WorldWideScience

Sample records for thermal degradation products

  1. Hydrogen and Carbon Black Production from the Degradation of Methane by Thermal Plasma

    Directory of Open Access Journals (Sweden)

    Leila Cottet

    2014-05-01

    Full Text Available Methane gas (CH4 is the main inducer of the so called greenhouse gases effect. Recent scientific research aims to minimize the accumulation of this gas in the atmosphere and to develop processes capable of producing stable materials with added value. Thermal plasma technology is a promising alternative to these applications, since it allows obtaining H2 and solid carbon from CH4, without the parallel formation of byproducts such as CO2 and NOx. In this work, CH4 was degraded by thermal plasma in order to produce hydrogen (H2 and carbon black. The degradation efficiency of CH4, selectivity for H2 production as well as the characterization of carbon black were studied. The best results were obtained in the CH4 flow rate of 5 L min-1 the degradation percentage and the selectivity for H2 production reached 98.8 % and 48.4 %, respectively. At flow rates of less than 5 L min-1 the selectivity for H2 production increases and reaches 91.9 %. The carbon black has obtained amorphous with hydrophobic characteristics and can be marketed to be used in composite material, and can also be activated chemically and/or physically and used as adsorbent material.

  2. Biological monitoring of aromatic diisocyanates in workers exposed to thermal degradation products of polyurethanes.

    Science.gov (United States)

    Rosenberg, Christina; Nikkilä, Kirsi; Henriks-Eckerman, Maj-Len; Peltonen, Kimmo; Engströrm, Kerstin

    2002-10-01

    Exposure to diisocyanates was assessed by biological monitoring among workers exposed to the thermal degradation products of polyurethanes (PURs) in five PUR-processing environments. The processes included grinding and welding in car repair shops, milling and turning of PUR-coated metal cylinders, injection moulding of thermoplastic PUR, welding and cutting of PUR-insulated district heating pipes during installation and joint welding, and heat-flexing of PUR floor covering. Isocyanate-derived amines in acid-hydrolysed urine samples were analysed as perfluoroacylated derivatives by gas chromatography mass spectrometry in negative chemical ionisation mode. The limits of quantification (LOQs) for the aromatic diamines 2,4- and 2,6-toluenediamine (2,4- and 2,6-TDA) and 4,4'-methylenedianiline (4,4'-MDA) were 0.25 nmol l(-1), 0.25 nmol l(-1) and 0.15 nmol l(-1), respectively. The LOQ for the aliphatic diamines hexamethylenediamine (HDA), isophoronediamine (IpDA) and 4,4'-diaminodicyclohexyl methane (4,4'-DDHM) was 5 nmol l(-1). TDA and MDA were detected in urine samples from workers in car repair shops and MDA in samples from workers welding district heating pipes. The 2,4-TDA isomer accounted for about 80% of the total TDA detected. No 2.6-TDA was found in the urine of non-exposed workers. The highest measured urinary TDA and MDA concentrations were 0.79 nmol mmol(-1) creatinine and 3.1 nmol mmol(-1) creatinine, respectively. The concentrations found among non-exposed workers were 0.08 nmol mmol(-1) creatinine for TDA and 0.05 nmol mmol(-1) creatinine for MDA (arithmetic means). Exposure to diisocyanates originating from the thermal degradation of PURs are often intermittent and of short duration. Nevertheless, exposure to aromatic diisocyanates can be identified by monitoring diisocyanate-derived amines in acid-hydrolysed urine samples.

  3. Nylon separators. [thermal degradation

    Science.gov (United States)

    Lim, H. S.

    1977-01-01

    A nylon separator was placed in a flooded condition in K0H solution and heated at various high temperatures ranging from 60 C to 110 C. The weight decrease was measured and the molecular weight and decomposition product were analyzed to determine: (1) the effect of K0H concentration on the hydrolysis rate; (2) the effect of K0H concentration on nylon degradation; (3) the activation energy at different K0H concentrations; and (4) the effect of oxygen on nylon degradation. The nylon hydrolysis rate is shown to increase as K0H concentration is decreased 34%, giving a maximum rate at about 16%. Separator hydrolysis is confirmed by molecular weight decrease in age of the batteries, and the reaction of nylon with molecular oxygen is probably negligible, compared to hydrolysis. The extrapolated rate value from the high temperature experiment correlates well with experimental values at 35 degrees.

  4. Analysis of annatto (Bixa orellana) food coloring formulations. 2. Determination of aromatic hydrocarbon thermal degradation products by gas chromatography.

    Science.gov (United States)

    Scotter, M J; Wilson, L A; Appleton, G P; Castle, L

    2000-02-01

    Twenty samples of commercial annatto formulations have been analyzed for m-xylene and toluene using ambient alkaline hydrolysis, followed by solvent extraction and capillary gas chromatography. Fifteen of the samples contained annatto during source extraction and processing, resulting in contamination by internal generation of both bixin and norbixin types with aromatic hydrocarbons. Two samples of norbixin of known production history (i. e., thermal versus nonthermal processes) were analyzed specifically to identify possible differences in their degradation component profiles. They were found to differ significantly in m-xylene content, which is consistent with their respective production histories.

  5. Thermal battery degradation mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Missert, Nancy A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brunke, Lyle Brent [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-09-01

    Diffuse reflectance IR spectroscopy (DRIFTS) was used to investigate the effect of accelerated aging on LiSi based anodes in simulated MC3816 batteries. DRIFTS spectra showed that the oxygen, carbonate, hydroxide and sulfur content of the anodes changes with aging times and temperatures, but not in a monotonic fashion that could be correlated to phase evolution. Bands associated with sulfur species were only observed in anodes taken from batteries aged in wet environments, providing further evidence for a reaction pathway facilitated by H2S transport from the cathode, through the separator, to the anode. Loss of battery capacity with accelerated aging in wet environments was correlated to loss of FeS2 in the catholyte pellets, suggesting that the major contribution to battery performance degradation results from loss of active cathode material.

  6. Thermal degradation of injectable epinephrine.

    Science.gov (United States)

    Church, W H; Hu, S S; Henry, A J

    1994-05-01

    The degradation of epinephrine in USP injectable cartridges was investigated under different heating conditions. Epinephrine (EPI) and EPI sulfonic acid (EPI-SA) levels in 1:10,000 (0.1 mg/mL) EPI injectable solutions subjected to either cyclical (65 degrees C for 8 hr/d for 4 to 12 weeks) or constant (65 degrees C for 7 days) heating were determined using high-pressure liquid chromatography with diode array and electrochemical detection. Constant (169 total hours of heat exposure) heating resulted in complete degradation of both compounds and dark brown discoloration of the solution. Cyclical heating (672 total hours of heat exposure) resulted in a 31% reduction in EPI concentration and a 225% increase in EPI-SA concentration with no discoloration of the solution. In laboratory-prepared solutions, the degradation of EPI and the formation of EPI-SA was found to be dependent on sodium metabisulfite concentration and the duration of cyclical heating. These results indicate that the thermal stability of EPI and the formation of EPI-SA depends on the method of heat exposure and the amount of bisulfite present in the solution.

  7. Thermal Degradation Studies of Polyurethane/POSS Nanohybrid Elastomers

    Energy Technology Data Exchange (ETDEWEB)

    Lewicki, J P; Pielichowski, K; TremblotDeLaCroix, P; Janowski, B; Todd, D; Liggat, J J

    2010-03-05

    Reported here is the synthesis of a series of Polyurethane/POSS nanohybrid elastomers, the characterization of their thermal stability and degradation behavior at elevated temperatures using a combination of Thermal Gravimetric Analysis (TGA) and Thermal Volatilization Analysis (TVA). A series of PU elastomers systems have been formulated incorporating varying levels of 1,2-propanediol-heptaisobutyl-POSS (PHIPOSS) as a chain extender unit, replacing butane diol. The bulk thermal stability of the nanohybrid systems has been characterized using TGA. Results indicate that covalent incorporation of POSS into the PU elastomer network increase the non-oxidative thermal stability of the systems. TVA analysis of the thermal degradation of the POSS/PU hybrid elastomers have demonstrated that the hybrid systems are indeed more thermally stable when compared to the unmodified PU matrix; evolving significantly reduced levels of volatile degradation products and exhibiting a {approx}30 C increase in onset degradation temperature. Furthermore, characterization of the distribution of degradation products from both unmodified and hybrid systems indicate that the inclusion of POSS in the PU network is directly influencing the degradation pathways of both the soft and hard block components of the elastomers: The POSS/PU hybrid systems show reduced levels of CO, CO2, water and increased levels of THF as products of thermal degradation.

  8. Photo, thermal and chemical degradation of riboflavin

    Directory of Open Access Journals (Sweden)

    Muhammad Ali Sheraz

    2014-08-01

    Full Text Available Riboflavin (RF, also known as vitamin B2, belongs to the class of water-soluble vitamins and is widely present in a variety of food products. It is sensitive to light and high temperature, and therefore, needs a consideration of these factors for its stability in food products and pharmaceutical preparations. A number of other factors have also been identified that affect the stability of RF. These factors include radiation source, its intensity and wavelength, pH, presence of oxygen, buffer concentration and ionic strength, solvent polarity and viscosity, and use of stabilizers and complexing agents. A detailed review of the literature in this field has been made and all those factors that affect the photo, thermal and chemical degradation of RF have been discussed. RF undergoes degradation through several mechanisms and an understanding of the mode of photo- and thermal degradation of RF may help in the stabilization of the vitamin. A general scheme for the photodegradation of RF is presented.

  9. Identification of volatile butyl rubber thermal-oxidative degradation products by cryofocusing gas chromatography/mass spectrometry (cryo-GC/MS).

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Jonell Nicole; White, Michael Irvin; Bernstein, Robert; Hochrein, James Michael

    2013-02-01

    Chemical structure and physical properties of materials, such as polymers, can be altered as aging progresses, which may result in a material that is ineffective for its envisioned intent. Butyl rubber formulations, starting material, and additives were aged under thermal-oxidative conditions for up to 413 total days at up to 124 ÀC. Samples included: two formulations developed at Kansas City Plant (KCP) (#6 and #10), one commercially available formulation (#21), Laxness bromobutyl 2030 starting material, and two additives (polyethylene AC-617 and Vanax MBM). The low-molecular weight volatile thermal-oxidative degradation products that collected in the headspace over the samples were preconcentrated, separated, and detected using cryofocusing gas chromatography mass spectrometry (cryo-GC/MS). The majority of identified degradation species were alkanes, alkenes, alcohols, ketones, and aldehydes. Observations for Butyl #10 aged in an oxygen-18 enriched atmosphere (18O2) were used to verify when the source of oxygen in the applicable degradation products was from the gaseous environment rather than the polymeric mixture. For comparison purposes, Butyl #10 was also aged under non-oxidative thermal conditions using an argon atmosphere.

  10. Thermal degradation of glucosinolates in red cabbage

    NARCIS (Netherlands)

    Oerlemans, K.; Barrett, D.M.; Bosch Suades, C.; Verkerk, R.; Dekker, M.

    2006-01-01

    Thermal degradation of individual glucosinolates within the plant matrix was studied. Red cabbage samples were heated at different temperatures for various times. To rule out the influence of enzymatic breakdown and to focus entirely on the thermal degradation of glucosinolates, myrosinase was

  11. Study of thermal degradation of vanadium and titanium acetylacetonate derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Dyagileva, L.M.; Tsyganova, E.I.; Mar' in, V.P.; Aleksandrov, Yu.A. (Gor' kovskij Gosudarstvennyj Univ. (USSR). Nauchno-Issledovatel' skij Inst. Khimii)

    1982-09-01

    Kinetics and products of vanadium (+3), vanadyl (+3) and titanium (+3) acetylacetonates thermal degradation have been studied in vapor phase in the closed system at 300-470 deg C. Gaseous composition of pyrolysis has been determined at different levels of decomposition. It is supposed that vanadium and metal vanadium mixed oxides become vanadium (+3) pyrolysis products. It is shown that metal oxidation level does not affect the thermal degradation rate. Central atom substitution leads to the change in thermal stability. Titanium (+3) acetylacetate derivatives are less stable than vanadium (+3) ones.

  12. Thermogravimetric assessment of thermal degradation in asphaltenes

    Energy Technology Data Exchange (ETDEWEB)

    Barneto, Agustín García, E-mail: agustin.garcia@diq.uhu.es [Department of Chemical Engineering, Physical Chemistry and Organic Chemistry, University of Huelva, Huelva (Spain); Carmona, José Ariza [Department of Chemical Engineering, Physical Chemistry and Organic Chemistry, University of Huelva, Huelva (Spain); Garrido, María José Franco [CEPSA, RDI Centre, Madrid (Spain)

    2016-03-20

    Graphical abstract: - Highlights: • Asphaltenes content of visbreaking streams in oil refinery can be measured by using TGA. • Deconvoluting TGA curves allows the thermal-based composition of asphaltenes to be elucidated. • Asphaltenes cracking involves acceleratory stages compatible with autocatalytic kinetic. • Activation energy during asphaltenes pyrolysis increased with increasing temperature. • Activation energy remained almost constant at 200–225 kJ/mol during oxidative cracking. - Abstract: Monitoring asphaltenes is very important with a view to optimizing visbreaking units in oil refineries. Current analyses based on selective dissolution in different solvents are slow, so new, more expeditious methods for measuring asphaltenes are required to facilitate fuel-oil production. In this work, we studied the thermal degradation of asphaltenes as the potential basis for a thermogravimetric method for their monitoring in visbreaking streams. The thermal degradation of asphaltenes occurs largely from 400 to 500 °C; the process is quite smooth in an inert environment but involves several fast mass loss events in the air. Kinetic parameters for characterizing the process were determined by using two model-free methods and the modified Prout–Tompkins kinetic equation to examine asphaltene thermolysis. Both types of methods showed the activation energy to increase during pyrolysis but to remain almost constant during cracking in the presence of oxygen or even diminish during char oxidation. Deconvoluting the thermogravimetric profiles revealed that asphaltene thermolysis in the air cannot be accurately described in terms of an nth order kinetic model because it involves some acceleratory phases. Also, thermogravimetric analyses of visbreaking streams revealed that char production in them is proportional to their asphaltene content. This relationship enables the thermogravimetric measurement of asphaltenes.

  13. Degradation Characterization of Thermal Interface Greases

    Energy Technology Data Exchange (ETDEWEB)

    Major, Joshua [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Narumanchi, Sreekant V [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Paret, Paul P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Blackman, Gregory [DuPont; Wong, Arnold [DuPont; Meth, Jeffery [DuPont

    2018-02-12

    Thermal interface materials (TIMs) are used in power electronics packaging to minimize thermal resistance between the heat generating component and the heat sink. Thermal greases are one such class. The conformability and thin bond line thickness (BLT) of these TIMs can potentially provide low thermal resistance throughout the operation lifetime of a component. However, their performance degrades over time due to pump-out and dry-out during thermal and power cycling. The reliability performance of greases through operational cycling needs to be quantified to develop new materials with superior properties. NREL, in collaboration with DuPont, has performed thermal and reliability characterization of several commercially available thermal greases. Initial bulk and contact thermal resistance of grease samples were measured, and then the thermal degradation that occurred due to pump-out and dry-out during temperature cycling was monitored. The thermal resistances of five different grease materials were evaluated using NREL's steady-state thermal resistance tester based on the ASTM test method D5470. Greases were then applied, utilizing a 2.5 cm x 2.5 cm stencil, between invar and aluminum plates to compare the thermomechanical performance of the materials in a representative test fixture. Scanning Acoustic microscopy, thermal, and compositional analyses were performed periodically during thermal cycling from -40 degrees C to 125 degrees C. Completion of this characterization has allowed for a comprehensive evaluation of thermal greases both for their initial bulk and contact thermal performance, as well as their degradation mechanisms under accelerated thermal cycling conditions.

  14. Degradation Characterization of Thermal Interface Greases

    Energy Technology Data Exchange (ETDEWEB)

    DeVoto, Douglas J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Major, Joshua [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Paret, Paul P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Blackman, Gregory S. [DuPont Experimental Station; Wong, Arnold [DuPont Experimental Station; Meth, Jeffery S. [DuPont Experimental Station

    2017-07-27

    Thermal interface materials (TIMs) are used in power electronics packaging to minimize thermal resistance between the heat generating component and the heat sink. Thermal greases are one such class. The conformability and thin bond line thickness (BLT) of these TIMs can potentially provide low thermal resistance throughout the operation lifetime of a component. However, their performance degrades over time due to pump-out and dry-out during thermal and power cycling. The reliability performance of greases through operational cycling needs to be quantified to develop new materials with superior properties. NREL, in collaboration with DuPont, has performed thermal and reliability characterization of several commercially available thermal greases. Initial bulk and contact thermal resistance of grease samples were measured, and then the thermal degradation that occurred due to pump-out and dry-out during temperature cycling was monitored. The thermal resistances of five different grease materials were evaluated using NREL's steady-state thermal resistance tester based on the ASTM test method D5470. Greases were then applied, utilizing a 2.5 cm x 2.5 cm stencil, between invar and aluminum plates to compare the thermomechanical performance of the materials in a representative test fixture. Scanning Acoustic microscopy, thermal, and compositional analyses were performed periodically during thermal cycling from -40 degrees Celcius to 125 degrees Celcius. Completion of this characterization has allowed for a comprehensive evaluation of thermal greases both for their initial bulk and contact thermal performance, as well as their degradation mechanisms under accelerated thermal cycling conditions.

  15. Degradation Characterization of Thermal Interface Greases: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    DeVoto, Douglas J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Major, Joshua [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Paret, Paul P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Blackman, G. S. [DuPont Experimental Station; Wong, A. [DuPont Experimental Station; Meth, J. S. [DuPont Experimental Station

    2017-08-03

    Thermal interface materials (TIMs) are used in power electronics packaging to minimize thermal resistance between the heat generating component and the heat sink. Thermal greases are one such class. The conformability and thin bond line thickness (BLT) of these TIMs can potentially provide low thermal resistance throughout the operation lifetime of a component. However, their performance degrades over time due to pump-out and dry-out during thermal and power cycling. The reliability performance of greases through operational cycling needs to be quantified to develop new materials with superior properties. NREL, in collaboration with DuPont, has performed thermal and reliability characterization of several commercially available thermal greases. Initial bulk and contact thermal resistance of grease samples were measured, and then the thermal degradation that occurred due to pump-out and dry-out during temperature cycling was monitored. The thermal resistances of five different grease materials were evaluated using NREL's steady-state thermal resistance tester based on the ASTM test method D5470. Greases were then applied, utilizing a 2.5 cm x 2.5 cm stencil, between invar and aluminum plates to compare the thermomechanical performance of the materials in a representative test fixture. Scanning Acoustic microscopy, thermal, and compositional analyses were performed periodically during thermal cycling from -40 degrees Celcius to 125 degrees Celcius. Completion of this characterization has allowed for a comprehensive evaluation of thermal greases both for their initial bulk and contact thermal performance, as well as their degradation mechanisms under accelerated thermal cycling conditions.

  16. Analysis of thermally-degrading, confined HMX

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, M.L.; Schmitt, R.G.; Renlund, A.M.

    1996-12-01

    The response of a thermally-degrading, confined HMX pellet is analyzed using a Reactive Elastic-Plastic (REP) constitutive model which is founded on the collapse and growth of internal inclusions resulting from physical and chemical processes such as forced displacement, thermal expansion, and/or decomposition. Axial stress predictions compare adequately to data. Deficiencies in the model and future directions are discussed.

  17. Thermal stability and kinetics of degradation of deoxynivalenol, deoxynivalenol conjugates and ochratoxin A during baking of wheat bakery products.

    Science.gov (United States)

    Vidal, Arnau; Sanchis, Vicente; Ramos, Antonio J; Marín, Sonia

    2015-07-01

    The stability of deoxynivalenol (DON), deoxynivalenol-3-glucoside (DON-3-glucoside), 3-acetyldeoxynivalenol (3-ADON), 15-acetyldeoxynivalenol (15-ADON), de-epoxy-deoxynivalenol (DOM-1) and ochratoxin A (OTA) during thermal processing has been studied. Baking temperature, time and initial mycotoxin concentration in the raw materials were assayed as factors. An improved UPLC-MS/MS method to detect DON, DON-3-glucoside, 3-ADON, 15-ADON and DOM-1 in wheat baked products was developed in the present assay. The results highlighted the importance of temperature and time in mycotoxin stability in heat treatments. OTA is more stable than DON in a baking treatment. Interestingly, the DON-3-glucoside concentrations increased (>300%) under mild baking conditions. On the other hand, it was rapidly reduced under harsh conditions. The 3-ADON decreased during the heat treatment; while DOM-1 increased after the heating process. Finally, the data followed first order kinetics for analysed mycotoxins and thermal constant rates (k) were calculated. This parameter can be a useful tool for prediction of mycotoxin levels. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Thermal degradation process of polysulfone aramid fiber

    OpenAIRE

    Zhu Fang-Long; Feng Qian-Qian; Xin Qun; Zhou Yu

    2014-01-01

    Polysulfone aramid fiber is one kind of high temperature fibers. In the paper, thermal degradation behavior and kinetics of polysulfone aramid fiber were investigated by thermogravimetric analysis and differential thermogravimetric at different heating rates under nitrogen and air, respectively. The experimental results show that its initial degradation temperature is 375°C in nitrogen and 410°C in air at heating rate of 10 K/min. When temperature went to 8...

  19. Determination of Polymers Thermal Degradation by Color Change Analysis

    Directory of Open Access Journals (Sweden)

    Andrés Felipe Rojas González

    2016-01-01

    Full Text Available Context: It has been observed that thermal degradation of thermoplastic polymers, when they are reprocessed by injection, extrusion and extrusion / injection, undergo color changes in the product, although it not has been established as this change occurs. Method: It analyzed the effect on thermal degradation caused by polymer type, processing type, polymer grade, rotation speed of the extrusion screw and number of reprocessing, which is quantified by the color change using an empirical equation, with experimental data obtained by analysis through a microcolor colorimeter. Results: It was found that the color change analysis provides information about progress of the thermal degradation and stability of thermoplastic polymers, which are undergoing to multiple reprocessing events and processes. Conclusions: It was established that this technique can be implemented as a simple and efficient measure of thermoplastic products quality control, according to their color change.

  20. Single gene retrieval from thermally degraded DNA

    Indian Academy of Sciences (India)

    Unknown

    To simulate single gene retrieval from ancient DNA, several related factors have been investigated. By monitoring a. 889 bp polymerase chain reaction (PCR) product and genomic DNA degradation, we find that heat and oxygen. (especially heat) are both crucial factors influencing DNA degradation. The heat influence ...

  1. Single gene retrieval from thermally degraded DNA

    Indian Academy of Sciences (India)

    To simulate single gene retrieval from ancient DNA, several related factors have been investigated. By monitoring a 889 bp polymerase chain reaction (PCR) product and genomic DNA degradation, we find that heat and oxygen (especially heat) are both crucial factors influencing DNA degradation. The heat influence ...

  2. Thermally triggered degradation of transient electronic devices.

    Science.gov (United States)

    Park, Chan Woo; Kang, Seung-Kyun; Hernandez, Hector Lopez; Kaitz, Joshua A; Wie, Dae Seung; Shin, Jiho; Lee, Olivia P; Sottos, Nancy R; Moore, Jeffrey S; Rogers, John A; White, Scott R

    2015-07-01

    Thermally triggered transient electronics using wax-encapsulated acid, which enable rapid device destruction via acidic degradation of the metal electronic components are reported. Using a cyclic poly(phthalaldehyde) (cPPA) substrate affords a more rapid destruction of the device due to acidic depolymerization of cPPA. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Thermal degradation process of polysulfone aramid fiber

    Directory of Open Access Journals (Sweden)

    Zhu Fang-Long

    2014-01-01

    Full Text Available Polysulfone aramid fiber is one kind of high temperature fibers. In the paper, thermal degradation behavior and kinetics of polysulfone aramid fiber were investigated by thermogravimetric analysis and differential thermogravimetric at different heating rates under nitrogen and air, respectively. The experimental results show that its initial degradation temperature is 375°C in nitrogen and 410°C in air at heating rate of 10 K/min. When temperature went to 800°C, the fiber loses all mass in air. The mass losses in the stage showed that degradation of polysulfone aramid occurs in two-step process as could be concluded by the presence of two distinct exothermic peaks in differential thermogravimetric curves.

  4. [DNA degradation during standard alkaline of thermal denaturation].

    Science.gov (United States)

    Drozhdeniuk, A P; Sulimova, G E; Vaniushin, B F

    1976-01-01

    Essential degradation 8 DNA (up to 10 per cent) with liberation of acid-soluble fragments takes place on the standard alkaline (0,01 M sodium phosphate, pH 12, 60 degrees, 15 min) or thermal (0.06 M sodium phosphate buffer, pH 6.8, 102 degrees C, 15 min) denaturation. This degradation is more or less selective: fraction of low molecular weight fragments, isolated by hydroxyapatite cromatography and eluted by 0.06 M sodium phosphate buffer, pH 6.8 is rich in adenine and thymine and contains about 2 times less 5-methylcytosine than the total wheat germ DNA. The degree of degradation of DNA on thermal denaturation is higher than on alkaline degradation. Therefore while studying reassociation of various DNA, one and the same standard method of DNA denaturation should be used. Besides, both the level of DNA degradation and the nature of the resulting products (fragments) should be taken into account.

  5. Aging Effects and Estimating Degradation Mechanisms of Thermally Upgraded Paper in Mineral Oil

    Science.gov (United States)

    Miyagi, Katsunori; Oe, Etsuo; Yamagata, Naoki

    The life of a transformer is limited to the deterioration of its solid insulation. Winding conductors and other solid insulation materials in oil-immersed transformers have been insulated using cellulose products. For many years, manufacturers have met the needs of special applications by designing transformers using thermally upgraded materials to achieve lighter weight, higher power density and increased life. Recently, the effect of thermally upgraded insulation on diagnostic techniques such as gas-in oil analysis, and their indication of insulation degradation have been reviewed. This paper describes evaluations of the thermal degradation characteristics and decomposition reactions in mineral transformer oil of amine-impregnated thermally upgraded paper insulation. The thermal resistance of the thermally upgraded paper is evaluated by comparison with Kraft paper insulation. Further, aging degradation mechanisms of decompositional degradation of the thermally upgraded paper due to aging in mineral transformer oil are proposed.

  6. Thermal degradation kinetics of bixin in an aqueous model system.

    Science.gov (United States)

    Rios, Alessandro de O; Borsarelli, Claudio D; Mercadante, Adriana Z

    2005-03-23

    The kinetics of the thermal degradation of the natural cis carotenoid bixin in a water/ethanol (8:2) solution was studied as a function of temperature (70-125 degrees C), using high-performance liquid chromatography. The curves for the decay of bixin and formation of products (e.g., di-cis and all-trans isomers and a C17 degradation compound) did not adjust well to a first-order rate law, but very good fits were obtained using a biexponential model. This mathematical modeling gave the rate constant values for the formation of the primary products from bixin, and the energy barrier for each step was obtained. The di-cis isomers were formed immediately (15 kcal/mol) together with the decay of bixin, followed by a slow consumption, indicating their role as reaction intermediates. In fact, the di-cis isomers could easily revert to bixin (Ea approximately 3 kcal/mol) or yield the primary C17 degradation product, with an energy barrier of 6.5 kcal/mol. In turn, 24 kcal/mol was necessary for the Bix --> all-trans step, explaining its slower formation.

  7. Spectral and Thermal Degradation of Melamine Cyanurate

    Directory of Open Access Journals (Sweden)

    V. Sangeetha

    2013-01-01

    Full Text Available Melamine cyanurate, an organic crystalline complex was, synthesized by evaporation of an aqueous solution containing equimolar quantities of melamine and cyanuric acid. The synthesized compound has been subjected to various characterizations like Powder XRD, FT-IR, TG-DTG, SEM, and SHG. The presence of sharp diffraction peaks in the XRD confirms that the products are highly crystalline. The average particle size was calculated using the Debye-Scherrer formula, and it was found to be 3.067 μm. Thermal behavior of the grown crystal has been studied by TG-DTG analysis. From TG-DTG, it is found that the title crystal possesses good thermal stability. The activation energy was calculated using the Broido, Coats-Redfern, and Horowitz-Metzger methods. A sharp peak exothermic peak at 405.40°C was assigned as the melting point of the title material. SEM reveals the morphology of the synthesized salt. No detectable signal was observed during the Kurtz-Perry technique.

  8. Workers exposed to thermal degradation products of TDI- and MDI-based polyurethane: biomonitoring of 2,4-TDA, 2,6-TDA, and 4,4'-MDA in hydrolyzed urine and plasma.

    Science.gov (United States)

    Dalene, M; Skarping, G; Lind, P

    1997-08-01

    The aim of the study was to investigate biomarkers of exposure to thermal degradation products of 2,4- and 2,6-toluene diisocyanate (TDI)- and 4,4'-methylenediphenyl diisocyanate (MDI)-based polyurethane and the toxicokinetics of these products. Blood and urine were collected from 15 factory workers exposed to thermal degradation products of MDI-based polyurethane glue and TDI-based flexible foam. Four of these workers were also studied during an exposure-free period. Urine and plasma were analyzed after acidic hydrolysis and the concentrations of the isocyanates' corresponding amines, 2,4-, 2,6-toluenediamine (TDA), and 4,4'-methylenedianiline (MDA), were determined as derivatives of pentafluoropropionic anhydride by gas chromatography using chemical ionization mass spectrometry monitoring negative ions. Urinary elimination rates were in the range of TDA per hour, TDA per hour, and TDA per mL, TDA per mL, and TDA, 2,6-TDA, and 4,4'-MDA in urine varied during and between workdays. The individual variation in plasma concentrations of 2,4-TDA, 2,6-TDA, and 4,4'-MDA with time was small, but between individuals the variation was great.

  9. Degradation Behavior of Thermal Stabilized Polyacrylonitrile Fibers

    Directory of Open Access Journals (Sweden)

    LEI Shuai

    2017-05-01

    Full Text Available In the temperature range of 300-800℃, 40%-50% of the mass lost during the processing of polyacrylonitrile based carbon fiber (PANCF. Understanding the degradation behavior will be valuable in understanding the formation mechanism of pseudo-graphite structure, and providing theoretic basis for producing high performance carbon fiber and increasing the carbonization yield. The simulation of the degradation progress was carried out on the thermogravimetric analyzer (TGA, the results show that there are two degradation steps for PAN fiber stabilized in air, and controlled by cyclization coefficient and oxygen content. The cyclization coefficient and oxygen content are effective to the density of carbon fiber by influencing the degradation behavior, which cause defects in the fiber. The higher cyclization coefficient leads to form less structural defects and higher density of the fiber; on the contrary, the higher oxygen content leads to form more structural defects and lower density of the fiber.

  10. Thermal Degradation of Thermoplastic Polyurethane Modified with Polycarbonate

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, H.J. [Inha University, Inchon (Korea); Cha, Y.J. [BAIKSAN CO. LTD., Ansan (Korea); Choe, S.J. [Inha University, Inchon (Korea)

    2000-05-01

    Thermal degradation of thermoplastic polyurethane modified polycarbonate has been investigated by means of DSC, GPC and FT-IR techniques. The polyurethanes used in this study are TPU-35 and TPU-53 containing 35.5 and 53.4 wt % of hard segments, respectively. The more content of hard segment, the higher the glass transition temperature (T{sub g}) of TPU was observed. On the other hand, the T{sub g} of the TPU modified PC decreased with the content of TPU and the annealing temperature regardless of the hard segment contents. The latter behavior may arise from the thermal degradation of TPU upon annealing process: the observed thermal degradation temperatures were at 240 and 250 deg. C D for the PC/TPU-35 and PC/TPU-53, respectively. The molecular weight, molecular weight distribution and viscosity agree well with the DSC measurement, which implicates a thermal degradation of TPU. In addition, thermal stability of the TPU modified PC linearly decreased with an incorporation of TPU. Transesterification or any interaction was not observed using FT-IR: the evidence was no frequency shift or any variance between the carbonyl stretching and NH group. For the specimens prepared below the degradation temperature, the enhancement of the thickness dependent impact strength of the PC/TPU blend was observes, and the morphology of the two blends was compared. (author). 19 refs., 2 tabs., 12 figs.

  11. Thermal degradation kinetics and solid state, temperature ...

    Indian Academy of Sciences (India)

    WINTEC

    Phenothiazine derivatives belong to a big group of aromatic compounds. These derivatives are substituted in ... Elemental analysis for carbon, hydrogen, nitrogen and sulphur were done using Vario EL III CHNS ... The aim of the kinetic study of thermal analysis data is to find out the most probable kinetic model which best ...

  12. synthesis, characterization and thermal degradation of oligo

    African Journals Online (AJOL)

    Preferred Customer

    more than 60 years because of useful properties such as paramagnetism, semiconductivity, and electrochemical properties. Because of these properties, they are used to prepare composites having high thermal stability [1], graphite materials, adhesives, epoxy oligomer and block copolymers, photoresists [2], and materials ...

  13. Thermal and chemical degradation of inorganic membrane materials. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, G.N.; Sanjurjo, A.; Wood, B.J.; Lau, K.H.

    1994-04-01

    This report describes the results of a literature review to evaluate the long-term thermal and chemical degradation of inorganic membranes that are being developed to separate gaseous products produced by the gasification or combustion of coal in fixed-, fluidized-, and entrained-bed gasifiers, direct coal-fired turbines, and pressurized-fluidized-bed combustors. Several impurities, such as H{sub 2}S, NH{sub 3}, SO{sub 2}, NO{sub x}, and trace metal compounds are generated during coal conversion, and they must be removed from the coal gas or the combustor flue gas to meet environmental standards. The use of membranes to separate these noxious gases is an attractive alternative to their removal by sorbents such as zinc titanate or calcium oxide. Inorganic membranes that have a high separation efficiency and exhibit both thermal and chemical stability would improve the economics of power generation from coal. The U.S. Department of Energy is supporting investigations to develop inorganic membranes for separating hydrogen from coal gas streams and noxious impurities from hot coal- and flue-gas streams. Membrane materials that have been investigated in the past include glass (silica), alumina, zirconia, carbon, and metals (Pd and Pt).

  14. Thermal Degradation of Filler/PP Composite and Its Depression

    Science.gov (United States)

    Hosoi, Hiroshi; Funami, Fumiyasu; Yasuda, Naoki; Nomura, Manabu; Yui, Hiroshi; Ikuta, Nobuo

    To examine thermal degradation accelerated by filling inorganic particles in polypropylene (PP), the composites were made with three types of inorganic powders : talc, magnesium hydroxide, and mica. They were easily degraded with the fillers in this order in the thermal aging test. A commercial heat resistance agent, ‘Plenlizer MK-400’, was added while making the composites. The degradation resistance of the agent remarkably appeared in the reverse order. That is, thermal degradation was most depressed in talc-filled composite with the agent. In another experience, soxhlet extraction was carried out to the filler with an organic solvent, o-xylene, that was able to dissolve PP. A lot of inorganic ions were detected in the extractant. In particular, the detected amount of aluminum ion increased in the order of talc, magnesium hydroxide, and mica. This order was the same as the fillers indicated by the degree of degradation. Infrared analysis of the agent with inorganic ions in chloroform showed that the peaks due to the agent were much stronger with aluminum ion than those with iron ion. These results suggested that a cause of degradation was aluminum ion dispersed from particles to PP matrix during the molding.

  15. Thermal degradation of PVC: A review.

    Science.gov (United States)

    Yu, Jie; Sun, Lushi; Ma, Chuan; Qiao, Yu; Yao, Hong

    2016-02-01

    This review summarized various chemical recycling methods for PVC, such as pyrolysis, catalytic dechlorination and hydrothermal treatment, with a view to solving the problem of energy crisis and the impact of environmental degradation of PVC. Emphasis was paid on the recent progress on the pyrolysis of PVC, including co-pyrolysis of PVC with biomass/coal and other plastics, catalytic dechlorination of raw PVC or Cl-containing oil and hydrothermal treatment using subcritical and supercritical water. Understanding the advantage and disadvantage of these treatment methods can be beneficial for treating PVC properly. The dehydrochlorination of PVC mainly happed at low temperature of 250-320°C. The process of PVC dehydrochlorination can catalyze and accelerate the biomass pyrolysis. The intermediates from dehydrochlorination stage of PVC can increase char yield of co-pyrolysis of PVC with PP/PE/PS. For the catalytic degradation and dechlorination of PVC, metal oxides catalysts mainly acted as adsorbents for the evolved HCl or as inhibitors of HCl formation depending on their basicity, while zeolites and noble metal catalysts can produce lighter oil, depending the total number of acid sites and the number of accessible acidic sites. For hydrothermal treatment, PVC decomposed through three stages. In the first region (T<250°C), PVC went through dehydrochlorination to form polyene; in the second region (250°C

  16. Thermal Degradation Kinetics of Sugarcane Bagasse and Soft Wood Cellulose

    Directory of Open Access Journals (Sweden)

    Samson M. Mohomane

    2017-10-01

    Full Text Available The properties of untreated sugar cane bagasse (SCB and soft wood (SW and their respective celluloses were investigated. The celluloses indicated improved crystallinity index values and decreased concentration of lignin and hemicellulose compared to their untreated counterparts. Three degradation models, Kissinger-Akahira-Sunose (KAS, Flynn-Wall-Ozawa (OFW, and Kissinger (KGR methods were employed to determine apparent activation energy values. Generally, the thermal degradation processes of both sugarcane bagasse and soft wood included dehydration, degradation of hemicellulose and cellulose, whereas the lignin degraded from the degradation temperature of hemicellulose to the end of the cellulose. The apparent activation energy values obtained from the OFW and KAS models vary with the degree of conversion, and showed similar trends. The activation energies obtained by KGR were relatively lower than those obtained from the KAS and OFW methods.

  17. Thermal stability and degradation of poly (N-phenylpropionamide homopolymer and copolymer of N-phenylpropionamide with methyl methacrylate

    Directory of Open Access Journals (Sweden)

    M.A. Diab

    2017-05-01

    Full Text Available Different concentrations of copolymer of (N-phenylpropionamide (PA with methyl methacrylate (MMA were prepared and the reactivity ratio values of copolymerization were calculated using the 1H-NMR technique. Thermal analysis of the copolymers showed that the thermal stability is an intermediate between poly(N-phenylpropionamide and poly(methyl methacrylate homopolymers. Thermal degradation products of the PPA were identified by GC–MS techniques. It seems that the mechanism of degradation of PPA homopolymer is characterized by free radical formation followed by recombination along the backbone chain. The activation energies of the thermal degradation of the copolymers were calculated using the Arrhenius relationship.

  18. Liquid chromatography and liquid chromatography-mass spectrometry analysis of donepezil degradation products

    Directory of Open Access Journals (Sweden)

    Mladenović Aleksandar R.

    2015-01-01

    Full Text Available This study describes the investigation of degradation products of donepezil (DP using stability indicating RP-HPLC method for determination of donepezil, which is a centrally acting reversible acetylcholinesterase inhibitor. In order to investigate the stability of drug and formed degradation products, a forced degradation study of drug sample and finished product under different forced degradation conditions has been conducted. Donepezil hydrochloride and donepezil tablets were subjected to stress degradation conditions recommended by International Conference on Harmonization (ICH. Donepezil hydrochloride solutions were subjected to acid and alkali hydrolysis, chemical oxidation and thermal degradation. Significant degradation was observed under alkali hydrolysis and oxidative degradation conditions. Additional degradation products were observed under the conditions of oxidative degradation. The degradation products observed during forced degradation studies were monitored using the high performance liquid chromatography (HPLC method developed. The parent method was modified in order to obtain LC-MS compatible method which was used to identify the degradation products from forced degradation samples using high resolution mass spectrometry. The mass spectrum provided the precise mass from which derived molecular formula of drug substance and degradation products formed and proved the specificity of the method unambiguously. [Projekat Ministarstva nauke Republike Srbije, br. 172013

  19. LC, LC-MS/MS studies for the identification and characterization of degradation products of hydrochlorothiazide and establishment of mechanistic approach towards degradation

    OpenAIRE

    Mahajan,Anand Avinash; Thaker,Anil Keshavlal; Mohanraj,Krishnapriya

    2012-01-01

    The objective of the present investigation was to separate, identify and characterize the degradation products of hydrochlorothiazide under hydrolytic, oxidative, photolytic and thermal stress conditions as per the International Conference on Harmonization (ICH) guideline Q1A (R2). The drug degraded under acidic, basic, neutral and oxidative stress, while it was stable under photolytic and thermal stress conditions. Two degradation products were formed, which were separated by using HPLC on C...

  20. modelling of thermal degradation kinetics of ascorbic acid in ...

    African Journals Online (AJOL)

    Administrator

    dried, cooked, canned and frozen fruit and vegetables are a ... Samuel E. Agarry, Biochemical Engineering Research Laboratory, Department of Chemical .... Table 1: Rate Constants for Thermal Degradation of Ascorbic Acid in Potato and Pawpaw at Various. Temperatures. Food Material. T oC. ) (min. 10. 1. 3. −. −. xK. T.

  1. An investigation about the solid state thermal degradation of acetylsalicylic acid: polymer formation

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Edna M. de A; Melo, Dulce M. de A; Moura, Maria de F.V. de; Farias, Robson F. de

    2004-05-06

    An investigation about the thermal degradation of acetylsalicylic acid (ASA) is performed. It is verified that the thermal degradation of ASA produces not only salicylic acid (SA) and acetic acid (AA) as products but also an ASA polymer, which is transparent and solid. And also verified that the temperature in which the polymer is obtained influences its physical consistence (solid or semi-solid). Furthermore, the ASA polymer is very stable from a thermic point of view, as verified by TG and DSC analysis. X-ray diffraction patterns obtained for the ASA polymer show that it exhibits a low crystallinity.

  2. Using kinetic models to predict thermal degradation of fire-retardant-treated plywood roof sheathing

    Science.gov (United States)

    Patricia Lebow; Jerrold E. Winandy; Patricia K. Lebow

    2003-01-01

    Between 1985-1995 a substantial number of multifamily housing units in the Eastern and Southern U.S. experienced problems with thermally degraded fire-retardant-treated (FRT) plywood roof sheathing. A series of studies conducted at the USDA Forest Service, Forest Products Laboratory (FPL), examined the materials, chemical mechanisms, and process implications and has...

  3. Study of the thermal degradation of citrus seeds

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Montoya, V. [Centro de Quimica, Instituto de Ciencias, Universidad Autonoma de Puebla, Apdo. Postal J-55, Puebla 72570, Pue (Mexico); Instituto Nacional del Carbon, CSIC, Apartado 73, E-33080 Oviedo (Spain); Montes-Moran, M.A. [Instituto Nacional del Carbon, CSIC, Apartado 73, E-33080 Oviedo (Spain); Elizalde-Gonzalez, M.P. [Centro de Quimica, Instituto de Ciencias, Universidad Autonoma de Puebla, Apdo. Postal J-55, Puebla 72570, Pue (Mexico)

    2009-09-15

    The citrus seeds are one of the principal residues in the juice industry and their utilization can decrease significantly the problems of their final disposal. In this work the thermal degradation of three Mexican citrus seeds: orange (Citrus sinensis), lemon (Citrus Limon) and grapefruit (Citrus paradisi) was studied in nitrogen atmosphere. The two components (embryo and husk) of the seeds were characterized separately. The results showed that the thermal effects are very similar between the three embryos and the three husks. The embryos show higher degradability, superior content of nitrogen and higher heating value than the husks. The thermal degradation of the components of the three seeds is completed at 600 C and it is considered to be a global process derived from the decomposition of their principal components (cellulose, hemicellulose and lignin). The results suggest that mixing the three entire seeds will not lead to a severe deviation from their individual thermal behavior and that the industry could apply them for carbonization purposes. (author)

  4. Four new degradation products of doxorubicin: An application of forced degradation study and hyphenated chromatographic techniques

    Directory of Open Access Journals (Sweden)

    Dheeraj Kaushik

    2015-10-01

    Full Text Available Forced degradation study on doxorubicin (DOX was carried out under hydrolytic condition in acidic, alkaline and neutral media at varied temperatures, as well as under peroxide, thermal and photolytic conditions in accordance with International Conference on Harmonization (ICH guidelines Q1(R2. It was found extremely unstable to alkaline hydrolysis even at room temperature, unstable to acid hydrolysis at 80 °C, and to oxidation at room temperature. It degraded to four products (O-I–O-IV in oxidative condition, and to single product (A-I in acid hydrolytic condition. These products were resolved on a C8 (150 mm×4.6 mm, 5 µm column with isocratic elution using mobile phase consisting of HCOONH4 (10 mM, pH 2.5, acetonitrile and methanol (65:15:20, v/v/v. Liquid chromatography–photodiode array (LC–PDA technique was used to ascertain the purity of the products noted in LC–UV chromatogram. For their characterization, a six stage mass fragmentation (MS6 pattern of DOX was outlined through mass spectral studies in positive mode of electrospray ionization (+ESI as well as through accurate mass spectral data of DOX and the products generated through liquid chromatography–time of flight mass spectrometry (LC–MS–TOF on degraded drug solutions. Based on it, O-I–O-IV were characterized as 3-hydroxy-9-desacetyldoxorubicin-9-hydroperoxide, 1-hydroxy-9-desacetyldoxorubicin-9-hydroperoxide, 9-desacetyldoxorubicin-9-hydroperoxide and 9-desacetyldoxorubicin, respectively, whereas A-I was characterized as deglucosaminyl doxorubicin. While A-I was found to be a pharmacopoeial impurity, all oxidative products were found to be new degradation impurities. The mechanisms and pathways of degradation of doxorubicin were outlined and discussed.

  5. Synthesis and thermal degradation Kinetics of D - (+ - galactose containing polymers

    Directory of Open Access Journals (Sweden)

    Fehmi Saltan

    2013-01-01

    Full Text Available In this study, it is investigated the synthesis and characterizations of polymerizable vinyl sugars. Carbohydrate containing polymers were synthesized via free radical polymerization. Thermal behavior of polymer derivatives was analyzed by using DSC and TG. Molecular weight dispersion of polymer derivatives was also analyzed with GPC. Molecular structures were analyzed by FT-IR and 1H-NMR spectrophotometer. We found that molecular weight of copolymers could effect to the thermal stability. According to TG data related to the copolymers, molecular weight of polymers increased while the thermal stability decreased. Thermogravimetric analysis of polymers also investigated. The apparent activation energies for thermal degradation of carbohydrate containing polymers were obtained by integral methods (Flynn - Wall - Ozawa, Kissinger - Akahira - Sunose, and Tang.

  6. Thermal degradation of poly({alpha}-methylstyrene) in solution. [Quarterly report, July--September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Madras, G.; Smith, J.M.; McCoy, B.J.

    1995-11-11

    The thermal degradation of poly({alpha}-methylstyrene) in solution was investigated at various temperatures (150-225 C) and polymer concentrations (2.00-20.0 g/L) at 6.8 MPa (1000 psig). The molecular weight distributions (MWDs) of the reacted polymer at these conditions were examined at four different residence times. Experimental data indicated that the polymer degraded to its monomer, {alpha}-methylstyrene. No other degradation products were observed. Continuous-mixture kinetics was used to examine the MWDs and to obtain the rate coefficient for degradation and its activation energy. The rate was first-order in polymer concentration with a rate constant at 225 C of 0.01 min{sup {minus} 1} and an activation energy of 66.5 kJ/mol (16.0 kcal/mol). The maximum conversion observed at 275 C was 1.2%. Hydrogen-donor solvent, tetralin, had no effect on the degradation.

  7. Thermal desorption-gas chromatography-mass spectrometry methods and strategy for screening of chemical warfare agents, their precursors and degradation products in environmental, industrial and waste samples

    NARCIS (Netherlands)

    Terzic, O.

    2016-01-01

    The Organisation for the Prohibition of Chemical Weapons (OPCW) is the international organisation set to oversee the implementation of the Chemical Weapons Convention treaty that prohibits the development, production, acquisition, stockpiling, retention, transfer or use of chemical weapons by States

  8. Thermal degradation of polymer systems having liquid crystalline oligoester segment

    Directory of Open Access Journals (Sweden)

    Renato Matroniani

    Full Text Available Abstract Block copolymers and blends comprised by liquid crystalline oligoester and polystyrene were prepared and their thermal stability were characterized by thermogravimetric analysis (TGA. The samples have shown three main decomposition temperatures due to (1 lost of flexible chain and decomposition of mesogenic segment, (2 decomposition of polystyrene and (3 final decomposition of oligoester rigid segment. Both copolymers and polymer blends presented lower thermal stability compared to polystyrene and oligoester. The residual mass after heating at 600 °C in copolymers and polymer blends were lower than those found in the oligoesters. A degradative process of aromatic segments of oligoester induced by decomposition of polystyrene is suggested.

  9. Non-isothermal kinetics of thermal degradation of chitosan

    Directory of Open Access Journals (Sweden)

    Georgieva Velyana

    2012-08-01

    Full Text Available Abstract Background Chitosan is the second most abundant nitrogen containing biopolymer in nature, obtained from the shells of crustaceans, particularly crabs, shrimp and lobsters, which are waste products of seafood processing industries. It has great potential application in the areas of biotechnology, biomedicine, food industries, and cosmetics. Chitosan is also capable of adsorbing a number of metal ions as its amino groups can serve as chelation sites. Grafted functional groups such as hydroxyl, carboxyl, sulfate, phosphate, and amino groups on the chitosan have been reported to be responsible for metal binding and sorption of dyes and pigments. The knowledge of their thermal stability and pyrolysis may help to better understand and plan their industrial processing. Results Thermogravimetric studies of chitosan in air atmosphere were carried out at six rates of linear increasing of the temperature. The kinetics and mechanism of the thermal decomposition reaction were evaluated from the TG data using recommended from ICTAC kinetics committee iso-conversional calculation procedure of Kissinger-Akahira-Sunose, as well as 27 mechanism functions. The comparison of the obtained results showed that they strongly depend on the selection of proper mechanism function for the process. Therefore, it is very important to determine the most probable mechanism function. In this respect the iso-conversional calculation procedure turned out to be the most appropriate. Conclusion Chitosan have excellent properties such as hydrophilicity, biocompatibility, biodegradability, antibacterial, non-toxicity, adsorption application. The thermal degradation of chitosan occurs in two stages. The most probable mechanism function for both stages is determined and it was best described by kinetic equations of n-th order (Fn mechanism. For the first stage, it was established that n is equal to 3.0 and for the second stage – to 1.0 respectively. The values of the

  10. Degradation of chitosan hydrogel dispersed in dilute carboxylic acids by solution plasma and evaluation of anticancer activity of degraded products

    Science.gov (United States)

    Chokradjaroen, Chayanaphat; Rujiravanit, Ratana; Theeramunkong, Sewan; Saito, Nagahiro

    2018-01-01

    Chitosan is a polysaccharide that has been extensively studied in the field of biomedicine, especially its water-soluble degraded products called chitooligosaccharides (COS). In this study, COS were produced by the degradation of chitosan hydrogel dispersed in a dilute solution (i.e., 1.55 mM) of various kinds of carboxylic acids using a non-thermal plasma technology called solution plasma (SP). The degradation rates of chitosan were influenced by the type of carboxylic acids, depending on the interaction between chitosan and each carboxylic acid. After SP treatment, the water-soluble degraded products containing COS could be easily separated from the water-insoluble residue of chitosan hydrogel by centrifugation. The production yields of the COS were mostly higher than 55%. Furthermore, the obtained COS products were evaluated for their inhibitory effect as well as their selectivity against human lung cancer cells (H460) and human lung normal cells (MRC-5).

  11. Influence of enzyme and chemical adsorption on the thermal degradation path for eucalyptus pulp

    Energy Technology Data Exchange (ETDEWEB)

    Barneto, Agustin G., E-mail: agustin.garcia@diq.uhu.es [Chemical Engineering Department, El Carmen Campus, University of Huelva, 21071 Huelva (Spain); Valls, Cristina [Textile and Paper Engineering Department, Universitat Politecnica de Catalunya, Colom 11, E-08222 Terrassa (Spain); Ariza, Jose [Chemical Engineering Department, El Carmen Campus, University of Huelva, 21071 Huelva (Spain); Roncero, M. Blanca [Textile and Paper Engineering Department, Universitat Politecnica de Catalunya, Colom 11, E-08222 Terrassa (Spain)

    2013-01-10

    Highlights: Black-Right-Pointing-Pointer Enzymes and chemicals adsorption changes thermal degradation path of cellulose. Black-Right-Pointing-Pointer Adsorptions on pulp fibres increase their amorphous cellulose content. Black-Right-Pointing-Pointer Charring/volatilization ratio of pulp is affected by adsorptions. - Abstract: Changes in thermal degradation path of eucalyptus pulp support enzymes (laccase from Trametes villosa) and chemicals (Tris-HCl or tartrate-tartaric buffer) adsorption on cellulose during biobleaching, thereby increasing cellulose amount that degrades at low temperature and decreasing the apparent crystallinity (ApC) of cellulose crystallites. Changes in ApC, which can be assessed by thermogravimetric analysis -but not X-ray diffraction spectroscopy-affect cellulose volatilization; thus, the higher ApC is, the lower is char production and the higher the volatilization temperature. A linear relationship between ApC and the volatilization/charring ratio (V/C) was observed in this work.

  12. Application of non-thermal plasma reactor and Fenton reaction for degradation of ibuprofen

    Energy Technology Data Exchange (ETDEWEB)

    Marković, Marijana [Center of Chemistry, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Studentski trg 12-16, 11000 Belgrade (Serbia); Jović, Milica; Stanković, Dalibor [Innovation Center, Faculty of Chemistry, University of Belgrade, P.O. Box 51, 11058 Belgrade 118 (Serbia); Kovačević, Vesna [Faculty of Physics, University of Belgrade, P.O. Box 44, 11000 Belgrade (Serbia); Roglić, Goran [Faculty of Chemistry, University of Belgrade, P.O. Box 51, 11058 Belgrade 118 (Serbia); Gojgić-Cvijović, Gordana [Center of Chemistry, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Studentski trg 12-16, 11000 Belgrade (Serbia); Manojlović, Dragan, E-mail: manojlo@chem.bg.ac.rs [Faculty of Chemistry, University of Belgrade, P.O. Box 51, 11058 Belgrade 118 (Serbia)

    2015-02-01

    Pharmaceutical compounds have been detected frequently in surface and ground water. Advanced Oxidation Processes (AOPs) were reported as very efficient for removal of various organic compounds. Nevertheless, due to incomplete degradation, toxic intermediates can induce more severe effects than the parent compound. Therefore, toxicity studies are necessary for the evaluation of possible uses of AOPs. In this study the effectiveness and capacity for environmental application of three different AOPs were estimated. They were applied and evaluated for removal of ibuprofen from water solutions. Therefore, two treatments were performed in a non-thermal plasma reactor with dielectric barrier discharge with and without a homogenous catalyst (Fe{sup 2+}). The third treatment was the Fenton reaction. The degradation rate of ibuprofen was measured by HPLC-DAD and the main degradation products were identified using LC–MS TOF. Twelve degradation products were identified, and there were differences according to the various treatments applied. Toxicity effects were determined with two bioassays: Vibrio fischeri and Artemia salina. The efficiency of AOPs was demonstrated for all treatments, where after 15 min degradation percentage was over 80% accompanied by opening of the aromatic ring. In the treatment with homogenous catalyst degradation reached 99%. V. fischeri toxicity test has shown greater sensitivity to ibuprofen solution after the Fenton treatment in comparison to A. salina. - Highlights: • Twelve ibuprofen degradation products were identified in total. • The degradation percentage differed between treatments (DBD/Fe{sup 2+} was 99%). • In DBD/Fe{sup 2+} only aliphatic degradation products were identified. • V. fischeri was sensitive to ibuprofen solution after the Fenton treatment. • A. salina showed no toxic effect when exposed to all post treatment solutions.

  13. Modelling thermal degradation of zearalenone in maize bread during baking.

    Science.gov (United States)

    Numanoglu, E; Yener, S; Gökmen, V; Uygun, U; Koksel, H

    2013-01-01

    The thermal degradation of zearalenone (ZEA) was investigated using a crust-like model, representing maize bread, which was prepared with naturally contaminated maize flour. Model samples were heated under isothermal conditions at the temperature range of 100-250°C. No reduction was observed at 100°C. Thermal degradation rate constants (k) were calculated as 0.0017, 0.0143 and 0.0216 min(-1) for 150, 200 and 250°C, respectively. Maize bread baked at 250°C for 70 min was used to test the capability of model kinetic data for the prediction of ZEA reduction. The time-temperature history in the crust and crumb parts was recorded separately. Partial degradation of ZEA at each time interval was calculated by means of the corresponding k-values obtained by using the Arrhenius equation, and the total reduction occurring at the end of the entire baking process was predicted. The reduction in the crumb and crust of bread was also experimentally determined and found to be consistent with the predicted values. It was concluded that the kinetic constants determined by means of the crust-like model could be used to predict the ZEA reduction occurring during baking of maize bread.

  14. Theoretical studies on thermal degradation reaction mechanism of model compound of bisphenol A polycarbonate.

    Science.gov (United States)

    Huang, Jinbao; He, Chao; Li, Xinsheng; Pan, Guiying; Tong, Hong

    2018-01-01

    Density functional theory methods (DFT) M062X have been used to investigate the thermal degradation processes of model compound of bisphenol A polycarbonate (MPC) and to identify the optimal reaction paths in the thermal decomposition of bisphenol A polycarbonate (PC). The bond dissociation energies of main bonds in MPC were calculated, and it is found that the weakest bond in MPC is the single bond between the methylic carbon and carbon atom and the second weakest bond in MPC is the single bond between oxygen atom and the carbonyl carbon. On the basis of computational results of kinetic parameters, a mechanism is proposed where the hydrolysis (or alcoholysis) reaction is the main degradation pathways for the formation of the evolved products, and the homolytic cleavage and rearrangement reactions are the competitive reaction pathways in the thermal degradation of PC. The proposed mechanism is consistent with experimental observations of CO2, bisphenol A and 1,1-bis(4-hydroxyphenyl)-ethane as the main degradation products, together with a small amount of CO, alkyl phenol and diphenyl carbonate. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Interfacial thermal degradation in inverted organic solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Greenbank, William; Hirsch, Lionel; Wantz, Guillaume; Chambon, Sylvain, E-mail: sylvain.chambon@ims-bordeaux.fr [University of Bordeaux, CNRS, Bordeaux INP, IMS, UMR 5218, F-33405 Talence (France)

    2015-12-28

    The efficiency of organic photovoltaic (OPV) solar cells is constantly improving; however, the lifetime of the devices still requires significant improvement if the potential of OPV is to be realised. In this study, several series of inverted OPV were fabricated and thermally aged in the dark in an inert atmosphere. It was demonstrated that all of the devices undergo short circuit current-driven degradation, which is assigned to morphology changes in the active layer. In addition, a previously unreported, open circuit voltage-driven degradation mechanism was observed that is highly material specific and interfacial in origin. This mechanism was specifically observed in devices containing MoO{sub 3} and silver as hole transporting layers and electrode materials, respectively. Devices with this combination were among the worst performing devices with respect to thermal ageing. The physical origins of this mechanism were explored by Rutherford backscattering spectrometry and atomic force microscopy and an increase in roughness with thermal ageing was observed that may be partially responsible for the ageing mechanism.

  16. Thermolysis kinetics and thermal degradation compounds of alliin.

    Science.gov (United States)

    Chen, Zixing; Xu, MingJiao; Wang, Chao; Zhou, Hua; Fan, Lokyee; Huang, Xuesong

    2017-05-15

    To investigate thermolysis kinetics and identify degradation compounds, alliin solutions were heated at 60, 80, and 89°C. The degradation compounds of alliin were identified by high performance liquid chromatography-mass spectrometry (HPLC-MS), tandem mass spectrometry (MS/MS) and ultra-pressure liquid chromatography-high resolution mass spectrometry (UPLC-HRMS). The results showed that the thermal degradation kinetic of alliin could be described by a first-order reaction and k=4.38×1017exp (-142494/RT), where k is the reaction rate constant, min-1; R is gas constant; T is the absolute temperature, K. Degraded compounds, including S-allyl-l-cysteine and ethers, such as allyl alanine disulfide, allyl alanine trisulfide, allyl alanine tetrasulfide, dialanine disulfide (cysteine), dialanine trisulfide and dialanine tetrasulfide, were identified by HPLC-MS, MS/MS and UPLC-HRMS. Allyl alanine tetrasulfide was identified for the first time in alliin. The results show that alliin is unstable and significant numbers of organosulfur compounds are generated under high temperature treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Paracetamol degradation in aqueous solution by non-thermal plasma

    Science.gov (United States)

    Baloul, Yasmine; Aubry, Olivier; Rabat, Hervé; Colas, Cyril; Maunit, Benoît; Hong, Dunpin

    2017-08-01

    This study deals with paracetamol degradation in water using a non-thermal plasma (NTP) created by a dielectric barrier discharge (DBD). The effects of the NTP operating conditions on the degradation were studied, showing that the treatment efficiency of the process was highly dependent on the electrical parameters and working gas composition in the reactor containing the aqueous solution. A conversion rate higher than 99% was reached with an energy yield of 12 g/kWh. High resolution mass spectrometry (HRMS) measurements showed that the main species produced in water during the process were nitrogen compounds, carboxylic acids and aromatic compounds. Contribution to the topical issue "The 15th International Symposium on High Pressure Low Temperature Plasma Chemistry (HAKONE XV)", edited by Nicolas Gherardi and Tomáš Hoder

  18. Thermal properties of degraded lowland peat-moorsh soils

    Science.gov (United States)

    Gnatowski, Tomasz

    2016-04-01

    Soil thermal properties, i.e.: specific heat capacity (c), thermal conductivity (K), volumetric heat capacity (C) govern the thermal environment and heat transport through the soil. Hence the precise knowledge and accurate predictions of these properties for peaty soils with high amount of organic matter are especially important for the proper forecasting of soil temperature and thus it may lead to a better assessment of the greenhouse gas emissions created by microbiological activity of the peatlands. The objective of the study was to develop the predictive models of the selected thermal parameters of peat-moorsh soils in terms of their potential applicability for forecasting changes of soil temperature in degraded ecosystems of the Middle Biebrza River Valley area. Evaluation of the soil thermal properties was conducted for the parameters: specific heat capacity (c), volumetric heat capacities of the dry and saturated soil (Cdry, Csat) and thermal conductivities of the dry and saturated soil (Kdry, Ksat). The thermal parameters were measured using the dual-needle probe (KD2-Pro) on soil samples collected from seven peaty soils, representing total 24 horizons. The surface layers were characterized by different degrees of advancement of soil degradation dependent on intensiveness of the cultivation practises (peaty and humic moorsh). The underlying soil layers contain peat deposits of different botanical composition (peat-moss, sedge-reed, reed and alder) and varying degrees of decomposition of the organic matter, from H1 to H7 (von Post scale). Based on the research results it has been shown that the specific heat capacity of the soils differs depending on the type of soil (type of moorsh and type of peat). The range of changes varied from 1276 J.kg-1.K-1 in the humic moorsh soil to 1944 J.kg-1.K-1 in the low decomposed sedge-moss peat. It has also been stated that in degraded peat soils with the increasing of the ash content in the soil the value of specific heat

  19. Productivity of Degraded Ultisol in South-Eastern Nigeria Using ...

    African Journals Online (AJOL)

    This shows that DT could be used in predicting the productive potential of degraded land on which management strategies for rehabilitating such degraded land can be used. Keywords: Degradation, Soil Productivity, Predictive Model, Soil Properties, Soil Erosion-Productivity Relationship, Sustainable Agriculture, ...

  20. Properties and degradability of hydrothermal carbonization products.

    Science.gov (United States)

    Eibisch, Nina; Helfrich, Mirjam; Don, Axel; Mikutta, Robert; Kruse, Andrea; Ellerbrock, Ruth; Flessa, Heinz

    2013-09-01

    Biomass carbonized via hydrothermal carbonization (HTC) yields a liquid and a carbon (C)-rich solid called hydrochar. In soil, hydrochars may act as fertilizers and promote C sequestration. We assumed that the chemical composition of the raw material (woodchips, straw, grass cuttings, or digestate) determines the properties of the liquid and solid HTC products, including their degradability. Additionally, we investigated whether easily mineralizable organic components adsorbed on the hydrochar surface influence the degradability of the hydrochars and could be removed by repetitive washing. Carbon mineralization was measured as CO production over 30 d in aerobic incubation experiments with loamy sand. Chemical analysis revealed that most nutrients were preferably enriched in the liquid phase. The C mineralization of hydrochars from woodchips (2% of total C added), straw (3%), grass (6%), and digestate (14%) were dependent on the raw material carbonized and were significantly lower (by 60-92%; digestate-hydrochar (up to 40%) but had no effect on mineralization rates of the other three hydrochars. Variations in C mineralization between different hydrochars could be explained by multiple factors, including differences in the O/C-H/C ratios, C/N ratios, lignin content, amount of oxygen-containing functional groups, and pH. In contrast to the solids, the liquid products were highly degradable, with 61 to 89% of their dissolved organic C being mineralized within 30 d. The liquids may be treated aerobically (e.g., for nutrient recovery). Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  1. Progress in Characterizing Thermal Degradation of Ethylene-Propylene Rubber

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, Leonard S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Qian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Childers, Matthew I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Correa, Miguel [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Shin, Yongsoon [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zwoster, Andy [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-08-26

    Ethylene-propylene rubber (EPR) is one of the two most common nuclear cable insulation materials. A large fraction of EPR-insulated cables in use in the nuclear industry were manufactured by The Okonite Company. Okoguard® is the name of the medium voltage thermoset EPR manufactured by The Okonite Company. Okoguard® has been produced with silane-treated clay filler and the characteristic pink color since the 1970’s. EPR is complex material that undergoes simultaneous reactions during thermal aging including oxidative and thermal cleavage and oxidative and thermal crosslinking. This reaction complexity makes precise EPR service life prediction from accelerated aging using approaches designed for single discreet reactions such as the Arrhenius approach problematic. Performance data and activation energies for EPR aged at conditions closer to service conditions will improve EPR lifetime prediction. In this report pink Okoguard® EPR insulation material has been thermally aged at elevated temperatures. A variety of characterization techniques have been employed to track material changes with aging. It was noted that EPR aged significant departure in aging behavior seemed to occur at accelerated aging temperatures between 140°C and 150°C at around 20 days of exposure. This may be due to alternative degradation mechanisms being accessed at this higher temperature and reinforces the need to perform accelerated aging for Okoguard® EPR service life prediction at temperatures below 150°C.

  2. Thermal degradation kinetics and antimicrobial studies of terpolymer resins

    Directory of Open Access Journals (Sweden)

    Abdul R. Burkanudeen

    2016-09-01

    Full Text Available The terpolymer (ASF was synthesized by condensation of anthranilic acid and salicylic acid with formaldehyde in the presence of glacial acetic acid as a catalyst at 140 ± 2 °C for 6 h with varying proportions of reactants. The terpolymer ASF-I was characterized by elemental analysis, FTIR, 1H NMR and 13C NMR spectroscopy. The thermal decomposition behavior of ASF-I, II and III terpolymers was studied using thermogravimetric analysis (TGA in a static nitrogen atmosphere at a heating rate of 20 °C/min. Freeman–Carroll, Sharp–Wentworth and Phadnis–Deshpande methods were used to calculate the thermal activation energy (Ea the order of reaction (n, entropy change (ΔS, free energy change (ΔF, apparent entropy (S∗ and frequency factor (Z. Phadnis–Deshpande method was used to propose the thermal degradation model for the decomposition pattern of ASF-I terpolymer resin. The order of the decomposition reaction was found to be 0.901. The thermal activation energy determined with the help of these methods was in good agreement with each other. The ASF-I, II and III resins were tested for their inhibitory action against pathogenic bacteria and fungi. The resins show potent inhibitory action against bacteria, such as Escherichia coli, Klebsiella, Staphylococcus aureus and Pseudomonas aeruginosa and fungi viz. Aspergillus flavus, Aspergillus niger, Penicillium sp., Candida albicans, Cryptococcus neoformans and Mucor sp.

  3. Bio-based barium alginate film: Preparation, flame retardancy and thermal degradation behavior.

    Science.gov (United States)

    Liu, Yun; Zhang, Chuan-Jie; Zhao, Jin-Chao; Guo, Yi; Zhu, Ping; Wang, De-Yi

    2016-03-30

    A bio-based barium alginate film was prepared via a facile ionic exchange and casting approach. Its flammability, thermal degradation and pyrolysis behaviors, thermal degradation mechanism were studied systemically by limiting oxygen index (LOI), vertical burning (UL-94), microscale combustion calorimetry (MCC), thermogravimetric analysis (TGA) coupled with Fourier transform infrared analysis (FTIR) and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). It showed that barium alginate film had much higher LOI value (52.0%) than that of sodium alginate film (24.5%). Moreover, barium alginate film passed the UL-94 V-0 rating, while the sodium alginate film showed no classification. Importantly, peak of heat release rate (PHRR) of barium alginate film in MCC test was much lower than that of sodium alginate film, suggested that introduction of barium ion into alginate film significantly decreased release of combustible gases. TG-FTIR and Py-GC-MS results indicated that barium alginate produced much less flammable products than that of sodium alginate in whole thermal degradation procedure. Finally, a possible degradation mechanism of barium alginate had been proposed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Degradation of thermally-cured silicone encapsulant under terrestrial UV

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Can; Miller, David C.; Tappan, Ian A.; Dauskardt, Reinhold H.

    2016-12-01

    Concentrator photovoltaic (CPV) modules operate in extreme conditions, including enhanced solar flux, elevated operating temperature, and frequent thermal cycling. Coupled with active environmental species such as oxygen and moisture, the operating conditions pose a unique materials challenge for guaranteeing operational lifetimes of greater than 25 years. Specifically, the encapsulants used in the optical elements are susceptible to environmental degradation during operation. For example, the interfaces must remain in contact to prevent optical attenuation and thermal runaway. We developed fracture mechanics based metrologies to characterize the adhesion of the silicone encapsulant and its adjacent surfaces, as well as the cohesion of the encapsulant. Further, we studied the effects of weathering on adhesion using an outdoor concentrator operating in excess of 1100 times the AM1.5 direct irradiance and in indoor environmental chambers with broadband ultraviolet (UV) irradiation combined with controlled temperature and humidity. We observed a sharp initial increase in adhesion energy followed by a gradual decrease in adhesion as a result of both outdoor concentrator exposure and indoor UV weathering. We characterized changes in mechanical properties and chemical structures using XPS, FTIR, and DMA to understand the fundamental connection between mechanical strength and the degradation of the silicone encapsulant. We developed physics based models to explain the change in adhesion and to predict operational lifetimes of the materials and their interfaces.

  5. A theoretical and experimental study of the thermal degradation of biomass

    Energy Technology Data Exchange (ETDEWEB)

    Groenli, Morten G.

    1996-12-31

    This thesis relates to the thermal degradation of biomass covering a theoretical and experimental study in two parts. In the first part, there is presented an experimental and modeling work on the pyrolysis of biomass under regimes controlled by chemical kinetics, and the second part presents an experimental and modeling work on the pyrolysis of biomass under regimes controlled by heat and mass transfer. Five different celluloses, and hemicellulose and lignin isolated from birch and spruce have been studied by thermogravimetry. The thermo grams of wood species revealed different weight loss characteristics which can be attributed to their different chemical composition. The kinetic analysis gave activation energies between 210 and 280 kJ/mole for all the celluloses, and a model of independent parallel reactions was successfully used to describe the thermal degradation. In the second part of the thesis there is presented experimental and modeling work on the pyrolysis of biomass under regimes controlled by heat and mass transfer. The effect of heating conditions on the product yields distribution and reacted fraction was investigated. The experiments show that heat flux alters the pyrolysis products as well as the intra particle temperatures to the greatest extent. A comprehensive mathematical model which can simulate drying and pyrolysis of moist wood is presented. The simulation of thermal degradation and heat transport processes agreed well with experimental results. 198 refs., 139 figs., 68 abs.

  6. Thermal Degradation Characteristics of Oil Filled Cable Joint with Extremely Degraded tan δ Oil

    Science.gov (United States)

    Ide, Kenichi; Nakade, Masahiko; Takahashi, Tohru; Nakajima, Takenori

    Much of oil filled (OF) cable has been used for a long time for 66∼500kV extra high voltage cable. Sometimes we can see extremely degraded tanδ oil (several tens % of tanδ, for example) in joint box etc. The calculation results of tanδ on a simple combination model of paper/oil show that, tanδ of oil impregnated paper with such a high tanδ oil is extremely high and it must result in a thermal breakdown. However such an event has not taken place up to the present in actually operated transmission line. This fact suggests that some suppression mechanism of tanδ has acted in the degraded tanδ oil impregnated paper insulation. Therefore we investigated the tanδ characteristics of oil impregnated paper with extremely high tanδ oil in detail. In addition, based on the investigation results, we developed a simulation method of heat generation by dielectric loss in OF cable joint (which has degraded tanδ oil).

