WorldWideScience

Sample records for theory manuals part

  1. SEACAS Theory Manuals: Part II. Nonlinear Continuum Mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Attaway, S.W.; Laursen, T.A.; Zadoks, R.I.

    1998-09-01

    This report summarizes the key continuum mechanics concepts required for the systematic prescription and numerical solution of finite deformation solid mechanics problems. Topics surveyed include measures of deformation appropriate for media undergoing large deformations, stress measures appropriate for such problems, balance laws and their role in nonlinear continuum mechanics, the role of frame indifference in description of large deformation response, and the extension of these theories to encompass two dimensional idealizations, structural idealizations, and rigid body behavior. There are three companion reports that describe the problem formulation, constitutive modeling, and finite element technology for nonlinear continuum mechanics systems.

  2. Salinas : theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2004-08-01

    This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

  3. CTF Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Avramova, Maria N. [Pennsylvania State Univ., University Park, PA (United States); Salko, Robert K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-05-25

    Coolant-Boiling in Rod Arrays|Two Fluids (COBRA-TF) is a thermal/ hydraulic (T/H) simulation code designed for light water reactor (LWR) vessel analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of 9 conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and had been used and modified by several institutions over the last few decades. COBRA-TF also found use at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG) and has been improved, updated, and subsequently re-branded as CTF. As part of the improvement process, it was necessary to generate sufficient documentation for the open-source code which had lacked such material upon being adopted by RDFMG. This document serves mainly as a theory manual for CTF, detailing the many two-phase heat transfer, drag, and important accident scenario models contained in the code as well as the numerical solution process utilized. Coding of the models is also discussed, all with consideration for updates that have been made when transitioning from COBRA-TF to CTF. Further documentation outside of this manual is also available at RDFMG which focus on code input deck generation and source code global variable and module listings.

  4. RELAP-7 Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Berry, Ray Alden [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zou, Ling [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Peterson, John William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Martineau, Richard Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kadioglu, Samet Yucel [Idaho National Lab. (INL), Idaho Falls, ID (United States); Andrs, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    This document summarizes the physical models and mathematical formulations used in the RELAP-7 code. In summary, the MOOSE based RELAP-7 code development is an ongoing effort. The MOOSE framework enables rapid development of the RELAP-7 code. The developmental efforts and results demonstrate that the RELAP-7 project is on a path to success. This theory manual documents the main features implemented into the RELAP-7 code. Because the code is an ongoing development effort, this RELAP-7 Theory Manual will evolve with periodic updates to keep it current with the state of the development, implementation, and model additions/revisions.

  5. Salinas : theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  6. SAM Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Rui [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-01

    The System Analysis Module (SAM) is an advanced and modern system analysis tool being developed at Argonne National Laboratory under the U.S. DOE Office of Nuclear Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM development aims for advances in physical modeling, numerical methods, and software engineering to enhance its user experience and usability for reactor transient analyses. To facilitate the code development, SAM utilizes an object-oriented application framework (MOOSE), and its underlying meshing and finite-element library (libMesh) and linear and non-linear solvers (PETSc), to leverage modern advanced software environments and numerical methods. SAM focuses on modeling advanced reactor concepts such as SFRs (sodium fast reactors), LFRs (lead-cooled fast reactors), and FHRs (fluoride-salt-cooled high temperature reactors) or MSRs (molten salt reactors). These advanced concepts are distinguished from light-water reactors in their use of single-phase, low-pressure, high-temperature, and low Prandtl number (sodium and lead) coolants. As a new code development, the initial effort has been focused on modeling and simulation capabilities of heat transfer and single-phase fluid dynamics responses in Sodium-cooled Fast Reactor (SFR) systems. The system-level simulation capabilities of fluid flow and heat transfer in general engineering systems and typical SFRs have been verified and validated. This document provides the theoretical and technical basis of the code to help users understand the underlying physical models (such as governing equations, closure models, and component models), system modeling approaches, numerical discretization and solution methods, and the overall capabilities in SAM. As the code is still under ongoing development, this SAM Theory Manual will be updated periodically to keep it consistent with the state of the development.

  7. Sierra Structural Dynamics Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Garth M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-19

    Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Sierra/SD. For a more detailed description of how to use Sierra/SD , we refer the reader to Sierra/SD, User's Notes . Many of the constructs in Sierra/SD are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Sierra/SD are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature. This page intentionally left blank.

  8. AeroDyn Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Moriarty, P. J.; Hansen, A. C.

    2005-01-01

    AeroDyn is a set of routines used in conjunction with an aeroelastic simulation code to predict the aerodynamics of horizontal axis wind turbines. These subroutines provide several different models whose theoretical bases are described in this manual. AeroDyn contains two models for calculating the effect of wind turbine wakes: the blade element momentum theory and the generalized dynamic-wake theory. Blade element momentum theory is the classical standard used by many wind turbine designers and generalized dynamic wake theory is a more recent model useful for modeling skewed and unsteady wake dynamics. When using the blade element momentum theory, various corrections are available for the user, such as incorporating the aerodynamic effects of tip losses, hub losses, and skewed wakes. With the generalized dynamic wake, all of these effects are automatically included. Both of these methods are used to calculate the axial induced velocities from the wake in the rotor plane. The user also has the option of calculating the rotational induced velocity. In addition, AeroDyn contains an important model for dynamic stall based on the semi-empirical Beddoes-Leishman model. This model is particularly important for yawed wind turbines. Another aerodynamic model in AeroDyn is a tower shadow model based on potential flow around a cylinder and an expanding wake. Finally, AeroDyn has the ability to read several different formats of wind input, including single-point hub-height wind files or multiple-point turbulent winds.

  9. Single-session manualized ego state therapy (EST) for combat stress injury, PTSD, and ASD, part 1: the theory.

    Science.gov (United States)

    Barabasz, Arreed F; Barabasz, Marianne; Watkins, John G

    2011-01-01

    Ego state therapy (EST) evolved from a psychodynamic understanding of personality as a product of an individual's ego states to a conceptualization of how ego-energized and object-energized elements are bound together to cope with a traumatic event. Neurobiological studies now substantiate Watkins's war neuroses conceptualizations. Because of their severity, trauma memories are encoded in the subcortical-subconscious brain regions that are accessed by the single-session manualized EST procedure but not by the popular cognitive-behavioral management therapies. The imprint of the trauma is not accessible or resolvable by such top-down verbal understanding or reframing; EST is a bottom-up therapy. Abreactive hypnosis facilitates ego state expression at physiologically and psychologically intense levels sufficient to activate subcortical processes to release affect in the presence of the therapist, who adds ego strength to the patient. This is followed by interpretation and reintegration. The result is a reconstructed personality that is adaptive and resilient.

  10. PEBBLES Operation and Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Joshua J. Cogliati

    2010-09-01

    The PEBBLES manual describes the PEBBLES code. The PEBBLES code is a computer program designed to simulation the motion, packing and vibration of spheres that undergo various mechanical forces including gravitation, Hooke’s law force and various friction forces. The frictional forces include true static friction that allows non-zero angles of repose. Each pebble is individually simulated using the distinct element method.

  11. PEBBLES Operation and Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Joshua J. Cogliati

    2011-02-01

    The PEBBLES manual describes the PEBBLES code. The PEBBLES code is a computer program designed to simulation the motion, packing and vibration of spheres that undergo various mechanical forces including gravitation, Hooke’s law force and various friction forces. The frictional forces include true static friction that allows non-zero angles of repose. Each pebble is individually simulated using the distinct element method.

  12. Sierra/SM theory manual.

    Energy Technology Data Exchange (ETDEWEB)

    Crane, Nathan Karl

    2013-07-01

    Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilites come closer to production level.

  13. Salinas. Theory Manual Version 2.8

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Garth M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walsh, Timothy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bhardwaj, Manoj K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2009-02-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, Users Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  14. Training manual for precision hand deburring, Part 2

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1980-12-01

    Part 2 is presented of a 4-part training manual to be used by machinist trainees, production workers, and others removing burrs from precision miniature parts. The manuals are written to be self-teaching and are intended to be used with two hours of training each day along with another six hours of bench work in deburring.

  15. Training manual for precision hand deburring, Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1980-05-01

    Part 1 is presented of 4 parts of a training manual to be used by machinist trainees, production workers, and others removing burrs from precision miniature parts. The manuals are written to be self-teaching and are intended to be used with two hours of training each day and are intended to be used with two hours of training each day along with another six hours of bench work in deburring.

  16. Training manual for precision hand deburring, Part 3

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.

    1981-03-01

    This publication is Part 3 of a 4 part training manual to be used by machinist trainees, production workers, and others removing burrs from precision miniature parts. The manuals are written to be self-teaching and are intended to be used with two hours of training each day along with six additional hours of bench work in deburring. This part describes mounted stones, scrapers, hand stones, abrasive filled rubber and cotton tools, abrasive paper products, felt bobs and lapping compounds, mandrels and arbors, miscellaneous tools, personal techniques for assuring quality, cleaning parts, and deburring gears and plastic parts.

  17. The Russia Corporate Governance Manual : Part I. Corporate Governance Introduced

    OpenAIRE

    International Finance Corporation; U.S. Department of Commerce

    2004-01-01

    The Russia corporate governance manual has been divided into and is published in six parts: (i) corporate governance introduced; (ii) good board practices; (iii) shareholder rights; (iv) information disclosure and transparency; (v) special focus section; and (vi) annexes model corporate governance documents. The first four parts contain chapters that focus on core corporate governance issu...

  18. Urban Watershed Forestry Manual Part 3: Urban Tree Planting Guide

    Science.gov (United States)

    Karen Cappiella; Tom Schueler; Tiffany Wright; Jennifer Tomlinson

    2006-01-01

    This is the third in a three-manual series on using trees to protect and restore urban watersheds. A brief description of each part follows. Part 3. Urban Tree Planting Guide provides detailed guidance on urban tree planting that is applicable at both the development site and the watershed scales. Topics covered include site assessment, planting design, site...

  19. MPACT Theory Manual, Version 2.2.0

    Energy Technology Data Exchange (ETDEWEB)

    Downar, Thomas [Univ. of Michigan, Ann Arbor, MI (United States); Collins, Benjamin S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gehin, Jess C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Godfrey, Andrew T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jabaay, Daniel [Univ. of Michigan, Ann Arbor, MI (United States); Kelley, Blake W. [Univ. of Michigan, Ann Arbor, MI (United States); Clarno, Kevin T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kim, Kang [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kochunas, Brendan [Univ. of Michigan, Ann Arbor, MI (United States); Larsen, Edward W. [Univ. of Michigan, Ann Arbor, MI (United States); Liu, Yuxuan [Univ. of Michigan, Ann Arbor, MI (United States); Liu, Zhouyu [Univ. of Michigan, Ann Arbor, MI (United States); Martin, William R. [Univ. of Michigan, Ann Arbor, MI (United States); Palmtag, Scott [Core Physics, Inc., Cary, NC (United States); Rose, Michael [Univ. of Michigan, Ann Arbor, MI (United States); Saller, Thomas [Univ. of Michigan, Ann Arbor, MI (United States); Stimpson, Shane [Univ. of Michigan, Ann Arbor, MI (United States); Trahan, Travis [Univ. of Michigan, Ann Arbor, MI (United States); Wang, J. W. [Univ. of Michigan, Ann Arbor, MI (United States); Wieselquist, William A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Young, Mitchell [Univ. of Michigan, Ann Arbor, MI (United States); Zhu, Ang [Univ. of Michigan, Ann Arbor, MI (United States)

    2016-06-09

    This theory manual describes the three-dimensional (3-D) whole-core, pin-resolved transport calculation methodology employed in the MPACT code. To provide sub-pin level power distributions with sufficient accuracy, MPACT employs the method of characteristics (MOC) solutions in the framework of a 3-D coarse mesh finite difference (CMFD) formulation. MPACT provides a 3D MOC solution, but also a 2D/1D solution in which the 2D planar solution is provided by MOC and the axial coupling is resolved by one-dimensional (1-D) lower order (diffusion or P3) solutions. In Chapter 2 of the manual, the MOC methodology is described for calculating the regional angular and scalar fluxes from the Boltzmann transport equation. In Chapter 3, the 2D/1D methodology is described, together with the description of the CMFD iteration process involving dynamic homogenization and solution of the multigroup CMFD linear system. A description of the MPACT depletion algorithm is given in Chapter 4, followed by a discussion of the subgroup and ESSM resonance processing methods in Chapter 5. The final Chapter 6 describes a simplified thermal hydraulics model in MPACT.

  20. Navigating the grounded theory terrain. Part 1.

    Science.gov (United States)

    Hunter, Andrew; Murphy, Kathy; Grealish, Annmarie; Casey, Dympna; Keady, John

    2011-01-01

    The decision to use grounded theory is not an easy one and this article aims to illustrate and explore the methodological complexity and decision-making process. It explores the decision making of one researcher in the first two years of a grounded theory PhD study looking at the psychosocial training needs of nurses and healthcare assistants working with people with dementia in residential care. It aims to map out three different approaches to grounded theory: classic, Straussian and constructivist. In nursing research, grounded theory is often referred to but it is not always well understood. This confusion is due in part to the history of grounded theory methodology, which is one of development and divergent approaches. Common elements across grounded theory approaches are briefly outlined, along with the key differences of the divergent approaches. Methodological literature pertaining to the three chosen grounded theory approaches is considered and presented to illustrate the options and support the choice made. The process of deciding on classical grounded theory as the version best suited to this research is presented. The methodological and personal factors that directed the decision are outlined. The relative strengths of Straussian and constructivist grounded theories are reviewed. All three grounded theory approaches considered offer the researcher a structured, rigorous methodology, but researchers need to understand their choices and make those choices based on a range of methodological and personal factors. In the second article, the final methodological decision will be outlined and its research application described.

  1. BOUNDED RATIONALITY: AN ANALYSIS OF TEACHING MANUALS OF MANAGEMENT GENERAL THEORY

    Directory of Open Access Journals (Sweden)

    Daniela Teixeira Dias

    2016-08-01

    Full Text Available The objective of this article was to analyze how the concept of bounded rationality has been treated in the educational manuals of General Theory of Management, with the objective to analyze its quality, in terms of quality and complexity. Therefore, three educational manuals provided by the Central Library of the Alfa Federal University were used: “General Theory of Administration” authored by Motta and Vasconcelos (Manual A; “Introduction to Management” by Chiavenato (Manual B, and “Management: Theory and Processes” by Caravantes, Caravantes, and Kloeckener (Manual C. These were observed from the content analysis in four dimensions defined a priori: delimitation of the approach and quality of the references; historical-concrete dimension; relationship dimension; and theoretical dimension. The results showed that all manuals presented considerations about the bounded rationality assumption and made reference to Simon and Barnard, although they have not discussed their work and their contribution more widely. Manual A was the most complete in the axes analysis herein. Manual B turned to a summarized and synthetic theoretical discussion. Whereas C Manual defined and conceptualized bounded rationality and was the only one to describe the types of rationality presented by Simon.

  2. JacketSE: An Offshore Wind Turbine Jacket Sizing Tool; Theory Manual and Sample Usage with Preliminary Validation

    Energy Technology Data Exchange (ETDEWEB)

    Damiani, Rick [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-08

    This manual summarizes the theory and preliminary verifications of the JacketSE module, which is an offshore jacket sizing tool that is part of the Wind-Plant Integrated System Design & Engineering Model toolbox. JacketSE is based on a finite-element formulation and on user-prescribed inputs and design standards' criteria (constraints). The physics are highly simplified, with a primary focus on satisfying ultimate limit states and modal performance requirements. Preliminary validation work included comparing industry data and verification against ANSYS, a commercial finite-element analysis package. The results are encouraging, and future improvements to the code are recommended in this manual.

  3. Seismic retrofitting manual for highway structures. Part 2, Retaining structures, slopes, tunnels, culverts, and roadways

    Science.gov (United States)

    2004-08-01

    This report is the second of a two-part publication entitled "Seismic Retrofitting Manual for Highway Structures". Part 2 includes new procedures for determining the seismic vulnerability of other important highway system structures, namely, retainin...

  4. Camellia v1.0 Manual: Part I

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Nathan V. [Argonne National Lab. (ANL), Argonne, IL (United States). Argonne Leadership Computing Facility

    2016-09-28

    Camellia began as an effort to simplify implementation of efficient solvers for the discontinuous Petrov-Galerkin (DPG) finite element methodology of Demkowicz and Gopalakrishnan. Since then, the feature set has expanded, to allow implementation of traditional continuous Galerkin methods, as well as discontinuous Galerkin (DG) methods, hybridizable DG (HDG) methods, first-order-system least squares (FOSLS), and the primal DPG method. This manual serves as an introduction to using Camellia. We begin, in Section 1.1, by describing some of the core features of Camellia. In Section 1.2 we provide an outline of the manual as a whole.

  5. 16 CFR Appendix A2 to Part 305 - Refrigerators and Refrigerators-Freezers With Manual Defrost

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Refrigerators and Refrigerators-Freezers With Manual Defrost A2 Appendix A2 to Part 305 Commercial Practices FEDERAL TRADE COMMISSION... Refrigerators-Freezers With Manual Defrost Range Information Manufacturer's Rated Total Refrigerated Volume in...

  6. Urban Watershed Forestry Manual Part 1: Methods for Increasing Forest Cover in a Watershed

    Science.gov (United States)

    Karen Cappiella; Tom Schueler; Tiffany Wright

    2005-01-01

    This manual is one in a three-part series on using trees to protect and restore urban watersheds. A brief description of each part follows. Part 1: Methods for Increasing Forest Cover in a Watershed introduces the emerging topic of urban watershed forestry. This part also presents new methods for the watershed planner or forester to systematically measure watershed...

  7. The effectiveness of "theory of planned behavior" in training the correct principles of manual material handling

    Directory of Open Access Journals (Sweden)

    Maryam Jafari Kuchi

    2016-01-01

    Full Text Available Aims: In this study, which was done in Persian Gulf Mining and Metal Industries Special Economic Zone, the efficiency of "theory of planned behavior" in training the correct principles of manual material handling was investigated. Materials and Methods: To perform this semi-experimental study, based on the theory of planned behavior and method of manual material handling required questionnaires were prepared. After preliminary studies and determining the reliability and validity of questionnaires, the appropriate study population was selected from the workers, and the questionnaires were filled up through interviews. Results: The results showed that subjective norms (safety factor = 0.51, P < 0.001 are the predictors of behavior intention (performing manual material handling correctly and behavioral control, as well as behavioral intention, are appropriate predictors for behavior change. Conclusion: This study confirms the efficiency of the theory of planned behavior in modifying the workers′ manual material handling behavior. But since all constructs of the theory of planned behavior could not predict the behavioral intention for correct manual material handling, it can be concluded that for changing the behavioral intention, other theories also should be taken into consideration.

  8. Urban Watershed Forestry Manual Part 2 Conserving and Planting Trees at Development Sites

    Science.gov (United States)

    Karen Cappiella; Tom Schueler; Tiffany Wright

    2006-01-01

    This manual is the second in a three-part series on using trees to protect and restore urban watersheds. A brief description of each part follows. Part 2. Conserving and Planting Trees at Development Sites presents specific ways to enable developers, engineers, or landscape architects to incorporate more trees into a development site. The proposed approach focuses...

  9. A computational system for aerodynamic design and analysis of supersonic aircraft. Part 2: User's manual

    Science.gov (United States)

    Middleton, W. D.; Lundry, J. L.; Coleman, R. G.

    1976-01-01

    An integrated system of computer programs was developed for the design and analysis of supersonic configurations. The system uses linearized theory methods for the calculation of surface pressures and supersonic area rule concepts in combination with linearized theory for calculation of aerodynamic force coefficients. Interactive graphics are optional at the user's request. This user's manual contains a description of the system, an explanation of its usage, the input definition, and example output.

  10. 18 CFR 410.1 - Basin regulations-Water Code and Administrative Manual-Part III Water Quality Regulations.

    Science.gov (United States)

    2010-04-01

    ... Code and Administrative Manual-Part III Water Quality Regulations. 410.1 Section 410.1 Conservation of... CODE AND ADMINISTRATIVE MANUAL-PART III WATER QUALITY REGULATIONS § 410.1 Basin regulations—Water Code and Administrative Manual—Part III Water Quality Regulations. (a) The Water Code of the Delaware River...

  11. The Universal Arrow of Time III-IV:(Part III) Nonquantum gravitation theory (Part IV) Quantum gravitation theory

    OpenAIRE

    Kupervasser, Oleg

    2011-01-01

    The paper consists of the two independent papers - the first one about Nonquantum Gravitation theory, the second one about Quantum Gravitation theory (Part III: Nonquantum Gravitation theory) The first paper is dealing with the analysis of general relativity theory (theory of gravitation) from the point of view of thermodynamic time arrow. Within this framework "informational paradox" for black holes and "paradox with the grandfather" for time travel "wormholes" are resolved. (Part IV: Quantu...

  12. Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

    Science.gov (United States)

    Ebeling, Charles E.

    1996-01-01

    This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

  13. Navigating the grounded theory terrain. Part 2.

    Science.gov (United States)

    Hunter, Andrew; Murphy, Kathy; Grealish, Annmarie; Casey, Dympna; Keady, John

    2011-01-01

    In this paper, the choice of classic grounded theory will be discussed and justified in the context of the first author's PhD research. The methodological discussion takes place within the context of PhD research entitled: Development of a stakeholder-led framework for a structured education programme that will prepare nurses and healthcare assistants to deliver a psychosocial intervention for people with dementia. There is a lack of research and limited understanding of the effect of psychosocial interventions on people with dementia. The first author thought classic grounded theory a suitable research methodology to investigate as it is held to be ideal for areas of research where there is little understanding of the social processes at work. The literature relating to the practical application of classic grounded theory is illustrated using examples relating to four key grounded theory components: Theory development: using constant comparison and memoing, Methodological rigour, Emergence of a core category, Inclusion of self and engagement with participants. Following discussion of the choice and application of classic grounded theory, this paper explores the need for researchers to visit and understand the various grounded theory options. This paper argues that researchers new to grounded theory must be familiar with and understand the various options. The researchers will then be able to apply the methodologies they choose consistently and critically. Doing so will allow them to develop theory rigorously and they will ultimately be able to better defend their final methodological destinations.

  14. Cervicogenic somatosensory tinnitus: An indication for manual therapy? Part 1: Theoretical concept.

    Science.gov (United States)

    Oostendorp, Rob A B; Bakker, Iem; Elvers, Hans; Mikolajewska, Emilia; Michiels, Sarah; De Hertogh, Willem; Samwel, Han

    2016-06-01

    Tinnitus can be evoked or modulated by input from the somatosensory and somatomotor systems. This means that the loudness or intensity of tinnitus can be changed by sensory or motor stimuli such as muscle contractions, mechanical pressure on myofascial trigger points, transcutaneous electrical stimulation or joint movements. The neural connections and integration of the auditory and somatosensory systems of the upper cervical region and head have been confirmed by many studies. These connections can give rise to a form of tinnitus known as somatosensory tinnitus. To date only a handful of publications have focussed on (cervicogenic) somatosensory tinnitus and manual therapy. Broadening the current understanding of somatosensory tinnitus would represent a first step towards providing therapeutic approaches relevant to manual therapists. Treatment modalities involving the somatosensory systems, and particularly manual therapy, should now be re-assessed in the subgroup of patients with cervicogenic somatosensory tinnitus. The conceptual phase of this study aims to uncover underlying mechanisms linking the auditory and somatosensory systems in relation to subjective tinnitus through (i) review of the literature (part 1) and (ii) through design of a pilot study that will explore characteristics of the study population and identify relevant components and outcomes of manual therapy in patients with cervicogenic somatosensory tinnitus (part 2). This manuscript focusses the theoretical concept of (cervicogenic) somatosensory tinnitus, either with or without secondary central tinnitus or tinnitus sensitization. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Storm-Water Management Model, Version 4. Part a: user's manual

    Energy Technology Data Exchange (ETDEWEB)

    Huber, W.C.; Dickinson, R.E.

    1988-06-01

    The EPA Storm-Water Management Model (SWMM) is a comprehensive mathematical model for simulation of urban runoff water quality and quantity in storm and combined sewer systems. All aspects of the urban hydrologic and quality cycles are simulated, including surface and subsurface runoff, transport through the drainage network, storage and treatment. Part A of the two-volume report is an update of the user's manuals issued in 1971, 1975, and 1981. Part B is a user's manual for EXTRAN, a flow-routing model that can be used both as a block of the SWMM package and as an independent model. The SWMM user's manual provides detailed descriptions for program blocks for Runoff, Transport, Storage/Treatment, Combine, Statistics, Rain, Temp and Graph (part of the Executive Block). EXTRAN represents a drainage system as links and nodes, allowing simulation of parallel or looped-pipe networks; weirs, orifices, and pumps; and system surcharges.

  16. Collision Avoidance Short Course Part I: Theory

    Science.gov (United States)

    Hejduk, Matthew D.

    2017-01-01

    Satellite conjunction assessment is perhaps the fastest-growing area in space situational awareness and protection, with military, civil, and commercial satellite owner operators embracing more and more sophisticated processes to avoid the avoidable namely collisions between high-value space assets and orbital debris. NASA and CNES have collaborated to offer an introductory short course on all the major aspects of the conjunction assessment problem. This half-day course will cover satellite conjunction dynamics and theory, JSpOC conjunction data products, major risk assessment parameters and plots, conjunction remediation decision support, and present and future challenges. This briefing represents the NASA portion of the course.

  17. Fundamental U-Theory of Time. Part 1

    Directory of Open Access Journals (Sweden)

    Yuvraj J. Gopaul

    2016-02-01

    Full Text Available The Fundamental U-Theory of Time (Part 1 is an original theory that aims to unravel the mystery of what exactly is ‘time’. To date very few explanations, from the branches of physics or cosmology, have succeeded to provide an accurate and comprehensive depiction of time. Most explanations have only managed to provide partial understanding or at best, glimpses of its true nature. The U-Theory uses ‘Thought Experiments’ to uncover the determining characteristics of time. In part 1 of this theory, the focus is not on the mathematics as it is on the accuracy of the depiction of time. Moreover, it challenges current views on theoretical physics, particularly on the idea of ‘time travel’. Notably, it is a theory seeking to present a fresh approach for reviewing Einstein’s Theory of Relativity, while unlocking new pathways for upcoming research in the field of physics and cosmology.

  18. PREREM: an interactive data preprocessing code for INREM II. Part I: user's manual. Part II: code structure

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, M.T.; Fields, D.E.

    1981-05-01

    PREREM is an interactive computer code developed as a data preprocessor for the INREM-II (Killough, Dunning, and Pleasant, 1978a) internal dose program. PREREM is intended to provide easy access to current and self-consistent nuclear decay and radionuclide-specific metabolic data sets. Provision is made for revision of metabolic data, and the code is intended for both production and research applications. Documentation for the code is in two parts. Part I is a user's manual which emphasizes interpretation of program prompts and choice of user input. Part II stresses internal structure and flow of program control and is intended to assist the researcher who wishes to revise or modify the code or add to its capabilities. PREREM is written for execution on a Digital Equipment Corporation PDP-10 System and much of the code will require revision before it can be run on other machines. The source program length is 950 lines (116 blocks) and computer core required for execution is 212 K bytes. The user must also have sufficient file space for metabolic and S-factor data sets. Further, 64 100 K byte blocks of computer storage space are required for the nuclear decay data file. Computer storage space must also be available for any output files produced during the PREREM execution. 9 refs., 8 tabs.

  19. Aircraft noise prediction program theoretical manual: Rotorcraft System Noise Prediction System (ROTONET), part 4

    Science.gov (United States)

    Weir, Donald S.; Jumper, Stephen J.; Burley, Casey L.; Golub, Robert A.

    1995-01-01

    This document describes the theoretical methods used in the rotorcraft noise prediction system (ROTONET), which is a part of the NASA Aircraft Noise Prediction Program (ANOPP). The ANOPP code consists of an executive, database manager, and prediction modules for jet engine, propeller, and rotor noise. The ROTONET subsystem contains modules for the prediction of rotor airloads and performance with momentum theory and prescribed wake aerodynamics, rotor tone noise with compact chordwise and full-surface solutions to the Ffowcs-Williams-Hawkings equations, semiempirical airfoil broadband noise, and turbulence ingestion broadband noise. Flight dynamics, atmosphere propagation, and noise metric calculations are covered in NASA TM-83199, Parts 1, 2, and 3.

  20. Orthogonal polynomials on the unit circle part 2 spectral theory

    CERN Document Server

    Simon, Barry

    2013-01-01

    This two-part book is a comprehensive overview of the theory of probability measures on the unit circle, viewed especially in terms of the orthogonal polynomials defined by those measures. A major theme involves the connections between the Verblunsky coefficients (the coefficients of the recurrence equation for the orthogonal polynomials) and the measures, an analog of the spectral theory of one-dimensional Schrödinger operators. Among the topics discussed along the way are the asymptotics of Toeplitz determinants (Szegő's theorems), limit theorems for the density of the zeros of orthogonal po

  1. Orthogonal polynomials on the unit circle part 1 classical theory

    CERN Document Server

    2009-01-01

    This two-part book is a comprehensive overview of the theory of probability measures on the unit circle, viewed especially in terms of the orthogonal polynomials defined by those measures. A major theme involves the connections between the Verblunsky coefficients (the coefficients of the recurrence equation for the orthogonal polynomials) and the measures, an analog of the spectral theory of one-dimensional Schrodinger operators. Among the topics discussed along the way are the asymptotics of Toeplitz determinants (Szegő's theorems), limit theorems for the density of the zeros of orthogonal po

  2. Operator theory a comprehensive course in analysis, part 4

    CERN Document Server

    Simon, Barry

    2015-01-01

    A Comprehensive Course in Analysis by Poincaré Prize winner Barry Simon is a five-volume set that can serve as a graduate-level analysis textbook with a lot of additional bonus information, including hundreds of problems and numerous notes that extend the text and provide important historical background. Depth and breadth of exposition make this set a valuable reference source for almost all areas of classical analysis. Part 4 focuses on operator theory, especially on a Hilbert space. Central topics are the spectral theorem, the theory of trace class and Fredholm determinants, and the study of

  3. Cold rolling precision forming of shaft parts theory and technologies

    CERN Document Server

    Song, Jianli; Li, Yongtang

    2017-01-01

    This book presents in detail the theory, processes and equipment involved in cold rolling precision forming technologies, focusing on spline and thread shaft parts. The main topics discussed include the status quo of research on cold rolling precision forming technologies; the design and calculation of process parameters; the numerical simulation of cold rolling forming processes; and the equipment used in cold rolling forming. The mechanism of cold rolling forming is extremely complex, and research on the processes, theory and mechanical analysis of spline cold rolling forming has remained very limited to date. In practice, the forming processes and production methods used are mainly chosen on the basis of individual experience. As such, there is a marked lack of both systematic, theory-based guidelines, and of specialized books covering theoretical analysis, numerical simulation, experiments and equipment used in spline cold rolling forming processes – all key points that are included in this book and ill...

  4. A theory manual for multi-physics code coupling in LIME.

    Energy Technology Data Exchange (ETDEWEB)

    Belcourt, Noel; Bartlett, Roscoe Ainsworth; Pawlowski, Roger Patrick; Schmidt, Rodney Cannon; Hooper, Russell Warren

    2011-03-01

    The Lightweight Integrating Multi-physics Environment (LIME) is a software package for creating multi-physics simulation codes. Its primary application space is when computer codes are currently available to solve different parts of a multi-physics problem and now need to be coupled with other such codes. In this report we define a common domain language for discussing multi-physics coupling and describe the basic theory associated with multiphysics coupling algorithms that are to be supported in LIME. We provide an assessment of coupling techniques for both steady-state and time dependent coupled systems. Example couplings are also demonstrated.

  5. Chemical Applications of Graph Theory: Part II. Isomer Enumeration.

    Science.gov (United States)

    Hansen, Peter J.; Jurs, Peter C.

    1988-01-01

    Discusses the use of graph theory to aid in the depiction of organic molecular structures. Gives a historical perspective of graph theory and explains graph theory terminology with organic examples. Lists applications of graph theory to current research projects. (ML)

  6. Cervicogenic somatosensory tinnitus: An indication for manual therapy plus education? Part 2: A pilot study

    NARCIS (Netherlands)

    Oostendorp, R.A.B.; Bakker, I.; Elvers, H.; Mikolajewska, E.; Michiels, S.; Hertogh, W. de; Samwel, H.

    2016-01-01

    OBJECTIVES: The aim of this study was to evaluate the efficacy of Manual Therapy Utrecht (MTU) plus education in patients with cervicogenic somatosensory tinnitus (CeT). STUDY DESIGN: Pretest-posttest design. METHOD: Five hundred and six patients were referred or referred themselves. A subgroup of

  7. Effects of theory training, hands-on supervision and a self-instructional treatment manual on staff competency

    Directory of Open Access Journals (Sweden)

    Linda Teikari Hatlenes

    2016-12-01

    Full Text Available Employing a randomized control group design, this study compared the efficacy of staff training using theory training, hands-on supervision and a self-instructional teaching manual. Participants were 12 undergraduate, health or social-work students. Initially, participants were given a three-hour lecture, and as a result, staff-participants increased their use of correct teaching procedures, but not to mastery. Participants in both groups continued to increase their teaching skills after intervention with either hands-on training or the self-instructional manual, though best effect was achieved with hands-on supervision. This effect was maintained at a two-month follow-up. At the end of the experiment, participants in the treatment manual group received hands-on supervision. As a result, their performances increased to the same levels as the participants in the hands-on supervision group. Hence, hands-on supervision was superior in increasing teaching performances. Participants receiving hands-on supervision reported that they were comfortable receiving this type of supervision, that the hands-on supervision was the best way to learn correct teaching procedures and that they would prefer hands-on supervision in a future job situation. Also, independent assessors rated hands-on supervision as the most suitable intervention.

  8. Integrated Computer-Aided Manufacturing (ICAM) Architecture Part 2. Volume 6. Dynamics Modeling Manual (IDEF2)

    Science.gov (United States)

    1981-06-01

    w^mmmmiu «i ii,i ii.i..ii ^ wmw ^mm ■■■■■■■ Manufacturing systems can be viewed and modeled in many different ways. IDEF- views a system as...Users Manual, in preparation, Pritsker & Associates, Inc. 2. H. hn, C. J. a.id S. S. Shapiro, Statistical Models in Engineering , John Wiley & Sons

  9. Lagrangian intersection Floer theory anomaly and obstruction, part I

    CERN Document Server

    Fukaya, Kenji; Ohta, Hiroshi; Ono, Kaoru

    2009-01-01

    This is a two-volume series research monograph on the general Lagrangian Floer theory and on the accompanying homological algebra of filtered A_\\infty-algebras. This book provides the most important step towards a rigorous foundation of the Fukaya category in general context. In Volume I, general deformation theory of the Floer cohomology is developed in both algebraic and geometric contexts. An essentially self-contained homotopy theory of filtered A_\\infty algebras and A_\\infty bimodules and applications of their obstruction-deformation theory to the Lagrangian Floer theory are presented. Volume II contains detailed studies of two of the main points of the foundation of the theory: transversality and orientation. The study of transversality is based on the virtual fundamental chain techniques (the theory of Kuranishi structures and their multisections) and chain level intersection theories. A detailed analysis comparing the orientations of the moduli spaces and their fiber products is carried out. A self-co...

  10. Lagrangian intersection Floer theory anomaly and obstruction, part II

    CERN Document Server

    Fukaya, Kenji; Ohta, Hiroshi; Ono, Kaoru

    2009-01-01

    This is a two-volume series research monograph on the general Lagrangian Floer theory and on the accompanying homological algebra of filtered A_\\infty-algebras. This book provides the most important step towards a rigorous foundation of the Fukaya category in general context. In Volume I, general deformation theory of the Floer cohomology is developed in both algebraic and geometric contexts. An essentially self-contained homotopy theory of filtered A_\\infty algebras and A_\\infty bimodules and applications of their obstruction-deformation theory to the Lagrangian Floer theory are presented. Volume II contains detailed studies of two of the main points of the foundation of the theory: transversality and orientation. The study of transversality is based on the virtual fundamental chain techniques (the theory of Kuranishi structures and their multisections) and chain level intersection theories. A detailed analysis comparing the orientations of the moduli spaces and their fiber products is carried out. A self-co...

  11. Grounded theory in nursing research: Part 2--Critique.

    Science.gov (United States)

    McCann, Terence V; Clark, Eileen

    2003-01-01

    In the first article in this series (McCann and Clark 2003), the methodological characteristics of grounded theory were examined. In this, the second article on grounded theory, Terence McCann and Eileen Clark critique the methodology. They then summarise the main differences between Glaser's approach and Strauss and Corbin's approach to grounded theory.

  12. Cervicogenic somatosensory tinnitus: An indication for manual therapy plus education? Part 2: A pilot study.

    Science.gov (United States)

    Oostendorp, Rob A B; Bakker, Iem; Elvers, Hans; Mikolajewska, Emilia; Michiels, Sarah; De Hertogh, Willem; Samwel, Han

    2016-06-01

    The aim of this study was to evaluate the efficacy of Manual Therapy Utrecht (MTU) plus education in patients with cervicogenic somatosensory tinnitus (CeT). Pretest-posttest design. Five hundred and six patients were referred or referred themselves. A subgroup of patients was identified with CeT, and within this a subgroup with tinnitus sensitization (TS). Two CeT groups were created based on the presence or absence of TS. Both groups underwent manual therapy combined with tinnitus education. Tinnitus intensity (VAS-tin 0-100 mm) was the primary outcome measure. Number of treatments and adverse effects were the secondary outcome measures. A total of 122 patients with CeT (24.1%) were included (average age 53.3 years [±9.8], female 38.5% and duration of tinnitus 7.3 years [±8.9]). Patients were divided into two groups: 55 patients (45.1%) with TS (CeT + TS group) and 67 patients (54.9%) without TS (CeT - TS group). Pretest to posttest differences on the VAS-tin were statistically significant within both groups (CeT - TS group: difference VAS-tin 5.9 [p = 0.01]; CeT + TS group: difference VAS-tin 18.2 [p = 0.00]), and between the groups in favor of the CeT + TS group (difference VAS-tin 12.3 [p = 0.01]). Pretest to posttest differences were clinically significant for the CeT + TS group (difference VAS-tin 18.2 [MCIC = ≥10 mm VAS-tin]) and between the groups (difference VAS-tin 12.3 in favor of the CeT + TS group). The average number of treatment sessions was 9.6 (±2.6) for the CeT - TS group and 10.3 (±2.5) for the CeT + TS group, a non-significant difference. There were no adverse effects in either group. Despite its limitations, this study provides valuable information on both the characteristics of patients with CeT and TS in a Dutch primary care manual therapy practice and on the potential effectiveness of MTU combined with tinnitus education for the subgroup of CeT + TS patients. Copyright © 2016 Elsevier Ltd. All rights

  13. The Systemic Theory of Living Systems and Relevance to CAM: the Theory (Part III)

    Science.gov (United States)

    2005-01-01

    Western medical science lacks a solid philosophical and theoretical approach to disease cognition and therapeutics. My first two articles provided a framework for a humane medicine based on Modern Biophysics. Its precepts encompass modern therapeutics and CAM. Modern Biophysics and its concepts are presently missing in medicine, whether orthodox or CAM, albeit they probably provide the long sought explanation that bridges the abyss between East and West. Key points that differentiate Systemic from other systems' approaches are ‘Intelligence’, ‘Energy’ and the objective ‘to survive’. The General System Theory (GST) took a forward step by proposing a departure from the mechanistic biological concept—of analyzing parts and processes in isolation—and brought us towards an organismic model. GST examines the system's components and results of their interaction. However, GST still does not go far enough. GST assumes ‘Self-Organization’ as a spontaneous phenomenon, ignoring a causative entity or central controller to all systems: Intelligence. It also neglects ‘Survive’ as the directional motivation common to any living system, and scarcely assigns ‘Energy’ its true inherent value. These three parameters, Intelligence, Energy and Survive, are vital variables to be considered, in our human quest, if we are to achieve a unified theory of life. PMID:16136205

  14. The Systemic Theory of Living Systems and Relevance to CAM: the Theory (Part III

    Directory of Open Access Journals (Sweden)

    José A. Olalde Rangel

    2005-01-01

    Full Text Available Western medical science lacks a solid philosophical and theoretical approach to disease cognition and therapeutics. My first two articles provided a framework for a humane medicine based on Modern Biophysics. Its precepts encompass modern therapeutics and CAM. Modern Biophysics and its concepts are presently missing in medicine, whether orthodox or CAM, albeit they probably provide the long sought explanation that bridges the abyss between East and West. Key points that differentiate Systemic from other systems' approaches are ‘Intelligence’, ‘Energy’ and the objective ‘to survive’. The General System Theory (GST took a forward step by proposing a departure from the mechanistic biological concept—of analyzing parts and processes in isolation—and brought us towards an organismic model. GST examines the system's components and results of their interaction. However, GST still does not go far enough. GST assumes ‘Self-Organization’ as a spontaneous phenomenon, ignoring a causative entity or central controller to all systems: Intelligence. It also neglects ‘Survive’ as the directional motivation common to any living system, and scarcely assigns ‘Energy’ its true inherent value. These three parameters, Intelligence, Energy and Survive, are vital variables to be considered, in our human quest, if we are to achieve a unified theory of life.

  15. School Leaders and Transformational Leadership Theory: Time to Part Ways?

    Science.gov (United States)

    Berkovich, Izhak

    2016-01-01

    Purpose: After decades in which transformational leadership theory has prevailed as the dominant paradigm in leadership scholarship, critical voices have started raising serious concerns about its falsifiability, suggesting that transformational leadership theory should be abandoned. Although transformational leadership is a key to conceptualizing…

  16. Discovery of Quantum structure and A Theory of Everything Part I and Part II

    Science.gov (United States)

    Zhang, Meggie

    2012-10-01

    (Part I) During my research I discovered logical errors in the logic of science and in mathematics. These errors caused scientists missed out important information when interpreting data. This led me to revisit the method of science and the existing results and able to find new information, which lead to the discovery of photon's structure. A ``particle collision illumination'' experiment then provided direct evidence supported the structure. Analysis of the properties of the structure suggested an organized but not-continuous multi-dimension (n-D) space within. Therefore I formed a hypothesis of a not-continuous n-D space structure. In search for evidence, I turned into crystal technology, and found direct evidence supported the hypotesis, then further particle collision found more evidence support this finding. (Part II) Analysis of single electron buildup revealed star and galaxy formation is from a single particle following a predictable pattern. This pattern is also common in matter formation. Analysis of the quantum structure suggested the formation of a larger structure through the space expansion within the structure. Further experiment results support the finding and result revealed the expansion is through space folding. Result also suggested a violation of energy conservation law that energy is created during the formation of matter, and matter itself is moving from a lower energy state to a higher energy state. When putting all information together, I arrived to a theory of everything which gives explanations to all existing phenomenon in the universe including black hole, dark energy, star formation, consciousness.

