Developing the impact testing module with labVIEW

International Nuclear Information System (INIS)

Choi, Ki Soo; Jeon, Soo Hong; Jeong, Weui Bong

2007-01-01

Fast Fourier Transformation (FFT) is one of the most useful way to analyze response signal for the purpose of grasping the dynamic characteristics of system. Vibration test using impact hammer is typical and simple experimental method widely used for catching hold of dynamic peculiar characters and modal behaviors of system. In this thesis, impact testing module for NI-PXI equipment is developed. The analyzing and visualizing module are developed with labVIEW tool. A user can see quickly and easily modal shape of system after analyzing acquired data. This developed module will be expected to build up more convenient and serviceable measurement system

Using Saccharomyces cerevisiae to Test the Mutagenicity of Household Compounds: An Open Ended Hypothesis-Driven Teaching Lab

OpenAIRE

Marshall, Pamela A.

2007-01-01

In our Fundamentals of Genetics lab, students perform a wide variety of labs to reinforce and extend the topics covered in lecture. I developed an active-learning lab to augment the lecture topic of mutagenesis. In this lab exercise, students determine if a compound they bring from home is a mutagen. Students are required to read extensive background material, perform research to find a potential mutagen to test, develop a hypothesis, and bring to the lab their own suspected mutagen. This lab...

Using lab notebooks to examine students' engagement in modeling in an upper-division electronics lab course

Science.gov (United States)

Stanley, Jacob T.; Su, Weifeng; Lewandowski, H. J.

2017-12-01

We demonstrate how students' use of modeling can be examined and assessed using student notebooks collected from an upper-division electronics lab course. The use of models is a ubiquitous practice in undergraduate physics education, but the process of constructing, testing, and refining these models is much less common. We focus our attention on a lab course that has been transformed to engage students in this modeling process during lab activities. The design of the lab activities was guided by a framework that captures the different components of model-based reasoning, called the Modeling Framework for Experimental Physics. We demonstrate how this framework can be used to assess students' written work and to identify how students' model-based reasoning differed from activity to activity. Broadly speaking, we were able to identify the different steps of students' model-based reasoning and assess the completeness of their reasoning. Varying degrees of scaffolding present across the activities had an impact on how thoroughly students would engage in the full modeling process, with more scaffolded activities resulting in more thorough engagement with the process. Finally, we identified that the step in the process with which students had the most difficulty was the comparison between their interpreted data and their model prediction. Students did not use sufficiently sophisticated criteria in evaluating such comparisons, which had the effect of halting the modeling process. This may indicate that in order to engage students further in using model-based reasoning during lab activities, the instructor needs to provide further scaffolding for how students make these types of experimental comparisons. This is an important design consideration for other such courses attempting to incorporate modeling as a learning goal.

The Verification of ESF-CCS Integration Test procedure by utilizing Lab view

Energy Technology Data Exchange (ETDEWEB)

Lee, Jayoung; Lee, Sangseok; Sohn, Kwangyoung [Korea Reliability Technology and System, Daejeon (Korea, Republic of); Lee, Junku; Park, Geunok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

Since the Fukushima event, especially it is considered to be important to guarantee the safety of plant by mitigating the major accident. ESF-CCS (Engineered Safety Feature-Component Control System) is monitoring all the plant variables and generates the ESF-CCS actuation signals when the plant variables violate the setpoint. Taking a look at the classic design, ESF-CCS is composed of the sub-components such as Minimum Inventory (MI), ESCM (ESF-CCS Soft Control Module), CPM, ITP, Group Controller (GC), Loop Controller (LC), CCG (Control Channel Gate), MTP, CIM (Component Interface Module). By help of Lab view simulation in integration test procedure preparation, the following benefits are attained; - Control logic and design evaluation by Lab view - Eliminating the time-consuming test case design, and determining the 'expected result' with design validation - The reliability upgrade of integration test quality.

PD Lab

NARCIS (Netherlands)

Bilow, Marcel; Entrop, Alexis Gerardus; Lichtenberg, Jos; Stoutjesdijk, Pieter

2015-01-01

PD Lab explores the applications of building sector related product development. PD lab investigates and tests digital production technologies like CNC milled wood connections. It will also act as a platform in its wider meaning to investigate the effects and influences of file to factory

Lab-scale tests on ISV vapor transport phenomena

International Nuclear Information System (INIS)

Farnsworth, R.K.; Gardner, B.M.

1996-01-01

In situ vitrification (ISV) is a promising technology for remediating buried waste sites and contaminated soil sites. However, concerns exist that low soil permeabilities may limit vapor transport away from the advancing melt front and cause a melt expulsion that breaches ISV containment. As a result, two ISV lab tests were conducted at the Idaho National Engineering Laboratory (INEL) using INEL soil (permeability: 10 -6 cm/s) and a low permeability (10 -10 cm/s) clay material. The clay test also had a ceramic tube inserted vertically through the center of the area being melted to provide one-dimensional data on vapor transport. Results confirm that low soil permeabilities can limit vapor transport away from the advancing ISV melt front. In addition, peak pressures inside the ceramic tube were significantly greater than those outside the tube, indicating the importance of horizontal vapor transport around the advancing ISV melt front

PD Lab

Directory of Open Access Journals (Sweden)

Marcel Bilow

2015-08-01

Full Text Available PD Lab explores the applications of building sector related product development.  PD lab investigates and tests digital production technologies like CNC milled wood connections. It will also act as a platform in its wider meaning to investigate the effects and influences of file to factory production, to explore the potential in the field of sustainability, material use, logistics and the interaction of stakeholders within the chain of the building process.

Advanced LabVIEW Labs

International Nuclear Information System (INIS)

Jones, Eric D.

1999-01-01

In the world of computer-based data acquisition and control, the graphical interface program LabVIEW from National Instruments is so ubiquitous that in many ways it has almost become the laboratory standard. To date, there have been approximately fifteen books concerning LabVIEW, but Professor Essick's treatise takes on a completely different tack than all of the previous discussions. In the more standard treatments of the ways and wherefores of LabVIEW such as LabVIEW Graphical Programming: Practical Applications in Instrumentation and Control by Gary W. Johnson (McGraw Hill, NY 1997), the emphasis has been instructing the reader how to program LabVIEW to create a Virtual Instrument (VI) on the computer for interfacing to a particular instruments. LabVIEW is written in ''G'' a graphical programming language developed by National Instruments. In the past the emphasis has been on training the experimenter to learn ''G''. Without going into details here, ''G'' incorporates the usual loops, arithmetic expressions, etc., found in many programming languages, but in an icon (graphical) environment. The net result being that LabVIEW contains all of the standard methods needed for interfacing to instruments, data acquisition, data analysis, graphics, and also methodology to incorporate programs written in other languages into LabVIEW. Historically, according to Professor Essick, he developed a series of experiments for an upper division laboratory course for computer-based instrumentation. His observation was that while many students had the necessary background in computer programming languages, there were students who had virtually no concept about writing a computer program let alone a computer- based interfacing program. Thus the beginnings of a concept for not only teaching computer- based instrumentation techniques, but aiso a method for the beginner to experience writing a com- puter program. Professor Essick saw LabVIEW as the ''perfect environment in which to

Beam experiments with the Grenoble test electron cyclotron resonance ion source at iThemba LABS

Energy Technology Data Exchange (ETDEWEB)

Thomae, R., E-mail: rthomae@tlabs.ac.za; Conradie, J.; Fourie, D.; Mira, J.; Nemulodi, F. [iThemba LABS, P.O. Box 722, Somerset West 7130 (South Africa); Kuechler, D.; Toivanen, V. [CERN, BE/ABP/HSL, 1211 Geneva 23 (Switzerland)

2016-02-15

At iThemba Laboratory for Accelerator Based Sciences (iThemba LABS) an electron cyclotron ion source was installed and commissioned. This source is a copy of the Grenoble Test Source (GTS) for the production of highly charged ions. The source is similar to the GTS-LHC at CERN and named GTS2. A collaboration between the Accelerators and Beam Physics Group of CERN and the Accelerator and Engineering Department of iThemba LABS was proposed in which the development of high intensity argon and xenon beams is envisaged. In this paper, we present beam experiments with the GTS2 at iThemba LABS, in which the results of continuous wave and afterglow operation of xenon ion beams with oxygen as supporting gases are presented.

Metacognition Lab at Miles College Takes Peer Mentoring to a Higher Level

Science.gov (United States)

Chekwa, Emmanuel; Dorius, Tina

2016-01-01

Albert Einstein famously said, "I never teach my students. I only attempt to provide the conditions in which they can learn." At the Miles College Metacognition Lab, we follow a similar philosophy. In the Metacognition Lab, we teach our students to think about how they are thinking. We have created a system of student interactions that…

Valx: A System for Extracting and Structuring Numeric Lab Test Comparison Statements from Text.

Science.gov (United States)

Hao, Tianyong; Liu, Hongfang; Weng, Chunhua

2016-05-17

To develop an automated method for extracting and structuring numeric lab test comparison statements from text and evaluate the method using clinical trial eligibility criteria text. Leveraging semantic knowledge from the Unified Medical Language System (UMLS) and domain knowledge acquired from the Internet, Valx takes seven steps to extract and normalize numeric lab test expressions: 1) text preprocessing, 2) numeric, unit, and comparison operator extraction, 3) variable identification using hybrid knowledge, 4) variable - numeric association, 5) context-based association filtering, 6) measurement unit normalization, and 7) heuristic rule-based comparison statements verification. Our reference standard was the consensus-based annotation among three raters for all comparison statements for two variables, i.e., HbA1c and glucose, identified from all of Type 1 and Type 2 diabetes trials in ClinicalTrials.gov. The precision, recall, and F-measure for structuring HbA1c comparison statements were 99.6%, 98.1%, 98.8% for Type 1 diabetes trials, and 98.8%, 96.9%, 97.8% for Type 2 diabetes trials, respectively. The precision, recall, and F-measure for structuring glucose comparison statements were 97.3%, 94.8%, 96.1% for Type 1 diabetes trials, and 92.3%, 92.3%, 92.3% for Type 2 diabetes trials, respectively. Valx is effective at extracting and structuring free-text lab test comparison statements in clinical trial summaries. Future studies are warranted to test its generalizability beyond eligibility criteria text. The open-source Valx enables its further evaluation and continued improvement among the collaborative scientific community.

Development and design of a late-model fitness test instrument based on LabView

Science.gov (United States)

Xie, Ying; Wu, Feiqing

2010-12-01

Undergraduates are pioneers of China's modernization program and undertake the historic mission of rejuvenating our nation in the 21st century, whose physical fitness is vital. A smart fitness test system can well help them understand their fitness and health conditions, thus they can choose more suitable approaches and make practical plans for exercising according to their own situation. following the future trends, a Late-model fitness test Instrument based on LabView has been designed to remedy defects of today's instruments. The system hardware consists of fives types of sensors with their peripheral circuits, an acquisition card of NI USB-6251 and a computer, while the system software, on the basis of LabView, includes modules of user register, data acquisition, data process and display, and data storage. The system, featured by modularization and an open structure, is able to be revised according to actual needs. Tests results have verified the system's stability and reliability.

First commissioning results with the Grenoble test electron cyclotron resonance ion source at iThemba LABS

Energy Technology Data Exchange (ETDEWEB)

Thomae, R.; Conradie, J.; Delsink, H.; Du Plessis, H.; Fourie, D.; Klopp, M.; Kohler, I.; Lussi, C.; McAlister, R.; Ntshangase, S.; Sakildien, M. [iThemba LABS, P.O Box 722, Somerset West 7130 (South Africa); Hitz, D. [CEA/DRFMC, 17 Av. Des Martyrs, 38054, Grenoble Cedex 9 (France); Kuechler, D. [CERN, BE/ABP/HSL, 1211 Geneva 23 (Switzerland)

2012-02-15

iThemba Laboratory for Accelerator Based Science (iThemba LABS) is a multi-disciplinary accelerator facility. One of its main activities is the operation of a separated-sector cyclotron with a K-value of 200, which provides beams of various ion species. These beams are used for fundamental nuclear physics research in the intermediate energy region, radioisotope production, and medical physics applications. Due to the requirements of nuclear physics for new ion species and higher energies, the decision was made to install a copy of the so-called Grenoble test source (GTS) at iThemba LABS. In this paper, we will report on the experimental setup and the first results obtained with the GTS2 at iThemba LABS.

First commissioning results with the Grenoble test electron cyclotron resonance ion source at iThemba LABS

International Nuclear Information System (INIS)

Thomae, R.; Conradie, J.; Delsink, H.; Du Plessis, H.; Fourie, D.; Klopp, M.; Kohler, I.; Lussi, C.; McAlister, R.; Ntshangase, S.; Sakildien, M.; Hitz, D.; Kuechler, D.

2012-01-01

iThemba Laboratory for Accelerator Based Science (iThemba LABS) is a multi-disciplinary accelerator facility. One of its main activities is the operation of a separated-sector cyclotron with a K-value of 200, which provides beams of various ion species. These beams are used for fundamental nuclear physics research in the intermediate energy region, radioisotope production, and medical physics applications. Due to the requirements of nuclear physics for new ion species and higher energies, the decision was made to install a copy of the so-called Grenoble test source (GTS) at iThemba LABS. In this paper, we will report on the experimental setup and the first results obtained with the GTS2 at iThemba LABS.

LabVIEW 8 student edition

CERN Document Server

Bishop, Robert H

2007-01-01

For courses in Measurement and Instrumentation, Electrical Engineering lab, and Physics and Chemistry lab. This revised printing has been updated to include new LabVIEW 8.2 Student Edition. National Instruments' LabVIEW is the defacto industry standard for test, measurement, and automation software solutions. With the Student Edition of LabVIEW, students can design graphical programming solutions to their classroom problems and laboratory experiments with software that delivers the graphical programming capabilites of the LabVIEW professional version. . The Student Edition is also compatible with all National Instruments data acquisition and instrument control hardware. Note: The LabVIEW Student Edition is available to students, faculty, and staff for personal educational use only. It is not intended for research, institutional, or commercial use. For more information about these licensing options, please visit the National Instruments website at (http:www.ni.com/academic/)

Using Saccharomyces cerevisiae to test the mutagenicity of household compounds: an open ended hypothesis-driven teaching lab.

Science.gov (United States)

Marshall, Pamela A

2007-01-01

In our Fundamentals of Genetics lab, students perform a wide variety of labs to reinforce and extend the topics covered in lecture. I developed an active-learning lab to augment the lecture topic of mutagenesis. In this lab exercise, students determine if a compound they bring from home is a mutagen. Students are required to read extensive background material, perform research to find a potential mutagen to test, develop a hypothesis, and bring to the lab their own suspected mutagen. This lab uses a specially developed strain of Saccharomyces cerevisiae, D7, to determine if a compound is a mutagen. Mutagenesis of the D7 genome can lead to a scorable alteration in the phenotypes of this strain. Students outline and carry out a protocol for treatment of the yeast tester strain, utilizing the concept of dose/response and positive and negative controls. Students report on their results using a PowerPoint presentation to simulate giving a scientific presentation. The students' self-assessment of their knowledge indicated that, in all cases, the students felt that they knew more about the assay, mutagenesis, and the relationship between genotype and phenotype (P exercise.

Low Level RF System for Jefferson Lab Cryomodule Test Facility

International Nuclear Information System (INIS)

Tomasz Plawski; Trent Allison; Jean Delayen; J. Hovater; Thomas Powers

2003-01-01

The Jefferson Lab Cryomodule Test Facility (CMTF) has been upgraded to test and commission SNS and CEBAF Energy Upgrade cryomodules. Part of the upgrade was to modernize the superconducting cavity instrumentation and control. We have designed a VXI based RF control system exclusively for the production testing of superconducting cavities. The RF system can be configured to work either in Phase Locked Loop (PLL) or Self Excited Loop (SEL) mode. It can be used to drive either SNS 805 MHz or CEBAF Energy Upgrade 1497 MHz superconducting cavities and can be operated in pulsed or continuous wave (CW) mode. The base design consists of RF-analog and digital sections. The RF-analog section includes a Voltage Control Oscillator (VCO), phase detector, IandQ modulator and ''low phase shift'' limiter. The digital section controls the analog section and includes ADC, FPGA, and DAC . We will discuss the design of the RF system and how it relates to the support of cavity testing

Secondary side TSP deposit buildup: lab test investigation focused on electrokinetic considerations

International Nuclear Information System (INIS)

Barale, M.; Guillodo, M.; Foucault, M.; Ryckelynck, N.; Clinard, M-H.; Chahma, F.; Brun, C.; Corredera, G.

2010-01-01

Deposit buildup which caused the clogging of the 'foils' of the upper tube-support-plates (TSP) inside a PWR steam generator of French NPPs in 2006 presents certain similarities with deposits observed in lab tests performed in secondary coolant chemistry at the Technical Centre of AREVA NP in 2002. The mechanism of TSP clogging seems not to present obvious phenomenological links with the fouling of the free span of SG since deposits buildup is quite uniform and is currently related to a surface boiling effect due to the surface heat flux. A specific mechanism could account for TSP clogging. In particular, electrokinetic effects were investigated by EDF-CEIDRE and AREVA NP SAS in the framework of a lab test program started in 2007. The electrokinetic approach is to consider that the coupling of local hydrodynamic and surface electrochemistry could lead to the formation of a very localized and heterogeneous deposit at the leading edge between both TSP and SG tubing material. Electrokinetic effects can lead to the oxidation and/or the precipitation of ferrous ions and to a variation of the electrokinetic potential which can produce strong attraction of iron oxide colloids. These electrokinetic effects are dependent of the T/H and local hydrodynamic conditions and surface electrochemistry explaining. The objective of this EDF-AREVA lab test program is to investigate the role of secondary chemistry coolant (pH, DH, N 2 H 4 , amine, redox) and of the nature of materials (SS, Ni base alloy) on deposit buildup. Properties of oxide surface and zeta potential of oxidized metallic materials have been also determined at temperature to understand their potential contribution on mechanism of TSP clogging in secondary side chemistry coolant. In this paper, a set of specific experiments carried out in this frame have been presented and discussed, paying particular attention to the effects of electrokinetic considerations and surface charges at oxide-solution interfaces

Secondary side TSP deposit buildup: lab test investigation focused on electrokinetic considerations

Energy Technology Data Exchange (ETDEWEB)

Barale, M.; Guillodo, M.; Foucault, M., E-mail: Morgan.Barale@areva.com [AREVA NP SAS, Technical Centre, Le Creusot (France); Ryckelynck, N.; Clinard, M-H.; Chahma, F.; Brun, C. [AREVA NP SAS, Chemistry and Radiochemistry Group, Paris (France); Corredera, G. [Electricite de France, Centre d' Expertise et d' Inspection dans les domaines de la Realisation et de l' Exploitation, Saint-Denis (France)

2010-07-01

Deposit buildup which caused the clogging of the 'foils' of the upper tube-support-plates (TSP) inside a PWR steam generator of French NPPs in 2006 presents certain similarities with deposits observed in lab tests performed in secondary coolant chemistry at the Technical Centre of AREVA NP in 2002. The mechanism of TSP clogging seems not to present obvious phenomenological links with the fouling of the free span of SG since deposits buildup is quite uniform and is currently related to a surface boiling effect due to the surface heat flux. A specific mechanism could account for TSP clogging. In particular, electrokinetic effects were investigated by EDF-CEIDRE and AREVA NP SAS in the framework of a lab test program started in 2007. The electrokinetic approach is to consider that the coupling of local hydrodynamic and surface electrochemistry could lead to the formation of a very localized and heterogeneous deposit at the leading edge between both TSP and SG tubing material. Electrokinetic effects can lead to the oxidation and/or the precipitation of ferrous ions and to a variation of the electrokinetic potential which can produce strong attraction of iron oxide colloids. These electrokinetic effects are dependent of the T/H and local hydrodynamic conditions and surface electrochemistry explaining. The objective of this EDF-AREVA lab test program is to investigate the role of secondary chemistry coolant (pH, DH, N{sub 2}H{sub 4}, amine, redox) and of the nature of materials (SS, Ni base alloy) on deposit buildup. Properties of oxide surface and zeta potential of oxidized metallic materials have been also determined at temperature to understand their potential contribution on mechanism of TSP clogging in secondary side chemistry coolant. In this paper, a set of specific experiments carried out in this frame have been presented and discussed, paying particular attention to the effects of electrokinetic considerations and surface charges at oxide

FameLab Switzerland: a CERN PhD student triumphs

CERN Multimedia

Alexander Brown

2013-01-01

Would you be able to explain your work to a non-specialist in just three minutes? On Friday 24 May, the Swiss national final of FameLab saw six young researchers from CERN attempt just that. FameLab is an international competition in the style of a TV talent show, seeking out the next generation of talent in science communication.   Participants in the Swiss national final of FameLab alongside Deni Subasic, presenter of the event (far left), on Friday 24 May. Having qualified from the Geneva heat held in the Globe in March, the six CERN representatives took to the stage in Moods bar in Zurich. As well as particle physics, from the fundamental building blocks (literally) of the Standard Model to medical applications, the line-up featured immunology, neurology and genetics. Although slideshows are strictly banned from FameLab, other visual props are strongly encouraged. For instance, Piotr Traczyk (CMS) represented the apparent chaos of particle collisions by throwing together two decks of ca...

GeoLab: A Geological Workstation for Future Missions

Science.gov (United States)

Evans, Cynthia; Calaway, Michael; Bell, Mary Sue; Li, Zheng; Tong, Shuo; Zhong, Ye; Dahiwala, Ravi

2014-01-01

The GeoLab glovebox was, until November 2012, fully integrated into NASA's Deep Space Habitat (DSH) Analog Testbed. The conceptual design for GeoLab came from several sources, including current research instruments (Microgravity Science Glovebox) used on the International Space Station, existing Astromaterials Curation Laboratory hardware and clean room procedures, and mission scenarios developed for earlier programs. GeoLab allowed NASA scientists to test science operations related to contained sample examination during simulated exploration missions. The team demonstrated science operations that enhance theThe GeoLab glovebox was, until November 2012, fully integrated into NASA's Deep Space Habitat (DSH) Analog Testbed. The conceptual design for GeoLab came from several sources, including current research instruments (Microgravity Science Glovebox) used on the International Space Station, existing Astromaterials Curation Laboratory hardware and clean room procedures, and mission scenarios developed for earlier programs. GeoLab allowed NASA scientists to test science operations related to contained sample examination during simulated exploration missions. The team demonstrated science operations that enhance the early scientific returns from future missions and ensure that the best samples are selected for Earth return. The facility was also designed to foster the development of instrument technology. Since 2009, when GeoLab design and construction began, the GeoLab team [a group of scientists from the Astromaterials Acquisition and Curation Office within the Astromaterials Research and Exploration Science (ARES) Directorate at JSC] has progressively developed and reconfigured the GeoLab hardware and software interfaces and developed test objectives, which were to 1) determine requirements and strategies for sample handling and prioritization for geological operations on other planetary surfaces, 2) assess the scientific contribution of selective in-situ sample

LabVIEW Support at CERN

CERN Multimedia

HR Department

2010-01-01

Since the beginning of 2009, due to the CERN restructuring, LabVIEW support moved from the IT to the EN department, joining the Industrial Controls and Electronics Group (ICE). LabVIEW support has been merged with the Measurement, Test and Analysis (MTA) section which, using LabVIEW, has developed most of the measurement systems to qualify the LHC magnets and components over the past 10 years. The post mortem analysis for the LHC hardware commissioning has also been fully implemented using LabVIEW, customised into a framework, called RADE, for CERN needs. The MTA section has started with a proactive approach sharing its tools and experience with the CERN LabVIEW community. Its framework (RADE) for CERN integrated application development has been made available to the users. Courses on RADE have been integrated into the standard National Instruments training program at CERN. RADE and LabVIEW support were merged together in 2010 on a single email address:labview.support@cern.ch For more information please...

Virtual labs in Leonardo da Vinci

Directory of Open Access Journals (Sweden)

Stanislaw Nagy

2006-10-01

Full Text Available This paper discusses the problem of virtual lab capabilities in the e-learning. Using combination of web conferencing and "virtual labs" capabilities, a new quality distance learning teaching is now in preparation and will be included in the course teaching to produce interactive, online simulations for the natural gas engineering studies. The activities are designed to enhance the existing curriculum and to include online assessments. A special care is devoted to the security problem between a server and a client computer. Several examples of the virtual labs related to the PVT thermodynamics, fluid flow, the natural gas well-testing, and thev gas network flow are prepared and tested. A major challenge for the 'CELGAS' system is in managing the delicate balance between the student collaboration and the isolation. Students may be encouraged to collaborate and work with each other, simulating their exploration of the lab material.

Bayesian tests to quantify the result of a replication attempt

NARCIS (Netherlands)

Verhagen, J.; Wagenmakers, E.-J.

2014-01-01

Replication attempts are essential to the empirical sciences. Successful replication attempts increase researchers’ confidence in the presence of an effect, whereas failed replication attempts induce skepticism and doubt. However, it is often unclear to what extent a replication attempt results in

New Results on Testing Duality in Spin Structure from Jefferson Lab

Energy Technology Data Exchange (ETDEWEB)

Nilanga Liyanage

2005-10-01

The Bloom-Gilman duality has been experimentally demonstrated for spin independent structure functions. Duality is observed when the smooth scaling curve at high momentum transfer is an average over the resonance bumps at lower momentum transfer, but at the same value of scaling variable x. Signs of quark-hadron duality for the spin Dependant structure function g1 of the proton has been recently reported by the Hermes collaboration. Experimental Halls A, B and C at Jefferson lab have recently measured spin structure functions in the resonance region for the proton and the neutron. Data from these experiments combined with Deep-Inelastic-Scattering data provide a precision test of quark-hadron duality predictions for spin structure functions for both the proton and the neutron. This will be one of the first precision tests of spin and flavor dependence of quark-hadron duality.

LAB3 Cosmic Ray Test Stand Analysis of Steel Stack Supports

International Nuclear Information System (INIS)

Cease, H.

1998-01-01

A cosmic ray test stand is being constructed at Lab 3. The stand consists of two stacks of steel plates one resting on top of the other. The top stack is composed of 6 plates of steel making an overall stack size of 34.5-inch x 40-inch x 99-inch. The bottom stack also has 6 layers of plate making an overall size of approximately 49.5-inch x 82-inch x 99-inch. The bottom stack is supported with three support legs. See drawing 3823.000ME-900428 for the individual plate orientation. The minimum support leg size and necessary welds between plates are determined.

What Is LAB and Why Was It Renormed?

Science.gov (United States)

Abbott, Muriel

A report on the Language Assessment Battery (LAB) explains, in question-and-answer form, the causes and results of some changes made in the test norms. The LAB is a test of communicative language competence, written in English and Spanish versions and used for student placement in the New York City Public Schools. The report describes the test…

Online labs and the MARVEL experience

Directory of Open Access Journals (Sweden)

Dieter Mueller

2005-06-01

Full Text Available MARVEL is a Leonardo da Vinci project that provides a framework to analyse the pedagogic effectiveness of online labs in various heterogeneous areas that include solar energy, robotics, electronics and electro-pneumatics. It is also used as a test bench to compare the implementation of purely remote labs, where all devices are real, versus mixed-reality environments, where real devices work together with simulation models. This paper describes the basic concepts underlying the implementation of such online labs and presents two case studies (which are openly available to the public. A final section discusses the main pedagogical implications of online labs and presents the research directions that are being considered as a follow-up from this project.

An automatic monitoring system of leak current for testing TGC detectors based on LabVIEW

International Nuclear Information System (INIS)

Feng Cunfeng; Lu Taiguo; Yan Zhen; Wang Suojie; Zhu Chengguang; Sun Yansheng; He Mao

2005-01-01

An automatic monitoring system of leak current for testing TGC detectors with high voltage was set up by using the graphic LabVIEW platform and NI 4351 data acquisition card. The leak current was automatically monitored and recorded with this system, the time and the value of the leak current were showed instantly. Good efficiency and precision of monitoring were obtained. (authors)

Establishment of a new in vitro test method for evaluation of eye irritancy using a reconstructed human corneal epithelial model, LabCyte CORNEA-MODEL.

Science.gov (United States)

Katoh, Masakazu; Hamajima, Fumiyasu; Ogasawara, Takahiro; Hata, Ken-ichiro

2013-12-01

Finding in vitro eye irritation testing alternatives to animal testing such as the Draize eye test, which uses rabbits, is essential from the standpoint of animal welfare. It has been developed a reconstructed human corneal epithelial model, the LabCyte CORNEA-MODEL, which has a representative corneal epithelium-like structure. Protocol optimization (pre-validation study) was examined in order to establish a new alternative method for eye irritancy evaluation with this model. From the results of the optimization experiments, the application periods for chemicals were set at 1min for liquid chemicals or 24h for solid chemicals, and the post-exposure incubation periods were set at 24h for liquids or zero for solids. If the viability was less than 50%, the chemical was judged to be an eye irritant. Sixty-one chemicals were applied in the optimized protocol using the LabCyte CORNEA-MODEL and these results were evaluated in correlation with in vivo results. The predictions of the optimized LabCyte CORNEA-MODEL eye irritation test methods were highly correlated with in vivo eye irritation (sensitivity 100%, specificity 80.0%, and accuracy 91.8%). These results suggest that the LabCyte CORNEA-MODEL eye irritation test could be useful as an alternative method to the Draize eye test. Copyright © 2013 Elsevier Ltd. All rights reserved.

User recruitment, training, and support at NOAO Data Lab

Science.gov (United States)

Nikutta, Robert; Fitzpatrick, Michael J.; NOAO Data Lab

2018-06-01

The NOAO Data Lab (datalab.noao.edu) is a fully-fledged science data & analysis platform. However, simply building a science platform is notenough to declare it a success. Like any such system built for users, it needs actual users who see enough value in it to be willing toovercome the inertia of registering an account, studying the documentation, working through examples, and ultimately attempting tosolve their own science problems using the platform. The NOAO Data Lab has been open to users since June 2016. In this past year we haveregistered hundreds of users and improved the system, not least through the interaction with and feedback from our users. The posterwill delineate our efforts to recruit new users through conference presentations, platform demos and user workshops, and what we do toassure that users experience their first steps and their learning process with Data Lab as easy, competent, and inspiring. It will alsopresent our efforts in user retention and user support, from a human-staffed helpdesk, to one-on-one sessions, to regular"bring-your-own-problem (BYOP)" in-house sessions with interested users.

Common Systems Integration Lab (CSIL)

Data.gov (United States)

Federal Laboratory Consortium — The Common Systems Integration Lab (CSIL)supports the PMA-209 Air Combat Electronics Program Office. CSIL also supports development, test, integration and life cycle...

Real Life Lab BIPV field testing in the Netherlands

NARCIS (Netherlands)

Ritzen, M.; Vroon, Z.; Rovers, R.; Geurts, C.; Blocken, B.

2015-01-01

Integration of PV in the Building Envelope (BIPV) is one of the four key developments necessary for large market PV penetration, together with PV efficiency improvement, price decrease and electricity storage [1]. In the course of BIPV development, Real-Life Lab demonstration projects are realized

Real life lab BIPV field testing in the Netherlands

NARCIS (Netherlands)

Ritzen, M.J.; Vroon, Z.; Geurts, C.P.W.; Rovers, R.; Blocken, B.J.E.

2015-01-01

Integration of PV in the Building Envelope (BIPV) is one of the four key developments necessary for large market PV penetration, together with PV efficiency improvement, price decrease and electricity storage [1]. In the course of BIPV development, Real-Life Lab demonstration projects are realized

Fifteen years experience: Egyptian metabolic lab

Directory of Open Access Journals (Sweden)

Ekram M. Fateen

2014-10-01

Conclusion: This study illustrates the experience of the reference metabolic lab in Egypt over 15 years. The lab began metabolic disorder screening by using simple diagnostic techniques like thin layer chromatography and colored tests in urine which by time updated and upgraded the methods to diagnose a wide range of disorders. This study shows the most common diagnosed inherited inborn errors of metabolism among the Egyptian population.

Behavior of TiO₂ nanoparticles during incineration of solid paint waste: a lab-scale test.

Science.gov (United States)

Massari, Andrea; Beggio, Marta; Hreglich, Sandro; Marin, Riccardo; Zuin, Stefano

2014-10-01

In order to assess the potential impacts posed by products containing engineered nanoparticles, it is essential to generate more data about the release of these particles from products' life cycle. Although first studies were performed to investigate the release of nanoparticles from use phase, very few data are available on the potential release from recycling or disposal of nano-enhanced products. In this work, we investigated the behavior of TiO2 nanoparticles from incineration of solid paint waste containing these particles. Solid paint debris with and without TiO2 nanoparticles were treated in a lab scale incineration plant at 950°C (combustion temperature) and in oxidizing atmosphere. The obtained ashes were also vitrified with additives and the release of Ti was finally evaluated by leaching test. From our incineration lab-scale experiment, we did not observe a release of TiO2 nanoparticles into the atmosphere, and Ti was attached to the surface of obtained solid residues (i.e. ashes). The characterization of ashes showed that TiO2 nanoparticles reacted during the incineration to give calcium titanate. Finally, a very low release of Ti was measured, less 1 mg/kg, during the leaching test of ashes vitrified with glass cullet and feldspathic inert. Our work suggests that TiO2 nanoparticles added in paints may undergo to physicochemical transformation during the incineration, and that Ti found in ashes may be strongly immobilized in glass matrix. Since this conclusion is based on lab-scale experiment, further research is required to identify which nanoparticles will be emitted to the environment from a real-word-incineration system of household hazardous waste. Copyright © 2014 Elsevier Ltd. All rights reserved.

Digital Design with KP-Lab

Directory of Open Access Journals (Sweden)

D. Ponta

2007-08-01

Full Text Available KP-Lab is an EU Integrated Project envisioning a learning system that facilitates innovative practices of sharing, creating and working with knowledge in education and workplaces. The project exploits a novel pedagogical view, the knowledge-creation metaphor of learning. According to such “trialogical” approach, cognition arises through collaborative work in systematically developing shared “knowledge artefacts”, such as concepts, plans, material products, or social practices. The paper presents the plan of a pilot course to test the KP-Lab methodologies and tools in the field of Digital Design.

Advanced HVAC modeling with FemLab/Simulink/MatLab

NARCIS (Netherlands)

Schijndel, van A.W.M.

2003-01-01

The combined MatLab toolboxes FemLab and Simulink are evaluated as solvers for HVAC problems based on partial differential equations (PDEs). The FemLab software is designed to simulate systems of coupled PDEs, 1-D, 2-D or 3-D, nonlinear and time dependent. In order to show how the program works, a

FOREWORD: Jefferson Lab: A Long Decade of Physics

Science.gov (United States)

Montgomery, Hugh

2011-04-01

Jefferson Lab Jefferson Lab was created in 1984 and started operating in about 1996. 2011 is an appropriate time to try to take a look at the results that have appeared, what has been learned, and what has been exciting for our scientific community. Rather than attempt to construct a coherent view with a single author or at least a small number, we have, instead, invited small groups of people who have been intimately involved in the work itself to make contributions. These people are accelerator experts, experimentalists and theorists, staff and users. We have, in the main, sought reviews of the actual sub-fields. The primary exception is the first paper, which sets the scene as it was, in one person's view, at the beginning of Jefferson Lab. In reviewing the material as it appeared, I was impressed by the breadth of the material. Major advances are documented from form factors to structure functions, from spectroscopy to physics beyond the standard model of nuclear and particle physics. Recognition of the part played by spin, the helicities of the beams, the polarizations of the targets, and the polarizations of final state particles, is inescapable. Access to the weak interaction amplitudes through measurements of the parity violating asymmetries has led to quantification of the strange content of the nucleon and the neutron radius of lead, and to measurements of the electroweak mixing angle. Lattice QCD calculations flourished and are setting the platform for understanding of the spectroscopy of baryons and mesons. But the star of the game was the accelerator. Its performance enabled the physics and also the use of the technology to generate a powerful free electron laser. These important pieces of Jefferson Lab physics are given their place. As the third Director of Jefferson Lab, and on behalf of the other physicists and others presently associated with the lab, I would like to express my admiration and gratitude for the efforts of the directors, chief

Jefferson Lab: A Long Decade of Physics

International Nuclear Information System (INIS)

Montgomery, Hugh

2011-01-01

Jefferson Lab was created in 1984 and started operating in about 1996. 2011 is an appropriate time to try to take a look at the results that have appeared, what has been learned, and what has been exciting for our scientific community. Rather than attempt to construct a coherent view with a single author or at least a small number, we have, instead, invited small groups of people who have been intimately involved in the work itself to make contributions. These people are accelerator experts, experimentalists and theorists, staff and users. We have, in the main, sought reviews of the actual sub-fields. The primary exception is the first paper, which sets the scene as it was, in one person's view, at the beginning of Jefferson Lab. In reviewing the material as it appeared, I was impressed by the breadth of the material. Major advances are documented from form factors to structure functions, from spectroscopy to physics beyond the standard model of nuclear and particle physics. Recognition of the part played by spin, the helicities of the beams, the polarizations of the targets, and the polarizations of final state particles, is inescapable. Access to the weak interaction amplitudes through measurements of the parity violating asymmetries has led to quantification of the strange content of the nucleon and the neutron radius of lead, and to measurements of the electroweak mixing angle. Lattice QCD calculations flourished and are setting the platform for understanding of the spectroscopy of baryons and mesons. But the star of the game was the accelerator. Its performance enabled the physics and also the use of the technology to generate a powerful free electron laser. These important pieces of Jefferson Lab physics are given their place. As the third Director of Jefferson Lab, and on behalf of the other physicists and others presently associated with the lab, I would like to express my admiration and gratitude for the efforts of the directors, chief scientists

Using "Saccharomyces cerevisiae" to Test the Mutagenicity of Household Compounds: An Open Ended Hypothesis-Driven Teaching Lab

Science.gov (United States)

Marshall, Pamela A.

2007-01-01

In our Fundamentals of Genetics lab, students perform a wide variety of labs to reinforce and extend the topics covered in lecture. I developed an active-learning lab to augment the lecture topic of mutagenesis. In this lab exercise, students determine if a compound they bring from home is a mutagen. Students are required to read extensive…

EUSO@TurLab: An experimental replica of ISS orbits

Directory of Open Access Journals (Sweden)

Bertaina M.

2015-01-01

Full Text Available The EUSO@TurLab project is an on-going activity aimed to reproduce atmospheric and luminous conditions that JEM-EUSO will encounter on its orbits around the Earth. The use of the TurLab facility, part of the Department of Physics of the University of Torino, allows the simulation of different surface conditions in a very dark and rotating environment in order to test the response of JEM-EUSO's sensors and sensitivity. The experimental setup currently in operation has been used to check the potential of the TurLab facility for the above purposes, and the acquired data will be used to test the concept of JEM-EUSO's trigger system.

Photonics and Fiber Optics Processor Lab

Data.gov (United States)

Federal Laboratory Consortium — The Photonics and Fiber Optics Processor Lab develops, tests and evaluates high speed fiber optic network components as well as network protocols. In addition, this...

Designing inquiry learning spaces for online labs in the Go-Lab platform

NARCIS (Netherlands)

de Jong, Ton; Gillet, Dennis; Sotiriou, Sofoklis; Agogi, Ellinogermaniki; Zacharia, Zacharias

2015-01-01

The Go-Lab project (http://www.go-lab-project.eu/) aims to enable the integration of online labs through inquiry-based learning approaches into science classrooms. Through the use of an advanced plug and play technological solution the Go-Lab project opens up remote science laboratories, data

Wisconsin Card Sorting Test performance and impulsivity in patients with temporal lobe epilepsy: suicidal risk and suicide attempts.

Science.gov (United States)

Garcia Espinosa, Arlety; Andrade Machado, René; Borges González, Susana; García González, María Eugenia; Pérez Montoto, Ariadna; Toledo Sotomayor, Guillermo

2010-01-01

The goal of the study described here was to determine if executive dysfunction and impulsivity are related to risk for suicide and suicide attempts in patients with temporal lobe epilepsy. Forty-two patients with temporal lobe epilepsy were recruited. A detailed medical history, neurological examination, serial EEGs, Mini-International Neuropsychiatric Interview, executive function, and MRI were assessed. Multiple regression analysis was carried out to examine predictive associations between clinical variables and Wisconsin Card Sorting Test measures. Patients' scores on the Risk for Suicide Scale (n=24) were greater than 7, which means they had the highest relative risk for suicide attempts. Family history of psychiatric disease, current major depressive episode, left temporal lobe epilepsy, and perseverative responses and total errors on the Wisconsin Card Sorting Test increased by 6.3 and 7.5 suicide risk and suicide attempts, respectively. Executive dysfunction (specifically perseverative responses and more total errors) contributed greatly to suicide risk. Executive performance has a major impact on suicide risk and suicide attempts in patients with temporal lobe epilepsy. 2009 Elsevier Inc. All rights reserved.

Innovations in STEM education: the Go-Lab federation of online labs

NARCIS (Netherlands)

de Jong, Anthonius J.M.; Sotiriou, Sofoklis; Gillet, Dennis

2014-01-01

The Go-Lab federation of online labs opens up virtual laboratories (simulation), remote laboratories (real equipment accessible at distance) and data sets from physical laboratory experiments (together called “online labs”) for large-scale use in education. In this way, Go-Lab enables inquiry-based

Innovative Use of a Classroom Response System During Physics Lab

Science.gov (United States)

Walgren, Jay

2011-01-01

More and more physics instructors are making use of personal/classroom response systems or "clickers." The use of clickers to engage students with multiple-choice questions during lecture and available instructor resources for clickers have been well documented in this journal.1-4 Newer-generation clickers, which I refer to as classroom response systems (CRS), have evolved to accept numeric answers (such as 9.81) instead of just single "multiple-choice" entries (Fig. 1). This advancement is available from most major clicker companies and allows for a greater variety of engaging questions during lecture. In addition, these new "numeric ready" clickers are marketed to be used for student assessments. During a test or quiz, students' answers are entered into their clicker instead of on paper or Scantron® and immediately absorbed by wireless connection into a computer for grading and analysis. I recognize the usefulness and benefit these new-generation CRSs provide for many instructors. However, I do not use my CRS in either of the aforementioned activities. Instead, I use it in an unconventional way. I use the CRS to electronically capture students' lab data as they are performing a physics lab (Fig. 2). I set up the clickers as if I were going to use them for a test, but instead of entering answers to a test, my students enter lab data as they collect it. In this paper I discuss my use of a classroom response system during physics laboratory and three benefits that result: 1) Students are encouraged to "take ownership of" and "have integrity with" their physics lab data. 2) Students' measuring and unit conversion deficiencies are identified immediately during the lab. 3) The process of grading students' labs is simplified because the results of each student's lab calculations can be pre-calculated for the instructor using a spreadsheet. My use of clickers during lab can be implemented with most clicker systems available to instructors today. The CRS I use is the e

Peer assessment of student-produced mechanics lab report videos

Science.gov (United States)

Douglas, Scott S.; Aiken, John M.; Lin, Shih-Yin; Greco, Edwin F.; Alicea-Muñoz, Emily; Schatz, Michael F.

2017-12-01

We examine changes in students' rating behavior during a semester-long sequence of peer evaluation laboratory exercises in an introductory mechanics course. We perform a quantitative analysis of the ratings given by students to peers' physics lab reports, and conduct interviews with students. We find that peers persistently assign higher ratings to lab reports than do experts, that peers begin the semester by giving high ratings most frequently and end the semester with frequent middle ratings, and that peers go through the semester without much change in the frequency of low ratings. We then use student interviews to develop a model for student engagement with peer assessment. This model is based on two competing influences which appear to shape peer evaluation behavior: a strong disinclination to give poor ratings with a complementary preference to give high ratings when in doubt, and an attempt to develop an expertlike criticality when assessing peers' work.

Peer assessment of student-produced mechanics lab report videos

Directory of Open Access Journals (Sweden)

Scott S. Douglas

2017-11-01

Full Text Available We examine changes in students’ rating behavior during a semester-long sequence of peer evaluation laboratory exercises in an introductory mechanics course. We perform a quantitative analysis of the ratings given by students to peers’ physics lab reports, and conduct interviews with students. We find that peers persistently assign higher ratings to lab reports than do experts, that peers begin the semester by giving high ratings most frequently and end the semester with frequent middle ratings, and that peers go through the semester without much change in the frequency of low ratings. We then use student interviews to develop a model for student engagement with peer assessment. This model is based on two competing influences which appear to shape peer evaluation behavior: a strong disinclination to give poor ratings with a complementary preference to give high ratings when in doubt, and an attempt to develop an expertlike criticality when assessing peers’ work.

Development and integration of a LabVIEW-based modular architecture for automated execution of electrochemical catalyst testing.

Science.gov (United States)

Topalov, Angel A; Katsounaros, Ioannis; Meier, Josef C; Klemm, Sebastian O; Mayrhofer, Karl J J

2011-11-01

This paper describes a system for performing electrochemical catalyst testing where all hardware components are controlled simultaneously using a single LabVIEW-based software application. The software that we developed can be operated in both manual mode for exploratory investigations and automatic mode for routine measurements, by using predefined execution procedures. The latter enables the execution of high-throughput or combinatorial investigations, which decrease substantially the time and cost for catalyst testing. The software was constructed using a modular architecture which simplifies the modification or extension of the system, depending on future needs. The system was tested by performing stability tests of commercial fuel cell electrocatalysts, and the advantages of the developed system are discussed. © 2011 American Institute of Physics

Evaluation of oral microbiology lab curriculum reform.

Science.gov (United States)

Nie, Min; Gao, Zhen Y; Wu, Xin Y; Jiang, Chen X; Du, Jia H

2015-12-07

According to the updated concept of oral microbiology, the School of Stomatology, Wuhan University, has carried out oral microbiology teaching reforms during the last 5 years. There was no lab curriculum before 2009 except for a theory course of oral microbiology. The school has implemented an innovative curriculum with oral medicine characteristics to strengthen understanding of knowledge, cultivate students' scientific interest and develop their potential, to cultivate the comprehensive ability of students. This study was designed to evaluate the oral microbiology lab curriculum by analyzing student performance and perceptions regarding the curriculum from 2009 to 2013. The lab curriculum adopted modalities for cooperative learning. Students collected dental plaque from each other and isolated the cariogenic bacteria with selective medium plates. Then they purified the enrichment culture medium and identified the cariogenic strains by Gram stain and biochemical tests. Both quantitative and qualitative data for 5 years were analysed in this study. Part One of the current study assessed student performance in the lab from 2009 to 2013. Part Two used qualitative means to assess students' perceptions by an open questionnaire. The 271 study students' grades on oral microbiology improved during the lab curriculum: "A" grades rose from 60.5 to 81.2 %, and "C" grades fell from 28.4 to 6.3 %. All students considered the lab curriculum to be interesting and helpful. Quantitative and qualitative data converge to suggest that the lab curriculum has strengthened students' grasp of important microbiology-related theory, cultivated their scientific interest, and developed their potential and comprehensive abilities. Our student performance and perception data support the continued use of the innovative teaching system. As an extension and complement of the theory course, the oral microbiology lab curriculum appears to improve the quality of oral medicine education and help to

Hands-On Open Access Broadband Wireless Technology Lab Mapping Course Outcomes to Lab Experiments

Directory of Open Access Journals (Sweden)

Yazan Alqudah

2012-10-01

Full Text Available The unprecedented growth in wireless communication is offering opportunities and challenges for educators. Thanks to technology advances and job opportunities, more and more students are interested in wireless communications courses. However, bridging the gap between classroom and real-world experience remains a challenge. Advanced undergraduate communications courses typically focus more on theory. Some courses are given online, and lack hands-on experiments. Driven by feedback from industry and students, we propose practical laboratory experiments that attempt to bridge the gap between classroom and real world. The laboratory exercises take advantage of the infrastructure of deployed wireless networks and allow students to measure, and analyze data, as well as to interact. The proposed labs can be used even in online courses. This paper describes the experiments proposed, the procedures and typical results. The experiments are tied to course objective.