  7. Thermal Degradation Studies of A Polyurethane Propellant Binder

    Energy Technology Data Exchange (ETDEWEB)

    Assink, R.A.; Celina, M.; Gillen, K.T.; Graham, A.C.; Minier, L.M.

    1999-06-12

    The thermal oxidative aging of a crosslinked hydroxy-terminated polybutadiene (HTPB)/isophorone diisocyanate (IPDI) based polyurethane rubber, used as a polymeric binder in solid propellant grain, was investigated at temperatures from 25 C to 125 C. The changes in tensile elongation, polymer network properties and chain dynamics, mechanical hardening and density were determined with a range of techniques including modulus profiling, solvent swelling, NMR relaxation and O{sub 2} permeability measurements. We critically evaluated the Arrhenius methodology that is commonly used with a linear extrapolation of high temperature aging data using extensive data superposition and highly sensitive oxygen consumption experiments. The effects of other constituents in the propellant formulation on aging were also investigated. We conclude that crosslinking is the dominant process at higher temperatures and that the degradation involves only limited hardening in the bulk of the material. Significant curvature in the Arrhenius diagram of the oxidation rates was observed. This is similar to results for other rubber materials.

  8. Studies on Thermal Degradation Behavior of Siliceous Agriculture Waste (Rice Husk, Wheat Husk and Bagasse)

    National Research Council Canada - National Science Library

    Syed H. Javed; Umair Aslam; Mohsin Kazmi; Masooma Rustam; Sheema Riaz; Zahid Munir

    2015-01-01

    Various siliceous agriculture waste (SAW) such as rice husk, wheat husk and bagasse have been investigated to study their thermal degradation behavior using Thermogravimetric Analyzer (TGA) technique...

  9. The thermal properties of a carbon nanotube-enriched epoxy: Thermal conductivity, curing, and degradation kinetics

    KAUST Repository

    Ventura, Isaac Aguilar

    2013-05-31

    Multiwalled carbon nanotube-enriched epoxy polymers were prepared by solvent evaporation based on a commercially available epoxy system and functionalized multiwalled carbon nanotubes (COOH-MWCNTs). Three weight ratio configurations (0.05, 0.5, and 1.0 wt %) of COOH-MWCNTs were considered and compared with neat epoxy and ethanol-treated epoxy to investigate the effects of nano enrichment and processing. Here, the thermal properties of the epoxy polymers, including curing kinetics, thermal conductivity, and degradation kinetics were studied. Introducing the MWCNTs increased the curing activation energy as revealed by differential scanning calorimetry. The final thermal conductivity of the 0.5 and 1.0 wt % MWCNT-enriched epoxy samples measured by laser flash technique increased by up to 15% compared with the neat material. The activation energy of the degradation process, investigated by thermogravimetric analysis, was found to increase with increasing CNT content, suggesting that the addition of MWCNTs improved the thermal stability of the epoxy polymers. © 2013 Wiley Periodicals, Inc.

  10. Degradation mechanism and thermal stability of urea nitrate below the melting point

    Energy Technology Data Exchange (ETDEWEB)

    Desilets, Sylvain, E-mail: sylvain.desilets@drdc-rddc.gc.ca [Defence R and D Canada, Valcartier, 2459 Pie-XI Blvd North, Val-Belair, Quebec, Canada G3J 1X5 (Canada); Brousseau, Patrick; Chamberland, Daniel [Defence R and D Canada, Valcartier, 2459 Pie-XI Blvd North, Val-Belair, Quebec, Canada G3J 1X5 (Canada); Singh, Shanti; Feng, Hongtu; Turcotte, Richard [Canadian Explosives Research Laboratory, 1 Haanel Dr. Ottawa, Quebec, Canada K1A 1M1 (Canada); Anderson, John [Defence R and D Canada, Suffield, Box 4000, stn Main, Medicine Hat, Alberta, Canada T1A 8K6 (Canada)

    2011-07-10

    Highlights: {yields} Decomposition mechanism of urea nitrate. {yields} Spectral characterization of the decomposition mechanism. {yields} Thermal stability of urea nitrate at 50, 70 and 100 {sup o}C. {yields} Chemical balance of decomposed products released. - Abstract: Aging and degradation of urea nitrate below the melting point, at 100 {sup o}C, was studied by using thermal analysis and spectroscopic methods including IR, Raman, {sup 1}H and {sup 13}C NMR techniques. It was found that urea nitrate was completely degraded after 72 h at 100 {sup o}C into a mixture of solids (69%) and released gaseous species (31%). The degradation mechanism below the melting point was clearly identified. The remaining solid mixture was composed of ammonium nitrate, urea and biuret while unreacted residual nitric and isocyanic acids as well as traces of ammonia were released as gaseous species at 100 {sup o}C. The thermal stability of urea nitrate, under extreme storage conditions (50 {sup o}C), was also examined by isothermal nano-calorimetry.

  11. Thermal degradation features of peppermint oil in a binary system with Β- cyclodextrin

    Directory of Open Access Journals (Sweden)

    I. A. Omelchenko

    2016-04-01

    Full Text Available Aim. One of the most promising ways of changing physical and chemical properties of the active pharmaceutical ingredient is an encapsulation on a molecular level with the use of cyclodextrins. This makes it possible to create products with the desired activity and controlled distribution in the body. Methods and results. We have studied the thermal decomposition of peppermint oil in binary systems with β-cyclodextrin. It has been found that the thermal degradation of mechanical mixture and inclusion complex of the «host-guest» with the composition of 1:1 passes through different mechanisms. Conclusions. It is shown that the given data of thermal stability are useful for the identification of an inclusion complex «β-CD – peppermint oil» and assessing its complexation, and for the development of technology of medicinal forms of supramolecular complex of β-cyclodextrin and peppermint oil

  12. Control of Several Emissions during Olive Pomace Thermal Degradation

    Directory of Open Access Journals (Sweden)

    Teresa Miranda

    2014-10-01

    Full Text Available Biomass plays an important role as an energy source, being an interesting alternative to fossil fuels due to its environment-friendly and sustainable characteristics. However, due to the exposure of customers to emissions during biomass heating, evolved pollutants should be taken into account and controlled. Changing raw materials or mixing them with another less pollutant biomass could be a suitable step to reduce pollution. This work studied the thermal behaviour of olive pomace, pyrenean oak and their blends under combustion using thermogravimetric analysis. It was possible to monitor the emissions released during the process by coupling mass spectrometry analysis. The experiments were carried out under non-isothermal conditions at the temperature range 25–750 °C and a heating rate of 20 °C·min−1. The following species were analysed: aromatic compounds (benzene and toluene, sulphur emissions (sulphur dioxide, 1,4-dioxin, hydrochloric acid, carbon dioxide and nitrogen oxides. The results indicated that pollutants were mainly evolved in two different stages, which are related to the thermal degradation steps. Thus, depending on the pollutant and raw material composition, different emission profiles were observed. Furthermore, intensity of the emission profiles was related, in some cases, to the composition of the precursor.

  13. Kinetic and thermodynamic investigation of mancozeb degradation in tomato homogenate during thermal processing.

    Science.gov (United States)

    Certel, Muharrem; Cengiz, Mehmet F; Akçay, Mehmet

    2012-02-01

    The kinetic and thermodynamic parameters of mancozeb degradation in tomato homogenates under the conditions prevailing in the manufacture of tomato products (at 60-100 °C for 0-60 min) were investigated. A gas chromatography-mass spectrometry method was used to analyse residual mancozeb in tomato homogenate. Ethylenethiourea (ETU), the main toxic degradation product of mancozeb, was measured by high-performance liquid chromatography (HPLC)-with photodiode array detector (PDA). The degradation of mancozeb and the formation of ETU in tomato homogenates were adequately described as first-order kinetics. Dependence of the rate constant followed the Arrhenius relationship. Apparent activation energies, temperature coefficients, half time and time to reduce to 90% of the initial value of mancozeb were calculated as kinetic parameters. The thermodynamic parameters of mancozeb were also described as Δg(d) = - 2.440 and 7.074 kJ mol⁻¹; Δh(d) = - 32.555 and - 42.767 kJ mol⁻¹; Δs(d) = - 0.090 and - 0.150 kJ mol⁻¹ K⁻¹; K(e) = 0.414 and 9.797 L g⁻¹ for 333 and 373 K respectively. Current findings may shed light on the reduction of mancozeb residue and its toxic degradation product during thermal processing of tomatoes and may also be valuable in awareness and prevention of potential risks from dietary exposure. Copyright © 2011 Society of Chemical Industry.

  14. Thermally induced degradation of sulfur-containing aliphatic glucosinolates in broccoli sprouts (Brassica oleracea var. italica) and model systems.

    Science.gov (United States)

    Hanschen, Franziska S; Platz, Stefanie; Mewis, Inga; Schreiner, Monika; Rohn, Sascha; Kroh, Lothar W

    2012-03-07

    Processing reduces the glucosinolate (GSL) content of plant food, among other aspects due to thermally induced degradation. Since there is little information about the thermal stability of GSL and formation of corresponding breakdown products, the thermally induced degradation of sulfur-containing aliphatic GSL was studied in broccoli sprouts and with isolated GSL in dry medium at different temperatures as well as in aqueous medium at different pH values. Desulfo-GSL have been analyzed with HPLC-DAD, while breakdown products were estimated using GC-FID. Whereas in the broccoli sprouts structural differences of the GSL with regard to thermal stability exist, the various isolated sulfur-containing aliphatic GSL degraded nearly equally and were in general more stable. In broccoli sprouts, methylsulfanylalkyl GSL were more susceptible to degradation at high temperatures, whereas methylsulfinylalkyl GSL were revealed to be more affected in aqueous medium under alkaline conditions. Besides small amounts of isothiocyanates, the main thermally induced breakdown products of sulfur-containing aliphatic GSL were nitriles. Although they were most rapidly formed at comparatively high temperatures under dry heat conditions, their highest concentrations were found after cooking in acidic medium, conditions being typical for domestic processing.

  15. Degradation products of rubusoside under acidic conditions.

    Science.gov (United States)

    Prakash, Indra; Bunders, Cynthia; Devkota, Krishna P; Charan, Romila D; Hartz, Rachael M; Sears, Tracy L; Snyder, Tara M; Ramirez, Catherine

    2015-04-01

    A natural sweetener, Rubusoside (1), subjected to extreme pH and temperature conditions, resulted in the isolation and structural elucidation of one novel rubusoside degradant (7), together with seven known degradants (2-6 and 8-9). ID and 2D NMR spectroscopy (1H, 13C, COSY, HSQC-DEPT, HMBC, and NOESY) and mass spectral data were used to fully characterize the degradant 7.

  16. Ultrasonic and Thermal Pretreatments on Anaerobic Digestion of Petrochemical Sludge: Dewaterability and Degradation of PAHs

    Science.gov (United States)

    Zhou, Jun; Xu, Weizhong; Wong, Jonathan W. C.; Yong, Xiaoyu; Yan, Binghua; Zhang, Xueying; Jia, Honghua

    2015-01-01

    Effects of different pretreatment methods on sludge dewaterability and polycyclic aromatic hydrocarbons (PAHs) degradation during petrochemical sludge anaerobic digestion were studied. Results showed that the total biogas production volume in the thermal pretreatment system was 4 and 5 times higher than that in the ultrasound pretreatment and in the control system, and the corresponding volatile solid removal efficiencies reached 28%, 15%, and 8%. Phenanthrene, paranaphthalene, fluoranthene, benzofluoranthene, and benzopyrene removal rates reached 43.3%, 55.5%, 30.6%, 42.9%, and 41.7%, respectively, in the thermal pretreatment system, which were much higher than those in the ultrasound pretreatment and in the control system. Moreover, capillary suction time (CST) of sludge increased after pretreatment, and then reduced after 20 days of anaerobic digestion, indicating that sludge dewaterability was greatly improved after anaerobic digestion. The decrease of protein and polysaccharide in the sludge could improve sludge dewaterability during petrochemical sludge anaerobic digestion. This study suggested that thermal pretreatment might be a promising enhancement method for petrochemical sludge solubilization, thus contributing to degradation of the PAHs, biogas production, and improvement of dewaterability during petrochemical sludge anaerobic digestion. PMID:26327510

  17. Degradation of Thermal Barrier Coatings from Deposits and Its Mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Nitin Padture

    2011-12-31

    Ceramic thermal barrier coatings (TBCs) used in gas-turbine engines afford higher operating temperatures, resulting in enhanced efficiencies and performance. However, in the case of syngas-fired engines, fly ash particulate impurities that may be present in syngas can melt on the hotter TBC surfaces and form glassy deposits. These deposits can penetrate the TBCs leading to their failure. In experiments using lignite fly ash to simulate these conditions we show that conventional TBCs of composition 93wt% ZrO{sub 2} + 7wt% Y{sub 2}O{sub 3} (7YSZ) fabricated using the air plasma spray (APS) process are completely destroyed by the molten fly ash. The molten fly ash is found to penetrate the full thickness of the TBC. The mechanisms by which this occurs appear to be similar to those observed in degradation of 7YSZ TBCs by molten calcium-magnesium-aluminosilicate (CMAS) sand and by molten volcanic ash in aircraft engines. In contrast, APS TBCs of Gd{sub 2Zr{sub 2}O{sub 7} composition are highly resistant to attack by molten lignite fly ash under identical conditions, where the molten ash penetrates ~25% of TBC thickness. This damage mitigation appears to be due to the formation of an impervious, stable crystalline layer at the fly ash/Gd{sub 2}Zr{sub 2}O{sub 7} TBC interface arresting the penetrating moltenfly- ash front. Additionally, these TBCs were tested using a rig with thermal gradient and simultaneous accumulation of ash. Modeling using an established mechanics model has been performed to illustrate the modes of delamination, as well as further opportunities to optimize coating microstructure. Transfer of the technology was developed in this program to all interested parties.

  18. NDE of degradation of thermal barrier coating by means of impedance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Kazuhiro; Minkov, Dorian; Shoji, Tetsuo [Tohoku Univ., Research Inst. for Fracture Technology, Sendai (Japan); Sato, Minoru; Hashimoto, Hideo [Tohoku Electric Power Co. Inc., Sendai (Japan)

    1999-04-01

    Nondestructive evaluation of thermal barrier coating (TBC) degradation during service operation has received a wide attention for service life prediction of advanced gas turbines. In this work, TBC on nickel base superalloy degraded at various degrees by thermal aging is investigated. Particularly, TBC and Metal-Chromium-Aluminum-Yttrium alloy (MCrAlY) (M indicates iron (Fe), cobalt (Co), nickel (Ni) or these combinations) bond coating interface where a detrimental reaction takes place and forms various reaction products during thermal aging, is studied in detail. Formation kinetics and physical properties of the reaction layer are evaluated by means of Impedance Spectroscopy (IS). Specimens aged at higher temperature and a longer aging time shows larger impedance. The impedance behavior of TBC and bond coating is found to be markedly changed by the formation of the reaction layer. Physical properties and thickness of the reaction layer are evaluated using the change of the impedance. A mechanistic interpretation of the cause of change in the physical properties and IS behavior are described. (Author)

  19. Thermal Degradation Behaviour of Ni(II Complex of 3,4-Methylenedioxaphenylaminoglyoxime

    Directory of Open Access Journals (Sweden)

    Emin Karapınar

    2013-01-01

    Full Text Available Thermal degradation behaviour of the Ni(II complex of 3,4-methylenedioxaphenylaminoglyoxime was investigated by TG, DTA, and DTG at a heating rate of 10°C min−1 under dinitrogen. The acquired experimental data shows that the complex is thermally stable up to 541 K. The pyrolytic decomposition process occurs by melting metal complex and metal oxide remains as final product. The energies of the reactions involved and the mechanism of decomposition at each stage have been examined. The values of kinetic parameters such as activation energy (E, preexponential factor (A and thermodynamic parameters such as enthalpy (ΔH, entropy (ΔS, and Gibbs free energy (ΔG are also evaluated.

  20. Development of method for identification of compounds emitted during thermal degradation of binders used in foundry

    Directory of Open Access Journals (Sweden)

    A. Bobrowski

    2011-07-01

    Full Text Available The aim of the research was to develop a method for identification of compounds emitted during thermal degradation of binders used in foundry. Research were performed with the use of Certified Reference Materials mixtures of semi-volatiles compounds with furfuryl alcohol and aldehyde. Furfuryl-urea resin samples were also used. Station for thermal degradation of materials used in foundry was designed and made. Thermal degradation process conditions and gas chromatograph coupled with high resolution mass spectrometry operating conditions were established. Organic compounds emitted during degradation were identified. The paper briefly represents the range of study and the results obtained for furfuryl-urea resin thermal degradation. Significant information about volatile and semi-volatile organic compounds emitted in different temperatures is also discussed.

  1. Sinalbin degradation products in mild yellow mustard paste

    Directory of Open Access Journals (Sweden)

    Paunović Dragana

    2012-01-01

    Full Text Available Sinalbin degradation products in mild yellow mustard paste were investigated. The analyzed material consisted of a mild yellow mustard paste condiment and ground white mustard seeds which were originally used in the mustard paste production process. The samples were extracted in a Soxhlet extraction system and analyzed by gas chromatography - mass spectrometry (GC-MS technique. The only sinalbin degradation product in ground mustard seeds was 2-(4-hydroxyphenylacetonitrile. The most abundant sinalbin degradation product in yellow mustard paste was 4-(hydroxymethylphenol. Other compounds identified in this sample were: 4-methyl phenol, 4-ethyl phenol, 4-(2-hydroxyethylphenol and 2-(4-hydroxyphenyl ethanoic acid.

  2. Thermal oxidative degradation of wood modified with aminophenylborates

    Directory of Open Access Journals (Sweden)

    Klyachenkova Olga

    2016-01-01

    Full Text Available Comparative thermal analysis in the presence of oxygen was carried out for samples of native pine wood and wood samples modified with aminophenylborates. Significant decrease in the amount of heat released during thermal decomposition of the modified samples was established, which is due to the increase of carbonaceous residues on the surface. Reduction of heat release during decomposition of the modified samples may be explained by the lower yield of combustible volatile products as well as by thin film of boron oxide, formed on the surface of the modified wood, that partially reflects heat flow. Produced upon the modifier decomposition water vapor and inert nitrogen oxides dilute gaseous mixture near the wood surface and isolate it from oxygen. This enhances fire-resistance of wood modified with mono- and diethanolamine(N→Bphenylborates. Hydroxyl group at the sixth carbon atom of the glucopyranose ring of cellulose participates in reactions of cellulose modification, which prevents formation of flammable levoglucosan and, consequently, improves the fire-resistance of the modified wood.

  3. Productivity, chemical composition and ruminal degradability of ...

    African Journals Online (AJOL)

    ShoeskY

    2016-11-19

    Nov 19, 2016 ... Information on the relationship between the quality and degradability of Napier grass at various stages of maturity is limited and is ... experimental period were extracted from Agricultural Research Council – Institute for Soil, Climate and Water. (ARC-ISCW) station ...... Region of Colombia. II. Trace Minerals.

  4. Thermal degradation of organics for pyrolysis in space: Titan's atmospheric aerosol case study

    Science.gov (United States)

    He, Jing; Buch, Arnaud; Carrasco, Nathalie; Szopa, Cyril

    2015-03-01

    Pyrolysis coupled with mass spectry is among the instrumentation the most implemented in planetary exploration probes to analyze the chemical composition of extraterrestrial solid samples. It is used to analyze the volatile species which can be thermally extracted from the samples, including the organic fraction which is of primary interest for astrobiological purposes. However the thermal degradation of these organic materials, which can be very complex in nature or very different from organics commonly present on Earth, is badly known. This leads to a restriction in the optimization of space instrumentation, and in the interpretation of the measurements. In the present work we propose a complete overview of the thermal degradation processes studied on a model of complex organic material produced in an extraterrestrial environment, i.e. laboratory analogues of Titan's atmospheric aerosols. The thermal evolution of the studied analogues is monitored by following their mass loss, the emitted heating flux, and the evolution of their chemical composition through infrared spectroscopy and elemental analysis. The gaseous products released from the material are also analyzed by mass spectrometry, allowing to better constrain the mechanisms of chemical evolution of the samples. The complex organic material analyzed is found not to be fully decomposed when heated up to about 800 °C, with the evidence that nitrogen is still deeply incorporated in the remaining graphitic carbon nitride residue. The most appropriate pyrolysis temperature to chemically probe the studied material is found to be about 450 °C because at this temperature are detected the largest gaseous molecules which should be the most representative ones of the material pyrolyzed.

  5. Charge Transport and Photocurrent Generation Characteristics in Dye Solar Cells Containing Thermally Degraded N719 Dye Molecules

    DEFF Research Database (Denmark)

    Andersen, A. R.; Halme, J.; Lund, T.

    2011-01-01

    By deliberately introducing the thermally degraded form of the dye solar cell sensitizer N719 in dye-sensitized solar cells (DSCs) using synthetically prepared N719-TBP ([Ru(L-H)(2)(NCS)(4-tert-butylpyridine)](-+)N-(Bu)(4)), we have investigated the devastating influence of this ligand substitution...... product (N719-TBP) on the performance parameters of the cells. Two types of dyed solar cells, based on either N719 or N719-TBP, have been characterized employing standard current-voltage (I-V) performance test, UV-vis optical spectroscopy, incident photon to current efficiency (IPCE), and electrochemical...... in the substitution product. The observations made in this study of DSC cells dyed with the substitution product, representing a worst case scenario of cells with 100% degraded dye, are in agreement with the characteristics of N719-dyed solar cells degraded at 85 degrees C, where the effect of ligand substitution...

  6. Thermal Degradation Study of Decabromodiphenyl Ether. Translating Thermo-Analytical Results into Optimal Chromatographic Conditions

    Directory of Open Access Journals (Sweden)

    Dumitras Mihai

    2016-12-01

    Full Text Available This study aims to investigate the thermal degradation behavior of decabrominated diphenyl ether (BDE 209, a flame retardant (FR which accounts for more than 90% of the total polybrominated diphenyl ethers reported for indoor dust samples collected from Eastern Romania. Simultaneous TG/DTA was applied under various heating rate and atmospheres. The results of this study showed that BDE 209 undergoes thermal degradation in a single step, regardless of the heating rate or atmosphere, with an initial degradation temperature between 297 and 330 °C, depending on the heating rate, and a partial overlapping of melting and thermal degradation in the initial stages which might suggest that the common degradation noticed for the higher brominated FRs analysis might also occur during sample preparation or during injection of the extracts in the GC systems and not necessarily during column elution. The main findings of this research were aimed at designing proper GC analytical methods for the selected halogenated contaminants.

  7. Degradation of Histamine by Lactobacillus plantarum Isolated from Miso Products.

    Science.gov (United States)

    Kung, Hsien-Feng; Lee, Yi-Chen; Huang, Ya-Ling; Huang, Yu-Ru; Su, Yi-Cheng; Tsai, Yung-Hsiang

    2017-10-01

    Histamine is a toxic chemical and is the causative agent of food poisoning. This foodborne toxin may be degraded by the oxidative deamination activity of certain microorganisms. In this study, we isolated four histamine-degrading Lactobacillus plantarum bacteria from miso products. Among them, L. plantarum D-103 exhibited 100% degradation of histamine in de Man Rogosa Sharpe (MRS) broth containing 50 ppm of histamine after 24 h of incubation at 30°C. The optimal growth, histamine oxidase, and histamine-degrading activity of L. plantarum D-103 were observed in histamine MRS broth at pH 7.0, 3% NaCl, and 30°C. It also exhibited tolerance to broad ranges of pH (4 to 10) and salt concentrations (0 to 12%) in histamine MRS broth. Therefore, the histamine-degrading L. plantarum D-103 might be used as an additive culture to prevent histamine accumulation in miso products during fermentation.

  8. Determination of impurities and degradation products from veterinary medicinal products by HPLC method

    Directory of Open Access Journals (Sweden)

    Elena Gabriela Oltean

    2014-06-01

    Full Text Available The organic or inorganic impurities in the veterinary medicinal product can derive from starting materials, manufacturing process, incomplete purification, inappropriate storage. The acceptable levels of impurities in pharmaceuticals are estimated by comparison with standard solutions, according to the appropriate monographs. Forced degradation studies determine the stability of the method of dosage for the active compounds and for the entire finished product under excessive accelerated degradation conditions. They also provide information on degradation pathways and selectivity of analytical methods applied. The information provided by the degradation studies on the active compound and finished pharmaceutical product should demonstrate the specificity of the analytical method regarding impurities. Forced degradation studies should demonstrate that the impurities and degradation products generated do not interfere with the active compound. The current forced degradation methods consist of acid hydrolysis, basic hydrolysis, oxidation, exposure of the medicinal product to temperature and light. HPLC methods are an integral analytical instrument for the analysis of the medicinal product. The HPLC method should be able to separate, detect and quantify various specific degradation products that can appear after manufacture or storage of the medicinal product, as well as new elements appearing after synthesis. FDA and ICH guidelines recommend the enclosure of the results, including the chromatograms specific to the forced degradation-subjected medicinal product, in the documentation for marketing authorization. Using HPLC methods in forced degradation studies on medicinal products provides relevant information on the method of determination for the formulation of the medicinal product, synthesis product, packaging methods and storage.

  9. Effect of Boric Acid on Volatile Products of Thermooxidative Degradation of Epoxy Polymers

    Science.gov (United States)

    Nazarenko, O. B.; Bukhareva, P. B.; Melnikova, T. V.; Visakh, P. M.

    2016-01-01

    The polymeric materials are characterized by high flammability. The use of flame retardants in order to reduce the flammability of polymers can lead to the formation of toxic gaseous products under fire conditions. In this work we studied the effect of boric acid on the volatile products of thermooxidative degradation of epoxy polymers. The comparative investigations were carried out on the samples of the unfilled epoxy resin and epoxy resin filled with a boric acid at percentage 10 wt. %. The analysis of the volatile decomposition products and thermal stability of the samples under heating in an oxidizing medium was performed using a thermal mass-spectrometric analysis. It is found that the incorporation of boric acid into the polymer matrix increases the thermal stability of epoxy composites and leads to a reduction in the 2-2.7 times of toxic gaseous products

  10. Anthocyanins degradation during storage of Hibiscus sabdariffa extract and evolution of its degradation products.

    Science.gov (United States)

    Sinela, André; Rawat, Nadirah; Mertz, Christian; Achir, Nawel; Fulcrand, Hélène; Dornier, Manuel

    2017-01-01

    Degradation parameters of two main anthocyanins from roselle extract (Hibiscus sabdariffa L.) stored at different temperatures (4-37°C) over 60days were determined. Anthocyanins and some of their degradation products were monitored and quantified using HPLC-MS and DAD. Degradation of anthocyanins followed first-order kinetics and reaction rate constants (k values), which were obtained by non-linear regression, showed that the degradation rate of delphinidin 3-O-sambubioside was higher than that of cyanidin 3-O-sambubioside with k values of 9.2·10(-7)s(-1) and 8.4·10(-7)s(-1) at 37°C respectively. The temperature dependence of the rate of anthocyanin degradation was modeled by the Arrhenius equation. Degradation of delphinidin 3-O-sambubioside (Ea=90kJmol(-1)) tended to be significantly more sensitive to an increase in temperature than cyanidin 3-O-sambubioside (Ea=80kJmol(-1)). Degradation of these anthocyanins formed scission products (gallic and protocatechuic acids respectively) and was accompanied by an increase in polymeric color index. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Broccoli glucosinolate degradation is reduced performing thermal treatment in binary systems with other food ingredients

    NARCIS (Netherlands)

    Giambanelli, E.; Verkerk, R.; Fogliano, V.; Capuano, E.; Antuono, D' L.F.; Oliviero, T.

    2015-01-01

    Glucosinolate (GL) stability has been widely studied in different Brassica species. However, the matrix effect determined by the presence of other ingredients occurred in many broccoli-based traditional recipes may affect GL thermal degradation. In this study, the matrix effect on GL thermal

  12. Thermal and catalytic degradation of polyethylene wastes in the presence of silica gel, 5A molecular sieve and activated carbon.

    Science.gov (United States)

    González, Yovana Sander; Costa, Carlos; Márquez, M Carmen; Ramos, Pedro

    2011-03-15

    A comparative study of thermal and catalytic degradation of polyethylene wastes has been carried out with the aim of obtaining chemical compounds with potential use in the chemical industry and the energy production. Polyethylene wastes were obtained from polyethylene bags used in supermarkets. Catalysts utilized in the study were silica gel, 5A molecular sieve and activated carbon. The pyrolysis was performed in a batch reactor at 450, 500 and 700 °C during 2h for each catalyst. The ratio catalyst/PE was 10% w/w and the solid and gaseous products were analyzed by gas chromatography and mass spectrometry. The optimum operation temperature and the influence of the three catalysts are discussed with regards to the products formed. The best temperature for degradation with silica gel and activated carbon as catalysts was 450 °C and with 5A molecular sieve was 700 °C. Degradation products of PE (solid fraction and gas fraction) are depending on temperature and catalyst used. External surface and structure of catalysts were visualized by Scanning Electron Microscopy (SEM) and the contribution on product distribution is commented. All products from different degradations could be used as feed stocks in chemical industry or in energy production based on the value of heat of combustion for solid fraction (45000 J/g), similar to the heat of combustion of commercial fuels. Copyright © 2011 Elsevier B.V. All rights reserved.

  13. Cholesterol and stigmasterol within a sunflower oil matrix: Thermal degradation and oxysterols formation.

    Science.gov (United States)

    Barriuso, Blanca; Ansorena, Diana; Poyato, Candelaria; Astiasarán, Iciar

    2015-07-01

    The characteristics of the lipid matrix surrounding sterols exert a great influence in their thermal oxidation process. The objective of this work was to assess the oxidation susceptibility of equal amounts of cholesterol and stigmasterol within a sunflower oil lipid matrix (ratio 1:1:200) during heating (180°C, 0-180min). Remaining percentage of sterols was determined and seven sterol oxidation products (SOPs) were analysed for each type of sterol along the heating treatment. Evolution of the fatty acid profile and vitamin E content of the oil was also studied. Overall oxidation status of the model system was assessed by means of Peroxides Value (PV) and TBARS. PV remained constant from 30min onwards and TBARS continued increasing along the whole heating treatment. Degradation of both cholesterol and stigmasterol fitted a first order curve (R(2)=0.937 and 0.883, respectively), with very similar degradation constants (0.004min(-1) and 0.005min(-1), respectively). However, higher concentrations of oxidation products were found from cholesterol (79μg/mg) than from stigmasterol (53μg/mg) at the end of the heating treatment. Profile of individual oxidation products was similar for both sterols, except for the fact that no 25-hydroxystigmasterol was detected. 7α-Hydroxy and 7-keto-derivatives were the most abundant SOPs at the end of the treatment. PUFA and vitamin E suffered a significant degradation along the process, which was correlated to sterols oxidation. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Thermal degradation kinetics of polylactic acid/acid fabricated cellulose nanocrystal based bionanocomposites.

    Science.gov (United States)

    Monika; Dhar, Prodyut; Katiyar, Vimal

    2017-11-01

    Cellulose nanocrystals (CNC) are fabricated from filter paper (as cellulosic source) by acid hydrolysis using different acids such as sulphuric (H2SO4), phosphoric (H3PO4), hydrochloric (HCl) and nitric (HNO3) acid. The resulting acid derived CNC are melt mixed with Polylactic acid (PLA) using extruder at 180°C. Thermogravimetric (TGA) result shows that increase in 10% and 50% weight loss (T10, T50) temperature for PLA-CNC film fabricated with HNO3, H3PO4 and HCl derived CNC have improved thermal stability in comparison to H2SO4-CNC. Nonisothermal kinetic studies are carried out with modified-Coats-Redfern (C-R), Ozawa-Flynn-Wall (OFW) and Kissinger method to predict the kinetic and thermodynamic parameters. Subsequently prediction of these parameter leads to the proposal of thermal induced degradation mechanism of nanocomposites using Criado method. The distribution of Ea calculated from OFW model are (PLA-H3PO4-CNC: 125-139 kJmol(-1)), (PLA-HNO3-CNC: 126-145 kJmol(-1)), (PLA-H2SO4-CNC: 102-123 kJmol(-1)) and (PLA-HCl-CNC: 140-182 kJmol(-1)). This difference among Ea for the decomposition of PLA-CNC bionanocomposite is probably due to various acids used in this study. The Ea calculated by these two methods are found in consonance with that observed from Kissinger method. Further, hyphenated TG-Fourier transform infrared spectroscopy (FTIR) result shows that gaseous products such as CO2, CO, lactide, aldehydes and other compounds are given off during the thermal degradation of PLA-CNC nanocomposite. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Gas Evolution Qualitative Analyses From Modified Cellulose Mixtures During Thermal Degradation in Air and Argon

    Directory of Open Access Journals (Sweden)

    Zbigniew Zawieja

    2017-09-01

    Full Text Available This paper presents the application of mineral additives, such as expanded perlite, expanded vermiculite and microspheres in items used in founding. Mixed with paper pulp and aluminosilicate resin as a binder, these additives are the base of a mixture patented by the authors, which can be used in the production of pipe shapes and connectors with a circular cross-section in casting systems in the founding industry. These mixtures were subjected to TG thermal degradation during which a quantitative analysis of the emitted fumes was carried out. The analysis did not detect any other compounds other than those formed by the combustion of cellulose materials, which indicated that no chemical reaction took place between the applied additives and cellulose at high temperatures.

  16. Thermal degradation, antioxidant and antimicrobial activity of the synthesized allicin and allicin incorporated in gel

    Directory of Open Access Journals (Sweden)

    Ilić Dušica P.

    2010-01-01

    Full Text Available The main carriers of the pharmacological activity of garlic (Allium sativum L. are organic sulfur compounds, the most important among them being allicin, a sulfenic acid thioester, or allylthiosulfonate. In this paper, the identification of synthesized and purified allicin was determined by using various spectroscopic methods (UV/VIS, FTIR, NMR. A HPLC method was developed for the detection and determination of the allicin content. The thermal degradation of allicin by using FTIR method was monitored. The method for the production of allicin gel based on Carbopol 940 (poly(acrylic acid was elaborated. The antimicrobial activity of pure allicin and allicin incorporated into gel by using a disk diffusion method was determined. In order to determine the antioxidant activity of allicin DPPH test was done and it was proved that with low concentrations (1 mgcm-3 a high DPPH radicals scavenging capacity (90% was achieved.

  17. Production of Insecticide Degradates in Juices: Implications for Risk Assessment.

    Science.gov (United States)

    Radford, Samantha A; Panuwet, Parinya; Hunter, Ronald E; Barr, Dana Boyd; Ryan, P Barry

    2016-06-08

    This study was designed to observe the production of degradates of two organophosphorus insecticides and one pyrethroid insecticide in beverages. Purified water, white grape juice, apple juice, and red grape juice were fortified with 500 ng/g malathion, chlorpyrifos, and permethrin, and aliquots were extracted for malathion dicarboxylic acid (MDA), 3,5,6-trichloro-2-pyridinol (TCPy), and 3-phenoxybenzoic acid (3-PBA) several times over a 15 day period of being stored in the dark at 2.5 °C. Overall, first-order kinetics were observed for production of MDA, and statistically significant production of TCPy was also observed. Statistically significant production of 3-phenoxybenzoic acid was not observed. Results indicate that insecticides degrade in food and beverages, and this degradation may lead to preexisting insecticide metabolites in the beverages. Therefore, it is suggested that caution should be exercised when using urinary insecticide metabolites to assess exposure and risk.

  18. Degradation of fish gelatin using hot-compressed water and the properties of the degradation products

    Science.gov (United States)

    Ueno, Shigeaki; Ichinoi, Hirokazu; Zhao, Jiahui; Fujii, Tomoyuki

    2015-04-01

    The degradation of fish gelatin using hot-compressed water was investigated. The hot-compressed water treatment resulted in the degradation of fish gelatin into peptides, and the number of the peptides increased with increasing the temperature. The distribution of amino acids in the product mixture indicated that hot-compressed water treatment at 240°C resulted in a high level of amino acid degradation, and the highest concentrations of free amino acids was at 220°C. Lysinoalanine, which is toxic, was rarely generated by hot-compressed water treatment at higher temperature range. Additionally, the optimum temperature for the hot-compressed water treatment with respect to the angiotensin I-converting enzyme inhibitory was at 180°C. These analyses demonstrate that the degradation of fish gelatin with hot-compressed water could be used to generate functional materials.

  19. Restoring and Enhancing Productivity of Degraded Tephra-Derived Soils

    Science.gov (United States)

    Chuck Bulmer; Jim Archuleta; Mike Curran

    2007-01-01

    Soil restoration (sometimes termed enhancement) is an important strategy for sustaining the productivity of managed forest landscapes. Tephra-derived soils have unique physical and chemical characteristics that affect their response to disturbance and restoration. A variety of factors reduce forest productivity on degraded soils. Site-specific information on soil...

  20. Relationship between gas production and starch degradation in feed samples

    NARCIS (Netherlands)

    Chai, W.Z.; Gelder, van A.H.; Cone, J.W.

    2004-01-01

    An investigation was completed of the possibilities to estimate starch fermentation in rumen fluid using the gas production technique by incubating the total sample. Gas production from six starchy feed ingredients and eight maize silage samples were recorded and related to starch degradation

  1. Lignocellulose degradation, enzyme production and protein ...

    African Journals Online (AJOL)

    Microbial conversion of corn stover by white rot fungi has the potential to increase its ligninolysis and nutritional value, thereby transforming it into protein-enriched animal feed. Response surface methodology was applied to optimize conditions for the production of lignocellulolytic enzymes by Trametes versicolor during ...

  2. Thermal degradation study of silicon carbide threads developed for advanced flexible thermal protection systems

    Science.gov (United States)

    Tran, Huy Kim; Sawko, Paul M.

    1992-01-01

    Silicon carbide (SiC) fiber is a material that may be used in advanced thermal protection systems (TPS) for future aerospace vehicles. SiC fiber's mechanical properties depend greatly on the presence or absence of sizing and its microstructure. In this research, silicon dioxide is found to be present on the surface of the fiber. Electron Spectroscopy for Chemical Analysis (ESCA) and Scanning Electron Microscopy (SEM) show that a thin oxide layer (SiO2) exists on the as-received fibers, and the oxide thickness increases when the fibers are exposed to high temperature. ESCA also reveals no evidence of Si-C bonding on the fiber surface on both as-received and heat treated fibers. The silicon oxide layer is thought to signal the decomposition of SiC bonds and may be partially responsible for the degradation in the breaking strength observed at temperatures above 400 C. The variation in electrical resistivity of the fibers with increasing temperature indicates a transition to a higher band gap material at 350 to 600 C. This is consistent with a decomposition of SiC involving silicon oxide formation.

  3. Mechanisms Underpinning Degradation of Protective Oxides and Thermal Barrier Coatings in High Hydrogen Content (HHC) - Fueled Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Mumm, Daniel

    2013-08-31

    /thermo-chemical attack mechanisms; (iv) developing a mechanics-based analysis of the driving forces for crack growth and delamination, based on molten phase infiltration, misfit upon cooling, and loss of compliance; (v) understanding changes in TGO growth mechanisms associated with these emerging combustion product streams; and (vi) identifying degradation resistant alternative materials (including new compositions or bi-layer concepts) for use in mitigating the observed degradation modes. To address the materials stability concerns, this program integrated research thrusts aimed at: (1) Conducting tests in simulated syngas and HHC environments to evaluate materials evolution and degradation mechanisms; assessing thermally grown oxide development unique to HHC environmental exposures; carrying out high-resolution imaging and microanalysis to elucidate the evolution of surface deposits (molten phase formation and infiltration); exploring thermo-chemical instabilities; assessing thermo-mechanical drivers and thermal gradient effects on degradation; and quantitatively measuring stress evolution due to enhanced sintering and thermo-chemical instabilities induced in the coating. (2) Executing experiments to study the melting and infiltration of simulated ash deposits, and identifying reaction products and evolving phases associated with molten phase corrosion mechanisms; utilizing thermal spray techniques to fabricate test coupons with controlled microstructures to study mechanisms of instability and degradation; facilitating thermal gradient testing; and developing new materials systems for laboratory testing; (3) Correlating information on the resulting combustion environments to properly assess materials exposure conditions and guide the development of lab-scale simulations of material exposures; specification of representative syngas and high-hydrogen fuels with realistic levels of impurities and contaminants, to explore differences in heat transfer, surface degradation, and deposit

  4. Thermal degradation analysis of pongamia pinnata oil as alternative ...

    Indian Academy of Sciences (India)

    In this paper the feasibility of non-edible pongamia pinnata oil (PPO) as an alternative liquid dielectric which can be used in distribution transformers is examined. Hence, electrical, physical and chemical properties have been measured for thermally aged (with and without catalytic added) pongamia pinnata oil (PPO) and ...

  5. Modelling of Thermal Degradation Kinetics of Ascorbic Acid in ...

    African Journals Online (AJOL)

    Ascorbic acid (vitamin C) loss in thermally treated pawpaw and potato was modelled mathematically. Isothermal experiments in the temperature range of 50 -80 oC for the drying of pawpaw and 60 -100 oC for the blanch-drying of potato were utilized to determine the kinetics of ascorbic acid loss in both fruit and vegetable.

  6. Modelling of thermal degradation kinetics of ascorbic acid in ...

    African Journals Online (AJOL)

    Ascorbic acid (vitamin C) loss in thermally treated pawpaw and potato was modelled mathematically. Isothermal experiments in the temperature range of 50 -80 oC for the drying of pawpaw and 60 -100 oC for the blanch-drying of potato were utilized to determine the kinetics of ascorbic acid loss in both fruit and vegetable.

  7. Thermal degradation analysis of pongamia pinnata oil as alternative ...

    Indian Academy of Sciences (India)

    T Mariprasath

    Abstract. In this paper the feasibility of non-edible pongamia pinnata oil (PPO) as an alternative liquid dielectric which can be used in distribution transformers is examined. Hence, electrical, physical and chemical properties have been measured for thermally aged (with and without catalytic added) pongamia pinnata oil.

  8. Improving methane production from digested manure biofibers by mechanical and thermal alkaline pretreatment

    DEFF Research Database (Denmark)

    Tsapekos, Panagiotis; Kougias, Panagiotis; Frison, A.

    2016-01-01

    , enhancing fibers degradability by more than 4-fold. In continuous experiments, the thermal alkaline pretreatment, using 6% NaOH at 55 °C was proven to be the most efficient pretreatment method as the methane production was increased by 26%. The findings demonstrated that the methane production of the biogas...

  9. Thermal and pH degradation kinetics of anthocyanins in natural food colorant prepared from black rice bran.

    Science.gov (United States)

    Loypimai, Patiwit; Moongngarm, Anuchita; Chottanom, Pheeraya

    2016-01-01

    The study of the stability of anthocyanins in food colorant powder is important to predict the quality changes occurring as the food products are processed, to prevent and control the degradation of the anthocyanins. The objectives of this study were to identify anthocyanin components in natural food colorants obtained from black rice bran, and investigate their thermal stability at 60, 80, and 100 °C, pH stability from 2.0 to 5.0 and also their correlation with visual color, L (*), C (*), and h°. Results showed that only six types of anthocyanins, cyanidin-3-O-glucoside, cyanidin-3-O-rutinoside, delphinidin, cyanidin, pelargonidin and malvidin were present in raw black rice bran (BRB) and black rice bran colorant powder (BCP). The thermal degradation of both the visual color and the anthocyanin content in the BCP followed a first-order kinetic reaction model. The temperature-dependent degradation was adequately fitted to the Arrhenius equation. In terms of the pH stability, increasing pH values resulted in lower activation energies (E a ) and higher half-life (t 1/2 ) values for both color parameters and individual anthocyanins when heating from 60 to 100 °C. Moreover, the degradation rate constant (k) increased with increasing temperature and pH value. The degradation of cyanidin-3-O-glucoside and total anthocyanins showed a strong positive correlation with C (*). The changes in visual color may be used as an on-line quality control indicator during thermal processing of food products containing rice bran colorants which have high anthocyanin content.

  10. Physics Based Electrolytic Capacitor Degradation Models for Prognostic Studies under Thermal Overstress

    Science.gov (United States)

    Kulkarni, Chetan S.; Celaya, Jose R.; Goebel, Kai; Biswas, Gautam

    2012-01-01

    Electrolytic capacitors are used in several applications ranging from power supplies on safety critical avionics equipment to power drivers for electro-mechanical actuators. This makes them good candidates for prognostics and health management research. Prognostics provides a way to assess remaining useful life of components or systems based on their current state of health and their anticipated future use and operational conditions. Past experiences show that capacitors tend to degrade and fail faster under high electrical and thermal stress conditions that they are often subjected to during operations. In this work, we study the effects of accelerated aging due to thermal stress on different sets of capacitors under different conditions. Our focus is on deriving first principles degradation models for thermal stress conditions. Data collected from simultaneous experiments are used to validate the desired models. Our overall goal is to derive accurate models of capacitor degradation, and use them to predict performance changes in DC-DC converters.

  11. Theoretical investigation on degradation behaviors of spectral properties of thermal control coatings induced by charged particles

    Energy Technology Data Exchange (ETDEWEB)

    Han, Yuge; Ma, Wei; Xuan, Yimin, E-mail: ymxuan@mail.njust.edu.cn

    2013-10-01

    The degradation of spectral properties of thermal control coatings on spacecrafts is investigated in this paper. By studying their physical components and geometry structure, the factors which determine the spectral properties of the coatings are founded. A theoretical model for calculating the spectral absorptance of coatings is proposed based on the Mie's theory and Stratified Media theory. Mathematical expressions are introduced for accounting for the effect of the complicated environment. Based on these work, a predicting model for the degradation of spectral absorptance properties of the coatings is established. To validate this model, the predicted degradation performance of spectral properties of zinc oxide based coatings under electrons and protons exposure are compared with the experimental data. A good agreement is found at the wavelength between 250 nm and 2500 nm. Finally, a useful approach for predicting the degradation behaviors of thermal control coatings on spacecrafts in orbit is established.

  12. A study of poly(vinyl alcohol thermal degradation by thermogravimetry and differential thermogravimetry

    Directory of Open Access Journals (Sweden)

    Julián Esteban Barrera

    2010-04-01

    Full Text Available The thermal degradation of poly(vinyl alcohol (PVA having different degrees of hydrolysis and molecular weights was studied by thermogravimetry (TGA and differential thermogravimetry (DTGA. Four degradation events were identified whose intensity was related to the degree of hydrolysis. It was verified that the solid-state degradation mechanism for high hydrolysis degrees corresponded to eliminating water-forming side groups in stoichiometric amounts. The presence of acetate groups and lower melting points delayed the polymer’s thermal decomposition at lower hydrolysis degrees. There was no direct correlation in these samples between weight-loss during the first degradation event and the stoichiometric quantities which would be produced by eliminating the side groups. Reaction order and energy activation value qualitative coincidence was found by evaluating experimental data by using Freeman-Carroll and Friedman kinetic models.

  13. A study of poly(vinyl alcohol thermal degradation by thermogravimetry and differential thermogravimetry

    Directory of Open Access Journals (Sweden)

    Julián Esteban Barrera

    2007-05-01

    Full Text Available The thermal degradation of poly(vinyl alcohol (PVA having different degrees of hydrolysis and molecular weights was studied by thermogravimetry (TGA and differential thermogravimetry (DTGA. Four degradation events were identified whose intensity was related to the degree of hydrolysis. It was verified that the solid-state degradation mechanism for high hydrolysis degrees corresponded to eliminating water-forming side groups in stoichiometric amounts. The presence of acetate groups and lower melting points delayed the polymer’s thermal decomposition at lower hydrolysis degrees. There was no direct correlation in these samples between weight-loss during the first degradation event and the stoichiometric quantities which would be produced by eliminating the side groups. Reaction order and energy activation value qualitative coincidence was found by evaluating experimental data by using Freeman-Carroll and Friedman kinetic models.

  14. gaseous fuel production by anaerobic fungal degradation of banana ...

    African Journals Online (AJOL)

    JANICO

    Production and Collection of Gaseous Fuel. The prepared slurry was placed in a Vuchner filter flask (as reactor). The reactor was made airtight using plastic stopper and the outlet of the reactor was connected to a balloon using PVC tube. The degradation temperature was maintained at 330C using water bath within which ...

  15. Organochlorine Pesticides and Degradation Products in Soil around ...

    African Journals Online (AJOL)

    The levels and compositions of organochlorine pesticides and degradation products in soil samples collected from a former formulation plant in Morogoro municipality, Tanzania, were determined. Extraction was performed by pressurized fluid extraction using n-hexane:acetone (75:25) mixture. Clean-up of extracts was ...

  16. On the Influence of the Sample Absorptivity when Studying the Thermal Degradation of Materials

    Directory of Open Access Journals (Sweden)

    Pascal Boulet

    2015-08-01

    Full Text Available The change in absorptivity during the degradation process of materials is discussed, and its influence as one of the involved parameters in the degradation models is studied. Three materials with very different behaviors are used for the demonstration of its role: a carbon composite material, which is opaque, almost grey, a plywood slab, which is opaque and spectral-dependent and a clear PMMA slab, which is semitransparent. Data are analyzed for virgin and degraded materials at different steps of thermal degradation. It is seen that absorptivity and emissivity often reach high values in the range of 0.90–0.95 with a near-grey behavior after significant thermal aggression, but depending on the materials of interest, some significant evolution may be first observed, especially during the early stages of the degradation. Supplementary inaccuracy can come from the heterogeneity of the incident flux on the slab. As a whole, discrepancies up to 20% can be observed on the absorbed flux depending on the degradation time, mainly because of the spectral variations of the absorption and up to 10% more, depending on the position on the slab. Simple models with a constant and unique value of absorptivity may then lead to inaccuracies in the evaluation of the radiative flux absorption, with possible consequences on the pyrolysis analysis, especially for properties related to the early step of the degradation process, like the time to ignition, for example.

  17. On the Influence of the Sample Absorptivity when Studying the Thermal Degradation of Materials.

    Science.gov (United States)

    Boulet, Pascal; Brissinger, Damien; Collin, Anthony; Acem, Zoubir; Parent, Gilles

    2015-08-21

    The change in absorptivity during the degradation process of materials is discussed, and its influence as one of the involved parameters in the degradation models is studied. Three materials with very different behaviors are used for the demonstration of its role: a carbon composite material, which is opaque, almost grey, a plywood slab, which is opaque and spectral-dependent and a clear PMMA slab, which is semitransparent. Data are analyzed for virgin and degraded materials at different steps of thermal degradation. It is seen that absorptivity and emissivity often reach high values in the range of 0.90-0.95 with a near-grey behavior after significant thermal aggression, but depending on the materials of interest, some significant evolution may be first observed, especially during the early stages of the degradation. Supplementary inaccuracy can come from the heterogeneity of the incident flux on the slab. As a whole, discrepancies up to 20% can be observed on the absorbed flux depending on the degradation time, mainly because of the spectral variations of the absorption and up to 10% more, depending on the position on the slab. Simple models with a constant and unique value of absorptivity may then lead to inaccuracies in the evaluation of the radiative flux absorption, with possible consequences on the pyrolysis analysis, especially for properties related to the early step of the degradation process, like the time to ignition, for example.

  18. MMOD Protection and Degradation Effects for Thermal Control Systems

    Science.gov (United States)

    Christiansen, Eric

    2014-01-01

    Micrometeoroid and orbital debris (MMOD) environment overview Hypervelocity impact effects & MMOD shielding MMOD risk assessment process Requirements & protection techniques - ISS - Shuttle - Orion/Commercial Crew Vehicles MMOD effects on spacecraft systems & improving MMOD protection - Radiators Coatings - Thermal protection system (TPS) for atmospheric entry vehicles Coatings - Windows - Solar arrays - Solar array masts - EVA Handrails - Thermal Blankets Orbital Debris provided by JSC & is the predominate threat in low Earth orbit - ORDEM 3.0 is latest model (released December 2013) - http://orbitaldebris.jsc.nasa.gov/ - Man-made objects in orbit about Earth impacting up to 16 km/s average 9-10 km/s for ISS orbit - High-density debris (steel) is major issue Meteoroid model provided by MSFC - MEM-R2 is latest release - http://www.nasa.gov/offices/meo/home/index.html - Natural particles in orbit about sun Mg-silicates, Ni-Fe, others - Meteoroid environment (MEM): 11-72 km/s Average 22-23 km/s.

  19. Bacterial secondary production on vascular plant detritus: relationships to detritus composition and degradation rate.

    Science.gov (United States)

    Moran, M A; Hodson, R E

    1989-01-01

    Bacterial production at the expense of vascular plant detritus was measured for three emergent plant species (Juncus effusus, Panicum hemitomon, and Typha latifolia) degrading in the littoral zone of a thermally impacted lake. Bacterial secondary production, measured as tritiated thymidine incorporation into DNA, ranged from 0.01 to 0.81 microgram of bacterial C mg of detritus-1 day-1. The three plant species differed with respect to the amount of bacterial productivity they supported per milligram of detritus, in accordance with the predicted biodegradability of the plant material based on initial nitrogen content, lignin content, and C/N ratio. Bacterial production also varied throughout the 22 weeks of in situ decomposition and was positively related to the nitrogen content and lignin content of the remaining detritus, as well as to the temperature of the lake water. Over time, production was negatively related to the C/N ratio and cellulose content of the degrading plant material. Bacterial production on degrading plant material was also calculated on the basis of plant surface area and ranged from 0.17 to 1.98 micrograms of bacterial C cm-2 day-1. Surface area-based calculations did not correlate well with either initial plant composition or changing composition of the remaining detritus during decomposition. The rate of bacterial detritus degradation, calculated from measured production of surface-attached bacteria, was much lower than the actual rate of weight loss of plant material. This discrepancy may be attributable to the importance of nonbacterial organisms in the degradation and loss of plant material from litterbags or to the microbially mediated solubilization of particulate material prior to bacterial utilization, or both. PMID:2802603

  20. Biodegradable multifunctional oil production chemicals: Thermal polyaspartates

    Energy Technology Data Exchange (ETDEWEB)

    Ross, R.J. [Donlar Corporation (United States); Ravenscroft, P.D. [BP Exploration Operating Company, (United Kingdom)

    1996-12-31

    The paper deals with biodegradable oil production chemicals. Control of both mineral scale and corrosion with a single, environmentally acceptable material is an ambitious goal. Polyaspartate polymers represent a significant milestone in the attainment of this goal. Thermal polyaspartates (TPA) are polycarboxylate polymers derived via thermal condensation of the naturally occurring amino acid aspartic acid. These protein-like polymers are highly biodegradable and non-toxic, and are produced by an environmentally benign manufacturing process. TPAs exhibit excellent mineral scale inhibition activity and CO{sub 2} corrosion control. Laboratory data on scale inhibition and corrosion control in the North Sea oil field production applications is presented. 8 refs., 2 figs., 6 tabs.

  1. Gravitino production in a thermal Universe revisited

    Directory of Open Access Journals (Sweden)

    Richa Arya

    2017-09-01

    Full Text Available We study the production of spin 1/2 gravitinos in a thermal Universe. Taking into account supersymmetry breaking due to the finite thermal energy density of the Universe, there is a large enhancement in the cross section of production of these gravitino states. We consider gravitinos with zero temperature masses of 0.1 eV, 1 keV, 100 GeV and 30 TeV as representative of gauge mediated, gravity mediated and anomaly mediated supersymmetry breaking scenarios. We find that the abundance of gravitinos produced in the early Universe is very high for gravitinos of mass 1 keV and 100 GeV. The gravitino abundances can be sufficiently suppressed if the reheat temperature is less than 100 GeV and 4×104GeV respectively. However such low reheat temperatures will rule out many models of baryogenesis including those via leptogenesis.

  2. Gravitino production in a thermal Universe revisited

    Science.gov (United States)

    Arya, Richa; Mahajan, Namit; Rangarajan, Raghavan

    2017-09-01

    We study the production of spin 1/2 gravitinos in a thermal Universe. Taking into account supersymmetry breaking due to the finite thermal energy density of the Universe, there is a large enhancement in the cross section of production of these gravitino states. We consider gravitinos with zero temperature masses of 0.1 eV, 1 keV, 100 GeV and 30 TeV as representative of gauge mediated, gravity mediated and anomaly mediated supersymmetry breaking scenarios. We find that the abundance of gravitinos produced in the early Universe is very high for gravitinos of mass 1 keV and 100 GeV. The gravitino abundances can be sufficiently suppressed if the reheat temperature is less than 100 GeV and 4 ×104GeV respectively. However such low reheat temperatures will rule out many models of baryogenesis including those via leptogenesis.

  3. Thermal Degradation of Streptomycin Residues in Honey During Storage

    Directory of Open Access Journals (Sweden)

    Monica Cristina Cara

    2013-01-01

    Full Text Available In Europe there is an increasing emphasis on the quality control of honey, especially on maximum limits of veterinary drug residues (particularly antibiotics permitted in it. Streptomycin is an aminoglycoside antibiotic used in apiculture to protect bees against a variety of brood diseases. Romanian authorities have included it in the National Monitoring Program for honey manufacturers. In this study, an enzyme-linked immunosorbent assay (ELISA screening test was validated as a detection method of streptomycin residues in honey. The ELISA experimental results were compared to those obtained by using an HPLC method. The values generated by the two methods were very close to each other. This fact certifies that ELISA method can be successfully used for quantitative detection of the amount of streptomycin in honey samples. Following validation, three types of honey (polyfloral, lime and acacia were analyzed for streptomycin content after exposure to 4, 22, 30, 40 or 70 °C for 20 weeks. The results show that streptomycin mass fraction decreased with time and with the increase of temperature in all honey samples. The data collected were used to fit a second-order multiple linear regression model for predicting the degradation of streptomycin in honey samples as a function of temperature and storage period. Values of the calculated statistical indicators confirm a good predictive capability of mathematical and statistical models.

  4. Production and degradation of polyhydroxyalkanoates in waste environment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.Y.; Choi, J. [Korea Advanced Inst. of Science and Technology, Taejon (Korea, Republic of)

    1999-06-01

    Polyhydroxyalkanoates (PHAs) are energy/carbon storage materials accumulated under unfavorable growth condition in the presence of excess carbon source. PHAs are attracting much attention as substitute for non-degradable petrochemically derived plastics because of their similar material properties to conventional plastics and complete biodegradability under natural environment upon disposal. In this paper, PHA production and degradation in waste environment as well as its role in biological phosphorus removal are reviewed. In biological phosphorus removal process, bacteria accumulating polyphosphate (poly P) uptake carbon substrates and accumulate these as PHA by utilizing energy from breaking down poly P under anaerobic conditions. In the following aerobic condition, accumulated PHA is utilized for energy generation and for the regeneration of poly P. PHA production from waste has been investigated in order to utilize abundant organic compounds in waste water. Since PHA content and PHA productivity that can be obtained are rather low, PHA production from waste product should be considered as a coupled process for reducing the amount of organic waste. PHAs can be rapidly degraded to completion in municipal anaerobic sludge by various microorganisms.

  5. A metabolomics approach to identify factors influencing glucosinolate thermal degradation rates in Brassica vegetables.

    Science.gov (United States)

    Hennig, K; de Vos, R C H; Maliepaard, C; Dekker, M; Verkerk, R; Bonnema, G

    2014-07-15

    Thermal processing of Brassica vegetables can lead to substantial loss of potential health-promoting glucosinolates (GLs). The extent of thermal degradation of a specific GL varies in different vegetables, possibly due to differences in the composition of other metabolites within the plant matrices. An untargeted metabolomics approach followed by random forest regression was applied to identify metabolites associated to thermal GL degradation in a segregating Brassica oleracea population. Out of 413 metabolites, 15 were associated with the degradation of glucobrassicin, six with that of glucoraphanin and two with both GLs. Among these 23 metabolites three were identified as flavonols (one kaempferol- and two quercetin-derivatives) and two as other GLs (4-methoxyglucobrassicin, gluconasturtiin). Twenty quantitative trait loci (QTLs) for these metabolites, which were associated with glucoraphanin and glucobrassicin degradation, were identified on linkage groups C01, C07 and C09. Two flavonols mapped on linkage groups C07 and C09 and co-localise with the QTL for GL degradation determined previously. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Thermal degradation of new and aged urethane foam and epon 826 epoxy.

    Energy Technology Data Exchange (ETDEWEB)

    Kruizenga, Alan Michael [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Mills, Bernice E. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2013-08-01

    Thermal desorption spectroscopy was used to monitor the decomposition as a function of temperature for the foam and epoxy as a function of temperature in the range of 60C to 170C. Samples were studied with one day holds at each of the studied temperatures. Both new (FoamN and EpoxyN) and aged (FoamP and EpoxyP) samples were studied. During these ~10 day experiments, the foam samples lost 11 to 13% of their weight and the EpoxyN lost 10% of its weight. The amount of weight lost was difficult to quantify for EpoxyP because of its inert filler. The onset of the appearance of organic degradation products from FoamP began at 110C. Similar products did not appear until 120C for FoamN, suggesting some effect of the previous decades of storage for FoamP. In the case of the epoxies, the corresponding temperatures were 120C for EpoxyP and 110C for EpoxyN. Suggestions for why the aged epoxy seems more stable than newer sample include the possibility of incomplete curing or differences in composition. Recommendation to limit use temperature to 90-100C for both epoxy and foam.

  7. HEAVY AND THERMAL OIL RECOVERY PRODUCTION MECHANISMS

    Energy Technology Data Exchange (ETDEWEB)

    Anthony R. Kovscek

    2002-07-01

    This technical progress report describes work performed from April 1 through June 30, 2002, for the project ''Heavy and Thermal Oil Recovery Production Mechanisms.'' We investigate a broad spectrum of topics related to thermal and heavy-oil recovery. Significant results were obtained in the areas of multiphase flow and rock properties, hot-fluid injection, improved primary heavy oil recovery, and reservoir definition. The research tools and techniques used are varied and span from pore-level imaging of multiphase fluid flow to definition of reservoir-scale features through streamline-based history-matching techniques. Briefly, experiments were conducted to image at the pore level matrix-to-fracture production of oil from a fractured porous medium. This project is ongoing. A simulation studied was completed in the area of recovery processes during steam injection into fractured porous media. We continued to study experimentally heavy-oil production mechanisms from relatively low permeability rocks under conditions of high pressure and high temperature. High temperature significantly increased oil recovery rate and decreased residual oil saturation. Also in the area of imaging production processes in laboratory-scale cores, we use CT to study the process of gas-phase formation during solution gas drive in viscous oils. Results from recent experiments are reported here. Finally, a project was completed that uses the producing water-oil ratio to define reservoir heterogeneity and integrate production history into a reservoir model using streamline properties.

  8. Degradation of Teflon(trademark) FEP Following Charged Particle Radiation and Rapid Thermal Cycling

    Science.gov (United States)

    Townsend, Jacqueline; Powers, Charles; Viens, Michael; Ayres-Treusdell, Mary; Munoz, Bruno

    1999-01-01

    During the Second Servicing Mission (SM2) of the Hubble Space Telescope (HST) severe degradation was observed on the outer layer of the thermal control blankets. Astronaut observations and photographs revealed large cracks in the metallized Teflon(trademark) FEP (fluorinated ethylene propylene), the outer layer of the multi-layer insulation (MLI), in many locations around the telescope. In an effort to understand what elements of the space environment might cause such damage, pristine Teflon(trademark) FEP was tested for durability to radiation and thermal cycling. Specimens were subjected to electron and proton fluences comparable to those experienced by HST and were subsequently thermal cycled in a custom-built rapid thermal cycle chamber. Tensile tests of the specimens showed that radiation followed by thermal cycling significantly reduced the ultimate strength and elongation of Teflon(trademark) FEP.

  9. Degradation of Teflon(tm) FEP Following Charged Particle Radiation and Rapid Thermal Cycling

    Science.gov (United States)

    Townsend, Jacqueline; Powers, Charles; Viens, Michael; Ayres-Treusdell, Mary; Munoz, Bruno

    1998-01-01

    During the Second Servicing Mission (SM2) of the Hubble Space Telescope (HST) severe degradation was observed on the outer layer of the thermal control blankets. Astronaut observations and photographs revealed large cracks in the metallized Teflon(R) FEP (fluorinated ethylene propylene), the outer layer of the multi-layer insulation (MLI), in many locations around the telescope. In an effort to understand what elements of the space environment might cause such damage, pristine Teflon(R) FEP was tested for durability to radiation and thermal cycling. Specimens were subjected to electron and proton fluences comparable to those experienced by HST and were subsequently thermal cycled in a custom-built rapid thermal cycle chamber. Tensile tests of the specimens showed that radiation followed by thermal cycling significantly reduced the ultimate strength and elongation of Teflon(R) FEP.

  10. Counteraction of antibiotic production and degradation stabilizes microbial communities

    Science.gov (United States)

    Kelsic, Eric D.; Zhao, Jeffrey; Vetsigian, Kalin; Kishony, Roy

    2015-01-01

    Summary A major challenge in theoretical ecology is understanding how natural microbial communities support species diversity1-8, and in particular how antibiotic producing, sensitive and resistant species coexist9-15. While cyclic “rock-paper-scissors” interactions can stabilize communities in spatial environments9-11, coexistence in unstructured environments remains an enigma12,16. Here, using simulations and analytical models, we show that the opposing actions of antibiotic production and degradation enable coexistence even in well-mixed environments. Coexistence depends on 3-way interactions where an antibiotic degrading species attenuates the inhibitory interactions between two other species. These 3-way interactions enable coexistence that is robust to substantial differences in inherent species growth rates and to invasion by “cheating” species that cease producing or degrading antibiotics. At least two antibiotics are required for stability, with greater numbers of antibiotics enabling more complex communities and diverse dynamical behaviors ranging from stable fixed-points to limit cycles and chaos. Together, these results show how multi-species antibiotic interactions can generate ecological stability in both spatial and mixed microbial communities, suggesting strategies for engineering synthetic ecosystems and highlighting the importance of toxin production and degradation for microbial biodiversity. PMID:25992546

  11. Effect of fibrin degradation products on fibrinolytic process

    Directory of Open Access Journals (Sweden)

    T. A. Yatsenko

    2016-04-01

    Full Text Available Fibrin clot lysis by plasminogen/plasmin system results in fibrin degradation products formation with subsequent release into bloodstream. The fragments contain specific binding sites for fibrinolytic system components and can interact with them. In this study, we investigated the way in which fibrin fragments effect fibrinolytic process. We have shown that high molecular weight products of fibrin degradation and fibrin fragments of DDE-complex and DD, but not end product Е3, stimulate plasmin formation. Additionally, components of DDE-complex mixture of fragments Е1 and Е2 have potentiation ability. The intermediate fibrin fragments hmFDPs and DDE attenuate clot lysis by plasmin and hmFDPs protect plasmin from α2-antiplasmin inhibition but under further fragmentation to endpoint fibrin fragments loose this ability. The plasma inhibitors reduce fibrinolytic system activity generated by the degradation products. Thus, fibrin fragments formed during the clot lysis can bind and move out fibrinolytic system components from clot volume and in this way result in clot resistance to hydrolysis.

  12. Calcium-Magnesium-Aluminosilicate (CMAS) Infiltration and Cyclic Degradations of Thermal and Environmental Barrier Coatings in Thermal Gradients

    Science.gov (United States)

    Zhu, Dongming; Harder, Bryan; Smialek, Jim; Miller, Robert A.

    2014-01-01

    In a continuing effort to develop higher temperature capable turbine thermal barrier and environmental barrier coating systems, Calcium-Magnesium-Aluminosilicate (CMAS) resistance of the advanced coating systems needs to be evaluated and improved. This paper highlights some of NASA past high heat flux testing approaches for turbine thermal and environmental barrier coatings assessments in CMAS environments. One of our current emphases has been focused on the thermal barrier - environmental barrier coating composition and testing developments. The effort has included the CMAS infiltrations in high temperature and high heat flux turbine engine like conditions using advanced laser high heat flux rigs, and subsequently degradation studies in laser heat flux thermal gradient cyclic and isothermal furnace cyclic testing conditions. These heat flux CMAS infiltration and related coating durability testing are essential where appropriate CMAS melting, infiltration and coating-substrate temperature exposure temperature controls can be achieved, thus helping quantify the CMAS-coating interaction and degradation mechanisms. The CMAS work is also playing a critical role in advanced coating developments, by developing laboratory coating durability assessment methodologies in simulated turbine engine conditions and helping establish CMAS test standards in laboratory environments.

  13. Persistence of alprazolam in river water according to forced and non-forced degradation assays: adsorption to sediment and long-term degradation products.

    Science.gov (United States)

    Jiménez, Juan J; Sánchez, María I; Muñoz, Beatriz E; Pardo, Rafael

    2017-08-01

    Alprazolam is a pharmaceutical compound that it is detected in surface waters. Some degradation studies in aqueous solutions and pharmaceutical products are available, but there is no reliable information about its stability in river water. Here, assays have been conducted under forced biological, photochemical, and thermal conditions, and under non-forced conditions, to estimate the fate of alprazolam in river water and know its degradation products. The forced assays indicated that the biological and photochemical degradation of alprazolam was negligible; heating at 70°C for a long time barely affected it. The degradation of alprazolam in river water at 100 μg/L was about 5% after 36 weeks, keeping the water under a natural day-night cycle at room temperature and limiting partially the exposure to sunlight as happens inside a body of water; no change in concentration was observed when the monitoring was performed at 2 μg/L. The results suggest the persistence of alprazolam in surface water and a possible accumulation over time. Residues were monitored by ultra-pressure liquid chromatography/quadrupole time-of-flight/mass spectrometry after solid-phase extraction; nine degradation products were found and the structures for most of them were proposed from the molecular formulae and fragmentation observed in high-resolution tandem mass spectra. (5-chloro-2-(3-methyl-4H-1,2,4-triazol-4-yl)phenyl)(phenyl)methanol was the main long-term transformation product in conditions that simulate those in a mass of water. The degradation rate in presence of sediment was equally very low under non-forced conditions; adsorption coefficients of alprazolam and major degradation products were calculated. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  14. Thermal and pH degradation kinetics of anthocyanins in natural food colorant prepared from black rice bran

    OpenAIRE

    Loypimai, Patiwit; Moongngarm, Anuchita; Chottanom, Pheeraya

    2015-01-01

    The study of the stability of anthocyanins in food colorant powder is important to predict the quality changes occurring as the food products are processed, to prevent and control the degradation of the anthocyanins. The objectives of this study were to identify anthocyanin components in natural food colorants obtained from black rice bran, and investigate their thermal stability at 60, 80, and 100 °C, pH stability from 2.0 to 5.0 and also their correlation with visual color, L*, C*, and h°. ...

  15. In Situ Monitoring the Thermal Degradation of PCPDTBT Low Band Gap Polymers with Varying Alkyl Side-Chain Patterns

    OpenAIRE

    Marin, Lidia; Penxten, Huguette; Van Mierloo, Sarah; Carleer, Robert; Lutsen, Laurence; Vanderzande, Dirk; Maes, Wouter

    2013-01-01

    The degradation pattern of a series of low band gap PCPDTBT polymers under thermal stress is investigated by in situ UV-vis and FT-IR techniques combined with thermal degradation analysis. Thermogravimetric analysis is used to predetermine the decomposition intervals, revealing that thermolysis occurs in two stages. TG-TD-GC/MS shows that loss of the alkyl side chains predominantly happens within the first temperature regime and degradation of the polymer backbone occurs thereafter. UV-vis sp...

  16. Conversion of waste polystyrene through catalytic degradation into valuable products

    Energy Technology Data Exchange (ETDEWEB)

    Shah, Jasmin; Jan, Muhammad Rasul; Adnan [University of Peshawar, Peshawar (Pakistan)

    2014-08-15

    Waste expanded polystyrene (EPS) represents a source of valuable chemical products like styrene and other aromatics. The catalytic degradation was carried out in a batch reactor with a mixture of polystyrene (PS) and catalyst at 450 .deg. C for 30 min in case of Mg and at 400 .deg. C for 2 h both for MgO and MgCO{sub 3} catalysts. At optimum degradation conditions, EPS was degraded into 82.20±3.80 wt%, 91.60±0.20 wt% and 81.80±0.53 wt% liquid with Mg, MgO and MgCO{sub 3} catalysts, respectively. The liquid products obtained were separated into different fractions by fractional distillation. The liquid fractions obtained with three catalysts were compared, and characterized using GC-MS. Maximum conversion of EPS into styrene monomer (66.6 wt%) was achieved with Mg catalyst, and an increase in selectivity of compounds was also observed. The major fraction at 145 .deg. C showed the properties of styrene monomer. The results showed that among the catalysts used, Mg was found to be the most effective catalyst for selective conversion into styrene monomer as value added product.

