Mission Planning System Increment 5 (MPS Inc 5)

Science.gov (United States)

2016-03-01

2016 Major Automated Information System Annual Report Mission Planning System Increment 5 (MPS Inc 5) Defense Acquisition Management Information...President’s Budget RDT&E - Research, Development, Test, and Evaluation SAE - Service Acquisition Executive TBD - To Be Determined TY - Then Year...Phone: 845-9625 DSN Fax: Date Assigned: May 19, 2014 Program Information Program Name Mission Planning System Increment 5 (MPS Inc 5) DoD

Validation of the periodicity of growth increment deposition in ...

African Journals Online (AJOL)

Validation of the periodicity of growth increment deposition in otoliths from the larval and early juvenile stages of two cyprinids from the Orange–Vaal river ... Linear regression models were fitted to the known age post-fertilisation and the age estimated using increment counts to test the correspondence between the two for ...

Mejora de los Test de Planificabilidad para Asignación Incremental de Tareas en Sistemas Multiprocesadores de Tiempo Real

Directory of Open Access Journals (Sweden)

Sergio Sáez

2013-04-01

Full Text Available Resumen: Durante la etapa de diseño de un sistema multiprocesador de tiempo real, los test de planificabilidad son una parte clave de los algoritmos de asignación de tareas. El uso de test de planificabilidad exactos permite aumentar la eficiencia de los algoritmos de asignación a costa de un incremento en el tiempo de computo necesario para validar una partición. Aunque existen varios estudios que mejoran el rendimiento de dichos test de planificabilidad, ninguno se ha centrado en el contexto en que dichos test se utilizan. Este trabajo presenta diversas mejoras en los test de planificabilidad exactos basándose en la naturaleza incremental del proceso de asignación. Abstract: During the design of a Real-Time Multiprocessor System, schedulability tests are a key component of the task allocation algorithms. Using exact schedulability tests increases the efficiency of these allocation algorithms, but the execution cost to validate a task partition is also greatly increased. Although several improvement to these schedulability test have been recently published, their use in the multiprocessor context is still unaddressed. This work presents several improvements to execution costs of the schedulability test when they are used by task allocation algorithms taking advantage of the incremental nature of this allocation process. Palabras clave: Sistema Multiprocesadores, Análisis de Planificabilidad, Sistema de Tiempo Real, Keywords: Multiprocessor Systems, Schedulability Analysis, Real-Time Systems

Testing the Relations Between Impulsivity-Related Traits, Suicidality, and Nonsuicidal Self-Injury: A Test of the Incremental Validity of the UPPS Model

Science.gov (United States)

Lynam, Donald R.; Miller, Joshua D.; Miller, Drew J.; Bornovalova, Marina A.; Lejuez, C. W.

2011-01-01

Borderline personality disorder (BPD) has received significant attention as a predictor of suicidal behavior (SB) and nonsuicidal self-injury (NSSI). Despite significant promise, trait impulsivity has received less attention. Understanding the relations between impulsivity and SB and NSSI is confounded, unfortunately, by the heterogeneous nature of impulsivity. This study examined the relations among 4 personality pathways to impulsive behavior studied via the UPPS model of impulsivity and SB and NSSI in a residential sample of drug abusers (N = 76). In this study, we tested whether these 4 impulsivity-related traits (i.e., Negative Urgency, Sensation Seeking, Lack of Premeditation, and Lack of Perseverance) provide incremental validity in the statistical prediction of SB and NSSI above and beyond BPD; they do. We also tested whether BPD symptoms provide incremental validity in the prediction of SB and NSSI above and beyond these impulsivity-related traits; they do not. In addition to the main effects of Lack of Premeditation and Negative Urgency, we found evidence of a robust interaction between these 2 personality traits. The current results argue strongly for the consideration of these 2 impulsivity-related domains—alone and in interaction—when attempting to understand and predict SB and NSSI. PMID:21833346

Assessment of ventilatory thresholds from heart rate variability in five incremental treadmill tests in cross country skiers

OpenAIRE

Mendia Iztueta, Ibai

2014-01-01

Incremental treadmill tests are widely used in the field of exercise physiology for the assessment of Ventilatory Thresholds for clinical and sport oriented issues. The assessment of Ventilatory Thresholds (VTs) from Heart Rate Variability (HRV) is a relatively new approach with increasing popularity because it is a non-invasive and economical method. Nevertheless, this has not been used in Cross Country (XC) Skiing, an endurance sport where the knowledge of VTs holds special importance. The ...

Predicting DMS-IV cluster B personality disorder criteria from MMPI-2 and Rorschach data: a test of incremental validity.

Science.gov (United States)

Blais, M A; Hilsenroth, M J; Castlebury, F; Fowler, J C; Baity, M R

2001-02-01

Despite their frequent conjoint clinical use, the incremental validity of Rorschach (Rorschach, 1921/1942) and MMPI (Hathaway & McKinley, 1943) data has not been adequately established, nor has any study to date explored the incremental validity of these tests for predicting Diagnostic and Statistical Manual of Mental Disorders (4th ed. [DSM-IV]; American Psychiatric Association, 1994) personality disorders (PDs). In a reanalysis of existing data, we used select Rorschach variables and the MMPI PD scales to predict DSM-IV antisocial, borderline, histrionic, and narcissistic PD criteria in a sample of treatment-seeking outpatients. The correlational findings revealed alimited relation between Rorschach and MMPI-2 (Butcher, Dahlstrom, Graham, Tellegen, & Kaemmer, 1989) variables, with only 5 of 30 correlations reaching significance (p psychological characteristics of the DSM-IV Cluster B PDs.

Effects of Increased Respiratory Resistance on Maximal O2 Uptake and Anaerobic Threshold during Incremental Exercise Tests

OpenAIRE

ÖZÇELİK, Oğuz

2014-01-01

This study was undertaken to assess whether maximal O2 uptake (VO2max) can be used as an index of measuring aerobic capacity under the condition of increased respiratory resistance. Seven male subjects performed two incremental exercise tests on a cycle ergometer on different days: one control (C) and one breathing through an 8 mm bore diameter respiratory resistance (R). Ventilatory and gas exchange responses were measured with a turbine volume transducer and mass spectrometry, and processed...

Single point incremental forming: Formability of PC sheets

Science.gov (United States)

Formisano, A.; Boccarusso, L.; Carrino, L.; Lambiase, F.; Minutolo, F. Memola Capece

2018-05-01

Recent research on Single Point Incremental Forming of polymers has slightly covered the possibility of expanding the materials capability window of this flexible forming process beyond metals, by demonstrating the workability of thermoplastic polymers at room temperature. Given the different behaviour of polymers compared to metals, different aspects need to be deepened to better understand the behaviour of these materials when incrementally formed. Thus, the aim of the work is to investigate the formability of incrementally formed polycarbonate thin sheets. To this end, an experimental investigation at room temperature was conducted involving formability tests; varying wall angle cone and pyramid frusta were manufactured by processing polycarbonate sheets with different thicknesses and using tools with different diameters, in order to draw conclusions on the formability of polymer sheets through the evaluation of the forming angles and the observation of the failure mechanisms.

Um metodo para modelagem de exceções em desenvolvimento baseado em componentes

OpenAIRE

Patrick Henrique da Silva Brito

2005-01-01

Resumo: Devido a grande popularização do Desenvolvimento Baseado em Componentes (DBC), ele vem sendo empregado inclusive no desenvolvimento de sistemas computacionais críticos. O emprego do DBC na construção de sistemas confiáveis evidencia a necessidade de se desenvolver componentes de software que sejam robustos e que possuam uma garantia maior do seu funcionamento correto. Tratamento de exceções é uma técnica bastante conhecida para a verificação e tratamento de erros em sistemas de softwa...

Organization Strategy and Structural Differences for Radical Versus Incremental Innovation

OpenAIRE

John E. Ettlie; William P. Bridges; Robert D. O'Keefe

1984-01-01

The purpose of this study was to test a model of the organizational innovation process that suggests that the strategy-structure causal sequence is differentiated by radical versus incremental innovation. That is, unique strategy and structure will be required for radical innovation, especially process adoption, while more traditional strategy and structure arrangements tend to support new product introduction and incremental process adoption. This differentiated theory is strongly supported ...

Validation of a Maximal Incremental Skating Test Performed on a Slide Board: Comparison With Treadmill Skating.

Science.gov (United States)

Piucco, Tatiane; Diefenthaeler, Fernando; Soares, Rogério; Murias, Juan M; Millet, Guillaume Y

2017-11-01

To investigate the criterion validity of a maximal incremental skating test performed on a slide board (SB). Twelve subelite speed skaters performed a maximal skating test on a treadmill and on a SB. Gas exchange threshold (GET), respiratory compensation point (RCP), and maximal variables were determined. Oxygen uptake ([Formula: see text]) (31.0 ± 3.2 and 31.4 ± 4.1 mL·min -1 ·kg -1 ), percentage of maximal [Formula: see text] ([Formula: see text]) (66.3 ± 4 and 67.7 ± 7.1%), HR (153 ± 14 and 150 ±12 bpm), and ventilation (59.8 ± 11.8 and 57.0 ± 10.7 L·min -1 ) at GET, and [Formula: see text] (42.5 ± 4.4 and 42.9 ± 4.8 mL·min -1 ·kg -1 ), percentage of [Formula: see text] (91.1 ± 3.3 and 92.4 ± 2.1%), heart rate (HR) (178 ± 9 and 178 ± 6 bpm), and ventilation (96.5 ± 19.2 and 92.1 ± 12.7 L·min -1 ) at RCP were not different between skating on a treadmill and on a SB. [Formula: see text] (46.7 ± 4.4 vs 46.4 ±6.1 mL·min -1 ·kg -1 ) and maximal HR (195 ± 6 vs 196 ± 10 bpm) were not significantly different and correlated (r = .80 and r = .87, respectively; P  .8) with athletes' best times on 1500 m. The incremental skating test on a SB was capable to distinguish maximal ([Formula: see text] and HR) and submaximal ([Formula: see text], % [Formula: see text], HR, and ventilation) parameters known to determine endurance performance. Therefore, the SB test can be considered as a specific and practical alternative to evaluate speed skaters.

Global Combat Support System - Army Increment 2 (GCSS-A Inc 2)

Science.gov (United States)

2016-03-01

2016 Major Automated Information System Annual Report Global Combat Support System - Army Increment 2 (GCSS-A Inc 2) Defense Acquisition...Secretary of Defense PB - President’s Budget RDT&E - Research, Development, Test, and Evaluation SAE - Service Acquisition Executive TBD - To Be...Date Assigned: Program Information Program Name Global Combat Support System - Army Increment 2 (GCSS-A Inc 2) DoD Component Army Responsible

Deep Incremental Boosting

OpenAIRE

Mosca, Alan; Magoulas, George D

2017-01-01

This paper introduces Deep Incremental Boosting, a new technique derived from AdaBoost, specifically adapted to work with Deep Learning methods, that reduces the required training time and improves generalisation. We draw inspiration from Transfer of Learning approaches to reduce the start-up time to training each incremental Ensemble member. We show a set of experiments that outlines some preliminary results on some common Deep Learning datasets and discuss the potential improvements Deep In...

On excursion increments in heartbeat dynamics

International Nuclear Information System (INIS)

Guzmán-Vargas, L.; Reyes-Ramírez, I.; Hernández-Pérez, R.

2013-01-01

We study correlation properties of excursion increments of heartbeat time series from healthy subjects and heart failure patients. We construct the excursion time based on the original heartbeat time series, representing the time employed by the walker to return to the local mean value. Next, the detrended fluctuation analysis and the fractal dimension method are applied to the magnitude and sign of the increments in the time excursions between successive excursions for the mentioned groups. Our results show that for magnitude series of excursion increments both groups display long-range correlations with similar correlation exponents, indicating that large (small) increments (decrements) are more likely to be followed by large (small) increments (decrements). For sign sequences and for both groups, we find that increments are short-range anti-correlated, which is noticeable under heart failure conditions

Blood flow patterns during incremental and steady-state aerobic exercise.

Science.gov (United States)

Coovert, Daniel; Evans, LeVisa D; Jarrett, Steven; Lima, Carla; Lima, Natalia; Gurovich, Alvaro N

2017-05-30

Endothelial shear stress (ESS) is a physiological stimulus for vascular homeostasis, highly dependent on blood flow patterns. Exercise-induced ESS might be beneficial on vascular health. However, it is unclear what type of ESS aerobic exercise (AX) produces. The aims of this study are to characterize exercise-induced blood flow patterns during incremental and steady-state AX. We expect blood flow pattern during exercise will be intensity-dependent and bidirectional. Six college-aged students (2 males and 4 females) were recruited to perform 2 exercise tests on cycleergometer. First, an 8-12-min incremental test (Test 1) where oxygen uptake (VO2), heart rate (HR), blood pressure (BP), and blood lactate (La) were measured at rest and after each 2-min step. Then, at least 48-hr. after the first test, a 3-step steady state exercise test (Test 2) was performed measuring VO2, HR, BP, and La. The three steps were performed at the following exercise intensities according to La: 0-2 mmol/L, 2-4 mmol/L, and 4-6 mmol/L. During both tests, blood flow patterns were determined by high-definition ultrasound and Doppler on the brachial artery. These measurements allowed to determine blood flow velocities and directions during exercise. On Test 1 VO2, HR, BP, La, and antegrade blood flow velocity significantly increased in an intensity-dependent manner (repeated measures ANOVA, pflow velocity did not significantly change during Test 1. On Test 2 all the previous variables significantly increased in an intensity-dependent manner (repeated measures ANOVA, pflow patterns during incremental and steady-state exercises include both antegrade and retrograde blood flows.

Incremental elongation or ratchetting - Experimental tests and practical method of analysis (on stainless steel 304L and 306L)

International Nuclear Information System (INIS)

Cousseran, Pierre; Lebey, Jacques; Roche, Roland; Clement, Gerard; Moulin, Didier.

1980-12-01

Ratchetting, or incremental elongation can be considered as a creep enhancement when cyclic deformations are added to a primary constant load. Under examination, it appears that theoretical models proposed till now do not fit correctly the actual behavior of materials. From experimental tests results performed in Saclay, a simplified method for prevention of ratcheting is proposed. A validation was made by using experimental data from various sources [fr

Limitations of Spectral Electromyogramic Analysis to Determine the Onset of Neuromuscular Fatigue Threshold during Incremental Ergometer Cycling

Directory of Open Access Journals (Sweden)

Iban Latasa, Alfredo Cordova, Armando Malanda, Javier Navallas, Ana Lavilla-Oiz, Javier Rodriguez-Falces

2016-03-01

Full Text Available Recently, a new method has been proposed to detect the onset of neuromuscular fatigue during an incremental cycling test by assessing the changes in spectral electromyographic (sEMG frequencies within individual exercise periods of the test. The method consists on determining the highest power output that can be sustained without a significant decrease in spectral frequencies. This study evaluated the validity of the new approach by assessing the changes in spectral indicators both throughout the whole test and within individual exercise periods of the test. Fourteen cyclists performed incremental cycle ergometer rides to exhaustion with bipolar surface EMG signals recorded from the vastus lateralis. The mean and median frequencies (Fmean and Fmedian, respectively of the sEMG power spectrum were calculated. The main findings were: (1 Examination of spectral indicators within individual exercise periods of the test showed that neither Fmean nor Fmedian decreased significantly during the last (most fatiguing exercise periods. (2 Examination of the whole incremental test showed that the behaviour of Fmean and Fmedian with increasing power output was highly inconsistent and varied greatly among subjects. (3 Over the whole incremental test, half of the participants exhibited a positive relation between spectral indicators and workload, whereas the other half demonstrated the opposite behavior. Collectively, these findings indicate that spectral sEMG indexes do not provide a reliable measure of the fatigue state of the muscle during an incremental cycling test. Moreover, it is concluded that it is not possible to determine the onset of neuromuscular fatigue during an incremental cycling test by examining spectral indicators within individual exercise periods of the test.

Legislative Bargaining and Incremental Budgeting

OpenAIRE

Dhammika Dharmapala

2002-01-01

The notion of 'incrementalism', formulated by Aaron Wildavsky in the 1960's, has been extremely influential in the public budgeting literature. In essence, it entails the claim that legislators engaged in budgetary policymaking accept past allocations, and decide only on the allocation of increments to revenue. Wildavsky explained incrementalism with reference to the cognitive limitations of lawmakers and their desire to reduce conflict. This paper uses a legislative bargaining framework to u...

Power calculation of linear and angular incremental encoders

Science.gov (United States)

Prokofev, Aleksandr V.; Timofeev, Aleksandr N.; Mednikov, Sergey V.; Sycheva, Elena A.

2016-04-01

Automation technology is constantly expanding its role in improving the efficiency of manufacturing and testing processes in all branches of industry. More than ever before, the mechanical movements of linear slides, rotary tables, robot arms, actuators, etc. are numerically controlled. Linear and angular incremental photoelectric encoders measure mechanical motion and transmit the measured values back to the control unit. The capabilities of these systems are undergoing continual development in terms of their resolution, accuracy and reliability, their measuring ranges, and maximum speeds. This article discusses the method of power calculation of linear and angular incremental photoelectric encoders, to find the optimum parameters for its components, such as light emitters, photo-detectors, linear and angular scales, optical components etc. It analyzes methods and devices that permit high resolutions in the order of 0.001 mm or 0.001°, as well as large measuring lengths of over 100 mm. In linear and angular incremental photoelectric encoders optical beam is usually formulated by a condenser lens passes through the measuring unit changes its value depending on the movement of a scanning head or measuring raster. Past light beam is converting into an electrical signal by the photo-detecter's block for processing in the electrical block. Therefore, for calculating the energy source is a value of the desired value of the optical signal at the input of the photo-detecter's block, which reliably recorded and processed in the electronic unit of linear and angular incremental optoelectronic encoders. Automation technology is constantly expanding its role in improving the efficiency of manufacturing and testing processes in all branches of industry. More than ever before, the mechanical movements of linear slides, rotary tables, robot arms, actuators, etc. are numerically controlled. Linear and angular incremental photoelectric encoders measure mechanical motion and

How to set the stage for a full-fledged clinical trial testing 'incremental haemodialysis'.

Science.gov (United States)

Casino, Francesco Gaetano; Basile, Carlo

2017-07-21

Most people who make the transition to maintenance haemodialysis (HD) therapy are treated with a fixed dose of thrice-weekly HD (3HD/week) regimen without consideration of their residual kidney function (RKF). The RKF provides an effective and naturally continuous clearance of both small and middle molecules, plays a major role in metabolic homeostasis, nutritional status and cardiovascular health, and aids in fluid management. The RKF is associated with better patient survival and greater health-related quality of life. Its preservation is instrumental to the prescription of incremental (1HD/week to 2HD/week) HD. The recently heightened interest in incremental HD has been hindered by the current limitations of the urea kinetic model (UKM), which tend to overestimate the needed dialysis dose in the presence of a substantial RKF. A recent paper by Casino and Basile suggested a variable target model (VTM), which gives more clinical weight to the RKF and allows less frequent HD treatments at lower RKF as opposed to the fixed target model, based on the wrong concept of the clinical equivalence between renal and dialysis clearance. A randomized controlled trial (RCT) enrolling incident patients and comparing incremental HD (prescribed according to the VTM) with the standard 3HD/week schedule and focused on hard outcomes, such as survival and health-related quality of life of patients, is urgently needed. The first step in designing such a study is to compute the 'adequacy lines' and the associated fitting equations necessary for the most appropriate allocation of the patients in the two arms and their correct and safe follow-up. In conclusion, the potentially important clinical and financial implications of the incremental HD render it highly promising and warrant RCTs. The UKM is the keystone for conducting such studies. © The Author 2017. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Do otolith increments allow correct inferences about age and growth of coral reef fishes?

Science.gov (United States)

Booth, D. J.

2014-03-01

Otolith increment structure is widely used to estimate age and growth of marine fishes. Here, I test the accuracy of the long-term otolith increment analysis of the lemon damselfish Pomacentrus moluccensis to describe age and growth characteristics. I compare the number of putative annual otolith increments (as a proxy for actual age) and widths of these increments (as proxies for somatic growth) with actual tagged fish-length data, based on a 6-year dataset, the longest time course for a coral reef fish. Estimated age from otoliths corresponded closely with actual age in all cases, confirming annual increment formation. However, otolith increment widths were poor proxies for actual growth in length [linear regression r 2 = 0.44-0.90, n = 6 fish] and were clearly of limited value in estimating annual growth. Up to 60 % of the annual growth variation was missed using otolith increments, suggesting the long-term back calculations of otolith growth characteristics of reef fish populations should be interpreted with caution.

Influence of regression model and incremental test protocol on the relationship between lactate threshold using the maximal-deviation method and performance in female runners.

Science.gov (United States)

Machado, Fabiana Andrade; Nakamura, Fábio Yuzo; Moraes, Solange Marta Franzói De

2012-01-01

This study examined the influence of the regression model and initial intensity of an incremental test on the relationship between the lactate threshold estimated by the maximal-deviation method and the endurance performance. Sixteen non-competitive, recreational female runners performed a discontinuous incremental treadmill test. The initial speed was set at 7 km · h⁻¹, and increased every 3 min by 1 km · h⁻¹ with a 30-s rest between the stages used for earlobe capillary blood sample collection. Lactate-speed data were fitted by an exponential-plus-constant and a third-order polynomial equation. The lactate threshold was determined for both regression equations, using all the coordinates, excluding the first and excluding the first and second initial points. Mean speed of a 10-km road race was the performance index (3.04 ± 0.22 m · s⁻¹). The exponentially-derived lactate threshold had a higher correlation (0.98 ≤ r ≤ 0.99) and smaller standard error of estimate (SEE) (0.04 ≤ SEE ≤ 0.05 m · s⁻¹) with performance than the polynomially-derived equivalent (0.83 ≤ r ≤ 0.89; 0.10 ≤ SEE ≤ 0.13 m · s⁻¹). The exponential lactate threshold was greater than the polynomial equivalent (P performance index that is independent of the initial intensity of the incremental test and better than the polynomial equivalent.

Unmanned Maritime Systems Incremental Acquisition Approach

Science.gov (United States)

2016-12-01

REPORT TYPE AND DATES COVERED MBA professional report 4. TITLE AND SUBTITLE UNMANNED MARITIME SYSTEMS INCREMENTAL ACQUISITION APPROACH 5. FUNDING...Approved for public release. Distribution is unlimited. UNMANNED MARITIME SYSTEMS INCREMENTAL ACQUISITION APPROACH Thomas Driscoll, Lieutenant...UNMANNED MARITIME SYSTEMS INCREMENTAL ACQUISITION APPROACH ABSTRACT The purpose of this MBA report is to explore and understand the issues

Incremental Volumetric Remapping Method: Analysis and Error Evaluation

International Nuclear Information System (INIS)

Baptista, A. J.; Oliveira, M. C.; Rodrigues, D. M.; Menezes, L. F.; Alves, J. L.

2007-01-01

In this paper the error associated with the remapping problem is analyzed. A range of numerical results that assess the performance of three different remapping strategies, applied to FE meshes that typically are used in sheet metal forming simulation, are evaluated. One of the selected strategies is the previously presented Incremental Volumetric Remapping method (IVR), which was implemented in the in-house code DD3TRIM. The IVR method fundaments consists on the premise that state variables in all points associated to a Gauss volume of a given element are equal to the state variable quantities placed in the correspondent Gauss point. Hence, given a typical remapping procedure between a donor and a target mesh, the variables to be associated to a target Gauss volume (and point) are determined by a weighted average. The weight function is the Gauss volume percentage of each donor element that is located inside the target Gauss volume. The calculus of the intersecting volumes between the donor and target Gauss volumes is attained incrementally, for each target Gauss volume, by means of a discrete approach. The other two remapping strategies selected are based in the interpolation/extrapolation of variables by using the finite element shape functions or moving least square interpolants. The performance of the three different remapping strategies is address with two tests. The first remapping test was taken from a literature work. The test consists in remapping successively a rotating symmetrical mesh, throughout N increments, in an angular span of 90 deg. The second remapping error evaluation test consists of remapping an irregular element shape target mesh from a given regular element shape donor mesh and proceed with the inverse operation. In this second test the computation effort is also measured. The results showed that the error level associated to IVR can be very low and with a stable evolution along the number of remapping procedures when compared with the

Evolving effective incremental SAT solvers with GP

OpenAIRE

Bader, Mohamed; Poli, R.

2008-01-01

Hyper-Heuristics could simply be defined as heuristics to choose other heuristics, and it is a way of combining existing heuristics to generate new ones. In a Hyper-Heuristic framework, the framework is used for evolving effective incremental (Inc*) solvers for SAT. We test the evolved heuristics (IncHH) against other known local search heuristics on a variety of benchmark SAT problems.

FEM Simulation of Incremental Shear

International Nuclear Information System (INIS)

Rosochowski, Andrzej; Olejnik, Lech

2007-01-01

A popular way of producing ultrafine grained metals on a laboratory scale is severe plastic deformation. This paper introduces a new severe plastic deformation process of incremental shear. A finite element method simulation is carried out for various tool geometries and process kinematics. It has been established that for the successful realisation of the process the inner radius of the channel as well as the feeding increment should be approximately 30% of the billet thickness. The angle at which the reciprocating die works the material can be 30 deg. . When compared to equal channel angular pressing, incremental shear shows basic similarities in the mode of material flow and a few technological advantages which make it an attractive alternative to the known severe plastic deformation processes. The most promising characteristic of incremental shear is the possibility of processing very long billets in a continuous way which makes the process more industrially relevant

OXYGEN UPTAKE KINETICS DURING INCREMENTAL- AND DECREMENTAL-RAMP CYCLE ERGOMETRY

Directory of Open Access Journals (Sweden)

Fadıl Özyener

2011-09-01

Full Text Available The pulmonary oxygen uptake (VO2 response to incremental-ramp cycle ergometry typically demonstrates lagged-linear first-order kinetics with a slope of ~10-11 ml·min-1·W-1, both above and below the lactate threshold (ӨL, i.e. there is no discernible VO2 slow component (or "excess" VO2 above ӨL. We were interested in determining whether a reverse ramp profile would yield the same response dynamics. Ten healthy males performed a maximum incremental -ramp (15-30 W·min-1, depending on fitness. On another day, the work rate (WR was increased abruptly to the incremental maximum and then decremented at the same rate of 15-30 W.min-1 (step-decremental ramp. Five subjects also performed a sub-maximal ramp-decremental test from 90% of ӨL. VO2 was determined breath-by-breath from continuous monitoring of respired volumes (turbine and gas concentrations (mass spectrometer. The incremental-ramp VO2-WR slope was 10.3 ± 0.7 ml·min-1·W-1, whereas that of the descending limb of the decremental ramp was 14.2 ± 1.1 ml·min-1·W-1 (p < 0.005. The sub-maximal decremental-ramp slope, however, was only 9. 8 ± 0.9 ml·min-1·W-1: not significantly different from that of the incremental-ramp. This suggests that the VO2 response in the supra-ӨL domain of incremental-ramp exercise manifest not actual, but pseudo, first-order kinetics

Incremental testing of the Community Multiscale Air Quality (CMAQ modeling system version 4.7

Directory of Open Access Journals (Sweden)

K. M. Foley

2010-03-01

Full Text Available This paper describes the scientific and structural updates to the latest release of the Community Multiscale Air Quality (CMAQ modeling system version 4.7 (v4.7 and points the reader to additional resources for further details. The model updates were evaluated relative to observations and results from previous model versions in a series of simulations conducted to incrementally assess the effect of each change. The focus of this paper is on five major scientific upgrades: (a updates to the heterogeneous N₂O₅ parameterization, (b improvement in the treatment of secondary organic aerosol (SOA, (c inclusion of dynamic mass transfer for coarse-mode aerosol, (d revisions to the cloud model, and (e new options for the calculation of photolysis rates. Incremental test simulations over the eastern United States during January and August 2006 are evaluated to assess the model response to each scientific improvement, providing explanations of differences in results between v4.7 and previously released CMAQ model versions. Particulate sulfate predictions are improved across all monitoring networks during both seasons due to cloud module updates. Numerous updates to the SOA module improve the simulation of seasonal variability and decrease the bias in organic carbon predictions at urban sites in the winter. Bias in the total mass of fine particulate matter (PM_2.5 is dominated by overpredictions of unspeciated PM_2.5 (PM_other in the winter and by underpredictions of carbon in the summer. The CMAQv4.7 model results show slightly worse performance for ozone predictions. However, changes to the meteorological inputs are found to have a much greater impact on ozone predictions compared to changes to the CMAQ modules described here. Model updates had little effect on existing biases in wet deposition predictions.

Incremental change or initial differences? Testing two models of marital deterioration.

Science.gov (United States)

Lavner, Justin A; Bradbury, Thomas N; Karney, Benjamin R

2012-08-01

Most couples begin marriage intent on maintaining a fulfilling relationship, but some newlyweds soon struggle, and others continue to experience high levels of satisfaction. Do these diverse outcomes result from an incremental process that unfolds over time, as prevailing models suggest, or are they a manifestation of initial differences that are largely evident at the start of the marriage? Using 8 waves of data collected over the first 4 years of marriage (N = 502 spouses, or 251 newlywed marriages), we tested these competing perspectives first by identifying 3 qualitatively distinct relationship satisfaction trajectory groups and then by determining the extent to which spouses in these groups were differentiated on the basis of (a) initial scores and (b) 4-year changes in a set of established predictor variables, including relationship problems, aggression, attributions, stress, and self-esteem. The majority of spouses exhibited high, stable satisfaction over the first 4 years of marriage, whereas declining satisfaction was isolated among couples with relatively low initial satisfaction. Across all predictor variables, initial values afforded stronger discrimination of outcome groups than did rates of change in these variables. Thus, readily measured initial differences are potent antecedents of relationship deterioration, and studies are now needed to clarify the specific ways in which initial indices of risk come to influence changes in spouses' judgments of relationship satisfaction. PsycINFO Database Record (c) 2012 APA, all rights reserved.

Sistemas de custeio baseados em actividades para o Serviço Nacional de Saúde

OpenAIRE

Carvalho, Romeu André Ferreira de

2009-01-01

Trabalho de projecto de mestrado em Engenharia Informática (Engenharia de Software), apresentado à Universidade de Lisboa, através da Faculdade de Ciências, 2009 O principal objectivo deste trabalho é o desenvolvimento de um sistema de informação que dê suporte ao custeio baseado em actividades no domínio hospitalar. Este pretende facilitar a gestão na tomada de decisão, bem como na análise e acompanhamento do processo produtivo. Para além disso pretende-se que o sistema tenha uma grande a...

Influence of regression model and initial intensity of an incremental test on the relationship between the lactate threshold estimated by the maximal-deviation method and running performance.

Science.gov (United States)

Santos-Concejero, Jordan; Tucker, Ross; Granados, Cristina; Irazusta, Jon; Bidaurrazaga-Letona, Iraia; Zabala-Lili, Jon; Gil, Susana María

2014-01-01

This study investigated the influence of the regression model and initial intensity during an incremental test on the relationship between the lactate threshold estimated by the maximal-deviation method and performance in elite-standard runners. Twenty-three well-trained runners completed a discontinuous incremental running test on a treadmill. Speed started at 9 km · h(-1) and increased by 1.5 km · h(-1) every 4 min until exhaustion, with a minute of recovery for blood collection. Lactate-speed data were fitted by exponential and polynomial models. The lactate threshold was determined for both models, using all the co-ordinates, excluding the first and excluding the first and second points. The exponential lactate threshold was greater than the polynomial equivalent in any co-ordinate condition (P performance and is independent of the initial intensity of the test.

VENTILATION BEHAVIOR IN TRAINED AND UNTRAINED MEN DURING INCREMENTAL TEST: EVIDENCE OF ONE METABOLIC TRANSITION POINT

Directory of Open Access Journals (Sweden)

Flávio O. Pires

2008-09-01

Full Text Available This study aimed to describe and compare the ventilation behavior during an incremental test utilizing three mathematical models and to compare the feature of ventilation curve fitted by the best mathematical model between aerobically trained (TR and untrained (UT men. Thirty five subjects underwent a treadmill test with 1 km·h-1 increases every minute until exhaustion. Ventilation averages of 20 seconds were plotted against time and fitted by: bi-segmental regression model (2SRM; three-segmental regression model (3SRM; and growth exponential model (GEM. Residual sum of squares (RSS and mean square error (MSE were calculated for each model. The correlations between peak VO2 (VO2PEAK, peak speed (SpeedPEAK, ventilatory threshold identified by the best model (VT2SRM and the first derivative calculated for workloads below (moderate intensity and above (heavy intensity VT2SRM were calculated. The RSS and MSE for GEM were significantly higher (p < 0.01 than for 2SRM and 3SRM in pooled data and in UT, but no significant difference was observed among the mathematical models in TR. In the pooled data, the first derivative of moderate intensities showed significant negative correlations with VT2SRM (r = -0.58; p < 0.01 and SpeedPEAK (r = -0.46; p < 0.05 while the first derivative of heavy intensities showed significant negative correlation with VT2SRM (r = -0. 43; p < 0.05. In UT group the first derivative of moderate intensities showed significant negative correlations with VT2SRM (r = -0.65; p < 0.05 and SpeedPEAK (r = -0.61; p < 0.05, while the first derivative of heavy intensities showed significant negative correlation with VT2SRM (r= -0.73; p< 0.01, SpeedPEAK (r = -0.73; p < 0.01 and VO2PEAK (r = -0.61; p < 0.05 in TR group. The ventilation behavior during incremental treadmill test tends to show only one threshold. UT subjects showed a slower ventilation increase during moderate intensities while TR subjects showed a slower ventilation increase

Conservation of wildlife populations: factoring in incremental disturbance.

Science.gov (United States)

Stewart, Abbie; Komers, Petr E

2017-06-01

Progressive anthropogenic disturbance can alter ecosystem organization potentially causing shifts from one stable state to another. This potential for ecosystem shifts must be considered when establishing targets and objectives for conservation. We ask whether a predator-prey system response to incremental anthropogenic disturbance might shift along a disturbance gradient and, if it does, whether any disturbance thresholds are evident for this system. Development of linear corridors in forested areas increases wolf predation effectiveness, while high density of development provides a safe-haven for their prey. If wolves limit moose population growth, then wolves and moose should respond inversely to land cover disturbance. Using general linear model analysis, we test how the rate of change in moose ( Alces alces ) density and wolf ( Canis lupus ) harvest density are influenced by the rate of change in land cover and proportion of land cover disturbed within a 300,000 km 2 area in the boreal forest of Alberta, Canada. Using logistic regression, we test how the direction of change in moose density is influenced by measures of land cover change. In response to incremental land cover disturbance, moose declines occurred where 43% of land cover was disturbed and wolf density declined. Wolves and moose appeared to respond inversely to incremental disturbance with the balance between moose decline and wolf increase shifting at about 43% of land cover disturbed. Conservation decisions require quantification of disturbance rates and their relationships to predator-prey systems because ecosystem responses to anthropogenic disturbance shift across disturbance gradients.

On conditional scalar increment and joint velocity-scalar increment statistics

International Nuclear Information System (INIS)

Zhang Hengbin; Wang Danhong; Tong Chenning

2004-01-01

Conditional velocity and scalar increment statistics are usually studied in the context of Kolmogorov's refined similarity hypotheses and are considered universal (quasi-Gaussian) for inertial-range separations. In such analyses the locally averaged energy and scalar dissipation rates are used as conditioning variables. Recent studies have shown that certain local turbulence structures can be captured when the local scalar variance (φ 2 ) r and the local kinetic energy k r are used as the conditioning variables. We study the conditional increments using these conditioning variables, which also provide the local turbulence scales. Experimental data obtained in the fully developed region of an axisymmetric turbulent jet are used to compute the statistics. The conditional scalar increment probability density function (PDF) conditional on (φ 2 ) r is found to be close to Gaussian for (φ 2 ) r small compared with its mean and is sub-Gaussian and bimodal for large (φ 2 ) r , and therefore is not universal. We find that the different shapes of the conditional PDFs are related to the instantaneous degree of non-equilibrium (production larger than dissipation) of the local scalar. There is further evidence of this from the conditional PDF conditional on both (φ 2 ) r and χ r , which is largely a function of (φ 2 ) r /χ r , a measure of the degree of non-equilibrium. The velocity-scalar increment joint PDF is close to joint Gaussian and quad-modal for equilibrium and non-equilibrium local velocity and scalar, respectively. The latter shape is associated with a combination of the ramp-cliff and plane strain structures. Kolmogorov's refined similarity hypotheses also predict a dependence of the conditional PDF on the degree of non-equilibrium. Therefore, the quasi-Gaussian (joint) PDF, previously observed in the context of Kolmogorov's refined similarity hypotheses, is only one of the conditional PDF shapes of inertial range turbulence. The present study suggests that

The Validity and Incremental Validity of Knowledge Tests, Low-Fidelity Simulations, and High-Fidelity Simulations for Predicting Job Performance in Advanced-Level High-Stakes Selection

Science.gov (United States)

Lievens, Filip; Patterson, Fiona

2011-01-01

In high-stakes selection among candidates with considerable domain-specific knowledge and experience, investigations of whether high-fidelity simulations (assessment centers; ACs) have incremental validity over low-fidelity simulations (situational judgment tests; SJTs) are lacking. Therefore, this article integrates research on the validity of…

Modelo de sistemas de informação técnica baseado numa plataforma SIG

OpenAIRE

Almeida, António Manuel Galinho Pires de

2006-01-01

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Ciência e Sistemas de Informação Geográfica O presente trabalho pretende desenvolver um modelo conceptual de um Sistema de Informação Técnica (SIT) baseado numa plataforma SIG, aplicado à Industria, mais especificamente à rede eléctrica de uma fábrica, apresentando ao mesmo tempo a metodologia a seguir na integração do modelo numa organização, e as vantagens que uma ferramenta como esta poderá pro...

Prediction of maximal lactate steady state in runners with an incremental test on the field.

Science.gov (United States)

Leti, Thomas; Mendelson, Monique; Laplaud, David; Flore, Patrice

2012-01-01

During a maximal incremental ergocycle test, the power output associated with Respiratory Exchange Ratio equal to 1.00 (RER = 1.00) predicts maximal lactate steady state (MLSS). We hypothesised that these results are transferable for runners on the field. Fourteen runners performed a maximal progressive test, to assess the speed associated with RER = 1.00, and several 30 minutes constant velocity tests to determine the speed at MLSS. We observed that the speeds at RER = 1.00, at the second ventilatory threshold (VT2) and at MLSS did not differ (15.7 ± 1.1 km · h⁻¹, 16.2 ± 1.4 km · h⁻¹, 15.5 ± 1.1 km · h⁻¹ respectively). The speed associated with RER = 1.00 was better correlated with that at MLSS (r = 0.79; p = 0.0008) than that at VT2 (r = 0.73; p = 0.002). Neither the concentration of blood lactate nor the heart rate differed between the speed at RER = 1.00 and that at MLSS from the 10th and the 30th minute of the constant velocity test. Bland and Altman analysis showed a fair agreement between the speed at MLSS and that at RER (0.2 ± 1.4 km · h⁻¹). This study demonstrated that the speed associated with RER = 1.00 determined during maximal progressive track running allows a fair estimation of the speed associated with MLSS, markedly decreasing the burden of numerous invasive tests required to assess it.

Implementação de um sistema de custos baseado em atividades em um ambiente industrial

OpenAIRE

Gino Berninzon Di Domenico

1994-01-01

Resumo: Este trabalho descreve inicialmente, as principais características, a estrutura e as limitações dos sistemas de custeio tradicionais. Nesta etapa detalha-se os Sistemas de Custeio Total, apresentando os modelos dos Sistemas de Custeio por Taxa e do Sistema de Custeio por Absorção. Posteriormente, são introduzi das e detalhadas as características básicas e a estrutura de uma nova abordagem para a área de custos, a do Custeio -Baseado em Atividades (Activity Based Costing). É desenvolv...

Incremental projection approach of regularization for inverse problems

Energy Technology Data Exchange (ETDEWEB)

Souopgui, Innocent, E-mail: innocent.souopgui@usm.edu [The University of Southern Mississippi, Department of Marine Science (United States); Ngodock, Hans E., E-mail: hans.ngodock@nrlssc.navy.mil [Naval Research Laboratory (United States); Vidard, Arthur, E-mail: arthur.vidard@imag.fr; Le Dimet, François-Xavier, E-mail: ledimet@imag.fr [Laboratoire Jean Kuntzmann (France)

2016-10-15

This paper presents an alternative approach to the regularized least squares solution of ill-posed inverse problems. Instead of solving a minimization problem with an objective function composed of a data term and a regularization term, the regularization information is used to define a projection onto a convex subspace of regularized candidate solutions. The objective function is modified to include the projection of each iterate in the place of the regularization. Numerical experiments based on the problem of motion estimation for geophysical fluid images, show the improvement of the proposed method compared with regularization methods. For the presented test case, the incremental projection method uses 7 times less computation time than the regularization method, to reach the same error target. Moreover, at convergence, the incremental projection is two order of magnitude more accurate than the regularization method.

Respiratory ammonia output and blood ammonia concentration during incremental exercise

NARCIS (Netherlands)

Ament, W; Huizenga, [No Value; Kort, E; van der Mark, TW; Grevink, RG; Verkerke, GJ

The aim of this study was to investigate whether the increase of ammonia concentration and lactate concentration in blood was accompanied by an increased expiration of ammonia during graded exercise. Eleven healthy subjects performed an incremental cycle ergometer test. Blood ammonia, blood lactate

Reliability of an incremental exercise test to evaluate acute blood lactate, heart rate and body temperature responses in Labrador retrievers.

Science.gov (United States)

Ferasin, Luca; Marcora, Samuele

2009-10-01

Thirteen healthy Labrador retrievers underwent a 5-stage incremental treadmill exercise test to assess its reliability. Blood lactate (BL), heart rate (HR), and body temperature (BT) were measured at rest, after each stage of exercise, and after a 20-min recovery. Reproducibility was assessed by repeating the test after 7 days. Two-way MANOVAs revealed significant differences between consecutive stages, and between values at rest and after recovery. There was also a significant reduction in physiological strain between the first and second trial (learning effect). Test reliability expressed as typical error (BL = 0.22 mmol/l, HR = 9.81 bpm, BT = 0.22 degrees C), coefficient of variation (BL = 19.3%, HR = 7.9% and BT = 0.6%) and test-retest correlation (BL = 0.89, HR = 0.96, BT = 0.95) was good. Results support test reproducibility although the learning effect needs to be controlled when investigating the exercise-related problems commonly observed in this breed.

Tutoria em leitura e escrita baseado no modelo de RTI – resposta à intervenção em crianças com dislexia do desenvolvimento

Directory of Open Access Journals (Sweden)

Andréa Carla Machado

2014-08-01

Full Text Available Objetivo analisar e comparar o desempenho em tarefas de leitura e escrita em crianças com dislexia do desenvolvimento após tutoria baseado no modelo de resposta à intervenção. Métodos participaram deste estudo 15 crianças com o diagnóstico interdisciplinar de dislexia do desenvolvimento de 2º ao 6º ano do ensino fundamental da rede pública municipal da cidade de Marília-SP, com faixa etária de oito a 12 anos de idade, de ambos os sexos, sendo 75% do sexo masculino, divididos em Grupo I – grupo experimental (sete crianças que receberam intervenção e Grupo II – grupo controle (oito crianças não receberam a intervenção, os mesmos foram pareados segundo sexo e faixa etária com o Grupo I. As crianças foram submetidas ao levantamento diagnóstico de Leitura e Escrita e ao programa de intervenção em tutoria baseado no Modelo de Resposta à Intervenção . Os resultados foram analisados estatisticamente por meio do teste de Wilcoxon e Teste de Kruskal-Wallis para verificar possíveis diferenças de desempenho nas tarefas entre os grupos estudados. Resultados os resultados revelaram diferença estatisticamente significante entre o Grupo I e o Grupo II, onde as crianças com dislexia do Grupo I apresentaram desempenho superior na tarefade leitura de palavras e leitura do livro I em relação às crianças do Grupo II. Conclusão grupo I apresentou avanços significantes comparados à Grupo II, que não recebeu intervenção de tutoria.

48 CFR 3432.771 - Provision for incremental funding.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Provision for incremental funding. 3432.771 Section 3432.771 Federal Acquisition Regulations System DEPARTMENT OF EDUCATION..., Incremental Funding, in a solicitation if a cost-reimbursement contract using incremental funding is...

Does the incremental shuttle walk test require maximal effort in young obese women?

Directory of Open Access Journals (Sweden)

S.P. Jürgensen

2016-01-01

Full Text Available Obesity is a chronic disease with a multifaceted treatment approach that includes nutritional counseling, structured exercise training, and increased daily physical activity. Increased body mass elicits higher cardiovascular, ventilatory and metabolic demands to varying degrees during exercise. With functional capacity assessment, this variability can be evaluated so individualized guidance for exercise training and daily physical activity can be provided. The aim of the present study was to compare cardiovascular, ventilatory and metabolic responses obtained during a symptom-limited cardiopulmonary exercise test (CPX on a treadmill to responses obtained by the incremental shuttle walk test (ISWT in obese women and to propose a peak oxygen consumption (VO2 prediction equation through variables obtained during the ISWT. Forty obese women (BMI ≥30 kg/m2 performed one treadmill CPX and two ISWTs. Heart rate (HR, arterial blood pressure (ABP and perceived exertion by the Borg scale were measured at rest, during each stage of the exercise protocol, and throughout the recovery period. The predicted maximal heart rate (HRmax was calculated (210 – age in years (16 and compared to the HR response during the CPX. Peak VO2 obtained during CPX correlated significantly (P<0.05 with ISWT peak VO2 (r=0.79 as well as ISWT distance (r=0.65. The predictive model for CPX peak VO2, using age and ISWT distance explained 67% of the variability. The current study indicates the ISWT may be used to predict aerobic capacity in obese women when CPX is not a viable option.

Automated test data generation for branch testing using incremental

Indian Academy of Sciences (India)

Cost of software testing can be reduced by automated test data generation to find a minimal set of data that has maximum coverage. Search-based software testing (SBST) is one of the techniques recently used for automated testing task. SBST makes use of control flow graph (CFG) and meta-heuristic search algorithms to ...

Mapa de energia baseado em predição para redes de sensores sem fio

OpenAIRE

Raquel Aparecida de Freitas Mini

2004-01-01

O objetivo deste trabalho é construir o mapa de energia de uma rede de sensores sem fio utilizando técnicas de predição. Em mapas de energia baseados em predição, cada nó sensor utiliza algoritmos de predição para modelar sua dissipação de energia com o objetivo de prever seu consumo de energia no futuro. Nesta situação, ao invés de enviar para o nó sorvedouro apenas sua quantidade de energia disponível, cada sensor envia também os parâmetros do modelo que descreve seu consumo de energia. O n...

Increment memory module for spectrometric data recording

International Nuclear Information System (INIS)

Zhuchkov, A.A.; Myagkikh, A.I.

1988-01-01

Incremental memory unit designed to input differential energy spectra of nuclear radiation is described. ROM application as incremental device has allowed to reduce the number of elements and do simplify information readout from the unit. 12-bit 2048 channels present memory unit organization. The device is connected directly with the bus of microprocessor systems similar to KR 580. Incrementation maximal time constitutes 3 mks. It is possible to use this unit in multichannel counting mode

Small Diameter Bomb Increment II (SDB II)

Science.gov (United States)

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-439 Small Diameter Bomb Increment II (SDB II) As of FY 2017 President’s Budget Defense... Bomb Increment II (SDB II) DoD Component Air Force Joint Participants Department of the Navy Responsible Office References SAR Baseline (Production...Mission and Description Small Diameter Bomb Increment II (SDB II) is a joint interest United States Air Force (USAF) and Department of the Navy

Influence of the selection from incremental stages on lactate minimum intensity: a pilot study

Directory of Open Access Journals (Sweden)

Willian Eiji Miyagi

2013-09-01

Full Text Available The purposes of this study were to assess the influence of stage selection from the incremental phase and the use of peak lactate after hyperlactatemia induction on the determination of the lactate minimum intensity (iLACmin. Twelve moderately active university students (23±5 years, 78.3±14.1 kg, 175.3±5.1 cm performed a maximal incremental test to determine the respiratory compensation point (RCP (initial intensity at 70 W and increments of 17.5 W every 2 minutes and a lactate minimum test (induction with the Wingate test, the incremental test started at 30 W below RCP with increments of 10 W every 3 minutes on a cycle ergometer. The iLACmin was determined using second order polynomial adjustment applying five exercise stage selection: 1 using all stages (iLACmin P; 2 using all stages below and two stages above iLACminP (iLACminA; 3 using two stages below and all stages above iLACminP (iLACminB; 4 using the largest and same possible number of stages below and above the iLACminP (iLACminI; 5 using all stages and peak lactate after hyperlactatemia induction (iLACminD. No differences were found between the iLACminP (138.2±30.2 W, iLACminA (139.1±29.1 W, iLACminB (135.3±14.2 W, iLACminI (138.6±20.5 W and iLACmiD (136.7±28.5 W protocols, and a high level of agreement between these intensities and iLACminP was observed. Oxygen uptake, heart rate, rating of perceived exertion and lactate corresponding to these intensities was not different and was strongly correlated. However, the iLACminB presented the lowest success rate (66.7%. In conclusion, stage selection did not influence the determination of iLACmin but modified the success rate

Planning Through Incrementalism

Science.gov (United States)

Lasserre, Ph.

1974-01-01

An incremental model of decisionmaking is discussed and compared with the Comprehensive Rational Approach. A model of reconciliation between the two approaches is proposed, and examples are given in the field of economic development and educational planning. (Author/DN)

FDTD Stability: Critical Time Increment

OpenAIRE

Z. Skvor; L. Pauk

2003-01-01

A new approach suitable for determination of the maximal stable time increment for the Finite-Difference Time-Domain (FDTD) algorithm in common curvilinear coordinates, for general mesh shapes and certain types of boundaries is presented. The maximal time increment corresponds to a characteristic value of a Helmholz equation that is solved by a finite-difference (FD) method. If this method uses exactly the same discretization as the given FDTD method (same mesh, boundary conditions, order of ...

Incremental Visualizer for Visible Objects

DEFF Research Database (Denmark)

Bukauskas, Linas; Bøhlen, Michael Hanspeter

This paper discusses the integration of database back-end and visualizer front-end into a one tightly coupled system. The main aim which we achieve is to reduce the data pipeline from database to visualization by using incremental data extraction of visible objects in a fly-through scenarios. We...... also argue that passing only relevant data from the database will substantially reduce the overall load of the visualization system. We propose the system Incremental Visualizer for Visible Objects (IVVO) which considers visible objects and enables incremental visualization along the observer movement...... path. IVVO is the novel solution which allows data to be visualized and loaded on the fly from the database and which regards visibilities of objects. We run a set of experiments to convince that IVVO is feasible in terms of I/O operations and CPU load. We consider the example of data which uses...

Protocolos de interação baseados em conhecimento: implementação da plataforma JamSession

OpenAIRE

Diego Mira David

2012-01-01

JamSession foi proposto como uma plataforma para mediar e coordenar, por meio de protocolos de interação baseados em conhecimento, recursos computacionais existentes com o objetivo de compor novos serviços e desenvolver aplicações inovadoras. Entre as principais características da plataforma estão sua base formal e declarativa para permitir análise e verificação formal dos protocolos, alta performance e foco na usabilidade. A plataforma pode ser utilizada, por exemplo, na construção de ambien...

The incremental role of trait emotional intelligence on perceived cervical screening barriers.

Science.gov (United States)

Costa, Sebastiano; Barberis, Nadia; Larcan, Rosalba; Cuzzocrea, Francesca

2018-02-13

Researchers have become increasingly interested in investigating the role of the psychological aspects related to the perception of cervical screening barriers. This study investigates the influence of trait EI on perceived cervical screening barriers. Furthermore, this study investigates the incremental validity of trait EI beyond the Big Five, as well as emotion regulation in the perceived barrier towards the Pap test as revealed in a sample of 206 Italian women that were undergoing cervical screening. Results have shown that trait EI is negatively related to cervical screening barriers. Furthermore, trait EI can be considered as a strong incremental predictor of a woman's perception of screening over and above the Big Five, emotion regulation, age, sexual intercourse experience and past Pap test. Detailed information on the study findings and future research directions are discussed.

Power variation for Gaussian processes with stationary increments

DEFF Research Database (Denmark)

Barndorff-Nielsen, Ole Eiler; Corcuera, J.M.; Podolskij, Mark

2009-01-01

We develop the asymptotic theory for the realised power variation of the processes X=•G, where G is a Gaussian process with stationary increments. More specifically, under some mild assumptions on the variance function of the increments of G and certain regularity conditions on the path of the pr......We develop the asymptotic theory for the realised power variation of the processes X=•G, where G is a Gaussian process with stationary increments. More specifically, under some mild assumptions on the variance function of the increments of G and certain regularity conditions on the path...... a chaos representation....

Real Time Implementation of Incremental Fuzzy Logic Controller for Gas Pipeline Corrosion Control

Directory of Open Access Journals (Sweden)

Gopalakrishnan Jayapalan

2014-01-01

Full Text Available A robust virtual instrumentation based fuzzy incremental corrosion controller is presented to protect metallic gas pipelines. Controller output depends on error and change in error of the controlled variable. For corrosion control purpose pipe to soil potential is considered as process variable. The proposed fuzzy incremental controller is designed using a very simple control rule base and the most natural and unbiased membership functions. The proposed scheme is tested for a wide range of pipe to soil potential control. Performance comparison between the conventional proportional integral type and proposed fuzzy incremental controller is made in terms of several performance criteria such as peak overshoot, settling time, and rise time. Result shows that the proposed controller outperforms its conventional counterpart in each case. Designed controller can be taken in automode without waiting for initial polarization to stabilize. Initial startup curve of proportional integral controller and fuzzy incremental controller is reported. This controller can be used to protect any metallic structures such as pipelines, tanks, concrete structures, ship, and offshore structures.

Incremental passivity and output regulation for switched nonlinear systems

Science.gov (United States)

Pang, Hongbo; Zhao, Jun

2017-10-01

This paper studies incremental passivity and global output regulation for switched nonlinear systems, whose subsystems are not required to be incrementally passive. A concept of incremental passivity for switched systems is put forward. First, a switched system is rendered incrementally passive by the design of a state-dependent switching law. Second, the feedback incremental passification is achieved by the design of a state-dependent switching law and a set of state feedback controllers. Finally, we show that once the incremental passivity for switched nonlinear systems is assured, the output regulation problem is solved by the design of global nonlinear regulator controllers comprising two components: the steady-state control and the linear output feedback stabilising controllers, even though the problem for none of subsystems is solvable. Two examples are presented to illustrate the effectiveness of the proposed approach.

[Spatiotemporal variation of Populus euphratica's radial increment at lower reaches of Tarim River after ecological water transfer].

Science.gov (United States)

An, Hong-Yan; Xu, Hai-Liang; Ye, Mao; Yu, Pu-Ji; Gong, Jun-Jun

2011-01-01

Taking the Populus euphratica at lower reaches of Tarim River as test object, and by the methods of tree dendrohydrology, this paper studied the spatiotemporal variation of P. euphratic' s branch radial increment after ecological water transfer. There was a significant difference in the mean radial increment before and after ecological water transfer. The radial increment after the eco-water transfer was increased by 125%, compared with that before the water transfer. During the period of ecological water transfer, the radial increment was increased with increasing water transfer quantity, and there was a positive correlation between the annual radial increment and the total water transfer quantity (R2 = 0.394), suggesting that the radial increment of P. euphratica could be taken as the performance indicator of ecological water transfer. After the ecological water transfer, the radial increment changed greatly with the distance to the River, i.e. , decreased significantly along with the increasing distance to the River (P = 0.007). The P. euphratic' s branch radial increment also differed with stream segment (P = 0.017 ), i.e. , the closer to the head-water point (Daxihaizi Reservoir), the greater the branch radial increment. It was considered that the limited effect of the current ecological water transfer could scarcely change the continually deteriorating situation of the lower reaches of Tarim River.

Two-Point Incremental Forming with Partial Die: Theory and Experimentation

Science.gov (United States)

Silva, M. B.; Martins, P. A. F.

2013-04-01

This paper proposes a new level of understanding of two-point incremental forming (TPIF) with partial die by means of a combined theoretical and experimental investigation. The theoretical developments include an innovative extension of the analytical model for rotational symmetric single point incremental forming (SPIF), originally developed by the authors, to address the influence of the major operating parameters of TPIF and to successfully explain the differences in formability between SPIF and TPIF. The experimental work comprised the mechanical characterization of the material and the determination of its formability limits at necking and fracture by means of circle grid analysis and benchmark incremental sheet forming tests. Results show the adequacy of the proposed analytical model to handle the deformation mechanics of SPIF and TPIF with partial die and demonstrate that neck formation is suppressed in TPIF, so that traditional forming limit curves are inapplicable to describe failure and must be replaced by fracture forming limits derived from ductile damage mechanics. The overall geometric accuracy of sheet metal parts produced by TPIF with partial die is found to be better than that of parts fabricated by SPIF due to smaller elastic recovery upon unloading.

Theory of Single Point Incremental Forming

DEFF Research Database (Denmark)

Martins, P.A.F.; Bay, Niels; Skjødt, Martin

2008-01-01

This paper presents a closed-form theoretical analysis modelling the fundamentals of single point incremental forming and explaining the experimental and numerical results available in the literature for the past couple of years. The model is based on membrane analysis with bi-directional in-plan......-plane contact friction and is focused on the extreme modes of deformation that are likely to be found in single point incremental forming processes. The overall investigation is supported by experimental work performed by the authors and data retrieved from the literature.......This paper presents a closed-form theoretical analysis modelling the fundamentals of single point incremental forming and explaining the experimental and numerical results available in the literature for the past couple of years. The model is based on membrane analysis with bi-directional in...

Efficiency of Oral Incremental Rehearsal versus Written Incremental Rehearsal on Students' Rate, Retention, and Generalization of Spelling Words

Science.gov (United States)

Garcia, Dru; Joseph, Laurice M.; Alber-Morgan, Sheila; Konrad, Moira

2014-01-01

The purpose of this study was to examine the efficiency of an incremental rehearsal oral versus an incremental rehearsal written procedure on a sample of primary grade children's weekly spelling performance. Participants included five second and one first grader who were in need of help with their spelling according to their teachers. An…

Desenvolvimento de Sistemas de Informação baseados em PHP e MySQL, e Java e Oracle

OpenAIRE

Couto, Francisco M; Santos, Emanuel

2011-01-01

Este manual tem como objectivo apoiar o desenvolvimento de sistemas de informação baseados nas linguagens de programação PHP e Java com recurso aos sistemas de gestão de bases de dados relacionais MySQL e Oracle, respectivamente. Este documento introduz os conceitos básicos explicados através de exemplos, que embora tenham sido testados na infra-estrutura informática do Departamento de Informática da FCUL podem ser fácilmente adaptados a qualquer outra infra-estrutura que possuia...

Numerical simulation of pseudoelastic shape memory alloys using the large time increment method

Science.gov (United States)

Gu, Xiaojun; Zhang, Weihong; Zaki, Wael; Moumni, Ziad

2017-04-01

The paper presents a numerical implementation of the large time increment (LATIN) method for the simulation of shape memory alloys (SMAs) in the pseudoelastic range. The method was initially proposed as an alternative to the conventional incremental approach for the integration of nonlinear constitutive models. It is adapted here for the simulation of pseudoelastic SMA behavior using the Zaki-Moumni model and is shown to be especially useful in situations where the phase transformation process presents little or lack of hardening. In these situations, a slight stress variation in a load increment can result in large variations of strain and local state variables, which may lead to difficulties in numerical convergence. In contrast to the conventional incremental method, the LATIN method solve the global equilibrium and local consistency conditions sequentially for the entire loading path. The achieved solution must satisfy the conditions of static and kinematic admissibility and consistency simultaneously after several iterations. 3D numerical implementation is accomplished using an implicit algorithm and is then used for finite element simulation using the software Abaqus. Computational tests demonstrate the ability of this approach to simulate SMAs presenting flat phase transformation plateaus and subjected to complex loading cases, such as the quasi-static behavior of a stent structure. Some numerical results are contrasted to those obtained using step-by-step incremental integration.