  17. SEACAS Theory Manuals: Part III. Finite Element Analysis in Nonlinear Solid Mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Laursen, T.A.; Attaway, S.W.; Zadoks, R.I.

    1999-03-01

    This report outlines the application of finite element methodology to large deformation solid mechanics problems, detailing also some of the key technological issues that effective finite element formulations must address. The presentation is organized into three major portions: first, a discussion of finite element discretization from the global point of view, emphasizing the relationship between a virtual work principle and the associated fully discrete system, second, a discussion of finite element technology, emphasizing the important theoretical and practical features associated with an individual finite element; and third, detailed description of specific elements that enjoy widespread use, providing some examples of the theoretical ideas already described. Descriptions of problem formulation in nonlinear solid mechanics, nonlinear continuum mechanics, and constitutive modeling are given in three companion reports.

  18. SEACAS Theory Manuals: Part 1. Problem Formulation in Nonlinear Solid Mechancis

    Energy Technology Data Exchange (ETDEWEB)

    Attaway, S.W.; Laursen, T.A.; Zadoks, R.I.

    1998-08-01

    This report gives an introduction to the basic concepts and principles involved in the formulation of nonlinear problems in solid mechanics. By way of motivation, the discussion begins with a survey of some of the important sources of nonlinearity in solid mechanics applications, using wherever possible simple one dimensional idealizations to demonstrate the physical concepts. This discussion is then generalized by presenting generic statements of initial/boundary value problems in solid mechanics, using linear elasticity as a template and encompassing such ideas as strong and weak forms of boundary value problems, boundary and initial conditions, and dynamic and quasistatic idealizations. The notational framework used for the linearized problem is then extended to account for finite deformation of possibly inelastic solids, providing the context for the descriptions of nonlinear continuum mechanics, constitutive modeling, and finite element technology given in three companion reports.

  19. Michigan Department of Transportation state planning and research part II program : research and implementation manual [revised June 2014].

    Science.gov (United States)

    2014-06-01

    The Research and Implementation Manual describes the administrative processes used by : Research Administration to develop and implement the Michigan Department of Transportation : (MDOT) research program. Contents of this manual include a discussion...

  20. THEORY OF SPARE PARTS INVENTORY MANAGEMENT FOR PRODUCTION EQUIPMENT

    OpenAIRE

    KATARZYNA GRONDYS

    2013-01-01

    This article presents theoretical basis of spare parts inventory management in manufacturing company. Basis definitions, allocation and differences in spare parts inventory management were compared with other manufacturing inventories. The issue of spare parts inventory management is emphasized in aspect of maintaining continuity of production and generated costs of maintaining inventory.

  1. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Data manual. Part 2: Human error probability (HEP) data; Volume 5, Revision 4

    Energy Technology Data Exchange (ETDEWEB)

    Reece, W.J.; Gilbert, B.G.; Richards, R.E. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1994-09-01

    This data manual contains a hard copy of the information in the Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) Version 3.5 database, which is sponsored by the US Nuclear Regulatory Commission. NUCLARR was designed as a tool for risk analysis. Many of the nuclear reactors in the US and several outside the US are represented in the NUCLARR database. NUCLARR includes both human error probability estimates for workers at the plants and hardware failure data for nuclear reactor equipment. Aggregations of these data yield valuable reliability estimates for probabilistic risk assessments and human reliability analyses. The data manual is organized to permit manual searches of the information if the computerized version is not available. Originally, the manual was published in three parts. In this revision the introductory material located in the original Part 1 has been incorporated into the text of Parts 2 and 3. The user can now find introductory material either in the original Part 1, or in Parts 2 and 3 as revised. Part 2 contains the human error probability data, and Part 3, the hardware component reliability data.

  2. The value of bladder filling in addition to manual elevation of presenting fetal part in cases of cord prolapse.

    Science.gov (United States)

    Bord, Ilia; Gemer, Ofer; Anteby, Eyal Y; Shenhav, Simon

    2011-05-01

    To compare perinatal outcome of deliveries complicated by cord prolapse between cases in which bladder filling was performed in addition to supporting presenting part and cases where only support was employed. A retrospective review of 44 deliveries complicated by prolapse occurring after admission was made. The first group included 29 patients who were rushed to a cesarean section with doctor's hand inside the vagina pushing the presenting part. The second group of 15 patients, included women whose bladder was filled with 500 cc of normal saline in addition to manual support. Time to delivery was similar in the first and second group (19.7 ± 9.46 and 21.6 ± 11.9, P = 0.57; respectively) as well as the mean neonatal pH values (7.28 ± 0.09 and 7.26 ± 0.07, P = 0.55; respectively). There was no significant difference in proportion of neonates with an Apgar score of less than 7 between the two arms. The addition of bladder filling to further displace the presenting part did not improve the neonatal outcome which was not compromised regardless of the measures employed.

  3. Unravelling functional neurology: a scoping review of theories and clinical applications in a context of chiropractic manual therapy.

    Science.gov (United States)

    Meyer, Anne-Laure; Meyer, Amanda; Etherington, Sarah; Leboeuf-Yde, Charlotte

    2017-01-01

    Functional Neurology (FN), a seemingly attractive treatment approach used by some chiropractors, proposes to have an effect on a multitude of conditions but some of its concepts are controversial. A scoping review was performed to describe, in the context of chiropractic manual therapy, 1) the FN theories, and 2) its clinical applications (i.e. its indications, examination procedures, treatment modalities, treatment plans, and clinical outcomes) using four sources: i) one key textbook, ii) the scientific peer-reviewed literature, iii) websites from chiropractors using FN, and iv) semi-structured interviews of chiropractors using FN. The scientific literature was searched in PubMed, PsycINFO, and SPORTDiscus, completed by a hand search in the journal Functional Neurology, Rehabilitation and Ergonomics (November 2016 and March 2017, respectively). The only textbook on the topic we found was included and articles were chosen if they had an element of manual therapy. There was no restriction for study design but discussion papers were excluded. Websites were found in Google using the search term "Functional Neurology". Chiropractors, known to use FN, were invited based on their geographical location. Theories were mainly uncovered in the textbook as were all aspects of the clinical applications except treatment plans. The other three sources were used for the five aspects of clinical applications. Results were summarized and reported extensively in tables. Eleven articles were included, five websites scrutinized, and four semi-structured interviews performed. FN is based on the belief that reversible lesions in the nervous system are the cause of a multitude of conditions and that specific clusters of neurons can be positively affected by manipulative therapy, but also by many other stimuli. Diagnostic procedures include both conventional and unusual tests, with an interpretation specific to FN. Initial treatment is intense and clinical outcomes reported as positive

  4. The 'realities' of part-time nursing: a grounded theory study.

    Science.gov (United States)

    Jamieson, Lynn N; Williams, Leonie Mosel; Lauder, William; Dwyer, Trudy

    2008-10-01

    To develop a theory that explains the 'realities' of part-time nursing. While little is known about the phenomenon of part-time nursing, increasing numbers of nurses work in part-time employment. Grounded theory. The problem that part-time nurses shared was an inability to achieve their personal optimal nursing potential. Motivators to work part-time, employment hours, specialty, individual and organizational factors formed contextual conditions that led to this problem. Part-time nurses responded to the challenges through a process of adaptation and adjustment. Harnessing the full productive potential of part-time nurses requires support to limit the difficulties that they encounter. The developed theory provides a valuable guide to managerial action. Nurse Managers need to consider the developed substantive theory when planning and managing nursing workforces.

  5. Management (Theory) When We Are Only Partly in Control

    DEFF Research Database (Denmark)

    Niaz, Nausheen; Foss, Nicolai; Ramsøy, Thomas Zöega

    2013-01-01

    Conventionally practical aspects of work motivation alongside management theory have long focused on the conscious elements pertaining decision-making. We show that decision neuroscience introduces new mediator and moderator variables that influence the decision-making process that arises during...

  6. Kinetic theory of plasma waves: Part II homogeneous plasma

    NARCIS (Netherlands)

    Westerhof, E.

    2000-01-01

    The theory of electromagnetic waves in a homogeneous plasma is reviewed. The linear response of the plasma to the waves is obtained in the form of the dielectric tensor. Waves ranging from the low frequency Alfven to the high frequency electron cyclotron waves are discussed in the limit of the cold

  7. KINETIC THEORY OF PLASMA WAVES: Part II: Homogeneous Plasma

    NARCIS (Netherlands)

    Westerhof, E.

    2010-01-01

    The theory of electromagnetic waves in a homogeneous plasma is reviewed. The linear response of the plasma to the waves is obtained in the form of the dielectric tensor. Waves ranging from the low frequency Alfven to the high frequency electron cyclotron waves are discussed in the limit of the cold

  8. Kinetic theory of plasma waves - Part II: Homogeneous plasma

    NARCIS (Netherlands)

    Westerhof, E.

    2008-01-01

    The theory of electromagnetic waves in a homogeneous plasma is reviewed. The linear response of the plasma to the waves is obtained in the form of the dielectric tensor. Waves ranging from the low frequency Alfven to the high frequency electron cyclotron waves axe discussed in the limit of the cold

  9. SAFSIM theory manual: A computer program for the engineering simulation of flow systems

    Energy Technology Data Exchange (ETDEWEB)

    Dobranich, D.

    1993-12-01

    SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program for simulating the integrated performance of complex flow systems. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary SAFSIM development goals. SAFSIM contains three basic physics modules: (1) a fluid mechanics module with flow network capability; (2) a structure heat transfer module with multiple convection and radiation exchange surface capability; and (3) a point reactor dynamics module with reactivity feedback and decay heat capability. Any or all of the physics modules can be implemented, as the problem dictates. SAFSIM can be used for compressible and incompressible, single-phase, multicomponent flow systems. Both the fluid mechanics and structure heat transfer modules employ a one-dimensional finite element modeling approach. This document contains a description of the theory incorporated in SAFSIM, including the governing equations, the numerical methods, and the overall system solution strategies.

  10. SIERRA Low Mach Module: Fuego Theory Manual Version 4.46.

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-09-01

    The SIERRA Low Mach Module: Fuego along with the SIERRA Participating Media Radiation Module: Syrinx, henceforth referred to as Fuego and Syrinx, respectively, are the key elements of the ASCI fire environment simulation project. The fire environment simulation project is directed at characterizing both open large-scale pool fires and building enclosure fires. Fuego represents the turbulent, buoyantly-driven incompressible flow, heat transfer, mass transfer, combustion, soot, and absorption coefficient model portion of the simulation software. Syrinx represents the participating-media thermal radiation mechanics. This project is an integral part of the SIERRA multi-mechanics software development project. Fuego depends heavily upon the core architecture developments provided by SIERRA for massively parallel computing, solution adaptivity, and mechanics coupling on unstructured grids.

  11. SIERRA Low Mach Module: Fuego Theory Manual Version 4.44

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-04-01

    The SIERRA Low Mach Module: Fuego along with the SIERRA Participating Media Radiation Module: Syrinx, henceforth referred to as Fuego and Syrinx, respectively, are the key elements of the ASCI fire environment simulation project. The fire environment simulation project is directed at characterizing both open large-scale pool fires and building enclosure fires. Fuego represents the turbulent, buoyantly-driven incompressible flow, heat transfer, mass transfer, combustion, soot, and absorption coefficient model portion of the simulation software. Syrinx represents the participating-media thermal radiation mechanics. This project is an integral part of the SIERRA multi-mechanics software development project. Fuego depends heavily upon the core architecture developments provided by SIERRA for massively parallel computing, solution adaptivity, and mechanics coupling on unstructured grids.

  12. SubDyn User's Guide and Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Damiani, Rick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jonkman, Jason [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hayman, Greg [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    SubDyn is a time-domain structural-dynamics module for multimember fixed-bottom substructures created by the National Renewable Energy Laboratory (NREL) through U.S. Department of Energy Wind and Water Power Program support. The module has been coupled into the FAST aero-hydro-servo-elastic computer-aided engineering (CAE) tool. Substructure types supported by SubDyn include monopiles, tripods, jackets, and other lattice-type substructures common for offshore wind installations in shallow and transitional water depths. SubDyn can also be used to model lattice support structures for land-based wind turbines. This document is organized as follows. Section 1 details how to obtain the SubDyn and FAST software archives and run both the stand-alone SubDyn or SubDyn coupled to FAST. Section 2 describes the SubDyn input files. Section 3 discusses the output files generated by SubDyn; these include echo files, a summary file, and the results file. Section 4 provides modeling guidance when using SubDyn. The SubDyn theory is covered in Section 5. Section 6 outlines future work, and Section 7 contains a list of references. Example input files are shown in Appendixes A and B. A summary of available output channels are found in Appendix C. Instructions for compiling the stand-alone SubDyn program are detailed in Appendix D. Appendix E tracks the major changes we have made to SubDyn for each public release.

  13. Strategic drivers of contract manufacturing: Part I, The theory.

    Science.gov (United States)

    Tomlinson, Geoff; Geimer, Harald

    2002-12-01

    Medical device manufacturers and diagnostics companies have significantly increased their use of contract manufacturers to outsource production of components. This, the first of a two-part article, reviews strategic benefits and best practices in outsourcing.

  14. Applications of Algebraic Geometry to Systems Theory. Part 1

    Science.gov (United States)

    Hermann, Robert

    1977-01-01

    Basic theorems of algebraic geometry are applied to prove some pole-placement theorems, including an improved version of pole placement with output feedback. Examples are given which show the limitations of the algebro-geometric theorems and their potential value for systems theory. This paper and those to follow might contribute towards making the powerful theorems of modern algebraic geometry accessible and applicable to problems of engineering.

  15. Grounded theory in nursing research: Part 3--Application.

    Science.gov (United States)

    McCann, Terence V; Clark, Eileen

    2003-01-01

    In the first article in this series, the methodological characteristics of grounded theory were examined (McCann and Clark 2003a). In the second article, a critique was presented of the methodology, with particular reference to the approaches of Glaser, and Strauss and Corbin (McCann and Clark 2003b). In this, the final article in the series, Terence McCann and Eileen Clark illustrate how to apply the methodology to nursing research using the example of McCann's Australian study (McCann and Baker 2001) of how community mental health nurses promote wellness with clients who are experiencing an early episode of psychotic illness.

  16. Health education and multimedia learning: connecting theory and practice (Part 2).

    Science.gov (United States)

    Mas, Francisco G; Plass, Jan; Kane, William M; Papenfuss, Richard L

    2003-10-01

    Part 1 of this article reviewed the contributions of educational psychology to the early development of health behavior theory and the difficulties faced by health education in adopting some of the perspectives that today guide multimedia learning. Whereas Part 1 involved discussion at the theoretical level, the purpose of Part 2 is to connect theory and practice by describing the most relevant multimedia learning theories and by providing recommendations for developing multimedia health education programs. It also provides practitioners with specific examples of the features that may make computer-based interventions more attractive to their particular audiences.

  17. User's manual for GEOTEMP, a computer code for predicting downhole wellbore and soil temperatures in geothermal wells. Appendix to Part I report

    Energy Technology Data Exchange (ETDEWEB)

    Wooley, G.R.

    1980-03-01

    GEOTEMP is a computer code that calculates downhole temperatures in and surrounding a well. Temperatures are computed as a function of time in a flowing stream, in the wellbore, and in the soil. Flowing options available in the model include the following: injection/production, forward/reverse circulation, and drilling. This manual describes how to input data to the code and what results are printed out, provides six examples of both input and output, and supplies a listing of the code. The user's manual is an appendix to the Part I report Development of Computer Code and Acquisition of Field Temperature Data.

  18. Netflow Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Bozinoski, Radoslav; William Winters

    2016-01-01

    The purpose of this report is to document the theoretical models utilized by the computer code NETFLOW. This report will focus on the theoretical models used to analyze high Mach number fully compressible transonic flows in piping networks.

  19. RAVEN Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Alfonsi, Andrea [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mandelli, Diego [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cogliati, Joshua Joseph [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wang, Congjian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Maljovec, Daniel Patrick [Idaho National Lab. (INL), Idaho Falls, ID (United States); Talbot, Paul William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-06-01

    RAVEN is a software framework able to perform parametric and stochastic analysis based on the response of complex system codes. The initial development was aimed at providing dynamic risk analysis capabilities to the thermohydraulic code RELAP-7, currently under development at Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose stochastic and uncertainty quantification platform, capable of communicating with any system code. In fact, the provided Application Programming Interfaces (APIs) allow RAVEN to interact with any code as long as all the parameters that need to be perturbed are accessible by input files or via python interfaces. RAVEN is capable of investigating system response and explore input space using various sampling schemes such as Monte Carlo, grid, or Latin hypercube. However, RAVEN strength lies in its system feature discovery capabilities such as: constructing limit surfaces, separating regions of the input space leading to system failure, and using dynamic supervised learning techniques. The development of RAVEN started in 2012 when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework arose. RAVEN’s principal assignment is to provide the necessary software and algorithms in order to employ the concepts developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just to identify the frequency of an event potentially leading to a system failure, but the proximity (or lack thereof) to key safety-related events. Hence, the approach is interested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. peak pressure in a pipe) is exceeded under certain conditions. Most of the capabilities, implemented having RELAP-7 as a principal focus, are easily deployable to other system codes. For this reason, several side activates have been employed (e.g. RELAP5-3D, any MOOSE-based App, etc.) or are currently ongoing for coupling RAVEN with several different software. The aim of this document is to provide a set of commented examples that can help the user to become familiar with the RAVEN code usage.

  20. MASTODON Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Justin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Slaughter, Andrew [Idaho National Lab. (INL), Idaho Falls, ID (United States); Veeraraghavan, Swetha [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bolisetti, Chandrakanth [Idaho National Lab. (INL), Idaho Falls, ID (United States); Numanoglu, Ozgun Alp [Univ. of Illinois, Urbana-Champaign, IL (United States); Spears, Robert [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hoffman, William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hurt, Efe [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-05-05

    Multi-hazard Analysis for STOchastic time-DOmaiN phenomena (MASTODON) is a finite element application that aims at analyzing the response of 3-D soil-structure systems to natural and man-made hazards such as earthquakes, floods and fire. MASTODON currently focuses on the simulation of seismic events and has the capability to perform extensive ‘source-to-site’ simulations including earthquake fault rupture, nonlinear wave propagation and nonlinear soil-structure interaction (NLSSI) analysis. MASTODON is being developed to be a dynamic probabilistic risk assessment framework that enables analysts to not only perform deterministic analyses, but also easily perform probabilistic or stochastic simulations for the purpose of risk assessment.

  1. Dynamics of sessile drops. Part 3. Theory of forced oscillations

    CERN Document Server

    Bostwick, Joshua B

    2016-01-01

    A partially-wetting sessile drop is driven by a sinusoidal pressure field that produces capillary waves on the liquid/gas interface. The analysis presented in Part 1 of this series (Bostwick & Steen 2014) is extended by computing response diagrams and phase shifts for the viscous droplet, whose three phase contact-line moves with contact-angle that is a smooth function of the contact line speed. Viscous dissipation is incorporated through the viscous potential flow approximation and the critical Ohnesorge number bounding regions beyond which a given mode becomes over-damped is computed. Davis dissipation originating from the contact-line speed condition leads to damped oscillations for drops with finite contact-line mobility, even for inviscid fluids. The critical mobility and associated driving frequency to generate the largest Davis dissipation is computed. Lastly, regions of modal coexistence where two modes can be simultaneously excited by a single forcing frequency are identified. Predictions compare...

  2. Uncertainty law in ambient modal identification-Part I: Theory

    Science.gov (United States)

    Au, Siu-Kui

    2014-10-01

    Ambient vibration test has gained increasing popularity in practice as it provides an economical means for modal identification without artificial loading. Since the signal-to-noise ratio cannot be directly controlled, the uncertainty associated with the identified modal parameters is a primary concern. From a scientific point of view, it is of interest to know on what factors the uncertainty depends and what the relationship is. For planning or specification purposes, it is desirable to have an assessment of the test configuration required to achieve a specified accuracy in the modal parameters. For example, what is the minimum data duration to achieve a 30% coefficient of variation (c.o.v.) in the damping ratio? To address these questions, this work investigates the leading order behavior of the ‘posterior uncertainties’ (i.e., given data) of the modal parameters in a Bayesian identification framework. In the context of well-separated modes, small damping and sufficient data, it is shown rigorously that, among other results, the posterior c.o.v. of the natural frequency and damping ratio are asymptotically equal to ( and 1/(2, respectively; where ζ is the damping ratio; Nc is the data length as a multiple of the natural period; Bf and Bζ are data length factors that depend only on the bandwidth utilized for identification, for which explicit expressions have been derived. As the Bayesian approach allows full use of information contained in the data, the results are fundamental characteristics of the ambient modal identification problem. This paper develops the main theory. The companion paper investigates the implication of the results and verification with field test data.

  3. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  4. Health education and multimedia learning: educational psychology and health behavior theory (Part 1).

    Science.gov (United States)

    Mas, Francisco G Soto; Plass, Jan; Kane, William M; Papenfuss, Richard L

    2003-07-01

    When health education researchers began to investigate how individuals make decisions related to health and the factors that influence health behaviors, they referred to frameworks shared by educational and learning research. Health education adopted the basic principles of the cognitive revolution, which were instrumental in advancing the field. There is currently a new challenge to confront: the widespread use of new technologies for health education. To better overcome this challenge, educational psychology and instructional technology theory should be considered. Unfortunately, the passion to incorporate new technologies too often overshadows how people learn or, in particular, how people learn through computer technologies. This two-part article explains how educational theory contributed to the early development of health behavior theory, describes the most relevant multimedia learning theories and constructs, and provides recommendations for developing multimedia health education programs and connecting theory and practice.

  5. Information theory in systems biology. Part I: Gene regulatory and metabolic networks.

    Science.gov (United States)

    Mousavian, Zaynab; Kavousi, Kaveh; Masoudi-Nejad, Ali

    2016-03-01

    "A Mathematical Theory of Communication", was published in 1948 by Claude Shannon to establish a framework that is now known as information theory. In recent decades, information theory has gained much attention in the area of systems biology. The aim of this paper is to provide a systematic review of those contributions that have applied information theory in inferring or understanding of biological systems. Based on the type of system components and the interactions between them, we classify the biological systems into 4 main classes: gene regulatory, metabolic, protein-protein interaction and signaling networks. In the first part of this review, we attempt to introduce most of the existing studies on two types of biological networks, including gene regulatory and metabolic networks, which are founded on the concepts of information theory. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Laboratory blood analysis in Strigiformes-Part I: hematologic reference intervals and agreement between manual blood cell counting techniques.

    Science.gov (United States)

    Ammersbach, Mélanie; Beaufrère, Hugues; Gionet Rollick, Annick; Tully, Thomas

    2015-03-01

    While hematologic reference intervals (RI) are available for multiple raptorial species of the order Accipitriformes and Falconiformes, there is a lack of valuable hematologic information in Strigiformes that can be used for diagnostic and health monitoring purposes. The objective was to report RI in Strigiformes for hematologic variables and to assess agreement between manual cell counting techniques. A multi-center prospective study was designed to assess hematologic RI and blood cell morphology in owl species. Samples were collected from individuals representing 13 Strigiformes species, including Great Horned Owl, Snowy Owl, Eurasian Eagle Owl, Barred Owl, Great Gray Owl, Ural Owl, Northern Saw-Whet Owls, Northern Hawk Owl, Spectacled Owl, Barn Owl, Eastern Screech Owl, Long-Eared Owl, and Short-Eared Owl. Red blood cell count was determined manually using a hemocytometer. White blood cell count was determined using 3 manual counting techniques: (1) phloxine B technique, (2) Natt and Herrick technique, and (3) estimation from the smear. Differential counts and blood cell morphology were determined on smears. Reference intervals were determined and agreement between methods was calculated. Important species-specific differences were observed in blood cell counts and granulocyte morphology. Differences in WBC count between species did not appear to be predictable based on phylogenetic relationships. Overall, most boreal owl species exhibited a lower WBC count than other species. Important disagreements were found between different manual WBC counting techniques. Disagreements observed between manual counting techniques suggest that technique-specific RI should be used in Strigiformes. © 2015 American Society for Veterinary Clinical Pathology.

  7. Theory of the Whole and the Part – Ontological Perspective (E. Husserl, R. Ingarden

    Directory of Open Access Journals (Sweden)

    Barska Katarzyna

    2015-02-01

    Full Text Available The purpose of the paper is demonstrate the thesis that Ingarden's ontological system allows a better understanding of the “part-whole” problem then previous theories. Especially, if we take into account the existential ontology of Ingarden, which refers to Husserl “part-whole” theory, we can see that development of terms made by Ingarden sheds new light on old problems. In this context, particularly important is to distinguish between two existential moments: contingancy/inseparatness, because thanks to them we can talk about many different types of relationships and hence many types of objects.

  8. Savannah River Plant 200 Area technical manual. Part SP. Processing of Np/sup 237/ and Pu/sup 238/

    Energy Technology Data Exchange (ETDEWEB)

    Hill, A.J. (comp.)

    1963-01-03

    This manual covers the technology involved in the 200 Area process for the recovery of Np/sup 237/ from certain aqueous waste streams in the separations plants, for the recovery of NP/sup 237/ and Pu/sup 238/ from irradiated NpO/sub 2/-Al slugs and for the fabrication of NpO/sub 2/-Al slugs. The manual contains sections on the fundamental chemistry, the primary recovery of Np by ion exchange, the decontamination of Np by ion exchange, the processing of NpO/sub 2/-Al targets, the separation and purification of Np/sup 237/ and Pu/sup 238/, the finishing of Np, the preparation of NpO/sub 2/, the disposal of spent resin, and the safety aspects of the handling of hydrazine. The section on the fabrication of NpO/sub 2/-Al slugs will be added later. 76 refs., 22 figs.

  9. A Theory of Solvability for Lossless Power Flow Equations -- Part I: Fixed-Point Power Flow

    OpenAIRE

    Simpson-Porco, John W.

    2017-01-01

    This two-part paper details a theory of solvability for the power flow equations in lossless power networks. In Part I, we derive a new formulation of the lossless power flow equations, which we term the fixed-point power flow. The model is stated for both meshed and radial networks, and is parameterized by several graph-theoretic matrices -- the power network stiffness matrices -- which quantify the internal coupling strength of the network. The model leads immediately to an explicit approxi...

  10. Cervical anterior transpedicular screw fixation (ATPS)--Part II. Accuracy of manual insertion and pull-out strength of ATPS.

    Science.gov (United States)

    Koller, Heiko; Acosta, Frank; Tauber, Mark; Fox, Michael; Martin, Hudelmaier; Forstner, Rosmarie; Augat, Peter; Penzkofer, Rainer; Pirich, Christian; Kässmann, H; Resch, Herbert; Hitzl, Wolfgang

    2008-04-01

    Reconstruction after multilevel decompression of the cervical spine, especially in the weakened osteoporotic, neoplastic or infectious spine often requires circumferential stabilization and fusion. To avoid the additional posterior surgery in these cases while increasing rigidity of anterior-only screw-plate constructs, the authors introduce the concept of anterior transpedicular screw (ATPS) fixation. We demonstrated its morphological feasibility as well as its indications in a previous study in Part I of our project. Consequently, the objectives of the current study were to assess the ex vivo accuracy of placing ATPS into the cervical vertebra as well as the biomechanical performance of ATPS in comparison to traditional vertebral body screws (VBS) in terms of pull-out strength (POS). Twenty-three ATPS were inserted alternately to two screws into the pedicles and vertebral bodies, respectively, of six cadaveric specimens from C3-T1. For insertion of ATPS, a manual fluoroscopically assisted technique was used. Pre- and post insertional CT-scans were used to assess accuracy of ATPS insertion in the axial and sagittal planes. A newly designed grading system and accuracy score were used to delineate accuracy of ATPS insertion. Following insertion of screws, 23 ATPS and 22 VBS were subjected to pull-out testing (POT). The bone mineral density (BMD) of each specimen was assessed prior to POT. Statistical analysis showed that the incidence of correctly placed screws and non-critical pedicles breaches in axial plane was 78.3%, and 95.7% in sagittal plane. Hence, according to our definition of "critical" pedicle breach that exposes neurovascular structures at risk, 21.7% (n = 5) of all ATPS inserted showed a critical pedicle breach in axial plane. Notably, no critical pedicle perforation occurred at the C6 to T1 levels. Pull-out testing of ATPS and VBS revealed that pull-out resistance of ATPS was 2.5-fold that of VBS. Mean POS of 23 ATPS with a mean BMD of 0.566 g/cm(2

  11. Information theory in systems biology. Part II: protein-protein interaction and signaling networks.

    Science.gov (United States)

    Mousavian, Zaynab; Díaz, José; Masoudi-Nejad, Ali

    2016-03-01

    By the development of information theory in 1948 by Claude Shannon to address the problems in the field of data storage and data communication over (noisy) communication channel, it has been successfully applied in many other research areas such as bioinformatics and systems biology. In this manuscript, we attempt to review some of the existing literatures in systems biology, which are using the information theory measures in their calculations. As we have reviewed most of the existing information-theoretic methods in gene regulatory and metabolic networks in the first part of the review, so in the second part of our study, the application of information theory in other types of biological networks including protein-protein interaction and signaling networks will be surveyed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. How 2 HAWC2, the user's manual

    DEFF Research Database (Denmark)

    Larsen, Torben J.; Hansen, Anders Melchior

    from the classic approach to handle dynamic inflow, dynamic stall, skew inflow, shear effects on the induction and effects from large deflections. It has been developed within the years 2003-2006 at the aeroelastic design research programme at Risoe, National laboratory Denmark. This manual is updated......The report contains the user's manual for the aeroleastic code HAWC2. The code is intended for calculating wind turbine response in time domain and has a structural formulation based on multi-body dynamics. The aerodynamic part of the code is based on the blade element momentum theory, but extended...

  13. The biostatistical theory versus the harmful dysfunction analysis, part 1: is part-dysfunction a sufficient condition for medical disorder?

    Science.gov (United States)

    Wakefield, Jerome C

    2014-12-01

    Christopher Boorse's biostatistical theory of medical disorder claims that biological part-dysfunction (i.e., failure of an internal mechanism to perform its biological function), a factual criterion, is both necessary and sufficient for disorder. Jerome Wakefield's harmful dysfunction analysis of medical disorder agrees that part-dysfunction is necessary but rejects the sufficiency claim, maintaining that disorder also requires that the part-dysfunction causes harm to the individual, a value criterion. In this paper, I present two considerations against the sufficiency claim. First, I analyze Boorse's central argument for the sufficiency claim, the "pathologist argument," which takes pathologists' intuitions about pathology as determinative of medical disorder and conclude that it begs the question and fails to support the sufficiency claim. Second, I present four counterexamples from the medical literature in which salient part-dysfunctions are considered nondisorders, including healthy disease carriers, HIV-positive status, benign mutations, and situs inversus totalis, thus falsifying the sufficiency claim and supporting the harm criterion. © The Author 2014. Published by Oxford University Press, on behalf of the Journal of Medicine and Philosophy Inc. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  14. An Emerging Theory for Evidence Based Information Literacy Instruction in School Libraries, Part 1: Building a Foundation

    OpenAIRE

    Carol A. Gordon

    2009-01-01

    Objective – Part I of this paper aims to create a framework for an emerging theory of evidence based information literacy instruction. In order to ground this framework in existing theory, a holistic perspective views inquiry as a learning process that synthesizes information searching and knowledge building. An interdisciplinary approach is taken to relate user-centric information behavior theory and constructivist learning theory that supports this synthesis. The substantive theories that e...

  15. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  16. Radiological Control Manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  17. Managing the professional nurse. Part II. Applying management theory to the challenges.

    Science.gov (United States)

    McClure, M L

    1984-03-01

    In Part I of this article, the author reviewed the ideas of some of the major administrative thinkers over the past 30 years. Having set the stage with an overview of current thinking in the general area of management theory, the author here examines some of the specific challenges involved in managing the professional nurse. Often, these problems are unique and the management theorists offer only limited help. In other instances, management theory is directly relevant. The author addresses the following four broad categories that are unique to the profession of nursing: nursing as a female profession, professionalism and the lack of it, stress and burnout, and expectancy congruence.

  18. Modelo Pedagogico de Educacion Primaria para Adultos: Manual para el Asesor de Estudiantes Libres. Primera Parte (A Pedagogical Model for Adult Primary Education: Manual for the Student Advisor. Part One).

    Science.gov (United States)

    Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

    This guide, part of a Mexican series of instructional materials, is intended for advisors of students participating in an adult education program offered through public and private organizations in communities in Mexico. The first part of the program comprises Spanish and math; the second, education for family life, education for community life,…

  19. Fission product data for thermal reactors. Part 2. Users manual for EPRI-CINDER code and data

    Energy Technology Data Exchange (ETDEWEB)

    England, T.R.; Wilson, W.B.; Stamatelatos, M.G.

    1976-12-01

    The objective of this project has been the production of a data library suitable for calculating the buildup of fission product nuclides during the operation of a thermal power reactor. This has been accomplished by reducing the fission product data from the fourth version of the national reference nuclear data base--ENDF/B into a series of linearized decay chains and calculating the effective yields and cross sections of the relevant nuclides. Two versions of the fission product library have been prepared: an 84 chain master library and a reduced 12 chain library, both of which can be used as input for the computer program CINDER. A users manual for an upgraded version of the burnup program CINDER (renamed EPRI-CINDER) is presented.

  20. Global optimization of truss topology with discrete bar areas—Part I: Theory of relaxed problems

    DEFF Research Database (Denmark)

    Achtziger, Wolfgang; Stolpe, Mathias

    2008-01-01

    to circumvent the non-convexity and to calculate global optimizers. Moreover, the QPs to be treated in the branch-and-bound search tree differ from each other just in the objective function. In Part I we give an introduction to the problem and collect all theory and related proofs for the treatment...... of the paper together with Part II present an algorithmic framework for the calculation of a global optimizer of the underlying large-scaled mixed integer design problem. This framework is given by a convergent branch-and-bound algorithm which is based on solving a sequence of nonconvex continuous relaxations....... The main issue of the paper and of the approach lies in the fact that the relaxed nonlinear optimization problem can be formulated as a quadratic program (QP). Here the paper generalizes and extends the available theory from the literature. Although the Hessian of this QP is indefinite, it is possible...

  1. The organizational measurement manual

    National Research Council Canada - National Science Library

    Wealleans, David

    2001-01-01

    ... Relationship of process to strategic measurements Summary 37 36Contents 19/10/2000 1:23 pm Page vi vi THE ORGANIZATIONAL MEASUREMENT MANUAL 4 PART 2 ESTABLISHING A PROCESS MEASUREMENT PROGRAMME...

  2. High Power Klystrons: Theory and Practice at the Stanford Linear Accelerator CenterPart I

    Energy Technology Data Exchange (ETDEWEB)

    Caryotakis, G.

    2004-12-15

    This is Part I of a two-part report on design and manufacturing methods used at SLAC to produce accelerator klystrons. Chapter 1 begins with the history and applications for klystrons, in both of which Stanford University was extensively involved. The remaining chapters review the theory of klystron operation, derive the principal formulae used in their design, and discuss the assumptions that they involve. These formulae are subsequently used in small-signal calculations of the frequency response of a particular klystron, whose performance is also simulated by two different computer codes. The results of calculations and simulations are compared to the actual performance of the klystron.

  3. Dakota, a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis version 6.0 theory manual

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Brian M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ebeida, Mohamed Salah [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Eldred, Michael S [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jakeman, John Davis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Swiler, Laura Painton [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stephens, John Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vigil, Dena M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wildey, Timothy Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bohnhoff, William J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Eddy, John P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hu, Kenneth T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dalbey, Keith R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bauman, Lara E [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hough, Patricia Diane [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-05-01

    The Dakota (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a exible and extensible interface between simulation codes and iterative analysis methods. Dakota contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quanti cation with sampling, reliability, and stochastic expansion methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the Dakota toolkit provides a exible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a theoretical manual for selected algorithms implemented within the Dakota software. It is not intended as a comprehensive theoretical treatment, since a number of existing texts cover general optimization theory, statistical analysis, and other introductory topics. Rather, this manual is intended to summarize a set of Dakota-related research publications in the areas of surrogate-based optimization, uncertainty quanti cation, and optimization under uncertainty that provide the foundation for many of Dakota's iterative analysis capabilities.

  4. COUPLEFLO: a computer program for coupled creeping viscous flow and conductive-convective heat transfer. Part II. User's manual

    Energy Technology Data Exchange (ETDEWEB)

    Chavez, P.F.; Dawson, P.R.

    1978-11-01

    COUPLEFLO is a two-dimensional finite element code for plane strain or axisymmetric analyses of thermomechanically coupled systems. It is capable of analyzing the creeping flow of non-Newtonian fluids or the secondary creep of solids. COUPLEFLO solves equations for conductive-convective heat transfer to determine the thermal response of a system. Thermomechanical coupling between the flow field and temperature distribution can exist in terms of temperature dependent material properties, temperature dependent body forces, viscous dissipation, material convection, and changing system geometry. Either transient or steady-state problems can be analyzed in Eulerian or quasi-Lagrangian reference frames. Part I - Theoretical Background contains the governing equation, finite element formulation, and verification of the code capabilities. Part II - User's Manual contains instructions for code use. Currently, COUPLEFLO is available at Sandia Laboratories in Albuquerque on the 7600, 6600, and NOS systems.

  5. Some opportunities for transfer from theory to practice within chosen parts of philosophical kinantropology

    Directory of Open Access Journals (Sweden)

    Emanuel Hurych

    2010-06-01

    Full Text Available The article deals with a certain form of structures coming from practical needs of the physical activities participants. These structures are understood as a close relation between two entities, represented by physical activity and philosophy. The text pay attention on the fact that especially transfer of the information from theory to practice contains some problems, and it tries to find the reasons for this situation. Then the article deals with the question whether some practical problems connected with movement activity practice should be an object of the interest of philosophical kinanthropology, or not. Another part of the text is devoted to the comparison of two phenomena called "return to nature" and "return to movement" and different situation concerning their relation between theory and practice. Newly the problem of increasing physical activity of common population (connected with "return to nature" should be focused on within this text. The meaning of the interpreter as a guide from theory to practice is mentioned in the essay, as well. The author means the transfer between theory and empirical issues works in better way in the case of the direction from practice towards theory than vice versa. The article gives some examples of obstacles which blockade the opposite process and it is shown in the example of kalokagathia and its topical usage. In conclusion, the questions are formed, the answers of the author are mostly subjective which gives some space for next discussions.

  6. Ausubel's Theory of Learning and its Application to Introductory Science Part II--Primary Science: An Ausubelian View.

    Science.gov (United States)

    McClelland, J. A. G.

    1982-01-01

    In part 1 (SE 532 193) an outline of Ausubel's learning theory was given. The application of the theory to elementary school science is addressed in this part, clarifying what elementary science means and indicating how it relates to what may be expected to be already known by elementary school children. (Author/JN)

  7. Egyptian Mythological Manuals

    DEFF Research Database (Denmark)

    Jørgensen, Jens Kristoffer Blach

    From the hands of Greek mythographers a great number of myths have survived along with philosophical discussions of their meaning and relevance for the Greeks. It is little known that something similar existed in ancient Egypt where temple libraries and archives held scholarly literature used...... techniques used in the Tebtunis Mythological Manual (Second century CE) and the Mythological Manual of the Delta (Sixth century BCE) and the place of these manuals within the larger corpus of priestly scholarly literature from ancient Egypt. To organize the wealth of local myths the manuals use model...... by the native priesthood, much of which has only been published in recent years. As part of this corpus of texts, the ancient Egyptian mythological manuals offer a unique perspective on how the Egyptian priesthood structured and interpreted Egyptian myths. The thesis looks at the different interpretative...

  8. Geographical thinking in nursing inquiry, part two: performance, possibility, and non-representational theory.

    Science.gov (United States)

    Andrews, Gavin J

    2017-04-01

    Part one in this two paper series reviewed the nature of geographical thinking in nursing research thus far. The current paper builds on it by looking forwards and providing a particular vision for future research. It argues that it is time to once again look to the parent discipline of human geography for inspiration, specifically to its turn towards non-representational theory, involving an emphasis on life that onflows prior to meaning, significance, and full cognition; on life's 'taking-place'. The paper introduces this way of viewing and animating the world. Some potential connections to nursing research and practice are suggested, as are some specific avenues for future inquiry. Explained is how, through non-representational theory, nursing might be re-imagined as something that reveals space-time. © 2016 John Wiley & Sons Ltd.

  9. Tie-Up Cycles in Long-Term Mating. Part I: Theory

    Directory of Open Access Journals (Sweden)

    Lorenza Lucchi Basili

    2016-05-01

    Full Text Available In this paper, we propose a new approach to couple formation and dynamics that abridges findings from sexual strategies theory and attachment theory to develop a framework where the sexual and emotional aspects of mating are considered in their strategic interaction. Our approach presents several testable implications, some of which find interesting correspondences in the existing literature. Our main result is that, according to our approach, there are six typical dynamic interaction patterns that are more or less conducive to the formation of a stable couple, and that set out an interesting typology for the analysis of real (as well as fictional, as we will see in the second part of the paper mating behaviors and dynamics.

  10. UNSAT-H Version 3.0: Unsaturated Soil Water and Heat Flow Model Theory, User Manual, and Examples

    Energy Technology Data Exchange (ETDEWEB)

    MJ Fayer

    2000-06-12

    The UNSAT-H model was developed at Pacific Northwest National Laboratory (PNNL) to assess the water dynamics of arid sites and, in particular, estimate recharge fluxes for scenarios pertinent to waste disposal facilities. During the last 4 years, the UNSAT-H model received support from the Immobilized Waste Program (IWP) of the Hanford Site's River Protection Project. This program is designing and assessing the performance of on-site disposal facilities to receive radioactive wastes that are currently stored in single- and double-shell tanks at the Hanford Site (LMHC 1999). The IWP is interested in estimates of recharge rates for current conditions and long-term scenarios involving the vadose zone disposal of tank wastes. Simulation modeling with UNSAT-H is one of the methods being used to provide those estimates (e.g., Rockhold et al. 1995; Fayer et al. 1999). To achieve the above goals for assessing water dynamics and estimating recharge rates, the UNSAT-H model addresses soil water infiltration, redistribution, evaporation, plant transpiration, deep drainage, and soil heat flow as one-dimensional processes. The UNSAT-H model simulates liquid water flow using Richards' equation (Richards 1931), water vapor diffusion using Fick's law, and sensible heat flow using the Fourier equation. This report documents UNSAT-H .Version 3.0. The report includes the bases for the conceptual model and its numerical implementation, benchmark test cases, example simulations involving layered soils and plants, and the code manual. Version 3.0 is an, enhanced-capability update of UNSAT-H Version 2.0 (Fayer and Jones 1990). New features include hysteresis, an iterative solution of head and temperature, an energy balance check, the modified Picard solution technique, additional hydraulic functions, multiple-year simulation capability, and general enhancements.

