The DataTAG transatlantic testbed

CERN Document Server

Martin, O; Martin-Flatin, J P; Moroni, P; Nae, D; Newman, H; Ravot, S

2005-01-01

Wide area network testbeds allow researchers and engineers to test out new equipment, protocols and services in real-life situations, without jeopardizing the stability and reliability of production networks. The Data TransAtlantic Grid (DataTAG) testbed, deployed in 2002 between CERN, Geneva, Switzerland and StarLight, Chicago, IL, USA, is probably the largest testbed built to date. Jointly managed by CERN and Caltech, it is funded by the European Commission, the U.S. Department of Energy and the U.S. National Science Foundation. The main objectives of this testbed are to improve the Grid community's understanding of the networking issues posed by data- intensive Grid applications over transoceanic gigabit networks, design and develop new Grid middleware services, and improve the interoperability of European and U.S. Grid applications in High- Energy and Nuclear Physics. In this paper, we give an overview of this testbed, describe its various topologies over time, and summarize the main lessons learned after...

The Living With a Star Space Environment Testbed Payload

Science.gov (United States)

Xapsos, Mike

2015-01-01

This presentation outlines a brief description of the Living With a Star (LWS) Program missions and detailed information about the Space Environment Testbed (SET) payload consisting of a space weather monitor and carrier containing 4 board experiments.

Passive Thermal Design Approach for the Space Communications and Navigation (SCaN) Testbed Experiment on the International Space Station (ISS)

Science.gov (United States)

Siamidis, John; Yuko, Jim

2014-01-01

The Space Communications and Navigation (SCaN) Program Office at NASA Headquarters oversees all of NASAs space communications activities. SCaN manages and directs the ground-based facilities and services provided by the Deep Space Network (DSN), Near Earth Network (NEN), and the Space Network (SN). Through the SCaN Program Office, NASA GRC developed a Software Defined Radio (SDR) testbed experiment (SCaN testbed experiment) for use on the International Space Station (ISS). It is comprised of three different SDR radios, the Jet Propulsion Laboratory (JPL) radio, Harris Corporation radio, and the General Dynamics Corporation radio. The SCaN testbed experiment provides an on-orbit, adaptable, SDR Space Telecommunications Radio System (STRS) - based facility to conduct a suite of experiments to advance the Software Defined Radio, Space Telecommunications Radio Systems (STRS) standards, reduce risk (Technology Readiness Level (TRL) advancement) for candidate Constellation future space flight hardware software, and demonstrate space communication links critical to future NASA exploration missions. The SCaN testbed project provides NASA, industry, other Government agencies, and academic partners the opportunity to develop and field communications, navigation, and networking technologies in the laboratory and space environment based on reconfigurable, software defined radio platforms and the STRS Architecture.The SCaN testbed is resident on the P3 Express Logistics Carrier (ELC) on the exterior truss of the International Space Station (ISS). The SCaN testbed payload launched on the Japanese Aerospace Exploration Agency (JAXA) H-II Transfer Vehicle (HTV) and was installed on the ISS P3 ELC located on the inboard RAM P3 site. The daily operations and testing are managed out of NASA GRC in the Telescience Support Center (TSC).

SSERVI Analog Regolith Simulant Testbed Facility

Science.gov (United States)

Minafra, J.; Schmidt, G. K.

2016-12-01

SSERVI's goals include supporting planetary researchers within NASA, other government agencies; private sector and hardware developers; competitors in focused prize design competitions; and academic sector researchers. The SSERVI Analog Regolith Simulant Testbed provides opportunities for research scientists and engineers to study the effects of regolith analog testbed research in the planetary exploration field. This capability is essential to help to understand the basic effects of continued long-term exposure to a simulated analog test environment. The current facility houses approximately eight tons of JSC-1A lunar regolith simulant in a test bin consisting of a 4 meter by 4 meter area. SSERVI provides a bridge between several groups, joining together researchers from: 1) scientific and exploration communities, 2) multiple disciplines across a wide range of planetary sciences, and 3) domestic and international communities and partnerships. This testbed provides a means of consolidating the tasks of acquisition, storage and safety mitigation in handling large quantities of regolith simulant Facility hardware and environment testing scenarios include, but are not limited to the following; Lunar surface mobility, Dust exposure and mitigation, Regolith handling and excavation, Solar-like illumination, Lunar surface compaction profile, Lofted dust, Mechanical properties of lunar regolith, and Surface features (i.e. grades and rocks) Numerous benefits vary from easy access to a controlled analog regolith simulant testbed, and planetary exploration activities at NASA Research Park, to academia and expanded commercial opportunities in California's Silicon Valley, as well as public outreach and education opportunities.

Mini-mast CSI testbed user's guide

Science.gov (United States)

Tanner, Sharon E.; Pappa, Richard S.; Sulla, Jeffrey L.; Elliott, Kenny B.; Miserentino, Robert; Bailey, James P.; Cooper, Paul A.; Williams, Boyd L., Jr.; Bruner, Anne M.

1992-01-01

The Mini-Mast testbed is a 20 m generic truss highly representative of future deployable trusses for space applications. It is fully instrumented for system identification and active vibrations control experiments and is used as a ground testbed at NASA-Langley. The facility has actuators and feedback sensors linked via fiber optic cables to the Advanced Real Time Simulation (ARTS) system, where user defined control laws are incorporated into generic controls software. The object of the facility is to conduct comprehensive active vibration control experiments on a dynamically realistic large space structure. A primary goal is to understand the practical effects of simplifying theoretical assumptions. This User's Guide describes the hardware and its primary components, the dynamic characteristics of the test article, the control law implementation process, and the necessary safeguards employed to protect the test article. Suggestions for a strawman controls experiment are also included.

Data Distribution Service-Based Interoperability Framework for Smart Grid Testbed Infrastructure

Directory of Open Access Journals (Sweden)

Tarek A. Youssef

2016-03-01

Full Text Available This paper presents the design and implementation of a communication and control infrastructure for smart grid operation. The proposed infrastructure enhances the reliability of the measurements and control network. The advantages of utilizing the data-centric over message-centric communication approach are discussed in the context of smart grid applications. The data distribution service (DDS is used to implement a data-centric common data bus for the smart grid. This common data bus improves the communication reliability, enabling distributed control and smart load management. These enhancements are achieved by avoiding a single point of failure while enabling peer-to-peer communication and an automatic discovery feature for dynamic participating nodes. The infrastructure and ideas presented in this paper were implemented and tested on the smart grid testbed. A toolbox and application programing interface for the testbed infrastructure are developed in order to facilitate interoperability and remote access to the testbed. This interface allows control, monitoring, and performing of experiments remotely. Furthermore, it could be used to integrate multidisciplinary testbeds to study complex cyber-physical systems (CPS.

High Precision Testbed to Evaluate Ethernet Performance for In-Car Networks

DEFF Research Database (Denmark)

Revsbech, Kasper; Madsen, Tatiana Kozlova; Schiøler, Henrik

2012-01-01

Validating safety-critical real-time systems such as in-car networks often involves a model-based performance analysis of the network. An important issue performing such analysis is to provide precise model parameters, matching the actual equipment. One way to obtain such parameters is to derive...... them by measurements of the equipment. In this work we describe the design of a testbed enabling active measurements on up to 1 [Gb=Sec] Copper based Ethernet Switches. By use of the testbed it self, we conduct a series of tests where the precision of the testbed is estimated. We find a maximum error...

Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed

Science.gov (United States)

Volberding, Roy W.; Khan, Siraj M.

1994-10-01

An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.

A remote integrated testbed for cooperating objects

CERN Document Server

Dios, Jose Ramiro Martinez-de; Bernabe, Alberto de San; Ollero, Anibal

2013-01-01

Testbeds are gaining increasing relevance in research domains and also in industrial applications. However, very few books devoted to testbeds have been published. To the best of my knowledge no book on this topic has been published. This book is particularly interesting for the growing community of testbed developers. I believe the book is also very interesting for researchers in robot-WSN cooperation.This book provides detailed description of a system that can be considered the first testbed that allows full peer-to-peer interoperability between heterogeneous robots and ubiquitous systems su

Embedded Sensors and Controls to Improve Component Performance and Reliability -- Loop-scale Testbed Design Report

Energy Technology Data Exchange (ETDEWEB)

Melin, Alexander M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-09-01

Embedded instrumentation and control systems that can operate in extreme environments are challenging to design and operate. Extreme environments limit the options for sensors and actuators and degrade their performance. Because sensors and actuators are necessary for feedback control, these limitations mean that designing embedded instrumentation and control systems for the challenging environments of nuclear reactors requires advanced technical solutions that are not available commercially. This report details the development of testbed that will be used for cross-cutting embedded instrumentation and control research for nuclear power applications. This research is funded by the Department of Energy's Nuclear Energy Enabling Technology program's Advanced Sensors and Instrumentation topic. The design goal of the loop-scale testbed is to build a low temperature pump that utilizes magnetic bearing that will be incorporated into a water loop to test control system performance and self-sensing techniques. Specifically, this testbed will be used to analyze control system performance in response to nonlinear and cross-coupling fluid effects between the shaft axes of motion, rotordynamics and gyroscopic effects, and impeller disturbances. This testbed will also be used to characterize the performance losses when using self-sensing position measurement techniques. Active magnetic bearings are a technology that can reduce failures and maintenance costs in nuclear power plants. They are particularly relevant to liquid salt reactors that operate at high temperatures (700 C). Pumps used in the extreme environment of liquid salt reactors provide many engineering challenges that can be overcome with magnetic bearings and their associated embedded instrumentation and control. This report will give details of the mechanical design and electromagnetic design of the loop-scale embedded instrumentation and control testbed.

Autonomous power expert fault diagnostic system for Space Station Freedom electrical power system testbed

Science.gov (United States)

Truong, Long V.; Walters, Jerry L.; Roth, Mary Ellen; Quinn, Todd M.; Krawczonek, Walter M.

1990-01-01

The goal of the Autonomous Power System (APS) program is to develop and apply intelligent problem solving and control to the Space Station Freedom Electrical Power System (SSF/EPS) testbed being developed and demonstrated at NASA Lewis Research Center. The objectives of the program are to establish artificial intelligence technology paths, to craft knowledge-based tools with advanced human-operator interfaces for power systems, and to interface and integrate knowledge-based systems with conventional controllers. The Autonomous Power EXpert (APEX) portion of the APS program will integrate a knowledge-based fault diagnostic system and a power resource planner-scheduler. Then APEX will interface on-line with the SSF/EPS testbed and its Power Management Controller (PMC). The key tasks include establishing knowledge bases for system diagnostics, fault detection and isolation analysis, on-line information accessing through PMC, enhanced data management, and multiple-level, object-oriented operator displays. The first prototype of the diagnostic expert system for fault detection and isolation has been developed. The knowledge bases and the rule-based model that were developed for the Power Distribution Control Unit subsystem of the SSF/EPS testbed are described. A corresponding troubleshooting technique is also described.

Space Station technology testbed: 2010 deep space transport

Science.gov (United States)

Holt, Alan C.

1993-01-01

A space station in a crew-tended or permanently crewed configuration will provide major R&D opportunities for innovative, technology and materials development and advanced space systems testing. A space station should be designed with the basic infrastructure elements required to grow into a major systems technology testbed. This space-based technology testbed can and should be used to support the development of technologies required to expand our utilization of near-Earth space, the Moon and the Earth-to-Jupiter region of the Solar System. Space station support of advanced technology and materials development will result in new techniques for high priority scientific research and the knowledge and R&D base needed for the development of major, new commercial product thrusts. To illustrate the technology testbed potential of a space station and to point the way to a bold, innovative approach to advanced space systems' development, a hypothetical deep space transport development and test plan is described. Key deep space transport R&D activities are described would lead to the readiness certification of an advanced, reusable interplanetary transport capable of supporting eight crewmembers or more. With the support of a focused and highly motivated, multi-agency ground R&D program, a deep space transport of this type could be assembled and tested by 2010. Key R&D activities on a space station would include: (1) experimental research investigating the microgravity assisted, restructuring of micro-engineered, materials (to develop and verify the in-space and in-situ 'tuning' of materials for use in debris and radiation shielding and other protective systems), (2) exposure of microengineered materials to the space environment for passive and operational performance tests (to develop in-situ maintenance and repair techniques and to support the development, enhancement, and implementation of protective systems, data and bio-processing systems, and virtual reality and

SSERVI Analog Regolith Simulant Testbed Facility

Science.gov (United States)

Minafra, Joseph; Schmidt, Gregory; Bailey, Brad; Gibbs, Kristina

2016-10-01

The Solar System Exploration Research Virtual Institute (SSERVI) at NASA's Ames Research Center in California's Silicon Valley was founded in 2013 to act as a virtual institute that provides interdisciplinary research centered on the goals of its supporting directorates: NASA Science Mission Directorate (SMD) and the Human Exploration & Operations Mission Directorate (HEOMD).Primary research goals of the Institute revolve around the integration of science and exploration to gain knowledge required for the future of human space exploration beyond low Earth orbit. SSERVI intends to leverage existing JSC1A regolith simulant resources into the creation of a regolith simulant testbed facility. The purpose of this testbed concept is to provide the planetary exploration community with a readily available capability to test hardware and conduct research in a large simulant environment.SSERVI's goals include supporting planetary researchers within NASA, other government agencies; private sector and hardware developers; competitors in focused prize design competitions; and academic sector researchers.SSERVI provides opportunities for research scientists and engineers to study the effects of regolith analog testbed research in the planetary exploration field. This capability is essential to help to understand the basic effects of continued long-term exposure to a simulated analog test environment.The current facility houses approximately eight tons of JSC-1A lunar regolith simulant in a test bin consisting of a 4 meter by 4 meter area, including dust mitigation and safety oversight.Facility hardware and environment testing scenarios could include, Lunar surface mobility, Dust exposure and mitigation, Regolith handling and excavation, Solar-like illumination, Lunar surface compaction profile, Lofted dust, Mechanical properties of lunar regolith, Surface features (i.e. grades and rocks)Numerous benefits vary from easy access to a controlled analog regolith simulant testbed, and

An adaptable, low cost test-bed for unmanned vehicle systems research

Science.gov (United States)

Goppert, James M.

2011-12-01

An unmanned vehicle systems test-bed has been developed. The test-bed has been designed to accommodate hardware changes and various vehicle types and algorithms. The creation of this test-bed allows research teams to focus on algorithm development and employ a common well-tested experimental framework. The ArduPilotOne autopilot was developed to provide the necessary level of abstraction for multiple vehicle types. The autopilot was also designed to be highly integrated with the Mavlink protocol for Micro Air Vehicle (MAV) communication. Mavlink is the native protocol for QGroundControl, a MAV ground control program. Features were added to QGroundControl to accommodate outdoor usage. Next, the Mavsim toolbox was developed for Scicoslab to allow hardware-in-the-loop testing, control design and analysis, and estimation algorithm testing and verification. In order to obtain linear models of aircraft dynamics, the JSBSim flight dynamics engine was extended to use a probabilistic Nelder-Mead simplex method. The JSBSim aircraft dynamics were compared with wind-tunnel data collected. Finally, a structured methodology for successive loop closure control design is proposed. This methodology is demonstrated along with the rest of the test-bed tools on a quadrotor, a fixed wing RC plane, and a ground vehicle. Test results for the ground vehicle are presented.

NBodyLab: A Testbed for Undergraduates Utilizing a Web Interface to NEMO and MD-GRAPE2 Hardware

Science.gov (United States)

Johnson, V. L.; Teuben, P. J.; Penprase, B. E.

An N-body simulation testbed called NBodyLab was developed at Pomona College as a teaching tool for undergraduates. The testbed runs under Linux and provides a web interface to selected back-end NEMO modeling and analysis tools, and several integration methods which can optionally use an MD-GRAPE2 supercomputer card in the server to accelerate calculation of particle-particle forces. The testbed provides a framework for using and experimenting with the main components of N-body simulations: data models and transformations, numerical integration of the equations of motion, analysis and visualization products, and acceleration techniques (in this case, special purpose hardware). The testbed can be used by students with no knowledge of programming or Unix, freeing such students and their instructor to spend more time on scientific experimentation. The advanced student can extend the testbed software and/or more quickly transition to the use of more advanced Unix-based toolsets such as NEMO, Starlab and model builders such as GalactICS. Cosmology students at Pomona College used the testbed to study collisions of galaxies with different speeds, masses, densities, collision angles, angular momentum, etc., attempting to simulate, for example, the Tadpole Galaxy and the Antenna Galaxies. The testbed framework is available as open-source to assist other researchers and educators. Recommendations are made for testbed enhancements.

Graphical interface between the CIRSSE testbed and CimStation software with MCS/CTOS

Science.gov (United States)

Hron, Anna B.

1992-01-01

This research is concerned with developing a graphical simulation of the testbed at the Center for Intelligent Robotic Systems for Space Exploration (CIRSSE) and the interface which allows for communication between the two. Such an interface is useful in telerobotic operations, and as a functional interaction tool for testbed users. Creating a simulated model of a real world system, generates inevitable calibration discrepancies between them. This thesis gives a brief overview of the work done to date in the area of workcell representation and communication, describes the development of the CIRSSE interface, and gives a direction for future work in the area of system calibration. The CimStation software used for development of this interface, is a highly versatile robotic workcell simulation package which has been programmed for this application with a scale graphical model of the testbed, and supporting interface menu code. A need for this tool has been identified for the reasons of path previewing, as a window on teleoperation and for calibration of simulated vs. real world models. The interface allows information (i.e., joint angles) generated by CimStation to be sent as motion goal positions to the testbed robots. An option of the interface has been established such that joint angle information generated by supporting testbed algorithms (i.e., TG, collision avoidance) can be piped through CimStation as a visual preview of the path.

Virtual Factory Testbed

Data.gov (United States)

Federal Laboratory Consortium — The Virtual Factory Testbed (VFT) is comprised of three physical facilities linked by a standalone network (VFNet). The three facilities are the Smart and Wireless...

Development of a space-systems network testbed

Science.gov (United States)

Lala, Jaynarayan; Alger, Linda; Adams, Stuart; Burkhardt, Laura; Nagle, Gail; Murray, Nicholas

1988-01-01

This paper describes a communications network testbed which has been designed to allow the development of architectures and algorithms that meet the functional requirements of future NASA communication systems. The central hardware components of the Network Testbed are programmable circuit switching communication nodes which can be adapted by software or firmware changes to customize the testbed to particular architectures and algorithms. Fault detection, isolation, and reconfiguration has been implemented in the Network with a hybrid approach which utilizes features of both centralized and distributed techniques to provide efficient handling of faults within the Network.

Carrier Plus: A sensor payload for Living With a Star Space Environment Testbed (LWS/SET)

Science.gov (United States)

Marshall, Cheryl J.; Moss, Steven; Howard, Regan; LaBel, Kenneth A.; Grycewicz, Tom; Barth, Janet L.; Brewer, Dana

2003-01-01

The Defense Threat Reduction Agency (DTR4) and National Aeronautics and Space Administration (NASA) Goddard Space Flight Center are collaborating to develop the Carrier Plus sensor experiment platform as a capability of the Space Environments Testbed (SET). The Space Environment Testbed (SET) provides flight opportunities for technology experiments as part of NASA's Living With a Star (LWS) program. The Carrier Plus will provide new capability to characterize sensor technologies such as state-of-the-art visible focal plane arrays (FPAs) in a natural space radiation environment. The technical objectives include on-orbit validation of recently developed FPA technologies and performance prediction methodologies, as well as characterization of the FPA radiation response to total ionizing dose damage, displacement damage and transients. It is expected that the sensor experiment will carry 4-6 FPAs and associated radiation correlative environment monitors (CEMs) for a 2006-2007 launch. Sensor technology candidates may include n- and p-charge coupled devices (CCDs), active pixel sensors (APS), and hybrid CMOS arrays. The presentation will describe the Carrier Plus goals and objectives, as well as provide details about the architecture and design. More information on the LWS program can be found at http://lws.gsfc.nasa.gov/. Business announcements for LWS/SET and program briefings are posted at http://lws-set.gsfc.nasa.gov

Operation Duties on the F-15B Research Testbed

Science.gov (United States)

Truong, Samson S.

2010-01-01

This presentation entails what I have done this past summer for my Co-op tour in the Operations Engineering Branch. Activities included supporting the F-15B Research Testbed, supporting the incoming F-15D models, design work, and other operations engineering duties.

INFN Tier-1 Testbed Facility

International Nuclear Information System (INIS)

Gregori, Daniele; Cavalli, Alessandro; Dell'Agnello, Luca; Dal Pra, Stefano; Prosperini, Andrea; Ricci, Pierpaolo; Ronchieri, Elisabetta; Sapunenko, Vladimir

2012-01-01

INFN-CNAF, located in Bologna, is the Information Technology Center of National Institute of Nuclear Physics (INFN). In the framework of the Worldwide LHC Computing Grid, INFN-CNAF is one of the eleven worldwide Tier-1 centers to store and reprocessing Large Hadron Collider (LHC) data. The Italian Tier-1 provides the resources of storage (i.e., disk space for short term needs and tapes for long term needs) and computing power that are needed for data processing and analysis to the LHC scientific community. Furthermore, INFN Tier-1 houses computing resources for other particle physics experiments, like CDF at Fermilab, SuperB at Frascati, as well as for astro particle and spatial physics experiments. The computing center is a very complex infrastructure, the hardaware layer include the network, storage and farming area, while the software layer includes open source and proprietary software. Software updating and new hardware adding can unexpectedly deteriorate the production activity of the center: therefore a testbed facility has been set up in order to reproduce and certify the various layers of the Tier-1. In this article we describe the testbed and the checks performed.

The Living With a Star Space Environment Testbed Experiments

Science.gov (United States)

Xapsos, Michael A.

2014-01-01

The focus of the Living With a Star (LWS) Space Environment Testbed (SET) program is to improve the performance of hardware in the space radiation environment. The program has developed a payload for the Air Force Research Laboratory (AFRL) Demonstration and Science Experiments (DSX) spacecraft that is scheduled for launch in August 2015 on the SpaceX Falcon Heavy rocket. The primary structure of DSX is an Evolved Expendable Launch Vehicle (EELV) Secondary Payload Adapter (ESPA) ring. DSX will be in a Medium Earth Orbit (MEO). This oral presentation will describe the SET payload.

The Objectives of NASA's Living with a Star Space Environment Testbed

Science.gov (United States)

Barth, Janet L.; LaBel, Kenneth A.; Brewer, Dana; Kauffman, Billy; Howard, Regan; Griffin, Geoff; Day, John H. (Technical Monitor)

2001-01-01

NASA is planning to fly a series of Space Environment Testbeds (SET) as part of the Living With A Star (LWS) Program. The goal of the testbeds is to improve and develop capabilities to mitigate and/or accommodate the affects of solar variability in spacecraft and avionics design and operation. This will be accomplished by performing technology validation in space to enable routine operations, characterize technology performance in space, and improve and develop models, guidelines and databases. The anticipated result of the LWS/SET program is improved spacecraft performance, design, and operation for survival of the radiation, spacecraft charging, meteoroid, orbital debris and thermosphere/ionosphere environments. The program calls for a series of NASA Research Announcements (NRAs) to be issued to solicit flight validation experiments, improvement in environment effects models and guidelines, and collateral environment measurements. The selected flight experiments may fly on the SET experiment carriers and flights of opportunity on other commercial and technology missions. This paper presents the status of the project so far, including a description of the types of experiments that are intended to fly on SET-1 and a description of the SET-1 carrier parameters.

The design and implementation of the LLNL gigabit testbed

Energy Technology Data Exchange (ETDEWEB)

Garcia, D. [Lawrence Livermore National Labs., CA (United States)

1994-12-01

This paper will look at the design and implementation of the LLNL Gigabit testbed (LGTB), where various high speed networking products, can be tested in one environment. The paper will discuss the philosophy behind the design of and the need for the testbed, the tests that are performed in the testbed, and the tools used to implement those tests.

Advanced Artificial Intelligence Technology Testbed

Science.gov (United States)

Anken, Craig S.

1993-01-01

The Advanced Artificial Intelligence Technology Testbed (AAITT) is a laboratory testbed for the design, analysis, integration, evaluation, and exercising of large-scale, complex, software systems, composed of both knowledge-based and conventional components. The AAITT assists its users in the following ways: configuring various problem-solving application suites; observing and measuring the behavior of these applications and the interactions between their constituent modules; gathering and analyzing statistics about the occurrence of key events; and flexibly and quickly altering the interaction of modules within the applications for further study.

Optical Network Testbeds Workshop

Energy Technology Data Exchange (ETDEWEB)

Joe Mambretti

2007-06-01

technologies. Several years ago, when many of these optical networking research topics were first being investigated, they were the subject of controversial debate. The new techniques challenged many long-held concepts related to architecture and technology. However, today all major networking organizations are transitioning toward infrastructure that incorporates these new concepts. This progress has been assisted through the series of Optical Networking Testbed Workshops (ONT). The first (ONT1) outlined a general framework of key issues and topics and developed a series of recommendations (www.nren.nasa.gov/workshop7). The second (ONT2) developed a common vision of optical network technologies, services, infrastructure, and organizations (www.nren.nasa.gov/workshop8). Processes that allow for a common vision encourage widespread deployment of these types of resources among advanced networking communities. Also, such a shared vision enables key concepts and technologies to migrate from basic research testbeds to wider networking communities. The ONT-3 workshop built on these earlier activities by expanding discussion to include additional considerations of the international interoperability and of greater impact of optical networking technology on networking in general. In accordance with this recognition, the workshop confirmed that future-oriented research and development is indispensable to fundamentally change the current Internet architecture to create a global network incorporating completely new concepts. The workshop also recognized that the first priority to allow for this progress is basic research and development, including international collaborative activities, which are important for the global realization of interoperability of a new generation architecture.

Closing the contrast gap between testbed and model prediction with WFIRST-CGI shaped pupil coronagraph

Science.gov (United States)

Zhou, Hanying; Nemati, Bijan; Krist, John; Cady, Eric; Prada, Camilo M.; Kern, Brian; Poberezhskiy, Ilya

2016-07-01

JPL has recently passed an important milestone in its technology development for a proposed NASA WFIRST mission coronagraph: demonstration of better than 1x10-8 contrast over broad bandwidth (10%) on both shaped pupil coronagraph (SPC) and hybrid Lyot coronagraph (HLC) testbeds with the WFIRST obscuration pattern. Challenges remain, however, in the technology readiness for the proposed mission. One is the discrepancies between the achieved contrasts on the testbeds and their corresponding model predictions. A series of testbed diagnoses and modeling activities were planned and carried out on the SPC testbed in order to close the gap. A very useful tool we developed was a derived "measured" testbed wavefront control Jacobian matrix that could be compared with the model-predicted "control" version that was used to generate the high contrast dark hole region in the image plane. The difference between these two is an estimate of the error in the control Jacobian. When the control matrix, which includes both amplitude and phase, was modified to reproduce the error, the simulated performance closely matched the SPC testbed behavior in both contrast floor and contrast convergence speed. This is a step closer toward model validation for high contrast coronagraphs. Further Jacobian analysis and modeling provided clues to the possible sources for the mismatch: DM misregistration and testbed optical wavefront error (WFE) and the deformable mirror (DM) setting for correcting this WFE. These analyses suggested that a high contrast coronagraph has a tight tolerance in the accuracy of its control Jacobian. Modifications to both testbed control model as well as prediction model are being implemented, and future works are discussed.

Exploration Systems Health Management Facilities and Testbed Workshop

Science.gov (United States)

Wilson, Scott; Waterman, Robert; McCleskey, Carey

2004-01-01

Presentation Agenda : (1) Technology Maturation Pipeline (The Plan) (2) Cryogenic testbed (and other KSC Labs) (2a) Component / Subsystem technologies (3) Advanced Technology Development Center (ATDC) (3a) System / Vehic1e technologies (4) EL V Flight Experiments (Flight Testbeds).

A Matlab-Based Testbed for Integration, Evaluation and Comparison of Heterogeneous Stereo Vision Matching Algorithms

Directory of Open Access Journals (Sweden)

Raul Correal

2016-11-01

Full Text Available Stereo matching is a heavily researched area with a prolific published literature and a broad spectrum of heterogeneous algorithms available in diverse programming languages. This paper presents a Matlab-based testbed that aims to centralize and standardize this variety of both current and prospective stereo matching approaches. The proposed testbed aims to facilitate the application of stereo-based methods to real situations. It allows for configuring and executing algorithms, as well as comparing results, in a fast, easy and friendly setting. Algorithms can be combined so that a series of processes can be chained and executed consecutively, using the output of a process as input for the next; some additional filtering and image processing techniques have been included within the testbed for this purpose. A use case is included to illustrate how these processes are sequenced and its effect on the results for real applications. The testbed has been conceived as a collaborative and incremental open-source project, where its code is accessible and modifiable, with the objective of receiving contributions and releasing future versions to include new algorithms and features. It is currently available online for the research community.

Environmental assessment for the Atmospheric Radiation Measurement (ARM) Program: Southern Great Plains Cloud and Radiation Testbed (CART) site

International Nuclear Information System (INIS)

Policastro, A.J.; Pfingston, J.M.; Maloney, D.M.; Wasmer, F.; Pentecost, E.D.

1992-03-01

The Atmospheric Radiation Measurement (ARM) Program is aimed at supplying improved predictive capability of climate change, particularly the prediction of cloud-climate feedback. The objective will be achieved by measuring the atmospheric radiation and physical and meteorological quantities that control solar radiation in the earth's atmosphere and using this information to test global climate and related models. The proposed action is to construct and operate a Cloud and Radiation Testbed (CART) research site in the southern Great Plains as part of the Department of Energy's Atmospheric Radiation Measurement Program whose objective is to develop an improved predictive capability of global climate change. The purpose of this CART research site in southern Kansas and northern Oklahoma would be to collect meteorological and other scientific information to better characterize the processes controlling radiation transfer on a global scale. Impacts which could result from this facility are described

Environmental assessment for the Atmospheric Radiation Measurement (ARM) Program: Southern Great Plains Cloud and Radiation Testbed (CART) site

Energy Technology Data Exchange (ETDEWEB)

Policastro, A.J.; Pfingston, J.M.; Maloney, D.M.; Wasmer, F.; Pentecost, E.D.

1992-03-01

The Atmospheric Radiation Measurement (ARM) Program is aimed at supplying improved predictive capability of climate change, particularly the prediction of cloud-climate feedback. The objective will be achieved by measuring the atmospheric radiation and physical and meteorological quantities that control solar radiation in the earth`s atmosphere and using this information to test global climate and related models. The proposed action is to construct and operate a Cloud and Radiation Testbed (CART) research site in the southern Great Plains as part of the Department of Energy`s Atmospheric Radiation Measurement Program whose objective is to develop an improved predictive capability of global climate change. The purpose of this CART research site in southern Kansas and northern Oklahoma would be to collect meteorological and other scientific information to better characterize the processes controlling radiation transfer on a global scale. Impacts which could result from this facility are described.

Nuclear Instrumentation and Control Cyber Testbed Considerations – Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

Jonathan Gray; Robert Anderson; Julio G. Rodriguez; Cheol-Kwon Lee

2014-08-01

Abstract: Identifying and understanding digital instrumentation and control (I&C) cyber vulnerabilities within nuclear power plants and other nuclear facilities, is critical if nation states desire to operate nuclear facilities safely, reliably, and securely. In order to demonstrate objective evidence that cyber vulnerabilities have been adequately identified and mitigated, a testbed representing a facility’s critical nuclear equipment must be replicated. Idaho National Laboratory (INL) has built and operated similar testbeds for common critical infrastructure I&C for over ten years. This experience developing, operating, and maintaining an I&C testbed in support of research identifying cyber vulnerabilities has led the Korean Atomic Energy Research Institute of the Republic of Korea to solicit the experiences of INL to help mitigate problems early in the design, development, operation, and maintenance of a similar testbed. The following information will discuss I&C testbed lessons learned and the impact of these experiences to KAERI.

COLUMBUS as Engineering Testbed for Communications and Multimedia Equipment

Science.gov (United States)

Bank, C.; Anspach von Broecker, G. O.; Kolloge, H.-G.; Richters, M.; Rauer, D.; Urban, G.; Canovai, G.; Oesterle, E.

2002-01-01

The paper presents ongoing activities to prepare COLUMBUS for communications and multimedia technology experiments. For this purpose, Astrium SI, Bremen, has studied several options how to best combine the given system architecture with flexible and state-of-the-art interface avionics and software. These activities have been conducted in coordination with, and partially under contract of, DLR and ESA/ESTEC. Moreover, Astrium SI has realized three testbeds for multimedia software and hardware testing under own funding. The experimental core avionics unit - about a half double rack - establishes the core of a new multi-user experiment facility for this type of investigation onboard COLUMBUS, which shall be available to all users of COLUMBUS. It allows for the connection of 2nd generation payload, that is payload requiring broadband data transfer and near-real-time access by the Principal Investigator on ground, to test highly interactive and near-realtime payload operation. The facility is also foreseen to test new equipment to provide the astronauts onboard the ISS/COLUMBUS with bi- directional hi-fi voice and video connectivity to ground, private voice coms and e-mail, and a multimedia workstation for ops training and recreation. Connection to an appropriate Wide Area Network (WAN) on Earth is possible. The facility will include a broadband data transmission front-end terminal, which is mounted externally on the COLUMBUS module. This Equipment provides high flexibility due to the complete transparent transmit and receive chains, the steerable multi-frequency antenna system and its own thermal and power control and distribution. The Equipment is monitored and controlled via the COLUMBUS internal facility. It combines several new hardware items, which are newly developed for the next generation of broadband communication satellites and operates in Ka -Band with the experimental ESA data relay satellite ARTEMIS. The equipment is also TDRSS compatible; the open loop

The Segmented Aperture Interferometric Nulling Testbed (SAINT) I: overview and air-side system description

Science.gov (United States)

Hicks, Brian A.; Lyon, Richard G.; Petrone, Peter; Ballard, Marlin; Bolcar, Matthew R.; Bolognese, Jeff; Clampin, Mark; Dogoda, Peter; Dworzanski, Daniel; Helmbrecht, Michael A.; Koca, Corina; Shiri, Ron

2016-07-01

This work presents an overview of the Segmented Aperture Interferometric Nulling Testbed (SAINT), a project that will pair an actively-controlled macro-scale segmented mirror with the Visible Nulling Coronagraph (VNC). SAINT will incorporate the VNC's demonstrated wavefront sensing and control system to refine and quantify end-to-end high-contrast starlight suppression performance. This pathfinder testbed will be used as a tool to study and refine approaches to mitigating instabilities and complex diffraction expected from future large segmented aperture telescopes.

Dr. Tulga Ersal at NSF Workshop Accessible Remote Testbeds ART'15

Science.gov (United States)

Event Archives Dr. Tulga Ersal at NSF Workshop Accessible Remote Testbeds ART'15 On November 12th, Dr Workshop on Accessible Remote Testbeds (ART'15) at Georgia Tech. From the event website: The rationale behind the ART'15 workshop is that remote-access testbeds could, if done right, significantly change how

A testbed to explore the optimal electrical stimulation parameters for suppressing inter-ictal spikes in human hippocampal slices.

Science.gov (United States)

Min-Chi Hsiao; Pen-Ning Yu; Dong Song; Liu, Charles Y; Heck, Christi N; Millett, David; Berger, Theodore W

2014-01-01

New interventions using neuromodulatory devices such as vagus nerve stimulation, deep brain stimulation and responsive neurostimulation are available or under study for the treatment of refractory epilepsy. Since the actual mechanisms of the onset and termination of the seizure are still unclear, most researchers or clinicians determine the optimal stimulation parameters through trial-and-error procedures. It is necessary to further explore what types of electrical stimulation parameters (these may include stimulation frequency, amplitude, duration, interval pattern, and location) constitute a set of optimal stimulation paradigms to suppress seizures. In a previous study, we developed an in vitro epilepsy model using hippocampal slices from patients suffering from mesial temporal lobe epilepsy. Using a planar multi-electrode array system, inter-ictal activity from human hippocampal slices was consistently recorded. In this study, we have further transferred this in vitro seizure model to a testbed for exploring the possible neurostimulation paradigms to inhibit inter-ictal spikes. The methodology used to collect the electrophysiological data, the approach to apply different electrical stimulation parameters to the slices are provided in this paper. The results show that this experimental testbed will provide a platform for testing the optimal stimulation parameters of seizure cessation. We expect this testbed will expedite the process for identifying the most effective parameters, and may ultimately be used to guide programming of new stimulating paradigms for neuromodulatory devices.

Implementation of standard testbeds for numerical relativity

Energy Technology Data Exchange (ETDEWEB)

Babiuc, M C [Department of Physics and Physical Science, Marshall University, Huntington, WV 25755 (United States); Husa, S [Friedrich Schiller University Jena, Max-Wien-Platz 1, 07743 Jena (Germany); Alic, D [Department of Physics, University of the Balearic Islands, Cra Valldemossa km 7.5, 07122 Palma de Mallorca (Spain); Hinder, I [Center for Gravitational Wave Physics, Pennsylvania State University, University Park, PA 16802 (United States); Lechner, C [Weierstrass Institute for Applied Analysis and Stochastics (WIAS), Mohrenstrasse 39, 10117 Berlin (Germany); Schnetter, E [Center for Computation and Technology, 216 Johnston Hall, Louisiana State University, Baton Rouge, LA 70803 (United States); Szilagyi, B; Dorband, N; Pollney, D; Winicour, J [Max-Planck-Institut fuer Gravitationsphysik (Albert-Einstein-Institut), Am Muehlenberg 1, 14076 Golm (Germany); Zlochower, Y [Center for Computational Relativity and Gravitation, School of Mathematical Sciences, Rochester Institute of Technology, 78 Lomb Memorial Drive, Rochester, New York 14623 (United States)

2008-06-21

We discuss results that have been obtained from the implementation of the initial round of testbeds for numerical relativity which was proposed in the first paper of the Apples with Apples Alliance. We present benchmark results for various codes which provide templates for analyzing the testbeds and to draw conclusions about various features of the codes. This allows us to sharpen the initial test specifications, design a new test and add theoretical insight.

Recent Successes and Future Plans for NASA's Space Communications and Navigation Testbed on the International Space Station

Science.gov (United States)

Reinhart, Richard C.; Sankovic, John M.; Johnson, Sandra K.; Lux, James P.; Chelmins, David T.

2014-01-01

Flexible and extensible space communications architectures and technology are essential to enable future space exploration and science activities. NASA has championed the development of the Space Telecommunications Radio System (STRS) software defined radio (SDR) standard and the application of SDR technology to reduce the costs and risks of using SDRs for space missions, and has developed an on-orbit testbed to validate these capabilities. The Space Communications and Navigation (SCaN) Testbed (previously known as the Communications, Navigation, and Networking reConfigurable Testbed (CoNNeCT)) is advancing SDR, on-board networking, and navigation technologies by conducting space experiments aboard the International Space Station. During its first year(s) on-orbit, the SCaN Testbed has achieved considerable accomplishments to better understand SDRs and their applications. The SDR platforms and software waveforms on each SDR have over 1500 hours of operation and are performing as designed. The Ka-band SDR on the SCaN Testbed is NASAs first space Ka-band transceiver and is NASA's first Ka-band mission using the Space Network. This has provided exciting opportunities to operate at Ka-band and assist with on-orbit tests of NASA newest Tracking and Data Relay Satellites (TDRS). During its first year, SCaN Testbed completed its first on-orbit SDR reconfigurations. SDR reconfigurations occur when implementing new waveforms on an SDR. SDR reconfigurations allow a radio to change minor parameters, such as data rate, or complete functionality. New waveforms which provide new capability and are reusable across different missions provide long term value for reconfigurable platforms such as SDRs. The STRS Standard provides guidelines for new waveform development by third parties. Waveform development by organizations other than the platform provider offers NASA the ability to develop waveforms itself and reduce its dependence and costs on the platform developer. Each of these

A Novel UAV Electric Propulsion Testbed for Diagnostics and Prognostics

Science.gov (United States)

Gorospe, George E., Jr.; Kulkarni, Chetan S.

2017-01-01

This paper presents a novel hardware-in-the-loop (HIL) testbed for systems level diagnostics and prognostics of an electric propulsion system used in UAVs (unmanned aerial vehicle). Referencing the all electric, Edge 540T aircraft used in science and research by NASA Langley Flight Research Center, the HIL testbed includes an identical propulsion system, consisting of motors, speed controllers and batteries. Isolated under a controlled laboratory environment, the propulsion system has been instrumented for advanced diagnostics and prognostics. To produce flight like loading on the system a slave motor is coupled to the motor under test (MUT) and provides variable mechanical resistance, and the capability of introducing nondestructive mechanical wear-like frictional loads on the system. This testbed enables the verification of mathematical models of each component of the propulsion system, the repeatable generation of flight-like loads on the system for fault analysis, test-to-failure scenarios, and the development of advanced system level diagnostics and prognostics methods. The capabilities of the testbed are extended through the integration of a LabVIEW-based client for the Live Virtual Constructive Distributed Environment (LVCDC) Gateway which enables both the publishing of generated data for remotely located observers and prognosers and the synchronization the testbed propulsion system with vehicles in the air. The developed HIL testbed gives researchers easy access to a scientifically relevant portion of the aircraft without the overhead and dangers encountered during actual flight.

Smart Antenna UKM Testbed for Digital Beamforming System

Directory of Open Access Journals (Sweden)

2009-03-01

Full Text Available A new design of smart antenna testbed developed at UKM for digital beamforming purpose is proposed. The smart antenna UKM testbed developed based on modular design employing two novel designs of L-probe fed inverted hybrid E-H (LIEH array antenna and software reconfigurable digital beamforming system (DBS. The antenna is developed based on using the novel LIEH microstrip patch element design arranged into 4×1 uniform linear array antenna. An interface board is designed to interface to the ADC board with the RF front-end receiver. The modular concept of the system provides the capability to test the antenna hardware, beamforming unit, and beamforming algorithm in an independent manner, thus allowing the smart antenna system to be developed and tested in parallel, hence reduces the design time. The DBS was developed using a high-performance TMS320C6711TM floating-point DSP board and a 4-channel RF front-end receiver developed in-house. An interface board is designed to interface to the ADC board with the RF front-end receiver. A four-element receiving array testbed at 1.88–2.22 GHz frequency is constructed, and digital beamforming on this testbed is successfully demonstrated.

Development of a Tethered Formation Flight Testbed for ISS, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The development of a testbed for the development and demonstration of technologies needed by tethered formation flying satellites is proposed. Such a testbed would...

Wavefront control performance modeling with WFIRST shaped pupil coronagraph testbed

Science.gov (United States)

Zhou, Hanying; Nemati, Bijian; Krist, John; Cady, Eric; Kern, Brian; Poberezhskiy, Ilya

2017-09-01

NASA's WFIRST mission includes a coronagraph instrument (CGI) for direct imaging of exoplanets. Significant improvement in CGI model fidelity has been made recently, alongside a testbed high contrast demonstration in a simulated dynamic environment at JPL. We present our modeling method and results of comparisons to testbed's high order wavefront correction performance for the shaped pupil coronagraph. Agreement between model prediction and testbed result at better than a factor of 2 has been consistently achieved in raw contrast (contrast floor, chromaticity, and convergence), and with that comes good agreement in contrast sensitivity to wavefront perturbations and mask lateral shear.

Establishment of a sensor testbed at NIST for plant productivity monitoring

Science.gov (United States)

Allen, D. W.; Hutyra, L.; Reinmann, A.; Trlica, A.; Marrs, J.; Jones, T.; Whetstone, J. R.; Logan, B.; Reblin, J.

2017-12-01

Accurate assessments of biogenic carbon fluxes is challenging. Correlating optical signatures to plant activity allows for monitoring large regions. New methods, including solar-induced fluorescence (SIF), promise to provide more timely and accurate estimate of plant activity, but we are still developing a full understanding of the mechanistic leakage between plant assimilation of carbon and SIF. We have initiated a testbed to facilitate the evaluation of sensors and methods for remote monitoring of plant activity at the NIST headquarters. The test bed utilizes a forested area of mature trees in a mixed urban environment. A 1 hectare plot within the 26 hectare forest has been instrumented for ecophysiological measurements with an edge (100 m long) that is persistently monitored with multimodal optical sensors (SIF spectrometers, hyperspectral imagers, thermal infrared imaging, and lidar). This biological testbed has the advantage of direct access to the national scales maintained by NIST of measurements related to both the physical and optical measurements of interest. We offer a description of the test site, the sensors, and preliminary results from the first season of observations for ecological, physiological, and remote sensing based estimates of ecosystem productivity.

Towards standard testbeds for numerical relativity

International Nuclear Information System (INIS)

Alcubierre, Miguel; Allen, Gabrielle; Bona, Carles; Fiske, David; Goodale, Tom; Guzman, F Siddhartha; Hawke, Ian; Hawley, Scott H; Husa, Sascha; Koppitz, Michael; Lechner, Christiane; Pollney, Denis; Rideout, David; Salgado, Marcelo; Schnetter, Erik; Seidel, Edward; Shinkai, Hisa-aki; Shoemaker, Deirdre; Szilagyi, Bela; Takahashi, Ryoji; Winicour, Jeff

2004-01-01

In recent years, many different numerical evolution schemes for Einstein's equations have been proposed to address stability and accuracy problems that have plagued the numerical relativity community for decades. Some of these approaches have been tested on different spacetimes, and conclusions have been drawn based on these tests. However, differences in results originate from many sources, including not only formulations of the equations, but also gauges, boundary conditions, numerical methods and so on. We propose to build up a suite of standardized testbeds for comparing approaches to the numerical evolution of Einstein's equations that are designed to both probe their strengths and weaknesses and to separate out different effects, and their causes, seen in the results. We discuss general design principles of suitable testbeds, and we present an initial round of simple tests with periodic boundary conditions. This is a pivotal first step towards building a suite of testbeds to serve the numerical relativists and researchers from related fields who wish to assess the capabilities of numerical relativity codes. We present some examples of how these tests can be quite effective in revealing various limitations of different approaches, and illustrating their differences. The tests are presently limited to vacuum spacetimes, can be run on modest computational resources and can be used with many different approaches used in the relativity community

Towards standard testbeds for numerical relativity

Energy Technology Data Exchange (ETDEWEB)

Alcubierre, Miguel [Inst. de Ciencias Nucleares, Univ. Nacional Autonoma de Mexico, Apartado Postal 70-543, Mexico Distrito Federal 04510 (Mexico); Allen, Gabrielle; Goodale, Tom; Guzman, F Siddhartha; Hawke, Ian; Husa, Sascha; Koppitz, Michael; Lechner, Christiane; Pollney, Denis; Rideout, David [Max-Planck-Inst. fuer Gravitationsphysik, Albert-Einstein-Institut, 14476 Golm (Germany); Bona, Carles [Departament de Fisica, Universitat de les Illes Balears, Ctra de Valldemossa km 7.5, 07122 Palma de Mallorca (Spain); Fiske, David [Dept. of Physics, Univ. of Maryland, College Park, MD 20742-4111 (United States); Hawley, Scott H [Center for Relativity, Univ. of Texas at Austin, Austin, Texas 78712 (United States); Salgado, Marcelo [Inst. de Ciencias Nucleares, Univ. Nacional Autonoma de Mexico, Apartado Postal 70-543, Mexico Distrito Federal 04510 (Mexico); Schnetter, Erik [Inst. fuer Astronomie und Astrophysik, Universitaet Tuebingen, 72076 Tuebingen (Germany); Seidel, Edward [Max-Planck-Inst. fuer Gravitationsphysik, Albert-Einstein-Inst., 14476 Golm (Germany); Shinkai, Hisa-aki [Computational Science Div., Inst. of Physical and Chemical Research (RIKEN), Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Shoemaker, Deirdre [Center for Radiophysics and Space Research, Cornell Univ., Ithaca, NY 14853 (United States); Szilagyi, Bela [Dept. of Physics and Astronomy, Univ. of Pittsburgh, Pittsburgh, PA 15260 (United States); Takahashi, Ryoji [Theoretical Astrophysics Center, Juliane Maries Vej 30, 2100 Copenhagen, (Denmark); Winicour, Jeff [Max-Planck-Inst. fuer Gravitationsphysik, Albert-Einstein-Institut, 14476 Golm (Germany)

2004-01-21

In recent years, many different numerical evolution schemes for Einstein's equations have been proposed to address stability and accuracy problems that have plagued the numerical relativity community for decades. Some of these approaches have been tested on different spacetimes, and conclusions have been drawn based on these tests. However, differences in results originate from many sources, including not only formulations of the equations, but also gauges, boundary conditions, numerical methods and so on. We propose to build up a suite of standardized testbeds for comparing approaches to the numerical evolution of Einstein's equations that are designed to both probe their strengths and weaknesses and to separate out different effects, and their causes, seen in the results. We discuss general design principles of suitable testbeds, and we present an initial round of simple tests with periodic boundary conditions. This is a pivotal first step towards building a suite of testbeds to serve the numerical relativists and researchers from related fields who wish to assess the capabilities of numerical relativity codes. We present some examples of how these tests can be quite effective in revealing various limitations of different approaches, and illustrating their differences. The tests are presently limited to vacuum spacetimes, can be run on modest computational resources and can be used with many different approaches used in the relativity community.

A Testbed For Validating the LHC Controls System Core Before Deployment

CERN Document Server

Nguyen Xuan, J

2011-01-01

Since the start-up of the LHC, it is crucial to carefully test core controls components before deploying them operationally. The Testbed of the CERN accelerator controls group was developed for this purpose. It contains different hardware (PPC, i386) running various operating systems (Linux and LynxOS) and core software components running on front-ends, communication middleware and client libraries. The Testbed first executes integration tests to verify that the components delivered by individual teams interoperate, and then system tests, which verify high-level, end-user functionality. It also verifies that different versions of components are compatible, which is vital, because not all parts of the operational LHC control system can be upgraded simultaneously. In addition, the Testbed can be used for performance and stress tests. Internally, the Testbed is driven by Atlassian Bamboo, a Continuous Integration server, which builds and deploys automatically new software versions into the Test...

Large Scale Data Mining to Improve Usability of Data: An Intelligent Archive Testbed

Science.gov (United States)

Ramapriyan, Hampapuram; Isaac, David; Yang, Wenli; Morse, Steve

2005-01-01

Research in certain scientific disciplines - including Earth science, particle physics, and astrophysics - continually faces the challenge that the volume of data needed to perform valid scientific research can at times overwhelm even a sizable research community. The desire to improve utilization of this data gave rise to the Intelligent Archives project, which seeks to make data archives active participants in a knowledge building system capable of discovering events or patterns that represent new information or knowledge. Data mining can automatically discover patterns and events, but it is generally viewed as unsuited for large-scale use in disciplines like Earth science that routinely involve very high data volumes. Dozens of research projects have shown promising uses of data mining in Earth science, but all of these are based on experiments with data subsets of a few gigabytes or less, rather than the terabytes or petabytes typically encountered in operational systems. To bridge this gap, the Intelligent Archives project is establishing a testbed with the goal of demonstrating the use of data mining techniques in an operationally-relevant environment. This paper discusses the goals of the testbed and the design choices surrounding critical issues that arose during testbed implementation.

AMS San Diego Testbed - Calibration Data

Data.gov (United States)

Department of Transportation — The data in this repository were collected from the San Diego, California testbed, namely, I-15 from the interchange with SR-78 in the north to the interchange with...