Performance Evaluation of Incremental K-means Clustering Algorithm

OpenAIRE

Chakraborty, Sanjay; Nagwani, N. K.

2014-01-01

The incremental K-means clustering algorithm has already been proposed and analysed in paper [Chakraborty and Nagwani, 2011]. It is a very innovative approach which is applicable in periodically incremental environment and dealing with a bulk of updates. In this paper the performance evaluation is done for this incremental K-means clustering algorithm using air pollution database. This paper also describes the comparison on the performance evaluations between existing K-means clustering and i...

Maximal power output during incremental exercise by resistance and endurance trained athletes.

Science.gov (United States)

Sakthivelavan, D S; Sumathilatha, S

2010-01-01

This study was aimed at comparing the maximal power output by resistance trained and endurance trained athletes during incremental exercise. Thirty male athletes who received resistance training (Group I) and thirty male athletes of similar age group who received endurance training (Group II) for a period of more than 1 year were chosen for the study. Physical parameters were measured and exercise stress testing was done on a cycle ergometer with a portable gas analyzing system. The maximal progressive incremental cycle ergometer power output at peak exercise and carbon dioxide production at VO2max were measured. Highly significant (P biofeedback and perk up the athlete's performance.

É possível determinar a economia de corrida através do teste progressivo até a exaustão? Is possible to predict running economy using maximal incremental exercise test?

Directory of Open Access Journals (Sweden)

Rômulo Cássio de Moraes Bertuzzi

2010-09-01

Full Text Available O objetivo do presente estudo foi verificar a possibilidade de se estimar a economia de corrida (EC a partir do coeficiente angular gerado pela relação VO2 vs. intensidade de testes progressivos até a exaustão (EC INCLINA. Para tanto, 16 corredores de provas de longa duração (idade 32 ± 7 anos, massa corporal 70,0 ± 6,7 kg, estatura 173,3 ± 5,0 cm, O2máx 57,9 ± 5,8 ml·kg-1·min-1 foram submetidos a um teste incremental e a dois testes de cargas constantes (12 km·h-1 e a intensidade de 90% do segundo limiar ventilatório para a mensuração da EC. Foram detectadas correlações fracas entre o EC INCLINA e a EC estabelecida a 12 km·h-1 (r = 0,49; p = 0,054 e na intensidade de 90% do segundo limiar ventilatório (r = 0,55; p = 0,027. Além disso, o EC INCLINA também estava negativamente correlacionado com a concentração sanguínea de lactato (r = -0,75; p = 0,001 e a razão de troca respiratória (r = -0,80; p The purpose of the present study was to investigate the association between running economy (RE and the slope of the regression line obtained as the individual relationship between oxygen uptake and the corresponding intensity in the incremental test (EC INCLINA. Sixteen recreational long-distance runners (age 32 ± 7 years, body mass 70,0 ± 6.7 kg, height 173.3 ± 5.0 cm, VO2max 57.9 ± 5.8 ml·kg-1·min-1 performed a progressive incremental test and two submaximal workload tests (at 12 km·h-1 and 90% second ventilatory threshold to determine the RE. There was significant correlation between EC INCLINA and RE measured at 12 km·h-1 (r = 0.49; p = 0.054 and at 90% second ventilatory threshold (r = 0.55; p = 0.027. In addition, EC INCLINA also was negatively correlated with peak blood lactate (r = -0.75; p = 0.001 and peak respiratory exchange rate (r = -0.80; p < 0.001. These findings suggest that EC INCLINA would be an alternative parameter employed to determine the endurance performance in recreational long

Quantum independent increment processes

CERN Document Server

Franz, Uwe

2005-01-01

This volume is the first of two volumes containing the revised and completed notes lectures given at the school "Quantum Independent Increment Processes: Structure and Applications to Physics". This school was held at the Alfried-Krupp-Wissenschaftskolleg in Greifswald during the period March 9 – 22, 2003, and supported by the Volkswagen Foundation. The school gave an introduction to current research on quantum independent increment processes aimed at graduate students and non-specialists working in classical and quantum probability, operator algebras, and mathematical physics. The present first volume contains the following lectures: "Lévy Processes in Euclidean Spaces and Groups" by David Applebaum, "Locally Compact Quantum Groups" by Johan Kustermans, "Quantum Stochastic Analysis" by J. Martin Lindsay, and "Dilations, Cocycles and Product Systems" by B.V. Rajarama Bhat.

Relationship between skin temperature and muscle activation during incremental cycle exercise.

Science.gov (United States)

Priego Quesada, Jose I; Carpes, Felipe P; Bini, Rodrigo R; Salvador Palmer, Rosario; Pérez-Soriano, Pedro; Cibrián Ortiz de Anda, Rosa M

2015-02-01

While different studies showed that better fitness level adds to the efficiency of the thermoregulatory system, the relationship between muscular effort and skin temperature is still unknown. Therefore, the present study assessed the relationship between neuromuscular activation and skin temperature during cycle exercise. Ten physically active participants performed an incremental workload cycling test to exhaustion while neuromuscular activations were recorded (via surface electromyography - EMG) from rectus femoris, vastus lateralis, biceps femoris and gastrocnemius medialis. Thermographic images were recorded before, immediately after and 10 min after finishing the cycling test, at four body regions of interest corresponding to the muscles where neuromuscular activations were monitored. Frequency band analysis was conducted to assess spectral properties of EMG signals in order to infer on priority in recruitment of motor units. Significant inverse relationship between changes in skin temperature and changes in overall neuromuscular activation for vastus lateralis was observed (r0.7 and p<0.01). Participants with larger overall activation and reduced low frequency component for vastus lateralis activation presented a better adaptive response of their thermoregulatory system by showing fewer changes in skin temperature after incremental cycling test. Copyright © 2014 Elsevier Ltd. All rights reserved.

Reliability and validity of the test of incremental respiratory endurance measures of inspiratory muscle performance in COPD.

Science.gov (United States)

Formiga, Magno F; Roach, Kathryn E; Vital, Isabel; Urdaneta, Gisel; Balestrini, Kira; Calderon-Candelario, Rafael A; Campos, Michael A; Cahalin, Lawrence P

2018-01-01

The Test of Incremental Respiratory Endurance (TIRE) provides a comprehensive assessment of inspiratory muscle performance by measuring maximal inspiratory pressure (MIP) over time. The integration of MIP over inspiratory duration (ID) provides the sustained maximal inspiratory pressure (SMIP). Evidence on the reliability and validity of these measurements in COPD is not currently available. Therefore, we assessed the reliability, responsiveness and construct validity of the TIRE measures of inspiratory muscle performance in subjects with COPD. Test-retest reliability, known-groups and convergent validity assessments were implemented simultaneously in 81 male subjects with mild to very severe COPD. TIRE measures were obtained using the portable PrO2 device, following standard guidelines. All TIRE measures were found to be highly reliable, with SMIP demonstrating the strongest test-retest reliability with a nearly perfect intraclass correlation coefficient (ICC) of 0.99, while MIP and ID clustered closely together behind SMIP with ICC values of about 0.97. Our findings also demonstrated known-groups validity of all TIRE measures, with SMIP and ID yielding larger effect sizes when compared to MIP in distinguishing between subjects of different COPD status. Finally, our analyses confirmed convergent validity for both SMIP and ID, but not MIP. The TIRE measures of MIP, SMIP and ID have excellent test-retest reliability and demonstrated known-groups validity in subjects with COPD. SMIP and ID also demonstrated evidence of moderate convergent validity and appear to be more stable measures in this patient population than the traditional MIP.

Incremental short daily home hemodialysis: a case series.

Science.gov (United States)

Toth-Manikowski, Stephanie M; Mullangi, Surekha; Hwang, Seungyoung; Shafi, Tariq

2017-07-05

Patients starting dialysis often have substantial residual kidney function. Incremental hemodialysis provides a hemodialysis prescription that supplements patients' residual kidney function while maintaining total (residual + dialysis) urea clearance (standard Kt/Vurea) targets. We describe our experience with incremental hemodialysis in patients using NxStage System One for home hemodialysis. From 2011 to 2015, we initiated 5 incident hemodialysis patients on an incremental home hemodialysis regimen. The biochemical parameters of all patients remained stable on the incremental hemodialysis regimen and they consistently achieved standard Kt/Vurea targets. Of the two patients with follow-up >6 months, residual kidney function was preserved for ≥2 years. Importantly, the patients were able to transition to home hemodialysis without automatically requiring 5 sessions per week at the outset and gradually increased the number of treatments and/or dialysate volume as the residual kidney function declined. An incremental home hemodialysis regimen can be safely prescribed and may improve acceptability of home hemodialysis. Reducing hemodialysis frequency by even one treatment per week can reduce the number of fistula or graft cannulations or catheter connections by >100 per year, an important consideration for patient well-being, access longevity, and access-related infections. The incremental hemodialysis approach, supported by national guidelines, can be considered for all home hemodialysis patients with residual kidney function.

Thermomechanical simulations and experimental validation for high speed incremental forming

Science.gov (United States)

Ambrogio, Giuseppina; Gagliardi, Francesco; Filice, Luigino; Romero, Natalia

2016-10-01

Incremental sheet forming (ISF) consists in deforming only a small region of the workspace through a punch driven by a NC machine. The drawback of this process is its slowness. In this study, a high speed variant has been investigated from both numerical and experimental points of view. The aim has been the design of a FEM model able to perform the material behavior during the high speed process by defining a thermomechanical model. An experimental campaign has been performed by a CNC lathe with high speed to test process feasibility. The first results have shown how the material presents the same performance than in conventional speed ISF and, in some cases, better material behavior due to the temperature increment. An accurate numerical simulation has been performed to investigate the material behavior during the high speed process confirming substantially experimental evidence.

A maximal incremental effort alters tear osmolarity depending on the fitness level in military helicopter pilots.

Science.gov (United States)

Vera, Jesús; Jiménez, Raimundo; Madinabeitia, Iker; Masiulis, Nerijus; Cárdenas, David

2017-10-01

Fitness level modulates the physiological responses to exercise for a variety of indices. While intense bouts of exercise have been demonstrated to increase tear osmolarity (Tosm), it is not known if fitness level can affect the Tosm response to acute exercise. This study aims to compare the effect of a maximal incremental test on Tosm between trained and untrained military helicopter pilots. Nineteen military helicopter pilots (ten trained and nine untrained) performed a maximal incremental test on a treadmill. A tear sample was collected before and after physical effort to determine the exercise-induced changes on Tosm. The Bayesian statistical analysis demonstrated that Tosm significantly increased from 303.72 ± 6.76 to 310.56 ± 8.80 mmol/L after performance of a maximal incremental test. However, while the untrained group showed an acute Tosm rise (12.33 mmol/L of increment), the trained group experienced a stable Tosm physical effort (1.45 mmol/L). There was a significant positive linear association between fat indices and Tosm changes (correlation coefficients [r] range: 0.77-0.89), whereas the Tosm changes displayed a negative relationship with the cardiorespiratory capacity (VO2 max; r = -0.75) and performance parameters (r = -0.75 for velocity, and r = -0.67 for time to exhaustion). The findings from this study provide evidence that fitness level is a major determinant of Tosm response to maximal incremental physical effort, showing a fairly linear association with several indices related to fitness level. High fitness level seems to be beneficial to avoid Tosm changes as consequence of intense exercise. Copyright © 2017 Elsevier Inc. All rights reserved.

Quantum independent increment processes

CERN Document Server

Franz, Uwe

2006-01-01

This is the second of two volumes containing the revised and completed notes of lectures given at the school "Quantum Independent Increment Processes: Structure and Applications to Physics". This school was held at the Alfried-Krupp-Wissenschaftskolleg in Greifswald in March, 2003, and supported by the Volkswagen Foundation. The school gave an introduction to current research on quantum independent increment processes aimed at graduate students and non-specialists working in classical and quantum probability, operator algebras, and mathematical physics. The present second volume contains the following lectures: "Random Walks on Finite Quantum Groups" by Uwe Franz and Rolf Gohm, "Quantum Markov Processes and Applications in Physics" by Burkhard Kümmerer, Classical and Free Infinite Divisibility and Lévy Processes" by Ole E. Barndorff-Nielsen, Steen Thorbjornsen, and "Lévy Processes on Quantum Groups and Dual Groups" by Uwe Franz.

First UHF Implementation of the Incremental Scheme for Open-Shell Systems.

Science.gov (United States)

Anacker, Tony; Tew, David P; Friedrich, Joachim

2016-01-12

The incremental scheme makes it possible to compute CCSD(T) correlation energies to high accuracy for large systems. We present the first extension of this fully automated black-box approach to open-shell systems using an Unrestricted Hartree-Fock (UHF) wave function, extending the efficient domain-specific basis set approach to handle open-shell references. We test our approach on a set of organic and metal organic structures and molecular clusters and demonstrate standard deviations from canonical CCSD(T) values of only 1.35 kJ/mol using a triple ζ basis set. We find that the incremental scheme is significantly more cost-effective than the canonical implementation even for relatively small systems and that the ease of parallelization makes it possible to perform high-level calculations on large systems in a few hours on inexpensive computers. We show that the approximations that make our approach widely applicable are significantly smaller than both the basis set incompleteness error and the intrinsic error of the CCSD(T) method, and we further demonstrate that incremental energies can be reliably used in extrapolation schemes to obtain near complete basis set limit CCSD(T) reaction energies for large systems.

Influence of increment thickness on dentin bond strength and light transmission of composite base materials.

Science.gov (United States)

Omran, Tarek A; Garoushi, Sufyan; Abdulmajeed, Aous A; Lassila, Lippo V; Vallittu, Pekka K

2017-06-01

Bulk-fill resin composites (BFCs) are gaining popularity in restorative dentistry due to the reduced chair time and ease of application. This study aimed to evaluate the influence of increment thickness on dentin bond strength and light transmission of different BFCs and a new discontinuous fiber-reinforced composite. One hundred eighty extracted sound human molars were prepared for a shear bond strength (SBS) test. The teeth were divided into four groups (n = 45) according to the resin composite used: regular particulate filler resin composite: (1) G-ænial Anterior [GA] (control); bulk-fill resin composites: (2) Tetric EvoCeram Bulk Fill [TEBF] and (3) SDR; and discontinuous fiber-reinforced composite: (4) everX Posterior [EXP]. Each group was subdivided according to increment thickness (2, 4, and 6 mm). The irradiance power through the material of all groups/subgroups was quantified (MARC® Resin Calibrator; BlueLight Analytics Inc.). Data were analyzed using two-way ANOVA followed by Tukey's post hoc test. SBS and light irradiance decreased as the increment's height increased (p composite used. EXP presented the highest SBS in 2- and 4-mm-thick increments when compared to other composites, although the differences were not statistically significant (p > 0.05). Light irradiance mean values arranged in descending order were (p composites. Discontinuous fiber-reinforced composite showed the highest value of curing light transmission, which was also seen in improved bonding strength to the underlying dentin surface. Discontinuous fiber-reinforced composite can be applied safely in bulks of 4-mm increments same as other bulk-fill composites, although, in 2-mm thickness, the investigated composites showed better performance.

Incremental-hinge piping analysis methods for inelastic seismic response prediction

International Nuclear Information System (INIS)

Jaquay, K.R.; Castle, W.R.; Larson, J.E.

1989-01-01

This paper proposes nonlinear seismic response prediction methods for nuclear piping systems based on simplified plastic hinge analyses. The simplified plastic hinge analyses utilize an incremental series of flat response spectrum loadings and replace yielded components with hinge elements when a predefined hinge moment is reached. These hinge moment values, developed by Rodabaugh, result in inelastic energy dissipation of the same magnitude as observed in seismic tests of piping components. Two definitions of design level equivalent loads are employed: one conservatively based on the peaks of the design acceleration response spectra, the other based on inelastic frequencies determined by the method of Krylov and Bogolyuboff recently extended by Lazzeri to piping. Both definitions account for piping system inelastic energy dissipation using Newmark-Hall inelastic response spectrum reduction factors and the displacement ductility results of the incremental-hinge analysis. Two ratchet-fatigue damage models are used: one developed by Rodabaugh that conservatively correlates Markl static fatigue expressions to seismic tests to failure of piping components; the other developed by Severud that uses the ratchet expression of Bree for elbows and Edmunds and Beer for straights, and defines ratchet-fatigue interaction using Coffin's ductility based fatigue equation. Comparisons of predicted behavior versus experimental results are provided for a high-level seismic test of a segment of a representative nuclear plant piping system. (orig.)

Growth increments in teeth of Diictodon (Therapsida

Directory of Open Access Journals (Sweden)

J. Francis Thackeray

1991-09-01

Full Text Available Growth increments circa 0.02 mm in width have been observed in sectioned tusks of Diictodon from the Late Permian lower Beaufort succession of the South African Karoo, dated between about 260 and 245 million years ago. Mean growth increments show a decline from relatively high values in the Tropidostoma/Endothiodon Assemblage Zone, to lower values in the Aulacephalodon/Cistecephaluszone, declining still further in the Dicynodon lacerficeps/Whaitsia zone at the end of the Permian. These changes coincide with gradual changes in carbon isotope ratios measured from Diictodon tooth apatite. It is suggested that the decline in growth increments is related to environmental changes associated with a decline in primary production which contributed to the decline in abundance and ultimate extinction of Diictodon.

A implantação do currículo baseado em competência na graduação de fisioterapia: a integralidade como eixo condutor

Directory of Open Access Journals (Sweden)

Camila Sotello Raymundo

2015-12-01

Full Text Available Introdução: Na busca de um novo perfil para o fisioterapeuta, há a necessidade de reformular a formação de profissionais fisioterapeutas que atendam a uma nova demanda. Este estudo busca apoiar‑se nas premissas da interdisciplinaridade na organização dos conhecimentos e o desenvolvimento de práticas e ações que buscam a integralidade na atenção a saúde entre os docentes do curso de graduação de fisioterapia de uma Universidade Privada e Internacional aqui estudada, por meio de um currículo baseado em competências. Objetivo: Identificar as dificuldades e as facilidades da implantação de um currículo por competências no curso de Fisioterapia, orientado pela Integralidade. Métodos: Neste percurso, utilizamos como método a Pesquisa‑Ação, como estratégia para a investigação da eficácia da implantação do currículo integrado e os atores envolvidos foi o corpo docente. Resultados: Durante o processo de implantação do currículo foi possível entender que um currículo baseado por competências é flexível, permite mudanças, de acordo com as necessidades atuais. Conclusão: Conclui‑se que um currículo integrado permite sempre novas inserções, com possibilidade de ouvir e empoderar os docentes neste processo, que são essenciais para o sucesso na implantação de um currículo baseado em cometências.

Design of methodology for incremental compiler construction

Directory of Open Access Journals (Sweden)

Pavel Haluza

2011-01-01

Full Text Available The paper deals with possibilities of the incremental compiler construction. It represents the compiler construction possibilities for languages with a fixed set of lexical units and for languages with a variable set of lexical units, too. The methodology design for the incremental compiler construction is based on the known algorithms for standard compiler construction and derived for both groups of languages. Under the group of languages with a fixed set of lexical units there belong languages, where each lexical unit has its constant meaning, e.g., common programming languages. For this group of languages the paper tries to solve the problem of the incremental semantic analysis, which is based on incremental parsing. In the group of languages with a variable set of lexical units (e.g., professional typographic system TEX, it is possible to change arbitrarily the meaning of each character on the input file at any time during processing. The change takes effect immediately and its validity can be somehow limited or is given by the end of the input. For this group of languages this paper tries to solve the problem case when we use macros temporarily changing the category of arbitrary characters.

Assessment of Heart Rate Variability Thresholds from Incremental Treadmill Tests in Five Cross-Country Skiing Techniques.

Directory of Open Access Journals (Sweden)

Ibai Mendia-Iztueta

Full Text Available The assessment of heart rate variability (HRV thresholds (HRVTs as an alternative of Ventilatory thresholds (VTs is a relatively new approach with increasing popularity which has not been conducted in cross-country (XC skiing yet. The main purpose of the present study was to assess HRVTs in the five main XC skiing-related techniques, double poling (DP, diagonal striding (DS, Nordic walking (NW, V1 skating (V1, and V2 skating (V2.Ten competitive skiers completed these incremental treadmill tests until exhaustion with a minimum of one to two recovery days in between each test. Ventilatory gases, HRV and poling frequencies were measured. The first HRV threshold (HRVT1 was assessed using two time-domain analysis methods, and the second HRV threshold (HRVT2 was assessed using two non-time varying frequency-domain analysis methods. HRVT1 was assessed by plotting the mean successive difference (MSD and standard deviation (SD of normalized R-R intervals to workload. HRVT1 was assessed by plotting high frequency power (HFP and the HFP relative to respiratory sinus arrhythmia (HFPRSA with workload. HRVTs were named after their methods (HRVT1-SD; HRVT1-MSD; HRVT2-HFP; HRVT2-HFP-RSA. The results showed that the only cases where the proposed HRVTs were good assessors of VTs were the HRVT1-SD of the DS test, the HRVT1-MSD of the DS and V2 tests, and the HRVT2-HFP-RSA of the NW test. The lack of a wider success of the assessment of HRVTs was reasoned to be mostly due to the high entrainment between the breathing and poling frequencies. As secondary finding, a novel Cardiolocomotor coupling mode was observed in the NW test. This new Cardiolocoomtor coupling mode corresponded to the whole bilateral poling cycle instead of corresponding to each poling action as it was reported to the date by the existing literature.

21 CFR 874.1070 - Short increment sensitivity index (SISI) adapter.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Short increment sensitivity index (SISI) adapter. 874.1070 Section 874.1070 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... increment sensitivity index (SISI) adapter. (a) Identification. A short increment sensitivity index (SISI...

A Syntactic-Semantic Approach to Incremental Verification

OpenAIRE

Bianculli, Domenico; Filieri, Antonio; Ghezzi, Carlo; Mandrioli, Dino

2013-01-01

Software verification of evolving systems is challenging mainstream methodologies and tools. Formal verification techniques often conflict with the time constraints imposed by change management practices for evolving systems. Since changes in these systems are often local to restricted parts, an incremental verification approach could be beneficial. This paper introduces SiDECAR, a general framework for the definition of verification procedures, which are made incremental by the framework...

AGRUPAMENTO DE FUNCIONÁRIOS BASEADO NO BIG FIVE MODEL EM UM PROJETO DE FRANQUIA DE ACADEMIAS

Directory of Open Access Journals (Sweden)

Michel Anzanello

2016-12-01

Full Text Available O aumento da concorrência especificamente no setor de serviços faz com que as empresas procurem melhores práticas gerenciais. Nesse contexto, técnicas de clusterização vêm ganhando espaço para identificar ações que se adequem melhor aos perfis dos colaboradores. Além disso, técnicas da Psicologia Pessoal, especialmente a área de análise de personalidade tem ampla aplicação em estudos e empresas. O presente artigo aborda a clusterização por k-means e Fuzzy C-Means, avaliados através do Silhouette Index (SI, além da análise de componentes principais das amostras em uma loja de um projeto de franquia de academia. As amostras foram caracterizadas tanto por características sócio-demográficas e sua relação com a empresa, bem como seus escores nos testes de personalidade baseados no FFM. Os resultados indicam a formação dois grupos que se diferenciam especialmente em idade, tempo de empresa, salário e cargo, além de acompanhar os maiores escores no FFM. Os clusters formados foram analisados gerencialmente, possibilitando a proposição de ações para cada grupo.

Shredder: GPU-Accelerated Incremental Storage and Computation

OpenAIRE

Bhatotia, Pramod; Rodrigues, Rodrigo; Verma, Akshat

2012-01-01

Redundancy elimination using data deduplication and incremental data processing has emerged as an important technique to minimize storage and computation requirements in data center computing. In this paper, we present the design, implementation and evaluation of Shredder, a high performance content-based chunking framework for supporting incremental storage and computation systems. Shredder exploits the massively parallel processing power of GPUs to overcome the CPU bottlenecks of content-ba...

Incremental Validity of the WJ III COG: Limited Predictive Effects beyond the GIA-E

Science.gov (United States)

McGill, Ryan J.; Busse, R. T.

2015-01-01

This study is an examination of the incremental validity of Cattell-Horn-Carroll (CHC) broad clusters from the Woodcock-Johnson III Tests of Cognitive Abilities (WJ III COG) for predicting scores on the Woodcock-Johnson III Tests of Achievement (WJ III ACH). The participants were children and adolescents, ages 6-18 (n = 4,722), drawn from the WJ…

A fast implementation of the incremental backprojection algorithms for parallel beam geometries

International Nuclear Information System (INIS)

Chen, C.M.; Wang, C.Y.; Cho, Z.H.

1996-01-01

Filtered-backprojection algorithms are the most widely used approaches for reconstruction of computed tomographic (CT) images, such as X-ray CT and positron emission tomographic (PET) images. The Incremental backprojection algorithm is a fast backprojection approach based on restructuring the Shepp and Logan algorithm. By exploiting interdependency (position and values) of adjacent pixels, the Incremental algorithm requires only O(N) and O(N 2 ) multiplications in contrast to O(N 2 ) and O(N 3 ) multiplications for the Shepp and Logan algorithm in two-dimensional (2-D) and three-dimensional (3-D) backprojections, respectively, for each view, where N is the size of the image in each dimension. In addition, it may reduce the number of additions for each pixel computation. The improvement achieved by the Incremental algorithm in practice was not, however, as significant as expected. One of the main reasons is due to inevitably visiting pixels outside the beam in the searching flow scheme originally developed for the Incremental algorithm. To optimize implementation of the Incremental algorithm, an efficient scheme, namely, coded searching flow scheme, is proposed in this paper to minimize the overhead caused by searching for all pixels in a beam. The key idea of this scheme is to encode the searching flow for all pixels inside each beam. While backprojecting, all pixels may be visited without any overhead due to using the coded searching flow as the a priori information. The proposed coded searching flow scheme has been implemented on a Sun Sparc 10 and a Sun Sparc 20 workstations. The implementation results show that the proposed scheme is 1.45--2.0 times faster than the original searching flow scheme for most cases tested

Proposta de um sistema de gestão de estresse para médicos em hospitais baseado na OHSAS

OpenAIRE

Santos, Cidalia de Lourdes de Moura

2008-01-01

Esta pesquisa teve por objetivo o desenvolvimento de um modelo de gestão de estresse para médicos em hospitais baseado nas diretrizes propostas pela OHSAS 18001:2007. Com o advento da globalização e da competitividade, o trabalho tornouse mais estressante e as doenças decorrentes do estresse se fizeram mais presentes. O estresse é uma reação fisiológica do corpo, portanto, necessária à vida. O estresse quando em equilíbrio traz benefícios para o indivíduo e é chamado de eust...

Simulation and comparison of perturb and observe and incremental ...

Indian Academy of Sciences (India)

Perturb and Observe (P & O) algorithm and Incremental conductance algorithm. ... Keywords. Solar array; insolation; MPPT; modelling, P & O; incremental conductance. 1. .... voltage level. It is also ..... Int. J. Advances in Eng. Technol. 133–148.

Efficient incremental relaying

KAUST Repository

Fareed, Muhammad Mehboob

2013-07-01

We propose a novel relaying scheme which improves the spectral efficiency of cooperative diversity systems by utilizing limited feedback from destination. Our scheme capitalizes on the fact that relaying is only required when direct transmission suffers deep fading. We calculate the packet error rate for the proposed efficient incremental relaying scheme with both amplify and forward and decode and forward relaying. Numerical results are also presented to verify their analytical counterparts. © 2013 IEEE.

Nova proposta de teste incremental de remada na avaliação aeróbia de surfistas

Directory of Open Access Journals (Sweden)

Felipe Bercht CANOZZI

2015-09-01

Full Text Available ResumoOs objetivos desse estudo foram: 1 verificar as respostas do lactato sanguíneo e da frequência cardíaca (FC durante um protocolo de campo específico de remada no surfe; 2 correlacionar os índices de capacidade e potência aeróbia determinados nesse protocolo específico com o tempo de prática da modalidade e variáveis antropométricas. Participaram deste estudo nove sujeitos (24 ± 4,5 anos; 72,2 ± 6,7 kg; 178,4 ± 4,8 cm que foram submetidos a um teste progressivo intermitente de remada sobre a sua própria prancha de surfe, do tipo vai e vêm, com velocidades iniciais entre 1-1,1 m/s e incrementos de 0,05 m/s a cada 3 min até a exaustão voluntária. Uma resposta linear e exponencial foram observadas para a FC e o lactato sanguíneo, respectivamente, durante o protocolo incremental. Este comportamento foi semelhante ao demonstrado durante protocolos incrementais com objetivo de avaliar a capacidade e a potência aeróbia realizados em outras modalidades cíclicas. Além disso, foram encontradas correlações significantes entre o pico de velocidade (PV e a velocidade correspondente ao início do acúmulo de lactato no sangue (vOBLA (r = 0,87, p = 0,005 e do PV com tempo de prática de surfe (r = 0,70, p = 0,03. No entanto, não foram encontradas correlações significativas entre PV e vOBLA com nenhuma das variáveis antropométricas mensuradas. Assim, podemos concluir que o protocolo incremental específico de remada no surfe utilizado no presente estudo poderia ser uma ferramenta útil na determinação de índices relacionados à capacidade (vOBLA e potência (PV aeróbia de surfistas.

Responsiveness of the Countermovement Jump and Handgrip Strength to an Incremental Running Test in Endurance Athletes: Influence of Sex.

Science.gov (United States)

García-Pinillos, Felipe; Delgado-Floody, Pedro; Martínez-Salazar, Cristian; Latorre-Román, Pedro Á

2018-03-01

The present study analyzed the acute effects of an incremental running test on countermovement jump (CMJ) and handgrip strength performance in endurance athletes, considering the effect of post-exercise recovery time and sex. Thirty-three recreationally trained long-distance runners, 20 men and 13 women, participated voluntarily in this study. The participants performed the Léger test, moreover, the CMJ and handgrip strength tests were carried out before and after the running test and during different stages of recovery (at the 1st min of recovery (posttest1), 5th min of recovery (posttest2), and 10th min of recovery (posttest3)). Two-way analysis of variance revealed a significant improvement in the CMJ (pre-posttest1, p = 0.001) and handgrip strength (pre-posttest2, p = 0.017) during recovery time. The Pearson's Chi-2 test showed no significant relationship ( p ≥ 0.05) between sex and post-activation potentiation (PAP). A linear regression analysis pointed to heart rate recovery as a predictive factor of CMJ improvement (PAP). In conclusion, despite significant fatigue reached during the Léger test, the long-distance runners did not experience an impaired CMJ and handgrip strength performance, either men or women, achieving an improvement (PAP) in posttest conditions. The results obtained showed no significant relationship between sex and PAP. Moreover, significant effect of recovery after running at high intensity on CMJ performance and handgrip strength was found. Finally, the data suggest that PAP condition can be predicted by heart rate recovery in endurance runners.

Association between the occurrence of falls and the performance on the Incremental Shuttle Walk Test in elderly women Associação entre a ocorrência de quedas e o desempenho no Incremental Shuttle Walk Test em mulheres idosas

Directory of Open Access Journals (Sweden)

Marcela G. Bardin

2012-08-01

Full Text Available BACKGROUND: Because the incremental shuttle walk test (ISWT requires agility in its performance, we hypothesized that the test may be associated with balance and risk of falls in the elderly. Objective: To evaluate and compare the association between the performance on the ISWT, the timed up and go (TUG and the occurrence of falls in the elderly. METHOD: Thirty-three elderly individuals (68±7 years performed the TUG and the ISWT. Balance was assessed using the Berg Scale (BBS. Participants who fell at least twice in the last 12 months were placed in the "falls" group (FG and all other participants comprised the control group (CG. RESULTS: There were seventeen elderly women in the FG and 16 in the CG. Participants from the FG had a significant worse performance (pCONTEXTUALIZAÇÃO: Levantamos a hipótese de que o Incremental Shuttle Walk Test (ISWT, por exigir agilidade do examinado, possa estar associado ao equilíbrio e ao risco de quedas em idosos. OBJETIVOS: Avaliar e comparar as associações entre os desempenhos no ISWT e no Timed Up and Go (TUG e a ocorrência de quedas em idosos. MÉTODO: Trinta e três idosas (68±7 anos realizaram o ISWT e o TUG. O equilíbrio foi avaliado pela Escala de Equilíbrio de Berg (EEB. As participantes que caíram, pelo menos, duas vezes nos últimos 12 meses foram alocadas no grupo "quedas" (GQ, e as demais compuseram o grupo controle (GC. RESULTADOS: O GQ foi composto por 17 idosas, e 16 compuseram o GC. O GQ apresentou pior desempenho (p<0,05 no TUG (8,01±0,22 vs. 6,22±0,21 s, na EEB (51±3 vs. 55±1 pontos e no ISWT [313±79 (92±15%prev. vs. 395±75 m (113±19%prev.]. A distância percorrida no ISWT correlacionou-se com o TUG (r=-0,75; p<0,001, com a EEB (r=0,50; p=0,002 e com o número de quedas (r=0,36; p=0,031. Após regressão logística, o TUG foi determinante (p=0,03, e a ISWT mostrou tendência para determinar a ocorrência de quedas (p=0,05. CONCLUSÃO: O ISWT foi válido para avaliar o risco

Entity versus incremental theories predict older adults' memory performance.

Science.gov (United States)

Plaks, Jason E; Chasteen, Alison L

2013-12-01

The authors examined whether older adults' implicit theories regarding the modifiability of memory in particular (Studies 1 and 3) and abilities in general (Study 2) would predict memory performance. In Study 1, individual differences in older adults' endorsement of the "entity theory" (a belief that one's ability is fixed) or "incremental theory" (a belief that one's ability is malleable) of memory were measured using a version of the Implicit Theories Measure (Dweck, 1999). Memory performance was assessed with a free-recall task. Results indicated that the higher the endorsement of the incremental theory, the better the free recall. In Study 2, older and younger adults' theories were measured using a more general version of the Implicit Theories Measure that focused on the modifiability of abilities in general. Again, for older adults, the higher the incremental endorsement, the better the free recall. Moreover, as predicted, implicit theories did not predict younger adults' memory performance. In Study 3, participants read mock news articles reporting evidence in favor of either the entity or incremental theory. Those in the incremental condition outperformed those in the entity condition on reading span and free-recall tasks. These effects were mediated by pretask worry such that, for those in the entity condition, higher worry was associated with lower performance. Taken together, these studies suggest that variation in entity versus incremental endorsement represents a key predictor of older adults' memory performance. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Lifetime costs of lung transplantation : Estimation of incremental costs

NARCIS (Netherlands)

VanEnckevort, PJ; Koopmanschap, MA; Tenvergert, EM; VanderBij, W; Rutten, FFH

1997-01-01

Despite an expanding number of centres which provide lung transplantation, information about the incremental costs of lung transplantation is scarce. From 1991 until 1995, in The Netherlands a technology assessment was performed which provided information about the incremental costs of lung

Biometrics Enabling Capability Increment 1 (BEC Inc 1)

Science.gov (United States)

2016-03-01

modal biometrics submissions to include iris, face, palm and finger prints from biometrics collection devices, which will support the Warfighter in...2016 Major Automated Information System Annual Report Biometrics Enabling Capability Increment 1 (BEC Inc 1) Defense Acquisition Management...Phone: 227-3119 DSN Fax: Date Assigned: July 15, 2015 Program Information Program Name Biometrics Enabling Capability Increment 1 (BEC Inc 1) DoD

76 FR 53763 - Immigration Benefits Business Transformation, Increment I

Science.gov (United States)

2011-08-29

..., 100, et al. Immigration Benefits Business Transformation, Increment I; Final Rule #0;#0;Federal... Benefits Business Transformation, Increment I AGENCY: U.S. Citizenship and Immigration Services, DHS... USCIS is engaged in an enterprise-wide transformation effort to implement new business processes and to...

Shakedown analysis by finite element incremental procedures

International Nuclear Information System (INIS)

Borkowski, A.; Kleiber, M.

1979-01-01

It is a common occurence in many practical problems that external loads are variable and the exact time-dependent history of loading is unknown. Instead of it load is characterized by a given loading domain: a convex polyhedron in the n-dimensional space of load parameters. The problem is then to check whether a structure shakes down, i.e. responds elastically after a few elasto-plastic cycles, or not to a variable loading as defined above. Such check can be performed by an incremental procedure. One should reproduce incrementally a simple cyclic process which consists of proportional load paths that connect the origin of the load space with the corners of the loading domain. It was proved that if a structure shakes down to such loading history then it is able to adopt itself to an arbitrary load path contained in the loading domain. The main advantage of such approach is the possibility to use existing incremental finite-element computer codes. (orig.)

Automating the Incremental Evolution of Controllers for Physical Robots

DEFF Research Database (Denmark)

Faina, Andres; Jacobsen, Lars Toft; Risi, Sebastian

2017-01-01

the evolution of digital objects.…” The work presented here investigates how fully autonomous evolution of robot controllers can be realized in hardware, using an industrial robot and a marker-based computer vision system. In particular, this article presents an approach to automate the reconfiguration...... of the test environment and shows that it is possible, for the first time, to incrementally evolve a neural robot controller for different obstacle avoidance tasks with no human intervention. Importantly, the system offers a high level of robustness and precision that could potentially open up the range...

Automatic incrementalization of Prolog based static analyses

DEFF Research Database (Denmark)

Eichberg, Michael; Kahl, Matthias; Saha, Diptikalyan

2007-01-01

Modem development environments integrate various static analyses into the build process. Analyses that analyze the whole project whenever the project changes are impractical in this context. We present an approach to automatic incrementalization of analyses that are specified as tabled logic...... programs and evaluated using incremental tabled evaluation, a technique for efficiently updating memo tables in response to changes in facts and rules. The approach has been implemented and integrated into the Eclipse IDE. Our measurements show that this technique is effective for automatically...

Monitoramento não invasivo baseado na biorreatância revela instabilidade hemodinâmica significativa durante cesárea eletiva sob raquianestesia

Directory of Open Access Journals (Sweden)

Anne Doherty

2011-06-01

Full Text Available JUSTIFICATIVA E OBJETIVOS: O monitoramento da pressão arterial oferece uma compreensão limitada das consequências hemodinâmicas da raquianestesia para cesariana. O objetivo deste estudo foi avaliar, com o auxílio do monitor de débito cardíaco não invasivo baseado na biorreatância, as alterações hemodinâmicas durante cesariana eletiva sob raquianestesia, na qual doses intermitentes de fenilefrina foram utilizados para prevenir e tratar a hipotensão. MÉTODOS: Este estudo observacional foi realizado após aprovação da comissão de ética na pesquisa e assinatura do consentimento informado. Pacientes saudáveis marcadas para cesariana eletiva sob raquianestesia foram avaliadas. Doses intermitentes de fenilefrina foram administrados para manter a pressão arterial sistólica nos níveis basais e as pacientes foram avaliadas com o monitor de débito cardíaco não invasivo baseado na biorreatância. Os dados hemodinâmicos foram colhidos continuamente no momento basal e durante os períodos pós-raquianestesia e pós-nascimento do feto. Os dados foram analisados usando ANOVA para modelos mistos e um p < 0,05 foi considerado significativo. RESULTADOS: A pressão arterial sistólica foi mantida entre 79,2% ± 14,2 e 105,9% ± 10,0 dos valores basais durante o período pós-raquianestesia e 78,4% ± 11,13 e 100,9% ± 10,7 dos valores basais no período pós-nascimento do feto (média ± DP. Flutuações significativas foram observadas na pressão arterial sistólica, frequência cardíaca e débito cardíaco no período pós-nascimento. CONCLUSÕES: Um novo monitor não invasivo, baseado na biorreatância, revelou flutuações hemodinâmicas significativas durante a cesariana sob raquianestesia, a despeito das tentativas de manter a pressão arterial nos níveis basais com doses intermitentes de fenilefrina.

Simulação de movimentos para o membro superior humano baseado nas forças aplicadas pelos músculos

OpenAIRE

Marques, Marlene Ferreira

2005-01-01

A modelagem e simulação computacional do movimento e da postura de seres humanos vem sendo empregados há muitos anos na medicina e fisioterapia em vários aspectos tais como, auxílio em cirurgias, reabilitação de deficientes físicos, bem como em muitas outras atividades desempenhadas por profissionais da área de saúde. Entretanto, a maioria dos sistemas baseados nesta tecnologia nção apresentam carac- terísticas primordiais ao treinamento de uso de próteses, como exemplo simulação de mov...

MRI: Modular reasoning about interference in incremental programming

OpenAIRE

Oliveira, Bruno C. D. S; Schrijvers, Tom; Cook, William R

2012-01-01

Incremental Programming (IP) is a programming style in which new program components are defined as increments of other components. Examples of IP mechanisms include: Object-oriented programming (OOP) inheritance, aspect-oriented programming (AOP) advice and feature-oriented programming (FOP). A characteristic of IP mechanisms is that, while individual components can be independently defined, the composition of components makes those components become tightly coupled, sh...

Incremental short daily home hemodialysis: a case series

OpenAIRE

Toth-Manikowski, Stephanie M.; Mullangi, Surekha; Hwang, Seungyoung; Shafi, Tariq

2017-01-01

Background Patients starting dialysis often have substantial residual kidney function. Incremental hemodialysis provides a hemodialysis prescription that supplements patients? residual kidney function while maintaining total (residual + dialysis) urea clearance (standard Kt/Vurea) targets. We describe our experience with incremental hemodialysis in patients using NxStage System One for home hemodialysis. Case presentation From 2011 to 2015, we initiated 5 incident hemodialysis patients on an ...

Volatilities, Traded Volumes, and Price Increments in Derivative Securities

Science.gov (United States)

Kim, Kyungsik; Lim, Gyuchang; Kim, Soo Yong; Scalas, Enrico

2007-03-01

We apply the detrended fluctuation analysis (DFA) to the statistics of the Korean treasury bond (KTB) futures from which the logarithmic increments, volatilities, and traded volumes are estimated over a specific time lag. For our case, the logarithmic increment of futures prices has no long-memory property, while the volatility and the traded volume exhibit the existence of long-memory property. To analyze and calculate whether the volatility clustering is due to the inherent higher-order correlation not detected by applying directly the DFA to logarithmic increments of the KTB futures, it is of importance to shuffle the original tick data of futures prices and to generate the geometric Brownian random walk with the same mean and standard deviation. It is really shown from comparing the three tick data that the higher-order correlation inherent in logarithmic increments makes the volatility clustering. Particularly, the result of the DFA on volatilities and traded volumes may be supported the hypothesis of price changes.

Space-time quantitative source apportionment of soil heavy metal concentration increments.

Science.gov (United States)

Yang, Yong; Christakos, George; Guo, Mingwu; Xiao, Lu; Huang, Wei

2017-04-01

Assessing the space-time trends and detecting the sources of heavy metal accumulation in soils have important consequences in the prevention and treatment of soil heavy metal pollution. In this study, we collected soil samples in the eastern part of the Qingshan district, Wuhan city, Hubei Province, China, during the period 2010-2014. The Cd, Cu, Pb and Zn concentrations in soils exhibited a significant accumulation during 2010-2014. The spatiotemporal Kriging technique, based on a quantitative characterization of soil heavy metal concentration variations in terms of non-separable variogram models, was employed to estimate the spatiotemporal soil heavy metal distribution in the study region. Our findings showed that the Cd, Cu, and Zn concentrations have an obvious incremental tendency from the southwestern to the central part of the study region. However, the Pb concentrations exhibited an obvious tendency from the northern part to the central part of the region. Then, spatial overlay analysis was used to obtain absolute and relative concentration increments of adjacent 1- or 5-year periods during 2010-2014. The spatial distribution of soil heavy metal concentration increments showed that the larger increments occurred in the center of the study region. Lastly, the principal component analysis combined with the multiple linear regression method were employed to quantify the source apportionment of the soil heavy metal concentration increments in the region. Our results led to the conclusion that the sources of soil heavy metal concentration increments should be ascribed to industry, agriculture and traffic. In particular, 82.5% of soil heavy metal concentration increment during 2010-2014 was ascribed to industrial/agricultural activities sources. Using STK and SOA to obtain the spatial distribution of heavy metal concentration increments in soils. Using PCA-MLR to quantify the source apportionment of soil heavy metal concentration increments. Copyright © 2017

Support vector machine incremental learning triggered by wrongly predicted samples

Science.gov (United States)

Tang, Ting-long; Guan, Qiu; Wu, Yi-rong

2018-05-01

According to the classic Karush-Kuhn-Tucker (KKT) theorem, at every step of incremental support vector machine (SVM) learning, the newly adding sample which violates the KKT conditions will be a new support vector (SV) and migrate the old samples between SV set and non-support vector (NSV) set, and at the same time the learning model should be updated based on the SVs. However, it is not exactly clear at this moment that which of the old samples would change between SVs and NSVs. Additionally, the learning model will be unnecessarily updated, which will not greatly increase its accuracy but decrease the training speed. Therefore, how to choose the new SVs from old sets during the incremental stages and when to process incremental steps will greatly influence the accuracy and efficiency of incremental SVM learning. In this work, a new algorithm is proposed to select candidate SVs and use the wrongly predicted sample to trigger the incremental processing simultaneously. Experimental results show that the proposed algorithm can achieve good performance with high efficiency, high speed and good accuracy.

Average-case analysis of incremental topological ordering

DEFF Research Database (Denmark)

Ajwani, Deepak; Friedrich, Tobias

2010-01-01

Many applications like pointer analysis and incremental compilation require maintaining a topological ordering of the nodes of a directed acyclic graph (DAG) under dynamic updates. All known algorithms for this problem are either only analyzed for worst-case insertion sequences or only evaluated...... experimentally on random DAGs. We present the first average-case analysis of incremental topological ordering algorithms. We prove an expected runtime of under insertion of the edges of a complete DAG in a random order for the algorithms of Alpern et al. (1990) [4], Katriel and Bodlaender (2006) [18], and Pearce...

Motion-Induced Blindness Using Increments and Decrements of Luminance

Directory of Open Access Journals (Sweden)

Stine Wm Wren

2017-10-01

Full Text Available Motion-induced blindness describes the disappearance of stationary elements of a scene when other, perhaps non-overlapping, elements of the scene are in motion. We measured the effects of increment (200.0 cd/m2 and decrement targets (15.0 cd/m2 and masks presented on a grey background (108.0 cd/m2, tapping into putative ON- and OFF-channels, on the rate of target disappearance psychophysically. We presented two-frame motion, which has coherent motion energy, and dynamic Glass patterns and dynamic anti-Glass patterns, which do not have coherent motion energy. Using the method of constant stimuli, participants viewed stimuli of varying durations (3.1 s, 4.6 s, 7.0 s, 11 s, or 16 s in a given trial and then indicated whether or not the targets vanished during that trial. Psychometric function midpoints were used to define absolute threshold mask duration for the disappearance of the target. 95% confidence intervals for threshold disappearance times were estimated using a bootstrap technique for each of the participants across two experiments. Decrement masks were more effective than increment masks with increment targets. Increment targets were easier to mask than decrement targets. Distinct mask pattern types had no effect, suggesting that perceived coherence contributes to the effectiveness of the mask. The ON/OFF dichotomy clearly carries its influence to the level of perceived motion coherence. Further, the asymmetry in the effects of increment and decrement masks on increment and decrement targets might lead one to speculate that they reflect the ‘importance’ of detecting decrements in the environment.

CATECHOLAMINES AND β2-ADRENOCEPTOR GENE EXPRESSION BEFORE AND AFTER MAXIMAL INCREMENTAL CYCLE TEST IN YOUNG ICE HOCKEY PLAYERS: RELATION TO WORK PERFORMED

Directory of Open Access Journals (Sweden)

Urszula Mazurek

2013-04-01

Full Text Available The aim of this study was to assess the plasma adrenaline and noradrenaline concentrations as well as whole blood β2-adrenoceptor gene (ADRB2 expression in young ice hockey players before and immediately after exercise in relation to performed work. Nineteen Youth National Team ice hockey players were subjected to the maximal incremental cycloergometer exercise. The test was done in the pre-competitive phase of training. Among many parameters the plasma adrenaline and noradrenaline concentrations and ADRB2 gene expression in peripheral blood mononuclear cells (PBMC were determined before and after exercise. The average performed work was 3261.3 ± 558.3 J · kg-1 and maximal oxygen consumption (VO2max for all players was 53.85 ± 3.91 mL · kg-1 min-1. The geometric mean of the ADRB2 gene expression was statistically significantly different before and after exercise (P ≤ 0.05, while adrenaline and noradrenaline levels in plasma significantly increased after exercise. In the analysed group of athletes we found that initial level of plasma noradrenaline correlated with the performed work (r = - 0.55, P < 0.014 and normalized ADRB2 expression before the exercise correlated with the work done by them (r = 0.48, P<0.039. However, no statistically significant correlations were found between the plasma adrenaline or noradrenaline concentrations and ADRB2 gene expression in peripheral blood of the players. The performed work in the maximal incremental exercise test of regularly training young ice hockey players depends on the initial levels of noradrenaline in plasma and ADRB2 mRNA in PBMC.

Logistics Modernization Program Increment 2 (LMP Inc 2)

Science.gov (United States)

2016-03-01

Sections 3 and 4 of the LMP Increment 2 Business Case, ADM), key functional requirements, Critical Design Review (CDR) Reports, and Economic ...from the 2013 version of the LMP Increment 2 Economic Analysis and replace it with references to the Economic Analysis that will be completed...of ( inbound /outbound) IDOCs into the system. LMP must be able to successfully process 95% of ( inbound /outbound) IDOCs into the system. Will meet

Incremental Tensor Principal Component Analysis for Handwritten Digit Recognition

Directory of Open Access Journals (Sweden)

Chang Liu

2014-01-01

Full Text Available To overcome the shortcomings of traditional dimensionality reduction algorithms, incremental tensor principal component analysis (ITPCA based on updated-SVD technique algorithm is proposed in this paper. This paper proves the relationship between PCA, 2DPCA, MPCA, and the graph embedding framework theoretically and derives the incremental learning procedure to add single sample and multiple samples in detail. The experiments on handwritten digit recognition have demonstrated that ITPCA has achieved better recognition performance than that of vector-based principal component analysis (PCA, incremental principal component analysis (IPCA, and multilinear principal component analysis (MPCA algorithms. At the same time, ITPCA also has lower time and space complexity.

Ductility, strength and hardness relation after prior incremental deformation (ratcheting) of austenitic steel

International Nuclear Information System (INIS)

Kussmaul, K.; Diem, H.K.; Wachter, O.

1993-01-01

Experimental investigations into the stress/strain behavior of the niobium stabilized austenitic material with the German notation X6 CrNiNb 18 10 proved that a limited incrementally applied prior deformation will reduce the total deformation capability only by the amount of the prior deformation. It could especially be determined on the little changes in the reduction of area that the basically ductile deformation behavior will not be changed by the type of the prior loading. There is a correlation between the amount of deformation and the increase in hardness. It is possible to correlate both the changes in hardness and the material properties. In the case of low cycle fatigue tests with alternating temperature an incremental increase in total strain (ratcheting) was noted to depend on the strain range applied

Creating Helical Tool Paths for Single Point Incremental Forming

DEFF Research Database (Denmark)

Skjødt, Martin; Hancock, Michael H.; Bay, Niels

2007-01-01

Single point incremental forming (SPIF) is a relatively new sheet forming process. A sheet is clamped in a rig and formed incrementally using a rotating single point tool in the form of a rod with a spherical end. The process is often performed on a CNC milling machine and the tool movement...

Incremental Learning for Place Recognition in Dynamic Environments

OpenAIRE

Luo, Jie; Pronobis, Andrzej; Caputo, Barbara; Jensfelt, Patric

2007-01-01

This paper proposes a discriminative approach to template-based Vision-based place recognition is a desirable feature for an autonomous mobile system. In order to work in realistic scenarios, visual recognition algorithms should be adaptive, i.e. should be able to learn from experience and adapt continuously to changes in the environment. This paper presents a discriminative incremental learning approach to place recognition. We use a recently introduced version of the incremental SVM, which ...

On the instability increments of a stationary pinch

International Nuclear Information System (INIS)

Bud'ko, A.B.

1989-01-01

The stability of stationary pinch to helical modes is numerically studied. It is shown that in the case of a rather fast plasma pressure decrease to the pinch boundary, for example, for an isothermal diffusion pinch with Gauss density distribution instabilities with m=0 modes are the most quickly growing. Instability increments are calculated. A simple analytical expression of a maximum increment of growth of sausage instability for automodel Gauss profiles is obtained

Incremental Trust in Grid Computing

DEFF Research Database (Denmark)

Brinkløv, Michael Hvalsøe; Sharp, Robin

2007-01-01

This paper describes a comparative simulation study of some incremental trust and reputation algorithms for handling behavioural trust in large distributed systems. Two types of reputation algorithm (based on discrete and Bayesian evaluation of ratings) and two ways of combining direct trust and ...... of Grid computing systems....

Convergent systems vs. incremental stability

NARCIS (Netherlands)

Rüffer, B.S.; Wouw, van de N.; Mueller, M.

2013-01-01

Two similar stability notions are considered; one is the long established notion of convergent systems, the other is the younger notion of incremental stability. Both notions require that any two solutions of a system converge to each other. Yet these stability concepts are different, in the sense

A global, incremental development method for a web-based prostate cancer treatment decision aid and usability testing in a Dutch clinical setting.

Science.gov (United States)

Cuypers, Maarten; Lamers, Romy Ed; Kil, Paul Jm; The, Regina; Karssen, Klemens; van de Poll-Franse, Lonneke V; de Vries, Marieke

2017-07-01

Many new decision aids are developed while aspects of existing decision aids could also be useful, leading to a sub-optimal use of resources. To support treatment decision-making in prostate cancer patients, a pre-existing evidence-based Canadian decision aid was adjusted to Dutch clinical setting. After analyses of the original decision aid and routines in Dutch prostate cancer care, adjustments to the decision aid structure and content were made. Subsequent usability testing (N = 11) resulted in 212 comments. Care providers mainly provided feedback on medical content, and patients commented most on usability and summary layout. All participants reported that the decision aid was comprehensible and well-structured and would recommend decision aid use. After usability testing, final adjustments to the decision aid were made. The presented methods could be useful for cultural adaptation of pre-existing tools into other languages and settings, ensuring optimal usage of previous scientific and practical efforts and allowing for a global, incremental decision aid development process.

The Incremental Information Content of the Cash Flow Statement: An Australian Empirical Investigation

OpenAIRE

Hadri Kusuma

2014-01-01

The general objective of the present study is to investigate and assess the incremental information content of cash flow disclosures as required by the AASB 1026 ¡°Statement of Cash Flows¡±. This test addresses the issue of whether a change in cash flow components has the same relationship with security prices as that in earnings. Several previous studies indicate both income and cash flow statements may be mutually exclusive or mutually inclusive statements. The data to test three hypotheses...

Making context explicit for explanation and incremental knowledge acquisition

Energy Technology Data Exchange (ETDEWEB)

Brezillon, P. [Univ. Paris (France)

1996-12-31

Intelligent systems may be improved by making context explicit in problem solving. This is a lesson drawn from a study of the reasons why a number of knowledge-based systems (KBSs) failed. We discuss the interest to make context explicit in explanation generation and incremental knowledge acquisition, two important aspects of intelligent systems that aim to cooperate with users. We show how context can be used to better explain and incrementally acquire knowledge. The advantages of using context in explanation and incremental knowledge acquisition are discussed through SEPIT, an expert system for supporting diagnosis and explanation through simulation of power plants. We point out how the limitations of such systems may be overcome by making context explicit.

Modelagem de um sistema para apoio à tomada de decisão com uso de técnicas de raciocínio baseado em casos

Directory of Open Access Journals (Sweden)

Liane Mahlmann Kipper

2014-06-01

Full Text Available Este artigo apresenta o processo de desenvolvimento de um sistema de gestão do conhecimento para apoio à tomada de decisões percorrendo os temas que abordam o conhecimento, seu capital intelectual, as estratégias utilizadas nas empresas e o uso de um sistema que utiliza técnicas de raciocínio baseado em casos. A Inteligência Artificial através da técnica de Raciocínio Baseado em Casos (RBC foi utilizada atendendo o desafio da Empresa de tornar o conhecimento parte da sua cultura. A proposta desenvolvida foi aplicada no setor comercial da Empresa. Esta ação proporcionou à empresa análises detalhadas dos resultados, auxiliando os gestores na tomada das decisões estratégicas. Três ferramentas foram criadas e adaptadas, para tornar esta aplicação possível e diferenciada, que são: linear da faixa de interesse para cada atributo, elaboração de uma matriz simétrica de similaridade e tabela de definição dos valores por atributos. Isto possibilitou melhoria significativa na acurácia das informações em tempo real, auxiliando na tomada de decisões e gerando resultados eficazes.

Retificadores trifásicos com fator de potência unitário baseados nos transformadores trifásicos/bifásicos

OpenAIRE

Badin, Alceu André

2009-01-01

Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Elétrica. Este trabalho apresenta o estudo dos retificadores de tensão trifásicos isolados em baixa freqüência, com fator de potência unitário e regulação das tensões de saída, baseados nos transformadores trifásicos/bifásicos. Trata-se de conversores que transferem energia de uma fonte CA trifásica para uma fonte CC, fazendo circular na fonte CA uma corrente senoidal de a...

Three routes forward for biofuels: Incremental, leapfrog, and transitional

International Nuclear Information System (INIS)

Morrison, Geoff M.; Witcover, Julie; Parker, Nathan C.; Fulton, Lew

2016-01-01

This paper examines three technology routes for lowering the carbon intensity of biofuels: (1) a leapfrog route that focuses on major technological breakthroughs in lignocellulosic pathways at new, stand-alone biorefineries; (2) an incremental route in which improvements are made to existing U.S. corn ethanol and soybean biodiesel biorefineries; and (3) a transitional route in which biotechnology firms gain experience growing, handling, or chemically converting lignocellulosic biomass in a lower-risk fashion than leapfrog biorefineries by leveraging existing capital stock. We find the incremental route is likely to involve the largest production volumes and greenhouse gas benefits until at least the mid-2020s, but transitional and leapfrog biofuels together have far greater long-term potential. We estimate that the Renewable Fuel Standard, California's Low Carbon Fuel Standard, and federal tax credits provided an incentive of roughly $1.5–2.5 per gallon of leapfrog biofuel between 2012 and 2015, but that regulatory elements in these policies mostly incentivize lower-risk incremental investments. Adjustments in policy may be necessary to bring a greater focus on transitional technologies that provide targeted learning and cost reduction opportunities for leapfrog biofuels. - Highlights: • Three technological pathways are compared that lower carbon intensity of biofuels. • Incremental changes lead to faster greenhouse gas reductions. • Leapfrog changes lead to greatest long-term potential. • Two main biofuel policies (RFS and LCFS) are largely incremental in nature. • Transitional biofuels offer medium-risk, medium reward pathway.

Adults with initial metabolic syndrome have altered muscle deoxygenation during incremental exercise.

