WorldWideScience

Sample records for testing safe packing

  1. Potential use of battery packs from NCAP tested vehicles.

    Energy Technology Data Exchange (ETDEWEB)

    Lamb, Joshua; Orendorff, Christopher J.

    2013-10-01

    Several large electric vehicle batteries available to the National Highway Traffic Safety Administration are candidates for use in future safety testing programs. The batteries, from vehicles subjected to NCAP crashworthiness testing, are considered potentially damaged due to the nature of testing their associated vehicles have been subjected to. Criteria for safe shipping to Sandia is discussed, as well as condition the batteries must be in to perform testing work. Also discussed are potential tests that could be performed under a variety of conditions. The ultimate value of potential testing performed on these cells will rest on the level of access available to the battery pack, i.e. external access only, access to the on board monitoring system/CAN port or internal electrical access to the battery. Greater access to the battery than external visual and temperature monitoring would likely require input from the battery manufacturer.

  2. SAFE Testing Nuclear Rockets Economically

    Science.gov (United States)

    Howe, Steven D.; Travis, Bryan; Zerkle, David K.

    2003-01-01

    Several studies over the past few decades have recognized the need for advanced propulsion to explore the solar system. As early as the 1960s, Werner Von Braun and others recognized the need for a nuclear rocket for sending humans to Mars. The great distances, the intense radiation levels, and the physiological response to zero-gravity all supported the concept of using a nuclear rocket to decrease mission time. These same needs have been recognized in later studies, especially in the Space Exploration Initiative in 1989. One of the key questions that has arisen in later studies, however, is the ability to test a nuclear rocket engine in the current societal environment. Unlike the Rover/NERVA programs in the 1960s, the rocket exhaust can no longer be vented to the open atmosphere. As a consequence, previous studies have examined the feasibility of building a large-scale version of the Nuclear Furnace Scrubber that was demonstrated in 1971. We have investigated an alternative that would deposit the rocket exhaust along with any entrained fission products directly into the ground. The Subsurface Active Filtering of Exhaust, or SAFE, concept would allow variable sized engines to be tested for long times at a modest expense. A system overview, results of preliminary calculations, and cost estimates of proof of concept demonstrations are presented. The results indicate that a nuclear rocket could be tested at the Nevada Test Site for under $20 M.

  3. Introduction of Pack Test for Participative Environmental Monitoring and Environmental Education for Sustainability in Malaysia

    Directory of Open Access Journals (Sweden)

    Muhammad Faiz Bin Abd Rahman

    2011-06-01

    Full Text Available Pack Test which provided by Kyoritsu Chemical-Check Lab. Corporation has been assumed as a professional easy-to-use onsite water quality checker. The aim of this study is to examine the possibility of application of Pack Test in Malaysia, and to assess the required matters during introduction processes. Two workshops were sampled to prove the potential function of Pack Test in environmental education and participative environmental monitoring. Two hours lecture of Universiti Teknologi Malaysia (UTM was facilitated as a workshop by author on September 23, 2010, and then the author has assisted a workshop in Putrajaya on October 9, 2010. Questionnaire forms were applied to test as if peoples feeling are positive or not towards Pack Test as preliminary research. Water quality parameters were simultaneously measured by Pack Test, such as, COD, NO3-, CI-, and NH4+ in UTM, pH and NO3- were measured in Putrajaya workshop, respectively. Participant�s feeling in the both workshops showed strong positive potential for Pack Test. Results of water qualities from UTM workshop had big variation in COD and NO3-. Considering the reason, the UTM workshop was conducted without proper support for both facilitator and participant. Participants were able to classify the water quality level in a short time. As for the Putrajaya workshop, with deep support and well skilled instruction by facilitator team, the data showed small variation i.e. good and consistent water quality result. It was obvious that Pack Test was always applicable to assess water environment and it was well functioned as user friendly easy-to-use water quality checker. Thereby the role of Pack Test was segregated from conventional standard methods. The participant�s feeling to Pack Test was strong positive for implementation and to improve public environmental awareness. Simultaneously, they were feeling that peoples can participate more effectively in water environment issues by Pack Test. It

  4. 6-flow reactor : Catalyst testing in a multiphase-parallel packed-microreactor system

    NARCIS (Netherlands)

    Herk, D. van

    2009-01-01

    This thesis deals with the design and operation of a multiple-parallel powder-packed reactor with continuous gas and liquid flows for kinetic tests. The reactor design is discussed in detail. Subsequently, axial dispersion in a multiphase packed microreactor is treated. Also, it is described how to

  5. Physical and chemical test results of electrostatic safe flooring materials

    Science.gov (United States)

    Gompf, R. H.

    1988-01-01

    This test program was initiated because a need existed at the Kennedy Space Center (KSC) to have this information readily available to the engineer who must make the choice of which electrostatic safe floor to use in a specific application. The information, however, should be of value throughout both the government and private industry in the selection of a floor covering material. Included are the test results of 18 floor covering materials which by test evaluation at KSC are considered electrostatically safe. Tests were done and/or the data compiled in the following areas: electrostatics, flammability, hypergolic compatibility, outgassing, floor type, material thickness, and available colors. Each section contains the test method used to gather the data and the test results.

  6. Ice Pack Heat Sink Subsystem - Phase I. [astronaut liquid cooling garment design and testing

    Science.gov (United States)

    Roebelen, G. J., Jr.

    1973-01-01

    This paper describes the design and test at one-g of a functional laboratory model (non-flight) Ice Pack Heat Sink Subsystem to be used eventually for astronaut cooling during manned space missions. In normal use, excess heat in the liquid cooling garment (LCG) coolant is transferred to a reusable/regenerable ice pack heat sink. For emergency operation, or for extension of extravehicular activity mission time after all the ice has melted, water from the ice pack is boiled to vacuum, thereby continuing to remove heat from the LCG coolant. This subsystem incorporates a quick connect/disconnect thermal interface between the ice pack heat sink and the subsystem heat exchanger.

  7. Fluoride retardation from quartz sand-packed column tests

    Directory of Open Access Journals (Sweden)

    Eduardo Usunoff

    2009-06-01

    Full Text Available Inasmuch as both low and high concentrations of F- in groundwater have different detrimental effects on human health (increased dental caries, and mottled enamel or even severe structural bone deformations, respectively, many efforts have focused on the movement of such anion in aqueous systems. It is so because water drinking is the main intake of F- by humans. This paper presents the results of seven dynamic experiments in which solutions of varying [F-], pH, and flow velocities circulated through columns packed with clean quartz sand. The breakthrough data were analyzed by means of a computer code adapted to the estimation of equilibrium and non-equilibrium solute transport parameters from miscible displacement experiments in a steady-state, uniform flow field using a pulse-type or continuous source. It was found that larger retardation factors (R are associated with low pH, low [F-] in the feed solutions, and larger flow velocities. Such results appear to be related to the form of the F species, the rather weak bond between the adsorbate and the quartz sand, and stronger anion repulsion at low pore velocities. The estimated values for R vary between 1,22 and 1,50, whereas the distribution coefficients were in the range of 0,1 to 0,05 L kg-1. It should be said that the breakthrough curves display hysteresis, leading to a desorption behavior that proceeds faster than the adsorption process.Puesto que tanto valores bajos como altos de F- en las aguas subterráneas tienen efectos adversos en la salud de los humanos (mayor cantidad de caries, y manchas del esmalte dental e incluso deformaciones óseas, respectivamente, han sido muchos los esfuerzos destinados a dilucidar el movimiento de especies fluoradas en ambientes acuosos. Ello es así porque el consumo de agua por parte de seres humanos representa la mayor fuente de ingreso de F-. Este trabajo presenta los resultados de siete experimentos dinámicos en los que soluciones de diferentes [F

  8. Embracing Safe Ground Test Facility Operations and Maintenance

    Science.gov (United States)

    Dunn, Steven C.; Green, Donald R.

    2010-01-01

    Conducting integrated operations and maintenance in wind tunnel ground test facilities requires a balance of meeting due dates, efficient operation, responsiveness to the test customer, data quality, effective maintenance (relating to readiness and reliability), and personnel and facility safety. Safety is non-negotiable, so the balance must be an "and" with other requirements and needs. Pressure to deliver services faster at increasing levels of quality in under-maintained facilities is typical. A challenge for management is to balance the "need for speed" with safety and quality. It s especially important to communicate this balance across the organization - workers, with a desire to perform, can be tempted to cut corners on defined processes to increase speed. Having a lean staff can extend the time required for pre-test preparations, so providing a safe work environment for facility personnel and providing good stewardship for expensive National capabilities can be put at risk by one well-intending person using at-risk behavior. This paper documents a specific, though typical, operational environment and cites management and worker safety initiatives and tools used to provide a safe work environment. Results are presented and clearly show that the work environment is a relatively safe one, though still not good enough to keep from preventing injury. So, the journey to a zero injury work environment - both in measured reality and in the minds of each employee - continues. The intent of this paper is to provide a benchmark for others with operational environments and stimulate additional sharing and discussion on having and keeping a safe work environment.

  9. Power Packing

    Centers for Disease Control (CDC) Podcasts

    2011-08-16

    In this podcast for kids, the Kidtastics talk about how to pack a lunch safely, to help keep you from getting sick.  Created: 8/16/2011 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 8/16/2011.

  10. Explosion Testing of a Polycarbonate Safe Haven Wall

    Science.gov (United States)

    Perry, Kyle A.; Meyr, Rex A.

    2016-12-01

    The MINER Act of 2006 was enacted by MSHA following the major mining accidents and required every underground coal mine to install refuge areas to help prevent future fatalities of trapped miners in the event of a disaster where the miners cannot escape. A polycarbonate safe haven wall for use in underground coal mines as component of a complete system was designed and modeled using finite element modeling in ANSYS Explicit Dynamics to withstand the MSHA required 15 psi (103.4 kPa) blast loading spanning 200 milliseconds. The successful design was constructed at a uniform height in both half-width scale and quarter-width scale in the University of Kentucky Explosives Research Team's (UKERT) explosives driven shock tube for verification of the models. The constructed polycarbonate walls were tested multiple times to determine the walls resistance to pressures generated by an explosion. The results for each test were analyzed and averaged to create one pressure versus time waveform which was then imported into ANSYS Explicit Dynamics and modeled to compare results to that which was measured during testing for model validation. This paper summarizes the results.

  11. Wind pressure testing of tornado safe room components made from wood

    Science.gov (United States)

    Robert Falk; Deepak Shrestha

    2016-01-01

    To evaluate the ability of a wood tornado safe room to resist wind pressures produced by a tornado, two safe room com-ponents were tested for wind pressure strength. A tornado safe room ceiling panel and door were static-pressure-tested according to ASTM E 330 using a vacuum test system. Re-sults indicate that the panels had load capacities from 2.4 to 3.5 times that...

  12. Safe and secure South Africa. Vehicle landmine protection validation testing

    CSIR Research Space (South Africa)

    Reinecke, JD

    2008-11-01

    Full Text Available The objective of this paper is to provide an overview of vehicle landmine protection validation testing in South Africa. A short history of validation test standards is given, followed by a summary of current open test standards in general use...

  13. Teste do gelo no diagnóstico de miastenia gravis Ice pack test in the diagnosis of myasthenia gravis

    Directory of Open Access Journals (Sweden)

    Nilson Lopes da Fonseca Junior

    2010-04-01

    Full Text Available OBJETIVO: Demonstrar a sensibilidade e especificidade do teste do gelo no diagnóstico diferencial de ptose palpebral por miastenia gravis. MÉTODOS: Estudo prospectivo tipo ensaio clínico com grupo controle. Foi realizado o teste do gelo em pacientes portadores de ptose palpebral. Os pacientes foram divididos em 2 grupos, sendo o grupo I constituído por pacientes com miastenia gravis e o grupo II (controle formado por pacientes portadores de ptose congênita, miogênica não-miastênica ou aponeurótica. RESULTADOS: Todos os pacientes do grupo I tiveram aumento da fenda palpebral de, no mínimo, 3 mm após a aplicação do gelo. Nenhum paciente do grupo II apresentou incremento da fenda palpebral após o teste. CONCLUSÃO: O teste do gelo mostrou-se específico para detecção de ptose palpebral de causa miastênica.PURPOSE: To demonstrate the sensitivity and the specificity of the ice test in the differential diagnosis of ptosis in myasthenia gravis. METHODS: Prospective trial with a control group. The patients were instructed to hold a frozen ice pack on the closed ptotic eyelid. They were divided into 2 groups, with group I consisting of patients with myasthenia gravis and group II (control consisting of patients with congenital, non-myasthenic myogenic or aponeurotic ptosis. RESULTS: All patients in group I had increased palpebral fissure for at least 3 mm after the application of ice pack. No patient in group II showed increased palpebral fissure after the ice test. CONCLUSION: Ice test proved to be specific for the detection of myasthenic ptosis.

  14. Making Big Data, Safe Data: A Test Optimization Approach

    Science.gov (United States)

    2016-06-15

    only solution to maximize the knowledge of a system under the constraints of time, money, and testing capabilities, is to optimize decision making ...execute each test. Test Planning Step 3: Determine θ�d0, the initial estimate of the expected reward for making decision d, where each decision involves...complex or have multiple criteria to be considered passing than a KG policy is used create a binary result. In this case the KGS becomes a variable

  15. Simultaneous intradermal testing with hymenoptera venoms is safe and more efficient than sequential testing.

    Science.gov (United States)

    Strohmeier, B; Aberer, W; Bokanovic, D; Komericki, P; Sturm, G J

    2013-04-01

    According to current guidelines, skin testing for hymenoptera venom allergy should be performed in a stepwise manner, maintaining 15- to 20-min intervals between the injections of venom. Given the long-winded procedure of sequential skin testing, we retrospectively explored the safety of simultaneous intradermal testing. Four hundred and seventy-eight consecutive patients with a convincing history of an anaphylactic reaction after a hymenoptera sting were tested. All venom concentrations (0.02 ml of 0.001, 0.01, 0.1, and 1.0 μg/ml of honey bee and wasp venom) were administered simultaneously to the skin. Four hundred and seventy-two (98.7%) patients tolerated the simultaneous intradermal test without any side-effects. Only three subjects (0.6%) had a presumed allergic reaction during the test; another three reactions were considered vasovagal. Our skin test protocol with four simultaneously injected concentrations of two hymenoptera venoms is safe and permits the investigator to draw rapid conclusions about the individual's sensitization pattern. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

  16. Subscale Validation of the Subsurface Active Filtration of Exhaust (SAFE) Approach to the NTP Ground Testing

    Science.gov (United States)

    Marshall, William M.; Borowski, Stanley K.; Bulman, Mel; Joyner, Russell; Martin, Charles R.

    2015-01-01

    Nuclear thermal propulsion (NTP) has been recognized as an enabling technology for missions to Mars and beyond. However, one of the key challenges of developing a nuclear thermal rocket is conducting verification and development tests on the ground. A number of ground test options are presented, with the Sub-surface Active Filtration of Exhaust (SAFE) method identified as a preferred path forward for the NTP program. The SAFE concept utilizes the natural soil characteristics present at the Nevada National Security Site to provide a natural filter for nuclear rocket exhaust during ground testing. A validation method of the SAFE concept is presented, utilizing a non-nuclear sub-scale hydrogen/oxygen rocket seeded with detectible radioisotopes. Additionally, some alternative ground test concepts, based upon the SAFE concept, are presented. Finally, an overview of the ongoing discussions of developing a ground test campaign are presented.

  17. Testing commercial biopreservative against spoilage microorganisms in MAP packed Ricotta fresca cheese.

    Science.gov (United States)

    Spanu, C; Scarano, C; Piras, F; Spanu, V; Pala, C; Casti, D; Lamon, S; Cossu, F; Ibba, M; Nieddu, G; De Santis, E P L

    2017-09-01

    Ricotta fresca cheese is susceptible to secondary contamination and is able to support the growth of pathogens or spoilage psychotrophic bacteria during storage. The aim of the present study was to evaluate which among three commercial biopreservatives was suitable to be used to control the growth of spoilage microorganisms in sheep's milk MAP ricotta fresca cheese. 144 Ricotta fresca cheese samples were inoculated either with the bioprotective culture Lyofast FPR 2 (including Enterococcus faecium, Lactobacillus plantarum e Lactobacillus rhamnosus) or Lyofast CNBAL (Carnobacterium spp) or the fermentate MicroGARD 430. Not inoculated control and experimental ricotta were MAP packed (30% CO2 and 70% N2) and stored at 4 °C. Triplicate samples were analyzed after 5 h and 7, 14 and 21 days after inoculation for total bacterial count, mesophilic lactic acid bacteria, Enterobacteriaceae, Pseudomonas spp, Listeria monocytogenes, moulds and yeasts. Among the tested biopreservatives only Carnobacterium spp was able to control Pseudomonas spp and Enterobacteriaceae. The maximum reduction in the concentration of Pseudomonas spp and Enterobacteriaceae was respectively 1.93 and 2.66 log10 cfu/g, observed 14 days after production. Therefore, Carnobacterium spp was selected as the culture of choice to conduct a challenge study against Pseudomonas spp. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Development of a tornado safe room door from wood Products: door design and impact testing

    Science.gov (United States)

    Robert H. Falk; James J. Bridwell

    2016-01-01

    In this study, a tornado safe room door built from wood products and steel sheeting was developed and impact-tested according to tornado safe room standards. Results indicate that an door constructed from as few as two sheets of 23/32-in. (18.26-mm) construction-grade plywood and overlaid with 18-gauge (0.05-in.- (1.27- mm-) thick) steel can pass the required impact...

  19. Determining safe antibiotics for drug hypersensitive patients with the alternative method of double-triple test.

    Science.gov (United States)

    Karakaya, G; Isik, S R; Kalyoncu, A F

    2008-01-01

    Allergic reactions to antibiotics are common in daily clinical allergy practice. Oral drug provocation tests (ODPT) are used to determine safe alternative antibiotics in addition to diagnostic purposes. In one of our previous studies, we have shown that triple test was a safe, time-saving and cost-effective method for determining safe alternatives for patients with non-steroidal anti-inflammatory drug (NSAID) hypersensitivity. Our aim was to investigate the safety of one day two or three antibiotic ODPT performed to find safe alternative antibiotics in antibiotic/NSAID hypersensitive patients, as a cost effective and time saving alternative to conventional one day one antibiotic ODPT. Fifty-three patients were enrolled into this survey between 1 September 2005 and 31 December 2006. Double and triple tests are defined as performing ODPT with two and three antibiotics consecutively on the same day. Mean age of the patients was 41.3 +/- 11.7 years and 71.7 % were females. Beta-lactams (41.5 %) were the antibiotics most commonly causing reactions and the most common reaction was urticaria (68.8 %). Double test was performed in 26 (ciprofloxacin + clarithromycin, ciprofloxacin + tetracyline, clarithromycin + tetracycline, ciprofloxacin + ampicillin and ciprofloxacin + roxithromycin) and triple test in 27 patients (ciprofloxacin + tetracycline + clarithromycin, ciprofloxacin + tetracycline + ampicillin, clarithromycin + tetracycline + clindamycin and clarithromycin + ciprofloxacin + ampicillin). Only four patients had positive reactions during triple and double tests. There were no serious adverse reactions. Sixty-five days have been spent with triple-double tests where it would be 136 days with the conventional method. The triple-double ODPT performed with antibiotics in antibiotic/NSAID hypersensitive patients with the purpose of determining a safe alternative antibiotic could be a safe, cost-effective and time-saving alternative to conventional one day one antibiotic

  20. Front-of-pack nutrition labelling: testing effectiveness of different nutrition labelling formats front-of-pack in four European countries.

    Science.gov (United States)

    Feunekes, Gerda I J; Gortemaker, Ilse A; Willems, Astrid A; Lion, René; van den Kommer, Marcelle

    2008-01-01

    In two studies, the impact of eight front-of-pack nutrition labelling formats that differed in complexity was investigated across four European countries. In total 1630 men and women (18-55 yrs) were recruited from Internet panels in the United Kingdom, Germany, Italy and the Netherlands for study 1 and 776 in Italy and the United Kingdom for study 2. Participants evaluated several products (healthier and less healthy variants of the same product category) with a front-of-pack nutrition labelling format. The first study evaluated different labelling formats on consumer friendliness (comprehension, liking and credibility) and the second study measured the effect of the different labelling formats on decision-making (usage intention and process time). The results indicated minor differences in consumer friendliness and usage intention between simpler (such as Healthier Choice Tick, Smileys and Stars) and more complex front-of-pack nutrition labelling formats (such as Multiple Traffic Light, Wheel of Health and GDA scores). Endorsement by national and international health organisations strongly increased the labelling formats' credibility. Participants needed significantly less time to evaluate simpler front-of-pack labelling compared to the more complex labelling format. Thus simpler front-of-pack labelling formats seem more appropriate in a shopping environment where quick decisions are made.

  1. Consumer testing of the acceptability and effectiveness of front-of-pack food labelling systems for the Australian grocery market.

    Science.gov (United States)

    Kelly, Bridget; Hughes, Clare; Chapman, Kathy; Louie, Jimmy Chun-Yu; Dixon, Helen; Crawford, Jennifer; King, Lesley; Daube, Mike; Slevin, Terry

    2009-06-01

    The placement of nutrition information on the front of food packages has been proposed as a method of providing simplified and visible nutrition information. This study aimed to determine the most acceptable and effective front-of-pack food labelling system for Australian consumers. Consumers' preferences and ability to compare the healthiness of mock food products were assessed for different front-of-pack labelling systems. Four systems were tested, including two variations of the Percentage Daily Intake system (Monochrome %DI and Colour-Coded %DI), which displays the proportion of daily nutrient contribution that a serve of food provides; and two variations of the Traffic Light (TL) system (Traffic Light and Traffic Light + Overall Rating), which uses colour-coding to indicate nutrient levels. Intercept surveys with 790 consumers were conducted, where each participant was exposed to a single labelling system for performance testing. Participants indicated strong support for the inclusion of nutrient information on total fat, saturated fat, sugar and sodium on the front of packages, and a consistent labelling format across all products. Using the TL system, participants were five times more likely to identify healthier foods compared with the Monochrome %DI system [odds ratio (OR) = 5.18; p front-of-pack food labelling. The TL system was the most effective in assisting consumers to identify healthier foods. Mandatory TL labelling regulations are recommended to assist consumers in making healthy food choices.

  2. Determining safe alternatives for multidrug hypersensitive patients with the alternative triple antibiotic-analgesic test.

    Science.gov (United States)

    Ozturk, A B; Celebioglu, E; Karakaya, G; Kalyoncu, A F

    2013-01-01

    Drug provocation tests (DPTs) need technical equipment, staff and time. There are very few allergy centres performing DPTs in Turkey. Therefore many patients are referred to these centres. One day triple-double antibiotic or non-steroidal anti-inflammatory drug (NSAID) oral DPT for determining safe alternatives is safe, cost-effective and time saving compared to conventional one day one drug oral DPT. Our aim was to investigate the safety of antibiotic-NSAID oral DPT performed on the same day to find safe alternatives in multidrug hypersensitive patients. Forty-two patients who had been diagnosed as having both antibiotic and NSAID hypersensitivity were enrolled to the study between 15 November and 15 July 2010. The reactions were urticaria and/or angio-oedema not including laryngeal oedema for all patients. Two antibiotics-one NSAID or two NSAIDs-one antibiotic triple test have been performed on the same day to study patients (n=22), while the control group (n=20) had taken drugs on three separate days. Only two patients had positive reactions during triple test and two patients had adverse reactions; one had gastric pain, one had nausea. Three patients in the control group had positive reactions. There were no significant differences between the two groups in frequency of adverse and allergic drug reactions (p>0.05). Sixty days were spent for the tests of the control group with only 28 days for the study population. Triple test performed with antibiotic and NSAID on the same day for determining safe alternatives for multidrug hypersensitive patients reporting non-life-threatening allergic reactions seems to be safe and time-saving. Copyright © 2011 SEICAP. Published by Elsevier Espana. All rights reserved.

  3. The Planar Sandwich and Other 1D Planar Heat Flow Test Problems in ExactPack

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, Jr., Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-24

    This report documents the implementation of several related 1D heat flow problems in the verification package ExactPack [1]. In particular, the planar sandwich class defined in Ref. [2], as well as the classes PlanarSandwichHot, PlanarSandwichHalf, and other generalizations of the planar sandwich problem, are defined and documented here. A rather general treatment of 1D heat flow is presented, whose main results have been implemented in the class Rod1D. All planar sandwich classes are derived from the parent class Rod1D.

  4. Reliability of a Test Battery Designed for Quickly and Safely Assessing Diverse Indices of Neuromuscular Function

    Science.gov (United States)

    Spiering, Barry A.; Lee, Stuart M. C.; Mulavara, Ajitkumar P.; Bentley, Jason, R.; Buxton, Roxanne E.; Lawrence, Emily L.; Sinka, Joseph; Guilliams, Mark E.; Ploutz-Snyder, Lori L.; Bloomberg, Jacob J.

    2010-01-01

    Spaceflight affects nearly every physiological system. Spaceflight-induced alterations in physiological function translate to decrements in functional performance. Purpose: To develop a test battery for quickly and safely assessing diverse indices of neuromuscular performance. I. Quickly: Battery of tests can be completed in approx.30-40 min. II. Safely: a) No eccentric muscle actions or impact forces. b) Tests present little challenge to postural stability. III. Diverse indices: a) Strength: Excellent reliability (ICC = 0.99) b) Central activation: Very good reliability (ICC = 0.87) c) Power: Excellent reliability (ICC = 0.99) d) Endurance: Total work has excellent reliability (ICC = 0.99) e) Force steadiness: Poor reliability (ICC = 0.20 - 0.60) National

  5. Is your lunch salad safe to eat? Occurrence of bacterial pathogens and potential for pathogen growth in pre-packed ready-to-eat mixed-ingredient salads.

    Science.gov (United States)

    Söderqvist, Karin

    2017-01-01

    As part of a trend toward healthy convenience foods, ready-to-eat (RTE) mixed-ingredient salads have become popular products among consumers. A mixed-ingredient salad contains combinations of raw (e.g. leafy vegetables and tomatoes) and processed (e.g. chicken, salmon, ham, pasta and couscous) ingredients. Contamination of leafy vegetables can occur during any step in the production chain and, since there is no step that kills pathogens, a completely safe final product can never be guaranteed. Meat ingredients, for example poultry meat and ham, are generally heat-treated before preparation, but may be contaminated after this treatment, e.g. when diced or sliced. When several ingredients are mixed together, cross-contamination may occur. Preparation of mixed-ingredient salads requires human handling, which presents an additional risk of bacterial contamination. With high-protein ingredients, e.g. cooked meat, the mixed-ingredient salad represents an excellent substrate for bacterial growth. This article reviews current knowledge regarding human bacterial pathogen prevalence in mixed-ingredient salads and the potential for pathogen growth in this product during storage.

  6. Growing pains : how drug testing keeps workers and assets safe in a booming oil patch

    Energy Technology Data Exchange (ETDEWEB)

    Paulgaard, T.S.

    2006-06-15

    Drug abuse has become a subject of concern to the oil and gas industry, where mistakes in the operation of large machines can result in injury, death and the loss of millions of dollars. Pre-employment urine tests are becoming standard procedure in the oil field. Many supervisors refuse to let employees start work without a clear test. Urine samples are tested for the presence of cannabis, cocaine, opiates, amphetamines and phencyclidine. When a worker is injured or killed on the job, or after an uncommon error that causes significant damage, all parties involved are tested as soon as possible and a receipt of the results are expedited. The Alberta Human Rights and Citizenship Commission is now addressing the issue of drug testing, and has ascertained that drug and alcohol testing are only allowable in certain circumstances, and that it is discriminatory to test potential or existing employees for drug and alcohol use if the testing is not reasonable or justifiable. They have also suggested that there is a duty to accommodate persons with disabilities in the workplace. Drug and alcohol dependency fall within the meaning of disabled. Under the Construction Owner's Association of Alberta's Canadian Model for a Safe Workplace, testing must work in concert with treatment. Current employees are directed to seek help via an employee assistant plan. Workers and supervisors report that drug use is rampant in work camps. Industry-wide, fail rates for those who take part in drug testing are quoted by experts as ranging from between 2 to 14 per cent. 2 figs.

  7. Packing Smart

    Centers for Disease Control (CDC) Podcasts

    2011-08-22

    In this podcast for kids, the Kidtastics talk about packing a lunch that's not boring and is full of the power and energy kids need to make it through the day.  Created: 8/22/2011 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 8/22/2011.

  8. Test and evaluation plan for Project W-314 tank farm restoration and safe operations

    Energy Technology Data Exchange (ETDEWEB)

    Hays, W.H.

    1998-06-25

    The ``Tank Farm Restoration and Safe Operations`` (TFRSO), Project W-314 will restore and/or upgrade existing Hanford Tank Farm facilities and systems to ensure that the Tank Farm infrastructure will be able to support near term TWRS Privatization`s waste feed delivery and disposal system and continue safe management of tank waste. The capital improvements provided by this project will increase the margin of safety for Tank Farms operations, and will aid in aligning affected Tank Farm systems with compliance requirements from applicable state, Federal, and local regulations. Secondary benefits will be realized subsequent to project completion in the form of reduced equipment down-time, reduced health and safety risks to workers, reduced operating and maintenance costs, and minimization of radioactive and/or hazardous material releases to the environment. The original regulatory (e.g., Executive Orders, WACS, CFRS, permit requirements, required engineering standards, etc.) and institutional (e.g., DOE Orders, Hanford procedures, etc.) requirements for Project W-314 were extracted from the TWRS S/RIDs during the development of the Functions and Requirements (F and Rs). The entire family of requirements were then validated for TWRS and Project W-314. This information was contained in the RDD-100 database and used to establish the original CDR. The Project Hanford Management Contract (PHMC) team recognizes that safety, quality, and cost effectiveness in the Test and Evaluation (T and E) program is achieved through a planned systematic approach to T and E activities. It is to this end that the Test and Evaluation Plan (TEP) is created. The TEP for the TFRSO Project, was developed based on the guidance in HNF-IP-0842, and the Good Practice Guide GPG-FM-005, ``Test and Evaluation,`` which is derived from DOE Order 430.1, ``Life Cycle Asset Management.`` It describes the Test and Evaluation program for the TFRSO project starting with the definitive design phase and ending

  9. Tools to Ensure Safe Medicines: New Monograph Tests in USP-NF

    Directory of Open Access Journals (Sweden)

    Catherine Sheehan

    2010-06-01

    Full Text Available This paper describes USP-NF compendial updates to six ‘high-priority” excipient monographs: Glycerin, Propylene Glycol, Sorbitol Solution, Sorbitol Sorbitan Solution, Noncrystallizing Sorbitol Solution and Maltitol Solution. The USP-NF revisions arose from the Food and Drug Administration’s (FDA’s requests to include, as part of each monograph’s Identification test, a limit test to detect the presence of Diethylene Glycol (DEG, a toxic adulterant. These revisions align with the 2007 FDA Guidance for Industry: Testing of Glycerin for Diethylene Glycol (1, that drug product manufacturers perform a specific identity test for DEG on all containers of all lots of glycerin before glycerin is used in the manufacture and preparation of drug products. This paper describes several risk factors due to a complex global excipient supply chain, nonspecific specifications, inadequate supply chain qualification, and poor understanding of regulations. Strengthening and conformance to compendial specifications is one of the tools necessary to mitigate risk and help prevent the next DEG adulteration that is part of USP’s efforts to ensure safe medicines.

  10. Performance testing of aged hydrogen getters against criteria for interim safe storage of plutonium bearing materials.

    Energy Technology Data Exchange (ETDEWEB)

    Shepodd, Timothy J.; Nissen, April; Buffleben, George M.

    2006-01-01

    Hydrogen getters were tested for use in storage of plutonium-bearing materials in accordance with DOE's Criteria for Interim Safe Storage of Plutonium Bearing Materials. The hydrogen getter HITOP was aged for 3 months at 70 C and tested under both recombination and hydrogenation conditions at 20 and 70 C; partially saturated and irradiated aged getter samples were also tested. The recombination reaction was found to be very fast and well above the required rate of 45 std. cc H2h. The gettering reaction, which is planned as the backup reaction in this deployment, is slower and may not meet the requirements alone. Pressure drop measurements and {sup 1}H NMR analyses support these conclusions. Although the experimental conditions do not exactly replicate the deployment conditions, the results of our conservative experiments are clear: the aged getter shows sufficient reactivity to maintain hydrogen concentrations below the flammability limit, between the minimum and maximum deployment temperatures, for three months. The flammability risk is further reduced by the removal of oxygen through the recombination reaction. Neither radiation exposure nor thermal aging sufficiently degrades the getter to be a concern. Future testing to evaluate performance for longer aging periods is in progress.

  11. Design and Control of a Multi-Functional Energy Recovery Power Accumulator Battery Pack Testing System for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Bo Long

    2014-03-01

    Full Text Available In this paper, aiming at the energy loss and harmonic problems in the conventional power accumulator battery pack testing system (PABPTS, an improved multi-functional energy recovery PABPTS (ERPABPTS for electric vehicles (EVs was proposed. The improved system has the functions of harmonic detection, suppression, reactive compensation and energy recovery. The ERPABPTS, which contains a bi-directional buck-boost direct current (DC-DC converter and a bi-directional alternating current (AC-DC converter with an inductor-capacitor-inductor (LCL type filter interfacing to the AC-grid, is proposed. System configuration and operation principle of the combined system are discussed first, then, the reactive compensation and harmonic suppression controller under balanced grid-voltage condition are presented. Design of a fourth order band-pass Butterworth filter for current harmonic detection is put forward, and the reactive compensator design procedure considering the non-linear load is also illustrated. The proposed scheme is implemented in a 175-kW prototype in the laboratory. Simulation and experimental results show that the combined configuration can effectively realize energy recovery for high accuracy current test requirement, meanwhile, can effectively achieve reactive compensation and current harmonic suppression.

  12. Discrete element modelling of pebble packing in pebble bed reactors

    Energy Technology Data Exchange (ETDEWEB)

    Suikkanen, Heikki, E-mail: heikki.suikkanen@lut.fi; Ritvanen, Jouni, E-mail: jouni.ritvanen@lut.fi; Jalali, Payman, E-mail: payman.jalali@lut.fi; Kyrki-Rajamäki, Riitta, E-mail: riitta.kyrki-rajamaki@lut.fi

    2014-07-01

    Highlights: • A discrete element method code is developed for pebble bed reactor analyses. • Methods are established to extract packing information at various spatial scales. • Packing simulations inside annular core geometry are done varying input parameters. • The restitution coefficient has the strongest effect on the resulting packing density. • Detailed analyses reveal local densification especially near the walls. - Abstract: It is important to understand the packing characteristics and behaviour of the randomly packed pebble bed to further analyse the reactor physical and thermal-hydraulic behaviour and to design a safe and economically feasible pebble bed reactor. The objective of this work was to establish methods to model and analyse the pebble packing in detail to provide useful tools and data for further analyses. Discrete element method (DEM) is a well acknowledged method for analysing granular materials, such as the fuel pebbles in a pebble bed reactor. In this work, a DEM computer code was written specifically for pebble bed analyses. Analysis methods were established to extract data at various spatial scales from the pebble beds resulting from the DEM simulations. A comparison with available experimental data was performed to validate the DEM implementation. To test the code implementation in full-scale reactor calculations, DEM packing simulations were done in annular geometry with 450,000 pebbles. Effects of the initial packing configuration, friction and restitution coefficients and pebble size distribution to the resulting pebble bed were investigated. The packing simulations revealed that from the investigated parameters the restitution coefficient had the largest effect on the resulting average packing density while other parameters had smaller effects. Detailed local packing density analysis of pebble beds with different average densities revealed local variations especially strong in the regions near the walls. The implemented DEM

  13. Evaluation of S1 motor block to determine a safe, reliable test dose for epidural analgesia.

    Science.gov (United States)

    Daoud, Z; Collis, R E; Ateleanu, B; Mapleson, W W

    2002-09-01

    Accidental intrathecal injection of bupivacaine during epidural analgesia in labour remains a hazard, with the potential to cause total spinal anaesthesia and maternal collapse. Sacral block appears early after intrathecal injections compared with epidural ones, and we therefore used SI motor block to determine a safe and reliable test dose for epidural catheter misplacement. Mothers booked for elective Caesarean section were given various intrathecal doses of bupivacaine with fentanyl during routine combined spinal-epidural anaesthesia. Using sequential allocation we found that the ED50 for SI motor block 10 min after intrathecal injection was bupivacaine 7 mg with fentanyl 14 micrograms (95% CI, 6.2-7.8 mg). We then used intrathecal bupivacaine 13 mg to look for the ED95. We found the calculated ED97.5 to be bupivacaine 9.7 mg with fentanyl 19.4 micrograms (95% CI, 8.7-11.4). We conclude that testing for SI motor block 10 min after epidural injection of bupivacaine 10 mg is a reliable test to detect accidental intrathecal injection in the obstetric population.

  14. D-dimer testing for safe exclusion and risk stratification in patients with acute pulmonary embolism in primary care

    OpenAIRE

    Zhou Yin; Yiyi Chen; Qiong Xie; Zhexin Shao

    2015-01-01

    Background: Safe exclusion and risk stratification are currently recommended for the initial management of patients with acute pulmonary embolism (APE). The aim of this study was to assess the safe exclusion and risk stratification value of D-dimer (DD) for APE when tested at the beginning of admission. Materials and Methods: All consecutive Chinese APE patients and controls were recruited from January 2010 to December 2012. All measurements of serum indexes were made in duplicate and blinded...

  15. Heat Pipe Reactor Dynamic Response Tests: SAFE-100 Reactor Core Prototype

    Science.gov (United States)

    Bragg-Sitton, Shannon M.

    2005-01-01

    The SAFE-I00a test article at the NASA Marshall Space Flight Center was used to simulate a variety of potential reactor transients; the SAFEl00a is a resistively heated, stainless-steel heat-pipe (HP)-reactor core segment, coupled to a gas-flow heat exchanger (HX). For these transients the core power was controlled by a point kinetics model with reactivity feedback based on core average temperature; the neutron generation time and the temperature feedback coefficient are provided as model inputs. This type of non-nuclear test is expected to provide reasonable approximation of reactor transient behavior because reactivity feedback is very simple in a compact fast reactor (simple, negative, and relatively monotonic temperature feedback, caused mostly by thermal expansion) and calculations show there are no significant reactivity effects associated with fluid in the HP (the worth of the entire inventory of Na in the core is .concept, it was decided to use a temperature based feedback model (based on several thermocouples placed throughout the core).

  16. Residential Tornado Safe Rooms from Commodity Wood Products: Wall Development and Impact Testing

    Science.gov (United States)

    Robert H. Falk; James J. Bridwell; John C. Hermanson

    2015-01-01

    In the United States, tornadoes cause significant damage and result in many injuries and deaths. Although the development and use of tornado safe rooms and shelters have helped reduce the human toll associated with these events, the cost of these structures is often too high for many that could benefit from their use. The development of a residential tornado safe room...

  17. Computational fluid dynamics and experimental tests helping to understand the gravel pack displacement in petroleum wells; Fluidodinamica computacional (CFD) e testes experimentais ajudam a compreender o fenomeno do deslocamento do gravel pack em pocos de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Magalhaes, Joao Vicente Martins de; Leal, Rafael Amorim Ferreira; Martins, Andre Leibsohn; Calderon, Agostinho; Ferreira, Marcus Vinicius Duarte [Petrobras S.A., Rio de Janeiro, RJ (Brazil)], E-mails: ivmm@petrobras.com.br, rafaelleal@petrobras.com.br, aleibsohn@petrobras.com.br, agoscal@petrobras.com.br, mvdferreira@petrobras.com.br; Simoes, Bruno; Barbosa, Diego [Halliburton, Novo Cavaleiros, Macae, RJ (Brazil)], E-mails: bruno.simoes@halliburton.com.br, diego.barbosa@halliburton.com.br

    2010-07-01

    In the petroleum exploitation and production in deep water, at the fields operated by PETROBRAS, Brazil, one of the problems frequently found is the need of elimination of sand production, having in mind that the most of those fields produce from the non consolidated sandstones. The opened well Gravel Packing is the technique most used for that task. Due to the fact of Gravel Packing operations occurs at thousand of meters below the surface, it is necessary the computational simulation for forecasting how particle deposition (Gravel) in the well occurs. So, it was used the commercial pack of fluid dynamics FLUENT 12, which calculates the fluid velocity field, coupled to another commercial pack, the EDEM, based on discrete elements that treat of particle mechanics. The coupling of the two software has shown adequate the comparison of the computational results with the experimental data shows a good adjustment. Besides, it was possible to simulate problems of well early clogging, showing that the computational simulation is strong and capable of captivating such a phenomena.

  18. Is stand-alone D-dimer testing safe to rule out acute pulmonary embolism?

    Science.gov (United States)

    van Es, N; van der Hulle, T; Büller, H R; Klok, F A; Huisman, M V; Galipienzo, J; Di Nisio, M

    2017-02-01

    Essentials A stand-alone D-dimer below 750 μg/L has been proposed to rule out acute pulmonary embolism (PE). This was a post-hoc analysis on data from 6 studies comprising 7268 patients with suspected PE. The negative predictive value of a D-dimer pulmonary embolism (PE), without additional imaging, but this approach needs validation. Objectives To evaluate stand-alone D-dimer testing at a positivity threshold of 750 μg L-1 to rule out PE. Methods Individual data from 7268 patients with suspected PE previously enrolled in six prospective management studies were used. Patients were assessed by the Wells rule followed by quantitative D-dimer testing in those with a 'PE unlikely' score. Patients were classified post hoc as having a negative (< 750 μg L-1 ) or positive (≥ 750 μg L-1 ) D-dimer. Using a one-stage meta-analytic approach, the negative predictive value (NPV) of stand-alone D-dimer testing was evaluated overall and in different risk subgroups. Results The pooled incidence of PE was 23% (range, 13-42%). Overall, 44% of patients had a D-dimer < 750 μg L-1 , of whom 2.8% were diagnosed with PE at baseline or during 3-month follow-up (NPV, 97.2%; 95% confidence interval [CI], 94.9-98.5). The NPV was highest in patients with a low probability of PE according to the Wells rule (99.2%; 95% CI, 98.6-99.5%) and lowest in those with a high probability of PE (79.3%; 95% CI, 53.0-92.8%). The NPVs in patients with active cancer, patients with previous venous thromboembolism and inpatients were 96.2% (95% CI, 85.6-99.1%), 94.7% (95% CI, 88.6-97.6%) and 92.7% (95% CI, 79.3-97.7%), respectively. Conclusions Our findings suggest that stand-alone D-dimer testing at a positivity threshold of 750 μg L-1 is not safe to rule out acute PE. © 2016 International Society on Thrombosis and Haemostasis.

  19. Safe sex

    Science.gov (United States)

    ... sex; Sexually transmitted - safe sex; GC - safe sex; Gonorrhea - safe sex; Herpes - safe sex; HIV - safe sex; ... contact. STIs include: Chlamydia Genital herpes Genital warts Gonorrhea Hepatitis HIV HPV Syphilis STIs are also called ...

  20. Oral Challenge without Skin Testing Safely Excludes Clinically Significant Delayed-Onset Penicillin Hypersensitivity.

    Science.gov (United States)

    Confino-Cohen, Ronit; Rosman, Yossi; Meir-Shafrir, Keren; Stauber, Tali; Lachover-Roth, Idit; Hershko, Alon; Goldberg, Arnon

    Penicillins are the drug family most commonly associated with hypersensitivity reactions. Current guidelines recommend negative skin tests (ST) before re-administering penicillins to patients with previous nonimmediate reactions (NIR). The objective of this study was to examine whether ST are necessary before re-administering penicillin to patients with NIR. Patients with NIR to penicillins starting longer than 1 hour after last dose administration or starting any time after the first treatment day or patients with vague recollection of their reaction underwent penicillin ST. Disregarding ST results, patients were challenged with the relevant penicillins. One-tenth of the therapeutic dose followed by the full dose was administered at 1-hour interval and patients continued taking the full dose for 5 days. A total of 710 patients with alleged BL allergy were evaluated. Patients with a history of immediate reaction (52, 7.3%) or cephalosporin allergy (16, 2.2%) were excluded. Of the remaining 642 patients, 62.3% had negative ST, 5.3% positive ST, and 32.4% equivocal ST. A total of 617 (96.1%) patients were challenged. Immediate reaction was observed in 9 patients (1.5%): 1-positive ST, 7-negative ST, and 1-equivocal ST (P = .7). Late reaction to the first-day challenge occurred in 24 patients (4%). An at-home challenge was continued by 491 patients. Complete 5-day and partial challenges were well tolerated by 417 (85%) and 44 patients (8.9%), respectively, disregarding ST results. Thirty patients (6.1%) developed mild reactions to the home challenge regardless of their ST results. A 5-day oral challenge without preceding ST is safe and sufficient to exclude penicillin allergy after NIR developing during penicillin treatment. Copyright © 2017 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  1. Optimisation of baseline genotypic testing for safe and efficient maraviroc administration

    Directory of Open Access Journals (Sweden)

    S Sierra

    2012-11-01

    Full Text Available Different diagnostic parameters may affect the tropism prediction reliability. The impact of usage of FPR cut-offs<20%, use of viral RNA versus proviral DNA samples, single versus triple amplification, and presence of MVC resistance mutations on tropism prediction at baseline were analysed on 101 patients receiving maraviroc (MVC and correlated with their clinical outcome. This was a non-interventional, retrospective study. 82 RNA and 54 DNA samples from the 101 patients receiving MVC were obtained. The V3 region was sequenced and the tropism predicted using the geno2pheno[coreceptor] and T-CUP tools with FPR cut-offs of 5%, 7.5%, 10%, 15% and 20%. Additionally, 27/82 RNA and 28/54 DNA samples were analysed in triplicate and 34/82 samples with the ESTA assay. The influence of 16 MVC resistance mutations on clinical outcome was studied. The genotypic susceptibility score (GSS of the concomitant drugs was mapped to numerical values: susceptible to 1 (or 0.5 for NRTIs, intermediate to 0.5 (0.25 for NRTIs and resistant to 0. Detection of baseline R5 viruses in RNA (by geno2pheno[coreceptor] and T-CUP or DNA (by T-CUP samples correlated with MVC-treatment success. Both tools performed very similarly, with PPVs close to 90%, even with FPR cut-offs as low as 5%. The use of triple amplification did not improve the prediction value but reduced the number of patients elegible for MVC treatment. No influence of the GSS or MVC resistance mutations on the clinical outcome was detected. Genotypic tropism testing from viral RNA and proviral DNA using the geno2pheno[coreceptor] and T-CUP systems is valid to select candidates for MVC treatment. Our data suggest that the use of FPR cut-offs of 5–7.5% and single amplification from RNA or DNA would assure a safe administration of MVC without excluding many patients who could benefit from this potent antiretroviral drug.

  2. Lidar Data Analysis for Time to Headway Determination in the DriveSafe Project Field Tests

    Directory of Open Access Journals (Sweden)

    İlker Altay

    2013-01-01

    Full Text Available The DriveSafe project was carried out by a consortium of university research centers and automotive OEMs in Turkey to reduce accidents caused by driver behavior. A huge amount of driving data was collected from 108 drivers who drove the instrumented DriveSafe vehicle in the same route of 25 km of urban and highway traffic in Istanbul. One of the sensors used in the DriveSafe vehicle was a forward-looking LIDAR. The data from the LIDAR is used here to determine and record the headway time characteristics of different drivers. This paper concentrates on the analysis of LIDAR data from the DriveSafe vehicle. A simple algorithm that only looks at the forward direction along a straight line is used first. Headway times based on this simple approach are presented for an example driver. A more accurate detection and tracking algorithm taken from the literature are presented later in the paper. Grid-based and point distance-based methods are presented first. Then, a detection and tracking algorithm based on the Kalman filter is presented. The results are demonstrated using experimental data.

  3. Test of hybrid power system for electrical vehicles using a lithium-ion battery pack and a reformed methanol fuel cell range extender

    DEFF Research Database (Denmark)

    Andreasen, Søren Juhl; Ashworth, Leanne; Sahlin, Simon Lennart

    2014-01-01

    monoxide, the HTPEM fuel cell system can efficiently use a liquid methanol/water mixture of 60%/40% by volume, as fuel instead of compressed hydrogen, enabling potentially a higher volumetric energy density. In order to test the performance of such a system, the experimental validation conducted uses......This work presents the proof-of-concept of an electric traction power system with a high temperature polymer electrolyte membrane fuel cell range extender, usable for automotive class electrical vehicles. The hybrid system concept examined, consists of a power system where the primary power...... is delivered by a lithium ion battery pack. In order to increase the run time of the application connected to this battery pack, a high temperature PEM (HTPEM) fuel cell stack acts as an on-board charger able to charge a vehicle during operation as a series hybrid. Because of the high tolerance to carbon...

  4. Testing of Frank's hypothesis on a containerless packing of macroscopic soft spheres and comparison with mono-atomic metallic liquids

    Energy Technology Data Exchange (ETDEWEB)

    Sahu, K.K., E-mail: kisor.sahu@mat.ethz.ch [Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, 8093 Zurich (Switzerland); Wessels, V. [Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, 8093 Zurich (Switzerland); Kelton, K.F. [Department of Physics, Washington University, St. Louis, Missouri 63130 (United States); Loeffler, J.F. [Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich, 8093 Zurich (Switzerland)

    2011-06-15

    Highlights: > Testing of Frank's hypothesis for Centripetal Packing (CP) has been proposed. > It is shown that CP is an idealized model for Monatomic Supercooled Liquid (MSL). > The CP is fit for comparing with studies on MSL in a containerless environment. > We measure local orders in CP by HA and BOO methods for the first time. > It is shown that icosahedral order is greater in CP than MSL and reasons explored. - Abstract: It is well-known that metallic liquids can exist below their equilibrium melting temperature for a considerable time. To explain this, Frank proposed that icosahedral ordering, incompatible with crystalline long-range order, is prevalent in the atomic structure of these liquids, stabilizing them and enabling them to be supercooled. Some studies of the atomic structures of metallic liquids using Beam-line Electrostatic Levitation (BESL; containerless melting), and other techniques, support this hypothesis . Here we examine Frank's hypothesis in a system of macroscopic, monodisperse deformable spheres obtained by containerless packing under the influence of centripetal force. The local structure of this packing is analyzed and compared with atomic ensembles of liquid transition metals obtained by containerless melting using the BESL method.

  5. Penicillin skin testing is a safe and effective tool for evaluating penicillin allergy in the pediatric population.

    Science.gov (United States)

    Fox, Stephanie J; Park, Miguel A

    2014-01-01

    Penicillin skin testing has been validated in the evaluation of adult patients with penicillin allergy. However, the commercially available benzylpenicilloyl polylysine (Pre-Pen) is not indicated in the pediatric population. Moreover, the safety and validity of penicillin skin testing in the pediatric population has not been well studied. We describe the safety and validity of penicillin skin testing in the evaluation of children with a history of penicillin allergy. Children (penicillin allergy were evaluated with penicillin skin tests and were reviewed for basic demographics, penicillin skin test results, adverse drug reaction to penicillin after penicillin skin test, and adverse reaction to penicillin skin test. By using the χ(2) test, we compared the differences in the proportion of children and adults with a positive penicillin skin test. P value (penicillin skin testing; 703 of 778 patients had a negative penicillin skin test (90.4%), 66 had a positive test (8.5%), and 9 had an equivocal test (1.1%). Children were more likely to have a positive penicillin skin test (P penicillin skin test (52%) were challenged with penicillin, and 14 of 369 patients (3.8%) had an adverse drug reaction. No adverse reactions to penicillin skin testing were observed. Penicillin skin testing was safe and effective in the evaluation of children with a history of penicillin allergy. Copyright © 2014 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  6. D-dimer testing for safe exclusion and risk stratification in patients with acute pulmonary embolism in primary care

    Directory of Open Access Journals (Sweden)

    Zhou Yin

    2015-01-01

    Full Text Available Background: Safe exclusion and risk stratification are currently recommended for the initial management of patients with acute pulmonary embolism (APE. The aim of this study was to assess the safe exclusion and risk stratification value of D-dimer (DD for APE when tested at the beginning of admission. Materials and Methods: All consecutive Chinese APE patients and controls were recruited from January 2010 to December 2012. All measurements of serum indexes were made in duplicate and blinded to the patients′ status. All the 40 patients with the first episode of APE were confirmed by multi-detector computed tomographic pulmonary angiography. The plasma prothrombin time (PT, activated partial thromboplastin time, thrombin time, fibrinogen, and DD levels were measured within 24 h of admission. We used the Mann-Whitney U-test to determine the differences between groups and drew receiver operator characteristic curve to evaluate the indexes′ value in the APE screening. Results: The PT and DD in the APE group were significantly higher than those in the disease control group (P 1820 μg/L as cut-off value, the sensitivity, specificity, positive and negative predictive value was 82.5%, 75.2%, 56.9%, and 91.6%, respectively. Conclusion: The patients with APE showed significant higher DD levels compared with disease controls, suggesting a negative qualitative DD test result can safely and efficiently exclude APE in primary care.

  7. How to Safely Use Glucose Meters and Test Strips for Diabetes

    Science.gov (United States)

    ... The FDA is aware that some sellers are marketing pre-owned or secondhand test strips to consumers. These are unused test strips previously owned by someone else. These pre-owned strips may be sold at lower prices when ... see sellers marketing cheap test strips online. It is technically legal ...

  8. Safely Transporting the assembled EUSO-SPB instrument 1000 miles for field testing

    Science.gov (United States)

    Cummings, Austin; Gregg, Rachael; Polonsky, Zach

    2017-01-01

    The EUSO-SPB instrument assembled and tested at Colorado School of Mines and then transported in this state to the Telescope Array site in Delta Utah for field tests. 6 hours after arrival the instrument recorded first light from a laser 20 km distant. We describe the structures and methods that we developed drive this instrument to the test site. The vibration data collected during the 1000 mile round trip and the lessons learned will also be presented. In our experience, there is relatively little quantitative information available about this type of critical operation.

  9. Test duration for growth, feed intake, and feed efficiency in beef cattle using the GrowSafe System.

    Science.gov (United States)

    Wang, Z; Nkrumah, J D; Li, C; Basarab, J A; Goonewardene, L A; Okine, E K; Crews, D H; Moore, S S

    2006-09-01

    This study was conducted to determine the optimum test duration and the effect of missing data on accuracy of measuring feed efficiency and its 4 related traits ADG, DMI, feed conversion ratio, and residual feed intake in beef cattle using data from 456 steers with 5,397 weekly averaged feed intakes and BW repeated measurements taken over 91 d. Data were collected using the GrowSafe System at the University of Alberta Kinsella Research Station. The changes and relative changes in phenotypic residual variances and correlations (Pearson and Spearman) among data from shortened test durations (7, 14, 21, 28, 35, 42, 49, 56, 63, 70, 77, or 84 d) and a 91-d test were used to determine the optimum test duration for the 4 traits. The traits were fitted to a mixed model with repeated measures using SAS. Test durations for ADG, DMI, feed conversion ratio, and residual feed intake could be shortened to 63, 35, 42, and 63 d, respectively, without significantly reducing the accuracy of the tests when BW was measured weekly. The accuracy of the test was not compromised when up to 30% of the records were randomly removed after the first 35 d on test. These results have valuable and practical implications for performance and feed efficiency testing in beef cattle.

  10. Ensuring Safe Exploration: Ares Launch Vehicle Integrated Vehicle Ground Vibration Testing

    Science.gov (United States)

    Tuma, M. L.; Chenevert, D. J.

    2010-01-01

    Integrated vehicle ground vibration testing (IVGVT) will be a vital component for ensuring the safety of NASA's next generation of exploration vehicles to send human beings to the Moon and beyond. A ground vibration test (GVT) measures the fundamental dynamic characteristics of launch vehicles during various phases of flight. The Ares Flight & Integrated Test Office (FITO) will be leading the IVGVT for the Ares I crew launch vehicle at Marshall Space Flight Center (MSFC) from 2012 to 2014 using Test Stand (TS) 4550. MSFC conducted similar GVT for the Saturn V and Space Shuttle vehicles. FITO is responsible for performing the IVGVT on the Ares I crew launch vehicle, which will lift the Orion crew exploration vehicle to low Earth orbit, and the Ares V cargo launch vehicle, which can launch the lunar lander into orbit and send the combined Orionilander vehicles toward the Moon. Ares V consists of a six-engine core stage with two solid rocket boosters and an Earth departure stage (EDS). The same engine will power the EDS and the Ares I second stage. For the Ares IVGVT, the current plan is to test six configurations in three unique test positions inside TS 4550. Position 1 represents the entire launch stack at liftoff (using inert first stage segments). Position 2 consists of the entire launch stack at first stage burn-out (using empty first stage segments). Four Ares I second stage test configurations will be tested in Position 3, consisting of the Upper Stage and Orion crew module in four nominal conditions: J-2X engine ignition, post Launch Abort System (LAS) jettison, critical slosh mass, and J-2X burn-out. Because of long disuse, TS 4550 is being repaired and reactivated to conduct the Ares I IVGVT. The Shuttle-era platforms have been removed and are being replaced with mast climbers that provide ready access to the test articles and can be moved easily to support different positions within the test stand. The electrical power distribution system for TS 4550 was

  11. ENGINEERING DESIGN OPTIMIZATION OF HEEL TESTING EQUIPMENT IN THE EXPERIMENTAL VALIDATION OF SAFE WALKING

    Directory of Open Access Journals (Sweden)

    Cristiano Fragassa

    2017-06-01

    Full Text Available Experimental test methods for the evaluation of the resistance of heels of ladies' shoes in the case of impact loads are fully defined by International Organization for Standardization (ISO procedures that indicate all the conditions of experiment. A first Standard (ISO 19553 specifies the test method for determining the strength of the heels in the case of single impact. The result offers a valuation of the liability to fail under the sporadic heavy blows. A second Standard (ISO 19556 details a method for testing the capability of heels of women' shoes to survive to the repetition of small impacts provoked by normal walking. These Standards strictly define the features for two different testing devices (with specific materials, geometries, weights, etc. and all the experimental procedures to be followed during tests. On the contrary, this paper describes the technical solutions adopted to design one single experimental device able to perform impact testing of heels in both conditions. Joining the accuracy of mechanic movements with the speed of an electronic control system, a new and flexible equipment for the complete characterization of heels respect to (single or fatigue impacts was developed. Moreover a new level of performances in experimental validation of heel resistance was introduced by the versatility of the user-defined software control programs, able to encode every complex time-depending cycle of impact loads. Dynamic simulations permitted to investigate the impacts on heel in different conditions of testing, optimizing the machine design. The complexity of real stresses on shoes during an ordinary walk and in other common situations (as going up and downstairs was considered for a proper dimensioning.