  11. Fiscal 1999 technological survey report. Part 1. Applied technology for measuring human sense (Human sense measuring manual - human sense evaluation index guideline); Ningen kankaku keisoku manual. 1. Ningen kankaku hyoka shihyo guide line

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A method of measuring/evaluating a mental and physical state by means of physiological information developed by a project was compiled into a 'guide book', as was a method of evaluating adaptability to the environment or products; and, this manual was prepared for the purpose of improving the adaptability of human beings to products by making use of the guide book widely in the field of industrial manufacturing. Described in the part 1 are a method of evaluating human mind and body by the measurement of physiological quantity, a method of evaluating mental and physical adaptability from the element of environmental physics such as vision, sound and warmth, and a method of evaluating adaptability concerning utilization of machines and equipment, as 'human sense evaluation indexes'. The chapter 1 is the index of physiological/psychological state (stress evaluation index, fatigue/awakening evaluation index), the chapter 2 is an environmental/psychological index (overall environmental evaluation index, visual environmental effect index, sound/vibration environmental evaluation index, thermal environmental evaluation index), the chapter 3 is an adaptability evaluation index of products and the like (adaptability evaluation index by form and movement, evaluation index for operability of equipment for example), and the chapter 4 is the guideline (of environmental design and of product design). (NEDO)

  12. Numerical analysis of stiffened shells of revolution. Volume 3: Users' manual for STARS-2B, 2V, shell theory automated for rotational structures, 2 (buckling, vibrations), digital computer programs

    Science.gov (United States)

    Svalbonas, V.

    1973-01-01

    The User's manual for the shell theory automated for rotational structures (STARS) 2B and 2V (buckling, vibrations) is presented. Several features of the program are: (1) arbitrary branching of the shell meridians, (2) arbitrary boundary conditions, (3) minimum input requirements to describe a complex, practical shell of revolution structure, and (4) accurate analysis capability using a minimum number of degrees of freedom.

  13. Partíal amendments to the Restauro theory (II Value & values.

    Directory of Open Access Journals (Sweden)

    Alfonso Jiménez

    1998-04-01

    Full Text Available The architect Alfonso Jiménez presents the second part of the article published in the 4th edition of LOGGIA . Here he expands his opinions on the Restauro theory with reflections about industrial reproduction of artworks, the methodology used in interventions on masonry constructions and exclusions from the concepts of functionality and the artistic dimension of the intervention. Finally he analyses in depth the reach and influence of the concept of value in all its facets throughout the history of restoration

  14. Theory of non-local point transformations - Part 2: General form and Gedanken experiment

    CERN Document Server

    Tessarotto, Massimo

    2016-01-01

    The problem is posed of further extending the axiomatic construction proposed in Part 1 for non-local point transformations mapping in each other different curved space times. The new transformations apply to curved space times when expressed in arbitrary coordinate systems. It is shown that the solution permits to achieve an ideal (Gedanken) experiment realizing a suitable kind of phase-space transformation on point-particle classical dynamical systems. Applications of the theory are discussed both for diagonal and non-diagonal metric tensors.

  15. Slag-metal reactions during welding: Part III. Verification of the Theory

    Science.gov (United States)

    Mitra, U.; Eagar, T. W.

    1991-02-01

    A previously developed kinetic model of alloy transfer (Part II)[1] is tested experimentally for transfer of Mn, Si, Cr, P, S, Ni, Cu, and Mo. The results show very good agreement between theory and experiment. The transfer of carbon and oxygen is also discussed. It is shown that the transfer of oxygen into the weld metal occurs in the zone of droplet reactions, whereas oxygen is lost by formation and separation of inclusions in the solidifying weld pool. Methods of applying this analysis to multipass welds and active fluxes containing ferroalloy additions are also described.

  16. Manual for best practice for emergency response procedures, part 2: the management of inrushes, fires, explosions and other emergencies.

    CSIR Research Space (South Africa)

    Spencer, KC

    2000-02-01

    Full Text Available FOR EMERGENCY RESPONSE PROCEDURES PART 2 THE MANAGEMENT OF INRUSHES, FIRES, EXPLOSIONS AND OTHER EMERGENCIES Authors: K C Spencer, D M Walters, T P T Page and A G du Plessis. Research Agency: Turgis Technology (Pty) Ltd. Project No. COL 605 Date...-planning .................................................................................................................2 2.2 Awareness of the emergency situation..........................................................................2 2.3 Self contained self rescuers (SCSRs) ...........................................................................3 2...

  17. Coupled Cluster in Condensed Phase. Part II: Liquid Hydrogen Fluoride from Quantum Cluster Equilibrium Theory.

    Science.gov (United States)

    Spickermann, Christian; Perlt, Eva; von Domaros, Michael; Roatsch, Martin; Friedrich, Joachim; Kirchner, Barbara

    2011-04-12

    Treating the bulk phase with high-level ab initio methods, such as coupled cluster, is a nontrivial task because of the computational costs of these electronic structure methods. In this part of our hydrogen fluoride study we make use of the quantum cluster equilibrium method, which employs electronic structure input of small clusters and combines it with simple statistical mechanics in order to describe condensed phase phenomena. If no parameter adjustment is applied, then the lower quantum chemical methods, such as density functional theory in conjunction with the generalized gradient approximation, provide wrong results in accordance with the description of the strength of the interaction in the clusters. While density functional theory describes the liquid phase too dense due to overbinding of the clusters, the coupled cluster method and the perturbation theory at the complete basis set limit agree well with experimental observations. If we allow the two parameters in the quantum cluster equilibrium method to vary, then these are able to compensate the overbinding, thereby leading to very good agreement with experiment. Correlated methods in combination with small basis sets giving rise to too weakly bound clusters cannot reach this accuracy even if the parameters are flexible. Only at the complete basis set limit, the performance of the correlated methods is again excellent.

  18. Husserl's theory of wholes and parts and the methodology of nursing research.

    Science.gov (United States)

    Schultz, Gary S; Cobb-Stevens, Richard

    2004-10-01

    Whenever the name Edmund Husserl appears in the context of nursing research, what correctly comes to mind is the phenomenological approach to qualitative methodology. Husserl is not only considered the founder of phenomenology, but his broad concept development also contributed to the demise of positivism and inspired fruitful approaches to the social sciences. In this spirit of inspiration, it must be expressed that Husserl's theory of wholes and parts, and particularly his differentiation of parts into "pieces" and "moments", is very helpful in guiding the selection of research methods across the board in nursing science. The purpose of this paper is to highlight a frame of reference for nursing researchers to use in examining the essential nature of that which is being studied. This frame of reference is the Husserlian philosophy of "pieces" and "moments" in relation to the whole. "Pieces" are independent parts of the whole that are subject to isolability in study, whereas "moments" are nonindependent parts, which cannot be detached, presented, or studied apart from the whole. The intent is to propose this frame of reference as a philosophical base from which nursing researchers may better select among paradigms and methodological approaches in regard to the essential nature ("pieces" or "moments") of that which they are researching.

  19. Relatives in end-of-life care--part 2: a theory for enabling safety.

    Science.gov (United States)

    Ohlén, Joakim; Andershed, Birgitta; Berg, Christina; Frid, Ingvar; Palm, Carl-Axel; Ternestedt, Britt-Marie; Segesten, Kerstin

    2007-02-01

    To develop a goal-oriented praxis theory for enabling safety for relatives when an adult or older patient is close to end-of-life. This is the second part of a project focusing on the situation and needs of relatives in end-of-life care. Our interpretation of the existing corpus of knowledge pertaining to the needs of close relatives in this situation showed the significance of relatives' need for safety. The theory was developed step-by-step, through triangulation of critical review of empirical research in the field, our own clinical experiences from end-of-life care, renewed literature searches and theoretical reasoning. The foundation for the theory is taken from the ethical intention of the philosopher Paul Ricoeur. From this, the theory focuses on relatives in the context of end-of-life care with the goal of enabling safety. This is proposed by four aphorisms functioning as safety enablers and these are directed towards the professional's approach and attitude, the relative's concern for the patient, the specific situation for the relative and the patient's end-of-life period as a period in the life of the relative. Implications for end-of-life practice are considered and include aspects for promotion of just institutions in end-of-life care, the significance of negotiated partnership in end-of-life care, enabling safety for relatives living in existential and practical uncertainty in connection with end-of-life care and diversity of relatives' preferences as they live through this particular period.

  20. Theory of mind deficits partly mediate impaired social decision-making in schizophrenia.

    Science.gov (United States)

    Yang, Liuqing; Li, Peifu; Mao, Haiying; Wang, Huiling; Shu, Chang; Bliksted, Vibeke; Zhou, Yuan

    2017-05-05

    Using paradigms from game theory, researchers have reported abnormal decision-making in social context in patients with schizophrenia. However, less is known about the underpinnings of the impairment. This study aimed to test whether theory of mind (ToM) deficits and/or neurocognitive dysfunctions mediate impaired social decision-making in patients with schizophrenia. We compared thirty-five patients with schizophrenia to thirty-eight matched healthy controls with regard to social decision-making using the mini Ultimatum Game (mini UG), a paradigm from game theory. Additionally, we assessed ToM using the Theory of Mind Picture Stories Task, a mental state attribution task, and assessed neurocognition using the Brief Assessment of Cognition in Schizophrenia. Mediation analyses were performed on the data. In contrast to the behavioral pattern of healthy controls in the mini UG, the patients with schizophrenia significantly accepted more disadvantageous offers and rejected more advantageous offers, and showed reduced sensitivity to the fairness-related context changes in the mini UG. Impaired ToM and neurocognition were also found in the patients. Mediation analyses indicated that ToM but not neurocognition partially mediated the group differences on the disadvantageous and advantageous offers in the mini UG. Patients with schizophrenia exhibited impaired social decision-making. This impairment can be partly explained by their ToM deficits rather than neurocognitive deficits. However, the exact nature of the ToM deficits that mediate impaired social decision-making needs to be identified in future.

  1. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ``big picture`` and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a `` top down`` approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ``top down`` approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers.

  2. Quality Manual

    Science.gov (United States)

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  3. LOLA SYSTEM: A code block for nodal PWR simulation. Part. I - Simula-3 Code

    Energy Technology Data Exchange (ETDEWEB)

    Aragones, J. M.; Ahnert, C.; Gomez Santamaria, J.; Rodriguez Olabarria, I.

    1985-07-01

    Description of the theory and users manual of the SIMULA-3 code, which is part of the core calculation system by nodal theory in one group, called LOLA SYSTEM. SIMULA-3 is the main module of the system, it uses a modified nodal theory, with interface leakages equivalent to the diffusion theory. (Author) 4 refs.

  4. Cultural landscape in theory. 2nd Part: Development of truth – paths and goals

    Directory of Open Access Journals (Sweden)

    Borut Juvanec

    2002-01-01

    Full Text Available The city grows from the seed to the core. The historical core is the central part with historical significance, around which other programmes are aligned. Possibilities define growth and density of a city, but this is the source of problems. Growth is influenced by activities moving, changes in social and political life, but also important elements of culture and sports. Visibility, sometimes termed beauty, is only the external layer of the interior, the essence itself. A functioning village cannot be ugly. Fire, the fireplace, house, home, village, city (survival, needs and possibilities are closer to the circle and theory, than can be expected. Growth of architecture from the detail to spatial planning is the fruit of human balancing only in detail. Cities grow according to their own logic. The role of professions is therefore limited only to the establishment of strategies and controlling their growth. Things are much simpler, than we can imagine.

  5. Element Pattern of an Axial Dipole in a Cylindrical Phased Array. Part 1. Theory. Part 2. Element Design and Experiments. Volume 1

    Science.gov (United States)

    1986-10-01

    PART I: Theory; PART I/: Element Design and Experiments Boris Tomasic, Alexander Hessel and John C. Herper 1l~* . - APPROVED FOR PUBLIC RELEASE...Clausification) Element Pattern of an Axial Dipole (cont.) 61102F 2305 03 03 12. PERSONAL AUTHOR(S) Boris Tomasic, Alexander Hessel , and John C. Herper...the Electromagnetic Sciences Division, Rome Air De- velopment Center, Hanscom AFB, MA 01731. Alexander Hessel is with the Polytechnic University, Route

  6. The new production theory for health care through clinical reengineering: a study of clinical guidelines--Part II.

    Science.gov (United States)

    Sharp, J R

    1995-01-01

    In Part I of this two-part article, in the December 1994 issue of the journal, the author discussed the manufacturing theories of Peter Drucker in terms of their applicability for the health care field. He concluded that Drucker's four principles and practices of manufacturing--statistical quality control, manufacturing accounting, modular organization, and systems approach--do have application to the health care system. Clinical guidelines, a variation on the Drucker theory, are a specific example of the manufacturing process in health. The performance to date of some guidelines and their implications for the health care reform debate are discussed in Part II of the article.

  7. Attenuation of wave-induced groundwater pressure in shallow water. Part 2. Theory

    Directory of Open Access Journals (Sweden)

    Stanisław R. Massel

    2005-09-01

    Full Text Available In this Part 2 of the paper (Part 1 was published by Massel et al. 2004 an exact close-form solution for the pore-water pressure component and velocity circulation pattern induced by surface waves is developed. This comprehensive theoretical model, based on Biot's theory, takes into account soil deformations, volume change and pore-water flow. The calculations indicate that for the stiffness ratio G/E'w ≥ 100, the vertical distribution of the pore pressure becomes very close to the Moshagen & Tørum (1975 approach, when the soil is rigid and the fluid is incompressible.     The theoretical results of the paper have been compared with the experimental data collected during the laboratory experiment in the Large Wave Channel in Hannover (see Massel et al. 2004 and showed very good agreement. The apparent bulk modulus of pore water was not determined in the experiment but was estimated from the best fit of the experimental pore-water pressure with the theoretical one. In the paper only a horizontal bottom is considered and the case of an undulating bottom will be dealt with in another paper.

  8. Long-term solar activity and terrestrial connections. Part I: theory

    Directory of Open Access Journals (Sweden)

    N. D. Diamantides

    1998-05-01

    Full Text Available The research task described herein aims at the structuring of an analytical tool that traces the time course of geophysical phenomena, regional or global, and compares it to the course of long-term solar conditions, long-term meaning decades or a few centuries. The model is based on the premise that since in a last analysis the preponderance of atmospheric, hydrospheric, and, possibly, some aspects of geospheric phenomena are, or have been, powered by energy issuing from the sun – either now or in the past, the long-term behavior of such phenomena is ultimately "connected" to long-term changes occurring in the sun itself. Accordingly, the proposed research firstly derives and models a stable surrogate pattern for the long-term solar activity, secondly introduces a transfer-function algorithm for modeling the connection between the surrogate and terrestrial phenomena viewed as partners in the connection, and thirdly probes the connection outcome for episodic or unanticipated effects that may arise due to the fact that in the present context, the connection, should it exist, is very likely nonlinear. Part I of the study presents the theory of the concept, while Part II demonstrates the concept's pertinence to a number of terrestrial phenomena.Key words. Solar activity · Kolmogorov algorithm

  9. Structural theory and thermoeconomic diagnosis. Part 2: Application to an actual power plant

    Energy Technology Data Exchange (ETDEWEB)

    Valero, A.; Lerch, F.; Serra, L.; Royo, J. [University of Zaragoza (Spain). CIRCE, Department of Mechanical Engineering

    2002-08-01

    In this second part of the paper, the new advances on thermoeconomic diagnosis presented in the part 1 are applied to the Escucha power plant, which is a 160 MW conventional coal fired power plant sited in Aragon (Spain). As a result the validity of the methodology is proved and quantified. The methodology is validated using a specific simulator of the Esucha power plant cycle, mainly based on [ASME Power Division, Paper no. 62-WA-209, 1974] method. This simulator reproduces with high accuracy the cycle behavior for different operating conditions, either in design and in off design conditions. The error is lower than 1% in most of cases. The simulated results, i.e. temperatures, pressures, mass flow rates, power and so on, are considered as plant measured and validated values. In this way all measurement uncertainties are avoided. A complete thermoeconomic diagnosis is presented applying the Structural Theory of Thermoeconomics. The impact of the component inefficiencies on the fuel plant consumption, and the effect of a component inefficiency (intrinsic malfunction) on the rest of the plant components (induced malfunctions and dysfunctions), are analyzed and quantified. The methodology is validated quantifying its accuracy. (author)

  10. Structural theory and thermoeconomic diagnosis Part II: Application to an actual power plant

    Energy Technology Data Exchange (ETDEWEB)

    Valero, A.; Lerch, F.; Serra, L.; Royo, J. [Univ Zaragoza, Zaragoza (Spain). Dept. of Mechanical Engineers

    2002-08-01

    In this second part of the paper, the new advances on thermoeconomic diagnosis presented in the part I are applied to the Escucha power plant, which is a 160 MW conventional coal fired power plant sited in Aragon (Spain). As a result the validity of the methodology is proved and quantified. The methodology is validated using a specific simulator of the Escucha power plant cycle. This simulator reproduces with high accuracy the cycle behavior for different operating conditions, either in design or in off design conditions. The error is lower than 1% in most of cases. The simulated results, i.e. temperatures pressures, mass flow rates, power and so on, are considered as plant measured and validated values thus avoiding measurement uncertainties. A complete thermoeconomic diagnosis is presented applying the Structural Theory of Thermoeconomics. The impact of the component inefficiencies on the fuel plant consumption, and the effect of a component inefficiency (intrinsic malfunction) on the rest of the plant components (induced malfunctions and dysfunctions), are analyzed and quantified. The methodology is validated quantifying its accuracy.

  11. Generating Vegetation Leaf Area Index Earth System Data Record from Multiple Sensors. Part 1; Theory

    Science.gov (United States)

    Ganguly, Sangram; Schull, Mitchell A.; Samanta, Arindam; Shabanov, Nikolay V.; Milesi, Cristina; Nemani, Ramakrishna R.; Knyazikhin, Yuri; Myneni, Ranga B.

    2008-01-01

    The generation of multi-decade long Earth System Data Records (ESDRs) of Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation absorbed by vegetation (FPAR) from remote sensing measurements of multiple sensors is key to monitoring long-term changes in vegetation due to natural and anthropogenic influences. Challenges in developing such ESDRs include problems in remote sensing science (modeling of variability in global vegetation, scaling, atmospheric correction) and sensor hardware (differences in spatial resolution, spectral bands, calibration, and information content). In this paper, we develop a physically based approach for deriving LAI and FPAR products from the Advanced Very High Resolution Radiometer (AVHRR) data that are of comparable quality to the Moderate resolution Imaging Spectroradiometer (MODIS) LAI and FPAR products, thus realizing the objective of producing a long (multi-decadal) time series of these products. The approach is based on the radiative transfer theory of canopy spectral invariants which facilitates parameterization of the canopy spectral bidirectional reflectance factor (BRF). The methodology permits decoupling of the structural and radiometric components and obeys the energy conservation law. The approach is applicable to any optical sensor, however, it requires selection of sensor-specific values of configurable parameters, namely, the single scattering albedo and data uncertainty. According to the theory of spectral invariants, the single scattering albedo is a function of the spatial scale, and thus, accounts for the variation in BRF with sensor spatial resolution. Likewise, the single scattering albedo accounts for the variation in spectral BRF with sensor bandwidths. The second adjustable parameter is data uncertainty, which accounts for varying information content of the remote sensing measurements, i.e., Normalized Difference Vegetation Index (NDVI, low information content), vs. spectral BRF (higher

  12. Grizzly Usage and Theory Manual

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, B. W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Backman, M. [Univ. of Tennessee, Knoxville, TN (United States); Chakraborty, P. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Schwen, D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Y. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Huang, H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bai, X. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jiang, W. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    Grizzly is a multiphysics simulation code for characterizing the behavior of nuclear power plant (NPP) structures, systems and components (SSCs) subjected to a variety of age-related aging mechanisms. Grizzly simulates both the progression of aging processes, as well as the capacity of aged components to safely perform. This initial beta release of Grizzly includes capabilities for engineering-scale thermo-mechanical analysis of reactor pressure vessels (RPVs). Grizzly will ultimately include capabilities for a wide range of components and materials. Grizzly is in a state of constant development, and future releases will broaden the capabilities of this code for RPV analysis, as well as expand it to address degradation in other critical NPP components.

  13. Noosphere as Optimal Control. Part 1. Control Theory, Geosphere and Biosphere

    Directory of Open Access Journals (Sweden)

    Boris Balter

    2017-09-01

    Full Text Available The conceptual system developed in optimal control theory for technical purposes is used as a philosophical instrument applied to cyclic information processes, which are expected to be the basis of noosphere. Noosphere was perceived by the founding fathers of this concept, Vladimir Vernadsky, Pierre Teilhard de Chardin, e.a. as an outgrowth of the evolutionary process, which begins with cosmogenesis and proceeds through geosphere and biosphere. We attempt to apply the optimal control concepts to all three levels — geospheric, biospheric, and noospheric — due to their having a common structure of information processes (or entropic processes considered as proto-information. These processes include homeostasis, accumulation and expenditure of information, formation of hierarchical information structures, evolution involving the breaks of homeostasis etc. In noosphere, controlled system may have the same informational capabilities as controlling system, so that the term “dialog” is more adequate; in this case, we extend optimal control description to game theory. The cyclic, feedback logic of optimal control seems better adapted to noospheric processes than usual cause-eff ect logic. The fi rst part of the paper considers the geospheric and biospheric level. We introduce the basic notions characterizing optimal control cycle: duality of observation and control, hierarchy of models, active sounding, balance of information infl ow and outfl ow, optimized criterion, networked (distributed control, etc. Then, natural homeostases at the geospheric level are considered as a form of self-regulation having specifi c optimized criteria. The constitutive feature of this level is the absence of information processing in the strict sense: its place is taken by entropic processes. Therefore, no goal can exist at this level, and we consider it as a part of cosmogenesis, which is allegedly goalless/meaningless. We discuss the anthropic principle as a means

  14. The application of fuzzy theory for the control of weld line positions in injection-molded part.

    Science.gov (United States)

    Chen, Mei-Yung; Tzeng, Huan-Wen; Chen, Yi-Cheng; Chen, Shia-Chung

    2008-01-01

    This research proposes the fuzzy theory for the control of weld lines in plastic injection molding. The weld line occurs as a result of geometrical changes in molded parts in the injection molding process. The weld line is one of the defects present in plastic injection-molded parts; the line affects the quality of parts as well as the strength of the products. In the present study, fuzzy theory was applied in the design of injection molding. First, expert experiences were transformed into IF approximately THEN approximately rules to establish the knowledge base for developing fuzzy inference rules. The rules were then used to adjust the molding parameters, which in turn were applied to control the weld line position in the injection molding process. The results indicate that fuzzy theory exhibited favorable applicability in the control of the weld line as well as decreased the simulation time, thereby accelerating the design process of injection molding.

  15. Dental Chairside Technique. Student's Manual.

    Science.gov (United States)

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  16. Child Nutrition Programs. Administrative Manual.

    Science.gov (United States)

    Utah State Office of Education, Salt Lake City.

    Recognizing the importance of efficient and effective program administration for the success of Utah's Child Nutrition Programs, the State Office of Education developed a manual to assist local program administrators in using the U.S. Department of Agriculture's (USDA's) programs. This document contains Part 1 of the manual's four interrelated…

  17. GED Home Study Manual.

    Science.gov (United States)

    Dolan, Margaret M.; And Others

    This manual is intended as a working guide for adult educators who are planning to introduce General Educational Development (GED) home study programs into their local districts. The guide is a compilation of the experiences and observations of the Norwich Office of Adult Education, which is a part of the Southeastern Connecticut Adult Education…

  18. Performance Assessment Design Principles Gleaned from Constructivist Learning Theory (Part 2)

    Science.gov (United States)

    Zane, Thomas W.

    2009-01-01

    Just as objectivist theories have provided foundations for traditional tests, constructivist theories can offer foundations for performance assessment design and development methods. The tenets and principles embedded in various learning theories provide a solid foundation that can be combined with psychometric principles to help assessment…

  19. Biosafety Manual

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  20. Radiological control manual. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  1. A finite state, finite memory minimum principle, part 2. [a discussion of game theory, signaling, stochastic processes, and control theory

    Science.gov (United States)

    Sandell, N. R., Jr.; Athans, M.

    1975-01-01

    The development of the theory of the finite - state, finite - memory (FSFM) stochastic control problem is discussed. The sufficiency of the FSFM minimum principle (which is in general only a necessary condition) was investigated. By introducing the notion of a signaling strategy as defined in the literature on games, conditions under which the FSFM minimum principle is sufficient were determined. This result explicitly interconnects the information structure of the FSFM problem with its optimality conditions. The min-H algorithm for the FSFM problem was studied. It is demonstrated that a version of the algorithm always converges to a particular type of local minimum termed a person - by - person extremal.

  2. Aircraft operations management manual

    Science.gov (United States)

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  3. Author's Response to Commentaries on: "An Interpretation of Part of Gilbert Gottlieb's Legacy: Developmental Systems Theory Contra Developmental Behavior Genetics"

    Science.gov (United States)

    Molenaar, Peter C. M.

    2015-01-01

    In this article, Peter Molenaar responds to three commentaries (this issue) on his article, "An Interpretation of Part of Gilbert Gottlieb's Legacy: Developmental Systems Theory Contra Developmental Behavior Genetics." He addresses aspects of relational developmental systems (RDS) mentioned and questions raised in each of the…

  4. Theory and praxis of map analsys in CHEF part 2: Nonlinear normal form

    Energy Technology Data Exchange (ETDEWEB)

    Michelotti, Leo; /FERMILAB

    2009-04-01

    This is the second of three memos describing how normal form map analysis is implemented in CHEF. The first [1] explained the manipulations required to assure that initial, linear transformations preserved Poincare invariants, thereby confirming correct normalization of action-angle coordinates. In this one, the transformation will be extended to nonlinear terms. The third, describing how the algorithms were implemented within the software of CHEF's libraries, most likely will never be written. The first section, Section 2, quickly lays out preliminary concepts and relationships. In Section 3, we shall review the perturbation theory - an iterative sequence of transformations that converts a nonlinear mapping into its normal form - and examine the equation which moves calculations from one step to the next. Following that is a section titled 'Interpretation', which identifies connections between the normalized mappings and idealized, integrable, fictitious Hamiltonian models. A final section contains closing comments, some of which may - but probably will not - preview work to be done later. My reasons for writing this memo and its predecessor have already been expressed. [1] To them can be added this: 'black box code' encourages users to proceed with little or no understanding of what it does or how it operates. So far, CHEF has avoided this trap admirably by failing to attract potential users. However, we reached a watershed last year: even I now have difficulty following the software through its maze of operations. Extensions to CHEF's physics functionalities, software upgrades, and even simple maintenance are becoming more difficult than they should. I hope these memos will mark parts of the maze for easier navigation in the future. Despite appearances to the contrary, I tried to include no (or very little) more than the minimum needed to understand what CHEF's nonlinear analysis modules do.1 As with the first memo, material

  5. Theory and praxis pf map analsys in CHEF part 1: Linear normal form

    Energy Technology Data Exchange (ETDEWEB)

    Michelotti, Leo; /Fermilab

    2008-10-01

    This memo begins a series which, put together, could comprise the 'CHEF Documentation Project' if there were such a thing. The first--and perhaps only--three will telegraphically describe theory, algorithms, implementation and usage of the normal form map analysis procedures encoded in CHEF's collection of libraries. [1] This one will begin the sequence by explaining the linear manipulations that connect the Jacobian matrix of a symplectic mapping to its normal form. It is a 'Reader's Digest' version of material I wrote in Intermediate Classical Dynamics (ICD) [2] and randomly scattered across technical memos, seminar viewgraphs, and lecture notes for the past quarter century. Much of its content is old, well known, and in some places borders on the trivial.1 Nevertheless, completeness requires their inclusion. The primary objective is the 'fundamental theorem' on normalization written on page 8. I plan to describe the nonlinear procedures in a subsequent memo and devote a third to laying out algorithms and lines of code, connecting them with equations written in the first two. Originally this was to be done in one short paper, but I jettisoned that approach after its first section exceeded a dozen pages. The organization of this document is as follows. A brief description of notation is followed by a section containing a general treatment of the linear problem. After the 'fundamental theorem' is proved, two further subsections discuss the generation of equilibrium distributions and issue of 'phase'. The final major section reviews parameterizations--that is, lattice functions--in two and four dimensions with a passing glance at the six-dimensional version. Appearances to the contrary, for the most part I have tried to restrict consideration to matters needed to understand the code in CHEF's libraries.

  6. Slag-metal reactions during welding: Part I. Evaluation and reassessment of existing theories

    Science.gov (United States)

    Mitra, U.; Eagar, T. W.

    1991-02-01

    A critical review of current thermodynamic theories of slag-metal reactions is presented. A series of preliminary experiments indicates that the previously proposed droplet theory is incorrect and the primary reactions controlling Mn, Si, and Cr content occur in the weld pool. In addition, these experiments show that the net transfer of oxygen is independent of the transfer of Mn and Si.

  7. The use and abuse of attachment theory in clinical practice with maltreated children, part II: treatment.

    Science.gov (United States)

    Allen, Brian

    2011-01-01

    Recent years have witnessed a growing debate about the role of attachment theory in the treatment of maltreated children. Many professional organizations have issued statements against physically restraining children as some attachment therapists promote; however, often lost in these debates is the fundamental issue of what attachment theory and research proposes as the appropriate form of treatment. Given that these attachment therapies are often directed toward maltreated children, it becomes critical for clinicians working with abused and neglected children to understand these issues and recognize unethical and dangerous treatments. This article provides a summary of the theoretical and empirical bases for the use of attachment theory in the treatment of maltreated school-age children, an examination of the ways questionable approaches to treatment have misinterpreted and misapplied attachment theory, and a conceptualization of attachment-based intervention grounded in current theory and research.

  8. Development of a guidance manual for the identification and assessment of interactions as part of Environmental Impact Assessment; Entwicklung einer Arbeitsanleitung zur Beruecksichtigung der Wechselwirkungen in der Umweltvertraeglichkeitspruefung

    Energy Technology Data Exchange (ETDEWEB)

    Rassmus, J.; Bruening, H.; Kleinschmidt, V.; Reck, H.; Dierssen, K.; Bonk, A. [Kiel Univ. (Germany). Oekologie-Zentrum

    2001-03-01

    The objective of the project was the development of a practice-oriented guidance manual for the identification and assessment of interactions as part of EIA. The guidance manual is to assist developers and their consultants in identifying the effects of a project on interactions and adequately describing them in the application dossier and to support the authorities in subsequent assessment. Based inter alia on a review of relevant literature and through the performance of workshops, relevant legal principles and scientific knowledge (notably current knowledge from ecosystem research), guidelines, procedural instructions and similar documents from Germany and elsewhere as well as the approaches applied in EIA practice were evaluated and further developed. On this basis, a definition of 'interactions' was in the project, which defines interactions within the meaning of the Eu's EIA Directive and Art. 2 of the German Environmental Impact Assessment Act as processes which occur in the environment. The analysis of effect chains and webs, as often carried out in EIA practice to date, already enables an extensive identification and characterisation of processes/interactions, since the elements of the chains and webs are interlinked by processes. Here, the guidance manual developed in the project goes one step farther in that it recommends a procedure for the systematic analysis of effect chains and webs, with defined interfaces for data delivery from one specialist to another which are situated at the points where these chains or webs meet. The effects of a project on interactions, as identified using the above procedure, are described in chapters specific to individual protected assets and subsequently evaluated using the conventional approach which involves the application of assessment standards (e.g., limit values laid down in the various specialised laws, precautionary guide and threshold values) according to current knowledge. As an additional module

  9. On a nascent mathematical-physical latency-information theory, part II: the revelation of guidance theory for intelligence and life system designs

    Science.gov (United States)

    Feria, Erlan H.

    2009-05-01

    Since its introduction more than six decades ago by Claude E. Shannon information theory has guided with two performance bounds, namely source-entropy H and channel capacity C, the design of sourced intelligence-space compressors for communication systems, where the units of intelligence-space are 'mathematical' binary digit (bit) units of a passing of time uncertainty nature. Recently, motivated by both a real-world radar problem treated in the first part of the present paper series, and previous uncertainty/certainty duality studies of digital-communication and quantizedcontrol problems by the author, information theory was discovered to have a 'certainty' time-dual that was named latency theory. Latency theory guides with two performance bounds, i.e. processor-ectropy K and sensor consciousness F the design of processing intelligence-time compressors for recognition systems, where the units of intelligence-time are 'mathematical' binary operator (bor) units of a configuration of space certainty nature. Furthermore, these two theories have been unified to form a mathematical latency-information theory (M-LIT) for the guidance of intelligence system designs, which has been successfully applied to real-world radar. Also recently, M-LIT has been found to have a physical LIT (P-LIT) dual that guides life system designs. This novel physical theory addresses the design of motion life-time and retention life-space compressors for physical signals and also has four performance bounds. Two of these bounds are mover-ectropy A and channel-stay T for the design of motion life-time compressors for communication systems. An example of a motion life-time compressor is a laser system, inclusive of a network router for a certainty, or multi-path life-time channel. The other two bounds are retainer-entropy N and sensor scope I for the design of retention life-space compressors for recognition systems. An example of a retention life-space compressor is a silicon semiconductor

  10. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  11. Towards an integrative theory of consciousness: part 2 (an anthology of various other models).

    Science.gov (United States)

    De Sousa, Avinash

    2013-01-01

    The study of consciousness has today moved beyond neurobiology and cognitive models. In the past few years, there has been a surge of research into various newer areas. The present article looks at the non-neurobiological and non-cognitive theories regarding this complex phenomenon, especially ones that self-psychology, self-theory, artificial intelligence, quantum physics, visual cognitive science and philosophy have to offer. Self-psychology has proposed the need to understand the self and its development, and the ramifications of the self for morality and empathy, which will help us understand consciousness better. There have been inroads made from the fields of computer science, machine technology and artificial intelligence, including robotics, into understanding the consciousness of these machines and their implications for human consciousness. These areas are explored. Visual cortex and emotional theories along with their implications are discussed. The phylogeny and evolution of the phenomenon of consciousness is also highlighted, with theories on the emergence of consciousness in fetal and neonatal life. Quantum physics and its insights into the mind, along with the implications of consciousness and physics and their interface are debated. The role of neurophilosophy to understand human consciousness, the functions of such a concept, embodiment, the dark side of consciousness, future research needs and limitations of a scientific theory of consciousness complete the review. The importance and salient features of each theory are discussed along with certain pitfalls, if present. A need for the integration of various theories to understand consciousness from a holistic perspective is stressed.

  12. ON THE BIRTH AND DEVELOPMENT OF PSYCHOANALYTIC FIELD THEORY, PART 2.

    Science.gov (United States)

    Silverman, Martin A

    2017-10-01

    Advances in Contemporary Psychoanalytic Field Theory: Concept and Further Development. Edited by S. Montana Katz, Roosevelt Cassorla, and Giuseppe Civitarese. London/New York: Routledge, 2017. 212 pp. © 2017 The Psychoanalytic Quarterly, Inc.

  13. Attachment and the Child in School. Part I: Attachment Theory and the 'Dependent' Child.

    Science.gov (United States)

    Geddes, Heather

    2003-01-01

    This article uses the framework of attachment theory to describe a behavior pattern, the anxious resistant/ambivalent attachment pattern. Examples from educational practice illustrate the condition. Possible intervention approaches are suggested. (Contains references.) (Author/DB)

  14. Chemical Applications of Graph Theory: Part I. Fundamentals and Topological Indices.

    Science.gov (United States)

    Hansen, Peter J.; Jurs, Peter C.

    1988-01-01

    Explores graph theory and use of topological indices to predict boiling points. Lists three indices: Wiener Number, Randic Branching Index and Molecular Connectivity, and Molecular Identification numbers. Warns of inadequacies with stereochemistry. (ML)

  15. Towards An Integrative Theory Of Consciousness: Part 2 (An Anthology Of Various Other Models)

    OpenAIRE

    De Sousa, Avinash

    2013-01-01

    The study of consciousness has today moved beyond neurobiology and cognitive models. In the past few years, there has been a surge of research into various newer areas. The present article looks at the non-neurobiological and non-cognitive theories regarding this complex phenomenon, especially ones that self-psychology, self-theory, artificial intelligence, quantum physics, visual cognitive science and philosophy have to offer. Self-psychology has proposed the need to understand the self and ...

  16. Towards An Integrative Theory Of Consciousness: Part 2 (An Anthology Of Various Other Models)

    Science.gov (United States)

    De Sousa, Avinash

    2013-01-01

    The study of consciousness has today moved beyond neurobiology and cognitive models. In the past few years, there has been a surge of research into various newer areas. The present article looks at the non-neurobiological and non-cognitive theories regarding this complex phenomenon, especially ones that self-psychology, self-theory, artificial intelligence, quantum physics, visual cognitive science and philosophy have to offer. Self-psychology has proposed the need to understand the self and its development, and the ramifications of the self for morality and empathy, which will help us understand consciousness better. There have been inroads made from the fields of computer science, machine technology and artificial intelligence, including robotics, into understanding the consciousness of these machines and their implications for human consciousness. These areas are explored. Visual cortex and emotional theories along with their implications are discussed. The phylogeny and evolution of the phenomenon of consciousness is also highlighted, with theories on the emergence of consciousness in fetal and neonatal life. Quantum physics and its insights into the mind, along with the implications of consciousness and physics and their interface are debated. The role of neurophilosophy to understand human consciousness, the functions of such a concept, embodiment, the dark side of consciousness, future research needs and limitations of a scientific theory of consciousness complete the review. The importance and salient features of each theory are discussed along with certain pitfalls, if present. A need for the integration of various theories to understand consciousness from a holistic perspective is stressed. PMID:23678242

  17. Hamiltonian approach to GR - Part 2: covariant theory of quantum gravity

    Science.gov (United States)

    Cremaschini, Claudio; Tessarotto, Massimo

    2017-05-01

    A non-perturbative quantum field theory of General Relativity is presented which leads to a new realization of the theory of covariant quantum gravity (CQG-theory). The treatment is founded on the recently identified Hamiltonian structure associated with the classical space-time, i.e., the corresponding manifestly covariant Hamilton equations and the related Hamilton-Jacobi theory. The quantum Hamiltonian operator and the CQG-wave equation for the corresponding CQG-state and wave function are realized in 4-scalar form. The new quantum wave equation is shown to be equivalent to a set of quantum hydrodynamic equations which warrant the consistency with the classical GR Hamilton-Jacobi equation in the semiclassical limit. A perturbative approximation scheme is developed, which permits the adoption of the harmonic oscillator approximation for the treatment of the Hamiltonian potential. As an application of the theory, the stationary vacuum CQG-wave equation is studied, yielding a stationary equation for the CQG-state in terms of the 4-scalar invariant-energy eigenvalue associated with the corresponding approximate quantum Hamiltonian operator. The conditions for the existence of a discrete invariant-energy spectrum are pointed out. This yields a possible estimate for the graviton mass together with a new interpretation about the quantum origin of the cosmological constant.

  18. Conspiracy theories as part of history: The role of societal crisis situations.

    Science.gov (United States)

    van Prooijen, Jan-Willem; Douglas, Karen M

    2017-07-01

    In the present contribution, we examine the link between societal crisis situations and belief in conspiracy theories. Contrary to common assumptions, belief in conspiracy theories has been prevalent throughout human history. We first illustrate historical incidents suggesting that societal crisis situations-defined as impactful and rapid societal change that calls established power structures, norms of conduct, or even the existence of specific people or groups into question-have stimulated belief in conspiracy theories. We then review the psychological literature to explain why this is the case. Evidence suggests that the aversive feelings that people experience when in crisis-fear, uncertainty, and the feeling of being out of control-stimulate a motivation to make sense of the situation, increasing the likelihood of perceiving conspiracies in social situations. We then explain that after being formed, conspiracy theories can become historical narratives that may spread through cultural transmission. We conclude that conspiracy theories originate particularly in crisis situations and may form the basis for how people subsequently remember and mentally represent a historical event.

  19. Does ignorance of the whole imply ignorance of the parts? Large violations of noncontextuality in quantum theory.

    Science.gov (United States)

    Vidick, Thomas; Wehner, Stephanie

    2011-07-15

    A central question in our understanding of the physical world is how our knowledge of the whole relates to our knowledge of the individual parts. One aspect of this question is the following: to what extent does ignorance about a whole preclude knowledge of at least one of its parts? Relying purely on classical intuition, one would certainly be inclined to conjecture that a strong ignorance of the whole cannot come without significant ignorance of at least one of its parts. Indeed, we show that this reasoning holds in any noncontextual (NC) hidden-variable model (HV). Curiously, however, such a conjecture is false in quantum theory: we provide an explicit example where a large ignorance about the whole can coexist with an almost perfect knowledge of each of its parts. More specifically, we provide a simple information-theoretic inequality satisfied in any NC HV, but which can be arbitrarily violated by quantum mechanics.

  20. Research on the Selection Strategy of Green Building Parts Supplier Based on the Catastrophe Theory and Kent Index Method

    Directory of Open Access Journals (Sweden)

    Zhenhua Luo

    2016-01-01

    Full Text Available At present, the green building and housing industrialization are two mainstream directions in the real estate industry. The production of green building parts which combines green building and housing industrialization, two concepts, is to be vigorously developed. The key of quality assurance in the assembly project is choosing reliable and proper green building parts suppliers. This paper analyzes the inherent requirements of the green building, combined with the characteristics of the housing industrialization, and puts forward an evaluation index system of supplier selection for green building parts, which includes product index, enterprise index, green development index, and cooperation ability index. To reduce the influence of subjective factors, the improved method which merges Kent index method and catastrophe theory is applied to the green building parts supplier selection and evaluation. This paper takes the selection of the unit bathroom suppliers as an example, uses the improved model to calculate and analyze the data of each supplier, and finally selects the optimal supplier. With combination of the Kent index and the catastrophe theory, the result shows that it can effectively reduce the subjectivity of the evaluation and provide a basis for the selection of the green building parts suppliers.

  1. Unsteady Newton-Busemann flow theory. Part 2: Bodies of revolution

    Science.gov (United States)

    Hui, W. H.; Tobak, M.

    1981-01-01

    Newtonian flow theory for unsteady flow past oscillating bodies of revolution at very high Mach numbers is completed by adding a centrifugal force correction to the impact pressures. Exact formulas for the unsteady pressure and the stability derivatives are obtained in closed form and are applicable to bodies of revolution that have arbitrary shapes, arbitrary thicknesses, and either sharp or blunt noses. The centrifugal force correction arising from the curved trajectories followed by the fluid particles in unsteady flow cannot be neglected even for the case of a circular cone. With this correction, the present theory is in excellent agreement with experimental results for sharp cones and for cones with small nose bluntness; gives poor agreement with the results of experiments in air for bodies with moderate or large nose bluntness. The pitching motions of slender power-law bodies of revulution are shown to be always dynamically stable according to Newton-Busemann theory.

  2. Grounded theory method, Part II: Options for users of the method.

    Science.gov (United States)

    Annells, M

    1997-09-01

    Era-specific issues are presented for the consideration of the potential grounded theorist. Two of the issues are general to grounded theory method, while the other four assist in clarifying aspects relevant to the selection of a specific mode of the method. Five broad options regarding multiple possible modes of grounded theory method are suggested and detailed. The inquirer is not limited to the two major modes usually presented and discussed in the literature. Users of the method are challenged to continue contributing to the development of the method, while justifying and debating methodological modifications.