  17. Thermal behavior and pyrolytic degradation kinetics of polymeric mixtures from waste packaging plastics

    Directory of Open Access Journals (Sweden)

    R. Tuffi

    2018-01-01

    Full Text Available The thermal behavior and pyrolytic kinetic analysis of main waste polymers (polypropylene (PP, polyethylene film (PE, poly(ethylene terephthalate (PET, polystyrene (PS and three synthetic mixtures representing commingled postconsumer plastics wastes (CPCPWs output from material recovery facilities were studied. Thermogravimetry (TG pyrolysis experiments revealed that the thermal degradation of single polymers and the synthetic mixture enriched in PP occurred in one single step. The other two mixtures underwent a two-consecutive, partially overlapping degradation steps, whose peaks related to the first-order derivative of TG were deconvoluted into two distinct processes. Further TG experiments carried out on binary mixtures (PS/PP, PET/PP, PET/PEfilm and PP/PEfilm showed a thermal degradation reliance on composition, structure and temperatures of single polymer components. A kinetic analysis was made for each step using the Kissinger-Akahira-Sunose (KAS method, thus determining almost constant activation energy (Ea for pyrolysis of PS, PET, PP and PE film in the range 0.25<α<0.85, unlike for pyrolysis of CPCPWs, with particular reference to CPCPW1 and the second step of CPCPW2 and CPCPW3, both ascribable to degradation of PP and PE film. To account for the reliability of these values the integral isoconversional modified method developed by Vyazovkin was also applied.

  18. Crystal structure, thermal behavior and enzymatic degradation of poly(tetramethylene adipate) solution-grown chain-folded lamellar crystals.

    Science.gov (United States)

    Iwata, Tadahisa; Kobayashi, Shiomi; Tabata, Kenji; Yonezawa, Noriyuki; Doi, Yoshiharu

    2004-03-15

    Solution-grown chain-folded lamellar single crystals of poly(tetramethylene adipate) (PTMA) were prepared from a dilute solution of 2-methyl-1-propanol by isothermal crystallization. PTMA crystals were hexagonal-shaped and polyethylene decoration of the crystals resulted in a "six cross-sector" surface morphology and showed that the average direction of chain folding is parallel to the crystal growth planes of [110] and [010]. Chain-folded lamellar crystals gave well-resolved electron diffraction diagrams corresponding to all the equatorial reflections of the X-ray fiber diagram obtained from stretched PTMA melt-quenched film (beta structure). The unit cell parameters of the beta structure of PTMA were determined as a = 0.503 nm, b = 0.732 nm and c (fiber axis) = 1.442 nm with an orthorhombic crystal system. The fiber repeat distance is appropriate for an all-trans backbone conformation for the straight stems. The setting angle, with respect to the a axis, is +/-46 degrees for the corner and center chains. Thermal behavior of lamellar crystals has been investigated by means of transmission electron microscopy (TEM) and atomic force microscopy (AFM). The lamellar thickness at the edges of the crystal increased after thermal treatment with taking the molecular chains into recrystallization parts; the holes then opened up at the thickening front of the crystal. The morphological changes of lamellar crystals after enzymatic degradation by Lipase type XIII from Pseudomonas sp. and water-soluble products were characterized by TEM, AFM, gel permeation chromatography, high performance liquid chromatography and fast atom bombardment mass spectrometry. The degradation progressed mainly from the edges of the lamellar crystals without decreasing the molecular weights and the lamellar thicknesses. The central portion of single crystals was often degraded by enzymatic attacks. This result combined with thermal behavior indicates that the loosely chain-packing region exists

  19. HEAVY AND THERMAL OIL RECOVERY PRODUCTION MECHANISMS

    Energy Technology Data Exchange (ETDEWEB)

    Anthony R. Kovscek

    2003-01-01

    This technical progress report describes work performed from October 1 through December 31, 2002 , for the project ''Heavy and Thermal Oil Recovery Production Mechanisms.'' In this project, a broad spectrum of research is undertaken related to thermal and heavy-oil recovery. The research tools and techniques used are varied and span from pore-level imaging of multiphase fluid flow to definition of reservoir-scale features through streamline-based history-matching techniques. During this period, experimental data regarding multidimensional imbibition was analyzed to obtain shape factors appropriate for dual-porosity simulation. It is shown that the usual assumption of constant, time-independent shape factors is incorrect. In other work, we continued to study the mechanisms by which oil is produced from fractured media at high pressure and high temperature. High temperature significantly increased the apparent wettability and affected water relative permeability of cores used in previous experiments. A phenomenological and mechanistic cause for this behavior is sought. Our work in the area of primary production of heavy oil continues with field cores and crude oil. On the topic of reservoir definition, work continued on developing techniques that integrate production history into reservoir models using streamline-based properties.

  20. Toluene degradation by non-thermal plasma combined with a ferroelectric catalyst.

    Science.gov (United States)

    Liang, Wen-Jun; Ma, Lin; Liu, Huan; Li, Jian

    2013-08-01

    Degradation of toluene in a gas by non-thermal plasma with a ferroelectric catalyst was studied at normal temperature and atmospheric pressure. Spontaneous polarization material (BaTiO3) and photocatalyst (TiO2) were added into plasma system simultively. Toluene degradation efficiency and specific energy density during the discharge process were investigated. Furthermore, byproducts and degradation mechanisms of toluene were also investigated. The toluene degradation efficiency increased when non-thermal plasma technology was combined with the catalyst. The toluene degradation efficiencies of the different catalysts tested were in the following order: BaTiO3/TiO2>BaTiO3>TiO2>no catalyst. A mass ratio of 2.38:1 was optimum for the BaTiO3 and TiO2 catalyst. The outlet gas was analyzed by gas chromatography and Fourier transform infrared spectroscopy, and the main compounds detected were CO2, H2O, O3 and benzene ring derivatives. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. Synchronized Analysis of FTIR Spectra and GCMS Chromatograms for Evaluation of the Thermally Degraded Vegetable Oils

    Directory of Open Access Journals (Sweden)

    Siong Fong Sim

    2014-01-01

    Full Text Available Fourier Transform Infrared (FTIR and Gas Chromatography Mass Spectrometry (GCMS are two common instruments used for analysis of edible oils. The output signal is often analysed on the software attached to the workstations. The processing software is usually individualised for a specific source. The output of GCMS cannot be analysed on the FTIR hence analysts often need to juggle between instruments when multiple techniques are employed. This could become exhaustive when a large dataset is involved. This paper reports a synchronised approach for analysis of signal from FTIR and GCMS. The algorithm is demonstrated on a dataset of edible oils to investigate the thermal degradation of seven types of edible oils treated at 100°C and 150°C. The synchronised routines identify peaks present in FTIR and GCMS spectra/chromatograms where the information is subsequently extracted onto peak tables for further analysis. In this study, it is found that palm based products and corn oils were relatively more stable with higher content of antioxidants tocopherols and squalene. As a conclusion, this approach allows simultaneous analysis of signal from multiple sources and samples enhancing the efficiency of the signal processing process.

  2. Study on the forced degradation behaviour of ledipasvir: Identification of major degradation products using LC-QTOF-MS/MS and NMR.

    Science.gov (United States)

    Swain, Debasish; Samanthula, Gananadhamu

    2017-05-10

    Ledipasvir, a novel NS5A inhibitor is used in the management of hepatitis C virus infections. The drug was subjected to forced degradation studies as per the conditions prescribed in ICH Q1 (R2) guideline. Ledipasvir degraded in hydrolytic (acid, alkaline and neutral) and oxidative stress conditions. The drug was found to be stable in thermal and photolytic conditions. Eight novel degradation products were obtained and were well separated using an HPLC C18 stationary phase (150×4.6mm, 5μm) and mobile phase composed of formic acid/acetonitrile in gradient elution mode. All the degradation products were characterised using tandem mass spectrometry with a time-of-flight analyser and the major degradation products of hydrolytic and oxidative stress were isolated and their structural confirmation was studied using 1 H and 13 C NMR. A well resolved chromatographic method proposed in this study suggests that the proposed analytical method finds its application as a stability indicating assay method for the drug and can be used in routine analysis. Copyright © 2017. Published by Elsevier B.V.

  3. Thermal Contributions to the Degradation of Ground-Laboratory- and Space-Irradiated Teflon Investigated

    Science.gov (United States)

    deGroh, Kim K.; Martin, Morgana

    2003-01-01

    The Hubble Space Telescope (HST) is covered with two primary types of thermal control materials, radiators and multilayer insulation blankets, which passively control temperatures during orbit. Both of these thermal control materials utilize back-surface metalized Teflon FEP (DuPont, fluorinated ethylene propylene) as the exterior (spacefacing) layer because of its excellent optical properties (low solar absorptance and high thermal emittance). The aluminized-FEP (Al-FEP) outermost layer of the multilayer insulation blankets on the HST has become embrittled while in space, resulting in severe on-orbit cracking (see the photographs). During the second servicing mission, an extremely embrittled piece of Al-FEP was retrieved that had curled, exposing the backsurface aluminum to space (see the photograph on the right). Because the aluminum surface has a lower thermal emittance than the FEP, this curled piece reached 200 C during orbit, 150 C higher than the nominal temperature extreme. To better understand the effect of temperature on the rate of degradation, and on the mechanism of degradation, of this insulation material in the low-Earth-orbit environment, researchers at the NASA Glenn Research Center conducted experiments to determine the effect of heating on the degradation of FEP that has been irradiated in a ground laboratory facility or in space on the HST. For this study, Teflon FEP retrieved from the HST during the third servicing mission after 9.7 years of space exposure was provided to Glenn by the NASA Goddard Space Flight Center.

  4. In vitro degradation and total gas production of byproducts generated in the biodiesel production chain

    National Research Council Canada - National Science Library

    Raissa Kiara Oliveira de Morais; Aderbal Marcos de Azevedo Silva; Leilson Rocha Bezerra; Heloisa Carneio; Milenna Nunes Moreira; Fabiola Franklin de Medeiros

    2015-01-01

    .... The oil seed press cakes of Moringa oleifeira had the highest rate of in vitro degradation of dry matter compared with other foods but did not result in a higher final volume of gases production...

  5. Solar thermal production of zinc: Program strategy

    Energy Technology Data Exchange (ETDEWEB)

    Steinfeld, A.; Weidenkaff, A.; Moeller, S.; Palumbo, R. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    The solar thermal production of zinc is considered for the conversion of solar energy into storable and transportable chemical fuels. The ultimate objective is to develop a technically and economically viable technology that can produce solar zinc. The program strategy for achieving such a goal involves research on two paths: a direct path via the solar thermal splitting of ZnO in the absence of fossil fuels, and an indirect path via the solar carbothermal/CH{sub 4}-thermal reduction of Zn O, with fossil fuels (coke or natural gas) as chemical reducing agents. Both paths make use of concentrated solar energy for high-temperature process heat. The direct path brings us to the complete substitution of fossil fuels with solar fuels for a sustainable energy supply system. The indirect path creates a link between today`s fossil-fuel-based technology and tomorrow`s solar chemical technology and builds bridges between present and future energy economies. (author) 1 fig., 15 refs.

  6. Magnetically driven rotation of thermal plasma jet for non-degradable CF{sub 4} treatment

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Sooseok, E-mail: choi@chemenv.titech.ac.jp [Department of Nuclear Engineering, Seoul National University (Korea, Republic of); Department of Environmental Chemistry and Engineering, Tokyo Institute of Technology (Japan); Hong, Sang Hee; Kim, Sungwoo [Department of Nuclear Engineering, Seoul National University (Korea, Republic of); Park, Dong-Wha [Department of Chemical Engineering and Regional Innovation Center for Environmental Technology of Thermal Plasma, Inha University (Korea, Republic of); Watanabe, Takayuki [Department of Environmental Chemistry and Engineering, Tokyo Institute of Technology (Japan)

    2012-11-15

    Effects of an externally applied magnetic field on the thermal plasma treatment of non-degradable greenhouse gas were investigated. Tetrafluoromethane (CF{sub 4}) was decomposed as a waste gas, because it is the most stable species among perfluorocompounds and has the highest global warming potential. A permanent magnet equipped on the exit region of a hollow electrode plasma torch produced azimuthal Lorentz force to drive rotational motions of the arc root and the thermal plasma jet. In order to sustain a stable arc discharge, the position of the permanent magnet was determined by numerical analysis on the temperature distribution according to the length of arc column. Forcibly swirling motion of thermal plasma jet was observed in accordance with the strength of applied magnetic field. Increased destruction and removal efficiency of CF{sub 4} was measured in torch operation with the externally applied magnetic field due to the enhanced entrainment of waste gas into the thermal plasma jet.

  7. Monitoring chemical degradation of thermally cycled glass-fibre composites using hyperspectral imaging

    Science.gov (United States)

    Papadakis, V. M.; Müller, B.; Hagenbeek, M.; Sinke, J.; Groves, R. M.

    2016-04-01

    Nowadays, the application of glass-fibre composites in light-weight structures is growing. Although mechanical characterizations of those structures are commonly performed in testing, chemical changes of materials under stresses have not yet been well documented. In the present work coupon tests and Hyperspectral Imaging (HSI) have been used to categorise possible chemical changes of glass-fibre reinforced polymers (GFRP) which are currently used in the aircraft industry. HSI is a hybrid technique that combines spectroscopy with imaging. It is able to detect chemical degradation of surfaces and has already been successfully applied in a wide range of fields including astronomy, remote sensing, cultural heritage and medical sciences. GFRP specimens were exposed to two different thermal loading conditions. One thermal loading condition was a continuous thermal exposure at 120°C for 24h, 48 h and 96h, i.e. ageing at a constant temperature. The other thermal loading condition was thermal cycling with three different numbers of cycles (4000, 8000, 12000) and two temperature ranges (0°C to 120°C and -25°C to 95°C). The effects of both conditions were measured using both HSI and interlaminar shear (ILSS) tests. No significant changes of the physical properties of the thermally cycled GFRP specimens were detected using interlaminar shear strength tests and optical microscopy. However, when using HIS, differences of the surface conditions were detected. The results showed that the different thermal loading conditions could be successfully clustered in different colours, using the HSI linear unmixing technique. Each different thermal loading condition showed a different chemical degradation level on its surface which was indicated using different colours.

  8. Data of thermal degradation and dynamic mechanical properties of starch–glycerol based films with citric acid as crosslinking agent

    Directory of Open Access Journals (Sweden)

    Paula González Seligra

    2016-06-01

    Full Text Available Interest in biodegradable edible films as packaging or coating has increased because their beneficial effects on foods. In particular, food products are highly dependents on thermal stability, integrity and transition process temperatures of the packaging. The present work describes a complete data of the thermal degradation and dynamic mechanical properties of starch–glycerol based films with citric acid (CA as crosslinking agent described in the article titled: “Biodegradable and non-retrogradable eco-films based on starch–glycerol with citric acid as crosslinking agent” González Seligra et al. (2016 [1]. Data describes thermogravimetric and dynamical mechanical experiences and provides the figures of weight loss and loss tangent of the films as a function of the temperature.

  9. Data of thermal degradation and dynamic mechanical properties of starch-glycerol based films with citric acid as crosslinking agent.

    Science.gov (United States)

    González Seligra, Paula; Medina Jaramillo, Carolina; Famá, Lucía; Goyanes, Silvia

    2016-06-01

    Interest in biodegradable edible films as packaging or coating has increased because their beneficial effects on foods. In particular, food products are highly dependents on thermal stability, integrity and transition process temperatures of the packaging. The present work describes a complete data of the thermal degradation and dynamic mechanical properties of starch-glycerol based films with citric acid (CA) as crosslinking agent described in the article titled: "Biodegradable and non-retrogradable eco-films based on starch-glycerol with citric acid as crosslinking agent" González Seligra et al. (2016) [1]. Data describes thermogravimetric and dynamical mechanical experiences and provides the figures of weight loss and loss tangent of the films as a function of the temperature.

  10. Thermal degradation and morphological studies on raw and reinforced polyacrylic rubbers

    Science.gov (United States)

    Sasikala, A.; Kala, A.

    2017-05-01

    Poly acrylate rubbers (ACM) of today are saturated copolymers of monomeric acrylic esters and reactive cure site monomers. ACM elastomer have also found use in vibration damping due to its excellent resilience. Other applications include textiles, adhesives, and coatings. Two state of Poly acrylic raw and reinforced Rubber are analyzed using FTIR spectroscopy, Optical Microscopy, DSC and TGA measurements. With the objective of determined the mechanical strength, Thermal analysis on TGA and DSC studies show that, the thermal degradation temperature Tg of the sample material is obtained and activation energy is also calaulated by Broido, Horowitz - Metzger, Piloyan-Novikova and Coats Redfern methods which are found.

  11. ANALYTICAL METHOD DEVELOPMENT FOR ALACHLOR ESA AND OTHER ACETANILIDE HERBICIDE DEGRADATION PRODUCTS

    Science.gov (United States)

    In 1998, USEPA published a Drinking Water Contaminant Candidate List (CCL) of 50 chemicals and 10 microorganisms. "Alachlor ESA and other acetanilide herbicide degradation products" is listed on the the 1998 CCL. Acetanilide degradation products are generally more water soluble...

  12. Thermal degradation, antioxidant and antimicrobial activity of the synthesized allicin and allicin incorporated in gel

    OpenAIRE

    Ilić Dušica P.; Nikolić Vesna D.; Nikolić Ljubiša B.; Stanković Mihajlo Z.; Stanojević Ljiljana P.

    2010-01-01

    The main carriers of the pharmacological activity of garlic (Allium sativum L.) are organic sulfur compounds, the most important among them being allicin, a sulfenic acid thioester, or allylthiosulfonate. In this paper, the identification of synthesized and purified allicin was determined by using various spectroscopic methods (UV/VIS, FTIR, NMR). A HPLC method was developed for the detection and determination of the allicin content. The thermal degradation of allicin by using FTIR method was...

  13. Estimate carbon emissions from degraded permafrost with InSAR and a soil thermal model

    Science.gov (United States)

    Zhou, Z.; Liu, L.

    2016-12-01

    Climate warming, tundra fire over past decades has caused degradation in permafrost widely and quickly. Recent studies indicate that an increase in degradation could switch permafrost from a carbon sink to a source, with the potential of creating a positive feedback to anthropogenic climate warming. Unfortunately, Soil Organic Carbon (SOC) emissions from degraded permafrost unquantified, and limit our ability to understand SOC losses in arctic environments. This work will investigate recent 10 years of data already collected at the Anaktuvuk River fire (both ground and remote sensed), and will employ a soil thermal model to estimate SOC emission in this region. The model converts the increases in Active Layer Thickness (ALT), as measured by InSAR, to changes in Organic Layer Thickness (OLT), and SOC. ALOS-1/2 L-band SAR dataset will be used to produce the ATL changes over the study area. Soil prosperities (e.g. temperature at different depth, bulk density) will be used in the soil thermal model to estimate OLT changes and SOC losses. Ground measurement will validate the InSAR results and the soil thermal model. A final estimation of SOC emission will be produced in Anaktuvuk River region.

  14. Enhanced enzymatic cellulose degradation by cellobiohydrolases via product removal

    DEFF Research Database (Denmark)

    Ahmadi Gavlighi, Hassan; Meyer, Anne S.; Mikkelsen, Jørn Dalgaard

    2013-01-01

    Product inhibition by cellobiose decreases the rate of enzymatic cellulose degradation. The optimal reaction conditions for two Emericella (Aspergillus) nidulans-derived cellobiohydrolases I and II produced in Pichia pastoris were identified as CBHI: 52 °C, pH 4.5–6.5, and CBHII: 46 °C, pH 4.......8. The optimum in a mixture of the two was 50 °C, pH 4.9. An almost fourfold increase in enzymatic hydrolysis yield was achieved with intermittent product removal of cellobiose with membrane filtration (2 kDa cut-off): The conversion of cotton cellulose after 72 h was ~19 % by weight, whereas the conversion...... achievable by intermittent product removal during cellulose hydrolysis....

  15. Thermal degradation kinetics of polyketone based on styrene and carbon monoxide

    Energy Technology Data Exchange (ETDEWEB)

    Mu, Jiali, E-mail: jiaqm411@163.com; Fan, Wenjun; Shan, Shaoyun; Su, Hongying; Wu, Shuisheng; Jia, Qingming

    2014-03-01

    Highlights: • The PK were synthesized from carbon monoxide and styrene in the presence of PANI-PdCl{sub 2} catalyst and PdCl{sub 2} catalyst. • The structures and thermal behaviors of PK prepared by homogenous and the supported catalyst were investigated. • The microstructures of PK were changed in the supported catalyst system. • The alternating PK copolymer (PANI-PdCl{sub 2} catalyst) was more thermally stable than PK (PdCl{sub 2} catalyst). • The degradation activation energy values were estimated by Flynn–Wall–Ozawa method and Kissinger method. - Abstract: Copolymerization of styrene with carbon monoxide to give polyketones (PK) was carried out under homogeneous palladium catalyst and polyaniline (PANI) supported palladium(II) catalyst, respectively. The copolymers were characterized by {sup 1}H NMR, {sup 13}C NMR and GPC. The results indicated that the PK catalyzed by the supported catalyst has narrow molecular weight distribution (PDI = 1.18). For comparison purpose of thermal behaviors of PK prepared by the homogeneous and the supported catalyst, thermogravimetric (TG) analysis and derivative thermogravimetric (DTG) were conducted at different heating rates. The peak temperatures (396–402 °C) for PK prepared by the supported catalyst are higher than those (387–395 °C) of PK prepared by the homogeneous catalyst. The degradation activation energy (E{sub k}) values were estimated by Flynn–Wall–Ozawa method and Kissinger method, respectively. The E{sub k} values, as determined by two methods, were found to be in the range 270.72 ± 0.03–297.55 ± 0.10 kJ mol{sup −1}. Structures analysis and thermal degradation analysis revealed that the supported catalyst changed the microstructures of PK, resulting in improving thermal stability of PK.

  16. Analysis of thermal process of pozzolan production

    Directory of Open Access Journals (Sweden)

    Mejía De Gutiérrez, R.

    2004-06-01

    Full Text Available The objective of this study was evaluated the effect of heat treatment parameters on the pozzolanic activity of natural kaolin clays. The experimental design included three factors: kaolin type, temperature and time. Five types of Colombian kaolin clays were thermally treated from 400 to 1000 °C by 1, 2, and 3 hours. The raw materials and the products obtained were characterized by X-Ray Diffraction (XRD, Fourier Transform Infrared Spectroscopy (FTIR and Differential Thermal / Thermo gravimetric Analysis (DTAJ TGA. The pozzolanic activity of thermally treated samples according to chemical and mechanical tests was investigated.

    El objetivo de este estudio fue caracterizar las variables de producción de un metacaolín de alta reactividad puzolánica. El diseño experimental utilizó un modelo factorial que consideró tres factores: tipo de caolín (C, temperatura y tiempo. A partir del conocimiento de las fuentes de caolín y el contacto con proveedores y distribuidores del producto a nivel nacional, se seleccionaron cinco muestras representativas de arcillas caoliníticas, las cuales se sometieron a un tratamiento térmico entre 400 y 1.000 ºC (seis niveles de temperatura y tres tiempos de exposición, 1, 2 y 3 horas. Los caolines de origen y los productos obtenidos de cada proceso térmico fueron evaluados mediante técnicas de tipo físico y químico, difracción de rayos X, infrarrojo FTIR, y análisis térmico diferencial (OTA, TGA. Complementariamente se evalúa la actividad puzolánica, tanto química como mecánica, del producto obtenido a diferentes temperaturas de estudio.

  17. Degradation of polysorbates 20 and 80: studies on thermal autoxidation and hydrolysis.

    Science.gov (United States)

    Kishore, Ravuri S K; Pappenberger, Astrid; Dauphin, Isabelle Bauer; Ross, Alfred; Buergi, Beatrice; Staempfli, Andreas; Mahler, Hanns-Christian

    2011-02-01

    The purpose of this work was to study the mechanistic pathways of degradation of polysorbates (PS) 20 and PS80 in parenteral formulations. The fate of PS in typical protein formulations was monitored and analyzed by a variety of methods, including (1)H NMR, high-performance liquid chromatography/evaporative light scattering detection, and ultraviolet-visible spectroscopy. Oxidative degradation of PS in neat raw material was studied using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and headspace gas chromatography-mass spectrometry. TGA-DSC studies revealed that autoxidation via a radical mechanism is dominated by statistical random scission in PS20 and PS80. Thermal initiation of radical formation occurs at the polyoxyethylene (POE) as well as the olefin sites. In PS80, radical initiation at the olefinic site precedes initiation at the POE site, leading to modified degradation profile. Corresponding to these results, in aqueous formulations, a surge peroxide content was detected in PS20-containing samples and in higher concentrations in those containing PS80. Hydrolysis in aqueous formulations, as followed by (1)H NMR, was found to have a half-life of 5 months at 40°C. On the basis of the obtained results, PSs degrade mainly via autoxidation and also via hydrolysis at higher temperatures. Further studies are required to investigate on potential effects of degradation on surface activity and protein stability in PS-containing formulations. Copyright © 2010 Wiley-Liss, Inc.

  18. The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene-styrene (ABS) copolymer.

    Science.gov (United States)

    Brebu, Mihai; Bhaskar, Thallada; Murai, Kazuya; Muto, Akinori; Sakata, Yusaku; Uddin, Md Azhar

    2004-08-01

    Acrylonitrile-butadiene-styrene (ABS) copolymers without and with a polybrominated epoxy type flame retardant were thermally degraded at 450 degrees C alone (10 g) and mixed with polyvinylchloride (PVC) (8 g/2 g). Gaseous and liquid products of degradation were analysed by various gas chromatographic methods (GC with TCD, FID, AED, MSD) in order to determine the individual and cumulative effect of bromine and chlorine on the quality and quantity of degradation compounds. It was found that nitrogen, chlorine, bromine and oxygen are present as organic compounds in liquid products, their quantity depends on the pyrolysed polymer or polymer mixture. Bromophenol and dibromophenols were the main brominated compounds that come from the flame retardant. 1-Chloroethylbenzene was the main chlorine compound observed in liquid products. It was also determined that interactions appear at high temperatures during decomposition between the flame retardant, PVC and the ABS copolymer.

  19. Characterization of degradation products of silodosin under stress conditions by liquid chromatography/Fourier transform mass spectrometry.

    Science.gov (United States)

    Pandeti, Sukanya; Narender, Tadigoppula; Prabhakar, Sripadi; Reddy, Thota Jagadeswar

    2017-03-30

    Silodosin (SDN) is a novel α 1 -adrenoceptor antagonist in the treatment of benign prostatic hyperplasia (BPH). The presence of degradation products in a drug affects not only the quality, but also the safety and efficacy of drug formulation. Thus, it is essential to develop an efficient analytical method which could be useful to selectively separate, identify and characterise of all possible degradation products of SDN which is mandatory in drug development processes. SDN was subjected to forced degradation under hydrolytic (acid, base and neutral), oxidative, photolytic and thermal stress conditions. Separation of the drug and degradation products was achieved by a liquid chromatography (LC) method using an Acquity UPLC® BEH C18 (2.1 × 100 mm, 1.7 μm; Waters) column with mobile phase consisting of 0.1% formic acid (FA) in water (A) and 0.1% FA in acetonitrile (ACN) and methanol (MeOH) (1:1) (B) as organic modifier at a flow rate of 0.15 mL min -1 in gradient elution mode. Identification and characterization of the degradation products was performed by mass spectrometry methods using an LTQ-Orbitrap mass spectrometer. A total of five degradation products (DP1 to DP5) were formed under various stress conditions and their structures were proposed with the help of tandem mass spectrometry (MS/MS) experiments and high-resolution mass spectral data. A common degradation product (DP1) was observed under acidic and basic degradation conditions. DP2 was observed under acidic, DP4 and DP5 were observed under basic hydrolytic conditions, whereas DP3 was observed under oxidative conditions. SDN was found to be labile under hydrolytic and oxidative conditions. The structures of all the degradation products were proposed. The most rational mechanisms for the formation of the degradation products under different stress conditions have been established. The proposed method can be effectively used to carry out the determination and detection of SDN and its degradation

  20. Rapid estimation of glucosinolate thermal degradation rate constants in leaves of Chinese kale and broccoli (Brassica oleracea) in two seasons.

    Science.gov (United States)

    Hennig, Kristin; Verkerk, Ruud; Bonnema, Guusje; Dekker, Matthijs

    2012-08-15

    Kinetic modeling was used as a tool to quantitatively estimate glucosinolate thermal degradation rate constants. Literature shows that thermal degradation rates differ in different vegetables. Well-characterized plant material, leaves of broccoli and Chinese kale plants grown in two seasons, was used in the study. It was shown that a first-order reaction is appropriate to model glucosinolate degradation independent from the season. No difference in degradation rate constants of structurally identical glucosinolates was found between broccoli and Chinese kale leaves when grown in the same season. However, glucosinolate degradation rate constants were highly affected by the season (20-80% increase in spring compared to autumn). These results suggest that differences in glucosinolate degradation rate constants can be due to variation in environmental as well as genetic factors. Furthermore, a methodology to estimate rate constants rapidly is provided to enable the analysis of high sample numbers for future studies.

  1. Mass spectrometric comparison of swift heavy ion-induced and anaerobic thermal degradation of polymers

    Science.gov (United States)

    Lima, V.; Hossain, U. H.; Walbert, T.; Seidl, T.; Ensinger, W.

    2018-03-01

    The study of polymers irradiated by highly energetic ions and the resulting radiation-induced degradation is of major importance for space and particle accelerator applications. The mechanism of ion-induced molecular fragmentation of polyethylene, polyethyleneimine and polyamide was investigated by means of mass spectrometry and infrared spectroscopy. The results show that the introduction of nitrogen and oxygen into the polymer influences the stability rendering aliphatic polymers with heteroatoms less stable. A comparison to thermal decomposition data from literature reveals that ion-induced degradation is different in its bond fracture mechanism. While thermal degradation starts at the weakest bond, which is usually the carbon-heteroatom bond, energetic ion irradiation leads in the first step to scission of all types of bonds creating smaller molecular fragments. This is due to the localized extreme energy input under non-equilibrium conditions when the ions transfer kinetic energy onto electrons. These findings are of relevance for the choice of polymers for long-term application in both space and accelerator facilities.

  2. Thermal/chemical degradation of ceramic cross-flow filter materials

    Energy Technology Data Exchange (ETDEWEB)

    Alvin, M.A.; Lane, J.E.; Lippert, T.E.

    1989-11-01

    This report summarizes the 14-month, Phase 1 effort conducted by Westinghouse on the Thermal/Chemical Degradation of Ceramic Cross-Flow Filter Materials program. In Phase 1 expected filter process conditions were identified for a fixed-bed, fluid-bed, and entrained-bed gasification, direct coal fired turbine, and pressurized fluidized-bed combustion system. Ceramic cross-flow filter materials were also selected, procured, and subjected to chemical and physical characterization. The stability of each of the ceramic cross-flow materials was assessed in terms of potential reactions or phase change as a result of process temperature, and effluent gas compositions containing alkali and fines. In addition chemical and physical characterization was conducted on cross-flow filters that were exposed to the METC fluid-bed gasifier and the New York University pressurized fluidized-bed combustor. Long-term high temperature degradation mechanisms were proposed for each ceramic cross-flow material at process operating conditions. An experimental bench-scale test program is recommended to be conducted in Phase 2, generating data that support the proposed cross-flow filter material thermal/chemical degradation mechanisms. Papers on the individual subtasks have been processed separately for inclusion on the data base.

  3. Identification of major degradation products of 5-aminosalicylic acid formed in aqueous solutions and in pharmaceuticals

    DEFF Research Database (Denmark)

    Jensen, J.; Cornett, Claus; Olsen, C. E.

    1992-01-01

    The formation of four major degradation products of 5-aminosalicylic acid (5-ASA) in buffered solutions at pH 7.0 was demonstrated by gradient HPLC analysis. The isolation and structural elucidation of the resulting degradation products showed that the degradation of 5-ASA led to the formation...

  4. Effect of various nanofillers on thermal stability and degradation kinetics of polymer nanocomposites.

    Science.gov (United States)

    Choudhury, Anusuya; Bhowmick, Anil K; Ong, Christopher; Soddemann, Matthias

    2010-08-01

    Structure of nanofillers and their subsequent interaction with a polymer is very important in determining thermal stability of polymer nanocomposite. In this paper, we tried to correlate structure of various 0, 1 and 2 dimensional nanofillers with the thermal stability of hydrogenated nitrile butadiene rubber (HNBR) nanocomposites. Organically modified and unmodified layered silicates such as montmorillonite (Cloisite Na+, Cloisite 30B and Cloisite 15A), rod-like fibrous filler (sepiolite) and spherical nanoparticles (nanosilica) were chosen for this purpose. A significant improvement in thermal stability (obtained by thermogravimeric analysis and differential scanning calorimetry) was observed for silica-filled nanocomposites. However, the activation energy of the nanocomposites calculated by different kinetic methods (both non-isothermal and isothermal methods) was found to be significantly high for sepiolite, 30B and silica-filled nanocomposites. The results were explained with the help of structure of the nanofillers, their interaction with the elastomer and the subsequent dispersion, as measured by X-ray diffraction, transmission electron microscopy and atomic force microscopy. From these analyses it was concluded that organically modified montmorillonite, sepiolite and nanosilica increase the thermal stability of the nanocomposite to a great extent due to the interaction of the reactive groups on the surface of these fillers with the polymer and high thermal stability of these inorganic fillers. Finally, degradation mechanism of HNBR in presence of the nanofillers at severe operating temperatures was investigated with the help of FTIR spectroscopy.

  5. Photocatalytic degradation of organic pollutants with simultaneous production of hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Patsoura, Alexia; Kondarides, Dimitris I.; Verykios, Xenophon E. [Department of Chemical Engineering, University of Patras, GR-26504 Patras (Greece)

    2007-06-30

    The photocatalytic degradation of a number of organic compounds in solution, including alcohols and organic acids, has been investigated under unaerated conditions with the use of Pt/TiO{sub 2} photocatalyst and solar or UV irradiation. It has been found that production of CO{sub 2} is in all cases accompanied by evolution of hydrogen, the production rate of which is significantly enhanced, compared with that obtained in the absence of organic additives in solution. Results are explained by considering that organic compounds act as sacrificial electron donors, which become progressively oxidized toward CO{sub 2} by consuming photogenerated holes and/or oxygen. This results in decreased rates of electron-hole recombination and oxygen-hydrogen back reaction and, concomitantly, in increased H{sub 2}-production rates. The rate of photoinduced hydrogen production depends strongly on the concentration of the sacrificial agent employed and to a lesser extent on solution pH and temperature. When complete mineralization of the sacrificial agent is achieved, photogenerated oxygen can no longer be removed from the photocatalyst surface and the H{sub 2}-production rate drops to steady-state values, comparable to those obtained in the absence of the organic compound in solution. The amounts of carbon dioxide and 'additional' hydrogen produced depend on the nature of the organic additive and are directly proportional to its initial concentration in solution. Quantification of results shows that the overall process may be described as 'photoinduced reforming of organic compounds at room temperature'. It is concluded that mineralization of organic pollutants such as alcohols and organic acids, which are common waste products of biomass processing industries, can be achieved with simultaneous production of H{sub 2} fuel. The process may provide an efficient and cost effective method for cleaning up waste streams. (author)

  6. Thermal degradation mechanism of addition-cure liquid silicone rubber with urea-containing silane

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Weizhen; Zeng, Xingrong, E-mail: psxrzeng@gmail.com; Lai, Xuejun; Li, Hongqiang; Chen, Wanjuan; Zhang, Yajun

    2015-04-10

    Highlights: • The urea-containing silane was incorporated into addition-cure liquid silicone rubber (ALSR) via hydrosilylation reaction. • The thermal stability of the ALSR was improved by DEUPAS both in nitrogen and air • The TG–FTIR of evolved gases during degradation was performed. • The possible degradation mechanism of the ALSR samples was proposed. - Abstract: The reactive urea-containing silane, (γ-diethylureidopropyl) allyloxyethoxysilane (DEUPAS), was synthesized by the trans-etherification reaction. The chemical structure was characterized by Fourier transform infrared spectrometry (FTIR) and {sup 1}H nuclear magnetic resonance spectrometry ({sup 1}H NMR). Subsequently, DEUPAS was incorporated into addition-cure liquid silicone rubber (ALSR) via hydrosilylation reaction. The thermal stability of the ALSR samples was investigated by thermogravimetry (TG) and thermogravimetry–Fourier transform infrared spectrometry (TG–FTIR). When DEUPAS was incorporated, the temperature of 10% weight loss and 20% weight loss under air atmosphere were respectively increased by 31 °C and 60 °C compared with those of the ALSR without DEUPAS. Meanwhile, the residual weight at 800 °C increased from 33.5% to 58.7%. It was found that the striking enhancement in thermal stability of the ALSR samples was likely attributed to the decomposition of the urea groups to isocyanic acid, which reacted with hydroxyl groups to inhibit the unzipping depolymerization.

  7. Indigenous production of biosurfactant and degradation of crude oil

    Directory of Open Access Journals (Sweden)

    Hamid Rashedi

    2015-04-01

    Full Text Available The present study investigated the isolation and identification of biosurfactant producing bacteria from Iranian oil wells. The biosurfactant production of bacteria isolates was evaluated and confirmed using hemolysis and emulsification tests. The biodegradation of crude oil was studied using GC and HPLC analysis. A total of 45 strains have been isolated. These strains showed less than a 40 mN m-1 reduction in surface tension. The effects of different pH (4.2-9.2, salinity concentrations (1%-15%, and temperatures (25-50 in biosurfactant production of isolated strains were evaluated. One of the strains (Bacillus sp. NO.4 showed a high salt tolerance and a successful production of biosurfactant in a vast pH range. Its maximum biomass production (about 3.1 g L-1 dry weight was achieved after 60 hours of growth. The surface tension of the culture broth dropped rapidly after inoculation and reached its lowest value (36 mN m-1 during the exponential phase after about 36-48 hours of growth. The study of the GC graphs showed that higher aliphatic reduction occurred in fractions with C14 to C24 hydrocarbons. The depicted results of the HPLC graphs indicated a 100% degradation of chrysene and fluorine. In this study, we demonstrated the useful capacities of the isolates in removing oil pollutants and their application in MEOR in vitro.

  8. Magnesium degradation products: effects on tissue and human metabolism.

    Science.gov (United States)

    Seitz, J-M; Eifler, R; Bach, Fr-W; Maier, H J

    2014-10-01

    Owing to their mechanical properties, metallic materials present a promising solution in the field of resorbable implants. The magnesium metabolism in humans differs depending on its introduction. The natural, oral administration of magnesium via, for example, food, essentially leads to an intracellular enrichment of Mg(2+) . In contrast, introducing magnesium-rich substances or implants into the tissue results in a different decomposition behavior. Here, exposing magnesium to artificial body electrolytes resulted in the formation of the following products: magnesium hydroxide, magnesium oxide, and magnesium chloride, as well as calcium and magnesium apatites. Moreover, it can be assumed that Mg(2+) , OH(-) ions, and gaseous hydrogen are also present and result from the reaction for magnesium in an aqueous environment. With the aid of physiological metabolic processes, the organism succeeds in either excreting the above mentioned products or integrating them into the natural metabolic process. Only a burst release of these products is to be considered a problem. A multitude of general tissue effects and responses from the Mg's degradation products is considered within this review, which is not targeting specific implant classes. Furthermore, common alloying elements of magnesium and their hazardous potential in vivo are taken into account. © 2013 Wiley Periodicals, Inc.

  9. Magnetic Susceptibility depending on the Thermal Degradation of HK-40 Steel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jeong Min; Park, Jong Seo; Nahm, Seung Hoon [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of); Son, De Rac [Hannam University, Daejeon (Korea, Republic of); Kim, Dong Gyun [Kyungpook National University, Daegu (Korea, Republic of); Han, Sang In; Choi, Song Chun [Korea Gas Safety Corporation, Siheung (Korea, Republic of); Ryu, Dae Hyun [Hansei University, Gunpo (Korea, Republic of)

    2004-02-15

    Since the used materials of furnace heater tube with different kinds of thermal degradation were not commonly available, the HK-40 steel specimens were heat-treated isothermally at elevated temperature to simulate the microstructure at the service temperature. HK-40 steel specimens with five different aging time were prepared by isothermal heat treatment at 1050 .deg. C . The characteristics of the magnetic susceptibility have been investigated for the degradation evaluation of HK-40 steel. The magnetic susceptibility at room temperature increases as the extent of degradation of the materials increases. The variation of magnetic susceptibility was compared with the variation of tensile properties and Vickers hardness. To investigate the effect of the microsturctural change on the characteristics of tensile properties, hardness and magnetic susceptibility, the microstructures were examined by a scanning electron microscope(SEM) and the chemical compositions were analyzed by a energy spectrometer of SEM. As a result, the magnetic susceptibility method can be suggested as one of the nondestructive evaluation methods for the degradation of the HK-40 steel

  10. Study of Curing Kinetics and Thermal Degradation of UV Curable Epoxy Acrylate Resin

    Directory of Open Access Journals (Sweden)

    Amrita Sharma

    2008-01-01

    Full Text Available Blends of epoxy acrylate resins (acid values 3, 6.5 & 10 mg KOH/gm Solid with monofunctional monomers (ethoxylated phenol monoacrylate were prepared by physical mixing, having weight ratio 50:50. These blends were cured by using UV radiations in presence of photo initiator (Darocure 1173. The thermal degradation kinetics of these resin blends were studied, using thermo gravimetric analysis in nitrogen atmosphere at a heating rate of 10°C/min. by applying Coats-Red fern equation. According to the analysis, all the coating films degrade in two steps. In the first step of degradation kinetics, R2M follows 1.75 order (n=1.75 and all other coating films follow second order (n=2 kinetics. In second step, R2M & R3M follow half order (n=0.5 kinetics and R1M follow first order (n=1 degradation kinetics. Order of the reaction is obtained on the basis of best fit analysis, and all the parameters were confirmed by regression analysis. From the reaction order, value of activation energy (E and pre exponential factor (Z were calculated by the slop and intercept of the plot between X and Y, respectively.

  11. Enzymatic degradation of plutonium-contaminated cellulose products

    Energy Technology Data Exchange (ETDEWEB)

    Heintz, C.E.; Rainwater, K.A.; Swift, L.M. [Texas Tech Univ., Lubbock, TX (United States); Barnes, D.L. [Amarillo National Resource Center for Plutonium, TX (United States); Worl, L.; Avens, L. [Los Alamos National Lab., NM (United States)

    1999-03-01

    Enzyme solutions produced for commercial purposes unrelated to waste management have the potential for reducing the volume of wastes in streams containing cellulose, lipid and protein materials. For example, the authors have shown that cellulases used in denim production and in detergent formulations are able to digest cellulose-containing sorbents and other cellulose-based wastes contaminated either with crude oil or with radionuclides. This presentation describes the use of one such enzyme preparation (Rapidase{trademark}) for the degradation of cotton sorbents intentionally contaminated with low levels of plutonium. This is part of a feasibility study to determine if such treatments have a role in reducing the volume of low level and transuranic wastes to minimize the amount of radionuclide-contaminated waste that must be disposed of in secured storage areas.

  12. Enzymatic degradation of plutonium-contaminated cellulose products

    Energy Technology Data Exchange (ETDEWEB)

    Heintz, C.E.; Rainwater, K.A.; Swift, L.M. [Texas Tech Univ., Lubbock, TX (United States); Barnes, D.L. [Amarillo National Resource Center for Plutonium, TX (United States); Worl, L.A. [Los Alamos National Lab., NM (United States)

    1999-06-01

    Enzyme solutions produced for commercial purposes unrelated to waste management have the potential for reducing the volume of wastes in streams containing cellulose, lipid and protein materials. For example, the authors have shown previously that cellulases used in denim production and in detergent formulations are able to digest cellulose-containing sorbents and other cellulose-based wastes contaminated either with crude oil or with uranium. This presentation describes the use of one such enzyme preparation (Rapidase{trademark}, manufactured by Genencor, Rochester, NY) for the degradation of cotton sorbents intentionally contaminated with low levels of plutonium. This is part of a feasibility study to determine if such treatments have a role in reducing the volume of low level and transuranic wastes to minimize the amount of radionuclide-contaminated waste destined for costly disposal options.

  13. Effect of Azo Dyes on the Thermal Degradation of Post-consumer Polyester Fabrics

    Directory of Open Access Journals (Sweden)

    Qin Dan

    2016-01-01

    Full Text Available Thermogravimetric analysis(TGA and pyrolysis gas chromatography mass spectrometry (Py-GC-MS investigations were carried out on the thermal degradation of white and red post-consumer polyester fabrics. The results show that red PET fabrics which was dyed with C.I. Disperse red 167 for its typical azo structure exhibits larger activation energy compared with white PET. The addition of azo dyes displays an inhibiting effect on the deep pyrolysis and the formation of biphenyl and bis(2-hydroxybutyl terephthalate produced by the free radical mechanism.

  14. Effect of Thermal Degradation on High Temperature Ultrasonic Transducer Performance in Small Modular Reactors

    Science.gov (United States)

    Bilgunde, Prathamesh N.; Bond, Leonard J.

    Prototype ultrasonic NDT transducers for use in immersion in coolants for small modular reactors have shown low signal to noise ratio. The reasons for the limitations in performance at high temperature are under investigation, and include changes in component properties. This current work seeks to quantify the issue of thermal expansion and degradation of the piezoelectric material in a transducer using a finite element method. The computational model represents an experimental set up for an ultrasonic transducer in a pulse-echo mode immersed in a liquid sodium coolant. Effect on transmitted and received ultrasonic signal due to elevated temperature (∼200oC) has been analysed.

  15. Hydrogen production: two stage processes for waste degradation.

    Science.gov (United States)

    Gómez, X; Fernández, C; Fierro, J; Sánchez, M E; Escapa, A; Morán, A

    2011-09-01

    The dark fermentation process generates hydrogen by biological means. It presents two main advantages: fulfilling requirements for mild operational conditions and gaining benefit from the residual biomass. The process itself may be seen as a pre-treatment step in a complete stabilisation chain, with the aim of attaining the valorisation of residual biomass. However, increasing the yield of H2 production is an imperative task. In this manuscript, a review of recent work in the field of fermentative hydrogen production is presented. As dark fermentation has a maximum yield of 33% (on sugars), a description is also presented of possible second stage processes for the degradation of dark fermentation effluents. Alternatives considered were photofermentation and bioelectrochemical systems (BES) as processes capable of converting fermentation sub-products into H2. Anaerobic digestion as a final stabilisation stage was also considered owing to the wide application of this technology in the treatment of bio-wastes. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Tracking thermal degradation on passion fruit juice through Nuclear Magnetic Resonance and chemometrics.

    Science.gov (United States)

    Soares, Marcia Valeria L; Alves Filho, Elenilson G; Silva, Lorena Mara A; Novotny, Etelvino Henrique; Canuto, Kirley Marques; Wurlitzer, Nedio Jair; Narain, Narendra; de Brito, Edy Sousa

    2017-03-15

    Thermal food processing mainly aims to control microorganism in order to extend its shelf life. However, it may induce chemical and nutritional changes in foodstuff. The Nuclear Magnetic Resonance (NMR) coupled to multivariate analysis was used to evaluate the effect of different thermal processing conditions (85 and 140°C for 4; 15; 30; and 60s) on the passion fruit juice using an Armfield pasteurizer. Through this approach it was possible to identify the changes in the juice composition. The temperature and the time lead to a hydrolysis of the sucrose to glucose and fructose. Additionally, juice submitted to 140°C for 60s results in the degradation of the sucrose and the formation of 5-(hydroxymethyl)-2-furfural (HMF). Despite no novel chemical marker has been identified, the 1 H NMR chemometrics approach may contribute in the choice of the temperature and time to be employed in the juice processing. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. LC, MSn and LC–MS/MS studies for the characterization of degradation products of amlodipine

    Directory of Open Access Journals (Sweden)

    Ravi N. Tiwari

    2015-02-01

    Full Text Available In the present study, comprehensive stress testing of amlodipine (AM was carried out according to International Conference on Harmonization (ICH Q1A(R2 guideline. AM was subjected to acidic, neutral and alkaline hydrolysis, oxidation, photolysis and thermal stress conditions. The drug showed instability in acidic and alkaline conditions, while it remained stable to neutral, oxidative, light and thermal stress. A total of nine degradation products (DPs were formed from AM, which could be separated by the developed gradient LC method on a C18 column. The products formed under various stress conditions were investigated by LC–MS/MS analysis. The previously developed LC method was suitably modified for LC–MS/MS studies by replacing phosphate buffer with ammonium acetate buffer of the same concentration (pH 5.0. A complete fragmentation pathway of the drug was first established to characterize all the degradation products using LC–MS/MS and multi-stage mass (MSn fragmentation studies. The obtained mass values were used to study elemental compositions, and the total information helped with the identification of DPs, along with its degradation pathway. Keywords: Amlodipine, LC–MS/MS, Characterization, Degradation pathway

  18. Diesel degradation and biosurfactant production by Gram-positive ...

    African Journals Online (AJOL)

    All isolates were capable of degrading 70 - 80% of n-paraffin whilst isolates D2, D9, D10 and DJLB possessed better abilities of diesel degradation at 65.4 - 83.12% under the standard conditions. Diesel degradation rates and microbial cell number, increased with an increase in glucose composition. The addition of glucose ...

  19. Restoration of Degraded Salt Affected Lands to Productive Forest Ecosystem

    Science.gov (United States)

    Singh, Yash; Singh, Gurbachan; Singh, Bajrang; Cerdà, Artemi

    2017-04-01

    Soil system determines the fluxes of energy and matter in the Earth and is the source of goods, services and resources to the humankind (Keesstra et al., 2012; Brevik et al., 2015; Keesstra et al., 2016). To restore and rehabilitate the soil system is a key strategy to recover the services the soils offers (Celentano et al., 2016; Galati et al., 2016; Parras-Alcantara et al., 2016). Transformation of degraded sodic lands in biodiversity rich productive forest ecosystem is a challenging task before the researchers all over the world. The soils of the degraded sites remain almost unfavorable for the normal growth, development and multiplication of organisms; all our attempts tend to alleviate the soil constraints. Land degradation due to presence of salts in the soil is an alarming threat to agricultural productivity and sustainability, particularly in arid and semiarid regions of the world (Tanji, 1990; Qadir et al., 2006). According to the FAO Land and Nutrition Management Service (2008), over 6% of the world's lands are affected by salinity, which accounts for more than 800 million ha in 100 countries. This is due to natural causes, extensive utilization of land (Egamberdieva et al., 2008), poor drainage systems and limited availability of irrigation water which causes salinization in many irrigated soils (Town et al., 2008).In India, about 6.73 million ha are salt affected which spread in 194 districts out of 584 districts in India and represents 2.1% of the geographical area of the country (Mandal et al., 2009).Out of these, 2.8 million ha are sodic in nature and primarily occurring in the Indo-Gangetic alluvial plains. These lands are degraded in structural, chemical, nutritional, hydrological and microbiological characteristics. The reclamation of salt affected soils with chemical amendments like gypsum and phospho-gypsum are in practice for the cultivation field crops under agricultural production. Forest development on such lands although takes considerable

  20. Residual thermal stresses in injection moulded products

    NARCIS (Netherlands)

    Zoetelief, W.F.; Douven, L.F.A.; Ingen Housz, A.J.; Ingen housz, A.J.

    1996-01-01

    Nonisothermal flow of a polymer melt in a cold mold cavity introduces stresses that are partly frozen-in during solidification. Flow-induced stresses cause anisotropy of mechanical, thermal, and optical properties, while the residual thermal stresses induce warpage and stress-cracking. In this

  1. Thermal degradation kinetics of nylon6/GF/crysnano nanoclay nanocomposites by TGA

    Directory of Open Access Journals (Sweden)

    SHAHRYAR PASHAEI

    2011-06-01

    Full Text Available Nylon 6 is extensively used in engineering applications because of its unique characteristics such as low price, low viscosity, high toughness, shelf lubricating behaviour and high chemical resistance. Nanocomposites based on PA-6 were prepared by melt extrusion and an adjacent injection moulding process. Mechanical and thermomechanical properties have been investigated by tensile testing and dynamic mechanical analysis. To evaluate the potential of crysnano nanoclays as a new candidate in the class of nanofillers, the properties of the crysnano nanoclays nanocomposites has been compared to those of glass fiber. Thermal characteristics were performed using thermogravimetric analysis (TGA, differential scanning calorimetry (DSC and dynamic mechanical analysis (DMA. With increase in filler loading, the enthalpy of melting (Hm obtained from DSC curves was reduced as compared to pristine nylon 6. All the nanocompsoites were stable upto 205 °C. Degradation kinetic parameters have been calculated for thermal degradation processes using the composites using three mathematical models, namely Horowitz–Metzger, Coats–Redfern and Broido’s methods.

  2. Comparative Performance of Three Magnesium Compounds on Thermal Degradation Behavior of Red Gum Wood

    Directory of Open Access Journals (Sweden)

    Yiqiang Wu

    2014-01-01

    Full Text Available The effect of basic magnesium carbonate (BMC, magnesium hydroxide (MH, and magnesium chloride hydrate (MCH on thermal degradation of red gum wood was studied using cone calorimetry, Thermogravimetric-differential scanning calorimetry (TG-DSC analysis, and X-ray diffraction (XRD characterization. The results showed common fire retardation actions of the three compounds by releasing incombustible gas and/or water vapor to dilute combustible gas in the flaming zone, and by converting to MgO, which had a satisfactory protective wall effect on the wood. Individually, BMC absorbed heat from the wood at the pre-decomposition stage and, thus, slowed down wood pyrolysis process. It slightly increased the char yield by charring in both the charring stage and the char calcination stage. MH lost water at about 270 °C, close to the temperature at which wood thermally degraded. MH rendered wood char quickly, and the compact char layer impeded further carbonization and burning of inner wood. MCH promoted charring with Mg2+ as a Lewis acid, and increased wood char yield. MCH also released Cl· free radical and HCl at 167 °C, which easily coordinated with combustion reaction radical, and slowed down, even inhibited, the combustion chain reaction.

  3. FUV quantum efficiency degradation of cesium iodide photocathodes caused by exposure to thermal atomic oxygen

    Science.gov (United States)

    McPhate, Jason; Anne, Joshi; Bacinski, John; Banks, Bruce; Cates, Carey; Christensen, Paul; Cruden, Brett; Dunham, Larry; Graham, Eric; Hughes, David; Kimble, Randy; Lupie, Olivia; Niedner, Malcolm; Osterman, Steven; Penton, Steven; Proffitt, Charles; Pugel, Diane; Siegmund, Oswald; Wheeler, Thomas

    2011-09-01

    The color dependence of the measured decline of the on-orbit sensitivity of the FUV channel of the HST Cosmic Origins Spectrograph (HST-COS) indicated the principal loss mechanism to be degradation of the cesium iodide (CsI) photocathode of the open-faced FUV detector. A possible cause of this degradation is contamination by atomic oxygen (AO), prompting an investigation of the interaction of AO with CsI. To address this question, opaque CsI photocathodes were deposited on stainless steel substrates employing the same deposition techniques and parameters used for the photocathodes of the HST-COS FUV detector. The as-deposited FUV quantum efficiency of these photocathodes was measured in the 117-174 nm range. Several of the photocathodes were exposed to varying levels of thermalized, atomic oxygen (AO) fluence (produced via an RF plasma). The post AO exposure QE's were measured and the degradation of sensitivity versus wavelength and AO fluence are presented.

  4. Degradation of palm oil refinery wastewaters by non-thermal gliding arc discharge at atmospheric pressure.

    Science.gov (United States)

    Mountapmbeme-Kouotou, P; Laminsi, S; Acayanka, E; Brisset, J-L

    2013-07-01

    The gliding electric discharge in humid air is a source of activated species forming (e.g. (•)OH, (•)NO and their derivatives H2O2, ONO2H and NO3H) which are present in a non-thermal plasma at atmospheric pressure. These species are able to degrade organic pollutants in palm oil refinery wastewaters (PORW). The increase in acidity (pH decrease), conductivity and total dissolved solids (TDS) and the decrease in the total organic carbon (TOC) of PORW samples exposed to the discharge are reported. More than 50% TOC abatement is obtained for 15 min treatment in batch conditions with a laboratory reactor. The organic pollutants of PORW, i.e. mainly fatty acids are degraded according to a pseudo first-order reaction (k* = 0.06 min(-1)). Post discharge reactions are also observed after having switched off the discharge, which suggests that the pseudo first-order (k ≈ 0.05 min(-1)) degradation reactions should be attributed to the diffusion of soluble reactive species, e.g. H2O2 and ONOOH in the liquid target.

  5. Identification of degradation products of 2-chloroethyl ethyl sulfide by gas chromatography-mass spectrometry.

    Science.gov (United States)

    Rohrbaugh, D K; Yang, Y C; Ward, J R

    1988-08-05

    Gas chromatography-mass spectrometry under both electron impact and methane chemical ionization conditions has been used to detect impurities and degradation products present in the mustard simulant 2-chloroethyl ethyl sulfide, with a detection limit of 0.05 area percent. After one and two years of storage at ambient temperatures, the primary degradation product was 1,4-dithiane formed from the degradation of dimeric sulfonium ions. Oxidation and hydrolysis products were not detected.

  6. An evaluation of the global potential of bioenergy production on degraded lands

    NARCIS (Netherlands)

    Nijsen, M.; Smeets, E.M.W.; Stehfest, E.; Vuuren, van D.P.

    2012-01-01

    In this article the global potential of energy crop production on degraded lands was estimated using detailed, spatially explicit data about the area, type and extent of degradation derived from the Global Assessment of Land Degradation Dataset, and by combining this dataset with various spatially

  7. An evaluation of the global potential of bioenergy production on degraded lands

    NARCIS (Netherlands)

    Nijsen, M.; Smeets, E.; Stehfest, E.; Vuuren, D.P. van

    2012-01-01

    this article the global potential of energy crop production on degraded lands was estimated using detailed, spatially explicit data about the area, type and extent of degradation derived from the Global Assessment of Land Degradation Dataset, and by combining this dataset with various spatially

  8. Thermal degradation kinetics and estimation of lifetime of radiation grafted polypropylene films

    Science.gov (United States)

    Mandal, Dev K.; Bhunia, Haripada; Bajpai, Pramod K.; Bhalla, Vinod Kumar

    2017-07-01

    In this research work, thermal stability and degradation behavior of acrylic acid grafted polypropylene (PP-g-PAAc) films were investigated by using thermogravimetric (TGA) analysis at four different heating rates 5, 10, 15 and 20 °C/min over a temperature range of 40-550 °C in nitrogen atmosphere. The kinetic parameters namely activation energy (Ea), reaction order (n) and frequency factor (Z) were calculated by three multiple heating rate methods. The thermal stability of PP-g-PAAc films is found to decrease with increase in degree of grafting. The TGA data and thermal kinetic parameters were also used to predict the lifetime of grafted PP films. The estimated lifetime of neat PP as well as grafted PP decreased with increase in temperature by all the three methods. Studies also indicated that Ea and lifetime of PP-g-PAAc films decreased with increase in degree of grafting, which may also be helpful in biodegradation of grafted PP films.

  9. Forced degradation study of racecadotril: Effect of co-solvent, characterization of degradation products by UHPLC-Q-TOF-MS/MS, NMR and cytotoxicity assay.

    Science.gov (United States)

    Chiguru, Vishnuvardhan; Lingesh, Allakonda; R, Srinivas; N, Satheeshkumar

    2016-09-05

    Racecadotril, an enkephalinase inhibitor, was subjected to hydrolysis (acidic and alkaline), oxidation, photolysis and thermal stress, as per ICH specified conditions. The drug showed extensive degradation under acidic, basic hydrolysis and oxidative stress conditions whereas, it was stable under other stress conditions. A total of seven degradation products (DPs) were observed. The chromatographic separation was optimized on Acquity HSS Cyano (100×2.1mm, 1.8μ) column using 0.1% formic acid and acetonitrile as mobile phase in gradient mode. Six DPs were characterised by LC-MS/MS and DP1 by GC-MS. The major DPs (DP 2 and DP 5) were isolated and characterised by NMR. This is a typical case of degradation where co solvent methanol reacts with racecadotril leading to the formation of pseudo DPs, DP 6 and DP 5. Interestingly the MS/MS spectra of protonated drug, DP 4 and DP 7 showed product ions which were formed due to intramolecular benzyl migrations. In vitro cytotoxic activity studies on isolated DP 2 and DP 5 revealed that the former has no cytotoxic nature, whereas the latter has potential pulmonary and hepatic toxicity. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Implications of Steam Generator Fouling on the Degradation of Material and Thermal Performance

    Science.gov (United States)

    Turner, Carl W.

    Fouling of steam generators has a significant negative impact on the material and thermal performance the steam generators of pressurized water reactors. Corrosion products that originate from various components in the steam cycle of a nuclear power plant get pumped forward with the feed water to steam generators where they deposit on the tube bundle, tube support structure and the tube sheet. Heavy accumulation of deposit within the steam generator has led to some serious operational problems, including loss of thermal performance, under deposit corrosion, steam generator level oscillations, flow accelerated corrosion of carbon steel tube support plates and the failure of steam generator tubes due to high cycle fatigue.

  11. Mapping intermediate degradation products of poly(lactic-co-glycolic acid) in vitro.

    Science.gov (United States)

    Li, Jian; Nemes, Peter; Guo, Ji

    2017-05-17

    There is widespread interest in using absorbable polymers, such as poly(lactic-co-glycolic acid) (PLGA), as components in the design and manufacture of new-generation drug eluting stents (DES). PLGA undergoes hydrolysis to progressively degrade through intermediate chemical entities to simple organic acids that are ultimately absorbed by the human body. Understanding the composition and structure of these intermediate degradation products is critical not only to elucidate polymer degradation pathways accurately, but also to assess the safety and performance of absorbable cardiovascular implants. However, analytical approaches to determining the intermediate degradation products have yet to be established and evaluated in a standard or regulatory setting. Hence, we developed a methodology using electrospray ionization mass spectrometry to qualitatively and quantitatively describe intermediate degradation products generated in vitro from two PLGA formulations commonly used in DES. Furthermore, we assessed the temporal evolution of these degradation products using time-lapse experiments. Our data demonstrated that PLGA degradation products via heterogeneous cleavage of ester bonds are modulated by multiple intrinsic and environmental factors, including polymer chemical composition, degradants solubility in water, and polymer synthesis process. We anticipate the methodologies and outcomes presented in this work will elevate the mechanistic understanding of comprehensive degradation profiles of absorbable polymeric devices, and facilitate the design and regulation of cardiovascular implants by supporting the assessments of the associated biological response to degradation products. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2017. © 2017 Wiley Periodicals, Inc.

  12. Quantitative measurement of productivity loss due to thermal discomfort

    DEFF Research Database (Denmark)

    Lan, Li; Wargocki, Pawel; Lian, Zhiwei

    2011-01-01

    The effects on human performance of elevated temperature causing thermal discomfort were investigated. Recruited subjects performed neurobehavioural tests examining different component skills, and addition and typing tasks that were used to replicate office work. The results show that thermal...... discomfort caused by elevated air temperature had a negative effect on performance. A quantitative relationship was established between thermal sensation votes and task performance. It can be used for economic calculations pertaining to building design and operation when occupant productivity is considered...

  13. Assessing the impact of soil degradation on food production

    NARCIS (Netherlands)

    Bindraban, P.S.; Velde, van der M.; Ye, L.; Berg, van den M.; Materechera, S.; Kiba, D.I.; Tamene, L.; Ragnarsdottir, K.V.; Jongschaap, R.E.E.; Hoogmoed, M.; Hoogmoed, W.B.; Beek, C.L.; Lynden, van G.W.J.

    2012-01-01

    Continuing soil degradation remains a serious threat to future food security. Yet, global soil degradation assessments are based on qualitative expert judgments or remotely sensed quantitative proxy values that suffice to raise awareness but are too coarse to identify appropriate sustainable land

  14. Isolation, Characterization of a Potential Degradation Product of Aspirin and an HPLC Method for Quantitative Estimation of Its Impurities.

    Science.gov (United States)

    Acharya, Subasranjan; Daniel, Alex; Gyadangi, Bharath; Ramsamy, Sriramulu

    2015-10-01

    In this work, a new degradation product of Aspirin was isolated, characterized and analyzed along with other impurities. New unknown degradation product referred as UP was observed exceeding the limit of ICH Q3B identification thresholds in the stability study of Aspirin and Dipyridamole capsule. The UP isolated from the thermal degradation sample was further studied by IR, Mass and (1)H NMR spectrometry, revealing structural similarities with the parent molecule. Finally, UP was identified as a new compound generated from the interaction of Aspirin and Salicylic acid to form a dehydrated product. A specific HPLC method was developed and validated for the analysis of UP and other Aspirin impurities (A, B, C, E and other unknown degradation products). The proposed method was successfully employed for estimation of Aspirin impurities in a pharmaceutical preparation of Aspirin (Immediate Release) and Dipyridamole (Extended Release) Capsules. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Photocatalytic degradation of tetracycline by Ti-MCM-41 prepared at room temperature and biotoxicity of degradation products

    Science.gov (United States)

    Zhou, Kefu; Xie, Xiao-Dan; Chang, Chang-Tang

    2017-09-01

    Ti-doped MCM-41 with different Si/Ti molar ratios was prepared at room temperature to degrade tetracycline antibiotics in aqueous solution. The Ti was doped into the skeleton structure of MCM-41. The photocatalytic activity of Ti-doped MCM-41 was investigated. The optimal catalyst had Si/Ti molar ratio of 25 and over 99% removal of oxytetracycline in 150 min, and the removal could maintain 98% after 5 reuses. Ions and soluble organic matters in natural water affected the degradation reaction when Ti-doped MCM-41 was used to treat simulated wastewater of chicken farms. The degradation products of oxytetracycline, tetracycline and chlortetracycline were detected by Escherichia coli DH5α and HPLC-MS/MS. No intermediate product with higher toxicity was detected.

  16. Natural degradation of roxarsone in contrasting soils: Degradation kinetics and transformation products.

    Science.gov (United States)

    Fu, Qing-Long; Blaney, Lee; Zhou, Dong-Mei

    2017-12-31

    Roxarsone (ROX) is transformed to more toxic arsenicals after land application of ROX-containing poultry litter to agricultural soils. To date, no reports have compared ROX degradation in soils with contrasting properties. In this study, the impact of different incubation conditions on ROX degradation was investigated in red (C-Soil) and yellow-brown (H-Soil) soils. The degradation half-lives of extractable ROX in C-Soil and H-Soil were found to be 130-394d and 4-94d, respectively, indicating that the extractable ROX degraded faster in H-Soil. This result stems from the higher organic matter content, more abundant soil microbes, and lower ROX sorption capacity of H-Soil compared to C-Soil. Degradation of extractable ROX in both C-Soil and H-Soil was significantly promoted by soil moisture and exogenous glucose. Exogenous P(V) facilitated degradation of extractable ROX in C-Soil, but limited effects were observed for H-Soil. HPLC-ICP-MS analysis confirmed that ROX and dimethylarsinic acid were the predominant As species in soil extracts from 119-day incubated C-Soil and H-Soil, respectively. Ultimately, minimal transformation of extractable ROX was observed in C-Soil, but the majority of extractable ROX in H-Soil was biologically transformed. The differences in degradation of extractable ROX in C-Soil and H-Soil highlight the key roles of soil properties on the environmental fate of ROX and associated arsenicals. Results from this study inform the need for comprehensive evaluation of the ecological risks in organoarsenical-contaminated soils. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Thermal stability and degradation kinetics of polyphenols and polyphenylenediamines enzymatically synthesized by horseradish peroxidase

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hansol; Ryu, Keungarp [University of Ulsan, Ulsan (Korea, Republic of); Kwon, Oyul [Seoul National University of Science and Technology, Seoul (Korea, Republic of)

    2015-09-15

    Various substituted phenols and phenylenediamines were enzymatically polymerized by horseradish peroxidase in 80% (v/v) organic solvents-aqueous buffer (100 mM sodium acetate, pH 5) mixtures with H{sub 2}O{sub 2} as the oxidant. The thermal stability of the polymers was investigated by thermogravimetric analysis (TGA) and represented by the char yield (wt% of the initial polymer mass) after being heated at 800 .deg. C. Poly(p-phenylphenol) had the highest thermal stability among the synthesized polymers with a char yield of 47 wt%. The polymers containing amino groups such as poly(p-aminophenol) and polyphenylenediamines were also shown to possess high thermal stabilities. The activation energies for the thermal degradation of the polymers determined by derivative thermogravimetric analysis (DTG) using Horowitz-Metzger's pseudo-first-order kinetics were in the range between 23-65 kJ/mol and comparable to those of the chemically synthesized polymers. Dynamic structural changes of the enzymatically synthesized polymers upon heating were studied by differential scanning calorimetry (DSC). The DSC curves of poly(p-phenylphenol) showed a broad exothermic peaks between 150-250 .deg. C, indicating that the polymer undergoes complex structural transitions in the temperature range. On the other hand, the DSC curves of the poly(p-aminophenol) and the poly(p-phenylenediamine) which contain amino groups showed strong sharp endothermic peaks near 150 .deg. C, implying that these polymers possess homogeneous oriented structures which undergo a concerted structural disintegration upon heating.

  18. Determination of degradation products and process related impurities of asenapine maleate in asenapine sublingual tablets by UPLC

    Science.gov (United States)

    Kumar, Nitin; Sangeetha, D.; Kalyanraman, L.

    2017-11-01

    For determination of process related impurities and degradation products of asenapine maleate in asenapine sublingual Tablets, a reversed phase, stability indicating UPLC method was developed. Acetonitrile, methanol and potassium dihydrogen phosphate buffer with tetra-n- butyl ammonium hydrogen sulphate as ion pair (pH 2.2; 0.01 M) at flow rate of 0.2 ml/min were used in gradient elution mode. Separation was achieved by using acquity BEH Shield RP18 column (1.7 μm, 2.1 mm×100 mm) at 35 ºC. UV detection was performed at 228 nm. Subsequently the liquid chromatography method was validated as per ICH. The drug product was exposed to the stress conditions of acid hydrolysis, base hydrolysis, water hydrolysis, oxidative, thermal, and photolytic. In oxidative stress and thermal stress significant degradation was observed. All the degradation products were well separated from analyte peak and its impurities. Stability indicating nature of the method was proved by demonstrating the peak purity of Asenapine peak in all the stressed samples. The mass balance was found >95% for all the stress conditions. Based on method validation, the method was found specific, linear, accurate, precise, rugged and robust.

  19. Large-scale bioreactor production of the herbicide-degrading Aminobacter sp. strain MSH1

    DEFF Research Database (Denmark)

    Schultz-Jensen, Nadja; Knudsen, Berith Elkær; Frkova, Zuzana

    2014-01-01

    The Aminobacter sp. strain MSH1 has potential for pesticide bioremediation because it degrades the herbicide metabolite 2,6-dichlorobenzamide (BAM). Production of the BAM-degrading bacterium using aerobic bioreactor fermentation was investigated. A mineral salt medium limited for carbon and with ......, large-scale production of herbicide-degrading Aminobacter was possible, bringing the use of this bacterium in bioaugmentation field remediation closer to reality....

  20. Effect of demineralization on the physiochemical structure and thermal degradation of acid treated indigenous rice husk

    Directory of Open Access Journals (Sweden)

    Aslam Umair

    2016-09-01

    Full Text Available Energy generation from biomass presents some serious problems like slagging, fouling and corrosion of boilers. To address these problems, demineralization of biomass is performed using different leaching agents. This study is focused on determining the influence of leaching agents and leaching time on the physiochemical structure of rice husk during demineralization. Dilute (5% wt solutions of HCl and H2SO4 were used for the demineralization of rice husk separately with leaching time of 15, 60 and 120 minutes. It is shown that H2SO4 exhibited higher removal of alkali and alkaline earth metals (AAEM comparatively as depicted by the 34.2% decrease in ash content along with an increase of 7.10% in the heating value. The acid has been seen to induce more notable changes in physiochemical structure as depicted by the FTIR spectra and SEM micrographs. The thermal degradation behavior of the demineralized rice husk has also been reported.