  12. Standard test method for determination of "microwave safe for reheating" for ceramicware

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This test method determines the suitability of ceramicware for use in microwave re-heating applications. Microwave ovens are mainly used for reheating and defrosting frozen foods. Severe thermal conditions can occur while reheating foods. Typical reheating of foods requires one to five min. in the microwave at the highest power settings. Longer periods than five minutes are considered cooking. Cooking test methods and standards are not addressed in this test method. Most ceramicware is minimally absorbing of the microwave energy and will not heat up significantly. Unfortunately there are some products that absorb microwave energy to a greater extent and can become very hot in the microwave and pose a serious hazard. Additionally, the nature of microwave heating introduces radiation in a non-uniform manner producing temperature differentials in the food being cooked as well as the ceramic container holding it. The differential may become great enough to thermal shock the ware and create dangerous condition...

  13. Repeat testing for chlamydia trachomatis, a "safe approach" to unsafe sex? a qualitative exploration among youth in Stockholm.

    Science.gov (United States)

    Nielsen, Anna; De Costa, Ayesha; Danielsson, Kristina Gemzell; Salazar, Mariano

    2017-11-15

    Chlamydia trachomatis testing is offered to youth in Sweden, through a network of Youth Health Clinics, free at the point of care, in an attempt to bring down the prevalence and incidence of the infection. Nevertheless, infections rates have continued to rise during the past two decades and re-testing rates among youth for Chlamydia trachomatis has been reported to be high in Stockholm County. A few literature reports suggest that testing for sexually transmitted infections and the test result itself can have an undesirable impact on the sexual behaviour for the individual, i.e. increase sexual risk-taking. This qualitative study aimed to explore the motives for repeated testing for Chlamydia trachomatis among youth using the services of the Youth Health Clinics in Stockholm, and how testing affects their subsequent risk-taking. We interviewed 15 repeat testers aging 18-22 years. Our main findings were that the fear of social stigma related to infecting a peer was a major driver of the re-testing process. The repetitive testing process, the test result, and the encounter with personnel did not decrease sexual risk-taking among this group. While testing and treatment services are an important part of Chlamydia trachomatis prevention it must not take the focus away from primary prevention strategies. Testing should be encouraged, but not to the exclusion of risk reduction measures. The testing services must be complemented with stronger emphasis on safe sex, especially for those who attend the clinics repeatedly, otherwise the easy accessible testing services risk counteracting its own purpose. Future research should focus on developing and evaluating youth appropriate interventions to increase condom use, taking into consideration factors which youth perceive as important to drive this behaviour change.

  14. Nucleic acid testing: Is it the only answer for safe Blood in India?

    Directory of Open Access Journals (Sweden)

    N K Naidu

    2016-01-01

    Full Text Available Background: With the implementation of NAT in countries around the world, there is a growing pressure on the transfusion services in India to adopt NAT testing. India has about 2545 licensed Blood Centres. The Transfusion Services in India are fragmented, poorly regulated and the quality standards are poorly implemented. Blood Centres are still dependent on replacement/family donors and in most places laboratory testing for Transfusion transmitted infections is not quality assured, laboratory equipment are not calibrated and maintained, and validation of results is not carried out. Against the current scenario introducing NAT for screening of blood donors in India would pose a challenge. Aim: To study the prudence of universal NAT testing in India. Materials and Methods : A retrospective study of 5 years from 2008-2012 was undertaken to study the true reactivity of donors using WHO strategy II and III and therefore the true seroprevalence of TTI infections in the donor populations. Results : The true reactivity of the donors was much less as compared to the initially reactive donors due to the use of a well designed testing algorithm. In addition having a total voluntary blood collection along with good pre-donation counseling program also reduces the transmission of infections. Conclusions : What India essentially needs to do is religiously implement the strategies outlined in the WHO Aide-memoire. The blood should be collected only from voluntary non remunerative and repeat donors , there should be stringent donor selection with pre-donation counseling instituted. Strict implementation of quality management system, development of well defined testing startegies and strong haemovigilance system could take us a step in the right direction.

  15. Nucleic acid testing: Is it the only answer for safe Blood in India?

    Science.gov (United States)

    Naidu, N K; Bharucha, Z S; Sonawane, Vandana; Ahmed, Imran

    2016-01-01

    With the implementation of NAT in countries around the world, there is a growing pressure on the transfusion services in India to adopt NAT testing. India has about 2545 licensed Blood Centres. The Transfusion Services in India are fragmented, poorly regulated and the quality standards are poorly implemented. Blood Centres are still dependent on replacement/family donors and in most places laboratory testing for Transfusion transmitted infections is not quality assured, laboratory equipment are not calibrated and maintained, and validation of results is not carried out. Against the current scenario introducing NAT for screening of blood donors in India would pose a challenge. To study the prudence of universal NAT testing in India. A retrospective study of 5 years from 2008-2012 was undertaken to study the true reactivity of donors using WHO strategy II and III and therefore the true seroprevalence of TTI infections in the donor populations. The true reactivity of the donors was much less as compared to the initially reactive donors due to the use of a well designed testing algorithm. In addition having a total voluntary blood collection along with good pre-donation counseling program also reduces the transmission of infections. What India essentially needs to do is religiously implement the strategies outlined in the WHO Aide-memoire. The blood should be collected only from voluntary non remunerative and repeat donors, there should be stringent donor selection with pre-donation counseling instituted. Strict implementation of quality management system, development of well defined testing startegies and strong haemovigilance system could take us a step in the right direction.

  16. Does Post Septoplasty Nasal Packing Reduce Complications?

    Directory of Open Access Journals (Sweden)

    Bijan Naghibzadeh

    2011-01-01

    Full Text Available The main issues in nasal surgery are to stabilize the nose in the good position after surgery and preserve the cartilages and bones in the favorable situation and reduce the risk of deviation recurrence. Also it is necessary to avoid the synechia formation, nasal valve narrowing, hematoma and bleeding. Due to the above mentioned problems and in order to solve and minimize them nasal packing, nasal splint and nasal mold have been advised. Patients for whom the nasal packing used may faced to some problems like naso-pulmonary reflex, intractable pain, sleep disorder, post operation infection and very dangerous complication like toxic shock syndrome. We have two groups of patients and three surgeons (one of the surgeons used post operative nasal packing in his patients and the two others surgeons did not.Complications and morbidities were compared in these two groups. Comparing the two groups showed that the rate of complication and morbidities between these two groups were same and the differences were not valuable, except the pain and discomfort post operatively and at the time of its removal. Nasal packing has several risks for the patients while its effects are not studied. Septoplasty can be safely performed without postoperative nasal packing. Nasal packing had no main findings that compensated its usage. Septal suture is one of the procedures that can be used as alternative method to nasal packing. Therefore the nasal packing after septoplasty should be reserved for the patients with increased risk of bleeding.

  17. Rapid Bedside Inactivation of Ebola Virus for Safe Nucleic Acid Tests

    DEFF Research Database (Denmark)

    Rosenstierne, Maiken Worsøe; Karlberg, Helen; Bragstad, Karoline

    2016-01-01

    for nucleic acid extraction inactivates Ebola virus. A rapid bedside inactivation method for nucleic acid tests is obtained by simply adding Magna Pure lysis/binding buffer directly into vacuum blood collection EDTA tubes using a thin needle and syringe prior to sampling. The ready-to-use inactivation vacuum......Rapid bedside inactivation of Ebola virus would be a solution for the safety of medical and technical staff, risk containment, sample transport, and high-throughput or rapid diagnostic testing during an outbreak. We show that the commercially available Magna Pure lysis/binding buffer used...... tubes are stable for more than 4 months, and Ebola virus RNA is preserved in the Magna Pure lysis/binding buffer for at least 5 weeks independent of the storage temperature. We also show that Ebola virus RNA can be manually extracted from Magna Pure lysis/binding buffer-inactivated samples using...

  18. Common Diaper Ingredient Questions: Modern Disposable Diaper Materials Are Safe and Extensively Tested.

    Science.gov (United States)

    Counts, Jennifer; Weisbrod, Annie; Yin, Shan

    2017-05-01

    Today's disposable diapers are high-performance and well-tested products, designed to keep skin dry and healthy. They are primarily made of biologically inert polymers, commonly used in fabrics and other materials that are in contact with skin, and in foods and cosmetics. Still, product safety and ingredients in everyday products can be a source of anxiety for new parents. This article provides the facts behind some commonly asked questions from consumers about diaper ingredients and safety, including myths and facts related to chlorine, latex, dyes, and chemical additives.

  19. Contaminant bacteria in traditional-packed honey

    Directory of Open Access Journals (Sweden)

    Hening Tjaturina Pramesti

    2007-03-01

    Full Text Available Honey may be contaminated by microorganisms during its harvesting, processing, and packaging. Honey selected for clinical purposes must safe, sterile, and contain antimicrobial activity, so it must be evaluated using laboratory testing. The aim of this descriptive laboratory study was to isolate and identify the bacterial contaminant in the traditional-packed honey dealing with the use of honey for medical purposes. the colony forming units of honey sample cultured on blood agar were counted using Stuart bacterial colony counter. The suspected bacterial colonies were isolated and identified based on cultural morphology characteristics. The isolates of suspected bacterial colonies were stained according to Gram and Klein method and then were examined by the biochemical reaction. The results showed that there were two contaminant bacteria. Gram-positive cocci which were presumptively identified as coagulase-negative Staphylococci and gram-positive rods which were presumptively identified as Bacillus subtilis. In conclusion, the contaminant bacteria were regarded as low pathogen bacteria. The subtilin enzyme of B subtilis may cause an allergic reaction and coagulase-negative Staphylococci, Staphylococcus epidermidis is also an opportunist pathogen. Inevitably, for medical purposes, traditional-packed honey must be well filtered, water content above 18%, and standardized sterilization without loss of an antibacterial activity or change in properties.

  20. ExactPack Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, Robert Jr. [Los Alamos National Laboratory; Israel, Daniel M. [Los Alamos National Laboratory; Doebling, Scott William [Los Alamos National Laboratory; Woods, Charles Nathan [Los Alamos National Laboratory; Kaul, Ann [Los Alamos National Laboratory; Walter, John William Jr [Los Alamos National Laboratory; Rogers, Michael Lloyd [Los Alamos National Laboratory

    2016-05-09

    For code verification, one compares the code output against known exact solutions. There are many standard test problems used in this capacity, such as the Noh and Sedov problems. ExactPack is a utility that integrates many of these exact solution codes into a common API (application program interface), and can be used as a stand-alone code or as a python package. ExactPack consists of python driver scripts that access a library of exact solutions written in Fortran or Python. The spatial profiles of the relevant physical quantities, such as the density, fluid velocity, sound speed, or internal energy, are returned at a time specified by the user. The solution profiles can be viewed and examined by a command line interface or a graphical user interface, and a number of analysis tools and unit tests are also provided. We have documented the physics of each problem in the solution library, and provided complete documentation on how to extend the library to include additional exact solutions. ExactPack’s code architecture makes it easy to extend the solution-code library to include additional exact solutions in a robust, reliable, and maintainable manner.

  1. Grimsel test site. Research on safe geological disposal of radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-15

    The Grimsel Test Site is located at an altitude of 1730 meters in the granitic formations of the Aare Massif. Some 300 million years ago, magmas solidified to form granitic rocks in the Grimsel area. New molten masses flowed into fissures of the cooling rock and formed dyke rocks. During the alpine orogeny around 40 million years ago, the rocks of the Aare Massif were passed over by the northwards-moving alpine layers and subsided by around 12 kilometres. The rocks were then overprinted under high temperature and pressure conditions and shear zones and fracture systems were formed. Uplift (0.5 to 0.8 mm/a) and erosion processes, which are still continuing today, brought the rocks of the Aare Massif to the surface once more. The mineral fractures for which the Grimsel area is famous, formed around 14 million years ago. Deep in the rock, the range of geological conditions found in the laboratory present ideal boundary conditions for investigating the functioning of both the geological and engineered barriers of deep repositories. Projects that look at the disposal concepts on a large scale are also an important aspect of the work at the Test Site. A radiation controlled zone allows radionuclides to be used under monitored conditions, giving a direct insight into the transport of radioactive substances in the rock. Around 25 partner organisations from various countries are involved in the projects at the Test Site. The European Union and the Swiss State Secretariat for Education and Research provide financial support to several experiments. In Switzerland, deep geological disposal is required by law for all types of radioactive waste. Field investigations for determining the suitability of potential disposal sites are an important component of a waste management programme. The field work is complemented by laboratory studies, investigations of relevant natural processes and research projects in underground rock laboratories; these provide a better understanding of the

  2. A Safe and Healthful Work Environment: Development and Testing of an Undergraduate Occupational Health Nursing Curriculum.

    Science.gov (United States)

    McCullagh, Marjorie C; Berry, Peggy

    2015-08-01

    Occupational health nursing focuses on promotion and restoration of health, prevention of illness and injury, protection from work-related and environmental hazards, and corporate profitability. Quality education about the relationship between work and health is critical for nurses' success regardless of work setting, and is consistent with Healthy People 2020 goals, but is lacking or limited in some programs. This report introduces an innovative occupational health nursing curriculum for students enrolled in baccalaureate nursing programs. The process of designing and pilot testing this novel curriculum, its alignment with nursing competencies, and its format and learning activities are described. Preparing professional nurses to understand the role of the occupational health nurse and the relationship between work and health is an essential curricular consideration for contemporary nursing education. © 2015 The Author(s).

  3. Choosing safe dispersing media for C60 fullerenes by using cytotoxicity tests on the bacterium Escherichia coli.

    Science.gov (United States)

    Cook, Sean M; Aker, Winfred G; Rasulev, Bakhtiyor F; Hwang, Huey-Min; Leszczynski, Jerzy; Jenkins, Jessica J; Shockley, Vincent

    2010-04-15

    Assessment of C(60) nanotoxicity requires a variety of strategies for dispersing it into biological systems. Our objective was to determine organic solvent/surfactant combinations suitable for this purpose. We used Escherichia coli (ATCC# 25254) to determine the cytotoxicity of C(60) in solvents at concentrations up to 100 ppm. In this preliminary study we hypothesized that C(60) toxicity is directly correlated with its degree of dispersion in solution and that more solubilizing solvents induce higher toxicity. Test solvent concentration (1%) and Tween 80 (0.04%) were based on E. coli viability assay. Sonication was used to further enhance C(60) dispersal. The end-point response was measured with viability (in terms of LC(50)) and general metabolic activity (in terms of IC(50)) of E. coli cultures after exposure. The ultimate goal was to select safe dispersing media and enrich the database of C(60) nanotoxicity for NanoQuantitative-Structure-Activity-Relationship (NanoQSAR) applications. LC(50) range was 30 ppm to >400 ppm. IC(50) followed the trend. Among the six solvent combinations, DMSO combined with Tween 80 was the optimum combination for defining a dose-response relationship for assessing its toxicity to E. coli. However, N,N-dimethylformamide has the greatest potential to be a safe solvent for C(60) applications based upon its biocompatibility. Solvent solubility alone could not account for the cytotoxicity observed in this study. 2009 Elsevier B.V. All rights reserved.

  4. Optimal Switching Table-Based Sliding Mode Control of an Energy Recovery Li-Ion Power Accumulator Battery Pack Testing System

    Directory of Open Access Journals (Sweden)

    Kil To Chong

    2013-10-01

    Full Text Available The main objective of the present work is to apply a sliding mode controller (SMC to medium voltage and high power output energy recovery Li-ion power accumulator battery pack testing systems (ERLPABTSs, which are composed of a three-level neutral-point-clamped (NPC three-phase voltage source inverter (VSI and a two-level buck-boost converter without an isolating transformer. An inner current decoupled control scheme for the aforementioned system is proposed and two sliding mode planes for active and reactive current control are designed based on the control scheme. An optimized switching table for current convergence is used according to the error sign of the equivalent input voltage and feedback voltage. The proposed ERLPABTS could be used to integrate discharging energy into the power grid when performing high accuracy current testing. The active and reactive power references for the grid-connected inverter are determined based on the discharging energy from the DC-DC converter. Simulations and experiments on a laboratory hardware platform using a 175 kW insulated gate bipolar transistor (IGBT-based ERLPABTS have been implemented and verified, and the performance is found satisfactory and superior to conventional ERLPABPTS.

  5. Helicopter Flight Test of 3-D Imaging Flash LIDAR Technology for Safe, Autonomous, and Precise Planetary Landing

    Science.gov (United States)

    Roback, Vincent; Bulyshev, Alexander; Amzajerdian, Farzin; Reisse, Robert

    2013-01-01

    Two flash lidars, integrated from a number of cutting-edge components from industry and NASA, are lab characterized and flight tested for determination of maximum operational range under the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project (in its fourth development and field test cycle) which is seeking to develop a guidance, navigation, and control (GN&C) and sensing system based on lidar technology capable of enabling safe, precise crewed or robotic landings in challenging terrain on planetary bodies under any ambient lighting conditions. The flash lidars incorporate pioneering 3-D imaging cameras based on Indium-Gallium-Arsenide Avalanche Photo Diode (InGaAs APD) and novel micro-electronic technology for a 128 x 128 pixel array operating at 30 Hz, high pulse-energy 1.06 micrometer Nd:YAG lasers, and high performance transmitter and receiver fixed and zoom optics. The two flash lidars are characterized on the NASA-Langley Research Center (LaRC) Sensor Test Range, integrated with other portions of the ALHAT GN&C system from partner organizations into an instrument pod at NASA-JPL, integrated onto an Erickson Aircrane Helicopter at NASA-Dryden, and flight tested at the Edwards AFB Rogers dry lakebed over a field of human-made geometric hazards during the summer of 2010. Results show that the maximum operational range goal of 1 km is met and exceeded up to a value of 1.2 km. In addition, calibrated 3-D images of several hazards are acquired in real-time for later reconstruction into Digital Elevation Maps (DEM's).

  6. Design and Testing of a Labview- Controlled Catalytic Packed- Bed Reactor System For Production of Hydrocarbon Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Street, J.; Yu, F.; Warnock, J.; Wooten, J.; Columbus, E.; White, M. G.

    2012-05-01

    Gasified woody biomass (producer gas) was converted over a Mo/H+ZSM-5 catalyst to produce gasolinerange hydrocarbons. The effect of contaminants in the producer gas showed that key retardants in the system included ammonia and oxygen. The production of gasoline-range hydrocarbons derived from producer gas was studied and compared with gasoline-range hydrocarbon production from two control syngas mixes. Certain mole ratios of syngas mixes were introduced into the system to evaluate whether or not the heat created from the exothermic reaction could be properly controlled. Contaminant-free syngas was used to determine hydrocarbon production with similar mole values of the producer gas from the gasifier. Contaminant-free syngas was also used to test an ideal contaminant-free synthesis gas situation to mimic our particular downdraft gasifier. Producer gas was used in this study to determine the feasibility of using producer gas to create gasoline-range hydrocarbons on an industrial scale using a specific Mo/H+ZSM-5 catalyst. It was determined that after removing the ammonia, other contaminants poisoned the catalyst and retarded the hydrocarbon production process as well.

  7. Radon Testing for Safe Schools Act. Report (To Accompany S. 1697) from the Committee on Environment and Public Works, United States Senate, One Hundred First Congress, Second Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Environment and Public Works.

    This report was written to accompany the Radon Testing for Safe Schools Act (S.1697), a bill that provides for radon testing of schools located in high risk radon areas and provides limited financial assistance to schools for mitigation of high levels of radon. A description of radon, its harmful effects, and the radon levels detected in schools…

  8. TLC Pack Unpacked

    Science.gov (United States)

    Oberhofer, Margret; Colpaert, Jozef

    2015-01-01

    TLC Pack stands for Teaching Languages to Caregivers and is a course designed to support migrants working or hoping to work in the caregiving sector. The TLC Pack resources range from A2 to B2 level of the Common European Framework of Reference for Languages (CEFR), and will be made available online in the six project languages: Dutch, English,…

  9. Packing degenerate graphs greedily

    Czech Academy of Sciences Publication Activity Database

    Allen, P.; Böttcher, J.; Hladký, J.; Piguet, Diana

    2017-01-01

    Roč. 61, August (2017), s. 45-51 ISSN 1571-0653 R&D Projects: GA ČR GJ16-07822Y Institutional support: RVO:67985807 Keywords : tree packing conjecture * graph packing * graph processes Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics

  10. Safe cycling!

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    The HSE Unit will be running a cycling safety campaign at the entrances to CERN's restaurants on 14, 15 and 16 May. Pop along to see if they can persuade you to get back in the saddle!   With summer on its way, you might feel like getting your bike out of winter storage. Well, the HSE Unit has come up with some original ideas to remind you of some of the most basic safety rules. This year, the prevention campaign will be focussing on three themes: "Cyclists and their equipment", "The bicycle on the road", and "Other road users". This is an opportunity to think about the condition of your bike as well as how you ride it. From 14 to 16 May, representatives of the Swiss Office of Accident Prevention and the Touring Club Suisse will join members of the HSE Unit at the entrances to CERN's restaurants to give you advice on safe cycling (see box). They will also be organising three activity stands where you can test your knowle...

  11. Development of an effective valve packing program

    Energy Technology Data Exchange (ETDEWEB)

    Hart, K.A.

    1996-12-01

    Current data now shows that graphite valve packing installed within the guidance of a controlled program produces not only reliable stem sealing but predictable running loads. By utilizing recent technological developments in valve performance monitoring for both MOV`s and AOV`s, valve packing performance can be enhanced while reducing maintenance costs. Once known, values are established for acceptable valve packing loads, the measurement of actual valve running loads via the current MOV/AOV diagnostic techniques can provide indication of future valve stem sealing problems, improper valve packing installation or identify the opportunity for valve packing program improvements. At times the full benefit of these advances in material and predictive technology remain under utilized due to simple past misconceptions associated with valve packing. This paper will explore the basis for these misconceptions, provide general insight into the current understanding of valve packing and demonstrate how with this new understanding and current valve diagnostic equipment the key aspects required to develop an effective, quality valve packing program fit together. The cost and operational benefits provided by this approach can be significant impact by the: elimination of periodic valve repacking, reduction of maintenance costs, benefits of leak-free valve operation, justification for reduced Post Maintenance Test Requirements, reduced radiation exposure, improved plant appearance.

  12. SAFE Newsletter

    OpenAIRE

    2013-01-01

    The Center of Excellence SAFE – “Sustainable Architecture for Finance in Europe” – is a cooperation of the Center for Financial Studies and Goethe University Frankfurt. It is funded by the LOEWE initiative of the State of Hessen (Landes-Offensive zur Entwicklung wissenschaftlich-ökonomischer Exzellenz). SAFE brings together more than 40 professors and just as many junior researchers who are all dedicated to conducting research in support of a sustainable financial architecture. The Center has...

  13. Packing in protein cores

    Science.gov (United States)

    Gaines, J. C.; Clark, A. H.; Regan, L.; O'Hern, C. S.

    2017-07-01

    Proteins are biological polymers that underlie all cellular functions. The first high-resolution protein structures were determined by x-ray crystallography in the 1960s. Since then, there has been continued interest in understanding and predicting protein structure and stability. It is well-established that a large contribution to protein stability originates from the sequestration from solvent of hydrophobic residues in the protein core. How are such hydrophobic residues arranged in the core; how can one best model the packing of these residues, and are residues loosely packed with multiple allowed side chain conformations or densely packed with a single allowed side chain conformation? Here we show that to properly model the packing of residues in protein cores it is essential that amino acids are represented by appropriately calibrated atom sizes, and that hydrogen atoms are explicitly included. We show that protein cores possess a packing fraction of φ ≈ 0.56 , which is significantly less than the typically quoted value of 0.74 obtained using the extended atom representation. We also compare the results for the packing of amino acids in protein cores to results obtained for jammed packings from discrete element simulations of spheres, elongated particles, and composite particles with bumpy surfaces. We show that amino acids in protein cores pack as densely as disordered jammed packings of particles with similar values for the aspect ratio and bumpiness as found for amino acids. Knowing the structural properties of protein cores is of both fundamental and practical importance. Practically, it enables the assessment of changes in the structure and stability of proteins arising from amino acid mutations (such as those identified as a result of the massive human genome sequencing efforts) and the design of new folded, stable proteins and protein-protein interactions with tunable specificity and affinity.

  14. Optimized packings with applications

    CERN Document Server

    Pintér, János

    2015-01-01

    This volume presents a selection of case studies that address a substantial range of optimized object packings (OOP) and their applications. The contributing authors are well-recognized researchers and practitioners. The mathematical modelling and numerical solution aspects of each application case study are presented in sufficient detail. A broad range of OOP problems are discussed: these include various specific and non-standard container loading and object packing problems, as well as the stowing of hazardous and other materials on container ships, data centre resource management, automotive engineering design, space station logistic support, cutting and packing problems with placement constraints, the optimal design of LED street lighting, robust sensor deployment strategies, spatial scheduling problems, and graph coloring models and metaheuristics for packing applications. Novel points of view related to model development and to computational nonlinear, global, mixed integer optimization and heuristic st...

  15. Layered circle packings

    Directory of Open Access Journals (Sweden)

    David Dennis

    2005-01-01

    Full Text Available Given a bounded sequence of integers {d0,d1,d2,…}, 6≤dn≤M, there is an associated abstract triangulation created by building up layers of vertices so that vertices on the nth layer have degree dn. This triangulation can be realized via a circle packing which fills either the Euclidean or the hyperbolic plane. We give necessary and sufficient conditions to determine the type of the packing given the defining sequence {dn}.

  16. Evaluation of the shelf life of sterile instrument packs.

    Science.gov (United States)

    Butt, W E; Bradley, D V; Mayhew, R B; Schwartz, R S

    1991-12-01

    No published studies have specifically addressed the shelf life of sterile packaging materials commonly used in dentistry. This study examined the effect of time on the sterile integrity: paper envelopes, peel pouches, and nylon sleeves. Seven thousand two hundred sample packs, each containing three glass rods, were prepared and steam sterilized. After sterilization, half the packs (control packs) were immediately opened and the contents were analyzed for bacterial contamination. The other half (test packs) were randomly sorted and stored in dental treatment operatories. At monthly intervals for 12 months, 100 packs of each type were similarly opened and analyzed. The contamination rates between the control packs were not significantly different from one another. Differences in contamination rates between control packs and test packs for both the paper envelopes (0.4% and 0.7%) and the peel pouches (0.2% and 0.2%) were also insignificant. However, a significant difference (p less than 0.01) between control and test packs (0.3% and 1.5%) was found for the nylon sleeves. This increase was not time related and was attributed to difficulty in removing the glass rods from the nylon packs in a sterile manner. The most important finding was the absence of a trend toward an increased rate of contamination over time for any pack type. This indicates that when these materials are placed in covered storage in dental operatories, a 12-month storage period is not detrimental to their sterile integrity.

  17. Design Development Test and Evaluation (DDT and E) Considerations for Safe and Reliable Human Rated Spacecraft Systems

    Science.gov (United States)

    Miller, James; Leggett, Jay; Kramer-White, Julie

    2008-01-01

    A team directed by the NASA Engineering and Safety Center (NESC) collected methodologies for how best to develop safe and reliable human rated systems and how to identify the drivers that provide the basis for assessing safety and reliability. The team also identified techniques, methodologies, and best practices to assure that NASA can develop safe and reliable human rated systems. The results are drawn from a wide variety of resources, from experts involved with the space program since its inception to the best-practices espoused in contemporary engineering doctrine. This report focuses on safety and reliability considerations and does not duplicate or update any existing references. Neither does it intend to replace existing standards and policy.

  18. Battery Pack Thermal Design

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, Ahmad

    2016-06-14

    This presentation describes the thermal design of battery packs at the National Renewable Energy Laboratory. A battery thermal management system essential for xEVs for both normal operation during daily driving (achieving life and performance) and off-normal operation during abuse conditions (achieving safety). The battery thermal management system needs to be optimized with the right tools for the lowest cost. Experimental tools such as NREL's isothermal battery calorimeter, thermal imaging, and heat transfer setups are needed. Thermal models and computer-aided engineering tools are useful for robust designs. During abuse conditions, designs should prevent cell-to-cell propagation in a module/pack (i.e., keep the fire small and manageable). NREL's battery ISC device can be used for evaluating the robustness of a module/pack to cell-to-cell propagation.

  19. Safe sex.

    Science.gov (United States)

    Mukherjee, G; Ghosh, T K

    1994-01-01

    The main objectives of health care for people with AIDS are to help them adjust to changing sexual status and to provide them with information on safe sex. Sections consider the risks of various types of sexual activity and safe sex education. With regard to the risk of transmitting or contracting HIV, sexual activities may be high risk, medium risk, low risk, or no risk. High-risk activities include unprotected anal or vaginal intercourse, oral-anal sexual contact, sharing sex toys, and traumatic sexual activity. Medium-risk activities include anal and vaginal intercourse using a latex condom with or without spermicide, and sex using a vaginal diaphragm or contraceptive vaginal sponge. Oral sex on a woman or oral sex on a man without ejaculation into the mouth are low-risk activities. Mutual masturbation, erotic touching, caressing and massage, kissing and non-genital licking pose no risk of infection. All general practitioners and family physicians should teach about safe sex. Prevention messages may be conveyed through individual and social counseling as well as with printed media and other forms of mass media. Messages should definitely reach prostitutes and brothel owners, as well as pre-pubertal children and older youths.

  20. SHORT COMMUNICATION: Reduction of Spirometric Lung Function Tests in Habitually Smoking Healthy Young Adults: It’s Correlation with Pack Years

    Directory of Open Access Journals (Sweden)

    Sumangala M Patil

    2012-01-01

    Full Text Available Background: Adolescent smoking and the subsequent health problems are a major concern today. However there are very few studies done on spirometric lung functions and its relation with pack years in young adult habitual smokers who are apparently healthy. Aims and Objectives: The present study is undertaken to assess the change in lung functions in apparently healthy young adult habitual smokers compared to their age matched controls. Materials and Methods: A random sample of apparently healthy young adult habitual smokers (n=40 and nonsmokers (n=40 between age group17-35 years with history suggesting of pack years of 2-10 years were selected from students & employee’s of B.L.D.E.U’s Sri B.M. Patil Medical College,Hospital & Research Centre Bijapur (Karnataka, India. Spirometric lung functions recorded were forced expiratory volume in one second (FEV1, FEV1%, Peak expiratory flow rate (PEFR and Maximal expiratory pressure (MEP. Results: The results suggested that inapparently healthy habitual smokers there was significant decrease in FEV1 (L (-13.34%, p<0.001, FEV1 % (-10.76%, p<0.001, PEFR (-45.26%, p<0.0001 and MEP (-35.51%, p<0.0001 compared to nonsmokers and decrease in FEV1 was negatively correlated withpack years in smokers (r2=0.063, p=0.001. Reduced lung functions and negative correlation to pack years may be attributed todecreased airway diameter & reflex broncho- constriction in response to inhaled smoke particles. Conclusions: In conclusion young adulthabitual smokers who were apparently healthy are more prone for respiratory dysfunction than their nonsmoker counterparts. FEV1 reduction in relation to pack years acts as an important determinant for detecting lung dysfunction in the early stage of the disease. As the risk of having smoking related diseases depends mainly on number of pack years, it is suggested that quitting smoking earliest helps to get greatest health benefits in apparently healthy young adult habitual smokers.

  1. The Six Pack Model

    DEFF Research Database (Denmark)

    Andersen, Henrik; Ritter, Thomas

    Ever seen a growth strategies fail because it was not connect ed to the firm’s customer base? Or a customer relationship strategy falters just because it was the wrong thing to do with that given customer? This article presents the six pack model, a tool that makes growth profitable and predictable...

  2. Fetal Tissues Tested for Microbial Sterility by Culture- and PCR-Based Methods Can be Safely Used in Clinics.

    Science.gov (United States)

    Vitrenko, Yakov; Kostenko, Iryna; Kulebyakina, Kateryna; Duda, Alla; Klunnyk, Mariya; Sorochynska, Khrystyna

    2017-02-16

    Cell preparations to be used in clinical practice must be free of infectious agents. Safety concerns are especially elevated upon the use of human fetal tissues, which are otherwise highly advantageous in cell therapy. We demonstrate that treating fetal samples with antibiotic, extensive washing, and homogenization prior to cryoconservation efficiently removes microbes in general. Screening a large collection by an automatic culture system showed that 89.2% fetal tissue samples were sterile, while contamination was detected in 10.8% samples. Liver and chorion were contaminated more than the brain, kidney, lung, and soft tissues. Broad-range PCR from the bacterial 16s rRNA gene was adopted as a confirmatory assay; however, the concordance between the culture-based and PCR assays was weak. Taxonomic identification was done for contaminated samples by bacteriological methods and sequencing 16s rRNA PCR products. The two approaches revealed different spectra of taxonomic groups sharing only Lactobacillus, the most frequently found genus. In addition, other representatives of vaginal microbiota were detected by culture-based identification, while PCR product sequencing has also revealed a subset of nosocomial microorganisms. Importantly, species known to cause sepsis were identified by both techniques, arguing for their indispensability and mutual complementarity. We suggest that most contaminations are taken up during collection of fetal material rather than originating from an in utero infection. In conclusion, a rigorous microbiological control by culture and PCR is a prerequisite for safe clinical use of fetal tissue suspensions.

  3. No moving parts safe & arm apparatus and method with monitoring and built-in-test for optical firing of explosive systems

    Science.gov (United States)

    Hendrix, J.L.

    1995-04-11

    A laser initiated ordnance controller apparatus which provides a safe and arm scheme with no moving parts. The safe & arm apparatus provides isolation of firing energy to explosive devices using a combination of polarization isolation and control through acousto-optical deviation of laser energy pulses. The apparatus provides constant monitoring of the systems status and performs 100% built-in-test at any time prior to ordnance ignition without the risk of premature ignition or detonation. The apparatus has a computer controller, a solid state laser, an acousto-optic deflector and RF drive circuitry, built-in-test optics and electronics, and system monitoring capabilities. The optical system is completed from the laser beam power source to the pyrotechnic ordnance through fiber optic cabling, optical splitters and optical connectors. During operation of the apparatus, a command is provided by the computer controller and, simultaneous with laser flashlamp fire, the safe & arm device is opened for approximately 200 microseconds which allows the laser pulse to transmit through the device. The arm signal also energizes the laser power supply and activates the acousto-optical deflector. When the correct fire format command is received, the acousto-optic deflector moves to the selected event channel, and the channel is verified to ensure the system is pointing to the correct position. Laser energy is transmitted through the fiber where an ignitor or detonator designed to be sensitive to optical pulses is fired at the end of the fiber channel. Simultaneous event channels may also be utilized by optically splitting a single event channel. The built-in-test may be performed anytime prior to ordnance ignition. 6 figures.

  4. Testing for thiopurine methyltransferase status for safe and effective thiopurine administration: a systematic review of clinical guidance documents.

    Science.gov (United States)

    Burnett, H F; Tanoshima, R; Chandranipapongse, W; Madadi, P; Ito, S; Ungar, W J

    2014-12-01

    A common pharmacogenomic test is for thiopurine S-methyltransferase (TPMT) status prior to treatment with thiopurine drugs, used to treat auto-immune conditions and pediatric cancer. Guidelines assist practitioners with decisions regarding testing and treatment. The objectives were to conduct a systematic review and critical appraisal of guidance documents with statements regarding TPMT testing and thiopurine dosing. Guidelines, clinical protocols and care pathways from all disciplines were eligible. A quality appraisal was carried out by three appraisers using the Appraisal of Guidelines for Research and Evaluation II. Of the 20 documents found, 5 recommended genotyping while 4 recommended phenotyping. Thirteen documents provided dosing recommendations based on TPMT status. The quality appraisal revealed wide variation across documents. The National Institute for Health and Clinical Excellence and Cincinnati Children's Hospital guidelines demonstrated the highest overall quality with scores of 79 and 76, respectively. Low-scoring documents failed to use systematic methods to develop recommendations or to provide evidence to support recommendations. Guidance documents that included dosing recommendations demonstrated higher quality.

  5. Cell packing structures

    KAUST Repository

    Pottmann, Helmut

    2015-03-03

    This paper is an overview of architectural structures which are either composed of polyhedral cells or closely related to them. We introduce the concept of a support structure of such a polyhedral cell packing. It is formed by planar quads and obtained by connecting corresponding vertices in two combinatorially equivalent meshes whose corresponding edges are coplanar and thus determine planar quads. Since corresponding triangle meshes only yield trivial structures, we focus on support structures associated with quad meshes or hex-dominant meshes. For the quadrilateral case, we provide a short survey of recent research which reveals beautiful relations to discrete differential geometry. Those are essential for successfully initializing numerical optimization schemes for the computation of quad-based support structures. Hex-dominant structures may be designed via Voronoi tessellations, power diagrams, sphere packings and various extensions of these concepts. Apart from the obvious application as load-bearing structures, we illustrate here a new application to shading and indirect lighting. On a higher level, our work emphasizes the interplay between geometry, optimization, statics, and manufacturing, with the overall aim of combining form, function and fabrication into novel integrated design tools.

  6. Hydrodynamics of multi-phase packed bed micro-reactors

    NARCIS (Netherlands)

    Márquez Luzardo, N.M.

    2010-01-01

    Why to use packed bed micro-reactors for catalyst testing? Miniaturized packed bed reactors have a large surface-to-volume ratio at the reactor and particle level that favors the heat- and mass-transfer processes at all scales (intra-particle, inter-phase and inter-particle or reactor level). If the

  7. From Usability Testing to Clinical Simulations: Bringing Context into the Design and Evaluation of Usable and Safe Health Information Technologies

    DEFF Research Database (Denmark)

    Kushniruk, Andre; Nøhr, Christian; Jensen, Sanne

    2013-01-01

    Objectives: The objective of this paper is to explore human factors approaches to understanding the use of health information technology (HIT) by extending usability engineering approaches to include analysis of the impact of clinical context through use of clinical simulations. Methods: Methods...... of clinical context into stronger focus. This involves testing of systems with representative users doing representative tasks, in representative settings/environments. Results: Application of methods where realistic clinical scenarios are used to drive the study of users interacting with systems under...

  8. Safe exclusion of pulmonary embolism using the Wells rule and qualitative D-dimer testing in primary care: prospective cohort study

    Science.gov (United States)

    Erkens, Petra M G; Lucassen, Wim A M; Büller, Harry R; Cate, Hugo ten; Hoes, Arno W; Moons, Karel G M; Prins, Martin H; Oudega, Ruud; van Weert, Henk C P M; Stoffers, Henri E J H

    2012-01-01

    Objective To validate the use of the Wells clinical decision rule combined with a point of care D-dimer test to safely exclude pulmonary embolism in primary care. Design Prospective cohort study. Setting Primary care across three different regions of the Netherlands (Amsterdam, Maastricht, and Utrecht). Participants 598 adults with suspected pulmonary embolism in primary care. Interventions Doctors scored patients according to the seven variables of the Wells rule and carried out a qualitative point of care D-dimer test. All patients were referred to secondary care and diagnosed according to local protocols. Pulmonary embolism was confirmed or refuted on the basis of a composite reference standard, including spiral computed tomography and three months’ follow-up. Main outcome measures Diagnostic accuracy (sensitivity and specificity), proportion of patients at low risk (efficiency), number of missed patients with pulmonary embolism in low risk category (false negative rate), and the presence of symptomatic venous thromboembolism, based on the composite reference standard, including events during the follow-up period of three months. Results Pulmonary embolism was present in 73 patients (prevalence 12.2%). On the basis of a threshold Wells score of ≤4 and a negative qualitative D-dimer test result, 272 of 598 patients were classified as low risk (efficiency 45.5%). Four cases of pulmonary embolism were observed in these 272 patients (false negative rate 1.5%, 95% confidence interval 0.4% to 3.7%). The sensitivity and specificity of this combined diagnostic approach was 94.5% (86.6% to 98.5%) and 51.0% (46.7% to 55.4%), respectively. Conclusion A Wells score of ≤4 combined with a negative qualitative D-dimer test result can safely and efficiently exclude pulmonary embolism in primary care. PMID:23036917

  9. Column-to-column packing variation of disposable pre-packed columns for protein chromatography.

    Science.gov (United States)

    Schweiger, Susanne; Hinterberger, Stephan; Jungbauer, Alois

    2017-12-08

    In the biopharmaceutical industry, pre-packed columns are the standard for process development, but they must be qualified before use in experimental studies to confirm the required performance of the packed bed. Column qualification is commonly done by pulse response experiments and depends highly on the experimental testing conditions. Additionally, the peak analysis method, the variation in the 3D packing structure of the bed, and the measurement precision of the workstation influence the outcome of qualification runs. While a full body of literature on these factors is available for HPLC columns, no comparable studies exist for preparative columns for protein chromatography. We quantified the influence of these parameters for commercially available pre-packed and self-packed columns of disposable and non-disposable design. Pulse response experiments were performed on 105 preparative chromatography columns with volumes of 0.2-20ml. The analyte acetone was studied at six different superficial velocities (30, 60, 100, 150, 250 and 500cm/h). The column-to-column packing variation between disposable pre-packed columns of different diameter-length combinations varied by 10-15%, which was acceptable for the intended use. The column-to-column variation cannot be explained by the packing density, but is interpreted as a difference in particle arrangement in the column. Since it was possible to determine differences in the column-to-column performance, we concluded that the columns were well-packed. The measurement precision of the chromatography workstation was independent of the column volume and was in a range of±0.01ml for the first peak moment and±0.007 ml 2 for the second moment. The measurement precision must be considered for small columns in the range of 2ml or less. The efficiency of disposable pre-packed columns was equal or better than that of self-packed columns. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

  10. Polarizable protein packing

    KAUST Repository

    Ng, Albert H.

    2011-01-24

    To incorporate protein polarization effects within a protein combinatorial optimization framework, we decompose the polarizable force field AMOEBA into low order terms. Including terms up to the third-order provides a fair approximation to the full energy while maintaining tractability. We represent the polarizable packing problem for protein G as a hypergraph and solve for optimal rotamers with the FASTER combinatorial optimization algorithm. These approximate energy models can be improved to high accuracy [root mean square deviation (rmsd) < 1 kJ mol -1] via ridge regression. The resulting trained approximations are used to efficiently identify new, low-energy solutions. The approach is general and should allow combinatorial optimization of other many-body problems. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011 Copyright © 2011 Wiley Periodicals, Inc.

  11. Current nonclinical testing paradigm enables safe entry to First-In-Human clinical trials: The IQ consortium nonclinical to clinical translational database.

    Science.gov (United States)

    Monticello, Thomas M; Jones, Thomas W; Dambach, Donna M; Potter, David M; Bolt, Michael W; Liu, Maggie; Keller, Douglas A; Hart, Timothy K; Kadambi, Vivek J

    2017-11-01

    The contribution of animal testing in drug development has been widely debated and challenged. An industry-wide nonclinical to clinical translational database was created to determine how safety assessments in animal models translate to First-In-Human clinical risk. The blinded database was composed of 182 molecules and contained animal toxicology data coupled with clinical observations from phase I human studies. Animal and clinical data were categorized by organ system and correlations determined. The 2×2 contingency table (true positive, false positive, true negative, false negative) was used for statistical analysis. Sensitivity was 48% with a 43% positive predictive value (PPV). The nonhuman primate had the strongest performance in predicting adverse effects, especially for gastrointestinal and nervous system categories. When the same target organ was identified in both the rodent and nonrodent, the PPV increased. Specificity was 84% with an 86% negative predictive value (NPV). The beagle dog had the strongest performance in predicting an absence of clinical adverse effects. If no target organ toxicity was observed in either test species, the NPV increased. While nonclinical studies can demonstrate great value in the PPV for certain species and organ categories, the NPV was the stronger predictive performance measure across test species and target organs indicating that an absence of toxicity in animal studies strongly predicts a similar outcome in the clinic. These results support the current regulatory paradigm of animal testing in supporting safe entry to clinical trials and provide context for emerging alternate models. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. A Novel State of Charge Estimation Algorithm for Lithium-Ion Battery Packs of Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Zheng Chen

    2016-09-01

    Full Text Available This paper focuses on state of charge (SOC estimation for the battery packs of electric vehicles (EVs. By modeling a battery based on the equivalent circuit model (ECM, the adaptive extended Kalman filter (AEKF method can be applied to estimate the battery cell SOC. By adaptively setting different weighed coefficients, a battery pack SOC estimation algorithm is established based on the single cell estimation. The proposed method can not only precisely estimate the battery pack SOC, but also effectively prevent the battery pack from overcharge and over-discharge, thus providing safe operation. Experiment results verify the feasibility of the proposed algorithm.

  13. Good practice statements on safe laboratory testing: A mixed methods study by the LINNEAUS collaboration on patient safety in primary care.

    Science.gov (United States)

    Bowie, Paul; Forrest, Eleanor; Price, Julie; Verstappen, Wim; Cunningham, David; Halley, Lyn; Grant, Suzanne; Kelly, Moya; Mckay, John

    2015-09-01

    The systems-based management of laboratory test ordering and results handling is a known source of error in primary care settings worldwide. The consequences are wide-ranging for patients (e.g. avoidable harm or poor care experience), general practitioners (e.g. delayed clinical decision making and potential medico-legal implications) and the primary care organization (e.g. increased allocation of resources to problem-solve and dealing with complaints). Guidance is required to assist care teams to minimize associated risks and improve patient safety. To identify, develop and build expert consensus on 'good practice' guidance statements to inform the implementation of safe systems for ordering laboratory tests and managing results in European primary care settings. Mixed methods studies were undertaken in the UK and Ireland, and the findings were triangulated to develop 'good practice' statements. Expert consensus was then sought on the findings at the wider European level via a Delphi group meeting during 2013. We based consensus on 10 safety domains and developed 77 related 'good practice' statements (≥ 80% agreement levels) judged to be essential to creating safety and minimizing risks in laboratory test ordering and subsequent results handling systems in international primary care. Guidance was developed for improving patient safety in this important area of primary care practice. We need to consider how this guidance can be made accessible to frontline care teams, utilized by clinical educators and improvement advisers, implemented by decision makers and evaluated to determine acceptability, feasibility and impacts on patient safety.

  14. Pneumothorax and pneumoperitoneum during the apnea test: how safe is this procedure? Pneumotorax y pneumoperitoneo durante el test de apnea: cuán seguro es este procedimiento?

    Directory of Open Access Journals (Sweden)

    GUSTAVO SAPOSNIK

    2000-09-01

    Full Text Available Apnea test is a crucial requirement for determining the diagnosis of brain death (BD. There are few reports considering clinical complications during this procedure. We describe a major complication during performing the apnea test. We also analyse their practical and legal implications, and review the complications of this procedure in the literature. A 54 year-old man was admitted for impaired consciousness due to a massive intracerebral hemorrhage. Six hours later, he had no motor response, and all brainstem reflexes were negative. The patient fulfilled American Academy of Neurology (AAN criteria for determining BD. During the apnea test, the patient developed pneumothorax, pneumoperitoneum, and finally cardiac arrest. Apnea test is a necessary requirement for the diagnosis of brain death. However, it is not innocuous and caution must be take in particular clinical situations. Complications during the apnea test could be more frequent than reported and may have practical and legal implications. Further prospective studies are necessary to evaluate the frequency and nature of complications during this practice.El test de apnea (AT es un requerimiento esencial para el diagnóstico de muerte encefálica. Hay pocos estudios que consideren complicaciones clínicas relacionadas con este procedimiento. Describimos un paciente que desarrolló una complicación mayor mientras se efectuaba el test de apnea. Realizamos una revisión de las complicaciones relacionadas con este procedimiento en la literatura. CASO CLÍNICO: Un hombre de 54 años fue admitido por deterioro del sensorio debido a una hemorragia intracerebral. Seis horas posteriores, el paciente no tenía respuesta motora, y todos los reflejos del tronco cerebral estaban abolidos. El paciente cumplía con los criterios diagnósticos de Muerte Encefálica de acuerdo a lo establecido por la Academia Americana de Neurología. Durante el test de apnea, el paciente desarrolla s

  15. 'Hope for safe prenatal gene tests'. A content analysis of how the UK press media are reporting advances in non-invasive prenatal testing.

    Science.gov (United States)

    Lewis, Celine; Choudhury, Mahrufa; Chitty, Lyn S

    2015-05-01

    To investigate how non-invasive prenatal testing (NIPT) is portrayed in the UK press media. Content analysis of the ten most widely circulated print/digital news sources in the UK. Seventy-nine articles were identified focusing on NIPT for Down syndrome (n = 67) including single gene disorders (n = 5), whole genome sequencing (n = 8), NIPT technology (n = 2), Rhesus D (n = 1) and fetal sex determination (n = 1). The majority (63%) were in 'serious' papers. Test attributes were frequently cited (100%), in particular that NIPT is a blood test (89%) and avoids risk of miscarriage (56%). The main psychosocial benefit reported was increased time for decision-making (15%). Concerns were discussed less frequently than benefits (39%), with increase in termination rates the main concern raised (23%). The majority of headlines (52%) projected a positive frame towards NIPT. Regarding overall framing of articles, over two thirds (68%) presented benefits and concerns or limitations; however, only a third (35%) were considered 'balanced'. Positive reporting of NIPT in the UK news media reflects the publics' broadly optimistic view towards genomic technology and prenatal testing. Health professionals should be aware that women may have incomplete information or misunderstandings about NIPT. Pre-test counselling to ensure informed decision-making is therefore important. © 2014 John Wiley & Sons, Ltd.

  16. FROM THE PACKED TOWERS

    Directory of Open Access Journals (Sweden)

    Valderi D. Leite

    2013-01-01

    Full Text Available About 245 thousand tones of municipal solid w aste are collected daily in Brazil. Nearly 32 thousand tones of the collected amount are treated in sanitary landfill, which generates biogas and leachate as byproduct. The leachate resulting from sanitary landfill contains high concentration of carbonaceous and nitrogenized material. The crucial question is that the biodegradation of the carbonaceous material is difficult as long as the nitrogenized material is presen t in the form of ammoniacal nitrogen (NH 4 + , which compromises performance of biological tr eatment process. Therefore, a physical and chemical treatment of the leachate should be done before its biological treatment, especially for reduction of ammoniacal nitr ogen concentration and for propitiating the realization of application of biological treatment. The treatment of leachate requires specific consideration, which is not needed fo r other types of waste. In the specific case in this study, where ammoniacal nitrogen concentration was about 2,200 mgN L -1 and the BOD 5 /COD ratio was 0.3, the study of ammonia stripping process was performed. Ammonia stripping process was studied in pack ed towers of 35 L capacity each and the parameters investigated were pH, ratio of contact area/leach volume and the aeration time. One of the parameters that influenced most in efficiency of ammonia stripping process was pH of the leachate since it contributes in conversion of ammoniacal nitrogen from NH 4 + to NH 3 .

  17. Ice pack heat sink subsystem - phase 1, volume 2

    Science.gov (United States)

    Roebelen, G. J., Jr.

    1973-01-01

    The design, development, and test of a functional laboratory model ice pack heat sink subsystem are discussed. Operating instructions to include mechanical and electrical schematics, maintenance instructions, and equipment specifications are presented.

  18. Domain Discretization and Circle Packings

    DEFF Research Database (Denmark)

    Dias, Kealey

    , and the edges are geodesic segments (Euclidean, hyperbolic, or spherical) connecting centers of circles that are tangent to each other. Three circles that are mutually tangent form a face of the triangulation. Since circle packing is closely related to triangulation, circle packing methods can be applied...... to domain discretization problems such as triangulation and unstructured mesh generation techniques. We wish to ask ourselves the question: given a cloud of points in the plane (we restrict ourselves to planar domains), is it possible to construct a circle packing preserving the positions of the vertices...

  19. Charging and discharging tests for obtaining an accurate dynamic electro-thermal model of high power lithium-ion pack system for hybrid and EV applications

    DEFF Research Database (Denmark)

    Mihet-Popa, Lucian; Camacho, Oscar Mauricio Forero; Nørgård, Per Bromand

    2013-01-01

    circuit model, based on the runtime battery model and the Thevenin circuit model, with parameters obtained from the tests and depending on SOC, current and temperature has been implemented in MATLAB/Simulink and Power Factory. A good alignment between simulations and measurements has been found....

  20. The pursuit of perfect packing

    CERN Document Server

    Weaire, Denis

    2008-01-01

    Coauthored by one of the creators of the most efficient space packing solution, the Weaire-Phelan structure, The Pursuit of Perfect Packing, Second Edition explores a problem of importance in physics, mathematics, chemistry, biology, and engineering: the packing of structures. Maintaining its mathematical core, this edition continues and revises some of the stories from its predecessor while adding several new examples and applications. The book focuses on both scientific and everyday problems ranging from atoms to honeycombs. It describes packing models, such as the Kepler conjecture, Voronoï decomposition, and Delaunay decomposition, as well as actual structure models, such as the Kelvin cell and the Weaire-Phelan structure. The authors discuss numerous historical aspects and provide biographical details on influential contributors to the field, including emails from Thomas Hales and Ken Brakke. With examples from physics, crystallography, engineering, and biology, this accessible and whimsical bo...

  1. Identifying counterfeit cigarette packs using ultraviolet irradiation and light microscopy.

    Science.gov (United States)

    Kurti, Marin; He, Yi; von Lampe, Klaus; Li, Yanlei

    2017-01-01

    Develop a method that yields high rates of sensitivity and specificity for determination of counterfeit cigarette packs for three popular brands: Newport, Marlboro ('Red') and Marlboro Gold. Using systematic keyword searches, we identified industry documents from the University of California, San Francisco's Legacy Tobacco Documents Library that describe the use of ultraviolet (UV) irradiation and close examination of printing quality to distinguish between counterfeit and genuine cigarette packs. Guided by these documents, we identified six markers for counterfeit cigarettes across three popular brands using counterfeit cigarette packs (N=68) seized by law enforcement agencies in the USA. We assessed the diagnostic test accuracy of these markers and tested it against genuine packs (N=22) using receiver operating characteristic curves analysis. We find that counterfeit cigarette packs fluoresce to long-wave UV irradiation and display poor printing quality. The optimal cut-off value varies among the three brands. For example, counterfeit Newport and Marlboro packaging can be reliably classified with two of six characteristics, while Marlboro Gold requires four. Researchers who conduct littered pack and pack swap studies are urged to include this method to assess the share of counterfeit cigarettes, and compare the result against tobacco industry figures. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  2. cellPACK: a virtual mesoscope to model and visualize structural systems biology.

    Science.gov (United States)

    Johnson, Graham T; Autin, Ludovic; Al-Alusi, Mostafa; Goodsell, David S; Sanner, Michel F; Olson, Arthur J

    2015-01-01

    cellPACK assembles computational models of the biological mesoscale, an intermediate scale (10-100 nm) between molecular and cellular biology scales. cellPACK's modular architecture unites existing and novel packing algorithms to generate, visualize and analyze comprehensive three-dimensional models of complex biological environments that integrate data from multiple experimental systems biology and structural biology sources. cellPACK is available as open-source code, with tools for validation of models and with 'recipes' and models for five biological systems: blood plasma, cytoplasm, synaptic vesicles, HIV and a mycoplasma cell. We have applied cellPACK to model distributions of HIV envelope protein to test several hypotheses for consistency with experimental observations. Biologists, educators and outreach specialists can interact with cellPACK models, develop new recipes and perform packing experiments through scripting and graphical user interfaces at http://cellPACK.org/.

  3. Using intervention mapping for the development of a targeted secure web-based outreach strategy named SafeFriend, for Chlamydia trachomatis testing in young people at risk.

    Science.gov (United States)

    Theunissen, Kevin A T M; Hoebe, Christian J P A; Crutzen, Rik; Kara-Zaïtri, Chakib; de Vries, Nanne K; van Bergen, Jan E A M; van der Sande, Marianne A B; Dukers-Muijrers, Nicole H T M

    2013-10-22

    Many young people at high risk for Chlamydia trachomatis (Ct) are not reached by current sexual health care systems, such as general practitioners and public sexual health care centres (sexually transmitted infection clinics).Ct is the most frequently diagnosed bacterial sexually transmitted infection (STI) among sexually active people and in particular young heterosexuals. Innovative screening strategies are needed to interrupt the transmission of Ct among young people and connect the hidden cases to care. Intervention Mapping (IM), a systematic approach to develop theory- and evidence-based interventions, was used to develop a strategy to target Ct testing towards young people who are currently hidden to care in The Netherlands. Both clinical users (i.e. sexual health care nurses) and public users (i.e., young people at risk for Ct) were closely involved in the IM process. A needs assessment study was carried out using semi-structured interviews among users (N = 21), a literature search and by taking lessons learned from existing screening programmes. Theoretical methods and practical applications to reach high risk young people and influence testing were selected and translated into specific programme components. The IM approach resulted in the development of a secure and web-based outreach Ct screening strategy, named SafeFriend. It is developed to target groups of high-risk young people who are currently hidden to care. Key methods include web-based Respondent Driven Sampling, starting from young Ct positive sexual health care centre clients, to reach and motivate peers (i.e., sex partners and friends) to get tested for Ct. Testing and the motivation of peers were proposed as the desired behavioural outcomes and the Precaution Adoption Process Model was chosen as theoretical framework. End users, i.e., young people and sexual health care nurses were interviewed and included in the development process to increase the success of implementation. IM proved useful

  4. Removal of nitrate, ammonia and phosphate from aqueous solutions in packed bed filter using biochar augmented sand media

    National Research Council Canada - National Science Library

    Ali El Hanandeh; Aswin Bhuvaneswaran; Philiphi de Rozari

    2017-01-01

    .... Therefore, wastewater must be treated to meet safe levels of discharge. In this study, laboratory investigation of the efficiency of packed bed filters to remove nitrate, ammonium and phosphate from aqueous solutions were conducted...