Kedalion: NASA's Adaptable and Agile Hardware/Software Integration and Test Lab

Science.gov (United States)

Mangieri, Mark L.; Vice, Jason

2011-01-01

NASA fs Kedalion engineering analysis lab at Johnson Space Center is on the forefront of validating and using many contemporary avionics hardware/software development and integration techniques, which represent new paradigms to heritage NASA culture. Kedalion has validated many of the Orion hardware/software engineering techniques borrowed from the adjacent commercial aircraft avionics solution space, with the intention to build upon such techniques to better align with today fs aerospace market. Using agile techniques, commercial products, early rapid prototyping, in-house expertise and tools, and customer collaboration, Kedalion has demonstrated that cost effective contemporary paradigms hold the promise to serve future NASA endeavors within a diverse range of system domains. Kedalion provides a readily adaptable solution for medium/large scale integration projects. The Kedalion lab is currently serving as an in-line resource for the project and the Multipurpose Crew Vehicle (MPCV) program.

Kinematic Labs with Mobile Devices

Science.gov (United States)

Kinser, Jason M.

2015-07-01

This book provides 13 labs spanning the common topics in the first semester of university-level physics. Each lab is designed to use only the student's smartphone, laptop and items easily found in big-box stores or a hobby shop. Each lab contains theory, set-up instructions and basic analysis techniques. All of these labs can be performed outside of the traditional university lab setting and initial costs averaging less than 8 per student, per lab.

Risk Factors for Attempting Suicide in Prisoners

Science.gov (United States)

Sarchiapone, Marco; Carli, Vladimir; Di Giannantonio, Massimo; Roy, Alec

2009-01-01

We wished to examine determinants of suicidal behavior in prisoners. 903 male prisoners had a psychiatric interview which included various psychometric tests. Suicide attempters were compared with prisoners who had never attempted suicide. Significantly more of the attempters had a history of psychiatric disorder, substance abuse, a family history…

Teachers' Perspectives on Online Virtual Labs vs. Hands-On Labs in High School Science

Science.gov (United States)

Bohr, Teresa M.

This study of online science teachers' opinions addressed the use of virtual labs in online courses. A growing number of schools use virtual labs that must meet mandated laboratory standards to ensure they provide learning experiences comparable to hands-on labs, which are an integral part of science curricula. The purpose of this qualitative case study was to examine teachers' perceptions of the quality and effectiveness of high school virtual labs. The theoretical foundation was constructivism, as labs provide student-centered activities for problem solving, inquiry, and exploration of phenomena. The research questions focused on experienced teachers' perceptions of the quality of virtual vs. hands-on labs. Data were collected through survey questions derived from the lab objectives of The Next Generation Science Standards . Eighteen teachers rated the degree of importance of each objective and also rated how they felt virtual labs met these objectives; these ratings were reported using descriptive statistics. Responses to open-ended questions were few and served to illustrate the numerical results. Many teachers stated that virtual labs are valuable supplements but could not completely replace hands-on experiences. Studies on the quality and effectiveness of high school virtual labs are limited despite widespread use. Comprehensive studies will ensure that online students have equal access to quality labs. School districts need to define lab requirements, and colleges need to specify the lab experience they require. This study has potential to inspire positive social change by assisting science educators, including those in the local school district, in evaluating and selecting courseware designed to promote higher order thinking skills, real-world problem solving, and development of strong inquiry skills, thereby improving science instruction for all high school students.

Differences between Lab Completion and Non-Completion on Student Performance in an Online Undergraduate Environmental Science Program

Science.gov (United States)

Corsi, Gianluca

2011-12-01

Web-based technology has revolutionized the way education is delivered. Although the advantages of online learning appeal to large numbers of students, some concerns arise. One major concern in online science education is the value that participation in labs has on student performance. The purpose of this study was to assess the relationships between lab completion and student academic success as measured by test grades, scientific self-confidence, scientific skills, and concept mastery. A random sample of 114 volunteer undergraduate students, from an online Environmental Science program at the American Public University System, was tested. The study followed a quantitative, non-experimental research design. Paired sample t-tests were used for statistical comparison between pre-lab and post-lab test grades, two scientific skills quizzes, and two scientific self-confidence surveys administered at the beginning and at the end of the course. The results of the paired sample t-tests revealed statistically significant improvements on all post-lab test scores: Air Pollution lab, t(112) = 6.759, p virtual reality platforms and digital animations. Future research is encouraged to investigate possible correlations between socio-demographic attributes and academic success of students enrolled in online science programs in reference to lab completion.

Book Review: Professional Penetration Testing: Creating and Learning in a Hacking Lab 2E

Directory of Open Access Journals (Sweden)

Joshua Bartolomie

2013-09-01

Full Text Available Wilhelm, T. (2013. Professional Penetration Testing: Creating and Learning in a Hacking Lab 2E. Waltham, MA: Syngress, 464 pages, ISBN-10: 1597499935; ISBN-13: 978-1597499934, US$79.99Reviewed by Joshua Bartolomie, CISSP, CEECS, CFCE, DFCP, CRISC, CSMOrganizations often strive for proactive information security programs in an effort to limit occurrence and impact of security breaches. However, traditional security programs run the risk of being unable to provide adequate insight and proactive awareness into real attack vectors that may exist within their organizations. With attack methods and efforts becoming increasingly aggressive, and effective, organizations must take equally assertive measures to protect their critical information and assets. Penetration testing is one of those tools that is often misunderstood, overlooked, and undervalued. A true adversary would not hesitate to exploit every potential to gain entry or cause a disruption to their target.(see PDF for full review

OpenLabNotes

DEFF Research Database (Denmark)

List, Markus; Franz, Michael; Tan, Qihua

2015-01-01

be advantageous if an ELN was Integrated with a laboratory information management system to allow for a comprehensive documentation of experimental work including the location of samples that were used in a particular experiment. Here, we present OpenLabNotes, which adds state-of-the-art ELN capabilities to Open......LabFramework, a powerful and flexible laboratory information management system. In contrast to comparable solutions, it allows to protect the intellectual property of its users by offering data protection with digital signatures. OpenLabNotes effectively Closes the gap between research documentation and sample management......, thus making Open-Lab Framework more attractive for laboratories that seek to increase productivity through electronic data management....

A comparative study on real lab and simulation lab in communication engineering from students' perspectives

Science.gov (United States)

Balakrishnan, B.; Woods, P. C.

2013-05-01

Over the years, rapid development in computer technology has engendered simulation-based laboratory (lab) in addition to the traditional hands-on (physical) lab. Many higher education institutions adopt simulation lab, replacing some existing physical lab experiments. The creation of new systems for conducting engineering lab activities has raised concerns among educators on the merits and shortcomings of both physical and simulation labs; at the same time, many arguments have been raised on the differences of both labs. Investigating the effectiveness of both labs is complicated, as there are multiple factors that should be considered. In view of this challenge, a study on students' perspectives on their experience related to key aspects on engineering laboratory exercise was conducted. In this study, the Visual Auditory Read and Kinetic model was utilised to measure the students' cognitive styles. The investigation was done through a survey among participants from Multimedia University, Malaysia. The findings revealed that there are significant differences for most of the aspects in physical and simulation labs.

Virtual Reality Lab Assistant

Science.gov (United States)

Saha, Hrishikesh; Palmer, Timothy A.

1996-01-01

Virtual Reality Lab Assistant (VRLA) demonstration model is aligned for engineering and material science experiments to be performed by undergraduate and graduate students in the course as a pre-lab simulation experience. This will help students to get a preview of how to use the lab equipment and run experiments without using the lab hardware/software equipment. The quality of the time available for laboratory experiments can be significantly improved through the use of virtual reality technology.

Hydroscoop - Bulletin of the small-scale hydraulic laboratory MHyLab; Hydroscoop - Bulletin d'information MHyLab laboratoire de petite hydraulique

Energy Technology Data Exchange (ETDEWEB)

Denis, V.

2009-07-01

This is issue Nr. 5 of the news bulletin of MHyLab, the small-scale hydraulic laboratory in Montcherand, Switzerland. The history of MHyLab development is recalled. The objective of the laboratory is given: the laboratory development of efficient and reliable turbines for the entire small-scale hydraulic range (power: 10 to 2000 kW, flow rate: 0.01 to 10 m{sup 3}/s, hydraulic head: 1 m up to more than 700 m). The first period (1997-2001) was devoted to Pelton turbines for high heads (60 to 70 m) and the second (2001-2009) to Kaplan turbines for low and very low heads (1 to 30 m). In the third period (beginning 2008) diagonal turbines for medium heads (25 to 100 m) are being developed. MHyLab designed, modelled and tested all these different types. The small-scale hydraulic market developed unexpectedly quickly. The potential of small-scale hydraulics in the Canton of Vaud, western Switzerland is presented. Three implemented projects are reported on as examples for MHyLab activities on the market place. The MHyLab staff is presented.

An update on Lab Rover: A hospital material transporter

Science.gov (United States)

Mattaboni, Paul

1994-01-01

The development of a hospital material transporter, 'Lab Rover', is described. Conventional material transport now utilizes people power, push carts, pneumatic tubes and tracked vehicles. Hospitals are faced with enormous pressure to reduce operating costs. Cyberotics, Inc. developed an Autonomous Intelligent Vehicle (AIV). This battery operated service robot was designed specifically for health care institutions. Applications for the AIV include distribution of clinical lab samples, pharmacy drugs, administrative records, x-ray distribution, meal tray delivery, and certain emergency room applications. The first AIV was installed at Lahey Clinic in Burlington, Mass. Lab Rover was beta tested for one year and has been 'on line' for an additional 2 years.

Lab-scale hydrogen peroxide data from ECBC

Data.gov (United States)

U.S. Environmental Protection Agency — Data from small lab scale tests conducted at ECBC. It contains efficacy data as well as data on env conditions such as temperature, RH, and hydrogen peroxide vapor...

UTRaLab – Urban Traffic Research Laboratory

Directory of Open Access Journals (Sweden)

Karsten Kozempel

2017-08-01

Full Text Available The Urban Traffic Research Laboratory (UTRaLab is a research and test track for traffic detection methods and sensors. It is located at the Ernst-Ruska-Ufer, in the southeast of the city of Berlin (Germany. The UTRaLab covers 1 km of a highly-frequented urban road and is connected to a motorway. It is equipped with two gantries with distance of 850 m in between and has several outstations for data collection. The gantries contain many different traffic sensors like inductive loops, cameras, lasers or wireless sensors for traffic data acquisition. Additionally a weather station records environmental data. The UTRaLab’s main purposes are the data collection of traffic data on the one hand and testing newly developed sensors on the other hand.

LabVIEW Interface for PCI-SpaceWire Interface Card

Science.gov (United States)

Lux, James; Loya, Frank; Bachmann, Alex

2005-01-01

This software provides a LabView interface to the NT drivers for the PCISpaceWire card, which is a peripheral component interface (PCI) bus interface that conforms to the IEEE-1355/ SpaceWire standard. As SpaceWire grows in popularity, the ability to use SpaceWire links within LabVIEW will be important to electronic ground support equipment vendors. In addition, there is a need for a high-level LabVIEW interface to the low-level device- driver software supplied with the card. The LabVIEW virtual instrument (VI) provides graphical interfaces to support all (1) SpaceWire link functions, including message handling and routing; (2) monitoring as a passive tap using specialized hardware; and (3) low-level access to satellite mission-control subsystem functions. The software is supplied in a zip file that contains LabVIEW VI files, which provide various functions of the PCI-SpaceWire card, as well as higher-link-level functions. The VIs are suitably named according to the matching function names in the driver manual. A number of test programs also are provided to exercise various functions.

Large-scale laboratory testing of bedload-monitoring technologies: overview of the StreamLab06 Experiments

Science.gov (United States)

Marr, Jeffrey D.G.; Gray, John R.; Davis, Broderick E.; Ellis, Chris; Johnson, Sara; Gray, John R.; Laronne, Jonathan B.; Marr, Jeffrey D.G.

2010-01-01

A 3-month-long, large-scale flume experiment involving research and testing of selected conventional and surrogate bedload-monitoring technologies was conducted in the Main Channel at the St. Anthony Falls Laboratory under the auspices of the National Center for Earth-surface Dynamics. These experiments, dubbed StreamLab06, involved 25 researchers and volunteers from academia, government, and the private sector. The research channel was equipped with a sediment-recirculation system and a sediment-flux monitoring system that allowed continuous measurement of sediment flux in the flume and provided a data set by which samplers were evaluated. Selected bedload-measurement technologies were tested under a range of flow and sediment-transport conditions. The experiment was conducted in two phases. The bed material in phase I was well-sorted siliceous sand (0.6-1.8 mm median diameter). A gravel mixture (1-32 mm median diameter) composed the bed material in phase II. Four conventional bedload samplers – a standard Helley-Smith, Elwha, BLH-84, and Toutle River II (TR-2) sampler – were manually deployed as part of both experiment phases. Bedload traps were deployed in study Phase II. Two surrogate bedload samplers – stationarymounted down-looking 600 kHz and 1200 kHz acoustic Doppler current profilers – were deployed in experiment phase II. This paper presents an overview of the experiment including the specific data-collection technologies used and the ambient hydraulic, sediment-transport and environmental conditions measured as part of the experiment. All data collected as part of the StreamLab06 experiments are, or will be available to the research community.

Needsfinding and design of a Living lab in the built environment

NARCIS (Netherlands)

Savelkoul, L.E.M.; Peutz, M.

2017-01-01

Involvement of (end) users is essential in Living Labs. Testing assumptions by exhibiting these to users leads to new insights and often also to innovation. In this study, we show these phenomena by use of a Living Lab in a health care organization. We examine user involvement by researching their

Lab at Home: Hardware Kits for a Digital Design Lab

Science.gov (United States)

Oliver, J. P.; Haim, F.

2009-01-01

An innovative laboratory methodology for an introductory digital design course is presented. Instead of having traditional lab experiences, where students have to come to school classrooms, a "lab at home" concept is proposed. Students perform real experiments in their own homes, using hardware kits specially developed for this purpose. They…

Labs not in a lab: A case study of instructor and student perceptions of an online biology lab class

Science.gov (United States)

Doiron, Jessica Boyce

Distance learning is not a new phenomenon but with the advancement in technology, the different ways of delivering an education have increased. Today, many universities and colleges offer their students the option of taking courses online instead of sitting in a classroom on campus. In general students like online classes because they allow for flexibility, the comfort of sitting at home, and the potential to save money. Even though there are advantages to taking online classes, many students and instructors still debate the effectiveness and quality of education in a distant learning environment. Many universities and colleges are receiving pressure from students to offer more and more classes online. Research argues for both the advantages and disadvantages of online classes and stresses the importance of colleges and universities weighing both sides before deciding to adopt an online class. Certain classes may not be suitable for online instruction and not all instructors are suitable to teach online classes. The literature also reveals that there is a need for more research on online biology lab classes. With the lack of information on online biology labs needed by science educators who face the increasing demand for online biology labs, this case study hopes to provide insight into the use of online biology lab classes and the how students and an instructor at a community college in Virginia perceive their online biology lab experience as well as the effectiveness of the online labs.

Erroneous Memories Arising from Repeated Attempts to Remember

Science.gov (United States)

Henkel, Linda A.

2004-01-01

The impact of repeated and prolonged attempts at remembering on false memory rates was assessed in three experiments. Participants saw and imagined pictures and then made repeated recall attempts before taking a source memory test. Although the number of items recalled increased with repeated tests, the net gains were associated with more source…

ExoGeoLab Pilot Project for Landers, Rovers and Instruments

Science.gov (United States)

Foing, Bernard

2010-05-01

We have developed a pilot facility with a Robotic Test Bench (ExoGeoLab) and a Mobile Lab Habitat (ExoHab). They can be used to validate concepts and external instruments from partner institutes. The ExoGeoLab research incubator project, has started in the frame of a collaboration between ILEWG (International Lunar Exploration working Group http://sci.esa.int/ilewg), ESTEC, NASA and academic partners, supported by a design and control desk in the European Space Incubator (ESI), as well as infrastructure. ExoGeoLab includes a sequence of technology and research pilot project activities: - Data analysis and interpretation of remote sensing and in-situ data, and merging of multi-scale data sets - Procurement and integration of geophysical, geo-chemical and astrobiological breadboard instruments on a surface station and rovers - Integration of cameras, environment and solar sensors, Visible and near IR spectrometer, Raman spectrometer, sample handling, cooperative rovers - Delivery of a generic small planetary lander demonstrator (ExoGeoLab lander, Sept 2009) as a platform for multi-instruments tests - Research operations and exploitation of ExoGeoLab test bench for various conceptual configurations, and support for definition and design of science surface packages (Moon, Mars, NEOs, outer moons) - Field tests of lander, rovers and instruments in analogue sites (Utah MDRS 2009 & 2010, Eifel volcanic park in Sept 2009, and future campaigns). Co-authors, ILEWG ExoGeoLab & ExoHab Team: B.H. Foing(1,11)*#, C. Stoker(2,11)*, P. Ehrenfreund(10,11), L. Boche-Sauvan(1,11)*, L. Wendt(8)*, C. Gross(8, 11)*, C. Thiel(9)*, S. Peters(1,6)*, A. Borst(1,6)*, J. Zavaleta(2)*, P. Sarrazin(2)*, D. Blake(2), J. Page(1,4,11), V. Pletser(5,11)*, E. Monaghan(1)*, P. Mahapatra(1)#, A. Noroozi(3), P. Giannopoulos(1,11) , A. Calzada(1,6,11), R. Walker(7), T. Zegers(1, 15) #, G. Groemer(12)# , W. Stumptner(12)#, B. Foing(2,5), J. K. Blom(3)#, A. Perrin(14)#, M. Mikolajczak(14)#, S. Chevrier(14

Factors related to attempted suicide in Davanagere

Directory of Open Access Journals (Sweden)

Nagendra Gouda M

2008-01-01

Full Text Available Research Question: What are the factors responsible for suicidal attempts? Objectives: To study the socio-demographic factors, methods and reasons for suicidal attempts. Type of Study: Cross-sectional study. Setting: Bapuji and C.G. Hospitals attached to J.J.M. Medical College, Davanagere. Participants: A total of 540 suicidal attempters admitted to emergency wards. Methodology: A pretested proforma was administered to the subjects relating the factors responsible for the attempt. The data thus obtained was compiled and analyzed. Statistical Analysis: Proportions, Z -test and Chi-square test. Results: In this study, 61.3% were males and 38.7% were females. Peak occurrence of suicidal attempts was found in the second and third decades (15-29 years. Hindus constituted about 94.6% of the total suicidal attempters. Almost half (52.2% of the subjects had education below or up to matriculation and 83% of them were from the lower (classes IV and V socio-economic groups. Agriculturists, housewives and unskilled workers represented 75% of the total subjects. Fifty-five percent of the subjects were from nuclear families and most (62.4% of them were married; frequent mode of attempting suicides was by organo-phosphorus compounds (66.3% followed by overdosage of tablets (17.8%. Common cause was family problem (27.2% followed by illness (27%.

MatLab Script and Functional Programming

Science.gov (United States)

Shaykhian, Gholam Ali

2007-01-01

MatLab Script and Functional Programming: MatLab is one of the most widely used very high level programming languages for scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. The MatLab seminar covers the functional and script programming aspect of MatLab language. Specific expectations are: a) Recognize MatLab commands, script and function. b) Create, and run a MatLab function. c) Read, recognize, and describe MatLab syntax. d) Recognize decisions, loops and matrix operators. e) Evaluate scope among multiple files, and multiple functions within a file. f) Declare, define and use scalar variables, vectors and matrices.

Status of Cryogenic System for Spallation Neutron Source's Superconducting Radiofrequency Test Facility at Oak Ridge National Lab

International Nuclear Information System (INIS)

Xu, Ting; Casagrande, Fabio; Ganni, Venkatarao; Knudsen, Peter N.; Strong, William Herb

2011-01-01

Spallation Neutron Source (SNS) at Oak Ridge National Lab (ORNL) is building an independent cryogenic system for its Superconducting Radiofrequency Test Facility (SRFTF). The scope of the system is to support the SNS cryomodule test and cavity test at 2-K (using vacuum pump) and 4.5K for the maintenance purpose and Power Upgrade Project of SNS, and to provide the part of the cooling power needed to backup the current CHL to keep Linac at 4.5-K during CHL maintenance period in the future. The system is constructed in multiple phases. The first phase is to construct an independent 4K helium refrigeration system with helium Dewar and distribution box as load interface. It is schedule to be commissioned in 2013. Here we report the concept design of the system and the status of the first phase of this project.

Exploring linear algebra labs and projects with Mathematica

CERN Document Server

Arangala, Crista

2014-01-01

Matrix Operations Lab 0: An Introduction to Mathematica Lab 1: Matrix Basics and Operations Lab 2: A Matrix Representation of Linear Systems Lab 3: Powers, Inverses, and Special Matrices Lab 4: Graph Theory and Adjacency Matrices Lab 5: Permutations and Determinants Lab 6: 4 x 4 Determinants and Beyond Project Set 1 Invertibility Lab 7: Singular or Nonsingular? Why Singularity Matters Lab 8: Mod It Out, Matrices with Entries in ZpLab 9: It's a Complex World Lab 10: Declaring Independence: Is It Linear? Project Set 2 Vector Spaces Lab 11: Vector Spaces and SubspacesLab 12: Basing It All on Just a Few Vectors Lab 13: Linear Transformations Lab 14: Eigenvalues and Eigenspaces Lab 15: Markov Chains, An Application of Eigenvalues Project Set 3 Orthogonality Lab 16: Inner Product Spaces Lab 17: The Geometry of Vector and Inner Product SpacesLab 18: Orthogonal Matrices, QR Decomposition, and Least Squares Regression Lab 19: Symmetric Matrices and Quadratic Forms Project Set 4 Matrix Decomposition with Applications L...

Are Statistics Labs Worth the Effort?--Comparison of Introductory Statistics Courses Using Different Teaching Methods

Directory of Open Access Journals (Sweden)

Jose H. Guardiola

2010-01-01

Full Text Available This paper compares the academic performance of students in three similar elementary statistics courses taught by the same instructor, but with the lab component differing among the three. One course is traditionally taught without a lab component; the second with a lab component using scenarios and an extensive use of technology, but without explicit coordination between lab and lecture; and the third using a lab component with an extensive use of technology that carefully coordinates the lab with the lecture. Extensive use of technology means, in this context, using Minitab software in the lab section, doing homework and quizzes using MyMathlab ©, and emphasizing interpretation of computer output during lectures. Initially, an online instrument based on Gardner’s multiple intelligences theory, is given to students to try to identify students’ learning styles and intelligence types as covariates. An analysis of covariance is performed in order to compare differences in achievement. In this study there is no attempt to measure difference in student performance across the different treatments. The purpose of this study is to find indications of associations among variables that support the claim that statistics labs could be associated with superior academic achievement in one of these three instructional environments. Also, this study tries to identify individual student characteristics that could be associated with superior academic performance. This study did not find evidence of any individual student characteristics that could be associated with superior achievement. The response variable was computed as percentage of correct answers for the three exams during the semester added together. The results of this study indicate a significant difference across these three different instructional methods, showing significantly higher mean scores for the response variable on students taking the lab component that was carefully coordinated with

Lab and Imaging Tests

Science.gov (United States)

... tests to help detect (diagnose) a blood cancer (leukemia, lymphoma, myeloma, myelodysplastic syndromes or myeloproliferative disease). You may need to undergo additional tests to confirm your diagnosis. Once your diagnosis is confirmed, your doctor may ...

Improving the Quality of Lab Reports by Using Them as Lab Instructions

Science.gov (United States)

Haagen-Schuetzenhoefer, Claudia

2012-10-01

Lab exercises are quite popular in teaching science. Teachers have numerous goals in mind when teaching science laboratories. Nevertheless, empirical research draws a heterogeneous picture of the benefits of lab work. Research has shown that it does not necessarily contribute to the enhancement of practical abilities or content knowledge. Lab activities are frequently based on recipe-like, step-by-step instructions ("cookbook style"), which do not motivate students to engage cognitively. Consequently, students put the emphasis on "task completion" or "manipulating equipment."2

Attempts to improve nitrogen utilization efficiency of aquaponics through nitrifies addition and filler gradation.

Science.gov (United States)

Zou, Yina; Hu, Zhen; Zhang, Jian; Xie, Huijun; Liang, Shuang; Wang, Jinhe; Yan, Runxin

2016-04-01

Aquaponics has attracted worldwide attention in recent years and is considered as an alternative technology for conventional aquaculture. In this study, common carp (Cyprinus carpio) and pakchoi (Brassica chinensis) were cultured in lab-scale aquaponics, and attempts were conducted to enhance its nitrogen utilization efficiency (NUE) through two optimization methods, i.e., nitrifies addition (NA) and filler gradation (FG). Results showed that NA and FG could improve the NUE of aquaponics by 8.8 and 16.0%, respectively, compared with control. The total ammonia (TAN) and nitrite (NO2(-)) concentrations in NA and FG systems were maintained at relatively low level (TAN aquaponics also contributed to global warming. Although the two proposed attempts in this study caused more N2O emission, they made new breakthrough in improving the NUE of aquaponics.

Hemoglobin Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/hemoglobintest.html Hemoglobin Test To use the sharing features on this page, please enable JavaScript. What is a Hemoglobin Test? A hemoglobin test measures the levels of hemoglobin ...

Amylase Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/amylasetest.html Amylase Test To use the sharing features on this page, please enable JavaScript. What is an Amylase Test? An amylase test measures the amount of amylase ...

Hematocrit Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/hematocrittest.html Hematocrit Test To use the sharing features on this page, please enable JavaScript. What is a Hematocrit Test? A hematocrit test is a type of blood ...

Procalcitonin Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/procalcitonintest.html Procalcitonin Test To use the sharing features on this page, please enable JavaScript. What is a Procalcitonin Test? A procalcitonin test measures the level of procalcitonin ...

Dr. Monaco Examines Lab-on a-Chip

Science.gov (United States)

2003-01-01

Dr. Lisa Monaco, Marshall Space Flight Center's (MSFC's) project scientist for the Lab-on-a-Chip Applications Development (LOCAD) program, examines a lab on a chip. The small dots are actually ports where fluids and chemicals can be mixed or samples can be collected for testing. Tiny channels, only clearly visible under a microscope, form pathways between the ports. Many chemical and biological processes, previously conducted on large pieces of laboratory equipment, can now be performed on these small glass or plastic plates. Monaco and other researchers at MSFC in Huntsville, Alabama, are customizing the chips to be used for many space applications, such as monitoring microbes inside spacecraft and detecting life on other planets. The portable, handheld Lab-on-a Chip Application Development Portable Test System (LOCAD-PTS) made its debut flight aboard Discovery during the STS-116 mission launched December 9, 2006. The system allowed crew members to monitor their environment for problematic contaminants such as yeast, mold, and even E.coli, and salmonella. Once LOCAD-PTS reached the International Space Station (ISS), the Marshall team continued to manage the experiment, monitoring the study from a console in the Payload Operations Center at MSFC. The results of these studies will help NASA researchers refine the technology for future Moon and Mars missions. (NASA/MSFC/D.Stoffer)

Reforming Cookbook Labs

Science.gov (United States)

Peters, Erin

2005-01-01

Deconstructing cookbook labs to require the students to be more thoughtful could break down perceived teacher barriers to inquiry learning. Simple steps that remove or disrupt the direct transfer of step-by-step procedures in cookbook labs make students think more critically about their process. Through trials in the author's middle school…

The Portuguese Contribution for lab2go - pt.lab2go

Directory of Open Access Journals (Sweden)

Maria Teresa Restivo

2013-01-01

Full Text Available Online experimentation provides innovative and valuable tools for use in academy, in high schools, in industry and in medical areas. It has also become a precious tool for educational and training purposes in any of those areas. Looking at online experimentation as a pure distance learning tool it represents a very efficient way of sharing hands-on capabilities, for example with developing countries. In Portugal a new consortium of online experimentation was created for fostering the national potential, using the Portuguese version of lab2go web platform, pt.lab2go. The authors pretend to demonstrate some of capabilities of the consortium in sharing online labs.

Size effect of added LaB6 particles on optical properties of LaB6/Polymer composites

International Nuclear Information System (INIS)

Yuan Yifei; Zhang Lin; Hu Lijie; Wang Wei; Min Guanghui

2011-01-01

Modified LaB 6 particles with sizes ranging from 50 nm to 400 nm were added into polymethyl methacrylate (PMMA) matrix in order to investigate the effect of added LaB 6 particles on optical properties of LaB 6 /PMMA composites. Method of in-situ polymerization was applied to prepare PMMA from raw material—methyl methacrylate (MMA), a process during which LaB 6 particles were dispersed in MMA. Ultraviolet–visible–near infrared (UV–vis–NIR) absorption spectrum was used to study optical properties of the as-prepared materials. The difference in particle size could apparently affect the composites' absorption of visible light around wavelength of 600 nm. Added LaB 6 particles with size of about 70 nm resulted in the best optical properties among these groups of composites. - Graphical abstract: 70 nm LaB 6 particles resulted in the best performance on absorption of VIS and NIR, which could not be apparently achieved by LaB 6 particles beyond nano-scale. Highlights: ► LaB 6 /PMMA composites were prepared using the method of in-situ polymerization. ► LaB 6 particles added in MMA prolonged the time needed for its pre-polymerization. ► Nanosized LaB 6 particles could obviously absorb much NIR but little VIS.

Users' performance in lab and non-lab environments through online usability testing:A case of evaluating the usability of digital academic libraries' websites

OpenAIRE

Alharbi, Abeer; Mayhew, Pam

2015-01-01

The factors related to the environment in which users operate may be of a vital importance when trying to understand how they experience a particular system. It is required that we find out how we can get to know those factors to investigate if they affect the users' performance in usability testing. An online usability study has emerged that can be attempted by a large, varied pool of users' anywhere with an Internet connection. Would the usage of an online usability study help to give compr...

Arduino: a low-cost multipurpose lab equipment.

Science.gov (United States)

D'Ausilio, Alessandro

2012-06-01

Typical experiments in psychological and neurophysiological settings often require the accurate control of multiple input and output signals. These signals are often generated or recorded via computer software and/or external dedicated hardware. Dedicated hardware is usually very expensive and requires additional software to control its behavior. In the present article, I present some accuracy tests on a low-cost and open-source I/O board (Arduino family) that may be useful in many lab environments. One of the strengths of Arduinos is the possibility they afford to load the experimental script on the board's memory and let it run without interfacing with computers or external software, thus granting complete independence, portability, and accuracy. Furthermore, a large community has arisen around the Arduino idea and offers many hardware add-ons and hundreds of free scripts for different projects. Accuracy tests show that Arduino boards may be an inexpensive tool for many psychological and neurophysiological labs.

RF Tests of an 805 MHz Pillbox Cavity at Lab G of Fermilab

International Nuclear Information System (INIS)

D. Li; J. Corlett; R. MacGill; M. Zisman; J. Norem; A. Moretti; Z. Qian; J. Wallig; V. Wu; Y. Torun; R.A. Rimmer

2003-01-01

We report recent high power RF tests on an 805 MHz RF pillbox cavity with demountable windows over beam apertures at Lab G of Fermilab, a dedicated facility for testing of MUCOOL (muon cooling) components. The cavity is installed inside a superconducting solenoidal magnet. A 12 MW peak RF power klystron is used for the tests. The cavity has been processed both with and without magnetic field. Without magnetic field, a gradient of 34 MV/m was reached rather quickly with very low sparking rate. In a 2.5 T solenoidal field, a 16 MV/m gradient was achieved, following several weeks of conditioning. Strong multipacting effects associated with high radiation levels were measured during processing with the magnetic field. More recently Be windows with TiN-coated surface have been installed and tested with and without the external magnetic field. 16 MV/m gradient without magnetic field was reached quickly as planned. Less multipacting was observed during the conditioning, indicating that the TiN-coated surface on the windows had indeed helped to reduce the secondary electron emission significantly. A gradient of 16.5 MV/m was finally achieved with magnet on in solenoidal mode and the field up to 4 T. Preliminary inspection of the Be window surface found no visual damage, in comparison with Cu windows where substantial surface damage was found. Preliminary understanding of conditioning the cavity in a strong magnetic field has been developed. More thorough window and cavity surface inspection is under way

RF tests of an 805 MHz pillbox cavity at Lab G of Fermilab

International Nuclear Information System (INIS)

Li, Derun; Corlett, J.; MacGill, R.; Wallig, J.; Zisman, M.; Moretti, A.; Qian, Z.; Wu, V.; Rimmer, R.; Norem, J.; Torun, Y.

2003-01-01

We report recent high power RF tests on an 805 MHz RF pillbox cavity with demountable windows for beam apertures at Lab G of Fermilab, a dedicated facility for testing of MUCOOL (muon cooling) components. The cavity is installed inside a superconducting solenoidal magnet. A 12 MW peak RF power klystron is used for the tests. The cavity has been processed both with and without magnetic field. Without magnetic field, a gradient of 34 MV/m was reached rather quickly with very low sparking rate. In a 2.5 T solenoidal field, a 16 MV/m gradient was achieved, and it had to take many weeks of conditioning. Strong multipacting effects associated with high radiation levels were measured during the processing with the magnetic field. More recently Be windows with TiN-coated surface have been installed and tested at conditions of with and without the external magnetic field. A conservative 16 MV/m gradient without magnetic field was reached quickly as planned. Less multipacting was observed during the conditioning, it indicated that the TiN-coated surface on the windows had indeed helped to reduce the secondary electron emissions significantly. A modest gradient of 16.5 MV/m was finally achieved with magnet on in solenoidal mode and the field up to 4 T. Preliminary inspection on Be windows surface found no damage at all, in comparison with Cu windows where substantial surface damage was found. Preliminary understanding of conditioning cavity in a strong magnetic field has been developed. More through window and cavity surface inspection is under way

Efektivitas virtual lab berbasis STEM dalam meningkatkan literasi sains siswa dengan perbedaan gender

Directory of Open Access Journals (Sweden)

Ismail Ismail

2016-10-01

This study aimed to know theeffectiveness of STEM-based virtual lab in improving the scientific literacy of students by gender differences.The design of this research one group pretest-posttest consisting of class 7B by the number of students 29 women and 7D class by the number of students 30 men.The data Ade collected through questionnaires, observations, and tests. The effectiveness of STEM-based virtual lab was analyzed through Independent-samples t test then calculated the value of effect size. the results showed that there are differences the resulting increase inscientific literacy class students women (7B of 0.46 and a class of men (7D of 0.29 with both of them in the medium category.The value of effect size using STEM-based virtual lab on the science content domain and competencies of 0.39 with the moderate category and attitude domain of 0.75 to a high category. Keywords: virtual lab, STEM, Scientific literacy, gender

Revisiting lab-on-a-chip technology for drug discovery.

Science.gov (United States)

Neuži, Pavel; Giselbrecht, Stefan; Länge, Kerstin; Huang, Tony Jun; Manz, Andreas

2012-08-01

The field of microfluidics or lab-on-a-chip technology aims to improve and extend the possibilities of bioassays, cell biology and biomedical research based on the idea of miniaturization. Microfluidic systems allow more accurate modelling of physiological situations for both fundamental research and drug development, and enable systematic high-volume testing for various aspects of drug discovery. Microfluidic systems are in development that not only model biological environments but also physically mimic biological tissues and organs; such 'organs on a chip' could have an important role in expediting early stages of drug discovery and help reduce reliance on animal testing. This Review highlights the latest lab-on-a-chip technologies for drug discovery and discusses the potential for future developments in this field.

Hamamatsu C11204-01 calibration, test and design of a dedicated LabVIEW interface

International Nuclear Information System (INIS)

Nocerino, E.; Barbato, F.C.T.; De Asmundis, R.

2017-01-01

In the last 50 years solid state devices have been widely used as radiation detectors (photons, betas, fast electrons and heavy ions) thanks to the advantages they offer with respect to photomultiplier tubes technology. However, despite their benefits (low power consumption, small size, low costs), semiconductors are very sensitive to temperature variations. This means that for those experiments using solid state detectors without any thermal control, the correct operation of the detectors is affected by the environmental condition. To solve this problem Hamamatsu Photonics realized the C11204-01 device: a special voltage supply module for silicon photomultipliers which compensates the overvoltage at different temperatures. In the following work we present the results of the calibration of this device and a test we performed on a silicon photomultiplier, by means of a LabVIEW"T"M interface designed ad hoc for this purpose.

Remote Lab for Robotics Applications

Directory of Open Access Journals (Sweden)

Robinson Jiménez

2018-01-01

Full Text Available This article describes the development of a remote lab environment used to test and training sessions for robotics tasks. This environment is made up of the components and devices based on two robotic arms, a network link, Arduino card and Arduino shield for Ethernet, as well as an IP camera. The remote laboratory is implemented to perform remote control of the robotic arms with visual feedback by camera, of the robots actions, where, with a group of test users, it was possible to obtain performance ranges in tasks of telecontrol of up to 92%.

TELECOM LAB

CERN Multimedia

IT-CS-TEL Section

2001-01-01

The Telecom Lab is moving from Building 104 to Building 31 S-026, with its entrance via the ramp on the side facing Restaurant n°2. The help desk will thus be closed to users on Tuesday 8 May. On May 9, the Lab will only be able to deal with problems of a technical nature at the new address and it will not be able to process any new subscription requests throughout the week from 7 to 11 May. We apologise for any inconvenience this may cause and thank you for your understanding.

Customer Avionics Interface Development and Analysis (CAIDA) Lab DEWESoft Display Creation

Science.gov (United States)

Coffey, Connor

2015-01-01

The Customer Avionics Interface Development and Analysis (CAIDA) Lab supports the testing of the Launch Control System (LCS), NASA's command and control system for the Space Launch System (SLS), Orion Multi-Purpose Crew Vehicle (MPCV), and ground support equipment. The objectives of the year-long internship were to support day-to-day operations of the CAIDA Lab, create prelaunch and tracking displays for Orion's Exploration Flight Test 1 (EFT-1), and create a program to automate the creation of displays for SLS and MPCV to be used by CAIDA and the Record and Playback Subsystem (RPS).

Living labs design and assessment of sustainable living

CERN Document Server

Guerra-Santin, Olivia; Lockton, Dan

2017-01-01

This book presents the results of a multi-annual project with sustainable Living Labs in the United Kingdom, Sweden, Germany and the Netherlands. Living Labs – as initiated by the authors – have proved to be very promising research, design, co-creation and communication facilities for the development and implementation of sustainable innovations in the home. The book provides an inspiring introduction to both the methodology and business modelling for the Living Lab facilities. Understanding daily living at home is key to designing products and services that support households in their transition to more sustainable lifestyles. This book not only explores new ways of gaining insights into daily practices, but also discusses developing and testing design methods to create sustainable solutions for households. These new methods and tools are needed because those available are either ineffective or cause rebound-effects. Intended for researchers and designers with an interest in the transition to sustainable...

Lab-on a-Chip

Science.gov (United States)

1999-01-01

Labs on chips are manufactured in many shapes and sizes and can be used for numerous applications, from medical tests to water quality monitoring to detecting the signatures of life on other planets. The eight holes on this chip are actually ports that can be filled with fluids or chemicals. Tiny valves control the chemical processes by mixing fluids that move in the tiny channels that look like lines, connecting the ports. Scientists at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama designed this chip to grow biological crystals on the International Space Station (ISS). Through this research, they discovered that this technology is ideally suited for solving the challenges of the Vision for Space Exploration. For example, thousands of chips the size of dimes could be loaded on a Martian rover looking for biosignatures of past or present life. Other types of chips could be placed in handheld devices used to monitor microbes in water or to quickly conduct medical tests on astronauts. The portable, handheld Lab-on-a Chip Application Development Portable Test System (LOCAD-PTS) made its debut flight aboard Discovery during the STS-116 mission launched December 9, 2006. The system allowed crew members to monitor their environment for problematic contaminants such as yeast, mold, and even E.coli, and salmonella. Once LOCAD-PTS reached the ISS, the Marshall team continued to manage the experiment, monitoring the study from a console in the Payload Operations Center at MSFC. The results of these studies will help NASA researchers refine the technology for future Moon and Mars missions. (NASA/MSFC/D.Stoffer)

Shame-proneness in attempted suicide patients

Directory of Open Access Journals (Sweden)

Wiklander Maria

2012-05-01

Full Text Available Abstract Background It has been suggested that shame may be an important feature in suicidal behaviors. The disposition to react with shame, “shame-proneness”, has previously not been investigated in groups of attempted suicide patients. We examined shame-proneness in two groups of attempted suicide patients, one group of non-suicidal patients and one group of healthy controls. We hypothesized that the attempted suicide patients would be more shame-prone than non-suicidal patients and healthy controls. Methods The Test of Self-Conscious Affect (TOSCA, which is the most used measure of shame-proneness, was completed by attempted suicide patients (n = 175: 105 women and 3 men with borderline personality disorder [BPD], 45 women and 22 men without BPD, non-suicidal psychiatric patients (n = 162, and healthy controls (n = 161. The participants were convenience samples, with patients from three clinical research projects and healthy controls from a fourth research project. The relationship between shame-proneness and attempted suicide was studied with group comparisons and multiple regressions. Men and women were analyzed separately. Results Women were generally more shame-prone than men of the same participant group. Female suicide attempters with BPD were significantly more shame-prone than both female suicide attempters without BPD and female non-suicidal patients and controls. Male suicide attempters without BPD were significantly less shame-prone than non-suicidal male patients. In multiple regressions, shame-proneness was predicted by level of depression and BPD (but not by attempted suicide in female patients, and level of depression and non-suicidality in male patients. Conclusions Contrary to our hypothesis and related previous research, there was no general relationship between shame-proneness and attempted suicide. Shame-proneness was differentially related to attempted suicide in different groups of suicide attempters

AST Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/asttest.html AST Test To use the sharing features on this page, please enable JavaScript. What is an AST Test? AST (aspartate aminotransferase) is an enzyme that is ...

Chlamydia Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/chlamydiatest.html Chlamydia Test To use the sharing features on this page, please enable JavaScript. What is a Chlamydia Test? Chlamydia is one of the most common sexually ...

Lipase Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/lipasetest.html Lipase Test To use the sharing features on this page, please enable JavaScript. What is a lipase test? Lipase is a type of protein made by ...

Cortisol Test: MedlinePlus Lab Test Information

Science.gov (United States)

... page: https://medlineplus.gov/labtests/cortisoltest.html Cortisol Test To use the sharing features on this page, please enable JavaScript. What is a Cortisol Test? Cortisol is a hormone that affects almost every ...

Payments to the Lab

Science.gov (United States)

Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management the Lab Make payments for event registrations, sponsorships, insurance, travel, other fees. Contact Treasury Team (505) 667-4090 Email If you need to make a payment to the Lab for an event registration

Off to the (Earthworm) Races: A Quick and Flexible Lab Experiment for Introductory Zoology Courses.

Science.gov (United States)

Switzer, Paul V.; Fritz, Ann H.

2001-01-01

Presents a hands-on, investigative lab activity for use in an introductory zoology course. Tests the behavioral hypothesis that substrate texture affects earthworm locomotor ability. Provides background information on earthworm locomotion followed by details of the lab exercise. (NB)

Analysis of the Qualification-Tests Performance of the Superconducting Cavities for the SNS Linac

CERN Document Server

Delayen, J R; Ozelis, O

2004-01-01

Thomas Jefferson National Accelerating Facility (Jefferson Lab) is producing superconducting radio frequency (SRF) cryomodules for the Spallation Neutron Source (SNS) cold linac. This consists of 11 medium-beta (β=0.61) cyomodules of 3 cavities each, and 12 high-beta (β=0.81) cryomodules of 4 cavities each. Before assembly into cavity strings the cavities undergo individual qualification tests in a vertical cryostat (VTA). In this paper we analyze the performance of the cavities during these qualification tests, and attempt to correlate this performance with cleaning, assembly, and testing procedures. We also compare VTA performance with performance in completed cryomodules.

Design of digital trapezoidal shaping filter based on LabVIEW

International Nuclear Information System (INIS)

Liu Yujuan; Qin Guoxiu; Yang Zhihui; Zhang Xiaodong

2013-01-01

It describes the design of a digital trapezoidal shaping filter to nuclear signals based on LabVIEW. A method of optimizing the trapezoidal shaping filter's parameters was presented and tested, and the test results of the effect of shaping filter algorithm were studied. (authors)

ScalaLab and GroovyLab: Comparing Scala and Groovy for Scientific Computing

Directory of Open Access Journals (Sweden)

Stergios Papadimitriou

2015-01-01

Full Text Available ScalaLab and GroovyLab are both MATLAB-like environments for the Java Virtual Machine. ScalaLab is based on the Scala programming language and GroovyLab is based on the Groovy programming language. They present similar user interfaces and functionality to the user. They also share the same set of Java scientific libraries and of native code libraries. From the programmer's point of view though, they have significant differences. This paper compares some aspects of the two environments and highlights some of the strengths and weaknesses of Scala versus Groovy for scientific computing. The discussion also examines some aspects of the dilemma of using dynamic typing versus static typing for scientific programming. The performance of the Java platform is continuously improved at a fast pace. Today Java can effectively support demanding high-performance computing and scales well on multicore platforms. Thus, both systems can challenge the performance of the traditional C/C++/Fortran scientific code with an easier to use and more productive programming environment.

CDC Lab Values

Centers for Disease Control (CDC) Podcasts

More than fifteen hundred scientists fill the lab benches at CDC, logging more than four million hours each year. CDC’s laboratories play a critical role in the agency’s ability to find, stop, and prevent disease outbreaks. This podcast provides a brief overview of what goes on inside CDC’s labs, and why this work makes a difference in American’s health.

Tele-Lab IT-Security: an Architecture for an online virtual IT Security Lab

Directory of Open Access Journals (Sweden)

Christoph Meinel

2008-05-01

Full Text Available Recently, Awareness Creation in terms of IT security has become a big thing – not only for enterprises. Campaigns for pupils try to highlight the importance of IT security even in the user’s early years. Common practices in security education – as seen in computer science courses at universities – mainly consist of literature and lecturing. In the best case, the teaching facility offers practical courses in a dedicated isolated computer lab. Additionally, there are some more or less interactive e-learning applications around. Most existing offers can do nothing more than impart theoretical knowledge or basic information. They all lack of possibilities to provide practical experience with security software or even hacker tools in a realistic environment. The only exceptions are the expensive and hard-to-maintain dedicated computer security labs. Those can only be provided by very few organizations. Tele-Lab IT-Security was designed to offer hands-on experience exercises in IT security without the need of additional hardware or maintenance expenses. The existing implementation of Tele-Lab even provides access to the learning environment over the Internet – and thus can be used anytime and anywhere. The present paper describes the extended architecture on which the current version of the Tele-Lab server is built.

Guidelines for Urban Labs

DEFF Research Database (Denmark)

Scholl, Christian; Agger Eriksen, Mette; Baerten, Nik

2017-01-01

urban lab initiatives from five different European cities: Antwerp (B), Graz and Leoben (A), Maastricht (NL) and Malmö (S). We do not pretend that these guidelines touch upon all possible challenges an urban lab may be confronted with, but we have incorporated all those we encountered in our...

Two Bayesian tests of the GLOMOsys Model.

Science.gov (United States)

Field, Sarahanne M; Wagenmakers, Eric-Jan; Newell, Ben R; Zeelenberg, René; van Ravenzwaaij, Don

2016-12-01

Priming is arguably one of the key phenomena in contemporary social psychology. Recent retractions and failed replication attempts have led to a division in the field between proponents and skeptics and have reinforced the importance of confirming certain priming effects through replication. In this study, we describe the results of 2 preregistered replication attempts of 1 experiment by Förster and Denzler (2012). In both experiments, participants first processed letters either globally or locally, then were tested using a typicality rating task. Bayes factor hypothesis tests were conducted for both experiments: Experiment 1 (N = 100) yielded an indecisive Bayes factor of 1.38, indicating that the in-lab data are 1.38 times more likely to have occurred under the null hypothesis than under the alternative. Experiment 2 (N = 908) yielded a Bayes factor of 10.84, indicating strong support for the null hypothesis that global priming does not affect participants' mean typicality ratings. The failure to replicate this priming effect challenges existing support for the GLOMO sys model. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Suicide Attempt in a Recently Diagnosed HIV Positive Subject: Is ...