  3. Development of an Information Delivery Manual for Early Stage BIM-based Energy Performance Assessment and Code Compliance as a Part of DGNB Pre-Certification

    DEFF Research Database (Denmark)

    Petrova, Ekaterina Aleksandrova; Romanska, Iva; Stamenov, Martin

    2017-01-01

    for all parties involved. However, the persistent lack of early collaboration and process standardization prevent reaching the full potential of BIM-based performance evaluation. By following buildingSMART’s methodology for development of Information Delivery Manual/Model View Definition, this paper...... presents a framework for BIM-based energy performance assessment and code compliance, as required by the Danish Building Regulations and the DGNB rating system. Standardization of the information exchange would increase efficiency and reduce manual data input, duplication of work and errors due......The evolvement of integrated practices utilizing Building Performance Simulations has made it possible to address the growing needs of the building design. Furthermore, including a sustainability rating system in the early stages ensures a superior environmental performance and a common goal...

  4. Pdap Manual

    DEFF Research Database (Denmark)

    Pedersen, Mads Mølgaard; Larsen, Torben J.

    that allows automation and implementation of custom functions. This manual gives a short introduction to the graphical user interface, describes the mathematical background for some of the functions, describes the scripting API and finally a few examples on how automate analysis via scripting is presented......Pdap, Python Data Analysis Program, is a program for post processing, analysis, visualization and presentation of data e.g. simulation results and measurements. It is intended but not limited to the domain of wind turbines. It combines an intuitive graphical user interface with python scripting...

  5. Shuttle user analysis (study 2.2). Volume 3: Business risk and value of operations in space (BRAVO). Part 2: User's manual

    Science.gov (United States)

    1974-01-01

    The purpose of the BRAVO User's Manual is to describe the BRAVO methodology in terms of step-by-step procedures. The BRAVO methodology then becomes a tool which a team of analysts can utilize to perform cost effectiveness analyses on potential future space applications with a relatively general set of input information and a relatively small expenditure of resources. An overview of the BRAVO procedure is given by describing the complete procedure in a general form.

  6. Space shuttle/payload interface analysis. (Study 2.4) Volume 4: Business Risk and Value of Operations in Space (BRAVO). Part 2: User's manual

    Science.gov (United States)

    1974-01-01

    The BRAVO User's Manual is presented which describes the BRAVO methodology in terms of step-by-step procedures, so that it may be used as a tool for a team of analysts performing cost effectiveness analyses on potential future space applications. BRAVO requires a relatively general set of input information and a relatively small expenditure of resources. For Vol. 1, see N74-12493; for Vol. 2, see N74-14530.

  7. Zero-range effective field theory for resonant wino dark matter. Part I. Framework

    Science.gov (United States)

    Braaten, Eric; Johnson, Evan; Zhang, Hong

    2017-11-01

    The most dramatic "Sommerfeld enhancements" of neutral-wino-pair annihilation occur when the wino mass is near a critical value where there is a zero-energy S-wave resonance at the neutral-wino-pair threshold. Near such a critical mass, low-energy winos can be described by a zero-range effective field theory in which the winos interact nonperturbatively through a contact interaction. The effective field theory is controlled by a renormalization-group fixed point at which the neutral and charged winos are degenerate in mass and their scattering length is infinite. The parameters of the zero-range effective field theory can be determined by matching wino-wino scattering amplitudes calculated by solving the Schrödinger equation for winos interacting through a potential due to the exchange of weak gauge bosons. If the wino mass is larger than the critical value, the resonance is a wino-pair bound state. The power of the zero-range effective field theory is illustrated by calculating the rate for formation of the bound state in the collision of two neutral winos through the emission of two soft photons.

  8. Hamiltonian approach to GR - Part 1: covariant theory of classical gravity

    CERN Document Server

    Cremaschini, Claudio

    2016-01-01

    A challenging issue in General Relativity concerns the determination of the manifestly-covariant continuum Hamiltonian structure underlying the Einstein field equations and the related formulation of the corresponding covariant Hamilton-Jacobi theory. The task is achieved by adopting a synchronous variational principle requiring distinction between the prescribed deterministic metric tensor $\\hat{g}(r)\\equiv \\left\\{ \\hat{g}_{\\mu \

  9. An Interpretation of Part of Gilbert Gottlieb's Legacy: Developmental Systems Theory Contra Developmental Behavior Genetics

    Science.gov (United States)

    Molenaar, Peter C. M.

    2015-01-01

    The main theme of this paper concerns the persistent critique of Gilbert Gottlieb on developmental behavior genetics and my reactions to this critique, the latter changing from rejection to complete acceptation. Concise characterizations of developmental behavior genetics, developmental systems theory (to which Gottlieb made essential…

  10. The effective action of warped M-theory reductions with higher derivative terms - Part I

    NARCIS (Netherlands)

    Grimm, Thomas W.; Pugh, Tom G.; Weissenbacher, Matthias

    2016-01-01

    M-theory accessed via eleven-dimensional supergravity admits globally consistent warped solutions with eight-dimensional compact spaces if background fluxes and higher derivative terms are considered. The internal background is conformally K\\"ahler with vanishing first Chern class. We perturb these

  11. N=4 super-Yang-Mills in LHC superspace. Part I: Classical and quantum theory

    CERN Document Server

    Chicherin, Dmitry

    2017-02-10

    We present a formulation of the maximally supersymmetric N=4 gauge theory in Lorentz harmonic chiral (LHC) superspace. It is closely related to the twistor formulation of the theory but employs the simpler notion of Lorentz harmonic variables. They parametrize a two-sphere and allow us to handle efficiently infinite towers of higher-spin auxiliary fields defined on ordinary space-time. In this approach the chiral half of N=4 supersymmetry is manifest. The other half is realized non-linearly and the algebra closes on shell. We give a straightforward derivation of the Feynman rules in coordinate space. We show that the LHC formulation of the N=4 super-Yang-Mills theory is remarkably similar to the harmonic superspace formulation of the N=2 gauge and hypermultiplet matter theories. In the twin paper \\cite{twin} we apply the LHC formalism to the study of the non-chiral multipoint correlation functions of the N=4 stress-tensor supermultiplet.

  12. New N=1 dualities from orientifold transitions - Part II: String Theory

    CERN Document Server

    García-Etxebarria, Iñaki; Wrase, Timm

    2013-01-01

    We present a string theoretical description, given in terms of branes and orientifolds wrapping vanishing cycles, of the dual pairs of gauge theories analyzed in 1210.7799. Based on the resulting construction we argue that the duality that we observe in field theory is inherited from S-duality of type IIB string theory. We analyze in detail the complex cone over the zeroth del Pezzo surface and discuss an infinite family of orbifolds of flat space. For the del Pezzo case we describe the system in terms of large volume objects, and show that in this language the duality can be understood from the strongly coupled behavior of the O7^+ plane, which we analyze using simple F-theory considerations. For all cases we also give a different argument based on the existence of appropriate torsional components of the 3-form flux lattice. Along the way we clarify some aspects of the description of orientifolds in the derived category of coherent sheaves, and in particular we discuss the important role played by exotic ori...

  13. Cultural landscape in theory. 2nd Part: Development of truth – paths and goals

    National Research Council Canada - National Science Library

    Borut Juvanec

    2002-01-01

    ...) are closer to the circle and theory, than can be expected. Growth of architecture from the detail to spatial planning is the fruit of human balancing only in detail. Cities grow according to their own logic. The role of professions is therefore limited only to the establishment of strategies and controlling their growth. Things are much simpler, than we can imagine.

  14. An Emerging Theory for Evidence Based Information Literacy Instruction in School Libraries, Part 2: Building a Culture of Inquiry

    Directory of Open Access Journals (Sweden)

    Carol A. Gordon

    2009-09-01

    Full Text Available Objective – The purpose of this paper is to articulate a theory for the use of action research as a tool of evidence based practice for information literacy instruction in school libraries. The emerging theory is intended to capture the complex phenomenon of information skills teaching as it is embedded in school curricula. Such a theory is needed to support research on the integrated approach to teaching information skills and knowledge construction within the framework of inquiry learning. Part 1 of this paper, in the previous issue, built a foundation for emerging theory, which established user‐centric information behavior and constructivist learning theory as the substantive theory behind evidence based library instruction in schools. Part 2 continues to build on the Information Search Process and Guided Inquiry as foundational to studying the information‐to‐knowledge connection and the concepts of help and intervention characteristic of 21st century school library instruction.Methods – This paper examines the purpose and methodology of action research as a tool of evidence based instruction. This is accomplished through the explication of three components of theory‐building: paradigm, substantive research, and metatheory. Evidence based practice is identified as the paradigm that contributes values and assumptions about school library instruction. It establishes the role of evidence in teaching and learning, linking theory and practice. Action research, as a tool of evidence based practice is defined as the synthesis of authentic learning, or performance‐based assessment practices that continuously generate evidence throughout the inquiry unit of instruction and traditional data collection methods typically used in formal research. This paper adds social psychology theory from Lewin’s work, which contributes methodology from Gestalt psychology, field theory, group dynamics, and change theory. For Lewin the purpose of action

  15. "Do screen captures in manuals make a difference?" A comparison between textual and visual manuals

    NARCIS (Netherlands)

    Gellevij, M.R.M.; van der Meij, Hans; de Jong, Anthonius J.M.; Pieters, Julius Marie

    1998-01-01

    Examines the use of screen captures in manuals. Three types of manuals were compared: one textual and two visual. The two visual manuals differed in the type of screen capture that was used. One had screen captures that showed only the relevant part of the screen, whereas the other consisted of

  16. An Emerging Theory for Evidence Based Information Literacy Instruction in School Libraries, Part 1: Building a Foundation

    Directory of Open Access Journals (Sweden)

    Carol A. Gordon

    2009-06-01

    Full Text Available Objective – Part I of this paper aims to create a framework for an emerging theory of evidence based information literacy instruction. In order to ground this framework in existing theory, a holistic perspective views inquiry as a learning process that synthesizes information searching and knowledge building. An interdisciplinary approach is taken to relate user-centric information behavior theory and constructivist learning theory that supports this synthesis. The substantive theories that emerge serve as a springboard for emerging theory. A second objective of this paper is to define evidence based information literacy instruction by assessing the suitability of performance based assessment and action research as tools of evidence based practice.Methods – An historical review of research grounded in user-centered information behavior theory and constructivist learning theory establishes a body of existing substantive theory that supports emerging theory for evidence based information literacy instruction within an information-to-knowledge approach. A focused review of the literature presents supporting research for an evidence based pedagogy that is performance assessment based, i.e., information users are immersed in real-world tasks that include formative assessments. An analysis of the meaning of action research in terms of its purpose and methodology establishes its suitability for structuring an evidence based pedagogy. Supporting research tests a training model for school librarians and educators which integrates performance based assessment, as well as action research. Results – Findings of an historical analysis of information behavior theory and constructivist teaching practices, and a literature review that explores teaching models for evidence based information literacy instruction, point to two elements of evidence based information literacy instruction: the micro level of information searching behavior and the macro level of

  17. Magneto-thermo-elastokinetics of Geometrically Nonlinear Laminated Composite Plates. Part 1: Foundation of the Theory

    Science.gov (United States)

    Hasanyan, Davresh; Librescu, Liviu; Qin, Zhanming; Ambur, Damodar R.

    2006-01-01

    A fully coupled magneto-thermo-elastokinetic model of laminated composite, finitely electroconductive plates incorporating geometrical nonlinearities and subjected to a combination of magnetic and thermal fields, as well as carrying an electrical current is developed, In this context. the first-order transversely shearable plate theory in conjunction with von-Karman geometrically nonlinear strain concept is adopted. Related to the distribution of electric and magnetic field disturbances within the plate, the assumptions proposed by Ambartsumyan and his collaborators are adopted. Based on the electromagnetic equations (i.e. the ones by Faraday, Ampere, Ohm, Maxwell and Lorentz), the modified Fourier's law of heat conduction and on the elastokinetic field equations, the 3-D coupled problem is reduced to an equivalent 2- D one. The theory developed herein provides a foundation for the investigation, both analytical and numerical, of the interacting effects among the magnetic, thermal and elastic fields in multi-layered thin plates made of anisotropic materials.

  18. Grounded theory method, Part I: Within the five moments of qualitative research.

    Science.gov (United States)

    Annells, M

    1997-06-01

    While discussing how the grounded theory method has been situated during the five moments of qualitative research history, a detailed analysis is offered of the differences between the classic mode of the method and Strauss and Corbin's reformulation of the method. Such differences include: philosophical perspectives, paradigm of inquiry, intended product, theoretical underpinnings, procedural steps and claims of rigour. Reasons for Strauss and Corbin's elaboration of the method are suggested, within an historical context.

  19. OPERATION AND MAINTENANCE MANUAL FOR ELECTROSTATIC PRECIPITATORS

    Science.gov (United States)

    The manual focuses on the operation and maintenance (O/M) of typical electrostatic precipitators (ESPs). It summarizes available information on theory and design in sufficient detail to provide a basic background O/M portions of the manual. Although O/M-related air pollution prob...

  20. A primer on marginal effects--Part I: Theory and formulae.

    Science.gov (United States)

    Onukwugha, Eberechukwu; Bergtold, Jason; Jain, Rahul

    2015-01-01

    Marginal analysis evaluates changes in an objective function associated with a unit change in a relevant variable. The primary statistic of marginal analysis is the marginal effect (ME). The ME facilitates the examination of outcomes for defined patient profiles while measuring the change in original units (e.g., costs, probabilities). The ME has a long history in economics; however, it is not widely used in health services research despite its flexibility and ability to provide unique insights. This paper, the first in a two-part series, introduces and illustrates the calculation of the ME for a variety of regression models often used in health services research. Part One includes a review of prior studies discussing MEs, followed by derivation of ME formulas for various regression models including linear, logistic, multinomial logit model (MLM), generalized linear model (GLM) for continuous data, GLM for count data, two-part model, sample selection (two-stage) model, and parametric survival model. Prior theoretical papers in health services research reported the derivation and interpretation of ME primarily for the linear and logistic models, with less emphasis on count models, survival models, MLM, two-part models, and sample selection models. These additional models are relevant for health services research studies examining costs and utilization. Part Two of the series will focus on the methods for estimating and interpreting the ME in applied research. The illustration, discussion, and application of ME in this two-part series support the conduct of future studies applying the marginal concept.

  1. Women's journey of recovery from sexual assault trauma: a grounded theory--part 1.

    Science.gov (United States)

    Duma, S E; Mekwa, J N; Denny, L D

    2007-12-01

    Thousands of women and children experience sexual assault trauma annually in South Africa. The challenge posed by recovery from sexual assault trauma is a reality that confronts the survivors of sexual assault, their families and the larger community of service providers. Yet, little research has been conducted on recovery from sexual assault as a phenomenon. The purpose of the study was to explore and analyse the journey of recovery which is undertaken by women who have been sexually assaulted, with the aim of discovering and developing the grounded theory of recovery from sexual assault trauma within the first six months following the event of rape. The main research question was: What constitutes the journey of recovery undertaken by women within the first six months following sexual assault? A longitudinal qualitative study was conducted using the principles of grounded theory methodology as proposed by Strauss and Corbin (1990, 1998). A series of in-depth one-to-one interviews were conducted with a sample of ten women. The participants were selected through open, purposive and theoretical sampling procedures. The study was conducted over a period of six months following the event of sexual assault. The substantive theory was discovered and constructed through the inductive and deductive analysis of data, grounded on the ten women's descriptions of their journey of recovery from sexual assault. The theory of women's journey of recovery that was discovered and developed consisted of eight theoretical concepts or categories. These included the following concepts: 1. Sexual assault trauma 2. Awakening 3. Pragmatic acceptance 4. Turning point 5. Reclaiming what was lost 6. Defining own landmarks of healing 7. Readiness for closure 8. Returning to self. The grounded theory of the journey of recovery from sexual assault is a contribution to the knowledge about women's journey of recovery from sexual assault. It provides a process and language for understanding women

  2. Systematic Interviewing Skills. Typescript Manual.

    Science.gov (United States)

    Farley, Roy C.; Rubin, Stanford E.

    Part of a five-part package (see note) of training materials to teach interviewing skills to human services personnel, this typescript manual is intended for use as a visual reference to aid in understanding the taped dialogues of the packages tape/slide demonstrations of interview interaction, and for referral in class discussions. The typescript…

  3. Transactive System: Part II: Analysis of Two Pilot Transactive Systems using Foundational Theory and Metrics

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Jianming; Sun, Y; Kalsi, Karanjit; Widergren, Steven E.; Wu, Di; Ren, Huiying

    2018-01-24

    This document is the second of a two-part report. Part 1 reviewed several demonstrations of transactive control and compared them in terms of their payoff functions, control decisions, information privacy, and mathematical solution concepts. It was suggested in Part 1 that these four listed components should be adopted for meaningful comparison and design of future transactive systems. Part 2 proposes qualitative and quantitative metrics that will be needed to compare alternative transactive systems. It then uses the analysis and design principles from Part 1 while conducting more in-depth analysis of two transactive demonstrations: the American Electric Power (AEP) gridSMART Demonstration, which used a double –auction market mechanism, and a consensus method like that used in the Pacific Northwest Smart Grid Demonstration. Ultimately, metrics must be devised and used to meaningfully compare alternative transactive systems. One significant contribution of this report is an observation that the decision function used for thermostat control in the AEP gridSMART Demonstration has superior performance if its decision function is recast to more accurately reflect the power that will be used under for thermostatic control under alternative market outcomes.

  4. The Mallory body: theories on development and pathological significance (Part 2 of a literature survey)

    DEFF Research Database (Denmark)

    Jensen, K; Gluud, C

    1994-01-01

    Drawing on data from a previously published literature survey on the clinical and experimental epidemiology of the Mallory body, we discuss current theories on its development in a pro et contra manner. Conclusions have been largely left open to the interpretations of the reader because many...... be found with disease severity or duration in alcoholic liver diseases. The roles of vitamin A deficiency and protein-calorie malnutrition are circumstantial. Drugs known to have calcium-antagonist properties and the physiological characteristics of the stress-response protein ubiquitin support the concept...

  5. Action speaks louder than words: Empathy mainly modulates emotions from theory of mind-laden parts of a story

    DEFF Research Database (Denmark)

    Wallentin, Mikkel; Simonsen, Arndis; Nielsen, Andreas Højlund

    2013-01-01

    Narratives are thought to evoke emotions through empathy, which is thought to rely on theory of mind (a.k.a. “mentalizing”). In this study we investigated the extent to which these assumptions hold. Young adults rated their experienced emotional intensity while listening to a narrative and subseq......Narratives are thought to evoke emotions through empathy, which is thought to rely on theory of mind (a.k.a. “mentalizing”). In this study we investigated the extent to which these assumptions hold. Young adults rated their experienced emotional intensity while listening to a narrative...... and subsequently took an empathy test. We show how empathy correlates well with overall level of experienced intensity. However, no correlation with empathy is found in those parts of the story that received highest intensity ratings across participants. Reverse correlation analysis reveals that these parts...... contain physical threat scenarios, while parts where empathy score is highly correlated with intensity describe social interaction that can only be understood through mentalizing. This suggests that narratives evoke emotions, both based on “simple” physical contagion (affective empathy) and on complex...

  6. Essentials of Advocacy in Case Management: Part 1: Ethical Underpinnings of Advocacy-Theories, Principles, and Concepts.

    Science.gov (United States)

    Tahan, Hussein M

    2016-01-01

    This article describes the meaning and underpinnings of advocacy in the field of case management and shares essential principles and concepts for effective client advocacy. All practice settings across the continuum of health and human services and case managers of diverse professional backgrounds. Advocacy is vital to case management practice and a primary role of the professional case manager. It is rooted in ethical theory and principles. Successful case managers apply advocacy at every step of the case management process and in every action they take. Part I of this 2-part article explores the ethical theories and principles of advocacy, the perception of case management-related professional organizations of advocacy, and types of advocacy. Part II then presents a client advocacy model for case managers to apply in their practice, describes the role of advocacy in client engagement, and identifies important strategies and a set of essential competencies for effective case management advocacy. Acquiring foundational knowledge, skills, and competencies in what advocacy is equips case managers with the ability and confidence to enact advocacy-related behaviors in the provision of care to achieve desired outcomes for both the clients and health care agencies/providers alike. Case management leaders may use the knowledge shared in this article to develop advocacy training and competency programs for their case managers.

  7. Women’s journey of recovery from sexual assault trauma : a grounded theory - Part 1

    Directory of Open Access Journals (Sweden)

    S.E. Duma

    2007-09-01

    Full Text Available Thousands of women and children experience sexual assault trauma annually in South Africa. The challenge posed by recovery from sexual assault trauma is a reality that confronts the survivors of sexual assault, their families and the larger community of service providers. Yet, little research has been conducted on recovery from sexual assault as a phenomenon. The purpose of the study was to explore and analyse the journey of recovery which is undertaken by women who have been sexually assaulted, with the aim of discovering and developing the grounded theory of recovery from sexual assault trauma within the first six months following the event of rape. The main research question was: What constitutes the journey of recovery undertaken by women within the first six months following sexual assault? A longitudinal qualitative study was conducted using the principles of grounded theory methodology as proposed by Strauss and Corbin (1990,1998. A series of indepth one-to-one interviews were conducted with a sample of ten women. The participants were selected through open, purposive and theoretical sampling procedures. The study was conducted over a period of six months following the event of sexual assault.

  8. Conceptual Metaphor Theory and Teaching English as a Foreign Language: A Study on Body Part Terms

    Science.gov (United States)

    Çakir, Cemal

    2016-01-01

    Similarities and differences across languages can be observed in terms of the use of body part terms (BPTs) to express states, actions, emotions, and thoughts. This study primarily compared five best-selling English books with their Turkish translations and identified in both sets of books (a) the distribution of the literal and non-literal uses…

  9. Caltrans : construction manual

    Science.gov (United States)

    2009-08-01

    Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

  10. Collision Avoidance Short Course: Conjunction Assessment Risk Analysis - NASA Robotic CARA. Part I: ; Theory

    Science.gov (United States)

    Hejduk, M. D.; Frigm, Ryan C.

    2015-01-01

    Satellite conjunction assessment is perhaps the fastest growing area in space situational awareness and protection with military, civil and commercial satellite owner-operators embracing more and more sophisticated processes to avoid the avoidable - namely collisions between high value space assets and orbital debris. NASA and Centre National d'Etudes Spatiales (CNES) have collaborated to offer an introductory short course on all the major aspects of the conjunctions assessment problem. This half-day course will cover satellite conjunction dynamics and theory. Joint Space Operations Center (JsPOC) conjunction data products, major risk assessment parameters and plots, conjunction remediation decision support, and present and future challenges. This briefing represents the NASA portion of the course.

  11. Stochastic foundations of undulatory transport phenomena: generalized Poisson-Kac processes—part I basic theory

    Science.gov (United States)

    Giona, Massimiliano; Brasiello, Antonio; Crescitelli, Silvestro

    2017-08-01

    This article introduces the notion of generalized Poisson-Kac (GPK) processes which generalize the class of ‘telegrapher’s noise dynamics’ introduced by Kac (1974 Rocky Mount. J. Math. 4 497) in 1974, using Poissonian stochastic perturbations. In GPK processes the stochastic perturbation acts as a switching amongst a set of stochastic velocity vectors controlled by a Markov-chain dynamics. GPK processes possess trajectory regularity (almost everywhere) and asymptotic Kac limit, namely the convergence towards Brownian motion (and to stochastic dynamics driven by Wiener perturbations), which characterizes also the long-term/long-distance properties of these processes. In this article we introduce the structural properties of GPK processes, leaving all the physical implications to part II and part III (Giona et al 2016a J. Phys. A: Math. Theor., 2016b J. Phys. A: Math. Theor.).

  12. Toward a General Theory for Multiphase Turbulence Part I: Development and Gauging of the Model Equations

    Energy Technology Data Exchange (ETDEWEB)

    B. A. Kashiwa; W. B. VanderHeyden

    2000-12-01

    A formalism for developing multiphase turbulence models is introduced by analogy to the phenomenological method used for single-phase turbulence. A sample model developed using the formalism is given in detail. The procedure begins with ensemble averaging of the exact conservation equations, with closure accomplished by using a combination of analytical and experimental results from the literature. The resulting model is applicable to a wide range of common multiphase flows including gas-solid, liquid-solid and gas-liquid (bubbly) flows. The model is positioned for ready extension to three-phase turbulence, or for use in two-phase turbulence in which one phase is accounted for in multiple size classes, representing polydispersivity. The formalism is expected to suggest directions toward a more fundamentally based theory, similar to the way that early work in single-phase turbulence has led to the spectral theory. The approach is unique in that a portion of the total energy decay rate is ascribed to each phase, as is dictated by the exact averaged equations, and results in a transport equation for energy decay rate associated with each phase. What follows is a straightforward definition of a turbulent viscosity for each phase, and accounts for the effect of exchange of fluctuational energy among phases on the turbulent shear viscosity. The model also accounts for the effect of slip momentum transfer among the phases on the production of turbulence kinetic energy and on the tensor character of the Reynolds stress. Collisional effects, when appropriate, are included by superposition. The model reduces to a standard form in limit of a single, pure material, and is expected to do a credible job of describing multiphase turbulent flows in a wide variety of regimes using a single set of coefficients.

  13. Extreme events in total ozone over Arosa – Part 1: Application of extreme value theory

    Directory of Open Access Journals (Sweden)

    H. E. Rieder

    2010-10-01

    Full Text Available In this study ideas from extreme value theory are for the first time applied in the field of stratospheric ozone research, because statistical analysis showed that previously used concepts assuming a Gaussian distribution (e.g. fixed deviations from mean values of total ozone data do not adequately address the structure of the extremes. We show that statistical extreme value methods are appropriate to identify ozone extremes and to describe the tails of the Arosa (Switzerland total ozone time series. In order to accommodate the seasonal cycle in total ozone, a daily moving threshold was determined and used, with tools from extreme value theory, to analyse the frequency of days with extreme low (termed ELOs and high (termed EHOs total ozone at Arosa. The analysis shows that the Generalized Pareto Distribution (GPD provides an appropriate model for the frequency distribution of total ozone above or below a mathematically well-defined threshold, thus providing a statistical description of ELOs and EHOs. The results show an increase in ELOs and a decrease in EHOs during the last decades. The fitted model represents the tails of the total ozone data set with high accuracy over the entire range (including absolute monthly minima and maxima, and enables a precise computation of the frequency distribution of ozone mini-holes (using constant thresholds. Analyzing the tails instead of a small fraction of days below constant thresholds provides deeper insight into the time series properties. Fingerprints of dynamical (e.g. ENSO, NAO and chemical features (e.g. strong polar vortex ozone loss, and major volcanic eruptions, can be identified in the observed frequency of extreme events throughout the time series. Overall the new approach to analysis of extremes provides more information on time series properties and variability than previous approaches that use only monthly averages and/or mini-holes and mini-highs.

  14. CIRCE2/DEKGEN2: A software package for facilitated optical analysis of 3-D distributed solar energy concentrators. Theory and user manual

    Energy Technology Data Exchange (ETDEWEB)

    Romero, V.J.

    1994-03-01

    CIRCE2 is a computer code for modeling the optical performance of three-dimensional dish-type solar energy concentrators. Statistical methods are used to evaluate the directional distribution of reflected rays from any given point on the concentrator. Given concentrator and receiver geometries, sunshape (angular distribution of incident rays from the sun), and concentrator imperfections such as surface roughness and random deviation in slope, the code predicts the flux distribution and total power incident upon the target. Great freedom exists in the variety of concentrator and receiver configurations that can be modeled. Additionally, provisions for shading and receiver aperturing are included.- DEKGEN2 is a preprocessor designed to facilitate input of geometry, error distributions, and sun models. This manual describes the optical model, user inputs, code outputs, and operation of the software package. A user tutorial is included in which several collectors are built and analyzed in step-by-step examples.

  15. Chronic kidney disease certification process manual by the Italian Society of Nephrology (SIN): part II: programme management and clinical information management.

    Science.gov (United States)

    Quintaliani, Giuseppe; Cappelli, Gianni; Lodetti, Laura; Manno, Corrado; Petrucci, Virgilio; Spinelli, Cosimo; Tarchini, Renzo; Virgilio, Michele; Faini, Mario; Alloatti, Sandro; Cancarini, Giovanni; Zoccali, Carmine

    2009-01-01

    This is the second part of a document describing a voluntary certification process based on Joint Commission International (JCI) criteria developed by the Italian Society of Nephrology (SIN) and JCI representatives. In the first part we discussed standards for clinical care delivery and performance measurements related to chronic kidney disease care. Herein (Part II), we complete the description of Performace measurements and CKD care by describing issues related the management and clinical information management.

  16. 'Its all part of the big CHANGE': a grounded theory study of women's identity during menopause.

    Science.gov (United States)

    Sergeant, Judith; Rizq, Rosemary

    2017-09-01

    This study explores the impact of menopause on women's identity and considers the effect of sociocultural factors on their experience of this stage of life. Semi-structured interviews were conducted with 11 women and analysed following constructivist Grounded Theory methods. Women described uncertainty produced by their changing bodies. Menopause was interpreted as marking transition to another phase of life, which necessitated renegotiation of role and status in the face of menopause narratives questioning women's relevance, vigour, attractiveness and emotional stability. We discuss results with reference to what appears to be an unspoken social "rule" keeping menopause hidden, something that enables dismissive menopausal narratives to persist. Our study suggests this resulted in some sense of emotional strain for participants as they negotiated a continuing narrative of their lives through a period of change. However, results also indicate that menopause may provide an opportunity for women to refocus on their goals and wellbeing. We conclude by considering the implications of the study for healthcare professionals working with menopausal women.

  17. The changing understanding of ageing. Part 1: Evaluating ageing theories and studies.

    Science.gov (United States)

    Lawler, Dennis F

    2011-01-01

    This is the first of three discussions on emerging views of ageing, its derivation, and ageing-related diseases. To offer a context for the series, this first report briefly reviews several major early and recent theoretical debates. Arguments for and against several well-known ageing theories are presented for their veterinary relevance, including mutation, pleiotropy, reproduction-longevity trade-offs, oxygen metabolism and ageing as a genomically programmed product of natural selection. Additionally, the author presents commonly encountered problems when reading to interpret laboratory and population studies of ageing, offering busy clinicians a perspective on evaluating complex papers that analyse ageing-related data. Included among these problems are categorising intrinsic and extrinsic diseases, contrasts between laboratory-based and population-based observations, over-generalising research outcomes, short-term and long-term studies, and theoretical treatises. Central ideas of these discussions include why post-reproductive life span is relatively common among animals, the nature of age-related diseases relative to stochastic or programmed origins and the disease-related implications.

  18. The changing understanding of ageing. Part 1: Evaluating ageing theories and studies

    Directory of Open Access Journals (Sweden)

    Dennis F. Lawler

    2011-09-01

    Full Text Available This is the first of three discussions on emerging views of ageing, its derivation, and ageing-related diseases. To offer a context for the series, this first report briefly reviews several major early and recent theoretical debates. Arguments for and against several well-known ageing theories are presented for their veterinary relevance, including mutation, pleiotropy, reproduction-longevity trade-offs, oxygen metabolism and ageing as a genomically programmed product of natural selection. Additionally, the author presents commonly encountered problems when reading to interpret laboratory and population studies of ageing, offering busy clinicians a perspective on evaluating complex papers that analyse ageing-related data. Included among these problems are categorising intrinsic and extrinsic diseases, contrasts between laboratory-based and population-based observations, over-generalising research outcomes, short-term and long-term studies, and theoretical treatises. Central ideas of these discussions include why post-reproductive life span is relatively common among animals, the nature of age-related diseases relative to stochastic or programmed origins and the disease-related implications.

  19. Assessing EEG sleep spindle propagation. Part 1: theory and proposed methodology.

    Science.gov (United States)

    O'Reilly, Christian; Nielsen, Tore

    2014-01-15

    A convergence of studies has revealed sleep spindles to be associated with sleep-related cognitive processing and even with fundamental waking state capacities such as intelligence. However, some spindle characteristics, such as propagation direction and delay, may play a decisive role but are only infrequently investigated because of technical complexities. A new methodology for assessing sleep spindle propagation over the human scalp using noninvasive electroencephalography (EEG) is described. This approach is based on the alignment of time-frequency representations of spindle activity across recording channels. This first of a two-part series concentrates on framing theoretical considerations related to EEG spindle propagation and on detailing the methodology. A short example application is provided that illustrates the repeatability of results obtained with the new propagation measure in a sample of 32 night recordings. A more comprehensive experimental investigation is presented in part two of the series. Compared to existing methods, this approach is particularly well adapted for studying the propagation of sleep spindles because it estimates time delays rather than phase synchrony and it computes propagation properties for every individual spindle with windows adjusted to the specific spindle duration. The proposed methodology is effective in tracking the propagation of spindles across the scalp and may thus help in elucidating the temporal aspects of sleep spindle dynamics, as well as other transient EEG and MEG events. A software implementation (the Spyndle Python package) is provided as open source software. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. Parallel and Distributed Methods for Constrained Nonconvex Optimization—Part I: Theory

    Science.gov (United States)

    Scutari, Gesualdo; Facchinei, Francisco; Lampariello, Lorenzo

    2017-04-01

    In Part I of this paper, we proposed and analyzed a novel algorithmic framework for the minimization of a nonconvex (smooth) objective function, subject to nonconvex constraints, based on inner convex approximations. This Part II is devoted to the application of the framework to some resource allocation problems in communication networks. In particular, we consider two non-trivial case-study applications, namely: (generalizations of) i) the rate profile maximization in MIMO interference broadcast networks; and the ii) the max-min fair multicast multigroup beamforming problem in a multi-cell environment. We develop a new class of algorithms enjoying the following distinctive features: i) they are \\emph{distributed} across the base stations (with limited signaling) and lead to subproblems whose solutions are computable in closed form; and ii) differently from current relaxation-based schemes (e.g., semidefinite relaxation), they are proved to always converge to d-stationary solutions of the aforementioned class of nonconvex problems. Numerical results show that the proposed (distributed) schemes achieve larger worst-case rates (resp. signal-to-noise interference ratios) than state-of-the-art centralized ones while having comparable computational complexity.

  1. Periodic nonlinear Fourier transform for fiber-optic communications, Part I: theory and numerical methods.

    Science.gov (United States)

    Kamalian, Morteza; Prilepsky, Jaroslaw E; Le, Son Thai; Turitsyn, Sergei K

    2016-08-08

    In this work, we introduce the periodic nonlinear Fourier transform (PNFT) method as an alternative and efficacious tool for compensation of the nonlinear transmission effects in optical fiber links. In the Part I, we introduce the algorithmic platform of the technique, describing in details the direct and inverse PNFT operations, also known as the inverse scattering transform for periodic (in time variable) nonlinear Schrödinger equation (NLSE). We pay a special attention to explaining the potential advantages of the PNFT-based processing over the previously studied nonlinear Fourier transform (NFT) based methods. Further, we elucidate the issue of the numerical PNFT computation: we compare the performance of four known numerical methods applicable for the calculation of nonlinear spectral data (the direct PNFT), in particular, taking the main spectrum (utilized further in Part II for the modulation and transmission) associated with some simple example waveforms as the quality indicator for each method. We show that the Ablowitz-Ladik discretization approach for the direct PNFT provides the best performance in terms of the accuracy and computational time consumption.

  2. Growth theory after Keynes, part II: 75 years of obstruction by the mainstream economics culture

    Directory of Open Access Journals (Sweden)

    Hendrik Van den Berg

    2014-05-01

    Full Text Available Part I of this essay explained the sequence of events that enabled the neoclassical paradigm to regain its dominant position in mainstream economics following serious challenges by ‘Keynesian’ economists. This second essay seeks to answer the question of why the economics profession was so willing to sustain the neoclassical paradigm in the face of the reality-based challenges by ‘Keynesian’ economists like Harrod and Domar. The answer is sought in the culture of economics, the history of science in general, and the study of power in the field of political economy. This article draws heavily on the work of the French sociologist Pierre Bourdieu, who divides culture into habitus (procedures and dispositions and doxa (more abstract beliefs and philosophies, in order to provide insight into how culture affects economic thinking. Bourdieu’s concept of symbolic violence helps to explain how a narrower neoclassical growth model was enthusiastically accepted as a replacement for the ‘Keynesian’ Harrod-Domar growth model. Financial and business interests clearly understood the power of culture and they used their accumulated wealth to support the neoliberal doxa and neoclassical habitus that would induce economists to willingly provide intellectual cover for policies that benefitted those financial and business interests. We conclude with a discussion on how the history of thought on economic development might have evolved if the Keynesian paradigm, and its dynamic Harrod-Domar model, had prevailed

  3. Advances in Unsteady Boundary Layer Transition Research, Part I: Theory and Modeling

    Directory of Open Access Journals (Sweden)

    M. T. Schobeiri

    2003-01-01

    Full Text Available This two-part article presents recent advances in boundary layer research that deal with the unsteady boundary layer transition modeling and its validation. A new unsteady boundary layer transition model was developed based on a universal unsteady intermittency function. It accounts for the effects of periodic unsteady wake flow on the boundary layer transition. To establish the transition model, an inductive approach was implemented; the approach was based on the results of comprehensive experimental and theoretical studies of unsteady wake flow and unsteady boundary layer flow. The experiments were performed on a curved plate at a zero streamwise pressure gradient under a periodic unsteady wake flow, where the frequency of the periodic unsteady flow was varied. To validate the model, systematic experimental investigations were performed on the suction and pressure surfaces of turbine blades integrated into a high-subsonic cascade test facility, which was designed for unsteady boundary layer investigations. The analysis of the experiment's results and comparison with the model's prediction confirm the validity of the model and its ability to predict accurately the unsteady boundary layer transition.

  4. A Computer Compatible System for the Categorization, Enumeration, and Retrieval of Nineteenth and Early Twentieth Century Archaeological Material Culture. Part 2. Manual for Identification and Classification.

    Science.gov (United States)

    1983-12-01

    acknowledged. Finally and most especially, thanks is due to Kim McBride, editor, typist, coordinator and all around dynamo who is responsible for...include all metal and metal parts used in the manufacture of children’s playthings. Some examples include "tin" soldiers, wagons, scooters, bicycles , and...pieces, slat irons, tap stays and whip sockets. Other transportation refers to bicycles , airplanes, trains and street cars and their parts. (21

  5. Methane measurements manual; Handbok metanmaetningar

    Energy Technology Data Exchange (ETDEWEB)

    Holmgren, Magnus Andreas (SP Technical research institute of Sweden, Boraas (Sweden))

    2011-02-15

    Emissions to air in different parts of the system may arise in biogas plants, where there is biological treatment of organic matter by anaerobic degradation, and during upgrading of biogas to vehicle fuel. There are mainly four reasons why these emissions must be minimized. These are safety, greenhouse gas emissions, economy and smell. This manual gathers experience of several years of work with measurement of methane emissions from biogas and upgrading facilities. This work has been done mainly in the context of Swedish Waste Management's system of voluntary commitment. The purpose of this manual is to standardize methods and procedures when methane measurements are carried out so that the results are comparable between different providers. The main target group of the manual is measurement consultants performing such measurements. Calculation template in Excel is part of the manual, which further contributes to the measurements evaluated in a standardized way. The manual contains several examples which have been calculated in the accompanying Excel template. The handbook also contains a chapter mainly intended for facility staff, in which implementation of accurate leak detection is described, and where there are hints of a system of so-called intermediate inspections to detect leaks in time

  6. Spanish for Agricultural Purposes: The Basic Manual.

    Science.gov (United States)

    Mainous, Bruce H.; And Others

    This manual, part of a one-semester course for North American agriculture specialists preparing to work in Latin America, is built around specimens of agricultural writing in Spanish. The manual contains 12 lessons on general agriculture, sugar production, grain production, geography, forestry, animal husbandry, soy bean production, agricultural…

  7. 76 FR 39259 - Manual Requirements

    Science.gov (United States)

    2011-07-06

    ... Federal Aviation Administration 14 CFR Part 91 Manual Requirements AGENCY: Federal Aviation Administration... final rule established new requirements for the certification, operation, and maintenance of light-sport... Register on July 27, 2004 (69 FR 44772). That final rule established new requirements for the certification...

  8. Radiological Control Manual. Revision 0, January 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  9. Manual for best practice for emergency response procedures, part 4: a checklist of best practice requirements for the prevention and management of inrushes, fires, explosions and other emergencies.

    CSIR Research Space (South Africa)

    Spencer, KC

    2000-02-01

    Full Text Available From Parts 1 and 2 of this report all the salient points and additional detail arising from these points have been collated and put into a checklist format to enable the user on any colliery to carry out a first order audit. Once this has been...

  10. Rivet user manual

    Science.gov (United States)

    Buckley, Andy; Butterworth, Jonathan; Grellscheid, David; Hoeth, Hendrik; Lönnblad, Leif; Monk, James; Schulz, Holger; Siegert, Frank

    2013-12-01

    This is the manual and user guide for the Rivet system for the validation and tuning of Monte Carlo event generators. As well as the core Rivet library, this manual describes the usage of the rivet program and the AGILe generator interface library. The depth and level of description is chosen for users of the system, starting with the basics of using validation code written by others, and then covering sufficient details to write new Rivet analyses and calculational components. Catalogue identifier: AEPS_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEPS_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 571126 No. of bytes in distributed program, including test data, etc.: 4717522 Distribution format: tar.gz Programming language: C++, Python. Computer: PC running Linux, Mac. Operating system: Linux, Mac OS. RAM: 20 MB Classification: 11.9, 11.2. External routines: HepMC (https://savannah.cern.ch/projects/hepmc/), GSL (http://www.gnu.org/software/gsl/manual/gsl-ref.html), FastJet (http://fastjet.fr/), Python (http://www.python.org/), Swig (http://www.swig.org/), Boost (http://www.boostsoftware.com/), YAML (http://www.yaml.org/spec/1.2/spec.html) Nature of problem: Experimental measurements from high-energy particle colliders should be defined and stored in a general framework such that it is simple to compare theory predictions to them. Rivet is such a framework, and contains at the same time a large collection of existing measurements. Solution method: Rivet is based on HepMC events, a standardised output format provided by many theory simulation tools. Events are processed by Rivet to generate histograms for the requested list of analyses, incorporating all experimental phase space cuts and histogram definitions. Restrictions: Cannot calculate

  11. Manual for best practice for emergency response procedures, part 3: a review of the department of Minerals and Energy guidelines relevant to inrushes, fires, explosions and other emergencies.

    CSIR Research Space (South Africa)

    Spencer, KC

    2000-02-01

    Full Text Available PRACTICE FOR EMERGENCY RESPONSE PROCEDURES PART 3 A REVIEW OF THE DEPARTMENT OF MINERALS AND ENERGY GUIDELINES RELEVANT TO INRUSHES, FIRES, EXPLOSIONS AND OTHER EMERGENCIES Authors: K C Spencer, D M Walters, T P T Page and A G du Plessis. Research.... 12) This comprehensive draft document was drawn up by a tripartite working group. The document also appears to be satisfactory. 3 Conclusions It is our opinion that no further guidelines with respect to emergencies in collieries require...