  1. Kinetics of the Thermal Degradation of Granulated Scrap Tyres: a Model-free Analysis

    Directory of Open Access Journals (Sweden)

    Félix A. LÓPEZ

    2013-12-01

    Full Text Available Pyrolysis is a technology with a promising future in the recycling of scrap tyres. This paper determines the thermal decomposition behaviour and kinetics of granulated scrap tyres (GST by examining the thermogravimetric/derivative thermogravimetric (TGA/DTG data obtained during their pyrolysis in an inert atmosphere at different heating rates. The model-free methods of Friedman, Flynn-Wall-Ozawa and Coats-Redfern were used to determine the reaction kinetics from the DTG data. The apparent activation energy and pre-exponential factor for the degradation of GST were calculated. A comparison with the results obtained by other authors was made.DOI: http://dx.doi.org/10.5755/j01.ms.19.4.2947

  2. Structure, wettability and thermal degradation of new fluoro-oligomer modified nanoclays.

    Science.gov (United States)

    Valsecchi, R; Viganò, M; Levi, M; Turri, S

    2008-04-01

    Quaternary ammonium salts based on monofunctionalized Perfluoropolyether (PFPE) oligomers were synthesized and used for the cation exchange process of sodium Montmorillonite nanoclays. The new fluoromodified nanoclays were characterized through X-rays diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), termogravimetric analysis (TGA), differential scanning calorimetry (DSC), electronic microscopy (SEM-EDS), and contact angle measurements (CA). In particular XRD showed rather complex patterns (presence of higher order reflections) which allowed the calculation of basal spacings, regularly increasing with the molecular weight of the fluorinated macrocation. Both IR and SEM confirmed the presence of fluorinated segments at clays interface, while TGA showed a limited thermal stability with an onset of degradation temperature which seems not dependent on the molecular weight of the macrocation. CA measurements showed a peculiar behaviour, with evident dynamic hysteresis phenomena and surface tension components quite different from those of commercially available, organomodified clays.

  3. Recovery of thermal-degraded ZnO photodetector by embedding nano silver oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Zhan-Shuo [Institute of Microelectronics, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China); Hung, Fei-Yi, E-mail: fyhung@mail.ncku.edu.tw [Institute of Nanotechnology and Microsystems Engineering, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China); Chen, Kuan-Jen [Institute of Nanotechnology and Microsystems Engineering, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China); The Instrument Center, National Cheng Kung University, Tainan 701, Taiwan (China); Chang, Shoou-Jinn [Institute of Microelectronics, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China); Institute of Microelectronics and Department of Electrical Engineering, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China); Hsieh, Wei-Kang; Liao, Tsai-Yu; Chen, Tse-Pu [Institute of Microelectronics, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan 701, Taiwan (China)

    2013-08-15

    The degraded performance of annealed ZnO-based photodetector can be recovered by embedding Ag{sub 2}O nanoparticles resulted from the transformation of as-deposited Ag layer. After thermal treatment, the electrons were attracted at the interface between ZnO and Ag{sub 2}O. The excess Ag{sup +} ions form the cluster to incorporate into the interstitial sites of ZnO lattice to create a larger amount of lattice defects for the leakage path. The photo-current of ZnO film with Ag{sub 2}O nanoparticles is less than annealed ZnO film because the photo-induced electrons would flow into Ag{sub 2}O side. ZnO photodetector with the appropriate Ag{sub 2}O nanoparticles possesses the best rejection ratio.

  4. Degradation of organic compounds and production of activated species in Dielectric Barrier Discharges and Glidarc reactors

    CERN Document Server

    Cormier, Jean Marie; Khacef, Ahmed

    2008-01-01

    Major sterilization mechanisms are related to atoms and radicals, charged parti-cles, excited molecules, ozone, and UV radiation. The ROS (Reactive Oxygen Species) are well known as evildoers. These species are easily created in ambient air and water and they live long enough to reach the cell and attack the organic matter. Test molecules conversion in dry and wet air is studied using Dielectric Barrier Discharge (DBD) and Gliding Arc Reactors (GAR). The effects of tem-perature and energy deposition into the media on the active species production and then on the organic compounds degradation are presented for two non thermal plasma reactors: DBD and GAR. Main production species investigated are OH, O3, NOx, CO and CxHyOz by-products. It is shown from experiment analysis that the reactive species production is quite different from one reactor to another. GAR and pulsed DBD are two chemical processing ways in which the temperature of heavy species in ionized gas is determinant. By reviewing the species producti...

  5. Pyrite-enhanced methylene blue degradation in non-thermal plasma water treatment reactor

    Energy Technology Data Exchange (ETDEWEB)

    Benetoli, Luis Otavio de Brito, E-mail: luskywalcker@yahoo.com.br [Departamento de Quimica, Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil); Cadorin, Bruno Mena; Baldissarelli, Vanessa Zanon [Departamento de Quimica, Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil); Geremias, Reginaldo [Departamento de Ciencias Rurais, Universidade Federal de Santa Catarina (UFSC), Curitibanos, SC (Brazil); Goncalvez de Souza, Ivan [Departamento de Quimica, Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil); Debacher, Nito Angelo, E-mail: debacher@qmc.ufsc.br [Departamento de Quimica, Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

    2012-10-30

    Highlights: Black-Right-Pointing-Pointer We use O{sub 2} as the feed gas and pyrite was added to the non-thermal plasma reactor. Black-Right-Pointing-Pointer The methylene blue removal by NTP increased in the presence of pyrite. Black-Right-Pointing-Pointer The total organic carbon content decreased substantially. Black-Right-Pointing-Pointer The acute toxicity test showed that the treated solution is not toxic. Black-Right-Pointing-Pointer The dye degradation occurs via electron impact as well as successive hydroxylation. - Abstract: In this study, methylene blue (MB) removal from an aqueous phase by electrical discharge non-thermal plasma (NTP) over water was investigated using three different feed gases: N{sub 2}, Ar, and O{sub 2}. The results showed that the dye removal rate was not strongly dependent on the feed gas when the electrical current was kept the same for all gases. The hydrogen peroxide generation in the water varied according to the feed gas (N{sub 2} < Ar < O{sub 2}). Using O{sub 2} as the feed gas, pyrite was added to the reactor in acid medium resulting in an accentuated increase in the dye removal, which suggests that pyrite acts as a Fenton-like catalyst. The total organic carbon (TOC) content of the dye solution decreased slightly as the plasma treatment time increased, but in the presence of the pyrite catalyst the TOC removal increased substantially. The acute toxicity test using Artemia sp. microcrustaceans showed that the treated solution is not toxic when Ar, O{sub 2} or O{sub 2}-pyrite is employed. Electrospray ionization mass spectrometry analysis (ESI-MS) of the treated samples indicated that the dye degradation occurs via high energy electron impact as well as successive hydroxylation in the benzene rings of the dye molecules.

  6. Fibrin Degradation Products in Sera of Women with Normal Menstruation and Menorrhagia

    Science.gov (United States)

    Basu, Himansu K.

    1970-01-01

    Serum concentrations of fibrin degradation products were found to be higher during menstruation than in the intermenstrual phase. Higher concentrations were present in cases of menorrhagia as compared with healthy women and women with various gynaecological disorders but with normal menstrual function. Higher serum concentrations of fibrin degradation products in cases of menorrhagia may indicate increased local fibrinolytic activity in the uterus. PMID:5411448

  7. Degradation in Thermal Properties and Morphology of Polyetheretherketone-Alumina Composites Exposed to Gamma Radiation

    Science.gov (United States)

    Lawrence, Falix; Mishra, Satyabrata; Mallika, C.; Kamachi Mudali, U.; Natarajan, R.; Ponraju, D.; Seshadri, S. K.; Sampath Kumar, T. S.

    2012-07-01

    Sheets of polyetheretherketone (PEEK) and PEEK-alumina composites with micron-sized alumina powder with 5, 10, 15, 20, and 25% by weight were fabricated, irradiated with gamma rays up to 10 MGy and the degradation in their thermal properties and morphology were evaluated. The radicals generated during irradiation get stabilized by chain scission and crosslinking. Chain scission is predominant on the surface and crosslinking is predominant in the bulk of the samples. Owing to radiation damage, the glass transition temperature, T g increased for pure PEEK from 136 to 140.5 °C, whereas the shift in T g for the composites decreased with increase in alumina content and for PEEK-25% alumina, the change in T g was insignificant, as alumina acts as an excitation energy sink and reduces the crosslinking density, which in turn decreased the shift in T g towards higher temperature. Similarly, the melting temperature, T m and enthalpy of melting, Δ H m of PEEK and PEEK-alumina composites decreased on account of radiation owing to the restriction of chain mobility and disordering of structures caused by crosslinks. The decrease in T m and Δ H m was more pronounced in pure PEEK and the extent of decrease in T m and Δ H m was less for composites. SEM images revealed the formation of micro-cracks and micro-pores in PEEK due to radiation. The SEM image of irradiated PEEK-alumina (25%) composite showed negligible micro-cracks and micro-pores, because of the reinforcing effect of high alumina content in the PEEK matrix which helps in reducing the degradation in the properties of the polymer. Though alumina reduces the degradation of the polymer matrix during irradiation, an optimum level of ceramic fillers only have to be loaded to the polymer to avoid the reduction in toughness.

  8. Thermal/chemical degradation of ceramic candle filter materials. Final report, September 1988--October 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    High-temperature ceramic candle filters are being developed for use in advanced power generation systems such as the Integrated Gasification Combined Cycle (IGCC), Pressurized Fluidized-Bed Combustor (PFBC), and Direct Coal-Fired Turbine (DCFT). The direct firing of coal produces particulate matter which must be removed to meet both environmental and process limitations. The ceramic candles increase the efficiency of the advanced power generation systems and protect downstream equipment from erosion and impingement of particulate matter in the hot exhaust gases. Ceramic candle filters are rigid, closed-ended (capped on one side) porous cylinders which generally have a flange on the open-ended side. The flange at the open end allows the candle to be suspended by a tubesheet in the filter vessel. Candle filters have shown promise, but have also encountered durability problems during use in hostile, high-temperature environments. Limitations in the candle lifetime lower the economic advantages of using candle filters for this application. Candles typically fail by cracking at the flange or in the body of the candle. The objective of this project was to test and analyze ceramic candle filter materials and to evaluate the degradation mechanisms. The tests were conducted such that the effects of each degradation mechanism could be examined. Separately. The overall objective of the project was to: (a) develop a better understanding of the thermal and chemical degradation mechanisms of ceramic candle filter materials in advanced coal utilization projects, (b) develop test procedures, and (c) recommend changes to increase filter lifetime. 15 refs., 67 figs., 17 tabs.

  9. Mechanochemical degradation of tetrabromobisphenol A: Performance, products and pathway

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Kunlun; Huang, Jun; Zhang, Wang; Yu, Yunfei; Deng, Shubo [State Key Joint Laboratory of Environment Simulation and Pollution Control (SKLESPC), School of Environment, POPs Research Center, Tsinghua University, Beijing 100084 (China); Yu, Gang, E-mail: yg-den@tsinghua.edu.cn [State Key Joint Laboratory of Environment Simulation and Pollution Control (SKLESPC), School of Environment, POPs Research Center, Tsinghua University, Beijing 100084 (China)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Fe + SiO{sub 2} shows better performance than CaO in mechanochemical destruction of TBBPA. Black-Right-Pointing-Pointer Nonhazardous inorganic carbon and soluble bromide were the final products. Black-Right-Pointing-Pointer Raman and FTIR imply the generation of inorganic carbon and removal of bromine atom. Black-Right-Pointing-Pointer Tri-BBPA, bi-BBPA, mono-BBPA, BPA were the main intermediates during ball milling. Black-Right-Pointing-Pointer The bromine was balanced and the degradation pathway was proposed. - Abstract: Tetrabromobisphenol A (TBBPA) is the most widely used brominated flame retardant (BFR), which has received more and more concerns due to its high lipophilicity, persistency and endocrine disrupting property in the environment. Considering the possible need for the safe disposal of TBBPA containing wastes in the future, the potential of mechanochemical (MC) destruction as a promising non-combustion technology was investigated in this study. TBBPA was co-ground with calcium oxide (CaO) or the mixture of iron powder and quartz sand (Fe + SiO{sub 2}) in a planetary ball mill at room temperature. The method of Fe + SiO{sub 2} destructed over 98% of initial TBBPA after 3 h and acquired 95% debromination rate after 5 h, which showed a better performance than the CaO method. Raman spectra and Fourier transform infrared spectroscopy (FTIR) demonstrated the generation of inorganic carbon with the disappearance of benzene ring and C-Br bond, indicating the carbonization and debromination process during mechanochemical reaction. LC-MS-MS screening showed that the intermediates of the treatment with Fe + SiO{sub 2} were tri-, bi-, mono-brominated BPA, BPA and other fragments. Finally all the intermediates were also destroyed after 5 h grinding. The bromine balance was calculated and a possible reaction pathway was proposed.

  10. Evaluation of Ultrasonic and Thermal Nondestructive Evaluation for the Characterization of Aging Degradation in Braided Composite Materials

    Science.gov (United States)

    Martin, Richard E.

    2010-01-01

    This paper examines the ability of traditional nondestructive evaluation (NDE) techniques to measure the degradation of braided polymer composite materials subjected to thermal-humidity cycling to simulate aging. A series of braided composite coupons were examined using immersion ultrasonic and pulsed thermography techniques in the as received condition. These same specimens were then examined following extended thermal-humidity cycling. Results of this examination did not show a significant change in the resulting (NDE) signals.

  11. Stability-Indicating RP-HPLC Method for Simultaneous Estimation of Enrofloxacin and Its Degradation Products in Tablet Dosage Forms

    Directory of Open Access Journals (Sweden)

    V. Ashok Chakravarthy

    2015-01-01

    Full Text Available The present work was the development of a simple, efficient, and reproducible stability-indicating reverse-phase high performance liquid chromatographic (RP-HPLC method for simultaneous determination enrofloxacin (EFX and its degradation products including ethylenediamine impurity, desfluoro impurity, ciprofloxacin impurity, chloro impurity, fluoroquinolonic acid impurity, and decarboxylated impurity in tablet dosage forms. The separation of EFX and its degradation products in tablets was carried out on Kromasil C-18 (250×4.6 mm, 5 μm column using 0.1% (v/v TEA in 10 mM KH2PO4 (pH 2.5 buffer and methanol by linear gradient program. Flow rate was 1.0 mL min−1 with a column temperature of 35°C and detection wavelength was carried out at 278 nm and 254 nm. The forced degradation studies were performed on EFX tablets under acidic, basic, oxidation, thermal, humidity, and photolytic conditions. The degraded products were well resolved from the main active drug and also from known impurities within 65 minutes. The method was validated in terms of specificity, linearity, LOD, LOQ, accuracy, precision, and robustness as per ICH guidelines. The results obtained from the validation experiments prove that the developed method is a stability-indicating method and suitable for routine analysis.

  12. Preparation, Characterization and Thermal Degradation of Polyimide (4-APS/BTDA)/SiO2 Composite Films

    Science.gov (United States)

    Ahmad, Mansor Bin; Gharayebi, Yadollah; Salit, Mohd. Sapuan; Hussein, Mohd. Zobir; Ebrahimiasl, Saeideh; Dehzangi, Arash

    2012-01-01

    Polyimide/SiO2 composite films were prepared from tetraethoxysilane (TEOS) and poly(amic acid) (PAA) based on aromatic diamine (4-aminophenyl sulfone) (4-APS) and aromatic dianhydride (3,3,4,4-benzophenonetetracarboxylic dianhydride) (BTDA) via a sol-gel process in N-methyl-2-pyrrolidinone (NMP). The prepared polyimide/SiO2 composite films were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and thermogravimetric analysis (TGA). The FTIR results confirmed the synthesis of polyimide (4-APS/BTDA) and the formation of SiO2 particles in the polyimide matrix. Meanwhile, the SEM images showed that the SiO2 particles were well dispersed in the polyimide matrix. Thermal stability and kinetic parameters of the degradation processes for the prepared polyimide/SiO2 composite films were investigated using TGA in N2 atmosphere. The activation energy of the solid-state process was calculated using Flynn–Wall–Ozawa’s method without the knowledge of the reaction mechanism. The results indicated that thermal stability and the values of the calculated activation energies increased with the increase of the TEOS loading and the activation energy also varied with the percentage of weight loss for all compositions. PMID:22606014

  13. Investigation of sorbic acid volatile degradation products in pharmaceutical formulations using static headspace gas chromatography.

    Science.gov (United States)

    Yarramraju, Sitaramaraju; Akurathi, Vamsidhar; Wolfs, Kris; Van Schepdael, Ann; Hoogmartens, Jos; Adams, Erwin

    2007-06-28

    An analytical method that allows simultaneous analysis of sorbic acid and its degradation products was developed using static headspace gas chromatography (HS-GC). AT-Aquawax-DA, the capillary column used, showed good selectivity and separation towards sorbic acid and its degradation products. Sorbic acid degradation was investigated in both acidic and aqueous media at room and elevated temperatures. In total 12 sorbic acid degradation products were found, 8 of which could be characterized. The method was investigated for its accuracy towards estimation of degradation products. Using the HS-GC method different batches of pharmaceutical preparations such as cold cream, cetomacrogol cream and vaseline were investigated for sorbic acid degradation products which were estimated by applying the standard addition method. Acetaldehyde was found to be the major degradation product. The other identified degradation products were: acetone; 2-methylfuran; crotonaldehyde; alfa-angelicalactone; 2-acetyl, 5-methylfuran; toluene and 2,5-dimethylfuran. Both mass spectrometeric (MS) and flame ionization detection (FID) were used. The qualitative investigation was done on HS-GC-MS and the quantitative work on HS-GC-FID.

  14. ENZYMATIC HYDROLYSIS AS AN ENVIRONMENTALLY FRIENDLY PROCESS COMPARED TO THERMAL HYDROLYSIS FOR INSTANT COFFEE PRODUCTION

    Directory of Open Access Journals (Sweden)

    I. J. Baraldi

    Full Text Available Abstract Conventional production of instant coffee is based on solubilisation of polysaccharides present in roasted coffee. Higher process temperatures increase the solubilisation yield, but also lead to carbohydrate degradation and formation of undesirable volatile compounds. Enzymatic hydrolysis of roasted coffee is an alternative to minimize carbohydrate degradation. In this work, products obtained from thermal and enzymatic processes were compared in terms of carbohydrates and volatiles composition. Roasted coffee was extracted with water at 125 °C, and spent coffee was processed by thermal (180 °C or enzymatic hydrolysis. Enzymatic hydrolysis experiments were carried out at 50 °C using the commercial enzyme preparations Powercell (Prozyn, Galactomannanase (HBI-Enzymes, and Ultraflo XL (Novozymes. These formulations were previously selected from eleven different commercial enzyme preparations, and their main enzymatic activities included cellulase, galactomannanase, galactanase, and β-glucanase. Enzymatic hydrolysis yield was 18% (dry basis, similar to the extraction yield at 125 °C (20%, but lower than the thermal hydrolysis yield at 180 °C (28%. Instant coffee produced by enzymatic hydrolysis had a low content of undesirable volatile compounds and 21% (w/w of total carbohydrates. These results point to the enzymatic process as a feasible alternative for instant coffee production, with benefits including improved quality as well as reduced energy consumption.

  15. Solvent-free preparation of polylactic acid fibers by melt electrospinning using umbrella-like spray head and alleviation of problematic thermal degradation

    Directory of Open Access Journals (Sweden)

    Liu Yong

    2012-01-01

    Full Text Available Melt electrospinning is an even simpler and safer method compared with the solution electrospinning in the production of ultra-fine fibers. Polylactic acid (PLA is a biodegradable and resorbable aliphatic ester that has received significant attention in recent years. PLA is easily degradable at high temperature in the process of melt electrospinning. High efficient fibers were made using our designed umbrella-like spray head spinning facility in this work. To find how to alleviate the problematic degradation and what factors could be relevant to degradation, temperature, relative molecular mass, Differential Scanning Calorimeter and X-ray Diffraction patterns before and after spinning were investigated and compared with each other. Results showed that fibers were facile shorten and fractured when spun at 245°C while the relative molecular mass of PLA fibers decreased markedly as compared with that spun at 210°C. To hinder the degradation, couple of experimental efforts were implemented with adding antioxidants, raising spinning voltage, lowering temperature, and reducing residence time. After such efforts, it was observed that the relative molecular mass of the PLA fibers was higher than those without inputting any efforts. The effect of antioxidant 1010 was found the most promising on the alleviation of PLA problematic thermal degradation.

  16. Model systems for the study of MSWI fly ash thermal degradation. Kinetics of active carbon-silica gel mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Collina, E.; Lasagni, M.; Pitea, D. [Universita Milano-Bicocca, Milano (Italy); Barilli, L. [CAP Gestione s.p.a., Milano (Italy)

    2004-09-15

    The thermal behavior of MSWI fly ash and model systems was studied in batch experiments in air. A global parameter, Total Organic Carbon (TOC), was used to measure the decrease of reagent concentration in time. As for the thermal degradation of organic carbon on MSWI fly ash, the only reaction product was CO2 it was shown that the carbon for the reactions didn't come from adsorbed organic compounds but from the native carbon matrix of MSWI fly ash. The TOC vs time data were well fitted by the deconvolution treatment and a generalized kinetic model for oxidation of fly ash native carbon was developed. It was shown that the measured conversion of native carbon in fly ashes to CO{sub 2} product is the result of two simultaneous reactions taking place at the fly ash surface: the first reaction is the direct impingement of oxygen onto vacant carbon active sites leading to an immediate carbon gasification; the second one is the dissociative oxygen chemisorption followed by the C(O) complex intermediate gasification. The rate determining step is the intermediate oxidation. The model was validated using kinetic data for four native fly ashes, three from danish and one from italian municipal solid waste incinerators for temperatures ranging from 200 C to 600 C. In the thermal treatment of C-SiO{sub 2} model mixture, the only reaction product was CO{sub 2}. TOC versus time data were well fitted with a single exponential, indicating a first-order reaction. The Arrhenius and Eyring plots showed a piecewise linear trend, thus indicating a change in the reaction rate-determining step. Based on the activation and thermodynamic parameters, the following hypothesis were made: (i) in the lower temperature range (LTR), the direct oxydation reaction is the ratelimiting step; (ii) in the higher temperature range (HTR), the oxygen adsorption and the diffusion processes of surface oxygen complexes are the rate-limiting step. The goal of the studies which followed was to collect new

  17. Screening organophosphorus nerve agent degradation products in pesticide mixtures by GC-ICPMS.

    Science.gov (United States)

    Richardson, Douglas D; Caruso, Joseph A

    2007-10-01

    Gas chromatography inductively coupled plasma mass spectrometry (GC-ICPMS) was utilized for the analysis of four organophosphorus nerve agent degradation products in the presence of mixtures of common organophosphorus pesticides. The first degradation products of sarin (isopropyl methylphosphonic acid, GB acid), cyclosarin (cyclohexyl methylphosphonic acid, GF acid), and soman (pinacolyl methylphosphonic acid) as well as their common final hydrolysis product methyl phosphonic acid were utilized throughout these experiments. Due to the non-volatile nature of these alkyl phosphonic acid degradation products, derivatization was performed to generate the volatile tert-butyl dimethylsilyl species. Degraded organophosphorus pesticide standards were obtained for acephate, chlorpyrifos, dichlorvos, ethion, and parathion ethyl. Mixtures consisting of three pesticides in the presence of a single nerve agent degradation product were prepared. GC-ICPMS allowed for the separation and detection of all four degradation products in the presence of pesticide mixtures in just over 12 minutes. This is the first study analyzing pesticides as interfering species for analysis of nerve agent degradation products by GC-ICPMS.

  18. Diesel degradation and biosurfactant production by Gram-positive ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-11-02

    Nov 2, 2009 ... Accidental leakages during hydrocarbon fuels transportation and other activities are inevitable, making these hydrocarbons the most common global environmental pollutants. Current understanding in diesel degradation involves the study of Gram-negative microorganisms. Seven Gram-positive and one.

  19. Biochemical degradation and physical migration of polyphenolic compounds in osmotic dehydrated blueberries with pulsed electric field and thermal pretreatments.

    Science.gov (United States)

    Yu, Yuanshan; Jin, Tony Z; Fan, Xuetong; Wu, Jijun

    2018-01-15

    Fresh blueberries were pretreated by pulsed electric fields (PEF) or thermal pretreatment and then were subject to osmotic dehydration. The changes in contents of anthocyanins, predominantly phenolic acids and flavonols, total phenolics, polyphenol oxidase (PPO) activity and antioxidant activity in the blueberry samples during pretreatment and osmotic dehydration were investigated. Biochemical degradation and physical migration of these nutritive compounds from fruits to osmotic solutions were observed during the pretreatments and osmotic dehydration. PEF pretreated samples had the least degradation loss but the most migration loss of these compounds compared to thermally pretreated and control samples. Higher rates of water loss and solid gain during osmotic dehydration were also obtained by PEF pretreatment, reducing the dehydration time from 130 to 48h. PEF pretreated and dehydrated fruits showed superior appearance to thermally pretreated and control samples. Therefore, PEF pretreatment is a preferred technology that balances nutritive quality, appearance, and dehydration rate. Published by Elsevier Ltd.

  20. Tailoring the degradation rates of thermally responsive hydrogels designed for soft tissue injection by varying the autocatalytic potential

    Science.gov (United States)

    Zhu, Yang; Jiang, Hongbin; Ye, Sang-Ho; Yoshizumi, Tomo; Wagner, William R.

    2015-01-01

    The ability to modulate the degradation properties of biomaterials such as thermally responsive hydrogels is desirable when exploring new therapeutic strategies that rely on the temporary presence of a placed scaffold or gel. Here we report a method of manipulating the absorption rate of a poly(N-isopropylacrylamide) ((poly(NIPAAm)) based hydrogel across a wide range (from 1 d to 5 mo) by small alterations in the composition. Relying upon the autocatalytic effect, the degradation of poly(NIPAAm-co-HEMA-co-MAPLA), (HEMA=2-hydroxyethyl methacrylate; MAPLA=methacrylate-polylactide) was greatly accelerated by adding a fourth monomer methacrylic acid (MAA) at no more than 2 mol% to obtain poly(NIPAAm-co-HEMA-co-MAPLA-co-MAA) (pNHMMj) where j reflects the MAA molar % in the reactant mixture. MAA residue introduction decreased the pH inside the hydrogels and in surrounding buffered solutions. Accelerated degradation positively correlated with MAA content in pNHMMj polymers, putatively by the accelerated cleavage of MAPLA residues to raise the transition temperature of the polymer above body temperature. Physical properties including thermal transition behavior and initial mechanical strength did not vary significantly with MAA content. A rat hindlimb injection model generally reflected the in vitro observation that higher MAA content resulted in more rapid degradation and cellular infiltration. The strategy of tuning the degradation of thermally responsive hydrogels where degradation or solubilization is determined by their polyester components might be applied to other tissue engineering and regenerative medicine applications where designed biomaterial degradation behavior is needed. PMID:25890745

  1. Thermal and pH degradation kinetics of anthocyanins in natural food colorant prepared from black rice bran

    National Research Council Canada - National Science Library

    Loypimai, Patiwit; Moongngarm, Anuchita; Chottanom, Pheeraya

    2016-01-01

    The study of the stability of anthocyanins in food colorant powder is important to predict the quality changes occurring as the food products are processed, to prevent and control the degradation of the anthocyanins...

  2. The mechanism of sonophotocatalytic degradation of methyl orange and its products in aqueous solutions.

    Science.gov (United States)

    He, Yuanhua; Grieser, Franz; Ashokkumar, Muthupandian

    2011-09-01

    In this study, it was found that a hybrid technique, sonophotocatalysis, is able to degrade a parent organic pollutant (methyl orange) as well as its by-products. The analysis of products formed during the whole degradation has demonstrated that the pH or the selection of oxidation process (sonolysis/photocatalysis/sonophotocatalysis) is able to control the degradation pathway. It was shown in the by-products analysis that the solution pH can alter the amount of each product generated during the sonophotocatalytic degradation. It was revealed that the different degradation rates of methyl orange and its products result from the solution pH and the nature of the organic products. Furthermore, a comparison of the data obtained from the oxidation processes on the degradation of the reaction intermediates identified the advantages of the combined system. It is concluded that sonophotocatalysis is capable of yielding a more complete and faster mineralization of organic pollutants than the individual processes. However, as in the degradation of the parent compound, the overall mineralization is lower than an additive effect (negative synergistic effect). Copyright © 2011 Elsevier B.V. All rights reserved.

  3. Rapid and efficient degradation of bisphenol A by chloroperoxidase from Caldariomyces fumago: product analysis and ecotoxicity evaluation of the degraded solution.

    Science.gov (United States)

    Dong, Xiaobo; Li, Haiyun; Jiang, Yucheng; Hu, Mancheng; Li, Shuni; Zhai, Quanguo

    2016-09-01

    To degrade enzymatically bisphenol A (BPA) that causes serious environmental concerns and is difficult to be degraded by chemical or physical methods. BPA (150 mg l(-1)) was completely degraded by chloroperoxidase (CPO)/H2O2 within 7 min at room temperature, atmospheric pressure with the enzyme at 6 μg CPO ml(-1). The degradation products were identified by HPLC-MS, which suggested involvement of multiple steps. Enzymatic treatment followed by existing bioremediation technologies (activated sludge) enhanced removal of COD from 9 to 54 %. Using an ecotoxicity evaluation with Chlorella pyrenoidosa, the degradation products had a lower toxicity than BPA. BPA can be degraded rapidly and efficiently under mild conditions with chloroperoxidase at 6 μg ml(-1). The degradation products had a lower toxicity than BPA.

  4. Study of the influence of combustion parameters on the formation of SO{sub 2}, NO and CO during the thermal degradation of phytosanitary products currently used in West Africa; Etude de l'influence des parametres de combustion sur la formation de SO{sub 2}, de NO et de CO lors de la degradation thermique de produits phytosanitaires d'usage courant en Afrique de l'Ouest

    Energy Technology Data Exchange (ETDEWEB)

    Bouda, M.; Segda, B.G.; Koulidiati, J. [Ouagadougou Univ., Ouagadougou (Burkina Faso). Laboratoire de physique et de chimie de l' environnement; Rogaume, T. [Poitiers a Niort Univ., Chasseneuil-du-Poitou (France). Ecole national superieure de mecanique et d' aerotechnique, Laboratoire de combustion et detonique; Sawadogo, P.W. [Inst. de l' environnement et de recherches agricoles, Ouagadougou (Burkina Faso). Laboratoire sol-eau-plante

    2008-05-15

    The challenge of treating soils in West Africa that have been contaminated with pesticides was discussed. Incineration is considered to be a viable method for the disposal of toxic industrial wastes, including phytosanitary products. The 2 main phytosanitary products currently used in West Africa are Cyperthion D and Cyperthion O. These 2 products were incinerated in a small-scale study in order to determine the influence of combustion parameters on the production of nitrogen monoxide (NO), carbon monoxide (CO), and sulphur dioxide (SO{sub 2}). The incineration process was optimized in order to reduce these emissions and other toxic gases. The study showed that there is a good correlation between the generation of these pollutants during the incineration of phytosanitary wastes and combustion parameters such as oxygen concentration, temperature, and residence time in the reactor core. Emissions of NO and SO{sub 2} decreased with an increase in residence time, but increased with higher local oxygen concentrations and higher combustion temperatures in the reactor core. CO emissions were found to increase with an increase in residence time, but decrease with higher temperatures and higher local oxygen concentrations. The results were used to pursue large-scale assays, in a rotatory incinerator, for the thermal processing of expired phytosanitary products. 22 refs., 2 tabs., 5 figs.

  5. Strongly increased levels of fibrinogen elastase degradation products in patients with ischemic stroke

    NARCIS (Netherlands)

    Lau, L.M.L. de; Cheung, E.Y.L.; Kluft, C.; Leebeek, F.W.G.; Meijer, P.; Laterveer, R.; Dippel, D.W.J.; Maat, M.P.M.de

    2008-01-01

    Ischemic stroke is associated with leucocyte activation. Activated leucocytes release elastase, an enzyme that can degrade fibrinogen. Fibrinogen elastase degradation products (FgEDP) may serve as a specific marker of elastase proteolytic activity. In a case-control study of 111 ischemic stroke

  6. Assessment of soil degradation and resilience at northeast Nile Delta, Egypt: The impact on soil productivity

    Directory of Open Access Journals (Sweden)

    W.A.M. Abdel Kawy

    2012-06-01

    Full Text Available In Egypt, the soil degradation is the main constraint to the development of agricultural sector. In the last few decades, the farmers and the government have made a great effort to resist soil degradation. The resistance of soils to degradation processes by human positive actions is known as soil resilience. This study aims to assess the soil degradation and resilience at northeast Nile Delta and evaluate their impact on the soil productivity. To fulfill these objectives, Landsat ETM+ images and digital elevation model were processed using ENVI 4.7 software to identify the main physiographic units in the area. The recognized units comprised; lacustrine, marine, and alluvial deposits. Twelve soil profiles were undertaken to represent the different mapped units, the locations of the soil profiles were selected to be the same sites previously studied by the Research Institute of Soils and Water (RISW in 1976. Changes in soil properties and productivity index during the last 35 years (1976–2011 were identified. The status of soil degradation was evaluated; the results indicate that the most active soil degradation processes are water logging salinization, and alkalinization. The soil resilience against salinity, alkalinity and water logging was assessed. It was found that the soil productivity index reflects the balance between soil degradation and resilience. The soil degradation processes overcome the soil resilience in most of the study area where the soil productivity index was decreased in 45.82% of the total area.

  7. Thermal Degradation, Mechanical Properties and Morphology of Wheat Straw Flour Filled Recycled Thermoplastic Composites.

    Science.gov (United States)

    Mengeloglu, Fatih; Karakus, Kadir

    2008-01-24

    Thermal behaviors of wheat straw flour (WF) filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One for WFand one for thermoplastics, two main decomposition peaks were observed. Morphologicalstudy showed that addition of coupling agent improved the compatibility between WFs andthermoplastic. WFs were embedded into the thermoplastic matrix indicating improvedadhesion. However, the bonding was not perfect because some debonding can also be seenon the interface of WFs and thermoplastic matrix. In the case of mechanical properties ofWF filled recycled thermoplastic, HDPE and PP based composites provided similar tensileand flexural properties. The addition of coupling agents improved the properties ofthermoplastic composites. MAPE coupling agents performed better in HDPE while MAPPcoupling agents were superior in PP based composites. The composites produced with thecombination of 50-percent mixture of recycled HDPE and PP performed similar with theuse of both coupling agents. All produced composites provided flexural properties requiredby the ASTM standard for polyolefin-based plastic lumber decking boards.

  8. Thermal Degradation, Mechanical Properties and Morphology of Wheat Straw Flour Filled Recycled Thermoplastic Composites

    Directory of Open Access Journals (Sweden)

    Kadir Karakus

    2008-01-01

    Full Text Available Thermal behaviors of wheat straw flour (WF filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One for WFand one for thermoplastics, two main decomposition peaks were observed. Morphologicalstudy showed that addition of coupling agent improved the compatibility between WFs andthermoplastic. WFs were embedded into the thermoplastic matrix indicating improvedadhesion. However, the bonding was not perfect because some debonding can also be seenon the interface of WFs and thermoplastic matrix. In the case of mechanical properties ofWF filled recycled thermoplastic, HDPE and PP based composites provided similar tensileand flexural properties. The addition of coupling agents improved the properties ofthermoplastic composites. MAPE coupling agents performed better in HDPE while MAPPcoupling agents were superior in PP based composites. The composites produced with thecombination of 50-percent mixture of recycled HDPE and PP performed similar with theuse of both coupling agents. All produced composites provided flexural properties requiredby the ASTM standard for polyolefin-based plastic lumber decking boards.

  9. Study on Thermal Degradation Characteristics and Regression Rate Measurement of Paraffin-Based Fuel

    Directory of Open Access Journals (Sweden)

    Songqi Hu

    2015-09-01

    Full Text Available Paraffin fuel has been found to have a regression rate that is higher than conventional HTPB (hydroxyl-terminated polybutadiene fuel and, thus, presents itself as an ideal energy source for a hybrid rocket engine. The energy characteristics of paraffin-based fuel and HTPB fuel have been calculated by the method of minimum free energy. The thermal degradation characteristics were measured for paraffin, pretreated paraffin, HTPB and paraffin-based fuel in different working conditions by the using differential scanning calorimetry (DSC and a thermogravimetric analyzer (TGA. The regression rates of paraffin-based fuel and HTPB fuel were tested by a rectangular solid-gas hybrid engine. The research findings showed that: the specific impulse of paraffin-based fuel is almost the same as that of HTPB fuel; the decomposition temperature of pretreated paraffin is higher than that of the unprocessed paraffin, but lower than that of HTPB; with the increase of paraffin, the initial reaction exothermic peak of paraffin-based fuel is reached in advance, and the initial reaction heat release also increases; the regression rate of paraffin-based fuel is higher than the common HTPB fuel under the same conditions; with the increase of oxidizer mass flow rate, the regression rate of solid fuel increases accordingly for the same fuel formulation.

  10. Tracking degradation in lithium iron phosphate batteries using differential thermal voltammetry

    Science.gov (United States)

    Shibagaki, Toshio; Merla, Yu; Offer, Gregory J.

    2018-01-01

    Diagnosing the state-of-health of lithium ion batteries in-operando is becoming increasingly important for multiple applications. We report the application of differential thermal voltammetry (DTV) to lithium iron phosphate (LFP) cells for the first time, and demonstrate that the technique is capable of diagnosing degradation in a similar way to incremental capacity analysis (ICA). DTV has the advantage of not requiring current and works for multiple cells in parallel, and is less sensitive to temperature introducing errors. Cells were aged by holding at 100% SOC or cycling at 1C charge, 6D discharge, both at an elevated temperature of 45 °C under forced air convection. Cells were periodically characterised, measuring capacity fade, resistance increase (power fade), and DTV fingerprints. The DTV results for both cells correlated well with both capacity and power, suggesting they could be used to diagnose SOH in-operando for both charge and discharge. The DTV peak-to-peak capacity correlated well with total capacity fade for the cycled cell, suggesting that it should be possible to estimate SOC and SOH from DTV for incomplete cycles within the voltage hysteresis region of an LFP cell.

  11. Investigation of degradation products produced by recycling the solvent during chemical degradation of fiber-reinforced composites

    DEFF Research Database (Denmark)

    Ucar, Hülya; Simonsen, Morten Enggrob; Søgaard, Erik Gydesen

    2017-01-01

    Recycling of fiber-reinforced thermoset composites using chemical solvolysis has been investigated thoroughly in recent years, where solvents such as water, alcohols and ketones have been used. However, high costs are related to the use of organic solvents, decreasing the sustainability of the pr......Recycling of fiber-reinforced thermoset composites using chemical solvolysis has been investigated thoroughly in recent years, where solvents such as water, alcohols and ketones have been used. However, high costs are related to the use of organic solvents, decreasing the sustainability...... of the process. In this study, acetone has been used as the organic solvent. To increase the sustainability of the process, the solvent was recycled in eight consecutive batches using new glass fiber-reinforced composites in each recycling. No additional amount of acetone was added, resulting in a reduction...... of solvent consumption by 88%. It was found that the recycled solvent became increasingly more concentrated with degradation products from the epoxy resin and compounds produced by acetone aldol reactions. These degradation products promoted and enhanced the degradation of the composite. Among the compounds...

  12. Degradation kinetics study of cabozantinib by a novel stability-indicating LC method and identification of its major degradation products by LC/TOF-MS and LC-MS/MS.

    Science.gov (United States)

    Wu, Chunyong; Xu, Xue; Feng, Chao; Shi, Yuanyuan; Liu, Wenyuan; Zhu, Xiaoyun; Zhang, Junying

    2014-09-01

    The chemical stability of cabozantinib (CBZ) was investigated using a novel stability-indicating LC method. Forced degradation of CBZ was carried out under acidic, basic, thermal, oxidative and photolytic stress conditions. Hydrolysis and oxidation were the primary pathways for this compound and three major unknown degradation products were characterized by LC/TOF-MS and LC-MS/MS. The major oxidative degradation product was isolated by preparative LC and identified by UV, HRMS and NMR techniques to be N-{4-[(N-oxide-6,7-dimethoxyquinolin-4-yl)oxy]phenyl}-N'-(4-fluorophenyl)-cyclopropane-1,1-dicarboxamide. The developed method was validated as per ICH guidelines and then successfully applied to investigate the degradation kinetics of CBZ. Degradation of CBZ followed first-order kinetics under all experimental conditions. A V-shaped pH-rate profile over the pH range 2-10 was observed with maximum stability at pH 6. The effect of temperature on the rate of CBZ degradation was characterized using the Arrhenius equation. The activation energy for hydrolysis was 57.31kJmol(-1) in alkaline solution. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Toxicity and physical properties of atrazine and its degradation products: A literature survey

    Energy Technology Data Exchange (ETDEWEB)

    Pugh, K.C.

    1994-10-01

    The Tennessee Valley Authority`s Environmental Research Center has been developing a means of detoxifying atrazine waste waters using TiO{sub 2} photocatalysis. The toxicity and physical properties of atrazine and its degradation products will probably be required information in obtaining permits from the United States Environmental Protection Agency for the demonstration of any photocatalytic treatment of atrazine waste waters. The following report is a literature survey of the toxicological and physical properties of atrazine and its degradation products.

  14. The Design and Development of Enhanced Thermal Desorption Products

    Directory of Open Access Journals (Sweden)

    R. Humble

    2005-01-01

    Full Text Available This research study is based on a knowledge-transfer collaboration between The National Centre for Product Design and Development Research (PDR and Markes International Ltd. The aim of the two-year collaboration has been to implement design tools and techniques for the development of enhanced thermal desorption products. Thermal desorption is a highly-specialised technique for the analysis of trace-level volatile organic compounds. This technique allows minute quantities of these compounds to be measured; however, there is an increasing demand from customers for greater sensitivity over a wider range of applications, which means new design methodologies need to be evaluated. The thermal desorption process combines a number of disparate chemical, thermal and mechanical disciplines, and the major design constraints arise from the need to cycle the sample through extremes in temperature. Following the implementation of a comprehensive product design specification, detailed design solutions have been developed using the latest 3D CAD techniques. The impact of the advanced design techniques is assessed in terms of improved product performance and reduced development times, and the wider implications of new product development within small companies are highlighted.  

  15. Application of new thermoanalytical methods for the investigation of thermal and thermo-oxidative degradation mechanisms and network formation polymers

    OpenAIRE

    Dümichen, Erik

    2016-01-01

    Due to the macromolecular structure of polymers, the application of thermoanalytical meth-ods is advantageous. Thus two new thermoanalytical techniques were developed. The use of these methods was demonstrated on the basis of real examples and the results were com-pared to established thermoanalytical methods. For the thermal and thermo-oxidative analysis of gaseous thermal decomposition products the thermogravimetry (TGA) was coupled with thermal desorption gas chromatography-mass spectro...

  16. HEAVY AND THERMAL OIL RECOVERY PRODUCTION MECHANISMS

    Energy Technology Data Exchange (ETDEWEB)

    Anthony R. Kovscek; Louis M. Castanier

    2002-09-30

    The Stanford University Petroleum Research Institute (SUPRI-A) conducts a broad spectrum of research intended to help improve the recovery efficiency from difficult to produce reservoirs including heavy oil and fractured low permeability systems. Our scope of work is relevant across near-, mid-, and long-term time frames. The primary functions of the group are to conduct direction-setting research, transfer research results to industry, and educate and train students for careers in industry. Presently, research in SUPRI-A is divided into 5 main project areas. These projects and their goals include: (1) Multiphase flow and rock properties--to develop better understanding of the physics of displacement in porous media through experiment and theory. This category includes work on imbibition, flow in fractured media, and the effect of temperature on relative permeability and capillary pressure. (2) Hot fluid injection--to improve the application of nonconventional wells for enhanced oil recovery and elucidate the mechanisms of steamdrive in low permeability, fractured porous media. (3) Mechanisms of primary heavy oil recovery--to develop a mechanistic understanding of so-called ''foamy oil'' and its associated physical chemistry. (4) In-situ combustion--to evaluate the effect of different reservoir parameters on the insitu combustion process. (5) Reservoir definition--to develop and improve techniques for evaluating formation properties from production information. What follows is a report on activities for the past year. Significant progress was made in all areas.

  17. Degradation of the pharmaceuticals diclofenac and sulfamethoxazole and their transformation products under controlled environmental conditions

    Energy Technology Data Exchange (ETDEWEB)

    Poirier-Larabie, S. [Aquatic Contaminants Research Division, Science and Water Technology Directorate, Environment Canada, Montréal, Québec H2Y 2E7 (Canada); Segura, P.A. [Department of Chemistry, Université de Sherbrooke, Sherbrooke, Québec J1K 2R1 (Canada); Gagnon, C., E-mail: christian.gagnon@canada.ca [Aquatic Contaminants Research Division, Science and Water Technology Directorate, Environment Canada, Montréal, Québec H2Y 2E7 (Canada)

    2016-07-01

    Contamination of the aquatic environment by pharmaceuticals via urban effluents is well known. Several classes of drugs have been identified in waterways surrounding these effluents in the last 15 years. To better understand the fate of pharmaceuticals in ecosystems, degradation processes need to be investigated and transformation products must be identified. Thus, this study presents the first comparative study between three different natural environmental conditions: photolysis and biodegradation in aerobic and anaerobic conditions both in the dark of diclofenac and sulfamethoxazole, two common drugs present in significant amounts in impacted surface waters. Results indicated that degradation kinetics differed depending on the process and the type of drug and the observed transformation products also differed among these exposure conditions. Diclofenac was nearly degraded by photolysis after 4 days, while its concentration only decreased by 42% after 57 days of exposure to bacteria in aerobic media and barely 1% in anaerobic media. For sulfamethoxazole, 84% of the initial concentration was still present after 11 days of exposure to light, while biodegradation decreased its concentration by 33% after 58 days of exposure under aerobic conditions and 5% after 70 days of anaerobic exposure. In addition, several transformation products were observed and persisted over time while others degraded in turn. For diclofenac, chlorine atoms were lost primarily in the photolysis, while a redox reaction was promoted by biodegradation under aerobic conditions. For sulfamethoxazole, isomerization was favored by photolysis while a redox reaction was also favored by the biodegradation under aerobic conditions. To summarize this study points out the occurrence of different transformation products under variable degradation conditions and demonstrates that specific functional groups are involved in the tested natural attenuation processes. Given the complexity of environmental

  18. Dependence of transformation product formation on pH during photolytic and photocatalytic degradation of ciprofloxacin

    Energy Technology Data Exchange (ETDEWEB)

    Salma, Alaa [Institut für Energie- und Umwelttechnik e. V. (IUTA, Institute of Energy and Environmental Technology), Bliersheimer Straße 58-60, 47229 Duisburg (Germany); Thoröe-Boveleth, Sven [University Hospital Aachen, Institute for Hygiene and Environmental Medicine, Pauwelsstraße 30, 52074 Aachen (Germany); Schmidt, Torsten C. [University Duisburg-Essen, Faculty of Chemistry, Instrumental Analytical Chemistry, Universitätsstraße 5, 45141 Essen (Germany); Centre for Water and Environmental Research (ZWU), University Duisburg-Essen, Universitätsstraße 2, 45141 Essen (Germany); Tuerk, Jochen, E-mail: tuerk@iuta.de [Institut für Energie- und Umwelttechnik e. V. (IUTA, Institute of Energy and Environmental Technology), Bliersheimer Straße 58-60, 47229 Duisburg (Germany); Centre for Water and Environmental Research (ZWU), University Duisburg-Essen, Universitätsstraße 2, 45141 Essen (Germany)

    2016-08-05

    Highlights: • Identification of transformation products using an isotopically labeled surrogate. • 4 of 18 detected transformation products have been identified for the first time. • Revision of 2 molecular structures of previously reported transformation products. • PH dependence of photolytic and photocatalytic degradation of ciprofloxacin. - Abstract: Ciprofloxacin (CIP) is a broad-spectrum antibiotic with five pH dependent species in aqueous medium, which makes its degradation behavior difficult to predict. For the identification of transformation products and prediction of degradation mechanisms, a new experimental concept making use of isotopically labeled compounds together with high resolution mass spectrometry was successfully established. The utilization of deuterated ciprofloxacin (CIP-d8) facilitated the prediction of three different degradation pathways and the corresponding degradation products, four of which were identified for the first time. Moreover, two molecular structures of previously reported transformation products were revised according to the mass spectra and product ion spectra of the deuterated transformation products. Altogether, 18 transformation products have been identified during the photolytic and photocatalytic reactions at different pH values (3, 5, 7 and 9). In this work the influence of pH on both reaction kinetics and degradation mechanism was investigated for direct ultraviolet photolysis (UV-C irradiation) and photocatalysis (TiO{sub 2}/UV-C). It could be shown that the removal rates strongly depended on pH with highest removal rates at pH 9. A comparison with those at pH 3 clearly indicated that under acidic conditions ciprofloxacin cannot be easily excited by UV irradiation. We could confirm that the first reaction step for both oxidative treatment processes is mainly defluorination, followed by degradation at the piperazine ring of CIP.

  19. The correlation between thermal comfort in buildings and fashion products.

    Science.gov (United States)

    Giesel, Aline; de Mello Souza, Patrícia

    2012-01-01

    This article is about thermal comfort in the wearable product. The research correlates fashion and architecture, in so far as it elects the brise soleil - an architectural element capable of regulating temperature and ventilation inside buildings - as a study referential, in trying to transpose and adapt its mechanisms to the wearable apparel.

  20. Non-thermal production of pure hydrogen from biomass : HYVOLUTION

    NARCIS (Netherlands)

    Claassen, P.A.M.; Vrije, de G.J.

    2006-01-01

    HYVOLUTION is the acronym of an Integrated Project ¿Non-thermal production of pure hydrogen from biomass¿ which has been granted in the Sixth EU Framework Programme on Research, Technological Development and Demonstration, Priority 6.1.ii, Sustainable Energy Systems. The aim of HYVOLUTION:

  1. Investigation of degradation products of cocaine and benzoylecgonine in the aquatic environment

    Energy Technology Data Exchange (ETDEWEB)

    Bijlsma, Lubertus; Boix, Clara [Research Institute for Pesticides and Water, University Jaume I, Avda. Sos Baynat, E-12071 Castellón (Spain); Niessen, Wilfried M.A. [hyphen MassSpec, Leiden (Netherlands); Ibáñez, María; Sancho, Juan V. [Research Institute for Pesticides and Water, University Jaume I, Avda. Sos Baynat, E-12071 Castellón (Spain); Hernández, Félix, E-mail: felix.hernandez@uji.es [Research Institute for Pesticides and Water, University Jaume I, Avda. Sos Baynat, E-12071 Castellón (Spain)

    2013-01-15

    In this work, ultra-high-performance liquid chromatography (UHPLC) coupled to a hybrid quadrupole time-of-flight mass spectrometer (QTOF MS) has allowed the discovery and elucidation of degradation products of cocaine and its main metabolite benzoylecgonine (BE) in water. Spiked surface water was subjected to hydrolysis, chlorination and photo-degradation (both ultraviolet irradiation and simulated sunlight). After degradation of cocaine, up to sixteen compounds were detected and tentatively identified (1 resulting from hydrolysis; 8 from chlorination; 7 from photo-degradation), three of which are well known cocaine metabolites (BE, norbenzoylecgonine and norcocaine). Regarding BE degradation, up to ten compounds were found (3 from chlorination; 7 from photo-degradation), including one known metabolite (norbenzoylecgonine). Since reference standards were available for the major metabolites, they could be confirmed using information on retention time and fragment ions. The other degradates resulted from chlorination, dealkylation, hydroxylation and nitration, or from a combination of these processes. Several influent and effluent sewage water, and surface water samples were then screened for the identified compounds (known and unknown) using UHPLC–tandem MS with triple quadrupole. BE, norcocaine and norbenzoylecgonine were identified in these samples as major metabolites. Four previously unreported degradates were also found in some of the samples under study, illustrating the usefulness and applicability of the degradation experiments performed in this work. Highlights: ► Cocaine and benzoylecgonine degradation/transformation products investigated in water ► Hydrolysis, chlorination and photo degradation studied under laboratory conditions ► Several TPs discovered and tentatively elucidated by high resolution MS ► Structures of non-previously reported TPs have been suggested. ► Several reported/known TPs but also new TPs were found in sewage and surface

  2. Investigation on Thermal Degradation Process of Polymer Solar Cells Based on Blend of PBDTTT-C and PC70BM

    Directory of Open Access Journals (Sweden)

    Yu Ning

    2014-01-01

    Full Text Available The effects of thermal treatment on the photovoltaic performance of conventional and inverted polymer solar cells (PSCs based on the combination of poly[(4,8-bis-(2-ethylhexyloxy-benzo[1,2-b;4,5-b′]dithiophene-2,6-diyl-alt-(4-(2-ethylhexanoyl-thie-no[3,4-b]thiophene-2,6-diyl] (PBDTTT-C and [6,6]-phenyl C70-butyric acid methyl ester (PC70BM are investigated. The transient photoconductivity, the absorption spectra, and the transmission electron microscopy (TEM images have been employed to study the thermal degradation of the inverted PSCs. The degradation is attributed to the inefficient charge generation and imbalance in charge-carrier transport, which is closely associated with the morphological evolution of the active layer with prolonged heating time.

  3. Validated stability indicating methods for determination of nitazoxanide in presence of its degradation products

    Directory of Open Access Journals (Sweden)

    Nouruddin W. Ali

    2012-04-01

    Full Text Available Three sensitive, selective and reproducible stability-indicating methods are presented for determination of nitazoxanide (NTZ, a new anti-protozoal drug, in presence of its degradation products. Method A utilizes the first derivative of ratio spectra spectrophotometry by measurement of the amplitude at 364.4 nm using one of the degradation products as a divisor. Method B is a chemometric-assisted spectrophotometry, where principal component regression (PCR and partial least squares (PLS were applied. These two approaches were successfully applied to quantify NTZ in presence of degradation products using the information included in the absorption spectra in the range 260–360 nm. Method C is based on the separation of NTZ from its degradation products followed by densitometric measurement of the bands at 254 nm. The separation was carried out on silica gel 60F254, using chloroform–methanol–ammonia solution–glacial acetic acid (95:5:1:1 by volume, pH=5.80 as a developing system. These methods are suitable as stability-indicating methods for the determination of NTZ in presence of its degradation products either in bulk powder or in pharmaceutical formulations. Statistical analysis of the results has been carried out revealing high accuracy and good precision. Keywords: Nitazoxanide, Degradation, Derivative spectrophotometry, Chemometrics, TLC-densitometry, Stability-indicating methods

  4. tRNA-dependent cysteine biosynthetic pathway represents a strategy to increase cysteine contents by preventing it from thermal degradation: thermal adaptation of methanogenic archaea ancestor.

    Science.gov (United States)

    Qu, Ge; Wang, Wei; Chen, Ling-Ling; Qian, Shao-Song; Zhang, Hong-Yu

    2009-10-01

    Although cysteine (Cys) is beneficial to stabilize protein structures, it is not prevalent in thermophiles. For instance, the Cys contents in most thermophilic archaea are only around 0.7%. However, methanogenic archaea, no matter thermophilic or not, contain relatively abundant Cys, which remains elusive for a long time. Recently, Klipcan et al. correlated this intriguing property of methanogenic archaea with their unique tRNA-dependent Cys biosynthetic pathway. But, the deep reasons underlying the correlation are ambiguous. Considering the facts that free Cys is thermally labile and the tRNA-dependent Cys biosynthesis avoids the use of free Cys, we speculate that the unique Cys biosynthetic pathway represents a strategy to increase Cys contents by preventing it from thermal degradation, which may be relevant to the thermal adaptation of methanogenic archaea ancestor.

  5. Toxicity evaluations of nanoclays and thermally degraded byproducts through spectroscopical and microscopical approaches.

    Science.gov (United States)

    Wagner, Alixandra; Eldawud, Reem; White, Andrew; Agarwal, Sushant; Stueckle, Todd A; Sierros, Konstantinos A; Rojanasakul, Yon; Gupta, Rakesh K; Dinu, Cerasela Zoica

    2017-01-01

    Montmorillonite is a type of nanoclay that originates from the clay fraction of the soil and is incorporated into polymers to form nanocomposites with enhanced mechanical strength, barrier, and flammability properties used for food packaging, automotive, and medical devices. However, with implementation in such consumer applications, the interaction of montmorillonite-based composites or derived byproducts with biological systems needs to be investigated. Herein we examined the potential of Cloisite Na+ (pristine) and Cloisite 30B (organically modified montmorillonite nanoclay) and their thermally degraded byproducts' to induce toxicity in model human lung epithelial cells. The experimental set-up mimicked biological exposure in manufacturing and disposal areas and employed cellular treatments with occupationally relevant doses of nanoclays previously characterized using spectroscopical and microscopical approaches. For nanoclay-cellular interactions and for cellular analyses respectively, biosensorial-based analytical platforms were used, with induced cellular changes being confirmed via live cell counts, viability assays, and cell imaging. Our analysis of byproducts' chemical and physical properties revealed both structural and functional changes. Real-time high throughput analyses of exposed cellular systems confirmed that nanoclay induced significant toxic effects, with Cloisite 30B showing time-dependent decreases in live cell count and cellular viability relative to control and pristine nanoclay, respectively. Byproducts produced less toxic effects; all treatments caused alterations in the cell morphology upon exposure. Our morphological, behavioral, and viability cellular changes show that nanoclays have the potential to produce toxic effects when used both in manufacturing or disposal environments. The reported toxicological mechanisms prove the extensibility of a biosensorial-based platform for cellular behavior analysis upon treatment with a variety of

  6. Time extrapolation of radiolytic degradation product kinetics: the case of polyurethane; Extrapolation dans le temps des cinetiques de production des produits de degradation radiolytique: application a un polyurethane

    Energy Technology Data Exchange (ETDEWEB)

    Dannoux, A

    2007-02-15

    The prediction of the environmental impact of organic materials in nuclear waste geological storage needs knowledge of radiolytic degradation mechanisms and kinetics in aerobic and anaerobic conditions. In this framework, the effect of high doses (> MGy) and the variation of dose rate have to be considered. The material studied is a polyurethane composed of polyether soft segment and aromatic hard segments. Mechanisms were built on the analysis of material submitted to irradiations of simulation (high energy electrons and gamma radiation) by FTIR spectroscopy and gaseous and liquid degradation products by gas mass spectrometry and size exclusion chromatography. The electron paramagnetic resonance study of radical process and the determination of oxygen consumption and gas formation radiolytic yields allowed us to acquire kinetic data and to estimate dose rate and high doses effects. The polyurethane radio-oxidation mainly concerns soft segments and induced cross-linkings and production by scissions of oxidised compounds (esters, alcohols, carboxylic acids). The kinetic of radical termination is rapid and the dose rate effect is limited. After 10 MGy, branching and scission reactions are in equilibrium and low molecular weight products accumulate. At last, the degradation products release in water is influenced by the oxidation rate and the temperature. After 10 MGy, the soluble fraction is stabilised at 25%. The water soluble products identified by electro-spray ionisation mass spectrometry (alcohols, aldehydes, carboxylic acids) potentially formed complexes with radionuclides. (author)

  7. Assessment by HPLC of the degradation behavior of acitretin under hydrolytic, oxidative, photolytic and thermal stress conditions

    Directory of Open Access Journals (Sweden)

    Pawan K. Porwal

    2014-12-01

    Full Text Available Acitretin is a photosensitive oral retinoid with very limited data available on its degradation. The official HPLC method for acitretin determination was insufficient to resolve the degradation products generated during stability studies. Therefore, an isocratic RP-HPLC–UV method was developed for the determination of acitretin in the presence of its related impurities and degradation products. Efficient chromatographic separation was achieved on a Thermo beta-basic column C18 (100 mm×4.6 mm, 5 μm with mobile phase containing 0.3% (v/v glacial acetic acid with acetonitrile (ACN and isopropyl alcohol (IPA in an isocratic ratio of 70:30 at a flow rate of 1.0 mL/min with the eluent monitored at 360 nm. The method was validated for specificity, linearity, precision, accuracy and robustness. The calibration plot was linear over the concentration range of 50–150 μg/mL with a correlation coefficient (r2 of 0.999. The proposed method was used to investigate the degradation kinetics of acitretin under the different degradative conditions. The degradation rate constant (K, half-life (t1/2, and t90 were calculated. Degradation of acitretin followed pseudo-first-order kinetics. The drug was found to be less stable under acidic and photolytic degradation conditions: the photolytic degradation constants for acitretin in sunlight and UV light were 0.002698% and 0.0008402% min−1, respectively. The LOD for acitretin and the known impurities were at a level below 0.02%. The method shows consistent recoveries for ACTR (99.8%–101.2% and also for its known impurities (97.2–101.3%. The method was found to be accurate, precise, linear, specific, sensitive, rugged, robust, and useful for characterizing the stability of this chemical.

  8. High performance liquid chromatographic determination of oxeladin citrate and oxybutynin hydrochloride and their degradation products.

    Science.gov (United States)

    El-Gindy, Alaa

    2005-08-01

    Two high performance liquid chromatographic (HPLC) methods are presented for the determination of oxeladin citrate (OL) and oxybutynin hydrochloride (OB) and their degradation products. The first method was based on HPLC separation of OL from its degradation product using a Nucleosil C(18) column with a mobile phase consisting of acetonitrile -0.1% phosphoric acid (60:40 v/v). The second method was based on HPLC separation of OB from its degradation product using a VP-ODS C(18) column with a mobile phase consisting of acetonitrile/0.01 M potassium dihydrogen phosphate/diethylamine (60:40:0.2). Quantitation was achieved with UV detection at 220 nm based on peak area. The two HPLC methods were applied for the determination of OL or OB, their degradation products, methylparaben and propylparaben in pharmaceutical preparations. The proposed methods were used to investigate the kinetics of acidic and alkaline degradation processes of OL and OB at different temperatures and the apparent pseudofirst-order rate constant, half-life and activation energy were calculated. The pH-rate profiles of degradation of OL and OB in Britton-Robinson buffer solutions within the pH range 2-12 were studied.

  9. Thermal extraction analysis of five Los Azufres production wells

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, Paul; Quijano, Luis

    1995-01-26

    Thermal energy extraction from five wells supplying 5-MWe wellhead generators in three zones of the Los Azufres geothermal field has been examined from production and chemical data compiled over 14-years of operation. The data, as annual means, are useful in observing small-scale changes in reservoir performance with continuous production. The chemical components are chloride for quality control and the geothermometer elements for reservoir temperatures. The flowrate and fluid enthalpy data are used to calculate the thermal extraction rates. Integration of these data provides an estimate of the total energy extracted from the zone surrounding the well. The combined production and chemical geothermometer data are used to model the produced fluid as coming from just-penetrating wells for which the annual produced mass originates from a series of concentric hemispheric shells moving out into the reservoir. Estimates are made of the drawdown distance into the reservoir and the far-field conditions.

  10. Photo- and thermal degradation of olive oil measured using an optical fibre smartphone spectrofluorimeter

    Science.gov (United States)

    Hossain, Md Arafat; Canning, John; Cook, Kevin; Ast, Sandra; Jamalipour, Abbas

    2017-04-01

    Degradation of olive oil under light and heat are analysed using an optical fibre based low-cost portable smartphone spectrofluorimeter. Visible fluorescence bands associated with phenolic acids, vitamins and chlorophyll centred at λ 452, 525 and 670 nm respectively are generated using near-UV excitation (LED λex 370 nm), of extra virgin olive oil are degraded more likely than refined olive oil under light and heat exposure. Packaging is shown to be critical when assessing the origin of degradation.

  11. Treatment of low level radioactive liquid waste containing appreciable concentration of TBP degraded products.

    Science.gov (United States)

    Valsala, T P; Sonavane, M S; Kore, S G; Sonar, N L; De, Vaishali; Raghavendra, Y; Chattopadyaya, S; Dani, U; Kulkarni, Y; Changrani, R D

    2011-11-30

    The acidic and alkaline low level radioactive liquid waste (LLW) generated during the concentration of high level radioactive liquid waste (HLW) prior to vitrification and ion exchange treatment of intermediate level radioactive liquid waste (ILW), respectively are decontaminated by chemical co-precipitation before discharge to the environment. LLW stream generated from the ion exchange treatment of ILW contained high concentrations of carbonates, tributyl phosphate (TBP) degraded products and problematic radio nuclides like (106)Ru and (99)Tc. Presence of TBP degraded products was interfering with the co-precipitation process. In view of this a modified chemical treatment scheme was formulated for the treatment of this waste stream. By mixing the acidic LLW and alkaline LLW, the carbonates in the alkaline LLW were destroyed and the TBP degraded products got separated as a layer at the top of the vessel. By making use of the modified co-precipitation process the effluent stream (1-2 μCi/L) became dischargeable to the environment after appropriate dilution. Based on the lab scale studies about 250 m(3) of LLW was treated in the plant. The higher activity of the TBP degraded products separated was due to short lived (90)Y isotope. The cement waste product prepared using the TBP degraded product was having good chemical durability and compressive strength. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. Identification of Forced Degradation Products of Itopride by LC-PDA and LC-MS.

    Science.gov (United States)

    Joshi, Payal; Bhoir, Suvarna; Bhagwat, A M; Vishwanath, K; Jadhav, R K

    2011-05-01

    Degradation products of itopride formed under different forced conditions have been identified using LC-PDA and LC-MS techniques. Itopride was subjected to forced degradation under the conditions of hydrolysis, photolysis, oxidation, dry and wet heat, in accordance with the International Conference on Harmonization. The stress solutions were chromatographed on reversed phase C18 (250×4.6 mm, 5 μm) column with a mobile phase methanol:water (55:45, v/v) at a detection wavelength of 215 nm. Itopride degraded in acid, alkali and oxidative stress conditions. The stability indicating method was developed and validated. The degradation pathway of the drug to products II-VIII is proposed.

  13. LC-MS characterization of valsartan degradation products and comparison with LC-PDA

    Directory of Open Access Journals (Sweden)

    Sumaia Araújo Pires

    2015-12-01

    Full Text Available abstract Valsartan was submitted to forced degradation under acid hydrolysis condition as prescribed by the ICH. Degraded sample aliquots were separated via HPLC using a Hypersil ODS (C18 column (250 x 4.6 mm i.d., 5 µm. Either photodiode array (PDA detection or mass spectrometry (MS full scan monitoring of HPLC runs were used. HPLC-PDA failed to indicate Valsartan degradation under forced acid degradation, showing an insignificant peak area variation and that Valsartan apparently remained pure. HPLC-MS using electrospray ionization (ESI and total ionic current (TIC monitoring did not reveal any peak variation either, but inspection of the ESI mass spectra showed the appearance of m/z 306 and m/z 352 ions for the same retention time as that of Valsartan (m/z 436. These ions were identified as being protonated molecules of two co-eluting degradation products formed by hydrolysis. These assignments were confirmed by ESI-MS/MS with direct infusion of the degraded samples. The results showed that the use of selective HPLC-MS is essential for monitoring Valsartan degradation. Efficient HPLC separation coupled to selective and structural diagnostic MS monitoring seems therefore mandatory for comprehensive drug degradation studies, particularly for new drugs and formulations, and for method development.

  14. [Ligninolytic enzyme production by white rot fungi during paraquat (herbicide) degradation].

    Science.gov (United States)

    Camacho-Morales, Reyna L; Gerardo-Gerardo, José Luis; Guillén Navarro, Karina; Sánchez, José E

    Paraquat is a widely used herbicide in agriculture. Its inappropriate use and wide distribution represents a serious pollution problem for soil and water. White rot fungi are capable of degrading pollutants having a similar structure to that of lignin, such as paraquat. This study evaluated the degradation effect of paraquat on the production of ligninolytic enzymes by white rot fungi isolated from the South of Mexico. Six fungal strains showed tolerance to the herbicide in solid culture. Three of the six evaluated strains showed levels of degradation of 32, 26 and 47% (Polyporus tricholoma, Cilindrobasidium laeve and Deconica citrispora, respectively) after twelve days of cultivation in the presence of the xenobiotic. An increase in laccase and manganese peroxidase (MnP) activities was detected in the strains showing the highest percentage of degradation. Experiments were done with enzyme extracts from the extracellular medium with the two strains showing more degradation potential and enzyme production. After 24hours of incubation, a degradation of 49% of the initial paraquat concentration was observed for D. citrispora. These results suggest that paraquat degradation can be attributed to the presence of extracellular enzymes from white rot fungi. In this work the first evidence of the biodegradation potential of D. citrispora and Cilindrobasidium leave is shown. Copyright © 2017 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  15. Fractionation and physicochemical characterization of lignin from waste jute bags: Effect of process parameters on yield and thermal degradation.

    Science.gov (United States)

    Ahuja, Dheeraj; Kaushik, Anupama; Chauhan, Ghanshyam S

    2017-04-01

    In this work lignin was extracted from waste jute bags using soda cooking method and effect of varying alkali concentration and pH on yield, purity, structure and thermal degradation of lignin were studied. The Lignin yield, chemical composition and purity were assessed using TAPPI method and UV-vis spectroscopy. Yield and purity of lignin ranged from 27 to 58% and 50-94%, respectively for all the samples and was maximum for 8% alkali concentration and at pH 2 giving higher thermal stability. Chemical structure, thermal stability and elementary analysis of lignin were studied using FTIR, (H)NMR, thermo gravimetric analysis (TGA) and Elemental analyzer. FTIR and (H)NMR results showed that core structure of lignin starts breaking beyond 10% alkali concentration. S/G ratio shows the dominance of Syringyl unit over guaiacyl unit. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Relationship between in situ degradation kinetics and in vitro gas production fermentation using different mathematical models

    NARCIS (Netherlands)

    Rodrigues, M.A.M.; Cone, J.W.; Ferreira, L.M.M.; Blok, M.C.; Guedes, C.

    2009-01-01

    In vitro and in situ studies were conducted to evaluate the influence of different mathematical models, used to fit gas production profiles of 15 feedstuffs, on estimates of nylon bag organic matter (OM) degradation kinetics. The gas production data were fitted to Exponential, Logistic, Gompertz and

  17. In situ ruminal crude protein degradability of by-products from cereals, oilseeds and animal origin

    NARCIS (Netherlands)

    Habib, G.; Khan, N.A.; Ali, M.; Bezabih, M.

    2013-01-01

    The aim of this study was to establish a database on in situ ruminal crude protein (CP) degradability characteristics of by-products from cereal grains, oilseeds and animal origin commonly fed to ruminants in Pakistan and South Asian Countries. The oilseed by-products were soybean meal, sunflower

  18. Impact of higher-order heme degradation products on hepatic function and hemodynamics

    NARCIS (Netherlands)

    Seidel, Raphael A.; Claudel, Thierry; Schleser, Franziska A.; Ojha, Navin K.; Westerhausen, Matthias; Nietzsche, Sandor; Sponholz, Christoph; Cuperus, Frans; Coldewey, Sina M.; Heinemann, Stefan H.; Pohnert, Georg; Trauner, Michael; Bauer, Michael

    Background & Aims: Biliverdin and bilirubin were previously considered end products of heme catabolism; now, however, there is evidence for further degradation to diverse bioactive products. Z-BOX A and Z-BOX B arise upon oxidation with unknown implications for hepatocellular function and integrity.

  19. Thermal degradation of sucralose: a combination of analytical methods to determine stability and chlorinated byproducts

    Science.gov (United States)

    de Oliveira, Diogo N.; de Menezes, Maico; Catharino, Rodrigo R.

    2015-04-01

    In the late years, much attention has been brought to the scientific community regarding the safety of sucralose and its industrial applications. Although it is the most used artificial sweetener in foods and pharmaceuticals, many questions still arise on its potential to form chlorinated byproducts in high temperatures, as demonstrated by several recent studies. In the present contribution, we use a combination of differential scanning calorimetry and thermogravimetric analysis coupled with infrared spectroscopy (DSC/TGA/IR), Hot-stage microscopy (HSM) and high-resolution mass spectrometry (HRMS) on samples submitted to water bath at mild temperatures to evaluate a broad spectrum of hazardous compounds formed in the degradation of this product. TGA/IR has revealed that there is effective decomposition in form of CO2 along with the formation of hydrogen chloride and other minor compounds. HSM results have provided accurate information, where the melting of the crystals was observed, followed by decomposition. Chlorinated derivatives, including polychlorinated aromatic hydrocarbons (PCAHs) were also confirmed by HRMS. These findings not only corroborate the suspected instability of sucralose to high temperatures, but also indicate that even exposed to mild conditions the formation of hazardous polychlorinated compounds is observed.