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds

Directory of Open Access Journals (Sweden)

Jared A. Frank

2016-08-01

Full Text Available Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their embedded hardware and software in the measurement and control of the test-beds. This approach is a first step towards replacing laboratory-grade peripherals with more compact and affordable smartphone-based platforms, whose interactive user interfaces can engender wider participation and engagement from learners. Demonstrative cases are presented in which the sensing, computation, control, and user interaction with three motor-based test-beds are handled by a mounted smartphone. Results of experiments and simulations are used to validate the feasibility of mounted smartphones as measurement and feedback control platforms for motor-based laboratory test-beds, report the measurement precision and closed-loop performance achieved with such platforms, and address challenges in the development of platforms to maintain system stability.

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds.

Science.gov (United States)

Frank, Jared A; Brill, Anthony; Kapila, Vikram

2016-08-20

Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their embedded hardware and software in the measurement and control of the test-beds. This approach is a first step towards replacing laboratory-grade peripherals with more compact and affordable smartphone-based platforms, whose interactive user interfaces can engender wider participation and engagement from learners. Demonstrative cases are presented in which the sensing, computation, control, and user interaction with three motor-based test-beds are handled by a mounted smartphone. Results of experiments and simulations are used to validate the feasibility of mounted smartphones as measurement and feedback control platforms for motor-based laboratory test-beds, report the measurement precision and closed-loop performance achieved with such platforms, and address challenges in the development of platforms to maintain system stability.

Developing the science product algorithm testbed for Chinese next-generation geostationary meteorological satellites: Fengyun-4 series

Science.gov (United States)

Min, Min; Wu, Chunqiang; Li, Chuan; Liu, Hui; Xu, Na; Wu, Xiao; Chen, Lin; Wang, Fu; Sun, Fenglin; Qin, Danyu; Wang, Xi; Li, Bo; Zheng, Zhaojun; Cao, Guangzhen; Dong, Lixin

2017-08-01

Fengyun-4A (FY-4A), the first of the Chinese next-generation geostationary meteorological satellites, launched in 2016, offers several advances over the FY-2: more spectral bands, faster imaging, and infrared hyperspectral measurements. To support the major objective of developing the prototypes of FY-4 science algorithms, two science product algorithm testbeds for imagers and sounders have been developed by the scientists in the FY-4 Algorithm Working Group (AWG). Both testbeds, written in FORTRAN and C programming languages for Linux or UNIX systems, have been tested successfully by using Intel/g compilers. Some important FY-4 science products, including cloud mask, cloud properties, and temperature profiles, have been retrieved successfully through using a proxy imager, Himawari-8/Advanced Himawari Imager (AHI), and sounder data, obtained from the Atmospheric InfraRed Sounder, thus demonstrating their robustness. In addition, in early 2016, the FY-4 AWG was developed based on the imager testbed—a near real-time processing system for Himawari-8/AHI data for use by Chinese weather forecasters. Consequently, robust and flexible science product algorithm testbeds have provided essential and productive tools for popularizing FY-4 data and developing substantial improvements in FY-4 products.

Development of Liquid Propulsion Systems Testbed at MSFC

Science.gov (United States)

Alexander, Reginald; Nelson, Graham

2016-01-01

As NASA, the Department of Defense and the aerospace industry in general strive to develop capabilities to explore near-Earth, Cis-lunar and deep space, the need to create more cost effective techniques of propulsion system design, manufacturing and test is imperative in the current budget constrained environment. The physics of space exploration have not changed, but the manner in which systems are developed and certified needs to change if there is going to be any hope of designing and building the high performance liquid propulsion systems necessary to deliver crew and cargo to the further reaches of space. To further the objective of developing these systems, the Marshall Space Flight Center is currently in the process of formulating a Liquid Propulsion Systems testbed, which will enable rapid integration of components to be tested and assessed for performance in integrated systems. The manifestation of this testbed is a breadboard engine configuration (BBE) with facility support for consumables and/or other components as needed. The goal of the facility is to test NASA developed elements, but can be used to test articles developed by other government agencies, industry or academia. Joint government/private partnership is likely the approach that will be required to enable efficient propulsion system development. MSFC has recently tested its own additively manufactured liquid hydrogen pump, injector, and valves in a BBE hot firing. It is rapidly building toward testing the pump and a new CH4 injector in the BBE configuration to demonstrate a 22,000 lbf, pump-fed LO2/LCH4 engine for the Mars lander or in-space transportation. The value of having this BBE testbed is that as components are developed they may be easily integrated in the testbed and tested. MSFC is striving to enhance its liquid propulsion system development capability. Rapid design, analysis, build and test will be critical to fielding the next high thrust rocket engine. With the maturity of the

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds

OpenAIRE

Jared A. Frank; Anthony Brill; Vikram Kapila

2016-01-01

Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their em...

Wireless Sensor Networks TestBed: ASNTbed

CSIR Research Space (South Africa)

Dludla, AG

2013-05-01

Full Text Available Wireless sensor networks (WSNs) have been used in different types of applications and deployed within various environments. Simulation tools are essential for studying WSNs, especially for exploring large-scale networks. However, WSN testbeds...

Development of Research Reactor Simulator and Its Application to Dynamic Test-bed

International Nuclear Information System (INIS)

Kwon, Kee Choon; Park, Jae Chang; Lee, Seung Wook; Bang, Dane; Bae, Sung Won

2014-01-01

We developed HANARO and the Jordan Research and Training Reactor (JRTR) real-time simulator for operating staff training. The main purpose of this simulator is operator training, but we modified this simulator as a dynamic test-bed to test the reactor regulating system in HANARO or JRTR before installation. The simulator configuration is divided into hardware and software. The simulator hardware consists of a host computer, 6 operator stations, a network switch, and a large display panel. The simulator software is divided into three major parts: a mathematical modeling module, which executes the plant dynamic modeling program in real-time, an instructor station module that manages user instructions, and a human machine interface (HMI) module. The developed research reactors are installed in the Korea Atomic Energy Research Institute nuclear training center for reactor operator training. To use the simulator as a dynamic test-bed, the reactor regulating system modeling software of the simulator was replaced by a hardware controller and the simulator and target controller were interfaced with a hard-wired and network-based interface

Development of Research Reactor Simulator and Its Application to Dynamic Test-bed

Energy Technology Data Exchange (ETDEWEB)

Kwon, Kee Choon; Park, Jae Chang; Lee, Seung Wook; Bang, Dane; Bae, Sung Won [KAERI, Daejeon (Korea, Republic of)

2014-08-15

We developed HANARO and the Jordan Research and Training Reactor (JRTR) real-time simulator for operating staff training. The main purpose of this simulator is operator training, but we modified this simulator as a dynamic test-bed to test the reactor regulating system in HANARO or JRTR before installation. The simulator configuration is divided into hardware and software. The simulator hardware consists of a host computer, 6 operator stations, a network switch, and a large display panel. The simulator software is divided into three major parts: a mathematical modeling module, which executes the plant dynamic modeling program in real-time, an instructor station module that manages user instructions, and a human machine interface (HMI) module. The developed research reactors are installed in the Korea Atomic Energy Research Institute nuclear training center for reactor operator training. To use the simulator as a dynamic test-bed, the reactor regulating system modeling software of the simulator was replaced by a hardware controller and the simulator and target controller were interfaced with a hard-wired and network-based interface.

Growth plan for an inspirational test-bed of smart textile services

NARCIS (Netherlands)

Wensveen, S.A.G.; Tomico, O.; Bhomer, ten M.; Kuusk, K.

2015-01-01

In this pictorial we visualize the growth plan for an inspirational test-bed of smart textile product service systems. The goal of the test-bed is to inspire and inform the Dutch creative industries of textile, interaction and service design to combine their strengths and share opportunities. The

Wireless Testbed Bonsai

Science.gov (United States)

2006-02-01

wireless sensor device network, and a about 200 Stargate nodes higher-tier multi-hop peer- to-peer 802.11b wireless network. Leading up to the full ExScal...deployment, we conducted spatial scaling tests on our higher-tier protocols on a 7 × 7 grid of Stargates nodes 45m and with 90m separations respectively...onW and its scaled version W̃ . III. EXPERIMENTAL SETUP Description of Kansei testbed. A stargate is a single board linux-based computer [7]. It uses a

SCDU Testbed Automated In-Situ Alignment, Data Acquisition and Analysis

Science.gov (United States)

Werne, Thomas A.; Wehmeier, Udo J.; Wu, Janet P.; An, Xin; Goullioud, Renaud; Nemati, Bijan; Shao, Michael; Shen, Tsae-Pyng J.; Wang, Xu; Weilert, Mark A.;

Integrating Simulated Physics and Device Virtualization in Control System Testbeds

OpenAIRE

Redwood , Owen; Reynolds , Jason; Burmester , Mike

2016-01-01

Part 3: INFRASTRUCTURE MODELING AND SIMULATION; International audience; Malware and forensic analyses of embedded cyber-physical systems are tedious, manual processes that testbeds are commonly not designed to support. Additionally, attesting the physics impact of embedded cyber-physical system malware has no formal methodologies and is currently an art. This chapter describes a novel testbed design methodology that integrates virtualized embedded industrial control systems and physics simula...

Design of aircraft cabin testbed for stress free air travel experiment

NARCIS (Netherlands)

Tan, C.F.; Chen, W.; Rauterberg, G.W.M.

2009-01-01

The paper presents an aircraft cabin testbed that is designed and built for the stress free air travel experiment. The project is funded by European Union in the aim of improving air travel comfort during long haul flight. The testbed is used to test and validate the adaptive system that is capable

Versatile Electric Propulsion Aircraft Testbed, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — An all-electric aircraft testbed is proposed to provide a dedicated development environment for the rigorous study and advancement of electrically powered aircraft....

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds †

Science.gov (United States)

Frank, Jared A.; Brill, Anthony; Kapila, Vikram

2016-01-01

Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their embedded hardware and software in the measurement and control of the test-beds. This approach is a first step towards replacing laboratory-grade peripherals with more compact and affordable smartphone-based platforms, whose interactive user interfaces can engender wider participation and engagement from learners. Demonstrative cases are presented in which the sensing, computation, control, and user interaction with three motor-based test-beds are handled by a mounted smartphone. Results of experiments and simulations are used to validate the feasibility of mounted smartphones as measurement and feedback control platforms for motor-based laboratory test-beds, report the measurement precision and closed-loop performance achieved with such platforms, and address challenges in the development of platforms to maintain system stability. PMID:27556464

Comparison of two matrix data structures for advanced CSM testbed applications

Science.gov (United States)

Regelbrugge, M. E.; Brogan, F. A.; Nour-Omid, B.; Rankin, C. C.; Wright, M. A.

1989-01-01

The first section describes data storage schemes presently used by the Computational Structural Mechanics (CSM) testbed sparse matrix facilities and similar skyline (profile) matrix facilities. The second section contains a discussion of certain features required for the implementation of particular advanced CSM algorithms, and how these features might be incorporated into the data storage schemes described previously. The third section presents recommendations, based on the discussions of the prior sections, for directing future CSM testbed development to provide necessary matrix facilities for advanced algorithm implementation and use. The objective is to lend insight into the matrix structures discussed and to help explain the process of evaluating alternative matrix data structures and utilities for subsequent use in the CSM testbed.

Testbed model and data assimilation for ARM

International Nuclear Information System (INIS)

Louis, J.F.

1992-01-01

The objectives of this contract are to further develop and test the ALFA (AER Local Forecast and Assimilation) model originally designed at AER for local weather prediction and apply it to three distinct but related purposes in connection with the Atmospheric Radiation Measurement (ARM) program: (a) to provide a testbed that simulates a global climate model in order to facilitate the development and testing of new cloud parametrizations and radiation models; (b) to assimilate the ARM data continuously at the scale of a climate model, using the adjoint method, thus providing the initial conditions and verification data for testing parameumtions; (c) to study the sensitivity of a radiation scheme to cloud parameters, again using the adjoint method, thus demonstrating the usefulness of the testbed model. The data assimilation will use a variational technique that minimizes the difference between the model results and the observation during the analysis period. The adjoint model is used to compute the gradient of a measure of the model errors with respect to nudging terms that are added to the equations to force the model output closer to the data. The radiation scheme that will be included in the basic ALFA model makes use of a gen two-stream approximation, and is designed for vertically inhonogeneous, multiple-scattering atmospheres. The sensitivity of this model to the definition of cloud parameters will be studied. The adjoint technique will also be used to compute the sensitivities. This project is designed to provide the Science Team members with the appropriate tools and modeling environment for proper testing and tuning of new radiation models and cloud parametrization schemes

NASA Langley's AirSTAR Testbed: A Subscale Flight Test Capability for Flight Dynamics and Control System Experiments

Science.gov (United States)

Jordan, Thomas L.; Bailey, Roger M.

2008-01-01

As part of the Airborne Subscale Transport Aircraft Research (AirSTAR) project, NASA Langley Research Center (LaRC) has developed a subscaled flying testbed in order to conduct research experiments in support of the goals of NASA s Aviation Safety Program. This research capability consists of three distinct components. The first of these is the research aircraft, of which there are several in the AirSTAR stable. These aircraft range from a dynamically-scaled, twin turbine vehicle to a propeller driven, off-the-shelf airframe. Each of these airframes carves out its own niche in the research test program. All of the airplanes have sophisticated on-board data acquisition and actuation systems, recording, telemetering, processing, and/or receiving data from research control systems. The second piece of the testbed is the ground facilities, which encompass the hardware and software infrastructure necessary to provide comprehensive support services for conducting flight research using the subscale aircraft, including: subsystem development, integrated testing, remote piloting of the subscale aircraft, telemetry processing, experimental flight control law implementation and evaluation, flight simulation, data recording/archiving, and communications. The ground facilities are comprised of two major components: (1) The Base Research Station (BRS), a LaRC laboratory facility for system development, testing and data analysis, and (2) The Mobile Operations Station (MOS), a self-contained, motorized vehicle serving as a mobile research command/operations center, functionally equivalent to the BRS, capable of deployment to remote sites for supporting flight tests. The third piece of the testbed is the test facility itself. Research flights carried out by the AirSTAR team are conducted at NASA Wallops Flight Facility (WFF) on the Eastern Shore of Virginia. The UAV Island runway is a 50 x 1500 paved runway that lies within restricted airspace at Wallops Flight Facility. The

High-contrast imager for Complex Aperture Telescopes (HiCAT): testbed design and coronagraph developments

Science.gov (United States)

N'Diaye, Mamadou; Choquet, E.; Pueyo, L.; Elliot, E.; Perrin, M. D.; Wallace, J.; Anderson, R. E.; Carlotti, A.; Groff, T. D.; Hartig, G. F.; Kasdin, J.; Lajoie, C.; Levecq, O.; Long, C.; Macintosh, B.; Mawet, D.; Norman, C. A.; Shaklan, S.; Sheckells, M.; Sivaramakrishnan, A.; Soummer, R.

2014-01-01

We present a new high-contrast imaging testbed designed to provide complete solutions for wavefront sensing and control and starlight suppression with complex aperture telescopes (NASA APRA; Soummer PI). This includes geometries with central obstruction, support structures, and/or primary mirror segmentation. Complex aperture telescopes are often associated with large telescope designs, which are considered for future space missions. However, these designs makes high-contrast imaging challenging because of additional diffraction features in the point spread function. We present a novel optimization approach for the testbed optical and opto-mechanical design that minimizes the impact of both phase and amplitude errors from the wave propagation of testbed optics surface errors. This design approach allows us to define the specification for the bench optics, which we then compare to the manufactured parts. We discuss the testbed alignment and first results. We also present our coronagraph design for different testbed pupil shapes (AFTA or ATLAST), which involves a new method for the optimization of Apodized Pupil Lyot Coronagraphs (APLC).

Use of Tabu Search in a Solver to Map Complex Networks onto Emulab Testbeds

National Research Council Canada - National Science Library

MacDonald, Jason E

2007-01-01

The University of Utah's solver for the testbed mapping problem uses a simulated annealing metaheuristic algorithm to map a researcher's experimental network topology onto available testbed resources...

Development of a smart-antenna test-bed, demonstrating software defined digital beamforming

NARCIS (Netherlands)

Kluwer, T.; Slump, Cornelis H.; Schiphorst, Roelof; Hoeksema, F.W.

2001-01-01

This paper describes a smart-antenna test-bed consisting of ‘common of the shelf’ (COTS) hardware and software defined radio components. The use of software radio components enables a flexible platform to implement and test mobile communication systems as a real-world system. The test-bed is

Report of the Interagency Optical Network Testbeds Workshop 2, NASA Ames Research Center, September 12-14, 2005

Science.gov (United States)

2005-01-01

The Optical Network Testbeds Workshop 2 (ONT2), held on September 12-14, 2005, was cosponsored by the Department of Energy Office of Science (DOE/SC) and the National Aeronautics and Space Administration (NASA), in cooperation with the Joint Engineering Team (JET) of the Federal Networking and Information Technology Research and Development (NITRD) Program's Large Scale Networking (LSN) Coordinating Group. The ONT2 workshop was a follow-on to an August 2004 Workshop on Optical Network Testbeds (ONT1). ONT1 recommended actions by the Federal agencies to assure timely development and implementation of optical networking technologies and infrastructure. Hosted by the NASA Ames Research Center in Mountain View, California, the ONT2 workshop brought together representatives of the U.S. advanced research and education (R&E) networks, regional optical networks (RONs), service providers, international networking organizations, and senior engineering and R&D managers from Federal agencies and national research laboratories. Its purpose was to develop a common vision of the optical network technologies, services, infrastructure, and organizations needed to enable widespread use of optical networks; recommend activities for transitioning the optical networking research community and its current infrastructure to leading-edge optical networks over the next three to five years; and present information enabling commercial network infrastructure providers to plan for and use leading-edge optical network services in that time frame.

University of Florida Advanced Technologies Campus Testbed

Science.gov (United States)

2017-09-21

The University of Florida (UF) and its Transportation Institute (UFTI), the Florida Department of Transportation (FDOT) and the City of Gainesville (CoG) are cooperating to develop a smart transportation testbed on the University of Florida (UF) main...

Implementation of Real-Time Feedback Flow Control Algorithms on a Canonical Testbed

Science.gov (United States)

Tian, Ye; Song, Qi; Cattafesta, Louis

2005-01-01

This report summarizes the activities on "Implementation of Real-Time Feedback Flow Control Algorithms on a Canonical Testbed." The work summarized consists primarily of two parts. The first part summarizes our previous work and the extensions to adaptive ID and control algorithms. The second part concentrates on the validation of adaptive algorithms by applying them to a vibration beam test bed. Extensions to flow control problems are discussed.

Context-aware local Intrusion Detection in SCADA systems : a testbed and two showcases

NARCIS (Netherlands)

Chromik, Justyna Joanna; Haverkort, Boudewijn R.H.M.; Remke, Anne Katharina Ingrid; Pilch, Carina; Brackmann, Pascal; Duhme, Christof; Everinghoff, Franziska; Giberlein, Artur; Teodorowicz, Thomas; Wieland, Julian

2017-01-01

This paper illustrates the use of a testbed that we have developed for context-aware local intrusion detection. This testbed is based on the co-simulation framework Mosaik and allows for the validation of local intrusion detection mechanisms at field stations in power distribution networks. For two

Cooperative Search with Autonomous Vehicles in a 3D Aquatic Testbed

Science.gov (United States)

2012-01-01

Cooperative Search with Autonomous Vehicles in a 3D Aquatic Testbed Matthew Keeter1, Daniel Moore2,3, Ryan Muller2,3, Eric Nieters1, Jennifer...Many applications for autonomous vehicles involve three-dimensional domains, notably aerial and aquatic environments. Such applications include mon...TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE Cooperative Search With Autonomous Vehicles In A 3D Aquatic Testbed 5a

PEER Testbed Study on a Laboratory Building: Exercising Seismic Performance Assessment

OpenAIRE

Comerio, Mary C.; Stallmeyer, John C.; Smith, Ryan; Makris, Nicos; Konstantinidis, Dimitrios; Mosalam, Khalid; Lee, Tae-Hyung; Beck, James L.; Porter, Keith A.; Shaikhutdinov, Rustem; Hutchinson, Tara; Chaudhuri, Samit Ray; Chang, Stephanie E.; Falit-Baiamonte, Anthony; Holmes, William T.

2005-01-01

From 2002 to 2004 (years five and six of a ten-year funding cycle), the PEER Center organized the majority of its research around six testbeds. Two buildings and two bridges, a campus, and a transportation network were selected as case studies to “exercise” the PEER performance-based earthquake engineering methodology. All projects involved interdisciplinary teams of researchers, each producing data to be used by other colleagues in their research. The testbeds demonstrat...

Modular Algorithm Testbed Suite (MATS): A Software Framework for Automatic Target Recognition

Science.gov (United States)

2017-01-01

NAVAL SURFACE WARFARE CENTER PANAMA CITY DIVISION PANAMA CITY, FL 32407-7001 TECHNICAL REPORT NSWC PCD TR-2017-004 MODULAR ...31-01-2017 Technical Modular Algorithm Testbed Suite (MATS): A Software Framework for Automatic Target Recognition DR...flexible platform to facilitate the development and testing of ATR algorithms. To that end, NSWC PCD has created the Modular Algorithm Testbed Suite

Easy as Pi: A Network Coding Raspberry Pi Testbed

Directory of Open Access Journals (Sweden)

Chres W. Sørensen

2016-10-01

Full Text Available In the near future, upcoming communications and storage networks are expected to tolerate major difficulties produced by huge amounts of data being generated from the Internet of Things (IoT. For these types of networks, strategies and mechanisms based on network coding have appeared as an alternative to overcome these difficulties in a holistic manner, e.g., without sacrificing the benefit of a given network metric when improving another. There has been recurrent issues on: (i making large-scale deployments akin to the Internet of Things; (ii assessing and (iii replicating the obtained results in preliminary studies. Therefore, finding testbeds that can deal with large-scale deployments and not lose historic data in order to evaluate these mechanisms are greatly needed and desirable from a research perspective. However, this can be hard to manage, not only due to the inherent costs of the hardware, but also due to maintenance challenges. In this paper, we present the required key steps to design, setup and maintain an inexpensive testbed using Raspberry Pi devices for communications and storage networks with network coding capabilities. This testbed can be utilized for any applications requiring results replicability.

Software Testbed for Developing and Evaluating Integrated Autonomous Subsystems

Science.gov (United States)

Ong, James; Remolina, Emilio; Prompt, Axel; Robinson, Peter; Sweet, Adam; Nishikawa, David

2015-01-01

To implement fault tolerant autonomy in future space systems, it will be necessary to integrate planning, adaptive control, and state estimation subsystems. However, integrating these subsystems is difficult, time-consuming, and error-prone. This paper describes Intelliface/ADAPT, a software testbed that helps researchers develop and test alternative strategies for integrating planning, execution, and diagnosis subsystems more quickly and easily. The testbed's architecture, graphical data displays, and implementations of the integrated subsystems support easy plug and play of alternate components to support research and development in fault-tolerant control of autonomous vehicles and operations support systems. Intelliface/ADAPT controls NASA's Advanced Diagnostics and Prognostics Testbed (ADAPT), which comprises batteries, electrical loads (fans, pumps, and lights), relays, circuit breakers, invertors, and sensors. During plan execution, an experimentor can inject faults into the ADAPT testbed by tripping circuit breakers, changing fan speed settings, and closing valves to restrict fluid flow. The diagnostic subsystem, based on NASA's Hybrid Diagnosis Engine (HyDE), detects and isolates these faults to determine the new state of the plant, ADAPT. Intelliface/ADAPT then updates its model of the ADAPT system's resources and determines whether the current plan can be executed using the reduced resources. If not, the planning subsystem generates a new plan that reschedules tasks, reconfigures ADAPT, and reassigns the use of ADAPT resources as needed to work around the fault. The resource model, planning domain model, and planning goals are expressed using NASA's Action Notation Modeling Language (ANML). Parts of the ANML model are generated automatically, and other parts are constructed by hand using the Planning Model Integrated Development Environment, a visual Eclipse-based IDE that accelerates ANML model development. Because native ANML planners are currently

Development and application of an actively controlled hybrid proton exchange membrane fuel cell - Lithium-ion battery laboratory test-bed based on off-the-shelf components

Energy Technology Data Exchange (ETDEWEB)

Yufit, V.; Brandon, N.P. [Dept. Earth Science and Engineering, Imperial College, London SW7 2AZ (United Kingdom)

2011-01-15

The use of commercially available components enables rapid prototyping and assembling of laboratory scale hybrid test-bed systems, which can be used to evaluate new hybrid configurations. The development of such a test-bed using an off-the-shelf PEM fuel cell, lithium-ion battery and DC/DC converter is presented here, and its application to a hybrid configuration appropriate for an unmanned underwater vehicle is explored. A control algorithm was implemented to regulate the power share between the fuel cell and the battery with a graphical interface to control, record and analyze the electrochemical and thermal parameters of the system. The results demonstrate the applicability of the test-bed and control algorithm for this application, and provide data on the dynamic electrical and thermal behaviour of the hybrid system. (author)

Interactive aircraft cabin testbed for stress-free air travel system experiment: an innovative concurrent design approach

NARCIS (Netherlands)

Tan, C.F.; Chen, W.; Rauterberg, G.W.M.

2009-01-01

In this paper, a study of the concurrent engineering design for the environmental friendly low cost aircraft cabin simulator is presented. The study describes the used of concurrent design technique in the design activity. The simulator is a testbed that was designed and built for research on

Design of a nickel-hydrogen battery simulator for the NASA EOS testbed

Science.gov (United States)

Gur, Zvi; Mang, Xuesi; Patil, Ashok R.; Sable, Dan M.; Cho, Bo H.; Lee, Fred C.

1992-01-01

The hardware and software design of a nickel-hydrogen (Ni-H2) battery simulator (BS) with application to the NASA Earth Observation System (EOS) satellite is presented. The battery simulator is developed as a part of a complete testbed for the EOS satellite power system. The battery simulator involves both hardware and software components. The hardware component includes the capability of sourcing and sinking current at a constant programmable voltage. The software component includes the capability of monitoring the battery's ampere-hours (Ah) and programming the battery voltage according to an empirical model of the nickel-hydrogen battery stored in a computer.

Diffraction-based analysis of tunnel size for a scaled external occulter testbed

Science.gov (United States)

Sirbu, Dan; Kasdin, N. Jeremy; Vanderbei, Robert J.

2016-07-01

For performance verification of an external occulter mask (also called a starshade), scaled testbeds have been developed to measure the suppression of the occulter shadow in the pupil plane and contrast in the image plane. For occulter experiments the scaling is typically performed by maintaining an equivalent Fresnel number. The original Princeton occulter testbed was oversized with respect to both input beam and shadow propagation to limit any diffraction effects due to finite testbed enclosure edges; however, to operate at realistic space-mission equivalent Fresnel numbers an extended testbed is currently under construction. With the longer propagation distances involved, diffraction effects due to the edge of the tunnel must now be considered in the experiment design. Here, we present a diffraction-based model of two separate tunnel effects. First, we consider the effect of tunnel-edge induced diffraction ringing upstream from the occulter mask. Second, we consider the diffraction effect due to clipping of the output shadow by the tunnel downstream from the occulter mask. These calculations are performed for a representative point design relevant to the new Princeton occulter experiment, but we also present an analytical relation that can be used for other propagation distances.

Implementation of a virtual link between power system testbeds at Marshall Spaceflight Center and Lewis Research Center

Science.gov (United States)

Doreswamy, Rajiv

1990-01-01

The Marshall Space Flight Center (MSFC) owns and operates a space station module power management and distribution (SSM-PMAD) testbed. This system, managed by expert systems, is used to analyze and develop power system automation techniques for Space Station Freedom. The Lewis Research Center (LeRC), Cleveland, Ohio, has developed and implemented a space station electrical power system (EPS) testbed. This system and its power management controller are representative of the overall Space Station Freedom power system. A virtual link is being implemented between the testbeds at MSFC and LeRC. This link would enable configuration of SSM-PMAD as a load center for the EPS testbed at LeRC. This connection will add to the versatility of both systems, and provide an environment of enhanced realism for operation of both testbeds.

Cognitive Medical Wireless Testbed System (COMWITS)

Science.gov (United States)

2016-11-01

Number: ...... ...... Sub Contractors (DD882) Names of other research staff Inventions (DD882) Scientific Progress This testbed merges two ARO grants...bit 64 bit CPU Intel Xeon Processor E5-1650v3 (6C, 3.5 GHz, Turbo, HT , 15M, 140W) Intel Core i7-3770 (3.4 GHz Quad Core, 77W) Dual Intel Xeon

A Method to Analyze Threats and Vulnerabilities by Using a Cyber Security Test-bed of an Operating NPP

International Nuclear Information System (INIS)

Kim, Yong Sik; Son, Choul Woong; Lee, Soo Ill

2016-01-01

In order to implement cyber security controls for an Operating NPP, a security assessment should conduct in advance, and it is essential to analyze threats and vulnerabilities for a cyber security risk assessment phase. It might be impossible to perform a penetration test or scanning for a vulnerability analysis because the test may cause adverse effects on the inherent functions of ones. This is the reason why we develop and construct a cyber security test-bed instead of using real I and C systems in the operating NPP. In this paper, we propose a method to analyze threats and vulnerabilities of a specific target system by using a cyber security test-bed. The test-bed is being developed considering essential functions of the selected safety and non-safety system. This paper shows the method to analyze threats and vulnerabilities of a specific target system by using a cyber security test-bed. In order to develop the cyber security test-bed with both safety and non-safety functions, test-bed functions analysis and preliminary threats and vulnerabilities identification have been conducted. We will determine the attack scenarios and conduct the test-bed based vulnerability analysis

A Method to Analyze Threats and Vulnerabilities by Using a Cyber Security Test-bed of an Operating NPP

Energy Technology Data Exchange (ETDEWEB)

Kim, Yong Sik; Son, Choul Woong; Lee, Soo Ill [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

In order to implement cyber security controls for an Operating NPP, a security assessment should conduct in advance, and it is essential to analyze threats and vulnerabilities for a cyber security risk assessment phase. It might be impossible to perform a penetration test or scanning for a vulnerability analysis because the test may cause adverse effects on the inherent functions of ones. This is the reason why we develop and construct a cyber security test-bed instead of using real I and C systems in the operating NPP. In this paper, we propose a method to analyze threats and vulnerabilities of a specific target system by using a cyber security test-bed. The test-bed is being developed considering essential functions of the selected safety and non-safety system. This paper shows the method to analyze threats and vulnerabilities of a specific target system by using a cyber security test-bed. In order to develop the cyber security test-bed with both safety and non-safety functions, test-bed functions analysis and preliminary threats and vulnerabilities identification have been conducted. We will determine the attack scenarios and conduct the test-bed based vulnerability analysis.

Vacuum Nuller Testbed (VNT) Performance, Characterization and Null Control: Progress Report

Science.gov (United States)

Lyon, Richard G.; Clampin, Mark; Petrone, Peter; Mallik, Udayan; Madison, Timothy; Bolcar, Matthew R.; Noecker, M. Charley; Kendrick, Stephen; Helmbrecht, Michael

2011-01-01

Herein we report on the development. sensing and control and our first results with the Vacuum Nuller Testbed to realize a Visible Nulling Coronagraph (VNC) for exoplanet coronagraphy. The VNC is one of the few approaches that works with filled. segmented and sparse or diluted-aperture telescope systems. It thus spans a range of potential future NASA telescopes and could be Hown as a separate instrument on such a future mission. NASA/Goddard Space Flight Center (GSFC) has a well-established effort to develop VNC technologies. and has developed an incremental sequence of VNC testbeds to advance this approach and the enabling technologies associated with it. We discuss the continued development of the vacuum Visible Nulling Coronagraph testbed (VNT). Tbe VNT is an ultra-stable vibration isolated testbed that operates under closed-loop control within a vacuum chamber. It will be used to achieve an incremental sequence of three visible-light nulling milestones with sequentially higher contrasts of 10(sup 8), 10(sup 9) and ideally 10(sup 10) at an inner working angle of 2*lambda/D. The VNT is based on a modified Mach-Zehnder nulling interferometer, with a "W" configuration to accommodate a hex-packed MEMS based deformable mirror, a coherent fiber bundle and achromatic phase shifters. We discuss the initial laboratory results, the optical configuration, critical technologies and the null sensing and control approach.

Vacuum nuller testbed (VNT) performance, characterization and null control: progress report

Science.gov (United States)

Lyon, Richard G.; Clampin, Mark; Petrone, Peter; Mallik, Udayan; Madison, Timothy; Bolcar, Matthew R.; Noecker, M. Charley; Kendrick, Stephen; Helmbrecht, Michael

2011-10-01

Herein we report on the development, sensing and control and our first results with the Vacuum Nuller Testbed to realize a Visible Nulling Coronagraph (VNC) for exoplanet coronagraphy. The VNC is one of the few approaches that works with filled, segmented and sparse or diluted-aperture telescope systems. It thus spans a range of potential future NASA telescopes and could be flown as a separate instrument on such a future mission. NASA/Goddard Space Flight Center (GSFC) has a well-established effort to develop VNC technologies, and has developed an incremental sequence of VNC testbeds to advance this approach and the enabling technologies associated with it. We discuss the continued development of the vacuum Visible Nulling Coronagraph testbed (VNT). The VNT is an ultra-stable vibration isolated testbed that operates under closed-loop control within a vacuum chamber. It will be used to achieve an incremental sequence of three visible-light nulling milestones with sequentially higher contrasts of 108, 109, and ideally 1010 at an inner working angle of 2*λ/D. The VNT is based on a modified Mach-Zehnder nulling interferometer, with a "W" configuration to accommodate a hex-packed MEMS based deformable mirror, a coherent fiber bundle and achromatic phase shifters. We discuss the initial laboratory results, the optical configuration, critical technologies and the null sensing and control approach.

Design, Development, and Testing of a UAV Hardware-in-the-Loop Testbed for Aviation and Airspace Prognostics Research

Science.gov (United States)

Kulkarni, Chetan; Teubert, Chris; Gorospe, George; Burgett, Drew; Quach, Cuong C.; Hogge, Edward

2016-01-01

The airspace is becoming more and more complicated, and will continue to do so in the future with the integration of Unmanned Aerial Vehicles (UAVs), autonomy, spacecraft, other forms of aviation technology into the airspace. The new technology and complexity increases the importance and difficulty of safety assurance. Additionally, testing new technologies on complex aviation systems & systems of systems can be very difficult, expensive, and sometimes unsafe in real life scenarios. Prognostic methodology provides an estimate of the health and risks of a component, vehicle, or airspace and knowledge of how that will change over time. That measure is especially useful in safety determination, mission planning, and maintenance scheduling. The developed testbed will be used to validate prediction algorithms for the real-time safety monitoring of the National Airspace System (NAS) and the prediction of unsafe events. The framework injects flight related anomalies related to ground systems, routing, airport congestion, etc. to test and verify algorithms for NAS safety. In our research work, we develop a live, distributed, hardware-in-the-loop testbed for aviation and airspace prognostics along with exploring further research possibilities to verify and validate future algorithms for NAS safety. The testbed integrates virtual aircraft using the X-Plane simulator and X-PlaneConnect toolbox, UAVs using onboard sensors and cellular communications, and hardware in the loop components. In addition, the testbed includes an additional research framework to support and simplify future research activities. It enables safe, accurate, and inexpensive experimentation and research into airspace and vehicle prognosis that would not have been possible otherwise. This paper describes the design, development, and testing of this system. Software reliability, safety and latency are some of the critical design considerations in development of the testbed. Integration of HITL elements in

Report of the Interagency Optical Network Testbeds Workshop 2 September 12-14, 2006 NASA Ames Research Center

Energy Technology Data Exchange (ETDEWEB)

Joe Mambretti Richard desJardins

2006-05-01

A new generation of optical networking services and technologies is rapidly changing the world of communications. National and international networks are implementing optical services to supplement traditional packet routed services. On September 12-14, 2005, the Optical Network Testbeds Workshop 2 (ONT2), an invitation-only forum hosted by the NASA Research and Engineering Network (NREN) and co-sponsored by the Department of Energy (DOE), was held at NASA Ames Research Center in Mountain View, California. The aim of ONT2 was to help the Federal Large Scale Networking Coordination Group (LSN) and its Joint Engineering Team (JET) to coordinate testbed and network roadmaps describing agency and partner organization views and activities for moving toward next generation communication services based on leading edge optical networks in the 3-5 year time frame. ONT2 was conceived and organized as a sequel to the first Optical Network Testbeds Workshop (ONT1, August 2004, www.nren.nasa.gov/workshop7). ONT1 resulted in a series of recommendations to LSN. ONT2 was designed to move beyond recommendations to agree on a series of “actionable objectives” that would proactively help federal and partner optical network testbeds and advanced research and education (R&E) networks to begin incorporating technologies and services representing the next generation of advanced optical networks in the next 1-3 years. Participants in ONT2 included representatives from innovative prototype networks (Panel A), basic optical network research testbeds (Panel B), and production R&D networks (Panels C and D), including “JETnets,” selected regional optical networks (RONs), international R&D networks, commercial network technology and service providers (Panel F), and senior engineering and R&D managers from LSN agencies and partner organizations. The overall goal of ONT2 was to identify and coordinate short and medium term activities and milestones for researching, developing, identifying

Visible nulling coronagraphy testbed development for exoplanet detection

Science.gov (United States)

Lyon, Richard G.; Clampin, Mark; Woodruff, Robert A.; Vasudevan, Gopal; Thompson, Patrick; Chen, Andrew; Petrone, Peter; Booth, Andrew; Madison, Timothy; Bolcar, Matthew; Noecker, M. Charley; Kendrick, Stephen; Melnick, Gary; Tolls, Volker

2010-07-01

Three of the recently completed NASA Astrophysics Strategic Mission Concept (ASMC) studies addressed the feasibility of using a Visible Nulling Coronagraph (VNC) as the prime instrument for exoplanet science. The VNC approach is one of the few approaches that works with filled, segmented and sparse or diluted aperture telescope systems and thus spans the space of potential ASMC exoplanet missions. NASA/Goddard Space Flight Center (GSFC) has a well-established effort to develop VNC technologies and has developed an incremental sequence of VNC testbeds to advance the this approach and the technologies associated with it. Herein we report on the continued development of the vacuum Visible Nulling Coronagraph testbed (VNT). The VNT is an ultra-stable vibration isolated testbed that operates under high bandwidth closed-loop control within a vacuum chamber. It will be used to achieve an incremental sequence of three visible light nulling milestones of sequentially higher contrasts of 108, 109 and 1010 at an inner working angle of 2*λ/D and ultimately culminate in spectrally broadband (>20%) high contrast imaging. Each of the milestones, one per year, is traceable to one or more of the ASMC studies. The VNT uses a modified Mach-Zehnder nulling interferometer, modified with a modified "W" configuration to accommodate a hex-packed MEMS based deformable mirror, a coherent fiber bundle and achromatic phase shifters. Discussed will be the optical configuration laboratory results, critical technologies and the null sensing and control approach.

Living with a Star (LWS) Space Environment Testbeds (SET), Mission Carrier Overview and Capabilities

Science.gov (United States)

Patschke, Robert; Barth, Janet; Label, Ken; Mariano, Carolyn; Pham, Karen; Brewer, Dana; Cuviello, Michael; Kobe, David; Wu, Carl; Jarosz, Donald

2004-01-01

NASA has initiated the Living With a Star (LWS) Program to develop the scientific understanding to address the aspects of the Connected Sun-Earth system that affect life and society. A goal of the program is to bridge the gap between science, engineering, and user application communities. This will enable future science, operational, and commercial objectives in space and atmospheric environments by improving engineering approaches to the accommodation and/or mitigation of the effects of solar variability on technological systems. The three program elements of the LWS Program are Science Missions; Targeted Research and Technology; and Space Environment Testbeds (SETS). SET is an ideal platform for small experiments performing research on space environment effects on technologies and on the mitigation of space weather effects. A short description of the LWS Program will be given, and the SET will be described in detail, giving the mission objectives, available carrier services, and upcoming flight opportunities.

Prognostics-Enabled Power Supply for ADAPT Testbed, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Ridgetop's role is to develop electronic prognostics for sensing power systems in support of NASA/Ames ADAPT testbed. The prognostic enabled power systems from...

Towards a Perpetual Sensor Network Testbed without Backchannel

DEFF Research Database (Denmark)

Johansen, Aslak; Bonnet, Philippe; Sørensen, Thomas

2012-01-01

The sensor network testbeds available today rely on a communication channel different from the mote radio - a backchannel - to facilitate mote reprogramming, health monitoring and performance analysis. Such backchannels are either supported as wired communication channels (USB or Ethernet), or vi...

Data dissemination in the wild: A testbed for high-mobility MANETs

DEFF Research Database (Denmark)

Vingelmann, Peter; Pedersen, Morten Videbæk; Heide, Janus

2012-01-01

This paper investigates the problem of efficient data dissemination in Mobile Ad hoc NETworks (MANETs) with high mobility. A testbed is presented; which provides a high degree of mobility in experiments. The testbed consists of 10 autonomous robots with mobile phones mounted on them. The mobile...... information, and the goal is to convey that information to all devices. A strategy is proposed that uses UDP broadcast transmissions and random linear network coding to facilitate the efficient exchange of information in the network. An application is introduced that implements this strategy on Nokia phones...

Digital Preservation Theory and Application: Transcontinental Persistent Archives Testbed Activity

Directory of Open Access Journals (Sweden)

Paul Watry

2007-12-01

Full Text Available The National Archives and Records Administration (NARA and EU SHAMAN projects are working with multiple research institutions on tools and technologies that will supply a comprehensive, systematic, and dynamic means for preserving virtually any type of electronic record, free from dependence on any specific hardware or software. This paper describes the joint development work between the University of Liverpool and the San Diego Supercomputer Center (SDSC at the University of California, San Diego on the NARA and SHAMAN prototypes. The aim is to provide technologies in support of the required generic data management infrastructure. We describe a Theory of Preservation that quantifies how communication can be accomplished when future technologies are different from those available at present. This includes not only different hardware and software, but also different standards for encoding information. We describe the concept of a “digital ontology” to characterize preservation processes; this is an advance on the current OAIS Reference Model of providing representation information about records. To realize a comprehensive Theory of Preservation, we describe the ongoing integration of distributed shared collection management technologies, digital library browsing, and presentation technologies for the NARA and SHAMAN Persistent Archive Testbeds.

High Contrast Vacuum Nuller Testbed (VNT) Contrast, Performance and Null Control

Science.gov (United States)

Lyon, Richard G.; Clampin, Mark; Petrone, Peter; Mallik, Udayan; Madison, Timothy; Bolcar, Matthew R.

2012-01-01

Herein we report on our Visible Nulling Coronagraph high-contrast result of 109 contrast averaged over a focal planeregion extending from 14 D with the Vacuum Nuller Testbed (VNT) in a vibration isolated vacuum chamber. TheVNC is a hybrid interferometriccoronagraphic approach for exoplanet science. It operates with high Lyot stopefficiency for filled, segmented and sparse or diluted-aperture telescopes, thereby spanning the range of potential futureNASA flight telescopes. NASAGoddard Space Flight Center (GSFC) has a well-established effort to develop the VNCand its technologies, and has developed an incremental sequence of VNC testbeds to advance this approach and itsenabling technologies. These testbeds have enabled advancement of high-contrast, visible light, nulling interferometry tounprecedented levels. The VNC is based on a modified Mach-Zehnder nulling interferometer, with a W configurationto accommodate a hex-packed MEMS based deformable mirror, a coherent fiber bundle and achromatic phase shifters.We give an overview of the VNT and discuss the high-contrast laboratory results, the optical configuration, criticaltechnologies and null sensing and control.

High contrast vacuum nuller testbed (VNT) contrast, performance, and null control

Science.gov (United States)

Lyon, Richard G.; Clampin, Mark; Petrone, Peter; Mallik, Udayan; Madison, Timothy; Bolcar, Matthew R.

2012-09-01

Herein we report on our Visible Nulling Coronagraph high-contrast result of 109 contrast averaged over a focal plane region extending from 1 - 4 λ/D with the Vacuum Nuller Testbed (VNT) in a vibration isolated vacuum chamber. The VNC is a hybrid interferometric/coronagraphic approach for exoplanet science. It operates with high Lyot stop efficiency for filled, segmented and sparse or diluted-aperture telescopes, thereby spanning the range of potential future NASA flight telescopes. NASA/Goddard Space Flight Center (GSFC) has a well-established effort to develop the VNC and its technologies, and has developed an incremental sequence of VNC testbeds to advance this approach and its enabling technologies. These testbeds have enabled advancement of high-contrast, visible light, nulling interferometry to unprecedented levels. The VNC is based on a modified Mach-Zehnder nulling interferometer, with a “W” configuration to accommodate a hex-packed MEMS based deformable mirror, a coherent fiber bundle and achromatic phase shifters. We give an overview of the VNT and discuss the high-contrast laboratory results, the optical configuration, critical technologies and null sensing and control.

A Functional Neuroimaging Analysis of the Trail Making Test-B: Implications for Clinical Application

Directory of Open Access Journals (Sweden)

Mark D. Allen

2011-01-01

Full Text Available Recent progress has been made using fMRI as a clinical assessment tool, often employing analogues of traditional “paper and pencil” tests. The Trail Making Test (TMT, popular for years as a neuropsychological exam, has been largely ignored in the realm of neuroimaging, most likely because its physical format and administration does not lend itself to straightforward adaptation as an fMRI paradigm. Likewise, there is relatively more ambiguity about the neural systems associated with this test than many other tests of comparable clinical use. In this study, we describe an fMRI version of Trail Making Test-B (TMTB that maintains the core functionality of the TMT while optimizing its use for both research and clinical settings. Subjects (N = 32 were administered the Functional Trail Making Test-B (f-TMTB. Brain region activations elicited by the f-TMTB were consistent with expectations given by prior TMT neurophysiological studies, including significant activations in the ventral and dorsal visual pathways and the medial pre-supplementary motor area. The f-TMTB was further evaluated for concurrent validity with the traditional TMTB using an additional sample of control subjects (N = 100. Together, these results support the f-TMTB as a viable neuroimaging adaptation of the TMT that is optimized to evoke maximally robust fMRI activation with minimal time and equipment requirements.

Automatic Integration Testbeds validation on Open Science Grid

International Nuclear Information System (INIS)

Caballero, J; Potekhin, M; Thapa, S; Gardner, R

2011-01-01

A recurring challenge in deploying high quality production middleware is the extent to which realistic testing occurs before release of the software into the production environment. We describe here an automated system for validating releases of the Open Science Grid software stack that leverages the (pilot-based) PanDA job management system developed and used by the ATLAS experiment. The system was motivated by a desire to subject the OSG Integration Testbed to more realistic validation tests. In particular those which resemble to every extent possible actual job workflows used by the experiments thus utilizing job scheduling at the compute element (CE), use of the worker node execution environment, transfer of data to/from the local storage element (SE), etc. The context is that candidate releases of OSG compute and storage elements can be tested by injecting large numbers of synthetic jobs varying in complexity and coverage of services tested. The native capabilities of the PanDA system can thus be used to define jobs, monitor their execution, and archive the resulting run statistics including success and failure modes. A repository of generic workflows and job types to measure various metrics of interest has been created. A command-line toolset has been developed so that testbed managers can quickly submit 'VO-like' jobs into the system when newly deployed services are ready for testing. A system for automatic submission has been crafted to send jobs to integration testbed sites, collecting the results in a central service and generating regular reports for performance and reliability.

Automatic Integration Testbeds validation on Open Science Grid

Science.gov (United States)

Caballero, J.; Thapa, S.; Gardner, R.; Potekhin, M.

2011-12-01

A recurring challenge in deploying high quality production middleware is the extent to which realistic testing occurs before release of the software into the production environment. We describe here an automated system for validating releases of the Open Science Grid software stack that leverages the (pilot-based) PanDA job management system developed and used by the ATLAS experiment. The system was motivated by a desire to subject the OSG Integration Testbed to more realistic validation tests. In particular those which resemble to every extent possible actual job workflows used by the experiments thus utilizing job scheduling at the compute element (CE), use of the worker node execution environment, transfer of data to/from the local storage element (SE), etc. The context is that candidate releases of OSG compute and storage elements can be tested by injecting large numbers of synthetic jobs varying in complexity and coverage of services tested. The native capabilities of the PanDA system can thus be used to define jobs, monitor their execution, and archive the resulting run statistics including success and failure modes. A repository of generic workflows and job types to measure various metrics of interest has been created. A command-line toolset has been developed so that testbed managers can quickly submit "VO-like" jobs into the system when newly deployed services are ready for testing. A system for automatic submission has been crafted to send jobs to integration testbed sites, collecting the results in a central service and generating regular reports for performance and reliability.

Implementation of a RPS Cyber Security Test-bed with Two PLCs

International Nuclear Information System (INIS)

Shin, Jinsoo; Heo, Gyunyoung; Son, Hanseong; An, Yongkyu; Rizwan, Uddin

2015-01-01

Our research team proposed the methodology to evaluate cyber security with Bayesian network (BN) as a cyber security evaluation model and help operator, licensee, licensor or regulator in granting evaluation priorities. The methodology allowed for overall evaluation of cyber security by considering architectural aspect of facility and management aspect of cyber security at the same time. In order to emphasize reality of this model by inserting true data, it is necessary to conduct a penetration test that pretends an actual cyber-attack. Through the collaboration with University of Illinois at Urbana-Champaign, which possesses the Tricon a safety programmable logic controller (PLC) used at nuclear power plants and develops a test-bed for nuclear power plant, a test-bed for reactor protection system (RPS) is being developed with the PLCs. Two PLCs are used to construct a simple test-bed for RPS, bi-stable processor (BP) and coincidence processor (CP). By using two PLCs, it is possible to examine cyber-attack against devices such as PLC, cyber-attack against communication between devices, and the effects of a PLC on the other PLC. Two PLCs were used to construct a test-bed for penetration test in this study. Advantages of using two or more PLCs instead of single PLC are as follows. 1) Results of cyber-attack reflecting characteristics among PLCs can be obtained. 2) Cyber-attack can be attempted using a method of attacking communication between PLCs. True data obtained can be applied to existing cyber security evaluation model to emphasize reality of the model

Implementation of a RPS Cyber Security Test-bed with Two PLCs

Energy Technology Data Exchange (ETDEWEB)

Shin, Jinsoo; Heo, Gyunyoung [Kyung Hee Univ., Yongin (Korea, Republic of); Son, Hanseong [Joongbu Univ., Geumsan (Korea, Republic of); An, Yongkyu; Rizwan, Uddin [University of Illinois at Urbana-Champaign, Urbana (United States)

2015-10-15

Our research team proposed the methodology to evaluate cyber security with Bayesian network (BN) as a cyber security evaluation model and help operator, licensee, licensor or regulator in granting evaluation priorities. The methodology allowed for overall evaluation of cyber security by considering architectural aspect of facility and management aspect of cyber security at the same time. In order to emphasize reality of this model by inserting true data, it is necessary to conduct a penetration test that pretends an actual cyber-attack. Through the collaboration with University of Illinois at Urbana-Champaign, which possesses the Tricon a safety programmable logic controller (PLC) used at nuclear power plants and develops a test-bed for nuclear power plant, a test-bed for reactor protection system (RPS) is being developed with the PLCs. Two PLCs are used to construct a simple test-bed for RPS, bi-stable processor (BP) and coincidence processor (CP). By using two PLCs, it is possible to examine cyber-attack against devices such as PLC, cyber-attack against communication between devices, and the effects of a PLC on the other PLC. Two PLCs were used to construct a test-bed for penetration test in this study. Advantages of using two or more PLCs instead of single PLC are as follows. 1) Results of cyber-attack reflecting characteristics among PLCs can be obtained. 2) Cyber-attack can be attempted using a method of attacking communication between PLCs. True data obtained can be applied to existing cyber security evaluation model to emphasize reality of the model.