Science.gov (United States)

Machado, Alessandro da Costa; Barbosa, Thales Coelho; Kluser Sales, Allan Robson; de Souza, Marcio Nogueira; da Nóbrega, Antonio Claudio Lucas; Silva, Bruno Moreira

2017-02-01

Reduced aerobic power is independently associated with metabolic syndrome (MetS) incidence and prevalence in adults. This study investigated whether muscle deoxygenation (proxy of microvascular O 2 extraction) during incremental exercise is altered in MetS and associated with reduced oxygen consumption ( V˙O 2peak ). Twelve men with initial MetS (no overt diseases and medication-naive; mean ± SD, age 38 ± 7 years) and 12 healthy controls (HCs) (34 ± 7 years) completed an incremental cycling test to exhaustion, in which pulmonary ventilation and gas exchange (metabolic analyzer), as well as vastus lateralis deoxygenation (near infrared spectroscopy), were measured. Subjects with MetS, in contrast to HCs, showed lower V˙O 2peak normalized to total lean mass, similar V˙O 2 response to exercise, and earlier break point (BP) in muscle deoxygenation. Consequently, deoxygenation slope from BP to peak exercise was greater. Furthermore, absolute V˙O 2peak was positively associated with BP in correlations adjusted for total lean mass. MetS, without overt diseases, altered kinetics of muscle deoxygenation during incremental exercise, particularly at high-intensity exercise. Therefore, the balance between utilization and delivery of O 2 within skeletal muscle is impaired early in MetS natural history, which may contribute to the reduction in aerobic power. © 2017 The Obesity Society.

Determining frustum depth of 304 stainless steel plates with various diameters and thicknesses by incremental forming

Energy Technology Data Exchange (ETDEWEB)

Golabi, Sa' id [University of Kashan, Kashan (Iran, Islamic Republic of); Khazaali, Hossain [Bu-Ali Sina University, Hamedan (Iran, Islamic Republic of)

2014-08-15

Nowadays incremental forming is more popular because of its flexibility and cost saving. However, no engineering data is available for manufacturers for forming simple shapes like a frustum by incremental forming, and either expensive experimental tests or finite element analysis (FEA) should be employed to determine the depth of a frustum considering: thickness, material, cone diameter, wall angle, feed rate, tool diameter, etc. In this study, finite element technique, confirmed by experimental study, was employed for developing applicable curves for determining the depth of frustums made from 304 stainless steel (SS304) sheet with various cone angles, thicknesses from 0.3 to 1 mm and major diameters from 50 to 200 mm using incremental forming. Using these curves, the frustum angle and its depth knowing its thickness and major diameter can be predicted. The effects of feed rate, vertical pitch and tool diameter on frustum depth and surface quality were also addressed in this study.

Incrementality in naming and reading complex numerals: Evidence from eyetracking

NARCIS (Netherlands)

Korvorst, M.H.W.; Roelofs, A.P.A.; Levelt, W.J.M.

2006-01-01

Individuals speak incrementally when they interleave planning and articulation. Eyetracking, along with the measurement of speech onset latencies, can be used to gain more insight into the degree of incrementality adopted by speakers. In the current article, two eyetracking experiments are reported

Incremental Criterion Validity of the WJ-III COG Clinical Clusters: Marginal Predictive Effects beyond the General Factor

Science.gov (United States)

McGill, Ryan J.

2015-01-01

The current study examined the incremental validity of the clinical clusters from the Woodcock-Johnson III Tests of Cognitive Abilities (WJ-III COG) for predicting scores on the Woodcock-Johnson III Tests of Achievement (WJ-III ACH). All participants were children and adolescents (N = 4,722) drawn from the nationally representative WJ-III…

Atmospheric response to Saharan dust deduced from ECMWF reanalysis increments

Science.gov (United States)

Kishcha, P.; Alpert, P.; Barkan, J.; Kirchner, I.; Machenhauer, B.

2003-04-01

This study focuses on the atmospheric temperature response to dust deduced from a new source of data - the European Reanalysis (ERA) increments. These increments are the systematic errors of global climate models, generated in reanalysis procedure. The model errors result not only from the lack of desert dust but also from a complex combination of many kinds of model errors. Over the Sahara desert the dust radiative effect is believed to be a predominant model defect which should significantly affect the increments. This dust effect was examined by considering correlation between the increments and remotely-sensed dust. Comparisons were made between April temporal variations of the ERA analysis increments and the variations of the Total Ozone Mapping Spectrometer aerosol index (AI) between 1979 and 1993. The distinctive structure was identified in the distribution of correlation composed of three nested areas with high positive correlation (> 0.5), low correlation, and high negative correlation (Forecast(ECMWF) suggests that the PCA (NCA) corresponds mainly to anticyclonic (cyclonic) flow, negative (positive) vorticity, and downward (upward) airflow. These facts indicate an interaction between dust-forced heating /cooling and atmospheric circulation. The April correlation results are supported by the analysis of vertical distribution of dust concentration, derived from the 24-hour dust prediction system at Tel Aviv University (website: http://earth.nasa.proj.ac.il/dust/current/). For other months the analysis is more complicated because of the essential increasing of humidity along with the northward progress of the ITCZ and the significant impact on the increments.

Finance for incremental housing: current status and prospects for expansion

NARCIS (Netherlands)

Ferguson, B.; Smets, P.G.S.M.

2010-01-01

Appropriate finance can greatly increase the speed and lower the cost of incremental housing - the process used by much of the low/moderate-income majority of most developing countries to acquire shelter. Informal finance continues to dominate the funding of incremental housing. However, new sources

One Step at a Time: SBM as an Incremental Process.

Science.gov (United States)

Conrad, Mark

1995-01-01

Discusses incremental SBM budgeting and answers questions regarding resource equity, bookkeeping requirements, accountability, decision-making processes, and purchasing. Approaching site-based management as an incremental process recognizes that every school system engages in some level of site-based decisions. Implementation can be gradual and…

History Matters: Incremental Ontology Reasoning Using Modules

Science.gov (United States)

Cuenca Grau, Bernardo; Halaschek-Wiener, Christian; Kazakov, Yevgeny

The development of ontologies involves continuous but relatively small modifications. Existing ontology reasoners, however, do not take advantage of the similarities between different versions of an ontology. In this paper, we propose a technique for incremental reasoning—that is, reasoning that reuses information obtained from previous versions of an ontology—based on the notion of a module. Our technique does not depend on a particular reasoning calculus and thus can be used in combination with any reasoner. We have applied our results to incremental classification of OWL DL ontologies and found significant improvement over regular classification time on a set of real-world ontologies.

76 FR 73475 - Immigration Benefits Business Transformation, Increment I; Correction

Science.gov (United States)

2011-11-29

... Benefits Business Transformation, Increment I, 76 FR 53764 (Aug. 29, 2011). The final rule removed form... [CIS No. 2481-09; Docket No. USCIS-2009-0022] RIN 1615-AB83 Immigration Benefits Business Transformation, Increment I; Correction AGENCY: U.S. Citizenship and Immigration Services, DHS. ACTION: Final...

Investigating the incremental validity of cognitive variables in early mathematics screening.

Science.gov (United States)

Clarke, Ben; Shanley, Lina; Kosty, Derek; Baker, Scott K; Cary, Mari Strand; Fien, Hank; Smolkowski, Keith

2018-03-26

The purpose of this study was to investigate the incremental validity of a set of domain general cognitive measures added to a traditional screening battery of early numeracy measures. The sample consisted of 458 kindergarten students of whom 285 were designated as severely at-risk for mathematics difficulty. Hierarchical multiple regression results indicated that Wechsler Abbreviated Scales of Intelligence (WASI) Matrix Reasoning and Vocabulary subtests, and Digit Span Forward and Backward measures explained a small, but unique portion of the variance in kindergarten students' mathematics performance on the Test of Early Mathematics Ability-Third Edition (TEMA-3) when controlling for Early Numeracy Curriculum Based Measurement (EN-CBM) screening measures (R² change = .01). Furthermore, the incremental validity of the domain general cognitive measures was relatively stronger for the severely at-risk sample. We discuss results from the study in light of instructional decision-making and note the findings do not justify adding domain general cognitive assessments to mathematics screening batteries. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Tracking and recognition face in videos with incremental local sparse representation model

Science.gov (United States)

Wang, Chao; Wang, Yunhong; Zhang, Zhaoxiang

2013-10-01

This paper addresses the problem of tracking and recognizing faces via incremental local sparse representation. First a robust face tracking algorithm is proposed via employing local sparse appearance and covariance pooling method. In the following face recognition stage, with the employment of a novel template update strategy, which combines incremental subspace learning, our recognition algorithm adapts the template to appearance changes and reduces the influence of occlusion and illumination variation. This leads to a robust video-based face tracking and recognition with desirable performance. In the experiments, we test the quality of face recognition in real-world noisy videos on YouTube database, which includes 47 celebrities. Our proposed method produces a high face recognition rate at 95% of all videos. The proposed face tracking and recognition algorithms are also tested on a set of noisy videos under heavy occlusion and illumination variation. The tracking results on challenging benchmark videos demonstrate that the proposed tracking algorithm performs favorably against several state-of-the-art methods. In the case of the challenging dataset in which faces undergo occlusion and illumination variation, and tracking and recognition experiments under significant pose variation on the University of California, San Diego (Honda/UCSD) database, our proposed method also consistently demonstrates a high recognition rate.

Short-term load forecasting with increment regression tree

Energy Technology Data Exchange (ETDEWEB)

Yang, Jingfei; Stenzel, Juergen [Darmstadt University of Techonology, Darmstadt 64283 (Germany)

2006-06-15

This paper presents a new regression tree method for short-term load forecasting. Both increment and non-increment tree are built according to the historical data to provide the data space partition and input variable selection. Support vector machine is employed to the samples of regression tree nodes for further fine regression. Results of different tree nodes are integrated through weighted average method to obtain the comprehensive forecasting result. The effectiveness of the proposed method is demonstrated through its application to an actual system. (author)

The Time Course of Incremental Word Processing during Chinese Reading

Science.gov (United States)

Zhou, Junyi; Ma, Guojie; Li, Xingshan; Taft, Marcus

2018-01-01

In the current study, we report two eye movement experiments investigating how Chinese readers process incremental words during reading. These are words where some of the component characters constitute another word (an embedded word). In two experiments, eye movements were monitored while the participants read sentences with incremental words…

Switch-mode High Voltage Drivers for Dielectric Electro Active Polymer (DEAP) Incremental Actuators

DEFF Research Database (Denmark)

Thummala, Prasanth

voltage DC-DC converters for driving the DEAP based incremental actuators. The DEAP incremental actuator technology has the potential to be used in various industries, e.g., automotive, space and medicine. The DEAP incremental actuator consists of three electrically isolated and mechanically connected...

Efficient Incremental Checkpointing of Java Programs

DEFF Research Database (Denmark)

Lawall, Julia Laetitia; Muller, Gilles

2000-01-01

This paper investigates the optimization of language-level checkpointing of Java programs. First, we describe how to systematically associate incremental checkpoints with Java classes. While being safe, the genericness of this solution induces substantial execution overhead. Second, to solve...

Single-point incremental forming and formability-failure diagrams

DEFF Research Database (Denmark)

Silva, M.B.; Skjødt, Martin; Atkins, A.G.

2008-01-01

In a recent work [1], the authors constructed a closed-form analytical model that is capable of dealing with the fundamentals of single point incremental forming and explaining the experimental and numerical results published in the literature over the past couple of years. The model is based...... of deformation that are commonly found in general single point incremental forming processes; and (ii) to investigate the formability limits of SPIF in terms of ductile damage mechanics and the question of whether necking does, or does not, precede fracture. Experimentation by the authors together with data...

Complex Incremental Product Innovation in Established Service Firms: A Micro Institutional Perspective

OpenAIRE

Vermeulen, Patrick; Bosch, Frans; Volberda, Henk

2007-01-01

textabstractMany product innovation studies have described key determinants that should lead to successful incremental product innovation. Despite numerous studies suggesting how incremental product innovation should be successfully undertaken, many firms still struggle with this type of innovation. In this paper, we use an institutional perspective to investigate why established firms in the financial services industry struggle with their complex incremental product innovation efforts. We ar...

Incremental Innovation and Competitive Pressure in the Presence of Discrete Innovation

DEFF Research Database (Denmark)

Ghosh, Arghya; Kato, Takao; Morita, Hodaka

2017-01-01

Technical progress consists of improvements made upon the existing technology (incremental innovation) and innovative activities aiming at entirely new technology (discrete innovation). Incremental innovation is often of limited relevance to the new technology invented by successful discrete...

Calculation of the increment reduction in spruce stands by charcoal smoke

Energy Technology Data Exchange (ETDEWEB)

Guede, J

1954-01-01

Chronic damage to spruce trees by charcoal smoke, often hardly noticeable from outward appearance but causing marked reductions of wood increment can be determined by means of a calculation by increment cores. Sulfurous acid anhydride causes the closure of the stomates of needles by which the circulation of water is checked. The assimilation and the wood increment are reduced. The cores are taken from uninjured trees belonging to the dominant class. These trees are liable to irregular variations in the trend of growth only by atmospheric influences and disturbances in the circulation of water. The decrease of increment of a stand can be judged by the trend of growth of the basal area of sample trees. Two methods are applied: in the first method, the difference between the mean total increment before the damage has been caused and that after it is calculated by the yield table in deriving the site quality classes from the basal area growth of dominant stems. This is possible by using the mean diameter of each age class and the frequency curve of basal area for each site class. In the other method, the reduction of basal area increment of sample trees is measured directly. The total reduction of a stand can be judged by the share of the dominant class of stem in the total current growth of the basal area of a sound stand and by the percent of reduction of the sample trees.

The Dark Side of Malleability: Incremental Theory Promotes Immoral Behaviors.

Science.gov (United States)

Huang, Niwen; Zuo, Shijiang; Wang, Fang; Cai, Pan; Wang, Fengxiang

2017-01-01

Implicit theories drastically affect an individual's processing of social information, decision making, and action. The present research focuses on whether individuals who hold the implicit belief that people's moral character is fixed (entity theorists) and individuals who hold the implicit belief that people's moral character is malleable (incremental theorists) make different choices when facing a moral decision. Incremental theorists are less likely to make the fundamental attribution error (FAE), rarely make moral judgment based on traits and show more tolerance to immorality, relative to entity theorists, which might decrease the possibility of undermining the self-image when they engage in immoral behaviors, and thus we posit that incremental beliefs facilitate immorality. Four studies were conducted to explore the effect of these two types of implicit theories on immoral intention or practice. The association between implicit theories and immoral behavior was preliminarily examined from the observer perspective in Study 1, and the results showed that people tended to associate immoral behaviors (including everyday immoral intention and environmental destruction) with an incremental theorist rather than an entity theorist. Then, the relationship was further replicated from the actor perspective in Studies 2-4. In Study 2, implicit theories, which were measured, positively predicted the degree of discrimination against carriers of the hepatitis B virus. In Study 3, implicit theories were primed through reading articles, and the participants in the incremental condition showed more cheating than those in the entity condition. In Study 4, implicit theories were primed through a new manipulation, and the participants in the unstable condition (primed incremental theory) showed more discrimination than those in the other three conditions. Taken together, the results of our four studies were consistent with our hypotheses.

The Dark Side of Malleability: Incremental Theory Promotes Immoral Behaviors

Directory of Open Access Journals (Sweden)

Niwen Huang

2017-08-01

Full Text Available Implicit theories drastically affect an individual’s processing of social information, decision making, and action. The present research focuses on whether individuals who hold the implicit belief that people’s moral character is fixed (entity theorists and individuals who hold the implicit belief that people’s moral character is malleable (incremental theorists make different choices when facing a moral decision. Incremental theorists are less likely to make the fundamental attribution error (FAE, rarely make moral judgment based on traits and show more tolerance to immorality, relative to entity theorists, which might decrease the possibility of undermining the self-image when they engage in immoral behaviors, and thus we posit that incremental beliefs facilitate immorality. Four studies were conducted to explore the effect of these two types of implicit theories on immoral intention or practice. The association between implicit theories and immoral behavior was preliminarily examined from the observer perspective in Study 1, and the results showed that people tended to associate immoral behaviors (including everyday immoral intention and environmental destruction with an incremental theorist rather than an entity theorist. Then, the relationship was further replicated from the actor perspective in Studies 2–4. In Study 2, implicit theories, which were measured, positively predicted the degree of discrimination against carriers of the hepatitis B virus. In Study 3, implicit theories were primed through reading articles, and the participants in the incremental condition showed more cheating than those in the entity condition. In Study 4, implicit theories were primed through a new manipulation, and the participants in the unstable condition (primed incremental theory showed more discrimination than those in the other three conditions. Taken together, the results of our four studies were consistent with our hypotheses.

Dental caries increments and related factors in children with type 1 diabetes mellitus.

Science.gov (United States)

Siudikiene, J; Machiulskiene, V; Nyvad, B; Tenovuo, J; Nedzelskiene, I

2008-01-01

The aim of this study was to analyse possible associations between caries increments and selected caries determinants in children with type 1 diabetes mellitus and their age- and sex-matched non-diabetic controls, over 2 years. A total of 63 (10-15 years old) diabetic and non-diabetic pairs were examined for dental caries, oral hygiene and salivary factors. Salivary flow rates, buffer effect, concentrations of mutans streptococci, lactobacilli, yeasts, total IgA and IgG, protein, albumin, amylase and glucose were analysed. Means of 2-year decayed/missing/filled surface (DMFS) increments were similar in diabetics and their controls. Over the study period, both unstimulated and stimulated salivary flow rates remained significantly lower in diabetic children compared to controls. No differences were observed in the counts of lactobacilli, mutans streptococci or yeast growth during follow-up, whereas salivary IgA, protein and glucose concentrations were higher in diabetics than in controls throughout the 2-year period. Multivariable linear regression analysis showed that children with higher 2-year DMFS increments were older at baseline and had higher salivary glucose concentrations than children with lower 2-year DMFS increments. Likewise, higher 2-year DMFS increments in diabetics versus controls were associated with greater increments in salivary glucose concentrations in diabetics. Higher increments in active caries lesions in diabetics versus controls were associated with greater increments of dental plaque and greater increments of salivary albumin. Our results suggest that, in addition to dental plaque as a common caries risk factor, diabetes-induced changes in salivary glucose and albumin concentrations are indicative of caries development among diabetics. Copyright 2008 S. Karger AG, Basel.

Enabling Incremental Query Re-Optimization.

Science.gov (United States)

Liu, Mengmeng; Ives, Zachary G; Loo, Boon Thau

2016-01-01

As declarative query processing techniques expand to the Web, data streams, network routers, and cloud platforms, there is an increasing need to re-plan execution in the presence of unanticipated performance changes. New runtime information may affect which query plan we prefer to run. Adaptive techniques require innovation both in terms of the algorithms used to estimate costs , and in terms of the search algorithm that finds the best plan. We investigate how to build a cost-based optimizer that recomputes the optimal plan incrementally given new cost information, much as a stream engine constantly updates its outputs given new data. Our implementation especially shows benefits for stream processing workloads. It lays the foundations upon which a variety of novel adaptive optimization algorithms can be built. We start by leveraging the recently proposed approach of formulating query plan enumeration as a set of recursive datalog queries ; we develop a variety of novel optimization approaches to ensure effective pruning in both static and incremental cases. We further show that the lessons learned in the declarative implementation can be equally applied to more traditional optimizer implementations.

Incremental first pass technique to measure left ventricular ejection fraction

International Nuclear Information System (INIS)

Kocak, R.; Gulliford, P.; Hoggard, C.; Critchley, M.

1980-01-01

An incremental first pass technique was devised to assess the acute effects of any drug on left ventricular ejection fraction (LVEF) with or without a physiological stress. In particular, the effects of the vasodilater isosorbide dinitrate on LVEF before and after exercise were studied in 11 patients who had suffered cardiac failure. This was achieved by recording the passage of sup(99m)Tc pertechnetate through the heart at each stage of the study using a gamma camera computer system. Consistent values for four consecutive first pass values without exercise or drug in normal subjects illustrated the reproducibility of the technique. There was no significant difference between LVEF values obtained at rest and exercise before or after oral isosorbide dinitrate with the exception of one patient with gross mitral regurgitation. The advantages of the incremental first pass technique are that the patient need not be in sinus rhythm, the effects of physiological intervention may be studied and tests may also be repeated at various intervals during long term follow-up of patients. A disadvantage of the method is the limitation in the number of sequential measurements which can be carried out due to the amount of radioactivity injected. (U.K.)

Remodelagem do sistema computacional para dosimetria em radioterapia por nêutrons e fótons baseado em métodos estocásticos - SISCODES

OpenAIRE

Bruno Machado Trindade

2011-01-01

O presente trabalho apresenta a remodelagem do Sistema Computacional para Dosimetria em Radioterapia por Nêutrons e Fótons Baseado em Métodos Estocásticos . SISCODES. Para isso mostra a proposta inicial e estado anterior do sistema, as modificações e expansões propostas e executadas, e o estado atual de desenvolvimento do sistema. Melhorias futuras são propostas ao final do trabalho. O SISCODES é um sistema que permite a execução de planejamento computacional 3D em radioterapia, através de si...

Incremental validity of positive orientation: predictive efficiency beyond the five-factor model

Directory of Open Access Journals (Sweden)

Łukasz Roland Miciuk

2016-05-01

Full Text Available Background The relation of positive orientation (a basic predisposition to think positively of oneself, one’s life and one’s future and personality traits is still disputable. The purpose of the described research was to verify the hypothesis that positive orientation has predictive efficiency beyond the five-factor model. Participants and procedure One hundred and thirty participants (at the mean age M = 24.84 completed the following questionnaires: the Self-Esteem Scale (SES, the Satisfaction with Life Scale (SWLS, the Life Orientation Test-Revised (LOT-R, the Positivity Scale (P-SCALE, the NEO Five Factor Inventory (NEO-FFI, the Self-Concept Clarity Scale (SCC, the Generalized Self-Efficacy Scale (GSES and the Life Engagement Test (LET. Results The introduction of positive orientation as an additional predictor in the second step of regression analyses led to better prediction of the following variables: purpose in life, self-concept clarity and generalized self-efficacy. This effect was the strongest for predicting purpose in life (i.e. 14% increment of the explained variance. Conclusions The results confirmed our hypothesis that positive orientation can be characterized by incremental validity – its inclusion in the regression model (in addition to the five main factors of personality increases the amount of explained variance. These findings may provide further evidence for the legitimacy of measuring positive orientation and personality traits separately.

Assessment of peak oxygen uptake during handcycling: Test-retest reliability and comparison of a ramp-incremented and perceptually-regulated exercise test.

Science.gov (United States)

Hutchinson, Michael J; Paulson, Thomas A W; Eston, Roger; Goosey-Tolfrey, Victoria L

2017-01-01

To examine the reliability of a perceptually-regulated maximal exercise test (PRETmax) to measure peak oxygen uptake ([Formula: see text]) during handcycle exercise and to compare peak responses to those derived from a ramp-incremented protocol (RAMP). Twenty recreationally active individuals (14 male, 6 female) completed four trials across a 2-week period, using a randomised, counterbalanced design. Participants completed two RAMP protocols (20 W·min-1) in week 1, followed by two PRETmax in week 2, or vice versa. The PRETmax comprised five, 2-min stages clamped at Ratings of Perceived Exertion (RPE) 11, 13, 15, 17 and 20. Participants changed power output (PO) as often as required to maintain target RPE. Gas exchange variables (oxygen uptake, carbon dioxide production, minute ventilation), heart rate (HR) and PO were collected throughout. Differentiated RPE were collected at the end of each stage throughout trials. For relative [Formula: see text], coefficient of variation (CV) was equal to 4.1% and 4.8%, with ICC(3,1) of 0.92 and 0.85 for repeated measures from PRETmax and RAMP, respectively. Measurement error was 0.15 L·min-1 and 2.11 ml·kg-1·min-1 in PRETmax and 0.16 L·min-1 and 2.29 ml·kg-1·min-1 during RAMP for determining absolute and relative [Formula: see text], respectively. The difference in [Formula: see text] between PRETmax and RAMP was tending towards statistical significance (26.2 ± 5.1 versus 24.3 ± 4.0 ml·kg-1·min-1, P = 0.055). The 95% LoA were -1.9 ± 4.1 (-9.9 to 6.2) ml·kg-1·min-1. The PRETmax can be used as a reliable test to measure [Formula: see text] during handcycle exercise in recreationally active participants. Whilst PRETmax tended towards significantly greater [Formula: see text] values than RAMP, the difference is smaller than measurement error of determining [Formula: see text] from PRETmax and RAMP.

Incremental Validity of Personality Measures in Predicting Underwater Performance and Adaptation.

Science.gov (United States)

Colodro, Joaquín; Garcés-de-Los-Fayos, Enrique J; López-García, Juan J; Colodro-Conde, Lucía

2015-03-17

Intelligence and personality traits are currently considered effective predictors of human behavior and job performance. However, there are few studies about their relevance in the underwater environment. Data from a sample of military personnel performing scuba diving courses were analyzed with regression techniques, testing the contribution of individual differences and ascertaining the incremental validity of the personality in an environment with extreme psychophysical demands. The results confirmed the incremental validity of personality traits (ΔR 2 = .20, f 2 = .25) over the predictive contribution of general mental ability (ΔR 2 = .07, f 2 = .08) in divers' performance. Moreover, personality (R(L)2 = .34) also showed a higher validity to predict underwater adaptation than general mental ability ( R(L)2 = .09). The ROC curve indicated 86% of the maximum possible discrimination power for the prediction of underwater adaptation, AUC = .86, p personality traits as predictors of an effective response to the changing circumstances of military scuba diving. They also may improve the understanding of the behavioral effects and psychophysiological complications of diving and can also provide guidance for psychological intervention and prevention of risk in this extreme environment.

Finite element simulation and Experimental verification of Incremental Sheet metal Forming

Science.gov (United States)

Kaushik Yanamundra, Krishna; Karthikeyan, R., Dr.; Naranje, Vishal, Dr

2018-04-01

Incremental sheet metal forming is now a proven manufacturing technique that can be employed to obtain application specific, customized, symmetric or asymmetric shapes that are required by automobile or biomedical industries for specific purposes like car body parts, dental implants or knee implants. Finite element simulation of metal forming process is being performed successfully using explicit dynamics analysis of commercial FE software. The simulation is mainly useful in optimization of the process as well design of the final product. This paper focuses on simulating the incremental sheet metal forming process in ABAQUS, and validating the results using experimental methods. The shapes generated for testing are of trapezoid, dome and elliptical shapes whose G codes are written and fed into the CNC milling machine with an attached forming tool with a hemispherical bottom. The same pre-generated coordinates are used to simulate a similar machining conditions in ABAQUS and the tool forces, stresses and strains in the workpiece while machining are obtained as the output data. The forces experimentally were recorded using a dynamometer. The experimental and simulated results were then compared and thus conclusions were drawn.

Custeio Baseado em Atividades (ABC Aplicado ao Setor Público: Estudo de Caso no Colégio Militar do Rio de Janeiro (CMRJ

Directory of Open Access Journals (Sweden)

Luis Paulo Faria Carmo, Lino Martins Silva

2011-04-01

Full Text Available O objetivo desta pesquisa foi verificar se o método de Custeio Baseado em Atividades (ABC é adequado para ser aplicado na mensuração dos custos educacionais no Colégio Militar do Rio de Janeiro. Embora a Lei federal nº. 4.320/64 já determinasse a necessidade de apuração dos custos, ingressos e resultados, a Administração Pública ainda não sabe quanto custa cada uma de suas atividades. A relevância do tema deriva da necessidade de as Organizações Públicas de permitir o acompanhamento e a avaliação de sua gestão. Porém, o Sistema Integrado de Administração Financeira do Governo Federal (SIAFI, principal ferramenta do governo, não evidencia em suas contas o custo de cada atividade. A metodologia utilizada teve como “principal finalidade desenvolver, esclarecer e modificar idéias a fim de fornecer hipótese pesquisável para estudos posteriores” (Tripodi, Fellin e Meyer, 1981, p.64 e como fontes de pesquisa a revisão bibliográfica e a análise documental, sendo utilizado como estratégia metodológica de um estudo de caso real no Colégio Militar do Rio de Janeiro (CMRJ. A análise dos resultados aponta ser adequada a aplicação do método de Custeio Baseado em Atividades (ABC para evidenciação dos custos das atividades educacionais, bem como subsidiar a avaliação da qualidade do gasto Público.

Prediction model of ammonium uranyl carbonate calcination by microwave heating using incremental improved Back-Propagation neural network

Energy Technology Data Exchange (ETDEWEB)

Li Yingwei [Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Peng Jinhui, E-mail: jhpeng@kmust.edu.c [Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Liu Bingguo [Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Li Wei [Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Huang Daifu [No. 272 Nuclear Industry Factory, China National Nuclear Corporation, Hengyang, Hunan Province 421002 (China); Zhang Libo [Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China); Key Laboratory of Unconventional Metallurgy, Ministry of Education, Kunming University of Science and Technology, Kunming, Yunnan Province 650093 (China)

2011-05-15

Research highlights: The incremental improved Back-Propagation neural network prediction model using the Levenberg-Marquardt algorithm based on optimizing theory is put forward. The prediction model of the nonlinear system is built, which can effectively predict the experiment of microwave calcining of ammonium uranyl carbonate (AUC). AUC can accept the microwave energy and microwave heating can quickly decompose AUC. In the experiment of microwave calcining of AUC, the contents of U and U{sup 4+} increased with increasing of microwave power and irradiation time, and decreased with increasing of the material average depth. - Abstract: The incremental improved Back-Propagation (BP) neural network prediction model was put forward, which was very useful in overcoming the problems, such as long testing cycle, high testing quantity, difficulty of optimization for process parameters, many training data probably were offered by the way of increment batch and the limitation of the system memory could make the training data infeasible, which existed in the process of calcinations for ammonium uranyl carbonate (AUC) by microwave heating. The prediction model of the nonlinear system was built, which could effectively predict the experiment of microwave calcining of AUC. The predicted results indicated that the contents of U and U{sup 4+} were increased with increasing of microwave power and irradiation time, and decreased with increasing of the material average depth.

Prediction model of ammonium uranyl carbonate calcination by microwave heating using incremental improved Back-Propagation neural network

International Nuclear Information System (INIS)

Li Yingwei; Peng Jinhui; Liu Bingguo; Li Wei; Huang Daifu; Zhang Libo

2011-01-01

Research highlights: → The incremental improved Back-Propagation neural network prediction model using the Levenberg-Marquardt algorithm based on optimizing theory is put forward. → The prediction model of the nonlinear system is built, which can effectively predict the experiment of microwave calcining of ammonium uranyl carbonate (AUC). → AUC can accept the microwave energy and microwave heating can quickly decompose AUC. → In the experiment of microwave calcining of AUC, the contents of U and U 4+ increased with increasing of microwave power and irradiation time, and decreased with increasing of the material average depth. - Abstract: The incremental improved Back-Propagation (BP) neural network prediction model was put forward, which was very useful in overcoming the problems, such as long testing cycle, high testing quantity, difficulty of optimization for process parameters, many training data probably were offered by the way of increment batch and the limitation of the system memory could make the training data infeasible, which existed in the process of calcinations for ammonium uranyl carbonate (AUC) by microwave heating. The prediction model of the nonlinear system was built, which could effectively predict the experiment of microwave calcining of AUC. The predicted results indicated that the contents of U and U 4+ were increased with increasing of microwave power and irradiation time, and decreased with increasing of the material average depth.

Reference values for the incremental shuttle walk test in patients with cardiovascular disease entering exercise-based cardiac rehabilitation.

Science.gov (United States)

Cardoso, Fernando M F; Almodhy, Meshal; Pepera, Garyfalia; Stasinopoulos, Dimitrios M; Sandercock, Gavin R H

2017-01-01

The incremental shuttle walk test (ISWT) is used to assess functional capacity of patients entering cardiac rehabilitation. Factors such as age and sex account for a proportion of the variance in test performance in healthy individuals but there are no reference values for patients with cardiovascular disease. The aim of this study was to produce reference values for the ISWT. Participants were n = 548 patients referred to outpatient cardiac rehabilitation who underwent a clinical examination and performed the ISWT. We used regression to identify predictors of performance and produced centile values using the generalised additive model for location, scale and shape model. Men walked significantly further than women (395 ± 165 vs. 269 ± 118 m; t = 9.5, P < 0.001) so data were analysed separately by sex. Age (years) was the strongest predictor of performance in men (β = -5.9; 95% CI: -7.1 to -4.6 m) and women (β = -4.8; 95% CI: -6.3 to 3.3). Centile curves demonstrated a broadly linear decrease in expected ISWT values in males (25-85 years) and a more curvilinear trend in females. Patients entering cardiac rehabilitation present with highly heterogeneous ISWT values. Much of the variance in performance can be explained by patients' age and sex. Comparing absolute values with age-and sex-specific reference values may aid interpretation of ISWT performance during initial patient assessment at entry to cardiac rehabilitation.

Context-dependent incremental timing cells in the primate hippocampus.

Science.gov (United States)

Sakon, John J; Naya, Yuji; Wirth, Sylvia; Suzuki, Wendy A

2014-12-23

We examined timing-related signals in primate hippocampal cells as animals performed an object-place (OP) associative learning task. We found hippocampal cells with firing rates that incrementally increased or decreased across the memory delay interval of the task, which we refer to as incremental timing cells (ITCs). Three distinct categories of ITCs were identified. Agnostic ITCs did not distinguish between different trial types. The remaining two categories of cells signaled time and trial context together: One category of cells tracked time depending on the behavioral action required for a correct response (i.e., early vs. late release), whereas the other category of cells tracked time only for those trials cued with a specific OP combination. The context-sensitive ITCs were observed more often during sessions where behavioral learning was observed and exhibited reduced incremental firing on incorrect trials. Thus, single primate hippocampal cells signal information about trial timing, which can be linked with trial type/context in a learning-dependent manner.

Avaliação comparativa do custeio baseado em atividades e do custeio variável: um estudo de caso no IPEN

OpenAIRE

Joselfina Maria da Silva Esteves

2010-01-01

Esta pesquisa tem por objetivo comparar os resultados obtidos com a aplicação dos métodos de Custeio Baseado em Atividades e do método de Custeio Variável em uma unidade administrativa do Governo Federal, a saber: a Instalação de Radiofarmácia do IPEN (Instituto de Pesquisas Energéticas e Nucleares), sendo esta uma unidade de produção de radiofármacos e de pesquisas. Diante da necessidade de se adotar uma visão mais econômica e gerencial da administração pública, a investigação proporcionou i...

Statistics of wind direction and its increments

International Nuclear Information System (INIS)

Doorn, Eric van; Dhruva, Brindesh; Sreenivasan, Katepalli R.; Cassella, Victor

2000-01-01

We study some elementary statistics of wind direction fluctuations in the atmosphere for a wide range of time scales (10 -4 sec to 1 h), and in both vertical and horizontal planes. In the plane parallel to the ground surface, the direction time series consists of two parts: a constant drift due to large weather systems moving with the mean wind speed, and fluctuations about this drift. The statistics of the direction fluctuations show a rough similarity to Brownian motion but depend, in detail, on the wind speed. This dependence manifests itself quite clearly in the statistics of wind-direction increments over various intervals of time. These increments are intermittent during periods of low wind speeds but Gaussian-like during periods of high wind speeds. (c) 2000 American Institute of Physics

Incremental Beliefs of Ability, Achievement Emotions and Learning of Singapore Students

Science.gov (United States)

Luo, Wenshu; Lee, Kerry; Ng, Pak Tee; Ong, Joanne Xiao Wei

2014-01-01

This study investigated the relationships of students' incremental beliefs of math ability to their achievement emotions, classroom engagement and math achievement. A sample of 273 secondary students in Singapore were administered measures of incremental beliefs of math ability, math enjoyment, pride, boredom and anxiety, as well as math classroom…

The Cognitive Underpinnings of Incremental Rehearsal

Science.gov (United States)

Varma, Sashank; Schleisman, Katrina B.

2014-01-01

Incremental rehearsal (IR) is a flashcard technique that has been developed and evaluated by school psychologists. We discuss potential learning and memory effects from cognitive psychology that may explain the observed superiority of IR over other flashcard techniques. First, we propose that IR is a form of "spaced practice" that…

Algoritmo de um teste adaptativo informatizado com base na teoria da resposta ao item para a estimação da usabilidade de sites de e-commerce

Directory of Open Access Journals (Sweden)

Fernando de Jesus Moreira Junior

2013-09-01

Full Text Available O presente artigo propõe um algoritmo de um teste adaptativo informatizado baseado na teoria da resposta ao item, desenvolvido para estimar o grau de usabilidade de sites de e-commerce. Cinco algoritmos baseados no critério da máxima informação foram desenvolvidos e testados via simulação. O algoritmo com o melhor desempenho foi aplicado nos dados reais de 361 sites de e-commerce. Os resultados mostraram que o algoritmo desenvolvido consegue obter uma boa estimativa para o grau de usabilidade de sites de e-commerce com a aplicação de 13 itens.

Successive 1-Month Weight Increments in Infancy Can Be Used to Screen for Faltering Linear Growth.

Science.gov (United States)

Onyango, Adelheid W; Borghi, Elaine; de Onis, Mercedes; Frongillo, Edward A; Victora, Cesar G; Dewey, Kathryn G; Lartey, Anna; Bhandari, Nita; Baerug, Anne; Garza, Cutberto

2015-12-01

Linear growth faltering in the first 2 y contributes greatly to a high stunting burden, and prevention is hampered by the limited capacity in primary health care for timely screening and intervention. This study aimed to determine an approach to predicting long-term stunting from consecutive 1-mo weight increments in the first year of life. By using the reference sample of the WHO velocity standards, the analysis explored patterns of consecutive monthly weight increments among healthy infants. Four candidate screening thresholds of successive increments that could predict stunting were considered, and one was selected for further testing. The selected threshold was applied in a cohort of Bangladeshi infants to assess its predictive value for stunting at ages 12 and 24 mo. Between birth and age 12 mo, 72.6% of infants in the WHO sample tracked within 1 SD of their weight and length. The selected screening criterion ("event") was 2 consecutive monthly increments below the 15th percentile. Bangladeshi infants were born relatively small and, on average, tracked downward from approximately age 6 to strategy is effective, the estimated preventable proportion in the group who experienced the event would be 34% at 12 mo and 24% at 24 mo. This analysis offers an approach for frontline workers to identify children at risk of stunting, allowing for timely initiation of preventive measures. It opens avenues for further investigation into evidence-informed application of the WHO growth velocity standards. © 2015 American Society for Nutrition.

Recuperação inteligente de jurisprudência: uma avaliação do raciocínio baseado em casos aplicado a recuperação de jurisprudências no Tribunal Regional Eleitoral do Distrito Federal

Directory of Open Access Journals (Sweden)

Symball Rufino de Oliveira

2011-04-01

Full Text Available Trata-se de uma pesquisa cujo objeto é avaliar a medida de precisão de um sistema de recuperação de informação jurídica (jurisprudência que utiliza técnica de inteligência artificial conhecida como Raciocínio Baseado em Casos (RBC. Nesse modelo as jurisprudências são organizadas sob a forma de casos jurídicos concretos. O raciocínio baseado em casos tem como princípio a idéias de que um caso jurídico passado pode ser útil para resolver um problema atual, desde que exista entre eles algum grau de semelhança. Para estabelecer semelhanças entre casos atuais e passados o modelo estudado propõe o uso de cálculo de similaridade que é realizado com base na comparação de índices temáticos obtidos a partir do processo de indexação realizado por especialistas utilizando-se como apoio um tesauro jurídico. Esta pesquisa utiliza como universo as jurisprudências produzidas pelo Tribunal Regional Eleitoral do Distrito Federal. A amostra foi composta, considerando o recorte dado à pesquisa, por jurisprudências eleitorais produzidas nas eleições gerais de 2006 no Distrito Federal. Para realizar a avaliação do modelo, foi construído um protótipo do sistema de recuperação de informação baseado em casos. Em seguida, avaliou-se o protótipo quanto ao grau de precisão obtido no resultado de um conjunto de buscas. O método adotado para as avaliações foi o mesmo utilizado na Text REtrieval Conference (TREC de 2007, tarefa Legal Track. Após a coleta dos dados foi elaborado um relatório discutindo a possibilidade do sistema de recuperação de informação baseado em casos ser considerado um paradigma para a recuperação de informação jurídica eleitoral.

Avaliação dos métodos de Grant, Vora & Weeks e dos mínimos quadrados na determinação do valor incremental do mercado de carbono nos projetos de geração de energia elétrica no Brasil

Directory of Open Access Journals (Sweden)

Fabio Rodrigo Siqueira Batista

2011-04-01

Full Text Available Este trabalho tem por objetivo avaliar a robustez dos métodos de Grant, Vora & Weeks e dos Mínimos Quadrados quando aplicados na avaliação de projetos de geração de energia eletrica a partir de fontes renovavéis desenvolvidos no ambito do Mecanismo de Desenvolvimento Limpo do Protocolo de Quioto. Em primeiro lugar, a metodologia proposta consiste em utilizar o modelo NEWAVE para estabelecer cenários hidrológicos de despacho para as usinas conectadas ao sistema interligado nacional. Em seguida, baseado no escopo da metodologia ACM0002, considera-se a incerteza associada a evolução temporal da linha de base do projeto. Finalmente, o valor incremental do mercado de carbono e estimado utilizando-se a Teoria das Opções Reais. Para tanto os métodos numericos citados anteriormente são utilizados sob a premissa de que o preço do crédito de carbono se comporta de forma aleatoria segundo as premissas de um Movimento Geometrico Browniano

Single point incremental forming of tailored blanks produced by friction stir welding

DEFF Research Database (Denmark)

Silva, M.B.; Skjødt, Martin; Vilaca, P.

2009-01-01

fromthe rotating single point-forming tool. Formability of the tailor welded blanks (TWB) is evaluated by means of benchmark tests carried out on truncated conical and pyramidal shapes and results are compared with similar tests performed on conventional reference blanks of the same material. Results show......This paper is focused on the single point incremental forming (SPIF) of tailored welded blanks produced by friction stirwelding (FSW). Special emphasis is placed on the know-how for producing the tailored blanks and on the utilization of innovative forming strategies to protect thewelding joint...... that the combination of SPIF with tailored welded blanks produced by FSW seems promising in the manufacture of complex sheet metal parts with high depths....

The Dark Side of Malleability: Incremental Theory Promotes Immoral Behaviors

OpenAIRE

Huang, Niwen; Zuo, Shijiang; Wang, Fang; Cai, Pan; Wang, Fengxiang

2017-01-01

Implicit theories drastically affect an individual’s processing of social information, decision making, and action. The present research focuses on whether individuals who hold the implicit belief that people’s moral character is fixed (entity theorists) and individuals who hold the implicit belief that people’s moral character is malleable (incremental theorists) make different choices when facing a moral decision. Incremental theorists are less likely to make the fundamental attribution err...

Alternatives to the six-minute walk test in pulmonary arterial hypertension.

Science.gov (United States)

Mainguy, Vincent; Malenfant, Simon; Neyron, Anne-Sophie; Saey, Didier; Maltais, François; Bonnet, Sébastien; Provencher, Steeve

2014-01-01

The physiological response during the endurance shuttle walk test (ESWT), the cycle endurance test (CET) and the incremental shuttle walk test (ISWT) remains unknown in PAH. We tested the hypothesis that endurance tests induce a near-maximal physiological demand comparable to incremental tests. We also hypothesized that differences in respiratory response during exercise would be related to the characteristics of the exercise tests. Within two weeks, twenty-one PAH patients (mean age: 54(15) years; mean pulmonary arterial pressure: 42(12) mmHg) completed two cycling exercise tests (incremental cardiopulmonary cycling exercise test (CPET) and CET) and three field tests (ISWT, ESWT and six-minute walk test (6MWT)). Physiological parameters were continuously monitored using the same portable telemetric device. Peak oxygen consumption (VO(2peak)) was similar amongst the five exercise tests (p = 0.90 by ANOVA). Walking distance correlated markedly with the VO(2peak) reached during field tests, especially when weight was taken into account. At 100% exercise, most physiological parameters were similar between incremental and endurance tests. However, the trends overtime differed. In the incremental tests, slopes for these parameters rose steadily over the entire duration of the tests, whereas in the endurance tests, slopes rose sharply from baseline to 25% of maximum exercise at which point they appeared far less steep until test end. Moreover, cycling exercise tests induced higher respiratory exchange ratio, ventilatory demand and enhanced leg fatigue measured subjectively and objectively. Endurance tests induce a maximal physiological demand in PAH. Differences in peak respiratory response during exercise are related to the modality (cycling vs. walking) rather than the progression (endurance vs. incremental) of the exercise tests.

Incremental deformation: A literature review

Directory of Open Access Journals (Sweden)

Nasulea Daniel

2017-01-01

Full Text Available Nowadays the customer requirements are in permanent changing and according with them the tendencies in the modern industry is to implement flexible manufacturing processes. In the last decades, metal forming gained attention of the researchers and considerable changes has occurred. Because for a small number of parts, the conventional metal forming processes are expensive and time-consuming in terms of designing and manufacturing preparation, the manufacturers and researchers became interested in flexible processes. One of the most investigated flexible processes in metal forming is incremental sheet forming (ISF. ISF is an advanced flexible manufacturing process which allows to manufacture complex 3D products without expensive dedicated tools. In most of the cases it is needed for an ISF process the following: a simple tool, a fixing device for sheet metal blank and a universal CNC machine. Using this process it can be manufactured axis-symmetric parts, usually using a CNC lathe but also complex asymmetrical parts using CNC milling machines, robots or dedicated equipment. This paper aim to present the current status of incremental sheet forming technologies in terms of process parameters and their influences, wall thickness distribution, springback effect, formability, surface quality and the current main research directions.

Complex Incremental Product Innovation in Established Service Firms: A Micro Institutional Perspective

NARCIS (Netherlands)

P.A.M. Vermeulen (Patrick); F.A.J. van den Bosch (Frans); H.W. Volberda (Henk)

2006-01-01

textabstractMany product innovation studies have described key determinants that should lead to successful incremental product innovation. Despite numerous studies suggesting how incremental product innovation should be successfully undertaken, many firms still struggle with this type of innovation.

Complex Incremental Product Innovation in Established Service Firms: A Micro Institutional Perspective

NARCIS (Netherlands)

P.A.M. Vermeulen (Patrick); F.A.J. van den Bosch (Frans); H.W. Volberda (Henk)

2007-01-01

textabstractMany product innovation studies have described key determinants that should lead to successful incremental product innovation. Despite numerous studies suggesting how incremental product innovation should be successfully undertaken, many firms still struggle with this type of innovation.

Teraflop-scale Incremental Machine Learning

OpenAIRE

Özkural, Eray

2011-01-01

We propose a long-term memory design for artificial general intelligence based on Solomonoff's incremental machine learning methods. We use R5RS Scheme and its standard library with a few omissions as the reference machine. We introduce a Levin Search variant based on Stochastic Context Free Grammar together with four synergistic update algorithms that use the same grammar as a guiding probability distribution of programs. The update algorithms include adjusting production probabilities, re-u...

A Self-Organizing Incremental Neural Network based on local distribution learning.

Science.gov (United States)

Xing, Youlu; Shi, Xiaofeng; Shen, Furao; Zhou, Ke; Zhao, Jinxi

2016-12-01

In this paper, we propose an unsupervised incremental learning neural network based on local distribution learning, which is called Local Distribution Self-Organizing Incremental Neural Network (LD-SOINN). The LD-SOINN combines the advantages of incremental learning and matrix learning. It can automatically discover suitable nodes to fit the learning data in an incremental way without a priori knowledge such as the structure of the network. The nodes of the network store rich local information regarding the learning data. The adaptive vigilance parameter guarantees that LD-SOINN is able to add new nodes for new knowledge automatically and the number of nodes will not grow unlimitedly. While the learning process continues, nodes that are close to each other and have similar principal components are merged to obtain a concise local representation, which we call a relaxation data representation. A denoising process based on density is designed to reduce the influence of noise. Experiments show that the LD-SOINN performs well on both artificial and real-word data. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimized Basis Sets for the Environment in the Domain-Specific Basis Set Approach of the Incremental Scheme.

Science.gov (United States)

Anacker, Tony; Hill, J Grant; Friedrich, Joachim

2016-04-21

Minimal basis sets, denoted DSBSenv, based on the segmented basis sets of Ahlrichs and co-workers have been developed for use as environmental basis sets for the domain-specific basis set (DSBS) incremental scheme with the aim of decreasing the CPU requirements of the incremental scheme. The use of these minimal basis sets within explicitly correlated (F12) methods has been enabled by the optimization of matching auxiliary basis sets for use in density fitting of two-electron integrals and resolution of the identity. The accuracy of these auxiliary sets has been validated by calculations on a test set containing small- to medium-sized molecules. The errors due to density fitting are about 2-4 orders of magnitude smaller than the basis set incompleteness error of the DSBSenv orbital basis sets. Additional reductions in computational cost have been tested with the reduced DSBSenv basis sets, in which the highest angular momentum functions of the DSBSenv auxiliary basis sets have been removed. The optimized and reduced basis sets are used in the framework of the domain-specific basis set of the incremental scheme to decrease the computation time without significant loss of accuracy. The computation times and accuracy of the previously used environmental basis and that optimized in this work have been validated with a test set of medium- to large-sized systems. The optimized and reduced DSBSenv basis sets decrease the CPU time by about 15.4% and 19.4% compared with the old environmental basis and retain the accuracy in the absolute energy with standard deviations of 0.99 and 1.06 kJ/mol, respectively.

Incremental Reconstruction of Urban Environments by Edge-Points Delaunay Triangulation

OpenAIRE

Romanoni, Andrea; Matteucci, Matteo

2016-01-01

Urban reconstruction from a video captured by a surveying vehicle constitutes a core module of automated mapping. When computational power represents a limited resource and, a detailed map is not the primary goal, the reconstruction can be performed incrementally, from a monocular video, carving a 3D Delaunay triangulation of sparse points; this allows online incremental mapping for tasks such as traversability analysis or obstacle avoidance. To exploit the sharp edges of urban landscape, we ...

Quasi-static incremental behavior of granular materials: Elastic-plastic coupling and micro-scale dissipation

Science.gov (United States)

Kuhn, Matthew R.; Daouadji, Ali

2018-05-01

The paper addresses a common assumption of elastoplastic modeling: that the recoverable, elastic strain increment is unaffected by alterations of the elastic moduli that accompany loading. This assumption is found to be false for a granular material, and discrete element (DEM) simulations demonstrate that granular materials are coupled materials at both micro- and macro-scales. Elasto-plastic coupling at the macro-scale is placed in the context of thermomechanics framework of Tomasz Hueckel and Hans Ziegler, in which the elastic moduli are altered by irreversible processes during loading. This complex behavior is explored for multi-directional loading probes that follow an initial monotonic loading. An advanced DEM model is used in the study, with non-convex non-spherical particles and two different contact models: a conventional linear-frictional model and an exact implementation of the Hertz-like Cattaneo-Mindlin model. Orthotropic true-triaxial probes were used in the study (i.e., no direct shear strain), with tiny strain increments of 2 ×10-6 . At the micro-scale, contact movements were monitored during small increments of loading and load-reversal, and results show that these movements are not reversed by a reversal of strain direction, and some contacts that were sliding during a loading increment continue to slide during reversal. The probes show that the coupled part of a strain increment, the difference between the recoverable (elastic) increment and its reversible part, must be considered when partitioning strain increments into elastic and plastic parts. Small increments of irreversible (and plastic) strain and contact slipping and frictional dissipation occur for all directions of loading, and an elastic domain, if it exists at all, is smaller than the strain increment used in the simulations.

Stable isotope time series and dentin increments elucidate Pleistocene proboscidean paleobiology

Science.gov (United States)

Fisher, Daniel; Rountrey, Adam; Smith, Kathlyn; Fox, David

2010-05-01

Investigations of stable isotope composition of mineralized tissues have added greatly to our knowledge of past climates and dietary behaviors of organisms, even when they are implemented through 'bulk sampling', in which a single assay yields a single, time-averaged value. Likewise, the practice of 'sclerochronology', which documents periodic structural increments comprising a growth record for accretionary tissues, offers insights into rates of growth and age data at a scale of temporal resolution permitted by the nature of structural increments. We combine both of these approaches to analyze dental tissues of late Pleistocene proboscideans. Tusk dentin typically preserves a record of accretionary growth consisting of histologically distinct increments on daily, approximately weekly, and yearly time scales. Working on polished transverse or longitudinal sections, we mill out a succession of temporally controlled dentin samples bounded by clear structural increments with a known position in the sequence of tusk growth. We further subject each sample (or an aliquot thereof) to multiple compositional analyses - most frequently to assess δ18O and δ13C of hydroxyapatite carbonate, and δ13C and δ15N of collagen. This yields, for each animal and each series of years investigated, a set of parallel compositional time series with a temporal resolution of 1-2 months (or finer if we need additional precision). Patterns in variation of thickness of periodic sub-annual increments yield insight into intra-annual and inter-annual variation of tusk growth rate. This is informative even by itself, but it is still more valuable when coupled with compositional time series. Further, the controls on different stable isotope systems are sufficiently different that the data ensemble yields 'much more than the sum of its parts.' By assessing how compositions and growth rates covary, we monitor with greater confidence changes in local climate, diet, behavior, and health status. We

Motivation and performance in physical education: an experimental test.

Science.gov (United States)

Moreno, Juan A; González-Cutre, David; Martín-Albo, José; Cervelló, Eduardo

2010-01-01

The purpose of this study was to analyse, experimentally, the relationships between motivation and performance in a lateral movement test in physical education. The study group consisted of 363 students (227 boys and 136 girls), aged between 12 and 16, who were randomly divided into three groups: an experimental group in which an incremental ability belief was induced, another experimental group in which an entity ability belief was induced, and a control group where there was no intervention. Measurements were made of situational intrinsic motivation, perceived competence in executing the task and performance. The results revealed that the incremental group reported higher scores on the situational intrinsic motivation scale. The entity group demonstrated better performance in the first test attempt than the incremental group but, in the second attempt, the performance was similar in the different groups. Perhaps the initial differences in performance disappeared because the incremental group counted on improving in the second attempt. These results are discussed in relation to the intensity with which the teacher conveys information relating to incremental ability belief of the pupil to increase intrinsic motivation and performance. Key pointsThe incremental group showed more situational intrinsic motivation.The entity group showed higher performance in the first test attempt, but significant differences disappeared in the second attempt.It seems that this incremental belief and greater intrinsic motivation made the students trust they would improve their performance in the second attempt at the lateral movement test.

Alternatives to the six-minute walk test in pulmonary arterial hypertension.

Directory of Open Access Journals (Sweden)

Vincent Mainguy

Full Text Available INTRODUCTION: The physiological response during the endurance shuttle walk test (ESWT, the cycle endurance test (CET and the incremental shuttle walk test (ISWT remains unknown in PAH. We tested the hypothesis that endurance tests induce a near-maximal physiological demand comparable to incremental tests. We also hypothesized that differences in respiratory response during exercise would be related to the characteristics of the exercise tests. METHODS: Within two weeks, twenty-one PAH patients (mean age: 54(15 years; mean pulmonary arterial pressure: 42(12 mmHg completed two cycling exercise tests (incremental cardiopulmonary cycling exercise test (CPET and CET and three field tests (ISWT, ESWT and six-minute walk test (6MWT. Physiological parameters were continuously monitored using the same portable telemetric device. RESULTS: Peak oxygen consumption (VO(2peak was similar amongst the five exercise tests (p = 0.90 by ANOVA. Walking distance correlated markedly with the VO(2peak reached during field tests, especially when weight was taken into account. At 100% exercise, most physiological parameters were similar between incremental and endurance tests. However, the trends overtime differed. In the incremental tests, slopes for these parameters rose steadily over the entire duration of the tests, whereas in the endurance tests, slopes rose sharply from baseline to 25% of maximum exercise at which point they appeared far less steep until test end. Moreover, cycling exercise tests induced higher respiratory exchange ratio, ventilatory demand and enhanced leg fatigue measured subjectively and objectively. CONCLUSION: Endurance tests induce a maximal physiological demand in PAH. Differences in peak respiratory response during exercise are related to the modality (cycling vs. walking rather than the progression (endurance vs. incremental of the exercise tests.

Automatic incrementalization of Prolog based static analyses

DEFF Research Database (Denmark)

Eichberg, Michael; Kahl, Matthias; Saha, Diptikalyan

2007-01-01

Modem development environments integrate various static analyses into the build process. Analyses that analyze the whole project whenever the project changes are impractical in this context. We present an approach to automatic incrementalization of analyses that are specified as tabled logic prog...

A new recursive incremental algorithm for building minimal acyclic deterministic finite automata

NARCIS (Netherlands)

Watson, B.W.; Martin-Vide, C.; Mitrana, V.

2003-01-01

This chapter presents a new algorithm for incrementally building minimal acyclic deterministic finite automata. Such minimal automata are a compact representation of a finite set of words (e.g. in a spell checker). The incremental aspect of such algorithms (where the intermediate automaton is

Atmospheric response to Saharan dust deduced from ECMWF reanalysis (ERA) temperature increments

Science.gov (United States)

Kishcha, P.; Alpert, P.; Barkan, J.; Kirchner, I.; Machenhauer, B.

2003-09-01

This study focuses on the atmospheric temperature response to dust deduced from a new source of data the European Reanalysis (ERA) increments. These increments are the systematic errors of global climate models, generated in the reanalysis procedure. The model errors result not only from the lack of desert dust but also from a complex combination of many kinds of model errors. Over the Sahara desert the lack of dust radiative effect is believed to be a predominant model defect which should significantly affect the increments. This dust effect was examined by considering correlation between the increments and remotely sensed dust. Comparisons were made between April temporal variations of the ERA analysis increments and the variations of the Total Ozone Mapping Spectrometer aerosol index (AI) between 1979 and 1993. The distinctive structure was identified in the distribution of correlation composed of three nested areas with high positive correlation (>0.5), low correlation and high negative correlation (Forecast (ECMWF) suggest that the PCA (NCA) corresponds mainly to anticyclonic (cyclonic) flow, negative (positive) vorticity and downward (upward) airflow. These findings are associated with the interaction between dust-forced heating/cooling and atmospheric circulation. This paper contributes to a better understanding of dust radiative processes missed in the model.

Differential incremental value of ultrasound carotid intima-media thickness, carotid plaque, and cardiac calcium to predict angiographic coronary artery disease across Framingham risk score strata in the APRES multicentre study.

Science.gov (United States)

Gaibazzi, Nicola; Rigo, Fausto; Facchetti, Rita; Carerj, Scipione; Giannattasio, Cristina; Moreo, Antonella; Mureddu, Gian Francesco; Salvetti, Massimo; Grolla, Elisabetta; Faden, Giacomo; Cesana, Francesca; Faggiano, Pompilio

2016-09-01

According to recent data, more accurate selection of patients undergoing coronary angiography for suspected coronary artery disease (CAD) is needed. From the Active PREvention Study multicentre prospective study, we further analyse whether carotid intima-media thickness (cIMT), carotid plaques (cPL), and echocardiographic cardiac calcium score (eCS) have incremental discriminatory and reclassification predictive value for CAD over clinical risk score in subjects undergoing coronary angiography, specifically depending on their low, intermediate, or high class of clinical risk. In eight centres, 445 subjects without history of prior CAD but with chest pain of recent onset and/or a positive/inconclusive stress test for ischaemia prospectively underwent clinically indicated elective coronary angiography after cardiac and carotid ultrasound assessments with measurements of cIMT, cPL, and eCS. The study population was divided into subjects at low (10%), intermediate (10-20%), and high (>20%) Framingham risk score (FRS). Ultrasound parameters were tested for their incremental value to predict CAD over FRS, in each pre-test risk category. No significant difference could be appreciated between the discrimination value of FRS and Diagnostic Imaging for Coronary Artery Disease score for the presence of CAD. eCS or cPL demonstrated significant incremental prediction over FRS, consistently in the three FRS categories (P risk subjects, in whom cPL was apparently not incremental over FRS, and eCS was only of borderline significance for better discrimination. Ultrasound eCS and cPL assessments were significant predictors of angiographic CAD in patients without prior CAD but with signs or symptoms suspect for CAD, independently and incrementally to FRS, across all pre-test risk probability strata, although in high-risk subjects, only eCS maintained an incremental value. The use of cIMT was not significantly incrementally useful in any FRS risk category. Published on behalf of the

The balanced scorecard: an incremental approach model to health care management.

