WorldWideScience

Sample records for tetra-cyclic furoquinones simulating

  1. Studies on polynuclear furoquinones. Part 1: Synthesis of tri- and tetra-cyclic furoquinones simulating BCD/ABCD ring system of furoquinone diterpenoids

    Directory of Open Access Journals (Sweden)

    Faruk H. Shaik

    2009-09-01

    Full Text Available Synthesis of phenanthro[1,2-b]furan-10,11-dione, the core nucleus present in Tanshinone-I is described in 8–10 steps starting from 2-bromo-3,4-dihydro-1-naphthaldehyde. The bromoaldehyde was converted to methyl 2-(2-bromo-1-naphthylacetate or 2-(2-bromo-1-naphthylacetonitrile following the protocol of functional group transformations. Subsequent Suzuki coupling of this ester/nitrile derivative with furan-2-boronic acid produced [2-(2-furyl-1-naphthyl]acetic ester/nitrile which on hydrolysis furnished the corresponding acid derivative. Cyclization of the acid followed by oxidation of the phenol, with Fremy’s salt, produced the tetra-cyclic furoquinone, phenanthro[1,2-b]furan-10,11-dione. This method has also been extended for the synthesis of the tricyclic furoquinone, naphtho[1,2-b]furan-4,5-dione.

  2. GC-MS analysis of penta- and tetra-cyclic triterpenes from resins of Pistacia species. Part I. Pistacia lentiscus var. Chia.

    Science.gov (United States)

    Assimopoulou, A N; Papageorgiou, V P

    2005-05-01

    Pistacia species contain oleoresins with bioactive triterpenes. In this study triterpenes, including minor components, were identified and quantified in both neutral and acidic fraction of Pistacia lentiscus var. Chia resin, grown exclusively in Chios island (Greece), collected traditionally, as well as by the use of stimulating agents (liquid collection). It was proved that these two resin samples were composed of several different minor triterpenes. In the traditional collection of the resin, 36 triterpenes were identified, 23 of which are new minor compounds (five in the acidic and eighteen in the neutral fraction). In the liquid collection resin eight compounds were identified in the acidic and 11 in the neutral fraction, while seven compounds were not contained in resin traditionally collected. The main triterpenes in both resin samples collected traditionally and by use of stimulating agents were in the following order: isomasticadienonic acid (24 and 22.5% w/w of triterpenic fraction respectively), masticadienonic acid (9.3 and 14.7% w/w of triterpenic fraction) and 28-norolean-17-en-3-one (19 and 36% w/w of triterpenic fraction respectively). The aim of this study was to compare the qualitative and quantitative composition of triterpenes in the resin samples collected using the traditional and new liquid techniques, and examine whether the collection technique influences the contained triterpenes in P. lentiscus var. Chia resin samples. Finally, since there is confusion on interpreting mass spectra of triterpenes we present an analytical review on the base peaks, main fragments and fragmentation mechanism/pattern of several skeleton penta- and tetra- cyclic triterpenes reported in P. lentiscus resin. Also, a biosynthetic route for triterpene skeletons contained in P. lentiscus resin was approached.

  3. From α-Bromomethylbutenolide to Fused Tri(Tetra Cyclic Dihydrofurandiones through Barbier Reaction–Heck Arylation Sequence

    Directory of Open Access Journals (Sweden)

    Arbia Talbi

    2017-12-01

    Full Text Available A Barbier reaction–Heck arylation sequence from α-bromomethylbutenolide to fused tri and tetracyclic lactones has been developed. The first step involving a Barbier reaction enabled installing ortho-bromoaromatics in α-ylidene γ-lactones. The latter substrates were subjected to intramolecular Heck reaction conditions which selectively afforded 6,5,5 or 6,6,5 fused ring systems depending on the nature of the base employed.

  4. Simulations

    CERN Document Server

    Ngada, Narcisse

    2015-06-15

    The complexity and cost of building and running high-power electrical systems make the use of simulations unavoidable. The simulations available today provide great understanding about how systems really operate. This paper helps the reader to gain an insight into simulation in the field of power converters for particle accelerators. Starting with the definition and basic principles of simulation, two simulation types, as well as their leading tools, are presented: analog and numerical simulations. Some practical applications of each simulation type are also considered. The final conclusion then summarizes the main important items to keep in mind before opting for a simulation tool or before performing a simulation.

  5. Simulation

    DEFF Research Database (Denmark)

    Gould, Derek A; Chalmers, Nicholas; Johnson, Sheena J

    2012-01-01

    Recognition of the many limitations of traditional apprenticeship training is driving new approaches to learning medical procedural skills. Among simulation technologies and methods available today, computer-based systems are topical and bring the benefits of automated, repeatable, and reliable...... performance assessments. Human factors research is central to simulator model development that is relevant to real-world imaging-guided interventional tasks and to the credentialing programs in which it would be used....

  6. Simulation

    CERN Document Server

    Ross, Sheldon

    2006-01-01

    Ross's Simulation, Fourth Edition introduces aspiring and practicing actuaries, engineers, computer scientists and others to the practical aspects of constructing computerized simulation studies to analyze and interpret real phenomena. Readers learn to apply results of these analyses to problems in a wide variety of fields to obtain effective, accurate solutions and make predictions about future outcomes. This text explains how a computer can be used to generate random numbers, and how to use these random numbers to generate the behavior of a stochastic model over time. It presents the statist

  7. GC-MS analysis of penta- and tetra-cyclic triterpenes from resins of Pistacia species. Part II. Pistacia terebinthus var. Chia.

    Science.gov (United States)

    Assimopoulou, A N; Papageorgiou, V P

    2005-10-01

    Pistacia species contain oleoresins with bioactive triterpenes. In this study triterpenes, including minor components, were identified and quantified in both neutral and acidic fractions of Pistacia terebinthus var. Chia resin, grown exclusively in Chios island (Greece), collected traditionally, as well as using stimulating agents (liquid collection). It was proved that these two resin samples were composed of several different minor triterpenes, while major constituents were similar but in different proportions. Compounds that differentiated two resin samples of P. lentiscus and P. terebinthus var. Chia, both traditionally collected, were detected, in order to identify the nature of resins present in archaeological materials. In the traditionally collected resin, 37 triterpenes were identified, 12 in the acidic and 25 in the neutral fraction. In the liquid collection resin 10 compounds were identified in the acidic and 23 in the neutral fraction, while 16 compounds were not contained in the traditionally collected resin. The main triterpenes in both resin samples collected traditionally and using stimulating agents were: isomasticadienonic acid (23.6 and 26.3% w[sol ]w of the triterpenic fraction, respectively), 28-norolean-17-en-3-one (16.3 and 17.5% w[sol ]w of the triterpenic fraction, respectively) and masticadienonic acid (5.8 and 6.0% w[sol ]w of the triterpenic fraction). In this study the qualitative and quantitative composition of triterpenes was compared in the Pistacia lentiscus and P. terebinthus var. Chia resin samples collected with the traditional and new liquid techniques, and also triterpenes in resins of P. terebinthus obtained by the traditional technique and using stimulating agents. The aim of the study was also to examine whether the collection technique influenced the triterpenes contained in P. terebinthus var. Chia resin samples. Copyright (c) 2005 John Wiley & Sons, Ltd.

  8. Simulation reframed.

    Science.gov (United States)

    Kneebone, Roger L

    2016-01-01

    Simulation is firmly established as a mainstay of clinical education, and extensive research has demonstrated its value. Current practice uses inanimate simulators (with a range of complexity, sophistication and cost) to address the patient 'as body' and trained actors or lay people (Simulated Patients) to address the patient 'as person'. These approaches are often separate.Healthcare simulation to date has been largely for the training and assessment of clinical 'insiders', simulating current practices. A close coupling with the clinical world restricts access to the facilities and practices of simulation, often excluding patients, families and publics. Yet such perspectives are an essential component of clinical practice. This paper argues that simulation offers opportunities to move outside a clinical 'insider' frame and create connections with other individuals and groups. Simulation becomes a bridge between experts whose worlds do not usually intersect, inviting an exchange of insights around embodied practices-the 'doing' of medicine-without jeopardising the safety of actual patients.Healthcare practice and education take place within a clinical frame that often conceals parallels with other domains of expert practice. Valuable insights emerge by viewing clinical practice not only as the application of medical science but also as performance and craftsmanship.Such connections require a redefinition of simulation. Its essence is not expensive elaborate facilities. Developments such as hybrid, distributed and sequential simulation offer examples of how simulation can combine 'patient as body' with 'patient as person' at relatively low cost, democratising simulation and exerting traction beyond the clinical sphere.The essence of simulation is a purposeful design, based on an active process of selection from an originary world, abstraction of what is criterial and re - presentation in another setting for a particular purpose or audience. This may be done within

  9. SJFHQ Simulation

    OpenAIRE

    Schacher, Gordon; Dailey, James; Looney, John; Saylor, Steven; Jenson, Jack; Hutchins, Susan; Gallup, Shelley

    2004-01-01

    A four level architecture has been developed for SJFHQ processes. This architecture has been used to develop a simulation of SJFHQ operations. Correct simulation performance has been verified and initial results produced. The results focus on personal work tasking and multi-tasking effects.

  10. Excel simulations

    CERN Document Server

    Verschuuren, Gerard M

    2013-01-01

    Covering a variety of Excel simulations, from gambling to genetics, this introduction is for people interested in modeling future events, without the cost of an expensive textbook. The simulations covered offer a fun alternative to the usual Excel topics and include situations such as roulette, password cracking, sex determination, population growth, and traffic patterns, among many others.

  11. Simulation tools

    CERN Document Server

    Jenni, F

    2006-01-01

    In the last two decades, simulation tools made a significant contribution to the great progress in development of power electronics. Time to market was shortened and development costs were reduced drastically. Falling costs, as well as improved speed and precision, opened new fields of application. Today, continuous and switched circuits can be mixed. A comfortable number of powerful simulation tools is available. The users have to choose the best suitable for their application. Here a simple rule applies: The best available simulation tool is the tool the user is already used to (provided, it can solve the task). Abilities, speed, user friendliness and other features are continuously being improved—even though they are already powerful and comfortable. This paper aims at giving the reader an insight into the simulation of power electronics. Starting with a short description of the fundamentals of a simulation tool as well as properties of tools, several tools are presented. Starting with simplified models ...

  12. Simulation Exercises

    Science.gov (United States)

    Tansey, Pat

    1976-01-01

    Describes five simulation exercises: a problem for a student teacher, an industrial relations game, a series of student problems; an international relations crisis, and a sociological exercise on public and private opinions. (LS)

  13. Solar simulator

    NARCIS (Netherlands)

    Roest, S.J.M.

    2012-01-01

    Solar simulator comprising at least at least one high-intensity discharge (HID) lamp type,and at least one halogen lamp type, which lamps are applied simultaneously and are provided with infrared filter means to provide a mixture of light approximating radiated sunlight,wherein the infrared filter

  14. Simulating Gravity

    Science.gov (United States)

    Pipinos, Savas

    2010-01-01

    This article describes one classroom activity in which the author simulates the Newtonian gravity, and employs the Euclidean Geometry with the use of new technologies (NT). The prerequisites for this activity were some knowledge of the formulae for a particle free fall in Physics and most certainly, a good understanding of the notion of similarity…

  15. Neuromechanical simulation

    Directory of Open Access Journals (Sweden)

    Donald H Edwards

    2010-07-01

    Full Text Available The importance of the interaction between the body and the brain for the control of behavior has been recognized in recent years with the advent of neuromechanics, a field in which the coupling between neural and biomechanical processes is an explicit focus. A major tool used in neuromechanics is simulation, which connects computational models of neural circuits to models of an animal’s body situated in a virtual physical world. This connection closes the feedback loop that links the brain, the body, and the world through sensory stimuli, muscle contractions and body movement. Neuromechanical simulations enable investigators to explore the dynamical relationships between the brain, the body, and the world in ways that are difficult or impossible through experiment alone. Studies in a variety of animals have permitted the analysis of extremely complex and dynamic neuromechanical systems, they have demonstrated that the nervous system functions synergistically with the mechanical properties of the body, they have examined hypotheses that are difficult to test experimentally, and they have explored the role of sensory feedback in controlling complex mechanical systems with many degrees of freedom. Each of these studies confronts a common set of questions: (i how to abstract key features of the body, the world and the CNS in a useful model, (ii how to ground model parameters in experimental reality, (iii how to optimize the model and identify points of sensitivity and insensitivity, and (iv how to share neuromechanical models for examination, testing, and extension by others.

  16. Comparing simulation results of SBML capable simulators

    Science.gov (United States)

    Bergmann, Frank T.; Sauro, Herbert M.

    2008-01-01

    Motivation: Simulations are an essential tool when analyzing biochemical networks. Researchers and developers seeking to refine simulation tools or develop new ones would benefit greatly from being able to compare their simulation results. Summary: We present an approach to compare simulation results between several SBML capable simulators and provide a website for the community to share simulation results. Availability: The website with simulation results and additional material can be found under: http://sys-bio.org/sbwWiki/compare. The software used to generate the simulation results is available on the website for download. Contact: fbergman@u.washington.edu PMID:18579569

  17. Simulated Breeding

    Science.gov (United States)

    Unemi, Tatsuo

    This chapter describes a basic framework of simulated breeding, a type of interactive evolutionary computing to breed artifacts, whose origin is Blind Watchmaker by Dawkins. These methods make it easy for humans to design a complex object adapted to his/her subjective criteria, just similarly to agricultural products we have been developing over thousands of years. Starting from randomly initialized genome, the solution candidates are improved through several generations with artificial selection. The graphical user interface helps the process of breeding with techniques of multifield user interface and partial breeding. The former improves the diversity of individuals that prevents being trapped at local optimum. The latter makes it possible for the user to fix features he/she already satisfied. These methods were examined through artistic applications by the author: SBART for graphics art and SBEAT for music. Combining with a direct genome editor and exportation to another graphical or musical tool on the computer, they can be powerful tools for artistic creation. These systems may contribute to the creation of a type of new culture.

  18. Manned Flight Simulator (MFS)

    Data.gov (United States)

    Federal Laboratory Consortium — The Aircraft Simulation Division, home to the Manned Flight Simulator (MFS), provides real-time, high fidelity, hardware-in-the-loop flight simulation capabilities...

  19. LOADING SIMULATION PROGRAM C

    Science.gov (United States)

    LSPC is the Loading Simulation Program in C++, a watershed modeling system that includes streamlined Hydrologic Simulation Program Fortran (HSPF) algorithms for simulating hydrology, sediment, and general water quality

  20. Parallel discrete event simulation

    NARCIS (Netherlands)

    Overeinder, B.J.; Hertzberger, L.O.; Sloot, P.M.A.; Withagen, W.J.

    1991-01-01

    In simulating applications for execution on specific computing systems, the simulation performance figures must be known in a short period of time. One basic approach to the problem of reducing the required simulation time is the exploitation of parallelism. However, in parallelizing the simulation

  1. Combine Harvester Simulator

    DEFF Research Database (Denmark)

    Vilmann, Ole; Sørlie, James Arnold

    1999-01-01

    A simulator for training pilots in the operation of a modern high-tech combine harvester is presented. The new simulator application is based on DMI´s well-known DMS maritime simulator architecture. Two major challenges have been encountered in the development of the simulator: 1) interfacing the...

  2. COCOA: Simulating Observations of Star Cluster Simulations

    Science.gov (United States)

    Askar, Abbas; Giersz, Mirek; Pych, Wojciech; Dalessandro, Emanuele

    2017-03-01

    COCOA (Cluster simulatiOn Comparison with ObservAtions) creates idealized mock photometric observations using results from numerical simulations of star cluster evolution. COCOA is able to present the output of realistic numerical simulations of star clusters carried out using Monte Carlo or N-body codes in a way that is useful for direct comparison with photometric observations. The code can simulate optical observations from simulation snapshots in which positions and magnitudes of objects are known. The parameters for simulating the observations can be adjusted to mimic telescopes of various sizes. COCOA also has a photometry pipeline that can use standalone versions of DAOPHOT (ascl:1104.011) and ALLSTAR to produce photometric catalogs for all observed stars.

  3. The ATLAS Simulation Infrastructure

    CERN Document Server

    Aad, G.; Abdallah, J.; Abdelalim, A.A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; Abramowicz, H.; Abreu, H.; Acharya, B.S.; Adams, D.L.; Addy, T.N.; Adelman, J.; Adorisio, C.; Adragna, P.; Adye, T.; Aefsky, S.; Aguilar-Saavedra, J.A.; Aharrouche, M.; Ahlen, S.P.; Ahles, F.; Ahmad, A.; Ahmed, H.; Ahsan, M.; Aielli, G.; Akdogan, T.; Akesson, T.P.A.; Akimoto, G.; Akimov, A.V.; Aktas, A.; Alam, M.S.; Alam, M.A.; Albrand, S.; Aleksa, M.; Aleksandrov, I.N.; Alexa, C.; Alexander, G.; Alexandre, G.; Alexopoulos, T.; Alhroob, M.; Aliev, M.; Alimonti, G.; Alison, J.; Aliyev, M.; Allport, P.P.; Allwood-Spiers, S.E.; Almond, J.; Aloisio, A.; Alon, R.; Alonso, A.; Alviggi, M.G.; Amako, K.; Amelung, C.; Amorim, A.; Amoros, G.; Amram, N.; Anastopoulos, C.; Andeen, T.; Anders, C.F.; Anderson, K.J.; Andreazza, A.; Andrei, V.; Anduaga, X.S.; Angerami, A.; Anghinolfi, F.; Anjos, N.; Annovi, A.; Antonaki, A.; Antonelli, M.; Antonelli, S.; Antos, J.; Antunovic, B.; Anulli, F.; Aoun, S.; Arabidze, G.; Aracena, I.; Arai, Y.; Arce, A.T.H.; Archambault, J.P.; Arfaoui, S.; Arguin, J-F.; Argyropoulos, T.; Arik, M.; Armbruster, A.J.; Arnaez, O.; Arnault, C.; Artamonov, A.; Arutinov, D.; Asai, M.; Asai, S.; Asfandiyarov, R.; Ask, S.; Asman, B.; Asner, D.; Asquith, L.; Assamagan, K.; Astbury, A.; Astvatsatourov, A.; Atoian, G.; Auerbach, B.; Augsten, K.; Aurousseau, M.; Austin, N.; Avolio, G.; Avramidou, R.; Axen, D.; Ay, C.; Azuelos, G.; Azuma, Y.; Baak, M.A.; Bach, A.M.; Bachacou, H.; Bachas, K.; Backes, M.; Badescu, E.; Bagnaia, P.; Bai, Y.; Bain, T.; Baines, J.T.; Baker, O.K.; Baker, M.D.; Baker, S; Baltasar Dos Santos Pedrosa, F.; Banas, E.; Banerjee, P.; Banerjee, S.; Banfi, D.; Bangert, A.; Bansal, V.; Baranov, S.P.; Baranov, S.; Barashkou, A.; Barber, T.; Barberio, E.L.; Barberis, D.; Barbero, M.; Bardin, D.Y.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnett, B.M.; Barnett, R.M.; Baroncelli, A.; Barr, A.J.; Barreiro, F.; Barreiro Guimaraes da Costa, J.; Barrillon, P.; Bartoldus, R.; Bartsch, D.; Bates, R.L.; Batkova, L.; Batley, J.R.; Battaglia, A.; Battistin, M.; Bauer, F.; Bawa, H.S.; Bazalova, M.; Beare, B.; Beau, T.; Beauchemin, P.H.; Beccherle, R.; Becerici, N.; Bechtle, P.; Beck, G.A.; Beck, H.P.; Beckingham, M.; Becks, K.H.; Beddall, A.J.; Beddall, A.; Bednyakov, V.A.; Bee, C.; Begel, M.; Behar Harpaz, S.; Behera, P.K.; Beimforde, M.; Belanger-Champagne, C.; Bell, P.J.; Bell, W.H.; Bella, G.; Bellagamba, L.; Bellina, F.; Bellomo, M.; Belloni, A.; Belotskiy, K.; Beltramello, O.; Ben Ami, S.; Benary, O.; Benchekroun, D.; Bendel, M.; Benedict, B.H.; Benekos, N.; Benhammou, Y.; Benincasa, G.P.; Benjamin, D.P.; Benoit, M.; Bensinger, J.R.; Benslama, K.; Bentvelsen, S.; Beretta, M.; Berge, D.; Bergeaas Kuutmann, E.; Berger, N.; Berghaus, F.; Berglund, E.; Beringer, J.; Bernat, P.; Bernhard, R.; Bernius, C.; Berry, T.; Bertin, A.; Besana, M.I.; Besson, N.; Bethke, S.; Bianchi, R.M.; Bianco, M.; Biebel, O.; Biesiada, J.; Biglietti, M.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biscarat, C.; Bitenc, U.; Black, K.M.; Blair, R.E.; Blanchard, J-B; Blanchot, G.; Blocker, C.; Blondel, A.; Blum, W.; Blumenschein, U.; Bobbink, G.J.; Bocci, A.; Boehler, M.; Boek, J.; Boelaert, N.; Boser, S.; Bogaerts, J.A.; Bogouch, A.; Bohm, C.; Bohm, J.; Boisvert, V.; Bold, T.; Boldea, V.; Bondarenko, V.G.; Bondioli, M.; Boonekamp, M.; Bordoni, S.; Borer, C.; Borisov, A.; Borissov, G.; Borjanovic, I.; Borroni, S.; Bos, K.; Boscherini, D.; Bosman, M.; Boterenbrood, H.; Bouchami, J.; Boudreau, J.; Bouhova-Thacker, E.V.; Boulahouache, C.; Bourdarios, C.; Boveia, A.; Boyd, J.; Boyko, I.R.; Bozovic-Jelisavcic, I.; Bracinik, J.; Braem, A.; Branchini, P.; Brandenburg, G.W.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J.E.; Braun, H.M.; Brelier, B.; Bremer, J.; Brenner, R.; Bressler, S.; Britton, D.; Brochu, F.M.; Brock, I.; Brock, R.; Brodet, E.; Bromberg, C.; Brooijmans, G.; Brooks, W.K.; Brown, G.; Bruckman de Renstrom, P.A.; Bruncko, D.; Bruneliere, R.; Brunet, S.; Bruni, A.; Bruni, G.; Bruschi, M.; Bucci, F.; Buchanan, J.; Buchholz, P.; Buckley, A.G.; Budagov, I.A.; Budick, B.; Buscher, V.; Bugge, L.; Bulekov, O.; Bunse, M.; Buran, T.; Burckhart, H.; Burdin, S.; Burgess, T.; Burke, S.; Busato, E.; Bussey, P.; Buszello, C.P.; Butin, F.; Butler, B.; Butler, J.M.; Buttar, C.M.; Butterworth, J.M.; Byatt, T.; Caballero, J.; Cabrera Urban, S.; Caforio, D.; Cakir, O.; Calafiura, P.; Calderini, G.; Calfayan, P.; Calkins, R.; Caloba, L.P.; Calvet, D.; Camarri, P.; Cameron, D.; Campana, S.; Campanelli, M.; Canale, V.; Canelli, F.; Canepa, A.; Cantero, J.; Capasso, L.; Capeans Garrido, M.D.M.; Caprini, I.; Caprini, M.; Capua, M.; Caputo, R.; Caramarcu, C.; Cardarelli, R.; Carli, T.; Carlino, G.; Carminati, L.; Caron, B.; Caron, S.; Carrillo Montoya, G.D.; Carron Montero, S.; Carter, A.A.; Carter, J.R.; Carvalho, J.; Casadei, D.; Casado, M.P.; Cascella, M.; Castaneda Hernandez, A.M.; Castaneda-Miranda, E.; Castillo Gimenez, V.; Castro, N.F.; Cataldi, G.; Catinaccio, A.; Catmore, J.R.; Cattai, A.; Cattani, G.; Caughron, S.; Cauz, D.; Cavalleri, P.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerqueira, A.S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cetin, S.A.; Chafaq, A.; Chakraborty, D.; Chan, K.; Chapman, J.D.; Chapman, J.W.; Chareyre, E.; Charlton, D.G.; Chavda, V.; Cheatham, S.; Chekanov, S.; Chekulaev, S.V.; Chelkov, G.A.; Chen, H.; Chen, S.; Chen, X.; Cheplakov, A.; Chepurnov, V.F.; Cherkaoui El Moursli, R.; Tcherniatine, V.; Chesneanu, D.; Cheu, E.; Cheung, S.L.; Chevalier, L.; Chevallier, F.; Chiarella, V.; Chiefari, G.; Chikovani, L.; Childers, J.T.; Chilingarov, A.; Chiodini, G.; Chizhov, V.; Choudalakis, G.; Chouridou, S.; Christidi, I.A.; Christov, A.; Chromek-Burckhart, D.; Chu, M.L.; Chudoba, J.; Ciapetti, G.; Ciftci, A.K.; Ciftci, R.; Cinca, D.; Cindro, V.; Ciobotaru, M.D.; Ciocca, C.; Ciocio, A.; Cirilli, M.; Citterio, M.; Clark, A.; Clark, P.J.; Cleland, W.; Clemens, J.C.; Clement, B.; Clement, C.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coggeshall, J.; Cogneras, E.; Colijn, A.P.; Collard, C.; Collins, N.J.; Collins-Tooth, C.; Collot, J.; Colon, G.; Conde Muino, P.; Coniavitis, E.; Consonni, M.; Constantinescu, S.; Conta, C.; Conventi, F.; Cooke, M.; Cooper, B.D.; Cooper-Sarkar, A.M.; Cooper-Smith, N.J.; Copic, K.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Corso-Radu, A.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M.J.; Costanzo, D.; Costin, T.; Cote, D.; Coura Torres, R.; Courneyea, L.; Cowan, G.; Cowden, C.; Cox, B.E.; Cranmer, K.; Cranshaw, J.; Cristinziani, M.; Crosetti, G.; Crupi, R.; Crepe-Renaudin, S.; Cuenca Almenar, C.; Cuhadar Donszelmann, T.; Curatolo, M.; Curtis, C.J.; Cwetanski, P.; Czyczula, Z.; D'Auria, S.; D'Onofrio, M.; D'Orazio, A.; Da Via, C; Dabrowski, W.; Dai, T.; Dallapiccola, C.; Dallison, S.J.; Daly, C.H.; Dam, M.; Danielsson, H.O.; Dannheim, D.; Dao, V.; Darbo, G.; Darlea, G.L.; Davey, W.; Davidek, T.; Davidson, N.; Davidson, R.; Davies, M.; Davison, A.R.; Dawson, I.; Daya, R.K.; De, K.; de Asmundis, R.; De Castro, S.; De Castro Faria Salgado, P.E.; De Cecco, S.; de Graat, J.; De Groot, N.; de Jong, P.; De Mora, L.; De Oliveira Branco, M.; De Pedis, D.; De Salvo, A.; De Sanctis, U.; De Santo, A.; De Vivie De Regie, J.B.; De Zorzi, G.; Dean, S.; Dedovich, D.V.; Degenhardt, J.; Dehchar, M.; Del Papa, C.; Del Peso, J.; Del Prete, T.; Dell'Acqua, A.; Dell'Asta, L.; Della Pietra, M.; della Volpe, D.; Delmastro, M.; Delsart, P.A.; Deluca, C.; Demers, S.; Demichev, M.; Demirkoz, B.; Deng, J.; Deng, W.; Denisov, S.P.; Derkaoui, J.E.; Derue, F.; Dervan, P.; Desch, K.; Deviveiros, P.O.; Dewhurst, A.; DeWilde, B.; Dhaliwal, S.; Dhullipudi, R.; Di Ciaccio, A.; Di Ciaccio, L.; Di Domenico, A.; Di Girolamo, A.; Di Girolamo, B.; Di Luise, S.; Di Mattia, A.; Di Nardo, R.; Di Simone, A.; Di Sipio, R.; Diaz, M.A.; Diblen, F.; Diehl, E.B.; Dietrich, J.; Dietzsch, T.A.; Diglio, S.; Dindar Yagci, K.; Dingfelder, J.; Dionisi, C.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djilkibaev, R.; Djobava, T.; do Vale, M.A.B.; Do Valle Wemans, A.; Doan, T.K.O.; Dobos, D.; Dobson, E.; Dobson, M.; Doglioni, C.; Doherty, T.; Dolejsi, J.; Dolenc, I.; Dolezal, Z.; Dolgoshein, B.A.; Dohmae, T.; Donega, M.; Donini, J.; Dopke, J.; Doria, A.; Dos Anjos, A.; Dotti, A.; Dova, M.T.; Doxiadis, A.; Doyle, A.T.; Drasal, Z.; Dris, M.; Dubbert, J.; Duchovni, E.; Duckeck, G.; Dudarev, A.; Dudziak, F.; Duhrssen, M.; Duflot, L.; Dufour, M-A.; Dunford, M.; Duran Yildiz, H.; Dushkin, A.; Duxfield, R.; Dwuznik, M.; Duren, M.; Ebenstein, W.L.; Ebke, J.; Eckweiler, S.; Edmonds, K.; Edwards, C.A.; Egorov, K.; Ehrenfeld, W.; Ehrich, T.; Eifert, T.; Eigen, G.; Einsweiler, K.; Eisenhandler, E.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Ellis, K.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Emeliyanov, D.; Engelmann, R.; Engl, A.; Epp, B.; Eppig, A.; Erdmann, J.; Ereditato, A.; Eriksson, D.; Ermoline, I.; Ernst, J.; Ernst, M.; Ernwein, J.; Errede, D.; Errede, S.; Ertel, E.; Escalier, M.; Escobar, C.; Espinal Curull, X.; Esposito, B.; Etienvre, A.I.; Etzion, E.; Evans, H.; Fabbri, L.; Fabre, C.; Facius, K.; Fakhrutdinov, R.M.; Falciano, S.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farley, J.; Farooque, T.; Farrington, S.M.; Farthouat, P.; Fassnacht, P.; Fassouliotis, D.; Fatholahzadeh, B.; Fayard, L.; Fayette, F.; Febbraro, R.; Federic, P.; Fedin, O.L.; Fedorko, W.; Feligioni, L.; Felzmann, C.U.; Feng, C.; Feng, E.J.; Fenyuk, A.B.; Ferencei, J.; Ferland, J.; Fernandes, B.; Fernando, W.; Ferrag, S.; Ferrando, J.; Ferrara, V.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferrer, A.; Ferrer, M.L.; Ferrere, D.; Ferretti, C.; Fiascaris, M.; Fiedler, F.; Filipcic, A.; Filippas, A.; Filthaut, F.; Fincke-Keeler, M.; Fiolhais, M.C.N.; Fiorini, L.; Firan, A.; Fischer, G.; Fisher, M.J.; Flechl, M.; Fleck, I.; Fleckner, J.; Fleischmann, P.; Fleischmann, S.; Flick, T.; Flores Castillo, L.R.; Flowerdew, M.J.; Fonseca Martin, T.; Formica, A.; Forti, A.; Fortin, D.; Fournier, D.; Fowler, A.J.; Fowler, K.; Fox, H.; Francavilla, P.; Franchino, S.; Francis, D.; Franklin, M.; Franz, S.; Fraternali, M.; Fratina, S.; Freestone, J.; French, S.T.; Froeschl, R.; Froidevaux, D.; Frost, J.A.; Fukunaga, C.; Fullana Torregrosa, E.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gadfort, T.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Gallas, E.J.; Gallo, V.; Gallop, B.J.; Gallus, P.; Galyaev, E.; Gan, K.K.; Gao, Y.S.; Gaponenko, A.; Garcia-Sciveres, M.; Garcia, C.; Garcia Navarro, J.E.; Gardner, R.W.; Garelli, N.; Garitaonandia, H.; Garonne, V.; Gatti, C.; Gaudio, G.; Gautard, V.; Gauzzi, P.; Gavrilenko, I.L.; Gay, C.; Gaycken, G.; Gazis, E.N.; Ge, P.; Gee, C.N.P.; Geich-Gimbel, Ch.; Gellerstedt, K.; Gemme, C.; Genest, M.H.; Gentile, S.; Georgatos, F.; George, S.; Gershon, A.; Ghazlane, H.; Ghodbane, N.; Giacobbe, B.; Giagu, S.; Giakoumopoulou, V.; Giangiobbe, V.; Gianotti, F.; Gibbard, B.; Gibson, A.; Gibson, S.M.; Gilbert, L.M.; Gilchriese, M.; Gilewsky, V.; Gingrich, D.M.; Ginzburg, J.; Giokaris, N.; Giordani, M.P.; Giordano, R.; Giorgi, F.M.; Giovannini, P.; Giraud, P.F.; Girtler, P.; Giugni, D.; Giusti, P.; Gjelsten, B.K.; Gladilin, L.K.; Glasman, C.; Glazov, A.; Glitza, K.W.; Glonti, G.L.; Godfrey, J.; Godlewski, J.; Goebel, M.; Gopfert, T.; Goeringer, C.; Gossling, C.; Gottfert, T.; Goggi, V.; Goldfarb, S.; Goldin, D.; Golling, T.; Gomes, A.; Gomez Fajardo, L.S.; Goncalo, R.; Gonella, L.; Gong, C.; Gonzalez de la Hoz, S.; Gonzalez Silva, M.L.; Gonzalez-Sevilla, S.; Goodson, J.J.; Goossens, L.; Gordon, H.A.; Gorelov, I.; Gorfine, G.; Gorini, B.; Gorini, E.; Gorisek, A.; Gornicki, E.; Gosdzik, B.; Gosselink, M.; Gostkin, M.I.; Gough Eschrich, I.; Gouighri, M.; Goujdami, D.; Goulette, M.P.; Goussiou, A.G.; Goy, C.; Grabowska-Bold, I.; Grafstrom, P.; Grahn, K-J.; Grancagnolo, S.; Grassi, V.; Gratchev, V.; Grau, N.; Gray, H.M.; Gray, J.A.; Graziani, E.; Green, B.; Greenshaw, T.; Greenwood, Z.D.; Gregor, I.M.; Grenier, P.; Griesmayer, E.; Griffiths, J.; Grigalashvili, N.; Grillo, A.A.; Grimm, K.; Grinstein, S.; Grishkevich, Y.V.; Groh, M.; Groll, M.; Gross, E.; Grosse-Knetter, J.; Groth-Jensen, J.; Grybel, K.; Guicheney, C.; Guida, A.; Guillemin, T.; Guler, H.; Gunther, J.; Guo, B.; Gupta, A.; Gusakov, Y.; Gutierrez, A.; Gutierrez, P.; Guttman, N.; Gutzwiller, O.; Guyot, C.; Gwenlan, C.; Gwilliam, C.B.; Haas, A.; Haas, S.; Haber, C.; Hadavand, H.K.; Hadley, D.R.; Haefner, P.; Hartel, R.; Hajduk, Z.; Hakobyan, H.; Haller, J.; Hamacher, K.; Hamilton, A.; Hamilton, S.; Han, L.; Hanagaki, K.; Hance, M.; Handel, C.; Hanke, P.; Hansen, J.R.; Hansen, J.B.; Hansen, J.D.; Hansen, P.H.; Hansl-Kozanecka, T.; Hansson, P.; Hara, K.; Hare, G.A.; Harenberg, T.; Harrington, R.D.; Harris, O.M.; Harrison, K; Hartert, J.; Hartjes, F.; Harvey, A.; Hasegawa, S.; Hasegawa, Y.; Hashemi, K.; Hassani, S.; Haug, S.; Hauschild, M.; Hauser, R.; Havranek, M.; Hawkes, C.M.; Hawkings, R.J.; Hayakawa, T.; Hayward, H.S.; Haywood, S.J.; Head, S.J.; Hedberg, V.; Heelan, L.; Heim, S.; Heinemann, B.; Heisterkamp, S.; Helary, L.; Heller, M.; Hellman, S.; Helsens, C.; Hemperek, T.; Henderson, R.C.W.; Henke, M.; Henrichs, A.; Henriques Correia, A.M.; Henrot-Versille, S.; Hensel, C.; Henss, T.; Hernandez Jimenez, Y.; Hershenhorn, A.D.; Herten, G.; Hertenberger, R.; Hervas, L.; Hessey, N.P.; Higon-Rodriguez, E.; Hill, J.C.; Hiller, K.H.; Hillert, S.; Hillier, S.J.; Hinchliffe, I.; Hines, E.; Hirose, M.; Hirsch, F.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M.C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M.R.; Hoffman, J.; Hoffmann, D.; Hohlfeld, M.; Holy, T.; Holzbauer, J.L.; Homma, Y.; Horazdovsky, T.; Hori, T.; Horn, C.; Horner, S.; Horvat, S.; Hostachy, J-Y.; Hou, S.; Hoummada, A.; Howe, T.; Hrivnac, J.; Hryn'ova, T.; Hsu, P.J.; Hsu, S.C.; Huang, G.S.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Hughes, E.W.; Hughes, G.; Hurwitz, M.; Husemann, U.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibragimov, I.; Iconomidou-Fayard, L.; Idarraga, J.; Iengo, P.; Igonkina, O.; Ikegami, Y.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Ince, T.; Ioannou, P.; Iodice, M.; Irles Quiles, A.; Ishikawa, A.; Ishino, M.; Ishmukhametov, R.; Isobe, T.; Issakov, V.; Issever, C.; Istin, S.; Itoh, Y.; Ivashin, A.V.; Iwanski, W.; Iwasaki, H.; Izen, J.M.; Izzo, V.; Jackson, B.; Jackson, J.N.; Jackson, P.; Jaekel, M.R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakubek, J.; Jana, D.K.; Jansen, E.; Jantsch, A.; Janus, M.; Jared, R.C.; Jarlskog, G.; Jeanty, L.; Jen-La Plante, I.; Jenni, P.; Jez, P.; Jezequel, S.; Ji, W.; Jia, J.; Jiang, Y.; Jimenez Belenguer, M.; Jin, S.; Jinnouchi, O.; Joffe, D.; Johansen, M.; Johansson, K.E.; Johansson, P.; Johnert, S; Johns, K.A.; Jon-And, K.; Jones, G.; Jones, R.W.L.; Jones, T.J.; Jorge, P.M.; Joseph, J.; Juranek, V.; Jussel, P.; Kabachenko, V.V.; Kaci, M.; Kaczmarska, A.; Kado, M.; Kagan, H.; Kagan, M.; Kaiser, S.; Kajomovitz, E.; Kalinin, S.; Kalinovskaya, L.V.; Kalinowski, A.; Kama, S.; Kanaya, N.; Kaneda, M.; Kantserov, V.A.; Kanzaki, J.; Kaplan, B.; Kapliy, A.; Kaplon, J.; Kar, D.; Karagounis, M.; Karagoz Unel, M.; Kartvelishvili, V.; Karyukhin, A.N.; Kashif, L.; Kasmi, A.; Kass, R.D.; Kastanas, A.; Kastoryano, M.; Kataoka, M.; Kataoka, Y.; Katsoufis, E.; Katzy, J.; Kaushik, V.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kayl, M.S.; Kayumov, F.; Kazanin, V.A.; Kazarinov, M.Y.; Keates, J.R.; Keeler, R.; Keener, P.T.; Kehoe, R.; Keil, M.; Kekelidze, G.D.; Kelly, M.; Kenyon, M.; Kepka, O.; Kerschen, N.; Kersevan, B.P.; Kersten, S.; Kessoku, K.; Khakzad, M.; Khalil-zada, F.; Khandanyan, H.; Khanov, A.; Kharchenko, D.; Khodinov, A.; Khomich, A.; Khoriauli, G.; Khovanskiy, N.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kim, H.; Kim, M.S.; Kim, P.C.; Kim, S.H.; Kind, O.; Kind, P.; King, B.T.; Kirk, J.; Kirsch, G.P.; Kirsch, L.E.; Kiryunin, A.E.; Kisielewska, D.; Kittelmann, T.; Kiyamura, H.; Kladiva, E.; Klein, M.; Klein, U.; Kleinknecht, K.; Klemetti, M.; Klier, A.; Klimentov, A.; Klingenberg, R.; Klinkby, E.B.; Klioutchnikova, T.; Klok, P.F.; Klous, S.; Kluge, E.E.; Kluge, T.; Kluit, P.; Klute, M.; Kluth, S.; Knecht, N.S.; Kneringer, E.; Ko, B.R.; Kobayashi, T.; Kobel, M.; Koblitz, B.; Kocian, M.; Kocnar, A.; Kodys, P.; Koneke, K.; Konig, A.C.; Koenig, S.; Kopke, L.; Koetsveld, F.; Koevesarki, P.; Koffas, T.; Koffeman, E.; Kohn, F.; Kohout, Z.; Kohriki, T.; Kolanoski, H.; Kolesnikov, V.; Koletsou, I.; Koll, J.; Kollar, D.; Kolos, S.; Kolya, S.D.; Komar, A.A.; Komaragiri, J.R.; Kondo, T.; Kono, T.; Konoplich, R.; Konovalov, S.P.; Konstantinidis, N.; Koperny, S.; Korcyl, K.; Kordas, K.; Korn, A.; Korolkov, I.; Korolkova, E.V.; Korotkov, V.A.; Kortner, O.; Kostka, P.; Kostyukhin, V.V.; Kotov, S.; Kotov, V.M.; Kotov, K.Y.; Kourkoumelis, C.; Koutsman, A.; Kowalewski, R.; Kowalski, H.; Kowalski, T.Z.; Kozanecki, W.; Kozhin, A.S.; Kral, V.; Kramarenko, V.A.; Kramberger, G.; Krasny, M.W.; Krasznahorkay, A.; Kreisel, A.; Krejci, F.; Kretzschmar, J.; Krieger, N.; Krieger, P.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Kruger, H.; Krumshteyn, Z.V.; Kubota, T.; Kuehn, S.; Kugel, A.; Kuhl, T.; Kuhn, D.; Kukhtin, V.; Kulchitsky, Y.; Kuleshov, S.; Kummer, C.; Kuna, M.; Kunkle, J.; Kupco, A.; Kurashige, H.; Kurata, M.; Kurchaninov, L.L.; Kurochkin, Y.A.; Kus, V.; Kwee, R.; La Rotonda, L.; Labbe, J.; Lacasta, C.; Lacava, F.; Lacker, H.; Lacour, D.; Lacuesta, V.R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Lamanna, M.; Lampen, C.L.; Lampl, W.; Lancon, E.; Landgraf, U.; Landon, M.P.J.; Lane, J.L.; Lankford, A.J.; Lanni, F.; Lantzsch, K.; Lanza, A.; Laplace, S.; Lapoire, C.; Laporte, J.F.; Lari, T.; Larner, A.; Lassnig, M.; Laurelli, P.; Lavrijsen, W.; Laycock, P.; Lazarev, A.B.; Lazzaro, A.; Le Dortz, O.; Le Guirriec, E.; Le Menedeu, E.; Le Vine, M.; Lebedev, A.; Lebel, C.; LeCompte, T.; Ledroit-Guillon, F.; Lee, H.; Lee, J.S.H.; Lee, S.C.; Lefebvre, M.; Legendre, M.; LeGeyt, B.C.; Legger, F.; Leggett, C.; Lehmacher, M.; Lehmann Miotto, G.; Lei, X.; Leitner, R.; Lellouch, D.; Lellouch, J.; Lendermann, V.; Leney, K.J.C.; Lenz, T.; Lenzen, G.; Lenzi, B.; Leonhardt, K.; Leroy, C.; Lessard, J-R.; Lester, C.G.; Leung Fook Cheong, A.; Leveque, J.; Levin, D.; Levinson, L.J.; Leyton, M.; Li, H.; Li, S.; Li, X.; Liang, Z.; Liang, Z.; Liberti, B.; Lichard, P.; Lichtnecker, M.; Lie, K.; Liebig, W.; Lilley, J.N.; Lim, H.; Limosani, A.; Limper, M.; Lin, S.C.; Linnemann, J.T.; Lipeles, E.; Lipinsky, L.; Lipniacka, A.; Liss, T.M.; Lissauer, D.; Lister, A.; Litke, A.M.; Liu, C.; Liu, D.; Liu, H.; Liu, J.B.; Liu, M.; Liu, T.; Liu, Y.; Livan, M.; Lleres, A.; Lloyd, S.L.; Lobodzinska, E.; Loch, P.; Lockman, W.S.; Lockwitz, S.; Loddenkoetter, T.; Loebinger, F.K.; Loginov, A.; Loh, C.W.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Long, R.E.; Lopes, L.; Lopez Mateos, D.; Losada, M.; Loscutoff, P.; Lou, X.; Lounis, A.; Loureiro, K.F.; Lovas, L.; Love, J.; Love, P.A.; Lowe, A.J.; Lu, F.; Lubatti, H.J.; Luci, C.; Lucotte, A.; Ludwig, A.; Ludwig, D.; Ludwig, I.; Luehring, F.; Luisa, L.; Lumb, D.; Luminari, L.; Lund, E.; Lund-Jensen, B.; Lundberg, B.; Lundberg, J.; Lundquist, J.; Lynn, D.; Lys, J.; Lytken, E.; Ma, H.; Ma, L.L.; Macana Goia, J.A.; Maccarrone, G.; Macchiolo, A.; Macek, B.; Machado Miguens, J.; Mackeprang, R.; Madaras, R.J.; Mader, W.F.; Maenner, R.; Maeno, T.; Mattig, P.; Mattig, S.; Magalhaes Martins, P.J.; Magradze, E.; Mahalalel, Y.; Mahboubi, K.; Mahmood, A.; Maiani, C.; Maidantchik, C.; Maio, A.; Majewski, S.; Makida, Y.; Makouski, M.; Makovec, N.; Malecki, Pa.; Malecki, P.; Maleev, V.P.; Malek, F.; Mallik, U.; Malon, D.; Maltezos, S.; Malyshev, V.; Malyukov, S.; Mambelli, M.; Mameghani, R.; Mamuzic, J.; Mandelli, L.; Mandic, I.; Mandrysch, R.; Maneira, J.; Mangeard, P.S.; Manjavidze, I.D.; Manning, P.M.; Manousakis-Katsikakis, A.; Mansoulie, B.; Mapelli, A.; Mapelli, L.; March, L.; Marchand, J.F.; Marchese, F.; Marchiori, G.; Marcisovsky, M.; Marino, C.P.; Marroquim, F.; Marshall, Z.; Marti-Garcia, S.; Martin, A.J.; Martin, A.J.; Martin, B.; Martin, B.; Martin, F.F.; Martin, J.P.; Martin, T.A.; Martin dit Latour, B.; Martinez, M.; Martinez Outschoorn, V.; Martini, A.; Martyniuk, A.C.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A.L.; Massa, I.; Massol, N.; Mastroberardino, A.; Masubuchi, T.; Matricon, P.; Matsunaga, H.; Matsushita, T.; Mattravers, C.; Maxfield, S.J.; Mayne, A.; Mazini, R.; Mazur, M.; Mazzanti, M.; Mc Donald, J.; Mc Kee, S.P.; McCarn, A.; McCarthy, R.L.; McCubbin, N.A.; McFarlane, K.W.; McGlone, H.; Mchedlidze, G.; McMahon, S.J.; McPherson, R.A.; Meade, A.; Mechnich, J.; Mechtel, M.; Medinnis, M.; Meera-Lebbai, R.; Meguro, T.M.; Mehlhase, S.; Mehta, A.; Meier, K.; Meirose, B.; Melachrinos, C.; Mellado Garcia, B.R.; Mendoza Navas, L.; Meng, Z.; Menke, S.; Meoni, E.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F.S.; Messina, A.M.; Metcalfe, J.; Mete, A.S.; Meyer, J-P.; Meyer, J.; Meyer, J.; Meyer, T.C.; Meyer, W.T.; Miao, J.; Michal, S.; Micu, L.; Middleton, R.P.; Migas, S.; Mijovic, L.; Mikenberg, G.; Mikestikova, M.; Mikuz, M.; Miller, D.W.; Mills, W.J.; Mills, C.M.; Milov, A.; Milstead, D.A.; Milstein, D.; Minaenko, A.A.; Minano, M.; Minashvili, I.A.; Mincer, A.I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L.M.; Mirabelli, G.; Misawa, S.; Miscetti, S.; Misiejuk, A.; Mitrevski, J.; Mitsou, V.A.; Miyagawa, P.S.; Mjornmark, J.U.; Mladenov, D.; Moa, T.; Moed, S.; Moeller, V.; Monig, K.; Moser, N.; Mohr, W.; Mohrdieck-Mock, S.; Moles-Valls, R.; Molina-Perez, J.; Monk, J.; Monnier, E.; Montesano, S.; Monticelli, F.; Moore, R.W.; Mora Herrera, C.; Moraes, A.; Morais, A.; Morel, J.; Morello, G.; Moreno, D.; Moreno Llacer, M.; Morettini, P.; Morii, M.; Morley, A.K.; Mornacchi, G.; Morozov, S.V.; Morris, J.D.; Moser, H.G.; Mosidze, M.; Moss, J.; Mount, R.; Mountricha, E.; Mouraviev, S.V.; Moyse, E.J.W.; Mudrinic, M.; Mueller, F.; Mueller, J.; Mueller, K.; Muller, T.A.; Muenstermann, D.; Muir, A.; Munwes, Y.; Murillo Garcia, R.; Murray, W.J.; Mussche, I.; Musto, E.; Myagkov, A.G.; Myska, M.; Nadal, J.; Nagai, K.; Nagano, K.; Nagasaka, Y.; Nairz, A.M.; Nakamura, K.; Nakano, I.; Nakatsuka, H.; Nanava, G.; Napier, A.; Nash, M.; Nation, N.R.; Nattermann, T.; Naumann, T.; Navarro, G.; Nderitu, S.K.; Neal, H.A.; Nebot, E.; Nechaeva, P.; Negri, A.; Negri, G.; Nelson, A.; Nelson, T.K.; Nemecek, S.; Nemethy, P.; Nepomuceno, A.A.; Nessi, M.; Neubauer, M.S.; Neusiedl, A.; Neves, R.N.; Nevski, P.; Newcomer, F.M.; Nickerson, R.B.; Nicolaidou, R.; Nicolas, L.; Nicoletti, G.; Nicquevert, B.; Niedercorn, F.; Nielsen, J.; Nikiforov, A.; Nikolaev, K.; Nikolic-Audit, I.; Nikolopoulos, K.; Nilsen, H.; Nilsson, P.; Nisati, A.; Nishiyama, T.; Nisius, R.; Nodulman, L.; Nomachi, M.; Nomidis, I.; Nordberg, M.; Nordkvist, B.; Notz, D.; Novakova, J.; Nozaki, M.; Nozicka, M.; Nugent, I.M.; Nuncio-Quiroz, A.E.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; O'Neil, D.C.; O'Shea, V.; Oakham, F.G.; Oberlack, H.; Ochi, A.; Oda, S.; Odaka, S.; Odier, J.; Ogren, H.; Oh, A.; Oh, S.H.; Ohm, C.C.; Ohshima, T.; Ohshita, H.; Ohsugi, T.; Okada, S.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olchevski, A.G.; Oliveira, M.; Oliveira Damazio, D.; Oliver, J.; Oliver Garcia, E.; Olivito, D.; Olszewski, A.; Olszowska, J.; Omachi, C.; Onofre, A.; Onyisi, P.U.E.; Oram, C.J.; Oreglia, M.J.; Oren, Y.; Orestano, D.; Orlov, I.; Oropeza Barrera, C.; Orr, R.S.; Ortega, E.O.; Osculati, B.; Ospanov, R.; Osuna, C.; Ottersbach, J.P; Ould-Saada, F.; Ouraou, A.; Ouyang, Q.; Owen, M.; Owen, S.; Oyarzun, A; Ozcan, V.E.; Ozone, K.; Ozturk, N.; Pacheco Pages, A.; Padilla Aranda, C.; Paganis, E.; Pahl, C.; Paige, F.; Pajchel, K.; Palestini, S.; Pallin, D.; Palma, A.; Palmer, J.D.; Pan, Y.B.; Panagiotopoulou, E.; Panes, B.; Panikashvili, N.; Panitkin, S.; Pantea, D.; Panuskova, M.; Paolone, V.; Papadopoulou, Th.D.; Park, S.J.; Park, W.; Parker, M.A.; Parker, S.I.; Parodi, F.; Parsons, J.A.; Parzefall, U.; Pasqualucci, E.; Passeri, A.; Pastore, F.; Pastore, Fr.; Pasztor, G.; Pataraia, S.; Pater, J.R.; Patricelli, S.; Patwa, A.; Pauly, T.; Peak, L.S.; Pecsy, M.; Pedraza Morales, M.I.; Peleganchuk, S.V.; Peng, H.; Penson, A.; Penwell, J.; Perantoni, M.; Perez, K.; Perez Codina, E.; Perez Garcia-Estan, M.T.; Perez Reale, V.; Perini, L.; Pernegger, H.; Perrino, R.; Persembe, S.; Perus, P.; Peshekhonov, V.D.; Petersen, B.A.; Petersen, T.C.; Petit, E.; Petridou, C.; Petrolo, E.; Petrucci, F.; Petschull, D; Petteni, M.; Pezoa, R.; Phan, A.; Phillips, A.W.; Piacquadio, G.; Piccinini, M.; Piegaia, R.; Pilcher, J.E.; Pilkington, A.D.; Pina, J.; Pinamonti, M.; Pinfold, J.L.; Pinto, B.; Pizio, C.; Placakyte, R.; Plamondon, M.; Pleier, M.A.; Poblaguev, A.; Poddar, S.; Podlyski, F.; Poffenberger, P.; Poggioli, L.; Pohl, M.; Polci, F.; Polesello, G.; Policicchio, A.; Polini, A.; Poll, J.; Polychronakos, V.; Pomeroy, D.; Pommes, K.; Ponsot, P.; Pontecorvo, L.; Pope, B.G.; Popeneciu, G.A.; Popovic, D.S.; Poppleton, A.; Popule, J.; Portell Bueso, X.; Porter, R.; Pospelov, G.E.; Pospisil, S.; Potekhin, M.; Potrap, I.N.; Potter, C.J.; Potter, C.T.; Potter, K.P.; Poulard, G.; Poveda, J.; Prabhu, R.; Pralavorio, P.; Prasad, S.; Pravahan, R.; Pribyl, L.; Price, D.; Price, L.E.; Prichard, P.M.; Prieur, D.; Primavera, M.; Prokofiev, K.; Prokoshin, F.; Protopopescu, S.; Proudfoot, J.; Prudent, X.; Przysiezniak, H.; Psoroulas, S.; Ptacek, E.; Puigdengoles, C.; Purdham, J.; Purohit, M.; Puzo, P.; Pylypchenko, Y.; Qi, M.; Qian, J.; Qian, W.; Qin, Z.; Quadt, A.; Quarrie, D.R.; Quayle, W.B.; Quinonez, F.; Raas, M.; Radeka, V.; Radescu, V.; Radics, B.; Rador, T.; Ragusa, F.; Rahal, G.; Rahimi, A.M.; Rajagopalan, S.; Rammensee, M.; Rammes, M.; Rauscher, F.; Rauter, E.; Raymond, M.; Read, A.L.; Rebuzzi, D.M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Reinherz-Aronis, E.; Reinsch, A; Reisinger, I.; Reljic, D.; Rembser, C.; Ren, Z.L.; Renkel, P.; Rescia, S.; Rescigno, M.; Resconi, S.; Resende, B.; Reznicek, P.; Rezvani, R.; Richards, A.; Richards, R.A.; Richter, R.; Richter-Was, E.; Ridel, M.; Rijpstra, M.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Rios, R.R.; Riu, I.; Rizatdinova, F.; Rizvi, E.; Roa Romero, D.A.; Robertson, S.H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, JEM; Robinson, M.; Robson, A.; Rocha de Lima, J.G.; Roda, C.; Roda Dos Santos, D.; Rodriguez, D.; Rodriguez Garcia, Y.; Roe, S.; Rohne, O.; Rojo, V.; Rolli, S.; Romaniouk, A.; Romanov, V.M.; Romeo, G.; Romero Maltrana, D.; Roos, L.; Ros, E.; Rosati, S.; Rosenbaum, G.A.; Rosselet, L.; Rossetti, V.; Rossi, L.P.; Rotaru, M.; Rothberg, J.; Rousseau, D.; Royon, C.R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Ruckert, B.; Ruckstuhl, N.; Rud, V.I.; Rudolph, G.; Ruhr, F.; Ruggieri, F.; Ruiz-Martinez, A.; Rumyantsev, L.; Rurikova, Z.; Rusakovich, N.A.; Rutherfoord, J.P.; Ruwiedel, C.; Ruzicka, P.; Ryabov, Y.F.; Ryan, P.; Rybkin, G.; Rzaeva, S.; Saavedra, A.F.; Sadrozinski, H.F-W.; Sadykov, R.; Sakamoto, H.; Salamanna, G.; Salamon, A.; Saleem, M.S.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvachua Ferrando, B.M.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sampsonidis, D.; Samset, B.H.; Sandaker, H.; Sander, H.G.; Sanders, M.P.; Sandhoff, M.; Sandhu, P.; Sandstroem, R.; Sandvoss, S.; Sankey, D.P.C.; Sanny, B.; Sansoni, A.; Santamarina Rios, C.; Santoni, C.; Santonico, R.; Saraiva, J.G.; Sarangi, T.; Sarkisyan-Grinbaum, E.; Sarri, F.; Sasaki, O.; Sasao, N.; Satsounkevitch, I.; Sauvage, G.; Savard, P.; Savine, A.Y.; Savinov, V.; Sawyer, L.; Saxon, D.H.; Says, L.P.; Sbarra, C.; Sbrizzi, A.; Scannicchio, D.A.; Schaarschmidt, J.; Schacht, P.; Schafer, U.; Schaetzel, S.; Schaffer, A.C.; Schaile, D.; Schamberger, R.D.; Schamov, A.G.; Schegelsky, V.A.; Scheirich, D.; Schernau, M.; Scherzer, M.I.; Schiavi, C.; Schieck, J.; Schioppa, M.; Schlenker, S.; Schmidt, E.; Schmieden, K.; Schmitt, C.; Schmitz, M.; Schott, M.; Schouten, D.; Schovancova, J.; Schram, M.; Schreiner, A.; Schroeder, C.; Schroer, N.; Schroers, M.; Schultes, J.; Schultz-Coulon, H.C.; Schumacher, J.W.; Schumacher, M.; Schumm, B.A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwemling, Ph.; Schwienhorst, R.; Schwierz, R.; Schwindling, J.; Scott, W.G.; Searcy, J.; Sedykh, E.; Segura, E.; Seidel, S.C.; Seiden, A.; Seifert, F.; Seixas, J.M.; Sekhniaidze, G.; Seliverstov, D.M.; Sellden, B.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Seuster, R.; Severini, H.; Sevior, M.E.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L.Y.; Shank, J.T.; Shao, Q.T.; Shapiro, M.; Shatalov, P.B.; Shaw, K.; Sherman, D.; Sherwood, P.; Shibata, A.; Shimojima, M.; Shin, T.; Shmeleva, A.; Shochet, M.J.; Shupe, M.A.; Sicho, P.; Sidoti, A.; Siegert, F; Siegrist, J.; Sijacki, Dj.; Silbert, O.; Silva, J.; Silver, Y.; Silverstein, D.; Silverstein, S.B.; Simak, V.; Simic, Lj.; Simion, S.; Simmons, B.; Simonyan, M.; Sinervo, P.; Sinev, N.B.; Sipica, V.; Siragusa, G.; Sisakyan, A.N.; Sivoklokov, S.Yu.; Sjoelin, J.; Sjursen, T.B.; Skovpen, K.; Skubic, P.; Slater, M.; Slavicek, T.; Sliwa, K.; Sloper, J.; Sluka, T.; Smakhtin, V.; Smirnov, S.Yu.; Smirnov, Y.; Smirnova, L.N.; Smirnova, O.; Smith, B.C.; Smith, D.; Smith, K.M.; Smizanska, M.; Smolek, K.; Snesarev, A.A.; Snow, S.W.; Snow, J.; Snuverink, J.; Snyder, S.; Soares, M.; Sobie, R.; Sodomka, J.; Soffer, A.; Solans, C.A.; Solar, M.; Solc, J.; Solfaroli Camillocci, E.; Solodkov, A.A.; Solovyanov, O.V.; Soluk, R.; Sondericker, J.; Sopko, V.; Sopko, B.; Sosebee, M.; Soukharev, A.; Spagnolo, S.; Spano, F.; Spencer, E.; Spighi, R.; Spigo, G.; Spila, F.; Spiwoks, R.; Spousta, M.; Spreitzer, T.; Spurlock, B.; St. Denis, R.D.; Stahl, T.; Stahlman, J.; Stamen, R.; Stancu, S.N.; Stanecka, E.; Stanek, R.W.; Stanescu, C.; Stapnes, S.; Starchenko, E.A.; Stark, J.; Staroba, P.; Starovoitov, P.; Stastny, J.; Stavina, P.; Steele, G.; Steinbach, P.; Steinberg, P.; Stekl, I.; Stelzer, B.; Stelzer, H.J.; Stelzer-Chilton, O.; Stenzel, H.; Stevenson, K.; Stewart, G.A.; Stockton, M.C.; Stoerig, K.; Stoicea, G.; Stonjek, S.; Strachota, P.; Stradling, A.R.; Straessner, A.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strauss, M.; Strizenec, P.; Strohmer, R.; Strom, D.M.; Stroynowski, R.; Strube, J.; Stugu, B.; Soh, D.A.; Su, D.; Sugaya, Y.; Sugimoto, T.; Suhr, C.; Suk, M.; Sulin, V.V.; Sultansoy, S.; Sumida, T.; Sun, X.H.; Sundermann, J.E.; Suruliz, K.; Sushkov, S.; Susinno, G.; Sutton, M.R.; Suzuki, T.; Suzuki, Y.; Sykora, I.; Sykora, T.; Szymocha, T.; Sanchez, J.; Ta, D.; Tackmann, K.; Taffard, A.; Tafirout, R.; Taga, A.; Takahashi, Y.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Talby, M.; Talyshev, A.; Tamsett, M.C.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tanaka, S.; Tapprogge, S.; Tardif, D.; Tarem, S.; Tarrade, F.; Tartarelli, G.F.; Tas, P.; Tasevsky, M.; Tassi, E.; Tatarkhanov, M.; Taylor, C.; Taylor, F.E.; Taylor, G.N.; Taylor, R.P.; Taylor, W.; Teixeira-Dias, P.; Ten Kate, H.; Teng, P.K.; Tennenbaum-Katan, Y.D.; Terada, S.; Terashi, K.; Terron, J.; Terwort, M.; Testa, M.; Teuscher, R.J.; Thioye, M.; Thoma, S.; Thomas, J.P.; Thompson, E.N.; Thompson, P.D.; Thompson, P.D.; Thompson, R.J.; Thompson, A.S.; Thomson, E.; Thun, R.P.; Tic, T.; Tikhomirov, V.O.; Tikhonov, Y.A.; Tipton, P.; Tique Aires Viegas, F.J.; Tisserant, S.; Toczek, B.; Todorov, T.; Todorova-Nova, S.; Toggerson, B.; Tojo, J.; Tokar, S.; Tokushuku, K.; Tollefson, K.; Tomasek, L.; Tomasek, M.; Tomoto, M.; Tompkins, L.; Toms, K.; Tonoyan, A.; Topfel, C.; Topilin, N.D.; Torrence, E.; Torro Pastor, E.; Toth, J.; Touchard, F.; Tovey, D.R.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I.M.; Trincaz-Duvoid, S.; Trinh, T.N.; Tripiana, M.F.; Triplett, N.; Trischuk, W.; Trivedi, A.; Trocme, B.; Troncon, C.; Trzupek, A.; Tsarouchas, C.; Tseng, J.C-L.; Tsiakiris, M.; Tsiareshka, P.V.; Tsionou, D.; Tsipolitis, G.; Tsiskaridze, V.; Tskhadadze, E.G.; Tsukerman, I.I.; Tsulaia, V.; Tsung, J.W.; Tsuno, S.; Tsybychev, D.; Tuggle, J.M.; Turecek, D.; Turk Cakir, I.; Turlay, E.; Tuts, P.M.; Twomey, M.S.; Tylmad, M.; Tyndel, M.; Uchida, K.; Ueda, I.; Ugland, M.; Uhlenbrock, M.; Uhrmacher, M.; Ukegawa, F.; Unal, G.; Undrus, A.; Unel, G.; Unno, Y.; Urbaniec, D.; Urkovsky, E.; Urquijo, P.; Urrejola, P.; Usai, G.; Uslenghi, M.; Vacavant, L.; Vacek, V.; Vachon, B.; Vahsen, S.; Valente, P.; Valentinetti, S.; Valkar, S.; Valladolid Gallego, E.; Vallecorsa, S.; Valls Ferrer, J.A.; Van Berg, R.; van der Graaf, H.; van der Kraaij, E.; van der Poel, E.; van der Ster, D.; van Eldik, N.; van Gemmeren, P.; van Kesteren, Z.; van Vulpen, I.; Vandelli, W.; Vaniachine, A.; Vankov, P.; Vannucci, F.; Vari, R.; Varnes, E.W.; Varouchas, D.; Vartapetian, A.; Varvell, K.E.; Vasilyeva, L.; Vassilakopoulos, V.I.; Vazeille, F.; Vellidis, C.; Veloso, F.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J.C.; Vetterli, M.C.; Vichou, I.; Vickey, T.; Viehhauser, G.H.A.; Villa, M.; Villani, E.G.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M.G.; Vinek, E.; Vinogradov, V.B.; Viret, S.; Virzi, J.; Vitale, A.; Vitells, O.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vlasak, M.; Vlasov, N.; Vogel, A.; Vokac, P.; Volpi, M.; von der Schmitt, H.; von Loeben, J.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorwerk, V.; Vos, M.; Voss, R.; Voss, T.T.; Vossebeld, J.H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vu Anh, T.; Vudragovic, D.; Vuillermet, R.; Vukotic, I.; Wagner, P.; Walbersloh, J.; Walder, J.; Walker, R.; Walkowiak, W.; Wall, R.; Wang, C.; Wang, H.; Wang, J.; Wang, S.M.; Warburton, A.; Ward, C.P.; Warsinsky, M.; Wastie, R.; Watkins, P.M.; Watson, A.T.; Watson, M.F.; Watts, G.; Watts, S.; Waugh, A.T.; Waugh, B.M.; Weber, M.D.; Weber, M.; Weber, M.S.; Weber, P.; Weidberg, A.R.; Weingarten, J.; Weiser, C.; Wellenstein, H.; Wells, P.S.; Wen, M.; Wenaus, T.; Wendler, S.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Werth, M.; Werthenbach, U.; Wessels, M.; Whalen, K.; White, A.; White, M.J.; White, S.; Whitehead, S.R.; Whiteson, D.; Whittington, D.; Wicek, F.; Wicke, D.; Wickens, F.J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik, L.A.M.; Wildauer, A.; Wildt, M.A.; Wilkens, H.G.; Williams, E.; Williams, H.H.; Willocq, S.; Wilson, J.A.; Wilson, M.G.; Wilson, A.; Wingerter-Seez, I.; Winklmeier, F.; Wittgen, M.; Wolter, M.W.; Wolters, H.; Wosiek, B.K.; Wotschack, J.; Woudstra, M.J.; Wraight, K.; Wright, C.; Wright, D.; Wrona, B.; Wu, S.L.; Wu, X.; Wulf, E.; Wynne, B.M.; Xaplanteris, L.; Xella, S.; Xie, S.; Xu, D.; Xu, N.; Yamada, M.; Yamamoto, A.; Yamamoto, K.; Yamamoto, S.; Yamamura, T.; Yamaoka, J.; Yamazaki, T.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, U.K.; Yang, Z.; Yao, W-M.; Yao, Y.; Yasu, Y.; Ye, J.; Ye, S.; Yilmaz, M.; Yoosoofmiya, R.; Yorita, K.; Yoshida, R.; Young, C.; Youssef, S.P.; Yu, D.; Yu, J.; Yuan, L.; Yurkewicz, A.; Zaidan, R.; Zaitsev, A.M.; Zajacova, Z.; Zambrano, V.; Zanello, L.; Zaytsev, A.; Zeitnitz, C.; Zeller, M.; Zemla, A.; Zendler, C.; Zenin, O.; Zenis, T.; Zenonos, Z.; Zenz, S.; Zerwas, D.; Zevi della Porta, G.; Zhan, Z.; Zhang, H.; Zhang, J.; Zhang, Q.; Zhang, X.; Zhao, L.; Zhao, T.; Zhao, Z.; Zhemchugov, A.; Zhong, J.; Zhou, B.; Zhou, N.; Zhou, Y.; Zhu, C.G.; Zhu, H.; Zhu, Y.; Zhuang, X.; Zhuravlov, V.; Zimmermann, R.; Zimmermann, S.; Zimmermann, S.; Ziolkowski, M.; Zivkovic, L.; Zobernig, G.; Zoccoli, A.; zur Nedden, M.; Zutshi, V.