  5. HETP evaluation of structured packing distillation column

    Directory of Open Access Journals (Sweden)

    A. E. Orlando Jr.

    2009-09-01

    Full Text Available Several tests with a hydrocarbon mixture of known composition (C8-C14, obtained from DETEN Chemistry S.A., have been performed in a laboratory distillation column, having 40mm of nominal diameter and 2.2m high, with internals of Sulzer DX gauze stainless steel structured packing. The main purpose of this work was to evaluate HETP of a structured packing laboratory scale distillation column, operating continuously. Six HETP correlations available in the literature were compared in order to find out which is the most appropriate for structured packing columns working with medium distillates. Prior to the experimental tests, simulation studies using commercial software PRO/II® were performed in order to establish the optimum operational conditions for the distillation, especially concerning operating pressure, top and bottom temperatures, feed location and reflux ratio. The results of PRO/II® were very similar to the analysis of the products obtained during continuous operation, therefore permitting the use of the properties calculated by that software on the theoretical models investigated. The theoretical models chosen for HETP evaluation were: Bravo, Rocha and Fair (1985; Rocha, Bravo and Fair (1993, 1996; Brunazzi and Pagliant (1997; Carlo, Olujić and Pagliant (2006; Olujić et al., (2004. Modifications concerning calculation of specific areas were performed on the correlations in order to fit them for gauze packing HETP evaluation. As the laboratory distillation column was operated continuously, different HETP values were found by the models investigated for each section of the column. The low liquid flow rates in the top section of the column are a source of error for HETP evaluation by the models; therefore, more reliable HETP values were found in the bottom section, in which liquid flow rates were much greater. Among the theoretical models, Olujić et al. (2004 has shown good results relative to the experimental tests. In addition, the

  6. HIL Development and Validation of Lithium-ion Battery Packs (SAE 2014-01-1863)

    Science.gov (United States)

    A Battery Test Facility (BTF) has been constructed at United States Environmental Protection Agency (EPA) to test various automotive battery packs for HEV, PHEV, and EV vehicles. Battery pack tests were performed in the BTF using a battery cycler, testing controllers, battery pa...

  7. Deterministic indexing for packed strings

    DEFF Research Database (Denmark)

    Bille, Philip; Gørtz, Inge Li; Skjoldjensen, Frederik Rye

    2017-01-01

    Given a string S of length n, the classic string indexing problem is to preprocess S into a compact data structure that supports efficient subsequent pattern queries. In the deterministic variant the goal is to solve the string indexing problem without any randomization (at preprocessing time...... or query time). In the packed variant the strings are stored with several character in a single word, giving us the opportunity to read multiple characters simultaneously. Our main result is a new string index in the deterministic and packed setting. Given a packed string S of length n over an alphabet σ......, we show how to preprocess S in O(n) (deterministic) time and space O(n) such that given a packed pattern string of length m we can support queries in (deterministic) time O (m/α + log m + log log σ), where α = w/log σ is the number of characters packed in a word of size w = θ(log n). Our query time...

  8. Malaria rapid testing by community health workers is effective and safe for targeting malaria treatment: randomised cross-over trial in Tanzania.

    Directory of Open Access Journals (Sweden)

    Marycelina Mubi

    Full Text Available Early diagnosis and prompt, effective treatment of uncomplicated malaria is critical to prevent severe disease, death and malaria transmission. We assessed the impact of rapid malaria diagnostic tests (RDTs by community health workers (CHWs on provision of artemisinin-based combination therapy (ACT and health outcome in fever patients.Twenty-two CHWs from five villages in Kibaha District, a high-malaria transmission area in Coast Region, Tanzania, were trained to manage uncomplicated malaria using RDT aided diagnosis or clinical diagnosis (CD only. Each CHW was randomly assigned to use either RDT or CD the first week and thereafter alternating weekly. Primary outcome was provision of ACT and main secondary outcomes were referral rates and health status by days 3 and 7. The CHWs enrolled 2930 fever patients during five months of whom 1988 (67.8% presented within 24 hours of fever onset. ACT was provided to 775 of 1457 (53.2% patients during RDT weeks and to 1422 of 1473 (96.5% patients during CD weeks (Odds Ratio (OR 0.039, 95% CI 0.029-0.053. The CHWs adhered to the RDT results in 1411 of 1457 (96.8%, 95% CI 95.8-97.6 patients. More patients were referred on inclusion day during RDT weeks (10.0% compared to CD weeks (1.6%. Referral during days 1-7 and perceived non-recovery on days 3 and 7 were also more common after RDT aided diagnosis. However, no fatal or severe malaria occurred among 682 patients in the RDT group who were not treated with ACT, supporting the safety of withholding ACT to RDT negative patients.RDTs in the hands of CHWs may safely improve early and well-targeted ACT treatment in malaria patients at community level in Africa.ClinicalTrials.gov NCT00301015.

  9. Sleeping distance in wild wolf packs

    Science.gov (United States)

    Knick, S.T.; Mech, L.D.

    1980-01-01

    Sleeping distances were observed among members of 13 wild wolf (Canis lupus) packs and 11 pairs in northeastern Minnesota to determine if the distances correlated with pack size and composition. The study utilized aerial radio-tracking and observation during winter. Pack size and number of adults per pack were inversely related to pack average sleeping distance and variability. No correlation between sleeping distance and microclimate was observed. Possible relationships between social bonding and our results are discussed.

  10. Spatial distribution and packing of xylem conduits.

    Science.gov (United States)

    Martínez-Vilalta, Jordi; Mencuccini, Maurizio; Alvarez, Xavier; Camacho, Juan; Loepfe, Lasse; Piñol, Josep

    2012-07-01

    The hydraulic properties of the xylem determine the ability of plants to transport water from the soil to the leaves and to cope with important stress factors such as frost and drought. Hydraulic properties have usually been studied as a function of the anatomy of xylem conduits and their pits, but recent studies have proposed that system-level properties, related to the topology of the xylem network, may also play a role. Here we study how the spatial arrangement of conduits in xylem cross sections affects the relationship between mean conduit lumen area and conduit density (packing function) across species. Point pattern analysis was used to describe the spatial distribution of xylem conduits in 97 woody species. The effect of conduit aggregation on the packing function was tested using phylogenetic generalized least squares. A hydraulic model with an explicit description of the topology of the xylem network was used to interpret the functional significance of our findings. The spatial arrangement of conduits affected the packing function across species, so that species with aggregated distributions tended to have lower conduit densities for a given conduit size and lower conduit lumen fractions. According to our modeling results, the higher conduit-to-conduit connectivity of species with aggregated distributions allows them to achieve higher hydraulic conductivity. Species with aggregated conduits, however, pay a cost in terms of increased vulnerability to embolism. The spatial arrangement of conduits affects the fundamental structural and functional attributes of the xylem.

  11. Food packing optimization

    Science.gov (United States)

    The development of a universal closure lid for the space shuttle food package is reported. The revised lid needs a folded configuration which, when unfolded, fully conforms to the interior surfaces of the food cup. Experimental thermoform molds were fabricated and test lids formed. The lid material not in contact with the food conformed to the cup interior without wrinkles, permitting full nesting of the cups. The final lid design was established and thermoform tooling designed and fabricated. Lids formed on these molds were tested for strength. The heating elements were replaced and repositioned to eliminate any hot spots which may cause warpage.

  12. The pursuit of perfect packing

    CERN Document Server

    Weaire, Denis

    2000-01-01

    In 1998 Thomas Hales dramatically announced the solution of a problem that has long teased eminent mathematicians: what is the densest possible arrangement of identical spheres? The Pursuit of Perfect Packing recounts the story of this problem and many others that have to do with packing things together. The examples are taken from mathematics, physics, biology, and engineering, including the arrangement of soap bubbles in foam, atoms in a crystal, the architecture of the bee''s honeycomb, and the structure of the Giant''s Causeway. Using an informal style and with key references, the book also includes brief accounts of the lives of many of the scientists who devoted themselves to problems of packing over many centuries, together with wry comments on their efforts. It is an entertaining introduction to the field for both specialists and the more general public.

  13. Ice pack heat sink subsystem - Phase 1, Volume 1

    Science.gov (United States)

    Roebelen, G. J., Jr.

    1973-01-01

    The design, development, fabrication, and test at one-g of a functional laboratory model (non-flight) ice pack heat sink subsystem to be used eventually for astronaut cooling during manned space missions are discussed. In normal use, excess heat in the liquid cooling garment (LCG) coolant is transferred to a reusable/regenerable ice pack heat sink. For emergency operation, or for extension of extravehicular activity mission time after all the ice has melted, water from the ice pack is boiled to vacuum, thereby continuing to remove heat from the LCG coolant. This subsystem incorporates a quick connect/disconnect thermal interface between the ice pack heat sink and the subsystem heat exchanger.

  14. Packing element of a packer

    Energy Technology Data Exchange (ETDEWEB)

    Safin, V.A.

    1982-01-01

    The packing element of a packer is proposed which consists of an elastic core and outer layer made of plastic sealing material. It is distinguished by the fact that in order to facilitate removal of the packing element from the site of installation, the outer layer has a sublayer made of polymer material which is chemically inactive in relationship to the material of the core, for example polytetrafluoroethylene. The element is also distinguished by the fact that the outer layer together with the sublayer is attached to the core through a nonhardening and nondrying glue composition, for example, based on rubber, rosin, lanolin, vaseline oil and zinc oxide.

  15. Cylinder valve packing nut studies

    Energy Technology Data Exchange (ETDEWEB)

    Blue, S.C. [Martin Marietta Energy Systems, Inc., Paducah, KY (United States)

    1991-12-31

    The design, manufacture, and use of cylinder valve packing nuts have been studied to improve their resistance to failure from stress corrosion cracking. Stress frozen photoelastic models have been analyzed to measure the stress concentrations at observed points of failure. The load effects induced by assembly torque and thermal expansion of stem packing were observed by strain gaging nuts. The effects of finishing operations and heat treatment were studied by the strain gage hole boring and X-ray methods. Modifications of manufacturing and operation practices are reducing the frequency of stress corrosion failures.

  16. Design and Production of Damage-Resistant Tray Pack Containers

    Science.gov (United States)

    1985-07-01

    Nutrition Technology, Task area BC-Food Packaging, AMAFN 81-20(V). The contract Project Officer was Joseph TW. Szczeblowski. Because the Tray Packs are...BOX #6 DATE% 6-18-85 TEST TYPE: SIDE DROP TEST SAMPLE CONFIGURATION: 98# LABELED LID -REINFORCED TEST TECH: 2X2 - AKN 98#/.050 REINFORCED TRAY -WATER

  17. Development of cooling strategy for an air cooled lithium-ion battery pack

    Science.gov (United States)

    Sun, Hongguang; Dixon, Regan

    2014-12-01

    This paper describes a cooling strategy development method for an air cooled battery pack with lithium-ion pouch cells used in a hybrid electric vehicle (HEV). The challenges associated with the temperature uniformity across the battery pack, the temperature uniformity within each individual lithium-ion pouch cell, and the cooling efficiency of the battery pack are addressed. Initially, a three-dimensional battery pack thermal model developed based on simplified electrode theory is correlated to physical test data. An analytical design of experiments (DOE) approach using Optimal Latin-hypercube technique is then developed by incorporating a DOE design model, the correlated battery pack thermal model, and a morphing model. Analytical DOE studies are performed to examine the effects of cooling strategies including geometries of the cooling duct, cooling channel, cooling plate, and corrugation on battery pack thermal behavior and to identify the design concept of an air cooled battery pack to maximize its durability and its driving range.

  18. SAFE Journal. Volume 35, Number 1, Spring 2007

    Science.gov (United States)

    2007-01-01

    polymorphism have been seen in a number of materials such as CL-20 or HMX . Impact data was determined using a ball drop method developed at SAFE...various forms of KDNP are likely due to polymorphism which allows for variations in molecular conformation and crystal cell packing. High resolution

  19. Towards optimal packed string matching

    DEFF Research Database (Denmark)

    Ben-Kiki, Oren; Bille, Philip; Breslauer, Dany

    2014-01-01

    -size string-matching instruction wssm is available in contemporary commodity processors. The other word-size maximum-suffix instruction wslm is only required during the pattern pre-processing. Benchmarks show that our solution can be efficiently implemented, unlike some prior theoretical packed string...

  20. Heuristics for Multidimensional Packing Problems

    DEFF Research Database (Denmark)

    Egeblad, Jens

    for a three-dimensional knapsack packing problem involving furniture is presented in the fourth paper. The heuristic is based on a variety of techniques including tree-search, wall-building, and sequential placement. The solution process includes considerations regarding stability and load bearing strength...

  1. Pack cementation coatings for alloys

    Energy Technology Data Exchange (ETDEWEB)

    He, Yi-Rong; Zheng, Minhui; Rapp, R.A. [Ohio State Univ., Columbus, OH (United States)

    1996-08-01

    The halide-activated pack cementation process was modified to produce a Ge-doped silicide diffusion coating on a Cr-Cr{sub 2}Nb alloy in a single processing step. The morphology and composition of the coating depended both on the composition of the pack and on the composition and microstructure of the substrate. Higher Ge content in the pack suppressed the formation of CrSi{sub 2} and reduced the growth kinetics of the coating. Ge was not homogeneously distributed in the coatings. In cyclic and isothermal oxidation in air at 700 and 1050{degrees}C, the Ge-doped silicide coating protected the Cr-Nb alloys from significant oxidation by the formation of a Ge-doped silica film. The codeposition and diffusion of aluminum and chromium into low alloy steel have been achieved using elemental Al and Cr powders and a two-step pack cementation process. Sequential process treatments at 925{degrees}C and 1150{degrees}C yield dense and uniform ferrite coatings, whose compositions are close to either Fe{sub 3}Al or else FeAl plus a lower Cr content, when processed under different conditions. The higher content of Al in the coatings was predicted by thermodynamic calculations of equilibrium in the gas phase. The effect of the particle size of the metal powders on the surface composition of the coating has been studied for various combinations of Al and Cr powders.

  2. How Safe Are Kid-Safe Search Engines?

    Science.gov (United States)

    Masterson-Krum, Hope

    2001-01-01

    Examines search tools available to elementary and secondary school students, both human-compiled and crawler-based, to help direct them to age-appropriate Web sites; analyzes the procedures of search engines labeled family-friendly or kid safe that use filters; and tests the effectiveness of these services to students in school libraries. (LRW)

  3. Packing the PLSS

    Science.gov (United States)

    Jennings, Mallory

    2011-01-01

    few of the components that encompass the PLSS. Each component has a weight and a certain volume that the NASA Engineers must take into account when building the PLSS, because the weight and volumes affect the crewmembers center of gravity (CG). [See the Notes Section for the link to an Apollo video that demonstrates the issues some of the crewmembers had picking up tools and dealing with center of gravity/tools on the surface of the Moon.] In this activity, students will simulate engineering design techniques that NASA Engineers and Designers are currently implementing to configuring the components within the PLSS. Through testing, students will consider the comfort, mobility, and center of gravity for their test subjects and how that changes after adjusting the placement of their simulated PLSS components.

  4. Adaptive state of charge estimator for lithium-ion cells series battery pack in electric vehicles

    Science.gov (United States)

    Xiong, Rui; Sun, Fengchun; Gong, Xianzhi; He, Hongwen

    2013-11-01

    Due to cell-to-cell variations in battery pack, it is hard to model the behavior of the battery pack accurately; as a result, accurate State of Charge (SoC) estimation of battery pack remains very challenging and problematic. This paper tries to put effort on estimating the SoC of cells series lithium-ion battery pack for electric vehicles with adaptive data-driven based SoC estimator. First, a lumped parameter equivalent circuit model is developed. Second, to avoid the drawbacks of cell-to-cell variations in battery pack, a filtering approach for ensuring the performance of capacity/resistance conformity in battery pack has been proposed. The multi-cells “pack model” can be simplified by the unit model. Third, the adaptive extended Kalman filter algorithm has been used to achieve accurate SoC estimates for battery packs. Last, to analyze the robustness and the reliability of the proposed approach for cells and battery pack, the federal urban driving schedule and dynamic stress test have been conducted respectively. The results indicate that the proposed approach not only ensures higher voltage and SoC estimation accuracy for cells, but also achieves desirable prediction precision for battery pack, both the pack's voltage and SoC estimation error are less than 2%.

  5. A Geometric-Structure Theory for Maximally Random Jammed Packings.

    Science.gov (United States)

    Tian, Jianxiang; Xu, Yaopengxiao; Jiao, Yang; Torquato, Salvatore

    2015-11-16

    Maximally random jammed (MRJ) particle packings can be viewed as prototypical glasses in that they are maximally disordered while simultaneously being mechanically rigid. The prediction of the MRJ packing density ϕMRJ, among other packing properties of frictionless particles, still poses many theoretical challenges, even for congruent spheres or disks. Using the geometric-structure approach, we derive for the first time a highly accurate formula for MRJ densities for a very wide class of two-dimensional frictionless packings, namely, binary convex superdisks, with shapes that continuously interpolate between circles and squares. By incorporating specific attributes of MRJ states and a novel organizing principle, our formula yields predictions of ϕMRJ that are in excellent agreement with corresponding computer-simulation estimates in almost the entire α-x plane with semi-axis ratio α and small-particle relative number concentration x. Importantly, in the monodisperse circle limit, the predicted ϕMRJ = 0.834 agrees very well with the very recently numerically discovered MRJ density of 0.827, which distinguishes it from high-density "random-close packing" polycrystalline states and hence provides a stringent test on the theory. Similarly, for non-circular monodisperse superdisks, we predict MRJ states with densities that are appreciably smaller than is conventionally thought to be achievable by standard packing protocols.

  6. Safe havens in Europe

    DEFF Research Database (Denmark)

    Paldam, Martin

    2013-01-01

    Eleven safe havens exist in Europe providing offshore banking and low taxes. Ten of these states are very small while Switzerland is moderately small. All 11 countries are richer than their large neighbors. It is shown that causality is from small to safe haven to wealth, and that theoretically...... equilibriums are likely to exist where a certain regulation is substantially lower in a small country than in its big neighbor. This generates a large capital inflow to the safe havens. The pool of funds that may reach the safe havens is shown to be huge. It is far in excess of the absorptive capacity...... of the safe havens, but it still explains, why they are rich. Microstates offer a veil of anonymity to funds passing through, and Switzerland offers safe storage of funds....

  7. Building nursing intellectual capital for safe use of information technology: a before-after study to test an evidence-based peer coach intervention.

    Science.gov (United States)

    Poe, Stephanie S; Abbott, Patricia; Pronovost, Peter

    2011-01-01

    Use of peer coaches may be effective in building and maintaining competencies bedside nurses need to safely use electronic health records (EHRs). A nonexperimental design with before-after measures was used to evaluate the effectiveness of peer coaches in increasing learner satisfaction and confidence in EHR use on 9 units at an academic medical center. Survey findings suggested that nurses experienced higher than expected satisfaction with training and increased self-confidence in the EHR use following program implementation.

  8. Random packing of colloids and granular matter

    NARCIS (Netherlands)

    Wouterse, A.

    2008-01-01

    This thesis deals with the random packing of colloids and granular matter. A random packing is a stable disordered collection of touching particles, without long-range positional and orientational order. Experimental random packings of particles with the same shape but made of different materials

  9. Two-Dimensional Bin Packing Problems

    NARCIS (Netherlands)

    Lodi, Andrea; Martello, Silvano; Monaci, Michele; Vigo, Daniele

    2014-01-01

    An important variant of two-dimensional bin packing problem (2BP), which is also used in some approximation algorithms for its solution, is the strip packing problem (2SP), in which the items have to be packed in a strip of width W and infinite height, so as to minimize the height at which the strip

  10. Significance and technology of coal mine packing

    Science.gov (United States)

    Wang, Yunliang

    2017-08-01

    Packing is a kind of mining method which is used to fill the goaf with filling material to control the movement of overlying strata and reduce the deformation of the surface. This paper mainly discusses the significance of coal mine packing, and introduces the current method of filling and mining. Finally, the future of coal mine packing is forecasted.

  11. Reorganisatie van ondernemingen en pre-pack

    NARCIS (Netherlands)

    Verstijlen, Frank

    2014-01-01

    Het preadvies behandelt de opmars en wenselijkheid van de pre-pack, het verloop van de pre-pack en de positie van de onderscheidene betrokkenen bij de pre-pack, naar geldend recht en volgens (het voorontwerp voor) de Wet Continuïteit Ondernemingen I.

  12. Complications of balloon packing in epistaxis

    NARCIS (Netherlands)

    Vermeeren, Lenka; Derks, Wynia; Fokkens, Wytske; Menger, Dirk Jan|info:eu-repo/dai/nl/396566170

    2015-01-01

    Although balloon packing appears to be efficient to control epistaxis, severe local complications can occur. We describe four patients with local lesions after balloon packing. Prolonged balloon packing can cause damage to nasal mucosa, septum and alar skin (nasal mucosa, the cartilaginous skeleton

  13. A New Process for the Acceleration Test and Evaluation of Aeromedical Equipment for U.S. Air Force Safe-To-Fly Certification

    Science.gov (United States)

    2010-10-01

    To test this theory , the ATB employed FEA for testing various AE structures to meet the acceleration requirements and found some aspects of this...equipment and successfully introducing the use of the Equivalent Load Testing ( ELT ) method, which permits the use of alternative testing approaches...Data Conduct Acceleration Test Selection Meeting Acceleration Test Type Decision Determine Tasks for Component Level Tests ( ELT Method) Analyze

  14. Asymptotically Safe Dark Matter

    DEFF Research Database (Denmark)

    Sannino, Francesco; Shoemaker, Ian M.

    2015-01-01

    We introduce a new paradigm for dark matter (DM) interactions in which the interaction strength is asymptotically safe. In models of this type, the coupling strength is small at low energies but increases at higher energies, and asymptotically approaches a finite constant value. The resulting...... searches are the primary ways to constrain or discover asymptotically safe dark matter....

  15. Packing material formulation for odorous emission biofiltration.

    Science.gov (United States)

    Gaudin, François; Andres, Yves; Le Cloirec, Pierre

    2008-01-01

    In biological gas treatment, like biofiltration of volatile organic compounds or odorous substances, the microbial nutritional needs could be a key factor of the process. The aim of this work is to propose a new packing material able to provide the lacking nutrients. In the first part of this study, two kinds of material composed of calcium carbonate, an organic binder and two different nitrogen sources, ammonium phosphate and urea phosphate (UP), were compared. The new supports present bulk densities between 0.88 and 1.15g cm(-3), moisture retention capacities close to 50% and 70%, and water cohesion capacities greater than six months for the material with 20% binder. In the second part, oxygen consumption measurements in liquid experiments show that these packing materials could enhance bacterial growth compared to pine bark or pozzolan and have no inhibitory effect. The biodegradation of different substrates (sodium sulfide and ammonia) and the support colonization by the biomass were evaluated. Finally, UP 20 was chosen and tested in a hydrogen sulfide or ammoniac biofiltration process. This showed that, for H2S concentrations greater than 100mg m(-3), UP 20 has a real advantage over pine bark or pozzolan.

  16. Modeling a Packed Bed Reactor Utilizing the Sabatier Process

    Science.gov (United States)

    Shah, Malay G.; Meier, Anne J.; Hintze, Paul E.

    2017-01-01

    A numerical model is being developed using Python which characterizes the conversion and temperature profiles of a packed bed reactor (PBR) that utilizes the Sabatier process; the reaction produces methane and water from carbon dioxide and hydrogen. While the specific kinetics of the Sabatier reaction on the RuAl2O3 catalyst pellets are unknown, an empirical reaction rate equation1 is used for the overall reaction. As this reaction is highly exothermic, proper thermal control is of the utmost importance to ensure maximum conversion and to avoid reactor runaway. It is therefore necessary to determine what wall temperature profile will ensure safe and efficient operation of the reactor. This wall temperature will be maintained by active thermal controls on the outer surface of the reactor. Two cylindrical PBRs are currently being tested experimentally and will be used for validation of the Python model. They are similar in design except one of them is larger and incorporates a preheat loop by feeding the reactant gas through a pipe along the center of the catalyst bed. The further complexity of adding a preheat pipe to the model to mimic the larger reactor is yet to be implemented and validated; preliminary validation is done using the smaller PBR with no reactant preheating. When mapping experimental values of the wall temperature from the smaller PBR into the Python model, a good approximation of the total conversion and temperature profile has been achieved. A separate CFD model incorporates more complex three-dimensional effects by including the solid catalyst pellets within the domain. The goal is to improve the Python model to the point where the results of other reactor geometry can be reasonably predicted relatively quickly when compared to the much more computationally expensive CFD approach. Once a reactor size is narrowed down using the Python approach, CFD will be used to generate a more thorough prediction of the reactors performance.

  17. Provision of medical abortion by midlevel healthcare providers in Kyrgyzstan: testing an intervention to expand safe abortion services to underserved rural and periurban areas.

    Science.gov (United States)

    Johnson, Brooke Ronald; Maksutova, Elmira; Boobekova, Aigul; Davletova, Ainura; Kazakbaeva, Chinara; Kondrateva, Yelena; Landoulsi, Sihem; Lazdane, Gunta; Monolbaev, Kubanychbek; Seuc Jo, Armando H

    2017-11-10

    To demonstrate the feasibility and safety of training midlevel healthcare providers (midwives and family nurses) to provide medical abortion and postabortion contraception in underserved areas in Kyrgyzstan. This was an implementation study at four referral facilities and 28 Felsher Obstetric Points in two districts to train their midwives and family nurses to deliver safe and effective abortion care with co-packaged mifepristone-misoprostol and provide contraceptives postabortion. The outcome of abortion - complete abortion, incomplete abortion or o-going pregnancy - was the primary end point measured. An international consultant trained 18 midwives and 14 family nurses (with midwifery diplomas) to provide medical abortion care. Supervising gynecologists based in the referral centers and study investigators based in Bishkek provided monthly monitoring of services and collection of patient management forms. A voluntary self-administered questionnaire at the follow-up visit documented women's acceptability of medical abortion services. All study data were cross-checked and entered into an online data management system for descriptive analysis. Between August 2014 and September 2015, midwives provided medical abortion to 554 women with a complete abortion rate of 97.8%, of whom 62% chose to use misoprostol at home. No women were lost to follow-up. Nearly all women (99.5%) chose a contraceptive method postabortion; 61% of women receiving services completed the acceptability form, of whom more than 99% indicated a high level of satisfaction with the service and would recommend it to a friend. This study demonstrates that trained Kyrgyz midwives and nurses can provide medical abortion safely and effectively. This locally generated evidence can be used by the Kyrgyz Ministry of Health to reduce unintended pregnancy and expand safe abortion care to women in underserved periurban and rural settings. Success in scaling up midwife/nurse provision of medical abortion in

  18. Growth of Vanadium Carbide by Halide-Activated Pack Diffusion

    DEFF Research Database (Denmark)

    Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin; Dahl, Kristian Vinter

    The present work investigates growth of vanadium carbide (VC) layers by the pack diffusion method on a Vanadis 6 tool steel. The VC layers were produced by pack diffusion at 1000°C for 1, 4 and 16 hours. The VC layers were characterized with optical and electron microscopy, Vickers hardness tests...... and X-ray diffraction. Homogeneous VC mono-phase layers with Vickers hardness of more than 2400 HV were obtained. Hardening and tempering of the vanadized Vanadis 6 steel did not affect the VC layers....

  19. Safe Streets in Tacoma.

    Science.gov (United States)

    Nebgen, Mary

    1990-01-01

    In Tacoma, Washington, the Safe Street Campaign united the schools, government agencies, labor groups, community and religious organizations, businesses, youth, and substance abuse agencies in responding to gangs and drugs. (MLF)

  20. Karate: Keep It Safe.

    Science.gov (United States)

    Jordan, David

    1981-01-01

    Safety guidelines for each phase of a karate practice session are presented to provide an accident-free and safe environment for teaching karate in a physical education or traditional karate training program. (JMF)

  1. Safe Sleep for Babies

    Science.gov (United States)

    ... serve mothers and babies to deliver culturally appropriate messaging about safe sleep for babies. Monitoring and evaluating ... RSS ABOUT About CDC Jobs Funding LEGAL Policies Privacy FOIA No Fear Act OIG 1600 Clifton Road ...

  2. The first safe country

    Directory of Open Access Journals (Sweden)

    Raffaela Puggioni

    2012-06-01

    Full Text Available The Dublin II Regulation makes the first safe country of refuge solelyresponsible for refugees and asylum seekers. In the case of Italy, thefirst responsible country has not been acting responsibly.

  3. Vitamins, Are They Safe?

    OpenAIRE

    Hadi Hamishehkar; Farhad Ranjdoost; Parina Asgharian; Ata Mahmoodpoor; Sarvin Sanaie

    2016-01-01

    The consumption of a daily multivitamin among people all over the world is dramatically increasing in recent years. Most of the people believe that if vitamins are not effective, at least they are safe. However, the long term health consequences of vitamins consumption are unknown. This study aimed to assess the side effects and possible harmful and detrimental properties of vitamins and to discuss whether vitamins can be used as safe health products or dietary supplements. We performed a MED...

  4. The “Theoreticals” Pack

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    The Particle Zoo is a colourful set of hand-made soft toys representing the particles in the Standard Model and beyond. It includes a “theoreticals” pack where you can find yet undiscovered particles: the best-selling Higgs boson, the graviton, the tachyon, and dark matter. Supersymmetric particle soft toys are also available on demand. But what would happen to the zoo if Nature had prepared some unexpected surprises? Julie Peasley, the zookeeper, is ready to sew new smiling faces…   The "Theoreticals" pack in the Particle Zoo. There is only one place in the world where you can buy a smiling Higgs boson and it’s not at CERN, although this is where scientists hope to observe it. The blue star-shaped particle is the best seller of Julie Peasley’s Particle Zoo – a collection of tens of soft toys representing all sorts of particles, including composite and decaying particles.  Over the years Julie’s zoo ...

  5. EFFECT OF SHOULDER SIDE PACK ON DYNAMIC POSTURAL STABILITY IN YOUNG HEALTHY FEMALE

    Directory of Open Access Journals (Sweden)

    Enas ELsayed Mohamed Abutaleb

    2016-06-01

    Full Text Available Background: Control of balance is a complex motor skill that involves integration of sensory inputs and the planning and execution of flexible movement patterns. Carrying side packs is famous in our society especially shoulder side packs. Most students carry shoulder side packs and they don't care about the way to carry them to be more balanced. The purpose of the study is to investigate the effect of carrying shoulder side pack on dynamic postural stability and to determine the best way of carrying a shoulder side pack either on the dominant side or non-dominant side that doesn’t affect dynamic postural stability in young healthy female. Methods: Sixty female volunteers aged from 18 to 25 years old participated in the study. Biodex balance system was used to measure the dynamic postural stability in three different occasions (without carrying a shoulder side pack, with carrying a shoulder side pack on the dominant side, and on the non-dominant side with a rest period in between. Results: Repeated measure analysis of variance (ANOVA followed by Bonferroni post hoc test were used to compare dynamic posture balance without carrying and during carrying a shoulder side pack on dominant and non-dominant sides. Analysis revealed that overall, anteroposterior and mediolateral stability indexes reduced significantly (P<0.0001 when carrying shoulder side pack on dominant side in comparison with when carrying shoulder side pack on non-dominant side and without carrying bag. Conclusion: It was concluded that carrying a shoulder side pack on the non-dominant side didn't disturb the postural stability when compared to carrying on the dominant side so, we recommend the students to carry shoulder side packs on the non-dominant side.

  6. Pebble bed packing in prismatic containers

    Energy Technology Data Exchange (ETDEWEB)

    Reimann, Joerg, E-mail: reimann-langhans@web.de [Karlsruhe Institute of Technology, P.O. Box 3640, 76021 Karlsruhe (Germany); Abou-Sena, Ali [Karlsruhe Institute of Technology, P.O. Box 3640, 76021 Karlsruhe (Germany); Nippen, Rainer [KBHF GmbH, Herrmann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Tafforeau, Paul [European Synchrotron Radiation Facility, B.P. 220, F-38043 Grenoble Cedex (France)

    2013-10-15

    Highlights: • The essential part of ceramic breeder blankets is pebble beds. • The packing factor for blanket relevant cavities must be known. • Tomography experiments revealed details of packing arrangements. • Packing experiments confirm that reference packing factors will be achieved. -- Abstract: New analyses of previous tomography investigations show in detail void fraction fluctuations close to walls generated by regular pebble arrangements. Local packing factors within the pebble bed were determined for characteristic zones. These results are very helpful for the interpretation of the packing experiments performed with spherical pebbles in different kinds of Plexiglas containers dominated by flat walls. The packing factors for single-size pebbles in the containers with a piston on top are fairly independent of bed height unless the height to diameter ratio becomes less than 10. For the closed rectangular containers, the development of structured packings is rendered more difficult. However, for blanket relevant bed heights, both for orthosilicate and beryllium pebbles, the packing factors obtained which agree well with previously obtained reference values.

  7. Behavioral Determinants of Switching to Arsenic-Safe Water Wells: An Analysis of a Randomized Controlled Trial of Health Education Interventions Coupled With Water Arsenic Testing

    Science.gov (United States)

    George, Christine Marie; Inauen, Jennifer; Perin, Jamie; Tighe, Jennifer; Hasan, Khaled; Zheng, Yan

    2017-01-01

    More than 100 million people globally are estimated to be exposed to arsenic in drinking water that exceeds the World Health Organization guideline of 10 µg/L. In an effort to develop and test a low-cost sustainable approach for water arsenic testing in Bangladesh, we conducted a randomized controlled trial which found arsenic educational…

  8. Packing defects into ordered structures

    DEFF Research Database (Denmark)

    Bechstein, R.; Kristoffersen, Henrik Høgh; Vilhelmsen, L.B.

    2012-01-01

    We have studied vicinal TiO2(110) surfaces by high-resolution scanning tunneling microscopy and density functional theory calculations. On TiO2 surfaces characterized by a high density of ⟨11̅ 1⟩ steps, scanning tunneling microscopy reveals a high density of oxygen-deficient strandlike adstructures....... With the help of density functional theory calculations we develop a complete structural model for the entire strand and demonstrate these adstructures to be more stable than an equivalent amount of bulk defects such as Ti interstitials. We argue that strands can form particularly easy on stepped surfaces...... because building material is available at step sites. The strands on TiO2(110) represent point defects that are densely packed into ordered adstructures....

  9. Safe Surgery Trainer

    Science.gov (United States)

    2015-08-15

    CDRL A001 For: Safe Surgery Trainer Prime Contract: N00014-14-C-0066 For the Period July 1, 2015 to July 31, 2015 Submitted: 15 Aug 2015...DATE 15 AUG 2015 2. REPORT TYPE 3. DATES COVERED 01-07-2015 to 31-07-2015 4. TITLE AND SUBTITLE Safe Surgery Trainer 5a. CONTRACT NUMBER 5b... Surgery Trainer ONR N00014-14-C-0066 Unclassified Unclassified Use or disclosure of the data contained on this page is subject to the restriction

  10. Can fMRI safely replace the Wada test for preoperative assessment of language lateralisation? A meta-analysis and systematic review.

    Science.gov (United States)

    Bauer, Prisca R; Reitsma, Johannes B; Houweling, Bernard M; Ferrier, Cyrille H; Ramsey, Nick F

    2014-05-01

    Recent studies have shown that fMRI (functional magnetic resonance imaging) may be of value for pre-surgical assessment of language lateralisation. The aim of this study was to systematically review and analyse the available literature. A systematic electronic search for studies comparing fMRI with Wada testing was conducted in the PubMed database between March 2009 and November 2011. Studies involving unilateral Wada testing, study population consisting exclusively of children younger than 12 years of age or involving five patients or fewer were excluded. 22 studies (504 patients) were included. A random effects meta-analysis was conducted to obtain pooled estimates of the positive and negative predictive values of the fMRI using the Wada test as the reference standard. The impact of several study features on the performance of fMRI was assessed. The results showed that 81% of patients were correctly classified as having left or right language dominance or mixed language representation. Techniques were discordant in 19% of patients. fMRI and Wada test agreed in 94% for typical language lateralisation and in 51% for atypical language lateralisation. Language production or language comprehension tasks and different regions of interest did not yield statistically significant different results. It can be concluded that fMRI is reliable when there is strong left-lateralised language. The Wada test is warranted when fMRI fails to show clear left-lateralisation.

  11. 21 CFR 890.5700 - Cold pack.

    Science.gov (United States)

    2010-04-01

    ... Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Therapeutic Devices § 890.5700 Cold pack. (a) Identification. A cold pack is a device intended for medical purposes that consists of a compact fabric envelope...

  12. Hardness of approximation for strip packing

    DEFF Research Database (Denmark)

    Adamaszek, Anna Maria; Kociumaka, Tomasz; Pilipczuk, Marcin

    2017-01-01

    -dimensional knapsack. In this article, we answer this question in negative by proving that it is NP-hard to approximate strip packing within a factor better than 12/11, even when restricted to polynomially bounded input data. In particular, this shows that the strip packing problem admits no quasi-polynomial time...

  13. Protein packing quality using Delaunay complexes

    DEFF Research Database (Denmark)

    Fonseca, Rasmus; Winter, Pawel; Karplus, Kevin

    2011-01-01

    A new method for estimating the packing quality of protein structures is presented. Atoms in high quality protein crystal structures are very uniformly distributed which is difficult to reproduce using structure prediction methods. Packing quality measures can therefore be used to assess structur...

  14. Safe Halloween Thrills.

    Science.gov (United States)

    Kuersten, Joan

    1998-01-01

    Two PTAs sponsored events that capitalized on Halloween themes, engaged their communities in fall celebrations, and were safe, wholesome, and fun. With help from local volunteers, one school turned its gymnasium into a 19th-century British town with a fall/Halloween theme. Another PTA hosted a carnival, Spooktacular, that involved community…

  15. Safe Motherhood in Malawi

    African Journals Online (AJOL)

    very important that midwives be available for the well being of these women. However, mere presence of ... nurse-midwives in working towards safe motherhood in Malawi and some recommendations in an attempt ... hospitals, the working conditions worsen for the remaining nurs- es and as a result they are also tempted to ...

  16. Keeping Food Safe

    Centers for Disease Control (CDC) Podcasts

    2009-05-27

    This CDC Kidtastics podcast discusses things kids and parents can do to help prevent illness by keeping food safe.  Created: 5/27/2009 by National Center for Zoonotic, Vector-Borne, and Enteric Diseases (NCZVED).   Date Released: 5/27/2009.

  17. The safe spinal anaesthetic

    African Journals Online (AJOL)

    and complications. To perform a safe procedure, the anaesthetist must have adequate knowledge of the indications and contra-indications, and of the relevant anatomy, physiology and pharmacology of spinal anaesthesia. The patient must be assessed before administration of the spinal anaesthetic and the theatre must be.

  18. The Relationship of Safe and Participatory School Environments and Supportive Attitudes toward Violence: Evidence from the Colombian Saber Test of Citizenship Competencies

    Science.gov (United States)

    Diazgranados, Silvia; Noonan, James

    2015-01-01

    In Colombia, reducing levels of interpersonal and community violence is a key component of the country's approach to citizenship education. In this study, we use data collected during the 2005 Saber test of Citizenship Competencies to examine the relationship of school environments and individual students' supportive attitudes toward violence…

  19. Packing of renal fossa: Useful technique for intractable bleeding after open pyelolithotomy surgery

    Directory of Open Access Journals (Sweden)

    Mohinder Kumar Malhotra

    2012-01-01

    Full Text Available There is no documented study to indicate the role of prolonged packing of renal fossa (24 to 48 hours to control bleeding in life threating haemorrhage following open pyelolithotomy without compromise in the renal functions. On the contrary emergency nephrectomy was performed for intractable bleeding during renal stone surgery in peripheral hospitals. Several studies have shown the usefulness of temporary packing to control bleeding in liver injuries and following open heart operations. Packing of the renal fossa with laparotomy pads in unstable patients, and transferring the patient to the surgical intensive care unit (ICU is also described in trauma but not in controlling bleeding after open pyelolithotomy .This study comprises of three such patients whose kidneys were salvaged by a simple procedure of temporary packing of renal fossa for period of 24-48 hours who had developed life threatening haemorrhage after open pyelolithotomy. This technique is simple and worth trying especially for surgeons who are contemplating nephrectomy as prolonged packing has not lead to any compromise in renal functions. The aim of this manuscript is very limited and clear. Packing is not a licence to carry out open pyelolithotomy without proper expertise and local backup or resources. Principles of safe and ethical surgical practice should never be violated as it can lead to medico legal complications.

  20. Frac-and-pack stimulation: Application, design, and field experience

    Energy Technology Data Exchange (ETDEWEB)

    Roodhart, L.P.; Fokker, P.A.; Davies, D.R.; Shlyapobersky, J.; Wong, G.K.

    1994-03-01

    This paper discusses the criteria for selecting wells to be frac-and-packed. The authors show how systematic study of the inflow performance can be used to assess the potential of frac-and-packed wells, to identify the controlling factors, and to optimize design parameters. They also show that fracture conductivity is often the key to successful treatment. This conductivity depends largely on proppant size; formation permeability damage around the created fracture has less effect. Appropriate allowance needs to be made for flow restrictions caused by the presence of the perforations, partial penetration, and non-Darcy effects. They describe the application of the overpressure-calibrated hydraulic fracture model in frac-and-pack treatment design, and discuss some operational considerations with reference to field examples. The full potential of this promising new completion method can be achieved only if the design is tailored to the individual well. This demands high-quality input data, which can be obtained only from a calibration test. This paper presents their strategy for frac-and-pack design, drawing on examples from field experience. They also point out several areas that the industry needs to address, such as the sizing of proppant in soft formations and the interaction between fracturing fluids and resin in resin-coated proppant.

  1. Condensation in Nanoporous Packed Beds.

    Science.gov (United States)

    Ally, Javed; Molla, Shahnawaz; Mostowfi, Farshid

    2016-05-10

    In materials with tiny, nanometer-scale pores, liquid condensation is shifted from the bulk saturation pressure observed at larger scales. This effect is called capillary condensation and can block pores, which has major consequences in hydrocarbon production, as well as in fuel cells, catalysis, and powder adhesion. In this study, high pressure nanofluidic condensation studies are performed using propane and carbon dioxide in a colloidal crystal packed bed. Direct visualization allows the extent of condensation to be observed, as well as inference of the pore geometry from Bragg diffraction. We show experimentally that capillary condensation depends on pore geometry and wettability because these factors determine the shape of the menisci that coalesce when pore filling occurs, contrary to the typical assumption that all pore structures can be modeled as cylindrical and perfectly wetting. We also observe capillary condensation at higher pressures than has been done previously, which is important because many applications involving this phenomenon occur well above atmospheric pressure, and there is little, if any, experimental validation of capillary condensation at such pressures, particularly with direct visualization.

  2. Hawking Colloquium Packed CERN Auditoriums

    CERN Multimedia

    2006-01-01

    Stephen Hawking's week long visit to CERN included an 'exceptional CERN colloquium' which filled six auditoriums. Stephen Hawking during his visit to the ATLAS experiment. Stephen Hawking, Lucasian Professor of Cambridge University, visited the Theory Unit of the Physics Department from 24 September to 1 October 2006. As part of his visit, he gave two lectures in the main auditorium - a theoretical seminar on 'The Semi-Classical Birth of The Universe', attended by about 120 specialists; and a colloquium titled 'The Origin of The Universe'. As a key public figure in theoretical physics, his presence was eagerly awaited on both occasions. Those who wanted to attend the colloquium had to arrive early and be equipped with plenty of patience. An hour before it was due to begin, the 400 capacity of the main auditorium was already full. The lecture, simultaneously broadcast to five other fully packed CERN auditoriums, was attended by an estimated total of 850. Stephen Hawking attracted a large CERN crowd, filling ...

  3. Ice pack heat sink subsystem, phase 2. [astronaut life support cooling system

    Science.gov (United States)

    Roebelen, G. J., Jr.; Kellner, J. D.

    1975-01-01

    The report describes the design, development, fabrication, and test at one gravity of a prototype ice pack heat sink subsystem to be used eventually for astronaut cooling during manned space missions; the investigation of thermal storage material with the objective of uncovering materials with heats of fusion and/or solution in the range of 300 Btu/lb (700 kilojoules/kilogram); and the planned procedure for implementing an ice pack heat sink subsystem flight experiment. In normal use, excess heat in the liquid cooling garment (LCG) coolant is transferred to a reusable/regenerable ice pack heat sink. For emergency operation, or for extension of extravehicular activity mission time after all the ice has melted, water from the ice pack is boiled to vacuum, thereby continuing to remove heat from the LCG coolant. This subsystem incorporates a quick disconnect thermal interface between the ice pack heat sink and the subsystem heat exchanger.

  4. A low cost, safe, disposable, rapid and self-sustainable paper-based platform for diagnostic testing: lab-on-paper

    Science.gov (United States)

    Costa, M. N.; Veigas, B.; Jacob, J. M.; Santos, D. S.; Gomes, J.; Baptista, P. V.; Martins, R.; Inácio, J.; Fortunato, E.

    2014-03-01

    There is a strong interest in the use of biopolymers in the electronic and biomedical industries, mainly towards low-cost applications. The possibility of developing entirely new kinds of products based on cellulose is of current interest, in order to enhance and to add new functionalities to conventional paper-based products. We present our results towards the development of paper-based microfluidics for molecular diagnostic testing. Paper properties were evaluated and compared to nitrocellulose, the most commonly used material in lateral flow and other rapid tests. Focusing on the use of paper as a substrate for microfluidic applications, through an eco-friendly wax-printing technology, we present three main and distinct colorimetric approaches: (i) enzymatic reactions (glucose detection); (ii) immunoassays (antibodies anti-Leishmania detection); (iii) nucleic acid sequence identification (Mycobacterium tuberculosis complex detection). Colorimetric glucose quantification was achieved through enzymatic reactions performed within specific zones of the paper-based device. The colouration achieved increased with growing glucose concentration and was highly homogeneous, covering all the surface of the paper reaction zones in a 3D sensor format. These devices showed a major advantage when compared to the 2D lateral flow glucose sensors, where some carryover of the coloured products usually occurs. The detection of anti-Leishmania antibodies in canine sera was conceptually achieved using a paper-based 96-well enzyme-linked immunosorbent assay format. However, optimization is still needed for this test, regarding the efficiency of the immobilization of antigens on the cellulose fibres. The detection of Mycobacterium tuberculosis nucleic acids integrated with a non-cross-linking gold nanoprobe detection scheme was also achieved in a wax-printed 384-well paper-based microplate, by the hybridization with a species-specific probe. The obtained results with the above

  5. Safe use of nanomaterials

    CERN Multimedia

    2013-01-01

    The use of nanomaterials  is on the increase worldwide, including at CERN. The HSE Unit has established a safety guideline to inform you of the main requirements for the safe handling and disposal of nanomaterials at CERN.   A risk assessment tool has also been developed which guides the user through the process of evaluating the risk for his or her activity. Based on the calculated risk level, the tool provides a list of recommended control measures.   We would therefore like to draw your attention to: Safety Guideline C-0-0-5 - Safe handling and disposal of nanomaterials; and Safety Form C-0-0-2 - Nanomaterial Risk Assessment   You can consult all of CERN’s safety rules and guidelines here. Please contact the HSE Unit for any questions you may have.   The HSE Unit

  6. Microelectromechanical safe arm device

    Science.gov (United States)

    Roesler, Alexander W [Tijeras, NM

    2012-06-05

    Microelectromechanical (MEM) apparatus and methods for operating, for preventing unintentional detonation of energetic components comprising pyrotechnic and explosive materials, such as air bag deployment systems, munitions and pyrotechnics. The MEM apparatus comprises an interrupting member that can be moved to block (interrupt) or complete (uninterrupt) an explosive train that is part of an energetic component. One or more latching members are provided that engage and prevent the movement of the interrupting member, until the one or more latching members are disengaged from the interrupting member. The MEM apparatus can be utilized as a safe and arm device (SAD) and electronic safe and arm device (ESAD) in preventing unintentional detonations. Methods for operating the MEM apparatus include independently applying drive signals to the actuators coupled to the latching members, and an actuator coupled to the interrupting member.

  7. A novel approach of battery pack state of health estimation using artificial intelligence optimization algorithm

    Science.gov (United States)

    Zhang, Xu; Wang, Yujie; Liu, Chang; Chen, Zonghai

    2018-02-01

    An accurate battery pack state of health (SOH) estimation is important to characterize the dynamic responses of battery pack and ensure the battery work with safety and reliability. However, the different performances in battery discharge/charge characteristics and working conditions in battery pack make the battery pack SOH estimation difficult. In this paper, the battery pack SOH is defined as the change of battery pack maximum energy storage. It contains all the cells' information including battery capacity, the relationship between state of charge (SOC) and open circuit voltage (OCV), and battery inconsistency. To predict the battery pack SOH, the method of particle swarm optimization-genetic algorithm is applied in battery pack model parameters identification. Based on the results, a particle filter is employed in battery SOC and OCV estimation to avoid the noise influence occurring in battery terminal voltage measurement and current drift. Moreover, a recursive least square method is used to update cells' capacity. Finally, the proposed method is verified by the profiles of New European Driving Cycle and dynamic test profiles. The experimental results indicate that the proposed method can estimate the battery states with high accuracy for actual operation. In addition, the factors affecting the change of SOH is analyzed.

  8. Modular vaccine packaging increases packing efficiency.

    Science.gov (United States)

    Norman, Bryan A; Rajgopal, Jayant; Lim, Jung; Gorham, Katrin; Haidari, Leila; Brown, Shawn T; Lee, Bruce Y

    2015-06-17

    Within a typical vaccine supply chain, vaccines are packaged into individual cylindrical vials (each containing one or more doses) that are bundled together in rectangular "inner packs" for transport via even larger groupings such as cold boxes and vaccine carriers. The variability of vaccine inner pack and vial size may hinder efficient vaccine distribution because it constrains packing of cold boxes and vaccine carriers to quantities that are often inappropriate or suboptimal in the context of country-specific vaccination guidelines. We developed in Microsoft Excel (Microsoft Corp., Redmond, WA) a spreadsheet model that evaluated the impact of different packing schemes for the Benin routine regimen plus the introduction of the Rotarix vaccine. Specifically, we used the model to compare the current packing scheme to that of a proposed modular packing scheme. Conventional packing of a Dometic RCW25 that aims to maximize fully-immunized children (FICs) results in 123 FICs and a packing efficiency of 81.93% compared to a maximum of 155 FICs and 94.1% efficiency for an alternative modular packaging system. Our analysis suggests that modular packaging systems could offer significant advantages over conventional vaccine packaging systems with respect to space efficiency and potential FICs, when they are stored in standard vaccine carrying devices. This allows for more vaccines to be stored within the same volume while also simplifying the procedures used by field workers to pack storage devices. Ultimately, modular packaging systems could be a simple way to help increase vaccine coverage worldwide. Copyright © 2015. Published by Elsevier Ltd.

  9. Using G6PD tests to enable the safe treatment of Plasmodium vivax infections with primaquine on the Thailand-Myanmar border: A cost-effectiveness analysis.

    Science.gov (United States)

    Devine, Angela; Parmiter, Minnie; Chu, Cindy S; Bancone, Germana; Nosten, François; Price, Ric N; Lubell, Yoel; Yeung, Shunmay

    2017-05-01

    Primaquine is the only licensed antimalarial for the radical cure of Plasmodium vivax infections. Many countries, however, do not administer primaquine due to fear of hemolysis in those with glucose-6-phosphate dehydrogenase (G6PD) deficiency. In other settings, primaquine is given without G6PD testing, putting patients at risk of hemolysis. New rapid diagnostic tests (RDTs) offer the opportunity to screen for G6PD deficiency prior to treatment with primaquine. Here we assessed the cost-effectiveness of using G6PD RDTs on the Thailand-Myanmar border and provide the model as an online tool for use in other settings. Decision tree models for the management of P. vivax malaria evaluated the costs and disability-adjusted life-years (DALYs) associated with recurrences and primaquine-induced hemolysis from a health care provider perspective. Screening with G6PD RDTs before primaquine use was compared to (1) giving chloroquine alone and (2) giving primaquine without screening. Data were taken from a recent study on the impact of primaquine on P. vivax recurrences and a literature review. Compared to the use of chloroquine alone, the screening strategy had similar costs while averting 0.026 and 0.024 DALYs per primary infection in males and females respectively. Compared to primaquine administered without screening, the screening strategy provided modest cost savings while averting 0.011 and 0.004 DALYs in males and females respectively. The probabilistic sensitivity analyses resulted in a greater than 75% certainty that the screening strategy was cost-effective at a willingness to pay threshold of US$500, which is well below the common benchmark of per capita gross domestic product for Myanmar. In this setting G6PD RDTs could avert DALYs by reducing recurrences and reducing hemolytic risk in G6PD deficient patients at low costs or cost savings. The model results are limited by the paucity of data available in the literature for some parameter values, including the

  10. Using G6PD tests to enable the safe treatment of Plasmodium vivax infections with primaquine on the Thailand-Myanmar border: A cost-effectiveness analysis.

    Directory of Open Access Journals (Sweden)

    Angela Devine

    2017-05-01

    Full Text Available Primaquine is the only licensed antimalarial for the radical cure of Plasmodium vivax infections. Many countries, however, do not administer primaquine due to fear of hemolysis in those with glucose-6-phosphate dehydrogenase (G6PD deficiency. In other settings, primaquine is given without G6PD testing, putting patients at risk of hemolysis. New rapid diagnostic tests (RDTs offer the opportunity to screen for G6PD deficiency prior to treatment with primaquine. Here we assessed the cost-effectiveness of using G6PD RDTs on the Thailand-Myanmar border and provide the model as an online tool for use in other settings.Decision tree models for the management of P. vivax malaria evaluated the costs and disability-adjusted life-years (DALYs associated with recurrences and primaquine-induced hemolysis from a health care provider perspective. Screening with G6PD RDTs before primaquine use was compared to (1 giving chloroquine alone and (2 giving primaquine without screening. Data were taken from a recent study on the impact of primaquine on P. vivax recurrences and a literature review. Compared to the use of chloroquine alone, the screening strategy had similar costs while averting 0.026 and 0.024 DALYs per primary infection in males and females respectively. Compared to primaquine administered without screening, the screening strategy provided modest cost savings while averting 0.011 and 0.004 DALYs in males and females respectively. The probabilistic sensitivity analyses resulted in a greater than 75% certainty that the screening strategy was cost-effective at a willingness to pay threshold of US$500, which is well below the common benchmark of per capita gross domestic product for Myanmar.In this setting G6PD RDTs could avert DALYs by reducing recurrences and reducing hemolytic risk in G6PD deficient patients at low costs or cost savings. The model results are limited by the paucity of data available in the literature for some parameter values

  11. Packing Structures of Soft Particles by Compression

    Science.gov (United States)

    Lee, Sangwoo; Chen, Liwen

    Recent discovery of Frank-Kasper phases in self-assembling materials stimulates exploration of new crystal structure to understand the origin of the complex packing structures nature selects. We investigated packing structures by block copolymer micelles in an aqueous/organic solvent mixture. The micellar solution showed two phase states of globular polymer phase and liquid phase containing homogeneously dispersed polymeric micelles. The micelles developed a close-packed order which transforms into a Frank-Kasper C14 phase as the concentration of block copolymer surfactant increases. This transition aligns with the sphericity criteria.

  12. Hashish Body Packing: A Case Report

    Directory of Open Access Journals (Sweden)

    Manuel Jesus Soriano-Perez

    2009-01-01

    Full Text Available A 42-year-old African male was brought by the police to the emergency department under suspicion of drug smuggling by body-packing. Plain abdominal radiograph showed multiple foreign bodies within the gastrointestinal tract. Contrast-enhanced abdominal CT confirmed the findings, and the patient admitted to have swallowed “balls” of hashish. Body-packing is a recognized method of smuggling drugs across international borders. Body packers may present to the emergency department because of drug toxicity, intestinal obstruction, or more commonly, requested by law-enforcement officers for medical confirmation or exclusion of suspected body packing.

  13. Comparing the efficacy of mature mud pack and hot pack treatments for knee osteoarthritis.

    Science.gov (United States)

    Sarsan, Ayşe; Akkaya, Nuray; Ozgen, Merih; Yildiz, Necmettin; Atalay, Nilgun Simsir; Ardic, Fusun

    2012-01-01

    The objective of this study is to compare the efficacy of mature mud pack and hot pack therapies on patients with knee osteoarthritis. This study was designed as a prospective, randomized-controlled, and single-blinded clinical trial. Twenty-seven patients with clinical and radiologic evidence of knee osteoarthritis were randomly assigned into two groups and were treated with mature mud packs (n 15) or hot packs (n=12). Patients were evaluated for pain [based on the visual analog scale (VAS)], function (WOMAC, 6 min walking distance), quality of life [Short Form-36 (SF-36)], and serum levels of tumor necrosis factor-alpha (TNF-α), interleukin-6 (IL-6), and insulin-like growth factor-1 (IGF-1) at baseline, post-treatment, and 3 and 6~months after treatment. The mud pack group shows a significant improvement in VAS, pain, stifness, and physical function domains of WOMAC. The difference between groups of pain and physical activity domains is significant at post-treatment in favor of mud pack. For a 6 min walking distance, mud pack shows significant improvement, and the difference is significant between groups in favor of mud pack at post-treatment and 3 and 6 months after treatment. Mud pack shows significant improvement in the pain subscale of SF-36 at the third month continuing until the sixth month after the treatment. Significant improvements are found for the social function, vitality/energy, physical role disability, and general health subscales of SF-36 in favor of the mud pack compared with the hot pack group at post-treatment. A significant increase is detected for IGF-1 in the mud pack group 3 months after treatment compared with the baseline, and the difference is significant between groups 3 months after the treatment. Mud pack is a favorable option compared with hotpack for pain relief and for the improvement of functional conditions in treating patients with knee osteoarthritis.