Science.gov (United States)

Pineno, Charles J

2002-01-01

The balanced scorecard represents a technique used in strategic management to translate an organization's mission and strategy into a comprehensive set of performance measures that provide the framework for implementation of strategic management. This article develops an incremental approach for decision making by formulating a specific balanced scorecard model with an index of nonfinancial as well as financial measures. The incremental approach to costs, including profit contribution analysis and probabilities, allows decisionmakers to assess, for example, how their desire to meet different health care needs will cause changes in service design. This incremental approach to the balanced scorecard may prove to be useful in evaluating the existence of causality relationships between different objective and subjective measures to be included within the balanced scorecard.

Volatilities, traded volumes, and the hypothesis of price increments in derivative securities

Science.gov (United States)

Lim, Gyuchang; Kim, SooYong; Scalas, Enrico; Kim, Kyungsik

2007-08-01

A detrended fluctuation analysis (DFA) is applied to the statistics of Korean treasury bond (KTB) futures from which the logarithmic increments, volatilities, and traded volumes are estimated over a specific time lag. In this study, the logarithmic increment of futures prices has no long-memory property, while the volatility and the traded volume exhibit the existence of the long-memory property. To analyze and calculate whether the volatility clustering is due to a inherent higher-order correlation not detected by with the direct application of the DFA to logarithmic increments of KTB futures, it is of importance to shuffle the original tick data of future prices and to generate a geometric Brownian random walk with the same mean and standard deviation. It was found from a comparison of the three tick data that the higher-order correlation inherent in logarithmic increments leads to volatility clustering. Particularly, the result of the DFA on volatilities and traded volumes can be supported by the hypothesis of price changes.

Teste Adaptativo Computadorizado Multidimensional com propósitos educacionais: princípios e métodos

OpenAIRE

Piton-Gonçalves,Jean; Aluísio,Sandra Maria

2015-01-01

Resumo O Teste Adaptativo Computadorizado Multidimensional (MCAT), baseado na Teoria de Resposta ao Item Multidimensional (MIRT), considera as múltiplas habilidades do examinado em testes educacionais. Nesse contexto, o presente artigo: (i) traz subsídios teóricos e metodológicos sobre MCATs com propósitos educacionais e (ii) aborda vantagens e desvantagens da aplicação em cenários educacionais. A revisão da literatura aponta que o MCAT é adeq...

Fat oxidation, hormonal and plasma metabolite kinetics during a submaximal incremental test in lean and obese adults.

Science.gov (United States)

Lanzi, Stefano; Codecasa, Franco; Cornacchia, Mauro; Maestrini, Sabrina; Salvadori, Alberto; Brunani, Amelia; Malatesta, Davide

2014-01-01

This study aimed to compare fat oxidation, hormonal and plasma metabolite kinetics during exercise in lean (L) and obese (O) men. Sixteen L and 16 O men [Body Mass Index (BMI): 22.9 ± 0.3 and 39.0 ± 1.4 kg · m(-2)] performed a submaximal incremental test (Incr) on a cycle-ergometer. Fat oxidation rates (FORs) were determined using indirect calorimetry. A sinusoidal model, including 3 independent variables (dilatation, symmetry, translation), was used to describe fat oxidation kinetics and determine the intensity (Fat(max)) eliciting maximal fat oxidation. Blood samples were drawn for the hormonal and plasma metabolite determination at each step of Incr. FORs (mg · FFM(-1) · min(-1)) were significantly higher from 20 to 30% of peak oxygen uptake (VO2peak) in O than in L and from 65 to 85% VO2peak in L than in O (p ≤ 0.05). FORs were similar in O and in L from 35 to 60% VO2peak. Fat max was 17% significantly lower in O than in L (poxidation kinetics were characterized by similar translation, significantly lower dilatation and left-shift symmetry in O compared with L (poxidation at high exercise intensities suggest that the difference in the fat oxidation kinetics is likely linked to impaired muscular capacity to oxidize NEFA in O. These results may have important implications for the appropriate exercise intensity prescription in training programs designed to optimize fat oxidation in O.

"Graded Cycling Test with Talk Test" Is a Reliable Test to Monitor Cardiovascular Fitness in Patients with Minor Stroke

DEFF Research Database (Denmark)

Steen Krawcyk, Rikke; Vinther, Anders; Caesar Petersen, Nicolas

2017-01-01

variability may challenge currently used cardiovascular monitoring. The Graded Cycling Test with Talk Test is a submaximal exercise test independent of heart rate variability, shown reliable for patients with cardiac disease. METHODS: Patients diagnosed with lacunar stroke according to TOAST (Trial of Org...... a minor measurement error: 12.9 W for groups of patients (standard error of measurement, SEM95) and 18.3 W for individual patients (smallest real difference). CONCLUSION: The "Graded Cycling Test with Talk Test" is feasible and reliable for monitoring exercise effects in patients with lacunar stroke...... 10172 in Acute Stroke Treatment) criteria performed an incremental exercise test on a stationary bicycle with a 15 W (watt) increase in workload every minute. Toward the end of each incremental step, the patients recited a standardized text passage and subsequently were asked: "Are you still able...

Software designs of image processing tasks with incremental refinement of computation.

Science.gov (United States)

Anastasia, Davide; Andreopoulos, Yiannis

2010-08-01

Software realizations of computationally-demanding image processing tasks (e.g., image transforms and convolution) do not currently provide graceful degradation when their clock-cycles budgets are reduced, e.g., when delay deadlines are imposed in a multitasking environment to meet throughput requirements. This is an important obstacle in the quest for full utilization of modern programmable platforms' capabilities since worst-case considerations must be in place for reasonable quality of results. In this paper, we propose (and make available online) platform-independent software designs performing bitplane-based computation combined with an incremental packing framework in order to realize block transforms, 2-D convolution and frame-by-frame block matching. The proposed framework realizes incremental computation: progressive processing of input-source increments improves the output quality monotonically. Comparisons with the equivalent nonincremental software realization of each algorithm reveal that, for the same precision of the result, the proposed approach can lead to comparable or faster execution, while it can be arbitrarily terminated and provide the result up to the computed precision. Application examples with region-of-interest based incremental computation, task scheduling per frame, and energy-distortion scalability verify that our proposal provides significant performance scalability with graceful degradation.

The Effects of Cells Temperature Increment and Variations of Irradiation for Monocrystalline Photovoltaic

Science.gov (United States)

Fuad Rahman Soeharto, Faishal; Hermawan

2017-04-01

Photovoltaic cell technology has been developed to meet the target of 17% Renewable Energy in 2025 accordance with Indonesia Government Regulation No. 5 2006. Photovoltaic cells are made of semiconductor materials, namely silicon or germanium (p-n junction). These cells need the light that comes from solar irradiation which brings energy photons to convert light energy into electrical energy. It is different from the solar heater that requires heat energy or thermal of sunlight that is normally used for drying or heating water. Photovoltaic cells requires energy photons to perform the energy conversion process, the photon energy can be derived from sunlight. Energy photon is taken from the sun light along with the advent of heat due to black-body radiation, which can lead to temperature increments of photovoltaic cells. Increment of 1°C can decreased photovoltaic cell voltage of up to 2.3 mV per cell. In this research, it will be discuss the analysis of the effect of rising temperatures and variations of irradiation on the type monocrystalline photovoltaic. Those variation are analyzed, simulated and experiment by using a module of experiment. The test results show that increment temperature from 25° C to 80° C at cell of photovoltaic decrease the output voltage of the photovoltaic cell at 4.21 V, and it also affect the power output of the cell which decreases up to 0.7523 Watt. In addition, the bigger the value of irradiation received by cell at amount of 1000 W / m2, produce more output power cells at the same temperature.

Uma avaliação de descritores de textura baseados em códigos binários locais para classificação de imagens de sensoriamento remoto

Directory of Open Access Journals (Sweden)

Marcelo Musci

Full Text Available O presente trabalho avalia descritores texturais multiescalares invariantes à rotação baseados em Padrões Binários Locais e em Quantização de Fase Local (LPQ para a classificação de uso e cobertura do solo em uma imagem IKONOS-2 e uma imagem Quickbird-2. Os experimentos mostraram que ambas as representações de textura propiciaram elevada acurácia quando combinadas com a informação de variância. Além disso, propõe-se no trabalho um novo descritor formado pela concatenação do histograma de variância e o histograma dos códigos gerados a partir dos Padrões Binários Locais ou da Quantização de Fase Local. Com o novo descritor, não obstante serem comparativamente mais compacto, registraram-se os mesmos índices de desempenho obtidos a partir de histogramas bidimensionais que representam a distribuição conjunta de ambas as variáveis. O último experimento realizado indicou para os descritores baseados nos Padrões Binários Locais ou na Quantização de Fase Local um índice Kappa superior em 0,1 ao que alcançou quando se utilizaram atributos de textura derivados da matriz de co-ocorrência.

Towards a multiconfigurational method of increments

Science.gov (United States)

Fertitta, E.; Koch, D.; Paulus, B.; Barcza, G.; Legeza, Ö.

2018-06-01

The method of increments (MoI) allows one to successfully calculate cohesive energies of bulk materials with high accuracy, but it encounters difficulties when calculating dissociation curves. The reason is that its standard formalism is based on a single Hartree-Fock (HF) configuration whose orbitals are localised and used for the many-body expansion. In situations where HF does not allow a size-consistent description of the dissociation, the MoI cannot be guaranteed to yield proper results either. Herein, we address the problem by employing a size-consistent multiconfigurational reference for the MoI formalism. This leads to a matrix equation where a coupling derived by the reference itself is employed. In principle, such an approach allows one to evaluate approximate values for the ground as well as excited states energies. While the latter are accurate close to the avoided crossing only, the ground state results are very promising for the whole dissociation curve, as shown by the comparison with density matrix renormalisation group benchmarks. We tested this two-state constant-coupling MoI on beryllium rings of different sizes and studied the error introduced by the constant coupling.

Evidence combination for incremental decision-making processes

NARCIS (Netherlands)

Berrada, Ghita; van Keulen, Maurice; de Keijzer, Ander

The establishment of a medical diagnosis is an incremental process highly fraught with uncertainty. At each step of this painstaking process, it may be beneficial to be able to quantify the uncertainty linked to the diagnosis and steadily update the uncertainty estimation using available sources of

Incremental Nonnegative Matrix Factorization for Face Recognition

Directory of Open Access Journals (Sweden)

Wen-Sheng Chen

2008-01-01

Full Text Available Nonnegative matrix factorization (NMF is a promising approach for local feature extraction in face recognition tasks. However, there are two major drawbacks in almost all existing NMF-based methods. One shortcoming is that the computational cost is expensive for large matrix decomposition. The other is that it must conduct repetitive learning, when the training samples or classes are updated. To overcome these two limitations, this paper proposes a novel incremental nonnegative matrix factorization (INMF for face representation and recognition. The proposed INMF approach is based on a novel constraint criterion and our previous block strategy. It thus has some good properties, such as low computational complexity, sparse coefficient matrix. Also, the coefficient column vectors between different classes are orthogonal. In particular, it can be applied to incremental learning. Two face databases, namely FERET and CMU PIE face databases, are selected for evaluation. Compared with PCA and some state-of-the-art NMF-based methods, our INMF approach gives the best performance.

Apparatus for electrical-assisted incremental forming and process thereof

Science.gov (United States)

Roth, John; Cao, Jian

2018-04-24

A process and apparatus for forming a sheet metal component using an electric current passing through the component. The process can include providing an incremental forming machine, the machine having at least one arcuate tipped tool and at least electrode spaced a predetermined distance from the arcuate tipped tool. The machine is operable to perform a plurality of incremental deformations on the sheet metal component using the arcuate tipped tool. The machine is also operable to apply an electric direct current through the electrode into the sheet metal component at the predetermined distance from the arcuate tipped tool while the machine is forming the sheet metal component.

Existing School Buildings: Incremental Seismic Retrofit Opportunities.

Science.gov (United States)

Federal Emergency Management Agency, Washington, DC.

The intent of this document is to provide technical guidance to school district facility managers for linking specific incremental seismic retrofit opportunities to specific maintenance and capital improvement projects. The linkages are based on logical affinities, such as technical fit, location of the work within the building, cost saving…

Evaluation of the magnetic and mechanical properties of reactor pressure vessel steels by incremental permeability change curve measurements

International Nuclear Information System (INIS)

Ebine, N.; Suzuki, M.

2001-01-01

Incremental permeability measurement was performed for two types of structural steels along with the magnetization of their hysteresis minor-loop. The obtained incremental permeability change curve has two sharp peaks, and the width between the two peaks is correlated with the coercivity. Hence the existence of good correlation was verified. On the basis of this result, nondestructive measurement experiments were carried out with planar coils to evaluate changes in the material properties of ferromagnetic structural steel plates. Changes in output voltages from planar coils with different test plates were correlated with their mechanical and magnetic properties. The correlation is so good that the measurement method adopted in this work could be used for nondestructive evaluation of material degradation in ferromagnetic structural steels. (author)

OTIMIZAÇÃO USANDO ALGORITMO GENÉTICO DE UM MODELO DE PROPAGÇÃO BASEADO EM EQUAÇÕES PARABÓLICAS

Directory of Open Access Journals (Sweden)

Antonio Carlos Vilanova

2013-01-01

Full Text Available Este artigo apresenta uma avaliação metodológica para otimizar parâmetros em um conhecido modelo de propagação de ondas de rádio na troposfera. O modelo de propagação é baseado no Divisor de passos de Fourier para resolver equações parabólicas. Nossa abordagem utiliza algoritmo genético para determinar os valores dos parâmetros que maximize a intensidade de campo em uma determinada posição do observador. Usando algoritmo genético o tempo necessário na busca dos parâmetros ótimos é reduzido significativamente. A avaliação preliminar dos resultados através da simulação mostra que a nossa abordagem é promissora.

Incremental prognostic value of coronary computed tomographic angiography high-risk plaque characteristics in newly symptomatic patients.

Science.gov (United States)

Fujimoto, Shinichiro; Kondo, Takeshi; Takamura, Kazuhisa; Baber, Usman; Shinozaki, Tomohiro; Nishizaki, Yuji; Kawaguchi, Yuko; Matsumori, Rie; Hiki, Makoto; Miyauchi, Katsumi; Daida, Hiroyuki; Hecht, Harvey; Stone, Gregg W; Narula, Jagat

2016-06-01

The incremental prognostic value of the plaque features in coronary computed tomographic angiography (CTA) has not been well assessed. This study was designed to determine whether CTA high-risk plaques have prognostic value incremental to the Framingham risk score (FRS) and the severity of luminal obstruction. A total of 628 newly symptomatic patients without known coronary artery disease underwent CTA. They were followed for a median of 677 days during which there were 26 cardiac events, including cardiac death, acute myocardial infarction, and hospitalization for unstable angina. Incremental prognostic value of adding plaque characteristics to the number of diseased vessels and the FRS was evaluated using 3 Cox models and net reclassification indexes. The discrimination index was significantly increased by adding the number of diseased vessels to the FRS (change in c-statistic from 65.8% to 78.6%, p=0.028) but not significantly by further adding plaque characteristics (change in c-statistic from 78.6% to 80.0%, p=0.812). However, improved model-fitting by adding plaque characteristics into the linear combination with risk score and the number of diseased vessels (p=0.007 from likelihood ratio test) and the lowest value of Akaike's information criteria of that model indicated that plaque characteristics improved both predictive accuracy and discrimination perspective. More subjects reclassified by plaque characteristics were moved to directions consistent with their subsequent cardiac event status than in an inconsistent direction. Evaluation of CTA plaque characteristics may provide incremental prognostic value to the number of diseased vessels and the FRS. Copyright © 2015 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

Demonstration/Validation of Incremental Sampling at Two Diverse Military Ranges and Development of an Incremental Sampling Tool

Science.gov (United States)

2010-06-01

Sampling (MIS)? • Technique of combining many increments of soil from a number of points within exposure area • Developed by Enviro Stat (Trademarked...Demonstrating a reliable soil sampling strategy to accurately characterize contaminant concentrations in spatially extreme and heterogeneous...into a set of decision (exposure) units • One or several discrete or small- scale composite soil samples collected to represent each decision unit

Ethical leadership: meta-analytic evidence of criterion-related and incremental validity.

Science.gov (United States)

Ng, Thomas W H; Feldman, Daniel C

2015-05-01

This study examines the criterion-related and incremental validity of ethical leadership (EL) with meta-analytic data. Across 101 samples published over the last 15 years (N = 29,620), we observed that EL demonstrated acceptable criterion-related validity with variables that tap followers' job attitudes, job performance, and evaluations of their leaders. Further, followers' trust in the leader mediated the relationships of EL with job attitudes and performance. In terms of incremental validity, we found that EL significantly, albeit weakly in some cases, predicted task performance, citizenship behavior, and counterproductive work behavior-even after controlling for the effects of such variables as transformational leadership, use of contingent rewards, management by exception, interactional fairness, and destructive leadership. The article concludes with a discussion of ways to strengthen the incremental validity of EL. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Incremental artificial bee colony with local search to economic dispatch problem with ramp rate limits and prohibited operating zones

International Nuclear Information System (INIS)

Özyön, Serdar; Aydin, Doğan

2013-01-01

Highlights: ► Prohibited operating zone economic dispatch problem has been solved by IABC-LS. ► The losses used in the solution of the problem have been computed by B-loss matrix. ► IABC-LS method has been applied to three test systems in literature. ► The values obtained by IABC and IABC-LS are better than the results in literature. - Abstract: In this study, prohibited operating zone economic power dispatch problem which considers ramp rate limit, has been solved by incremental artificial bee colony algorithm (IABC) and incremental artificial bee colony algorithm with local search (IABC-LS) methods. The transmission line losses used in the solution of the problem have been computed by B-loss matrix. IABC, IABC-LS methods have been applied to three different test systems in literature which consist of 6, 15 and 40 generators. The attained optimum solution values have been compared with the optimum results in literature and have been discussed.

Incremental Frequent Subgraph Mining on Large Evolving Graphs

KAUST Repository

Abdelhamid, Ehab; Canim, Mustafa; Sadoghi, Mohammad; Bhatta, Bishwaranjan; Chang, Yuan-Chi; Kalnis, Panos

2017-01-01

, such as social networks, utilize large evolving graphs. Mining these graphs using existing techniques is infeasible, due to the high computational cost. In this paper, we propose IncGM+, a fast incremental approach for continuous frequent subgraph mining problem

Mechanical Behavior of Red Sandstone under Incremental Uniaxial Cyclical Compressive and Tensile Loading

Directory of Open Access Journals (Sweden)

Baoyun Zhao

2017-01-01

Full Text Available Uniaxial experiments were carried out on red sandstone specimens to investigate their short-term and creep mechanical behavior under incremental cyclic compressive and tensile loading. First, based on the results of short-term uniaxial incremental cyclic compressive and tensile loading experiments, deformation characteristics and energy dissipation were analyzed. The results show that the stress-strain curve of red sandstone has an obvious memory effect in the compressive and tensile loading stages. The strains at peak stresses and residual strains increase with the cycle number. Energy dissipation, defined as the area of the hysteresis loop in the stress-strain curves, increases nearly in a power function with the cycle number. Creep test of the red sandstone was also conducted. Results show that the creep curve under each compressive or tensile stress level can be divided into decay and steady stages, which cannot be described by the conventional Burgers model. Therefore, an improved Burgers creep model of rock material is constructed through viscoplastic mechanics, which agrees very well with the experimental results and can describe the creep behavior of red sandstone better than the Burgers creep model.

Parallel Algorithm for Incremental Betweenness Centrality on Large Graphs

KAUST Repository

Jamour, Fuad Tarek

2017-10-17

Betweenness centrality quantifies the importance of nodes in a graph in many applications, including network analysis, community detection and identification of influential users. Typically, graphs in such applications evolve over time. Thus, the computation of betweenness centrality should be performed incrementally. This is challenging because updating even a single edge may trigger the computation of all-pairs shortest paths in the entire graph. Existing approaches cannot scale to large graphs: they either require excessive memory (i.e., quadratic to the size of the input graph) or perform unnecessary computations rendering them prohibitively slow. We propose iCentral; a novel incremental algorithm for computing betweenness centrality in evolving graphs. We decompose the graph into biconnected components and prove that processing can be localized within the affected components. iCentral is the first algorithm to support incremental betweeness centrality computation within a graph component. This is done efficiently, in linear space; consequently, iCentral scales to large graphs. We demonstrate with real datasets that the serial implementation of iCentral is up to 3.7 times faster than existing serial methods. Our parallel implementation that scales to large graphs, is an order of magnitude faster than the state-of-the-art parallel algorithm, while using an order of magnitude less computational resources.

Estimation of incremental reactivities for multiple day scenarios: an application to ethane and dimethyoxymethane

Science.gov (United States)

Stockwell, William R.; Geiger, Harald; Becker, Karl H.

Single-day scenarios are used to calculate incremental reactivities by definition (Carter, J. Air Waste Management Assoc. 44 (1994) 881-899.) but even unreactive organic compounds may have a non-negligible effect on ozone concentrations if multiple-day scenarios are considered. The concentration of unreactive compounds and their products may build up over a multiple-day period and the oxidation products may be highly reactive or highly unreactive affecting the overall incremental reactivity of the organic compound. We have developed a method for calculating incremental reactivities for multiple days based on a standard scenario for polluted European conditions. This method was used to estimate maximum incremental reactivities (MIR) and maximum ozone incremental reactivities (MOIR) for ethane and dimethyoxymethane for scenarios ranging from 1 to 6 days. It was found that the incremental reactivities increased as the length of the simulation period increased. The MIR of ethane increased faster than the value for dimethyoxymethane as the scenarios became longer. The MOIRs of ethane and dimethyoxymethane increased but the change was more modest for scenarios longer than 3 days. MOIRs of both volatile organic compounds were equal within the uncertainties of their chemical mechanisms by the 5 day scenario. These results show that dimethyoxymethane has an ozone forming potential on a per mass basis that is only somewhat greater than ethane if multiple-day scenarios are considered.

[Incremental cost effectiveness of multifocal cataract surgery].

Science.gov (United States)

Pagel, N; Dick, H B; Krummenauer, F

2007-02-01

Supplementation of cataract patients with multifocal intraocular lenses involves an additional financial investment when compared to the corresponding monofocal supplementation, which usually is not funded by German health care insurers. In the context of recent resource allocation discussions, however, the cost effectiveness of multifocal cataract surgery could become an important rationale. Therefore an evidence-based estimation of its cost effectiveness was carried out. Three independent meta-analyses were implemented to estimate the gain in uncorrected near visual acuity and best corrected visual acuity (vision lines) as well as the predictability (fraction of patients without need for reading aids) of multifocal supplementation. Study reports published between 1995 and 2004 (English or German language) were screened for appropriate key words. Meta effects in visual gain and predictability were estimated by means and standard deviations of the reported effect measures. Cost data were estimated by German DRG rates and individual lens costs; the cost effectiveness of multifocal cataract surgery was then computed in terms of its marginal cost effectiveness ratio (MCER) for each clinical benefit endpoint; the incremental costs of multifocal versus monofocal cataract surgery were further estimated by means of their respective incremental cost effectiveness ratio (ICER). An independent meta-analysis estimated the complication profiles to be expected after monofocal and multifocal cataract surgery in order to evaluate expectable complication-associated additional costs of both procedures; the marginal and incremental cost effectiveness estimates were adjusted accordingly. A sensitivity analysis comprised cost variations of +/- 10 % and utility variations alongside the meta effect estimate's 95 % confidence intervals. Total direct costs from the health care insurer's perspective were estimated 3363 euro, associated with a visual meta benefit in best corrected visual

Lactate and ammonia concentration in blood and sweat during incremental cycle ergometer exercise

NARCIS (Netherlands)

Ament, W; Huizenga, [No Value; Mook, GA; Gips, CH; Verkerke, GJ

It is known that the concentrations of ammonia and lactate in blood increase during incremental exercise. Sweat also contains lactate and ammonia. The aim of the present study was to investigate the physiological response of lactate and ammonia in plasma and sweat during a stepwise incremental cycle

Potential stocks and increments of woody biomass in the European Union under different management and climate scenarios.

Science.gov (United States)

Kindermann, Georg E; Schörghuber, Stefan; Linkosalo, Tapio; Sanchez, Anabel; Rammer, Werner; Seidl, Rupert; Lexer, Manfred J

2013-02-01

Forests play an important role in the global carbon flow. They can store carbon and can also provide wood which can substitute other materials. In EU27 the standing biomass is steadily increasing. Increments and harvests seem to have reached a plateau between 2005 and 2010. One reason for reaching this plateau will be the circumstance that the forests are getting older. High ages have the advantage that they typical show high carbon concentration and the disadvantage that the increment rates are decreasing. It should be investigated how biomass stock, harvests and increments will develop under different climate scenarios and two management scenarios where one is forcing to store high biomass amounts in forests and the other tries to have high increment rates and much harvested wood. A management which is maximising standing biomass will raise the stem wood carbon stocks from 30 tC/ha to 50 tC/ha until 2100. A management which is maximising increments will lower the stock to 20 tC/ha until 2100. The estimates for the climate scenarios A1b, B1 and E1 are different but there is much more effect by the management target than by the climate scenario. By maximising increments the harvests are 0.4 tC/ha/year higher than in the management which maximises the standing biomass. The increments until 2040 are close together but around 2100 the increments when maximising standing biomass are approximately 50 % lower than those when maximising increments. Cold regions will benefit from the climate changes in the climate scenarios by showing higher increments. The results of this study suggest that forest management should maximise increments, not stocks to be more efficient in sense of climate change mitigation. This is true especially for regions which have already high carbon stocks in forests, what is the case in many regions in Europe. During the time span 2010-2100 the forests of EU27 will absorb additional 1750 million tC if they are managed to maximise increments compared

Scalable, incremental learning with MapReduce parallelization for cell detection in high-resolution 3D microscopy data

KAUST Repository

Sung, Chul

2013-08-01

Accurate estimation of neuronal count and distribution is central to the understanding of the organization and layout of cortical maps in the brain, and changes in the cell population induced by brain disorders. High-throughput 3D microscopy techniques such as Knife-Edge Scanning Microscopy (KESM) are enabling whole-brain survey of neuronal distributions. Data from such techniques pose serious challenges to quantitative analysis due to the massive, growing, and sparsely labeled nature of the data. In this paper, we present a scalable, incremental learning algorithm for cell body detection that can address these issues. Our algorithm is computationally efficient (linear mapping, non-iterative) and does not require retraining (unlike gradient-based approaches) or retention of old raw data (unlike instance-based learning). We tested our algorithm on our rat brain Nissl data set, showing superior performance compared to an artificial neural network-based benchmark, and also demonstrated robust performance in a scenario where the data set is rapidly growing in size. Our algorithm is also highly parallelizable due to its incremental nature, and we demonstrated this empirically using a MapReduce-based implementation of the algorithm. We expect our scalable, incremental learning approach to be widely applicable to medical imaging domains where there is a constant flux of new data. © 2013 IEEE.

Quantification of baseline pupillary response and task-evoked pupillary response during constant and incremental task load.

Science.gov (United States)

Mosaly, Prithima R; Mazur, Lukasz M; Marks, Lawrence B

2017-10-01

The methods employed to quantify the baseline pupil size and task-evoked pupillary response (TEPR) may affect the overall study results. To test this hypothesis, the objective of this study was to assess variability in baseline pupil size and TEPR during two basic working memory tasks: constant load of 3-letters memorisation-recall (10 trials), and incremental load memorisation-recall (two trials of each load level), using two commonly used methods (1) change from trail/load specific baseline, (2) change from constant baseline. Results indicated that there was a significant shift in baseline between the trails for constant load, and between the load levels for incremental load. The TEPR was independent of shifts in baseline using method 1 only for constant load, and method 2 only for higher levels of incremental load condition. These important findings suggest that the assessment of both the baseline and methods to quantify TEPR are critical in ergonomics application, especially in studies with small number of trials per subject per condition. Practitioner Summary: Quantification of TEPR can be affected by shifts in baseline pupil size that are most likely affected by non-cognitive factors when other external factors are kept constant. Therefore, quantification methods employed to compute both baseline and TEPR are critical in understanding the information processing of humans in practical ergonomics settings.

PCA/INCREMENT MEMORY interface for analog processors on-line with PC-XT/AT IBM

International Nuclear Information System (INIS)

Biri, S.; Buttsev, V.S.; Molnar, J.; Samojlov, V.N.

1989-01-01

The functional and operational descriptions on PCA/INCREMENT MEMORY interface are discussed. The following is solved with this unit: connection between the analogue signal processor and PC, nuclear spectrum acquisition up to 2 24 -1 counts/channel using increment or decrement method, data read/write from or to memory via data bus PC during the spectrum acquisition. Dual ported memory organization is 4096x24 bit, increment cycle time at 4.77 MHz system clock frequency is 1.05 μs. 6 refs.; 2 figs

Playing by the rules? Analysing incremental urban developments

NARCIS (Netherlands)

Karnenbeek, van Lilian; Janssen-Jansen, Leonie

2018-01-01

Current urban developments are often considered outdated and static, and the argument follows that they should become more adaptive. In this paper, we argue that existing urban development are already adaptive and incremental. Given this flexibility in urban development, understanding changes in the

Alternatives to the Six-Minute Walk Test in Pulmonary Arterial Hypertension

OpenAIRE

Mainguy, Vincent; Malenfant, Simon; Neyron, Anne-Sophie; Saey, Didier; Maltais, François; Bonnet, Sébastien; Provencher, Steeve

2014-01-01

INTRODUCTION: The physiological response during the endurance shuttle walk test (ESWT), the cycle endurance test (CET) and the incremental shuttle walk test (ISWT) remains unknown in PAH. We tested the hypothesis that endurance tests induce a near-maximal physiological demand comparable to incremental tests. We also hypothesized that differences in respiratory response during exercise would be related to the characteristics of the exercise tests. METHODS: Within two weeks, twenty-one PAH pati...

A program for the numerical control of a pulse increment system

Energy Technology Data Exchange (ETDEWEB)

Gray, D.C.

1963-08-21

This report will describe the important features of the development of magnetic tapes for the numerical control of a pulse-increment system consisting of a modified Gorton lathe and its associated control unit developed by L. E. Foley of Equipment Development Service, Engineering Services, General Electric Co., Schenectady, N.Y. Included is a description of CUPID (Control and Utilization of Pulse Increment Devices), a FORTRAN program for the design of these tapes on the IBM 7090 computer, and instructions for its operation.

BMI and BMI SDS in childhood: annual increments and conditional change

OpenAIRE

Brannsether-Ellingsen, Bente; Eide, Geir Egil; Roelants, Mathieu; Bjerknes, Robert; Juliusson, Petur Benedikt

2016-01-01

Background: Early detection of abnormal weight gain in childhood may be important for preventive purposes. It is still debated which annual changes in BMI should warrant attention. Aim: To analyse 1-year increments of Body Mass Index (BMI) and standardised BMI (BMI SDS) in childhood and explore conditional change in BMI SDS as an alternative method to evaluate 1-year changes in BMI. Subjects and methods: The distributions of 1-year increments of BMI (kg/m2) and BMI SDS are summarised by...

Effect of different cycling frequencies during incremental exercise on the venous plasma potassium concentration in humans.

Science.gov (United States)

Zoladz, J A; Duda, K; Majerczak, J; Thor, P

2002-01-01

The effect of different muscle shortening velocity was studied during cycling at a pedalling rate of 60 and 120 rev.min(-1) on the [K+]v in humans. Twenty-one healthy young men aged 22.5+/-2.2 years, body mass 72.7+/-6.4 kg, VO2 max 3.720+/-0.426 l. min(-1), performed an incremental exercise test until exhaustion. The power output increased by 30 W every 3 min, using an electrically controlled ergometer Ergoline 800 S (see Zoladz et al. J. Physiol. 488: 211-217, 1995). The test was performed twice: once at a cycling frequency of 60 rev.min(-1) (test A) and a few days later at a frequency of 120 rev. min(-1) (test B). At rest and at the end of each step (i.e. the last 15 s) antecubital venous blood samples for [K+]p were taken. Gas exchange variables were measured continuously (breath-by-breath) using Oxycon Champion Jaeger. The pre-exercise [K+]v in both tests was not significantly different amounting to 4.24+/-0.36 mmol.l(-1) in test A, and 4.37+/-0.45 mmol.l(-1) in test B. However, the [K+]p during cycling at 120 rev. min(-1) was significantly higher (p<0.001, ANOVA for repeated measurements) at each power output when compared to cycling at 60 rev.min(-1). The maximal power output reached 293+/-31 W in test A which was significantly higher (p<0.001) than in test B, which amounted to 223+/-40 W. The VO2max values in both tests reached 3.720+/-0.426 l. min(-1) vs 3.777+/-0.514 l. min(-1). These values were not significantly different. When the [K+]v was measured during incremental cycling exercise, a linear increase in [K+]v was observed in both tests. However, a significant (p<0.05) upward shift in the [K+]v and a % VO2max relationship was detected during cycling at 120 rev.min(-1). The [K+]v measured at the VO2max level in tests A and B amounted to 6.00+/-0.47 mmol.l-1 vs 6.04+/-0.41 mmol.l-1, respectively. This difference was not significant. It may thus be concluded that: a) generation of the same external mechanical power output during cycling at a pedalling

Decoupled Simulation Method For Incremental Sheet Metal Forming

International Nuclear Information System (INIS)

Sebastiani, G.; Brosius, A.; Tekkaya, A. E.; Homberg, W.; Kleiner, M.

2007-01-01

Within the scope of this article a decoupling algorithm to reduce computing time in Finite Element Analyses of incremental forming processes will be investigated. Based on the given position of the small forming zone, the presented algorithm aims at separating a Finite Element Model in an elastic and an elasto-plastic deformation zone. Including the elastic response of the structure by means of model simplifications, the costly iteration in the elasto-plastic zone can be restricted to the small forming zone and to few supporting elements in order to reduce computation time. Since the forming zone moves along the specimen, an update of both, forming zone with elastic boundary and supporting structure, is needed after several increments.The presented paper discusses the algorithmic implementation of the approach and introduces several strategies to implement the denoted elastic boundary condition at the boundary of the plastic forming zone

Automobile sheet metal part production with incremental sheet forming

Directory of Open Access Journals (Sweden)

İsmail DURGUN

2016-02-01

Full Text Available Nowadays, effect of global warming is increasing drastically so it leads to increased interest on energy efficiency and sustainable production methods. As a result of adverse conditions, national and international project platforms, OEMs (Original Equipment Manufacturers, SMEs (Small and Mid-size Manufacturers perform many studies or improve existing methodologies in scope of advanced manufacturing techniques. In this study, advanced manufacturing and sustainable production method "Incremental Sheet Metal Forming (ISF" was used for sheet metal forming process. A vehicle fender was manufactured with or without die by using different toolpath strategies and die sets. At the end of the study, Results have been investigated under the influence of method and parameters used.Keywords: Template incremental sheet metal, Metal forming

Incremental net social benefit associated with using nuclear-fueled power plants

International Nuclear Information System (INIS)

Maoz, I.

1976-12-01

The incremental net social benefit (INSB) resulting from nuclear-fueled, rather than coal-fired, electric power generation is assessed. The INSB is defined as the difference between the 'incremental social benefit' (ISB)--caused by the cheaper technology of electric power generation, and the 'incremental social cost' (ISC)--associated with an increased power production, which is induced by cheaper technology. Section 2 focuses on the theoretical and empirical problems associated with the assessment of the long-run price elasticity of the demand for electricity, and the theoretical-econometric considerations that lead to the reasonable estimates of price elasticities of demand from those provided by recent empirical studies. Section 3 covers the theoretical and empirical difficulties associated with the construction of the long-run social marginal cost curves (LRSMC) of electricity. Sections 4 and 5 discuss the assessment methodology and provide numerical examples for the calculation of the INSB resulting from nuclear-fueled power generation

Heidegger: o estudo dos fenômenos humanos baseados na existência humana como ser-aí (Dasein

Directory of Open Access Journals (Sweden)

Ida Elizabeth Cardinalli

2015-08-01

Full Text Available O presente artigo pretende esclarecer a posição crítica do filósofo Martin Heidegger, explicitada no livro Seminários de Zollikon, em relação à transposição do método da ciência natural moderna para o estudo dos fenômenos humanos e apresentar sua proposição de um método mais pertinente ao estudo da existência humana. O autor propõe indicações de um método baseado na compreensão do existir humano como "ser-aí" e "ser-no-mundo" e também nos existenciais descritos em Ser e tempo, tais como espacialidade, temporalidade, ser-com-o-outro e corporeidade. Ao mesmo tempo, destaca que os fenômenos humanos não deveriam ser submetidos e circunscritos às descrições ontológicas dos existenciais, quando o método visa ao esclarecimento das experiências específicas e singulares de cada ser humano.

On the validity of the incremental approach to estimate the impact of cities on air quality

Science.gov (United States)

Thunis, Philippe

2018-01-01

The question of how much cities are the sources of their own air pollution is not only theoretical as it is critical to the design of effective strategies for urban air quality planning. In this work, we assess the validity of the commonly used incremental approach to estimate the likely impact of cities on their air pollution. With the incremental approach, the city impact (i.e. the concentration change generated by the city emissions) is estimated as the concentration difference between a rural background and an urban background location, also known as the urban increment. We show that the city impact is in reality made up of the urban increment and two additional components and consequently two assumptions need to be fulfilled for the urban increment to be representative of the urban impact. The first assumption is that the rural background location is not influenced by emissions from within the city whereas the second requires that background concentration levels, obtained with zero city emissions, are equal at both locations. Because the urban impact is not measurable, the SHERPA modelling approach, based on a full air quality modelling system, is used in this work to assess the validity of these assumptions for some European cities. Results indicate that for PM2.5, these two assumptions are far from being fulfilled for many large or medium city sizes. For this type of cities, urban increments are largely underestimating city impacts. Although results are in better agreement for NO2, similar issues are met. In many situations the incremental approach is therefore not an adequate estimate of the urban impact on air pollution. This poses issues in terms of interpretation when these increments are used to define strategic options in terms of air quality planning. We finally illustrate the interest of comparing modelled and measured increments to improve our confidence in the model results.

Bipower variation for Gaussian processes with stationary increments

DEFF Research Database (Denmark)

Barndorff-Nielsen, Ole Eiler; Corcuera, José Manuel; Podolskij, Mark

2009-01-01

Convergence in probability and central limit laws of bipower variation for Gaussian processes with stationary increments and for integrals with respect to such processes are derived. The main tools of the proofs are some recent powerful techniques of Wiener/Itô/Malliavin calculus for establishing...

The National Institute of Education and Incremental Budgeting.

Science.gov (United States)

Hastings, Anne H.

1979-01-01

The National Institute of Education's (NIE) history demonstrates that the relevant criteria for characterizing budgeting as incremental are not the predictability and stability of appropriations but the conditions of complexity, limited information, multiple factors, and imperfect agreement on ends; NIE's appropriations were dominated by political…

Incremental Support Vector Machine Framework for Visual Sensor Networks

Directory of Open Access Journals (Sweden)

Yuichi Motai

2007-01-01

Full Text Available Motivated by the emerging requirements of surveillance networks, we present in this paper an incremental multiclassification support vector machine (SVM technique as a new framework for action classification based on real-time multivideo collected by homogeneous sites. The technique is based on an adaptation of least square SVM (LS-SVM formulation but extends beyond the static image-based learning of current SVM methodologies. In applying the technique, an initial supervised offline learning phase is followed by a visual behavior data acquisition and an online learning phase during which the cluster head performs an ensemble of model aggregations based on the sensor nodes inputs. The cluster head then selectively switches on designated sensor nodes for future incremental learning. Combining sensor data offers an improvement over single camera sensing especially when the latter has an occluded view of the target object. The optimization involved alleviates the burdens of power consumption and communication bandwidth requirements. The resulting misclassification error rate, the iterative error reduction rate of the proposed incremental learning, and the decision fusion technique prove its validity when applied to visual sensor networks. Furthermore, the enabled online learning allows an adaptive domain knowledge insertion and offers the advantage of reducing both the model training time and the information storage requirements of the overall system which makes it even more attractive for distributed sensor networks communication.

A variable-gain transimpedance amplifier for MEMS-based oscillators = : Um amplificador de transimpedância de ganho variável para aplicação em osciladores baseados em MEMS

OpenAIRE

Pedro Emiliano Paro Filho

2012-01-01

Resumo: Um amplificador de transimpedância (TIA) de ganho variável é apresentado. Implementado em tecnologia 0,18 'mi'm, o projeto relatado possui a finalidade de prover um amplificador de sustentação para osciladores baseados em ressonadores do tipo MEMS (Micro-Electro-Mechanical System). Entre outros, as peculiaridades de projeto envolvem um desafiante compromisso entre Ganho, Largura de Banda, Ruído e Consumo de potência. Sendo assim, o amplificador foi implementado através do cascateament...

A comparative study of velocity increment generation between the rigid body and flexible models of MMET

Energy Technology Data Exchange (ETDEWEB)

Ismail, Norilmi Amilia, E-mail: aenorilmi@usm.my [School of Aerospace Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Pulau Pinang (Malaysia)

2016-02-01

The motorized momentum exchange tether (MMET) is capable of generating useful velocity increments through spin–orbit coupling. This study presents a comparative study of the velocity increments between the rigid body and flexible models of MMET. The equations of motions of both models in the time domain are transformed into a function of true anomaly. The equations of motion are integrated, and the responses in terms of the velocity increment of the rigid body and flexible models are compared and analysed. Results show that the initial conditions, eccentricity, and flexibility of the tether have significant effects on the velocity increments of the tether.

Minimizing System Modification in an Incremental Design Approach

DEFF Research Database (Denmark)

Pop, Paul; Eles, Petru; Pop, Traian

2001-01-01

In this paper we present an approach to mapping and scheduling of distributed embedded systems for hard real-time applications, aiming at minimizing the system modification cost. We consider an incremental design process that starts from an already existing sys-tem running a set of applications. We...

EFFECT OF COST INCREMENT DISTRIBUTION PATTERNS ON THE PERFORMANCE OF JIT SUPPLY CHAIN

Directory of Open Access Journals (Sweden)

Ayu Bidiawati J.R

2008-01-01

Full Text Available Cost is an important consideration in supply chain (SC optimisation. This is due to emphasis placed on cost reduction in order to optimise profit. Some researchers use cost as one of their performance measures and others propose ways of accurately calculating cost. As product moves across SC, the product cost also increases. This paper studied the effect of cost increment distribution patterns on the performance of a JIT Supply Chain. In particular, it is necessary to know if inventory allocation across SC needs to be modified to accommodate different cost increment distribution patterns. It was found that funnel is still the best card distribution pattern for JIT-SC regardless the cost increment distribution patterns used.

BMI and BMI SDS in childhood: annual increments and conditional change.

Science.gov (United States)

Brannsether, Bente; Eide, Geir Egil; Roelants, Mathieu; Bjerknes, Robert; Júlíusson, Pétur Benedikt

2017-02-01

Background Early detection of abnormal weight gain in childhood may be important for preventive purposes. It is still debated which annual changes in BMI should warrant attention. Aim To analyse 1-year increments of Body Mass Index (BMI) and standardised BMI (BMI SDS) in childhood and explore conditional change in BMI SDS as an alternative method to evaluate 1-year changes in BMI. Subjects and methods The distributions of 1-year increments of BMI (kg/m 2 ) and BMI SDS are summarised by percentiles. Differences according to sex, age, height, weight, initial BMI and weight status on the BMI and BMI SDS increments were assessed with multiple linear regression. Conditional change in BMI SDS was based on the correlation between annual BMI measurements converted to SDS. Results BMI increments depended significantly on sex, height, weight and initial BMI. Changes in BMI SDS depended significantly only on the initial BMI SDS. The distribution of conditional change in BMI SDS using a two-correlation model was close to normal (mean = 0.11, SD = 1.02, n = 1167), with 3.2% (2.3-4.4%) of the observations below -2 SD and 2.8% (2.0-4.0%) above +2 SD. Conclusion Conditional change in BMI SDS can be used to detect unexpected large changes in BMI SDS. Although this method requires the use of a computer, it may be clinically useful to detect aberrant weight development.

Relating annual increments of the endangered Blanding's turtle plastron growth to climate.

Science.gov (United States)

Richard, Monik G; Laroque, Colin P; Herman, Thomas B

2014-05-01

This research is the first published study to report a relationship between climate variables and plastron growth increments of turtles, in this case the endangered Nova Scotia Blanding's turtle (Emydoidea blandingii). We used techniques and software common to the discipline of dendrochronology to successfully cross-date our growth increment data series, to detrend and average our series of 80 immature Blanding's turtles into one common chronology, and to seek correlations between the chronology and environmental temperature and precipitation variables. Our cross-dated chronology had a series intercorrelation of 0.441 (above 99% confidence interval), an average mean sensitivity of 0.293, and an average unfiltered autocorrelation of 0.377. Our master chronology represented increments from 1975 to 2007 (33 years), with index values ranging from a low of 0.688 in 2006 to a high of 1.303 in 1977. Univariate climate response function analysis on mean monthly air temperature and precipitation values revealed a positive correlation with the previous year's May temperature and current year's August temperature; a negative correlation with the previous year's October temperature; and no significant correlation with precipitation. These techniques for determining growth increment response to environmental variables should be applicable to other turtle species and merit further exploration.

Incremental Validity of the Trait Emotional Intelligence Questionnaire-Short Form (TEIQue-SF).

Science.gov (United States)

Siegling, A B; Vesely, Ashley K; Petrides, K V; Saklofske, Donald H

2015-01-01

This study examined the incremental validity of the adult short form of the Trait Emotional Intelligence Questionnaire (TEIQue-SF) in predicting 7 construct-relevant criteria beyond the variance explained by the Five-factor model and coping strategies. Additionally, the relative contributions of the questionnaire's 4 subscales were assessed. Two samples of Canadian university students completed the TEIQue-SF, along with measures of the Big Five, coping strategies (Sample 1 only), and emotion-laden criteria. The TEIQue-SF showed consistent incremental effects beyond the Big Five or the Big Five and coping strategies, predicting all 7 criteria examined across the 2 samples. Furthermore, 2 of the 4 TEIQue-SF subscales accounted for the measure's incremental validity. Although the findings provide good support for the validity and utility of the TEIQue-SF, directions for further research are emphasized.

Investigating the improvement of decoding abilities and working memory in children with Incremental or Entity personal conceptions of intelligence: two case reports

Directory of Open Access Journals (Sweden)

Marianna eAlesi

2016-01-01

Full Text Available One of the most significant current discussions has led to the hypothesis that domain-specific training programs alone are not enough to improve reading achievement or working memory abilities. Incremental or Entity personal conceptions of intelligence may be assumed to be an important prognostic factor to overcome domain-specific deficits. Specifically, incremental students tend to be more oriented toward change and autonomy and to adopt more efficacious strategies. This study aims at examining the efficacy of a multidimensional intervention program to improve decoding abilities and working memory. Participants were two children (M age = 10 yr. with developmental dyslexia and different conceptions of intelligence.Children were tested on a whole battery of reading and spelling tests commonly used in the assessment of reading disabilities in Italy. Then, they were given a multimedia test to measure motivational factors such as conceptions of intelligence and achievement goalsChildren took part in the T.I.R.D. Multimedia Training for the Rehabilitation of Dyslexia (Rappo & Pepi, 2010 reinforced by specific units to improve verbal working memory for three months. This training consisted of specific tasks to rehabilitate both visual and phonological strategies (sound blending, word segmentation, alliteration test and rhyme test, letter recognition, digraph recognition, trigraph recognition and word recognition are samples of visual tasks and verbal working memory (rapid words and non-words recognition.Posttest evaluations showed that the child holding the incremental theory of intelligence improved more than the child holding a static representation.On the whole this study highlights the importance of treatment programs in which account is taken of both specificity of deficits and motivational factors. There is a need to plan multifaceted intervention programs based on a transverse approach, looking at both cognitive and motivational factors.

Investigating the Improvement of Decoding Abilities and Working Memory in Children with Incremental or Entity Personal Conceptions of Intelligence: Two Case Reports

Science.gov (United States)

Alesi, Marianna; Rappo, Gaetano; Pepi, Annamaria

2016-01-01

One of the most significant current discussions has led to the hypothesis that domain-specific training programs alone are not enough to improve reading achievement or working memory abilities. Incremental or Entity personal conceptions of intelligence may be assumed to be an important prognostic factor to overcome domain-specific deficits. Specifically, incremental students tend to be more oriented toward change and autonomy and are able to adopt more efficacious strategies. This study aims at examining the effect of personal conceptions of intelligence to strengthen the efficacy of a multidimensional intervention program in order to improve decoding abilities and working memory. Participants included two children (M age = 10 years) with developmental dyslexia and different conceptions of intelligence. The children were tested on a whole battery of reading and spelling tests commonly used in the assessment of reading disabilities in Italy. Afterwards, they were given a multimedia test to measure motivational factors such as conceptions of intelligence and achievement goals. The children took part in the T.I.R.D. Multimedia Training for the Rehabilitation of Dyslexia (Rappo and Pepi, 2010) reinforced by specific units to improve verbal working memory for 3 months. This training consisted of specific tasks to rehabilitate both visual and phonological strategies (sound blending, word segmentation, alliteration test and rhyme test, letter recognition, digraph recognition, trigraph recognition, and word recognition as samples of visual tasks) and verbal working memory (rapid words and non-words recognition). Posttest evaluations showed that the child holding the incremental theory of intelligence improved more than the child holding a static representation. On the whole this study highlights the importance of treatment programs in which both specificity of deficits and motivational factors are both taken into account. There is a need to plan multifaceted intervention

Learning in Different Modes: The Interaction Between Incremental and Radical Change

DEFF Research Database (Denmark)

Petersen, Anders Hedegaard; Boer, Harry; Gertsen, Frank

2004-01-01

The objective of the study presented in this article is to contribute to the development of theory on continuous innovation, i.e. the combination of operationally effective exploitation and strategically flexible exploration. A longitudinal case study is presented of the interaction between...... incremental and radical change in Danish company, observed through the lens of organizational learning. The radical change process is described in five phases, each of which had its own effects on incremental change initiatives in the company. The research identified four factors explaining these effects, all...

Two models of minimalist, incremental syntactic analysis.

Science.gov (United States)

Stabler, Edward P

2013-07-01

Minimalist grammars (MGs) and multiple context-free grammars (MCFGs) are weakly equivalent in the sense that they define the same languages, a large mildly context-sensitive class that properly includes context-free languages. But in addition, for each MG, there is an MCFG which is strongly equivalent in the sense that it defines the same language with isomorphic derivations. However, the structure-building rules of MGs but not MCFGs are defined in a way that generalizes across categories. Consequently, MGs can be exponentially more succinct than their MCFG equivalents, and this difference shows in parsing models too. An incremental, top-down beam parser for MGs is defined here, sound and complete for all MGs, and hence also capable of parsing all MCFG languages. But since the parser represents its grammar transparently, the relative succinctness of MGs is again evident. Although the determinants of MG structure are narrowly and discretely defined, probabilistic influences from a much broader domain can influence even the earliest analytic steps, allowing frequency and context effects to come early and from almost anywhere, as expected in incremental models. Copyright © 2013 Cognitive Science Society, Inc.

Towards Reliable and Energy-Efficient Incremental Cooperative Communication for Wireless Body Area Networks.

Science.gov (United States)

Yousaf, Sidrah; Javaid, Nadeem; Qasim, Umar; Alrajeh, Nabil; Khan, Zahoor Ali; Ahmed, Mansoor

2016-02-24

In this study, we analyse incremental cooperative communication for wireless body area networks (WBANs) with different numbers of relays. Energy efficiency (EE) and the packet error rate (PER) are investigated for different schemes. We propose a new cooperative communication scheme with three-stage relaying and compare it to existing schemes. Our proposed scheme provides reliable communication with less PER at the cost of surplus energy consumption. Analytical expressions for the EE of the proposed three-stage cooperative communication scheme are also derived, taking into account the effect of PER. Later on, the proposed three-stage incremental cooperation is implemented in a network layer protocol; enhanced incremental cooperative critical data transmission in emergencies for static WBANs (EInCo-CEStat). Extensive simulations are conducted to validate the proposed scheme. Results of incremental relay-based cooperative communication protocols are compared to two existing cooperative routing protocols: cooperative critical data transmission in emergencies for static WBANs (Co-CEStat) and InCo-CEStat. It is observed from the simulation results that incremental relay-based cooperation is more energy efficient than the existing conventional cooperation protocol, Co-CEStat. The results also reveal that EInCo-CEStat proves to be more reliable with less PER and higher throughput than both of the counterpart protocols. However, InCo-CEStat has less throughput with a greater stability period and network lifetime. Due to the availability of more redundant links, EInCo-CEStat achieves a reduced packet drop rate at the cost of increased energy consumption.

Multiobjective memetic estimation of distribution algorithm based on an incremental tournament local searcher.

Science.gov (United States)

Yang, Kaifeng; Mu, Li; Yang, Dongdong; Zou, Feng; Wang, Lei; Jiang, Qiaoyong

2014-01-01

A novel hybrid multiobjective algorithm is presented in this paper, which combines a new multiobjective estimation of distribution algorithm, an efficient local searcher and ε-dominance. Besides, two multiobjective problems with variable linkages strictly based on manifold distribution are proposed. The Pareto set to the continuous multiobjective optimization problems, in the decision space, is a piecewise low-dimensional continuous manifold. The regularity by the manifold features just build probability distribution model by globally statistical information from the population, yet, the efficiency of promising individuals is not well exploited, which is not beneficial to search and optimization process. Hereby, an incremental tournament local searcher is designed to exploit local information efficiently and accelerate convergence to the true Pareto-optimal front. Besides, since ε-dominance is a strategy that can make multiobjective algorithm gain well distributed solutions and has low computational complexity, ε-dominance and the incremental tournament local searcher are combined here. The novel memetic multiobjective estimation of distribution algorithm, MMEDA, was proposed accordingly. The algorithm is validated by experiment on twenty-two test problems with and without variable linkages of diverse complexities. Compared with three state-of-the-art multiobjective optimization algorithms, our algorithm achieves comparable results in terms of convergence and diversity metrics.

Multiobjective Memetic Estimation of Distribution Algorithm Based on an Incremental Tournament Local Searcher

Directory of Open Access Journals (Sweden)

Kaifeng Yang

2014-01-01

Full Text Available A novel hybrid multiobjective algorithm is presented in this paper, which combines a new multiobjective estimation of distribution algorithm, an efficient local searcher and ε-dominance. Besides, two multiobjective problems with variable linkages strictly based on manifold distribution are proposed. The Pareto set to the continuous multiobjective optimization problems, in the decision space, is a piecewise low-dimensional continuous manifold. The regularity by the manifold features just build probability distribution model by globally statistical information from the population, yet, the efficiency of promising individuals is not well exploited, which is not beneficial to search and optimization process. Hereby, an incremental tournament local searcher is designed to exploit local information efficiently and accelerate convergence to the true Pareto-optimal front. Besides, since ε-dominance is a strategy that can make multiobjective algorithm gain well distributed solutions and has low computational complexity, ε-dominance and the incremental tournament local searcher are combined here. The novel memetic multiobjective estimation of distribution algorithm, MMEDA, was proposed accordingly. The algorithm is validated by experiment on twenty-two test problems with and without variable linkages of diverse complexities. Compared with three state-of-the-art multiobjective optimization algorithms, our algorithm achieves comparable results in terms of convergence and diversity metrics.

Effect of multiple forming tools on geometrical and mechanical properties in incremental sheet forming

Science.gov (United States)

Wernicke, S.; Dang, T.; Gies, S.; Tekkaya, A. E.

2018-05-01

The tendency to a higher variety of products requires economical manufacturing processes suitable for the production of prototypes and small batches. In the case of complex hollow-shaped parts, single point incremental forming (SPIF) represents a highly flexible process. The flexibility of this process comes along with a very long process time. To decrease the process time, a new incremental forming approach with multiple forming tools is investigated. The influence of two incremental forming tools on the resulting mechanical and geometrical component properties compared to SPIF is presented. Sheets made of EN AW-1050A were formed to frustums of a pyramid using different tool-path strategies. Furthermore, several variations of the tool-path strategy are analyzed. A time saving between 40% and 60% was observed depending on the tool-path and the radii of the forming tools while the mechanical properties remained unchanged. This knowledge can increase the cost efficiency of incremental forming processes.

Taurine supplementation has anti-atherogenic and anti-inflammatory effects before and after incremental exercise in heart failure.

Science.gov (United States)

Ahmadian, Mehdi; Roshan, Valiollah Dabidi; Aslani, Elaheh; Stannard, Stephen R

2017-07-01

The purpose of this study was to examine the anti-atherogenic and anti-inflammatory effect of supplemental taurine prior to and following incremental exercise in patients with heart failure (HF). Patients with HF and left ventricle ejection fraction less than 50%, and placed in functional class II or III according to the New York Heart Association classification, were randomly assigned to two groups: (1) taurine supplementation; or (2) placebo. The taurine group received oral taurine (500 mg) 3 times a day for 2 weeks, and performed exercise before and after the supplementation period. The placebo group followed the same protocol, but with a starch supplement (500 mg) rather than taurine. The incremental multilevel treadmill test was done using a modified Bruce protocol. Our results indicate that inflammatory indices [C-reactive protein (CRP), platelets] decreased in the taurine group in pre-exercise, post-supplementation and post-exercise, post-supplementation as compared with pre-exercise, pre-supplementation ( p exercise, post-supplementation and post-exercise, post-supplementation as compared with pre-exercise, pre-supplementation in the placebo group ( p exercise, post-supplementation and post-exercise, post-supplementation as compared with pre-exercise, pre-supplementation ( p 0.05). our results suggest that 2 weeks of oral taurine supplementation increases the taurine levels and has anti-atherogenic and anti-inflammatory effects prior to and following incremental exercise in HF patients.

Parallel Algorithm for Incremental Betweenness Centrality on Large Graphs

KAUST Repository

Jamour, Fuad Tarek; Skiadopoulos, Spiros; Kalnis, Panos

2017-01-01

: they either require excessive memory (i.e., quadratic to the size of the input graph) or perform unnecessary computations rendering them prohibitively slow. We propose iCentral; a novel incremental algorithm for computing betweenness centrality in evolving

Noise masking of S-cone increments and decrements.

Science.gov (United States)

Wang, Quanhong; Richters, David P; Eskew, Rhea T

2014-11-12

S-cone increment and decrement detection thresholds were measured in the presence of bipolar, dynamic noise masks. Noise chromaticities were the L-, M-, and S-cone directions, as well as L-M, L+M, and achromatic (L+M+S) directions. Noise contrast power was varied to measure threshold Energy versus Noise (EvN) functions. S+ and S- thresholds were similarly, and weakly, raised by achromatic noise. However, S+ thresholds were much more elevated by S, L+M, L-M, L- and M-cone noises than were S- thresholds, even though the noises consisted of two symmetric chromatic polarities of equal contrast power. A linear cone combination model accounts for the overall pattern of masking of a single test polarity well. L and M cones have opposite signs in their effects upon raising S+ and S- thresholds. The results strongly indicate that the psychophysical mechanisms responsible for S+ and S- detection, presumably based on S-ON and S-OFF pathways, are distinct, unipolar mechanisms, and that they have different spatiotemporal sampling characteristics, or contrast gains, or both. © 2014 ARVO.