    2010-01-01

    The simulation software for the ATLAS Experiment at the Large Hadron Collider is being used for large-scale production of events on the LHC Computing Grid. This simulation requires many components, from the generators that simulate particle collisions, through packages simulating the response of the various detectors and triggers. All of these components come together under the ATLAS simulation infrastructure. In this paper, that infrastructure is discussed, including that supporting the detector description, interfacing the event generation, and combining the GEANT4 simulation of the response of the individual detectors. Also described are the tools allowing the software validation, performance testing, and the validation of the simulated output against known physics processes.

  4. Error and efficiency of simulated tempering simulations.

    Science.gov (United States)

    Rosta, Edina; Hummer, Gerhard

    2010-01-21

    We derive simple analytical expressions for the error and computational efficiency of simulated tempering (ST) simulations. The theory applies to the important case of systems whose dynamics at long times is dominated by the slow interconversion between two metastable states. An extension to the multistate case is described. We show that the relative gain in efficiency of ST simulations over regular molecular dynamics (MD) or Monte Carlo (MC) simulations is given by the ratio of their reactive fluxes, i.e., the number of transitions between the two states summed over all ST temperatures divided by the number of transitions at the single temperature of the MD or MC simulation. This relation for the efficiency is derived for the limit in which changes in the ST temperature are fast compared to the two-state transitions. In this limit, ST is most efficient. Our expression for the maximum efficiency gain of ST simulations is essentially identical to the corresponding expression derived by us for replica exchange MD and MC simulations [E. Rosta and G. Hummer, J. Chem. Phys. 131, 165102 (2009)] on a different route. We find quantitative agreement between predicted and observed efficiency gains in a test against ST and replica exchange MC simulations of a two-dimensional Ising model. Based on the efficiency formula, we provide recommendations for the optimal choice of ST simulation parameters, in particular, the range and number of temperatures, and the frequency of attempted temperature changes.

  5. Systems Engineering Simulator (SES) Simulator Planning Guide

    Science.gov (United States)

    McFarlane, Michael

    2011-01-01

    The simulation process, milestones and inputs are unknowns to first-time users of the SES. The Simulator Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

  6. LOADING SIMULATION PROGRAM C

    Data.gov (United States)

    U.S. Environmental Protection Agency — LSPC is the Loading Simulation Program in C++, a watershed modeling system that includes streamlined Hydrologic Simulation Program Fortran (HSPF) algorithms for...

  7. USU Patient Simulation Center

    Data.gov (United States)

    Federal Laboratory Consortium — he National Capital Area (NCA) Medical Simulation Center is a state-of-the-art training facility located near the main USU campus. It uses simulated patients (i.e.,...

  8. Design by simulation

    NARCIS (Netherlands)

    Heerkens, Johannes M.G.

    2002-01-01

    Examines the contributions of the Dutch National Aerospace laboratory to the development of simulation research methodology. Issues to consider in the development of measuring instruments; Simulator networking; Use of subjective data to validate research.

  9. GPS Satellite Simulation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The GPS satellite simulation facility consists of a GPS satellite simulator controlled by either a Silicon Graphics Origin 2000 or PC depending upon unit under test...

  10. Eye Disease Simulations

    Science.gov (United States)

    ... USAJobs Home > Eye Health Information > Eye Disease Simulations Eye Disease Simulations Age-Related Macular Degeneration Cataract Diabetic ... information page Back to top Diabetic Retinopathy Diabetic Eye Disease information page Back to top Glaucoma Glaucoma ...

  11. Ride Motion Simulator (RMS)

    Data.gov (United States)

    Federal Laboratory Consortium — The RMS is a simulator designed for crew station and man-in-the-loop experimentation. The simulator immerses users in a synthetic battlefield to experience realistic...

  12. Airflow Simulation Techniques

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    The paper describes the development in airflow simulations in rooms . The research is, as other areas of flow research, influenced by the decreasing cost of computation which seems to indicate an increased use of airflow simulation in the coming years....

  13. Traffic management simulation development.

    Science.gov (United States)

    2011-01-03

    Microscopic simulation can provide significant support to traffic management center (TMC) operations. However, traffic simulation applications require data that are expensive and time-consuming to collect. Data collected by TMCs can be used as a prim...

  14. Discrete Event Simulation

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 1. Discrete Event Simulation. Matthew Jacob ... Keywords. Simulation; modelling; computer programming. Author Affiliations. Matthew Jacob1. Department of Computer Science and Automation, Indian Institute of Science, Bangalore 560 012.

  15. Simulation Interoperability (Interoperabilite de la simulation)

    Science.gov (United States)

    2015-01-01

    relatives aux environnements de simulation distribuée se concentrent principalement sur les niveaux technique, syntaxique et (dans une certaine mesure...l’automatisation relative du développement, de l’intégration et de la mise en œuvre des environnements de simulation distribuée. Cela exige une...normalisation des applicatifs créés pendant le développement d’un environnement de simulation, à la suite, par exemple, du DSEEP. Ces produits normalisés

  16. EMC Simulation and Modeling

    Science.gov (United States)

    Takahashi, Takehiro; Schibuya, Noboru

    The EMC simulation is now widely used in design stage of electronic equipment to reduce electromagnetic noise. As the calculated electromagnetic behaviors of the EMC simulator depends on the inputted EMC model of the equipment, the modeling technique is important to obtain effective results. In this paper, simple outline of the EMC simulator and EMC model are described. Some modeling techniques of EMC simulation are also described with an example of the EMC model which is shield box with aperture.

  17. Distribution system simulator

    Science.gov (United States)

    Bahrami, K. A.; Kirkham, H.; Rahman, S.

    1986-01-01

    In a series of tests performed under the Department of Energy auspices, power line carrier propagation was observed to be anomalous under certain circumstances. To investigate the cause, a distribution system simulator was constructed. The simulator was a physical simulator that accurately represented the distribution system from below power frequency to above 50 kHz. Effects such as phase-to-phase coupling and skin effect were modeled. Construction details of the simulator, and experimental results from its use are presented.

  18. Simulating Supernova Light Curves

    Energy Technology Data Exchange (ETDEWEB)

    Even, Wesley Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dolence, Joshua C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-05

    This report discusses supernova light simulations. A brief review of supernovae, basics of supernova light curves, simulation tools used at LANL, and supernova results are included. Further, it happens that many of the same methods used to generate simulated supernova light curves can also be used to model the emission from fireballs generated by explosions in the earth’s atmosphere.

  19. Simulation and psychology

    DEFF Research Database (Denmark)

    Dieckmann, Peter; Krage, Ralf

    2013-01-01

    Psychology is relevant for improving the use of simulation in anesthesiology, as it allows us to describe, explain and optimize the interactions of learners and instructors as well as the design of simulation scenarios and debriefings. Much psychological expertise is not used for simulation...

  20. Teaching with simulations

    NARCIS (Netherlands)

    Rutten, N.P.G.

    2014-01-01

    This dissertation focuses on whole-class science teaching with computer simulations. Computer simulations display dynamic, visual representations of natural phenomena and can make a great contribution to the science classroom. Simulations can be used in multiple ways. Teachers who have an

  1. Resolution exchange simulation.

    Science.gov (United States)

    Lyman, Edward; Ytreberg, F Marty; Zuckerman, Daniel M

    2006-01-20

    We extend replica-exchange simulation in two ways and apply our approaches to biomolecules. The first generalization permits exchange simulation between models of differing resolution--i.e., between detailed and coarse-grained models. Such "resolution exchange" can be applied to molecular systems or spin systems. The second extension is to "pseudoexchange" simulations, which require little CPU usage for most levels of the exchange ladder and also substantially reduce the need for overlap between levels. Pseudoexchanges can be used in either replica or resolution exchange simulations. We perform efficient, converged simulations of a 50-atom peptide to illustrate the new approaches.

  2. Simulation modeling and arena

    CERN Document Server

    Rossetti, Manuel D

    2015-01-01

    Emphasizes a hands-on approach to learning statistical analysis and model building through the use of comprehensive examples, problems sets, and software applications With a unique blend of theory and applications, Simulation Modeling and Arena®, Second Edition integrates coverage of statistical analysis and model building to emphasize the importance of both topics in simulation. Featuring introductory coverage on how simulation works and why it matters, the Second Edition expands coverage on static simulation and the applications of spreadsheets to perform simulation. The new edition als

  3. NS simulator for beginners

    CERN Document Server

    Altman, Eitan

    2012-01-01

    NS-2 is an open-source discrete event network simulator which is widely used by both the research community as well as by the people involved in the standardization protocols of IETF. The goal of this book is twofold: on one hand to learn how to use the NS-2 simulator, and on the other hand, to become acquainted with and to understand the operation of some of the simulated objects using NS-2 simulations. The book is intended to help students, engineers or researchers who need not have much background in programming or who want to learn through simple examples how to analyse some simulated obje

  4. Parallel Atomistic Simulations

    Energy Technology Data Exchange (ETDEWEB)

    HEFFELFINGER,GRANT S.

    2000-01-18

    Algorithms developed to enable the use of atomistic molecular simulation methods with parallel computers are reviewed. Methods appropriate for bonded as well as non-bonded (and charged) interactions are included. While strategies for obtaining parallel molecular simulations have been developed for the full variety of atomistic simulation methods, molecular dynamics and Monte Carlo have received the most attention. Three main types of parallel molecular dynamics simulations have been developed, the replicated data decomposition, the spatial decomposition, and the force decomposition. For Monte Carlo simulations, parallel algorithms have been developed which can be divided into two categories, those which require a modified Markov chain and those which do not. Parallel algorithms developed for other simulation methods such as Gibbs ensemble Monte Carlo, grand canonical molecular dynamics, and Monte Carlo methods for protein structure determination are also reviewed and issues such as how to measure parallel efficiency, especially in the case of parallel Monte Carlo algorithms with modified Markov chains are discussed.

  5. Discrete-Event Simulation

    Directory of Open Access Journals (Sweden)

    Prateek Sharma

    2015-04-01

    Full Text Available Abstract Simulation can be regarded as the emulation of the behavior of a real-world system over an interval of time. The process of simulation relies upon the generation of the history of a system and then analyzing that history to predict the outcome and improve the working of real systems. Simulations can be of various kinds but the topic of interest here is one of the most important kind of simulation which is Discrete-Event Simulation which models the system as a discrete sequence of events in time. So this paper aims at introducing about Discrete-Event Simulation and analyzing how it is beneficial to the real world systems.

  6. Developing Software Simulations

    Directory of Open Access Journals (Sweden)

    Tom Hall

    2007-06-01

    Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

  7. Multiscale Simulations Using Particles

    DEFF Research Database (Denmark)

    Walther, Jens Honore

    We are developing particle methods as a general framework for large scale simulations of discrete and continuous systems in science and engineering. The specific application and research areas include: discrete element simulations of granular flow, smoothed particle hydrodynamics and particle...... vortex methods for problems in continuum fluid dynamics, dissipative particle dynamics for flow at the meso scale, and atomistic molecular dynamics simulations of nanofluidic systems. We employ multiscale techniques to breach the atomistic and continuum scales to study fundamental problems in fluid...

  8. Packet Tracer network simulator

    CERN Document Server

    Jesin, A

    2014-01-01

    A practical, fast-paced guide that gives you all the information you need to successfully create networks and simulate them using Packet Tracer.Packet Tracer Network Simulator is aimed at students, instructors, and network administrators who wish to use this simulator to learn how to perform networking instead of investing in expensive, specialized hardware. This book assumes that you have a good amount of Cisco networking knowledge, and it will focus more on Packet Tracer rather than networking.

  9. Compact simulator technology

    Energy Technology Data Exchange (ETDEWEB)

    Fray, R.; Divakaruni, M. (Electric Power Research Inst., Palo Alto, CA (United States))

    1992-03-01

    In its work to expand and enhance simulator-based training in the fossil generation industry, EPRI is developing compact simulator technology for training power plant operators. These personal computer-based systems are more flexible and much less expensive than conventional, mainframe-based simulators, and their use can dramatically increase operator effectiveness. The potential benefits for utilities include improved plant performance, availability, life, and environmental compliance and thus significantly lower O and M costs.

  10. Simulation by bondgraphs

    Science.gov (United States)

    Thoma, Jean Ulrich

    The fundamental principles and applications of the bond graph method, in which a system is represented on paper by letter elements and their interconnections (bonds), are presented in an introduction for engineering students. Chapters are devoted to simulation and graphical system models; bond graphs as networks for power and signal exchange; the simulation and design of mechanical engineering systems; the simulation of fluid power systems and hydrostatic devices; electrical circuits, drives, and components; practical procedures and problems of bond-graph-based numerical simulation; and applications to thermodynamics, chemistry, and biology. Also included are worked examples of applications to robotics, shocks and collisions, ac circuits, hydraulics, and a hydropneumatic fatigue-testing machine.

  11. Urban Simulation Environment (Preprint)

    National Research Council Canada - National Science Library

    Stoor, Bradley J; Pruett, Stanley H; Duquette, Matthew M; Subr, Robert C; MtCastle, Tim

    2006-01-01

    .... The simulation environment will include multiple urban databases for visualization, UAV aerodynamics and control models, camera models, articulated human models, and ground vehicle models to serve...

  12. Simulating Price-Taking

    Science.gov (United States)

    Engelhardt, Lucas M.

    2015-01-01

    In this article, the author presents a price-takers' market simulation geared toward principles-level students. This simulation demonstrates that price-taking behavior is a natural result of the conditions that create perfect competition. In trials, there is a significant degree of price convergence in just three or four rounds. Students find this…

  13. Instructional environments for simulations

    NARCIS (Netherlands)

    van Berkum, Jos J.A.; de Jong, Anthonius J.M.

    1991-01-01

    The use of computer simulations in education and training can have substantial advantages over other approaches. In comparison with alternatives such as textbooks, lectures, and tutorial courseware, a simulation-based approach offers the opportunity to learn in a relatively realistic problem-solving

  14. Instructional environments for simulations.

    NARCIS (Netherlands)

    van Berkum, J.J.A.|info:eu-repo/dai/nl/146736842; de Jong, T.

    1991-01-01

    The use of computer simulations in education and training can have substantial advantages over other approaches. In comparison with alternatives such as textbooks, lectures, and tutorial courseware, a simulation-based approach offers the opportunity to learn in a relatively realistic problem-solving

  15. Scientific Modeling and simulations

    CERN Document Server

    Diaz de la Rubia, Tomás

    2009-01-01

    Showcases the conceptual advantages of modeling which, coupled with the unprecedented computing power through simulations, allow scientists to tackle the formibable problems of our society, such as the search for hydrocarbons, understanding the structure of a virus, or the intersection between simulations and real data in extreme environments

  16. Simulation of quantum computers

    NARCIS (Netherlands)

    De Raedt, H; Michielsen, K; Hams, AH; Miyashita, S; Saito, K; Landau, DP; Lewis, SP; Schuttler, HB

    2001-01-01

    We describe a simulation approach to study the functioning of Quantum Computer hardware. The latter is modeled by a collection of interacting spin-1/2 objects. The time evolution of this spin system maps one-to-one to a quantum program carried out by the Quantum Computer. Our simulation software

  17. Beamstrahlung simulation and diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Ziemann, V.

    1991-06-01

    A simulation code that models the mutual deflection and the emission of beamstrahlung of two ultra-relativistic electron and positron bunches is described. The simulations are used to determine transverse beam sizes from observed beamstrahlung fluxes. 8 refs., 3 figs.

  18. Simulation Activity Diagrams

    OpenAIRE

    Ryan, John; Heavey, Cathal

    2003-01-01

    This paper presents a technique, Simulation Activity Diagrams (SAD), developed to lessen the modelling burden during the initial requirements gathering phases of a simulation project. The technique also allows the capture and visual communication of detailed information, to manufacturing personnel, which may otherwise be lost in detailed programming code.

  19. Approach to simulation effectiveness

    CSIR Research Space (South Africa)

    Goncalves, DPD

    2006-07-01

    Full Text Available ? The context and purpose of simulation are important in answering the question. If the simulation is viewed as a system, it follows that it has stakeholders and requirements originating from the creating system. An important result is that measures...

  20. Multicore Education through Simulation

    Science.gov (United States)

    Ozturk, O.

    2011-01-01

    A project-oriented course for advanced undergraduate and graduate students is described for simulating multiple processor cores. Simics, a free simulator for academia, was utilized to enable students to explore computer architecture, operating systems, and hardware/software cosimulation. Motivation for including this course in the curriculum is…

  1. TANGO Array. 2. Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Bauleo, P. E-mail: pablo.bauleo@colostate.edu; Bonifazi, C.; Filevich, A

    2004-01-11

    The angular and energy resolutions of the TANGO Array were obtained using extensive Monte Carlo simulations performed with a double purpose: (1) to determine the appropriate parameters for the array fitting to the desired range of sensitivity (the knee energy region), and (2) to construct a reliable shower database required for reference in the analysis of experimental data. The AIRES code, with the SIBYLL hadronic collision package, was used to simulate Extended Air Showers produced by primary cosmic rays (assuming protons and iron nuclei), with energies ranging from 10{sup 14} to 10{sup 18} eV. These data were fed into a realistic code which simulates the response of the detectors (water Cherenkov detectors), including the electronics, pickup noise, and the signal attenuation in the connecting cables. The trigger stage was considered in the simulations in order to estimate the trigger efficiency of the array and to verify the accuracy of the reconstruction codes. This paper delineates the simulations performed to obtain the expected behavior of the array, and describes the simulated data. The results of these simulations suggest that we can expect an error in the energy of the primary cosmic-ray of {approx}60% of the estimated value and that the error in the measurement of the direction of arrival can be estimated as {approx}4 deg. . The present simulations also indicate that unambiguous assignments of the primary energy cannot be obtained because of the uncertainty in the nature of the primary cosmic ray.

  2. TANGO Array.. 2. Simulations

    Science.gov (United States)

    Bauleo, P.; Bonifazi, C.; Filevich, A.

    2004-01-01

    The angular and energy resolutions of the TANGO Array were obtained using extensive Monte Carlo simulations performed with a double purpose: (1) to determine the appropriate parameters for the array fitting to the desired range of sensitivity (the knee energy region), and (2) to construct a reliable shower database required for reference in the analysis of experimental data. The AIRES code, with the SIBYLL hadronic collision package, was used to simulate Extended Air Showers produced by primary cosmic rays (assuming protons and iron nuclei), with energies ranging from 10 14 to 10 18 eV. These data were fed into a realistic code which simulates the response of the detectors (water Cherenkov detectors), including the electronics, pickup noise, and the signal attenuation in the connecting cables. The trigger stage was considered in the simulations in order to estimate the trigger efficiency of the array and to verify the accuracy of the reconstruction codes. This paper delineates the simulations performed to obtain the expected behavior of the array, and describes the simulated data. The results of these simulations suggest that we can expect an error in the energy of the primary cosmic-ray of ˜60% of the estimated value and that the error in the measurement of the direction of arrival can be estimated as ˜4°. The present simulations also indicate that unambiguous assignments of the primary energy cannot be obtained because of the uncertainty in the nature of the primary cosmic ray.

  3. Beyond Iconic Simulation

    Science.gov (United States)

    Dormans, Joris

    2011-01-01

    Realism remains a prominent topic in game design and industry research; yet, a strong academic case can be made that games are anything, but realistic. This article frames realism in games in semiotic terms as iconic simulation and argues that games can gain expressiveness when they move beyond the current focus on iconic simulation. In parallel…

  4. Parallel simulation today

    Science.gov (United States)

    Nicol, David; Fujimoto, Richard

    1992-01-01

    This paper surveys topics that presently define the state of the art in parallel simulation. Included in the tutorial are discussions on new protocols, mathematical performance analysis, time parallelism, hardware support for parallel simulation, load balancing algorithms, and dynamic memory management for optimistic synchronization.

  5. A Bakery Simulation

    Science.gov (United States)

    McCormick, Kathryn Eaton

    1975-01-01

    In keeping with current trends in career education in home economics, the food classes at Tuscola High School, Illinois, were involved in a bakery simulation. Objectives, suggestions for developing a simulated bakery, job roles, benefits, and sample forms are presented. (Author/MW)

  6. Electric-car simulation

    Science.gov (United States)

    Chapman, C. P.; Slusser, R. A.

    1980-01-01

    PARAMET, interactive simulation program for parametric studies of electric vehicles, guides user through simulation by menu and series of prompts for input parameters. Program considers aerodynamic drag, rolling resistance, linear and rotational acceleration, and road gradient as forces acting on vehicle.

  7. VCSEL Applications and Simulation

    Science.gov (United States)

    Cheung, Samson; Goorjian, Peter; Ning, Cun-Zheng; Li, Jian-Zhong

    2000-01-01

    This viewgraph presentation gives an overview of Vertical Cavity Surface Emitting Laser (VCSEL) simulation and its applications. Details are given on the optical interconnection in information technology of VCSEL, the formulation of the simulation, its numeric algorithm, and the computational results.

  8. Risk Management and Simulation

    DEFF Research Database (Denmark)

    Skovmand, David

    2014-01-01

    Review of: Risk Management and Simulation / Aparna Gupta. Boca Raton, FL: CRC Press, 2013, xxix + 491 pp., $99.95(H), ISBN: 978-1-4398-3594-4.......Review of: Risk Management and Simulation / Aparna Gupta. Boca Raton, FL: CRC Press, 2013, xxix + 491 pp., $99.95(H), ISBN: 978-1-4398-3594-4....

  9. Interactive Foresight Simulation

    DEFF Research Database (Denmark)

    Hansen, Mette Sanne; Rasmussen, Lauge Baungaard; Jacobsen, Peter

    2016-01-01

    The Combined Simulation Approach (CSA) is a way to evaluate risks and address potential unforeseen problems in a more interactive way than what is often observed in practice in companies or sectors. The approach is based on a combination of scenario analysis and discrete-event computer simulation...

  10. Political Simulations Using Excel

    Science.gov (United States)

    Jackson, Steven F.

    2013-01-01

    Simulations have received considerable attention as a tool to promote problem-solving skills, intense involvement, and high-order thinking among students. Whether semester-long exercises or a single-class session, simulations are often used in areas of conflict studies, diplomatic studies, trade disputes, electoral processes, and policy and legal…

  11. Airport Network Flow Simulator

    Science.gov (United States)

    1978-10-01

    The Airport Network Flow Simulator is a FORTRAN IV simulation of the flow of air traffic in the nation's 600 commercial airports. It calculates for any group of selected airports: (a) the landing and take-off (Type A) delays; and (b) the gate departu...

  12. Rainfall simulation in education

    Science.gov (United States)

    Peters, Piet; Baartman, Jantiene; Gooren, Harm; Keesstra, Saskia

    2016-04-01

    Rainfall simulation has become an important method for the assessment of soil erosion and soil hydrological processes. For students, rainfall simulation offers an year-round, attractive and active way of experiencing water erosion, while not being dependent on (outdoors) weather conditions. Moreover, using rainfall simulation devices, they can play around with different conditions, including rainfall duration, intensity, soil type, soil cover, soil and water conservation measures, etc. and evaluate their effect on erosion and sediment transport. Rainfall simulators differ in design and scale. At Wageningen University, both BSc and MSc student of the curriculum 'International Land and Water Management' work with different types of rainfall simulation devices in three courses: - A mini rainfall simulator (0.0625m2) is used in the BSc level course 'Introduction to Land Degradation and Remediation'. Groups of students take the mini rainfall simulator with them to a nearby field location and test it for different soil types, varying from clay to more sandy, slope angles and vegetation or litter cover. The groups decide among themselves which factors they want to test and they compare their results and discuss advantage and disadvantage of the mini-rainfall simulator. - A medium sized rainfall simulator (0.238 m2) is used in the MSc level course 'Sustainable Land and Water Management', which is a field practical in Eastern Spain. In this course, a group of students has to develop their own research project and design their field measurement campaign using the transportable rainfall simulator. - Wageningen University has its own large rainfall simulation laboratory, in which a 15 m2 rainfall simulation facility is available for research. In the BSc level course 'Land and Water Engineering' Student groups will build slopes in the rainfall simulator in specially prepared containers. Aim is to experience the behaviour of different soil types or slope angles when (heavy) rain

  13. A bobsleigh simulator software

    Energy Technology Data Exchange (ETDEWEB)

    Rempfler, Georg S., E-mail: georg.rempfler@alumni.ethz.ch [ETH Zurich, CLA G23.3, IMES—Center of Mechanics (Switzerland); Glocker, Christoph, E-mail: glocker@imes.mavt.ethz.ch [ETH Zurich, CLA J23.1, IMES—Center of Mechanics (Switzerland)

    2016-03-15

    This paper presents a model of the artificial ice track in Whistler, Canada that is based on its construction data, and a model of a two-men bobsleigh consisting of nine rigid bodies, having 13 degrees of freedom and incorporating 17 hard frictional contacts. These models are implemented within a simulator that is capable of performing accurate real time simulations of piloted runs on commonly available PC hardware. The simulation is verified against the results of the official two-men race that took place during the Olympic Winter Games in 2010. The simulator has been used by several professional Swiss pilots during their preparation for the 2014 Olympic Winter Games in Sochi, Russia. The simulator is exploited to analyse and judge the range of possible driving lines regarding speed and runtime improvements. It could also serve to consult track designers about safety issues and sleigh constructors about the expected dynamics on a track.

  14. Handbook of simulation optimization

    CERN Document Server

    Fu, Michael C

    2014-01-01

    The Handbook of Simulation Optimization presents an overview of the state of the art of simulation optimization, providing a survey of the most well-established approaches for optimizing stochastic simulation models and a sampling of recent research advances in theory and methodology. Leading contributors cover such topics as discrete optimization via simulation, ranking and selection, efficient simulation budget allocation, random search methods, response surface methodology, stochastic gradient estimation, stochastic approximation, sample average approximation, stochastic constraints, variance reduction techniques, model-based stochastic search methods and Markov decision processes. This single volume should serve as a reference for those already in the field and as a means for those new to the field for understanding and applying the main approaches. The intended audience includes researchers, practitioners and graduate students in the business/engineering fields of operations research, management science,...

  15. Massively parallel multicanonical simulations

    Science.gov (United States)

    Gross, Jonathan; Zierenberg, Johannes; Weigel, Martin; Janke, Wolfhard

    2018-03-01

    Generalized-ensemble Monte Carlo simulations such as the multicanonical method and similar techniques are among the most efficient approaches for simulations of systems undergoing discontinuous phase transitions or with rugged free-energy landscapes. As Markov chain methods, they are inherently serial computationally. It was demonstrated recently, however, that a combination of independent simulations that communicate weight updates at variable intervals allows for the efficient utilization of parallel computational resources for multicanonical simulations. Implementing this approach for the many-thread architecture provided by current generations of graphics processing units (GPUs), we show how it can be efficiently employed with of the order of 104 parallel walkers and beyond, thus constituting a versatile tool for Monte Carlo simulations in the era of massively parallel computing. We provide the fully documented source code for the approach applied to the paradigmatic example of the two-dimensional Ising model as starting point and reference for practitioners in the field.

  16. Hardware Accelerated Simulated Radiography

    Energy Technology Data Exchange (ETDEWEB)

    Laney, D; Callahan, S; Max, N; Silva, C; Langer, S; Frank, R

    2005-04-12

    We present the application of hardware accelerated volume rendering algorithms to the simulation of radiographs as an aid to scientists designing experiments, validating simulation codes, and understanding experimental data. The techniques presented take advantage of 32 bit floating point texture capabilities to obtain validated solutions to the radiative transport equation for X-rays. An unsorted hexahedron projection algorithm is presented for curvilinear hexahedra that produces simulated radiographs in the absorption-only regime. A sorted tetrahedral projection algorithm is presented that simulates radiographs of emissive materials. We apply the tetrahedral projection algorithm to the simulation of experimental diagnostics for inertial confinement fusion experiments on a laser at the University of Rochester. We show that the hardware accelerated solution is faster than the current technique used by scientists.

  17. Simulation in Complex Modelling

    DEFF Research Database (Denmark)

    Nicholas, Paul; Ramsgaard Thomsen, Mette; Tamke, Martin

    2017-01-01

    This paper will discuss the role of simulation in extended architectural design modelling. As a framing paper, the aim is to present and discuss the role of integrated design simulation and feedback between design and simulation in a series of projects under the Complex Modelling framework. Complex...... performance, engage with high degrees of interdependency and allow the emergence of design agency and feedback between the multiple scales of architectural construction. This paper presents examples for integrated design simulation from a series of projects including Lace Wall, A Bridge Too Far and Inflated...... Restraint developed for the research exhibition Complex Modelling, Meldahls Smedie Gallery, Copenhagen in 2016. Where the direct project aims and outcomes have been reported elsewhere, the aim for this paper is to discuss overarching strategies for working with design integrated simulation....

  18. Embedding Quantum Simulator

    Science.gov (United States)

    di Candia, Roberto; Mejia, Bernabé; Castillo, Hernan; Simon Pedernales, Julen; Casanova, Jorge; Solano, Enrique

    2014-03-01

    We introduce the concept of embedding quantum simulator, a paradigm allowing efficient computation of dynamical quantities requiring full quantum tomography in a standard quantum simulator (one-to-one quantum simulator). The concept consists in the suitable encoding of a simulated quantum dynamics in the enlarged Hilbert space of an embedding quantum simulator. In this manner, non-trivial quantities are mapped onto physical observables, overcoming the necessity of full tomography, and reducing drastically the experimental requirements. As examples, we discuss how to evaluate entanglement monotones and time correlation functions, each in a suitable embedding quantum simulator. Finally, we expect that the proposed embedding framework paves the way for a general theory of enhanced one-to-one quantum simulators. This work is supported by Spanish MINECO FIS2012-36673-C03-02; UPV/EHU UFI 11/55; UPV/EHU PhD fellowship; Basque Government IT472-10; SOLID, CCQED, PROMISCE, SCALEQIT EU projects; and Marco Polo PUCP grant.

  19. Simulation and surgical training.

    Science.gov (United States)

    Sarker, S K; Patel, B

    2007-12-01

    The aim of this review was to outline current forms of surgical simulation and methods of assessing technical skills using these forms of simulation. To review this subject, a literature search was done using key words 'assessment', 'simulation', 'surgery', 'technical skills' and 'virtual reality'. Simulation in surgery has several forms, inorganic (synthetic & computer) and organic (animal or cadaver). Surgical simulation is a mode of training which is promising and may be effective. Technical errors in the simulated environment do not have clinical consequences and does not have a morbidity or mortality. We must ensure that the competent skills learnt in the simulation environment are translated to the real environment. This can be achieved if the same assessment tools are used in both environments. Surgical training is entering a new era, with increased scrutiny and an evolving work and training environment. We as surgical teachers must ensure that the surgeons of the future are as competent as or better than their predecessors using these new modes of training which we have access to.

  20. Simulating 'the right stuff'

    Science.gov (United States)

    Fischetti, M. A.; Truxal, C.

    1985-03-01

    The present investigation is mainly concerned with simulators employed in the training of pilots in the Armed Services and other military personnel, taking into account certain problems and approaches for overcoming them. The use of simulators for training programs has a number of advantages compared to training involving a use of the actual equipment. Questions arise, however, regarding the value of such a training. Thus, it has been said that, while simulators gave students practice in manual skill, they could not teach them to handle the stress of being in a real aircraft. It has also been argued that some tasks are not represented accurately enough for proper training. In response to this criticism, the capacity of the simulators has been greatly improved. However, this development leads to problems related to the cost of simulator training. Attention is given to better visuals for flight simulators, the current generation of graphics imagery and expected improvements, possibilities for reducing flight simulator costs, and advances due to progress in microcomputers.

  1. Adiabatic quantum simulators

    Directory of Open Access Journals (Sweden)

    J. D. Biamonte

    2011-06-01

    Full Text Available In his famous 1981 talk, Feynman proposed that unlike classical computers, which would presumably experience an exponential slowdown when simulating quantum phenomena, a universal quantum simulator would not. An ideal quantum simulator would be controllable, and built using existing technology. In some cases, moving away from gate-model-based implementations of quantum computing may offer a more feasible solution for particular experimental implementations. Here we consider an adiabatic quantum simulator which simulates the ground state properties of sparse Hamiltonians consisting of one- and two-local interaction terms, using sparse Hamiltonians with at most three-local interactions. Properties of such Hamiltonians can be well approximated with Hamiltonians containing only two-local terms. The register holding the simulated ground state is brought adiabatically into interaction with a probe qubit, followed by a single diabatic gate operation on the probe which then undergoes free evolution until measured. This allows one to recover e.g. the ground state energy of the Hamiltonian being simulated. Given a ground state, this scheme can be used to verify the QMA-complete problem LOCAL HAMILTONIAN, and is therefore likely more powerful than classical computing.

  2. Loose Graph Simulations

    DEFF Research Database (Denmark)

    Mansutti, Alessio; Miculan, Marino; Peressotti, Marco

    2017-01-01

    We introduce loose graph simulations (LGS), a new notion about labelled graphs which subsumes in an intuitive and natural way subgraph isomorphism (SGI), regular language pattern matching (RLPM) and graph simulation (GS). Being a unification of all these notions, LGS allows us to express directly...... also problems which are “mixed” instances of previous ones, and hence which would not fit easily in any of them. After the definition and some examples, we show that the problem of finding loose graph simulations is NP-complete, we provide formal translation of SGI, RLPM, and GS into LGSs, and we give...

  3. Simulation of a microgrid

    Science.gov (United States)

    Dulǎu, Lucian Ioan

    2015-12-01

    This paper describes the simulation of a microgrid system with storage technologies. The microgrid comprises 6 distributed generators (DGs), 3 loads and a 150 kW storage unit. The installed capacity of the generators is 1100 kW, while the total load demand is 900 kW. The simulation is performed by using a SCADA software, considering the power generation costs, the loads demand and the system's power losses. The generators access the system in order of their power generation cost. The simulation is performed for the entire day.

  4. Supply Chain Simulation : A Survey

    NARCIS (Netherlands)

    Kleijnen, J.P.C.

    2003-01-01

    This paper provides a survey of simulation in supply chain management.It reviews four types of simulation, namely spreadsheet simulation, system dynamics, discreteevent simulation, and business games.Which simulation type should be applied, depends on the type of managerial question to be answered

  5. Immersive Simulation Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Develops and tests novel user interfaces for 3D virtual simulators and first-person shooter games that make user interaction more like natural interaction...

  6. CATCC/AATCC Simulator

    Data.gov (United States)

    Federal Laboratory Consortium — The 15G30 CATCC/AATCC simulator provides high fidelity training for Navy Air Traffic Control (ATC) trainees in a realistic shipboard air traffic control environment....

  7. Water Quality Analysis Simulation

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Water Quality analysis simulation Program, an enhancement of the original WASP. This model helps users interpret and predict water quality responses to natural...

  8. Cataract Vision Simulator

    Science.gov (United States)

    ... and Videos: What Do Cataracts Look Like? Cataract Vision Simulator Leer en Español: Simulador: Catarata Jun. 11, 2014 How do cataracts affect your vision? A cataract is a clouding of the eye's ...