  12. PROTEUS-SN User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Shemon, Emily R. [Argonne National Lab. (ANL), Argonne, IL (United States); Smith, Micheal A. [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, Changho [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-02-16

    is a part of the SHARP multi-physics suite for coupled multi-physics analysis of nuclear reactors. This user manual describes how to set up a neutron transport simulation with the PROTEUS-SN code. A companion methodology manual describes the theory and algorithms within PROTEUS-SN.

  13. Temporal scattering and reflection software: User's manual

    Science.gov (United States)

    McLeod, Robert R.

    1989-02-01

    This manual gives complete information on how to use the TSAR electromagnetic analysis software. Included are descriptions of input files, the details of how these files affect the problem, and output data specifications. What is not included is the theory of the finite-difference time-domain (FDTD) algorithm or details of the TSAR implementation of it. This manual assumes that readers are sufficiently familiar with FDTD that they only need the how to knowledge presented here.

  14. LOLA SYSTEM: A code block for nodal PWR simulation. Part. II - MELON-3, CONCON and CONAXI Codes

    Energy Technology Data Exchange (ETDEWEB)

    Aragones, J. M.; Ahnert, C.; Gomez Santamaria, J.; Rodriguez Olabarria, I.

    1985-07-01

    Description of the theory and users manual of the MELON-3, CONCON and CONAXI codes, which are part of the core calculation system by nodal theory in one group, called LOLA SYSTEM. These auxiliary codes, provide some of the input data for the main module SIMULA-3; these are, the reactivity correlations constants, the albe does and the transport factors. (Author) 7 refs.

  15. 14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft that was not type certificated with an Airplane or Rotorcraft Flight Manual...

  16. Wikipedia the missing manual

    CERN Document Server

    Broughton, John

    2008-01-01

    Want to be part of the largest group-writing project in human history? Learn how to contribute to Wikipedia, the user-generated online reference for the 21st century. Considered more popular than eBay, Microsoft.com, and Amazon.com, Wikipedia servers respond to approximately 30,000 requests per second, or about 2.5 billion per day. It's become the first point of reference for people the world over who need a fact fast.If you want to jump on board and add to the content, Wikipedia: The Missing Manual is your first-class ticket. Wikipedia has more than 9 million entries in 250 languages, over 2

  17. EQ3NR, a computer program for geochemical aqueous speciation-solubility calculations: Theoretical manual, user`s guide, and related documentation (Version 7.0); Part 3

    Energy Technology Data Exchange (ETDEWEB)

    Wolery, T.J.

    1992-09-14

    EQ3NR is an aqueous solution speciation-solubility modeling code. It is part of the EQ3/6 software package for geochemical modeling. It computes the thermodynamic state of an aqueous solution by determining the distribution of chemical species, including simple ions, ion pairs, and complexes, using standard state thermodynamic data and various equations which describe the thermodynamic activity coefficients of these species. The input to the code describes the aqueous solution in terms of analytical data, including total (analytical) concentrations of dissolved components and such other parameters as the pH, pHCl, Eh, pe, and oxygen fugacity. The input may also include a desired electrical balancing adjustment and various constraints which impose equilibrium with special pure minerals, solid solution end-member components (of specified mole fractions), and gases (of specified fugacities). The code evaluates the degree of disequilibrium in terms of the saturation index (SI = 1og Q/K) and the thermodynamic affinity (A = {minus}2.303 RT log Q/K) for various reactions, such as mineral dissolution or oxidation-reduction in the aqueous solution itself. Individual values of Eh, pe, oxygen fugacity, and Ah (redox affinity) are computed for aqueous redox couples. Equilibrium fugacities are computed for gas species. The code is highly flexible in dealing with various parameters as either model inputs or outputs. The user can specify modification or substitution of equilibrium constants at run time by using options on the input file.

  18. EQ6, a computer program for reaction path modeling of aqueous geochemical systems: Theoretical manual, user`s guide, and related documentation (Version 7.0); Part 4

    Energy Technology Data Exchange (ETDEWEB)

    Wolery, T.J.; Daveler, S.A.

    1992-10-09

    EQ6 is a FORTRAN computer program in the EQ3/6 software package (Wolery, 1979). It calculates reaction paths (chemical evolution) in reacting water-rock and water-rock-waste systems. Speciation in aqueous solution is an integral part of these calculations. EQ6 computes models of titration processes (including fluid mixing), irreversible reaction in closed systems, irreversible reaction in some simple kinds of open systems, and heating or cooling processes, as well as solve ``single-point`` thermodynamic equilibrium problems. A reaction path calculation normally involves a sequence of thermodynamic equilibrium calculations. Chemical evolution is driven by a set of irreversible reactions (i.e., reactions out of equilibrium) and/or changes in temperature and/or pressure. These irreversible reactions usually represent the dissolution or precipitation of minerals or other solids. The code computes the appearance and disappearance of phases in solubility equilibrium with the water. It finds the identities of these phases automatically. The user may specify which potential phases are allowed to form and which are not. There is an option to fix the fugacities of specified gas species, simulating contact with a large external reservoir. Rate laws for irreversible reactions may be either relative rates or actual rates. If any actual rates are used, the calculation has a time frame. Several forms for actual rate laws are programmed into the code. EQ6 is presently able to model both mineral dissolution and growth kinetics.

  19. Reconceptualising manual therapy skills in contemporary practice

    DEFF Research Database (Denmark)

    Rabey, Martin; Hall, Toby; Hebron, Clair

    2017-01-01

    With conflicting evidence regarding the effectiveness of manual therapy calls have arisen within some quarters of the physiotherapy profession challenging the continued use of manual skills for assessment and treatment. A reconceptualisation of the importance of manual examination findings is put...... the presentations of five people with low back pain. As part of multidimensional, individualised management, the balance of evidence relating to the effectiveness, mechanisms of action and rationale for manual skills is discussed. It is concluded that if manual examination and therapeutic skills are used...... in a manner consistent with a contemporary understanding of pain science, multidimensional patient pro-files and a person-centred approach, their selective and judicious use still has an important role...

  20. Developmental Systems Theory and the Person-Oriented Approach. Commentary on: "An Interpretation of Part of Gilbert Gottlieb's Legacy: Developmental Systems Theory Contra Developmental Behavior Genetics"

    Science.gov (United States)

    Bergman, Lars R.

    2015-01-01

    Molenaar's (2015) article concerns Developmental Systems Theory (DST) in relation to behavior genetics and he presents implications of DST for empirical research, especially the need for subject-specific studies. In this commentary, the article is discussed from a broader developmental science perspective, particularly regarded through the lens of…

  1. Design/CPN. A Reference Manual

    DEFF Research Database (Denmark)

    Jensen et. al, Kurt

    /CPN WWW pages. To speed up the access to the Design/CPN manuals we recommend to keep a local copy - which may be shared by all users in your organisation. In this way you do not need to go via our WWW server each time you need to look in a manual. For some of the largest manuals, we also supply files...... containing smaller parts. In this way it is easy, e.g., to keep the index open in one window while you keep the main part open in another and perhaps the table of contents in a third. Corrections to the Design/CPN manuals are made by adding a number of "yellow stickers" to the PDF file - they open when you...

  2. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-03-25

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  3. PCs The Missing Manual

    CERN Document Server

    Karp, David

    2005-01-01

    Your vacuum comes with one. Even your blender comes with one. But your PC--something that costs a whole lot more and is likely to be used daily and for tasks of far greater importance and complexity--doesn't come with a printed manual. Thankfully, that's not a problem any longer: PCs: The Missing Manual explains everything you need to know about PCs, both inside and out, and how to keep them running smoothly and working the way you want them to work. A complete PC manual for both beginners and power users, PCs: The Missing Manual has something for everyone. PC novices will appreciate the una

  4. EMSL Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Nancy S.

    2009-06-18

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  5. Temporal scattering and response software: Users' manual

    Science.gov (United States)

    McLeod, Robert R.

    1990-09-01

    This manual gives complete information on how to use the TSAR electromagnetic analysis software. Included are descriptions of input files, the details of how these files affect the problem, and output data specifications. What is not included is the theory of the finite-difference time-domain (FDTD) algorithm or details of the TSAR implementation of it. This manual assumes that readers are sufficiently familiar with FDTD that they only need the how to knowledge presented here. For further information on the theory of operation of TSAR, see the papers reference in the bibliography. This is a reference, rather than a tutorial manual. To help new users become familiar with the TSAR software, a set of example problems is included with the TSAR distribution.

  6. Boiler Control Systems Theory of Operation Manual.

    Science.gov (United States)

    1983-02-01

    through linkage to the One Master Controller of this tipe and one power fuel and air cositrollers. This po-wer unit can- also ad. unit can control the...directly vides a quick check of systenm performance and per. indicates level. Available for use in electric or pneu . mits checking transmitting systemn

  7. MSTS - Multiphase Subsurface Transport Simulator theory manual

    Energy Technology Data Exchange (ETDEWEB)

    White, M.D.; Nichols, W.E.

    1993-05-01

    The US Department of Energy, through the Yucca Mountain Site Characterization Project Office, has designated the Yucca Mountain site in Nevada for detailed study as the candidate US geologic repository for spent nuclear fuel and high-level radioactive waste. Site characterization will determine the suitability of the Yucca Mountain site for the potential waste repository. If the site is determined suitable, subsequent studies and characterization will be conducted to obtain authorization from the Nuclear Regulatory Commission to construct the potential waste repository. A principal component of the characterization and licensing processes involves numerically predicting the thermal and hydrologic response of the subsurface environment of the Yucca Mountain site to the potential repository over a 10,000-year period. The thermal and hydrologic response of the subsurface environment to the repository is anticipated to include complex processes of countercurrent vapor and liquid migration, multiple-phase heat transfer, multiple-phase transport, and geochemical reactions. Numerical simulators based on mathematical descriptions of these subsurface phenomena are required to make numerical predictions of the thermal and hydrologic response of the Yucca Mountain subsurface environment The engineering simulator called the Multiphase Subsurface Transport Simulator (MSTS) was developed at the request of the Yucca Mountain Site Characterization Project Office to produce numerical predictions of subsurface flow and transport phenomena at the potential Yucca Mountain site. This document delineates the design architecture and describes the specific computational algorithms that compose MSTS. Details for using MSTS and sample problems are given in the {open_quotes}User`s Guide and Reference{close_quotes} companion document.

  8. Energy Extension Service Program planning manual

    Energy Technology Data Exchange (ETDEWEB)

    Liersch, Judith M.

    1979-06-01

    The manual is the first revision of the EES Program Planning Manual. At the states' request, there have been a number of changes to the state EES contacts list, and an updated list is included in this package as the revised Appendix D. Part I, Introduction, presents: How to Use the State Program Planning Manual and The Energy Extension Service Program. Part II, Applying for an EES Grant, presents: The Annual State Application for Financial Assistance; State Financial Assistance and Associated Requirements; Preparing the State Plan. Part III, Operating a State EES, presents: Start-Up Considerations; State Program Reporting; Recordkeeping and Financial Management. Part IV, DOE's Role, presents DOE Functions and Responsibilities and Special Cases: Development and Implementation of a State Plan by the EES Director and Administrative Review.

  9. Axisymmetric flow in a cylindrical tank over a rotating bottom. Part II. Deformation of the water surface and experimental verification of the theory

    Science.gov (United States)

    Iga, Keita; Yokota, Sho; Watanabe, Shunichi; Ikeda, Takashi; Niino, Hiroshi; Misawa, Nobuhiko

    2017-12-01

    The theory of axisymmetric flow in a cylindrical container with a rotating bottom, as described in Part I, is validated against the results of previous and our own laboratory experiments. First, deformation of the water surface is derived using the velocity distribution of the axisymmetric flow obtained by the theory. The form of the water surface is classified into three regimes, and the rotation rates of the transitions between these regimes are determined. The parameters predicted from this theory are compared with the results measured in laboratory experiments and also with data from previous experimental studies. The theory predicts the experimental data well, but a slight difference was found in the narrow region close to the side wall. Corrections estimated by considering the fluid behavior around the side wall boundary layer successfully explain most of the discrepancies. This theory appears to predict the results of the laboratory experiments very well, much better than a theory using an assumption of quadratic drag as a model of turbulent boundary layers.

  10. Potato breeding : a practical manual for the potato chain

    NARCIS (Netherlands)

    Tiemens-Hulscher, M.; Delleman, J.; Eisinger, E.; Lammerts Van Bueren, E.

    2013-01-01

    This is the first practical manual ever published for potato breeding which combines theory, scientific knowledge and, specifically, practical application and methodology. It serves the practical breeder as well as other parties involved in the potato industry.

  11. Chemical Spill Response Manual

    NARCIS (Netherlands)

    Marieke Zeinstra; Wierd Koops

    2014-01-01

    A two year programme has been carried out by the NHL University of Applied Sciences together with private companies in the field of oil and chemical spill response to finalize these manuals on oil and chemical spill response. These manuals give a good overview of all aspects of oil and chemical

  12. Oil Spill Response Manual

    NARCIS (Netherlands)

    Sandra Heins; Marieke Zeinstra; Wierd Koops

    2014-01-01

    A two year programme has been carried out by the NHL University of Applied Sciences together with private companies in the field of oil and chemical spill response to finalize these manuals on oil and chemical spill response. These manuals give a good overview of all aspects of oil and chemical

  13. Eco-Innovation Manual

    DEFF Research Database (Denmark)

    O'Hare, Jamie Alexander; McAloone, Tim C.; Pigosso, Daniela Cristina Antelmi

    Aim of this manual is to introduce a methodology for the implementation of eco‐innovation within small and medium sized companies in developing and emerging economies. The intended audience of this manual is organizations that provide professional services to guide and support manufacturing...... companies to improve their sustainability performance....

  14. Manually Maintained Serials Records.

    Science.gov (United States)

    Ortopan, LeRoy D.; And Others

    At the American Library Association Annual Conference in Dallas in 1971, the Serials Section of the Resources and Technical Services Division established a committee to produce a state-of-the-art report on the maintenance of serial records by manual methods in all types of libraries. The Ad Hoc Committee to Study Manually Maintained Serials…

  15. Christmas Tree Pest Manual

    Science.gov (United States)

    Department of Entomology Michigan State University

    1998-01-01

    This manual can help you identify and control damaging Christmas tree pests in the North Central region of the United States. Most of the information also applies to the northeastern states and to the southern portions of the Canadian Provinces that border these states. You do not have to be a pest specialist to use this information; we wrote the manual in everyday...

  16. Materials inventory management manual

    Science.gov (United States)

    1992-01-01

    This NASA Materials Inventory Management Manual (NHB 4100.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958 (42 USC 2473). It sets forth policy, performance standards, and procedures governing the acquisition, management and use of materials. This Manual is effective upon receipt.

  17. The Study on the Overall Plasma Electrolytic Oxidation for 6061–7075 Dissimilar Aluminum Alloy Welded Parts Based on the Dielectric Breakdown Theory

    Science.gov (United States)

    Song, Xiaocun; Zhou, Jixue; Liu, Hongtao; Yang, Yuansheng

    2018-01-01

    Electrical connection of dissimilar metals will lead to galvanic corrosion. Therefore, overall surface treatment is necessary for the protection of dissimilar metal welded parts. However, serious unbalanced reactions may occur during overall surface treatment, which makes it difficult to prepare integral coating. In this paper, an overall ceramic coating was fabricated by plasma electrolytic oxidation to wrap the 6061–7075 welded part integrally. Moreover, the growth mechanism of the coating on different areas of the welded part was studied based on the dielectric breakdown theory. The reaction sequence of each area during the treatment was verified through specially designed dielectric breakdown tests. The results showed that the high impedance overall of ceramic coating can inhibit the galvanic corrosion of the 6061–7075 welded part effectively. PMID:29301306

  18. Homotopy of operads and Grothendieck–Teichmüller groups part 2 the applications of (rational) homotopy theory methods

    CERN Document Server

    Fresse, Benoit

    2017-01-01

    The ultimate goal of this book is to explain that the Grothendieck-Teichmüller group, as defined by Drinfeld in quantum group theory, has a topological interpretation as a group of homotopy automorphisms associated to the little 2-disc operad. To establish this result, the applications of methods of algebraic topology to operads must be developed. This volume is devoted primarily to this subject, with the main objective of developing a rational homotopy theory for operads. The book starts with a comprehensive review of the general theory of model categories and of general methods of homotopy theory. The definition of the Sullivan model for the rational homotopy of spaces is revisited, and the definition of models for the rational homotopy of operads is then explained. The applications of spectral sequence methods to compute homotopy automorphism spaces associated to operads are also explained. This approach is used to get a topological interpretation of the Grothendieck-Teichmüller group in the case of the ...

  19. Aerodynamic Interference between Oscillating Lifting Surfaces and Fuselage Part 2: Some Applications of Oscillating Lifting Surface Theory

    Directory of Open Access Journals (Sweden)

    Valentin Adrian Jean BUTOESCU

    2014-03-01

    Full Text Available This is the second article of a series that deals with the calculation of the aerodynamic unsteady forces on lifting surfaces. It presents some new important details on the lifting surface theory that performs oscillations in subsonic flow. These features will be applied to the aerodynamic response to certain kind of gusts and to the flapping wing calculations.

  20. Field theory

    CERN Document Server

    Roman, Steven

    2006-01-01

    Intended for graduate courses or for independent study, this book presents the basic theory of fields. The first part begins with a discussion of polynomials over a ring, the division algorithm, irreducibility, field extensions, and embeddings. The second part is devoted to Galois theory. The third part of the book treats the theory of binomials. The book concludes with a chapter on families of binomials - the Kummer theory. This new edition has been completely rewritten in order to improve the pedagogy and to make the text more accessible to graduate students.  The exercises have also been im

  1. Fire Protection Program Manual

    Energy Technology Data Exchange (ETDEWEB)

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  2. Does ignorance of the whole imply ignorance of the parts? - Large violations of non-contextuality in quantum theory

    OpenAIRE

    Vidick, Thomas; Wehner, Stephanie

    2010-01-01

    A central question in our understanding of the physical world is how our knowledge of the whole relates to our knowledge of the individual parts. One aspect of this question is the following: to what extent does ignorance about a whole preclude knowledge of at least one of its parts? Relying purely on classical intuition, one would certainly be inclined to conjecture that a strong ignorance of the whole cannot come without significant ignorance of at least one of its parts. Indeed, we show th...

  3. The use and abuse of attachment theory in clinical practice with maltreated children, part I: diagnosis and assessment.

    Science.gov (United States)

    Allen, Brian

    2011-01-01

    Debate has ensued regarding the appropriate assessment and diagnosis for school-age children who display severe behavioral problems as a result of previous abuse and neglect within the primary attachment relationship. The current nomenclature recognizes reactive attachment disorder and some clinicians have suggested broader categories of attachment disorder. These attempts at classification are often criticized on empirical grounds; however, often lost in these criticisms is the fact that that these diagnostic approaches often misapply attachment theory and research. This article summarizes the original contributions of John Bowlby and other attachment researchers to our understanding of child development, examines misguided attempts to apply attachment theory to the diagnosis and assessment of maltreated children, and offers a diagnostic conceptualization and assessment recommendations consistent with the available attachment research.

  4. Paver Asphalt Distress Manual

    National Research Council Canada - National Science Library

    Shahin, M

    1997-01-01

    .... Army Construction Engineering Research Laboratories (USACERL) in June 1989. It comprises an illustrated asphalt pavement distress manual suitable for use by pavement inspection personnel in the field or in pavement inspection training courses...

  5. Geochemical engineering reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Owen, L.B.; Michels, D.E.

    1984-01-01

    The following topics are included in this manual: physical and chemical properties of geothermal brine and steam, scale and solids control, processing spent brine for reinjection, control of noncondensable gas emissions, and goethermal mineral recovery. (MHR)

  6. NCDC Archive Documentation Manuals

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Climatic Data Center Tape Deck Documentation library is a collection of over 400 manuals describing NCDC's digital holdings (both historic and current)....

  7. The Influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings - Part I: Theory

    DEFF Research Database (Denmark)

    Heinrichson, Niels; Santos, Ilmar; Fuerst, Axel

    2007-01-01

    This is Part I of a two-part series of papers describing the effects of high-pressure injection pockets on the operating conditions of tilting-pad thrust bearings. In Part I a numerical model based on the Reynolds equation is developed extending the threedimensional thermoelastohydrodynamic (TEHD......) analysis of tilting-pad thrust bearings to include the effects of high-pressure injection and recesses in the bearing pads. The model is applied to the analysis of an existing bearing of large dimensions and the influence of the pocket is analyzed. In the analysis, the high-pressure oil injection used...... for hydrostatic jacking is turned off (i.e., only the effect of the pocket is studied). It is shown that a shallow pocket positively influences the performance of the bearing because it has characteristics similar to those of a Rayleigh-step bearing. In Part II of the paper (Heinrichson, N., Fuerst, A...

  8. Homotopy of operads and Grothendieck–Teichmüller groups part 1 the algebraic theory and its topological background

    CERN Document Server

    Fresse, Benoit

    2017-01-01

    The Grothendieck-Teichmüller group was defined by Drinfeld in quantum group theory with insights coming from the Grothendieck program in Galois theory. The ultimate goal of this book is to explain that this group has a topological interpretation as a group of homotopy automorphisms associated to the operad of little 2-discs, which is an object used to model commutative homotopy structures in topology. This volume gives a comprehensive survey on the algebraic aspects of this subject. The book explains the definition of an operad in a general context, reviews the definition of the little discs operads, and explains the definition of the Grothendieck-Teichmüller group from the viewpoint of the theory of operads. In the course of this study, the relationship between the little discs operads and the definition of universal operations associated to braided monoidal category structures is explained. Also provided is a comprehensive and self-contained survey of the applications of Hopf algebras to the definition of...

  9. Peace Corps Aquaculture Training Manual. Training Manual T0057.

    Science.gov (United States)

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

  10. GNU Octave Manual Version 3

    DEFF Research Database (Denmark)

    W. Eaton, John; Bateman, David; Hauberg, Søren

    This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave.......This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave....

  11. The influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings: Part I - Theory

    DEFF Research Database (Denmark)

    Heinrichson, Niels; Santos, Ilmar; Fuerst, Axel

    2006-01-01

    This is Part I of a two-part series of papers describing the effects of high pressure injection pockets on the operating conditions of tilting-pad thrust bearings. A numerical model based on the Reynolds equation is developed extending the three dimensional thermo-elasto-hydrodynamic (TEHD......) analysis of tilting-pad thrust bearings to include the effects of high pressure injection and recesses in the bearing pad. The model is applied to the analysis of an existing bearing of large dimensions and the influence of the pocket is analyzed. It is shown that a shallow pocket positively influences...

  12. SHARP User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Thomas, J. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States); Solberg, Jerome [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-31

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  13. Fad diets and obesity--Part II: An introduction to the theory behind low-carbohydrate diets.

    Science.gov (United States)

    Moyad, Mark A

    2004-06-01

    Low-carbohydrate diets are not only highly popular but also controversial. The theory or general concept behind the low-carbohydrate dietary approach needs to receive more attention to provide more objectivity to this discussion. The theory or concept that actually has some evidence currently lies in the values of the glycemic index (GI) and glycemic load (GL). Basically, the higher the GI, the greater the glucose response. However, the GI system that was originally proffered in 1981 comes with one apparent limitation in that some foods or beverages need to be obtained in enormous amounts in order to observe such a glucose change. Therefore, the newer concept of GL (derived from the GI) is based on a more moderate-portion size and the resultant glucose change with some of the higher GI foods or beverages actually demonstrating a low GL. These and other limitations and some advantages of low-carbohydrate diets with an emphasis of what an actual GI or GL means are discussed.

  14. In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part I: Linear Theory

    Science.gov (United States)

    Goldman, Benjamin D.; Dowell, Earl H.; Scott, Robert C.

    2014-01-01

    Conical shell theory and piston theory aerodynamics are used to study the aeroelastic stability of the thermal protection system (TPS) on the NASA Hypersonic Inflatable Aerodynamic Decelerator (HIAD). Structural models of the TPS consist of single or multiple orthotropic conical shell systems resting on several circumferential linear elastic supports. The shells in each model may have pinned (simply-supported) or elastically-supported edges. The Lagrangian is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the equations of motion. The natural modes of vibration and aeroelastic stability boundaries are found by calculating the eigenvalues and eigenvectors of a large coefficient matrix. When the in-flight configuration of the TPS is approximated as a single shell without elastic supports, asymmetric flutter in many circumferential waves is observed. When the elastic supports are included, the shell flutters symmetrically in zero circumferential waves. Structural damping is found to be important in this case. Aeroelastic models that consider the individual TPS layers as separate shells tend to flutter asymmetrically at high dynamic pressures relative to the single shell models. Several parameter studies also examine the effects of tension, orthotropicity, and elastic support stiffness.

  15. Examining Proximal and Distal Influences on the Part-Time Student Experience through an Ecological Systems Theory

    Science.gov (United States)

    McLinden, Mike

    2017-01-01

    This conceptual paper contributes to the literature base on promoting equality of opportunity for students in higher education through seeking to broaden understanding of the influences on part-time study in the United Kingdom (UK). These students constitute a significant proportion of the total student population in the UK with research…

  16. 77 FR 54806 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2012-09-06

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission.... Along with the adoption of the Filer Manual, we are amending Rule 301 of Regulation S-T to provide for...

  17. 75 FR 17853 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2010-04-08

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission... Yugoslavia. Along with adoption of the Filer Manual, we are amending Rule 301 of Regulation S-T to provide...

  18. 78 FR 4766 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2013-01-23

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Parts 232, 239, 249, 269, 274 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and.... Along with the adoption of the Filer Manual, we are amending Rule 301 of Regulation S-T to provide for...

  19. 78 FR 29616 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2013-05-21

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission... additional information. Along with the adoption of the Filer Manual, we are amending Rule 301 of Regulation S...

  20. 76 FR 73506 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2011-11-29

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission... allowed for the Period field. Along with the adoption of the Filer Manual, we are amending Rule 301 of...

  1. 77 FR 19077 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2012-03-30

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission... with the adoption of the Filer Manual, we are amending Rule 301 of Regulation S-T to provide for the...

  2. 76 FR 47438 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2011-08-05

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission... adoption of the Filer Manual, we are amending Rule 301 of Regulation S-T to provide for the incorporation...

  3. 78 FR 46256 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2013-07-31

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission...- dealers that can be provided under Item 6 to 2000. Along with the adoption of the Filer Manual, we are...

  4. Manual de Cocina y Nutricion (Handbook on Cooking and Nutrition).

    Science.gov (United States)

    Ruiz, Mercedes M., Ed.; Pavon, Elena S., Ed.

    This manual is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. Its objective is to strengthen reading and writing skills while teaching basic nutrition and food preparation techniques. The manual provides…

  5. 14 CFR 91.1023 - Program operating manual requirements.

    Science.gov (United States)

    2010-01-01

    ... English language. If the program manager furnishes all or part of the manual in other than printed form... maintenance information and instructions in the English language. (h) If a program manager conducts aircraft... Ownership Operations Program Management § 91.1023 Program operating manual requirements. (a) Each program...

  6. Agricultural Electricity. Electric Motors. Student Manual.

    Science.gov (United States)

    Benson, Robert T.

    Addressed to the student, this manual, which includes supplementary diagrams, discusses the following topics and principles: Electromagnetic fields, electromagnets, parts of an electric motor, determining speed of an electric motor, types of electric motors in common use (split-phase, capacitor, repulsion-induction, three-phase), the electric…

  7. Project WISP/Outreach: Parent Program Manual.

    Science.gov (United States)

    Flynn, Morita N.

    The manual sets forth guidelines on developing a parent involvement component as part of an early intervention effort for handicapped children. Modeled after Project WISP (Wyoming Infant Stimulation Program), the guidelines emphasize the role of the parent coordinator in communicating with parents and acting as a resource person. Parent…

  8. FDTD-ANT User Manual

    Science.gov (United States)

    Zimmerman, Martin L.

    1995-01-01

    This manual explains the theory and operation of the finite-difference time domain code FDTD-ANT developed by Analex Corporation at the NASA Lewis Research Center in Cleveland, Ohio. This code can be used for solving electromagnetic problems that are electrically small or medium (on the order of 1 to 50 cubic wavelengths). Calculated parameters include transmission line impedance, relative effective permittivity, antenna input impedance, and far-field patterns in both the time and frequency domains. The maximum problem size may be adjusted according to the computer used. This code has been run on the DEC VAX and 486 PC's and on workstations such as the Sun Sparc and the IBM RS/6000.

  9. Regional Test Center Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Burnham, Laurie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Christian Birk [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    The U.S. DOE Regional Test Center for Solar Technologies program was established to validate photovoltaic (PV) technologies installed in a range of different climates. The program is funded by the Energy Department's SunShot Initiative. The initiative seeks to make solar energy cost competitive with other forms of electricity by the end of the decade. Sandia National Laboratory currently manages four different sites across the country. The National Renewable Energy Laboratory manages a fifth site in Colorado. The entire PV portfolio currently includes 20 industry partners and almost 500 kW of installed systems. The program follows a defined process that outlines tasks, milestones, agreements, and deliverables. The process is broken out into four main parts: 1) planning and design, 2) installation, 3) operations, and 4) decommissioning. This operations manual defines the various elements of each part.

  10. The Causal-Compositional Concept of Information Part I. Elementary Theory: From Decompositional Physics to Compositional Information

    Directory of Open Access Journals (Sweden)

    Gerhard Luhn

    2012-03-01

    Full Text Available This first part of the study introduces an elementary concept of information. Our interest for newness, our curiosity in the new, will be considered as a main building block of information, and of reality itself. A typical definition of information (the reduction of uncertainty needs to be fundamentally inverted: Information is a compositional activity, including the inconsistent, the paradox, the contradiction and the incoherent meaning. This study expands on the analysis of the composition of new structure (new macrophysical laws, and the analysis of the causality and causal state of such structures (“causally active symbols”. The classical, scientific-objective, passive understanding of information gives meaning to the fact that modern information technology does not by itself lead to an increase of human values. However, our social and moral stance is an informational one, and our informational, active conscious process holds the power to mediate and to enforce this process towards an enriched life. The indicator for such enrichment is given to us by information, and the knowledge about this process will feed us with energy to move towards an active spirit of ethics, and towards the information society. Part I of this study expands on the fundament basis and on our intrinsic responsibility to release the forces that are based on the active dimension of information. Those forces are required in order to reveal the so-called information society from its metaphorical character (Part II.

  11. Between hermeneutics and datascapes: a critical appreciation of emergent landscape design theory and praxis through the writings of James Corner 1990-2000(Part One

    Directory of Open Access Journals (Sweden)

    Richard Weller

    2001-03-01

    Full Text Available This two-part essay examines the theoretical work of James Corner across the 1990s. Part one begins with a polemical analysis of Corner's originating notion of a hermeneutic practice of design as published in Landscape Journal in 1991. The essay necessarily broaches themes of ecology, critical regionalism and the broader panoramas of landscape planning as they are encountered in Corner's writings. Part one identifies an emergent dialectic between landscape architecture as scenography or infrastructure in his writings. In order to appreciate Corner's work, part one establishes and discusses the philosophical grounding of his position. Part one is concerned with theory, part two with praxis. Part two, following Corner's lead, summarises and comments upon some emerging design methods and specific design projects so as to situate the issues raised in part one. Part two begins with the unbuilt Parc de la Villette of 1982 by Rem Koolhaas and discusses its ramifications. Part two revolves around arguments put forward by Corner in the late 1990s for the agency of landscape design as structuring development rather than symbolising culture and nature, arguments tor what landscape design does not only what it means. To facilitate this, the writings of Bart Lootsma and Alex Wall who, along with Corner, presented the most pertinent and provocative themes in Corner's latest book Recovering Landscape: Essays in Contemporary Landscape Architecture, are considered in some detail. Part two concludes with thoughts on datascaping - a new design methodology synonymous with current trends in Dutch urbanism and one that impresses Corner with its capacity to manage and manipulate complex design programmes. Taken as a whole the essay offers neither a set of findings nor feigns conclusion; rather, it goes to the co-ordinates Corner has set out and explores the field they demarcate. The essay does, however, seek to qualify the claim that James Corner is articulating a

  12. Nuclear material operations manual

    Energy Technology Data Exchange (ETDEWEB)

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion.

  13. Netbooks The Missing Manual

    CERN Document Server

    Biersdorfer, J

    2009-01-01

    Netbooks are the hot new thing in PCs -- small, inexpensive laptops designed for web browsing, email, and working with web-based programs. But chances are you don't know how to choose a netbook, let alone use one. Not to worry: with this Missing Manual, you'll learn which netbook is right for you and how to set it up and use it for everything from spreadsheets for work to hobbies like gaming and photo sharing. Netbooks: The Missing Manual provides easy-to-follow instructions and lots of advice to help you: Learn the basics for using a Windows- or Linux-based netbookConnect speakers, printe

  14. Radar and ARPA manual

    CERN Document Server

    Bole, A G

    2013-01-01

    Radar and ARPA Manual focuses on the theoretical and practical aspects of electronic navigation. The manual first discusses basic radar principles, including principles of range and bearing measurements and picture orientation and presentation. The text then looks at the operational principles of radar systems. Function of units; aerial, receiver, and display principles; transmitter principles; and sitting of units on board ships are discussed. The book also describes target detection, Automatic Radar Plotting Aids (ARPA), and operational controls of radar systems, and then discusses radar plo

  15. Security electronics circuits manual

    CERN Document Server

    MARSTON, R M

    1998-01-01

    Security Electronics Circuits Manual is an invaluable guide for engineers and technicians in the security industry. It will also prove to be a useful guide for students and experimenters, as well as providing experienced amateurs and DIY enthusiasts with numerous ideas to protect their homes, businesses and properties.As with all Ray Marston's Circuits Manuals, the style is easy-to-read and non-mathematical, with the emphasis firmly on practical applications, circuits and design ideas. The ICs and other devices used in the practical circuits are modestly priced and readily available ty

  16. Manual therapy for asthma.

    Science.gov (United States)

    Hondras, M A; Linde, K; Jones, A P

    2005-04-18

    A variety of manual therapies with similar postulated biologic mechanisms of action are commonly used to treat patients with asthma. Manual therapy practitioners are also varied, including physiotherapists, respiratory therapists, chiropractic and osteopathic physicians. A systematic review across disciplines is warranted. To evaluate the evidence for the effects of manual therapies for treatment of patients with bronchial asthma. We searched for trials in computerized general (EMBASE, CINAHL and MEDLINE) and specialized databases (Cochrane Complementary Medicine Field, Cochrane Rehabilitation Field, Index to Chiropractic Literature (ICL), and Manual, Alternative and Natural Therapy (MANTIS)). In addition, we assessed bibliographies from included studies, and contacted authors of known studies for additional information about published and unpublished trials. Date of most recent search: August 2004. Trials were included if they: (1) were randomised; (2) included asthmatic children or adults; (3) examined one or more types of manual therapy; and (4) included clinical outcomes with observation periods of at least two weeks. All three reviewers independently extracted data and assessed trial quality using a standard form. From 473 unique citations, 68 full text articles were retrieved and evaluated, which resulted in nine citations to three RCTs (156 patients) suitable for inclusion. Trials could not be pooled statistically because studies that addressed similar interventions used disparate patient groups or outcomes. The methodological quality of one of two trials examining chiropractic manipulation was good and neither trial found significant differences between chiropractic spinal manipulation and a sham manoeuvre on any of the outcomes measured. One small trial compared massage therapy with a relaxation control group and found significant differences in many of the lung function measures obtained. However, this trial had poor reporting characteristics and the data

  17. Transmission pipeline calculations and simulations manual

    CERN Document Server

    Menon, E Shashi

    2014-01-01

    Transmission Pipeline Calculations and Simulations Manual is a valuable time- and money-saving tool to quickly pinpoint the essential formulae, equations, and calculations needed for transmission pipeline routing and construction decisions. The manual's three-part treatment starts with gas and petroleum data tables, followed by self-contained chapters concerning applications. Case studies at the end of each chapter provide practical experience for problem solving. Topics in this book include pressure and temperature profile of natural gas pipelines, how to size pipelines for specified f

  18. Polarization Dependent Bulk-sensitive Valence Band Photoemission Spectroscopy and Density Functional Theory Calculations: Part I. 3d Transition Metals

    Science.gov (United States)

    Ueda, Shigenori; Hamada, Ikutaro

    2017-12-01

    The X-ray polarization dependent valence band HAXPES spectra of 3d transition metals (TMs) of Ti-Zn were measured to investigate the orbital resolved electronic structures by utilizing that the fact the photoionization cross-section of the atomic orbitals strongly depends on the experimental geometry. We have calculated the HAXPES spectra, which correspond to the cross-section weighted densities of states (CSW-DOSs), where the DOSs were obtained by the density functional theory calculations, and we have determined the relative photoionization cross-sections of the 4s and 4p orbitals to the 3d orbital in the 3d TMs. The experimentally obtained bulk-sensitive 3d and 4s DOSs were good agreement with the calculated DOSs in Ti, V, Cr, and Cu. In contrast, the deviations between the experimental and calculated 3d DOSs for Mn, Fe, Co, Ni were found, suggesting that the electron correlation plays an important role in the electronic structures for these materials.

  19. A Game-Theory Based Incentive Framework for an Intelligent Traffic System as Part of a Smart City Initiative.

    Science.gov (United States)

    Mei, Haibo; Poslad, Stefan; Du, Shuang

    2017-12-11

    Intelligent Transportation Systems (ITSs) can be applied to inform and incentivize travellers to help them make cognizant choices concerning their trip routes and transport modality use for their daily travel whilst achieving more sustainable societal and transport authority goals. However, in practice, it is challenging for an ITS to enable incentive generation that is context-driven and personalized, whilst supporting multi-dimensional travel goals. This is because an ITS has to address the situation where different travellers have different travel preferences and constraints for route and modality, in the face of dynamically-varying traffic conditions. Furthermore, personalized incentive generation also needs to dynamically achieve different travel goals from multiple travellers, in the face of their conducts being a mix of both competitive and cooperative behaviours. To address this challenge, a Rule-based Incentive Framework (RIF) is proposed in this paper that utilizes both decision tree and evolutionary game theory to process travel information and intelligently generate personalized incentives for travellers. The travel information processed includes travellers' mobile patterns, travellers' modality preferences and route traffic volume information. A series of MATLAB simulations of RIF was undertaken to validate RIF to show that it is potentially an effective way to incentivize travellers to change travel routes and modalities as an essential smart city service.

  20. A Study of Active Rotor-Blade Vibration Control using Electro-Magnetic Actuation - Part I: Theory

    DEFF Research Database (Denmark)

    Christensen, Rene Hardam; Santos, Ilmar

    2004-01-01

    actuators fixed directly in the blades. However, due to the impracticability and problems by fixing actuators in the rotating blades, it is for practical application of great interest to study whether the vibrations can be controlled using shaft-based actuators, i.e. electro-magnetic bearings......This is the first paper in a two-part study on active rotor-blade vibration control. Blade faults are a major problem in bladed machines, such as turbines and compressors. Moreover, increasing demands for higher efficiency, lower weight and higher speed imply that blades become even more...... susceptible to vibrational problems. Passive damping methods, such as frictional damping, are typically used for this kind of machines, working very well at the specific design conditions. However, when the running conditions exceed the design specification, then passive damping devices become inefficient...

  1. NV/YMP RADIOLOGICAL CONTROL MANUAL

    Energy Technology Data Exchange (ETDEWEB)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE; BECHTEL NEVADA

    2004-11-01

    This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) and the Yucca Mountain Office of Repository Development (YMORD). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations Part 835 (10 CFR 835), Occupational Radiation Protection. Programs covered by this manual are located at the Nevada Test Site (NTS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Pleasanton, California; and at Andrews Air Force Base, Maryland. In addition, field work by NNSA/NSO at other locations is also covered by this manual.

  2. National Best Practices Manual for Building High Performance Schools

    Energy Technology Data Exchange (ETDEWEB)

    None

    2007-10-01

    The Best Practices Manual was written as a part of the promotional effort for EnergySmart Schools, provided by the US Department of Energy, to educate school districts around the country about energy efficiency and renewable energy.

  3. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-07-25

    The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.

  4. Drywall Finishing Manual.

    Science.gov (United States)

    Lengert, Gerald

    This manual, a self-study guide for apprentices in the drywall finishing trade in British Columbia, attempts to establish standards for the trade. It tells how to produce a properly taped and filled drywall surface and describes what that surface should look like. The standards emphasize quality work that can be realistically achieved on the job.…

  5. SNL Abuse Testing Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Orendorff, Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lamb, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steele, Leigh Anna Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the FreedomCAR Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND2005-3123).

  6. Peer Leadership Manual.

    Science.gov (United States)

    Lovell, Nikki; Hachmeister, Paula

    This is a manual for peer counselors and parents in an alcohol and drug abuse prevention program for teenagers. The document opens with the training objectives for the peer helpers: to know yourself, to be a resource, and to promote and establish a drug-free peer group and drug-free activities in school. Discussion on these topics is provided: (1)…

  7. Electrostatic Discharge Training Manual

    Science.gov (United States)

    1980-09-01

    NAVSEA SE 003-AA-TRN-OO LEYE V ELECTROSTATIC DISCHARGE TRAINING MANUAL s DTIC ,T OF I!ELECTE, ,4MA 0W\\R 9 981 E PUBLISHED BY DIRECTION OF COMMANDER...LABORATORY-TYPE DETECTORS SHOULD BE USED. IN SUMMARY, CHARACTERIS- TICS TO CONSIDER IN SELECTING AN ELECTROSTATIC DETECTOR ARE: o SENSITIVITY (MINIMUM

  8. CE Programmer's Manual.

    Science.gov (United States)

    Lund, Brishkai; McGechaen, Sandy

    Designed as a reference guide for continuing education planners, this manual provides basic information about the process of developing and delivering programs and courses. Material is organized to match job skills described in the systematic approach called DACUM--Designing a Curriculum--which reflects all skills required to be a continuing…

  9. Neem: A User's Manual

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 5. Neem: A User's Manual The 'Free Tree' – Its Healing Power and Other Uses. M D Subash Chandran. Book Review Volume 2 Issue 5 May 1997 pp 84-86. Fulltext. Click here to view fulltext PDF. Permanent link:

  10. Regulations and Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Young, Lydia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-09-30

    The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.

  11. Questionnaire Construction Manual

    Science.gov (United States)

    1976-07-01

    contained in this manual the following references may bt consulted. 1. Edwards , A. L. Techniques of attitude scale construction. New York: Appleton...516. d. Lorge, I. Predicting readability. Teachers College Record, 1944, 45, 404-419. e. Thorndike , !\\. L., & Lorge, R. the teacher’s word book of

  12. Housing Design : A Manual

    NARCIS (Netherlands)

    Uytenhaak, R.; Jürgenhake, B.; Nottrot, R.; Zondag, J.; Leupen, B.; Mooij, H.