African Journals Online (AJOL)

Suicide Attempt in a Recently Diagnosed HIV Positive Subject: Is Pre and Post Counseling Still Being Adequately Practiced? ... A case of attempted suicide in a recently diagnosed HIV positive subject without adequate counseling is reported. Subject ... Key Words: Suicide Attempt, HIV/AIDS, Pre and Post test Counseling.

GeneLab: A Systems Biology Platform for Spaceflight Omics Data

Science.gov (United States)

Reinsch, Sigrid S.; Lai, San-Huei; Chen, Rick; Thompson, Terri; Berrios, Daniel; Fogle, Homer; Marcu, Oana; Timucin, Linda; Chakravarty, Kaushik; Coughlan, Joseph

2015-01-01

NASA's mission includes expanding our understanding of biological systems to improve life on Earth and to enable long-duration human exploration of space. Resources to support large numbers of spaceflight investigations are limited. NASA's GeneLab project is maximizing the science output from these experiments by: (1) developing a unique public bioinformatics database that includes space bioscience relevant "omics" data (genomics, transcriptomics, proteomics, and metabolomics) and experimental metadata; (2) partnering with NASA-funded flight experiments through bio-sample sharing or sample augmentation to expedite omics data input to the GeneLab database; and (3) developing community-driven reference flight experiments. The first database, GeneLab Data System Version 1.0, went online in April 2015. V1.0 contains numerous flight datasets and has search and download capabilities. Version 2.0 will be released in 2016 and will link to analytic tools. In 2015 Genelab partnered with two Biological Research in Canisters experiments (BBRIC-19 and BRIC-20) which examine responses of Arabidopsis thaliana to spaceflight. GeneLab also partnered with Rodent Research-1 (RR1), the maiden flight to test the newly developed rodent habitat. GeneLab developed protocols for maxiumum yield of RNA, DNA and protein from precious RR-1 tissues harvested and preserved during the SpaceX-4 mission, as well as from tissues from mice that were frozen intact during spaceflight and later dissected. GeneLab is establishing partnerships with at least three planned flights for 2016. Organism-specific nationwide Science Definition Teams (SDTs) will define future GeneLab dedicated missions and ensure the broader scientific impact of the GeneLab missions. GeneLab ensures prompt release and open access to all high-throughput omics data from spaceflight and ground-based simulations of microgravity and radiation. Overall, GeneLab will facilitate the generation and query of parallel multi-omics data, and

Small-scale hydro power: from theory to practice - 15 international manufacturers implement MHyLab hydraulic profiles; Petite hydroelectricite: de la theorie a la pratique. 15 constucteurs internationaux ont recours aux profils hydrauliques de MHyLab

Energy Technology Data Exchange (ETDEWEB)

Denis, V. [MHyLab, Montcherand (Switzerland)

2010-07-01

This article takes a look at MHyLab, the Research and Development Laboratory for Small-scale Hydropower Turbines in Montcherand, Switzerland. Founded in 1996 this laboratory develops tailored hydraulic turbines for small-scale hydro power plants. Three types of turbines were modeled and tested on MHyLab test rig: Pelton turbines for hydraulic heads between 60 and 700 m; axial turbines of the Kaplan type for 1 to 30 m heads; diagonal turbines for 25 to 100 m heads. Up to 2010, 15 manufacturers from Switzerland, France, Germany, New Zealand and Japan have used hydraulic profiles developed by MHyLab. 70 turbines have been manufactured and installed, the total power of which is about 38 MW. Their total annual production is estimated to 189 GWh. The illustrated article describes the methodology followed by MHyLab and some of its realisations in Switzerland and Jordan.

Neutron flux density data acquisition system based on LabVIEW

International Nuclear Information System (INIS)

Zhao Yanhui; Zhao Xiuliang; Li Zonglun; Liang Fengyan; Liu Liyan

2011-01-01

In the LabVIEW software, combined with PCI-6251 data acquisition card, VI of neutron flux density data acquisition is realized by DAQmx data acquisition functions. VI is composed of front panel and block diagram. The data collected can be displayed in the forms of the data curve and the data control, and saved in the form of files. Test results show that the frequency of output signal in NI ELVIS can be accurately measured by the system, realizing neutron flux density data acquisition based on LabVIEW. (authors)

GeneLab: Open Science For Exploration

Science.gov (United States)

Galazka, Jonathan

2018-01-01

The NASA GeneLab project capitalizes on multi-omic technologies to maximize the return on spaceflight experiments. The GeneLab project houses spaceflight and spaceflight-relevant multi-omics data in a publicly accessible data commons, and collaborates with NASA-funded principal investigators to maximize the omics data from spaceflight and spaceflight-relevant experiments. I will discuss the current status of GeneLab and give specific examples of how the GeneLab data system has been used to gain insight into how biology responds to spaceflight conditions.

Enhancing pre-service physics teachers' creative thinking skills through HOT lab design

Science.gov (United States)

Malik, Adam; Setiawan, Agus; Suhandi, Andi; Permanasari, Anna

2017-08-01

A research on the implementation of HOT (Higher Order Thinking) Laboratory has been carried out. This research is aimed to compare increasing of creative thinking skills of pre-service physics teachers who receive physics lesson with HOT Lab and with verification lab for the topic of electric circuit. This research used a quasi-experiment methods with control group pretest-posttest design. The subject of the research is 40 Physics Education pre-service physics teachers of UIN Sunan Gunung Djati Bandung. Research samples were selected by class random sampling technique. Data on pre-service physics teachers' creative thinking skills were collected using test of creative thinking skills in the form of essay. The results of the research reveal that average of N-gain of creative thinking skills are for pre-service physics teachers who received lesson with HOT Lab design and for pre-service physics teachers who received lesson with verification lab, respectively. Therefore, we conclude that application of HOT Lab design is more effective to increase creative thinking skills in the lesson of electric circuit.

Ntal/Lab/Lat2

DEFF Research Database (Denmark)

Iwaki, Shoko; Jensen, Bettina M; Gilfillan, Alasdair M

2007-01-01

T cells. As demonstrated in monocytes and B cells, phosphorylated NTAL/LAB/LAT2 recruits signaling molecules such as Grb2, Gab1 and c-Cbl into receptor-signaling complexes. Although gene knock out and knock down studies have indicated that NTAL/LAB/LAT2 may function as both a positive and negative...

Chloride Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/chloridebloodtest.html Chloride Blood Test To use the sharing features on this page, please enable JavaScript. What is a Chloride Blood Test? A chloride blood test measures the ...

Bilirubin Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/bilirubinbloodtest.html Bilirubin Blood Test To use the sharing features on this page, please enable JavaScript. What is a Bilirubin Blood Test? A bilirubin blood test measures the ...

OpenLabNotes--An Electronic Laboratory Notebook Extension for OpenLabFramework.

Science.gov (United States)

List, Markus; Franz, Michael; Tan, Qihua; Mollenhauer, Jan; Baumbach, Jan

2015-10-06

Electronic laboratory notebooks (ELNs) are more accessible and reliable than their paper based alternatives and thus find widespread adoption. While a large number of commercial products is available, small- to mid-sized laboratories can often not afford the costs or are concerned about the longevity of the providers. Turning towards free alternatives, however, raises questions about data protection, which are not sufficiently addressed by available solutions. To serve as legal documents, ELNs must prevent scientific fraud through technical means such as digital signatures. It would also be advantageous if an ELN was integrated with a laboratory information management system to allow for a comprehensive documentation of experimental work including the location of samples that were used in a particular experiment. Here, we present OpenLabNotes, which adds state-of-the-art ELN capabilities to OpenLabFramework, a powerful and flexible laboratory information management system. In contrast to comparable solutions, it allows to protect the intellectual property of its users by offering data protection with digital signatures. OpenLabNotes effectively closes the gap between research documentation and sample management, thus making Open-LabFramework more attractive for laboratories that seek to increase productivity through electronic data management.

OpenLabNotes - An Electronic Laboratory Notebook Extension for OpenLabFramework.

Science.gov (United States)

List, Markus; Franz, Michael; Tan, Qihua; Mollenhauer, Jan; Baumbach, Jan

2015-09-01

Electronic laboratory notebooks (ELNs) are more accessible and reliable than their paper based alternatives and thus find widespread adoption. While a large number of commercial products is available, small- to mid-sized laboratories can often not afford the costs or are concerned about the longevity of the providers. Turning towards free alternatives, however, raises questions about data protection, which are not sufficiently addressed by available solutions. To serve as legal documents, ELNs must prevent scientific fraud through technical means such as digital signatures. It would also be advantageous if an ELN was integrated with a laboratory information management system to allow for a comprehensive documentation of experimental work including the location of samples that were used in a particular experiment. Here, we present OpenLabNotes, which adds state-of-the-art ELN capabilities to OpenLabFramework, a powerful and flexible laboratory information management system. In contrast to comparable solutions, it allows to protect the intellectual property of its users by offering data protection with digital signatures. OpenLabNotes effectively closes the gap between research documentation and sample management, thus making Open- LabFramework more attractive for laboratories that seek to increase productivity through electronic data management.

An advanced lab frame PC-PLC regime for a power supply control

International Nuclear Information System (INIS)

Abdel-Bary, M

2010-01-01

A lab frame automatic control system (LFACS) based on a programmable logic controller (PLC) is designed, developed and tested in the laboratory. The LFACS is designed to control and monitor one DC power supply with output current accuracy 0.001 amps, one automatic valve. Also the LFACS will monitor one full range vacuum measurement and one water leak detector. The control system is built based on the internationally standard programmable logic controller (PLC) from Siemens. Two software's have been used; firstly SIMATIC S 7 lite has been used to build the control program and safety interlocks, secondly winCC flexible (runs in a PC computer and communicates with the PLC by multi point interface PC adapter (MPI) has been used to build the user-machine interface . This lab frame control system will be generalized to a global control system to control the MGC-20 cyclotron. The lab tests showed a reliable and flexible control system.

Reward/Punishment reversal learning in older suicide attempters.

Science.gov (United States)

Dombrovski, Alexandre Y; Clark, Luke; Siegle, Greg J; Butters, Meryl A; Ichikawa, Naho; Sahakian, Barbara J; Szanto, Katalin

2010-06-01

Suicide rates are high in old age, and the contribution of cognitive risk factors remains poorly understood. Suicide may be viewed as an outcome of an altered decision process. The authors hypothesized that impairment in reward/punishment-based learning, a component of affective decision making, is associated with attempted suicide in late-life depression. They expected that suicide attempters would discount past reward/punishment history, focusing excessively on the most recent rewards and punishments. The authors further hypothesized that this impairment could be dissociated from executive abilities, such as forward planning. The authors assessed reward/punishment-based learning using the probabilistic reversal learning task in 65 individuals age 60 and older: suicide attempters, suicide ideators, nonsuicidal depressed elderly, and nondepressed comparison subjects. The authors used a reinforcement learning computational model to decompose reward/punishment processing over time. The Stockings of Cambridge test served as a control measure of executive function. Suicide attempters but not suicide ideators showed impaired probabilistic reversal learning compared to both nonsuicidal depressed elderly and nondepressed comparison subjects, after controlling for effects of education, global cognitive function, and substance use. Model-based analyses revealed that suicide attempters discounted previous history to a higher degree relative to comparison subjects, basing their choice largely on reward/punishment received on the last trial. Groups did not differ in their performance on the Stockings of Cambridge test. Older suicide attempters display impaired reward/punishment-based learning. The authors propose a hypothesis that older suicide attempters make overly present-focused decisions, ignoring past experiences. Modification of this "myopia for the past" may have therapeutic potential.

Altitude Lab

Data.gov (United States)

Federal Laboratory Consortium — The Altitude Lab evaluates the performance of complete oxygen systems operated in individually controlled hypobaric chambers, which duplicate pressures that would be...

DOE EiR at Oakridge National Lab 2008/09

Energy Technology Data Exchange (ETDEWEB)

Bauer, Michael

2012-11-30

This project placed an experienced technology entrepreneur at Oak Ridge National Lab, one of DOE's premier laboratories undertaking cutting edge research in a variety of fields, including energy technologies. With the goal of accelerating the commercialization of advanced energy technologies, the task was to review available technologies at the lab and identify those that qualify for licensing and commercialization by a private startup company, backed by private venture capital. During the project, more than 1,500 inventions filed at the lab were reviewed over a 1 year period; a successively smaller number was selected for more detailed review, ultimately resulting in five, and then 1 technology, being reviewed for immediate commercialization. The chosen technology, consisting in computational chemistry based approached to optimization of enzymes, was tested in lab experiments, paid for by funds raised by ORNL for the purpose of proving out the effectiveness of the technology and readiness for commercialization. The experiments proved out that the technology worked however it's performance proved not yet mature enough to qualify for private venture capital funded commercialization in a high tech startup. As a consequence, the project did not result in a new startup company being formed, as originally intended.

GitLab repository management

CERN Document Server

Hethey, Jonathan

2013-01-01

A simple, easy to understand tutorial guide on how to build teams and efficiently use version control, using GitLab.If you are a system administrator in a company that writes software or are in charge of an infrastructure, this book will show you the most important features of GitLab, including how to speed up the overall process

Are Virtual Labs as Effective as Hands-on Labs for Undergraduate Physics? A Comparative Study at Two Major Universities

Science.gov (United States)

Darrah, Marjorie; Humbert, Roxann; Finstein, Jeanne; Simon, Marllin; Hopkins, John

2014-01-01

Most physics professors would agree that the lab experiences students have in introductory physics are central to the learning of the concepts in the course. It is also true that these physics labs require time and money for upkeep, not to mention the hours spent setting up and taking down labs. Virtual physics lab experiences can provide an…

Designing Viable Business Models for Living Labs

Directory of Open Access Journals (Sweden)

Bernhard R. Katzy

2012-09-01

Full Text Available Over 300 regions have integrated the concept of living labs into their economic development strategy since 2006, when the former Finnish Prime Minister Esko Aho launched the living lab innovation policy initiative during his term of European presidency. Despite motivating initial results, however, success cases of turning research into usable new products and services remain few and uncertainty remains on what living labs actually do and contribute. This practitioner-oriented article presents a business excellence model that shows processes of idea creation and team mobilization, new product development, user involvement, and entrepreneurship through which living labs deliver high-potential investment opportunities. Customers of living labs are identified as investors such as venture capitalists or industrial firms because living labs can generate revenue from them to create their own sustainable business model. The article concludes that living labs provide extensive support “lab” infrastructure and that it remains a formidable challenge to finance it, which calls for a more intensive debate.

A Living Lab as a Service: Creating Value for Micro-enterprises through Collaboration and Innovation

Directory of Open Access Journals (Sweden)

Anna Ståhlbröst

2013-11-01

Full Text Available The need to innovate is increasingly important for all types and sizes of organizations, but the opportunities for innovation differ substantially between them. For micro-, small,- and medium-sized enterprises, innovation activities are both crucial and demanding because of limited resources, competencies, or vision to innovate their offerings. To support these organizations, the concept of living labs as a service has started to emerge. This concept refers to living labs offering services such as designing the idea-generation processes, planning or carrying out real-world tests of innovations, and pre-market launch assessments. In this article, we will present the findings from a study of micro-enterprises operating in the information technology development sector, including the experienced value of services provided to the companies by a research-based living lab. We share experiences from Botnia, our own living lab in northern Sweden. In this living lab, our aim of creating value for customers is of key importance. Our study shows that using a living lab as a service can generate three different types of value: improved innovations, the role the living lab can play, and the support the living lab offers.

Microgrid Central Controller Development and Hierarchical Control Implementation in the Intelligent MicroGrid Lab of Aalborg University

DEFF Research Database (Denmark)

Meng, Lexuan; Savaghebi, Mehdi; Andrade, Fabio

2015-01-01

This paper presents the development of a microgrid central controller in an inverter-based intelligent microgrid (iMG) lab in Aalborg University, Denmark. The iMG lab aims to provide a flexible experimental platform for comprehensive studies of microgrids. The complete control system applied...... in this lab is based on the hierarchical control scheme for microgrids and includes primary, secondary and tertiary control. The structure of the lab, including the lab facilities, configurations and communication network, is first introduced. Primary control loops are developed in MATLAB....../Simulink and compiled to dSPACEs for local control purposes. In order to realize system supervision and proper secondary and tertiary management, a LabVIEW-based microgrid central controller is also developed. The software and hardware schemes are described. An example case is introduced and tested in the iMG lab...

Enhancing Communication Skills of Pre-service Physics Teacher through HOT Lab Related to Electric Circuit

Science.gov (United States)

Malik, A.; Setiawan, A.; Suhandi, A.; Permanasari, A.; Dirgantara, Y.; Yuniarti, H.; Sapriadil, S.; Hermita, N.

2018-01-01

This study aimed to investigate the improvement to pre-service teacher’s communication skills through Higher Order Thinking Laboratory (HOT Lab) on electric circuit topic. This research used the quasi-experiment method with pretest-posttest control group design. Research subjects were 60 students of Physics Education in UIN Sunan Gunung Djati Bandung. The sample was chosen by random sampling technique. Students’ communication skill data collected using a communication skills test instruments-essays form and observations sheets. The results showed that pre-service teacher communication skills using HOT Lab were higher than verification lab. Student’s communication skills in groups using HOT Lab were not influenced by gender. Communication skills could increase due to HOT Lab based on problems solving that can develop communication through hands-on activities. Therefore, the conclusion of this research shows the application of HOT Lab is more effective than the verification lab to improve communication skills of pre-service teachers in electric circuit topic and gender is not related to a person’s communication skills.

RoboLab and virtual environments

Science.gov (United States)

Giarratano, Joseph C.

1994-01-01

A useful adjunct to the manned space station would be a self-contained free-flying laboratory (RoboLab). This laboratory would have a robot operated under telepresence from the space station or ground. Long duration experiments aboard RoboLab could be performed by astronauts or scientists using telepresence to operate equipment and perform experiments. Operating the lab by telepresence would eliminate the need for life support such as food, water and air. The robot would be capable of motion in three dimensions, have binocular vision TV cameras, and two arms with manipulators to simulate hands. The robot would move along a two-dimensional grid and have a rotating, telescoping periscope section for extension in the third dimension. The remote operator would wear a virtual reality type headset to allow the superposition of computer displays over the real-time video of the lab. The operators would wear exoskeleton type arms to facilitate the movement of objects and equipment operation. The combination of video displays, motion, and the exoskeleton arms would provide a high degree of telepresence, especially for novice users such as scientists doing short-term experiments. The RoboLab could be resupplied and samples removed on other space shuttle flights. A self-contained RoboLab module would be designed to fit within the cargo bay of the space shuttle. Different modules could be designed for specific applications, i.e., crystal-growing, medicine, life sciences, chemistry, etc. This paper describes a RoboLab simulation using virtual reality (VR). VR provides an ideal simulation of telepresence before the actual robot and laboratory modules are constructed. The easy simulation of different telepresence designs will produce a highly optimum design before construction rather than the more expensive and time consuming hardware changes afterwards.

Lab-on-a-Chip Pathogen Sensors for Food Safety

Directory of Open Access Journals (Sweden)

Bumsang Kim

2012-08-01

Full Text Available There have been a number of cases of foodborne illness among humans that are caused by pathogens such as Escherichia coli O157:H7, Salmonella typhimurium, etc. The current practices to detect such pathogenic agents are cell culturing, immunoassays, or polymerase chain reactions (PCRs. These methods are essentially laboratory-based methods that are not at all real-time and thus unavailable for early-monitoring of such pathogens. They are also very difficult to implement in the field. Lab-on-a-chip biosensors, however, have a strong potential to be used in the field since they can be miniaturized and automated; they are also potentially fast and very sensitive. These lab-on-a-chip biosensors can detect pathogens in farms, packaging/processing facilities, delivery/distribution systems, and at the consumer level. There are still several issues to be resolved before applying these lab-on-a-chip sensors to field applications, including the pre-treatment of a sample, proper storage of reagents, full integration into a battery-powered system, and demonstration of very high sensitivity, which are addressed in this review article. Several different types of lab-on-a-chip biosensors, including immunoassay- and PCR-based, have been developed and tested for detecting foodborne pathogens. Their assay performance, including detection limit and assay time, are also summarized. Finally, the use of optical fibers or optical waveguide is discussed as a means to improve the portability and sensitivity of lab-on-a-chip pathogen sensors.

Transitioning from ATLAS to LabWindows/CVI overcoming the obstacles

CERN Document Server

Timcho, T J

1999-01-01

As the DoD eyes a move toward the use of Commercial off the Shelf (COTS) software development environments, such as National instruments LabWindowsTM/CVI, for the generation of Test Program Sets (TPS), a few obstacles still remain. In particular the need to handle resource and path allocation, the ability to describe UUT behavior in terms of signals, and the use of simple, multi-action verbs are at a minimum, necessary. By design, LabWindows/CVI, a test-oriented superset of the ANSI C specification, grants the test engineer full control of all aspects of the TPS design process, including full instrument and path control. However, this methodology also has ifs drawbacks; the engineer is forced to define and control all actions, assets and paths explicitly. As the complexity of today's test programs increase, the need to simplify implementation is imperative to reduce TPS cost and complexity. This paper describes a method to simplify the implementation of CVI and how it is currently used with commercially avail...

The Design:Lab as platform in participatory design research

DEFF Research Database (Denmark)

Binder, Thomas; Brandt, Eva

2008-01-01

The notion of laboratory or simply 'lab' has become popular in recent years in areas outside science and technology development. Learning Labs, Innovation Labs, Usability Labs, Media and Communication Labs and even Art Labs designate institutions or fora dedicated to change and experimentation...... as others have frequently used other metaphors like workshop, studio or atelier in design research. In this article we will argue that the laboratory metaphor is particularly suitable and useful for the design:lab, and we will give examples of how we have worked with the design:lab as a platform...

CDC Lab Values

Centers for Disease Control (CDC) Podcasts

2015-02-02

More than fifteen hundred scientists fill the lab benches at CDC, logging more than four million hours each year. CDC’s laboratories play a critical role in the agency’s ability to find, stop, and prevent disease outbreaks. This podcast provides a brief overview of what goes on inside CDC’s labs, and why this work makes a difference in American’s health.  Created: 2/2/2015 by Office of the Associate Director for Communication (OADC).   Date Released: 2/2/2015.

From e-manufacturing to Internet Product Process Development (IPPD) through remote – labs

International Nuclear Information System (INIS)

Nieto, Ernesto Córdoba; Parra, Paulo Andres Cifuentes; Díaz, Juan Camilo Parra

2014-01-01

This paper presents the research developed at Universidad Nacional de Colombia about the e-Manufacturing platform that is being developed and implemented at LabFabEx (acronym in Spanish as L aboratorio Fabrica Experimental ) . This platform besides has an approach to virtual-remote labs that have been tested by several students and engineers of different industrial fields. At this paper it is shown the physical and communication experimental platform, the general scope and characteristics of this e-Manufacturing platform and the virtual lab approach. This research project is funded by COLCIENCIAS (Administrative Department of science, technology and innovation in Colombia) and the enterprise IMOCOM S.A

A new LabVIEW interface for MDSplus

International Nuclear Information System (INIS)

Manduchi, G.; De Marchi, E.; Mandelli, A.

2013-01-01

Highlights: ► Integration object oriented data access layer in LabVIEW. ► A new component of the MDSplus data acquisition package. ► A new approach in the graphical presentation of data acquisition systems. -- Abstract: The paper presents a new interface providing full integration of MDSplus in LabVIEW, based on the recent features of MDSplus, in particular, data streaming, multithreading and Object Oriented interface. Data streaming support fits into the data driven concept of LabVIEW and multithreading is a native concept in LabVIEW. The object oriented interface of MDSplus defines a set of classes which map specific functionality, such as Tree and TreeNode to represent pulse files and data items, respectively, and fits naturally into the LabVIEW Object Oriented programming interface (LVOOP) introduced in version 8.2. MDSplus objects have been mapped onto LabVIEW objects, which act as wrappers to the underlying MDSplus object instance. This approach allows exporting the full MDSplus functionality into LabVIEW retaining the language-independent system view provided by the MDSplus object oriented interface

A new LabVIEW interface for MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G., E-mail: gabriele.manduchi@igi.cnr.it [Consorzio RFX, Euratom-ENEA Association, Padova (Italy); De Marchi, E. [Department of Information Engineering, Padova University (Italy); Mandelli, A. [National Instruments (Italy)

2013-10-15

Highlights: ► Integration object oriented data access layer in LabVIEW. ► A new component of the MDSplus data acquisition package. ► A new approach in the graphical presentation of data acquisition systems. -- Abstract: The paper presents a new interface providing full integration of MDSplus in LabVIEW, based on the recent features of MDSplus, in particular, data streaming, multithreading and Object Oriented interface. Data streaming support fits into the data driven concept of LabVIEW and multithreading is a native concept in LabVIEW. The object oriented interface of MDSplus defines a set of classes which map specific functionality, such as Tree and TreeNode to represent pulse files and data items, respectively, and fits naturally into the LabVIEW Object Oriented programming interface (LVOOP) introduced in version 8.2. MDSplus objects have been mapped onto LabVIEW objects, which act as wrappers to the underlying MDSplus object instance. This approach allows exporting the full MDSplus functionality into LabVIEW retaining the language-independent system view provided by the MDSplus object oriented interface.

DOSAR/CalLab Operations Manual

International Nuclear Information System (INIS)

Bogard, J.S.

2000-01-01

The Life Sciences Division (LSD) of Oak Ridge National Laboratory (ORNL) has a long record of radiation dosimetry research, primarily using the Health Physics Research Reactor (HPRR) and the Dosimetry Applications Research (DOSAR) Program Calibration Laboratory (CalLab), referred to formerly as the Radiation Calibration Laboratory. These facilities have been used by a broad segment of the research community to perform a variety of experiments in areas including, but not limited to, radiobiology, radiation dosimeter and instrumentation development and calibration, and the testing of materials in a variety of radiation environments

The effect of Sm-doping on optical properties of LaB6 nanoparticles

International Nuclear Information System (INIS)

Chao, Luomeng; Bao, Lihong; Shi, Junjie; Wei, Wei; Tegus, O.; Zhang, Zhidong

2015-01-01

Highlights: • Nanoparticles of Sm-doped LaB 6 have been prepared by solid state reaction. • All samples exhibit high absorbance in NIR range and UV range. • The increase of Sm-doping amount shifts the position of minimum absorptance value. • The optical properties of Sm-doped LaB 6 were interpreted by DFT theory. - Abstract: Nanocrystalline particles of LaB 6 , SmB 6 and Sm-doped LaB 6 have been prepared by a solid-state reaction in order to investigate the optical properties of ternary rare-earth hexaborides. The sizes of prepared nanoparticles range from dozens to more than 200 nm, as confirmed by XRD, SEM and TEM examinations. The optical property concerning the absorption spectra was tested with ultraviolet-visible-near infrared (UV-vis-NIR) absorption spectrum. All samples exhibit high absorbance in NIR range and UV range. The increase of Sm-doping amount shifts the position of minimum absorptance value of LaB 6 to the long-wave direction. Density functional theory (DFT) is employed to interpret the optical properties of Sm-doped LaB 6 , and results indicate that Sm 4f states change the DOS at near Fermi surface of LaB 6 after Sm doping and the reduced number of conduction electrons results into the change of absorption spectra

U.S./Russian lab-to-lab materials protection, control and accounting program efforts at the Institute of Inorganic Materials

International Nuclear Information System (INIS)

Ruhter, W.D.; Kositsyn, V.; Rudenko, V.; Siskind, B.; Bieber, A.; Hoida, H.; Augustson; Ehinger, M.; Smith, B.W.

1996-01-01

The All-Russian Scientific Research Institute of Inorganic Materials (VNIINM) performs research in nuclear power reactor fuel,m spent fuel reprocessing and waste management, materials science of fissionable and reactor structural materials, metallurgy, superconducting materials, and analytical sciences. VNIINM supports the Ministry of Atomic Energy of the Russian Federation (MINATOM) in technologies for fabrication and processing of nuclear fuel. As a participant in the U. S./Russian Lab-to-Lab nuclear materials protection, control and accounting (MPC ampersand A) program, VNIINM is providing evaluation, certification, and implementation of measurement methods for such materials. In 1966, VNIINM will be working with Brookhaven staff in developing and documenting material control and accounting requirements for nuclear materials in bulk form, Livermore and Los Alamos staff in testing and evaluating gamma-ray spectrometry methods for bulk materials, Los Alamos staff in test and evaluation of neutron-coincidence counting techniques, Oak Ridge staff in accounting of bulk materials with process instrumentation, and Pacific Northwest staff on automating VNIINM's coulometric titration system. In addition, VNIINM will develop a computerized accounting system for nuclear material within VNIINM and heir storage facility. This paper describes the status of this work and anticipated progress in 1996

Awakening interest in the natural sciences - BASF's Kids' Labs.

Science.gov (United States)

Lang, Cinthia

2012-01-01

At BASF's Ludwigshafen headquarters, kids and young adults in grades 1-13 can learn about chemistry in the Kids' Labs. Different programs exist for different levels of knowledge. In the two 'Hands-on Lab H(2)O & Co.' Kids' Labs, students from grades 1-6 explore the secrets of chemistry. BASF Kids' Labs have now been set up in over 30 countries. In Switzerland alone, almost 2,000 students have taken part in the 'Water Loves Chemistry' Kids' Lab since it was started in 2011. In Alsace, 600 students have participated to date. In the Teens' Lab 'Xplore Middle School', middle school students explore five different programs with the themes 'substance labyrinth', 'nutrition', 'coffee, caffeine & co.', 'cosmetics' and 'energy'. Biotechnological methods are the focus of the Teens' Lab 'Xplore Biotech' for students taking basic and advanced biology courses. In the 'Xplore High School' Teens' Lab, chemistry teachers present their own experimental lab instruction for students in basic and advanced chemistry courses. The Virtual Lab has been expanding the offerings of the BASF Kids' Labs since 2011. The online lab was developed by the company for the International Year Of Chemistry and gives kids and young adults the opportunity to do interactive experiments outside of the lab.

Three pedagogical approaches to introductory physics labs and their effects on student learning outcomes

Science.gov (United States)

Chambers, Timothy

This dissertation presents the results of an experiment that measured the learning outcomes associated with three different pedagogical approaches to introductory physics labs. These three pedagogical approaches presented students with the same apparatus and covered the same physics content, but used different lab manuals to guide students through distinct cognitive processes in conducting their laboratory investigations. We administered post-tests containing multiple-choice conceptual questions and free-response quantitative problems one week after students completed these laboratory investigations. In addition, we collected data from the laboratory practical exam taken by students at the end of the semester. Using these data sets, we compared the learning outcomes for the three curricula in three dimensions of ability: conceptual understanding, quantitative problem-solving skill, and laboratory skills. Our three pedagogical approaches are as follows. Guided labs lead students through their investigations via a combination of Socratic-style questioning and direct instruction, while students record their data and answers to written questions in the manual during the experiment. Traditional labs provide detailed written instructions, which students follow to complete the lab objectives. Open labs provide students with a set of apparatus and a question to be answered, and leave students to devise and execute an experiment to answer the question. In general, we find that students performing Guided labs perform better on some conceptual assessment items, and that students performing Open labs perform significantly better on experimental tasks. Combining a classical test theory analysis of post-test results with in-lab classroom observations allows us to identify individual components of the laboratory manuals and investigations that are likely to have influenced the observed differences in learning outcomes associated with the different pedagogical approaches. Due to

LabVIEW Real-Time

CERN Multimedia

CERN. Geneva; Flockhart, Ronald Bruce; Seppey, P

2003-01-01

With LabVIEW Real-Time, you can choose from a variety of RT Series hardware. Add a real-time data acquisition component into a larger measurement and automation system or create a single stand-alone real-time solution with data acquisition, signal conditioning, motion control, RS-232, GPIB instrumentation, and Ethernet connectivity. With the various hardware options, you can create a system to meet your precise needs today, while the modularity of the system means you can add to the solution as your system requirements grow. If you are interested in Reliable and Deterministic systems for Measurement and Automation, you will profit from this seminar. Agenda: Real-Time Overview LabVIEW RT Hardware Platforms - Linux on PXI Programming with LabVIEW RT Real-Time Operating Systems concepts Timing Applications Data Transfer

Using hot lab to increase pre-service physics teacher’s critical thinking skills related to the topic of RLC circuit

Science.gov (United States)

Malik, A.; Setiawan, A.; Suhandi, A.; Permanasari, A.; Samsudin, A.; Safitri, D.; Lisdiani, S. A. S.; Sapriadil, S.; Hermita, N.

2018-05-01

This research purposes to explore the used of Higher Order Thinking Laboratory (HOT-Lab) in enhancing the critical thinking skills of pre-service teachers related to the topic of Resistors, Inductors, Capacitor (RLC circuit). This study utilised a quasi-experiment method with Pretest-Posttest Control Group design. The sample of the study was 60 students that were divided into two groups covering in experiment and control group, consists of 30 students. The instrument for measuring critical thinking skills is essay test. Data has been analyzed using normalized gain average, effect size, and t-test. The results show that students’ critical thinking skills using the HOT Lab are higher than the verification lab. Using HOT-lab was implemented in the form of activity in the laboratory can improve high-order thinking skills. Hence, it was concluded that the use of HOT Lab had a greater impact on improving students’ critical thinking skills on RLC topic. Finally, HOT Lab can be used for other physics topics.

UniSchooLabs Toolkit: Tools and Methodologies to Support the Adoption of Universities’ Remote and Virtual Labs in Schools

Directory of Open Access Journals (Sweden)

Augusto Chioccariello

2012-11-01

Full Text Available The UniSchooLabs project aims at creating an infrastructure supporting web access to remote/virtual labs and associated educational resources to engage learners with hands-on and minds-on activities in science, technology and math in schools. The UniSchooLabs tool-kit supports the teacher in selecting a remote or virtual lab and developing a lab activity based on an inquiry model template. While working with the toolkit the teacher has access to three main features: a a catalogue of available online laboratories; b an archive of activities created by other users; c a tool for creating new activities or reusing existing ones.

Incorporating lab experience into computer security courses

NARCIS (Netherlands)

Ben Othmane, L.; Bhuse, V.; Lilien, L.T.

2013-01-01

We describe our experience with teaching computer security labs at two different universities. We report on the hardware and software lab setups, summarize lab assignments, present the challenges encountered, and discuss the lessons learned. We agree with and emphasize the viewpoint that security

UC$_{x}$ prototype target tests for ActiLab-ENSAR

CERN Multimedia

Targets based on uranium and thorium refractory compounds have been at the heart of the isotope mass-separation online (ISOL) technique since its first pioneer experiment in 1951. Different developments took place along the years in the various facilities, and today porous uranium carbides with excess graphite phase are used throughout the different operating facilities. However little is known about the influence of their microstructure, crystallography, porosity and chemistry on the isotope release properties. Recently submicron, porous SiC carbide materials with improved exotic sodium and magnesium yields could be used without significant degradation over extended periods at ISOLDE, providing the first direct evidence that such kind of matrices can be used to improve the ISOL beam performance for exotic alkali and earth-alkali beams. Within the framework of ActiLab in FP7-ENSAR: Integrating R&D on ISOL UC targets, several uranium carbide target materials are now under development with the objective to ...

Bacteria Culture Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/bacteriaculturetest.html Bacteria Culture Test To use the sharing features on this page, please enable JavaScript. What is a Bacteria Culture Test? Bacteria are a large group of ...

Flu (Influenza) Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/fluinfluenzatest.html Flu (Influenza) Test To use the sharing features on this page, please enable JavaScript. What is a Flu (Influenza) Test? Influenza, known as the flu , is ...

Allergy Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/allergybloodtest.html Allergy Blood Test To use the sharing features on this page, please enable JavaScript. What is an Allergy Blood Test? Allergies are a common and chronic ...

Lab architecture

Science.gov (United States)

Crease, Robert P.

2008-04-01

There are few more dramatic illustrations of the vicissitudes of laboratory architecturethan the contrast between Building 20 at the Massachusetts Institute of Technology (MIT) and its replacement, the Ray and Maria Stata Center. Building 20 was built hurriedly in 1943 as temporary housing for MIT's famous Rad Lab, the site of wartime radar research, and it remained a productive laboratory space for over half a century. A decade ago it was demolished to make way for the Stata Center, an architecturally striking building designed by Frank Gehry to house MIT's computer science and artificial intelligence labs (above). But in 2004 - just two years after the Stata Center officially opened - the building was criticized for being unsuitable for research and became the subject of still ongoing lawsuits alleging design and construction failures.

mQoL smart lab

DEFF Research Database (Denmark)

De Masi, Alexandre; Ciman, Matteo; Gustarini, Mattia

2016-01-01

serve quality research in all of them. In this paper, we present own "mQoL Smart Lab" for interdisciplinary research efforts on individuals' "Quality of Life" improvement. We present an evolution of our current in-house living lab platform enabling continuous, pervasive data collection from individuals...

Evaluation of the Usability of Different Virtual Lab Software Used in Physics Courses

Directory of Open Access Journals (Sweden)

O. Karagoz

2010-11-01

Full Text Available In recent years the use of virtual lab software has become ubiquitous in education settings. The purpose of the current study is to de¬velop an Evaluation Scale to allow the easy and fast assessment of virtual lab software. During the development of the Evaluation Scale, theoretical and experimental studies investigating the effects of different software on learn¬ing, particularly in terms of usability, were utilized. The Evaluation Scale was created by adding new attributes to pre-existing scales, and comprises three sections – attributes related to the interface of the software; attributes related to its use as a material in education; and attributes related to product and ser¬vice support – and 79 items. Testing of the Evaluation Scale was carried out using two different virtual lab programmes, with the help of a checklist. The evaluation was carried out by physics teachers and academics that had previ¬ously used similar software, and consistency between the results was consid¬ered to represent inter-rater reliability. At the end of the study, the usability of the Evaluation Scale was tested, and the instructor evaluations regarding the usability characteristics considered sufficient and that require improvement in virtual lab software were also investigated.

Ontology: A Support Structure for a V-Labs Network: Euronet-Lab

Directory of Open Access Journals (Sweden)

Raul Cordeiro Correia

2012-11-01

Full Text Available Our propose is to build a network of virtual laboratories, based in a Virtual Closet that will contain all the elements and parts that are needed to build the various experiences available in a v-labs network (that we call Euronet-Lab. To build this complex network we need to find a system that supports effectively this structure. This probably will be a enormous database of v-labs and independent elements, where will be possible sometimes to “recycle” some of the elements. This means “re-use” the same element several times in many experiences. To do this is necessary to have a structure that allows us to have several instances of the same element. It’s important that in our structure and virtual environment we can create several “images” of the same reality and this images can be used simultaneously in different circuits/experiments. This means that we can create several instances of the same element, to be used in different experiences and exercises.

Future{at}Labs.Prosperity Game{trademark}

Energy Technology Data Exchange (ETDEWEB)

Beck, D.F.; Boyack, K.W.; Berman, M. [Sandia National Labs., Albuquerque, NM (United States). Innovative Alliances Dept.

1996-10-01

Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games, Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education, and research. These issues can be examined from a variety of perspectives ranging from global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Future{at}Labs.Prosperity Game{trademark} conducted under the sponsorship of the Industry Advisory Boards of the national labs, the national labs, Lockheed Martin Corporation, and the University of California. Players were drawn from all stakeholders involved including government, industry, labs, and academia. The primary objectives of this game were to: (1) explore ways to optimize the role of the multidisciplinary labs in serving national missions and needs; (2) explore ways to increase collaboration and partnerships among government, laboratories, universities, and industry; and (3) create a network of partnership champions to promote findings and policy options. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning the future of the labs.

Lab-on-a-brane: nanofibrous polymer membranes to recreate organ-capillary interfaces

Science.gov (United States)

Budhwani, Karim I.; Thomas, Vinoy; Sethu, Palaniappan

2016-03-01

Drug discovery is a complex and time consuming process involving significant basic research and preclinical evaluation prior to testing in patients. Preclinical studies rely extensively on animal models which often fail in human trials. Biomimetic microphysiological systems (MPS) using human cells can be a promising alternative to animal models; where critical interactions between different organ systems are recreated to provide physiologically relevant in vitro human models. Central here are blood-vessel networks, the interface controlling transport of cellular and biomolecular components between the circulating fluid and underlying tissue. Here we present a novel lab-on-a-brane (or lab-on-a-membrane) nanofluidics MPS that combines the elegance of lab-on-a-chip with the more realistic morphology of 3D fibrous tissue-engineering constructs. Our blood-vessel lab-on-a-brane effectively simulates in vivo vessel-tissue interface for evaluating transendothelial transport in various pharmacokinetic and nanomedicine applications. Attributes of our platform include (a) nanoporous barrier interface enabling transmembrane molecular transport, (b) transformation of substrate into nanofibrous 3D tissue matrix, (c) invertible-sandwich architecture, and (d) simple co-culture mechanism for endothelial and smooth muscle layers to accurately mimic arterial anatomy. Structural, mechanical, and transport characterization using scanning electron microscopy, stress/strain analysis, infrared spectroscopy, immunofluorescence, and FITC-Dextran hydraulic permeability confirm viability of this in vitro system. Thus, our lab-on-a-brane provides an effective and efficient, yet considerably inexpensive, physiologically relevant alternative for pharmacokinetic evaluation; possibly reducing animals used in preclinical testing, costs from false starts, and time-to-market. Furthermore, it can be configured in multiple simultaneous arrays for personalized and precision medicine applications and for

Porcine wet lab improves surgical skills in third year medical students.

Science.gov (United States)

Drosdeck, Joseph; Carraro, Ellen; Arnold, Mark; Perry, Kyle; Harzman, Alan; Nagel, Rollin; Sinclair, Lynnsay; Muscarella, Peter

2013-09-01

Medical students desire to become proficient in surgical techniques and believe their acquisition is important. However, the operating room is a challenging learning environment. Small group procedural workshops can improve confidence, participation, and performance. The use of fresh animal tissues has been rated highly among students and improves their surgical technique. Greater exposure to surgical procedures and staff could positively influence students' interest in surgical careers. We hypothesized that a porcine "wet lab" course for third year medical students would improve their surgical skills. Two skills labs were conducted for third year medical students during surgery clerkships in the fall of 2011. The students' surgical skills were first evaluated in the operating room across nine dimensions. Next, the students performed the following procedures during the skills lab: (1) laparotomy; (2) small bowel resection; (3) splenectomy; (4) partial hepatectomy; (5) cholecystectomy; (6) interrupted abdominal wall closure; (7) running abdominal wall closure; and (8) skin closure. After the skills lab, the students were re-evaluated in the operating room across the same nine dimensions. Student feedback was also recorded. Fifty-one participants provided pre- and post-lab data for use in the final analysis. The mean scores for all nine surgical skills improved significantly after participation in the skills lab (P ≤ 0.002). Cumulative post-test scores also showed significant improvement (P = 0.002). Finally, the student feedback was largely positive. The surgical skills of third year medical students improved significantly after participation in a porcine wet lab, and the students rated the experience as highly educational. Integration into the surgery clerkship curriculum would promote surgical skill proficiency and could elicit interest in surgical careers. Copyright © 2013 Elsevier Inc. All rights reserved.

Programming Arduino with LabVIEW

CERN Document Server

Schwartz, Marco

2015-01-01

If you already have some experience with LabVIEW and want to apply your skills to control physical objects and make measurements using the Arduino sensor, this book is for you. Prior knowledge of Arduino and LabVIEW is essential to fully understand the projects detailed in this book.

Exploring the changing learning environment of the gross anatomy lab.

Science.gov (United States)

Hopkins, Robin; Regehr, Glenn; Wilson, Timothy D

2011-07-01

The objective of this study was to assess the impact of virtual models and prosected specimens in the context of the gross anatomy lab. In 2009, student volunteers from an undergraduate anatomy class were randomly assigned to study groups in one of three learning conditions. All groups studied the muscles of mastication and completed identical learning objectives during a 45-minute lab. All groups were provided with two reference atlases. Groups were distinguished by the type of primary tools they were provided: gross prosections, three-dimensional stereoscopic computer model, or both resources. The facilitator kept observational field notes. A prepost multiple-choice knowledge test was administered to evaluate students' learning. No significant effect of the laboratory models was demonstrated between groups on the prepost assessment of knowledge. Recurring observations included students' tendency to revert to individual memorization prior to the posttest, rotation of models to match views in the provided atlas, and dissemination of groups into smaller working units. The use of virtual lab resources seemed to influence the social context and learning environment of the anatomy lab. As computer-based learning methods are implemented and studied, they must be evaluated beyond their impact on knowledge gain to consider the effect technology has on students' social development.

U.S./Russian lab-to-lab materials protection, control and accounting program efforts at the Institute of Inorganic Materials. Revision 1

International Nuclear Information System (INIS)

Ruhter, W.D.; Kositsyn, V.; Rudenko, V.; Siskind, B.; Bieber, A.; Hoida, Hiroshi; Augustson, R.; Ehinger, M.; Smith, B.W.

1996-01-01

The All-Russian Scientific Research Institute of Inorganic Materials (VNIINM) performs research in nuclear power reactor fuel, spent fuel reprocessing and waste management, materials science of fissionable and reactor structural materials, metallurgy, superconducting materials, and analytical sciences. VNIINM supports the Ministry of Atomic Energy of the Russian Federation (MINATOM) in technologies for fabrication and processing of nuclear fuel. As a participant in the US/Russian Lab-to-Lab nuclear materials protection, control and accounting (MPC and A) program, VNIINM is providing support for measurements of nuclear materials in bulk forms by developing specifications, test and evaluation, certification, and implementation of measurement methods for such materials. In 1996, VNIINM will be working with Brookhaven staff in developing and documenting material control and accounting requirements for nuclear materials in bulk form, Livermore and Los Alamos staff in testing and evaluating gamma-ray spectrometry methods for bulk materials, Los Alamos staff in test and evaluation of neutron-coincidence counting techniques, Oak Ridge staff in accounting of bulk materials with process instrumentation, and Pacific Northwest staff on automating VNIINM's coulometric titration system. In addition, VNIINM will develop a computerized accounting system for nuclear material within VNIINM and their storage facility. The paper will describe the status of this work and anticipated progress in 1996

OpenLabNotes – An Electronic Laboratory Notebook Extension for OpenLabFramework

Directory of Open Access Journals (Sweden)

List Markus

2015-09-01

Full Text Available Electronic laboratory notebooks (ELNs are more accessible and reliable than their paper based alternatives and thus find widespread adoption. While a large number of commercial products is available, small- to mid-sized laboratories can often not afford the costs or are concerned about the longevity of the providers. Turning towards free alternatives, however, raises questions about data protection, which are not sufficiently addressed by available solutions. To serve as legal documents, ELNs must prevent scientific fraud through technical means such as digital signatures. It would also be advantageous if an ELN was integrated with a laboratory information management system to allow for a comprehensive documentation of experimental work including the location of samples that were used in a particular experiment. Here, we present OpenLabNotes, which adds state-of-the-art ELN capabilities to OpenLabFramework, a powerful and flexible laboratory information management system. In contrast to comparable solutions, it allows to protect the intellectual property of its users by offering data protection with digital signatures. OpenLabNotes effectively closes the gap between research documentation and sample management, thus making Open- LabFramework more attractive for laboratories that seek to increase productivity through electronic data management.

Prealbumin Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... enough nutrition if you are in the hospital. Nutrition plays an important role in recovery and healing. Help diagnose certain infections and chronic diseases Why do I need a prealbumin blood test? Your health care provider ... test to keep track of your nutrition if you are in the hospital. You may ...

A genome-wide association study of attempted suicide

Science.gov (United States)

Willour, Virginia L.; Seifuddin, Fayaz; Mahon, Pamela B.; Jancic, Dubravka; Pirooznia, Mehdi; Steele, Jo; Schweizer, Barbara; Goes, Fernando S.; Mondimore, Francis M.; MacKinnon, Dean F.; Perlis, Roy H.; Lee, Phil Hyoun; Huang, Jie; Kelsoe, John R.; Shilling, Paul D.; Rietschel, Marcella; Nöthen, Markus; Cichon, Sven; Gurling, Hugh; Purcell, Shaun; Smoller, Jordan W.; Craddock, Nicholas; DePaulo, J. Raymond; Schulze, Thomas G.; McMahon, Francis J.; Zandi, Peter P.; Potash, James B.