Development of a hardware-in-the-loop testbed to demonstrate multiple spacecraft operations in proximity

Science.gov (United States)

Eun, Youngho; Park, Sang-Young; Kim, Geuk-Nam

2018-06-01

This paper presents a new state-of-the-art ground-based hardware-in-the-loop test facility, which was developed to verify and demonstrate autonomous guidance, navigation, and control algorithms for space proximity operations and formation flying maneuvers. The test facility consists of two complete spaceflight simulators, an aluminum-based operational arena, and a set of infrared motion tracking cameras; thus, the testbed is capable of representing space activities under circumstances prevailing on the ground. The spaceflight simulators have a maximum of five-degree-of-freedom in a quasi-momentum-free environment, which is produced by a set of linear/hemispherical air-bearings and a horizontally leveled operational arena. The tracking system measures the real-time three-dimensional position and attitude to provide state variables to the agents. The design of the testbed is illustrated in detail for every element throughout the paper. The practical hardware characteristics of the active/passive measurement units and internal actuators are identified in detail from various perspectives. These experimental results support the successful development of the entire facility and enable us to implement and verify the spacecraft proximity operation strategy in the near future.

Variable Coding and Modulation Experiment Using NASA's Space Communication and Navigation Testbed

Science.gov (United States)

Downey, Joseph A.; Mortensen, Dale J.; Evans, Michael A.; Tollis, Nicholas S.

2016-01-01

National Aeronautics and Space Administration (NASA)'s Space Communication and Navigation Testbed on the International Space Station provides a unique opportunity to evaluate advanced communication techniques in an operational system. The experimental nature of the Testbed allows for rapid demonstrations while using flight hardware in a deployed system within NASA's networks. One example is variable coding and modulation, which is a method to increase data-throughput in a communication link. This paper describes recent flight testing with variable coding and modulation over S-band using a direct-to-earth link between the SCaN Testbed and the Glenn Research Center. The testing leverages the established Digital Video Broadcasting Second Generation (DVB-S2) standard to provide various modulation and coding options. The experiment was conducted in a challenging environment due to the multipath and shadowing caused by the International Space Station structure. Performance of the variable coding and modulation system is evaluated and compared to the capacity of the link, as well as standard NASA waveforms.

A Battery Certification Testbed for Small Satellite Missions

Science.gov (United States)

Cameron, Zachary; Kulkarni, Chetan S.; Luna, Ali Guarneros; Goebel, Kai; Poll, Scott

2015-01-01

A battery pack consisting of standard cylindrical 18650 lithium-ion cells has been chosen for small satellite missions based on previous flight heritage and compliance with NASA battery safety requirements. However, for batteries that transit through the International Space Station (ISS), additional certification tests are required for individual cells as well as the battery packs. In this manuscript, we discuss the development of generalized testbeds for testing and certifying different types of batteries critical to small satellite missions. Test procedures developed and executed for this certification effort include: a detailed physical inspection before and after experiments; electrical cycling characterization at the cell and pack levels; battery-pack overcharge, over-discharge, external short testing; battery-pack vacuum leak and vibration testing. The overall goals of these certification procedures are to conform to requirements set forth by the agency and identify unique safety hazards. The testbeds, procedures, and experimental results are discussed for batteries chosen for small satellite missions to be launched from the ISS.

Radiation beamline testbeds for the simulation of planetary and spacecraft environments for human and robotic mission risk assessment

Science.gov (United States)

Wilkins, Richard

The Center for Radiation Engineering and Science for Space Exploration (CRESSE) at Prairie View A&M University, Prairie View, Texas, USA, is establishing an integrated, multi-disciplinary research program on the scientific and engineering challenges faced by NASA and the inter-national space community caused by space radiation. CRESSE focuses on space radiation research directly applicable to astronaut health and safety during future long term, deep space missions, including Martian, lunar, and other planetary body missions beyond low earth orbit. The research approach will consist of experimental and theoretical radiation modeling studies utilizing particle accelerator facilities including: 1. NASA Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory; 2. Proton Synchrotron at Loma Linda University Med-ical Center; and 3. Los Alamos Neutron Science Center (LANSCE) at Los Alamos National Laboratory. Specifically, CRESSE investigators are designing, developing, and building experimental test beds that simulate the lunar and Martian radiation environments for experiments focused on risk assessment for astronauts and instrumentation. The testbeds have been designated the Bioastronautics Experimental Research Testbeds for Environmental Radiation Nostrum Investigations and Education (BERT and ERNIE). The designs of BERT and ERNIE will allow for a high degree of flexibility and adaptability to modify experimental configurations to simulate planetary surface environments, planetary habitats, and spacecraft interiors. In the nominal configuration, BERT and ERIE will consist of a set of experimental zones that will simulate the planetary atmosphere (Solid CO2 in the case of the Martian surface.), the planetary surface, and sub-surface regions. These experimental zones can be used for dosimetry, shielding, biological, and electronic effects radiation studies in support of space exploration missions. BERT and ERNIE are designed to be compatible with the

Multi-level infrastructure of interconnected testbeds of large-scale wireless sensor networks (MI2T-WSN)

CSIR Research Space (South Africa)

Abu-Mahfouz, Adnan M

2012-06-01

Full Text Available are still required for further testing before the real implementation. In this paper we propose a multi-level infrastructure of interconnected testbeds of large- scale WSNs. This testbed consists of 1000 sensor motes that will be distributed into four...

The Airborne Optical Systems Testbed (AOSTB)

Science.gov (United States)

2017-05-31

are the Atlantic Ocean and coastal waterways, which reflect back very little light at our SWIR operating wavelength of 1064 nm. The Airborne Optical...demonstrate our typical FOPEN capabilities, figure 5 shows two images taken over a forested area near Burlington, VT. Figure 5(a) is a 3D point...Systems Testbed (AOSTB) 1 - 6 STO-MP-SET-999 (a) (b) Fig. 5. Ladar target scan of a forested area in northern Vermont

Use of Bioregenerative Technologies for Advanced Life Support: Some Considerations for BIO-Plex and Related Testbeds

Science.gov (United States)

Wheeler, Raymond M.; Strayer, Richard F.

1997-01-01

A review of bioregenerative life support concepts is provided as a guide for developing ground-based testbeds for NASA's Advanced Life Support Program. Key among these concepts are the use of controlled environment plant culture for the production of food, oxygen, and clean water, and the use of bacterial bioreactors for degrading wastes and recycling nutrients. Candidate crops and specific bioreactor approaches are discussed based on experiences from the. Kennedy Space Center Advanced Life Support Breadboard Project, and a review of related literature is provided.

A Multi-Vehicles, Wireless Testbed for Networked Control, Communications and Computing

Science.gov (United States)

Murray, Richard; Doyle, John; Effros, Michelle; Hickey, Jason; Low, Steven

2002-03-01

We have constructed a testbed consisting of 4 mobile vehicles (with 4 additional vehicles being completed), each with embedded computing and communications capability for use in testing new approaches for command and control across dynamic networks. The system is being used or is planned to be used for testing of a variety of communications-related technologies, including distributed command and control algorithms, dynamically reconfigurable network topologies, source coding for real-time transmission of data in lossy environments, and multi-network communications. A unique feature of the testbed is the use of vehicles that have second order dynamics. Requiring real-time feedback algorithms to stabilize the system while performing cooperative tasks. The testbed was constructed in the Caltech Vehicles Laboratory and consists of individual vehicles with PC-based computation and controls, and multiple communications devices (802.11 wireless Ethernet, Bluetooth, and infrared). The vehicles are freely moving, wheeled platforms propelled by high performance dotted fairs. The room contains an access points for an 802.11 network, overhead visual sensing (to allow emulation of CI'S signal processing), a centralized computer for emulating certain distributed computations, and network gateways to control and manipulate communications traffic.

SCaN Testbed Software Development and Lessons Learned

Science.gov (United States)

Kacpura, Thomas J.; Varga, Denise M.

2012-01-01

National Aeronautics and Space Administration (NASA) has developed an on-orbit, adaptable, Software Defined Radio (SDR)Space Telecommunications Radio System (STRS)-based testbed facility to conduct a suite of experiments to advance technologies, reduce risk, and enable future mission capabilities on the International Space Station (ISS). The SCAN Testbed Project will provide NASA, industry, other Government agencies, and academic partners the opportunity to develop and field communications, navigation, and networking technologies in the laboratory and space environment based on reconfigurable, SDR platforms and the STRS Architecture.The SDRs are a new technology for NASA, and the support infrastructure they require is different from legacy, fixed function radios. SDRs offer the ability to reconfigure on-orbit communications by changing software for new waveforms and operating systems to enable new capabilities or fix any anomalies, which was not a previous option. They are not stand alone devices, but required a new approach to effectively control them and flow data. This requires extensive software to be developed to utilize the full potential of these reconfigurable platforms. The paper focuses on development, integration and testing as related to the avionics processor system, and the software required to command, control, monitor, and interact with the SDRs, as well as the other communication payload elements. An extensive effort was required to develop the flight software and meet the NASA requirements for software quality and safety. The flight avionics must be radiation tolerant, and these processors have limited capability in comparison to terrestrial counterparts. A big challenge was that there are three SDRs onboard, and interfacing with multiple SDRs simultaneously complicatesd the effort. The effort also includes ground software, which is a key element for both the command of the payload, and displaying data created by the payload. The verification of

ASE-BAN, a Wireless Body Area Network Testbed

DEFF Research Database (Denmark)

Madsen, Jens Kargaard; Karstoft, Henrik; Toftegaard, Thomas Skjødeberg

2010-01-01

/actuators attached to the body and a host server application. The gateway uses the BlackFin BF533 processor from Analog Devices, and uses Bluetooth for wireless communication. Two types of sensors are attached to the network: an electro-cardio-gram sensor and an oximeter sensor. The testbed has been successfully...

LOS Throughput Measurements in Real-Time with a 128-Antenna Massive MIMO Testbed

OpenAIRE

Harris, Paul; Zhang, Siming; Beach, Mark; Mellios, Evangelos; Nix, Andrew; Armour, Simon; Doufexi, Angela; Nieman, Karl; Kundargi, Nikhil

2017-01-01

This paper presents initial results for a novel 128-antenna massive Multiple-Input, Multiple- Output (MIMO) testbed developed through Bristol Is Open in collaboration with National Instruments and Lund University. We believe that the results presented here validate the adoption of massive MIMO as a key enabling technology for 5G and pave the way for further pragmatic research by the massive MIMO community. The testbed operates in real-time with a Long-Term Evolution (LTE)-like PHY in Time Div...

Current Developments in DETER Cybersecurity Testbed Technology

Science.gov (United States)

2015-12-08

Management Experimental cybersecurity research is often inherently risky. An experiment may involve releasing live malware code, operating a real botnet...imagine a worm that can only propagate by first contacting a “propagation service” (T1 constraint), composed with a testbed firewall (T2...experiment. Finally, T1 constraints might be enforced by (1) explicit modification of malware to constrain its behavior, (2) implicit constraints

Construction of test-bed system of voltage management system to ...

African Journals Online (AJOL)

Construction of test-bed system of voltage management system to apply physical power system. ... Journal of Fundamental and Applied Sciences ... system of voltage management system (VMS) in order to apply physical power system.

An SDR-Based Real-Time Testbed for GNSS Adaptive Array Anti-Jamming Algorithms Accelerated by GPU

Directory of Open Access Journals (Sweden)

Hailong Xu

2016-03-01

Full Text Available Nowadays, software-defined radio (SDR has become a common approach to evaluate new algorithms. However, in the field of Global Navigation Satellite System (GNSS adaptive array anti-jamming, previous work has been limited due to the high computational power demanded by adaptive algorithms, and often lack flexibility and configurability. In this paper, the design and implementation of an SDR-based real-time testbed for GNSS adaptive array anti-jamming accelerated by a Graphics Processing Unit (GPU are documented. This testbed highlights itself as a feature-rich and extendible platform with great flexibility and configurability, as well as high computational performance. Both Space-Time Adaptive Processing (STAP and Space-Frequency Adaptive Processing (SFAP are implemented with a wide range of parameters. Raw data from as many as eight antenna elements can be processed in real-time in either an adaptive nulling or beamforming mode. To fully take advantage of the parallelism resource provided by the GPU, a batched method in programming is proposed. Tests and experiments are conducted to evaluate both the computational and anti-jamming performance. This platform can be used for research and prototyping, as well as a real product in certain applications.

Development of a Testbed for Wireless Underground Sensor Networks

Directory of Open Access Journals (Sweden)

Mehmet C. Vuran

2010-01-01

Full Text Available Wireless Underground Sensor Networks (WUSNs constitute one of the promising application areas of the recently developed wireless sensor networking techniques. WUSN is a specialized kind of Wireless Sensor Network (WSN that mainly focuses on the use of sensors that communicate through soil. Recent models for the wireless underground communication channel are proposed but few field experiments were realized to verify the accuracy of the models. The realization of field WUSN experiments proved to be extremely complex and time-consuming in comparison with the traditional wireless environment. To the best of our knowledge, this is the first work that proposes guidelines for the development of an outdoor WUSN testbed with the goals of improving the accuracy and reducing of time for WUSN experiments. Although the work mainly aims WUSNs, many of the presented practices can also be applied to generic WSN testbeds.

Implementation of a Wireless Time Distribution Testbed Protected with Quantum Key Distribution

Energy Technology Data Exchange (ETDEWEB)

Bonior, Jason D [ORNL; Evans, Philip G [ORNL; Sheets, Gregory S [ORNL; Jones, John P [ORNL; Flynn, Toby H [ORNL; O' Neil, Lori Ross [Pacific Northwest National Laboratory (PNNL); Hutton, William [Pacific Northwest National Laboratory (PNNL); Pratt, Richard [Pacific Northwest National Laboratory (PNNL); Carroll, Thomas E. [Pacific Northwest National Laboratory (PNNL)

2017-01-01

Secure time transfer is critical for many timesensitive applications. the Global Positioning System (GPS) which is often used for this purpose has been shown to be susceptible to spoofing attacks. Quantum Key Distribution offers a way to securely generate encryption keys at two locations. Through careful use of this information it is possible to create a system that is more resistant to spoofing attacks. In this paper we describe our work to create a testbed which utilizes QKD and traditional RF links. This testbed will be used for the development of more secure and spoofing resistant time distribution protocols.

The Soil Moisture Active Passive Mission (SMAP) Science Data Products: Results of Testing with Field Experiment and Algorithm Testbed Simulation Environment Data

Science.gov (United States)

Entekhabi, Dara; Njoku, Eni E.; O'Neill, Peggy E.; Kellogg, Kent H.; Entin, Jared K.

2010-01-01

Talk outline 1. Derivation of SMAP basic and applied science requirements from the NRC Earth Science Decadal Survey applications 2. Data products and latencies 3. Algorithm highlights 4. SMAP Algorithm Testbed 5. SMAP Working Groups and community engagement

Phased Array Antenna Testbed Development at the NASA Glenn Research Center

Science.gov (United States)

Lambert, Kevin M.; Kubat, Gregory; Johnson, Sandra K.; Anzic, Godfrey

2003-01-01

Ideal phased array antennas offer advantages for communication systems, such as wide-angle scanning and multibeam operation, which can be utilized in certain NASA applications. However, physically realizable, electronically steered, phased array antennas introduce additional system performance parameters, which must be included in the evaluation of the system. The NASA Glenn Research Center (GRC) is currently conducting research to identify these parameters and to develop the tools necessary to measure them. One of these tools is a testbed where phased array antennas may be operated in an environment that simulates their use. This paper describes the development of the testbed and its use in characterizing a particular K-Band, phased array antenna.

LTE-Advanced/WLAN testbed

OpenAIRE

Plaisner, Denis

2017-01-01

Táto práca sa zaoberá skúmaním a vyhodnocovaním komunikácie štandardov LTE-Advance a WiFi (IEEE 802.11n/ac). Pri jednotlivých štandardoch je preskúmaný chybový parameter EVM. Pre prácu s jednotlivými štandardmi je navrhnuté univerzálne pracovisko (testbed). Toto univerzálne pracovisko slúži na nastavovanie vysielacieho a prijímacieho zariadenia a na spracovávanie prenášaných signálov a ich vyhodnocovanie. Pre túto prácu je vybrané prostredie Matlab, cez ktoré sa ovládajú použité prístroje ako...

Building a ROS-Based Testbed for Realistic Multi-Robot Simulation: Taking the Exploration as an Example

Directory of Open Access Journals (Sweden)

Zhi Yan

2017-09-01

Full Text Available While the robotics community agrees that the benchmarking is of high importance to objectively compare different solutions, there are only few and limited tools to support it. To address this issue in the context of multi-robot systems, we have defined a benchmarking process based on experimental designs, which aimed at improving the reproducibility of experiments by making explicit all elements of a benchmark such as parameters, measurements and metrics. We have also developed a ROS (Robot Operating System-based testbed with the goal of making it easy for users to validate, benchmark, and compare different algorithms including coordination strategies. Our testbed uses the MORSE (Modular OpenRobots Simulation Engine simulator for realistic simulation and a computer cluster for decentralized computation. In this paper, we present our testbed in details with the architecture and infrastructure, the issues encountered in implementing the infrastructure, and the automation of the deployment. We also report a series of experiments on multi-robot exploration, in order to demonstrate the capabilities of our testbed.

TORCH Computational Reference Kernels - A Testbed for Computer Science Research

Energy Technology Data Exchange (ETDEWEB)

Kaiser, Alex; Williams, Samuel Webb; Madduri, Kamesh; Ibrahim, Khaled; Bailey, David H.; Demmel, James W.; Strohmaier, Erich

2010-12-02

For decades, computer scientists have sought guidance on how to evolve architectures, languages, and programming models in order to improve application performance, efficiency, and productivity. Unfortunately, without overarching advice about future directions in these areas, individual guidance is inferred from the existing software/hardware ecosystem, and each discipline often conducts their research independently assuming all other technologies remain fixed. In today's rapidly evolving world of on-chip parallelism, isolated and iterative improvements to performance may miss superior solutions in the same way gradient descent optimization techniques may get stuck in local minima. To combat this, we present TORCH: A Testbed for Optimization ResearCH. These computational reference kernels define the core problems of interest in scientific computing without mandating a specific language, algorithm, programming model, or implementation. To compliment the kernel (problem) definitions, we provide a set of algorithmically-expressed verification tests that can be used to verify a hardware/software co-designed solution produces an acceptable answer. Finally, to provide some illumination as to how researchers have implemented solutions to these problems in the past, we provide a set of reference implementations in C and MATLAB.

A MIMO-OFDM Testbed for Wireless Local Area Networks

Directory of Open Access Journals (Sweden)

Conrat Jean-Marc

2006-01-01

Full Text Available We describe the design steps and final implementation of a MIMO OFDM prototype platform developed to enhance the performance of wireless LAN standards such as HiperLAN/2 and 802.11, using multiple transmit and multiple receive antennas. We first describe the channel measurement campaign used to characterize the indoor operational propagation environment, and analyze the influence of the channel on code design through a ray-tracing channel simulator. We also comment on some antenna and RF issues which are of importance for the final realization of the testbed. Multiple coding, decoding, and channel estimation strategies are discussed and their respective performance-complexity trade-offs are evaluated over the realistic channel obtained from the propagation studies. Finally, we present the design methodology, including cross-validation of the Matlab, C++, and VHDL components, and the final demonstrator architecture. We highlight the increased measured performance of the MIMO testbed over the single-antenna system.

A Testbed Environment for Buildings-to-Grid Cyber Resilience Research and Development

Energy Technology Data Exchange (ETDEWEB)

Sridhar, Siddharth; Ashok, Aditya; Mylrea, Michael E.; Pal, Seemita; Rice, Mark J.; Gourisetti, Sri Nikhil Gup

2017-09-19

The Smart Grid is characterized by the proliferation of advanced digital controllers at all levels of its operational hierarchy from generation to end consumption. Such controllers within modern residential and commercial buildings enable grid operators to exercise fine-grained control over energy consumption through several emerging Buildings-to-Grid (B2G) applications. Though this capability promises significant benefits in terms of operational economics and improved reliability, cybersecurity weaknesses in the supporting infrastructure could be exploited to cause a detrimental effect and this necessitates focused research efforts on two fronts. First, the understanding of how cyber attacks in the B2G space could impact grid reliability and to what extent. Second, the development and validation of cyber-physical application-specific countermeasures that are complementary to traditional infrastructure cybersecurity mechanisms for enhanced cyber attack detection and mitigation. The PNNL B2G testbed is currently being developed to address these core research needs. Specifically, the B2G testbed combines high-fidelity buildings+grid simulators, industry-grade building automation and Supervisory Control and Data Acquisition (SCADA) systems in an integrated, realistic, and reconfigurable environment capable of supporting attack-impact-detection-mitigation experimentation. In this paper, we articulate the need for research testbeds to model various B2G applications broadly by looking at the end-to-end operational hierarchy of the Smart Grid. Finally, the paper not only describes the architecture of the B2G testbed in detail, but also addresses the broad spectrum of B2G resilience research it is capable of supporting based on the smart grid operational hierarchy identified earlier.

NASA Robotic Neurosurgery Testbed

Science.gov (United States)

Mah, Robert

1997-01-01

The detection of tissue interface (e.g., normal tissue, cancer, tumor) has been limited clinically to tactile feedback, temperature monitoring, and the use of a miniature ultrasound probe for tissue differentiation during surgical operations, In neurosurgery, the needle used in the standard stereotactic CT or MRI guided brain biopsy provides no information about the tissue being sampled. The tissue sampled depends entirely upon the accuracy with which the localization provided by the preoperative CT or MRI scan is translated to the intracranial biopsy site. In addition, no information about the tissue being traversed by the needle (e.g., a blood vessel) is provided. Hemorrhage due to the biopsy needle tearing a blood vessel within the brain is the most devastating complication of stereotactic CT/MRI guided brain biopsy. A robotic neurosurgery testbed has been developed at NASA Ames Research Center as a spin-off of technologies from space, aeronautics and medical programs. The invention entitled "Robotic Neurosurgery Leading to Multimodality Devices for Tissue Identification" is nearing a state ready for commercialization. The devices will: 1) improve diagnostic accuracy and precision of general surgery, with near term emphasis on stereotactic brain biopsy, 2) automate tissue identification, with near term emphasis on stereotactic brain biopsy, to permit remote control of the procedure, and 3) reduce morbidity for stereotactic brain biopsy. The commercial impact from this work is the potential development of a whole new generation of smart surgical tools to increase the safety, accuracy and efficiency of surgical procedures. Other potential markets include smart surgical tools for tumor ablation in neurosurgery, general exploratory surgery, prostate cancer surgery, and breast cancer surgery.

A demonstration of remote survey and characterization of a buried waste site using the SRIP [Soldier Robot Interface Project] testbed

International Nuclear Information System (INIS)

Burks, B.L.; Richardson, B.S.; Armstrong, G.A.; Hamel, W.R.; Jansen, J.F.; Killough, S.M.; Thompson, D.H.; Emery, M.S.

1990-01-01

During FY 1990, the Oak Ridge National Laboratory (ORNL) supported the Department of Energy (DOE) Environmental Restoration and Waste Management (ER ampersand WM) Office of Technology Development through several projects including the development of a semiautonomous survey of a buried waste site using a remotely operated all-terrain robotic testbed borrowed from the US Army. The testbed was developed for the US Army's Human Engineering Laboratory (HEL) for the US Army's Soldier Robot Interface Project (SRIP). Initial development of the SRIP testbed was performed by a team including ORNL, HEL, Tooele Army Depot, and Odetics, Inc., as an experimental testbed for a variety of human factors issues related to military applications of robotics. The SRIP testbed was made available to the DOE and ORNL for the further development required for a remote landfill survey. The robot was modified extensively, equipped with environmental sensors, and used to demonstrate an automated remote survey of Solid Waste Storage Area No. 3 (SWSA 3) at ORNL on Tuesday, September 18, 1990. Burial trenches in this area containing contaminated materials were covered with soil nearly twenty years ago. This paper describes the SRIP testbed and work performed in FY 1990 to demonstrate a semiautonomous landfill survey at ORNL. 5 refs

On-wire lithography-generated molecule-based transport junctions: a new testbed for molecular electronics.

Science.gov (United States)

Chen, Xiaodong; Jeon, You-Moon; Jang, Jae-Won; Qin, Lidong; Huo, Fengwei; Wei, Wei; Mirkin, Chad A

2008-07-02

On-wire lithography (OWL) fabricated nanogaps are used as a new testbed to construct molecular transport junctions (MTJs) through the assembly of thiolated molecular wires across a nanogap formed between two Au electrodes. In addition, we show that one can use OWL to rapidly characterize a MTJ and optimize gap size for two molecular wires of different dimensions. Finally, we have used this new testbed to identify unusual temperature-dependent transport mechanisms for alpha,omega-dithiol terminated oligo(phenylene ethynylene).

Real-Time Simulation and Hardware-in-the-Loop Testbed for Distribution Synchrophasor Applications

Directory of Open Access Journals (Sweden)

Matthias Stifter

2018-04-01

Full Text Available With the advent of Distribution Phasor Measurement Units (D-PMUs and Micro-Synchrophasors (Micro-PMUs, the situational awareness in power distribution systems is going to the next level using time-synchronization. However, designing, analyzing, and testing of such accurate measurement devices are still challenging. Due to the lack of available knowledge and sufficient history for synchrophasors’ applications at the power distribution level, the realistic simulation, and validation environments are essential for D-PMU development and deployment. This paper presents a vendor agnostic PMU real-time simulation and hardware-in-the-Loop (PMU-RTS-HIL testbed, which helps in multiple PMUs validation and studies. The network of real and virtual PMUs was built in a full time-synchronized environment for PMU applications’ validation. The proposed testbed also includes an emulated communication network (CNS layer to replicate bandwidth, packet loss and collisions conditions inherent to the PMUs data streams’ issues. Experimental results demonstrate the flexibility and scalability of the developed PMU-RTS-HIL testbed by producing large amounts of measurements under typical normal and abnormal distribution grid operation conditions.

Segmented Aperture Interferometric Nulling Testbed (SAINT) II: component systems update

Science.gov (United States)

Hicks, Brian A.; Bolcar, Matthew R.; Helmbrecht, Michael A.; Petrone, Peter; Burke, Elliot; Corsetti, James; Dillon, Thomas; Lea, Andrew; Pellicori, Samuel; Sheets, Teresa; Shiri, Ron; Agolli, Jack; DeVries, John; Eberhardt, Andrew; McCabe, Tyler

2017-09-01

This work presents updates to the coronagraph and telescope components of the Segmented Aperture Interferometric Nulling Testbed (SAINT). The project pairs an actively-controlled macro-scale segmented mirror with the Visible Nulling Coronagraph (VNC) towards demonstrating capabilities for the future space observatories needed to directly detect and characterize a significant sample of Earth-sized worlds around nearby stars in the quest for identifying those which may be habitable and possibly harbor life. Efforts to improve the VNC wavefront control optics and mechanisms towards repeating narrowband results are described. A narrative is provided for the design of new optical components aimed at enabling broadband performance. Initial work with the hardware and software interface for controlling the segmented telescope mirror is also presented.

Torpedo and countermeasures modelling in the Torpedo Defence System Testbed

NARCIS (Netherlands)

Benders, F.P.A.; Witberg, R.R.; H.J. Grootendorst, H.J.

2002-01-01

Several years ago, TNO-FEL started the development of the Torpedo Defence System Testbed (TDSTB) based on the TORpedo SIMulation (TORSIM) model and the Maritime Operations Simulation and Evaluation System (MOSES). MOSES provides the simulation and modelling environment for the evaluation and

James Webb Space Telescope Optical Simulation Testbed: Segmented Mirror Phase Retrieval Testing

Science.gov (United States)

Laginja, Iva; Egron, Sylvain; Brady, Greg; Soummer, Remi; Lajoie, Charles-Philippe; Bonnefois, Aurélie; Long, Joseph; Michau, Vincent; Choquet, Elodie; Ferrari, Marc; Leboulleux, Lucie; Mazoyer, Johan; N’Diaye, Mamadou; Perrin, Marshall; Petrone, Peter; Pueyo, Laurent; Sivaramakrishnan, Anand

2018-01-01

The James Webb Space Telescope (JWST) Optical Simulation Testbed (JOST) is a hardware simulator designed to produce JWST-like images. A model of the JWST three mirror anastigmat is realized with three lenses in form of a Cooke Triplet, which provides JWST-like optical quality over a field equivalent to a NIRCam module, and an Iris AO segmented mirror with hexagonal elements is standing in for the JWST segmented primary. This setup successfully produces images extremely similar to NIRCam images from cryotesting in terms of the PSF morphology and sampling relative to the diffraction limit.The testbed is used for staff training of the wavefront sensing and control (WFS&C) team and for independent analysis of WFS&C scenarios of the JWST. Algorithms like geometric phase retrieval (GPR) that may be used in flight and potential upgrades to JWST WFS&C will be explored. We report on the current status of the testbed after alignment, implementation of the segmented mirror, and testing of phase retrieval techniques.This optical bench complements other work at the Makidon laboratory at the Space Telescope Science Institute, including the investigation of coronagraphy for segmented aperture telescopes. Beyond JWST we intend to use JOST for WFS&C studies for future large segmented space telescopes such as LUVOIR.

Evaluation of Unmanned Aircraft Systems (UAS) for Weather and Climate using the Multi-testbed approach

Science.gov (United States)

Baker, B.; Lee, T.; Buban, M.; Dumas, E. J.

2017-12-01

Evaluation of Unmanned Aircraft Systems (UAS) for Weather and Climate using the Multi-testbed approachC. Bruce Baker1, Ed Dumas1,2, Temple Lee1,2, Michael Buban1,21NOAA ARL, Atmospheric Turbulence and Diffusion Division, Oak Ridge, TN2Oak Ridge Associated Universities, Oak Ridge, TN The development of a small Unmanned Aerial System (sUAS) testbeds that can be used to validate, integrate, calibrate and evaluate new technology and sensors for routine boundary layer research, validation of operational weather models, improvement of model parameterizations, and recording observations within high-impact storms is important for understanding the importance and impact of using sUAS's routinely as a new observing platform. The goal of the multi-testbed approach is to build a robust set of protocols to assess the cost and operational feasibility of unmanned observations for routine applications using various combinations of sUAS aircraft and sensors in different locations and field experiments. All of these observational testbeds serve different community needs, but they also use a diverse suite of methodologies for calibration and evaluation of different sensors and platforms for severe weather and boundary layer research. The primary focus will be to evaluate meteorological sensor payloads to measure thermodynamic parameters and define surface characteristics with visible, IR, and multi-spectral cameras. This evaluation will lead to recommendations for sensor payloads for VTOL and fixed-wing sUAS.

Distributed computing testbed for a remote experimental environment

International Nuclear Information System (INIS)

Butner, D.N.; Casper, T.A.; Howard, B.C.; Henline, P.A.; Davis, S.L.; Barnes, D.

1995-01-01

Collaboration is increasing as physics research becomes concentrated on a few large, expensive facilities, particularly in magnetic fusion energy research, with national and international participation. These facilities are designed for steady state operation and interactive, real-time experimentation. We are developing tools to provide for the establishment of geographically distant centers for interactive operations; such centers would allow scientists to participate in experiments from their home institutions. A testbed is being developed for a Remote Experimental Environment (REE), a ''Collaboratory.'' The testbed will be used to evaluate the ability of a remotely located group of scientists to conduct research on the DIII-D Tokamak at General Atomics. The REE will serve as a testing environment for advanced control and collaboration concepts applicable to future experiments. Process-to-process communications over high speed wide area networks provide real-time synchronization and exchange of data among multiple computer networks, while the ability to conduct research is enhanced by adding audio/video communication capabilities. The Open Software Foundation's Distributed Computing Environment is being used to test concepts in distributed control, security, naming, remote procedure calls and distributed file access using the Distributed File Services. We are exploring the technology and sociology of remotely participating in the operation of a large scale experimental facility

Solar Resource Assessment with Sky Imagery and a Virtual Testbed for Sky Imager Solar Forecasting

Science.gov (United States)

Kurtz, Benjamin Bernard

In recent years, ground-based sky imagers have emerged as a promising tool for forecasting solar energy on short time scales (0 to 30 minutes ahead). Following the development of sky imager hardware and algorithms at UC San Diego, we present three new or improved algorithms for sky imager forecasting and forecast evaluation. First, we present an algorithm for measuring irradiance with a sky imager. Sky imager forecasts are often used in conjunction with other instruments for measuring irradiance, so this has the potential to decrease instrumentation costs and logistical complexity. In particular, the forecast algorithm itself often relies on knowledge of the current irradiance which can now be provided directly from the sky images. Irradiance measurements are accurate to within about 10%. Second, we demonstrate a virtual sky imager testbed that can be used for validating and enhancing the forecast algorithm. The testbed uses high-quality (but slow) simulations to produce virtual clouds and sky images. Because virtual cloud locations are known, much more advanced validation procedures are possible with the virtual testbed than with measured data. In this way, we are able to determine that camera geometry and non-uniform evolution of the cloud field are the two largest sources of forecast error. Finally, with the assistance of the virtual sky imager testbed, we develop improvements to the cloud advection model used for forecasting. The new advection schemes are 10-20% better at short time horizons.

M1 mirror print-through investigation and performance on the thermo-opto-mechanical testbed for the Space Interferometry Mission

Science.gov (United States)

Feria, V. Alfonso; Lam, Jonathan; Van Buren, Dave

2006-06-01

SIM PlanetQuest (SIM) is a large (9-meter baseline) space-borne optical interferometer that will determine the position and distance of stars to high accuracy. With microarcsecond measurements SIM will probe nearby stars for Earth-sized planets. To achieve this precision, SIM requires very tight manufacturing tolerances and high stability of optical components. To reduce technical risks, the SIM project developed an integrated thermal, mechanical and optical testbed (TOM3) to allow predictions of the system performance at the required high precision. The TOM3 testbed used full-scale brassboard optical components and picometer-class metrology to reach the SIM target performance levels. During the testbed integration and after one of the testbed mirrors, M1, was bonded into its mount, some surface distortion dimples that exceeded the optical specification were discovered. A detailed finite element model was used to analyze different load cases to try to determine the source of the M1 surface deformations. The same model was also used to compare with actual deformations due to varied thermal conditions on the TOM3 testbed. This paper presents the studies carried out to determine the source of the surface distortions on the M1 mirror as well as comparison and model validation during testing. This research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

Social media analytics and research testbed (SMART: Exploring spatiotemporal patterns of human dynamics with geo-targeted social media messages

Directory of Open Access Journals (Sweden)

Jiue-An Yang

2016-06-01

Full Text Available The multilevel model of meme diffusion conceptualizes how mediated messages diffuse over time and space. As a pilot application of implementing the meme diffusion, we developed the social media analytics and research testbed to monitor Twitter messages and track the diffusion of information in and across different cities and geographic regions. Social media analytics and research testbed is an online geo-targeted search and analytics tool, including an automatic data processing procedure at the backend and an interactive frontend user interface. Social media analytics and research testbed is initially designed to facilitate (1 searching and geo-locating tweet topics and terms in different cities and geographic regions; (2 filtering noise from raw data (such as removing redundant retweets and using machine learning methods to improve precision; (3 analyzing social media data from a spatiotemporal perspective; and (4 visualizing social media data in diagnostic ways (such as weekly and monthly trends, trend maps, top media, top retweets, top mentions, or top hashtags. Social media analytics and research testbed provides researchers and domain experts with a tool that can efficiently facilitate the refinement, formalization, and testing of research hypotheses or questions. Three case studies (flu outbreaks, Ebola epidemic, and marijuana legalization are introduced to illustrate how the predictions of meme diffusion can be examined and to demonstrate the potentials and key functions of social media analytics and research testbed.

Benchmarking Diagnostic Algorithms on an Electrical Power System Testbed

Science.gov (United States)

Kurtoglu, Tolga; Narasimhan, Sriram; Poll, Scott; Garcia, David; Wright, Stephanie

2009-01-01

Diagnostic algorithms (DAs) are key to enabling automated health management. These algorithms are designed to detect and isolate anomalies of either a component or the whole system based on observations received from sensors. In recent years a wide range of algorithms, both model-based and data-driven, have been developed to increase autonomy and improve system reliability and affordability. However, the lack of support to perform systematic benchmarking of these algorithms continues to create barriers for effective development and deployment of diagnostic technologies. In this paper, we present our efforts to benchmark a set of DAs on a common platform using a framework that was developed to evaluate and compare various performance metrics for diagnostic technologies. The diagnosed system is an electrical power system, namely the Advanced Diagnostics and Prognostics Testbed (ADAPT) developed and located at the NASA Ames Research Center. The paper presents the fundamentals of the benchmarking framework, the ADAPT system, description of faults and data sets, the metrics used for evaluation, and an in-depth analysis of benchmarking results obtained from testing ten diagnostic algorithms on the ADAPT electrical power system testbed.

The end-to-end testbed of the optical metrology system on-board LISA Pathfinder

Energy Technology Data Exchange (ETDEWEB)

Steier, F; Cervantes, F Guzman; Marin, A F GarcIa; Heinzel, G; Danzmann, K [Max-Planck-Institut fuer Gravitationsphysik (Albert-Einstein-Institut) and Universitaet Hannover (Germany); Gerardi, D, E-mail: frank.steier@aei.mpg.d [EADS Astrium Satellites GmbH, Friedrichshafen (Germany)

2009-05-07

LISA Pathfinder is a technology demonstration mission for the Laser Interferometer Space Antenna (LISA). The main experiment on-board LISA Pathfinder is the so-called LISA Technology Package (LTP) which has the aim to measure the differential acceleration between two free-falling test masses with an accuracy of 3 x 10{sup -14} ms{sup -2} Hz{sup -1/2} between 1 mHz and 30 mHz. This measurement is performed interferometrically by the optical metrology system (OMS) on-board LISA Pathfinder. In this paper, we present the development of an experimental end-to-end testbed of the entire OMS. It includes the interferometer and its sub-units, the interferometer backend which is a phasemeter and the processing of the phasemeter output data. Furthermore, three-axes piezo-actuated mirrors are used instead of the free-falling test masses for the characterization of the dynamic behaviour of the system and some parts of the drag-free and attitude control system (DFACS) which controls the test masses and the satellite. The end-to-end testbed includes all parts of the LTP that can reasonably be tested on earth without free-falling test masses. At its present status it consists mainly of breadboard components. Some of those have already been replaced by engineering models of the LTP experiment. In the next steps, further engineering and flight models will also be inserted in this testbed and tested against well-characterized breadboard components. The presented testbed is an important reference for the unit tests and can also be used for validation of the on-board experiment during the mission.

Design and construction of a 76m long-travel laser enclosure for a space occulter testbed

Science.gov (United States)

Galvin, Michael; Kim, Yunjong; Kasdin, N. Jeremy; Sirbu, Dan; Vanderbei, Robert; Echeverri, Dan; Sagolla, Giuseppe; Rousing, Andreas; Balasubramanian, Kunjithapatham; Ryan, Daniel; Shaklan, Stuart; Lisman, Doug

2016-07-01

Princeton University is upgrading our space occulter testbed. In particular, we are lengthening it to 76m to achieve flightlike Fresnel numbers. This much longer testbed required an all-new enclosure design. In this design, we prioritized modularity and the use of commercial off-the-shelf (COTS) and semi-COTS components. Several of the technical challenges encountered included an unexpected slow beam drift and black paint selection. Herein we describe the design and construction of this long-travel laser enclosure.

Development of optical packet and circuit integrated ring network testbed.

Science.gov (United States)

Furukawa, Hideaki; Harai, Hiroaki; Miyazawa, Takaya; Shinada, Satoshi; Kawasaki, Wataru; Wada, Naoya

2011-12-12

We developed novel integrated optical packet and circuit switch-node equipment. Compared with our previous equipment, a polarization-independent 4 × 4 semiconductor optical amplifier switch subsystem, gain-controlled optical amplifiers, and one 100 Gbps optical packet transponder and seven 10 Gbps optical path transponders with 10 Gigabit Ethernet (10GbE) client-interfaces were newly installed in the present system. The switch and amplifiers can provide more stable operation without equipment adjustments for the frequent polarization-rotations and dynamic packet-rate changes of optical packets. We constructed an optical packet and circuit integrated ring network testbed consisting of two switch nodes for accelerating network development, and we demonstrated 66 km fiber transmission and switching operation of multiplexed 14-wavelength 10 Gbps optical paths and 100 Gbps optical packets encapsulating 10GbE frames. Error-free (frame error rate optical packets of various packet lengths and packet rates, and stable operation of the network testbed was confirmed. In addition, 4K uncompressed video streaming over OPS links was successfully demonstrated. © 2011 Optical Society of America

The Orlando TDWR testbed and airborne wind shear date comparison results

Science.gov (United States)

Campbell, Steven; Berke, Anthony; Matthews, Michael

1992-01-01

The focus of this talk is on comparing terminal Doppler Weather Radar (TDWR) and airborne wind shear data in computing a microburst hazard index called the F factor. The TDWR is a ground-based system for detecting wind shear hazards to aviation in the terminal area. The Federal Aviation Administration will begin deploying TDWR units near 45 airports in late 1992. As part of this development effort, M.I.T. Lincoln Laboratory operates under F.A.A. support a TDWR testbed radar in Orlando, FL. During the past two years, a series of flight tests has been conducted with instrumented aircraft penetrating microburst events while under testbed radar surveillance. These tests were carried out with a Cessna Citation 2 aircraft operated by the University of North Dakota (UND) Center for Aerospace Sciences in 1990, and a Boeing 737 operated by NASA Langley Research Center in 1991. A large data base of approximately 60 instrumented microburst penetrations has been obtained from these flights.

Development of an Experimental Testbed for Research in Lithium-Ion Battery Management Systems

Directory of Open Access Journals (Sweden)

Mehdi Ferdowsi

2013-10-01

Full Text Available Advanced electrochemical batteries are becoming an integral part of a wide range of applications from household and commercial to smart grid, transportation, and aerospace applications. Among different battery technologies, lithium-ion (Li-ion batteries are growing more and more popular due to their high energy density, high galvanic potential, low self-discharge, low weight, and the fact that they have almost no memory effect. However, one of the main obstacles facing the widespread commercialization of Li-ion batteries is the design of reliable battery management systems (BMSs. An efficient BMS ensures electrical safety during operation, while increasing battery lifetime, capacity and thermal stability. Despite the need for extensive research in this field, the majority of research conducted on Li-ion battery packs and BMS are proprietary works conducted by manufacturers. The available literature, however, provides either general descriptions or detailed analysis of individual components of the battery system, and ignores addressing details of the overall system development. This paper addresses the development of an experimental research testbed for studying Li-ion batteries and their BMS design. The testbed can be configured in a variety of cell and pack architectures, allowing for a wide range of BMS monitoring, diagnostics, and control technologies to be tested and analyzed. General considerations that should be taken into account while designing Li-ion battery systems are reviewed and different technologies and challenges commonly encountered in Li-ion battery systems are investigated. This testbed facilitates future development of more practical and improved BMS technologies with the aim of increasing the safety, reliability, and efficiency of existing Li-ion battery systems. Experimental results of initial tests performed on the system are used to demonstrate some of the capabilities of the developed research testbed. To the authors�

An Overview of NASA's Subsonic Research Aircraft Testbed (SCRAT)

Science.gov (United States)

Baumann, Ethan; Hernandez, Joe; Ruhf, John C.

2013-01-01

National Aeronautics and Space Administration Dryden Flight Research Center acquired a Gulfstream III (GIII) aircraft to serve as a testbed for aeronautics flight research experiments. The aircraft is referred to as SCRAT, which stands for SubsoniC Research Aircraft Testbed. The aircraft's mission is to perform aeronautics research; more specifically raising the Technology Readiness Level (TRL) of advanced technologies through flight demonstrations and gathering high-quality research data suitable for verifying the technologies, and validating design and analysis tools. The SCRAT has the ability to conduct a range of flight research experiments throughout a transport class aircraft's flight envelope. Experiments ranging from flight-testing of a new aircraft system or sensor to those requiring structural and aerodynamic modifications to the aircraft can be accomplished. The aircraft has been modified to include an instrumentation system and sensors necessary to conduct flight research experiments along with a telemetry capability. An instrumentation power distribution system was installed to accommodate the instrumentation system and future experiments. An engineering simulation of the SCRAT has been developed to aid in integrating research experiments. A series of baseline aircraft characterization flights has been flown that gathered flight data to aid in developing and integrating future research experiments. This paper describes the SCRAT's research systems and capabilities.

Genetic Algorithm Phase Retrieval for the Systematic Image-Based Optical Alignment Testbed

Science.gov (United States)

Taylor, Jaime; Rakoczy, John; Steincamp, James

2003-01-01

Phase retrieval requires calculation of the real-valued phase of the pupil fimction from the image intensity distribution and characteristics of an optical system. Genetic 'algorithms were used to solve two one-dimensional phase retrieval problem. A GA successfully estimated the coefficients of a polynomial expansion of the phase when the number of coefficients was correctly specified. A GA also successfully estimated the multiple p h e s of a segmented optical system analogous to the seven-mirror Systematic Image-Based Optical Alignment (SIBOA) testbed located at NASA s Marshall Space Flight Center. The SIBOA testbed was developed to investigate phase retrieval techniques. Tiphilt and piston motions of the mirrors accomplish phase corrections. A constant phase over each mirror can be achieved by an independent tip/tilt correction: the phase Conection term can then be factored out of the Discrete Fourier Tranform (DFT), greatly reducing computations.

Design and Prototyping of a Satellite Antenna Slew Testbed

Science.gov (United States)

2013-12-01

beers and kind advice gave me a family away from home. To my familia here in the Bay Area; their constant support, understanding and surprise...Encoder Cable Maxon 275934 2 CAB 29 EPOS Power Cable Maxon 275829 2 CAB 30 Misc Hardware** NPS 30 - - Bill of Materials 35 closely match the actual ...computed trajectory. The position and velocity results were then implemented on the testbed motors for comparison of actual versus commanded values

Design of a low-power testbed for Wireless Sensor Networks and verification

NARCIS (Netherlands)

van Hoesel, L.F.W.; Dulman, S.O.; Havinga, Paul J.M.; Kip, Harry J.

In this document the design considerations and component choices of a testbed prototype device for wireless sensor networks will be discussed. These devices must be able to monitor their physical environment, process data and assist other nodes in forwarding sensor readings. For these tasks, five

TESTING THE APODIZED PUPIL LYOT CORONAGRAPH ON THE LABORATORY FOR ADAPTIVE OPTICS EXTREME ADAPTIVE OPTICS TESTBED

International Nuclear Information System (INIS)

Thomas, Sandrine J.; Dillon, Daren; Gavel, Donald; Soummer, Remi; Macintosh, Bruce; Sivaramakrishnan, Anand

2011-01-01

We present testbed results of the Apodized Pupil Lyot Coronagraph (APLC) at the Laboratory for Adaptive Optics (LAO). These results are part of the validation and tests of the coronagraph and of the Extreme Adaptive Optics (ExAO) for the Gemini Planet Imager (GPI). The apodizer component is manufactured with a halftone technique using black chrome microdots on glass. Testing this APLC (like any other coronagraph) requires extremely good wavefront correction, which is obtained to the 1 nm rms level using the microelectricalmechanical systems (MEMS) technology, on the ExAO visible testbed of the LAO at the University of Santa Cruz. We used an APLC coronagraph without central obstruction, both with a reference super-polished flat mirror and with the MEMS to obtain one of the first images of a dark zone in a coronagraphic image with classical adaptive optics using a MEMS deformable mirror (without involving dark hole algorithms). This was done as a complementary test to the GPI coronagraph testbed at American Museum of Natural History, which studied the coronagraph itself without wavefront correction. Because we needed a full aperture, the coronagraph design is very different from the GPI design. We also tested a coronagraph with central obstruction similar to that of GPI. We investigated the performance of the APLC coronagraph and more particularly the effect of the apodizer profile accuracy on the contrast. Finally, we compared the resulting contrast to predictions made with a wavefront propagation model of the testbed to understand the effects of phase and amplitude errors on the final contrast.

Aerospace Engineering Systems and the Advanced Design Technologies Testbed Experience

Science.gov (United States)

VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

1999-01-01

Continuous improvement of aerospace product development processes is a driving requirement across much of the aerospace community. As up to 90% of the cost of an aerospace product is committed during the first 10% of the development cycle, there is a strong emphasis on capturing, creating, and communicating better information (both requirements and performance) early in the product development process. The community has responded by pursuing the development of computer-based systems designed to enhance the decision-making capabilities of product development individuals and teams. Recently, the historical foci on sharing the geometrical representation and on configuration management are being augmented: 1) Physics-based analysis tools for filling the design space database; 2) Distributed computational resources to reduce response time and cost; 3) Web-based technologies to relieve machine-dependence; and 4) Artificial intelligence technologies to accelerate processes and reduce process variability. The Advanced Design Technologies Testbed (ADTT) activity at NASA Ames Research Center was initiated to study the strengths and weaknesses of the technologies supporting each of these trends, as well as the overall impact of the combination of these trends on a product development event. Lessons learned and recommendations for future activities are reported.

BEATBOX v1.0: Background Error Analysis Testbed with Box Models

Science.gov (United States)

Knote, Christoph; Barré, Jérôme; Eckl, Max

2018-02-01

The Background Error Analysis Testbed (BEATBOX) is a new data assimilation framework for box models. Based on the BOX Model eXtension (BOXMOX) to the Kinetic Pre-Processor (KPP), this framework allows users to conduct performance evaluations of data assimilation experiments, sensitivity analyses, and detailed chemical scheme diagnostics from an observation simulation system experiment (OSSE) point of view. The BEATBOX framework incorporates an observation simulator and a data assimilation system with the possibility of choosing ensemble, adjoint, or combined sensitivities. A user-friendly, Python-based interface allows for the tuning of many parameters for atmospheric chemistry and data assimilation research as well as for educational purposes, for example observation error, model covariances, ensemble size, perturbation distribution in the initial conditions, and so on. In this work, the testbed is described and two case studies are presented to illustrate the design of a typical OSSE experiment, data assimilation experiments, a sensitivity analysis, and a method for diagnosing model errors. BEATBOX is released as an open source tool for the atmospheric chemistry and data assimilation communities.

BEATBOX v1.0: Background Error Analysis Testbed with Box Models

Directory of Open Access Journals (Sweden)

C. Knote

2018-02-01

Full Text Available The Background Error Analysis Testbed (BEATBOX is a new data assimilation framework for box models. Based on the BOX Model eXtension (BOXMOX to the Kinetic Pre-Processor (KPP, this framework allows users to conduct performance evaluations of data assimilation experiments, sensitivity analyses, and detailed chemical scheme diagnostics from an observation simulation system experiment (OSSE point of view. The BEATBOX framework incorporates an observation simulator and a data assimilation system with the possibility of choosing ensemble, adjoint, or combined sensitivities. A user-friendly, Python-based interface allows for the tuning of many parameters for atmospheric chemistry and data assimilation research as well as for educational purposes, for example observation error, model covariances, ensemble size, perturbation distribution in the initial conditions, and so on. In this work, the testbed is described and two case studies are presented to illustrate the design of a typical OSSE experiment, data assimilation experiments, a sensitivity analysis, and a method for diagnosing model errors. BEATBOX is released as an open source tool for the atmospheric chemistry and data assimilation communities.

A commercial space technology testbed on ISS

Science.gov (United States)

Boyle, David R.