  14. Escola segura Safe school

    Directory of Open Access Journals (Sweden)

    Edson Ferreira Liberal

    2005-11-01

    Full Text Available OBJETIVO: Revisão das estratégias para tornar o ambiente escolar seguro. Inicialmente os autores contextualizam a violência e os acidentes no ambiente escolar e fazem recomendações, baseadas em dados da literatura, para a implantação de escolas seguras. FONTE DE DADOS: Artigos publicados entre 1993 e 2005 na base de dados MEDLINE. Dados nacionais epidemiológicos e da literatura também foram pesquisados. SÍNTESE DOS DADOS: Há evidência crescente de que a intervenção tem múltiplos componentes. O foco político é a prática em educação em saúde com o envolvimento de toda a comunidade. O norte dessas intervenções é ajudar estudantes e toda a comunidade a adotar um comportamento seguro e saudável. As escolas estão assumindo um envolvimento crescente na promoção da saúde, prevenção de doenças e prevenção de trauma. Nesse contexto de prevenção de causas externas de morbimortalidade, é importante reconhecer o risco ambiental, locais e comportamentos de risco como favoráveis ao trauma e à violência, além de um novo conceito de acidentes como algo que possa ser evitado. CONCLUSÃO: A implementação da escola segura representa uma nova direção promissora para o trabalho preventivo baseado na escola. É importante notar que uma escola segura deve intervir não meramente na sua estrutura física, mas também torná-la tão segura quanto possível, trabalhando com a comunidade escolar por meio de educação em saúde, discutindo principalmente o comportamento saudável.OBJECTIVE: To review the strategies to make school a safe environment. The paper first addresses the social context of accidents and violence in the school environment, and makes recommendations, based on the literature data, for the implementation of safe schools. SOURCE OF DATA: Articles published between 1993 and 2005 in the MEDLINE database. Brazilian epidemiological and literature data have also been searched. SUMMARY OF THE FINDINGS: There is

  15. Packing circles and spheres on surfaces

    KAUST Repository

    Schiftner, Alexander

    2009-01-01

    Inspired by freeform designs in architecture which involve circles and spheres, we introduce a new kind of triangle mesh whose faces\\' incircles form a packing. As it turns out, such meshes have a rich geometry and allow us to cover surfaces with circle patterns, sphere packings, approximate circle packings, hexagonal meshes which carry a torsion-free support structure, hybrid tri-hex meshes, and others. We show how triangle meshes can be optimized so as to have the incircle packing property. We explain their relation to conformal geometry and implications on solvability of optimization. The examples we give confirm that this kind of meshes is a rich source of geometric structures relevant to architectural geometry. © 2009 ACM.

  16. Packing circles and spheres on surfaces

    KAUST Repository

    Schiftner, Alexander

    2009-12-01

    Inspired by freeform designs in architecture which involve circles and spheres, we introduce a new kind of triangle mesh whose faces\\' incircles form a packing. As it turns out, such meshes have a rich geometry and allow us to cover surfaces with circle patterns, sphere packings, approximate circle packings, hexagonal meshes which carry a torsion-free support structure, hybrid tri-hex meshes, and others. We show how triangle meshes can be optimized so as to have the incircle packing property. We explain their relation to conformal geometry and implications on solvability of optimization. The examples we give confirm that this kind of meshes is a rich source of geometric structures relevant to architectural geometry.

  17. Safe venting of hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, W.F.; Dewart, J.M.; Edeskuty, F.J.

    1990-01-01

    The disposal of hydrogen is often required in the operation of an experimental facility that contains hydrogen. Whether the vented hydrogen can be discharged to the atmosphere safely depends upon a number of factors such as the flow rate and atmospheric conditions. Calculations have been made that predict the distance a combustible mixture can extend from the point of release under some specified atmospheric conditions. Also the quantity of hydrogen in the combustible cloud is estimated. These results can be helpful in deciding of the hydrogen can be released directly to the atmosphere, or if it must be intentionally ignited. 15 refs., 5 figs., 2 tabs.

  18. Introducing new technology safely.

    Science.gov (United States)

    Mytton, Oliver T; Velazquez, Adriana; Banken, Reiner; Mathew, Joseph L; Ikonen, Tuija S; Taylor, Kevin; Painter, Frank; Jean-Baptiste, Rachel; Poon, Albert; Ruelas, Enrique

    2010-08-01

    This report considers the introduction of new technology and the implications for patient safety. A distinction is made between 'conceptually' new and 'contextually' new technology. The life cycle of technology from development to routine use is discussed and the key role for regulation, health technology assessment, clinical engineering and surveillance in this life cycle considered. The limitations of each of these disciplines are also discussed. Special consideration is given to the needs of developing countries. Case study examples of particular challenges in the safe introduction of technology are presented.

  19. Modular vaccine packaging increases packing efficiency

    Science.gov (United States)

    Norman, Bryan A.; Rajgopal, Jayant; Lim, Jung; Gorham, Katrin; Haidari, Leila; Brown, Shawn T.; Lee, Bruce Y.

    2015-01-01

    Background Within a typical vaccine supply chain, vaccines are packaged into individual cylindrical vials (each containing one or more doses) that are bundled together in rectangular “inner packs” for transport via even larger groupings such as cold boxes and vaccine carriers. The variability of vaccine inner pack and vial size may hinder efficient vaccine distribution because it constrains packing of cold boxes and vaccine carriers to quantities that are often inappropriate or suboptimal in the context of country-specific vaccination guidelines. Methods We developed in Microsoft Excel (Microsoft Corp., Redmond, WA) a spreadsheet model that evaluated the impact of different packing schemes for the Benin routine regimen plus the introduction of the Rotarix vaccine. Specifically, we used the model to compare the current packing scheme to that of a proposed modular packing scheme. Results Conventional packing of a Dometic RCW25 that aims to maximize fully-immunized children (FICs) results in 123 FICs and a packing efficiency of 81.93% compared to a maximum of 155 FICs and 94.1% efficiency for an alternative modular packaging system. Conclusions Our analysis suggests that modular packaging systems could offer significant advantages over conventional vaccine packaging systems with respect to space efficiency and potential FICs, when they are stored in standard vaccine carrying devices. This allows for more vaccines to be stored within the same volume while also simplifying the procedures used by field workers to pack storage devices. Ultimately, modular packaging systems could be a simple way to help increase vaccine coverage worldwide. PMID:25957666

  20. Project SafeFoodPack Design: case study on indirect migration from paper and boards.

    Science.gov (United States)

    Nguyen, Phuong-Mai; Julien, Jean Mario; Breysse, Colette; Lyathaud, Cédric; Thébault, Jacques; Vitrac, Olivier

    2017-10-01

    Migration due to indirect contact with packaging caused several major sanitary crises, including the spread contamination of dry food by mineral oils and printing ink constituents from cardboard. The issues are still not fully resolved because the mechanisms have been insufficiently described and the relationship between design, contamination level, type of contaminant, and conditions of storage (time and temperature) are poorly understood. This study proposes a forensic analysis of these phenomena when food is separated from cardboard by a plastic layer. Practical relationships and advanced simulation scenarios were devised and validated against the long-term migration between 20 and 60°C of 15 substances. They were chosen to be representative of the main contaminants of cardboard: aliphatic and aromatic mineral oils, photo-initiators and plasticisers. Data were summarised as iso-contamination curves and iso-contamination times up to 2 years. Simple rules are illustrated to extrapolate the results to arbitrary conditions in order to identify critical substances and to estimate the plastic film's thickness to keep the contamination within acceptable limits. Recommendations for the risk management of contamination routes without contact are finally drafted.

  1. The Maximum Resource Bin Packing Problem

    DEFF Research Database (Denmark)

    Boyar, J.; Epstein, L.; Favrholdt, L.M.

    2006-01-01

    Usually, for bin packing problems, we try to minimize the number of bins used or in the case of the dual bin packing problem, maximize the number or total size of accepted items. This paper presents results for the opposite problems, where we would like to maximize the number of bins used...... or minimize the number or total size of accepted items. We consider off-line and on-line variants of the problems. For the off-line variant, we require that there be an ordering of the bins, so that no item in a later bin fits in an earlier bin. We find the approximation ratios of two natural approximation...... algorithms, First-Fit-Increasing and First-Fit-Decreasing for the maximum resource variant of classical bin packing. For the on-line variant, we define maximum resource variants of classical and dual bin packing. For dual bin packing, no on-line algorithm is competitive. For classical bin packing, we find...

  2. Pharyngeal Packing during Rhinoplasty: Advantages and Disadvantages.

    Science.gov (United States)

    Razavi, Majid; Taghavi Gilani, Mehryar; Bameshki, Ali Reza; Behdani, Reza; Khadivi, Ehsan; Bakhshaee, Mahdi

    2015-11-01

    Controversy remains as to the advantages and disadvantages of pharyngeal packing during septorhinoplasty. Our study investigated the effect of pharyngeal packing on postoperative nausea and vomiting and sore throat following this type of surgery or septorhinoplasty. This clinical trial was performed on 90 American Society of Anesthesiologists (ASA) I or II patients who were candidates for septorhinoplasty. They were randomly divided into two groups. Patients in the study group had received pharyngeal packing while those in the control group had not. The incidence of nausea and vomiting and sore throat based on the visual analog scale (VAS) was evaluated postoperatively in the recovery room as well as at 2, 6 and 24 hours. The incidence of postoperative nausea and vomiting (PONV) was 12.3%, with no significant difference between the study and control groups. Sore throat was reported in 50.5% of cases overall (56.8% on pack group and 44.4% on control). Although the severity of pain was higher in the study group at all times, the incidence in the two groups did not differ significantly. The use of pharyngeal packing has no effect in reducing the incidence of nausea and vomiting and sore throat after surgery. Given that induced hypotension is used as the routine method of anesthesia in septorhinoplasty surgery, with a low incidence of hemorrhage and a high risk of unintended retention of pharyngeal packing, its routine use is not recommended for this procedure.

  3. Packing and size determination of colloidal nanoclusters.

    Science.gov (United States)

    Pease, Leonard F; Tsai, De-Hao; Hertz, Joshua L; Zangmeister, Rebecca A; Zachariah, Michael R; Tarlov, Michael J

    2010-07-06

    Here we demonstrate a rapid and quantitative means to characterize the size and packing structure of small clusters of nanoparticles in colloidal suspension. Clustering and aggregation play important roles in a wide variety of phenomena of both scientific and technical importance, yet characterizing the packing of nanoparticles within small clusters and predicting their aerodynamic size remains challenging because available techniques can lack adequate resolution and sensitivity for clusters smaller than 100 nm (optical techniques), perturb the packing arrangement (electron microscopies), or provide only an ensemble average (light scattering techniques). In this article, we use electrospray-differential mobility analysis (ES-DMA), a technique that exerts electrical and drag forces on the clusters, to determine the size and packing of small clusters. We provide an analytical model to determine the mobility size of various packing geometries based on the projected area of the clusters. Data for clusters aggregated from nominally 10 nm gold particles and nonenveloped viruses of various sizes show good agreement between measured and predicted cluster sizes for close-packed spheres.

  4. Decontamination of pesticide packing using ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Duarte, C.L. [Instituto de Pesquisas Energeticas e Nucleares-IPEN-CNEN/SP Av. Lineu Prestes 2.242, 05508-900, Sao Paulo, SP (Brazil)], E-mail: clduarte@ipen.br; Mori, M.N.; Kodama, Yasko; Oikawa, H.; Sampa, M.H.O. [Instituto de Pesquisas Energeticas e Nucleares-IPEN-CNEN/SP Av. Lineu Prestes 2.242, 05508-900, Sao Paulo, SP (Brazil)

    2007-11-15

    The Brazilian agriculture activities have consumed about 288,000 tons of pesticides per year conditioned in about 107,000,000 packing with weight of approximately 23,000 tons. The discharge of empty plastic packing of pesticides can be an environmental concern causing problems to human health, animals, and plants if done without inspection and monitoring. The objective of this work is to study the ionizing radiation effect in the main pesticides used in Brazil for plastic packing decontamination. Among the commercial pesticides, chlorpyrifos has significant importance because of its wide distribution and extensive use and persistence. The radiation-induced degradation of chlorpyrifos in liquid samples and in polyethylene pack was studied by gamma radiolysis. Packing of high-density polyethylene (HDPE) three layer coextruded, named COEX, contaminated with chlorpyrifos, were irradiated using both a multipurpose Co-60 gamma irradiator and a gamma source with 5000 Ci total activity Gamma cell type. The chemical analysis of the chlorpyrifos was made using a gas chromatography associated to the Mass Spectrometry-GCMS from Shimadzu Model QP 5000. Gamma radiation was efficient for removing chlorpyrifos from the plastic packing, in all studied cases.

  5. Is Daycare Tonsillectomy Safe?

    Science.gov (United States)

    Wong, Hui Tong; Sien Hui, Tan; Chong, Aun Wee

    2016-05-01

    Tonsillectomy is one of the most common procedures performed by Ear, Nose, and Throat surgeon. Usually, the procedure is carried out as an inpatient surgery. With the increasing need to reduce healthcare costs, spare precious hospital beds, and shorten elective surgery lists, there is currently a trend towards performing tonsillectomy on a daycare basis. A prospective review of all tonsillectomies performed at the University Malaya Medical Center was undertaken for the year 2013. Demographic details, qualifying indications, and complication rates were evaluated. There was no incidence of primary hemorrhage among the 96 tonsillectomies performed. There was no significant correlation in terms of secondary hemorrhage between inpatient and day-case tonsillectomy (P=0.54). Only two patients required revision surgery to stop post-tonsillectomy bleeding. None of the patients required blood transfusion, and there were no mortalities. Daycare tonsillectomy is safe as long as the patient is carefully selected. Both medical and social aspects should be taken into consideration. A post-operative observation period of at least 6 to 8 hours is important. The surgeon should personally review the patient post-operatively and decides if he or she should be hospitalized for observation, or safe for discharge.

  6. Vitamins, Are They Safe?

    Directory of Open Access Journals (Sweden)

    Hadi Hamishehkar

    2016-12-01

    Full Text Available The consumption of a daily multivitamin among people all over the world is dramatically increasing in recent years. Most of the people believe that if vitamins are not effective, at least they are safe. However, the long term health consequences of vitamins consumption are unknown. This study aimed to assess the side effects and possible harmful and detrimental properties of vitamins and to discuss whether vitamins can be used as safe health products or dietary supplements. We performed a MEDLINE/PubMed, EMBASE, Scopus and Google Scholar search and assessed reference lists of the included studies which were published from 1993 through 2015. The studies, with an emphasis on RCTs (randomized controlled clinical trials, were reviewed. As some vitamins such as fat-soluble vitamins (vitamin A, vitamin D, vitamin E, and also some of the water-soluble vitamins like folic acid may cause adverse events and some like vitamin C is widely taken assuming that it has so many benefits and no harm, we included relevant studies with negative or undesired results regarding the effect of these vitamins on health. Our recommendation is that taking high-dose supplements of vitamins A, E, D, C, and folic acid is not always effective for prevention of disease, and it can even be harmful to the health.

  7. Safe Minimum Internal Temperature Chart

    Science.gov (United States)

    ... JSR 286) Actions ${title} Loading... Safe Minimum Internal Temperature Chart Safe steps in food handling, cooking, and ... from other foods. Cook —Cook to the right temperature. Chill —Refrigerate food promptly. Cook all food to ...

  8. How to Safely Give Acetaminophen

    Science.gov (United States)

    ... Term Complications of Diabetes How to Safely Give Acetaminophen KidsHealth > For Parents > How to Safely Give Acetaminophen ... without getting a doctor's OK first. What Is Acetaminophen Also Called? Acetaminophen is the generic name of ...

  9. Effective and Safe Ships

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Amdahl, Jørgen; Rutgersson, Olle

    1996-01-01

    is given in the appendices. The project is planned to take three years from the start. There are 28 tasks and the total volume is 18 personyears, or 6.3 MFIM. A scientific approach will be used in performing the tasks and some of them may be subjects for post graduate studies. A close co-operation between......A Joint Nordic Research project "Effecive and Safe Ships" is presented. The project is aiming to develop methods and tools for quantitative evaluation fo ship safety. This report is the report of the preliminary phase where the plan for the main project is developed. The objectives of the project...... are described. The areas of safety that are presented are collisions, groundings, cargo shifting and ship fire. The areas of lack of knowledge are identified and the tasks within each subproject suggested. The proposal for the main project is presented in the summary. Background material of the state-of-the art...

  10. Life Prediction of Large Lithium-Ion Battery Packs with Active and Passive Balancing

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Ying [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Smith, Kandler A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zane, Regan [Utah State University; Anderson, Dyche [Ford Motor Company

    2017-07-03

    Lithium-ion battery packs take a major part of large-scale stationary energy storage systems. One challenge in reducing battery pack cost is to reduce pack size without compromising pack service performance and lifespan. Prognostic life model can be a powerful tool to handle the state of health (SOH) estimate and enable active life balancing strategy to reduce cell imbalance and extend pack life. This work proposed a life model using both empirical and physical-based approaches. The life model described the compounding effect of different degradations on the entire cell with an empirical model. Then its lower-level submodels considered the complex physical links between testing statistics (state of charge level, C-rate level, duty cycles, etc.) and the degradation reaction rates with respect to specific aging mechanisms. The hybrid approach made the life model generic, robust and stable regardless of battery chemistry and application usage. The model was validated with a custom pack with both passive and active balancing systems implemented, which created four different aging paths in the pack. The life model successfully captured the aging trajectories of all four paths. The life model prediction errors on capacity fade and resistance growth were within +/-3% and +/-5% of the experiment measurements.

  11. Sterility of Gauze Packed in One and Three Layer Layer Parchment Paper

    Directory of Open Access Journals (Sweden)

    Saskia Biyakto Putri

    2017-04-01

    Full Text Available Intoduction: Sterile gauze is one of the medical devices that are often used to prevent infection. Several things, one of them is materials for packaging, can affect the sterility of gauze. Parchment paper is one of the packaging materials for sterilization. The study was done to analyze the sterility of gauze packed with parchment paper one layer and three layers on the growth of microorganism. Method: This study was an experimental study with a quasi-experimental design. Samples were 60 gauze packed with one layer parchment paper and 60 gauze packed with three layers of parchment paper. The sterility of sterile gauze tested at weeks 0, 2 and 4. Results: There was no significant difference in the sterility of gauze packed with 1 layer of parchment paper on the growth of microorganisms at 0, 2, 4 weeks (p = 0.126. No significant difference in the sterility of sterile gauze packed with 3 layers of parchment paper at 0, 2, 4 weeks (p = 0.675. There was a significant difference in the sterility of sterile gauze packed with parchment paper 1 layer and 3 layers on the growth of microorganisms (p = 0.002. Conclusion There is a significant difference of sterile gauze packed with parchment paper 1 layer and 3 layers against the growth of microorganisms. The sterility of the packaged sterile gauze with a layer of parchment paper is better than the three layers.

  12. 48 CFR 452.247-72 - Packing for Domestic Shipment.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Packing for Domestic... Packing for Domestic Shipment. As prescribed in 447.305-10(b), insert the following clause: Packing for Domestic Shipment (FEB 1988) Material shall be packed for shipment in such a manner that will insure...

  13. An efficient block-discriminant identification of packed malware

    Indian Academy of Sciences (India)

    Modern malware hide their malicious payload by applying packing mechanism. Packing tools ... Despite being just a variant of known malware, the packed malware invalidates the traditional signature based malware detection as packing tools create an envelope of packer code around the original base malware. Therefore ...

  14. 27 CFR 24.308 - Bottled or packed wine record.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond shall...

  15. Working safely with electronics racks

    CERN Multimedia

    Simon Baird, HSE Unit Head

    2016-01-01

    Think of CERN and you’ll probably think of particle accelerators and detectors. These are the tools of the trade in particle physics, but behind them are the racks of electronics that include power supplies, control systems and data acquisition networks.   Inside an electronics rack: danger could be lurking if the rack is not powered off. In routine operation, these are no more harmful than the home entertainment system in your living room. But unscrew the cover and it’s a different matter. Even after following appropriate training, and with formal authorisation from your group leader or equivalent to carry out electrical work or any work in the vicinity of electrical hazards, and even with extensive experience of carrying out such operations, it’s important to incorporate safe working practices into your routine. At CERN, before the racks of electronics reach their operational configurations for the accelerators and detectors, they play a vital role in test set-ups ...

  16. Direct contact condensation in packed beds

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yi; Klausner, James F.; Mei, Renwei; Knight, Jessica [Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL 32611 (United States)

    2006-12-15

    A diffusion driven desalination process was recently described where a very effective direct contact condenser with a packed bed is used to condense water vapor out of an air/vapor mixture. A laboratory scale direct contact condenser has been fabricated as a twin tower structure with two stages, co-current and countercurrent. Experiments have been operated in each stage with respective saturated air inlet temperatures of 36, 40 and 43{sup o}C. The temperature and humidity data have been collected at the inlet and exit of the packed bed for different water to air mass flow ratios that vary between 0 and 2.5. A one-dimensional model based on conservation principles has been developed, which predicts the variation of temperature, humidity, and condensation rate through the condenser stages. Agreement between the model and experiments is very good. It is observed that the countercurrent flow stage condensation effectiveness is significantly higher than that for the co-current stage. The condensation heat and mass transfer rates were found to decrease when water blockages occur within the packed bed. Using high-speed digital cinematography, it was observed that this problem can occur at any operating condition, and is dependent on the packing surface wetting characteristics. This observation is used to explain the requirement for two different empirical constants, depending on packing diameter, suggested by Onda for the air side mass transfer coefficient correlation. (author)

  17. Evaluation of the pneumatic tube system for transportation of packed red cell units

    Directory of Open Access Journals (Sweden)

    Supriya Dhar

    2015-01-01

    Full Text Available Background: Pneumatic tube system (PTS is commonly used in hospital settings to transport blood samples to diagnostic laboratories. At our blood center, we receive blood requisitions via the PTS, but units are carried to the ward by human courier. Recently we considered using the PTS for transporting blood units. Since, there are reports of hemolysis in blood samples sent through the PTS, we evaluated this system for transporting red cell units. Aims: The aim was to assess the effect of PTS transport on the quality of packed red cell units. Materials and Methods: A total of 50 red blood cells units (RBC, (25 non-irradiated and 25 irradiated were subjected to transportation through the PTS. The control arm in the study was age-matched RBC units not subjected to PTS transport. Each RBC unit was evaluated for hemoglobin (Hb, lactate dehydrogenase, potassium and plasma hemoglobin (Hb. The paired t-test was used to compare these parameters, and the P value was calculated. Results and Conclusion: The percentage of hemolysis after transportation through PTS was below the recommended guidelines. Delivery of the blood unit to the wrong station, bags lying unattended at the destination were few of the problems that had to be addressed. To conclude, though the PTS is a safe means of transporting blood products with reduction in the turn-around-time, it must be validated before use.

  18. Evaluation of the pneumatic tube system for transportation of packed red cell units.

    Science.gov (United States)

    Dhar, Supriya; Basu, Sabita; Chakraborty, Subhosmito; Sinha, Subir

    2015-01-01

    Pneumatic tube system (PTS) is commonly used in hospital settings to transport blood samples to diagnostic laboratories. At our blood center, we receive blood requisitions via the PTS, but units are carried to the ward by human courier. Recently we considered using the PTS for transporting blood units. Since, there are reports of hemolysis in blood samples sent through the PTS, we evaluated this system for transporting red cell units. The aim was to assess the effect of PTS transport on the quality of packed red cell units. A total of 50 red blood cells units (RBC), (25 non-irradiated and 25 irradiated) were subjected to transportation through the PTS. The control arm in the study was age-matched RBC units not subjected to PTS transport. Each RBC unit was evaluated for hemoglobin (Hb), lactate dehydrogenase, potassium and plasma hemoglobin (Hb). The paired t-test was used to compare these parameters, and the P value was calculated. The percentage of hemolysis after transportation through PTS was below the recommended guidelines. Delivery of the blood unit to the wrong station, bags lying unattended at the destination were few of the problems that had to be addressed. To conclude, though the PTS is a safe means of transporting blood products with reduction in the turn-around-time, it must be validated before use.

  19. Personal tobacco pack display before and after the introduction of plain packaging with larger pictorial health warnings in Australia: an observational study of outdoor café strips.

    Science.gov (United States)

    Zacher, Meghan; Bayly, Megan; Brennan, Emily; Dono, Joanne; Miller, Caroline; Durkin, Sarah; Scollo, Michelle; Wakefield, Melanie

    2014-04-01

    We tested whether prevalence of cigarette pack display and smoking at outdoor venues and pack orientation changed following the introduction of plain packaging and larger pictorial health warnings in Australia. Between October and April 2011-12 (pre-plain packaging, pre-PP) and 2012-13 (post-plain packaging, post-PP), we counted patrons, smokers and tobacco packs at cafés, restaurants and bars with outdoor seating. Pack type (fully branded, plain or unknown) and orientation were noted. Rates of pack display, smoking and pack orientation were analysed using multi-level Poisson regression. Pack display declined by 15% [adjusted incident rate ratio (IRR) = 0.85, 95% confidence interval (CI) = 0.79-0.91, P branded packs pre-PP to 73.6% of plain packs post-PP (IRR = 0.87, 95% CI = 0.79-0.95, P = 0.002). Alternatively, the proportions concealed by telephones, wallets or other items (4.4% of fully branded packs pre-PP and 9.5% of plain packs post-PP; IRR = 2.33, 95% CI = 1.72-3.17, P case (1.5-3.5% of all packs; IRR = 2.79, 95% CI = 1.77-4.40, P Study of Addiction.

  20. Reliability of non-destructive test methods for ensuring the integrity of Cu welds for safe final storage of radioactive waste; Zuverlaessigkeit von ZfP-Verfahren zur Gewaehrleistung der Integritaet von Cu-Schweissnaehten zur sicheren Endlagerung radioaktiver Abfaelle

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, C.; Ewert, U.; Pavlovic, M.; Scharmach, M. [Federal Institute for Materials Research and Testing (BAM), Berlin (Germany); Ronneteg, U. [Materialteknik, Linkoeping (Sweden); Ryden, H. [Svensk Kaernbraenslehantering AB, Okarshamm (Sweden)

    2007-07-01

    Svensk Kaernbraenslehantering AB (Swedish Nuclear Fuel and Waste Management Co) is responsible for ultimate storage of spent nuclear fuel rods in Sweden. These will be stored in granite rock near the Swedish Baltic Sea coast at a depth of 500 m, in sealed concrete chambers which will require no further access in the future. The fuel rods will be embedded in a matrix consisting of a mixture of graphite and cast iron inside a sealed cylindrical tube made of Cu. Sealing will be carried out by electron beam welding or by friction stir welding. Modern methods of risk management are to ensure safe storage in all possible influencing scenarios up to the theoretical decay time 100 000 years hence. The welds are the weakest point of the system, so weld integrity testing is an important aspect. This is achieved by the method of 'probability of detection' (POD), which was originally developed for military aircrafts of the USA and was adapted for the more complex situations of 3D defects and 2D data fields of ultrasonic and X-ray testing. The POD is defined as a function of defect size. From the POD curve and the corresponding confidence limit, the system will identify the defect size with an acceptable certainty of detection with the required confidence range; this will be compared with the requirements on overall integrity. (orig.)

  1. An Automated Safe-to-Mate (ASTM) Tester

    Science.gov (United States)

    Nguyen, Phuc; Scott, Michelle; Leung, Alan; Lin, Michael; Johnson, Thomas

    2013-01-01

    Safe-to-mate testing is a common hardware safety practice where impedance measurements are made on unpowered hardware to verify isolation, continuity, or impedance between pins of an interface connector. A computer-based instrumentation solution has been developed to resolve issues. The ASTM is connected to the circuit under test, and can then quickly, safely, and reliably safe-to-mate the entire connector, or even multiple connectors, at the same time.

  2. Approximate hard-sphere method for densely packed granular flows.

    Science.gov (United States)

    Guttenberg, Nicholas

    2011-05-01

    The simulation of granular media is usually done either with event-driven codes that treat collisions as instantaneous but have difficulty with very dense packings, or with molecular dynamics (MD) methods that approximate rigid grains using a stiff viscoelastic spring. There is a little-known method that combines several collision events into a single timestep to retain the instantaneous collisions of event-driven dynamics, but also be able to handle dense packings. However, it is poorly characterized as to its regime of validity and failure modes. We present a modification of this method to reduce the introduction of overlap error, and test it using the problem of two-dimensional (2D) granular Couette flow, a densely packed system that has been well characterized by previous work. We find that this method can successfully replicate the results of previous work up to the point of jamming, and that it can do so a factor of 10 faster than comparable MD methods.

  3. Generalized network improvement and packing problems

    CERN Document Server

    Holzhauser, Michael

    2016-01-01

    Michael Holzhauser discusses generalizations of well-known network flow and packing problems by additional or modified side constraints. By exploiting the inherent connection between the two problem classes, the author investigates the complexity and approximability of several novel network flow and packing problems and presents combinatorial solution and approximation algorithms. Contents Fractional Packing and Parametric Search Frameworks Budget-Constrained Minimum Cost Flows: The Continuous Case Budget-Constrained Minimum Cost Flows: The Discrete Case Generalized Processing Networks Convex Generalized Flows Target Groups Researchers and students in the fields of mathematics, computer science, and economics Practitioners in operations research and logistics The Author Dr. Michael Holzhauser studied computer science at the University of Kaiserslautern and is now a research fellow in the Optimization Research Group at the Department of Mathematics of the University of Kaiserslautern.

  4. Wolf Pack Algorithm for Unconstrained Global Optimization

    Directory of Open Access Journals (Sweden)

    Hu-Sheng Wu

    2014-01-01

    Full Text Available The wolf pack unites and cooperates closely to hunt for the prey in the Tibetan Plateau, which shows wonderful skills and amazing strategies. Inspired by their prey hunting behaviors and distribution mode, we abstracted three intelligent behaviors, scouting, calling, and besieging, and two intelligent rules, winner-take-all generation rule of lead wolf and stronger-survive renewing rule of wolf pack. Then we proposed a new heuristic swarm intelligent method, named wolf pack algorithm (WPA. Experiments are conducted on a suit of benchmark functions with different characteristics, unimodal/multimodal, separable/nonseparable, and the impact of several distance measurements and parameters on WPA is discussed. What is more, the compared simulation experiments with other five typical intelligent algorithms, genetic algorithm, particle swarm optimization algorithm, artificial fish swarm algorithm, artificial bee colony algorithm, and firefly algorithm, show that WPA has better convergence and robustness, especially for high-dimensional functions.

  5. Spontaneous crystallization in athermal polymer packings.

    Science.gov (United States)

    Karayiannis, Nikos Ch; Foteinopoulou, Katerina; Laso, Manuel

    2012-12-24

    We review recent results from extensive simulations of the crystallization of athermal polymer packings. It is shown that above a certain packing density, and for sufficiently long simulations, all random assemblies of freely-jointed chains of tangent hard spheres of uniform size show a spontaneous transition into a crystalline phase. These polymer crystals adopt predominantly random hexagonal close packed morphologies. An analysis of the local environment around monomers based on the shape and size of the Voronoi polyhedra clearly shows that Voronoi cells become more spherical and more symmetric as the system transits to the ordered state. The change in the local environment leads to an increase in the monomer translational contribution to the entropy of the system, which acts as the driving force for the phase transition. A comparison of the crystallization of hard-sphere polymers and monomers highlights similarities and differences resulting from the constraints imposed by chain connectivity.

  6. Spontaneous Crystallization in Athermal Polymer Packings

    Directory of Open Access Journals (Sweden)

    Nikos Ch. Karayiannis

    2012-12-01

    Full Text Available We review recent results from extensive simulations of the crystallization of athermal polymer packings. It is shown that above a certain packing density, and for sufficiently long simulations, all random assemblies of freely-jointed chains of tangent hard spheres of uniform size show a spontaneous transition into a crystalline phase. These polymer crystals adopt predominantly random hexagonal close packed morphologies. An analysis of the local environment around monomers based on the shape and size of the Voronoi polyhedra clearly shows that Voronoi cells become more spherical and more symmetric as the system transits to the ordered state. The change in the local environment leads to an increase in the monomer translational contribution to the entropy of the system, which acts as the driving force for the phase transition. A comparison of the crystallization of hard-sphere polymers and monomers highlights similarities and differences resulting from the constraints imposed by chain connectivity.

  7. Experimental Study of a Pack of Supercapacitors Used in Electric Vehicles.

    Science.gov (United States)

    Mansour, Amari; Mohamed Hedi, Chabchoub; Faouzi, Bacha

    2017-01-01

    Electric vehicles have recently attracted research interest. An electric vehicle is composed of two energy sources, such as fuel cells and ultracapacitors, which are employed to provide, respectively, the steady-state and transient power demanded by the vehicle. A bidirectional DC-DC converter is needed to interface the ultracapacitor to a DC bus. The pack of ultracapacitor consists of many cells in series and possibly also in parallel. In this regard, this paper introduces a comparative study between two packs of supercapacitors. The first supercapacitor pack is composed of ten cells in series but the second supercapacitor pack is composed of five cells in series and two parallel circuits. Each cell is characterized by 2.5 V and 100 F. A number of practical tests are presented.

  8. Experimental Study of a Pack of Supercapacitors Used in Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Amari Mansour

    2017-01-01

    Full Text Available Electric vehicles have recently attracted research interest. An electric vehicle is composed of two energy sources, such as fuel cells and ultracapacitors, which are employed to provide, respectively, the steady-state and transient power demanded by the vehicle. A bidirectional DC-DC converter is needed to interface the ultracapacitor to a DC bus. The pack of ultracapacitor consists of many cells in series and possibly also in parallel. In this regard, this paper introduces a comparative study between two packs of supercapacitors. The first supercapacitor pack is composed of ten cells in series but the second supercapacitor pack is composed of five cells in series and two parallel circuits. Each cell is characterized by 2.5 V and 100 F. A number of practical tests are presented.

  9. Performance specifications for pack support types to cater for the variety of geotechnical areas encountered in the mining industry.

    CSIR Research Space (South Africa)

    Kullmann, D

    1999-03-01

    Full Text Available characteristics, pack construction and manufacturing quality. 3.1 Timber characteristics Timber is a natural material which can only be partly managed by foresters and nurserymen to improve its most desirable characteristics. There are a number of natural... frequently used for product development and routine testing. This press is sufficiently large to test any pack and has a piston stroke in excess of 400 mm. The platens can also be reset during a test to conduct a second compression on the pack for another...

  10. ABCD of Safe Dental Practice

    OpenAIRE

    Babu, K Sunil; Reddy B, V Thimma; Reddy, C Pujita; Lalita, Sree

    2011-01-01

    ABSTRACT Dental practice is the integral component of the oral health. Though the dental practice is in close relation with that of the medical practice, it has its own distinctiveness in relation to safe practice. The safe dental practice should not only assure good oral and general health but also improve social interaction by enhancing physical appearance, esthetics, etc. For the safe dental practice, dentists must excel in patient care and standard of treatment. The interlocking missions ...

  11. Safe Zones: Creating LGBT Safe Space Ally Programs

    Science.gov (United States)

    Poynter, Kerry John; Tubbs, Nancy Jean

    2008-01-01

    This article discusses model LGBT Safe Space Ally programs. These programs, often called "Safe Zones," include self selected students, faculty, and employees who publicly show support by displaying stickers, signs, and other identifiable items. Issues covered in the article include history, development, training, membership, assessment, and…

  12. A Safe Ride to School; A Safe Ride Home.

    Science.gov (United States)

    Illinois State Board of Education, Springfield.

    Text and illustrations are used to teach safe school bus riding practices. The guide begins with instructions to parents or guardians to set a good example of safe behavior, and to help children learn safety rules and be on time. Instructions to children concern obeying the bus driver, boarding the bus, riding the bus, crossing the road, and using…

  13. Computational Modelling of Particle Packing in Concrete

    NARCIS (Netherlands)

    He, H.

    2010-01-01

    Physical particle packing is becoming a hot topic in concrete technology as more and more types of granular materials are used in concrete either for ecological or for engineering purposes. Although various analytical methods have been developed for optimum mixture design, comprehensive information

  14. 5 Reasons to Pack Your Lunch

    Science.gov (United States)

    ... school! Here are the top 5 reasons to pack your lunch — and snacks — at least twice a week: 1. Control. Do you ever wait in the lunch line only to find when you get to the front that you don't like what they're ...

  15. Wrap-Attack Pack: Product Packaging Exercise

    Science.gov (United States)

    Lee, Seung Hwan; Hoffman, K. Douglas

    2016-01-01

    Although many marketing courses discuss traditional concepts pertaining to product strategy, concepts specifically relating to packaging are often glossed over. This exercise, "Wrap-Attack Pack," teaches students about the utilitarian and hedonic design elements of packaging. More specifically, the primary objective is to creatively…

  16. Relationship between Malaria Parasitaemia and Packed Cell ...

    African Journals Online (AJOL)

    Malaria parasitic infection is a disease causing high morbidity and mortality in most tropical parts of the world, where climatic conditions and sanitation practices favour their prevalence. The aim of this study is to determine the prevalence of malaria parasitaemia and its influence on pack cell volume among Primary School ...

  17. Origami, Modular Packing and the Soma Puzzle

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 8; Issue 11. Origami, Modular Packing and the Soma Puzzle. Subramania Ranganathan. General Article Volume 8 Issue 11 November 2003 pp 71-77. Fulltext. Click here to view fulltext PDF. Permanent link:

  18. On the fractal beauty of bin packing

    NARCIS (Netherlands)

    L. Epstein (Lea); S. Seiden; R. van Stee (Rob)

    2001-01-01

    textabstractIn the variable-sized online bin packing problem, one has to assign items to bins one by one. The bins are drawn from some fixed set of sizes, and the goal is to minimize the sum of the sizes of the bins used. We present the first unbounded space algorithms for this problem. We also show

  19. New performance data for {open_quotes}Emery 3002{close_quotes} and {open_quotes}Emery 3004,{close_quotes} two Army-approved safe materials to replace DOP in mask and filter testing

    Energy Technology Data Exchange (ETDEWEB)

    Carlon, H.R.; Guelta, M.A. [Army Edgewood Research, Development and Engineering Center, Aberdeen Proving Ground, MD (United States)

    1995-02-01

    At the 22nd Conference in Denver, we reported that the U.S. Army Surgeon General (SGJ) had approved our developmental material {open_quotes}Emery 3004{close_quotes} as a safe replacement for the suspected carcinogen DOP (dioctyl phthalate) in mask and filter testing throughout the Army. Subsequently the SG approved a second, less viscous material, {open_quotes}Emery 3002,{close_quotes} for similar applications. We have measured the viscosities and surface tensions of these liquids over a wide range of temperatures, and have initiated liquid breakup studies through Laskin and two-fluid nozzles. New measurements have been carried out with both liquids, e.g. using the ATI, Inc., TDA-4A cold generator to disperse aerosols for which droplet size distributions were measured using the TSI, Inc., Differential Mobility Particle Sizer (DMPS). Among the findings were that Emery 3004 performs much like DOP in the TDA-4A, with some possible advantages, while Emery 3002 in the TDA-4A produces mean droplet diameters about one-half those of Emery 3004 or DOP. This suggests that Emery 3002 could yield more rigorous filter tests with a smaller consumption of material. New laboratory results will be summarized. Sources of the {open_quotes}Emery{close_quotes} materials will be discussed since the production facility formerly operated by Emery is now run by the Ethyl Corporation and the source products are now known as {open_quotes}Ethylflo 192{close_quotes} (Emery 3002) and{open_quotes}Ethylflo 194{close_quotes} (Emery 3004).

  20. Teaching safe sex practices to psychiatric patients.

    Science.gov (United States)

    Sladyk, K

    1990-03-01

    An occupational therapist presented her 45-minute program called AIDS Education and Safe Sex 5 times to female mental patients in the locked ward of Cedarcrest Regional Hospital in Newington, Connecticut, to inform them about safe-sex practices and AIDS. She first administered a pretest then spoke briefly about AIDS and safe-sex practices. The lecture emphasized various important points such as no cure for AIDS exist, casual contact (e.g., kiss on the cheek, handshake) cannot transmit HIV, and effectiveness of using latex condoms. The occupational therapist spent much of her time addressing myths about AIDS and what safe-sex practices are. The patients discussed sexual abuse and dishonest partners. She administered a posttest which was the same as the pretest. Some sessions attracted more people than did other sessions. Test scores increased for every patient and for every session. They ranged from a 5% (68-73%) increase for the 3rd session to a 24% (67-91%) increase for the last session. She was not able to determine, however, whether the increased knowledge would translate into positive behavioral changes. Patients' psychiatric symptoms may have interfered with learning resulting in less than ideal improvements in knowledge. These symptoms were hypomanic behavior, restlessness, and distractibility. Perhaps other sessions with experiential techniques (e.g., putting condoms on dummies) would increase their understanding. This program helps fill the information gap not provided by the mass media which avoid mentioning safe-sex practices.

  1. Beef and pork packing industries.

    Science.gov (United States)

    MacDonald, James M

    2003-07-01

    A remarkable transformation of the meatpacking industry occurred in the last 25 years. That transformation consolidated the industry into one that could deliver large volumes of meat at low costs. Slaughter plants grew much larger and realized economies of scale from their size, and operations within plants were rationalized to emphasize the delivery of a small set of consistent major products (boxed beef, cut-up pork, and by-products) to retailers, wholesalers, and other processors. Similar developments occurred in livestock feeding whereby the industry realized significant cost reductions by consolidating production in very large cattle feedlots and hog farms. Gains from scale have largely been met (absent the development of new technologies that are not yet on the horizon); therefore, we are unlikely to see similar shifts in plant sizes in the next 25 years. The major forces affecting meatpacking and livestock feeding in the near future are more likely to revolve around tighter coordination among livestock production, meatpacking, wholesaling, and retailing. Although much of the recent response to food safety concerns took the form of investments in equipment, testing, and training within meatpacking plants, packers and retailers are likely to focus more on assurance of livestock production quality and methods in the future. Such assurance can be met through vertical integration or through a greater reliance on tightly drawn contracts; producers who attempt to provide the assurance while still selling through cash markets will need to develop paper trails of testing and quality assurance that will move through the marketing chain with livestock. Similarly, because of likely increased future demand for meats of assured consumer qualities, such as organically grown products or branded meat products with very specific traits, producers will likely need to provide similar indicators of assurance throughout the marketing chain. Finally, the funding offered through

  2. Cylinder packing by simulated annealing

    Directory of Open Access Journals (Sweden)

    M. Helena Correia

    2000-12-01

    Full Text Available This paper is motivated by the problem of loading identical items of circular base (tubes, rolls, ... into a rectangular base (the pallet. For practical reasons, all the loaded items are considered to have the same height. The resolution of this problem consists in determining the positioning pattern of the circular bases of the items on the rectangular pallet, while maximizing the number of items. This pattern will be repeated for each layer stacked on the pallet. Two algorithms based on the meta-heuristic Simulated Annealing have been developed and implemented. The tuning of these algorithms parameters implied running intensive tests in order to improve its efficiency. The algorithms developed were easily extended to the case of non-identical circles.Este artigo aborda o problema de posicionamento de objetos de base circular (tubos, rolos, ... sobre uma base retangular de maiores dimensões. Por razões práticas, considera-se que todos os objetos a carregar apresentam a mesma altura. A resolução do problema consiste na determinação do padrão de posicionamento das bases circulares dos referidos objetos sobre a base de forma retangular, tendo como objetivo a maximização do número de objetos estritamente posicionados no interior dessa base. Este padrão de posicionamento será repetido em cada uma das camadas a carregar sobre a base retangular. Apresentam-se dois algoritmos para a resolução do problema. Estes algoritmos baseiam-se numa meta-heurística, Simulated Annealling, cuja afinação de parâmetros requereu a execução de testes intensivos com o objetivo de atingir um elevado grau de eficiência no seu desempenho. As características dos algoritmos implementados permitiram que a sua extensão à consideração de círculos com raios diferentes fosse facilmente conseguida.

  3. Modified strip packing heuristics for the rectangular variable-sized bin packing problem

    Directory of Open Access Journals (Sweden)

    FG Ortmann

    2010-06-01

    Full Text Available Two packing problems are considered in this paper, namely the well-known strip packing problem (SPP and the variable-sized bin packing problem (VSBPP. A total of 252 strip packing heuristics (and variations thereof from the literature, as well as novel heuristics proposed by the authors, are compared statistically by means of 1170 SPP benchmark instances in order to identify the best heuristics in various classes. A combination of new heuristics with a new sorting method yields the best results. These heuristics are combined with a previous heuristic for the VSBPP by the authors to find good feasible solutions to 1357 VSBPP benchmark instances. This is the largest statistical comparison of algorithms for the SPP and the VSBPP to the best knowledge of the authors.

  4. Estimating cigarette tax avoidance and evasion: evidence from a national sample of littered packs

    Science.gov (United States)

    Barker, Dianne C; Wang, Shu; Merriman, David; Crosby, Andrew; Resnick, Elissa A; Chaloupka, Frank J

    2016-01-01

    Introduction A number of recent studies document the proportion of all cigarette packs that are ‘contraband’ using discarded packs to measure tax avoidance and evasion, which we call tax non-compliance. To date, academic studies using discarded packs focused on relatively small geographical areas such as a city or a neighbourhood. Methods We visited 160 communities across 38 US states in 2012 and collected data from littered cigarette packs as part of the State and Community Tobacco Control (SCTC) Research Initiative and the Bridging the Gap Community Obesity Measures Project (BTG-COMP). Data collectors were trained in a previously tested littered pack data collection protocol. Results Field teams collected 2116 packs with cellophane across 132 communities. We estimate a national tax non-compliance rate of 18.5% with considerable variation across regions. Suburban areas had lower non-compliance than urban areas as well as areas with high and low median household income areas compared with middle income areas. Discussion We present the first academic national study of tax non-compliance using littered cigarette packs. We demonstrate the feasibility of meaningful large-scale data collection using this methodology and document considerable variation in tax non-compliance across areas, suggesting that both policy differences and geography may be important in control of illicit tobacco use. Given the geography of open borders among countries with varying tax rates, this simple methodology may be appropriate to estimate tax non-compliance in countries that use tax stamps or other pack markings, such as health warnings. PMID:27697946

  5. Estimating cigarette tax avoidance and evasion: evidence from a national sample of littered packs.

    Science.gov (United States)

    Barker, Dianne C; Wang, Shu; Merriman, David; Crosby, Andrew; Resnick, Elissa A; Chaloupka, Frank J

    2016-10-01

    A number of recent studies document the proportion of all cigarette packs that are 'contraband' using discarded packs to measure tax avoidance and evasion, which we call tax non-compliance. To date, academic studies using discarded packs focused on relatively small geographical areas such as a city or a neighbourhood. We visited 160 communities across 38 US states in 2012 and collected data from littered cigarette packs as part of the State and Community Tobacco Control (SCTC) Research Initiative and the Bridging the Gap Community Obesity Measures Project (BTG-COMP). Data collectors were trained in a previously tested littered pack data collection protocol. Field teams collected 2116 packs with cellophane across 132 communities. We estimate a national tax non-compliance rate of 18.5% with considerable variation across regions. Suburban areas had lower non-compliance than urban areas as well as areas with high and low median household income areas compared with middle income areas. We present the first academic national study of tax non-compliance using littered cigarette packs. We demonstrate the feasibility of meaningful large-scale data collection using this methodology and document considerable variation in tax non-compliance across areas, suggesting that both policy differences and geography may be important in control of illicit tobacco use. Given the geography of open borders among countries with varying tax rates, this simple methodology may be appropriate to estimate tax non-compliance in countries that use tax stamps or other pack markings, such as health warnings. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  6. Shock Safe Nepal: team one

    NARCIS (Netherlands)

    Oosterhof, A.J.; Düzgün, B.C.; Spelt, C.J.; De Stoppelaar, A.O.; Van Wijnbergen, E.C.M.

    2016-01-01

    As a response to the 2015 Nepal earthquakes Shock Safe Nepal was founded to function as platform intended to contribute to the development of knowledge on earthquake safe housing. The project started on initiative of the Consul General of Nepal to The Netherlands Cas de Stoppelaar and the faculty of

  7. Basics for Handling Food Safely

    Science.gov (United States)

    ... Basics for Handling Food Safely Safe steps in food handling, cooking, and storage are essential to prevent foodborne illness. You can’t see, smell, or taste harmful bacteria that may cause illness. In every step of food preparation, follow the four Fight BAC! ® guidelines to ...

  8. Influence of the gap size and dielectric constant of the packing on the plasma discharge in a packed bed dielectric barrier discharge reactor: a fluid modeling study

    Science.gov (United States)

    van Laer, Koen; Bogaerts, Annemie

    2016-09-01

    Packed bed dielectric barrier discharge (DBD) reactors have proven to be very useful sources of non-thermal plasma for a wide range of applications, of which the environmental applications have received most attention in recent years. Compared to an empty DBD reactor, a packing was introduced to either enhance the energy efficiency of the process, or, if the packing is catalytically active, steer the process towards a preferred end product. A wide range of geometries, bead sizes and bead materials have been tested experimentally in the past. However, since experimental diagnostics become more difficult with a packing present, a computational study is proposed to gain more insight. Using COMSOL's built in plasma module, a 2D axisymmetric fluid model is developed to study the influence of the gap size and the dielectric constant (ɛ) of the packing. Helium is used as discharge gas, at atmospheric pressure and room temperature. By decreasing the gas gap, the electric field strength is enhanced, resulting in a higher number of current peaks per half cycle of applied rf potential. Increasing ɛ also enhances the electric field strength. However, after a certain ɛ, its influence saturates. The electric field strength will no longer increase, leaving the discharge behavior unchanged.

  9. Safe Anesthesia For Every Tot

    DEFF Research Database (Denmark)

    Weiss, Markus; Vutskits, Laszlo; Hansen, Tom G

    2015-01-01

    PURPOSE OF REVIEW: The term 'safe use of anesthesia in children is ill-defined and requires definition of and focus on the 'safe conduct of pediatric anesthesia'. RECENT FINDINGS: The Safe Anesthesia For Every Tot initiative (www.safetots.org) has been set up during the last year to focus...... on the safe conduct of pediatric anesthesia. This initiative aims to provide guidance on markers of quality anesthesia care. The introduction and implementation of national regulations of 'who, where, when and how' are required and will result in an improved perioperative outcome in vulnerable children....... The improvement of teaching, training, education and supervision of the safe conduct of pediatric anesthesia are the main goals of the safetots.org initiative. SUMMARY: This initiative addresses the well known perioperative risks in young children, perioperative causes for cerebral morbidity as well as gaps...

  10. Better Safe than Sorry

    DEFF Research Database (Denmark)

    Justesen, Mogens Kamp

    2014-01-01

    A growing literature argues that division of powers matter for economic growth by increasing the security of property rights. However, less effort has been devoted to examining the political and institutional conditions under which property rights have economic effects. This paper emphasizes...... that the economic effects of property rights depend on the division of powers between veto players, meaning that the interaction of veto players and property rights matters for economic growth. This argument is tested empirically on a panel of developing countries. The results show that the economic effects...

  11. Is incest common in gray wolf packs?

    Science.gov (United States)

    Smith, Deborah E; Meier, Thomas J.; Geffen, Eli; Mech, L. David; Burch, John W.; Adams, Layne G.; Wayne, Robert K.

    1997-01-01

    Wolf packs generally consist of a breeding pair and their maturing offspring that help provision and protect pack young. Because the reproductive tenure in wolves is often short, reproductively mature offspring might replace their parents, resulting in sibling or parent-offspring matings. To determine the extent of incestuous pairings, we measured relatedness based on variability in 20 microsatellite loci of mated pairs, parent-offspring pairs, and siblings in two populations of gray wolves. Our 16 sampled mated pairs had values of relatedness not overlapping those of known parent-offspring or sibling dyads, which is consistent with their being unrelated or distantly related. These results suggest that full siblings or a parent and its offspring rarely mate and that incest avoidance is an important constraint on gray wolf behavioral ecology.

  12. Packing and Disorder in Substituted Fullerenes

    KAUST Repository

    Tummala, Naga Rajesh

    2016-07-15

    Fullerenes are ubiquitous as electron-acceptor and electron-transport materials in organic solar cells. Recent synthetic strategies to improve the solubility and electronic characteristics of these molecules have translated into a tremendous increase in the variety of derivatives employed in these applications. Here, we use molecular dynamics (MD) simulations to examine the impact of going from mono-adducts to bis- and tris-adducts on the structural, cohesive, and packing characteristics of [6,6]-phenyl-C60-butyric acid methyl ester (PCBM) and indene-C60. The packing configurations obtained at the MD level then serve as input for density functional theory calculations that examine the solid-state energetic disorder (distribution of site energies) as a function of chemical substitution. The variations in structural and site-energy disorders reflect the fundamental materials differences among the derivatives and impact the performance of these materials in thin-film electronic devices.

  13. Imaging of drug smuggling by body packing.

    Science.gov (United States)

    Sica, Giacomo; Guida, Franco; Bocchini, Giorgio; Iaselli, Francesco; Iadevito, Isabella; Scaglione, Mariano

    2015-02-01

    Body packing, pushing, and stuffing are hazardous practices with complex medicolegal and social implications. A radiologist plays both a social and a medicolegal role in their assessment, and it should not be limited only to the identification of the packages but must also provide accurate information about their number and their exact location so as to prevent any package remains in the body packer. Radiologists must also be able to recognize the complications associated with these risky practices. Imaging assessment of body packing is performed essentially through plain abdominal X-ray and computed tomography scans. Ultrasound and magnetic resonance imaging, although with some advantages, actually have a limited use. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Body Packing: From Seizures to Laparotomy

    Directory of Open Access Journals (Sweden)

    Joanna M. Janczak

    2015-01-01

    Full Text Available Body packing is a common method for illegal drug trafficking. Complications associated with body packing can be severe and even lead to rapid death. Thus, a timely diagnosis is warranted. As most body packers initially do not show any symptoms, making a correct diagnosis can be rather challenging. We describe a case of a 41-year-old male, who was admitted with an epileptic seizure and who turned out to be a cocaine intoxicated body packer. Due to neurological and cardiovascular deterioration an emergency surgery was performed. Four bags of cocaine could be removed. We discuss the current management regimen in symptomatic and asymptomatic body packers and highlight pearls and pitfalls with diagnosis and treatment.

  15. 36 CFR 1002.16 - Horses and pack animals.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Horses and pack animals. 1002... AND RECREATION § 1002.16 Horses and pack animals. The following are prohibited: (a) The use of animals other than those designated as “pack animals” for purposes of transporting equipment. (b) The use of...

  16. 36 CFR 34.10 - Saddle and pack animals.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Saddle and pack animals. 34... INTERIOR EL PORTAL ADMINISTRATIVE SITE REGULATIONS § 34.10 Saddle and pack animals. The use of saddle and pack animals is prohibited without a permit from the Superintendent. ...

  17. 36 CFR 2.16 - Horses and pack animals.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Horses and pack animals. 2.16... RESOURCE PROTECTION, PUBLIC USE AND RECREATION § 2.16 Horses and pack animals. The following are prohibited: (a) The use of animals other than those designated as “pack animals” for purposes of transporting...

  18. Pack nitriding of aluminium using cassava waste | Shitta | Journal of ...

    African Journals Online (AJOL)

    Pack Nitriding is a process analogous to pack carbonizing. In this work, cassava leaves were employed as a source of nitrogen. Upon heating, slow decomposition of the compound provides Nitrogen, the Nitrogen was allowed to interact with aluminium metal surfaces, which were packed nitrided at temperature of 350°c.

  19. New Structured Packing CUB for Purification of Exhaust Gases

    Directory of Open Access Journals (Sweden)

    Irina Novikova

    2016-10-01

    Full Text Available New structured packing for heat and mass transfer processes named CUB is presented in our article. The packing can be applied in packed towers for exhaust gas cleaning instead random packing, for example, rings type that are the most used in such processes. The advantages of the new packing over random packing are lower pressure drop, capability of purification and as a consequence long-term service of the packing. The researches of intensity of liquid-phase mass-transfer in packed bed depending on liquid spray rate and gas velocity were carried out. Obtained data show that packing CUB is more effective than the most popular type of structured packing under all other conditions being equal. As experimental data shown heat transfer coefficient was up by 17% and mass transfer coefficient was up by 51%. We found out optimal geometry of cross section of the new packing, namely, number of elements and parameters of one element. The new construction of structured packing is applicable for both type of column cross-section round and square.

  20. Modified strip packing heuristics for the rectangular variable-sized ...

    African Journals Online (AJOL)

    Frank G Ortmann

    Key words: Packing problems, heuristics. 1 Introduction. While cutting and packing (C&P) problems have been studied for many years, e.g. the packing of animals, seafaring vessel, trains and vehicles, these problems have only become an active field of mathematical study since the 1939 landmark paper by Kantorovich [47].

  1. 27 CFR 24.255 - Bottling or packing wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises and...

  2. Peacekeeper ICBM PBPS (Stage IV) Safing and Demilitarization Project

    Science.gov (United States)

    Douglass, James L.

    2014-01-01

    Topics covered include: Overview of White Sands Test Facility (WSTF) and Capabilities. History of the Peacekeeper Intercontinental Ballistic Missile (ICBM) Program. Introduction to Safing & Demilitarization Project. Requirements for Safing Project. Approach Constellation Program. Need for Qualified Flight Hardware to Support Constellation. Ability to Use Peacekeeper Hardware to Support Constellation. Additional Uses for the Peacekeeper Post-Boost Propulsion System (PBPS) Hardware.

  3. Safe corridors for K-wiring in phalangeal fractures

    Directory of Open Access Journals (Sweden)

    C Rex

    2015-01-01

    Conclusion: K-wiring through the safe corridor has proved to yield the best clinical results because of least tethering of soft tissues as evidenced by performing "on-table active finger movement test" at the time of surgery. We strongly recommend K-wiring through safe portals in all phalangeal fractures.

  4. Safe transport of cyanamide.

    Science.gov (United States)

    Wehrstedt, Klaus-Dieter; Wildner, Werner; Güthner, Thomas; Holzrichter, Klaus; Mertschenk, Bernd; Ulrich, Armin

    2009-10-30

    For many years cyanamide (CAS no. 420-04-2) was not commercially available due to its unstable nature. Since about 1965 the former "Süddeutsche Kalkstickstoffwerke AG" (current name: AlzChem Trostberg GmbH) developed a special stabilizing system. It was to be investigated to which Class (e.g. "Corrosive Substances", Class 8) or Division (e.g. "Self-reactive Substances", Division 4.1) of the International Regulations for the Transport of Dangerous Goods cyanamide (pure or as a 50% solution in water) should be assigned and based on this which maximum quantities are allowed to transport e.g. in tanks. Cyanamide is used for the synthesis of pharmaceutical and agrochemical actives, biocides, dyestuffs and fine chemicals. During the last years cyanamide was tested at BAM and AQura. The results and an appraisal are presented in this paper. Thus, cyanamide should be classified according to the UN Recommendations on the Transport of Dangerous Goods in Class 8, UN number 2922 (50% solution in water) and UN number 2923 (pure substance) respectively, packaging group III, danger labels 8+6.1. Cyanamide, 50% solution in water, can be transported in portable tanks under specific conditions.