2011-01-01

The heritable component to attempted and completed suicide is partly related to psychiatric disorders and also partly independent of them. While attempted suicide linkage regions have been identified on 2p11–12 and 6q25–26, there are likely many more such loci, the discovery of which will require a much higher resolution approach, such as the genome-wide association study (GWAS). With this in mind, we conducted an attempted suicide GWAS that compared the single nucleotide polymorphism (SNP) genotypes of 1,201 bipolar (BP) subjects with a history of suicide attempts to the genotypes of 1,497 BP subjects without a history of suicide attempts. 2,507 SNPs with evidence for association at p<0.001 were identified. These associated SNPs were subsequently tested for association in a large and independent BP sample set. None of these SNPs were significantly associated in the replication sample after correcting for multiple testing, but the combined analysis of the two sample sets produced an association signal on 2p25 (rs300774) at the threshold of genome-wide significance (p= 5.07 × 10−8). The associated SNPs on 2p25 fall in a large linkage disequilibrium block containing the ACP1 gene, a gene whose expression is significantly elevated in BP subjects who have completed suicide. Furthermore, the ACP1 protein is a tyrosine phosphatase that influences Wnt signaling, a pathway regulated by lithium, making ACP1 a functional candidate for involvement in the phenotype. Larger GWAS sample sets will be required to confirm the signal on 2p25 and to identify additional genetic risk factors increasing susceptibility for attempted suicide. PMID:21423239

Memory impairment in those who attempted suicide by benzodiazepine overdose

NARCIS (Netherlands)

Verwey, B.; Eling, P.A.T.M.; Wientjes, H.J.F.M.; Zitman, F.G.

2000-01-01

Backgroud: a prospective study was done to investigate the presence of anterograde amnesia in suicide attempters who took benzodiazepines (BZ) and to study the correlation with sedation. Method: in 43 patients, who attempted suicide by taking benzodiazepines, memory perfomrance was tested on a

Dynamic magnetic particle actuation for integrated lab-on-chip biosensing

NARCIS (Netherlands)

Jong, de A.M.; Reenen, van A.; Prins, M.W.J.

2014-01-01

The demand for easy to use and cost effective medical technologies inspires scientists to develop innovative lab-on-chip technologies for in-vitro diagnostic testing. We study the use of magnetic particles actuated by magnetic fields to perform different microfluidic handling steps of an integrated

The Telecom Lab is moving

CERN Multimedia

IT Department

2009-01-01

As of 2nd March 2009, the Telecom Lab will move to Building 58 R-017. The Telecom Lab is the central point for all support questions regarding CERN mobile phone services (provision of SIM cards, requests for modifications of subscriptions, diagnostics for mobile phone problems, etc.). The opening hours as well as the contact details for the Telecom Lab remain unchanged: New location: Building 58 R-017 Opening hours: Every week day, from 11 a.m. to 12 a.m. Phone number: 72480 Email address: labo.telecom@cern.ch This change has no impact on support requests for mobile services. Users can still submit their requests concerning mobile phone subscriptions using the usual EDH form (https://edh.cern.ch/Document/GSM). The automatic message sent to inform users of their SIM card availability will be updated to indicate the new Telecom Lab location. You can find all information related to CERN mobile phone services at the following link: http://cern.ch/gsm CS Section - IT/CS group

Assessment of Student Learning in Modern Experiments in the Introductory Calculus-Based Physics Labs

Science.gov (United States)

Woodahl, Brian; Ross, John; Lang, Sarah; Scott, Derek; Williams, Jeremy

2010-10-01

With the advent of newer microelectronic sensors it's now possible to modernize introductory physics labs with the latest technology and this may allow for enhanced student participation/learning in the experiments. For example, force plate sensors can digitize and record the force on an object, later it can be analyzed in detail (i.e, impulse from force vs. time). Small 3-axis accelerometers can record 3-dim, time-dependent acceleration of objects undergoing complex motions. These devices are small, fairly easy to use, and importantly, are likely to enhance student learning by ``personalizing'' data collection, i.e. making the student an active part of the measurement process and no longer a passive observer. To assess whether these new high-tech labs enhance student learning, we have implemented pre- and post- test sessions to measure the effectiveness of student learning. Four of our calculus-based lab sections were used: Two sections the control group, using the previous ``old technology'' labs, the other two, the experimental group, using the new ``modern technology'' labs. Initial returns of assessment data offer some surprising insight.

Subsurface multidisciplinary research results at ICTJA-CSIC downhole lab and test site

Science.gov (United States)

Jurado, Maria Jose; Crespo, Jose; Salvany, Josep Maria; Teixidó, Teresa

2017-04-01

Two scientific boreholes, Almera-1 and Almera-2 were drilled in the Barcelona University campus area in 2011. The main purpose for this drilling was to create a new geophysical logging and downhole monitoring research facility and infrastructure. We present results obtained in the frame of multidisciplinary studies and experiments carried out since 2011 at the ICTJA "Borehole Geophysical Logging Lab - Scientific Boreholes Almera" downhole lab facilities. First results obtained from the scientific drilling, coring and logging allowed us to characterize the urban subsurface geology and hydrology adjacent to the Institute of Earth Sciences Jaume Almera (ICTJA-CSIC) in Barcelona. The subsurface geology and structural picture has been completed with recent geophysical studies and monitoring results. The upper section of Almera-1 214m deep hole was cased with PVC after drilling and after the logging operations. An open hole interval was left from 112m to TD (Paleozoic section). Almera-2 drilling reached 46m and was cased also with PVC to 44m. Since completion of the drilling in 2011, both Almera-1 and Almera-2 have been extensively used for research purposes, tests, training, hydrological and geophysical monitoring. A complete set of geophysical logging measurements and borehole oriented images were acquired in open hole mode of the entire Almera-1 section. Open hole measurements included acoustic and optical imaging, spectral natural gamma ray, full wave acoustic logging, magnetic susceptibility, hydrochemical-temperature logs and fluid sampling. Through casing (PVC casing) measurements included spectral gamma ray logging, full wave sonic and acoustic televiewer. A Quaternary to Paleozoic section was characterized based on the geophysical logging and borehole images interpretation and also on the complete set of (wireline) cores of the entire section. Sample availability was intended for geological macro and micro-facies detailed characterization, mineralogical and

13 scientists aced their science communication test at the FameLab final

CERN Document Server

Antonella Del Rosso

2015-01-01

On 8 May, the joint CERN and Swiss FameLab final took place in CERN’s Restaurant 1, which was transformed into a cosy setting for the special occasion. The jury selected Oskari Vinko, a Master’s student in synthetic biology at ETH Zurich, as the winner of the Swiss final while Lillian Smestad, a physicist in the Aegis collaboration, will be the first CERN finalist to go to the international final at the Cheltenham Science Festival. In addition, CMS physicist Christos Lazaridis was awarded the audience prize.   

Heavy Metal Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/heavymetalbloodtest.html Heavy Metal Blood Test To use the sharing features ... this page, please enable JavaScript. What is a Heavy Metal Blood Test? A heavy metal blood test ...

Lipoprotein (a) Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/lipoproteinabloodtest.html Lipoprotein (a) Blood Test To use the sharing features ... this page, please enable JavaScript. What is a Lipoprotein (a) Blood Test? A lipoprotein (a) test measures ...

Control and Non-Payload Communications (CNPC) Prototype Radio - Generation 2 Security Architecture Lab Test Report

Science.gov (United States)

Iannicca, Dennis C.; McKim, James H.; Stewart, David H.; Thadhani, Suresh K.; Young, Daniel P.

2015-01-01

NASA Glenn Research Center, in cooperation with Rockwell Collins, is working to develop a prototype Control and Non-Payload Communications (CNPC) radio platform as part of NASA Integrated Systems Research Program's (ISRP) Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) project. A primary focus of the project is to work with the FAA and industry standards bodies to build and demonstrate a safe, secure, and efficient CNPC architecture that can be used by industry to evaluate the feasibility of deploying a system using these technologies in an operational capacity. GRC has been working in conjunction with these groups to assess threats, identify security requirements, and to develop a system of standards-based security controls that can be applied to the current GRC prototype CNPC architecture as a demonstration platform. The security controls were integrated into a lab test bed mock-up of the Mobile IPv6 architecture currently being used for NASA flight testing, and a series of network tests were conducted to evaluate the security overhead of the controls compared to the baseline CNPC link without any security. The aim of testing was to evaluate the performance impact of the additional security control overhead when added to the Mobile IPv6 architecture in various modes of operation. The statistics collected included packet captures at points along the path to gauge packet size as the sample data traversed the CNPC network, round trip latency, jitter, and throughput. The effort involved a series of tests of the baseline link, a link with Robust Header Compression (ROHC) and without security controls, a link with security controls and without ROHC, and finally a link with both ROHC and security controls enabled. The effort demonstrated that ROHC is both desirable and necessary to offset the additional expected overhead of applying security controls to the CNPC link.

Anion Gap Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... https://medlineplus.gov/labtests/aniongapbloodtest.html Anion Gap Blood Test To use the sharing features on this page, please enable JavaScript. What is an Anion Gap Blood Test? An anion gap blood test is a way ...

Towards a Manifesto for Living Lab Co-creation

Science.gov (United States)

Følstad, Asbjørn; Brandtzæg, Petter Bae; Gulliksen, Jan; Börjeson, Mikael; Näkki, Pirjo

There is a growing interest in Living Labs for innovation and development in the field of information and communication technology. In particular there seem to be a tendency that current Living Labs aim to involve users for co-creative purposes. However, the current literature on Living Lab co-creation is severely limited. Therefore an Interact workshop is arranged as a first step towards a manifesto for Living Lab co-creation.

A remote lab for experiments with a team of mobile robots.

Science.gov (United States)

Casini, Marco; Garulli, Andrea; Giannitrapani, Antonio; Vicino, Antonio

2014-09-04

In this paper, a remote lab for experimenting with a team of mobile robots is presented. Robots are built with the LEGO Mindstorms technology and user-defined control laws can be directly coded in the Matlab programming language and validated on the real system. The lab is versatile enough to be used for both teaching and research purposes. Students can easily go through a number of predefined mobile robotics experiences without having to worry about robot hardware or low-level programming languages. More advanced experiments can also be carried out by uploading custom controllers. The capability to have full control of the vehicles, together with the possibility to define arbitrarily complex environments through the definition of virtual obstacles, makes the proposed facility well suited to quickly test and compare different control laws in a real-world scenario. Moreover, the user can simulate the presence of different types of exteroceptive sensors on board of the robots or a specific communication architecture among the agents, so that decentralized control strategies and motion coordination algorithms can be easily implemented and tested. A number of possible applications and real experiments are presented in order to illustrate the main features of the proposed mobile robotics remote lab.

A Remote Lab for Experiments with a Team of Mobile Robots

Directory of Open Access Journals (Sweden)

Marco Casini

2014-09-01

Full Text Available In this paper, a remote lab for experimenting with a team of mobile robots is presented. Robots are built with the LEGO Mindstorms technology and user-defined control laws can be directly coded in the Matlab programming language and validated on the real system. The lab is versatile enough to be used for both teaching and research purposes. Students can easily go through a number of predefined mobile robotics experiences without having to worry about robot hardware or low-level programming languages. More advanced experiments can also be carried out by uploading custom controllers. The capability to have full control of the vehicles, together with the possibility to define arbitrarily complex environments through the definition of virtual obstacles, makes the proposed facility well suited to quickly test and compare different control laws in a real-world scenario. Moreover, the user can simulate the presence of different types of exteroceptive sensors on board of the robots or a specific communication architecture among the agents, so that decentralized control strategies and motion coordination algorithms can be easily implemented and tested. A number of possible applications and real experiments are presented in order to illustrate the main features of the proposed mobile robotics remote lab.

A REAL-TIME DATA ACQUISITION APPORACH OF ENVIROMENTAL ERGONOMIC PARAMETER USING LabVIEW

Directory of Open Access Journals (Sweden)

ZULFADLI ZAILAN

2016-04-01

Full Text Available A safe and comfort workstation can increase the performances of the worker. Environment parameter is one of the factor that need to be monitor and display to create a safe and comfort work station. An acquisition system that can monitored and display these environment parameter need to be developed. In this paper, an acquisition system is developed to monitored and display three environment parameter which is sound, light and temperature. An acquisition system consists of sensor, data acquisition (DAQ, power supply board, computer and LabVIEW. Sensor will captured the environment parameter then DAQ convert the signal gained from sensor into computer. All the data from sensor and DAQ then will be program by using LabVIEW. An acquisition system has been test and able to captured all three environment data and test is conducted in the lab scale. It is hoped that with this acquisition system, a safe and comfort workstation can be provided to a worker and eventually can increase workers performance and decrease worker’s medical cost due to low accident and health problem among workers.

LabVIEW A Developer's Guide to Real World Integration

CERN Document Server

Fairweather, Ian

2011-01-01

LabVIEW(t) has become one of the preeminent platforms for the development of data acquisition and data analysis programs. LabVIEW(t): A Developer's Guide to Real World Integration explains how to integrate LabVIEW into real-life applications. Written by experienced LabVIEW developers and engineers, the book describes how LabVIEW has been pivotal in solving real-world challenges. Each chapter is self-contained and demonstrates the power and simplicity of LabVIEW in various applications, from image processing to solar tracking systems. Many of the chapters explore how exciting new technologies c

Development of an Embedded Solar Tracking System with LabVIEW Motion Control

International Nuclear Information System (INIS)

Oh, Seung Jin; Hyun, Jun Ho; Oh, Won Jong; Kim, Yeong Min; Lee, Yoon Joon; Chun, Won Gee

2010-01-01

Motion control is a sub-field of automation, in which the position and/or velocity of machines are controlled using some type of device such as a hydraulic pump, linear actuator, or an electric motor. The motion control is widely used in the packaging, printing, textile, semiconductor production, and power plants. National Instruments LabVIEW is a graphical programming language that has its roots in automation control and data acquisition. Its graphical representation, similar to a process flow diagram, was created to provide an intuitive programming environment for scientist and engineers. Crystal River Nuclear Plant engineers developed automated testing system of nuclear plant control modules in an aging nuclear power plant using LabVIEW to improve performance and reliability and reduce cost. In this study, an embedded two-axis solar tracking system was developed using LabVIEW motion control module

Report from the banding lab

Science.gov (United States)

Tautin, J.

1995-01-01

Mr. Tautin reported on the seemingly everchanging structure of biological science units within the Interior Department. Current Congressional proposals would either change the name of the Bird Banding Lab's parent agency or make it part of the Geological Survey. The current Congress has not looked favorably on science budgets within the Interior Department, and the Banding Lab's budget is being squeezed ever tighter.

Diversity, Equity, & Inclusion at Berkeley Lab

Science.gov (United States)

Berkeley Lab A-Z Index Directory Search Diversity, Equity, & Inclusion at Berkeley Lab Home Diversity & Inclusion Council Women Scientists & Engineers Council Employee Resource Groups -and culture of inclusion are key to attracting and engaging the brightest minds and furthering our

Magnetic Media Lab

Data.gov (United States)

Federal Laboratory Consortium — This lab specializes in tape certification and performance characterization of high density digital tape and isprepared to support the certification of standard size...

Crystallization Formulation Lab

Data.gov (United States)

Federal Laboratory Consortium — The Crystallization Formulation Lab fills a critical need in the process development and optimization of current and new explosives and energetic formulations. The...

Computer-based Astronomy Labs for Non-science Majors

Science.gov (United States)

Smith, A. B. E.; Murray, S. D.; Ward, R. A.

1998-12-01

We describe and demonstrate two laboratory exercises, Kepler's Third Law and Stellar Structure, which are being developed for use in an astronomy laboratory class aimed at non-science majors. The labs run with Microsoft's Excel 98 (Macintosh) or Excel 97 (Windows). They can be run in a classroom setting or in an independent learning environment. The intent of the labs is twofold; first and foremost, students learn the subject matter through a series of informational frames. Next, students enhance their understanding by applying their knowledge in lab procedures, while also gaining familiarity with the use and power of a widely-used software package and scientific tool. No mathematical knowledge beyond basic algebra is required to complete the labs or to understand the computations in the spreadsheets, although the students are exposed to the concepts of numerical integration. The labs are contained in Excel workbook files. In the files are multiple spreadsheets, which contain either a frame with information on how to run the lab, material on the subject, or one or more procedures. Excel's VBA macro language is used to automate the labs. The macros are accessed through button interfaces positioned on the spreadsheets. This is done intentionally so that students can focus on learning the subject matter and the basic spreadsheet features without having to learn advanced Excel features all at once. Students open the file and progress through the informational frames to the procedures. After each procedure, student comments and data are automatically recorded in a preformatted Lab Report spreadsheet. Once all procedures have been completed, the student is prompted for a filename in which to save their Lab Report. The lab reports can then be printed or emailed to the instructor. The files will have full worksheet and workbook protection, and will have a "redo" feature at the end of the lab for students who want to repeat a procedure.

Efficacy of Lactic Acid Bacteria (LAB supplement in management of constipation among nursing home residents

Directory of Open Access Journals (Sweden)

Kim Jung

2010-02-01

Full Text Available Abstract Background Constipation is a significant problem in the elderly, specifically nursing home and/or extended-care facility residents are reported to suffer from constipation. Lactic acid bacteria (LAB are beneficial probiotic organisms that contribute to improved nutrition, microbial balance, and immuno-enhancement of the intestinal tract, as well as diarrhea and constipation effect. The objective of this study was to investigate the efficacy of this LAB supplement in the management of nursing home residents. Methods Nineteen subjects (8M, 11F; mean age 77.1 ± 10.1 suffering with chronic constipation were assigned to receive LAB (3.0 × 1011 CFU/g twice (to be taken 30 minutes after breakfast and dinner a day for 2 weeks in November 2008. Subjects draw up a questionnaire on defecation habits (frequency of defecation, amount and state of stool, and we collected fecal samples from the subjects both before entering and after ending the trial, to investigate LAB levels and inhibition of harmful enzyme activities. Results were tested with SAS and Student's t-test. Results Analysis of questionnaire showed that there was an increase in the frequency of defecation and amount of stool excreted in defecation habit after LAB treatment, but there were no significant changes. And it also affects the intestinal environment, through significantly increase (p p Conclusion LAB, when added to the standard treatment regimen for nursing home residents with chronic constipation, increased defecation habit such as frequency of defecation, amount and state of stool. So, it may be used as functional probiotics to improve human health by helping to prevent constipation.

The Udall Lab

Data.gov (United States)

Federal Laboratory Consortium — The Udall lab is interested in genome evolution and cotton genomics.The cotton genus ( Gossypium) is an extraordinarily diverse group with approximately 50 species...

Laser Research Lab

Data.gov (United States)

Federal Laboratory Consortium — The Laser Research lab is thecenter for the development of new laser sources, nonlinear optical materials, frequency conversion processes and laser-based sensors for...

LAB building a home for scientists

CERN Document Server

Fishman, Mark C

2017-01-01

Laboratories are both monasteries and space stations, redolent of the great ideas of generations past and of technologies to propel the future. Yet standard lab design has changed only little over recent years. Here Mark Fishman describes how to build labs as homes for scientists, to accommodate not just their fancy tools, but also their personalities. This richly illustrated book explores the roles of labs through history, from the alchemists of the Middle Ages to the chemists of the 19th and 20th centuries, and to the geneticists and structural biologists of today, and then turns to the special features of the laboratories Fishman helped to design in Cambridge, Shanghai, and Basel. Anyone who works in, or plans to build a lab, will enjoy this book, which will encourage them to think about how this special environment drives or impedes their important work.

Using collaborative technologies in remote lab delivery systems for topics in automation

Science.gov (United States)

Ashby, Joe E.

Lab exercises are a pedagogically essential component of engineering and technology education. Distance education remote labs are being developed which enable students to access lab facilities via the Internet. Collaboration, students working in teams, enhances learning activity through the development of communication skills, sharing observations and problem solving. Web meeting communication tools are currently used in remote labs. The problem identified for investigation was that no standards of practice or paradigms exist to guide remote lab designers in the selection of collaboration tools that best support learning achievement. The goal of this work was to add to the body of knowledge involving the selection and use of remote lab collaboration tools. Experimental research was conducted where the participants were randomly assigned to three communication treatments and learning achievement was measured via assessments at the completion of each of six remote lab based lessons. Quantitative instruments used for assessing learning achievement were implemented, along with a survey to correlate user preference with collaboration treatments. A total of 53 undergraduate technology students worked in two-person teams, where each team was assigned one of the treatments, namely (a) text messaging chat, (b) voice chat, or (c) webcam video with voice chat. Each had little experience with the subject matter involving automation, but possessed the necessary technical background. Analysis of the assessment score data included mean and standard deviation, confirmation of the homogeneity of variance, a one-way ANOVA test and post hoc comparisons. The quantitative and qualitative data indicated that text messaging chat negatively impacted learning achievement and that text messaging chat was not preferred. The data also suggested that the subjects were equally divided on preference to voice chat verses webcam video with voice chat. To the end of designing collaborative

Software Energy Footprint Lab (SEFlab). Towards the use of energy efficient software applications; Software Energy Footprint Lab (SEFlab). Naar toepassing van energiezuinige softwareapplicaties

Energy Technology Data Exchange (ETDEWEB)

Merkus, B.; Hoekstra, E.; Van den Hoed, R. [Hogeschool van Amsterdam HvA, Amsterdam (Netherlands)

2012-12-15

The Energy Footprint Software Lab (SEFLab) allows researchers to give a detailed overview of the energy consumption of the hardware and software with a combination of advanced techniques in a controlled environment. The project comprised four main activities: (1) professionalization of measurement setup and test protocol; (2) Concrete calculation of two software applications as case studies; (3) an (internal) stakeholder analysis; and (4) dissemination of results [Dutch] Het Software Energy Footprint Lab (SEFLab) stelt onderzoekers in staat met een combinatie van geavanceerde technieken in een gecontroleerde omgeving een gedetailleerd beeld van het energieverbruik van de hardware n.a.v. software-gebruik te meten. Binnen het project stonden vier activiteiten centraal: (1) professionalisering van meetopstelling en testprotocol; (2) concrete doorrekening van twee softwareapplicaties als cases; (3) een (interne) stakeholder-analyse; en (4) disseminatie van resultaten.

Lab-on-fiber technology

CERN Document Server

Cusano, Andrea; Crescitelli, Alessio; Ricciardi, Armando

2014-01-01

This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the "lab-on-fiber" technology. Inspired by the well-established 'lab on-a-chip' concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications.Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate de

LabVIEW: a software system for data acquisition, data analysis, and instrument control.

Science.gov (United States)

Kalkman, C J

1995-01-01

Computer-based data acquisition systems play an important role in clinical monitoring and in the development of new monitoring tools. LabVIEW (National Instruments, Austin, TX) is a data acquisition and programming environment that allows flexible acquisition and processing of analog and digital data. The main feature that distinguishes LabVIEW from other data acquisition programs is its highly modular graphical programming language, "G," and a large library of mathematical and statistical functions. The advantage of graphical programming is that the code is flexible, reusable, and self-documenting. Subroutines can be saved in a library and reused without modification in other programs. This dramatically reduces development time and enables researchers to develop or modify their own programs. LabVIEW uses a large amount of processing power and computer memory, thus requiring a powerful computer. A large-screen monitor is desirable when developing larger applications. LabVIEW is excellently suited for testing new monitoring paradigms, analysis algorithms, or user interfaces. The typical LabVIEW user is the researcher who wants to develop a new monitoring technique, a set of new (derived) variables by integrating signals from several existing patient monitors, closed-loop control of a physiological variable, or a physiological simulator.

Using FlowLab, an educational computational fluid dynamics tool, to perform a comparative study of turbulence models

International Nuclear Information System (INIS)

Parihar, A.; Kulkarni, A.; Stern, F.; Xing, T.; Moeykens, S.

2005-01-01

Flow over an Ahmed body is a key benchmark case for validating the complex turbulent flow field around vehicles. In spite of the simple geometry, the flow field around an Ahmed body retains critical features of real, external vehicular flow. The present study is an attempt to implement such a real life example into the course curriculum for undergraduate engineers. FlowLab, which is a Computational Fluid Dynamics (CFD) tool developed by Fluent Inc. for use in engineering education, allows students to conduct interactive application studies. This paper presents a synopsis of FlowLab, a description of one FlowLab exercise, and an overview of the educational experience gained by students through using FlowLab, which is understood through student surveys and examinations. FlowLab-based CFD exercises were implemented into 57:020 Mechanics of Fluids and Transport Processes and 58:160 Intermediate Mechanics of Fluids courses at the University of Iowa in the fall of 2004, although this report focuses only on experiences with the Ahmed body exercise, which was used only in the intermediate-level fluids class, 58:160. This exercise was developed under National Science Foundation funding by the authors of this paper. The focus of this study does not include validating the various turbulence models used for the Ahmed body simulation, because a two-dimensional simplification was applied. With the two-dimensional simplification, students may setup, run, and post process this model in a 50 minute class period using a single-CPU PC, as required for the 58:160 class at the University of Iowa. It is educational for students to understand the implication of a two- dimensional approximation for essentially a three-dimensional flow field, along with the consequent variation in both qualitative and quantitative results. Additionally, through this exercise, students may realize that the choice of the respective turbulence model will affect simulation prediction. (author)

Innovation - A view from the Lab

Science.gov (United States)

The USDA Ag Lab in Peoria helps bridge the gap between agricultural producers and commercial manufacturers. In 2015, the Ag Lab, officially known as the Agricultural Research Service (ARS) National Center for Agricultural Utilization Research (NCAUR), is celebrating 75 years of research in Peoria. T...

Pitfalls of Internet-accessible diagnostic tests: inadequate performance of a CE-marked Chlamydia test for home use

OpenAIRE

Michel , Claude-Edouard C; Saison , Francis G; Joshi , Hrishikesh; Mahilum-Tapay , Lourdes M; Lee , Helen H

2009-01-01

Abstract Objectives: To evaluate the performance of a CE (Conformitee Europeenne)-marked home test for Chlamydia trachomatis (CT) that is available over the Internet. Methods: A total of 231 eligible women attending the Social Hygiene Clinic (SHC) or Obstetrics-Gynecology (OB-GYN) Clinic in Iloilo City, Philippines was recruited to an evaluation of the HandiLab-C Chlamydia home test (HandiLab-C). One vaginal swab was tested with HandiLab-C on-site and the second at Cambr...

Evaluation and recommendations for work group integration within the Materials and Processes Lab

Science.gov (United States)

Farrington, Phillip A.

1992-01-01

The goal of this study was to evaluate and make recommendations for improving the level of integration of several work groups within the Materials and Processes Lab at the Marshall Space Flight Center. This evaluation has uncovered a variety of projects that could improve the efficiency and operation of the work groups as well as the overall integration of the system. In addition, this study provides the foundation for specification of a computer integrated manufacturing test bed environment in the Materials and Processes Lab.

Test Program Set (TPS) Lab

Data.gov (United States)

Federal Laboratory Consortium — The ARDEC TPS Laboratory provides an organic Test Program Set (TPS) development, maintenance, and life cycle management capability for DoD LCMC materiel developers....

Environment monitoring using LabVIEW

International Nuclear Information System (INIS)

Hawtree, J.

1995-01-01

A system has been developed for electronically recording and monitoring temperature, humidity, and other environmental variables at the Silicon Detector Facility located in Lab D. The data is collected by LabVIEW software, which runs in the background on an Apple Macintosh. The software is completely portable between Macintosh, MS Windows, and Sun platforms. The hardware includes a Macintosh with 8 MB of RAM; an external ADC-1 analog-to-digital converter that uses a serial port; LabVIEW software; temperature sensors; humidity sensors; and other voltage/current sensing devices. ADC values are converted to ASCII strings and entered into files which are read over Ethernet. Advantages include automatic logging, automatic recovery after power interruptions, and the availability of stand-alone applications for other locations with inexpensive software and hardware

Where Lab Tests Are Performed

Science.gov (United States)

... example, there may be sections that focus on microbiology, hematology, chemistry, and blood banking . Other units may perform highly specialized tests using electron microscopy and immunohistochemistry, and still others ...

Physical-chemical treatment of rainwater runoff in recovery and recycling companies: lab-scale investigation.

Science.gov (United States)

Blondeel, E; De Wandel, S; Florin, R; Hugelier, S; Chys, M; Depuydt, V; Folens, K; Du Laing, G; Verliefde, A; Van Hulle, S W H

2017-08-10

Scrap material recovery and recycling companies are producing wastewater in which common pollutants (such as COD, nutrients and suspended solids), toxic metals, polyaromatic hydrocarbons (PAH) and polychlorinated biphenyls (PCB) frequently can exceed the discharge limits. Lab-scale optimisation of different possible physical-chemical treatment techniques was performed on the wastewater originating from three different companies in view of further testing at pilot-scale testing and implementation at full-scale. The lab-scale tests demonstrate that sedimentation or hydrocyclone treatment as stand-alone technique cannot be used for proper treatment of this type of wastewater. Dual bed filtration or coagulation/flocculation proved to be more promising with removal efficiencies of about 71-95% (dual bed filtration) and 61-97% (coagulation/flocculation) for the above-mentioned pollutants (metals, PAH and PCB).

Betatron radiation based diagnostics for plasma wakefield accelerated electron beams at the SPARC-LAB test facility

Energy Technology Data Exchange (ETDEWEB)

Shpakov, V.; Anania, M.P.; Biagioni, A.; Chiadroni, E. [INFN - LNF, via Enrico Fermi 40, 00044 Frascati (Italy); Cianchi, A. [INFN - LNF, via Enrico Fermi 40, 00044 Frascati (Italy); “Tor Vergata” University, via della Ricerca Scientifica 1, 00133 Rome (Italy); Curcio, A. [INFN - LNF, via Enrico Fermi 40, 00044 Frascati (Italy); Dabagov, S. [INFN - LNF, via Enrico Fermi 40, 00044 Frascati (Italy); P.N. Lebedev Physical Institute RAS, Leninskiy Prospekt 53, 119991 Moscow (Russian Federation); NRNU “MEPhI”, Kashirskoe highway 31, 115409 Moscow (Russian Federation); Ferrario, M.; Filippi, F. [INFN - LNF, via Enrico Fermi 40, 00044 Frascati (Italy); Marocchino, A. [Dipartimento SBAI Universitá di Roma ‘La Sapienza’, via Antonio Scarpa 14/16, 00161 Rome (Italy); Paroli, B. [INFN - MI, via Celoria 16, 20133 Milan (Italy); Pompili, R. [INFN - LNF, via Enrico Fermi 40, 00044 Frascati (Italy); Rossi, A.R. [INFN - MI, via Celoria 16, 20133 Milan (Italy); Zigler, A. [Racah Institute of Physics Hebrew University of Jerusalem (Israel)

2016-09-01

Recent progress with wake-field acceleration has shown a great potential in providing high gradient acceleration fields, while the quality of the beams remains relatively poor. Precise knowledge of the beam size at the exit from the plasma and matching conditions for the externally injected beams are the key for improvement of beam quality. Betatron radiation emitted by the beam during acceleration in the plasma is a powerful tool for the transverse beam size measurement, being also non-intercepting. In this work we report on the technical solutions chosen at SPARC-LAB for such diagnostics tool, along with expected parameters of betatron radiation. - Highlights: • The betatron radiation parameters in SPARC-LAB wakefiled experiments were studied. • The differences with betatron radiation in other wake-field experiments were highlighted. • The solution for betatron radiation detection was investigated.

Betatron radiation based diagnostics for plasma wakefield accelerated electron beams at the SPARC-LAB test facility

International Nuclear Information System (INIS)

Shpakov, V.; Anania, M.P.; Biagioni, A.; Chiadroni, E.; Cianchi, A.; Curcio, A.; Dabagov, S.; Ferrario, M.; Filippi, F.; Marocchino, A.; Paroli, B.; Pompili, R.; Rossi, A.R.; Zigler, A.

2016-01-01

Recent progress with wake-field acceleration has shown a great potential in providing high gradient acceleration fields, while the quality of the beams remains relatively poor. Precise knowledge of the beam size at the exit from the plasma and matching conditions for the externally injected beams are the key for improvement of beam quality. Betatron radiation emitted by the beam during acceleration in the plasma is a powerful tool for the transverse beam size measurement, being also non-intercepting. In this work we report on the technical solutions chosen at SPARC-LAB for such diagnostics tool, along with expected parameters of betatron radiation. - Highlights: • The betatron radiation parameters in SPARC-LAB wakefiled experiments were studied. • The differences with betatron radiation in other wake-field experiments were highlighted. • The solution for betatron radiation detection was investigated.

Experiential Learning of Digital Communication Using LabVIEW

Science.gov (United States)

Zhan, Wei; Porter, Jay R.; Morgan, Joseph A.

2014-01-01

This paper discusses the design and implementation of laboratories and course projects using LabVIEW in an instrumentation course. The pedagogical challenge is to enhance students' learning of digital communication using LabVIEW. LabVIEW was extensively used in the laboratory sessions, which better prepared students for the course projects. Two…

Application of LabVIEW in SSRF digital power supply development

International Nuclear Information System (INIS)

Tang Junlong; Chen Huanguang; Ke Xinhua; Chinese Academy of Science, Beijing; Xu Ruinian; Li Deming

2007-01-01

During development of the Shanghai Synchrotron Radiation Facility (SSRF) digital power supply, a digital pulse-width modulator (PWM) directly controls the power circuit insulated gate bipolar transistor (IGBT). A program in LabVIEW language has been developed to perform computer control and monitor for the digital PS via serial communication (RS232). The program provides a friendly user interface to the digital PS that makes it easy to observe its behavior and modify its parameters. Another program, also in LabVIEW language, has been developed to test long term stability of the digital power supply and store the experimental data via extremely precise Keithley instrument and computer. The experimental data are stored in an Excel file which can be processed and analyzed in the future. (authors)

Prevalence of Pre-Analytical Errors in Clinical Chemistry Diagnostic Labs in Sulaimani City of Iraqi Kurdistan.

Science.gov (United States)

Najat, Dereen

2017-01-01

Laboratory testing is roughly divided into three phases: a pre-analytical phase, an analytical phase and a post-analytical phase. Most analytical errors have been attributed to the analytical phase. However, recent studies have shown that up to 70% of analytical errors reflect the pre-analytical phase. The pre-analytical phase comprises all processes from the time a laboratory request is made by a physician until the specimen is analyzed at the lab. Generally, the pre-analytical phase includes patient preparation, specimen transportation, specimen collection and storage. In the present study, we report the first comprehensive assessment of the frequency and types of pre-analytical errors at the Sulaimani diagnostic labs in Iraqi Kurdistan. Over 2 months, 5500 venous blood samples were observed in 10 public diagnostic labs of Sulaimani City. The percentages of rejected samples and types of sample inappropriateness were evaluated. The percentage of each of the following pre-analytical errors were recorded: delay in sample transportation, clotted samples, expired reagents, hemolyzed samples, samples not on ice, incorrect sample identification, insufficient sample, tube broken in centrifuge, request procedure errors, sample mix-ups, communication conflicts, misinterpreted orders, lipemic samples, contaminated samples and missed physician's request orders. The difference between the relative frequencies of errors observed in the hospitals considered was tested using a proportional Z test. In particular, the survey aimed to discover whether analytical errors were recorded and examine the types of platforms used in the selected diagnostic labs. The analysis showed a high prevalence of improper sample handling during the pre-analytical phase. In appropriate samples, the percentage error was as high as 39%. The major reasons for rejection were hemolyzed samples (9%), incorrect sample identification (8%) and clotted samples (6%). Most quality control schemes at Sulaimani

Prevalence of Pre-Analytical Errors in Clinical Chemistry Diagnostic Labs in Sulaimani City of Iraqi Kurdistan.

Directory of Open Access Journals (Sweden)

Dereen Najat

Full Text Available Laboratory testing is roughly divided into three phases: a pre-analytical phase, an analytical phase and a post-analytical phase. Most analytical errors have been attributed to the analytical phase. However, recent studies have shown that up to 70% of analytical errors reflect the pre-analytical phase. The pre-analytical phase comprises all processes from the time a laboratory request is made by a physician until the specimen is analyzed at the lab. Generally, the pre-analytical phase includes patient preparation, specimen transportation, specimen collection and storage. In the present study, we report the first comprehensive assessment of the frequency and types of pre-analytical errors at the Sulaimani diagnostic labs in Iraqi Kurdistan.Over 2 months, 5500 venous blood samples were observed in 10 public diagnostic labs of Sulaimani City. The percentages of rejected samples and types of sample inappropriateness were evaluated. The percentage of each of the following pre-analytical errors were recorded: delay in sample transportation, clotted samples, expired reagents, hemolyzed samples, samples not on ice, incorrect sample identification, insufficient sample, tube broken in centrifuge, request procedure errors, sample mix-ups, communication conflicts, misinterpreted orders, lipemic samples, contaminated samples and missed physician's request orders. The difference between the relative frequencies of errors observed in the hospitals considered was tested using a proportional Z test. In particular, the survey aimed to discover whether analytical errors were recorded and examine the types of platforms used in the selected diagnostic labs.The analysis showed a high prevalence of improper sample handling during the pre-analytical phase. In appropriate samples, the percentage error was as high as 39%. The major reasons for rejection were hemolyzed samples (9%, incorrect sample identification (8% and clotted samples (6%. Most quality control schemes

Using OpenTarget to Generate Potential Countermeasures for Long-Term Space Exposure from Data Available on GeneLab

Science.gov (United States)

Beheshti, Afshin

2018-01-01

GeneLab as a general tool for the scientific community; Utilizing GeneLab datasets to generate hypothesis and determining potential biological targets against health risks due to long-term space missions; How can OpenTarget be used to discover novel drugs to test as countermeasures that can be utilized by astronauts.

Overview of the CLEF 2016 Social Book Search Lab

DEFF Research Database (Denmark)

Koolen, Marijn; Bogers, Toine; Gäde, Maria

2016-01-01

systems. The aim of the Interactive Track is to develop user interfaces that support users through each stage during complex search tasks and to investigate how users exploit professional metadata and user-generated content. The Mining Track focuses on detecting and linking book titles in online book......The Social Book Search (SBS) Lab investigates book search in scenarios where users search with more than just a query, and look for more than objective metadata. Real-world information needs are generally complex, yet almost all research focuses instead on either relatively simple search based...... on queries, or on profile-based recommendation. The goal is to research and develop techniques to support users in complex book search tasks. The SBS Lab has three tracks. The aim of the Suggestion Track is to develop test collections for evaluating ranking effectiveness of book retrieval and recommender...

Baseball Physics: A New Mechanics Lab

Science.gov (United States)

Wagoner, Kasey; Flanagan, Daniel

2018-05-01

The game of baseball provides an interesting laboratory for experimenting with mechanical phenomena (there are many good examples in The Physics Teacher, available on Professor Alan Nathan's website, and discussed in Physics of Baseball & Softball). We have developed a lab, for an introductory-level physics course, that investigates many of these phenomena. The lab uses inexpensive, readily available equipment such as wooden baseball bats, baseballs, and actual Major League Baseball data. By the end of the lab, students have revisited many concepts they learned earlier in the semester and come away with an understanding of how to put seemingly disparate ideas together to analyze a fun sport.

Alpha-fetoprotein (AFP) Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/alphafetoproteinafptest.html Alpha-fetoprotein (AFP) Test To use the sharing features on this page, please enable JavaScript. What is an Alpha-fetoprotein (AFP) Test? Alpha-fetoprotein (AFP) is a protein ...

Living Lab voor Informatiemanagement in Agri-Food

NARCIS (Netherlands)

Wolfert, J.

2010-01-01

Het Living Lab is een specifieke open innovatie aanpak waarbij in feite het laboratorium naar de praktijk wordt gebracht. het Agri-Food Living lab is een informatiemanagementsysteem specifiek voor de agri-food sector.

Integrated lab-on-chip biosensing systems based on magnetic particle actuation : a comprehensive review

NARCIS (Netherlands)

Reenen, van A.; Jong, de A.M.; Toonder, den J.M.J.; Prins, M.W.J.

2014-01-01

The demand for easy to use and cost effective medical technologies inspires scientists to develop inno-vative lab-on-chip technologies for in-vitro diagnostic testing. To fulfill the medical needs, the tests should be rapid, sensitive, quantitative, miniaturizable, and need to integrate all steps

Incorporating inquiry and the process of science into introductory astronomy labs at the George Washington University

Science.gov (United States)

Cobb, Bethany E.

2018-01-01

Since 2013, the Physics Department at GWU has used student-centered active learning in the introductory astronomy course “Introduction to the Cosmos.” Class time is spent in groups on questions, math problems, and hands-on activities, with multiple instructors circulating to answer questions and engage with the students. The students have responded positively to this active-learning. Unfortunately, in transitioning to active-learning there was no time to rewrite the labs. Very quickly, the contrast between the dynamic classroom and the traditional labs became apparent. The labs were almost uniformly “cookie-cutter” in that the procedure and analysis were specified step-by-step and there was just one right answer. Students rightly criticized the labs for lacking a clear purpose and including busy-work. Furthermore, this class fulfills the GWU scientific reasoning general education requirement and thus includes learning objectives related to understanding the scientific method, testing hypotheses with data, and considering uncertainty – but the traditional labs did not require these skills. I set out to rejuvenate the lab sequence by writing new inquiry labs based on both topic-specific and scientific reasoning learning objectives. While inquiry labs can be challenging for the students, as they require active thinking and creativity, these labs engage the students more thoroughly in the scientific process. In these new labs, whenever possible, I include real astronomical data and ask the students to use digital tools (SDSS SkyServer, SOHO archive) as if they are real astronomers. To allow students to easily plot, manipulate and analyze data, I built “smart” Excel files using formulas, dropdown menus and macros. The labs are now much more authentic and thought-provoking. Whenever possible, students independently develop questions, hypotheses, and procedures and the scientific method is “scaffolded” over the semester by providing more guidance in the

Hydrogel Beads: The New Slime Lab?

Science.gov (United States)

Brockway, Debra; Libera, Matthew; Welner, Heidi

2011-01-01

Creating slime fascinates students. Unfortunately, though intrigue is at its peak, the educational aspect of this activity is often minimal. This article describes a chemistry lab that closely relates to the slime lab and allows high school students to explore the concepts of chemical bonding, properties, and replacement reactions. It involves the…

MethLAB: a graphical user interface package for the analysis of array-based DNA methylation data.

Science.gov (United States)

Kilaru, Varun; Barfield, Richard T; Schroeder, James W; Smith, Alicia K; Conneely, Karen N

2012-03-01

Recent evidence suggests that DNA methylation changes may underlie numerous complex traits and diseases. The advent of commercial, array-based methods to interrogate DNA methylation has led to a profusion of epigenetic studies in the literature. Array-based methods, such as the popular Illumina GoldenGate and Infinium platforms, estimate the proportion of DNA methylated at single-base resolution for thousands of CpG sites across the genome. These arrays generate enormous amounts of data, but few software resources exist for efficient and flexible analysis of these data. We developed a software package called MethLAB (http://genetics.emory.edu/conneely/MethLAB) using R, an open source statistical language that can be edited to suit the needs of the user. MethLAB features a graphical user interface (GUI) with a menu-driven format designed to efficiently read in and manipulate array-based methylation data in a user-friendly manner. MethLAB tests for association between methylation and relevant phenotypes by fitting a separate linear model for each CpG site. These models can incorporate both continuous and categorical phenotypes and covariates, as well as fixed or random batch or chip effects. MethLAB accounts for multiple testing by controlling the false discovery rate (FDR) at a user-specified level. Standard output includes a spreadsheet-ready text file and an array of publication-quality figures. Considering the growing interest in and availability of DNA methylation data, there is a great need for user-friendly open source analytical tools. With MethLAB, we present a timely resource that will allow users with no programming experience to implement flexible and powerful analyses of DNA methylation data.

E-Labs - Learning with Authentic Data

Energy Technology Data Exchange (ETDEWEB)

Bardeen, Marjorie G. [Fermilab; Wayne, Mitchell [Notre Dame U.

2016-01-01

the success teachers have had providing an opportunity for students to: • Organize and conduct authentic research. • Experience the environment of scientific collaborations. • Possibly make real contributions to a burgeoning scientific field. We've created projects that are problem-based, student driven and technology dependent. Students reach beyond classroom walls to explore data with other students and experts and share results, publishing original work to a worldwide audience. Students can discover and extend the research of other students, modeling the processes of modern, large-scale research projects. From start to finish e-Labs are student-led, teacher-guided projects. Students need only a Web browser to access computing techniques employed by professional researchers. A Project Map with milestones allows students to set the research plan rather than follow a step-by-step process common in other online projects. Most importantly, e-Labs build the learning experience around the students' own questions and let them use the very tools that scientists use. Students contribute to and access shared data, most derived from professional research databases. They use common analysis tools, store their work and use metadata to discover, replicate and confirm the research of others. This is where real scientific collaboration begins. Using online tools, students correspond with other research groups, post comments and questions, prepare summary reports, and in general participate in the part of scientific research that is often left out of classroom experiments. Teaching tools such as student and teacher logbooks, pre- and post-tests and an assessment rubric aligned with learner outcomes help teachers guide student work. Constraints on interface designs and administrative tools such as registration databases give teachers the "one-stop-shopping" they seek for multiple e-Labs. Teaching and administrative tools also allow us to track usage and assess the

CT and MRI slice separation evaluation by LabView developed software.

Science.gov (United States)

Acri, Giuseppe; Testagrossa, Barbara; Sestito, Angela; Bonanno, Lilla; Vermiglio, Giuseppe

2018-02-01

The efficient use of Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) equipment necessitates establishing adequate quality-control (QC) procedures. In particular, the accuracy of slice separation, during multislices acquisition, requires scan exploration of phantoms containing test objects. To simplify such procedures, a novel phantom and a computerised LabView-based procedure have been devised, enabling determination the midpoint of full width at half maximum (FWHM) in real time while the distance from the profile midpoint of two progressive images is evaluated and measured. The results were compared with those obtained by processing the same phantom images with commercial software. To validate the proposed methodology the Fisher test was conducted on the resulting data sets. In all cases, there was no statistically significant variation between the commercial procedure and the LabView one, which can be used on any CT and MRI diagnostic devices. Copyright © 2017. Published by Elsevier GmbH.

Calcium Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Calcium, Serum; Calcium and Phosphates, Urine; ...

Blood Glucose Test: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Glucose Monitoring; 317 p. National Cancer ...

MPV Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Platelet Count; p. 419. Important Physician ...

Albumin Blood Test: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Albumin; 32 p. Johns Hopkins Medicine [ ...

BioLab: Using Yeast Fermentation as a Model for the Scientific Method.

Science.gov (United States)

Pigage, Helen K.; Neilson, Milton C.; Greeder, Michele M.

This document presents a science experiment demonstrating the scientific method. The experiment consists of testing the fermentation capabilities of yeasts under different circumstances. The experiment is supported with computer software called BioLab which demonstrates yeast's response to different environments. (YDS)

CERN Technical Training 2006: LabVIEW Course Sessions (September-December 2006)

CERN Multimedia

2006-01-01

The following LabVIEW course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with National Instruments (CH): LabVIEW Basics 1 (course in English): 11-13.9.2006 (3 days, only 3 places available) LabVIEW Basics 2 (course in English): 14-15.9.2006 (2 days) LabVIEW: Working efficiently with LabVIEW 8 (course in English): 18.9.2006 (1 day) **NEW COURSE** LabVIEW Application Development (course in English): 13-15.11.2006 (3 days. Pre-requisite: LabVIEW Basics I ans II, or equivalent experience) LabVIEW Advanced Programming (course in English): 16-17.11.2006 (2 days. Pre-requisite: LabVIEW Application Development, or equivalent experience) LabVIEW Base 1 (course in French): 4-6.12.2006 (3 days, only 1 place available) LabVIEW Base 2 (course in French): 7-8.12.2006 (2 days) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the cour...

Coagulation Factor Tests: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Coagulation Factor Assay; 156–7 p. ...

Bone Marrow Test: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Bone Marrow Aspiration and Biopsy; 99– ...