2000-01-01

There is a significant and growing commercial market for new, more capable communications and remote sensing satellites. Competition in this market strongly motivates satellite manufacturers and spacecraft component developers to test and demonstrate new space hardware in a realistic environment. External attach points on the International Space Station allow it to function uniquely as a space technology testbed to satisfy this market need. However, space industry officials have identified three critical barriers to their commercial use of the ISS: unpredictable access, cost risk, and schedule uncertainty. Appropriate NASA policy initiatives and business/technical assistance for industry from the Commercial Space Center for Engineering can overcome these barriers. .

A technical description of the FlexHouse Project Testbed

DEFF Research Database (Denmark)

Sørensen, Jens Otto

2000-01-01

This paper describes the FlexHouse project testbed; a server dedicated to experiments within the FlexHouse project. The FlexHouse project is a project originating from The Business Computing Research Group at The Aarhus School of Business. The purpose of the project is to identify and develop...... methods that satisfy the following three requirements. Flexibility with respect to evolving data sources. Flexibility with respect to change of information needs. Efficiency with respect to view management....

Testbed for a LiFi system integrated in streetlights

OpenAIRE

Monzón Baeza, Victor; Sánchez Fernández, Matilde Pilar; García-Armada, Ana; Royo, A.

2015-01-01

Proceeding at: 2015 European Conference on Networks and Communications (EuCNC) took place June 29 - July 2 in Paris, France. In this paper, a functional LiFi real-time testbed implemented on FPGAs is presented. The setup evaluates the performance of our design in a downlink scenario where the transmitter is embedded on the streetlights and a mobile phone’s camera is used as receiver, therefore achieving the goal of lighting and communicating simultaneously. To validate the ...

PlanetLab Europe as Geographically-Distributed Testbed for Software Development and Evaluation

Directory of Open Access Journals (Sweden)

Dan Komosny

2015-01-01

Full Text Available In this paper, we analyse the use of PlanetLab Europe for development and evaluation of geographically-oriented Internet services. PlanetLab is a global research network with the main purpose to support development of new Internet services and protocols. PlanetLab is divided into several branches; one of them is PlanetLab Europe. PlanetLab Europe consists of about 350 nodes at 150 geographically different sites. The nodes are accessible by remote login, and the users can run their software on the nodes. In the paper, we study the PlanetLab's properties that are significant for its use as a geographically distributed testbed. This includes node position accuracy, services availability and stability. We find a considerable number of location inaccuracies and a number of services that cannot be considered as reliable. Based on the results we propose a simple approach to nodes selection in testbeds for geographically-oriented Internet services development and evaluation.

Sensing across large-scale cognitive radio networks: Data processing, algorithms, and testbed for wireless tomography and moving target tracking

Science.gov (United States)

Bonior, Jason David

As the use of wireless devices has become more widespread so has the potential for utilizing wireless networks for remote sensing applications. Regular wireless communication devices are not typically designed for remote sensing. Remote sensing techniques must be carefully tailored to the capabilities of these networks before they can be applied. Experimental verification of these techniques and algorithms requires robust yet flexible testbeds. In this dissertation, two experimental testbeds for the advancement of research into sensing across large-scale cognitive radio networks are presented. System architectures, implementations, capabilities, experimental verification, and performance are discussed. One testbed is designed for the collection of scattering data to be used in RF and wireless tomography research. This system is used to collect full complex scattering data using a vector network analyzer (VNA) and amplitude-only data using non-synchronous software-defined radios (SDRs). Collected data is used to experimentally validate a technique for phase reconstruction using semidefinite relaxation and demonstrate the feasibility of wireless tomography. The second testbed is a SDR network for the collection of experimental data. The development of tools for network maintenance and data collection is presented and discussed. A novel recursive weighted centroid algorithm for device-free target localization using the variance of received signal strength for wireless links is proposed. The signal variance resulting from a moving target is modeled as having contours related to Cassini ovals. This model is used to formulate recursive weights which reduce the influence of wireless links that are farther from the target location estimate. The algorithm and its implementation on this testbed are presented and experimental results discussed.

A Logic Programming Testbed for Inductive Thought and Specification.

Science.gov (United States)

Neff, Norman D.

This paper describes applications of logic programming technology to the teaching of the inductive method in computer science and mathematics. It discusses the nature of inductive thought and its place in those fields of inquiry, arguing that a complete logic programming system for supporting inductive inference is not only feasible but necessary.…

Accelerating Innovation that Enhances Resource Recovery in the Wastewater Sector: Advancing a National Testbed Network.

Science.gov (United States)

Mihelcic, James R; Ren, Zhiyong Jason; Cornejo, Pablo K; Fisher, Aaron; Simon, A J; Snyder, Seth W; Zhang, Qiong; Rosso, Diego; Huggins, Tyler M; Cooper, William; Moeller, Jeff; Rose, Bob; Schottel, Brandi L; Turgeon, Jason

2017-07-18

This Feature examines significant challenges and opportunities to spur innovation and accelerate adoption of reliable technologies that enhance integrated resource recovery in the wastewater sector through the creation of a national testbed network. The network is a virtual entity that connects appropriate physical testing facilities, and other components needed for a testbed network, with researchers, investors, technology providers, utilities, regulators, and other stakeholders to accelerate the adoption of innovative technologies and processes that are needed for the water resource recovery facility of the future. Here we summarize and extract key issues and developments, to provide a strategy for the wastewater sector to accelerate a path forward that leads to new sustainable water infrastructures.

An Approach for Smart Antenna Testbed

Science.gov (United States)

Kawitkar, R. S.; Wakde, D. G.

2003-07-01

The use of wireless, mobile, personal communications services are expanding rapidly. Adaptive or "Smart" antenna arrays can increase channel capacity through spatial division. Adaptive antennas can also track mobile users, improving both signal range and quality. For these reasons, smart antenna systems have attracted widespread interest in the telecommunications industry for applications to third generation wireless systems.This paper aims to design and develop an advanced antennas testbed to serve as a common reference for testing adaptive antenna arrays and signal combining algorithms, as well as complete systems. A flexible suite of off line processing software should be written using matlab to perform system calibration, test bed initialization, data acquisition control, data storage/transfer, off line signal processing and analysis and graph plotting. The goal of this paper is to develop low complexity smart antenna structures for 3G systems. The emphasis will be laid on ease of implementation in a multichannel / multi-user environment. A smart antenna test bed will be developed, and various state-of-the-art DSP structures and algorithms will be investigated.Facing the soaring demand for mobile communications, the use of smart antenna arrays in mobile communications systems to exploit spatial diversity to further improve spectral efficiency has recently received considerable attention. Basically, a smart antenna array comprises a number of antenna elements combined via a beamforming network (amplitude and phase control network). Some of the benefits that can be achieved by using SAS (Smart Antenna System) include lower mobile terminal power consumption, range extension, ISI reduction, higher data rate support, and ease of integration into the existing base station system. In terms of economic benefits, adaptive antenna systems employed at base station, though increases the per base station cost, can increase coverage area of each cell site, thereby reducing

A Testbed to Evaluate the FIWARE-Based IoT Platform in the Domain of Precision Agriculture

Science.gov (United States)

Martínez, Ramón; Pastor, Juan Ángel; Álvarez, Bárbara; Iborra, Andrés

2016-01-01

Wireless sensor networks (WSNs) represent one of the most promising technologies for precision farming. Over the next few years, a significant increase in the use of such systems on commercial farms is expected. WSNs present a number of problems, regarding scalability, interoperability, communications, connectivity with databases and data processing. Different Internet of Things middleware is appearing to overcome these challenges. This paper checks whether one of these middleware, FIWARE, is suitable for the development of agricultural applications. To the authors’ knowledge, there are no works that show how to use FIWARE in precision agriculture and study its appropriateness, its scalability and its efficiency for this kind of applications. To do this, a testbed has been designed and implemented to simulate different deployments and load conditions. The testbed is a typical FIWARE application, complete, yet simple and comprehensible enough to show the main features and components of FIWARE, as well as the complexity of using this technology. Although the testbed has been deployed in a laboratory environment, its design is based on the analysis of an Internet of Things use case scenario in the domain of precision agriculture. PMID:27886091

Development and experimentation of an eye/brain/task testbed

Science.gov (United States)

Harrington, Nora; Villarreal, James

1987-01-01

The principal objective is to develop a laboratory testbed that will provide a unique capability to elicit, control, record, and analyze the relationship of operator task loading, operator eye movement, and operator brain wave data in a computer system environment. The ramifications of an integrated eye/brain monitor to the man machine interface are staggering. The success of such a system would benefit users of space and defense, paraplegics, and the monitoring of boring screens (nuclear power plants, air defense, etc.)

The University of Canberra quantum key distribution testbed

International Nuclear Information System (INIS)

Ganeshkumar, G.; Edwards, P.J.; Cheung, W.N.; Barbopoulos, L.O.; Pham, H.; Hazel, J.C.

1999-01-01

Full text: We describe the design, operation and preliminary results obtained from a quantum key distribution (QKD) testbed constructed at the University of Canberra. Quantum cryptographic systems use shared secret keys exchanged in the form of sequences of polarisation coded or phase encoded single photons transmitted over an optical communications channel. Secrecy of this quantum key rests upon fundamental laws of quantum physics: measurements of linear or circular photon polarisation states introduce noise into the conjugate variable and so reveal eavesdropping. In its initial realisation reported here, pulsed light from a 650nm laser diode is attenuated by a factor of 10 6 , plane-polarised and then transmitted through a birefringent liquid crystal modulator (LCM) to a polarisation sensitive single photon receiver. This transmitted key sequence consists of a 1 kHz train of weak coherent 100ns wide light pulses, polarisation coded according to the BB84 protocol. Each pulse is randomly assigned one of four polarisation states (two orthogonal linear and two orthogonal circular) by computer PCA operated by the sender ('Alice'). This quaternary polarisation shift keyed photon stream is detected by the receiver ('Bob') whose computer (PCB) randomly chooses either a linear or a circular polarisation basis. Computer PCB is also used for final key selection, authentication, privacy amplification and eavesdropping. We briefly discuss the realisation of a mesoscopic single photon QKD source and the use of the testbed to simulate a global quantum key distribution system using earth satellites. Copyright (1999) Australian Optical Society

Vacuum Nuller Testbed Performance, Characterization and Null Control

Science.gov (United States)

Lyon, R. G.; Clampin, M.; Petrone, P.; Mallik, U.; Madison, T.; Bolcar, M.; Noecker, C.; Kendrick, S.; Helmbrecht, M. A.

2011-01-01

The Visible Nulling Coronagraph (VNC) can detect and characterize exoplanets with filled, segmented and sparse aperture telescopes, thereby spanning the choice of future internal coronagraph exoplanet missions. NASA/Goddard Space Flight Center (GSFC) has developed a Vacuum Nuller Testbed (VNT) to advance this approach, and assess and advance technologies needed to realize a VNC as a flight instrument. The VNT is an ultra-stable testbed operating at 15 Hz in vacuum. It consists of a MachZehnder nulling interferometer; modified with a "W" configuration to accommodate a hexpacked MEMS based deformable mirror (DM), coherent fiber bundle and achromatic phase shifters. The 2-output channels are imaged with a vacuum photon counting camera and conventional camera. Error-sensing and feedback to DM and delay line with control algorithms are implemented in a real-time architecture. The inherent advantage of the VNC is that it is its own interferometer and directly controls its errors by exploiting images from bright and dark channels simultaneously. Conservation of energy requires the sum total of the photon counts be conserved independent of the VNC state. Thus sensing and control bandwidth is limited by the target stars throughput, with the net effect that the higher bandwidth offloads stressing stability tolerances within the telescope. We report our recent progress with the VNT towards achieving an incremental sequence of contrast milestones of 10(exp 8) , 10(exp 9) and 10(exp 10) respectively at inner working angles approaching 2A/D. Discussed will be the optics, lab results, technologies, and null control. Shown will be evidence that the milestones have been achieved.

The CMS Integration Grid Testbed

CERN Document Server

Graham, G E; Aziz, Shafqat; Bauerdick, L.A.T.; Ernst, Michael; Kaiser, Joseph; Ratnikova, Natalia; Wenzel, Hans; Wu, Yu-jun; Aslakson, Erik; Bunn, Julian; Iqbal, Saima; Legrand, Iosif; Newman, Harvey; Singh, Suresh; Steenberg, Conrad; Branson, James; Fisk, Ian; Letts, James; Arbree, Adam; Avery, Paul; Bourilkov, Dimitri; Cavanaugh, Richard; Rodriguez, Jorge Luis; Kategari, Suchindra; Couvares, Peter; DeSmet, Alan; Livny, Miron; Roy, Alain; Tannenbaum, Todd; Graham, Gregory E.; Aziz, Shafqat; Ernst, Michael; Kaiser, Joseph; Ratnikova, Natalia; Wenzel, Hans; Wu, Yujun; Aslakson, Erik; Bunn, Julian; Iqbal, Saima; Legrand, Iosif; Newman, Harvey; Singh, Suresh; Steenberg, Conrad; Branson, James; Fisk, Ian; Letts, James; Arbree, Adam; Avery, Paul; Bourilkov, Dimitri; Cavanaugh, Richard; Rodriguez, Jorge; Kategari, Suchindra; Couvares, Peter; Smet, Alan De; Livny, Miron; Roy, Alain; Tannenbaum, Todd

2003-01-01

The CMS Integration Grid Testbed (IGT) comprises USCMS Tier-1 and Tier-2 hardware at the following sites: the California Institute of Technology, Fermi National Accelerator Laboratory, the University of California at San Diego, and the University of Florida at Gainesville. The IGT runs jobs using the Globus Toolkit with a DAGMan and Condor-G front end. The virtual organization (VO) is managed using VO management scripts from the European Data Grid (EDG). Gridwide monitoring is accomplished using local tools such as Ganglia interfaced into the Globus Metadata Directory Service (MDS) and the agent based Mona Lisa. Domain specific software is packaged and installed using the Distrib ution After Release (DAR) tool of CMS, while middleware under the auspices of the Virtual Data Toolkit (VDT) is distributed using Pacman. During a continuo us two month span in Fall of 2002, over 1 million official CMS GEANT based Monte Carlo events were generated and returned to CERN for analysis while being demonstrated at SC2002. ...

CanOpen on RASTA: The Integration of the CanOpen IP Core in the Avionics Testbed

Science.gov (United States)

Furano, Gianluca; Guettache, Farid; Magistrati, Giorgio; Tiotto, Gabriele; Ortega, Carlos Urbina; Valverde, Alberto

2013-08-01

This paper presents the work done within the ESA Estec Data Systems Division, targeting the integration of the CanOpen IP Core with the existing Reference Architecture Test-bed for Avionics (RASTA). RASTA is the reference testbed system of the ESA Avionics Lab, designed to integrate the main elements of a typical Data Handling system. It aims at simulating a scenario where a Mission Control Center communicates with on-board computers and systems through a TM/TC link, thus providing the data management through qualified processors and interfaces such as Leon2 core processors, CAN bus controllers, MIL-STD-1553 and SpaceWire. This activity aims at the extension of the RASTA with two boards equipped with HurriCANe controller, acting as CANOpen slaves. CANOpen software modules have been ported on the RASTA system I/O boards equipped with Gaisler GR-CAN controller and acts as master communicating with the CCIPC boards. CanOpen serves as upper application layer for based on CAN defined within the CAN-in-Automation standard and can be regarded as the definitive standard for the implementation of CAN-based systems solutions. The development and integration of CCIPC performed by SITAEL S.p.A., is the first application that aims to bring the CANOpen standard for space applications. The definition of CANOpen within the European Cooperation for Space Standardization (ECSS) is under development.

Cooperating expert systems for Space Station - Power/thermal subsystem testbeds

Science.gov (United States)

Wong, Carla M.; Weeks, David J.; Sundberg, Gale R.; Healey, Kathleen L.; Dominick, Jeffrey S.

1988-01-01

The Systems Autonomy Demonstration Project (SADP) is a NASA-sponsored series of increasingly complex demonstrations to show the benefits of integrating knowledge-based systems with conventional process control in real-time, real-world problem domains that can facilitate the operations and availability of major Space Station distributed systems. This paper describes the system design, objectives, approaches, and status of each of the testbed knowledge-based systems. Simplified schematics of the systems are shown.

Results from a multi aperture Fizeau interferometer ground testbed: demonstrator for a future space-based interferometer

Science.gov (United States)

Baccichet, Nicola; Caillat, Amandine; Rakotonimbahy, Eddy; Dohlen, Kjetil; Savini, Giorgio; Marcos, Michel

2016-08-01

In the framework of the European FP7-FISICA (Far Infrared Space Interferometer Critical Assessment) program, we developed a miniaturized version of the hyper-telescope to demonstrate multi-aperture interferometry on ground. This setup would be ultimately integrated into a CubeSat platform, therefore providing the first real demonstrator of a multi aperture Fizeau interferometer in space. In this paper, we describe the optical design of the ground testbed and the data processing pipeline implemented to reconstruct the object image from interferometric data. As a scientific application, we measured the Sun diameter by fitting a limb-darkening model to our data. Finally, we present the design of a CubeSat platform carrying this miniature Fizeau interferometer, which could be used to monitor the Sun diameter over a long in-orbit period.

Adaptive Coding and Modulation Experiment With NASA's Space Communication and Navigation Testbed

Science.gov (United States)

Downey, Joseph; Mortensen, Dale; Evans, Michael; Briones, Janette; Tollis, Nicholas

2016-01-01

National Aeronautics and Space Administration (NASA)'s Space Communication and Navigation Testbed is an advanced integrated communication payload on the International Space Station. This paper presents results from an adaptive coding and modulation (ACM) experiment over S-band using a direct-to-earth link between the SCaN Testbed and the Glenn Research Center. The testing leverages the established Digital Video Broadcasting Second Generation (DVB-S2) standard to provide various modulation and coding options, and uses the Space Data Link Protocol (Consultative Committee for Space Data Systems (CCSDS) standard) for the uplink and downlink data framing. The experiment was conducted in a challenging environment due to the multipath and shadowing caused by the International Space Station structure. Several approaches for improving the ACM system are presented, including predictive and learning techniques to accommodate signal fades. Performance of the system is evaluated as a function of end-to-end system latency (round-trip delay), and compared to the capacity of the link. Finally, improvements over standard NASA waveforms are presented.

Static and dynamic optimization of CAPE problems using a Model Testbed

DEFF Research Database (Denmark)

This paper presents a new computer aided tool for setting up and solving CAPE related static and dynamic optimisation problems. The Model Testbed (MOT) offers an integrated environment for setting up and solving a very large range of CAPE problems, including complex optimisation problems...... and dynamic optimisation, and how interfacing of solvers and seamless information flow can lead to more efficient solution of process design problems....

The CCPP-ARM Parameterization Testbed (CAPT): Where Climate Simulation Meets Weather Prediction

Energy Technology Data Exchange (ETDEWEB)

Phillips, T J; Potter, G L; Williamson, D L; Cederwall, R T; Boyle, J S; Fiorino, M; Hnilo, J J; Olson, J G; Xie, S; Yio, J J

2003-11-21

To significantly improve the simulation of climate by general circulation models (GCMs), systematic errors in representations of relevant processes must first be identified, and then reduced. This endeavor demands, in particular, that the GCM parameterizations of unresolved processes should be tested over a wide range of time scales, not just in climate simulations. Thus, a numerical weather prediction (NWP) methodology for evaluating model parameterizations and gaining insights into their behavior may prove useful, provied that suitable adaptations are made for implementation in climate GCMs. This method entails the generation of short-range weather forecasts by realistically initialized climate GCM, and the application of six-hourly NWP analyses and observations of parameterized variables to evaluate these forecasts. The behavior of the parameterizations in such a weather-forecasting framework can provide insights on how these schemes might be improved, and modified parameterizations then can be similarly tested. In order to further this method for evaluating and analyzing parameterizations in climate GCMs, the USDOE is funding a joint venture of its Climate Change Prediction Program (CCPP) and Atmospheric Radiation Measurement (ARM) Program: the CCPP-ARM Parameterization Testbed (CAPT). This article elaborates the scientific rationale for CAPT, discusses technical aspects of its methodology, and presents examples of its implementation in a representative climate GCM. Numerical weather prediction methods show promise for improving parameterizations in climate GCMs.

First light of an external occulter testbed at flight Fresnel numbers

Science.gov (United States)

Kim, Yunjong; Sirbu, Dan; Hu, Mia; Kasdin, Jeremy; Vanderbei, Robert J.; Harness, Anthony; Shaklan, Stuart

2017-01-01

Many approaches have been suggested over the last couple of decades for imaging Earth-like planets. One of the main candidates for creating high-contrast for future Earth-like planets detection is an external occulter. The external occulter is a spacecraft flown along the line-of-sight of a space telescope to suppress starlight and enable high-contrast direct imaging of exoplanets. The occulter is typically tens of meters in diameter and the separation from the telescope is of the order of tens of thousands of kilometers. Optical testing of a full-scale external occulter on the ground is impossible because of the long separations. Therefore, laboratory verification of occulter designs is necessary to validate the optical models used to design and predict occulter performance. At Princeton, we have designed and built a testbed that allows verification of scaled occulter designs whose suppressed shadow is mathematically identical to that of space occulters. The goal of this experiment is to demonstrate a pupil plane suppression of better than 1e-9 with a corresponding image plane contrast of better than 1e-11. The occulter testbed uses a 77.2 m optical propagation distance to realize the flight Fresnel number of 14.5. The scaled mask is placed at 27.2 m from the artificial source and the camera is located 50.0 m from the scaled mask. We will use an etched silicon mask, manufactured by the Microdevices Lab(MDL) of the Jet Propulsion Laboratory(JPL), as the occulter. Based on conversations with MDL, we expect that 0.5 μm feature size is an achievable resolution in the mask manufacturing process and is therefore likely the indicator of the best possible performance. The occulter is illuminated by a diverging laser beam to reduce the aberrations from the optics before the occulter. Here, we present first light result of a sample design operating at a flight Fresnel number and the experimental setup of the testbed. We compare the experimental results with simulations

Safe Active Scanning for Energy Delivery Systems Final Report

Energy Technology Data Exchange (ETDEWEB)

Helms, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Salazar, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Scheibel, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Engels, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reiger, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-30

The Department of Energy’s Cybersecurity for Energy Delivery Systems Program has funded Safe(r) Active Scanning for Energy Delivery Systems, led by Lawrence Livermore National Laboratory, to investigate and analyze the impacts of active scanning in the operational environment of energy delivery systems. In collaboration with Pacific Northwest National Laboratory and Idaho National Laboratory, active scans across three testbeds including 38 devices were performed. This report gives a summary of the initial literature survey performed on the SASEDS project as well as industry partner interview summaries and main findings from Phase 1 of the project. Additionally, the report goes into the details of scanning techniques, methodologies for testing, testbed descriptions, and scanning results, with appendices to elaborate on the specific scans that were performed. As a result of testing, a single device out of 38 exhibited problems when actively scanned, and a reboot was required to fix it. This single failure indicates that active scanning is not likely to have a detrimental effect on the safety and resilience of energy delivery systems. We provide a path forward for future research that could enable wide adoption of active scanning and lead utilities to incorporate active scanning as part of their default network security plans to discover and rectify rogue devices, adversaries, and services that may be on the network. This increased network visibility will allow operational technology cybersecurity practitioners to improve their situational awareness of networks and their vulnerabilities.

EPIC: A Testbed for Scientifically Rigorous Cyber-Physical Security Experimentation

OpenAIRE

SIATERLIS CHRISTOS; GENGE BELA; HOHENADEL MARC

2013-01-01

Recent malware, like Stuxnet and Flame, constitute a major threat to Networked Critical Infrastructures (NCIs), e.g., power plants. They revealed several vulnerabilities in today's NCIs, but most importantly they highlighted the lack of an efficient scientific approach to conduct experiments that measure the impact of cyber threats on both the physical and the cyber parts of NCIs. In this paper we present EPIC, a novel cyber-physical testbed and a modern scientific instrument that can pr...

Development of a Remotely Operated Vehicle Test-bed

Directory of Open Access Journals (Sweden)

Biao WANG

2013-06-01

Full Text Available This paper presents the development of a remotely operated vehicle (ROV, designed to serve as a convenient, cost-effective platform for research and experimental validation of hardware, sensors and control algorithms. Both of the mechanical and control system design are introduced. The vehicle with a dimension 0.65 m long, 0.45 m wide has been designed to have a frame structure for modification of mounted devices and thruster allocation. For control system, STM32 based MCU boards specially designed for this project, are used as core processing boards. And an open source, modular, flexible software is developed. Experiment results demonstrate the effectiveness of the test-bed.

Testbed diversity as a fundamental principle for effective ICS security research

OpenAIRE

Green, Benjamin; Frey, Sylvain Andre Francis; Rashid, Awais; Hutchison, David

2016-01-01

The implementation of diversity in testbeds is essential to understanding and improving the security and resilience of Industrial Control Systems (ICS). Employing a wide spec- trum of equipment, diverse networks, and business processes, as deployed in real-life infrastructures, is particularly diffi- cult in experimental conditions. However, this level of di- versity is key from a security perspective, as attackers can exploit system particularities and process intricacies to their advantage....

Oceanic Platform of the Canary Islands: an ocean testbed for ocean energy converters

Science.gov (United States)

González, Javier; Hernández-Brito, Joaquín.; Llinás, Octavio

2010-05-01

The Oceanic Platform of the Canary Islands (PLOCAN) is a Governmental Consortium aimed to build and operate an off-shore infrastructure to facilitate the deep sea research and speed up the technology associated. This Consortium is overseen by the Spanish Ministry of Science and Innovation and the Canarian Agency for Research and Innovation. The infrastructure consists of an oceanic platform located in an area with depths between 50-100 meters, close to the continental slope and four kilometers off the coast of Gran Canaria, in the archipelago of the Canary Islands. The process of construction will start during the first months of 2010 and is expected to be finished in mid-year 2011. PLOCAN serves five strategic lines: an integral observatory able to explore from the deep ocean to the atmosphere, an ocean technology testbed, a base for underwater vehicles, an innovation platform and a highly specialized training centre. Ocean energy is a suitable source to contribute the limited mix-energy conformed in the archipelago of the Canary Islands with a total population around 2 million people unequally distributed in seven islands. Islands of Gran Canaria and Tenerife support the 80% of the total population with 800.000 people each. PLOCAN will contribute to develop the ocean energy sector establishing a marine testbed allowing prototypes testing at sea under a meticulous monitoring network provided by the integral observatory, generating valuable information to developers. Reducing costs throughout an integral project management is an essential objective to be reach, providing services such as transportation, customs and administrative permits. Ocean surface for testing activities is around 8 km2 with a depth going from 50 to 100 meters, 4km off the coast. Selected areas for testing have off-shore wind power conditions around 500-600 W/m2 and wave power conditions around 6 kW/m in the East coast and 10 kW/m in the North coast. Marine currents in the Canary Islands are

The CMS integration grid testbed

Energy Technology Data Exchange (ETDEWEB)

Graham, Gregory E.

2004-08-26

The CMS Integration Grid Testbed (IGT) comprises USCMS Tier-1 and Tier-2 hardware at the following sites: the California Institute of Technology, Fermi National Accelerator Laboratory, the University of California at San Diego, and the University of Florida at Gainesville. The IGT runs jobs using the Globus Toolkit with a DAGMan and Condor-G front end. The virtual organization (VO) is managed using VO management scripts from the European Data Grid (EDG). Gridwide monitoring is accomplished using local tools such as Ganglia interfaced into the Globus Metadata Directory Service (MDS) and the agent based Mona Lisa. Domain specific software is packaged and installed using the Distribution After Release (DAR) tool of CMS, while middleware under the auspices of the Virtual Data Toolkit (VDT) is distributed using Pacman. During a continuous two month span in Fall of 2002, over 1 million official CMS GEANT based Monte Carlo events were generated and returned to CERN for analysis while being demonstrated at SC2002. In this paper, we describe the process that led to one of the world's first continuously available, functioning grids.

A Monocular Vision Measurement System of Three-Degree-of-Freedom Air-Bearing Test-Bed Based on FCCSP

Science.gov (United States)

Gao, Zhanyu; Gu, Yingying; Lv, Yaoyu; Xu, Zhenbang; Wu, Qingwen

2018-06-01

A monocular vision-based pose measurement system is provided for real-time measurement of a three-degree-of-freedom (3-DOF) air-bearing test-bed. Firstly, a circular plane cooperative target is designed. An image of a target fixed on the test-bed is then acquired. Blob analysis-based image processing is used to detect the object circles on the target. A fast algorithm (FCCSP) based on pixel statistics is proposed to extract the centers of object circles. Finally, pose measurements can be obtained when combined with the centers and the coordinate transformation relation. Experiments show that the proposed method is fast, accurate, and robust enough to satisfy the requirement of the pose measurement.

Creative thinking of design and redesign on SEAT aircraft cabin testbed: a case study

NARCIS (Netherlands)

Tan, C.F.; Chen, W.; Rauterberg, G.W.M.

2009-01-01

this paper, the intuition approach in the design and redesign of the environmental friendly innovative aircraft cabin simulator is presented.. The aircraft cabin simulator is a testbed that used for European Project SEAT (Smart tEchnologies for Stress free Air Travel). The SEAT project aims to

EMERGE - ESnet/MREN Regional Science Grid Experimental NGI Testbed

Energy Technology Data Exchange (ETDEWEB)

Mambretti, Joe; DeFanti, Tom; Brown, Maxine

2001-07-31

This document is the final report on the EMERGE Science Grid testbed research project from the perspective of the International Center for Advanced Internet Research (iCAIR) at Northwestern University, which was a subcontractor to this UIC project. This report is a compilation of information gathered from a variety of materials related to this project produced by multiple EMERGE participants, especially those at Electronic Visualization Lab (EVL) at the University of Illinois at Chicago (UIC), Argonne National Lab and iCAIR. The EMERGE Science Grid project was managed by Tom DeFanti, PI from EVL at UIC.

Real-Time Emulation of Heterogeneous Wireless Networks with End-to-Edge Quality of Service Guarantees: The AROMA Testbed

Directory of Open Access Journals (Sweden)

Anna Umbert

2010-01-01

Full Text Available This work presents and describes the real-time testbed for all-IP Beyond 3G (B3G heterogeneous wireless networks that has been developed in the framework of the European IST AROMA project. The main objective of the AROMA testbed is to provide a highly accurate and realistic framework where the performance of algorithms, policies, protocols, services, and applications for a complete heterogeneous wireless network can be fully assessed and evaluated before bringing them to a real system. The complexity of the interaction between all-IP B3G systems and user applications, while dealing with the Quality of Service (QoS concept, motivates the development of this kind of emulation platform where different solutions can be tested in realistic conditions that could not be achieved by means of simple offline simulations. This work provides an in-depth description of the AROMA testbed, emphasizing many interesting implementation details and lessons learned during the development of the tool that may result helpful to other researchers and system engineers in the development of similar emulation platforms. Several case studies are also presented in order to illustrate the full potential and capabilities of the presented emulation platform.

Development of an autonomous power system testbed

International Nuclear Information System (INIS)

Barton, J.R.; Adams, T.; Liffring, M.E.

1985-01-01

A power system testbed has been assembled to advance the development of large autonomous electrical power systems required for the space station, spacecraft, and aircraft. The power system for this effort was designed to simulate single- or dual-bus autonomous power systems, or autonomous systems that reconfigure from a single bus to a dual bus following a severe fault. The approach taken was to provide a flexible power system design with two computer systems for control and management. One computer operates as the control system and performs basic control functions, data and command processing, charge control, and provides status to the second computer. The second computer contains expert system software for mission planning, load management, fault identification and recovery, and sends load and configuration commands to the control system

Test-bed for the remote health monitoring system for bridge structures using FBG sensors

Science.gov (United States)

Lee, Chin-Hyung; Park, Ki-Tae; Joo, Bong-Chul; Hwang, Yoon-Koog

2009-05-01

This paper reports on test-bed for the long-term health monitoring system for bridge structures employing fiber Bragg grating (FBG) sensors, which is remotely accessible via the web, to provide real-time quantitative information on a bridge's response to live loading and environmental changes, and fast prediction of the structure's integrity. The sensors are attached on several locations of the structure and connected to a data acquisition system permanently installed onsite. The system can be accessed through remote communication using an optical cable network, through which the evaluation of the bridge behavior under live loading can be allowed at place far away from the field. Live structural data are transmitted continuously to the server computer at the central office. The server computer is connected securely to the internet, where data can be retrieved, processed and stored for the remote web-based health monitoring. Test-bed revealed that the remote health monitoring technology will enable practical, cost-effective, and reliable condition assessment and maintenance of bridge structures.

Design and Development of a 200-kW Turbo-Electric Distributed Propulsion Testbed

Science.gov (United States)

Papathakis, Kurt V.; Kloesel, Kurt J.; Lin, Yohan; Clarke, Sean; Ediger, Jacob J.; Ginn, Starr

2016-01-01

The National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center (AFRC) (Edwards, California) is developing a Hybrid-Electric Integrated Systems Testbed (HEIST) Testbed as part of the HEIST Project, to study power management and transition complexities, modular architectures, and flight control laws for turbo-electric distributed propulsion technologies using representative hardware and piloted simulations. Capabilities are being developed to assess the flight readiness of hybrid electric and distributed electric vehicle architectures. Additionally, NASA will leverage experience gained and assets developed from HEIST to assist in flight-test proposal development, flight-test vehicle design, and evaluation of hybrid electric and distributed electric concept vehicles for flight safety. The HEIST test equipment will include three trailers supporting a distributed electric propulsion wing, a battery system and turbogenerator, dynamometers, and supporting power and communication infrastructure, all connected to the AFRC Core simulation. Plans call for 18 high performance electric motors that will be powered by batteries and the turbogenerator, and commanded by a piloted simulation. Flight control algorithms will be developed on the turbo-electric distributed propulsion system.

Advanced ASON prototyping research activities in China

Science.gov (United States)

Hu, WeiSheng; Jin, Yaohui; Guo, Wei; Su, Yikai; He, Hao; Sun, Weiqiang

2005-02-01

This paper provides an overview of prototyping research activities of automatically switched optical networks and transport networks (ASONs/ASTNs) in China. In recent years, China has recognized the importance and benefits of the emerging ASON/ASTN techniques. During the period of 2001 and 2002, the national 863 Program of China started the preliminary ASON research projects with the main objectives to build preliminary ASON testbeds, develop control plane protocols and test their performance in the testbeds. During the period of 2003 and 2004, the 863 program started ASTN prototyping equipment projects for more practical applications. Totally 12 ASTN equipments are being developed by three groups led by Chinese venders: ZTE with Beijing University of Posts and Telecommunications (BUPT), Wuhan Research Institute of Posts and Telecommunication (WRI) with Shanghai Jiao Tong University (SJTU), and Huawei Inc. Meanwhile, as the ASTN is maturing, some of the China"s carries are participating in the OIF"s World Interoperability Demonstration, carrying out ASTN test, or deploying ASTN backbone networks. Finally, several ASTN backbone networks being tested or deployed now will be operated by the carries in 2005. The 863 Program will carry out an ASTN field trail in Yangtse River Delta, and finally deploy the 3TNET. 3TNET stands for Tbps transmission, Tbps switching, and Tbps routing, as well as a network integrating the above techniques. A task force under the "863" program is responsible for ASTN equipment specifications and interoperation agreements, technical coordination among all the participants, schedule of the whole project during the project undergoing, and organization of internetworking of all the equipments in the laboratories and field trials.

A low-cost test-bed for real-time landmark tracking

Science.gov (United States)

Csaszar, Ambrus; Hanan, Jay C.; Moreels, Pierre; Assad, Christopher

2007-04-01

A low-cost vehicle test-bed system was developed to iteratively test, refine and demonstrate navigation algorithms before attempting to transfer the algorithms to more advanced rover prototypes. The platform used here was a modified radio controlled (RC) car. A microcontroller board and onboard laptop computer allow for either autonomous or remote operation via a computer workstation. The sensors onboard the vehicle represent the types currently used on NASA-JPL rover prototypes. For dead-reckoning navigation, optical wheel encoders, a single axis gyroscope, and 2-axis accelerometer were used. An ultrasound ranger is available to calculate distance as a substitute for the stereo vision systems presently used on rovers. The prototype also carries a small laptop computer with a USB camera and wireless transmitter to send real time video to an off-board computer. A real-time user interface was implemented that combines an automatic image feature selector, tracking parameter controls, streaming video viewer, and user generated or autonomous driving commands. Using the test-bed, real-time landmark tracking was demonstrated by autonomously driving the vehicle through the JPL Mars yard. The algorithms tracked rocks as waypoints. This generated coordinates calculating relative motion and visually servoing to science targets. A limitation for the current system is serial computing-each additional landmark is tracked in order-but since each landmark is tracked independently, if transferred to appropriate parallel hardware, adding targets would not significantly diminish system speed.

Evaluasi Kinerja Layanan IPTV pada Jaringan Testbed WiMAX Berbasis Standar IEEE 802.16-2004

Directory of Open Access Journals (Sweden)

Prasetiyono Hari Mukti

2015-09-01

Full Text Available In this paper, a performance evaluation for IPTV Services over WiMAX testbed based on IEEE Standard 802.16-2004 will be described. The performance of the proposed system is evaluated in terms of delay, jitter, throughput and packet loss. Service performance evaluations are conducted on network topology of point-to-point in the variation of background traffic with different scheduling types. Background traffic is injected into the system to give the sense that the proposed system has variation traffic load. Scheduling type which are used in this paper are Best Effort (BE, Non-Real-Time Polling Service (nrtPS, Real-Time Polling Service (rtPS and Unsolicited Grant Service (UGS. The expemerintal results of IPTV service performance over the testbed network show that the maximum average of delay, jitter, packet loss and jitter are 16.581 ms, 58.515 ms, 0.67 Mbps dan 10.96%, respectively.

Data systems and computer science programs: Overview

Science.gov (United States)

Smith, Paul H.; Hunter, Paul

1991-01-01

An external review of the Integrated Technology Plan for the Civil Space Program is presented. The topics are presented in viewgraph form and include the following: onboard memory and storage technology; advanced flight computers; special purpose flight processors; onboard networking and testbeds; information archive, access, and retrieval; visualization; neural networks; software engineering; and flight control and operations.

Design and implementation of a computer based site operations log for the ARM Program

International Nuclear Information System (INIS)

Tichler, J.L.; Bernstein, H.J.; Bobrowski, S.F.; Melton, R.B.; Campbell, A.P.; Edwards, D.M.; Kanciruk, P.; Singley, P.T.

1992-01-01

The Atmospheric Radiation Measurement (ARM) Program is a Department of Energy (DOE) research effort to reduce the uncertainties found in general circulation and other models due to the effects of clouds and solar radiation. ARM will provide an experimental testbed for the study of important atmospheric effects, particularly cloud and radiative processes, and testing of parameterizations of the processes for use in atmospheric models. The design of the testbed known as the Clouds and Radiation Testbed (CART), calls for five, long-term field data collection sites. The first site, located in the Southern Great Plains (SGP) in Lamont, OK began operation in the spring of 1992. The CART Data Environment (CDE) is the element of the testbed which acquires the basic observations from the instruments and processes them to meet the ARM requirements. A formal design was used to develop a description of the logical requirements for the CDE. This paper discusses the design and prototype implementation of a part of the CDE known as the site operations log, which records metadata defining the environment within which the data produced by the instruments is collected

Design of the CART data system for the US Department of Energy's ARM Program

International Nuclear Information System (INIS)

Melton, R.B.; Campbell, A.P.; Edwards, D.M.; Kanciruk, P.; Tichler, J.L.

1991-01-01

The Department of Energy (DOE) has initiated a major atmospheric research effort to reduce the uncertainties found in general circulation and other models due to the effects of clouds and radiation. The objective of the Atmospheric Radiation Measurement Program (ARM) is to provide an experimental testbed for the study of important atmospheric effects, particularly cloud and radiative processes, and testing parameterizations of the processes for use in atmospheric models. This experimental testbed, known as the Clouds and Radiation Testbed (CART), will include a complex data system, the CART Data Environment (CDE). The major functions of the CDE will be to: acquire environments from instruments and external data sources; perform quality assessments of the data streams; create data streams of known quality to be used as model input compared to model output; execute the models and capture their predictions; and make data streams associated with model tests available to ARM investigators in near real-time. The CDE will also be expected to capture ancillary information (''meta-data'') associated with the data streams, provide data management facilities for design of ARM experiments, and provide for archival data storage. The first section of this paper presents background information on CART. Next the process for the functional design of the system is described, the functional requirements summarized, and the conceptual architecture of the CDE is presented. Finally, the status of the CDE design activities is summarized, and major technical challenges are discussed

Real-time remote diagnostic monitoring test-bed in JET

International Nuclear Information System (INIS)

Castro, R.; Kneupner, K.; Vega, J.; De Arcas, G.; Lopez, J.M.; Purahoo, K.; Murari, A.; Fonseca, A.; Pereira, A.; Portas, A.

2010-01-01

Based on the remote experimentation concept oriented to long pulse shots, a test-bed system has been implemented in JET. Its main functionality is the real-time monitoring, on remote, of a reflectometer diagnostic, to visualize different data outputs and status information. The architecture of the system is formed by: the data generator components, the data distribution system, an access control service, and the client applications. In the test-bed there is one data generator, which is the acquisition equipment associated with the reflectometer diagnostic that generates data and status information. The data distribution system has been implemented using a publishing-subscribing technology that receives data from data generators and redistributes them to client applications. And finally, for monitoring, a client application based on JAVA Web Start technology has been used. There are three interesting results from this project. The first one is the analysis of different aspects (data formats, data frame rate, data resolution, etc) related with remote real-time diagnostic monitoring oriented to long pulse experiments. The second one is the definition and implementation of an architecture, flexible enough to be applied to different types of data generated from other diagnostics, and that fits with remote access requirements. Finally, the third result is a secure system, taking into account internal networks and firewalls aspects of JET, and securing the access from remote users. For this last issue, PAPI technology has been used, enabling access control based on user attributes, enabling mobile users to monitor diagnostics in real-time, and enabling the integration of this service into the EFDA Federation (Castro et al., 2008 ).

Real-time remote diagnostic monitoring test-bed in JET

Energy Technology Data Exchange (ETDEWEB)

Castro, R., E-mail: rodrigo.castro@ciemat.e [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain); Kneupner, K. [EURATOM/UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Vega, J. [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain); De Arcas, G.; Lopez, J.M. [Universidad Politecnica de Madrid, Grupo I2A2, Madrid (Spain); Purahoo, K. [EURATOM/UKAEA Fusion Association, Culham Science Centre, Abingdon, OX14 3DB (United Kingdom); Murari, A. [Associazione EURATOM-ENEA per la Fusione, Consorzio RFX, 4-35127 Padova (Italy); Fonseca, A. [Associacao EURATOM/IST, Lisbon (Portugal); Pereira, A.; Portas, A. [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain)

2010-07-15

Based on the remote experimentation concept oriented to long pulse shots, a test-bed system has been implemented in JET. Its main functionality is the real-time monitoring, on remote, of a reflectometer diagnostic, to visualize different data outputs and status information. The architecture of the system is formed by: the data generator components, the data distribution system, an access control service, and the client applications. In the test-bed there is one data generator, which is the acquisition equipment associated with the reflectometer diagnostic that generates data and status information. The data distribution system has been implemented using a publishing-subscribing technology that receives data from data generators and redistributes them to client applications. And finally, for monitoring, a client application based on JAVA Web Start technology has been used. There are three interesting results from this project. The first one is the analysis of different aspects (data formats, data frame rate, data resolution, etc) related with remote real-time diagnostic monitoring oriented to long pulse experiments. The second one is the definition and implementation of an architecture, flexible enough to be applied to different types of data generated from other diagnostics, and that fits with remote access requirements. Finally, the third result is a secure system, taking into account internal networks and firewalls aspects of JET, and securing the access from remote users. For this last issue, PAPI technology has been used, enabling access control based on user attributes, enabling mobile users to monitor diagnostics in real-time, and enabling the integration of this service into the EFDA Federation (Castro et al., 2008 ).

Coral-based Proxy Records of Ocean Acidification: A Pilot Study at the Puerto Rico Test-bed Site

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Coral cores collected nearby the Atlantic Ocean Acidification Test-bed (AOAT) at La Parguera, Puerto Rico were used to characterize the relationship between...

Smart Grid: Network simulator for smart grid test-bed

International Nuclear Information System (INIS)

Lai, L C; Ong, H S; Che, Y X; Do, N Q; Ong, X J

2013-01-01

Smart Grid become more popular, a smaller scale of smart grid test-bed is set up at UNITEN to investigate the performance and to find out future enhancement of smart grid in Malaysia. The fundamental requirement in this project is design a network with low delay, no packet drop and with high data rate. Different type of traffic has its own characteristic and is suitable for different type of network and requirement. However no one understands the natural of traffic in smart grid. This paper presents the comparison between different types of traffic to find out the most suitable traffic for the optimal network performance.

Optimizing Electric Vehicle Coordination Over a Heterogeneous Mesh Network in a Scaled-Down Smart Grid Testbed

DEFF Research Database (Denmark)

Bhattarai, Bishnu Prasad; Lévesque, Martin; Maier, Martin

2015-01-01

High penetration of renewable energy sources and electric vehicles (EVs) create power imbalance and congestion in the existing power network, and hence causes significant problems in the control and operation. Despite investing huge efforts from the electric utilities, governments, and researchers......, smart grid (SG) is still at the developmental stage to address those issues. In this regard, a smart grid testbed (SGT) is desirable to develop, analyze, and demonstrate various novel SG solutions, namely demand response, real-time pricing, and congestion management. In this paper, a novel SGT...... is developed in a laboratory by scaling a 250 kVA, 0.4 kV real low-voltage distribution feeder down to 1 kVA, 0.22 kV. Information and communication technology is integrated in the scaled-down network to establish real-time monitoring and control. The novelty of the developed testbed is demonstrated...

Telescience testbed: Operational support functions for biomedical experiments

Science.gov (United States)

Yamashita, Masamichi; Watanabe, Satoru; Shoji, Takatoshi; Clarke, Andrew H.; Suzuki, Hiroyuki; Yanagihara, Dai

A telescience testbed was conducted to study the methodology of space biomedicine with simulated constraints imposed on space experiments. An experimental subject selected for this testbedding was an elaborate surgery of animals and electrophysiological measurements conducted by an operator onboard. The standing potential in the ampulla of the pigeon's semicircular canal was measured during gravitational and caloric stimulation. A principal investigator, isolated from the operation site, participated in the experiment interactively by telecommunication links. Reliability analysis was applied to the whole layers of experimentation, including design of experimental objectives and operational procedures. Engineering and technological aspects of telescience are discussed in terms of reliability to assure quality of science. Feasibility of robotics was examined for supportive functions to reduce the workload of the onboard operator.

Active sites environmental monitoring Program - Program Plan: Revision 2

International Nuclear Information System (INIS)

Morrissey, C.M.; Hicks, D.S.; Ashwood, T.L.; Cunningham, G.R.

1994-05-01

The Active Sites Environmental Monitoring Program (ASEMP), initiated in 1989, provides early detection and performance monitoring of active low-level-waste (LLW) and transuranic (TRU) waste facilities at Oak Ridge National Laboratory (ORNL). Several changes have recently occurred in regard to the sites that are currently used for waste storage and disposal. These changes require a second set of revisions to the ASEMP program plan. This document incorporates those revisions. This program plan presents the organization and procedures for monitoring the active sites. The program plan also provides internal reporting levels to guide the evaluation of monitoring results

A Real-Time GPP Software-Defined Radio Testbed for the Physical Layer of Wireless Standards

NARCIS (Netherlands)

Schiphorst, Roelof; Hoeksema, F.W.; Slump, Cornelis H.

2005-01-01

We present our contribution to the general-purpose-processor-(GPP)-based radio. We describe a baseband software-defined radio testbed for the physical layer of wireless LAN standards. All physical layer functions have been successfully mapped on a Pentium 4 processor that performs these functions in

A Method to Derive Monitoring Variables for a Cyber Security Test-bed of I and C System

Energy Technology Data Exchange (ETDEWEB)

Han, Kyung Soo; Song, Jae Gu; Lee, Joung Woon; Lee, Cheol Kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

In the IT field, monitoring techniques have been developed to protect the systems connected by networks from cyber attacks and incidents. For the development of monitoring systems for I and C cyber security, it is necessary to review the monitoring systems in the IT field and derive cyber security-related monitoring variables among the proprietary operating information about the I and C systems. Tests for the development and application of these monitoring systems may cause adverse effects on the I and C systems. To analyze influences on the system and safely intended variables, the construction of an I and C system Test-bed should be preceded. This article proposes a method of deriving variables that should be monitored through a monitoring system for cyber security as a part of I and C Test-bed. The surveillance features and the monitored variables of NMS(Network Management System), a monitoring technique in the IT field, were reviewed in section 2. In Section 3, the monitoring variables for an I and C cyber security were derived by the of NMS and the investigation for information used for hacking techniques that can be practiced against I and C systems. The monitoring variables of NMS in the IT field and the information about the malicious behaviors used for hacking were derived as expected variables to be monitored for an I and C cyber security research. The derived monitoring variables were classified into the five functions of NMS for efficient management. For the cyber security of I and C systems, the vulnerabilities should be understood through a penetration test etc. and an assessment of influences on the actual system should be carried out. Thus, constructing a test-bed of I and C systems is necessary for the safety system in operation. In the future, it will be necessary to develop a logging and monitoring system for studies on the vulnerabilities of I and C systems with test-beds.

A Method to Derive Monitoring Variables for a Cyber Security Test-bed of I and C System

International Nuclear Information System (INIS)

Han, Kyung Soo; Song, Jae Gu; Lee, Joung Woon; Lee, Cheol Kwon

2013-01-01

In the IT field, monitoring techniques have been developed to protect the systems connected by networks from cyber attacks and incidents. For the development of monitoring systems for I and C cyber security, it is necessary to review the monitoring systems in the IT field and derive cyber security-related monitoring variables among the proprietary operating information about the I and C systems. Tests for the development and application of these monitoring systems may cause adverse effects on the I and C systems. To analyze influences on the system and safely intended variables, the construction of an I and C system Test-bed should be preceded. This article proposes a method of deriving variables that should be monitored through a monitoring system for cyber security as a part of I and C Test-bed. The surveillance features and the monitored variables of NMS(Network Management System), a monitoring technique in the IT field, were reviewed in section 2. In Section 3, the monitoring variables for an I and C cyber security were derived by the of NMS and the investigation for information used for hacking techniques that can be practiced against I and C systems. The monitoring variables of NMS in the IT field and the information about the malicious behaviors used for hacking were derived as expected variables to be monitored for an I and C cyber security research. The derived monitoring variables were classified into the five functions of NMS for efficient management. For the cyber security of I and C systems, the vulnerabilities should be understood through a penetration test etc. and an assessment of influences on the actual system should be carried out. Thus, constructing a test-bed of I and C systems is necessary for the safety system in operation. In the future, it will be necessary to develop a logging and monitoring system for studies on the vulnerabilities of I and C systems with test-beds

AMOS Phase 4 program

Science.gov (United States)

Chapman, J.; McCormick, P.

1980-04-01

This report summarizes the activities which have occurred at the ARPA Maui Optical Site (AMOS) during the period 1 Jan 78 through 31 Dec 78. These activities have taken advantage of the AMOS Facility which was developed by APRA and now serves as a multipurpose advanced optical testbed. This report contains a complete summary of the development of AMOS, a description of the assets available and summarizes the major accomplishments.

Aerodynamic design of the National Rotor Testbed.