    2011-01-01

    This manual sheds light on every aspect of designing housing. The organization of the living space and the residential building is dealt with systematically, from the breadth, depth, stacking, access to dwellings and the urban ensemble. This revised edition has been expanded with 20 new exemplary

  13. Community Education Training Manual.

    Science.gov (United States)

    Whetten, Clifford L.; Berridge, Robert I.

    This manual is intended for use primarily as a guide to assist in the planning, organization, and implementation of preservice and inservice training of community educators. The material presented here describes the goal, objectives, basic training and rationale, planning, activities, resources and equipment, and evaluation of each of five…

  14. Matematica 3. Manual.

    Science.gov (United States)

    D'Alu, Maria Jose Miranda de Sousa

    This teachers manual accompanies a mathematics textbook, written in Portuguese, for third graders. It closely follows the objectives and methodology of the major curricula used throughout the schools in the United States. The 11 chapters deal with: numeration (0-999,999); addition with and without regrouping; subtraction with and without…

  15. Manual de lexicologia anglesa

    OpenAIRE

    Balteiro, Isabel; Campos-Pardillos, Miguel Ángel

    2014-01-01

    Manual de lexicologia anglesa adaptat als continguts de l'assignatura "Lexicologia inglesa" del programa d'Estudis Anglesos de la Universitat d'Alacant. Servei de Llengües i Cultura, Universitat d'Alacant; Conselleria d'Educació.

  16. Fiscal Accounting Manual.

    Science.gov (United States)

    California State Dept. of Housing and Community Development, Sacramento. Indian Assistance Program.

    Written in simple, easy to understand form, the manual provides a vehicle for the untrained person in bookkeeping to control funds received from grants for Indian Tribal Councils and Indian organizations. The method used to control grants (federal, state, or private) is fund accounting, designed to organize rendering services on a non-profit…

  17. ORACLE Manual for Programmers

    Energy Technology Data Exchange (ETDEWEB)

    Atta, Susie E.

    1958-01-22

    The "ORACLE", Oak Ridge Automatic Computer and Logical Engine, was installed at Oak Ridge National Laboratory :in 1953 and.has been in operation since that time. This manual describes the machine's design, the number systems it uses, and its basic operations.

  18. Manual therapy for asthma.

    Science.gov (United States)

    Hondras, M A; Linde, K; Jones, A P

    2002-01-01

    A variety of manual therapies with similar postulated biologic mechanisms of action are commonly used to treat patients with asthma. Manual therapy practitioners are also varied, including physiotherapists, respiratory therapists, chiropractic and osteopathic physicians. A systematic review across disciplines is warranted. To evaluate the evidence for the effects of manual therapies for treatment of patients with bronchial asthma. Trials were searched in computerized general (EMBASE, CINAHL and MEDLINE) and specialized databases (Cochrane Complementary Medicine Field, Cochrane Rehabilitation Field, ICL, and MANTIS). In addition, bibliographies from included studies were assessed, and authors of known studies were contacted for additional information about published and unpublished trials. Date of most recent search: February 2002. Trials were included if they: (1) were randomised; (2) included asthmatic children or adults; (3) examined one or more types of manual therapy; and (4) included clinical outcomes. All three reviewers independently extracted data and assessed trial quality using a standard form. From 393 unique citations, 59 full text articles were retrieved and evaluated, which resulted in nine citations to five RCTs (290 patients) suitable for inclusion. Trials could not be pooled statistically because studies that addressed similar interventions used disparate patient groups or outcomes. The methodological quality of one of two trials examining chiropractic manipulation was good and neither trial found significant differences between chiropractic spinal manipulation and a sham manoeuvre on any of the outcomes measured. Quality of the remaining three trials was poor. One small trial compared massage therapy with a relaxation control group and found significant differences in many of the lung function measures obtained. However, this trial had poor reporting characteristics and the data have yet to be confirmed. One small trial compared chest

  19. Analytical transport network theory to guide the design of 3-D microstructural networks in energy materials: Part 2. Flow with reactions

    Science.gov (United States)

    Cocco, Alex P.; Chiu, Wilson K. S.

    2017-12-01

    We extend the fully analytical, heuristic "Analytical Transport Network Model" for steady-state, diffusive flow in a 3-D network to account for surface reactions. In the limit of negligible reactions, the model reduces to the conserved flow solution. The extension does not increase the time required to run the model, which in Part 1 was shown to be 0.5-1.5 and 5-6 orders of magnitude faster than electrochemical fin (ECF) theory and finite element analysis (FEA) for conserved flow, respectively. The model is compared to reacting-flow ECF and FEA as well as to experiments and is demonstrated as a potentially useful heuristic for understanding the influence of morphology and topology on reactive-diffusive flow through a 3-D microstructural network.

  20. Parallelization of analytical Hartree-Fock and density functional theory Hessian calculations. Part I: parallelization of coupled-perturbed Hartree-Fock equations

    Science.gov (United States)

    Korambath, Prakashan P.; Kong, Jing; Furlani, Thomas R.; Head-Gordon, Martin

    Solving the coupled-perturbed Hartree-Fock (CPHF) equations is the most time consuming part in the analytical computation of second derivatives of the molecular energy with respect to the nuclei. This paper describes a unique parallelization approach for solving the CPHF equations. The computational load is divided by the nuclear perturbations and distributed evenly among the computing nodes. The parallel algorithm is scalable with respect to the size of the molecule, i.e. the larger the molecule, the greater the parallel speedup. The memory storage requirements are also distributed among the processors, with little communication among the processors. The method is implemented in the Q-Chem software package and its performance is discussed. This work represents the first step in a research project to parallelize analytical frequency calculations at Hartree-Fock and density functional theory levels.

  1. Determination of lamb wave dispersion data in lossy anisotropic plates using time domain finite element analysis. Part I: theory and experimental verification.

    Science.gov (United States)

    Hayward, Gordon; Hyslop, Jamie

    2006-02-01

    A theoretical and experimental approach for extraction of guided wave dispersion data in plate structures is described. Finite element modeling is used to calculate the surface displacement data (in-plane and out-of-plane) when the plate is subject to either symmetrical or antisymmetrical impulsive force stimulation at one or both of the parallel faces. Fourier transformation of the resultant space-time displacement histories is then employed to obtain phase velocity as a function of frequency. Experimental verification in the case of antisymmetrical stimulation is provided by means of a high-power Q-switched laser source that is used to excite guided waves in the plate. The subsequent out-of-plane displacement data were then obtained by means of a scanning laser vibrometer, and good agreement between theory and experiment is demonstrated. Examples of dispersion data are provided for aluminum, and excellent correlation between the data sets and conventional Rayleigh-Lamb theory for plate structures was obtained. This was then extended to lossy polymeric plates, in addition to both unpolarized and polarized piezoelectric ceramic plates, again with good agreement between the finite element modeling and optical experiments. The last set of results prepares the way for a detailed investigation of the nonhomogeneous piezoelectric composite waveguides described in a companion paper (Part II).

  2. Citizen participation manual

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-13

    The Office of Consumer Affairs has the primary responsibility for managing and coordinating the public-participation efforts of the Department of Energy through public meetings, advisory committee participation, and other outreach mechanisms aimed at assuring all citizens an opportunity to participate in the governmental process relating to energy decisions. The Manual outlines the public-participation policy that should be followed by all offices. All offices are directed to observe the guidance in the manual in shaping and conducting public-participation activities, including the public-participation efforts required by DOE Order 2030, Procedures for the Development and Analysis of Regulations, Standards, and Guidelines. Two chapters included are: Determining Public Participation Needs and Public Participation Plan. (MCW)

  3. Large Hadron Collider manual

    CERN Document Server

    Lavender, Gemma

    2018-01-01

    What is the universe made of? How did it start? This Manual tells the story of how physicists are seeking answers to these questions using the world’s largest particle smasher – the Large Hadron Collider – at the CERN laboratory on the Franco-Swiss border. Beginning with the first tentative steps taken to build the machine, the digestible text, supported by color photographs of the hardware involved, along with annotated schematic diagrams of the physics experiments, covers the particle accelerator’s greatest discoveries – from both the perspective of the writer and the scientists who work there. The Large Hadron Collider Manual is a full, comprehensive guide to the most famous, record-breaking physics experiment in the world, which continues to capture the public imagination as it provides new insight into the fundamental laws of nature.

  4. Beyond the Manual Channel

    DEFF Research Database (Denmark)

    This collection of papers stems from the Sixth Workshop on the Representation and Processing of Sign Languages, held in May 2014 as a satellite to the Language Resources and Evaluation Conference in Reykjavik. While there has been occasional attention for sign languages at the main LREC conference......, the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the fourth time, the workshop had sign language corpora as its main topic. This time, the focus was on any aspect beyond...... the manual channel. Not surprisingly, most papers deal with non-manuals on the face. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

  5. Political Campaign Manual

    OpenAIRE

    Peter W Jones

    2004-01-01

    This manual is geared toward a campaign that is grassroots and democratic, actively engaging citizens and campaign volunteers. Such a campaign is ecological in its use of resources as well as in its policy positions. A people's campaign is one in which means and ends are harmoniously interwoven: the conduct of the campaign is fully reflective of the values and political positions of the candidate. It shows its commitment to social justice through inclusion of diverse citizens in its deliberat...

  6. X Python reference manual

    OpenAIRE

    Mullender, Sjoerd

    1995-01-01

    textabstractThis document describes the built-in types, exceptions, and functions of the X windows extension to Python. It assumes basic knowledge about the Python language and access to the X windows documentation. For an informal introduction to the language, see the Python Tutorial. The Python Reference Manual gives a more formal definition of the language. The Python Library Reference describes the built-in and standard modules of Python. This document can be seen as en extension to that ...

  7. tuProlog Manual

    OpenAIRE

    Denti, Enrico

    2015-01-01

    tuProlog is a light-weight Prolog system for distributed applications and infrastructures, intentionally designed around a minimal core extensible via libraries. tuProlog natively supports multi-paradigm programming, providing a clean, seamless integration model between Prolog and mainstream object-oriented languages -- namely Java, for tuProlog Java version, and any .NET-based language (C#, F#..), for tuProlog .NET version. This manual documents the tuProlog features as of version 2.5.

  8. Local and Global Parsing with Functional (FX-bar Theory and SCD Linguistic Strategy (I. Part I. FX-bar Schemes and Theory. Local and Global FX-bar Projections

    Directory of Open Access Journals (Sweden)

    Neculai Curteanu

    2006-05-01

    Full Text Available This paper surveys latest developments of SCD (Segmentation-Cohesion-Dependency linguistic strategy, with its basic components: FX-bar theory with local and (two extensions to global structures, the hierarchy graph of SCD marker classes, and improved versions of SCD algorithms for segmentation and parsing of local and global text structures. Briefly, Part I brings theoretical support (predicational feature and semantic diathesis for handing down the predication from syntactic to lexical level, introduces the new local / global FX-bar schemes (graphs for clause-level and discourse-level, the (global extension of dependency graph for SCD marker classes, the problem of (direct and inverse local FX-bar projection of the verbal group (verbal complex, and the FX-bar global projections, with the special case of sub-clausal discourse segments. Part II discusses the implications of the functional generativity concept for local and global markers, with a novel understanding on the taxonomy of text parsing algorithms, specifies the SCD marker classes, both at clause and discourse level, and presents (variants of SCD local and global segmentation / parsing algorithms, along with their latest running results.

  9. CLSI On-Line Public Catalog Touch Terminal Manual: Training Manual.

    Science.gov (United States)

    California State Univ., Chico.

    This training manual developed by the Public Access Subcommittee of the Reference Department of Meriam Library (California State University, Chico) provides instructions for using the library's online public catalog by means of a touch terminal which accepts commands in the form of a touch on a particular part of the terminal screen. Author and…

  10. Nuclear structure theory

    CERN Document Server

    Irvine, J M

    1972-01-01

    Nuclear Structure Theory provides a guide to nuclear structure theory. The book is comprised of 23 chapters that are organized into four parts; each part covers an aspect of nuclear structure theory. In the first part, the text discusses the experimentally observed phenomena, which nuclear structure theories need to look into and detail the information that supports those theories. The second part of the book deals with the phenomenological nucleon-nucleon potentials derived from phase shift analysis of nucleon-nucleon scattering. Part III talks about the phenomenological parameters used to de

  11. Timber designers' manual

    CERN Document Server

    Ozelton, E C

    2008-01-01

    This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

  12. IMAGE User Manual

    Energy Technology Data Exchange (ETDEWEB)

    Stehfest, E; De Waal, L; Oostenrijk, R.

    2010-09-15

    This user manual contains the basic information for running the simulation model IMAGE ('Integrated Model to Assess the Global Environment') of PBL. The motivation for this report was a substantial restructuring of the source code for IMAGE version 2.5. The document gives concise content information about the submodels, tells the user how to install the program, describes the directory structure of the run environment, shows how scenarios have to be prepared and run, and gives insight in the restart functionality.

  13. CMOS circuits manual

    CERN Document Server

    Marston, R M

    1995-01-01

    CMOS Circuits Manual is a user's guide for CMOS. The book emphasizes the practical aspects of CMOS and provides circuits, tables, and graphs to further relate the fundamentals with the applications. The text first discusses the basic principles and characteristics of the CMOS devices. The succeeding chapters detail the types of CMOS IC, including simple inverter, gate and logic ICs and circuits, and complex counters and decoders. The last chapter presents a miscellaneous collection of two dozen useful CMOS circuits. The book will be useful to researchers and professionals who employ CMOS circu

  14. Optoelectronics circuits manual

    CERN Document Server

    Marston, R M

    1999-01-01

    This manual is a useful single-volume guide specifically aimed at the practical design engineer, technician, and experimenter, as well as the electronics student and amateur. It deals with the subject in an easy to read, down to earth, and non-mathematical yet comprehensive manner, explaining the basic principles and characteristics of the best known devices, and presenting the reader with many practical applications and over 200 circuits. Most of the ICs and other devices used are inexpensive and readily available types, with universally recognised type numbers.The second edition

  15. California solar data manual

    Energy Technology Data Exchange (ETDEWEB)

    Berdahl, P.; Grether, D.; Martin, M.; Wahlig, M.

    1978-01-01

    Factors that determined the data contents of the manual are presented. Estimates of errors in the data are provided, and the impact of these errors on solar design is discussed. The state is divided into 15 solar zones of roughly similar solar radiation conditions, which are illustrated along with page references to the most relevant solar and climate data. A guide to the data tables and graphs is provided, which are displayed under solar, climate, and sky charts. A guide is given to simplified design methods to predict performance and cost of solar heating and cooling systems. (MHR)

  16. Health physics instrument manual

    Energy Technology Data Exchange (ETDEWEB)

    Gupton, E.D.

    1978-08-01

    The purpose of this manual is to provide apprentice health physics surveyors and other operating groups not directly concerned with radiation detection instruments a working knowledge of the radiation detection and measuring instruments in use at the Laboratory. The characteristics and applications of the instruments are given. Portable instruments, stationary instruments, personnel monitoring instruments, sample counters, and miscellaneous instruments are described. Also, information sheets on calibration sources, procedures, and devices are included. Gamma sources, beta sources, alpha sources, neutron sources, special sources, a gamma calibration device for badge dosimeters, and a calibration device for ionization chambers are described. (WHK)

  17. Timergenerator circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Timer/Generator Circuits Manual is an 11-chapter text that deals mainly with waveform generator techniques and circuits. Each chapter starts with an explanation of the basic principles of its subject followed by a wide range of practical circuit designs. This work presents a total of over 300 practical circuits, diagrams, and tables.Chapter 1 outlines the basic principles and the different types of generator. Chapters 2 to 9 deal with a specific type of waveform generator, including sine, square, triangular, sawtooth, and special waveform generators pulse. These chapters also include pulse gen

  18. Optoelectronics circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Optoelectronics Circuits Manual covers the basic principles and characteristics of the best known types of optoelectronic devices, as well as the practical applications of many of these optoelectronic devices. The book describes LED display circuits and LED dot- and bar-graph circuits and discusses the applications of seven-segment displays, light-sensitive devices, optocouplers, and a variety of brightness control techniques. The text also tackles infrared light-beam alarms and multichannel remote control systems. The book provides practical user information and circuitry and illustrations.

  19. Percept User Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Carnes, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennon, Stephen Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    This document is the main user guide for the Sierra/Percept capabilities including the mesh_adapt and mesh_transfer tools. Basic capabilities for uniform mesh refinement (UMR) and mesh transfers are discussed. Examples are used to provide illustration. Future versions of this manual will include more advanced features such as geometry and mesh smoothing. Additionally, all the options for the mesh_adapt code will be described in detail. Capabilities for local adaptivity in the context of offline adaptivity will also be included. This page intentionally left blank.

  20. RADTRAN 6 Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  1. RADTRAN 6 technical manual.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  2. Modern TTL circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Modern TTL Circuits Manual provides an introduction to the basic principles of Transistor-Transistor Logic (TTL). This book outlines the major features of the 74 series of integrated circuits (ICs) and introduces the various sub-groups of the TTL family.Organized into seven chapters, this book begins with an overview of the basics of digital ICs. This text then examines the symbology and mathematics of digital logic. Other chapters consider a variety of topics, including waveform generator circuitry, clocked flip-flop and counter circuits, special counter/dividers, registers, data latches, com

  3. National Best Practices Manual for Building High Performance Schools (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    2007-10-01

    The Best Practices Manual was written as a part of the promotional effort for EnergySmart Schools, provided by the US Department of Energy, to educate school districts around the country about energy efficiency and renewable energy. Written specifically for architects and engineers, The Best Practices Manual is designed to help those who are responsible for designing or retrofitting schools, as well as their project managers. This manual will help design staff make informed decisions about energy and environmental issues important to the school systems and communities.

  4. Energy statistics manual

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Manual is written in a question-and-answer format. The points developed are introduced with a basic question, such as: What do people mean by 'fuels' and 'energy'? What units are used to express oil? How are energy data presented? Answers are given in simple terms and illustrated by graphs, charts and tables. More technical explanations are found in the annexes. The Manual contains seven chapters. The first one presents the fundamentals of energy statistics, five chapters deal with the five different fuels (electricity and heat; natural gas; oil; solid fuels and manufactured gases; renewables and waste) and the last chapter explains the energy balance. Three technical annexes and a glossary are also included. For the five chapters dedicated to the fuels, there are three levels of reading: the first one contains general information on the subject, the second one reviews issues which are specific to the joint IEA/OECD-Eurostat-UNECE questionnaires and the third one focuses on the essential elements of the subject. 43 figs., 22 tabs., 3 annexes.

  5. SYVAC3 manual

    Energy Technology Data Exchange (ETDEWEB)

    Andres, T.H

    2000-07-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  6. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  7. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  8. MELCOR computer code manuals

    Energy Technology Data Exchange (ETDEWEB)

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  9. Solutions manual to accompany Nonlinear programming

    CERN Document Server

    Bazaraa, Mokhtar S; Shetty, C M

    2014-01-01

    As the Solutions Manual, this book is meant to accompany the main title, Nonlinear Programming: Theory and Algorithms, Third Edition. This book presents recent developments of key topics in nonlinear programming (NLP) using a logical and self-contained format. The volume is divided into three sections: convex analysis, optimality conditions, and dual computational techniques. Precise statements of algortihms are given along with convergence analysis. Each chapter contains detailed numerical examples, graphical illustrations, and numerous exercises to aid readers in understanding the concepts a

  10. Team Member Training Manual.

    Science.gov (United States)

    1998-07-01

    by those who studied human behavior. Behaviorists such as Abraham Maslow, and Frederick Herzberg developed theories of motivation which share much of...tried, but were never totally effective. Fear, reward, slavery, and freedom have all been tried as motivators. FREDERICK TAYLOR The earliest modern...research into motivation and how to do things in a working environment was done by Frederick Taylor. His theories were gleaned from his studies of

  11. Lattice theory

    CERN Document Server

    Birkhoff, Garrett

    1940-01-01

    Since its original publication in 1940, this book has been revised and modernized several times, most notably in 1948 (second edition) and in 1967 (third edition). The material is organized into four main parts: general notions and concepts of lattice theory (Chapters I-V), universal algebra (Chapters VI-VII), applications of lattice theory to various areas of mathematics (Chapters VIII-XII), and mathematical structures that can be developed using lattices (Chapters XIII-XVII). At the end of the book there is a list of 166 unsolved problems in lattice theory, many of which still remain open. I

  12. Camp Health Aide Manual = Manual para trabajadores de salud.

    Science.gov (United States)

    Robinson, June Grube; And Others

    This bilingual manual serves as a textbook for migrant Camp Health Aides. Camp Health Aides are members of migrant labor camps enlisted to provide information about health and social services to migrant workers and their families. The manual is divided into 12 tabbed sections representing lessons. Teaching notes printed on contrasting paper…

  13. Ciencias 2. Manual do Professor (Science Teacher's Manual).

    Science.gov (United States)

    Raposo, Lucilia

    This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

  14. Acquisition of Dental Skills in Preclinical Technique Courses: Influence of Spatial and Manual Abilities

    Science.gov (United States)

    Schwibbe, Anja; Kothe, Christian; Hampe, Wolfgang; Konradt, Udo

    2016-01-01

    Sixty years of research have not added up to a concordant evaluation of the influence of spatial and manual abilities on dental skill acquisition. We used Ackerman's theory of ability determinants of skill acquisition to explain the influence of spatial visualization and manual dexterity on the task performance of dental students in two…

  15. Persistence theory

    CERN Document Server

    Oudot, Steve Y

    2015-01-01

    Persistence theory emerged in the early 2000s as a new theory in the area of applied and computational topology. This book provides a broad and modern view of the subject, including its algebraic, topological, and algorithmic aspects. It also elaborates on applications in data analysis. The level of detail of the exposition has been set so as to keep a survey style, while providing sufficient insights into the proofs so the reader can understand the mechanisms at work. The book is organized into three parts. The first part is dedicated to the foundations of persistence and emphasizes its conne

  16. Aerobic Digestion. Student Manual. Biological Treatment Process Control.

    Science.gov (United States)

    Klopping, Paul H.

    This manual contains the textual material for a single-lesson unit on aerobic sludge digestion. Topic areas addressed include: (1) theory of aerobic digestion; (2) system components; (3) performance factors; (4) indicators of stable operation; and (5) operational problems and their solutions. A list of objectives, glossary of key terms, and…

  17. Nutrition Education, Manual for Teachers. Health Education: Physical Dimension of Health.

    Science.gov (United States)

    New York State Education Dept., Albany. Bureau of School Health Education and Services.

    This teachers' manual provides nutrition information and guidance to facilitate nutrition learning experiences for children and youth. The manual is organized into six parts as follows: Parts one through four provide teachers of primary and intermediate grades, and junior and senior high school with an overview of nutrition education, the goals…

  18. GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 1: Theory and method

    Science.gov (United States)

    Shih, T. I.-P.; Bailey, R. T.; Nguyen, H. L.; Roelke, R. J.

    1990-01-01

    modifications are needed in the grid generation part of the program. This technical memorandum describes the theory and method used in GRID2D/3D.

  19. TWOZONE users manual

    Energy Technology Data Exchange (ETDEWEB)

    Gadgil, A.J.; Gibson, G.; Rosenfeld, A.H.

    1978-03-01

    TWOZONE is a computer program written in the summer of 1975 to analyze the heating and cooling loads of single family residences for the purpose of investigating the effect on energy consumption of various changes in building design, construction and management. The program evaluates the annual energy demand taking into account: various amounts, types and location of glass areas in a house; different wall and roof constructions; various amounts and locations of insulation; scheduled thermostat settings; and other changes in the building envelope. The model differentiates between the thermal behavior of the north and south zones of a house (hence the name TWOZONE). This manual describes the most recent version of TWOZONE which includes many new features (e.g., ventilation strategies, evaporative cooler, improved air-conditioner algorithm, ability to read Cal-ERDA weather tapes, user-specified tilting of the roof, an economics subroutine etc.).

  20. Pressure vessel design manual

    CERN Document Server

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  1. GRSAC Users Manual

    Energy Technology Data Exchange (ETDEWEB)

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  2. Google The Missing Manual

    CERN Document Server

    Milstein, Sarah; Dornfest, Rael; MacDonald, Matthew

    2008-01-01

    Google.com is one of the most popular sites on the Internet and is used around the world by millions of people every day. Sure, you know how to "Google it" when you're searching for something--anything!--on the Web. It's plenty fast and easy to use. But did you know how much more you could achieve with the world's best search engine by clicking beyond the "Google Search" button? While you can interface with Google in 97 languages and glean results in 35, you can't find any kind of instruction manual from Google. Lucky for you, our fully updated and greatly expanded second edition to the best

  3. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  4. FRMAC Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  5. New Oxford style manual

    CERN Document Server

    2012-01-01

    The New Oxford Style Manual brings together two essential reference works in a single volume: New Hart's Rules and the New Oxford Dictionary for Writers and Editors. New Hart's Rules, Oxford's definitive guide to style, consists of 20 chapters that provide authoritative and expert advice on how to prepare copy for publication. Topics covered include how to use italic, roman, and other type treatments, numbers and dates, law and legal references, illustrations, notes and references, and bibliographies. The guidelines are complemented by the New Oxford Dictionary for Writers and Editors, which features 25,000 alphabetically arranged entries giving authoritative advice on those words and names which raise questions time and time again because of spelling, capitalization, hyphenation, or cultural and historical context. Entries give full coverage of recommended spellings, variant forms, confusable words, hyphenation, capitalization, foreign and specialist terms, proper names, and abbreviations. The dictionary a...

  6. Manual on best practices

    DEFF Research Database (Denmark)

    Oxlund, Bjarke

    Der er mange måder at imødegå den globale hiv/aids epidemi på, men ikke alle tilgange virker lige godt. 'Best practices' er blevet lanceret af UNAIDS og andre som et værktøj til at sikre, at kun de mest effektive og virkningsfulde interventioner bliver promoveret i hiv/aids forebyggelse, behandling......, pleje og støtte. Det store spørgsmål er, hvad der kendetegner 'best practice', og hvordan NGOer kan anvende begrebet? Det er blot et af de mange spørgsmål som denne manual om hiv og aids interventioner for og med børn og unge i lavindkomstlande beskæftiger sig med....

  7. Demonstration and Validation Assets: User Manual Development

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-06-30

    This report documents the development of a database-supported user manual for DEMVAL assets in the NSTI area of operations and focuses on providing comprehensive user information on DEMVAL assets serving businesses with national security technology applications in southern New Mexico. The DEMVAL asset program is being developed as part of the NSPP, funded by both Department of Energy (DOE) and NNSA. This report describes the development of a comprehensive user manual system for delivering indexed DEMVAL asset information to be used in marketing and visibility materials and to NSTI clients, prospective clients, stakeholders, and any person or organization seeking it. The data about area DEMVAL asset providers are organized in an SQL database with updateable application structure that optimizes ease of access and customizes search ability for the user.

  8. Surface Water Treatment Workshop Manual.

    Science.gov (United States)

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to increase the knowledge of experienced water treatment plant operators. Each of the fourteen lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in this manual include: basic water…

  9. Technical Manual: Handwriting Research Corporation.

    Science.gov (United States)

    Robinson, Sharon E.; Hopper, Mark A.

    This technical manual discusses some of the recent developments in the science of graphology and their implications for the science. The manual contains the following sections: (1) Graphology: An Introduction; (2) "CHAPS": Computerized Handwriting Analysis Profiling Systems; (3) HRC Profiles; (4) Reliability; (5) Validity; (6) Historical…

  10. Manual testing for ankle instability.

    Science.gov (United States)

    Wilkin, Emily Jane; Hunt, Adrienne; Nightingale, Elizabeth Jean; Munn, Joanne; Kilbreath, Sharon Lynne; Refshauge, Kathryn Margaret

    2012-12-01

    To assess inter-rater reliability of ankle manual tests. We also correlated the manual tests with the Cumberland Ankle Instability Tool (CAIT). One ankle from each of 60 participants was assessed using four different manual tests (anterior drawer in supine and crook lying, talar tilt, inversion tilt). Three different raters, varying in experience, tested each participant. The CAIT questionnaire was also administered. The study received ethics approval from the University of Sydney Human Research Ethics Committee. Intraclass correlation coefficients (ICC), standard error of the mean (SEM) and percent close agreement (PCA) were used to determine reliability of the four tests. Pearson's correlation coefficients were used to determine relationships between the manual tests and CAIT scores. Inter-rater reliability for the four manual tests was poor regardless of therapist's experience (ICC([1,1]) -0.12 to 0.33; SEM 0.93-1.69). Correlations between the CAIT and manual tests were also low varying between r = -0.12 and -0.42. Inter-rater reliability was poor for manual tests of ankle stability. Reliability may be improved by using a grading scale with fewer intervals. The CAIT scores and manual tests correlated poorly, potentially reflecting the variety of conditions leading to ankle instability. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

  11. Wastewater Treatment I. Instructor's Manual.

    Science.gov (United States)

    California Water Pollution Control Association, Sacramento. Joint Education Committee.

    This instructor's manual provides an outline and guide for teaching Wastewater Treatment I. It consists of nine sections. An introductory note and a course outline comprise sections 1 and 2. Section 3 (the bulk of the guide) presents lesson outlines for teaching the ten chapters of the manual entitled "Operation of Wastewater Treatment…

  12. Temporal scattering and response software users' manual, version 2 and 3

    Science.gov (United States)

    McLeod, R. R.

    1992-06-01

    This manual gives complete information on how to use the TSAR electromagnetic analysis software. Included are descriptions of input files, the details of how these files affect the problem, and output data specifications. What is not included is the theory of the finite-difference time-domain (FDTD) algorithm or details of the TSAR implementation of it. This manual assumes that readers are sufficiently familiar with FDTD that they only need the 'how to' knowledge presented here. This is a reference manual rather than a tutorial manual. To help new users become familiar with the TSAR software, a set of example problems is included with the TSAR distribution.

  13. Calibrating the Medical Council of Canada’s Qualifying Examination Part I using an integrated item response theory framework: a comparison of models and designs

    Directory of Open Access Journals (Sweden)

    Andre F. De Champlain

    2016-01-01

    Full Text Available Purpose: The aim of this research was to compare different methods of calibrating multiple choice question (MCQ and clinical decision making (CDM components for the Medical Council of Canada’s Qualifying Examination Part I (MCCQEI based on item response theory. Methods: Our data consisted of test results from 8,213 first time applicants to MCCQEI in spring and fall 2010 and 2011 test administrations. The data set contained several thousand multiple choice items and several hundred CDM cases. Four dichotomous calibrations were run using BILOG-MG 3.0. All 3 mixed item format (dichotomous MCQ responses and polytomous CDM case scores calibrations were conducted using PARSCALE 4. Results: The 2-PL model had identical numbers of items with chi-square values at or below a Type I error rate of 0.01 (83/3,499 or 0.02. In all 3 polytomous models, whether the MCQs were either anchored or concurrently run with the CDM cases, results suggest very poor fit. All IRT abilities estimated from dichotomous calibration designs correlated very highly with each other. IRT-based pass-fail rates were extremely similar, not only across calibration designs and methods, but also with regard to the actual reported decision to candidates. The largest difference noted in pass rates was 4.78%, which occurred between the mixed format concurrent 2-PL graded response model (pass rate= 80.43% and the dichotomous anchored 1-PL calibrations (pass rate= 85.21%. Conclusion: Simpler calibration designs with dichotomized items should be implemented. The dichotomous calibrations provided better fit of the item response matrix than more complex, polytomous calibrations.

  14. Complexity Theory

    Science.gov (United States)

    Lee, William H K.

    2016-01-01

    A complex system consists of many interacting parts, generates new collective behavior through self organization, and adaptively evolves through time. Many theories have been developed to study complex systems, including chaos, fractals, cellular automata, self organization, stochastic processes, turbulence, and genetic algorithms.

  15. Psychological reactance theory (3)

    OpenAIRE

    Fukada, Hiromi

    1999-01-01

    The purpose of this paper was to describe psychological reactance theory in detail and discuss and refine the theory. The paper consists of following two parts. 9. Effects of reactance 10. Attitudinal freedoms

  16. ARS-Media for excel instruction manual

    Science.gov (United States)

    ARS-Media for Excel Instruction Manual is the instruction manual that explains how to use the Excel spreadsheet ARS-Media for Excel application. ARS-Media for Excel Instruction Manual is provided as a pdf file....

  17. Operation Manual of the high voltage generator of the Pelletron electron accelerator; Manual de operacion del generador de alto voltaje del acelerador de electrones Pelletron

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez M, V.; Lopez V, H.; Alba P, U

    1988-04-15

    The first version of a manual to operate the generator of high voltage generator of the Pelletron electron accelerator built in the ININ is presented. Since this generator has several components and/or elements, the one manual present has the purpose that the armed one or maintenance of anyone on its parts, is carried out in an orderly and efficient way. (Author)

  18. Concept theory

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2009-01-01

      Concept theory is an extremely broad, interdisciplinary and complex field of research related to many deep fields with very long historical traditions without much consensus. However, information science and knowledge organization cannot avoid relating to theories of concepts. Knowledge...... organizing systems (e.g. classification systems, thesauri and ontologies) should be understood as systems basically organizing concepts and their semantic relations. The same is the case with information retrieval systems. Different theories of concepts have different implications for how to construe......). It is also argued that the historicist and pragmatist understandings of concepts are the most fruitful views and that this understanding may be part of a broader paradigm shift that is also beginning to take place in information science.  The importance of historicist and pragmatic theories of concepts...

  19. JSATS Decoder Software Manual

    Energy Technology Data Exchange (ETDEWEB)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  20. Manual braille writer

    Science.gov (United States)

    Hawk, Lawrence S.; Turner, Joe H.

    1992-01-01

    A manual-type braille writer that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted.

  1. A Selected Review of the Underpinnings of Ethics for Human Performance Technology Professionals--Part One: Key Ethical Theories and Research.

    Science.gov (United States)

    Dean, Peter J.

    1993-01-01

    Provides a review of the key ethical theories and relevant empirical research relating to the practice of human performance technology. Topics addressed include ethics, morals, business ethics, ethics officers, empiricism versus normative ethical theory, consequentialism, utilitarianism, nonconsequentialism, Kohlberg model of cognitive moral…

  2. A Study of General Education Astronomy Students' Understandings of Cosmology. Part III. Evaluating Four Conceptual Cosmology Surveys: An Item Response Theory Approach

    Science.gov (United States)

    Wallace, Colin S.; Prather, Edward E.; Duncan, Douglas K.

    2012-01-01

    This is the third of five papers detailing our national study of general education astronomy students' conceptual and reasoning difficulties with cosmology. In this paper, we use item response theory to analyze students' responses to three out of the four conceptual cosmology surveys we developed. The specific item response theory model we use is…

  3. Dilemma-focused intervention for unipolar depression: a treatment manual.

    Science.gov (United States)

    Feixas, Guillem; Compañ, Victoria

    2016-07-12

    This article introduces a new treatment protocol for depression. Based on previous research which indicated the presence of cognitive conflicts in depression, this study created an intervention manual to address these conflicts. The therapy manual for depressive patients followed the guideline for inclusion in clinical trials (stage II), which has received high recognition. A preliminary version (stage I) of this manual was formulated based on other, more general dilemma-focused therapy publications, inspired by personal construct theory (PCT), and input from clinical experience. The resulting version was then applied during the 8-session format of a pilot study with patients diagnosed with major depressive disorder or dysthymia. Finally, feedback was requested from seasoned and highly respected therapists, some of whom were familiar with PCT. According to the mentioned guideline, the intervention manual selected the theoretical framework, in this case PCT, to include its conceptualization of depression and resolution of dilemmas (to foster clinical improvement) as a main treatment goal. The manual was then contrasted with psychoanalytic psychotherapy, cognitive-behavior therapy (CBT), motivational interviewing (MI), and other similar approaches such as cognitive-analytic therapy and coherence therapy. Following these conceptual clarifications, the specific interventions included in the manual were defined according to both categories: their unique and essential components and those conceived as common psychotherapeutic factors. Next, the general structure and content for each session were presented. The structure consisted of seven well-defined individual sessions with an additional session, which could complement any of the former sessions to address the patient's issues in greater depth, if needed. This Dilemma-Focused Intervention manual aimed to improve the treatment outcome for depression by offering an intervention that could be combined with other general

  4. Manual Labour as praxis pietatis

    DEFF Research Database (Denmark)

    Bruun, Mette Birkedal

    2007-01-01

    This article describes the role played by the topos of manual labour in the Cistercian reform at La Trappe in the 1660s. According to the reformer Armand-Jean de Rancé, manual labour serves partly as a link from the reform to the Rule of Benedict's prescriptions about opus manuum, partly as an ep...... as an epitome of the biblical definition of the post-lapsarian condition as a matter of eating bread by the sweat of one's face and finally as a device for the cultivation of monastic humility and penitence....

  5. Nevada National Security Site Radiological Control Manual

    Energy Technology Data Exchange (ETDEWEB)

    Radiological Control Managers’ Council

    2012-03-26

    This document supersedes DOE/NV/25946--801, 'Nevada Test Site Radiological Control Manual,' Revision 1 issued in February 2010. Brief Description of Revision: A complete revision to reflect a recent change in name for the NTS; changes in name for some tenant organizations; and to update references to current DOE policies, orders, and guidance documents. Article 237.2 was deleted. Appendix 3B was updated. Article 411.2 was modified. Article 422 was re-written to reflect the wording of DOE O 458.1. Article 431.6.d was modified. The glossary was updated. This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE) and the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection.' Programs covered by this manual are located at the Nevada National Security Site (NNSS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Livermore, California; and Andrews Air Force Base, Maryland. In addition, fieldwork by NNSA/NSO at other locations is covered by this manual. Current activities at NNSS include operating low-level radioactive and mixed waste disposal facilities for United States defense-generated waste, assembly and execution of subcritical experiments, assembly/disassembly of special experiments, the storage and use of special nuclear materials, performing criticality experiments, emergency responder training, surface cleanup and site characterization of contaminated land areas, environmental activity by the University system, and nonnuclear test operations, such as controlled spills of hazardous materials at the Hazardous Materials Spill Center. Currently, the major potential for occupational radiation exposure is associated with the burial of

  6. What genre theory does

    DEFF Research Database (Denmark)

    Andersen, Jack

    2015-01-01

    Purpose To provide a small overview of genre theory and its associated concepts and to show how genre theory has had its antecedents in certain parts of the social sciences and not in the humanities. Findings The chapter argues that the explanatory force of genre theory may be explained with its...... emphasis on everyday genres, de facto genres. Originality/value By providing an overview of genre theory, the chapter demonstrates the wealth and richness of forms of explanations in genre theory....

  7. Manual on indoor air quality

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, R.C.; Grimsrud, D.T.

    1983-12-01

    This reference manual was prepared to assist electric utilities in helping homeowners, builders, and new home buyers to understand a broad range of issues related to indoor air quality. The manual is directed to technically knowledgeable persons employed by utility companies - the customer service or marketing representative, applications engineer, or technician - who may not have specific expertise in indoor air quality issues. In addition to providing monitoring and control techniques, the manual summarizes the link between pollutant concentrations, air exchange, and energy conservation and describes the characteristics and health effects of selected pollutants. Where technical information is too lengthy or complex for inclusion in this volume, reference sources are given. Information for this manual was gathered from technical studies, manufacturers' information, and other materials from professional societies, institutes, and associations. The aim has been to provide objective technical and descriptive information that can be used by utility personnel to make informed decisions about indoor air quality issues.

  8. Surface Environmental Surveillance Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  9. Genetic variation: a laboratory manual

    National Research Council Canada - National Science Library

    Weiner, Michael P; Gabriel, Stacey B; Stephens, J. Claiborne

    2007-01-01

    ... alterations, including copy number variation. The early sections of the manual are devoted to study design and generating genotype data, the use of resources such as HapMap and dbSNP, as well as experimental, statistical, and bioinformatic...

  10. Construction inspection manual of procedures

    Science.gov (United States)

    2009-01-01

    This manual provides highway construction personnel with relevant, practical information in order to perform accurate inspections and provide relevant construction procedural information for the various roadway and structures items of work. It is the...

  11. State Energy Program Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Office of Building Technology, State and Community Programs

    1999-03-17

    The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

  12. Diana Reference Manual. Revision 3,

    Science.gov (United States)

    1983-02-28

    private -To be filled in... ead Diana ; External Representation of DIANA Page 145 CHAPTER 5 EXTERNAL REPRESENTATION OF DIANA This chapter describes how a...1 1 mml L.~ 2 .i i .- . .... c7- 0/0 04 TARTAN LABORATOR4IES *dOORPORATED 00 N DIANA REFERENCE MANUAL Revision 3 Arthur Evans Jr. MCC Kenneth J...Butler Tartan Laboratories Incorporated Editors. Revised Diana Reference Manual G0. GOOD Inatitut fuer Informatik 11. Universitmet Karlsruhe Win. A. Wuif

  13. Controlatron Neutron Tube Test Suite Software Manual - Operation Manual (V2.2)

    CERN Document Server

    Noel, W P; Hertrich, R J; Martinez, M L; Wallace, D L

    2002-01-01

    The Controlatron Software Suite is a custom built application to perform automated testing of Controlatron neutron tubes. The software package was designed to allowing users to design tests and to run a series of test suites on a tube. The data is output to ASCII files of a pre-defined format for data analysis and viewing with the Controlatron Data Viewer Application. This manual discusses the operation of the Controlatron Test Suite Software and a brief discussion of state machine theory, as state machine is the functional basis of the software.

  14. Probability theory

    CERN Document Server

    S Varadhan, S R

    2001-01-01

    This volume presents topics in probability theory covered during a first-year graduate course given at the Courant Institute of Mathematical Sciences. The necessary background material in measure theory is developed, including the standard topics, such as extension theorem, construction of measures, integration, product spaces, Radon-Nikodym theorem, and conditional expectation. In the first part of the book, characteristic functions are introduced, followed by the study of weak convergence of probability distributions. Then both the weak and strong limit theorems for sums of independent rando

  15. Acadia: A Working Manual.

    Science.gov (United States)

    Project Adventure, Hamilton, MA.

    The workbook of field ecology is for use by high school science students participating in two and one-half day weekend trips to Acadia National Park, Maine, as part of Project Adventure, an interdisciplinary program aimed at educating the whole student through experienced-based learning in academics and a physical education program in the…

  16. ACT Plan: Technical Manual. 2013/2014

    Science.gov (United States)

    ACT, Inc., 2013

    2013-01-01

    This manual contains information about the American College Test (ACT) Plan® program. The principal focus of this manual is to document the Plan program's technical adequacy in light of its intended purposes. This manual supersedes the 2011 edition. The content of this manual responds to requirements of the testing industry as established in the…

  17. Pressure vessel design manual

    Energy Technology Data Exchange (ETDEWEB)

    Moss, D.R.