  9. A Simulation of Amblyopia.

    Science.gov (United States)

    Rouse, Michael W.; And Others

    1988-01-01

    A simulation of the decreased visual acuity of individuals with amblyopia is used in one optometry program to help students understand how amblyopia patients see. Students act as patient, then as doctor, proceeding through clinical diagnosis. (MSE)

  10. Water Quality Analysis Simulation

    Science.gov (United States)

    The Water Quality analysis simulation Program, an enhancement of the original WASP. This model helps users interpret and predict water quality responses to natural phenomena and man-made pollution for variious pollution management decisions.

  11. On hadronic shower simulation

    CERN Document Server

    Wellisch, J P

    1999-01-01

    The exploitation of hadronic final states played a key role in the successes of all recent HEP collider experiments, and the ability to use the hadronic final state will continue to be one of the decisive issues during the LHC era. Monte Carlo techniques to make efficient use of hadronic final states have been developed for many years, and have a technological culmination in object oriented tool-kits for hadronic shower simulation that now are becoming available. In the present paper we give a brief overview on the physics modeling underlying hadronic shower simulation, and report on advanced techniques used and developed for simulation of hadronic showers in HEP experiments. We will discuss the three basic types of modelling - data driven, parametrisation driven, and theory driven modelling - and demonstrate ways to combine them in a flexible manner for concrete applications. We will confront the different types of modelling with the stringent requirements on hadronic shower simulation posed by LHC, and inve...

  12. Fidelity in clinical simulation

    DEFF Research Database (Denmark)

    Jensen, Sanne; Nøhr, Christian; Rasmussen, Stine Loft

    2013-01-01

    Clinical simulation may be used to identify user needs for context sensitive functionalities in e-Health. The objective with this paper is to describe how user requirements and use cases in a large EHR-platform procurement may be validated by clinical simulation using a very low-fidelity prototype...... without any existing test data. Instead of using test scenarios and use cases, the healthcare professionals who are participating in the clinical simulation are generating both scenario and patient data themselves. We found that this approach allows for an imaginative discussion, not restricted by known...... functionalities and limitations, of the ideal EHR-platform. Subsequently, we discuss benefits and challenges of using an extremely low fidelity environment and discuss the degree of fidelity necessary for conducting clinical simulation....

  13. Electromechanical Drivetrain Simulation

    DEFF Research Database (Denmark)

    Gallego-Calderon, Juan; Branner, Kim; Natarajan, Anand

    2013-01-01

    The work presented in this paper is another step from the DTU Wind Energy efforts to advance understanding of the electromechanical drive-train loads and its interaction with the rest of the components in the wind turbine. The main objective of the PhD is to investigate the modelling and simulation...... of a wind turbine’s drivetrain using an integrated simulation approach where different simulation tools are interconnected. Matlab and HAWC2 are used for this purpose. A contribution is expected to be in the study of the interaction between the mechanical loads in the gearbox due to gear mesh and bearing...... flexibilities, the generator dynamics and the grid, along with the structural loads in the wind turbine. In this paper, two simulation approaches are presented and conclusions are made according to their advantages and disadvantages. The drive-train is described by means of a torsional model composed...

  14. Adaptive core simulation

    Science.gov (United States)

    Abdel-Khalik, Hany Samy

    The work presented in this thesis is a continuation of a master's thesis research project conducted by the author to gain insight into the applicability of inverse methods to developing adaptive simulation capabilities for core physics problems. Use of adaptive simulation is intended to improve the fidelity and robustness of important core attributes predictions such as core power distribution, thermal margins and core reactivity. Adaptive simulation utilizes a selected set of past and current reactor measurements of reactor observables, i.e. in-core instrumentations readings, to adapt the simulation in a meaningful way. A meaningful adaption will result in high fidelity and robust adapted core simulators models. To perform adaption, we propose an inverse theory approach in which the multitudes of input data to core simulators, i.e. reactor physics and thermal-hydraulic data, are to be adjusted to improve agreement with measured observables while keeping core simulators models unadapted. At a first glance, devising such adaption for typical core simulators models would render the approach impractical. This follows, since core simulators are based on very demanding computational models, i.e. based on complex physics models with millions of input data and output observables. This would spawn not only several prohibitive challenges but also numerous disparaging concerns. The challenges include the computational burdens of the sensitivity-type calculations required to construct Jacobian operators for the core simulators models. Also, the computational burdens of the uncertainty-type calculations required to estimate the uncertainty information of core simulators input data presents a demanding challenge. The concerns however are mainly related to the reliability of the adjusted input data. We demonstrate that the power of our proposed approach is mainly driven by taking advantage of this unfavorable situation. Our contribution begins with the realization that to obtain

  15. Xyce parallel electronic simulator.

    Energy Technology Data Exchange (ETDEWEB)

    Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Rankin, Eric Lamont; Schiek, Richard Louis; Thornquist, Heidi K.; Fixel, Deborah A.; Coffey, Todd S; Pawlowski, Roger P; Santarelli, Keith R.

    2010-05-01

    This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide.

  16. BISEN: Biochemical Simulation Environment

    OpenAIRE

    Vanlier, J.; Wu, F.; Qi, F; Vinnakota, K. C.; Han, Y; Dash, R. K.; Yang, F; Beard, D. A.

    2009-01-01

    Summary: The Biochemical Simulation Environment (BISEN) is a suite of tools for generating equations and associated computer programs for simulating biochemical systems in the MATLAB® computing environment. This is the first package that can generate appropriate systems of differential equations for user-specified multi-compartment systems of enzymes and transporters accounting for detailed biochemical thermodynamics, rapid equilibria of multiple biochemical species and dynamic proton and met...

  17. Transient FDTD simulation validation

    OpenAIRE

    Jauregui Tellería, Ricardo; Riu Costa, Pere Joan; Silva Martínez, Fernando

    2010-01-01

    In computational electromagnetic simulations, most validation methods have been developed until now to be used in the frequency domain. However, the EMC analysis of the systems in the frequency domain many times is not enough to evaluate the immunity of current communication devices. Based on several studies, in this paper we propose an alternative method of validation of the transients in time domain allowing a rapid and objective quantification of the simulations results.

  18. Simulation versus Optimisation

    DEFF Research Database (Denmark)

    Lund, Henrik; Arler, Finn; Østergaard, Poul Alberg

    2017-01-01

    investment optimisation or optimal solutions approach. On the other hand the analytical simulation or alternatives assessment approach. Awareness of the dissimilar theoretical assumption behind the models clarifies differences between the models, explains dissimilarities in results, and provides...... a theoretical and methodological foundation for understanding and interpreting results from the two archetypes. Keywords: energy system analysis; investment optimisation models; simulations models; modelling theory;renewable energy...

  19. Validation of simulation models

    DEFF Research Database (Denmark)

    Rehman, Muniza; Pedersen, Stig Andur

    2012-01-01

    In philosophy of science, the interest for computational models and simulations has increased heavily during the past decades. Different positions regarding the validity of models have emerged but the views have not succeeded in capturing the diversity of validation methods. The wide variety...... of models has been somewhat narrow-minded reducing the notion of validation to establishment of truth. This article puts forward the diversity in applications of simulation models that demands a corresponding diversity in the notion of validation....

  20. Simulated Solute Tempering.

    Science.gov (United States)

    Denschlag, Robert; Lingenheil, Martin; Tavan, Paul; Mathias, Gerald

    2009-10-13

    For the enhanced conformational sampling in molecular dynamics (MD) simulations, we present "simulated solute tempering" (SST) which is an easy to implement variant of simulated tempering. SST extends conventional simulated tempering (CST) by key concepts of "replica exchange with solute tempering" (REST, Liu et al. Proc. Natl. Acad. Sci. U.S.A. 2005, 102, 13749). We have applied SST, CST, and REST to molecular dynamics (MD) simulations of an alanine octapeptide in explicit water. The weight parameters required for CST and SST are determined by two different formulas whose performance is compared. For SST only one of them yields a uniform sampling of the temperature space. Compared to CST and REST, SST provides the highest exchange probabilities between neighboring rungs in the temperature ladder. Concomitantly, SST leads to the fastest diffusion of the simulation system through the temperature space, in particular, if the "even-odd" exchange scheme is employed in SST. As a result, SST exhibits the highest sampling speed of the investigated tempering methods.

  1. CMS Fast Simulation

    CERN Document Server

    Rahmat, Rahmat

    2012-01-01

    A framework for Fast Simulation of particle interactions in the CMS detector has been developed and implemented in the overall simulation, reconstruction and analysis framework of CMS. It produces data samples in the same format as the one used by the Geant4-based (henceforth Full) Simulation and Reconstruction chain; the output of the Fast Simulation of CMS can therefore be used in the analysis in the same way as other ones. The Fast Simulation has been used already for several physics analyses in CMS, in particular those requiring a generation of many samples to scan an extended parameter space of the physics model (e.g. SUSY). Other use cases dealt with by the Fast Simulation of CMS are those involving the generation of large cross-section backgrounds, and samples of manageable size can only be produced by events skimming based on the final reconstructed objects, or those for which in general a large computation time is foreseen. An important issue, related with the high luminosity achieved by the LHC acce...

  2. Simulation - modeling - experiment; Simulation - modelisation - experience

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    After two workshops held in 2001 on the same topics, and in order to make a status of the advances in the domain of simulation and measurements, the main goals proposed for this workshop are: the presentation of the state-of-the-art of tools, methods and experiments in the domains of interest of the Gedepeon research group, the exchange of information about the possibilities of use of computer codes and facilities, about the understanding of physical and chemical phenomena, and about development and experiment needs. This document gathers 18 presentations (slides) among the 19 given at this workshop and dealing with: the deterministic and stochastic codes in reactor physics (Rimpault G.); MURE: an evolution code coupled with MCNP (Meplan O.); neutronic calculation of future reactors at EdF (Lecarpentier D.); advance status of the MCNP/TRIO-U neutronic/thermal-hydraulics coupling (Nuttin A.); the FLICA4/TRIPOLI4 thermal-hydraulics/neutronics coupling (Aniel S.); methods of disturbances and sensitivity analysis of nuclear data in reactor physics, application to VENUS-2 experimental reactor (Bidaud A.); modeling for the reliability improvement of an ADS accelerator (Biarotte J.L.); residual gas compensation of the space charge of intense beams (Ben Ismail A.); experimental determination and numerical modeling of phase equilibrium diagrams of interest in nuclear applications (Gachon J.C.); modeling of irradiation effects (Barbu A.); elastic limit and irradiation damage in Fe-Cr alloys: simulation and experiment (Pontikis V.); experimental measurements of spallation residues, comparison with Monte-Carlo simulation codes (Fallot M.); the spallation target-reactor coupling (Rimpault G.); tools and data (Grouiller J.P.); models in high energy transport codes: status and perspective (Leray S.); other ways of investigation for spallation (Audoin L.); neutrons and light particles production at intermediate energies (20-200 MeV) with iron, lead and uranium targets (Le Colley F

  3. Eternity Variables to Simulate Specifications

    NARCIS (Netherlands)

    Hesselink, WH; Boiten, EA; Moller, B

    2002-01-01

    Simulation of specifications is introduced as a unification and generalization of refinement mappings, history variables, forward simulations, prophecy variables, and backward simulations. Eternity variables are introduced as a more powerful alternative for prophecy variables and backward

  4. Interactive Dynamic-System Simulation

    CERN Document Server

    Korn, Granino A

    2010-01-01

    Showing you how to use personal computers for modeling and simulation, Interactive Dynamic-System Simulation, Second Edition provides a practical tutorial on interactive dynamic-system modeling and simulation. It discusses how to effectively simulate dynamical systems, such as aerospace vehicles, power plants, chemical processes, control systems, and physiological systems. Written by a pioneer in simulation, the book introduces dynamic-system models and explains how software for solving differential equations works. After demonstrating real simulation programs with simple examples, the author

  5. Converting DYNAMO simulations to Powersim Studio simulations

    Energy Technology Data Exchange (ETDEWEB)

    Walker, La Tonya Nicole; Malczynski, Leonard A.

    2014-02-01

    DYNAMO is a computer program for building and running 'continuous' simulation models. It was developed by the Industrial Dynamics Group at the Massachusetts Institute of Technology for simulating dynamic feedback models of business, economic, and social systems. The history of the system dynamics method since 1957 includes many classic models built in DYANMO. It was not until the late 1980s that software was built to take advantage of the rise of personal computers and graphical user interfaces that DYNAMO was supplanted. There is much learning and insight to be gained from examining the DYANMO models and their accompanying research papers. We believe that it is a worthwhile exercise to convert DYNAMO models to more recent software packages. We have made an attempt to make it easier to turn these models into a more current system dynamics software language, Powersim © Studio produced by Powersim AS2 of Bergen, Norway. This guide shows how to convert DYNAMO syntax into Studio syntax.

  6. Multi-purpose process simulators

    Directory of Open Access Journals (Sweden)

    Ommund Øgård

    1997-04-01

    Full Text Available The first part of this paper describes a multi-purpose dynamic simulator for the Heidrun oil production plant. The simulator integrates a commercial dynamic simulation model with the actual process control system to enable dynamic simulation, control system verification and operator training within the same framework and based on the same models and configuration data. The control system configuration can be imported directly into the simulator. This simplifies simulator maintenance and ensure consistency between the simulator and the real plant. The entire system runs on standard Unix work stations. The simulator has so far been used for initial operator training, control system verification and controller tuning.

  7. EMU Suit Performance Simulation

    Science.gov (United States)

    Cowley, Matthew S.; Benson, Elizabeth; Harvill, Lauren; Rajulu, Sudhakar

    2014-01-01

    Introduction: Designing a planetary suit is very complex and often requires difficult trade-offs between performance, cost, mass, and system complexity. To verify that new suit designs meet requirements, full prototypes must be built and tested with human subjects. However, numerous design iterations will occur before the hardware meets those requirements. Traditional draw-prototype-test paradigms for research and development are prohibitively expensive with today's shrinking Government budgets. Personnel at NASA are developing modern simulation techniques that focus on a human-centric design paradigm. These new techniques make use of virtual prototype simulations and fully adjustable physical prototypes of suit hardware. This is extremely advantageous and enables comprehensive design down-selections to be made early in the design process. Objectives: The primary objective was to test modern simulation techniques for evaluating the human performance component of two EMU suit concepts, pivoted and planar style hard upper torso (HUT). Methods: This project simulated variations in EVA suit shoulder joint design and subject anthropometry and then measured the differences in shoulder mobility caused by the modifications. These estimations were compared to human-in-the-loop test data gathered during past suited testing using four subjects (two large males, two small females). Results: Results demonstrated that EVA suit modeling and simulation are feasible design tools for evaluating and optimizing suit design based on simulated performance. The suit simulation model was found to be advantageous in its ability to visually represent complex motions and volumetric reach zones in three dimensions, giving designers a faster and deeper comprehension of suit component performance vs. human performance. Suit models were able to discern differing movement capabilities between EMU HUT configurations, generic suit fit concerns, and specific suit fit concerns for crewmembers based

  8. Computer Modeling and Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Pronskikh, V. S. [Fermilab

    2014-05-09

    Verification and validation of computer codes and models used in simulation are two aspects of the scientific practice of high importance and have recently been discussed by philosophers of science. While verification is predominantly associated with the correctness of the way a model is represented by a computer code or algorithm, validation more often refers to model’s relation to the real world and its intended use. It has been argued that because complex simulations are generally not transparent to a practitioner, the Duhem problem can arise for verification and validation due to their entanglement; such an entanglement makes it impossible to distinguish whether a coding error or model’s general inadequacy to its target should be blamed in the case of the model failure. I argue that in order to disentangle verification and validation, a clear distinction between computer modeling (construction of mathematical computer models of elementary processes) and simulation (construction of models of composite objects and processes by means of numerical experimenting with them) needs to be made. Holding on to that distinction, I propose to relate verification (based on theoretical strategies such as inferences) to modeling and validation, which shares the common epistemology with experimentation, to simulation. To explain reasons of their intermittent entanglement I propose a weberian ideal-typical model of modeling and simulation as roles in practice. I suggest an approach to alleviate the Duhem problem for verification and validation generally applicable in practice and based on differences in epistemic strategies and scopes

  9. Multilevel turbulence simulations

    Energy Technology Data Exchange (ETDEWEB)

    Tziperman, E. [Princeton Univ., NJ (United States)

    1994-12-31

    The authors propose a novel method for the simulation of turbulent flows, that is motivated by and based on the Multigrid (MG) formalism. The method, called Multilevel Turbulence Simulations (MTS), is potentially more efficient and more accurate than LES. In many physical problems one is interested in the effects of the small scales on the larger ones, or in a typical realization of the flow, and not in the detailed time history of each small scale feature. MTS takes advantage of the fact that the detailed simulation of small scales is not needed at all times, in order to make the calculation significantly more efficient, while accurately accounting for the effects of the small scales on the larger scale of interest. In MTS, models of several resolutions are used to represent the turbulent flow. The model equations in each coarse level incorporate a closure term roughly corresponding to the tau correction in the MG formalism that accounts for the effects of the unresolvable scales on that grid. The finer resolution grids are used only a small portion of the simulation time in order to evaluate the closure terms for the coarser grids, while the coarse resolution grids are then used to accurately and efficiently calculate the evolution of the larger scales. The methods efficiency relative to direct simulations is of the order of the ratio of required integration time to the smallest eddies turnover time, potentially resulting in orders of magnitude improvement for a large class of turbulence problems.

  10. Simulation of Mission Phases

    Science.gov (United States)

    Carlstrom, Nicholas Mercury

    2016-01-01

    This position with the Simulation and Graphics Branch (ER7) at Johnson Space Center (JSC) provided an introduction to vehicle hardware, mission planning, and simulation design. ER7 supports engineering analysis and flight crew training by providing high-fidelity, real-time graphical simulations in the Systems Engineering Simulator (SES) lab. The primary project assigned by NASA mentor and SES lab manager, Meghan Daley, was to develop a graphical simulation of the rendezvous, proximity operations, and docking (RPOD) phases of flight. The simulation is to include a generic crew/cargo transportation vehicle and a target object in low-Earth orbit (LEO). Various capsule, winged, and lifting body vehicles as well as historical RPOD methods were evaluated during the project analysis phase. JSC core mission to support the International Space Station (ISS), Commercial Crew Program (CCP), and Human Space Flight (HSF) influenced the project specifications. The simulation is characterized as a 30 meter +V Bar and/or -R Bar approach to the target object's docking station. The ISS was selected as the target object and the international Low Impact Docking System (iLIDS) was selected as the docking mechanism. The location of the target object's docking station corresponds with the RPOD methods identified. The simulation design focuses on Guidance, Navigation, and Control (GNC) system architecture models with station keeping and telemetry data processing capabilities. The optical and inertial sensors, reaction control system thrusters, and the docking mechanism selected were based on CCP vehicle manufacturer's current and proposed technologies. A significant amount of independent study and tutorial completion was required for this project. Multiple primary source materials were accessed using the NASA Technical Report Server (NTRS) and reference textbooks were borrowed from the JSC Main Library and International Space Station Library. The Trick Simulation Environment and User

  11. Interface Simulation Distances

    Directory of Open Access Journals (Sweden)

    Pavol Černý

    2012-10-01

    Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.

  12. Innovative simulation systems

    CERN Document Server

    Jędrasiak, Karol

    2016-01-01

    This monograph provides comprehensive guidelines on the current and future trends of innovative simulation systems. In particular, their important components, such as augmented reality and unmanned vehicles are presented. The book consists of three parts. Each part presents good practices, new methods, concepts of systems and new algorithms. Presented challenges and solutions are the results of research and conducted by the contributing authors. The book describes and evaluates the current state of knowledge in the field of innovative simulation systems. Throughout the chapters there are presented current issues and concepts of systems, technology, equipment, tools, research challenges and current, past and future applications of simulation systems. The book is addressed to a wide audience: academic staff, representatives of research institutions, employees of companies and government agencies as well as students and graduates of technical universities in the country and abroad. The book can be a valuable sou...

  13. Liquid filtration simulation

    Energy Technology Data Exchange (ETDEWEB)

    Corey, I.; Bergman, W.

    1996-06-01

    We have a developed a computer code that simulates 3-D filtration of suspended particles in fluids in realistic filter structures. This code, being the most advanced filtration simulation package developed to date, provides LLNL and DOE with new capabilities to address problems in cleaning liquid wastes, medical fluid cleaning, and recycling liquids. The code is an integrated system of commercially available and LLNL-developed software; the most critical are the computational fluid dynamics (CFD) solver and the particle transport program. For the CFD solver, we used a commercial package based on Navier-Stokes equations and a LLNL-developed package based on Boltzman-lattice gas equations. For the particle transport program, we developed a cod based on the 3-D Langevin equation of motion and the DLVO theory of electrical interactions. A number of additional supporting packages were purchased or developed to integrate the simulation tasks and to provide visualization output.

  14. SIMULATION OF LOGISTICS PROCESSES

    Directory of Open Access Journals (Sweden)

    Yu. Taranenko

    2016-08-01

    Full Text Available The article deals with the theoretical basis of the simulation. The study shows the simulation of logistic processes in industrial countries is an integral part of many economic projects aimed at the creation or improvement of logistics systems. The paper was used model Beer Game for management of logistics processes in the enterprise. The simulation model implements in AnyLogic package. AnyLogic product allows us to consider the logistics processes as an integrated system, which allows reaching better solutions. Logistics process management involves pooling the sales market, production and distribution to ensure the temporal level of customer service at the lowest cost overall. This made it possible to conduct experiments and to determine the optimal size of the warehouse at the lowest cost.

  15. Immune system simulation online

    DEFF Research Database (Denmark)

    Rapin, Nicolas; Lund, Ole; Castiglione, Filippo

    2011-01-01

    MOTIVATION: The recognition of antigenic peptides is a major event of an immune response. In current mesoscopic-scale simulators of the immune system, this crucial step has been modeled in a very approximated way. RESULTS: We have equipped an agent-based model of the immune system with immuno......-informatics methods to allow the simulation of the cardinal events of the antigenic recognition, going from single peptides to whole proteomes. The recognition process accounts for B cell-epitopes prediction through Parker-scale affinity estimation, class I and II HLA peptide prediction and binding through position...... simulation. AVAILABILITY: http://www.cbs.dtu.dk/services/C-ImmSim-10.1/ CONTACT: f.castiglione@iac.cnr.it...

  16. BISEN: Biochemical Simulation Environment.

    Science.gov (United States)

    Vanlier, J; Wu, F; Qi, F; Vinnakota, K C; Han, Y; Dash, R K; Yang, F; Beard, D A

    2009-03-15

    The Biochemical Simulation Environment (BISEN) is a suite of tools for generating equations and associated computer programs for simulating biochemical systems in the MATLAB computing environment. This is the first package that can generate appropriate systems of differential equations for user-specified multi-compartment systems of enzymes and transporters accounting for detailed biochemical thermodynamics, rapid equilibria of multiple biochemical species and dynamic proton and metal ion buffering. The software and a user manual (including several tutorial examples) are available at bbc.mcw.edu/BISEN.

  17. In-Situ Simulation

    DEFF Research Database (Denmark)

    Bjerregaard, Anders Thais; Slot, Susanne; Paltved, Charlotte

    2015-01-01

    for the in situ simulation program. Three scenarios were written and were double-checked by two medical experts. One researcher observed the training to score events and fill out the Team Emergency Assessment Measure (TEAM), a validated team observational tool set for measuring teamwork skills during medical...... emergencies. It contains 12 questions, which are rated using a five-point scale, and covers four categories; leadership, teamwork and task management, and an overall score on team performance. Results: 16 simulations were conducted with 16 different teams of 10 doctors and 32 nurses. First, this study took...

  18. Water Energy Simulation Toolset

    Energy Technology Data Exchange (ETDEWEB)

    2017-05-17

    The Water-Energy Simulation Toolset (WEST) is an interactive simulation model that helps visualize impacts of different stakeholders on water quantity and quality of a watershed. The case study is applied for the Snake River Basin with the fictional name Cutthroat River Basin. There are four groups of stakeholders of interest: hydropower, agriculture, flood control, and environmental protection. Currently, the quality component depicts nitrogen-nitrate contaminant. Users can easily interact with the model by changing certain inputs (climate change, fertilizer inputs, etc.) to observe the change over the entire system. Users can also change certain parameters to test their management policy.

  19. Project Schedule Simulation

    DEFF Research Database (Denmark)

    Mizouni, Rabeb; Lazarova-Molnar, Sanja

    2015-01-01

    overrun both their budget and time. To improve the quality of initial project plans, we show in this paper the importance of (1) reflecting features’ priorities/risk in task schedules and (2) considering uncertainties related to human factors in plan schedules. To make simulation tasks reflect features....... By comparing EPS to classical schedules, EPS simulation provides more accurate results with regards to project goals. These instructions give you guidelines for preparing papers for Journal of Software (JSW). Use this document as a template if you are using Microsoft Word 6.0 or later. Otherwise, use...

  20. Skin simulators for dermatological procedures

    OpenAIRE

    Wang, Xiaojie; Albahrani, Yasser; Pan, Michael; Levitt, Jacob

    2015-01-01

    Background: A variety of skin simulators are available on which to practice procedures; however, choice of a suboptimal substitute compromises realism and productive practice. Objective: Skin simulators for basic dermatological procedures are reviewed. Methods: The authors’ anecdotal experience with various skin simulators for different procedures is shared. Results: The following simulators are suggested:  an unripe banana ...

  1. Simulating neural systems with Xyce.

    Energy Technology Data Exchange (ETDEWEB)

    Schiek, Richard Louis; Thornquist, Heidi K.; Mei, Ting; Warrender, Christina E.; Aimone, James Bradley; Teeter, Corinne; Duda, Alex M.

    2012-12-01

    Sandias parallel circuit simulator, Xyce, can address large scale neuron simulations in a new way extending the range within which one can perform high-fidelity, multi-compartment neuron simulations. This report documents the implementation of neuron devices in Xyce, their use in simulation and analysis of neuron systems.

  2. Computer Simulation in Tomorrow's Schools.

    Science.gov (United States)

    Foster, David

    1984-01-01

    Suggests use of simulation as an educational strategy has promise for the school of the future; discusses specific advantages of simulations over alternative educational methods, role of microcomputers in educational simulation, and past obstacles and future promise of microcomputer simulations; and presents a literature review on effectiveness of…

  3. Simulation in International Relations Education.

    Science.gov (United States)

    Starkey, Brigid A.; Blake, Elizabeth L.

    2001-01-01

    Discusses the educational implications of simulations in international relations. Highlights include the development of international relations simulations; the role of technology; the International Communication and Negotiation Simulations (ICONS) project at the University of Maryland; evolving information technology; and simulating real-world…

  4. The JWS online simulation database.

    Science.gov (United States)

    Peters, Martin; Eicher, Johann J; van Niekerk, David D; Waltemath, Dagmar; Snoep, Jacky L

    2017-05-15

    JWS Online is a web-based platform for construction, simulation and exchange of models in standard formats. We have extended the platform with a database for curated simulation experiments that can be accessed directly via a URL, allowing one-click reproduction of published results. Users can modify the simulation experiments and export them in standard formats. The Simulation database thus lowers the bar on exploring computational models, helps users create valid simulation descriptions and improves the reproducibility of published simulation experiments. The Simulation Database is available on line at https://jjj.bio.vu.nl/models/experiments/ . jls@sun.ac.za .

  5. Simulating solar MHD

    Directory of Open Access Journals (Sweden)

    M. Schüssler

    Full Text Available Two aspects of solar MHD are discussed in relation to the work of the MHD simulation group at KIS. Photospheric magneto-convection, the nonlinear interaction of magnetic field and convection in a strongly stratified, radiating fluid, is a key process of general astrophysical relevance. Comprehensive numerical simulations including radiative transfer have significantly improved our understanding of the processes and have become an important tool for the interpretation of observational data. Examples of field intensification in the solar photosphere ('convective collapse' are shown. The second line of research is concerned with the dynamics of flux tubes in the convection zone, which has far-reaching implications for our understanding of the solar dynamo. Simulations indicate that the field strength in the region where the flux is stored before erupting to form sunspot groups is of the order of 105 G, an order of magnitude larger than previous estimates based on equipartition with the kinetic energy of convective flows.

    Key words. Solar physics · astrophysics and astronomy (photosphere and chromosphere; stellar interiors and dynamo theory; numerical simulation studies.

  6. Simulating Energy Transitions

    NARCIS (Netherlands)

    Chappin, E.J.L.

    2011-01-01

    Have you ever wanted to know whether a CO2 tax outperforms the EU emissions trading scheme? Or how long it really takes markets to change and to let consumers choose differently? In this book, Emile Chappin explores simulation models to provide us with answers before policy interventions are

  7. Simulation Insights Using "R"

    Science.gov (United States)

    Kostadinov, Boyan

    2013-01-01

    This article attempts to introduce the reader to computational thinking and solving problems involving randomness. The main technique being employed is the Monte Carlo method, using the freely available software "R for Statistical Computing." The author illustrates the computer simulation approach by focusing on several problems of…

  8. PSH Transient Simulation Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, Eduard [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-12-21

    PSH Transient Simulation Modeling presentation from the WPTO FY14 - FY16 Peer Review. Transient effects are an important consideration when designing a PSH system, yet numerical techniques for hydraulic transient analysis still need improvements for adjustable-speed (AS) reversible pump-turbine applications.

  9. Molecular simulation of NH

    NARCIS (Netherlands)

    Kabra, Abhishek; Becker, T.M.; Wang, M.; Infante Ferreira, C.A.; Vlugt, T.J.H.

    2017-01-01

    Force Field based Monte Carlo (MC) simulations are conducted to predict the performance of an absorption heat pump cycle involving NH3/ionic liquid (IL) (refrigerant/absorbent) as working pair. To investigate the thermodynamic performance of the cycle, various properties such as the enthalpy of

  10. Multimodal perception and simulation

    NARCIS (Netherlands)

    Werkhoven, P.J.; Erp, J.B.F. van

    2013-01-01

    This chapter discusses mechanisms of multimodal perception in the context of multimodal simulators and virtual worlds. We review some notable findings from psychophysical experiments with a focus on what we call touch-inclusive multimodal perception—that is, the sensory integration of the tactile

  11. Simulation of geothermal subsidence

    Energy Technology Data Exchange (ETDEWEB)

    Miller, I.; Dershowitz, W.; Jones, K.; Myer, L.; Roman, K.; Schauer, M.

    1980-03-01

    The results of an assessment of existing mathematical models for subsidence simulation and prediction are summarized. The following subjects are discussed: the prediction process, physical processes of geothermal subsidence, computational models for reservoir flow, computational models for deformation, proficiency assessment, and real and idealized case studies. (MHR)

  12. Simulating the Physical World

    Science.gov (United States)

    Berendsen, Herman J. C.

    2004-06-01

    The simulation of physical systems requires a simplified, hierarchical approach which models each level from the atomistic to the macroscopic scale. From quantum mechanics to fluid dynamics, this book systematically treats the broad scope of computer modeling and simulations, describing the fundamental theory behind each level of approximation. Berendsen evaluates each stage in relation to its applications giving the reader insight into the possibilities and limitations of the models. Practical guidance for applications and sample programs in Python are provided. With a strong emphasis on molecular models in chemistry and biochemistry, this book will be suitable for advanced undergraduate and graduate courses on molecular modeling and simulation within physics, biophysics, physical chemistry and materials science. It will also be a useful reference to all those working in the field. Additional resources for this title including solutions for instructors and programs are available online at www.cambridge.org/9780521835275. The first book to cover the wide range of modeling and simulations, from atomistic to the macroscopic scale, in a systematic fashion Providing a wealth of background material, it does not assume advanced knowledge and is eminently suitable for course use Contains practical examples and sample programs in Python

  13. Juno Mission Simulation

    Science.gov (United States)

    Lee, Meemong; Weidner, Richard J.

    2008-01-01

    The Juno spacecraft is planned to launch in August of 2012 and would arrive at Jupiter four years later. The spacecraft would spend more than one year orbiting the planet and investigating the existence of an ice-rock core; determining the amount of global water and ammonia present in the atmosphere, studying convection and deep- wind profiles in the atmosphere; investigating the origin of the Jovian magnetic field, and exploring the polar magnetosphere. Juno mission management is responsible for mission and navigation design, mission operation planning, and ground-data-system development. In order to ensure successful mission management from initial checkout to final de-orbit, it is critical to share a common vision of the entire mission operation phases with the rest of the project teams. Two major challenges are 1) how to develop a shared vision that can be appreciated by all of the project teams of diverse disciplines and expertise, and 2) how to continuously evolve a shared vision as the project lifecycle progresses from formulation phase to operation phase. The Juno mission simulation team addresses these challenges by developing agile and progressive mission models, operation simulations, and real-time visualization products. This paper presents mission simulation visualization network (MSVN) technology that has enabled a comprehensive mission simulation suite (MSVN-Juno) for the Juno project.

  14. Enabling immersive simulation.

    Energy Technology Data Exchange (ETDEWEB)

    McCoy, Josh (University of California Santa Cruz, Santa Cruz, CA); Mateas, Michael (University of California Santa Cruz, Santa Cruz, CA); Hart, Derek H.; Whetzel, Jonathan; Basilico, Justin Derrick; Glickman, Matthew R.; Abbott, Robert G.

    2009-02-01

    The object of the 'Enabling Immersive Simulation for Complex Systems Analysis and Training' LDRD has been to research, design, and engineer a capability to develop simulations which (1) provide a rich, immersive interface for participation by real humans (exploiting existing high-performance game-engine technology wherever possible), and (2) can leverage Sandia's substantial investment in high-fidelity physical and cognitive models implemented in the Umbra simulation framework. We report here on these efforts. First, we describe the integration of Sandia's Umbra modular simulation framework with the open-source Delta3D game engine. Next, we report on Umbra's integration with Sandia's Cognitive Foundry, specifically to provide for learning behaviors for 'virtual teammates' directly from observed human behavior. Finally, we describe the integration of Delta3D with the ABL behavior engine, and report on research into establishing the theoretical framework that will be required to make use of tools like ABL to scale up to increasingly rich and realistic virtual characters.

  15. Smoothed Particle Hydrodynamic Simulator

    Energy Technology Data Exchange (ETDEWEB)

    2016-10-05

    This code is a highly modular framework for developing smoothed particle hydrodynamic (SPH) simulations running on parallel platforms. The compartmentalization of the code allows for rapid development of new SPH applications and modifications of existing algorithms. The compartmentalization also allows changes in one part of the code used by many applications to instantly be made available to all applications.

  16. Reasoning as simulation.

    Science.gov (United States)

    Cassimatis, Nicholas L; Murugesan, Arthi; Bignoli, Perrin G

    2009-11-01

    The theory that human cognition proceeds through mental simulations, if true, would provide a parsimonious explanation of how the mechanisms of reasoning and problem solving integrate with and develop from mechanisms underlying forms of cognition that occur earlier in evolution and development. However, questions remain about whether simulation mechanisms are powerful enough to exhibit human-level reasoning and inference. In order to investigate this issue, we show that it is possible to characterize some of the most powerful modern artificial intelligence algorithms for logical and probabilistic inference as methods of simulating alternate states of the world. We show that a set of specific human perceptual mechanisms, even if not implemented using mechanisms described in artificial intelligence, can nevertheless perform the same operations as those algorithms. Although this result does not demonstrate that simulation theory is true, it does show that whatever mechanisms underlie perception have at least as much power to explain non-perceptual human reasoning and problem solving as some of the most powerful known algorithms.

  17. [Ethics and medical simulation].

    Science.gov (United States)

    Beloucif, Sadek; Mignon, Alexandre

    2017-03-01

    Simulation in health care helps to raise health professionals' awareness of medical ethics and to understand the mechanisms involved in a difficult situation. They can thereby adopt a suitable form of behaviour and communication. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  18. The LHCb Grid Simulation

    CERN Multimedia

    Baranov, Alexander

    2016-01-01

    The LHCb Grid access if based on the LHCbDirac system. It provides access to data and computational resources to researchers with different geographical locations. The Grid has a hierarchical topology with multiple sites distributed over the world. The sites differ from each other by their number of CPUs, amount of disk storage and connection bandwidth. These parameters are essential for the Grid work. Moreover, job scheduling and data distribution strategy have a great impact on the grid performance. However, it is hard to choose an appropriate algorithm and strategies as they need a lot of time to be tested on the real grid. In this study, we describe the LHCb Grid simulator. The simulator reproduces the LHCb Grid structure with its sites and their number of CPUs, amount of disk storage and bandwidth connection. We demonstrate how well the simulator reproduces the grid work, show its advantages and limitations. We show how well the simulator reproduces job scheduling and network anomalies, consider methods ...

  19. A Learning Community Simulation

    NARCIS (Netherlands)

    Koné, Malik; Berlanga, Adriana; Sloep, Peter; Koper, Rob

    2007-01-01

    Koné, M., Berlanga, A. J., Sloep, P. B., & Koper, R. (2007). A Learning Community Simulation. In P. Kommers & P. Isaias (Eds.), Proceedings of the IADIS International Conference on Web Based Communities 2007 (pp. 331-335). February, 18-20, 2007, Salamanca, Spain: IADIS Press.

  20. Projective simulation with generalization.

    Science.gov (United States)

    Melnikov, Alexey A; Makmal, Adi; Dunjko, Vedran; Briegel, Hans J

    2017-10-31

    The ability to generalize is an important feature of any intelligent agent. Not only because it may allow the agent to cope with large amounts of data, but also because in some environments, an agent with no generalization capabilities cannot learn. In this work we outline several criteria for generalization, and present a dynamic and autonomous machinery that enables projective simulation agents to meaningfully generalize. Projective simulation, a novel, physical approach to artificial intelligence, was recently shown to perform well in standard reinforcement learning problems, with applications in advanced robotics as well as quantum experiments. Both the basic projective simulation model and the presented generalization machinery are based on very simple principles. This allows us to provide a full analytical analysis of the agent's performance and to illustrate the benefit the agent gains by generalizing. Specifically, we show that already in basic (but extreme) environments, learning without generalization may be impossible, and demonstrate how the presented generalization machinery enables the projective simulation agent to learn.

  1. Automated Simulation Model Generation

    NARCIS (Netherlands)

    Huang, Y.

    2013-01-01

    One of today's challenges in the field of modeling and simulation is to model increasingly larger and more complex systems. Complex models take long to develop and incur high costs. With the advances in data collection technologies and more popular use of computer-aided systems, more data has become

  2. WFIRST: Grism Simulations

    Science.gov (United States)

    Colbert, James; Casertano, Stephano; Kirkpatrick, J. Davy; Rhoads, James; Ryan, Russell; Wang, Yun; Baronchelli, Ivano; Brammer, Gabriel; Dixon, Van; Henry, Alaina; Kruk, Jeffrey; Ravindranath, Swara; Sosey, Megan; Teplitz, Harry

    2018-01-01

    The WFIRST galaxy redshift survey probes the nature of dark energy through the 3D clustering of galaxies. Realistic grism simulations are important for assessing its performance and modeling the systematic uncertainties. Our latest WFIRST grism simulation work consists of two components. The first component is the creation of slitless grism images with appropriate detector and spectral parameters, such as pixel scale, responsivity, detector position-dependent distortions, traces, offsets, and wavelength dispersions. The second component is the generation of the input lists that are to be fed into the simulation software. For these input lists we have developed three different methods: 1) Direct transfer of an already observed WFC3 grism field, 2) Non-realistic tests of parameter space, appropriate for examining the effects of altering a basic input parameter, like wavelength resolution, 3) Generation of a random, realistic sky field based on measured H-alpha luminosity functions, with observed distributions of equivalent width, size, J-H color, and major/minor axis ratios taken from HST WFC3 grism data (WISP Survey, PI: Malkan). We apply different parameter distributions for the emission-line and the non-emitting field galaxies and we also include star distributions based on galactic latitude, achieving a source density and object overlap consistent with the true sky. We discuss the use of these simulations for analysis and validation.

  3. Active Target Simulation

    Science.gov (United States)

    Smith, Nathan; Draznik, Peter; Frank, Nathan

    2012-10-01

    We have simulated an existing experimental design to determine the resolution improvement upon energy measurements of neutron unbound nuclei. A number of experiments of this type have been performed at the National Superconducting Cyclotron Laboratory (NSCL), located at Michigan State University. An excited nucleus is typically produced with a radioactive beam interacting with a passive Beryllium target. Many different nuclei are produced in experiment, each of which immediately decays into a charged particle and neutron. The charged particles are detected and the neutrons interact in scintillation detectors such as the Modular Neutron Array (MoNA) and Large Multi-Institutional Scintillation Array (LISA). In our simulation, we have constructed an active target that provides additional information such that the point of nuclear interaction within the target may be determined. This information improves the resolution in decay energy measurements of neutron unbound isotopes. This presentation will cover some aspects of the simulation process, as well as showing some of the results that demonstrate the simulated improvement over a passive target.

  4. Numerical Propulsion System Simulation

    Science.gov (United States)

    Naiman, Cynthia

    2006-01-01

    The NASA Glenn Research Center, in partnership with the aerospace industry, other government agencies, and academia, is leading the effort to develop an advanced multidisciplinary analysis environment for aerospace propulsion systems called the Numerical Propulsion System Simulation (NPSS). NPSS is a framework for performing analysis of complex systems. The initial development of NPSS focused on the analysis and design of airbreathing aircraft engines, but the resulting NPSS framework may be applied to any system, for example: aerospace, rockets, hypersonics, power and propulsion, fuel cells, ground based power, and even human system modeling. NPSS provides increased flexibility for the user, which reduces the total development time and cost. It is currently being extended to support the NASA Aeronautics Research Mission Directorate Fundamental Aeronautics Program and the Advanced Virtual Engine Test Cell (AVETeC). NPSS focuses on the integration of multiple disciplines such as aerodynamics, structure, and heat transfer with numerical zooming on component codes. Zooming is the coupling of analyses at various levels of detail. NPSS development includes capabilities to facilitate collaborative engineering. The NPSS will provide improved tools to develop custom components and to use capability for zooming to higher fidelity codes, coupling to multidiscipline codes, transmitting secure data, and distributing simulations across different platforms. These powerful capabilities extend NPSS from a zero-dimensional simulation tool to a multi-fidelity, multidiscipline system-level simulation tool for the full development life cycle.

  5. Simulations of Solar Jets

    Science.gov (United States)

    Kohler, Susanna

    2017-02-01

    Formation of a coronal jet from twisted field lines that have reconnected with the ambient field. The colors show the radial velocity of the plasma. [Adapted from Szente et al. 2017]How do jets emitted from the Suns surface contribute to its corona and to the solar wind? In a recent study, a team of scientists performed complex three-dimensional simulations of coronal jets to answer these questions.Small ExplosionsCoronal jets are relatively small eruptions from the Suns surface, with heights of roughly 100 to 10,000 km, speeds of 10 to 1,000 km/s, and lifetimes of a few minutes to around ten hours. These jets are constantly present theyre emitted even from the quiet Sun, when activity is otherwise low and weve observed them with a fleet of Sun-watching space telescopes spanning the visible, extreme ultraviolet (EUV), and X-ray wavelength bands.A comparison of simulated observations based on the authors model (left panels) to actual EUV and X-ray observations of jets (right panels). [Szente et al. 2017]Due to their ubiquity, we speculate that these jets might contribute to heating the global solar corona (which is significantly hotter than the surface below it, a curiosity known as the coronal heating problem). We can also wonder what role these jets might play in driving the overall solar wind.Launching a JetLed by Judit Szente (University of Michigan), a team of scientists has explored the impact of coronal jets on the global corona and solar wind with a series of numerical simulations. Szente and collaborators used three-dimensional, magnetohydrodynamic simulations that provide realistic treatment of the solar atmosphere, the solar wind acceleration, and the complexities of heat transfer throughout the corona.In the authors simulations, a jet is initiated as a magnetic dipole rotates at the solar surface, winding up field lines. Magnetic reconnection between the twisted lines and the background field then launches the jet from the dense and hot solar

  6. Simulating the WFXT sky.

    Science.gov (United States)

    Tozzi, P.; Santos, J.; Yu, H.; Bignamini, A.; Rosati, P.; Borgani, S.; Campana, S.; Conconi, P.; Gilli, R.; Paolillo, M.; Ptak, A.; WFXT Team

    We investigate the scientific impact of the Wide Field X-ray Telescope mission. We present simulated images and spectra of X-ray sources as observed from the three surveys planned for the nominal 5-year WFXT lifetime. The goal of these simulations is to provide WFXT images of the extragalactic sky in different energy bands based on accurate description of AGN populations, normal and star forming galaxies, groups and clusters of galaxies. The images are realized using a detailed PSF model, instrumental and physical backgrounds/foregrounds, accurate model of the effective area and the related vignetting effect. The simulated images can be used to evaluate the flux limits for detection of point and extended sources, the effect of source confusion at very faint fluxes, and in general the efficiency of detection algorithms. We also simulate the spectra of the detected sources, in order to address specific science topics which are unique to WFXT. Among them, we focus on the characterization of the Intra Cluster Medium (ICM) of high-z clusters, and in particular on the measurement of the redshift from the ICM spectrum in order to build a cosmological sample of galaxy clusters. The end-to-end simulation procedure presented here, is a valuable tool in optimizing the mission design, characterizing the WFXT discovery space and verifying the connection between mission requirements and scientific goals. Thanks to this effort, we can conclude on firm basis that an X-ray mission optimized for surveys like WFXT is necessary to bring X-ray astronomy at the level of the optical, IR, submm and radio wavebands as foreseen in the coming decade.

  7. Simulant Development for LAWPS Testing

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Renee L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schonewill, Philip P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-05-23

    This report describes simulant development work that was conducted to support the technology maturation of the LAWPS facility. Desired simulant physical properties (density, viscosity, solids concentration, solid particle size), sodium concentrations, and general anion identifications were provided by WRPS. The simulant recipes, particularly a “nominal” 5.6M Na simulant, are intended to be tested at several scales, ranging from bench-scale (500 mL) to full-scale. Each simulant formulation was selected to be chemically representative of the waste streams anticipated to be fed to the LAWPS system, and used the current version of the LAWPS waste specification as a formulation basis. After simulant development iterations, four simulants of varying sodium concentration (5.6M, 6.0M, 4.0M, and 8.0M) were prepared and characterized. The formulation basis, development testing, and final simulant recipes and characterization data for these four simulants are presented in this report.

  8. Serious Simulations (for fun)

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik

    2006-01-01

    ’Serious Simulations (for fun)’ deals with a dramatic change in the area of computer games. Computer games have throughout the past decades given us the opportunity to experience, tell stories and play in virtual, computer generated worlds. Today, however, the narratives of the computer games......, their laws of physics and their rule structure not only belong to the game world. Incessantly and innovatively, they reach far beyond the game universe and into reality. The computer game today is the place where we not only escape reality, but also relate to reality – similar to the role of the movie...... in the 20th century. They have become an important part of marketing, teaching, political activism, communication and information to the public. It is the language of the future, the language for and about the reality we are living in. The game simulations are still compelling and entertaining...

  9. Black Hole Simulation

    Science.gov (United States)

    1999-01-01

    This graphic shows the computer simulation of a black hole from start to finish. Plasma is falling slowly toward the black hole in a (at the upper left). The plasma has a magnetic field, shown by the white lines. It picks up speed as it falls toward the hole in b (at the upper right), c (lower left) and d (lower right). However, the rotating black hole twists up space itself (and the magnetic field lines) and ejects electromagnetic power along the north and south poles above the black hole. The red and white color shows the immense electromagnetic power output, which eventually will pick up particles and form squirting jets. This simulation was conducted using supercomputers at Japan's National Institute for Fusion Science.

  10. Dissipative universal Lindbladian simulation

    Science.gov (United States)

    Zanardi, Paolo; Marshall, Jeffrey; Campos Venuti, Lorenzo

    2016-02-01

    It is by now well understood that quantum dissipative processes can be harnessed and turned into a resource for quantum-information processing tasks. In this paper we demonstrate yet another way in which this is true by providing a dissipation-assisted protocol for the simulation of general Markovian dynamics. More precisely, we show how a suitable coherent coupling of a quantum system to a set of Markovian dissipating qubits allows one to enact an effective Liouvillian generator of any Lindbladian form. This effective dynamical generator arises from high-order virtual-dissipative processes and governs the system dynamics exactly in the limit of infinitely fast dissipation. Applications to the simulation of collective decoherence are discussed as an illustration.

  11. Interactive CFD simulations

    OpenAIRE

    Duque Lombana, Juan Fernando

    2007-01-01

    This project is about the development of an implementable Interactive Computer Fluid Dynamics methodology -- The range of this work begins with an overview of the current status of computational fluid dynamics simulation software and methodologies, continues with an introduction to what interactive and interactivity mean, develops an all original interactive CFD methodology to follow for the solution of fluid scenarios and finally, the description of the implementation of an interactive solve...

  12. Radiation in Particle Simulations

    Energy Technology Data Exchange (ETDEWEB)

    More, R; Graziani, F; Glosli, J; Surh, M

    2010-11-19

    Hot dense radiative (HDR) plasmas common to Inertial Confinement Fusion (ICF) and stellar interiors have high temperature (a few hundred eV to tens of keV), high density (tens to hundreds of g/cc) and high pressure (hundreds of megabars to thousands of gigabars). Typically, such plasmas undergo collisional, radiative, atomic and possibly thermonuclear processes. In order to describe HDR plasmas, computational physicists in ICF and astrophysics use atomic-scale microphysical models implemented in various simulation codes. Experimental validation of the models used to describe HDR plasmas are difficult to perform. Direct Numerical Simulation (DNS) of the many-body interactions of plasmas is a promising approach to model validation but, previous work either relies on the collisionless approximation or ignores radiation. We present four methods that attempt a new numerical simulation technique to address a currently unsolved problem: the extension of molecular dynamics to collisional plasmas including emission and absorption of radiation. The first method applies the Lienard-Weichert solution of Maxwell's equations for a classical particle whose motion is assumed to be known. The second method expands the electromagnetic field in normal modes (planewaves in a box with periodic boundary-conditions) and solves the equation for wave amplitudes coupled to the particle motion. The third method is a hybrid molecular dynamics/Monte Carlo (MD/MC) method which calculates radiation emitted or absorbed by electron-ion pairs during close collisions. The fourth method is a generalization of the third method to include small clusters of particles emitting radiation during close encounters: one electron simultaneously hitting two ions, two electrons simultaneously hitting one ion, etc. This approach is inspired by the virial expansion method of equilibrium statistical mechanics. Using a combination of these methods we believe it is possible to do atomic-scale particle

  13. Edge Simulation Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Krasheninnikov, Sergei I. [Univ. of California, San Diego, CA (United States); Angus, Justin [Univ. of California, San Diego, CA (United States); Lee, Wonjae [Univ. of California, San Diego, CA (United States)

    2018-01-05

    The goal of the Edge Simulation Laboratory (ESL) multi-institutional project is to advance scientific understanding of the edge plasma region of magnetic fusion devices via a coordinated effort utilizing modern computing resources, advanced algorithms, and ongoing theoretical development. The UCSD team was involved in the development of the COGENT code for kinetic studies across a magnetic separatrix. This work included a kinetic treatment of electrons and multiple ion species (impurities) and accurate collision operators.

  14. Software Architecture Simulation

    OpenAIRE

    Mårtensson, Frans; Jönsson, Per

    2002-01-01

    A software architecture is one of the first steps towards a software system. A software architecture can be designed in different ways. During the design phase, it is important to select the most suitable design of the architecture, in order to create a good foundation for the system. The selection process is performed by evaluating architecture alternatives against each other. We investigate the use of continuous simulation of a software architecture as a support tool for architecture evalua...