Energy Technology Data Exchange (ETDEWEB)

Kelley, Christopher Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-10-01

A new wind turbine blade has been designed for the National Rotor Testbed (NRT) project and for future experiments at the Scaled Wind Farm Technology (SWiFT) facility with a specific focus on scaled wakes. This report shows the aerodynamic design of new blades that can produce a wake that has similitude to utility scale blades despite the difference in size and location in the atmospheric boundary layer. Dimensionless quantities circulation, induction, thrust coefficient, and tip-speed-ratio were kept equal between rotor scales in region 2 of operation. The new NRT design matched the aerodynamic quantities of the most common wind turbine in the United States, the GE 1.5sle turbine with 37c model blades. The NRT blade design is presented along with its performance subject to the winds at SWiFT. The design requirements determined by the SWiFT experimental test campaign are shown to be met.

Test-bed Assessment of Communication Technologies for a Power-Balancing Controller

DEFF Research Database (Denmark)

Findrik, Mislav; Pedersen, Rasmus; Hasenleithner, Eduard

2016-01-01

and control. In this paper, we present a Smart Grid test-bed that integrates various communication technologies and deploys a power balancing controller for LV grids. Control performance of the introduced power balancing controller is subsequently investigated and its robustness to communication network cross......Due to growing need for sustainable energy, increasing number of different renewable energy resources are being connected into distribution grids. In order to efficiently manage a decentralized power generation units, the smart grid will rely on communication networks for information exchange...

Ames life science telescience testbed evaluation

Science.gov (United States)

Haines, Richard F.; Johnson, Vicki; Vogelsong, Kristofer H.; Froloff, Walt

1989-01-01

Eight surrogate spaceflight mission specialists participated in a real-time evaluation of remote coaching using the Ames Life Science Telescience Testbed facility. This facility consisted of three remotely located nodes: (1) a prototype Space Station glovebox; (2) a ground control station; and (3) a principal investigator's (PI) work area. The major objective of this project was to evaluate the effectiveness of telescience techniques and hardware to support three realistic remote coaching science procedures: plant seed germinator charging, plant sample acquisition and preservation, and remote plant observation with ground coaching. Each scenario was performed by a subject acting as flight mission specialist, interacting with a payload operations manager and a principal investigator expert. All three groups were physically isolated from each other yet linked by duplex audio and color video communication channels and networked computer workstations. Workload ratings were made by the flight and ground crewpersons immediately after completing their assigned tasks. Time to complete each scientific procedural step was recorded automatically. Two expert observers also made performance ratings and various error assessments. The results are presented and discussed.

SABA: A Testbed for a Real-Time MIMO System

Directory of Open Access Journals (Sweden)

Brühl Lars

2006-01-01

Full Text Available The growing demand for high data rates for wireless communication systems leads to the development of new technologies to increase the channel capacity thus increasing the data rate. MIMO (multiple-input multiple-output systems are best qualified for these applications. In this paper, we present a MIMO test environment for high data rate transmissions in frequency-selective environments. An overview of the testbed is given, including the analyzed algorithms, the digital signal processing with a new highly parallel processor to perform the algorithms in real time, as well as the analog front-ends. A brief overview of the influence of polarization on the channel capacity is given as well.

X-ray Pulsar Navigation Algorithms and Testbed for SEXTANT

Science.gov (United States)

Winternitz, Luke M. B.; Hasouneh, Monther A.; Mitchell, Jason W.; Valdez, Jennifer E.; Price, Samuel R.; Semper, Sean R.; Yu, Wayne H.; Ray, Paul S.; Wood, Kent S.; Arzoumanian, Zaven;

Innovation in OGC: The Interoperability Program

Directory of Open Access Journals (Sweden)

George Percivall

2015-10-01

Full Text Available The OGC Interoperability Program is a source of innovation in the development of open standards. The approach to innovation is based on hands-on; collaborative engineering leading to more mature standards and implementations. The process of the Interoperability Program engages a community of sponsors and participants based on an economic model that benefits all involved. Each initiative begins with an innovative approach to identify interoperability needs followed by agile software development to advance the state of technology to the benefit of society. Over eighty initiatives have been conducted in the Interoperability Program since the breakthrough Web Mapping Testbed began the program in 1999. OGC standards that were initiated in Interoperability Program are the basis of two thirds of the certified compliant products.

SPoRT - An End-to-End R2O Activity

Science.gov (United States)

Jedlovec, Gary J.

2009-01-01

Established in 2002 to demonstrate the weather and forecasting application of real-time EOS measurements, the Short-term Prediction Research and Transition (SPoRT) program has grown to be an end-to-end research to operations activity focused on the use of advanced NASA modeling and data assimilation approaches, nowcasting techniques, and unique high-resolution multispectral observational data applications from EOS satellites to improve short-term weather forecasts on a regional and local scale. SPoRT currently partners with several universities and other government agencies for access to real-time data and products, and works collaboratively with them and operational end users at 13 WFOs to develop and test the new products and capabilities in a "test-bed" mode. The test-bed simulates key aspects of the operational environment without putting constraints on the forecaster workload. Products and capabilities which show utility in the test-bed environment are then transitioned experimentally into the operational environment for further evaluation and assessment. SPoRT focuses on a suite of data and products from MODIS, AMSR-E, and AIRS on the NASA Terra and Aqua satellites, and total lightning measurements from ground-based networks. Some of the observations are assimilated into or used with various versions of the WRF model to provide supplemental forecast guidance to operational end users. SPoRT is enhancing partnerships with NOAA / NESDIS for new product development and data access to exploit the remote sensing capabilities of instruments on the NPOESS satellites to address short term weather forecasting problems. The VIIRS and CrIS instruments on the NPP and follow-on NPOESS satellites provide similar observing capabilities to the MODIS and AIRS instruments on Terra and Aqua. SPoRT will be transitioning existing and new capabilities into the AWIIPS II environment to continue the continuity of its activities.

Workshop on the Suborbital Science Sounding Rocket Program, Volume 1

Science.gov (United States)

1991-01-01

The unique characteristics of the sounding rocket program is described, with its importance to space science stressed, especially in providing UARS correlative measurements. The program provided opportunities to do innovative scientific studies in regions not other wise accessible; it was a testbed for developing new technologies; and its key attributes were flexibility, reliability, and economy. The proceedings of the workshop are presented in viewgraph form, including the objectives of the workshop and the workshop agenda.

FloorNet: Deployment and Evaluation of a Multihop Wireless 802.11 Testbed

Directory of Open Access Journals (Sweden)

Zink Michael

2010-01-01

Full Text Available A lot of attention has been given to multihop wireless networks lately, but further research—in particular, through experimentation—is needed. This attention has motivated an increase in the number of 802.11-based deployments, both indoor and outdoor. These testbeds, which require a significant amount of resources during both deployment and maintenance, are used to run measurements in order to analyze and understand the limitation and differences between analytical or simulation-based figures and the results from real-life experimentation. This paper makes two major contributions: (i first, we describe a novel wireless multihop testbed, which we name FloorNet, that is deployed and operated under the false floor of a lab in our Computer Science building. This false floor provides a strong physical protection that prevents disconnections or misplacements, as well as radio shielding (to some extent thanks to the false floor panels—this later feature is assessed through experimentation; (ii second, by running exhaustive and controlled experiments we are able to analyze the performance limits of commercial off-the-shelf hardware, as well as to derive practical design criteria for the deployment and configuration of mesh networks. These results both provide valuable insights of wireless multihop performance and prove that FloorNet constitutes a valuable asset to research on wireless mesh networks.

Open-Source Based Testbed for Multioperator 4G/5G Infrastructure Sharing in Virtual Environments

Directory of Open Access Journals (Sweden)

Ricardo Marco Alaez

2017-01-01

Full Text Available Fourth-Generation (4G mobile networks are based on Long-Term Evolution (LTE technologies and are being deployed worldwide, while research on further evolution towards the Fifth Generation (5G has been recently initiated. 5G will be featured with advanced network infrastructure sharing capabilities among different operators. Therefore, an open-source implementation of 4G/5G networks with this capability is crucial to enable early research in this area. The main contribution of this paper is the design and implementation of such a 4G/5G open-source testbed to investigate multioperator infrastructure sharing capabilities executed in virtual architectures. The proposed design and implementation enable the virtualization and sharing of some of the components of the LTE architecture. A testbed has been implemented and validated with intensive empirical experiments conducted to validate the suitability of virtualizing LTE components in virtual infrastructures (i.e., infrastructures with multitenancy sharing capabilities. The impact of the proposed technologies can lead to significant saving of both capital and operational costs for mobile telecommunication operators.

High-Resolution Adaptive Optics Test-Bed for Vision Science

International Nuclear Information System (INIS)

Wilks, S.C.; Thomspon, C.A.; Olivier, S.S.; Bauman, B.J.; Barnes, T.; Werner, J.S.

2001-01-01

We discuss the design and implementation of a low-cost, high-resolution adaptive optics test-bed for vision research. It is well known that high-order aberrations in the human eye reduce optical resolution and limit visual acuity. However, the effects of aberration-free eyesight on vision are only now beginning to be studied using adaptive optics to sense and correct the aberrations in the eye. We are developing a high-resolution adaptive optics system for this purpose using a Hamamatsu Parallel Aligned Nematic Liquid Crystal Spatial Light Modulator. Phase-wrapping is used to extend the effective stroke of the device, and the wavefront sensing and wavefront correction are done at different wavelengths. Issues associated with these techniques will be discussed

Activity computer program for calculating ion irradiation activation

Science.gov (United States)

Palmer, Ben; Connolly, Brian; Read, Mark

2017-07-01

A computer program, Activity, was developed to predict the activity and gamma lines of materials irradiated with an ion beam. It uses the TENDL (Koning and Rochman, 2012) [1] proton reaction cross section database, the Stopping and Range of Ions in Matter (SRIM) (Biersack et al., 2010) code, a Nuclear Data Services (NDS) radioactive decay database (Sonzogni, 2006) [2] and an ENDF gamma decay database (Herman and Chadwick, 2006) [3]. An extended version of Bateman's equation is used to calculate the activity at time t, and this equation is solved analytically, with the option to also solve by numeric inverse Laplace Transform as a failsafe. The program outputs the expected activity and gamma lines of the activated material.

Microgrid testbeds around the world: State of art

International Nuclear Information System (INIS)

Hossain, Eklas; Kabalci, Ersan; Bayindir, Ramazan; Perez, Ronald

2014-01-01

Highlights: • A detail discussion on microgrid project around the world such as North American, Europe, and Japan. • Key benefits of microgrid, issues with on-site generation, features. • Why we need distributed generation system with a brief introduction. • Distributed generation technologies with cost analysis. • The overview on existing distribution network. - Abstract: This paper deals with the recent evolution of microgrids being used around the world in real life applications as well as laboratory application for research. This study is intended to introduce the subject by reviewing the components level, structure and types of microgrid applications installed as a plant or modeled as a simulation environment. The paper also presents a survey regarding published papers on why the microgrid is required, and what the components and control systems are which constitute the actual microgrid studies. It leads the researcher to see the microgrid in terms of the actual bigger picture of today and creates a new outlook about the potential developments. Additionally, comparison of microgrids in various regions based on several parameters allows researchers to define the required criteria and features of a special microgrid that is chosen for a particular scenario. The authors of this paper also tabulated all the necessary information about microgrids, and proposed a standard microgrid for better power quality and optimizing energy generation. Consequently, it is focused on inadequate knowledge and technology gaps in the power system field with regards to the future, and it is this which has been illustrated for the reader. The existing microgrid testbeds all around the world have been studied and analyzed and several of them are explained as an example in this study. Later, those investigated distribution systems are classified based on region (North America, Europe and Asia) and, as presented in literature, a significant amount of deviation has been found

Development of research reactor simulator and its application to dynamic test-bed

International Nuclear Information System (INIS)

Kwon, Kee-Choon; Baang, Dane; Park, Jae-Chang; Lee, Seung-Wook; Bae, Sung Won

2014-01-01

We developed a real-time simulator for 'High-flux Advanced Neutron Application ReactOr (HANARO), and the Jordan Research and Training Reactor (JRTR). The main purpose of this simulator is operator training, but we modified this simulator into a dynamic test-bed (DTB) to test the functions and dynamic control performance of reactor regulating system (RRS) in HANARO or JRTR before installation. The simulator hardware consists of a host computer, 6 operator stations, a network switch, and a large display panel. The software includes a mathematical model that implements plant dynamics in real-time, an instructor station module that manages user instructions, and a human machine interface module. The developed research reactor simulators are installed in the Korea Atomic Energy Research Institute nuclear training center for reactor operator training. To use the simulator as a dynamic test-bed, the reactor regulating system modeling software of the simulator was replaced by actual RRS cabinet, and was interfaced using a hard-wired and network-based interface. RRS cabinet generates control signals for reactor power control based on the various feedback signals from DTB, and the DTB runs plant dynamics based on the RRS control signals. Thus the Hardware-In-the-Loop Simulation between RRS and the emulated plant (DTB) has been implemented and tested in this configuration. The test result shows that the developed DTB and actual RRS cabinet works together simultaneously resulting in quite good dynamic control performances. (author)

A Beginner's Sequence of Programming Activities.

Science.gov (United States)

Slesnick, Twila

1984-01-01

Presents various programing activities using the BASIC and LOGO programing languages. Activities are included in separate sections with a title indicating the nature of the activities and the "tools" (commands) needed. For example, "Old-fashioned drawing" requires several tools (PRINT, LIST, RUN, GOTO) to make drawings using…

Real-Time Remote Diagnostic Monitoring Test-bed in JET

Energy Technology Data Exchange (ETDEWEB)

Castro, R. [Asociation Euratom/CIEMAT para Fusion, Madrid (Spain); Kneupner, K.; Purahoo, K. [EURATOM/UKAEA Fusion Association, Abingdon (United Kingdom); Vega, J.; Pereira, A.; Portas, A. [Association EuratomCIEMAT para Fusion, Madrid (Spain); De Arcas, G.; Lopez, J.M. [Universidad Politecnica de Madrid (Spain); Murari, A. [Consorzio RFX, Padova (Italy); Fonseca, A. [Associacao URATOM/IST, Lisboa (Portugal); Contributors, J.E. [JET-EFDA, Abingdon (United Kingdom)

2009-07-01

Based on the remote experimentation concept oriented to long pulse shots, a test-bed system has been implemented in JET. It integrates 2 functionalities. The first one is the real-time monitoring, on remote, of a reflectometer diagnostic, to visualize different data outputs and status information. The second one is the integration of dotJET (Diagnostic Overview Tool for JET), which internally provides at JET an overview about the current diagnostic systems state, in order to monitor, on remote, JET diagnostics status. The architecture of the system is formed by: the data generator components, the data distribution system, an access control service, and the client applications. In the test-bed there are two data generators: the acquisition equipment associated with the reflectometer diagnostic that generates data and status information, and dotJET server that centralize the access to the status information of JET diagnostics. The data distribution system has been implemented using a publishing-subscribing technology that receives data from data generators and redistributes them to client applications. And finally, for monitoring, a client application based on Java Web Start technology, and a dotJET client application have been used. There are 3 interesting results from this project. The first one is the analysis of different aspects (data formats, data frame rate, data resolution, etc) related with remote real-time diagnostic monitoring oriented to long pulse experiments. The second one is the definition and implementation of a flexible enough architecture, to be applied to different types of data generated from other diagnostics, and that fits with remote access requirements; and the third one is to have achieved a secure system, taking into account internal networks and firewalls aspects in JET, and securing the access from remote users. For this last issue, PAPI technology has been used, enabling access control based on user attributes, enabling mobile users to

Implementation of Motion Simulation Software and Visual-Auditory Electronics for Use in a Low Gravity Robotic Testbed

Science.gov (United States)

Martin, William Campbell

2011-01-01

The Jet Propulsion Laboratory (JPL) is developing the All-Terrain Hex-Limbed Extra-Terrestrial Explorer (ATHLETE) to assist in manned space missions. One of the proposed targets for this robotic vehicle is a near-Earth asteroid (NEA), which typically exhibit a surface gravity of only a few micro-g. In order to properly test ATHLETE in such an environment, the development team has constructed an inverted Stewart platform testbed that acts as a robotic motion simulator. This project focused on creating physical simulation software that is able to predict how ATHLETE will function on and around a NEA. The corresponding platform configurations are calculated and then passed to the testbed to control ATHLETE's motion. In addition, imitation attitude, imitation attitude control thrusters were designed and fabricated for use on ATHLETE. These utilize a combination of high power LEDs and audio amplifiers to provide visual and auditory cues that correspond to the physics simulation.

The Fourier-Kelvin Stellar Interferometer (FKSI) Nulling Testbed II: Closed-loop Path Length Metrology And Control Subsystem

Science.gov (United States)

Frey, B. J.; Barry, R. K.; Danchi, W. C.; Hyde, T. T.; Lee, K. Y.; Martino, A. J.; Zuray, M. S.

2006-01-01

The Fourier-Kelvin Stellar Interferometer (FKSI) is a mission concept for an imaging and nulling interferometer in the near to mid-infrared spectral region (3-8 microns), and will be a scientific and technological pathfinder for upcoming missions including TPF-I/DARWIN, SPECS, and SPIRIT. At NASA's Goddard Space Flight Center, we have constructed a symmetric Mach-Zehnder nulling testbed to demonstrate techniques and algorithms that can be used to establish and maintain the 10(exp 4) null depth that will be required for such a mission. Among the challenges inherent in such a system is the ability to acquire and track the null fringe to the desired depth for timescales on the order of hours in a laboratory environment. In addition, it is desirable to achieve this stability without using conventional dithering techniques. We describe recent testbed metrology and control system developments necessary to achieve these goals and present our preliminary results.

Testbed for High-Acuity Imaging and Stable Photometry

Science.gov (United States)

Gregory, James

This proposal from MIT Lincoln Laboratory (LL) accompanies the NASA/APRA proposal enti-tled THAI-SPICE: Testbed for High-Acuity Imaging - Stable Photometry and Image-Motion Compensa-tion Experiment (submitted by Eliot Young, Southwest Research Institute). The goal of the THAI-SPICE project is to demonstrate three technologies that will help low-cost balloon-borne telescopes achieve diffraction-limited imaging: stable pointing, passive thermal stabilization and in-flight monitoring of the wave front error. This MIT LL proposal supplies a key element of the pointing stabilization component of THAI-SPICE: an electronic camera based on an orthogonaltransfer charge-coupled device (OTCCD). OTCCD cameras have been demonstrated with charge-transfer efficiencies >0.99999, noise of 90%. In addition to supplying a camera with an OTCCD detector, MIT LL will help with integration and testing of the OTCCD with the THAI-SPICE payload’s guide camera.

22 CFR 229.400 - Education programs or activities.

Science.gov (United States)

2010-04-01

... SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education Programs or Activities Prohibited § 229.400 Education programs or activities... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Education programs or activities. 229.400...

A numerical testbed for remote sensing of aerosols, and its demonstration for evaluating retrieval synergy from a geostationary satellite constellation of GEO-CAPE and GOES-R

International Nuclear Information System (INIS)

Wang, Jun; Xu, Xiaoguang; Ding, Shouguo; Zeng, Jing; Spurr, Robert; Liu, Xiong; Chance, Kelly; Mishchenko, Michael

2014-01-01

We present a numerical testbed for remote sensing of aerosols, together with a demonstration for evaluating retrieval synergy from a geostationary satellite constellation. The testbed combines inverse (optimal-estimation) software with a forward model containing linearized code for computing particle scattering (for both spherical and non-spherical particles), a kernel-based (land and ocean) surface bi-directional reflectance facility, and a linearized radiative transfer model for polarized radiance. Calculation of gas absorption spectra uses the HITRAN (HIgh-resolution TRANsmission molecular absorption) database of spectroscopic line parameters and other trace species cross-sections. The outputs of the testbed include not only the Stokes 4-vector elements and their sensitivities (Jacobians) with respect to the aerosol single scattering and physical parameters (such as size and shape parameters, refractive index, and plume height), but also DFS (Degree of Freedom for Signal) values for retrieval of these parameters. This testbed can be used as a tool to provide an objective assessment of aerosol information content that can be retrieved for any constellation of (planned or real) satellite sensors and for any combination of algorithm design factors (in terms of wavelengths, viewing angles, radiance and/or polarization to be measured or used). We summarize the components of the testbed, including the derivation and validation of analytical formulae for Jacobian calculations. Benchmark calculations from the forward model are documented. In the context of NASA's Decadal Survey Mission GEO-CAPE (GEOstationary Coastal and Air Pollution Events), we demonstrate the use of the testbed to conduct a feasibility study of using polarization measurements in and around the O 2 A band for the retrieval of aerosol height information from space, as well as an to assess potential improvement in the retrieval of aerosol fine and coarse mode aerosol optical depth (AOD) through the

Full-Scaled Advanced Systems Testbed: Ensuring Success of Adaptive Control Research Through Project Lifecycle Risk Mitigation

Science.gov (United States)

Pavlock, Kate M.

2011-01-01

The National Aeronautics and Space Administration's Dryden Flight Research Center completed flight testing of adaptive controls research on the Full-Scale Advance Systems Testbed (FAST) in January of 2011. The research addressed technical challenges involved with reducing risk in an increasingly complex and dynamic national airspace. Specific challenges lie with the development of validated, multidisciplinary, integrated aircraft control design tools and techniques to enable safe flight in the presence of adverse conditions such as structural damage, control surface failures, or aerodynamic upsets. The testbed is an F-18 aircraft serving as a full-scale vehicle to test and validate adaptive flight control research and lends a significant confidence to the development, maturation, and acceptance process of incorporating adaptive control laws into follow-on research and the operational environment. The experimental systems integrated into FAST were designed to allow for flexible yet safe flight test evaluation and validation of modern adaptive control technologies and revolve around two major hardware upgrades: the modification of Production Support Flight Control Computers (PSFCC) and integration of two, fourth-generation Airborne Research Test Systems (ARTS). Post-hardware integration verification and validation provided the foundation for safe flight test of Nonlinear Dynamic Inversion and Model Reference Aircraft Control adaptive control law experiments. To ensure success of flight in terms of cost, schedule, and test results, emphasis on risk management was incorporated into early stages of design and flight test planning and continued through the execution of each flight test mission. Specific consideration was made to incorporate safety features within the hardware and software to alleviate user demands as well as into test processes and training to reduce human factor impacts to safe and successful flight test. This paper describes the research configuration

A Numerical Testbed for Remote Sensing of Aerosols, and its Demonstration for Evaluating Retrieval Synergy from a Geostationary Satellite Constellation of GEO-CAPE and GOES-R

Science.gov (United States)

Wang, Jun; Xu, Xiaoguang; Ding, Shouguo; Zeng, Jing; Spurr, Robert; Liu, Xiong; Chance, Kelly; Mishchenko, Michael I.

2014-01-01

We present a numerical testbed for remote sensing of aerosols, together with a demonstration for evaluating retrieval synergy from a geostationary satellite constellation. The testbed combines inverse (optimal-estimation) software with a forward model containing linearized code for computing particle scattering (for both spherical and non-spherical particles), a kernel-based (land and ocean) surface bi-directional reflectance facility, and a linearized radiative transfer model for polarized radiance. Calculation of gas absorption spectra uses the HITRAN (HIgh-resolution TRANsmission molecular absorption) database of spectroscopic line parameters and other trace species cross-sections. The outputs of the testbed include not only the Stokes 4-vector elements and their sensitivities (Jacobians) with respect to the aerosol single scattering and physical parameters (such as size and shape parameters, refractive index, and plume height), but also DFS (Degree of Freedom for Signal) values for retrieval of these parameters. This testbed can be used as a tool to provide an objective assessment of aerosol information content that can be retrieved for any constellation of (planned or real) satellite sensors and for any combination of algorithm design factors (in terms of wavelengths, viewing angles, radiance and/or polarization to be measured or used). We summarize the components of the testbed, including the derivation and validation of analytical formulae for Jacobian calculations. Benchmark calculations from the forward model are documented. In the context of NASA's Decadal Survey Mission GEOCAPE (GEOstationary Coastal and Air Pollution Events), we demonstrate the use of the testbed to conduct a feasibility study of using polarization measurements in and around the O2 A band for the retrieval of aerosol height information from space, as well as an to assess potential improvement in the retrieval of aerosol fine and coarse mode aerosol optical depth (AOD) through the

NN-SITE: A remote monitoring testbed facility

International Nuclear Information System (INIS)

Kadner, S.; White, R.; Roman, W.; Sheely, K.; Puckett, J.; Ystesund, K.

1997-01-01

DOE, Aquila Technologies, LANL and SNL recently launched collaborative efforts to create a Non-Proliferation Network Systems Integration and Test (NN-Site, pronounced N-Site) facility. NN-Site will focus on wide area, local area, and local operating level network connectivity including Internet access. This facility will provide thorough and cost-effective integration, testing and development of information connectivity among diverse operating systems and network topologies prior to full-scale deployment. In concentrating on instrument interconnectivity, tamper indication, and data collection and review, NN-Site will facilitate efforts of equipment providers and system integrators in deploying systems that will meet nuclear non-proliferation and safeguards objectives. The following will discuss the objectives of ongoing remote monitoring efforts, as well as the prevalent policy concerns. An in-depth discussion of the Non-Proliferation Network Systems Integration and Test facility (NN-Site) will illuminate the role that this testbed facility can perform in meeting the objectives of remote monitoring efforts, and its potential contribution in promoting eventual acceptance of remote monitoring systems in facilities worldwide

Link Adaptation for Mitigating Earth-To-Space Propagation Effects on the NASA SCaN Testbed

Science.gov (United States)

Kilcoyne, Deirdre K.; Headley, William C.; Leffke, Zach J.; Rowe, Sonya A.; Mortensen, Dale J.; Reinhart, Richard C.; McGwier, Robert W.

2016-01-01

In Earth-to-Space communications, well-known propagation effects such as path loss and atmospheric loss can lead to fluctuations in the strength of the communications link between a satellite and its ground station. Additionally, the typically unconsidered effect of shadowing due to the geometry of the satellite and its solar panels can also lead to link degradation. As a result of these anticipated channel impairments, NASA's communication links have been traditionally designed to handle the worst-case impact of these effects through high link margins and static, lower rate, modulation formats. The work presented in this paper aims to relax these constraints by providing an improved trade-off between data rate and link margin through utilizing link adaptation. More specifically, this work provides a simulation study on the propagation effects impacting NASA's SCaN Testbed flight software-defined radio (SDR) as well as proposes a link adaptation algorithm that varies the modulation format of a communications link as its signal-to-noise ratio fluctuates. Ultimately, the models developed in this work will be utilized to conduct real-time flight experiments on-board the NASA SCaN Testbed.

An ODMG-compatible testbed architecture for scalable management and analysis of physics data

International Nuclear Information System (INIS)

Malon, D.M.; May, E.N.

1997-01-01

This paper describes a testbed architecture for the investigation and development of scalable approaches to the management and analysis of massive amounts of high energy physics data. The architecture has two components: an interface layer that is compliant with a substantial subset of the ODMG-93 Version 1.2 specification, and a lightweight object persistence manager that provides flexible storage and retrieval services on a variety of single- and multi-level storage architectures, and on a range of parallel and distributed computing platforms

Dynamic Testing of the NASA Hypersonic Project Combined Cycle Engine Testbed for Mode Transition Experiments

Science.gov (United States)

2011-01-01

NASA is interested in developing technology that leads to more routine, safe, and affordable access to space. Access to space using airbreathing propulsion systems has potential to meet these objectives based on Airbreathing Access to Space (AAS) system studies. To this end, the NASA Fundamental Aeronautics Program (FAP) Hypersonic Project is conducting fundamental research on a Turbine Based Combined Cycle (TBCC) propulsion system. The TBCC being studied considers a dual flow-path inlet system. One flow-path includes variable geometry to regulate airflow to a turbine engine cycle. The turbine cycle provides propulsion from take-off to supersonic flight. The second flow-path supports a dual-mode scramjet (DMSJ) cycle which would be initiated at supersonic speed to further accelerate the vehicle to hypersonic speed. For a TBCC propulsion system to accelerate a vehicle from supersonic to hypersonic speed, a critical enabling technology is the ability to safely and effectively transition from the turbine to the DMSJ-referred to as mode transition. To experimentally test methods of mode transition, a Combined Cycle Engine (CCE) Large-scale Inlet testbed was designed with two flow paths-a low speed flow-path sized for a turbine cycle and a high speed flow-path designed for a DMSJ. This testbed system is identified as the CCE Large-Scale Inlet for Mode Transition studies (CCE-LIMX). The test plan for the CCE-LIMX in the NASA Glenn Research Center (GRC) 10- by 10-ft Supersonic Wind Tunnel (10x10 SWT) is segmented into multiple phases. The first phase is a matrix of inlet characterization (IC) tests to evaluate the inlet performance and establish the mode transition schedule. The second phase is a matrix of dynamic system identification (SysID) experiments designed to support closed-loop control development at mode transition schedule operating points for the CCE-LIMX. The third phase includes a direct demonstration of controlled mode transition using a closed loop control

Optical testbed for the LISA phasemeter

Science.gov (United States)

Schwarze, T. S.; Fernández Barranco, G.; Penkert, D.; Gerberding, O.; Heinzel, G.; Danzmann, K.

2016-05-01

The planned spaceborne gravitational wave detector LISA will allow the detection of gravitational waves at frequencies between 0.1 mHz and 1 Hz. A breadboard model for the metrology system aka the phasemeter was developed in the scope of an ESA technology development project by a collaboration between the Albert Einstein Institute, the Technical University of Denmark and the Danish industry partner Axcon Aps. It in particular provides the electronic readout of the main interferometer phases besides auxiliary functions. These include clock noise transfer, ADC pilot tone correction, inter-satellite ranging and data transfer. Besides in LISA, the phasemeter can also be applied in future satellite geodesy missions. Here we show the planning and advances in the implementation of an optical testbed for the full metrology chain. It is based on an ultra-stable hexagonal optical bench. This bench allows the generation of three unequal heterodyne beatnotes with a zero phase combination, thus providing the possibility to probe the phase readout for non-linearities in an optical three signal test. Additionally, the utilization of three independent phasemeters will allow the testing of the auxiliary functions. Once working, components can individually be replaced with flight-qualified hardware in this setup.

Termite: Emulation Testbed for Encounter Networks

Directory of Open Access Journals (Sweden)

Rodrigo Bruno

2015-08-01

Full Text Available Cutting-edge mobile devices like smartphones and tablets are equipped with various infrastructureless wireless interfaces, such as WiFi Direct and Bluetooth. Such technologies allow for novel mobile applications that take advantage of casual encounters between co-located users. However, the need to mimic the behavior of real-world encounter networks makes testing and debugging of such applications hard tasks. We present Termite, an emulation testbed for encounter networks. Our system allows developers to run their applications on a virtual encounter network emulated by software. Developers can model arbitrary encounter networks and specify user interactions on the emulated virtual devices. To facilitate testing and debugging, developers can place breakpoints, inspect the runtime state of virtual nodes, and run experiments in a stepwise fashion. Termite defines its own Petri Net variant to model the dynamically changing topology and synthesize user interactions with virtual devices. The system is designed to efficiently multiplex an underlying emulation hosting infrastructure across multiple developers, and to support heterogeneous mobile platforms. Our current system implementation supports virtual Android devices communicating over WiFi Direct networks and runs on top of a local cloud infrastructure. We evaluated our system using emulator network traces, and found that Termite is expressive and performs well.

Optical testbed for the LISA phasemeter

International Nuclear Information System (INIS)

Schwarze, T S; Fernández Barranco, G; Penkert, D; Gerberding, O; Heinzel, G; Danzmann, K

2016-01-01

The planned spaceborne gravitational wave detector LISA will allow the detection of gravitational waves at frequencies between 0.1 mHz and 1 Hz. A breadboard model for the metrology system aka the phasemeter was developed in the scope of an ESA technology development project by a collaboration between the Albert Einstein Institute, the Technical University of Denmark and the Danish industry partner Axcon Aps. It in particular provides the electronic readout of the main interferometer phases besides auxiliary functions. These include clock noise transfer, ADC pilot tone correction, inter-satellite ranging and data transfer. Besides in LISA, the phasemeter can also be applied in future satellite geodesy missions. Here we show the planning and advances in the implementation of an optical testbed for the full metrology chain. It is based on an ultra-stable hexagonal optical bench. This bench allows the generation of three unequal heterodyne beatnotes with a zero phase combination, thus providing the possibility to probe the phase readout for non-linearities in an optical three signal test. Additionally, the utilization of three independent phasemeters will allow the testing of the auxiliary functions. Once working, components can individually be replaced with flight-qualified hardware in this setup. (paper)

45 CFR 86.31 - Education programs or activities.

Science.gov (United States)

2010-10-01

... THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education Programs or Activities Prohibited § 86.31 Education programs or... 45 Public Welfare 1 2010-10-01 2010-10-01 false Education programs or activities. 86.31 Section 86...

PASS program status report

International Nuclear Information System (INIS)

Waddoups, I.G.; Burek, R.J.

1991-01-01

This paper reports that the Department of Energy, with direct support from Sandia National Laboratories, is developing new standards and systems for automated access control. The program, known as the Personnel Access-Control and Security-Enhancement System will be applied across the entire Department. The major goals are to afford increased protection for the Department's most valuable assets through use of compartmentalization and automated systems and meet certain minimum functional specifications, and to simplify handling of inter-site visit requests and approvals. Since the program's inception in 1988 accomplishments include development of minimum system requirements, specifications for a common badge and common data, a common biometric device, selection of early baseline hardware and software components for use in a testbed and demonstration system, and initiation of new installations and existing system modifications. These requirements have been issued with the most recent update to the Department's Safeguards and Security Standards and Criteria. Problems include agreement on standards between sites with widely varying characteristics, and integration of related health and safety procedures. A coalition of security people from the weapons laboratories met as a working group for a time to discuss and resolve some technical issues. More activity is needed in this area

Using the ISS as a testbed to prepare for the next generation of space-based telescopes

Science.gov (United States)

Postman, Marc; Sparks, William B.; Liu, Fengchuan; Ess, Kim; Green, Joseph; Carpenter, Kenneth G.; Thronson, Harley; Goullioud, Renaud

2012-09-01

The infrastructure available on the ISS provides a unique opportunity to develop the technologies necessary to assemble large space telescopes. Assembling telescopes in space is a game-changing approach to space astronomy. Using the ISS as a testbed enables a concentration of resources on reducing the technical risks associated with integrating the technologies, such as laser metrology and wavefront sensing and control (WFS&C), with the robotic assembly of major components including very light-weight primary and secondary mirrors and the alignment of the optical elements to a diffraction-limited optical system in space. The capability to assemble the optical system and remove and replace components via the existing ISS robotic systems such as the Special Purpose Dexterous Manipulator (SPDM), or by the ISS Flight Crew, allows for future experimentation as well as repair if necessary. In 2015, first light will be obtained by the Optical Testbed and Integration on ISS eXperiment (OpTIIX), a small 1.5-meter optical telescope assembled on the ISS. The primary objectives of OpTIIX include demonstrating telescope assembly technologies and end-to-end optical system technologies that will advance future large optical telescopes.

Designing, Implementing and Documenting the Atlas Networking Test-bed.

CERN Document Server

Martinsen, Hans Åge

The A Toroidal LHC ApparatuS (Atlas) experiment at the Large Hadron Colider (LHC) in European Organization for Nuclear Research (CERN), Geneva is a production environment. To develop new architectures, test new equipment and evaluate new technologies a well supported test bench is needed. A new one is now being commissioned and I will take a leading role in its development, commissioning and operation. This thesis will cover the requirements, the implementation, the documentation and the approach to the different challenges in implementing the testbed. I will be joining the project in the early stages and start by following the work that my colleagues are doing and then, as I get a better understanding, more responsibility will be given to me. To be able to suggest and implement solutions I will have to understand what the requirements are and how to achieve these requirements with the given resources.

Simulation to Flight Test for a UAV Controls Testbed

Science.gov (United States)

Motter, Mark A.; Logan, Michael J.; French, Michael L.; Guerreiro, Nelson M.

2006-01-01

The NASA Flying Controls Testbed (FLiC) is a relatively small and inexpensive unmanned aerial vehicle developed specifically to test highly experimental flight control approaches. The most recent version of the FLiC is configured with 16 independent aileron segments, supports the implementation of C-coded experimental controllers, and is capable of fully autonomous flight from takeoff roll to landing, including flight test maneuvers. The test vehicle is basically a modified Army target drone, AN/FQM-117B, developed as part of a collaboration between the Aviation Applied Technology Directorate (AATD) at Fort Eustis, Virginia and NASA Langley Research Center. Several vehicles have been constructed and collectively have flown over 600 successful test flights, including a fully autonomous demonstration at the Association of Unmanned Vehicle Systems International (AUVSI) UAV Demo 2005. Simulations based on wind tunnel data are being used to further develop advanced controllers for implementation and flight test.

22 CFR 146.400 - Education programs or activities.

Science.gov (United States)

2010-04-01

... Basis of Sex in Education Programs or Activities Prohibited § 146.400 Education programs or activities... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Education programs or activities. 146.400 Section 146.400 Foreign Relations DEPARTMENT OF STATE CIVIL RIGHTS NONDISCRIMINATION ON THE BASIS OF SEX...

Visible nulling coronagraph testbed results

Science.gov (United States)

Lyon, Richard G.; Clampin, Mark; Woodruff, Robert A.; Vasudevan, Gopal; Thompson, Patrick; Petrone, Peter; Madison, Timothy; Rizzo, Maxime; Melnick, Gary; Tolls, Volker

2009-08-01

We report on our recent laboratory results with the NASA/Goddard Space Flight Center (GSFC) Visible Nulling Coronagraph (VNC) testbed. We have experimentally achieved focal plane contrasts of 1 x 108 and approaching 109 at inner working angles of 2 * wavelength/D and 4 * wavelength/D respectively where D is the aperture diameter. The result was obtained using a broadband source with a narrowband spectral filter of width 10 nm centered on 630 nm. To date this is the deepest nulling result with a visible nulling coronagraph yet obtained. Developed also is a Null Control Breadboard (NCB) to assess and quantify MEMS based segmented deformable mirror technology and develop and assess closed-loop null sensing and control algorithm performance from both the pupil and focal planes. We have demonstrated closed-loop control at 27 Hz in the laboratory environment. Efforts are underway to first bring the contrast to > 109 necessary for the direct detection and characterization of jovian (Jupiter-like) and then to > 1010 necessary for terrestrial (Earth-like) exosolar planets. Short term advancements are expected to both broaden the spectral passband from 10 nm to 100 nm and to increase both the long-term stability to > 2 hours and the extent of the null out to a ~ 10 * wavelength / D via the use of MEMS based segmented deformable mirror technology, a coherent fiber bundle, achromatic phase shifters, all in a vacuum chamber at the GSFC VNC facility. Additionally an extreme stability textbook sized compact VNC is under development.

Photovoltaic Engineering Testbed: A Facility for Space Calibration and Measurement of Solar Cells on the International Space Station

Science.gov (United States)

Landis, Geoffrey A.; Bailey, Sheila G.; Jenkins, Phillip; Sexton, J. Andrew; Scheiman, David; Christie, Robert; Charpie, James; Gerber, Scott S.; Johnson, D. Bruce

2001-01-01

The Photovoltaic Engineering Testbed ("PET") is a facility to be flown on the International Space Station to perform calibration, measurement, and qualification of solar cells in the space environment and then returning the cells to Earth for laboratory use. PET will allow rapid turnaround testing of new photovoltaic technology under AM0 conditions.

Development of magnetostrictive active members for control of space structures

Science.gov (United States)

Johnson, Bruce G.; Avakian, Kevin M.; Fenn, Ralph C.; Gaffney, Monique S.; Gerver, Michael J.; Hawkey, Timothy J.; Boudreau, Donald J.

1992-08-01

The goal of this Phase 2 Small Business Innovative Research (SBIR) project was to determine the technical feasibility of developing magnetostrictive active members for use as truss elements in space structures. Active members control elastic vibrations of truss-based space structures and integrate the functions of truss structure element, actively controlled actuator, and sensor. The active members must control structural motion to the sub-micron level and, for many proposed space applications, work at cryogenic temperatures. Under this program both room temperature and cryogenic temperature magnetostrictive active members were designed, fabricated, and tested. The results of these performance tests indicated that room temperature magnetostrictive actuators feature higher strain, stiffness, and force capability with lower amplifier requirements than similarly sized piezoelectric or electrostrictive active members, at the cost of higher mass. Two different cryogenic temperature magnetostrictive materials were tested at liquid nitrogen temperatures, both with larger strain capability than the room temperature magnetostrictive materials. The cryogenic active member development included the design and fabrication of a cryostat that allows operation of the cryogenic active member in a space structure testbed.

Active Fire Mapping Program

Science.gov (United States)

Active Fire Mapping Program Current Large Incidents (Home) New Large Incidents Fire Detection Maps MODIS Satellite Imagery VIIRS Satellite Imagery Fire Detection GIS Data Fire Data in Google Earth ...

Aeronautics Autonomy Testbed Capability (AATC) Team Developed Concepts

Science.gov (United States)

Smith, Phillip J.

2018-01-01

In 2015, the National Aeronautics and Space Administration (NASA) formed a multi-center, interdisciplinary team of engineers from three different aeronautics research centers who were tasked with improving NASA autonomy research capabilities. This group was subsequently named the Aeronautics Autonomy Testbed Capability (AATC) team. To aid in confronting the autonomy research directive, NASA contracted IDEO, a design firm, to provide consultants and guides to educate NASA engineers through the practice of design thinking, which is an unconventional method for aerospace design processes. The team then began learning about autonomy research challenges by conducting interviews with a diverse group of researchers and pilots, military personnel and civilians, experts and amateurs. Part of this design thinking process involved developing ideas for products or programs known as concepts that could enable real world fulfillment of the most important latent needs identified through analysis of the interviews. The concepts are intended to be sacrificial, intermediate steps in the design thinking process and are presented in this report to record the efforts of the AATC group. Descriptions are provided in present tense to allow for further ideation and imagining the concept as reality as was attempted during the teams discussions and interviews. This does not indicate that the concepts are actually in practice within NASA though there may be similar existing programs independent of AATC. These concepts were primarily created at two distinct stages during the design thinking process. After the initial interviews, there was a workshop for concept development and the resulting ideas are shown in this work as from the First Round. As part of succeeding interviews, the team members presented the First Round concepts to refine the understanding of existing research needs. This knowledge was then used to generate an additional set of concepts denoted as the Second Round. Some

Ethical Development through Student Activities Programming.

Science.gov (United States)

Brock, Carol S.

1991-01-01

Student activities programing, viewed as essential to the college experience, is defended by outlining some of the values and growth opportunities it provides for students. Several specific programing strategies useful as catalysts in values development are described, including values clarification exercises, multicultural programing, and…

Program collaboration and service integration activities among HIV programs in 59 U.S. health departments.

Science.gov (United States)

Fitz Harris, Lauren F; Toledo, Lauren; Dunbar, Erica; Aquino, Gustavo A; Nesheim, Steven R

2014-01-01

We identified the level and type of program collaboration and service integration (PCSI) among HIV prevention programs in 59 CDC-funded health department jurisdictions. Annual progress reports (APRs) completed by all 59 health departments funded by CDC for HIV prevention activities were reviewed for collaborative and integrated activities reported by HIV programs for calendar year 2009. We identified associations between PCSI activities and funding, AIDS diagnosis rate, and organizational integration. HIV programs collaborated with other health department programs through data-related activities, provider training, and providing funding for sexually transmitted disease (STD) activities in 24 (41%), 31 (53%), and 16 (27%) jurisdictions, respectively. Of the 59 jurisdictions, 57 (97%) reported integrated HIV and STD testing at the same venue, 39 (66%) reported integrated HIV and tuberculosis testing, and 26 (44%) reported integrated HIV and viral hepatitis testing. Forty-five (76%) jurisdictions reported providing integrated education/outreach activities for HIV and at least one other disease. Twenty-six (44%) jurisdictions reported integrated partner services among HIV and STD programs. Overall, the level of PCSI activities was not associated with HIV funding, AIDS diagnoses, or organizational integration. HIV programs in health departments collaborate primarily with STD programs. Key PCSI activities include integrated testing, integrated education/outreach, and training. Future assessments are needed to evaluate PCSI activities and to identify the level of collaboration and integration among prevention programs.

Predicting daily physical activity in a lifestyle intervention program

NARCIS (Netherlands)

Long, Xi; Pauws, S.C.; Pijl, M.; Lacroix, J.; Goris, A.H.C.; Aarts, R.M.; Gottfried, B.; Aghajan, H.

2011-01-01

The growing number of people adopting a sedentary lifestyle these days creates a serious need for effective physical activity promotion programs. Often, these programs monitor activity, provide feedback about activity and offer coaching to increase activity. Some programs rely on a human coach who

AMP (Activity Manipulation Program)

International Nuclear Information System (INIS)

Engle, W.W. Jr.

1976-03-01

AMP is a FORTRAN IV program written to handle energy-group structured activity factors such as sources, conversion factors, and response functions, as used by ANISN, DOT III, and other nuclear reactor and shielding codes. Activities may be retrieved from ANISN-type cross-section and activity sets found on cards and tapes, and from tabular-type sets on cards. They may be altered by change of group structure, multiplication by a constant, or multiplication by delta E (the group-energy interval), and then output to ANISN-type cards or tape and tabular-type cards. A full edit of input and output activities is always printed by group and activity number

International program activities in magnetic fusion energy

International Nuclear Information System (INIS)

1986-03-01

The following areas of our international activities in magnetic fusion are briefly described: (1) policy; (2) background; (3) strategy; (4) strategic considerations and concerns; (5) domestic program inplications, and (6) implementation. The current US activities are reviewed. Some of our present program needs are outlined

Biodiesel Research : Alternative Fuels & Life-Cycle Engineering Program : November 29, 2006 to November 28, 2011

Science.gov (United States)

2011-12-20

The primary objective of this project is to develop multiple simulation Testbeds/transportation models to evaluate the impacts of DMA connected vehicle applications and the active and dynamic transportation management (ATDM) strategies. The outputs (...

Differential Programming Needs of College Students Preferring Web-Based Versus In-Person Physical Activity Programs.

Science.gov (United States)

Goldstein, Stephanie P; Forman, Evan M; Butryn, Meghan L; Herbert, James D

2017-09-21

College students report several barriers to exercise, highlighting a need for university-based programs that address these challenges. In contrast to in-person interventions, several web-based programs have been developed to enhance program engagement by increasing ease of access and lowering the necessary level of commitment to participate. Unfortunately, web-based programs continue to struggle with engagement and less-than-ideal outcomes. One explanation for this discrepancy is that different intervention modalities may attract students with distinctive activity patterns, motivators, barriers, and program needs. However, no studies have formally evaluated intervention modality preference (e.g., web-based or in-person) among college students. The current study sought to examine the relationship between intervention modality preference and physical activity programming needs. Undergraduate students (n = 157) enrolled in psychology courses at an urban university were asked to complete an online survey regarding current activity patterns and physical activity program preferences. Participants preferring web-based physical activity programs exercised less (p = .05), were less confident in their abilities to exercise (p = .01), were less likely to endorse the maintenance stage of change (p web-based programming may require programs that enhance self-efficacy by fostering goal-setting and problem-solving skills. A user-centered design approach may enhance the engagement (and therefore effectiveness) of physical activity promotion programs for college students.

High Energy Nuclear Database: A Testbed for Nuclear Data Information Technology

International Nuclear Information System (INIS)

Brown, D A; Vogt, R; Beck, B; Pruet, J

2007-01-01

We describe the development of an on-line high-energy heavy-ion experimental database. When completed, the database will be searchable and cross-indexed with relevant publications, including published detector descriptions. While this effort is relatively new, it will eventually contain all published data from older heavy-ion programs as well as published data from current and future facilities. These data include all measured observables in proton-proton, proton-nucleus and nucleus-nucleus collisions. Once in general use, this database will have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models for a broad range of experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion, target and source development for upcoming facilities such as the International Linear Collider and homeland security. This database is part of a larger proposal that includes the production of periodic data evaluations and topical reviews. These reviews would provide an alternative and impartial mechanism to resolve discrepancies between published data from rival experiments and between theory and experiment. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This project serves as a testbed for the further development of an object-oriented nuclear data format and database system. By using ''off-the-shelf'' software tools and techniques, the system is simple, robust, and extensible. Eventually we envision a ''Grand Unified Nuclear Format'' encapsulating data types used in the ENSDF, ENDF/B, EXFOR, NSR and other formats, including processed data formats

"I am active": effects of a program to promote active aging.

Science.gov (United States)

Mendoza-Ruvalcaba, Neyda Ma; Arias-Merino, Elva Dolores

2015-01-01

Active aging involves a general lifestyle strategy that allows preservation of both physical and mental health during the aging process. "I am Active" is a program designed to promote active aging by increased physical activity, healthy nutritional habits, and cognitive functioning. The purpose of this study was to assess the effectiveness of this program. Sixty-four healthy adults aged 60 years or older were recruited from senior centers and randomly allocated to an experimental group (n=31) or a control group (n=33). Baseline, post-test, and 6-month follow-up assessments were performed after the theoretical-practical intervention. Effect sizes were calculated. At the conclusion of the program, the experimental group showed significant improvement compared with the control group in the following domains: physical activity (falls risk, balance, flexibility, self-efficacy), nutrition (self-efficacy and nutritional status), cognitive performance (processing speed and self-efficacy), and quality of life (general, health and functionality, social and economic status). Although some declines were reported, improvements at follow-up remained in self-efficacy for physical activity, self-efficacy for nutrition, and processing speed, and participants had better nutritional status and quality of life overall. Our findings show that this program promotes improvements in domains of active aging, mainly in self-efficacy beliefs as well as in quality of life in healthy elders.

Advanced Diagnostic and Prognostic Testbed (ADAPT) Testability Analysis Report

Science.gov (United States)

Ossenfort, John

2008-01-01

As system designs become more complex, determining the best locations to add sensors and test points for the purpose of testing and monitoring these designs becomes more difficult. Not only must the designer take into consideration all real and potential faults of the system, he or she must also find efficient ways of detecting and isolating those faults. Because sensors and cabling take up valuable space and weight on a system, and given constraints on bandwidth and power, it is even more difficult to add sensors into these complex designs after the design has been completed. As a result, a number of software tools have been developed to assist the system designer in proper placement of these sensors during the system design phase of a project. One of the key functions provided by many of these software programs is a testability analysis of the system essentially an evaluation of how observable the system behavior is using available tests. During the design phase, testability metrics can help guide the designer in improving the inherent testability of the design. This may include adding, removing, or modifying tests; breaking up feedback loops, or changing the system to reduce fault propagation. Given a set of test requirements, the analysis can also help to verify that the system will meet those requirements. Of course, a testability analysis requires that a software model of the physical system is available. For the analysis to be most effective in guiding system design, this model should ideally be constructed in parallel with these efforts. The purpose of this paper is to present the final testability results of the Advanced Diagnostic and Prognostic Testbed (ADAPT) after the system model was completed. The tool chosen to build the model and to perform the testability analysis with is the Testability Engineering and Maintenance System Designer (TEAMS-Designer). The TEAMS toolset is intended to be a solution to span all phases of the system, from design and

Approaching the new reality. [changes in NASA space programs due to US economy

Science.gov (United States)

Diaz, Al V.

1993-01-01

The focus on more frequent access to space through smaller, less costly missions, and on NASA's role as a source of technological advance within the U.S. economy is discussed. The Pluto fast flyby mission is examined as an illustration of this approach. Testbeds are to be developed to survive individual programs, becoming permanent facilities, to allow for technological upgrades on an ongoing basis.