  20. Thermal degradation behaviour of nanoamphiphilic chitosan dispersed poly (lactic acid) bionanocomposite films.

    Science.gov (United States)

    Pal, Akhilesh Kumar; Katiyar, Vimal

    2017-02-01

    In the present study, nano-amphiphilic chitosan termed as chitosan-grafted-oligo l-lactic acid (CH-g-OLLA), is synthesized by microwave initiated insitu condensation polymerization. The synthesized CH-g-OLLA becomes hydrophobic in nature due to chemical bond formation between chitosan backbone and OLLA chains. Further, CH-g-OLLA (30%) bionanocomposite is used as a nanofiller in poly (lactic acid)/chitosan-grafted-oligo l-lactic acid (PLA/CH-g-OLLA) bionanocomposite films. Surface morphology shows a homogeneous dispersion of CH-g-OLLA in the form of spherical aggregates, which vary in the range of ∼20 to 150nm. Non-isothermal degradation kinetics, proposed by Kissinger, Kissinger-Akahira-Sunose, Flynn-Wall-Ozawa and Augis & Bennett models, are utilized to estimate the activation energies (Ea) for PLA, which are 254.1, 260.2, 257.0 and 259.1kJmol-1 respectively. The reduction in Ea values of bionanocomposite films may be elucidated by intermolecular distance and enrichment in chain mobility. The evolved gaseous products like hydrocarbons, carbon dioxide, carbon monoxide and cyclic oligomers are successfully identified with TG-FTIR analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Production and regulation of lignin degrading enzymes from ...

    African Journals Online (AJOL)

    The importance of mycelia extension and enhanced enzyme production has biotechnological applications in wood and pulp, textile and tanning, as well as in oil industries. Key words: Basidiomycetes, Lentinus squarrosulus, Psathyrella atroumbonata, ligninase, cofactors. African Journal of Biotechnology Vol.2(11) 2003: ...

  2. In vitro degradability and gas production parameters of Sericea ...

    African Journals Online (AJOL)

    Sericea lespedeza (Lespedeza cuneata) regrowth was harvested at early (ELP) or late (LLP) flowering stages, mixed with varying types and levels of roughage and fermented for 72 h in vitro, using the gas production (GP) technique. The roughage : lespedeza ratios were 100:0, 80:20, 60:40, 40:60, 20:80 and 0:100.

  3. Anaerobic testosterone degradation in Steroidobacter denitrificans - Identification of transformation products

    Energy Technology Data Exchange (ETDEWEB)

    Fahrbach, Michael, E-mail: michael.fahrbach@web.d [Eawag, Swiss Federal Institute of Aquatic Science and Technology, Uberlandstrasse 133, P.O. Box 611, CH-8600 Duebendorf (Switzerland); Krauss, Martin, E-mail: martin.krauss@eawag.c [Eawag, Swiss Federal Institute of Aquatic Science and Technology, Uberlandstrasse 133, P.O. Box 611, CH-8600 Duebendorf (Switzerland); Preiss, Alfred, E-mail: alfred.preiss@item.fraunhofer.d [Fraunhofer Institute of Toxicology and Experimental Medicine (ITEM), Nikolai-Fuchs-Strasse 1, D-30625 Hannover (Germany); Kohler, Hans-Peter E., E-mail: hkohler@eawag.c [Eawag, Swiss Federal Institute of Aquatic Science and Technology, Uberlandstrasse 133, P.O. Box 611, CH-8600 Duebendorf (Switzerland); Hollender, Juliane, E-mail: juliane.hollender@eawag.c [Eawag, Swiss Federal Institute of Aquatic Science and Technology, Uberlandstrasse 133, P.O. Box 611, CH-8600 Duebendorf (Switzerland)

    2010-08-15

    The transformation of the androgenic steroid testosterone by gammaproteobacterium Steroidobacter denitrificans was studied under denitrifying conditions. For the first time, growth experiments showed that testosterone was mineralized under consumption of nitrate and concurrent biomass production. Experiments with cell suspensions using [4-{sup 14}C]-testosterone revealed the intermediate production of several transformation products (TPs). Characterisation of ten TPs was carried out by means of HPLC coupled to high resolution mass spectrometry with atmospheric pressure chemical ionization as well as {sup 1}H and {sup 13}C NMR spectroscopy. 3{beta}-hydroxy-5{alpha}-androstan-17-one (trans-androsterone) was formed in the highest amount followed by 5{alpha}-androstan-3,17-dione. The data suggests that several dehydrogenation and hydrogenation processes take place concurrently in ring A and D because no consistent time-resolved pattern of TP peaks was observed and assays using 2 TPs as substrates resulted in essentially the same TPs. The further transformation of testosterone in S. denitrificans seems to be very efficient and fast without formation of detectable intermediates. - Testosterone is completely mineralized by Steroidobacter denitrificans under denitrifying conditions with initial formation of several reduced and oxidized transformation products.

  4. The Impact of Charcoal Production on Forest Degradation: a Case Study in Tete, Mozambique

    Science.gov (United States)

    Sedano, F.; Silva. J. A.; Machoco, R.; Meque, C. H.; Sitoe, A.; Ribeiro, N.; Anderson, K.; Ombe, Z. A.; Baule, S. H.; Tucker, C. J.

    2016-01-01

    Charcoal production for urban energy consumption is a main driver of forest degradation in sub-Saharan Africa. Urban growth projections for the continent suggest that the relevance of this process will increase in the coming decades. Forest degradation associated to charcoal production is difficult to monitor and commonly overlooked and underrepresented in forest cover change and carbon emission estimates. We use a multi-temporal dataset of very high-resolution remote sensing images to map kiln locations in a representative study area of tropical woodlands in central Mozambique. The resulting maps provided a characterization of the spatial extent and temporal dynamics of charcoal production. Using an indirect approach we combine kiln maps and field information on charcoal making to describe the magnitude and intensity of forest degradation linked to charcoal production, including aboveground biomass and carbon emissions. Our findings reveal that forest degradation associated to charcoal production in the study area is largely independent from deforestation driven by agricultural expansion and that its impact on forest cover change is in the same order of magnitude as deforestation. Our work illustrates the feasibility of using estimates of urban charcoal consumption to establish a link between urban energy demands and forest degradation. This kind of approach has potential to reduce uncertainties in forest cover change and carbon emission assessments in sub-Saharan Africa.

  5. Validated stability indicating methods for determination of nitazoxanide in presence of its degradation products*

    Science.gov (United States)

    Ali, Nouruddin W.; Abbas, Samah Sayed; Zaazaa, Hala El-Sayed; Abdelrahman, Maha Mohamed; Abdelkawy, Mohamed

    2011-01-01

    Three sensitive, selective and reproducible stability-indicating methods are presented for determination of nitazoxanide (NTZ), a new anti-protozoal drug, in presence of its degradation products. Method A utilizes the first derivative of ratio spectra spectrophotometry by measurement of the amplitude at 364.4 nm using one of the degradation products as a divisor. Method B is a chemometric-assisted spectrophotometry, where principal component regression (PCR) and partial least squares (PLS) were applied. These two approaches were successfully applied to quantify NTZ in presence of degradation products using the information included in the absorption spectra in the range 260–360 nm. Method C is based on the separation of NTZ from its degradation products followed by densitometric measurement of the bands at 254 nm. The separation was carried out on silica gel 60F254, using chloroform–methanol–ammonia solution–glacial acetic acid (95:5:1:1 by volume, pH=5.80) as a developing system. These methods are suitable as stability-indicating methods for the determination of NTZ in presence of its degradation products either in bulk powder or in pharmaceutical formulations. Statistical analysis of the results has been carried out revealing high accuracy and good precision. PMID:29403729

  6. Improved keratinase production for feather degradation by Bacillus ...

    African Journals Online (AJOL)

    ... to optimize concentrations of glucose, corn steep flour and K2HPO4 for further improvement of keratinase productivity showed that the optimal medium was composed of glucose (20 g/l), corn steep flour (7.5 g/l), K2HPO4 (1 g/l) and feather (20 g/l). The result of submerged batch cultivation of B. licheniformis ZJUEL31410 ...

  7. On thermal gravitational contribution to particle production and dark matter

    Directory of Open Access Journals (Sweden)

    Yong Tang

    2017-11-01

    Full Text Available We investigate the particle production from thermal gravitational annihilation in the very early universe, which is an important contribution for particles that might not be in thermal equilibrium or/and might only have gravitational interaction, such as dark matter (DM. For particles with spin 0,1/2 and 1 we calculate the relevant cross sections through gravitational annihilation and give the analytic formulas with full mass-dependent terms. We find that DM with mass between TeV and 1016 GeV could have the relic abundance that fits the observation, with small dependence on its spin. We also discuss the effects of gravitational annihilation from inflatons. Interestingly, contributions from inflatons could be dominant and have the same power dependence on Hubble parameter of inflation as that from vacuum fluctuation. Also, fermion production from inflaton, in comparison to boson, is suppressed by its mass due to helicity selection.

  8. Evaluation of anaerobic degradation, biogas and digestate production of cereal silages using nylon-bags.

    Science.gov (United States)

    Negri, Marco; Bacenetti, Jacopo; Fiala, Marco; Bocchi, Stefano

    2016-06-01

    In this study, the degradation efficiency and the biogas and digestate production during anaerobic digestion were evaluated for the cereal silages most used to feed biogas plants. To this purpose, silages of: maize from the whole plant, maize from the ear, triticale and wheat were digested, inside of nylon bags, in laboratory scale digesters, for 75days. Overall, the test involved 288 nylon bags. After 75days of digestion, the maize ear silage shows the highest degradation efficiency (about 98%) while wheat silage the lowest (about 83%). The biogas production ranges from 438 to 852Nm(3)/t of dry matter for wheat and ear maize silage, respectively. For all the cereal silages, the degradation as well as the biogas production are faster at the beginning of the digestion time. Digestate mass, expressed as percentage of the fresh matter, ranges from 38% to 84% for wheat and maize ear silage, respectively. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Identification and ecotoxicity of degradation products of chloroacetamide herbicides from UV-treatment of water

    DEFF Research Database (Denmark)

    Souissi, Yasmine; Bouchonnet, Stéphane; Bourcier, Sophie

    2013-01-01

    waters. In this study the formation of degradation products from ultraviolet (UV) treatment of the three chloroacetamide herbicides acetochlor, alachlor and metolachlor and their biological effects were investigated. UV treatment is mainly used for disinfection in water and wastewater treatments. First...... photoproducts formed by UV-treatment until 90% of the original pesticide was converted was compared to the toxicity of chloroacetamides using the green alga Pseudokirchneriella subcapitata, the crustacean Daphnia magna and the marine bacteria Vibrio fischeri as test organisms. UV-treatment of alachlor......The widespread occurrence of chlorinated herbicides and their degradation products in the aquatic environment raises health and environmental concerns. As a consequence pesticides, and to a lesser degree their degradation products, are monitored by authorities both in surface waters and drinking...

  10. The Products of the Thermal Decomposition of CH3CHO

    Energy Technology Data Exchange (ETDEWEB)

    Vasiliou, AnGayle; Piech, Krzysztof M.; Zhang, Xu; Nimlos, Mark R.; Ahmed, Musahid; Golan, Amir; Kostko, Oleg; Osborn, David L.; Daily, John W.; Stanton, John F.; Ellison, G. Barney

    2011-04-06

    We have used a heated 2 cm x 1 mm SiC microtubular (mu tubular) reactor to decompose acetaldehyde: CH3CHO + DELTA --> products. Thermal decomposition is followed at pressures of 75 - 150 Torr and at temperatures up to 1700 K, conditions that correspond to residence times of roughly 50 - 100 mu sec in the mu tubular reactor. The acetaldehyde decomposition products are identified by two independent techniques: VUV photoionization mass spectroscopy (PIMS) and infrared (IR) absorption spectroscopy after isolation in a cryogenic matrix. Besides CH3CHO, we have studied three isotopologues, CH3CDO, CD3CHO, and CD3CDO. We have identified the thermal decomposition products CH3(PIMS), CO (IR, PIMS), H (PIMS), H2 (PIMS), CH2CO (IR, PIMS), CH2=CHOH (IR, PIMS), H2O (IR, PIMS), and HC=CH (IR, PIMS). Plausible evidence has been found to support the idea that there are at least three different thermal decomposition pathways for CH3CHO: Radical decomposition: CH3CHO + DELTA --> CH3 + [HCO] --> CH3 + H + CO Elimination: CH3CHO + DELTA --> H2 + CH2=C=O. Isomerization/elimination: CH3CHO + DELTA --> [CH2=CH-OH] --> HC=CH + H2O. Both PIMS and IR spectroscopy show compelling evidence for the participation of vinylidene, CH2=C:, as an intermediate in the decomposition of vinyl alchohol: CH2=CH-OH + DELTA --> [CH2=C:] + H2O --> HC=CH + H2O.

  11. Application of thermal analysis methods on the study of PE thermal degradation and the influence of Mg (OH) sub 2 as fire retardant

    CERN Document Server

    Zarringhalam-Moghaddam, A

    2002-01-01

    Fire retardation effects of Mg(OH) sub 2 on PE was studied utilizing DTA, TGA and DSC methods. Reductions on reaction peak area and mass loss rate with the addition of Mg(OH) sub 2 were observed as indication of retardation effects of Mg(OH) sub 2 on PE. Cone calorimeter tests were performed on samples to verify the thermo analytical results. It was concluded that when Mg(OH) sub 2 is present it effectively modified the degradation behavior of PE and the thermal analyses are useful and rapid methods to study the retardation effects.

  12. Determination of the Thermal Resistance of Pipe Insulation Material from Thermal Conductivity of Flat Insulation Products

    OpenAIRE

    Koenen, Alain; Marquis, Damien M.

    2015-01-01

    New European product standards now include a mandatory requirement for manufacturers to declare the temperature-dependent thermal conductivity for each insulation used in building equipments and industrial installations. For pipe insulation systems, the measurement is usually performed by a standard pipe test method, in which the value on a large temperature range is integrated to reduce temperature range and improve temperature measurement control. The alternative proposed in this article co...

  13. Thermal engineering cuts energy use to speed production

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1999-05-01

    This article gives details of energy saving designs in manufacturing processes implemented by Mannings Thermal and Environmental Engineers of Southport. Descriptions are given of reduced energy consumption and increased production resulting from the thermoforming tool presses used in producing car trim; the introduction of heating units to preheat moulding tools in the production of high performance rubber seals; the simultaneous controlled heating of several metal tools with low voltage ceramic heating elements set in the brickwork housing having a motorised insulated cover forming a sealed heating chamber; and the conversion of a brick lined hearth furnace from electric to gas using hard wearing firebricks, gas burners, and forced cooling system. (UK)

  14. Degradation of histamine by Bacillus polymyxa isolated from salted fish products

    Directory of Open Access Journals (Sweden)

    Yi-Chen Lee

    2015-12-01

    Full Text Available Histamine is the causative agent of scombroid poisoning, a foodborne chemical hazard. Histamine is degraded by the oxidative deamination activity of certain microorganisms. In this study, eight histamine-degrading bacteria isolated from salted fish products were identified as Rummeliibacillus stabekisii (1 isolate, Agrobacterium tumefaciens (1 isolate, Bacillus cereus (2 isolates, Bacillus polymyxa (1 isolate, Bacillus licheniformis (1 isolate, Bacillus amyloliquefaciens (1 isolate, and Bacillus subtilis (1 isolate. Among them, B. polymyxa exhibited the highest activity in degrading histamine than the other isolates. The ranges of temperature, pH, and salt concentration for growth and histamine degradation of B. polymyxa were 25–37°C, pH 5–9, and 0.5–5% NaCl, respectively. B. polymyxa exhibited optimal growth and histamine-degrading activity at 30°C, pH 7, and 0.5% NaCl in histamine broth for 24 hours of incubation. The histamine-degrading isolate, B. polymyxa, might be used as a starter culture in inhibiting histamine accumulation during salted fish product fermentation.

  15. Selective separation and characterisation of stress degradation products and process impurities of prucalopride succinate by LC-QTOF-MS/MS.

    Science.gov (United States)

    Mahamuni, Baira Shandilya; Jajula, Anupama; Awasthi, Atul; Kalariya, Pradipbhai D; Talluri, M V N Kumar

    2016-06-05

    The present study reports the degradation behaviour of a new prokinetic agent, Prucalopride succinate, under various stress conditions as per International Conference on Harmonization guidelines (ICH, Q1A (R2)). The investigation involved monitoring decomposition of the drug under hydrolytic (acidic, basic and neutral), oxidative, photolytic and thermal stress conditions followed by characterization of the degradation products (DPs) and process related impurities (IMPs). A rapid, precise, accurate and robust reverse phase high performance liquid chromatography (RP-HPLC) method has been developed involving mobile phase of 20mM ammonium bicarbonate buffer and acetonitrile: methanol (80:20v/v) on a Waters Xbridge-C8 (150mm×4.6mm i.d., 3.5μm) column using gradient elution. The drug was found to be degraded in hydrolytic (acidic) and oxidative conditions, whereas it was stable under basic and neutral hydrolytic, photolytic and thermal stress conditions. The method was extended to LC-ESI-QTOF-MS/MS for the structural characterization of DPs and process related IMPs. Structural characterization was carried out based on the generated molecular formula of DPs and its fragment ions. It has been observed that two major DPs were formed under each acid hydrolysis and oxidative stress conditions. The most probable mechanisms involved in the formation of DPs were also proposed. Finally, the method was validated in the term of specificity, linearity, accuracy, precision, and robustness as per ICH guidelines, Q2 (R1). Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Estimating grass and grass silage degradation characteristics by in situ and in vitro gas production methods

    Directory of Open Access Journals (Sweden)

    Danijel Karolyi

    2010-01-01

    Full Text Available Fermentation characteristics of grass and grass silage at different maturities were studied using in situ and in vitro gas production methods. In situ data determined difference between grass and silage. Degradable fraction decreased as grass matured while the undegradable fraction increased. Rate of degradation (kd was slower for silage than fresh grass. Gas production method (GP data showed that fermentation of degradable fraction was different between stage of maturity in both grass and silage. Other data did not show any difference with the exception for the rate of GP of soluble and undegradable fraction. The in situ degradation characteristics were estimated from GP characteristics. The degradable and undegradable fractions could be estimated by multiple relationships. Using the three-phases model for gas production kd and fermentable organic matter could be estimated from the same parameters. The only in situ parameter that could not be estimated with GP parameters was the soluble fraction. The GP method and the three phases model provided to be an alternative to the in situ method for animal feed evaluations.

  17. The effects of grassland degradation on plant diversity, primary productivity, and soil fertility in the alpine region of Asia's headwaters.

    Science.gov (United States)

    Wang, Xuexia; Dong, Shikui; Yang, Bing; Li, Yuanyuan; Su, Xukun

    2014-10-01

    A 3-year survey was conducted to explore the relationships among plant composition, productivity, and soil fertility characterizing four different degradation stages of an alpine meadow in the source region of the Yangtze and Yellow Rivers, China. Results showed that plant species diversity, productivity, and soil fertility of the top 30-cm soil layer significantly declined with degradation stages of alpine meadow over the study period. The productivity of forbs significantly increased with degradation stages, and the soil potassium stock was not affected by grassland degradation. The vegetation composition gradually shifted from perennial graminoids (grasses and sedges) to annual forbs along the degradation gradient. The abrupt change of response in plant diversity, plant productivity, and soil nutrients was demonstrated after heavy grassland degradation. Moreover, degradation can indicate plant species diversity and productivity through changing soil fertility. However, the clear relationships are difficult to establish. In conclusion, degradation influenced ecosystem function and services, such as plant species diversity, productivity, and soil carbon and nitrogen stocks. Additionally, both plant species diversity and soil nutrients were important predictors in different degradation stages of alpine meadows. To this end, heavy degradation grade was shown to cause shift of plant community in alpine meadow, which provided an important basis for sustaining ecosystem function, manipulating the vegetation composition of the area and restoring the degraded alpine grassland.

  18. Gas chromatographic-mass spectrometric analysis of some potential toxicants amongst volatile compounds emitted during large-scale thermal degradation of poly(acrylonitrile-butadiene-styrene) plastic.

    Science.gov (United States)

    Shapi, M M; Hesso, A

    1991-01-02

    A number of compounds emitted during the thermal degradation of plastics are potentially toxic. This study was aimed at identifying the volatile compounds emitted during large-scale thermal degradation of poly(acrylonitrile-butadiene-styrene). About 5 g of the sample were degraded at between 25 and 470 degrees C in air and nitrogen in a device that can simulate temperature-programmed thermogravimetry. The volatiles were collected in dichloromethane using the solvent trap technique. Some of the 92 compounds identified by gas chromatography-mass spectrometry were found to have no hitherto documented toxicological profiles, even though they are potentially dangerous.

  19. Thermal evolution of the Schwinger model with matrix product operators

    Energy Technology Data Exchange (ETDEWEB)

    Banuls, M.C.; Cirac, J.I. [Max-Planck-Institut fuer Quantenoptik, Garching (Germany); Cichy, K. [Frankfurt am Main Univ. (Germany). Inst. fuer Theoretische Physik; Poznan Univ. (Poland). Faculty of Physics; DESY Zeuthen (Germany). John von Neumann-Institut fuer Computing (NIC); Jansen, K.; Saito, H. [DESY Zeuthen (Germany). John von Neumann-Institut fuer Computing (NIC)

    2015-10-15

    We demonstrate the suitability of tensor network techniques for describing the thermal evolution of lattice gauge theories. As a benchmark case, we have studied the temperature dependence of the chiral condensate in the Schwinger model, using matrix product operators to approximate the thermal equilibrium states for finite system sizes with non-zero lattice spacings. We show how these techniques allow for reliable extrapolations in bond dimension, step width, system size and lattice spacing, and for a systematic estimation and control of all error sources involved in the calculation. The reached values of the lattice spacing are small enough to capture the most challenging region of high temperatures and the final results are consistent with the analytical prediction by Sachs and Wipf over a broad temperature range.

  20. Thermal design of a Mars oxygen production plant

    Science.gov (United States)

    Sridhar, K. R.; Iyer, Venkatesh A.

    1991-01-01

    The optimal design of the thermal components of a system that uses carbon dioxide from the Martian atmosphere to produce oxygen for spacecraft propulsion and/or life support is discussed. The gases are pressurized, heated and passed through an electrochemical cell. Carbon dioxide is reduced to carbon monoxide and oxygen due to thermal dissociation and electrocatalysis. The oxygen thus formed is separated from the gas mixture by the electrochemical cell. The objective of the design is to optimize both the overall mass and the power consumption of the system. The analysis shows that at electrochemical cell efficiencies of about 50 percent and lower, the optimal system would require unspent carbon dioxide in the exhaust gases to be separated and recycled. Various methods of efficiently compressing the intake gases to system pressures of 0.1 MPa are investigated. The total power requirement for oxygen production rates of 1, 5, and 10 kg/day at various cell efficiencies are presented.

  1. Fundamental understanding of the thermal degradation mechanisms of waste tires and their air pollutant generation in a N2 atmosphere.

    Science.gov (United States)

    Kwon, Eilhann; Castaldi, Marco J

    2009-08-01

    The thermal decomposition of waste tires has been characterized via thermo-gravimetric analysis (TGA) tests, and significant mass loss has been observed between 300 and 500 degrees C. A series of gas chromatography-mass spectrometer (GC-MS) measurements, in which the instrument was coupled to a TGA unit, have been carried out to investigate the thermal degradation mechanisms as well as the air pollutant generation including volatile organic carbons (VOCs) and polycyclic aromatic hydrocarbons (PAHs) in a nitrogen atmosphere. In order to understand fundamental information on the thermal degradation mechanisms of waste tires, the main constituents of tires, poly-isoprene rubber (IR) and styrene butadiene rubber (SBR), have been studied under the same conditions. All of the experimental work indicated that the bond scission on each monomer of the main constituents of tires was followed by hydrogenation and gas phase reactions. This helped to clarify the independent pathways and species attributable to IR and SBR during the pyrolysis process. To extend that understanding to a more practical level, a flow-through reactor was used to test waste tire, SBR and IR samples in the temperature range of 500-800 degrees C at a heating rate of approximately 200 degrees C. Lastly, the formation of VOCs (approximately 1-50 PPMV/10 mg of sample) and PAHs (approximately 0.2-7 PPMV/10 mg of sample) was observed at relatively low temperatures compared to conventional fuels, and its quantified concentration was significantly high due to the chemical structure of SBR and IR. The measurement of chemicals released during pyrolysis suggests not only a methodology for reducing the air pollutants but also the feasibility of petrochemical recovery during thermal treatment.

  2. Degradation and adsorption of selected pharmaceuticals and personal care products (PPCPs) in agricultural soils.

    Science.gov (United States)

    Xu, Jian; Wu, Laosheng; Chang, Andrew C

    2009-11-01

    Pharmaceuticals and personal care products (PPCPs) are emerging contaminants in the environment, which have drawn popular concerns recently. Most studies on the environmental fate of PPCPs have focused on their behaviors during wastewater treatment processes, in aquatic environments, and in the sludge, however, little is known about their behavior in agricultural soils. In this study, adsorption and degradation of six selected PPCPs, including clofibric acid, ibuprofen, naproxen, triclosan, diclofenac and bisphenol A have been investigated in the laboratory using four US agricultural soils associated with reclaimed wastewater reuse. Adsorption test using a batch equilibrium method demonstrated that adsorption of all tested chemicals in soils could be well described with Freundlich equation, and their adsorption affinity on soil followed the order of triclosan>bisphenol A>clofibric acid>naproxen>diclofenac>ibuprofen. Retardation factor (R(F)) suggested that ibuprofen had potential to move downward with percolating water, while triclosan and bisphenol A were readily retarded in soils. Degradation of selected PPCPs in soils generally followed first-order exponential decay kinetics, with half-lives ranging from 0.81 to 20.44 d. Degradation of PPCPs in soils appeared to be influenced by the soil organic matter and clay contents. Sterilization generally decreased the degradation rates, indicating microbial activity played a significant role in the degradation in soils. The degradation rate constant decreased with increasing initial chemical concentrations in soil, implying that the microbial activity was inhibited with high chemical loading levels.

  3. The Sustainable Release of Vancomycin and Its Degradation Products From Nanostructured Collagen/Hydroxyapatite Composite Layers

    Czech Academy of Sciences Publication Activity Database

    Suchý, Tomáš; Šupová, Monika; Klapková, E.; Horný, L.; Rýglová, Šárka; Žaloudková, Margit; Braun, Martin; Sucharda, Zbyněk; Ballay, R.; Veselý, J.; Chlup, H.; Denk, František

    2016-01-01

    Roč. 105, č. 3 (2016), 1288-1294 ISSN 0022-3549 R&D Projects: GA TA ČR(CZ) TA04010330 Institutional support: RVO:67985891 Keywords : anti-infectives * HPLC * coating * controlled release * degradation products * drug delivery systems * nanoparticles * pharmacokinetics * polymeric drug delivery systems Subject RIV: JI - Composite Materials Impact factor: 2.713, year: 2016

  4. Global sensitivity analysis for UNSATCHEM simulations of crop production with degraded waters

    Science.gov (United States)

    One strategy for maintaining irrigated agricultural productivity in the face of diminishing resource availability is to make greater use of marginal quality waters and lands. A key to sustaining systems using degraded irrigation waters is salinity management. Advanced simulation models and decision ...

  5. Enhanced production of dimethyl phthalate-degrading strain Bacillus sp. QD14 by optimizing fermentation medium

    Directory of Open Access Journals (Sweden)

    Jixian Mo

    2015-05-01

    Conclusion: In this work, the key factors affected by the fermentation of DMP-degrading strain Bacillus sp. QD14 were optimized by PBD, SAM and BBD (RSM; the yield was increased by 57,11% in the conditions in our study. We propose that the conditions optimized in the study can be applied to the fermentation for commercialization production.

  6. Granular soil structure indicates reclamation of degraded to productive soils: a case study in southeast Spain

    NARCIS (Netherlands)

    Arocena, J.M.; van Mourik, J.M.; Faz Cano, A.

    2012-01-01

    Accelerated conversion of degraded landscapes in mining areas to productive ecosystems requires stimulation of soil formation. The evolution in microstructure and changes to chemical properties in metal mine wastes 5 yr after amendments with pig manure, sewage sludge and marble waste is reported.

  7. Mechanical property degradation and microstructural evolution of cast austenitic stainless steels under short-term thermal aging

    Energy Technology Data Exchange (ETDEWEB)

    Lach, Timothy G.; Byun, Thak Sang; Leonard, Keith J.

    2017-12-01

    Mechanical testing and microstructural characterization were performed on short-term thermally aged cast austenitic stainless steels (CASS) to understand the severity and mechanisms of thermal-aging degradation experienced during extended operation of light water reactor (LWR) coolant systems. Four CASS materials – CF3, CF3M, CF8, and CF8M – were thermally aged for 1500 hours at 290 °C, 330 °C, 360 °C, and 400 °C. All four alloys experienced insignificant change in strength and ductility properties but a significant reduction in absorbed impact energy. The primary microstructural and compositional changes during thermal aging were spinodal decomposition of the δ-ferrite into α/ α`, precipitation of G-phase in the δ-ferrite, segregation of solute to the austenite/ ferrite interphase boundary, and growth of M23C6 carbides on the austenite/ferrite interphase boundary. These changes were shown to be highly dependent on chemical composition, particularly the concentration of C and Mo, and aging temperature. A comprehensive model is being developed to correlate the microstructural evolution with mechanical behavior and simulation for predictive evaluations of LWR coolant system components.

  8. Thermal and spectroscopic analysis of organic matter degradation and humification during composting of pig slurry in different scenarios.

    Science.gov (United States)

    Martín-Mata, J; Lahoz-Ramos, C; Bustamante, M A; Marhuenda-Egea, F C; Moral, R; Santos, A; Sáez, J A; Bernal, M P

    2016-09-01

    In this work, different analytical techniques (thermal analysis, (13)C cross-polarization magic angle spinning (CPMAS) NMR and Fourier transform infrared (FT-IR) spectroscopy) have been used to study the organic matter changes during the co-composting of pig slurry with cotton gin waste. To ensure the validity of the findings, the composting process was developed in different scenarios: under experimental pilot plant conditions, using the static pile system, and under real conditions on a pig farm, using the turning pile system. Also, the thermal stability index (R1) was determined before and after an extraction with water, to evaluate the effect of eliminating water-soluble inorganic salts on the thermal analysis. The results of the thermal methods showed the degradation of the most labile organic matter during composting; R1 increased during composting in all piles, without any influence of the presence of water-soluble inorganic ions in the sample. The NMR showed a decrease in the abundance of the carbohydrate molecules and an increase in the aliphatic materials during composting, due to a concentration effect. Also, FT-IR spectroscopy was a useful technique to study the trends of polysaccharides and nitrate, as indicators of organic matter transformations during composting.

  9. Liquid chromatography-tandem mass spectrometry characterization of ergocristam degradation products.

    Science.gov (United States)

    Olsovská, Jana; Sulc, Miroslav; Novák, Petr; Pazoutová, Sylvie; Flieger, Miroslav

    2008-10-01

    The UPLC method with diode array UV detection was developed for qualitative determination of ergocristine and ergocristam including degradation products. The mechanism of the ergocristam disruptive reaction was described based on MS/MS characterization of ammonolytic product, N-(d-lysergyl)-l-valinamide (A1) and two methanolytic products, methyl ester of N-(d-lysergyl)-l-valine (M2), and N-[N-(d-lysergyl)-l-valyl]-l-phenylalanyl-d-prolyl methyl ester (M1). The influence of extraction conditions on epimerization and degradation of ergocristine and ergocristam was tested and conditions for reproducible decomposition of ergocristam were found. The presented method could potentially be applied for ergot alkaloids determination in sclerotia, fermentation broth, mycelium, and possibly contaminated food products, i.e. corn, flour, bread, etc., and feeding stuffs containing ungrounded cereals.

  10. A Co-Citation Analysis on Thermal Comfort and Productivity Aspects in Production and Office Buildings

    Directory of Open Access Journals (Sweden)

    Mariantonietta Tarantini

    2017-05-01

    Full Text Available In this work, the literature about the relationship between thermal comfort and productivity in workplaces is reviewed and explored by means of a co-citation analysis—i.e., a factor analysis applied to the mutual citations of the most relevant contributions. A structure of three main clusters of papers describing the relationships between workers’ thermal comfort and productivity were identified according to the factor analysis and then confirmed with a multidimensional scaling. Results indicate that comfortable indoor thermal conditions can have beneficial impacts on workers’ well-being and productivity, such as higher operational rates, lower production losses, fewer sick leaves, and reduced health related costs. Some authors proposed analytical and empirical expressions for the quantification of the impact of thermal comfort on productivity; nevertheless, due to the broad spectrum of activities and their applicability, the literature is still far from reaching a general consensus on the potential impact of comfort/discomfort on productivity and proposed models can vary significantly in the different studies.

  11. Enhanced sulfamethoxazole degradation through ammonia oxidizing bacteria co-metabolism and fate of transformation products.

    Science.gov (United States)

    Kassotaki, Elissavet; Buttiglieri, Gianluigi; Ferrando-Climent, Laura; Rodriguez-Roda, Ignasi; Pijuan, Maite

    2016-05-01

    The occurrence of the widely-used antibiotic sulfamethoxazole (SFX) in wastewaters and surface waters has been reported in a large number of studies. However, the results obtained up-to-date have pointed out disparities in its removal. This manuscript explores the enhanced biodegradation potential of an enriched culture of Ammonia Oxidizing Bacteria (AOB) towards SFX. Several sets of batch tests were conducted to establish a link between SFX degradation and specific ammonia oxidation rate. The occurrence, degradation and generation of SFX and some of its transformation products (4-Nitro SFX, Desamino-SFX and N(4)-Acetyl-SFX) was also monitored. A clear link between the degradation of SFX and the nitrification rate was found, resulting in an increased SFX removal at higher specific ammonia oxidation rates. Moreover, experiments conducted under the presence of allylthiourea (ATU) did not present any removal of SFX, suggesting a connection between the AMO enzyme and SFX degradation. Long term experiments (up to 10 weeks) were also conducted adding two different concentrations (10 and 100 μg/L) of SFX in the influent of a partial nitrification sequencing batch reactor, resulting in up to 98% removal. Finally, the formation of transformation products during SFX degradation represented up to 32%, being 4-Nitro-SFX the most abundant. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Structure elucidation and in vitro cytotoxicity of ochratoxin α amide, a new degradation product of ochratoxin A.

    Science.gov (United States)

    Bittner, Andrea; Cramer, Benedikt; Harrer, Henning; Humpf, Hans-Ulrich

    2015-05-01

    The mycotoxin ochratoxin A is a secondary metabolite occurring in a wide range of commodities. During the exposure of ochratoxin A to white and blue light, a cleavage between the carbon atom C-14 and the nitrogen atom was described. As a reaction product, the new compound ochratoxin α amide has been proposed based on mass spectrometry (MS) experiments. In the following study, we observed that this compound is also formed at high temperatures such as used for example during coffee roasting and therefore represents a further thermal ochratoxin A degradation product. To confirm the structure of ochratoxin α amide, the compound was prepared in large scale and complete structure elucidation via nuclear magnetic resonance (NMR) and MS was performed. Additionally, first studies on the toxicity of ochratoxin α amide were performed using immortalized human kidney epithelial (IHKE) cells, a cell line known to be sensitive against ochratoxin A with an IC50 value of 0.5 μM. Using this system, ochratoxin α amide revealed no cytotoxicity up to concentrations of 50 μM. Thus, these results propose that the thermal degradation of ochratoxin A to ochratoxin α amide might be a detoxification process. Finally, we present a sample preparation and a HPLC-tandem mass spectrometry (HPLC-MS/MS) method for the analysis of ochratoxin α amide in extrudates and checked its formation during the extrusion of artificially contaminated wheat grits at 150 and 180 °C, whereas no ochratoxin α amide was detectable under these conditions.

  13. Determination of membrane degradation products in the product water of polymer electrolyte membrane fuel cells using liquid chromatography mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Zedda, Marco

    2011-05-12

    The predominant long term failure of polymer electrolyte membranes (PEM) is caused by hydroxyl radicals generated during fuel cell operation. These radicals attack the polymer, leading to chain scission, unzipping and consequently to membrane decomposition products. The present work has investigated decomposition products of novel sulfonated aromatic hydrocarbon membranes on the basis of a product water analysis. Degradation products from the investigated membrane type and the possibility to detect these compounds in the product water for diagnostic purposes have not been discovered yet. This thesis demonstrates the potential of solid phase extraction and liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS) for the extraction, separation, characterization, identification and quantification of membrane degradation products in the product water of fuel cells. For this purpose, several polar aromatic hydrocarbons with different functional groups were selected as model compounds for the development of reliable extraction, separation and detection methods. The results of this thesis have shown that mixed mode sorbent materials with both weak anion exchange and reversed phase retention properties are well suited for reproducible extraction of both molecules and ions from the product water. The chromatographic separation of various polar aromatic hydrocarbons was achieved by means of phase optimized liquid chromatography using a solvent gradient and on a C18 stationary phase. Sensitive and selective detection of model compounds could be successfully demonstrated by the analysis of the product water using tandem mass spectrometry. The application of a hybrid mass spectrometer (Q Trap) for the characterization of unknown polar aromatic hydrocarbons has led to the identification and confirmation of 4-hydroxybenzoic acid in the product water. In addition, 4-HBA could be verified as a degradation product resulting from PEM decomposition by hydroxyl radicals using an

  14. Kinetic study of the thermal hydrolysis of Agave salmiana for mezcal production.

    Science.gov (United States)

    Garcia-Soto, M J; Jimenez-Islas, H; Navarrete-Bolanos, J L; Rico-Martinez, R; Miranda-Lopez, R; Botello-Alvarez, J E

    2011-07-13

    The kinetics of the thermal hydrolysis of the fructans of Agave salmiana were determined during the cooking step of mezcal production in a pilot autoclave. Thermal hydrolysis was achieved at different temperatures and cooking times, ranging from 96 to 116 °C and from 20 to 80 h. A simple kinetic model of the depolymerization of fructans to monomers and other reducing sugars and of the degradation of reducing sugars to furans [principally 5-(hydroxymethyl)furfural, HMF] was developed. From this model, the rate constants of the reactions were calculated, as well as the pre-exponential factors and activation energies of the Arrhenius equation. The model was found to fit the experimental data well. The tradeoff between a maximum fructan hydrolysis and a critical furan concentration in allowing for the best ethanol yield during fermentation was investigated. The results indicated that the thermal hydrolysis of agave was optimal, from the point of view of ethanol yield in the ensuing fermentation, in the temperature range of 106-116 °C and the cooking range time of 6-14 h. The optimal conditions corresponded to a fructan hydrolysis of 80%, producing syrups with furan and reducing sugar concentrations of 1 ± 0.1 and 110 ± 10 g/L, respectively.

  15. The products of the thermal decomposition of CH3CHO.

    Science.gov (United States)

    Vasiliou, AnGayle; Piech, Krzysztof M; Zhang, Xu; Nimlos, Mark R; Ahmed, Musahid; Golan, Amir; Kostko, Oleg; Osborn, David L; Daily, John W; Stanton, John F; Ellison, G Barney

    2011-07-07

    We have used a heated 2 cm × 1 mm SiC microtubular (μtubular) reactor to decompose acetaldehyde: CH(3)CHO + Δ → products. Thermal decomposition is followed at pressures of 75-150 Torr and at temperatures up to 1675 K, conditions that correspond to residence times of roughly 50-100 μs in the μtubular reactor. The acetaldehyde decomposition products are identified by two independent techniques: vacuum ultraviolet photoionization mass spectroscopy (PIMS) and infrared (IR) absorption spectroscopy after isolation in a cryogenic matrix. Besides CH(3)CHO, we have studied three isotopologues, CH(3)CDO, CD(3)CHO, and CD(3)CDO. We have identified the thermal decomposition products CH(3) (PIMS), CO (IR, PIMS), H (PIMS), H(2) (PIMS), CH(2)CO (IR, PIMS), CH(2)=CHOH (IR, PIMS), H(2)O (IR, PIMS), and HC≡CH (IR, PIMS). Plausible evidence has been found to support the idea that there are at least three different thermal decomposition pathways for CH(3)CHO; namely, radical decomposition: CH(3)CHO + Δ → CH(3) + [HCO] → CH(3) + H + CO; elimination: CH(3)CHO + Δ → H(2) + CH(2)=C=O; isomerization∕elimination: CH(3)CHO + Δ → [CH(2)=CH-OH] → HC≡CH + H(2)O. An interesting result is that both PIMS and IR spectroscopy show compelling evidence for the participation of vinylidene, CH(2)=C:, as an intermediate in the decomposition of vinyl alcohol: CH(2)=CH-OH + Δ → [CH(2)=C:] + H(2)O → HC≡CH + H(2)O.

  16. Premature translational termination products are rapidly degraded substrates for MHC class I presentation.

    Directory of Open Access Journals (Sweden)

    Joshua R Lacsina

    Full Text Available Nearly thirty percent of all newly synthesized polypeptides are targeted for rapid proteasome-mediated degradation. These rapidly degraded polypeptides (RDPs are a source of antigenic substrates for the MHC class I presentation pathway, allowing for immunosurveillance of newly synthesized proteins by cytotoxic T lymphocytes. Despite the recognized role of RDPs in MHC I presentation, it remains unclear what molecular characteristics distinguish RDPs from their more stable counterparts. It has been proposed that premature translational termination products may constitute a form of RDP; indeed, in prokaryotes translational drop-off products are normal by-products of protein synthesis and are subsequently rapidly degraded. To study the cellular fate of premature termination products, we used the antibiotic puromycin as a means to experimentally manipulate prematurely terminated polypeptide production in human cells. At low concentrations, puromycin enhanced flux into rapidly degraded polypeptide pools, with small polypeptides being markedly more labile then high molecular weight puromycin adducts. Immunoprecipitation experiments using anti-puromycin antisera demonstrated that the majority of peptidyl-puromycins are rapidly degraded in a proteasome-dependent manner. Low concentrations of puromycin increased the recovery of cell surface MHC I-peptide complexes, indicating that prematurely terminated polypeptides can be processed for presentation via the MHC I pathway. In the continued presence of puromycin, however, MHC I export to the cell surface was inhibited, coincident with the accumulation of polyubiquitinated proteins. The time- and dose-dependent effects of puromycin suggest that the pool of peptidyl-puromycin adducts differ in their targeting to various proteolytic pathways that, in turn, differ in the efficiency with which they access the MHC I presentation machinery. These studies highlight the diversity of cellular proteolytic pathways

  17. In vitro degradation behaviour of biodegradable soy plastics : effects of crosslinking with glyoxal and thermal treatment

    NARCIS (Netherlands)

    Vaz, C.M.; Graaf, de L.A.; Reis, R.L.; Cunha, A.M.

    2003-01-01

    In-vitro degradation of soy-derived protein materials, non-crosslinked (SItp), crosslinked with glyoxal (X-SItp) or submitted to heat treatment (24TT-SItp), was studied with either an isotonic saline solution without enzymatic activity or containing bacterial collagenase. The changes in weight of

  18. Hydrolytic and thermal degradation of PCL and PCL/Bentonite compounds

    Energy Technology Data Exchange (ETDEWEB)

    Franca, Danyelle Campos; Bezerra, Elieber Barros; Morais, Dayanne Diniz de Souza; Araujo, Edcleide Maria [Universidade Federal de Campina grande (UFCG), PB (Brazil). Departamento de Engenharia de Materiais; Wellen, Renate Maria Ramos, E-mail: wellen.renate@gmail.com [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil). Departamento de Engenharia de Materiais

    2016-05-15

    Poly(ε-caprolactone)/montmorillonite (PCL/MMT) and Poly(εcaprolactone)/organo-modified montmorillonite (PCL/OMMT) compounds at 3% w/w clay content were prepared by melting mixing. The effect of MMT and OMMT on the degradability of PCL injected specimens was investigated in vacuum at 40 deg C for up to 45 days and in aqueous medium at 40 deg C for up to 45 days. Selected specimens were collected after 15, 30 and 45 days of exposure. Microstructural changes were monitored during the degradation experiment by means of melt flow rate (MFR), weight loss, X ray diffraction (XRD), mechanical properties, and scanning electron microscopy (SEM). PCL and its compounds revealed not to be prone to hydrolytic degradation with similar results for MFR of samples exposed in vacuum and water. Gain and loss of weight were observed during experiments, probably due to swelling mechanism taking place in two stages, with the amorphous phase being the first to be swelled followed by the crystalline one. By XRD a new peak corresponding to (002) plane was evident for PCL/OMMT. PCL proved to be resistant to degradation since experiments carried out in vacuum or in aqueous medium for up to 45 days were not enough to affect the mechanical integrity of PCL samples. (author)

  19. Thermal Contributions to the Degradation of Ground Laboratory and Space Irradiated Teflon

    Science.gov (United States)

    deGroh, Kim K.; Martin, Morgana

    2003-01-01

    The aluminized Teflon fluorinated ethylene propylene outer most layer of the multilayer insulation blankets on the Hubble Space Telescope has become embrittled resulting in severe on-orbit cracking. During the second servicing mission, a piece of aluminized fluorinated ethylene propylene was retrieved that had curled, exposing the back-surface aluminum to space. This extremely embrittled piece reached 200 C on-orbit, 150 C higher than the nominal temperature extreme. Therefore, experiments have been conducted to determine the effect of heating on the degradation of fluorinated ethylene propylene that has been irradiated in a ground laboratory facility or in space on Hubble Space Telescope. Samples of pristine, x-ray irradiated and Hubble Space Telescope retrieved fluorinated ethylene propylene were heat treated from 50 to 200 C at 25 C intervals in a high vacuum facility and tensile tested. Density measurements were also obtained. Results indicate that heating does not embrittle non-irradiated Teflon. However, there is a significant dependence of the embrittlement of irradiated Teflon on heating temperature, with near complete loss of elongation at 100 C and higher. Rate of degradation changes, which were consistent with the glass transition temperature for fluorinated ethylene propylene, were present in the data. The results support chain scission as the primary mechanism of degradation of fluorinated ethylene propylene on Hubble Space Telescope, and indicate the significance of the on-orbit temperature of fluorinated ethylene propylene with respect to its degradation in the space environment.

  20. Kinetics of the thermal degradation of patulin in the presence of ascorbic acid.

    Science.gov (United States)

    Kokkinidou, S; Floros, J D; LaBorde, L F

    2014-01-01

    Degradation of the mycotoxin patulin between 25 and 85 °C without and with added ascorbic acid was studied, and the effectiveness of linear and nonlinear models for predicting reaction rates was compared. In agreement with previous reports, ascorbic acid significantly increased (P ≤ 0.05) the rate of patulin degradation at all temperatures studied. The data for patulin degradation in the absence of ascorbic acid were adequately modeled using a zero-order linear kinetic model. However, the predictive abilities of zero and higher-order linear models were not adequate to describe the more complex reactions that likely occurred when ascorbic acid was added. In contrast, the nonlinear Weibull model adequately described the patulin-ascorbic acid reaction throughout the temperature range studied. Zero-order rate constants and Weibull scale values for each of the respective reactions followed the Arrhenius law. Activation energies of 58.7 ± 3.9 and 29.6 ± 1.9 kJ mol⁻¹ for the reaction without and with ascorbic acid, respectively, confirmed decreased patulin stability in the presence of ascorbic acid and suggested that the mechanisms for the 2 degradation reactions were different. © 2013 Institute of Food Technologists®

  1. Multistep kinetic behavior in the thermal degradation of poly(L-lactic acid): a physico-geometrical kinetic interpretation.

    Science.gov (United States)

    Yoshikawa, Masahiro; Goshi, Yuri; Yamada, Shuto; Koga, Nobuyoshi

    2014-09-25

    A physico-geometrical kinetic interpretation of the thermal degradation of poly(L-lactic acid) (PLLA) is described based on the results of a kinetic study using thermogravimetry (TG) and the microscopic observation of the reaction process. From the physico-geometrical viewpoint, the reaction process is separated into two different stages characterized by a surface reaction of the molten PLLA in the initial reaction stage followed by continuous bubble formation and disappearance in the established reaction stage. The generally reported trend of variation in the apparent activation energy as the reaction advances is explained by the partial overlapping of these two reaction stages. The kinetic rate data obtained using TG were kinetically separated into those for the respective reaction stages by optimizing the kinetic parameters. The significance of the kinetic results is discussed in terms of the physico-geometrical characteristics of the reaction. Such systematic kinetic analyses demonstrate the importance of considering the physico-geometrical perspective when interpreting the kinetic results for the thermal degradation of polymers.

  2. Identification of Forced Degradation Products of Itopride by LC-PDA and LC-MS

    OpenAIRE

    Payal Joshi; Suvarna Bhoir; Bhagwat, A. M.; K Vishwanath; Jadhav, R. K.

    2011-01-01

    Degradation products of itopride formed under different forced conditions have been identified using LC-PDA and LC-MS techniques. Itopride was subjected to forced degradation under the conditions of hydrolysis, photolysis, oxidation, dry and wet heat, in accordance with the International Conference on Harmonization. The stress solutions were chromatographed on reversed phase C18 (250×4.6 mm, 5 μm) column with a mobile phase methanol:water (55:45, v/v) at a detection wavelength of 215 nm. Itop...

  3. Study of the effect of the fibre mass UP2 degradation products on radionuclide mobilisation

    Energy Technology Data Exchange (ETDEWEB)

    Duro, Lara; Grive, Mireia; Gaona, Xavier; Bruno, Jordi [Amphos 21 Consulting S.L., Barcelona (Spain); Andersson, Thomas; Boren, Hans; Dario, Maarten [Linkoeping Univ., Linkoeping (Sweden); Allard, Bert; Hagberg, Jessica [Oerebro Univ., Oerebro (Sweden); Kaellstroem, Klas [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    2012-09-15

    This report presents a literature review and laboratory work of the degradation of the fibre UP2, as well as an assessment of the effects of its degradation products on Europium sorption onto cement, as an example of their effects on radionuclide migration. All laboratory work was performed by the Swedish groups (Linkoeping and Oerebro Universities), who also performed some of the literature review. The data interpretation was performed by the Spanish team (Amphos 21). SKB has combined the reports of these studies into this common document and has added minor editorial changes. All these changes have been accepted by the authors.

  4. The degradation of lining of rotary furnaces in the production of zinc oxide

    Directory of Open Access Journals (Sweden)

    Natália Luptáková

    2014-06-01

    Full Text Available This paper is closely connected with the complex problem of degradation relating to the refractories of rotary furnace linings in the production of zinc oxide. Zinc oxide can be produced by variety of ways, but the most common method of production which is used in Europe is indirect, i.e. pyrolytic combustion of zinc. This method is also called "French process" of manufacturing ZnO. But this mentioned method of preparation leads to the creation of the enormous amount of zinc slag including chemical complexes of elements Fe, Zn and Al. The mechanism of degradation of the lining leads to slag rests and it is closely connected with the mutual interaction of the aggressive agents with the components of the lining. This process creates a new undesired surface layer which increased the overall thickness of zinc slag. Stuck slag has the influence on rapid degradation of the linings and moreover it also decreases the production quality of ZnO. Analysis results introduced in this paper are significant information for minimizing of degradation of rotary furnaces.  

  5. Characterization of radiolytically generated degradation products in the strip section of a TRUEX flowsheet

    Energy Technology Data Exchange (ETDEWEB)

    Peterman, Dean R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Olson, Lonnie G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Groenewold, Gary S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); McDowell, Rocklan G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tillotson, Richard D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Law, Jack D. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-08-01

    This report presents a summary of the work performed to meet the FCRD level 2 milestone M3FT-13IN0302053, “Identification of TRUEX Strip Degradation.” The INL radiolysis test loop has been used to identify radiolytically generated degradation products in the strip section of the TRUEX flowsheet. These data were used to evaluate impact of the formation of radiolytic degradation products in the strip section upon the efficacy of the TRUEX flowsheet for the recovery of trivalent actinides and lanthanides from acidic solution. The nominal composition of the TRUEX solvent used in this study is 0.2 M CMPO and 1.4 M TBP dissolved in n-dodecane and the nominal composition of the TRUEX strip solution is 1.5 M lactic acid and 0.050 M diethylenetriaminepentaacetic acid. Gamma irradiation of a mixture of TRUEX process solvent and stripping solution in the test loop does not adversely impact flowsheet performance as measured by stripping americium ratios. The observed increase in americium stripping distribution ratios with increasing absorbed dose indicates the radiolytic production of organic soluble degradation compounds.

  6. Novel chromatographic separation and carbon solid-phase extraction of acetanilide herbicide degradation products.

    Science.gov (United States)

    Shoemaker, Jody A

    2002-01-01

    One acetamide and 5 acetanilide herbicides are currently registered for use in the United States. Over the past several years, ethanesulfonic acid (ESA) and oxanilic acid (OA) degradation products of these acetanilide/acetamide herbicides have been found in U.S. ground waters and surface waters. Alachlor ESA and other acetanilide degradation products are listed on the U.S. Environmental Protection Agency's (EPA) 1998 Drinking Water Contaminant Candidate List. Consequently, EPA is interested in obtaining national occurrence data for these contaminants in drinking water. EPA currently does not have a method for determining these acetanilide degradation products in drinking water; therefore, a research method is being developed using liquid chromatography/negative ion electrospray/mass spectrometry with solid-phase extraction (SPE). A novel chromatographic separation of the acetochlor/alachlor ESA and OA structural isomers was developed which uses an ammonium acetate-methanol gradient combined with heating the analytical column to 70 degrees C. Twelve acetanilide degradates were extracted by SPE from 100 mL water samples using carbon cartridges with mean recoveries >90% and relative standard deviations < or =16%.

  7. [Degradation Kinetics and Formation of Disinfection By-products During Linuron Chlorination in Drinking Water].

    Science.gov (United States)

    Ling, Xiao; Hu, Chen-yan; Cheng, Ming; Gu, Jian

    2015-05-01

    Chlorination degradation of linuron was studied using the common disinfectant sodium hypochlorite, the effects of chlorine dosage, pH value, bromine ion concentrationand temperature were systematically investigated, and the formation characteristics of disinfection by-products (DBPs) during the chlorination reaction was analyzed. The results showed that the chlorination degradation kinetics of linuron by sodium hypochlorite could be well described by the second-order kinetic model. Moreover, pH values had a great impact on the degradation reaction, and the rate constant reached the maximum level at pH 7, and the base elementary reaction rate constants of HOCl and OCl- with linuron were 4.84 x 10(2) L · (mol · h)(-1) and 3.80 x 10(2) L · (mol · h)(-1), respectively. The reaction rate decreased with the addition of bromide ion and increased with increasing temperature. Furthermore, many kinds of disinfection by- products were produced during the chlorination degradation of linuron, including CF, DCAN, TCNM and halogen acetone. Under conditions of different solution pH and different bromide ion concentrations, there would be significant difference in the types and concentrations of disinfection by-products.

  8. Characterization of degradation products of amorphous and polymorphic forms of clopidogrel bisulphate under solid state stress conditions

    DEFF Research Database (Denmark)

    Raijada, Dhara K; Prasad, Bhagwat; Paudel, Amrit

    2010-01-01

    The present study deals with the stress degradation studies on amorphous and polymorphic forms of clopidogrel bisulphate. The objective was to characterize the degradation products and postulate mechanism of decomposition of the drug under solid state stress conditions. For that, amorphous form...... degradation products were observed under various stress conditions. The structures of all of them were elucidated using LC-MS/TOF and LC-MS(n) studies. While one matched the known hydrolytic decomposition product of the drug in solution, seven others were new. The postulated degradation pathway and mechanism...

  9. Reheating, thermalization and non-thermal gravitino production in MSSM inflation

    Energy Technology Data Exchange (ETDEWEB)

    Ferrantelli, Andrea [Tallinn University of Technology, Faculty of Civil Engineering, Tallinn (Estonia)

    2017-10-15

    In the framework of MSSM inflation, matter and gravitino production are here investigated through the decay of the fields which are coupled to the udd inflaton, a gauge-invariant combination of squarks. After the end of inflation, the flat direction oscillates about the minimum of its potential, losing at each oscillation about 56% of its energy into bursts of gauge/gaugino and scalar quanta when crossing the origin. These particles then acquire a large inflaton VEV-induced mass and decay perturbatively into the MSSM quanta and gravitinos, transferring the inflaton energy very efficiently via instant preheating. Regarding thermalization, we show that the MSSM degrees of freedom thermalize very quickly, yet not immediately by virtue of the large vacuum expectation value of the inflaton, which breaks the SU(3){sub C} x U(1){sub Y} symmetry into a residual U(1). The energy transfer to the MSSM quanta is very efficient, since full thermalization is achieved after only O(40) complete oscillations. The udd inflaton thus provides an extremely efficient reheating of the Universe, with a temperature T{sub reh} = O(10{sup 8} GeV), which allows for instance several mechanisms of baryogenesis. We also compute the gravitino number density from the perturbative decay of the flat direction and of the SUSY multiplet. We find that the gravitinos are produced in negligible amount and satisfy cosmological bounds such as the Big Bang nucleosynthesis (BBN) and dark matter (DM) constraints. (orig.)

  10. Degradation of the synthetic dye amaranth by the fungus Bjerkandera adusta Dec 1: inference of the degradation pathway from an analysis of decolorized products.

    Science.gov (United States)

    Gomi, Nichina; Yoshida, Shuji; Matsumoto, Kazutsugu; Okudomi, Masayuki; Konno, Hiroki; Hisabori, Toru; Sugano, Yasushi

    2011-11-01

    We examined the degradation of amaranth, a representative azo dye, by Bjerkandera adusta Dec 1. The degradation products were analyzed by high performance liquid chromatography (HPLC), visible absorbance, and electrospray ionization time-of-flight mass spectroscopy (ESI-TOF-MS). At the primary culture stage (3 days), the probable reaction intermediates were 1-aminonaphthalene-2,3,6-triol, 4-(hydroxyamino) naphthalene-1-ol, and 2-hydroxy-3-[2-(4-sulfophenyl) hydrazinyl] benzenesulfonic acid. After 10 days, the reaction products detected were 4-nitrophenol, phenol, 2-hydroxy-3-nitrobenzenesulfonic acid, 4-nitrobenzene sulfonic acid, and 3,4'-disulfonyl azo benzene, suggesting that no aromatic amines were created. Manganese-dependent peroxidase activity increased sharply after 3 days culture. Based on these results, we herein propose, for the first time, a degradation pathway for amaranth. Our results suggest that Dec 1 degrades amaranth via the combined activities of peroxidase and hydrolase and reductase action.

  11. Analysis of degradation products of PAH and PCP using electrospray ionization mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Pavlovich, J.G.; Stringfellow, W.; Kazunga, Chikoma; Aitken, M.D.; Charles, M.J. [Univ. of North Carolina, Chapel Hill, NC (United States)

    1994-12-31

    Bioremediation is an important strategy for the clean-up of hazardous waste sites. In the past, assessing the efficacy of bioremediation techniques has involved monitoring the disappearance of the pollutant with minimal regard to the products formed via microbial degradation of the initial contaminant. Aromatic hydrocarbons in the environment are subject to oxidation by a variety of mechanisms including photooxidation, microbial degradation and metabolism by higher organisms. These processes result in an array of oxygenated products including hydroxylated aromatics, ketones, quinones, and acids. In many animals, metabolically activated PAH bind covalently to cellular species including sulfate, glucuronic acid, glutathione, as well as proteins and DNA. In some cases, the oxygenated species have been shown to be more highly toxic than the parent hydrocarbon. Measures directed at either controlling the migration of toxic microbial metabolites, or precluding their formation in the first place, can be developed intelligently if the chemical characteristics of the toxic can be determined. It is, therefore, desirable to characterize fully the degradation products present in environmental samples not only as a means of elucidating the degradation pathways, but in order to assess the full hazard represented by the contamination and the effectiveness of the clean-up protocols employed. Conventional GC/MS techniques often require extensive sample clean-up and fractionation, while the more polar metabolites are intractable to GC altogether. Since electrospray ionization is well suited to analysis of such polar nonvolatile compounds, as well as compatible with HPLC clean-up and separations, the authors are applying this technique to the analysis of polar degradation products of aromatic hydrocarbons including polycyclic aromatic hydrocarbons and chlorinated phenols.

  12. Biodegradation of Leonardite by an alkali-producing bacterial community and characterization of the degraded products.

    Science.gov (United States)

    Gao, Tong-Guo; Jiang, Feng; Yang, Jin-Shui; Li, Bao-Zhen; Yuan, Hong-Li

    2012-03-01

    In this study, three bacterial communities were obtained from 12 Leonardite samples with the aim of identifying a clean, effective, and economic technique for the dissolution of Leonardite, a type of low-grade coal, in the production of humic acid (HA). The biodegradation ability and characteristics of the degraded products of the most effective bacterial community (MCSL-2), which degraded 50% of the Leonardite within 21 days, were further investigated. Analyses of elemental composition, (13)C NMR, and Fourier transform infrared revealed that the contents of C, O, and aliphatic carbon were similar in biodegraded humic acid (bHA) and chemically (alkali) extracted humic acid (cHA). However, the N and carboxyl carbon contents of bHA was higher than that of cHA. Furthermore, a positive correlation was identified between the degradation efficiency and the increasing pH of the culture medium, while increases of manganese peroxidase and esterase activities were also observed. These data demonstrated that both alkali production and enzyme reactions were involved in Leonardite solubilization by MCSL-2, although the former mechanism predominated. No fungus was observed by microscopy. Only four bacterial phylotypes were recognized, and Bacillus licheniformis-related bacteria were identified as the main group in MCSL-2 by analysis of amplified 16S rRNA genes, thus demonstrating that Leonardite degradation ability has a limited distribution in bacteria. Hormone-like bioactivities of bHA were also detected. In this study, a bacterial community capable of Leonardite degradation was identified and the products characterized. These data implicate the use of such bacteria for the exploitation of Leonardite as a biofertilizer.

  13. Isolation and characterization of novel degradation products of Doxofylline using HPLC, FTIR, LCMS and NMR.

    Science.gov (United States)

    Raju, Ch Krishnam; Pandey, Avadhesh K; S, Gururaj; Ghosh, Kaushik; Pola, Arunima; Goud P, Sanath Kumar; Jaywant, Mrunal A; Navalgund, Sameer G

    2017-06-05

    Forced degradation of Doxofylline (DFL) in different stress (base and peroxide) conditions gave rise to two potential unknown impurities. These unknown degradation products DFL DEG-I and DFL DEG-II were evaluated using a new-reverse-phase high performance liquid chromatography (HPLC), where it was eluted at 0.44 and 1.09 relative retention times to DFL peak. DFL DEG-I and DFL DEG-II were isolated using preparative HPLC from degradation mixtures. The structure of DFL DEG-I and DFL DEG-II were elucidated using high resolution MS, multi-dimensional NMR and FTIR spectroscopic techniques, and characterized. The stereochemistry of the enantiomers in DFL DEG-II has further been investigated using computational techniques. To the best of our knowledge, DFL DEG-I and DFL DEG-II are novel impurities and not reported elsewhere. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. The Entropy Production Distribution in Non-Markovian Thermal Baths

    Directory of Open Access Journals (Sweden)

    José Inés Jiménez-Aquino

    2014-03-01

    Full Text Available In this work we study the distribution function for the total entropy production of a Brownian particle embedded in a non-Markovian thermal bath. The problem is studied in the overdamped approximation of the generalized Langevin equation, which accounts for a friction memory kernel characteristic of a Gaussian colored noise. The problem is studied in two physical situations: (i when the particle in the harmonic trap is subjected to an arbitrary time-dependent driving force; and (ii when the minimum of the harmonic trap is arbitrarily dragged out of equilibrium by an external force. By assuming a natural non Markovian canonical distribution for the initial conditions, the distribution function for the total entropy production becomes a non Gaussian one. Its characterization is then given through the first three cumulants.

  15. Treatment of low level radioactive liquid waste containing appreciable concentration of TBP degraded products

    Energy Technology Data Exchange (ETDEWEB)

    Valsala, T.P., E-mail: tpvalsala@gmail.com [Nuclear Recycle Board, Bhabha Atomic Research Centre, Tarapur 401 502 (India); Sonavane, M.S.; Kore, S.G.; Sonar, N.L.; De, Vaishali; Raghavendra, Y.; Chattopadyaya, S.; Dani, U.; Kulkarni, Y.; Changrani, R.D. [Nuclear Recycle Board, Bhabha Atomic Research Centre, Tarapur 401 502 (India)

    2011-11-30

    Highlights: Black-Right-Pointing-Pointer Low Level radioactive liquid waste is decontaminated by chemical co-precipitation before discharge to the environment. Black-Right-Pointing-Pointer Separation of TBP degraded products from the waste by acidification provided very good DF with respect to different radionuclides. Black-Right-Pointing-Pointer The reductive co-precipitation of {sup 106}Ru and {sup 99}Tc effectively removed these radio nuclides from the waste stream. Black-Right-Pointing-Pointer Treatment of the separated organic mass is of concern due to its organic nature. Black-Right-Pointing-Pointer Fixation of organic mass in cement matrix can be adopted for its conditioning and shallow land disposal. - Abstract: The acidic and alkaline low level radioactive liquid waste (LLW) generated during the concentration of high level radioactive liquid waste (HLW) prior to vitrification and ion exchange treatment of intermediate level radioactive liquid waste (ILW), respectively are decontaminated by chemical co-precipitation before discharge to the environment. LLW stream generated from the ion exchange treatment of ILW contained high concentrations of carbonates, tributyl phosphate (TBP) degraded products and problematic radio nuclides like {sup 106}Ru and {sup 99}Tc. Presence of TBP degraded products was interfering with the co-precipitation process. In view of this a modified chemical treatment scheme was formulated for the treatment of this waste stream. By mixing the acidic LLW and alkaline LLW, the carbonates in the alkaline LLW were destroyed and the TBP degraded products got separated as a layer at the top of the vessel. By making use of the modified co-precipitation process the effluent stream (1-2 {mu}Ci/L) became dischargeable to the environment after appropriate dilution. Based on the lab scale studies about 250 m{sup 3} of LLW was treated in the plant. The higher activity of the TBP degraded products separated was due to short lived {sup 90}Y isotope

  16. Thermal stress promotes host mitochondrial degradation in symbiotic cnidarians: are the batteries of the reef going to run out?

    Directory of Open Access Journals (Sweden)

    Simon R Dunn

    Full Text Available The symbiotic relationship between cnidarians and their dinoflagellate symbionts, Symbiodinium spp, which underpins the formation of tropical coral reefs, can be destabilized by rapid changes to environmental conditions. Although some studies have concluded that a breakdown in the symbiosis begins with increased reactive oxygen species (ROS generation within the symbiont due to a decoupling of photosynthesis, others have reported the release of viable symbionts via a variety of host cell derived mechanisms. We explored an alternative model focused upon changes in host cnidarian mitochondrial integrity in response to thermal stress. Mitochondria are often likened to being batteries of the cell, providing energy in the form of ATP, and controlling cellular pathway activation and ROS generation. The overall morphology of host mitochondria was compared to that of associated symbionts under an experimental thermal stress using confocal and electron microscopy. The results demonstrate that hyperthermic stress induces the degradation of cnidarian host mitochondria that is independent of symbiont cellular deterioration. The potential sites of host mitochondrial disruption were also assessed by measuring changes in the expression of genes associated with electron transport and ATP synthesis using quantitative RT-PCR. The primary site of degradation appeared to be downstream of complex III of the electron transport chain with a significant reduction in host cytochrome c and ATP synthase expression. The consequences of reduced expression could limit the capacity of the host to mitigate ROS generation and maintain both organelle integrity and cellular energy supplies. The disruption of host mitochondria, cellular homeostasis, and subsequent cell death irrespective of symbiont integrity highlights the importance of the host response to thermal stress and in symbiosis dysfunction that has substantial implications for understanding how coral reefs will survive

  17. Thermal Degradation Behavior of Siloxane Elastomer Impregnated Carbon Nanotube Areogel Networks

    Energy Technology Data Exchange (ETDEWEB)

    Lewicki, J P; Worsley, M A

    2010-12-13

    A novel class of nanoporous graphitic carbon foams has been synthesized. Unprecedented properties - electrically conductive, thermally stable (> 1000 C), and mechanically robust. Improved transport properties (DWNT-CA, SWNT-CA) - greater than 100% enhancement in thermal conductivity, 100-400% improvement in electrical conductivity. Rich mechanical deformation behavior (SWNT-CA) - stiff ({approx}100% improvement of elastic modulus), energy dissipation, fracture toughness, and fatigue behavior. Implications for energy-related technologies - hydrogen storage, fusion and fission energy, catalysis, electrochemical energy storage, and composites with foam scaffolds.

  18. A method to calculate thermal conductivity of a nonperiodic system, bamboo Si1-xGex nanowire with axially degraded components

    Science.gov (United States)

    Xia, Minggang; Han, Jinyun; Cheng, Zhaofang; Zhang, Shengli; Li, Baowen

    2017-10-01

    For a nonperiodic system, a bamboo Si1-xGex nanowire with axially degraded components, it is impossible to obtain its phonon dispersion relations through lattice dynamic or the first principle calculation. Therefore, we present a simple and available method to solve this problem. At first, the Si1-xGex nanowire with axially degraded component is divided into several sections according to its component distribution like bamboos' sections formed in the growth process. For each section with a given x value, we constructed a pseudo-cell to calculate its phonon dispersion relations. Thermal conductances of junctions and of each section are then calculated by the phonon mismatch model and the phonon transmission probability with diffusive and ballistic portions. The dependences of thermal conductivity on the length of each section and the gradient of degraded component between sections are presented. We studied thermal conductivity dependence on temperature, length and diameter of the Si1-xGex nanowire with axially degraded component. And we found κ l0.8, in which the exponent 0.8 is ascribed to the competition between phonons ballistic and diffusive transport. Furthermore, thermal conductivities along axial (100), (110), and (111) directions are discussed in detail. The method provides a simple and available tool to study thermal conductivity of a non-period system, such as a quasiperiodic superlattice or a nanowire with axially degraded component.

  19. Biodegradation of the alkaline cellulose degradation products generated during radioactive waste disposal.

    Science.gov (United States)

    Rout, Simon P; Radford, Jessica; Laws, Andrew P; Sweeney, Francis; Elmekawy, Ahmed; Gillie, Lisa J; Humphreys, Paul N

    2014-01-01

    The anoxic, alkaline hydrolysis of cellulosic materials generates a range of cellulose degradation products (CDP) including α and β forms of isosaccharinic acid (ISA) and is expected to occur in radioactive waste disposal sites receiving intermediate level radioactive wastes. The generation of ISA's is of particular relevance to the disposal of these wastes since they are able to form complexes with radioelements such as Pu enhancing their migration. This study demonstrates that microbial communities present in near-surface anoxic sediments are able to degrade CDP including both forms of ISA via iron reduction, sulphate reduction and methanogenesis, without any prior exposure to these substrates. No significant difference (n = 6, p = 0.118) in α and β ISA degradation rates were seen under either iron reducing, sulphate reducing or methanogenic conditions, giving an overall mean degradation rate of 4.7 × 10(-2) hr(-1) (SE ± 2.9 × 10(-3)). These results suggest that a radioactive waste disposal site is likely to be colonised by organisms able to degrade CDP and associated ISA's during the construction and operational phase of the facility.

  20. Stereoselective Degradation and Transformation Products of a Novel Chiral Insecticide, Paichongding, in Flooded Paddy Soil.

    Science.gov (United States)

    Li, Juying; Zhang, Sufen; Wu, Chengchen; Li, Chao; Wang, Haiyan; Wang, Wei; Li, Zhong; Ye, Qingfu

    2016-10-12

    Paichongding is a chiral neonicotinoid insecticide currently marketed as racemate against sucking and biting insects. Under anaerobic condition, all paichongding stereoisomers underwent appreciable degradation in soil during 100 days of incubation, with estimated t 1/2 values between 0.18 and 3.15 days. Diastereoselectivity in paichongding degradation was observed, with enantiomers (5S,7R)- and (5R,7S)-paichongding being more preferentially degraded in soils than enantiomers (5R,7R)- and (5S,7S)-paichongding. The half-lives of (5R,7R)- and (5S,7S)-paichongding were 3.05 and 3.15 days, respectively, as compared to 0.18 day for (5R,7S)- and (5S,7R)-paichongding. A total of nine intermediates were identified, of which depropylated paichongding was the predominant metabolite and appeared to be stable and recalcitrant to further degradation. Paichongding is degraded via denitration, depropylation, nitrosylation, demethylation, hydroxylation, and enol-keto tautomerism, producing chiral and biologically active products. These findings could have implications for environmental risk and food safety evaluations.