    1987-01-01

    The first section of the book covers types of loadings, failures, and stress theories, and how they apply to pressure vessels. The book delineates the procedures for designing typical components as well as those for designing large openings in cylindrical shells, ring girders, davits, platforms, bins and elevated tanks. The techniques for designing conical transitions, cone-cylinder intersections, intermediate heads, flat heads, and spherically dished covers are also described. The book covers the design of vessel supports subject to wind and seismic loads and one section is devoted to the five major ways of analyzing loads on shells and heads. Each procedure is detailed enough to size all welds, bolts, and plate thicknesses and to determine actual stresses.

  18. Dry kiln operator's manual

    Science.gov (United States)

    William T. Simpson

    1991-01-01

    The modern dry kiln is a unique product of research, development, and experience. It is the only practical means now in wide use for rapid, high- volume drying of lumber to conditions necessary for maximum serviceability in housing, furniture, millwork, and many other wood products. As part of our charge to help further the efficient utilization of our nation’s timber...

  19. Manual fire fighting tactics at Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Jee, Moon Hak; Moon, Chan Kook [Korea Hydro and Nuclear Power, Daejeon (Korea, Republic of)

    2012-05-15

    The general requirements of fire protection at nuclear power plant (NPP) are fire protection program, fire hazard analysis, and fire prevention features. In addition, specific fire protection requirements such as water supplies, fire detection, fire protection of safe related equipment, and safe shutdown capabilities must be provided. Particularly, manual fire fighting is required as specific requirements with the provisions to secure manual fire suppression, fire brigade and its training, and administrative controls for manual fire fighting. If a fire is alarmed and confirmed to be a real fire, the fire brigade must take manual fire fighting activities as requested at fire protection program. According to the present requirements in itself, there is not any specific manual fire fighting ways or practical strategies. In general, fire zones or compartments at NPPs are built in a confined condition. In theory, the fire condition will change from a combustible-controlled fire to a ventilation-governing fire with the time duration. In case of pool fire with the abundant oxygen and flammable liquid, it can take just a few minutes for the flash-over to occur. For the well-confined fire zone, it will change from a flame fire to a smoldering state before the entrance door is opened by the fire brigade. In this context, the manual fire fighting activities must be based on a quantitative analysis and a fire risk evaluation. At this paper, it was suggested that the fire zones at NPPs should be grouped on the inherent functions and fire characteristics. Based on the fire risk characteristics and the fire zone grouping, the manual fire fighting tactics are suggested as an advanced fire fighting solution

  20. Manual vs. computer-assisted sperm analysis: can CASA replace manual assessment of human semen in clinical practice?

    Science.gov (United States)

    Talarczyk-Desole, Joanna; Berger, Anna; Taszarek-Hauke, Grażyna; Hauke, Jan; Pawelczyk, Leszek; Jedrzejczak, Piotr

    2017-01-01

    The aim of the study was to check the quality of computer-assisted sperm analysis (CASA) system in comparison to the reference manual method as well as standardization of the computer-assisted semen assessment. The study was conducted between January and June 2015 at the Andrology Laboratory of the Division of Infertility and Reproductive Endocrinology, Poznań University of Medical Sciences, Poland. The study group consisted of 230 men who gave sperm samples for the first time in our center as part of an infertility investigation. The samples underwent manual and computer-assisted assessment of concentration, motility and morphology. A total of 184 samples were examined twice: manually, according to the 2010 WHO recommendations, and with CASA, using the program set-tings provided by the manufacturer. Additionally, 46 samples underwent two manual analyses and two computer-assisted analyses. The p-value of p CASA and manually. In the group of patients where all analyses with each method were performed twice on the same sample we found no significant differences between both assessments of the same probe, neither in the samples analyzed manually nor with CASA, although standard deviation was higher in the CASA group. Our results suggest that computer-assisted sperm analysis requires further improvement for a wider application in clinical practice.

  1. From manual gesture to speech: a gradual transition.

    Science.gov (United States)

    Gentilucci, Maurizio; Corballis, Michael C

    2006-01-01

    There are a number of reasons to suppose that language evolved from manual gestures. We review evidence that the transition from primarily manual to primarily vocal language was a gradual process, and is best understood if it is supposed that speech itself a gestural system rather than an acoustic system, an idea captured by the motor theory of speech perception and articulatory phonology. Studies of primate premotor cortex, and, in particular, of the so-called "mirror system" suggest a double hand/mouth command system that may have evolved initially in the context of ingestion, and later formed a platform for combined manual and vocal communication. In humans, speech is typically accompanied by manual gesture, speech production itself is influenced by executing or observing hand movements, and manual actions also play an important role in the development of speech, from the babbling stage onwards. The final stage at which speech became relatively autonomous may have occurred late in hominid evolution, perhaps with a mutation of the FOXP2 gene around 100,000 years ago.

  2. Nutrition Education, Manual for Teachers. Health Education, Physical Dimension of Health.

    Science.gov (United States)

    New York State Education Dept., Albany.

    This manual aims to provide teachers with nutrition information and guidance to facilitate nutrition learning experiences for chidren and youth. Parts one through four of the manual provide teachers of primary grades, intermediate grades, and junior and senior high school with an overview of nutrition education, the goals that teachers should…

  3. Manual In-Line Stabilization of the Cervical Spine Increases the ...

    African Journals Online (AJOL)

    A total of 100 patients were enrolled into the study and were allocated into 2 groups of either Manual In-Line ... Manual in-line stabilization (MILS) of the cervical spine is an integral part of airway management when dealing ... risk mechanism of injury such as falls, diving, high speed motor vehicle accidents and restriction of.

  4. 78 FR 60684 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2013-10-02

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission... in the Sole, Shared, and None columns in COLUMN 8 of the Information Table. Along with the adoption...

  5. 76 FR 1514 - Adoption of Updated EDGAR Filer Manual

    Science.gov (United States)

    2011-01-11

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION 17 CFR Part 232 Adoption of Updated EDGAR Filer Manual AGENCY: Securities and Exchange Commission... (Notice of stay of effective and compliance dates) for more information. Along with adoption of the Filer...

  6. Training Resource Manual on Arbitration in the Public Schools.

    Science.gov (United States)

    Tener, Barbara; And Others

    This publication is part of a three-volume series of manuals designed to serve both as instructional guides and as ready references to some of the more complex problems of public school collective bargaining. The series is intended for use primarily by school board members, educational administrators, and other individuals interested in collective…

  7. Internal Aspects of the Skill Transfer of Manual Assembly Work

    Science.gov (United States)

    Doyo, Daisuke

    2009-01-01

    In manual assembly work, parts are often assembled by applying force with a simple tool or by hand. A worker thus needs control the force he or she applies in working, as an appropriate level of force is requisite for minimizing work failures and improving efficiency. The object of this study is to clarify the relationship between the level of…

  8. MAN-004 Design Standards Manual

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Timothy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-07-01

    protection, mechanical, electrical, telecommunications, and security features is expected to ensure compatibility with planned functional equipment and to facilitate constructability. If portions of the design are subcontracted to specialists, delivery of the finished design documents must not be considered complete until the subcontracted portions are also submitted for review. You must, along with support consultants, perform functional analyses and programming in developing design solutions. These solutions must reflect coordination of the competing functional, budgetary, and physical requirements for the project. During design phases, meetings between you and the SNL/NM Project Team to discuss and resolve design issues are required. These meetings are a normal part of the design process. For specific design-review requirements, see the project-specific Design Criteria. In addition to the design requirements described in this manual, instructive information is provided to explain the sustainable building practice goals for design, construction, operation, and maintenance of SNL/NM facilities. Please notify SNL/NM personnel of design best practices not included in this manual, so they can be incorporated in future updates.

  9. Constructivist Grounded Theory?

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, PhD, Hon. PhD

    2012-06-01

    Full Text Available AbstractI refer to and use as scholarly inspiration Charmaz’s excellent article on constructivist grounded theory as a tool of getting to the fundamental issues on why grounded theory is not constructivist. I show that constructivist data, if it exists at all, is a very, very small part of the data that grounded theory uses.

  10. Microsoft Excel 2007 - Manual

    OpenAIRE

    Roque, Vítor

    2009-01-01

    O Microsoft Excel faz parte do "Office", um pacote de produtos que combinam vários tipos de software para criar documentos, folhas de cálculo, apresentações e para gerir correio electrónico. Nesta nova versão, o Microsoft Excel surge com uma nova interface, onde os tradicionais menus de opções desaparecem e dão lugar a um friso com diversos separadores onde podemos encontrar, mais facilmente, os comandos necessários à execução das tarefas que nos propomos realizar. O obje...

  11. Analytical transport network theory to guide the design of 3-D microstructural networks in energy materials: Part 1. Flow without reactions

    Science.gov (United States)

    Cocco, Alex P.; Nakajo, Arata; Chiu, Wilson K. S.

    2017-12-01

    We present a fully analytical, heuristic model - the "Analytical Transport Network Model" - for steady-state, diffusive, potential flow through a 3-D network. Employing a combination of graph theory, linear algebra, and geometry, the model explicitly relates a microstructural network's topology and the morphology of its channels to an effective material transport coefficient (a general term meant to encompass, e.g., conductivity or diffusion coefficient). The model's transport coefficient predictions agree well with those from electrochemical fin (ECF) theory and finite element analysis (FEA), but are computed 0.5-1.5 and 5-6 orders of magnitude faster, respectively. In addition, the theory explicitly relates a number of morphological and topological parameters directly to the transport coefficient, whereby the distributions that characterize the structure are readily available for further analysis. Furthermore, ATN's explicit development provides insight into the nature of the tortuosity factor and offers the potential to apply theory from network science and to consider the optimization of a network's effective resistance in a mathematically rigorous manner. The ATN model's speed and relative ease-of-use offer the potential to aid in accelerating the design (with respect to transport), and thus reducing the cost, of energy materials.

  12. Preserving Food by Drying. A Math/Science Teaching Manual. Appropriate Technologies for Development. Manual No. M-10.

    Science.gov (United States)

    Fahy, Cynthia; And Others

    This manual presents a design for teaching science principles and mathematics concepts through a sequence of activities concentrating on weather, solar food dryers, and nutrition. Part I focuses on the effect of solar energy on air and water, examining the concepts of evaporation, condensation, radiation, conduction, and convection. These concepts…

  13. In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part II: Nonlinear Theory and Extended Aerodynamics

    Science.gov (United States)

    Goldman, Benjamin D.; Dowell, Earl H.; Scott, Robert C.

    2015-01-01

    Conical shell theory and a supersonic potential flow aerodynamic theory are used to study the nonlinear pressure buckling and aeroelastic limit cycle behavior of the thermal protection system for NASA's Hypersonic Inflatable Aerodynamic Decelerator. The structural model of the thermal protection system consists of an orthotropic conical shell of the Donnell type, resting on several circumferential elastic supports. Classical Piston Theory is used initially for the aerodynamic pressure, but was found to be insufficient at low supersonic Mach numbers. Transform methods are applied to the convected wave equation for potential flow, and a time-dependent aerodynamic pressure correction factor is obtained. The Lagrangian of the shell system is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the governing differential-algebraic equations of motion. Aeroelastic limit cycle oscillations and buckling deformations are calculated in the time domain using a Runge-Kutta method in MATLAB. Three conical shell geometries were considered in the present analysis: a 3-meter diameter 70 deg. cone, a 3.7-meter 70 deg. cone, and a 6-meter diameter 70 deg. cone. The 6-meter configuration was loaded statically and the results were compared with an experimental load test of a 6-meter HIAD. Though agreement between theoretical and experimental strains was poor, the circumferential wrinkling phenomena observed during the experiments was captured by the theory and axial deformations were qualitatively similar in shape. With Piston Theory aerodynamics, the nonlinear flutter dynamic pressures of the 3-meter configuration were in agreement with the values calculated using linear theory, and the limit cycle amplitudes were generally on the order of the shell thickness. The effect of axial tension was studied for this configuration, and increasing tension was found to decrease the limit cycle amplitudes when the circumferential

  14. The Influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings - Part II: Comparison Between Theory and Experiment

    DEFF Research Database (Denmark)

    Heinrichson, Niels; Fuerst, Axel; Santos, Ilmar

    2007-01-01

    This is Part II of a two-part series of papers describing the effects of high-pressure injection pockets on the operating conditions of tilting-pad thrust bearings. The paper has two main objectives. One is an experimental investigation of the influence of an oil injection pocket on the pressure...

  15. Manual therapy in veterinary rehabilitation.

    Science.gov (United States)

    Hesbach, Amie Lamoreaux

    2014-03-01

    As it matures, the field of animal rehabilitation is welcoming utilization of interventions that have proven efficacy in the specialty of physical therapy for human patients. More recently, manual therapy techniques have become more accepted. Range-of-motion and stretching techniques; mobilization or manipulation of soft tissues, peripheral joints, and the spine; neuromuscular facilitation techniques; techniques unique to osteopathy; chest physical therapy; manual lymphatic drainage techniques; and neural mobilization techniques are now commonly incorporated in clinical practice, and these interventions are more commonly cited in the veterinary literature. The following is a brief review of these manual therapy approaches including the goals, effects, indications, precautions, and contraindications. Copyright © 2014 Elsevier Inc. All rights reserved.

  16. Past and future corollaries of theories on causes of metabolic syndrome and obesity related co-morbidities part 2: a composite unifying theory review of human-specific co-adaptations to brain energy consumption.

    Science.gov (United States)

    McGill, Anne-Thea

    2014-01-01

    Metabolic syndrome (MetS) predicts type II diabetes mellitus (TIIDM), cardiovascular disease (CVD) and cancer, and their rates have escalated over the last few decades. Obesity related co-morbidities also overlap the concept of the metabolic syndrome (MetS). However, understanding of the syndrome's underlying causes may have been misapprehended. The current paper follows on from a theory review by McGill, A-T in Archives of Public Health, 72: 30. This accompanying paper utilises research on human evolution and new biochemistry to theorise on why MetS and obesity arise and how they affect the population. The basis of this composite unifying theory is that the proportionately large, energy-demanding human brain may have driven co-adaptive mechanisms to provide, or conserve, energy for the brain. A 'dual system' is proposed. 1) The enlarged, complex cortico-limbic-striatal system increases dietary energy by developing strong neural self-reward/motivation pathways for the acquisition of energy dense food, and (2) the nuclear factor-erythroid 2-related factor 2 (NRF2) cellular protection system amplifies antioxidant, antitoxicant and repair activity by employing plant chemicals. In humans who consume a nutritious diet, the NRF2 system has become highly energy efficient. Other relevant human-specific co-adaptations are explored. In order to 'test' this composite unifying theory it is important to show that the hypothesis and sub-theories pertain throughout the whole of human evolution and history up till the current era. Corollaries of the composite unifying theory of MetS are examined with respect to past under-nutrition and malnutrition since agriculture began 10,000 years ago. The effects of man-made pollutants on degenerative change are examined. Projections are then made from current to future patterns on the state of 'insufficient micronutrient and/or unbalanced high energy malnutrition with central obesity and metabolic dysregulation' or 'malnubesity'. Forecasts

  17. Droid X The Missing Manual

    CERN Document Server

    Gralla, Preston

    2011-01-01

    Get the most from your Droid X right away with this entertaining Missing Manual. Veteran tech author Preston Gralla offers a guided tour of every feature, with lots of expert tips and tricks along the way. You'll learn how to use calling and texting features, take and share photos, enjoy streaming music and video, and much more. Packed with full-color illustrations, this engaging book covers everything from getting started to advanced features and troubleshooting. Unleash the power of Motorola's hot new device with Droid X: The Missing Manual. Get organized. Import your contacts and sync wit

  18. Motorola Xoom The Missing Manual

    CERN Document Server

    Gralla, Preston

    2011-01-01

    Motorola Xoom is the first tablet to rival the iPad, and no wonder with all of the great features packed into this device. But learning how to use everything can be tricky-and Xoom doesn't come with a printed guide. That's where this Missing Manual comes in. Gadget expert Preston Gralla helps you master your Xoom with step-by-step instructions and clear explanations. As with all Missing Manuals, this book offers refreshing, jargon-free prose and informative illustrations. Use your Xoom as an e-book reader, music player, camcorder, and phoneKeep in touch with email, video and text chat, and so

  19. Matematica 2. Manual do Professor (Mathematics 2. Teacher's Manual).

    Science.gov (United States)

    D'Alu, Maria Jose Miranda de Sousa

    This teacher's manual accompanies a mathematics textbook for second graders, written in Portuguese. Developed from objectives set forth by the National Portuguese Materials Development Center, it follows closely the objectives and methodology of major curricula used in schools of the United States. Consideration was given to the Portuguese child's…

  20. Children of Divorce: Facilitation of Development through School-Based Groups. Grades 4 and 5. A Replication Manual.

    Science.gov (United States)

    Kalter, Neil; And Others

    This manual outlines a time-limited group intervention for children in grades 4 and 5 who are experiencing parental divorce. Part A, "Overview and Program Organization" (Neil Kalter), includes an introduction to the manual, an overview of developmental facilitation groups, and a discussion on group organization. Part B presents guidelines and…

  1. Efficient assessment of exposure to manual lifting using company data.

    Science.gov (United States)

    van der Beek, Allard J; Mathiassen, Svend Erik; Burdorf, Alex

    2013-05-01

    The objective of this study, based on an extensive dataset on manual materials handling during scaffolding, was to explore whether routinely collected company data can be used to estimate exposure to manual lifting. The number of manual lifts of scaffold parts while constructing/dismantling scaffolds was well predicted by the number of scaffolders in the team and the type of worksite, in combination with company data of either the number of scaffold parts or the scaffold volume. The proportion of explained variance in the number of lifts ranged from 77% to 92%, depending on the variables in the model. Data on scaffold parts and scaffold volume can easily be obtained from the company's administration, since this is its usual paperwork supporting logistics and customer invoicing, respectively. We conclude that company data can be a promising source of information for ergonomic practitioners and researchers, to support assessment of manual lifting in scaffolding. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  2. CPLOAS_2 User Manual.

    Energy Technology Data Exchange (ETDEWEB)

    Sallaberry, Cedric Jean-Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Helton, Jon C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-05-01

    Weak link (WL)/strong link (SL) systems are important parts of the overall operational design of high - consequence systems. In such designs, the SL system is very robust and is intended to permit operation of the entire system under, and only under, intended conditions. In contrast, the WL system is intended to fail in a predictable and irreversible manner under accident conditions and render the entire system inoperable before an accidental operation of the SL system. The likelihood that the WL system will fail to d eactivate the entire system before the SL system fails (i.e., degrades into a configuration that could allow an accidental operation of the entire system) is referred to as probability of loss of assured safety (PLOAS). This report describes the Fortran 90 program CPLOAS_2 that implements the following representations for PLOAS for situations in which both link physical properties and link failure properties are time - dependent: (i) failure of all SLs before failure of any WL, (ii) failure of any SL before f ailure of any WL, (iii) failure of all SLs before failure of all WLs, and (iv) failure of any SL before failure of all WLs. The effects of aleatory uncertainty and epistemic uncertainty in the definition and numerical evaluation of PLOAS can be included in the calculations performed by CPLOAS_2. Keywords: Aleatory uncertainty, CPLOAS_2, Epistemic uncertainty, Probability of loss of assured safety, Strong link, Uncertainty analysis, Weak link

  3. Manual Torque Data Study

    Energy Technology Data Exchange (ETDEWEB)

    Mundt, Mark Osroe [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Martinez, Matthew Ronald [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Varela, Jeanette Judith [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Anderson-Cook, Christine Michaela [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gilmore, Walter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Williams, Allie [Pantex Plant (PTX), Amarillo, TX (United States)

    2018-01-11

    At the Pantex Plant in Amarillo, TX, Production Technicians (PTs) build and disassemble nuclear weapon systems. The weapons are held in an integrated work stand for stability and to increase the safety environment for the workers and for the materials being processed. There are many occasions in which a knob must be turned to tighten an assembly part. This can help to secure or manipulate pieces of the system. As there are so many knobs to turn, the instructions given to the PTs are to twist the knob to a hand-tight setting, without the aid of a torque wrench. There are inherent risks in this procedure as the knobs can be tightened too loosely such that the apparatus falls apart or too tightly such that the force can crush or pinch components in the system that contain energetic materials. We want to study these operations at Pantex. Our goal is to collect torque data to assess the safety and reliability of humantooling interfaces.

  4. CPLOAS_2 user manual

    Energy Technology Data Exchange (ETDEWEB)

    Sallaberry, Cedric Jean-Marie.; Helton, Jon Craig

    2012-10-01

    Weak link (WL)/strong link (SL) systems are important parts of the overall operational design of high-consequence systems. In such designs, the SL system is very robust and is intended to permit operation of the entire system under, and only under, intended conditions. In contrast, the WL system is intended to fail in a predictable and irreversible manner under accident conditions and render the entire system inoperable before an accidental operation of the SL system. The likelihood that the WL system will fail to deactivate the entire system before the SL system fails (i.e., degrades into a configuration that could allow an accidental operation of the entire system) is referred to as probability of loss of assured safety (PLOAS). This report describes the Fortran 90 program CPLOAS_2 that implements the following representations for PLOAS for situations in which both link physical properties and link failure properties are time-dependent: (i) failure of all SLs before failure of any WL, (ii) failure of any SL before failure of any WL, (iii) failure of all SLs before failure of all WLs, and (iv) failure of any SL before failure of all WLs. The effects of aleatory uncertainty and epistemic uncertainty in the definition and numerical evaluation of PLOAS can be included in the calculations performed by CPLOAS_2.

  5. The design process of a reading comprehension manual

    Directory of Open Access Journals (Sweden)

    Sergio Alonso Lopera Medina

    2015-05-01

    Full Text Available Material design is an important part in the teaching practices. This article describes the process of material design of a foreign language (FL reading manual for undergraduate students at Universidad de Antioquia (Medellín – Colombia. A case study was used as a research method. Four in-service English teachers based their inquiry following the reflective approach of professional development. They also took into account the guidelines to design teaching materials proposed by Howard and Major (2004.  Some of the results of their inquiry for the design of the manual involve contextualization, personalization, and students’ needs. A sample of a reading strategy is given in order to illustrate how teachers worked and designed the manual as a product of their inquiry. Conclusions suggest that this professional development practice helped teachers become more aware of their own teaching realities and also helped them to understand their beliefs and practice in teaching reading as a foreign language.

  6. Vascular profiling: should manual therapists take blood pressure?

    Science.gov (United States)

    Taylor, Alan J; Kerry, Roger

    2013-08-01

    Risk assessment of the cervical spine prior to manual therapy interventions is currently a contentious topic, highlighted by recent suggestions in the medical press (http://www.bmj.com/content/344/bmj.e3679), that manipulative therapy should be abandoned because of the perceived risk. This paper addresses the issue of manual therapists using blood pressure measurement as an aid to clinical reasoning and decision making. The authors' use a case series of three neuromusculoskeletal presentations, which support the contention that blood pressure recording can prove to be an appropriate objective test for assessment prior to manual therapy interventions. Furthermore, it is suggested that blood pressure testing may provide direction for risk assessment and/or the management of patients across all populations and age groups as part of a holistic 'vascular profiling' approach to clinical reasoning and decision making. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Manual de uniones atornilladas laterales

    OpenAIRE

    Ortiz Herrera, Jesús; Hernando García, José Ignacio; Cervera Bravo, Jaime

    2009-01-01

    El manual presenta de manera detallada y extensa los criterios y procedimientos de análisis, de comprobación y de puesta en obra de uniones atornilladas laterales, con inclusión de ejemplos y herramientas informáticas para su mejor comprensión y manejo.

  8. Street Law Mock Trial Manual.

    Science.gov (United States)

    McGuire, Patricia, Ed.; O'Brien, Edward L.; Arbetman, Lee; Mills, Vivian H.; Pannell, Andrew

    Designed to facilitate the expanded use of mock trials, this manual is divided into two principle sections--a teacher's guide and a student's guide. The teacher's guide contains specific advice to teachers on all aspects of preparing for a mock trial and seven specific lesson plans for a 2- to 3-week mock trial unit. Each lesson contains…

  9. Teacher Resource Manual for Civics.

    Science.gov (United States)

    Smith, Melinda R., Ed.

    The learning activities in this resource manual supplement three commonly taught units in the secondary civics curriculum: law, government, and consumer economics. The activities were chosen to meet objectives of the New Mexico Basic Skills Plan. Although geared toward ninth-grade-level students, the activities can generally be adapted for…

  10. PNNL Hoisting and Rigging Manual

    Energy Technology Data Exchange (ETDEWEB)

    Haynie, Todd O.; Fullmer, Michael W.

    2008-12-29

    This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

  11. Sludge Digestion Manual; Handboek Slibgisting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-09-15

    This manual offers a guideline for developing, designing, optimizing and operating sludge digestion installations based on sewage sludge. It also offers tools for solving operation problems [Dutch] Het Handboek is een leidraad voor het ontwikkelen, ontwerpen, optimaliseren en bedrijven van slibgistingsinstallaties voor zuiveringsslib. Ook geeft het handvatten voor het oplossen van operationele problemen.

  12. Two manuals of reindeer diseases

    Directory of Open Access Journals (Sweden)

    Sven Skjenneberg

    1981-05-01

    Full Text Available R. A. Dieterich, J. K. Morton, & S. L. Raich. "Reindeer Health Aide Manual". Institute of Arctic Biology and Cooperative Extension Service, University of Alaska. 157pp.R. A. Dieterich (ed.. Alaska Wildlife Diseases.Compendium.University of Alaska. 524pp.

  13. Manual tracking in three dimensions.

    NARCIS (Netherlands)

    Mrotek, L.A.; Gielen, C.C.A.M.; Flanders, M.

    2006-01-01

    Little is known about the manual tracking of targets that move in three dimensions. In the present study, human subjects followed, with the tip of a hand-held pen, a virtual target moving four times (period 5 s) around a novel, unseen path. Two basic types of target paths were used: a peanut-shaped

  14. PHOEBE - step by step manual

    Science.gov (United States)

    Zasche, P.

    2016-03-01

    An easy step-by-step manual of PHOEBE is presented. It should serve as a starting point for the first time users of PHOEBE analyzing the eclipsing binary light curve. It is demonstrated on one particular detached system also with the downloadable data and the whole procedure is described easily till the final trustworthy fit is being reached.

  15. Solar Heating Systems: Student Manual.

    Science.gov (United States)

    Green, Joanne; And Others

    This Student Manual for a Solar Heating System curriculum contains 22 units of instructional materials for students to use in a course or courses on solar heating systems (see note). For each unit (task), objectives, assignment sheets, laboratory assignments, information sheets, checkpoints (tests), and job sheets are provided. Materials are set…

  16. Mosquito and Blackfly Category Manual.

    Science.gov (United States)

    Bowman, James S.; And Others

    This manual provides information needed to meet the standards for pesticide applicator certification. Section one is concerned with the morphology, life cycle and breeding areas of mosquitoes and the diseases resulting from their presence. The second section covers similar categories in relation to the black fly population. Calculation methods and…

  17. Electrostatic Precipitator (ESP) TRAINING MANUAL

    Science.gov (United States)

    The manual assists engineers in using a computer program, the ESPVI 4.0W, that models all elements of an electrostatic precipitator (ESP). The program is a product of the Electric Power Research Institute and runs in the Windows environment. Once an ESP is accurately modeled, the...

  18. Library Binding Manual. Revised Edition.

    Science.gov (United States)

    Lakhanpal, S. K.

    This procedural manual is designed to be used in bindery sections in public, university and special libraries. It briefly discusses these general matters: administrative control; selection of a binder; when and what to bind; conventional binding; routines; missing issues; schedule for shipments; temporary binding; rare books, maps and newspapers;…

  19. Test Review: Shipley-2 Manual

    Science.gov (United States)

    Kaya, Fatih; Delen, Erhan; Bulut, Okan

    2012-01-01

    The authors review the "Shipley-2 Manual," a revised and restandardized version of the Shipley Institute of Living Scale, which is a brief yet robust measure of cognitive functioning and impairment. Like the previous version, the Shipley-2 assesses crystallized ability, which is gained through education and experience, and fluid…

  20. Adventure in Environment, Student Manual.

    Science.gov (United States)

    National Park Foundation, Washington, DC.

    To make students aware of their environment, this student study manual has been produced to accompany the National Environmental Education Development (NEED) program. It is a book about the world, the way it works and the way we get to know and understand it. Man is portrayed as a central figure, surrounded by his world, the environment, with…

  1. COE1 Calorimeter Operations Manual

    Energy Technology Data Exchange (ETDEWEB)

    Santi, Peter Angelo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-15

    The purpose of this manual is to describe the operations of the COE1 calorimeter which is used to measure the thermal power generated by the radioactive decay of plutonium-bearing materials for the purposes of assaying the amount of plutonium within the material.

  2. Basic Gas Chlorination Workshop Manual.

    Science.gov (United States)

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to introduce treatment plant operators to the safe operation and maintenance of gas chlorination systems employing the variable vacuum gas chlorinator. Each of the lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing…

  3. Attrition Cost Model Instruction Manual

    Science.gov (United States)

    Yanagiura, Takeshi

    2012-01-01

    This instruction manual explains in detail how to use the Attrition Cost Model program, which estimates the cost of student attrition for a state's higher education system. Programmed with SAS, this model allows users to instantly calculate the cost of attrition and the cumulative attrition rate that is based on the most recent retention and…

  4. Manual Therapy Practices of Sobadores in North Carolina.

    Science.gov (United States)

    Graham, Alan; Sandberg, Joanne C; Quandt, Sara A; Mora, Dana C; Arcury, Thomas A

    2016-10-01

    This analysis provides a description of the manual-therapy elements of sobadores practicing in North Carolina, using videotapes of patient treatment sessions. Three sobadores allowed the video recording of eight patient treatment sessions (one each for two sobadores, six for the third sobador). Each of the recordings was reviewed by an experienced chiropractor who recorded the frequencies of seven defined manual-therapy elements: (1) treatment time; (2) patient position on treatment surface; (3) patient body part contacted by the sobador; (4) sobador examination methods; (5) primary treatment processes; (6) sobador body part area referencing patient; and (7) adjunctive treatment processes. The range of treatment time of 9-30 min was similar to the treatment spectra that combine techniques used by conventional massage and manipulative practitioners. The patient positions on the treatment surface were not extraordinary, given the wide variety of treatment processes used, and indicated the sobadores treat patients in multiple positions. The patient body part contacted by the sobadores indicated that they were treating each of the major parts of the musculoskeletal system. Basic palpation dominated the sobadores' examination methods. The sobadores' primary treatment processes included significant variety, but rubbing was the dominant practice. The hands were the sobador body area that most often made contact with the patient. They all used lubricants. Sobadores' methods are similar to those of other manual-therapy practitioners. Additional study of video-recorded sobador practices is needed. Video-recorded practice of other traditional and conventional manual therapies for comparative analysis will help delineate the specific similarities and differences among the manual therapies.

  5. MAGNA (Materially and Geometrically Nonlinear Analysis). Part II. Preprocessor Manual.

    Science.gov (United States)

    1982-12-01

    AM SHELL - DEFINES E ENTS AS SHELL OR 3-U SIFT ELIMINATES UNUSED MODE Il1E0 STOP - PIUS PRO OPERATION TRASLATE - TRANSLATES MODEL POSITION IN 3-SPACE...LIST ALL PAAMTER VALUES TIM PRINT CPU TIME SINCE START OF SESSION TRASLATE TRANSLATE MODEL FRO ORIGIN VERTICAL VERTICAL AXIS ZOOM ZOOM ON THE1 NODEL

  6. Problem Manual for Power Processing, Part 1. Electric Machinery Analysis.

    Science.gov (United States)

    Hamilton, Howard B.

    This publication was developed as a portion of a two-semester sequence commencing at either the sixth or seventh term of the undergraduate program in electrical engineering at the University of Pittsburgh. The materials of the two courses, produced by a National Science Foundation grant, are concerned with power conversion systems comprising power…

  7. MAGIC Computer Simulation. Volume 2: Analyst Manual, Part 1

    Science.gov (United States)

    1971-05-01

    tiC l•)tC,l(~I•J•lt61 CALL ALBERTIF’~•LeOTtNOQ•LS l ) ()nTO 360 are used to write out the pertinent program da t a and the information on t he card... MATEA I &L 1o•SKIAT zo•aAMOA l O•TaAG[T C • 1eZ•9tl l •l9 •21•29 to oooe t91•99 • INTEAlOA ~OLUHE C 1 • EXTERIOR VOLUME c are used to test the space...c_ en c The statements AIN ’OR TH[ QUAOA& TIC SUA,AC[ AlN•Al L.Al•3 GOTO lZO are used to assign RIN a value and to assign the surface number

  8. Air Pollution Manual, Part 1--Evaluation. Second Edition.

    Science.gov (United States)

    Giever, Paul M., Ed.

    Due to the great increase in technical knowledge and improvement in procedures, this second edition has been prepared to update existing information. Air pollution legislation is reviewed. Sources of air pollution are examined extensively. They are treated in terms of natural sources, man-made sources, metropolitan regional emissions, emission…

  9. Clean Air Markets - Part 75 Emissions Monitoring Policy Manual

    Science.gov (United States)

    Learn about monitoring mass sulfur dioxide and mass carbon dioxide emissions, nitrogen oxide emission rate, and heat input by units affected by the Acid Rain Program and the Clean Air Interstate Rule.

  10. The 'Goldilocks Zone': getting the measure of manual asymmetries.

    Directory of Open Access Journals (Sweden)

    Rachael K Raw

    Full Text Available Some studies have shown that manual asymmetries decrease in older age. These results have often been explained with reference to models of reduced hemispheric specialisation. An alternative explanation, however, is that hand differences are subtle, and capturing them requires tasks that yield optimal performance with both hands. Whereas the hemispheric specialisation account implies that reduced manual asymmetries should be reliably observed in older adults, the 'measurement difficulty' account suggests that manual asymmetries will be hard to detect unless a task has just the right level of difficulty--i.e. within the 'Goldilocks Zone', where it is not too easy or too hard, but just right. Experiment One tested this hypothesis and found that manual asymmetries were only detected when participants performed in this zone; specifically, performance on a tracing task was only superior in the preferred hand when task constraints were high (i.e. fast speed tracing. Experiment Two used three different tasks to examine age differences in manual asymmetries; one task produced no asymmetries, whilst two tasks revealed asymmetries in both younger and older groups (with poorer overall performance in the old group across all tasks. Experiment Three revealed task-dependent asymmetries in both age groups, but highlighted further detection difficulties linked with the metric of performance and compensatory strategies used by participants. Results are discussed with reference to structural learning theory, whereby we suggest that the processes of inter-manual transfer lead to relatively small performance differences between the hands (despite a strong phenomenological sense of performance disparities.

  11. BISON Theory Manual The Equations behind Nuclear Fuel Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hales, J. D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Williamson, R. L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Novascone, S. R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Pastore, G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Spencer, B. W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Stafford, D. S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gamble, K. A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Perez, D. M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Liu, W. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    BISON is a finite element-based nuclear fuel performance code applicable to a variety of fuel forms including light water reactor fuel rods, TRISO particle fuel, and metallic rod and plate fuel. It solves the fully-coupled equations of thermomechanics and species diffusion, for either 2D axisymmetric or 3D geometries. Fuel models are included to describe temperature and burnup dependent thermal properties, fission product swelling, densification, thermal and irradiation creep, fracture, and fission gas production and release. Plasticity, irradiation growth, and thermal and irradiation creep models are implemented for clad materials. Models are also available to simulate gap heat transfer, mechanical contact, and the evolution of the gap/plenum pressure with plenum volume, gas temperature, and fission gas addition. BISON is based on the MOOSE framework and can therefore efficiently solve problems using standard workstations or very large high-performance computers. This document describes the theoretical and numerical foundations of BISON.

  12. SIERRA/Aero Theory Manual Version 4.44

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-04-01

    SIERRA/Aero is a two and three dimensional, node-centered, edge-based finite volume code that approximates the compressible Navier-Stokes equations on unstructured meshes. It is applicable to inviscid and high Reynolds number laminar and turbulent flows. Currently, two classes of turbulence models are provided: Reynolds Averaged Navier-Stokes (RANS) and hybrid methods such as Detached Eddy Simulation (DES). Large Eddy Simulation (LES) models are currently under development. The gas may be modeled either as ideal, or as a non-equilibrium, chemically reacting mixture of ideal gases. This document describes the mathematical models contained in the code, as well as certain implementation details. First, the governing equations are presented, followed by a description of the spatial discretization. Next, the time discretization is described, and finally the boundary conditions. Throughout the document, SIERRA/ Aero is referred to simply as Aero for brevity.

  13. SIERRA/Aero Theory Manual Version 4.46.

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-09-01

    SIERRA/Aero is a two and three dimensional, node-centered, edge-based finite volume code that approximates the compressible Navier-Stokes equations on unstructured meshes. It is applicable to inviscid and high Reynolds number laminar and turbulent flows. Currently, two classes of turbulence models are provided: Reynolds Averaged Navier-Stokes (RANS) and hybrid methods such as Detached Eddy Simulation (DES). Large Eddy Simulation (LES) models are currently under development. The gas may be modeled either as ideal, or as a non-equilibrium, chemically reacting mixture of ideal gases. This document describes the mathematical models contained in the code, as well as certain implementation details. First, the governing equations are presented, followed by a description of the spatial discretization. Next, the time discretization is described, and finally the boundary conditions. Throughout the document, SIERRA/ Aero is referred to simply as Aero for brevity.

  14. Inverse modelling of Köhler theoryPart 1: A response surface analysis of CCN spectra with respect to surface-active organic species

    Directory of Open Access Journals (Sweden)

    S. Lowe

    2016-09-01

    Full Text Available In this study a novel framework for inverse modelling of cloud condensation nuclei (CCN spectra is developed using Köhler theory. The framework is established by using model-generated synthetic measurements as calibration data for a parametric sensitivity analysis. Assessment of the relative importance of aerosol physicochemical parameters, while accounting for bulk–surface partitioning of surface-active organic species, is carried out over a range of atmospherically relevant supersaturations. By introducing an objective function that provides a scalar metric for diagnosing the deviation of modelled CCN concentrations from synthetic observations, objective function response surfaces are presented as a function of model input parameters. Crucially, for the chosen calibration data, aerosol–CCN spectrum closure is confirmed as a well-posed inverse modelling exercise for a subset of the parameters explored herein. The response surface analysis indicates that the appointment of appropriate calibration data is particularly important. To perform an inverse aerosol–CCN closure analysis and constrain parametric uncertainties, it is shown that a high-resolution CCN spectrum definition of the calibration data is required where single-valued definitions may be expected to fail. Using Köhler theory to model CCN concentrations requires knowledge of many physicochemical parameters, some of which are difficult to measure in situ on the scale of interest and introduce a considerable amount of parametric uncertainty to model predictions. For all partitioning schemes and environments modelled, model output showed significant sensitivity to perturbations in aerosol log-normal parameters describing the accumulation mode, surface tension, organic : inorganic mass ratio, insoluble fraction, and solution ideality. Many response surfaces pertaining to these parameters contain well-defined minima and are therefore good candidates for calibration using a Monte

  15. Sustainability of Hydrogen Supply Chain. Part II: Prioritizing and Classifying the Sustainability of Hydrogen Supply Chains based on the Combination of Extension Theory and AHP

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Manzardo, Alessandro; Toniolo, Sara

    2013-01-01

    The purpose of this study is to develop a method for prioritizing and classifying the sustainability of hydrogen supply chains and assist decision-making for the stakeholders/decision-makers. Multiple criteria for sustainability assessment of hydrogen supply chains are considered and multiple...... decision-makers are allowed to participate in the decision-making using linguistic terms. In this study, extension theory and analytic hierarchy process are combined to rate the sustainability of hydrogen supply chains. The sustainability of hydrogen supply chains could be identified according...

  16. A novel method for investigating the repulsive and attractive parts of cubic equations of state and the combining rules used with the vdW-1f theory

    DEFF Research Database (Denmark)

    Kontogeorgis, Georgios; Philippos, Coutsikos; Vassilis, Harismiadis

    1998-01-01

    A novel method for investigating the performance of the repulsive and attractive terms of a cubic equation of state (EoS) along with different combining rules for the cross covolume (b(12)) and cross-energy (a(12)) parameters used with the van der Waals one-fluid theory is presented. The method......(c-fv) values with the experimental ones suggest that the van der Waals (vdW) repulsive term is applicable not only to mixtures with spherical molecules, as originally suggested by van der Waals, but also to very asymmetric ones. On the other hand, the attractive term leads to gamma(res) values that can...

  17. Review of Psychodynamic diagnostics manual (PDM).

    Science.gov (United States)

    Moses, Ira

    2008-03-01

    Reviews the book, Psychodynamic diagnostics manual (PDM) by Alliance of Psychoanalytic Organizations (2006). This volume is divided into three major sections, Part 1--Classification of Adult Mental Heath Disorder, Part 2--Classification of Child and Adolescent Mental Health Disorder, and Part 3--Conceptual and Research Foundations for a Psychodynamically Based Classification System for Mental Health Disorders. Unlike the standard DSM which highlights the patient's presenting symptom (Axis I) with secondary consideration given to an underlying personality disorder (Axis II), the major thesis of classification scheme of this volume is that diagnostic evaluation should provide a more patient centered and a more clinically useful picture of the individual by understanding the symptom(s) through the essential dimensions of the patient's personality and mental functions (interpersonal and cognitive capacities). Part 3, which could stand on its own as a separate volume, is a thorough critique of psychotherapy outcome research in which the authors delineate how major design flaws have derived from "favoring what is measurable over what is meaningful." The authors cogently demonstrate that diagnostic assessment is a continuous effort toward providing individualized and clinically relevant evaluations. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

  18. State of laboratory manual instruction in California community college introductory (non-majors) biology laboratory instruction

    Science.gov (United States)

    Priest, Michelle

    utilize the current faculty research expertise and knowledge. Unfortunately, laboratory manual authors had no real learning framework in the development of the manual. Based on the LAI, most manuals focused on the lowest levels of inquiry based instruction. Most manuals focused exercises on cell and molecular topics. The manuals had little student exploration, creation or design in the laboratory exercise and no option for repeating the exercise. There was a clear desire of faculty and authors to improve the laboratory experience and manual. Authors and faculty wished to include more inquiry and utilize the best of Student Learning Outcome (SLO) methodologies. Authors and the laboratory manuals have a major disconnect in that authors have clear desires inquiry based learning for the manual but do not effectively implement the inquiry based learning for various reasons. The manuals themselves, laboratory manuals themselves are not robust inquiry based learning models to maximize student learning. Authors and faculty are disconnected in that authors know what they want their manuals to do...but do not effectively communicate that to faculty. Finally, schools are in a "wait and see" approach as to when to integrate the latest learning theory mandated by the Chancellors Office -- Student Learning Outcomes.