  15. Bridge Crossing Simulator

    Science.gov (United States)

    2014-10-07

    support the durability testing of Military Bridging and Gap Crossing Equipment. 15. SUBJECT TERMS Bridge Crossing Simulator Trilateral Design... Trilateral Design and Test Code for Military Bridging and Gap Crossing Equipment (TDTC) 1* is derived based on the number of samples the test bridge...Automotive and Armaments Command TARDEC U.S. Army Tank-Automotive Research, Development and Engineering Center TDTC Trilateral Design and Test Code

  16. Simulation of Bremsstrahlung production

    Energy Technology Data Exchange (ETDEWEB)

    Patau, J.P.; Malbert, M.; Terrissol, M. (Centre de Physique Atomique, Toulouse (France))

    1981-10-01

    Electron slowing down and related phenomena are often greatly affected by bremsstrahlung production. Each creation of photon is individually simulated on the basis of a cross-section pack advised by Koch and Motz with corrections in the high energy frequency limit region. An accurate and fast sampling method is described. Its applicability covers a range between 50 keV and 80 MeV for target atoms whose atomic number is from 5 up to 90.

  17. Wake modeling and simulation

    DEFF Research Database (Denmark)

    Larsen, Gunner Chr.; Madsen Aagaard, Helge; Larsen, Torben J.

    We present a consistent, physically based theory for the wake meandering phenomenon, which we consider of crucial importance for the overall description of wind turbine loadings in wind farms. In its present version the model is confined to single wake situations. The model philosophy does, howev...... methodology has been implemented in the aeroelastic code HAWC2, and example simulations of wake situations, from the small Tjæreborg wind farm, have been performed showing satisfactory agreement between predictions and measurements...

  18. Exploration Supply Chain Simulation

    Science.gov (United States)

    2008-01-01

    The Exploration Supply Chain Simulation project was chartered by the NASA Exploration Systems Mission Directorate to develop a software tool, with proper data, to quantitatively analyze supply chains for future program planning. This tool is a discrete-event simulation that uses the basic supply chain concepts of planning, sourcing, making, delivering, and returning. This supply chain perspective is combined with other discrete or continuous simulation factors. Discrete resource events (such as launch or delivery reviews) are represented as organizational functional units. Continuous resources (such as civil service or contractor program functions) are defined as enabling functional units. Concepts of fixed and variable costs are included in the model to allow the discrete events to interact with cost calculations. The definition file is intrinsic to the model, but a blank start can be initiated at any time. The current definition file is an Orion Ares I crew launch vehicle. Parameters stretch from Kennedy Space Center across and into other program entities (Michaud Assembly Facility, Aliant Techsystems, Stennis Space Center, Johnson Space Center, etc.) though these will only gain detail as the file continues to evolve. The Orion Ares I file definition in the tool continues to evolve, and analysis from this tool is expected in 2008. This is the first application of such business-driven modeling to a NASA/government-- aerospace contractor endeavor.

  19. Simulating "Mars on Earth"

    Science.gov (United States)

    Clancey, William J.; Clancy, Daniel (Technical Monitor)

    2002-01-01

    By now, everyone who's heard of the Haughton-Mars Project knows that we travel to Devon Island to learn how people will live and work on Mars. But how do we learn about Mars operations from what happens in the Arctic? We must document our experience--traverses, life in the hab, instrument deployment, communications, and so on. Then we must analyze and formally model what happens. In short, while most scientists are studying the crater, other scientists must be studying the expedition itself. That's what I have done in the past four field seasons. I study field science, both as it naturally occurs at Haughton (unconstrained by a "Mars Sam") and as a constrained experiment using the Flashline Mars Arctic Research Station. During the second week of July 2001, I lived and worked in the hab as part of the Phase 2 crew of six. Besides participating in all activities, I took many photographs and time lapse video. The result of my work will be a computer simulation of how we lived and worked in the hab. It won't be a model of particular people or even my own phase per se, but a pastiche that demonstrates (a proof of concept) that we have appropriate tools for simulating the layout of the hab and daily routines followed by the group and individual scientists. Activities-how people spend their time-are the focus of my observations for building such a simulation model.

  20. The Indra Simulation Database

    Science.gov (United States)

    Falck, Bridget; Budavari, T.; Cole, S.; Crankshaw, D.; Dobos, L.; Lemson, G.; Neyrinck, M.; Szalay, A.; Wang, J.

    2011-05-01

    We present the Indra suite of cosmological N-body simulations and the design of its companion database. Indra consists of 512 different instances of a 1 Gpc/h-sided box, each with 100 million dark matter particles and the same input cosmology, enabling a characterization of very large-scale modes of the matter power spectrum with galaxy-scale mass resolution and an excellent handle on cosmic variance. Each simulation outputs 64 snapshots, giving over 100 TB of data for the full set of simulations, all of which will be loaded into a SQL database. We discuss the database design for the particle data, consisting of the positions and velocities of each particle; the FOF halos, with links to the particle data so that halo properties can be calculated within the database; and the density field on a power-of-two grid, which can be easily linked to each particle's Peano-Hilbert index. Initial performance tests and example queries will be given. The authors are grateful for support from the Gordon and Betty Moore and the W.M. Keck Foundations.

  1. Fast "coalescent" simulation

    Directory of Open Access Journals (Sweden)

    Wall Jeff D

    2006-03-01

    Full Text Available Abstract Background The amount of genome-wide molecular data is increasing rapidly, as is interest in developing methods appropriate for such data. There is a consequent increasing need for methods that are able to efficiently simulate such data. In this paper we implement the sequentially Markovian coalescent algorithm described by McVean and Cardin and present a further modification to that algorithm which slightly improves the closeness of the approximation to the full coalescent model. The algorithm ignores a class of recombination events known to affect the behavior of the genealogy of the sample, but which do not appear to affect the behavior of generated samples to any substantial degree. Results We show that our software is able to simulate large chromosomal regions, such as those appropriate in a consideration of genome-wide data, in a way that is several orders of magnitude faster than existing coalescent algorithms. Conclusion This algorithm provides a useful resource for those needing to simulate large quantities of data for chromosomal-length regions using an approach that is much more efficient than traditional coalescent models.

  2. Training by simulation

    Energy Technology Data Exchange (ETDEWEB)

    Angelini, E.

    1984-12-01

    Effective training by simulation is a matter of 1. accurate definition of the training need, 2. selecting the right hardware/software package to do the job cost effectively, 3. careful, methodical building of the training program and 4. an appropriate setting, such as a well-equipped training center. Several points seem clear: 1. ''Computer shock'' or computer phobia -- that is, fear of the simulator, can be a factor with some of the older operators. But it quickly disappears once they're into the program, and learn the versatility and the exciting dynamics of simulators. 2. Operator training is becoming more sophisticated throughout the HPI. Among other things, operators should get out into the plant to learn more about how their actions in the control room impact the plant. Operators are becoming more ''big picture'' oriented. 3. When inexperienced training instructors are used, they should attend a good ''train the trainer'' course emphasizing platform skills and instructional technology. 4. Operators need as much ''hands on'' experience with the plant's actual operating equipment as possible. The cognitive ''linkage'' between that equipment and what they see on the CRT is vitally important.

  3. Simulation of semiconductor devices

    CERN Document Server

    Oriato, D

    2001-01-01

    cathode, made using an AIGaAs heterostructure step. Simulations show the importance of the insertion of a thin highly-doped layer between the transit region and the electron launcher in order to improve device operation. Chapter 5 is an introduction to Ill-nitrides, in particular GaN and its alloy ln-GaN. We outline the discrepancy in the elastic and piezoelectric parameters found in the literature. Strain, dislocations and piezoelectricity are presented as the main features of a InGaN/GaN system. In chapter 6 an extensive simulation of the dependence of the optical band gap of a single InGaN quantum well on the piezoelectric and spontaneous polarization is reported. Quantum Confined Stark Effect and screening mechanisms are found to play a major role. The simulation of a novel InGaN/GaN double quantum well LED is presented. A wide well is used to capture electrons that tunnels in a narrow well where they recombine with holes. Resonant asymmetric tunneling of electron and holes is used to increase the efficie...

  4. Simulation and CRM.

    Science.gov (United States)

    Ostergaard, Doris; Dieckmann, Peter; Lippert, Anne

    2011-06-01

    Patients are harmed as a result of incidents. Both poor interdisciplinary communication and teamwork are contributing factors to such events. The principles of crisis resource management are meant to help prevent and manage difficulties and reflect both, the social-team-oriented and cognitive-individual-oriented aspects of human factors. This article explores the importance of human factors training for safe care of patients and the role of simulation. Based on the available literature, the need to integrate this type of training to increase awareness of the importance of human factors and to change attitudes appears obvious. A combination of different training methods appears to be useful. Simulation-based training appears to be favourable, although the number of studies demonstrating the impact of training is limited. It is important to develop training programmes for individual teams, based on the knowledge of challenges and deficiencies, and to monitor behavioural change. Several methods, including patient safety data, interviews, observational studies and simulations, can be used to specify learning objectives. The training should be established for the real team(s). Furthermore, leaders need to implement training in the organisation and establish databases to monitor the impact on patient outcome. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Simulation-based design for infrastructure system simulation

    NARCIS (Netherlands)

    Fumarola, M.; Huang, Y.; Tekinay, C.; Seck, M.D.

    2010-01-01

    Simulation models are often used to analyze the behavior and performance of infrastructure systems. The use of simulation models in multi-actor design processes is restricted to the analysis phase after conceptual designs have been completed. To use simulation models throughout the design process,

  6. Simulation Framework for Teaching in Modeling and Simulation Areas

    Science.gov (United States)

    De Giusti, Marisa Raquel; Lira, Ariel Jorge; Villarreal, Gonzalo Lujan

    2008-01-01

    Simulation is the process of executing a model that describes a system with enough detail; this model has its entities, an internal state, some input and output variables and a list of processes bound to these variables. Teaching a simulation language such as general purpose simulation system (GPSS) is always a challenge, because of the way it…

  7. Molecular Simulations in Astrobiology

    Science.gov (United States)

    Pohorille, Andrew; Wilson, Michael A.; Schweighofer, Karl; Chipot, Christophe; New, Michael H.; Vincenzi, Donald L. (Technical Monitor)

    2001-01-01

    One of the main goals of astrobiology is to understand the origin of cellular life. In the absence of any record of the earliest ancestors of contemporary cells, protocells, the most direct way to test our understanding of their characteristics is to construct laboratory models of protocells. Such efforts, currently underway in the NASA Astrobiology Program, are accompanied by computational studies aimed at explaining self-organization of simple molecules into ordered structures and developing designs of molecules that are capable of performing protocellular functions. Many of these functions, such as importing nutrients, capturing and storing energy, and responding to changes in the environment, are carried out by proteins bound to membranes. We use computer simulations to address the following, questions about these proteins: (1) How do small proteins (peptides) organize themselves into ordered structures at water-membrane interfaces and insert into membranes? (2) How do peptides aggregate to form membrane-spannin(y structures (e.g., channels)? (3) By what mechanisms do such aggregates perform their functions? The simulations are performed using the molecular dynamics (MD) method. In this method, Newton's equations of motion for each atom in the system are solved iteratively. At each time step, the forces exerted on each atom by the remaining atoms are evaluated by dividing them into two parts. Short-range forces are calculated directly in real space while long-range forces are evaluated in reciprocal space, usually using a particle-mesh algorithm which is of order O(NlnN). Currently, a time step of 2 femtoseconds is typically used, thereby making studies of problems occurring on multi-nanosecond time scales (10(exp 6) - 10(exp 8) time steps) accessible. To address a broader range of problems, simulations need to be extended by three orders of magnitude. Such an extension requires both algorithmic improvements and codes scalable to a large number of parallel

  8. Robotic Vehicle Proxy Simulation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Energid Technologies proposes the development of a digital simulation that can replace robotic vehicles in field studies. This proxy simulation will model the...

  9. Combining Narrative and Numerical Simulation

    DEFF Research Database (Denmark)

    Hansen, Mette Sanne; Ladeby, Klaes Rohde; Rasmussen, Lauge Baungaard

    2011-01-01

    Strategic simulation is the combination of narrative and numerical simulation and can be used as a tool to support strategic decision making by providing different scenarios in combination with computer modelling. The core of the combined simulation approach (CSA) is to make it possible for decis......Strategic simulation is the combination of narrative and numerical simulation and can be used as a tool to support strategic decision making by providing different scenarios in combination with computer modelling. The core of the combined simulation approach (CSA) is to make it possible...... to the decision making in operations and production management by providing new insights into modelling and simulation based on the combined narrative and numerical simulation approach as a tool for strategy making. The research question asks, “How can the CSA be applied in a practical context to support strategy...

  10. Simulating A Factory Via Software

    Science.gov (United States)

    Schroer, Bernard J.; Zhang, Shou X.; Tseng, Fan T.

    1990-01-01

    Software system generates simulation program from user's responses to questions. AMPS/PC system is simulation software tool designed to aid user in defining specifications of manufacturing environment and then automatically writing code for target simulation language, GPSS/PC. Domain of problems AMPS/PC simulates is that of manufacturing assembly lines with subassembly lines and manufacturing cells. Written in Turbo Pascal Version 4.

  11. Perfect simulation of Hawkes processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Rasmussen, Jakob Gulddahl

    their branching and conditional independence structure, useful approximations of the distribution function for the length of a cluster are derived. This is used to construct upper and lower processes for the perfect simulation algorithm. Examples of applications and empirical results are presented.......This article concerns a perfect simulation algorithm for unmarked and marked Hawkes processes. The usual stratihtforward simulation algorithm suffers from edge effects, whereas our perfect simulation algorithm does not. By viewing Hawkes processes as Poisson cluster processes and using...

  12. Simulation Activity in Otolaryngology Residencies.

    Science.gov (United States)

    Deutsch, Ellen S; Wiet, Gregory J; Seidman, Michael; Hussey, Heather M; Malekzadeh, Sonya; Fried, Marvin P

    2015-08-01

    Simulation has become a valuable tool in medical education, and several specialties accept or require simulation as a resource for resident training or assessment as well as for board certification or maintenance of certification. This study investigates current simulation resources and activities in US otolaryngology residency programs and examines interest in advancing simulation training and assessment within the specialty. Web-based survey. US otolaryngology residency training programs. An electronic web-based survey was disseminated to all US otolaryngology program directors to determine their respective institutional and departmental simulation resources, existing simulation activities, and interest in further simulation initiatives. Descriptive results are reported. Responses were received from 43 of 104 (43%) residency programs. Simulation capabilities and resources are available in most respondents' institutions (78.6% report onsite resources; 73.8% report availability of models, manikins, and devices). Most respondents (61%) report limited simulation activity within otolaryngology. Areas of simulation are broad, addressing technical and nontechnical skills related to clinical training (94%). Simulation is infrequently used for research, credentialing, or systems improvement. The majority of respondents (83.8%) expressed interest in participating in multicenter trials of simulation initiatives. Most respondents from otolaryngology residency programs have incorporated some simulation into their curriculum. Interest among program directors to participate in future multicenter trials appears high. Future research efforts in this area should aim to determine optimal simulators and simulation activities for training and assessment as well as how to best incorporate simulation into otolaryngology residency training programs. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

  13. Innovative Simulation Strategies in Education

    OpenAIRE

    Michelle Aebersold; Dana Tschannen; Melissa Bathish

    2012-01-01

    The use of simulation in the undergraduate nursing curriculum is gaining popularity and is becoming a foundation of many nursing programs. The purpose of this paper is to highlight a new simulation teaching strategy, virtual reality (VR) simulation, which capitalizes on the technological skills of the new generation student. This small-scale pilot study focused on improving interpersonal skills in senior level nursing students using VR simulation. In this study, a repeated-measure design was ...

  14. Simulation Of Cell Signaling Communications

    OpenAIRE

    Huertas González, Daniel

    2014-01-01

    Simulation of cell signaling communications using the Omnet ++ Simulation Framework and molecular dynamics algorithms. [ANGLÈS] Cells, whether they be unicellular organisms or belong to a multicellular organism, are able to encode and transmit information to each other by means of signaling molecules and the diffusion processes in the extracellular fluid. The aim of this project is to develop an Event Driven Molecular Dynamics (EDMD) simulator using the Omnet++ Simulation Framework in orde...

  15. Message-passing multiprocessor simulator

    Energy Technology Data Exchange (ETDEWEB)

    Dunigan, T.H.

    1986-05-01

    The structure and use of a message-passing multiprocessor simulator are described. The simulator provides a multitasking environment for the development of algorithms for parallel processors using either shared or local memories. The simulator may be used from C or FORTRAN and provides a library of subroutines for task control and message passing. The simulator produces a trace file that can be used for debugging, performance analysis, or graphical display. 9 refs., 7 figs.

  16. Simulation of the SAGE spectrometer

    Science.gov (United States)

    Cox, D. M.; Konki, J.; Greenlees, P. T.; Hauschild, K.; Herzberg, R.-D.; Pakarinen, J.; Papadakis, P.; Rahkila, P.; Sandzelius, M.; Sorri, J.

    2015-06-01

    The SAGE spectrometer combines a Ge-detector array with a Si detector to allow simultaneous detection of γ-rays and electrons. A comprehensive GEANT4 simulation package of the SAGE spectrometer has been developed with the ability to simulate the expected datasets based on user input files. The measured performance of the spectrometer is compared to the results obtained from the simulations.

  17. SIMULATION OF LIBRARY SYSTEM SERVICE

    Directory of Open Access Journals (Sweden)

    Olga I. Babina

    2015-01-01

    Full Text Available The paper describes the development of a simulation model of the Services system of Research Library of Library and Publishing Complex of Siberian Federal University. Discrete-event simulation and simulation software ExtendSim are used. The focus is on performance indicators of library services.

  18. Bio-threat microparticle simulants

    Science.gov (United States)

    Farquar, George Roy; Leif, Roald N

    2012-10-23

    A bio-threat simulant that includes a carrier and DNA encapsulated in the carrier. Also a method of making a simulant including the steps of providing a carrier and encapsulating DNA in the carrier to produce the bio-threat simulant.

  19. Simulation tools for future interferometers

    OpenAIRE

    Yamamoto, H.; Barton, M.; Bhawal, B.; Evans, M.; Yoshida, S

    2006-01-01

    For the design and commissioning of the LIGO interferometer, simulation tools have been used explicitly and implicitly. The requirement of the advanced LIGO interferometer is much more demanding than the first generation interferometer. Development of revised simulation tools for future interferometers are underway in the LIGO Laboratory. The outline of those simulation tools and applications are discussed.

  20. Mathematics Career Simulations: An Invitation

    Science.gov (United States)

    Sinn, Robb; Phipps, Marnie

    2013-01-01

    A simulated academic career was combined with inquiry-based learning in an upper-division undergraduate mathematics course. Concepts such as tenure, professional conferences and journals were simulated. Simulation procedures were combined with student-led, inquiry-based classroom formats. A qualitative analysis (ethnography) describes the culture…

  1. Simulation for the social scientist

    National Research Council Canada - National Science Library

    Gilbert, G. Nigel; Troitzsch, Klaus G

    2005-01-01

    ... sciences. Simulation for the Social Scientist is a practical textbook on the techniques of building computer simulations to assist understanding of social and economic issues and problems. This authoritative book details all the common approaches to social simulation to provide social scientists with an appreciation of the literature and allow those w...

  2. Redesigned Human Metabolic Simulator

    Science.gov (United States)

    Duffield, Bruce; Jeng, Frank; Lange, Kevin

    2008-01-01

    A design has been formulated for a proposed improved version of an apparatus that simulates atmospheric effects of human respiration by introducing controlled amounts of carbon dioxide, water vapor, and heat into the air. Denoted a human metabolic simulator (HMS), the apparatus is used for testing life-support equipment when human test subjects are not available. The prior version of the HMS, to be replaced, was designed to simulate the respiratory effects of as many as four persons. It exploits the catalytic combustion of methyl acetate, for which the respiratory quotient (the molar ratio of carbon dioxide produced to oxygen consumed) is very close to the human respiratory quotient of about 0.86. The design of the improved HMS provides for simulation of the respiratory effects of as many as eight persons at various levels of activity. The design would also increase safety by eliminating the use of combustion. The improved HMS (see figure) would include a computer that would exert overall control. The computer would calculate the required amounts of oxygen removal, carbon dioxide addition, water addition, and heat addition by use of empirical equations for metabolic profiles of respiration and heat. A blower would circulate air between the HMS and a chamber containing a life-support system to be tested. With the help of feedback from a mass flowmeter, the blower speed would be adjusted to regulate the rate of flow according to the number of persons to be simulated and to a temperature-regulation requirement (the air temperature would indirectly depend on the rate of flow, among other parameters). Oxygen would be removed from the circulating air by means of a commercially available molecular sieve configured as an oxygen concentrator. Oxygen, argon, and trace amounts of nitrogen would pass through a bed in the molecular sieve while carbon dioxide, the majority of nitrogen, and other trace gases would be trapped by the bed and subsequently returned to the chamber. If

  3. Advances in Intelligent Modelling and Simulation Simulation Tools and Applications

    CERN Document Server

    Oplatková, Zuzana; Carvalho, Marco; Kisiel-Dorohinicki, Marek

    2012-01-01

    The human capacity to abstract complex systems and phenomena into simplified models has played a critical role in the rapid evolution of our modern industrial processes and scientific research. As a science and an art, Modelling and Simulation have been one of the core enablers of this remarkable human trace, and have become a topic of great importance for researchers and practitioners. This book was created to compile some of the most recent concepts, advances, challenges and ideas associated with Intelligent Modelling and Simulation frameworks, tools and applications. The first chapter discusses the important aspects of a human interaction and the correct interpretation of results during simulations. The second chapter gets to the heart of the analysis of entrepreneurship by means of agent-based modelling and simulations. The following three chapters bring together the central theme of simulation frameworks, first describing an agent-based simulation framework, then a simulator for electrical machines, and...

  4. Plasma Simulation Program

    Energy Technology Data Exchange (ETDEWEB)

    Greenwald, Martin

    2011-10-04

    Many others in the fusion energy and advanced scientific computing communities participated in the development of this plan. The core planning team is grateful for their important contributions. This summary is meant as a quick overview the Fusion Simulation Program's (FSP's) purpose and intentions. There are several additional documents referenced within this one and all are supplemental or flow down from this Program Plan. The overall science goal of the DOE Office of Fusion Energy Sciences (FES) Fusion Simulation Program (FSP) is to develop predictive simulation capability for magnetically confined fusion plasmas at an unprecedented level of integration and fidelity. This will directly support and enable effective U.S. participation in International Thermonuclear Experimental Reactor (ITER) research and the overall mission of delivering practical fusion energy. The FSP will address a rich set of scientific issues together with experimental programs, producing validated integrated physics results. This is very well aligned with the mission of the ITER Organization to coordinate with its members the integrated modeling and control of fusion plasmas, including benchmarking and validation activities. [1]. Initial FSP research will focus on two critical Integrated Science Application (ISA) areas: ISA1, the plasma edge; and ISA2, whole device modeling (WDM) including disruption avoidance. The first of these problems involves the narrow plasma boundary layer and its complex interactions with the plasma core and the surrounding material wall. The second requires development of a computationally tractable, but comprehensive model that describes all equilibrium and dynamic processes at a sufficient level of detail to provide useful prediction of the temporal evolution of fusion plasma experiments. The initial driver for the whole device model will be prediction and avoidance of discharge-terminating disruptions, especially at high performance, which are a

  5. Binaural room simulation

    Science.gov (United States)

    Lehnert, H.; Blauert, Jens; Pompetzki, W.

    1991-01-01

    In every-day listening the auditory event perceived by a listener is determined not only by the sound signal that a sound emits but also by a variety of environmental parameters. These parameters are the position, orientation and directional characteristics of the sound source, the listener's position and orientation, the geometrical and acoustical properties of surfaces which affect the sound field and the sound propagation properties of the surrounding fluid. A complete set of these parameters can be called an Acoustic Environment. If the auditory event perceived by a listener is manipulated in such a way that the listener is shifted acoustically into a different acoustic environment without moving himself physically, a Virtual Acoustic Environment has been created. Here, we deal with a special technique to set up nearly arbitrary Virtual Acoustic Environments, the Binaural Room Simulation. The purpose of the Binaural Room Simulation is to compute the binaural impulse response related to a virtual acoustic environment taking into account all parameters mentioned above. One possible way to describe a Virtual Acoustic Environment is the concept of the virtual sound sources. Each of the virtual sources emits a certain signal which is correlated but not necessarily identical with the signal emitted by the direct sound source. If source and receiver are non moving, the acoustic environment becomes a linear time-invariant system. Then, the Binaural Impulse Response from the source to a listener' s eardrums contains all relevant auditory information related to the Virtual Acoustic Environment. Listening into the simulated environment can easily be achieved by convolving the Binaural Impulse Response with dry signals and representing the results via headphones.

  6. Febrile Seizure Simulation

    Directory of Open Access Journals (Sweden)

    Victor Cisneros

    2017-01-01

    Full Text Available Audience: This simulation session is appropriate for medical students, community physicians, or residents in emergency medicine, neurology, pediatrics, or family medicine. Introduction: Febrile seizures are the most common form of seizures in childhood; they are thought to occur in 2-5% of all children.1-3 Febrile seizures are defined as a seizure in association with a febrile illness in children without a central nervous system infection, previous afebrile seizure, known brain disorder, or electrolyte abnormalities. 1,2 They typically occur between 6 months and 18 months of age though they can occur up to 5 years of age.3 Febrile seizures are categorized as: simple (generalized seizure lasting less than 15 minutes in a child aged 6 months to 5 years, and less than 1 in a 24 hour period or complex (a focal seizure or generalized seizure lasting greater than 15 minutes, or multiple seizures in a 24 hour period. 1,3 Treatment for febrile seizures is based on treating the underlying cause of the fever and giving reassurance and education to the parents.2 Mortality is extremely rare, and there is no difference in the patient’s cognitive abilities after a febrile seizure, even when the seizure is prolonged.1 Objectives: At the end of this simulation session, the learner will be able to: 1 discuss the management of febrile seizures 2 discuss when placement of an advanced airway is indicated in the management of a febrile seizure 3 list the risk factors for febrile seizures 4 prepare a differential diagnosis for the causes of febrile seizures 5 educate family members on febrile seizures. Methods: This educational session is a high-fidelity simulation.

  7. SAR Simulations & Safety.

    Science.gov (United States)

    Fiedler, Thomas M; Ladd, Mark E; Bitz, Andreas K

    2017-03-20

    At ultra-high fields, the assessment of radiofrequency (RF) safety presents several new challenges compared to low-field systems. Multi-channel RF transmit coils in combination with parallel transmit techniques produce time-dependent and spatially varying power loss densities in the tissue. Further, in ultra-high-field systems, localized field effects can be more pronounced due to a transition from the quasi stationary to the electromagnetic field regime. Consequently, local information on the RF field is required for reliable RF safety assessment as well as for monitoring of RF exposure during MR examinations. Numerical RF and thermal simulations for realistic exposure scenarios with anatomical body models are currently the only practical way to obtain the requisite local information on magnetic and electric field distributions as well as tissue temperature. In this article, safety regulations and the fundamental characteristics of RF field distributions in ultra-high-field systems are reviewed. Numerical methods for computation of RF fields as well as typical requirements for the analysis of realistic multi-channel RF exposure scenarios including anatomical body models are highlighted. In recent years, computation of the local tissue temperature has become of increasing interest, since a more accurate safety assessment is expected because temperature is directly related to tissue damage. Regarding thermal simulation, bio-heat transfer models and approaches for taking into account the physiological response of the human body to RF exposure are discussed. In addition, suitable methods are presented to validate calculated RF and thermal results with measurements. Finally, the concept of generalized simulation-based specific absorption rate (SAR) matrix models is discussed. These models can be incorporated into local SAR monitoring in multi-channel MR systems and allow the design of RF pulses under constraints for local SAR. Copyright © 2017 Elsevier Inc. All rights

  8. SEALING SIMULATED LEAKS

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Romano

    2004-09-01

    This report details the testing equipment, procedures and results performed under Task 7.2 Sealing Simulated Leaks. In terms of our ability to seal leaks identified in the technical topical report, Analysis of Current Field Data, we were 100% successful. In regards to maintaining seal integrity after pigging operations we achieved varying degrees of success. Internal Corrosion defects proved to be the most resistant to the effects of pigging while External Corrosion proved to be the least resistant. Overall, with limitations, pressure activated sealant technology would be a viable option under the right circumstances.

  9. Simulation 󈨔 Symposium.

    Science.gov (United States)

    1980-11-21

    a.m. Plenary Session II Dr. Frohberg (FRG) The International Linkage of Open Exchange Models for World Food Supply (Invited Lecture) 10:00 - 10:30...Marchis (Italy) Modeling and Identification of a Counterflow Heat Exchanger 3:00 - 3:20 p.m. A. Bonnemay (France) Utilisation do systhmes algibro...Switzerland Stockage de chaleur faible profondeur: Simulation par elements finis 3:40 - 4:00 p.m. A. Rizk Abu El-Wafa / M. Tawfik / M.S. Mansour (Egypt) Digital

  10. Simulated metaphors of love

    DEFF Research Database (Denmark)

    Möring, Sebastian Martin

    2014-01-01

    Recently several games about love relationships have been published, such as The Marriage (Humble 2006, see figure 1), Love (Contrebasse 2010, see figure 2) and My Divorce (Douville 2010). At first play they do not really reveal what they are about, as they are semiotically abstract, i...... drawn from the field of rhetoric between literal and non-literal speech, of which the latter is often referred to as being metaphorical. Thus, one can say there seem to exist two different kinds of games: (a) detailed, realistic and mimetic simulations and (b) abstract and non-realistic metaphors...

  11. RPC gamma sensitivity simulation

    CERN Document Server

    Altieri, S; Bruno, G; Gianini, G; Merlo, M; Ratti, S P; Riccardi, C; Torre, P; Viola, L; Vitulo, P; Abbrescia, M; Colaleo, A; Iaselli, Giuseppe; Loddo, F; Maggi, M; Marangelli, B; Natali, S; Nuzzo, S; Pugliese, G; Ranieri, A; Romano, F; Salvemini, A

    2000-01-01

    A method to simulate resistive plate chambers (RPCs) gamma sensitivity has been developed using a Monte Carlo code. The sensitivity has been evaluated as a function of the gamma energy in the range 0.1-100 MeV and for different spectra. To evaluate the response of the detector in a Large Hadron Collider (LHC) background environment the gamma energy spectrum expected in the CMS muon barrel has been taken into account and the RPC gamma sensitivity evaluated as a function of the detector size. (3 refs).

  12. Semiconductor device physics and simulation

    CERN Document Server

    Yuan, J S

    1998-01-01

    This volume provides thorough coverage of modern semiconductor devices -including hetero- and homo-junction devices-using a two-dimensional simulator (MEDICI) to perform the analysis and generate simulation results Each device is examined in terms of dc, ac, and transient simulator results; relevant device physics; and implications for design and analysis Two hundred forty-four useful figures illustrate the physical mechanisms and characteristics of the devices simulated Comprehensive and carefully organized, Semiconductor Device Physics and Simulation is the ideal bridge from device physics to practical device design

  13. Simulators for the Internet of Things

    OpenAIRE

    LAHARNAR, BORIS

    2016-01-01

    The thesis delivers an extensive review of free and open-source simulation tools useful for IoT simulation. The work deals with free simulators and other tools and sources applicable to simulation of IoT use cases. Roughly 80 tools and other sources were reviewed. Different application domain simulators were enlisted (smart home, connected vehicles, smart city, smart grid, UAV...), network simulators, WSN simulators, discrete event simulators, virtualization tools, emulators and simulators of...

  14. Pellet plant energy simulator

    Science.gov (United States)

    Bordeasu, D.; Vasquez Pulido, T.; Nielsen, C.

    2016-02-01

    The Pellet Plant energy simulator is a software based on advanced algorithms which has the main purpose to see the response of a pellet plant regarding certain location conditions. It combines energy provided by a combined heat and power, and/or by a combustion chamber with the energy consumption of the pellet factory and information regarding weather conditions in order to predict the biomass consumption of the pellet factory together with the combined heat and power, and/or with the biomass consumption of the combustion chamber. The user of the software will not only be able to plan smart the biomass acquisition and estimate its cost, but also to plan smart the preventive maintenance (charcoal cleaning in case of a gasification plant) and use the pellet plant at the maximum output regarding weather conditions and biomass moisture. The software can also be used in order to execute a more precise feasibility study for a pellet plant in a certain location. The paper outlines the algorithm that supports the Pellet Plant Energy Simulator idea and presents preliminary tests results that supports the discussion and implementation of the system

  15. Reactor Simulator Testing Overview

    Science.gov (United States)

    Schoenfeld, Michael P.

    2013-01-01

    Test Objectives Summary: a) Verify operation of the core simulator, the instrumentation & control system, and the ground support gas and vacuum test equipment. b) Examine cooling & heat regeneration performance of the cold trap purification. c) Test the ALIP pump at voltages beyond 120V to see if the targeted mass flow rate of 1.75 kg/s can be obtained in the RxSim. Testing Highlights: a) Gas and vacuum ground support test equipment performed effectively for operations (NaK fill, loop pressurization, and NaK drain). b) Instrumentation & Control system effectively controlled loop temperature and flow rates or pump voltage to targeted settings and ramped within prescribed constraints. It effectively interacted with reactor simulator control model and defaulted back to temperature control mode if the transient fluctuations didn't dampen. c) Cold trap design was able to obtain the targeted cold temperature of 480 K. An outlet temperature of 636 K was obtained which was lower than the predicted 750 K but 156 K higher than the minimum temperature indicating the design provided some heat regeneration. d) ALIP produce a maximum flow rate of 1.53 kg/s at 800 K when operated at 150 V and 53 Hz.

  16. Reactor Simulator Testing

    Science.gov (United States)

    Schoenfeld, Michael P.; Webster, Kenny L.; Pearson, Boise J.

    2013-01-01

    As part of the Nuclear Systems Office Fission Surface Power Technology Demonstration Unit (TDU) project, a reactor simulator test loop (RxSim) was design & built to perform integrated testing of the TDU components. In particular, the objectives of RxSim testing was to verify the operation of the core simulator, the instrumentation and control system, and the ground support gas and vacuum test equipment. In addition, it was decided to include a thermal test of a cold trap purification design and a pump performance test at pump voltages up to 150 V since the targeted mass flow rate of 1.75 kg/s was not obtained in the RxSim at the originally constrained voltage of 120 V. This paper summarizes RxSim testing. The gas and vacuum ground support test equipment performed effectively in NaK fill, loop pressurization, and NaK drain operations. The instrumentation and control system effectively controlled loop temperature and flow rates or pump voltage to targeted settings. The cold trap design was able to obtain the targeted cold temperature of 480 K. An outlet temperature of 636 K was obtained which was lower than the predicted 750 K but 156 K higher than the cold temperature indicating the design provided some heat regeneration. The annular linear induction pump (ALIP) tested was able to produce a maximum flow rate of 1.53 kg/s at 800 K when operated at 150 V and 53 Hz.

  17. Confidence in Numerical Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Hemez, Francois M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-02-23

    This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to “forecast,” that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists “think.” This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. “Confidence” derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.

  18. Physics-Based Simulator for NEO Exploration Analysis & Simulation

    Science.gov (United States)

    Balaram, J.; Cameron, J.; Jain, A.; Kline, H.; Lim, C.; Mazhar, H.; Myint, S.; Nayar, H.; Patton, R.; Pomerantz, M.; hide

    2011-01-01

    As part of the Space Exploration Analysis and Simulation (SEAS) task, the National Aeronautics and Space Administration (NASA) is using physics-based simulations at NASA's Jet Propulsion Laboratory (JPL) to explore potential surface and near-surface mission operations at Near Earth Objects (NEOs). The simulator is under development at JPL and can be used to provide detailed analysis of various surface and near-surface NEO robotic and human exploration concepts. In this paper we describe the SEAS simulator and provide examples of recent mission systems and operations concepts investigated using the simulation. We also present related analysis work and tools developed for both the SEAS task as well as general modeling, analysis and simulation capabilites for asteroid/small-body objects.

  19. Numerical simulation of welding

    DEFF Research Database (Denmark)

    Hansen, Jan Langkjær; Thorborg, Jesper

    Aim of project:To analyse and model the transient thermal field from arc welding (SMAW, V-shaped buttweld in 15mm plate) and to some extend the mechanical response due to the thermal field. - To implement this model in a general purpose finite element program such as ABAQUS.The simulation...... stress is also taken into account.Work carried out:With few means it is possible to define a thermal model which describes the thermal field from the welding process in reasonable agreement with reality. Identical results are found with ABAQUS and Rosenthal’s analytical solution of the governing heat...... transfer equation under same conditions. It is relative easy tointroduce boundary conditions such as convection and radiation where not surprisingly the radiation has the greatest influence especially from the high temperature regions in the weld pool and the heat affected zone.Due to the large temperature...

  20. Phobos Mobility Simulation

    Science.gov (United States)

    Bielski, Paul

    2015-01-01

    Phobos, the larger of Mars' moons, provides a potential staging location for human exploration of the Martian surface. Its low gravity (about 1/200th of Earth) and lack of atmosphere makes it an attractive destination before a more complex human landing on Mars is attempted. While easier to approach and depart than Mars itself, Phobos provides unique challenges to visiting crews. It is irregularly shaped, so its local gravitational field does not always point straight down with respect to the visible horizon. It is very close to Mars and tidally locked, so the Martian gravity gradient and applied acceleration greatly affect the perceived surface gravity direction and magnitude. This simulation allows the assessment of unique mobility approaches on the surface of Phobos, including hopping in particular.

  1. Memory Circuit Fault Simulator

    Science.gov (United States)

    Sheldon, Douglas J.; McClure, Tucker

    2013-01-01

    Spacecraft are known to experience significant memory part-related failures and problems, both pre- and postlaunch. These memory parts include both static and dynamic memories (SRAM and DRAM). These failures manifest themselves in a variety of ways, such as pattern-sensitive failures, timingsensitive failures, etc. Because of the mission critical nature memory devices play in spacecraft architecture and operation, understanding their failure modes is vital to successful mission operation. To support this need, a generic simulation tool that can model different data patterns in conjunction with variable write and read conditions was developed. This tool is a mathematical and graphical way to embed pattern, electrical, and physical information to perform what-if analysis as part of a root cause failure analysis effort.

  2. Wind shear and turbulence simulation

    Science.gov (United States)

    Bowles, Roland L.

    1987-01-01

    The aviation community is increasing its reliance on flight simulators. This is true both in pilot training and in research and development. In moving research concepts through the development pipeline, there is a sequence of events which take place: analysis, ground based simulation, inflight simulation, and flight testing. Increasing fidelity as progress toward the flight testing arena is accompanied by increasing cost. The question that seems to be posed in relation to the meteorological aspects of flight simulation is, How much fidelity is enough and can it be quantified. As a part of the Langley Simulation Technology Program, there are three principal areas of focus, one being improved simulation of weather hazards. A close liaison with the JAWS project was established because of the Langley Simulation Technology interests regarding reliable simulation of severe convective weather phenomena and their impact on aviation systems. Simulation offers the only feasible approach for examining the utility of new technology and new procedures for coping with severe convective weather phenomena such as wind shear. These simulation concepts are discussed in detail.

  3. Performance limitations of parallel simulations

    Directory of Open Access Journals (Sweden)

    Liang Chen

    1998-01-01

    Full Text Available This study shows how the performance of a parallel simulation may be affected by the structure of the system being simulated. We consider a wide class of “linearly synchronous” simulations consisting of asynchronous and synchronous parallel simulations (or other distributed-processing systems, with conservative or optimistic protocols, in which the differences in the virtual times of the logical processes being simulated in real time t are of the order o(t as t tends to infinity. Using a random time transformation idea, we show how a simulation's processing rate in real time is related to the throughput rates in virtual time of the system being simulated. This relation is the basis for establishing upper bounds on simulation processing rates. The bounds for the rates are tight and are close to the actual rates as numerical experiments indicate. We use the bounds to determine the maximum number of processors that a simulation can effectively use. The bounds also give insight into efficient assignment of processors to the logical processes in a simulation.

  4. Simulations of Titan's paleoclimate

    Science.gov (United States)

    Lora, Juan M.; Lunine, Jonathan I.; Russell, Joellen L.; Hayes, Alexander G.

    2014-11-01

    We investigate the effects of varying Saturn's orbit on the atmospheric circulation and surface methane distribution of Titan. Using a new general circulation model of Titan's atmosphere, we simulate its climate under four characteristic configurations of orbital parameters that correspond to snapshots over the past 42 kyr, capturing the amplitude range of long-period cyclic variations in eccentricity and longitude of perihelion. The model, which covers pressures from the surface to 0.5 mbar, reproduces the present-day temperature profile and tropospheric superrotation. In all four simulations, the atmosphere efficiently transports methane poleward, drying out the low- and mid-latitudes, indicating that these regions have been desert-like for at least tens of thousands of years. Though circulation patterns are not significantly different, the amount of surface methane that builds up over either pole strongly depends on the insolation distribution; in the present-day, methane builds up preferentially in the north, in agreement with observations, where summer is milder but longer. The same is true, to a lesser extent, for the configuration 14 kyr ago, while the south pole gains more methane in the case for 28 kyr ago, and the system is almost symmetric 42 kyr ago. This confirms the hypothesis that orbital forcing influences the distribution of surface liquids, and that the current observed asymmetry could have been partially or fully reversed in the past. The evolution of the orbital forcing implies that the surface reservoir is transported on timescales of ∼30 kyr, in which case the asymmetry reverses with a period of ∼125 kyr. Otherwise, the orbital forcing does not produce a net asymmetry over longer timescales, and is not a likely mechanism for generating the observed dichotomy.

  5. Communication Systems Simulation Laboratory (CSSL): Simulation Planning Guide

    Science.gov (United States)

    Schlesinger, Adam

    2012-01-01

    The simulation process, milestones and inputs are unknowns to first-time users of the CSSL. The Simulation Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

  6. Eternity Variables to Prove Simulation of Specifications

    NARCIS (Netherlands)

    Hesselink, Wim H.

    2005-01-01

    Simulations of specifications are introduced as a unification and generalization of refinement mappings, history variables, forward simulations, prophecy variables, and backward simulations. A specification implements another specification if and only if there is a simulation from the first one to

  7. [Clinical Simulation and Emotional Learning].

    Science.gov (United States)

    Afanador, Adalberto Amaya

    2012-01-01

    At present, the clinical simulation has been incorporated into medical school curriculum. It is considered that the simulation is useful to develop skills, and as such its diffusion. Within the acquisition of skills, meaningful learning is an essential emotional component for the student and this point is essential to optimize the results of the simulation experience. Narrative description on the subject of simulation and the degree of "emotionality." The taxonomy is described for the types of clinical simulation fidelity and correlates it with the degree of emotionality required to achieve significant and lasting learning by students. It is essential to take into account the student's level of emotion in the learning process through simulation strategy. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  8. Hybrid Simulation of Composite Structures

    DEFF Research Database (Denmark)

    Høgh, Jacob Herold

    Hybrid simulation is a substructural method combining a numerical simulation with a physical experiment. A structure is thereby simulated under the assumption that a substructure’s response is well known and easily modelled while a given substructure is studied more accurately in a physical...... of freedom. In this dissertation the main focus is to develop hybrid simulation for composite structures e.g. wind turbine blades where the boundary between the numerical model and the physical experiment is continues i.e. in principal infinite amount of degrees of freedom. This highly complicates...... the transfer system and the control and monitoring techniques in the shared boundary is therefore a key issue in this type of hybrid simulation. During the research, hybrid simulation platforms have been programmed capable of running on different time scales with advanced control and monitoring techniques...

  9. HADES, A Radiographic Simulation Code

    Energy Technology Data Exchange (ETDEWEB)

    Aufderheide, M.B.; Slone, D.M.; Schach von Wittenau, A.E.

    2000-08-18

    We describe features of the HADES radiographic simulation code. We begin with a discussion of why it is useful to simulate transmission radiography. The capabilities of HADES are described, followed by an application of HADES to a dynamic experiment recently performed at the Los Alamos Neutron Science Center. We describe quantitative comparisons between experimental data and HADES simulations using a copper step wedge. We conclude with a short discussion of future work planned for HADES.

  10. Simulation of the SAGE spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Cox, D.M.; Herzberg, R.D. [University of Liverpool, Department of Physics, Oliver Lodge Laboratory, Liverpool (United Kingdom); Konki, J.; Greenlees, P.T.; Pakarinen, J.; Papadakis, P.; Rahkila, P.; Sandzelius, M.; Sorri, J. [University of Jyvaeskylae, Department of Physics, Jyvaeskylae (Finland); Hauschild, K. [Universite Paris-Sud, CSNSM-IN2P3-CNRS, Orsay (France)

    2015-06-15

    The SAGE spectrometer combines a Ge-detector array with a Si detector to allow simultaneous detection of γ-rays and electrons. A comprehensive GEANT4 simulation package of the SAGE spectrometer has been developed with the ability to simulate the expected datasets based on user input files. The measured performance of the spectrometer is compared to the results obtained from the simulations. (orig.)

  11. Hearthstone simulátor

    OpenAIRE

    Strupek, Martin

    2017-01-01

    Title: Hearthstone simulator Author: Martin Strupek Department: Department of Software and Computer Science Education Supervisor: Mgr. Jakub Gemrot, Department of Software and Computer Science Education Abstract: The goal of this work was creation of a Hearthstone simulator in C# which would open possibilities for analyzing quality of decks and tactics with the use of artificial intelligence as well as easy implementation of new cards and game rules. Our simulator implements mechanics and car...

  12. Notes on modeling and simulation

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-10

    These notes present a high-level overview of how modeling and simulation are carried out by practitioners. The discussion is of a general nature; no specific techniques are examined but the activities associated with all modeling and simulation approaches are briefly addressed. There is also a discussion of validation and verification and, at the end, a section on why modeling and simulation are useful.

  13. The Psychiatry Consult Adventure Simulation

    OpenAIRE

    Jachna, John S.; Powsner, Seth M.; McIntyre, Patrick J.; Byck, Robert S.

    1989-01-01

    Evaluating patients on medical and surgical wards for psychiatric problems can be an adventure, from determining the actual reason for the consult request, to finding the medical records and actually interviewing the patient. The PsyConsult Adventure Simulation adapts the excitement of computer adventure game simulations to teaching general hospital psychiatric consultation. The trainee, in the role of a senior medical student, must navigate a simulated hospital environment and deal with mult...

  14. Simulation Model of a Transient

    DEFF Research Database (Denmark)

    Jauch, Clemens; Sørensen, Poul; Bak-Jensen, Birgitte

    2005-01-01

    This paper describes the simulation model of a controller that enables an active-stall wind turbine to ride through transient faults. The simulated wind turbine is connected to a simple model of a power system. Certain fault scenarios are specified and the turbine shall be able to sustain operation...... in case of such faults. The design of the controller is described and its performance assessed by simulations. The control strategies are explained and the behaviour of the turbine discussed....

  15. Simulation Aided Product Software Development

    OpenAIRE

    Hyvönen, Jani

    2010-01-01

    This work is a study of simulation environments as tools for product software development from architecture definition phase to testing the actual end product software code. The purpose of the work was to find a feasible way to utilize simulation environments for improving product time to market. The work was initiated to renew the existing simulation methods to correspond the demands of the present-day process of developing products. Work effort mainly consisted of studying the e...

  16. Simulation and Emuliation in NCTUns

    Directory of Open Access Journals (Sweden)

    Antanas Vindašius

    2011-03-01

    Full Text Available The features of NCTUns simulation environment are presented along with developed models, showing the advantages of this simulation tool. NCTUns gives the ability to reuse kernel TCP/IP stack and therefore to simplify and speedup the simulations, also to make use of any UNIX commands or programs. Presented wireless multihop transmission model for delay and jitter investigation, also wireless multihop video transmission model. Model, employing emulation, enables to evaluate the impact of simulated network not only on flow characteristics, but also on live application reception.Article in Lithuanian

  17. Perfect simulation of Hawkes processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Rasmussen, Jakob Gulddahl

    2005-01-01

    their branching and conditional independence structures, useful approximations of the distribution function for the length of a cluster are derived. This is used to construct upper and lower processes for the perfect simulation algorithm. A tail-lightness condition turns out to be of importance......Our objective is to construct a perfect simulation algorithm for unmarked and marked Hawkes processes. The usual straightforward simulation algorithm suffers from edge effects, whereas our perfect simulation algorithm does not. By viewing Hawkes processes as Poisson cluster processes and using...

  18. Training and Simulation in Otolaryngology

    Science.gov (United States)

    Wiet, Gregory J.; Stredney, Don; Wan, Dinah

    2011-01-01

    This article focuses on key issues surrounding the needs and application of simulation technologies for technical skills training in otolaryngology. The discussion includes an overview of key topics in training and learning, the application of these issues in simulation environments, and the subsequent applications of these simulation environments to the field of otolaryngology. Examples of past applications are presented, with discussion of how the interplay of cultural changes in surgical training in general, along with the rapid advancements in technology have shaped and influenced their adoption and adaptation. The authors conclude with emerging trends and potential influences advanced simulation and training will have on technical skills training in otolaryngology. PMID:22032486

  19. Security simulation for vulnerability assessment

    Science.gov (United States)

    Hennessey, Brian; Norman, Bradley; Wesson, Robert B.

    2006-05-01

    This paper discusses simulation technologies developed to "stimulate" an operational command and control security system. The paper discusses simulation techniques used to create a virtual model of a facility in which to conduct vulnerability assessment exercises, performance benchmarking, CONOPS development and operator training. The paper discusses the specific techniques used for creating a 3d virtual environment and simulating streaming IP surveillance cameras and motion detection sensors. In addition the paper discusses advanced scenario creation techniques and the modeling of scenario entities, including vehicles, aircraft and personnel. The paper draws parallels with lessons learned in using Air Traffic Control simulators for operator training, incident recreation, procedure development and pre acquisition planning and testing.

  20. Fast simulation of ultrasound images

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt; Nikolov, Svetoslav

    2000-01-01

    Realistic B-mode and flow images can be simulated with scattering maps based on optical, CT, or MR images or parametric flow models. The image simulation often includes using 200,000 to 1 million point scatterers. One image line typically takes 1800 seconds to compute on a state-of-the-art PC...... be split among a number of PCs for speeding up the simulation. A full 3D one second volume simulation then takes 7,500 seconds on a 32 CPU 600 MHz Pentium III PC cluster....

  1. Scorching heat and numerical simulation; Canicule et simulation numerique

    Energy Technology Data Exchange (ETDEWEB)

    Deque, M

    2007-07-01

    A simulation of 140 years has been realized with ARPEGE-climat using the hypothesis of the increase of the greenhouse effect gases, of the scenario called A2 by the GIEC. The summer temperature observed at Pais and simulated between 1960 and 2003, as the average temperature in France are presented and discussed. (A.L.B.)

  2. Discrete Event Simulation Computers can be used to simulate the ...

    Indian Academy of Sciences (India)

    IAS Admin

    Department of Computer. Science and Automation. Indian Institute of Science. Bangalore 560 012. Email: mjt@csa.iisc.ernet.in. Computers can be used to simulate the operation of complex systems and thereby study their performance. This article introduces you to the technique of discrete event simulation through a simple ...

  3. Effective Use of Simulation Means in Collective Mission Simulation

    NARCIS (Netherlands)

    Voogd, J.M.; Lemmers, A.; Gerretsen, A.; Roza, M.; Karelse, R.

    2009-01-01

    Mission training and rehearsal are vital to successful operations. Advances in modeling and simulation (M&S) technology now allow for Collective Mission Simulation (CMS). The Royal Netherlands Armed Forces have exploited CMS through participation in a number of virtual exercises. The potential of

  4. Simulating publication bias

    DEFF Research Database (Denmark)

    Paldam, Martin

    are made by data variation, while the model is the same. It appears that SR0 generates narrow funnels much at odds with observed funnels, while the other four funnels look more realistic. SR1 to SR4 give the mean a substantial bias that confirms the prior causing the bias. The FAT-PET MRA works well......Economic research typically runs J regressions for each selected for publication – it is often selected as the ‘best’ of the regressions. The paper examines five possible meanings of the word ‘best’: SR0 is ideal selection with no bias; SR1 is polishing: selection by statistical fit; SR2...... is censoring: selection by the size of estimate; SR3 selects the optimal combination of fit and size; and SR4 selects the first satisficing result. The last four SRs are steered by priors and result in bias. The MST and the FAT-PET have been developed for detection and correction of such bias. The simulations...