  1. Study of Aramid Fiber/Polychloroprene Recycling Process by Thermal Degradation

    Directory of Open Access Journals (Sweden)

    Igor Dabkiewicz

    2016-07-01

    Full Text Available Aramid fiber is an important polymer applied as reinforcement in high-performance composites, which, due its exceptional properties, becomes an excellent impact absorption material. It has been broadly utilized in aeronautic industry and ballistic protection. In aircrafts, it is mainly used in secondary structures, such as fairings, floor panels, and bullet proof structures in helicopters, whereas, in ballistic protection industry, it is applied in automotive armor and bullet proof vest. Under environmental perspective, it is worrying the development and application of composites, which generate proportional discards of these materials, whether originated from manufacturing process, spare parts or end of life cycle. High-performance composite materials like those using aramid fiber are generally difficult to recycle due to their properties and the difficulty for the separation of the components, making their recycling economically unviable. From the characteristics of composite materials and environmental viewpoint, this paper presents a new aramid fiber recycling process. The main objective of this research was to study different recycling methods in aramid fibers/Neoprene® composites. To promote the Neoprene® degradation, it was used a pyrolysis oven with controlled atmosphere and CO 2 injection. For the degraded separation, it was designed a mechanical washing machine in which the most degraded separation occurred. To complete the materials separation, it was employed a manual cleaning process, and, at least to prove the efficacy of the process, it was applied a tensile test in the yarns.

  2. Effect of the Electric Field Frequency on Ascorbic Acid Degradation during Thermal Treatment by Ohmic Heating

    Science.gov (United States)

    Mercali, Giovana Domeneghini; Schwartz, Steven; Marczak, Ligia Damasceno Ferreira; Tessaro, Isabel Cristina; Sastry, Sudhir

    2014-01-01

    In this work, the influence of the electric field frequency and solids content on the degradation kinetics of ascorbic acid during ohmic heating of acerola pulp and acerola serum was investigated. The degradation percentage of ascorbic acid in the pulp after 120 min of heating varied between 12 and 17%. For the serum, the degradation percentage was in the range of 13 and 18%. The results were fitted to the first-order model, and the kinetic rate constants ranged from 1.1 to 1.6 × 10−3 min−1 and from 1.1 to 1.5 × 10−3 min−1 for pulp and serum, respectively. D values ranged between 1480 and 2145 min for the pulp and between 1524 and 1951 min for the serum. A distinct behavior between the kinetic parameters of the pulp and serum in electric field frequencies ranging from 10 to 1000 Hz indicates that the presence of distinct amounts and types of solids might affect the rate of the electron transfer in electrochemical reactions. These variables may also affect the polarization process stimulated by the oscillating electric field. The non-achievement of the equilibrium of the polarization process may have an influence on oxidation reactions, affecting the predisposition to hydrogen donation from the ascorbic acid molecule. PMID:24892902

  3. Impact of modified graphene and microwave irradiation on thermal stability and degradation mechanism of poly (styrene-co-methyl meth acrylate)

    Energy Technology Data Exchange (ETDEWEB)

    Zubair, Mukarram [Department of Environmental Engineering, University of Dammam, 31982 Dammam (Saudi Arabia); Shehzad, Farrukh [Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia, (Saudi Arabia); Al-Harthi, Mamdouh A., E-mail: mamdouh@kfupm.edu.sa [Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia, (Saudi Arabia); Center of Research Excellence in Nanotechnology, King Fahd University of Petroleum & Minerals, 31261 Dhahran (Saudi Arabia)

    2016-06-10

    Highlights: • Modified graphene imparts thermal stability to Poly (styrene-co-methyl methacrylate) [P(st-mma)]. • The thermal stability of P(st-mma) decreased with microwave irradiation. • The thermal stability of P(st-mma)/MG nanocomposites increased with irradiation time up to 10 min and decreased subsequently. • The degradation of P(st-mma) and P(st-mma)/MG is governed by random scission model. - Abstract: Poly (styrene-co-methyl methacrylate) [P(st-mma)] composite containing 0.1 wt% modified graphene (MG) was prepared via melt blending. MG was prepared by oxidation method using nitric acid. The P(st-mma) and P(st-mma)MG composite were irradiated using microwave radiation. The degradation mechanism and thermal stability of the irradiated and un-irradiated samples was analyzed by TGA. P(st-mma)MG showed high thermal stability. The average activation energy of thermal degradation was found to be 200 kJ/mol for P(st-mma), 214 kJ/mol for P(st-mma)MG. The activation energy was highest for 10 min irradiated nanocomposites indicating an improvement in stability. The degradation mechanism was investigated by comparing the master plots constructed using the experimental data with theoretical master plots of various kinetic models. The thermal degradation of P(st-mma) and P(st-mma)MG composite before and after irradiation governs the random scission mechanism. SEM and TEM micrographs showed improved interactions and degradation of composites after 10 min and 20 min irradiation respectively.

  4. Fire performance, microstructure and thermal degradation of an epoxy based nano intumescent fire retardant coating for structural applications

    Energy Technology Data Exchange (ETDEWEB)

    Aziz, Hammad, E-mail: engr.hammad.aziz03@gmail.com; Ahmad, Faiz, E-mail: faizahmad@petronas.com.my; Yusoff, P. S. M. Megat; Zia-ul-Mustafa, M. [Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, Tronoh 31750, Perak (Malaysia)

    2015-07-22

    Intumescent fire retardant coating (IFRC) is a passive fire protection system which swells upon heating to form expanded multi-cellular char layer that protects the substrate from fire. In this research work, IFRC’s were developed using different flame retardants such as ammonium polyphosphate, expandable graphite, melamine and boric acid. These flame retardants were bound together with the help of epoxy binder and cured together using curing agent. IFRC was then reinforced with nano magnesium oxide and nano alumina as inorganic fillers to study their effect towards fire performance, microstructure and thermal degradation. Small scale fire test was conducted to investigate the thermal insulation of coating whereas fire performance was calculated using thermal margin value. Field emission scanning electron microscopy was used to examine the microstructure of char obtained after fire test. Thermogravimetric analysis was conducted to investigate the residual weight of coating. Results showed that the performance of the coating was enhanced by reinforcement with nano size fillers as compared to non-filler based coating. Comparing both nano size magnesium oxide and nano size alumina; nano size alumina gave better fire performance with improved microstructure of char and high residual weight.

  5. Gas chromatography/mass spectrometry analysis of triacetone triperoxide (TATP) degradation products.

    Science.gov (United States)

    Armitt, David; Zimmermann, Peter; Ellis-Steinborner, Simon

    2008-04-01

    Interest in the analysis and detection of triacetone triperoxide (TATP) and other organic peroxides has increased in recent years. Also of interest is the degradation and decomposition of the peroxides, not only to gain more detailed chemical information from organic peroxide samples, but also to investigate possible new procedures or mechanisms for chemical neutralisation. This report investigates the chemical degradation products of TATP after it has been treated with different acids within a sealed system over a period of 14 days. The samples were collected and analysed by solid-phase microextraction (SPME) and direct liquid injection gas chromatography/mass spectrometry (GC/MS). The results of the experiments indicate that the rate of chemical degradation of TATP and the products formed are dependent on the type of acid. The observed differences enables the type of acid used in the degradation process to be determined, provide complementary information to identify the presence of TATP, and possibly indicate new pathways that may be used to chemically neutralise TATP. (c) 2008 Commonwealth of Australia. Published by John Wiley & Sons, Ltd.

  6. The land productivity dynamics trend as a tool for land degradation assessment in a dryland ecosystem.

    Science.gov (United States)

    Baskan, Oguz; Dengiz, Orhan; Demirag, İnci Turan

    2017-05-01

    The aim of this study was to produce a land productivity dynamic map of a degraded catchment located in dryland ecosystem via a land degradation assessment using three indicators, namely land use, land productivity, and soil organic carbon density. The study was conducted in the Mogan Catchment, Turkey, between 2000 and 2010. The study embraced the current trend for assessing ecosystem services over wide areas. For this purpose, satellite images were used to determine changes in land use and vegetation density. In addition, a total of 834 soil samples were collected from the surface soil in 2000 and 2010 to assess the soil organic carbon density. In more than 37% of the catchment area of approx. 37,100 ha, land productivity had declined, while about 43% of the catchment showed early signs of decline. Analysis of long-term changes and the conversion of levels of vegetative or standing biomass into land productivity dynamics (LPD) is only the first step. Current land management practices are contributing to serious, widespread land degradation, with only a very small area of the catchment showing a stable or increasing LPD for the period from 2000 to 2010. The implementation of land management policies and practices in order to achieve sustainable land management are urgently required.

  7. Acrylamide content and antioxidant capacity in thermally processed fruit products

    Directory of Open Access Journals (Sweden)

    Kristína Kukurová

    2015-05-01

    Full Text Available Acrylamide as a known processing contaminant was determined in various heat-treated plum products purchased from a local market using LC/ESI-MS-MS. The highest level of acrylamide in the range up to 60 μg/kg was detected in a plum stew known as a "povidla", and in prunes, respectively. These products typically undergo intensive heat treatment that may take from several hours to days. Using a fruit dehydrator in home production of prunes, a low level of acrylamide under LOQ (15 μg/kg was detected in comparison to most commercial products. Only in one of the prune samples from the market was the acrylamide content near to LOQ. The highest content of acrylamide (46 μg/kg was detected in the Slovak sample of prune originated in Nitra region. High acrylamide content, in the range from 23 to 45 μg/kg, was observed in prunes from South America. In the rest of analysed heat-treated plum products such as plum juice, plum compote or baby food with plum puree, acrylamide was not detected due to moderate conditions during thermal processing: temperature below 120 °C and a shorter time of thermal exposure. The total phenolic content and antioxidant capacity of prunes were analysed using a UV-VIS-NIR spectrophotometer and an electron paramagnetic resonance (EPR spectroscopy. Home-prepared prunes were characterized by the highest content of phenolics (4780 mg GAE/kg and antioxidant capacity (14.6 mmol TEAC/kg. Commercial samples of prunes reached phenolics in the range from 1619 to 3461 mg GAE /kg, and antioxidant capacity was observed between 6.1 and 12.1 mmol TEAC/kg. Antioxidant capacity of prunes strongly correlated with total phenolic content and yellow and red colours measured in a CIELab system. However, no significant correlation between the acrylamide and antioxidative or organoleptic properties of prunes was observed. Moreover, it was noticed that bio production of plums did not demonstrate any positive impact on final acrylamide content or

  8. In situ rumen degradation and in vitro gas production of some selected grains from Turkey.

    Science.gov (United States)

    Umucalilar, H D; Coşkun, B; Gülşen, N

    2002-10-01

    An investigation of the dry matter degradability (DMD) and effective dry matter degradability (EDDM) was performed for barley, wheat, rye, corn, triticale and oat samples, using the Nylon-bag technique. Gas production (GP), metabolizable energy (ME) and in vitro organic matter digestibility (IVOMD) were also studied by using Hohenheim gas test. The DM from barley, wheat, rye and triticale was digested rapidly in the rumen, and, at the 48 h of incubation, degradability was found to be approximately about 80%. The higher degradability observed for these grains than for oats and corn was attributable to the structure of these grains. In contrast, DM of corn and oats was degraded very slowly and reached 66.7 and 66.5 at 48 h, respectively. Effective degradability values of barley, wheat, rye, corn, triticale and oats were determined to be 61.4, 69.0, 64.0, 41.7, 66.7 and 58.6% in 5% rumen outflow rate, respectively. At the end of the 48 h incubation, total gas productions in barley, wheat, rye, corn, triticale and oats were estimated to be 83.6, 87.2, 87.5, 83.5, 85.8 and 63.9 ml/200 mg DM, respectively. The mean ME values of these grains calculated from cumulative gas amount at 24 h incubation were 11.8, 12.1, 12.3, 10.9, 12.4 and 10.2 MJ/kg DM, respectively. In vitro digestible organic matter of barley, wheat, rye, corn, triticale and oats were estimated to be 85.0, 87.3, 88.2, 79.5, 89.0 and 72.6%. Percentage overall EDDM (k=5%) of barley, wheat, rye, triticale and oats was positively correlated with in vitro GP at 6 h, cumulative GP at 24 h and total GP at 48 h (p<0.05). As a result, in situ dry matter degradation of grains showed great differences depending on the chemical compositions. In situ EDDM of grains may be predicted from in vitro gas production parameters.

  9. In vitro degradation and gas production of brachiaria grass with levels of biodiesel byproducts

    Directory of Open Access Journals (Sweden)

    Juliana Marques Freire

    2017-04-01

    Full Text Available This study aimed to evaluate the in vitro degradability and gas production in diets containing byproducts from the national biodiesel industry (castor bean, canola, forage radish and black sunflower replacing Brachiaria grass in four levels (0, 30, 50 and 70%. The inoculum for in vitro incubation was obtained from three fistulated Holstein cows. The experimental design was 4 x 4 factorial completely randomized experimental design consisting of four byproducts and four levels. All byproducts studied had a significant effect (p < 0.05 on in vitro digestibility. The castor bean byproducts promoted the lowest cumulative gas production at the end of 48 hours incubation. Regarding digestibility, the byproducts of canola and radish at 70% level did not affect the degradability of dry matter.

  10. Sorption of chlorinated solvents and degradation products on natural clayey tills

    DEFF Research Database (Denmark)

    Cong, Lu; Bjerg, Poul Løgstrup; Zhang, Fengjun

    2011-01-01

    The sorption of chlorinated solvents and degradation products on seven natural clayey till samples from three contaminated sites was investigated by laboratory batch experiments in order to obtain reliable sorption coefficients (Kd values). The sorption isotherms for all compounds were nearly...... of hydrophobicity of the compounds. The octanol–water coefficient (logKow) correlated slightly better with logKd values than logKoc values indicating that the Kd values may be independent of the actual organic carbon content (foc). The estimated logKoc or logKd for chlorinated solvents and degradation products...... the Rugårdsvej site. In conclusion, this study with a wide range of chlorinated ethenes and ethanes – in line with previous studies on PCE and TCE – suggest that sorption in clayey tills could be higher than typically expected....

  11. Characterization of degradation products from alkaline wet oxidation of wheat straw

    DEFF Research Database (Denmark)

    Klinke, H.B.; Ahring, B.K.; Schmidt, A.S.

    2002-01-01

    degreesC with addition of 12 bar oxygen and 6.5 g l(-1) Na2CO3. At these conditions the hemicellulose fraction from 100 g straw consisted of soluble hemicellulose (16 g), low molecular weight carboxylic acids (11 g), monomeric phenols (0.48 g) and 2-furoic acid (0.01 g). Formic acid and acetic acid...... constituted the majority of degradation products (8.5 g). The main phenol monomers were 4-hydroxybenzaldehyde, vanillin, syringaldehyde, acetosyringone (4-hydroxy-3,5-dimethoxy-acetophenone), vanillic acid and syringic acid, occurring in 0.04-0.12 g per 100 g straw concentrations. High lignin removal from...... the solid fraction (62%) did not provide a corresponding increase in the phenol monomer content but was correlated to high carboxylic acid concentrations. The degradation products in the hemicellulose fractions co-varied with the pre-treatment conditions in the principal component analysis according...

  12. Thermal degradation of multilayer insulation due to the presence of penetrations

    Science.gov (United States)

    Johnson, W. L.; Kelly, A. O.; Fesmire, J. E.

    2014-01-01

    Invented in the 1950s, cryogenic multilayer insulation (MLI) continues to be studied, tested, and analyzed as it represents a complex system that is integral with the total system to be insulated. Numerous tank and calorimeter tests have been performed using many different insulation approaches. Many different variables have been tested and documented, mainly within the insulation system itself. There are several factors in insulation application that can drive up the heat load on the entire system. These include the treatment of insulation seams, instrumentation wires running through the insulation, and the integration of the insulation with the structures and fluids. Several attempts have been made to identify the performance losses due to structural integration with a real system. Due to the nature of MLI, these were tied to specific programs and configuration dependent. In an effort to understand the complex heat transfer mechanisms surrounding such systems, a series of calorimeter testing coupled with thermal modeling of the calorimeter tests was put into place. Testing showed that a buffer of micro-fiberglass material such as Cryolite is a robust method of closing out MLI penetrations. Additionally, a validated thermal model was used to develop parametric analysis far beyond the limitations of the calorimeter testing. This paper presents the methodology and approach, with experimental data providing the basis for developing the thermal model and its results for applicability to future design cases.

  13. Low-temperature thermal pre-treatment of municipal wastewater sludge: Process optimization and effects on solubilization and anaerobic degradation.

    Science.gov (United States)

    Nazari, Laleh; Yuan, Zhongshun; Santoro, Domenico; Sarathy, Siva; Ho, Dang; Batstone, Damien; Xu, Chunbao Charles; Ray, Madhumita B

    2017-04-15

    The present study examines the relationship between the degree of solubilization and biodegradability of wastewater sludge in anaerobic digestion as a result of low-temperature thermal pre-treatment. The main effect of thermal pre-treatment is the disintegration of cell membranes and thus solubilization of organic compounds. There is an established correlation between chemical oxygen demand (COD) solubilization and temperature of thermal pre-treatment, but results of thermal pre-treatment in terms of biodegradability are not well understood. Aiming to determine the impact of low temperature treatments on biogas production, the thermal pre-treatment process was first optimized based on an experimental design study on waste activated sludge in batch mode. The optimum temperature, reaction time and pH of the process were determined to be 80 °C, 5 h and pH 10, respectively. All three factors had a strong individual effect (p effect for temp. pH 2 (p = 0.002). Thermal pre-treatments, carried out on seven different municipal wastewater sludges at the above optimum operating conditions, produced increased COD solubilization of 18.3 ± 7.5% and VSS reduction of 27.7 ± 12.3% compared to the untreated sludges. The solubilization of proteins was significantly higher than carbohydrates. Methane produced in biochemical methane potential (BMP) tests, indicated initial higher rates (p = 0.0013) for the thermally treated samples (k hyd up to 5 times higher), although the ultimate methane yields were not significantly affected by the treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Effects of Climate Warming on Organic Carbon Degradation and Methylmercury Production in an Arctic Tundra Soil

    Science.gov (United States)

    Gu, B.; Yang, Z.; Lu, X.; Liang, L.; Graham, D. E.; Wullschleger, S. D.

    2016-12-01

    Climate warming increases microbial activity and stimulates the degradation of stored soil organic carbon (SOC) in Arctic tundra. Studies have shown that the rates of SOC degradation are affected by the substrate quality or chemical composition of SOC, but it remains unclear which pools of SOC are the most vulnerable to rapid breakdown and what mechanisms are involved. Additionally, little is known concerning the effects of warming on microbial mercury methylation and how it is coupled to SOC degradation. Using a suite of analytical techniques, we examined the dynamic consumption and production of labile SOC compounds, including reducing sugars, alcohols, and low-molecular-weight organic acids during an 8-month anoxic incubation with a high-centered polygon trough tundra soil from Barrow, Alaska. We show that reducing sugars and alcohols in thawed permafrost largely account for the initial rapid release of CO2 and CH4 through anaerobic fermentation, whereas the fermentation products such as acetate and formate are subsequently utilized as primary substrates for methanogenesis. Degradation of labile SOC is also found to rapidly fueling the biosynthesis of methylmercury, a potent neurotoxin in tundra soil. Mercury methylation is positively correlated to the production of CH4 and ferrous ion, suggesting the linkages among microbial pathways of methanogenesis, iron reduction, and mercury methylation. Additionally, we found that freshly amended mercury is more bioavailable and susceptible to microbial methylation than preexisting Hg, particularly in the deep mineral soil. These observations suggest that climate warming and permafrost thaw not only impact on the decomposition of stored SOC and emission of greenhouse gases but also increase production of toxic methylmercury in Arctic tundra.

  15. Photooxidative degradation of beer bittering principles: product analysis with respect to lightstruck flavour formation.

    Science.gov (United States)

    Huvaere, Kevin; Sinnaeve, Bart; Van Bocxlaer, Jan; De Keukeleire, Denis

    2004-09-01

    Isohumulones, the main bittering agents in beer, are decomposed by light-induced reactions, thereby leading to radical precursors on the pathway to lightstruck flavour formation. Excited flavins, formed on visible-light irradiation, readily interact with isohumulones, as well as with reduced and oxidized derivatives thereof. From identification of both volatile and non-volatile reaction products thus formed, feasible degradation mechanisms are proposed.

  16. Chromatographic and Spectrometric Identification of Propyl Isopropylphosphonofluoridate and its Degradation Products

    OpenAIRE

    Samuel Afful; V. Hakkinen and M. Soderstroms

    2010-01-01

    The study demonstrates how Gas Chromatography/Mass Spectrometry (GC/MS) and Liquid Chromatography/Mass Spectrometry (LC/MS) techniques are applied for identification of sarin type of nerve agents. A brief historical review of Chemical Weapon Convention (CWC) has been presented. GC/MS and LC/MS as analytical techniques have been used for the identification of Propyl isopropylphosphonofluoridate and its degradation products. W hile the Propyl isopropylphosphonofluoridate was identified with the...

  17. PRODUCTION AND RECOVERY OF POLY-Β-HYDROXYBUTYRATE FROM WHEY DEGRADATION BY AZOTOBACTER

    Directory of Open Access Journals (Sweden)

    A. Khanafari , A. Akhavan Sepahei, M. Mogharab

    2006-07-01

    Full Text Available Three strains of Azotobacter chroococcum were studied to produce poly-β hydroxybutyrate as a inclusion body by whey degradation. Optimum degradation whey results were obtained when using whey broth as a fermentation medium without extra salt, temperature at 35 °C and pH 7 (P<0.05. Lambda max for whey broth medium was determined probably about 400 nm. The effect of different nitrogenous rich compounds (NH4NO3, Bactopeptone, Casein, Yeast extract, Meat extract, Protease peptone and Tryptone on whey degradation showed that incorporation of nitrogenous compounds into the medium did not increase whey degradation by Azotobacter chroococcum 1723 (P<0.05. But poly-β hydroxyl-butyrate production was increased in presence Meat extract up to 75% of the cell dry weight after 48h. The addition of nitrogenous sourced (except ammonium nitrate had a positive effect on poly-β hydroxyl-butyrate production as it peaked in the presence of Meat extract and 4.43 g/L was accumulated in comparison to 0.5g at diazotrophically growing cells. Increasing the O2 values resulted by shaking at 122 rpm in decreased poly-β hydroxyl-butyrate yield form 4.43 to 0.04 g/L. The results show that this medium supports the growth of strain 1735 and also that this waste could be utilized as a carbon and nitrogen source. Production of poly-β hydroxyl-butyrate by using whey as a medium looks promising, since the use of inexpensive feed-stocks for poly-β hydroxyl-butyrate is essential if bioplastics are to become competitive products.

  18. Simultaneous Cellulose Degradation and Electricity Production by Enterobacter cloacae in a Microbial Fuel Cell▿

    OpenAIRE

    Rezaei, Farzaneh; Xing, Defeng; Wagner, Rachel; Regan, John M.; Richard, Tom L.; Logan, Bruce E.

    2009-01-01

    Electricity can be directly generated by bacteria in microbial fuel cells (MFCs) from many different biodegradable substrates. When cellulose is used as the substrate, electricity generation requires a microbial community with both cellulolytic and exoelectrogenic activities. Cellulose degradation with electricity production by a pure culture has not been previously demonstrated without addition of an exogenous mediator. Using a specially designed U-tube MFC, we enriched a consortium of exoel...

  19. Partial Transformation Products as Indicators of Microbial Hydrocarbon Degradation in Soils

    Science.gov (United States)

    Stringfellow, W. T.

    2001-12-01

    Monitored natural decay (intrinsic bioremediation), a cost-effective method for remediating contaminated property, is widely applied to fuel contaminated sites. If an intrinsic bioremediation approach could be supported for the clean up of polynuclear aromatic hydrocarbon (PAH) contaminated properties, millions of dollars in clean-up costs could potential be saved, especially in transfers of industrial properties that will continue to be used for industrial purposes. Proving intrinsic biodegradation of polynuclear aromatic hydrocarbons (PAHs) is problematic. Slow PAH biodegradation rates in contaminated soils mean that oxygen mass transfer rates into the soil exceeds bacterial oxygen demand. Likewise carbon dioxide production during degradation is sufficiently slow that carbon dioxide will not accumulate in the soil gas to levels exceeding background, uncontaminated soils. Therefore, oxygen depletion and carbon dioxide accumulation, typical indicators of intrinsic remediation activity at fuel contaminated sites, are of little use in demonstrating intrinsic PAH remediation. Additionally, direct measurement of PAH loss over time is of limited use in the absence of extensive historical records, especially at sites that are still emitting PAHs as part of their operations. PAH loss rates may be in the order of 10% per year, whereas combined sampling and analytical error can be greater than 50%. It is our hypothesis that PAH degradation products, such as aromatic carboxylic acids and dihydrodiols, will be present in soils where biodegradation is occurring and absent in soils that are biologically inactive. We have developed methods for the extraction of PAH biodegradation products from soils and the analysis of these metabolites by both gas chromatography and high performance liquid chromatography. We have tested our hypothesis against soils undergoing both active and passive bioremediation. Our results indicate that PAH degradation products are detectable in many soils

  20. Glucosinolate degradation products, alkanes and fatty acids from plants and cell cultures of Descurainia sophia.

    Science.gov (United States)

    Afsharypuor, S; Lockwood, G B

    1985-12-01

    Allyl and 3-butenyl isothiocyanate with two nitriles and an epithiobutane derivative were estimated. These glucosinolate degradation products were found in callus, seed, and dried plant but not in suspension cultures. Seventeen alkanes and five fatty acids were also identified and estimated in plant material and cultures. 4-Methylthiobutyl and 2-phenylethyl isothiocyanates were also detected in seeds. Incubation of cultures at 4° increased levels of the fatty acids but not isothiocyanates.

  1. Accelerated Thermal-Aging-Induced Degradation of Organometal Triiodide Perovskite on ZnO Nanostructures and Its Effect on Hybrid Photovoltaic Devices.

    Science.gov (United States)

    Kumar, S; Dhar, A

    2016-07-20

    Organometal halide perovskite materials are presently some of the pacesetters for light harvesting in hybrid photovoltaic devices because of their excellent inherent electrical and optical properties. However, long-term durability of such perovskite materials remains a major bottleneck for their commercialization especially in countries with hot and humid climatic conditions, thus violating the international standards for photovoltaic technology. Albeit, TiO2 as an electron-transport layer has been well investigated for perovskite solar cells; the high-temperature processing makes it unsuitable for low-cost and large-scale roll-to-roll production of flexible photovoltaic devices. Herein, we have chosen low-temperature (<150 °C)-processable nanostructured ZnO as the electron-selective layer and used a two-step method for sensitizing ZnO nanorods with methylammonium lead iodide (MAPbI3) perovskite, which is viable for flexible photovoltaic devices. We have also elaborately addressed the effect of the annealing duration on the conversion of a precursor solution into the required perovskite phase on ZnO nanostructures. The investigations show that the presence of ZnO nanostructures accelerates the rate of degradation of MAPbI3 films under ambient annealing and thus requires proper optimization. The role of ZnO in enhancing the degradation kinetics of the perovskite layer has been investigated by X-ray photoelectron spectroscopy and a buffer layer passivation technique. The effect of the annealing duration of the MAPbI3 perovskite on the optical, morphological, and compositional behavior has been closely studied and correlated with the photovoltaic efficiency. The study captures the degradation behavior of the commercially interesting MAPbI3 perovskite on a ZnO electron-transport layer and thus can provide insight for developing alternative families of perovskite material with better thermal and environmental stability for application in low-cost flexible photovoltaic

  2. Application of non-thermal plasma reactor for degradation and detoxification of high concentrations of dye Reactive Black 5 in water

    Directory of Open Access Journals (Sweden)

    Dojčinović Biljana P.

    2016-01-01

    Full Text Available Degradation and detoxification efficiency of high concentrations of commercially available reactive textile dye Reactive Black 5 solution (40, 80, 200, 500, 1000 mg L-1, were studied. Advanced oxidation processes in water falling film based dielectric barrier discharge as a non-thermal plasma reactor were used. For the first time, this reactor was used for the treatment of high concentrations of organic pollutants such as reactive textile dye Reactive Black 5 in water. Solution of the dye is treated by plasma as thin water solution film that is constantly regenerated. Basically, the reactor works as a continuous flow reactor and the electrical discharge itself takes place at the gas-liquid interphase. The dye solution was recirculated through the reactor with an applied energy density of 0-374 kJ L-1. Decolorization efficiency (% was monitored by UV-VIS spectrophotometric technique. Samples were taken after every recirculation (~ 22 kJ L-1 and decolorization percent was measured after 5 min and 24 h of plasma treatment. The efficiency of degradation (i.e. mineralization and possible degradation products were also tracked by determination of the chemical oxygen demand (COD and by ion chromatography (IC. Initial toxicity and toxicity of solutions after the treatment were studied with Artemia salina test organisms. Efficiency of decolorization decreased with the increase of the dye concentration. Complete decolorization, high mineralization and non-toxicity of the solution (<10 % were acomplished after plasma treatment using energy density of 242 kJ L-1, while the initial concentrations of Reactive Black 5 were 40 and 80 mg L-1. [Projekat Ministarstva nauke Republike Srbije, br. 172030 i br. 171034

  3. Deep geothermal sources for electricity production in Slovakia: thermal conditions

    Science.gov (United States)

    Majcin, Dušan; Král, Miroslav; Bilčík, Dušan; Šujan, Martin; Vranovská, Andrea

    2017-03-01

    The contribution presents the results of geothermic interpretation approaches applied to measured geothermal data and is focused to determination of the thermal conditions both for application of classic hydrothermal sources exploitation and specialized EGS technologies for electricity production in the region of Slovakia and adjacent areas. Primarily, the heat flow density data and the temperature distribution measurements in boreholes were interpreted by classic 1D interpolation and extrapolation methods. New terrestrial heat flow density map for the studied area was constructed using the values determined in boreholes, their interpretations, the newest outcomes of geothermal modelling methods based both on steady-state and transient heat transfer approaches, and on other recently gained geoscientific knowledge. Thereafter, we constructed the maps of temperature field distribution for selected depth levels up to 6000 m below the surface and the final map of the isothermal surface depths for the reservoir temperature of 160° C. This final map serves for the appraisal of the effective application of the binary cycle power plant technology in Slovakia in terms of thermal conditions.

  4. A kinetic study of the thermal degradation of cetyltrimethylammonium bromide inside the mesoporous SBA-3 molecular sieve

    Directory of Open Access Journals (Sweden)

    DJORDJE STOJAKOVIC

    2007-12-01

    Full Text Available The thermal degradation of cetyltrimethylammonium bromide (CTMAB inside the mesoporous SBA-3 was studied under non-isothermal conditions. There are two distinct and complex kinetic processes which partly overlap, each consisting of one dominant and three minor individual processes. The two dominant processes can be described by the Sestak–Berggren model. The main decomposition step (the first dominant process involves the overcoming of weak interactions between CTMAB and the silica network and proceeds with a lower Ea value (116±2 kJ mol‑1 than the second dominant process (153±5 kJ mol-1, which can be explained by the size reduction of the pore openings due to the contraction of the SBA-3 unit cell caused by the removal of CTMAB.

  5. Product differentiation during continuous-flow thermal gradient PCR.

    Science.gov (United States)

    Crews, Niel; Wittwer, Carl; Palais, Robert; Gale, Bruce

    2008-06-01

    A continuous-flow PCR microfluidic device was developed in which the target DNA product can be detected and identified during its amplification. This in situ characterization potentially eliminates the requirement for further post-PCR analysis. Multiple small targets have been amplified from human genomic DNA, having sizes of 108, 122, and 134 bp. With a DNA dye in the PCR mixture, the amplification and unique melting behavior of each sample is observed from a single fluorescent image. The melting behavior of the amplifying DNA, which depends on its molecular composition, occurs spatially in the thermal gradient PCR device, and can be observed with an optical resolution of 0.1 degrees C pixel(-1). Since many PCR cycles are within the field of view of the CCD camera, melting analysis can be performed at any cycle that contains a significant quantity of amplicon, thereby eliminating the cycle-selection challenges typically associated with continuous-flow PCR microfluidics.

  6. Dynamic Optimization and Production Planning of Thermal Cracking Operation

    Directory of Open Access Journals (Sweden)

    Emil H. Edwin

    2003-04-01

    Full Text Available This work addresses the dynamic optimization of the production period of thermal crackers with respect to coke formation in the cracking coil and transfer line exchanger. Optimal time dependent trajectories of feed rate, steam to hydrocarbon ratio, and reaction severity are calculated. The net earnings based on the price of hydrocarbons, kid, steam, decoking, and maintenance cost are maximized. All important operational constraints are included and the optimization problem is solved using parameterized free variable trajectories (piece wise constant and a standard SQP package. Rigorous distributed physical models are used and calculation show that dynamic optimization gives up to 2( earnings - expenses than conventional steady state optimization performed on the same models. This is in the same range as earnings reported from steady state optimization implementations alone.

  7. Differences between young adults and elderly in thermal comfort, productivity and thermal physiology in response to a moderate temperature drift

    DEFF Research Database (Denmark)

    Schellen, Lisje; Lichtenbelt, Wouter van Marken; Loomans, Marcel

    2010-01-01

    Results from naturally ventilated buildings show that allowing the indoor temperature to drift does not necessarily result in thermal discomfort and may allow for a reduction in energy use. However, for stationary conditions, several studies indicate that the thermal neutral temperature and optimum...... thermal condition differ between young adults and elderly. There is a lack of studies that describe the effect of aging on thermal comfort and productivity during a moderate temperature drift. In this study, the effect of a moderate temperature drift on physiological responses, thermal comfort......, temperature drift: first 4 h: +2 K/h, last 4 h: –2 K/h. The results indicate that thermal sensation of the elderly was, in general, 0.5 scale units lower in comparison with their younger counterparts. Furthermore, the elderly showed more distal vasoconstriction during both conditions. Nevertheless, TS...

  8. Formation, characterization, and thermal degradation behavior of a novel tricomponent aggregate of beta-cyclodextrin, ferrocene, and polypropylene glycol.

    Science.gov (United States)

    Song, Le Xin; Du, Fang Yun; Guo, Xue Qing; Pan, Shu Zhen

    2010-02-04

    A tricomponent aggregate PPG-Fc-beta-CD formed by polypropylene glycol (PPG), ferrocene (Fc), and beta-cyclodextrin (beta-CD) was obtained and characterized by a series of physical methods, such as (1)H nuclear magnetic resonance, flame atomic absorption spectrometry, high performance liquid chromatography, UV-vis absorption spectroscopy, thermogravimetry, and gas chromatography coupled to time-of-flight mass spectrometry. First, the tricomponent aggregate exhibited a component ratio of 1:28:32 (PPG/Fc/beta-CD) in the solid state, and showed a completely different order in thermal stability when compared with beta-CD: under a nitrogen atmosphere, beta-CD > PPG-Fc-beta-CD, and in a vacuum, PPG-Fc-beta-CD > beta-CD. Second, the appearance of two peculiar points p and q at the end of TG curve of the aggregate gave a strong impression that the degradation rate further increased after the sharp decomposition of the aggregate reached point p and the amount present in the residual fraction at point q about 780.0 K was lower than 1%, both of which were rather different from those reported previously. This finding implied that the molecular assembly resulting from the binding interaction among Fc, PPG, and beta-CD induced more efficiently the degradation of each of them. Third, an interesting phenomenon was found that the order of thermal release of the three assembled components in PPG-Fc-beta-CD was Fc > beta-CD > PPG. Results of this study provide some insight into an initial attempt to construct a supramolecule among a polymer, a coordination compound, and an organic compound.

  9. Delamination evaluation of thermal barrier coating on turbine blade owing to isothermal degradation using ultrasonic C-scan image

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ho Girl; Kim, Hak Joon; Song, Sung Jin; Seok, Chang Sung [Dept. of Mechanical Engineering, Sungkyunkwan University, Suwon (Korea, Republic of)

    2016-10-15

    Thermal barrier coating (TBC) is an essential element consisting of a super-alloy base and ceramic coating designed to achieve long operational time under a high temperature and pressure environment. However, the top coat of TBC can be delaminated at certain temperatures with long operation time. As the delamination of TBC is directly related to the blade damage, the coupling status of the TBC should be assured for reliable operation. Conventional studies of nondestructive evaluation have been made for detecting generation of thermally grown oxide (TGO) or qualitatively evaluating delamination in TBC. In this study, the ultrasonic C-scan method was developed to obtain the damage map inside TBC by estimating the delamination in a quantitative way. All specimens were isothermally degraded at 1,100°C with different time, having different partial delamination area. To detect partial delamination in TBC, the C-scan was performed by a single transducer using pulse-echo method with normal incidence. Partial delamination coefficients of 1 mm to 6 mm were derived by the proportion of the surface reflection signal and flaw signal which were theoretical signals using Rogers-Van Buren and Kim's equations. Using the partial delamination coefficients, the partial delamination maps were obtained. Regardless of the partial delamination coefficient, partial delamination area was increased when degradation time was increased in TBC. In addition, a decrease in partial delamination area in each TBC specimen was observed when the partial delamination coefficient was increased. From the portion of the partial delamination maps, the criterion for delamination was derived.

  10. Determination of bifonazole and identification of its photocatalytic degradation products using UPLC-MS/MS.

    Science.gov (United States)

    Kryczyk, Agata; Żmudzki, Paweł; Hubicka, Urszula

    2017-09-01

    The main goal of the presented work was to investigate the effect of ZnO or/and TiO 2 on the stability of bifonazole in solutions under UVA irradiation. To this end, a simple and reproducible UPLC method for the determination of bifonazole in the presence of its photocatalytic degradation products was developed. Linearity was studied in the range of 0.0046-0.15 mg mL -1 with a determination coefficient of 0.9996. Bifonazole underwent a photocatalytic degradation process under the experimental conditions used. Comparative studies showed that combination of TiO 2 /ZnO (1:1 w/w) was a more effective catalyst than TiO 2 or ZnO with a degradation rate of up to 67.57% after 24 h of irradiation. Further, kinetic analyses indicated that the photocatalytic degradation of bifonazole in the mixture of TiO 2 /ZnO can be described by a pseudo-first order reaction. Statistical comparison clearly indicated that the presence of TiO 2 /ZnO also affected the stability of bifonazole from a cream preparation after 15 h of UVA exposure (p photocatalytic transformation of bifonazole in the presence of ZnO or/and TiO 2 involves hydroxylation of the methanetriyl group and/or adjacent phenyl rings and cleavage of the imidazole moiety. Copyright © 2017 John Wiley & Sons, Ltd.

  11. Degradation and metabolism of synthetic plastics and associated products by Pseudomonas sp.: capabilities and challenges.

    Science.gov (United States)

    Wilkes, R A; Aristilde, L

    2017-09-01

    Synthetic plastics, which are widely present in materials of everyday use, are ubiquitous and slowly-degrading polymers in environmental wastes. Of special interest are the capabilities of microorganisms to accelerate their degradation. Members of the metabolically diverse genus Pseudomonas are of particular interest due to their capabilities to degrade and metabolize synthetic plastics. Pseudomonas species isolated from environmental matrices have been identified to degrade polyethylene, polypropylene, polyvinyl chloride, polystyrene, polyurethane, polyethylene terephthalate, polyethylene succinate, polyethylene glycol and polyvinyl alcohol at varying degrees of efficiency. Here, we present a review of the current knowledge on the factors that control the ability of Pseudomonas sp. to process these different plastic polymers and their by-products. These factors include cell surface attachment within biofilms, catalytic enzymes involved in oxidation or hydrolysis of the plastic polymer, metabolic pathways responsible for uptake and assimilation of plastic fragments and chemical factors that are advantageous or inhibitory to the biodegradation process. We also highlight future research directions required in order to harness fully the capabilities of Pseudomonas sp. in bioremediation strategies towards eliminating plastic wastes. © 2017 The Society for Applied Microbiology.

  12. Activity of nanosized titania synthesized from thermal decomposition of titanium (IV n-butoxide for the photocatalytic degradation of diuron

    Directory of Open Access Journals (Sweden)

    Jitlada Klongdee, Wansiri Petchkroh, Kosin Phuempoonsathaporn, Piyasan Praserthdam, Alisa S. Vangnai and Varong Pavarajarn

    2005-01-01

    Full Text Available Nanoparticles of anatase titania were synthesized by the thermal decomposition of titanium (IV n-butoxide in 1,4-butanediol. The powder obtained was characterized by various characterization techniques, such as XRD, BET, SEM and TEM, to confirm that it was a collection of single crystal anatase with particle size smaller than 15 nm. The synthesized titania was employed as catalyst for the photodegradation of diuron, a herbicide belonging to the phenylurea family, which has been considered as a biologically active pollutant in soil and water. Although diuron is chemically stable, degradation of diuron by photocatalyzed oxidation was found possible. The conversions achieved by titania prepared were in the range of 70–80% within 6 h of reaction, using standard UV lamps, while over 99% conversion was achieved under solar irradiation. The photocatalytic activity was compared with that of the Japanese Reference Catalyst (JRC-TIO-1 titania from the Catalysis Society of Japan. The synthesized titania exhibited higher rate and efficiency in diuron degradation than reference catalyst. The results from the investigations by controlling various reaction parameters, such as oxygen dissolved in the solution, diuron concentration, as well as light source, suggested that the enhanced photocatalytic activity was the result from higher crystallinity of the synthesized titania.

  13. Effect of polyethelene oxide on the thermal degradation of cellulose biofilm - Low cost material for soft tissue repair in dentistry.

    Science.gov (United States)

    Akkus, Anna; Tyler, Rakim; Schiraldi, David; Roperto, Renato; Faddoul, Fady; Teich, Sorin

    2017-07-01

    Bio cellulose is a byproduct of sweet tea fermentation known as kombusha. During the biosynthesis by bacteria cellulose chains are polymerized by enzyme from activated glucose. The single chains are then extruded through the bacterial cell wall. Interestingly, a potential of the Kombucha's byproduct bio cellulose (BC) as biomaterial had come into focus only in the past few decades. The unique physical and mechanical properties such as high purity, an ultrafine and highly crystalline network structure, a superior mechanical strength, flexibility, pronounced permeability to gases and liquids, and an excellent compatibility with living tissue that reinforced by biodegradability, biocompatibility, large swelling ratios. The bio-cellulose film specimens were provided by the R.P Dressel dental materials laboratory, Department of Comprehensive Care, School of Dental Medicine, Case Western Reserve University, Cleveland, US. The films were harvested, washed with water and dried at room temperature overnight. 1wt% of PEG-2000 and 10wt% of NaOH were added into ultrapure water to prepare PEG/NaOH solution. Then bio-cellulose film was added to the mixture and swell for 3 h at room temperature. All bio-cellulose film specimens were all used in the TA Instruments Q500 Thermogravmetric Analyzer to investigate weight percent lost and degradation. The TGA was under ambient air conditions at a heating rate of 10ºC/min. PEG control exhibited one transition with the peak at 380ºC. Cellulose and cellulose/ PEG films showed 3 major transitions. Interestingly, the cellulose/PEG film showed slightly elevated temperatures when compared to the corresponding transitions for cellulose control. The thermal gravimetric analysis (TGA) degradation curves were analyzed. Cellulose control film exhibited two zero order transitions, that indicate the independence of the rate of degradation from the amount on the initial substance. The activation energies for three transitions for cellulose and

  14. The Assessment of Cement Mortars after Thermal Degradation by Acoustic Non-destructive Methods

    Science.gov (United States)

    Topolář, L.; Štefková, D.; Hoduláková, M.

    2017-10-01

    Thanks, the terrorist attacks on the worldwide interest in the design of structures for fire greatly increased. One of the advantages of concrete over other building materials is its inherent fire-resistive properties. The concrete structural components still must be able to withstand dead and live loads without collapse even though the rise in temperature causes a decrease in the strength and modulus of elasticity for concrete and steel reinforcement. In addition, fully developed fires cause expansion of structural components and the resulting stresses and strains must be resisted. This paper reports the results of measurements by Impact-echo method and measurement by ultrasound. Both methods are based on the acoustic properties of the material which are dependent on its condition. These acoustic methods allow identifying defects and are thus suitable for monitoring the building structure condition. The results are obtained in the laboratory during the degradation of composite materials based on cement by high-temperature.

  15. Kinetics of mechanical, thermal and oxidative degradation and solution properties of polymers in relation to their use as polymeric actives in lubricating oils. DGMK-project 149

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J.; Mueller, H.G.

    1979-01-01

    Oxidative and thermal degradation of 10 W/50 multigrade motor oils have been investigated in a laboratory test. Changes of viscosity and of molecular weight distribution of polymers have been studied. Shear degradation of polymers in dilute solution has been studied by following the change of molecular weight distribution curves as a function of time by gel permeation chromatography. Rate constants of the degradation reaction are determined as functions of system parameters as e.g. molecular weight, shear stress and polymer concentration. Mechanical shear degradation is found to be a first order process. Rate of degradation is directly proportional to the hydrodynamic volume of the macromolecules. Measurement of solution properties of polymers in oil shows that polymer coils either expand or contract with increasing temperature depending on their chemical structure. On the basis of these results a new more general concept is presented to explain the mechanism of action of viscosity index improvers.

  16. Phosphorus, carbon- and nitrogen interactions in productive and degraded tropical pastures

    Science.gov (United States)

    Oberson, A.; Hegglin, D. D.; Nesper, M.; Rao, I.; Fonte, S.; Ramirez, B.; Velasquez, J.; Tamburini, F.; Bünemann, E. K.; Frossard, E.

    2011-12-01

    Pastures are the main land use in deforested areas of tropical South America. The highly weathered soils of these regions usually have low total and available phosphorus (P) contents. Low P availability can strongly limit plant and animal productivity and other soil ecosystem functions. Most introduced pastures of Brachiaria spp. are grass-alone (GA) while some are grass-legume (GL) pastures. The majority of the introduced pastures, particularly the grass-alone are at some state of degradation (GD). Pasture degradation induces severe loss of plant biomass production, with drastic ecological and economic implications. Although the importance of P deficiency in pasture degradation has been recognized, the knowledge generated on stoichiometry of carbon (C), nitrogen (N) and P along pathways of the nutrient cycles of pastures, with different botanical composition and productivity, has been very limited. We will present results of a case study realized during 2010 to 2011 in the forest margins agro-ecosystem of the department of Caquetá, Colombia. Our objectives were to determine: i) whether P availability is lower in degraded compared to productive pastures, and ii) whether the introduction of legumes in the pasture increases P availability through enhanced biological P cycling through plant growth, plant litter decomposition and the soil microbial biomass; and iii) whether pasture types (GA vs GL) and the state of pasture degradation affect the C:N:P ratios in nutrient pools of the soil-plant system. An on-farm study was conducted on nine farms in the department of Caquetá, Colombia. On every farm three different pasture types were studied: degraded grass alone pastures (GD), productive grass-alone pastures (GA) and productive grass-legume pastures (GL). Basic soil characteristics and indicators on soil P status, microbial P cycling, plant biomass production, plant litter deposition and nutrient concentrations in plant tissue were determined. Analysis of P, C and N

  17. Mechanical, Thermal Degradation, and Flammability Studies on Surface Modified Sisal Fiber Reinforced Recycled Polypropylene Composites

    Directory of Open Access Journals (Sweden)

    Arun Kumar Gupta

    2012-01-01

    Full Text Available The effect of surface treated sisal fiber on the mechanical, thermal, flammability, and morphological properties of sisal fiber (SF reinforced recycled polypropylene (RPP composites was investigated. The surface of sisal fiber was modified with different chemical reagent such as silane, glycidyl methacrylate (GMA, and O-hydroxybenzene diazonium chloride (OBDC to improve the compatibility with the matrix polymer. The experimental results revealed an improvement in the tensile strength to 11%, 20%, and 31.36% and impact strength to 78.72%, 77%, and 81% for silane, GMA, and OBDC treated sisal fiber reinforced recycled Polypropylene (RPP/SF composites, respectively, as compared to RPP. The thermogravimetric analysis (TGA, differential scanning calorimeter (DSC, and heat deflection temperature (HDT results revealed improved thermal stability as compared with RPP. The flammability behaviour of silane, GMA, and OBDC treated SF/RPP composites was studied by the horizontal burning rate by UL-94. The morphological analysis through scanning electron micrograph (SEM supports improves surface interaction between fiber surface and polymer matrix.

  18. Mechanistic Study on the Degradation of Thermal Barrier Coatings Induced by Volcanic Ash Deposition

    Science.gov (United States)

    Arai, Masayuki

    2017-08-01

    Thermal stress generated on thermal barrier coatings (TBCs) by volcanic ash (VA) deposition was assessed measuring the tip deflection of a multilayered beam structure as a function of temperature. The TBC in this study was deposited onto the surface of a blade utilized in a land-based gas turbine which is composed of 8 wt.%Y2O3-ZrO2/CoNiCrAlY on a Ni-based superalloy. The VA-deposited TBC sample was heated at 1453 K, and the effect of VA deposition on TBC delamination was examined in comparison with a TBC sample without VA deposition as a reference. On the basis of the VA attack damage mechanism which was investigated via the tip deflection measurement and a comprehensive microstructure examination, a damage-coupled constitutive model was proposed. The proposed model was based on the infiltration of the molten VA inside pores and phase transformations of yttria -tabilized zirconia in the TBC system. The numerical analysis results, which were simulated utilizing the finite element code installing the developed constitutive model, showed us that VA attack on the TBC sample induced near-interfacial cracks because of a significant increasing in the coating stress.

  19. Photodegradation of sparfloxacin and isolation of its degradation products by preparative HPLC

    Directory of Open Access Journals (Sweden)

    E. E.S. Schapoval

    2009-01-01

    Full Text Available

    Sparfloxacin, a third generation fluoroquinolone derivative, is a potent antibacterial agent active against a wide range of Gram-positive and Gram-negative organisms including Streptococcus pneumoniae, Staphylococcus aureus, methicillin resistant S. aureus, Legionella spp., Mycoplasma spp., Chlamydia spp. and Mycobacterium spp. A drawback of fluoroquinolones is their photoreactivity. Sparfloxacin has been studied in terms of therapeutic activities. However, there are few published of analytical methods being applied to sparfloxacin. The aim in this study was to determine the photodegradation products of sparfloxacin, when submitted to UV light, and to characterize two of these products, designated SPAX-PDP1 and SPAX-PDP2. An accelerated study of stability in methanol solution was carried out by exposing a solution of sparfloxacin to UV light (peak wavelength 290 nm for 36 hours at room temperature. The products were analyzed by NMR spectrophotometry, IR spectrometry and mass spectrophotometry. The results suggest that the products isolated here could be used to estimate the degradation of sparfloxacin in a stability study. However, the low activity exhibited by UV-irradiated sparfloxacin is a source of concern that demands further investigation of the mechanism of its photodegradation mechanism. Keywords: Degradation products, fluoroquinolone, photodegradation, quality control, sparfloxacin, stability.

  20. Shelf-stable egg-based products processed by high pressure thermal sterilization

    Science.gov (United States)

    Producing a thermally sterilized egg-based product with increased shelf life without losing the sensory and nutritional properties of the freshly prepared product is challenging. Until recently, all commercial shelf-stable egg-based products were sterilized using conventional thermal processing; how...

  1. Investigation the Influence of Different Salts on the Degradation of Organic Dyes Using Non-Thermal Plasma

    Directory of Open Access Journals (Sweden)

    Ahmed El-Tayeb

    2016-10-01

    Full Text Available In dye decolorization tests a non-thermal plasma (NTP corona discharge generated by a high voltage pin-to-ground plate displayed 82% color removal within 11 min. Total color removal was accomplished after 28 min. Different salts such as KCl, NaCl, CaCl2 and AlCl3 were utilized to check the influence of conductivity changes on the dye decolorization process. Higher dye solution conductivity improved the color removal efficiency. The discharge energy and degradation efficiency were computed for diverse concentrations for NaCl, KCl, CaCl2 and AlCl3, whereby it was noticed that the salts generally have a small impact on the level of dye decolorization using corona discharge. In addition, the essential reactive species involved in the oxidation of organic dye compounds such as ozone (O3 generated in treated water and hydrogen peroxide (H2O2 were investigated and the energetic species that produced the non-thermal plasma at the optimum operation time were determined. Energy yields for decolorization and Electrical Energy per Order (EE/O were calculated for different concentrations of NaCl, KCl, CaCl2 and AlCl3. This work may help in designing plasma systems appropriate for treatment of industrial wastewaters polluted by dyes.

  2. Maize production and land degradation: a Portuguese agriculture field case study

    Science.gov (United States)

    Ferreira, Carla S. S.; Pato, João V.; Moreira, Pedro M.; Valério, Luís M.; Guilherme, Rosa; Casau, Fernando J.; Santos, Daniela; Keizer, Jacob J.; Ferreira, António J. D.

    2016-04-01

    While food security is a main challenge faced by human kind, intensive agriculture often leads to soil degradation which then can threaten productivity. Maize is one of the most important crops across the world, with 869 million tons produced worldwide in 2012/2013 (IGC 2015), of which 929.5 thousand tons in Portugal (INE 2014). In Portugal, maize is sown in April/May and harvest occurs generally in October. Conventional maize production requires high inputs of water and fertilizers to achieve higher yields. As Portuguese farmers are typically rather old (on average, 63 years) and typically have a low education level (INE 2014), sustainability of their land management practises is often not a principal concern. This could explain why, in 2009, only 4% of the Portuguese temporary crops were under no-tillage, why only 8% of the farmers performed soil analyses in the previous three years, and why many soils have a low organic matter content (INE 2014). Nonetheless, sustainable land management practices are generally accepted to be the key to reducing agricultural soil degradation, preventing water pollution, and assuring long-term crop production objectives and food security. Sustainable land management should therefore not only be a concern for policy makers but also for farmers, since land degradation will have negative repercussions on the productivity, thus, on their economical income. This paper aims to assess the impact of maize production on soil properties. The study focusses on an 8 ha maize field located in central Portugal, with a Mediterranean climate on a gently sloping terrain (fertilizers (solid, liquid and both). Centre pivot irrigation was largely used. Data is available from 2003, and concerns crop yield, fertilization and irrigation practices, as well as soil properties assessed through occasional laboratorial analyses (pH, organic matter content, available phosphorous and potassium, exchangeable sodium, calcium, magnesium and potassium, as well as

  3. Validated methods for determination of yohimbine hydrochloride in the presence of its degradation products

    Directory of Open Access Journals (Sweden)

    M. Farouk

    2011-12-01

    Full Text Available Two simple, accurate and sensitive and techniques have been developed and validated for the determination of yohimbine hydrochloride in presence of its acid, alkaline and photo-degradates as stability-indicating studies. First spectrophotometric technique was adopted for the determination of the investigated drug in presence of degradation products, by the use of derivative and derivative ratio methods, respectively, while the second technique utilized a high-performance liquid chromatography for the determination of yohimbine hydrochloride in presence of its degradation products, as stability indicating method. The chromatographic separation was achieved isocratically by using a mobile phase of water and methanol in a ratio of 55:45 V/V containing 0.5% triethylamine. The analysis was carried out using C18 (4.6 × 150 mm, 5 μm at flow rate of 1.0 ml/min and UV detection at 270 nm. All the proposed methods were validated according to the International Conference on Harmonization (ICH guidelines and successfully applied for determination of the drug in pure form, in laboratory prepared mixtures and in pharmaceutical preparations. The obtained results were statistically compared to the official method of analysis for yohimbine hydrochloride and no significant differences were found.

  4. Identification and characterization of forced degradation products of pralatrexate injection by LC-PDA and LC-MS.

    Science.gov (United States)

    Sastry, R V R Prabhakara; Venkatesan, C S; Sastry, B S; Mahesh, K

    2016-11-30

    Pralatrexate (PTXT) is an antineoplastic folate analog and the chemical name is (2S)-2-[[4-[(1RS)-1-[(2,4-diaminopteridin-6-yl)methyl]but-3-ynyl] benzoyl] amino] pentanedioic acid. Degradation products of PTXT drug product (DP) under different forced degradation conditions have been studied using LC-PDA and LC-MS techniques. PTXT DP was subjected to forced degradation under the conditions of hydrolysis, photolysis, oxidation, and heat in accordance with ICH guidelines. The LC-MS compatible HPLC method was developed and stressed solutions were chromatographed on reversed phase HPLC. The degradation products were monitored at a wavelength of 242nm. Stress study revealed that PTXT was sensitive towards acid, alkali, peroxide, light and heat. The degradation impurities (I-IX) were identified and characterized using LC-PDA and mass spectral data. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Advanced oxidation kinetics and mechanism of preservative propylparaben degradation in aqueous suspension of TiO2 and risk assessment of its degradation products.

    Science.gov (United States)

    Fang, Hansun; Gao, Yanpeng; Li, Guiying; An, Jibin; Wong, Po-Keung; Fu, Haiying; Yao, Side; Nie, Xiangping; An, Taicheng

    2013-03-19

    The absolute kinetic rate constants of propylparaben (PPB) in water with different free radicals were investigated, and it was found that both hydroxyl radicals (HO(•)) and hydrated electrons could rapidly react with PPB. The advanced oxidation kinetics and mechanisms of PPB were investigated using photocatalytic process as a model technology, and the degradation was found to be a pseudo-first-order model. Oxidative species, particularly HO(•), were the most important reactive oxygen species mediating photocatalytic degradation of PPB, and PPB degradation was found to be significantly affected by pH because it was controlled by the radical reaction mechanism and was postulated to occur primarily via HO(•)-addition or H-abstraction reactions on the basis of pulse radiolysis measurements and observed reaction products. To investigate potential risk of PPB to humans and aqueous organisms, the estrogenic assays and bioassays were performed using 100 μM PPB solution degraded by photocatalysis at specific intervals. The estrogenic activity decreased as PPB was degraded, while the acute toxicity at three trophic levels first increased slowly and then decreased rapidly as the total organic carbon decreased during photocatalytic degradation.

  6. Energy Address Delivery Technologies and Thermal Transformations in Food Production

    Directory of Open Access Journals (Sweden)

    Burdo O.G.

    2016-08-01

    Full Text Available In this article, energetic and technical paradoxes in food nanotechnologies and traditional approaches to evaluation of energy recourses using are considered. Hypotheses of improvement of food production energy technologies are formulated. Classification of principles of address delivery of energy to food raw materials elements is given. We had substantiated the perspective objectives for heat-pumps installations and biphasic heat-transfer systems. The energy efficiency of new technolo-gies is compared on base of the number of energy impact. Principles of mass transfer modeling in ex-traction, dehydration and pasteurization combined processes are considered by food production exam-ple. The objectives of mathematical modeling of combined hydrodynamic and heat and mass transfer processes in modern energy technologies are set. The fuel energy conversion diagrams for drying, in-novative installations on the base of thermal siphons, heat pumps and electromagnetic energy genera-tors are represented. In this article, we illustrate how electromagnetic field, biphasic heat-transfer sys-tems and heat pumps can be effective tools for energy efficiency technologies.

  7. Sorption and degradation of pharmaceuticals and personal care products (PPCPs) in soils.

    Science.gov (United States)

    Yu, Yong; Liu, Yin; Wu, Laosheng

    2013-06-01

    Pharmaceuticals and personal care products (PPCPs) are one class of the most urgent emerging contaminants, which have drawn much public and scientific concern due to widespread contamination in aquatic environment. Most studies on the environmental fate and behavior of PPCPs have focused on nonsteroidal anti-inflammatory drugs. Some other compounds with high concentrations were less mentioned. In this study, sorption and degradation of five selected PPCPs, including bisphenol A (BPA), carbamazepine (CBZ), gemfibrozil (GFB), octylphenol (OP), and triclosan (TCS) have been investigated using three different soils. Sorption isotherms of all tested PPCPs in soils were well described by Freundlich equation. TCS and OP showed moderate to strong sorption, while the sorption of GFB and CBZ in soils was negligible. Degradation of PPCPs in three soils was generally fitted first-order exponential decay model, with half-lives (t 1/2) varying from 9.8 to 39.1 days. Sterilization could prolong the t 1/2 of PPCPs in soil, indicating that microbial activity played an important role in the degradation of these chemicals in soils. Degradation of PPCPs in soils was also influenced by the soil organic carbon (f oc) contents. Results from our data show that sorption to the soils varied among the different PPCPs, and their sorption affinity on soil followed the order of TCS > OP > BPA > GFB > CBZ. The degradation of the selected PPCPs in soil was influenced by the microbial activity and soil type. The poor sorption and relative persistence of CBZ suggest that it may pose a high leaching risk for groundwater contamination when recycled for irrigation.

  8. Photocatalytic and photoelectrocatalytic degradation of the drug omeprazole on nanocrystalline titania films in alkaline media: Effect of applied electrical bias on degradation and transformation products.

    Science.gov (United States)

    Tantis, Iosif; Bousiakou, Leda; Frontistis, Zacharias; Mantzavinos, Dionissios; Konstantinou, Ioannis; Antonopoulou, Maria; Karikas, George-Albert; Lianos, Panagiotis

    2015-08-30

    Photocatalytic and photoelectrocatalytic degradation of the drug omeprazole has been studied in the presence of nanocrystalline titania films supported on glass slides or transparent FTO electrodes in alkaline environment. Its photocatalytic degradation rate was assessed by its UV absorbance and by HPLC, while its transformation products were analyzed by HR-LC-MS. Based on UV absorbance, omeprazole can be photocatalytically degraded at an average rate of 6.7×10(-4)min(-1) under low intensity UVA irradiation of 1.5mWcm(-2) in the presence of a nanoparticulate titania film. This corresponds to degradation of 1.4mg of omeprazole per gram of the photocatalyst per liter of solution per hour. The photodegradation rate can be accelerated in a photoelectrochemical cell by applying a forward bias. In this case, the maximum rate reached under the present conditions was 11.6×10(-4)min(-1) by applying a forward bias of +0.6V vs. Ag/AgCl. Four major transformation products were successfully identified and their profiles were followed by HR-LC-MS. The major degradation path includes the scission of the sulfoxide bridge into the corresponding pyridine and benzimidazole ring derivates and this is accompanied by the release of sulfate anions in the reaction mixture. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. A stability indicating HPLC method for determination of mebeverine in the presence of its degradation products and kinetic study of its degradation in oxidative condition.

    Science.gov (United States)

    Souri, E; Aghdami, A Negahban; Adib, N

    2014-01-01

    An HPLC method for determination of mebeverine hydrochloride (MH) in the presence of its degradation products was developed. The degradation of MH was studied under hydrolysis, oxidative and photolysis stress conditions. Under alkaline, acidic and oxidative conditions, degradation of MH was observed. The separation was performed using a Symmetry C18 column and a mixture of 50 mM KH2PO4, acetonitrile and tetrahydrfuran (THF) (63:35:2; v/v/v) as the mobile phase. No interference peaks from degradation products in acidic, alkaline and oxidative conditions were observed. The linearity, accuracy and precision of the method were studied. The method was linear over the range of 1-100 μg/ml MH (r(2)>0.999) and the CV values for intra-day and inter-day variations were in the range of 1.0-1.8%. The limit of quantification (LOQ) and the limit of detection (LOD) of the method were 1.0 and 0.2 μg/ml, respectively. Determination of MH in pharmaceutical dosage forms was performed using the developed method. Furthermore the kinetics of the degradation of MH in the presence of hydrogen peroxide was investigated. The proposed method could be a suitable method for routine quality control studies of mebeverine dosage forms.

  10. Urinary collagen degradation products as early markers of progressive renal fibrosis

    DEFF Research Database (Denmark)

    Hijmans, Ryanne S.; Rasmussen, Daniel Guldager Kring; Yazdani, Saleh

    2017-01-01

    Background: Renal fibrogenesis is associated with increased ECM remodeling and release of collagen fragments in urine in progressive renal disease. We investigated the diagnostic value of urinary collagen degradation products in a proteinuria-driven fibrosis rat model with and without anti......-fibrotic S1P-receptor modulator FTY720 treatment. Methods: Proteinuria was induced in male Wistar rats by Adriamycin (ADR) injection (n = 16). Healthy rats served as controls (n = 12). Six weeks post-injection, all underwent renal biopsy, and FTY720-treatment started in ADR-rats (n = 8) and controls (n = 6......). Others remained untreated. Rats were sacrificed after 12 weeks. Collagen type I (C1M) and III (C3M) degradation fragments were measured in blood and urine using ELISA. Kidneys were stained for various inflammatory and fibrotic markers. Results: Six weeks post-injection proteinuria increased (versus...

  11. Manipulating Protein Degradability in the Rumen to Support Higher Ruminant Production

    Directory of Open Access Journals (Sweden)

    Budi Haryanto

    2014-09-01

    Full Text Available Dietary protein is digested to a certain extent in the rumen causing decreases its potency as source of amino acids for the animal. Dietary protein should mostly reach the intestines where the protein digestion takes place and absorption occurs in the form of intact amino acids and subsequently becomes nutrient deposition in muscles or milk. The higher muscle or milk protein synthesis, the higher the protein in the products of animal, as long as energy for the metabolism is available. Strategies of feeding rumen degradable versus undegradable protein in ruminant have become a research interest for decades. Technologies of dietary protein protection to reduce its degradability in the rumen by heating, chelating or coating have been developed.

  12. Lignin degradation, ligninolytic enzymes activities and exopolysaccharide production by Grifola frondosa strains cultivated on oak sawdust

    Science.gov (United States)

    Fernandes, Nona A.; Isikhuemhen, Omoanghe S.; Ohimain, Elijah I.

    2011-01-01

    Fourteen strains of Grifola frondosa (Dicks.) S. F. Gray, originating from different regions (Asia, Europe and North America) were tested for lignin degradation, ligninolytic enzyme activities, protein accumulation and exopolysaccharide production during 55 days of cultivation on oak sawdust. Lignin degradation varied from 2.6 to7.1 % of dry weight of the oak sawdust substrate among tested strains. The loss of dry matter in all screened fungi varied between 11.7 and 33.0%, and the amount of crude protein in the dry substrate varied between 0.94 to 2.55%. The strain, MBFBL 596, had the highest laccase activity (703.3 U/l), and the maximum peroxidase activity of 22.6 U/l was shown by the strain MBFBL 684. Several tested strains (MBFBL 21, 638 and 662) appeared to be good producers of exopolysaccharides (3.5, 3.5 and 3.2 mg/ml respectively). PMID:24031728

  13. Kinetics study of metaxalone degradation under hydrolytic, oxidative and thermal stress conditions using stability-indicating HPLC method

    Directory of Open Access Journals (Sweden)

    Vamsi Krishna Marothu

    2012-12-01

    Full Text Available An isocratic stability indicating RP-HPLC–UV method is presented for the determination of metaxalone (MET in the presence of its degradation products. The method uses Dr. Maisch C18 column (250 mm×4.6 mm, 5 μm with mobile phase consisting of acetonitrile–potassium dihydrogen orthophosphate buffer with 4 mL of 0.4% triethyl amine (pH 3.0; 10 mM (58:42, v/v at a flow rate of 1.0 mL/min. pH of the buffer was adjusted with o-phosphoric acid. UV detection was performed at 225 nm. The method was validated for specificity, linearity, precision, accuracy, limit of detection, limit of quantification and robustness. The calibration plot was linear over the concentration range of 1–100 μg/mL having a correlation coefficient (r2 of 0.999. Limits of detection and quantification were 0.3 and 1 μg/mL, respectively. Intra-day and inter-day precision (% RSD was 0.65 and 0.79 respectively. The proposed method was used to investigate the degradation kinetics of MET under different stress conditions employed. Degradation of MET followed a pseudo-first-order kinetics, and rate constant (K, time left for 50% potency (t1/2, and time left for 90% potency (t90 were calculated. Keywords: Metaxalone, Degradation kinetics, RP-HPLC–UV

  14. Newly identified degradation products of ceftiofur and cephapirin impact the analytical approch for quantitative analysis of kidney

    NARCIS (Netherlands)

    Berendsen, B.J.A.; Essers, M.L.; Mulder, P.P.J.; Bruchem, van G.D.; Lommen, A.; Overbeek, van W.M.; Stolker, A.A.M.

    2009-01-01

    This paper describes our research on the degradation of ceftiofur and cephapirin at physiological temperatures in kidney extract and in alkaline and acidic solution, conditions that regularly occur during sample preparation. Degradation products were identified using LC¿ToF/MS, NMR and

  15. Point of no return? Rehabilitating degraded soils for increased crop productivity on smallholder farms in eastern Zimbabwe

    NARCIS (Netherlands)

    Nezomba, H.; Mtambanengwe, F.; Tittonell, P.A.; Mapfumo, P.

    2015-01-01

    Soil degradation is a major threat to Southern Africa's agricultural production. Crops show generally weak responses to mineral fertilizers on degraded soils. A three-year study was conducted between 2009 and 2012 on smallholder farms in eastern Zimbabwe to explore entry points for rehabilitating

  16. Aqueous photodegradation of 4-tert-butylphenol: By-products, degradation pathway and theoretical calculation assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Yanlin [State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China); Shi, Jin; Chen, Hongche [Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention, Department of Environmental Science & Engineering, Fudan University, Shanghai 200433 (China); Zhao, Jianfu [State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China); Dong, Wenbo, E-mail: wbdong@fudan.edu.cn [Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention, Department of Environmental Science & Engineering, Fudan University, Shanghai 200433 (China)

    2016-10-01

    4-tert-butylphenol (4-t-BP), an endocrine disrupting chemical, is widely distributed in natural bodies of water but is difficult to biodegrade. In this study, we focused on the transformation of 4-t-BP in photo-initiated degradation processes. The steady-state photolysis and laser flash photolysis (LFP) experiments were conducted in order to elucidate its degradation mechanism. Identification of products was performed using the GC–MS, LC-MS and theoretical calculation techniques. The oxidation pathway of 4-t-BP by hydroxyl radical (HO·) was also studied and H{sub 2}O{sub 2} was added to produce HO·. 4-tert-butylcatechol and 4-tert-butylphenol dimer were produced in 4-t-BP direct photolysis. 4-tert-butylcatechol and hydroquinone were produced by the oxidation of HO·. But the formation mechanism of 4-tert-butylcatechol in the two processes was different. The benzene ring was fractured in 4-t-BP oxidation process and 29% of TOC was degraded after 16 h irradiation. - Highlights: • Photodegradation of 4-t-BP, an endocrine disrupting chemical, has been investigated. • 3 stable byproducts were identified from photolysis and oxidation processes. • 5 transient by-products were concluded from LFP experiments. • The theoretical calculation was performed to confirm the byproducts. • 4-t-BP was degraded with increasing efficiency: 254 nm < H{sub 2}O{sub 2}/313 nm < H{sub 2}O{sub 2}/254 nm.

  17. Effects of the benzoxazolinone BOA, selected degradation products and structure related pesticides on soil organisms.

    Science.gov (United States)

    Coja, Tamara; Idinger, Jacqueline; Blümel, Sylvia

    2006-02-01

    The benzoxazolinone BOA and the degradation products APO, AAPO and HPAA, as well as four structure related compounds to BOA, were tested for their lethal and sublethal effects on the collembola Folsomia candida and on the carabid beetle Poecilus cupreus applying validated standard laboratory methods. According to the results of the recommended risk assessment for plant protection products (EPPO, 2003), BOA and its structure related compounds carbendazim, benoxacor and benazolin (and additionally the formulated product Cresopur) were classified as low risk compounds for both test organisms. Phosalone was of high risk for F. candida. APO, AAPO and HPAA were of medium risk for F. candida, but were rated as low risk compounds for P. cupreus at the tested rates of about 2 mg/kg substrate. However, as the BOA degradation products have been found to occur at field rates below 0.2 mg/kg substrate or are often even not detectable, it is assumed that their potential risk for both non-target soil organisms in the field will be acceptable.

  18. Ruminal degradation kinetics of protein foods by in vitro gas production technique

    Directory of Open Access Journals (Sweden)

    Ivone Yurika Mizubuti

    2014-02-01

    Full Text Available Chemical analysis of carbohydrates and nitrogen fractions, as well as, determination their carbohydrates digestion rates in soyben meal (SM, crambe meal (CM, radish meal (RM, wet brewery residue (WBR and dehydrated silkworm chrysalis (SCD were accomplished. The kinetics parameters of non-fibrous carbohydrates (NFC and B2 fraction were estimated using cumulative gas production technique. Among the foods studied there was considerable variation in chemical composition. The crambe meal was the only food that did not present synchronism between carbohydrate and nitrogen fractions. In this food there was predominance of A+B1 carbohydrates fractions and B1+B2 nitrogen compounds fraction, and for the other predominated B2 carbohydrate fraction and B1+ B2 nitrogen compounds fraction. There were differences among the digestive kinetic parameters for all foods. The greater participation in gas production due to non-fibrous carbohydrates was found in the crambe meal and oilseed radish meal. The fermentation of fibrous carbohydrates provided higher gas volume in the wet brewery residue and in the soybean meal, however, the soybean meal was food with higher total gas volume. Non fibrous carbohydrates degradation rates of wet brewery residue and dehydrated silkworm chrysalis were far below the limits of degradation of this fraction. Due to the parameters obtained by the cumulative gas production, the soybean meal was the best food, however, all others have potential for use in animal nutrition. The cumulative gas production technique allows the estimative of degradation rates and provides further information about the ruminal fermentation kinetics of foods.