  19. Using Educational Neuroscience and Psychology to Teach Science. Part 1: A Case Study Review of Cognitive Load Theory (CLT) and Cognitive Acceleration through Science Education (CASE)

    Science.gov (United States)

    Jenkins, Rebecca Torrance

    2017-01-01

    This article is the first of a two-part series that explores science teachers' and their pupils' experiences of using different pedagogical approaches based on understandings of how brains learn. For this case-study research, nine science teachers were interviewed and four teachers self-selected to trial a pedagogical approach, new to them, from…

  20. Radiology Aide. Instructor Key [and] Student Manual.

    Science.gov (United States)

    Hartwein, Jon; Dunham, John

    This manual can be used independently by students in secondary health occupations programs or by persons receiving on-the-job training in a radiology department. The manual includes an instructor's key that provides answers to the activity sheets and unit evaluations. The manual consists of the following five units: (1) orientation to radiology;…

  1. Pre-Retirement Peer Counselling Training Manual.

    Science.gov (United States)

    Zinger, David J.

    This manual was developed to facilitate the initial training of a group of pre-retirement peer counselors and to introduce them to the basics of helping for clients facing pre-retirement issues. An introduction explains the use of the manual and urges users to complete suggested exercises when reading the manual. The next section lists learning…

  2. KDYNA user's manual

    Energy Technology Data Exchange (ETDEWEB)

    Levatin, J.A.L.; Attia, A.V.; Hallquist, J.O.

    1990-09-28

    This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

  3. Waltz's Theory of Theory

    DEFF Research Database (Denmark)

    Wæver, Ole

    2009-01-01

    Kenneth N. Waltz's 1979 book, Theory of International Politics, is the most influential in the history of the discipline. It worked its effects to a large extent through raising the bar for what counted as theoretical work, in effect reshaping not only realism but rivals like liberalism and refle......Kenneth N. Waltz's 1979 book, Theory of International Politics, is the most influential in the history of the discipline. It worked its effects to a large extent through raising the bar for what counted as theoretical work, in effect reshaping not only realism but rivals like liberalism...... and reflectivism. Yet, ironically, there has been little attention to Waltz's very explicit and original arguments about the nature of theory. This article explores and explicates Waltz's theory of theory. Central attention is paid to his definition of theory as ‘a picture, mentally formed' and to the radical anti......-empiricism and anti-positivism of his position. Followers and critics alike have treated Waltzian neorealism as if it was at bottom a formal proposition about cause-effect relations. The extreme case of Waltz being so victorious in the discipline, and yet being consistently mis-interpreted on the question of theory...

  4. Internal dosimetry technical basis manual

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  5. Predicting who will major in a science discipline: Expectancy-value theory as part of an ecological model for studying academic communities

    Science.gov (United States)

    Sullins, Ellen S.; Hernandez, Delia; Fuller, Carol; Shiro Tashiro, Jay

    Research on factors that shape recruitment and retention in undergraduate science majors currently is highly fragmented and in need of an integrative research framework. Such a framework should incorporate analyses of the various levels of organization that characterize academic communities (i.e., the broad institutional level, the departmental level, and the student level), and should also provide ways to study the interactions occurring within and between these structural levels. We propose that academic communities are analogous to ecosystems, and that the research paradigms of modern community ecology can provide the necessary framework, as well as new and innovative approaches to a very complex area. This article also presents the results of a pilot study that demonstrates the promise of this approach at the student level. We administered a questionnaire based on expectancy-value theory to undergraduates enrolled in introductory biology courses. Itself an integrative approach, expectancy-value theory views achievement-related behavior as a joint function of the person's expectancy of success in the behavior and the subjective value placed on such success. Our results indicated: (a) significant gender differences in the underlying factor structures of expectations and values related to the discipline of biology, (b) expectancy-value factors significantly distinguished biology majors from nonmajors, and (c) expectancy-value factors significantly predicted students' intent to enroll in future biology courses. We explore the expectancy-value framework as an operationally integrative framework in our ecological model for studying academic communities, especially in the context of assessing the underrepresentation of women and minorities in the sciences. Future research directions as well as practical implications are also discussed.

  6. Practical theories

    DEFF Research Database (Denmark)

    Jensen, Klaus Bruhn

    2016-01-01

    This article revisits the place of normative and other practical issues in the wider conceptual architecture of communication theory, building on the tradition of philosophical pragmatism. The article first characterizes everyday concepts of communication as the accumulated outcome of natural...... evolution and history: practical resources for human existence and social coexistence. Such practical concepts have served as the point of departure for diverse theoretical conceptions of what communication is. The second part of the article highlights the past neglect and current potential of normative...

  7. Between hermeneutics and datascapes: a critical appreciation of emergent landscape design theory and praxis through the writings of James Corner 1990-2000(Part Two

    Directory of Open Access Journals (Sweden)

    Richard Weller

    2001-03-01

    Full Text Available This, the second of a two part essay, continues to trace the theoretical work of James Corner over the period 1999-2000. Following Corner's lead, this second half of the essay summarises and comments upon some emerging design methods and specific design projects so as to situate the issues raised in part one. Part two begins with the unbuilt Pare de la Villette of 1982 by Rem Koolhaas and discusses its ramifications. The essay revolves around arguments put forward by Corner in the late 1990s for the agency of landscape design as structuring development rather than symbolising culture and nature, arguments for what landscape design does not what it means. To facilitate this, the writings of Bart Lootsma and Alex Wall who, along with Corner, presented the most pertinent and provocative themes in Corner's latest book Recovering Landscape: Essays in Contemporary Landscape Architecture, are considered in some detail. Part two concludes with thoughts on datascaping - a new design methodology synonymous with current trends in Dutch urbanism and one that impresses Corner with its capacity to manage and manipulate complex design programmes. Taken as a whole, the essay offers neither a set of findings nor feigns conclusion rather, it goes to the co-ordinates Corner has set out and explores the field they demarcate. The essay does, however, seek to qualify the claim that James Corner is articulating a middle ground between the deleteriously exclusive categories of landscape planning and landscape design and that this middle ground is crucial for landscape architecture's future as a 'synthetic and strategic art form'.

  8. Diode, transistor & fet circuits manual

    CERN Document Server

    Marston, R M

    2013-01-01

    Diode, Transistor and FET Circuits Manual is a handbook of circuits based on discrete semiconductor components such as diodes, transistors, and FETS. The book also includes diagrams and practical circuits. The book describes basic and special diode characteristics, heat wave-rectifier circuits, transformers, filter capacitors, and rectifier ratings. The text also presents practical applications of associated devices, for example, zeners, varicaps, photodiodes, or LEDs, as well as it describes bipolar transistor characteristics. The transistor can be used in three basic amplifier configuration

  9. Surface Environmental Surveillance Procedures Manual

    Energy Technology Data Exchange (ETDEWEB)

    RW Hanf; TM Poston

    2000-09-20

    Environmental surveillance data are used in assessing the impact of current and past site operations on human health and the environment, demonstrating compliance with applicable local, state, and federal environmental regulations, and verifying the adequacy of containment and effluent controls. SESP sampling schedules are reviewed, revised, and published each calendar year in the Hanford Site Environmental Surveillance Master Sampling Schedule. Environmental samples are collected by SESP staff in accordance with the approved sample collection procedures documented in this manual.

  10. ISE System Development Methodology Manual

    Energy Technology Data Exchange (ETDEWEB)

    Hayhoe, G.F.

    1992-02-17

    The Information Systems Engineering (ISE) System Development Methodology Manual (SDM) is a framework of life cycle management guidelines that provide ISE personnel with direction, organization, consistency, and improved communication when developing and maintaining systems. These guide-lines were designed to allow ISE to build and deliver Total Quality products, and to meet the goals and requirements of the US Department of Energy (DOE), Westinghouse Savannah River Company, and Westinghouse Electric Corporation.

  11. Defense Reutilization and Marketing Manual

    Science.gov (United States)

    1990-03-01

    by the tainer; such as 55-gallon metal drum. EPA Regional Administrator, or have had the 3. NSN or LSN/FSC and noun liner removed must have all bungs ... bungs ) to seal the con- materiel and procedures contained in this tainers upon receipt. manual for excess/surplus material shall (5) Markings/labels on...Madison Park High School, Boston, MA 02119 HS F Mario Umana Harbor School of Science & Technology, Boston, MA 02128 SMA N Massachusetts Maritime

  12. Lidar User’s Manual

    OpenAIRE

    Peterson, Lance William

    2011-01-01

    This is intended to be a user’s manual for the upgraded USU Rayleigh lidar. As such, it begins with a discussion of the purpose of a lidar. This is followed by a brief explanation of the fundamentals of Rayleigh scatter lidar. Next the reasons for and benefits of upgrading the lidar are discussed and as well as how the upgrade was accomplished. After establishing this basis, instructions are provided for operating the lidar, performing basic maintenance, and aligning various components.

  13. A survey of hidden-variables theories

    CERN Document Server

    Belinfante, F J

    1973-01-01

    A Survey of Hidden-Variables Theories is a three-part book on the hidden-variable theories, referred in this book as """"theories of the first kind"""". Part I reviews the motives in developing different types of hidden-variables theories. The quest for determinism led to theories of the first kind; the quest for theories that look like causal theories when applied to spatially separated systems that interacted in the past led to theories of the second kind. Parts II and III further describe the theories of the first kind and second kind, respectively. This book is written to make the literat

  14. TA-55 change control manual

    Energy Technology Data Exchange (ETDEWEB)

    Blum, T.W.; Selvage, R.D.; Courtney, K.H.

    1997-11-01

    This manual is the guide for initiating change at the Plutonium Facility, which handles the processing of plutonium as well as research on plutonium metallurgy. It describes the change and work control processes employed at TA-55 to ensure that all proposed changes are properly identified, reviewed, approved, implemented, tested, and documented so that operations are maintained within the approved safety envelope. All Laboratory groups, their contractors, and subcontractors doing work at TA-55 follow requirements set forth herein. This manual applies to all new and modified processes and experiments inside the TA-55 Plutonium Facility; general plant project (GPP) and line item funded construction projects at TA-55; temporary and permanent changes that directly or indirectly affect structures, systems, or components (SSCs) as described in the safety analysis, including Facility Control System (FCS) software; and major modifications to procedures. This manual does not apply to maintenance performed on process equipment or facility SSCs or the replacement of SSCs or equipment with documented approved equivalents.

  15. Revision of IAU Style Manual

    Science.gov (United States)

    Wilkins, G. A.

    The 1989 edition of the "IAU Style Manual" is in need of revision to reflect the changes in practice that have taken place since its preparation. These changes include the use of desk-top systems for the production of high-quality copy, the electronic transmission of text with embedded typesetting codes and the electronic publication of papers and reports, which may contain numerical data and images. The Manual should give advice and recommendations about the new procedures and typographical formats, but it is more important than ever that it should give clear and appropriate recommendations on matters that affect the quality of the content of all astronomical publications. The Manual should provide especially for the needs of astronomers who do not have English as their first language and it should include advice to them on the oral presentation of their papers. The editor. G. A. Wilkins, would be pleased to have the assistance of astronomers and others who are concerned with the quality of astronomical publications and who would be willing to participate in any aspect of the revision.

  16. THERM 5 / WINDOW 5 NFRC simulation manual

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Robin; Kohler, Christian; Arasteh, Dariush; Carmody, John; Huizenga, Charlie; Curcija, Dragan

    2003-06-01

    This document, the ''THERM 5/WINDOW 5 NFRC Simulation Manual', discusses how to use the THERM and WINDOW programs to model products for NFRC certified simulations and assumes that the user is already familiar with those programs. In order to learn how to use these programs, it is necessary to become familiar with the material in both the ''THERM User's Manual'' and the ''WINDOW User's Manual''. In general, this manual references the User's Manuals rather than repeating the information. If there is a conflict between either of the User Manual and this ''THERM 5/''WINDOW 5 NFRC Simulation Manual'', the ''THERM 5/WINDOW 5 NFRC Simulation Manual'' takes precedence. In addition, if this manual is in conflict with any NFRC standards, the standards take precedence. For example, if samples in this manual do not follow the current taping and testing NFRC standards, the standards not the samples in this manual, take precedence.

  17. Comparison between effectiveness of Mechanical and Manual Traction combined with mobilization and exercise therapy in Patients with Cervical Radiculopathy

    OpenAIRE

    Bukhari, Syed Rehan Iftikhar; Shakil-ur-Rehman, Syed; Ahmad, Shakeel; Naeem, Aamer

    2016-01-01

    Background and Objective: Cervical radiculopathy is a common neuro-musculo-skeletal disorder causing pain and disability. Traction is part of the evidence based manual physical therapy management due to its mechanical nature, type of traction and parameters related to its applicability and are still to be explored more through research. Our objective was to determine the Effects of Mechanical versus Manual Traction in Manual Physical Therapy combined with segmental mobilization and exercise t...

  18. Linear algebra and group theory

    CERN Document Server

    Smirnov, VI

    2011-01-01

    This accessible text by a Soviet mathematician features material not otherwise available to English-language readers. Its three-part treatment covers determinants and systems of equations, matrix theory, and group theory. 1961 edition.

  19. Pierre Robin sequence: Subdivision, data, theories, and treatment - Part 4: Recommended management and treatment of Pierre Robin sequence and its application.

    Science.gov (United States)

    Bütow, Kurt-W; Naidoo, Sharan; Zwahlen, Roger Arthur; Morkel, Jean A

    2016-01-01

    The disorder currently accepted as Pierre Robin syndrome/anomaly/sequence (PRS) has been plagued by controversy ever since initially being described. Controversy exists not only about the appropriate terminology and etiopathogenesis of the disorder but also about its management. Therefore, clinical findings and treatment outcomes of a large database of 266 PRS cases were compared with the current state of knowledge in the scientific literature related to history, clinical description, diagnostic criteria, epidemiology, theories of oligohydramnios, mandibular catch-up growth, midfacial hyperplasia, and early management. To provide a systematic treatment protocol for Fairbairn-Robin triad (FRT) and Siebold Robin sequence (SRS) patients based on clinical findings and experience with 266 PRS cases. A plethora of treatment modalities and their outcome in literature have been compared to those applied in this database and their outcomes. The management of SRS/FRT depends on various factors including compromised airways, feeding difficulties, as well as the sequence of the reconstructive ladder. Based on the novel PRS subdivisions, a stepwise sequential treatment approach is outlined, addressing the particular needs of each disorder systematically.

  20. LSENS: A General Chemical Kinetics and Sensitivity Analysis Code for homogeneous gas-phase reactions. Part 1: Theory and numerical solution procedures

    Science.gov (United States)

    Radhakrishnan, Krishnan

    1994-01-01

    LSENS, the Lewis General Chemical Kinetics and Sensitivity Analysis Code, has been developed for solving complex, homogeneous, gas-phase chemical kinetics problems and contains sensitivity analysis for a variety of problems, including nonisothermal situations. This report is part 1 of a series of three reference publications that describe LENS, provide a detailed guide to its usage, and present many example problems. Part 1 derives the governing equations and describes the numerical solution procedures for the types of problems that can be solved. The accuracy and efficiency of LSENS are examined by means of various test problems, and comparisons with other methods and codes are presented. LSENS is a flexible, convenient, accurate, and efficient solver for chemical reaction problems such as static system; steady, one-dimensional, inviscid flow; reaction behind incident shock wave, including boundary layer correction; and perfectly stirred (highly backmixed) reactor. In addition, the chemical equilibrium state can be computed for the following assigned states: temperature and pressure, enthalpy and pressure, temperature and volume, and internal energy and volume. For static problems the code computes the sensitivity coefficients of the dependent variables and their temporal derivatives with respect to the initial values of the dependent variables and/or the three rate coefficient parameters of the chemical reactions.

  1. RACLETTE: a model for evaluating the thermal response of plasma facing components to slow high power plasma transients. Part I: Theory and description of model capabilities

    Science.gov (United States)

    Raffray, A. René; Federici, Gianfranco

    1997-04-01

    RACLETTE (Rate Analysis Code for pLasma Energy Transfer Transient Evaluation), a comprehensive but relatively simple and versatile model, was developed to help in the design analysis of plasma facing components (PFCs) under 'slow' high power transients, such as those associated with plasma vertical displacement events. The model includes all the key surface heat transfer processes such as evaporation, melting, and radiation, and their interaction with the PFC block thermal response and the coolant behaviour. This paper represents part I of two sister and complementary papers. It covers the model description, calibration and validation, and presents a number of parametric analyses shedding light on and identifying trends in the PFC armour block response to high plasma energy deposition transients. Parameters investigated include the plasma energy density and deposition time, the armour thickness and the presence of vapour shielding effects. Part II of the paper focuses on specific design analyses of ITER plasma facing components (divertor, limiter, primary first wall and baffle), including improvements in the thermal-hydraulic modeling required for better understanding the consequences of high energy deposition transients in particular for the ITER limiter case.

  2. 17 CFR 232.10 - Application of part 232.

    Science.gov (United States)

    2010-04-01

    ... within two business days before or after the electronic Form ID filing, a notarized document, manually...-T-GENERAL RULES AND REGULATIONS FOR ELECTRONIC FILINGS General § 232.10 Application of part 232. (a) This part, in conjunction with the EDGAR Filer Manual and the electronic filing provisions of...

  3. Group theory for chemists fundamental theory and applications

    CERN Document Server

    Molloy, K C

    2010-01-01

    The basics of group theory and its applications to themes such as the analysis of vibrational spectra and molecular orbital theory are essential knowledge for the undergraduate student of inorganic chemistry. The second edition of Group Theory for Chemists uses diagrams and problem-solving to help students test and improve their understanding, including a new section on the application of group theory to electronic spectroscopy.Part one covers the essentials of symmetry and group theory, including symmetry, point groups and representations. Part two deals with the application of group theory t

  4. Computationally efficient analysis of particle transport and deposition in a human whole-lung-airway model. Part I: Theory and model validation.

    Science.gov (United States)

    Kolanjiyil, Arun V; Kleinstreuer, Clement

    2016-12-01

    Computational predictions of aerosol transport and deposition in the human respiratory tract can assist in evaluating detrimental or therapeutic health effects when inhaling toxic particles or administering drugs. However, the sheer complexity of the human lung, featuring a total of 16 million tubular airways, prohibits detailed computer simulations of the fluid-particle dynamics for the entire respiratory system. Thus, in order to obtain useful and efficient particle deposition results, an alternative modeling approach is necessary where the whole-lung geometry is approximated and physiological boundary conditions are implemented to simulate breathing. In Part I, the present new whole-lung-airway model (WLAM) represents the actual lung geometry via a basic 3-D mouth-to-trachea configuration while all subsequent airways are lumped together, i.e., reduced to an exponentially expanding 1-D conduit. The diameter for each generation of the 1-D extension can be obtained on a subject-specific basis from the calculated total volume which represents each generation of the individual. The alveolar volume was added based on the approximate number of alveoli per generation. A wall-displacement boundary condition was applied at the bottom surface of the first-generation WLAM, so that any breathing pattern due to the negative alveolar pressure can be reproduced. Specifically, different inhalation/exhalation scenarios (rest, exercise, etc.) were implemented by controlling the wall/mesh displacements to simulate realistic breathing cycles in the WLAM. Total and regional particle deposition results agree with experimental lung deposition results. The outcomes provide critical insight to and quantitative results of aerosol deposition in human whole-lung airways with modest computational resources. Hence, the WLAM can be used in analyzing human exposure to toxic particulate matter or it can assist in estimating pharmacological effects of administered drug-aerosols. As a practical

  5. Ockham's razors a user's manual

    CERN Document Server

    Sober, Elliott

    2015-01-01

    Ockham's razor, the principle of parsimony, states that simpler theories are better than theories that are more complex. It has a history dating back to Aristotle and it plays an important role in current physics, biology, and psychology. The razor also gets used outside of science – in everyday life and in philosophy. This book evaluates the principle and discusses its many applications. Fascinating examples from different domains provide a rich basis for contemplating the principle's promises and perils. It is obvious that simpler theories are beautiful and easy to understand; the hard problem is to figure out why the simplicity of a theory should be relevant to saying what the world is like. In this book, the ABCs of probability theory are succinctly developed and put to work to describe two 'parsimony paradigms' within which this problem can be solved.

  6. Systems thinking applied to safety during manual handling tasks in the transport and storage industry.

    Science.gov (United States)

    Goode, Natassia; Salmon, Paul M; Lenné, Michael G; Hillard, Peter

    2014-07-01

    Injuries resulting from manual handling tasks represent an on-going problem for the transport and storage industry. This article describes an application of a systems theory-based approach, Rasmussen's (1997. Safety Science 27, 183), risk management framework, to the analysis of the factors influencing safety during manual handling activities in a freight handling organisation. Observations of manual handling activities, cognitive decision method interviews with workers (n=27) and interviews with managers (n=35) were used to gather information about three manual handling activities. Hierarchical task analysis and thematic analysis were used to identify potential risk factors and performance shaping factors across the levels of Rasmussen's framework. These different data sources were then integrated using Rasmussen's Accimap technique to provide an overall analysis of the factors influencing safety during manual handling activities in this context. The findings demonstrate how a systems theory-based approach can be applied to this domain, and suggest that policy-orientated, rather than worker-orientated, changes are required to prevent future manual handling injuries. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Theory of bridge aerodynamics

    National Research Council Canada - National Science Library

    Strømmen, Einar N

    2006-01-01

    ... knowledge of basic structural dynamics, particularly of solution procedures in a modal format. None of the theory related to the determination of eigen values and the corresponding eigen modes are included in this book, i.e. it is taken for granted that the reader is familiar with this part of the theory of structural dynamics. Otherwise...

  8. Beyond Dependency Theory.

    Science.gov (United States)

    Henriquez, Pedro

    1983-01-01

    Dependency theory was part of the reaction against the thesis that proclaimed the benefits of economic integration into the capitalist world. The theory emphasizes the interplay between the internal structures of developing nations and international structures, and analyzes desirable national strategies and policies for structural changes. (CS)

  9. Evaluating Conceptual Metaphor Theory

    Science.gov (United States)

    Gibbs, Raymond W., Jr.

    2011-01-01

    A major revolution in the study of metaphor occurred 30 years ago with the introduction of "conceptual metaphor theory" (CMT). Unlike previous theories of metaphor and metaphorical meaning, CMT proposed that metaphor is not just an aspect of language, but a fundamental part of human thought. Indeed, most metaphorical language arises from…

  10. theory of gravity

    Indian Academy of Sciences (India)

    2016-11-02

    Nov 2, 2016 ... the existence of dark energy and dark matter, several modified theories of gravitation have been proposed as alternative to Einstein's theory. By modifying the geometrical part of Einstein–Hilbert action of general relativity, we obtain the modified gravity. Modified gravity is of great importance because it can ...

  11. Nuclear shell theory

    CERN Document Server

    de-Shalit, Amos; Massey, H S W

    1963-01-01

    Nuclear Shell Theory is a comprehensive textbook dealing with modern methods of the nuclear shell model. This book deals with the mathematical theory of a system of Fermions in a central field. It is divided into three parts. Part I discusses the single particle shell model. The second part focuses on the tensor algebra, two-particle systems. The last part covers three or more particle systems. Chapters on wave functions in a central field, tensor fields, and the m-Scheme are also presented. Physicists, graduate students, and teachers of nuclear physics will find the book invaluable.

  12. Manual de tratamiento de agua

    OpenAIRE

    Pérez Parra, Jorge Arturo

    1981-01-01

    Este Manual de Tratamiento de Agua se ha hecho con la intención de ofrecer en forma conjunta una serie de principios y conocimientos sobre los diferentes procesos de tratamiento del agua, cuya descripción se hace no como operaciones unitarias sino siguiendo un orden práctico encaminado hacia el aspecto teórico y al diseño de las diferentes unidades que componen una planta de tratamiento para el acondicionamiento de las aguas utilizadas como fuente de abastecimiento

  13. Windows 7 The Missing Manual

    CERN Document Server

    Pogue, David

    2010-01-01

    In early reviews, geeks raved about Windows 7. But if you're an ordinary mortal, learning what this new system is all about will be challenging. Fear not: David Pogue's Windows 7: The Missing Manual comes to the rescue. Like its predecessors, this book illuminates its subject with reader-friendly insight, plenty of wit, and hardnosed objectivity for beginners as well as veteran PC users. Windows 7 fixes many of Vista's most painful shortcomings. It's speedier, has fewer intrusive and nagging screens, and is more compatible with peripherals. Plus, Windows 7 introduces a slew of new features,

  14. Field Manual of Wildlife Diseases

    Science.gov (United States)

    Franson, J. Christian; Friend, Milton; Gibbs, Samantha E.J.; Wild, Margaret A.

    2015-01-01

    Welcome to a new version of the “Field Manual of Wildlife Diseases.” Unlike the previous printed versions of this publication, this new version is being developed as a “living“ electronic publication. Content will periodically be added and (or) updated as warranted, and it will always be reviewed by scientific experts (“peer reviewed”) before it is released. Thus, this publication will never be completed, and readers should download revised versions of specific chapters, glossaries, and the appendixes whenever they visit the publication Web site.

  15. The RadAssessor manual

    Energy Technology Data Exchange (ETDEWEB)

    Seitz, Sharon L.

    2007-02-01

    THIS manual will describe the functions and capabilities that are available from the RadAssessor database and will demonstrate how to retrieve and view its information. You’ll learn how to start the database application, how to log in, how to use the common commands, and how to use the online help if you have a question or need extra guidance. RadAssessor can be viewed from any standard web browser. Therefore, you will not need to install any special software before using RadAssessor.

  16. A statistical manual for chemists

    CERN Document Server

    Bauer, Edward

    1971-01-01

    A Statistical Manual for Chemists, Second Edition presents simple and fast statistical tools for data analysis of working chemists. This edition is organized into nine chapters and begins with an overview of the fundamental principles of the statistical techniques used in experimental data analysis. The subsequent chapters deal with the concept of statistical average, experimental design, and analysis of variance. The discussion then shifts to control charts, with particular emphasis on variable charts that are more useful to chemists and chemical engineers. A chapter focuses on the effect

  17. Manual de manipuladores de alimentos

    OpenAIRE

    Montoya Campuzano, Olga Inés

    2000-01-01

    Resumen: en este manual esta referenciado en módulos, los conceptos básicos sobre las normas y hábitos; protección y conservación de alimentos; limpieza y desinfección; saneamiento básico e intoxicaciones alimentarias, que deben conocer, recordar y practicar cualquier persona que manipule alimentos, con el fin de cumplir con los requisitos higiénico sanitarios exigidos por las autoridades sanitarias competentes. EI personal Manipulador es quien en forma directa y permanente, está en contacto ...

  18. Whole Trait Theory

    OpenAIRE

    Fleeson, William; Jayawickreme, Eranda

    2014-01-01

    Personality researchers should modify models of traits to include mechanisms of differential reaction to situations. Whole Trait Theory does so via five main points. First, the descriptive side of traits should be conceptualized as density distributions of states. Second, it is important to provide an explanatory account of the Big 5 traits. Third, adding an explanatory account to the Big 5 creates two parts to traits, an explanatory part and a descriptive part, and these two parts should be ...

  19. IFOAM Training Manual: Training Manual for Organic Agriculture in the Arid and Semi-arid Tropics

    OpenAIRE

    Weidmann, Gilles; Kilcher, Lukas; Garibay, Salvador V.

    2007-01-01

    The first IFOAM Training Manual for Organic Agriculture in the Tropics (the Basic Manual) was published in 2004. The Research Institute of Organic Agriculture (FiBL) together with partners of the organic movement in the Tropics were commissioned by IFOAM to complete two new training manuals that build on the Basic Manual. The new IFOAM training manuals address the two basic climatic zones of the Tropics, the Arid and Semi-Arid Tropics, and the Humid Tropics. For both new manuals, already e...

  20. IFOAM Training Manual: Training Manual for Organic Agriculture in the Humid Tropics

    OpenAIRE

    Kilcher, Lukas; Weidmann, Gilles; Garibay, Salvador V.

    2007-01-01

    The first IFOAM Training Manual for Organic Agriculture in the Tropics (the Basic Manual) was published in 2004. The Research Institute of Organic Agriculture (FiBL) together with partners of the organic movement in the Tropics were commissioned by IFOAM to complete two new training manuals that build on the Basic Manual. The new IFOAM training manuals address the two basic climatic zones of the Tropics, the Arid and Semi-Arid Tropics, and the Humid Tropics. For both new manuals, already e...

  1. Essentials of measure theory

    CERN Document Server

    Kubrusly, Carlos S

    2015-01-01

    Classical in its approach, this textbook is thoughtfully designed and composed in two parts. Part I is meant for a one-semester beginning graduate course in measure theory, proposing an “abstract” approach to measure and integration, where the classical concrete cases of Lebesgue measure and Lebesgue integral are presented as an important particular case of general theory. Part II of the text is more advanced and is addressed to a more experienced reader. The material is designed to cover another one-semester graduate course subsequent to a first course, dealing with measure and integration in topological spaces. The final section of each chapter in Part I presents problems that are integral to each chapter, the majority of which consist of auxiliary results, extensions of the theory, examples, and counterexamples. Problems which are highly theoretical have accompanying hints. The last section of each chapter of Part II consists of Additional Propositions containing auxiliary and complementary results. Th...

  2. Irrigation Training Manual. Planning, Design, Operation, and Management of Small-Scale Irrigation Systems [and] Irrigation Reference Manual. A Technical Reference to Be Used with the Peace Corps Irrigation Training Manual T0076 in the Selection, Planning, Design, Operation, and Management of Small-Scale Irrigation Systems.

    Science.gov (United States)

    Salazar, LeRoy; And Others

    This resource for trainers involved in irrigated agriculture training for Peace Corps volunteers consists of two parts: irrigation training manual and irrigation reference manual. The complete course should fully prepare volunteers serving as irrigation, specialists to plan, implement, evaluate and manage small-scale irrigation projects in arid,…

  3. The Overview of Manual for Building Designers

    OpenAIRE

    Lina Rutkienė

    2011-01-01

    The review analyses the language of the Manual for Building Designers and Constructors (2009). It identifies and scrutinizes mistakes of lexis, syntax, and style, since such mistakes are the most common in the publication analysed. A closer look to this manual was encouraged by the survey carried out in 2010 that interviewed students of the VGTU Faculty of Construction and employees in the construction sector. The said survey results showed that the Manual for Building Designers and Construc...

  4. Landfill gas operation and maintenance manual of practice

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This manual has the following objectives: (1) compile and present key portions of the general body of knowledge about operating and maintaining LFG control systems; (2) present information in an easy to understand format useful for hands-on practical use in the field; (3) present accepted practices and procedures for LFG control practices; (4) highlight key points, common mistakes and lessons learned from more than 20 years of industry experience, point out areas of controversy and indicate alternative practices where applicable; (5) compile key reference information; and (6) provide theory and discussion needed to develop a deeper understanding of LFG control and recovery.

  5. Theory of relations

    CERN Document Server

    Fraïssé, R

    2011-01-01

    The first part of this book concerns the present state of the theory of chains (= total or linear orderings), in connection with some refinements of Ramsey's theorem, due to Galvin and Nash-Williams. This leads to the fundamental Laver's embeddability theorem for scattered chains, using Nash-Williams' better quasi-orderings, barriers and forerunning.The second part (chapters 9 to 12) extends to general relations the main notions and results from order-type theory. An important connection appears with permutation theory (Cameron, Pouzet, Livingstone and Wagner) and with logics (existence criter

  6. Laboratory rat procedural techniques: manual and DVD

    National Research Council Canada - National Science Library

    Bogdanske, John J

    2011-01-01

    .... The manual contains handouts with color illustrations and descriptive text for each technique, including the purpose and application of the procedure, recommended skills, and necessary supplies...

  7. Laboratory mouse procedural techniques: manual and DVD

    National Research Council Canada - National Science Library

    Bogdanske, John J

    2011-01-01

    .... The manual contains handouts with color illustrations and descriptive text for each technique, including the purpose and application of the procedure, recommended skills, and necessary supplies...

  8. Elements of set theory

    CERN Document Server

    Enderton, Herbert B

    1977-01-01

    This is an introductory undergraduate textbook in set theory. In mathematics these days, essentially everything is a set. Some knowledge of set theory is necessary part of the background everyone needs for further study of mathematics. It is also possible to study set theory for its own interest--it is a subject with intruiging results anout simple objects. This book starts with material that nobody can do without. There is no end to what can be learned of set theory, but here is a beginning.

  9. Generation, ascent and eruption of magma on the Moon: New insights into source depths, magma supply, intrusions and effusive/explosive eruptions (Part 1: Theory)

    Science.gov (United States)

    Wilson, Lionel; Head, James W.

    2017-02-01

    reservoir, either at the density trap at the base of the crust or at the rheological trap at the base of the elastic lithosphere, the excess pressure at the top of the magma body will exert an elastic stress on the overlying rocks. This will eventually cause them to fail in tension when the excess pressure has risen to close to twice the tensile strength of the host rocks, perhaps up to ∼10 MPa, allowing a dike to propagate upward from this point. If partial melting occurs in a large region deep in the mantle, however, connections between melt pockets and veins may not occur until a finite amount, probably a few percent, of melting has occurred. When interconnection does occur, the excess pressure at the top of the partial melt zone will rise abruptly to a high value, again initiating a brittle fracture, i.e. a dike. That sudden excess pressure is proportional to the vertical extent of the melt zone, the difference in density between the host rocks and the melt, and the acceleration due to gravity, and could readily be ∼100 MPa, vastly greater than the value needed to initiate a dike. We therefore explored excess pressures in the range ∼10 to ∼100 MPa. If eruptions take place through dikes extending upward from the base of the crust, the mantle magma pressure at the point where the dike is initiated must exceed the pressure due to the weight of the magmatic liquid column. This means that on the nearside the excess pressure must be at least ∼19 ± 9 MPa and on the farside must be ∼29 ± 15 MPa. If the top of the magma body feeding an erupting dike is a little way below the base of the crust, slightly smaller excess pressures are needed because the magma is positively buoyant in the part of the dike within the upper mantle. Even the smallest of these excess pressures is greater than the ∼10 MPa likely maximum value in a magma reservoir at the base of the crust or elastic lithosphere, but the values are easily met by the excess pressures in extensive partial melt

  10. Governance and organizational theory

    Directory of Open Access Journals (Sweden)

    Carlos E. Quintero Castellanos

    2017-07-01

    Full Text Available The objective of this essay is to propose a way to link the theoretical body that has been weaved around governance and organizational theory. For this, a critical exposition is done about what is the theoretical core of governance, the opportunity areas are identified for the link of this theory with organizational theory. The essay concludes with a proposal for the organizational analysis of administrations in governance. The essay addresses with five sections. The first one is the introduction. In the second one, I present a synthesis of the governance in its current use. In the next one are presented the work lines of the good governance. In the fourth part, I show the organizational and managerial limits in the governance theory. The last part develops the harmonization proposal for the governance and organizational theories.

  11. Theory of gravitational interactions

    CERN Document Server

    Gasperini, Maurizio

    2013-01-01

    This reference textbook is an up-to-date and self-contained introduction to the theory of gravitational interactions. The first part of the book follows the traditional presentation of general relativity as a geometric theory of the macroscopic gravitational field. A second, advanced part then discusses the deep analogies (and differences) between a geometric theory of gravity and the gauge theories of the other fundamental interactions. This fills a gap which is present in the context of the traditional approach to general relativity, and which usually makes students puzzled about the role of gravity. The necessary notions of differential geometry are reduced to the minimum, leaving more room for those aspects of gravitational physics of current phenomenological and theoretical interest, such as the properties of gravitational waves, the gravitational interactions of spinors, and the supersymmetric and higher-dimensional generalization of the Einstein equations. Theory of Gravitational Interactions will be o...

  12. Dissociating effector and movement direction selection during the preparation of manual reaching movements: evidence from lateralized ERP components.

    Science.gov (United States)

    Gherri, Elena; Van Velzen, José; Eimer, Martin

    2007-09-01

    The present study investigated whether lateralized ERP components triggered during covert manual response preparation (ADAN, LDAP) reflect effector selection, the selection of movement direction, or both. Event-related brain potentials were recorded during a response precueing paradigm where visual cues provided either partial (Experiment 1) or full (Experiment 2) information about the response hand and the direction for a subsequent reaching movement. ADAN and LDAP components were elicited even when only partial response information was available, demonstrating that they do not require the presence of a fully specified motor program. The ADAN was elicited in a similar fashion regardless of whether effector or movement direction information was provided, suggesting that the underlying mechanisms are equally sensitive to both types of response-related information. In contrast, the LDAP was larger in response to cues providing effector information, but was also reliably present when movement direction was available. ADAN and LDAP components reflect preparatory activity within anterior and posterior parts of the parieto-premotor sensorimotor network where different parameters for manual reaching movements are programmed independently. These results support the claim of the premotor theory of attention that shared sensorimotor control mechanisms are involved in attention and motor programming.

  13. Manual for the Deaf-Blind Program and Ability Screening Test.

    Science.gov (United States)

    Lyall, J.; And Others

    Presented are a manual and a screening test to assist teachers and professionals to determine the functional ability level and individual program needs of deaf blind and multiply handicapped children. It is noted that the individually administered 10-minute test, based on Gesell's developmental theory, consists of items in seven basic…

  14. Teaching Career Education in Social Studies, Grades 10-12. World Culture, Ancient and Medieval History, Modern History. Resource Manual No. 314.

    Science.gov (United States)

    Strain, Mary Pat; Berninger, Roger

    Activities and teaching strategies proposed in this resource manual are intended to help social studies teachers at the high school level in adapting the career education philosophy to the classroom. The manual consists of two parts. Part 1 identifies goals and objectives of career education and various social studies subjects (world culture,…

  15. Quantum Theory and Beyond

    Science.gov (United States)

    Bastin, Ted

    2009-07-01

    List of participants; Preface; Part I. Introduction: 1. The function of the colloquium - editorial; 2. The conceptual problem of quantum theory from the experimentalist's point of view O. R. Frisch; Part II. Niels Bohr and Complementarity: The Place of the Classical Language: 3. The Copenhagen interpretation C. F. von Weizsäcker; 4. On Bohr's views concerning the quantum theory D. Bohm; Part III. The Measurement Problem: 5. Quantal observation in statistical interpretation H. J. Groenewold; 6. Macroscopic physics, quantum mechanics and quantum theory of measurement G. M. Prosperi; 7. Comment on the Daneri-Loinger-Prosperi quantum theory of measurement Jeffrey Bub; 8. The phenomenology of observation and explanation in quantum theory J. H. M. Whiteman; 9. Measurement theory and complex systems M. A. Garstens; Part IV. New Directions within Quantum Theory: What does the Quantum Theoretical Formalism Really Tell Us?: 10. On the role of hidden variables in the fundamental structure of physics D. Bohm; 11. Beyond what? Discussion: space-time order within existing quantum theory C. W. Kilmister; 12. Definability and measurability in quantum theory Yakir Aharonov and Aage Petersen; 13. The bootstrap idea and the foundations of quantum theory Geoffrey F. Chew; Part V. A Fresh Start?: 14. Angular momentum: an approach to combinatorial space-time Roger Penrose; 15. A note on discreteness, phase space and cohomology theory B. J. Hiley; 16. Cohomology of observations R. H. Atkin; 17. The origin of half-integral spin in a discrete physical space Ted Bastin; Part VI. Philosophical Papers: 18. The unity of physics C. F. von Weizsäcker; 19. A philosophical obstacle to the rise of new theories in microphysics Mario Bunge; 20. The incompleteness of quantum mechanics or the emperor's missing clothes H. R. Post; 21. How does a particle get from A to B?; Ted Bastin; 22. Informational generalization of entropy in physics Jerome Rothstein; 23. Can life explain quantum mechanics? H. H

  16. Hanford Engineer Works technical manual

    Energy Technology Data Exchange (ETDEWEB)

    1944-05-01

    The uranium metal, as discharged from the piles in the 100 Areas, contains the alpha emitting product, plutonium, in concentration in the neighborhood of 150--250 grams per metric ton, along with similar amounts of beta and gamma fission elements. It is the purpose of the Separations Plant to effect the separation of this product from the uranium metal and fission elements, and to prepare a concentrated, relatively pure solution of plutonium nitrate as the final product of the Hanford Plant. This section of the manual discusses the chemistry of the separations process, describes the buildings and equipment provided for carrying out the various steps in the operation, and presents the detailed operating procedures used. There are included, in many instances, references to other documents presenting a more detailed view of a specific point in the process.

  17. Justine user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.R.

    1995-10-01

    Justine is the graphical user interface to the Los Alamos Radiation Modeling Interactive Environment (LARAMIE). It provides LARAMIE customers with a powerful, robust, easy-to-use, WYSIWYG interface that facilitates geometry construction and problem specification. It is assumed that the reader is familiar with LARAMIE, and the transport codes available, i.e., MCNPTM and DANTSYSTM. No attempt is made in this manual to describe these codes in detail. Information about LARAMIE, DANTSYS, and MCNP are available elsewhere. It i also assumed that the reader is familiar with the Unix operating system and with Motif widgets and their look and feel. However, a brief description of Motif and how one interacts with it can be found in Appendix A.

  18. HTML5 The Missing Manual

    CERN Document Server

    MacDonald, Matthew

    2011-01-01

    HTML5 is more than a markup language-it's a dozen independent web standards all rolled into one. Until now, all it's been missing is a manual. With this thorough, jargon-free guide, you'll learn how to build web apps that include video tools, dynamic drawings, geolocation, offline web apps, drag-and-drop, and many other features. HTML5 is the future of the Web, and with this book you'll reach it quickly. The important stuff you need to know: Structure web pages in a new way. Learn how HTML5 helps make web design tools and search engines work smarter.Add audio and video without plugins. Build

  19. ROOT CAUSE ANALYSIS PROGRAM MANUAL

    Energy Technology Data Exchange (ETDEWEB)

    Gravois, Melanie C.

    2007-05-02

    Root Cause Analysis (RCA) identifies the cause of an adverse condition that, if corrected, will preclude recurrence or greatly reduce the probability of recurrence of the same or similar adverse conditions and thereby protect the health and safety of the public, the workers, and the environment. This procedure sets forth the requirements for management determination and the selection of RCA methods and implementation of RCAs that are a result of significant findings from Price-Anderson Amendments Act (PAAA) violations, occurrences/events, Significant Adverse Conditions, and external oversight Corrective Action Requests (CARs) generated by the Office of Enforcement (PAAA headquarters), the U.S. Environmental Protection Agency, and other oversight entities against Lawrence Berkeley National Laboratory (LBNL). Performance of an RCA may result in the identification of issues that should be reported in accordance with the Issues Management Program Manual.

  20. Energy management information systems - planning manual and tool

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    An Energy Management Information System (EMIS) provides relevant information that makes energy, performance visible to various levels of an organization, enabling individuals and departments to plan, make decisions and take effective action to manage energy. This manual has two objectives: 1. To enable companies to conduct EMIS audits and prepare EMIS implementation plans; 2. To provide companies with the tools to prepare a financial business case for EMIS implementation. This manual consists of four parts: 1. EMIS Audit is theoretical and provides the methodology to be used by outside or in-house engineers and consultants to do a thorough EMIS Audit. 2. Implementation Plan is to help industry do the work themselves. 3. Appendices is to help the user develop an EMIS Audit, gather data and score their company, prepare a conceptual and detailed design, as well as a business and financial plan for implementation.