Air Vehicle Technology Integration Program (AVTIP) Delivery Order 0015: Open Control Platform (OCP) Software Enabled Control (SEC) Hardware in the Loop Simulation - OCP Hardware Integration

National Research Council Canada - National Science Library

Paunicka, James L

2005-01-01

...) project sponsored by the DARPA Software Enabled Control (SEC) Program. The purpose of this project is to develop the capability to be an OCP test-bed and to evaluate the OCP controls and simulation environment for a specific test case...

7 CFR 272.5 - Program informational activities.

Science.gov (United States)

2010-01-01

... creed, national origin or political belief. (c) Program informational activities for low-income..., application procedures, and benefits of the Food Stamp Program. Program informational materials used in such... the socio-economic and demographic characteristics of the target population, types of media used...

Genetic programs can be compressed and autonomously decompressed in live cells

Science.gov (United States)

Lapique, Nicolas; Benenson, Yaakov

2018-04-01

Fundamental computer science concepts have inspired novel information-processing molecular systems in test tubes1-13 and genetically encoded circuits in live cells14-21. Recent research has shown that digital information storage in DNA, implemented using deep sequencing and conventional software, can approach the maximum Shannon information capacity22 of two bits per nucleotide23. In nature, DNA is used to store genetic programs, but the information content of the encoding rarely approaches this maximum24. We hypothesize that the biological function of a genetic program can be preserved while reducing the length of its DNA encoding and increasing the information content per nucleotide. Here we support this hypothesis by describing an experimental procedure for compressing a genetic program and its subsequent autonomous decompression and execution in human cells. As a test-bed we choose an RNAi cell classifier circuit25 that comprises redundant DNA sequences and is therefore amenable for compression, as are many other complex gene circuits15,18,26-28. In one example, we implement a compressed encoding of a ten-gene four-input AND gate circuit using only four genetic constructs. The compression principles applied to gene circuits can enable fitting complex genetic programs into DNA delivery vehicles with limited cargo capacity, and storing compressed and biologically inert programs in vivo for on-demand activation.

Adaptive Signal Processing Testbed: VME-based DSP board market survey

Science.gov (United States)

Ingram, Rick E.

1992-04-01

The Adaptive Signal Processing Testbed (ASPT) is a real-time multiprocessor system utilizing digital signal processor technology on VMEbus based printed circuit boards installed on a Sun workstation. The ASPT has specific requirements, particularly as regards to the signal excision application, with respect to interfacing with current and planned data generation equipment, processing of the data, storage to disk of final and intermediate results, and the development tools for applications development and integration into the overall EW/COM computing environment. A prototype ASPT was implemented using three VME-C-30 boards from Applied Silicon. Experience gained during the prototype development led to the conclusions that interprocessor communications capability is the most significant contributor to overall ASPT performance. In addition, the host involvement should be minimized. Boards using different processors were evaluated with respect to the ASPT system requirements, pricing, and availability. Specific recommendations based on various priorities are made as well as recommendations concerning the integration and interaction of various tools developed during the prototype implementation.

High energy nuclear database: a test-bed for nuclear data information technology

International Nuclear Information System (INIS)

Brown, D.A.; Vogt, R.; Beck, B.; Pruet, J.; Vogt, R.

2008-01-01

We describe the development of an on-line high-energy heavy-ion experimental database. When completed, the database will be searchable and cross-indexed with relevant publications, including published detector descriptions. While this effort is relatively new, it will eventually contain all published data from older heavy-ion programs as well as published data from current and future facilities. These data include all measured observables in proton-proton, proton-nucleus and nucleus-nucleus collisions. Once in general use, this database will have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models for a broad range of experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion, target and source development for upcoming facilities such as the International Linear Collider and homeland security. This database is part of a larger proposal that includes the production of periodic data evaluations and topical reviews. These reviews would provide an alternative and impartial mechanism to resolve discrepancies between published data from rival experiments and between theory and experiment. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This project serves as a test-bed for the further development of an object-oriented nuclear data format and database system. By using 'off-the-shelf' software tools and techniques, the system is simple, robust, and extensible. Eventually we envision a 'Grand Unified Nuclear Format' encapsulating data types used in the ENSDF, Endf/B, EXFOR, NSR and other formats, including processed data formats. (authors)

A computer program for activation analysis

International Nuclear Information System (INIS)

Rantanen, J.; Rosenberg, R.J.

1983-01-01

A computer program for calculating the results of activation analysis is described. The program comprises two gamma spectrum analysis programs, STOAV and SAMPO and one program for calculating elemental concentrations, KVANT. STOAV is based on a simple summation of channels and SAMPO is based on fitting of mathematical functions. The programs are tested by analyzing the IAEA G-1 test spectra. In the determination of peak location SAMPO is somewhat better than STOAV and in the determination of peak area SAMPO is more than twice as accurate as STOAV. On the other hand, SAMPO is three times as expensive as STOAV with the use of a Cyber 170 computer. (author)

Rail Sensor Testbed Program: Active Agents in Containers for Transport Chain Security

Science.gov (United States)

2011-01-01

applied to a variety of regimes, including virtual communities [14], email [15] and ecommerce [16] and [17], and sensor networks [18]. These approaches...effective anti- spam tool. 2004(http://www.arxiv.org/abs/cond-mat/0402143). 16. Melnik, M., Alm, J., Does a seller’s eCommerce reputation matter

24 CFR 3.400 - Education programs or activities.

Science.gov (United States)

2010-04-01

... Urban Development NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education Programs or Activities... other sex. Such opportunities may be derived from either domestic or foreign sources. (d) Aids, benefits...

Cask technology program activities

International Nuclear Information System (INIS)

Allen, G.C. Jr.

1986-01-01

The civilian waste cask technology program consists of five major activities: (1) technical issue resolution directed toward NRC and DOT concerns, (2) system concept evaluations to determine the benefits of proposals made to DOE for transportation improvements, (3) applied technology and technical data tasks that provide independent information and enhance technology transfer between cask contractors, (4) standards development and code benchmarking that provide a service to DOE and cask contractors, and (5) testing to ensure the adequacy of cask designs. The program addresses broad issues that affect several cask development contractors and areas where independent technical input could enhance the Office of Civilian Radioactive Waste Management goals

MLS student active learning within a "cloud" technology program.

Science.gov (United States)

Tille, Patricia M; Hall, Heather

2011-01-01

In November 2009, the MLS program in a large public university serving a geographically large, sparsely populated state instituted an initiative for the integration of technology enhanced teaching and learning within the curriculum. This paper is intended to provide an introduction to the system requirements and sample instructional exercises used to create an active learning technology-based classroom. Discussion includes the following: 1.) define active learning and the essential components, 2.) summarize teaching methods, technology and exercises utilized within a "cloud" technology program, 3.) describe a "cloud" enhanced classroom and programming 4.) identify active learning tools and exercises that can be implemented into laboratory science programs, and 5.) describe the evaluation and assessment of curriculum changes and student outcomes. The integration of technology in the MLS program is a continual process and is intended to provide student-driven active learning experiences.

MODELING CIRCUMSTELLAR DISKS OF B-TYPE STARS WITH OBSERVATIONS FROM THE PALOMAR TESTBED INTERFEROMETER

International Nuclear Information System (INIS)

Grzenia, B. J.; Tycner, C.; Jones, C. E.; Sigut, T. A. A.; Rinehart, S. A.; Van Belle, G. T.

2013-01-01

Geometrical (uniform disk) and numerical models were calculated for a set of B-emission (Be) stars observed with the Palomar Testbed Interferometer (PTI). Physical extents have been estimated for the disks of a total of 15 stars via uniform disk models. Our numerical non-LTE models used parameters for the B0, B2, B5, and B8 spectral classes and following the framework laid by previous studies, we have compared them to infrared K-band interferometric observations taken at PTI. This is the first time such an extensive set of Be stars observed with long-baseline interferometry has been analyzed with self-consistent non-LTE numerical disk models.

Atmospheric Fluctuation Measurements with the Palomar Testbed Interferometer

Science.gov (United States)

Linfield, R. P.; Lane, B. F.; Colavita, M. M.; PTI Collaboration

Observations of bright stars with the Palomar Testbed Interferometer, at a wavelength of 2.2 microns, have been used to measure atmospheric delay fluctuations. The delay structure function Dτ(Δ t) was calculated for 66 scans (each >= 120s in length) on seven nights in 1997 and one in 1998. For all except one scan, Dτ exhibited a clean power law shape over the time interval 50-500 msec. Over shorter time intervals, the effect of the delay line servo loop corrupts Dτ. Over longer time intervals (usually starting at > 1s), the slope of Dτ decreases, presumably due to some combination of saturation e.g. finite turbulent layer thickness) and the effect of the finite wind speed crossing time on our 110 m baseline. The mean power law slopes for the eight nights ranged from 1.16 to 1.36, substantially flatter than the value of 1.67 for three dimensional Kolmogorov turbulence. Such sub-Kolmogorov slopes will result in atmospheric seeling (θ) that improves rapidly with increasing wavelength: θ propto λ1-(2β), where β is the observed power law slope of Dτ. The atmospheric errors in astrometric measurements with an interferometer will average down more quickly than in the Kolmogorov case.

Living with a Star Space Environment Testbed

Science.gov (United States)

Barth, Janet

2003-01-01

Summary of activities: (1) FYO1 NRA - Model development and data mining. (2) FY03 NRA - Flight investigations. (3) SET carrier development. (4) Study for accommodation of SET carrier to support advanced detectors. (5) Collaboration with other programs: LWS TR&T to maximize synergy between TR&T space environment research and SET space environment effects research. LWS Data System to optimize dissemination of SET data. NASA Electronic Parts and Packaging Program to leverage ground testing of technologies. Defense Threat Reduction Agency to leverage ground testing and common interests in advanced detectors. and Air Force Research Laboratory to leverage flight opportunities. (6) Education and Public Outreach.

OPNET/Simulink Based Testbed for Disturbance Detection in the Smart Grid

Energy Technology Data Exchange (ETDEWEB)

Sadi, Mohammad A. H. [University of Memphis; Dasgupta, Dipankar [ORNL; Ali, Mohammad Hassan [University of Memphis; Abercrombie, Robert K [ORNL

2015-01-01

The important backbone of the smart grid is the cyber/information infrastructure, which is primarily used to communicate with different grid components. A smart grid is a complex cyber physical system containing a numerous and variety number of sources, devices, controllers and loads. Therefore, the smart grid is vulnerable to grid related disturbances. For such dynamic system, disturbance and intrusion detection is a paramount issue. This paper presents a Simulink and Opnet based co-simulated platform to carry out a cyber-intrusion in cyber network for modern power systems and the smart grid. The IEEE 30 bus power system model is used to demonstrate the effectiveness of the simulated testbed. The experiments were performed by disturbing the circuit breakers reclosing time through a cyber-attack. Different disturbance situations in the considered test system are considered and the results indicate the effectiveness of the proposed co-simulated scheme.

A program for activation analysis data processing

International Nuclear Information System (INIS)

Janczyszyn, J.; Loska, L.; Taczanowski, S.

1978-01-01

An ALGOL program for activation analysis data handling is presented. The program may be used either for single channel spectrometry data or for multichannel spectrometry. The calculation of instrumental error and of analysis standard deviation is carried out. The outliers are tested, and the regression line diagram with the related observations are plotted by the program. (author)

Data systems for science integration within the Atmospheric Radiation Measurement Program

Energy Technology Data Exchange (ETDEWEB)

Gracio, D.K.; Hatfield, L.D.; Yates, K.R.; Voyles, J.W. [Pacific Northwest Lab., Richland, WA (United States); Tichler, J.L. [Brookhaven National Lab., Upton, NY (United States); Cederwall, R.T.; Laufersweiler, M.J.; Leach, M.J. [Lawrence Livermore National Lab., CA (United States); Singley, P. [Oak Ridge National Lab., TN (United States)

1995-12-31

The Atmospheric Radiation Measurement (ARM) Program was developed by the US Department of Energy to support the goals and mission of the US Global Change Research Program. The purpose of the ARM program is to improve the predictive capabilities of General Circulation Models (GCMs) in their treatment of clouds and radiative transfer effects. Three experimental testbeds were designed for the deployment of instruments to collect atmospheric data used to drive the GCMs. Each site, known as a Cloud and Radiation Testbed (CART), consists of a highly available, redundant data system for the collection of data from a variety of instrumentation. The first CART site was deployed in April 1992 in the Southern Great Plains (SGP), Lamont, Oklahoma, with the other two sites to follow in early 1996 in the Tropical Western Pacific (TWP) and in 1997 on the North Slope of Alaska (NSA). Approximately 1.5 GB of data are transferred per day via the Internet from the CART sites, and external data sources to the ARM Experiment Center (EC) at Pacific Northwest Laboratory in Richland, Washington. The Experimental Center is central to the ARM data path and provides for the collection, processing, analysis and delivery of ARM data. Data from the CART sites from a variety of instrumentation, observational systems and from external data sources are transferred to the Experiment Center. The EC processes these data streams on a continuous basis to provide derived data products to the ARM Science Team in near real-time while maintaining a three-month running archive of data.

Overview of the Novel Intelligent JAXA Active Rotor Program

Science.gov (United States)

Saito, Shigeru; Kobiki, Noboru; Tanabe, Yasutada; Johnson, Wayne; Yamauchi, Gloria K.; Young, Larry A.

2010-01-01

The Novel Intelligent JAXA Active Rotor (NINJA Rotor) program is a cooperative effort between JAXA and NASA, involving a test of a JAXA pressure-instrumented, active-flap rotor in the 40- by 80-Foot Wind Tunnel at Ames Research Center. The objectives of the program are to obtain an experimental database of a rotor with active flaps and blade pressure instrumentation, and to use that data to develop analyses to predict the aerodynamic and aeroacoustic performance of rotors with active flaps. An overview of the program is presented, including a description of the rotor and preliminary pretest calculations.

Extrasolar Planetary Imaging Coronagraph: Visible Nulling Coronagraph Testbed Results

Science.gov (United States)

Lyon, Richard G.

2008-01-01

The Extrasolar Planetary Imaging Coronagraph (EPIC) is a proposed NASA Discovery mission to image and characterize extrasolar giant planets in orbits with semi-major axes between 2 and 10 AU. EPIC will provide insights into the physical nature of a variety of planets in other solar systems complimenting radial velocity (RV) and astrometric planet searches. It will detect and characterize the atmospheres of planets identified by radial velocity surveys, determine orbital inclinations and masses, characterize the atmospheres around A and F stars, observed the inner spatial structure and colors of inner Spitzer selected debris disks. EPIC would be launched to heliocentric Earth trailing drift-away orbit, with a 3-year mission lifetime ( 5 year goal) and will revisit planets at least three times at intervals of 9 months. The starlight suppression approach consists of a visible nulling coronagraph (VNC) that enables high order starlight suppression in broadband light. To demonstrate the VNC approach and advance it's technology readiness the NASA Goddard Space Flight Center and Lockheed-Martin have developed a laboratory VNC and have demonstrated white light nulling. We will discuss our ongoing VNC work and show the latest results from the VNC testbed,

User's guide to the Reliability Estimation System Testbed (REST)

Science.gov (United States)

Nicol, David M.; Palumbo, Daniel L.; Rifkin, Adam

1992-01-01

The Reliability Estimation System Testbed is an X-window based reliability modeling tool that was created to explore the use of the Reliability Modeling Language (RML). RML was defined to support several reliability analysis techniques including modularization, graphical representation, Failure Mode Effects Simulation (FMES), and parallel processing. These techniques are most useful in modeling large systems. Using modularization, an analyst can create reliability models for individual system components. The modules can be tested separately and then combined to compute the total system reliability. Because a one-to-one relationship can be established between system components and the reliability modules, a graphical user interface may be used to describe the system model. RML was designed to permit message passing between modules. This feature enables reliability modeling based on a run time simulation of the system wide effects of a component's failure modes. The use of failure modes effects simulation enhances the analyst's ability to correctly express system behavior when using the modularization approach to reliability modeling. To alleviate the computation bottleneck often found in large reliability models, REST was designed to take advantage of parallel processing on hypercube processors.

Development of small-bore, high-current-density railgun as testbed for study of plasma-materials interaction. Progress report for October 16, 2000 - May 13, 2003

International Nuclear Information System (INIS)

Kyekyoon, Kim-Kevin

2003-01-01

The present document is a final technical report summarizing the progress made during 10/16/2000 - 05/13/2003 toward the development of a small-bore railgun with transaugmentation as a testbed for investigating plasma-materials interaction

A Rural Next Generation Network (R-NGN and Its Testbed

Directory of Open Access Journals (Sweden)

Armein Z. R. Langi

2007-05-01

Full Text Available Rural Next Generation Networks (R-NGN technology allows Internet protocol (IP based systems to be used in rural areas. This paper reports a testbed of R-NGN that uses low cost Ethernet radio links, combined with media gateways and a softswitch. The network consists of point-to-point IP Ethernet 2.4 GHz wireless link, IP switches and gateways in each community, standard copper wires and telephone sets for users. It uses low power consumption, and suitable for low density users. This combination allows low cost systems as well as multiservices (voice, data, and multimedia for rural communications. An infrastructure has been deployed in two communities in Cipicung Girang, a village 10 km outside Bandung city, Indonesia. Two towers link the communities with a network of Institut Teknologi Bandung (ITB campus. In addition, local wirelines connect community houses to the network. Currently there are four houses connected to each community node (for a total of eight house, upon which we can perform various tests and measurements.

A Rural Next Generation Network (R-NGN and Its Testbed

Directory of Open Access Journals (Sweden)

Armein Z. R. Langi

2013-09-01

Full Text Available Rural Next Generation Networks (R-NGN technology allows Internet protocol (IP based systems to be used in rural areas. This paper reports a testbed of R-NGN that uses low cost Ethernet radio links, combined with media gateways and a softswitch. The network consists of point-to-point IP Ethernet 2.4 GHz wireless link, IP switches and gateways in each community, standard copper wires and telephone sets for users. It uses low power consumption, and suitable for low density users. This combination allows low cost systems as well as multiservices (voice, data, and multimedia for rural communications. An infrastructure has been deployed in two communities in Cipicung Girang, a village 10 km outside Bandung city, Indonesia. Two towers link the communities with a network of Institut Teknologi Bandung (ITB campus. In addition, local wirelines connect community houses to the network. Currently there are four houses connected to each community node (for a total of eight house, upon which we can perform various tests and measurements.

Experimental aerodynamic and acoustic model testing of the Variable Cycle Engine (VCE) testbed coannular exhaust nozzle system: Comprehensive data report

Science.gov (United States)

Nelson, D. P.; Morris, P. M.

1980-01-01

The component detail design drawings of the one sixth scale model of the variable cycle engine testbed demonstrator exhaust syatem tested are presented. Also provided are the basic acoustic and aerodynamic data acquired during the experimental model tests. The model drawings, an index to the acoustic data, an index to the aerodynamic data, tabulated and graphical acoustic data, and the tabulated aerodynamic data and graphs are discussed.

Successful Physical Activity Programming for Students with Autism.

Science.gov (United States)

Schultheis, Susan F.; Boswell, Boni B.; Decker, Jim

2000-01-01

This article describes Success in Physical Activity, a program for students with autism. The program, based on adaptations of the Treatment and Education of Autistic and Related Communications-Handicapped Children (TEACCH) recreational structure program, focuses on two areas: physical fitness and motor ability. (Contains seven references.)…

Overview of the Transport Rotorcraft Airframe Crash Testbed (TRACT) Full Scale Crash Tests

Science.gov (United States)

Annett, Martin; Littell, Justin

2015-01-01

The Transport Rotorcraft Airframe Crash Testbed (TRACT) full-scale tests were performed at NASA Langley Research Center's Landing and Impact Research Facility in 2013 and 2014. Two CH-46E airframes were impacted at 33-ft/s forward and 25-ft/s vertical combined velocities onto soft soil, which represents a severe, but potentially survivable impact scenario. TRACT 1 provided a baseline set of responses, while TRACT 2 included retrofits with composite subfloors and other crash system improvements based on TRACT 1. For TRACT 2, a total of 18 unique experiments were conducted to evaluate Anthropomorphic Test Devices (ATD) responses, seat and restraint performance, cargo restraint effectiveness, patient litter behavior, and activation of emergency locator transmitters and crash sensors. Combinations of Hybrid II, Hybrid III, and ES-2 ATDs were placed in forward and side facing seats and occupant results were compared against injury criteria. The structural response of the airframe was assessed based on accelerometers located throughout the airframe and using three-dimensional photogrammetric techniques. Analysis of the photogrammetric data indicated regions of maximum deflection and permanent deformation. The response of TRACT 2 was noticeably different in the horizontal direction due to changes in the cabin configuration and soil surface, with higher acceleration and damage occurring in the cabin. Loads from ATDs in energy absorbing seats and restraints were within injury limits. Severe injury was likely for ATDs in forward facing passenger seats.

Implementation strategies for load center automation on the space station module/power management and distribution testbed

Science.gov (United States)

Watson, Karen

1990-01-01

The Space Station Module/Power Management and Distribution (SSM/PMAD) testbed was developed to study the tertiary power management on modules in large spacecraft. The main goal was to study automation techniques, not necessarily develop flight ready systems. Because of the confidence gained in many of automation strategies investigated, it is appropriate to study, in more detail, implementation strategies in order to find better trade-offs for nearer to flight ready systems. These trade-offs particularly concern the weight, volume, power consumption, and performance of the automation system. These systems, in their present implementation are described.

Deployment of a Testbed in a Brazilian Research Network using IPv6 and Optical Access Technologies

Science.gov (United States)

Martins, Luciano; Ferramola Pozzuto, João; Olimpio Tognolli, João; Chaves, Niudomar Siqueira De A.; Reggiani, Atilio Eduardo; Hortêncio, Claudio Antonio

2012-04-01

This article presents the implementation of a testbed and the experimental results obtained with it on the Brazilian Experimental Network of the government-sponsored "GIGA Project." The use of IPv6 integrated to current and emerging optical architectures and technologies, such as dense wavelength division multiplexing and 10-gigabit Ethernet on the core and gigabit capable passive optical network and optical distribution network on access, were tested. These protocols, architectures, and optical technologies are promising and part of a brand new worldwide technological scenario that has being fairly adopted in the networks of enterprises and providers of the world.

The development of the human exploration demonstration project (HEDP), a planetary systems testbed

Science.gov (United States)

Chevers, Edward S.; Korsmeyer, David J.

1993-01-01

The Human Exploration Demonstration Project (HEDP) is an ongoing task at the National Aeronautics and Space Administration's Ames Research Center to address the advanced technology requirements necessary to implement an integrated working and living environment for a planetary surface habitat. The integrated environment will consist of life support systems, physiological monitoring of project crew, a virtual environment workstation, and centralized data acquisition and habitat systems health monitoring. There will be several robotic systems on a simulated planetary landscape external to the habitat environment to provide representative work loads for the crew. This paper describes the status of the HEDP after one year, the major facilities composing the HEDP, the project's role as an Ames Research Center testbed, and the types of demonstration scenarios that will be run to showcase the technologies.

Digital pathology: DICOM-conform draft, testbed, and first results.

Science.gov (United States)

Zwönitzer, Ralf; Kalinski, Thomas; Hofmann, Harald; Roessner, Albert; Bernarding, Johannes

2007-09-01

Hospital information systems are state of the art nowadays. Therefore, Digital Pathology, also labelled as Virtual Microscopy, has gained increased attention. Triggered by radiology, standardized information models and workflows were world-wide defined based on DICOM. However, DICOM-conform integration of Digital Pathology into existing clinical information systems imposes new problems requiring specific solutions concerning the huge amount of data as well as the special structure of the data to be managed, transferred, and stored. We implemented a testbed to realize and evaluate the workflow of digitized slides from acquisition to archiving. The experiences led to the draft of a DICOM-conform information model that accounted for extensions, definitions, and technical requirements necessary to integrate digital pathology in a hospital-wide DICOM environment. Slides were digitized, compressed, and could be viewed remotely. Real-time transfer of the huge amount of data was optimized using streaming techniques. Compared to a recent discussion in the DICOM Working Group for Digital Pathology (WG26) our experiences led to a preference of a JPEG2000/JPIP-based streaming of the whole slide image. The results showed that digital pathology is feasible but strong efforts by users and vendors are still necessary to integrate Digital Pathology into existing information systems.

ONWI socioeconomic activities in support of SRPO socioeconomic program

International Nuclear Information System (INIS)

1986-03-01

The introduction describes the purpose of ONWI's Socioeconomic Program for SRPO nuclear waste repository program and the organization within ONWI dedicated to socioeconomic activities. Chapter 2 of this report, Statutory Requirements and Mission Plan Strategy, documents the specific directives and guidelines contained in the NWPA and in the Mission Plan that define DOE's socioeconomic responsibilities. Chapter 3, ONWI Socioeconomic Objectives and Activities to Assist SRPO, describes ONWI's socioeconomic objectives and provides a detailed discussion of the major activities planned to assist SRPO in the impact assessment, mitigation, and monitoring phases of the program. Chapter 4 lists references cited in the report. 15 refs., 8 figs., 3 tabs

A Future Accelerated Cognitive Distributed Hybrid Testbed for Big Data Science Analytics

Science.gov (United States)

Halem, M.; Prathapan, S.; Golpayegani, N.; Huang, Y.; Blattner, T.; Dorband, J. E.

2016-12-01

As increased sensor spectral data volumes from current and future Earth Observing satellites are assimilated into high-resolution climate models, intensive cognitive machine learning technologies are needed to data mine, extract and intercompare model outputs. It is clear today that the next generation of computers and storage, beyond petascale cluster architectures, will be data centric. They will manage data movement and process data in place. Future cluster nodes have been announced that integrate multiple CPUs with high-speed links to GPUs and MICS on their backplanes with massive non-volatile RAM and access to active flash RAM disk storage. Active Ethernet connected key value store disk storage drives with 10Ge or higher are now available through the Kinetic Open Storage Alliance. At the UMBC Center for Hybrid Multicore Productivity Research, a future state-of-the-art Accelerated Cognitive Computer System (ACCS) for Big Data science is being integrated into the current IBM iDataplex computational system `bluewave'. Based on the next gen IBM 200 PF Sierra processor, an interim two node IBM Power S822 testbed is being integrated with dual Power 8 processors with 10 cores, 1TB Ram, a PCIe to a K80 GPU and an FPGA Coherent Accelerated Processor Interface card to 20TB Flash Ram. This system is to be updated to the Power 8+, an NVlink 1.0 with the Pascal GPU late in 2016. Moreover, the Seagate 96TB Kinetic Disk system with 24 Ethernet connected active disks is integrated into the ACCS storage system. A Lightweight Virtual File System developed at the NASA GSFC is installed on bluewave. Since remote access to publicly available quantum annealing computers is available at several govt labs, the ACCS will offer an in-line Restricted Boltzmann Machine optimization capability to the D-Wave 2X quantum annealing processor over the campus high speed 100 Gb network to Internet 2 for large files. As an evaluation test of the cognitive functionality of the architecture, the

U.S. Immunization program adult immunization activities and resources

Science.gov (United States)

Woods, LaDora O.; Bridges, Carolyn B.; Graitcer, Samuel B.; Lamont, Brock

2016-01-01

ABSTRACT Adults are recommended to receive vaccines based on their age, medical conditions, prior vaccinations, occupation and lifestyle. However, adult immunization coverage is low in the United States and lags substantially below Healthy People 2020 goals. To assess activities and resources designated for adult immunization programs by state and local health department immunization programs in the United States, we analyzed 2012 and 2013 data from the Centers for Disease Control and Prevention's (CDC) Program Annual Reports and Progress Assessments (PAPA) survey of CDC-funded immunization programs. Fifty-six of 64 funded US immunization programs' responses were included in the analysis. Eighty-two percent of (n = 46) programs reported having a designated adult immunization coordinator in 2012 and 73% (n = 41) in 2013. Of the 46 coordinators reported in 2012, 30% (n = 14) spent more than 50% of their time on adult immunization activities, and only 24% (n = 10) of the 41 adult coordinators in 2013 spent more than 50% of their time on adult immunization activities. In 2012, 23% (n = 13) of the 56 programs had a separate immunization coalition for adults and 68% (n = 38) included adult issues in their overall immunization program coalition. In 2013, 25% (n = 14) had a separate adult immunization coalition while 57% (n = 32) incorporated adult immunizations into their overall immunization program coalition. The results indicate substantial variation across the US in public health infrastructure to support adult immunizations. Continued assessment of adult immunization resources and activities will be important in improving adult immunization coverage levels though program support. With many programs having limited resources dedicated to improving adult immunization rates in the in US, efforts by the health departments to collaborate with providers and other partners in their jurisdictions to increase awareness, increase the use of proven strategies to improve

Conceptual Design for a Dual-Bell Rocket Nozzle System Using a NASA F-15 Airplane as the Flight Testbed

Science.gov (United States)

Jones, Daniel S.; Ruf, Joseph H.; Bui, Trong T.; Martinez, Martel; St. John, Clinton W.

2014-01-01

The dual-bell rocket nozzle was first proposed in 1949, offering a potential improvement in rocket nozzle performance over the conventional-bell nozzle. Despite the performance advantages that have been predicted, both analytically and through static test data, the dual-bell nozzle has still not been adequately tested in a relevant flight environment. In 2013 a proposal was constructed that offered a National Aeronautics and Space Administration (NASA) F-15 airplane as the flight testbed, with the plan to operate a dual-bell rocket nozzle during captive-carried flight. If implemented, this capability will permit nozzle operation into an external flow field similar to that of a launch vehicle, and facilitate an improved understanding of dual-bell nozzle plume sensitivity to external flow-field effects. More importantly, this flight testbed can be utilized to help quantify the performance benefit with the dual-bell nozzle, as well as to advance its technology readiness level. Toward this ultimate goal, this report provides plans for future flights to quantify the external flow field of the airplane near the nozzle experiment, as well as details on the conceptual design for the dual-bell nozzle cold-flow propellant feed system integration within the NASA F-15 Propulsion Flight Test Fixture. The current study shows that this concept of flight research is feasible, and could result in valuable flight data for the dual-bell nozzle.

Sustainability of a physical activity and nutrition program for seniors.

Science.gov (United States)

Pasalich, M; Lee, A H; Jancey, J; Burke, L; Howat, P

2013-01-01

This prospective cohort study aimed to determine the impact of a low cost, home-based physical activity and nutrition program for older adults at 6 months follow-up. A follow-up survey was conducted 6 months after program completion via computer-assisted telephone interviewing. The International Physical Activity Questionnaire and the Fat and Fibre Barometer were used to measure physical activity levels and dietary behaviours, respectively. Self-reported height, weight, waist and hip circumferences were obtained. Changes over three time points of data collection (baseline, post-program, follow-up) and differences between the intervention and control groups were assessed. The use of program materials was also evaluated. Community and home-based. Insufficiently active 60 to 70 year olds (n = 176, intervention and n = 198, control) residing in suburbs within the Perth metropolitan area. A sustained improvement was observed for the intervention group in terms of fat avoidance behaviours (p interaction = .007). Significant improvements were found for strength exercises, fibre intake, body mass index and waist-to-hip ratio at either post-program or follow-up, however the overall effect was not significant. At post-program, the intervention group increased time spent participating in moderate activity by 50 minutes (p > .05), which was followed by a significant decline at follow-up (p nutrition intervention resulted in a sustained improvement in fat avoidance behaviours and overall short-term gains in physical activity. Future studies for older adults are recommended to investigate gender-specific behavioural barriers as well as booster interventions which focus on physical activity.

Design and construction of a testbed for the application of real volcanic ash from the Eyjafjallajökull and Grimsvötn eruptions to microgas turbines

Science.gov (United States)

Weber, Konradin; Fischer, Christian; Lange, Martin; Schulz, Uwe; Naraparaju, Ravisankar; Kramer, Dietmar

2017-04-01

It is well known that volcanic ash clouds emitted from erupting volcanoes pose a considerable threat to the aviation. The volcanic ash particles can damage the turbine blades and their thermal barrier coatings as well as the bearings of the turbine. For a detailed investigation of this damaging effect a testbed was designed and constructed, which allowed to study the damaging effects of real volcanic ash to an especially for these investigations modified microgas turbine. The use of this microgas turbine had the advantage that it delivers near reality conditions, using kerosene and operating at similar temperatures as big turbines, but at a very cost effective level. The testbed consisted out of a disperser for the real volcanic ash and all the equipment needed to control the micro gas turbine. Moreover, in front and behind the microgas turbine the concentration and the distribution of the volcanic ash were measured online by optical particle counters (OPCs). The particle concentration and size distribution of the volcanic ash particles in the intake in front of the microgas turbine was measured by an optical particle counter (OPC) combined with an isokinetic intake. Behind the microgas turbine in the exhaust gas additionally to the measurement with a second OPC ash particles were caught with an impactor, in order to enable the later analysis with an electron microscope concerning the morphology to verify possible melting processes of the ash particles. This testbed is of high importance as it allows detailed investigations of the impact of volcanic ash to jet turbines and appropriate countermeasures.

UWALK: the development of a multi-strategy, community-wide physical activity program.

Science.gov (United States)

Jennings, Cally A; Berry, Tanya R; Carson, Valerie; Culos-Reed, S Nicole; Duncan, Mitch J; Loitz, Christina C; McCormack, Gavin R; McHugh, Tara-Leigh F; Spence, John C; Vallance, Jeff K; Mummery, W Kerry

2017-03-01

UWALK is a multi-strategy, multi-sector, theory-informed, community-wide approach using e and mHealth to promote physical activity in Alberta, Canada. The aim of UWALK is to promote physical activity, primarily via the accumulation of steps and flights of stairs, through a single over-arching brand. This paper describes the development of the UWALK program. A social ecological model and the social cognitive theory guided the development of key strategies, including the marketing and communication activities, establishing partnerships with key stakeholders, and e and mHealth programs. The program promotes the use of physical activity monitoring devices to self-monitor physical activity. This includes pedometers, electronic devices, and smartphone applications. In addition to entering physical activity data manually, the e and mHealth program provides the function for objective data to be automatically uploaded from select electronic devices (Fitbit®, Garmin and the smartphone application Moves) The RE-AIM framework is used to guide the evaluation of UWALK. Funding for the program commenced in February 2013. The UWALK brand was introduced on April 12, 2013 with the official launch, including the UWALK website on September 20, 2013. This paper describes the development and evaluation framework of a physical activity promotion program. This program has the potential for population level dissemination and uptake of an ecologically valid physical activity promotion program that is evidence-based and theoretically framed.

The ACTIVATE study: results from a group-randomized controlled trial comparing a traditional worksite health promotion program with an activated consumer program.

Science.gov (United States)

Terry, Paul E; Fowles, Jinnet Briggs; Xi, Min; Harvey, Lisa

2011-01-01

PURPOSE. This study compares a traditional worksite-based health promotion program with an activated consumer program and a control program DESIGN. Group randomized controlled trial with 18-month intervention. SETTING. Two large Midwestern companies. SUBJECTS. Three hundred and twenty employees (51% response). INTERVENTION. The traditional health promotion intervention offered population-level campaigns on physical activity, nutrition, and stress management. The activated consumer intervention included population-level campaigns for evaluating health information, choosing a health benefits plan, and understanding the risks of not taking medications as prescribed. The personal development intervention (control group) offered information on hobbies. The interventions also offered individual-level coaching for high risk individuals in both active intervention groups. MEASURES. Health risk status, general health status, consumer activation, productivity, and the ability to evaluate health information. ANALYSIS. Multivariate analyses controlled for baseline differences among the study groups. RESULTS. At the population level, compared with baseline performance, the traditional health promotion intervention improved health risk status, consumer activation, and the ability to recognize reliable health websites. Compared with baseline performance, the activated consumer intervention improved consumer activation, productivity, and the ability to recognize reliable health websites. At the population level, however, only the activated consumer intervention improved any outcome more than the control group did; that outcome was consumer activation. At the individual level for high risk individuals, both traditional health coaching and activated consumer coaching positively affected health risk status and consumer activation. In addition, both coaching interventions improved participant ability to recognize a reliable health website. Consumer activation coaching also

10 CFR 5.400 - Education programs or activities.

Science.gov (United States)

2010-01-01

... Energy NUCLEAR REGULATORY COMMISSION NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Discrimination on the Basis of Sex in Education Programs or... other sex. Such opportunities may be derived from either domestic or foreign sources. (d) Aids, benefits...

ACTIV - a program for automatic processing of gamma-ray spectra

International Nuclear Information System (INIS)

Zlokazov, V.B.

1982-01-01

Program ACTIV is intended for precise analysis of γ-rays and X-ray spectra and allows the user to carry out the full cycle of automatic processing of a series of spectra, i.e. calibration, automatic peak search, determination of peak positions and areas, identification of the radioisotopes and the transformation of the areas found into masses of isotopes in the irradiated sample. ACTIV uses a complex mathematical technique and is oriented mainly to large computers, but using overlaid loading, it can be run also on small computers like the PDP 11/70. Compared with other similar programs, ACTIV has some advantages in accuracy of peak shape description and in the reliability of the peak search and its least-square analysis. The program can be used for the purpose of activation analysis. The program can analyze spectra with poor statistics and with broad and narrow peaks. (orig.)

32 CFR 199.16 - Supplemental Health Care Program for active duty members.

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Supplemental Health Care Program for active duty... (CHAMPUS) § 199.16 Supplemental Health Care Program for active duty members. (a) Purpose and applicability... the supplemental health care program for active duty members of the uniformed services, the provision...

Monitoring activities review of the Radiological Environmental Surveillance Program

International Nuclear Information System (INIS)

Ritter, P.D.

1992-03-01

The 1992 Monitoring Activities Review (MAR) is directed at the Radiological Environment Surveillance Program (RESP) activities at the Radioactive Waste Management Complex (RWMC) of Idaho Engineering Laboratory (INEL). MAR panelists studied RESP documents and discussed their concerns with Environmental Monitoring Unit (EMU) staff and other panel members. These concerns were subsequently consolidated into a collection of recommendations with supporting discussions. Recommendations focus on specific monitoring activities, as well as the overall program. The MAR report also contains pertinent comments that should not require further action

The GNP testbed for operator support evaluation

International Nuclear Information System (INIS)

Goodstein, L.P.; Hedegaard, J.; Hoejberg, K.S.; Lind, M.

1984-11-01

The GNP project is an outgrowth of our work over the past few years in the area of man-machine system representation and modelling - particularly with an eye towards studying the activities of diagnosis and decision making in connection with complex technical systems. Previous publications have dealt with the conceptual basis for this work. However, there was felt to be a need for a realistic test bed of a reasonable (and variable) complexity for evaluating the concepts by means of a suitably designed experimental program. This paper will thus describe the socalled GNP project and the associated activity to date. The following points will be covered: - GNP as a prototypical process - GNP as a simulation - The current GNP experimental setup at Risoe - Initial GNP - Experiments at Risoe - Planning - Experience to date. (author)

75 FR 66699 - Farm Loan Programs Loan Making Activities; Correction

Science.gov (United States)

2010-10-29

... Loan Programs Loan Making Activities; Correction AGENCY: Farm Service Agency, USDA. ACTION: Proposed rule; correction. SUMMARY: This document contains a correction to the proposed rule titled ``Farm Loan Programs Loan Making Activities'' that was published September 23, 2010. The Farm Service Agency (FSA) is...

Comprehensive School Physical Activity Programs: Recommendations for Physical Education Teacher Education

Science.gov (United States)

Zhang, Xiaoxia; Gu, Xiangli; Zhang, Tao; Keller, Jean; Chen, Senlin

2018-01-01

Comprehensive school physical activity programs (CSPAPs) aim to promote physical activity and healthy lifestyles among school-age children and adolescents. Physical educators are highly qualified individuals taking on the role of certified physical activity leaders. Physical education teacher education (PETE) programs should consider preparing…

SMART Optimization of a Parenting Program for Active Duty Families

Science.gov (United States)

2017-10-01

child and caregiver outcomes over time, based on a sample of 200 military personnel and their co- parents who have recently or will soon separate from...AWARD NUMBER: W81XWH-16-1-0407 TITLE: SMART Optimization of a Parenting Program for Active Duty Families PRINCIPAL INVESTIGATOR: Abigail...Optimization of a Parenting Program for Active Duty 5a. CONTRACT NUMBER Families 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Abigail

Data management and scientific integration within the Atmospheric Radiation Measurement Program

Science.gov (United States)

Gracio, Deborah K.; Hatfield, Larry D.; Yates, Kenneth R.; Voyles, Jimmy W.; Tichler, Joyce L.; Cederwall, Richard T.; Laufersweiler, Mark J.; Leach, Martin J.; Singley, Paul

1995-01-01

The Atmospheric Radiation Measurement (ARM) Program has been developed by the U.S. Department of Energy with the goal to improve the predictive capabilities of General Circulation Models (GCM's) in their treatment of clouds and radiative transfer effects. To achieve this goal, three experimental testbeds were designed for the deployment of instruments that will collect atmospheric data used to drive the GCM's. Each site, known as a Cloud and Radiation Testbed (CART), consists of a highly available, redundant data system for the collection of data from a variety of instrumentation. The first CART site was deployed in April 1992 in the Southern Great Plains (SGP), Lamont, Oklahoma, with the other two sites to follow in September 1995 in the Tropical Western Pacific and in 1997 on the North Slope of Alaska. Approximately 400 MB of data are transferred per day via the Internet from the SGP site to the ARM Experiment Center at Pacific Northwest Laboratory in Richland, Washington. The Experiment Center is central to the ARM data path and provides for the collection, processing, analysis, and delivery of ARM data. Data are received from the CART sites from a variety of instrumentation, observational systems, amd external data sources. The Experiment Center processes these data streams on a continuous basis to provide derived data products to the ARM Science Team in near real-time while providing a three-month running archive of data. A primary requirement of the ARM Program is to preserve and protect all data produced or acquired. This function is performed at Oak Ridge National Laboratory where leading edge technology is employed for the long-term storage of ARM data. The ARM Archive provides access to data for participation outside of the ARM Program. The ARM Program involves a collaborative effort by teams from various DOE National Laboratories, providing multi-disciplinary areas of expertise. This paper will discuss the collaborative methods in which the ARM teams

Clean Coal Program Research Activities

Energy Technology Data Exchange (ETDEWEB)

Larry Baxter; Eric Eddings; Thomas Fletcher; Kerry Kelly; JoAnn Lighty; Ronald Pugmire; Adel Sarofim; Geoffrey Silcox; Phillip Smith; Jeremy Thornock; Jost Wendt; Kevin Whitty

2009-03-31

Although remarkable progress has been made in developing technologies for the clean and efficient utilization of coal, the biggest challenge in the utilization of coal is still the protection of the environment. Specifically, electric utilities face increasingly stringent restriction on the emissions of NO{sub x} and SO{sub x}, new mercury emission standards, and mounting pressure for the mitigation of CO{sub 2} emissions, an environmental challenge that is greater than any they have previously faced. The Utah Clean Coal Program addressed issues related to innovations for existing power plants including retrofit technologies for carbon capture and sequestration (CCS) or green field plants with CCS. The Program focused on the following areas: simulation, mercury control, oxycoal combustion, gasification, sequestration, chemical looping combustion, materials investigations and student research experiences. The goal of this program was to begin to integrate the experimental and simulation activities and to partner with NETL researchers to integrate the Program's results with those at NETL, using simulation as the vehicle for integration and innovation. The investigators also committed to training students in coal utilization technology tuned to the environmental constraints that we face in the future; to this end the Program supported approximately 12 graduate students toward the completion of their graduate degree in addition to numerous undergraduate students. With the increased importance of coal for energy independence, training of graduate and undergraduate students in the development of new technologies is critical.

Active vibration control testing of the SPICES program: final demonstration article

Science.gov (United States)

Dunne, James P.; Jacobs, Jack H.

1996-05-01

The Synthesis and Processing of Intelligent Cost Effective Structures (SPICES) Program is a partnership program sponsored by the Advanced Research Projects Agency. The mission of the program is to develop cost effective material processing and synthesis technologies to enable new products employing active vibration suppression and control devices to be brought to market. The two year program came to fruition in 1995 through the fabrication of the final smart components and testing of an active plate combined with two trapezoidal rails, forming an active mount. Testing of the SPICES combined active mount took place at McDonnell Douglas facilities in St. Louis, MO, in October-December 1995. Approximately 15 dB reduction in overall response of a motor mounted on the active structure was achieved. Further details and results of the SPICES combined active mount demonstration testing are outlined. Results of numerous damping and control strategies that were developed and employed in the testing are presented, as well as aspects of the design and fabrication of the SPICES active mount components.

Ad Hoc on-Demand Distance Vector (AODV Routing Protocol Performance Evaluation on Hybrid Ad Hoc Network: Comparison of Result of Ns-2 Simulation and Implementation on Testbed using PDA

Directory of Open Access Journals (Sweden)

Riri Sari

2010-10-01

Full Text Available In Mobile Ad hoc NETwork (MANET, node supplemented with wireless equipment has the capacity to manage and organise autonomously, without the presence of network infrastructures. Hybrid ad hoc network, enable several nodes to move freely (mobile to create instant communication. Independent from infrastructure. They could access the Local Area Network (LAN or the Internet. Functionalities of ad hoc network very much dependent on the routing protocol that determines the routing around node. Ad hoc On-demand Distance Vector (AODV is one of routing protocols in ad hoc network which has a reactive characteristic. This protocol is the most common protocol being researched and used. In this Research, AODV protocol investigation was conducted by developing a testbed using Personal Computer, several Laptops (the Linux Red Hat operation system 9.0 and Fedora Core 2, and Personal Digital Assistant (PDA. This research also made a complete package by mean of cross compilation for PDA iPAQ. In general, results obtained from the simulation of AODV protocol using Network Simulator NS-2 are packet delivery ratio 99.89%, end-to-end delay of 0.14 seconds and routing overhead of 1,756.61 byte per second. Afterwards results from simulation were compared to results from testbed. Results obtained from testbed are as follows: the packet delivery ratio is 99.57%, the end-to-end delay is 1.004 seconds and the routing overhead is 1,360.36 byte per second.

Status of the tokamak program

Science.gov (United States)

Sheffield, J.

1981-08-01

For a specific configuration of magnetic field and plasma to be economically attractive as a commercial source of energy, it must contain a high-pressure plasma in a stable fashion while thermally isolating the plasma from the walls of the containment vessel. The tokamak magnetic configuration is presently the most successful in terms of reaching the considered goals. Tokamaks were developed in the USSR in a program initiated in the mid-1950s. By the early 1970s tokamaks were operating not only in the USSR but also in the U.S., Australia, Europe, and Japan. The advanced state of the tokamak program is indicated by the fact that it is used as a testbed for generic fusion development - for auxiliary heating, diagnostics, materials - as well as for specific tokamak advancement. This has occurred because it is the most economic source of a large, reproducible, hot, dense plasma. The basic tokamak is considered along with tokamak improvements, impurity control, additional heating, particle and power balance in a tokamak, aspects of microscopic transport, and macroscopic stability.

Extrasolar Planetary Imaging Coronagraph (EPIC): visible nulling cornagraph testbed results

Science.gov (United States)

Lyon, Richard G.; Clampin, Mark; Melnick, Gary; Tolls, Volker; Woodruff, Robert; Vasudevan, Gopal

2008-07-01

The Extrasolar Planetary Imaging Coronagraph (EPIC) is a NASA Astrophysics Strategic Mission Concept under study for the upcoming Exoplanet Probe. EPIC's mission would be to image and characterize extrasolar giant planets, and potential super-Earths, in orbits with semi-major axes between 2 and 10 AU. EPIC will provide insights into the physical nature of a variety of planets in other solar systems complimenting radial velocity (RV) and astrometric planet searches. It will detect and characterize the atmospheres of planets identified by radial velocity surveys and potentially some transits, determine orbital inclinations and masses, characterize the atmospheres of gas giants around A and F stars, observed the inner spatial structure and colors of inner Spitzer selected debris disks. EPIC would be launched into a heliocentric Earth trailing drift-away orbit, with a 3-year mission lifetime (5 year goal) and will revisit planets at least three times. The starlight suppression approach consists of a visible nulling coronagraph (VNC) that enables high order starlight suppression in broadband light. To demonstrate the VNC approach and advance it's technology readiness the NASA/Goddard Space Flight Center and Lockheed-Martin have developed a laboratory VNC and have demonstrated white light nulling. We will discuss our ongoing VNC work and show the latest results from the VNC testbed.

Comparative Effectiveness of After-School Programs to Increase Physical Activity

Directory of Open Access Journals (Sweden)

Sabina B. Gesell

2013-01-01

Full Text Available Background. We conducted a comparative effectiveness analysis to evaluate the difference in the amount of physical activity children engaged in when enrolled in a physical activity-enhanced after-school program based in a community recreation center versus a standard school-based after-school program. Methods. The study was a natural experiment with 54 elementary school children attending the community ASP and 37 attending the school-based ASP. Accelerometry was used to measure physical activity. Data were collected at baseline, 6 weeks, and 12 weeks, with 91% retention. Results. At baseline, 43% of the multiethnic sample was overweight/obese, and the mean age was 7.9 years (SD = 1.7. Linear latent growth models suggested that the average difference between the two groups of children at Week 12 was 14.7 percentage points in moderate-vigorous physical activity (P<.001. Cost analysis suggested that children attending traditional school-based ASPs—at an average cost of $17.67 per day—would need an additional daily investment of $1.59 per child for 12 weeks to increase their moderate-vigorous physical activity by a model-implied 14.7 percentage points. Conclusions. A low-cost, alternative after-school program featuring adult-led physical activities in a community recreation center was associated with increased physical activity compared to standard-of-care school-based after-school program.

Thermal and Fluid Modeling of the CRYogenic Orbital TEstbed (CRYOTE) Ground Test Article (GTA)

Science.gov (United States)

Piryk, David; Schallhorn, Paul; Walls, Laurie; Stopnitzky, Benny; Rhys, Noah; Wollen, Mark

2012-01-01

The purpose of this study was to anchor thermal and fluid system models to data acquired from a ground test article (GTA) for the CRYogenic Orbital TEstbed - CRYOTE. To accomplish this analysis, it was broken into four primary tasks. These included model development, pre-test predictions, testing support at Marshall Space Flight Center (MSFC} and post-test correlations. Information from MSFC facilitated the task of refining and correlating the initial models. The primary goal of the modeling/testing/correlating efforts was to characterize heat loads throughout the ground test article. Significant factors impacting the heat loads included radiative environments, multi-layer insulation (MLI) performance, tank fill levels, tank pressures, and even contact conductance coefficients. This paper demonstrates how analytical thermal/fluid networks were established, and it includes supporting rationale for specific thermal responses seen during testing.

Automated tools and techniques for distributed Grid Software Development of the testbed infrastructure

CERN Document Server

Aguado Sanchez, C

2007-01-01

Grid technology is becoming more and more important as the new paradigm for sharing computational resources across different organizations in a secure way. The great powerfulness of this solution, requires the definition of a generic stack of services and protocols and this is the scope of the different Grid initiatives. As a result of international collaborations for its development, the Open Grid Forum created the Open Grid Services Architecture (OGSA) which aims to define the common set of services that will enable interoperability across the different implementations. This master thesis has been developed in this framework, as part of the two European-funded projects ETICS and OMII-Europe. The main objective is to contribute to the design and maintenance of large distributed development projects with the automated tool that enables to implement Software Engineering techniques oriented to achieve an acceptable level of quality at the release process. Specifically, this thesis develops the testbed concept a...

Physical Activity for Campus Employees: A University Worksite Wellness Program.