  19. Biosurfactant production by Pseudomonas fluorescens growing on molasses and its application in phenol degradation

    Science.gov (United States)

    Suryantia, Venty; Marliyana, Soerya Dewi; Wulandari, Astri

    2015-12-01

    A molasses based medium for the biosurfactant production by Pseudomonas fluorescens was developed, where the effect of pre-treated of molasses and medium composition were evaluated. Biosurfactant production was followed by measuring optical density (OD), surface tension and emulsifying index (E24) over 12 days of fermentation. The optimum condition for the biosurfactant production was obtained when a medium containing of 8 g/L nutrient broth, 5 g/L NaCl, 1 g/L NH4NO3 and 5% v/v pre-treated molasses with centrifugation was used as media with 3 days of fermentation. The biosurfactant was identified as a rhamnolipid type biosurfactant which had critical micelle concentration (CMC) value of 801 mg/L and was able to reduce the surface tension of the water from 80 mN/m to 51 mN/m. The biosurfactants had water in oil (w/o) emulsion type. Biosurfactant was able to emulsify various hydrocarbons, which were able to decrase the interfacial tension about 50-75% when benzyl chloride, anisaldehyde and palm oil were used as immiscible compounds. The biosurfactant exhibited the E24 value of about 50% and the stable emulsion was reached up to 30 days when lubricant was used as an immiscible compound. Up to 68% of phenol was degraded in the presence of biosurfactant within 15 days, whereas only 56% of phenol was degraded in the absence of biosurfactant. Overall, the results exhibited that molasses are recommended for the rhamnolipids production which possessed good surface-active properties and had potential application in the enhancement of phenol degradation.

  20. Photocatalytic and photoelectrocatalytic degradation of the drug omeprazole on nanocrystalline titania films in alkaline media: Effect of applied electrical bias on degradation and transformation products

    Energy Technology Data Exchange (ETDEWEB)

    Tantis, Iosif [Department of Chemical Engineering, University of Patras, Caratheodory 1, University Campus, GR-26504 Patras (Greece); Bousiakou, Leda [Department of Physics and Astronomy, King Saud University, Riyadh (Saudi Arabia); Department of Automation Engineering, Technological Educational Institute of Pireaus, GR-12244 Athens (Greece); Frontistis, Zacharias; Mantzavinos, Dionissios [Department of Chemical Engineering, University of Patras, Caratheodory 1, University Campus, GR-26504 Patras (Greece); Konstantinou, Ioannis; Antonopoulou, Maria [Department of Environmental and Natural Resources Management, University of Patras, GR-30100 Agrinio (Greece); Karikas, George-Albert [Department of Medical Laboratories Technology, Technological Educational Institute of Athens, 12210 Athens (Greece); Lianos, Panagiotis, E-mail: lianos@upatras.gr [Department of Chemical Engineering, University of Patras, Caratheodory 1, University Campus, GR-26504 Patras (Greece); FORTH/ICE-HT, P.O. Box 1414, GR-26504 Patras (Greece)

    2015-08-30

    Highlights: • Photocatalytic and photoelectrocatalytic degradation of the proton pump omeprazole. • Improvement of photocatalysis rate by applying a moderate forward bias. • Highlighting of the advantages of photoelectrocatalysis in a straightforward manner. • HPLC and HR-LC–MS analysis of transformation products. - Abstract: Photocatalytic and photoelectrocatalytic degradation of the drug omeprazole has been studied in the presence of nanocrystalline titania films supported on glass slides or transparent FTO electrodes in alkaline environment. Its photocatalytic degradation rate was assessed by its UV absorbance and by HPLC, while its transformation products were analyzed by HR-LC–MS. Based on UV absorbance, omeprazole can be photocatalytically degraded at an average rate of 6.7 × 10{sup −4} min{sup −1} under low intensity UVA irradiation of 1.5 mW cm{sup −2} in the presence of a nanoparticulate titania film. This corresponds to degradation of 1.4 mg of omeprazole per gram of the photocatalyst per liter of solution per hour. The photodegradation rate can be accelerated in a photoelectrochemical cell by applying a forward bias. In this case, the maximum rate reached under the present conditions was 11.6 × 10{sup −4} min{sup −1} by applying a forward bias of +0.6 V vs. Ag/AgCl. Four major transformation products were successfully identified and their profiles were followed by HR-LC–MS. The major degradation path includes the scission of the sulfoxide bridge into the corresponding pyridine and benzimidazole ring derivates and this is accompanied by the release of sulfate anions in the reaction mixture.

  1. The effect of 4-tert-butylpyridine and Li+ on the thermal degradation of TiO2 - bound ruthenium dye N719

    DEFF Research Database (Denmark)

    Nguyen, Phuong Tuyet; Hansen, Poul Erik; Lund, Torben

    2013-01-01

    Thermal stability experiments were performed at 100 °C of the dye-sensitized solar cell ruthenium dye N719. The experiments were performed as simple test-tube experiments carried out with colloidal solutions of N719-loaded TiO2 particles. The dye degradation was followed by the use of HPLC-couple...

  2. Substitution of common concentrates with by-products modulated ruminal fermentation, nutrient degradation, and microbial community composition in vitro

    National Research Council Canada - National Science Library

    Ertl, P; Knaus, W; Metzler-Zebeli, B U; Klevenhusen, F; Khiaosa-Ard, R; Zebeli, Q

    2015-01-01

    ...) with a mixture consisting solely of by-products from the food industry (BP) at 2 different forage-to-concentrate ratios on ruminal fermentation profile, nutrient degradation, and abundance of rumen microbiota...

  3. MEASUREMENT AND MODELING OF THE TRANSPORT OF ENDOCRINE DISRUPTING DICARBOXIMIDES AND DEGRADATION PRODUCTS FROM THE SOIL TO THE LOWER TROPOSPHERE

    Science.gov (United States)

    This research addresses the environmental fate, transport, exposure and potential risks from dicarboximides, a widely used class of agricultural fungicides. Certain dicarboximide fungicides and degradation products have been found to be anti-androgenic; i. e., exposure to these...

  4. MEASURING AND MODELING THE TRANSPORT OF ENDOCRINE DISRUPTING DICARBOXIMIDES AND DEGRADATION PRODUCTS FROM THE SOIL TO THE LOWER TROPOSPHERE

    Science.gov (United States)

    This research addresses the environmental fate, transport, exposure and potential risks from dicarboximides, a widely used class of agricultural fungicides. Certain dicarboximide fungicides and degradation products have been found to be anti-androgenic; i. e., exposure to these...

  5. Stability-indicating methods for the determination of racecadotril in the presence of its degradation products.

    Science.gov (United States)

    Mohamed, Afaf O; Fouad, Manal M; Hasan, Mona M; Abdel Razeq, Sawsan A; Elsherif, Zeinab A

    2009-12-01

    Three stability-indicating methods were developed for the determination of racecadotril (RCT) in the presence of its alkaline degradation products. The first was an HPLC method in which efficient chromatographic separation was achieved on a C18 analytical column and a mobile phase of acetonitrile-methanol-water-acetic acid (52:28:20:0.1, v/v/v/v). Linearity was obtained in the range of 4-40 microg/mL with mean accuracy of 99.5 +/- 0.88%. The second method was a densitometric evaluation of thin-layer chromatograms of the drug using a mobile phase of isopropanol-ammonia (33%)-n-hexane (9:0.5:20, v/v/v). The chromatograms were scanned at 232 nm, a wavelength at which RCT can be readily separated from its degradation products and determined in the range of 2-20 microg per spot with mean accuracy of 99.5 +/- 0.56%. The third method is based on the use of first-derivative spectrophotometry (D1) at 240 nm, and the drug was determined in the range of 5-40 microg/mL with mean accuracy of 99.2 +/- 1.02%. The three methods provided satisfactory recovery of the intact drug (100.8 +/- 0.82, 100.4 +/- 0.55, and 99.9 +/- 0.72%, respectively) in the presence of up to 90% of its degradation products. Determination was also successful when analyzing RCT in a formulation in the form of acetorphan packets. Results were statistically analyzed and found to be in accordance with those given by a reported method.

  6. Graphene-modified nickel foam electrode for cathodic degradation of nitrofuranzone: Kinetics, transformation products and toxicity

    Directory of Open Access Journals (Sweden)

    Ya Ma

    2017-12-01

    Full Text Available Simple, efficient, and durable electrodes are highly demanded for practical electro­chemical process. In this study, a reduced graphene oxide modified nickel foam electrode (GR‑Ni foam was facilely prepared via one-step cyclic voltammetry electrodeposition of gra­phene oxide suspension onto the Ni foam. The electrochemical degradation of nitrofuran­zone (NFZ, a kind of typical antibiotics was studied on the GR-Ni foam cathode. The cyclic voltammetry and electrochemical impedance spectra analysis confirmed that presence of GR loading accelerated the electron transfer from the cathode surface to NFZ. With the applied cathode potential of −1.25 V (vs. Ag/AgCl, the removal efficiency of NFZ (C0 = 20 mg L−1 at the GR-Ni foam electrode reached up to 99 % within 30 min, showing a higher reaction rate constant (0.1297 min−1 than 0.0870 min−1 at the Pd-Ni foam and 0.0186 min−1 at the Ni foam electrode. It was also found that the pH, dissolved oxygen and NFZ initial concentration have slight effect on NFZ degradation at the GR-Ni foam electrode. The reactions first occurred at nitro groups (-NO2, unsaturated C=N bonds and N-N bonds to generate furan ring-containing products, and then these products were transformed into linear diamine products. The direct reduction by electrons was mainly responsible for NFZ reduction at the GR-Ni foam electrode. Even after 18 cycles, the removal efficiency of NFZ still reached up to 98 % within 1 h. In addition, the cathodic degradation process could eliminate the antibacterial activity of NFZ. The GR-Ni foam electrode would have a great potential in electrochemical process for treating wastewater containing furan antibiotics.

  7. Degradation kinetics of organic chloramines and formation of disinfection by-products during chlorination of creatinine.

    Science.gov (United States)

    Zhang, Tianyang; Xu, Bin; Wang, Anqi; Cui, Changzheng

    2018-03-01

    Organic chloramines can interfere with the measurement of effective combined chlorine in chlorinated water and are potential intermediate products of highly toxic disinfection by-products (DBPs). In order to know more about the degradation and transformation of organic chloramines, a typical organic chloramine precursor creatinine was selected for investigation and a corresponding individual organic chloramine chlorocreatinine was prepared in this study. The preparation condition of chlorocreatinine by chlorination was established as chlorine/creatinine = 1 M/M, reaction time = 2 h and pH = 7.0. Then the degradation kinetics of chlorocreatinine during further chlorination was studied, and a second-order rate constant of 1.16 (±0.14) M-1 s-1 was obtained at pH 7.0. Solution pH significantly influenced the degradation rate, and the elementary rate constants of chlorocreatinine with HOCl+H+, HOCl, OCl- and chlorocreatinine- with OCl- were calculated as 2.43 (±1.55) × 104 M-2 s-1, 1.05 (±0.09) M-1 s-1, 2.86 (±0.30) M-1 s-1 and 3.09 (±0.24) M-1 s-1, respectively. Besides, it was found that chlorocreatinine could be further converted into several C-DBPs (chloroform and trichloroacetone) and N-DBPs (dichloroacetonitrile (DCAN) and trichloronitromethane (TCNM)) during chlorination. The total yield of DBPs increased obviously with increasing pH, especially for TCNM. In addition, the presence of humic acid in creatinine solution could increase the formation of DCAN obviously during chlorination. Based on the UPLC-Q-TOF-MS analysis, the conversion pathways of chlorocreatinine were proposed. Several kinds of intermediate products were also identified as organic chloramines and some of them could even exist stably during the further chlorination. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Characterization of intermediate products of solar photocatalytic degradation of ranitidine at pilot-scale.

    Science.gov (United States)

    Radjenović, Jelena; Sirtori, Carla; Petrović, Mira; Barceló, Damià; Malato, Sixto

    2010-04-01

    In the present study the mechanisms of solar photodegradation of H(2)-receptor antagonist ranitidine (RNTD) were studied in a well-defined system of a pilot plant scale Compound Parabolic Collector (CPC) reactor. Two types of heterogeneous photocatalytic experiments were performed: catalysed by titanium-dioxide (TiO(2)) semiconductor and by Fenton reagent (Fe(2+)/H(2)O(2)), each one with distilled water and synthetic wastewater effluent matrix. Complete disappearance of the parent compounds and discreet mineralization were attained in all experiments. Furthermore, kinetic parameters, main intermediate products, release of heteroatoms and formation of carboxylic acids are discussed. The main intermediate products of photocatalytic degradation of RNTD have been structurally elucidated by tandem mass spectrometry (MS(2)) experiments performed at quadrupole-time of flight (QqToF) mass analyzer coupled to ultra-performance liquid chromatograph (UPLC). RNTD displayed high reactivity towards OH radicals, although a product of conduction band electrons reduction was also present in the experiment with TiO(2). In the absence of standards, quantification of intermediates was not possible and only qualitative profiles of their evolution could be determined. The proposed TiO(2) and photo-Fenton degradation routes of RNTD are reported for the first time. (c) 2010 Elsevier Ltd. All rights reserved.

  9. Analysis of nisin A, nisin Z and their degradation products by LCMS/MS.

    Science.gov (United States)

    Schneider, N; Werkmeister, K; Pischetsrieder, M

    2011-07-15

    The peptides nisin A and nisin Z belong to type-A lantibiotics applied as preservatives in cheese production. The present study optimised and validated a liquid chromatography-tandem mass spectrometry (LCMS/MS) method for the analysis of nisin A in cheese. Since nisin A was not detectable in nisin-containing commercial cheese samples, an additional LCMS/MS method for the quantification of nisin Z was developed and validated. Quantification was performed by external calibration and standard addition. The latter method provided a non-significantly higher recovery rate for the tested cheese matrix. During the production of processed cheese, nisin A and nisin Z undergo significant degradation. Six degradation products of nisin A or nisin Z, respectively, were detected and assigned to nisin A/Z+H(2)O, nisin A/Z(1-32), and nisin A/Z(1-32)+H(2)O. In two out of eight commercial processed cheese samples, 1.6, resp. 1.7mg nisin Z/kg cheese was measured, whereas nisin A was not detectable in any of the samples. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Effects of the benzoxazoid DIMBOA, selected degradation products, and structure-related pesticides on soil organisms.

    Science.gov (United States)

    Idinger, Jacqueline; Coja, Tamara; Blümel, Sylvia

    2006-09-01

    Both lethal and sublethal effects of the benzoxazoid 2,4-dihydroxy-7-methoxy-(2H)-1,4-benzoxazin-3(4H)-one (DIMBOA), the degradation products 6-methoxy-benzoxazolin-2(3H)-one (MBOA), 2-amino-7-methoxy-(3H)-phenoxazin-3-one (AMPO), and 2-acetylamino-7-methoxy-3(H)-phenoxazin-3-one (AAMPO) and the structure-related compounds 2-methoxy-N-(2-oxo-1,3-oxazolidin-3yl)acet-2'=6'-xylidide (oxadixyl), and O,O-diethyl S-[6-chloro-2-oxobenzoxazolin-3-yl)methyl]phosphorodithioate (phosalone) on the collembola Folsomia candida and on the carabid beetle Poecilus cupreus (except phosalone) were determined. Validated laboratory standard methods including reference and control treatments were applied in compliance with prescribed validity criteria. A risk assessment according to the EPPO risk assessment scheme for plant protection products (2003) was carried out. DIMBOA, MBOA, AMPO, AAMPO, and oxadixyl were classified as low-risk compounds for both test organisms. The reference compounds methyl-m-hydroxy-carbanilate-methyl-carbanilate (phenmedipham) and O,O-dimethyl S-[2-(methylamino)-2-oxoethyl]phosphoro-dithioate (dimethoate) were of low and medium risk respectively, to F. candida, but final assessment of the risk to P. cupreus requires further testing. Phosalone was of high risk to F. candida. The results obtained suggest that neither DIMBOA nor the tested degradation products pose a risk to either nontarget soil organism in the field.

  11. Performance Degradation of Thermal Parameters during Cycle Ageing of High Energy Density Ni-Mn-Co based Lithium-Ion Battery Cells

    DEFF Research Database (Denmark)

    Stanciu, Tiberiu; Stroe, Daniel Loan; Swierczynski, Maciej Jozef

    2016-01-01

    The accelerated demand for electrifying the transportation sector, coupled with the continuous improvement of rechargeable batteries’ characteristics, have made modern high-energy Lithium-ion (Li-ion) batteries the standard choice for hybrid and electric vehicles (EVs). Consequently, Li......-ion batteries’ electrochemical and thermal characteristics are very important topics, putting them at the forefront of the research. Along with the electrical performance of Li-ion battery cells, their thermal behavior needs to be accurately predicted during operation and over the lifespan of the application...... as well, since the thermal management of the battery is crucial for the safety of the EV driver. Moreover, the thermal management system can significantly lower the degradation rate of the battery pack and thus reduce costs. In this paper, the thermal characterization of a commercially available Nickel...

  12. Speciation of methylmercury in market seafood by thermal degradation, amalgamation and atomic absorption spectroscopy.

    Science.gov (United States)

    Ruiz-de-Cenzano, Manuela; Rochina-Marco, Arancha; Cervera, M Luisa; de la Guardia, Miguel

    2014-09-01

    Sample thermal decomposition followed by mercury amalgamation and atomic absorption has been employed for the determination of methylmercury (MeHg) in fish. The method involves HBr leaching of MeHg, extraction into toluene, and back-extraction into an aqueous l-cysteine solution. Preliminary studies were focused on the extraction efficiency, losses, contaminations, and species interconversion prevention. The limit of detection was 0.018µgg(-1) (dry weight). The intraday precision for three replicate analysis at a concentration of 4.2µgg(-1) (dry weight) was 3.5 percent, similar to the interday precision according to analysis of variance (ANOVA). The accuracy was guaranteed by the use of fortified samples involving 83-105 percent recoveries, and certified reference materials TORT-2 (lobster hepatopancreas) and DORM-3 (dogfish liver), providing 107 and 98 percent recovery of certified values. The greenness of the method was also evaluated with the analytical eco-scale being obtained a final score of 73 points which means an acceptable green analysis. The method was applied to fifty-seven market samples of different fish acquired from local markets in several sampling campaigns. The content of MeHg found varied between 0.0311 and 1.24µgg(-1) (wet weight), with values that involve 33-129 percent of the total mercury content. Some considerations about food safety were also done taking into account data about Spanish fish consume and Tolerable Weekly Intake (TWI) established for MeHg. Copyright © 2014 Elsevier Inc. All rights reserved.

  13. Hydrogenated liquids and hydrogen production by non-thermal plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Arabi, K.; Aubry, O.; Khacef, A.; Cormier, J.M. [Orleans Univ., Orleans Cedex (France). Centre national de la recherche scientifique, Polytech d' Orleans, Group for Research and Studies on Mediators of Inflamation

    2010-07-01

    In recent years, hydrogen (H{sub 2}) has been considered as a fuel for electricity generation and transportation purposes. H{sub 2} is a renewable energy source that does not contribute to the greenhouse effect. This paper reported on a comparative study of syngas production from alcohol, with particular reference to the plasma steam-reforming of ethanol, methanol, ammonia and vegetable oil. The H{sub 2} yields and energetic cost in function of hydrogen sources were presented. The non thermal plasma used in this study was a laboratory scale experimental device static discharge. An arc formed between two electrodes made of graphite. The efficiency of the process was determined through chemical diagnostics. Gas chromatography and Fourier transform infrared (FTIR) techniques were used to determine concentrations of H{sub 2}, carbon monoxide, carbon dioxide and carbon as functions of flow and inlet liquid mixture concentration parameters. This paper also presented the values of H{sub 2}/CO ratio and the composition of synthesis gas according to various operating conditions. 18 refs., 2 tabs., 8 figs.

  14. Thermally assisted sensor for conformity assessment of biodiesel production

    Science.gov (United States)

    Kawano, M. S.; Kamikawachi, R. C.; Fabris, J. L.; Muller, M.

    2015-02-01

    Although biodiesel can be intentionally tampered with, impairing its quality, ineffective production processes may also result in a nonconforming final fuel. For an incomplete transesterification reaction, traces of alcohol (ethanol or methanol) or remaining raw material (vegetable oil or animal fats) may be harmful to consumers, the environment or to engines. Traditional methods for biodiesel assessment are complex, time consuming and expensive, leading to the need for the development of new and more versatile processes for quality control. This work describes a refractometric fibre optic based sensor that is thermally assisted, developed to quantify the remaining methanol or vegetable oil in biodiesel blends. The sensing relies on a long period grating to configure an in-fibre interferometer. A complete analytical routine is demonstrated for the sensor allowing the evaluation of the biodiesel blends without segregation of the components. The results show the sensor can determine the presence of oil or methanol in biodiesel with a concentration ranging from 0% to 10% v/v. The sensor presented a resolution and standard combined uncertainty of 0.013% v/v and 0.62% v/v for biodiesel-oil samples, and 0.007% v/v and 0.22% v/v for biodiesel-methanol samples, respectively.

  15. Leaching of azoxystrobin and its degradation product R234886 from Danish agricultural field sites

    DEFF Research Database (Denmark)

    Jørgensen, Lisbeth Flindt; Kjær, Jeanne; Olsen, Preben

    2012-01-01

    The objective was to estimate leaching of the fungicide azoxystrobin (methyl (αE)-2-[[6-(2-cyanophenoxy)-4-pyrimidinyl]oxy]-α-(methoxymethylene)benzene-acetate) and one of its primary degradation products R234886 ([(E)-2-(2-[6-cyanophenoxy)-pyrimidin-4-yloxyl]-phenyl-3-methoxyacrylic acid], major...... through loamy soils. While azoxystrobin was generally only detected during the first couple of months following application, R234886 leached for a longer period of time and at higher concentrations (up to 2.1 μg L−1). Azoxystrobin is classified as very toxic to aquatic organisms and R234886 as very...

  16. Identification of degradation products of ionic liquids in an ultrasound assisted zero-valent iron activated carbon micro-electrolysis system and their degradation mechanism.

    Science.gov (United States)

    Zhou, Haimei; Lv, Ping; Shen, Yuanyuan; Wang, Jianji; Fan, Jing

    2013-06-15

    Ionic liquids (ILs) have potential applications in many areas of chemical industry because of their unique properties. However, it has been shown that the ILs commonly used to date are toxic and not biodegradable in nature, thus development of efficient chemical methods for the degradation of ILs is imperative. In this work, degradation of imidazolium, piperidinium, pyrrolidinium and morpholinium based ILs in an ultrasound and zero-valent iron activated carbon (ZVI/AC) micro-electrolysis system was investigated, and some intermediates generated during the degradation were identified. It was found that more than 90% of 1-alkyl-3-methylimidazolium bromide ([Cnmim]Br, n = 2, 4, 6, 8, 10) could be degraded within 110 min, and three intermediates 1-alkyl-3-methyl-2,4,5-trioxoimidazolidine, 1-alkyl-3-methylurea and N-alkylformamide were detected. On the other hand, 1-butyl-1-methylpiperidinium bromide ([C4mpip]Br), 1-butyl-1-methylpyrrolidinium bromide ([C4mpyr]Br) and N-butyl-N-methylmorpholinium bromide ([C4mmor]Br) were also effectively degraded through the sequential oxidization into hydroxyl, carbonyl and carboxyl groups in different positions of the butyl side chain, and then the N-butyl side chain was broken to form the final products of N-methylpiperidinium, N-methylpyrrolidinium and N-methylmorpholinium, respectively. Based on these intermediate products, degradation pathways of these ILs were suggested. These findings may provide fundamental information on the assessment of the factors related to the environmental fate and environmental behavior of these commonly used ILs. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Degradation of 2,4-dichlorophenoxyacetic acid by a halotolerant strain of Penicillium chrysogenum: antibiotic production.

    Science.gov (United States)

    Ferreira-Guedes, Sumaya; Mendes, Benilde; Leitão, Ana Lúcia

    2012-01-01

    The extensive use of pesticides in agriculture has prompted intensive research on chemical and biological methods in order to protect contamination of water and soil resources. In this paper the degradation of the pesticide 2,4-dichlorophenoxyacetic acid by a Penicillium chrysogenum strain previously isolated from a salt mine was studied in batch cultures. Co-degradation of 2,4-dichlorophenoxyacetic acid with additives such as sugar and intermediates of pesticide metabolism was also investigated. Penicillium chrysogenum in solid medium was able to grow at concentrations up to 1000 mg/L of 2,4-dichlorophenoxyacetic acid (2,4-D) with sucrose. Meanwhile, supplementation of the solid medium with glucose and lactose led to fungal growth at concentrations up to 500 mg/L of herbicide. Batch cultures of 2,4-D at 100 mg/L were developed under aerobic conditions with the addition of glucose, lactose and sucrose, showing sucrose as the best additional carbon source. The 2,4-D removal was quantified by liquid chromatography. The fungus was able to use 2,4-D as the sole carbon and energy source under 0%, 2% and 5.9% NaCl. The greatest 2,4-D degradation efficiency was found using alpha-ketoglutarate and ascorbic acid as co-substrates under 2% NaCl at pH 7. Penicillin production was evaluated in submerged cultures by bioassay, and higher amounts of beta-lactam antibiotic were produced when the herbicide was alone. Taking into account the ability of P. chrysogenum CLONA2 to degrade aromatic compounds, this strain could be an interesting tool for 2,4-D herbicide remediation in saline environments.

  18. Degradation of fluoroquinolone antibiotics by ferrate(VI): Effects of water constituents and oxidized products.

    Science.gov (United States)

    Feng, Mingbao; Wang, Xinghao; Chen, Jing; Qu, Ruijuan; Sui, Yunxia; Cizmas, Leslie; Wang, Zunyao; Sharma, Virender K

    2016-10-15

    The degradation of five fluoroquinolone (FQ) antibiotics (flumequine (FLU), enrofloxacin (ENR), norfloxacin (NOR), ofloxacin (OFL) and marbofloxacin (MAR)) by ferrate(VI) (Fe(VI)O4(2-), Fe(VI)) was examined to demonstrate the potential of this iron-based chemical oxidant to treat antibiotics in water. Experiments were conducted at different molar ratios of Fe(VI) to FQs at pH 7.0. All FQs, except FLU, were degraded within 2 min at [Fe(VI)]:[FQ] ≤ 20.0. Multiple additions of Fe(VI) improved the degradation efficiency, and provided greater degradation than a single addition of Fe(VI). The effects of anions, cations, and humic acid (HA), usually present in source waters and wastewaters, on the removal of FLU were investigated. Anions (Cl(-), SO4(2-), NO3(-), and HCO3(-)) and monovalent cations (Na(+) and K(+)) had no influence on the removal of FLU. However, multivalent cations (Ca(2+), Mg(2+), Cu(2+), and Fe(3+)) in water decreased the efficiency of FLU removal by Fe(VI). An increase in the ionic strength of the solution, and the presence of HA in the water, also decreased the percentage of FLU removed by Fe(VI). Experiments on the removal of selected FQs, present as co-existing antibiotics in pure water, river water, synthetic water and wastewater, were also conducted to demonstrate the practical application of Fe(VI) to remove the antibiotics during water treatment. The seventeen oxidized products (OPs) of FLU were identified using solid phase extraction-liquid chromatography-high-resolution mass spectrometry. The reaction pathways are proposed, and are theoretically confirmed by molecular orbital calculations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Can degradation products released from dental implants affect peri-implant tissues?

    Science.gov (United States)

    Noronha Oliveira, M; Schunemann, W V H; Mathew, M T; Henriques, B; Magini, R S; Teughels, W; Souza, J C M

    2017-08-02

    This study aimed to assess the literature available on the effects, on peri-implant tissues, of degradation products released from dental implants as a consequence of therapeutic treatment for peri-implantitis and/or of wear-corrosion of titanium. A literature review of the PubMed medline database was performed up to December 31, 2016. The following search terms were used: "titanium wear and dental implant"; "titanium corrosion and dental implant"; "bio-tribocorrosion"; "peri-implantitis"; "treatment of peri-implantitis"; "titanium particles release and dental implant"; and "titanium ion release and dental implant". The keywords were applied to the database in different combinations without limits of time period or type of work. In addition, the reference lists of relevant articles were searched for further studies. Seventy-nine relevant scientific articles on the topic were retrieved. The results showed that pro-inflammatory cytokines, infiltration of inflammatory response cells and activation of the osteoclasts activity are stimulated in peri-implant tissues in the presence of metal particles and ions. Moreover, degenerative changes were reported in macrophages and neutrophils that phagocytosed titanium microparticles, and mutations occurred in human cells cultured in medium containing titanium-based nanoparticles. Debris released from the degradation of dental implants has cytotoxic and genotoxic potential for peri-implant tissues. Thus, the amount and physicochemical properties of the degradation products determine the magnitude of the detrimental effect on peri-implant tissues. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. Investigation of forced and total degradation products of amlodipine besylate by liquid chromatography and liquid chromatography-mass spectrometry

    Directory of Open Access Journals (Sweden)

    Stoiljković Zora Ž.

    2014-01-01

    Full Text Available An isocratic, reversed-phase liquid chromatographic method was applied for the investigation of the degradation products of amlodipine besylate under the stressed conditions in solution. Amlodipine besylate stock solutions were subjected to acid and alkali hydrolysis, chemical oxidation and photodegradation as well as to the electrochemical degradation by cyclic voltammetry in 0.05 mol/L NaHCO3 on gold electrode. The total degradation of amlodipine besylate was achieved in 5 mol/L NaOH at 80°C for 6 h and the compound with molecular formula C15H16NOCl was identified as a main degradation product. Under acidic (5 mol/L HCl at 80°C for 6 h stress conditions 75.2% of amlodipine besylate degradation was recorded. Oxidative degradation in the solution of 3% H2O2-methanol 80:20 at 80°C for 6 h showed that amlodipine besylate degraded to 80.1%. After 14 days of expose in photostability chamber amlodipine besylate solution showed degradation of 32.2%. In electrochemical degradation after 9 hours of cyclization the beginning of amlodipine oxidation was shifted for 200 mV to more negative potentials, with the degradation of 66.5%. Mass spectrometry analysis confirmed the presence of dehydro amlodipine derivate with molecular formula C20H23N2O5Cl in oxidative and acidic conditions while in electrochemical degradation was detected in traces. [Projekat Ministarsva nauke Republike Srbije, br. 172013

  1. Hydroxyl radical-induced degradation of fenuron in pulse and gamma radiolysis: kinetics and product analysis.

    Science.gov (United States)

    Kovács, Krisztina; Mile, Viktoria; Csay, Tamás; Takács, Erzsébet; Wojnárovits, László

    2014-11-01

    Radiolytic reactions of phenylureas were studied in detail with fenuron model compound in dilute aqueous solutions using pulse radiolysis for detection of the intermediates, gamma radiolysis with UV-Vis and HPLC-MS techniques for analysis of the final products. The kinetics of oxidation was followed by COD, TOC and toxicity measurements. During radiolysis of aerated solutions hydroxyl radical ((•)OH), eaq (-), H(•) and O2 (•-)/HO2 (•) reactive intermediates are produced, the degradation of solute takes place practically entirely through (•)OH reactions. Therefore, the product distribution is similar to the distributions reported in other advanced oxidation processes with (•)OH as main reactant. (•)OH mainly reacts with the aromatic ring, forming cyclohexadienyl radical as an intermediate. This radical in pulse radiolysis has a wide absorption band in the 310-390 nm wavelength range with a maximum at 350 nm. Cyclohexadienyl radical reacts with dissolved O2 with a rate coefficient of ∼ 4 × 10(8) mol(-1) dm(3) s(-1) forming peroxy radical. The latter may eliminate HO2 (•) giving phenols or undergoes fragmentation. The one-electron oxidant (•)OH on average induces more than two-electron oxidations. The toxicity first increases with absorbed dose, then decreases. This increase is partly due to phenols formed during the first degradation period.

  2. Low molecular weight products from the aqueous alkaline degradation of cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Molton, P. M.; Miller, R. K.; Donovan, J. M.; Demmitt, T. F.

    1977-11-01

    Low molecular weight products from the degradation of pure cellulose in 0.6 to 1.3 N alkali at 300/sup 0/C were identified by gas chromatography/mass spectrometry (GC/MS). Both the aqueous residual phase and the floating oil product phase were examined, and found to contain essentially the same compounds. Derivatization by trifluoroacetic anhydride was used as an ancillary method to aid identification of these compounds, which consisted primarily of unsaturated aliphatic and alicyclic hydrocarbons, aldehydes, ketones, alcohols, and furans. Many isomers were present. Specific compounds identified with a high level of confidence were cyclopentanone, cyclohexanone, phenol, cresols, 2-ethylcyclopentanone, 2- or 3-methylcyclopentanone, 2,5-dimethyl-2-cylopentenone, acrolein, 2,5-dimethyl-2,4-hexadiene, and octene. Compounds identified with a lower level of confidence include 2,4-dimethylfuran, 2,5-diethylfuran, ethylmethylfuran, 4-octyne, and decyne. The formation of these compounds from cellulose under alkaline conditions demonstrates not only the degradation of cellulose, but the resynthesis of molecules with carbon chain lengths greater than 6 atoms (the chain length of glucose). Such resynthesis must occur to a great extent in the formation of insoluble high molecular weight oils from cellulose by heating in aqueous alkali.

  3. Pesticides and pesticide degradation products in stormwater runoff: Sacramento River Basin, California

    Science.gov (United States)

    Domagalski, J.

    1996-01-01

    Pesticides in stormwater runoff, within the Sacramento River Basin, California, were assessed during a storm that occurred in January 1994. Two organophosphate insecticides (diazinon and methidathion), two carbamate pesticides (molinate and carbofuran), and one triazine herbicide (simazine) were detected. Organophosphate pesticide concentrations increased with the rising stage of the hydrographs; peak concentrations were measured near peak discharge. Diazinon oxon, a toxic degradation product of diazinon, made up approximately 1 to 3 percent of the diazinon load. The Feather River was the principal source of organophosphate pesticides to the Sacramento River during this storm. The concentrations of molinate and carbofuran, pesticides applied to rice fields during May and June, were relatively constant during and after the storm. Their presence in surface water was attributed to the flooding and subsequent drainage, as a management practice to degrade rice stubble prior to the next planting. A photodegradation product of molinate, 4-keto molinate, was in all samples where molinate was detected and made up approximately 50 percent of the total molinate load. Simazine, a herbicide used in orchards and to control weeds along the roadways, was detected in the storm runoff, but it was not possible to differentiate the two sources of that pesticide to the Sacramento River.

  4. Photocatalytic degradation of methyl orange using ZnO nanopowders synthesized via thermal decomposition of oxalate precursor method

    Science.gov (United States)

    Kaur, Japinder; Bansal, S.; Singhal, Sonal

    2013-05-01

    ZnO nanoparticles were synthesized by thermal decomposition of oxalate precursor method. The nanopowders were characterized using powder X-ray diffraction technique and scanning electron microscopy and sample was found to have hexagonal wurtzite structure of ZnO. Average crystallite size of ZnO was found to be ∼27 nm. The photocatalytic activity of ZnO was evaluated by using methyl orange (MO) as probe molecule. It was inferred from control experiments that presence of both ZnO and UV light is necessary for photodegradation. From photocatalytic experiment it was observed that MO is completely degraded in 80 min when the amount of catalyst is 1 g/L and initial concentration of MO is 0.03 mM. The effect of dye concentration, catalyst loading and solution pH on photodegradation rate was also investigated. It was found that optimal conditions for photodegradation of MO are 1 g/L catalyst at a solution pH 9. Photodegradation of MO was found to follow pseudo-first order kinetics. Langmuir-Hinshelwood model was also used to describe the photodegradation process.

  5. Real-time mass spectroscopy analysis of Li-ion battery electrolyte degradation under abusive thermal conditions

    Science.gov (United States)

    Gaulupeau, B.; Delobel, B.; Cahen, S.; Fontana, S.; Hérold, C.

    2017-02-01

    The lithium-ion batteries are widely used in rechargeable electronic devices. The current challenges are to improve the capacity and safety of these systems in view of their development to a larger scale, such as for their application in electric and hybrid vehicles. Lithium-ion batteries use organic solvents because of the wide operating voltage. The corresponding electrolytes are usually based on combinations of linear, cyclic alkyl carbonates and a lithium salt such as LiPF6. It has been reported that in abusive thermal conditions, a catalytic effect of the cathode materials lead to the formation fluoro-organics compounds. In order to understand the degradation phenomenon, the study at 240 °C of the interaction between positive electrode materials (LiCoO2, LiNi1/3Mn1/3Co1/3O2, LiMn2O4 and LiFePO4) and electrolyte in dry and wet conditions has been realized by an original method which consists in analyzing by mass spectrometry in real time the volatile molecules produced. The evolution of specific gases channels coupled to the NMR reveal the formation of rarely discussed species such as 2-fluoroethanol and 1,4-dioxane. Furthermore, it appears that the presence of water or other protic impurities greatly influence their formation.

  6. Production and Characterization of Polymeric Lignin Degradation Intermediates from Two Different Streptomyces spp.

    Science.gov (United States)

    Borgmeyer, J R; Crawford, D L

    1985-02-01

    Previous investigations have identified a quantitatively major intermediate of lignin degradation by Streptomyces viridosporus. The intermediate, a modified lignin polymer, acid-precipitable polymeric lignin (APPL), is released as a water-soluble catabolite and has been recovered in amounts equivalent to 30% of the lignin originally present in a corn stover lignocellulose substrate after degradation by this actinomycete. In the present work, APPLs were collected at various time intervals from cultures of two highly ligninolytic Streptomyces sp. strains, S. viridosporus T7A and S. badius 252, growing on corn stover lignocellulose. APPL production was measured over time, and the chemistry of APPLs produced by each organism after different time intervals was compared. Chemical characterizations included assays for lignin, carbohydrate, and ash contents, molecular weight distributions by gel permeation chromatography, and chemical degradation analyses by permanganate oxidation, acidolysis, and alkaline ester hydrolysis. Differences between the organisms were observed in the cultural conditions required for APPL production and in the time courses of APPL accumulation. S. viridosporus produced APPL in solid-state fermentation over a 6- to 8-week incubation period, whereas S. badius produced as much or more APPL, but only in liquid culture and over a 7- to 8-day incubation period. The chemistry of the APPLs produced also differed. S. viridosporus APPL was more lignin-like than that of S. badius and was slowly modified further over time, although no change in molecular weight distribution over time was observed. In contrast, S. badius APPL was less lignin-like and increased substantially in average molecular weight over time. Results indicated that differing mechanisms of lignin metabolism may exist in these two Streptomyces sp. strains. S. viridosporus APPL probably originates from the heart of the lignin and is released largely as the result of beta-ether cleavage and

  7. Mecanismos de degradação e estabilização térmica do PVC: a review Mechanisms of PVC thermal degradation and stabilization

    Directory of Open Access Journals (Sweden)

    Antonio Rodolfo Jr.

    2007-09-01

    Full Text Available Este artigo apresenta uma revisão sobre o tema degradação térmica e estabilização do PVC. Os principais mecanismos de degradação desta resina são apresentados e correlacionados com os defeitos estruturais presentes no polímero, bem como os princípios de estabilização.This paper presents a review of PVC thermal degradation and stabilization. The main degradation mechanisms for this resin are shown and correlated to structural defects present in the polymer, as well the stabilization principles

  8. COMPARATIVE KINETICS STUDY OF THE THERMAL AND THERMO-OXIDATIVE DEGRADATION OF A POLYSTYRENE-CLAY NANOCOMPOZITE BY TGA AND DSC

    Directory of Open Access Journals (Sweden)

    Ion Dranca

    2010-12-01

    Full Text Available The methods of thermogravimetry (TGA and differential scanning calorimetry (DSC have been used to study the thermal and thermo-oxidative degradation of polystyrene (PS and a PS-clay nanocomposite. An advanced isoconversional method has been applied for kinertic analysis. Introduction of the clay phase increasers the activation energy and affects the total heat of degradation, which suggests a change in the reaction mechanism. The obtained kinetic data permit a comparative assessment of the fire resistance of the studied materials

  9. Development and validation of a stability indicating method for S-carboxymethyl-L-cysteine and related degradation products in oral syrup formulation.

    Science.gov (United States)

    Fanigliulo, Ameriga; De Filippis, Piero; Curcuruto, Ornella; Repeto, Paolo; Roveda, Davide; Hartenstein, Matthew; Adams, Erwin; Cabooter, Deirdre

    2015-11-10

    A stability-indicating method for the determination of S-carboxymethyl-L-cysteine and related degradation impurities in Exputex® 250mg/5mL syrup was developed in anion-exchange liquid chromatography mode. A forced degradation study supported the method development to ensure stability indicating conditions. Aqueous solutions of the active pharmaceutical ingredient and syrup samples at different pH-values were stress-tested in different thermal, light exposure and headspace conditions. One degradation product was detected in thermal stress studies at 60°C and 80°C in the pH range 5.0-7.0 and was identified by mass spectrometry as 5-oxo-thiomorpholine-3-carboxylic acid (lactam of carbocysteine). A second degradation product was only generated in moderately strong oxidizing conditions (0.5% H2O2 aqueous solution) and was identified as S-carboxymethyl-L-cysteine-(R/S)-sulphoxide (carbocysteine sulphoxide). The method was developed on a Zorbax SAX column, in isocratic mode. The mobile phase consisted of 200mM phosphate solution at pH 4.0 and acetonitrile (50:50 v/v) and UV detection was performed at a wavelength of 205nm. The method was linear for carbocysteine (R>0.9982) over a concentration range of 2.5-50μg/mL and 0.4-0.6mg/mL. Linearity for the impurities was shown from the LOQ to 50μg/mL. Specificity was verified and accuracy demonstrated for the active ingredient and its degradation products in syrup samples at 3 levels around their respective specification limits. Repeatability, intermediate precision and inter-laboratory reproducibility were assessed on three commercial batches, analyzed in triplicate by two operators at both the transferring and the receiving site and demonstrated a successful method transfer to the manufacturing quality control laboratory. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Use of LC-MS/TOF, LC-MS(n), NMR and LC-NMR in characterization of stress degradation products: Application to cilazapril.

    Science.gov (United States)

    Narayanam, Mallikarjun; Sahu, Archana; Singh, Saranjit

    2015-01-01

    Forced degradation studies on cilazapril were carried out according to ICH and WHO guidelines. Significant degradation of the drug was observed in acid and base conditions, resulting primarily in cilazaprilat. In neutral condition, five degradation products were formed, while under oxidative condition, two degradation products were generated. In total, seven degradation products were formed, which were separated on an Inertsil C-18 column using a stability-indicating HPLC method. Structure elucidation of the degradation products was done by using sophisticated and hyphenated tools like, LC-MS/TOF, LC-MS(n), on-line H/D exchange, LC-NMR and NMR. Initially, comprehensive mass fragmentation pathway of the drug was laid down. Critical comparison of mass fragmentation pathways of the drug and its hydrolytic degradation products allowed structure characterization of the latter. 1D and 2D proton LC-NMR studies further confirmed the proposed structures of hydrolytic degradation products. The oxidative degradation products could not be characterized using LC-MS and LC-NMR tools. Hence, these degradation products were isolated using preparative HPLC and extensive 1D ((1)H, (13)C, DEPT) and 2D (COSY, TOCSY, HETCOR and HMBC) NMR studies were performed to ascertain their structures. Finally, degradation pathways and mechanisms of degradation of the drug were outlined. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Precipitation of organic arsenic compounds and their degradation products during struvite formation

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jin-Biao; Yuan, Shoujun [School of Civil Engineering, Hefei University of Technology, Hefei 230009 (China); Institute of Water Treatment and Wastes Reutilization, Hefei University of Technology, Hefei 230009 (China); Wang, Wei, E-mail: dwhit@126.com [School of Civil Engineering, Hefei University of Technology, Hefei 230009 (China); Institute of Water Treatment and Wastes Reutilization, Hefei University of Technology, Hefei 230009 (China); Hu, Zhen-Hu, E-mail: zhhu@hfut.edu.cn [School of Civil Engineering, Hefei University of Technology, Hefei 230009 (China); Institute of Water Treatment and Wastes Reutilization, Hefei University of Technology, Hefei 230009 (China); Yu, Han-Qing [Department of Chemistry, University of Science & Technology of China, Hefei 230026 (China)

    2016-11-05

    Highlights: • Organic and inorganic arsenic compounds precipitated during struvite formation. • Precipitation of organic arsenic compounds in struvite decreased with increasing pH. • Arsenate easily precipitate in struvite as compared to organic arsenic compounds. • Arsenic compounds in solution affected the shape of struvite crystallization products. - Abstract: Roxarsone (ROX) and arsanilic acid (ASA) have been extensively used as organoarsenic animal feed additives. Organic arsenic compounds and their degradation products, arsenate (As(V)) and arsenite (As(III)), exist in the effluent from anaerobic reactors treating animal manure contaminated by ROX or ASA with ammonium (NH{sub 4}{sup +}-N) and phosphate (PO{sub 4}{sup 3−}-P) together. Therefore, arsenic species in the effluent might be involved in the struvite formation process. In this study, the involvement of organic arsenic compounds and their degradation products As(V) and As(III) in the struvite crystallization was investigated. The results demonstrated that arsenic compounds did not substantially affect the PO{sub 4}{sup 3−}-P recovery, but confirmed the precipitation of arsenic during struvite formation. The precipitation of arsenic compounds in struvite was considerably affected by a solution pH from 9.0 to 11.0. With an increase in pH, the content of ASA and ROX in the precipitation decreased, but the contents of As(III) and As(V) increased. In addition, the arsenic content of As(V) in the struvite was higher than that of As(III), ASA and ROX. The results indicated that the struvite could be contaminated when the solution contains arsenic species, but that could be minimized by controlling the solution pH and maintaining anaerobic conditions during struvite formation.

  12. Chromatographic determination of itopride hydrochloride in the presence of its degradation products.

    Science.gov (United States)

    Kaul, Neeraj; Agrawal, Himani; Maske, Pravin; Rao, Janhavi Ramchandra; Mahadik, Kakasaheb Ramoo; Kadam, Shivajirao S

    2005-08-01

    Two sensitive and reproducible methods are described for the quantitative determination of itopride hydrochloride (IH) in the presence of its degradation products. The first method is based on HPLC separation on a reversed phase Kromasil column [C18 (5-microm, 25 cm x 4.6 mm, ID)] at ambient temperature using a mobile phase consisting of methanol and water (70:30, v/v) adjusted to pH 4.0 with orthophosphoric acid with UV detection at 258 nm. The flow rate was 1.0 mL per min with an average operating pressure of 180 kg/cm2. The second method is based on HPTLC separation on silica gel 60 F254 using toluene:methanol:chloroform:10% ammonia (5.0:3.0:6.0:0.1, v/v/v/v) as mobile phase at 270 nm. The analysis of variance (ANOVA) and Student's t-test were applied to correlate the results of IH determination in dosage form by means of HPLC and HPTLC methods. The drug was subjected to acid and alkali hydrolysis, oxidation, dry heat, wet heat treatment, UV, and photodegradation. The proposed HPLC method was utilized to investigate the kinetics of the acidic, alkaline, and oxidative degradation processes at different temperatures and the apparent pseudo-first-order rate constant, half-life, and activation energy were calculated. In addition the pH-rate profile of degradation of IH in constant ionic strength buffer solutions in the pH range 2-11 was studied.

  13. Recognizing Potential Buprenorphine Medication Misuse: Product Packaging Does Not Degrade With Laundering.

    Science.gov (United States)

    Gunderson, Erik W

    2015-01-01

    Expanded office-based buprenorphine opioid dependence treatment is associated with medication misuse and diversion consequences. Recurrent early refill requests may indicate misuse or diversion, although further research is needed on how to effectively recognize and address the issue in clinical practice. In the current study, patient report of damaged medication from laundering prompted evaluation of laundering on degradation of buprenorphine-containing product packages and contents. Four buprenorphine product packaging approaches were assessed: 3 buprenorphine/naloxone placebo demonstration products (Suboxone and Bunavail film in foil wrappers and Zubsolv tablet in a blister pack) and Rexam-manufactured Screw-Loc closure pill container filled with a chewable aspirin as a surrogate for generic buprenorphine and buprenorphine/naloxone products. Two experimental laundering conditions, wash machine alone (W) and washer/dryer (W+D), were compared with unlaundered control (C) condition. Standard laundering settings were based on patient presentation. Products from the 2 experimental conditions and the control condition were labeled A, B, or C with counterbalanced assignment prior to visual examination of packaging and contents by the investigator who was blinded to condition. Packaging and contents remained intact for all products across experimental conditions, with only minor cosmetic effects compared with control. The W+D Suboxone film had 1-2 mm curling of the wrapper corners. Zubsolv blister packs had slight paper label fading (W+D > W). Bunavail W+D foil had an indentation outlining the inner film. The W+D bottle tablet had a ˜1 mm nick on one edge. No other differences were noted. After implementing more structured treatment and reviewing the results with the patient, he endorsed fabricating the laundering story to get additional medication. Laundering is an unlikely cause of damaged buprenorphine-containing medication packaged in foil wrappers (Suboxone

  14. Wheat straw degradation and production of alternative substrates for nitrogenase of Rhodobacter sphaeroides.

    Science.gov (United States)

    Dziga, Dariusz; Jagiełło-Flasińska, Dominika

    2015-01-01

    Cellulose is a major component of plant biomass and could be applied in the production of biofuels, especially bioethanol. An alternative approach is production of a clean fuel - hydrogen from cellulosic biomass. In this paper an innovatory model of cellulosic waste degradation has been proposed to verify the possibility of utilization of cellulose derivatives by purple non-sulfur bacteria. The concept is based on a two-step process of wheat straw conversion by bacteria in order to obtain an organic acid mixture. In the next stage such products are consumed by Rhodobacter sphaeroides, the known producer of hydrogen. It has been documented that Cellulomonas uda expresses cellulolytic activity in the presence of wheat straw as an only source of carbon. R. sphaeroides applied in this research can effectively consume organic acids released from straw by C. uda and Lactobacillus rhamnosus and is able to grow in the presence of these substrates. Additionally, an increased nitrogenase activity of R. sphaeroides has been indicated when bacteria were cultivated in the presence of cellulose derivatives which suggests that hydrogen production occurs.

  15. Contact sensitizers induce skin inflammation via ROS production and hyaluronic acid degradation.

    Directory of Open Access Journals (Sweden)

    Philipp R Esser

    Full Text Available BACKGROUND: Allergic contact dermatitis (ACD represents a severe health problem with increasing worldwide prevalence. It is a T cell-mediated skin disease induced by protein-reactive organic and inorganic chemicals. A key feature of contact allergens is their ability to trigger an innate immune response that leads to skin inflammation. Previous evidence from the mouse contact hypersensitivity (CHS model suggests a role for endogenous activators of innate immune signaling. Here, we analyzed the role of contact sensitizer induced ROS production and concomitant changes in hyaluronic acid metabolism on CHS responses. METHODOLOGY/PRINCIPAL FINDINGS: We analyzed in vitro and in vivo ROS production using fluorescent ROS detection reagents. HA fragmentation was determined by gel electrophoresis. The influence of blocking ROS production and HA degradation by antioxidants, hyaluronidase-inhibitor or p38 MAPK inhibitor was analyzed in the murine CHS model. Here, we demonstrate that organic contact sensitizers induce production of reactive oxygen species (ROS and a concomitant breakdown of the extracellular matrix (ECM component hyaluronic acid (HA to pro-inflammatory low molecular weight fragments in the skin. Importantly, inhibition of either ROS-mediated or enzymatic HA breakdown prevents sensitization as well as elicitation of CHS. CONCLUSIONS/SIGNIFICANCE: These data identify an indirect mechanism of contact sensitizer induced innate inflammatory signaling involving the breakdown of the ECM and generation of endogenous danger signals. Our findings suggest a beneficial role for anti-oxidants and hyaluronidase inhibitors in prevention and treatment of ACD.

  16. Carbon capture and sequestration: an exploratory inhalation toxicity assessment of amine-trapping solvents and their degradation products.

    Science.gov (United States)

    McDonald, Jacob D; Kracko, Dean; Doyle-Eisele, Melanie; Garner, C Edwin; Wegerski, Chris; Senft, Al; Knipping, Eladio; Shaw, Stephanie; Rohr, Annette

    2014-09-16

    Carbon dioxide (CO2) absorption with aqueous amine solvents is a method of carbon capture and sequestration (CCS) from flue gases. One concern is the possible release of amine solvents and degradation products into the atmosphere, warranting evaluation of potential pulmonary effects from inhalation. The CCS amines monoethanolamine (MEA), methyldiethanolamine (MDEA), and piperazine (PIP) underwent oxidative and CO2-mediated degradation for 75 days. C57bl/6N mice were exposed for 7 days by inhalation of 25 ppm neat amine or equivalant concentration in the degraded mixture. The aqueous solutions were nebulized to create the inhalation atmospheres. Pulmonary response was measured by changes in inflammatory cells in bronchoalveolar lavage fluid and cytokine expression in lung tissue. Ames mutagenicity and CHO-K1 micronucleus assays were applied to assess genotoxicity. Chemical analysis of the test atmosphere and liquid revealed complex mixtures, including acids, aldehydes, and other compounds. Exposure to oxidatively degraded MEA increased (p < 0.05) total cells, neutrophils, and lymphocytes compared to control mice and caused inflammatory cytokine expression (statistical increase at p < 0.05). MEA and CO2-degraded MEA were the only atmospheres to show statistical (p < 0.05) increase in oxidative stress. CO2 degradation resulted in a different composition, less degradation, and lower observed toxicity (less magnitude and number of effects) with no genotoxicity. Overall, oxidative degradation of the amines studied resulted in enhanced toxicity (increased magnitude and number of effects) compared to the neat chemicals.

  17. Lignin degradation, ligninolytic enzymes activities and exopolysaccharide production by Grifola frondosa strains cultivated on oak sawdust

    Directory of Open Access Journals (Sweden)

    Nona A Mikiashvili

    2011-09-01

    Full Text Available Fourteen strains of Grifola frondosa (Dicks. S. F. Gray, originating from different regions (Asia, Europe and North America were tested for lignin degradation, ligninolytic enzyme activities, protein accumulation and exopolysaccharide production during 55 days of cultivation on oak sawdust. Lignin degradation varied from 2.6 to7.1 % of dry weight of the oak sawdust substrate among tested strains. The loss of dry matter in all screened fungi varied between 11.7 and 33.0%, and the amount of crude protein in the dry substrate varied between 0.94 to 2.55%. The strain, MBFBL 596, had the highest laccase activity (703.3 U/l, and the maximum peroxidase activity of 22.6 U/l was shown by the strain MBFBL 684. Several tested strains (MBFBL 21, 638 and 662 appeared to be good producers of exopolysaccharides (3.5, 3.5 and 3.2 mg/ml respectively.

  18. Spatial variation in biodiversity, soil degradation and productivity in agricultural landscapes in the highlands of Tigray, northern Ethiopia

    NARCIS (Netherlands)

    Hadgu, K.M.; Rossing, W.A.H.; Kooistra, L.; Bruggen, van A.H.C.

    2009-01-01

    There is a growing concern about food security and sustainability of agricultural production in developing countries. However, there are limited attempts to quantify agro-biodiversity losses and relate these losses to soil degradation and crop productivity, particularly in Tigray, Ethiopia. In this

  19. Hubble Space Telescope Metallized Teflon(registered trademark) FEP Thermal Control Materials: On-Orbit Degradation and Post-Retrieval Analysis

    Science.gov (United States)

    Townsend, Jacqueline A.; Hansen, Patricia A.; Dever, J. A.; deGroh, K. K.; Banks, B.; Wang, L.; He, C.

    1988-01-01

    During the Hubble Space Telescope (HST) Second Servicing Mission (SM2), degradation of unsupported Teflon(Registered Trademark) FEP (fluorinated ethylene propylene), used as the outer layer of the multilayer insulation (MLI) blankets, was evident as large cracks on the telescope light shield. A sample of the degraded outer layer was retrieved during the mission and returned to Earth for ground testing and evaluation. The results of the Teflon(Registered Trademark) FEP sample evaluation and additional testing of pristine Teflon(Registered Trademark) FEP led the investigative team to theorize that the HST damage was caused by thermal cycling with deep-layer damage from electron and proton radiation which allowed the propagation of cracks along stress concentrations , and that the damage increased with the combined total dose of electrons, protons, UV and x-rays along with thermal cycling. This paper discusses the testing and evaluation of the retrieved Teflon(Registered Trademark) FEP.

  20. Efficient production of mannan-degrading enzymes by the basidiomycete Sclerotium rolfsii.

    Science.gov (United States)

    Sachslehner, A; Haltrich, D; Gübitz, G; Nidetzky, B; Kulbe, K D

    1998-01-01

    Sclerotium rolfsii CBS 191.62 was cultivated on a number of carbon (C) sources, including mono- and disaccharides, as well as on polysaccharides, to study the formation of different mannan-degrading enzyme activities. Highest levels of mannanase activity were obtained when alpha-cellulose-based media were used for growth, but formation of mannanase could not be enhanced by employing galactomannan as the only carbon source. Although both xylanase and cellulase formation was almost completely repressed when S. rolfsii was grown on more readily metabolizable carbohydrates, including glucose or mannose, considerable amounts of mannanase activity were secreted under these growth conditions. Enhanced mannanase production only commenced when glucose was depleted in the medium. The maximal mannanase activity of 240 IU/mL obtained in a laboratory fermentation is remarkable. Mannanase activity formed under these derepressed conditions could be mainly attributed to one major, acidic mannanase isoenzyme with a pI value of 2.75.

  1. Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour

    Directory of Open Access Journals (Sweden)

    Hesam Omrani fard

    2012-12-01

    Full Text Available During  the  past  two  decades  the  use  of  bioplastics,  as  a  suitable  alternative to  petroleum-based  plastics,  has  attracted  researchers'  attention  to  a  great extent.  In  this  study,  the whole wheat four and  straw cellulose at different proportions were mixed with glycerol and bioplastics sheets were obtained by a press type molding machine.  The mechanical  properties  of  samples  were  examined  on compositions prepared by whole wheat weight in three proportions of 70, 60 and 50% and the cellulose in three proportions 75, 70 and 65%. The tensile tests on the samples indicated  that with  lowering  proportions  of  both  four  and  cellulose,  the modulus of elasticity and  tensile  strength of  the bioplastics dropped as well. The maximum modulus of  elasticity  achieved  for  the four  and  cellulose  compositions were 12.5, and 8.6 MPa, and the maximum tensile strengths were 878 and 202 kPa, respectively. The TGA tests indicated that the bioplastics prepared from whole wheat four showed higher temperatures of thermal degradation. The activation energies calculated for the four and cellulose bioplastics, as estimated by Arrhenius type equation, were 133.0 and 63.8 kJ/mol, respectively.

  2. Thermal production, protection, and heat exchange of quantum coherences

    Science.gov (United States)

    Ćakmak, B.; Manatuly, A.; Müstecaplıoǧlu, Ö. E.

    2017-09-01

    We consider finite-sized atomic systems with varying number of particles which have dipolar interactions among them and are also under the collective driving and dissipative effect of a thermal photon environment. Focusing on the simple case of two atoms, we investigate the impact of different parameters of the model on the coherence contained in the system. We observe that, even though the system is initialized in a completely incoherent state, it evolves to a state with a finite amount of coherence and preserves that coherence in the long-time limit in the presence of thermal photons. We propose a scheme to utilize the created coherence in order to change the thermal state of a single two-level atom by having it repeatedly interact with a coherent atomic beam. Finally, we discuss the scaling of coherence as a function of the number of particles in our system up to N =7 .

  3. Advanced retorting, microwave assisted thermal sterilization (MATS), and pressure assisted thermal sterilization (PATS) to process meat products.

    Science.gov (United States)

    Barbosa-Cánovas, Gustavo V; Medina-Meza, Ilce; Candoğan, Kezban; Bermúdez-Aguirre, Daniela

    2014-11-01

    Conventional thermal processes have been very reliable in offering safe sterilized meat products, but some of those products are of questionable overall quality. Flavor, aroma, and texture, among other attributes, are significantly affected during such processes. To improve those quality attributes, alternative approaches to sterilizing meat and meat products have been explored in the last few years. Most of the new strategies for sterilizing meat products rely on using thermal approaches, but in a more efficient way than in conventional methods. Some of these emerging technologies have proven to be reliable and have been formally approved by regulatory agencies such as the FDA. Additional work needs to be done in order for these technologies to be fully adopted by the food industry and to optimize their use. Some of these emerging technologies for sterilizing meat include pressure assisted thermal sterilization (PATS), microwaves, and advanced retorting. This review deals with fundamental and applied aspects of these new and very promising approaches to sterilization of meat products. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Tetrabromobisphenol-A, hexabromocyclododecane and its degradation products in UK human milk: relationship to external exposure.

    Science.gov (United States)

    Abdallah, Mohamed Abou-Elwafa; Harrad, Stuart

    2011-02-01

    Tetrabromobisphenol-A (TBBP-A), hexabromocyclododecane (HBCD) and its degradation products were determined in 34 human milk samples from Birmingham, UK. TBBP-A was detected in 36% of samples (average=0.06 ng g(-1) lw), with HBCDs detected in all samples (average ΣHBCDs=5.95 ng g(-1) lw). α-HBCD comprised 62-95% ΣHBCDs while β- and γ-HBCD constituted 2-18% and 3-33% respectively. Enantioselective enrichment of (-)-α-HBCD (average enantiomer fraction=0.29) was observed indicating potential enantioselectivity associated with HBCD absorption, metabolism and/or excretion. The degradation products pentabromocyclododecenes (average=0.04 ng g(-1) lw; n=9) and tetrabromocyclododecadienes (average=0.15 ng g(-1) lw; n=25) were detected for the first time in human tissues. Average exposures of a nursing infant to ΣHBCDs and TBBP-A (35 and 1 ng kg(-1) bw day(-1) respectively) via breast milk exceeded upper-bound dietary intakes of both UK adults and toddlers. Using a simple pharmacokinetic model, intakes of UK adults via inhalation, diet and dust ingestion were converted to predicted body burdens. Predictions compared well with those observed for HBCDs but observed body burdens of TBBP-A exceeded predictions. This may indicate the human half-life of TBBP-A is greater than observed previously, that intakes may be underestimated, or that concentrations reported here reflect recent elevated episodic exposure. Copyright © 2010 Elsevier Ltd. All rights reserved.

  5. Raphasatin is a more potent inducer of the detoxification enzymes than its degradation products.

    Science.gov (United States)

    Scholl, Chris; Eshelman, Bruce D; Barnes, David M; Hanlon, Paul R

    2011-04-01

    The biological activity of cruciferous vegetables is hypothesized to be due to the metabolites of a class of phytochemicals called glucosinolates. The chemical properties of these metabolites, including isothiocyanates, determine the biological activity of these compounds and thus their effects on human health. The 2 primary radish (Raphanus sativus L.) glucosinolates, glucoraphasatin, and glucoraphenin, were isolated using solid phase extraction followed by preparative HPLC purification. In an aqueous environment, 77.6% of the maximum amount of sulforaphene produced by the metabolism of glucoraphenin was present after 24 h. Under the same conditions raphasatin, the isothiocyanate metabolite of glucoraphasatin and the oxidized counterpart of sulforaphene, was highly unstable with a half-life of less than 30 min and no raphasatin was detectable after 24 h. In HepG2 cells, raphasatin-induced quinone reductase activity and the RNA expression of several phase 1 and 2 detoxification enzymes by a significantly greater amount than the degradation products of raphasatin. Raphasatin, but not its degradation products, activated the antioxidant response element (ARE) in a stably-transfected reporter cell line. Mice fed a diet consisting of 20% freeze dried radishes for 2 wk had significantly higher liver expression of cytochrome P450 (CYP) 1A1, 1A2, quinone reductase, microsomal epoxide hydrolase, and glutathione S-transferase α2 than mice fed a nutritionally-matched control diet.   Glucoraphasatin, the primary glucosinolate in radishes, is metabolized into an isothiocyanate (raphasatin) that has biological activity but is also unstable in an aqueous environment. Despite the instability of raphasatin, dietary exposure to radishes produced significant induction of detoxification enzymes. Understanding the chemical properties of raphasatin, both in terms of biological activity and instability, could help develop processing methods to retain the most activity from radishes

  6. Heterologous Expression of Plant Cell Wall Degrading Enzymes for Effective Production of Cellulosic Biofuels

    Science.gov (United States)

    Jung, Sang-Kyu; Parisutham, Vinuselvi; Jeong, Seong Hun; Lee, Sung Kuk

    2012-01-01

    A major technical challenge in the cost-effective production of cellulosic biofuel is the need to lower the cost of plant cell wall degrading enzymes (PCDE), which is required for the production of sugars from biomass. Several competitive, low-cost technologies have been developed to produce PCDE in different host organisms such as Escherichia coli, Zymomonas mobilis, and plant. Selection of an ideal host organism is very important, because each host organism has its own unique features. Synthetic biology-aided tools enable heterologous expression of PCDE in recombinant E. coli or Z. mobilis and allow successful consolidated bioprocessing (CBP) in these microorganisms. In-planta expression provides an opportunity to simplify the process of enzyme production and plant biomass processing and leads to self-deconstruction of plant cell walls. Although the future of currently available technologies is difficult to predict, a complete and viable platform will most likely be available through the integration of the existing approaches with the development of breakthrough technologies. PMID:22911272

  7. Degradation of vitamin C in a product made from mango (Mangifera indica L. and whey protein

    Directory of Open Access Journals (Sweden)

    Fernando Alonso Mendoza-Corvis

    2017-01-01

    Full Text Available This study aimed to determine the kinetics of vitamin C degradation in a product made from mango pulp (Mangifera indica L. and whey protein powder, in order to determine the effect of temperature on its conservation and further evaluate the behavior of the L*, a*, b* and the total color difference (ΔE in the powder product. Vitamin C was determined by the aoac 967.21/90 method using 2,6-dichlorophenol indophenol, and the color was quantified with a HunterLab Color Flex EZ colorimeter. Vitamin C showed greater stability in the powder product ResumoEsta pesquisa procurou determinar a cinética de degradação da vitamina C em um produto em pó elaborado a base de polpa de manga (Mangifera indica L. var. Hilacha e lactisoro, com o fim de conhecer o efeito da temperatura na sua conservação e ademais avaliar o comportamento dos parâmetros L*, a*, b* e a diferença total da cor (ΔE no produto. A vitamina C determinou-se mediante o método aoac 967.21/90, com 2,6-diclorofenol indofe-nol; enquanto que a cor se quantificou com um colorímetro cor Flex EZ marca HunterLab. A vitamina C exibiu maior estabilidade no produto em pó armazenado a uma temperatura de 4 °C, stored at 4 °C with a concentration at the end of the eighth sampling week of 13.94 ± 1.2 mg/10 0 g-1 sample and showing a first order degradation kinetics with k1 values of 0.014 and 0.041 mg/100 g/week at temperatures of 4 °C and 28 °C, respec-tively. The greatest variations in color occurred in samples stored at 28 °C, indicating the influence of the temperature change on the product compo-nents. In addition, L*, a* and b* parameters were less affected under storage temperature of 4 °C, and their values correspond to a second degree polynomial.

  8. Toxicity of tetracyclines and tetracycline degradation products to environmentally relevant bacteria, including selected tetracycline-resistant bacteria

    DEFF Research Database (Denmark)

    Halling-Sørensen, B.; Sengeløv, G.; Tjørnelund, J.

    2002-01-01

    Tetracyclines used in veterinary therapy invariably will find their way as parent compound and degradation products to the agricultural field. Major degradation products formed due to the limited stability of parent tetracyclines (tetracycline, chlortetracycline, and oxytetracycline) in aqueous...... solution were theoretically identified at various environmental conditions, such as pH, presence of chelating, metals, and fight. Their potency was assessed on sludge bacteria, tetracycline-sensitive soil bacteria, and tetracycline-resistant strains. Several of the degradation products had potency...... at the same concentration level as tetracycline, chlortetracycline, and oxytetracycline on both the sludge and the tetracycline-sensitive soil bacteria. Further, both 5a,6-anhydrotetracychne and 5a,6-anhydrochlortetracycline had potency on tetracycline-resistant bacteria supporting a mode of action different...

  9. Organophosphate Triesters and Diester Degradation Products in Municipal Sludge from Wastewater Treatment Plants in China: Spatial Patterns and Ecological Implications.

    Science.gov (United States)

    Fu, Lingfang; Du, Bibai; Wang, Fei; Lam, James C W; Zeng, Lixi; Zeng, Eddy Y

    2017-12-05

    Little is known about the occurrences, distributions, sources, and potential risks of organophosphate (OP) triesters and diester degradation products in municipal sludge from wastewater treatment plants (WWTPs). In this study, we conducted the first nationwide survey to simultaneously determine a suite of 11 OP triesters and six diester degradation products in sludge from WWTPs across China. All OP triesters were detected and three diesters were identified for the first time in sludge samples. Total concentrations of OP triesters and diester degradation products were in the ranges of 43.9-2160 and 17.0-1300 ng (g of dry weight) -1 , respectively, indicating relatively low pollution levels in China compared with those of several developed countries. A distinct geographical variation of higher concentrations of OP triesters and diesters in East China than in Central and West China was observed, suggesting that regional levels of organophosphate esters are associated with the magnitudes of regional economic development. Source analysis revealed nonchlorinated OP diesters are mainly derived from degradation in WWTPs, while chlorinated OP diesters were largely sourced from outside WWTPs. The estimated total emission fluxes of OP triesters and diesters via land-application sludge in China were approximately 330 and 134 kg/year, respectively. Further risk assessment based on risk quotient values in sludge-applied soils indicated low to medium risks for most OP triesters and diesters except tris(methylphenyl) phosphate. The significant accumulation of OP triesters and widespread occurrence of diester degradation products in sludge raise environmental concerns about these contaminants.

  10. The effect of thermal treatment on the quality changes of Antartic krill meal during the manufacturing process: High processing temperatures decrease product quality

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Bruheim, Inge; Ale, Marcel Tutor

    2015-01-01

    during their manufacturing process. It is hypothesized that non-enzymatic browning reactions in krill products might occur through Maillard reaction or lipid peroxidation pathways. Practical applications: The quality of krill products is influenced by the temperature used during their manufacturing......The quality of krill products is influenced by their manufacturing process and could be evaluated by their degradation products from lipid oxidation and non-enzymatic browning reactions. The main objectives of this study were: (i) to investigate the effect of thermal treatment on these two...... reactions in krill products during their manufacturing process; and (ii) to understand and postulate the possible mechanisms for non-enzymatic browning reactions in krill products. Characterisation of krill products at different stages was obtained by determination of their lipid composition (lipid classes...

  11. Multi-Use Solar Thermal System for Oxygen Production from Lunar Regolith [7227-570] Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop an innovative solar thermal system for oxygen production from lunar regolith. In this system solar radiation is collected by the concentrator...

  12. Optimization of liquid-state fermentation conditions for the glyphosate degradation enzyme production of strain Aspergillus oryzae by ultraviolet mutagenesis.

    Science.gov (United States)

    Fu, Gui-Ming; Li, Ru-Yi; Li, Kai-Min; Hu, Ming; Yuan, Xiao-Qiang; Li, Bin; Wang, Feng-Xue; Liu, Cheng-Mei; Wan, Yin

    2016-11-16

    This study aimed to obtain strains with high glyphosate-degrading ability and improve the ability of glyphosate degradation enzyme by the optimization of fermentation conditions. Spore from Aspergillus oryzae A-F02 was subjected to ultraviolet mutagenesis. Single-factor experiment and response surface methodology were used to optimize glyphosate degradation enzyme production from mutant strain by liquid-state fermentation. Four mutant strains were obtained and named as FUJX 001, FUJX 002, FUJX 003, and FUJX 004, in which FUJX 001 gave the highest total enzyme activity. Starch concentration at 0.56%, GP concentration at 1,370 mg/l, initial pH at 6.8, and temperature at 30°C were the optimum conditions for the improved glyphosate degradation endoenzyme production of A. oryzae FUJX 001. Under these conditions, the experimental endoenzyme activity was 784.15 U/100 ml fermentation liquor. The result (784.15 U/100 ml fermentation liquor) was approximately 14-fold higher than that of the original strain. The result highlights the potential of glyphosate degradation enzyme to degrade glyphosate.