  5. Least Squared Simulated Errors

    Directory of Open Access Journals (Sweden)

    Peter J. Veazie

    2015-03-01

    Full Text Available Estimation by minimizing the sum of squared residuals is a common method for parameters of regression functions; however, regression functions are not always known or of interest. Maximizing the likelihood function is an alternative if a distribution can be properly specified. However, cases can arise in which a regression function is not known, no additional moment conditions are indicated, and we have a distribution for the random quantities, but maximum likelihood estimation is difficult to implement. In this article, we present the least squared simulated errors (LSSE estimator for such cases. The conditions for consistency and asymptotic normality are given. Finite sample properties are investigated via Monte Carlo experiments on two examples. Results suggest LSSE can perform well in finite samples. We discuss the estimator’s limitations and conclude that the estimator is a viable option. We recommend Monte Carlo investigation of any given model to judge bias for a particular finite sample size of interest and discern whether asymptotic approximations or resampling techniques are preferable for the construction of tests or confidence intervals.

  6. GRB Simulations in GLAST

    Energy Technology Data Exchange (ETDEWEB)

    Omodei, Nicola; /INFN, Pisa; Battelino, Milan; /Stockholm Observ.; Komin, Nukri; /Montpellier U.; Longo, Francesco; /INFN, Trieste /Trieste U.; McEnery, Julie; /NASA, Goddard; Ryde, Felix; /Denver U.

    2007-10-22

    The Gamma-ray Large Area Space Telescope (GLAST), scheduled to be launched in fall of 2007, is the next generation satellite for high-energy gamma-ray astronomy. The Large Area Telescope (LAT) is a pair conversion telescope built with a high precision silicon tracker, a segmented CsI electromagnetic calorimeter and a plastic anticoincidence shield. The LAT will survey the sky in the energy range between 20 MeV to more than 300 GeV, shedding light on many issues left open by its highly successful predecessor EGRET. LAT will observe Gamma-Ray Bursts (GRB) in an energy range never explored before; to tie these frontier observations to the better-known properties at lower energies, a second instrument, the GLAST Burst Monitor (GBM) will provide important spectra and timing in the 10 keV to 30 MeV range. We briefly present the instruments onboard the GLAST satellite, their synergy in the GRB observations and the work done so far by the collaboration in simulation, analysis, and GRB sensitivity estimation.

  7. Thermoforming simulation with FEA

    Energy Technology Data Exchange (ETDEWEB)

    Luca, P. de [Engineering Systems International SA, Rungis (France); Pickett, A.K. [T. Queckboerner Engineering Systems International GmbH, Eschborn (Germany); Johnson, A.F. [DLR, Stuttgart (Germany)

    1996-09-01

    This article describes how the ability to produce high-quality, lightweight structural parts quickly with complex shapes promises to make thermoforming competitive with conventional metal-stamping methods. Thermoforming--the press-forming of continuous fiber-reinforced-thermoplastic (FRTP) sheets--is a promising option for fabricating lightweight structural composite components. Thermoplastic polymers offer improved mechanical and physical properties compared with thermoset polymers, and perhaps most important for industry, they make rapid part production possible using the press-forming process. Despite its promise, thermoforming has not been used to its full potential because tool designers generally rely on trial and error to obtain a detailed understanding of how well this process lends itself to producing a particular part. Because trial-and-error methods are costly and inefficient, tool designers typically cannot gain the sophisticated understanding of the process needed to optimize it for the particular part at hand. Recent advances in the finite-element method may make it easier for tool designers to obtain the insights that have typically come from trial and error. An explicit finite-element code has been developed to simulate the thermoforming process, thereby enabling tool designers to experiment on a computer. The codes use detailed temperature-dependent rheological models to account for intraply shearing, squeeze flow, fiber reorientation, and fiber buckling. They also rely on advanced friction laws--both temperature- and pressure-dependent--to account for the interply sliding mechanism between plies.

  8. Simulation of UAV Systems

    Directory of Open Access Journals (Sweden)

    P. Kaňovský

    2005-01-01

    Full Text Available The study described in this paper deals with the issue of a design tool for the autopilot of an Unmanned Aerial Vehicle (UAV and the selection of the airdata and inertial system sensors. This project was processed in cooperation with VTUL a PVO o.z. [1]. The feature that distinguishes the autopilot requirements of a UAV (Figs. 1, 7, 8 from the flight systems of conventional manned aircraft is the paradox of controlling a high bandwidth dynamical system using sensors that are in harmony with the low cost low weight objectives that UAV designs are often expected to achieve. The principal function of the autopilot is flight stability, which establishes the UAV as a stable airborne platform that can operate at a precisely defined height. The main sensor for providing this height information is a barometric altimeter. The solution to the UAV autopilot design was realised with simulations using the facilities of Matlab® and in particular Simulink®[2]. 

  9. Simulated Associating Polymer Networks

    Science.gov (United States)

    Billen, Joris

    Telechelic associating polymer networks consist of polymer chains terminated by endgroups that have a different chemical composition than the polymer backbone. When dissolved in a solution, the endgroups cluster together to form aggregates. At low temperature, a strongly connected reversible network is formed and the system behaves like a gel. Telechelic networks are of interest since they are representative for biopolymer networks (e.g. F-actin) and are widely used in medical applications (e.g. hydrogels for tissue engineering, wound dressings) and consumer products (e.g. contact lenses, paint thickeners). In this thesis such systems are studied by means of a molecular dynamics/Monte Carlo simulation. At first, the system in rest is studied by means of graph theory. The changes in network topology upon cooling to the gel state, are characterized. Hereto an extensive study of the eigenvalue spectrum of the gel network is performed. As a result, an in-depth investigation of the eigenvalue spectra for spatial ER, scale-free, and small-world networks is carried out. Next, the gel under the application of a constant shear is studied, with a focus on shear banding and the changes in topology under shear. Finally, the relation between the gel transition and percolation is discussed.

  10. MJO Simulation Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Waliser, D; Sperber, K; Hendon, H; Kim, D; Maloney, E; Wheeler, M; Weickmann, K; Zhang, C; Donner, L; Gottschalck, J; Higgins, W; Kang, I; Legler, D; Moncrieff, M; Schubert, S; Stern, W; Vitart, F; Wang, B; Wang, W; Woolnough, S

    2008-06-02

    The Madden-Julian Oscillation (MJO) interacts with, and influences, a wide range of weather and climate phenomena (e.g., monsoons, ENSO, tropical storms, mid-latitude weather), and represents an important, and as yet unexploited, source of predictability at the subseasonal time scale. Despite the important role of the MJO in our climate and weather systems, current global circulation models (GCMs) exhibit considerable shortcomings in representing this phenomenon. These shortcomings have been documented in a number of multi-model comparison studies over the last decade. However, diagnosis of model performance has been challenging, and model progress has been difficult to track, due to the lack of a coherent and standardized set of MJO diagnostics. One of the chief objectives of the US CLIVAR MJO Working Group is the development of observation-based diagnostics for objectively evaluating global model simulations of the MJO in a consistent framework. Motivation for this activity is reviewed, and the intent and justification for a set of diagnostics is provided, along with specification for their calculation, and illustrations of their application. The diagnostics range from relatively simple analyses of variance and correlation, to more sophisticated space-time spectral and empirical orthogonal function analyses. These diagnostic techniques are used to detect MJO signals, to construct composite life-cycles, to identify associations of MJO activity with the mean state, and to describe interannual variability of the MJO.

  11. Error coding simulations

    Science.gov (United States)

    Noble, Viveca K.

    1993-11-01

    There are various elements such as radio frequency interference (RFI) which may induce errors in data being transmitted via a satellite communication link. When a transmission is affected by interference or other error-causing elements, the transmitted data becomes indecipherable. It becomes necessary to implement techniques to recover from these disturbances. The objective of this research is to develop software which simulates error control circuits and evaluate the performance of these modules in various bit error rate environments. The results of the evaluation provide the engineer with information which helps determine the optimal error control scheme. The Consultative Committee for Space Data Systems (CCSDS) recommends the use of Reed-Solomon (RS) and convolutional encoders and Viterbi and RS decoders for error correction. The use of forward error correction techniques greatly reduces the received signal to noise needed for a certain desired bit error rate. The use of concatenated coding, e.g. inner convolutional code and outer RS code, provides even greater coding gain. The 16-bit cyclic redundancy check (CRC) code is recommended by CCSDS for error detection.

  12. Simulators and the simulation environment: getting the balance right in simulation-based surgical education.

    Science.gov (United States)

    Sadideen, Hazim; Hamaoui, Karim; Saadeddin, Munir; Kneebone, Roger

    2012-01-01

    Simulation occupies a central position in surgical education. It offers a safe environment for trainees to develop and improve their skills through sustained deliberate self-practice and appropriate feedback. This review explores the role of simulators and the simulation environment in light of educational theory to promote effective learning. Information was obtained from peer-reviewed publications, books and online material. A simplistic perspective frames simulation as a means of gaining technical skills on basic models by offering a safe alternative to carrying out procedures on real patients. Although necessary, that aspect of simulation requires greater depth to satisfy the growing demand for alternatives to traditional clinical learning. A more realistic view should frame simulation as a means to gaining mastery within a complex clinical world. In order to strike the balance on simulating an ideal clinical scenario, alignment of the simulator and the simulation environment in the appropriate context appears crucial. Copyright © 2012 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

  13. A European Social Simulation Association

    NARCIS (Netherlands)

    Moss, S

    This is a proposal to form a European Social Simulation Association (ESSA). ESSA is intended to coordinate with similar organisations in North America, Latin America and Australasia and other regions to organise an international federation to support the development of social simulation research,

  14. Telematics Simulation: Recent Developments & Issues.

    Science.gov (United States)

    Sutherland, Janet; Ekker, Knut; Morgan, Konrad; Crookall, David; Carbonell, Amparo Garcia

    Recent developments in Internet technologies have enabled new, more flexible forms of telematic simulation and have raised issues that were not considered in the early days of networked learning. Ultimately, these questions revolve around: (1) the learning cost-effectiveness of telematic simulation (quality and quantity of learning as opposed to…

  15. Quantum CPU and Quantum Simulating

    OpenAIRE

    Wang, An Min

    1999-01-01

    Making use of an universal quantum network or QCPU proposed by me [6], some special quantum networks for simulating some quantum systems are given out. Specially, it is obtained that the quantum network for the time evolution operator which can simulate, in general, Schr\\"odinger equation.

  16. Fel simulations using distributed computing

    NARCIS (Netherlands)

    Einstein, J.; Biedron, S.G.; Freund, H.P.; Milton, S.V.; Van Der Slot, P. J M; Bernabeu, G.

    2016-01-01

    While simulation tools are available and have been used regularly for simulating light sources, including Free-Electron Lasers, the increasing availability and lower cost of accelerated computing opens up new opportunities. This paper highlights a method of how accelerating and parallelizing code

  17. Aerodynamic Simulation of Indoor Flight

    Science.gov (United States)

    De Leon, Nelson; De Leon, Matthew N.

    2007-01-01

    We develop a two-dimensional flight simulator for lightweight (less than 10 g) indoor planes. The simulator consists of four coupled time differential equations describing the plane CG, plane pitch and motor. The equations are integrated numerically with appropriate parameters and initial conditions for two planes: (1) Science Olympiad and (2)…

  18. Bridging experiments, models and simulations

    DEFF Research Database (Denmark)

    Carusi, Annamaria; Burrage, Kevin; Rodríguez, Blanca

    2012-01-01

    electrophysiology. Our analysis reveals that models, simulations, and experiments are intertwined, in an assemblage that is a system itself, namely the model-simulation-experiment (MSE) system. We argue that validation is part of the whole MSE system and is contingent upon 1) understanding and coping with sources...

  19. Fluid simulation for computer graphics

    CERN Document Server

    Bridson, Robert

    2008-01-01

    Animating fluids like water, smoke, and fire using physics-based simulation is increasingly important in visual effects, in particular in movies, like The Day After Tomorrow, and in computer games. This book provides a practical introduction to fluid simulation for graphics. The focus is on animating fully three-dimensional incompressible flow, from understanding the math and the algorithms to the actual implementation.

  20. Teaching Spatial Autocorrelation by Simulation.

    Science.gov (United States)

    Griffith, Daniel A.

    1987-01-01

    Describes a computer simulation game that helps teach spatial autocorrelation, a fundamental geographic concept referring to the degree and kind of spatial patterning to be found in geographic data. Experiences with this simulation exercise at the State University of New York Buffalo are briefly summarized. (Author/BSR)

  1. Model Calibration for Ship Simulations

    NARCIS (Netherlands)

    E.F.G. van Daalen (Ed); J. Fehribach; T. van Leeuwen (Tristan); C. Reinhardt; N. Schenkels; R. Sheombarsing

    2014-01-01

    htmlabstractModel calibration is an important aspect in ship simulation. Here, ship motion is described by an ODE which includes tuning parameters that capture complex physical processes such as friction of the hull. In order for the simulations to be realistic for a wide range of

  2. Model Calibration for Ship Simulations

    NARCIS (Netherlands)

    van Daalen, Ed; Fehribach, Joseph; van Leeuwen, Tristan; Reinhardt, Christian; Schenkels, Nick; Sheombarsing, Ray

    2014-01-01

    Model calibration is an important aspect in ship simulation. Here, ship motion is described by an ODE which includes tuning parameters that capture complex physical processes such as friction of the hull. In order for the simulations to be realistic for a wide range of scenarios these tuning

  3. Massively parallel quantum computer simulator

    NARCIS (Netherlands)

    De Raedt, K.; Michielsen, K.; De Raedt, H.; Trieu, B.; Arnold, G.; Richter, M.; Lippert, Th.; Watanabe, H.; Ito, N.

    2007-01-01

    We describe portable software to simulate universal quantum computers on massive parallel Computers. We illustrate the use of the simulation software by running various quantum algorithms on different computer architectures, such as a IBM BlueGene/L, a IBM Regatta p690+, a Hitachi SR11000/J1, a Cray

  4. Understanding the Marketplace: A Simulation

    Science.gov (United States)

    Vickers, Carole A.

    1978-01-01

    Describes a marketplace simulation game to help students understand the role of competition and the rationale behind buying and selling food and restaurant services. Cutouts (given in the article) are used to simulate elements in the game. Emphasis is on making decisions in business operation and consumer purchases. (MF)

  5. Electric/Hybrid Vehicle Simulation

    Science.gov (United States)

    Slusser, R. A.; Chapman, C. P.; Brennand, J. P.

    1985-01-01

    ELVEC computer program provides vehicle designer with simulation tool for detailed studies of electric and hybrid vehicle performance and cost. ELVEC simulates performance of user-specified electric or hybrid vehicle under user specified driving schedule profile or operating schedule. ELVEC performs vehicle design and life cycle cost analysis.

  6. Approximate simulation of Hawkes processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Rasmussen, Jakob Gulddahl

    This article concerns a simulation algorithm for unmarked and marked Hawkes processes. The algorithm suffers from edge effects but is much faster than the perfect simulation algorithm introduced in our previous work. We derive various useful measures for the error committed when using the algorithm...

  7. Peacebuilding with Games and Simulations

    Science.gov (United States)

    Brynen, Rex; Milante, Gary

    2013-01-01

    Simulations and games can offer valuable insight into the management of conflict and the achievement of peace. This special symposium issue of "Simulation & Gaming" examines several such approaches, used in both educational settings and to prepare practitioners to deal with the concrete challenges of peacebuilding. In the introduction, the authors…

  8. Radio Relics in Cosmological Simulations

    Indian Academy of Sciences (India)

    Radio relics have been discovered in many galaxy clusters. They are believed to trace shock fronts induced by cluster mergers. Cosmological simulations allow us to study merger shocks in detail since the intra-cluster medium is heated by shock dissipation. Using high resolution cosmological simulations, identifying shock ...

  9. Conducting Simulation Studies in Psychometrics

    Science.gov (United States)

    Feinberg, Richard A.; Rubright, Jonathan D.

    2016-01-01

    Simulation studies are fundamental to psychometric discourse and play a crucial role in operational and academic research. Yet, resources for psychometricians interested in conducting simulations are scarce. This Instructional Topics in Educational Measurement Series (ITEMS) module is meant to address this deficiency by providing a comprehensive…

  10. Defense Modeling and Simulation Initiative

    Science.gov (United States)

    1992-05-01

    an artificial battlefield created by computer-based simulation software. The most important constraint associated with this type of simulators is the...techniques for improving on this situation, which draw on artificial intelligence, mathematical programming, and simpler operations research methods...algoriims, data structwres for real-time represenmion and modeling • Develop a global hierarchy ofinn erable environmental models - Develop inteligent

  11. FEL Simulation Using Distributed Computing

    Energy Technology Data Exchange (ETDEWEB)

    Einstein, Joshua [Fermilab; Bernabeu Altayo, Gerard [Fermilab; Biedron, Sandra [Ljubljana U.; Freund, Henry [Colorado State U., Fort Collins; Milton, Stephen [Colorado State U., Fort Collins; van der Slot, Peter [Colorado State U., Fort Collins

    2016-06-01

    While simulation tools are available and have been used regularly for simulating light sources, the increasing availability and lower cost of GPU-based processing opens up new opportunities. This poster highlights a method of how accelerating and parallelizing code processing through the use of COTS software interfaces.

  12. Simulations of chemical catalysis

    Science.gov (United States)

    Smith, Gregory K.

    This dissertation contains simulations of chemical catalysis in both biological and heterogeneous contexts. A mixture of classical, quantum, and hybrid techniques are applied to explore the energy profiles and compare possible chemical mechanisms both within the context of human and bacterial enzymes, as well as exploring surface reactions on a metal catalyst. A brief summary of each project follows. Project 1 - Bacterial Enzyme SpvC The newly discovered SpvC effector protein from Salmonella typhimurium interferes with the host immune response by dephosphorylating mitogen-activated protein kinases (MAPKs) with a beta-elimination mechanism. The dynamics of the enzyme substrate complex of the SpvC effector is investigated with a 3.2 ns molecular dynamics simulation, which reveals that the phosphorylated peptide substrate is tightly held in the active site by a hydrogen bond network and the lysine general base is positioned for the abstraction of the alpha hydrogen. The catalysis is further modeled with density functional theory (DFT) in a truncated active-site model at the B3LYP/6-31 G(d,p) level of theory. The truncated model suggested the reaction proceeds via a single transition state. After including the enzyme environment in ab initio QM/MM studies, it was found to proceed via an E1cB-like pathway, in which the carbanion intermediate is stabilized by an enzyme oxyanion hole provided by Lys104 and Tyr158 of SpvC. Project 2 - Human Enzyme CDK2 Phosphorylation reactions catalyzed by kinases and phosphatases play an indispensable role in cellular signaling, and their malfunctioning is implicated in many diseases. Ab initio quantum mechanical/molecular mechanical studies are reported for the phosphoryl transfer reaction catalyzed by a cyclin-dependent kinase, CDK2. Our results suggest that an active-site Asp residue, rather than ATP as previously proposed, serves as the general base to activate the Ser nucleophile. The corresponding transition state features a

  13. Advances in social simulation 2015

    CERN Document Server

    Verbrugge, Rineke; Flache, Andreas; Roo, Gert; Hoogduin, Lex; Hemelrijk, Charlotte

    2017-01-01

    This book highlights recent developments in the field, presented at the Social Simulation 2015 conference in Groningen, The Netherlands. It covers advances both in applications and methods of social simulation. Societal issues addressed range across complexities in economic systems, opinion dynamics and civil violence, changing mobility patterns, different land-use, transition in the energy system, food production and consumption, ecosystem management and historical processes. Methodological developments cover how to use empirical data in validating models in general, formalization of behavioral theory in agent behavior, construction of artificial populations for experimentation, replication of models, and agent-based models that can be run in a web browser. Social simulation is a rapidly evolving field. Social scientists are increasingly interested in social simulation as a tool to tackle the complex non-linear dynamics of society. Furthermore, the software and hardware tools available for social simulation ...

  14. Projective simulation for artificial intelligence

    Science.gov (United States)

    Briegel, Hans J.; de Las Cuevas, Gemma

    2012-05-01

    We propose a model of a learning agent whose interaction with the environment is governed by a simulation-based projection, which allows the agent to project itself into future situations before it takes real action. Projective simulation is based on a random walk through a network of clips, which are elementary patches of episodic memory. The network of clips changes dynamically, both due to new perceptual input and due to certain compositional principles of the simulation process. During simulation, the clips are screened for specific features which trigger factual action of the agent. The scheme is different from other, computational, notions of simulation, and it provides a new element in an embodied cognitive science approach to intelligent action and learning. Our model provides a natural route for generalization to quantum-mechanical operation and connects the fields of reinforcement learning and quantum computation.

  15. Simulation visualization through dynamic instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Bisset, K.R.

    1998-09-01

    The goal of the instrument composition system is to allow a simulation user to dynamically create instruments as a simulation executes. Instruments can include graphical displays, data collectors, and debugging aides. Instruments are made up of small building blocks which can be easily combined into larger, more complex instruments. Through the sue of an Attribute Server (a distributed publication/subscription mechanism), the actors and instruments in a simulation can interact without direct knowledge of each other. Instead, each actor publishes the attributes which it has available. An instrument subscribes to the attributes in which it is interested, and is notified whenever the value of one of these attribute changes. An instrument can also publish attributes for use by other instruments. Since the Attribute Server is distributed, the publisher of an attribute need not execute on the same machine as the subscriber. This allows CPU intensive data visualization to execute on separate machines from the simulation, minimizing the impact on the simulation.

  16. Simulation of multivariate diffusion bridges

    DEFF Research Database (Denmark)

    Bladt, Mogens; Finch, Samuel; Sørensen, Michael

    We propose simple methods for multivariate diffusion bridge simulation, which plays a fundamental role in simulation-based likelihood and Bayesian inference for stochastic differential equations. By a novel application of classical coupling methods, the new approach generalizes a previously...... proposed simulation method for one-dimensional bridges to the mulit-variate setting. First a method of simulating approzimate, but often very accurate, diffusion bridges is proposed. These approximate bridges are used as proposal for easily implementable MCMC algorithms that produce exact diffusion bridges....... The new method is much more generally applicable than previous methods. Another advantage is that the new method works well for diffusion bridges in long intervals because the computational complexity of the method is linear in the length of the interval. In a simulation study the new method performs well...

  17. Hardware-Accelerated Simulated Radiography

    Energy Technology Data Exchange (ETDEWEB)

    Laney, D; Callahan, S; Max, N; Silva, C; Langer, S; Frank, R

    2005-08-04

    We present the application of hardware accelerated volume rendering algorithms to the simulation of radiographs as an aid to scientists designing experiments, validating simulation codes, and understanding experimental data. The techniques presented take advantage of 32-bit floating point texture capabilities to obtain solutions to the radiative transport equation for X-rays. The hardware accelerated solutions are accurate enough to enable scientists to explore the experimental design space with greater efficiency than the methods currently in use. An unsorted hexahedron projection algorithm is presented for curvilinear hexahedral meshes that produces simulated radiographs in the absorption-only regime. A sorted tetrahedral projection algorithm is presented that simulates radiographs of emissive materials. We apply the tetrahedral projection algorithm to the simulation of experimental diagnostics for inertial confinement fusion experiments on a laser at the University of Rochester.

  18. Design education with simulation games

    DEFF Research Database (Denmark)

    Juuti, Tero; Lehtonen, Timo; Hansen, Poul H. Kyvsgård

    2008-01-01

    " This paper is a report on the use of simulation games in design education. Our objective was to find solution to the question: "How to do design education effectively and efficiently for hundreds of people with minimum resources?" In the paper the learning theories are described in short. Our...... focus is to describe observations and recommendations for people who have similar challenge. In the end we have discussion about the drawbacks of the learning method. Two different simulation games were used; one with university students and another with industrial people. At university quantitative...... data was gathered from exams and the results were analysed. Especially the learning of low grade exam students was impressive when using simulation game. The data from industry is based on observations while using simulation game. The results were that each of the workshop, game, and simulation...

  19. DeepSimulator: a deep simulator for Nanopore sequencing

    KAUST Repository

    Li, Yu

    2017-12-23

    Motivation: Oxford Nanopore sequencing is a rapidly developed sequencing technology in recent years. To keep pace with the explosion of the downstream data analytical tools, a versatile Nanopore sequencing simulator is needed to complement the experimental data as well as to benchmark those newly developed tools. However, all the currently available simulators are based on simple statistics of the produced reads, which have difficulty in capturing the complex nature of the Nanopore sequencing procedure, the main task of which is the generation of raw electrical current signals. Results: Here we propose a deep learning based simulator, DeepSimulator, to mimic the entire pipeline of Nanopore sequencing. Starting from a given reference genome or assembled contigs, we simulate the electrical current signals by a context-dependent deep learning model, followed by a base-calling procedure to yield simulated reads. This workflow mimics the sequencing procedure more naturally. The thorough experiments performed across four species show that the signals generated by our context-dependent model are more similar to the experimentally obtained signals than the ones generated by the official context-independent pore model. In terms of the simulated reads, we provide a parameter interface to users so that they can obtain the reads with different accuracies ranging from 83% to 97%. The reads generated by the default parameter have almost the same properties as the real data. Two case studies demonstrate the application of DeepSimulator to benefit the development of tools in de novo assembly and in low coverage SNP detection. Availability: The software can be accessed freely at: https://github.com/lykaust15/DeepSimulator.

  20. Simulation Basics: How to Conduct a High-Fidelity Simulation.

    Science.gov (United States)

    Willhaus, Janet

    2016-02-01

    Well-planned and conducted health care simulation scenarios provide opportunities for staff development in areas such as communication, patient care, and teamwork. Consideration of resources, the location for the training, preparation of learners, and use of either a high-fidelity mannequin or a trained actor (eg, a standardized patient) are all part of the operational attentions needed to conduct a simulation training scenario. In order for participants to meet training objectives, the execution of the simulation session must be both planned and purposeful.

  1. Design of simulation-based medical education and advantages and disadvantages of in situ simulation versus off-site simulation

    NARCIS (Netherlands)

    Sorensen, J.L.; Ostergaard, D.; Leblanc, V.; Ottesen, B.; Konge, L.; Dieckmann, P.; Vleuten, C. van der

    2017-01-01

    BACKGROUND: Simulation-based medical education (SBME) has traditionally been conducted as off-site simulation in simulation centres. Some hospital departments also provide off-site simulation using in-house training room(s) set up for simulation away from the clinical setting, and these activities

  2. Fast Calorimeter Simulation in ATLAS

    CERN Document Server

    Schaarschmidt, Jana; The ATLAS collaboration

    2017-01-01

    Producing the very large samples of simulated events required by many physics and performance studies with the ATLAS detector using the full GEANT4 detector simulation is highly CPU intensive. Fast simulation tools are a useful way of reducing CPU requirements when detailed detector simulations are not needed. During the LHC Run-1, a fast calorimeter simulation (FastCaloSim) was successfully used in ATLAS. FastCaloSim provides a simulation of the particle energy response at the calorimeter read-out cell level, taking into account the detailed particle shower shapes and the correlations between the energy depositions in the various calorimeter layers. It is interfaced to the standard ATLAS digitization and reconstruction software, and it can be tuned to data more easily than GEANT4. It is 500 times faster than full simulation in the calorimeter system. Now an improved version of FastCaloSim is in development, incorporating the experience with the version used during Run-1. The new FastCaloSim makes use of mach...

  3. Reversible simulation of irreversible computation

    Science.gov (United States)

    Li, Ming; Tromp, John; Vitányi, Paul

    1998-09-01

    Computer computations are generally irreversible while the laws of physics are reversible. This mismatch is penalized by among other things generating excess thermic entropy in the computation. Computing performance has improved to the extent that efficiency degrades unless all algorithms are executed reversibly, for example by a universal reversible simulation of irreversible computations. All known reversible simulations are either space hungry or time hungry. The leanest method was proposed by Bennett and can be analyzed using a simple ‘reversible’ pebble game. The reachable reversible simulation instantaneous descriptions (pebble configurations) of such pebble games are characterized completely. As a corollary we obtain the reversible simulation by Bennett and, moreover, show that it is a space-optimal pebble game. We also introduce irreversible steps and give a theorem on the tradeoff between the number of allowed irreversible steps and the memory gain in the pebble game. In this resource-bounded setting the limited erasing needs to be performed at precise instants during the simulation. The reversible simulation can be modified so that it is applicable also when the simulated computation time is unknown.

  4. Dynamic fault simulation of wind turbines using commercial simulation tools

    DEFF Research Database (Denmark)

    Lund, Torsten; Eek, Jarle; Uski, Sanna

    2005-01-01

    This paper compares the commercial simulation tools: PSCAD/EMTDC, PowerFactory, SIMPOW and PSS/E for analysing fault sequences defined in the Danish grid code requirements for wind turbines connected to a voltage level below 100 kV. Both symmetrical and unsymmetrical faults are analysed. The devi......This paper compares the commercial simulation tools: PSCAD/EMTDC, PowerFactory, SIMPOW and PSS/E for analysing fault sequences defined in the Danish grid code requirements for wind turbines connected to a voltage level below 100 kV. Both symmetrical and unsymmetrical faults are analysed....... The deviations and the reasons for the deviations between the tools are stated. The simulation models are imple-mented using the built-in library components of the simulation tools with exception of the mechanical drive-train model, which had to be user-modeled in PowerFactory and PSS/E....

  5. BEST: Biochemical Engineering Simulation Technology

    Energy Technology Data Exchange (ETDEWEB)

    1996-01-01

    The idea of developing a process simulator that can describe biochemical engineering (a relatively new technology area) was formulated at the National Renewable Energy Laboratory (NREL) during the late 1980s. The initial plan was to build a consortium of industrial and U.S. Department of Energy (DOE) partners to enhance a commercial simulator with biochemical unit operations. DOE supported this effort; however, before the consortium was established, the process simulator industry changed considerably. Work on the first phase of implementing various fermentation reactors into the chemical process simulator, ASPEN/SP-BEST, is complete. This report will focus on those developments. Simulation Sciences, Inc. (SimSci) no longer supports ASPEN/SP, and Aspen Technology, Inc. (AspenTech) has developed an add-on to its ASPEN PLUS (also called BioProcess Simulator [BPS]). This report will also explain the similarities and differences between BEST and BPS. ASPEN, developed by the Massachusetts Institute of Technology for DOE in the late 1970s, is still the state-of-the-art chemical process simulator. It was selected as the only simulator with the potential to be easily expanded into the biochemical area. ASPEN/SP, commercially sold by SimSci, was selected for the BEST work. SimSci completed work on batch, fed-batch, and continuous fermentation reactors in 1993, just as it announced it would no longer commercially support the complete ASPEN/SP product. BEST was left without a basic support program. Luckily, during this same time frame, AspenTech was developing a biochemical simulator with its version of ASPEN (ASPEN PLUS), which incorporates most BEST concepts. The future of BEST will involve developing physical property data and models appropriate to biochemical systems that are necessary for good biochemical process design.

  6. Simulator Sickness in the AH-1S (Cobra) Flight Simulator

    Science.gov (United States)

    1989-09-01

    USAARL Report No. 89-20 N I Simulator Sickness in the AH-1S (Cobra) Flight Simulator By Daniel W. Gower, Jr. Biodynamics Research Division and...adhered to AR 70-25 and USAMRDC Reg 70-25 on Use of Volunteers in Research. Reviewed: DANIEL WGOEJR. LTC, MS Director, Biodynamics search Division Re...Bus Trips------------------------------ $ wines Hammock.%---------------- - Gymnastic Aparatus-------------------------- Roller/Ice Skatinz Elevators

  7. Stochastic modeling analysis and simulation

    CERN Document Server

    Nelson, Barry L

    1995-01-01

    A coherent introduction to the techniques for modeling dynamic stochastic systems, this volume also offers a guide to the mathematical, numerical, and simulation tools of systems analysis. Suitable for advanced undergraduates and graduate-level industrial engineers and management science majors, it proposes modeling systems in terms of their simulation, regardless of whether simulation is employed for analysis. Beginning with a view of the conditions that permit a mathematical-numerical analysis, the text explores Poisson and renewal processes, Markov chains in discrete and continuous time, se

  8. Rainfall simulation for environmental application

    Energy Technology Data Exchange (ETDEWEB)

    Shriner, D.S.; Abner, C.H.; Mann, L.K.

    1977-08-01

    Rain simulation systems have been designed for field and greenhouse studies which have the capability of reproducing the physical and chemical characteristics of natural rainfall. The systems permit the simulation of variations in rainfall and droplet size similar to that of natural precipitation. The systems are completely automatic and programmable, allowing unattended operation for periods of up to one week, and have been used to expose not only vegetation but also soils and engineering materials, making them versatile tools for studies involving simulated precipitation.

  9. GNS3 network simulation guide

    CERN Document Server

    Welsh, Chris

    2013-01-01

    GNS3 Network Simulation Guide is an easy-to-follow yet comprehensive guide which is written in a tutorial format helping you grasp all the things you need for accomplishing your certification or simulation goal. If you are a networking professional who wants to learn how to simulate networks using GNS3, this book is ideal for you. The introductory examples within the book only require minimal networking knowledge, but as the book progresses onto more advanced topics, users will require knowledge of TCP/IP and routing.

  10. Visualization and Simulation in Scheduling

    Directory of Open Access Journals (Sweden)

    R. Čapek

    2008-01-01

    Full Text Available This paper deals with the representation of scheduling results and it introduces a new tool for visualization and simulation in time scheduling called VISIS. The purpose of this tool is to provide an environment for visualization, e.g. in production line scheduling. The simulation also proposes a way to simulate the influence of a schedule on a user defined system, e.g. for designing filters in digital signal processing. VISIS arises from representing scheduling results using the well-known Gantt chart. The application is implemented in the Matlab programming environment using Simulink and the Virtual Reality toolbox. 

  11. Thermal Kinetics of Glass Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Corrales, Louis R.; Du, Jincheng

    2005-08-01

    Different glass quenching algorithms are used to create simulated silica glass and their effect on the final glass structure is determined. The most distinct changes are seen to occur in the medium-range structure, specifically in the population of the different ring sizes. Some differences in the number of defects formed are also observed. The implications are that modified glass forming algorithms create glasses that are at least as good as traditional simulated glass forming methods. The objective of using modified glass forming algorithms are to understand quenching rates of simulations in comparison to quenching rates of macroscopic real systems.

  12. Simulating Others' Realities: Insiders Reflect on Disability Simulations.

    Science.gov (United States)

    Leo, Jennifer; Goodwin, Donna

    2016-04-01

    The purpose of this interpretative phenomenological analysis study was to explore the meaning persons who experience disability ascribed to disability simulations as a pedagogical tool. Reflective writing, one-on-one interviews, and field notes were used to gather information on disability simulation use in a required postsecondary kinesiology course. Seven people who use wheelchairs full time (3 men, 4 women), ranging in age from 28 to 44 yr (average age = 36) shared their perspectives. The thematic analysis revealed 3 themes. The theme "Disability Mentors Required" revealed the participants' collective questioning of their absence from the design and implementation of disability simulations. "Life Is Not a Simulation" illustrated the juxtaposition of disability reality and disability simulations. "Why Are They Laughing?" contrasted the use of fun as a strategy to engage students against the risk of distracting them from deeper reflection. Through the lens of ableism, the importance of disability representation in the development and implementation of disability simulations was affirmed as a means to deepen pedagogical reflexiveness of their intended use.

  13. Design of simulation-based medical education and advantages and disadvantages of in situ simulation versus off-site simulation

    DEFF Research Database (Denmark)

    Sørensen, Jette Led; Østergaard, Doris; LeBlanc, Vicki

    2017-01-01

    BACKGROUND: Simulation-based medical education (SBME) has traditionally been conducted as off-site simulation in simulation centres. Some hospital departments also provide off-site simulation using in-house training room(s) set up for simulation away from the clinical setting, and these activities...... simulations. DISCUSSION: Non-randomised studies argue that in situ simulation is more effective for educational purposes than other types of simulation settings. Conversely, the few comparison studies that exist, either randomised or retrospective, show that choice of setting does not seem to influence...... individual or team learning. However, hospital department-based simulations, such as in-house simulation and in situ simulation, lead to a gain in organisational learning. To our knowledge no studies have compared announced and unannounced in situ simulation. The literature suggests some improved...

  14. Adaptive Sampling in Hierarchical Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Knap, J; Barton, N R; Hornung, R D; Arsenlis, A; Becker, R; Jefferson, D R

    2007-07-09

    We propose an adaptive sampling methodology for hierarchical multi-scale simulation. The method utilizes a moving kriging interpolation to significantly reduce the number of evaluations of finer-scale response functions to provide essential constitutive information to a coarser-scale simulation model. The underlying interpolation scheme is unstructured and adaptive to handle the transient nature of a simulation. To handle the dynamic construction and searching of a potentially large set of finer-scale response data, we employ a dynamic metric tree database. We study the performance of our adaptive sampling methodology for a two-level multi-scale model involving a coarse-scale finite element simulation and a finer-scale crystal plasticity based constitutive law.

  15. Diving and Environmental Simulation Team

    Data.gov (United States)

    Federal Laboratory Consortium — The Diving and Environmental Simulation Team focuses on ways to optimize the performance and safety of Navy divers. Our goal is to increase mission effectiveness by...

  16. Approximate simulation of Hawkes processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Rasmussen, Jakob Gulddahl

    2006-01-01

    Hawkes processes are important in point process theory and its applications, and simulation of such processes are often needed for various statistical purposes. This article concerns a simulation algorithm for unmarked and marked Hawkes processes, exploiting that the process can be constructed...... as a Poisson cluster process. The algorithm suffers from edge effects but is much faster than the perfect simulation algorithm introduced in our previous work Møller and Rasmussen (2004). We derive various useful measures for the error committed when using the algorithm, and we discuss various empirical...... results for the algorithm compared with perfect simulations. Extensions of the algorithm and the results to more general types of marked point processes are also discussed....

  17. Electronic Concepts Simulation Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The laboratory utilizes state-of-the-art digital models and simulations of both friendly and enemy airborne and ground-based weapon and command and control systems....

  18. ASPECTS ABOUT SIMULATED MODEL TRUSTINESS

    Directory of Open Access Journals (Sweden)

    CRISAN DANIELA ALEXANDRA

    2009-05-01

    Full Text Available Nowadays, grace of computing possibilities that electronic computers offer and namely, big memory volume and computing speed, there is the improving of modeling methods, an important role having complex system modeling using simulation techniques. These o

  19. Robotic Vehicle Proxy Simulation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Energid Technologies proposes the development of a digital simulation to replace robotic vehicles in field studies. It will model the dynamics, terrain interaction,...

  20. Multidiscipline simulation of elastic manipulators

    Directory of Open Access Journals (Sweden)

    T. Rølvåg

    1992-10-01

    Full Text Available This paper contributes to multidiscipline simulation of elastic robot manipulators in FEDEM. All developments presented in this paper are based on the formulations in FEDEM, a simulation system developed by the authors which combines finite element, mechanism and control analysis. In order to establish this general simulation system as an efficient multidiscipline robot design tool a robot control system including a high level robot programming language, interpolation algorithms, path generation algorithms, forward and inverse kinematics, control systems, gear and transmission models are implemented. These new features provide a high level of integration between traditionally separate design disciplines from the very beginning of the design and optimization process. Several simulations have shown that high fidelity mathematical models can be derived and used as a basis for dynamic analysis and controller design in FEDEM.

  1. Airline Operations Center Simulation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The NASA Airspace Systems Program (ASP) uses a large suite of models, simulations, and laboratories to develop and assess new ATM concepts and technologies. Most of...

  2. Intelligent Tools and Instructional Simulations

    National Research Council Canada - National Science Library

    Murray, William R; Sams, Michelle; Belleville, Michael

    2001-01-01

    This intelligent tools and instructional simulations project was an investigation into the utility of a knowledge-based performance support system to support learning and on-task performance for using...

  3. Network Simulation of Technical Architecture

    National Research Council Canada - National Science Library

    Cave, William

    1998-01-01

    ..., and development of the Army Battle Command System (ABCS). PSI delivered a hierarchical iconic modeling facility that can be used to structure and restructure both models and scenarios, interactively, while simulations are running...

  4. Nuclear Power Plant Simulation Game.

    Science.gov (United States)

    Weiss, Fran

    1979-01-01

    Presents a nuclear power plant simulation game which is designed to involve a class of 30 junior or senior high school students. Scientific, ecological, and social issues covered in the game are also presented. (HM)

  5. Simulating the Commander's Decision Process

    National Research Council Canada - National Science Library

    Kovalchik, Joseph G; Labin, Jonathan W; Rosenlof, Eric R

    2007-01-01

    ... * Commander Federate simulates the human decision process by employing -- A fuzzy expert system to set warfare priorities either by time or event and provides inter-warfare area conflict resolution...

  6. Evolutionary Games and Computer Simulations

    CERN Document Server

    Huberman, B A; Huberman, Bernardo A.; Glance, Natalie S.

    1993-01-01

    Abstract: The prisoner's dilemma has long been considered the paradigm for studying the emergence of cooperation among selfish individuals. Because of its importance, it has been studied through computer experiments as well as in the laboratory and by analytical means. However, there are important differences between the way a system composed of many interacting elements is simulated by a digital machine and the manner in which it behaves when studied in real experiments. In some instances, these disparities can be marked enough so as to cast doubt on the implications of cellular automata type simulations for the study of cooperation in social systems. In particular, if such a simulation imposes space-time granularity, then its ability to describe the real world may be compromised. Indeed, we show that the results of digital simulations regarding territoriality and cooperation differ greatly when time is discrete as opposed to continuous.

  7. Upgrades for the CMS simulation

    Science.gov (United States)

    Hildreth, M.; Ivanchenko, V. N.; Lange, D. J.; CMS Collaboration

    2017-10-01

    We report the current status of the full simulation application developed by the CMS experiment. For LHC run-II, CMS is using Geant4 10.0p02 built in sequential mode. About 16 billion events were produced for run-II analysis during 2015-2016. A new method to handle pileup events has been developed and is now used for regular processing of simulation events. We plan to use Geant4 10.2p02 for 2017 production. In this work, we present CPU and memory performance of the CMS full simulation for different configurations and Geant4 versions considered during our testing. We also discuss technical aspects of the migration to Geant4 10.2 and a new premixing scheme for the simulation of pileup.

  8. Surgical Simulator Design and Development

    NARCIS (Netherlands)

    Dankelman, J.

    2007-01-01

    With the introduction of minimally invasive surgery (MIS), it became necessary to develop training methods to learn skills outside the operating room. Several training simulators have become commercially available, but fundamental research into the requirements for effective and efficient training

  9. Simulation systems: design and applications

    Directory of Open Access Journals (Sweden)

    Liudmila Burtseva

    1996-09-01

    Full Text Available In this paper the history of Simulation System Group investigations is presented. Some important achievements in past and present time are marked. The directions of future investigations are discussed in the fourth section of the paper.

  10. Distributed Air Traffic Control Simulator

    Directory of Open Access Journals (Sweden)

    R. Radovanović

    2013-06-01

    Full Text Available During initial training air traffic control students acquire theoretical knowledge in various fields including air traffic management, aircraft performance, air traffic control equipment and systems, navigation and others. This paper proposes a simulator and explains its use and features that allows students to gain a practical insight into their coursework in order to complement their training. The goal of the simulator is to realistically implement all the key functionalities needed to cover the topics that were presented in class. The simulator offers a user friendly, distributed, and multi-role environment that can be deployed on regular PCs. Moreover, this paper discusses and resolves some of the main conceptual and implementational issues that were faced during simulator development.

  11. A novel home laparoscopic simulator.

    Science.gov (United States)

    Al-Abed, Yahya; Cooper, David G

    2009-01-01

    As laparoscopic surgery becomes increasingly accepted as the technique of choice for many procedures, changes in training structure and working practice limit opportunities for trainees to acquire these new skills. A solution to this problem is the development of simulators that help to develop and hone skills before exposure to the operating theater. Several excellent yet costly simulators exist that have been demonstrated to improve laparoscopic skills. Furthermore, several reports in the literature describe the development of "home simulators"; however, each of these has limitations. The development of a home laparoscopic simulator is reported here that is cheap and easy to build and incorporates an extra dimension of practical port insertion as well as a novel design for a mobile light and camera source.

  12. Simulation Package based on Placet

    CERN Document Server

    D'Amico, T E; Leros, Nicolas; Schulte, Daniel

    2001-01-01

    The program PLACET is used to simulate transverse and longitudinal beam effects in the main linac, the drive-beam accelerator and the drive-beam decelerators of CLIC, as well as in the linac of CTF3. It provides different models of accelerating and decelerating structures, linear optics and thin multipoles. Several methods of beam-based alignment, including emittance tuning bumps and feedback, and different failure modes can be simulated. An interface to the beam-beam simulation code GUINEA-PIG exists. Currently, interfaces to MAD and TRANSPORT are under development and an extension to transfer lines and bunch compressors is also being made. In the future, the simulations will need to be performed by many users, which requires a simplified user interface. The paper describes the status of PLACET and plans for the futur

  13. Design of simulation-based medical education and advantages and disadvantages of in situ simulation versus off-site simulation

    OpenAIRE

    Sorensen, J.L.; Ostergaard, D.; Leblanc, V.; Ottesen, B; Konge, L; Dieckmann, P; Vleuten, C. van der

    2017-01-01

    BACKGROUND: Simulation-based medical education (SBME) has traditionally been conducted as off-site simulation in simulation centres. Some hospital departments also provide off-site simulation using in-house training room(s) set up for simulation away from the clinical setting, and these activities are called in-house training. In-house training facilities can be part of hospital departments and resemble to some extent simulation centres but often have less technical equipment. In situ simulat...

  14. AESS: Accelerated Exact Stochastic Simulation

    Science.gov (United States)

    Jenkins, David D.; Peterson, Gregory D.

    2011-12-01

    The Stochastic Simulation Algorithm (SSA) developed by Gillespie provides a powerful mechanism for exploring the behavior of chemical systems with small species populations or with important noise contributions. Gene circuit simulations for systems biology commonly employ the SSA method, as do ecological applications. This algorithm tends to be computationally expensive, so researchers seek an efficient implementation of SSA. In this program package, the Accelerated Exact Stochastic Simulation Algorithm (AESS) contains optimized implementations of Gillespie's SSA that improve the performance of individual simulation runs or ensembles of simulations used for sweeping parameters or to provide statistically significant results. Program summaryProgram title: AESS Catalogue identifier: AEJW_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJW_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: University of Tennessee copyright agreement No. of lines in distributed program, including test data, etc.: 10 861 No. of bytes in distributed program, including test data, etc.: 394 631 Distribution format: tar.gz Programming language: C for processors, CUDA for NVIDIA GPUs Computer: Developed and tested on various x86 computers and NVIDIA C1060 Tesla and GTX 480 Fermi GPUs. The system targets x86 workstations, optionally with multicore processors or NVIDIA GPUs as accelerators. Operating system: Tested under Ubuntu Linux OS and CentOS 5.5 Linux OS Classification: 3, 16.12 Nature of problem: Simulation of chemical systems, particularly with low species populations, can be accurately performed using Gillespie's method of stochastic simulation. Numerous variations on the original stochastic simulation algorithm have been developed, including approaches that produce results with statistics that exactly match the chemical master equation (CME) as well as other approaches that approximate the CME. Solution

  15. Biomedical Applications of Simulated Environments .

    OpenAIRE

    W. Selvamurthy

    1993-01-01

    Environmental physiology assumes great significance in our national context of the diverse climatic conditions prevailing in different regions. Troops have to operate in diverse environmental conditions guarding the frontiers. Hence, the research in this area has been focused on the usage of field studies in the natural environments or simulated environments in the laboratory. Besides, the application of the simulation chambers in the research on the physiological effects of diverse en...

  16. Medical Simulations for Exploration Medicine

    Science.gov (United States)

    Reyes, David; Suresh, Rahul; Pavela, James; Urbina, Michelle; Mindock, Jennifer; Antonsen, Erik

    2018-01-01

    Medical simulation is a useful tool that can be used to train personnel, develop medical processes, and assist cross-disciplinary communication. Medical simulations have been used in the past at NASA for these purposes, however they are usually created ad hoc. A stepwise approach to scenario development has not previously been used. The NASA Exploration Medical Capability (ExMC) created a medical scenario development tool to test medical procedures, technologies, concepts of operation and for use in systems engineering (SE) processes.

  17. Aircraft ditching loads simulation tool

    OpenAIRE

    Bonanni, A.; Vandewaeter, L.; Havill, C.; Kanyoo, P.; Taunton, D.J.; Blake, J.I.R.; Cropper, E.; Hancock, S.

    2015-01-01

    The present work presents a novel methodology developed for calculating the steady loads acting on aircraft structures in the event of ditching in water. It represents the preliminary result of Stirling Dynamics as part of a NATEP research project. The overall objective of the project is to expand the capabilities of the Stirling Dynamics proprietary software SD-GLOAD (originally designed for ground and crash loads dynamic simulations) to aircraft ditching simulations. The methodology present...

  18. Patient Simulators Train Emergency Caregivers

    Science.gov (United States)

    2014-01-01

    Johnson Space Center teamed up with Sarasota, Florida-based METI (now CAE Healthcare) through the STTR program to ruggedize the company’s patient simulators for training astronauts in microgravity environments. The design modifications were implemented in future patient simulators that are now used to train first responders in the US military as well as fire departments and other agencies that work in disaster zones.

  19. TREAT Modeling and Simulation Strategy

    Energy Technology Data Exchange (ETDEWEB)

    DeHart, Mark David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    This report summarizes a four-phase process used to describe the strategy in developing modeling and simulation software for the Transient Reactor Test Facility. The four phases of this research and development task are identified as (1) full core transient calculations with feedback, (2) experiment modeling, (3) full core plus experiment simulation and (4) quality assurance. The document describes the four phases, the relationship between these research phases, and anticipated needs within each phase.

  20. Simulation and Non-Simulation Based Human Reliability Analysis Approaches

    Energy Technology Data Exchange (ETDEWEB)

    Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Shirley, Rachel Elizabeth [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey Clark [Idaho National Lab. (INL), Idaho Falls, ID (United States); Mandelli, Diego [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-12-01

    Part of the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Program, the Risk-Informed Safety Margin Characterization (RISMC) Pathway develops approaches to estimating and managing safety margins. RISMC simulations pair deterministic plant physics models with probabilistic risk models. As human interactions are an essential element of plant risk, it is necessary to integrate human actions into the RISMC risk model. In this report, we review simulation-based and non-simulation-based human reliability assessment (HRA) methods. Chapter 2 surveys non-simulation-based HRA methods. Conventional HRA methods target static Probabilistic Risk Assessments for Level 1 events. These methods would require significant modification for use in dynamic simulation of Level 2 and Level 3 events. Chapter 3 is a review of human performance models. A variety of methods and models simulate dynamic human performance; however, most of these human performance models were developed outside the risk domain and have not been used for HRA. The exception is the ADS-IDAC model, which can be thought of as a virtual operator program. This model is resource-intensive but provides a detailed model of every operator action in a given scenario, along with models of numerous factors that can influence operator performance. Finally, Chapter 4 reviews the treatment of timing of operator actions in HRA methods. This chapter is an example of one of the critical gaps between existing HRA methods and the needs of dynamic HRA. This report summarizes the foundational information needed to develop a feasible approach to modeling human interactions in the RISMC simulations.