THE STORY OF THE BC FAMILY JUSTICE INNOVATION LAB

Directory of Open Access Journals (Sweden)

Jane Morley

2017-12-01

Full Text Available Many in the justice system know that fundamental change is needed but few know the best way to do it.  Previous attempts using strategic planning approaches have not achieved meaningful change.  Something different is needed.  The BC Family Justice Innovation Lab (the Lab is experimenting with a different approach drawing on complexity science, the experience of other jurisdictions and disciplines and incorporating human-centred design as a way of focusing on the well-being of families going through the transition of separation and divorce.  This article is the story of the first few years of the Lab’s life.  It has been a fascinating and challenging path so far, and it remains to be seen whether it will ultimately succeed. The story is offered so that others with similar ambitions can learn from the Lab’s experience – its successes and its failures.  It is the nature and strength of stories that the reader will take from them what they will. For the authors, one overriding theme that emerges from this story is that transforming a complex social system, such as the family justice system in British Columbia, requires embracing the complexity of paradox and refusing to be defeated by the tension of opposites and a multitude of wicked, unanswerable questions.    Bon nombre d’intervenants du système de justice savent qu’un changement fondamental s’impose, mais peu connaissent la meilleure façon de le réaliser. Dans le passé, l’utilisation d’approches de planification stratégique n’a pas donné les résultats escomptés. Une approche différente est nécessaire. S’inspirant de l’expérience vécue dans d’autres ressorts et d’autres disciplines, le BC Family Justice Innovation Lab (le Lab expérimente actuellement une approche différente fondée sur la science de la complexité, et s’efforce d’intégrer une conception axée sur la personne afin de mettre de l’avant le bien-être des familles �

Virtual Lab for Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

PICOVICI, D.

2008-06-01

Full Text Available This article details an experimental system developed to enhance the education and research in the area of wireless networks technologies. The system referred, as Virtual Lab (VL is primarily targeting first time users or users with limited experience in programming and using wireless sensor networks. The VL enables a set of predefined sensor networks to be remotely accessible and controlled for constructive and time-efficient experimentation. In order to facilitate the user's wireless sensor applications, the VL is using three main components: a a Virtual Lab Motes (VLM, representing the wireless sensor, b a Virtual Lab Client (VLC, representing the user's tool to interact with the VLM and c a Virtual Lab Server (VLS representing the software link between the VLM and VLC. The concept has been proven using the moteiv produced Tmote Sky modules. Initial experimental use clearly demonstrates that the VL approach reduces dramatically the learning curve involved in programming and using the associated wireless sensor nodes. In addition the VL allows the user's focus to be directed towards the experiment and not towards the software programming challenges.

RemoteLabs Platform

Directory of Open Access Journals (Sweden)

Nils Crabeel

2012-03-01

Full Text Available This paper reports on a first step towards the implementation of a framework for remote experimentation of electric machines – the RemoteLabs platform. This project was focused on the development of two main modules: the user Web-based and the electric machines interfaces. The Web application provides the user with a front-end and interacts with the back-end – the user and experiment persistent data. The electric machines interface is implemented as a distributed client server application where the clients, launched by the Web application, interact with the server modules located in platforms physically connected the electric machines drives. Users can register and authenticate, schedule, specify and run experiments and obtain results in the form of CSV, XML and PDF files. These functionalities were successfully tested with real data, but still without including the electric machines. This inclusion is part of another project scheduled to start soon.

Beyond the Usability Lab Conducting Large-scale Online User Experience Studies

CERN Document Server

Albert, William; Tullis, Thomas

2010-01-01

Usability testing and user experience research typically take place in a controlled lab with small groups. While this type of testing is essential to user experience design, more companies are also looking to test large sample sizes to be able compare data according to specific user populations and see how their experiences differ across user groups. But few usability professionals have experience in setting up these studies, analyzing the data, and presenting it in effective ways.  Online usability testing offers the solution by allowing testers to elicit feedback simultaneously from 1,0

a Matter of Confidence: Gender Differences in Attitudes Toward Engaging in Lab and Course Work in Undergraduate Engineering

Science.gov (United States)

Micari, Marina; Pazos, Pilar; Hartmann, Mitra J. Z.

Although there has been a great deal of research on women's experiences in engineering study, there has been little attempt to connect experiential factors to performance in both course and lab. This two-phase study investigated gender differences in undergraduates' experiences in a fluid mechanics course as well as the relationship between experiential factors and student performance in that course. One hundred forty-seven students at a Midwestern research university completed questionnaires related to course experience and perceived engagement. Data were also collected on final grade for 89 students in the second round of data collection. Relative to men, women reported less confidence that they could avoid mistakes in the lab, less experience with mechanical items, less perceived ability in engineering relative to classmates, and less perceived skill in tasks requiring navigation or maneuvering through space. Feelings of engagement were related to grade, but no gender differences were found in either engagement or grade.

Magnetic Viscous Drag for Friction Labs

Science.gov (United States)

Gaffney, Chris; Catching, Adam

2016-01-01

The typical friction lab performed in introductory mechanics courses is usually not the favorite of either the student or the instructor. The measurements are not all that easy to make, and reproducibility is usually a troublesome issue. This paper describes the augmentation of such a friction lab with a study of the viscous drag on a magnet…

Automatic creation of LabVIEW network shared variables

International Nuclear Information System (INIS)

Kluge, T.; Schroeder, H.

2012-01-01

We are in the process of preparing the LabVIEW controlled system components of our Solid State Direct Drive experiments for the integration into a Supervisory Control And Data Acquisition (SCADA) or distributed control system. The predetermined route to this is the generation of LabVIEW network shared variables that can easily be exported by LabVIEW to the SCADA system using OLE for Process Control (OPC) or other means. Many repetitive tasks are associated with the creation of the shared variables and the required code. We are introducing an efficient and inexpensive procedure that automatically creates shared variable libraries and sets default values for the shared variables. Furthermore, LabVIEW controls are created that are used for managing the connection to the shared variable inside the LabVIEW code operating on the shared variables. The procedure takes as input an XML spread-sheet defining the required input. The procedure utilizes XSLT and LabVIEW scripting. In a later state of the project the code generation can be expanded to also create code and configuration files that will become necessary in order to access the shared variables from the SCADA system of choice. (authors)

Microstructural characterization of LaB6-ZrB2 eutectic composites

International Nuclear Information System (INIS)

Wang Shengchang; Wei, W.J.; Zhang Litong

2003-01-01

Detail microstructure of LaB 6 -ZrB 2 composites has been characterized by TEM and HRTEM. The directionally solidified ZrB 2 fibers in LaB 6 matrix near LaB 6 -ZrB 2 eutectics present at least three growing relationship systems. In addition to previous report of [001]LaB 6 / [0001]ZrB 2 relationship, [0 anti 11]LaB 6 / [0001]ZrB 2 and [1 anti 20]LaB 6 / [0001]ZrB 2 . were identified. Different with [001]LaB 6 / [0001]ZrB 2 system, the interfaces of [0 anti 11]LaB 6 / [0001]ZrB 2 and [1 anti 20]LaB 6 / [0001]ZrB 2 . show non-coherent and clean interfaces. There is neither glassy phase nor reaction products found at the interfaces (orig.)

The Pretesting Effect: Do Unsuccessful Retrieval Attempts Enhance Learning?

Science.gov (United States)

Richland, Lindsey E.; Kornell, Nate; Kao, Liche Sean

2009-01-01

Testing previously studied information enhances long-term memory, particularly when the information is successfully retrieved from memory. The authors examined the effect of unsuccessful retrieval attempts on learning. Participants in 5 experiments read an essay about vision. In the test condition, they were asked about embedded concepts before…

Prostate-Specific Antigen (PSA) Test: MedlinePlus Lab Test Information

Science.gov (United States)

... medlineplus.gov/labtests/prostatespecificantigenpsatest.html Prostate-Specific Antigen (PSA) Test To use the sharing features on this ... enable JavaScript. What is a prostate-specific antigen (PSA) test? A prostate-specific antigen (PSA) test measures ...

Flexible HVAC System for Lab or Classroom.

Science.gov (United States)

Friedan, Jonathan

2001-01-01

Discusses an effort to design a heating, ventilation, and air conditioning system flexible enough to accommodate an easy conversion of classrooms to laboratories and dry labs to wet labs. The design's energy efficiency and operations and maintenance are examined. (GR)

The Dynamics and Facilitation of a Living Lab Construct

DEFF Research Database (Denmark)

Brønnum, Louise; Nielsen, Louise Møller

2013-01-01

During the last decade Living Labs have established itself as an attractive innovation approach. Living Labs are an interesting construction because it offers a collaboration platform for dynamic interaction with users in all the project phases. Living Labs frame knowledge about actors in their o...

Lab-scale investigation of Middle-Bosnia coals to achieve high-efficient and clean combustion technology

Directory of Open Access Journals (Sweden)

Smajevic Izet

2014-01-01

Full Text Available This paper describes full lab-scale investigation of Middle-Bosnia coals launched to support selection an appropriate combustion technology and to support optimization of the boiler design. Tested mix of Middle-Bosnia brown coals is projected coal for new co-generation power plant Kakanj Unit 8 (300-450 MWe, EP B&H electricity utility. The basic coal blend consisting of the coals Kakanj: Breza: Zenica at approximate mass ratio of 70:20:10 is low grade brown coal with very high percentage of ash - over 40%. Testing that coal in circulated fluidized bed combustion technique, performed at Ruhr-University Bohum and Doosan Lentjes GmbH, has shown its inconveniency for fluidized bed combustion technology, primarily due to the agglomeration problems. Tests of these coals in PFC (pulverized fuel combustion technology have been performed in referent laboratory at Faculty of Mechanical Engineering of Sarajevo University, on a lab-scale PFC furnace, to provide reliable data for further analysis. The PFC tests results are fitted well with previously obtained results of the burning similar Bosnian coal blends in the PFC dry bottom furnace technique. Combination of the coals shares, the process temperature and the air combustion distribution for the lowest NOx and SO2 emissions was found in this work, provided that combustion efficiency and CO emissions are within very strict criteria, considering specific settlement of lab-scale furnace. Sustainability assessment based on calculation economic and environmental indicators, in combination with Low Cost Planning method, is used for optimization the power plant design. The results of the full lab-scale investigation will help in selection optimal Boiler design, to achieve sustainable energy system with high-efficient and clean combustion technology applied for given coals.

Association between level of suicide risk, characteristics of suicide attempts, and mental disorders among suicide attempters.

Science.gov (United States)

Park, Subin; Lee, Yeeun; Youn, Tak; Kim, Byung Soo; Park, Jong Ik; Kim, Haesoo; Lee, Hyo Chu; Hong, Jin Pyo

2018-04-11

Past attempted suicide is a strong predictor of future suicide risk, but the risk varies among suicide attempters. Hence, it is important to clarify distinguishing features of lifetime attempters with a high level of current suicide risk for efficient preventive management. We compared characteristics of suicide attempts and clinical characteristics among high-, moderate-, and low-risk attempters. Among the total of 6022 participants in the Korean Epidemiologic Catchment Area study, 193 reported a suicide attempt in their lifetime, 36 of which had high, 126 moderate, and 30 low levels of current suicide risk (1 incomplete response). High-risk suicide attempters had more past attempts compared with moderate- and low-risk suicide attempters. Suicide attempts were closely linked to a wide range of psychiatric comorbidities regardless of degree of current level of suicide risk, but the relative risk for having at least one mental disorder was the highest in high-risk attempters. Specifically, the relative risks for depressive disorder, anxiety disorders including obsessive-compulsive disorder and post-traumatic stress disorder, and substance use disorders were higher in high-risk attempters, and relative risk for somatoform disorder was higher in low-risk attempters than others. Our findings indicated that special attention is required for suicide attempters with a history of repeated attempts and current mental disorders, particularly anxiety disorders.

Assessing Usage and Maximizing Finance Lab Impact: A Case Exploration

Science.gov (United States)

Noguera, Magdy; Budden, Michael Craig; Silva, Alberto

2011-01-01

This paper reports the results of a survey conducted to assess students' usage and perceptions of a finance lab. Finance labs differ from simple computer labs as they typically contain data boards, streaming market quotes, terminals and software that allow for real-time financial analyses. Despite the fact that such labs represent significant and…

Development of a LabVIEW-based surface with innovative controls for the control system of the spin-polarized electron test source Photo-CATCH

Energy Technology Data Exchange (ETDEWEB)

Roesch, Heidi Ayse; Enders, Joachim; Espig, Martin; Fritzsche, Yuliya; Wagner, Markus [TU Darmstadt, Institut fuer Kernphysik (Germany)

2016-07-01

Operations of the spin-polarized electron source of the S-DALINAC will be supported by a photo-cathode activation, test and cleaning system, Photo-CATCH. Besides cathode-performance studies, this teststand produces spin-polarized electron bunches from a GaAs photo-cathode that are then transported, manipulated, and characterized by devices in a low-energy beam line. To set and monitor the various components of the beamline, a control system was developed, based on the EPICS framework. As interfaces, LabVIEW was used in combination with a gamepad as a controlling device.

Charpy V, an application in Mat lab

International Nuclear Information System (INIS)

Castillo M, J.A.; Torres V, M.

2003-01-01

The obtained results with the system Charpy V V 1 designed in Mat lab for the estimate of parameters of three mathematical models are shown. The adjustment of data is used to determine the fracture energy, the lateral expansion and the percentage of ductility of steels coming from the reactor vessels of Laguna Verde, Veracruz. The data come from test tubes type Charpy V of irradiated material and not irradiated. To verify our results they were compared with those obtained by General Electric of data coming from the Laguna Verde nuclear power plant. (Author)

Innovative Educational Practice: Using Virtual Labs in the Secondary Classroom

Directory of Open Access Journals (Sweden)

Marcel Satsky Kerr, PhD

2004-07-01

Full Text Available Two studies investigated the effectiveness of teaching science labs online to secondary students. Study 1 compared achievement among students instructed using hands-on Chemistry labs versus those instructed using virtual Chemistry labs (eLabs. Study 2 compared the same groups of students again while both teachers instructed using hands-on Chemistry labs to determine whether teacher or student characteristics may have affected Study 1’s findings. Participants were high school Chemistry students from a Central Texas Independent School District. Results indicated that: students learn science effectively online, schools may experience cost savings from delivering labs online, and students gain valuable technology skills needed later in college and in the workplace.

Designing virtual science labs for the Islamic Academy of Delaware

Science.gov (United States)

AlZahrani, Nada Saeed

Science education is a basic part of the curriculum in modern day classrooms. Instructional approaches to science education can take many forms but hands-on application of theory via science laboratory activities for the learner is common. Not all schools have the resources to provide the laboratory environment necessary for hands-on application of science theory. Some settings rely on technology to provide a virtual laboratory experience instead. The Islamic Academy of Delaware (IAD), a typical community-based organization, was formed to support and meet the essential needs of the Muslim community of Delaware. IAD provides science education as part of the overall curriculum, but cannot provide laboratory activities as part of the science program. Virtual science labs may be a successful model for students at IAD. This study was conducted to investigate the potential of implementing virtual science labs at IAD and to develop an implementation plan for integrating the virtual labs. The literature has shown us that the lab experience is a valuable part of the science curriculum (NBPTS, 2013, Wolf, 2010, National Research Council, 1997 & 2012). The National Research Council (2012) stressed the inclusion of laboratory investigations in the science curriculum. The literature also supports the use of virtual labs as an effective substitute for classroom labs (Babateen, 2011; National Science Teachers Association, 2008). Pyatt and Simms (2011) found evidence that virtual labs were as good, if not better than physical lab experiences in some respects. Although not identical in experience to a live lab, the virtual lab has been shown to provide the student with an effective laboratory experience in situations where the live lab is not possible. The results of the IAD teacher interviews indicate that the teachers are well-prepared for, and supportive of, the implementation of virtual labs to improve the science education curriculum. The investigator believes that with the

Design and Verification of Application Specific Integrated Circuits in a Network of Online Labs

Directory of Open Access Journals (Sweden)

A.Y. Al-Zoubi

2009-08-01

Full Text Available A solution to implement a remote laboratory for testing and designing analog Application-Specific Integrated Circuits of the type (ispPAC10 is presented. The application allows electrical engineering students to access and perform measurements and conduct analog electronics experiments over the internet. PAC-Designer software, running on a Citrix server, is used in the circuit design in which the signals are generated and the responses are acquired by a data acquisition board controlled by LabVIEW. Three interconnected remote labs located in three different continents will be implementing the proposed system.

Moeller polarimeter in the hall a jefferson lab after reconstruction

International Nuclear Information System (INIS)

Pomatsalyuk, R.I.

2016-01-01

The Moller polarimeter in the Hall A of Jefferson Lab was reconstructed in order to expand of the energy range of the polarimeter to measure the polarization of the electron beam with an energy up to 11.5 GeV. The paper de-scribes the main results of the Moller polarimeter testing after reconstruction. The measurements of the electrons polarization were provided by two data acquisition systems operating in parallel. The testing of the shielding insertion of magnetic dipole has been performed. The way to eliminate detected deviations in the operation of polarimeter during test is shown.

Cassandra - WP400 - final report of living lab 2

NARCIS (Netherlands)

Engler, M.; Klievink, A.J.

2014-01-01

This CASSANDRA LL2 final deliverable contains all information regarding the CASSANDRA Living Lab Europe – USA via Bremerhaven including information from two intermediate reports (CASSANDRA D4.21 and D4.22) about the very same Living Lab handed in during runtime of the Living Lab. CASSANDRA Living

Comunicación USB entre aplicaciones desarrolladas en LabVIEW y microcontroladores de Silicon Labs

Directory of Open Access Journals (Sweden)

Julio César Herrera Benítez

2013-06-01

Full Text Available El presente artículo trata sobre la utilización de LabVIEW para establecer comunicación USB con microcontroladores de la familia 8051 de Silicon Laboratories, utilizando un driver desarrollado por dicha compañía. En el documento se incluye una descripción de este driver, así como de las funciones principales que permiten el manejo del mismo, las cuales se encuentran en una biblioteca de enlace dinámico. El artículo contiene además una metodología básica para el uso de estas funciones y una explicación detallada a través de un ejemplo, donde se ilustra como cargar y configurar las mismas con el ambiente de desarrollo LabVIEW. Finalmente se muestran dos ejemplos de la utilización del driver a partir de una biblioteca de funciones USB creada en LabVIEW para la comunicación con un microcontrolador.

USNA DIGITAL FORENSICS LAB

Data.gov (United States)

Federal Laboratory Consortium — To enable Digital Forensics and Computer Security research and educational opportunities across majors and departments. Lab MissionEstablish and maintain a Digital...

Fabrication and Prototyping Lab

Data.gov (United States)

Federal Laboratory Consortium — Purpose: The Fabrication and Prototyping Lab for composite structures provides a wide variety of fabrication capabilities critical to enabling hands-on research and...

An Automatic Lab-on-Disc System for Blood Typing.

Science.gov (United States)

Chang, Yaw-Jen; Fan, Yi-Hua; Chen, Shia-Chung; Lee, Kuan-Hua; Lou, Liao-Yong

2018-04-01

A blood-typing assay is a critical test to ensure the serological compatibility of a donor and an intended recipient prior to a blood transfusion. This article presents a lab-on-disc blood-typing system to conduct a total of eight assays for a patient, including forward-typing tests, reverse-typing tests, and irregular-antibody tests. These assays are carried out in a microfluidic disc simultaneously. A blood-typing apparatus was designed to automatically manipulate the disc. The blood type can be determined by integrating the results of red blood cell (RBC) agglutination in the microchannels. The experimental results of our current 40 blood samples show that the results agree with those examined in the hospital. The accuracy reaches 97.5%.

Mechanisms of Action Contributing to Reductions in Suicide Attempts Following Brief Cognitive Behavioral Therapy for Military Personnel: A Test of the Interpersonal-Psychological Theory of Suicide.

Science.gov (United States)

Bryan, Craig J; Wood, David S; May, Alexis; Peterson, Alan L; Wertenberger, Evelyn; Rudd, M David

2018-01-01

Brief cognitive behavioral therapy (BCBT) is associated with significant reductions in suicide attempts among military personnel. However, the underlying mechanisms of action contributing to reductions in suicide attempts in effective psychological treatments remain largely unknown. The present study conducted a secondary analysis of a randomized controlled trial of BCBT versus treatment as usual (TAU) to examine the mechanisms of action hypothesized by the interpersonal-psychological theory of suicide (IPT): perceived burdensomeness, thwarted belongingness, and fearlessness about death. In a sample of 152 active duty U.S. Army personnel with recent suicide ideation or attempts, there were significantly fewer suicide attempts in BCBT, but there were no differences between treatment groups from baseline to 6 months postbaseline on any of the 3 IPT constructs or their interactions. Tests of the moderated mediation failed to support an indirect effect for the IPT model, regardless of which IPT variables were specified as mediators or moderators. Results suggest that the IPT's hypothesized mechanisms of action do not account for reductions in suicide attempts in BCBT. Implications for clinical practice and research are discussed.

Orion FSW V and V and Kedalion Engineering Lab Insight

Science.gov (United States)

Mangieri, Mark L.

2010-01-01

NASA, along with its prime Orion contractor and its subcontractor s are adapting an avionics system paradigm borrowed from the manned commercial aircraft industry for use in manned space flight systems. Integrated Modular Avionics (IMA) techniques have been proven as a robust avionics solution for manned commercial aircraft (B737/777/787, MD 10/90). This presentation will outline current approaches to adapt IMA, along with its heritage FSW V&V paradigms, into NASA's manned space flight program for Orion. NASA's Kedalion engineering analysis lab is on the forefront of validating many of these contemporary IMA based techniques. Kedalion has already validated many of the proposed Orion FSW V&V paradigms using Orion's precursory Flight Test Article (FTA) Pad Abort 1 (PA-1) program. The Kedalion lab will evolve its architectures, tools, and techniques in parallel with the evolving Orion program.

Modifying Cookbook Labs.

Science.gov (United States)

Clark, Robert, L.; Clough, Michael P.; Berg, Craig A.

2000-01-01

Modifies an extended lab activity from a cookbook approach for determining the percent mass of water in copper sulfate pentahydrate crystals to one which incorporates students' prior knowledge, engenders active mental struggling with prior knowledge and new experiences, and encourages metacognition. (Contains 12 references.) (ASK)

LabVIEW Library to EPICS Channel Access

CERN Document Server

Liyu, Andrei; Thompson, Dave H

2005-01-01

The Spallation Neutron Source (SNS) accelerator systems will deliver a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron scattering research. The accelerator complex consists of a 1 GeV linear accelerator, an accumulator ring and associated transport lines. The SNS diagnostics platform is PC-based and will run Windows for its OS and LabVIEW as its programming language. Data acquisition hardware will be based on PCI cards. There will be about 300 rack-mounted computers. The Channel Access (CA) protocol of the Experimental Physics and Industrial Control System (EPICS) is the SNS control system communication standard. This paper describes the approaches, implementation, and features of LabVIEW library to CA for Windows, Linux, and Mac OS X. We also discuss how the library implements the asynchronous CA monitor routine using LabVIEW's occurrence mechanism instead of a callback function (which is not available in LabVIEW). The library is used to acquire accelerator data and applications have been ...

Clothing Systems Design Lab

Data.gov (United States)

Federal Laboratory Consortium — The Clothing Systems Design Lab houses facilities for the design and rapid prototyping of military protective apparel.Other focuses include: creation of patterns and...

[The research in a foot pressure measuring system based on LabVIEW].

Science.gov (United States)

Li, Wei; Qiu, Hong; Xu, Jiang; He, Jiping

2011-01-01

This paper presents a system of foot pressure measuring system based on LabVIEW. The designs of hardware and software system are figured out. LabVIEW is used to design the application interface for displaying plantar pressure. The system can realize the plantar pressure data acquisition, data storage, waveform display, and waveform playback. It was also shown that the testing results of the system were in line with the changing trend of normal gait, which conformed to human system engineering theory. It leads to the demonstration of system reliability. The system gives vivid and visual results, and provides a new method of how to measure foot-pressure and some references for the design of Insole System.

Plasma density characterization at SPARC-LAB through Stark broadening of Hydrogen spectral lines

Energy Technology Data Exchange (ETDEWEB)

Filippi, F., E-mail: francesco.filippi@roma1.infn.it [Dipartimento di Scienze di Base e Applicate per l' Ingegneria (SBAI), ‘Sapienza’ Università di Roma, Via A. Scarpa 14-16, 00161 Roma (Italy); INFN-Roma1, Piazzale Aldo Moro, 2 00161 Roma (Italy); Anania, M.P.; Bellaveglia, M.; Biagioni, A.; Chiadroni, E. [Laboratori Nazionali di Frascati, INFN, Via E. Fermi, Frascati (Italy); Cianchi, A. [Dipartimento di Fisica, Universitá di Roma Tor Vergata, Via della Ricerca Scientifica 1, 00133 Roma (Italy); Di Giovenale, D.; Di Pirro, G.; Ferrario, M. [Laboratori Nazionali di Frascati, INFN, Via E. Fermi, Frascati (Italy); Mostacci, A.; Palumbo, L. [Dipartimento di Scienze di Base e Applicate per l' Ingegneria (SBAI), ‘Sapienza’ Università di Roma, Via A. Scarpa 14-16, 00161 Roma (Italy); INFN-Roma1, Piazzale Aldo Moro, 2 00161 Roma (Italy); Pompili, R.; Shpakov, V.; Vaccarezza, C.; Villa, F. [Laboratori Nazionali di Frascati, INFN, Via E. Fermi, Frascati (Italy); Zigler, A. [Hebrew University of Jerusalem, Jerusalem 91904 (Israel)

2016-09-01

Plasma-based acceleration techniques are of great interest for future, compact accelerators due to their high accelerating gradient. Both particle-driven and laser-driven Plasma Wakefield Acceleration experiments are foreseen at the SPARC-LAB Test Facility (INFN National Laboratories of Frascati, Italy), with the aim to accelerate high-brightness electron beams. In order to optimize the efficiency of the acceleration in the plasma and preserve the quality of the accelerated beam, the knowledge of the plasma electron density is mandatory. The Stark broadening of the Hydrogen spectral lines is one of the candidates used to characterize plasma density. The implementation of this diagnostic for plasma-based experiments at SPARC-LAB is presented. - Highlights: • Stark broadening of Hydrogen lines has been measured to determine plasma density. • Plasma density diagnostic tool for plasma-based experiments at SPARC-LAB is presented. • Plasma density in tapered laser triggered ablative capillary discharge was measured. • Results of plasma density measurements in ablative capillaries are shown.

Plasma density characterization at SPARC-LAB through Stark broadening of Hydrogen spectral lines

International Nuclear Information System (INIS)

Filippi, F.; Anania, M.P.; Bellaveglia, M.; Biagioni, A.; Chiadroni, E.; Cianchi, A.; Di Giovenale, D.; Di Pirro, G.; Ferrario, M.; Mostacci, A.; Palumbo, L.; Pompili, R.; Shpakov, V.; Vaccarezza, C.; Villa, F.; Zigler, A.

2016-01-01

Plasma-based acceleration techniques are of great interest for future, compact accelerators due to their high accelerating gradient. Both particle-driven and laser-driven Plasma Wakefield Acceleration experiments are foreseen at the SPARC-LAB Test Facility (INFN National Laboratories of Frascati, Italy), with the aim to accelerate high-brightness electron beams. In order to optimize the efficiency of the acceleration in the plasma and preserve the quality of the accelerated beam, the knowledge of the plasma electron density is mandatory. The Stark broadening of the Hydrogen spectral lines is one of the candidates used to characterize plasma density. The implementation of this diagnostic for plasma-based experiments at SPARC-LAB is presented. - Highlights: • Stark broadening of Hydrogen lines has been measured to determine plasma density. • Plasma density diagnostic tool for plasma-based experiments at SPARC-LAB is presented. • Plasma density in tapered laser triggered ablative capillary discharge was measured. • Results of plasma density measurements in ablative capillaries are shown.

Attempted suicide in the elderly: characteristics of suicide attempters 70 years and older and a general population comparison group.

Science.gov (United States)

Wiktorsson, Stefan; Runeson, Bo; Skoog, Ingmar; Ostling, Svante; Waern, Margda

2010-01-01

To identify factors associated with attempted suicide in the elderly. Social, psychological, and psychiatric characteristics were compared in suicide attempters (70 years and older) and a representative population sample. Emergency departments at five hospitals in western Sweden and a representative sample of the elderly population. Persons with Mini Mental State Examination (MMSE) score age 80 years). Comparison subjects matched for gender and age group (N = 408) were randomly selected among participants in our general population studies. Symptoms were rated with identical instruments in cases and comparison subjects. The examination included the MMSE and tests of short- and long-term memory, abstract thinking, aphasia, apraxia, and agnosia. Depressive symptomatology was measured using the Montgomery-Asberg Depression Rating Scale, and major and minor depressions were diagnosed according to Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, using symptom algorithms. Factors associated with attempted suicide included being unmarried, living alone, low education level, history of psychiatric treatment, and previous suicide attempt. There was no association with dementia. Odds ratios were increased for both major (odds ratio [OR]: 47.4, 95% confidence interval [CI]: 19.1-117.7) and minor (OR: 2.6, 95% CI: 1.5-4.7) depressions. An association was observed between perceived loneliness and attempted suicide; this relationship was independent of depression (OR: 2.8, 95% CI: 1.3-6.1). Observed associations mirrored those previously shown for completed suicide. Results may help to inform clinical decisions regarding suicide risk evaluation in this vulnerable and growing age group.

LIDAR Research & Development Lab

Data.gov (United States)

Federal Laboratory Consortium — The LIDAR Research and Development labs are used to investigate and improve LIDAR components such as laser sources, optical signal detectors and optical filters. The...

Triglycerides Test

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Triglycerides; 491–2 p. Lab Tests ...

From road to lab to math: the co-evolution of technological, regulatory, and organizational innovations for automotive crash testing.

Science.gov (United States)

Leonardi, Paul M

2010-04-01

Today, in the midst of economic crisis, senior executives at US automakers and influential industry analysts frequently reflect on the progression that safety testing has taken from the crude trials done on the road, to controlled laboratory experiments, and to today's complex math-based simulation models. They use stories of this seemingly linear and natural sequence to justify further investment in simulation technologies. The analysis presented in this paper shows that change in the structures of automakers' organizations co-evolved with regulations specifying who was at fault in vehicle impacts, how vehicles should be built to withstand the force of an impact, and how testing should be done to assure that vehicles met those requirements. Changes in the regulatory environment were bolstered by new theories about crash test dynamics and changing technologies with which to test those theories. Thus, as new technological and regulatory innovations co-evolved with innovations in organizational structuring, ideas about how to best conduct crash tests shifted and catalyzed new cycles of technological, regulatory, and organizational innovation. However, this co-evolutionary story tells us that the move from road to lab to math was not natural or linear as today's managerial rhetoric would have us believe. Rather, the logic of math-based simulation was the result of technological, regulatory and organizational changes that created an industry-wide ideology that supported the move toward math while making it appear natural within the shifting structure of the industry.

German lab wins linear collider contest

CERN Multimedia

Cartlidge, Edwin

2004-01-01

Particle physicists have chosen to base the proposed International Linear Collider on superconducting technology developed by an international collaboration centred on the DESY lab in Germany. The superconducting approach was chosen by an internatinal panel ahead of a rival technology developed at Stanford in the US and the KEK lab in Japan. The eagerly-awaited decision was announced at the International Conference on High Energy Physics in Beijing today (½ page)

S'Cool LAB Summer CAMP 2017

CERN Multimedia

Woithe, Julia

2017-01-01

The S’Cool LAB Summer CAMP is an opportunity for high-school students (aged 16-19) from all around the world to spend 2 weeks exploring the fascinating world of particle physics. The 24 selected participants spend their summer at S’Cool LAB, CERN’s hands-on particle physics learning laboratory, for an epic programme of lectures and tutorials, team research projects, visits of CERN’s research installations, and social activities.

Intrapersonal positive future thinking predicts repeat suicide attempts in hospital-treated suicide attempters.

Science.gov (United States)

O'Connor, Rory C; Smyth, Roger; Williams, J Mark G

2015-02-01

Although there is clear evidence that low levels of positive future thinking (anticipation of positive experiences in the future) and hopelessness are associated with suicide risk, the relationship between the content of positive future thinking and suicidal behavior has yet to be investigated. This is the first study to determine whether the positive future thinking-suicide attempt relationship varies as a function of the content of the thoughts and whether positive future thinking predicts suicide attempts over time. A total of 388 patients hospitalized following a suicide attempt completed a range of clinical and psychological measures (depression, hopelessness, suicidal ideation, suicidal intent and positive future thinking). Fifteen months later, a nationally linked database was used to determine who had been hospitalized again after a suicide attempt. During follow-up, 25.6% of linked participants were readmitted to hospital following a suicide attempt. In univariate logistic regression analyses, previous suicide attempts, suicidal ideation, hopelessness, and depression-as well as low levels of achievement, low levels of financial positive future thoughts, and high levels of intrapersonal (thoughts about the individual and no one else) positive future thoughts predicted repeat suicide attempts. However, only previous suicide attempts, suicidal ideation, and high levels of intrapersonal positive future thinking were significant predictors in multivariate analyses. Positive future thinking has predictive utility over time; however, the content of the thinking affects the direction and strength of the positive future thinking-suicidal behavior relationship. Future research is required to understand the mechanisms that link high levels of intrapersonal positive future thinking to suicide risk and how intrapersonal thinking should be targeted in treatment interventions. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

CERN Technical Training 2006: LabVIEW Course Sessions (September-December 2006)

CERN Multimedia

2006-01-01

The following LabVIEW course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with National Instruments (CH): LabVIEW Basics 1 (course in English): 11-13.9.2006 (3 days, only 3 places available) (course in English): 14-15.9.2006 (2 days) LabVIEW: Working efficiently with LabVIEW 8 (course in English): 18.9.2006 (1 day) **NEW COURSE** LabVIEW Application Development (course in English): 13-15.11.2006 (3 days. Pre-requisite: LabVIEW Basics I ans II, or equivalent experience) LabVIEW Advanced Programming (course in English): 16-17.11.2006 (2 days. Pre-requisite: LabVIEW Application Development, or equivalent experience) LabVIEW Base 1 (course in French): 4-6.12.2006 (3 days, only 1 place available) LabVIEW Base 2 (course in French): 7-8.12.2006 (2 days) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO,...

Reference-based pricing: an evidence-based solution for lab services shopping.

Science.gov (United States)

Melton, L Doug; Bradley, Kent; Fu, Patricia Lin; Armata, Raegan; Parr, James B

2014-01-01

To determine the effect of reference-based pricing (RBP) on the percentage of lab services utilized by members that were at or below the reference price. Retrospective, quasi-experimental, matched, case-control pilot evaluation of an RBP benefit for lab services. The study group included employees of a multinational grocery chain covered by a national health insurance carrier and subject to RBP for lab services; it had access to an online lab shopping tool and was informed about the RBP benefit through employer communications. The reference group was covered by the same insurance carrier but not subject to RBP. The primary end point was lab compliance, defined as the percentage of lab claims with total charges at or below the reference price. Difference-in-difference regression estimation evaluated changes in lab compliance between the 2 groups. Higher compliance per lab claim was evident for the study group compared with the reference group (69% vs 57%; Ponline shopping tool was used by 7% of the matched-adjusted study group prior to obtaining lab services. Lab compliance was 76% for study group members using the online tool compared with 68% among nonusers who were subject to RBP (P<.01). RBP can promote cost-conscious selection of lab services. Access to facilities that offer services below the reference price and education about RBP improve compliance. Evaluation of the effect of RBP on higher-cost medical services, including radiology, outpatient specialty, and elective inpatient procedures, is needed.

Recirculating Beam Breakup Study for the 12 GeV Upgrade at Jefferson Lab

International Nuclear Information System (INIS)

Shin, Ilkyoung; Satogata, Todd; Ahmed, Shahid; Bogacz, Slawomir; Stirbet, Mircea; Wang, Haipeng; Wang, Yan; Yunn, Byung; Bodenstein, Ryan

2012-01-01

Two new high gradient C100 cryomodules with a total of 16 new cavities were installed at the end of the CEBAF south linac during the 2011 summer shutdown as part of the 12-GeV upgrade project at Jefferson Lab. We surveyed the higher order modes (HOMs) of these cavities in the Jefferson Lab cryomodule test facility and CEBAF tunnel. We then studied recirculating beam breakup (BBU) in November 2011 to evaluate CEBAF low energy performance, measure transport optics, and evaluate BBU thresholds due to these HOMs. This paper discusses the experiment setup, cavity measurements, machine setup, optics measurements, and lower bounds on BBU thresholds by new cryomodules.

Recirculating Beam Breakup Study for the 12 GeV Upgrade at Jefferson Lab

Energy Technology Data Exchange (ETDEWEB)

Ilkyoung Shin, Todd Satogata, Shahid Ahmed, Slawomir Bogacz, Mircea Stirbet, Haipeng Wang, Yan Wang, Byung Yunn, Ryan Bodenstein

2012-07-01

Two new high gradient C100 cryomodules with a total of 16 new cavities were installed at the end of the CEBAF south linac during the 2011 summer shutdown as part of the 12-GeV upgrade project at Jefferson Lab. We surveyed the higher order modes (HOMs) of these cavities in the Jefferson Lab cryomodule test facility and CEBAF tunnel. We then studied recirculating beam breakup (BBU) in November 2011 to evaluate CEBAF low energy performance, measure transport optics, and evaluate BBU thresholds due to these HOMs. This paper discusses the experiment setup, cavity measurements, machine setup, optics measurements, and lower bounds on BBU thresholds by new cryomodules.

A Well-Maintained Lab Is a Safer Lab. Safety Spotlight

Science.gov (United States)

Walls, William H.; Strimel, Greg J.

2018-01-01

Administration and funding can cause Engineering/Technology Education (ETE) programs to thrive or die. To administrators, the production/prototyping equipment and laboratory setting are often viewed as the features that set ETE apart from other school subjects. A lab is a unique gift as well as a responsibility. If an administrator can see that…

MatLab Programming for Engineers Having No Formal Programming Knowledge

Science.gov (United States)

Shaykhian, Linda H.; Shaykhian, Gholam Ali

2007-01-01

MatLab is one of the most widely used very high level programming languages for Scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. Also, stated are the current limitations of the MatLab, which possibly can be taken care of by Mathworks Inc. in a future version to make MatLab more versatile.

eComLab: remote laboratory platform

Science.gov (United States)

Pontual, Murillo; Melkonyan, Arsen; Gampe, Andreas; Huang, Grant; Akopian, David

2011-06-01

Hands-on experiments with electronic devices have been recognized as an important element in the field of engineering to help students get familiar with theoretical concepts and practical tasks. The continuing increase the student number, costly laboratory equipment, and laboratory maintenance slow down the physical lab efficiency. As information technology continues to evolve, the Internet has become a common media in modern education. Internetbased remote laboratory can solve a lot of restrictions, providing hands-on training as they can be flexible in time and the same equipment can be shared between different students. This article describes an on-going remote hands-on experimental radio modulation, network and mobile applications lab project "eComLab". Its main component is a remote laboratory infrastructure and server management system featuring various online media familiar with modern students, such as chat rooms and video streaming.

Factors That Affect Suicidal Attempt Risk Among Korean Elderly Adults: A Path Analysis

Directory of Open Access Journals (Sweden)

Junsoo Ro

2015-01-01

Full Text Available Objectives: Among the Korean elderly (those 65 years of age and older, the suicide rate is 80.3/100 000 people, which is ten times higher than the Organization for Economic Cooperation and Development average. Because South Korea is rapidly becoming an aging population, this high elderly suicidal rate will only get worse. Although the size of the elderly suicide problem is quite large, previous research in South Korea has surveyed restricted areas and not the entire country. Even though the factors that affect elderly suicide are complicated, there has been little research into these influencing factors. Thus, this research uses the national survey data (Community Health Survey that was obtained in 2009. Additionally, we analyze factors affecting elderly suicidal ideation and attempts as well as the paths of these effects. Methods: Community Health Survey data obtained by the Korea Centers for Disease Control and Prevention in 2009 was used for this study. We additionally examined the factors that affect suicide with chi-squared tests, t-tests, Pearson’s correlation test, and path analysis. Results: Depressive symptoms and suicidal ideation are the only factors that directly affect suicidal attempts. Demographic, behavioral, and physical activity factors have indirect effects on suicidal attempts. Conclusions: Depression has the strongest influence on suicidal ideation and attempts. Demographic, behavioral, and physical activity factors affect suicidal attempts mostly through depressive symptoms. In addition, there is a path that suggests that demographic, behavioral, and physical activity factors affect suicidal attempts not through depression symptoms but only through suicidal ideation. This means that the elderly who do not have depression symptoms attempt suicide according to their own situations and characteristics.

Technology Roadmap: Lab-on-a-Chip

OpenAIRE

Pattharaporn Suntharasaj; Tugrul U Daim

2010-01-01

With the integration of microfluidic and MEMS technologies, biochips such as the lab-on-a-chip (LOC) devices are at the brink of revolutionizing the medical disease diagnostics industries. Remarkable advancements in the biochips industry are making products resembling Star Trek.s "tricorder" and handheld medical scanners a reality. Soon, doctors can screen for cancer at the molecular level without costly and cumbersome equipments, and discuss treatment plans based on immediate lab results. Th...

Laboratory Tests

Science.gov (United States)

... Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & ... What are lab tests? Laboratory tests are medical devices that are intended for use on samples of blood, urine, or other tissues ...

Total Lactic Acid Bacteria (LAB), Antioxidant Activity, and Acceptance of Synbiotic Yoghurt with Binahong Leaf Extract (Anredera cordifolia (Ten.) Steenis)

Science.gov (United States)

Lestari, R. P.; Nissa, C.; Afifah, D. N.; Anjani, G.; Rustanti, N.

2018-02-01

Alternative treatment for metabolic syndrome can be done by providing a diet consist of functional foods or beverages. Synbiotic yoghurt containing binahong leaf extract which high in antioxidant, total LAB and fiber can be selected to reduce the risk of metabolic syndrome. The effect of binahong leaf extract in synbiotic yoghurt against total LAB, antioxidant activity, and acceptance were analyzed. The experiment was done with complete randomized design with addition of binahong leaf extract 0% (control); 0.12%; 0.25%; 0.5% in synbiotic yoghurt. Analysis of total LAB using Total Plate Count test, antioxidant activity using DPPH, and acceptance were analyzed by hedonic test. The addition of binahong leaf extract in various doses in synbiotic yoghurt decreased total LAB without significant effect (p=0,145). There was no effect of addition binahong leaf extract on antioxidant activity (p=0,297). The addition of binahong leaf extract had an effect on color, but not on aroma, texture and taste. The best result was yoghurt synbiotic with addition of 0,12% binahong leaf extract. Conclusion of the research was the addition of binahong leaf extract to synbiotic yogurt did not significantly affect total LAB, antioxidant activity, aroma, texture and taste; but had a significant effect on color.

Fecal Occult Blood Test (FOBT): MedlinePlus Lab Test Information

Science.gov (United States)

... caused by a variety of conditions, including: Polyps Hemorrhoids Diverticulosis Ulcers Colitis , a type of inflammatory bowel ... on a fecal occult blood test include ulcers, hemorrhoids, polyps, and benign tumors. If your test results ...

Respiratory Syncytial Virus (RSV) Test: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/respiratorysyncytialvirusrsvtest.html Respiratory Syncytial Virus (RSV) Test To use the sharing ... is an RSV test? RSV , which stands for respiratory syncytial virus, is an infection that affects the ...

A study on the effect of varying sequence of lab performance skills on lab performance of high school physics students

Science.gov (United States)

Bournia-Petrou, Ethel A.

The main goal of this investigation was to study how student rank in class, student gender and skill sequence affect high school students' performance on the lab skills involved in a laboratory-based inquiry task in physics. The focus of the investigation was the effect of skill sequence as determined by the particular task. The skills considered were: Hypothesis, Procedure, Planning, Data, Graph, Calculations and Conclusion. Three physics lab tasks based on the simple pendulum concept were administered to 282 Regents physics high school students. The reliability of the designed tasks was high. Student performance was evaluated on individual student written responses and a scoring rubric. The tasks had high discrimination power and were of moderate difficulty (65%). It was found that, student performance was weak on Conclusion (42%), Hypothesis (48%), and Procedure (51%), where the numbers in parentheses represent the mean as a percentage of the maximum possible score. Student performance was strong on Calculations (91%), Data (82%), Graph (74%) and Plan (68%). Out of all seven skills, Procedure had the strongest correlation (.73) with the overall task performance. Correlation analysis revealed some strong relationships among the seven skills which were grouped in two distinct clusters: Hypothesis, Procedure and Plan belong to one, and Data, Graph, Calculations, and Conclusion belong to the other. This distinction may indicate different mental processes at play within each skill cluster. The effect of student rank was not statistically significant according to the MANOVA results due to the large variation of rank levels among the participating schools. The effect of gender was significant on the entire test because of performance differences on Calculations and Graph, where male students performed better than female students. Skill sequence had a significant effect on the skills of Procedure, Plan, Data and Conclusion. Students are rather weak in proposing a

LXI Technologies for Remote Labs: An Extension of the VISIR Project

OpenAIRE

Jaime Irurzun; Olga Dziabenko; Pablo Orduña; Diego Lopez-de-Ipiña; Ignacio Angulo; Javier García-Zubia; Unai Hernandez-Jayo

2010-01-01

Several remote labs to support analog circuits are presented in this work. They are analyzed from the software and the hardware point of view. VISIR remote lab is one of these labs. After this analysis, a new VISIR remote lab approach is presented. This extension of the VISIR project is based on LXI technologies with the aim of becoming it in a remote lab easily interchangeable with other instruments. The addition of new components and experiments is also easier and cheaper.

Automated Quality Control for Sensor Based Symptom Measurement Performed Outside the Lab

Directory of Open Access Journals (Sweden)

Reham Badawy

2018-04-01

Full Text Available The use of wearable sensing technology for objective, non-invasive and remote clinimetric testing of symptoms has considerable potential. However, the accuracy achievable with such technology is highly reliant on separating the useful from irrelevant sensor data. Monitoring patient symptoms using digital sensors outside of controlled, clinical lab settings creates a variety of practical challenges, such as recording unexpected user behaviors. These behaviors often violate the assumptions of clinimetric testing protocols, where these protocols are designed to probe for specific symptoms. Such violations are frequent outside the lab and affect the accuracy of the subsequent data analysis and scientific conclusions. To address these problems, we report on a unified algorithmic framework for automated sensor data quality control, which can identify those parts of the sensor data that are sufficiently reliable for further analysis. Combining both parametric and nonparametric signal processing and machine learning techniques, we demonstrate that across 100 subjects and 300 clinimetric tests from three different types of behavioral clinimetric protocols, the system shows an average segmentation accuracy of around 90%. By extracting reliable sensor data, it is possible to strip the data of confounding factors in the environment that may threaten reproducibility and replicability.

Measuring and Advancing Experimental Design Ability in an Introductory Course without Altering Existing Lab Curriculum

Directory of Open Access Journals (Sweden)

Ryan A. Shanks

2017-05-01

Full Text Available Introductory biology courses provide an important opportunity to prepare students for future courses, yet existing cookbook labs, although important in their own way, fail to provide many of the advantages of semester-long research experiences. Engaging, authentic research experiences aid biology students in meeting many learning goals. Therefore, overlaying a research experience onto the existing lab structure allows faculty to overcome barriers involving curricular change. Here we propose a working model for this overlay design in an introductory biology course and detail a means to conduct this lab with minimal increases in student and faculty workloads. Furthermore, we conducted exploratory factor analysis of the Experimental Design Ability Test (EDAT and uncovered two latent factors which provide valid means to assess this overlay model’s ability to increase advanced experimental design abilities. In a pre-test/post-test design, we demonstrate significant increases in both basic and advanced experimental design abilities in an experimental and comparison group. We measured significantly higher gains in advanced experimental design understanding in students in the experimental group. We believe this overlay model and EDAT factor analysis contribute a novel means to conduct and assess the effectiveness of authentic research experiences in an introductory course without major changes to the course curriculum and with minimal increases in faculty and student workloads.