Incremental principal component pursuit for video background modeling

Science.gov (United States)

Rodriquez-Valderrama, Paul A.; Wohlberg, Brendt

2017-03-14

An incremental Principal Component Pursuit (PCP) algorithm for video background modeling that is able to process one frame at a time while adapting to changes in background, with a computational complexity that allows for real-time processing, having a low memory footprint and is robust to translational and rotational jitter.

Geometry of finite deformations and time-incremental analysis

Czech Academy of Sciences Publication Activity Database

Fiala, Zdeněk

2016-01-01

Roč. 81, May (2016), s. 230-244 ISSN 0020-7462 Institutional support: RVO:68378297 Keywords : solid mechanics * finite deformations * time-incremental analysis * Lagrangian system * evolution equation of Lie type Subject RIV: BE - Theoretical Physics Impact factor: 2.074, year: 2016 http://www.sciencedirect.com/science/article/pii/S0020746216000330

Incremental View Maintenance for Deductive Graph Databases Using Generalized Discrimination Networks

Directory of Open Access Journals (Sweden)

Thomas Beyhl

2016-12-01

Full Text Available Nowadays, graph databases are employed when relationships between entities are in the scope of database queries to avoid performance-critical join operations of relational databases. Graph queries are used to query and modify graphs stored in graph databases. Graph queries employ graph pattern matching that is NP-complete for subgraph isomorphism. Graph database views can be employed that keep ready answers in terms of precalculated graph pattern matches for often stated and complex graph queries to increase query performance. However, such graph database views must be kept consistent with the graphs stored in the graph database. In this paper, we describe how to use incremental graph pattern matching as technique for maintaining graph database views. We present an incremental maintenance algorithm for graph database views, which works for imperatively and declaratively specified graph queries. The evaluation shows that our maintenance algorithm scales when the number of nodes and edges stored in the graph database increases. Furthermore, our evaluation shows that our approach can outperform existing approaches for the incremental maintenance of graph query results.

Final Safety Analysis Report (FSAR) for Building 332, Increment III

Energy Technology Data Exchange (ETDEWEB)

Odell, B. N.; Toy, Jr., A. J.

1977-08-31

This Final Safety Analysis Report (FSAR) supplements the Preliminary Safety Analysis Report (PSAR), dated January 18, 1974, for Building 332, Increment III of the Plutonium Materials Engineering Facility located at the Lawrence Livermore Laboratory (LLL). The FSAR, in conjunction with the PSAR, shows that the completed increment provides facilities for safely conducting the operations as described. These documents satisfy the requirements of ERDA Manual Appendix 6101, Annex C, dated April 8, 1971. The format and content of this FSAR complies with the basic requirements of the letter of request from ERDA San to LLL, dated March 10, 1972. Included as appendices in support of th FSAR are the Building 332 Operational Safety Procedure and the LLL Disaster Control Plan.

Health level seven interoperability strategy: big data, incrementally structured.

Science.gov (United States)

Dolin, R H; Rogers, B; Jaffe, C

2015-01-01

Describe how the HL7 Clinical Document Architecture (CDA), a foundational standard in US Meaningful Use, contributes to a "big data, incrementally structured" interoperability strategy, whereby data structured incrementally gets large amounts of data flowing faster. We present cases showing how this approach is leveraged for big data analysis. To support the assertion that semi-structured narrative in CDA format can be a useful adjunct in an overall big data analytic approach, we present two case studies. The first assesses an organization's ability to generate clinical quality reports using coded data alone vs. coded data supplemented by CDA narrative. The second leverages CDA to construct a network model for referral management, from which additional observations can be gleaned. The first case shows that coded data supplemented by CDA narrative resulted in significant variances in calculated performance scores. In the second case, we found that the constructed network model enables the identification of differences in patient characteristics among different referral work flows. The CDA approach goes after data indirectly, by focusing first on the flow of narrative, which is then incrementally structured. A quantitative assessment of whether this approach will lead to a greater flow of data and ultimately a greater flow of structured data vs. other approaches is planned as a future exercise. Along with growing adoption of CDA, we are now seeing the big data community explore the standard, particularly given its potential to supply analytic en- gines with volumes of data previously not possible.

Increment and mortality in a virgin Douglas-fir forest.

Science.gov (United States)

Robert W. Steele; Norman P. Worthington

1955-01-01

Is there any basis to the forester's rule of thumb that virgin forests eventually reach an equilibrium where increment and mortality approximately balance? Are we wasting potential timber volume by failing to salvage mortality in old-growth stands?

Adaptive Functional-Based Neuro-Fuzzy-PID Incremental Controller Structure

Directory of Open Access Journals (Sweden)

Ashraf Ahmed Fahmy

2014-03-01

Full Text Available This paper presents an adaptive functional-based Neuro-fuzzy-PID incremental (NFPID controller structure that can be tuned either offline or online according to required controller performance. First, differential membership functions are used to represent the fuzzy membership functions of the input-output space of the three term controller. Second, controller rules are generated based on the discrete proportional, derivative, and integral function for the fuzzy space. Finally, a fully differentiable fuzzy neural network is constructed to represent the developed controller for either offline or online controller parameter adaptation.  Two different adaptation methods are used for controller tuning, offline method based on controller transient performance cost function optimization using Bees Algorithm, and online method based on tracking error minimization using back-propagation with momentum algorithm. The proposed control system was tested to show the validity of the controller structure over a fixed PID controller gains to control SCARA type robot arm.

Diagnostic value of triphasic incremental helical CT in early and progressive gastric carcinoma

International Nuclear Information System (INIS)

Gao Jianbo; Yan Xuehua; Li Mengtai; Guo Hua; Chen Xuejun; Guan Sheng; Zhang Xiefu; Li Shuxin; Yang Xiaopeng

2001-01-01

Objective: To investigate helical CT enhancement characteristics of gastric carcinoma, and the diagnostic value and preoperative staging of gastric carcinoma with triphasic incremental helical CT of the stomach with water-filling method. Methods: Both double-contrast barium examination and triphasic incremental helical CT of the stomach with water-filling method were performed in 46 patients with gastric carcinoma. Results: (1) Among these patients, normal gastric wall exhibited one layered structure in 18 patients, two or three layered structure in 28 patients in the arterial and portal venous phase. (2) Two cases of early stomach cancer showed marked enhancement in the arterial and portal venous phase and obvious attenuation of enhancement in the equilibrium phase. On the contrary, 32 of the 44 advanced gastric carcinoma was showed marked enhancement in the venous phase compared with the arterial phase ( t = 4.226, P < 0.05). (3) The total accuracy of triphasic incremental helical CT in determining TNM-staging was 81.0%. Conclusion: Different types of gastric carcinoma have different enhancement features. Triphases incremental helical CT is more accurate than conventional CT in the preoperative staging of gastric carcinoma

A System to Derive Optimal Tree Diameter Increment Models from the Eastwide Forest Inventory Data Base (EFIDB)

Science.gov (United States)

Don C. Bragg

2002-01-01

This article is an introduction to the computer software used by the Potential Relative Increment (PRI) approach to optimal tree diameter growth modeling. These DOS programs extract qualified tree and plot data from the Eastwide Forest Inventory Data Base (EFIDB), calculate relative tree increment, sort for the highest relative increments by diameter class, and...

Annual increments, specific gravity and energy of Eucalyptus grandis by gamma-ray attenuation technique

International Nuclear Information System (INIS)

Rezende, M.A.; Guerrini, I.A.; Ferraz, E.S.B.

1990-01-01

Specific gravity annual increments in volume, mass and energy of Eucalyptus grandis at thirteen years of age were made taking into account measurements of the calorific value for wood. It was observed that the calorific value for wood decrease slightly, while the specific gravity increase significantly with age. The so-called culmination age for the Annual Volume Increment was determined to be around fourth year of growth while for the Annual Mass and Energy Increment was around the eighty year. These results show that a tree in a particular age may not have a significant growth in volume, yet one is mass and energy. (author)

Relato de caso sobre o aprendizado em desenvolvimento de sistemas baseado no Framework Lavarel

Directory of Open Access Journals (Sweden)

Aline Silva De Bona

2017-08-01

Full Text Available O trabalho pretende compartilhar a vivência do desenvolvimento de um sistema com a finalidade de realizar as inscrições de um evento de ensino - Semana Acadêmica Integrada no IFRS – Campus Osório, e gerar as listas de presença para cada atividade da programação. Tal foi realizado por quatro estudantes do curso superior - Tecnologia em Análise e Desenvolvimento de Sistemas e baseado no Framework Laravel. O objetivo do relato de caso, alicerçado à experiência do evento, é de refletir sobre a aprendizagem de como se desenvolveu a construção e o quão complexa é a relação de quem solicita a criação de um sistema, o usuário, e o desenvolvedor, pois existem imprevistos, erros e prazos a serem cumpridos, além da escolha da ferramenta para a criação. A base teórica é a compreensão construtivista segundo a Teoria de Piaget do processo de aprendizagem desenvolvido por esses estudantes para a construção do sistema. Aponta-se um resultado do trabalho, além do sistema desenvolvido, as reflexões da comissão organizadora do quanto antes é preciso organizar as etapas de desenvolvimento de um sistema para que se minimizem os erros. A vivência dos estudantes formandos sobre como seria uma relação com o cliente também é apresentada.

Stem analysis program (GOAP for evaluating of increment and growth data at individual tree

Directory of Open Access Journals (Sweden)

Gafura Aylak Özdemir

2016-07-01

Full Text Available Stem analysis is a method evaluating in a detailed way data of increment and growth of individual tree at the past periods and widely used in various forestry disciplines. Untreated data of stem analysis consist of annual ring count and measurement procedures performed on cross sections taken from individual tree by section method. The evaluation of obtained this untreated data takes quite some time. Thus, a computer software was developed in this study to quickly and efficiently perform stem analysis. This computer software developed to evaluate untreated data of stem analysis as numerical and graphical was programmed as macro by utilizing Visual Basic for Application feature of MS Excel 2013 program currently the most widely used. In developed this computer software, growth height model is formed from two different approaches, individual tree volume depending on section method, cross-sectional area, increments of diameter, height and volume, volume increment percent and stem form factor at breast height are calculated depending on desired period lengths. This calculated values are given as table. Development of diameter, height, volume, increments of these variables, volume increment percent and stem form factor at breast height according to periodic age are given as chart. Stem model showing development of diameter, height and shape of individual tree in the past periods also can be taken from computer software as chart.

Using Analysis Increments (AI) to Estimate and Correct Systematic Errors in the Global Forecast System (GFS) Online

Science.gov (United States)

Bhargava, K.; Kalnay, E.; Carton, J.; Yang, F.

2017-12-01

-grid scale physical parameterizations, more accurate discretization of the model dynamics, boundary conditions, radiative transfer codes, and other potential model improvements which can then replace the empirical correction scheme. The analysis increments also provide guidance in testing new physical parameterizations.

Fasting Lipoprotein Lipase Protein Levels Can Predict a Postmeal Increment of Triglyceride Levels in Fasting Normohypertriglyceridemic Subjects.

Science.gov (United States)

Tsuzaki, Kokoro; Kotani, Kazuhiko; Yamada, Kazunori; Sakane, Naoki

2016-09-01

Although a postprandial increment in triglyceride (TG) levels is considered to be a risk factor for atherogenesis, tests (e.g., fat load) to assess postprandial changes in TG levels cannot be easily applied to clinical practice. Therefore, fasting markers that predict postprandial TG states are needed to be developed. One current candidate is lipoprotein lipase (LPL) protein, a molecule that hydrides TGs. This study investigated whether fasting LPL levels could predict postprandial TG levels. A total of 17 subjects (11 men, 6 women, mean age 52 ± 11 years) with normotriglyceridemia during fasting underwent the meal test. Several fasting parameters, including LPL, were measured for the area under the curve of postprandial TGs (AUC-TG). The subjects' mean fasting TG level was 1.30 mmol/l, and their mean LPL level was 41.6 ng/ml. The subjects' TG levels increased after loading (they peaked after two postprandial hours). Stepwise multiple regression analysis demonstrated that fasting TG levels were a predictor of the AUC-TG. In addition, fasting LPL mass levels were found to be a predictor of the AUC-TG (β = 0.65, P fasting TG levels. Fasting LPL levels may be useful to predict postprandial TG increment in this population. © 2015 Wiley Periodicals, Inc.

Application of CalME incremental-recursive method to the evaluation of the structural condition as asphalt pavements

International Nuclear Information System (INIS)

Mateos Moreno, A.; Perez Ayuso, J.; Cadavid Jauregui, B.; Marron Fernandez, J. O.

2011-01-01

CalME procedure represents one of the most advanced tools for the design, of flexible pavements world-wide. IT is an incremental-recursive method, which means that pavements service life must be divided into many time intervals where both structural integrity and environmental conditions can be regarded as constants. It also means that the damage calculated at the end of each interval must be considered as initial condition for the next one. The goal of this type of models is the prediction of the evolution of the different distress mechanisms. The advantages of incremental-recursive procedures versus classical analytical design are shown in this paper. Advantages are shown not only in terms of design, but also as a tool in order to support structural evaluation. In particular, the potential of asphalt fatigue model incorporated in CalME is presented. this model is initially calibrated in the laboratory, and it is then re-calibrated based on the actual performance observed from field deflection testing. The model provides a reliable prediction of the future evolution of the damage of the asphalt mixture. Fatigue model validation has been conducted based on the performance from several flexible sections evaluated in CEDEX full-scale pavements test track. (Author) 14 refs.

Generation of Referring Expressions: Assessing the Incremental Algorithm

Science.gov (United States)

van Deemter, Kees; Gatt, Albert; van der Sluis, Ielka; Power, Richard

2012-01-01

A substantial amount of recent work in natural language generation has focused on the generation of "one-shot" referring expressions whose only aim is to identify a target referent. Dale and Reiter's Incremental Algorithm (IA) is often thought to be the best algorithm for maximizing the similarity to referring expressions produced by people. We…

Incremental exposure facilitates adaptation to sensory rearrangement. [vestibular stimulation patterns

Science.gov (United States)

Lackner, J. R.; Lobovits, D. N.

1978-01-01

Visual-target pointing experiments were performed on 24 adult volunteers in order to compare the relative effectiveness of incremental (stepwise) and single-step exposure conditions on adaptation to visual rearrangement. The differences between the preexposure and postexposure scores served as an index of the adaptation elicited during the exposure period. It is found that both single-step and stepwise exposure to visual rearrangement elicit compensatory changes in sensorimotor coordination. However, stepwise exposure, when compared to single-step exposur in terms of the average magnitude of visual displacement over the exposure period, clearly enhances the rate of adaptation. It seems possible that the enhancement of adaptation to unusual patterns of sensory stimulation produced by incremental exposure reflects a general principle of sensorimotor function.

Weighted tunable clustering in local-world networks with increment behavior

International Nuclear Information System (INIS)

Ma, Ying-Hong; Li, Huijia; Zhang, Xiao-Dong

2010-01-01

Since some realistic networks are influenced not only by increment behavior but also by the tunable clustering mechanism with new nodes to be added to networks, it is interesting to characterize the model for those actual networks. In this paper, a weighted local-world model, which incorporates increment behavior and the tunable clustering mechanism, is proposed and its properties are investigated, such as degree distribution and clustering coefficient. Numerical simulations are fitted to the model and also display good right-skewed scale-free properties. Furthermore, the correlation of vertices in our model is studied which shows the assortative property. The epidemic spreading process by weighted transmission rate on the model shows that the tunable clustering behavior has a great impact on the epidemic dynamic

On kinematical minimum principles for rates and increments in plasticity

International Nuclear Information System (INIS)

Zouain, N.

1984-01-01

The optimization approach for elastoplastic analysis is discussed showing that some minimum principles related to numerical methods can be derived by means of duality and penalization procedures. Three minimum principles for velocity and plastic multiplier rate fields are presented in the framework of perfect plasticity. The first one is the classical Greenberg formulation. The second one, due to Capurso, is developed here with different motivation, and modified by penalization of constraints so as to arrive at a third principle for rates. The counterparts of these optimization formulations in terms of discrete increments of displacements of displacements and plastic multipliers are discussed. The third one of these minimum principles for finite increments is recognized to be closely related to Maier's formulation of holonomic plasticity. (Author) [pt

Variance-optimal hedging for processes with stationary independent increments

DEFF Research Database (Denmark)

Hubalek, Friedrich; Kallsen, J.; Krawczyk, L.

We determine the variance-optimal hedge when the logarithm of the underlying price follows a process with stationary independent increments in discrete or continuous time. Although the general solution to this problem is known as backward recursion or backward stochastic differential equation, we...

FDTD Stability: Critical Time Increment

Directory of Open Access Journals (Sweden)

Z. Skvor

2003-06-01

Full Text Available A new approach suitable for determination of the maximal stable timeincrement for the Finite-Difference Time-Domain (FDTD algorithm incommon curvilinear coordinates, for general mesh shapes and certaintypes of boundaries is presented. The maximal time incrementcorresponds to a characteristic value of a Helmholz equation that issolved by a finite-difference (FD method. If this method uses exactlythe same discretization as the given FDTD method (same mesh, boundaryconditions, order of precision etc., the maximal stable time incrementis obtained from the highest characteristic value. The FD system issolved by an iterative method, which uses only slightly alteredoriginal FDTD formulae. The Courant condition yields a stable timeincrement, but in certain cases the maximum increment is slightlygreater [2].

Incremental cryptography and security of public hash functions ...

African Journals Online (AJOL)

An investigation of incremental algorithms for crytographic functions was initiated. The problem, for collision-free hashing, is to design a scheme for which there exists an efficient “update” algorithm: this algorithm is given the hash function H, the hash h = H(M) of message M and the “replacement request” (j, m), and outputs ...

Effects of climate variables on intra-annual stem radial increment in Pinus cembra (L.) along the alpine treeline ecotone.

Science.gov (United States)

Gruber, Andreas; Zimmermann, Jolanda; Wieser, Gerhard; Oberhuber, Walter

2009-08-01

Within the alpine treeline ecotone tree growth is increasingly restricted by extreme climate conditions. Although intra-annual stem growth recorded by dendrometers can be linked to climate, stem diameter increments in slow-growing subalpine trees are masked by changes in tree water status.We tested the hypothesis that intra-annual radial stem growth in Pinus cembra is influenced by different climate variables along the treeline ecotone in the Austrian Alps. Dendrometer traces were compared with dynamics of xylem cell development to date onset of cambial activity and radial stem growth in spring.Daily fluctuations in stem radius reflected changes in tree water status throughout the treeline ecotone. Extracted daily radial increments were significantly correlated with air temperature at the timberline and treeline only, where budburst, cambial activity and enlargement of first tracheids also occurred quite similarly. A close relationship was detected between radial increment and number of enlarging tracheids throughout the treeline ecotone.We conclude that (i) the relationship between climate and radial stem growth within the treeline ecotone is dependent on a close coupling to atmospheric climate conditions and (ii) initiation of cambial activity and radial growth in spring can be distinguished from stem re-hydration by histological analysis.

Product Quality Modelling Based on Incremental Support Vector Machine

International Nuclear Information System (INIS)

Wang, J; Zhang, W; Qin, B; Shi, W

2012-01-01

Incremental Support vector machine (ISVM) is a new learning method developed in recent years based on the foundations of statistical learning theory. It is suitable for the problem of sequentially arriving field data and has been widely used for product quality prediction and production process optimization. However, the traditional ISVM learning does not consider the quality of the incremental data which may contain noise and redundant data; it will affect the learning speed and accuracy to a great extent. In order to improve SVM training speed and accuracy, a modified incremental support vector machine (MISVM) is proposed in this paper. Firstly, the margin vectors are extracted according to the Karush-Kuhn-Tucker (KKT) condition; then the distance from the margin vectors to the final decision hyperplane is calculated to evaluate the importance of margin vectors, where the margin vectors are removed while their distance exceed the specified value; finally, the original SVs and remaining margin vectors are used to update the SVM. The proposed MISVM can not only eliminate the unimportant samples such as noise samples, but also can preserve the important samples. The MISVM has been experimented on two public data and one field data of zinc coating weight in strip hot-dip galvanizing, and the results shows that the proposed method can improve the prediction accuracy and the training speed effectively. Furthermore, it can provide the necessary decision supports and analysis tools for auto control of product quality, and also can extend to other process industries, such as chemical process and manufacturing process.

Pornographic image recognition and filtering using incremental learning in compressed domain

Science.gov (United States)

Zhang, Jing; Wang, Chao; Zhuo, Li; Geng, Wenhao

2015-11-01

With the rapid development and popularity of the network, the openness, anonymity, and interactivity of networks have led to the spread and proliferation of pornographic images on the Internet, which have done great harm to adolescents' physical and mental health. With the establishment of image compression standards, pornographic images are mainly stored with compressed formats. Therefore, how to efficiently filter pornographic images is one of the challenging issues for information security. A pornographic image recognition and filtering method in the compressed domain is proposed by using incremental learning, which includes the following steps: (1) low-resolution (LR) images are first reconstructed from the compressed stream of pornographic images, (2) visual words are created from the LR image to represent the pornographic image, and (3) incremental learning is adopted to continuously adjust the classification rules to recognize the new pornographic image samples after the covering algorithm is utilized to train and recognize the visual words in order to build the initial classification model of pornographic images. The experimental results show that the proposed pornographic image recognition method using incremental learning has a higher recognition rate as well as costing less recognition time in the compressed domain.

A design of LED adaptive dimming lighting system based on incremental PID controller

Science.gov (United States)

He, Xiangyan; Xiao, Zexin; He, Shaojia

2010-11-01

As a new generation energy-saving lighting source, LED is applied widely in various technology and industry fields. The requirement of its adaptive lighting technology is more and more rigorous, especially in the automatic on-line detecting system. In this paper, a closed loop feedback LED adaptive dimming lighting system based on incremental PID controller is designed, which consists of MEGA16 chip as a Micro-controller Unit (MCU), the ambient light sensor BH1750 chip with Inter-Integrated Circuit (I2C), and constant-current driving circuit. A given value of light intensity required for the on-line detecting environment need to be saved to the register of MCU. The optical intensity, detected by BH1750 chip in real time, is converted to digital signal by AD converter of the BH1750 chip, and then transmitted to MEGA16 chip through I2C serial bus. Since the variation law of light intensity in the on-line detecting environment is usually not easy to be established, incremental Proportional-Integral-Differential (PID) algorithm is applied in this system. Control variable obtained by the incremental PID determines duty cycle of Pulse-Width Modulation (PWM). Consequently, LED's forward current is adjusted by PWM, and the luminous intensity of the detection environment is stabilized by self-adaptation. The coefficients of incremental PID are obtained respectively after experiments. Compared with the traditional LED dimming system, it has advantages of anti-interference, simple construction, fast response, and high stability by the use of incremental PID algorithm and BH1750 chip with I2C serial bus. Therefore, it is suitable for the adaptive on-line detecting applications.

Validity and reliability of the look Keo power pedal system for measuring power output during incremental and repeated sprint cycling.

Science.gov (United States)

Sparks, S Andy; Dove, Benjamin; Bridge, Craig A; Midgely, Adrian W; McNaughton, Lars R

2015-01-01

Power meters have traditionally been integrated into the crank set, but several manufacturers have designed new systems located elsewhere on the bike, such as inside the pedals. This study aimed to determine the validity and reliability of the Keo power pedals during several laboratory cycling tasks. Ten active male participants (mean ± SD age 34.0 ± 10.6 y, height 1.77 ± 0.04 m, body mass 76.5 ± 10.7 kg) familiar with laboratory cycling protocols completed this study. Each participant was required to complete 2 laboratory cycling trials on an SRM ergometer (SRM, Germany) that was also fitted with the Keo power pedals (Look, France). The trials consisted of an incremental test to exhaustion followed by 10 min rest and then three 10-s sprint tests separated by 3 min of cycling at 100 W. Over power ranges of 75 to 1147 W, the Keo power-pedal system produced typical error values of 0.40, 0.21, and 0.21 for the incremental, sprint, and combined trials, respectively, compared with the SRM. Mean differences of 21.0 and 18.6 W were observed between trials 1 and 2 with the Keo system in the incremental and combined protocols, respectively. In contrast, the SRM produced differences of 1.3 and 0.6 W for the same protocols. The power data from the Keo power pedals should be treated with some caution given the presence of mean differences between them and the SRM. Furthermore, this is exacerbated by poorer reliability than that of the SRM power meter.

Incremental Learning of Perceptual Categories for Open-Domain Sketch Recognition

National Research Council Canada - National Science Library

Lovett, Andrew; Dehghani, Morteza; Forbus, Kenneth

2007-01-01

.... This paper describes an incremental learning technique for opendomain recognition. Our system builds generalizations for categories of objects based upon previous sketches of those objects and uses those generalizations to classify new sketches...

Reliability and validity of heart rate variability threshold assessment during an incremental shuttle-walk test in middle-aged and older adults

Energy Technology Data Exchange (ETDEWEB)

Dourado, V.Z.; Guerra, R.L.F. [Laboratório de Estudos da Motricidade Humana, Departamento de Ciências do Movimento Humano, Universidade Federal de São Paulo, Santos, SP (Brazil)

2013-02-01

Studies on the assessment of heart rate variability threshold (HRVT) during walking are scarce. We determined the reliability and validity of HRVT assessment during the incremental shuttle walk test (ISWT) in healthy subjects. Thirty-one participants aged 57 ± 9 years (17 females) performed 3 ISWTs. During the 1st and 2nd ISWTs, instantaneous heart rate variability was calculated every 30 s and HRVT was measured. Walking velocity at HRVT in these tests (WV-HRVT1 and WV-HRVT2) was registered. During the 3rd ISWT, physiological responses were assessed. The ventilatory equivalents were used to determine ventilatory threshold (VT) and the WV at VT (WV-VT) was recorded. The difference between WV-HRVT1 and WV-HRVT2 was not statistically significant (median and interquartile range = 4.8; 4.8 to 5.4 vs 4.8; 4.2 to 5.4 km/h); the correlation between WV-HRVT1 and WV-HRVT2 was significant (r = 0.84); the intraclass correlation coefficient was high (0.92; 0.82 to 0.96), and the agreement was acceptable (-0.08 km/h; -0.92 to 0.87). The difference between WV-VT and WV-HRVT2 was not statistically significant (4.8; 4.8 to 5.4 vs 4.8; 4.2 to 5.4 km/h) and the agreement was acceptable (0.04 km/h; -1.28 to 1.36). HRVT assessment during walking is a reliable measure and permits the estimation of VT in adults. We suggest the use of the ISWT for the assessment of exercise capacity in middle-aged and older adults.

Reliability and validity of heart rate variability threshold assessment during an incremental shuttle-walk test in middle-aged and older adults

International Nuclear Information System (INIS)

Dourado, V.Z.; Guerra, R.L.F.

2013-01-01

Studies on the assessment of heart rate variability threshold (HRVT) during walking are scarce. We determined the reliability and validity of HRVT assessment during the incremental shuttle walk test (ISWT) in healthy subjects. Thirty-one participants aged 57 ± 9 years (17 females) performed 3 ISWTs. During the 1st and 2nd ISWTs, instantaneous heart rate variability was calculated every 30 s and HRVT was measured. Walking velocity at HRVT in these tests (WV-HRVT1 and WV-HRVT2) was registered. During the 3rd ISWT, physiological responses were assessed. The ventilatory equivalents were used to determine ventilatory threshold (VT) and the WV at VT (WV-VT) was recorded. The difference between WV-HRVT1 and WV-HRVT2 was not statistically significant (median and interquartile range = 4.8; 4.8 to 5.4 vs 4.8; 4.2 to 5.4 km/h); the correlation between WV-HRVT1 and WV-HRVT2 was significant (r = 0.84); the intraclass correlation coefficient was high (0.92; 0.82 to 0.96), and the agreement was acceptable (-0.08 km/h; -0.92 to 0.87). The difference between WV-VT and WV-HRVT2 was not statistically significant (4.8; 4.8 to 5.4 vs 4.8; 4.2 to 5.4 km/h) and the agreement was acceptable (0.04 km/h; -1.28 to 1.36). HRVT assessment during walking is a reliable measure and permits the estimation of VT in adults. We suggest the use of the ISWT for the assessment of exercise capacity in middle-aged and older adults

Reliability and validity of heart rate variability threshold assessment during an incremental shuttle-walk test in middle-aged and older adults

Directory of Open Access Journals (Sweden)

V.Z. Dourado

2013-02-01

Full Text Available Studies on the assessment of heart rate variability threshold (HRVT during walking are scarce. We determined the reliability and validity of HRVT assessment during the incremental shuttle walk test (ISWT in healthy subjects. Thirty-one participants aged 57 ± 9 years (17 females performed 3 ISWTs. During the 1st and 2nd ISWTs, instantaneous heart rate variability was calculated every 30 s and HRVT was measured. Walking velocity at HRVT in these tests (WV-HRVT1 and WV-HRVT2 was registered. During the 3rd ISWT, physiological responses were assessed. The ventilatory equivalents were used to determine ventilatory threshold (VT and the WV at VT (WV-VT was recorded. The difference between WV-HRVT1 and WV-HRVT2 was not statistically significant (median and interquartile range = 4.8; 4.8 to 5.4 vs 4.8; 4.2 to 5.4 km/h; the correlation between WV-HRVT1 and WV-HRVT2 was significant (r = 0.84; the intraclass correlation coefficient was high (0.92; 0.82 to 0.96, and the agreement was acceptable (-0.08 km/h; -0.92 to 0.87. The difference between WV-VT and WV-HRVT2 was not statistically significant (4.8; 4.8 to 5.4 vs 4.8; 4.2 to 5.4 km/h and the agreement was acceptable (0.04 km/h; -1.28 to 1.36. HRVT assessment during walking is a reliable measure and permits the estimation of VT in adults. We suggest the use of the ISWT for the assessment of exercise capacity in middle-aged and older adults.

MOTIVATION AND PERFORMANCE IN PHYSICAL EDUCATION: AN EXPERIMENTAL TEST

Directory of Open Access Journals (Sweden)

Juan A. Moreno

2010-03-01

Full Text Available The purpose of this study was to analyse, experimentally, the relationships between motivation and performance in a lateral movement test in physical education. The study group consisted of 363 students (227 boys and 136 girls, aged between 12 and 16, who were randomly divided into three groups: an experimental group in which an incremental ability belief was induced, another experimental group in which an entity ability belief was induced, and a control group where there was no intervention. Measurements were made of situational intrinsic motivation, perceived competence in executing the task and performance. The results revealed that the incremental group reported higher scores on the situational intrinsic motivation scale. The entity group demonstrated better performance in the first test attempt than the incremental group but, in the second attempt, the performance was similar in the different groups. Perhaps the initial differences in performance disappeared because the incremental group counted on improving in the second attempt. These results are discussed in relation to the intensity with which the teacher conveys information relating to incremental ability belief of the pupil to increase intrinsic motivation and performance

Incremental learning for automated knowledge capture

Energy Technology Data Exchange (ETDEWEB)

Benz, Zachary O. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Basilico, Justin Derrick [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Davis, Warren Leon [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dixon, Kevin R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Brian S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Martin, Nathaniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wendt, Jeremy Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2013-12-01

People responding to high-consequence national-security situations need tools to help them make the right decision quickly. The dynamic, time-critical, and ever-changing nature of these situations, especially those involving an adversary, require models of decision support that can dynamically react as a situation unfolds and changes. Automated knowledge capture is a key part of creating individualized models of decision making in many situations because it has been demonstrated as a very robust way to populate computational models of cognition. However, existing automated knowledge capture techniques only populate a knowledge model with data prior to its use, after which the knowledge model is static and unchanging. In contrast, humans, including our national-security adversaries, continually learn, adapt, and create new knowledge as they make decisions and witness their effect. This artificial dichotomy between creation and use exists because the majority of automated knowledge capture techniques are based on traditional batch machine-learning and statistical algorithms. These algorithms are primarily designed to optimize the accuracy of their predictions and only secondarily, if at all, concerned with issues such as speed, memory use, or ability to be incrementally updated. Thus, when new data arrives, batch algorithms used for automated knowledge capture currently require significant recomputation, frequently from scratch, which makes them ill suited for use in dynamic, timecritical, high-consequence decision making environments. In this work we seek to explore and expand upon the capabilities of dynamic, incremental models that can adapt to an ever-changing feature space.

Revisiting the fundamentals of single point incremental forming by

DEFF Research Database (Denmark)

Silva, Beatriz; Skjødt, Martin; Martins, Paulo A.F.

2008-01-01

Knowledge of the physics behind the fracture of material at the transition between the inclined wall and the corner radius of the sheet is of great importance for understanding the fundamentals of single point incremental forming (SPIF). How the material fractures, what is the state of strain...

Will Incremental Hemodialysis Preserve Residual Function and Improve Patient Survival?

Science.gov (United States)

Davenport, Andrew

2015-01-01

The progressive loss of residual renal function in peritoneal dialysis patients is associated with increased mortality. It has been suggested that incremental dialysis may help preserve residual renal function and improve patient survival. Residual renal function depends upon both patient related and dialysis associated factors. Maintaining patients in an over-hydrated state may be associated with better preservation of residual renal function but any benefit comes with a significant risk of cardiovascular consequences. Notably, it is only observational studies that have reported an association between dialysis patient survival and residual renal function; causality has not been established for dialysis patient survival. The tenuous connections between residual renal function and outcomes and between incremental hemodialysis and residual renal function should temper our enthusiasm for interventions in this area. PMID:25385441

Object class hierarchy for an incremental hypertext editor

Directory of Open Access Journals (Sweden)

A. Colesnicov

1995-02-01

Full Text Available The object class hierarchy design is considered due to a hypertext editor implementation. The following basic classes were selected: the editor's coordinate system, the memory manager, the text buffer executing basic editing operations, the inherited hypertext buffer, the edit window, the multi-window shell. Special hypertext editing features, the incremental hypertext creation support and further generalizations are discussed.

Incremental Learning of Skill Collections based on Intrinsic Motivation

Directory of Open Access Journals (Sweden)

Jan Hendrik Metzen

2013-07-01

Full Text Available Life-long learning of reusable, versatile skills is a key prerequisite forembodied agents that act in a complex, dynamic environment and are faced withdifferent tasks over their lifetime. We address the question of how an agentcan learn useful skills efficiently during a developmental period,i.e., when no task is imposed on him and no external reward signal is provided.Learning of skills in a developmental period needs to be incremental andself-motivated. We propose a new incremental, task-independent skill discoveryapproach that is suited for continuous domains. Furthermore, the agent learnsspecific skills based on intrinsic motivation mechanisms thatdetermine on which skills learning is focused at a given point in time. Weevaluate the approach in a reinforcement learning setup in two continuousdomains with complex dynamics. We show that an intrinsically motivated, skilllearning agent outperforms an agent which learns task solutions from scratch.Furthermore, we compare different intrinsic motivation mechanisms and howefficiently they make use of the agent's developmental period.

Efficient incremental relaying for packet transmission over fading channels

KAUST Repository

Fareed, Muhammad Mehboob

2014-07-01

In this paper, we propose a novel relaying scheme for packet transmission over fading channels, which improves the spectral efficiency of cooperative diversity systems by utilizing limited feedback from the destination. Our scheme capitalizes on the fact that relaying is only required when direct transmission suffers deep fading. We calculate the packet error rate for the proposed efficient incremental relaying (EIR) scheme with both amplify and forward and decode and forward relaying. We compare the performance of the EIR scheme with the threshold-based incremental relaying (TIR) scheme. It is shown that the efficiency of the TIR scheme is better for lower values of the threshold. However, the efficiency of the TIR scheme for higher values of threshold is outperformed by the EIR. In addition, three new threshold-based adaptive EIR are devised to further improve the efficiency of the EIR scheme. We calculate the packet error rate and the efficiency of these new schemes to provide the analytical insight. © 2014 IEEE.

Table incremental slow injection CE-CT in lung cancer

International Nuclear Information System (INIS)

Yoshida, Shoji; Maeda, Tomoho; Morita, Masaru

1988-01-01

The purpose of this study is to evaluate tumor enhancement in lung cancer under the table incremental study with slow injection of contrast media. The early serial 8 sliced images during the slow injection (1.5 ml/sec) of contrant media were obtained. Following the early images, delayed 8 same sliced images were taken in 2 minutes later. Chacteristic enhanced patterns of the primary cancer and metastatic mediastinal lymphnode were recognized in this study. Enhancement of the primary lesion was classified in 4 patterns, irregular geographic pattern, heterogeneous pattern, homogeneous pattern and rim-enhanced pattern. In mediastinal metastatic lymphadenopathy, three enhanced patterns were obtained, heterogeneous, homogeneous and ring enhanced pattern. Some characteristic enhancement patterns according to the histopathological finding of the lung cancer were obtained. With using this incremental slow injection CE-CT, precise information about the relationship between lung cancer and adjacent mediastinal structure, and obvious staining patterns of the tumor and mediastinal lymphnode were recognized. (author)

Change point in VCO2 during incremental exercise test: a new method for assessment of human exercise tolerance.

Science.gov (United States)

Zoladz, J A; Szkutnik, Z; Majerczak, J; Duda, K

1999-09-01

The main purpose of this study was to present a new method to determine the level of power output (PO) at which VCO2 during incremental exercise test (IT) begins to rise non-linearly in relation to power output (PO) - the change point in VCO2 (CP-VCO2). Twenty-two healthy non-smoking men (mean +/- SD: age 22.0 +/- 0.9 years; body mass 74.5 +/- 7.5 kg; height 181 +/- 7 cm; VO2max 3.753 +/- 0.335 l min-1) performed an IT on a cycloergometer. The IT started at a PO of 30 W, followed by gradual increases of 30 W every 3 min. Antecubital venous blood samples were taken at the end of each step and analysed for plasma lactate concentration [La]pl, blood PO2, PCO2 [HCO3-]b and [H+]b. In the detection of the change-point VCO2 (CP-VCO2), a two-phase model was assumed for the 'third-minute-data' of each step of the test. In the first phase, a linear relationship between VCO2 and PO was assumed, whereas in the second, an additional increase in VCO2 was allowed, above the values expected from the linear model. The PO at which the first phase ends is called the change point in VCO2. The identification of the model consists of two steps: testing for the existence of the change point, and estimating its location. Both procedures are based on suitably normalized recursive residuals (see Zoladz et al. 1998a. Eur J Appl Physiol 78, 369-377). In the case of each of our subjects it was possible to detect the CP-VCO2 and the CP-VO2 as described in our model. The PO at the CP-VCO2 amounted to 134 +/- 42 W. The CP- VO2 was detected at 136 +/- 32 W, whereas the PO at the LT amounted to 128 +/- 30 W and corresponded to 49 +/- 11, 49 +/- 8 and 47 +/- 8.6% VO2max, respectively, for the CP-VCO2, CP-VO2 and the LT. The [La]pl at the CP-VCO2 (2.65 +/- 0.76 mmol L-1), at the CP-VO2 (2.53 +/- 0. 56 mmol L-1) and at the LT (2.25 +/- 0.49 mmol L-1) were already significantly higher (P < 0.01, Students t-test) than the value reached at rest (1.86 +/- 0.43 mmol L-1). Our study illustrates that the CP

Broad Learning System: An Effective and Efficient Incremental Learning System Without the Need for Deep Architecture.

Science.gov (United States)

Chen, C L Philip; Liu, Zhulin

2018-01-01

Broad Learning System (BLS) that aims to offer an alternative way of learning in deep structure is proposed in this paper. Deep structure and learning suffer from a time-consuming training process because of a large number of connecting parameters in filters and layers. Moreover, it encounters a complete retraining process if the structure is not sufficient to model the system. The BLS is established in the form of a flat network, where the original inputs are transferred and placed as "mapped features" in feature nodes and the structure is expanded in wide sense in the "enhancement nodes." The incremental learning algorithms are developed for fast remodeling in broad expansion without a retraining process if the network deems to be expanded. Two incremental learning algorithms are given for both the increment of the feature nodes (or filters in deep structure) and the increment of the enhancement nodes. The designed model and algorithms are very versatile for selecting a model rapidly. In addition, another incremental learning is developed for a system that has been modeled encounters a new incoming input. Specifically, the system can be remodeled in an incremental way without the entire retraining from the beginning. Satisfactory result for model reduction using singular value decomposition is conducted to simplify the final structure. Compared with existing deep neural networks, experimental results on the Modified National Institute of Standards and Technology database and NYU NORB object recognition dataset benchmark data demonstrate the effectiveness of the proposed BLS.

Phase retrieval via incremental truncated amplitude flow algorithm

Science.gov (United States)

Zhang, Quanbing; Wang, Zhifa; Wang, Linjie; Cheng, Shichao

2017-10-01

This paper considers the phase retrieval problem of recovering the unknown signal from the given quadratic measurements. A phase retrieval algorithm based on Incremental Truncated Amplitude Flow (ITAF) which combines the ITWF algorithm and the TAF algorithm is proposed. The proposed ITAF algorithm enhances the initialization by performing both of the truncation methods used in ITWF and TAF respectively, and improves the performance in the gradient stage by applying the incremental method proposed in ITWF to the loop stage of TAF. Moreover, the original sampling vector and measurements are preprocessed before initialization according to the variance of the sensing matrix. Simulation experiments verified the feasibility and validity of the proposed ITAF algorithm. The experimental results show that it can obtain higher success rate and faster convergence speed compared with other algorithms. Especially, for the noiseless random Gaussian signals, ITAF can recover any real-valued signal accurately from the magnitude measurements whose number is about 2.5 times of the signal length, which is close to the theoretic limit (about 2 times of the signal length). And it usually converges to the optimal solution within 20 iterations which is much less than the state-of-the-art algorithms.

A simple extension of contraction theory to study incremental stability properties

DEFF Research Database (Denmark)

Jouffroy, Jerome

Contraction theory is a recent tool enabling to study the stability of nonlinear systems trajectories with respect to one another, and therefore belongs to the class of incremental stability methods. In this paper, we extend the original definition of contraction theory to incorporate...... in an explicit manner the control input of the considered system. Such an extension, called universal contraction, is quite analogous in spirit to the well-known Input-to-State Stability (ISS). It serves as a simple formulation of incremental ISS, external stability, and detectability in a differential setting....... The hierarchical combination result of contraction theory is restated in this framework, and a differential small-gain theorem is derived from results already available in Lyapunov theory....

The non-invasive and continuous estimation of cardiac output using a photoplethysmogram and electrocardiogram during incremental exercise

International Nuclear Information System (INIS)

Wang, L; Poon, C C Y; Zhang, Y T

2010-01-01

Cardiac output (CO) monitoring is not only essential for critically ill patients in the hospital, but also for patients at home and those undergoing cardiopulmonary exercise testing. However, CO is difficult to monitor during daily activities and exercise. In this paper, we aim at developing a novel CO estimation method that can be used under these challenging conditions. The tube model was utilized to derive a CO index, namely the pulse time reflection ratio (PTRR) from an electrocardiogram and photoplethysmogram. After calibration, the PTRR can be used to estimate beat-to-beat CO. The proposed method was verified against CO measured by impedance cardiography on 19 healthy subjects in an incremental intensity exercise test. Results showed that there were strong correlations (r) between the PTRR and reference CO in 18 subjects (mean r: 0.88, n = 245 trials). Two calibration approaches reported in the literature were applied to the proposed method and the corresponding bias ± precisions of estimation errors were 0 ± 1.89 L min −1 and −0.22 ± 2.12 L min −1 , respectively. The percent errors were 21.94% and 24.90%, smaller than the clinical acceptance limit (30%). To conclude, after calibration, this method can be used to monitor CO on healthy subjects during incremental intensity exercise

Ventilatory threshold during incremental running can be estimated using EMG shorts.

Science.gov (United States)

Tikkanen, Olli; Hu, Min; Vilavuo, Toivo; Tolvanen, Pekka; Cheng, Sulin; Finni, Taija

2012-04-01

The present study examined whether shorts with textile electromyographic (EMG) electrodes can be used to detect second ventilatory threshold (V(T2)) during incremental treadmill running. Thirteen recreationally active (REC) and eight endurance athletes were measured for EMG, heart rate, blood lactate and respiratory gases during VO(2max) test (3 min ramps, 1 km·h(-1) increments). V(T)(2), onset of blood lactate accumulation (OBLA) and EMG threshold (EMG(T)) were determined. In athletes, OBLA occurred at 56 ± 6 mL·kg(-1)·min(-1), V(T2) occurred at 59 ± 6 mL·kg(-1)·min(-1), and EMG(T) at 62 ± 6 mL·kg(-1)·min(-1) without significant differences between methods (analysis of variance: ANOVA). In REC participants, OBLA occurred at 40 ± 10 mL·kg(-1)·min(-1), V(T2) occurred at 43 ± 7 mL·kg(-1)·min(-1), and EMG(T) at 41 ± 9 mL·kg(-1)·min(-1) without significant differences between methods (ANOVA). For the entire group, correlation between EMG(T) and V(T2) was 0.86 (P < 0.001) and 0.84 (P < 0.001) between EMG(T) and OBLA. Limits of agreement between EMG(T) and V(T2) were narrower in athletes than in REC participants. Thus, it is concluded that estimation of V(T2) using EMG(T) in athletes is more valid than in REC participants. In practice, experienced runners could use online feedback from EMG garments to monitor whether their running intensity is near V(T2). © 2012 Institute of Physics and Engineering in Medicine

Size, Stability and Incremental Budgeting Outcomes in Public Universities.

Science.gov (United States)

Schick, Allen G.; Hills, Frederick S.

1982-01-01

Examined the influence of relative size in the analysis of total dollar and workforce budgets, and changes in total dollar and workforce budgets when correlational/regression methods are used. Data suggested that size dominates the analysis of total budgets, and is not a factor when discretionary dollar increments are analyzed. (JAC)

Performance of hybrid-ARQ with incremental redundancy over relay channels

KAUST Repository

Chelli, Ali; Alouini, Mohamed-Slim

2012-01-01

In this paper, we consider a relay network consisting of a source, a relay, and a destination. The source transmits a message to the destination using hybrid automatic repeat request (HARQ) with incremental redundancy (IR). The relay overhears

Localização de robô em ambiente interno utilizando um dispositivo móvel baseado no sistema operacional android para navegação inercial

OpenAIRE

Pedro Ramon de Mello Silva

2015-01-01

Resumo: A navegação autônoma de robôs tem sido alvo de pesquisa. Um dos problemas a ser resolvido em navegação é a localização de um robô móvel enquanto este se locomove, ou seja, estimar o deslocamento e orientação para calcular a trajetória realizada. Um sistema de navegação inercial é um método de realizar a localização do robô utilizando sensores inerciais (acelerômetro, giroscópio e magnetômetro). Este trabalho apresenta a utilização de um dispositivo móvel baseado no sistema operacional...

Methods of determining incremental energy costs for economic dispatch and inter-utility interchange in Canadian utilities

International Nuclear Information System (INIS)

El-Hawary, M.E.; El-Hawary, F.; Mbamalu, G.A.N.

1991-01-01

A questionnaire was mailed to ten Canadian utilities to determine the methods the utilities use in determining the incremental cost of delivering energy at any time. The questionnaire was divided into three parts: generation, transmission and general. The generation section dealt with heat rates, fuel, operation and maintenance, startup and shutdown, and method of prioritizing and economic evaluation of interchange transactions. Transmission dealt with inclusion of transmission system incremental maintenance costs, and transmission losses determination. The general section dealt with incremental costs aspects, and various other economic considerations. A summary is presented of responses to the questionnaire

Endogenous-cue prospective memory involving incremental updating of working memory: an fMRI study.

Science.gov (United States)

Halahalli, Harsha N; John, John P; Lukose, Ammu; Jain, Sanjeev; Kutty, Bindu M

2015-11-01

Prospective memory paradigms are conventionally classified on the basis of event-, time-, or activity-based intention retrieval. In the vast majority of such paradigms, intention retrieval is provoked by some kind of external event. However, prospective memory retrieval cues that prompt intention retrieval in everyday life are commonly endogenous, i.e., linked to a specific imagined retrieval context. We describe herein a novel prospective memory paradigm wherein the endogenous cue is generated by incremental updating of working memory, and investigated the hemodynamic correlates of this task. Eighteen healthy adult volunteers underwent functional magnetic resonance imaging while they performed a prospective memory task where the delayed intention was triggered by an endogenous cue generated by incremental updating of working memory. Working memory and ongoing task control conditions were also administered. The 'endogenous-cue prospective memory condition' with incremental working memory updating was associated with maximum activations in the right rostral prefrontal cortex, and additional activations in the brain regions that constitute the bilateral fronto-parietal network, central and dorsal salience networks as well as cerebellum. In the working memory control condition, maximal activations were noted in the left dorsal anterior insula. Activation of the bilateral dorsal anterior insula, a component of the central salience network, was found to be unique to this 'endogenous-cue prospective memory task' in comparison to previously reported exogenous- and endogenous-cue prospective memory tasks without incremental working memory updating. Thus, the findings of the present study highlight the important role played by the dorsal anterior insula in incremental working memory updating that is integral to our endogenous-cue prospective memory task.

An Incremental Time-delay Neural Network for Dynamical Recurrent Associative Memory

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

An incremental time-delay neural network based on synapse growth, which is suitable for dynamic control and learning of autonomous robots, is proposed to improve the learning and retrieving performance of dynamical recurrent associative memory architecture. The model allows steady and continuous establishment of associative memory for spatio-temporal regularities and time series in discrete sequence of inputs. The inserted hidden units can be taken as the long-term memories that expand the capacity of network and sometimes may fade away under certain condition. Preliminary experiment has shown that this incremental network may be a promising approach to endow autonomous robots with the ability of adapting to new data without destroying the learned patterns. The system also benefits from its potential chaos character for emergence.

Analytic description of the frictionally engaged in-plane bending process incremental swivel bending (ISB)

Science.gov (United States)

Frohn, Peter; Engel, Bernd; Groth, Sebastian

2018-05-01

Kinematic forming processes shape geometries by the process parameters to achieve a more universal process utilizations regarding geometric configurations. The kinematic forming process Incremental Swivel Bending (ISB) bends sheet metal strips or profiles in plane. The sequence for bending an arc increment is composed of the steps clamping, bending, force release and feed. The bending moment is frictionally engaged by two clamping units in a laterally adjustable bending pivot. A minimum clamping force hindering the material from slipping through the clamping units is a crucial criterion to achieve a well-defined incremental arc. Therefore, an analytic description of a singular bent increment is developed in this paper. The bending moment is calculated by the uniaxial stress distribution over the profiles' width depending on the bending pivot's position. By a Coulomb' based friction model, necessary clamping force is described in dependence of friction, offset, dimensions of the clamping tools and strip thickness as well as material parameters. Boundaries for the uniaxial stress calculation are given in dependence of friction, tools' dimensions and strip thickness. The results indicate that changing the bending pivot to an eccentric position significantly affects the process' bending moment and, hence, clamping force, which is given in dependence of yield stress and hardening exponent. FE simulations validate the model with satisfactory accordance.

Public Key Infrastructure Increment 2 (PKI Inc 2)

Science.gov (United States)

2016-03-01

across the Global Information Grid (GIG) and at rest. Using authoritative data, obtained via face-to-face identity proofing, PKI creates a credential ...operating on a network by provision of assured PKI-based credentials for any device on that network. ​​​​PKI Increment One made significant...provide assured/secure validation of revocation of an electronic/ digital credential . 2.DoD PKI shall support assured revocation status requests of

Physiological responses to incremental exercise in the heat following internal and external precooling.

Science.gov (United States)

James, C A; Richardson, A J; Watt, P W; Gibson, O R; Maxwell, N S

2015-06-01

Twelve males completed three incremental, discontinuous treadmill tests in the heat [31.9(1.0) °C, 61.9(8.9)%] to determine speed at two fixed blood lactate concentrations (2 and 3.5 mmol/L), running economy (RE), and maximum oxygen uptake ( V ˙ O 2 m a x ). Trials involved 20 min of either internal cooling (ICE, 7.5 g/kg ice slurry ingestion) or mixed-methods external cooling (EXT, cold towels, forearm immersion, ice vest, and cooling shorts), alongside no intervention (CON). Following precooling, participants ran 0.3 km/h faster at 2 mmol/L and 0.2 km/h faster at 3.5 mmol/L (P = 0.04, partial η(2)  = 0.27). Statistical differences were observed vs CON for ICE (P = 0.03, d = 0.15), but not EXT (P = 0.12, d = 0.15). There was no effect of cooling on RE (P = 0.81, partial η(2)  = 0.02), nor on V ˙ O 2 m a x (P = 0.69, partial η(2)  = 0.04). An effect for cooling on physiological strain index was observed (P cooling groups (P cooling. Precooling appears to reduce blood lactate accumulation and reduce thermoregulatory and perceptual strain during incremental exercise. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Some theoretical aspects of capacity increment in gaseous diffusion

Energy Technology Data Exchange (ETDEWEB)

Coates, J. H.; Guais, J. C.; Lamorlette, G.

1975-09-01

Facing to the sharply growing needs of enrichment services, the problem of implementing new capacities must be included in an optimized scheme spread out in time. In this paper the alternative solutions will be studied first for an unique increment decision, and then in an optimum schedule. The limits of the analysis will be discussed.

How to Perform Precise Soil and Sediment Sampling? One solution: The Fine Increment Soil Collector (FISC)

Energy Technology Data Exchange (ETDEWEB)

Mabit, L.; Toloza, A. [Soil and Water Management and Crop Nutrition Laboratory, IAEA, Seibersdorf (Austria); Meusburger, K.; Alewell, C. [Environmental Geosciences, Department of Environmental Sciences, University of Basel, Basel (Switzerland); Iurian, A-R. [Babes-Bolyai University, Faculty of Environmental Science and Engineering, Cluj-Napoca (Romania); Owens, P. N. [Environmental Science Program and Quesnel River Research Centre, University of Northern British Columbia, Prince George, British Columbia (Canada)

2014-07-15

Soil and sediment related research for terrestrial agrienvironmental assessments requires accurate depth incremental sampling to perform detailed analysis of physical, geochemical and biological properties of soil and exposed sediment profiles. Existing equipment does not allow collecting soil/sediment increments at millimetre resolution. The Fine Increment Soil Collector (FISC), developed by the SWMCN Laboratory, allows much greater precision in incremental soil/sediment sampling. It facilitates the easy recovery of collected material by using a simple screw-thread extraction system (see Figure 1). The FISC has been designed specifically to enable standardized scientific investigation of shallow soil/sediment samples. In particular, applications have been developed in two IAEA Coordinated Research Projects (CRPs): CRP D1.20.11 on “Integrated Isotopic Approaches for an Area-wide Precision Conservation to Control the Impacts of Agricultural Practices on Land Degradation and Soil Erosion” and CRP D1.50.15 on “Response to Nuclear Emergencies Affecting Food and Agriculture.”.

How to Perform Precise Soil and Sediment Sampling? One solution: The Fine Increment Soil Collector (FISC)

International Nuclear Information System (INIS)

Mabit, L.; Toloza, A.; Meusburger, K.; Alewell, C.; Iurian, A-R.; Owens, P.N.

2014-01-01

Soil and sediment related research for terrestrial agrienvironmental assessments requires accurate depth incremental sampling to perform detailed analysis of physical, geochemical and biological properties of soil and exposed sediment profiles. Existing equipment does not allow collecting soil/sediment increments at millimetre resolution. The Fine Increment Soil Collector (FISC), developed by the SWMCN Laboratory, allows much greater precision in incremental soil/sediment sampling. It facilitates the easy recovery of collected material by using a simple screw-thread extraction system (see Figure 1). The FISC has been designed specifically to enable standardized scientific investigation of shallow soil/sediment samples. In particular, applications have been developed in two IAEA Coordinated Research Projects (CRPs): CRP D1.20.11 on “Integrated Isotopic Approaches for an Area-wide Precision Conservation to Control the Impacts of Agricultural Practices on Land Degradation and Soil Erosion” and CRP D1.50.15 on “Response to Nuclear Emergencies Affecting Food and Agriculture.”

Brief report: The Brief Alcohol Social Density Assessment (BASDA): convergent, criterion-related, and incremental validity.

Science.gov (United States)

MacKillop, James; Acker, John D; Bollinger, Jared; Clifton, Allan; Miller, Joshua D; Campbell, W Keith; Goodie, Adam S

2013-09-01

Alcohol misuse is substantially influenced by social factors, but systematic assessments of social network drinking are typically lengthy. The goal of the present study was to provide further validation of a brief measure of social network alcohol use, the Brief Alcohol Social Density Assessment (BASDA), in a sample of emerging adults. Specifically, the study sought to examine the BASDA's convergent, criterion, and incremental validity in relation to well-established measures of drinking motives and problematic drinking. Participants were 354 undergraduates who were assessed using the BASDA, the Alcohol Use Disorders Identification Test (AUDIT), and the Drinking Motives Questionnaire. Significant associations were observed between the BASDA index of alcohol-related social density and alcohol misuse, social motives, and conformity motives, supporting convergent validity. Criterion-related validity was supported by evidence that significantly greater alcohol involvement was present in the social networks of individuals scoring at or above an AUDIT score of 8, a validated criterion for hazardous drinking. Finally, the BASDA index was significantly associated with alcohol misuse above and beyond drinking motives in relation to AUDIT scores, supporting incremental validity. Taken together, these findings provide further support for the BASDA as an efficient measure of drinking in an individual's social network. Methodological considerations as well as recommendations for future investigations in this area are discussed.

Identifying the Academic Rising Stars via Pairwise Citation Increment Ranking

KAUST Repository

Zhang, Chuxu; Liu, Chuang; Yu, Lu; Zhang, Zi-Ke; Zhou, Tao

2017-01-01

success academic careers. In this work, given a set of young researchers who have published the first first-author paper recently, we solve the problem of how to effectively predict the top k% researchers who achieve the highest citation increment in Δt

Incremental concept learning with few training examples and hierarchical classification

NARCIS (Netherlands)

Bouma, H.; Eendebak, P.T.; Schutte, K.; Azzopardi, G.; Burghouts, G.J.

2015-01-01

Object recognition and localization are important to automatically interpret video and allow better querying on its content. We propose a method for object localization that learns incrementally and addresses four key aspects. Firstly, we show that for certain applications, recognition is feasible

Incremental learning of skill collections based on intrinsic motivation

Science.gov (United States)

Metzen, Jan H.; Kirchner, Frank

2013-01-01

Life-long learning of reusable, versatile skills is a key prerequisite for embodied agents that act in a complex, dynamic environment and are faced with different tasks over their lifetime. We address the question of how an agent can learn useful skills efficiently during a developmental period, i.e., when no task is imposed on him and no external reward signal is provided. Learning of skills in a developmental period needs to be incremental and self-motivated. We propose a new incremental, task-independent skill discovery approach that is suited for continuous domains. Furthermore, the agent learns specific skills based on intrinsic motivation mechanisms that determine on which skills learning is focused at a given point in time. We evaluate the approach in a reinforcement learning setup in two continuous domains with complex dynamics. We show that an intrinsically motivated, skill learning agent outperforms an agent which learns task solutions from scratch. Furthermore, we compare different intrinsic motivation mechanisms and how efficiently they make use of the agent's developmental period. PMID:23898265

The Boundary Between Planning and Incremental Budgeting: Empirical Examination in a Publicly-Owned Corporation

OpenAIRE

S. K. Lioukas; D. J. Chambers

1981-01-01

This paper is a study within the field of public budgeting. It focuses on the capital budget, and it attempts to model and analyze the capital budgeting process using a framework previously developed in the literature of incremental budgeting. Within this framework the paper seeks to determine empirically whether the movement of capital expenditure budgets can be represented as the routine application of incremental adjustments over an existing base of allocations and whether further, forward...