  5. End-to-End demonstrator of the Safe Affordable Fission Engine (SAFE) 30: Power conversion and ion engine operation

    Science.gov (United States)

    Hrbud, Ivana; van Dyke, Melissa; Houts, Mike; Goodfellow, Keith

    2002-01-01

    The Safe Affordable Fission Engine (SAFE) test series addresses Phase 1 Space Fission Systems issues in particular non-nuclear testing and system integration issues leading to the testing and non-nuclear demonstration of a 400-kW fully integrated flight unit. The first part of the SAFE 30 test series demonstrated operation of the simulated nuclear core and heat pipe system. Experimental data acquired in a number of different test scenarios will validate existing computational models, demonstrated system flexibility (fast start-ups, multiple start-ups/shut downs), simulate predictable failure modes and operating environments. The objective of the second part is to demonstrate an integrated propulsion system consisting of a core, conversion system and a thruster where the system converts thermal heat into jet power. This end-to-end system demonstration sets a precedent for ground testing of nuclear electric propulsion systems. The paper describes the SAFE 30 end-to-end system demonstration and its subsystems. .

  6. ABCD of Safe Dental Practice.

    Science.gov (United States)

    Babu, K Sunil; Reddy B, V Thimma; Reddy, C Pujita; Lalita, Sree

    2011-01-01

    Dental practice is the integral component of the oral health. Though the dental practice is in close relation with that of the medical practice, it has its own distinctiveness in relation to safe practice. The safe dental practice should not only assure good oral and general health but also improve social interaction by enhancing physical appearance, esthetics, etc. For the safe dental practice, dentists must excel in patient care and standard of treatment. The interlocking missions of education, research, and patient care are the cornerstones for the safe and healthy dental practice. This paper is designed to bridge the gap between the educational preparation of the dentist and the reality of the working world in a simple way.

  7. The mechanical behaviour of packed particulates

    Energy Technology Data Exchange (ETDEWEB)

    Dutton, R

    1998-01-01

    Within the Canadian Nuclear Fuel Waste Management program, the central concept is to package used fuel in containers that would be deposited in an underground vault in a plutonic rock formation. To provide internal mechanical support for the container, the reference design specifies it to be filled with a matrix of compacted particulate material (called 'packed particulate'), such as quartz sand granules. The focus of this report is on the mechanical properties of the packed-particulate material, based on information drawn from the extant literature. We first consider the packing density of particulate matrices to minimize the remnant porosity and maximize mechanical stability under conditions of external pressure. Practical methods, involving vibratory packing, are reviewed and recommendations made to select techniques to achieve optimum packing density. The behaviour of particulates under compressive loading has been of interest to the powder metallurgy industry (i.e., the manufacture of products from pressed/sintered metal and ceramic powders) since the early decades of this century. We review the evidence showing that in short timescales, stress induced compaction occurs by particle shuffling and rearrangement, elastic distortion, plastic yielding and microfracturing. Analytical expressions are available to describe these processes in a semiquantitative fashion. Time-dependent compaction, mainly via creep mechanisms, is more complex. Much of the theoretical and experimental information is confined to higher temperatures (> 500 degrees C), where deformation rates are more rapid. Thus, for the relatively low ambient temperatures of the waste container ({approx}100 degrees C), we require analytical techniques to extrapolate the collective particulate creep behaviour. This is largely accomplished by employing current theories of creep deformation, particularly in the form of Deformation Mechanism Maps, which allow estimation of creep rates over a wide

  8. Staying Safe in the Water

    Centers for Disease Control (CDC) Podcasts

    2008-05-15

    In this podcast, Dr. Julie Gilchrist, a pediatrician and medical epidemiologist from CDC’s Injury Center, talks about staying safe in the water. Tips are for all audiences, with a focus on preventing drownings and keeping children safe in and around the pool, lake, or ocean.  Created: 5/15/2008 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 5/19/2008.

  9. Effects of Different Packing Materials on Cotton Fires

    Science.gov (United States)

    Zhou, Yanzhao; Liu, Wanfu; Ni, Zhaopeng; Wang, Lu; Gao, Bo

    2017-12-01

    The aim of this study is to investigate the effects of different packing materials on cotton fires. After the cotton bale is ignited, the caving area, the mass loss rate and the temperature variation of cotton bales were measured. Through the experiment, it was found that Cotton bale packed with Plastic belt has the phenomenon of collapse, but the cotton bale packed with Steel ribbon does not happen to collapse. The mass loss rate of the Cotton bale packed with Plastic belt is faster than that of the cotton bale packed with Steel ribbon, and the temperature is higher.

  10. Numerical Simulation and Experimental Study on Temperature Distribution of Self-Lubricating Packing Rings in Reciprocating Compressors

    Directory of Open Access Journals (Sweden)

    Jia Xiaohan

    2016-01-01

    Full Text Available The nonuniform abrasion failure and high-temperature thermal failure of packing rings have a significant influence on compressor reliability, particularly that of oil-free compressors. In this study, a test rig was constructed to measure the dynamic temperature of packing rings under different operational conditions in an oil-free reciprocating compressor. The dynamic axial and radial temperature distributions of the packing rings were obtained using an innovative internal temperature testing device that kept the thermocouples and packing box relatively static during compressor operation. A three-dimensional heat transfer model was also developed to analyze the temperature distribution of the packing boxes, piston rod, and cylinder during such operation. Good agreement was observed between the simulation results and experimental data, which showed an average relative error of less than 2.35%. The results indicate that the pressure ratio exerts a significant effect on the axial temperature distribution and determines which packing ring reaches the maximum temperature. They also show the average temperature to rise with an increase in the rotational speed and to fall with an improvement in the external cooling conditions. Finally, the material of the packing rings was found to affect the temperature gradient from their inner to outer surface.

  11. Removal of nitrate, ammonia and phosphate from aqueous solutions in packed bed filter using biochar augmented sand media

    Directory of Open Access Journals (Sweden)

    El Hanandeh Ali

    2017-01-01

    Full Text Available Nutrients from wastewater are a major source of pollution because they can cause significant impact on the ecosystem. Accordingly, it is important that the nutrient concentrations are kept to admissible levels to the receiving environment. Often regulatory limits are set on the maximum allowable concentrations in the effluent. Therefore, wastewater must be treated to meet safe levels of discharge. In this study, laboratory investigation of the efficiency of packed bed filters to remove nitrate, ammonium and phosphate from aqueous solutions were conducted. Sand and sand augmented with hydrochloric acid treated biochar (SBC were used as packing media. Synthetic wastewater solution was prepared with PO43−, NO3−, NH4+ concentrations 20, 10, 50 mg/L, respectively. Each experiment ran for a period of five days; samples from the effluent were collected on alternate days. All experiments were duplicated. Over the experiment period, the average removal efficiency of PO43−, NO3−, NH4+ were 99.2%, 72.9%, 96.7% in the sand packed columns and 99.2%, 82.3%, 97.4% in the SBC packed columns, respectively. Although, the presence of biochar in the packing media had little effect on phosphate and ammonium removal, it significantly improved nitrate removal.

  12. Comparisons of ice packs, hot water immersion, and analgesia injection for the treatment of centipede envenomations in Taiwan.

    Science.gov (United States)

    Chaou, Chung-Hsien; Chen, Chian-Kuang; Chen, Jih-Chang; Chiu, Te-Fa; Lin, Chih-Chuan

    2009-08-01

    To compare the effectiveness of ice packs and hot water immersion for the treatment of centipede envenomations. Sixty patients envenomated by centipedes were randomized into three groups and were treated with ice packs, hot water immersion, or analgesia injection. The visual analog score (VAS) for pain was measured before the treatment and 15 min afterward. Demographic data and data on local and systemic effects after centipede bites were collected. The VAS scores and the pain decrease (DeltaVAS) were compared between the three groups. All patients suffered from pain at the affected sites; other local effects included redness (n = 49, 81.7%), swelling (n = 32, 53.3%), heat (n = 14, 23.3%), itchiness (n = 5, 8.3), and bullae formation (n = 3, 5.0%). Rare systemic effects were reported. All three groups had similar VAS scores before and after treatment. They also had similar effectiveness in reducing pain caused by centipedes bites (DeltaVAS = 2.55 +/- 1.88, 2.33 +/- 1.78, and 1.55 +/- 1.68, with ice packs, analgesia, and hot water immersion, respectively, p = 0.165). Ice packs, hot water immersion, and analgesics all improved the pain from centipede envenomation. Ice pack treatment is a safe, inexpensive, and non-invasive method for pre-hospital management in patients with centipede envenomation.

  13. Meal Module, Tray Pack 36-Persons

    Science.gov (United States)

    1987-08-27

    17.50 7.8 0.19 20 Potatoes in 8940-01-152-6821 5.50 7.6 0.19 18 Butter Sauce Green Beans 8915-01-150-2861 7.99 5.0 0.19 25 Apple Dessert 8940-01-147-7855...CUSHIONED HOT SAUCE 8. BOXES OF PEANUT BUTTER PACKETS 9. BOX OF COFFEE PACKETS 10. BOX OF CREAMER PACKETS Figure 10. Meal Module, Tray Pack, 36...listed Condiments (Table A-3) as listed Breakfast 2 Fruit Cocktail w/Syrup 8915-00-286-5482 S Beef Stew 8940-01-009-7993 Mixed Vegetables 8915-01-173-2858

  14. Ideal Clutters That Do Not Pack

    Science.gov (United States)

    2016-09-18

    class of objects, called marginal cuboids, that naturally give rise to ideal non-packing clutters with covering number two. We present an explicit...class of marginal cuboids, and show that the corresponding clutters have one of Q6, Q2,1, Q10 as a minor, where Q6, Q2,1 are known ideal mnp clutters...clutter C0 where τ(C0) = 2, and (iv) C0 is a marginal cuboid. This result is proved in §5. We will define marginal cuboids shortly. Statement (iv

  15. Intrinsic Dispersivity of Randomly Packed Monodisperse Spheres

    Science.gov (United States)

    Scheven, U. M.; Harris, R.; Johns, M. L.

    2007-08-01

    We determine the intrinsic longitudinal dispersivity ld of randomly packed monodisperse spheres by separating the intrinsic stochastic dispersivity ld from dispersion by unavoidable sample dependent flow heterogeneities. The measured ld, scaled by the hydrodynamic radius rh, coincide with theoretical predictions [Saffman, J. Fluid Mech. 7, 194 (1960)JFLSA70022-112010.1017/S0022112060001432] for dispersion in an isotropic random network of identical capillaries of length l and radius a, for l/a=3.82, and with rescaled simulation results [Maier et al., Phys. FluidsPHFLE61070-6631 12, 2065 (2000)10.1063/1.870452].

  16. Extended Kalman Filter with a Fuzzy Method for Accurate Battery Pack State of Charge Estimation

    Directory of Open Access Journals (Sweden)

    Saeed Sepasi

    2015-06-01

    Full Text Available As the world moves toward greenhouse gas reduction, there is increasingly active work around Li-ion chemistry-based batteries as an energy source for electric vehicles (EVs, hybrid electric vehicles (HEVs and smart grids. In these applications, the battery management system (BMS requires an accurate online estimation of the state of charge (SOC in a battery pack. This estimation is difficult, especially after substantial battery aging. In order to address this problem, this paper utilizes SOC estimation of Li-ion battery packs using a fuzzy-improved extended Kalman filter (fuzzy-IEKF for Li-ion cells, regardless of their age. The proposed approach introduces a fuzzy method with a new class and associated membership function that determines an approximate initial value applied to SOC estimation. Subsequently, the EKF method is used by considering the single unit model for the battery pack to estimate the SOC for following periods of battery use. This approach uses an adaptive model algorithm to update the model for each single cell in the battery pack. To verify the accuracy of the estimation method, tests are done on a LiFePO4 aged battery pack consisting of 120 cells connected in series with a nominal voltage of 432 V.

  17. Incorporating rosemary diterpenes in lamb diet to improve microbial quality of meat packed in different environments.

    Science.gov (United States)

    Ortuño, Jordi; Serrano, Rafael; Bañón, Sancho

    2017-09-01

    The dietary use of phytochemicals may contribute to improving lamb meat preservation under different packing atmospheres. The objective was to test the preservative potential of a dietary rosemary extract (RE) containing carnosic acid and carnosol (at 1:1 w:w) in chilled lamb patties packed in air, vacuum and 70/30 O 2 /CO 2 modified atmosphere. Three experimental diets, (C) control, (RE) C plus 600 mg RE/kg feed and (E) C plus 600 mg vitamin E/kg, were given to fattening lambs. Unlike the C- and E-diets, the RE-diet had a double antimicrobial and antioxidant effect on the lamb patties packed in all the environments studied. The RE-diet inhibited total viable and lactic acid bacteria and Enterobacteriaceae, but not Brochothrix thermosphacta and Pseudomonas spp. and also improved oxidative stability (measured as CIE Lab color and thiobarbituric reagent substances), appearance and odor. The E-diet had a better antioxidant effect than the RE-diet but had no antimicrobial effects. Escherichia coli and Salmonella spp. were not detected. The dietary use of RE was most suitable for preserving vacuum-packed meat, which is more exposed to spoilage by anaerobic bacteria, while the use of dietary vitamin E allowed better control of oxidation in the meat packed in a bacteriostatic and oxidizing environment. © 2017 Japanese Society of Animal Science.

  18. The P.E.A.C.E. Pack: A Computerized Online Assessment of School Bullying

    Science.gov (United States)

    Slee, Phillip T.; Mohyla, Jury

    2014-01-01

    School bullying is an international problem with harmful outcomes for those involved. This study describes the design and field testing of an innovative computer-based social learning tool for assessing student perceptions of bullying developed for an Australian intervention program called the P.E.A.C.E. Pack. Students rate their peer group…

  19. Photoionisation detection in packed-capillary liquid and supercritical-fluid chromatography.

    NARCIS (Netherlands)

    Zegers, B.N.; Hessels, R.; Jagesar, J.; Rozenbrand, J.; Lingeman, H.; Brinkman, U.A.T.

    1995-01-01

    A photoionisation detector (PID) was coupled to packed-capillary liquid and supercritical-fluid chromatography to study its performance. Several mobile phases were tested to evaluate the potential of liquid chromatography with photoionisation detection, LC-PID. The behaviour of the PID was not as

  20. Safe and Liquid Mortgage Bonds

    DEFF Research Database (Denmark)

    Dick-Nielsen, Jens; Gyntelberg, Jacob; Lund, Jesper

    eliminates credit risk from the investor's perspective. Similar to other safe bonds, funding liquidity becomes the main driver of mortgage bond liquidity and this creates commonality in liquidity across markets and countries. These findings have implications for how to design a robust mortgage bond system......This paper shows that strict match pass-through funding of covered bonds provides safe and liquid mortgage bonds. Despite a 30% drop in house prices during the 2008 global crisis Danish mortgage bonds remained as liquid as most European government bonds. The Danish pass-through system effectively...... and for the treatment of covered bonds in capital regulation....

  1. Protein packing defects "heat up" interfacial water.

    Science.gov (United States)

    Sierra, María Belén; Accordino, Sebastián R; Rodriguez-Fris, J Ariel; Morini, Marcela A; Appignanesi, Gustavo A; Fernández Stigliano, Ariel

    2013-06-01

    Ligands must displace water molecules from their corresponding protein surface binding site during association. Thus, protein binding sites are expected to be surrounded by non-tightly-bound, easily removable water molecules. In turn, the existence of packing defects at protein binding sites has been also established. At such structural motifs, named dehydrons, the protein backbone is exposed to the solvent since the intramolecular interactions are incompletely wrapped by non-polar groups. Hence, dehydrons are sticky since they depend on additional intermolecular wrapping in order to properly protect the structure from water attack. Thus, a picture of protein binding is emerging wherein binding sites should be both dehydrons rich and surrounded by easily removable water. In this work we shall indeed confirm such a link between structure and dynamics by showing the existence of a firm correlation between the degree of underwrapping of the protein chain and the mobility of the corresponding hydration water molecules. In other words, we shall show that protein packing defects promote their local dehydration, thus producing a region of "hot" interfacial water which might be easily removed by a ligand upon association.

  2. Comparing Electrolytes in Prestorage Leukocyte-Reduced Packed Cell versus Unfiltered Packed Cell.

    Science.gov (United States)

    Fallahi, L; Ghiliyan, R; Hashemi, A; Fatemi, A; Saeedi, M

    2013-01-01

    Blood transfusion is associated with side effects caused by residual leukocytes in blood and blood components. Using leukodepleted blood components can decrease some of these adverse effects. Among the various methods to remove leukocytes in blood components, prestorage leukoreduction has been most efficient, but the evidence of clinical side effects awaits further studies. We evaluated changes of electrolytes in prestorage leukocyte-reduced red blood cells. In this case-control study, one hundred twenty eight packed cells were studied: 64 unfiltered packed cells and 64 prestorage filtered packed cell. Two groups were matched as sex and age. Electrolytes such as Calcium, Sodium, and Potassium of two groups were measured, and compared during preparation. In this study, mean of Calcium in unfiltered and filtered group were 6.16±1.09 mg/dl and 5.57±2.21 mg/dl, respectively (P-valueunfiltered group also was 155.91+/-9.51meq/l and in filtered group, 153.05+/-13.21meq/l (P-valueunfiltered group was 5.01+/-1.72 meq/l and in filtered group, 7.42+/-2.45meq/l (P-value<0.001). Releasing of Potassium during preparation of prestorage leukoreduction can cause increased Potassium level and hemoglobin concentration changes in prestorage filtered packed cell.

  3. Cow preference and usage of free stalls compared with an open pack area.

    Science.gov (United States)

    Fregonesi, J A; von Keyserlingk, M A G; Weary, D M

    2009-11-01

    Free-stall housing systems are designed to provide a comfortable and hygienic lying area, but some aspects of stall design may restrict usage by cows. The aim of this study was to compare free-stall housing with a comparable lying area (open pack) without stall partitions. We predicted that cows would spend more time lying down and standing in the bedded area when provided access to an open pack than when in free stalls. We also predicted that cows would spend less time standing outside of the lying area and less time perching with the front 2 hooves in the lying area when using the open pack. Groups (n = 8) of 12 cows each were provided access to either the open pack or stalls. After a 7-d adaptation period, each group was tested sequentially in the 2 treatments for 3 d each. This no-choice phase was followed by an 8-d choice phase during which cows had simultaneous access to both treatments. During the no-choice phase, cows spent more time lying down (13.03 +/- 0.24 vs. 12.48 +/- 0.24 h/d) and standing with all 4 hooves in the bedded area (0.96 +/- 0.12 vs. 0.41 +/- 0.12 h/d) of the open pack than in the stalls. During the choice phase, cows spent more time lying down (7.20 +/- 0.29 vs. 5.86 +/- 0.29 h/d) and standing with all 4 hooves in the bedded area (0.58 +/- 0.07 vs. 0.12 +/- 0.07 h/d) of the open pack than in the stalls. In both the no-choice (1.66 +/- 0.24 vs. 0.55 +/- 0.24 h/d) and choice (0.55 +/- 0.07 vs. 0.29 +/- 0.07 h/d) phases, cows spent more time standing with just 2 hooves in the stalls than in the open pack. In conclusion, cows spent more time lying and standing with all 4 hooves in the bedded open pack than in the stalls. Additionally, cows spent more time standing in the alley and standing with just the front 2 hooves on the bedding in the stalls than in the bedded open pack; increased standing time on wet concrete is a known risk factor for lameness.

  4. Application of cabbage leaves compared to gel packs for mothers with breast engorgement: Randomised controlled trial.

    Science.gov (United States)

    Wong, Boh Boi; Chan, Yiong Huak; Leow, Mabel Qi He; Lu, Yi; Chong, Yap Seng; Koh, Serena Siew Lin; He, Hong-Gu

    2017-11-01

    The effects of cold cabbage leaves and cold gel packs on breast engorgement management have been inconclusive. No studies have compared the effects of these methods on breast engorgement using a rigorous design. To examine the effectiveness of cold cabbage leaves and cold gel packs application on pain, hardness, and temperature due to breast engorgement, the duration of breastfeeding and satisfaction. A randomised controlled three-group pre-test and repeated post-test study. A private maternal and children's hospital in Singapore. Mothers (n=227) with breast engorgement within 14days after delivery. The mothers were randomly assigned into either cold cabbage leaves, cold gel packs, or the control group. Pain, hardness of breasts, and body temperature were measured before treatment. Two sets of post-test assessments were conducted at 30min, 1h, and 2h after the first and second application. The duration of breastfeeding was measured up to 6 months. IBM SPSS 23.0 was used to analyse the data. Mothers in the cabbage leaves and gel packs groups had significant reductions in pain at all post-intervention time points compared to the control group, starting from 30min after the first application of cabbage leaves (mean difference=-0.38, p=0.016) or gel packs (mean difference=-0.39, p=0.013). When compared to the control group, mothers in the cabbage leaves group had significant reductions in the hardness of breasts at all post-intervention time points, and mothers in the gel packs group had significant reductions in the hardness of breasts at two time points (1h and 2h after the first and second application, respectively). Mothers in the cabbage leaves group had significant reductions in pain (mean difference=-0.53, p=0.005) and hardness of breasts (mean difference=-0.35, p=0.003) at 2h after the second application compared to those in the gel packs group. Both interventions had no impact on body temperature. There was no significant difference in the durations of

  5. Thermodynamics of asymptotically safe theories

    DEFF Research Database (Denmark)

    Rischke, Dirk H.; Sannino, Francesco

    2015-01-01

    We investigate the thermodynamic properties of a novel class of gauge-Yukawa theories that have recently been shown to be completely asymptotically safe, because their short-distance behaviour is determined by the presence of an interacting fixed point. Not only do all the coupling constants freeze...

  6. Staying Safe on the Water

    Centers for Disease Control (CDC) Podcasts

    2008-06-05

    In this podcast for all audiences, Dr. Julie Gilchrist from CDC's Injury Center outlines tips for safe boating.  Created: 6/5/2008 by National Center for Injury Prevention and Control (NCIPC).   Date Released: 6/8/2008.

  7. Baby Sling: Is It Safe?

    Science.gov (United States)

    ... safe. In: Caring for Your Baby and Young Child: Birth to Age 5. 6th ed. New York, N.Y.: Bantam Books; 2014. Goldenberg RL, et al. Low birth weight in the United States. American Journal of Clinical Nutrition. 2007;85:584S. Jana ...

  8. Flywheel Rotor Safe-Life Technology

    Science.gov (United States)

    Ratner, J. K. H.; Chang, J. B.; Christopher, D. A.; McLallin, Kerry L. (Technical Monitor)

    2002-01-01

    Since the 1960s, research has been conducted into the use of flywheels as energy storage systems. The-proposed applications include energy storage for hybrid and electric automobiles, attitude control and energy storage for satellites, and uninterruptible power supplies for hospitals and computer centers. For many years, however, the use of flywheels for space applications was restricted by the total weight of a system employing a metal rotor. With recent technological advances in the manufacturing of composite materials, however, lightweight composite rotors have begun to be proposed for such applications. Flywheels with composite rotors provide much higher power and energy storage capabilities than conventional chemical batteries. However, the failure of a high speed flywheel rotor could be a catastrophic event. For this reason, flywheel rotors are classified by the NASA Fracture Control Requirements Standard as fracture critical parts. Currently, there is no industry standard to certify a composite rotor for safe and reliable operation forth( required lifetime of the flywheel. Technical problems hindering the development of this standard include composite manufacturing inconsistencies, insufficient nondestructive evaluation (NDE) techniques for detecting defects and/or impact damage, lack of standard material test methods for characterizing composite rotor design allowables, and no unified proof (over-spin) test for flight rotors. As part of a flywheel rotor safe-life certification pro-ram funded b the government, a review of the state of the art in composite rotors is in progress. The goal of the review is to provide a clear picture of composite flywheel rotor technologies. The literature review has concentrated on the following topics concerning composites and composite rotors: durability (fatigue) and damage tolerance (safe-life) analysis/test methods, in-service NDE and health monitoring techniques, spin test methods/ procedures, and containment options

  9. Low density gravel substitute gravel pack in Marlim

    Energy Technology Data Exchange (ETDEWEB)

    Albino, E.

    1996-12-31

    Successful gravel pack completion means optimization of production. This has been PETROBRAS` task regarding completion of the giant Marlim field. Significant improvement have been noticed recently with the introduction of techniques such as horizontal drilling, frac pack and low density gravel substitute gravel pack. This paper discusses the introduction and results of the system, its advantages and trends since this technique can become an excellent alternative when a more aggressive technique is no economical. (author). 5 refs., 4 figs.

  10. Packed bed carburization of tantalum and tantalum alloy

    Science.gov (United States)

    Lopez, P.C.; Rodriguez, P.J.; Pereyra, R.A.

    1999-06-29

    Packed bed carburization of a tantalum or tantalum alloy object is disclosed. A method for producing corrosion-resistant tantalum or tantalum alloy objects is described. The method includes the steps of placing the object in contact with a carburizing pack, heating the packed object in vacuum furnace to a temperature whereby carbon from the pack diffuses into the object forming grains with tantalum carbide along the grain boundaries, and etching the surface of the carburized object. This latter step removes tantalum carbides from the surface of the carburized tantalum object while leaving the tantalum carbide along the grain boundaries. 4 figs.

  11. Reviews Book: Big Ben Book: Mini Weapons of Mass Destruction Equipment: Waves and Radiation Sample Pack Book: The Exploratorium Science Snackbook Book: Super Structures Book: The Universe and the Atom

    Science.gov (United States)

    2010-11-01

    WE RECOMMEND Mini Weapons of Mass Destruction A pictorial guide to making safe mini weapons Waves and Radiation Sample Pack Pack shines light on the electromagnetic spectrum The Exploratorium Science Snackbook Book is full of ideas for fascinating physics demonstrations Super Structures The science of bridges, buildings, dams and engineering WORTH A LOOK Big Ben The physics of the world-famous clock The Universe and the Atom A comprehensive guide to physics

  12. High-resolution of particle contacts via fluorophore exclusion in deep-imaging of jammed colloidal packings

    Science.gov (United States)

    Kyeyune-Nyombi, Eru; Morone, Flaviano; Liu, Wenwei; Li, Shuiqing; Gilchrist, M. Lane; Makse, Hernán A.

    2018-01-01

    Understanding the structural properties of random packings of jammed colloids requires an unprecedented high-resolution determination of the contact network providing mechanical stability to the packing. Here, we address the determination of the contact network by a novel strategy based on fluorophore signal exclusion of quantum dot nanoparticles from the contact points. We use fluorescence labeling schemes on particles inspired by biology and biointerface science in conjunction with fluorophore exclusion at the contact region. The method provides high-resolution contact network data that allows us to measure structural properties of the colloidal packing near marginal stability. We determine scaling laws of force distributions, soft modes, correlation functions, coordination number and free volume that define the universality class of jammed colloidal packings and can be compared with theoretical predictions. The contact detection method opens up further experimental testing at the interface of jamming and glass physics.

  13. Packing of ganglioside-phospholipid monolayers

    DEFF Research Database (Denmark)

    Majewski, J.; Kuhl, T.L.; Kjær, K.

    2001-01-01

    Using synchrotron grazing-incidence x-ray diffraction (GIXD) and reflectivity, the in-plane and out-of-plane structure of mixed ganglioside-phospholipid monolayers was investigated at the air-water interface. Mixed monolayers of 0, 5, 10, 20, and 100 mol% ganglioside GM, and the phospholipid...... dipaimitoylphosphatidylethanolamine (DPPE) were studied in the solid phase at 23 degreesC and a surface pressure of 45 mN/m. At these concentrations and conditions the two components do not phase-separate and no evidence for domain formation was observed. X-ray scattering measurements reveal that GM, is accommodated within the host...... polymer groups. Indeed, the lack of packing disruptions by the oligosaccharide groups indicates that protein-GM, interactions, including binding, insertion, chain fluidization, and domain formation (lipid rafts), can be studied in 2-D monolayers using scattering techniques....

  14. Slow creep in soft granular packings.

    Science.gov (United States)

    Srivastava, Ishan; Fisher, Timothy S

    2017-05-14

    Transient creep mechanisms in soft granular packings are studied numerically using a constant pressure and constant stress simulation method. Rapid compression followed by slow dilation is predicted on the basis of a logarithmic creep phenomenon. Characteristic scales of creep strain and time exhibit a power-law dependence on jamming pressure, and they diverge at the jamming point. Microscopic analysis indicates the existence of a correlation between rheology and nonaffine fluctuations. Localized regions of large strain appear during creep and grow in magnitude and size at short times. At long times, the spatial structure of highly correlated local deformation becomes time-invariant. Finally, a microscale connection between local rheology and local fluctuations is demonstrated in the form of a linear scaling between granular fluidity and nonaffine velocity.

  15. School meal sociality or lunch pack individualism?

    DEFF Research Database (Denmark)

    Andersen, Sidse Schoubye; Holm, Lotte; Baarts, Charlotte

    2015-01-01

    the social life of a school class, and how these arrangements involve strategies of both inclusion and exclusion. Two types of school meals are compared in the intervention study: a hot meal based on Nordic ingredients and the normal Danish school meal arrangement in which children bring lunch packs......The present article specifies and broadens our understanding of the concept of commensality by investigating what it means to ‘share a meal’. The study utilizes a school meal intervention carried out in Denmark in 2011/2012. It shows how different types of school meal arrangement influence...... to school. The study discusses commensality by examining and comparing lunchtime interactions within the same group of children in the two contrasting meal situations. The results fail to confirm the conventional view that shared meals have greater social impacts and benefits than eating individualized...

  16. Measurement Approach of Mean Heat Transfer Coefficient for Packed Bed of Vegetables

    Directory of Open Access Journals (Sweden)

    Łapiński Adam

    2017-03-01

    Full Text Available The non-invasive measurement approach of the mean heat transfer coefficient for the packed bed of vegetables may be thought as still open issue. There is a clear need for the assessment of heat transfer conditions for various types of fruits and vegetables in order to accurately predict the thermal load that is necessary to select refrigeration equipment for cold storage chamber. Additionally, there is significant development in numerical modelling of heat and mass transfer processes in cold storage chambers for fruits and vegetables which requires precise heat transfer prediction. The theoretical basis for the indirect measurement approach of mean heat transfer coefficient for the packed bed of vegetables that is based on single blow technique is presented and discussed in the paper. The approach based on the modified model of Liang and Yang was presented and discussed. The testing stand consisted of a dedicated experimental tunnel along with auxiliary equipment and measurement system are presented. The geometry of the tested vegetables bed were presented. Selected experimental results of heat transfer are presented and discussed for the packed bed of carrots. These results were presented as dimensionless relationship. The obtained results were compared with the existing dimensionless relationships developed for the packed bed consisting of elements of various regular shapes.

  17. Brittleness and Packing Density Effects on Blast-hole Cuttings Yield of Selected Rocks

    Directory of Open Access Journals (Sweden)

    B. Adebayo

    2016-06-01

    Full Text Available This paper evaluates brittleness and packing density to analysis their effects on blast-hole cutting yield for three selected rocks in Nigeria. Brittleness test (S20 was carried out in accordance with Norwegian Soil and Rock Engineering and the Brittleness Index (BI for the selected rocks were estimated. The packing density determined from the photomicrograph of the rock samples. The grain size of 45 blast-holes drill cuttings collected from three selected while drilling of these rocks were determined using standard method of America Society for Testing and Materials (ASTM D 2487. The brittleness values are 50%, 44% and 42% for micro granite, porphyritic granite and medium biotite granite respectively. The result of BI varied from 10.32 – 11.59 and they are rated as moderately brittle rocks. The values of packing density varied from 92.20 – 94.55%, 91.00 -92.96% and 92.92 – 94.96% for all the rocks. The maximum weights of blast-hole particle size retained at 75 µm are 106.00g, 103.28 g and 99.76 g for medium biotite granite, micro granite and porhyritic granite respectively. Packing density values have correlation to some extent with (S20 values hence, this influence the yield of blast-hole cuttings as drilling progresses. The minimum weight of blast-hole cuttings particle size retained at 150 µm agrees with brittleness index classification for micro granite.

  18. Safe Distribution of Declarative Processes

    DEFF Research Database (Denmark)

    Hildebrandt, Thomas; Mukkamala, Raghava Rao; Slaats, Tijs

    2011-01-01

    process model generalizing labelled prime event structures to a systems model able to finitely represent ω-regular languages. An operational semantics given as a transition semantics between markings of the graph allows DCR Graphs to be conveniently used as both specification and execution model......We give a general technique for safe distribution of a declarative (global) process as a network of (local) synchronously communicating declarative processes. Both the global and local processes are given as Dynamic Condition Response (DCR) Graphs. DCR Graphs is a recently introduced declarative....... The technique for distribution is based on a new general notion of projection of DCR Graphs relative to a subset of labels and events identifying the set of external events that must be communicated from the other processes in the network in order for the distribution to be safe.We prove that for any vector...

  19. Inflation from Asymptotically Safe Theories

    DEFF Research Database (Denmark)

    Nielsen, Niklas Grønlund; Sannino, Francesco; Svendsen, Ole

    2015-01-01

    We investigate models in which inflation is driven by an ultraviolet safe and interacting scalar sector stemming from a new class of nonsupersymmetric gauge field theories. These new theories, differently from generic scalar models, are well defined to arbitrary short distances because of the exi......We investigate models in which inflation is driven by an ultraviolet safe and interacting scalar sector stemming from a new class of nonsupersymmetric gauge field theories. These new theories, differently from generic scalar models, are well defined to arbitrary short distances because...... for inflation. In the minimal coupling case the theory requires large non-perturbative quantum corrections to the quantum potential for the theory to agree with data, while in the non- minimal coupling case the perturbative regime in the couplings of the theory is preferred. Requiring the theory to reproduce...

  20. Sound Packing DNA: packing open circular DNA with low-intensity ultrasound

    Science.gov (United States)

    Park, Donghee; Jung, Bong-Kwang; Park, Hyunjin; Lee, Hyungbeen; Lee, Gyudo; Park, Jingam; Shin, Unchul; Won, Jong Ho; Jo, Yong Jun; Chang, Jin Woo; Lee, Sangwoo; Yoon, Daesung; Seo, Jongbum; Kim, Chul-Woo

    2015-04-01

    Supercoiling DNA (folding DNA into a more compact molecule) from open circular forms requires significant bending energy. The double helix is coiled into a higher order helix form; thus it occupies a smaller footprint. Compact packing of DNA is essential to improve the efficiency of gene delivery, which has broad implications in biology and pharmaceutical research. Here we show that low-intensity pulsed ultrasound can pack open circular DNA into supercoil form. Plasmid DNA subjected to 5.4 mW/cm2 intensity ultrasound showed significant (p-values DNA without exposure to ultrasound. Radiation force induced from ultrasound and dragging force from the fluid are believed to be the main factors that cause supercoiling. This study provides the first evidence to show that low-intensity ultrasound can directly alter DNA topology. We anticipate our results to be a starting point for improved non-viral gene delivery.

  1. Transfer pricing and safe harbours

    Directory of Open Access Journals (Sweden)

    Veronika Solilová

    2013-01-01

    Full Text Available Transfer prices are significant for both taxpayers and tax administrations because they determine in large part taxable profits of associated enterprises in different tax jurisdictions. Moreover, in the context of taxation, transfer prices must be complied with the arm’s length principle. However, Multinational Enterprises have been faced daily by conflicting rules and approaches to applying the arm’s length principle, burdensome documentation requirements, inconsistent audit standards and unpredictable competent authority outcomes. Therefore, the Committee on Fiscal Affairs launched another project on the administrative aspects of transfer pricing in 2010. On 16 May 2013 as a partial solution of this project was approved by the OECD Council the Revised Section E on Safe Harbours in Chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities. The paper is focused on significant changes of newly approved chapter IV of the Transfer Pricing Guidelines for Multinational Enterprises and Tax Authorities, further on analysis of practice in this area, on advantages and disadvantages of safe harbours for taxpayers and competent authorities with aim to suggest recommendations on use of safe harbours in the Czech Republic.

  2. Measured Black Carbon Deposition on the Sierra Nevada Snow Pack and Implication for Snow Pack Retreat

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, O.L.; Corrigan, C.E.; Kirchstetter, T.W.; Cliff, S.S.; Ramanathan, V.

    2010-01-12

    Modeling studies show that the darkening of snow and ice by black carbon deposition is a major factor for the rapid disappearance of arctic sea ice, mountain glaciers and snow packs. This study provides one of the first direct measurements for the efficient removal of black carbon from the atmosphere by snow and its subsequent deposition to the snow packs of California. The early melting of the snow packs in the Sierras is one of the contributing factors to the severe water problems in California. BC concentrations in falling snow were measured at two mountain locations and in rain at a coastal site. All three stations reveal large BC concentrations in precipitation, ranging from 1.7 ng/g to 12.9 ng/g. The BC concentrations in the air after the snow fall were negligible suggesting an extremely efficient removal of BC by snow. The data suggest that below cloud scavenging, rather than ice nuclei, was the dominant source of BC in the snow. A five-year comparison of BC, dust, and total fine aerosol mass concentrations at multiple sites reveals that the measurements made at the sampling sites were representative of large scale deposition in the Sierra Nevada. The relative concentration of iron and calcium in the mountain aerosol indicates that one-quarter to one-third of the BC may have been transported from Asia.

  3. New series of paper pack vending machines; Paper pack jido hanbaiki no shin series

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, M. [Fuji Denki Reiki Co. Ltd., Tokyo (Japan); Umino, S. [Fuji Electric Co. Ltd., Tokyo (Japan)

    1996-07-10

    This paper presents series of paper pack vending machines. These machines may be broadly classified into those of cold drinks and of hot and cold drinks depending on the storage temperature of products. The former is the machine for cooling dairy products at 10{degree}C with a combined stacking by direct-stacked racks and chain-multiracks. The latter is provided with divided storing chambers with each chamber selectively cooled or heated. Products in the hot chamber are canned coffee and the like set at 55{degree}C. The temperature control is performed by a microcomputer. The chain-multiracks are provided with advantages such as capability of handling various kinds of container shapes, storing drinks and foods vertically, replacing products by the change of a shelf attachment with one operation, and storing one liter packs by setting pair columns. The direct-stacked racks are provided with advantages such as versatility of handling various kinds of containers and miniaturization of the mechanism other than the storage part. The installation space was reduced by devising the opening and closing of the door. The control part is capable of setting temperatures differently for cans and paper packs. 7 figs., 1 tab.

  4. Measured black carbon deposition on the Sierra Nevada snow pack and implication for snow pack retreat

    Directory of Open Access Journals (Sweden)

    O. L. Hadley

    2010-08-01

    Full Text Available Modeling studies show that the darkening of snow and ice by black carbon deposition is a major factor for the rapid disappearance of arctic sea ice, mountain glaciers and snow packs. This study provides one of the first direct measurements for the efficient removal of black carbon from the atmosphere by snow and its subsequent deposition to the snow packs of California. The early melting of the snow packs in the Sierras is one of the contributing factors to the severe water problems in California. BC concentrations in falling snow were measured at two mountain locations and in rain at a coastal site. All three stations reveal large BC concentrations in precipitation, ranging from 1.7 ng/g to 12.9 ng/g. The BC concentrations in the air after the snow fall were negligible suggesting an extremely efficient removal of BC by snow. The data suggest that below cloud scavenging, rather than ice nuclei, was the dominant source of BC in the snow. A five-year comparison of BC, dust, and total fine aerosol mass concentrations at multiple sites reveals that the measurements made at the sampling sites were representative of large scale deposition in the Sierra Nevada. The relative concentration of iron and calcium in the mountain aerosol indicates that one-quarter to one-third of the BC may have been transported from Asia.

  5. Complexity in Surfaces of Densest Packings for Families of Polyhedra

    Directory of Open Access Journals (Sweden)

    Elizabeth R. Chen

    2014-02-01

    Full Text Available Packings of hard polyhedra have been studied for centuries due to their mathematical aesthetic and more recently for their applications in fields such as nanoscience, granular and colloidal matter, and biology. In all these fields, particle shape is important for structure and properties, especially upon crowding. Here, we explore packing as a function of shape. By combining simulations and analytic calculations, we study three two-parameter families of hard polyhedra and report an extensive and systematic analysis of the densest known packings of more than 55 000 convex shapes. The three families have the symmetries of triangle groups (icosahedral, octahedral, tetrahedral and interpolate between various symmetric solids (Platonic, Archimedean, Catalan. We find optimal (maximum packing-density surfaces that reveal unexpected richness and complexity, containing as many as 132 different structures within a single family. Our results demonstrate the importance of thinking about shape not as a static property of an object, in the context of packings, but rather as but one point in a higher-dimensional shape space whose neighbors in that space may have identical or markedly different packings. Finally, we present and interpret our packing results in a consistent and generally applicable way by proposing a method to distinguish regions of packings and classify types of transitions between them.

  6. The sintering behavior of close-packed spheres

    DEFF Research Database (Denmark)

    Bjørk, Rasmus; Tikare, V.; Frandsen, Henrik Lund

    2012-01-01

    The sintering behavior of close-packed spheres is investigated using a numerical model. The investigated systems are the body-centered cubic (bcc), face-centered cubic (fcc) and hexagonal close-packed spheres (hcp). The sintering behavior is found to be ideal, with no grain growth until full...

  7. The performance of structured packings in trickle-bed reactors.

    NARCIS (Netherlands)

    Frank, M.J.W.; Frank, M.J.W.; Kuipers, J.A.M.; Versteeg, Geert; van Swaaij, Willibrordus Petrus Maria

    1999-01-01

    An experimental study was carried out to investigate whether the use of structured packings might improve the mass transfer characteristics and the catalyst effectiveness of a trickle-bed reactor. Therefore, the performances of a structured packing, consisting of KATAPAK elements, and a dumped

  8. The Performance of Structured Packings in Trickle-Bed Reactors

    NARCIS (Netherlands)

    Frank, M.J.W.; Kuipers, J.A.M.; Versteeg, G.F.; Swaaij, W.P.M. van

    1999-01-01

    An experimental study was carried out to investigate whether the use of structured packings might improve the mass transfer characteristics and the catalyst effectiveness of a trickle-bed reactor. Therefore, the performances of a structured packing, consisting of KATAPAK elements, and a dumped

  9. Softening of stressed granular packings with resonant sound waves.

    Science.gov (United States)

    Reichhardt, C J Olson; Lopatina, L M; Jia, X; Johnson, P A

    2015-08-01

    We perform numerical simulations of a two-dimensional bidisperse granular packing subjected to both a static confining pressure and a sinusoidal dynamic forcing applied by a wall on one edge of the packing. We measure the response experienced by a wall on the opposite edge of the packing and obtain the resonant frequency of the packing as the static or dynamic pressures are varied. Under increasing static pressure, the resonant frequency increases, indicating a velocity increase of elastic waves propagating through the packing. In contrast, when the dynamic amplitude is increased for fixed static pressure, the resonant frequency decreases, indicating a decrease in the wave velocity. This occurs both for compressional and for shear dynamic forcing and is in agreement with experimental results. We find that the average contact number Zc at the resonant frequency decreases with increasing dynamic amplitude, indicating that the elastic softening of the packing is associated with a reduced number of grain-grain contacts through which the elastic waves can travel. We image the excitations created in the packing and show that there are localized disturbances or soft spots that become more prevalent with increasing dynamic amplitude. Our results are in agreement with experiments on glass bead packings and earth materials such as sandstone and granite and may be relevant to the decrease in elastic wave velocities that has been observed to occur near fault zones after strong earthquakes, in surficial sediments during strong ground motion, and in structures during earthquake excitation.

  10. Evaluation of microbial quality of selected blister-packed ...

    African Journals Online (AJOL)

    Ten brands of blister-packed paracetamol tablet and twenty brands of paracetamol syrup marketed in Nigeria were evaluated for their microbial quality. While no microbial contaminant was isolated from all blistered-packed paracetamol tablets, ten of syrups were contaminated with organisms such as Escherichia coli, ...

  11. demonstrating close-packing of atoms using spherical bubble gums

    African Journals Online (AJOL)

    Admin

    chemistry and junior inorganic chemistry courses. However, the subject of three dimen- sional close-packing of atoms has always been difficult for students to understand. In particular, students find it difficult to visualize the packing of atoms in different layers. They cannot clearly identify tetrahedral and octahedral holes, and.

  12. CoolPack – Simulation tools for refrigeration systems

    DEFF Research Database (Denmark)

    Jakobsen, Arne; Rasmussen, Bjarne D.; Andersen, Simon Engedal

    1999-01-01

    from www.et.dtu.dk/coolpack. Users without access to the Internet can contact Team CoolPack by using the address stated in the last paragraph.The purpose of this article is twofold: Introduction to the use of CoolPack and presentation of some of the related technical issues of modelling and layout...

  13. 76 FR 251 - Country of Origin Labeling of Packed Honey

    Science.gov (United States)

    2011-01-04

    ... Service 7 CFR Part 52 RIN 0581-AC89 Country of Origin Labeling of Packed Honey AGENCY: Agricultural..., establishing new regulations addressing country of origin labeling for packed honey bearing any official USDA... service for honey if country of origin labeling requirements are not met for packages of honey containing...

  14. Characteristics of illegal and legal cigarette packs sold in Guatemala.

    Science.gov (United States)

    Arevalo, Rodrigo; Corral, Juan E; Monzon, Diego; Yoon, Mira; Barnoya, Joaquin

    2016-11-25

    Guatemala, as a party to the Framework Convention on Tobacco Control (FCTC), is required to regulate cigarette packaging and labeling and eliminate illicit tobacco trade. Current packaging and labeling characteristics (of legal and illegal cigarettes) and their compliance with the FCTC is unknown. We sought to analyze package and label characteristics of illegal and legal cigarettes sold in Guatemala. We visited the 22 largest traditional markets in the country to purchase illegal cigarettes. All brands registered on tobacco industry websites were purchased as legal cigarettes. Analysis compared labeling characteristics of illegal and legal packs. Most (95%) markets and street vendors sold illegal cigarettes; 104 packs were purchased (79 illegal and 25 legal). Ten percent of illegal and none of the legal packs had misleading terms. Half of the illegal packs had a warning label covering 26 to 50% of the pack surface. All legal packs had a label covering 25% of the surface. Illegal packs were more likely to have information on constituents and emissions (85% vs. 45%, p illegal nor legal cigarette packs comply with FCTC labeling mandates. Urgent implementation and enforcement of the FCTC is necessary to halt the tobacco epidemic.

  15. Nutritional Contents of Lunch Packs of Primary School Children in ...

    African Journals Online (AJOL)

    Background: Lunch packs play a significant role in the nutritional status and academic performance of school children. Available data show a high prevalence of malnutrition among school‑age children. Aims: The aim of this study is to document the nutritional contents of lunch packs of primary school children in Nnewi, ...

  16. demonstrating close-packing of atoms using spherical bubble gums

    African Journals Online (AJOL)

    Admin

    ABSTRACT: In this paper, the use of spherical bubble gums (Gum Balls) to demonstrate the close-packing of atoms and ions is presented. Spherical bubble gums having distinctive colours were used to illustrate the different layers in variety of crystalline packing and the formation of tetrahedral and octahedral holes.

  17. Nutritional Contents of Lunch Packs of Primary School Children in ...

    African Journals Online (AJOL)

    range of nutrients, a child needs to consume a good variety of foods from different food groups, every day and in the right proportions.[6] Packing adequate meals including fruits and. Nutritional Contents of Lunch Packs of Primary. School Children in Nnewi, Nigeria. Ugochukwu EF, Onubogu CU, Edokwe ES, Okeke KN.

  18. Effects on Packed Cell Volume and Parasitic Worm Load from ...

    African Journals Online (AJOL)

    One of the consequences of parasitic worm infestation in children is anaemia which is objectively measured by estimating the packed cell volume. This study carried out through four months was to examine the effects, (on packed cell volume and parasitic worm load) of de-worming pupils of a primary school in Rivers State.

  19. Improved Erythrocyte Osmotic Fragility and Packed Cell Volume ...

    African Journals Online (AJOL)

    Improved Erythrocyte Osmotic Fragility and Packed Cell Volume following administration of Aloe barbadensis Juice Extract in Rats. ... Abstract. Aloe barbadensis is a popular house plant that has a long history of a multipurpose folk remedy. ... Keywords: osmotic fragility, packed cell volume, haemoglobin, Aloe vera ...

  20. Experimental validation of packed bed chemical-looping combustion

    NARCIS (Netherlands)

    Noorman, S.; van Sint Annaland, M.; Kuipers, J.A.M.

    2010-01-01

    Chemical-looping combustion has emerged as a promising alternative technology, intrinsically integrating CO2 capture in power production. A novel reactor concept based on dynamically operated packed beds has been proposed [Noorman, S., van Sint Annaland, M., Kuipers, J.A.M., 2007. Packed bed reactor

  1. An efficient block-discriminant identification of packed malware

    Indian Academy of Sciences (India)

    Extracting original payload by executing packed file in virtual environment requires resources and is prone to ... To create these environments, numerous virtual or sandboxing frameworks are .... ESCAPE utilizes blockwise entropy values and PEAL uses learning algorithm for discriminat- ing packed or native binaries.

  2. Packing of nonoverlapping cubic particles: Computational algorithms and microstructural characteristics

    Science.gov (United States)

    Malmir, Hessam; Sahimi, Muhammad; Tabar, M. Reza Rahimi

    2016-12-01

    Packing of cubic particles arises in a variety of problems, ranging from biological materials to colloids and the fabrication of new types of porous materials with controlled morphology. The properties of such packings may also be relevant to problems involving suspensions of cubic zeolites, precipitation of salt crystals during CO2 sequestration in rock, and intrusion of fresh water in aquifers by saline water. Not much is known, however, about the structure and statistical descriptors of such packings. We present a detailed simulation and microstructural characterization of packings of nonoverlapping monodisperse cubic particles, following up on our preliminary results [H. Malmir et al., Sci. Rep. 6, 35024 (2016), 10.1038/srep35024]. A modification of the random sequential addition (RSA) algorithm has been developed to generate such packings, and a variety of microstructural descriptors, including the radial distribution function, the face-normal correlation function, two-point probability and cluster functions, the lineal-path function, the pore-size distribution function, and surface-surface and surface-void correlation functions, have been computed, along with the specific surface and mean chord length of the packings. The results indicate the existence of both spatial and orientational long-range order as the the packing density increases. The maximum packing fraction achievable with the RSA method is about 0.57, which represents the limit for a structure similar to liquid crystals.

  3. [Stability of oral rehydration solutions in various packing materials].

    Science.gov (United States)

    Santoro, M I; Hackmann, E R; Moudatsos, K M

    1993-10-01

    The aim of this research was to provide data to select an ideal packing material to preserve the integrity of oral rehydration salts (ORS), a therapeutic formulation that is essential in developing countries. Previous research had verified that water is the factor that most affects ORS stability. For this research, a pharmaceutical industry prepared an ORS batch that was packed in six different types of packing materials. The humidity determination was made after storage of samples during 36 weeks at room temperature, at room temperature with 76% relative humidity, and at 40 degrees C with 80% relative humidity. The moisture in the samples was measured at pre-determined intervals using methods like loss on drying at 50 degrees C and the Karl Fischer method. The results indicated that the most efficient packing material was composed of 18g polyester, 35 g aluminum, and 50 g polyethylene (packing material no. 6).

  4. Numerical optimization method for packing regular convex polygons

    Science.gov (United States)

    Galiev, Sh. I.; Lisafina, M. S.

    2016-08-01

    An algorithm is presented for the approximate solution of the problem of packing regular convex polygons in a given closed bounded domain G so as to maximize the total area of the packed figures. On G a grid is constructed whose nodes generate a finite set W on G, and the centers of the figures to be packed can be placed only at some points of W. The problem of packing these figures with centers in W is reduced to a 0-1 linear programming problem. A two-stage algorithm for solving the resulting problems is proposed. The algorithm finds packings of the indicated figures in an arbitrary closed bounded domain on the plane. Numerical results are presented that demonstrate the effectiveness of the method.

  5. Preventing thermal runaway propagation in lithium ion battery packs using a phase change composite material: An experimental study

    Science.gov (United States)

    Wilke, Stephen; Schweitzer, Ben; Khateeb, Siddique; Al-Hallaj, Said

    2017-02-01

    The safety issues of lithium ion batteries pose ongoing challenges as the market for Li-ion technology continues to grow in personal electronics, electric mobility, and stationary energy storage. The severe risks posed by battery thermal runaway necessitate safeguards at every design level - from materials, to cell construction, to module and pack assembly. One promising approach to pack thermal management is the use of phase change composite materials (PCC™), which offer passive protection at low weight and cost while minimizing system complexity. We present experimental nail penetration studies on a Li-ion pack for small electric vehicles, designed with and without PCC, to investigate the effectiveness of PCC thermal management for preventing propagation when a single cell enters thermal runaway. The results show that when parallel cells short-circuit through the penetrated cell, the packs without PCC propagate fully while those equipped with PCC show no propagation. In cases where no external short circuits occur, packs without PCC sometimes propagate, but not consistently. In all test conditions, the use of PCC lowers the maximum temperature experienced by neighboring cells by 60 °C or more. We also elucidate the propagation sequence and aspects of pack failure based on cell temperature, voltage, and post-mortem data.

  6. SEPTOPLASTY WITH AND WITHOUT NASAL PACKING: A COMPARATIVE STUDY

    Directory of Open Access Journals (Sweden)

    Mitta

    2016-05-01

    Full Text Available Septoplasty is one of the most commonly performed surgeries in rhinology to relieve nasal obstruction of patients with distortion in the midline cartilage or septum of the nose to relieve nasal obstruction of patient and findings consistent with nasal endoscopy. The anterior nasal packing routinely done following septoplasty is usually conventional and not evidence based. The purpose of nasal packing is to obtain haemostasis, enhance opposition of septal flaps, avoid septal haematoma formation, close the dead space, avoid synechiae formation, provide support to septal cartilage and prevent its displacement. OBJECTIVE This study intends to evaluate the effects of nasal packing on surgical success and related complications in septoplasty. MATERIALS AND METHODS The present clinical prospective and randomised study was carried out on patients attending Otorhinolaryngology Department of Santhiram Medical College & General Hospital between March 2012 and March 2015. Patients undergoing septoplasty were randomised either to receive anterior nasal packing or to not receive nasal packing postoperatively. RESULTS Levels of pain experienced by patients with nasal packing postoperatively during the initial 24 hours postoperatively and during the removal of the pack were significantly more. Post-operative headache, epiphora, swallowing discomfort and sleep disturbance were more in patients with nasal packing and statistically (p.05. Septal haematoma, adhesions and local infections in both groups were statistically insignificant (p>.05. CONCLUSION Septoplasty enhances the standard of living of patients with septal deviation and nasal obstruction. Our study results suggest that nasal packing after septoplasty is not obligatory. Nasal packing causes considerably more pain and complications, and it should be reserved only for those who have bleeding predisposition.

  7. Safe-haven CDS Premia

    DEFF Research Database (Denmark)

    Klingler, Sven; Lando, David

    We argue that Credit Default Swap (CDS) premia for safe-haven sovereigns, like Germany and the United States, are driven to a large extent by regulatory requirements under which derivatives dealing banks have an incentive to buy CDS to hedge counterparty credit risk of their counterparties. We...... explain the mechanics of the regulatory requirements and develop a model in which derivatives dealers, who have a derivatives exposure with sovereigns, need CDS for capital relief. End users without exposure to the sovereigns sell the CDS and require a positive premium equivalent to the capital...

  8. Chilled packing systems for fruit flies (Diptera: Tephritidae) in the sterile insect technique

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, Emilio; Escobar, Arseny; Bravo, Bigail; Montoya, Pablo [Instituto Interamericano de Cooperacion para la Agricultura (IICA), Chiapas (Mexico); Secretaria de Agricultura, Ganaderia, Desarrollo Rural, Pesca y Alimentacion (SAGARPA), Mexico, D.F. (Mexico). Programa Moscafrut

    2010-07-15

    We evaluated three packing systems (PARC boxes, 'GT' screen towers and 'MX' screen towers) for the emergence and sexual maturation of sterile fruit flies, at three adult fl y densities (1, 1.2 and 1.3 fly/cm 2) and three food types. At the lowest density, results showed no significant differences in the longevity and flight ability of adult Anastrepha ludens (Loew) and Anastrepha obliqua Macquart among the three packing systems. Higher densities resulted in a decrease in these parameters. In the evaluation of the three food types, no significant differences were found either on longevity or flight ability of A. ludens. However, the greatest longevity for both sexes A. obliqua was obtained with commercial powdered Mb and the mix of sugar, protein and corn starch on paper (SPCP) food types. The highest value for flight ability in A. obliqua males was obtained with powdered Mb and SPCP food types, and for females with Mb powdered food. Our data indicated that GT and MX screen tower packing systems are an alternative to the PARC boxes, since they were suitable for adult fl y sexual maturation without any harm to their longevity or flight ability. The tested foods were equivalent in both fruit fl y species, with the exception of the agar type for A. obliqua, which yielded the lowest biological parameters evaluated. Our results contribute to the application of new methods for the packing and release of sterile flies in large-scale programs. (author)

  9. The cigarette pack as image: new evidence from tobacco industry documents.

    Science.gov (United States)

    Wakefield, M; Morley, C; Horan, J K; Cummings, K M

    2002-03-01

    To gain an understanding of the role of pack design in tobacco marketing. A search of tobacco company document sites using a list of specified search terms was undertaken during November 2000 to July 2001. Documents show that, especially in the context of tighter restrictions on conventional avenues for tobacco marketing, tobacco companies view cigarette packaging as an integral component of marketing strategy and a vehicle for (a) creating significant in-store presence at the point of purchase, and (b) communicating brand image. Market testing results indicate that such imagery is so strong as to influence smoker's taste ratings of the same cigarettes when packaged differently. Documents also reveal the careful balancing act that companies have employed in using pack design and colour to communicate the impression of lower tar or milder cigarettes, while preserving perceived taste and "satisfaction". Systematic and extensive research is carried out by tobacco companies to ensure that cigarette packaging appeals to selected target groups, including young adults and women. Cigarette pack design is an important communication device for cigarette brands and acts as an advertising medium. Many smokers are misled by pack design into thinking that cigarettes may be "safer". There is a need to consider regulation of cigarette packaging.