  1. Dynamic simulation of DH house substations. Simulation models

    Energy Technology Data Exchange (ETDEWEB)

    Thorsen, J.E. [Danfoss A/S, Nordborg (Denmark). Building Control Division

    2003-06-01

    Danfoss AS proceeds on developing simulation models of HVAC components including control equipment for district heating systems. The author presents an example of a simulated domestic hot water service station, describes some of the model components and shows the link between mathematical model and simulation model. Furthermore, an example of hardware in the loop simulation is presented. In this case a domestic heating system is built up in the laboratory by hardware components connected with real time simulations. This system forms the basis for test and evaluation of new control strategies. (orig.) [German] Danfoss AS, Nordborg/Daenemark, entwickelt Simulationsmodelle fuer Komponenten im Bereich Heizung/Lueftung/Klimatechnik einschliesslich der Regelungssysteme fuer Fernwaermeanlagen. Der Autor stellt das Simulationsmodell fuer einen Warmwassererwaermer dar. Darueber hinaus wird das Beispiel einer Simulation unter Einbeziehung von realen Komponenten beschrieben. Dabei wurde im Labor eine Heizanlage aufgebaut und an ein Echtzeit-Simulationsprogramm angeschlossen. Dieses System bildet die Grundlage fuer die Erprobung und Evaluierung neuer Regelungsstrategien. In den letzten 10 Jahren hat Danfoss mit dem Einsatz dynamischer Simulationen bei der Entwicklung von Regelungssystemen fuer Fernwaermeanlagen positive Erfahrungen gesammelt. Es hat sich gezeigt, dass die Simulation erfolgreich eingesetzt werden kann, und zwar nicht nur zur Erprobung besonderer Entwicklungsvorschlaege. Ebenso wichtig war es, Informationen und ein besseres Verstaendnis der Wechselbeziehungen zwischen verschiedenen Parametern zu gewinnen, die das Funktionieren einer Heizungs- oder Heisswasseranlage beeinflussen. Danfoss richtet zur Zeit ein Zentrum fuer die Anwendung von Gebaeudeautomatisierungssystemen ein. Dieses Zentrum wird Moeglichkeiten zur Fortbildung und praktischen Erfahrung auf dem Gebiet der Heizungs- Lueftungs- und Klimatechnik bieten. Die Simulationsprogramme werden einen

  2. Skin simulators for dermatological procedures.

    Science.gov (United States)

    Wang, Xiaojie; Albahrani, Yasser; Pan, Michael; Levitt, Jacob

    2015-11-18

    A variety of skin simulators are available on which to practice procedures; however, choice of a suboptimal substitute compromises realism and productive practice. Skin simulators for basic dermatological procedures are reviewed. The authors' anecdotal experience with various skin simulators for different procedures is shared. The following simulators are suggested:  an unripe banana for elliptical excision, pork belly for undermining, pork belly for simple interrupted and buried suture, capped needle on a human shoulder for intramuscular injection, ripe tomato or hotdog with skin for intradermal injection, eggplant for shave biopsy, pork belly for punch biopsy, plastic tape over a dark surface for cryosurgery, and beef liver for electrosurgery.  Flaps are best practiced with foam sandwiched between foam tape or artificial anatomical models created specifically for this purpose. The utility of one simulator over another was not compared in a controlled study. Efficient, realistic skin simulators are readily available for practice, which should enhance the safety of the practitioner and improve outcomes of novices.

  3. Innovative simulation strategies in education.

    Science.gov (United States)

    Aebersold, Michelle; Tschannen, Dana; Bathish, Melissa

    2012-01-01

    The use of simulation in the undergraduate nursing curriculum is gaining popularity and is becoming a foundation of many nursing programs. The purpose of this paper is to highlight a new simulation teaching strategy, virtual reality (VR) simulation, which capitalizes on the technological skills of the new generation student. This small-scale pilot study focused on improving interpersonal skills in senior level nursing students using VR simulation. In this study, a repeated-measure design was used to evaluate the effectiveness of VR simulation on improving student's performance over a series of two VR scenarios. Using the Emergency Medicine Crisis Resource Management (EMCRM) tool, student performance was evaluated. Overall, the total EMCRM score improved but not significantly. The subscale areas of communication (P = .047, 95% CI: - 1.06, -.007) and professional behavior (P = .003, 95% CI: - 1.12, -.303) did show a significant improvement between the two scenario exposures. Findings from this study show the potential for virtual reality simulations to have an impact on nursing student performance.

  4. Innovative Simulation Strategies in Education

    Directory of Open Access Journals (Sweden)

    Michelle Aebersold

    2012-01-01

    Full Text Available The use of simulation in the undergraduate nursing curriculum is gaining popularity and is becoming a foundation of many nursing programs. The purpose of this paper is to highlight a new simulation teaching strategy, virtual reality (VR simulation, which capitalizes on the technological skills of the new generation student. This small-scale pilot study focused on improving interpersonal skills in senior level nursing students using VR simulation. In this study, a repeated-measure design was used to evaluate the effectiveness of VR simulation on improving student’s performance over a series of two VR scenarios. Using the Emergency Medicine Crisis Resource Management (EMCRM tool, student performance was evaluated. Overall, the total EMCRM score improved but not significantly. The subscale areas of communication (P=.047, 95% CI:−1.06,−.007 and professional behavior (P=.003, 95% CI:−1.12,−.303 did show a significant improvement between the two scenario exposures. Findings from this study show the potential for virtual reality simulations to have an impact on nursing student performance.

  5. Upgrading ATLAS Fast Calorimeter Simulation

    CERN Document Server

    Heath, Matthew Peter; The ATLAS collaboration

    2017-01-01

    Producing the very large samples of simulated events required by many physics and performance studies with the ATLAS detector using the full GEANT4 detector simulation is highly CPU intensive. Fast simulation tools are a useful way of reducing CPU requirements when detailed detector simulations are not needed. During the LHC Run-1, a fast calorimeter simulation (FastCaloSim) was successfully used in ATLAS. FastCaloSim provides a simulation of the particle energy response at the calorimeter read-out cell level, taking into account the detailed particle shower shapes and the correlations between the energy depositions in the various calorimeter layers. It is interfaced to the standard ATLAS digitization and reconstruction software, and it can be tuned to data more easily than Geant4. Now an improved version of FastCaloSim is in development, incorporating the experience with the version used during Run-1. The new FastCaloSim aims to overcome some limitations of the first version by improving the description of s...

  6. Modeling and Simulation at NASA

    Science.gov (United States)

    Steele, Martin J.

    2009-01-01

    This slide presentation is composed of two topics. The first reviews the use of modeling and simulation (M&S) particularly as it relates to the Constellation program and discrete event simulation (DES). DES is defined as a process and system analysis, through time-based and resource constrained probabilistic simulation models, that provide insight into operation system performance. The DES shows that the cycles for a launch from manufacturing and assembly to launch and recovery is about 45 days and that approximately 4 launches per year are practicable. The second topic reviews a NASA Standard for Modeling and Simulation. The Columbia Accident Investigation Board made some recommendations related to models and simulations. Some of the ideas inherent in the new standard are the documentation of M&S activities, an assessment of the credibility, and reporting to decision makers, which should include the analysis of the results, a statement as to the uncertainty in the results,and the credibility of the results. There is also discussion about verification and validation (V&V) of models. There is also discussion about the different types of models and simulation.

  7. Automated Knowledge Discovery From Simulators

    Science.gov (United States)

    Burl, Michael; DeCoste, Dennis; Mazzoni, Dominic; Scharenbroich, Lucas; Enke, Brian; Merline, William

    2007-01-01

    A computational method, SimLearn, has been devised to facilitate efficient knowledge discovery from simulators. Simulators are complex computer programs used in science and engineering to model diverse phenomena such as fluid flow, gravitational interactions, coupled mechanical systems, and nuclear, chemical, and biological processes. SimLearn uses active-learning techniques to efficiently address the "landscape characterization problem." In particular, SimLearn tries to determine which regions in "input space" lead to a given output from the simulator, where "input space" refers to an abstraction of all the variables going into the simulator, e.g., initial conditions, parameters, and interaction equations. Landscape characterization can be viewed as an attempt to invert the forward mapping of the simulator and recover the inputs that produce a particular output. Given that a single simulation run can take days or weeks to complete even on a large computing cluster, SimLearn attempts to reduce costs by reducing the number of simulations needed to effect discoveries. Unlike conventional data-mining methods that are applied to static predefined datasets, SimLearn involves an iterative process in which a most informative dataset is constructed dynamically by using the simulator as an oracle. On each iteration, the algorithm models the knowledge it has gained through previous simulation trials and then chooses which simulation trials to run next. Running these trials through the simulator produces new data in the form of input-output pairs. The overall process is embodied in an algorithm that combines support vector machines (SVMs) with active learning. SVMs use learning from examples (the examples are the input-output pairs generated by running the simulator) and a principle called maximum margin to derive predictors that generalize well to new inputs. In SimLearn, the SVM plays the role of modeling the knowledge that has been gained through previous simulation trials

  8. Understanding molecular simulation: from algorithms to applications

    NARCIS (Netherlands)

    Frenkel, D.; Smit, B.

    2002-01-01

    Second and revised edition Understanding Molecular Simulation: From Algorithms to Applications explains the physics behind the "recipes" of molecular simulation for materials science. Computer simulators are continuously confronted with questions concerning the choice of a particular technique

  9. Simulation of aperiodic bipedal sprinting.

    Science.gov (United States)

    Celik, Huseyin; Piazza, Stephen J

    2013-08-01

    Synthesis of legged locomotion through dynamic simulation is useful for exploration of the mechanical and control variables that contribute to efficient gait. Most previous simulations have made use of periodicity constraints, a sensible choice for investigations of steady-state walking or running. Sprinting from rest, however, is aperiodic by nature and this aperiodicity is central to the goal of the movement, as performance is determined in large part by a rapid acceleration phase early in the race. The purpose of this study was to create a novel simulation of aperiodic sprinting using a modified spring-loaded inverted pendulum (SLIP) biped model. The optimal control problem was to find the set of controls that minimized the time for the model to run 20 m, and this problem was solved using a direct multiple shooting algorithm that converts the original continuous time problem into piecewise discrete subproblems. The resulting nonlinear programming problem was solved iteratively using a sequential quadratic programming method. The starting point for the optimizer was an initial guess simulation that was a slow alternating-gait "jogging" simulation developed using proportional-derivative feedback to control trunk attitude, swing leg angle, and leg retraction and extension. The optimized aperiodic sprint simulation solution yielded a substantial improvement in locomotion time over the initial guess (2.79 s versus 6.64 s). Following optimization, the model produced forward impulses at the start of the sprint that were four times greater than those of the initial guess simulation, producing more rapid acceleration. Several gait features demonstrated in the optimized sprint simulation correspond to behaviors of human sprinters: forward trunk lean at the start; straightening of the trunk during acceleration; and a dive at the finish. Optimization resulted in reduced foot contact times (0.065 s versus 0.210 s), but contact times early in the optimized

  10. Simulated consultations: a sociolinguistic perspective.

    Science.gov (United States)

    Atkins, Sarah; Roberts, Celia; Hawthorne, Kamila; Greenhalgh, Trisha

    2016-01-15

    Assessment of consulting skills using simulated patients is widespread in medical education. Most research into such assessment is sited in a statistical paradigm that focuses on psychometric properties or replicability of such tests. Equally important, but less researched, is the question of how far consultations with simulated patients reflect real clinical encounters--for which sociolinguistics, defined as the study of language in its socio-cultural context, provides a helpful analytic lens. In this debate article, we draw on a detailed empirical study of assessed role-plays, involving sociolinguistic analysis of talk in OSCE interactions. We consider critically the evidence for the simulated consultation (a) as a proxy for the real; (b) as performance; (c) as a context for assessing talk; and (d) as potentially disadvantaging candidates trained overseas. Talk is always a performance in context, especially in professional situations (such as the consultation) and institutional ones (the assessment of professional skills and competence). Candidates who can handle the social and linguistic complexities of the artificial context of assessed role-plays score highly--yet what is being assessed is not real professional communication, but the ability to voice a credible appearance of such communication. Fidelity may not be the primary objective of simulation for medical training, where it enables the practising of skills. However the linguistic problems and differences that arise from interacting in artificial settings are of considerable importance in assessment, where we must be sure that the exam construct adequately embodies the skills expected for real-life practice. The reproducibility of assessed simulations should not be confused with their validity. Sociolinguistic analysis of simulations in various professional contexts has identified evidence for the gap between real interactions and assessed role-plays. The contextual conditions of the simulated

  11. Automatic Algorithm Selection for Complex Simulation Problems

    CERN Document Server

    Ewald, Roland

    2012-01-01

    To select the most suitable simulation algorithm for a given task is often difficult. This is due to intricate interactions between model features, implementation details, and runtime environment, which may strongly affect the overall performance. An automated selection of simulation algorithms supports users in setting up simulation experiments without demanding expert knowledge on simulation. Roland Ewald analyzes and discusses existing approaches to solve the algorithm selection problem in the context of simulation. He introduces a framework for automatic simulation algorithm selection and

  12. FPGA-accelerated simulation of computer systems

    CERN Document Server

    Angepat, Hari; Chung, Eric S; Hoe, James C; Chung, Eric S

    2014-01-01

    To date, the most common form of simulators of computer systems are software-based running on standard computers. One promising approach to improve simulation performance is to apply hardware, specifically reconfigurable hardware in the form of field programmable gate arrays (FPGAs). This manuscript describes various approaches of using FPGAs to accelerate software-implemented simulation of computer systems and selected simulators that incorporate those techniques. More precisely, we describe a simulation architecture taxonomy that incorporates a simulation architecture specifically designed f

  13. Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm; Broberg, Ole

    2015-01-01

    Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full......-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups’ high fidelity of room layout and affordance...... of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models’ high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity...

  14. Parallel Simulation of Chip-Multiprocessor Architectures

    National Research Council Canada - National Science Library

    Chidester, Matthew C; George, Alan D

    2002-01-01

    Chip-multiprocessor (CMP) architectures present a challenge for efficient simulation, combining the requirements of a detailed microprocessor simulator with that of a tightly-coupled parallel system...

  15. Simulating Thermonuclear Runaway in Novae

    Science.gov (United States)

    Dursi, L. J.; Truran, J.; Zingale, M.; Calder, A. C.; Fryxell, B.; Olson, K.; Ricker, P.; Rosner, R.; Timmes, F. X.; Tufo, H. M.; MacNeice, P.

    2000-12-01

    A nova is a thought to result from a partially degenerate thermonuclear runaway on the surface of a white dwarf. Material from the underlying white dwarf must be dredged up into the atmosphere in order to produce an explosion with the observed energies; the carbon and oxygen serve as catalysts for the hydrogen burning, allowing the much more temperature-sensitive CNO burning to occur. In order to understand this dredge-up problem, we are running two different types of simulations. The first are large-scale simulations with the FLASH code (Fryxell et al., 2000), using a one-dimensional set of initial conditions of a nova about to undergo runaway created by Ami Glasner. These initial conditions have been used in previous multidimensional simulations (Glasner et al. 1997; Kercek et al. 1998), but these simulations have given widely different results because of different mixing behaviors in the two codes. Our set of simulations will shed some light on this discrepancy; since our code has adaptive mesh refinement (MacNeice et al., 2000), we can afford to highly refine the region of the star where the mixing occurs, without the cost of highly refining the entire region. Because these large-scale computations are extremely compute-intensive, they are not appropriate for broad exploration of initial conditions. To do this, we use a One-Dimensional Turbulence (ODT) model which has been used in astrophysical models previously (Niemeyer & Kerstein, 1997). This allows us to use ODT simulations of the nova as experiments to guide us to interesting regimes to study further with multidimensional FLASH code simulations. This work was supported in part by the Department of Energy Grant No. B341495 to the Center for Astrophysical Thermonuclear Flashes at the University of Chicago under the ASCI Strategic Alliances Program and by NASA/Goddard Space Flight Center

  16. Computer Simulations of Space Plasmas

    Science.gov (United States)

    Goertz, C. K.

    Even a superficial scanning of the latest issues of the Journal of Geophysical Research reveals that numerical simulation of space plasma processes is an active and growing field. The complexity and sophistication of numerically produced “data” rivals that of the real stuff. Sometimes numerical results need interpretation in terms of a simple “theory,” very much as the results of real experiments and observations do. Numerical simulation has indeed become a third independent tool of space physics, somewhere between observations and analytic theory. There is thus a strong need for textbooks and monographs that report the latest techniques and results in an easily accessible form. This book is an attempt to satisfy this need. The editors want it not only to be “proceedings of selected lectures (given) at the first ISSS (International School of Space Simulations in Kyoto, Japan, November 1-2, 1982) but rather…a form of textbook of computer simulations of space plasmas.” This is, of course, a difficult task when many authors are involved. Unavoidable redundancies and differences in notation may confuse the beginner. Some important questions, like numerical stability, are not discussed in sufficient detail. The recent book by C.K. Birdsall and A.B. Langdon (Plasma Physics via Computer Simulations, McGraw-Hill, New York, 1985) is more complete and detailed and seems more suitable as a textbook for simulations. Nevertheless, this book is useful to the beginner and the specialist because it contains not only descriptions of various numerical techniques but also many applications of simulations to space physics phenomena.

  17. Biomass Gasifier for Computer Simulation; Biomassa foergasare foer Computer Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Hansson, Jens; Leveau, Andreas; Hulteberg, Christian [Nordlight AB, Limhamn (Sweden)

    2011-08-15

    This report is an effort to summarize the existing data on biomass gasifiers as the authors have taken part in various projects aiming at computer simulations of systems that include biomass gasification. Reliable input data is paramount for any computer simulation, but so far there is no easy-accessible biomass gasifier database available for this purpose. This study aims at benchmarking current and past gasifier systems in order to create a comprehensive database for computer simulation purposes. The result of the investigation is presented in a Microsoft Excel sheet, so that the user easily can implement the data in their specific model. In addition to provide simulation data, the technology is described briefly for every studied gasifier system. The primary pieces of information that are sought for are temperatures, pressures, stream compositions and energy consumption. At present the resulting database contains 17 gasifiers, with one or more gasifier within the different gasification technology types normally discussed in this context: 1. Fixed bed 2. Fluidised bed 3. Entrained flow. It also contains gasifiers in the range from 100 kW to 120 MW, with several gasifiers in between these two values. Finally, there are gasifiers representing both direct and indirect heating. This allows for a more qualified and better available choice of starting data sets for simulations. In addition to this, with multiple data sets available for several of the operating modes, sensitivity analysis of various inputs will improve simulations performed. However, there have been fewer answers to the survey than expected/hoped for, which could have improved the database further. However, the use of online sources and other public information has to some extent counterbalanced the low response frequency of the survey. In addition to that, the database is preferred to be a living document, continuously updated with new gasifiers and improved information on existing gasifiers.

  18. Validation of Quench Simulation and Simulation of the TWIN Solenoid

    CERN Document Server

    Pots, Rosalinde Hendrika

    2015-01-01

    For the Future Circular Collider at CERN a multi-purpose detector is proposed. The 6T TWIN Solenoid, a very large magnet system with a stored energy of 53 GJ, is being designed. It is important to protect the magnet against quenches in the system. Therefore several existing quench protection systems are evaluated and simulations have be performed on quenches in the TWIN Solenoid. The simulations on quenches in the TWIN Solenoid have been performed with promising results; the hotspot temperatures do not exceed 120 K and layer to layer voltages stay below 500 V. Adding quench heaters to the system might improve the quench protection system further.

  19. Debriefing in Simulation and Beyond.

    Science.gov (United States)

    Abatzis, Vaia T; Littlewood, Keith E

    2015-01-01

    Debriefing, with its roots in military and aviation, is critically important to effective application of simulation education. With its widespread implementation and strong underpinnings in a variety of educational theories, debriefing is a central pillar of essentially all health care simulation centers. Even anesthesiologists who have completed training and practice outside of teaching centers will encounter debriefing when they participate in Part IV of Maintenance of Certification in Anesthesiology in endorsed simulation centers. Beyond this well-established presence, debriefing offers exciting opportunities for improvement of health care education and quality. First, debriefing practices should not be limited to the simulation setting. It is applicable to reflecting upon the crisis situations that are often faced by anesthesiologists, as well as a powerful tool for feedback on a daily basis. The improvement of feedback in both quality and quantity is considered by many educators to be a fundamental step in improving educational and training programs. The principles of debriefing, and probably more importantly the value of debriefing, are invaluable concepts for the clinical environment and amplify the impact of simulation in patient care. It can be reasonably argued that helping health care practitioners develop the habitual practice of giving and receiving feedback could become one of simulation educators' greatest contributions to patient safety. Another important role of debriefing should be in the area of IPE and practice. The challenges of IPE in simulation have been described; it is important for health care educators to be aware of these IPE experiences. These experiences have created a cadre of facilitators ready to participate in meaningful clinical debriefings across specialties and disciplines. Debriefing has played a central role in medical simulation since early implementation. This role is well founded in both history and in educational theory

  20. Design of simulation-based medical education and advantages and disadvantages of in situ simulation versus off-site simulation.

    Science.gov (United States)

    Sørensen, Jette Led; Østergaard, Doris; LeBlanc, Vicki; Ottesen, Bent; Konge, Lars; Dieckmann, Peter; Van der Vleuten, Cees

    2017-01-21

    Simulation-based medical education (SBME) has traditionally been conducted as off-site simulation in simulation centres. Some hospital departments also provide off-site simulation using in-house training room(s) set up for simulation away from the clinical setting, and these activities are called in-house training. In-house training facilities can be part of hospital departments and resemble to some extent simulation centres but often have less technical equipment. In situ simulation, introduced over the past decade, mainly comprises of team-based activities and occurs in patient care units with healthcare professionals in their own working environment. Thus, this intentional blend of simulation and real working environments means that in situ simulation brings simulation to the real working environment and provides training where people work. In situ simulation can be either announced or unannounced, the latter also known as a drill. This article presents and discusses the design of SBME and the advantage and disadvantage of the different simulation settings, such as training in simulation-centres, in-house simulations in hospital departments, announced or unannounced in situ simulations. Non-randomised studies argue that in situ simulation is more effective for educational purposes than other types of simulation settings. Conversely, the few comparison studies that exist, either randomised or retrospective, show that choice of setting does not seem to influence individual or team learning. However, hospital department-based simulations, such as in-house simulation and in situ simulation, lead to a gain in organisational learning. To our knowledge no studies have compared announced and unannounced in situ simulation. The literature suggests some improved organisational learning from unannounced in situ simulation; however, unannounced in situ simulation was also found to be challenging to plan and conduct, and more stressful among participants. The importance of

  1. Simulation, Mastery Learning and Healthcare.

    Science.gov (United States)

    Dunn, William; Dong, Yue; Zendejas, Benjamin; Ruparel, Raaj; Farley, David

    2017-02-01

    Healthcare organizations, becoming increasingly complex, need to use simulation techniques as a tool to provide consistently safe care. Mastery learning techniques minimize variation in learner outcome, thus improving the consistency and cost-effectiveness of care. Today׳s organizations (and their teams of decision makers) exist within varying states of transformation. These transformational times afford opportunities to use mastery learning concepts at an organizational level and to affect necessary change(s). Evolving technologies, including simulation, have provided mechanisms to enhance system performance, reducing reliance on custom-built "problem-solving" solutions for individual system needs. As such, simulation has emerged as an increasingly necessary organizational tool in improving value-driven, consistent processes of care. Both computer-based and non-computer-based algorithms of healthcare simulations offer distinct advantages in improving system performance over traditional methods of quality improvement. Simulation as a process engineering tool, integrated with mastery learning techniques, provides powerful platforms for improving value-based care. Copyright © 2017 Southern Society for Clinical Investigation. Published by Elsevier Inc. All rights reserved.

  2. Progress in modeling and simulation.

    Science.gov (United States)

    Kindler, E

    1998-01-01

    For the modeling of systems, the computers are more and more used while the other "media" (including the human intellect) carrying the models are abandoned. For the modeling of knowledges, i.e. of more or less general concepts (possibly used to model systems composed of instances of such concepts), the object-oriented programming is nowadays widely used. For the modeling of processes existing and developing in the time, computer simulation is used, the results of which are often presented by means of animation (graphical pictures moving and changing in time). Unfortunately, the object-oriented programming tools are commonly not designed to be of a great use for simulation while the programming tools for simulation do not enable their users to apply the advantages of the object-oriented programming. Nevertheless, there are exclusions enabling to use general concepts represented at a computer, for constructing simulation models and for their easy modification. They are described in the present paper, together with true definitions of modeling, simulation and object-oriented programming (including cases that do not satisfy the definitions but are dangerous to introduce misunderstanding), an outline of their applications and of their further development. In relation to the fact that computing systems are being introduced to be control components into a large spectrum of (technological, social and biological) systems, the attention is oriented to models of systems containing modeling components.

  3. Manufacture of Lunar Regolith Simulants

    Science.gov (United States)

    Rickman, D. L.; Wilson, S. A.; Stoeser, D. B.; Weinstein, M. A.; Edmunson, J. E.

    2013-01-01

    The manufacture of lunar regolith simulants can use many technologies unfamiliar to the aerospace industry. Many of these technologies are extensively used in the mining industry. Rock crushing, grinding, process control as a function of particle size, as well as other essential concepts are explained here. Notes are provided on special considerations necessary, given the unusual nature of the desired final product. For example, wet grinding, which is an industry norm, can alter the behavior of simulant materials. As the geologic materials used for simulants can contain minerals such as quartz and pyrite, guidance is provided regarding concepts, risks, measurement, and handling. Extractive metallurgy can be used to produce high-grade components for subsequent manufacture, reducing the compromises inherent in using just rock. Several of the components needed in simulants such as glasses, agglutinates, and breccias are simply not available or not reasonably matched by existing terrestrial resources. Therefore, techniques to produce these in useful quantities were developed and used. Included in this list is the synthesis of specific minerals. The manufacture of two simulants, NU-LHT-1M and NU-LHT-2M, is covered in detail.

  4. LFSC - Linac Feedback Simulation Code

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, Valentin; /Fermilab

    2008-05-01

    The computer program LFSC (Simulation Code>) is a numerical tool for simulation beam based feedback in high performance linacs. The code LFSC is based on the earlier version developed by a collective of authors at SLAC (L.Hendrickson, R. McEwen, T. Himel, H. Shoaee, S. Shah, P. Emma, P. Schultz) during 1990-2005. That code was successively used in simulation of SLC, TESLA, CLIC and NLC projects. It can simulate as pulse-to-pulse feedback on timescale corresponding to 5-100 Hz, as slower feedbacks, operating in the 0.1-1 Hz range in the Main Linac and Beam Delivery System. The code LFSC is running under Matlab for MS Windows operating system. It contains about 30,000 lines of source code in more than 260 subroutines. The code uses the LIAR ('Linear Accelerator Research code') for particle tracking under ground motion and technical noise perturbations. It uses the Guinea Pig code to simulate the luminosity performance. A set of input files includes the lattice description (XSIF format), and plane text files with numerical parameters, wake fields, ground motion data etc. The Matlab environment provides a flexible system for graphical output.

  5. Rapid ISS Power Availability Simulator

    Science.gov (United States)

    Downing, Nicholas

    2011-01-01

    The ISS (International Space Station) Power Resource Officers (PROs) needed a tool to automate the calculation of thousands of ISS power availability simulations used to generate power constraint matrices. Each matrix contains 864 cells, and each cell represents a single power simulation that must be run. The tools available to the flight controllers were very operator intensive and not conducive to rapidly running the thousands of simulations necessary to generate the power constraint data. SOLAR is a Java-based tool that leverages commercial-off-the-shelf software (Satellite Toolkit) and an existing in-house ISS EPS model (SPEED) to rapidly perform thousands of power availability simulations. SOLAR has a very modular architecture and consists of a series of plug-ins that are loosely coupled. The modular architecture of the software allows for the easy replacement of the ISS power system model simulator, re-use of the Satellite Toolkit integration code, and separation of the user interface from the core logic. Satellite Toolkit (STK) is used to generate ISS eclipse and insulation times, solar beta angle, position of the solar arrays over time, and the amount of shadowing on the solar arrays, which is then provided to SPEED to calculate power generation forecasts. The power planning turn-around time is reduced from three months to two weeks (83-percent decrease) using SOLAR, and the amount of PRO power planning support effort is reduced by an estimated 30 percent.

  6. High Fidelity BWR Fuel Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Su Jong [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    This report describes the Consortium for Advanced Simulation of Light Water Reactors (CASL) work conducted for completion of the Thermal Hydraulics Methods (THM) Level 3 milestone THM.CFD.P13.03: High Fidelity BWR Fuel Simulation. High fidelity computational fluid dynamics (CFD) simulation for Boiling Water Reactor (BWR) was conducted to investigate the applicability and robustness performance of BWR closures. As a preliminary study, a CFD model with simplified Ferrule spacer grid geometry of NUPEC BWR Full-size Fine-mesh Bundle Test (BFBT) benchmark has been implemented. Performance of multiphase segregated solver with baseline boiling closures has been evaluated. Although the mean values of void fraction and exit quality of CFD result for BFBT case 4101-61 agreed with experimental data, the local void distribution was not predicted accurately. The mesh quality was one of the critical factors to obtain converged result. The stability and robustness of the simulation was mainly affected by the mesh quality, combination of BWR closure models. In addition, the CFD modeling of fully-detailed spacer grid geometry with mixing vane is necessary for improving the accuracy of CFD simulation.

  7. Simulators predict power plant operation

    Energy Technology Data Exchange (ETDEWEB)

    Peltier, R.

    2002-07-01

    Mix the complexity of a new construction or major retrofit project with today's 'do more with less', a pinch of 'personnel inexperience,' and a dash of 'unintended consequences', and you have got a recipe for insomnia. Advanced simulation tools, however, can help you wring out your design train your operators before the first wire is terminated and just may be get a good night's rest. The article describes several examples of uses of simulation tools. Esscor recently completed a simulation project for a major US utility exploring the potential for furnace/duct implosion that could result from adding higher volumetric flow induced-draft fans and selective catalytic reduction to a 650-MW coal-fired plant. CAF Electronics Inc. provided a full-scope simulator for Alstom's KA24-1 combined-cycle power plant in Paris, France. Computational fluid dynamics (CFD) tools are being used by the Gas Technology Institute to simulate the performance of the next generation of pulverized coal combustors. 5 figs.

  8. ATLAS Fast Tracker Simulation Challenges

    CERN Document Server

    Adelman, Jahred; The ATLAS collaboration; Borodin, Mikhail; Chakraborty, Dhiman; García Navarro, José Enrique; Golubkov, Dmitry; Kama, Sami; Panitkin, Sergey; Smirnov, Yuri; Stewart, Graeme; Tompkins, Lauren; Vaniachine, Alexandre; Volpi, Guido

    2015-01-01

    To deal with Big Data flood from the ATLAS detector most events have to be rejected in the trigger system. the trigger rejection is complicated by the presence of a large number of minimum-bias events – the pileup. To limit pileup effects in the high luminosity environment of the LHC Run-2, ATLAS relies on full tracking provided by the Fast TracKer (FTK) implemented with custom electronics. The FTK data processing pipeline has to be simulated in preparation for LHC upgrades to support electronics design and develop trigger strategies at high luminosity. The simulation of the FTK - a highly parallelized system - has inherent performance bottlenecks on general-purpose CPUs. To take advantage of the Grid Computing power, the FTK simulation is integrated with Monte Carlo simulations at the Production System level above the ATLAS workload management system PanDA. We report on ATLAS experience with FTK simulations on the Grid and next steps for accommodating the growing requirements for resources during the LHC R...

  9. Reliability of analog quantum simulation

    Energy Technology Data Exchange (ETDEWEB)

    Sarovar, Mohan [Sandia National Laboratories, Digital and Quantum Information Systems, Livermore, CA (United States); Zhang, Jun; Zeng, Lishan [Shanghai Jiao Tong University, Joint Institute of UMich-SJTU, Key Laboratory of System Control and Information Processing (MOE), Shanghai (China)

    2017-12-15

    Analog quantum simulators (AQS) will likely be the first nontrivial application of quantum technology for predictive simulation. However, there remain questions regarding the degree of confidence that can be placed in the results of AQS since they do not naturally incorporate error correction. Specifically, how do we know whether an analog simulation of a quantum model will produce predictions that agree with the ideal model in the presence of inevitable imperfections? At the same time there is a widely held expectation that certain quantum simulation questions will be robust to errors and perturbations in the underlying hardware. Resolving these two points of view is a critical step in making the most of this promising technology. In this work we formalize the notion of AQS reliability by determining sensitivity of AQS outputs to underlying parameters, and formulate conditions for robust simulation. Our approach naturally reveals the importance of model symmetries in dictating the robust properties. To demonstrate the approach, we characterize the robust features of a variety of quantum many-body models. (orig.)

  10. Simulating solar power plant variability :

    Energy Technology Data Exchange (ETDEWEB)

    Lave, Matthew Samuel; Ellis, Abraham; Stein, Joshua.

    2013-06-01

    It is important to be able to accurately simulate the variability of solar PV power plants for grid integration studies. We aim to inform integration studies of the ease of implementation and application-specific accuracy of current PV power plant output simulation methods. This report reviews methods for producing simulated high-resolution (sub-hour or even sub-minute) PV power plant output profiles for variability studies and describes their implementation. Two steps are involved in the simulations: estimation of average irradiance over the footprint of a PV plant and conversion of average irradiance to plant power output. Six models are described for simulating plant-average irradiance based on inputs of ground-measured irradiance, satellite-derived irradiance, or proxy plant measurements. The steps for converting plant-average irradiance to plant power output are detailed to understand the contributions to plant variability. A forthcoming report will quantify the accuracy of each method using application-specific validation metrics.

  11. Stochastic models: theory and simulation.

    Energy Technology Data Exchange (ETDEWEB)

    Field, Richard V., Jr.

    2008-03-01

    Many problems in applied science and engineering involve physical phenomena that behave randomly in time and/or space. Examples are diverse and include turbulent flow over an aircraft wing, Earth climatology, material microstructure, and the financial markets. Mathematical models for these random phenomena are referred to as stochastic processes and/or random fields, and Monte Carlo simulation is the only general-purpose tool for solving problems of this type. The use of Monte Carlo simulation requires methods and algorithms to generate samples of the appropriate stochastic model; these samples then become inputs and/or boundary conditions to established deterministic simulation codes. While numerous algorithms and tools currently exist to generate samples of simple random variables and vectors, no cohesive simulation tool yet exists for generating samples of stochastic processes and/or random fields. There are two objectives of this report. First, we provide some theoretical background on stochastic processes and random fields that can be used to model phenomena that are random in space and/or time. Second, we provide simple algorithms that can be used to generate independent samples of general stochastic models. The theory and simulation of random variables and vectors is also reviewed for completeness.

  12. Infrastructure for distributed enterprise simulation

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, M.M.; Yoshimura, A.S.; Goldsby, M.E. [and others

    1998-01-01

    Traditional discrete-event simulations employ an inherently sequential algorithm and are run on a single computer. However, the demands of many real-world problems exceed the capabilities of sequential simulation systems. Often the capacity of a computer`s primary memory limits the size of the models that can be handled, and in some cases parallel execution on multiple processors could significantly reduce the simulation time. This paper describes the development of an Infrastructure for Distributed Enterprise Simulation (IDES) - a large-scale portable parallel simulation framework developed to support Sandia National Laboratories` mission in stockpile stewardship. IDES is based on the Breathing-Time-Buckets synchronization protocol, and maps a message-based model of distributed computing onto an object-oriented programming model. IDES is portable across heterogeneous computing architectures, including single-processor systems, networks of workstations and multi-processor computers with shared or distributed memory. The system provides a simple and sufficient application programming interface that can be used by scientists to quickly model large-scale, complex enterprise systems. In the background and without involving the user, IDES is capable of making dynamic use of idle processing power available throughout the enterprise network. 16 refs., 14 figs.

  13. Discrete and continuous simulation theory and practice

    CERN Document Server

    Bandyopadhyay, Susmita

    2014-01-01

    When it comes to discovering glitches inherent in complex systems-be it a railway or banking, chemical production, medical, manufacturing, or inventory control system-developing a simulation of a system can identify problems with less time, effort, and disruption than it would take to employ the original. Advantageous to both academic and industrial practitioners, Discrete and Continuous Simulation: Theory and Practice offers a detailed view of simulation that is useful in several fields of study.This text concentrates on the simulation of complex systems, covering the basics in detail and exploring the diverse aspects, including continuous event simulation and optimization with simulation. It explores the connections between discrete and continuous simulation, and applies a specific focus to simulation in the supply chain and manufacturing field. It discusses the Monte Carlo simulation, which is the basic and traditional form of simulation. It addresses future trends and technologies for simulation, with par...

  14. Simulating Collective Effects on GPUs

    CERN Document Server

    AUTHOR|(CDS)2095754; Arbenz, Peter

    Computer simulations are an important tool to study the dynamics of charged particles in particle accelerators, with new hardware solutions such as GPUs providing a vast increase in computing power. In the accelerator physics domain simulations are used to understand instabilities arising due to collective e↵ects in high intensity beams which limit the accelerator performance. In this thesis PyHEADTAIL, a code to study collective effects in synchrotrons, is ported to GPUs using PyCUDA. The goal is to achieve a significant speedup while at the same time producing a simple interface for users and other developers. A speedup of 6 compared to the CPU version is achieved on a typical simulation study of instabilities in the Large Hadron Collider (LHC) at CERN.

  15. Performance of distributed multiscale simulations

    Science.gov (United States)

    Borgdorff, J.; Ben Belgacem, M.; Bona-Casas, C.; Fazendeiro, L.; Groen, D.; Hoenen, O.; Mizeranschi, A.; Suter, J. L.; Coster, D.; Coveney, P. V.; Dubitzky, W.; Hoekstra, A. G.; Strand, P.; Chopard, B.

    2014-01-01

    Multiscale simulations model phenomena across natural scales using monolithic or component-based code, running on local or distributed resources. In this work, we investigate the performance of distributed multiscale computing of component-based models, guided by six multiscale applications with different characteristics and from several disciplines. Three modes of distributed multiscale computing are identified: supplementing local dependencies with large-scale resources, load distribution over multiple resources, and load balancing of small- and large-scale resources. We find that the first mode has the apparent benefit of increasing simulation speed, and the second mode can increase simulation speed if local resources are limited. Depending on resource reservation and model coupling topology, the third mode may result in a reduction of resource consumption. PMID:24982258

  16. Modelica-based TCP simulation

    Science.gov (United States)

    Velieva, T. R.; Eferina, E. G.; Korolkova, A. V.; Kulyabov, D. S.; Sevastianov, L. A.

    2017-01-01

    For the study and verification of our mathematical model of telecommunication systems a discrete simulation model and a continuous analytical model were developed. However, for various reasons, these implementations are not entirely satisfactory. It is necessary to develop a more adequate simulation model, possibly using a different modeling paradigm. In order to modeling of the TCP source it is proposed to use a hybrid (continuous-discrete) approach. For computer implementation of the model the physical modeling language Modelica is used. The hybrid approach allows us to take into account the transitions between different states in the continuous model of the TCP protocol. The considered approach allowed to obtain a simple simulation model of TCP source. This model has great potential for expansion. It is possible to implement different types of TCP.

  17. Computer simulation of superionic fluorides

    CERN Document Server

    Castiglione, M

    2000-01-01

    experimentally gives an indication of the correlations between nearby defects is well-reproduced. The most stringent test of simulation model transferability is presented in the studies of lead tin fluoride, in which significant 'covalent' effects are apparent. Other similarly-structured compounds are also investigated, and the reasons behind the adoption of such an unusual layered structure, and the mobility and site occupation of the anions is quantified. In this thesis the nature of ion mobility in cryolite and lead fluoride based compounds is investigated by computer simulation. The phase transition of cryolite is characterised in terms of rotation of AIF sub 6 octahedra, and the conductive properties are shown to result from diffusion of the sodium ions. The two processes appear to be unrelated. Very good agreement with NMR experimental results is found. The Pb sup 2 sup + ion has a very high polarisability, yet treatment of this property in previous simulations has been problematic. In this thesis a mor...

  18. Simulating chemistry using quantum computers.

    Science.gov (United States)

    Kassal, Ivan; Whitfield, James D; Perdomo-Ortiz, Alejandro; Yung, Man-Hong; Aspuru-Guzik, Alán

    2011-01-01

    The difficulty of simulating quantum systems, well known to quantum chemists, prompted the idea of quantum computation. One can avoid the steep scaling associated with the exact simulation of increasingly large quantum systems on conventional computers, by mapping the quantum system to another, more controllable one. In this review, we discuss to what extent the ideas in quantum computation, now a well-established field, have been applied to chemical problems. We describe algorithms that achieve significant advantages for the electronic-structure problem, the simulation of chemical dynamics, protein folding, and other tasks. Although theory is still ahead of experiment, we outline recent advances that have led to the first chemical calculations on small quantum information processors.

  19. A Multiprocessor Operating System Simulator

    Science.gov (United States)

    Johnston, Gary M.; Campbell, Roy H.

    1988-01-01

    This paper describes a multiprocessor operating system simulator that was developed by the authors in the Fall semester of 1987. The simulator was built in response to the need to provide students with an environment in which to build and test operating system concepts as part of the coursework of a third-year undergraduate operating systems course. Written in C++, the simulator uses the co-routine style task package that is distributed with the AT&T C++ Translator to provide a hierarchy of classes that represents a broad range of operating system software and hardware components. The class hierarchy closely follows that of the 'Choices' family of operating systems for loosely- and tightly-coupled multiprocessors. During an operating system course, these classes are refined and specialized by students in homework assignments to facilitate experimentation with different aspects of operating system design and policy decisions. The current implementation runs on the IBM RT PC under 4.3bsd UNIX.

  20. Smart systems integration and simulation

    CERN Document Server

    Poncino, Massimo; Pravadelli, Graziano

    2016-01-01

    This book-presents new methods and tools for the integration and simulation of smart devices. The design approach described in this book explicitly accounts for integration of Smart Systems components and subsystems as a specific constraint. It includes methodologies and EDA tools to enable multi-disciplinary and multi-scale modeling and design, simulation of multi-domain systems, subsystems and components at all levels of abstraction, system integration and exploration for optimization of functional and non-functional metrics. By covering theoretical and practical aspects of smart device design, this book targets people who are working and studying on hardware/software modelling, component integration and simulation under different positions (system integrators, designers, developers, researchers, teachers, students etc.). In particular, it is a good introduction to people who have interest in managing heterogeneous components in an efficient and effective way on different domains and different abstraction l...

  1. Software Simulation of Hot Tearing

    DEFF Research Database (Denmark)

    Andersen, S.; Hansen, P.N.; Hattel, Jesper Henri

    1999-01-01

    . With this additional information, the criteria can, for the first time, be used to their full potential.The purpose of this paper is to first give an introduction to a stress/strain simulation procedure that can be used in any foundry. Then, some results how to predict the hot cracking tendency in a casting are shown......The brittleness of a solidifying alloy in a temperature range near the solidus temperature has been recognised since the fifties as the mechanism responsible for hot tearing. Due to this brittlenes, the metal will crack under even small amounts of strain in that temperature range. We see these hot...... the solidification rate and the strain rate of the hot tear prone areas. But, until recently it was only possible to simulate the solidification rate, so that the criteria could not be used effectively.Today, with new software developments, it is possible to also simulate the strain rate in the hot tear prone areas...

  2. Simulation of human renal system.

    Science.gov (United States)

    Mahmood, Haydar A; Botros, Nazeih M

    2013-01-01

    The goal of this study is to develop a synthesisable computer-simulated model that mimics the function of a simplified renal system. Hardware description language has been used to simulate the model. In future phase of this study, the model will be realised on an electronic chip such as 'Field Programmable Gate Arrays'. The simulated model introduces a dynamic representation of the human body fluid balance under normal conditions and displays the change of urine flow with the amount of ingested water. The inputs of the model are average values of parameters extracted from the renal system. Some of these parameters and variables are: arterial pressure, daily ingested fluid volume, daily ingested sodium, daily ingested potassium, extracellular fluid volume, intracellular fluid volume, renin concentration, angiotensin II concentration, and aldosterone concentration. Our results show that the output of the model is in agreement with those of the literatures.

  3. Bigraphical Languages and their Simulation

    DEFF Research Database (Denmark)

    Højsgaard, Espen

    We study bigraphs as a foundation for practical formal languages and the problem of simulating such bigraphical languages. The theory of bigraphs is a foundational, graphical model of concurrent systems focusing on mobility and connectivity. It is a meta-model in the sense that it is parametrized...... for practical formal languages. However, while direct models of many process calculi have been constructed, it is unclear how suitable bigraphs are for more practical formal languages. Also, the generality of bigraphs comes at a price of complexity in the theory and simulation of bigraphical models is non......-trivial. A key problem is that of matching: deciding if and how a reaction rule applies to a bigraph. In this dissertation, we study bigraphs and their simulation for two types of practical formal languages: programming languages and languages for cell biology. First, we study programming languages and binding...

  4. Simulating social complexity a handbook

    CERN Document Server

    Meyer, Ruth

    2013-01-01

    Social systems are among the most complex known. This poses particular problems for those who wish to understand them. The complexity often makes analytic approaches infeasible and natural language approaches inadequate for relating intricate cause and effect. However, individual- and agent-based computational approaches hold out the possibility of new and deeper understanding of such systems.  Simulating Social Complexity examines all aspects of using agent- or individual-based simulation. This approach represents systems as individual elements having each their own set of differing states and internal processes. The interactions between elements in the simulation represent interactions in the target systems. What makes these elements "social" is that they are usefully interpretable as interacting elements of an observed society. In this, the focus is on human society, but can be extended to include social animals or artificial agents where such work enhances our understanding of human society.  The phenom...

  5. Numerical simulations of Lake Vostok

    Science.gov (United States)

    Curchitser, E.; Tremblay, B.

    2003-04-01

    Numerical simulations of Lake Vostok We present a systematic approach towards a realistic hydrodynamic model of lake Vostok. The lake is characterized by the unusual combination of size (permitting significant geostrophic motion) and an overlying ice sheet several kilometers thick. A priori estimates of the circulation in the deep lake predict a mostly geostrophic circulation driven by horizontal temperature gradients produced by the pressure-dependent freezing point at the base of the (non-uniform) ice sheet. Further preliminary (remote) research has revealed the steep topography and the elliptical geometry of the lake. A three dimensional, primitive equation, free surface, model is used as a starting point for the Lake configuration. We show how the surface pressure gradient forces are modified to permit a simulation that includes the hydrostatic effects of the overlying ice sheet. A thermodynamic ice model is coupled with the circulation component to simulate the ice accretion/melting at the base of the ice sheet. A stretching of the terrain following vertical coordinate is used to resolve the boundary layer in the ice/water interface. Furthermore, the terrain-following coordinate evolves in time, and is used to track the evolution of the ice sheet due to ice accretion/melting. Both idealized and realistic ice sheet bottom topographies (from remote radar data) are used to drive the simulations. Steady state and time evolving simulations (i.e., constant and evolving ice sheet geometry) will be descirbed, as well as a comparison to an idealized box model (Tremblay, Clarke, and Hohman). The coastline and lake bathymetry used in the simulation are derived from radar data and are accurately represented in our model.

  6. Error coding simulations in C

    Science.gov (United States)

    Noble, Viveca K.

    1994-10-01

    When data is transmitted through a noisy channel, errors are produced within the data rendering it indecipherable. Through the use of error control coding techniques, the bit error rate can be reduced to any desired level without sacrificing the transmission data rate. The Astrionics Laboratory at Marshall Space Flight Center has decided to use a modular, end-to-end telemetry data simulator to simulate the transmission of data from flight to ground and various methods of error control. The simulator includes modules for random data generation, data compression, Consultative Committee for Space Data Systems (CCSDS) transfer frame formation, error correction/detection, error generation and error statistics. The simulator utilizes a concatenated coding scheme which includes CCSDS standard (255,223) Reed-Solomon (RS) code over GF(2(exp 8)) with interleave depth of 5 as the outermost code, (7, 1/2) convolutional code as an inner code and CCSDS recommended (n, n-16) cyclic redundancy check (CRC) code as the innermost code, where n is the number of information bits plus 16 parity bits. The received signal-to-noise for a desired bit error rate is greatly reduced through the use of forward error correction techniques. Even greater coding gain is provided through the use of a concatenated coding scheme. Interleaving/deinterleaving is necessary to randomize burst errors which may appear at the input of the RS decoder. The burst correction capability length is increased in proportion to the interleave depth. The modular nature of the simulator allows for inclusion or exclusion of modules as needed. This paper describes the development and operation of the simulator, the verification of a C-language Reed-Solomon code, and the possibility of using Comdisco SPW(tm) as a tool for determining optimal error control schemes.

  7. ALLAN.simulation club; Club ALLAN.simulation

    Energy Technology Data Exchange (ETDEWEB)

    Boudaud, F.

    1994-05-27

    The ALLAN.Simulation code was developed by the R and D direction of Gaz de France (GdF) company with the support of CISI and Dassault Data Services companies. Its aim is to provide a modeling tool for the design and operation of complex technical systems. It uses a `boxes and ropes` representation (non-oriented multi-variable bloc-schemes) which allows the re-use of all or part of previous models or analyses already developed and recorded. The third meeting of the non-GdF users of the ALLAN.Simulation code took place at Sophia Antipolis (France) on May 27, 1994. Several studies performed with ALLAN.Simulation were presented and dealt with: a thermohydraulic loop, an alternator for automobile, and the hydration of cements. This report is a compilation of the transparencies relative to these three studies. A last part is devoted the presentation of the possible links between different existing simulation codes: ALLAN, BASILE, MAPLE, NEPTUNIX. (J.S.)

  8. Manned maneuvering unit simulations on the Space Operations Simulator

    Science.gov (United States)

    Hartley, C.; Cwynar, D.; Ray, L.

    1984-01-01

    Details of the Manned Maneuvering Unit (MMU) and its use is discussed. MMU simulations in the Space Operations Simulator (SOS) use two major devices. The first is a six-degree-of-freedom moving base carriage that allows the trainee freedom to fly the MMU in a large room and to match rates and dock with full scale targets. The second device is a large screen television display that provides the trainee with accurate views of tumbling targets from any point in a surrounding sphere up to 300 meters (1000 feet) in diameter. Astronauts used the SOS to train for the Solar Max repair mission and are now using it to train for a mission to recover the Palapa-B communications satellite. Subjective comparisons by astronauts of an orbit MMU performance to simulated MMU performance in the SOS indicate that the simulations are very realistic. Data from the Solar Max mission have resulted in two software upgrades that increase SOS fidelity for the next MMU mission: a model of contact dynamics between the MMU and a target spacecraft, and a model of MMU plume impingement forces during docking.

  9. Integrating Existing Simulation Components into a Cohesive Simulation System

    Science.gov (United States)

    McLaughlin, Brian J.; Barrett, Larry K.

    2012-01-01

    A tradition of leveraging the re-use of components to help manage costs has evolved in the development of complex system. This tradition continues on in the Joint Polar Satellite System (JPSS) Program with the cloning of the Suomi National Polar-orbiting Partnership (NPP) satellite for the JPSS-1 mission, including the instrument complement. One benefit of re-use on a mission is the availability of existing simulation assets from the systems that were previously built. An issue arises in the continual shift of technology over a long mission, or multi-mission, lifecycle. As the missions mature, the requirements for the observatory simulations evolve. The challenge in this environment becomes re-using the existing components in that ever-changing landscape. To meet this challenge, the system must: establish an operational architecture that minimizes impacts on the implementation of individual components, consolidate the satisfaction of new high-impact requirements into system-level infrastructure, and build in a long-term view of system adaptation that spans the full lifecycle of the simulation system. The Flight Vehicle Test Suite (FVTS) within the JPSS Program is defining and executing this approach to ensure a robust simulation capability for the JPSS multi-mission environment

  10. Simulated Citizen: How Students Experienced a Semester Length Legislative Simulation

    Science.gov (United States)

    Ganzler, Louis M.