An exploratory study of relative and incremental information content of two non-financial performance measures: Field study evidence on absence frequency and on-time delivery

NARCIS (Netherlands)

Wiersma, E.

2008-01-01

In this exploratory field study, I test the relative and incremental information content of two non-financial performance measures compared to financial performance measures for future financial performance. The proprietary database used is from the contracts of the managers of 27 responsibility

Enthalpy-increment measurements for CsI(s) and Cs2CrO4(s) by high-temperature Calvet calorimetry

International Nuclear Information System (INIS)

Venugopal, V.; Agarwal, R.; Roy, K.N.; Prasad, R.; Sood, D.D.

1987-01-01

Molar thermodynamic properties of CsI(s) and Cs 2 Cr O 4 (s) have been evaluated by enthalpy-increment measurements, using a Calvet high-temperature calorimeter. Least squares analyses were performed on the enthalpy increment results. Data is presented in tabular form for the dependence of enthalpy increments on temperature, in the range 333 to 822 K, for both caesium compounds, along with the thermal properties of the compounds. Good agreement is found between the present data and previously reported results on reduced enthalpy increments of CsI(s) and Cs 2 CrO 4 (s). (U.K.)

Toward translational incremental similarity-based reasoning in breast cancer grading

Science.gov (United States)

Tutac, Adina E.; Racoceanu, Daniel; Leow, Wee-Keng; Müller, Henning; Putti, Thomas; Cretu, Vladimir

2009-02-01

One of the fundamental issues in bridging the gap between the proliferation of Content-Based Image Retrieval (CBIR) systems in the scientific literature and the deficiency of their usage in medical community is based on the characteristic of CBIR to access information by images or/and text only. Yet, the way physicians are reasoning about patients leads intuitively to a case representation. Hence, a proper solution to overcome this gap is to consider a CBIR approach inspired by Case-Based Reasoning (CBR), which naturally introduces medical knowledge structured by cases. Moreover, in a CBR system, the knowledge is incrementally added and learned. The purpose of this study is to initiate a translational solution from CBIR algorithms to clinical practice, using a CBIR/CBR hybrid approach. Therefore, we advance the idea of a translational incremental similarity-based reasoning (TISBR), using combined CBIR and CBR characteristics: incremental learning of medical knowledge, medical case-based structure of the knowledge (CBR), image usage to retrieve similar cases (CBIR), similarity concept (central for both paradigms). For this purpose, three major axes are explored: the indexing, the cases retrieval and the search refinement, applied to Breast Cancer Grading (BCG), a powerful breast cancer prognosis exam. The effectiveness of this strategy is currently evaluated over cases provided by the Pathology Department of Singapore National University Hospital, for the indexing. With its current accuracy, TISBR launches interesting perspectives for complex reasoning in future medical research, opening the way to a better knowledge traceability and a better acceptance rate of computer-aided diagnosis assistance among practitioners.

Evaluation of incremental reactivity and its uncertainty in Southern California.

Science.gov (United States)

Martien, Philip T; Harley, Robert A; Milford, Jana B; Russell, Armistead G

2003-04-15

The incremental reactivity (IR) and relative incremental reactivity (RIR) of carbon monoxide and 30 individual volatile organic compounds (VOC) were estimated for the South Coast Air Basin using two photochemical air quality models: a 3-D, grid-based model and a vertically resolved trajectory model. Both models include an extended version of the SAPRC99 chemical mechanism. For the 3-D modeling, the decoupled direct method (DDM-3D) was used to assess reactivities. The trajectory model was applied to estimate uncertainties in reactivities due to uncertainties in chemical rate parameters, deposition parameters, and emission rates using Monte Carlo analysis with Latin hypercube sampling. For most VOC, RIRs were found to be consistent in rankings with those produced by Carter using a box model. However, 3-D simulations show that coastal regions, upwind of most of the emissions, have comparatively low IR but higher RIR than predicted by box models for C4-C5 alkenes and carbonyls that initiate the production of HOx radicals. Biogenic VOC emissions were found to have a lower RIR than predicted by box model estimates, because emissions of these VOC were mostly downwind of the areas of primary ozone production. Uncertainties in RIR of individual VOC were found to be dominated by uncertainties in the rate parameters of their primary oxidation reactions. The coefficient of variation (COV) of most RIR values ranged from 20% to 30%, whereas the COV of absolute incremental reactivity ranged from about 30% to 40%. In general, uncertainty and variability both decreased when relative rather than absolute reactivity metrics were used.

Cost of Incremental Expansion of an Existing Family Medicine Residency Program.

Science.gov (United States)

Ashkin, Evan A; Newton, Warren P; Toomey, Brian; Lingley, Ronald; Page, Cristen P

2017-07-01

Expanding residency training programs to address shortages in the primary care workforce is challenged by the present graduate medical education (GME) environment. The Medicare funding cap on new GME positions and reductions in the Health Resources and Services Administration (HRSA) Teaching Health Center (THC) GME program require innovative solutions to support primary care residency expansion. Sparse literature exists to assist in predicting the actual cost of incremental expansion of a family medicine residency program without federal or state GME support. In 2011 a collaboration to develop a community health center (CHC) academic medical partnership (CHAMP), was formed and created a THC as a training site for expansion of an existing family medicine residency program. The cost of expansion was a critical factor as no Federal GME funding or HRSA THC GME program support was available. Initial start-up costs were supported by a federal grant and local foundations. Careful financial analysis of the expansion has provided actual costs per resident of the incremental expansion of the residencyRESULTS: The CHAMP created a new THC and expanded the residency from eight to ten residents per year. The cost of expansion was approximately $72,000 per resident per year. The cost of incremental expansion of our residency program in the CHAMP model was more than 50% less than that of the recently reported cost of training in the HRSA THC GME program.

78 FR 22770 - Immigration Benefits Business Transformation, Increment I; Correction

Science.gov (United States)

2013-04-17

...-2009-0022] RIN 1615-AB83 Immigration Benefits Business Transformation, Increment I; Correction AGENCY...: Background On August 29, 2011, DHS issued a final rule titled, Immigration Benefits Business Transformation... business processes. In this notice, we are correcting three technical errors. DATES: The effective date of...

Sustained change blindness to incremental scene rotation: a dissociation between explicit change detection and visual memory.

Science.gov (United States)

Hollingworth, Andrew; Henderson, John M

2004-07-01

In a change detection paradigm, the global orientation of a natural scene was incrementally changed in 1 degree intervals. In Experiments 1 and 2, participants demonstrated sustained change blindness to incremental rotation, often coming to consider a significantly different scene viewpoint as an unchanged continuation of the original view. Experiment 3 showed that participants who failed to detect the incremental rotation nevertheless reliably detected a single-step rotation back to the initial view. Together, these results demonstrate an important dissociation between explicit change detection and visual memory. Following a change, visual memory is updated to reflect the changed state of the environment, even if the change was not detected.

Ventilatory threshold during incremental running can be estimated using EMG shorts

International Nuclear Information System (INIS)

Tikkanen, Olli; Vilavuo, Toivo; Finni, Taija; Hu, Min; Cheng, Sulin; Tolvanen, Pekka

2012-01-01

The present study examined whether shorts with textile electromyographic (EMG) electrodes can be used to detect second ventilatory threshold (V T2 ) during incremental treadmill running. Thirteen recreationally active (REC) and eight endurance athletes were measured for EMG, heart rate, blood lactate and respiratory gases during VO 2max test (3 min ramps, 1 km ⋅ h −1 increments). V T2 , onset of blood lactate accumulation (OBLA) and EMG threshold (EMG T ) were determined. In athletes, OBLA occurred at 56 ± 6 mL ⋅ kg −1  ⋅ min −1 , V T2 occurred at 59 ± 6 mL ⋅ kg −1  ⋅ min −1 , and EMG T at 62 ± 6 mL ⋅ kg −1  ⋅ min −1 without significant differences between methods (analysis of variance: ANOVA). In REC participants, OBLA occurred at 40 ± 10 mL ⋅ kg −1  ⋅ min −1 , V T2 occurred at 43 ± 7 mL ⋅ kg −1  ⋅ min −1 , and EMG T at 41 ± 9 mL ⋅ kg −1  ⋅ min −1 without significant differences between methods (ANOVA). For the entire group, correlation between EMG T and V T2 was 0.86 (P < 0.001) and 0.84 (P < 0.001) between EMG T and OBLA. Limits of agreement between EMG T and V T2 were narrower in athletes than in REC participants. Thus, it is concluded that estimation of V T2 using EMG T in athletes is more valid than in REC participants. In practice, experienced runners could use online feedback from EMG garments to monitor whether their running intensity is near V T2 . (paper)

Response saturation of monochromatic increments on intense achromatic backgrounds: implications for color-opponent organization in human vision

Science.gov (United States)

Drum, Bruce; Sternheim, Charles E.

2005-10-01

We present evidence that steady achromatic adapting fields can produce response saturation in color-opponent pathways. We measured tvi (log increment threshold illuminance versus log background illuminance) functions at four test wavelengths (430, 490, 575, and 660 nm) and nine background illuminances from 4.0 to 5.6 log Td. Foveal, 2° diameter, 1 s duration test stimuli were presented on a concentric, perceptually white (5128°K color temperature), 7° diameter, steady background. Thresholds were obtained by the method of adjustment, after which the test stimulus illuminances were increased 0.6 log unit and the subject estimated percentages of red, yellow, green, blue, and white. Average tvi slopes for two subjects were 2.06 for 430 nm, 1.6 for 490 nm, 1.11 for 575 nm and 1.34 for 660 nm, consistent with the estimated ratios of chromatic to achromatic sensitivity at the same wavelengths. Also, the percentage of white seen in the suprathreshold increments increased with increasing background illuminance despite increases in excitation purity. These findings imply that steady, intense, achromatic backgrounds can produce response saturation in color-opponent mechanisms at wavelengths across the visible spectrum. The saturation was more extreme at short wavelengths than at middle or long wavelengths, producing a tritanopic condition at the highest background illuminances. The tritanopia reduced color space to a predominately red-blue dichromacy, in agreement with previous findings. The results support a multistage opponent-color model in which precortical koniocellular and parvocellular opponent pathways interact to produce the observed red-green and yellow-blue color-opponent channels at a cortical level.

Identifying the Academic Rising Stars via Pairwise Citation Increment Ranking

KAUST Repository

Zhang, Chuxu

2017-08-02

Predicting the fast-rising young researchers (the Academic Rising Stars) in the future provides useful guidance to the research community, e.g., offering competitive candidates to university for young faculty hiring as they are expected to have success academic careers. In this work, given a set of young researchers who have published the first first-author paper recently, we solve the problem of how to effectively predict the top k% researchers who achieve the highest citation increment in Δt years. We explore a series of factors that can drive an author to be fast-rising and design a novel pairwise citation increment ranking (PCIR) method that leverages those factors to predict the academic rising stars. Experimental results on the large ArnetMiner dataset with over 1.7 million authors demonstrate the effectiveness of PCIR. Specifically, it outperforms all given benchmark methods, with over 8% average improvement. Further analysis demonstrates that temporal features are the best indicators for rising stars prediction, while venue features are less relevant.

A practical approach to assess leg muscle oxygenation during ramp-incremental cycle ergometry in heart failure

Directory of Open Access Journals (Sweden)

A.C. Barroco

2017-10-01

Full Text Available Heart failure is characterized by the inability of the cardiovascular system to maintain oxygen (O2 delivery (i.e., muscle blood flow in non-hypoxemic patients to meet O2 demands. The resulting increase in fractional O2 extraction can be non-invasively tracked by deoxygenated hemoglobin concentration (deoxi-Hb as measured by near-infrared spectroscopy (NIRS. We aimed to establish a simplified approach to extract deoxi-Hb-based indices of impaired muscle O2 delivery during rapidly-incrementing exercise in heart failure. We continuously probed the right vastus lateralis muscle with continuous-wave NIRS during a ramp-incremental cardiopulmonary exercise test in 10 patients (left ventricular ejection fraction <35% and 10 age-matched healthy males. Deoxi-Hb is reported as % of total response (onset to peak exercise in relation to work rate. Patients showed lower maximum exercise capacity and O2 uptake-work rate than controls (P<0.05. The deoxi-Hb response profile as a function of work rate was S-shaped in all subjects, i.e., it presented three distinct phases. Increased muscle deoxygenation in patients compared to controls was demonstrated by: i a steeper mid-exercise deoxi-Hb-work rate slope (2.2±1.3 vs 1.0±0.3% peak/W, respectively; P<0.05, and ii late-exercise increase in deoxi-Hb, which contrasted with stable or decreasing deoxi-Hb in all controls. Steeper deoxi-Hb-work rate slope was associated with lower peak work rate in patients (r=–0.73; P=0.01. This simplified approach to deoxi-Hb interpretation might prove useful in clinical settings to quantify impairments in O2 delivery by NIRS during ramp-incremental exercise in individual heart failure patients.

Robot-based additive manufacturing for flexible die-modelling in incremental sheet forming

Science.gov (United States)

Rieger, Michael; Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2017-10-01

The paper describes the application concept of additive manufactured dies to support the robot-based incremental sheet metal forming process (`Roboforming') for the production of sheet metal components in small batch sizes. Compared to the dieless kinematic-based generation of a shape by means of two cooperating industrial robots, the supporting robot models a die on the back of the metal sheet by using the robot-based fused layer manufacturing process (FLM). This tool chain is software-defined and preserves the high geometrical form flexibility of Roboforming while flexibly generating support structures adapted to the final part's geometry. Test series serve to confirm the feasibility of the concept by investigating the process challenges of the adhesion to the sheet surface and the general stability as well as the influence on the geometric accuracy compared to the well-known forming strategies.

Effects of frequency and duration on psychometric functions for detection of increments and decrements in sinusoids in noise.

Science.gov (United States)

Moore, B C; Peters, R W; Glasberg, B R

1999-12-01

Psychometric functions for detecting increments or decrements in level of sinusoidal pedestals were measured for increment and decrement durations of 5, 10, 20, 50, 100, and 200 ms and for frequencies of 250, 1000, and 4000 Hz. The sinusoids were presented in background noise intended to mask spectral splatter. A three-interval, three-alternative procedure was used. The results indicated that, for increments, the detectability index d' was approximately proportional to delta I/I. For decrements, d' was approximately proportional to delta L. The slopes of the psychometric functions increased (indicating better performance) with increasing frequency for both increments and decrements. For increments, the slopes increased with increasing increment duration up to 200 ms at 250 and 1000 Hz, but at 4000 Hz they increased only up to 50 ms. For decrements, the slopes increased for durations up to 50 ms, and then remained roughly constant, for all frequencies. For a center frequency of 250 Hz, the slopes of the psychometric functions for increment detection increased with duration more rapidly than predicted by a "multiple-looks" hypothesis, i.e., more rapidly than the square root of duration, for durations up to 50 ms. For center frequencies of 1000 and 4000 Hz, the slopes increased less rapidly than predicted by a multiple-looks hypothesis, for durations greater than about 20 ms. The slopes of the psychometric functions for decrement detection increased with decrement duration at a rate slightly greater than the square root of duration, for durations up to 50 ms, at all three frequencies. For greater durations, the increase in slope was less than proportional to the square root of duration. The results were analyzed using a model incorporating a simulated auditory filter, a compressive nonlinearity, a sliding temporal integrator, and a decision device based on a template mechanism. The model took into account the effects of both the external noise and an assumed internal

Systematic Luby Transform codes as incremental redundancy scheme

CSIR Research Space (South Africa)

Grobler, TL

2011-09-01

Full Text Available Transform Codes as Incremental Redundancy Scheme T. L. Grobler y, E. R. Ackermann y, J. C. Olivier y and A. J. van Zylz Department of Electrical, Electronic and Computer Engineering University of Pretoria, Pretoria 0002, South Africa Email: trienkog...@gmail.com, etienne.ackermann@ieee.org yDefence, Peace, Safety and Security (DPSS) Council for Scientific and Industrial Research (CSIR), Pretoria 0001, South Africa zDepartment of Mathematics and Applied Mathematics University of Pretoria, Pretoria 0002, South...

Deliberate and Crisis Action Planning and Execution Segments Increment 2A (DCAPES Inc 2A)

Science.gov (United States)

2016-03-01

2016 Major Automated Information System Annual Report Deliberate and Crisis Action Planning and Execution Segments Increment 2A (DCAPES Inc 2A...Program Name Deliberate and Crisis Action Planning and Execution Segments Increment 2A (DCAPES Inc 2A) DoD Component Air Force Responsible Office Program...APB) dated March 9, 2015 DCAPES Inc 2A 2016 MAR UNCLASSIFIED 4 Program Description Deliberate and Crisis Action Planning and Execution Segments

Deliberate and Crisis Action Planning and Execution Segments Increment 2B (DCAPES Inc 2B)

Science.gov (United States)

2016-03-01

2016 Major Automated Information System Annual Report Deliberate and Crisis Action Planning and Execution Segments Increment 2B (DCAPES Inc 2B...Information Program Name Deliberate and Crisis Action Planning and Execution Segments Increment 2B (DCAPES Inc 2B) DoD Component Air Force Responsible Office...been established. DCAPES Inc 2B 2016 MAR UNCLASSIFIED 4 Program Description Deliberate and Crisis Action Planning and Execution Segments (DCAPES) is

Automating the Incremental Evolution of Controllers for Physical Robots.

Science.gov (United States)

Faíña, Andrés; Jacobsen, Lars Toft; Risi, Sebastian

2017-01-01

Evolutionary robotics is challenged with some key problems that must be solved, or at least mitigated extensively, before it can fulfill some of its promises to deliver highly autonomous and adaptive robots. The reality gap and the ability to transfer phenotypes from simulation to reality constitute one such problem. Another lies in the embodiment of the evolutionary processes, which links to the first, but focuses on how evolution can act on real agents and occur independently from simulation, that is, going from being, as Eiben, Kernbach, & Haasdijk [2012, p. 261] put it, "the evolution of things, rather than just the evolution of digital objects.…" The work presented here investigates how fully autonomous evolution of robot controllers can be realized in hardware, using an industrial robot and a marker-based computer vision system. In particular, this article presents an approach to automate the reconfiguration of the test environment and shows that it is possible, for the first time, to incrementally evolve a neural robot controller for different obstacle avoidance tasks with no human intervention. Importantly, the system offers a high level of robustness and precision that could potentially open up the range of problems amenable to embodied evolution.

Incremental Observer Relative Data Extraction

DEFF Research Database (Denmark)

Bukauskas, Linas; Bøhlen, Michael Hanspeter

2004-01-01

The visual exploration of large databases calls for a tight coupling of database and visualization systems. Current visualization systems typically fetch all the data and organize it in a scene tree that is then used to render the visible data. For immersive data explorations in a Cave...... or a Panorama, where an observer is data space this approach is far from optimal. A more scalable approach is to make the observer-aware database system and to restrict the communication between the database and visualization systems to the relevant data. In this paper VR-tree, an extension of the R......-tree, is used to index visibility ranges of objects. We introduce a new operator for incremental Observer Relative data Extraction (iORDE). We propose the Volatile Access STructure (VAST), a lightweight main memory structure that is created on the fly and is maintained during visual data explorations. VAST...

Incrementally Detecting Change Types of Spatial Area Object: A Hierarchical Matching Method Considering Change Process

Directory of Open Access Journals (Sweden)

Yanhui Wang

2018-01-01

Full Text Available Detecting and extracting the change types of spatial area objects can track area objects’ spatiotemporal change pattern and provide the change backtracking mechanism for incrementally updating spatial datasets. To respond to the problems of high complexity of detection methods, high redundancy rate of detection factors, and the low automation degree during incrementally update process, we take into account the change process of area objects in an integrated way and propose a hierarchical matching method to detect the nine types of changes of area objects, while minimizing the complexity of the algorithm and the redundancy rate of detection factors. We illustrate in details the identification, extraction, and database entry of change types, and how we achieve a close connection and organic coupling of incremental information extraction and object type-of-change detection so as to characterize the whole change process. The experimental results show that this method can successfully detect incremental information about area objects in practical applications, with the overall accuracy reaching above 90%, which is much higher than the existing weighted matching method, making it quite feasible and applicable. It helps establish the corresponding relation between new-version and old-version objects, and facilitate the linked update processing and quality control of spatial data.

STS-102 Expedition 2 Increment and Science Briefing

Science.gov (United States)

2001-01-01

Merri Sanchez, Expedition 2 Increment Manager, John Uri, Increment Scientist, and Lybrease Woodard, Lead Payload Operations Director, give an overview of the upcoming activities and objectives of the Expedition 2's (E2's) mission in this prelaunch press conference. Ms. Sanchez describes the crew rotation of Expedition 1 to E2, the timeline E2 will follow during their stay on the International Space Station (ISS), and the various flights going to the ISS and what each will bring to ISS. Mr. Uri gives details on the on-board experiments that will take place on the ISS in the fields of microgravity research, commercial, earth, life, and space sciences (such as radiation characterization, H-reflex, colloids formation and interaction, protein crystal growth, plant growth, fermentation in microgravity, etc.). He also gives details on the scientific facilities to be used (laboratory racks and equipment such as the human torso facsimile or 'phantom torso'). Ms. Woodard gives an overview of Marshall Flight Center's role in the mission. Computerized simulations show the installation of the Space Station Remote Manipulator System (SSRMS) onto the ISS and the installation of the airlock using SSRMS. Live footage shows the interior of the ISS, including crew living quarters, the Progress Module, and the Destiny Laboratory. The three then answer questions from the press.

MUNIX and incremental stimulation MUNE in ALS patients and control subjects

DEFF Research Database (Denmark)

Furtula, Jasna; Johnsen, Birger; Christensen, Peter Broegger

2013-01-01

This study compares the new Motor Unit Number Estimation (MUNE) technique, MUNIX, with the more common incremental stimulation MUNE (IS-MUNE) with respect to reproducibility in healthy subjects and as potential biomarker of disease progression in patients with ALS....

Fault-tolerant incremental diagnosis with limited historical data

OpenAIRE

Gillblad, Daniel; Holst, Anders; Steinert, Rebecca

2006-01-01

In many diagnosis situations it is desirable to perform a classification in an iterative and interactive manner. All relevant information may not be available initially and must be acquired manually or at a cost. The matter is often complicated by very limited amounts of knowledge and examples when a new system to be diagnosed is initially brought into use. Here, we will describe how to create an incremental classification system based on a statistical model that is trained from empirical dat...

Improved incremental conductance method for maximum power point tracking using cuk converter

Directory of Open Access Journals (Sweden)

M. Saad Saoud

2014-03-01

Full Text Available The Algerian government relies on a strategy focused on the development of inexhaustible resources such as solar and uses to diversify energy sources and prepare the Algeria of tomorrow: about 40% of the production of electricity for domestic consumption will be from renewable sources by 2030, Therefore it is necessary to concentrate our forces in order to reduce the application costs and to increment their performances, Their performance is evaluated and compared through theoretical analysis and digital simulation. This paper presents simulation of improved incremental conductance method for maximum power point tracking (MPPT using DC-DC cuk converter. This improved algorithm is used to track MPPs because it performs precise control under rapidly changing Atmospheric conditions, Matlab/ Simulink were employed for simulation studies.

Statistics of a mixed Eulerian-Lagrangian velocity increment in fully developed turbulence

International Nuclear Information System (INIS)

Friedrich, R; Kamps, O; Grauer, R; Homann, H

2009-01-01

We investigate the relationship between Eulerian and Lagrangian probability density functions obtained from numerical simulations of two-dimensional as well as three-dimensional turbulence. We show that in contrast to the structure functions of the Lagrangian velocity increment δ τ v(y)=u(x(y, τ), τ)- u(y, 0), where u(x, t) denotes the Eulerian velocity and x(y, t) the particle path initially starting at x(y, 0)=y, the structure functions of the velocity increment δ τ w(y)=u(x(y, τ), τ)- u(y, τ) exhibit a wide range of scaling behavior. Similar scaling indices are detected for the structure functions for particles diffusing in frozen turbulent fields. Furthermore, we discuss a connection to the scaling of Eulerian transversal structure functions.

Factors for Radical Creativity, Incremental Creativity, and Routine, Noncreative Performance

Science.gov (United States)

Madjar, Nora; Greenberg, Ellen; Chen, Zheng

2011-01-01

This study extends theory and research by differentiating between routine, noncreative performance and 2 distinct types of creativity: radical and incremental. We also use a sensemaking perspective to examine the interplay of social and personal factors that may influence a person's engagement in a certain level of creative action versus routine,…

Development of the Nonstationary Incremental Analysis Update Algorithm for Sequential Data Assimilation System

Directory of Open Access Journals (Sweden)

Yoo-Geun Ham

2016-01-01

Full Text Available This study introduces a modified version of the incremental analysis updates (IAU, called the nonstationary IAU (NIAU method, to improve the assimilation accuracy of the IAU while keeping the continuity of the analysis. Similar to the IAU, the NIAU is designed to add analysis increments at every model time step to improve the continuity in the intermittent data assimilation. However, unlike the IAU, the NIAU procedure uses time-evolved forcing using the forward operator as corrections to the model. The solution of the NIAU is superior to that of the forward IAU, of which analysis is performed at the beginning of the time window for adding the IAU forcing, in terms of the accuracy of the analysis field. It is because, in the linear systems, the NIAU solution equals that in an intermittent data assimilation method at the end of the assimilation interval. To have the filtering property in the NIAU, a forward operator to propagate the increment is reconstructed with only dominant singular vectors. An illustration of those advantages of the NIAU is given using the simple 40-variable Lorenz model.

Adaptive scallop height tool path generation for robot-based incremental sheet metal forming

Science.gov (United States)

Seim, Patrick; Möllensiep, Dennis; Störkle, Denis Daniel; Thyssen, Lars; Kuhlenkötter, Bernd

2016-10-01

Incremental sheet metal forming is an emerging process for the production of individualized products or prototypes in low batch sizes and with short times to market. In these processes, the desired shape is produced by the incremental inward motion of the workpiece-independent forming tool in depth direction and its movement along the contour in lateral direction. Based on this shape production, the tool path generation is a key factor on e.g. the resulting geometric accuracy, the resulting surface quality, and the working time. This paper presents an innovative tool path generation based on a commercial milling CAM package considering the surface quality and working time. This approach offers the ability to define a specific scallop height as an indicator of the surface quality for specific faces of a component. Moreover, it decreases the required working time for the production of the entire component compared to the use of a commercial software package without this adaptive approach. Different forming experiments have been performed to verify the newly developed tool path generation. Mainly, this approach serves to solve the existing conflict of combining the working time and the surface quality within the process of incremental sheet metal forming.

A COMPARATIVE STUDY OF PREEMPTIVE USE OF 0.2% ROPIVACAINE AND 0.125% BUPIVACAINE ALONG WITH FENTANYL AND FENTANYL INCREMENTS TO PROVIDE POSTOPERATIVE EPIDURAL ANALGESIA UP TO 24 HOURS

Directory of Open Access Journals (Sweden)

Chiranji Lal Khedia

2016-06-01

Full Text Available BACKGROUND AND OBJECTIVES The present study was carried out to compare duration of analgesia, haemodynamic changes (Systolic and Diastolic Blood Pressure, Pulse Rate, Respiratory Rate, total incremental doses of epidural fentanyl required to maintain VAS 3 up to 24 hours in each group and total required incremental fentanyl doses were compared between both the groups. Once the data were collected from all the patients, they were compared using, chi-square test, two sample t-test. The p-value was calculated and P <0.05 was considered statistically significant. RESULTS The duration of analgesia was more with Group BF (245+17.58 min. than Group RF (217.6+22.41 min., thus it is concluded that difference in duration of analgesia was statistically significant between the groups (P<0.05. In this study, it was noticed that patients of Group RF required much more incremental doses of epidural fentanyl (218+31.88 μg to maintain VAS<3 up to 24 hours than group BF (170+32.27 μg, and difference was statistically significant (P<0.05. Haemodynamic parameters like SBP, DBP, HR and RR were comparable in both the groups. Hypotension and bradycardia were noted in two patients of group BF. CONCLUSION Duration of analgesia was longer and comparatively better in group BF and less incremental doses were required to maintain VAS <3 up to 24 hours as compared to group RF, but haemodynamic stability was more in group RF as compared to group BF.

Incremental natural gas resources through infield reserve growth/secondary natural gas recovery

Energy Technology Data Exchange (ETDEWEB)

Finley, R.J.; Levey, R.A.; Hardage, B.A.

1993-12-31

The primary objective of the Infield Reserve Growth/Secondary Natural Gas Recovery (SGR) project is to develop, test, and verify technologies and methodologies with near- to midterm potential for maximizing the recovery of natural gasfrom conventional reservoirs in known fields. Additional technical and technology transfer objectives of the SGR project include: To establish how depositional and diagenetic heterogeneities in reservoirs of conventional permeability cause reservoir compartmentalization and, hence, incomplete recovery of natural gas. To document examples of reserve growth occurrence and potential from fluvial and deltaic sandstones of the Texas gulf coast basin as a natural laboratory for developing concepts and testing applications to find secondary gas. To demonstrate how the integration of geology, reservoir engineering, geophysics, and well log analysis/petrophysics leads to strategic recompletion and well placement opportunities for reserve growth in mature fields. To transfer project results to a wide array of natural gas producers, not just as field case studies, but as conceptual models of how heterogeneities determine natural gas flow units and how to recognize the geologic and engineering clues that operators can use in a cost-effective manner to identify incremental, or secondary, gas.

Analysis of a piping system under seismic load using incremental hinge technique

International Nuclear Information System (INIS)

Ravi Kiran, A.; Agrawal, M.K.; Reddy, G.R.; Singh, R.K.; Vaze, K.K.; Ghosh, A.K.; Kushwaha, H.S.; Ramesh Babu, R.

2008-01-01

ASME Boiler and Pressure Vessel Code treats piping system as a series of components but not as an overall structural system. Limit analyses and collapse tests at component level are used to establish stress allowables on seismic stresses. The code does not consider the load redistributions and structural redundancy existing in piping systems that prevent system collapse even when one or more individual components loaded beyond their collapse levels. This necessitates a simple analytical method for evaluation of inelastic seismic response at system level. The present paper presents a simplified analytical procedure for predicting inelastic response of a typical piping system subjected to seismic load. The analytical method known as incremental hinge technique is based on plastic system behavior in which the yielded components are replaced with hinge models when a critical hinge moment is reached. It also takes into account the inelastic response spectrum reduction factors and displacement ductility. The analytical method is used to obtain the inelastic response, location of hinge formation and level of base excitation needed for hinge formation. The predicted hinge locations and hinge ordering is compared with the results of a shake table test conducted on the piping system. (author)

Investigação numérica do desempenho de um sensor de fibra ótica de índice de refração, baseado em SPR e utilizando COMSOL multiphysics

OpenAIRE

Santos, Diego Felipe de Nóbrega dos

2013-01-01

Esta tese é dedicada aos sensores de fibra ótica especificamente aos sensores baseados no fenómeno de ressonância de plasmão de superfície, SPR (Surface Plasmon Resonance), gerados em fibras óticas com configuração do tipo “D”, para aplicação em sensores refratométricos. Numa primeira parte desta dissertação são descritos os aspetos teóricos fundamentais para a compreensão dos fenómenos de ressonância de plasmões de superfície e a sua utilização em sistemas sensores. Estes f...

Sistema de Comunicação por voz, baseado em Voip, para a integração de comunicações móveis entre dois ou mais países

OpenAIRE

Branco, João António Peixoto

2018-01-01

O tema deste projeto é “Sistema de comunicação por voz, baseado em Voip, para a integração de comunicações móveis entre dois ou mais países” e pretende desenvolver uma solução para uma empresa de construção civil com o intuito de reduzir os gastos monetários das suas comunicações Internacionais (de Portugal para o estrangeiro e vice-versa). A solução foi desenvolvida de acordo com os requisitos propostos pela empresa. Para além da tecnologia Voip, como inicialmente prevista a ser utilizada...

Enthalpy increment measurements of Sr3Zr2O7(s) and Sr4Zr3O10(s)

International Nuclear Information System (INIS)

Banerjee, A.; Dash, S.; Prasad, R.; Venugopal, V.

1998-01-01

Enthalpy increment measurements on Sr 3 Zr 2 O 7 (s) and Sr 4 Zr 3 O 10 (s) were carried out using a Calvet micro-calorimeter. The enthalpy increment values were least squares analyzed with the constraints that H 0 (T)-H 0 (298.15 K) at 298.15 K equals to zero and C p 0 (298.15 K) equals to the estimated value. The dependence of enthalpy increment with temperature is given. (orig.)

Reliability and validity of the test of incremental respiratory endurance measures of inspiratory muscle performance in COPD

Directory of Open Access Journals (Sweden)

Formiga MF

2018-05-01

Full Text Available Magno F Formiga,1,2 Kathryn E Roach,1 Isabel Vital,3 Gisel Urdaneta,3 Kira Balestrini,3 Rafael A Calderon-Candelario,3,4 Michael A Campos,3,4,* Lawrence P Cahalin1,* 1Department of Physical Therapy, University of Miami Miller School of Medicine, Coral Gables, FL, USA; 2CAPES Foundation, Ministry of Education of Brazil, Brasilia, Brazil; 3Pulmonary Section, Miami Veterans Administration Medical Center, Miami, FL, USA; 4Division of Pulmonary, Allergy, Critical Care and Sleep Medicine, University of Miami Miller School of Medicine, Miami, FL, USA *These authors contributed equally to this work Purpose: The Test of Incremental Respiratory Endurance (TIRE provides a comprehensive assessment of inspiratory muscle performance by measuring maximal inspiratory pressure (MIP over time. The integration of MIP over inspiratory duration (ID provides the sustained maximal inspiratory pressure (SMIP. Evidence on the reliability and validity of these measurements in COPD is not currently available. Therefore, we assessed the reliability, responsiveness and construct validity of the TIRE measures of inspiratory muscle performance in subjects with COPD. Patients and methods: Test–retest reliability, known-groups and convergent validity assessments were implemented simultaneously in 81 male subjects with mild to very severe COPD. TIRE measures were obtained using the portable PrO2 device, following standard guidelines. Results: All TIRE measures were found to be highly reliable, with SMIP demonstrating the strongest test–retest reliability with a nearly perfect intraclass correlation coefficient (ICC of 0.99, while MIP and ID clustered closely together behind SMIP with ICC values of about 0.97. Our findings also demonstrated known-groups validity of all TIRE measures, with SMIP and ID yielding larger effect sizes when compared to MIP in distinguishing between subjects of different COPD status. Finally, our analyses confirmed convergent validity for both SMIP

When mere exposure leads to less liking: the incremental threat effect in intergroup contexts.

Science.gov (United States)

Crisp, Richard J; Hutter, Russell R C; Young, Bryony

2009-02-01

In two experiments we tested the hypothesis that repeated exposure to out-group-relevant attitude objects would lead to less liking following a threat to identity. In Experiment 1 exposure to abstract artwork ostensibly created by a member of an out-group university led to more liking under baseline conditions, but not following a manipulation of threat. In Experiment 2 we observed a negative relationship between exposure and liking following threat: liking reversed the typical mere exposure effect. Reported emotion mediated the interactive effect of threat and exposure on liking. These findings illustrate how social identity threat can be experienced incrementally as a function of exposure. We discuss the findings in the context of an integration of research on exposure, identity, attitudes, and contact.

Radical and Incremental Innovation Preferences in Information Technology: An Empirical Study in an Emerging Economy

Directory of Open Access Journals (Sweden)

Tarun K. Sen

2011-11-01

Full Text Available Radical and Incremental Innovation Preferences in Information Technology: An Empirical Study in an Emerging Economy Abstract Innovation in information technology is a primary driver for growth in developed economies. Research indicates that countries go through three stages in the adoption of innovation strategies: buying innovation through global trade, incremental innovation from other countries by enhancing efficiency, and, at the most developed stage, radically innovating independently for competitive advantage. The first two stages of innovation maturity depend more on cross-border trade than the third stage. In this paper, we find that IT professionals in in an emerging economy such as India believe in radical innovation over incremental innovation (adaptation as a growth strategy, even though competitive advantage may rest in adaptation. The results of the study report the preference for innovation strategies among IT professionals in India and its implications for other rapidly growing emerging economies.

Was the Conconi test validated by sporting success, expert opinion ...

African Journals Online (AJOL)

Was the Conconi test validated by sporting success, expert opinion or good science? ... Open Access DOWNLOAD FULL TEXT ... Despite scientific evidence to the contrary, a popular incremental field test for endurance athletes (Conconi Test) ...

Incremental Query Rewriting with Resolution

Science.gov (United States)

Riazanov, Alexandre; Aragão, Marcelo A. T.

We address the problem of semantic querying of relational databases (RDB) modulo knowledge bases using very expressive knowledge representation formalisms, such as full first-order logic or its various fragments. We propose to use a resolution-based first-order logic (FOL) reasoner for computing schematic answers to deductive queries, with the subsequent translation of these schematic answers to SQL queries which are evaluated using a conventional relational DBMS. We call our method incremental query rewriting, because an original semantic query is rewritten into a (potentially infinite) series of SQL queries. In this chapter, we outline the main idea of our technique - using abstractions of databases and constrained clauses for deriving schematic answers, and provide completeness and soundness proofs to justify the applicability of this technique to the case of resolution for FOL without equality. The proposed method can be directly used with regular RDBs, including legacy databases. Moreover, we propose it as a potential basis for an efficient Web-scale semantic search technology.

An Incremental Weighted Least Squares Approach to Surface Lights Fields

Science.gov (United States)

Coombe, Greg; Lastra, Anselmo

An Image-Based Rendering (IBR) approach to appearance modelling enables the capture of a wide variety of real physical surfaces with complex reflectance behaviour. The challenges with this approach are handling the large amount of data, rendering the data efficiently, and previewing the model as it is being constructed. In this paper, we introduce the Incremental Weighted Least Squares approach to the representation and rendering of spatially and directionally varying illumination. Each surface patch consists of a set of Weighted Least Squares (WLS) node centers, which are low-degree polynomial representations of the anisotropic exitant radiance. During rendering, the representations are combined in a non-linear fashion to generate a full reconstruction of the exitant radiance. The rendering algorithm is fast, efficient, and implemented entirely on the GPU. The construction algorithm is incremental, which means that images are processed as they arrive instead of in the traditional batch fashion. This human-in-the-loop process enables the user to preview the model as it is being constructed and to adapt to over-sampling and under-sampling of the surface appearance.

Incremental Ontology-Based Extraction and Alignment in Semi-structured Documents

Science.gov (United States)

Thiam, Mouhamadou; Bennacer, Nacéra; Pernelle, Nathalie; Lô, Moussa

SHIRIis an ontology-based system for integration of semi-structured documents related to a specific domain. The system’s purpose is to allow users to access to relevant parts of documents as answers to their queries. SHIRI uses RDF/OWL for representation of resources and SPARQL for their querying. It relies on an automatic, unsupervised and ontology-driven approach for extraction, alignment and semantic annotation of tagged elements of documents. In this paper, we focus on the Extract-Align algorithm which exploits a set of named entity and term patterns to extract term candidates to be aligned with the ontology. It proceeds in an incremental manner in order to populate the ontology with terms describing instances of the domain and to reduce the access to extern resources such as Web. We experiment it on a HTML corpus related to call for papers in computer science and the results that we obtain are very promising. These results show how the incremental behaviour of Extract-Align algorithm enriches the ontology and the number of terms (or named entities) aligned directly with the ontology increases.

Lines of Evidence–Incremental Markings in Molar Enamel of Soay Sheep as Revealed by a Fluorochrome Labeling and Backscattered Electron Imaging Study

Science.gov (United States)

Kierdorf, Horst; Kierdorf, Uwe; Frölich, Kai; Witzel, Carsten

2013-01-01

We studied the structural characteristics and periodicities of regular incremental markings in sheep enamel using fluorochrome injections for vital labeling of forming enamel and backscattered electron imaging in the scanning electron microscope. Microscopic analysis of mandibular first molars revealed the presence of incremental markings with a daily periodicity (laminations) that indicated successive positions of the forming front of interprismatic enamel. In addition to the laminations, incremental markings with a sub-daily periodicity were discernible both in interprismatic enamel and in enamel prisms. Five sub-daily increments were present between two consecutive laminations. Backscattered electron imaging revealed that each sub-daily growth increment consisted of a broader and more highly mineralized band and a narrower and less mineralized band (line). The sub-daily markings in the prisms of sheep enamel morphologically resembled the (daily) prisms cross striations seen in primate enamel. Incremental markings with a supra-daily periodicity were not observed in sheep enamel. Based on the periodicity of the incremental markings, maximum mean daily apposition rates of 17.0 µm in buccal enamel and of 13.4 µm in lingual enamel were recorded. Enamel extension rates were also high, with maximum means of 180 µm/day and 217 µm/day in upper crown areas of buccal and lingual enamel, respectively. Values in more cervical crown portions were markedly lower. Our results are in accordance with previous findings in other ungulate species. Using the incremental markings present in primate enamel as a reference could result in a misinterpretation of the incremental markings in ungulate enamel. Thus, the sub-daily growth increments in the prisms of ungulate enamel might be mistaken as prism cross striations with a daily periodicity, and the laminations misidentified as striae of Retzius with a supra-daily periodicity. This would lead to a considerable overestimation of

EMG spectral analysis of incremental exercise in cyclists and non-cyclists using Fourier and Wavelet transforms

Directory of Open Access Journals (Sweden)

Marcelo Vitor da Costa

2012-10-01

Full Text Available http://dx.doi.org/10.5007/1980-0037.2012v14n6p660 The aim of this study was to compare the electromyographic indices of fatigue (slope of median frequency calculated with the fast Fourier transform (FFT and wavelet transform (WT in trained and untrained individuals during cycle exercise. A second objective was to compare the variance of the spectral parameters (median frequency - MF obtained by the FFT and WT during exercise. Twelve cyclists and non-cyclists performed a maximal incremental test to determine the peak power (Wp and electromyographic activity of the vastus lateralis (VL, rectus femoris (RF, biceps femoris (BF, semitendinous (ST and tibialis anterior (TA. Mean values of median frequency, determined by the FFT and WT, were used for the spectral analysis of the electromyographic signals of the studied muscles. The analyzed parameters were obtained for each time period corresponding to 0, 25, 50, 75, and 100% of total duration of the maximal incremental test. No statistically significant differences were found in the values of MF and electromyographic indices of fatigue between the two techniques (FT and WT both in the cyclists and non-cyclists group (P>0.05. Regarding the MF variance, statistically significant differences were found in all analyzed muscles, as well as in different time periods, both in the cyclists and non-cyclists groups when comparing the FFT and WT techniques (P<0.05. The WT seems to be more adequate to dynamic tasks, since it does not require the signal to be quasi-stationary, unlike the limitation imposed upon the use of the FFT.

A parallel ILP algorithm that incorporates incremental batch learning

OpenAIRE

Nuno Fonseca; Rui Camacho; Fernado Silva

2003-01-01

In this paper we tackle the problems of eciency and scala-bility faced by Inductive Logic Programming (ILP) systems. We proposethe use of parallelism to improve eciency and the use of an incrementalbatch learning to address the scalability problem. We describe a novelparallel algorithm that incorporates into ILP the method of incremen-tal batch learning. The theoretical complexity of the algorithm indicatesthat a linear speedup can be achieved.

Partial and incremental PCMH practice transformation: implications for quality and costs.

Science.gov (United States)

Paustian, Michael L; Alexander, Jeffrey A; El Reda, Darline K; Wise, Chris G; Green, Lee A; Fetters, Michael D

2014-02-01

To examine the associations between partial and incremental implementation of the Patient Centered Medical Home (PCMH) model and measures of cost and quality of care. We combined validated, self-reported PCMH capabilities data with administrative claims data for a diverse statewide population of 2,432 primary care practices in Michigan. These data were supplemented with contextual data from the Area Resource File. We measured medical home capabilities in place as of June 2009 and change in medical home capabilities implemented between July 2009 and June 2010. Generalized estimating equations were used to estimate the mean effect of these PCMH measures on total medical costs and quality of care delivered in physician practices between July 2009 and June 2010, while controlling for potential practice, patient cohort, physician organization, and practice environment confounders. Based on the observed relationships for partial implementation, full implementation of the PCMH model is associated with a 3.5 percent higher quality composite score, a 5.1 percent higher preventive composite score, and $26.37 lower per member per month medical costs for adults. Full PCMH implementation is also associated with a 12.2 percent higher preventive composite score, but no reductions in costs for pediatric populations. Incremental improvements in PCMH model implementation yielded similar positive effects on quality of care for both adult and pediatric populations but were not associated with cost savings for either population. Estimated effects of the PCMH model on quality and cost of care appear to improve with the degree of PCMH implementation achieved and with incremental improvements in implementation. © Health Research and Educational Trust.

An Integrated Modelling and Toolpathing Approach for a Frameless Stressed Skin Structure, Fabricated Using Robotic Incremental Sheet Forming

DEFF Research Database (Denmark)

Nicholas, Paul; Stasiuk, David; Nørgaard, Esben Clausen

2016-01-01

with performance implications at material, element and structural scales. This paper briefly presents ISF as a method of fabrication, and introduces the context of structures where the skin plays an integral role. It describes the development of an integrated approach for the modelling and fabrication of Stressed...... Skins, an incrementally formed sheet metal structure. The paper then focus upon the use of prototypes and empirical testing as means to inform digital models about fabrication and material parameters including: material forming limits and thinning; the parameterisation of macro and meso simulations...

An Empirical Analysis of Incremental Capital Structure Decisions Under Managerial Entrenchment

NARCIS (Netherlands)

de Jong, A.; Veld, C.H.

1998-01-01

We study incremental capital structure decisions of Dutch companies. From 1977 to 1996 these companies have made 110 issues of public and private seasoned equity and 137 public issues of straight debt. Managers of Dutch companies are entrenched. For this reason a discrepancy exists between

The effects of the pine processionary moth on the increment of ...

African Journals Online (AJOL)

STORAGESEVER

2009-05-18

May 18, 2009 ... sycophanta L. (Coleoptera: Carabidae) used against the pine processionary moth (Thaumetopoea pityocampa Den. & Schiff.) (Lepidoptera: Thaumetopoeidae) in biological control. T. J. Zool. 30:181-185. Kanat M, Sivrikaya F (2005). Effect of the pine processionary moth on diameter increment of Calabrian ...

Substructuring in the implicit simulation of single point incremental sheet forming

NARCIS (Netherlands)

Hadoush, A.; van den Boogaard, Antonius H.

2009-01-01

This paper presents a direct substructuring method to reduce the computing time of implicit simulations of single point incremental forming (SPIF). Substructuring is used to divide the finite element (FE) mesh into several non-overlapping parts. Based on the hypothesis that plastic deformation is

Exercise testing in Warmblood sport horses under field conditions.

Science.gov (United States)

Munsters, Carolien C B M; van Iwaarden, Alexandra; van Weeren, René; Sloet van Oldruitenborgh-Oosterbaan, Marianne M

2014-10-01

Regular exercise testing in Warmblood sport horses may, as in racing, potentially help to characterise fitness indices in different disciplines and at various competition levels and assist in understanding when a horse is 'fit to compete'. In this review an overview is given of the current state of the art of exercise testing in the Olympic disciplines of eventing, show jumping and dressage, and areas for further development are defined. In event horses, a simple four-step incremental exercise test measuring heart rate (HR), lactate concentration (LA) and velocity (V) is most often used. In dressage and riding horses, a wide variety of exercise tests have been developed, including incremental exercise tests, indoor riding tests and lunging tests. In show jumping, the use of a five-step incremental exercise test and exercise tests evaluating technical skills and fatigue of the horse has been reported. The velocity at a plasma LA of 4 mmol/L (VLA4) and HR recovery during submaximal exercise intensity have been shown to be the best parameters in event horses for predicting performance and impending injuries. In riding horses, the fitness level of horses is also an important determinant of injuries. Implementation of regular exercise testing and monitoring of training sessions may have important added value in the assessment of performance ability and potential future injuries in Warmblood sport horses. However, there is an urgent need to standardise methodologies and outcome parameters in order to make results comparable. Copyright © 2014 Elsevier Ltd. All rights reserved.

The scope of application of incremental rapid prototyping methods in foundry engineering

Directory of Open Access Journals (Sweden)

M. Stankiewicz

2010-01-01

Full Text Available The article presents the scope of application of selected incremental Rapid Prototyping methods in the process of manufacturing casting models, casting moulds and casts. The Rapid Prototyping methods (SL, SLA, FDM, 3DP, JS are predominantly used for the production of models and model sets for casting moulds. The Rapid Tooling methods, such as: ZCast-3DP, ProMetalRCT and VoxelJet, enable the fabrication of casting moulds in the incremental process. The application of the RP methods in cast production makes it possible to speed up the prototype preparation process. This is particularly vital to elements of complex shapes. The time required for the manufacture of the model, the mould and the cast proper may vary from a few to several dozen hours.

EFFECTS OF RATION SIZE AND TEMPERATURE ON MOULT INCREMENT AND METABOLIC PARAMETERS OF JUVENILE NOBLE CRAYFISH, ASTACUS ASTACUS

Directory of Open Access Journals (Sweden)

RENAI B.

2007-07-01

Full Text Available A laboratory experiment was carried out to test the combined effects of ration size (1 vs 3% body weight, b.w. and temperature (15 ± 2 vs 22 ± 2 °C on moult increment and metabolic parameters of 80 juvenile noble crayfish (Astacus astacus. The maximum daily consumption (Cmax and respiration rate (R were used to calculate the growth scope (i.e. the difference between maximum daily energy consumption and energy costs at a given temperature. The conversion of R into a food-equivalent unit allowed the comparison with Cmax. Results showed that crayfish obtained the maximum moult increment when fed 3% b.w. while temperature seemed to play a less relevant role on growth rate per moult, affecting only the moulting frequency. Crayfish A. astacus fed ad libitum showed a relative insensitivity to the metabolic parameters (oxygen uptake, R and Cmax within the analysed range of temperatures, possibly as a reflection of this “species” distribution across a broad variety of habitats with different thermal regimes. In the present study, A. astacus displayed characteristics proper of a K-selected species, as slow to moderate growth.

Incremental learning of concept drift in nonstationary environments.

Science.gov (United States)

Elwell, Ryan; Polikar, Robi

2011-10-01

We introduce an ensemble of classifiers-based approach for incremental learning of concept drift, characterized by nonstationary environments (NSEs), where the underlying data distributions change over time. The proposed algorithm, named Learn(++). NSE, learns from consecutive batches of data without making any assumptions on the nature or rate of drift; it can learn from such environments that experience constant or variable rate of drift, addition or deletion of concept classes, as well as cyclical drift. The algorithm learns incrementally, as other members of the Learn(++) family of algorithms, that is, without requiring access to previously seen data. Learn(++). NSE trains one new classifier for each batch of data it receives, and combines these classifiers using a dynamically weighted majority voting. The novelty of the approach is in determining the voting weights, based on each classifier's time-adjusted accuracy on current and past environments. This approach allows the algorithm to recognize, and act accordingly, to the changes in underlying data distributions, as well as to a possible reoccurrence of an earlier distribution. We evaluate the algorithm on several synthetic datasets designed to simulate a variety of nonstationary environments, as well as a real-world weather prediction dataset. Comparisons with several other approaches are also included. Results indicate that Learn(++). NSE can track the changing environments very closely, regardless of the type of concept drift. To allow future use, comparison and benchmarking by interested researchers, we also release our data used in this paper. © 2011 IEEE

Classifier-ensemble incremental-learning procedure for nuclear transient identification at different operational conditions

Energy Technology Data Exchange (ETDEWEB)

Baraldi, Piero, E-mail: piero.baraldi@polimi.i [Dipartimento di Energia - Sezione Ingegneria Nucleare, Politecnico di Milano, via Ponzio 34/3, 20133 Milano (Italy); Razavi-Far, Roozbeh [Dipartimento di Energia - Sezione Ingegneria Nucleare, Politecnico di Milano, via Ponzio 34/3, 20133 Milano (Italy); Zio, Enrico [Dipartimento di Energia - Sezione Ingegneria Nucleare, Politecnico di Milano, via Ponzio 34/3, 20133 Milano (Italy); Ecole Centrale Paris-Supelec, Paris (France)

2011-04-15

An important requirement for the practical implementation of empirical diagnostic systems is the capability of classifying transients in all plant operational conditions. The present paper proposes an approach based on an ensemble of classifiers for incrementally learning transients under different operational conditions. New classifiers are added to the ensemble where transients occurring in new operational conditions are not satisfactorily classified. The construction of the ensemble is made by bagging; the base classifier is a supervised Fuzzy C Means (FCM) classifier whose outcomes are combined by majority voting. The incremental learning procedure is applied to the identification of simulated transients in the feedwater system of a Boiling Water Reactor (BWR) under different reactor power levels.

Classifier-ensemble incremental-learning procedure for nuclear transient identification at different operational conditions

International Nuclear Information System (INIS)

Baraldi, Piero; Razavi-Far, Roozbeh; Zio, Enrico

2011-01-01

An important requirement for the practical implementation of empirical diagnostic systems is the capability of classifying transients in all plant operational conditions. The present paper proposes an approach based on an ensemble of classifiers for incrementally learning transients under different operational conditions. New classifiers are added to the ensemble where transients occurring in new operational conditions are not satisfactorily classified. The construction of the ensemble is made by bagging; the base classifier is a supervised Fuzzy C Means (FCM) classifier whose outcomes are combined by majority voting. The incremental learning procedure is applied to the identification of simulated transients in the feedwater system of a Boiling Water Reactor (BWR) under different reactor power levels.

Incremental inverse kinematics based vision servo for autonomous robotic capture of non-cooperative space debris

Science.gov (United States)

Dong, Gangqi; Zhu, Z. H.

2016-04-01

This paper proposed a new incremental inverse kinematics based vision servo approach for robotic manipulators to capture a non-cooperative target autonomously. The target's pose and motion are estimated by a vision system using integrated photogrammetry and EKF algorithm. Based on the estimated pose and motion of the target, the instantaneous desired position of the end-effector is predicted by inverse kinematics and the robotic manipulator is moved incrementally from its current configuration subject to the joint speed limits. This approach effectively eliminates the multiple solutions in the inverse kinematics and increases the robustness of the control algorithm. The proposed approach is validated by a hardware-in-the-loop simulation, where the pose and motion of the non-cooperative target is estimated by a real vision system. The simulation results demonstrate the effectiveness and robustness of the proposed estimation approach for the target and the incremental control strategy for the robotic manipulator.

One Size Does Not Fit All: Managing Radical and Incremental Creativity

Science.gov (United States)

Gilson, Lucy L.; Lim, Hyoun Sook; D'Innocenzo, Lauren; Moye, Neta

2012-01-01

This research extends creativity theory by re-conceptualizing creativity as a two-dimensional construct (radical and incremental) and examining the differential effects of intrinsic motivation, extrinsic rewards, and supportive supervision on perceptions of creativity. We hypothesize and find two distinct types of creativity that are associated…

The intermetallic ThRh5: microstructure and enthalpy increments

International Nuclear Information System (INIS)

Banerjee, Aparna; Joshi, A.R.; Kaity, Santu; Mishra, R.; Roy, S.B.

2013-01-01

Actinide intermetallics are one of the most interesting and important series of compounds. Thermochemistry of these compounds play significant role in understand the nature of bonding in alloys and nuclear fuel performance. In the present paper we report synthesis and characterization of thorium based intermetallic compound ThRh 5 (s) by SEM/EDX technique. The mechanical properties and enthalpy increment as a function of temperature of the alloy has been measured. (author)

Efficient Incremental Garbage Collection for Workstation/Server Database Systems

OpenAIRE

Amsaleg , Laurent; Gruber , Olivier; Franklin , Michael

1994-01-01

Projet RODIN; We describe an efficient server-based algorithm for garbage collecting object-oriented databases in a workstation/server environment. The algorithm is incremental and runs concurrently with client transactions, however, it does not hold any locks on data and does not require callbacks to clients. It is fault tolerant, but performs very little logging. The algorithm has been designed to be integrated into existing OODB systems, and therefore it works with standard implementation ...

Incremental validity of positive and negative valence in predicting personality disorder.

Science.gov (United States)

Simms, Leonard J; Yufik, Tom; Gros, Daniel F

2010-04-01

The Big Seven model of personality includes five dimensions similar to the Big Five model as well as two evaluative dimensions—Positive Valence (PV) and Negative Valence (NV)—which reflect extremely positive and negative person descriptors, respectively. Recent theory and research have suggested that PV and NV predict significant variance in personality disorder (PD) above that predicted by the Big Five, but firm conclusions have not been possible because previous studies have been limited to only single measures of PV, NV, and the Big Five traits. In the present study, we replicated and extended previous findings using three markers of all key constructs—including PV, NV, and the Big Five—in a diverse sample of 338 undergraduates. Results of hierarchical multiple regression analyses revealed that PV incrementally predicted Narcissistic and Histrionic PDs above the Big Five and that NV nonspecifically incremented the prediction of most PDs. Implications for dimensional models of personality pathology are discussed. PsycINFO Database Record (c) 2010 APA, all rights reserved.

Optimal set of grid size and angular increment for practical dose calculation using the dynamic conformal arc technique: a systematic evaluation of the dosimetric effects in lung stereotactic body radiation therapy

International Nuclear Information System (INIS)

Park, Ji-Yeon; Kim, Siyong; Park, Hae-Jin; Lee, Jeong-Woo; Kim, Yeon-Sil; Suh, Tae-Suk

2014-01-01

To recommend the optimal plan parameter set of grid size and angular increment for dose calculations in treatment planning for lung stereotactic body radiation therapy (SBRT) using dynamic conformal arc therapy (DCAT) considering both accuracy and computational efficiency. Dose variations with varying grid sizes (2, 3, and 4 mm) and angular increments (2°, 4°, 6°, and 10°) were analyzed in a thorax phantom for 3 spherical target volumes and in 9 patient cases. A 2-mm grid size and 2° angular increment are assumed sufficient to serve as reference values. The dosimetric effect was evaluated using dose–volume histograms, monitor units (MUs), and dose to organs at risk (OARs) for a definite volume corresponding to the dose–volume constraint in lung SBRT. The times required for dose calculations using each parameter set were compared for clinical practicality. Larger grid sizes caused a dose increase to the structures and required higher MUs to achieve the target coverage. The discrete beam arrangements at each angular increment led to over- and under-estimated OARs doses due to the undulating dose distribution. When a 2° angular increment was used in both studies, a 4-mm grid size changed the dose variation by up to 3–4% (50 cGy) for the heart and the spinal cord, while a 3-mm grid size produced a dose difference of <1% (12 cGy) in all tested OARs. When a 3-mm grid size was employed, angular increments of 6° and 10° caused maximum dose variations of 3% (23 cGy) and 10% (61 cGy) in the spinal cord, respectively, while a 4° increment resulted in a dose difference of <1% (8 cGy) in all cases except for that of one patient. The 3-mm grid size and 4° angular increment enabled a 78% savings in computation time without making any critical sacrifices to dose accuracy. A parameter set with a 3-mm grid size and a 4° angular increment is found to be appropriate for predicting patient dose distributions with a dose difference below 1% while reducing the

An Environment for Incremental Development of Distributed Extensible Asynchronous Real-time Systems

Science.gov (United States)

Ames, Charles K.; Burleigh, Scott; Briggs, Hugh C.; Auernheimer, Brent

1996-01-01

Incremental parallel development of distributed real-time systems is difficult. Architectural techniques and software tools developed at the Jet Propulsion Laboratory's (JPL's) Flight System Testbed make feasible the integration of complex systems in various stages of development.