  10. Packing schemes of cavities in selected clathrasils and zeolites and the analogous packings of atoms in crystal structures

    DEFF Research Database (Denmark)

    Hem, Caroline Piper; Makovicky, Emil; Balic Zunic, Tonci

    2010-01-01

    Sizes of cavities and their packing schemes in selected zeolites and clathrasils were studied by means of least squares fitting of circumscribed spheres to them. Resulting packing of spheres of different diameters was analyzed by the coordinates of their centers, their volumes and sphericity......, and interpreted by comparison with analogous packings of atoms in inorganic compounds and alloys. The topology is described qualitatively as “negative” structures formed by the cavities. Melanophlogite and dodecasils 3C and 1H are all clathrasils with isolated cavities. They all have pentagonal dodecahedral [512......] cages, associated with other cavity types. The packing of cavities in melanophlogite is analogous to the packing of atoms in the structure of Cr3Si, where the Cr atoms form icosahedra around the Si sites. Dodecasil 3C has a cubic arrangement of [512] cavities, which is described as ABC stacking...

  11. Keeping you safe by making machine tools safe

    CERN Document Server

    2012-01-01

    CERN’s third safety objective for 2012 concerns the safety of equipment - and machine tools in particular.   There are three prerequisites for ensuring that a machine tool can be used safely: ·      the machine tool must comply with Directive 2009/104/EC, ·      the layout of the workshop must be compliant, and ·      everyone who uses the machine tool must be trained. Provided these conditions are met, the workshop head can grant authorisation to use the machine tool. To fulfil this objective, an inventory of the machine tools must be drawn up and the people responsible for them identified. The HSE Unit's Safety Inspection Service produces compliance reports for the machine tools. In order to meet the third objective set by the Director-General, the section has doubled its capacity to carry out inspections: ...

  12. Fast charge implications: Pack and cell analysis and comparison

    Science.gov (United States)

    Tanim, Tanvir R.; Shirk, Matthew G.; Bewley, Randy L.; Dufek, Eric J.; Liaw, Bor Yann

    2018-03-01

    This study investigates the effect of 50-kW (about 2C) direct current fast charging on a full-size battery electric vehicle's battery pack in comparison to a pack exclusively charged at 3.3 kW, which is the common alternating current Level 2 charging power level. Comparable scaled charging protocols are also independently applied to individual cells at three different temperatures, 20 °C, 30 °C, and 40 °C, to perform a comparative analysis with the packs. Dominant cell-level aging modes were identified through incremental capacity analysis and compared with full packs to gain a clear understanding of additional key factors that affect pack aging. While the cell-level study showed a minor impact on performance due to direct current fast charging, the packs showed a significantly higher rate of capacity fade under similar charging protocols. This indicates that pack-level aging cannot be directly extrapolated from cell evaluation. Delayed fast charging, completing shortly before discharge, was found to have less of an impact on battery degradation than conventional alternating current Level 2 charging.

  13. Do gray wolves (Canis lupus) support pack mates during aggressive inter-pack interactions?

    Science.gov (United States)

    Cassidy, Kira A; McIntyre, Richard T

    2016-09-01

    For group-living mammals, social coordination increases success in everything from hunting and foraging (Crofoot and Wrangham in Mind the Gap, Springer, Berlin, 2010; Bailey et al. in Behav Ecol Sociobiol 67:1-17, 2013) to agonism (Mosser and Packer in Anim Behav 78:359-370, 2009; Wilson et al. in Anim Behav 83:277-291, 2012; Cassidy et al. in Behav Ecol 26:1352-1360, 2015). Cooperation is found in many species and, due to its low costs, likely is a determining factor in the evolution of living in social groups (Smith in Anim Behav 92:291-304, 2014). Beyond cooperation, many mammals perform costly behaviors for the benefit of group mates (e.g., parental care, food sharing, grooming). Altruism is considered the most extreme case of cooperation where the altruist increases the fitness of the recipient while decreasing its own fitness (Bell in Selection: the mechanism of evolution. Oxford University Press, Oxford 2008). Gray wolf life history requires intra-pack familiarity, communication, and cooperation in order to succeed in hunting (MacNulty et al. in Behav Ecol doi: 10.1093/beheco/arr159 2011) and protecting group resources (Stahler et al. in J Anim Ecol 82: 222-234, 2013; Cassidy et al. in Behav Ecol 26:1352-1360, 2015). Here, we report 121 territorial aggressive inter-pack interactions in Yellowstone National Park between 1 April 1995 and 1 April 2011 (>5300 days of observation) and examine each interaction where one wolf interferes when its pack mate is being attacked by a rival group. This behavior was recorded six times (17.6 % of interactions involving an attack) and often occurred between dyads of closely related individuals. We discuss this behavior as it relates to the evolution of cooperation, sociality, and altruism.

  14. Performance characteristics of an electric-vehicle lead-acid battery pack at elevated temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, P.

    1982-04-01

    Data are presented for discharge testing of an 18-Exide IV electric car battery pack over initial electrolyte temperature variations between 27 and 55/sup 0/C. The tests were conducted under laboratory conditions and then compared to detailed electric vehicle simulation models. Results showed that battery discharge capacity increased with temperature for constant current discharges, and that battery energy capacity increased with temperature for constant power discharges. Dynamometer test of the GE Electric Test Vehicle showed an increase in range of 25% for the highest electrolyte temperature.

  15. Avoidance of cigarette pack health warnings among regular cigarette smokers.

    Science.gov (United States)

    Maynard, Olivia M; Attwood, Angela; O'Brien, Laura; Brooks, Sabrina; Hedge, Craig; Leonards, Ute; Munafò, Marcus R

    2014-03-01

    Previous research with adults and adolescents indicates that plain cigarette packs increase visual attention to health warnings among non-smokers and non-regular smokers, but not among regular smokers. This may be because regular smokers: (1) are familiar with the health warnings, (2) preferentially attend to branding, or (3) actively avoid health warnings. We sought to distinguish between these explanations using eye-tracking technology. A convenience sample of 30 adult dependent smokers participated in an eye-tracking study. Participants viewed branded, plain and blank packs of cigarettes with familiar and unfamiliar health warnings. The number of fixations to health warnings and branding on the different pack types were recorded. Analysis of variance indicated that regular smokers were biased towards fixating the branding rather than the health warning on all three pack types. This bias was smaller, but still evident, for blank packs, where smokers preferentially attended the blank region over the health warnings. Time-course analysis showed that for branded and plain packs, attention was preferentially directed to the branding location for the entire 10s of the stimulus presentation, while for blank packs this occurred for the last 8s of the stimulus presentation. Familiarity with health warnings had no effect on eye gaze location. Smokers actively avoid cigarette pack health warnings, and this remains the case even in the absence of salient branding information. Smokers may have learned to divert their attention away from cigarette pack health warnings. These findings have implications for cigarette packaging and health warning policy. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  16. Enabling Microliquid Chromatography by Microbead Packing of Microchannels

    Science.gov (United States)

    Balvin, Manuel; Zheng, Yun

    2014-01-01

    The microbead packing is the critical element required in the success of on-chip microfabrication of critical microfluidic components for in-situ analysis and detection of chiral amino acids. In order for microliquid chromatography to occur, there must be a stationary phase medium within the microchannel that interacts with the analytes present within flowing fluid. The stationary phase media are the microbeads packed by the process discussed in this work. The purpose of the microliquid chromatography is to provide a lightweight, low-volume, and low-power element to separate amino acids and their chiral partners efficiently to understand better the origin of life. In order to densely pack microbeads into the microchannels, a liquid slurry of microbeads was created. Microbeads were extracted from a commercially available high-performance liquid chromatography column. The silica beads extracted were 5 microns in diameter, and had surface coating of phenyl-hexyl. These microbeads were mixed with a 200- proof ethanol solution to create a microbead slurry with the right viscosity for packing. A microfilter is placed at the outlet via of the microchannel and the slurry is injected, then withdrawn across a filter using modified syringes. After each injection, the channel is flushed with ethanol to enhance packing. This cycle is repeated numerous times to allow for a tightly packed channel of microbeads. Typical microbead packing occurs in the macroscale into tubes or channels by using highly pressurized systems. Moreover, these channels are typically long and straight without any turns or curves. On the other hand, this method of microbead packing is completed within a microchannel 75 micrometers in diameter. Moreover, the microbead packing is completed into a serpentine type microchannel, such that it maximizes microchannel length within a microchip. Doing so enhances the interactions of the analytes with the microbeads to separate efficiently amino acids and amino acid

  17. Optimization of heterogeneous Bin packing using adaptive genetic algorithm

    Science.gov (United States)

    Sridhar, R.; Chandrasekaran, M.; Sriramya, C.; Page, Tom

    2017-03-01

    This research is concentrates on a very interesting work, the bin packing using hybrid genetic approach. The optimal and feasible packing of goods for transportation and distribution to various locations by satisfying the practical constraints are the key points in this project work. As the number of boxes for packing can not be predicted in advance and the boxes may not be of same category always. It also involves many practical constraints that are why the optimal packing makes much importance to the industries. This work presents a combinational of heuristic Genetic Algorithm (HGA) for solving Three Dimensional (3D) Single container arbitrary sized rectangular prismatic bin packing optimization problem by considering most of the practical constraints facing in logistic industries. This goal was achieved in this research by optimizing the empty volume inside the container using genetic approach. Feasible packing pattern was achieved by satisfying various practical constraints like box orientation, stack priority, container stability, weight constraint, overlapping constraint, shipment placement constraint. 3D bin packing problem consists of ‘n’ number of boxes being to be packed in to a container of standard dimension in such a way to maximize the volume utilization and in-turn profit. Furthermore, Boxes to be packed may be of arbitrary sizes. The user input data are the number of bins, its size, shape, weight, and constraints if any along with standard container dimension. This user input were stored in the database and encoded to string (chromosomes) format which were normally acceptable by GA. GA operators were allowed to act over these encoded strings for finding the best solution.

  18. Removal of H2S from Biogas by Iron (Fe3+ Doped MgO on Ceramic Honeycomb Catalyst using Double Packed Columns System

    Directory of Open Access Journals (Sweden)

    Juntima Chungsiriporn

    2010-03-01

    Full Text Available Hydrogen sulfide is a toxic and corrosive in nature, gas should be safely removed from the biogas streams before subjecting into the fuel cell. Fe3+ doped magnesium oxide was synthesized using sol-gel technique and dip coating process of Fe3+ doped MgO on foam ceramic honeycomb. XRD and SEM indicate that Fe3+ in Fe3+ doped MgO on foam ceramic honeycomb catalyst is finely dispersed in the MgO support. Performance of the synthesized Fe3+ doped magnesium oxide on the honeycomb catalyst was examined for hydrogen sulfide (H2S oxidation by double packed column scrubbers. The absorption column was used for H2S scrubbing from biogas by deionized water absorption and catalytic column was used as catalyst bed for degradation of absorbed H2S in scrubbing water. In the catalytic column, counter current flow of the scrubbing water and air through the catalyst pack was performed for H2S oxidation accompany with catalyst regeneration. System capacity for H2S removal from gas stream showed 98% constant along 3 hr testing time at room temperature.

  19. Experimental and numerical investigation of a packed-bed thermal energy storage device

    Science.gov (United States)

    Yang, Bei; Wang, Yan; Bai, Fengwu; Wang, Zhifeng

    2017-06-01

    This paper presents a pilot-scale setup built to study a packed bed thermal energy storage device based on ceramic balls randomly poured into a cylindrical tank while using air as heat transfer fluid. Temperature distribution of ceramic balls throughout the packed bed is investigated both experimentally and numerically. Method of characteristic is adopted to improve the numerical computing efficiency, and mesh independence is verified to guarantee the accuracy of numerical solutions and the economy of computing time cost at the same time. Temperature in tests is as high as over 600 °C, and modeling prediction shows good agreements with experimental results under various testing conditions when heat loss is included and thermal properties of air are considered as temperature dependent.

  20. Ecology of southern ocean pack ice.

    Science.gov (United States)

    Brierley, Andrew S; Thomas, David N

    2002-01-01

    Around Antarctica the annual five-fold growth and decay of sea ice is the most prominent physical process and has a profound impact on marine life there. In winter the pack ice canopy extends to cover almost 20 million square kilometres--some 8% of the southern hemisphere and an area larger than the Antarctic continent itself (13.2 million square kilometres)--and is one of the largest, most dynamic ecosystems on earth. Biological activity is associated with all physical components of the sea-ice system: the sea-ice surface; the internal sea-ice matrix and brine channel system; the underside of sea ice and the waters in the vicinity of sea ice that are modified by the presence of sea ice. Microbial and microalgal communities proliferate on and within sea ice and are grazed by a wide range of proto- and macrozooplankton that inhabit the sea ice in large concentrations. Grazing organisms also exploit biogenic material released from the sea ice at ice break-up or melt. Although rates of primary production in the underlying water column are often low because of shading by sea-ice cover, sea ice itself forms a substratum that provides standing stocks of bacteria, algae and grazers significantly higher than those in ice-free areas. Decay of sea ice in summer releases particulate and dissolved organic matter to the water column, playing a major role in biogeochemical cycling as well as seeding water column phytoplankton blooms. Numerous zooplankton species graze sea-ice algae, benefiting additionally because the overlying sea-ice ceiling provides a refuge from surface predators. Sea ice is an important nursery habitat for Antarctic krill, the pivotal species in the Southern Ocean marine ecosystem. Some deep-water fish migrate to shallow depths beneath sea ice to exploit the elevated concentrations of some zooplankton there. The increased secondary production associated with pack ice and the sea-ice edge is exploited by many higher predators, with seals, seabirds and whales

  1. Packing parameters effect on injection molding of polypropylene nanostructured surfaces

    DEFF Research Database (Denmark)

    Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard

    2012-01-01

    In today´s industry, applications involving surface patterning of sub-μm to nanometer scale structures have shown a high growth potential. To investigate the injection molding capability of replicating sub-μm surface texture on a large scale area, a 30x80 mm2 tool insert with surface structures...... having a diameter of 500 nm was employed. The tool insert surface was produced using chemical-based-batch techniques such aluminum anodization and nickel electroplating. During the injection molding process, polypropylene (PP) was employed as material and packing phase parameters (packing time, packing...

  2. Multilayer DNA Origami Packed on Hexagonal and Hybrid Lattices

    DEFF Research Database (Denmark)

    Ke, Yonggang; Voigt, Niels Vinther; Shih, William M.

    2012-01-01

    “Scaffolded DNA origami” has been proven to be a powerful and efficient approach to construct two-dimensional or three-dimensional objects with great complexity. Multilayer DNA origami has been demonstrated with helices packing along either honeycomb-lattice geometry or square-lattice geometry. H...... DNA origami with honeycomb-lattice, square-lattice, and hexagonal-lattice packing of helices all in one design. The availability of hexagonal close-packing of helices extends our ability to build complex structures using DNA nanotechnology....

  3. Multi-dimensional Bin Packing Problems with Guillotine Constraints

    DEFF Research Database (Denmark)

    Amossen, Rasmus Resen; Pisinger, David

    2010-01-01

    The problem addressed in this paper is the decision problem of determining if a set of multi-dimensional rectangular boxes can be orthogonally packed into a rectangular bin while satisfying the requirement that the packing should be guillotine cuttable. That is, there should exist a series of face...... parallel straight cuts that can recursively cut the bin into pieces so that each piece contains a box and no box has been intersected by a cut. The unrestricted problem is known to be NP-hard. In this paper we present a generalization of a constructive algorithm for the multi-dimensional bin packing...

  4. Wolves adapt territory size, not pack size to local habitat quality.

    Science.gov (United States)

    Kittle, Andrew M; Anderson, Morgan; Avgar, Tal; Baker, James A; Brown, Glen S; Hagens, Jevon; Iwachewski, Ed; Moffatt, Scott; Mosser, Anna; Patterson, Brent R; Reid, Douglas E B; Rodgers, Arthur R; Shuter, Jen; Street, Garrett M; Thompson, Ian D; Vander Vennen, Lucas M; Fryxell, John M

    2015-09-01

    1. Although local variation in territorial predator density is often correlated with habitat quality, the causal mechanism underlying this frequently observed association is poorly understood and could stem from facultative adjustment in either group size or territory size. 2. To test between these alternative hypotheses, we used a novel statistical framework to construct a winter population-level utilization distribution for wolves (Canis lupus) in northern Ontario, which we then linked to a suite of environmental variables to determine factors influencing wolf space use. Next, we compared habitat quality metrics emerging from this analysis as well as an independent measure of prey abundance, with pack size and territory size to investigate which hypothesis was most supported by the data. 3. We show that wolf space use patterns were concentrated near deciduous, mixed deciduous/coniferous and disturbed forest stands favoured by moose (Alces alces), the predominant prey species in the diet of wolves in northern Ontario, and in proximity to linear corridors, including shorelines and road networks remaining from commercial forestry activities. 4. We then demonstrate that landscape metrics of wolf habitat quality - projected wolf use, probability of moose occupancy and proportion of preferred land cover classes - were inversely related to territory size but unrelated to pack size. 5. These results suggest that wolves in boreal ecosystems alter territory size, but not pack size, in response to local variation in habitat quality. This could be an adaptive strategy to balance trade-offs between territorial defence costs and energetic gains due to resource acquisition. That pack size was not responsive to habitat quality suggests that variation in group size is influenced by other factors such as intraspecific competition between wolf packs. © 2015 The Authors. Journal of Animal Ecology © 2015 British Ecological Society.

  5. Polymer-coated fibrous materials as the stationary phase in packed capillary gas chromatography.

    Science.gov (United States)

    Saito, Yoshihiro; Tahara, Ai; Imaizumi, Motohiro; Takeichi, Tsutomu; Wada, Hiroo; Jinno, Kiyokatsu

    2003-10-15

    Synthetic polymer filaments have been introduced as the support material in packed capillary gas chromatography (GC). The filaments of the heat-resistant polymers, Zylon, Kevlar, Nomex, and Technora, were longitudinally packed into a short fused-silica capillary, followed by the conventional coating process for open-tubular GC columns. The separation of several test mixtures such as n-alkylbenzenes and n-alkanes was carried out with these polymer-coated fiber-packed capillary columns. With the coating by various polymeric materials on the surface of these filaments, the retentivity was significantly improved over the parent fiber-packed column (without polymer coating) as well as a conventional open-tubular capillary of the same length. The results demonstrated a good combination of Zylon as the support and poly(dimethylsiloxane)-based materials as the coating liquid-phase for the successful GC separation of n-alkanes and polycyclic aromatic hydrocarbons (PAHs), while successful applications for other separations such as poly(ethylene glycol) coating for the separation of alcohols were also obtained. From the results it has been suggested that the selectivity of the fiber-packed column could be tuned by selecting different coating materials, indicating the promising possibility for a novel usage of fine fibrous polymers as the support material that can be combined with newly synthesized coating materials specially designed for particular separations. Taking advantage of good thermal stability of the fibers, the column temperature could be elevated to higher than 350 degrees C with the combination of a short metallic capillary.

  6. Multidisciplinary intervention decreases the use of opioid medication discharge packs from 2 urban EDs.

    Science.gov (United States)

    Gugelmann, Hallam; Shofer, Frances S; Meisel, Zachary F; Perrone, Jeanmarie

    2013-09-01

    Prescription opioid overdoses and deaths constitute a public health epidemic, and recent studies show that emergency department (ED) prescribers may contribute to this crisis. We hypothesized that a multidisciplinary educational intervention would decrease ED opioid packs dispensed at discharge. This prospective study implemented a "bundle" of interdisciplinary educational modalities: lectures, journal clubs, case discussions, and an electronic medical record decision support tool. Implementation occurred in 2 urban EDs in the same health system at different times ("affiliate," September 2011; "primary," January 2012) to better distinguish its effects. The primary outcome was preintervention/postintervention change in opioid discharge packs dispensed to all patients treated and discharged through August 2012 and was assessed by 2-way analysis of variance. The secondary outcome was bivariate analysis (using Fisher exact test) of change in opioid dispensing among patients with known risk factors for prescription opioid dependence: age less than 65 years, history of substance abuse, chronic pain, or psychiatric disorders. A total of 71,512 and 45,746 patients were evaluated and discharged from primary and affiliate EDs, respectively. Orders for opioid discharge packs decreased from 13.9% to 8.4% and 4.7% to 1.9% at the primary and affiliate hospitals (P opioid dependence at the primary ED decreased from 21.8% to 13.9%. A staged, multidisciplinary intervention targeting nurses, residents, nurse practitioners, and attending physicians was associated with decreased orders for opioid discharge packs in 2 urban EDs. Opioid discharge pack orders decreased slightly more among patients with risk factors for prescription opioid dependence. © 2013.

  7. The Difference Safe Spaces Make

    Directory of Open Access Journals (Sweden)

    Kendric Coleman

    2016-05-01

    Full Text Available In the last decade, lesbian, gay, bisexual, and transgender (LGBT students have become very visible at Historically Black Colleges and Universities (HBCUs, but this visibility is not reflected in some colleges’ student programs and activities. Only a few notable HBCUs, such as Howard University and Spelman College, have made a concerted effort. Acknowledging that the LGBT community is significant and exists, and fostering such support, comes up against a steep wall of religious tradition and doctrines, and conservative administrations. It is imperative that HBCUs address LGBT issues and create and support a safe space for students to articulate their identity. Meanwhile, many LGBT students on these campuses find voice and understanding in Black scholars and writers such as Audre Lorde’s Zami: A New Spelling of My Name and Charles Michael Smith’s Fighting Words: Personal Essays by Black Gay Men.

  8. Is herniography useful and safe?

    Energy Technology Data Exchange (ETDEWEB)

    Hureibi, K.A., E-mail: alhureibi@gmail.com [Musgrove Park Hospital, Taunton TA1 5DA (United Kingdom); McLatchie, Gregor R., E-mail: Gregor.McLatchie@nth.nhs.uk [University Hospital of Hartlepool, Holdforth Road, Hartlepool TS24 9AH (United Kingdom); Kidambi, Ananta V., E-mail: Ananta.Kidambi@nth.nhs.uk [University Hospital of Hartlepool, Holdforth Road, Hartlepool TS24 9AH (United Kingdom)

    2011-11-15

    117 consecutive herniograms were reviewed for patients who had symptoms suggestive of hernia but with no evidence or inconclusive findings on physical examination. The traditional approach has been to explore patients with suspected occult hernias. The aim of this study was to assess the impact of herniography in minimizing needless groin exploration and to evaluate its safety. Thirty-three herniograms were positive and showed unilateral and bilateral inguinal hernias. There were no false positive examinations and two false negative examinations. No complications were present. Patients with positive herniograms were explored, and operative findings correlated well with herniographic findings. Twenty-four patients were referred to other specialities. Follow-up in clinic and telephone interviews showed symptomatic improvement in the majority of patients. Herniography is useful in evaluating obscure groin pain and occult hernias. It is a safe procedure and more cost effective than a negative exploration or diagnostic laparoscopy.

  9. Compositions based on mineral binders for protective isolation packs in mines

    Energy Technology Data Exchange (ETDEWEB)

    Belyaeva, L.S.; Snisarenko, R.F.; Demenkova, K.M. (Nauchno-Issledovatel' skii Institut Gorno-Spasatel' nogo Dela, Donetsk (Ukraine))

    1992-11-01

    Reports on work conducted at the NIIGD institute on improved properties of gypsum based compositions used in air and fire isolating packs in coal mines. Compositions of gypsum, portland cement, fly ash, magnesite, bischofite and pulverized mine stone are discussed. Compression strength of cubical specimens made of compositions based on gypsum that contained 40% pulverized mine stone is shown in graphs along with stress-strain curves. All the compositions tested proved to be impermeable to air. 2 refs.

  10. Safe motherhood: the FIGO initiative.

    Science.gov (United States)

    Benagiano, G; Thomas, B

    2003-09-01

    Over the last twenty years the international community-realizing that the tragedy of women dying during pregnancy and in childbirth could no longer be tolerated-launched a series of initiatives aimed at making safe motherhood a cornerstone of health services in all countries. Making pregnancy and delivery safe events is particularly complex, as it involves infrastructural and logistic, as well as technical, issues. Women die because they have no access to skilled personnel during pregnancy and at the time of delivery and because--if an emergency situation arises--they cannot reach a facility where emergency obstetric services are available. FIGO, the International Federation of Obstetrics and Gynecology-as the only global organization representing the Obstetricians of the world-decided some time ago that it could not limit its activities to proposing technical guidelines and debating scientific issues. It had to move into the field and, through its affiliated societies, help change the ability of the multitude of women in the developing world to obtain skilled attendance at birth. In 1997, plans were made to launch activities in five areas where maternal mortality was particularly high: Central America (Guatemala, Honduras, Nicaragua and El Salvador), Ethiopia, Mozambique, Pakistan, and Uganda. Five member societies from the developed world (the American College of Obstetricians and Gynecologists, the Society of Obstetricians and Gynecologists of Canada, the Italian Society of Obstetrics and Gynecology, the Royal College of Obstetricians and Gynecologists of the United Kingdom; and the Swedish Society of Obstetrics and Gynecology) agreed to provide support to their counterparts in these five selected areas. The project is now in its final stage. Results are, by and large, positive, demonstrating that, by motivating health professionals in the field and for a relatively modest financial outlay, more efficient use of existing services could be made in a sustainable

  11. Increasing the shelf- life of papaya through vacuum packing

    National Research Council Canada - National Science Library

    Padmanaban, Geetha; Singaravelu, Kanchana; Annavi, Susheela Thirumaran

    2014-01-01

    .... Papaya fruits were pretreated with waxing, oil application, purafil packets, tissue paper wrapping given along with control and were packed in 150 gauge thickness polyethylene film bags under vacuum...

  12. Gibbon Packing, LLC - Clean Water Act Public Notice

    Science.gov (United States)

    The EPA is providing notice of a proposed Administrative Penalty Assessment against Gibbon Packing, LLC, for alleged violations at the facility located in 218 East Highway 30, P.O. Box 730, Gibbon, NE 68840 (“facility”).

  13. SWORDFISH STEAKS VACUUM-PACKED WITH ROSMARINUS OFFICINALIS

    National Research Council Canada - National Science Library

    A Anastasio; R Marrone; C Chirollo; G Smaldone; M Attouchi; P Adamo; S Sadok; T Pepe

    2014-01-01

      In order to investigate the shelf life of swordfish steaks vacuum-packed with Rosmarinus officinalis, microbiological, chemical and sensorial analyses were carried out after 1, 3, 6, 8, 12 and 16 days of storage...

  14. Packing 16, 17 of 18 circles in an equilateral triangle

    NARCIS (Netherlands)

    Melissen, J.B.M.; Schuur, Peter

    1995-01-01

    We present new, efficient packings for 16, 17 and 18 congruent circles in an equilateral triangle. The results have been found by the use of simulated annealing and a quasi-Newton optimization technique, supplemented with some human intelligence.

  15. Physical and structural characteristics of Weddell Sea pack ice

    National Research Council Canada - National Science Library

    Gow, A.J; Ackley, S.F; Buck, K.R; Golden, K.M

    1987-01-01

    Recent studies by CRREL researchers of the dynamics and thermodynamics of sea ice in the Antarctic have included investigations of the physical and structural properties of pack ice in the Weddell Sea...

  16. Excise Tax Rates On Packs Of Cigarettes PDF Slides

    Data.gov (United States)

    U.S. Department of Health & Human Services — Download the current excise tax rates on packs of cigarettes slides. These slides are available in PDF and PowerPoint formats. The PowerPoint version can be found...

  17. LACK OF AWARENESS ABOUT SAFE BLOOD IN PAKISTANI POPULATION

    Directory of Open Access Journals (Sweden)

    Muhammad Usman

    2014-12-01

    Full Text Available Blood transfusion is a life saving procedure in various transfusion-dependent life threatening conditions and donation of safe blood is a prerequisite for achieving this goal. This study was designed to evaluate the awareness regarding “safe blood” in Pakistani population. This study was conducted at a large scale through a population survey. The test population was divided into two groups i.e. general population and students. The Performa was designed for a general and student population and included 20 questions related to awareness of safe blood. A total of 4900 individuals belonging to different ethnic groups were included in this population survey. Results of social survey were analyzed by using Usman and Moin awareness chart. Results of this study revealed profound unawareness about safe blood in Pakistani population. This study found lack of awareness about safe blood as a major factor that is playing a vital role in the propagation of blood borne diseases in Pakistan. To secure the recipients from blood borne complications through blood donation, it is necessary to create effective awareness about safe blood in Pakistani population.

  18. Models for Metal Hydride Particle Shape, Packing, and Heat Transfer

    OpenAIRE

    Smith, Kyle C.; Fisher, Timothy S.

    2012-01-01

    A multiphysics modeling approach for heat conduction in metal hydride powders is presented, including particle shape distribution, size distribution, granular packing structure, and effective thermal conductivity. A statistical geometric model is presented that replicates features of particle size and shape distributions observed experimentally that result from cyclic hydride decrepitation. The quasi-static dense packing of a sample set of these particles is simulated via energy-based structu...

  19. Development of Dynamic Models for a Reactive Packed Distillation Column

    OpenAIRE

    Abdulwahab GIWA; Süleyman KARACAN

    2012-01-01

    This work has been carried out to develop dynamic models for a reactive packed distillation column using the production of ethyl acetate as the case study. The experimental setup for the production of ethyl acetate was a pilot scale packed column divided into condenser, rectification, acetic acid feed, reaction, ethanol feed, stripping and reboiler sections. The reaction section was filled with Amberlyst 15 catalyst while the rectification and the stripping sections were both filled raschig r...

  20. Packing Infinite Number of Cubes in a Finite Volume Box

    Science.gov (United States)

    Yao, Haishen; Wajngurt, Clara

    2006-01-01

    Packing an infinite number of cubes into a box of finite volume is the focus of this article. The results and diagrams suggest two ways of packing these cubes. Specifically suppose an infinite number of cubes; the side length of the first one is 1; the side length of the second one is 1/2 , and the side length of the nth one is 1/n. Let n approach…

  1. Porosity and packing of Holocene river, dune, and beach sands

    Energy Technology Data Exchange (ETDEWEB)

    Atkins, J.E. (Conoco, Inc., Oklahoma City, OK (United States)); McBride, E.F. (Univ. of Texas, Austin (United States))

    1991-03-01

    The porosity and packing of 174 samples of well-sorted surficial and shallowly buried (to 17 m), unconsolidated Holocene sands were determined by point counting the upper surface of thin sections of epoxy-impregnated samples in reflected light. Average depositional porosity for 124 surficial beach sands, river point-bar and braid-bar sands, and eolian dune sands is between 40% and 58%. Beach sands exhibit an average packing value (contact index = CI) of 0.79, river sands an average IC of 0.91, and eolian dune sands an average CI of 1.02. Packing gets tighter with depth, but the authors found no decrease in porosity with depth for river and beach sands buried to 17 m. Thus, packing is more sensitive to small changes in fabric than is porosity. Beach sands typically contain 5.5% oversized pores (OSP), river sands 3.8% OSP, and eolian dune sands 4.0% OSP. Most OSP are packing defects rather than dissolution pores, although trapped air bubbles are common in some beach sands. OSP decrease linearly with depth to 17 m, our deepest sample. Extrapolation of our data indicates that they will be destroyed at a depth less than 100 m. Significant differences in porosity, oversized-pore, and packing values exist between most point-bar and braid-bar deposits and between two heavily sampled point bars, but no significant differences in these values exist when braid-bar sands are compared to other braid-bar sands. Sands form different beaches have significant differences in porosity, oversized pores, and packing. The average porosity is 46% for eolian ripple strata, 50% for grain-fall strata, and 51% for grain-flow strata. Ripple strata are tighter packed than grain-fall and grain-flow strata.

  2. Spectral action models of gravity on packed swiss cheese cosmology

    Science.gov (United States)

    Ball, Adam; Marcolli, Matilde

    2016-06-01

    We present a model of (modified) gravity on spacetimes with fractal structure based on packing of spheres, which are (Euclidean) variants of the packed swiss cheese cosmology models. As the action functional for gravity we consider the spectral action of noncommutative geometry, and we compute its expansion on a space obtained as an Apollonian packing of three-dimensional spheres inside a four-dimensional ball. Using information from the zeta function of the Dirac operator of the spectral triple, we compute the leading terms in the asymptotic expansion of the spectral action. They consist of a zeta regularization of the divergent sum of the leading terms of the spectral actions of the individual spheres in the packing. This accounts for the contribution of points 1 and 3 in the dimension spectrum (as in the case of a 3-sphere). There is an additional term coming from the residue at the additional point in the real dimension spectrum that corresponds to the packing constant, as well as a series of fluctuations coming from log-periodic oscillations, created by the points of the dimension spectrum that are off the real line. These terms detect the fractality of the residue set of the sphere packing. We show that the presence of fractality influences the shape of the slow-roll potential for inflation, obtained from the spectral action. We also discuss the effect of truncating the fractal structure at a certain scale related to the energy scale in the spectral action.

  3. Heated Debates: Hot-Water Immersion or Ice Packs as First Aid for Cnidarian Envenomations?

    Directory of Open Access Journals (Sweden)

    Christie L. Wilcox

    2016-04-01

    Full Text Available Cnidarian envenomations are an important public health problem, responsible for more deaths than shark attacks annually. For this reason, optimization of first-aid care is essential. According to the published literature, cnidarian venoms and toxins are heat labile at temperatures safe for human application, which supports the use of hot-water immersion of the sting area(s. However, ice packs are often recommended and used by emergency personnel. After conducting a systematic review of the evidence for the use of heat or ice in the treatment of cnidarian envenomations, we conclude that the majority of studies to date support the use of hot-water immersion for pain relief and improved health outcomes.

  4. High throughput photo-oxidations in a packed bed reactor system.

    Science.gov (United States)

    Kong, Caleb J; Fisher, Daniel; Desai, Bimbisar K; Yang, Yuan; Ahmad, Saeed; Belecki, Katherine; Gupton, B Frank

    2017-12-01

    The efficiency gains produced by continuous-flow systems in conducting photochemical transformations have been extensively demonstrated. Recently, these systems have been used in developing safe and efficient methods for photo-oxidations using singlet oxygen generated by photosensitizers. Much of the previous work has focused on the use of homogeneous photocatalysts. The development of a unique, packed-bed photoreactor system using immobilized rose bengal expands these capabilities as this robust photocatalyst allows access to and elaboration from these highly useful building blocks without the need for further purification. With this platform we were able to demonstrate a wide scope of singlet oxygen ene, [4+2] cycloadditions and heteroatom oxidations. Furthermore, we applied this method as a strategic element in the synthesis of the high-volume antimalarial artemisinin. Copyright © 2017. Published by Elsevier Ltd.

  5. Packing for damage control of nontraumatic intra-abdominal massive hemorrhages.

    Science.gov (United States)

    Filicori, Filippo; Di Saverio, Salomone; Casali, Marco; Biscardi, Andrea; Baldoni, Franco; Tugnoli, Gregorio

    2010-09-01

    The Damage Control Surgery (DCS) approach to massive intraperitoneal hemorrhage has been shown to significantly reduce the morbidity and mortality in severely injured trauma patients. We applied the same principles to patients who developed a massive hemorrhage and the "lethal triad" (acidosis, hypothermia, coagulopathy) during a surgical procedure in order to assess feasibility and efficacy of DCS on nontraumatic grounds. A retrospective analysis of eight consecutive cases was performed aimed at collecting information on laboratory parameters, fluids requirements, operative times, APACHE II score, damage control surgery procedure, angioembolization, morbidity, mortality, and need for repacking. Average APACHE II score was 25.5 (predicted mortality rate = 54%); overall and early mortality in the nontraumatic group was nil, while the intra-abdominal septic (packing-related) complication rate was 12.5%. Intra-abdominal packing was shown to be feasible, safe, and effective for patients with intra-abdominal nontraumatic massive hemorrhage, and the application of the principles of DCS may improve survival in cases of surgical hemorrhage with development of the lethal triad.

  6. Novel Battery Management System with Distributed Wireless and Fiber Optic Sensors for Early Detection and Suppression of Thermal Runaway in Large Battery Packs, FY13 Q4 Report, ARPA-E Program: Advanced Management Protection of Energy Storage Devices (AMPE

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chang, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zumstein, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kovotsky, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Puglia, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dobley, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Moore, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Osswald, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wolf, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kaschmitter, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Eaves, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-10-08

    Technology has been developed that enables monitoring of individual cells in highcapacity lithium-ion battery packs, with a distributed array of wireless Bluetooth 4.0 tags and sensors, and without proliferation of extensive wiring harnesses. Given the safety challenges facing lithium-ion batteries in electric vehicle, civilian aviation and defense applications, these wireless sensors may be particularly important to these emerging markets. These wireless sensors will enhance the performance, reliability and safety of such energy storage systems. Specific accomplishments to date include, but are not limited to: (1) the development of wireless tags using Bluetooth 4.0 standard to monitor a large array of sensors in battery pack; (2) sensor suites enabling the simultaneous monitoring of cell voltage, cell current, cell temperature, and package strain, indicative of swelling and increased internal pressure, (3) small receivers compatible with USB ports on portable computers; (4) software drivers and logging software; (5) a 7S2P battery simulator, enabling the safe development of wireless BMS hardware in the laboratory; (6) demonstrated data transmission out of metal enclosures, including battery box, with small variable aperture opening; (7) test data demonstrating the accurate and reliable operation of sensors, with transmission of terminal voltage, cell temperature and package strain at distances up to 110 feet; (8) quantification of the data transmission error as a function of distance, in both indoor and outdoor operation; (9) electromagnetic interference testing during operation with live, high-capacity battery management system at Yardney Technical Products; (10) demonstrated operation with live high-capacity lithium-ion battery pack during charge-discharge cycling; (11) development of special polymer-gel lithium-ion batteries with embedded temperature sensors, capable of measuring the core temperature of individual of the cells during charge-discharge cycling

  7. What is a safe lift?

    Science.gov (United States)

    Espinoza, Kathy

    2013-09-01

    In a perfect world, a "safe" lift would be 51 pounds if the object is within 7 inches from the front of the body, if it is at waist height, if it is directly in front of the person, if there is a handle on the object, and if the load inside the box/bucket doesn't shift once lifted. If the load to be lifted does not meet all of these criteria, then it is an unsafe lift, and modifications must be made. Modifications would include lightening the load, getting help, or using a mechanical lifting device. There is always a way to turn an unsafe lift into a safer lift. An excellent resource for anyone interested in eliminating some of the hazards associated with lifting is the "Easy Ergonomics" publication from Cal/OSHA. This booklet offers practical advice on how to improve the workplace using engineering and administrative controls, problem-solving strategies and solutions, and a vast amount of ergonomics information and resources. "Easy Ergonomics" can be obtained by calling Cal/OSHA's education and training unit in Sacramento at 800-963-9424. A free copy can be obtained via www.dir.ca.gov/dosh/puborder.asp.

  8. Safe disposal of prescribed medicines.

    Science.gov (United States)

    Bergen, Phillip J; Hussainy, Safeera Y; George, Johnson; Kong, David Cm; Kirkpatrick, Carl Mj

    2015-06-01

    The National Return and Disposal of Unwanted Medicines Program provides a free and safe method for the disposal of unwanted and expired medicines. This stops drugs being dumped in landfill and waterways. An audit showed that over 600 tonnes of medicines are returned through the program. A substantial proportion of these medicines were still within their expiry dates. Salbutamol, insulin and frusemide are the most commonly discarded medicines. More than $2 million of public money is wasted each year. Hoarding and non-adherence to treatment contribute to waste. Health professionals may be able to help minimise waste by informing patients about the importance of completing prescribed courses of treatment, and discouraging them from hoarding medicines after reaching the safety net threshold on the Pharmaceutical Benefits Scheme. Prescribe no more than the required quantity of medicines. When starting a new therapy, prescribe a minimal quantity in case the drug is unsuitable for the patient. Advise patients to return all unwanted medicines to a pharmacy for disposal.

  9. Test

    DEFF Research Database (Denmark)

    Bendixen, Carsten

    2014-01-01

    Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers.......Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers....

  10. Are Front of Pack Claims Indicators of Nutrition Quality? Evidence from 2 Product Categories.

    Science.gov (United States)

    Schaefer, Debra; Hooker, Neal H; Stanton, John L

    2016-01-01

    American grocery shoppers face an array of front of pack (FOP) nutrition and health claims when making food selections. Such systems have been categorized as summary or nutrient specific. Either type should help consumers make judgments about the nutrition quality of a product. This research tests if the type or quantity of FOP claims are indeed good indicators of objective nutrition quality. Claim and nutrition information from more than 2200 breakfast cereals and prepared meals launched between 2006 and 2010 were analyzed using binary and multinomial logistic regression models. Results suggest that no type or number of front of pack claims could distinguish "healthy" foods. However, some types and frequencies of FOP claims were significant predictors of higher or lower levels of certain key nutrients. Given the complex and crowded label environment in which these FOP claims reside, one may be concerned that such cues are not closely related to objective measures of nutrition quality. © 2015 Institute of Food Technologists®

  11. Experimental characterization of the rectification process in ammonia-water absorption systems with a large-specific-area corrugated sheet structured packing

    Energy Technology Data Exchange (ETDEWEB)

    Sieres, Jaime; Fernandez-Seara, Jose; Uhia, Francisco J. [Area de Maquinas y Motores Termicos, E.T.S. de Ingenieros Industriales, Campus Lagoas-Marcosende No 9, 36310 Vigo, Pontevedra (Spain)

    2009-09-15

    In this paper, the mass transfer performance of a large-specific-area corrugated sheet structured packing for ammonia-water absorption refrigeration systems (AARS) is reported. An experimental facility was used to test the performance of the packing. Experimental results of the temperature, ammonia concentration and mass flow rate of the rectified vapour are presented and discussed for different operating conditions including reflux ratio values from 0.2 to 1. The volumetric vapour phase mass transfer coefficient is calculated from the measured data and compared with different correlations found in the literature. A new correlation is proposed which was fitted from the experimental data. Finally, a comparison is made between the actual packing height used in the experimental setup and the height required to obtain the same ammonia rectification in AARS with different packings previously tested by the authors. (author)

  12. A randomised controlled trial comparing Rapid Rhino Mannheim and Netcell series 5000 packs following routine nasal surgery.

    Science.gov (United States)

    McDonald, S E; Slater, J; Powell, R; Khalil, H S; Garth, R J N

    2009-03-01

    To determine whether there is a difference in discomfort between Netcell Series 5000 and Rapid Rhino Mannheim 8.0 cm (Cat. No. 800) packs used after routine nasal surgery, whilst in situ and during removal. This was tested in a single blind, randomised controlled trial at the ENT Department, Royal Devon & Exeter Hospital. Adults aged 16-65 undergoing nasal septal surgery and trimming of inferior turbinates. Patients were excluded if they were undergoing revision surgery, taking anticoagulants, or had a history of sino-nasal disease or trauma. Thirty nine entered and 32 completed the study. The intervention was a different nasal pack in each side of the nose, removed the morning after surgery. Pain experienced by patients while packs are in situ and on removal as recorded on a standard unmarked 100 mm visual analogue scale. There was no difference in the pain scores whilst in situ. Rapid Rhino Mannheim was more painful on removal (difference = 10.6 mm, p Mannheim packs do not confer a benefit over Netcell Series 5000 packs after routine nasal surgery.

  13. Investigation of the effect of packing location on performance of closed wet cooling tower based on exergy analysis

    Science.gov (United States)

    Qasim, S. M.; Hayder, M. J.

    2016-08-01

    In this paper, the effect of packing location on thermal performance of Closed Wet Cooling Tower (CWCT) based on exergy analysis has been studied. The experimental study incorporates design, manufacture and testing of a modified counter flow forced draft CWCT prototype. The modification based on addition packing to the conventional CWCT. The variation of spray water temperature, air dry bulb temperature, air wet bulb temperature, enthalpy and relative humidity of air for different position along the tower are measured experimentally. Applying the exergy destruction method for the cooling tower; exergy destruction, exergy efficiency, exergy of water and air were calculated for two cases: CWCT with packing below the heat exchanger and CWCT with packing above the heat exchanger. It is highly important to analyze the exergy along the cooling tower height. Therefore, the exergy analysis of different elements along the height of the tower is carried out. Results show that the total exergy destruction of modified CWCT is higher when the heat exchanger is located above the packing at the highest point of the tower.

  14. A comunidade segura Safe community

    Directory of Open Access Journals (Sweden)

    Maria de Jesus C. S Harada

    2005-11-01

    Full Text Available OBJETIVO: Analisar a efetividade de programas de prevenção de injúrias intencionais e não intencionais, em crianças e adolescentes, embasados nos princípios da comunidade segura. FONTES DE DADOS: Pesquisa eletrônica nas bases de dados MEDLINE e LILACS, correspondendo ao período de 2000 a 2005. Para prevenção de injúrias não intencionais, usaram-se os descritores: injury and prevention and community or population and intervention; para prevenção de injúrias intencionais, violence and prevention and community or population and intervention; foi tomada como limite a faixa etária de 0 a 18 anos. Critérios de inclusão: artigos originais, que estudaram a efetividade de intervenções utilizando mais de uma estratégia e abrangendo toda uma comunidade ou grupo, abordando injúrias intencionais e não intencionais, publicados em português, inglês ou espanhol. SÍNTESE DOS DADOS: Foram obtidos 152 estudos como resultado. Considerando os critérios de inclusão, foram encontrados cinco artigos sobre prevenção de injúrias não intencionais, um sobre prevenção de injúrias intencionais e um artigo que aborda as duas questões. As pesquisas analisadas evidenciam benefícios para crianças e adolescentes, em diferentes proporções. CONCLUSÕES: Os programas que trabalham com o conceito de comunidade segura ainda são em número restrito. As investigações analisadas neste estudo apresentam resultados positivos. É preciso aumentar esforços para o desenvolvimento dessa base de evidência, respeitando as características locais, desenvolvendo indicadores de avaliação que permitam melhor comparação entre diferentes trabalhos.ABSTRACT OBJECTIVE:To analyze the effectiveness of prevention programs for intentional and unintentional injuries, based on safe community principles, in children and adolescents. SOURCES OF DATA: An electronic search was performed in the MEDLINE and LILACS database, corresponding to the period from 2000 to

  15. Midwifery education for safe motherhood.

    Science.gov (United States)

    O'Heir, J M

    1997-09-01

    To determine the useability (relevance, clarity and quality of content), applicability (ease of use) and accessibility (structure and form) of a series of new safe motherhood midwifery education modules. Questionnaire survey and focus group discussions, preceded by a two week clinical skills course and an eight day orientation to using the modules. Nursing and midwifery education institutions, regional training centres, acute-care hospital facilities and community settings in Ethiopia, Fiji, Lesotho, Mozambique and Nepal. Thirty-six teachers, 82 midwives, nurse-midwives and auxiliary nurse-midwives from practice settings, and 60 post basic midwifery students. Overall it was found that the introductory information and the technical content of the modules were easy to understand and use as were the instructions for both teachers and students. The presentation of the material was orderly and easy to follow; the language was comprehensible; and the illustrations were appropriate, clear and facilitated teaching. The teachers found that they were able to use most of the teaching/learning methods, teach most of the skills in the modules, and use the guidelines for assessing competence. The main difficulties encountered included adherence to the recommended time frame for some of the classroom sessions; the limited availability of clinical cases for teaching the specific skills in the modules and time limitations in the clinical area for practising the skills; and the provision of transport for community visits, data to complete community profiles, and time to complete other planned community activities. The students identified the need for a set of learning materials which they could take with them for future reference, and both teachers and students expressed concern about resources to support, and legislation to cover, the application of the skills taught/learned. The modules have the potential to strengthen and support the education of midwives in developing countries

  16. Safe prescribing: a titanic challenge.

    Science.gov (United States)

    Routledge, Philip A

    2012-10-01

    The challenge to achieve safe prescribing merits the adjective 'titanic'. The organisational and human errors leading to poor prescribing (e.g. underprescribing, overprescribing, misprescribing or medication errors) have parallels in the organisational and human errors that led to the loss of the Titanic 100 years ago this year. Prescribing can be adversely affected by communication failures, critical conditions, complacency, corner cutting, callowness and a lack of courage of conviction, all of which were also factors leading to the Titanic tragedy. These issues need to be addressed by a commitment to excellence, the final component of the 'Seven C's'. Optimal prescribing is dependent upon close communication and collaborative working between highly trained health professionals, whose role is to ensure maximum clinical effectiveness, whilst also protecting their patients from avoidable harm. Since humans are prone to error, and the environments in which they work are imperfect, it is not surprising that medication errors are common, occurring more often during the prescribing stage than during dispensing or administration. A commitment to excellence in prescribing includes a continued focus on lifelong learning (including interprofessional learning) in pharmacology and therapeutics. This should be accompanied by improvements in the clinical working environment of prescribers, and the encouragement of a strong safety culture (including reporting of adverse incidents as well as suspected adverse drug reactions whenever appropriate). Finally, members of the clinical team must be prepared to challenge each other, when necessary, to ensure that prescribing combines the highest likelihood of benefit with the lowest potential for harm. © 2012 The Author. British Journal of Clinical Pharmacology © 2012 The British Pharmacological Society.

  17. Comparison of an indirect tri-planar myofascial release (MFR) technique and a hot pack for increasing range of motion.

    Science.gov (United States)

    Kain, Jay; Martorello, Laura; Swanson, Edward; Sego, Sandra

    2011-01-01

    The purpose of the randomized clinical study was to scientifically assess which intervention increases passive range of motion most effectively: the indirect tri-planar myofascial release (MFR) technique or the application of hot packs for gleno-humeral joint flexion, extension, and abduction. A total of 31 participants from a sample of convenience were randomly assigned to examine whether or not MFR was as effective in increasing range of motion as hot packs. The sample consisted of students at American International College. Students were randomly assigned to two groups: hot pack application (N=13) or MFR technique (N=18). The independent variable was the intervention, either the tri-planar MFR technique or the hot pack application. Group one received the indirect tri-planar MFR technique once for 3min. Group two received one hot pack application for 20min. The dependent variables, passive gleno-humeral shoulder range of motion in shoulder flexion, shoulder extension, and shoulder abduction, were taken pre- and post-intervention for both groups. Data was analyzed through the use of a two-way factorial design with mixed-factors ANOVA. Prior to conducting the study, inter-rater reliability was established using three testers for goniometric measures. A 2 (type of intervention: hot packs or MFR) by 2 (pre-test or post-test) mixed-factors ANOVA was calculated. Significant increases in range of motion were found for flexion, extension and abduction when comparing pre-test scores to post-test scores. The results of the ANOVA showed that for passive range of motion no differences were found for flexion, extension and abduction between the effectiveness of hot packs and MFR. For each of the dependent variables measured, MFR was shown to be as effective as hot packs in increasing range of motion, supporting the hypothesis. Since there was no significant difference between the types of intervention, both the hot pack application and the MFR technique were found to be

  18. AxonPacking: An Open-Source Software to Simulate Arrangements of Axons in White Matter.

    Science.gov (United States)

    Mingasson, Tom; Duval, Tanguy; Stikov, Nikola; Cohen-Adad, Julien

    2017-01-01

    HIGHLIGHTS AxonPacking: Open-source software for simulating white matter microstructure.Validation on a theoretical disk packing problem.Reproducible and stable for various densities and diameter distributions.Can be used to study interplay between myelin/fiber density and restricted fraction. Quantitative Magnetic Resonance Imaging (MRI) can provide parameters that describe white matter microstructure, such as the fiber volume fraction (FVF), the myelin volume fraction (MVF) or the axon volume fraction (AVF) via the fraction of restricted water (fr). While already being used for clinical application, the complex interplay between these parameters requires thorough validation via simulations. These simulations required a realistic, controlled and adaptable model of the white matter axons with the surrounding myelin sheath. While there already exist useful algorithms to perform this task, none of them combine optimisation of axon packing, presence of myelin sheath and availability as free and open source software. Here, we introduce a novel disk packing algorithm that addresses these issues. The performance of the algorithm is tested in term of reproducibility over 50 runs, resulting density, and stability over iterations. This tool was then used to derive multiple values of FVF and to study the impact of this parameter on fr and MVF in light of the known microstructure based on histology sample. The standard deviation of the axon density over runs was lower than 10(-3) and the expected hexagonal packing for monodisperse disks was obtained with a density close to the optimal density (obtained: 0.892, theoretical: 0.907). Using an FVF ranging within [0.58, 0.82] and a mean inter-axon gap ranging within [0.1, 1.1] μm, MVF ranged within [0.32, 0.44] and fr ranged within [0.39, 0.71], which is consistent with the histology. The proposed algorithm is implemented in the open-source software AxonPacking (https://github.com/neuropoly/axonpacking) and can be useful for

  19. Modi ed strip packing heuristics for the rectangular variable-sized ...

    African Journals Online (AJOL)

    Two packing problems are considered in this paper, namely the well-known strip packing problem (SPP) and the variable-sized bin packing problem (VSBPP). A total of 252 strip packing heuristics (and variations thereof) from the literature, as well as novel heuristics proposed by the authors, are compared statistically by ...

  20. The Effect of Pharyngeal Packing during Nasal Surgery on the Incidence of Post Operative Nausea, Vomiting, and Sore Throat

    Directory of Open Access Journals (Sweden)

    Ali Karbasfrushan

    2014-10-01

    Full Text Available Introduction: Nausea and vomiting after ear, nose and throat (ENT surgery is one of the most common and notable problems facing anesthesiologists in this area. This study was conducted to determine the effect of a pharyngeal pack on the severity of nausea, vomiting, and sore throat among patients after ear, pharynx, and throat surgeries.   Materials and Methods: This randomized clinical study was performed in 140 patients (61 men and 79 women; age range, 20–40 years who had undergone nasal surgery in 2010. Patients were divided into two groups: the first group were treated using a pharyngeal pack (case group and the second group were managed without a pharyngeal pack (control group. Statistical analysis was performed using the Chi-square test and the Mann-Whitney U test. SPSS software was used for data analysis.   Results: The mean severity of nausea and vomiting in the two groups was 2.057, 1.371 and 1.100, respectively, with no significant differences between groups. However, the mean severity of sore throat was 1.714 in the group with the pharyngeal pack and 1.385 in the group without pharyngeal pack (P=0.010.   Conclusion:  Not only does a pharyngeal pack in ENT surgery not reduce the extent and severity of nausea and vomiting, but it also increases the severity of sore throat in patients when leaving the recovery room and discharging hospital.

  1. Performance of high-rate gravel-packed oil wells

    Energy Technology Data Exchange (ETDEWEB)

    Unneland, Trond

    2001-05-01

    Improved methods for the prediction, evaluation, and monitoring of performance in high-rate cased-hole gravel-packed oil wells are presented in this thesis. The ability to predict well performance prior to the gravel-pack operations, evaluate the results after the operation, and monitor well performance over time has been improved. This lifetime approach to performance analysis of gravel-packed oil wells contributes to increase oil production and field profitability. First, analytical models available for prediction of performance in gravel-packed oil wells are reviewed, with particular emphasis on high-velocity flow effects. From the analysis of field data from three North Sea oil fields, improved and calibrated cased-hole gravel-pack performance prediction models are presented. The recommended model is based on serial flow through formation sand and gravel in the perforation tunnels. In addition, new correlations for high-velocity flow in high-rate gravel-packed oil wells are introduced. Combined, this improves the performance prediction for gravel-packed oil wells, and specific areas can be targeted for optimized well design. Next, limitations in the current methods and alternative methods for evaluation and comparison of well performance are presented. The most widely used parameter, the skin factor, remains a convenient and important parameter. However, using the skin concept in direct comparisons between wells with different reservoir properties may result in misleading or even invalid conclusions. A discussion of the parameters affecting the skin value, with a clarification of limitations, is included. A methodology for evaluation and comparison of gravel-packed well performance is presented, and this includes the use of results from production logs and the use of effective perforation tunnel permeability as a parameter. This contributes to optimized operational procedures from well to well and from field to field. Finally, the data sources available for

  2. Important notice for Windows 2000 Service Pack 3 computers

    CERN Multimedia

    The NICE Team

    2005-01-01

    Microsoft is ending support for Windows 2000 Service Pack 3, which was introduced in 2002. As a consequence, computers running Windows 2000 Service Pack 3 (or older versions1)) must be updated. It is recommended that Windows 2000 computers be re-installed with Windows XP Service Pack 2 (see http://cern.ch/Win/Services/Installation/Diane). If this is not possible for compatibility reasons, Windows 2000 Service Pack 4 must be installed to ensure the computers continue to receive security patches (see http://cern.ch/Win/Docs/2000SP4). In the next few days, NICE 2000 computers requiring an update will receive a pop-up window with instructions. Users requiring help with the update can contact Helpdesk@cern.ch or call 78888. If your computer needs to be updated you are recommended to read the additional information available at http://cern.ch/Win/Docs/2000SP3. The NICE Team 1) To determine your Windows service pack version, use the ‘Start' button and select ‘Run'. In the new window that open...

  3. Important notice for Windows 2000 Service Pack 3 computers

    CERN Multimedia

    The NICE Team

    2005-01-01

    Microsoft is ending support for Windows 2000 Service Pack 3, which was introduced in 2002. As a consequence, computers running Windows 2000 Service Pack 3 (or older versions1) ) must be updated. It is recommended that Windows 2000 computers be re-installed with Windows XP Service Pack 2 (see http://cern.ch/Win/Services/Installation/Diane). If this is not possible for compatibility reasons, Windows 2000 Service Pack 4 must be installed to ensure the computers continue to receive security patches (see http://cern.ch/Win/Docs/2000SP4). In the next few days, NICE 2000 computers requiring an update will receive a pop-up window with instructions. Users requiring help with the update can contact Helpdesk@cern.ch or call 78888. If your computer needs to be updated you are recommended to read the additional information available at http://cern.ch/Win/Docs/2000SP3. The NICE Team 1) To determine your Windows service pack version, use the ‘Start' button and select ‘Run'. In the new window that opens, type ‘wi...

  4. SPH Modelling of Sea-ice Pack Dynamics

    Science.gov (United States)

    Staroszczyk, Ryszard

    2017-12-01

    The paper is concerned with the problem of sea-ice pack motion and deformation under the action of wind and water currents. Differential equations describing the dynamics of ice, with its very distinct mateFfigrial responses in converging and diverging flows, express the mass and linear momentum balances on the horizontal plane (the free surface of the ocean). These equations are solved by the fully Lagrangian method of smoothed particle hydrodynamics (SPH). Assuming that the ice behaviour can be approximated by a non-linearly viscous rheology, the proposed SPH model has been used to simulate the evolution of a sea-ice pack driven by wind drag stresses. The results of numerical simulations illustrate the evolution of an ice pack, including variations in ice thickness and ice area fraction in space and time. The effects of different initial ice pack configurations and of different conditions assumed at the coast-ice interface are examined. In particular, the SPH model is applied to a pack flow driven by a vortex wind to demonstrate how well the Lagrangian formulation can capture large deformations and displacements of sea ice.