    2010-01-01

    This collective case study contains the results of year-long inquiry into how students experienced a semester length legislative simulation that was rife with political conflict. Specifically the study sought to determine: what teaching strategies were employed, what role conflict played in affecting students' political engagement, and what the…

  11. Integrating software architectures for distributed simulations and simulation analysis communities.

    Energy Technology Data Exchange (ETDEWEB)

    Goldsby, Michael E.; Fellig, Daniel; Linebarger, John Michael; Moore, Patrick Curtis; Sa, Timothy J.; Hawley, Marilyn F.

    2005-10-01

    The one-year Software Architecture LDRD (No.79819) was a cross-site effort between Sandia California and Sandia New Mexico. The purpose of this research was to further develop and demonstrate integrating software architecture frameworks for distributed simulation and distributed collaboration in the homeland security domain. The integrated frameworks were initially developed through the Weapons of Mass Destruction Decision Analysis Center (WMD-DAC), sited at SNL/CA, and the National Infrastructure Simulation & Analysis Center (NISAC), sited at SNL/NM. The primary deliverable was a demonstration of both a federation of distributed simulations and a federation of distributed collaborative simulation analysis communities in the context of the same integrated scenario, which was the release of smallpox in San Diego, California. To our knowledge this was the first time such a combination of federations under a single scenario has ever been demonstrated. A secondary deliverable was the creation of the standalone GroupMeld{trademark} collaboration client, which uses the GroupMeld{trademark} synchronous collaboration framework. In addition, a small pilot experiment that used both integrating frameworks allowed a greater range of crisis management options to be performed and evaluated than would have been possible without the use of the frameworks.

  12. Using Simulation to Improve Systems.

    Science.gov (United States)

    Kearney, James A; Deutsch, Ellen S

    2017-10-01

    Attempts to understand and improve health care delivery often focus on the characteristics of the patient and the characteristics of the health care providers, but larger systems surround and integrate with patients and providers. Components of health care delivery systems can support or interfere with efforts to provide optimal health care. Simulation in situ, involving real teams participating in simulations in real care settings, can be used to identify latent safety threats and improve the work environment while simultaneously supporting participant learning. Thoughtful planning and skilled debriefing are essential. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Design automation, languages, and simulations

    CERN Document Server

    Chen, Wai-Kai

    2003-01-01

    As the complexity of electronic systems continues to increase, the micro-electronic industry depends upon automation and simulations to adapt quickly to market changes and new technologies. Compiled from chapters contributed to CRC's best-selling VLSI Handbook, this volume covers a broad range of topics relevant to design automation, languages, and simulations. These include a collaborative framework that coordinates distributed design activities through the Internet, an overview of the Verilog hardware description language and its use in a design environment, hardware/software co-design, syst

  14. Nonlinear Multigrid for Reservoir Simulation

    DEFF Research Database (Denmark)

    Christensen, Max la Cour; Eskildsen, Klaus Langgren; Engsig-Karup, Allan Peter

    2016-01-01

    A feasibility study is presented on the effectiveness of applying nonlinear multigrid methods for efficient reservoir simulation of subsurface flow in porous media. A conventional strategy modeled after global linearization by means of Newton’s method is compared with an alternative strategy...... efficiency for a black-oil model. Furthermore, the use of the FAS method enables a significant reduction in memory usage compared with conventional techniques, which suggests new possibilities for improved large-scale reservoir simulation and numerical efficiency. Last, nonlinear multilevel preconditioning...

  15. Proton Upset Monte Carlo Simulation

    Science.gov (United States)

    O'Neill, Patrick M.; Kouba, Coy K.; Foster, Charles C.

    2009-01-01

    The Proton Upset Monte Carlo Simulation (PROPSET) program calculates the frequency of on-orbit upsets in computer chips (for given orbits such as Low Earth Orbit, Lunar Orbit, and the like) from proton bombardment based on the results of heavy ion testing alone. The software simulates the bombardment of modern microelectronic components (computer chips) with high-energy (.200 MeV) protons. The nuclear interaction of the proton with the silicon of the chip is modeled and nuclear fragments from this interaction are tracked using Monte Carlo techniques to produce statistically accurate predictions.

  16. Simple Simulations of DNA Condensation

    Energy Technology Data Exchange (ETDEWEB)

    STEVENS,MARK J.

    2000-07-12

    Molecular dynamics simulations of a simple, bead-spring model of semiflexible polyelectrolytes such as DNA are performed. All charges are explicitly treated. Starting from extended, noncondensed conformations, condensed structures form in the simulations with tetravalent or trivalent counterions. No condensates form or are stable for divalent counterions. The mechanism by which condensates form is described. Briefly, condensation occurs because electrostatic interactions dominate entropy, and the favored Coulombic structure is a charge ordered state. Condensation is a generic phenomena and occurs for a variety of polyelectrolyte parameters. Toroids and rods are the condensate structures. Toroids form preferentially when the molecular stiffness is sufficiently strong.

  17. Simulations of Astrophysical fluid instabilities

    Science.gov (United States)

    Calder, A. C.; Fryxell, B.; Rosner, R.; Dursi, L. J.; Olson, K.; Ricker, P. M.; Timmes, F. X.; Zingale, M.; MacNeice, P.; Tufo, H. M.

    2001-10-01

    We present direct numerical simulations of mixing at Rayleigh-Taylor unstable interfaces performed with the FLASH code, developed at the ASCI/Alliances Center for Astrophysical Thermonuclear Flashes at the University of Chicago. We present initial results of single-mode studies in two and three dimensions. Our results indicate that three-dimensional instabilities grow significantly faster than two-dimensional instabilities and that grid resolution can have a significant effect on instability growth rates. We also find that unphysical diffusive mixing occurs at the fluid interface, particularly in poorly resolved simulations. .

  18. Simulations of the Microwave Sky

    Energy Technology Data Exchange (ETDEWEB)

    Sehgal, Neelima; /KIPAC, Menlo Park; Bode, Paul; /Princeton U., Astrophys. Sci. Dept.; Das, Sudeep; /Princeton U., Astrophys. Sci. Dept. /Princeton U.; Hernandez-Monteagudo, Carlos; /Garching, Max Planck Inst.; Huffenberger, Kevin; /Miami U.; Lin, Yen-Ting; /Tokyo U., IPMU; Ostriker, Jeremiah P.; /Princeton U., Astrophys. Sci. Dept.; Trac, Hy; /Harvard-Smithsonian Ctr. Astrophys.

    2009-12-16

    We create realistic, full-sky, half-arcminute resolution simulations of the microwave sky matched to the most recent astrophysical observations. The primary purpose of these simulations is to test the data reduction pipeline for the Atacama Cosmology Telescope (ACT) experiment; however, we have widened the frequency coverage beyond the ACT bands and utilized the easily accessible HEALPix map format to make these simulations applicable to other current and near future microwave background experiments. Some of the novel features of these simulations are that the radio and infrared galaxy populations are correlated with the galaxy cluster and group populations, the primordial microwave background is lensed by the dark matter structure in the simulation via a ray-tracing code, the contribution to the thermal and kinetic Sunyaev-Zel'dovich (SZ) signals from galaxy clusters, groups, and the intergalactic medium has been included, and the gas prescription to model the SZ signals has been refined to match the most recent X-ray observations. The cosmology adopted in these simulations is also consistent with the WMAP 5-year parameter measurements. From these simulations we find a slope for the Y{sub 200} - M{sub 200} relation that is only slightly steeper than self-similar, with an intrinsic scatter in the relation of {approx} 14%. Regarding the contamination of cluster SZ flux by radio galaxies, we find for 148 GHz (90 GHz) only 3% (4%) of halos have their SZ decrements contaminated at a level of 20% or more. We find the contamination levels higher for infrared galaxies. However, at 90 GHz, less than 20% of clusters with M{sub 200} > 2.5 x 10{sup 14}M{sub {circle_dot}} and z < 1.2 have their SZ decrements filled in at a level of 20% or more. At 148 GHz, less than 20% of clusters with M{sub 200} > 2.5 x 10{sup 14}M{sub {circle_dot}} and z < 0.8 have their SZ decrements filled in at a level of 50% or larger. Our models also suggest that a population of very high flux

  19. Computer simulation of martensitic transformations

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Ping [Univ. of California, Berkeley, CA (United States)

    1993-11-01

    The characteristics of martensitic transformations in solids are largely determined by the elastic strain that develops as martensite particles grow and interact. To study the development of microstructure, a finite-element computer simulation model was constructed to mimic the transformation process. The transformation is athermal and simulated at each incremental step by transforming the cell which maximizes the decrease in the free energy. To determine the free energy change, the elastic energy developed during martensite growth is calculated from the theory of linear elasticity for elastically homogeneous media, and updated as the transformation proceeds.

  20. Simulator training for endobronchial ultrasound

    DEFF Research Database (Denmark)

    Konge, Lars; Clementsen, Paul Frost; Ringsted, Charlotte

    2015-01-01

    Endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) is very operator dependent and has a long learning curve. Simulation-based training might shorten the learning curve, and an assessment tool with solid validity evidence could ensure basic competency before unsupervised......-trained novices and apprenticeship-trained novices failing the test, respectively; pultrasound assessment tool could be used to provide reliable and valid assessment of competence in EBUS-TBNA, and act as an aid in certification. Virtual-reality simulator training was shown to be more...

  1. Probabilistic Simulation for Nanocomposite Fracture

    Science.gov (United States)

    Chamis, Christos C.

    2010-01-01

    A unique probabilistic theory is described to predict the uniaxial strengths and fracture properties of nanocomposites. The simulation is based on composite micromechanics with progressive substructuring down to a nanoscale slice of a nanofiber where all the governing equations are formulated. These equations have been programmed in a computer code. That computer code is used to simulate uniaxial strengths and fracture of a nanofiber laminate. The results are presented graphically and discussed with respect to their practical significance. These results show smooth distributions from low probability to high.

  2. Tempting food words activate eating simulations

    NARCIS (Netherlands)

    Papies, E.K.|info:eu-repo/dai/nl/304832766

    2013-01-01

    This study shows that tempting food words activate simulations of eating the food, including simulations of the taste and texture of the food, simulations of eating situations, and simulations of hedonic enjoyment. In a feature listing task, participants generated features that are typically true of

  3. The new ATLAS Fast Calorimeter Simulation

    Science.gov (United States)

    Schaarschmidt, J.; ATLAS Collaboration

    2017-10-01

    Current and future need for large scale simulated samples motivate the development of reliable fast simulation techniques. The new Fast Calorimeter Simulation is an improved parameterized response of single particles in the ATLAS calorimeter that aims to accurately emulate the key features of the detailed calorimeter response as simulated with Geant4, yet approximately ten times faster. Principal component analysis and machine learning techniques are used to improve the performance and decrease the memory need compared to the current version of the ATLAS Fast Calorimeter Simulation. A prototype of this new Fast Calorimeter Simulation is in development and its integration into the ATLAS simulation infrastructure is ongoing.

  4. The new ATLAS Fast Calorimeter Simulation

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00223142; The ATLAS collaboration

    2017-01-01

    Current and future need for large scale simulated samples motivate the development of reliable fast simulation techniques. The new Fast Calorimeter Simulation is an improved parameterized response of single particles in the ATLAS calorimeter that aims to accurately emulate the key features of the detailed calorimeter response as simulated with Geant4, yet approximately ten times faster. Principal component analysis and machine learning techniques are used to improve the performance and decrease the memory need compared to the current version of the ATLAS Fast Calorimeter Simulation. A prototype of this new Fast Calorimeter Simulation is in development and its integration into the ATLAS simulation infrastructure is ongoing.

  5. The power of simulating experiments

    NARCIS (Netherlands)

    Meyer, K.M.; Mooij, W.M.; Vos, M.; Hol, W.H.G.; Putten, van der W.H.

    2009-01-01

    Addressing complex ecological research questions often requires complex empirical experiments. However, due to the logistic constraints of empirical studies there is a trade-off between the complexity of experimental designs and sample size. Here, we explore if the simulation of complex ecological

  6. Simulating Building Fires for Movies

    Science.gov (United States)

    Rodriguez, Ricardo C.; Johnson, Randall P.

    1987-01-01

    Fire scenes for cinematography staged at relatively low cost in method that combines several existing techniques. Nearly realistic scenes, suitable for firefighter training, produced with little specialized equipment. Sequences of scenes set up quickly and easily, without compromising safety because model not burned. Images of fire, steam, and smoke superimposed on image of building to simulate burning of building.

  7. Slope failure simulations with MPM

    NARCIS (Netherlands)

    Vardon, P.J.; Wang, B.; Hicks, M.A.

    2017-01-01

    The simulation of slope failures, including both failure initiation and development, has been modelled using the material point method (MPM). Numerical case studies involving various slope angles, heterogeneity and rainfall infiltration are presented. It is demonstrated that, by utilising a

  8. Slope Failure Simulations with MPM

    NARCIS (Netherlands)

    Vardon, P.J.; Wang, B.; Hicks, M.A.

    2017-01-01

    The simulation of slope failures, including both failure initiation and development, has been modelled using the material point method. By utilising a constitutive model which encompasses, in a simplified manner, both pre- and post-failure behaviour, the majority of types of geotechnical slope

  9. Agent Based Simulation Output Analysis

    Science.gov (United States)

    2011-12-01

    over long periods of time) not to have a steady state, but apparently does. These simulation models are available free from sigmawiki.com 2.1...are used in computer animations and movies (for example, in the movie Jurassic Park) as well as to look for emergent social behavior in groups

  10. Electric-hybrid-vehicle simulation

    Science.gov (United States)

    Pasma, D. C.

    The simulation of electric hybrid vehicles is to be performed using experimental data to model propulsion system components. The performance of an existing ac propulsion system will be used as the baseline for comparative purposes. Hybrid components to be evaluated include electrically and mechanically driven flywheels, and an elastomeric regenerative braking system.

  11. Simulation of Test Case B

    DEFF Research Database (Denmark)

    Skovgaard, M.; Nielsen, Peter V.

    This report shows the results of the simulations given in research item 1.19 (isothermal forced convection) within the work of International Energy Agency (lEA), Annex 20 subtask 1. The title of this work is "Air Flow within Buildings" and the working title for subtask 1 is "Room Air...

  12. Xyce parallel electronic simulator design.

    Energy Technology Data Exchange (ETDEWEB)

    Thornquist, Heidi K.; Rankin, Eric Lamont; Mei, Ting; Schiek, Richard Louis; Keiter, Eric Richard; Russo, Thomas V.

    2010-09-01

    This document is the Xyce Circuit Simulator developer guide. Xyce has been designed from the 'ground up' to be a SPICE-compatible, distributed memory parallel circuit simulator. While it is in many respects a research code, Xyce is intended to be a production simulator. As such, having software quality engineering (SQE) procedures in place to insure a high level of code quality and robustness are essential. Version control, issue tracking customer support, C++ style guildlines and the Xyce release process are all described. The Xyce Parallel Electronic Simulator has been under development at Sandia since 1999. Historically, Xyce has mostly been funded by ASC, the original focus of Xyce development has primarily been related to circuits for nuclear weapons. However, this has not been the only focus and it is expected that the project will diversify. Like many ASC projects, Xyce is a group development effort, which involves a number of researchers, engineers, scientists, mathmaticians and computer scientists. In addition to diversity of background, it is to be expected on long term projects for there to be a certain amount of staff turnover, as people move on to different projects. As a result, it is very important that the project maintain high software quality standards. The point of this document is to formally document a number of the software quality practices followed by the Xyce team in one place. Also, it is hoped that this document will be a good source of information for new developers.

  13. Statistical Literacy: Simulations with Dolphins

    Science.gov (United States)

    Strayer, Jeremy; Matuszewski, Amber

    2016-01-01

    In this article, Strayer and Matuszewski present a six-phase strategy that teachers can use to help students develop a conceptual understanding of inferential hypothesis testing through simulation. As Strayer and Matuszewski discuss the strategy, they describe each phase in general, explain how they implemented the phase while teaching their…

  14. Numerical simulation of muzzle blast

    NARCIS (Netherlands)

    Tyler-Street, M.

    2014-01-01

    Structural design methods for naval ships include environmental, operational and military load cases. One of the operational loads acting on a typical naval vessel is the muzzle blast from a gun. Simulating the muzzle blast load acting on a ship structure with CFD and ALE methods leads to large

  15. Simulated Batch Production of Penicillin

    Science.gov (United States)

    Whitaker, A.; Walker, J. D.

    1973-01-01

    Describes a program in applied biology in which the simulation of the production of penicillin in a batch fermentor is used as a teaching technique to give students experience before handling a genuine industrial fermentation process. Details are given for the calculation of minimum production cost. (JR)

  16. Manpower Analysis Using Discrete Simulation

    Science.gov (United States)

    2015-12-01

    levels, which focuses the analysis on mean performance of the MOEs. The stepwise regression bases initial factor selection on Akaike’s Information...important factors that describe the personnel system response (model outputs) as functions of the policy choices (simulation inputs). Multiple regressions ...development of all our models. E. METAMODEL CONSTRUCTION Using linear regression , we can derive relationships between factor settings and observed

  17. ATLAS simulated black hole event

    CERN Multimedia

    Pequenão, J

    2008-01-01

    The simulated collision event shown is viewed along the beampipe. The event is one in which a microscopic-black-hole was produced in the collision of two protons (not shown). The microscopic-black-hole decayed immediately into many particles. The colors of the tracks show different types of particles emerging from the collision (at the center).

  18. Anilortem: A Siting Simulation Game.

    Science.gov (United States)

    Canipe, Stephen L.

    This siting game is based on the assumption that students will become involved in research required to determine the need for a power plant. Once the need is established, students must determine the location and type of plant to be built. There are brief character sketches which describe the key actors in the simulation. It is suggested that…

  19. Simulations of Closed Timelike Curves

    Science.gov (United States)

    Brun, Todd A.; Wilde, Mark M.

    2017-03-01

    Proposed models of closed timelike curves (CTCs) have been shown to enable powerful information-processing protocols. We examine the simulation of models of CTCs both by other models of CTCs and by physical systems without access to CTCs. We prove that the recently proposed transition probability CTCs (T-CTCs) are physically equivalent to postselection CTCs (P-CTCs), in the sense that one model can simulate the other with reasonable overhead. As a consequence, their information-processing capabilities are equivalent. We also describe a method for quantum computers to simulate Deutschian CTCs (but with a reasonable overhead only in some cases). In cases for which the overhead is reasonable, it might be possible to perform the simulation in a table-top experiment. This approach has the benefit of resolving some ambiguities associated with the equivalent circuit model of Ralph et al. Furthermore, we provide an explicit form for the state of the CTC system such that it is a maximum-entropy state, as prescribed by Deutsch.

  20. Computer Based Modelling and Simulation

    Indian Academy of Sciences (India)

    This is supposed to recall gambling and hence the name Monte Carlo simulation. The procedure was developed by. Stanislaw Ulam and John Van Neumann. They used the simu- lation method to solve partial differential equations for diffu- sion of neutrons! (Box 2). We can illustrate the MC method by a simple example.

  1. ESP Syllabus Change and Simulation.

    Science.gov (United States)

    McGinley, Kevin

    1985-01-01

    Discusses the lack of applications of simulations to the study of English for academic purposes. Advocates a "looser" syllabus design which combines knowledge about learning objectives, organization of material, and methodology yet allows for students' needs and ways of learning. (SED)

  2. CERN Fire Brigade rescue simulation

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    The CERN Fire Brigade is made up of experienced firemen from all of the 20 Member States. In these images they are seen at a 'Discovery Monday' held at the Microcosm exhibition. Here visitors learn how the Fire Brigade deal with various situations, including a simulated cave rescue performed by the Hazardous Environments Response Team.

  3. Solar array manufacturing industry simulation

    Science.gov (United States)

    Chamberlain, R. G.; Firnett, P. J.; Kleine, B.

    1980-01-01

    Solar Array Manufacturing Industry Simulation (SAMIS) program is a standardized model of industry to manufacture silicon solar modules for use in electricity generation. Model is used to develop financial reports that detail requirements, including amounts and prices for materials, labor, facilities, and equipment required by companies.

  4. A Solar Sailcraft Simulation Application

    Science.gov (United States)

    Celeda, Tomáš

    2013-01-01

    An application was created to encourage students' practical knowledge of gravitational fields, the law of conservation of energy and other phenomena, such as gravitational slingshots. The educational software simulates the flight of a solar sail spacecraft between two planets of the Solar System using the laws of gravity and radiation…

  5. Optics simulations: a Python workshop

    Science.gov (United States)

    Ghalila, H.; Ammar, A.; Varadharajan, S.; Majdi, Y.; Zghal, M.; Lahmar, S.; Lakshminarayanan, V.

    2017-08-01

    Numerical simulations allow teachers and students to indirectly perform sophisticated experiments that cannot be realizable otherwise due to cost and other constraints. During the past few decades there has been an explosion in the development of numerical tools concurrently with open source environments such as Python software. This availability of open source software offers an incredible opportunity for advancing teaching methodologies as well as in research. More specifically it is possible to correlate theoretical knowledge with experimental measurements using "virtual" experiments. We have been working on the development of numerical simulation tools using the Python program package and we have concentrated on geometric and physical optics simulations. The advantage of doing hands-on numerical experiments is that it allows the student learner to be an active participant in the pedagogical/learning process rather than playing a passive role as in the traditional lecture format. Even in laboratory classes because of constraints of space, lack of equipment and often-large numbers of students, many students play a passive role since they work in groups of 3 or more students. Furthermore these new tools help students get a handle on numerical methods as well simulations and impart a "feel" for the physics under investigation.

  6. The Spacelab IPS Star Simulator

    Science.gov (United States)

    Wessling, Francis C., III

    The cost of doing business in space is very high. If errors occur while in orbit the costs grow and desired scientific data may be corrupted or even lost. The Spacelab Instrument Pointing System (IPS) Star Simulator is a unique test bed that allows star trackers to interface with simulated stars in a laboratory before going into orbit. This hardware-in-the loop testing of equipment on earth increases the probability of success while in space. The IPS Star Simulator provides three fields of view 2.55 x 2.55 degrees each for input into star trackers. The fields of view are produced on three separate monitors. Each monitor has 4096 x 4096 addressable points and can display 50 stars (pixels) maximum at a given time. The pixel refresh rate is 1000 Hz. The spectral output is approximately 550 nm. The available relative visual magnitude range is 2 to 8 visual magnitudes. The star size is less than 100 arc seconds. The minimum star movement is less than 5 arc seconds and the relative position accuracy is approximately 40 arc seconds. The purpose of this paper is to describe the LPS Star Simulator design and to provide an operational scenario so others may gain from the approach and possible use of the system.

  7. Molecular dynamics simulation of nanoindentation

    NARCIS (Netherlands)

    Michielsen, K; Figge, MT; De Raedt, H; De Hosson, JTM; Landau, DP; Lewis, SP; Schuttler, HB

    2003-01-01

    Molecular dynamics simulations are used to investigate the nucleation and dynamics of dislocations during nanoindentation of a (111) FCC plane. The core structure around the dislocation is visualized by coloring the atoms with deviating coordination number and its Burgers vector is automatically

  8. Molecular dynamics simulation of nanoindentation

    NARCIS (Netherlands)

    Michielsen, K.; Figge, M.T.; Raedt, H. De; Hosson, J.T.M. De

    2004-01-01

    Molecular dynamics simulations are used to investigate the nucleation and dynamics of dislocations during nanoindentation of a (111) FCC plane. The core structure around the dislocation is visualized by coloring the atoms with deviating coordination number and its Burgers vector is automatically

  9. Destruction Chemistry of Mustard Simulants

    Science.gov (United States)

    2008-07-04

    organosulfur compounds under both pyrolytic and oxidative conditions. We focus on the destruction of alkyl sulfides that are surrogates for chemical... organosulfur , oxidation, pyrolysis, chemical kinetic mechanism, thermochemistry, reaction, kinetics, flow reactor, GC/MS, FTIR, mustard agent simulant, CWA...destruction chemistry of organosulfur compounds under both pyrolytic and oxidative conditions. We focus on the destruction of alkyl sulfides that are

  10. Interactive Simulations of Biohybrid Systems

    Directory of Open Access Journals (Sweden)

    Sebastian Albrecht von Mammen

    2017-10-01

    Full Text Available In this article, we present approaches to interactive simulations of biohybrid systems. These simulations are comprised of two major computational components: (1 agent-based developmental models that retrace organismal growth and unfolding of technical scaffoldings and (2 interfaces to explore these models interactively. Simulations of biohybrid systems allow us to fast forward and experience their evolution over time based on our design decisions involving the choice, configuration and initial states of the deployed biological and robotic actors as well as their interplay with the environment. We briefly introduce the concept of swarm grammars, an agent-based extension of L-systems for retracing growth processes and structural artifacts. Next, we review an early augmented reality prototype for designing and projecting biohybrid system simulations into real space. In addition to models that retrace plant behaviors, we specify swarm grammar agents to braid structures in a self-organizing manner. Based on this model, both robotic and plant-driven braiding processes can be experienced and explored in virtual worlds. We present an according user interface for use in virtual reality. As we present interactive models concerning rather diverse description levels, we only ensured their principal capacity for interaction but did not consider efficiency analyzes beyond prototypic operation. We conclude this article with an outlook on future works on melding reality and virtuality to drive the design and deployment of biohybrid systems.

  11. Simulated Sampling of Estuary Plankton

    Science.gov (United States)

    Fortner, Rosanne W.; Jenkins, Deborah Bainer

    2009-01-01

    To find out about the microscopic life in the valuable estuary environment, it is usually necessary to be near the water. This dry lab offers an alternative, using authentic data and a simulation of plankton sampling. From the types of organisms found in the sample, middle school students can infer relationships in the biological and physical…

  12. Statewide mesoscopic simulation for Wyoming.

    Science.gov (United States)

    2013-10-01

    This study developed a mesoscopic simulator which is capable of representing both city-level and statewide roadway : networks. The key feature of such models are the integration of (i) a traffic flow model which is efficient enough to : scale to larg...

  13. Simulation of Floaters in Action

    DEFF Research Database (Denmark)

    Nielsen, Morten Eggert; Ulriksen, Martin Dalgaard; Damkilde, Lars

    This report is the first in a series of three, which altogether documents: 1. theory 2. numerical implementation 3. application for Simulation of Floaters in Action (SOFIA), which is a structural analysis tool for slender offshore structures, such as monopiles, jacket structures and floating space...

  14. The Airport Network Flow Simulator.

    Science.gov (United States)

    1976-05-01

    The impact of investment at an individual airport is felt through-out the National Airport System by reduction of delays at other airports in the the system. A GPSS model was constructed to simulate the propagation of delays through a nine-airport sy...

  15. Microprocessor Simulation: A Training Technique.

    Science.gov (United States)

    Oscarson, David J.

    1982-01-01

    Describes the design and application of a microprocessor simulation using BASIC for formal training of technicians and managers and as a management tool. Illustrates the utility of the modular approach for the instruction and practice of decision-making techniques. (SK)

  16. Realistic simulations of coaxial atomisation

    Science.gov (United States)

    Zaleski, Stephane; Fuster, Daniel; Arrufat Jackson, Tomas; Ling, Yue; Cenni, Matteo; Scardovelli, Ruben; Tryggvason, Gretar

    2015-11-01

    We discuss advances in the methodology for Direct Numerical Simulations of coaxial atomization in typical experimental conditions. Such conditions are extremely demanding for the numerical methods. The key difficulty seems to be the combination of high density ratios, surface tension, and large Reynolds numbers. We explore how using a momentum-conserving Volume-Of-Fluid scheme allows to improve the stability and accuracy of the simulations. We show computational evidence that the use of momentum conserving methods allows to reduce the required number of grid points by an order of magnitude in the simple case of a falling rain drop. We then apply these ideas to coaxial atomization. We show that in moderate-size simulations in air-water conditions close to real experiments, instabilities are still present and then discuss ways to fix them. Among those, removing small VOF debris and improving the time-stepping scheme are two important directions.The accuracy of the simulations is then discussed in comparison with experimental results and in particular the angle of ejection of the structures. The code used for this research is free and distributed at http://parissimulator.sf.net.

  17. Modeling control in manufacturing simulation

    NARCIS (Netherlands)

    Zee, Durk-Jouke van der; Chick, S.; Sánchez, P.J.; Ferrin, D.; Morrice, D.J.

    2003-01-01

    A significant shortcoming of traditional simulation languages is the lack of attention paid to the modeling of control structures, i.e., the humans or systems responsible for manufacturing planning and control, their activities and the mutual tuning of their activities. Mostly they are hard coded

  18. Numerical Propulsion System Simulation Architecture

    Science.gov (United States)

    Naiman, Cynthia G.

    2004-01-01

    The Numerical Propulsion System Simulation (NPSS) is a framework for performing analysis of complex systems. Because the NPSS was developed using the object-oriented paradigm, the resulting architecture is an extensible and flexible framework that is currently being used by a diverse set of participants in government, academia, and the aerospace industry. NPSS is being used by over 15 different institutions to support rockets, hypersonics, power and propulsion, fuel cells, ground based power, and aerospace. Full system-level simulations as well as subsystems may be modeled using NPSS. The NPSS architecture enables the coupling of analyses at various levels of detail, which is called numerical zooming. The middleware used to enable zooming and distributed simulations is the Common Object Request Broker Architecture (CORBA). The NPSS Developer's Kit offers tools for the developer to generate CORBA-based components and wrap codes. The Developer's Kit enables distributed multi-fidelity and multi-discipline simulations, preserves proprietary and legacy codes, and facilitates addition of customized codes. The platforms supported are PC, Linux, HP, Sun, and SGI.

  19. Computer Based Modelling and Simulation

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 3. Computer Based Modelling and Simulation - Modelling Deterministic Systems. N K Srinivasan. General Article Volume 6 Issue 3 March 2001 pp 46-54. Fulltext. Click here to view fulltext PDF. Permanent link:

  20. Understanding molecular simulation from algorithms to applications

    CERN Document Server

    Frenkel, Daan

    2001-01-01

    Understanding Molecular Simulation: From Algorithms to Applications explains the physics behind the ""recipes"" of molecular simulation for materials science. Computer simulators are continuously confronted with questions concerning the choice of a particular technique for a given application. A wide variety of tools exist, so the choice of technique requires a good understanding of the basic principles. More importantly, such understanding may greatly improve the efficiency of a simulation program. The implementation of simulation methods is illustrated in pseudocodes and their practic

  1. Agent based simulations in healthcare.

    Science.gov (United States)

    Bilge, Ugur; Saka, Osman

    2006-01-01

    Agent Based Simulations (ABS) is a relatively recent computer paradigm. As opposed to "top down" conventional computer simulations, the ABS approach is a "bottom-up" modelling technique where a medium to high number of independent agents is modelled. These agents' interactions sometimes cause unexpected "emergent" system behaviour. ABS is particularly suitable in the social context such as healthcare where a large number of human agents interact and co-operate for common goals. Today ABS in the social context is often used together with the recently introduced network analysis techniques and network visualization tools for modelling and simulating social agents within organisations. At Akdeniz University we are starting a number of projects for applying ABS technology in healthcare. In this paper we present two of the ongoing projects in this field. Firstly we have developed a prototype simulator for the long term monitoring of Chronic Obstructive Pulmonary Disease (COPD) as a major public health problem. We present the COPD simulator, its agents, parameters and working principles. Secondly we want to apply ABS and the network analysis techniques to visualise and explore informal social networks amongst staff at the Akdeniz University Hospital to assess and evaluate properties of the organisation in terms of its ability to innovate and share knowledge. In our applications, we primarily aim to use ABS in a web-based platform to create a virtual environment for discussion, visualising and running what-if scenarios to test out various options for managing healthcare, as well as sharing information and creating a virtual community.

  2. TASK 2: QUENCH ZONE SIMULATION

    Energy Technology Data Exchange (ETDEWEB)

    Fusselman, Steve

    2015-09-30

    Aerojet Rocketdyne (AR) has developed an innovative gasifier concept incorporating advanced technologies in ultra-dense phase dry feed system, rapid mix injector, and advanced component cooling to significantly improve gasifier performance, life, and cost compared to commercially available state-of-the-art systems. A key feature of the AR gasifier design is the transition from the gasifier outlet into the quench zone, where the raw syngas is cooled to ~ 400°C by injection and vaporization of atomized water. Earlier pilot plant testing revealed a propensity for the original gasifier outlet design to accumulate slag in the outlet, leading to erratic syngas flow from the outlet. Subsequent design modifications successfully resolved this issue in the pilot plant gasifier. In order to gain greater insight into the physical phenomena occurring within this zone, AR developed a cold flow simulation apparatus with Coanda Research & Development with a high degree of similitude to hot fire conditions with the pilot scale gasifier design, and capable of accommodating a scaled-down quench zone for a demonstration-scale gasifier. The objective of this task was to validate similitude of the cold flow simulation model by comparison of pilot-scale outlet design performance, and to assess demonstration scale gasifier design feasibility from testing of a scaled-down outlet design. Test results did exhibit a strong correspondence with the two pilot scale outlet designs, indicating credible similitude for the cold flow simulation device. Testing of the scaled-down outlet revealed important considerations in the design and operation of the demonstration scale gasifier, in particular pertaining to the relative momentum between the downcoming raw syngas and the sprayed quench water and associated impacts on flow patterns within the quench zone. This report describes key findings from the test program, including assessment of pilot plant configuration simulations relative to actual

  3. Sanitary Landfill Simulation - Test Parameters and a Simulator Conceptual Design

    Science.gov (United States)

    1976-08-01

    ACSM -1~ for Nils ........... By L:R-yo/VAILaiL;1I CODES Library card Civil Engineering Laboratory SANITARY LANDFILL SIMULATION - TEST PARAMETERS AND...these landfills comply only marginally with Navy mandatory guidelines [2]. In a FY-74 report on this project [3], CEL presented the results of a...landfills are presently designed for burying solid waste in compliance with Environmental Protection Agency (EPA) operational guidelines . These

  4. Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

    Science.gov (United States)

    Andersen, Simone Nyholm; Broberg, Ole

    2015-11-01

    Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  5. Simulation in bronchoscopy: current and future perspectives.

    Science.gov (United States)

    Nilsson, Philip Mørkeberg; Naur, Therese Maria Henriette; Clementsen, Paul Frost; Konge, Lars

    2017-01-01

    To provide an overview of current literature that informs how to approach simulation practice of bronchoscopy and discuss how findings from other simulation research can help inform the use of simulation in bronchoscopy training. We conducted a literature search on simulation training of bronchoscopy and divided relevant studies in three categories: 1) structuring simulation training in bronchoscopy, 2) assessment of competence in bronchoscopy training, and 3) development of cheap alternatives for bronchoscopy simulation. Bronchoscopy simulation is effective, and the training should be structured as distributed practice with mastery learning criteria (ie, training until a certain level of competence is achieved). Dyad practice (training in pairs) is possible and may increase utility of available simulators. Trainee performance should be assessed with assessment tools with established validity. Three-dimensional printing is a promising new technology opening possibilities for developing cheap simulators with innovative features.

  6. Simulation and resident education in spinal neurosurgery

    Science.gov (United States)

    Bohm, Parker E.; Arnold, Paul M.

    2015-01-01

    Background: A host of factors have contributed to the increasing use of simulation in neurosurgical resident education. Although the number of simulation-related publications has increased exponentially over the past two decades, no studies have specifically examined the role of simulation in resident education in spinal neurosurgery. Methods: We performed a structured search of several databases to identify articles detailing the use of simulation in spinal neurosurgery education in an attempt to catalogue potential applications for its use. Results: A brief history of simulation in medicine is given, followed by current trends of spinal simulation utilization in residency programs. General themes from the literature are identified that are integral for implementing simulation into neurosurgical residency curriculum. Finally, various applications are reported. Conclusion: The use of simulation in spinal neurosurgery education is not as ubiquitous in comparison to other neurosurgical subspecialties, but many promising methods of simulation are available for augmenting resident education. PMID:25745588

  7. Simulation and resident education in spinal neurosurgery.

    Science.gov (United States)

    Bohm, Parker E; Arnold, Paul M

    2015-01-01

    A host of factors have contributed to the increasing use of simulation in neurosurgical resident education. Although the number of simulation-related publications has increased exponentially over the past two decades, no studies have specifically examined the role of simulation in resident education in spinal neurosurgery. We performed a structured search of several databases to identify articles detailing the use of simulation in spinal neurosurgery education in an attempt to catalogue potential applications for its use. A brief history of simulation in medicine is given, followed by current trends of spinal simulation utilization in residency programs. General themes from the literature are identified that are integral for implementing simulation into neurosurgical residency curriculum. Finally, various applications are reported. The use of simulation in spinal neurosurgery education is not as ubiquitous in comparison to other neurosurgical subspecialties, but many promising methods of simulation are available for augmenting resident education.

  8. Four Models of In Situ Simulation

    DEFF Research Database (Denmark)

    Musaeus, Peter; Krogh, Kristian; Paltved, Charlotte

    2014-01-01

    that there are four fruitful approaches to in situ simulation: (1) In situ simulation informed by reported critical incidents and adverse events from emergency departments (ED) in which team training is about to be conducted to write scenarios. (2) In situ simulation through ethnographic studies at the ED. (3) Using...... and relevance Empirical and theoretical research is needed to develop in situ simulation and to theorize and experiment with how we best take reported critical incidents and adverse events back to the clinic. In situ simulation offers a unique way to study team interactions there are widely different approaches......Introduction In situ simulation is characterized by being situated in the clinical environment as opposed to the simulation laboratory. But in situ simulation bears a family resemblance to other types of on the job training. We explore a typology of in situ simulation and suggest...

  9. A systematic review of simulators in otolaryngology.

    Science.gov (United States)

    Javia, Luv; Deutsch, Ellen S

    2012-12-01

    To conduct a systematic review of published articles that describe simulators that could be used in otolaryngology for education, skill acquisition, and/or skill improvement. Data Sources Ovid and Embase databases searched July 14, 2011. Three hundred fifty-three abstracts were independently reviewed by both authors, then 154 eligible articles were reviewed by both authors, and 95 articles were categorized by organ system (eg, otologic); type of simulator (eg, physical, virtual); whether the simulator was a prototype, could be purchased, or was constructed; validation; and level of learning assessment. Discrepancies were resolved by re-review and discussion. In addition to 11 overview articles, 28 articles described 16 otology simulators, most of which are virtual and prototypes. Ninteen articles described 10 sinus/rhinology simulators; most are virtual surgery simulators and prototypes. Eight articles described 8 oral cavity simulators, and 8 articles described neck simulators. Seventeen articles described 13 bronchoscopy simulators; several are full-body high-technology manikins adapted from other purposes. Five articles described eclectic simulators, including some for learning nontechnical and teamwork skills. Half of the simulators have been validated. Learning levels were often not assessed or assessment was limited to the learners' perceptions. A wide variety of simulators are available or under development. Lack of unified validation concepts and limited descriptions restricted our ability to assess model characteristics, availability, and validation. Simulators are emerging as powerful tools to facilitate learning; this review may provide a platform for discussion and refinement of the information reported and analyzed in evaluating simulators.

  10. Does Simulation Improve Recognition and Management of Pediatric Septic Shock, and If One Simulation Is Good, Is More Simulation Better?

    Science.gov (United States)

    Dugan, Mark C; McCracken, Courtney E; Hebbar, Kiran B

    2016-07-01

    Determine whether serial simulation training sessions improve resident recognition and initial septic shock management in a critically ill simulated septic shock patient, and to determine whether serial simulations further improve resident task performance when compared with a single simulation session. Prospective observational cohort study with a live expert review of trainee simulation performance. Expert reviewers blinded to prior trainee performance. A PICU room in a quaternary-care children's hospital, featuring a hi-fidelity pediatric patient simulator. Postgraduate year-2 and postgraduate year-3 pediatric residents who rotate through the PICU. Postgraduate year-3 residents as the control cohort, completing one simulation near the start of their third residency year. Postgraduate year-2 residents as the intervention cohort, completing two simulations during their second residency year and one near the start of their third residency year. Resident objective performance was measured using a validated 27-item checklist (graded 0/1) related to monitoring, data gathering, and interventions in the diagnosis and management of pediatric septic shock. The intervention cohort had a higher mean performance percentage score during their third simulation than the control cohort completing their single simulation (87% vs 77%; p shock was correctly diagnosed more often in the intervention cohort at the time of their third simulation (100% vs 78%; p shock with repetitive simulation showing significant ongoing improvements. Further studies are needed to determine long-term impact on knowledge and skill retention and whether results attained in a simulation environment are translatable into clinical practice in improving bedside care.

  11. HGCal Simulation Analyses for CMS

    CERN Document Server

    Bruno, Sarah Marie

    2015-01-01

    This summer, I approached the topic of fast-timing detection of photons from Higgs decays via simulation analyses, working under the supervision of Dr. Adolf Bornheim of the California Institute of Technology. My specific project focused on simulating the high granularity calorimeter for the Compact Muon Solenoid (CMS) experiment. CMS detects particles using calorimeters. The Electromagnetic Calorimeter (ECal) is arranged cylindrically to form a barrel section and two “endcaps.” Previously, both the barrel and endcap have employed lead tungstate crystal detectors, known as the “shashlik” design. The crystal detectors, however, rapidly degrade from exposure to radiation. This effect is most pronounced in the endcaps. To avoid the high expense of frequently replacing degraded detectors, it was recently decided to eliminate the endcap crystals in favor of an arrangement of silicon detectors known as the “High Granularity Calorimeter” (HGCal), while leaving the barrel detector technology unchanged. T...

  12. Feasibility of Simulated Annealing Tomography

    CERN Document Server

    Vo, Nghia T; Moser, Herbert O

    2014-01-01

    Simulated annealing tomography (SAT) is a simple iterative image reconstruction technique which can yield a superior reconstruction compared with filtered back-projection (FBP). However, the very high computational cost of iteratively calculating discrete Radon transform (DRT) has limited the feasibility of this technique. In this paper, we propose an approach based on the pre-calculated intersection lengths array (PILA) which helps to remove the step of computing DRT in the simulated annealing procedure and speed up SAT by over 300 times. The enhancement of convergence speed of the reconstruction process using the best of multiple-estimate (BoME) strategy is introduced. The performance of SAT under different conditions and in comparison with other methods is demonstrated by numerical experiments.

  13. Piloted simulator assessments of agility

    Science.gov (United States)

    Schneider, Edward T.

    1990-01-01

    NASA has utilized piloted simulators for nearly two decades to study high-angle-of-attack flying qualities, agility, and air-to-air combat. These studies have included assessments of an F-16XL aircraft equipped with thrust vectoring, an assessment of the F-18 HARV maneuvering requirements to assist in thrust vectoring control system design, and an agility assessment of the F-18. The F-18 agility assessment was compared with in-flight testing. Open-loop maneuvers such as 180-deg rolls to measure roll rate showed favorable simulator/in-flight comparison. Closed-loop maneuvers such as rolls to 90 deg with precision stops or certain maximum longitudinal pitching maneuvers showed poorer performance due to reduced aggressiveness of pilot inputs in flight to remain within flight envelope limits.

  14. MODELLING, SIMULATING AND OPTIMIZING BOILERS

    DEFF Research Database (Denmark)

    Sørensen, Kim; Condra, Thomas Joseph; Houbak, Niels

    2004-01-01

    In the present work a framework for optimizing the design of boilers for dynamic operation has been developed. A cost function to be minimized during the optimization has been formulated and for the present design variables related to the Boiler Volume and the Boiler load Gradient (i.e. ring rate...... on the boiler) have been dened. Furthermore a number of constraints related to: minimum and maximum boiler load gradient, minimum boiler size, Shrinking and Swelling and Steam Space Load have been dened. For dening the constraints related to the required boiler volume a dynamic model for simulating the boiler...... performance has been developed. Outputs from the simulations are shrinking and swelling of water level in the drum during for example a start-up of the boiler, these gures combined with the requirements with respect to allowable water level uctuations in the drum denes the requirements with respect to drum...

  15. Standard for Models and Simulations

    Science.gov (United States)

    Steele, Martin J.

    2016-01-01

    This NASA Technical Standard establishes uniform practices in modeling and simulation to ensure essential requirements are applied to the design, development, and use of models and simulations (MS), while ensuring acceptance criteria are defined by the program project and approved by the responsible Technical Authority. It also provides an approved set of requirements, recommendations, and criteria with which MS may be developed, accepted, and used in support of NASA activities. As the MS disciplines employed and application areas involved are broad, the common aspects of MS across all NASA activities are addressed. The discipline-specific details of a given MS should be obtained from relevant recommended practices. The primary purpose is to reduce the risks associated with MS-influenced decisions by ensuring the complete communication of the credibility of MS results.

  16. Variance decomposition in stochastic simulators

    KAUST Repository

    Le Maître, O. P.

    2015-06-28

    This work aims at the development of a mathematical and computational approach that enables quantification of the inherent sources of stochasticity and of the corresponding sensitivities in stochastic simulations of chemical reaction networks. The approach is based on reformulating the system dynamics as being generated by independent standardized Poisson processes. This reformulation affords a straightforward identification of individual realizations for the stochastic dynamics of each reaction channel, and consequently a quantitative characterization of the inherent sources of stochasticity in the system. By relying on the Sobol-Hoeffding decomposition, the reformulation enables us to perform an orthogonal decomposition of the solution variance. Thus, by judiciously exploiting the inherent stochasticity of the system, one is able to quantify the variance-based sensitivities associated with individual reaction channels, as well as the importance of channel interactions. Implementation of the algorithms is illustrated in light of simulations of simplified systems, including the birth-death, Schlögl, and Michaelis-Menten models.

  17. Modeling and Simulation of Nanoindentation

    Science.gov (United States)

    Huang, Sixie; Zhou, Caizhi

    2017-11-01

    Nanoindentation is a hardness test method applied to small volumes of material which can provide some unique effects and spark many related research activities. To fully understand the phenomena observed during nanoindentation tests, modeling and simulation methods have been developed to predict the mechanical response of materials during nanoindentation. However, challenges remain with those computational approaches, because of their length scale, predictive capability, and accuracy. This article reviews recent progress and challenges for modeling and simulation of nanoindentation, including an overview of molecular dynamics, the quasicontinuum method, discrete dislocation dynamics, and the crystal plasticity finite element method, and discusses how to integrate multiscale modeling approaches seamlessly with experimental studies to understand the length-scale effects and microstructure evolution during nanoindentation tests, creating a unique opportunity to establish new calibration procedures for the nanoindentation technique.

  18. CESE: Cell Electrophysiology Simulation Environment.

    Science.gov (United States)

    Missan, Sergey; McDonald, Terence F

    2005-01-01

    Cell electrophysiology simulation environment (CESE) is an integrated environment for performing simulations with a variety of electrophysiological models that have Hodgkin-Huxley and Markovian formulations of ionic currents. CESE is written in Java 2 and is readily portable to a number of operating systems. CESE allows execution of single-cell models and modification and clamping of model parameters, as well as data visualisation and analysis using a consistent interface. Model creation for CESE is facilitated by an object-oriented approach and use of an extensive modelling framework. The Web-based model repository is available. CESE and the Web-based model repository are available at http://cese.sourceforge.net/.

  19. Monte Carlo simulation code modernization

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    The continual development of sophisticated transport simulation algorithms allows increasingly accurate description of the effect of the passage of particles through matter. This modelling capability finds applications in a large spectrum of fields from medicine to astrophysics, and of course HEP. These new capabilities however come at the cost of a greater computational intensity of the new models, which has the effect of increasing the demands of computing resources. This is particularly true for HEP, where the demand for more simulation are driven by the need of both more accuracy and more precision, i.e. better models and more events. Usually HEP has relied on the "Moore's law" evolution, but since almost ten years the increase in clock speed has withered and computing capacity comes in the form of hardware architectures of many-core or accelerated processors. To harness these opportunities we need to adapt our code to concurrent programming models taking advantages of both SIMD and SIMT architectures. Th...

  20. Environmental Effect on Egress Simulation

    KAUST Repository

    Rodriguez, Samuel

    2012-01-01

    Evacuation and egress simulations can be a useful tool for studying the effect of design decisions on the flow of agent movement. This type of simulation can be used to determine before hand the effect of design decisions and enable exploration of potential improvements. In this work, we study at how agent egress is affected by the environment in real world and large scale virtual environments and investigate metrics to analyze the flow. Our work differs from many evacuation systems in that we support grouping restrictions between agents (e.g., families or other social groups traveling together), and model scenarios with multiple modes of transportation with physically realistic dynamics (e.g., individuals walk from a building to their own cars and leave only when all people in the group arrive).

  1. Multilevel techniques for Reservoir Simulation

    DEFF Research Database (Denmark)

    Christensen, Max la Cour

    The subject of this thesis is the development, application and study of novel multilevel methods for the acceleration and improvement of reservoir simulation techniques. The motivation for addressing this topic is a need for more accurate predictions of porous media flow and the ability to carry...... based on element-based Algebraic Multigrid (AMGe). In particular, an advanced AMGe technique with guaranteed approximation properties is used to construct a coarse multilevel hierarchy of Raviart-Thomas and L2 spaces for the Galerkin coarsening of a mixed formulation of the reservoir simulation...... equations. By experimentation it is found that the AMGe based upscaling technique provided very accurate results while reducing the computational time proportionally to the reduction in degrees of freedom. Furthermore, it is demonstrated that the AMGe coarse spaces (interpolation operators) can be used...

  2. Quantifying and simulating human sensation

    DEFF Research Database (Denmark)

    Quantifying and simulating human sensation – relating science and technology of indoor climate research Abstract In his doctoral thesis from 1970 civil engineer Povl Ole Fanger proposed that the understanding of indoor climate should focus on the comfort of the individual rather than averaged con...... this understanding of human sensation was adjusted to technology. I will look into the construction of the equipment, what it measures and the relationship between theory, equipment and tradition....... for indoor climate have been based on Fanger’s index. Alongside Fanger worked the inventor and mechanical engineer Thomas Lund Madsen, who developed equipment for measuring the climate parameters and thermal comfort. Amongst these are sensors which simulate the human body thermally. Prototypes and other...

  3. Simulation of Cavitation Water Flows

    Directory of Open Access Journals (Sweden)

    Piroz Zamankhan

    2015-01-01

    Full Text Available The air-water mixture from an artificially aerated spillway flowing down to a canyon may cause serious erosion and damage to both the spillway surface and the environment. The location of an aerator, its geometry, and the aeration flow rate are important factors in the design of an environmentally friendly high-energy spillway. In this work, an analysis of the problem based on physical and computational fluid dynamics (CFD modeling is presented. The numerical modeling used was a large eddy simulation technique (LES combined with a discrete element method. Three-dimensional simulations of a spillway were performed on a graphics processing unit (GPU. The result of this analysis in the form of design suggestions may help diminishing the hazards associated with cavitation.

  4. Model for Simulation Atmospheric Turbulence

    DEFF Research Database (Denmark)

    Lundtang Petersen, Erik

    1976-01-01

    A method that produces realistic simulations of atmospheric turbulence is developed and analyzed. The procedure makes use of a generalized spectral analysis, often called a proper orthogonal decomposition or the Karhunen-Loève expansion. A set of criteria, emphasizing a realistic appearance......, a correct spectral shape, and non-Gaussian statistics, is selected in order to evaluate the model turbulence. An actual turbulence record is analyzed in detail providing both a standard for comparison and input statistics for the generalized spectral analysis, which in turn produces a set of orthonormal....... The method is unique in modeling the three velocity components simultaneously, and it is found that important cross-statistical features are reasonably well-behaved. It is concluded that the model provides a practical, operational simulator of atmospheric turbulence....