Overview of RepLab 2012: Evaluating Online Reputation Management Systems

NARCIS (Netherlands)

Amigó, E.; Corujo, A.; Gonzalo, J.; Meij, E.; de Rijke, M.

2012-01-01

This paper summarizes the goals, organization and results of the first RepLab competitive evaluation campaign for Online Reputation Management Systems (RepLab 2012). RepLab focused on the reputation of companies, and asked participant systems to annotate different types of information on tweets

Using LabVIEW for the design and control of digital signal processing systems. Simulation of the ultra slow extraction at COSY

International Nuclear Information System (INIS)

Heinrichs, G.; Rongen, H.; Jamal, R.

1994-01-01

For the ultraslow extraction system of the COler SYnchrotron COSY a direct digital synthesis system is being developed. LabVIEW from National Instruments has been chosen as a tool for the simulation of the digital signal processing algorithms as well as the generation of test sequences. In order to generate adjustable band-limited noise centered at a carrier frequency, alternative algorithms have been studied. LabVIEW permits the interactive variation of relevant system parameters by means of a graphical language in order to study the quality of the frequency band limitation as a function of noise parameters, digital accuracy and frequency range and to generate test sequences by means of a real-time function generator. Advantages and limitations of LabVIEW for such applications are discussed. ((orig.))

LXI Technologies for Remote Labs: An Extension of the VISIR Project

Directory of Open Access Journals (Sweden)

Jaime Irurzun

2010-09-01

Full Text Available Several remote labs to support analog circuits are presented in this work. They are analyzed from the software and the hardware point of view. VISIR remote lab is one of these labs. After this analysis, a new VISIR remote lab approach is presented. This extension of the VISIR project is based on LXI technologies with the aim of becoming it in a remote lab easily interchangeable with other instruments. The addition of new components and experiments is also easier and cheaper.

Nuclear spectrometry data acquisition system based on LabVIEW

International Nuclear Information System (INIS)

Zhao Dan; Shen Li; Deng Lili; Zhou Sichun

2006-01-01

The whole process of designing nuclear spectrometry data acquisition system was particularized with LabVIEW and data acquisition board, based on virtual instrument technology. It can analyze the output of the radiation detector and give the height spectrum by the method of the continuous real-time data acquisition and the abstraction of pulse signal amplitude. The simple test shows that this system can meet the demand, and it can be easily expanded according to the situation. (authors)

The experiment editor: supporting inquiry-based learning with virtual labs

Science.gov (United States)

Galan, D.; Heradio, R.; de la Torre, L.; Dormido, S.; Esquembre, F.

2017-05-01

Inquiry-based learning is a pedagogical approach where students are motivated to pose their own questions when facing problems or scenarios. In physics learning, students are turned into scientists who carry out experiments, collect and analyze data, formulate and evaluate hypotheses, and so on. Lab experimentation is essential for inquiry-based learning, yet there is a drawback with traditional hands-on labs in the high costs associated with equipment, space, and maintenance staff. Virtual laboratories are helpful to reduce these costs. This paper enriches the virtual lab ecosystem by providing an integrated environment to automate experimentation tasks. In particular, our environment supports: (i) scripting and running experiments on virtual labs, and (ii) collecting and analyzing data from the experiments. The current implementation of our environment supports virtual labs created with the authoring tool Easy Java/Javascript Simulations. Since there are public repositories with hundreds of freely available labs created with this tool, the potential applicability to our environment is considerable.

Development of an Android Application in the Form of a Simulation Lab as Learning Media for Senior High School Students

Science.gov (United States)

Astra, I Made; Nasbey, Hadi; Nugraha, Aditiya

2015-01-01

The aim of this research is to create learning media for senior high school students through an android application in the form of a simulation lab. The method employed in the study is research and development. A simulation lab which has been made subsequently validated by concept and media experts, further empirical testing by teachers and…

Pediatric Emergency Department Suicidal Patients: Two-Site Evaluation of Suicide Ideators, Single Attempters, and Repeat Attempters

Science.gov (United States)

Asarnow, Joan Rosenbaum; Baraff, Larry J.; Berk, Michele; Grob, Charles; Devich-Navarro, Mona; Suddath, Robert; Piacentini, John; Tang, Lingqi

2008-01-01

The study examines ideators, single attempters, and repeats attempters of suicide to clarify optimal strategies for emergency department management and risk assessment to help them in reducing youth suicide and suicide attempts. Depression was found to be a strong predictor of suicide/suicide attempts along with substance use, externalizing…

Creating context for the experiment record. User-defined metadata: investigations into metadata usage in the LabTrove ELN.

Science.gov (United States)

Willoughby, Cerys; Bird, Colin L; Coles, Simon J; Frey, Jeremy G

2014-12-22

The drive toward more transparency in research, the growing willingness to make data openly available, and the reuse of data to maximize the return on research investment all increase the importance of being able to find information and make links to the underlying data. The use of metadata in Electronic Laboratory Notebooks (ELNs) to curate experiment data is an essential ingredient for facilitating discovery. The University of Southampton has developed a Web browser-based ELN that enables users to add their own metadata to notebook entries. A survey of these notebooks was completed to assess user behavior and patterns of metadata usage within ELNs, while user perceptions and expectations were gathered through interviews and user-testing activities within the community. The findings indicate that while some groups are comfortable with metadata and are able to design a metadata structure that works effectively, many users are making little attempts to use it, thereby endangering their ability to recover data in the future. A survey of patterns of metadata use in these notebooks, together with feedback from the user community, indicated that while a few groups are comfortable with metadata and are able to design a metadata structure that works effectively, many users adopt a "minimum required" approach to metadata. To investigate whether the patterns of metadata use in LabTrove were unusual, a series of surveys were undertaken to investigate metadata usage in a variety of platforms supporting user-defined metadata. These surveys also provided the opportunity to investigate whether interface designs in these other environments might inform strategies for encouraging metadata creation and more effective use of metadata in LabTrove.

A Case Study of a High School Fab Lab

Science.gov (United States)

Lacy, Jennifer E.

This dissertation examines making and design-based STEM education in a formal makerspace. It focuses on how the design and implementation of a Fab Lab learning environment and curriculum affect how instructors and students see themselves engaging in science, and how the Fab Lab relates to the social sorting practices that already take place at North High School. While there is research examining design-based STEM education in informal and formal learning environments, we know little about how K-12 teachers define STEM in making activities when no university or museum partnership exists. This study sought to help fill this gap in the research literature. This case study of a formal makerspace followed instructors and students in one introductory Fab Lab course for one semester. Additional observations of an introductory woodworking course helped build the case and set it into the school context, and provided supplementary material to better understand the similarities and differences between the Fab Lab course and a more traditional design-based learning course. Using evidence from observational field notes, participant interviews, course materials, and student work, I found that the North Fab Lab relies on artifacts and rhetoric symbolic of science and STEM to set itself apart from other design-based courses at North High School. Secondly, the North Fab Lab instructors and students were unable to explain how what they were doing in the Fab Lab was science, and instead relied on vague and unsupported claims related to interdisciplinary STEM practices and dated descriptions of science. Lastly, the design and implementation of the Fab Lab learning environment and curriculum and its separation from North High School's low tech, design-based courses effectively reinforced social sorting practices and cultural assumptions about student work and intelligence.

Glucose in Urine Test: MedlinePlus Lab Test Information

Science.gov (United States)

... glucose test to help make a diagnosis. References American Diabetes Association [Internet]. Arlington (VA): American Diabetes Association; c1995–2017. Checking Your Blood Glucose [cited 2017 ...

Application of LabVIEW on Ionization Chamber to Measurement Radiation

International Nuclear Information System (INIS)

Kerdchockchai, P.; Soodprasert, T.; Hoonnivathana, E.; Naemchnthara, P.; Limsuwan, P.; Naemchanthara, K.

2014-01-01

The purpose of this research was to apply LabVIEW program to control an ionization chamber. LabVIEW was used to compose a block diagram and front panel. The block diagram was programmed to be controlled by the front panel. Radiation dose of Cs -137 at 1.00, 1.50, 2.00, 2.50, 3.00 and 4.00 meter were compared from LabViEW and manual system. The results show that the different percentages of Pb filter of thickness 0, 20 and 39 mm are 0.68, 0.68 and 0.48, respectively. This experiment results indicated that the LabVIEW can be used in assisting radiation measurement. Furthermore, by controlling the ionization chamber by LabVIEW, the radiation dose received by operator is reduced.

A Low-Cost Remote Lab for Internet Services Distance Education

Directory of Open Access Journals (Sweden)

James Sissom

2006-08-01

Full Text Available Academic departments seeking to reach students via distance education course offerings find that some on-line curricula require a traditional hands-on lab model for student evaluation and assessment. The authors solve the problem of providing distance education curriculum and supporting instruction lab components by using a low-cost remote lab. The remote lab is used to evaluate student performance in managing web services and website development, solving security problems, patch management, scripting and web server management. In addition, the authors discuss assessment and evaluation techniques that will be used to determine instructional quality and student performance. Discussed are the remote lab architecture, use of disk images and utilization of Windows 2003 Internet Information Service, and Linux Red Hat 9.0 platforms.

Crystals in Urine Test: MedlinePlus Lab Test Information

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Urinalysis; 509 p. Johns Hopkins Medicine [ ...

The History of Science and Technology at Bell Labs

Science.gov (United States)

Bishop, David

2008-03-01

Over the last 80 years, Bell Labs has been one of the most scientifically and technologically productive research labs in the world. Inventions such as the transistor, laser, cell phone, solar cell, negative feedback amplifier, communications satellite and many others were made there. Scientific breakthroughs such as discovery of the Big Bang, the wave nature of the electron, electron localization and the fractional quantum hall effect were also made there making Bell Labs almost unique in terms of large impacts in both science and technology. In my talk, I will discuss the history of the lab, talk about the present and give some suggestions for how I see it evolving into the future.

Time Trials--An AP Physics Challenge Lab

Science.gov (United States)

Jones, David

2009-01-01

I have come to the conclusion that for high school physics classroom and laboratory experiences, simpler is better! In this paper I describe a very simple and effective lab experience that my AP students have thoroughly enjoyed year after year. I call this lab exercise "Time Trials." The experiment is simple in design and it is a lot of fun for…

An investigation of the effects of relevant samples and a comparison of verification versus discovery based lab design

Science.gov (United States)

Rieben, James C., Jr.

This study focuses on the effects of relevance and lab design on student learning within the chemistry laboratory environment. A general chemistry conductivity of solutions experiment and an upper level organic chemistry cellulose regeneration experiment were employed. In the conductivity experiment, the two main variables studied were the effect of relevant (or "real world") samples on student learning and a verification-based lab design versus a discovery-based lab design. With the cellulose regeneration experiment, the effect of a discovery-based lab design vs. a verification-based lab design was the sole focus. Evaluation surveys consisting of six questions were used at three different times to assess student knowledge of experimental concepts. In the general chemistry laboratory portion of this study, four experimental variants were employed to investigate the effect of relevance and lab design on student learning. These variants consisted of a traditional (or verification) lab design, a traditional lab design using "real world" samples, a new lab design employing real world samples/situations using unknown samples, and the new lab design using real world samples/situations that were known to the student. Data used in this analysis were collected during the Fall 08, Winter 09, and Fall 09 terms. For the second part of this study a cellulose regeneration experiment was employed to investigate the effects of lab design. A demonstration creating regenerated cellulose "rayon" was modified and converted to an efficient and low-waste experiment. In the first variant students tested their products and verified a list of physical properties. In the second variant, students filled in a blank physical property chart with their own experimental results for the physical properties. Results from the conductivity experiment show significant student learning of the effects of concentration on conductivity and how to use conductivity to differentiate solution types with the

Electronic lab notebooks: can they replace paper?

Science.gov (United States)

Kanza, Samantha; Willoughby, Cerys; Gibbins, Nicholas; Whitby, Richard; Frey, Jeremy Graham; Erjavec, Jana; Zupančič, Klemen; Hren, Matjaž; Kovač, Katarina

2017-05-24

Despite the increasingly digital nature of society there are some areas of research that remain firmly rooted in the past; in this case the laboratory notebook, the last remaining paper component of an experiment. Countless electronic laboratory notebooks (ELNs) have been created in an attempt to digitise record keeping processes in the lab, but none of them have become a 'key player' in the ELN market, due to the many adoption barriers that have been identified in previous research and further explored in the user studies presented here. The main issues identified are the cost of the current available ELNs, their ease of use (or lack of it) and their accessibility issues across different devices and operating systems. Evidence suggests that whilst scientists willingly make use of generic notebooking software, spreadsheets and other general office and scientific tools to aid their work, current ELNs are lacking in the required functionality to meet the needs of the researchers. In this paper we present our extensive research and user study results to propose an ELN built upon a pre-existing cloud notebook platform that makes use of accessible popular scientific software and semantic web technologies to help overcome the identified barriers to adoption.

European labs brace for German cuts: international collaboration

CERN Multimedia

Clery, D

1996-01-01

Germany, the largest contributor to international European research labs, announced plans to reduce its contributions an average of 8% in the nation's latest budget. CERN and other labs are worried that the cuts will endanger ongoing projects and that other countries may follow Germany's lead.

Can Graduate Teaching Assistants Teach Inquiry-Based Geology Labs Effectively?

Science.gov (United States)

Ryker, Katherine; McConnell, David

2014-01-01

This study examines the implementation of teaching strategies by graduate teaching assistants (GTAs) in inquiry-based introductory geology labs at a large research university. We assess the degree of inquiry present in each Physical Geology lab and compare and contrast the instructional practices of new and experienced GTAs teaching these labs. We…

Constructing the Components of a Lab Report Using Peer Review

Science.gov (United States)

Berry, David E.; Fawkes, Kelli L.

2010-01-01

A protocol that emphasizes lab report writing using a piecemeal approach coupled with peer review is described. As the lab course progresses, the focus of the report writing changes sequentially through the abstract and introduction, the discussion, and the procedure. Two styles of lab programs are presented. One style rotates the students through…

Increasing Students’ Interest by Encouraging them to Create Original Lab Projects

Directory of Open Access Journals (Sweden)

Petre Lucian Ogrutan

2017-11-01

Full Text Available Sometimes traditional lab projects based on standard kits and modules fail to stimulate students’ interest and creativity. This paper presents a novel laboratory concept which allows students to develop their own lab projects using open-source resources. The lab experiment includes competition aspects allowing every student to come up with ideas of which the best are selected. The lab projects include both hard and software components using Arduino-compatible systems and interfaces. Before starting the practical activities as well as after the completion of the lab session, the students were asked to fill in an anonymous questionnaire.

Open web system of Virtual labs for nuclear and applied physics

International Nuclear Information System (INIS)

Saldikov, I S; Afanasyev, V V; Petrov, V I; Ternovykh, M Yu

2017-01-01

An example of virtual lab work on unique experimental equipment is presented. The virtual lab work is software based on a model of real equipment. Virtual labs can be used for educational process in nuclear safety and analysis field. As an example it includes the virtual lab called “Experimental determination of the material parameter depending on the pitch of a uranium-water lattice”. This paper included general description of this lab. A description of a database on the support of laboratory work on unique experimental equipment which is included this work, its concept development are also presented. (paper)

Improving production of Zebra Fish Embryos in the lab

DEFF Research Database (Denmark)

Thomsen, Jens Peter; Adu, Robert Ohene

2011-01-01

in the laboratory. Culture conditions were maintained in the aquaria as stipulated in the OECD draft proposal for a new guideline on fish embryo tests. Furthermore, a sequence of steps were adopted and followed to improve upon previous work done in the lab in 2006. About 200 eggs were produced in one spawn trap......The utilization of fish embryos in toxicity testing of hazardous chemicals has recently been adopted in order to satisfy stricter rules and regulations related to using adult animals in toxicity testing. This paper presents optimising steps towards improving zebra fish embryo production...... within an hour of onset of light, an improvement over the 50-60 eggs produced in the previous work. This result demonstrates that with the right culture conditions and proper optimisation of procedure the required number of embryos needed for toxicity testing can be obtained....

A Hardware Lab Anywhere At Any Time

Directory of Open Access Journals (Sweden)

Tobias Schubert

2004-12-01

Full Text Available Scientific technical courses are an important component in any student's education. These courses are usually characterised by the fact that the students execute experiments in special laboratories. This leads to extremely high costs and a reduction in the maximum number of possible participants. From this traditional point of view, it doesn't seem possible to realise the concepts of a Virtual University in the context of sophisticated technical courses since the students must be "on the spot". In this paper we introduce the so-called Mobile Hardware Lab which makes student participation possible at any time and from any place. This lab nevertheless transfers a feeling of being present in a laboratory. This is accomplished with a special Learning Management System in combination with hardware components which correspond to a fully equipped laboratory workstation that are lent out to the students for the duration of the lab. The experiments are performed and solved at home, then handed in electronically. Judging and marking are also both performed electronically. Since 2003 the Mobile Hardware Lab is now offered in a completely web based form.

Lessons Learned from the Jefferson Lab - SNS Cryomodule Production Run

International Nuclear Information System (INIS)

John Hogan; Edward Daly; John Fischer; Joseph Preble

2005-01-01

In light of the recent developments with the International Linear Collider (ILC), and the recommendation to utilize ''Cold'' technology for this future particle accelerator, this paper will present the lessons learned from the recently concluded Spallation Neutron Source (SNS) superconducting radio frequency (SRF) cryomodule production run at the Thomas Jefferson National Accelerator Facility (Jefferson Lab). Over the past twenty years Jefferson Lab has worked with industry to successfully design, manufacture, test and commission more SRF cryomodules than any other entity in the United States. The knowledge gained from the design and fabrication of the SNS prototype, eleven - 0.61 (medium) beta and the twelve - 0.81 (high) beta cryomodules, will prove to be an effective asset to the ILC project. After delivery of the final production cryomodule in March 2005, design and fabrication data will be collected, evaluated and presented to make this information beneficial for future particle accelerator projects. Recommendations with respect to these findings will also be presented as an integral part of this paper

Precision Electron Beam Polarimetry in Hall C at Jefferson Lab

Science.gov (United States)

Gaskell, David

2013-10-01

The electron beam polarization in experimental Hall C at Jefferson Lab is measured using two devices. The Hall-C/Basel Møller polarimeter measures the beam polarization via electron-electron scattering and utilizes a novel target system in which a pure iron foil is driven to magnetic saturation (out of plane) using a superconducting solenoid. A Compton polarimeter measures the polarization via electron-photon scattering, where the photons are provided by a high-power, CW laser coupled to a low gain Fabry-Perot cavity. In this case, both the Compton-scattered electrons and backscattered photons provide measurements of the beam polarization. Results from both polarimeters, acquired during the Q-Weak experiment in Hall C, will be presented. In particular, the results of a test in which the Møller and Compton polarimeters made interleaving measurements at identical beam currents will be shown. In addition, plans for operation of both devices after completion of the Jefferson Lab 12 GeV Upgrade will also be discussed.

Suicide attempts in multiple sclerosis

DEFF Research Database (Denmark)

Stenager, Elsebeth Nylev; Jensen, Børge; Stenager, Maria

2011-01-01

The purposes of the study were (1) to estimate the risk of suicide attempts in multiple sclerosis (MS) patients in Denmark and compare the risk to the background population in the County of Funen, Denmark; (2) to estimate the risk of suicide attempts in MS patients receiving immunomodulating...... therapy compared with untreated patients. The Danish MS Registry, the Danish MS Treatment Registry and the Suicide Attempt Registry are linked and merged together using a person identification number given to all persons residing in Denmark. Among 404 MS patients, 15 patients had attempted suicide...

Universal lab-on-a-chip platform for complex, perfused 3D cell cultures

Science.gov (United States)

Sonntag, F.; Schmieder, F.; Ströbel, J.; Grünzner, S.; Busek, M.; Günther, K.; Steege, T.; Polk, C.; Klotzbach, U.

2016-03-01

The miniaturization, rapid prototyping and automation of lab-on-a-chip technology play nowadays a very important role. Lab-on-a-chip technology is successfully implemented not only for environmental analysis and medical diagnostics, but also as replacement of animals used for the testing of substances in the pharmaceutical and cosmetics industries. For that purpose the Fraunhofer IWS and partners developed a lab-on-a-chip platform for perfused cell-based assays in the last years, which includes different micropumps, valves, channels, reservoirs and customized cell culture modules. This technology is already implemented for the characterization of different human cell cultures and organoids, like skin, liver, endothelium, hair follicle and nephron. The advanced universal lab-on-a-chip platform for complex, perfused 3D cell cultures is divided into a multilayer basic chip with integrated micropump and application-specific 3D printed cell culture modules. Moreover a technology for surface modification of the printed cell culture modules by laser micro structuring and a complex and flexibly programmable controlling device based on an embedded Linux system was developed. A universal lab-on-a-chip platform with an optional oxygenator and a cell culture module for cubic scaffolds as well as first cell culture experiments within the cell culture device will be presented. The module is designed for direct interaction with robotic dispenser systems. This offers the opportunity to combine direct organ printing of cells and scaffolds with the microfluidic cell culture module. The characterization of the developed system was done by means of Micro-Particle Image Velocimetry (μPIV) and an optical oxygen measuring system.

RBC urine test

Science.gov (United States)

... measurement for a result of this test. Normal value ranges may vary slightly among different laboratories. Some labs use different measurements or test different samples. Talk to your provider ...

Physics lab in spin

CERN Multimedia

Hawkes, N

1999-01-01

RAL is fostering commerical exploitation of its research and facilities in two main ways : spin-out companies exploit work done at the lab, spin-in companies work on site taking advantage of the facilities and the expertise available (1/2 page).

Practical Clinical Training in Skills Labs: Theory and Practice

Directory of Open Access Journals (Sweden)

Bugaj, T. J.

2016-08-01

Full Text Available Today, skills laboratories or “skills labs”, i.e. specific practical skill training facilities, are a firmly established part of medical education offering the possibility of training clinical procedures in a safe and fault-forging environment prior to real life application at bedside or in the operating room. Skills lab training follows a structured teaching concept, takes place under supervision and in consideration of methodological-didactic concepts, ideally creating an atmosphere that allows the repeated, anxiety- and risk-free practice of targeted skills.In this selective literature review, the first section is devoted to (I the development and dissemination of the skills lab concept. There follows (II an outline of the underlying idea and (III an analysis of key efficacy factors. Thereafter, (IV the training method’s effectiveness and transference are illuminated, before (V the use of student tutors, in the sense of peer-assisted-learning, in skills labs is discussed separately. Finally, (VI the efficiency of the skills lab concept is analyzed, followed by an outlook on future developments and trends in the field of skills lab training.

LabVIEW-based X-ray detection system for laser compton scattering experiment

International Nuclear Information System (INIS)

Luo Wen; Xu Wang; Pan Qiangyan

2010-01-01

A LabVIEW-based X-ray detection system has been developed for laser-Compton scattering (LCS) experiment at the 100 MeV Linac of the Shanghai Institute of Applied Physics (SINAP). It mainly consists of a Si (Li) detector, readout electronics and a LabVIEW-based Data Acquisition (DAQ), and possesses the functions of signal spectrum displaying, acquisition control and simple online data analysis and so on. The performance test shows that energy and time resolutions of the system are 184 eV at 5.9 keV and ≤ 1% respectively and system instability is found to be 0.3‰ within a week. As a result, this X-ray detection system has low-cost and high-performance features and can meet the requirements of LCS experiment. (authors)

EarthLabs - Investigating Hurricanes: Earth's Meteorological Monsters

Science.gov (United States)

McDaris, J. R.; Dahlman, L.; Barstow, D.

2007-12-01

Earth science is one of the most important tools that the global community needs to address the pressing environmental, social, and economic issues of our time. While, at times considered a second-rate science at the high school level, it is currently undergoing a major revolution in the depth of content and pedagogical vitality. As part of this revolution, labs in Earth science courses need to shift their focus from cookbook-like activities with known outcomes to open-ended investigations that challenge students to think, explore and apply their learning. We need to establish a new model for Earth science as a rigorous lab science in policy, perception, and reality. As a concerted response to this need, five states, a coalition of scientists and educators, and an experienced curriculum team are creating a national model for a lab-based high school Earth science course named EarthLabs. This lab course will comply with the National Science Education Standards as well as the states' curriculum frameworks. The content will focus on Earth system science and environmental literacy. The lab experiences will feature a combination of field work, classroom experiments, and computer access to data and visualizations, and demonstrate the rigor and depth of a true lab course. The effort is being funded by NOAA's Environmental Literacy program. One of the prototype units of the course is Investigating Hurricanes. Hurricanes are phenomena which have tremendous impact on humanity and the resources we use. They are also the result of complex interacting Earth systems, making them perfect objects for rigorous investigation of many concepts commonly covered in Earth science courses, such as meteorology, climate, and global wind circulation. Students are able to use the same data sets, analysis tools, and research techniques that scientists employ in their research, yielding truly authentic learning opportunities. This month-long integrated unit uses hurricanes as the story line by

Aircraft Lighting and Transparency Lab

Data.gov (United States)

Federal Laboratory Consortium — The Advanced Lighting and Transparencies with Night Combat Lab performs radiometric and photometric measurements of cockpit lighting and displays. Evaluates the day,...

Creative Science Teaching Labs: New Dimensions in CPD

Science.gov (United States)

Chappell, Kerry; Craft, Anna

2009-01-01

This paper offers analysis and evaluation of "Creative Science Teaching (CST) Labs III", a unique and immersive approach to science teachers' continuing professional development (CPD) designed and run by a London-based organisation, Performing Arts Labs (PAL), involving specialists from the arts, science and technology as integral. Articulating…

Living Labs als een Vehikel voor (Onderwijs)innovatie

NARCIS (Netherlands)

Ellen Sjoer

2014-01-01

Wereldwijd schieten ze als paddenstoelen uit de grond: living labs. Deze ‘levende laboratoria’ zijn er in alle soorten en maten. Meestal wordt het lab gezien als een onderzoeks- en ontwikkelomgeving om een probleem met verschillende partijen op een innovatieve manier op te lossen. De thema’s van de

Fifteen years experience: Egyptian metabolic lab | Fateen | Egyptian ...

African Journals Online (AJOL)

Those patients were classified as: 722 patients (69.4%) with lysosomal storage disorders, 302 patients (29%) with amino acid disorders and 17 patients (1.6%) with galactosemia. Conclusion: This study illustrates the experience of the reference metabolic lab in Egypt over 15 years. The lab began metabolic disorder ...

Register for Suicide Attempts

DEFF Research Database (Denmark)

Christiansen, Erik; Jensen, Børge Frank

2004-01-01

The Register for Suicide Attempts (RSA) is a product of the WHO research project "WHO/Euro Multicentre Study on Parasuicide", which, among other things, had the purpose of collecting data on suicide attempts from 13 European countries. Data is collected in order to calculate trends and identify...

Development of Guided Inquiry-Based Student Lab Worksheet on the Making of Pineapple Flavoring

Science.gov (United States)

Dwiyanti, G.; Suryatna, A.; Taibah, I.

2017-02-01

The aim of this research was to develop guided inquiry based student lab worksheet on making pineapple flavour and knowing the quality of worksheet that is being developed. Research methods that is being conducted is research and development that is limited by a preliminary studies (literature studies, field surveys, and preparation of the initial product) and development of the model (within limited testing). The results from analyze the books sources and fields survey showed that the characteristic of esterification lab worksheet that currently available still in the direct instruction form (cookbook). The optimization result of making pineapple flavour experiment that was conducted are the ethanol volume 3 mL, butyric acid volume 2 mL, sulfuric acid 5 drops, saturated NaHCO3 solution volume 9 mL, and temperature of heating was 80 °C. The characteristic of guided inquiry based student lab worksheet that was developed contained phenomenon and instructions that suitable with inquiry stages to guide the students in doing the experiment of making pineapple flavour. The evaluation of designated teachers and lecturers of the developed student worksheet were very good (96,08%). Lab-experiment feasibility achieved by using guided inquiry based student lab worksheets that is being developed based on the inquiry stages that conducted by student were found very good (97,50%) and accomplishment based on students’ answer of the tasks in the worksheet were found very good (83,84%). Students’ responses of the experiments using the developed worksheet are found very good (81,84%).

Measles and Mumps Tests: MedlinePlus Lab Test Information

Science.gov (United States)

... used to: Find out whether you have an active infection of measles or mumps. An active infection means you have symptoms of the illness. ... will be collected into a test tube or vial. You may feel a little sting when the ...

Overall image of nuclear tests and their human effects at semipalatinsk. An attempt at analyses based on verbal data

International Nuclear Information System (INIS)

Matsuo, Masatsugu; Kawano, Noriyuki; Satoh, Kenichi; Apsalikov, Kazbek N.; Moldagaliev, Targat

2006-01-01

The present paper is part of an attempt at finally reconstructing the realities of nuclear tests and their human effects near Semipalatinsk, Kazakhstan. As a first step, it tries to reconstruct the overall image of nuclear tests and their human effects. Our data are 199 written testimonies of those affected by radiation, which were collected in 2002 and 2003. We statistically processed them, and categorized those words and expressions, which occurred most frequently in the testimonies, and obtained some forty categories, which represent the experiences, feelings, desires of those affected by radiation. Next, we conducted a principal component analysis of the categories. The result shows: (1) The experiences of the nuclear tests are arranged along the time axis, with direct experiences of the nuclear tests forming one coherent part of the perception and memory, and with other subsequent experiences forming another. (2) Of the latter, we can discern a core of the experiences on human effects such as 'disease,' 'death,' family,' 'radiation,' and so on. (3) And around this core, we see two different trends: one pointing to the current distress and plight, and the other pointing to future fear and hope. (author)

[Suicide attempts among Chilean adolescents].

Science.gov (United States)

Valdivia, Mario; Silva, Daniel; Sanhueza, Félix; Cova, Félix; Melipillán, Roberto

2015-03-01

Suicide mortality rates are increasing among teenagers. To study the prevalence and predictive factors of suicide attempts among Chilean adolescents. A random sample of 195 teenagers aged 16 ± 1 years (53% males) answered an anonymous survey about their demographic features, substance abuse, the Osaka suicidal ideation questionnaire, Smilksten familial Apgar. Beck hopelessness scale, Beck depression scale and Coppersmith self-esteem inventory. Twenty five percent of respondents had attempted suicide at least in one occasion during their lives. These attempts were significantly associated with female gender, absent parents, family dysfunction, drug abuse, smoking, low self-esteem, hopelessness, depression and recent suicidal ideation. A logistic regression analysis accepted female gender, smoking and recent suicidal ideation as significant independent predictors of suicide attempt. Suicide attempted is common among teenagers and its predictors are female sex, smoking and previous suicidal ideation.

Kidney function tests

Science.gov (United States)

Kidney function tests are common lab tests used to evaluate how well the kidneys are working. Such tests include: ... Oh MS, Briefel G. Evaluation of renal function, water, electrolytes ... and Management by Laboratory Methods . 23rd ed. Philadelphia, ...

ERLN Technical Support for Labs

Science.gov (United States)

The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

Respecifying lab ethnography an ethnomethodological study of experimental physics

CERN Document Server

Sormani, Philippe

2014-01-01

Respecifying Lab Ethnography delivers the first ethnomethodological study of current experimental physics in action, describing the disciplinary orientation of lab work and exploring the discipline in its social order, formal stringency and skilful performance - in situ and in vivo. In bringing together two major strands of ethnomethodological inquiry, reflexive ethnography and video analysis, which have hitherto existed in parallel, Respecifying Lab Ethnography introduces a practice-based video analysis. In doing so, the book recasts conventional distinctions to shed fresh light on methodolog

Lab-On-a-Chip Application Development (LOCAD): Bridging Technology Readiness for Exploration

Science.gov (United States)

Spearing, Scott F.; Jenkins, Andy

2004-01-01

At Marshall Space Flight Center we have established a capability to investigate the use of microfluidics for space flight. The Lab-On-a-Chip Application Development (LOCAD) team has created a program for advancing Technology Readiness Levels (TRL) of 1 and 2 to TRL 6 and 7, quickly and economically for Lab-On-a-Chip (LOC) applications. Scientists and engineers can utilize LOCAD'S process to efficiently learn about microfluidics and determine if microfluidics is applicable to their needs. Once the applicability has been determined, LOCAD can then perform tests to develop the new fluidic protocols which are different from macro-scale chemical reaction protocols. With this information new micro-fluidic devices can be created and tested. Currently, LOCAD is focused on using microfluidics for both Environmental Monitoring & Control, and Medical Systems. Eventually, handheld portable units utilizing LOC technology will perform rapid tests to determine water quality, and microbial contamination levels. Since LOC technology is drastically reduced in physical size, it thereby reduces power, weight, volume, and sample requirements, a big advantage considering the resource constraints associated with spaceflight. Another one of LOCAD's current activities is the development of a microfluidic system to aid in the search for life on Mars.

A mobile design lab for user-driven innovation

DEFF Research Database (Denmark)

Christiansen, Ellen; Kanstrup, Anne Marie

2007-01-01

The paper presents the history and conceptual foundation for the Mobile Design Lab, ment to support both designers and users in the acts of user-driven innovation. The Mobile Design Lab is based on Vygotsky's theory of tool- and language-mediation, and was created in 2004 to support research...... and teaching of user driven innovation. Being itself an example of user-driven innovation it has taken shape of HCI design research projekcts, in which we have been involved since 2004. The first challenge was to get 'out of the lab', the next to get 'out of the head', and finally we are currently working...

STUDY OF SUICIDE ATTEMPTS IN SCHIZOPHRENIA

Directory of Open Access Journals (Sweden)

Jagadeesan Madras Sundararajan

2016-07-01

Full Text Available BACKGROUND Schizophrenia is a major mental illness whose sufferers have been found to have lesser longevity than general population. The most common cause for premature death in schizophrenia is suicide. There are very few Indian studies on suicide in persons suffering from schizophrenia. OBJECTIVES The objectives were to study the frequency of suicide attempt in schizophrenia to compare and study the clinical and sociodemographic profile of suicide attempters and non-attempters in schizophrenia and to analyse and study the various risk factors of suicide attempts in persons suffering from schizophrenia. METHODS A sample of 100 consecutive patients attending review OPD of a government tertiary care hospital in Chennai were selected. Those who had a diagnosis of schizophrenia were screened for past suicide attempts. They were divided into two groups as suicide attempters and non-attempters and analysed using the SAPS (Scale for Assessment of Positive Symptoms, SANS (Scale for Assessment of Negative Symptoms, Calgary depression scale, and Beck’s suicide intent scale. RESULTS People suffering from schizophrenia are at a high risk for making suicidal attempts (27% especially when the illness is acute and severe in early stages when accompanied by depressive symptoms. Demographic profile such as age, sex, education, occupation, socio-economic status, marital status, and family type were not significantly related to suicide attempts. Family history of suicide was a significant factor in patients with suicide attempts. Majority of the attempts were of medium-to-high intent, hanging being the commonest method, and were attributed to most commonly delusions and depressive symptoms.

How do clinicians and suicide attempters understand suicide attempt impulsivity? A qualitative study.

Science.gov (United States)

Rimkeviciene, Jurgita; O'Gorman, John; De Leo, Diego

2016-01-01

Inconsistencies in the definition of impulsive suicide attempts hamper research integration. To expand the currently limited data on how this construct is used in clinical practice, researchers interviewed eight suicide attempters to create timelines of their suicide process, then had seven experienced clinicians review these timelines. Thematic analysis of the patient and clinician data revealed three themes: "thinking out," build-up, and unclear intentionality. The results imply that assessing build-up of agitation and exhaustion symptoms can contribute to understanding acuteness of suicide risk. In addition, uncertainty about one's intentions during the attempt should not be equated to low intent to die.

Introduction to Computing: Lab Manual. Faculty Guide [and] Student Guide.

Science.gov (United States)

Frasca, Joseph W.

This lab manual is designed to accompany a college course introducing students to computing. The exercises are designed to be completed by the average student in a supervised 2-hour block of time at a computer lab over 15 weeks. The intent of each lab session is to introduce a topic and have the student feel comfortable with the use of the machine…

Digital Social Science Lab

DEFF Research Database (Denmark)

Svendsen, Michael; Lauersen, Christian Ulrich

2015-01-01

At the Faculty Library of Social Sciences (part of Copenhagen University Library) we are currently working intensely towards the establishment of a Digital Social Science Lab (DSSL). The purpose of the lab is to connect research, education and learning processes with the use of digital tools...... at the Faculty of Social Sciences. DSSL will host and facilitate an 80 m2 large mobile and intelligent study- and learning environment with a focus on academic events, teaching and collaboration. Besides the physical settings DSSL has two primary functions: 1. To implement relevant social scientific software...... and hardware at the disposal for students and staff at The Faculty of Social Sciences along with instruction and teaching in the different types of software, e.g. Stata, Nvivo, Atlas.ti, R Studio, Zotero and GIS-software. 2. To facilitate academic events focusing on use of digital tools and analytic software...

Virtual Simulations as Preparation for Lab Exercises: Assessing Learning of Key Laboratory Skills in Microbiology and Improvement of Essential Non-Cognitive Skills.

Directory of Open Access Journals (Sweden)

Guido Makransky

Full Text Available To investigate if a virtual laboratory simulation (vLAB could be used to replace a face to face tutorial (demonstration to prepare students for a laboratory exercise in microbiology.A total of 189 students who were participating in an undergraduate biology course were randomly selected into a vLAB or demonstration condition. In the vLAB condition students could use a vLAB at home to 'practice' streaking out bacteria on agar plates in a virtual environment. In the demonstration condition students were given a live demonstration from a lab tutor showing them how to streak out bacteria on agar plates. All students were blindly assessed on their ability to perform the streaking technique in the physical lab, and were administered a pre and post-test to determine their knowledge of microbiology, intrinsic motivation to study microbiology, and self-efficacy in the field of microbiology prior to, and after the experiment.The results showed that there were no significant differences between the two groups on their lab scores, and both groups had similar increases in knowledge of microbiology, intrinsic motivation to study microbiology, as well as self-efficacy in the field of microbiology.Our data show that vLABs function just as well as face to face tutorials in preparing students for a physical lab activity in microbiology. The results imply that vLABs could be used instead of face to face tutorials, and a combination of virtual and physical lab exercises could be the future of science education.

Rust Contamination from Water Leaks in the Cosmic Dust Lab and Lunar and Meteorite Thin Sections Labs at Johnson Space Center

Science.gov (United States)

Kent, J. J.; Berger, E. L.; Fries, M. D.; Bastien, R.; McCubbin, F. M.; Pace, L.; Righter, K.; Sutter, B.; Zeigler, R. A.; Zolensky, M.

2017-01-01

On the early morning of September 15th, 2016, on the first floor of Building 31 at NASA-Johnson Space Center, the hose from a water chiller ruptured and began spraying water onto the floor. The water had been circulating though old metal pipes, and the leaked water contained rust-colored particulates. The water flooded much of the western wing of the building's ground floor before the leak was stopped, and it left behind a residue of rust across the floor, most notably in the Apollo and Meteorite Thin Section Labs and Sample Preparation Lab. No samples were damaged in the event, and the affected facilities are in the process of remediation. At the beginning of 2016, a separate leak occurred in the Cosmic Dust Lab, located in the same building. In that lab, a water leak occurred at the bottom of the sink used to clean the lab's tools and containers with ultra-pure water. Over years of use, the ultra-pure water eroded the metal sink piping and leaked water onto the inside of the lab's flow bench. This water also left behind a film of rusty material. The material was cleaned up and the metal piping was replaced with PVC pipe and sealed with Teflon plumber's tape. Samples of the rust detritus were collected from both incidents. These samples were imaged and analyzed to determine their chemical and mineralogical compositions. The purpose of these analyses is to document the nature of the detritus for future reference in the unlikely event that these materials occur as contaminants in the Cosmic Dust samples or Apollo or Meteorite thin sections.

Timing properties and pulse shape discrimination of LAB-based liquid scintillator

International Nuclear Information System (INIS)

Li Xiaobo; Xiao Hualin; Cao Jun; Li Jin; Heng Yuekun; Ruan Xichao

2011-01-01

Linear Alkyl Benzene (LAB) is a promising liquid scintillator solvent in neutrino experiments because it has many appealing properties. The timing properties of LAB-based liquid scintillator have been studied through ultraviolet and ionization excitation in this study. The decay time of LAB, PPO and bis-MSB is found to be 48.6 ns, 1.55 ns and 1.5 ns, respectively. A model can describe the absorption and re-emission process between PPO and bis-MSB perfectly. The energy transfer time between LAB and PPO with different concentrations can be obtained via another model. We also show that the LAB-based liquid scintillator has good (n, γ) and (α, γ) discrimination power. (authors)

Lab experiments in demographic fieldwork: Understanding gender dynamics in Africa

Directory of Open Access Journals (Sweden)

F. Nii-Amoo Dodoo

2014-12-01

Full Text Available Background: Anthropological literature has long linked bridewealth payments to decision-making about fertility. Recent research underscores the significance of men's preferences regarding women's reproductive behavior, and suggests that bridewealth payments place constraints on women's reproductive autonomy. Yet because survey data on bridewealth are rare, and the collection of new survey data on bridewealth presents serious challenges, this explanation could not be tested. Objective: Our objective in this paper is to highlight the potential utility of lab experiments (in particular, vignette experiments for improving our understanding of gender relations in Africa, using the hypothesized effect of bridewealth on normative constraints on women's reproductive autonomy as an illustration. Methods: We discuss our reasons for turning to lab experiments, and to vignette experiments in particular. We also summarize a series of studies (Horne, Dodoo, and Dodoo 2013; Dodoo, Horne, and Biney 2014 which have implemented our experimental approach. Results: Our experimental evidence shows that bridewealth payments are associated with greater normative constraints on women's reproductive autonomy. We also find that these negative effects of bridewealth are consistent across participant ages, and do not appear to be ameliorated by female schooling. Conclusions: We conclude that lab experiments in general (and vignette experiments in particular are underutilized methodological tools that may be useful for helping us gain a better understanding of the cultural context of gender relations in Africa; and that demographic research more generally may benefit from taking advantage of the strengths of experimental methods.

A Moodle extension to book online labs

Directory of Open Access Journals (Sweden)

Antonio C. Cardoso

2005-11-01

Full Text Available The social constructivist philosophy of Moodle makes it an excellent choice to deliver e-learning contents that require collaborative activities, such as those that are associated with online labs. In the case of online labs that enable web access to real devices (remote workbenches, access time should be reserved beforehand. A booking tool will avoid access conflicts and at the same time will help the students to organise their time and activities. This paper presents a Moodle extension that was developed within the Leonardo da Vinci MARVEL project, with the objective of meeting this requirement. The booking tool presented enables resource sharing in general and may be used to organise access to any type of scarce resources, such as to online labs and to the videoconferencing rooms that are needed to support collaborative activities.

Long-term outcomes of young people who attempted suicide

NARCIS (Netherlands)

Grisham, Jessica R; Williams, Alishia D

2014-01-01

IMPORTANCE Suicidal behavior has increased since the onset of the global recession, a trend that may have long-term health and social implications. OBJECTIVE To test whether suicide attempts among young people signal increased risk for later poor health and social functioning above and beyond a

Design, realization and test of C-band accelerating structures for the SPARC-LAB linac energy upgrade

International Nuclear Information System (INIS)

Alesini, D.; Bellaveglia, M.; Biagini, M.E.; Boni, R.; Brönnimann, M.; Cardelli, F.; Chimenti, P.; Clementi, R.; Di Pirro, G.; Di Raddo, R.; Ferrario, M.; Ficcadenti, L.; Gallo, A.; Kalt, R.; Lollo, V.; Palumbo, L.; Piersanti, L.; Schilcher, T.

2016-01-01

The energy upgrade of the SPARC-LAB photo-injector at LNF-INFN (Frascati, Italy) has been originally conceived replacing one low gradient (13 MV/m) 3 m long SLAC type S-band traveling wave (TW) section with two 1.4 m long C-band accelerating sections. Due to the higher gradients reached by such structures, a higher energy beam can be obtained within the same accelerator footprint length. The use of C-band structures for electron acceleration has been adopted in a few FEL linacs in the world, among others, the Japanese Free Electron Laser at SPring-8 and the SwissFEL at Paul Scherrer Institute (PSI). The C-band sections are traveling wave, constant impedance structures with symmetric input and output axial couplers. Their design has been optimized for the operation with a SLED RF pulse compressor. In this paper we briefly review their design criteria and we focus on the construction, tuning, low and high-power RF tests. We also illustrate the design and realization of the dedicated low level RF system that has been done in collaboration with PSI in the framework of the EU TIARA project. Preliminary experimental results appear to confirm the operation of such structures with accelerating gradients larger than 35 MV/m.

Design, realization and test of C-band accelerating structures for the SPARC-LAB linac energy upgrade

Energy Technology Data Exchange (ETDEWEB)

Alesini, D.; Bellaveglia, M.; Biagini, M.E.; Boni, R. [INFN Laboratori Nazionali di Frascati, Via Enrico Fermi 40, 00044, Frascati (Italy); Brönnimann, M. [Paul Scherrer Institut, 5232 Villigen (Switzerland); Cardelli, F. [INFN Sezione di Roma, P.le Aldo Moro 2, 00185, Roma (Italy); Università di Roma “La Sapienza”, P.le Aldo Moro 2, 00185, Roma (Italy); Chimenti, P.; Clementi, R.; Di Pirro, G.; Di Raddo, R.; Ferrario, M. [INFN Laboratori Nazionali di Frascati, Via Enrico Fermi 40, 00044, Frascati (Italy); Ficcadenti, L. [INFN Sezione di Roma, P.le Aldo Moro 2, 00185, Roma (Italy); Università di Roma “La Sapienza”, P.le Aldo Moro 2, 00185, Roma (Italy); Gallo, A. [INFN Laboratori Nazionali di Frascati, Via Enrico Fermi 40, 00044, Frascati (Italy); Kalt, R. [Paul Scherrer Institut, 5232 Villigen (Switzerland); Lollo, V. [INFN Laboratori Nazionali di Frascati, Via Enrico Fermi 40, 00044, Frascati (Italy); Palumbo, L. [INFN Sezione di Roma, P.le Aldo Moro 2, 00185, Roma (Italy); Università di Roma “La Sapienza”, P.le Aldo Moro 2, 00185, Roma (Italy); Piersanti, L., E-mail: luca.piersanti@lnf.infn.it [INFN Sezione di Roma, P.le Aldo Moro 2, 00185, Roma (Italy); Università di Roma “La Sapienza”, P.le Aldo Moro 2, 00185, Roma (Italy); Schilcher, T. [Paul Scherrer Institut, 5232 Villigen (Switzerland)

2016-11-21

The energy upgrade of the SPARC-LAB photo-injector at LNF-INFN (Frascati, Italy) has been originally conceived replacing one low gradient (13 MV/m) 3 m long SLAC type S-band traveling wave (TW) section with two 1.4 m long C-band accelerating sections. Due to the higher gradients reached by such structures, a higher energy beam can be obtained within the same accelerator footprint length. The use of C-band structures for electron acceleration has been adopted in a few FEL linacs in the world, among others, the Japanese Free Electron Laser at SPring-8 and the SwissFEL at Paul Scherrer Institute (PSI). The C-band sections are traveling wave, constant impedance structures with symmetric input and output axial couplers. Their design has been optimized for the operation with a SLED RF pulse compressor. In this paper we briefly review their design criteria and we focus on the construction, tuning, low and high-power RF tests. We also illustrate the design and realization of the dedicated low level RF system that has been done in collaboration with PSI in the framework of the EU TIARA project. Preliminary experimental results appear to confirm the operation of such structures with accelerating gradients larger than 35 MV/m.

Prevalence of suicide attempts among Chinese adolescents: A meta-analysis of cross-sectional studies.