  13. High-temperature degradation of one-dimensional metallodielectric (W/SiO2) photonic crystal as selective thermal emitter for thermophotovoltaic system

    Science.gov (United States)

    Kim, Jin Hwan; Jung, Sang Min; Shin, Moo Whan

    2017-10-01

    In this paper, thermal stability of a one-dimensional metallodielectric photonic crystal (1D MDPhC) structure based on W and SiO2 for thermophotovoltaic systems is reported. The thermal degradation mechanism of the structure, in its operating temperature range, is thoroughly investigated by using energy dispersive spectroscopy (EDS) with transmission electron microscope (TEM) and depth-profiling X-ray photoelectron spectroscopy (XPS). It is found that the structure is entirely destroyed under 1400 K by an inter-diffusion process forming a mixture of W and SiO2 without measurable oxidization of W. But, long-term annealing results in oxidization of W layer even at a lower temperature of 1300 K. During the long-term annealing, oxygen atoms in outside atmosphere are believed to cause oxidation of the upper W layer below the top SiO2 layer. Additionally, delaminated spots are observed over the surface. These thermal behaviors are potential clues to prevent or minimize thermal degradation of the multilayer structure under high temperature operation.

  14. Access the toxic effect of the antibiotic cefradine and its UV light degradation products on two freshwater algae.

    Science.gov (United States)

    Chen, J Q; Guo, R X

    2012-03-30

    Two common freshwater algae Microcystis aeruginosa and Scenedesmus obliquus were employed as test organism to evaluate the toxic effects of the widely used antibiotic, cefradine. In general, cefradine had significantly toxic effect on population growth and chlorophyll-a accumulation of two algae and the cyanophyceae was more sensitive than the chlorophyceae. In addition, cefradine UV light degraded products had adverse effect on M. aeruginosa's growth and chlorophyll-a accumulation. In comparison, even if S. obliquus had growth ability when exposed to cefradine UV light-degradation products, the algal photosynthesis function was also disrupted. Copyright © 2012 Elsevier B.V. All rights reserved.

  15. Application of thermal analysis techniques in activated carbon production

    Science.gov (United States)

    Donnals, G.L.; DeBarr, J.A.; Rostam-Abadi, M.; Lizzio, A.A.; Brady, T.A.

    1996-01-01

    Thermal analysis techniques have been used at the ISGS as an aid in the development and characterization of carbon adsorbents. Promising adsorbents from fly ash, tires, and Illinois coals have been produced for various applications. Process conditions determined in the preparation of gram quantities of carbons were used as guides in the preparation of larger samples. TG techniques developed to characterize the carbon adsorbents included the measurement of the kinetics of SO2 adsorption, the performance of rapid proximate analyses, and the determination of equilibrium methane adsorption capacities. Thermal regeneration of carbons was assessed by TG to predict the life cycle of carbon adsorbents in different applications. TPD was used to determine the nature of surface functional groups and their effect on a carbon's adsorption properties.

  16. Influence of Thermal and Bacterial Pretreatment of Microalgae on Biogas Production in Mesophilic and Thermophilic Conditions.

    Science.gov (United States)

    Vidmar, Beti; Marinšek Logar, Romana; Panjičko, Mario; Fanedl, Lijana

    2017-01-01

    Microalgae biomass has a great potential in search for new alternative energy sources. They can be used as a substrate for the biogas production in anaerobic digestion. When using microalgae, the efficiency of this process is hampered due to the resistant cell wall. In order to accelerate the hydrolysis of cell wall and increase the efficiency of biogas production we applied two different pretreatments - biological and thermal under mesophilic and thermophilic conditions. During biological pretreatment we incubated microalgae with anaerobic hydrolytic bacteria Pseudobutyrivibrio xylanivorans Mz5T. In thermal pretreatment we incubated microalgae at 90 °C. We also tested a combined thermal and biological pretreatment in which we incubated P. xylanivorans Mz5T with thermally pretreated microalgae. Thermal pretreatment in mesophilic and thermophilic process has increased methane production by 21% and 6%, respectively. Biological pretreatment of microalgae has increased methane production by 13%, but only under thermophilic conditions (pretreatment under mesophilic conditions showed no effect on methane production). Thermal-biological pretreatment increased methane production by 12% under thermophilic conditions and by 6% under mesophilic conditions.

  17. The Inhibitory Effect of Natural Products on Protein Fibrillation May Be Caused by Degradation Products – A Study Using Aloin and Insulin

    Science.gov (United States)

    Lobbens, Eva S.; Foderà, Vito; Nyberg, Nils T.; Andersen, Kirsten; Jäger, Anna K.; Jorgensen, Lene; van de Weert, Marco

    2016-01-01

    Protein fibrillation is the pathological hallmark of several neurodegenerative diseases and also complicates the manufacturing and use of protein drugs. As a case study, the inhibitory activity of the natural compound aloin against insulin fibrillation was investigated. Based on Thioflavin T assays, high-performance liquid chromatography and transmission electron microscopy it was found that a degradation product of aloin, formed over weeks of storage, was able to significantly inhibit insulin fibrillation. The activity of the stored aloin was significantly reduced in the presence of small amounts of sodium azide or ascorbic acid, suggesting the active compound to be an oxidation product. A high-performance liquid chromatography method and a liquid chromatography-mass spectrometry method were developed to investigate the degradation products in the aged aloin solution. We found that the major compounds in the solution were aloin A and aloin B. In addition, 10-hydroxy aloin and elgonica dimers were detected in smaller amounts. The identified compounds were isolated and tested for activity by means of Thioflavin T assays, but no activity was observed. Thus, the actual fibrillation inhibitor is an as yet unidentified and potentially metastable degradation product of aloin. These results suggest that degradation products, and in particular oxidation products, are to be considered thoroughly when natural products are investigated for activity against protein fibrillation. PMID:26882071

  18. The Inhibitory Effect of Natural Products on Protein Fibrillation May Be Caused by Degradation Products--A Study Using Aloin and Insulin.

    Directory of Open Access Journals (Sweden)

    Eva S Lobbens

    Full Text Available Protein fibrillation is the pathological hallmark of several neurodegenerative diseases and also complicates the manufacturing and use of protein drugs. As a case study, the inhibitory activity of the natural compound aloin against insulin fibrillation was investigated. Based on Thioflavin T assays, high-performance liquid chromatography and transmission electron microscopy it was found that a degradation product of aloin, formed over weeks of storage, was able to significantly inhibit insulin fibrillation. The activity of the stored aloin was significantly reduced in the presence of small amounts of sodium azide or ascorbic acid, suggesting the active compound to be an oxidation product. A high-performance liquid chromatography method and a liquid chromatography-mass spectrometry method were developed to investigate the degradation products in the aged aloin solution. We found that the major compounds in the solution were aloin A and aloin B. In addition, 10-hydroxy aloin and elgonica dimers were detected in smaller amounts. The identified compounds were isolated and tested for activity by means of Thioflavin T assays, but no activity was observed. Thus, the actual fibrillation inhibitor is an as yet unidentified and potentially metastable degradation product of aloin. These results suggest that degradation products, and in particular oxidation products, are to be considered thoroughly when natural products are investigated for activity against protein fibrillation.

  19. The Inhibitory Effect of Natural Products on Protein Fibrillation May Be Caused by Degradation Products--A Study Using Aloin and Insulin.

    Science.gov (United States)

    Lobbens, Eva S; Foderà, Vito; Nyberg, Nils T; Andersen, Kirsten; Jäger, Anna K; Jorgensen, Lene; van de Weert, Marco

    2016-01-01

    Protein fibrillation is the pathological hallmark of several neurodegenerative diseases and also complicates the manufacturing and use of protein drugs. As a case study, the inhibitory activity of the natural compound aloin against insulin fibrillation was investigated. Based on Thioflavin T assays, high-performance liquid chromatography and transmission electron microscopy it was found that a degradation product of aloin, formed over weeks of storage, was able to significantly inhibit insulin fibrillation. The activity of the stored aloin was significantly reduced in the presence of small amounts of sodium azide or ascorbic acid, suggesting the active compound to be an oxidation product. A high-performance liquid chromatography method and a liquid chromatography-mass spectrometry method were developed to investigate the degradation products in the aged aloin solution. We found that the major compounds in the solution were aloin A and aloin B. In addition, 10-hydroxy aloin and elgonica dimers were detected in smaller amounts. The identified compounds were isolated and tested for activity by means of Thioflavin T assays, but no activity was observed. Thus, the actual fibrillation inhibitor is an as yet unidentified and potentially metastable degradation product of aloin. These results suggest that degradation products, and in particular oxidation products, are to be considered thoroughly when natural products are investigated for activity against protein fibrillation.

  20. Thermal hydraulic parametric investigation of decay heat removal from degraded core of a sodium cooled fast Breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Verma, Lokesh [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Kumar Sharma, Anil, E-mail: aksharma@igcar.gov.in [Reactor Design Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam (India); Velusamy, K. [Reactor Design Group, Indira Gandhi Centre for Atomic Research, HBNI, Kalpakkam (India)

    2017-03-15

    Highlights: • Decay heat removal from degraded core of a typical SFR is highlighted. • Influence of number of DHXs in operation on PAHR is analyzed. • Investigations on structural integrity of the inner vessel and core catcher. • Feasibility study for retention of a part of debris in upper pool of SFR. - Abstract: Ensuring post accident decay heat removal with high degree of reliability following a Core Disruptive Accident (CDA) is very important in the design of sodium cooled fast reactors (SFR). In the recent past, a lot of research has been done towards the design of an in-vessel core catcher below the grid plate to prevent the core debris reaching the main vessel in a pool type SFR. However, during an energetic CDA, the entire core debris is unlikely to reach the core catcher. A significant part of the debris is likely to settle in core periphery between radial shielding subassemblies and the inner vessel. Failure of inner vessel due to the decay heat can lead to core debris reaching the main vessel and threatening its integrity. On the other hand, retention of a part of debris in core periphery can reduce the load on main core catcher. Towards achieving an optimum design of SFR and safety evaluation, it is essential to quantify the amount of heat generating core debris that can be retained safely within the primary vessel. This has been performed by a mathematical simulation comprising solution of 2-D transient form of the governing equations of turbulent sodium flow and heat transfer with Boussinesq approximations. The conjugate conduction-convection model adopted for this purpose is validated against in-house experimental data. Transient evolutions of natural convection in the pools and structural temperatures in critical components have been predicted. It is found that 50% of the core debris can be safely accommodated in the gap between radial shielding subassemblies and inner vessel without exceeding structural temperature limit. It is also

  1. Evaluation of the gas production economics of the gas hydrate cyclic thermal injection model. [Cyclic thermal injection

    Energy Technology Data Exchange (ETDEWEB)

    Kuuskraa, V.A.; Hammersheimb, E.; Sawyer, W.

    1985-05-01

    The objective of the work performed under this directive is to assess whether gas hydrates could potentially be technically and economically recoverable. The technical potential and economics of recovering gas from a representative hydrate reservoir will be established using the cyclic thermal injection model, HYDMOD, appropriately modified for this effort, integrated with economics model for gas production on the North Slope of Alaska, and in the deep offshore Atlantic. The results from this effort are presented in this document. In Section 1, the engineering cost and financial analysis model used in performing the economic analysis of gas production from hydrates -- the Hydrates Gas Economics Model (HGEM) -- is described. Section 2 contains a users guide for HGEM. In Section 3, a preliminary economic assessment of the gas production economics of the gas hydrate cyclic thermal injection model is presented. Section 4 contains a summary critique of existing hydrate gas recovery models. Finally, Section 5 summarizes the model modification made to HYDMOD, the cyclic thermal injection model for hydrate gas recovery, in order to perform this analysis.

  2. Only low methane production and emission in degraded peat extraction sites after rewetting

    Science.gov (United States)

    Agethen, Svenja; Waldemer, Carolin; Knorr, Klaus-Holger

    2015-04-01

    In Central Europe rewetting of bogs after peat extraction is a wide spread technique to halt secondary aerobic decomposition and to reestablish plant species such as Sphagnum spp. and Eriophorum spp. that initialize accumulation of organic carbon in peat. Before extraction, such sites are often used for agriculture causing the aerobic degradation of peat and mobilization of phosphorus, ammonia, and dissolved organic matter (DOM). In nutrient poor ecosystems such as bogs, additional supply of P and N does not only trigger the establishment of uncharacteristic vegetation but also the formation of more labile plant litter and DOM that is readily degradable. Therefore, after rewetting and the development of anoxic conditions especially in initial stages high methane (CH4) emissions are reported for these systems compared to pristine bogs. Regarding the potential of methane production and emissions we investigated three common practices to prepare extraction fields for restoration (years since rewetting): i) Filling of drainage ditches, passive rewetting (1 site, Altendorfer Moor, Stade, NW-Germany, ca. 20 yr.), ii) Removal of upper 30 cm peat layer, removed peat used for construction of polder dikes (2 sites, Königsmoor, Leer, NW-Germany, 2 and 3 yr.), iii) Removal upper peat layer down to 50 cm grown peat, not extracted peat used as polder walls (2 sites, Benthullener Moor, Wardenburg, NW-Germany, 3 and 7 yr.). In each site two vegetated replicate mesocosms (diam. 30 cm, depth 40 cm) were sampled and placed in a greenhouse from May-October 2014 to maintain the water table at surface level. Pore water concentrations of ions, fermentation products and DOM, DOM electron acceptor capacity (EAC), soil gas concentrations of CO2, CH4 and H2, gas fluxes as well as element composition and organic matter quality of DOM and SOM were analyzed. We found out that practice i) with least efforts of nutrient removal in the peat produced the highest CH4 emissions (3.5 mmol m-2 d-1

  3. Pseudomonas pseudoalcaligenes CECT5344, a cyanide-degrading bacterium with by-product (polyhydroxyalkanoates) formation capacity.

    Science.gov (United States)

    Manso Cobos, Isabel; Ibáñez García, María Isabel; de la Peña Moreno, Fernando; Sáez Melero, Lara Paloma; Luque-Almagro, Víctor Manuel; Castillo Rodríguez, Francisco; Roldán Ruiz, María Dolores; Prieto Jiménez, María Auxiliadora; Moreno Vivián, Conrado

    2015-06-10

    Cyanide is one of the most toxic chemicals produced by anthropogenic activities like mining and jewelry industries, which generate wastewater residues with high concentrations of this compound. Pseudomonas pseudoalcaligenes CECT5344 is a model microorganism to be used in detoxification of industrial wastewaters containing not only free cyanide (CN(-)) but also cyano-derivatives, such as cyanate, nitriles and metal-cyanide complexes. Previous in silico analyses suggested the existence of genes putatively involved in metabolism of short chain length (scl-) and medium chain length (mcl-) polyhydroxyalkanoates (PHAs) located in three different clusters in the genome of this bacterium. PHAs are polyesters considered as an alternative of petroleum-based plastics. Strategies to optimize the bioremediation process in terms of reducing the cost of the production medium are required. In this work, a biological treatment of the jewelry industry cyanide-rich wastewater coupled to PHAs production as by-product has been considered. The functionality of the pha genes from P. pseudoalcaligenes CECT5344 has been demonstrated. Mutant strains defective in each proposed PHA synthases coding genes (Mpha(-), deleted in putative mcl-PHA synthases; Spha(-), deleted in the putative scl-PHA synthase) were generated. The accumulation and monomer composition of scl- or mcl-PHAs in wild type and mutant strains were confirmed by gas chromatography-mass spectrometry (GC-MS). The production of PHAs as by-product while degrading cyanide from the jewelry industry wastewater was analyzed in batch reactor in each strain. The wild type and the mutant strains grew at similar rates when using octanoate as the carbon source and cyanide as the sole nitrogen source. When cyanide was depleted from the medium, both scl-PHAs and mcl-PHAs were detected in the wild-type strain, whereas scl-PHAs or mcl-PHAs were accumulated in Mpha(-) and Spha(-), respectively. The scl-PHAs were identified as homopolymers of 3

  4. The UV-derivative spectrophotometry for the determination of doripenem in the presence of its degradation products.

    Science.gov (United States)

    Cielecka-Piontek, J; Jelińska, A

    2010-10-01

    A spectrophotometric method was developed for the quantitative determination of doripenem in pharmaceutical dosage form (DORIBAX) in the presence of its degradation products. The first-derivative with or without the substration technique, depending on formed products degradation was applied (lambda=324 nm). The method was linear in the range concentration (0.42-11.30)x10(-2)mg L(-1) (r=0.9981), the limits of detection and quantification were 7.60 and 45.0 microg L(-1), respectively. Recovery of doripenem ranged from 99.85 to 102.97% in pharmaceutical dosage form. This method had a good precision (RDS from 0.35 to 2.93%). The observed rate constants for doripenem degradation were comparable to those obtained in recommended HPLC method. Copyright 2010 Elsevier B.V. All rights reserved.

  5. Improved mannan-degrading enzymes' production by Aspergillus niger through medium optimization.

    Science.gov (United States)

    Mohamad, Siti Norita; Ramanan, Ramakrishnan Nagasundara; Mohamad, Rosfarizan; Ariff, Arbakariya B

    2011-02-28

    The effect of different carbon and nitrogen sources on the production of mannan-degrading enzymes, focussing on β-mannanase, by Aspergillus niger was investigated using shake flask culture. The β-mannanase activity obtained during growth of A. niger on guar gum (GG, 1495 nkat mL(-1)) was much higher than those observed on other carbon substrates, locust bean gum (1148 nkat mL(-1)), α-cellulose (10.7 nkat mL(-1)), glucose (8.8 nkat mL(-1)) and carboxymethylcellulose (4.6 nkat mL(-1)). For fermentation using GG as a carbon source, bacteriological peptone gave the highest β-mannanase activity (1744 nkat mL(-1)) followed by peptone from meat (1168 nkat mL(-1)), yeast extract (817 nkat mL(-1)), ammonium sulphate (241 nkat mL(-1)), ammonium nitrate (113 nkat mL(-1)) and ammonium chloride (99 nkat mL(-1)) when used as a nitrogen source. The composition of bacteriological peptone and initial pH of the medium were further optimized using response surface methodology (RSM). Medium consisted of 21.3 g L(-1) GG and 57 g L(-1) peptone with initial culture pH of 5.5 was optimum for β-mannanase production (2063 nkat mL(-1)) by A. niger. The β-mannanase production obtained in this study using A. niger was significantly higher than those reported in the literature. Copyright © 2010 Elsevier B.V. All rights reserved.

  6. First and second derivative synchronous fluorescence and spectrophotometric spectroscopy for the simultaneous determination of fexofenadine hydrochloride in presence of its degradation products. Application to stability studies.

    Science.gov (United States)

    El-Din, Mohie Khaled Sharaf; Ibrahim, Fawzia Ahmed; Eid, Manal Ibrahim; Wahba, Mary Elias Kamel

    2011-06-01

    Two rapid, simple, sensitive, selective and economic derivative spectrophotometric (first [D1] and second [D2]) and synchronous spectrofluorimetric (FDSFS and SDSFS) methods have been developed for the analysis of fexofenadine hydrochloride (FXD) in the presence of its different degradation products. Derivative spectrophotometry (D1) was used to measure FXD at 223 nm in the presence of its alkaline or acidic degradation products, and at 211 nm in the presence of its oxidative degradation product. Derivative spectrophotometry (D2) was used to determine FXD at 217 nm in the presence of its alkaline or acidic degradation products, and at 215 nm in the presence of its oxidative degradation product; the UV degradation product was measured at 211 nm. Synchronous spectrofluorimetry (FDSFS) was used to measure FXD in the presence of its alkaline or acidic degradation products at 406 nm, and at 367 nm in the presence of its oxidative or UV degradation products. Synchronous spectrofluorimetry (SDSFS) was applied to determine the drug at 225 nm in the presence of its alkaline, acidic, oxidative or UV degradation products. The proposed methods were successfully applied for the determination of the studied compound in its commercial tablets. The results obtained were in good agreement with those obtained by the comparison method.

  7. A validated inherent stability indicating HPTLC method for estimation of cyclobenzaprine hydrochloride in tablets and use of MS–QTOF in characterization of its alkaline stress degradation product

    Directory of Open Access Journals (Sweden)

    Minal T. Harde

    2016-12-01

    Full Text Available A simple, selective and sensitive stability indicating high-performance thin-layer chromatographic method was developed and validated for estimation of cyclobenzaprine hydrochloride (CBP in bulk drug and commercial tablets according to ICH guidelines. A precoated silica gel 60F254 HPTLC plates were used for chromatographic separation using mobile phase toluene: ethyl acetate: methanol: glacial acetic acid in the ratio 4:2:3.5:0.5 v/v/v/v. A TLC scanner was set at detection wavelength 290 nm for densitometric analysis of analyte on absorbance mode. The degradants were resolved satisfactorily in a mixture of stressed sample having Rf values 0.48 ± 0.05, 0.52 ± 0.05, 0.86 ± 0.05, 0.66 ± 0.05 and 0.27 ± 0.05. The calibration curve of drug was found linear in the concentration range 200–1000 ng/band. The (r2 > 0.999 correlation coefficient value indicated good correlation between the analyte concentrations and peak areas. The repeatability and intermediate precision study revealed the % RSD value less than 2.0 and was found to be satisfactory. The accuracy of developed method was ascertained by performing the recovery study using standard addition method and expressed by percent recovery (100.32% which was found satisfactory. CBP was subjected to various stress conditions as per International Conference on Harmonization (ICH guidelines. The drug showed significant degradation during hydrolytic and oxidative stress condition. CBP remained stable in thermal and photolytic stress testing. The validated chromatographic method was further utilized to isolate the alkaline degradation product using preparative HPTLC technique and extensive FT-IR, ESI-MS/TOF studies were performed to ascertain the structure of degradant.

  8. Usage of waste products from thermal recycling of plastics waste in enhanced oil recovery or in-situ coal conversion

    Energy Technology Data Exchange (ETDEWEB)

    Fink, M.; Fink, J.K. [Montanuniversitaet Leoben (Austria)

    1998-09-01

    In this contribution a thermal method for crude oil mobilization and in-situ liquefaction of coal is discussed, which will finally yield more organic material, as which has been put in from plastics waste originally into the process. The conversion product from thermal treatment is pumped down into exhausted crude oil reservoirs, where the hydrogen can degrade the residual high viscous oil to cause it to become more prone to flow so that it can be recovered. Such a process will envision two goals: 1. more organic raw material (as crude oil) will be recovered than is initially put in as waste product. 2. atmospheric pollutants from the conversion plant will be trapped in the reservoir, which simplifies the construction of the plant. An analogous process may be performed with coal seams. Coal seams with their high porosity and large specific surface are believed to be in particular useful to filter atmospheric pollutants. Depending on the type of coal the mobilization of organic material by this process may be in the background. (orig./SR)

  9. Accurate quantitation of pentaerythritol tetranitrate and its degradation products using liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry

    NARCIS (Netherlands)

    Brust, H.; Asten, A. van; Koeberg, M.; Dalmolen, J.; Heijden, A.E.D.M. van der; Schoenmakers, P.

    2014-01-01

    After an explosion of pentaerythritol tetranitrate (PETN), its degradation products pentaerythritol trinitrate (PETriN), dinitrate (PEDiN) and mononitrate (PEMN) were detected using liquid chromatography-atmospheric-pressure chemical-ionization-mass spectrometry (LC-APCI-MS). Discrimination between

  10. Production and partial characterization of arabinoxylan-degrading enzymes by Penicillium brasilianum under solid-state fermentation

    DEFF Research Database (Denmark)

    Panagiotou, Gianni; Granouillet, P.; Olsson, Lisbeth

    2006-01-01

    The production of a battery of arabinoxylan-degrading enzymes by the fungus Penicillium brasilianum grown on brewer's spent grain (BSG) under solid-state fermentation was investigated. Initial moisture content, initial pH, temperature, and nitrogen source content were optimized to achieve maximum...

  11. Investigation of relationships between removals of tetracycline and degradation products and physicochemical parameters in municipal wastewater treatment plant.

    Science.gov (United States)

    Topal, Murat; Uslu Şenel, Gülşad; Öbek, Erdal; Arslan Topal, E Işıl

    2016-05-15

    Determination of the effect of physicochemical parameters on the removal of tetracycline (TC) and degradation products is important because of the importance of the removal of antibiotics in Wastewater Treatment Plant (WWTP). Therefore, the purpose of this study was to investigate the relationships between removals of TC and degradation products and physicochemical parameters in Municipal Wastewater Treatment Plant (MWWTP). For this aim, (i) the removals of physicochemical parameters in a MWWTP located in Elazığ city (Turkey) were determined (ii) the removals of TC and degradation products in MWWTP were determined (iii) the relationships between removals of TC and degradation products and physicochemical parameters were investigated. TC, 4-epitetracycline (ETC), 4-epianhydrotetracycline (EATC), anhydrotetracycline (ATC), and physicochemical parameters (pH, temperature, electrical conductivity (EC), suspended solids (SS), BOD5, COD, total organic carbon (TOC), NH4(+)-N, NO2(-)-N, NO3(-)-N and O-PO4(-3)) were determined. The calculation of the correlation coefficients of relationships between the physicochemical parameters and TC, EATC, ATC showed that, among the investigated parameters, EATC and SS most correlated. The removals of other physicochemical parameters were not correlated with TC, EATC and ATC. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Progressive degradation of crude oil n-alkanes coupled to methane production under mesophilic and thermophilic conditions.

    Science.gov (United States)

    Cheng, Lei; Shi, Shengbao; Li, Qiang; Chen, Jianfa; Zhang, Hui; Lu, Yahai

    2014-01-01

    Although methanogenic degradation of hydrocarbons has become a well-known process, little is known about which crude oil tend to be degraded at different temperatures and how the microbial community is responded. In this study, we assessed the methanogenic crude oil degradation capacity of oily sludge microbes enriched from the Shengli oilfield under mesophilic and thermophilic conditions. The microbial communities were investigated by terminal restriction fragment length polymorphism (T-RFLP) analysis of 16S rRNA genes combined with cloning and sequencing. Enrichment incubation demonstrated the microbial oxidation of crude oil coupled to methane production at 35 and 55°C, which generated 3.7±0.3 and 2.8±0.3 mmol of methane per gram oil, respectively. Gas chromatography-mass spectrometry (GC-MS) analysis revealed that crude oil n-alkanes were obviously degraded, and high molecular weight n-alkanes were preferentially removed over relatively shorter-chain n-alkanes. Phylogenetic analysis revealed the concurrence of acetoclastic Methanosaeta and hydrogenotrophic methanogens but different methanogenic community structures under the two temperature conditions. Candidate divisions of JS1 and WWE 1, Proteobacteria (mainly consisting of Syntrophaceae, Desulfobacteraceae and Syntrophorhabdus) and Firmicutes (mainly consisting of Desulfotomaculum) were supposed to be involved with n-alkane degradation in the mesophilic conditions. By contrast, the different bacterial phylotypes affiliated with Caldisericales, "Shengli Cluster" and Synergistetes dominated the thermophilic consortium, which was most likely to be associated with thermophilic crude oil degradation. This study revealed that the oily sludge in Shengli oilfield harbors diverse uncultured microbes with great potential in methanogenic crude oil degradation over a wide temperature range, which extend our previous understanding of methanogenic degradation of crude oil alkanes.

  13. Progressive degradation of crude oil n-alkanes coupled to methane production under mesophilic and thermophilic conditions.

    Directory of Open Access Journals (Sweden)

    Lei Cheng

    Full Text Available Although methanogenic degradation of hydrocarbons has become a well-known process, little is known about which crude oil tend to be degraded at different temperatures and how the microbial community is responded. In this study, we assessed the methanogenic crude oil degradation capacity of oily sludge microbes enriched from the Shengli oilfield under mesophilic and thermophilic conditions. The microbial communities were investigated by terminal restriction fragment length polymorphism (T-RFLP analysis of 16S rRNA genes combined with cloning and sequencing. Enrichment incubation demonstrated the microbial oxidation of crude oil coupled to methane production at 35 and 55°C, which generated 3.7±0.3 and 2.8±0.3 mmol of methane per gram oil, respectively. Gas chromatography-mass spectrometry (GC-MS analysis revealed that crude oil n-alkanes were obviously degraded, and high molecular weight n-alkanes were preferentially removed over relatively shorter-chain n-alkanes. Phylogenetic analysis revealed the concurrence of acetoclastic Methanosaeta and hydrogenotrophic methanogens but different methanogenic community structures under the two temperature conditions. Candidate divisions of JS1 and WWE 1, Proteobacteria (mainly consisting of Syntrophaceae, Desulfobacteraceae and Syntrophorhabdus and Firmicutes (mainly consisting of Desulfotomaculum were supposed to be involved with n-alkane degradation in the mesophilic conditions. By contrast, the different bacterial phylotypes affiliated with Caldisericales, "Shengli Cluster" and Synergistetes dominated the thermophilic consortium, which was most likely to be associated with thermophilic crude oil degradation. This study revealed that the oily sludge in Shengli oilfield harbors diverse uncultured microbes with great potential in methanogenic crude oil degradation over a wide temperature range, which extend our previous understanding of methanogenic degradation of crude oil alkanes.

  14. Plasma fibrinogen degradation products in betel nut chewers - with and without oral submucous fibrosis.

    Science.gov (United States)

    Kiran, G; Muni Sekhar, Ms; Hunasgi, Santosh; Ahmed, Syed Afroz; Suri, Charu; Krishna, A

    2013-09-01

    Oral submucous fibrosis (OSMF) has a multifactorial etiology. Recent studies have shown that there is an increased level of fibrinogen degradation products (FDP) in plasma of OSMF patients suggesting its possible role in etiopathogenesis of OSMF. To detect the presence of FDP in the plasma of betel nut chewers with and without OSMF and in normal subjects without any habits, to correlate these levels with respect to the clinical and histological grading of OSMF and whether it can be used as a nonsurgical diagnostic aid in detection of suspected OSMF cases. Study comprised of 35 cases of betel nut chewers with OSMF, 10 patients with betel nut chewing habit but having apparently normal oral mucosa, and 10 normal patients without any habits. The patients were evaluated for plasma FDP levels. All the betel nut chewers with OSMF showed the presence of plasma FDP. However, controls and subjects with habit, but without OSMF did not show FDP in the plasma. Spearman's rank correlation was used to find the association between the clinical and histological grades and it was not statistically significant (P = 0.910) and the correlation being 0.020. Since only those patients with OSMF have showed the presence of FDP in plasma, we suggest that our test can be utilized as a nonsurgical diagnostic aid in suspected OSMF patients.

  15. Factors influencing the structure of terminal plasmin degradation products of human fibrinogen and fibrin.

    Science.gov (United States)

    Nieuwenhuizen, W; Vermond, A; Haverkate, F

    1981-02-27

    Experiments have been carried out with fibrinogen and with purified degradation products of fibrinogen and fibrin which demonstrate that the structure of D fragments obtained after prolonged plasmin digestion is influenced by several factors in the media. The previously described protective effect of calcium ions on the gamma-chain carboxy-terminals of fibrinogen against attack has been confirmed by working at high plasmin concentrations and/or in the presence of 2 M urea. Several compounds such as EDTA, EGTA, citrate and iminodiacetic acid appear to have a separate effect. In the absence of calcium ions these compounds appear to make the gamma-chain carboxy-terminal ends of the D and D-dimer fragments more susceptible to plasmin digestion. Finally, as demonstrated by experiments with purified D-E complexes from fibrinogen and with whole fibrinogen digests, the E moiety of the D-E complexes appears to be capable of protecting the D moiety against low plasmin concentrations also in the absence of calcium ions.

  16. Production of hemicellulose- and cellulose-degrading enzymes by various strains of Sclerotium rolfsii.

    Science.gov (United States)

    Sachslehner, A; Haltrich, D; Nidetzky, B; Kulbe, K D

    1997-01-01

    A number of wild-type isolates of Sclerotium rolfsii were screened for their capacity to produce lignocellulolytic enzymes when grown on a cellulose-based medium.S. rolfsii proved to be an efficient producer of hemicellulolytic enzymes under the conditions selected for this screening, although there was a great variability in enzyme activities formed by the different isolates. In addition to xylanase and mannanase, which were produced in remarkably high levels, a number of accessory enzymes, which are important for the complete degradation of substituted hemicelluloses and include a-arabinosidase, acetyl esterase, and a-galactosidase, are formed by S. rolfsii. Efficient production of xylanase and mannanase was achieved when cellulose-based media were used for growth. Under these conditions, enhanced levels of endoglucanase were formed as well. Formation of xylanase and mannanase could be more specifically induced when using xylan or mannan as growth substrates, although the enzyme activities thus obtained were significantly lower compared to cultivations on cellulose as main inducing substrate.

  17. Simultaneous cellulose degradation and electricity production by Enterobacter cloacae in a microbial fuel cell.

    Science.gov (United States)

    Rezaei, Farzaneh; Xing, Defeng; Wagner, Rachel; Regan, John M; Richard, Tom L; Logan, Bruce E

    2009-06-01

    Electricity can be directly generated by bacteria in microbial fuel cells (MFCs) from many different biodegradable substrates. When cellulose is used as the substrate, electricity generation requires a microbial community with both cellulolytic and exoelectrogenic activities. Cellulose degradation with electricity production by a pure culture has not been previously demonstrated without addition of an exogenous mediator. Using a specially designed U-tube MFC, we enriched a consortium of exoelectrogenic bacteria capable of using cellulose as the sole electron donor. After 19 dilution-to-extinction serial transfers of the consortium, 16S rRNA gene-based community analysis using denaturing gradient gel electrophoresis and band sequencing revealed that the dominant bacterium was Enterobacter cloacae. An isolate designated E. cloacae FR from the enrichment was found to be 100% identical to E. cloacae ATCC 13047(T) based on a partial 16S rRNA sequence. In polarization tests using the U-tube MFC and cellulose as a substrate, strain FR produced 4.9 +/- 0.01 mW/m(2), compared to 5.4 +/- 0.3 mW/m(2) for strain ATCC 13047(T). These results demonstrate for the first time that it is possible to generate electricity from cellulose using a single bacterial strain without exogenous mediators.

  18. Diagnostic implication of fibrin degradation products and D-dimer in aortic dissection

    Science.gov (United States)

    Dong, Jian; Duan, Xianli; Feng, Rui; Zhao, Zhiqing; Feng, Xiang; Lu, Qingsheng; Jing, Qing; Zhou, Jian; Bao, Junmin; Jing, Zaiping

    2017-03-01

    Fibrin degradation products (FDP) and D-dimer have been considered to be involved in many vascular diseases. In this study we aimed to explore the diagnostic implication of FDP and D-dimer in aortic dissection patients. 202 aortic dissection patients were collected as the case group, 150 patients with other cardiovascular diseases, including myocardial infarction (MI, n = 45), pulmonary infarction (n = 51) and abdominal aortic aneurysm (n = 54) were collected as non-dissection group, and 27 healthy people were in the blank control group. The FDP and D-dimer levels were detected with immune nephelometry. Logist regression analysis was performed to evaluate the influence of FDP and D-dimer for the aortic dissection patients. ROC curve was used to determine the diagnostic value of FDP and D-dimer. The FDP and D-dimer levels were significantly higher in aortic dissection patients than in non-dissection patients and the healthy controls. FDP and D-dimer were both the risk factors for patients with aortic dissection. From the ROC analysis, diagnostic value of FDP and D-dimer were not high to distinguish aortic dissection patients from the non-dissection patients. However FDP and D-dimer could be valuable diagnostic marker to differentiate aortic dissection patients and healthy controls with both AUC 0.863.

  19. Simultaneous Cellulose Degradation and Electricity Production by Enterobacter cloacae in a Microbial Fuel Cell▿

    Science.gov (United States)

    Rezaei, Farzaneh; Xing, Defeng; Wagner, Rachel; Regan, John M.; Richard, Tom L.; Logan, Bruce E.

    2009-01-01

    Electricity can be directly generated by bacteria in microbial fuel cells (MFCs) from many different biodegradable substrates. When cellulose is used as the substrate, electricity generation requires a microbial community with both cellulolytic and exoelectrogenic activities. Cellulose degradation with electricity production by a pure culture has not been previously demonstrated without addition of an exogenous mediator. Using a specially designed U-tube MFC, we enriched a consortium of exoelectrogenic bacteria capable of using cellulose as the sole electron donor. After 19 dilution-to-extinction serial transfers of the consortium, 16S rRNA gene-based community analysis using denaturing gradient gel electrophoresis and band sequencing revealed that the dominant bacterium was Enterobacter cloacae. An isolate designated E. cloacae FR from the enrichment was found to be 100% identical to E. cloacae ATCC 13047T based on a partial 16S rRNA sequence. In polarization tests using the U-tube MFC and cellulose as a substrate, strain FR produced 4.9 ± 0.01 mW/m2, compared to 5.4 ± 0.3 mW/m2 for strain ATCC 13047T. These results demonstrate for the first time that it is possible to generate electricity from cellulose using a single bacterial strain without exogenous mediators. PMID:19346362

  20. Artificial neural networks in analysis of indinavir and its degradation products retention.

    Science.gov (United States)

    Jancić-Stojanović, B; Ivanović, D; Malenović, A; Medenica, M

    2009-04-15

    Artificial neural networks (ANN) are biologically inspired computer programs designed to simulate the way in which the human brain processes the information. In the past few years, coupling of experimental design (ED) and ANN became useful tool in the method optimization. This paper presents the application of ED-ANN in analysis of chromatographic behavior of indinavir and its degradation products. According to preliminary study, full factorial design 2(4) was chosen to set input variables for network training. Experimental data (inputs) and results for retention factors from experiments (outputs) were used to train the ANN with aim to define correlation among variables. For networks training multi-layer perceptron (MLP) with back propagation (BP) algorithm was used. Network with the lowest root mean square (RMS) had 4-8-3 topology. Predicted data were in good agreement with experimental data (correlation was higher than 0.9713 for training set). Regression statistics confirmed good ability of trained network to predict compounds retention.

  1. Determination of the pesticide naptalam and its degradation products by positive and negative ion mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Ghassempour, A. [Dept. of Chemistry, Faculty of Science, Guilan Univ., Rasht (Iran); Arshadi, M.R. [Dept. of Chemistry, Sharif University of Technology, Tehran (Iran); Asghari, F.S. [Quality Control Laboratory, Zakaria Pharm. Co., Tabriz, (Iran)

    2001-01-01

    N-1-Naphthylphtalamic acid (naptalam) and its degradation products, 1-naphthylamine and N-(1-naphthyl) phthalimide were simultaneously determined in river water by two independent mass spectrometric (MS) methods. These were negative ion MS (NIMS) and programmable temperature vaporizer gas chromatography mass spectrometry (PTV-GC MS) with electron impact ionization (positive ions). Prior to the NIMS analysis, the samples were preconcentrated by solid phase extraction (SPE) of C{sub 18} membrane discs. The PTV-GC MS studies were performed without any preconcentration procedure. Selected ion monitoring (SIM) and internal standardization with naphthalene were applied in both methods. The limits of determination (LOD) of NIMS studies were 230, 270 and 260 ng L{sup -1} for naptalam, 1-naphthylamine and N-(1-naphthyl) phthalimide, respectively, with relative standard deviation (RSD) < 1% (n = 5) and of PTV-GC MS 17, 11 and 15 ng L{sup -1} (RSD < 0.7%, n = 5). The LOD, linearity, RSD and time required for these methods are far better than for HPLC analyses. (orig.)

  2. Mixed-mode sorption of hydroxylated atrazine degradation products to sell: A mechanism for bound residue

    Science.gov (United States)

    Lerch, R.N.; Thurman, E.M.; Kruger, E.L.

    1997-01-01

    This study tested the hypothesis that sorption of hydroxylated atrazine degradation products (HADPs: hydroxyatrazine, HA; deethylhydroxyatrazine, DEHA; and deisopropylhydroxyatrazine, DIHA) to soils occurs by mixed-mode binding resulting from two simultaneous mechanisms: (1) cation exchange and (2) hydrophobic interaction. The objective was to use liquid chromatography and soil extraction experiments to show that mixed-mode binding is the mechanism controlling HADP sorption to soils and is also a mechanism for bound residue. Overall, HADP binding to solid-phase extraction (SPE) sorbents occurred in the order: cation exchange >> octadecyl (C18) >> cyanopropyl. Binding to cation exchange SPE and to a high-performance liquid chromatograph octyl (C8) column showed evidence for mixed-mode binding. Comparison of soil extracted by 0.5 M KH2P04, pH 7.5, or 25% aqueous CH3CN showed that, for HA and DIHA, cation exchange was a more important binding mechanism to soils than hydrophobic interaction. Based on differences between several extractants, the extent of HADP mixed-mode binding to soil occurred in the following order: HA > DIHA > DEHA. Mixed-mode extraction recovered 42.8% of bound atrazine residues from aged soil, and 88% of this fraction was identified as HADPs. Thus, a significant portion of bound atrazine residues in soils is sorbed by the mixed-mode binding mechanisms.

  3. Part I: In-situ fluorometric quantification of microalgal neutral lipids. Part II: Thermal degradation behavior of investment casting polymer patterns

    Science.gov (United States)

    Zhao, Hongfang

    Research described in this dissertation covers two topics. Part-I is focused on in-situ determination of neutral lipid content of microalgae using a lipophilic fluorescent dye. The traditional Nile red stain-based method for detecting microalgal intracellular lipids is limited due to varying composition and thickness of rigid cell walls. In this study, the addition of dilute acid and heating of solution, were found to greatly enhance staining efficiency of Nile red for microalgal species evaluated. Oil-in-water (O/W) microemulsion stabilized by a non-ionic surfactant was employed as a pseudo-standard that mimics lipid-bearing microalgal cells suspended in water. The average neutral lipid contents determined were very close to the results obtained by traditional gravimetric method and solid phase extraction. Part II of the dissertation explores thermo-physico-chemical properties of polymeric pattern materials, including expanded polystyrene (EPS) foam, polyurethane foam, and epoxy stereolithography (SLA) patterns, that are used in investment casting. Density, elastic modulus, expansion coefficient, thermal degradation behavior, etc. were experimentally investigated for their effects on metal casting quality. The reduction in toxic hydrogen cyanide (HCN) generated during thermal decomposition of polyurethane pattern was achieved by increasing either oxidant level or residence time in heated zone. Thermal degradation kinetics of the pattern materials were examined with a thermogravimetric analysis and activation energies were determined by Kissinger and Flynn-Wall-Ozawa methods.

  4. Prototype of thermal degradation for radioactive wastes of low and intermediate level; Prototipo de degradacion termica para desechos radiactivos de nivel bajo e intermedio

    Energy Technology Data Exchange (ETDEWEB)

    Diaz A, L.V.; Pacheco S, J.O.; Pacheco P, M.; Monroy G, F.; Emeterio H, M. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: lauradiazarch@yahoo.com.mx

    2005-07-01

    At the present time, the scientific, academic, industrial and technological activities, generate great quantity of radioactive wastes of low and intermediate level (DRNBI). For to assure an appropriate final disposal of these, it is intended their treatment and vitrification by means of thermal plasma. This alternative offers multiple advantages in an only process: elevated energy density (105W/cm{sup 3}), high enthalpy (1400 kJ/mol), elevated chemical reactivity, quick quenching (106K/s) and operation temperatures of 4000 to 15000K; this allows the treatment of a great diversity of waste. Those reactors are compact and they work to atmospheric pressure and reduced thermal inertia. This technology allows to degrade DRNBI and to contain them in a vitreous matrix by means of a system made up of a reactor, canyon of plasma, of monitoring, of washing of gases and of control. Besides the design and general characteristics of the Prototype of Thermal Degradation of DRNBI, they are reported in this work the advances achieved in the selection of the ceramic material for the vitrification. Their characterization was carried out by means of SEM and XRD. With the preliminary results it can discern that the material but appropriate to be used as vitreous matrix is a ceramic clay. With the development of the proposed technology and the material for the vitreous matrix, it will be to treat DRNBI. (Author)

  5. Techniques for Mitigating Thermal Fatigue Degradation, Controlling Efficiency, and Extending Lifetime in a ZnO Thermoelectric Using Grain Size Gradient FGMs

    Science.gov (United States)

    Cramer, Corson L.; Li, Wenjie; Jin, Zhi-He; Wang, Jue; Ma, Kaka; Holland, Troy B.

    2018-01-01

    A functionally graded material (FGM) in terms of grain size gradation is fabricated using zinc oxide (ZnO) with spark plasma sintering and an additive manufacturing technique by diffusion bonding layers of material sintered at different temperatures to achieve a thermoelectric generator (TEG) material that can dissipate heat well and retain high energy conversion efficiency for longer-lasting and comparably efficient TEGs. This FGM is compared to a previously made FGM with continuous grain size gradation. Uniform and graded grain size conditions are modeled for thermoelectric output by using thermoelectric properties of the uniform grain size as well as the varying properties seen in the FGMs. The actual thermoelectric output of the samples is measured and compared to the simulations. The grain size has a large effect on the efficiency and efficiency range. The samples are thermally cycled with a fast heating rate to test the thermal stress robustness and degradation, and the resistance at the highest temperature is measured to indicate degradation from thermal stress. The measured efficiency after cycling shows that the FGMs survive longer lifetime than that with uniform small grains.

  6. Electron Barrier Formation at the Organic-Back Contact Interface is the First Step in Thermal Degradation of Polymer Solar Cells

    KAUST Repository

    Sachs-Quintana, I. T.

    2014-03-24

    Long-term stability of polymer solar cells is determined by many factors, one of which is thermal stability. Although many thermal stability studies occur far beyond the operating temperature of a solar cell which is almost always less than 65 °C, thermal degradation is studied at temperatures that the solar cell would encounter in real-world operating conditions. At these temperatures, movement of the polymer and fullerenes, along with adhesion of the polymer to the back contact, creates a barrier for electron extraction. The polymer barrier can be removed and the performance can be restored by peeling off the electrode and depositing a new one. X-ray photoelectron spectroscopy measurements reveal a larger amount of polymer adhered to electrodes peeled from aged devices than electrodes peeled from fresh devices. The degradation caused by hole-transporting polymer adhering to the electrode can be suppressed by using an inverted device where instead of electrons, holes are extracted at the back metal electrode. The problem can be ultimately eliminated by choosing a polymer with a high glass transition temperature. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Thermally-restorable optical degradation and the mechanism of current transport in Cu2S-CdS photovoltaic cells

    Science.gov (United States)

    Fahrenbruch, A. L.; Bube, R. H.

    1974-01-01

    The photovoltaic properties of single-crystal Cu2S-CdS heterojunctions have been investigated as a function of heat treatment by detailed measurements of the dependence of short-circuit current on photon energy, temperature, and the state of optical degradation or enhancement. A coherent picture is formulated for the relationship between enhancement and optical degradation, and their effect on the transport of short-circuit photoexcited current and dark, forward-bias current in the cell. Optical degradation in the Cu2S-CdS cell is shown to be closely identical to optical degradation of lifetime in a homogeneous CdS:Cd:Cu crystal, indicating that the CdS:Cu layer near the junction interface controls carrier transport in the cell. It is proposed that both the photoexcited short-circuit current and the dark, forward-bias current are controlled by a tunneling-recombination process through interface states.

  8. Heavy and Thermal Oil Recovery Production Mechanisms, SUPRI TR-127

    Energy Technology Data Exchange (ETDEWEB)

    Kovscek, Anthony R.; Brigham, William E.; Castanier, Louis M.

    2001-09-07

    The program spans a spectrum of topics and is divided into five categories: (i) multiphase flow and rock properties, (ii) hot fluid injection, (iii) primary heavy-oil production, (iv) reservoir definition, and (v) in-situ combustion.

  9. THE CHALLENGE OF PD PATIENTS: GLUCOSE AND GLUCOSE DEGRADATION PRODUCTS IN PD SOLUTION

    Directory of Open Access Journals (Sweden)

    Yong-Lim Kim

    2012-06-01

    Full Text Available The main osmotic agent found in the peritoneal dialysis (PD solution is glucose. It has been of a wide use for great crystalloid osmotic power at a low concentration, simple metabolism, and excellent safety. On the other hand, anywhere between 60 to 80% of the glucose in the PD solution is absorbed - a 100 to 300 mg of daily glucose absorption. Once into the systemic circulation, glucose can be a cause for metabolic complications including obesity. Indeed, the diabetiform change observed in the peritoneal membrane in the long-term PD patients is believed attributable to the high-concentration glucose in the PD solution. The glucose absorbed from peritoneal cavity raises the risk of ‘glucose toxicity’, leading to insulin resistance and beta cell failure. Clinical similarity can be found in postprandial hyperglycemia, which is known to be associated with oxidative stress, endothelial dysfunction, NF-κb, and inflammation, affecting myocardial blood flow. Moreover, it is a proven independent risk factor of coronary artery disease in patients with type 2 diabetes, particularly of female gender. Though speculative yet, glucose toxicity might explain a higher mortality of PD patients after the first year compared with those on hemodialysis (more so in female, advanced-age patients with diabetes. Also included in the picture are glucose degradation products (GDPs generated along the course of heat sterilization or storage of the PD solution. They have been shown to induce apoptosis of peritoneal mesothelial cells, renal tubular epithelial cells, and endothelial cells, while spurring production of TGF-β and VEGF and facilitating epithelial mesenchymal transition. GDPs provide a stronger reactivity than glucose in the formation of AGEs, a known cause for microvascular complications and arteriosclerosis. Unfortunately, clinical studies using a low-GDP PD solution have provided mixed results on the residual renal function, peritonitis, peritoneal

  10. Effects of Light on the Production and Degradation of Caffeine in Camellia sinensis L. Seedlings

    OpenAIRE

    Takeo, SUZUKI; George R., Waller; Faculty of Textile Science, Kyoto Kogei-Sen-i University; Department of Biochemistry, Oklahoma State University

    1985-01-01

    Light enhanced the growth of tea seedlings but the amount of caffeine produced in light was almost identical to that in the shade, indicating that more synthesis and/or less degradation of caffeine occur(s) in shaded seedlings. Administering [N^1_methyl-^Cl]-caffeine to tea shoot tips showed that light promotes the degradation of caffeine only slightly.

  11. Neutronic and thermal hydraulic analysis for production of fission molybdenum-99 at Pakistan Research Reactor-1

    Energy Technology Data Exchange (ETDEWEB)

    Mushtaq, A. [Isotope Production Division, Pakistan Institute of Nuclear Science and Technology, P.O. Nilore, Islamabad (Pakistan)], E-mail: mushtaqa@pinstech.org.pk; Iqbal, Massod; Bokhari, Ishtiaq Hussain; Mahmood, Tariq; Mahmood, Tayyab; Ahmad, Zahoor; Zaman, Qamar [Nuclear Engineering Division, Pakistan Institute of Nuclear Science and Technology, P.O. Nilore, Islamabad (Pakistan)

    2008-02-15

    Neutronic and thermal hydraulic analysis for the fission molybdenum-99 production at PARR-1 has been performed. Low enriched uranium foil (<20% {sup 235}U) will be used as target material. Annular target designed by ANL (USA) will be irradiated in PARR-1 for the production of 100 Ci of molybdenum-99 at the end of irradiation, which will be sufficient to prepare required {sup 99}Mo/{sup 99m}Tc generators at PINSTECH and its supply in the country. Neutronic and thermal hydraulic analysis were performed using various codes. Data shows that annular targets can be safely irradiated in PARR-1 for production of required amount of fission molybdenum-99.

  12. Steam contamination with degradation products of organic matters present in the feedwater of the Lanxess-Rubber cogeneration plant

    Energy Technology Data Exchange (ETDEWEB)

    Ertryckx, Roger [Laborelec, Linkebeek (Belgium); Poelemans, Nancy [Electrabel S.A. (Belgium)

    2012-07-01

    The commissioning of the steam turbine of a GDF Suez cogeneration plant was delayed due to steam purity issues. Following route causes were investigated and excluded poor degassing of the feed water, CO{sub 2} ingress in the demineralised water storage tank and thermal degradation in the boiler of leachables from ion exchange resins. The investigations revealed heavy pollution of the anion resins by organic matter. The steam purity could be restored by a post treatment of the demineralised water with reverse osmosis. The post-treatment was stopped once the guideline was adopted. (orig.)

  13. Environmental Fate of the Herbicide Fluazifop-P-butyl and Its Degradation Products in Two Loamy Agricultural Soils: A Combined Laboratory and Field Study

    DEFF Research Database (Denmark)

    Badawi, Nora; Rosenbom, Anette E.; Olsen, Preben

    2015-01-01

    experiments with soil from each field revealed a rapid degradation of FPB to FP. The degradation was almost exclusively microbial, and further biodegradation to TFMP occurred at a slower rate. Both degradation products were sorbed to the two soils to a small extent and were fairly persistent to degradation...... during the two-month incubation period. Together, the field and laboratory results from this study showed that the biodegradation of FPB in loamy soils gave rise to the production of two major degradation products that sorbed to a small extent. In this study, both degradation products leached to drainage......The herbicide fluazifop-P-butyl (FPB) is used against grasses in agricultural crops such as potato, oilseed rape and sugar beet. Limited information is available in Scientific literature on its environmental fate, therefore extensive monitoring at two agricultural test fields was combined...

  14. Heterogeneous photocatalysis of tris(2-chloroethyl) phosphate by UV/TiO2: Degradation products and impacts on bacterial proteome.

    Science.gov (United States)

    Ye, Jinshao; Liu, Juan; Li, Chongshu; Zhou, Pulin; Wu, Shuang; Ou, Huase

    2017-11-01

    The widespread, persistent and toxic organophosphorus esters (OPEs) have become one category of emerging environmental contaminants. Thus, it is in urgent need to develop a cost-effective and safe treatment technology for OPEs control. The current study is a comprehensive attempt to use UV/TiO 2 heterogeneous photocatalysis for the degradation of a water dissolved OPEs, tris(2-chloroethyl) phosphate (TCEP). A pseudo-first order degradation reaction with a k obs of 0.3167 min -1 was observed, while hydroxyl radical may be the dominating reactive oxidative species. As the reaction proceeded, TCEP was transformed to a series of hydroxylated and dechlorinated products. The degradation efficiency was significantly affected by pH value, natural organic matters and anions, implying that the complete mineralization of TCEP would be difficult to achieve in actual water treatment process. Based on the proteomics analysis regarding the metabolism reactions, pathways and networks, the significant activation of transmembrane transport and energy generation in Escherichia coli exposed to preliminary degrading products suggested that they can be transported and utilized through cellular metabolism. Furthermore, the descending trend of stress resistance exhibited that the toxicity of products was obviously weakened as the treatment proceeded. In conclusion, hydroxylation and dechlorination of TCEP with incomplete mineralization were likewise effective for its detoxification, indicating that UV/TiO 2 will be an alternative treatment method for OPEs control. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Thermal paint production: the techno-economic evaluation of muscovite as insulating additive.

    Directory of Open Access Journals (Sweden)

    Gabriela Fernandes Ribas

    2016-09-01

    Full Text Available Muscovite is known by its thermal and electrical insulating properties. Based on this, it was hypothesized that its addition on paints should increase the thermal resistance. The use of muscovite as mineral insulating is pointed out as advantageous due to its low cost compared to other materials used for this purpose, such as the ceramic microsphere. The use of a low cost material could open the access to the medium and low income families, implying two aspects: the life quality increase by thermal comfort and the increase of energy saving. Thus, this part of the population could open a new market to thermal paints. Aiming to contribute to this issue, this work evaluated the thermal insulation performance of commercial paints containing muscovite additions and determined the economic evaluation for its industrial production. The thermal paint was formulated by adding 10%, 20% and 40% of muscovite to the commercial paint. This was applied on steel reinforced mortar boards. Thermal insulation tests were carried out in bench scale using an adapted box. The economic evaluation of the industrial production of muscovite-based thermal paint was conducted, considering the Brazilian economic market in this activity. The results showed its ability as an insulating agent due to a reduction of 0.667 °C/mm board by the addition of 40% muscovite. The economic analysis also demonstrated the feasibility of the thermal paint industrial production. The payback is favorable to 5 years when compared to the Selic short-term lending rate, with 21.53% of internal rate return and a net present value of US$ 15,085.76.

  16. Phenomenology of the three-flavor PNJL model and thermal strange quark production

    Science.gov (United States)

    Tsai, Hung-Ming; Müller, Berndt

    2009-07-01

    We study the temperature dependence of the adjoint Polyakov loop and its implication for the momentum spectrum of gluons in the mean-field approximation. This allows us to calculate the contribution of the thermal (transverse) gluons to the thermodynamic pressure. As an application, we evaluate the rates for the strange quark pair-production processes q\\barq \\tos\\bars and gg \\tos\\bars as functions of temperature including thermal effects on quark deconfinement and chiral symmetry breaking.

  17. Test of Cable Products in Respect of Thermal and Dynamic Stability

    Directory of Open Access Journals (Sweden)

    M. A. Коrotkevich

    2010-01-01

    Full Text Available The paper considers conditions for selection of  power supply of the unit which is used for testing samples of cable products by thermal and dynamic stability currents. It has been shown that while conducting testing by thermal and dynamic stability currents at nominal cable voltage it is more justifiable to use a percussive energy accumulator, and in the case when the voltage is low an inductive energy accumulator is used.

  18. Thermally-dried immobilized kefir on casein as starter culture in dried whey cheese production.

    Science.gov (United States)

    Dimitrellou, D; Kourkoutas, Y; Koutinas, A A; Kanellaki, M

    2009-12-01

    The aim of the present study was to evaluate the use of thermally-dried immobilized kefir on casein as a starter culture for protein-enriched dried whey cheese. For comparison reasons, dried whey cheese with thermally-dried free kefir culture and with no starter culture were also produced. The effect of the nature of the culture, the ripening temperature and the ripening process on quality characteristics of the whey cheese was studied. The association of microbial groups during cheese maturation suggested repression of spoilage and protection from pathogens due to the thermally-dried kefir, as counts of coliforms, enterobacteria and staphylococci were significantly reduced in cheeses produced using thermally-dried kefir starter cultures. The effect of the starter culture on production of volatile compounds responsible for cheese flavor was also studied using the SPME GC/MS technique. Thermally-dried immobilized kefir starter culture resulted in an improved profile of aroma-related compounds. The preliminary sensory evaluation ascertained the soft, fine taste and the overall improved quality of cheese produced with the thermally-dried immobilized kefir. The potential of protein-based thermally-dried starter cultures in dairy products is finally highlighted and assessed.

  19. Visible light induced degradation of methyl orange using β-Ag0.333V2O5 nanorod catalysts by facile thermal decomposition method

    Directory of Open Access Journals (Sweden)

    R. Saravanan

    2015-09-01

    Full Text Available One dimensional nanorods of β-Ag0.333V2O5 have been synthesized by facile thermal decomposition method without using any additives. The prepared sample was characterized by different physical and chemical techniques such as XRD, FE-SEM, TEM, DRS and XPS. The photocatalytic activity of β-Ag0.333V2O5 catalyst was investigated by studying the degradation of methyl orange (MO in aqueous medium under visible light exposure. The result shows β-Ag0.333V2O5 exhibits outstanding photocatalytic activity under visible light illumination.

  20. Development and validation of an analytical method to determine Fipronil and its degradation products in soil samples.

    Science.gov (United States)

    Flores-Ramírez, R; Batres-Esquivel, L E; Díaz-Barriga Martínez, F; López-Acosta, I; Ortiz-Pérez, M D

    2012-10-01

    The aim of this study was to develop a methodology for identifying and quantifying Fipronil and its degradation products in soil by gas chromatography-electron capture detector previously extracted using a focused ultrasound probe. This methodology was obtaining a range of recovery between 85% and 120%, decreasing approximately solvent used time and cost, respect to other methodologies such as bath ultrasonic, solid-phase extraction, liquid-liquid extraction and soxhlet. The method was validated in fortified matrix, presented linearity in the range of 25-400 μg kg(-1), and limit of detection for Fipronil and their products desulfinyl, sulfide and sulfone was 14.7, 9.8, 8.9 and 10.7 μg kg(-1), respectively. This process was applied to samples of agricultural soils, where two degradation products desulfinyl and sulfone were found.

  1. New insight into monitoring degradation products during the TiO2-photocatalysis process by multivariate molecular spectroscopy.

    Science.gov (United States)

    Stets, Sandra; do Amaral, Bianca; Bach, Larissa; Nagata, Noemi; Peralta-Zamora, Patricio G

    2017-03-01

    This study focuses on the feasibility of a spectroscopic multivariate method for monitoring the concentration of phenol and its main degradation products during heterogeneous photocatalysis. Phenolic compounds were chosen as model to evaluate the degradation process due to their toxicity and persistence in the environment and also their well-known degradation pathway. The predictive capability of the multivariate method developed by partial least squares regression (PLSR) over the spectral range of 200-350 nm was satisfactory, allowing mean predicted errors below 5.0 % in the simultaneous determination of the target compounds using six latent variables and smoothing spectra. Suitable results were reported for the simultaneous determination of hydroquinone, resorcinol, pyrocatechol, and p-benzoquinone in accordance to the chromatographic method. Characteristics such as simplicity, low cost, and fast data acquisition are remarkable in this procedure, which makes it appropriate for this type of analytical control.

  2. Identification of critical points of thermal environment in broiler production

    Directory of Open Access Journals (Sweden)

    AG Menezes

    2010-03-01

    Full Text Available This paper describes an exploratory study carried out to determine critical control points and possible risks in hatcheries and broiler farms. The study was based in the identification of the potential hazards existing in broiler production, from the hatchery to the broiler farm, identifying critical control points and defining critical limits. The following rooms were analyzed in the hatchery: egg cold storage, pre-heating, incubator, and hatcher rooms. Two broiler houses were studied in two different farms. The following data were collected in the hatchery and broiler houses: temperature (ºC and relative humidity (%, air velocity (m s-1, ammonia levels, and light intensity (lx. In the broiler house study, a questionnaire using information of the Broiler Production Good Practices (BPGP manual was applied, and workers were interviewed. Risk analysis matrices were build to determine Critical Control Points (CCP. After data collection, Statistical Process Control (SPC was applied through the analysis of the Process Capacity Index, using the software program Minitab15®. Environmental temperature and relative humidity were the critical points identified in the hatchery and in both farms. The classes determined as critical control points in the broiler houses were poultry litter, feeding, drinking water, workers' hygiene and health, management and biosecurity, norms and legislation, facilities, and activity planning. It was concluded that CCP analysis, associated with SPC control tools and guidelines of good production practices, may contribute to improve quality control in poultry production.

  3. Non-thermal production of pure hydrogen from biomass: HYVOLUTION

    NARCIS (Netherlands)

    Claassen, P.A.M.; Vrije, de G.J.; Koukios, E.G.; Niel, van E.W.J.; Eroglu, I.; Modigell, M.; Friedl, A.; Wukovits, W.; Ahrer, W.

    2010-01-01

    The objectives and methodology of the EU-funded research project HYVOLUTION devoted to hydrogen production from biomass are reviewed. The main scientific objective of this project is the development of a novel two-stage bioprocess employing thermophilic and phototrophic bacteria, for the

  4. Characterization of deposits formed on diesel injectors in field test and from thermal oxidative degradation of n-hexadecane in a laboratory reactor

    Directory of Open Access Journals (Sweden)

    Venkataraman Ramya

    2008-12-01

    Full Text Available Abstract Solid deposits from commercially available high-pressure diesel injectors (HPDI were analyzed to study the solid deposition from diesel fuel during engine operation. The structural and chemical properties of injector deposits were compared to those formed from the thermal oxidative stressing of a diesel fuel range model compound, n-hexadecane at 160°C and 450 psi for 2.5 h in a flow reactor. Both deposits consist of polyaromatic compounds (PAH with oxygen moieties. The similarities in structure and composition of the injector deposits and n-hexadecane deposits suggest that laboratory experiments can simulate thermal oxidative degradation of diesel in commercial injectors. The formation of PAH from n-hexadecane showed that aromatization of straight chain alkanes and polycondensation of aromatic rings was possible at temperatures as low as 160°C in the presence of oxygen. A mechanism for an oxygen-assisted aromatization of cylcoalkanes is proposed.

  5. Improving the thermal efficiency of a jaggery production module using a fire-tube heat exchanger.

    Science.gov (United States)

    La Madrid, Raul; Orbegoso, Elder Mendoza; Saavedra, Rafael; Marcelo, Daniel

    2017-12-15

    Jaggery is a product obtained after heating and evaporation processes have been applied to sugar cane juice via the addition of thermal energy, followed by the crystallisation process through mechanical agitation. At present, jaggery production uses furnaces and pans that are designed empirically based on trial and error procedures, which results in low ranges of thermal efficiency operation. To rectify these deficiencies, this study proposes the use of fire-tube pans to increase heat transfer from the flue gases to the sugar cane juice. With the aim of increasing the thermal efficiency of a jaggery installation, a computational fluid dynamic (CFD)-based model was used as a numerical tool to design a fire-tube pan that would replace the existing finned flat pan. For this purpose, the original configuration of the jaggery furnace was simulated via a pre-validated CFD model in order to calculate its current thermal performance. Then, the newly-designed fire-tube pan was virtually replaced in the jaggery furnace with the aim of numerically estimating the thermal performance at the same operating conditions. A comparison of both simulations highlighted the growth of the heat transfer rate at around 105% in the heating/evaporation processes when the fire-tube pan replaced the original finned flat pan. This enhancement impacted the jaggery production installation, whereby the thermal efficiency of the installation increased from 31.4% to 42.8%. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. High resolution mass spectrometry in the identification of transformation products and metabolites from β-lactam antibiotics in thermally treated milk.

    Science.gov (United States)

    Junza, A; Montané, A; Barbosa, J; Minguillón, C; Barrón, D

    2014-11-14

    Antibiotics such as β-lactam derivatives (penicillins and cephalosporins) are frequently used in veterinary medicine. The presence of these antibiotics together with their metabolites and/or products produced in subsequent treatments at which milk is submitted (sterilization, pasteurization), may be responsible for bacterial resistance, allergy and/or toxicity on sensitive individuals. In this study, liquid chromatography coupled with high resolution mass spectrometry (LC-HRMS) is used to identify transformation products (TPs) from four β-lactam antibiotics (amoxicillin (AMOX), cephapirin (PIR), ceftiofur (TIO) and penicillin G (PENG)) in thermally treated cow milk. In addition, milk from cows medicated with PENG has also been analogously treated and studied. The detected TPs come mainly from hydrolysis and decarboxylation reactions. Products more strongly degraded respect to parent compounds (of lower molecular weight) were obtained after treating milk at higher temperatures. Products identified in milk from cows medicated with PENG have been classified as TPs when coming from chemical/thermal degradation, and metabolites when resulting from the biological drug metabolism. While TPs are the result of hydrolysis and decarboxylation processes, as already indicated, an enzymatic conjugation with amino acids is suggested to be involved in the formation of metabolites. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Environmental Fate of the Herbicide Fluazifop-P-butyl and Its Degradation Products in Two Loamy Agricultural Soils: A Combined Laboratory and Field Study.

    Science.gov (United States)

    Badawi, Nora; Rosenbom, Annette E; Olsen, Preben; Sørensen, Sebastian R

    2015-08-04

    The herbicide fluazifop-P-butyl (FPB) is used against grasses in agricultural crops such as potato, oilseed rape, and sugar beet. Limited information is available in scientific literature on its environmental fate, therefore extensive monitoring at two agricultural test fields was combined with laboratory studies to determine leaching and the underlying degradation and sorption processes. Water samples from drains, suction cups, and groundwater wells showed leaching of the degradation products fluazifop-P (FP) and 2-hydroxy-5-trifluoromethyl-pyridin (TFMP) following FPB treatment. Laboratory experiments with soil from each field revealed a rapid degradation of FPB to FP. The degradation was almost exclusively microbial, and further biodegradation to TFMP occurred at a slower rate. Both degradation products were sorbed to the two soils to a small extent and were fairly persistent to degradation during the two-month incubation period. Together, the field and laboratory results from this study showed that the biodegradation of FPB in loamy soils gave rise to the production of two major degradation products that sorbed to a small extent. In this study, both degradation products leached to drainage and groundwater during precipitation. It is therefore recommended that these degradation products be included in programs monitoring water quality in areas with FPB use.

  8. Determination of the concentration profile and homogeneity of antioxidants and degradation products in a cross-linked polyethylene type A (PEXa) pipe

    DEFF Research Database (Denmark)

    Denberg, Martin; Mosbæk, Hans; Hassager, Ole

    2009-01-01

    A solvent extraction technique has been developed to determine the concentration profile of two antioxidants and five degradation products of antioxidants in cross-linked polyethylene (PEX) materials. Irganox (R) 1076 and two degradation products in a PEX pipe type A (PEXa) were detected after...

  9. In Vitro Evaluation the Influence of Glass-Ceramic Degradation Products on Osteoblast Cells.

    Directory of Open Access Journals (Sweden)

    Israa K. Sabree

    2016-03-01

    Full Text Available Regenerative medicine focuses on using biomaterials as three-dimensional (3D porous scaffolds, specifically designed to mimic the nature of host tissue and hence to promote cell growth and tissue regeneration. 3D bioactive glass-ceramic scaffolds are one of the most frequently studied types of scaffolds for bone tissue engineering because of their excellent bioactivity and potential for stimulating osteogenesis and angiogenesis. For such purposes, porous 3D 70%SiO2-30%CaO bioactive glass-ceramic scaffolds with three different pore sizes and identical porosity are used in present study to investigate In vitro, the effect of pore size on the degradation rate of scaffold which is achieved through examining changes in the composition of the immersion solution(SBF, simulated body fluid, and to investigate the action of released ions from the bioactive glass-ceramic scaffold during soaking process on osteoblast cells The results confirmed that all three scaffolds behaved in a similar manner and the ions release from the three scaffolds were of comparable concentration, which may be attributable to the identical porosity for all the scaffolds in addition to the using static immersion which delays ions diffusion. The pH of culture media increased from 7.6 to 8.2 after one day soaking. The optical microscopy images demonstrated that high ion concentration (Si, Ca, P in the culture medium could have a negative effect on the cells and induce cell death, while low concentration of ionic dissolution products induces osteoblast proliferation in dilute culture medium.

  10. Evaluation of Plasma Fibrinogen Degradation Products and Total Serum Protein Concentration in Oral Submucous Fibrosis

    Science.gov (United States)

    B.N.V.S., Satish; B., Maharudrappa; K.M., Prashant; Hugar, Deepa; Allad, Umesh; Prabhu, Prasanth S.

    2014-01-01

    Background: Oral submucous fibrosis (OSMF) is a potentially malignant disorder with a multifactorial etiology. Malnutrition is a major problem for the inhabitants of most countries where OSMF is prevalent. Recently, a new direction in the etiopathogenesis was provided by the identification of fibrinogen degradation products (FDP) in the plasma of OSMF patients. Aims and Objectives: To assess the role of FDP in the etiology of OSMF and to correlate with the nutritional status by evaluating the total serum protein level. The study also determines to evaluate the correlation between the levels of plasma FDP with respect to the staging and grading of OSMF. Correlation between the levels of Total Serum Protein (TSP) with respect to the staging and grading of OSMF was also evaluated. Materials and Methods: The study included 30 cases clinically and histopathologically diagnosed as oral submucous fibrosis. The FDP levels were assessed using both qualitative and semi quantitative method as supplied by ‘Tulip Diagnostics (P) Ltd. Total Serum Protein (TSP) estimation was done by Biuret method using Liquixx Protein kit by Erba, Manheim. Results: The study indicates that in qualitative assessment of FDP only 14 subjects showed the presence of FDP levels>200ng/ml. In semiquantitative assessment there is no significant association between varying clinical stages and histopathological grades and FDP levels. Total serum Protein level showed a marginal increase in all subjects. The study revealed a positive correlation between FDP and TSP in all OSMF subjects. Conclusion: A larger sample size which would be a better representation of the population and the use of different methods which have higher sensitivities and specificities to evaluate FDP level and detailed fractional analysis of protein along with immunoglobulin profiling would facilitate in attaining more conclusive results. PMID:24995245

  11. Synthesis and Thermal Degradation Kinetics of Co(II, Ni(II, Cd(II, Zn(II, Pd(II, Rh(III and Ru(III Complexes with Methylquinolino[3,2-b]benzodiazepine

    Directory of Open Access Journals (Sweden)

    Bennehalli Basavaraju

    2007-01-01

    Full Text Available A series of new complexes formed by the interaction of a new ligand Methylquinolino[3,2-b]benzodiazepine (L with various transition metal ions have been isolated and characterized by elemental analysis and electronic, IR, magnetic moment and conductivity measurements. Thermogravimetric (TG studies of the complexes have been performed in order to establish the mode of their thermal degradation. The thermal degradation was found to proceed in two steps. The kinetics and thermodynamic parameters were computed from the thermal decomposition data.

  12. The impact of low-temperature seasonal aquifer thermal energy storage (SATES) systems on chlorinated solvent contaminated groundwater: Modeling of spreading and degradat