  5. Modernizing the ATLAS Simulation Infrastructure

    CERN Document Server

    Di Simone, Andrea; The ATLAS collaboration

    2016-01-01

    The ATLAS Simulation infrastructure has been used to produce upwards of 50 billion proton-proton collision events for analyses ranging from detailed Standard Model measurements to searches for exotic new phenomena. In the last several years, the infrastructure has been heavily revised to allow intuitive multithreading and significantly improved maintainability. Such a massive update of a legacy code base requires careful choices about what pieces of code to completely rewrite and what to wrap or revise. The initialization of the complex geometry was generalized to allow new tools and geometry description languages, popular in some detector groups. The addition of multithreading requires Geant4 MT and GaudiHive, two frameworks with fundamentally different approaches to multithreading, to work together. It also required enforcing thread safety throughout a large code base, which required the redesign of several aspects of the simulation, including “truth,” the record of particle interactions with the detect...

  6. Modernizing the ATLAS simulation infrastructure

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00213431; The ATLAS collaboration

    2017-01-01

    The ATLAS Simulation infrastructure has been used to produce upwards of 50 billion proton-proton collision events for analyses ranging from detailed Standard Model measurements to searches for exotic new phenomena. In the last several years, the infrastructure has been heavily revised to allow intuitive multithreading and significantly improved maintainability. Such a massive update of a legacy code base requires careful choices about what pieces of code to completely rewrite and what to wrap or revise. The initialization of the complex geometry was generalized to allow new tools and geometry description languages, popular in some detector groups. The addition of multithreading requires Geant4-MT and GaudiHive, two frameworks with fundamentally different approaches to multithreading, to work together. It also required enforcing thread safety throughout a large code base, which required the redesign of several aspects of the simulation, including truth, the record of particle interactions with the detector dur...

  7. General introduction to simulation models

    DEFF Research Database (Denmark)

    Hisham Beshara Halasa, Tariq; Boklund, Anette

    2012-01-01

    trials. However, if simulation models would be used, good quality input data must be available. To model FMD, several disease spread models are available. For this project, we chose three simulation model; Davis Animal Disease Spread (DADS), that has been upgraded to DTU-DADS, InterSpread Plus (ISP......) and the North American Animal Disease Spread Model (NAADSM). The models are rather data intensive, but in varying degrees. They generally demand data on the farm level, including farm location, type, number of animals, and movement and contact frequency to other farms. To be able to generate a useful model...... of FMD spread that can provide useful and trustworthy advises, there are four important issues, which the model should represent: 1) The herd structure of the country in question, 2) the dynamics of animal movements and contacts between herds, 3) the biology of the disease, and 4) the regulations...

  8. Drosophila Photo-transduction Simulator

    Directory of Open Access Journals (Sweden)

    Konstantin Nikolic

    2013-04-01

    Full Text Available This software contains detailed modelling of the single photon response, the  quantum bump, of fly photoreceptors. All known components participating in the primary phototransduction process are taken into account, and estimates are given for both the physical and chemical parameters. Both deterministic and stochastic simulations of the photoinduced current are possible using the same software. The code was implemented in Matlab and stored at the Imperial College London repository. It includes a GUI which offers an easy access and manipulation of the input parameters and therefore allows for simulations for a vast number of interesting possibilities, such as various mutants, different ionic concentrations, etc. Explanations for all the equations and parameters used are given in ref. 1.

  9. Human motion simulation predictive dynamics

    CERN Document Server

    Abdel-Malek, Karim

    2013-01-01

    Simulate realistic human motion in a virtual world with an optimization-based approach to motion prediction. With this approach, motion is governed by human performance measures, such as speed and energy, which act as objective functions to be optimized. Constraints on joint torques and angles are imposed quite easily. Predicting motion in this way allows one to use avatars to study how and why humans move the way they do, given specific scenarios. It also enables avatars to react to infinitely many scenarios with substantial autonomy. With this approach it is possible to predict dynamic motion without having to integrate equations of motion -- rather than solving equations of motion, this approach solves for a continuous time-dependent curve characterizing joint variables (also called joint profiles) for every degree of freedom. Introduces rigorous mathematical methods for digital human modelling and simulation Focuses on understanding and representing spatial relationships (3D) of biomechanics Develops an i...

  10. Simulations of Atmospheric Plasma Arcs

    Science.gov (United States)

    Pearcy, Jacob; Chopra, Nirbhav; Jaworski, Michael

    2017-10-01

    We present the results of computer simulation of cylindrical plasma arcs with characteristics similar to those predicted to be relevant in magnetohydrodynamic (MHD) power conversion systems. These arcs, with core temperatures on the order of 1 eV, place stringent limitations on the lifetime of conventional electrodes used in such systems, suggesting that a detailed analysis of arc characteristics will be crucial in designing more robust electrode systems. Simulations utilize results from NASA's Chemical Equilibrium with Applications (CEA) program to solve the Elenbaas-Heller equation in a variety of plasma compositions, including approximations of coal-burning plasmas as well as pure gas discharges. The effect of carbon dioxide injection on arc characteristics, emulating discharges from molten carbonate salt electrodes, is also analyzed. Results include radial temperature profiles, composition maps, and current-voltage (IV) characteristics of these arcs. Work supported by DOE contract DE-AC02-09CH11466.

  11. Modelling, simulating and optimizing Boilers

    DEFF Research Database (Denmark)

    Sørensen, Kim; Condra, Thomas Joseph; Houbak, Niels

    2003-01-01

    This paper describes the modelling, simulating and optimizing including experimental verication as being carried out as part of a Ph.D. project being written resp. supervised by the authors. The work covers dynamic performance of both water-tube boilers and re tube boilers. A detailed dynamic model...... of the boiler has been developed and simulations carried out by means of the Matlab integration routines. The model is prepared as a dynamic model consisting of both ordinary differential equations and algebraic equations, together formulated as a Differential-Algebraic- Equation system. Being able to operate...... freedom with respect to dynamic operation of the plant. By means of an objective function including as well the price of the plant as a quantication of the value of dynamic operation of the plant an optimization is carried out. The dynamic model of the boiler plant is applied to dene parts...

  12. MODELLING, SIMULATING AND OPTIMIZING BOILERS

    DEFF Research Database (Denmark)

    Sørensen, K.; Condra, T.; Houbak, Niels

    2003-01-01

    This paper describes the modelling, simulating and optimizing including experimental verification as being carried out as part of a Ph.D. project being written resp. supervised by the authors. The work covers dynamic performance of both water-tube boilers and fire tube boilers. A detailed dynamic...... model of the boiler has been developed and simulations carried out by means of the Matlab integration routines. The model is prepared as a dynamic model consisting of both ordinary differential equations and algebraic equations, together formulated as a Differential-Algebraic-Equation system. Being able...... freedom with respect to dynamic operation of the plant. By means of an objective function including as well the price of the plant as a quantification of the value of dynamic operation of the plant an optimization is carried out. The dynamic model of the boiler plant is applied to define parts...

  13. Review of Modelling Approaches for Healthcare Simulation

    Directory of Open Access Journals (Sweden)

    Bożena Mielczarek

    2016-01-01

    Full Text Available The goal of this paper is to present a summary of various simulation methods applied to health services and to discuss several internal and external determinants for selecting a particular simulation method to study a given managerial problem within the healthcare system. The analysis presented is based on a literature survey and considers four primary simulation techniques: Monte Carlo, discrete-event simulation, agent-based simulation and system dynamics. A range of internal and external factors are reviewed and characterised to determine the most suitable simulation technique for addressing a particular healthcare decision problem. (original abstract

  14. Multi-agent systems simulation and applications

    CERN Document Server

    Uhrmacher, Adelinde M

    2009-01-01

    Methodological Guidelines for Modeling and Developing MAS-Based SimulationsThe intersection of agents, modeling, simulation, and application domains has been the subject of active research for over two decades. Although agents and simulation have been used effectively in a variety of application domains, much of the supporting research remains scattered in the literature, too often leaving scientists to develop multi-agent system (MAS) models and simulations from scratch. Multi-Agent Systems: Simulation and Applications provides an overdue review of the wide ranging facets of MAS simulation, i

  15. Microgrid Modeling and Simulation Study

    Science.gov (United States)

    2016-09-01

    lightning , and other scenarios need to be simulated and hardware tested to characterize system robustness. The reviewed M&S tools were divided into the...5 capability categories for tactical microgrids: Demand Management, Power Distribution, Source Management, Communications, and Smart Controls. In...requires a short-term investment to produce results. • Component Metadata is the use of digital information from equipment for microgrid Smart

  16. Probabilistic anonymity via coalgebraic simulations

    OpenAIRE

    Hasuo, Ichiro; Kawabe, Yoshinobu; Sakurada, Hideki

    2010-01-01

    There is a growing concern about anonymity and privacy on the Internet, resulting in lots of work on formalization and verification of anonymity. In particular, the importance of probabilistic aspects of anonymity has recently been highlighted by many authors. Several different notions of “probabilistic anonymity” have been studied so far, but proof methods for such probabilistic notions have not yet been elaborated. In this paper we introduce a simulation-based proof method for one notion of...

  17. Simulation of Numerical Distance Relays

    OpenAIRE

    Sherwali, Hamid; Abdlrahem, Abdlmnam

    2010-01-01

    As modern numerical relays are widely employed in protection systems nowadays and modeling of these types of relays is important to adjust and settle protection equipment in electrical facilities and to train protection personnel, the simulation of distance relays using MATLAB offers a good opportunity to perform these activities efficiently and with minimum cost. Another advantages is that, as MATLAB is a powerful tool rich with component models, any shape of relay characteristic (Impedance,...

  18. Vehicle dynamics modeling and simulation

    CERN Document Server

    Schramm, Dieter; Bardini, Roberto

    2014-01-01

    The authors examine in detail the fundamentals and mathematical descriptions of the dynamics of automobiles. In this context different levels of complexity will be presented, starting with basic single-track models up to complex three-dimensional multi-body models. A particular focus is on the process of establishing mathematical models on the basis of real cars and the validation of simulation results. The methods presented are explained in detail by means of selected application scenarios.

  19. Galileo Signal Generation. Simulation Analysis

    OpenAIRE

    Canalda Pedrós, Roger

    2009-01-01

    Projecte realitzat eb col.laboració amb el Department of Computer and Electronic Engineering. University of Limerick This work presents the navigation signals and their allocation in the radio frequency band used in the new European Global Navigation Satellite System (GNSS): Galileo. All signals are described mathematically and then simulated using Matlab language (in transmission). Results are shown thus proving the theory provided by the European Space Agency document: “Open Service Sign...

  20. Telco Clouds: Modelling and Simulation

    OpenAIRE

    Krzywda, Jakub; Tärneberg, William; Östberg, Per-Olov; Kihl, Maria; Elmroth, Erik

    2015-01-01

    In this paper, we propose a telco cloud meta-model that can be used to simulate different infrastructure con- figurations and explore their consequences on the system performance and costs. To achieve this, we analyse current telecommunication and data centre infrastructure paradigms, describe the architecture of the telco cloud and detail the benefits of merging both infrastructures in a unified system. Next, we detail the dynamics of the telco cloud and identify the components that are the ...

  1. Computer simulation of electron beams

    Energy Technology Data Exchange (ETDEWEB)

    Sabchevski, S.P.; Mladenov, G.M. (Bylgarska Akademiya na Naukite, Sofia (Bulgaria). Inst. po Elektronika)

    1994-04-14

    Self-fields and forces as well as the local degree of space-charge neutralization in overcompensated electron beams are considered. The radial variation of the local degree of space-charge neutralization is analysed. A novel model which describes the equilibrium potential distribution in overcompensated beams is proposed and a method for computer simulation of the beam propagation is described. Results from numerical experiments which illustrate the propagation of finite emittance overneutralized beams are presented. (Author).

  2. The Mars Gravity Simulation Project

    Science.gov (United States)

    Korienek, Gene

    1998-10-01

    Human beings who make abrupt transitions between one gravitational environment and another undergo severe disruptions of their visual perception and visual- motor coordination, frequently accompanied by "space sickness." Clearly, such immediate effects of exposure to a novel gravitational condition have significant implications for human performance. For example, when astronauts first arrive in Earth orbit their attempts to move about in the spacecraft and to perform their duties are uncoordinated, inaccurate, and inefficient. Other inter-gravitational transitions for which these difficulties can be expected include going from the 0 g of the spacecraft to the. 16 g of the Moon, from 0 g to the .38 g of Mars, and from 0 g back to the 1.0 g of Earth. However, after astronauts have actively interacted with their new gravitational environment for several days, these problems tend to disappear, evidence that some sort of adaptive process has taken place. It would be advantageous, therefore, if there were some way to minimize or perhaps even to eliminate this potentially hazardous adaptive transition period by allowing astronauts to adapt to the altered gravitational conditions before actually entering them. Simultaneous adaptations to both the altered and the normal gravitational environment as a result of repeatedly adapting to one and readapting to the other, a phenomenon known as dual adaptation. The objective of the Mars Gravity Simulator (MGS) Project is to construct a simulation of the visual and bodily effects of altered gravity. This perceptual-motor simulation is created through the use of: 1) differential body pressure to produce simulated hypo-gravity and 2) treadmill-controlled virtual reality to create a corresponding visual effect. It is expected that this combination will produce sensory motor perturbations in the subjects. Both the immediate and adaptive behavioral (postural and ambulatory) responses to these sensory perturbations will be assessed.

  3. Multi-filter spectrophotometry simulations

    Science.gov (United States)

    Callaghan, Kim A. S.; Gibson, Brad K.; Hickson, Paul

    1993-01-01

    To complement both the multi-filter observations of quasar environments described in these proceedings, as well as the proposed UBC 2.7 m Liquid Mirror Telescope (LMT) redshift survey, we have initiated a program of simulated multi-filter spectrophotometry. The goal of this work, still very much in progress, is a better quantitative assessment of the multiband technique as a viable mechanism for obtaining useful redshift and morphological class information from large scale multi-filter surveys.

  4. Early BHs: simulations and observations

    Science.gov (United States)

    Cappelluti, Nico; di-Matteo, Tiziana; Schawinski, Kevin; Fragos, Tassos

    We report recent investigations in the field of Early Black Holes. We summarize recent theoretical and observational efforts to understand how Black Holes formed and eventually evolved into Super Massive Black Holes at high-z. This paper makes use of state of the art computer simulations and multiwavelength surveys. Although non conclusive, we present results and hypothesis that pose exciting challenges to modern astrophysics and to future facilities.

  5. Building America House Simulation Protocols

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engebrecht, Cheryn [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2010-09-01

    The House Simulation Protocol document was developed to track and manage progress toward Building America's multi-year, average whole-building energy reduction research goals for new construction and existing homes, using a consistent analytical reference point. This report summarizes the guidelines for developing and reporting these analytical results in a consistent and meaningful manner for all home energy uses using standard operating conditions.

  6. Computer Systems/Database Simulation.

    Science.gov (United States)

    1978-10-15

    defined distribution of inter-arrival times. Hence the process of model building and execution is considerably eased with the help of simulation langauges ...the hands of only the data creater need not be forwarded to the data user. This removes both JCL and format diffi-- culties from the users domain . 3...emulators avail- iblte on any machine for most source langauges .) Lower level languages, such as Assembler or Macro-like code will always be machine

  7. Computer simulation of nonequilibrium processes

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, D.C.

    1985-07-01

    The underlying concepts of nonequilibrium statistical mechanics, and of irreversible thermodynamics, will be described. The question at hand is then, how are these concepts to be realize in computer simulations of many-particle systems. The answer will be given for dissipative deformation processes in solids, on three hierarchical levels: heterogeneous plastic flow, dislocation dynamics, an molecular dynamics. Aplication to the shock process will be discussed.

  8. Atomistic Simulations of Bicelle Mixtures

    OpenAIRE

    Jiang, Yong; Wang, Hao; Kindt, James T.

    2010-01-01

    Mixtures of long- and short-tail phosphatidylcholine lipids are known to self-assemble into a variety of aggregates combining flat bilayerlike and curved micellelike features, commonly called bicelles. Atomistic simulations of bilayer ribbons and perforated bilayers containing dimyristoylphosphatidylcholine (DMPC, di-C14 tails) and dihexanoylphosphatidylcholine (DHPC, di-C6 tails) have been carried out to investigate the partitioning of these components between flat and curved microenvironmen...

  9. Complex systems models: engineering simulations

    OpenAIRE

    Polack, Fiona A. C.; Hoverd, Tim; Sampson, Adam T.; Stepney, Susan; Timmis, Jon,

    2008-01-01

    As part of research towards the CoSMoS unified infrastructure for modelling and simulating complex systems, we review uses of definitional and descriptive models in natural science and computing, and existing integrated platforms. From these, we identify requirements for engineering models of complex systems, and consider how some of the requirements could be met, using state-of-the-art model management and a mobile, process-oriented computing paradigm.

  10. DEFECTS SIMULATION OF ROLLING STRIP

    OpenAIRE

    Rudolf Mišičko; Tibor Kvačkaj; Martin Vlado; Lucia Gulová; Miloslav Lupták; Jana Bidulská

    2009-01-01

    The defects in the continuous casting slabs can be developed or kept down in principle by rolling technology, especially depend to sort, size and distribution of primary defects, as well as used of rolling parameters. Scope of the article is on observation behavior artificial surface and undersurface defects (scores) without filler (surface defects) and filling by oxides and casting powder (subsurface defects). First phase of hot rolling process have been done by software simulation DEFORM 3D...

  11. Simulation of Transient Viscoelastic Flow

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz; Hassager, Ole

    1993-01-01

    The Lagrangian kinematic description is used to develop a numerical method for simulation of time-dependent flow of viscoelastic fluids described by integral models. The method is shown to converge to first order in the time step and at least second order in the spatial discretization. The method...... is tested on the established sphere in a cylinder benchmark problem, and an extension of the problem to transient flow is proposed....

  12. Reversible simulations of elastic collisions

    Energy Technology Data Exchange (ETDEWEB)

    Perumalla, Kalyan S.; Protopopescu, Vladimir A.

    2013-05-01

    Consider a system of N identical hard spherical particles moving in a d-dimensional box and undergoing elastic, possibly multi-particle, collisions. We develop a new algorithm that recovers the pre-collision state from the post-collision state of the system, across a series of consecutive collisions, \\textit{with essentially no memory overhead}. The challenge in achieving reversibility for an n-particle collision (where, in general, n<< N) arises from the presence of nd-d-1 degrees of freedom (arbitrary angles) during each collision, as well as from the complex geometrical constraints placed on the colliding particles. To reverse the collisions in a traditional simulation setting, all of the particular realizations of these degrees of freedom (angles) during the forward simulation must be tracked. This requires memory proportional to the number of collisions, which grows very fast with N and d, thereby severely limiting the \\textit{de facto} applicability of the scheme. This limitation is addressed here by first performing a pseudo-randomization of angles, which ensures determinism in the reverse path for any values of n and d. To address the more difficult problem of geometrical and dynamic constraints, a new approach is developed which correctly samples the constrained phase space. Upon combining the pseudo-randomization with correct phase space sampling, perfect reversibility of collisions is achieved, as illustrated for n<=3, d=2, and n=2, d=3. This result enables, for the first time, reversible simulations of elastic collisions with essentially zero memory accumulation. In principle, the approach presented here could be generalized to larger values of n, which would be of definite interest for molecular dynamics simulations at high densities.

  13. Field theory, disorder and simulations

    CERN Document Server

    Parisi, Giorgio

    1992-01-01

    This volume is a collection of lectures and selected papers by Giorgio Parisi on the subjects of Field Theory (perturbative expansions, nonperturbative phenomena and phase transitions), Disordered Systems (mainly spin glasses) and Computer Simulations (lattice gauge theories).The basic problems discussed in the Field Theory section concern the interplay between perturbation theory and nonperturbative phenomena which are present when one deals with infrared or ultraviolet divergences or with nonconvergent perturbative expansions. The section on Disordered Systems contains a complete discussion

  14. The First Drinking Simulator Unit

    Directory of Open Access Journals (Sweden)

    Saied Mostafa Moazzami

    2014-03-01

    Full Text Available Introduction: Current Thermal cycling units fail to simulate the drinking behaviors, and oral balancing temperature. They cannot also simulate other oral conditions such as drink coloring, and chemicals like tea, coffee, carbonated and noncarbonated, citrus juices as well as alcoholic and nonalcoholic drinks and also saliva and milk itself. The main objective of this study is to introduce the designing and manufacturing the first Drinking Simulator Unit (DSU that reproduces the thermal, color and chemicalcycling as well as the drinking behavior and oral temperature in lab conditions uniquely. Methods: The invented system generally has two parts: the hardware and the software parts. The hardware consists of the mechanical and electronic parts. The software part is responsible for controlling the heating and cooling systems, electric valves, the pumps, and automatic filling systems of tanks as well as the sensors of the machine. Results: DSU is the first unit can reproduce the thermal, color and chemical cycling as well as the drinking behavior and oral temperature in lab conditions. Different kinds of colored and acidic drinks and also other chemical materials such as bleaching substances as well as detergents and antiseptics used for dentistry, industrial and medical purposes can be tested by DSU. DSU has also to be considered as an appliance performing in-vitro researches on dental structures. Conclusion: The invented system can greatly improve and validate the results of such researches.  

  15. QUEST: QUantum Electron Simulation Toolbox

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Roger Che-Rung [National Tsing Hua University, Taiwan; Chiesa, Simone [ORNL; Varney, Christopher N [ORNL; Khatami, Ehsan [Georgetown University; Bai, Zhaojun [University of California, Davis; D' Azevedo, Ed F [ORNL; Jarrell, Mark [Louisiana State University; Maier, Thomas A [ORNL; Savrasov, Sergey [ORNL; Scalettar, Richard [University of California, Davis; Tomko, Karen [Ohio Supercomputer Center

    2010-01-01

    QUEST is a part of the SciDAC project on next generation multi-scale quantum simulation software for strongly correlated materials. It is a Fortran 90/95 package that implements the determinant quantum Monte Carlo (DQMC) method for simulation of magnetic, superconducting, and metal-insulator transitions in model Hamiltonians. In this paper, we show how QUEST is capable of treating lattices of unprecedentedly large sizes and how this can be fruitful in the study of the physics of trapped fermionic system, in the development of more efficient solvers for Dynamical Mean Field Theory (DMFT) and as a tool to test and, in the future, improve diagrammatic approaches such as the Parquet approximation. We will also present a range of synergistic activities on the development of stable and robust numerical algorithms and hybrid granularity parallelization scheme that combines algorithmic and implementation techniques to high-performance DQMC simulation. The work reported here is a key step forward in achieving the goals of our SciDAC project.

  16. Otto engine simulation in Dymola

    Energy Technology Data Exchange (ETDEWEB)

    Egnell, R.

    1999-01-01

    A component library for otto engines has been developed in Dymola and three otto engines have been built using these components. This work has been part of a bigger project of which the goal is to develop the structure of a vehicle simulation program package and, in the process, evaluate different commercially available simulation tools. In order to develop the vehicle simulation package models of the various subsystems and components must be available to define the interface between them. The Otto engine models developed for this purpose are based on steady state measurements of performance and emissions. The steady state input is however corrected with respect to the actual transient conditions. In order to achieve this a lot of attention has been paid to the factors influencing the lambda excursions. Three main factors have been identified. They are: 1. Bad synchronization between the air and the fuel flow entering the engine., 2. Fuel wetting of the inlet port walls., 3. The delay time in the lambda control feed back loop

  17. Virtual simulation tools for artillery

    Science.gov (United States)

    Gozard, Patrick; Bret, Emmanuel; Cathala, Thierry

    2008-04-01

    To perform multi-sensors simulations, the French DGA/DET (Directorate for Technical Evaluation of the French Ministry of Defense) uses CHORALE (simulated Optronic Acoustic Radar battlefield). CHORALE enables the user to create virtual and realistic multi spectral 3D scenes, and generates the physical signal received by one or several sensors, typically an IR sensor or an acoustic sensor. This article presents different kinds of scenario such as desert, urban, campaign place to evaluate intelligent artillery ammunition. The ammunition described has to detect thermal contrast above a target area for the detection capability and firing decision. The scene is as realistic as possible to give to french army good parameters according to their request in a typical operational scenario. That includes background with trees, houses, roads, fields, targets, dunes, with different materials such as grass, sand, rock, wood, concrete... All object in the 3D scene is characterized by optronic parameters used by CHORALE Workbench. The signal provided by this workbench is adapted by AMOCO workbench which allows defining sensor technology. Then a process unit provides the firing decision and the lethality data from the target which has been reached. Each tool is explained to understand the physics phenomena in the scene to take into account atmospheric transmission, radiative parameters of objects and counter-measure devices. Finally, this paper shows results by coupling the operational scenario with sensor model to do a global simulation in order to determine global performances of artillery ammunition.

  18. Computer simulations applied in materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This workshop takes stock of the simulation methods applied to nuclear materials and discusses the conditions in which these methods can predict physical results when no experimental data are available. The main topic concerns the radiation effects in oxides and includes also the behaviour of fission products in ceramics, the diffusion and segregation phenomena and the thermodynamical properties under irradiation. This document brings together a report of the previous 2002 workshop and the transparencies of 12 presentations among the 15 given at the workshop: accommodation of uranium and plutonium in pyrochlores; radiation effects in La{sub 2}Zr{sub 2}O{sub 7} pyrochlores; first principle calculations of defects formation energies in the Y{sub 2}(Ti,Sn,Zr){sub 2}O{sub 7} pyrochlore system; an approximate approach to predicting radiation tolerant materials; molecular dynamics study of the structural effects of displacement cascades in UO{sub 2}; composition defect maps for A{sup 3+}B{sup 3+}O{sub 3} perovskites; NMR characterization of radiation damaged materials: using simulation to interpret the data; local structure in damaged zircon: a first principle study; simulation studies on SiC; insertion and diffusion of He in 3C-SiC; a review of helium in silica; self-trapped holes in amorphous silicon dioxide: their short-range structure revealed from electron spin resonance and optical measurements and opportunities for inferring intermediate range structure by theoretical modelling. (J.S.)

  19. Realistic Simulation of Rice Plant

    Directory of Open Access Journals (Sweden)

    Wei-long DING

    2011-09-01

    Full Text Available The existing research results of virtual modeling of rice plant, however, is far from perfect compared to that of other crops due to its complex structure and growth process. Techniques to visually simulate the architecture of rice plant and its growth process are presented based on the analysis of the morphological characteristics at different stages. Firstly, the simulations of geometrical shape, the bending status and the structural distortion of rice leaves are conducted. Then, by using an improved model for bending deformation, the curved patterns of panicle axis and various types of panicle branches are generated, and the spatial shape of rice panicle is therefore created. Parametric L-system is employed to generate its topological structures, and finite-state automaton is adopted to describe the development of geometrical structures. Finally, the computer visualization of three-dimensional morphologies of rice plant at both organ and individual levels is achieved. The experimental results showed that the proposed methods of modeling the three-dimensional shapes of organs and simulating the growth of rice plant are feasible and effective, and the generated three-dimensional images are realistic.

  20. Electromagnetic gyrokinetic simulation in GTS

    Science.gov (United States)

    Ma, Chenhao; Wang, Weixing; Startsev, Edward; Lee, W. W.; Ethier, Stephane

    2017-10-01

    We report the recent development in the electromagnetic simulations for general toroidal geometry based on the particle-in-cell gyrokinetic code GTS. Because of the cancellation problem, the EM gyrokinetic simulation has numerical difficulties in the MHD limit where k⊥ρi -> 0 and/or β >me /mi . Recently several approaches has been developed to circumvent this problem: (1) p∥ formulation with analytical skin term iteratively approximated by simulation particles (Yang Chen), (2) A modified p∥ formulation with ∫ dtE∥ used in place of A∥ (Mishichenko); (3) A conservative theme where the electron density perturbation for the Poisson equation is calculated from an electron continuity equation (Bao) ; (4) double-split-weight scheme with two weights, one for Poisson equation and one for time derivative of Ampere's law, each with different splits designed to remove large terms from Vlasov equation (Startsev). These algorithms are being implemented into GTS framework for general toroidal geometry. The performance of these different algorithms will be compared for various EM modes.

  1. Parallel circuit simulation on supercomputers

    Energy Technology Data Exchange (ETDEWEB)

    Saleh, R.A.; Gallivan, K.A. (Illinois Univ., Urbana, IL (USA). Center for Supercomputing Research and Development); Chang, M.C. (Texas Instruments, Inc., Dallas, TX (USA)); Hajj, I.N.; Trick, T.N. (Illinois Univ., Urbana, IL (USA). Coordinated Science Lab.); Smart, D. (Semiconductor Div., Analog Devices, Wilmington, MA (US))

    1989-12-01

    Circuit simulation is a very time-consuming and numerically intensive application, especially when the problem size is large as in the case of VLSI circuits. To improve the performance of circuit simulators without sacrificing accuracy, a variety of parallel processing algorithms have been investigated due to the recent availability of a number of commercial multiprocessor machines. In this paper, research in the field of parallel circuit simulation is surveyed and the ongoing research in this area at the University of Illinois is described. Both standard and relaxation-based approaches are considered. In particular, the forms of parallelism available within the direct method approach, used in programs such as SPICE2 and SLATE, and within the relaxation-based approaches, such as waveform relaxation, iterated timing analysis, and waveform-relaxation-Newton, are described. The specific implementation issues addressed here are primarily related to general-purpose multiprocessors with a shared-memory architecture having a limited number of processors, although many of the comments also apply to a number of other architectures.

  2. Fusion Simulation Project Workshop Report

    Science.gov (United States)

    Kritz, Arnold; Keyes, David

    2009-03-01

    The mission of the Fusion Simulation Project is to develop a predictive capability for the integrated modeling of magnetically confined plasmas. This FSP report adds to the previous activities that defined an approach to integrated modeling in magnetic fusion. These previous activities included a Fusion Energy Sciences Advisory Committee panel that was charged to study integrated simulation in 2002. The report of that panel [Journal of Fusion Energy 20, 135 (2001)] recommended the prompt initiation of a Fusion Simulation Project. In 2003, the Office of Fusion Energy Sciences formed a steering committee that developed a project vision, roadmap, and governance concepts [Journal of Fusion Energy 23, 1 (2004)]. The current FSP planning effort involved 46 physicists, applied mathematicians and computer scientists, from 21 institutions, formed into four panels and a coordinating committee. These panels were constituted to consider: Status of Physics Components, Required Computational and Applied Mathematics Tools, Integration and Management of Code Components, and Project Structure and Management. The ideas, reported here, are the products of these panels, working together over several months and culminating in a 3-day workshop in May 2007.

  3. Are We Sims? How Computer Simulations Represent and What This Means for the Simulation Argument

    OpenAIRE

    Beisbart, Claus

    2017-01-01

    N. Bostrom's simulation argument and two additional assumptions imply that we likely live in a computer simulation. The argument is based upon the following assumption about the workings of realistic brain simulations: The hardware of a computer on which a brain simulation is run bears a close analogy to the brain itself. To inquire whether this is so, I analyze how computer simulations trace processes in their targets. I describe simulations as fictional, mathematical, pictorial, and materia...

  4. Comparison Of Simulation Results When Using Two Different Methods For Mold Creation In Moldflow Simulation

    Directory of Open Access Journals (Sweden)

    Kaushikbhai C. Parmar

    2017-04-01

    Full Text Available Simulation gives different results when using different methods for the same simulation. Autodesk Moldflow Simulation software provide two different facilities for creating mold for the simulation of injection molding process. Mold can be created inside the Moldflow or it can be imported as CAD file. The aim of this paper is to study the difference in the simulation results like mold temperature part temperature deflection in different direction time for the simulation and coolant temperature for this two different methods.

  5. Cyclone Simulation via Action Minimization

    Science.gov (United States)

    Plotkin, D. A.; Weare, J.; Abbot, D. S.

    2016-12-01

    A postulated impact of climate change is an increase in intensity of tropical cyclones (TCs). This hypothesized effect results from the fact that TCs are powered subsaturated boundary layer air picking up water vapor from the surface ocean as it flows inwards towards the eye. This water vapor serves as the energy input for TCs, which can be idealized as heat engines. The inflowing air has a nearly identical temperature as the surface ocean; therefore, warming of the surface leads to a warmer atmospheric boundary layer. By the Clausius-Clapeyron relationship, warmer boundary layer air can hold more water vapor and thus results in more energetic storms. Changes in TC intensity are difficult to predict due to the presence of fine structures (e.g. convective structures and rainbands) with length scales of less than 1 km, while general circulation models (GCMs) generally have horizontal resolutions of tens of kilometers. The models are therefore unable to capture these features, which are critical to accurately simulating cyclone structure and intensity. Further, strong TCs are rare events, meaning that long multi-decadal simulations are necessary to generate meaningful statistics about intense TC activity. This adds to the computational expense, making it yet more difficult to generate accurate statistics about long-term changes in TC intensity due to global warming via direct simulation. We take an alternative approach, applying action minimization techniques developed in molecular dynamics to the WRF weather/climate model. We construct artificial model trajectories that lead from quiescent (TC-free) states to TC states, then minimize the deviation of these trajectories from true model dynamics. We can thus create Monte Carlo model ensembles that are biased towards cyclogenesis, which reduces computational expense by limiting time spent in non-TC states. This allows for: 1) selective interrogation of model states with TCs; 2) finding the likeliest paths for

  6. Advancing renal education: hybrid simulation, using simulated patients to enhance realism in haemodialysis education.

    Science.gov (United States)

    Dunbar-Reid, Kylie; Sinclair, Peter M; Hudson, Denis

    2015-06-01

    Simulation is a well-established and proven teaching method, yet its use in renal education is not widely reported. Criticisms of simulation-based teaching include limited realism and a lack of authentic patient interaction. This paper discusses the benefits and challenges of high-fidelity simulation and suggests hybrid simulation as a complementary model to existing simulation programmes. Through the use of a simulated patient, hybrid simulation can improve the authenticity of renal simulation-based education while simultaneously teaching and assessing technologically enframed caring. © 2015 European Dialysis and Transplant Nurses Association/European Renal Care Association.

  7. OpenSimulator Interoperability with DRDC Simulation Tools: Compatibility Study

    Science.gov (United States)

    2014-09-01

    Cinema 4D, 3D Studio Max, Cheetah3D, Modo, Lightwave and Blender. Intergraph’s SmartMarine 3D and SmartPlant 3D ship and plant design software...modeling and animation software, 3D Studio Max (3DS Max) is a ubiquitous and common application for the development of 3D assets for gaming and simulation...to COLLADA using SketchUp The 3D modeling and animation software, SketchUp (owned by Google between 2006 and 2012, now by Trimble Navigation) is

  8. Development of IR imaging system simulator

    Science.gov (United States)

    Xiang, Xinglang; He, Guojing; Dong, Weike; Dong, Lu

    2017-02-01

    To overcome the disadvantages of the tradition semi-physical simulation and injection simulation equipment in the performance evaluation of the infrared imaging system (IRIS), a low-cost and reconfigurable IRIS simulator, which can simulate the realistic physical process of infrared imaging, is proposed to test and evaluate the performance of the IRIS. According to the theoretical simulation framework and the theoretical models of the IRIS, the architecture of the IRIS simulator is constructed. The 3D scenes are generated and the infrared atmospheric transmission effects are simulated using OGRE technology in real-time on the computer. The physical effects of the IRIS are classified as the signal response characteristic, modulation transfer characteristic and noise characteristic, and they are simulated on the single-board signal processing platform based on the core processor FPGA in real-time using high-speed parallel computation method.

  9. On Open- source Multi-robot simulators

    CSIR Research Space (South Africa)

    Namoshe, M

    2008-07-01

    Full Text Available Open source software simulators play a major role in robotics design and research as platforms for developing, testing and improving architectures, concepts and algorithms for cooperative/multi-robot systems. Simulation environment enables control...

  10. SDL-based network performance simulation

    Science.gov (United States)

    Yang, Yang; Lu, Yang; Lin, Xiaokang

    2005-11-01

    Specification and description language (SDL) is an object-oriented formal language defined as a standard by ITU-T. Though SDL is mainly used in describing communication protocols, it is an efficient way to simulate the network performance with SDL tools according to our experience. This paper presents our methodology of SDL-based network performance simulation in such aspects as the simulation platform, the simulation modes and the integrated simulation environment. Note that Telelogic Tau 4.3 SDL suite is used here as the simulation environment though our methodology isn't limited to the software. Finally the SDL-based open shortest path first (OSPF) performance simulation in the wireless private network is illustrated as an example of our methodology, which indicates that SDL is indeed an efficient language in the area of the network performance simulation.

  11. Distributed simulation a model driven engineering approach

    CERN Document Server

    Topçu, Okan; Oğuztüzün, Halit; Yilmaz, Levent

    2016-01-01

    Backed by substantive case studies, the novel approach to software engineering for distributed simulation outlined in this text demonstrates the potent synergies between model-driven techniques, simulation, intelligent agents, and computer systems development.

  12. Simulations, serious games and their applications

    CERN Document Server

    Goei, Sui

    2014-01-01

    This book presents the state of the art technology in Serious Games which is driven extensive by applications and research in simulation. The topics in this book include: (1) Fashion simulation; (2) Chinese calligraphy ink diffusion simulation; (3) Rehabilitation (4) Long vehicle turning simulation; (5) Marine traffic conflict control; (6) CNC simulation; (7) Special needs education. The book also addresses the fundamental issues in Simulation and Serious Games such as rapid collision detection, game engines or game development platforms. The target audience for this book includes scientists, engineers and practitioners involved in the field of Serious Games and Simulation. The major part of this book comprises of papers presented at the 2012 Asia-Europe Workshop on Serious Games and Simulation held in Nanyang Technological University, Singapore (May 9, 2012).  All the contributions have been peer reviewed and by scientific committee members with report about quality, content and originality.

  13. Finite Element Aircraft Simulation of Turbulence

    Science.gov (United States)

    1997-02-01

    A Simulation of Rotor Blade Element Turbulence (SORBET) model has been : developed for realtime aircraft simulation that accommodates stochastic : turbulence and distributed discrete gusts as a function of the terrain. This : model is applicable to c...

  14. Astronaut Neil Armstrong participates in simulation training

    Science.gov (United States)

    1969-01-01

    Astronaut Neil A. Armstrong, Apollo 11 commander, participates in simulation training in preparation for the scheduled lunar landing mission. He is in the Apollo Lunar Module Mission SImulator in the Kennedy Space Center's Flight Crew Training Building.

  15. Upgrading the ATLAS fast calorimeter simulation

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00032940; The ATLAS collaboration

    2016-01-01

    Many physics and performance studies with the ATLAS detector at the Large Hadron Collider require very large samples of simulated events, and producing these using the full GEANT4 detector simulation is highly CPU intensive. Often, a very detailed detector simulation is not needed, and in these cases fast simulation tools can be used to reduce the calorimeter simulation time. In ATLAS, a fast simulation of the calorimeter systems was developed, called Fast Calorimeter Simulation (FastCaloSim). It provides a parametrized simulation of the particle energy response at the calorimeter read-out cell level. It is interfaced to the standard ATLAS digitization and reconstruction software, and can be tuned to data more easily than with GEANT4. An improved parametrization is being developed, to eventually address shortcomings of the original version. It makes use of statistical techniques such as principal component analysis, and a neural network parametrization to optimise the amount of information to store in the ATL...

  16. Modular PEM Fuel Cell SCADA & Simulator System

    National Research Council Canada - National Science Library

    Francisca Segura; Jose Manuel Andújar

    2015-01-01

      The paper presents a Supervision, Control, Data Acquisition and Simulation (SCADA & Simulator) system that allows for real-time training in the actual operation of a modular PEM fuel cell system...

  17. Measurement of effectiveness for training simulations

    NARCIS (Netherlands)

    Korteling, J.E.; Oprins, E.A.P.B.; Kallen, V.L.

    2013-01-01

    This paper presents and discusses experimental designs, measures, and measurement methods for determining the effectiveness of training simulators. First, we describe experimental designs in which training effects of training simulators are compared to those of conventional training. Next, the most

  18. Using Simulation in Selecting a Sales Force.

    Science.gov (United States)

    Marshall, Sandra; Hollenbeck, George

    1981-01-01

    Describes Merrill Lynch's Account Executive Simulation Exercise: a three-hour simulation designed to evaluate job applicants' potential for success as account executives from their performance in the role of an account executive. (CT)

  19. Simulation strategies for the LHC ATLAS experiment

    CERN Document Server

    Buckley, A; The ATLAS collaboration

    2010-01-01

    The ATLAS experiment, operational at the new LHC collider, is fully simulated using the Geant4 tool. The simulation program has been built within the ATLAS common framework Athena. The simulation software for the ATLAS Experiment at the Large Hadron Collider is being used for large-scale production of events on the LHC Computing Grid. This simulation requires many components, from the generators that simulate particle collisions, through packages simulating the response of the various detectors and triggers. All of these components come together under the ATLAS simulation infrastructure. The latest developments went into the direction to better represent the reality of the detector in all the possible details. The latest developments provide increased functionality and robustness. The full process is constantly monitored and profiled. Increased performance guarantee the best use of available resources without any degradation in the quality and accuracy of the simulation itself. In the presentation emphasis is...

  20. Accomplishments and challenges of surgical simulation.

    Science.gov (United States)

    Satava, R M

    2001-03-01

    For nearly a decade, advanced computer technologies have created extraordinary educational tools using three-dimensional (3D) visualization and virtual reality. Pioneering efforts in surgical simulation with these tools have resulted in a first generation of simulators for surgical technical skills. Accomplishments include simulations with 3D models of anatomy for practice of surgical tasks, initial assessment of student performance in technical skills, and awareness by professional societies of potential in surgical education and certification. However, enormous challenges remain, which include improvement of technical fidelity, standardization of accurate metrics for performance evaluation, integration of simulators into a robust educational curriculum, stringent evaluation of simulators for effectiveness and value added to surgical training, determination of simulation application to certification of surgical technical skills, and a business model to implement and disseminate simulation successfully throughout the medical education community. This review looks at the historical progress of surgical simulators, their accomplishments, and the challenges that remain.

  1. Modeling and Simulation at Tidewater Community College

    Science.gov (United States)

    Summers, Michael

    2008-01-01

    Investment of $1.5 million in medical simulation technology. Integration of medical simulation activities into the curriculum. Support from TCC leadership. Individual and team activities. Skill development and critical thinking/problem solving skills.

  2. ATLAS Pile-up and Overlay Simulation

    CERN Document Server

    Novak, Tadej; The ATLAS collaboration

    2017-01-01

    The high luminosity of the LHC results in a significant background to interesting physics events known as pile-up. ATLAS uses several methods for simulating the effects of pile-up. The mostly used method is a direct simulation of background events where multiple simulated background events are combined for each physics event. For some physics processes, a more accurate simulation can be achieved by overlaying real proton-proton collisions on a simulated hard-scatter process. Overlay is also being investigated for a premixed pile-up background to reduce CPU usage and I/O stress during the simulation. Embedding replaces the muons found in Z→mumu decays in data with simulated taus at the same 4-momenta, thus preserving the underlying event and pileup from the original data event. This talk compares the pile-up simulation methods used at the ATLAS experiment pointing their benefits and drawbacks.

  3. Detached eddy simulation and large eddy simulation models for the simulation of gas entrainment

    Energy Technology Data Exchange (ETDEWEB)

    Merzari, E.; Ninokata, H. [Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, Tokyo (Japan); Baglietto, E. [CD-adapco, New York, NY (United States)

    2007-07-01

    The eventual entrainment of gas bubbles in the reactor core of a Light Metal Fast Breeder Reactors (LMFBR) may cause an effective increase in reactivity as in the current state of the art since LMFBRs have usually a positive void coefficient. Since this may have a negative effect on safety and operation, the possibility of gas entrainment needs to be evaluated in the thermohydraulics design. Several studies on the gas entrainment in a LMFBR system have been conducted over the years. The most common situations that may lead to gas entrainment have been classified into vortex dimple, concave free surface and breaking wave. Among these, the vortex-induced gas entrainment phenomenon is considered in the present work, because more likely to be present in operating or accidental conditions. The focus is on the issue of turbulence modeling for the simulation of gas-driving vortexes, and in particular for the benchmark case of Moriya. We will propose two different approaches: a large eddy simulation and a detached eddy simulation. Results are in excellent agreement with the experiment for the radial velocity even if no surface model has been employed. (authors)

  4. Simulation of Stochastic Loads for Fatigue Experiments

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Brincker, Rune

    A simple direct simulation method for stochastic fatigue load generation is described in this paper. The simulation method is based on the assumption that only the peaks of the load process significantly affect the fatigue life. The method requires the conditional distribution functions of load...... second using an IBM PC. Finally the proposed simulation method for fatigue load generation is tested by comparing some fatigue damage measures obtained by the simulation methods....

  5. Techniques for Binary Black Hole Simulations

    Science.gov (United States)

    Baker, John G.

    2006-01-01

    Recent advances in techniques for numerical simulation of black hole systems have enabled dramatic progress in astrophysical applications. Our approach to these simulations, which includes new gauge conditions for moving punctures, AMR, and specific tools for analyzing black hole simulations, has been applied to a variety of black hole configurations, typically resulting in simulations lasting several orbits. I will discuss these techniques, what we've learned in applications, and outline some areas for further development.

  6. Labotratory Simulation Experiments of Cometary Plasma

    OpenAIRE

    MINAMI, S.; Baum, P. J.; Kamin, G.; White, R. S.; 南, 繁行

    1986-01-01

    Laboratory simulation experiment to study the interaction between a cometary plasma and the solar wind has been performed using the UCR-T 1 space simulation facility at the Institute of Geophysics and Planetary Physics, the University of California, Riverside. Light emitting plasma composed of Sr, Ba and/or C simulating cometary coma plasma is produced by a plasma emitter which interacts with intense plasma flow produced by a co-axial plasma gun simulating the solar wind. The purpose of this ...

  7. Simulating the Sulphur Lamp with PLASIMO, a plasma simulation model.

    Science.gov (United States)

    Johnston, C. W.; van der Heijden, H.; van Dijk, Jan; van der Mullen Joost

    1999-10-01

    Several electrodeless lamps are currently available on the market. Examples of these are the Philips QL, Osrams Endura and GE's Genura. While these lamps make use of induction as a means of power coupling, the source of their light, namely mercury, remains the same as in older lamps. Another electrodeless configuration is the microwave powered Sulphur Lamp. Sulphur lighting has several advantages over other lamp systems. Firstly, large fluxes (≈100,000 lm) of high quality light are obtained with circuit efficacies of up to 60 percent. Secondly, unlike fluorescent and HID lamps there is no decrease in brightness with time since phospors and electrodes are not needed. Another significant aspect of the sulphur lamp is that it contains no mercury, lessening environmental hazards associated with disposal. In order to simulate the operation of this light source, PLASIMO, a plasma modeling tool which was developed at the Eindhoven University of Technology, was used. Modules were included to describe the transport properties and power in- coupling. Results of the simulations will be shown and compared with experiment.

  8. Scalable Open Source Smart Grid Simulator (SGSim)

    DEFF Research Database (Denmark)

    Ebeid, Emad Samuel Malki; Jacobsen, Rune Hylsberg; Stefanni, Francesco

    2017-01-01

    . This paper presents an open source smart grid simulator (SGSim). The simulator is based on open source SystemC Network Simulation Library (SCNSL) and aims to model scalable smart grid applications. SGSim has been tested under different smart grid scenarios that contain hundreds of thousands of households...

  9. Aircraft Performance for Open Air Traffic Simulations

    NARCIS (Netherlands)

    Metz, I.C.; Hoekstra, J.M.; Ellerbroek, J.; Kugler, D.

    2016-01-01

    The BlueSky Open Air Tra_c Simulator developed by the Control & Simulation section of TU Delft aims at supporting research for analysing Air Tra_c Management concepts by providing an open source simulation platform. The goal of this study was to complement BlueSky with aircraft performance

  10. Using Simulations in the Marketing Classroom

    Science.gov (United States)

    Kietzmann, Jan; Pitt, Leyland

    2016-01-01

    This special issue of "Journal of Marketing Education" was intended to engage as broad a perspective on simulations in the marketing classroom as possible. While some of the articles deal with the use of computerized marketing simulations, there are also articles that view simulations as imitating and pretending. The evidence from the…

  11. Constrained Optimization in Simulation : A Novel Approach

    NARCIS (Netherlands)

    Kleijnen, J.P.C.; van Beers, W.C.M.; van Nieuwenhuyse, I.

    2008-01-01

    This paper presents a novel heuristic for constrained optimization of random computer simulation models, in which one of the simulation outputs is selected as the objective to be minimized while the other outputs need to satisfy prespeci¯ed target values. Besides the simulation outputs, the

  12. Authoring Systems for Laboratory Experiment Simulators.

    Science.gov (United States)

    Shacham, Mordechai; Cutlip, Michael B.

    1988-01-01

    Discussion of laboratory experiment simulation in science and engineering education focuses on the need for authoring systems that can be used to create simulations. An editor for a simulator model containing variables and mathematical equations is presented, and screen displays and data analysis are discussed. (LRW)

  13. Computer Simulation of the Neuronal Action Potential.

    Science.gov (United States)

    Solomon, Paul R.; And Others

    1988-01-01

    A series of computer simulations of the neuronal resting and action potentials are described. Discusses the use of simulations to overcome the difficulties of traditional instruction, such as blackboard illustration, which can only illustrate these events at one point in time. Describes systems requirements necessary to run the simulations.…

  14. Simulating the Risk of Bird Strikes

    NARCIS (Netherlands)

    Metz, I.C.; Ellerbroek, J.; Muhlhausen, Thorsten; Kügler, D.; Hoekstra, J.M.

    2017-01-01

    This paper presents a fast-time simulation environment for assessing the risk of bird strikes in aviation. An existing air traffic simulator was enhanced in order to simulate air and bird traffic simultaneously and to recognize collisions between birds and aircraft. Furthermore, a method was

  15. Internet Chat in Simulations: Taking BULLYING Online

    Science.gov (United States)

    Hull, Emily Blackshear

    2008-01-01

    This article discusses the pedagogical implications of using Internet chat in simulations for second-language learners. The author reviews several published simulations and explains how to use Internet chat effectively in the classroom. The author also relays her experience with using Internet chat with the BULLYING simulation.

  16. Patients with Chronic Conditions: Simulate to Educate?

    Science.gov (United States)

    Lefèvre, Thomas; Gagnayre, Rémi; Gignon, Maxime

    2017-01-01

    Simulation in healthcare in an way to train professionals but it is not yet use commonly to train patient or their caregivers. Recently, it has been suggested to extend simulations to patients with chronic conditions. Simulations could help patients and caregivers to acquire psychosocial and self-management skills. This approach proved to be…

  17. FATRAS - the ATLAS Fast Track Simulation project

    NARCIS (Netherlands)

    Mechnich, J.

    2011-01-01

    The Monte Carlo simulation of the detector response is an integral component of any analysis performed with data from the LHC experiments. As these simulated data sets must be both large and precise, their production is a CPU-intensive task. ATLAS has developed full and fast detector simulation

  18. Field: A Program for Simulating Ultrasound Systems

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt

    1997-01-01

    A program for the simulation of ultrasound systems is presented.It is based on the Tupholme-Stepanishen method, and is fastbecause of the use of a far-field approximation. Any kind oftransducer geometry and excitation can be simulated, and bothpulse-echo and continuous wave fields can be calculated...... it possible to simulate all types of ultrasound imaging systems....

  19. Simulation of the Physics of Flight

    Science.gov (United States)

    Lane, W. Brian

    2013-01-01

    Computer simulations continue to prove to be a valuable tool in physics education. Based on the needs of an Aviation Physics course, we developed the PHYSics of FLIght Simulator (PhysFliS), which numerically solves Newton's second law for an airplane in flight based on standard aerodynamics relationships. The simulation can be used to pique…

  20. Computer Simulation of a Hardwood Processing Plant

    Science.gov (United States)

    D. Earl Kline; Philip A. Araman

    1990-01-01

    The overall purpose of this paper is to introduce computer simulation as a decision support tool that can be used to provide managers with timely information. A simulation/animation modeling procedure is demonstrated for wood products manufacuring systems. Simulation modeling techniques are used to assist in identifying and solving problems. Animation is used for...