Science.gov (United States)

Hu, Jiande; Dong, Yonghai; Chen, Xiaodan; Liu, Yun; Ma, Dongyang; Liu, Xiaoyun; Zheng, Ruizhi; Mao, Xiangqun; Chen, Ting; He, Wei

2015-08-01

According to World Health Organization, for every committed suicide there were 20 suicide attempts at least. In the last decade, despite the increasing awareness on suicide attempts among adolescents in China, there has been no comprehensive system reporting vital statistics. Consequently, the prevalence of suicide attempts reported in some studies ranged variedly. Therefore, the purpose of this study was to provide the first meta-analysis of cross-sectional studies of suicide attempts to fill this gap. Two reviewers independently screened potentially relevant cross-sectional studies of suicide attempts through PubMed-Medline, Embase, Wanfang Data, Chongqing VIP and Chinese National Knowledge Infrastructure databases using the core terms 'suicid*'/'suicide attempt*'/'attempted suicide' and 'adolescen*'/'youth'/'child*'/'student*' and 'China'/'Chinese' in the article titles, abstracts and keywords. Chi-square based Q test and I(2) statistic assessed the heterogeneity. Forest plot was used to display results graphically. Potential publication bias was assessed by the funnel plot, Begg's and Egger's test. In total, 43 studies with 200,124 participants met the eligibility criteria. The pooled prevalence of suicide attempts among Chinese adolescents was 2.94% (95% CI: 2.53%-3.41%). Substantial heterogeneity in prevalence estimates was revealed. Subgroup analyses showed that the prevalence for males was 2.50% (95% CI: 2.08%-3.01%), and for females was 3.17% (95% CI: 2.56%-3.91%). In sum, abstracting across the literatures, the prevalence of suicide attempts among Chinese adolescents was moderate compared with other countries around the world. Necessary measures should be set out prevent them in the future. Copyright © 2015 Elsevier Inc. All rights reserved.

Advanced Active Acoustics Lab (AAAL)

Data.gov (United States)

Federal Laboratory Consortium — The Advanced Active Acoustics Lab (AAAL) is a state-of-the-art Undersea Warfare (USW) acoustic data analysis facility capable of both active and passive underwater...

Towards Third-Generation Living Lab Networks in Cities

Directory of Open Access Journals (Sweden)

Seppo Leminen

2017-11-01

Full Text Available Many cities engage in diverse experimentation, innovation, and development activities with a broad variety of environments and stakeholders to the benefit of citizens, companies, municipalities, and other organizations. Hence, this article discusses such engagement in terms of next-generation living lab networks in the city context. In so doing, the study contributes to the discussion on living labs by introducing a framework of collaborative innovation networks in cities and suggesting a typology of third-generation living labs. Our framework is characterized by diverse platforms and participation approaches, resulting in four distinctive modes of collaborative innovation networks where the city is: i a provider, ii a neighbourhood participator, iii a catalyst, or iv a rapid experimenter. The typology is based on an analysis of 118 interviews with participants in six Finnish cities and reveals various ways to organize innovation activities in the city context. In particular, cities can benefit from innovation networks by simultaneously exploiting multiple platforms such as living labs for innovation. We conclude by discussing implications to theory and practice, and suggesting directions for future research.

Reaction of LaB6 with MoSi2

International Nuclear Information System (INIS)

Ordan'yan, S.S.; Gardagina, E.N.; Barabanova, S.N.

1989-01-01

Investigation results of interaction in LaB 6 -MoSi 2 system within wide concentration and temperature ranges are presented. LaB 6 and MoSi 2 powders were preliminary squeezed out in vacuum at 1470 K. Presence of LaB 6 and MoSi 2 initial phases only is determined using X-ray pahse analysis of sintered and melted specimens of all compositions. Traces of MoB (probably, due to quick crystallization after melting and partial evaporation of silicon from the melt) are detected in some alloys exposed to melting

Study Labs Kortlægningsrapport UCSJ

DEFF Research Database (Denmark)

Jørnø, Rasmus Leth Vergmann; Hestbech, Astrid Margrethe; Gynther, Karsten

2015-01-01

Rapporten er en delleverance i det regionale forprojekt S​tudy Labs,​der udføres som et samarbejde mellem Holbæk, Odsherred og Kalundborg kommune og University College Sjælland (UCSJ). Samarbejdet er delvist medfinansieret af Region Sjælland. Rapporten behandler projektets etableringsfase...... for at nå de kommunale målsætninger. De potentielle målgrupper er blevet kortlagt. Samtidig er undersøgelser i brugergrupperne blevet gjort håndgribelige i form af Personaer. Kommunerne har, faciliteret af Educationlab, gennemført designworkshops og er fremkommet med designs for Study Labs, der som...

Electoral System Reform Attempts in Sub-Saharan Africa: South Africa, Lesotho, Kenya, and Zimbabwe

DEFF Research Database (Denmark)

Elklit, Jørgen

This paper provides a test of the generalizability of the barriers’ approach (Rahat and Hazan, 2011) to the study of electoral system reform attempts. It does so by examining a set of recent attempts of electoral system change in four Sub-Saharan countries (South Africa, Lesotho, Kenya...

Fracture resistance of prepared premolars restored with bonded new lab composite and all-ceramic inlay/onlay restorations: Laboratory study.

Science.gov (United States)

Wafaie, Ramy Ahmed; Ibrahim Ali, Ashraf; Mahmoud, Salah Hasab

2018-01-25

To assess the influence of new light curing lab composite, lithium-disilicate glass-ceramic and yttrium-stabilized zirconia-based ceramic on the fracture resistance of maxillary premolars with class II inlay and onlay preparations. Seventy sound maxillary premolars were divided randomly into seven main groups. The first group was left intact (control group). The remaining six groups were prepared with inlay and onlay cavities and restored with lab composite (SR Nexco), lithium-disilicate glass-ceramic (IPS e.max Press) and yttrium-stabilized zirconia-based ceramic (ICE Zirkon). The restorations were cemented with luting resin composite (Variolink N). All specimens were thermocycled 5000 cycles between 5°C ± 2°C and 55°C ± 2°C and were then cyclic loaded for 500 000 cycles. The specimens were subjected to a compressive load in a universal testing machine using a metal sphere until fracture occurred. The results were analyzed by 2-way ANOVA and Tukey HSD post hoc tests. The level of significance was set at P  .05). However, statistically significant differences were found among the means of control group and the groups restored with lab composite inlays, lab composite onlays, pressable glass ceramic inlays and pressable glass ceramic onlays (P lab composite is used. Conversely, when a ceramic material being used, the prepared teeth for inlay and onlay restorations showed a comparable strength to the intact teeth especially zirconia ceramic. Premolar teeth restored with zirconia ceramic inlays and onlays exhibited fracture resistance comparable to intact teeth. © 2018 Wiley Periodicals, Inc.

A New PC and LabVIEW Package Based System for Electrochemical Investigations.

Science.gov (United States)

Stević, Zoran; Andjelković, Zoran; Antić, Dejan

2008-03-15

The paper describes a new PC and LabVIEW software package based system forelectrochemical research. An overview of well known electrochemical methods, such aspotential measurements, galvanostatic and potentiostatic method, cyclic voltammetry andEIS is given. Electrochemical impedance spectroscopy has been adapted for systemscontaining large capacitances. For signal generation and recording of the response ofinvestigated electrochemical cell, a measurement and control system was developed, basedon a PC P4. The rest of the hardware consists of a commercially available AD-DA converterand an external interface for analog signal processing. The interface is a result of authorsown research. The software platform for desired measurement methods is LabVIEW 8.2package, which is regarded as a high standard in the area of modern virtual instruments. Thedeveloped system was adjusted, tested and compared with commercially available systemand ORCAD simulation.

Development and flight testing of UV optimized Photon Counting CCDs

Science.gov (United States)

Hamden, Erika T.

2018-06-01

I will discuss the latest results from the Hamden UV/Vis Detector Lab and our ongoing work using a UV optimized EMCCD in flight. Our lab is currently testing efficiency and performance of delta-doped, anti-reflection coated EMCCDs, in collaboration with JPL. The lab has been set-up to test quantum efficiency, dark current, clock-induced-charge, and read noise. I will describe our improvements to our circuit boards for lower noise, updates from a new, more flexible NUVU controller, and the integration of an EMCCD in the FIREBall-2 UV spectrograph. I will also briefly describe future plans to conduct radiation testing on delta-doped EMCCDs (both warm, unbiased and cold, biased configurations) thus summer and longer term plans for testing newer photon counting CCDs as I move the HUVD Lab to the University of Arizona in the Fall of 2018.

Undergraduate Student Construction and Interpretation of Graphs in Physics Lab Activities

Science.gov (United States)

Nixon, Ryan S.; Godfrey, T. J.; Mayhew, Nicholas T.; Wiegert, Craig C.

2016-01-01

Lab activities are an important element of an undergraduate physics course. In these lab activities, students construct and interpret graphs in order to connect the procedures of the lab with an understanding of the related physics concepts. This study investigated undergraduate students' construction and interpretation of graphs with best-fit…

Outreach Science Education: Evidence-Based Studies in a Gene Technology Lab

Science.gov (United States)

Scharfenberg, Franz-Josef; Bogner, Franz X.

2014-01-01

Nowadays, outreach labs are important informal learning environments in science education. After summarizing research to goals outreach labs focus on, we describe our evidence-based gene technology lab as a model of a research-driven outreach program. Evaluation-based optimizations of hands-on teaching based on cognitive load theory (additional…

Virtual Labs in proteomics: new E-learning tools.

Science.gov (United States)

Ray, Sandipan; Koshy, Nicole Rachel; Reddy, Panga Jaipal; Srivastava, Sanjeeva

2012-05-17

Web-based educational resources have gained enormous popularity recently and are increasingly becoming a part of modern educational systems. Virtual Labs are E-learning platforms where learners can gain the experience of practical experimentation without any direct physical involvement on real bench work. They use computerized simulations, models, videos, animations and other instructional technologies to create interactive content. Proteomics being one of the most rapidly growing fields of the biological sciences is now an important part of college and university curriculums. Consequently, many E-learning programs have started incorporating the theoretical and practical aspects of different proteomic techniques as an element of their course work in the form of Video Lectures and Virtual Labs. To this end, recently we have developed a Virtual Proteomics Lab at the Indian Institute of Technology Bombay, which demonstrates different proteomics techniques, including basic and advanced gel and MS-based protein separation and identification techniques, bioinformatics tools and molecular docking methods, and their applications in different biological samples. This Tutorial will discuss the prominent Virtual Labs featuring proteomics content, including the Virtual Proteomics Lab of IIT-Bombay, and E-resources available for proteomics study that are striving to make proteomic techniques and concepts available and accessible to the student and research community. This Tutorial is part of the International Proteomics Tutorial Programme (IPTP 14). Details can be found at: http://www.proteomicstutorials.org/. Copyright © 2012 Elsevier B.V. All rights reserved.

Thyroxine (T4) Test

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Thryoxine, Serum 485 p. Lab Tests ...

HPA axis hyperactivity and attempted suicide in young adult mood disorder inpatients.

Science.gov (United States)

Jokinen, Jussi; Nordström, Peter

2009-07-01

Hyperactivity of the Hypothalamic-Pituitary-Adrenal (HPA) axis is a consistent finding in Major Depressive Disorder (MDD) and most prospective studies of HPA-axis function have found that non-suppressors in the dexamethasone suppression test (DST) are more likely to commit suicide during follow-up. The results of studies on HPA-axis function and attempted suicide are less consistent. Suicide attempts are more common among young people than the elderly, whereas suicide is more common among the elderly. The impact of age related changes in HPA-axis system activity in relation to suicidal behaviour across the lifecycle may be of importance. The aim of the present study was to investigate the DST results in 36 young adult (30 years or younger) inpatients with mood disorder, with (n=18) and without suicide attempt at the index episode. The DST non-suppressor rate was 25% among young mood disorder inpatients. DST non-suppression was associated with suicide attempt and post-dexamethasone serum cortisol at 11:00 p.m. was significantly higher in suicide attempters compared to non-attempters. The DST non-suppressor rate was 39% in young adult suicide attempters compared with 11% in non-attempters. The results add to previous evidence in support of the role of HPA axis hyperactivity and suicidal behaviour. The present findings motivate to include HPA axis measures in the assessment of depression in young adults.

Development and Interaction between LMS Services and Remote Labs

Directory of Open Access Journals (Sweden)

Manuel Castro

2008-03-01

Full Text Available Nowadays there is a great number of universities and organizations working in e-learning and i-learning solutions. One of the most well-known is the learning management system or LMS that allows displaying theoretical content in an organized and controlled way. In some jobs and studies it is necessary for the student to get a practical knowledge as well as a theoretical one. To obtain this practical knowledge, the universities and organizations are developing Virtual, Remote and Web labs. At these moments the LMS and Web labs are working independently. We are studying a new architecture allowing the integration of the LMS with different Web labs. This architecture must allow the students, teachers and administrators to use the services of LMS and virtual lab’s features as if they were working with the same software.

Living lab: Format for rehearsing a new (service) practice

DEFF Research Database (Denmark)

Yndigegn, Signe; Aakjær, Marie Kirstejn

Citizen engagement and the citizens as a resource are key concepts in rethinking the Danish welfare system to meet the challenges of delivering better services for the elderly, while simultaneously reducing the cost of healthcare. In this method paper, we address how the co-design of new digital...... service platforms takes place in the format of living labs. We characterize living labs as the design of experiential spaces where ‘what is’ and ‘what could be’ are explored over a longer period of engagement. The labs are staged to integrate multiple stakeholders’ issues and resources and to create new...... technologies, concepts, or service designs. This paper unpacks the practices of living labs with questions of what is being produced, not only in terms of products, but also in terms of changes in practices, roles, and relations. To analyze and discuss this question the authors report about their engagement...

An overview of recent nucleon spin structure measurements at Jefferson Lab

Energy Technology Data Exchange (ETDEWEB)

Allada, Kalyan [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2016-02-01

Jefferson Lab have made significant contributions to improve our knowledge of the longitudinal spin structure by measuring polarized structure functions, g1 and g2, down to Q2 = 0.02 GeV2. The low Q2 data is especially useful in testing the Chiral Perturbation theory (cPT) calculations. The spin-dependent sum rules and the spin polarizabilities, constructed from the moments of g1 and g2, provide an important tool to study the longitudinal spin structure. We will present an overview of the experimental program to measure these structure functions at Jefferson Lab, and present some recent results on the neutron polarizabilities, proton g1 at low Q2, and proton and neutron d2 measurement. In addition to this, we will discuss the transverse spin structure of the nucleon which can be accessed using chiral-odd transversity distribution (h1), and show some results from measurements done on polarized 3He target in Hall A.

CELSTEC Learning Labs: Mobile App Development for Education and Training

NARCIS (Netherlands)

Specht, Marcus

2011-01-01

Specht, M. (2011). CELSTEC Learning Labs: Mobile App Development for Education and Training. Presentation given in Workshop at CELSTEC Learning Lab for Bluetea. February, 21, 2011, Heerlen, The Netherlands.

A lab-on-CD prototype for high-speed blood separation

International Nuclear Information System (INIS)

Zhang Jinlong; Liu Mei; Yang Jun; Guo Qiuquan

2008-01-01

Blood separation is the first step for subsequent blood tests in clinical diagnosis. Lab-on-a-chip technology provides an automatic, cost-effective and fast solution for a wide variety of blood analyses. The objective of this work is to design a new lab-on-CD microstructure capable of separating blood cells from the whole blood into different reservoirs directly. A CD platform including a microchannel network consisting of a straight main microchannel, a curved microchannel and a branching microchannel has been proposed. The merits of this design are its simple structure, less operating time and high separation efficiency because it utilizes multiple separation mechanisms, for instance, two centrifugal forces and Coriolis force. One centrifugal force is due to the system rotation; the other centrifugal force is due to the curvature of the specifically designed curved channel. In this work, systematical evaluation on the functionality and performance of such a design has been done. Ninety-nine per cent separation efficiency is achieved for diluted blood of 6% hematocrit

A lab-on-CD prototype for high-speed blood separation

Science.gov (United States)

Zhang, Jinlong; Guo, Qiuquan; Liu, Mei; Yang, Jun

2008-12-01

Blood separation is the first step for subsequent blood tests in clinical diagnosis. Lab-on-a-chip technology provides an automatic, cost-effective and fast solution for a wide variety of blood analyses. The objective of this work is to design a new lab-on-CD microstructure capable of separating blood cells from the whole blood into different reservoirs directly. A CD platform including a microchannel network consisting of a straight main microchannel, a curved microchannel and a branching microchannel has been proposed. The merits of this design are its simple structure, less operating time and high separation efficiency because it utilizes multiple separation mechanisms, for instance, two centrifugal forces and Coriolis force. One centrifugal force is due to the system rotation; the other centrifugal force is due to the curvature of the specifically designed curved channel. In this work, systematical evaluation on the functionality and performance of such a design has been done. Ninety-nine per cent separation efficiency is achieved for diluted blood of 6% hematocrit.

Pollution hazard closes neutrino lab

CERN Multimedia

Jones, Nicola

2003-01-01

"A leading astrophysics laboratory in Italy has closed down all but one of its experiments over concerns that toxic polluants could leak form the underground lab into the local water supply" (0.5 page)

Living Labs as boundary-spanners between Triple Helix actors

NARCIS (Netherlands)

van Geenhuizen, M.S.

2016-01-01

Living labs are an increasingly popular methodology to enhance innovation. Living labs aim to span boundaries between different organizations, among others Triple helix actors, by acting as a network organization typically in a real-life environment to foster co-creation by user-groups. This paper

Using EarthLabs to Enhance Earth Science Curriculum in Texas

Science.gov (United States)

Chegwidden, D. M.; Ellins, K. K.; Haddad, N.; Ledley, T. S.

2012-12-01

As an educator in Texas, a state that values and supports an Earth Science curriculum, I find it essential to educate my students who are our future voting citizens and tax payers. It is important to equip them with tools to understand and solve the challenges of solving of climate change. As informed citizens, students can help to educate others in the community with basic knowledge of weather and climate. They can also help to dispose of the many misconceptions that surround the climate change, which is perceived as a controversial topic. As a participant in a NSF-sponsored Texas Earth and Space (TXESS) Revolution teacher professional development program, I was selected to participate in a curriculum development project led by TERC to develop and test education resources for the EarthLabs climate literacy collection. I am involved in the multiple phases of the project, including reviewing labs that comprise the Climate, Weather and Biosphere module during the development phase, pilot teaching the module with my students, participating in research, and delivering professional development to other Texas teachers to expose them to the content found in the module and to encourage them to incorporate it into their teaching. The Climate, Weather and the Biosphere module emphasizes different forms of evidence and requires that learners apply different inquiry-based approaches to build the knowledge they need to develop as climate literate citizens. My involvement with the EarthLabs project has strengthened my overall knowledge and confidence to teach about Earth's climate system and climate change. In addition, the project has produced vigorous classroom discussion among my students as well as encouraged me to collaborate with other educators through our delivery of professional development to other teachers. In my poster, I will share my experiences, describe the impact the curriculum has made on my students, and report on challenges and valuable lessons gained by

An Annotated Math Lab Inventory.

Science.gov (United States)

Schussheim, Joan Yares

1980-01-01

A listing of mathematics laboratory material is organized as follows: learning kits, tape programs, manipulative learning materials, publications, math games, math lab library, and an alphabetized listing of publishers and/or companies offering materials. (MP)

Connect high speed analog-digital converter with EPICS based on LabVIEW

International Nuclear Information System (INIS)

Wang Wei; Chi Yunlong

2008-01-01

This paper introduce a method to connect high speed analog-digital converter (ADC212/100) with EPICS on Windows platform using LabVIEW. We use labVIEW to communicate with the converter, then use interface sub-VIs between LabVIEW and EPICS to access the EPICS IOC by Channel Access (CA). For the easy use graph programming language of LabVIEW, this method could shorten the develop period and reduce manpower cost. (authors)

Hydraulic fracture conductivity: effects of rod-shaped proppant from lattice-Boltzmann simulations and lab tests

Science.gov (United States)

Osiptsov, Andrei A.

2017-06-01

The goal of this study is to evaluate the conductivity of random close packings of non-spherical, rod-shaped proppant particles under the closure stress using numerical simulation and lab tests, with application to the conductivity of hydraulic fractures created in subterranean formation to stimulate production from oil and gas reservoirs. Numerical simulations of a steady viscous flow through proppant packs are carried out using the lattice Boltzmann method for the Darcy flow regime. The particle packings were generated numerically using the sequential deposition method. The simulations are conducted for packings of spheres, ellipsoids, cylinders, and mixtures of spheres with cylinders at various volumetric concentrations. It is demonstrated that cylinders provide the highest permeability among the proppants studied. The dependence of the nondimensional permeability (scaled by the equivalent particle radius squared) on porosity obtained numerically is well approximated by the power-law function: K /Rv2 = 0.204ϕ4.58 in a wide range of porosity: 0.3 ≤ ϕ ≤ 0.7. Lattice-Boltzmann simulations are cross-verified against finite-volume simulations using Navier-Stokes equations for inertial flow regime. Correlations for the normalized beta-factor as a function of porosity and normalized permeability are presented as well. These formulae are in a good agreement with the experimental measurements (including packings of rod-shaped particles) and existing laboratory data, available in the porosity range 0.3 ≤ ϕ ≤ 0.5. Comparison with correlations by other authors is also given.

Electronics lab instructors' approaches to troubleshooting instruction

Science.gov (United States)

Dounas-Frazer, Dimitri R.; Lewandowski, H. J.

2017-06-01

In this exploratory qualitative study, we describe instructors' self-reported practices for teaching and assessing students' ability to troubleshoot in electronics lab courses. We collected audio data from interviews with 20 electronics instructors from 18 institutions that varied by size, selectivity, and other factors. In addition to describing participants' instructional practices, we characterize their perceptions about the role of troubleshooting in electronics, the importance of the ability to troubleshoot more generally, and what it means for students to be competent troubleshooters. One major finding of this work is that, while almost all instructors in our study said that troubleshooting is an important learning outcome for students in electronics lab courses, only half of instructors said they directly assessed students' ability to troubleshoot. Based on our findings, we argue that there is a need for research-based instructional materials that attend to both cognitive and noncognitive aspects of troubleshooting proficiency. We also identify several areas for future investigation related to troubleshooting instruction in electronics lab courses.

The Influence of Tablet PCs on Students' Use of Multiple Representations in Lab Reports

Science.gov (United States)

Guelman, Clarisa Bercovich; De Leone, Charles; Price, Edward

2009-11-01

This study examined how different tools influenced students' use of representations in the Physics laboratory. In one section of a lab course, every student had a Tablet PC that served as a digital-ink based lab notebook. Students could seamlessly create hand-drawn graphics and equations, and write lab reports on the same computer used for data acquisition, simulation, and analysis. In another lab section, students used traditional printed lab guides, kept paper notebooks, and then wrote lab reports on regular laptops. Analysis of the lab reports showed differences between the sections' use of multiple representations, including an increased use of diagrams and equations by the Tablet users.

Interfacing LabVIEW With Instrumentation for Electronic Failure Analysis and Beyond

Science.gov (United States)

Buchanan, Randy K.; Bryan, Coleman; Ludwig, Larry

1996-01-01

The Laboratory Virtual Instrumentation Engineering Workstation (LabVIEW) software is designed such that equipment and processes related to control systems can be operationally lined and controlled by the use of a computer. Various processes within the failure analysis laboratories of NASA's Kennedy Space Center (KSC) demonstrate the need for modernization and, in some cases, automation, using LabVIEW. An examination of procedures and practices with the Failure Analaysis Laboratory resulted in the conclusion that some device was necessary to elevate the potential users of LabVIEW to an operational level in minimum time. This paper outlines the process involved in creating a tutorial application to enable personnel to apply LabVIEW to their specific projects. Suggestions for furthering the extent to which LabVIEW is used are provided in the areas of data acquisition and process control.

Dramatyping: a generic algorithm for detecting reasonable temporal correlations between drug administration and lab value alterations

Directory of Open Access Journals (Sweden)

Axel Newe

2016-03-01

Full Text Available According to the World Health Organization, one of the criteria for the standardized assessment of case causality in adverse drug reactions is the temporal relationship between the intake of a drug and the occurrence of a reaction or a laboratory test abnormality. This article presents and describes an algorithm for the detection of a reasonable temporal correlation between the administration of a drug and the alteration of a laboratory value course. The algorithm is designed to process normalized lab values and is therefore universally applicable. It has a sensitivity of 0.932 for the detection of lab value courses that show changes in temporal correlation with the administration of a drug and it has a specificity of 0.967 for the detection of lab value courses that show no changes. Therefore, the algorithm is appropriate to screen the data of electronic health records and to support human experts in revealing adverse drug reactions. A reference implementation in Python programming language is available.

Personality and attempted suicide. Analysis of anger, aggression and impulsivity.

Science.gov (United States)

Giegling, Ina; Olgiati, Paolo; Hartmann, Annette M; Calati, Raffaella; Möller, Hans-Jürgen; Rujescu, Dan; Serretti, Alessandro

2009-12-01

Suicide is one of the leading causes of death worldwide, mortality from suicide being approximately 2%. Attempted suicide appears to be a major risk factor for suicide completion. Anger, aggression and impulsivity are personality traits associated with suicide attempt. In this study we analysed a part of a previously reported sample in order to test anger, impulsivity and temperament/character scales as predictors of aggression and self-aggression in suicide attempters and to compare anger- and aggression-related traits between impulsive and premeditated suicide attempts as well as between violent and non-violent suicide methods. One-hundred-eleven consecutively admitted inpatients with a lifetime history of attempted suicide were assessed for anger (State-Trait Anger Expression Inventory, STAXI), aggression (Questionnaire for Measuring Factors of Aggression, FAF) and temperament/character (Temperament and Character Inventory, TCI). Higher aggression scores, as measured by FAF, were predicted by being male, meeting criteria for borderline personality disorder and having higher angry temperament scores as assessed by STAXI; low cooperativeness was also associated with aggression but not after controlling for STAXI scales. TCI dimensions associated with self-aggression were high harm avoidance, high impulsivity and low self-directedness; state anger, inwardly directed anger and inhibition of aggression were also predictors of self-aggression. In conclusion, impulsivity and harm avoidance have emerged as temperament dimensions independently associated with self-aggressive tendencies in personality. Such interactions could explain the correlation between temperament and suicidality but further research is needed. Anger and self-directedness appear to have some effects on suicide attempt.

Testing hypotheses and the advancement of science: recent attempts to falsify the equilibrium point hypothesis.

Science.gov (United States)

Feldman, Anatol G; Latash, Mark L

2005-02-01

Criticisms of the equilibrium point (EP) hypothesis have recently appeared that are based on misunderstandings of some of its central notions. Starting from such interpretations of the hypothesis, incorrect predictions are made and tested. When the incorrect predictions prove false, the hypothesis is claimed to be falsified. In particular, the hypothesis has been rejected based on the wrong assumptions that it conflicts with empirically defined joint stiffness values or that it is incompatible with violations of equifinality under certain velocity-dependent perturbations. Typically, such attempts use notions describing the control of movements of artificial systems in place of physiologically relevant ones. While appreciating constructive criticisms of the EP hypothesis, we feel that incorrect interpretations have to be clarified by reiterating what the EP hypothesis does and does not predict. We conclude that the recent claims of falsifying the EP hypothesis and the calls for its replacement by EMG-force control hypothesis are unsubstantiated. The EP hypothesis goes far beyond the EMG-force control view. In particular, the former offers a resolution for the famous posture-movement paradox while the latter fails to resolve it.

Characterization of Lactic Acid Bacteria (LAB) isolated from Indonesian shrimp paste (terasi)

Science.gov (United States)

Amalia, U.; Sumardianto; Agustini, T. W.

2018-02-01

Shrimp paste was one of fermented products, popular as a taste enhancer in many dishes. The processing of shrimp paste was natural fermentation, depends on shrimp it self and the presence of salt. The salt inhibits the growth of undesirable microorganism and allows the salt-tolerant lactic acid bacteria (LAB) to ferment the protein source to lactic acids. The objectives of this study were to characterize LAB isolated from Indonesian shrimp paste or "Terasi" with different times of fermentation (30, 60 and 90 days). Vitech analysis showed that there were four strains of the microorganism referred to as lactic acid bacteria (named: LABS1, LABS2, LABS3 and LABS4) with 95% sequence similarity. On the basis of biochemical, four isolates represented Lactobacillus, which the name Lactobacillus plantarum is proposed. L.plantarum was play role in resulting secondary metabolites, which gave umami flavor in shrimp paste.

A Remote Direct Sequence Spread Spectrum Communications Lab Utilising the Emona DATEx

Directory of Open Access Journals (Sweden)

Cosmas Mwikirize

2012-12-01

Full Text Available Remote labs have become popular learning aids due to their versatility and considerable ease of utilisation as compared to their physical counterparts. At Makerere University, the remote labs are based on the standard Massachusetts Institute of Technology (MIT iLabs Shared Architecture (ISA - a scalable and generic platform. Presented in this paper is such a lab, addressing the key practical aspects of Direct Sequence Spread Spectrum (DSSS communication. The lab is built on the National Instruments Educational Laboratory Virtual Instrumentation Suite (NI ELVIS with the Emona Digital and Analog Telecommunications Experimenter (DATEx add-on board. It also incorporates switching hardware. The lab facilitates real-time control of the equipment, with users able to set, manipulate and observe signal parameters in both the frequency and the time domains. Simulation and data Acquisition modes of the experiment are supported to provide a richer learning experience.

Increased impulsivity associated with severity of suicide attempt history in patients with bipolar disorder.

Science.gov (United States)

Swann, Alan C; Dougherty, Donald M; Pazzaglia, Peggy J; Pham, Mary; Steinberg, Joel L; Moeller, F Gerard

2005-09-01

Impulsivity is a prominent and measurable characteristic of bipolar disorder that can contribute to risk for suicidal behavior. The purpose of this study was to investigate the relationship between impulsivity and severity of past suicidal behavior, a potential predictor of eventual suicide, in patients with bipolar disorder. In bipolar disorder subjects with either a definite history of attempted suicide or no such history, impulsivity was assessed with both a questionnaire (Barratt Impulsiveness Scale) and behavioral laboratory performance measures (immediate memory/delayed memory tasks). Diagnosis was determined with the Structured Clinical Interview for DSM-IV. Interviews of patients and review of records were used to determine the number of past suicide attempts and the medical severity of the most severe attempt. Subjects with a history of suicide attempts had more impulsive errors on the immediate memory task and had shorter response latencies, especially for impulsive responses. Impulsivity was highest in subjects with the most medically severe suicide attempts. Effects were not accounted for by presence of depression or mania at the time of testing. Barratt Impulsiveness Scale scores were numerically, but not significantly, higher in subjects with suicide attempts. A history of alcohol abuse was associated with greater probability of a suicide attempt. Multivariate analysis showed that ethanol abuse history and clinical state at the time of testing did not have a significant effect after impulsivity was taken into account. These results suggest that a history of severe suicidal behavior in patients with bipolar disorder is associated with impulsivity, manifested as a tendency toward rapid, unplanned responses.

First results on GlioLab/GlioSat Precursors Missions

Science.gov (United States)

Cappelletti, Chantal; Notarangelo, Angelo; Demoss, Darrin; Carella, Massimo

2012-07-01

Since 2009 GAUSS group is involved in a joint collaboration with Morehead State University (MSU) Space Science Center and IRCCS Casa Sollievo della Sofferenza (CSS) research labs with the aim to design a biomedical project in order to investigate if the combined effects of microgravity conditions and ionizing radiation increase or decrease the survival rate of cancer cells. The biological sample consists of Glioblastoma cancer cell line ANGM-CSS. Glioblastoma is a kind of cancer that can be treated after surgery only by radiotherapy using ionizing radiation. This treatment, anyway, results in a very low survival rate. This project uses different university space platforms: a CubeLab, named GlioLab, on board the International Space Station and the university microsatellite UniSat-5 designed by GAUSS. In addition a GlioLab/GlioSat precursor experiment has already flown two times with the Space Shuttle during the missions STS-134 and STS-135. The phase 0 or the precursor of GlioLab uses a COTS system, named Liquid Mixing Apparatus (LMA), to board the biological samples inside the Space Shuttle for thirty day . The LMA allows to board liquids inside a vial but is not equipped with environment control system. After landing the samples were investigated by researchers at CSS in Italy and at MSU in Kentucky. This paper deals with the experimental set up and the results obtained during the STS-134 and STS-135 missions and with the new evidences on the behavior of this kind of cancer. In particular the results obtained on the DNA analysis give a confirmation of the original idea of GLioLab/Gliosat project justifying the development of the two systems.

Aviation Systems Test and Integration Lab (AvSTIL)

Data.gov (United States)

Federal Laboratory Consortium — The Aviation Systems Test and Integration Laboratory offers an innovative approach to aviation system and subsystem testing by fully immersing aviation platforms in...

Troponins Test

Science.gov (United States)

... lab's website in order to provide you with background information about the test(s) you had performed. You will need to return ... C, Banfi G, Guidi GC. Influence of a half-marathon run on NT-proBNP and troponin ... MedlinePlus Medical Encyclopedia [On-line information]. Available online ...

Aerial view of the water reservoirs for Lab II

CERN Multimedia

1974-01-01

Two large reservoirs (5000 m3 each) were built on the Swiss part of the site (Lab I is on the left). The water was drawn from the pumping station at Le Vengeron on Lac Léman, through a 10 km long pipe to be distributed over all Lab II.

Failing the Future: Three Unsuccessful Attempts to Replicate Bem's ‘Retroactive Facilitation of Recall’ Effect

Science.gov (United States)

Ritchie, Stuart J.; Wiseman, Richard; French, Christopher C.

2012-01-01

Nine recently reported parapsychological experiments appear to support the existence of precognition. We describe three pre-registered independent attempts to exactly replicate one of these experiments, ‘retroactive facilitation of recall’, which examines whether performance on a memory test can be influenced by a post-test exercise. All three replication attempts failed to produce significant effects (combined n = 150; combined p = .83, one-tailed) and thus do not support the existence of psychic ability. PMID:22432019

Factors accounting for youth suicide attempt in Hong Kong: a model building.

Science.gov (United States)

Wan, Gloria W Y; Leung, Patrick W L

2010-10-01

This study aimed at proposing and testing a conceptual model of youth suicide attempt. We proposed a model that began with family factors such as a history of physical abuse and parental divorce/separation. Family relationship, presence of psychopathology, life stressors, and suicide ideation were postulated as mediators, leading to youth suicide attempt. The stepwise entry of the risk factors to a logistic regression model defined their proximity as related to suicide attempt. Path analysis further refined our proposed model of youth suicide attempt. Our originally proposed model was largely confirmed. The main revision was dropping parental divorce/separation as a risk factor in the model due to lack of significant contribution when examined alongside with other risk factors. This model was cross-validated by gender. This study moved research on youth suicide from identification of individual risk factors to model building, integrating separate findings of the past studies.

Application of DICOM Standard in LabVIEW Environment

Directory of Open Access Journals (Sweden)

Dušan KONIAR

2008-01-01

Full Text Available DICOM is the world standard for picture archiving and communication in medicine. Development system LabVIEW based on graphical programming is primary designed for virtual instrumentation, it offers many tools and operators for image processing and analysis, but it does not directly support the work with DICOM standard. The article deals with possibility of importing native DICOM files to LabVIEW and work with them.

PlanetLab Europe as Geographically-Distributed Testbed for Software Development and Evaluation

Directory of Open Access Journals (Sweden)

Dan Komosny

2015-01-01

Full Text Available In this paper, we analyse the use of PlanetLab Europe for development and evaluation of geographically-oriented Internet services. PlanetLab is a global research network with the main purpose to support development of new Internet services and protocols. PlanetLab is divided into several branches; one of them is PlanetLab Europe. PlanetLab Europe consists of about 350 nodes at 150 geographically different sites. The nodes are accessible by remote login, and the users can run their software on the nodes. In the paper, we study the PlanetLab's properties that are significant for its use as a geographically distributed testbed. This includes node position accuracy, services availability and stability. We find a considerable number of location inaccuracies and a number of services that cannot be considered as reliable. Based on the results we propose a simple approach to nodes selection in testbeds for geographically-oriented Internet services development and evaluation.

78 FR 60245 - Privacy Act Systems of Records; LabWare Laboratory Information Management System

Science.gov (United States)

2013-10-01

... of Records; LabWare Laboratory Information Management System AGENCY: Animal and Plant Health... system of records, entitled LabWare Laboratory Information Management System (LabWare LIMS), to maintain... Affairs, OMB. Thomas J. Vilsack, Secretary. SYSTEM NAME: LabWare Laboratory Information Management System...

Emergency Department Youth Patients With Suicidal Ideation or Attempts: Predicting Suicide Attempts Through 18 Months of Follow-Up.

Science.gov (United States)

Rosenbaum Asarnow, Joan; Berk, Michele; Zhang, Lily; Wang, Peter; Tang, Lingqi

2017-10-01

This prospective study of suicidal emergency department (ED) patients (ages 10-18) examined the timing, cumulative probability, and predictors of suicide attempts through 18 months of follow-up. The cumulative probability of attempts was as follows: .15 at 6 months, .22 at 1 year, and .24 by 18 months. One attempt was fatal, yielding a death rate of .006. Significant predictors of suicide attempt risk included a suicide attempt at ED presentation (vs. suicidal ideation only), nonsuicidal self-injurious behavior, and low levels of delinquent symptoms. Results underscore the importance of both prior suicide attempts and nonsuicidal self-harm as risk indicators for future and potentially lethal suicide attempts. © 2016 The American Association of Suicidology.

Leaching behaviour of incineration bottom ash in a reuse scenario: 12years-field data vs. lab test results.

Science.gov (United States)

Di Gianfilippo, Martina; Hyks, Jiri; Verginelli, Iason; Costa, Giulia; Hjelmar, Ole; Lombardi, Francesco

2018-03-01

Several types of standardized laboratory leaching tests have been developed during the past few decades to evaluate the leaching behaviour of waste materials as a function of different parameters, such as the pH of the eluate and the liquid to solid ratio. However, the link between the results of these tests and leaching data collected from the field (e.g. in disposal or reuse scenarios) is not always straightforward. In this work, we compare data obtained from an on-going large scale field trial, in which municipal solid waste incineration bottom ash is being tested as road sub-base material, with the results obtained from percolation column and pH-dependence laboratory leaching tests carried out on the bottom ash at the beginning of the test. The comparisons reported in this paper show that for soluble substances (e.g. Cl, K and SO 4 ), percolation column tests can provide a good indication of the release expected in the field with deviations usually within a factor of 3. For metals characterized by a solubility-controlled release, i.e. that depends more on eluate pH than the liquid to solid ratio applied, the results of pH-dependence tests describe more accurately the eluate concentration trends observed in the field with deviations that in most cases (around 80%) are within one order of magnitude (see e.g. Al and Cd). The differences between field and lab-scale data might be in part ascribed to the occurrence in the field of weathering reactions (e.g. carbonation) but also to microbial decomposition of organic matter that modifying leachate pH affect the solubility of several constituents (e.g. Ca, Ba and Cr). Besides, weathering reactions can result in enhanced adsorption of fulvic acids to iron/aluminum (hydr)oxides, leading to a decrease in the leaching of fulvic acids and hence of elements such as Cu, Ni and Pb that strongly depend on DOC leaching. Overall, this comparison shows that percolation column tests and pH-dependence tests can represent a reliable

An attempt for a unified description of mechanical testing on Zircaloy-4 cladding subjected to simulated LOCA transient

Directory of Open Access Journals (Sweden)

Desquines Jean

2016-01-01

Full Text Available During a Loss Of Coolant Accident (LOCA, an important safety requirement is that the reflooding of the core by the emergency core cooling system should not lead to a complete rupture of the fuel rods. Several types of mechanical tests are usually performed in the industry to determine the degree of cladding embrittlement, such as ring compression tests or four-point bending of rodlets. Many other tests can be found in the open literature. However, there is presently no real intrinsic understanding of the failure conditions in these tests which would allow translation of the results from one kind of mechanical testing to another. The present study is an attempt to provide a unified description of the failure not directly depending on the tested geometry. This effort aims at providing a better understanding of the link between several existing safety criteria relying on very different mechanical testing. To achieve this objective, the failure mechanisms of pre-oxidized and pre-hydrided cladding samples are characterized by comparing the behavior of two different mechanical tests: Axial Tensile (AT test and “C”-shaped Ring Compression Test (CCT. The failure of samples in both cases can be described by usual linear elastic fracture mechanics theory. Using interrupted mechanical tests, metallographic examinations have evidenced that a set of parallel cracks are nucleated at the inner and outer surface of the samples just before failure, crossing both the oxide layer and the oxygen rich alpha layer. The stress intensity factors for multiple crack geometry are determined for both AT and CCT samples using finite element calculations. After each mechanical test performed on high temperature steam oxidized samples, metallography is then used to individually determine the crack depth and crack spacing. Using these two important parameters and considering the applied load at fracture, the stress intensity factor at failure is derived for each tested

Attenuation length measurements of a liquid scintillator with LabVIEW and reliability evaluation of the device

International Nuclear Information System (INIS)

Gao Long; Yu Boxiang; Ding Yayun

2013-01-01

An attenuation length measurement device was constructed using an oscilloscope and LabVIEW for signal acquisition and processing. The performance of the device has been tested in a variety of ways. The test results show that the set-up has a good stability and high precision (sigma/mean reached 0.4 percent). Besides, the accuracy of the measurement system will decrease by about 17 percent if a filter is used. The attenuation length of a gadolinium-loaded liquid scintillator (Gd-LS) was measured as 15.10±0.35 m where Gd-LS was heavily used in the Daya Bay Neutrino Experiment. In addition, one method based on the Beer-Lambert law was proposed to investigate the reliability of the measurement device, the R-square reached 0.9995. Moreover, three purification methods for Linear Alkyl Benzene (LAB) production were compared in the experiment. (authors)

The community FabLab platform: applications and implications in biomedical engineering.

Science.gov (United States)

Stephenson, Makeda K; Dow, Douglas E

2014-01-01

Skill development in science, technology, engineering and math (STEM) education present one of the most formidable challenges of modern society. The Community FabLab platform presents a viable solution. Each FabLab contains a suite of modern computer numerical control (CNC) equipment, electronics and computing hardware and design, programming, computer aided design (CAD) and computer aided machining (CAM) software. FabLabs are community and educational resources and open to the public. Development of STEM based workforce skills such as digital fabrication and advanced manufacturing can be enhanced using this platform. Particularly notable is the potential of the FabLab platform in STEM education. The active learning environment engages and supports a diversity of learners, while the iterative learning that is supported by the FabLab rapid prototyping platform facilitates depth of understanding, creativity, innovation and mastery. The product and project based learning that occurs in FabLabs develops in the student a personal sense of accomplishment, self-awareness, command of the material and technology. This helps build the interest and confidence necessary to excel in STEM and throughout life. Finally the introduction and use of relevant technologies at every stage of the education process ensures technical familiarity and a broad knowledge base needed for work in STEM based fields. Biomedical engineering education strives to cultivate broad technical adeptness, creativity, interdisciplinary thought, and an ability to form deep conceptual understanding of complex systems. The FabLab platform is well designed to enhance biomedical engineering education.

QBone University and Lab Interconnect Testbed (QUALIT). Final report

Energy Technology Data Exchange (ETDEWEB)

Teitelbaum, Benjamin

2001-10-19

The QUALIT grant funded two broad categories of work: (1) Project-wide QBone engineering, instrumentation, and integration; (2) Focused workshops and measurement work relating specifically to advanced university/DOE connectivity. Significant progress has been made in both areas and, to both, QUALIT funding has been a key enabling resource. This final report summarizes the accomplishments of the QUALIT project and explains changes to the technical focus of the project that, while significant, remained true to the overall project goal: to research, test, and deploy IP layer traffic differentiation to redress congestion-related end-to-end performance problems on key university-DOE lab paths.

A Simple, Successful Capacitor Lab

Science.gov (United States)

Ennis, William

2011-01-01

Capacitors are a fundamental component of modern electronics. They appear in myriad devices and in an enormous range of sizes. Although our students are taught the function and analysis of capacitors, few have the opportunity to use them in our labs.

The pharmacists' role in improving guideline compliance for thyroid function testing in patients with heart failure.

Science.gov (United States)

Ziman, Melanie E; Bui, Hien T; Smith, Craig S; Tsukiji, Lori A; Asmatey, Veda M; Chu, Steven B; Miano, John S

2012-04-01

This single-center retrospective pilot program's objective was to utilize outpatient pharmacists to improve laboratory test adherence in chronic heart failure (CHF) patients overdue for thyroid function testing, thereby demonstrating the value of the outpatient pharmacist and justifying possible clinical role expansion. Thyroid disorders may contribute to CHF development, progression, and exacerbation. Testing is the standard of care in CHF patients per American Heart Association's 2009 Guidelines. Delinquency was defined as labs not conducted within 1 year in patients with euthyroid history, within 6 months in patients with thyroid dysfunction, abnormal labs at any time without follow-up, or lab absence after thyroid medication initiation, adjustment, or discontinuation. Targeted 80 nonpregnant adult CHF patients with delinquent thyroid function tests were counseled to get thyroid labs at point of sale, via telephone, e-mail, or letter. In collaboration with physicians, pharmacists ordered thyroid-stimulating hormone (TSH) and free T4 (FT4) labs. For patients with abnormal laboratory results, pharmacists coordinated drug therapy and follow-up labs. Data were collected from November 1, 2009 to March 30, 2010. Seventy-two patients (90%) previously delinquent for thyroid function testing received relevant thyroid labs. Ten patients (12.5%) with abnormal thyroid function tests not on prior drug therapy received treatment.

Protein in Urine: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/proteininurine.html Protein in Urine To use the sharing features on this page, please enable JavaScript. What is a Protein in Urine Test? A protein in urine test ...

Berkeley Lab Laser Accelerator (BELLA) facility

Data.gov (United States)

Federal Laboratory Consortium — The Berkeley Lab Laser Accelerator (BELLA) facility (formerly LOASIS) develops advanced accelerators and radiation sources. High gradient (1-100 GV/m) laser-plasma...

Developing Guided Inquiry-Based Student Lab Worksheet for Laboratory Knowledge Course

Science.gov (United States)

Rahmi, Y. L.; Novriyanti, E.; Ardi, A.; Rifandi, R.

2018-04-01

The course of laboratory knowledge is an introductory course for biology students to follow various lectures practicing in the biology laboratory. Learning activities of laboratory knowledge course at this time in the Biology Department, Universitas Negeri Padang has not been completed by supporting learning media such as student lab worksheet. Guided inquiry learning model is one of the learning models that can be integrated into laboratory activity. The study aimed to produce student lab worksheet based on guided inquiry for laboratory knowledge course and to determine the validity of lab worksheet. The research was conducted using research and developmet (R&D) model. The instruments used in data collection in this research were questionnaire for student needed analysis and questionnaire to measure the student lab worksheet validity. The data obtained was quantitative from several validators. The validators consist of three lecturers. The percentage of a student lab worksheet validity was 94.18 which can be categorized was very good.

The implement of the interface between EPICS and LabVIEW

International Nuclear Information System (INIS)

Liu Jia; Wang Chunhong

2009-01-01

The control system of BEPCII (Beijing Electron Positron Collider) is based on EPICS (Experimental Physics and Industrial Control System). LabVIEW is often used to develop data acquisition system on Windows platform. EPICS IOC version 3.14 or later, can be currently running on windows. The SharedMemory developed by SNS (Spallation Neutron Source) can implement the interface between Windows IOC and LabVIEW. The paper describes the method how to use SharedMemory and a application of magnet measurement system, so that LabVIEW and EPICS can share data each other. (authors)

Advanced teaching labs in physics - celebrating progress; challenges ahead

Science.gov (United States)

Peterson, Richard

A few examples of optical physics experiments may help us first reflect on significant progress on how advanced lab initiatives may now be more effectively developed, discussed, and disseminated - as opposed to only 10 or 15 years back. Many cooperative developments of the last decade are having profound impacts on advanced lab workers and students. Central to these changes are the programs of the Advanced Laboratory Physics Association (ALPhA) (Immersions, BFY conferences), AAPT (advlab-l server, ComPADRE, apparatus competitions, summer workshops/sessions), APS (Reichert Award, FEd activities and sessions), and the Jonathan F. Reichert Foundation (ALPhA support and institution matched equipment grants for Immersion participants). Broad NSF support has helped undergird several of these initiatives. Two of the most significant challenges before this new advanced lab community are (a) to somehow enhance funding opportunities for teaching equipment and apparatus in an era of minimal NSF equipment support, and (b) to help develop a more complementary relationship between research-based advanced lab pedagogies and the development of fresh physics experiments that help enable the mentoring and experimental challenge of our students.