A gradient surface produced by combined electroplating and incremental frictional sliding

DEFF Research Database (Denmark)

Yu, Tianbo; Hong, Chuanshi; Kitamura, K.

2017-01-01

A Cu plate was first electroplated with a Ni layer, with a thickness controlled to be between 1 and 2 mu m. The coated surface was then deformed by incremental frictional sliding with liquid nitrogen cooling. The combined treatment led to a multifunctional surface with a gradient in strain...

Relationship between work rate and oxygen uptake in mitochondrial myopathy during ramp-incremental exercise

Directory of Open Access Journals (Sweden)

A.C. Gimenes

2011-04-01

Full Text Available We determined the response characteristics and functional correlates of the dynamic relationship between the rate (Δ of oxygen consumption ( O2 and the applied power output (work rate = WR during ramp-incremental exercise in patients with mitochondrial myopathy (MM. Fourteen patients (7 males, age 35.4 ± 10.8 years with biopsy-proven MM and 10 sedentary controls (6 males, age 29.0 ± 7.8 years took a ramp-incremental cycle ergometer test for the determination of the O2 on-exercise mean response time (MRT and the gas exchange threshold (GET. The ΔO2/ΔWR slope was calculated up to GET (S1, above GET (S2 and over the entire linear portion of the response (S T. Knee muscle endurance was measured by isokinetic dynamometry. As expected, peak O2 and muscle performance were lower in patients than controls (P O2/ΔWR than controls, especially the S2 component (6.8 ± 1.5 vs 10.3 ± 0.6 mL·min-1·W-1, respectively; P O2/ΔWR (S T and muscle endurance, MRT-O2, GET and peak O2 in MM patients (P O2/ΔWR below 8 mL·min-1·W-1 had severely reduced peak O2 values (O2 had lower ΔO2/ΔWR (P O2/ΔWR is typically reduced in patients with MM, being related to increased functional impairment and higher cardiopulmonary stress.

The more you learn, the less you store : Memory-controlled incremental SVM for visual place recognition

OpenAIRE

Pronobis, Andrzej; Jie, Luo; Caputo, Barbara

2010-01-01

The capability to learn from experience is a key property for autonomous cognitive systems working in realistic settings. To this end, this paper presents an SVM-based algorithm, capable of learning model representations incrementally while keeping under control memory requirements. We combine an incremental extension of SVMs [43] with a method reducing the number of support vectors needed to build the decision function without any loss in performance [15] introducing a parameter which permit...

Distance-independent individual tree diameter-increment model for Thuya [Tetraclinis articulata (VAHL. MAST.] stands in Tunisia

Directory of Open Access Journals (Sweden)

T. Sghaier

2013-12-01

Full Text Available Aim of study: The aim of the work was to develop an individual tree diameter-increment model for Thuya (Tetraclinis articulata in Tunisia.Area of study: The natural Tetraclinis articulata stands at Jbel Lattrech in north-eastern of Tunisia.Material and methods:  Data came from 200 trees located in 50 sample plots. The diameter at age t and the diameter increment for the last five years obtained from cores taken at breast height were measured for each tree. Four difference equations derived from the base functions of Richards, Lundqvist, Hossfeld IV and Weibull were tested using the age-independent formulations of the growth functions. Both numerical and graphical analyses were used to evaluate the performance of the candidate models.Main results: Based on the analysis, the age-independent difference equation derived from the base function Richards model was selected. Two of the three parameters (growth rate and shape parameter of the retained model were related to site quality, represented by a Growth Index, stand density and the basal area in larger trees divided by diameter of the subject tree expressing the inter-tree competition.Research highlights: The proposed model can be useful for predicting the diameter growth of Tetraclinis articulata in Tunisia when age is not available or for trees growing in uneven-aged stands.Keywords: Age-independent growth model; difference equations; Tetraclinis articulata; Tunisia.

Analysis of single-degree-of-freedom piezoelectric energy harvester with stopper by incremental harmonic balance method

Science.gov (United States)

Zhao, Dan; Wang, Xiaoman; Cheng, Yuan; Liu, Shaogang; Wu, Yanhong; Chai, Liqin; Liu, Yang; Cheng, Qianju

2018-05-01

Piecewise-linear structure can effectively broaden the working frequency band of the piezoelectric energy harvester, and improvement of its research can promote the practical process of energy collection device to meet the requirements for powering microelectronic components. In this paper, the incremental harmonic balance (IHB) method is introduced for the complicated and difficult analysis process of the piezoelectric energy harvester to solve these problems. After obtaining the nonlinear dynamic equation of the single-degree-of-freedom piecewise-linear energy harvester by mathematical modeling and the equation is solved based on the IHB method, the theoretical amplitude-frequency curve of open-circuit voltage is achieved. Under 0.2 g harmonic excitation, a piecewise-linear energy harvester is experimentally tested by unidirectional frequency-increasing scanning. The results demonstrate that the theoretical and experimental amplitudes have the same trend, and the width of the working band with high voltage output are 4.9 Hz and 4.7 Hz, respectively, and the relative error is 4.08%. The open-output peak voltage are 21.53 V and 18.25 V, respectively, and the relative error is 15.23%. Since the theoretical value is consistent with the experimental results, the theoretical model and the incremental harmonic balance method used in this paper are suitable for solving single-degree-of-freedom piecewise-linear piezoelectric energy harvester and can be applied to further parameter optimized design.

Incremental health care utilization and costs for acute otitis media in children.

Science.gov (United States)

Ahmed, Sameer; Shapiro, Nina L; Bhattacharyya, Neil

2014-01-01

Determine the incremental health care costs associated with the diagnosis and treatment of acute otitis media (AOM) in children. Cross-sectional analysis of a national health-care cost database. Pediatric patients (age children with and without a diagnosis of AOM, adjusting for age, sex, region, race, ethnicity, insurance coverage, and Charlson comorbidity Index. A total of 8.7 ± 0.4 million children were diagnosed with AOM (10.7 ± 0.4% annually, mean age 5.3 years, 51.3% male) among 81.5 ± 2.3 million children sampled (mean age 8.9 years, 51.3% male). Children with AOM manifested an additional +2.0 office visits, +0.2 emergency department visits, and +1.6 prescription fills (all P <0.001) per year versus those without AOM, adjusting for demographics and medical comorbidities. Similarly, AOM was associated with an incremental increase in outpatient health care costs of $314 per child annually (P <0.001) and an increase of $17 in patient medication costs (P <0.001), but was not associated with an increase in total prescription expenses ($13, P = 0.766). The diagnosis of AOM confers a significant incremental health-care utilization burden on both patients and the health care system. With its high prevalence across the United States, pediatric AOM accounts for approximately $2.88 billion in added health care expense annually and is a significant health-care utilization concern. © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

Robust flight control using incremental nonlinear dynamic inversion and angular acceleration prediction

NARCIS (Netherlands)

Sieberling, S.; Chu, Q.P.; Mulder, J.A.

2010-01-01

This paper presents a flight control strategy based on nonlinear dynamic inversion. The approach presented, called incremental nonlinear dynamic inversion, uses properties of general mechanical systems and nonlinear dynamic inversion by feeding back angular accelerations. Theoretically, feedback of

Applying and Individual-Based Model to Simultaneously Evaluate Net Ecosystem Production and Tree Diameter Increment

Science.gov (United States)

Fang, F. J.

2017-12-01

Reconciling observations at fundamentally different scales is central in understanding the global carbon cycle. This study investigates a model-based melding of forest inventory data, remote-sensing data and micrometeorological-station data ("flux towers" estimating forest heat, CO2 and H2O fluxes). The individual tree-based model FORCCHN was used to evaluate the tree DBH increment and forest carbon fluxes. These are the first simultaneous simulations of the forest carbon budgets from flux towers and individual-tree growth estimates of forest carbon budgets using the continuous forest inventory data — under circumstances in which both predictions can be tested. Along with the global implications of such findings, this also improves the capacity for forest sustainable management and the comprehensive understanding of forest ecosystems. In forest ecology, diameter at breast height (DBH) of a tree significantly determines an individual tree's cross-sectional sapwood area, its biomass and carbon storage. Evaluation the annual DBH increment (ΔDBH) of an individual tree is central to understanding tree growth and forest ecology. Ecosystem Carbon flux is a consequence of key ecosystem processes in the forest-ecosystem carbon cycle, Gross and Net Primary Production (GPP and NPP, respectively) and Net Ecosystem Respiration (NEP). All of these closely relate with tree DBH changes and tree death. Despite advances in evaluating forest carbon fluxes with flux towers and forest inventories for individual tree ΔDBH, few current ecological models can simultaneously quantify and predict the tree ΔDBH and forest carbon flux.

Rapid Transfer Alignment of MEMS SINS Based on Adaptive Incremental Kalman Filter.

Science.gov (United States)

Chu, Hairong; Sun, Tingting; Zhang, Baiqiang; Zhang, Hongwei; Chen, Yang

2017-01-14

In airborne MEMS SINS transfer alignment, the error of MEMS IMU is highly environment-dependent and the parameters of the system model are also uncertain, which may lead to large error and bad convergence of the Kalman filter. In order to solve this problem, an improved adaptive incremental Kalman filter (AIKF) algorithm is proposed. First, the model of SINS transfer alignment is defined based on the "Velocity and Attitude" matching method. Then the detailed algorithm progress of AIKF and its recurrence formulas are presented. The performance and calculation amount of AKF and AIKF are also compared. Finally, a simulation test is designed to verify the accuracy and the rapidity of the AIKF algorithm by comparing it with KF and AKF. The results show that the AIKF algorithm has better estimation accuracy and shorter convergence time, especially for the bias of the gyroscope and the accelerometer, which can meet the accuracy and rapidity requirement of transfer alignment.

Rapid Transfer Alignment of MEMS SINS Based on Adaptive Incremental Kalman Filter

Directory of Open Access Journals (Sweden)

Hairong Chu

2017-01-01

Full Text Available In airborne MEMS SINS transfer alignment, the error of MEMS IMU is highly environment-dependent and the parameters of the system model are also uncertain, which may lead to large error and bad convergence of the Kalman filter. In order to solve this problem, an improved adaptive incremental Kalman filter (AIKF algorithm is proposed. First, the model of SINS transfer alignment is defined based on the “Velocity and Attitude” matching method. Then the detailed algorithm progress of AIKF and its recurrence formulas are presented. The performance and calculation amount of AKF and AIKF are also compared. Finally, a simulation test is designed to verify the accuracy and the rapidity of the AIKF algorithm by comparing it with KF and AKF. The results show that the AIKF algorithm has better estimation accuracy and shorter convergence time, especially for the bias of the gyroscope and the accelerometer, which can meet the accuracy and rapidity requirement of transfer alignment.

On the search for an appropriate metric for reaction time to suprathreshold increments and decrements.

Science.gov (United States)

Vassilev, Angel; Murzac, Adrian; Zlatkova, Margarita B; Anderson, Roger S

2009-03-01

Weber contrast, DeltaL/L, is a widely used contrast metric for aperiodic stimuli. Zele, Cao & Pokorny [Zele, A. J., Cao, D., & Pokorny, J. (2007). Threshold units: A correct metric for reaction time? Vision Research, 47, 608-611] found that neither Weber contrast nor its transform to detection-threshold units equates human reaction times in response to luminance increments and decrements under selective rod stimulation. Here we show that their rod reaction times are equated when plotted against the spatial luminance ratio between the stimulus and its background (L(max)/L(min), the larger and smaller of background and stimulus luminances). Similarly, reaction times to parafoveal S-cone selective increments and decrements from our previous studies [Murzac, A. (2004). A comparative study of the temporal characteristics of processing of S-cone incremental and decremental signals. PhD thesis, New Bulgarian University, Sofia, Murzac, A., & Vassilev, A. (2004). Reaction time to S-cone increments and decrements. In: 7th European conference on visual perception, Budapest, August 22-26. Perception, 33, 180 (Abstract).], are better described by the spatial luminance ratio than by Weber contrast. We assume that the type of stimulus detection by temporal (successive) luminance discrimination, by spatial (simultaneous) luminance discrimination or by both [Sperling, G., & Sondhi, M. M. (1968). Model for visual luminance discrimination and flicker detection. Journal of the Optical Society of America, 58, 1133-1145.] determines the appropriateness of one or other contrast metric for reaction time.

An Incremental Physically-Based Model of P91 Steel Flow Behaviour for the Numerical Analysis of Hot-Working Processes

Directory of Open Access Journals (Sweden)

Alberto Murillo-Marrodán

2018-04-01

Full Text Available This paper is aimed at modelling the flow behaviour of P91 steel at high temperature and a wide range of strain rates for constant and also variable strain-rate deformation conditions, such as those in real hot-working processes. For this purpose, an incremental physically-based model is proposed for the P91 steel flow behavior. This formulation considers the effects of dynamic recovery (DRV and dynamic recrystallization (DRX on the mechanical properties of the material, using only the flow stress, strain rate and temperature as state variables and not the accumulated strain. Therefore, it reproduces accurately the flow stress, work hardening and work softening not only under constant, but also under transient deformation conditions. To accomplish this study, the material is characterised experimentally by means of uniaxial compression tests, conducted at a temperature range of 900–1270 °C and at strain rates in the range of 0.005–10 s−1. Finally, the proposed model is implemented in commercial finite element (FE software to provide evidence of the performance of the proposed formulation. The experimental compression tests are simulated using the novel model and the well-known Hansel–Spittel formulation. In conclusion, the incremental physically-based model shows accurate results when work softening is present, especially under variable strain-rate deformation conditions. Hence, the present formulation is appropriate for the simulation of the hot-working processes typically conducted at industrial scale.

A power-driven increment borer for sampling high-density tropical wood

Czech Academy of Sciences Publication Activity Database

Krottenthaler, S.; Pitsch, P.; Helle, G.; Locosselli, G. M.; Ceccantini, G.; Altman, Jan; Svoboda, M.; Doležal, Jiří; Schleser, G.; Anhuf, D.

2015-01-01

Roč. 36, November (2015), s. 40-44 ISSN 1125-7865 R&D Projects: GA ČR GAP504/12/1952; GA ČR(CZ) GA14-12262S Institutional support: RVO:67985939 Keywords : tropical dendrochronology * tree sampling methods * increment cores Subject RIV: EF - Botanics Impact factor: 2.107, year: 2015

Incremental Validity of the Subscales of the Emotional Regulation Related to Testing Scale for Predicting Test Anxiety

Science.gov (United States)

Feldt, Ronald; Lindley, Kyla; Louison, Rebecca; Roe, Allison; Timm, Megan; Utinkova, Nikola

2015-01-01

The Emotional Regulation Related to Testing Scale (ERT Scale) assesses strategies students use to regulate emotion related to academic testing. It has four dimensions: Cognitive Appraising Processes (CAP), Emotion-Focusing Processes (EFP), Task-Focusing Processes (TFP), and Regaining Task-Focusing Processes (RTFP). The study examined the factor…

Variational formulation for dissipative continua and an incremental J-integral

Science.gov (United States)

Rahaman, Md. Masiur; Dhas, Bensingh; Roy, D.; Reddy, J. N.

2018-01-01

Our aim is to rationally formulate a proper variational principle for dissipative (viscoplastic) solids in the presence of inertia forces. As a first step, a consistent linearization of the governing nonlinear partial differential equations (PDEs) is carried out. An additional set of complementary (adjoint) equations is then formed to recover an underlying variational structure for the augmented system of linearized balance laws. This makes it possible to introduce an incremental Lagrangian such that the linearized PDEs, including the complementary equations, become the Euler-Lagrange equations. Continuous groups of symmetries of the linearized PDEs are computed and an analysis is undertaken to identify the variational groups of symmetries of the linearized dissipative system. Application of Noether's theorem leads to the conservation laws (conserved currents) of motion corresponding to the variational symmetries. As a specific outcome, we exploit translational symmetries of the functional in the material space and recover, via Noether's theorem, an incremental J-integral for viscoplastic solids in the presence of inertia forces. Numerical demonstrations are provided through a two-dimensional plane strain numerical simulation of a compact tension specimen of annealed mild steel under dynamic loading.

Applying CLSM to increment core surfaces for histometric analyses: A novel advance in quantitative wood anatomy

OpenAIRE

Wei Liang; Ingo Heinrich; Gerhard Helle; I. Dorado Liñán; T. Heinken

2013-01-01

A novel procedure has been developed to conduct cell structure measurements on increment core samples of conifers. The procedure combines readily available hardware and software equipment. The essential part of the procedure is the application of a confocal laser scanning microscope (CLSM) which captures images directly from increment cores surfaced with the advanced WSL core-microtome. Cell wall and lumen are displayed with a strong contrast due to the monochrome black and green nature of th...

Just-in-Time Technology to Encourage Incremental, Dietary Behavior Change

OpenAIRE

Intille, Stephen S.; Kukla, Charles; Farzanfar, Ramesh; Bakr, Waseem

2003-01-01

Our multi-disciplinary team is developing mobile computing software that uses “just-in-time” presentation of information to motivate behavior change. Using a participatory design process, preliminary interviews have helped us to establish 10 design goals. We have employed some to create a prototype of a tool that encourages better dietary decision making through incremental, just-in-time motivation at the point of purchase.

Just-in-Time Technology to Encourage Incremental, Dietary Behavior Change

Science.gov (United States)

Intille, Stephen S.; Kukla, Charles; Farzanfar, Ramesh; Bakr, Waseem

2003-01-01

Our multi-disciplinary team is developing mobile computing software that uses “just-in-time” presentation of information to motivate behavior change. Using a participatory design process, preliminary interviews have helped us to establish 10 design goals. We have employed some to create a prototype of a tool that encourages better dietary decision making through incremental, just-in-time motivation at the point of purchase. PMID:14728379

Incremental support vector machines for fast reliable image recognition

International Nuclear Information System (INIS)

Makili, L.; Vega, J.; Dormido-Canto, S.

2013-01-01

Highlights: ► A conformal predictor using SVM as the underlying algorithm was implemented. ► It was applied to image recognition in the TJ–II's Thomson Scattering Diagnostic. ► To improve time efficiency an approach to incremental SVM training has been used. ► Accuracy is similar to the one reached when standard SVM is used. ► Computational time saving is significant for large training sets. -- Abstract: This paper addresses the reliable classification of images in a 5-class problem. To this end, an automatic recognition system, based on conformal predictors and using Support Vector Machines (SVM) as the underlying algorithm has been developed and applied to the recognition of images in the Thomson Scattering Diagnostic of the TJ–II fusion device. Using such conformal predictor based classifier is a computationally intensive task since it implies to train several SVM models to classify a single example and to perform this training from scratch takes a significant amount of time. In order to improve the classification time efficiency, an approach to the incremental training of SVM has been used as the underlying algorithm. Experimental results show that the overall performance of the new classifier is high, comparable to the one corresponding to the use of standard SVM as the underlying algorithm and there is a significant improvement in time efficiency

Incremental support vector machines for fast reliable image recognition

Energy Technology Data Exchange (ETDEWEB)

Makili, L., E-mail: makili_le@yahoo.com [Instituto Superior Politécnico da Universidade Katyavala Bwila, Benguela (Angola); Vega, J. [Asociación EURATOM/CIEMAT para Fusión, Madrid (Spain); Dormido-Canto, S. [Dpto. Informática y Automática – UNED, Madrid (Spain)

2013-10-15

Highlights: ► A conformal predictor using SVM as the underlying algorithm was implemented. ► It was applied to image recognition in the TJ–II's Thomson Scattering Diagnostic. ► To improve time efficiency an approach to incremental SVM training has been used. ► Accuracy is similar to the one reached when standard SVM is used. ► Computational time saving is significant for large training sets. -- Abstract: This paper addresses the reliable classification of images in a 5-class problem. To this end, an automatic recognition system, based on conformal predictors and using Support Vector Machines (SVM) as the underlying algorithm has been developed and applied to the recognition of images in the Thomson Scattering Diagnostic of the TJ–II fusion device. Using such conformal predictor based classifier is a computationally intensive task since it implies to train several SVM models to classify a single example and to perform this training from scratch takes a significant amount of time. In order to improve the classification time efficiency, an approach to the incremental training of SVM has been used as the underlying algorithm. Experimental results show that the overall performance of the new classifier is high, comparable to the one corresponding to the use of standard SVM as the underlying algorithm and there is a significant improvement in time efficiency.

The island model for parallel implementation of evolutionary algorithm of Population-Based Incremental Learning (PBIL) optimization

International Nuclear Information System (INIS)

Lima, Alan M.M. de; Schirru, Roberto

2000-01-01

Genetic algorithms are biologically motivated adaptive systems which have been used, with good results, for function optimization. The purpose of this work is to introduce a new parallelization method to be applied to the Population-Based Incremental Learning (PBIL) algorithm. PBIL combines standard genetic algorithm mechanisms with simple competitive learning and has ben successfully used in combinatorial optimization problems. The development of this algorithm aims its application to the reload optimization of PWR nuclear reactors. Tests have been performed with combinatorial optimization problems similar to the reload problem. Results are compared to the serial PBIL ones, showing the new method's superiority and its viability as a tool for the nuclear core reload problem solution. (author)

Single Point Incremental Forming using a Dummy Sheet

DEFF Research Database (Denmark)

Skjødt, Martin; Silva, Beatriz; Bay, Niels

2007-01-01

A new version of single point incremental forming (SPIF) is presented. This version includes a dummy sheet on top of the work piece, thus forming two sheets instead of one. The dummy sheet, which is in contact with the rotating tool pin, is discarded after forming. The new set-up influences....... The possible influence of friction between the two sheets is furthermore investigated. The results show that the use of a dummy sheet reduces wear of the work piece to almost zero, but also causes a decrease in formability. Bulging of the planar sides of the pyramid is reduced and surface roughness...

Sensibilidade e especificidade dos sistemas de classificação para sobrepeso baseados no índice de massa corporal em crianças de 7-10 anos de idade.

Directory of Open Access Journals (Sweden)

Danielle Biazzi Leal

2013-03-01

Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2013v15n3p267   O objetivo deste estudo foi comparar a sensibilidade e especificidadede sistemas de classificação baseados no índice de massa corporal (IMC na detecção do excesso degordura corporal em escolares. Um total de 2795 escolares com idade entre sete a dez anos foram examinados. O excesso de gordura corporal foi definido como os resíduos padronizados do somatório de três dobras cutâneas iguais ou superiores ao percentil 90. Os sistemas internacionais baseados no IMC recomendados pela International Obesity Task Force (IOTF e Organização Mundial de Saúde (OMS-2007 foram avaliados com base emsua sensibilidade e especificidade para detecção do excesso de gordura corporal e comparado com uma referência do IMC nacional (Brasil-2006. Análise das razões de verossimilhança positiva (RV+ e negativa (RV- também foi utilizada para comparar as precisões diagnósticas dos três critérios do IMC. Os três sistemas de classificação apresentaram sensibilidade (78,4-98,6% e especificidade (75,9-91,6% moderadamente alta para ambos os sexos. No geral,os três sistemas de classificação apresentaram valores de RV+ e RV-, condizentes com umdiagnóstico de evidência moderada para o sobrepeso (RV+ acima de cinco e RV- abaixo de 0,2. Os resultados mostraram que os três sistemas de classificação do IMC podem ser usados como instrumentos de rastreio do excesso de gordura corporal. Entretanto, o desempenho do sistema de classificação Brasil-2006 foi superior porque mostrou o melhor equilíbrio entre os índices de acurácia diagnóstica.

Shape measurement system for single point incremental forming (SPIF) manufacts by using trinocular vision and random pattern

International Nuclear Information System (INIS)

Setti, Francesco; Bini, Ruggero; Lunardelli, Massimo; Bosetti, Paolo; Bruschi, Stefania; De Cecco, Mariolino

2012-01-01

Many contemporary works show the interest of the scientific community in measuring the shape of artefacts made by single point incremental forming. In this paper, we will present an algorithm able to detect feature points with a random pattern, check the compatibility of associations exploiting multi-stereo constraints and reject outliers and perform a 3D reconstruction by dense random patterns. The algorithm is suitable for a real-time application, in fact it needs just three images and a synchronous relatively fast processing. The proposed method has been tested on a simple geometry and results have been compared with a coordinate measurement machine acquisition. (paper)

Combining Compact Representation and Incremental Generation in Large Games with Sequential Strategies

DEFF Research Database (Denmark)

Bosansky, Branislav; Xin Jiang, Albert; Tambe, Milind

2015-01-01

representation of sequential strategies and linear programming, or by incremental strategy generation of iterative double-oracle methods. In this paper, we present novel hybrid of these two approaches: compact-strategy double-oracle (CS-DO) algorithm that combines the advantages of the compact representation...

Estudo sobre a implantação do orçamento baseado em desempenho na Autoridade Portuária de Valência

Directory of Open Access Journals (Sweden)

Rogério João Lunkes

2013-02-01

Full Text Available O crescimento e o desenvolvimento da economia mundial têm dependido cada vez mais do transporte marítimo, e os portos são um elo importante nesse processo. O presente estudo tem como objetivo explorar a aplicação do orçamento baseado em desempenho no sistema de portos da Espanha. Para tanto, foi realizado um estudo sobre o modelo orçamentário do Sistema Portuário de Titularidade Estatal e um estudo de caso na Autoridade Portuária de Valência. Os resultados mostram que as mudanças no orçamento geraram maior integração entre as medidas de desempenho e as dotações orçamentárias, as quais são feitas com detalhamento do processo no nível operacional, o que inclui os projetos de investimento. Em nível de controle, o modelo permitiu melhorar a avaliação dos resultados por incluir outras medidas de desempenho, além de receitas e custos, que podem ser comparados com outros portos do país e do exterior.

From incremental to fundamental substitution in chemical alternatives assessment

DEFF Research Database (Denmark)

Fantke, Peter; Weber, Roland; Scheringer, Martin

2015-01-01

to similarity in chemical structures and, hence, similar hazard profiles between phase-out and substitute chemicals, leading to a rather incremental than fundamental substitution. A hampered phase-out process, the lack of implementing Green Chemistry principles in chemicals design, and lack of Sustainable...... an integrated approach of all stakeholders involved toward more fundamental and function-based substitution by greener and more sustainable alternatives. Our recommendations finally constitute a starting point for identifying further research needs and for improving current alternatives assessment practice....

Diagnosis of small hepatocellular carcinoma by incremental dynamic CT

International Nuclear Information System (INIS)

Uchida, Masafumi; Kumabe, Tsutomu; Edamitsu, Osamu

1993-01-01

Thirty cases of pathologically confirmed small hepatocellular carcinoma were examined by Incremental Dynamic CT (ICT). ICT scanned the whole liver with single-breath-hold technique; therefore, effective early contrast enhancement could be obtained for diagnosis. Among the 30 tumors, 26 were detected. The detection rate was 87%. A high detection rate was obtained in tumors more than 20 mm in diameter. Twenty-two of 26 tumors could be diagnosed correctly. ICT examination was useful for detection of small hepatocellular carcinoma. (author)

Observers for a class of systems with nonlinearities satisfying an incremental quadratic inequality

Science.gov (United States)

Acikmese, Ahmet Behcet; Martin, Corless

2004-01-01

We consider the problem of state estimation from nonlinear time-varying system whose nonlinearities satisfy an incremental quadratic inequality. Observers are presented which guarantee that the state estimation error exponentially converges to zero.

Validez, fiabilidad y reproducibilidad de un test incremental en rampa en personas físicamente activas. Validity and reliability of an incremental ramp test for active persons.

Directory of Open Access Journals (Sweden)

Benito Peinado, Pedro José

2005-10-01

Full Text Available ResumenLa novedosa aparición de equipos de análisis de gases más sofisticados y precisos, obliga a los investigadores, como paso inicial de cualquier estudio más complejo, a la calibración y contraste de sus herramientas de medida. En el momento de comenzar este estudio los datos publicados prueban sin lugar a dudas la validez del equipo de análisis de gases Oxicon Pro ® (Carter y col., 1999:49, Rietjens y col., 2001, Koskolou y Geladas, 2002, pero no ha sido probada la reproducibilidad de las pruebas con este equipo y el protocolo que aquí proponemos. Con este fin se realizaron pruebas test-retest a un grupo de sujetos físicamente activos (Estudiantes de Educación Física el INEF de Madrid. Se estudiaron 10 sujetos físicamente activos, (características en tabla I a los que se realizó dos pruebas de esfuerzo en cicloergómetro. El protocolo en rampa, aumentaba 5 vatios cada 12 segundos (25 vatios·min- 1 con un calentamiento de 3 minutos se aplicaba hasta que se cumplió, al menos dos de los criterios habituales para el cese de la prueba. Los resultados (tablas IV a VIII nos indican la alta correlación entre las variables en las dos pruebas realizadasoscilando entre r = 0,60 y r = 0,99 y coeficiente de determinación para el VO2, VCO2 y la Carga que fueron de r2 = 0,95 0,94 y 0,97 respectivamente. Solo en dos variables se encontraron diferencias significativas entre la prueba 1 y 2. Esto fue en la producción máxima de VCO2 y en el umbral aeróbico expresado en frecuencia cardiaca. Estas diferencias pueden ser debidas a la mayor carga desarrollada en la 2ª prueba, aunque estas no sean significativas. No se encontraron correlaciones entre variables de rendimiento como VO2 máx. , VO2/kg; W y W/kg y las variables de recuperación. En conclusión, las variables estudiadas nos ofrecen bastante fiabilidad sobre el protocolo y equipo utilizados en nuestro estudio. Con esto queda probada la fiabilidad y reproducibilidad del test, la

Stable Myoelectric Control of a Hand Prosthesis using Non-Linear Incremental Learning

Directory of Open Access Journals (Sweden)

Arjan eGijsberts

2014-02-01

Full Text Available Stable myoelectric control of hand prostheses remains an open problem. The only successful human-machine interface is surface electromyography, typically allowing control of a few degrees of freedom. Machine learning techniques may have the potential to remove these limitations, but their performance is thus far inadequate: myoelectric signals change over time under the influence of various factors, deteriorating control performance. It is therefore necessary, in the standard approach, to regularly retrain a new model from scratch.We hereby propose a non-linear incremental learning method in which occasional updates with a modest amount of novel training data allow continual adaptation to the changes in the signals. In particular, Incremental Ridge Regression and an approximation of the Gaussian Kernel known as Random Fourier Features are combined to predict finger forces from myoelectric signals, both finger-by-finger and grouped in grasping patterns.We show that the approach is effective and practically applicable to this problem by first analyzing its performance while predicting single-finger forces. Surface electromyography and finger forces were collected from 10 intact subjects during four sessions spread over two different days; the results of the analysis show that small incremental updates are indeed effective to maintain a stable level of performance.Subsequently, we employed the same method on-line to teleoperate a humanoid robotic arm equipped with a state-of-the-art commercial prosthetic hand. The subject could reliably grasp, carry and release everyday-life objects, enforcing stable grasping irrespective of the signal changes, hand/arm movements and wrist pronation and supination.

An Incremental Classification Algorithm for Mining Data with Feature Space Heterogeneity

Directory of Open Access Journals (Sweden)

Yu Wang

2014-01-01

Full Text Available Feature space heterogeneity often exists in many real world data sets so that some features are of different importance for classification over different subsets. Moreover, the pattern of feature space heterogeneity might dynamically change over time as more and more data are accumulated. In this paper, we develop an incremental classification algorithm, Supervised Clustering for Classification with Feature Space Heterogeneity (SCCFSH, to address this problem. In our approach, supervised clustering is implemented to obtain a number of clusters such that samples in each cluster are from the same class. After the removal of outliers, relevance of features in each cluster is calculated based on their variations in this cluster. The feature relevance is incorporated into distance calculation for classification. The main advantage of SCCFSH lies in the fact that it is capable of solving a classification problem with feature space heterogeneity in an incremental way, which is favorable for online classification tasks with continuously changing data. Experimental results on a series of data sets and application to a database marketing problem show the efficiency and effectiveness of the proposed approach.

Incremental Validity of the DSM-5 Section III Personality Disorder Traits With Respect to Psychosocial Impairment.

Science.gov (United States)

Simms, Leonard J; Calabrese, William R

2016-02-01

Traditional personality disorders (PDs) are associated with significant psychosocial impairment. DSM-5 Section III includes an alternative hybrid personality disorder (PD) classification approach, with both type and trait elements, but relatively little is known about the impairments associated with Section III traits. Our objective was to study the incremental validity of Section III traits--compared to normal-range traits, traditional PD criterion counts, and common psychiatric symptomatology--in predicting psychosocial impairment. To that end, 628 current/recent psychiatric patients completed measures of PD traits, normal-range traits, traditional PD criteria, psychiatric symptomatology, and psychosocial impairments. Hierarchical regressions revealed that Section III PD traits incrementally predicted psychosocial impairment over normal-range personality traits, PD criterion counts, and common psychiatric symptomatology. In contrast, the incremental effects for normal-range traits, PD symptom counts, and common psychiatric symptomatology were substantially smaller than for PD traits. These findings have implications for PD classification and the impairment literature more generally.

Desarrollo de una marcaproducto para Gesta Diseño. Un caso de innovación incremental

Directory of Open Access Journals (Sweden)

ANDRÉS JULIÁN HURTADO RUIZ

2012-01-01

Full Text Available Este caso tiene el objetivo de guiar al lector en el proceso de innovación incremental de un producto. La guía hacia la innovación comienza con la revisión de tendencias de diseño y finaliza con la elaboración de un brief de diseño. El caso toma el ejemplo de la empresa Gesta Diseño® como medio para guiar un proceso de innovación que permita a la empresa apoyar la representación de su marca. En el marco de la innovación incremental, Gesta Diseño® supone una innovación pequeña pero constante que, apoyada en su imagen de marca, permita a la empresa obtener una ventaja competitiva en el mercado. La principal recomendación del caso es usar la estrategia de innovación incremental como herramienta para el fortalecimiento de marca de una pequeña empresa.

Cross-correlation of instantaneous phase increments in pressure-flow fluctuations: Applications to cerebral autoregulation

Science.gov (United States)

Chen, Zhi; Hu, Kun; Stanley, H. Eugene; Novak, Vera; Ivanov, Plamen Ch.

2006-03-01

We investigate the relationship between the blood flow velocities (BFV) in the middle cerebral arteries and beat-to-beat blood pressure (BP) recorded from a finger in healthy and post-stroke subjects during the quasisteady state after perturbation for four different physiologic conditions: supine rest, head-up tilt, hyperventilation, and CO2 rebreathing in upright position. To evaluate whether instantaneous BP changes in the steady state are coupled with instantaneous changes in the BFV, we compare dynamical patterns in the instantaneous phases of these signals, obtained from the Hilbert transform, as a function of time. We find that in post-stroke subjects the instantaneous phase increments of BP and BFV exhibit well-pronounced patterns that remain stable in time for all four physiologic conditions, while in healthy subjects these patterns are different, less pronounced, and more variable. We propose an approach based on the cross-correlation of the instantaneous phase increments to quantify the coupling between BP and BFV signals. We find that the maximum correlation strength is different for the two groups and for the different conditions. For healthy subjects the amplitude of the cross-correlation between the instantaneous phase increments of BP and BFV is small and attenuates within 3-5 heartbeats. In contrast, for post-stroke subjects, this amplitude is significantly larger and cross-correlations persist up to 20 heartbeats. Further, we show that the instantaneous phase increments of BP and BFV are cross-correlated even within a single heartbeat cycle. We compare the results of our approach with three complementary methods: direct BP-BFV cross-correlation, transfer function analysis, and phase synchronization analysis. Our findings provide insight into the mechanism of cerebral vascular control in healthy subjects, suggesting that this control mechanism may involve rapid adjustments (within a heartbeat) of the cerebral vessels, so that BFV remains steady in

MANEJO DO CRESCIMENTO DIAMÉTRICO DE Araucaria angustifolia (Bert. O. Ktze. BASEADO NA ÁRVORE INDIVIDUAL

Directory of Open Access Journals (Sweden)

Leif Nutto

2001-04-01

Full Text Available Neste trabalho, foi analisado o potencial do crescimento diamétrico de Araucaria angustifolia (Bert. O. Ktze. em diferentes sítios, com o objetivo de obter informações para o manejo dessa espécie em florestas heterogêneas inequiâneas, visando à produção de madeira de alta qualidade em árvores pré-selecionadas. O material usado constitui-se de 400 árvores de florestas nativas e plantios, crescendo sob condições e tratamentos variáveis nos estados de Santa Catarina, Paraná e Rio Grande do Sul. O método usado para investigar a relação entre a largura da copa e o dap foi baseado na projeção horizontal da copa da árvore individual. Usando 16 amostras de 25 árvores, foram estudados vários estágios de desenvolvimento. Para cada amostra, foi feito um mapa de distribuição das árvores e das projeções das copas para avaliar o efeito da competição. O estudo mostra que existe uma estreita relação entre a largura da copa e o dap, que pode ser usada para o desenvolvimento de novas ferramentas de decisão aplicáveis em árvores individuais para o manejo de araucária em florestas heterogêneas inequiâneas ou para a produção de madeira de alta qualidade com árvores pré-selecionadas. Também, mostrou-se uma estreita correlação entre o crescimento de diâmetro e a qualidade do sítio, pois a expansão máxima da copa depende da qualidade deste, indicando que ele deve ser considerado como fator limitante para o manejo do crescimento.

Molar cusp deformation evaluated by micro-CT and enamel crack formation to compare incremental and bulk-filling techniques.

Science.gov (United States)

Oliveira, Laís Rani Sales; Braga, Stella Sueli Lourenço; Bicalho, Aline Arêdes; Ribeiro, Maria Tereza Hordones; Price, Richard Bengt; Soares, Carlos José

2018-07-01

To describe a method of measuring the molar cusp deformation using micro-computed tomography (micro-CT), the propagation of enamel cracks using transillumination, and the effects of hygroscopic expansion after incremental and bulk-filling resin composite restorations. Twenty human molars received standardized Class II mesio-occlusal-distal cavity preparations. They were restored with either a bulk-fill resin composite, X-tra fil (XTRA), or a conventional resin composite, Filtek Z100 (Z100). The resin composites were tested for post-gel shrinkage using a strain gauge method. Cusp deformation (CD) was evaluated using the images obtained using a micro-CT protocol and using a strain-gauge method. Enamel cracks were detected using transillumination. The post-gel shrinkage of Z100 was higher than XTRA (P cracks than XTRA (P = 0.012). Micro-CT was an effective method for evaluating the cusp deformation. Transillumination was effective for detecting enamel cracks. There were fewer negative effects of polymerization shrinkage in bulk-fill resin restorations using XTRA than for the conventional incremental filling technique using conventional composite resin Z100. Shrinkage and cusp deformation are directly related to the formation of enamel cracks. Cusp deformation and crack propagation may increase the risk of tooth fracture. Copyright © 2018 Elsevier Ltd. All rights reserved.

Sufficient conditions for a period incrementing big bang bifurcation in one-dimensional maps

International Nuclear Information System (INIS)

Avrutin, V; Granados, A; Schanz, M

2011-01-01

Typically, big bang bifurcation occurs for one (or higher)-dimensional piecewise-defined discontinuous systems whenever two border collision bifurcation curves collide transversely in the parameter space. At that point, two (feasible) fixed points collide with one boundary in state space and become virtual, and, in the one-dimensional case, the map becomes continuous. Depending on the properties of the map near the codimension-two bifurcation point, there exist different scenarios regarding how the infinite number of periodic orbits are born, mainly the so-called period adding and period incrementing. In our work we prove that, in order to undergo a big bang bifurcation of the period incrementing type, it is sufficient for a piecewise-defined one-dimensional map that the colliding fixed points are attractive and with associated eigenvalues of different signs

Sufficient conditions for a period incrementing big bang bifurcation in one-dimensional maps

Science.gov (United States)

Avrutin, V.; Granados, A.; Schanz, M.

2011-09-01

Typically, big bang bifurcation occurs for one (or higher)-dimensional piecewise-defined discontinuous systems whenever two border collision bifurcation curves collide transversely in the parameter space. At that point, two (feasible) fixed points collide with one boundary in state space and become virtual, and, in the one-dimensional case, the map becomes continuous. Depending on the properties of the map near the codimension-two bifurcation point, there exist different scenarios regarding how the infinite number of periodic orbits are born, mainly the so-called period adding and period incrementing. In our work we prove that, in order to undergo a big bang bifurcation of the period incrementing type, it is sufficient for a piecewise-defined one-dimensional map that the colliding fixed points are attractive and with associated eigenvalues of different signs.

Incremental electrohydraulic forming - A new approach for the manufacture of structured multifunctional sheet metal blanks

Science.gov (United States)

Djakow, Eugen; Springer, Robert; Homberg, Werner; Piper, Mark; Tran, Julian; Zibart, Alexander; Kenig, Eugeny

2017-10-01

Electrohydraulic Forming (EHF) processes permit the production of complex, sharp-edged geometries even when high-strength materials are used. Unfortunately, the forming zone is often limited as compared to other sheet metal forming processes. The use of a special industrial-robot-based tool setup and an incremental process strategy could provide a promising solution for this problem. This paper describes such an innovative approach using an electrohydraulic incremental forming machine, which can be employed to manufacture the large multifunctional and complex part geometries in steel, aluminium, magnesium and reinforced plastic that are employed in lightweight constructions or heating elements.

The impact of weather conditions on dynamics of Hylocomium splendens annual increment and net production in forest communities of forest-steppe zone in Khakassia

Directory of Open Access Journals (Sweden)

I. A. Goncharova

2015-12-01

Full Text Available Dynamics of annual increments of green moss Hylocomium splendens (Hedw. Schimp. in B.S.G. in the Khakassia forest-steppe zone has been studied. The values of the moss linear and phytomass increments were investigated in different habitats for 6 years. The aboveground annual production of the H. splendens in phytocenosis was estimated. Linear increments of the H. splendens growing under the tree canopy and opening between trees were not significantly different. Phytomass increments under the tree canopy are significantly higher than in the openings between trees. The density of moss mats, proportion between leaves and stems were calculated. It was revealed that climatic factors have a different degree and duration influence on the moss increments in different habitats. Linear increments of H. splendens in different habitats synchronously respond to weather factor changes. The air temperature was the most important at the beginning and the end of the vegetation period; the amount of precipitation was more important in the middle of the growth period. Phytomass increments of H. splendens in different habitats respond differently to influence of weather conditions. Phytomass increments under the tree canopy are not sensitive to air temperature, and more sensitive to precipitations in the middle of growth period than one of opening between trees. The specificity of the climatic factors’ influence on the biomass growth depends on habitat conditions.

A Batch-Incremental Video Background Estimation Model using Weighted Low-Rank Approximation of Matrices

KAUST Repository

Dutta, Aritra

2017-07-02

Principal component pursuit (PCP) is a state-of-the-art approach for background estimation problems. Due to their higher computational cost, PCP algorithms, such as robust principal component analysis (RPCA) and its variants, are not feasible in processing high definition videos. To avoid the curse of dimensionality in those algorithms, several methods have been proposed to solve the background estimation problem in an incremental manner. We propose a batch-incremental background estimation model using a special weighted low-rank approximation of matrices. Through experiments with real and synthetic video sequences, we demonstrate that our method is superior to the state-of-the-art background estimation algorithms such as GRASTA, ReProCS, incPCP, and GFL.

A Batch-Incremental Video Background Estimation Model using Weighted Low-Rank Approximation of Matrices

KAUST Repository

Dutta, Aritra; Li, Xin; Richtarik, Peter

2017-01-01

Principal component pursuit (PCP) is a state-of-the-art approach for background estimation problems. Due to their higher computational cost, PCP algorithms, such as robust principal component analysis (RPCA) and its variants, are not feasible in processing high definition videos. To avoid the curse of dimensionality in those algorithms, several methods have been proposed to solve the background estimation problem in an incremental manner. We propose a batch-incremental background estimation model using a special weighted low-rank approximation of matrices. Through experiments with real and synthetic video sequences, we demonstrate that our method is superior to the state-of-the-art background estimation algorithms such as GRASTA, ReProCS, incPCP, and GFL.

Distance-independent individual tree diameter-increment model for Thuya [Tetraclinis articulata (VAHL.) MAST.] stands in Tunisia

OpenAIRE

T. Sghaier; M. Tome; J. Tome; M. Sanchez-Gonzalez; I. Cañellas; R. Calama

2013-01-01

Aim of study: The aim of the work was to develop an individual tree diameter-increment model for Thuya (Tetraclinis articulata) in Tunisia.Area of study: The natural Tetraclinis articulata stands at Jbel Lattrech in north-eastern of Tunisia.Material and methods:  Data came from 200 trees located in 50 sample plots. The diameter at age t and the diameter increment for the last five years obtained from cores taken at breast height were measured for each tree. Four difference equations derived f...

The limit distribution of the maximum increment of a random walk with dependent regularly varying jump sizes

DEFF Research Database (Denmark)

Mikosch, Thomas Valentin; Moser, Martin

2013-01-01

We investigate the maximum increment of a random walk with heavy-tailed jump size distribution. Here heavy-tailedness is understood as regular variation of the finite-dimensional distributions. The jump sizes constitute a strictly stationary sequence. Using a continuous mapping argument acting...... on the point processes of the normalized jump sizes, we prove that the maximum increment of the random walk converges in distribution to a Fréchet distributed random variable....

An application of the J-integral to an incremental analysis of blunting crack behavior

International Nuclear Information System (INIS)

Merkle, J.G.

1989-01-01

This paper describes an analytical approach to estimating the elastic-plastic stresses and strains near the tip of a blunting crack with a finite root radius. Rice's original derivation of the path independent J-integral considered the possibility of a finite crack tip root radius. For this problem Creager's elastic analysis gives the relation between the stress intensity factor K I and the near tip stresses. It can be shown that the relation K I 2 = E'J holds when the root radius is finite. Recognizing that elastic-plastic behavior is incrementally linear then allows a derivation to be performed for a bielastic specimen having a crack tip region of reduced modulus, and the result differentiated to estimate elastic-plastic behavior. The result is the incremental form of Neuber's equation. This result does not require the assumption of any particular stress-strain relation. However by assuming a pure power law stress-strain relation and using Ilyushin's principle, the ordinary deformation theory form of Neuber's equation, K σ K var epsilon = K t 2 , is obtained. Applications of the incremental form of Neuber's equation have already been made to fatigue and fracture analysis. This paper helps to provide a theoretical basis for these methods previously considered semiempirical. 26 refs., 4 figs

Exploiting Outage and Error Probability of Cooperative Incremental Relaying in Underwater Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Hina Nasir

2016-07-01

Full Text Available This paper embeds a bi-fold contribution for Underwater Wireless Sensor Networks (UWSNs; performance analysis of incremental relaying in terms of outage and error probability, and based on the analysis proposition of two new cooperative routing protocols. Subject to the first contribution, a three step procedure is carried out; a system model is presented, the number of available relays are determined, and based on cooperative incremental retransmission methodology, closed-form expressions for outage and error probability are derived. Subject to the second contribution, Adaptive Cooperation in Energy (ACE efficient depth based routing and Enhanced-ACE (E-ACE are presented. In the proposed model, feedback mechanism indicates success or failure of data transmission. If direct transmission is successful, there is no need for relaying by cooperative relay nodes. In case of failure, all the available relays retransmit the data one by one till the desired signal quality is achieved at destination. Simulation results show that the ACE and E-ACE significantly improves network performance, i.e., throughput, when compared with other incremental relaying protocols like Cooperative Automatic Repeat reQuest (CARQ. E-ACE and ACE achieve 69% and 63% more throughput respectively as compared to CARQ in hard underwater environment.

Performance Analysis of Selective Decode-and-Forward Multinode Incremental Relaying with Maximal Ratio Combining

KAUST Repository

Hadjtaieb, Amir

2013-09-12

In this paper, we propose an incremental multinode relaying protocol with arbitrary N-relay nodes that allows an efficient use of the channel spectrum. The destination combines the received signals from the source and the relays using maximal ratio Combining (MRC). The transmission ends successfully once the accumulated signal-to-noise ratio (SNR) exceeds a predefined threshold. The number of relays participating in the transmission is adapted to the channel conditions based on the feedback from the destination. The use of incremental relaying allows obtaining a higher spectral efficiency. Moreover, the symbol error probability (SEP) performance is enhanced by using MRC at the relays. The use of MRC at the relays implies that each relay overhears the signals from the source and all previous relays and combines them using MRC. The proposed protocol differs from most of existing relaying protocol by the fact that it combines both incremental relaying and MRC at the relays for a multinode topology. Our analyses for a decode-and-forward mode show that: (i) compared to existing multinode relaying schemes, the proposed scheme can essentially achieve the same SEP performance but with less average number of time slots, (ii) compared to schemes without MRC at the relays, the proposed scheme can approximately achieve a 3 dB gain.

Individualized 6-mercaptopurine increments in consolidation treatment of childhood acute lymphoblastic leukemia

DEFF Research Database (Denmark)

Tulstrup, Morten; Frandsen, Thomas L; Abrahamsson, Jonas

2018-01-01

increments of additional 25 mg/m2 /day beginning on days 50 and/or 71 unless dose-limiting myelosuppression had occurred. RESULTS: In the experimental arm, 166 patients (42%) received one dose increment, and 62 (16%) received two. Fifty-seven of 387 (15%) patients in the experimental arm were MRD positive...... minimal residual disease (MRD) positivity and event-free survival. METHODS: 392 patients were randomized to experimental and 396 to standard therapy. Patients allocated to standard therapy received oral 6-mercaptopurine (25 mg/m2 /day) from days 30 to 85, while the experimental arm received stepwise...... at end of consolidation vs 77 of 389 (20%) in the control arm (P = .08). Five-year probability of event-free survival was 0.89 (95% CI: 0.85-0.93) in the experimental arm vs 0.93 (0.90-0.96) in the control arm (P = .13). The median accumulated length of 6-mercaptopurine treatment interruptions was 7 (IQR...

Observers for Systems with Nonlinearities Satisfying an Incremental Quadratic Inequality

Science.gov (United States)

Acikmese, Ahmet Behcet; Corless, Martin

2004-01-01

We consider the problem of state estimation for nonlinear time-varying systems whose nonlinearities satisfy an incremental quadratic inequality. These observer results unifies earlier results in the literature; and extend it to some additional classes of nonlinearities. Observers are presented which guarantee that the state estimation error exponentially converges to zero. Observer design involves solving linear matrix inequalities for the observer gain matrices. Results are illustrated by application to a simple model of an underwater.

SERUM IGF-I AND HORMONAL RESPONSES TO INCREMENTAL EXERCISE IN ATHLETES WITH AND WITHOUT LEFT VENTRICULAR HYPERTROPHY

Directory of Open Access Journals (Sweden)

Aleksandra Zebrowska

2009-03-01

Full Text Available We investigated the response of insulin-like growth factor (IGF- I, insulin-like growth factor binding protein-3 (IGFBP-3 and some hormones, i.e., testosterone (T, growth hormone (GH, cortisol (C, and insulin (I, to maximal exercise in road cyclists with and without diagnosed left ventricular hypertrophy. M-mode and two-dimensional Doppler echocardiography was performed in 30 professional male endurance athletes and a group of 14 healthy untrained subjects using a Hewlett-Packard Image Point HX ultrasound system with standard imaging transducers. Echocardiography and an incremental physical exercise test were performed during the competitive season. Venous blood samples were drawn before and immediately after the maximal cycling exercise test for determination of somatomedin and hormonal concentrations. The basal concentration of IGF-I was statistically higher (p < 0.05 in athletes with left ventricular muscle hypertrophy (LVH when compared to athletes with a normal upper limit of the left ventricular wall (LVN (p < 0.05 and to the control group (CG (p < 0.01. The IGF-I level increased significantly at maximal intensity of incremental exercise in CG (p < 0.01, LVN (p < 0.05 and LVH (p < 0.05 compared to respective values at rest. Long-term endurance training induced an increase in resting (p < 0.01 and post-exercise (p < 0.05 IGF-I/IGFBP-3 ratio in athletes with LVH compared to LVN. The testosterone (T level was lower in LVH at rest compared to LVN and CG groups (p < 0.05. These results indicate that resting serum IGF-I concentration were higher in trained subjects with LVH compared to athletes without LVH. Serum IGF- I/IGFBP-3 elevation at rest and after exercise might suggest that IGF-I act as a potent stimulant of left ventricular hypertrophy in chronically trained endurance athletes

Top-down attention based on object representation and incremental memory for knowledge building and inference.

Science.gov (United States)

Kim, Bumhwi; Ban, Sang-Woo; Lee, Minho

2013-10-01

Humans can efficiently perceive arbitrary visual objects based on an incremental learning mechanism with selective attention. This paper proposes a new task specific top-down attention model to locate a target object based on its form and color representation along with a bottom-up saliency based on relativity of primitive visual features and some memory modules. In the proposed model top-down bias signals corresponding to the target form and color features are generated, which draw the preferential attention to the desired object by the proposed selective attention model in concomitance with the bottom-up saliency process. The object form and color representation and memory modules have an incremental learning mechanism together with a proper object feature representation scheme. The proposed model includes a Growing Fuzzy Topology Adaptive Resonance Theory (GFTART) network which plays two important roles in object color and form biased attention; one is to incrementally learn and memorize color and form features of various objects, and the other is to generate a top-down bias signal to localize a target object by focusing on the candidate local areas. Moreover, the GFTART network can be utilized for knowledge inference which enables the perception of new unknown objects on the basis of the object form and color features stored in the memory during training. Experimental results show that the proposed model is successful in focusing on the specified target objects, in addition to the incremental representation and memorization of various objects in natural scenes. In addition, the proposed model properly infers new unknown objects based on the form and color features of previously trained objects. Copyright © 2013 Elsevier Ltd. All rights reserved.

Incremental Value of Pocket-Sized Echocardiography in Addition to Physical Examination during Inpatient Cardiology Evaluation: A Multicenter Italian Study (SIEC).

Science.gov (United States)

Di Bello, Vitantonio; La Carrubba, Salvatore; Conte, Lorenzo; Fabiani, Iacopo; Posteraro, Alfredo; Antonini-Canterin, Francesco; Barletta, Valentina; Nicastro, Irene; Mariotti, Egidio; Severino, Sergio; Caso, Pio; Benedetto, Frank; Savino, Ketty; Carerj, Scipione

2015-10-01

We prospectively assessed the incremental value of a pocket-sized echocardiography (PSE) device during cardiology consultations, in addition to physical examination, ECG reading, and chest x-ray. A total of 443 consecutive patients (53% men), referred for bedside consultations, underwent physical examination, ECG, and CXR, followed by PSE examination. The physician completed a detailed questionnaire (clinical and echocardiographic data, scanning time, abnormal results). Receiver operating characteristic (ROC) curve analysis was generated to test the predictive discrimination value of the different methods. The incremental value of PSE examination compared to clinical visit alone or combined with ECG results was expressed as a global chi-square value. The PSE examination did not influence the definitive diagnosis in only 23.5% of cases, while 25.3% of the diagnoses were confirmed and verified by PSE. The clinical diagnosis was enriched by PSE in 21.9% of cases, and the diagnosis was changed in 26.2%. The area under curve (AUC) of physical examination + ECG results (sensitivity: 80%; specificity: 67%) was significantly higher than physical examination alone (sensitivity: 75%; specificity: 62%) (P echocardiography. © 2015, Wiley Periodicals, Inc.

Single Point Incremental Forming to increase material knowledge and production flexibility

Science.gov (United States)

Habraken, A. M.

2016-08-01

Nowadays, manufactured pieces can be divided into two groups: mass production and production of low volume number of parts. Within the second group (prototyping or small batch production), an emerging solution relies on Incremental Sheet Forming or ISF. ISF refers to processes where the plastic deformation occurs by repeated contact with a relatively small tool. More specifically, many publications over the past decade investigate Single Point Incremental Forming (SPIF) where the final shape is determined only by the tool movement. This manufacturing process is characterized by the forming of sheets by means of a CNC controlled generic tool stylus, with the sheets clamped by means of a non-workpiece-specific clamping system and in absence of a partial or a full die. The advantage is no tooling requirements and often enhanced formability, however it poses a challenge in term of process control and accuracy assurance. Note that the most commonly used materials in incremental forming are aluminum and steel alloys however other alloys are also used especially for medical industry applications, such as cobalt and chromium alloys, stainless steel and titanium alloys. Some scientists have applied incremental forming on PVC plates and other on sandwich panels composed of propylene with mild steel and aluminum metallic foams with aluminum sheet metal. Micro incremental forming of thin foils has also been developed. Starting from the scattering of the results of Finite Element (FE) simulations, when one tries to predict the tool force (see SPIF benchmark of 2014 Numisheet conference), we will see how SPIF and even micro SPIF (process applied on thin metallic sheet with a few grains within the thickness) allow investigating the material behavior. This lecture will focus on the identification of constitutive laws, on the SPIF forming mechanisms and formability as well as the failure mechanism. Different hypotheses have been proposed to explain SPIF formability, they will be

Single Point Incremental Forming to increase material knowledge and production flexibility

International Nuclear Information System (INIS)

Habraken, A.M.

2016-01-01

Nowadays, manufactured pieces can be divided into two groups: mass production and production of low volume number of parts. Within the second group (prototyping or small batch production), an emerging solution relies on Incremental Sheet Forming or ISF. ISF refers to processes where the plastic deformation occurs by repeated contact with a relatively small tool. More specifically, many publications over the past decade investigate Single Point Incremental Forming (SPIF) where the final shape is determined only by the tool movement. This manufacturing process is characterized by the forming of sheets by means of a CNC controlled generic tool stylus, with the sheets clamped by means of a non-workpiece-specific clamping system and in absence of a partial or a full die. The advantage is no tooling requirements and often enhanced formability, however it poses a challenge in term of process control and accuracy assurance. Note that the most commonly used materials in incremental forming are aluminum and steel alloys however other alloys are also used especially for medical industry applications, such as cobalt and chromium alloys, stainless steel and titanium alloys. Some scientists have applied incremental forming on PVC plates and other on sandwich panels composed of propylene with mild steel and aluminum metallic foams with aluminum sheet metal. Micro incremental forming of thin foils has also been developed. Starting from the scattering of the results of Finite Element (FE) simulations, when one tries to predict the tool force (see SPIF benchmark of 2014 Numisheet conference), we will see how SPIF and even micro SPIF (process applied on thin metallic sheet with a few grains within the thickness) allow investigating the material behavior. This lecture will focus on the identification of constitutive laws, on the SPIF forming mechanisms and formability as well as the failure mechanism. Different hypotheses have been proposed to explain SPIF formability, they will be

An Approach to Incremental Design of Distributed Embedded Systems

DEFF Research Database (Denmark)

Pop, Paul; Eles, Petru; Pop, Traian

2001-01-01

In this paper we present an approach to incremental design of distributed embedded systems for hard real-time applications. We start from an already existing system running a set of applications and the design problem is to implement new functionality on this system. Thus, we propose mapping...... strategies of functionality so that the already running functionality is not disturbed and there is a good chance that, later, new functionality can easily be mapped on the resulted system. The mapping and scheduling for hard real-time embedded systems are considered the context of a realistic communication...

Failure mechanisms in single-point incremental forming of metals

DEFF Research Database (Denmark)

Silva, Maria B.; Nielsen, Peter Søe; Bay, Niels

2011-01-01

The last years saw the development of two different views on how failure develops in single-point incremental forming (SPIF). Today, researchers are split between those claiming that fracture is always preceded by necking and those considering that fracture occurs with suppression of necking. Each...... on formability limits and development of fracture. The unified view conciliates the aforementioned different explanations on the role of necking in fracture and is consistent with the experimental observations that have been reported in the past years. The work is performed on aluminium AA1050-H111 sheets...