  5. Studies of Particle Packings in Mixtures of Pharmaceutical Excipients

    Science.gov (United States)

    Bentham, Craig; Dutt, Meenakshi; Hancock, Bruno; Elliott, James

    2005-03-01

    Pharmaceutical powder blends used to generate tablets are complex multicomponent mixtures of the drug powder and excipients which facilitate the delivery of the required drug. The individual constituents of these blends can be noncohesive and cohesive powders. We study the geometric and mechanical characteristics of idealized mixtures of excipient particle packings, for a small but representative number of dry noncohesive particles, generated via gravitational compaction followed by uniaxial compaction. We discuss particle packings in 2- and 3- component mixtures of microcrystalline cellulose (MCC) & lactose and MCC, starch & lactose, respectively. We have computed the evolution of the force and stress distributions in monodisperse and polydisperse mixtures comprised of equal parts of each excipient; comparisons are made with results for particles packings of pure blends of MCC and lactose. We also compute the stress-strain relations for these mixtures. In order to obtain insight into details of the particle packings, we calculate the coordination number, packing fraction, radial distribution functions and contact angle distributions for the various mixtures. The numerical experiments have been performed on spheroidal idealizations of the excipient grains using Discrete Element Method simulations (Dutt et al., 2004 to be published).

  6. Spectral Action Models of Gravity on Packed Swiss Cheese Cosmology

    CERN Document Server

    Ball, Adam

    2015-01-01

    We present a model of (modified) gravity on spacetimes with fractal structure based on packing of spheres, which are (Euclidean) variants of the Packed Swiss Cheese Cosmology models. As the action functional for gravity we consider the spectral action of noncommutative geometry, and we compute its asymptotic expansion on a space obtained as an Apollonian packing of 3-dimensional spheres inside a 4-dimensional ball. Using information from the zeta function of the Dirac operator of the spectral triple, we show that the leading terms in the asymptotic expansion of the spectral action consist of a zeta regularization of the divergent sum of the leading terms of the spectral actions of the individual spheres in the packing, which accounts for the contribution of the points 1 and 3 in the dimension spectrum (as in the case of a 3-sphere). There is also an additional term coming from the residue at the additional point in the dimension spectrum that corresponds to the packing constant. It detects the fractality of t...

  7. Controlling Blown Pack Spoilage Using Anti-Microbial Packaging.

    Science.gov (United States)

    Reid, Rachael; Bolton, Declan; Tiuftin, Andrey A; Kerry, Joe P; Fanning, Séamus; Whyte, Paul

    2017-08-12

    Active (anti-microbial) packaging was prepared using three different formulations; Auranta FV; Inbac-MDA and sodium octanoate at two concentrations (2.5 and 3.5 times their minimum inhibitory concentration (MIC, the lowest concentration that will inhibit the visible growth of the organisms) against Clostridium estertheticum, DSMZ 8809). Inoculated beef samples were packaged using the active packaging and monitored for 100 days storage at 2 °C for blown pack spoilage. The time to the onset of blown pack spoilage was significantly (p < 0.01) increased using Auranta FV and sodium octanoate (caprylic acid sodium salt) at both concentrations. Moreover, sodium octanoate packs had significantly (p < 0.01) delayed blown pack spoilage as compared to Auranta FV. It was therefore concluded that Auranta FV or sodium octanoate, incorporated into the packaging materials used for vacuum packaged beef, would inhibit blown pack spoilage and in the case of the latter, well beyond the 42 days storage period currently required for beef primals.

  8. Porphyrin Tests

    Science.gov (United States)

    ... safe and unsafe drugs, different sites use different classifications and the lists are not the same. Why ... Kathleen D. & Pagana, Timothy J. (2001). M osby's Diagnostic and Laboratory Test Reference 5th Edition: Mosby, Inc., ...

  9. Safe and effective use of medicines for ethnic minorities

    DEFF Research Database (Denmark)

    Dam, Pernille; El-Souri, Mira Mahmoud; Herborg, Hanne

    2015-01-01

    to the intervention. Conclusion: The counseling program “Safe and effective use of medicines” was successfully adapted to unemployed ethnic minority patients, and tested in a new collaboration between job centers and community pharmacies. The counseling program resulted in statistically significant improvements......, there was a need to adapt a previously developed and validated medicine-based intervention “safe and effective use of medicines” to this vulnerable group of unemployed ethnic minority patients. Methods: The objective of this before-after study was to improve medicines adherence, health status and work ability...... of the target group through an individualized pharmacist delivered intervention with focus on safe and effective implementation of medical treatments. The target group was ethnic minorities of non-western origin affiliated with a job center. Results: At baseline, 35.7 % of the patients had a potential adherence...

  10. Hydro-Balanced Stuffing Box field test

    Energy Technology Data Exchange (ETDEWEB)

    Giangiacomo, L.A.

    1999-05-28

    The Hydro-Balanced Stuffing Box is a seal assembly for polished rod pumping installations commonly used in oil and gas pumping well installations to contain produced well fluids. The improved stuffing box was developed and patented by Harold H. Palmour of The Palmour Group of Livingston, TX. The stuffing box is designed to reduce the incidence of seal leakage and to utilize an environmentally safe fluid, so that if there is any leakage, environmental damage is reduced or eliminated. The unit was tested on two wells at the Rocky Mountain Oilfield Testing Center. During the test period, the performance of the stuffing box was measured by monitoring the pressure on the tubing and the inner chamber with a Barton Two-pen recorder. The amount of safe fluid consumed, fluid leakage at the top of the stuffing box, pressure supplied from the nitrogen bottle, ambient temperature, and polish rod temperature was recorded. The stuffing box is capable of providing a better seal between well fluids an d the environment than conventional stuffing boxes. It allows the polished rod to operate cooler and with lubrication, extending the life of the packing elements, and reducing the amount of attention required to prevent leakage.

  11. THE EFFECT OF THE THICKNESS OF A PACKED BED ON THE DYNAMIC AND THERMAL BEHAVIOR OF A SOLAR DRYER

    Directory of Open Access Journals (Sweden)

    S KHALDI

    2015-06-01

    Full Text Available Drying food in the sun is a safe, easy and economical way to preserve food, especially fruits. Cabinet dryers are the most popular equipment for fruit drying. Because of intermittent nature of solar energy, storage is required for uninterrupted supply in order to match the needs. The main objective of this study is to assess effectiveness of continuous solar dryer integrated with packed bed as thermal storage with natural airflow for drying figs (Ficuscarica. The cabinet dryer were envisaged theoretically (computational fluid dynamics (CFD. The distribution of the velocity and temperature of air within the solar dryer were presented during one day of August and under the climate conditions of Tlemcen (Algeria.  The effects of presence of a packed bed on the distribution of velocity and temperature of airflow and on the temperature of figs were analyzed. The results show that the solar dryer design, incorporating a packed bed enhances the capabilities and performance of the solar dryer, through increasing time of drying.

  12. The design of the SAFE or SORRY? study: a cluster randomised trial on the development and testing of an evidence based inpatient safety program for the prevention of adverse events

    Directory of Open Access Journals (Sweden)

    Koopmans Raymond TCM

    2009-04-01

    Full Text Available Abstract Background Patients in hospitals and nursing homes are at risk of the development of, often preventable, adverse events (AEs, which threaten patient safety. Guidelines for prevention of many types of AEs are available, however, compliance with these guidelines appears to be lacking. Besides general barriers that inhibit implementation, this non-compliance is associated with the large number of guidelines competing for attention. As implementation of a guideline is time-consuming, it is difficult for organisations to implement all available guidelines. Another problem is lack of feedback about performance using quality indicators of guideline based care and lack of a recognisable, unambiguous system for implementation. A program that allows organisations to implement multiple guidelines simultaneously may facilitate guideline use and thus improve patient safety. The aim of this study is to develop and test such an integral patient safety program that addresses several AEs simultaneously in hospitals and nursing homes. This paper reports the design of this study. Methods and design The patient safety program addresses three AEs: pressure ulcers, falls and urinary tract infections. It consists of bundles and outcome and process indicators based on the existing evidence based guidelines. In addition it includes a multifaceted tailored implementation strategy: education, patient involvement, and a computerized registration and feedback system. The patient safety program was tested in a cluster randomised trial on ten hospital wards and ten nursing home wards. The baseline period was three months followed by the implementation of the patient safety program for fourteen months. Subsequently the follow-up period was nine months. Primary outcome measure was the incidence of AEs on every ward. Secondary outcome measures were the utilization of preventive interventions and the knowledge of nurses regarding the three topics. Randomisation took

  13. The design of the SAFE or SORRY? study: a cluster randomised trial on the development and testing of an evidence based inpatient safety program for the prevention of adverse events.

    Science.gov (United States)

    van Gaal, Betsie G I; Schoonhoven, Lisette; Hulscher, Marlies E J L; Mintjes, Joke A J; Borm, George F; Koopmans, Raymond T C M; van Achterberg, Theo

    2009-04-01

    Patients in hospitals and nursing homes are at risk of the development of, often preventable, adverse events (AEs), which threaten patient safety. Guidelines for prevention of many types of AEs are available, however, compliance with these guidelines appears to be lacking. Besides general barriers that inhibit implementation, this non-compliance is associated with the large number of guidelines competing for attention. As implementation of a guideline is time-consuming, it is difficult for organisations to implement all available guidelines. Another problem is lack of feedback about performance using quality indicators of guideline based care and lack of a recognisable, unambiguous system for implementation. A program that allows organisations to implement multiple guidelines simultaneously may facilitate guideline use and thus improve patient safety.The aim of this study is to develop and test such an integral patient safety program that addresses several AEs simultaneously in hospitals and nursing homes. This paper reports the design of this study. The patient safety program addresses three AEs: pressure ulcers, falls and urinary tract infections. It consists of bundles and outcome and process indicators based on the existing evidence based guidelines. In addition it includes a multifaceted tailored implementation strategy: education, patient involvement, and a computerized registration and feedback system. The patient safety program was tested in a cluster randomised trial on ten hospital wards and ten nursing home wards. The baseline period was three months followed by the implementation of the patient safety program for fourteen months. Subsequently the follow-up period was nine months. Primary outcome measure was the incidence of AEs on every ward. Secondary outcome measures were the utilization of preventive interventions and the knowledge of nurses regarding the three topics. Randomisation took place on ward level. The results will be analysed separately

  14. The design of the SAFE or SORRY? study: a cluster randomised trial on the development and testing of an evidence based inpatient safety program for the prevention of adverse events

    Science.gov (United States)

    van Gaal, Betsie GI; Schoonhoven, Lisette; Hulscher, Marlies EJL; Mintjes, Joke AJ; Borm, George F; Koopmans, Raymond TCM; van Achterberg, Theo

    2009-01-01

    Background Patients in hospitals and nursing homes are at risk of the development of, often preventable, adverse events (AEs), which threaten patient safety. Guidelines for prevention of many types of AEs are available, however, compliance with these guidelines appears to be lacking. Besides general barriers that inhibit implementation, this non-compliance is associated with the large number of guidelines competing for attention. As implementation of a guideline is time-consuming, it is difficult for organisations to implement all available guidelines. Another problem is lack of feedback about performance using quality indicators of guideline based care and lack of a recognisable, unambiguous system for implementation. A program that allows organisations to implement multiple guidelines simultaneously may facilitate guideline use and thus improve patient safety. The aim of this study is to develop and test such an integral patient safety program that addresses several AEs simultaneously in hospitals and nursing homes. This paper reports the design of this study. Methods and design The patient safety program addresses three AEs: pressure ulcers, falls and urinary tract infections. It consists of bundles and outcome and process indicators based on the existing evidence based guidelines. In addition it includes a multifaceted tailored implementation strategy: education, patient involvement, and a computerized registration and feedback system. The patient safety program was tested in a cluster randomised trial on ten hospital wards and ten nursing home wards. The baseline period was three months followed by the implementation of the patient safety program for fourteen months. Subsequently the follow-up period was nine months. Primary outcome measure was the incidence of AEs on every ward. Secondary outcome measures were the utilization of preventive interventions and the knowledge of nurses regarding the three topics. Randomisation took place on ward level. The results

  15. EFFECTS OF CEMENTATION ON HYDRAULIC CONDUCTIVITY AND ON MECHANICAL STRENGTH OF BINARY PACKING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Lucimar Arruda Viana

    Full Text Available ABSTRACT This paper addresses the topic soil stabilization for forest roads applications and analyzes the influence of the hydrated lime in structuring the sand fraction of an artificial soil composed of the sand fractions of two natural soils, simulating natural process of cementation of sands and using binary packing systems. The study included the following topics: (i characterization of the mechanical strength and hydraulic conductivity of binary systems of the artificial soil; and (ii effect of hydrated lime in structuring binary packing systems of the artificial soil. Soil samples were submitted to chemical pre-treatment, to obtain clean sand fractions from the two sandy soils with particle diameters ranging from 0.053 to 2 mm, following sieving and separation of them in twenty-two classes with maximum (D/minimum (d ratios varying from 5.7 to 13.4. Sequentially, binary packing specimens of the artificial soil were prepared and then stabilized with 2% of a commercial hydrated lime. Next, the specimens were submitted to permeability and quasi-static cone penetration tests, in order to determine their hydraulic conductivity and cone tip resistance. Based on the obtained results, it was concluded that: (i in the artificial soil, an increase of D/d ratio led to an increase of cone tip resistance and decrease of hydraulic conductivity; and (ii cementation with hydrated lime reduced the hydraulic conductivity and increased the cone tip resistance.

  16. An Acausal Li-Ion Battery Pack Model for Automotive Applications

    Directory of Open Access Journals (Sweden)

    Kotub Uddin

    2014-08-01

    Full Text Available In this work, a novel acausal and reconfigurable battery pack model is presented. The model structure adopted for the battery cell is based on an equivalent circuit representation. The circuit elements are modified to take account of both hysteresis and diffusion limitation. The latter is known to be a nonlinear function of large operating currents or long operating times. It is shown that the integration of a current dependent time constant within the cell model better emulates the solid diffusional dynamics of lithium intercalation into the active material under large electrical loads. The advantages of an acausal modeling approach, when scaling-up individual cell models into a complete battery system are also presented. Particular consideration is given to emulating the impact of cell to cell variations on pack performance. Using statistical analysis of battery tests, cell model parameter variations are characterized and quantified. The cell and scaled-up pack model are parameterized for a number of commercially available cell formats, energy capacities and chemistries. The new models are validated using transient, real-world, electrical data measured from an electric vehicle (EV operating within an urban environment.

  17. Development and validation of the Palliative Care Knowledge Scale (PaCKS).

    Science.gov (United States)

    Kozlov, Elissa; Carpenter, Brian D; Rodebaugh, Thomas L

    2017-10-01

    The purpose of this study was to develop a reliable and valid scale that broadly measures knowledge about palliative care among non-healthcare professionals. An initial item pool of 38 true/false questions was developed based on extensive qualitative and quantitative pilot research. The preliminary items were tested with a community sample of 614 adults aged 18-89 years as well as 30 palliative care professionals. The factor structure, reliability, stability, internal consistency, and validity of the 13-item Palliative Care Knowledge Scale (PaCKS) were assessed. The results of our study indicate that the PaCKS meets or exceeds the standards for psychometric scale development. Prior to this study, there were no psychometrically evaluated scales with which to assess knowledge of palliative care. Our study developed the PaCKS, which is valid for assessing knowledge about palliative services in the general population. With the successful development of this instrument, new research exploring how knowledge about palliative care influences access and utilization of the service is possible. Prior research in palliative care access and utilization has not assessed knowledge of palliative care, though many studies have suggested that knowledge deficits contribute to underutilization of these services. Creating a scale that measures knowledge about palliative care is a critical first step toward understanding and combating potential barriers to access and utilization of this life-improving service.

  18. Relative Packing Groups in Template-Based Structure Prediction: Cooperative Effects of True Positive Constraints

    Science.gov (United States)

    Day, Ryan; Qu, Xiaotao; Swanson, Rosemarie; Bohannan, Zach; Bliss, Robert

    2011-01-01

    Abstract Most current template-based structure prediction methods concentrate on finding the correct backbone conformation and then packing sidechains within that backbone. Our packing-based method derives distance constraints from conserved relative packing groups (RPGs). In our refinement approach, the RPGs provide a level of resolution that restrains global topology while allowing conformational sampling. In this study, we test our template-based structure prediction method using 51 prediction units from CASP7 experiments. RPG-based constraints are able to substantially improve approximately two-thirds of starting templates. Upon deeper investigation, we find that true positive spatial constraints, especially those non-local in sequence, derived from the RPGs were important to building nearer native models. Surprisingly, the fraction of incorrect or false positive constraints does not strongly influence the quality of the final candidate. This result indicates that our RPG-based true positive constraints sample the self-consistent, cooperative interactions of the native structure. The lack of such reinforcing cooperativity explains the weaker effect of false positive constraints. Generally, these findings are encouraging indications that RPGs will improve template-based structure prediction. PMID:21210729

  19. Safe Sex Tips for Seniors

    Science.gov (United States)

    ... and whether you’ve ever injected illegal drugs. HIV/AIDS can also be spread via shared hypodermic needles, though the most common risk factor for older women is sex with an infected man. Consider getting tested first The best way to protect yourself and your partner is for ...

  20. The Malawi Safe Motherhood Project

    African Journals Online (AJOL)

    The maternal mortality ratio in Malawi is currently estimated to be 620 per ... maternal mortality. The indicators proposed use'the rationale that critical pathways to reducing maternal mortality include improvements to the accessibility, utilisation and quality of care for the ... development, operations research and field testing.

  1. Simple, Compact, Safe Impact Tester

    Science.gov (United States)

    Roach, Pat R.; Feller, Jeffrey

    2007-01-01

    An apparatus has been designed and built for testing the effects, on moderate-sized objects, of cushioned decelerations having magnitudes ranging up to several hundred g [where g = normal Earth gravitational acceleration (approximately 9.8 m/s(exp 2))].

  2. Packaging colour research by tobacco companies: the pack as a product characteristic.

    Science.gov (United States)

    Lempert, Lauren K; Glantz, Stanton

    2017-05-01

    Tobacco companies use colour on cigarette packaging and labelling to communicate brand imagery, diminish health concerns, and as a replacement for prohibited descriptive words ('light' and 'mild') to make misleading claims about reduced risks. We analysed previously secret tobacco industry documents to identify additional ways in which cigarette companies tested and manipulated pack colours to affect consumers' perceptions of the cigarettes' flavour and strength. Cigarette companies' approach to package design is based on 'sensation transference' in which consumers transfer sensations they derive from the packaging to the product itself. Companies manipulate consumers' perceptions of the taste and strength of cigarettes by changing the colour of the packaging. For example, even without changes to the tobacco blends, flavourings or additives, consumers perceive the taste of cigarettes in packages with red and darker colours to be fuller flavoured and stronger, and cigarettes in packs with more white and lighter colours are perceived to taste lighter and be less harmful. Companies use pack colours to manipulate consumers' perceptions of the taste, strength and health impacts of the cigarettes inside the packs, thereby altering their characteristics and effectively creating new products. In countries that do not require standardised packaging, regulators should consider colour equivalently to other changes in cigarette characteristics (eg, physical characteristics, ingredients, additives and flavourings) when making determinations about whether or not to permit new products on the market. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  3. Virtual and Experimental Visualization of Flows in Packed Beds of Spheres Simulating Porous Media Flows

    Science.gov (United States)

    Hendricks, R. C.; Athavale, M. M.; Lattime, S. B.; Braun, M. J.

    1998-01-01

    A videotape presentation of flow in a packed bed of spheres is provided. The flow experiment consisted of three principal elements: (1) an oil tunnel 76.2 mm by 76.2 mm in cross section, (2) a packed bed of spheres in regular and irregular arrays, and (3) a flow characterization methodology, either (a) full flow field tracking (FFFT) or (b) computational fluid dynamic (CFD) simulation. The refraction indices of the oil and the test array of spheres were closely matched, and the flow was seeded with aluminum oxide particles. Planar laser light provided a two-dimensional projection of the flow field, and a traverse simulated a three-dimensional image of the entire flow field. Light focusing and reflection rendered the spheres black, permitting visualization of the planar circular interfaces in both the axial and transverse directions. Flows were observed near the wall-sphere interface and within the set of spheres. The CFD model required that a representative section of a packed bed be formed and gridded, enclosing and cutting six spheres so that symmetry conditions could be imposed at all cross-boundaries. Simulations had to be made with the flow direction at right angles to that used in the experiments, however, to take advantage of flow symmetry. Careful attention to detail was required for proper gridding. The flow field was three-dimensional and complex to describe, yet the most prominent finding was flow threads, as computed in the representative 'cube' of spheres with face symmetry and conclusively demonstrated experimentally herein. Random packing and bed voids tended to disrupt the laminar flow, creating vortices.

  4. Packing properties 1-alkanols and alkanes in a phospholipid membrane

    DEFF Research Database (Denmark)

    Westh, Peter

    2006-01-01

    and long chain alcohols. On the basis of these observations, previously published information on the structure of the membrane-solute complexes and the free volume properties of (pure) phospholipid membranes, we suggest that two effects dominate the packing properties of hydrophobic solutes in DMPC. First......, perturbation of the tightly packed interfacial zone around the ester bonds and first few methylene groups of DMPC brings about a positive contribution to Vm(puremem). This effect dominates the volume behavior for alcohols like 1-butanol, 1-pentanol and 1-hexanol. More hydrophobic solutes penetrate......We have used vibrating tube densitometry to investigate the packing properties of four alkanes and a homologous series of ten alcohols in fluid-phase membranes of dimyristoyl phosphatidylcholine (DMPC). It was found that the volume change of transferring these compounds from their pure states...

  5. Experimental study of a rotating packed bed distillation column

    Directory of Open Access Journals (Sweden)

    J. V. S. Nascimento

    2009-03-01

    Full Text Available The purpose of this work was to study the mass transfer performance of rotating packed beds applying the "Higee" process. The operations were carried out with the n-hexane/n-heptane distilling system at atmospheric pressure and under total reflux conditions. The rotating speed could be varied between 300 and 2500 rpm, which provided centrifugal forces from 5 to 316 times the Earth's gravity. The effects of concentration, vapor velocity, rotating speed and packing type (two different Raschig ring sizes and structured wire mesh packing on mass transfer behavior were analyzed. Experimental results showed that the mass transfer coefficient depends on the liquid flow rates and rotating speed. The equipment had high separation efficiency in a reduced bed volume.

  6. Process enhancement of supercritical methanol biodiesel production by packing beds.

    Science.gov (United States)

    Qiao, Bao-Quan; Zhou, Dan; Li, Gen; Yin, Jian-Zhong; Xue, Song; Liu, Jiao

    2017-03-01

    Continuous fixed bed reactors filled by three kinds of packing which were glass bead, glass spring and Dixon rings were investigated. The effect of temperature, pressure, the molar ratio of methanol to oil, flow rate, the size and shape of the packing were researched. The highest yield 90.84% of FAME was obtained by filling Dixon rings as packing with the condition of the temperature was 350°C, the pressure was 22MPa, the molar ratio of methanol to oil was 42:1. In addition, the reusability of Dixon rings was perfect. Numerical simulation was researched to provide theoretical basis for experimental results, besides the kinetics and thermodynamics behavior were investigated to explore the reaction mechanism. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. FY-87 packing fabrication techniques (commercial waste form) results

    Energy Technology Data Exchange (ETDEWEB)

    Werry, E.V.; Gates, T.E.; Cabbage, K.S.; Eklund, J.D.

    1988-04-01

    This report covers the investigation of fabrication techniques associated with the development of suitable materials and methods to provide a prefabricated packing for waste packages for the Basalt Waste Isolation Project (BWIP). The principal functions of the packing are to minimize container corrosion during the 300 to 1000 years following repository closure and provide long-term control of the release of radionuclides from the waste package. The investigative work, discussed in this report, was specifically conceived to develop the design criteria for production of full-scale prototypical packing rings. The investigative work included the preparation of procedures, the preparation of fabrication materials, physical properties, and the determination of the engineering properties. The principal activities were the preparation of the materials and the determination of the physical properties. 21 refs., 20 figs., 14 tabs.

  8. A Heuristic Algorithm for Solving Triangle Packing Problem

    Directory of Open Access Journals (Sweden)

    Ruimin Wang

    2013-01-01

    Full Text Available The research on the triangle packing problem has important theoretic significance, which has broad application prospects in material processing, network resource optimization, and so forth. Generally speaking, the orientation of the triangle should be limited in advance, since the triangle packing problem is NP-hard and has continuous properties. For example, the polygon is not allowed to rotate; then, the approximate solution can be obtained by optimization method. This paper studies the triangle packing problem by a new kind of method. Such concepts as angle region, corner-occupying action, corner-occupying strategy, and edge-conjoining strategy are presented in this paper. In addition, an edge-conjoining and corner-occupying algorithm is designed, which is to obtain an approximate solution. It is demonstrated that the proposed algorithm is highly efficient, and by the time complexity analysis and the analogue experiment result is found.

  9. Polymer ultrapermeability from the inefficient packing of 2D chains

    Science.gov (United States)

    Rose, Ian; Bezzu, C. Grazia; Carta, Mariolino; Comesaña-Gándara, Bibiana; Lasseuguette, Elsa; Ferrari, M. Chiara; Bernardo, Paola; Clarizia, Gabriele; Fuoco, Alessio; Jansen, Johannes C.; Hart, Kyle E.; Liyana-Arachchi, Thilanga P.; Colina, Coray M.; McKeown, Neil B.

    2017-09-01

    The promise of ultrapermeable polymers, such as poly(trimethylsilylpropyne) (PTMSP), for reducing the size and increasing the efficiency of membranes for gas separations remains unfulfilled due to their poor selectivity. We report an ultrapermeable polymer of intrinsic microporosity (PIM-TMN-Trip) that is substantially more selective than PTMSP. From molecular simulations and experimental measurement we find that the inefficient packing of the two-dimensional (2D) chains of PIM-TMN-Trip generates a high concentration of both small (polymers with three-dimensional (3D) contorted chains confirm that its additional intrinsic microporosity is generated from the awkward packing of its 2D polymer chains in a 3D amorphous solid. This strategy of shape-directed packing of chains of microporous polymers may be applied to other rigid polymers for gas separations.

  10. Developing a state-wide infrastructure for safe sleep promotion.

    Science.gov (United States)

    Ahlers-Schmidt, Carolyn R; Schunn, Christy; Kuhlmann, Stephanie; Kuhlmann, Zachary; Engel, Matthew

    2017-08-01

    Sleep-related deaths are the third leading cause of infant death in Kansas. This manuscript describes implementation of an infrastructure of regional trainers to educate on the American Academy of Pediatrics safe sleep recommendations. Prospective evaluation of training program on knowledge transfer. Instructors were recruited from throughout the state of Kansas and trained to provide safe sleep education in their communities. Instructors were a mix of healthcare workers and community members. Their trainees encompassed both professionals and caregivers. Instructors attended a 2-day training, including completing 18-item pre and post-training knowledge tests, a training evaluation survey, and performing a portion of the structured safe sleep presentation and crib demonstration for feedback. Instructors were evaluated before and after training. After conducting trainings in their region, instructors submitted trainees' pre and post-test results. Scores were compared using t-test. Twenty-three instructors were trained. Scores averaged 13.5 (SD=2.4) for the pre-test and 15.3 (SD=2.4) for the post-test. Those scoring sleep education at 21 events to a total of 378 trainees. Trainee scores averaged 11.4 (SD=2.7) on the pre-test and increased to 13.9 (SD=2.5) on the post-test (Psleep instructors can be trained to disseminate safe sleep guidelines; however, only half provided at least 1 training within 1 year. Future recommendations include over-recruiting potential instructors, incorporating trainings into existing positions or otherwise incentivizing trainers. Copyright © 2017 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

  11. MP:PD--a data base of internal packing densities, internal packing defects and internal waters of helical membrane proteins.

    Science.gov (United States)

    Rose, Alexander; Theune, Dominic; Goede, Andrean; Hildebrand, Peter W

    2014-01-01

    The membrane protein packing database (MP:PD) (http://proteinformatics.charite.de/mppd) is a database of helical membrane proteins featuring internal atomic packing densities, cavities and waters. Membrane proteins are not tightly packed but contain a considerable number of internal cavities that differ in volume, polarity and solvent accessibility as well as in their filling with internal water. Internal cavities are supposed to be regions of high physical compressibility. By serving as mobile hydrogen bonding donors or acceptors, internal waters likely facilitate transition between different functional states. Despite these distinct functional roles, internal cavities of helical membrane proteins are not well characterized, mainly because most internal waters are not resolved by crystal structure analysis. Here we combined various computational biophysical techniques to characterize internal cavities, reassign positions of internal waters and calculate internal packing densities of all available helical membrane protein structures and stored them in MP:PD. The database can be searched using keywords and entries can be downloaded. Each entry can be visualized in Provi, a Jmol-based protein viewer that provides an integrated display of low energy waters alongside membrane planes, internal packing density, hydrophobic cavities and hydrogen bonds.

  12. How Can I Lose Weight Safely?

    Science.gov (United States)

    ... Abuse Love and Romance Understanding Other People How Can I Lose Weight Safely? KidsHealth > For Teens > How Can I Lose Weight Safely? Print A A A ... to talk to a doctor or dietitian, who can compare your weight with healthy norms to help ...

  13. Creating Safe Spaces for Music Learning

    Science.gov (United States)

    Hendricks, Karin S.; Smith, Tawnya D.; Stanuch, Jennifer

    2014-01-01

    This article offers a practical model for fostering emotionally safe learning environments that instill in music students a positive sense of self-belief, freedom, and purpose. The authors examine the implications for music educators of creating effective learning environments and present recommendations for creating a safe space for learning,…

  14. Virus Alert: Ten Steps to Safe Computing.

    Science.gov (United States)

    Gunter, Glenda A.

    1997-01-01

    Discusses computer viruses and explains how to detect them; discusses virus protection and the need to update antivirus software; and offers 10 safe computing tips, including scanning floppy disks and commercial software, how to safely download files from the Internet, avoiding pirated software copies, and backing up files. (LRW)

  15. A fail-safe CMOS logic gate

    Science.gov (United States)

    Bobin, V.; Whitaker, S.

    1990-01-01

    This paper reports a design technique to make Complex CMOS Gates fail-safe for a class of faults. Two classes of faults are defined. The fail-safe design presented has limited fault-tolerance capability. Multiple faults are also covered.

  16. Improved water does not mean safe water

    Science.gov (United States)

    MacDonald, L. H.; Guo, Y.; Schwab, K. J.

    2012-12-01

    This work presents a model for estimating global access to drinking water that meets World Health Organization (WHO) water quality guidelines. The currently accepted international estimate of global access to safe water, the WHO and United Nations Children's Fund's (UNICEF) Joint Monitoring Program (JMP) report, estimates the population with access to water service infrastructure that is classified as improved and unimproved. The JMP report uses access to improved water sources as a proxy for access to safe water, but improved water sources do not always meet drinking water quality guidelines. Therefore, this report likely overestimates the number of people with access to safe water. Based on the JMP estimate, the United Nations has recently announced that the world has reached the Millennium Development Goal (MDG) target for access to safe water. Our new framework employs a statistical model that incorporates source water quality, water supply interruptions, water storage practices, and point of use water treatment to estimate access to safe water, resulting in a figure that is lower than the JMP estimate of global access to safe water. We estimate that at least 28% of the world does not have access to safe water today, as compared to the JMP estimate of 12%. These findings indicate that much more work is needed on the international scale to meet the MDG target for access to safe water.

  17. Safely splicing glass optical fibers

    Science.gov (United States)

    Korbelak, K.

    1980-01-01

    Field-repair technique fuses glass fibers in flammable environment. Apparatus consists of v-groove vacuum chucks on manipulators, high-voltage dc power supply and tungsten electrodes, microscope to observe joint alignment and fusion, means of test transmission through joint. Apparatus is enclosed in gas tight bos filled with inert gas during fusion. About 2 feet of fiber end are necessary for splicing.

  18. Modeling the growth of Lactobacillus viridescens under non-isothermal conditions in vacuum-packed sliced ham.

    Science.gov (United States)

    Silva, Nathália Buss da; Longhi, Daniel Angelo; Martins, Wiaslan Figueiredo; Laurindo, João Borges; Aragão, Gláucia Maria Falcão de; Carciofi, Bruno Augusto Mattar

    2017-01-02

    Lactic acid bacteria (LAB) are responsible for spoiling vacuum-packed meat products, such as ham. Since the temperature is the main factor affecting the microbial dynamic, the use of mathematical models describing the microbial behavior into a non-isothermal environment can be very useful for predicting food shelf life. In this study, the growth of Lactobacillus viridescens was measured in vacuum-packed sliced ham under non-isothermal conditions, and the predictive ability of primary (Baranyi and Roberts, 1994) and secondary (Square Root) models were assessed using parameters estimated in MRS culture medium under isothermal conditions (between 4 and 30°C). Fresh ham piece was sterilized, sliced, inoculated, vacuum-packed, and stored in a temperature-controlled incubator at five different non-isothermal conditions (between 4 and 25°C) and one isothermal condition (8°C). The mathematical models obtained in MRS medium were assessed by comparing predicted values with L. viridescens growth data in vacuum-packed ham. Its predictive ability was assessed through statistical indexes, with good results (bias factor between 0.95 and 1.03; accuracy factor between 1.04 and 1.07, and RMSE between 0.76 and 1.33), especially in increasing temperature, which predictions were safe. The model parameters obtained from isothermal growth data in MRS medium enabled to estimate the shelf life of a commercial ham under non-isothermal conditions in the temperature range analyzed. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Genetic Testing (For Parents)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Genetic Testing KidsHealth / For Parents / Genetic Testing What's in ... blood, skin, bone, or other tissue is needed. Genetic Testing During Pregnancy For genetic testing before birth, ...

  20. Testing Backbone.js

    CERN Document Server

    Roemer, Ryan

    2013-01-01

    This book is packed with the step by step tutorial and instructions in recipe format helping you setup test infrastructure and gradually advance your skills to plan, develop, and test your backbone applications.If you are a JavaScript developer looking for recipes to create and implement test support for your backbone application, then this book is ideal for you.

  1. Safe and optimized used fuel management

    Energy Technology Data Exchange (ETDEWEB)

    Chiguer, M.; Casablanca, J. L.

    2012-07-01

    A Post-Fukushima perspective This paper lists and briefly describes challenges and issues at stake that used Fuel Management will be facing at existing spent fuel p001 at reactors in operation or permanently shutdown in the aftermath of Fukushima and upcoming stress tests and beyond. It is also an attempt to jet from the perspective of AREVA, existing and proven products and services going along risk reduction strategies that may be of value to adequate protection that appropriately balances defence-in-depth and risk considerations as far as Used Fuel Management is considered and this from the very starting point namely the unloading of used fuel at SFP. Over the past decades, AREVA never stops enhancing used fuel recycling performances and developing innovative solutions to respond to plant, utility or country related constraints. This will be illustrated through a few business cases that best describe the various proven solutions and implemented contractual schemes for the safe and optimized management of used fuel today.

  2. Involvement of Clostridium gasigenes and C. algidicarnis in 'blown pack' spoilage of Brazilian vacuum-packed beef.

    Science.gov (United States)

    Silva, Alessandra R; Paulo, Ezio N; Sant'Ana, Anderson S; Chaves, Rafael D; Massaguer, Pilar R

    2011-08-15

    The objectives of this study were to isolate psychrotrophic clostridia from Brazilian vacuum-packed beef cuts (spoiled or not) and to identify the isolates by using 16S rRNA gene sequencing. Anaerobic psychrotrophic microorganisms were also enumerated and samples were collected to verify the incidence of psychrotrophic clostridia in the abattoir environment. Vacuum-packed beef cuts (n=8 grossly distended and n=5 non-spoiled) and environmental samples were obtained from a beef packing plant located in the state of São Paulo, Brazil. Each sample was divided in three subsamples (exudate, beef surface and beef core) that were analyzed for vegetative forms, total spore-forming, and sulfide reducing spore-forming, both activated by alcohol and heat. Biochemical profiles of the isolates were obtained using API20A, with further identification using 16S rRNA gene sequencing. The growth temperature and the pH range were also assessed. Populations of psychrotrophic anaerobic vegetative microorganisms of up to 10(10)CFU/(g, mL or 100 cm(2)) were found in 'blown pack' samples, while in non-spoiled samples populations of 10(5)CFU/(g, CFU/mL or CFU/100 cm(2)) was found. Overall, a higher population of total spores and sulfide reducing spores activated by heat in spoiled samples was found. Clostridium gasigenes (n=10) and C. algidicarnis (n=2) were identified using 16S rRNA gene sequencing. Among the ten C. gasigenes isolates, six were from spoiled samples (C1, C2 and C9), two were isolated from non-spoiled samples (C4 and C5) and two were isolated from the hide and the abattoir corridor/beef cut conveyor belt. C. algidicarnis was recovered from spoiled beef packs (C2). Although some samples (C3, C7, C10 and C14) presented signs of 'blown pack' spoilage, Clostridium was not recovered. C. algidicarnis (n=1) and C. gasigenes (n=9) isolates have shown a psychrotrophic behavior, grew in the range 6.2-8.2. This is the first report on the isolation of psychrotrophic Clostridium (C

  3. Destabilization of confined granular packings due to fluid flow

    Science.gov (United States)

    Monloubou, Martin; Sandnes, Bjørnar

    2016-04-01

    Fluid flow through granular materials can cause fluidization when fluid drag exceeds the frictional stress within the packing. Fluid driven failure of granular packings is observed in both natural and engineered settings, e.g. soil liquefaction and flowback of proppants during hydraulic fracturing operations. We study experimentally the destabilization and flow of an unconsolidated granular packing subjected to a point source fluid withdrawal using a model system consisting of a vertical Hele-Shaw cell containing a water-grain mixture. The fluid is withdrawn from the cell at a constant rate, and the emerging flow patterns are imaged in time-lapse mode. Using Particle Image Velocimetry (PIV), we show that the granular flow gets localized in a narrow channel down the center of the cell, and adopts a Gaussian velocity profile similar to those observed in dry grain flows in silos. We investigate the effects of the experimental parameters (flow rate, grain size, grain shape, fluid viscosity) on the packing destabilization, and identify the physical mechanisms responsible for the observed complex flow behaviour.

  4. Social Interactions Sparked by Pictorial Warnings on Cigarette Packs

    Directory of Open Access Journals (Sweden)

    Marissa G. Hall

    2015-10-01

    Full Text Available The Message Impact Framework suggests that social interactions may offer smokers the opportunity to process pictorial warnings on cigarette packs more deeply. We aimed to describe adult smokers’ social interactions about pictorial cigarette pack warnings in two longitudinal pilot studies. In Pilot Study 1, 30 smokers used cigarette packs with one of nine pictorial warnings for two weeks. In Pilot Study 2, 46 smokers used cigarette packs with one of five pictorial warnings for four weeks. Nearly all smokers (97%/96% in Pilot Study 1/2 talked about the warnings with other people, with the most common people being friends (67%/87% and spouses/significant others (34%/42%. Pilot Study 2 found that 26% of smokers talked about the warnings with strangers. Discussions about the health effects of smoking and quitting smoking were more frequent during the first week of exposure to pictorial warnings than in the week prior to beginning the study (both p < 0.05. Pictorial warnings sparked social interactions about the warnings, the health effects of smoking, and quitting smoking, indicating that pictorial warnings may act as a social intervention reaching beyond the individual. Future research should examine social interactions as a potential mediator of the impact of pictorial warnings on smoking behavior.

  5. Tile-Packing Tomography Is NP-hard

    DEFF Research Database (Denmark)

    Chrobak, Marek; Dürr, Christoph; Guíñez, Flavio

    2010-01-01

    Discrete tomography deals with reconstructing finite spatial objects from their projections. The objects we study in this paper are called tilings or tile-packings, and they consist of a number of disjoint copies of a fixed tile, where a tile is defined as a connected set of grid points. A row pr...

  6. The Quality of Equilibria for Set Packing Games

    NARCIS (Netherlands)

    Jong, Jasper de; Uetz, Marc

    2017-01-01

    We introduce set packing games as an abstraction of situations in which $n$ selfish players select subsets of a finite set of indivisible items, and analyze the quality of several equilibria for this class of games. Assuming that players are able to approximately play equilibrium strategies, we show

  7. Diffraction Symmetry in Crystalline, Close-Packed C60

    NARCIS (Netherlands)

    Fleming, R.M.; Siegrist, T.; Marsh, P.M.; Hessen, B.; Kortan, A.R.; Murphy, D.W.; Haddon, R.C.; Tycko, R.; Dabbagh, G.; Mujsce, A.M.; Kaplan, M.L.; Zahurak, S.M.

    1991-01-01

    We have grown crystals of the carbon structure C60 by sublimation. In contrast to solution-grown crystals, the sublimed crystals have long range order with no evidence of solvent inclusions. Sublimed C60 forms three dimensional, faceted crystals with a close-packed, face-centered cubic unit cell. We

  8. Tuning of intermolecular interactions results in packing diversity in ...

    Indian Academy of Sciences (India)

    Crystal structures of four green fluorescent protein (GFP) chromophore analogues with different packing interactions could be tuned by appropriate substitutions around the imidazolin-5-one ring are reported here. Compound 1 was crystallized from tetrahydrofuran at room temperature while compounds 2-4 have been ...

  9. An Experimental Investigation of the Boundary Layer under Pack Ice

    Science.gov (United States)

    1975-01-01

    Layer- Under Pack Ice- 6. PERFORMING ORG. REPORT NUMBER 7. AU.THOR(s) -8. CONTRACT OR GRANT’NUMBER(r) ’ eMiles -G. McPhee N-00014-67-A-0103-0021 .N-00014... nolds number the range of the spectrum in which dissipation occurs is locally Isotropic and depends only on the viscosity, v, and the energy

  10. Cannabis body packing : a case report | Ngatchou | Pan African ...

    African Journals Online (AJOL)

    Cannabis body packing : a case report. ... a diffuse abdominal plain to the emergency department. Abdominal X-ray demonstrated multiple foreign bodies along the intestinal tract, which were found to be cannabis packets. The patient was treated conservatively with a good result. The Pan African Medical Journal 2016;24.

  11. Microbiological Quality of Blister Pack Tablets in Community ...

    African Journals Online (AJOL)

    Purpose: To investigate the microbiological quality of blister-packed tablets manufactured and marketed in Jordan in order to assess Good Manufacturing ... Six of the products with the highest stratified bacterial count were manufactured by one company and were also found to be contaminated with Aeromonas species.

  12. Gas-solid trickle flow hydrodynamics in a packed column

    NARCIS (Netherlands)

    Westerterp, K.R.; Kuczynski, M.

    1987-01-01

    The pressure gradient and the static and the dynamic hold-up have been measured for a system consisting of a Fluid Cracking Catalyst (FCC) of 30–150 × 10−6 m diameter, trickling over a packed bed and with a gas streaming in countercurrent flow. The experiments were carried out at ambient conditions

  13. Technology of mine stone packing in abandoned workings

    Energy Technology Data Exchange (ETDEWEB)

    Neshitin, V.M.; Kurchenko, Eh.P.; Afanas' ev, V.V. (DonUGI (USSR))

    1990-03-01

    Describes technology of stone packing into abandoned workings using a scraper and a slinging machine of belt drum type. Three schemes are presented, one that uses the BS-4P scraper, the 1LP winch and a slinging machine, a second one that uses the UZM slinger with the stone delivered by a conveyor and a third scheme that uses the UZM slinger, 1PPN-5 loader and the OB or BOM tippler. The first and third schemes can be used in two-way workings with cross-section area not less than 9 m{sup 2} and the second scheme in workings with cross-section area not under 6 m{sup 2}. The rate of packing is 168, 236 and 248 m{sup 3}/d respectively. The cost of packing operations is 2.36, 2.82 and 2.46 rubles/t respectively which is 0.99-1.45 less than in the case of hauling and hoisting waste rock to the surface. Organization of packing operations is described.

  14. Packing and Cohesive Properties of Some Locally Extracted Starches

    African Journals Online (AJOL)

    Tapping experiments were used to quantify the packing and cohesive properties of the starches. The volume reduction ability was estimated using the Kawakita equation. Results: The shape factor of the starches provided a proportionality constant between the particle size and surface area. The rank order of the particle ...

  15. Editorial: Authorship: Lone wolf or wolf pack? | Wolvaardt | African ...

    African Journals Online (AJOL)

    African Journal of Health Professions Education. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 2 (2017) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Editorial: Authorship: Lone wolf or wolf pack? J.E. Wolvaardt ...

  16. Rapidly falling costs of battery packs for electric vehicles

    Science.gov (United States)

    Nykvist, Björn; Nilsson, Måns

    2015-04-01

    To properly evaluate the prospects for commercially competitive battery electric vehicles (BEV) one must have accurate information on current and predicted cost of battery packs. The literature reveals that costs are coming down, but with large uncertainties on past, current and future costs of the dominating Li-ion technology. This paper presents an original systematic review, analysing over 80 different estimates reported 2007-2014 to systematically trace the costs of Li-ion battery packs for BEV manufacturers. We show that industry-wide cost estimates declined by approximately 14% annually between 2007 and 2014, from above US$1,000 per kWh to around US$410 per kWh, and that the cost of battery packs used by market-leading BEV manufacturers are even lower, at US$300 per kWh, and has declined by 8% annually. Learning rate, the cost reduction following a cumulative doubling of production, is found to be between 6 and 9%, in line with earlier studies on vehicle battery technology. We reveal that the costs of Li-ion battery packs continue to decline and that the costs among market leaders are much lower than previously reported. This has significant implications for the assumptions used when modelling future energy and transport systems and permits an optimistic outlook for BEVs contributing to low-carbon transport.

  17. Particle shape effects on the stress response of granular packings.

    Science.gov (United States)

    Athanassiadis, Athanasios G; Miskin, Marc Z; Kaplan, Paul; Rodenberg, Nicholas; Lee, Seung Hwan; Merritt, Jason; Brown, Eric; Amend, John; Lipson, Hod; Jaeger, Heinrich M

    2014-01-07

    We present measurements of the stress response of packings formed from a wide range of particle shapes. Besides spheres these include convex shapes such as the Platonic solids, truncated tetrahedra, and triangular bipyramids, as well as more complex, non-convex geometries such as hexapods with various arm lengths, dolos, and tetrahedral frames. All particles were 3D-printed in hard resin. Well-defined initial packing states were established through preconditioning by cyclic loading under given confinement pressure. Starting from such initial states, stress-strain relationships for axial compression were obtained at four different confining pressures for each particle type. While confining pressure has the largest overall effect on the mechanical response, we find that particle shape controls the details of the stress-strain curves and can be used to tune packing stiffness and yielding. By correlating the experimentally measured values for the effective Young's modulus under compression, yield stress and energy loss during cyclic loading, we identify trends among the various shapes that allow for designing a packing's aggregate behavior.

  18. Consumer preferences for front-of-pack calories labelling

    NARCIS (Netherlands)

    Kleef, van E.; Trijp, van J.C.M.; Paeps, F.; Fernández-Celemín, L.

    2008-01-01

    Objective In light of the emerging obesity pandemic, front-of-pack calories labels may be an important tool to assist consumers in making informed healthier food choices. However, there is little prior research to guide key decisions on whether caloric content should be expressed in absolute terms

  19. Packed Bed Reactor Technology for Chemical-Looping Combustion

    NARCIS (Netherlands)

    Noorman, S.; van Sint Annaland, M.; Kuipers, J.A.M.

    2007-01-01

    Chemical-looping combustion (CLC) has emerged as an alternative for conventional power production processes to intrinsically integrate power production and CO2 capture. In this work a new reactor concept for CLC is proposed, based on dynamically operated packed bed reactors. With analytical

  20. Packing states of multilamellar vesicles in a nonionic surfactant system

    DEFF Research Database (Denmark)

    Le, T.D.; Olsson, U.; Mortensen, K.

    2001-01-01

    under shear. Here, we focused only in the MLV region, L-alpha(*), of a temperature sensitive surfactant system (C12E4-water) to investigate the packing of multilamellar vesicles as a function of temperature under constant shear. Two sets of temperature scan experiments were performed in the L...

  1. Optimizing the Heat Dissipation of an Electric Vehicle Battery Pack

    Directory of Open Access Journals (Sweden)

    Hsiu-Ying Hwang

    2015-01-01

    Full Text Available Battery packs are critical components to electric vehicles. They are designed to last for the designed life cycles. Temperature affects the performance and life span of batteries. Maintaining stable and evenly distributed temperatures within the operating temperature range among all modules and battery cells is one of key factors to prolong the life of battery packs. This paper studied the effects of the ventilation locations of the inlets and outlets and the gaps among battery cells on the rate of heat dissipation and temperature distribution in the pack. An existing battery pack was used as a baseline design. A computational fluid dynamics model was created to analyze the temperature distribution and air flow conditions. The design intent is to keep the package changes to the minimum but with better cooling efficiency. The results show that the locations and shapes of inlets and outlets have significant impact on the battery heat dissipation. A design is proposed to minimize the temperature variation among all battery cells. The temperature difference between highest and lowest ones for the evaluated event is reduced from 6.04°C to 3.67°C with 39% improvements, and the heat dissipation rate is improved with 3.8%.

  2. Nutritional Contents of Lunch Packs of Primary School Children in ...

    African Journals Online (AJOL)

    school hours alleviate short term hunger, increase attention span, facilitate learning and obviate the need for children to leave school in search of food.[4] Healthier and better nourished children stay in school longer, learn more and later become healthier and more productive adults. Content of lunch pack should supply a ...

  3. Influence of organic cations on the crystal packing of decavanadate ...

    Indian Academy of Sciences (India)

    Administrator

    Influence of organic cations on the crystal packing of decavanadate containing solids. A RAMANAN, PRASUN ROY, T DURAISAMY, SANJEEV SHARMA and P AYYAPPAN. Department of Chemistry, Indian Institute of Technology, New Delhi. 110 016, India. Polyoxometallates form a rich class of inorganic materials which ...

  4. Tobacco smuggling estimates based on pack examination in Ukraine

    Directory of Open Access Journals (Sweden)

    Tatiana I Andreeva

    2017-05-01

    Cigarette pack examination as a part of tobacco surveillance allows estimating the proportion of cigarettes brought from other countries, part of which could be smuggled. This information can be used for counterbalancing the industry's statements, which usually overestimate the level of cigarette smuggling.

  5. General advancing front packing algorithm for the discrete element method

    Science.gov (United States)

    Morfa, Carlos A. Recarey; Pérez Morales, Irvin Pablo; de Farias, Márcio Muniz; de Navarra, Eugenio Oñate Ibañez; Valera, Roberto Roselló; Casañas, Harold Díaz-Guzmán

    2018-01-01

    A generic formulation of a new method for packing particles is presented. It is based on a constructive advancing front method, and uses Monte Carlo techniques for the generation of particle dimensions. The method can be used to obtain virtual dense packings of particles with several geometrical shapes. It employs continuous, discrete, and empirical statistical distributions in order to generate the dimensions of particles. The packing algorithm is very flexible and allows alternatives for: 1—the direction of the advancing front (inwards or outwards), 2—the selection of the local advancing front, 3—the method for placing a mobile particle in contact with others, and 4—the overlap checks. The algorithm also allows obtaining highly porous media when it is slightly modified. The use of the algorithm to generate real particle packings from grain size distribution curves, in order to carry out engineering applications, is illustrated. Finally, basic applications of the algorithm, which prove its effectiveness in the generation of a large number of particles, are carried out.

  6. Circle packing: experiments in discrete analytic function theory

    OpenAIRE

    Dubejko, Tomasz; Stephenson, Kenneth

    1995-01-01

    Circle packings are configurations of circles with specified patterns of tangency, and lend themselves naturally to computer experimentation and visualization. Maps between them display, with surprising faithfulness, many of the geometric properties associated with classical analytic functions. This paper introduces the fundamentals of an emerging "discrete analytic function theory'' and investigates connections with the classical theory. It then describes several experiment...

  7. Assessing the clogging and permeability of degrading packed bed ...

    African Journals Online (AJOL)

    2018-01-01

    Jan 1, 2018 ... technologies are expensive, the mining sector has an increasing need for passive water treatment technology, with low maintenance and ... low-cost water treatment in South Africa. The degrading packed bed reactor (DPBR) is one of the units comprising the hybrid treatment group. The DPBR's main action ...

  8. Levels Of Haemoglobin And Packed Cell Volumes In Umbilical Cord ...

    African Journals Online (AJOL)

    Blood samples were taken from 121 umbilical cords at time of birth, and were analysed for haemoglobin concentration (Hb) and packed cell volume (PCV). The Hb concentration was determined by the indirect colorimetric method, and the PCV by the microhaematocrit centrifuge method. The mean values obtained were Hb ...

  9. Noncontact ultrasound detection of exotic insects in wood packing materials

    Science.gov (United States)

    Mary R. Fleming; Dinesh K. Agrawal; Mahesh C. Bhardwaj; Leah S. Bauer; John J. Janowiak; Deborah L. Miller; Jeffrey E. Shield; Kelli Hoover; Rustum Roy

    2005-01-01

    Nondestructive methods for detection of wood-boring insects such as the Asian longhorned beetle (ALB), Anoplophora glabripennis (Coleoptera: Cerambycidae) inside solid wood packing materials is a valuable tool in the fight to exclude exotic insects from attacking a nation?s timber resources. Nondestructive, non-contact, ultrasound was investigated as...

  10. Means for sealing hemp packings in gas pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Pistek, P.; Kubat, J.; Novak, L.

    1981-02-15

    The means for sealing hemp packings in gas pipelines has the following composition: 25-35% diethylene glycol, 10-15% glycerin, 10-15% triethylene glycol, 5-15% high ethylene glycols with an average molecular weight of 300, 20-35% the monobutyl ether of triethylene glycol, 4-7% ethoxylated p-chlorophenol, and 5-15% monoethanol amine.

  11. Effect of Plasmodium species infections on packed cell volume of ...

    African Journals Online (AJOL)

    Populations of exotic and indigenous domestic chickens and guinea fowls in northeastern Nigeria were surveyed for Plasmodium sp by examining their stained blood samples. The packed cel volumes of all blood samples were estimated. During the period of study (March to September 2006), raina data were collected.

  12. PISCO GETTING IN A PACKED DISTILLATION COLUMN BATCH

    OpenAIRE

    Otiniano Cáceres, Manuel Eduardo; Departamento de Operaciones Unitarias, FACULTAD DE QUÌMICA E INGENIERÌA QUÌMICA, UNIVERSIDAD NACIONAL MAYOR DE SAN MARCOS.LIMA-PERÚ; Romero, P.; Departamento de Análisis y Diseño de Procesos, Facultad de Química e Ingeniería Química-Universidad Nacional Mayor de San Marcos. Lima-Perú; Vicuña, E.; Departamento de Análisis y Diseño de Procesos, FACULTAD DE QUÌMICA E INGENIERÌA QUÌMICA, UNIVERSIDAD NACIONAL MAYOR DE SAN MARCOS. LIMA-PERÚ; Robles, R.; Departamento de Análisis y Diseño de Procesos, FACULTAD DE QUÌMICA E INGENIERÌA QUÌMICA, UNIVERSIDAD NACIONAL MAYOR DE SAN MARCOS. LIMA-PERÚ; Garrido, A.; Departamento de Operaciones Unitarias, FACULTAD DE QUÌMICA E INGENIERÌA QUÌMICA, UNIVERSIDAD NACIONAL MAYOR DE SAN MARCOS.LIMA-PERÚ; Linares, T.; Departamento de Química Orgánica, FACULTAD DE QUÌMICA E INGENIERÌA QUÌMICA, UNIVERSIDAD NACIONAL MAYOR DE SAN MARCOS.LIMA-PERÚ

    2014-01-01

    We present the results of experimental runs performed far obtaining pisco in batch distillation column packed stainless steel from fermented wine of grape Quebranta. Se presentan los resultados de las corridas experimentales realizadas para la obtención de pisco en la columna de desülación disconlirua empacada de acero inoxidable a partir de vino fermentado de uva Quebranta.

  13. Influence of different packing methods on the hydrodynamic stability of chromatography columns.

    Science.gov (United States)

    Dorn, M; Eschbach, F; Hekmat, D; Weuster-Botz, D

    2017-09-22

    It is well known that packing non-uniformity may cause peak asymmetry and limit the performance of packed-bed chromatographic columns. However, understanding of the reasons leading to packing non-uniformity is still limited. Therefore, the effect of different column packing methods, i.e. dynamic axial compression (DAC), flow packing, and combinations of both on the hydrodynamic packing heterogeneity and stability of packings composed of polymer-based compressible porous resins with a mean diameter of 90μm was investigated experimentally as well as in-silico. Deterministic Euler-Lagrange modeling of a small chromatographic column with a diameter of 9.6mm and a bed height of 30mm was applied by coupling Computational Fluid Dynamics (CFD) and the Discrete Element Method (DEM). Interparticle micromechanics as well as the fluid-particle and particle-wall interactions were taken into account. Experiments and simulations revealed substantial non-uniformity of compression force transmission and axial packing density distribution during both dynamic axial compression and flow packing which was related to wall support and interparticle friction. By combining both packing methods sequentially (dynamic axial compression followed by flow packing or vice versa), the compression forces were more homogeneous resulting in improved packing procedures. Repeated alternating application of flow packing and DAC (the so-called hybrid packing method) resulted in the most homogeneous packing density distribution and the highest packing stability which was kept nearly constant during long-term operation with cyclic hydrodynamic load. The hydrodynamic stability of the chromatographic column was evaluated by calculating the integral porosity deviation and packing induced flow velocity dispersion. The hybrid packing method gave the best results for both parameters. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. From Safe Systems to Patient Safety

    DEFF Research Database (Denmark)

    Aarts, J.; Nøhr, C.