Science.gov (United States)

Butler, Carling E; Clark, B Ruth; Burlis, Tamara L; Castillo, Jacqueline C; Racette, Susan B

2015-04-01

Workplaces provide ideal environments for wellness programming. The purpose of this study was to explore exercise self-efficacy among university employees and the effects of a worksite wellness program on physical activity, cardiorespiratory fitness, and cardiovascular disease (CVD) risk factors. Participants included 121 university employees (85% female). The worksite wellness program included cardiovascular health assessments, personal health reports, 8 weeks of pedometer-based walking and tracking activities, and weekly wellness sessions. Daily step count was assessed at baseline, Week 4, and Week 8. Exercise self-efficacy and CVD risk factors were evaluated at baseline and follow-up. Daily step count increased from 6566 ± 258 (LSM ± SE) at baseline to 8605 ± 356 at Week 4 and 9107 ± 388 at Week 8 (P physical activity, cardiorespiratory fitness, and CVD risk factors among university employees. Exercise barriers and outcome expectations were identified and have implications for future worksite wellness programming.

The GridEcon Platform: A Business Scenario Testbed for Commercial Cloud Services

Science.gov (United States)

Risch, Marcel; Altmann, Jörn; Guo, Li; Fleming, Alan; Courcoubetis, Costas

Within this paper, we present the GridEcon Platform, a testbed for designing and evaluating economics-aware services in a commercial Cloud computing setting. The Platform is based on the idea that the exact working of such services is difficult to predict in the context of a market and, therefore, an environment for evaluating its behavior in an emulated market is needed. To identify the components of the GridEcon Platform, a number of economics-aware services and their interactions have been envisioned. The two most important components of the platform are the Marketplace and the Workflow Engine. The Workflow Engine allows the simple composition of a market environment by describing the service interactions between economics-aware services. The Marketplace allows trading goods using different market mechanisms. The capabilities of these components of the GridEcon Platform in conjunction with the economics-aware services are described in this paper in detail. The validation of an implemented market mechanism and a capacity planning service using the GridEcon Platform also demonstrated the usefulness of the GridEcon Platform.

Time Distribution Using SpaceWire in the SCaN Testbed on ISS

Science.gov (United States)

Lux, James P.

2012-01-01

A paper describes an approach for timekeeping and time transfer among the devices on the CoNNeCT project s SCaN Testbed. It also describes how the clocks may be synchronized with an external time reference; e.g., time tags from the International Space Station (ISS) or RF signals received by a radio (TDRSS time service or GPS). All the units have some sort of counter that is fed by an oscillator at some convenient frequency. The basic problem in timekeeping is relating the counter value to some external time standard such as UTC. With SpaceWire, there are two approaches possible: one is to just use SpaceWire to send a message, and use an external wire for the sync signal. This is much the same as with the RS- 232 messages and l pps line from a GPS receiver. However, SpaceWire has an additional capability that was added to make it easier - it can insert and receive a special "timecode" word in the data stream.

An updated radiation protection program prospectus based on 20 years of data describing program drivers and activities.

Science.gov (United States)

Emery, Robert J; Gutierrez, Janet M

2014-08-01

In 1992, the University of Texas Health Science Center at Houston (UTHSCH) Radiation Safety Program began assembling data on a monthly basis that described various program drivers and associated activities. At the end of calendar year 2002, a decade of data had been collected, so the information was summarized into a novel program prospectus, displaying various program indicator parameters in a format similar to that used in a commercial enterprise prospectus provided to potential investors. The consistent formatting of the data afforded a succinct and easily digestible snapshot of program activities and trends. Feedback from various program stakeholders, even those unfamiliar with radiation safety matters, was overwhelmingly positive. By the end of 2012, a total of 20 years of data had been collected, so an updated and slightly modified prospectus was created. The summary document has helped to describe the drivers of the program, revealed some interesting trends, and has aided in maintaining program support even in challenging economic times. The data summary has also proved to be useful in making future projections regarding program needs.

Cask technology program activities

International Nuclear Information System (INIS)

Allen, G.C. Jr.

1986-01-01

The civilian waste cask technology program consists of five major activities: Technical issue resolution directed toward NRC and DOT concerns; system concept evaluations to determine the benefits of proposals made to DOE for transportation improvements; applied technology and technical data tasks that provide independent information and enhance technology transfer between cask contractors; standards development and code benchmarking that provide a service to DOE and cask contractors; and testing to ensure the adequacy of cask designs. This paper addresses broad issues that affect several cask development contractors and areas where independent technical input could enhance OCRWM goals

Active Aging Promotion: Results from the Vital Aging Program

Directory of Open Access Journals (Sweden)

Mariagiovanna Caprara

2013-01-01

Full Text Available Active aging is one of the terms in the semantic network of aging well, together with others such as successful, productive, competent aging. All allude to the new paradigm in gerontology, whereby aging is considered from a positive perspective. Most authors in the field agree active aging is a multidimensional concept, embracing health, physical and cognitive fitness, positive affect and control, social relationships and engagement. This paper describes Vital Aging, an individual active aging promotion program implemented through three modalities: Life, Multimedia, and e-Learning. The program was developed on the basis of extensive evidence about individual determinants of active aging. The different versions of Vital Aging are described, and four evaluation studies (both formative and summative are reported. Formative evaluation reflected participants’ satisfaction and expected changes; summative evaluations yielded some quite encouraging results using quasi-experimental designs: those who took part in the programs increased their physical exercise, significantly improved their diet, reported better memory, had better emotional balance, and enjoyed more cultural, intellectual, affective, and social activities than they did before the course, thus increasing their social relationships. These results are discussed in the context of the common literature within the field and, also, taking into account the limitations of the evaluations accomplished.

Active aging promotion: results from the vital aging program.

Science.gov (United States)

Caprara, Mariagiovanna; Molina, María Ángeles; Schettini, Rocío; Santacreu, Marta; Orosa, Teresa; Mendoza-Núñez, Víctor Manuel; Rojas, Macarena; Fernández-Ballesteros, Rocío

2013-01-01

Active aging is one of the terms in the semantic network of aging well, together with others such as successful, productive, competent aging. All allude to the new paradigm in gerontology, whereby aging is considered from a positive perspective. Most authors in the field agree active aging is a multidimensional concept, embracing health, physical and cognitive fitness, positive affect and control, social relationships and engagement. This paper describes Vital Aging, an individual active aging promotion program implemented through three modalities: Life, Multimedia, and e-Learning. The program was developed on the basis of extensive evidence about individual determinants of active aging. The different versions of Vital Aging are described, and four evaluation studies (both formative and summative) are reported. Formative evaluation reflected participants' satisfaction and expected changes; summative evaluations yielded some quite encouraging results using quasi-experimental designs: those who took part in the programs increased their physical exercise, significantly improved their diet, reported better memory, had better emotional balance, and enjoyed more cultural, intellectual, affective, and social activities than they did before the course, thus increasing their social relationships. These results are discussed in the context of the common literature within the field and, also, taking into account the limitations of the evaluations accomplished.

Tower-Based Greenhouse Gas Measurement Network Design---The National Institute of Standards and Technology North East Corridor Testbed.

Science.gov (United States)

Lopez-Coto, Israel; Ghosh, Subhomoy; Prasad, Kuldeep; Whetstone, James

2017-09-01

The North-East Corridor (NEC) Testbed project is the 3rd of three NIST (National Institute of Standards and Technology) greenhouse gas emissions testbeds designed to advance greenhouse gas measurements capabilities. A design approach for a dense observing network combined with atmospheric inversion methodologies is described. The Advanced Research Weather Research and Forecasting Model with the Stochastic Time-Inverted Lagrangian Transport model were used to derive the sensitivity of hypothetical observations to surface greenhouse gas emissions (footprints). Unlike other network design algorithms, an iterative selection algorithm, based on a k -means clustering method, was applied to minimize the similarities between the temporal response of each site and maximize sensitivity to the urban emissions contribution. Once a network was selected, a synthetic inversion Bayesian Kalman filter was used to evaluate observing system performance. We present the performances of various measurement network configurations consisting of differing numbers of towers and tower locations. Results show that an overly spatially compact network has decreased spatial coverage, as the spatial information added per site is then suboptimal as to cover the largest possible area, whilst networks dispersed too broadly lose capabilities of constraining flux uncertainties. In addition, we explore the possibility of using a very high density network of lower cost and performance sensors characterized by larger uncertainties and temporal drift. Analysis convergence is faster with a large number of observing locations, reducing the response time of the filter. Larger uncertainties in the observations implies lower values of uncertainty reduction. On the other hand, the drift is a bias in nature, which is added to the observations and, therefore, biasing the retrieved fluxes.

Effectiveness of School-Initiated Physical Activity Program on Secondary School Students' Physical Activity Participation

Science.gov (United States)

Gråstén, Arto; Yli-Piipari, Sami; Watt, Anthony; Jaakkola, Timo; Liukkonen, Jarmo

2015-01-01

Background: The promotion of physical activity and health has become a universal challenge. The Sotkamo Physical Activity as Civil Skill Program was implemented to increase students' physical activity by promoting supportive psychological and physical school environment. The aim of this study was to evaluate the effectiveness of the…

Report of the Integrated Program Planning Activity for the DOE Fusion Energy Sciences Program

International Nuclear Information System (INIS)

None

2000-01-01

This report of the Integrated Program Planning Activity (IPPA) has been prepared in response to a recommendation by the Secretary of Energy Advisory Board that, ''Given the complex nature of the fusion effort, an integrated program planning process is an absolute necessity.'' We, therefore, undertook this activity in order to integrate the various elements of the program, to improve communication and performance accountability across the program, and to show the inter-connectedness and inter-dependency of the diverse parts of the national fusion energy sciences program. This report is based on the September 1999 Fusion Energy Sciences Advisory Committee's (FESAC) report ''Priorities and Balance within the Fusion Energy Sciences Program''. In its December 5,2000, letter to the Director of the Office of Science, the FESAC has reaffirmed the validity of the September 1999 report and stated that the IPPA presents a framework and process to guide the achievement of the 5-year goals listed in the 1999 report. The National Research Council's (NRC) Fusion Assessment Committee draft final report ''An Assessment of the Department of Energy's Office of Fusion Energy Sciences Program'', reviewing the quality of the science in the program, was made available after the IPPA report had been completed. The IPPA report is, nevertheless, consistent with the recommendations in the NRC report. In addition to program goals and the related 5-year, 10-year, and 15-year objectives, this report elaborates on the scientific issues associated with each of these objectives. The report also makes clear the relationships among the various program elements, and cites these relationships as the reason why integrated program planning is essential. In particular, while focusing on the science conducted by the program, the report addresses the important balances between the science and energy goals of the program, between the MFE and IFE approaches, and between the domestic and international aspects

Case Study of an Institutionalized Urban Comprehensive School Physical Activity Program

Science.gov (United States)

Doolittle, Sarah A.; Rukavina, Paul B.

2014-01-01

This single case study (Yin, 2009) compares an established urban physical education/ sport/physical activity program with two models: Comprehensive School Physical Activity Program/CSPAP (AAHPERD, 2013; CDC, 2013); and Lawson's propositions (2005) for sport, exercise and physical education for empowerment and community development to determine…

Programs of Active Aging – A Relation between BMI and Triglycerides

Directory of Open Access Journals (Sweden)

Samuel Honório

2014-03-01

Full Text Available Objective: To enhance the importance of physical activity programs for elderly and their influence on BMI and triglycerides. Methods: The sample consisted of 91 elderly individuals, 63 females and 28 males aged between 65 and 78 years of age. All seniors practice water activities, including swimming and gymnastics. Were analyzed with respect to two aspects: BMI, Triglycerides and practice time, seniors who were physically active at least 2 months, and seniors who maintained habits of physical activity between 2 and 6 months and still accumulated 30 or more minutes of other activities. We have established contingency tables were confronted where the variables described in the analysis. Results: It was found that elderly who maintained physical activity programs were broader outnumbered those who were overweight and obesity rates in Table I of BMI, and lower triglycerides values. Conclusions: We concluded therefore that physical activity programs that contemplate 2 or more hours per week, duly organized and systematized constitute a positive factor in combating inactivity and turn into a more active and cheerful elderly.

Towards Autonomous Operations of the Robonaut 2 Humanoid Robotic Testbed

Science.gov (United States)

Badger, Julia; Nguyen, Vienny; Mehling, Joshua; Hambuchen, Kimberly; Diftler, Myron; Luna, Ryan; Baker, William; Joyce, Charles

2016-01-01

The Robonaut project has been conducting research in robotics technology on board the International Space Station (ISS) since 2012. Recently, the original upper body humanoid robot was upgraded by the addition of two climbing manipulators ("legs"), more capable processors, and new sensors, as shown in Figure 1. While Robonaut 2 (R2) has been working through checkout exercises on orbit following the upgrade, technology development on the ground has continued to advance. Through the Active Reduced Gravity Offload System (ARGOS), the Robonaut team has been able to develop technologies that will enable full operation of the robotic testbed on orbit using similar robots located at the Johnson Space Center. Once these technologies have been vetted in this way, they will be implemented and tested on the R2 unit on board the ISS. The goal of this work is to create a fully-featured robotics research platform on board the ISS to increase the technology readiness level of technologies that will aid in future exploration missions. Technology development has thus far followed two main paths, autonomous climbing and efficient tool manipulation. Central to both technologies has been the incorporation of a human robotic interaction paradigm that involves the visualization of sensory and pre-planned command data with models of the robot and its environment. Figure 2 shows screenshots of these interactive tools, built in rviz, that are used to develop and implement these technologies on R2. Robonaut 2 is designed to move along the handrails and seat track around the US lab inside the ISS. This is difficult for many reasons, namely the environment is cluttered and constrained, the robot has many degrees of freedom (DOF) it can utilize for climbing, and remote commanding for precision tasks such as grasping handrails is time-consuming and difficult. Because of this, it is important to develop the technologies needed to allow the robot to reach operator-specified positions as

Changes in physical functioning in the Active Living Every Day program of the Active for Life Initiative®.

Science.gov (United States)

Baruth, Meghan; Wilcox, Sara; Wegley, Stacy; Buchner, David M; Ory, Marcia G; Phillips, Alisa; Schwamberger, Karen; Bazzarre, Terry L

2011-09-01

Physical activity can prevent or delay the onset of physical functional limitations in older adults. There are limited data that evidence-based physical activity interventions can be successfully translated into community programs and result in similar benefits for physical functioning. The purpose of this study is to measure the effects of the Active Living Every Day program on physical functioning and physical functional limitations in a diverse sample of older adults. As a part of the Active for Life initiative, the Council on Aging of Southwestern Ohio implemented Active Living Every Day (ALED), a group-based lifestyle behavior change program designed to increase physical activity. Performance-based physical functioning tests (30-s Chair Stand Test, eight Foot Up-and-Go Test, Chair Sit-and-Reach Test, 30-Foot Walk Test) were administered to participants at baseline and posttest. Baseline to post-program changes in physical functioning and impairment status were examined with repeated measures analysis of covariance. Interactions tested whether change over time differed according to race/ethnicity, body mass index (BMI), and baseline impairment status. Participants significantly increased their performance in all four physical functioning tests. The percentage of participants classified as "impaired" according to normative data significantly decreased over time. Physical functioning improved regardless of BMI, race/ethnicity, or baseline impairment status. ALED is an example of an evidenced-based physical activity program that can be successfully translated into community programs and result in significant and clinically meaningful improvements in performance-based measures of physical functioning.

The California active aging community grant program: translating science into practice to promote physical activity in older adults.

Science.gov (United States)

Hooker, Steven P; Seavey, William; Weidmer, Curtiss E; Harvey, Danielle J; Stewart, Anita L; Gillis, Dawn E; Nicholl, Katrina Lennea; King, Abby C

2005-06-01

Attempts to study the translation of evidence-based physical activity interventions in community settings are scarce. This project was an investigation of whether 13 diverse local lead agencies could effectively implement a choice-based, telephone-assisted physical activity promotion program for older adults based on intervention models proven efficacious in research settings. At baseline, participants developed their own physical activity programs through an individualized planning session based on preference, health status, readiness to change, and available community resources. Thereafter, participants received regular telephone calls over a 1-year period from a trained staff member or volunteer support buddy. Additional program components consisted of health education workshops, newsletters, and group-based physical activities. Self-report data on caloric expenditure due to all and moderate or greater intensity physical activities were collected from 447 participants (M age = 68 +/- 8.6 years). A significant increase (p activity duration and frequency. These changes were observed in participants across all sites. The increases in weekly caloric expenditure were commensurate with findings from several previous randomized clinical trials. The utilization of community agency staff and volunteers receiving basic training to implement essential program components proved feasible. Very favorable levels of program satisfaction expressed by community staff, volunteer support buddies, and participants, combined with the significant increases in physical activity, warrant further dissemination of the intervention model.

Final Report-Rail Sensor Testbed Program: Active Agents in Containers for Transport Chain Security

Science.gov (United States)

2011-03-21

information. These trust approaches have been applied to a variety of regimes, including virtual communities [14], email [15] and ecommerce [16...2004(http://www .arxiv.org/abs/cond-mat/0402143). 16. Melnik, M., Aim, J., Does a seller’s eCommerce reputation matter? evidence from eBay auctions

Comparing responses to horticultural-based and traditional activities in dementia care programs.

Science.gov (United States)

Jarrott, Shannon E; Gigliotti, Christina M

2010-12-01

Engaging persons with dementia in meaningful activities supports well-being; however, care staff are challenged to implement age- and ability-appropriate activities in a group setting. We compared a randomly assigned treatment group, who received horticultural therapy-based (HT-based) programming to a comparison group, who engaged in traditional activities (TA) programming, on engagement and affect. Horticultural therapy-based programming was implemented twice weekly at 4 treatment sites for 6 weeks, while regular TA were observed at comparison sites. Results revealed no differences between groups on affective domains. Levels of adaptive behavior differed between the groups, with the treatment group demonstrating higher levels of active, passive, and other engagement and the comparison group demonstrating higher levels of self-engagement. Our results highlight the value of HT-based programs and the importance of simultaneously capturing participants' affective and behavioral responses. Theoretical and practical considerations about the facilitation of and context in which the programming occurs are discussed.

Building a visionary astrophysics program from the ground up

Science.gov (United States)

Mathews, Geoffrey S.; Barnes, Joshua Edward; Coleman, Paul; Gal, Roy R.; Meech, Karen J.; Mendez, Roberto Hugo; Nassir, Michael A.; Sanders, David B.

2015-08-01

The University of Hawaii’s Institute for Astronomy is in the process of implementing a new Bachelor of Science in Astrophysics at UH Manoa. This requires a significant adjustment in the role of the IfA, which has long been at the forefront of modern astronomy in Hawaii and is now broadening its educational mission. The IfA’s history of excellence in research and access to observational resources are expected to draw students from around the nation and the world. These factors have inspired our programmatic focus culminating in a senior year research experience. We expect that the program will produce many undergraduate astrophysics majors, making it an ideal testbed to apply modern theories of learning to the teaching of astrophysics. We have explicitly designed the major around three pillars: physical theory, the application of physics to astrophysical phenomena, and the development of core observational astronomy skills. We describe our cooperative approach to developing a program-level curriculum map of key concepts and skills, as well as descriptors of student success throughout the program. These are central tools for course design, program assessment, and professional development.

Mission Impossible? Physical Activity Programming for Individuals Experiencing Homelessness

Science.gov (United States)

Gregg, Melanie J.; Bedard, Andrea

2016-01-01

Purpose: A pilot study was conducted to describe the physical activity experiences and perceived benefits of and barriers to physical activity participation for patrons of a homeless shelter. The resulting pilot data may be used to inform the creation of and support for physical activity and sport programs for those experiencing homelessness.…

Development of educational program for neutron activation analysis

International Nuclear Information System (INIS)

Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Ryel, Sung; Kang, Young Hwan; Lee, Kil Yong; Yeon, Yeon Yel; Cho, Seung Yeon

2000-08-01

This technical report is developed to apply an educational and training program for graduate student and analyst utilizing neutron activation analysis. The contents of guide book consists of five parts as follows; introduction, gamma-ray spectrometry and measurement statistics, its applications, to understand of comprehensive methodology and to utilize a relevant knowledge and information on neutron activation analysis

Development of educational program for neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Ryel, Sung; Kang, Young Hwan; Lee, Kil Yong; Yeon, Yeon Yel; Cho, Seung Yeon

2000-08-01

This technical report is developed to apply an educational and training program for graduate student and analyst utilizing neutron activation analysis. The contents of guide book consists of five parts as follows; introduction, gamma-ray spectrometry and measurement statistics, its applications, to understand of comprehensive methodology and to utilize a relevant knowledge and information on neutron activation analysis.

The effectiveness of worksite physical activity programs on physical activity, physical fitness, and health

NARCIS (Netherlands)

Proper, K.I.; Koning, M.; Beek, A.J. van der; Hildebrandt, V.H.; Bosscher, R.J.; Mechelen, W. van

2003-01-01

Objective: To critically review the literature with respect to the effectiveness of worksite physical activity programs on physical activity, physical fitness, and health. Data Sources: A search for relevant English-written papers published between 1980 and 2000 was conducted using MEDLINE, EMBASE,

Characteristics of physical activity programs in the Brazilian primary health care system

Directory of Open Access Journals (Sweden)

Grace Angélica de Oliveira Gomes

2014-10-01

Full Text Available The aim of this study was to describe the characteristics of programs that promote physical activity in the public primary care system by region of Brazil, subject to the presence or absence of multidisciplinary primary care teams (NASF. We conducted a cross sectional and population-based telephone survey of the health unit coordinators from 1,251 health care units. Coordinators were asked about the presence and characteristics of physical activity programs. Four out of ten health units reported having a physical activity intervention program, the most common involving walking groups. Most of the activities were performed in the morning, once or twice a week, and in sessions of 30 minutes or more. Physical education professionals were primarily responsible for directing the activities. Interventions occurred in the health unit itself or in adjacent community spaces. In general, these characteristics were similar between units with or without NASF, but varied substantially across regions. These findings will guide future physical activity policies and programs within primary care in Brazil.

Phase Retrieval Using a Genetic Algorithm on the Systematic Image-Based Optical Alignment Testbed

Science.gov (United States)

Taylor, Jaime R.

2003-01-01

NASA s Marshall Space Flight Center s Systematic Image-Based Optical Alignment (SIBOA) Testbed was developed to test phase retrieval algorithms and hardware techniques. Individuals working with the facility developed the idea of implementing phase retrieval by breaking the determination of the tip/tilt of each mirror apart from the piston motion (or translation) of each mirror. Presented in this report is an algorithm that determines the optimal phase correction associated only with the piston motion of the mirrors. A description of the Phase Retrieval problem is first presented. The Systematic Image-Based Optical Alignment (SIBOA) Testbeb is then described. A Discrete Fourier Transform (DFT) is necessary to transfer the incoming wavefront (or estimate of phase error) into the spatial frequency domain to compare it with the image. A method for reducing the DFT to seven scalar/matrix multiplications is presented. A genetic algorithm is then used to search for the phase error. The results of this new algorithm on a test problem are presented.

Adherence to a Videogame-Based Physical Activity Program for Older Adults with Schizophrenia.

Science.gov (United States)

Leutwyler, Heather; Hubbard, Erin M; Dowling, Glenna A

2014-08-01

Adults with schizophrenia are a growing segment of the older adult population. Evidence suggests that they engage in limited physical activity. Interventions are needed that are tailored around their unique limitations. An active videogame-based physical activity program that can be offered at a treatment facility can overcome these barriers and increase motivation to engage in physical activity. The purpose of this report is to describe the adherence to a videogame-based physical activity program using the Kinect(®) for Xbox(®) 360 game system (Microsoft(®), Redmond, WA) in older adults with schizophrenia. This was a descriptive longitudinal study among 34 older adults with schizophrenia to establish the adherence to an active videogame-based physical activity program. In our ongoing program, once a week for 6 weeks, participants played an active videogame, using the Kinect for Xbox 360 game system, for 30 minutes. Adherence was measured with a count of sessions attended and with the total minutes attended out of the possible total minutes of attendance (180 minutes). Thirty-four adults with schizophrenia enrolled in the study. The mean number of groups attended was five out of six total (standard deviation=2), and the mean total minutes attended were 139 out of 180 possible (standard deviation=55). Fifty percent had perfect attendance. Older adults with schizophrenia need effective physical activity programs. Adherence to our program suggests that videogames that use the Kinect for Xbox 360 game system are an innovative way to make physical activity accessible to this population.

Adherence to a Videogame-Based Physical Activity Program for Older Adults with Schizophrenia

Science.gov (United States)

Hubbard, Erin M.; Dowling, Glenna A.

2014-01-01

Abstract Objectives: Adults with schizophrenia are a growing segment of the older adult population. Evidence suggests that they engage in limited physical activity. Interventions are needed that are tailored around their unique limitations. An active videogame-based physical activity program that can be offered at a treatment facility can overcome these barriers and increase motivation to engage in physical activity. The purpose of this report is to describe the adherence to a videogame-based physical activity program using the Kinect® for Xbox® 360 game system (Microsoft®, Redmond, WA) in older adults with schizophrenia. Materials and Methods: This was a descriptive longitudinal study among 34 older adults with schizophrenia to establish the adherence to an active videogame-based physical activity program. In our ongoing program, once a week for 6 weeks, participants played an active videogame, using the Kinect for Xbox 360 game system, for 30 minutes. Adherence was measured with a count of sessions attended and with the total minutes attended out of the possible total minutes of attendance (180 minutes). Results: Thirty-four adults with schizophrenia enrolled in the study. The mean number of groups attended was five out of six total (standard deviation=2), and the mean total minutes attended were 139 out of 180 possible (standard deviation=55). Fifty percent had perfect attendance. Conclusions: Older adults with schizophrenia need effective physical activity programs. Adherence to our program suggests that videogames that use the Kinect for Xbox 360 game system are an innovative way to make physical activity accessible to this population. PMID:26192371

Toward Active Living: "Comprehensive School Physical Activity Program" Research and Implications

Science.gov (United States)

Chen, Senlin; Gu, Xiangli

2018-01-01

Comprehensive school physical activity program (CSPAP) holds much promise as a solution for youth PA promotion, due to its strong theoretical and political support. In this article, we review the current research on CSPAP. Fifty-four published articles that met the inclusion criteria were identified and retrieved using direct library database…

A new microcomputer program for processing data in neutron activation analysis

International Nuclear Information System (INIS)

Beeley, P.A.; Page, J.A.; Heimlich, M.S.; Queen's Univ., Kingston, ON; Edward, J.B.; Bennett, L.G.I.

1993-01-01

A new utility program for processing data in neutron activation analysis (NAA) has been developed for use on MS-DOS microcomputers. Peak areas are read from ASCII data files of gamma-ray spectra which have been processed by a Gaussian peak fitting program, GAMANAL-PC. Elemental concentrations are then calculated by this new program, QUACANAL, via a semi-absolute algorithm that uses pre-determined activation constants. User-defined ASCII library files are employed to specify the elements of interest required for analysis, and (n, p) and (n, α) interferences are taken into account. The program has been written in turbo PASCAL, is menu driven and contains options for processing data from cyclic NAA. An interactive philosophy has been used in designing the program. (author) 12 refs.; 2 figs.; 1 tab

Cognitive stimulation in healthy older adults: a cognitive stimulation program using leisure activities compared to a conventional cognitive stimulation program.

Science.gov (United States)

Grimaud, Élisabeth; Taconnat, Laurence; Clarys, David

2017-06-01

The aim of this study was to compare two methods of cognitive stimulation for the cognitive functions. The first method used an usual approach, the second used leisure activities in order to assess their benefits on cognitive functions (speed of processing; working memory capacity and executive functions) and psychoaffective measures (memory span and self esteem). 67 participants over 60 years old took part in the experiment. They were divided into three groups: 1 group followed a program of conventional cognitive stimulation, 1 group a program of cognitive stimulation using leisure activities and 1 control group. The different measures have been evaluated before and after the training program. Results show that the cognitive stimulation program using leisure activities is as effective on memory span, updating and memory self-perception as the program using conventional cognitive stimulation, and more effective on self-esteem than the conventional program. There is no difference between the two stimulated groups and the control group on speed of processing. Neither of the two cognitive stimulation programs provides a benefit over shifting and inhibition. These results indicate that it seems to be possible to enhance working memory and to observe far transfer benefits over self-perception (self-esteem and memory self-perception) when using leisure activities as a tool for cognitive stimulation.

The CELSS Antarctic Analog Project: An Advanced Life Support Testbed at the Amundsen-Scott South Pole Station, Antarctica

Science.gov (United States)

Straight, Christian L.; Bubenheim, David L.; Bates, Maynard E.; Flynn, Michael T.

1994-01-01

CELSS Antarctic Analog Project (CAAP) represents a logical solution to the multiple objectives of both the NASA and the National Science Foundation (NSF). CAAP will result in direct transfer of proven technologies and systems, proven under the most rigorous of conditions, to the NSF and to society at large. This project goes beyond, as it must, the generally accepted scope of CELSS and life support systems including the issues of power generation, human dynamics, community systems, and training. CAAP provides a vivid and starkly realistic testbed of Controlled Ecological Life Support System (CELSS) and life support systems and methods. CAAP will also be critical in the development and validation of performance parameters for future advanced life support systems.

Quality assurance program plan for the radiological survey activities program: Uranium Mill Tailings Remedial Action Project

International Nuclear Information System (INIS)

Ramos, S.J.; Berven, B.A.; Little, C.A.

1986-08-01

The Radiological Survey Activities (RASA) program at Oak Ridge National Laboratory (ORNL) is responsible for surveying designated sites in the vicinity of 24 inactive mill sites involved in the Department of Energy's (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP). The purpose of these surveys is to provide a recommendation to DOE whether to include or exclude the site from UMTRAP based on whether the onsite residual radioactive material (if any) originated from the former mill sites, and radiation levels onsite are in excess of appropriate Environmental Protection Agency (EPA) criteria. This report describes the quality assurance program plan for the RASA program in conducting all activities related to the UMTRA project. All quality assurance provisions given by the DOE, DOE/UMTRA, and ORNL organizations are integrated into this plan. Specifically, this report identifies the policies and procedures followed in accomplishing the RASA/UMTRAP QA program, identifies those organizational units involved in the implementation of these procedures, and outlines the respective responsibilities of those groups

Quality assurance program plan for the Radiological Survey Activities Program - Uranium Mill Tailings Remedial Action Project

International Nuclear Information System (INIS)

Ramos, S.J.; Berven, B.A.; Little, C.A.

1986-01-01

The Radiological Survey Activities (RASA) program at Oak Ridge National Laboratory (ORNL) is responsible for surveying designated sites in the vicinity of 24 inactive mill sites involved in the Department of Energy's (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP). The purpose of these surveys is to provide a recommendation to DOE whether to include or exclude the site from UMTRAP based on whether the onsite residual radioactive material (if any) originated from the former mill sites, and radiation levels onsite are in excess of appropriate Environmental Protection Agency (EPA) criteria. This report describes the quality assurance program plan for the RASA program in conducting all activities related to the UMTRA project. All quality assurance provisions given by the DOE, DOE/UMTRA, and ORNL organizations are integrated into this plan. Specifically, this report identifies the policies and procedures followed in accomplishing the RASA/UMTRAP QA program, identifies those organizational units involved in the implementation of these procedures, and outlines the respective responsibilities of those groups

Competency and an active learning program in undergraduate nursing education.

Science.gov (United States)

Shin, Hyunsook; Sok, Sohyune; Hyun, Kyung Sun; Kim, Mi Ja

2015-03-01

To evaluate the effect of an active learning program on competency of senior students. Active learning strategies have been used to help students achieve desired nursing competency, but their effectiveness has not been systematically examined. A descriptive, cross-sectional comparative design was used. Two cohort group comparisons using t-test were made: one in an active learning group and the other in a traditional learning group. A total of 147 senior nursing students near graduation participated in this study: 73 in 2010 and 74 in 2013. The active learning program incorporated high-fidelity simulation, situation-based case studies, standardized patients, audio-video playback, reflective activities and technology such as a SmartPad-based program. The overall scores of the nursing competency in the active group were significantly higher than those in the traditional group. Of five overall subdomains, the scores of the special and general clinical performance competency, critical thinking and human understanding were significantly higher in the active group than in the traditional group. Importance-performance analysis showed that all five subdomains of the active group clustered in the high importance and high performance quadrant, indicating significantly better achievements. In contrast, the students in the traditional group showed scattered patterns in three quadrants, excluding the low importance and low performance quadrants. This pattern indicates that the traditional learning method did not yield the high performance in most important areas. The findings of this study suggest that an active learning strategy is useful for helping undergraduate students to gain competency. © 2014 John Wiley & Sons Ltd.

The Swift MIDEX Education and Public Outreach Program

Science.gov (United States)

Feigelson, E. D.; Cominsky, L. R.; Whitlock, L. A.

1999-12-01

The Swift satellite is dedicated to an understanding of gamma-ray bursts, the most powerful explosions in the Universe since the Big Bang. A multifaceted E/PO program associated with Swift is planned. Web sites will be constructed, including sophisticated interactive learning environments for combining science concepts with with exploration and critical thinking for high school students. The award-winning instructional television program "What's in the News?", produced by Penn State Public Broadcasting and reaching several million 4th-7th graders, will create a series of broadcasts on Swift and space astronomy. A teachers' curricular guide on space astronomy will be produced by UC-Berkeley's Lawrence Hall of Science as part of their highly successful GEMS guides promoting inquiry-based science education. Teacher workshops will be conducted in the Appalachian region and nationwide to testbed and disseminate these products. We may also assist the production of gamma-ray burst museum exhibits. All aspects of the program will be overseen by a Swift Education Committee and assessed by a professional educational evaluation firm. This effort will be supported by the NASA Swift MIDEX contract to Penn State.

Tracking Activities in Complex Settings Using Smart Environment Technologies.

Science.gov (United States)

Singla, Geetika; Cook, Diane J; Schmitter-Edgecombe, Maureen

2009-01-01

The pervasive sensing technologies found in smart homes offer unprecedented opportunities for providing health monitoring and assistance to individuals experiencing difficulties living independently at home. A primary challenge that needs to be tackled to meet this need is the ability to recognize and track functional activities that people perform in their own homes and everyday settings. In this paper we look at approaches to perform real-time recognition of Activities of Daily Living. We enhance other related research efforts to develop approaches that are effective when activities are interrupted and interleaved. To evaluate the accuracy of our recognition algorithms we assess them using real data collected from participants performing activities in our on-campus smart apartment testbed.

49 CFR 37.61 - Public transportation programs and activities in existing facilities.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Public transportation programs and activities in... TRANSPORTATION SERVICES FOR INDIVIDUALS WITH DISABILITIES (ADA) Transportation Facilities § 37.61 Public transportation programs and activities in existing facilities. (a) A public entity shall operate a designated...

Active sites environmental monitoring program FY 1997 annual report

International Nuclear Information System (INIS)

Morrissey, C.M.; Marshall, D.S.; Cunningham, G.R.

1998-03-01

This report summarizes the activities conducted by the Active Sites Environmental Monitoring Program (ASEMP) from October 1996 through September 1997. The purpose of the program is to provide early detection and performance monitoring at active low-level waste (LLW) disposal sites in Solid Waste Storage Area (SWSA) 6 and transuranic (TRU) waste storage sites in SWSA 5 North. This report continues a series of annual and semiannual reports that present the results of ASEMP monitoring activities. This report details monitoring results for fiscal year (FY) 1997 from SWSA 6, including the Interim Waste Management Facility (IWMF) and the Hillcut Disposal Test Facility (HDTF), and (2) TRU-waste storage areas in SWSA 5 N. This report presents a summary of the methodology used to gather data for each major area along with the FY 1997 results. Figures referenced in the text are found in Appendix A and data tables are presented in Appendix B

Event metadata records as a testbed for scalable data mining

International Nuclear Information System (INIS)

Gemmeren, P van; Malon, D

2010-01-01

At a data rate of 200 hertz, event metadata records ('TAGs,' in ATLAS parlance) provide fertile grounds for development and evaluation of tools for scalable data mining. It is easy, of course, to apply HEP-specific selection or classification rules to event records and to label such an exercise 'data mining,' but our interest is different. Advanced statistical methods and tools such as classification, association rule mining, and cluster analysis are common outside the high energy physics community. These tools can prove useful, not for discovery physics, but for learning about our data, our detector, and our software. A fixed and relatively simple schema makes TAG export to other storage technologies such as HDF5 straightforward. This simplifies the task of exploiting very-large-scale parallel platforms such as Argonne National Laboratory's BlueGene/P, currently the largest supercomputer in the world for open science, in the development of scalable tools for data mining. Using a domain-neutral scientific data format may also enable us to take advantage of existing data mining components from other communities. There is, further, a substantial literature on the topic of one-pass algorithms and stream mining techniques, and such tools may be inserted naturally at various points in the event data processing and distribution chain. This paper describes early experience with event metadata records from ATLAS simulation and commissioning as a testbed for scalable data mining tool development and evaluation.

Active Sites Environmental Monitoring Program. FY 1993: Annual report

International Nuclear Information System (INIS)

Morrissey, C.M.; Ashwood, T.L.; Hicks, D.S.; Marsh, J.D.

1994-08-01

This report continues a series of annual and semiannual reports that present the results of the Active Sites Environmental Monitoring Program (ASEMP) monitoring activities. The report details monitoring data for fiscal year (FY) 1993 and is divided into three major areas: SWSA 6 [including tumulus pads, Interim Waste Management Facility (IWMF), and other sites], the low-level Liquid-Waste Solidification Project (LWSP), and TRU-waste storage facilities in SWSA 5 N. The detailed monitoring methodology is described in the second revision of the ASEMP program plan. This report also presents a summary of the methodology used to gather data for each major area along with the results obtained during FY 1993

A Behaviorally-Oriented Activities Therapy Program for Adolescents.

Science.gov (United States)

Chasanoff, Enid; Schrader, Carl

1979-01-01

A behaviorally-oriented activities therapy program was designed and implemented with adolescents who manifested problems at school, at home, and with peers. Techniques employed included: contingency contracting, assertiveness training, relaxation training, and cognitive restructuring. (Author/KC)

Heavy Ion Fusion Program. Year-end report, October 1978-September 1979

International Nuclear Information System (INIS)

1979-01-01

The more significant activities and results reported for this year are: (1) Commissioning, in January 1979, of a large-area Cs +1 ion source of 1.2 amperes at 500 kV. (2) Commissioning, in July 1979, of the first drift-tube of the three drift-tube accelerator. (3) Acceleration, in January 1979, of a high-brightness, 40 milliampere Xe +1 beam through a Cockcroft-Walton column to 500 kV and confirmation of satisfactory emittance and charge distribution. (4) Development of a conceptual design for a 500 J induction linac test-bed facility to test many of the features needed for the success of an igniter (LBL PUB 5031). (5) Improvements to the systems studies of a Heavy Ion Induction Linac Driver over a wide parameter range with emphasis on cost and efficiency trade-off. (6) Start-up of a (Cs +1 , Cs +1 ) ion-ion cross section measurement program. Initial results of the scattering of Cs +1 ions on Xe gas (electronically similar to Cs +1 ) have shown some surprising results. (7) Expansion of theoretical studies on the behavior of space-charge dominated ion beams

Parental perception on the efficacy of a physical activity program for preschoolers.

Science.gov (United States)

Bellows, Laura; Silvernail, Sara; Caldwell, Lisa; Bryant, Angela; Kennedy, Cathy; Davies, Patricia; Anderson, Jennifer

2011-04-01

Childhood obesity is among the leading health concerns in the United States. The relationship between unmet physical activity needs in young children is of particular interest as the trend in childhood obesity continues to rise and unmet physical activity needs are identified. The preschool years are an influential time in promoting healthful lifestyle habits and early childhood interventions may help establish lifelong healthful behaviors which could help prevent obesity later in life. The Food Friends®: Get Movin' with Mighty Moves® is a preschool physical activity program which aims to improve children's gross motor skills and physical activity levels. The home environment and parental modeling are critical factors related to child physical activity in this population. The parent component, Mighty Moves®: Fun Ways to Keep Families Active and Healthy, was designed to address barriers in the home environment that lead to unmet physical activity needs in preschoolers and their families. The program and materials were designed based on Social Marketing tenets and Social Learning Theory principles. Four Colorado Head Start centers were assigned to an experimental group as part of the Mighty Moves® group randomized trial. Quantitative and qualitative evaluation methods were used to determine what messages and materials reached and motivated the target audience to increase physical activity levels. Results of the study indicated the program's materials helped families and children to be more physically active. Additionally, materials and material dissemination were revised to enhance program goals.

Pre-Activity and Post-Activity Stretching Perceptions and Practices in NCAA Division I Volleyball Programs

Science.gov (United States)

Judge, Lawrence W.; Bodey, Kimberly J.; Bellar, David; Bottone, Adam; Wanless, Elizabeth

2010-01-01

The purpose of this study was to determine if NCAA Division I women's volleyball programs were in compliance with suggested current pre- and post-activity stretching protocols. Questionnaires were sent to NCAA division I women's volleyball programs in the United States. Fifty six coaches (23 males & 33 females) participated in the study. Some…

Earthbound Unmanned Autonomous Vehicles (UAVS) As Planetary Science Testbeds

Science.gov (United States)

Pieri, D. C.; Bland, G.; Diaz, J. A.; Fladeland, M. M.

2014-12-01

Recent advances in the technology of unmanned vehicles have greatly expanded the range of contemplated terrestrial operational environments for their use, including aerial, surface, and submarine. The advances have been most pronounced in the areas of autonomy, miniaturization, durability, standardization, and ease of operation, most notably (especially in the popular press) for airborne vehicles. Of course, for a wide range of planetary venues, autonomy at high cost of both money and risk, has always been a requirement. Most recently, missions to Mars have also featured an unprecedented degree of mobility. Combining the traditional planetary surface deployment operational and science imperatives with emerging, very accessible, and relatively economical small UAV platforms on Earth can provide flexible, rugged, self-directed, test-bed platforms for landed instruments and strategies that will ultimately be directed elsewhere, and, in the process, provide valuable earth science data. While the most direct transfer of technology from terrestrial to planetary venues is perhaps for bodies with atmospheres (and oceans), with appropriate technology and strategy accommodations, single and networked UAVs can be designed to operate on even airless bodies, under a variety of gravities. In this presentation, we present and use results and lessons learned from our recent earth-bound UAV volcano deployments, as well as our future plans for such, to conceptualize a range of planetary and small-body missions. We gratefully acknowledge the assistance of students and colleagues at our home institutions, and the government of Costa Rica, without which our UAV deployments would not have been possible. This work was carried out, in part, at the Jet Propulsion Laboratory of the California Institute of Technology under contract to NASA.

Identifying Strategies Programs Adopt to Meet Healthy Eating and Physical Activity Standards in Afterschool Programs.

Science.gov (United States)

Weaver, Robert G; Moore, Justin B; Turner-McGrievy, Brie; Saunders, Ruth; Beighle, Aaron; Khan, M Mahmud; Chandler, Jessica; Brazendale, Keith; Randell, Allison; Webster, Collin; Beets, Michael W

2017-08-01

The YMCA of USA has adopted Healthy Eating and Physical Activity (HEPA) Standards for its afterschool programs (ASPs). Little is known about strategies YMCA ASPs are implementing to achieve Standards and these strategies' effectiveness. (1) Identify strategies implemented in YMCA ASPs and (2) evaluate the relationship between strategy implementation and meeting Standards. HEPA was measured via accelerometer (moderate-to-vigorous-physical-activity [MVPA]) and direct observation (snacks served) in 20 ASPs. Strategies were identified and mapped onto a capacity building framework ( Strategies To Enhance Practice [STEPs]). Mixed-effects regression estimated increases in HEPA outcomes as implementation increased. Model-implied estimates were calculated for high (i.e., highest implementation score achieved), moderate (median implementation score across programs), and low (lowest implementation score achieved) implementation for both HEPA separately. Programs implemented a variety of strategies identified in STEPs. For every 1-point increase in implementation score 1.45% (95% confidence interval = 0.33% to 2.55%, p ≤ .001) more girls accumulated 30 min/day of MVPA and fruits and/or vegetables were served on 0.11 more days (95% confidence interval = 0.11-0.45, p ≤ .01). Relationships between implementation and other HEPA outcomes did not reach statistical significance. Still regression estimates indicated that desserts are served on 1.94 fewer days (i.e., 0.40 vs. 2.34) in the highest implementing program than the lowest implementing program and water is served 0.73 more days (i.e., 2.37 vs. 1.64). Adopting HEPA Standards at the national level does not lead to changes in routine practice in all programs. Practical strategies that programs could adopt to more fully comply with the HEPA Standards are identified.

Open-Access Physical Activity Programs for Older Adults: A Pragmatic and Systematic Review.

Science.gov (United States)

Balis, Laura E; Strayer, Thomas; Ramalingam, NithyaPriya; Wilson, Meghan; Harden, Samantha M

2018-01-10

Open-access, community-based programs are recommended to assist older adults in meeting physical activity guidelines, but the characteristics, impact, and scalability of these programs is less understood. The Land-Grant University Cooperative Extension System, an organization providing education through county-based educators, functions as a delivery system for these programs. A systematic review was conducted to determine characteristics of effective older adult physical activity programs and the extent to which programs delivered in Extension employ these characteristics. A systematic review of peer-reviewed and grey literature was conducted from August 2016 to February 2017. The review was limited to open-access (available to all), community-based physical activity interventions for older adults (≥65 years of age). The peer-reviewed literature search was conducted in PubMed and EBSCOhost; the grey literature search for Extension interventions was conducted through Extension websites, Land-Grant Impacts, and the Journal of Extension. Sixteen peer-reviewed studies and 17 grey literature sources met inclusion criteria and were analyzed. Peer-reviewed and Extension programs were similar in their limited use of behavioral theories and group-based strategies. Compared to Extension programs, those in the peer-reviewed literature were more likely to use a combination of physical activity components and be delivered by trained professionals. The results indicate notable differences between peer-reviewed literature and Extension programs and present an opportunity for Extension programs to more effectively use evidence-based program characteristics, including behavioral theories and group dynamics, a combination of physical activity components, and educator/agent-trained delivery agents. © The Author(s) 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Wind power integration in island-based smart grid projects : A comparative study between Jeju Smart Grid Test-bed and Smart Grid Gotland

OpenAIRE

Piehl, Hampus

2014-01-01

Smart grids seem to be the solution to use energy from renewable and intermittent energy sources in an efficient manner. There are many research projects around the world and two of them are Jeju Smart Grid Test-bed and Smart Grid Gotland. They have in common that they are both island-based projects and connected to the Powergrid on the mainland by HVDC-link. The purpose of this thesis is to compare the two projects and find out what challenges and strategies they have related to wind power i...

Neighborhood-based physical activity differences: Evaluation of the effect of health promotion program.

Directory of Open Access Journals (Sweden)

Amanda Cristina de Souza Andrade

Full Text Available The practice of physical activity is an important factor in the prevention of health problems. However, a small portion of the population is physically active. Recent reviews show that physical activity classes in community settings have the potential to increase population levels of physical activity and reduce health inequalities.To evaluate the effect of the Academias da Cidade Program in Belo Horizonte on the practice of physical activity in leisure time (PALT by non-users living near the program centers.We conducted a home-based health survey in Belo Horizonte (2008-2009 with 1,581 adults who were non-users of the program and who lived within a 1,500-meter radius of one active program center (exposed group and two nonoperational centers with sites reserved for their construction (unexposed group. We collected data on PALT levels (≥150 minutes/week, which was measured with the Physical Activity International Questionnaire and analyzed with binary logistic regression using the Generalized Estimating Equations method. The propensity score was used as an adjustment variable to control the potential confusion in the measures of effect of exposure studied.The overall prevalence of the PALT was 26.5% in the exposed group and 22.7% in the unexposed group. The exposed group was more likely to be active in leisure time (OR = 1.05; CI 95%: 1.01-1.10. When considering the interaction between exposed group and distance, individuals in the exposed group who lived less than 500 meters from the program center were more likely to be active in leisure time (OR = 1.18, CI 95%: 1.03-1.35 compared to their counterparts.Promoting physical activity in the community can favorably affect PALT levels among residents, especially those living closest to intervention centers. We believe the Academias da Cidade Program is a promising strategy to facilitate the access to appropriate spaces for the practice of physical activity and contribute to increase the levels

GEO light imaging national testbed (GLINT) heliostat design and testing status

Science.gov (United States)

Thornton, Marcia A.; Oldenettel, Jerry R.; Hult, Dane W.; Koski, Katrina; Depue, Tracy; Cuellar, Edward L.; Balfour, Jim; Roof, Morey; Yarger, Fred W.; Newlin, Greg; Ramzel, Lee; Buchanan, Peter; Mariam, Fesseha G.; Scotese, Lee

2002-01-01

The GEO Light Imaging National Testbed (GLINT) will use three laser beams producing simultaneous interference fringes to illuminate satellites in geosynchronous earth orbit (GEO). The reflected returns will be recorded using a large 4,000 m2 'light bucket' receiver. This imaging methodology is termed Fourier Telescopy. A major component of the 'light bucket' will be an array of 40 - 80 heliostats. Each heliostat will have a mirrored surface area of 100 m2 mounted on a rigid truss structure which is supported by an A-frame. The truss structure attaches to the torque tube elevation drive and the A-frame structure rests on an azimuth ring that could provide nearly full coverage of the sky. The heliostat is designed to operate in 15 mph winds with jitter of less than 500 microradians peak-to- peak. One objective of the design was to minimize receiver cost to the maximum extent possible while maintaining GLINT system performance specifications. The mechanical structure weights approximately seven tons and is a simple fabricated steel framework. A prototype heliostat has been assembled at Stallion Range Center, White Sands Missile Range, New Mexico and is being tested under a variety of weather and operational conditions. The preliminary results of that testing will be presented as well as some finite element model analyses that were performed to predict the performance of the structure.

Initial developments in the Stanford SQUIRT program

Science.gov (United States)

Kitts, Christopher A.; Twiggs, Robert J.

1995-01-01

Stanford University's Department of Aeronautics and Astronautics has commenced full scale development of a new microsatellite initiative. Known as the satellite quick research testbed (SQUIRT) program, the project's goal is to produce student engineered satellites capable of servicing state-of-the-art research payloads on a yearly basis. This program is specifically designed to meet the education and research goals of the department's Satellite Systems Development Laboratory. SQUIRT vehicles are envisioned to consist of a 25 pound, 9 inch tall, 16 inch diameter hexagonal structure with complete processor, communications, power, thermal, and attitude subsystems. These spacecraft cater to low power, volume, and mass research experiments and student developed educational packages. Mission lifetimes of up to one year are considered. Through student participation, voluntary mentoring from the academic and industrial communities, and the extensive use of off-the-shelf components, the cash outlay target for SQUIRT class vehicles is $50,000. This paper discusses the educational and research issues surrounding the development of Stanford's spacecraft design curriculum and the formulation of the SQUIRT program. A technical review of the first SQUIRT satellite, named SAPPHIRE, and an outline of the conceptual plans for other missions is also presented. Additionally, initiatives concerning partner academic institutions and public domain design information are featured.

Challenges to Evaluating Physical Activity Programs in American Indian/Alaska Native Communities

Science.gov (United States)

Roberts, Erica Blue; Butler, James; Green, Kerry M.