Defense Enterprise Accounting and Management System-Increment 1 (DEAMS Inc 1)

Science.gov (United States)

2016-03-01

information accurately and in conformance with Generally Accepted Accounting Principles , to comply with Congressional requirements of the Chief Financial ...2016 Major Automated Information System Annual Report Defense Enterprise Accounting and Management System-Increment 1 (DEAMS Inc 1) Defense...Phone: 937-257-2714 Fax: DSN Phone: 787-2714 DSN Fax: Date Assigned: August 17, 2015 Program Information Program Name Defense Enterprise Accounting

Lead 210 and moss-increment dating of two Finnish Sphagnum hummocks

International Nuclear Information System (INIS)

El-Daoushy, F.

1982-01-01

A comparison is presented of 210 Pb dating data with mass-increment dates of selected peat material from Finland. The measurements of 210 Pb were carried out by determining the granddaughter product 210 Po by means of the isotope dilution. The ages in 210 Pb yr were calculated using the constant initial concentration and the constant rate of supply models. (U.K.)

Modeling Student Software Testing Processes: Attitudes, Behaviors, Interventions, and Their Effects

Science.gov (United States)

Buffardi, Kevin John

2014-01-01

Effective software testing identifies potential bugs and helps correct them, producing more reliable and maintainable software. As software development processes have evolved, incremental testing techniques have grown in popularity, particularly with introduction of test-driven development (TDD). However, many programmers struggle to adopt TDD's…

Raising Cervical Cancer Awareness: Analysing the Incremental Efficacy of Short Message Service

Science.gov (United States)

Lemos, Marina Serra; Rothes, Inês Areal; Oliveira, Filipa; Soares, Luisa

2017-01-01

Objective: To evaluate the incremental efficacy of a Short Message Service (SMS) combined with a brief video intervention in increasing the effects of a health education intervention for cervical cancer prevention, over and beyond a video-alone intervention, with respect to key determinants of health behaviour change--knowledge, motivation and…

The Interpersonal Measure of Psychopathy: Construct and Incremental Validity in Male Prisoners

Science.gov (United States)

Zolondek, Stacey; Lilienfeld, Scott O.; Patrick, Christopher J.; Fowler, Katherine A.

2006-01-01

The authors examined the construct and incremental validity of the Interpersonal Measure of Psychopathy (IM-P), a relatively new instrument designed to detect interpersonal behaviors associated with psychopathy. Observers of videotaped Psychopathy Checklist-Revised (PCL-R) interviews rated male prisoners (N = 93) on the IM-P. The IM-P correlated…

Investigating Postgraduate College Admission Interviews: Generalizability Theory Reliability and Incremental Predictive Validity

Science.gov (United States)

Arce-Ferrer, Alvaro J.; Castillo, Irene Borges

2007-01-01

The use of face-to-face interviews is controversial for college admissions decisions in light of the lack of availability of validity and reliability evidence for most college admission processes. This study investigated reliability and incremental predictive validity of a face-to-face postgraduate college admission interview with a sample of…

Gradient nanostructured surface of a Cu plate processed by incremental frictional sliding

DEFF Research Database (Denmark)

Hong, Chuanshi; Huang, Xiaoxu; Hansen, Niels

2015-01-01

The flat surface of a Cu plate was processed by incremental frictional sliding at liquid nitrogen temperature. The surface treatment results in a hardened gradient surface layer as thick as 1 mm in the Cu plate, which contains a nanostructured layer on the top with a boundary spacing of the order...

TCAM-based High Speed Longest Prefix Matching with Fast Incremental Table Updates

DEFF Research Database (Denmark)

Rasmussen, Anders; Kragelund, A.; Berger, Michael Stübert

2013-01-01

and consequently a higher throughput of the network search engine, since the TCAM down time caused by incremental updates is eliminated. The LPM scheme is described in HDL for FPGA implementation and compared to an existing scheme for customized CAM circuits. The paper shows that the proposed scheme can process...

CÁLCULO DO CUSTO DAS ATIVIDADES DE GESTÃO AMBIENTAL: APLICAÇÃO DO CUSTEIO BASEADO EM ATIVIDADES NUMA MONTADORA DE ÔNIBUS ENVIRONMENTAL MANAGEMENT COST CALCULATION: ACTIVITY BASED COSTING APPLIED TO BUS ASSEMBLY PROCESS

Directory of Open Access Journals (Sweden)

Orlando Durán

2007-08-01

Full Text Available Este trabalho apresenta os resultados da aplicação da metodologia de custeio baseado em atividades para medir o impacto que as atividades de gestão ambiental podem ter no custo industrial dos produtos. Um estudo de caso é apresentado junto com a utilização de um software comercial para o cálculo dos custos.This manuscript presents an Activity Based Costing application in an environmental protection context. The aim of this work is measuring the impact of environmental management activities on product costs. Also, a case study is discussed and the utilization of commercial software is presented.

Biomedical Titanium alloy prostheses manufacturing by means of Superplastic and Incremental Forming processes

Directory of Open Access Journals (Sweden)

Piccininni Antonio

2016-01-01

Full Text Available The present work collects some results of the three-years Research Program “BioForming“, funded by the Italian Ministry of Education (MIUR and aimed to investigate the possibility of using flexible sheet forming processes, i.e. Super Plastic Forming (SPF and Single Point Incremental Forming (SPIF, for the manufacturing of patient-oriented titanium prostheses. The prosthetic implants used as case studies were from the skull; in particular, two different Ti alloys and geometries were considered: one to be produced in Ti-Gr23 by SPF and one to be produced in Ti-Gr2 by SPIF. Numerical simulations implementing material behaviours evaluated by characterization tests were conducted in order to design both the manufacturing processes. Subsequently, experimental tests were carried out implementing numerical results in terms of: (i gas pressure profile able to determine a constant (and optimal strain rate during the SPF process; (ii tool path able to avoid rupture during the SPIF process. Post forming characteristics of the prostheses in terms of thickness distributions were measured and compared to data from simulations for validation purposes. A good correlation between numerical and experimental thickness distributions has been obtained; in addition, the possibility of successfully adopting both the SPF and the SPIF processes for the manufacturing of prostheses has been demonstrated.

The use of single point incremental forming for customized implants of unicondylar knee arthroplasty: a review

Directory of Open Access Journals (Sweden)

Pankaj Kailasrao Bhoyar

Full Text Available Abstract Introduction The implantable devices are having enormous market. These products are basically made by traditional manufacturing process, but for the custom-made implants Incremental Sheet Forming is a paramount alternative. Single Point Incremental Forming (SPIF is a manufacturing process to form intricate, asymmetrical components. It forms the component using stretching and bending by maintaining materials crystal structure. SPIF process can be performed using conventional Computer Numerical Control (CNC milling machine. Review This review paper elaborates the various manufacturing processes carried on various biocompatible metallic and nonmetallic customised implantable devices. Conclusion Ti-6Al-4V alloy is broadly used for biomedical implants, but in this alloy, Vanadium is toxic so this alloy is not compatible for implants. The attention of researchers is towards the non toxic and suitable biocompatible materials. For this reason, a novel approach was developed in order to enhance the mechanical properties of this material. . The development of incremental forming technique can improve the formability of existing alloys and may meet the current strict requirements for performance of dies and punches.

Mutual-Information-Based Incremental Relaying Communications for Wireless Biomedical Implant Systems

Directory of Open Access Journals (Sweden)

Yangzhe Liao

2018-02-01

Full Text Available Network lifetime maximization of wireless biomedical implant systems is one of the major research challenges of wireless body area networks (WBANs. In this paper, a mutual information (MI-based incremental relaying communication protocol is presented where several on-body relay nodes and one coordinator are attached to the clothes of a patient. Firstly, a comprehensive analysis of a system model is investigated in terms of channel path loss, energy consumption, and the outage probability from the network perspective. Secondly, only when the MI value becomes smaller than the predetermined threshold is data transmission allowed. The communication path selection can be either from the implanted sensor to the on-body relay then forwards to the coordinator or from the implanted sensor to the coordinator directly, depending on the communication distance. Moreover, mathematical models of quality of service (QoS metrics are derived along with the related subjective functions. The results show that the MI-based incremental relaying technique achieves better performance in comparison to our previous proposed protocol techniques regarding several selected performance metrics. The outcome of this paper can be applied to intra-body continuous physiological signal monitoring, artificial biofeedback-oriented WBANs, and telemedicine system design.

A numerical analysis on forming limits during spiral and concentric single point incremental forming

Science.gov (United States)

Gipiela, M. L.; Amauri, V.; Nikhare, C.; Marcondes, P. V. P.

2017-01-01

Sheet metal forming is one of the major manufacturing industries, which are building numerous parts for aerospace, automotive and medical industry. Due to the high demand in vehicle industry and environmental regulations on less fuel consumption on other hand, researchers are innovating new methods to build these parts with energy efficient sheet metal forming process instead of conventionally used punch and die to form the parts to achieve the lightweight parts. One of the most recognized manufacturing process in this category is Single Point Incremental Forming (SPIF). SPIF is the die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any process time to plastic deformation zone. In the present work, finite element method (FEM) is applied to analyze the forming limits of high strength low alloy steel formed by single point incremental forming (SPIF) by spiral and concentric tool path. SPIF numerical simulations were model with 24 and 29 mm cup depth, and the results were compare with Nakajima results obtained by experiments and FEM. It was found that the cup formed with Nakajima tool failed at 24 mm while cups formed by SPIF surpassed the limit for both depths with both profiles. It was also notice that the strain achieved in concentric profile are lower than that in spiral profile.

Cyclic and seasonal features in the behaviour of linear growth increment of Rayleigh-Taylor instability in equatorial F-region

International Nuclear Information System (INIS)

Farkullin, M.N.; Nikitin, M.A.; Kashchenko, N.M.

1989-01-01

Calculations of linear increment of the Rayleigh-Taylor instability for various geophysical conditions are presented. It is shwn that space-time characteristics of increment depend strongly on conditions of solar activity and seasons. The calculation results are in a good agreement with statistical regularities of F-scattering observation in equatorial F-area, which points to the Rayleigh-Taylor natur of the penomena

Comparison Between 30-15 Intermittent Fitness Test and Multistage Field Test on Physiological Responses in Wheelchair Basketball Players

OpenAIRE

Weissland, Thierry; Faupin, Arnaud; Borel, Benoit; Leprêtre, Pierre-Marie

2015-01-01

The intermittent nature of wheelchair court sports suggests using a similar protocol to assess repeated shuttles and recovery abilities. This study aimed to compare performances, physiological responses and perceived rating exertion obtained from the continuous multistage field test (MFT) and the 30-15 intermittent field test (30-15IFT). Eighteen trained wheelchair basketball players (WBP) (WBP: 32.0 ? 5.7 y, IWBF classification: 2.9 ? 1.1 points) performed both incremental field tests in ran...

Are Fearless Dominance Traits Superfluous in Operationalizing Psychopathy? Incremental Validity and Sex Differences

Science.gov (United States)

Murphy, Brett; Lilienfeld, Scott; Skeem, Jennifer; Edens, John

2016-01-01

Researchers are vigorously debating whether psychopathic personality includes seemingly adaptive traits, especially social and physical boldness. In a large sample (N=1565) of adult offenders, we examined the incremental validity of two operationalizations of boldness (Fearless Dominance traits in the Psychopathy Personality Inventory, Lilienfeld & Andrews, 1996; Boldness traits in the Triarchic Model of Psychopathy, Patrick et al, 2009), above and beyond other characteristics of psychopathy, in statistically predicting scores on four psychopathy-related measures, including the Psychopathy Checklist-Revised (PCL-R). The incremental validity added by boldness traits in predicting the PCL-R’s representation of psychopathy was especially pronounced for interpersonal traits (e.g., superficial charm, deceitfulness). Our analyses, however, revealed unexpected sex differences in the relevance of these traits to psychopathy, with boldness traits exhibiting reduced importance for psychopathy in women. We discuss the implications of these findings for measurement models of psychopathy. PMID:26866795

Is incremental hemodialysis ready to return on the scene? From empiricism to kinetic modelling.

Science.gov (United States)

Basile, Carlo; Casino, Francesco Gaetano; Kalantar-Zadeh, Kamyar

2017-08-01

Most people who make the transition to maintenance dialysis therapy are treated with a fixed dose thrice-weekly hemodialysis regimen without considering their residual kidney function (RKF). The RKF provides effective and naturally continuous clearance of both small and middle molecules, plays a major role in metabolic homeostasis, nutritional status, and cardiovascular health, and aids in fluid management. The RKF is associated with better patient survival and greater health-related quality of life, although these effects may be confounded by patient comorbidities. Preservation of the RKF requires a careful approach, including regular monitoring, avoidance of nephrotoxins, gentle control of blood pressure to avoid intradialytic hypotension, and an individualized dialysis prescription including the consideration of incremental hemodialysis. There is currently no standardized method for applying incremental hemodialysis in practice. Infrequent (once- to twice-weekly) hemodialysis regimens are often used arbitrarily, without knowing which patients would benefit the most from them or how to escalate the dialysis dose as RKF declines over time. The recently heightened interest in incremental hemodialysis has been hindered by the current limitations of the urea kinetic models (UKM) which tend to overestimate the dialysis dose required in the presence of substantial RKF. This is due to an erroneous extrapolation of the equivalence between renal urea clearance (Kru) and dialyser urea clearance (Kd), correctly assumed by the UKM, to the clinical domain. In this context, each ml/min of Kd clears the urea from the blood just as 1 ml/min of Kru does. By no means should such kinetic equivalence imply that 1 ml/min of Kd is clinically equivalent to 1 ml/min of urea clearance provided by the native kidneys. A recent paper by Casino and Basile suggested a variable target model (VTM) as opposed to the fixed model, because the VTM gives more clinical weight to the RKF and allows

Design and testing of a perimeter of increment threshold by projection

OpenAIRE

García Domene, María del Carmen; Luque Cobija, María José; Fez Saiz, Dolores de

2017-01-01

In the present study, we have designed and tested a perimeter for the detection of damage in the chromatic mechanisms using a video projector. To this purpose, we have characterized pixel to pixel a video projector, to account for the inhomogeneities in the projection. We have measured the tristimulus values of the projector primaries as a function of digital level, at 49 locations of the projection screen and, from them, we have arrived to a characterization model which reduces the color dif...

Optimal Output of Distributed Generation Based On Complex Power Increment

Science.gov (United States)

Wu, D.; Bao, H.

2017-12-01

In order to meet the growing demand for electricity and improve the cleanliness of power generation, new energy generation, represented by wind power generation, photovoltaic power generation, etc has been widely used. The new energy power generation access to distribution network in the form of distributed generation, consumed by local load. However, with the increase of the scale of distribution generation access to the network, the optimization of its power output is becoming more and more prominent, which needs further study. Classical optimization methods often use extended sensitivity method to obtain the relationship between different power generators, but ignore the coupling parameter between nodes makes the results are not accurate; heuristic algorithm also has defects such as slow calculation speed, uncertain outcomes. This article proposes a method called complex power increment, the essence of this method is the analysis of the power grid under steady power flow. After analyzing the results we can obtain the complex scaling function equation between the power supplies, the coefficient of the equation is based on the impedance parameter of the network, so the description of the relation of variables to the coefficients is more precise Thus, the method can accurately describe the power increment relationship, and can obtain the power optimization scheme more accurately and quickly than the extended sensitivity method and heuristic method.

How to Understand Incrementalism?: Politics of Charles Lindblom’s Theory

Directory of Open Access Journals (Sweden)

Krešimir Petković

2007-01-01

Full Text Available The paper is dedicated to the political process theory by the American political scientist and economist Charles E. Lindblom. After providing a contextual insight into Lindblom’s complete theoretical opus, which is a necessary prerequisite for the interpretative manoeuvre in the central part of the text, the paper is primarily focused on Lindblom’s theory of incremental decision-making, developed in The Science of Muddling Through (1959 and in A Strategy of Decision (1963, which is related to his concept of “partisan mutual adjustment” developed in The Intelligence of Democracy (1965. The paper offers an interpretation of Lindblom’s argument which moves away from its past understanding in Croatian political science literature. There, Lindblom’s decision-making model has been basically interpreted descriptively, as a description of the actual decision-making practices, and opposed to the prescriptive rational decision-making model, which is a characteristic feature even of some foreign interpretations. This paper, however, suggests that Lindblom’s theory contains a strong prescriptive element. Lindblom’s theory of incrementalism, taken together with the pluralist model of partisan mutual adjustment, offers a complete and consistent model of politics with marked normative implications, which justifies the use of the syntagm the politics of theory, substantiated in greater detail in the final section of the paper.

Noninvasive detection of change in skeletal muscle oxygenation during incremental exercise with near-infrared spectroscopy

Science.gov (United States)

Liu, Fang; Luo, Qingming; Xu, Guodong; Li, Pengcheng

2003-12-01

Near infrared spectroscopy (NIRS) has been developed as a non-invasive method to assess O2 delivery, O2 consumption and blood flow, in diverse local muscle groups at rest and during exercise. The aim of this study was to investigate local O2 consumption in exercising muscle by use of near-infrared spectroscopy (NIRS). Ten elite athletes of different sport items were tested in rest and during step incremental load exercise. Local variations of quadriceps muscles were investigated with our wireless NIRS blood oxygen monitor system. The results show that the changes of blood oxygen relate on the sport items, type of muscle, kinetic capacity et al. These results indicate that NIRS is a potential useful tool to detect local muscle oxygenation and blood flow profiles; therefore it might be easily applied for evaluating the effect of athletes training.

Incremental Knowledge Acquisition for WSD: A Rough Set and IL based Method

Directory of Open Access Journals (Sweden)

Xu Huang

2015-07-01

Full Text Available Word sense disambiguation (WSD is one of tricky tasks in natural language processing (NLP as it needs to take into full account all the complexities of language. Because WSD involves in discovering semantic structures from unstructured text, automatic knowledge acquisition of word sense is profoundly difficult. To acquire knowledge about Chinese multi-sense verbs, we introduce an incremental machine learning method which combines rough set method and instance based learning. First, context of a multi-sense verb is extracted into a table; its sense is annotated by a skilled human and stored in the same table. By this way, decision table is formed, and then rules can be extracted within the framework of attributive value reduction of rough set. Instances not entailed by any rule are treated as outliers. When new instances are added to decision table, only the new added and outliers need to be learned further, thus incremental leaning is fulfilled. Experiments show the scale of decision table can be reduced dramatically by this method without performance decline.

Performance and delay analysis of hybrid ARQ with incremental redundancy over double rayleigh fading channels

KAUST Repository

Chelli, Ali

2014-11-01

In this paper, we study the performance of hybrid automatic repeat request (HARQ) with incremental redundancy over double Rayleigh channels, a common model for the fading amplitude of vehicle-to-vehicle communication systems. We investigate the performance of HARQ from an information theoretic perspective. Analytical expressions are derived for the \\\\epsilon-outage capacity, the average number of transmissions, and the average transmission rate of HARQ with incremental redundancy assuming a maximum number of HARQ rounds. Moreover, we evaluate the delay experienced by Poisson arriving packets for HARQ with incremental redundancy. We provide analytical expressions for the expected waiting time, the packet\\'s sojourn time in the queue, the average consumed power, and the energy efficiency. In our study, the communication rate per HARQ round is adjusted to the average signal-to-noise ratio (SNR) such that a target outage probability is not exceeded. This setting conforms with communication systems in which a quality of service is expected regardless of the channel conditions. Our analysis underscores the importance of HARQ in improving the spectral efficiency and reliability of communication systems. We demonstrate as well that the explored HARQ scheme achieves full diversity. Additionally, we investigate the tradeoff between energy efficiency and spectral efficiency.

Transferring the Incremental Capacity Analysis to Lithium-Sulfur Batteries

DEFF Research Database (Denmark)

Knap, Vaclav; Kalogiannis, Theodoros; Purkayastha, Rajlakshmi

2017-01-01

In order to investigate the battery degradation and to estimate their health, various techniques can be applied. One of them, which is widely used for Lithium-ion batteries, is the incremental capacity analysis (ICA). In this work, we apply the ICA to Lithium-Sulfur batteries, which differ in many...... aspects from Lithium-ion batteries and possess unique behavior. One of the challenges of applying the ICA to Lithium-Sulfur batteries is the representation of the IC curves, as their voltage profiles are often non-monotonic, resulting in more complex IC curves. The ICA is at first applied to charge...

Complex Physiological Response of Norway Spruce to Atmospheric Pollution - Decreased Carbon Isotope Discrimination and Unchanged Tree Biomass Increment.

Science.gov (United States)

Čada, Vojtěch; Šantrůčková, Hana; Šantrůček, Jiří; Kubištová, Lenka; Seedre, Meelis; Svoboda, Miroslav

2016-01-01

Atmospheric pollution critically affects forest ecosystems around the world by directly impacting the assimilation apparatus of trees and indirectly by altering soil conditions, which subsequently also leads to changes in carbon cycling. To evaluate the extent of the physiological effect of moderate level sulfate and reactive nitrogen acidic deposition, we performed a retrospective dendrochronological analysis of several physiological parameters derived from periodic measurements of carbon stable isotope composition ((13)C discrimination, intercellular CO2 concentration and intrinsic water use efficiency) and annual diameter increments (tree biomass increment, its inter-annual variability and correlation with temperature, cloud cover, precipitation and Palmer drought severity index). The analysis was performed in two mountain Norway spruce (Picea abies) stands of the Bohemian Forest (Czech Republic, central Europe), where moderate levels of pollution peaked in the 1970s and 1980s and no evident impact on tree growth or link to mortality has been reported. The significant influence of pollution on trees was expressed most sensitively by a 1.88‰ reduction of carbon isotope discrimination (Δ(13)C). The effects of atmospheric pollution interacted with increasing atmospheric CO2 concentration and temperature. As a result, we observed no change in intercellular CO2 concentrations (Ci), an abrupt increase in water use efficiency (iWUE) and no change in biomass increment, which could also partly result from changes in carbon partitioning (e.g., from below- to above-ground). The biomass increment was significantly related to Δ(13)C on an individual tree level, but the relationship was lost during the pollution period. We suggest that this was caused by a shift from the dominant influence of the photosynthetic rate to stomatal conductance on Δ(13)C during the pollution period. Using biomass increment-climate correlation analyses, we did not identify any clear pollution

The limit distribution of the maximum increment of a random walk with regularly varying jump size distribution

DEFF Research Database (Denmark)

Mikosch, Thomas Valentin; Rackauskas, Alfredas

2010-01-01

In this paper, we deal with the asymptotic distribution of the maximum increment of a random walk with a regularly varying jump size distribution. This problem is motivated by a long-standing problem on change point detection for epidemic alternatives. It turns out that the limit distribution...... of the maximum increment of the random walk is one of the classical extreme value distributions, the Fréchet distribution. We prove the results in the general framework of point processes and for jump sizes taking values in a separable Banach space...

Significant increment in the prevalence of overweight and obesity documented between 1994 and 2008 in Mexican college students

Directory of Open Access Journals (Sweden)

Cuevas-Ramos D

2010-04-01

Full Text Available H García-Alcala1, D Cuevas-Ramos2, Ch Genestier-Tamborero1, O Hirales-Tamez1, P Almeda-Valdés2, R Mehta2, CA Aguilar-Salinas21Universidad Popular Autónoma del Estado de Puebla, Puebla, Mexico; 2Department of Endocrinology, Instituto Nacional de Ciencias Medicas y Nutricion “Salvador Zubiran” (INC MNSZ, Mexico City, MexicoAbstract: We describe the changes in the prevalence of overweight and obesity in 4606 students that applied to a Mexican University during 1994 to 2008. The mean (± standard deviation [SD] age was 17.7 ± 1.2 years-old. Progressive and significant increments of bodyweight (female [F] = 2.6, P = 0.03, body mass index (BMI (F = 4.4, P = 0.001, and waist circumference (F = 30.08, P < 0.0001 in women, and bodyweight (male [M] = 8.9, P < 0.001, BMI (M = 10.4, P < 0.001, and waist circumference (M = 13.01, P < 0.001 in men were observed. A significant increment (P < 0.05 in the prevalence of overweight since 1994 (n = 87, 12.1% throughout 1997 (n = 102, 14.1%, 1998 (n = 133, 18.4%, 1999 (n = 1993, 26.8%, and 2008 (n = 206, 19.9% was documented. Similarly, the prevalence of obesity had a significant increment in all students evaluated (P < 0.0001 since 1994 (n = 29, 13.2% through 1997 (n = 11, 5.0%, 1998 (n = 45, 20.5%, 1999 (n = 53, 24.1%, and 2008 (n = 82, 37.3%. The increment was significant in both women (P = 0.02 and men (P < 0.001. In summary, we report a significant increment in the prevalence of overweight and obesity in Mexican students living in an urban setting over a time period of 14 years.Keywords: body mass index, adolescents, weight problems, obese

On the Perturb-and-Observe and Incremental Conductance MPPT methods for PV systems

DEFF Research Database (Denmark)

Sera, Dezso; Mathe, Laszlo; Kerekes, Tamas

2013-01-01

This paper presents a detailed analysis of the two most well-known hill-climbing MPPT algorithms, the Perturb-and-Observe (P&O) and Incremental Conductance (INC). The purpose of the analysis is to clarify some common misconceptions in the literature regarding these two trackers, therefore helping...

Unified performance analysis of hybrid-ARQ with incremental redundancy over free-space optical channels

KAUST Repository

Zedini, Emna; Chelli, Ali; Alouini, Mohamed-Slim

2014-01-01

In this paper, we carry out a unified performance analysis of hybrid automatic repeat request (HARQ) with incremental redundancy (IR) from an information theoretic perspective over a point-to-point free-space optical (FSO) system. First, we

Validation of Growth Layer Group (GLG depositional rate using daily incremental growth lines in the dentin of beluga (Delphinapterus leucas (Pallas, 1776 teeth.

Directory of Open Access Journals (Sweden)

David A Waugh

Full Text Available Counts of Growth Layer Groups (GLGs in the dentin of marine mammal teeth are widely used as indicators of age. In most marine mammals, observations document that GLGs are deposited yearly, but in beluga whales, some studies have supported the view that two GLGs are deposited each year. Our understanding of beluga life-history differs substantially depending on assumptions regarding the timing of GLG deposition; therefore, resolving this issue has important considerations for population assessments. In this study, we used incremental lines that represent daily pulses of dentin mineralization to test the hypothesis that GLGs in beluga dentin are deposited on a yearly basis. Our estimate of the number of daily growth lines within one GLG is remarkably close to 365 days within error, supporting the hypothesis that GLGs are deposited annually in beluga. We show that measurement of daily growth increments can be used to validate the time represented by GLGs in beluga. Furthermore, we believe this methodology may have broader applications to age estimation in other taxa.

Job Embeddedness Demonstrates Incremental Validity When Predicting Turnover Intentions for Australian University Employees

Science.gov (United States)

Heritage, Brody; Gilbert, Jessica M.; Roberts, Lynne D.

2016-01-01

Job embeddedness is a construct that describes the manner in which employees can be enmeshed in their jobs, reducing their turnover intentions. Recent questions regarding the properties of quantitative job embeddedness measures, and their predictive utility, have been raised. Our study compared two competing reflective measures of job embeddedness, examining their convergent, criterion, and incremental validity, as a means of addressing these questions. Cross-sectional quantitative data from 246 Australian university employees (146 academic; 100 professional) was gathered. Our findings indicated that the two compared measures of job embeddedness were convergent when total scale scores were examined. Additionally, job embeddedness was capable of demonstrating criterion and incremental validity, predicting unique variance in turnover intention. However, this finding was not readily apparent with one of the compared job embeddedness measures, which demonstrated comparatively weaker evidence of validity. We discuss the theoretical and applied implications of these findings, noting that job embeddedness has a complementary place among established determinants of turnover intention. PMID:27199817

Political dynamics promoting the incremental regulation of secondhand smoke: a case study of New South Wales, Australia

Directory of Open Access Journals (Sweden)

Chapman Simon

2006-07-01

Full Text Available Abstract Background The history of governmental responses to the accumulation of scientific evidence about the harms of secondhand smoke (SHS presents an intriguing case study of incremental public health policy development. Australia has long been considered a world-leader in progressive tobacco control policies, but in the last decade has fallen behind other jurisdictions in introducing SHS legislation that protects all workers. Bars, clubs and pubs remain the only public indoor spaces where smoking is legally permitted, despite SHS exposure in the hospitality industry being higher and affecting more people than in any other setting after domestic exposure. This paper examines the political dynamics that have shaped this incremental approach to SHS. Methods In-depth interviews with 21 key stakeholders in the state of New South Wales (NSW, including politicians, their advisors, health officials and tobacco control advocates, were conducted and subjected to thematic content analysis. Interviewees' comments provided insights into the dynamics surrounding the debates and outcomes of SHS legislative attempts and the current political environment, and about how to progress SHS legislation. Results SHS restrictions have been delayed by several broad factors: the influence of industry groups successfully opposing regulation; issue wear-out; and political perceptions that there is not a salient constituency demanding that smoking be banned in bars and clubs. Interviewees also provided suggestions of strategies that advocates might utilise to best overcome the current political inertia of incremental compromises and achieve timely comprehensive smoking bans. Conclusion Advocates concerned to shorten the duration of incremental endgames must continue to insist that governments address SHS fundamentally as a health issue rather than making political concessions to industry groups, and should broaden and amplify community voices calling on governments to

Metodologia e validação de design estrutural baseado em desempenho para concepção de estrutura de torre eólica

Directory of Open Access Journals (Sweden)

Marina Ferreira Borges

Full Text Available Resumo Neste trabalho é estudado o processo de projeto baseado em desempenho por meio do desenvolvimento de modelos paramétricos e algorítmicos, integrando análise estrutural ao design para a geração de estruturas geométricas complexas, com base em parâmetros de produção e montagem. Essa metodologia baseia-se no Modelo Performativo, em que a forma é gerada utilizando-se critérios de desempenho. Nessa abordagem o desenvolvimento de estruturas complexas só é possível pela reversão do processo de concepção da forma, cuja geração está atrelada aos parâmetros de geometria, material e carregamento. Assim, o engenheiro estrutural não participa apenas da fase de avaliação, mas também das fases iniciais do processo, criando um processo de pesquisa e produção de conhecimento comum entre os arquitetos e engenheiros. Para investigar essa abordagem, neste artigo é feita a concepção da estrutura de uma torre de energia eólica.

Brief implicit association test: Validity and utility in prediction of voting behavior

Directory of Open Access Journals (Sweden)

Pavlović Maša D.

2013-01-01

Full Text Available We employed the Brief Implicit Association Test (a recently developed short version of IAT to measure implicit political attitudes toward four political parties running for Serbian parliament. To test its criterion validity, we measured voting intention and actual voting behavior. In addition, we introduced political involvement as a potential moderator of the BIAT’s predictive and incremental validity. The BIAT demonstrated good internal and predictive validity, but lacked incremental validity over self-report measures. Predictive power of the BIAT was moderated by political involvement - the BIAT scores were stronger predictors of voting intention and behavior among voters highly involved in politics. [Projekat Ministarstva nauke Republike Srbije, br. 179018

Influence of different open circuit voltage tests on state of charge online estimation for lithium-ion batteries

International Nuclear Information System (INIS)

Zheng, Fangdan; Xing, Yinjiao; Jiang, Jiuchun; Sun, Bingxiang; Kim, Jonghoon; Pecht, Michael

2016-01-01

Highlights: • Two common tests for observing battery open circuit voltage performance are compared. • The temperature dependency of the OCV-SOC relationship is investigated. • Two estimators are evaluated in terms of accuracy and robustness for estimating battery SOC. • The incremental OCV test is better to predetermine the OCV-SOCs for SOC online estimation. - Abstract: Battery state of charge (SOC) estimation is a crucial function of battery management systems (BMSs), since accurate estimated SOC is critical to ensure the safety and reliability of electric vehicles. A widely used technique for SOC estimation is based on online inference of battery open circuit voltage (OCV). Low-current OCV and incremental OCV tests are two common methods to observe the OCV-SOC relationship, which is an important element of the SOC estimation technique. In this paper, two OCV tests are run at three different temperatures and based on which, two SOC estimators are compared and evaluated in terms of tracking accuracy, convergence time, and robustness for online estimating battery SOC. The temperature dependency of the OCV-SOC relationship is investigated and its influence on SOC estimation results is discussed. In addition, four dynamic tests are presented, one for estimator parameter identification and the other three for estimator performance evaluation. The comparison results show that estimator 2 (based on the incremental OCV test) has higher tracking accuracy and is more robust against varied loading conditions and different initial values of SOC than estimator 1 (based on the low-current OCV test) with regard to ambient temperature. Therefore, the incremental OCV test is recommended for predetermining the OCV-SOCs for battery SOC online estimation in BMSs.

Increment of specific heat capacity of solar salt with SiO2 nanoparticles.

Science.gov (United States)

Andreu-Cabedo, Patricia; Mondragon, Rosa; Hernandez, Leonor; Martinez-Cuenca, Raul; Cabedo, Luis; Julia, J Enrique

2014-01-01

Thermal energy storage (TES) is extremely important in concentrated solar power (CSP) plants since it represents the main difference and advantage of CSP plants with respect to other renewable energy sources such as wind, photovoltaic, etc. CSP represents a low-carbon emission renewable source of energy, and TES allows CSP plants to have energy availability and dispatchability using available industrial technologies. Molten salts are used in CSP plants as a TES material because of their high operational temperature and stability of up to 500°C. Their main drawbacks are their relative poor thermal properties and energy storage density. A simple cost-effective way to improve thermal properties of fluids is to dope them with nanoparticles, thus obtaining the so-called salt-based nanofluids. In this work, solar salt used in CSP plants (60% NaNO3 + 40% KNO3) was doped with silica nanoparticles at different solid mass concentrations (from 0.5% to 2%). Specific heat was measured by means of differential scanning calorimetry (DSC). A maximum increase of 25.03% was found at an optimal concentration of 1 wt.% of nanoparticles. The size distribution of nanoparticle clusters present in the salt at each concentration was evaluated by means of scanning electron microscopy (SEM) and image processing, as well as by means of dynamic light scattering (DLS). The cluster size and the specific surface available depended on the solid content, and a relationship between the specific heat increment and the available particle surface area was obtained. It was proved that the mechanism involved in the specific heat increment is based on a surface phenomenon. Stability of samples was tested for several thermal cycles and thermogravimetric analysis at high temperature was carried out, the samples being stable. 65.: Thermal properties of condensed matter; 65.20.-w: Thermal properties of liquids; 65.20.Jk: Studies of thermodynamic properties of specific liquids.

Quantifying cardiorespiratory responses resulting from speed and slope increments during motorized treadmill propulsion among manual wheelchair users.

Science.gov (United States)

Gauthier, Cindy; Grangeon, Murielle; Ananos, Ludivine; Brosseau, Rachel; Gagnon, Dany H

2017-09-01

Cardiorespiratory fitness assessment and training among manual wheelchair (MW) users are predominantly done with an arm-crank ergometer. However, arm-crank ergometer biomechanics differ substantially from MW propulsion biomechanics. This study aimed to quantify cardiorespiratory responses resulting from speed and slope increments during MW propulsion on a motorized treadmill and to calculate a predictive equation based on speed and slope for estimating peak oxygen uptake (VO 2peak ) in MW users. In total, 17 long-term MW users completed 12 MW propulsion periods (PP), each lasting 2min, on a motorized treadmill, in a random order. Each PP was separated by a 2-min rest. PPs were characterized by a combination of 3 speeds (0.6, 0.8 and 1.0m/s) and 4 slopes (0°, 2.7°, 3.6° and 4.8°). Six key cardiorespiratory outcome measures (VO 2 , heart rate, respiratory rate, minute ventilation and tidal volume) were recorded by using a gas-exchange analysis system. Rate of perceived exertion (RPE) was measured by using the modified 10-point Borg scale after each PP. For the 14 participants who completed the test, cardiorespiratory responses increased in response to speed and/or slope increments, except those recorded between the 3.6 o and 4.8 o slope, for which most outcome measures were comparable. The RPE was positively associated with cardiorespiratory response (r s ≥0.85). A VO 2 predictive equation (R 2 =99.7%) based on speed and slope for each PP was computed. This equation informed the development of a future testing protocol to linearly increase VO 2 via 1-min stages during treadmill MW propulsion. Increasing speed and slope while propelling a MW on a motorized treadmill increases cardiorespiratory response along with RPE. RPE can be used to easily and accurately monitor cardiorespiratory responses during MW exercise. The VO 2 can be predicted to some extent by speed and slope during MW propulsion. A testing protocol is proposed to assess cardiorespiratory fitness

Analogical reasoning: An incremental or insightful process? What cognitive and cortical evidence suggests.

Science.gov (United States)

Antonietti, Alessandro; Balconi, Michela

2010-06-01

Abstract The step-by-step, incremental nature of analogical reasoning can be questioned, since analogy making appears to be an insight-like process. This alternative view of analogical thinking can be integrated in Speed's model, even though the alleged role played by dopaminergic subcortical circuits needs further supporting evidence.

Capillary gas chromatography of alkylbenzenes II. Correlations between the structures and methylene group increments and differences in retention indices of isomers

NARCIS (Netherlands)

Sojak, L.; Janak, J.; Rijks, J.A.

1977-01-01

The contribution to gas chromatographic retention behaviour of methylene group increments and differences in the retention indices (dI) of isomers of alkylbenzenes up to C16 on squalane and acetyltri-n-butyl citrate was studied. The methylene group increments appear to vary over a wide range (60–100

When Natural Disaster Follows Economic Downturn: The Incremental Impact of Multiple Stressor Events on Trajectories of Depression and Posttraumatic Stress Disorder.

Science.gov (United States)

Mandavia, Amar D; Bonanno, George A

2018-04-29

To determine whether there were incremental mental health impacts, specifically on depression trajectories, as a result of the 2008 economic crisis (the Great Recession) and subsequent Hurricane Sandy. Using latent growth mixture modeling and the ORANJ BOWL dataset, we examined prospective trajectories of depression among older adults (mean age, 60.67; SD, 6.86) who were exposed to the 2 events. We also collected community economic and criminal justice data to examine their impact upon depression trajectories. Participants (N=1172) were assessed at 3 times for affect, successful aging, and symptoms of depression. We additionally assessed posttraumatic stress disorder (PTSD) symptomology after Hurricane Sandy. We identified 3 prospective trajectories of depression. The majority (83.6%) had no significant change in depression from before to after these events (resilience), while 7.2% of the sample increased in depression incrementally after each event (incremental depression). A third group (9.2%) went from high to low depression symptomology following the 2 events (depressive-improving). Only those in the incremental depression group had significant PTSD symptoms following Hurricane Sandy. We identified a small group of individuals for whom the experience of multiple stressful events had an incremental negative effect on mental health outcomes. These results highlight the importance of understanding the perseveration of depression symptomology from one event to another. (Disaster Med Public Health Preparedness. 2018;page 1 of 10).

The intake of long chain omega 3 fatty acids through fish versus capsules results in greater increments of their plasma levels

Directory of Open Access Journals (Sweden)

Visioli Francesco

2004-03-01

Full Text Available Omega 3 fatty acids from fish appear to be more cardioprotective than equivalent amounts provided as capsules. We gave volunteers, for six weeks, either 100 g\\\\day of salmon, providing 383 mg of EPA and 544 mg of DHA or one or three capsules of fish oil\\\\day, providing 150 mg of EPA and 106 mg of DHA or 450 mg of EPA and 318 mg of DHA. We also re-evaluated data from a previous study carried out with the same design. Marked increments in plasma EPA and DHA concentrations (μg\\\\mg total lipid and percentages of total fatty acids were recorded at the end of either treatment. Such increments were linearly and significantly correlated with the dose after capsule administration. Notably, increments in plasma EPA and DHA concentration after salmon intake were significantly higher than after administration of capsules. In fact, the same increments would be obtained with at least two- and nine-fold higher doses of EPA and DHA, respectively, if administered with capsules rather than salmon. In turn, we provide experimental evidence that omega 3 fatty acids from fish are more effectively incorporated into plasma lipids than when administered as capsules and that increments in plasma concentrations of EPA and DHA given as capsules are linearly correlated with their intakes.

A diameter increment model for Red Fir in California and Southern Oregon

Science.gov (United States)

K. Leroy Dolph

1992-01-01

Periodic (10-year) diameter increment of individual red fir trees in Califomia and southern Oregon can be predicted from initial diameter and crown ratio of each tree, site index, percent slope, and aspect of the site. The model actually predicts the natural logarithm ofthe change in squared diameter inside bark between the startand the end of a 10-year growth period....

Adaptive Incremental Genetic Algorithm for Task Scheduling in Cloud Environments

Directory of Open Access Journals (Sweden)

Kairong Duan

2018-05-01

Full Text Available Cloud computing is a new commercial model that enables customers to acquire large amounts of virtual resources on demand. Resources including hardware and software can be delivered as services and measured by specific usage of storage, processing, bandwidth, etc. In Cloud computing, task scheduling is a process of mapping cloud tasks to Virtual Machines (VMs. When binding the tasks to VMs, the scheduling strategy has an important influence on the efficiency of datacenter and related energy consumption. Although many traditional scheduling algorithms have been applied in various platforms, they may not work efficiently due to the large number of user requests, the variety of computation resources and complexity of Cloud environment. In this paper, we tackle the task scheduling problem which aims to minimize makespan by Genetic Algorithm (GA. We propose an incremental GA which has adaptive probabilities of crossover and mutation. The mutation and crossover rates change according to generations and also vary between individuals. Large numbers of tasks are randomly generated to simulate various scales of task scheduling problem in Cloud environment. Based on the instance types of Amazon EC2, we implemented virtual machines with different computing capacity on CloudSim. We compared the performance of the adaptive incremental GA with that of Standard GA, Min-Min, Max-Min , Simulated Annealing and Artificial Bee Colony Algorithm in finding the optimal scheme. Experimental results show that the proposed algorithm can achieve feasible solutions which have acceptable makespan with less computation time.

Strain-encoded cardiac MRI as an adjunct for dobutamine stress testing: incremental value to conventional wall motion analysis.

Science.gov (United States)

Korosoglou, Grigorios; Lossnitzer, Dirk; Schellberg, Dieter; Lewien, Antje; Wochele, Angela; Schaeufele, Tim; Neizel, Mirja; Steen, Henning; Giannitsis, Evangelos; Katus, Hugo A; Osman, Nael F

2009-03-01

High-dose dobutamine stress MRI is safe and feasible for the diagnosis of coronary artery disease (CAD) in humans. However, the assessment of cine scans relies on the visual interpretation of regional wall motion, which is subjective. Recently, strain-encoded MRI (SENC) has been proposed for the direct color-coded visualization of myocardial strain. The purpose of our study was to compare the diagnostic value of SENC with that provided by conventional wall motion analysis for the detection of inducible ischemia during dobutamine stress MRI. Stress-induced ischemia was assessed by wall motion analysis and by SENC in 101 patients with suspected or known CAD and in 17 healthy volunteers who underwent dobutamine stress MRI in a clinical 1.5-T scanner. Quantitative coronary angiography deemed as the standard reference for the presence or absence of significant CAD (> or =50% diameter stenosis). On a coronary vessel level, SENC detected inducible ischemia in 86 of 101 versus 71 of 101 diseased coronary vessels (P or =50% stenosis (area under the curve, 0.96; SE, 0.01; 95% CI, 0.94 to 0.98; P<0.001). The direct color-coded visualization of strain on MR images is a useful adjunct for dobutamine stress MRI, which provides incremental value for the detection of CAD compared with conventional wall motion readings on cine images.

Confiabilidade do Teste dos Cinco Dígitos em adultos brasileiros

Directory of Open Access Journals (Sweden)

Maene Cristina Campos

2016-06-01

Full Text Available RESUMO Objetivo O presente estudo analisou a confiabilidade do Teste dos Cinco Dígitos (FDT, um instrumento de avaliação dos processos atencionais baseado no paradigma Stroop. O teste usa números e quantidades para avaliação do efeito de interferência atencional. Métodos Avaliamos 49 adultos brasileiros por meio do FDT. Os participantes realizaram o teste em dois momentos, com aproximadamente duas semanas de intervalo. A confiabilidade do teste foi estimada pela consistência interna (método das metades e pela avaliação da estabilidade teste-reteste (coeficiente de correlação intraclasse e teste de Wilcoxon para amostras repetidas. Resultados O tempo de resposta médio dos participantes apresentou discreta melhora nas etapas mais simples do teste e mais acentuada nas etapas mais complexas. A consistência interna do teste foi superior a 0,9. A estabilidade teste-reteste variou em função da etapa do teste, e todas as correlações foram significativas (p < 0,01 e explicaram entre 60% e 90% da variância encontrada. Conclusão O FDT apresenta evidências robustas de confiabilidade na amostra avaliada. Esse foi o primeiro estudo brasileiro a avaliar essa propriedade pelo método de teste-reteste. Os resultados propiciam melhor aplicabilidade do FDT nos contextos de clínica e pesquisa.

Redesenhando o Mapa Eleitoral do Brasil: uma proposta de reforma política incremental

Directory of Open Access Journals (Sweden)

Octavio Amorim Neto

2011-06-01

Full Text Available Este artigo oferece uma proposta de reforma incremental do sistema eleitoral da Câmara dos Deputados. A natureza incremental da proposta se funda na suposição segundo a qual o sistema político é uma arquitetura complexa e delicada, sendo a possibilidade de piorá-lo com mudanças ambiciosas e intempestivas bem maior do que a de aperfeiçoá-lo. A proposta mantém o sistema de representação proporcional com lista aberta, mas altera duas variáveis-chave, uma vez que reduz a magnitude média das circunscrições eleitorais e estabelece uma regra proporcional de distribuição de cadeiras entre partidos coligados. A operacionalização da reforma leva a um novo desenho do mapa eleitoral do país, com circunscrições eleitorais menores dentro de 12 estados. O artigo também apresenta os resultados de um exercício de simulação feito com base nos dados das eleições de 2006 que recalcula a composição partidária da Câmara dos Deputados a partir das regras aqui preconizadas.This article presents a proposal for an incremental reform of the electoral system of the Chamber of Deputies. The incremental nature of the proposal rests on the assumption that this political system is a complex and delicate architecture, and therefore, abrupt and ambitious changes are more likely to make it worse than to improve it. The proposal advocated here maintains the current system of open-list proportional representation, but it changes two key variables of this electoral system, since it reduces its average district magnitude and establishes a proportional distribution of seats among parties that form electoral coalitions. The way the reform is operationalized leads to a redesign of the electoral map of the country, with smaller districts within 12 states. The article also presents the results of a simulation exercise based on data from the 2006 elections, whereby the party makeup of the Chamber of Deputies is recalculated according to the rules proposed

Between structures and norms : Assessing tax increment financing for the Dutch spatial planning toolkit

NARCIS (Netherlands)

Root, Liz; Van Der Krabben, Erwin; Spit, Tejo

2015-01-01

The aim of the paper is to assess the institutional (mis)fit of tax increment financing for the Dutch spatial planning financial toolkit. By applying an institutionally oriented assessment framework, we analyse the interconnectivity of Dutch municipal finance and spatial planning structures and

Functional data analysis on ground reaction force of military load carriage increment

Science.gov (United States)

Din, Wan Rozita Wan; Rambely, Azmin Sham

2014-06-01

Analysis of ground reaction force on military load carriage is done through functional data analysis (FDA) statistical technique. The main objective of the research is to investigate the effect of 10% load increment and to find the maximum suitable load for the Malaysian military. Ten military soldiers age 31 ± 6.2 years, weigh 71.6 ± 10.4 kg and height of 166.3 ± 5.9 cm carrying different military load range from 0% body weight (BW) up to 40% BW participated in an experiment to gather the GRF and kinematic data using Vicon Motion Analysis System, Kirstler force plates and thirty nine body markers. The analysis is conducted in sagittal, medial lateral and anterior posterior planes. The results show that 10% BW load increment has an effect when heel strike and toe-off for all the three planes analyzed with P-value less than 0.001 at 0.05 significant levels. FDA proves to be one of the best statistical techniques in analyzing the functional data. It has the ability to handle filtering, smoothing and curve aligning according to curve features and points of interest.

Enthalpy increment measurements of NaCrO2 using a high temperature Calvet calorimeter

International Nuclear Information System (INIS)

Iyer, V.S.; Jayanthi, K.; Ramarao, G.A.; Venugopal, V.; Sood, D.D.

1991-01-01

Enthalpy increment measurements on NaCrO 2 (s) were carried out in the temperature range 323 to 839 K using a high temperature Calvet micro calorimeter. The enthalpy increment values were least-squares fitted with temperature with the constraint that (Hdeg T - Hdeg 298 ) at 298.18 K equals zero, and can be given by: (Hdeg T - Hdeg 298 ) J/mol) ± 336 = -23515 + 75.364T(K) + 0.01256T 2 (K) (323 to 839 K). The first differential of the above equation with temperature gives the constant pressure molar heat capacity of NaCrO 2 (s), which is given by: Cdeg p (NaCrO 2 , s, T) (J/K mol) = 75.364 + 0.02512T(K). The thermal properties of NaCrO 2 (s) were calculated using the molar heat capacities from the present study and Sdeg(298 K) from the literature. (orig.)

A Review of Models for Computer-Based Testing. Research Report 2011-12

Science.gov (United States)

Luecht, Richard M.; Sireci, Stephen G.

2011-01-01

Over the past four decades, there has been incremental growth in computer-based testing (CBT) as a viable alternative to paper-and-pencil testing. However, the transition to CBT is neither easy nor inexpensive. As Drasgow, Luecht, and Bennett (2006) noted, many design engineering, test development, operations/logistics, and psychometric changes…

Transferability and accuracy by combining dispersionless density functional and incremental post-Hartree-Fock theories: Noble gases adsorption on coronene/graphene/graphite surfaces

Energy Technology Data Exchange (ETDEWEB)

Lara-Castells, María Pilar de, E-mail: Pilar.deLara.Castells@csic.es; Bartolomei, Massimiliano [Instituto de Física Fundamental (C.S.I.C.), Serrano 123, E-28006 Madrid (Spain); Mitrushchenkov, Alexander O. [Laboratoire Modélisation et Simulation Multi Echelle, Université Paris-Est, MSME UMR 8208 CNRS, 5 bd Descartes, 77454 Marne-la-Vallée (France); Stoll, Hermann [Institut für Theoretische Chemie, Universität Stuttgart, D-70550 Stuttgart (Germany)

2015-11-21

The accuracy and transferability of the electronic structure approach combining dispersionless density functional theory (DFT) [K. Pernal et al., Phys. Rev. Lett. 103, 263201 (2009)] with the method of increments [H. Stoll, J. Chem. Phys. 97, 8449 (1992)], are validated for the interaction between the noble-gas Ne, Ar, Kr, and Xe atoms and coronene/graphene/graphite surfaces. This approach uses the method of increments for surface cluster models to extract intermonomer dispersion-like (2- and 3-body) correlation terms at coupled cluster singles and doubles and perturbative triples level, while periodic dispersionless density functionals calculations are performed to estimate the sum of Hartree-Fock and intramonomer correlation contributions. Dispersion energy contributions are also obtained using DFT-based symmetry-adapted perturbation theory [SAPT(DFT)]. An analysis of the structure of the X/surface (X = Ne, Ar, Kr, and Xe) interaction energies shows the excellent transferability properties of the leading intermonomer correlation contributions across the sequence of noble-gas atoms, which are also discussed using the Drude oscillator model. We further compare these results with van der Waals-(vdW)-corrected DFT-based approaches. As a test of accuracy, the energies of the low-lying nuclear bound states supported by the laterally averaged X/graphite potentials (X = {sup 3}He, {sup 4}He, Ne, Ar, Kr, and Xe) are calculated and compared with the best estimations from experimental measurements and an atom-bond potential model using the ab initio-assisted fine-tuning of semiempirical parameters. The bound-state energies determined differ by less than 6–7 meV (6%) from the atom-bond potential model. The crucial importance of including incremental 3-body dispersion-type terms is clearly demonstrated, showing that the SAPT(DFT) approach effectively account for these terms. With the deviations from the best experimental-based estimations smaller than 2.3 meV (1.9%), the

Complex Physiological Response of Norway Spruce to Atmospheric Pollution – Decreased Carbon Isotope Discrimination and Unchanged Tree Biomass Increment

Science.gov (United States)

Čada, Vojtěch; Šantrůčková, Hana; Šantrůček, Jiří; Kubištová, Lenka; Seedre, Meelis; Svoboda, Miroslav

2016-01-01

Atmospheric pollution critically affects forest ecosystems around the world by directly impacting the assimilation apparatus of trees and indirectly by altering soil conditions, which subsequently also leads to changes in carbon cycling. To evaluate the extent of the physiological effect of moderate level sulfate and reactive nitrogen acidic deposition, we performed a retrospective dendrochronological analysis of several physiological parameters derived from periodic measurements of carbon stable isotope composition (13C discrimination, intercellular CO2 concentration and intrinsic water use efficiency) and annual diameter increments (tree biomass increment, its inter-annual variability and correlation with temperature, cloud cover, precipitation and Palmer drought severity index). The analysis was performed in two mountain Norway spruce (Picea abies) stands of the Bohemian Forest (Czech Republic, central Europe), where moderate levels of pollution peaked in the 1970s and 1980s and no evident impact on tree growth or link to mortality has been reported. The significant influence of pollution on trees was expressed most sensitively by a 1.88‰ reduction of carbon isotope discrimination (Δ13C). The effects of atmospheric pollution interacted with increasing atmospheric CO2 concentration and temperature. As a result, we observed no change in intercellular CO2 concentrations (Ci), an abrupt increase in water use efficiency (iWUE) and no change in biomass increment, which could also partly result from changes in carbon partitioning (e.g., from below- to above-ground). The biomass increment was significantly related to Δ13C on an individual tree level, but the relationship was lost during the pollution period. We suggest that this was caused by a shift from the dominant influence of the photosynthetic rate to stomatal conductance on Δ13C during the pollution period. Using biomass increment-climate correlation analyses, we did not identify any clear pollution

Influence of part orientation on the geometric accuracy in robot-based incremental sheet metal forming

Science.gov (United States)

Störkle, Denis Daniel; Seim, Patrick; Thyssen, Lars; Kuhlenkötter, Bernd

2016-10-01

This article describes new developments in an incremental, robot-based sheet metal forming process (`Roboforming') for the production of sheet metal components for small lot sizes and prototypes. The dieless kinematic-based generation of the shape is implemented by means of two industrial robots, which are interconnected to a cooperating robot system. Compared to other incremental sheet metal forming (ISF) machines, this system offers high geometrical form flexibility without the need of any part-dependent tools. The industrial application of ISF is still limited by certain constraints, e.g. the low geometrical accuracy. Responding to these constraints, the authors present the influence of the part orientation and the forming sequence on the geometric accuracy. Their influence is illustrated with the help of various experimental results shown and interpreted within this article.

Optimization of the single point incremental forming process for titanium sheets by using response surface

Directory of Open Access Journals (Sweden)

Saidi Badreddine

2016-01-01

Full Text Available The single point incremental forming process is well-known to be perfectly suited for prototyping and small series. One of its fields of applicability is the medicine area for the forming of titanium prostheses or titanium medical implants. However this process is not yet very industrialized, mainly due its geometrical inaccuracy, its not homogeneous thickness distribution& Moreover considerable forces can occur. They must be controlled in order to preserve the tooling. In this paper, a numerical approach is proposed in order to minimize the maximum force achieved during the incremental forming of titanium sheets and to maximize the minimal thickness. A surface response methodology is used to find the optimal values of two input parameters of the process, the punch diameter and the vertical step size of the tool path.

Optimization of Surface Roughness and Wall Thickness in Dieless Incremental Forming Of Aluminum Sheet Using Taguchi

Science.gov (United States)

Hamedon, Zamzuri; Kuang, Shea Cheng; Jaafar, Hasnulhadi; Azhari, Azmir

2018-03-01

Incremental sheet forming is a versatile sheet metal forming process where a sheet metal is formed into its final shape by a series of localized deformation without a specialised die. However, it still has many shortcomings that need to be overcome such as geometric accuracy, surface roughness, formability, forming speed, and so on. This project focus on minimising the surface roughness of aluminium sheet and improving its thickness uniformity in incremental sheet forming via optimisation of wall angle, feed rate, and step size. Besides, the effect of wall angle, feed rate, and step size to the surface roughness and thickness uniformity of aluminium sheet was investigated in this project. From the results, it was observed that surface roughness and thickness uniformity were inversely varied due to the formation of surface waviness. Increase in feed rate and decrease in step size will produce a lower surface roughness, while uniform thickness reduction was obtained by reducing the wall angle and step size. By using Taguchi analysis, the optimum parameters for minimum surface roughness and uniform thickness reduction of aluminium sheet were determined. The finding of this project helps to reduce the time in optimising the surface roughness and thickness uniformity in incremental sheet forming.

Robust, Causal, and Incremental Approaches to Investigating Linguistic Adaptation

Science.gov (United States)

Roberts, Seán G.

2018-01-01

This paper discusses the maximum robustness approach for studying cases of adaptation in language. We live in an age where we have more data on more languages than ever before, and more data to link it with from other domains. This should make it easier to test hypotheses involving adaptation, and also to spot new patterns that might be explained by adaptation. However, there is not much discussion of the overall approach to research in this area. There are outstanding questions about how to formalize theories, what the criteria are for directing research and how to integrate results from different methods into a clear assessment of a hypothesis. This paper addresses some of those issues by suggesting an approach which is causal, incremental and robust. It illustrates the approach with reference to a recent claim that dry environments select against the use of precise contrasts in pitch. Study 1 replicates a previous analysis of the link between humidity and lexical tone with an alternative dataset and finds that it is not robust. Study 2 performs an analysis with a continuous measure of tone and finds no significant correlation. Study 3 addresses a more recent analysis of the link between humidity and vowel use and finds that it is robust, though the effect size is small and the robustness of the measurement of vowel use is low. Methodological robustness of the general theory is addressed by suggesting additional approaches including iterated learning, a historical case study, corpus studies, and studying individual speech. PMID:29515487

An Incremental Type-2 Meta-Cognitive Extreme Learning Machine.

Science.gov (United States)

Pratama, Mahardhika; Zhang, Guangquan; Er, Meng Joo; Anavatti, Sreenatha

2017-02-01

Existing extreme learning algorithm have not taken into account four issues: 1) complexity; 2) uncertainty; 3) concept drift; and 4) high dimensionality. A novel incremental type-2 meta-cognitive extreme learning machine (ELM) called evolving type-2 ELM (eT2ELM) is proposed to cope with the four issues in this paper. The eT2ELM presents three main pillars of human meta-cognition: 1) what-to-learn; 2) how-to-learn; and 3) when-to-learn. The what-to-learn component selects important training samples for model updates by virtue of the online certainty-based active learning method, which renders eT2ELM as a semi-supervised classifier. The how-to-learn element develops a synergy between extreme learning theory and the evolving concept, whereby the hidden nodes can be generated and pruned automatically from data streams with no tuning of hidden nodes. The when-to-learn constituent makes use of the standard sample reserved strategy. A generalized interval type-2 fuzzy neural network is also put forward as a cognitive component, in which a hidden node is built upon the interval type-2 multivariate Gaussian function while exploiting a subset of Chebyshev series in the output node. The efficacy of the proposed eT2ELM is numerically validated in 12 data streams containing various concept drifts. The numerical results are confirmed by thorough statistical tests, where the eT2ELM demonstrates the most encouraging numerical results in delivering reliable prediction, while sustaining low complexity.