RiskLab - a joint Teaching Lab on Hazard and Risk Management

Science.gov (United States)

Baruffini, Mi.; Baruffini, Mo.; Thuering, M.

2009-04-01

and analyzed, and a second part, composed by practical activities, where students can learn specific statistical methods and test and use technical software. Special importance is given to seminars held by experts or members of Civil Protection and risk management institutes. Excursions are often organized to directly see and study practical case studies (Eg. The city of Locarno and the lake Maggiore inundations). The course is organized following a "classical" structure (it's mainly held in a class or in an informatics lab), but students can also benefit from a special web portal, powered by "e.coursers" , the official USI/SUPSI Learning Management System , where they can find issues and documents about natural hazards and risk management. The main pedagogical value is that students can attend a course which is entirely devoted to dealing with natural and man-made hazards and risk, allowing them to resume geological, space planning and economic issues and to face real case studies in a challenging and holistic environment. The final aim of the course is to provide students an useful and integrated "toolbox", essential to cope with and to resolve the overwhelming problems due to vulnerability and danger increase of the present-day society. The course has by now reached the third academic year and the initial results are encouraging: beyond the knowledge and expertise acquired, the graduate students, that are now for the most part working in engineering studies or private companies, have shown to have acquired a mentality devoted to understanding and managing risk. REFERENCES PLANAT HTTP://WWW.CENAT.CH/INDEX.PHP?USERHASH=79598753&L=D&NAVID=154 ECOURSES HTTP://CORSI.ELEARNINGLAB.ORG/ NAHRIS HTTP://WWW.NAHRIS.CH/

Gail Harlamoff: Executive Director, Life Lab Science Program

OpenAIRE

Rabkin, Sarah

2010-01-01

Gail Harlamoff is Executive Director of the Life Lab Science Program, a nationally recognized, award-winning nonprofit science and environmental organization located on the UC Santa Cruz campus. Founded in 1979, Life Lab helps schools develop gardens and implement curricula to enhance students’ learning about science, math, and the natural world. The program has trained tens of thousands of educators in more than 1400 schools across the country. Life Lab’s specialized initiatives inc...

Implementation of Siemens USS protocol into LabVIEW.

Science.gov (United States)

Hosek, P; Diblik, M

2011-10-01

This article gives basic overview of the USS protocol as a communication interface to drive Siemens frequency inverters. It presents our implementation of this protocol into LabVIEW, as there was permanent demand from the community of the users to have native LabVIEW implementation of the USS protocol. It also states encountered problems and their solutions. Copyright © 2011 Society for Laboratory Automation and Screening. Published by Elsevier Inc. All rights reserved.

Proposal for testing quantum gravity in the lab

International Nuclear Information System (INIS)

Ali, Ahmed Farag; Das, Saurya; Vagenas, Elias C.

2011-01-01

Attempts to formulate a quantum theory of gravitation are collectively known as quantum gravity. Various approaches to quantum gravity such as string theory and loop quantum gravity, as well as black hole physics and doubly special relativity theories predict a minimum measurable length, or a maximum observable momentum, and related modifications of the Heisenberg Uncertainty Principle to a so-called generalized uncertainty principle (GUP). We have proposed a GUP consistent with string theory, black hole physics, and doubly special relativity theories and have showed that this modifies all quantum mechanical Hamiltonians. When applied to an elementary particle, it suggests that the space that confines it must be quantized, and in fact that all measurable lengths are quantized in units of a fundamental length (which can be the Planck length). On the one hand, this may signal the breakdown of the spacetime continuum picture near that scale, and on the other hand, it can predict an upper bound on the quantum gravity parameter in the GUP, from current observations. Furthermore, such fundamental discreteness of space may have observable consequences at length scales much larger than the Planck scale. Because this influences all the quantum Hamiltonians in an universal way, it predicts quantum gravity corrections to various quantum phenomena. Therefore, in the present work we compute these corrections to the Lamb shift, simple harmonic oscillator, Landau levels, and the tunneling current in a scanning tunneling microscope.

Familial Pathways to Early-Onset Suicide Attempt

Science.gov (United States)

Brent, David A.; Melhem, Nadine M.; Oquendo, Maria; Burke, Ainsley; Birmaher, Boris; Stanley, Barbara; Biernesser, Candice; Keilp, John; Kolko, David; Ellis, Steve; Porta, Giovanna; Zelazny, Jamie; Iyengar, Satish; Mann, J. John

2015-01-01

IMPORTANCE Suicide attempts are strong predictors of suicide, a leading cause of adolescent mortality. Suicide attempts are highly familial, although the mechanisms of familial transmission are not understood. Better delineation of these mechanisms could help frame potential targets for prevention. OBJECTIVE To examine the mechanisms and pathways by which suicidal behavior is transmitted from parent to child. DESIGN, SETTING, AND PARTICIPANTS In this prospective study conducted from July 15, 1997, through June 21, 2012, a total of 701 offspring aged 10 to 50 years (mean age, 17.7 years) of 334 clinically referred probands with mood disorders, 191 (57.2%) of whom had also made a suicide attempt, were followed up for a mean of 5.6 years. MAIN OUTCOMES AND MEASURES The primary outcome was a suicide attempt. Variables were examined at baseline, intermediate time points, and the time point proximal to the attempt. Participants were assessed by structured psychiatric assessments and self-report and by interview measures of domains hypothesized to be related to familial transmission (eg, mood disorder and impulsive aggression). RESULTS Among the 701 offspring, 44 (6.3%) had made a suicide attempt before participating in the study, and 29 (4.1%) made an attempt during study follow-up. Multivariate logistic regression revealed that proband suicide attempt was a predictor of offspring suicide attempt (odds ratio [OR], 4.79; 95% CI, 1.75–13.07), even controlling for other salient offspring variables: baseline history of mood disorder (OR, 4.20; 95% CI, 1.37–12.86), baseline history of suicide attempt (OR, 5.69; 95% CI, 1.94–16.74), and mood disorder at the time point before the attempt (OR, 11.32; 95% CI, 2.29–56.00). Path analyses were consistent with these findings, revealing a direct effect of proband attempt on offspring suicide attempt, a strong effect of offspring mood disorder at each time point, and impulsive aggression as a precursor of mood disorder

Social emotion recognition, social functioning, and attempted suicide in late-life depression.

Science.gov (United States)

Szanto, Katalin; Dombrovski, Alexandre Y; Sahakian, Barbara J; Mulsant, Benoit H; Houck, Patricia R; Reynolds, Charles F; Clark, Luke

2012-03-01

: Lack of feeling connected and poor social problem solving have been described in suicide attempters. However, cognitive substrates of this apparent social impairment in suicide attempters remain unknown. One possible deficit, the inability to recognize others' complex emotional states has been observed not only in disorders characterized by prominent social deficits (autism-spectrum disorders and frontotemporal dementia) but also in depression and normal aging. This study assessed the relationship between social emotion recognition, problem solving, social functioning, and attempted suicide in late-life depression. : There were 90 participants: 24 older depressed suicide attempters, 38 nonsuicidal depressed elders, and 28 comparison subjects with no psychiatric history. We compared performance on the Reading the Mind in the Eyes test and measures of social networks, social support, social problem solving, and chronic interpersonal difficulties in these three groups. : Suicide attempters committed significantly more errors in social emotion recognition and showed poorer global cognitive performance than elders with no psychiatric history. Attempters had restricted social networks: they were less likely to talk to their children, had fewer close friends, and did not engage in volunteer activities, compared to nonsuicidal depressed elders and those with no psychiatric history. They also reported a pattern of struggle against others and hostility in relationships, felt a lack of social support, perceived social problems as impossible to resolve, and displayed a careless/impulsive approach to problems. : Suicide attempts in depressed elders were associated with poor social problem solving, constricted social networks, and disruptive interpersonal relationships. Impaired social emotion recognition in the suicide attempter group was related.

CSF and plasma testosterone in attempted suicide.

Science.gov (United States)

Stefansson, Jon; Chatzittofis, Andreas; Nordström, Peter; Arver, Stefan; Åsberg, Marie; Jokinen, Jussi

2016-12-01

Very few studies have assessed testosterone levels in the cerebrospinal fluid in suicide attempters. Aggressiveness and impulsivity are common behavioural traits in suicide attempters. Dual-hormone serotonergic theory on human impulsive aggression implies high testosterone/cortisol ratio acting on the amygdala and low serotonin in the prefrontal cortex. Our aim was to examine the CSF and plasma testosterone levels in suicide attempters and in healthy volunteers. We also assessed the relationship between the testosterone/cortisol ratio, aggressiveness and impulsivity in suicide attempters. 28 medication-free suicide attempters and 19 healthy volunteers participated in the study. CSF and plasma testosterone sulfate and cortisol levels were assessed with specific radio-immunoassays. The Karolinska Scales of Personality was used to assess impulsivity and aggressiveness. All patients were followed up for cause of death. The mean follow-up period was 21 years. Male suicide attempters had higher CSF and plasma testosterone levels than age- matched male healthy volunteers. There were no significant differences in CSF testosterone levels in female suicide attempters and healthy female volunteers. Testosterone levels did not differ significantly in suicide victims compared to survivors. In male suicide attempters, the CSF testosterone/cortisol ratio showed a significant positive correlation with both impulsivity and aggressiveness. Higher CSF testosterone levels may be associated with attempted suicide in young men through association with both aggressiveness and impulsivity, a key endophenotype in young male suicide attempters. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Skills lab training in veterinary medicine. Effective preparation for clinical work at the small animal clinic of the University for Veterinary Medicine Hannover, Foundation].

Science.gov (United States)

Engelskirchen, Simon; Ehlers, Jan; Kirk, Ansgar T; Tipold, Andrea; Dilly, Marc

2017-09-20

During five and a half years of studying veterinary medicine, students should in addition to theoretical knowledge acquire sufficient practical skills. Considering animal welfare and ethical aspects, opportunities for hands-on learning on living animals are limited because of the high annual number of students. The first German veterinary clinical-skills lab, established in 2013 at the University for Veterinary Medicine Hannover, Foundation (TiHo), offers opportunities for all students to learn, train and repeat clinical skills on simulators and models as frequently as they would like, until they feel sufficiently confident to transfer these skills to living animals. This study describes the establishment of clinical-skills lab training within the students' practical education, using the example of the small-animal clinic of the TiHo. Two groups of students were compared: without skills lab training (control group K) and with skills lab training (intervention group I). At the end of both the training and a subsequent 10-week clinical rotation in different sections of the clinic, an objective structured clinical examination (OSCE) was performed, testing the students' practical skills at 15 stations. An additional multiple-choice test was performed before and after the clinical rotation to evaluate the increased theoretical knowledge. Students of group I achieved significantly (p ≤ 0.05) better results in eight of the 15 tested skills. The multiple-choice test revealed a significant (p ≤ 0.05) gain of theoretical knowledge in both groups without any differences between the groups. Students displayed a high degree of acceptance of the skills lab training. Using simulators and models in veterinary education is an efficient teaching concept, and should be used continually and integrated in the curriculum.

Successes and Challenges in Transitioning to Large Enrollment NEXUS/Physics IPLS Labs

Science.gov (United States)

Moore, Kimberly

2017-01-01

UMd-PERG's NEXUS/Physics for Life Sciences laboratory curriculum, piloted in 2012-2013 in small test classes, has been implemented in large-enrollment environments at UMD from 2013-present. These labs address physical issues at biological scales using microscopy, image and video analysis, electrophoresis, and spectroscopy in an open, non-protocol-driven environment. We have collected a wealth of data (surveys, video analysis, etc.) that enables us to get a sense of the students' responses to this curriculum in a large-enrollment environment and with teaching assistants both `new to' and `experienced in' the labs. In this talk, we will provide a brief overview of what we have learned, including the challenges of transitioning to large N, student perception then and now, and comparisons of our large-enrollment results to the results from our pilot study. We will close with a discussion of the acculturation of teaching assistants to this novel environment and suggestions for sustainability.

Post-Admission Cognitive Therapy: A Brief Intervention for Psychiatric Inpatients Admitted After a Suicide Attempt

Science.gov (United States)

Ghahramanlou-Holloway, Marjan; Cox, Daniel W.; Greene, Farrah N.

2012-01-01

To date, no empirically based inpatient intervention for individuals who have attempted suicide exists. We present an overview of a novel psychotherapeutic approach, Post-Admission Cognitive Therapy (PACT), currently under development and empirical testing for inpatients who have been admitted for a recent suicide attempt. PACT is adapted from an…

PTH Test

Science.gov (United States)

... Gregory C. Sephel PhD FACB MT(ASCP). Lab Tests Online adjunct board member. Director Clinical Pathology, VA TN Valley Healthcare System; Associate Professor Pathology, Microbiology, Immunology, Vanderbilt University School of Medicine. Sources Used ...

Characteristics of individuals who make impulsive suicide attempts.

Science.gov (United States)

Spokas, Megan; Wenzel, Amy; Brown, Gregory K; Beck, Aaron T

2012-02-01

Previous research has identified only a few variables that have been associated with making an impulsive suicide attempt. The aim of the current study was to compare individuals who made an impulsive suicide attempt with those who made a premeditated attempt on both previously examined and novel characteristics. Participants were classified as making an impulsive or premeditated attempt based on the Suicide Intent Scale (Beck et al., 1974a) and were compared on a number of characteristics relevant to suicidality, psychiatric history, and demographics. Individuals who made an impulsive attempt expected that their attempts would be less lethal; yet the actual lethality of both groups' attempts was similar. Those who made an impulsive attempt were less depressed and hopeless than those who made a premeditated attempt. Participants who made an impulsive attempt were less likely to report a history of childhood sexual abuse and more likely to be diagnosed with an alcohol use disorder than those who made a premeditated attempt. Although the sample size was adequate for bivariate statistics, future studies using larger sample sizes will allow for multivariate analyses of characteristics that differentiate individuals who make impulsive and premeditated attempts. Clinicians should not minimize the significance of impulsive attempts, as they are associated with a similar level of lethality as premeditated attempts. Focusing mainly on depression and hopelessness as indicators of suicide risk has the potential to under-identify those who are at risk for making impulsive attempts. Copyright © 2011 Elsevier B.V. All rights reserved.

Learning Experience on Transformer Using HOT Lab for Pre-service Physics Teacher’s

Science.gov (United States)

Malik, A.; Setiawan, A.; Suhandi, A.; Permanasari, A.

2017-09-01

This study aimed at investigating pre-service teacher’s critical thinking skills improvement through Higher Order Thinking (HOT) Lab on transformer learning. This research used mix method with the embedded experimental model. Research subjects are 60 students of Physics Education in UIN Sunan Gunung Djati Bandung. The results showed that based on the results of the analysis of practical reports and observation sheet shows students in the experimental group was better in carrying out the practicum and can solve the real problem while the control group was going on the opposite. The critical thinking skills of students applying the HOT Lab were higher than the verification lab. Critical thinking skills could increase due to HOT Lab based problems solving that can develop higher order thinking skills through laboratory activities. Therefore, it was concluded that the application of HOT Lab was more effective than verification lab on improving students’ thinking skills on transformer topic learning. Finally, HOT Lab can be implemented in other subject learning and could be used to improve another higher order thinking skills.

Trait impulsivity in suicide attempters: preliminary study.

Science.gov (United States)

Doihara, Chiho; Kawanishi, Chiaki; Ohyama, Nene; Yamada, Tomoki; Nakagawa, Makiko; Iwamoto, Yohko; Odawara, Toshinari; Hirayasu, Yoshio

2012-10-01

Suicide attempt is a risk factor for suicide. To investigate trait impulsivity among suicide attempters, 93 attempters admitted to an emergency department and 113 healthy controls were evaluated using the Japanese version of the Barratt Impulsiveness Scale (BIS-11J). Impulsivity was analyzed in relation to clinical data in the attempters. Total BIS-11J, attention impulsiveness, and motor impulsiveness scores were significantly higher in the attempters than in the controls. Both total BIS-11J and non-planning impulsiveness scores were significantly higher in attempters with schizophrenia and other psychotic disorders among the diagnostic groups. Control of impulsivity should be considered as one of the targets for suicide prevention. © 2012 The Authors. Psychiatry and Clinical Neurosciences © 2012 Japanese Society of Psychiatry and Neurology.

Use of tablets for instruction and learning in microbiology labs

DEFF Research Database (Denmark)

Møller, Karen Louise; Jelsbak, Vibe Alopaeus; Georgsen, Marianne

of this project are to develop a technological infrastructure to support students’ work in the lab and to develop teaching and learning resources. Our research question is: How is teaching and learning in the laboratory influenced by the tablets and the following multimodal teaching and learning materials...... and taken notes by hand. Use of tablets in the lab offers new opportunities. In September 2012, nine tablets were introduced into one of the labs of the college. Groups of students use the tablets to access documents, watch video instructions, and to document results and procedures digitally. The objectives......? The empirical part of the project has been documented through field observations in the lab (in writing and with photos). We have found the following to be characteristic of the work of the students: the students use the tablets collaboratively, take more photos than requested, use the video based instructions...

A Big Bang Lab

Science.gov (United States)

Scheider, Walter

2005-01-01

The February 2005 issue of The Science Teacher (TST) reminded everyone that by learning how scientists study stars, students gain an understanding of how science measures things that can not be set up in lab, either because they are too big, too far away, or happened in a very distant past. The authors of "How Far are the Stars?" show how the…

Classification of attempted suicide by cluster analysis: A study of 888 suicide attempters presenting to the emergency department.

Science.gov (United States)

Kim, Hyeyoung; Kim, Bora; Kim, Se Hyun; Park, C Hyung Keun; Kim, Eun Young; Ahn, Yong Min

2018-08-01

It is essential to understand the latent structure of the population of suicide attempters for effective suicide prevention. The aim of this study was to identify subgroups among Korean suicide attempters in terms of the details of the suicide attempt. A total of 888 people who attempted suicide and were subsequently treated in the emergency rooms of 17 medical centers between May and November of 2013 were included in the analysis. The variables assessed included demographic characteristics, clinical information, and details of the suicide attempt assessed by the Suicide Intent Scale (SIS) and Columbia-Suicide Severity Rating Scale (C-SSRS). Cluster analysis was performed using the Ward method. Of the participants, 85.4% (n = 758) fell into a cluster characterized by less planning, low lethality methods, and ambivalence towards death ("impulsive"). The other cluster (n = 130) involved a more severe and well-planned attempt, used highly lethal methods, and took more precautions to avoid being interrupted ("planned"). The first cluster was dominated by women, while the second cluster was associated more with men, older age, and physical illness. We only included participants who visited the emergency department after their suicide attempt and had no missing values for SIS or C-SSRS. Cluster analysis extracted two distinct subgroups of Korean suicide attempters showing different patterns of suicidal behaviors. Understanding that a significant portion of suicide attempts occur impulsively calls for new prevention strategies tailored to differing subgroup profiles. Copyright © 2018 Elsevier B.V. All rights reserved.

Pending laboratory tests and the hospital discharge summary in patients discharged to sub-acute care.

Science.gov (United States)

Walz, Stacy E; Smith, Maureen; Cox, Elizabeth; Sattin, Justin; Kind, Amy J H

2011-04-01

Previous studies have noted a high (41%) prevalence and poor discharge summary communication of pending laboratory (lab) tests at the time of hospital discharge for general medical patients. However, the prevalence and communication of pending labs within a high-risk population, specifically those patients discharged to sub-acute care (i.e., skilled nursing, rehabilitation, long-term care), remains unknown. To determine the prevalence and nature of lab tests pending at hospital discharge and their inclusion within hospital discharge summaries, for common sub-acute care populations. Retrospective cohort study. Stroke, hip fracture, and cancer patients discharged from a single large academic medical center to sub-acute care, 2003-2005 (N = 564) Pending lab tests were abstracted from the laboratory information system (LIS) and from each patient's discharge summary, then grouped into 14 categories and compared. Microbiology tests were sub-divided by culture type and number of days pending prior to discharge. Of sub-acute care patients, 32% (181/564) were discharged with pending lab tests per the LIS; however, only 11% (20/181) of discharge summaries documented these. Patients most often left the hospital with pending microbiology tests (83% [150/181]), particularly blood and urine cultures, and reference lab tests (17% [30/181]). However, 82% (61/74) of patients' pending urine cultures did not have 24-hour preliminary results, and 19% (13/70) of patients' pending blood cultures did not have 48-hour preliminary results available at the time of hospital discharge. Approximately one-third of the sub-acute care patients in this study had labs pending at discharge, but few were documented within hospital discharge summaries. Even after considering the availability of preliminary microbiology results, these omissions remain common. Future studies should focus on improving the communication of pending lab tests at discharge and evaluating the impact that this improved

Metallurgical Laboratory and Components Testing

Data.gov (United States)

Federal Laboratory Consortium — In the field of metallurgy, TTC is equipped to run laboratory tests on track and rolling stock components and materials. The testing lab contains scanning-electron,...

Human Engineering Modeling and Performance Lab Study Project

Science.gov (United States)

Oliva-Buisson, Yvette J.

2014-01-01

The HEMAP (Human Engineering Modeling and Performance) Lab is a joint effort between the Industrial and Human Engineering group and the KAVE (Kennedy Advanced Visualiations Environment) group. The lab consists of sixteen camera system that is used to capture human motions and operational tasks, through te use of a Velcro suit equipped with sensors, and then simulate these tasks in an ergonomic software package know as Jac, The Jack software is able to identify the potential risk hazards.

Promoting Metacognition in Introductory Calculus-based Physics Labs

Science.gov (United States)

Grennell, Drew; Boudreaux, Andrew

2010-10-01

In the Western Washington University physics department, a project is underway to develop research-based laboratory curriculum for the introductory calculus-based course. Instructional goals not only include supporting students' conceptual understanding and reasoning ability, but also providing students with opportunities to engage in metacognition. For the latter, our approach has been to scaffold reflective thinking with guided questions. Specific instructional strategies include analysis of alternate reasoning presented in fictitious dialogues and comparison of students' initial ideas with their lab group's final, consensus understanding. Assessment of student metacognition includes pre- and post- course data from selected questions on the CLASS survey, analysis of written lab worksheets, and student opinion surveys. CLASS results are similar to a traditional physics course and analysis of lab sheets show that students struggle to engage in a metacognitive process. Future directions include video studies, as well as use of additional written assessments adapted from educational psychology.

RSV Test

Science.gov (United States)

... Sex Hormone Binding Globulin (SHBG) Shiga toxin-producing Escherichia coli Sickle Cell Tests Sirolimus Smooth Muscle Antibody (SMA) ... University Medical Center, LAB Letter [On-line newsletter]. PDF available for download at http://www.stanfordhospital.com/ ...

Gender differences in characteristics of suicide attempts

Directory of Open Access Journals (Sweden)

Ljušić Dragana

2014-01-01

Full Text Available Suicide attempt denotes activities directed towards one's own death which do not end in death. The ratio between attempted and realized suicides is expressed by the index called hazard ratio. Risk factors which contribute to suicidal behavior are: various emotional conditions, personality traits, stressful life events, substance misuse etc. The purpose of the study was to explore the frequencies and epidemiological and demographic characteristics of suicide attempts separately in men and women. The study sample involved 56 patients with the diagnosis suicide attempt (Tentamen suicidii treated on the Psychiatric department of the Clinical Center Priština, Gračanica. The data have been analyzed in respect to gender, age, profession/employment, mental disorder diagnosis, motivation (reason and the way of performing a suicide attempt. Results: suicide has been attempted by 42 women (75% and 14 men (25% of the sample. The prevalent age group of our sample (26.8% represents the patients below 20. The most prevalent are also unemployed patients, 33.3% of women and 50% of men. The most prevalent diagnosis is anxiety disorder (61.9% of women and 57.1% of men. The prevailing reason for attempting suicide in women was couple conflict (54.8% and existential problems in men (50%. Fifty one patients of the sample (91.1% have attempted suicide by intoxication with sedative drugs (anxiolytics. The majority of suicide attempts happened during afternoon and evening hours, i.e. in the period 12-24h. Conclusion: women have attempted suicide more frequently than men (ratio 3:1. Unemployment has been the prevailing professional characteristic in both genders. The most prevailing diagnosis is anxiety disorder. The chief motive in women is couple conflict and in men existential difficulties. In both genders the most frequent way of attempting suicide is poisoning, mostly in the period 12-24h.

MATLAB-Like Scripting of Java Scientific Libraries in ScalaLab

Directory of Open Access Journals (Sweden)

Stergios Papadimitriou

2014-01-01

Full Text Available Although there are a lot of robust and effective scientific libraries in Java, the utilization of these libraries in pure Java is difficult and cumbersome, especially for the average scientist that does not expertise in software development. We illustrate that ScalaLab presents an easier and productive MATLAB like front end. Also, the main strengths and weaknesses of the core Java libraries of ScalaLab are elaborated. Since performance is of paramount importance for scientific computation, the article discusses extensively performance aspects of the ScalaLab environment. Also, Java bytecode performance is compared to native code.

Arduino-Based embedded systems interfacing, simulation, and LabVIEW GUI

CERN Document Server

Singh, Rajesh; Singh, Bhupendra; Choudhury, Sushabhan

2018-01-01

Arduino is an open-source electronics platform based on easy-to-use hardware and software while LabVIEW is a graphical programming telling how to connect functions and work with a variety of datatypes when constructing applications.This book will help beginners to get started with Arduino-based embedded systems including essential know-how of the programming and interfacing of the devices. Book includes programming and simulation of Arduino-based projects and interfacing with LabVIEW, based on practical case studies. The book comprises of total twenty five chapters with description, working model of LabVIEW and programming with Arduino IDE.

Repeated suicide attempts and suicide among individuals with a first emergency department contact for attempted suicide

DEFF Research Database (Denmark)

Fedyszyn, Izabela E.; Erlangsen, Annette; Hjorthoj, Carsten

2016-01-01

Objective: Emergency departments are important, albeit underutilized, sites for suicide prevention. Preventive strategies and interventions could benefit from a greater understanding of factors influencing the course of suicide risk after emergency department contact due to attempted suicide...... = 1.74; 95% CI, 1.22-2.49). The cumulative rates of repeated attempts and suicide deaths in the total sample were particularly high within the first week of the index attempt, reaching 3.6% and 0.1%, respectively. Conclusions: Preventive efforts need to target the period close to discharge from....... The aim of our study was 2-fold: to identify predictors of repeated suicide attempts and suicide and to investigate the timing of these events. Methods: Data from Danish nationwide, longitudinal registers were used in this prospective, population-based study of all individuals first presenting...

Airborne Low-Frequency Sonar (ALFS) Lab

Data.gov (United States)

Federal Laboratory Consortium — The ALFS lab is dedicated to support acoustic data analysis and processing software support to the AN/AQS-22 dipping sonar system. It includes stand-alone Software...

Generator Inspection Report: Bio - Lab, Inc.

Science.gov (United States)

Contains report from Georgia Department of Natural Resources of July 21, 1999 inspection of the Bio - Lab Incorporated Plant 4 in Conyers, Rockdale County, Georgia, reporting that no violations were observed.

ATC-lab(Advanced): an air traffic control simulator with realism and control.

Science.gov (United States)

Fothergill, Selina; Loft, Shayne; Neal, Andrew

2009-02-01

ATC-lab(Advanced) is a new, publicly available air traffic control (ATC) simulation package that provides both realism and experimental control. ATC-lab(Advanced) simulations are realistic to the extent that the display features (including aircraft performance) and the manner in which participants interact with the system are similar to those used in an operational environment. Experimental control allows researchers to standardize air traffic scenarios, control levels of realism, and isolate specific ATC tasks. Importantly, ATC-lab(Advanced) also provides the programming control required to cost effectively adapt simulations to serve different research purposes without the need for technical support. In addition, ATC-lab(Advanced) includes a package for training participants and mathematical spreadsheets for designing air traffic events. Preliminary studies have demonstrated that ATC-lab(Advanced) is a flexible tool for applied and basic research.

Decision-making competence and attempted suicide.

Science.gov (United States)

Szanto, Katalin; Bruine de Bruin, Wändi; Parker, Andrew M; Hallquist, Michael N; Vanyukov, Polina M; Dombrovski, Alexandre Y

2015-12-01

The propensity of people vulnerable to suicide to make poor life decisions is increasingly well documented. Do they display an extreme degree of decision biases? The present study used a behavioral-decision approach to examine the susceptibility of low-lethality and high-lethality suicide attempters to common decision biases that may ultimately obscure alternative solutions and deterrents to suicide in a crisis. We assessed older and middle-aged (42-97 years) individuals who made high-lethality (medically serious) (n = 31) and low-lethality suicide attempts (n = 29). Comparison groups included suicide ideators (n = 30), nonsuicidal depressed participants (n = 53), and psychiatrically healthy participants (n = 28). Attempters, ideators, and nonsuicidal depressed participants had nonpsychotic major depression (DSM-IV criteria). Decision biases included sunk cost (inability to abort an action for which costs are irrecoverable), framing (responding to superficial features of how a problem is presented), underconfidence/overconfidence (appropriateness of confidence in knowledge), and inconsistent risk perception. Data were collected between June 2010 and February 2014. Both high- and low-lethality attempters were more susceptible to framing effects as compared to the other groups included in this study (P ≤ .05, ηp2 = 0.06). In contrast, low-lethality attempters were more susceptible to sunk costs than both the comparison groups and high-lethality attempters (P ≤ .01, ηp2 = 0.09). These group differences remained after accounting for age, global cognitive performance, and impulsive traits. Premorbid IQ partially explained group differences in framing effects. Suicide attempters' failure to resist framing may reflect their inability to consider a decision from an objective standpoint in a crisis. Failure of low-lethality attempters to resist sunk cost may reflect their tendency to confuse past and future costs of their behavior, lowering their threshold for acting

"Impulsive" suicide attempts: What do we really mean?

Science.gov (United States)

May, Alexis M; Klonsky, E David

2016-07-01

Suicide attempts are often regarded as impulsive acts. However, there is little consensus regarding the definition or clinical characteristics of an "impulsive" attempt. To clarify this issue, we examined 3 indicators of the impulsivity of an attempt: (a) preparation, (b) time contemplating the attempt, and (c) self-report that impulsivity motivated the attempt. We examined relationships among the indicators and their relationship to trait impulsivity and characteristics of the suicide attempt. Adult participants (N = 205) with a history of suicide attempts were administered validated interviews and questionnaires. In general, the 3 attempt impulsivity indicators correlated only moderately with each other and not at all with trait impulsivity or with important characteristics of the attempt (e.g., lethality, preattempt communication, motivations). However, there were 2 exceptions. First, intent to die was inversely related to the 3 attempt impulsivity indicators (rs ranged from -.17 to .45) such that more impulsive attempts were associated with lower intent. Second, self-report that the attempt was motivated by impulsivity was related to 3 facets of trait impulsivity (rs ranged from .16 to .41). These findings suggest that individuals endorsing trait impulsivity are likely to describe their attempts as motivated by impulsivity, regardless of the presence of preparation or prolonged contemplation. Overall, study results suggest that the common conception of a unidimensional impulsive attempt may be inaccurate and that the emphasis on general impulsivity in prevention guidelines should be tempered. Implications for suicide risk assessment and prevention are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

The investigation of factors related to suicide attempts in Southeastern Turkey

Directory of Open Access Journals (Sweden)

Okan Ibiloglu A

2016-02-01

Full Text Available Aslihan Okan Ibiloglu, Abdullah Atli, Suleyman Demir, Mehmet Gunes, Mehmet Cemal Kaya, Mahmut Bulut, Aytekin Sir Department of Psychiatry, Faculty of Medicine, Dicle University, Diyarbakir, Turkey Background: Suicide is an important health problem in Turkey as it is in all regions of the world. Suicidal behavior has multiple causes, which are broadly divided into those related to proximal stressors and those due to predisposition. Suicide statistics may be associated with mental health disorders, which are among the foremost predictors of suicide attempts. More than 90% of patients who commit suicide have a diagnosable psychiatric disorder, usually a major depressive disorder. Other major risk factors for suicide attempts are history of suicide attempts in the family, stressful life events, sleep disturbances, poor income, unemployment, severity of symptoms of depression, and anxiety. Sleep is a complex phenomenon. Sleep disturbances can therefore be contributed to the emergence of suicidal behavior allowing for the possibility of predicting future suicides. Methods: We evaluated 106 patients who were admitted after suicide attempts to the Department of Psychiatry at Dicle University Faculty of Medicine. The recruited subjects were assessed by Structured Clinical Interview for DSM-IV Axis I disorders, and the intensity of symptoms was evaluated using the Beck Anxiety Inventory, Hamilton Depression Rating Scale, and Pittsburgh Sleep Quality Index. The mean values of the subjects attempting multiple and single suicides were compared using appropriate inferential statistical tests. Results: Most suicide attempts are believed to be preventable. Our results revealed that a great variety of risk factors are associated with an increased risk for multiple suicide attempts. Most of these attempts appeared to be spontaneous and impulsive rather than planned. In particular, this study highlights the importance of previous suicide attempts, history of

A study of energy-size relationship and wear rate in a lab-scale high pressure grinding rolls unit

Science.gov (United States)

Rashidi Dashtbayaz, Samira

This study is focused on two independent topics of energy-size relationship and wear-rate measurements on a lab-scale high pressure grinding rolls (HPGR). The first part of this study has been aimed to investigate the influence of the operating parameters and the feed characteristics on the particle-bed breakage using four different ore samples in a 200 mm x 100 mm lab-scale HPGR. Additionally, multistage grinding, scale-up from a lab-scale HPGR, and prediction of the particle size distributions have been studied in detail. The results obtained from energy-size relationship studies help with better understanding of the factors contributing to more energy-efficient grinding. It will be shown that the energy efficiency of the two configurations of locked-cycle and open multipass is completely dependent on the ore properties. A test procedure to produce the scale-up data is presented. The comparison of the scale-up factors between the data obtained on the University of Utah lab-scale HPGR and the industrial machine at the Newmont Boddington plant confirmed the applicability of lab-scale machines for trade-off studies. The population balance model for the simulation of product size distributions has shown to work well with the breakage function estimated through tests performed on the HPGR at high rotational speed. Selection function has been estimated by back calculation of population balance model with the help of the experimental data. This is considered to be a major step towards advancing current research on the simulation of particle size distribution by using the HPGR machine for determining the breakage function. Developing a technique/setup to measure the wear rate of the HPGR rolls' surface is the objective of the second topic of this dissertation. A mockup was initially designed to assess the application of the linear displacement sensors for measuring the rolls' weight loss. Upon the analysis of that technique and considering the corresponding sources of

The Design of NetSecLab: A Small Competition-Based Network Security Lab

Science.gov (United States)

Lee, C. P.; Uluagac, A. S.; Fairbanks, K. D.; Copeland, J. A.

2011-01-01

This paper describes a competition-style of exercise to teach system and network security and to reinforce themes taught in class. The exercise, called NetSecLab, is conducted on a closed network with student-formed teams, each with their own Linux system to defend and from which to launch attacks. Students are expected to learn how to: 1) install…

Attracting STEM talent: do STEM students prefer traditional or work/life-interaction labs?

Science.gov (United States)

DeFraine, William C; Williams, Wendy M; Ceci, Stephen J

2014-01-01

The demand for employees trained in science, technology, engineering, and mathematics (STEM) fields continues to increase, yet the number of Millennial students pursuing STEM is not keeping pace. We evaluated whether this shortfall is associated with Millennials' preference for flexibility and work/life-interaction in their careers-a preference that may be inconsistent with the traditional idea of a science career endorsed by many lab directors. Two contrasting approaches to running STEM labs and training students were explored, and we created a lab recruitment video depicting each. The work-focused video emphasized the traditional notions of a science lab, characterized by long work hours and a focus on individual achievement and conducting research above all else. In contrast, the work/life-interaction-focused video emphasized a more progressive view - lack of demarcation between work and non-work lives, flexible hours, and group achievement. In Study 1, 40 professors rated the videos, and the results confirmed that the two lab types reflected meaningful real-world differences in training approaches. In Study 2, we recruited 53 current and prospective graduate students in STEM fields who displayed high math-identification and a commitment to science careers. In a between-subjects design, they watched one of the two lab-recruitment videos, and then reported their anticipated sense of belonging to and desire to participate in the lab depicted in the video. Very large effects were observed on both primary measures: Participants who watched the work/life-interaction-focused video reported a greater sense of belonging to (d = 1.49) and desire to participate in (d = 1.33) the lab, relative to participants who watched the work-focused video. These results suggest Millennials possess a strong desire for work/life-interaction, which runs counter to the traditional lab-training model endorsed by many lab directors. We discuss implications of these findings for STEM

Performance Testing of Jefferson Lab 12 GeV Helium Screw Compressors

Science.gov (United States)

Knudsen, P.; Ganni, V.; Dixon, K.; Norton, R.; Creel, J.

2015-08-01

Oil injected screw compressors have essentially superseded all other types of compressors in modern helium refrigeration systems due to their large displacement capacity, reliability, minimal vibration, and capability of handling helium's high heat of compression. At the present state of compressor system designs for helium refrigeration systems, typically two-thirds of the lost input power is due to the compression system. It is important to understand the isothermal and volumetric efficiencies of these machines to help properly design the compression system to match the refrigeration process. It is also important to identify those primary compressor skid exergetic loss mechanisms which may be reduced, thereby offering the possibility of significantly reducing the input power to helium refrigeration processes which are extremely energy intensive. This paper summarizes the results collected during the commissioning of the new compressor system for Jefferson Lab's (JLab's) 12 GeV upgrade. The compressor skid packages were designed by JLab and built to print by industry. They incorporate a number of modifications not typical of helium screw compressor packages and most importantly allow a very wide range of operation so that JLab's patented Floating Pressure Process can be fully utilized. This paper also summarizes key features of the skid design that allow this process and facilitate the maintenance and reliability of these helium compressor systems.

Potassium Blood Test

Science.gov (United States)

... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Potassium, Serum; 426–27 p. Lab ...

Sociodemographic profile, clinical factors, and mode of attempt in suicide attempters in consultation liaison psychiatry in a tertiary care center

Directory of Open Access Journals (Sweden)

Santosh Ramdurg

2011-01-01

Full Text Available Background: The objective was to study the sociodemographic data, psychiatric disorder, precipitating events, and mode of attempt in suicide attempted patients referred to consultation liaison psychiatric services. Settings and Design: A prospective study of 6-month duration was done in a tertiary care center in India. Materials and Methods: During the 6-month period all referrals were screened for the presence of suicide attempters in consultation liaison services. Those who fulfilled the criteria for suicide attempters were evaluated by using semistructured pro forma containing sociodemographic data, precipitating events, mode of attempt, and psychiatric diagnosis by using ICD-10. Results: The male-to-female ratio was similar. Adult age, urban background, employed, matriculation educated were more represented in this study. More than 80% of all attempters had psychiatric disorder. Majority had a precipitating event prior to suicide attempt. The most common method of attempt was by use of corrosive. Conclusions: Majority of suicide attempter patients had mental illness. Early identification and treatment of these disorders would have prevented morbidity and mortality associated with this. There is a need of proper education of relatives about keeping corrosive and other poisonous material away from patients as it was being commonest mode of attempt.

Clinical Correlates of Planned and Unplanned Suicide Attempts.

Science.gov (United States)

Chaudhury, Sadia R; Singh, Tanya; Burke, Ainsley; Stanley, Barbara; Mann, J John; Grunebaum, Michael; Sublette, M Elizabeth; Oquendo, Maria A

2016-11-01

Suicide attempters differ in the degree of planning for their suicide attempts. The purpose of this study was to identify differences between individuals who make planned (≥3 hours of planning) and unplanned (suicide attempts. Depressed suicide attempters (n = 110) were compared based on degree of planning of their most recent suicide attempt on demographic and clinical variables. Participants who made planned suicide attempts were more likely to have family history of completed suicide, more severe and frequent suicidal ideation, greater trait impulsivity, and greater suicidal intent and more severe medical consequences for both their most recent and most serious suicide attempts. These results suggest clear clinical differences based on the degree of suicide attempt planning. Severe suicidal ideation, high suicide intent, family history of suicide completion, and high levels of motor impulsivity contribute to a phenotype that is at greater risk of planned, highly lethal suicide attempts.

A Content Analysis of Online Suicide Notes: Attempted Suicide Versus Attempt Resulting in Suicide.

Science.gov (United States)

Synnott, John; Ioannou, Maria; Coyne, Angela; Hemingway, Siobhan

2017-09-28

Fifty suicide notes of those who died by suicide and 50 suicide notes of those who survived their suicide attempt were analyzed using Smallest Space Analysis. The core of all suicide notes was discovered to be constructed with the use of four variables: saying goodbye to their audience, feelings of loneliness, method used to attempt suicide, and negative self-image. Furthermore, three different suicide note themes of those who died and three suicide note themes from those who survived were also identified. The analysis revealed that suicide note writers who died by their attempt were more likely to combine a dislike of themselves and a concern for loved ones. The implications of the work in terms of suicide prevention are discussed. © 2017 The American Association of Suicidology.

A Series of Computational Neuroscience Labs Increases Comfort with MATLAB.

Science.gov (United States)

Nichols, David F

2015-01-01

Computational simulations allow for a low-cost, reliable means to demonstrate complex and often times inaccessible concepts to undergraduates. However, students without prior computer programming training may find working with code-based simulations to be intimidating and distracting. A series of computational neuroscience labs involving the Hodgkin-Huxley equations, an Integrate-and-Fire model, and a Hopfield Memory network were used in an undergraduate neuroscience laboratory component of an introductory level course. Using short focused surveys before and after each lab, student comfort levels were shown to increase drastically from a majority of students being uncomfortable or with neutral feelings about working in the MATLAB environment to a vast majority of students being comfortable working in the environment. Though change was reported within each lab, a series of labs was necessary in order to establish a lasting high level of comfort. Comfort working with code is important as a first step in acquiring computational skills that are required to address many questions within neuroscience.

City Labs as Vehicles for Innovation in Urban Planning Processes

Directory of Open Access Journals (Sweden)

Christian Scholl

2016-12-01

Full Text Available This paper assesses the role of urban experiments for local planning processes through a case-based analysis of the city lab of Maastricht. In conjunction with this, the article offers three contributions, as additional elements. Firstly, the paper develops a set of defining characteristics of city labs as an analytical concept which is relevant for discussions about (collaborative planning. Secondly, it refines the literature on collaborative planning by drawing attention to experimentation and innovation. Thirdly, the paper assesses the potential of city labs to contribute to the innovation of urban governance. The work draws from the literature on experimentation and learning as well as the literature on collaborative urban planning. In the conclusions, we discuss the potential of city labs as vehicles for learning about new urban planning approaches and their limitations as spaces for small-scale experimentation. The paper is based on research for the URB@Exp research project funded by JPI Urban Europe.

Attempting to train a digital human model to reproduce human subject reach capabilities in an ejection seat aircraft

NARCIS (Netherlands)

Zehner, G.F.; Hudson, J.A.; Oudenhuijzen, A.

2006-01-01

From 1997 through 2002, the Air Force Research Lab and TNO Defence, Security and Safety (Business Unit Human Factors) were involved in a series of tests to quantify the accuracy of five Human Modeling Systems (HMSs) in determining accommodation limits of ejection seat aircraft. The results of these

Heat transfer virtual lab for students and engineers theory and guide for setting up

CERN Document Server

Fridman, Ella

2014-01-01

Laboratory experiments are a vital part of engineering education,which historically were considered impractical for distance learning.This book presents a guide for the practical employment of a heattransfer virtual lab for students and engineers.Inside, the authors have detailed this virtual lab which is designedand can implement a real-time, robust, and scalable software systemthat provides easy access to lab equipment anytime and anywhereover the Internet. They introduce and explain LabVIEW ineasy-to-understand language. LabVIEW is a proprietary softwaretool by National Instruments, and can

Lab notebooks as scientific communication: Investigating development from undergraduate courses to graduate research

Directory of Open Access Journals (Sweden)

Jacob T. Stanley

2016-09-01

Full Text Available In experimental physics, lab notebooks play an essential role in the research process. For all of the ubiquity of lab notebooks, little formal attention has been paid to addressing what is considered “best practice” for scientific documentation and how researchers come to learn these practices in experimental physics. Using interviews with practicing researchers, namely, physics graduate students, we explore the different experiences researchers had in learning how to effectively use a notebook for scientific documentation. We find that very few of those interviewed thought that their undergraduate lab classes successfully taught them the benefit of maintaining a lab notebook. Most described training in lab notebook use as either ineffective or outright missing from their undergraduate lab course experience. Furthermore, a large majority of those interviewed explained that they did not receive any formal training in maintaining a lab notebook during their graduate school experience and received little to no feedback from their advisors on these records. Many of the interviewees describe learning the purpose of, and how to maintain, these kinds of lab records only after having a period of trial and error, having already started doing research in their graduate program. Despite the central role of scientific documentation in the research enterprise, these physics graduate students did not gain skills in documentation through formal instruction, but rather through informal hands-on practice.

A Virtual PV Systems Lab for Engineering Undergraduate Curriculum

Directory of Open Access Journals (Sweden)

Emre Ozkop

2014-01-01

Full Text Available Design and utilization of a Virtual Photovoltaic Systems Laboratory for undergraduate curriculum are introduced in this paper. The laboratory introduced in this study is developed to teach students the basics and design steps of photovoltaic solar energy systems in a virtual environment before entering the field. The users of the proposed virtual lab will be able to determine the sizing by selecting related parameters of the photovoltaic system to meet DC and AC loading conditions. Besides, the user will be able to analyze the effect of changing solar irradiation and temperature levels on the operating characteristics of the photovoltaic systems. Common DC bus concept and AC loading conditions are also included in the system by utilizing a permanent magnet DC motor and an RLC load as DC and AC loading examples, respectively. The proposed Virtual Photovoltaic Systems Laboratory is developed in Matlab/Simulink GUI environment. The proposed virtual lab has been used in Power Systems Lab in the Department of Electrical and Electronics Engineering at Karadeniz Technical University as a part of undergraduate curriculum. A survey on the students who took the lab has been carried out and responses are included in this paper.

Children at Risk for Suicide Attempt and Attempt-related Injuries: Findings from the 2007 Youth Risk Behavior Survey

Directory of Open Access Journals (Sweden)

West, Bethany A

2010-08-01

Full Text Available Purpose: The current study examines the associations between a range of risk factors and reports of suicide attempts, and attempts requiring medical care in a nationally representative study of high school students. The goal is to examine sex differences in the risk factors that are associated with suicide attempts and attempt-related injuries requiring treatment by a health-care provider. Methods: Data from the 2007 Youth Risk Behavior Survey for students in grades 9-12 were used to assess the prevalence and risk factors for suicidal behavior as well as differences in these for boys and girls. Cross-sectional multivariate logistic regression analyses were computed to determine the most important risk factors for suicide attempts and for suicide attempts requiring medical care for the sample overall and also stratified for boys and for girls. Results: Overall, 6.9% of adolescents attempted suicide (9.3% of girls versus 4.6% of boys. Girls were more likely than boys to report a suicide attempt in the past year (Adj.OR=2.89. Among girls, sadness (Adj.OR=5.74, weapon carrying (Adj.OR=1.48, dating violence (Adj.OR=1.60, forced sex (Adj.OR=1.72, and huffing glue (Adj.OR=2.04 were significantly associated with suicide attempts. Among boys, sadness (Adj.OR=10.96, weapon carrying (Adj.OR=1.66, forced sex (Adj.OR=2.60, huffing glue (OR=1.63, hard drug use (Adj.OR=2.18, and sports involvement (Adj.OR=1.52 were significantly associated with suicide attempts. Conclusions: These findings demonstrate similarities and differences in terms of the modifiable risk factors that increase risk for suicide attempts among boys and girls. In terms of the differences between boys and girls, hard drug use and sports involvement may be important factors for suicide prevention strategies that are directed specifically towards boys, while dating violence victimization may be an important risk factor to address for girls. Overall, these findings can help guide prevention