    2010-01-01

    for the third conference with the theme: The ability to design, implement and evaluate safe, useable and effective systems within complex health care organizations. The theme for this conference was "Designing and Implementing Health IT: from safe systems to patient safety". The contributions have reflected...... and implementation of safe systems and thus contribute to the agenda of patient safety? The contributions demonstrate how the health informatics community has contributed to the performance of significant research and to translating research findings to develop health care delivery and improve patient safety...

  15. The sensitivity of a military-based occupational fitness test of muscular strength.

    Science.gov (United States)

    Middleton, Kane J; Carstairs, Greg L; Caldwell, Joanne N; Billing, Daniel C; Beck, Ben

    2017-04-01

    The risk of low back pain and injury during manual materials handling is increased if personnel are not physically capable of safely performing such tasks. To establish predictive relationships and develop a test cut-score, 69 participants performed a critical military lifting task to a 1.5-m platform (pack lift) and two task-related predictive tests (box lift to 1.5 m and 1.3 m). The pack lift was strongly correlated with both the 1.5-m (R2 = 0.85) and 1.3-m box lifts (R2 = 0.82). Both tests had similar sensitivity (range 0.85-0.94) with the 1.3-m test having higher specificity when compared with the 1.5-m lift. Increasing the test cut-score with the application of a safety factor increased the number of false positives and true negatives for both tests. Organisations must carefully assess their risk acceptance when applying safety factors to test cut-scores as the classification (pass/fail) of personnel may be affected. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Explosion Testing of a Polycarbonate Safe Haven Wall

    National Research Council Canada - National Science Library

    Kyle A. Perry; Rex A. Meyr

    2016-01-01

    ...) blast loading spanning 200 milliseconds. The successful design was constructed at a uniform height in both half-width scale and quarter-width scale in the University of Kentucky Explosives Research Team’s (UKERT...

  17. Consumer preferences for front-of-pack calories labelling.

    Science.gov (United States)

    van Kleef, Ellen; van Trijp, Hans; Paeps, Frederic; Fernández-Celemín, Laura

    2008-02-01

    In light of the emerging obesity pandemic, front-of-pack calories labels may be an important tool to assist consumers in making informed healthier food choices. However, there is little prior research to guide key decisions on whether caloric content should be expressed in absolute terms or relative to recommended daily intake, whether it should be expressed in per serving or per 100 g and whether the information should be further brought alive for consumers in terms of what the extra calorie intake implies in relation to activity levels. The present study aimed at providing more insight into consumers' appreciation of front-of-pack labelling of caloric content of food products and their specific preferences for alternative execution formats for such information in Europe. For this purpose, eight executions of front-of-pack calorie flags were designed and their appeal and information value were extensively discussed with consumers through qualitative research in four different countries (Germany, The Netherlands, France and the UK). The results show that calories are well-understood and that participants were generally positive about front-of-pack flags, particularly when flags are uniform across products. The most liked flags are the simpler flags depicting only the number of calories per serving or per 100 g, while more complex flags including references to daily needs or exercise and the flag including a phrase referring to balanced lifestyle were least preferred. Some relevant differences between countries were observed. Although participants seem to be familiar with the notion of calories, they do not seem to fully understand how to apply them. From the results, managerial implications for the design and implementation of front-of-pack calorie labelling as well as important directions for future research are discussed.

  18. Consumer preferences for front-of-pack calories labelling

    Science.gov (United States)

    van Kleef, Ellen; van Trijp, Hans; Paeps, Frederic; Fernández-Celemín, Laura

    2008-01-01

    Objective In light of the emerging obesity pandemic, front-of-pack calories labels may be an important tool to assist consumers in making informed healthier food choices. However, there is little prior research to guide key decisions on whether caloric content should be expressed in absolute terms or relative to recommended daily intake, whether it should be expressed in per serving or per 100 g and whether the information should be further brought alive for consumers in terms of what the extra calorie intake implies in relation to activity levels. The present study aimed at providing more insight into consumers’ appreciation of front-of-pack labelling of caloric content of food products and their specific preferences for alternative execution formats for such information in Europe. Design For this purpose, eight executions of front-of-pack calorie flags were designed and their appeal and information value were extensively discussed with consumers through qualitative research in four different countries (Germany, The Netherlands, France and the UK). Results The results show that calories are well-understood and that participants were generally positive about front-of-pack flags, particularly when flags are uniform across products. The most liked flags are the simpler flags depicting only the number of calories per serving or per 100 g, while more complex flags including references to daily needs or exercise and the flag including a phrase referring to balanced lifestyle were least preferred. Some relevant differences between countries were observed. Although participants seem to be familiar with the notion of calories, they do not seem to fully understand how to apply them. Conclusion From the results, managerial implications for the design and implementation of front-of-pack calorie labelling as well as important directions for future research are discussed. PMID:17601362

  19. Singlet Fission in Rubrene Derivatives: Impact of Molecular Packing

    KAUST Repository

    Sutton, Christopher

    2017-03-13

    We examine the properties of six recently synthesized rubrene derivatives (with substitutions on the side phenyl rings) that show vastly different crystal structures. In order to understand how packing in the solid state affects the excited states and couplings relevant for singlet fission, the lowest excited singlet (S), triplet (T), multiexciton (TT), and charge-transfer (CT) states of the rubrene derivatives are compared to known singlet fission materials [tetracene, pentacene, 5,12-diphenyltetracene (DPT), and rubrene itself]. While a small difference of less than 0.2 eV is calculated for the S and TT energies, a range of 0.50 to 1.2 eV in the CT energies and nearly 3 orders of magnitude in the electronic couplings are computed for the rubrene derivatives in their crystalline packings, which strongly affects the role of the CT state in facilitating SF. To rationalize experimental observations of singlet fission occurring in amorphous phases of rubrene, DPT, and tetracene, we use molecular dynamics (MD) simulations to assess the impact of molecular packing and orientations and to gain a better understanding of the parameters that control singlet fission in amorphous films compared to crystalline packings. The MD simulations point to a crystalline-like packing for thin films of tetracene; on the other hand, DPT, rubrene, and the rubrene derivatives all show various degrees of disorder with a number of sites that have larger electronic couplings than in the crystal, which can facilitate singlet fission in such thin films. Our analysis underlines the potential of these materials as promising candidates for singlet fission and helps understand how various structural motifs affect the critical parameters that control the ability of a system to undergo singlet fission.

  20. A ‘Simple Anterior Fish Excluder’ (SAFE) for Mitigating Penaeid-Trawl Bycatch

    Science.gov (United States)

    McHugh, Matthew J.; Broadhurst, Matt K.; Sterling, David J.; Millar, Russell B.

    2015-01-01

    Various plastic strips and sheets (termed ‘simple anterior fish excluders’−SAFEs) were positioned across the openings of penaeid trawls in attempts at reducing the unwanted bycatches of small teleosts. Initially, three SAFEs (a single wire without, and with small and large plastic panels) were compared against a control (no SAFE) on paired beam trawls. All SAFEs maintained targeted Metapenaeus macleayi catches, while the largest plastic SAFE significantly reduced total bycatch by 51% and the numbers of Pomatomus saltatrix, Mugil cephalus and Herklotsichthys castelnaui by up to 58%. A redesigned SAFE (‘continuous plastic’) was subsequently tested (against a control) on paired otter trawls, significantly reducing total bycatch by 28% and P. saltatrix and H. castelnaui by up to 42%. The continuous-plastic SAFE also significantly reduced M. macleayi catches by ~7%, but this was explained by ~5% less wing-end spread, and could be simply negated through otter-board refinement. Further work is required to refine the tested SAFEs, and to quantify species-specific escape mechanisms. Nevertheless, the SAFE concept might represent an effective approach for improving penaeid-trawl selectivity. PMID:25837892

  1. Effects of educational intervention among reproductive age group women on safe abortion.

    Science.gov (United States)

    Silwal, Kalpana; Shrestha, Tumla; Dulal, Ram Krishna

    2013-01-01

    Many reproductive aged women needlessly die due to unsafe abortion even when they seek help to terminate their unwanted pregnancy. These deaths could have been prevented had they been aware that safe abortion service was available to them. The study aimed at finding out the effectiveness of the education intervention in improving knowledge among reproductive age group women regarding the safe abortion. An experimental intervention was carried out on safe abortion education among the reproductive age group women. The impact of pre- and post- intervention was evaluated by using a set of structured questionnaire in local language. The obtained data was analyzed by using the Excel and Statistical Package for the Social Sciences, version 12.0 for windows and result was interpreted. The post intervention finding revealed a significantly higher (p=0.001) mean on knowledge among participants about safe abortion compared to pre-observational test. The mean difference between the pre-test and post-test was 64.1% (Pre-test 11.18±12.88 Post-test 75.28±9.56). The research hypothesis was accepted with p value paired t-test at effective in increasing safe abortion awareness among reproductive aged group women. The safe abortion educational intervention program was instrumental to improve reproductive age women's knowledge considerably about safe abortion service.

  2. Think Before You Ink: Are Tattoos Safe?

    Science.gov (United States)

    ... Consumers Consumer Updates Think Before You Ink: Are Tattoos Safe? Share Tweet Linkedin Pin it More sharing ... I be concerned about unsafe practices, or the tattoo ink itself? Both. While you can get serious ...

  3. How to Safely Use Nail Care Products

    Science.gov (United States)

    ... Products For Consumers Home For Consumers Consumer Updates How to Safely Use Nail Care Products Share Tweet Linkedin ... more than 10 minutes per hand, per session. How to Report Problems with Nail Care Products If you ...

  4. When Is an Opioid Safe to Take?

    Science.gov (United States)

    ... gov/news/fullstory_166872.html When Is an Opioid Safe to Take? Doctors say it can treat ... Society of Anesthesiologists (ASA): Why was I prescribed opioids? Did the doctor assume opioids are the strongest ...

  5. AFSC/REFM: Groundfish SAFE Economic Report

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Groundfish SAFE Economic Report, published annually as a supplement to the Stock Assessment and Fishery Evaluation Reports for Bering Sea and Aleutian Islands...

  6. Implicit attitudes towards risky and safe driving

    DEFF Research Database (Denmark)

    Martinussen, Laila Marianne; Sømhovd, Mikael Julius; Møller, Mette

    ; further, self-reports of the intention to drive safely (or not) are socially sensitive. Therefore, we examined automatic preferences towards safe and risky driving with a Go/No-go Association Task (GNAT). The results suggest that (1) implicit attitudes towards driving behavior can be measured reliably...... with the GNAT; (2) implicit attitudes towards safe driving versus towards risky driving may be separable constructs. We propose that research on driving behavior may benefit from routinely including measures of implicit cognition. A practical advantage is a lesser susceptibility to social desirability biases......, compared to self-report methods. Pending replication in future research, the apparent dissociation between implicit attitudes towards safe versus risky driving that we observed may contribute to a greater theoretical understanding of the causes of unsafe and risky driving behavior....

  7. Aspirin during Pregnancy: Is It Safe?

    Science.gov (United States)

    Healthy Lifestyle Pregnancy week by week Is it safe to take aspirin during pregnancy? Answers from Yvonne Butler Tobah, M. ... 2015 Original article: http://www.mayoclinic.org/healthy-lifestyle/pregnancy-week-by-week/expert-answers/aspirin-during-pregnancy/ ...

  8. Pregnancy and Fish: What's Safe to Eat?

    Science.gov (United States)

    Healthy Lifestyle Pregnancy week by week If you're unsure about whether it's safe to eat seafood during your pregnancy, ... 2016 Original article: http://www.mayoclinic.org/healthy-lifestyle/pregnancy-week-by-week/in-depth/pregnancy-and-fish/ ...

  9. Pregnancy Constipation: Are Stool Softeners Safe?

    Science.gov (United States)

    Healthy Lifestyle Pregnancy week by week Is it safe to take stool softeners to treat pregnancy constipation? Answers from Yvonne ... 2017 Original article: http://www.mayoclinic.org/healthy-lifestyle/pregnancy-week-by-week/expert-answers/pregnancy-constipation/faq- ...

  10. Thermochemical ablation therapy of VX2 tumor using a permeable oil-packed liquid alkali metal.

    Directory of Open Access Journals (Sweden)

    Ziyi Guo

    Full Text Available Alkali metal appears to be a promising tool in thermochemical ablation, but, it requires additional data on safety is required. The objective of this study was to explore the effectiveness of permeable oil-packed liquid alkali metal in the thermochemical ablation of tumors.Permeable oil-packed sodium-potassium (NaK was prepared using ultrasonic mixing of different ratios of metal to oil. The thermal effect of the mixture during ablation of muscle tissue ex vivo was evaluated using the Fluke Ti400 Thermal Imager. The thermochemical effect of the NaK-oil mixture on VX2 tumors was evaluated by performing perfusion CT scans both before and after treatment in 10 VX2 rabbit model tumors. VX2 tumors were harvested from two rabbits immediately after treatment to assess their viability using trypan blue and hematoxylin and eosin (H.E. staining.The injection of the NaK-oil mixture resulted in significantly higher heat in the ablation areas. The permeable oil controlled the rate of heat released during the NaK reaction with water in the living tissue. Perfusion computed tomography and its parameter map confirmed that the NaK-oil mixture had curative effects on VX2 tumors. Both trypan blue and H.E. staining showed partial necrosis of the VX2 tumors.The NaK-oil mixture may be used successfully to ablate tumor tissue in vivo. With reference to the controlled thermal and chemical lethal injury to tumors, using a liquid alkali in ablation is potentially an effective and safe method to treat malignant tumors.

  11. Online Learning of Safe Patient Transfers in Occupational Therapy Education

    Directory of Open Access Journals (Sweden)

    Cynthia L. Hayden D. H. Ed., OTR/L, CHT

    2013-02-01

    Full Text Available Online higher education is steadily increasing. For programs in allied health to be offered effectively in an elearning format, clinical psychomotor skills need to be addressed. The aim of this research was to design, implement, and evaluate an online safe patient transfers module for occupational therapy assistant (OTAstudents. The efficacy of teaching safe patient transfers in an e-learning environment was appraised using both quantitative and qualitative analysis. The applied research project was completed at a Tennessee community college. A convenience sample of eighteen students participated in the pilot study. Twenty-five studentsparticipated in the subsequent study. The instructional design of the course was based on Mager’s CriterionReferenced Instruction model. Streaming video was used as the delivery method for course material. A pretest/posttest evaluated the students’ cognitive knowledge of safe patient transfers. A behavioral transferscompetency checklist was used to rate videotapes of students’ performance of assisted stand pivot and dependent sliding board transfers. Research findings indicated students were able to learn this psychomotor clinical skill online with beginning proficiency. A paired t-test showed marked improvement of cognitive knowledge. A student learning survey revealed the majority of students preferred at least one hands-on classroom session where instructor feedback and interaction with classmates confirmed safe and effectiveclinical technique.

  12. Managing Cassini Safe Mode Attitude at Saturn

    Science.gov (United States)

    Burk, Thomas A.

    2010-01-01

    The Cassini spacecraft was launched on October 15, 1997 and arrived at Saturn on June 30, 2004. It has performed detailed observations and remote sensing of Saturn, its rings, and its satellites since that time. In the event safe mode interrupts normal orbital operations, Cassini has flight software fault protection algorithms to detect, isolate, and recover to a thermally safe and commandable attitude and then wait for further instructions from the ground. But the Saturn environment is complex, and safety hazards change depending on where Cassini is in its orbital trajectory around Saturn. Selecting an appropriate safe mode attitude that insures safe operation in the Saturn environment, including keeping the star tracker field of view clear of bright bodies, while maintaining a quiescent, commandable attitude, is a significant challenge. This paper discusses the Cassini safe table management strategy and the key criteria that must be considered, especially during low altitude flybys of Titan, in deciding what spacecraft attitude should be used in the event of safe mode.

  13. Curiosity's Autonomous Surface Safing Behavior Design

    Science.gov (United States)

    Neilson, Tracy A.; Manning, Robert M.

    2013-01-01

    The safing routines on all robotic deep-space vehicles are designed to put the vehicle in a power and thermally safe configuration, enabling communication with the mission operators on Earth. Achieving this goal is made a little more difficult on Curiosity because the power requirements for the core avionics and the telecommunication equipment exceed the capability of the single power source, the Multi-Mission Radioisotope Thermoelectric Generator. This drove the system design to create an operational mode, called "sleep mode", where the vehicle turns off most of the loads in order to charge the two Li-ion batteries. The system must keep the vehicle safe from over-heat and under-heat conditions, battery cell failures, under-voltage conditions, and clock failures, both while the computer is running and while the system is sleeping. The other goal of a safing routine is to communicate. On most spacecraft, this simply involves turning on the receiver and transmitter continuously. For Curiosity, Earth is above the horizon only a part of the day for direct communication to the Earth, and the orbiter overpass opportunities only occur a few times a day. The design must robustly place the Rover in a communicable condition at the correct time. This paper discusses Curiosity's autonomous safing behavior and describes how the vehicle remains power and thermally safe while sleeping, as well as a description of how the Rover communicates with the orbiters and Earth at specific times.

  14. Enhanced desalination performance of membrane capacitive deionization cells by packing the flow chamber with granular activated carbon.

    Science.gov (United States)

    Bian, Yanhong; Yang, Xufei; Liang, Peng; Jiang, Yong; Zhang, Changyong; Huang, Xia

    2015-11-15

    A new design of membrane capacitive deionization (MCDI) cell was constructed by packing the cell's flow chamber with granular activated carbon (GAC). The GAC packed-MCDI (GAC-MCDI) delivered higher (1.2-2.5 times) desalination rates than the regular MCDI at all test NaCl concentrations (∼ 100-1000 mg/L). The greatest performance enhancement by packed GAC was observed when treating saline water with an initial NaCl concentration of 100 mg/L. Several different GAC materials were tested and they all exhibited similar enhancement effects. Comparatively, packing the MCDI's flow chamber with glass beads (GB; non-conductive) and graphite granules (GG; conductive but with lower specific surface area than GAC) resulted in inferior desalination performance. Electrochemical impedance spectroscopy (EIS) analysis showed that the GAC-MCDI had considerably smaller internal resistance than the regular MCDI (∼ 19.2 ± 1.2 Ω versus ∼ 1222 ± 15 Ω at 100 mg/L NaCl). The packed GAC also decreased the ionic resistance across the flow chamber (∼ 1.49 ± 0.05 Ω versus ∼ 1130 ± 12 Ω at 100 mg/L NaCl). The electric double layer (EDL) formed on the GAC surface was considered to store salt ions during electrosorption, and facilitate the ion transport in the flow chamber because of the higher ion conductivity in the EDLs than in the bulk solution, thereby enhancing the MCDI's desalination rate. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Coliform bacteria in Sierra Nevada wilderness lakes and streams: what is the impact of backpackers, pack animals, and cattle?

    Science.gov (United States)

    Derlet, Robert W; Carlson, James R

    2006-01-01

    The presence of coliform bacteria indicates a watershed risk for harboring microbes capable of causing human disease. We hypothesized that water from watersheds that have different human- or animal-use patterns would have differing risks for the presence of coliform bacteria. METHODS; Water was collected in wilderness areas of the Sierra Nevada range in California. A total of 60 sites from lakes or streams were selected to statistically differentiate the risk categories: 1) high use by backpackers, 2) high use by pack animals, 3) cattle- and sheep-grazing tracts, and 4) natural areas rarely visited by humans or domestic animals. Water was collected in sterile test tubes and Millipore coliform samplers during the summer of 2004. Water was analyzed at the university microbiology lab, where bacteria were harvested and then subjected to analysis by standardized techniques. Confirmation was performed with a Phoenix 100 bacteria analyzer. Statistical analysis to compare site categories was performed with Fisher exact test. Only 1 of 15 backpacker sites yielded coliforms. In contrast, 12 of 15 sites with heavy pack-animal traffic yielded coliforms. All 15 sites below the cattle-grazing areas grew coliforms. Differences between backpacker and cattle or pack-animal areas were significant (P coliforms. All coliforms were identified as Escherichia coli. All samples grew normal aquatic bacteria of the genera Pseudomonas, Ralstonia, and Serratia and nonpathogenic strains of Yersinia. No correlation could be made with temperature or elevation. Sites below cattle-grazing tracts and pack-animal usage areas tended to have more total bacteria. Alpine wilderness water below cattle-grazing tracts or areas used by pack animals are at risk for containing coliform organisms. Areas exclusively used by backpackers were nearly free of coliforms.

  16. Fluid model for a partially packed dielectric barrier discharge plasma reactor

    Science.gov (United States)

    Gadkari, Siddharth; Tu, Xin; Gu, Sai

    2017-09-01

    In this work, a two-dimensional numerical fluid model is developed for a partially packed dielectric barrier discharge (DBD) in pure helium. Influence of packing on the discharge characteristics is studied by comparing the results of DBD with partial packing with those obtained for DBD with no packing. In the axial partial packing configuration studied in this work, the electric field strength was shown to be enhanced at the top surface of the spherical packing material and at the contact points between the packing and the dielectric layer. For each value of applied potential, DBD with partial packing showed an increase in the number of pulses in the current profile in the positive half cycle of the applied voltage, as compared to DBD with no packing. Addition of partial packing to the plasma-alone DBD also led to an increase in the electron and ion number densities at the moment of breakdown. The time averaged electron energy profiles showed that a much higher range of electron energy can be achieved with the use of partial packing as compared to no packing in a DBD, at the same applied power. The spatially and time averaged values over one voltage cycle also showed an increase in power density and electron energy on inclusion of partial packing in the DBD. For the applied voltage parameters studied in this work, the discharge was found to be consistently homogeneous and showed the characteristics of atmospheric pressure glow discharge.

  17. New Electro-Thermal Battery Pack Model of an Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Muhammed Alhanouti

    2016-07-01

    Full Text Available Since the evolution of the electric and hybrid vehicle, the analysis of batteries’ characteristics and influence on driving range has become essential. This fact advocates the necessity of accurate simulation modeling for batteries. Different models for the Li-ion battery cell are reviewed in this paper and a group of the highly dynamic models is selected for comparison. A new open circuit voltage (OCV model is proposed. The new model can simulate the OCV curves of lithium iron magnesium phosphate (LiFeMgPO4 battery type at different temperatures. It also considers both charging and discharging cases. The most remarkable features from different models, in addition to the proposed OCV model, are integrated in a single hybrid electrical model. A lumped thermal model is implemented to simulate the temperature development in the battery cell. The synthesized electro-thermal battery cell model is extended to model a battery pack of an actual electric vehicle. Experimental tests on the battery, as well as drive tests on the vehicle are performed. The proposed model demonstrates a higher modeling accuracy, for the battery pack voltage, than the constituent models under extreme maneuver drive tests.

  18. Can front-of-pack labelling schemes guide healthier food choices? Australian shoppers' responses to seven labelling formats.

    Science.gov (United States)

    Watson, Wendy L; Kelly, Bridget; Hector, Debra; Hughes, Clare; King, Lesley; Crawford, Jennifer; Sergeant, John; Chapman, Kathy

    2014-01-01

    There is evidence that easily accessible, comprehensible and consistent nutrient information on the front of packaged foods could assist shoppers to make healthier food choices. This study used an online questionnaire of 4357 grocery shoppers to examine Australian shoppers' ability to use a range of front-of-pack labels to identify healthier food products. Seven different front-of-pack labelling schemes comprising variants of the Traffic Light labelling scheme and the Percentage Daily Intake scheme, and a star rating scheme, were applied to nine pairs of commonly purchased food products. Participants could also access a nutrition information panel for each product. Participants were able to identify the healthier product in each comparison over 80% of the time using any of the five schemes that provided information on multiple nutrients. No individual scheme performed significantly better in terms of shoppers' ability to determine the healthier product, shopper reliance on the 'back-of-pack' nutrition information panel, and speed of use. The scheme that provided information about energy only and a scheme with limited numerical information of nutrient type or content performed poorly, as did the nutrition information panel alone (control). Further consumer testing is necessary to determine the optimal format and content of an interpretive front-of-pack nutrition labelling scheme. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Critical points and magnitude of impacts on the packing line: effect on ripening and quality of 'Packham's Triumph' pears

    Directory of Open Access Journals (Sweden)

    Josiane Pasini

    2017-06-01

    Full Text Available Pears have a very sensitive epidermis and are prone to signal mechanical blemishes, which result in reduced visual quality and low consumer acceptance. The objective of this work was to identify critical points and the magnitude of impact forces on a packing line at a commercial packinghouse. The effect of injuries on ripening and quality of ´Packham´s Triumph´ pears was also evaluated after cold storage. The packing line was scrutinized on its transfer points, fruit drop heights and cushioning overlays, which allowed to acquire the maximum accelerations on each spot. The maximum acceleration forces were reproduced in the lab with ‘Packham’s Triumph’ pears to evaluate the effects on fruit quality after cold storage. Four critical points were noticed on the packing line: at the transfer from the conveyor belt to the lifting rollers, at the transfer from the lifting rollers to the washing ramp with rotatory brushes, at the entrance to the singulator at the end of the conveyor belt and at the drop from the sizer to the packing stalls. Ripening of ‘Packham’s Triumph’ pears invariably came about during cold storage, and independently of the imposed impacts. The impacts under the circumstances of the test did not affect the quality of ´Packham´s Triumph´ pears kept for up to 120 days at cold storage followed by five days at room temperature.

  20. Safe haven laws as crime control theater.

    Science.gov (United States)

    Hammond, Michelle; Miller, Monica K; Griffin, Timothy

    2010-07-01

    This article examines safe haven laws, which allow parents to legally abandon their infants. The main objective is to determine whether safe haven laws fit the criteria of crime control theater, a term used to describe public policies that produce the appearance, but not the effect, of crime control, and as such are essentially socially constructed "solutions" to socially constructed crime "problems." The analysis will apply the principles of crime control theater to safe haven laws. Specifically, the term crime control theater applies to laws that are reactionary responses to perceived criminal threats and are often widely supported as a way to address the crime in question. Such laws are attractive because they appeal to mythic narratives (i.e., saving an innocent child from a predator); however they are likely ineffective due to the complexity of the crime. These laws can have deleterious effects when policymakers make false claims of success and stunt public discourse (e.g., drawing attention away from more frequent and preventable crimes). This analysis applies these criteria to safe haven laws to determine whether such laws can be classified as crime control theater. Many qualities inherent to crime control theater are present in safe haven laws. For example, the laws are highly publicized, their intentions lack moral ambiguity, rare cases of success legitimize law enforcement and other agencies, and they appeal to the public sense of responsibility in preventing crime. Yet the goal of saving infant lives may be unattainable. These qualities make the effectiveness of the laws questionable and suggest they may be counterproductive. This analysis determined that safe haven laws are socially constructed solutions to the socially constructed problem of child abandonment. Safe haven laws are appropriately classified as crime control theater. It is imperative that further research be conducted to examine the effectiveness and collateral effects of safe haven laws

  1. Do Leadership Style, Unit Climate, and Safety Climate Contribute to Safe Medication Practices?

    Science.gov (United States)

    Farag, Amany; Tullai-McGuinness, Susan; Anthony, Mary K; Burant, Christopher

    2017-01-01

    This study aims at: examining if leadership style and unit climate predict safety climate; and testing the direct, indirect, and total effect of leadership style, unit climate, and safety climate on nurses' safe medication practices. The Institute of Medicine and nursing scholars propose that safety climate is a prerequisite to safety practices. However, there is limited empirical evidence about factors contributing to the development of safety climate and about the association with nurses' safe medication practices. This cross-sectional study used survey data from 246 RNs working in a Magnet® hospital. Leadership style and unit climate predicted 20% to 50% of variance on all safety climate dimensions. Model testing revealed the indirect impact of leadership style and unit climate on nurses' safe medication practices. Our hypothesized model explained small amount of the variance on nurses' safe medication practices. This finding suggests that nurses' safe medication practices are influenced by multiple contextual and personal factors that should be further examined.

  2. Safe Detection System for Hydrogen Leaks

    Energy Technology Data Exchange (ETDEWEB)

    Lieberman, Robert A. [Intelligent Optical Systems, Inc., Torrance, CA (United States); Beshay, Manal [Intelligent Optical Systems, Inc., Torrance, CA (United States)

    2012-02-29

    Hydrogen is an "environmentally friendly" fuel for future transportation and other applications, since it produces only pure ("distilled") water when it is consumed. Thus, hydrogen-powered vehicles are beginning to proliferate, with the total number of such vehicles expected to rise to nearly 100,000 within the next few years. However, hydrogen is also an odorless, colorless, highly flammable gas. Because of this, there is an important need for hydrogen safety monitors that can warn of hazardous conditions in vehicles, storage facilities, and hydrogen production plants. To address this need, IOS has developed a unique intrinsically safe optical hydrogen sensing technology, and has embodied it in detector systems specifically developed for safety applications. The challenge of using light to detect a colorless substance was met by creating chemically-sensitized optical materials whose color changes in the presence of hydrogen. This reversible reaction provides a sensitive, reliable, way of detecting hydrogen and measuring its concentration using light from low-cost LEDs. Hydrogen sensors based on this material were developed in three completely different optical formats: point sensors ("optrodes"), integrated optic sensors ("optical chips"), and optical fibers ("distributed sensors") whose entire length responds to hydrogen. After comparing performance, cost, time-to-market, and relative market need for these sensor types, the project focused on designing a compact optrode-based single-point hydrogen safety monitor. The project ended with the fabrication of fifteen prototype units, and the selection of two specific markets: fuel cell enclosure monitoring, and refueling/storage safety. Final testing and development of control software for these markets await future support.

  3. Fuel Cell Shaft Power Pack - Regulering af brændselsceller

    DEFF Research Database (Denmark)

    Andreasen, Søren Juhl

    2009-01-01

    Afsluttende formidling af forskningsresultater i forbindelse med projektet Fuel Cell Shaft Power Pack......Afsluttende formidling af forskningsresultater i forbindelse med projektet Fuel Cell Shaft Power Pack...

  4. Insulation Resistance Monitoring Algorithm for Battery Pack in Electric Vehicle Based on Extended Kalman Filtering

    National Research Council Canada - National Science Library

    Chuanxue Song; Yulong Shao; Shixin Song; Silun Peng; Fang Zhou; Cheng Chang; Da Wang

    2017-01-01

    To improve the accuracy of insulation monitoring between the battery pack and chassis of electric vehicles, we established a serial battery pack model composed of first-order resistor-capacitor (RC...

  5. 7 CFR 989.702 - Minimum grade standards for packed raisins.

    Science.gov (United States)

    2010-01-01

    ... for those factors. (b) Golden Seedless Raisins. Packed Golden Seedless raisins shall at least meet the... Currant Raisins. Packed Zante Currant raisins shall at least meet the requirements of U.S. Grade B as...

  6. Simulator for a packing and weighing system of granulated powders.

    Science.gov (United States)

    Couto Rodrigues de Oliveira, Rafael; Garcia, Claudio

    2013-09-01

    The development of a simulator for a packing and weighing system (PWS) of granulated powder is described. It employed system identification to obtain the deterministic part of the model and stochastic processes to reproduce disturbances. It reproduces the fluctuations in carton weight observed in real packing systems. Its final use is to evaluate proposed improvements in the PWS, aiming at reducing overweight and underweight. Its performance is satisfactory, as the oscillations observed in the carton weights, due to powder density variability, are close to reality as well as the monetary losses due to overweight and underweight and the power spectral density graphs of the real and simulated weights. Copyright © 2013 ISA. Published by Elsevier Ltd. All rights reserved.

  7. Use of Computational Fluid Dynamics for Absorption Packed Column Design

    Directory of Open Access Journals (Sweden)

    Haroun Yacine

    2016-05-01

    Full Text Available Computational Fluid Dynamics (CFD is today commonly used in a wide variety of process industries and disciplines for the development of innovative technologies. The present article aims to show how CFD can be used as an effective analysis and design tool for the development and design of packed gas/liquid absorption columns. It is first shown how CFD can be used for the characterisation of packings. The different hydrodynamic and mass transfer design parameters are investigated and adapted CFD methods are suggested. Secondly, column distribution internal development is discussed to show how CFD simulations should be performed to improve the design of gas and liquid distributors. An example of the development of new distribution technologies for floating installation of a reactive absorption column is also presented.

  8. Packing Different Cuboids with Rotations and Spheres into a Cuboid

    Directory of Open Access Journals (Sweden)

    Y. G. Stoyan

    2014-01-01

    Full Text Available The paper considers a packing optimization problem of different spheres and cuboids into a cuboid of the minimal height. Translations and continuous rotations of cuboids are allowed. In the paper, we offer a way of construction of special functions (Φ-functions describing how rotations can be dealt with. These functions permit us to construct the mathematical model of the problem as a classical mathematical programming problem. Basic characteristics of the mathematical model are investigated. When solving the problem, the characteristics allow us to apply a number of original and state-of-the-art efficient methods of local and global optimization. Numerical examples of packing from 20 to 300 geometric objects are given.

  9. An unusual case of predation: dog pack or cougar attack?

    Science.gov (United States)

    Fonseca, Gabriel M; Palacios, Rocío

    2013-01-01

    Injuries produced by animals are capable of leaving severe patterns and in some cases may result in the death of the attacked individual. Law enforcement authorities may come to erroneous conclusions about the source of the bites based on their awareness of animals present and similarities of the injuries to the untrained eye, with dreadful consequences. Expertise of a carnivore biologist and an odontologist that indentifies the particularities of bite marks may be useful for identifying the attacking species. We present the investigation of a fatal dog pack attack involving a 43-year-old man in Bell Ville (Argentina) where the evidence provided by a forensic dentist and a biologist was categorical for establishing the animal species involved. Because of the unusual characteristics of the wounds and the initial hypothesis made by local authorities of a cougar attack, habits and specific patterns of both dog pack and cougar predation on humans are discussed. © 2012 American Academy of Forensic Sciences.

  10. Mobility of icy sand packs, with application to Martian permafrost

    Science.gov (United States)

    Durham, W.B.; Pathare, A.V.; Stern, L.A.; Lenferink, H.J.

    2009-01-01

    [1] The physical state of water on Mars has fundamental ramifications for both climatology and astrobiology. The widespread presence of "softened" Martian landforms (such as impact craters) can be attributed to viscous creep of subsurface ground ice. We present laboratory experiments designed to determine the minimum amount of ice necessary to mobilize topography within Martian permafrost. Our results show that the jammed-to-mobile transition of icy sand packs neither occurs at fixed ice content nor is dependent on temperature or stress, but instead correlates strongly with the maximum dry packing density of the sand component. Viscosity also changes rapidly near the mobility transition. The results suggest a potentially lower minimum volatile inventory for the impact-pulverized megaregolith of Mars. Furthermore, the long-term preservation of partially relaxed craters implies that the ice content of Martian permafrost has remained close to that at the mobility transition throughout Martian history. Copyright 2009 by the American Geophysical Union.

  11. Close-packed array of light emitting devices

    Science.gov (United States)

    Ivanov, Ilia N.; Simpson, John T.

    2013-04-09

    A close-packed array of light emitting diodes includes a nonconductive substrate having a plurality of elongate channels extending therethrough from a first side to a second side, where each of the elongate channels in at least a portion of the substrate includes a conductive rod therein. The conductive rods have a density over the substrate of at least about 1,000 rods per square centimeter and include first conductive rods and second conductive rods. The close-packed array further includes a plurality of light emitting diodes on the first side of the substrate, where each light emitting diode is in physical contact with at least one first conductive rod and in electrical contact with at least one second conductive rod.

  12. Packing of Helices: Is Chirality the Highest Crystallographic Symmetry?

    Directory of Open Access Journals (Sweden)

    Romain Gautier

    2016-08-01

    Full Text Available Chiral structures resulting from the packing of helices are common in biological and synthetic materials. Herein, we analyze the noncentrosymmetry (NCS in such systems using crystallographic considerations. A comparison of the chiral structures built from helices shows that the chirality can be expected for specific building units such as 31/32 or 61/65 helices which, in hexagonal arrangement, will more likely lead to a chiral resolution. In these two systems, we show that the highest crystallographic symmetry (i.e., the symmetry which can describe the crystal structure from the smallest assymetric unit is chiral. As an illustration, we present the synthesis of two materials ([Zn(2,2’-bpy3](NbF62 and [Zn(2,2’-bpy3](TaF62 in which the 3n helices pack into a chiral structure.

  13. Online Variable-Sized Bin Packing with Conflicts

    DEFF Research Database (Denmark)

    Epstein, Leah; Favrholdt, Lene Monrad; Levin, Asaf

    2011-01-01

    We study a new kind of on-line bin packing with conflicts, motivated by a problem arising when scheduling jobs on the Grid. In this bin packing problem, the set of items is given at the beginning, together with a set of conflicts on pairs of items. A conflict on a pair of items implies...... that they cannot be assigned to a common bin. The online scenario is realized as follows. Variable-sized bins arrive one by one, and items need to be assigned to each bin before the next bin arrives. We analyze the online problem as well as semi-online versions of it, which are the variant where the sizes...... of the arriving bins are monotonically non-increasing as well as the variant where they are monotonically non-decreasing....

  14. The SafeCOP ECSEL Project: Safe Cooperating Cyber-Physical Systems Using Wireless Communication

    DEFF Research Database (Denmark)

    Pop, Paul; Scholle, Detlef; Hansson, Hans

    2016-01-01

    communication, multiple stakeholders, dynamic system definitions (openness), and unpredictable operating environments. SafeCOP will provide an approach to the safety assurance of CO-CPS, enabling thus their certification and development. The project will define a runtime manager architecture for runtime......This paper presents an overview of the ECSEL project entitled "Safe Cooperating Cyber-Physical Systems using Wireless Communication" (SafeCOP), which runs during the period 2016 -- 2019. SafeCOP targets safety-related Cooperating Cyber-Physical Systems (CO-CPS) characterised by use of wireless...

  15. Monitoring moving queries inside a safe region.

    Science.gov (United States)

    Al-Khalidi, Haidar; Taniar, David; Betts, John; Alamri, Sultan

    2014-01-01

    With mobile moving range queries, there is a need to recalculate the relevant surrounding objects of interest whenever the query moves. Therefore, monitoring the moving query is very costly. The safe region is one method that has been proposed to minimise the communication and computation cost of continuously monitoring a moving range query. Inside the safe region the set of objects of interest to the query do not change; thus there is no need to update the query while it is inside its safe region. However, when the query leaves its safe region the mobile device has to reevaluate the query, necessitating communication with the server. Knowing when and where the mobile device will leave a safe region is widely known as a difficult problem. To solve this problem, we propose a novel method to monitor the position of the query over time using a linear function based on the direction of the query obtained by periodic monitoring of its position. Periodic monitoring ensures that the query is aware of its location all the time. This method reduces the costs associated with communications in client-server architecture. Computational results show that our method is successful in handling moving query patterns.

  16. Distribution of breakage events in random packings of rodlike particles.

    Science.gov (United States)

    Grof, Zdeněk; Štěpánek, František

    2013-07-01

    Uniaxial compaction and breakage of rodlike particle packing has been studied using a discrete element method simulation. A scaling relationship between the applied stress, the number of breakage events, and the number-mean particle length has been derived and compared with computational experiments. Based on results for a wide range of intrinsic particle strengths and initial particle lengths, it seems that a single universal relation can be used to describe the incidence of breakage events during compaction of rodlike particle layers.

  17. Overview of the Development of Australian Combat Ration Packs

    Science.gov (United States)

    2014-12-01

    specifications and nutritional composition , and quality evaluation of ration packs and their components. She is a Professional Member of the...chocolate candy ration chocolate (x2) ration chocolate, chocolate candy vegetables (potatoes, peas, carrots , corn, baked bean)  Spread (yeast...cater for consumers with any food allergy or special dietary requirements. A look at the composition of CR1M since 1986 reveals that

  18. Pediatric body packing: drug smuggling reaches a new low.

    Science.gov (United States)

    Beno, Suzanne; Calello, Diane; Baluffi, Andrew; Henretig, Fred M

    2005-11-01

    The case of a 6-year-old boy presenting with severe clinical manifestations of an opioid intoxication and who is discovered to be an international "body packer" is presented and discussed. This article is the first to report on the phenomenon of body packing in young children. It also highlights the use of prescription opioids as cargo, which has not previously been addressed in the literature.

  19. Catalyst design for the growth of highly packed nanotube forests

    Energy Technology Data Exchange (ETDEWEB)

    Esconjauregui, Santiago; Fouquet, Martin; Bayer, Bernhard C.; Robertson, John [Engineering Department, University of Cambridge, CB2 1PZ Cambridge (United Kingdom); Ducati, Caterina [Materials Science Department, University of Cambridge, CB2 3QZ Cambridge (United Kingdom)

    2011-11-15

    We report a technique for the design of high-density catalyst nanoparticles (NPs) which allow the growth of highly packed forests of carbon nanotubes (CNTs). The technique consists of cycles of deposition and annealing of thin metal films, followed by NP immobilisation. This allows a CNT areal density of at least 10{sup 13} cm{sup -2}. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. 78 FR 17155 - Standards for the Growing, Harvesting, Packing, and Holding of Produce for Human Consumption...

    Science.gov (United States)

    2013-03-20

    ... Growing, Harvesting, Packing, and Holding of Produce for Human Consumption; Correction AGENCY: Food and..., harvesting, packing, and holding of produce, meaning fruits and vegetables grown for human consumption. FDA..., Harvesting, Packing, and Holding of Produce for Human Consumption.'' The document published with several...

  1. 78 FR 24692 - Standards for the Growing, Harvesting, Packing, and Holding of Produce for Human Consumption...

    Science.gov (United States)

    2013-04-26

    ... Growing, Harvesting, Packing, and Holding of Produce for Human Consumption; Extension of Comment Periods..., Harvesting, Packing, and Holding of Produce for Human Consumption'' that appeared in the Federal Register of... Growing, Harvesting, Packing, and Holding of Produce for Human Consumption'' with a 120-day comment period...

  2. Particle-size distribution and void fraction of geometric random packings

    NARCIS (Netherlands)

    Brouwers, Jos

    2006-01-01

    This paper addresses the geometric random packing and void fraction of polydisperse particles. It is demonstrated that the bimodal packing can be transformed into a continuous particle-size distribution of the power law type. It follows that a maximum packing fraction of particles is obtained when

  3. The generic geometry of helices and their close-packed structures

    DEFF Research Database (Denmark)

    Olsen, Kasper; Bohr, Jakob

    2010-01-01

    with values from the literature for helical polypeptide backbone structures, the alpha-, pi-. 3-10-, and gamma-helices. The alpha-helices are close to being optimally packed in the sense of efficient use of space, i.e. close-packed. They are more densely packed than the other three types of helices...

  4. Effect of particle shape on the random packing density of amorphous solids

    NARCIS (Netherlands)

    Kyrylyuk, A.V.|info:eu-repo/dai/nl/269067590; Philipse, A.P.|info:eu-repo/dai/nl/073532894

    2011-01-01

    The packing density of a particulate solid strongly depends on the shape of the particles that are jammed at random close packing (RCP). To investigate the effect of particle shape on the RCP density of an amorphous solid, we studied jammed packings of binary mixtures of a-thermal or granular

  5. 7 CFR 915.306 - Florida avocado grade, pack, and container marking regulation.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Florida avocado grade, pack, and container marking... AGRICULTURE AVOCADOS GROWN IN SOUTH FLORIDA Container and Pack Regulations § 915.306 Florida avocado grade, pack, and container marking regulation. (a) No handler shall handle any variety of avocados grown in...

  6. Evaluation of a Novel BEV Concept Based on Fixed and Swappable Li-Ion Battery Packs

    DEFF Research Database (Denmark)

    Barreras, Jorge Varela; Pinto, Claudio; de Castro, Ricardo

    2016-01-01

    by the relatively small-fixed battery pack, without the large swappable battery pack. In this way, the mass of the vehicle is reduced and, therefore, the energy consumed per unit distance is improved. For higher ranges, the BEV is powered by both battery packs. This concept allows the introduction of subscription...

  7. Method and device for loading packed goods using an intermediate load unit

    NARCIS (Netherlands)

    Reijnen, R.; Ross, L.H.A.; Houlleberghs, B.R.Y.; Naber, J.; Van der Meulen, R.J.R.

    2009-01-01

    The invention relates to a device for loading packed goods into a transport unit (8b), the device comprising an orientation unit for orienting each packed good in a predetermined direction, means for transferring the packed goods in the order of a predetermined loading sequence to the orientation

  8. Cryogenic power electronics at megawatt-scale using a new type of press-pack IGBT

    Science.gov (United States)

    Graber, L.; Saeedifard, M.; Mauger, M. J.; Yang, Q.; Park, C.; Niebur, T.; Pamidi, S. V.; Steinhoff, S.

    2017-12-01

    Electrical characteristics of a press-pack IGBT stack have been investigated experimentally in both static and dynamic tests at room temperature and at 77 K in an effort to identify a megawatt-scale class semiconductor that performs well electrically, thermally, and mechanically. It has been observed that the forward voltage drop and the turn-off time are both noticeably reduced at cryogenic temperatures, suggesting significant improvement in the device operating area. Furthermore, the stack was subjected to repeated thermal cycles between room temperature and 77 K without observing any degradation. A circuit simulation of a 200-kW boost converter based on the characterized press-back IGBT stack exhibited a reduction in switching and conduction losses at 77 K by 60% and 24%, respectively compared to the values at room temperature. It is expected that the type of press-pack IGBT stacks tested will be key elements to build high power dense, megawatt-scale cryogenic converters for future all-electric ships and electric airplanes.

  9. Bacterial Count of Pasteurized Milk Packed by Plastic Distributed in Malang Municipality

    Directory of Open Access Journals (Sweden)

    Rini Mastuti

    2012-02-01

    Full Text Available The objective of study was to investigated the number of bacteria in pasteurized milk packed by plastic and distributed in Malang Municipality. The results were compared with the standards, then. The material consisted of six different products obtained from six milk pasteurized agents. A survey research was carried out, and sampling of pasteurized milk was taken by simple random sampling and the agent was taken as total sampling. The number and type of bacteria were determined in the laboratory. TPC method was used to test the number of bacteria, MPN method on coliform bacteria, Gram colouring on bacterial identification, and TPC method on the number of bacteria in plastic packaging. Data were descriptively analysed. Compared with standard of pasteurized milk quality according to the standard regulated by government. The results showed the pasteurized milk packed by plastic distributed in Malang Municipality was unsuitable according to the standards with bacterial content and still found the coliform bacteria. It is recommended the need of agency which enable to control and testing for the products in Malang Municipality to keep quality and safety for the consument.   Keywords : bacterial count, pasteurized milk, plastic packaging.

  10. Experimental performance evaluation of sintered Gd spheres packed beds

    DEFF Research Database (Denmark)

    Tura, A.; Nielsen, Klaus K.; Van Nong, Ngo

    2016-01-01

    Research in magnetic refrigeration heavily relies on the use of packed spheres in regenerators, however little investigation to verify that such non-monolithic arrangements guarantee a sufficiently constrained structure has yet been performed. This work presents a preliminary comparison of the pe......Research in magnetic refrigeration heavily relies on the use of packed spheres in regenerators, however little investigation to verify that such non-monolithic arrangements guarantee a sufficiently constrained structure has yet been performed. This work presents a preliminary comparison...... of the performance of AMRs consisting of Gd spheres with diameters ranging from 450-550 microns partially sintered by Spark Plasma Sintering (SPS) to similar spheres, sorted in the same size range and from the same batch, but merely packed. Pressure drop is compared at uniform temperature and at a range of heat...... rejection temperatures and temperature spans. Performance is compared in terms of temperature span at a range of heat rejection temperatures (295-308 K) and 0 and 10 W cooling loads. Results show a moderate increase of pressure drop with the sintered spheres, while temperature spans were consistently 2...

  11. Carbon Sequestration in Olivine and Basalt Powder Packed Beds.

    Science.gov (United States)

    Xiong, Wei; Wells, Rachel K; Giammar, Daniel E

    2017-02-21

    Fractures and pores in basalt could provide substantial pore volume and surface area of reactive minerals for carbonate mineral formation in geologic carbon sequestration. In many fractures solute transport will be limited to diffusion, and opposing chemical gradients that form as a result of concentration differences can lead to spatial distribution of silicate mineral dissolution and carbonate mineral precipitation. Glass tubes packed with grains of olivine or basalt with different grain sizes and compositions were used to explore the identity and spatial distribution of carbonate minerals that form in dead-end one-dimensional diffusion-limited zones that are connected to a larger reservoir of water in equilibrium with 100 bar CO 2 at 100 °C. Magnesite formed in experiments with olivine, and Mg- and Ca-bearing siderite formed in experiments with flood basalt. The spatial distribution of carbonates varied between powder packed beds with different powder sizes. Packed beds of basalt powder with large specific surface areas sequestered more carbon per unit basalt mass than powder with low surface area. The spatial location and extent of carbonate mineral formation can influence the overall ability of fractured basalt to sequester carbon.

  12. Evolution of completion tools gravel pack systems for deep water

    Energy Technology Data Exchange (ETDEWEB)

    Pineda, Francisco [BJ Services Company, Houston, TX (United States); Vilela, Alvaro; Montanha, Roberto; Hightower, Chad; Acosta, Marco; Farias, Rodrigo [BJ Services do Brasil Ltda., Rio de Janeiro, RJ (Brazil)

    2004-07-01

    Conventional gravel pack or frac pack completions typically require the use of wash pipe to act as a conduit for fluid returns as well as to carry a shifting mechanism to open or close a return port. Using properly sized wash pipe can enhance the placement of the gravel across the entire annular space and the formation. It can also be used in conjunction with a shifting mechanism and a sliding sleeve to force the fluid returns to pass through the bottom of the screen. It can allow a wash-down capability while running the assembly into an open hole. In specialty systems, it can even act as a pumping conduit for post-gravel pack stimulation. However, the use of wash pipe, especially in long horizontal wells, means the loss of valuable rig time due to make up and break out of the wash pipe, or recovery if the wash pipe is stuck. Economic considerations, along with completion efficiencies, are especially important on deep water completions. Not using wash pipe reduces rig time, generating significant cost savings, and also eliminates the risk of a fishing operation. This paper reviews conventional wash pipe applications and describes new systems that accomplish the same goal with a minimum amount of wash pipe or no wash pipe at all. (author)

  13. The impact of interpretive and reductive front-of-pack labels on food choice and willingness to pay.

    Science.gov (United States)

    Talati, Zenobia; Norman, Richard; Pettigrew, Simone; Neal, Bruce; Kelly, Bridget; Dixon, Helen; Ball, Kylie; Miller, Caroline; Shilton, Trevor

    2017-12-19

    This study examined how front-of-pack labels and product healthfulness affect choice and willingness to pay across a range of foods. It was hypothesized that: (i) product choice and (ii) willingness to pay would be more aligned with product healthfulness when healthfulness was expressed through the Health Star Rating, followed by the Multiple Traffic Light, then the Daily Intake Guide, and (iii) the Nutrition Facts Panel would be viewed infrequently. Adults and children aged 10+ years (n = 2069) completed an online discrete choice task involving mock food packages. A 4 food type (cookies, corn flakes, pizza, yoghurt) × 2 front-of-pack label presence (present, absent) × 3 front-of-pack label type (Daily Intake Guide, Multiple Traffic Light, Health Star Rating) × 3 price (cheap, moderate, expensive) × 3 healthfulness (less healthy, moderately healthy, healthier) design was used. A 30 s time limit was imposed for each choice. Of the three front-of-pack labels tested, the Health Star Rating produced the largest differences in choices, with 40% (95% CIs: 38%-42%) of respondents selecting the healthier variant, 33% selecting the moderately healthy variant (95% CIs: 31%-35%), and 23% (95% CIs: 21%-24%) selecting the less healthy variant of the four products included in the study. The Multiple Traffic Light led to significant differences in choices between healthier (35%, 95% CIs: 33%-37%) and less healthy products (29%, 95% CIs: 27%-31%), but not moderately healthy products (32%, 95% CIs: 30%-34%). No significant differences in choices were observed by product healthfulness when the Daily Intake Guide was present. Only the Health Star Rating resulted in a significantly greater willingness to pay for healthier versus less healthy products. The Nutrition Facts Panel was viewed for only 7% of all mock packages. Front-of-pack labels that are more interpretive, such as the Health Star Rating, can be more effective at directing consumers towards healthier choices than

  14. Detection of relevant amounts of cow's milk protein in non-pre-packed bakery products sold as cow's milk-free.

    Science.gov (United States)

    Trendelenburg, V; Enzian, N; Bellach, J; Schnadt, S; Niggemann, B; Beyer, K

    2015-05-01

    Currently, there is no mandatory labelling of allergens for non-pre-packed foods in the EU. Therefore, consumers with food allergy rely on voluntary information provided by the staff. The aim of this study was to characterize allergic reactions to non-pre-packed foods and to investigate whether staff in bakery shops were able to give advice regarding a safe product choice. Questionnaires were sent to 200 parents of children with a food allergy. Staff of 50 bakery shops were interviewed regarding selling non-pre-packed foods to food-allergic customers. Bakery products being recommended as 'cow's milk-free' were bought, and cow's milk protein levels were measured using ELISA. A total of 104 of 200 questionnaires were returned. 25% of the children experienced an allergic reaction due to a non-pre-packed food from bakery shops and 20% from ice cream parlours. Sixty percent of the bakery staff reported serving food-allergic customers at least once a month, 24% once a week. Eighty four percent of the staff felt able to advise food-allergic consumers regarding a safe product choice. Seventy three 'cow's milk-free' products were sold in 44 bakery shops. Cow's milk could be detected in 43% of the bakery products, 21% contained >3 mg cow's milk protein per serving. Staff in bakery shops felt confident about advising customers with food allergy. However, cow's milk was detectable in almost half of bakery products being sold as 'cow's milk-free'. Every fifth product contained quantities of cow's milk exceeding an amount where approximately 10% of cow's milk-allergic children will show clinical relevant symptoms. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  15. Mismatched transfusion of 8 AB0-incompatible units of packed red blood cells in a patient with acute intermittent porphyria

    Directory of Open Access Journals (Sweden)

    Burkard Rudlof

    2011-01-01

    Full Text Available We report on a patient with acute intermittent porphyria, who received 8 AB0 incompatible units of packed red blood cells in an emergency situation. She never showed any signs of severe intravascular haemolysis. The patient died after four weeks because of a multi-organ failure caused from the malpractice of the porphyria. The problems of bedside testing, mixing field reaction, fresh frozen plasma and molecular-genetic determination of bloodgroup were discussed.

  16. ANALYSIS OF PACKERS\\' WORKLOAD ON THE PACKING LINE - A CASE STUDY

    Directory of Open Access Journals (Sweden)

    Andrzej Marek Lasota

    2014-12-01

    Full Text Available Background: One of the elements of the logistics system is the subsystem of production, which is a system composed of physical elements such as machinery and equipment, tools, and (most importantly people. In addition, systems dependent on the human operator are particularly prone to problems related to: discomfort, ensuring production quality and increases in training costs and absenteeism. Material and methods: The study was conducted in an establishment in the furniture industry, in the product packing department. The system under assessment included a position located at the conveyor belt. The aim of the study was to evaluate the load and the risk of musculoskeletal discomfort (MSD's among workers and conduct an analysis of risk factors. For the evaluation method, the Ovako Working posture Analysing System (OWAS was used. The evaluated activities related to the sequential packing of furniture in positions located at the conveyor belt. Results: The result was 7 tasks qualifying for action category (AC 1, 4 tasks for AC 2 and 5 activities for AC 4. The main risk factors influencing the negative assessment of posture were keeping the back sloped and twisted, work in a standing position and shifting weight onto one leg. Conclusions and recommendations: On each of the evaluated positions where AC 4 occurred, employees back and legs were particularly vulnerable while retrieving elements. Corrective action in these positions should be carried out as soon as possible. Ergonomic intervention should be linked to: reorganizing positions with particular emphasis on retrieving items as well as the storage of packed products; introduction of employee rotation on such positions to ensure load variation of the musculoskeletal system. After making changes on the test positions, reassessment with the OWAS method is recommended in order to verify the effectiveness of the changes.  

  17. Sun Safe Mode Controller Design for LADEE

    Science.gov (United States)

    Fusco, Jesse C.; Swei, Sean S. M.; Nakamura, Robert H.

    2015-01-01

    This paper presents the development of sun safe controllers which are designed to keep the spacecraft power positive and thermally balanced in the event an anomaly is detected. Employed by NASA's Lunar Atmosphere and Dust Environment Explorer (LADEE), the controllers utilize the measured sun vector and the spacecraft body rates for feedback control. To improve the accuracy of sun vector estimation, the least square minimization approach is applied to process the sensor data, which is proven to be effective and accurate. To validate the controllers, the LADEE spacecraft model engaging the sun safe mode was first simulated and then compared with the actual LADEE orbital fight data. The results demonstrated the applicability of the proposed sun safe controllers.

  18. The safe transport of radioactive materials

    CERN Document Server

    Gibson, R

    1966-01-01

    The Safe Transport of Radioactive Materials is a handbook that details the safety guidelines in transporting radioactive materials. The title covers the various regulations and policies, along with the safety measures and procedures of radioactive material transport. The text first details the 1963 version of the IAEA regulation for the safe transport of radioactive materials; the regulation covers the classification of radionuclides for transport purposes and the control of external radiation hazards during the transport of radioactive materials. The next chapter deals with concerns in the im

  19. Spousal Abuse in Nicholas Spark's Safe Haven

    OpenAIRE

    Sudargo, Laura M; Riyanto, Theophilus J

    2014-01-01

    Kevin Tierney is the male main character in Safe Haven who does spousal abuse toward his wife, Erin. The analysis is on what spousal abusive behavior is and what the effects of the spousal abuse are in Nicholas Spark's Safe Haven. The concept of spousal abuse proposed by Tina de Benedictis, Ph. D. is applied to reveal the spousal abuse done by Kevin and its effects on his spouse, Erin. In this research, I discover that Kevin does spousal abuse toward Erin that categorized into seven which are...

  20. Landscape planning for a safe city

    Directory of Open Access Journals (Sweden)

    M. Ishikawa

    2002-06-01

    Full Text Available To create a safe city free from natural disasters has been one of the important criteria in city planning. Since large cities have suffered from large fires caused by earthquakes, the planning of open spaces to prevent the spread of fires is part of the basic structure of city planning in Japan. Even in the feudal city of Edo, the former name of Tokyo, there had been open spaces to prevent fire disasters along canals and rivers. This paper discusses the historical evolution of open space planning, that we call landscape planning, through the experiences in Tokyo, and clarifies the characteristics and problems for achieving a safe city.