2018-01-01

Despite the importance of evaluation to successful programming, a lack of physical activity program (PAP) evaluation for American Indian/Alaska Native (AI/AN) programs exists, which is significant given the high rates of obesity and diabetes in this population. While evaluation barriers have been identified broadly among AI/AN programs, challenges…

“I am active”: effects of a program to promote active aging

Directory of Open Access Journals (Sweden)

Mendoza-Ruvalcaba NM

2015-05-01

Full Text Available Neyda Ma Mendoza-Ruvalcaba,1 Elva Dolores Arias-Merino2 1Health Sciences Department, University of Guadalajara, University Center of Tonala Guadalajara, Jalisco, Mexico; 2Public Health Department, University of Guadalajara, University Center of Health Sciences, Guadalajara, Jalisco, Mexico Background: Active aging involves a general lifestyle strategy that allows preservation of both physical and mental health during the aging process. “I am Active” is a program designed to promote active aging by increased physical activity, healthy nutritional habits, and cognitive functioning. The purpose of this study was to assess the effectiveness of this program. Methods: Sixty-four healthy adults aged 60 years or older were recruited from senior centers and randomly allocated to an experimental group (n=31 or a control group (n=33. Baseline, post-test, and 6-month follow-up assessments were performed after the theoretical–practical intervention. Effect sizes were calculated. Results: At the conclusion of the program, the experimental group showed significant improvement compared with the control group in the following domains: physical activity (falls risk, balance, flexibility, self-efficacy, nutrition (self-efficacy and nutritional status, cognitive performance (processing speed and self-efficacy, and quality of life (general, health and functionality, social and economic status. Although some declines were reported, improvements at follow-up remained in self-efficacy for physical activity, self-efficacy for nutrition, and processing speed, and participants had better nutritional status and quality of life overall. Conclusion: Our findings show that this program promotes improvements in domains of active aging, mainly in self-efficacy beliefs as well as in quality of life in healthy elders. Keywords: active aging, successful aging, intervention program, randomized controlled trial

Optimal reliability design for over-actuated systems based on the MIT rule: Application to an octocopter helicopter testbed

International Nuclear Information System (INIS)

Chamseddine, Abbas; Theilliol, Didier; Sadeghzadeh, Iman; Zhang, Youmin; Weber, Philippe

2014-01-01

This paper addresses the problem of optimal reliability in over-actuated systems. Overloading an actuator decreases its overall lifetime and reduces its average performance over a long time. Therefore, performance and reliability are two conflicting requirements. While appropriate reliability is related to average loads, good performance is related to fast response and sufficient loads generated by actuators. Actuator redundancy allows us to address both performance and reliability at the same time by properly allocating desired loads among redundant actuators. The main contribution of this paper is the on-line optimization of the overall plant reliability according to performance objective using an MIT (Massachusetts Institute of Technology) rule-based method. The effectiveness of the proposed method is illustrated through an experimental application to an octocopter helicopter testbed

SU-G-JeP1-07: Development of a Programmable Motion Testbed for the Validation of Ultrasound Tracking Algorithms

Energy Technology Data Exchange (ETDEWEB)

Shepard, A; Matrosic, C; Zagzebski, J; Bednarz, B [University of Wisconsin, Madison, WI (United States)

2016-06-15

Purpose: To develop an advanced testbed that combines a 3D motion stage and ultrasound phantom to optimize and validate 2D and 3D tracking algorithms for real-time motion management during radiation therapy. Methods: A Siemens S2000 Ultrasound scanner utilizing a 9L4 transducer was coupled with the Washington University 4D Phantom to simulate patient motion. The transducer was securely fastened to the 3D stage and positioned to image three cylinders of varying contrast in a Gammex 404GS LE phantom. The transducer was placed within a water bath above the phantom in order to maintain sufficient coupling for the entire range of simulated motion. A programmed motion sequence was used to move the transducer during image acquisition and a cine video was acquired for one minute to allow for long sequence tracking. Images were analyzed using a normalized cross-correlation block matching tracking algorithm and compared to the known motion of the transducer relative to the phantom. Results: The setup produced stable ultrasound motion traces consistent with those programmed into the 3D motion stage. The acquired ultrasound images showed minimal artifacts and an image quality that was more than suitable for tracking algorithm verification. Comparisons of a block matching tracking algorithm with the known motion trace for the three features resulted in an average tracking error of 0.59 mm. Conclusion: The high accuracy and programmability of the 4D phantom allows for the acquisition of ultrasound motion sequences that are highly customizable; allowing for focused analysis of some common pitfalls of tracking algorithms such as partial feature occlusion or feature disappearance, among others. The design can easily be modified to adapt to any probe such that the process can be extended to 3D acquisition. Further development of an anatomy specific phantom better resembling true anatomical landmarks could lead to an even more robust validation. This work is partially funded by NIH

SU-G-JeP1-07: Development of a Programmable Motion Testbed for the Validation of Ultrasound Tracking Algorithms

International Nuclear Information System (INIS)

Shepard, A; Matrosic, C; Zagzebski, J; Bednarz, B

2016-01-01

Purpose: To develop an advanced testbed that combines a 3D motion stage and ultrasound phantom to optimize and validate 2D and 3D tracking algorithms for real-time motion management during radiation therapy. Methods: A Siemens S2000 Ultrasound scanner utilizing a 9L4 transducer was coupled with the Washington University 4D Phantom to simulate patient motion. The transducer was securely fastened to the 3D stage and positioned to image three cylinders of varying contrast in a Gammex 404GS LE phantom. The transducer was placed within a water bath above the phantom in order to maintain sufficient coupling for the entire range of simulated motion. A programmed motion sequence was used to move the transducer during image acquisition and a cine video was acquired for one minute to allow for long sequence tracking. Images were analyzed using a normalized cross-correlation block matching tracking algorithm and compared to the known motion of the transducer relative to the phantom. Results: The setup produced stable ultrasound motion traces consistent with those programmed into the 3D motion stage. The acquired ultrasound images showed minimal artifacts and an image quality that was more than suitable for tracking algorithm verification. Comparisons of a block matching tracking algorithm with the known motion trace for the three features resulted in an average tracking error of 0.59 mm. Conclusion: The high accuracy and programmability of the 4D phantom allows for the acquisition of ultrasound motion sequences that are highly customizable; allowing for focused analysis of some common pitfalls of tracking algorithms such as partial feature occlusion or feature disappearance, among others. The design can easily be modified to adapt to any probe such that the process can be extended to 3D acquisition. Further development of an anatomy specific phantom better resembling true anatomical landmarks could lead to an even more robust validation. This work is partially funded by NIH

Effects of programmed physical activity on body composition in post-pubertal schoolchildren.

Science.gov (United States)

Farias, Edson Dos Santos; Gonçalves, Ezequiel Moreira; Morcillo, André Moreno; Guerra-Júnior, Gil; Amancio, Olga Maria Silverio

2015-01-01

To assess body composition modifications in post-pubertal schoolchildren after practice of a physical activity program during one school year. The sample consisted of 386 students aged between 15 and 17 years and divided into two groups: the study group (SG) comprised 195 students and the control group (CG), 191. The SG was submitted to a physical activity program and the CG attended conventional physical education classes. Body composition was assessed using body mass index (BMI), percentage of body fat (%BF), fat mass (FM), and lean mass (LM). A positive effect of the physical activity program on body composition in the SG (pgenders. A reduction in %BF (mean of differences = -5.58%) and waist circumference (-2.33 cm), as well as an increase in LM (+2.05 kg) were observed in the SG for both genders, whereas the opposite was observed in the CG. The practice of programmed physical activity promotes significant reduction of body fat in post-pubertal schoolchildren. Copyright © 2013 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

Improving Flight Software Module Validation Efforts : a Modular, Extendable Testbed Software Framework

Science.gov (United States)

Lange, R. Connor

2012-01-01

Ever since Explorer-1, the United States' first Earth satellite, was developed and launched in 1958, JPL has developed many more spacecraft, including landers and orbiters. While these spacecraft vary greatly in their missions, capabilities,and destination, they all have something in common. All of the components of these spacecraft had to be comprehensively tested. While thorough testing is important to mitigate risk, it is also a very expensive and time consuming process. Thankfully,since virtually all of the software testing procedures for SMAP are computer controlled, these procedures can be automated. Most people testing SMAP flight software (FSW) would only need to write tests that exercise specific requirements and then check the filtered results to verify everything occurred as planned. This gives developers the ability to automatically launch tests on the testbed, distill the resulting logs into only the important information, generate validation documentation, and then deliver the documentation to management. With many of the steps in FSW testing automated, developers can use their limited time more effectively and can validate SMAP FSW modules quicker and test them more rigorously. As a result of the various benefits of automating much of the testing process, management is considering this automated tools use in future FSW validation efforts.

Circumpolar Active Layer Monitoring (CALM) Program Network, Version 1

Data.gov (United States)

National Aeronautics and Space Administration — The CALM network includes 168 active sites in both hemispheres with 15 participating countries. This network represents the only coordinated and standardized program...

Influence of a 12-year supervised physical activity program for the elderly

Directory of Open Access Journals (Sweden)

José Rodrigo Pauli

2009-06-01

Full Text Available Aging is an inevitable process and is associated with declining physiological and functional capacity in humans. The objective of this study was to determine the effects of a 12-yearsupervised physical training program on functional fitness in the elderly. Ten women (mean age: 65 years participated in the study. The subjects were divided into two groups: a a trained group consisting of women who had been attending a supervised program including different types of physical activities of moderate intensity over the last 12 years; b an untrained group consisting of women who were not engaged in any supervised physical activity program over the last 12years. Functional fitness was assessed using the AAHPERD field-test battery which comprises five single motor tests: coordination, flexibility, strength endurance, agility and dynamic balance, and overall aerobic endurance. The results showed a better performance of elderly women whoparticipated in a physical activity program over the last 12 years. Thus, whereas elderly women who perform regular physical activities in a supervised program tend to show improvement of all functional fitness components even after a period of 12 years, a tendency towards a reduction in most of these components is observed in their non-active peers. These findings seem to predict an increasing gap in functional fitness between these two groups as they grow older, with opposite effects on the quality of life of these subjects.

“I am active”: effects of a program to promote active aging

Science.gov (United States)

Mendoza-Ruvalcaba, Neyda Ma; Arias-Merino, Elva Dolores

2015-01-01

Background Active aging involves a general lifestyle strategy that allows preservation of both physical and mental health during the aging process. “I am Active” is a program designed to promote active aging by increased physical activity, healthy nutritional habits, and cognitive functioning. The purpose of this study was to assess the effectiveness of this program. Methods Sixty-four healthy adults aged 60 years or older were recruited from senior centers and randomly allocated to an experimental group (n=31) or a control group (n=33). Baseline, post-test, and 6-month follow-up assessments were performed after the theoretical–practical intervention. Effect sizes were calculated. Results At the conclusion of the program, the experimental group showed significant improvement compared with the control group in the following domains: physical activity (falls risk, balance, flexibility, self-efficacy), nutrition (self-efficacy and nutritional status), cognitive performance (processing speed and self-efficacy), and quality of life (general, health and functionality, social and economic status). Although some declines were reported, improvements at follow-up remained in self-efficacy for physical activity, self-efficacy for nutrition, and processing speed, and participants had better nutritional status and quality of life overall. Conclusion Our findings show that this program promotes improvements in domains of active aging, mainly in self-efficacy beliefs as well as in quality of life in healthy elders. PMID:26005337

Program to improve the effectiveness of education and professional activities of college students

Directory of Open Access Journals (Sweden)

I.V. Vlaskina

2013-04-01

Full Text Available We describe a training program on “Psychology of effective professional activity”, realized on the basis of the Ural College of the Beauty Industry. The purpose of this discipline is to improve the effectiveness of education and professional activities of college students acquiring professions of “Human-Human” type. To improve effectiveness of education and professional activities, this program provides formation of professionally important qualities of students. The results of the program can be: students’ acquisition of knowledge required for the effective performance of professional activities (ways to prevent burnout, increase self-confidence, etc.; mastery of professional skills (planning, simulation, etc.; formation of professionally important qualities (stress, tolerance, etc.; increasing the efficiency of their professional activities.

Quality of life in institutionalized elderly undergoing an active aging program

OpenAIRE

Magalhães, Carlos Pires; Rebelo, Flávia Marisa Ramalho; Anes, Eugénia

2016-01-01

Living with quality is a growing concern of the old population. There is an increasing institutionalization of the elderly, and it is in this context that active aging programs assume relevance, allowing the elderly the contact with experiences that allow them to age with quality of life, by maintaining their autonomy and promoting their physical, mental and emotional well-being. This study aims to assess the quality of life of institutionalized elderly undergoing to an active aging program. ...

Effects of a pediatric weight management program with and without active video games a randomized trial.

Science.gov (United States)

Trost, Stewart G; Sundal, Deborah; Foster, Gary D; Lent, Michelle R; Vojta, Deneen

2014-05-01

Active video games may offer an effective strategy to increase physical activity in overweight and obese children. However, the specific effects of active gaming when delivered within the context of a pediatric weight management program are unknown. To evaluate the effects of active video gaming on physical activity and weight loss in children participating in an evidence-based weight management program delivered in the community. Group-randomized clinical trial conducted during a 16-week period in YMCAs and schools located in Massachusetts, Rhode Island, and Texas. Seventy-five overweight or obese children (41 girls [55%], 34 whites [45%], 20 Hispanics [27%], and 17 blacks [23%]) enrolled in a community-based pediatric weight management program. Mean (SD) age of the participants was 10.0 (1.7) years; body mass index (BMI) z score, 2.15 (0.40); and percentage overweight from the median BMI for age and sex, 64.3% (19.9%). All participants received a comprehensive family-based pediatric weight management program (JOIN for ME). Participants in the program and active gaming group received hardware consisting of a game console and motion capture device and 1 active game at their second treatment session and a second game in week 9 of the program. Participants in the program-only group were given the hardware and 2 games at the completion of the 16-week program. Objectively measured daily moderate-to-vigorous and vigorous physical activity, percentage overweight, and BMI z score. Participants in the program and active gaming group exhibited significant increases in moderate-to-vigorous (mean [SD], 7.4 [2.7] min/d) and vigorous (2.8 [0.9] min/d) physical activity at week 16 (P video gaming into an evidence-based pediatric weight management program has positive effects on physical activity and relative weight. TRIAL REGISTRATION clinicaltrials.gov Identifier: NCT01757925.

A test-bed modeling study for wave resource assessment

Science.gov (United States)

Yang, Z.; Neary, V. S.; Wang, T.; Gunawan, B.; Dallman, A.

2016-02-01

Hindcasts from phase-averaged wave models are commonly used to estimate standard statistics used in wave energy resource assessments. However, the research community and wave energy converter industry is lacking a well-documented and consistent modeling approach for conducting these resource assessments at different phases of WEC project development, and at different spatial scales, e.g., from small-scale pilot study to large-scale commercial deployment. Therefore, it is necessary to evaluate current wave model codes, as well as limitations and knowledge gaps for predicting sea states, in order to establish best wave modeling practices, and to identify future research needs to improve wave prediction for resource assessment. This paper presents the first phase of an on-going modeling study to address these concerns. The modeling study is being conducted at a test-bed site off the Central Oregon Coast using two of the most widely-used third-generation wave models - WaveWatchIII and SWAN. A nested-grid modeling approach, with domain dimension ranging from global to regional scales, was used to provide wave spectral boundary condition to a local scale model domain, which has a spatial dimension around 60km by 60km and a grid resolution of 250m - 300m. Model results simulated by WaveWatchIII and SWAN in a structured-grid framework are compared to NOAA wave buoy data for the six wave parameters, including omnidirectional wave power, significant wave height, energy period, spectral width, direction of maximum directionally resolved wave power, and directionality coefficient. Model performance and computational efficiency are evaluated, and the best practices for wave resource assessments are discussed, based on a set of standard error statistics and model run times.

40 CFR 5.400 - Education programs or activities.

Science.gov (United States)

2010-07-01

... affecting any applicant, student, or employee of such recipient that these Title IX regulations would... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Education programs or activities. 5.400 Section 5.400 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GENERAL NONDISCRIMINATION ON THE...

1988 Monitoring Activities Review (MAR) of the environmental monitoring program

International Nuclear Information System (INIS)

1989-03-01

The EGandG Idaho Environmental Monitoring (EM) Unit is responsible for coordinating and conducting environmental measurements of radioactive and hazardous contaminants around facilities operated by EGandG Idaho. The EM Unit has several broad program objectives, which include complying with regulatory standards and developing a basis for estimating future impacts of operations at EGandG Idaho facilities. To improve program planning and to provide bases for technical improvement of the monitoring program, the EGandG Environmental Monitoring organization has regularly used the Monitoring Activities Review (MAR) process since 1982. Each MAR is conducted by a committee of individuals selected for their experience in the various types of monitoring performed by the EM organization. Previous MAR studies have focused on procedures for all currently monitored media except biota. Biotic monitoring was initiated following the last MAR. This report focuses on all currently monitored media, and includes the first review of biotic monitoring. The review of biotic monitoring has been conducted at a level of detail consistent with initial MAR reports for other parts of the Waste Management Program Facilities Environmental Monitoring Program. The review of the biotic monitoring activities is presented in Section 5.5 of this report. 21 refs., 7 figs., 4 tabs

Bridging the Gap from Networking Technologies to Applications: Workshop Report

Science.gov (United States)

Johnson, Marjory J.; desJardins, Richard

2000-01-01

application and technological challenges that remain. Next we present the technology roadmaps that were created at the workshop, summarizing the status of various mechanisms that are currently under development and forecasting when various advances are likely to occur within the next one-to-three-year time span. Then we identify issues that were raised at the workshop that might hinder technology development or that might impede integration into NGI applications. We also report some specific guidelines that were offered at the workshop to enable application developers to integrate and effectively use emerging NGI technology building blocks. Finally, we describe NREN activities to incorporate emerging technologies into NASA applications. These activities include support for other NASA High-Performance Computing and Communications Program areas such as IPG (Information Power Grid), support for NASA science enterprises such as Earth science and Mars program prototyping activities, support for satellite/terrestrial networking applications such as the TransAtlantic and TransPacific demonstrations and the Interplanetary Internet, support for NASA telemedicine applications such as the Virtual Collaborative Clinic, and participation in NGI advanced technology testbed initiatives such as the QBone and the NTON/Supernet. For each activity we highlight the primary technological challenge that is associated with it.

Effects of programmed physical activity on body composition in post-pubertal schoolchildren

Directory of Open Access Journals (Sweden)

Edson dos Santos Farias

2015-04-01

Full Text Available OBJECTIVE: To assess body composition modifications in post-pubertal schoolchildren after practice of a physical activity program during one school year. METHODS: The sample consisted of 386 students aged between 15 and 17 years and divided into two groups: the study group (SG comprised 195 students and the control group (CG, 191. The SG was submitted to a physical activity program and the CG attended conventional physical education classes. Body composition was assessed using body mass index (BMI, percentage of body fat (%BF, fat mass (FM, and lean mass (LM. RESULTS: A positive effect of the physical activity program on body composition in the SG (p < 0.001 was observed, as well as on the interaction time x group in all the variables analyzed in both genders. A reduction in %BF (mean of differences = -5.58% and waist circumference (-2.33 cm, as well as an increase in LM (+2.05 kg were observed in the SG for both genders, whereas the opposite was observed in the CG. CONCLUSION: The practice of programmed physical activity promotes significant reduction of body fat in post-pubertal schoolchildren.

Human Exploration System Test-Bed for Integration and Advancement (HESTIA) Support of Future NASA Deep-Space Missions

Science.gov (United States)

Marmolejo, Jose; Ewert, Michael

2016-01-01

The Engineering Directorate at the NASA - Johnson Space Center is outfitting a 20-Foot diameter hypobaric chamber in Building 7 to support future deep-space Environmental Control & Life Support System (ECLSS) research as part of the Human Exploration System Test-bed for Integration and Advancement (HESTIA) Project. This human-rated chamber is the only NASA facility that has the unique experience, chamber geometry, infrastructure, and support systems capable of conducting this research. The chamber was used to support Gemini, Apollo, and SkyLab Missions. More recently, it was used to conduct 30-, 60-, and 90-day human ECLSS closed-loop testing in the 1990s to support the International Space Station and life support technology development. NASA studies show that both planetary surface and deep-space transit crew habitats will be 3-4 story cylindrical structures driven by human occupancy volumetric needs and launch vehicle constraints. The HESTIA facility offers a 3-story, 20-foot diameter habitat consistent with the studies' recommendations. HESTIA operations follow stringent processes by a certified test team that including human testing. Project management, analysis, design, acquisition, fabrication, assembly and certification of facility build-ups are available to support this research. HESTIA offers close proximity to key stakeholders including astronauts, Human Research Program (who direct space human research for the agency), Mission Operations, Safety & Mission Assurance, and Engineering Directorate. The HESTIA chamber can operate at reduced pressure and elevated oxygen environments including those proposed for deep-space exploration. Data acquisition, power, fluids and other facility resources are available to support a wide range of research. Recently completed HESTIA research consisted of unmanned testing of ECLSS technologies. Eventually, the HESTIA research will include humans for extended durations at reduced pressure and elevated oxygen to demonstrate

Magnetic Fusion Energy Technology Fellowship Program: Summary of program activities for calendar year 1985

International Nuclear Information System (INIS)

1985-01-01

This report summarizes the activities of the US Department of Energy (DOE) Magnetic Fusion Energy Technology Fellowship program (MFETF) for the 1985 calendar year. The MFETF program has continued to support the mission of the Office of Fusion Energy (OFE) and its Division of Development and Technology (DDT) by ensuring the availability of appropriately trained engineering manpower needed to implement the OFE/DDT magnetic fusion energy agenda. This program provides training and research opportunities to highly qualified students at DOE-designated academic, private sector, and government magnetic fusion energy institutions. The objectives of the Magnetic Fusion Energy Technology Fellowship program are: (1) to provide support for graduate study, training, and research in magnetic fusion energy technology; (2) to ensure an adequate supply of appropriately trained manpower to implement the nation's magnetic fusion energy agenda; (3) to raise the visibility of careers in magnetic fusion energy technology and to encourage students to pursue such careers; and (4) to make national magnetic fusion energy facilities available for manpower training

Animal-Assisted Activity: Effects of a Complementary Intervention Program on Psychological and Physiological Variables.

Science.gov (United States)

Nepps, Peggy; Stewart, Charles N; Bruckno, Stephen R

2014-07-01

Animal-assisted activity is the use of trained animals for the therapeutic, motivational, or educational benefit of patients. Subjects of this study were 218 patients hospitalized on the mental health unit of a community hospital with an existing, complementary animal-assisted activity program. Half of the patients participated in a 1-hour session of animal-assisted activity. The other half, who served as a comparison group, participated in a 1-hour stress management program. It was hypothesized that an animal-assisted activity program would improve ratings of depression, anxiety, and pain and the associated physiological measures of stress and discomfort. Self-report ratings of depression, anxiety, and pain were collected before and after treatment sessions, and blood pressure, pulse, and salivary cortisol were measured. There were significant decreases in depression (P animal-assisted activity program, comparable to those in the more traditional stress management group. © The Author(s) 2014.

Evaluation of Outcomes Associated with a Leisure-time Activity Program for Disadvantaged Youth

Directory of Open Access Journals (Sweden)

Juanita Bester

2016-01-01

Full Text Available The SLEAK (Skills, Learning and Educational Activities for Kids program was established in 2008 as a joint partnership between a community leader and the Division of Occupational Therapy Stellenbosch University. The vision of the SLEAK program is to create a sustainable, non-profit, leisure-time activity program for the youth (10-13 years of age of the community in order to curb drug and gangster-related activities and to foster healthy work-related skills in the youth to make them responsible and productive members of their community. The SLEAK program was evaluated in its entirety and this article will focus on the results for the outcomes set for the children in the SLEAK program. The results indicated that although it is still a rather small project, it seems as if the project is effective in what it set out to achieve and that it could serve as a pilot for starting projects in similar communities.

Future space-based direct imaging platforms: high fidelity simulations and instrument testbed development

Science.gov (United States)

Hicks, Brian A.; Eberhardt, Andrew; SAINT, VNC, LUVOIR

2017-06-01

The direct detection and characterization of habitable zone (HZ) Earth-like exoplanets is predicated on light gathering power of a large telescope operating with tens of millicarcsecond angular resolution, and at contrast scales on the order of 0.1 ppb. Accessing a statistically significant sample of planets to search for habitable worlds will likely build on the knowledge and insfrastructure gained through JWST, later advancing to assembly in space or formation flying approaches that may eventually be used to achieve even greater photometric sensitivity or resolution. in order to address contrast, a means of starlight suppression is needed that contends with complex aperture diffraction. The Visible Nulling Coronagraph (VNC) is one such approach that destructively interferes starlight to enable detection and characterization of extrasolar objects.The VNC is being incorporated into an end-to-end telescope-coronagraph system demonstrator called the Segmented Aperture Interferometric Nulling Testbed (SAINT). Development of the VNC has a rich legacy, and successfully demonstrating its capability with SAINT will mark milestones towards meeting the high-contrast direct imaging needs of future large space telescopes. SAINT merges the VNC with an actively-controlled segmented aperture telescope via a fine pointing system and aims to demonstrate 1e-8 contrast nulling of a segmented aperture at an inner working angle of four diffraction radii over a 20 nm visible bandpass. The system comprises four detectors for wavefront sensing, one of which is the high-contrast focal plane. The detectors provide feedback to control the segmented telescope primary mirror, a fast steering mirror, a segmented deformable mirror, and a delay stage. All of these components must work in concert with passive optical elements that are designed, fabricated, and aligned pairwise to achieve the requisite wavefront symmetry needed to push the state of the art in broadband destructive interferometric

Extracurricular Physical Activity Programs in California Private Secondary Schools.

Science.gov (United States)

Kahan, David; McKenzie, Thomas L

2017-12-01

Interscholastic, intramural, and club physical activity (PA) programs can be important contributors to student PA accrual at schools. Few studies have assessed factors related to the provision of these extracurricular PA programs, especially in private schools. We used a 16-item questionnaire to assess the associations and influences of selected factors relative to extracurricular PA program policies and practices in 450 private California secondary schools. Associations were evaluated using contingency table analyses (i.e., chi-squared, effect size, and post-hoc analyses). Six factors were associated with schools providing extracurricular PA programs: school location, level, enrollment, and religious classification and whether the physical education (PE) program met state PE time standards and was taught by PE specialists. Both static factors (e.g., school location, level, enrollment, and religious affiliation) and modifiable factors (e.g., meeting PE standards and employing specialists) affect the provision of extracurricular PA programs. As education is state-mandated, additional study is recommended to assess the generalizability of these findings to other states and to public schools.

The Agita São Paulo Program as a model for using physical activity to promote health

Directory of Open Access Journals (Sweden)

Sandra Mahecha Matsudo

2003-10-01

Full Text Available The "Agita São Paulo" Program applies a multilevel intervention approach to promoting physical activity among the 37 million inhabitants of the state of São Paulo, Brazil. The verb "agita" means to move the body, but the term also suggests changing the way of thinking and becoming a more active citizen. Since being launched in 1996, the Program has been widely copied throughout Brazil and in other countries of Latin America, and the World Health Organization has characterized it as a model for other developing countries. The Program aims to disseminate a clear and simple message to the community as well as establish partnerships with governmental and nongovernmental organizations and other entities. The Agita São Paulo message encourages people to adopt an active lifestyle by accumulating at least 30 minutes of moderate physical activity per day, on most days of the week. The Program has three main target groups: students, workers, and the elderly. The Program organizes "mega-events" that simultaneously reach and involve large numbers of people, and it also conducts ongoing activities with institutions that become partners of the Program. Intervention studies that the Program has carried out on specific, small groups have found both changes in behavior and an increasing awareness of the Program's name and message. In addition, surveys have found that a growing number of persons in the state of São Paulo have become aware of the Program and its message and have changed their physical activity level. A number of the special features of and lessons learned from the Agita São Paulo Program may have contributed to its success, including: a multisectorial approach; broad use of partnerships; the inclusion principle (avoiding messages or attitudes that might exclude any social group; the scientific basis for all the Program activities; the extensive free media coverage that the Program has received; a "two-hats" approach, using either governmental

The Agita São Paulo Program as a model for using physical activity to promote health

Directory of Open Access Journals (Sweden)

Matsudo Sandra Mahecha

2003-01-01

Full Text Available The "Agita São Paulo" Program applies a multilevel intervention approach to promoting physical activity among the 37 million inhabitants of the state of São Paulo, Brazil. The verb "agita" means to move the body, but the term also suggests changing the way of thinking and becoming a more active citizen. Since being launched in 1996, the Program has been widely copied throughout Brazil and in other countries of Latin America, and the World Health Organization has characterized it as a model for other developing countries. The Program aims to disseminate a clear and simple message to the community as well as establish partnerships with governmental and nongovernmental organizations and other entities. The Agita São Paulo message encourages people to adopt an active lifestyle by accumulating at least 30 minutes of moderate physical activity per day, on most days of the week. The Program has three main target groups: students, workers, and the elderly. The Program organizes "mega-events" that simultaneously reach and involve large numbers of people, and it also conducts ongoing activities with institutions that become partners of the Program. Intervention studies that the Program has carried out on specific, small groups have found both changes in behavior and an increasing awareness of the Program's name and message. In addition, surveys have found that a growing number of persons in the state of São Paulo have become aware of the Program and its message and have changed their physical activity level. A number of the special features of and lessons learned from the Agita São Paulo Program may have contributed to its success, including: a multisectorial approach; broad use of partnerships; the inclusion principle (avoiding messages or attitudes that might exclude any social group; the scientific basis for all the Program activities; the extensive free media coverage that the Program has received; a "two-hats" approach, using either governmental

Impact of a workplace physical activity tracking program on biometric health outcomes.

Science.gov (United States)

Yu, Jiani; Abraham, Jean M; Dowd, Bryan; Higuera, Lucas F; Nyman, John A

2017-12-01

Wellness programs are a popular strategy utilized by large U.S. employers. As mobile health applications and wearable tracking devices increase in prevalence, many employers now offer physical activity tracking applications. This longitudinal study evaluates the impact of engagement with a web-based, physical activity tracking program on changes in individuals' biometric outcomes in an employer population. The study population includes active employees and adult dependents continuously enrolled in an eligible health plan and who have completed at least two biometric screenings (n=36,882 person-years with 11,436 unique persons) between 2011 and 2014. Using difference-in-differences (DID) regression, we estimate the effect of participation in the physical activity tracking application on BMI, total cholesterol, and blood pressure. Participation was significantly associated with a reduction of 0.275 in BMI in the post-period, relative to the comparison group, representing a 1% change from baseline BMI. The program did not have a statistically significant impact on cholesterol or blood pressure. Sensitivity checks revealed slightly larger BMI reductions among participants with higher intensity of tracking activity and in the period following the employer's shift to an outcomes-based incentive design. Results are broadly consistent with the existing literature on changes in biometric outcomes from workplace initiatives promoting increased physical activity. Employers should have modest expectations about the potential health benefits of such programs, given current designs and implementation in real-world settings. Copyright © 2017 Elsevier Inc. All rights reserved.

Status of the Visible Nulling Coronagraph Technology Demonstration Program

Science.gov (United States)

Clampin, M.; Lyon, R.

2012-01-01

We report on the development, sensing and control of the Vacuum Nuller Testbed to realize a Visible Nulling Coronagraphy (VNC) for exoplanet detection and characterization. The VNC is one of the few approaches that works with filled, segmented and sparse or diluted-aperture telescope systems. It thus spans a range of potential future NASA telescopes and could be flown as a separate instrument on such a future mission. NASA/Goddard Space Flight Center has an established effort to develop VNC technologies, and an incremental sequence of testbeds to advance this approach and its critical technologies. We will highlight results demonstrating the achievement of our TDEM contrast milestones, and highlight the performance of our wavefront sensing and control concept.

Active Early: one-year policy intervention to increase physical activity among early care and education programs in Wisconsin

Directory of Open Access Journals (Sweden)

Tara L. LaRowe

2016-07-01

Full Text Available Abstract Background Early childcare and education (ECE is a prime setting for obesity prevention and the establishment of healthy behaviors. The objective of this quasi-experimental study was to examine the efficacy of the Active Early guide, which includes evidenced-based approaches, provider resources, and training, to improve physical activity opportunities through structured (i.e. teacher-led activity and environmental changes thereby increasing physical activity among children, ages 2–5 years, in the ECE setting. Methods Twenty ECE programs in Wisconsin, 7 family and 13 group, were included. An 80-page guide, Active Early, was developed by experts and statewide partners in the fields of ECE, public health, and physical activity and was revised by ECE providers prior to implementation. Over 12 months, ECE programs received on-site training and technical assistance to implement the strategies and resources provided in the Active Early guide. Main outcome measures included observed minutes of teacher-led physical activity, physical activity environment measured by the Environment and Policy Assessment and Observation (EPAO instrument, and child physical activity levels via accelerometry. All measures were collected at baseline, 6 months, and 12 months and were analyzed for changes over time. Results Observed teacher-led physical activity significantly increased from 30.9 ± 22.7 min at baseline to 82.3 ± 41.3 min at 12 months. The change in percent time children spent in sedentary activity decreased significantly after 12 months (−4.4 ± 14.2 % time, −29.2 ± 2.6 min, p < 0.02. Additionally, as teacher led-activity increased, percent time children were sedentary decreased (r = −0.37, p < 0.05 and percent time spent in light physical activity increased (r = 0.35, p < 0.05. Among all ECE programs, the physical activity environment improved significantly as indicated by multiple sub-scales of

The Threat Effect of Active Labor Market Programs: A Systematic Review

DEFF Research Database (Denmark)

Filges, Trine; Hansen, Anne Toft

2017-01-01

This paper is a systematic review of the threat effect of active labor market programs for unemployed individuals. The threat effect is the induced change in the hazard rate of leaving unemployment prior to program participation. Studies included in the review all estimated a threat effect...... a hazard rate of 1.27 for the pooled estimate. It has thus been concluded that active labor market programs constitute a significant threat effect......., with the participants in all cases being unemployed individuals in receipt of benefit of some kind during their tenure of unemployment. Seven of these studies have been included in a meta-analysis: The meta-analysis, which has been carried out using a random effects model to account for heterogeneity, indicated...

Design and development of cell queuing, processing, and scheduling modules for the iPOINT input-buffered ATM testbed

Science.gov (United States)

Duan, Haoran

1997-12-01

This dissertation presents the concepts, principles, performance, and implementation of input queuing and cell-scheduling modules for the Illinois Pulsar-based Optical INTerconnect (iPOINT) input-buffered Asynchronous Transfer Mode (ATM) testbed. Input queuing (IQ) ATM switches are well suited to meet the requirements of current and future ultra-broadband ATM networks. The IQ structure imposes minimum memory bandwidth requirements for cell buffering, tolerates bursty traffic, and utilizes memory efficiently for multicast traffic. The lack of efficient cell queuing and scheduling solutions has been a major barrier to build high-performance, scalable IQ-based ATM switches. This dissertation proposes a new Three-Dimensional Queue (3DQ) and a novel Matrix Unit Cell Scheduler (MUCS) to remove this barrier. 3DQ uses a linked-list architecture based on Synchronous Random Access Memory (SRAM) to combine the individual advantages of per-virtual-circuit (per-VC) queuing, priority queuing, and N-destination queuing. It avoids Head of Line (HOL) blocking and provides per-VC Quality of Service (QoS) enforcement mechanisms. Computer simulation results verify the QoS capabilities of 3DQ. For multicast traffic, 3DQ provides efficient usage of cell buffering memory by storing multicast cells only once. Further, the multicast mechanism of 3DQ prevents a congested destination port from blocking other less- loaded ports. The 3DQ principle has been prototyped in the Illinois Input Queue (iiQueue) module. Using Field Programmable Gate Array (FPGA) devices, SRAM modules, and integrated on a Printed Circuit Board (PCB), iiQueue can process incoming traffic at 800 Mb/s. Using faster circuit technology, the same design is expected to operate at the OC-48 rate (2.5 Gb/s). MUCS resolves the output contention by evaluating the weight index of each candidate and selecting the heaviest. It achieves near-optimal scheduling and has a very short response time. The algorithm originates from a

Can Programmed or Self-Selected Physical Activity Affect Physical Fitness of Adolescents?

Directory of Open Access Journals (Sweden)

Neto Cláudio F.

2014-12-01

Full Text Available The aim of this study was to verify the effects of programmed and self-selected physical activities on the physical fitness of adolescents. High school adolescents, aged between 15 and 17 years, were divided into two experimental groups: a a self-selected physical activity group (PAS with 55 students (aged 15.7 ± 0.7 years, who performed physical activities with self-selected rhythm at the following sports: basketball, volleyball, handball, futsal and swimming; and b a physical fitness training group (PFT with 53 students (aged 16.0 ± 0.7 years, who performed programmed physical fitness exercises. Both types of activity were developed during 60 min classes. To assess physical fitness the PROESP-BR protocol was used. The statistical analysis was performed by repeated measures ANOVA. The measurements of pre and post-tests showed significantly different values after PFT in: 9 minute running test, medicine ball throw, horizontal jump, abdominal endurance, running speed and flexibility. After PAS differences were detected in abdominal endurance, agility, running speed and flexibility. The intervention with programmed physical activity promoted more changes in the physical abilities; however, in the self-selected program, agility was improved probably because of the practice of sports. Therefore, physical education teachers can use PFT to improve cardiorespiratory fitness and power of lower and upper limbs and PAS to improve agility of high school adolescents.

Can programmed or self-selected physical activity affect physical fitness of adolescents?

Science.gov (United States)

Neto, Cláudio F; Neto, Gabriel R; Araújo, Adenilson T; Sousa, Maria S C; Sousa, Juliana B C; Batista, Gilmário R; Reis, Victor M M R

2014-09-29

The aim of this study was to verify the effects of programmed and self-selected physical activities on the physical fitness of adolescents. High school adolescents, aged between 15 and 17 years, were divided into two experimental groups: a) a self-selected physical activity group (PAS) with 55 students (aged 15.7 ± 0.7 years), who performed physical activities with self-selected rhythm at the following sports: basketball, volleyball, handball, futsal and swimming; and b) a physical fitness training group (PFT) with 53 students (aged 16.0 ± 0.7 years), who performed programmed physical fitness exercises. Both types of activity were developed during 60 min classes. To assess physical fitness the PROESP-BR protocol was used. The statistical analysis was performed by repeated measures ANOVA. The measurements of pre and post-tests showed significantly different values after PFT in: 9 minute running test, medicine ball throw, horizontal jump, abdominal endurance, running speed and flexibility. After PAS differences were detected in abdominal endurance, agility, running speed and flexibility. The intervention with programmed physical activity promoted more changes in the physical abilities; however, in the self-selected program, agility was improved probably because of the practice of sports. Therefore, physical education teachers can use PFT to improve cardiorespiratory fitness and power of lower and upper limbs and PAS to improve agility of high school adolescents.

The Adopt-a-School Service-Learning Program: Igniting Comprehensive School Physical Activity Programs through School and University Partnerships

Science.gov (United States)

Linker, Jenny M.; Ford, Kristen M.; Knutson, Julie M.; Goplen, Hailey A.

2018-01-01

Physical educators have been identified as ideal school champions to lead comprehensive school physical activity program (CSPAP) efforts within their schools. As such, they should be adequately prepared to take on this role. Faculty from three physical and health education teacher education programs have collaboratively developed the…

45 CFR 660.3 - What programs and activities of the Foundation are subject to these regulations?

Science.gov (United States)

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false What programs and activities of the Foundation are... (Continued) NATIONAL SCIENCE FOUNDATION INTERGOVERNMENTAL REVIEW OF THE NATIONAL SCIENCE FOUNDATION PROGRAMS AND ACTIVITIES § 660.3 What programs and activities of the Foundation are subject to these regulations...

Active epidemiological surveillance in the program of poliomyelitis eradication in Serbia

Directory of Open Access Journals (Sweden)

Jevremović Ivana

2002-01-01

Full Text Available The main strategy of the worldwide Program of Poliomyelitis Eradication is based on immunization with oral poliovirus vaccine and active epidemiological surveillance aimed to demonstrate the absence of wild poliovirus circulation. The specification of the surveillance in the program, reporting and investigation of certain syndrome – the acute flaccid paralysis - as a specific feature of surveillance of poliomyelitis, is a new experience both for clinicians and epidemiologists. Along with the achieved results, problems in conducting the active epidemiological surveillance in Serbia, applied measures, and suggestions for improving its quality were presented. This experience might help in implementing the active surveillance for some other diseases that could be prevented by vaccine immunization.

Impact of an After-School Physical Activity Program on Youth's Physical Activity Correlates and Behavior

Science.gov (United States)

Huang, Chaoqun; Gao, Zan; Hannon, James C.; Schultz, Barry; Newton, Maria; Jenson, William

2012-01-01

The purpose of this investigation was to examine the effect of a sports-based, after-school physical activity (PA) program on youth's physical activity PA levels and PA correlates. After the pretest, 130 youth were assigned to the intervention group (i.e., after-school PA group) or the comparison (i.e., no after-school PA group) group.…

Initiating and Strengthening College and University Instructional Physical Activity Programs

Science.gov (United States)

Sweeney, Michelle M.

2011-01-01

The National Association for Sport and Physical Education supports the offering of strong college and university instructional physical activity programs (C/UIPAPs). With a rapid decline in physical activity levels, high stress levels, and unhealthy weight-loss practices among college-age students, it is apparent that C/UIPAPs embedded in the…

The Joint Space Operations Center Mission System and the Advanced Research, Collaboration, and Application Development Environment Status Update 2016

Science.gov (United States)

Murray-Krezan, Jeremy; Howard, Samantha; Sabol, Chris; Kim, Richard; Echeverry, Juan

2016-05-01

The Joint Space Operations Center (JSpOC) Mission System (JMS) is a service-oriented architecture (SOA) infrastructure with increased process automation and improved tools to enhance Space Situational Awareness (SSA) performed at the US-led JSpOC. The Advanced Research, Collaboration, and Application Development Environment (ARCADE) is a test-bed maintained and operated by the Air Force to (1) serve as a centralized test-bed for all research and development activities related to JMS applications, including algorithm development, data source exposure, service orchestration, and software services, and provide developers reciprocal access to relevant tools and data to accelerate technology development, (2) allow the JMS program to communicate user capability priorities and requirements to developers, (3) provide the JMS program with access to state-of-the-art research, development, and computing capabilities, and (4) support JMS Program Office-led market research efforts by identifying outstanding performers that are available to shepherd into the formal transition process. In this paper we will share with the international remote sensing community some of the recent JMS and ARCADE developments that may contribute to greater SSA at the JSpOC in the future, and share technical areas still in great need.

49 CFR 17.3 - What programs and activities of the Department are subject to these regulations?

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What programs and activities of the Department are subject to these regulations? 17.3 Section 17.3 Transportation Office of the Secretary of Transportation INTERGOVERNMENTAL REVIEW OF DEPARTMENT OF TRANSPORTATION PROGRAMS AND ACTIVITIES § 17.3 What programs and activities...

Activity, exposure rate and spectrum prediction with Java programming

International Nuclear Information System (INIS)

Sahin, D.; Uenlue, K.

2009-01-01

In order to envision the radiation exposure during Neutron Activation Analysis (NAA) experiments, a software called Activity Predictor is developed using Java TM programming language. The Activity Predictor calculates activities, exposure rates and gamma spectra of activated samples for NAA experiments performed at Radiation Science and Engineering Center (RSEC), Penn State Breazeale Reactor (PSBR). The calculation procedure for predictions involves both analytical and Monte Carlo methods. The Activity Predictor software is validated with a series of activation experiments. It has been found that Activity Predictor software calculates the activities and exposure rates precisely. The software also predicts gamma spectrum for each measurement. The predicted spectra agreed partially with measured spectra. The error in net photo peak areas varied from 4.8 to 51.29%, which is considered to be due to simplistic modeling, statistical fluctuations and unknown contaminants in the samples. (author)

ROW (Right-of-Way) interfering construction activities management program

Energy Technology Data Exchange (ETDEWEB)

Rosito, Roberta; Oliveira, Marisa; Lima, Shirley [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

2009-07-01

A significant portion of pipeline failures occurs due to external damage. This includes third party right of way (ROW) encroachment, which shall be identified and avoided. However, injuries caused by known and planned activities do happen. Construction of crossing or sharing ROW pipelines, crossing roads and bridges, neighboring buildings and excavations of any kind might put existing pipelines in risk. This paper presents how the TRANSPETRO ROW Interfering Construction Activities Management Program is implemented by a regional ROW maintenance department responsible for more than 3,000 km of pipelines, mostly in Rio de Janeiro and Minas Gerais states. This program is based on a TRANSPETRO procedure that was written after the publication of the Official Order number 125 of ANP (Oil, Gas and Biofuel Brazilian National Agency). Tasks from design review and approval to field construction supervision are performed by the staff responsible for the routine patrols and maintenance management. The ability of foreseeing risky activities is improved by expertise gained from day-to-day work on site. (author)

Oak Ridge TNS Program: summary of FY 1978 activities

International Nuclear Information System (INIS)

Steiner, D.; Becraft, W.R.; Brown, T.G.

1979-07-01

The Next Step (TNS) represents the stage of fusion energy development in which the major emphasis is on engineering testing and demonstration. In this document, the activities of the Oak Ridge TNS Program for FY 1978 are described and summarized. The Reference Design that has evolved from these activities is described, its operating characteristics are examined, and project planning issues are considered. Major conclusions from the FY 1978 effort are stated

Physical activity stimulation program for children with cerebral palsy did not improve physical activity: a randomised trial

NARCIS (Netherlands)

van Wely, L.; Balemans, A.C.J.; Becher, J.G.; Dallmeijer, A.J.

2014-01-01

Question: In children with cerebral palsy, does a 6-month physical activity stimulation program improve physical activity, mobility capacity, fitness, fatigue and attitude towards sports more than usual paediatric physiotherapy? Design: Multicentre randomised controlled trial with concealed

Human Research Program Science Management: Overview of Research and Development Activities

Science.gov (United States)

Charles, John B.

2007-01-01

An overview of research and development activities of NASA's Human Research Science Management Program is presented. The topics include: 1) Human Research Program Goals; 2) Elements and Projects within HRP; 3) Development and Maintenance of Priorities; 4) Acquisition and Evaluation of Research and Technology Proposals; and 5) Annual Reviews

Impacting Children’s Health and Academic Performance through Comprehensive School Physical Activity Programming

Directory of Open Access Journals (Sweden)

Timothy A. BRUSSEAU

2015-06-01

Full Text Available Physical activity is associated with numerous academic and health benefits. Furthermore, schools have been identified as an ideal location to promote physical activity as most youth attend school regularly from ages 5-18. Unfortunately, in an effort to increase academic learning time, schools have been eliminating traditional activity opportunities including physical education and recess. To combat physical inactivity in you, numerous organizations are promoting a Comprehensive School Physical Activity Program to encourage academic achievement and overall health. Comprehensive School Physical Activity Programs include five components and should be centered around 1 quality physical education, 2 physical activity before and after school, 3 physical activity during school (both recess and classroom activity, 4 staff involvement, and 5 family and community engagement.

Offshore oil and gas activities in the PERD program

Energy Technology Data Exchange (ETDEWEB)

Billette, N. [Natural Resources Canada, Ottawa, ON (Canada). Office of Energy Research and Development

2001-07-01

Natural Resources Canada manages the Program of Energy Research and Development (PERD), which covers all but a few of non-nuclear energy areas. The aim of the Program is to focus on research and technology developments that support a dynamic and diversified energy supply, while encouraging industries to consume the energy efficiently. Twelve federal departments and agencies are stakeholders in energy research and development and the 57 million dollar annual budget is allocated amongst the stakeholders according to the priorities established. Each year, one-quarter of the program is evaluated externally and potential reallocation examined, a recent initiative implemented as part of a results-based management (RBM) system. Five federal departments and one agency carry out offshore research and development activities, touching the fields of basin assessment and geotechnics in the Canadian North and offshore East Coast, winds-wave-current modelling, the management of sea ice, iceberg and ice-structure interactions, ship design and navigation issues. In this last category, activities related to offshore safety, management of offshore drilling and production wastes, oil spills remediation, and assessment of cumulative effects of wastes and produced waters are included. These activities are detailed in the presentation, and the author discussed the future shifts likely to occur in PERD so that the needs of the regulatory agencies in terms of science and technology are met. There is also the aspect of the protection of the interests of the Canadian public to consider. 1 tab.

Developing an active implementation model for a chronic disease management program.

Science.gov (United States)

Smidth, Margrethe; Christensen, Morten Bondo; Olesen, Frede; Vedsted, Peter

2013-04-01

Introduction and diffusion of new disease management programs in healthcare is usually slow, but active theory-driven implementation seems to outperform other implementation strategies. However, we have only scarce evidence on the feasibility and real effect of such strategies in complex primary care settings where municipalities, general practitioners and hospitals should work together. The Central Denmark Region recently implemented a disease management program for chronic obstructive pulmonary disease (COPD) which presented an opportunity to test an active implementation model against the usual implementation model. The aim of the present paper is to describe the development of an active implementation model using the Medical Research Council's model for complex interventions and the Chronic Care Model. We used the Medical Research Council's five-stage model for developing complex interventions to design an implementation model for a disease management program for COPD. First, literature on implementing change in general practice was scrutinised and empirical knowledge was assessed for suitability. In phase I, the intervention was developed; and in phases II and III, it was tested in a block- and cluster-randomised study. In phase IV, we evaluated the feasibility for others to use our active implementation model. The Chronic Care Model was identified as a model for designing efficient implementation elements. These elements were combined into a multifaceted intervention, and a timeline for the trial in a randomised study was decided upon in accordance with the five stages in the Medical Research Council's model; this was captured in a PaTPlot, which allowed us to focus on the structure and the timing of the intervention. The implementation strategies identified as efficient were use of the Breakthrough Series, academic detailing, provision of patient material and meetings between providers. The active implementation model was tested in a randomised trial

Sensor System Performance Evaluation and Benefits from the NPOESS Airborne Sounder Testbed-Interferometer (NAST-I)

Science.gov (United States)

Larar, A.; Zhou, D.; Smith, W.

2009-01-01

Advanced satellite sensors are tasked with improving global-scale measurements of the Earth's atmosphere, clouds, and surface to enable enhancements in weather prediction, climate monitoring, and environmental change detection. Validation of the entire measurement system is crucial to achieving this goal and thus maximizing research and operational utility of resultant data. Field campaigns employing satellite under-flights with well-calibrated FTS sensors aboard high-altitude aircraft are an essential part of this validation task. The National Polar-orbiting Operational Environmental Satellite System (NPOESS) Airborne Sounder Testbed-Interferometer (NAST-I) has been a fundamental contributor in this area by providing coincident high spectral/spatial resolution observations of infrared spectral radiances along with independently-retrieved geophysical products for comparison with like products from satellite sensors being validated. This paper focuses on some of the challenges associated with validating advanced atmospheric sounders and the benefits obtained from employing airborne interferometers such as the NAST-I. Select results from underflights of the Aqua Atmospheric InfraRed Sounder (AIRS) and the Infrared Atmospheric Sounding Interferometer (IASI) obtained during recent field campaigns will be presented.

Active Structural Control for Aircraft Efficiency with the X-56A Aircraft

Science.gov (United States)

Ouellette, Jeffrey

2015-01-01

The X-56A Multi-Utility Technology Testbed is an experimental aircraft designed to study active control of flexible structures. The vehicle is easily reconfigured to allow for testing of different configurations. The vehicle is being used to study new sensor, actuator, modeling and controls technologies. These new technologies will allow for lighter vehicles and new configurations that exceed the efficiency currently achievable. A description of the vehicle and the current research efforts that it enables are presented.

Project Morpheus: Lean Development of a Terrestrial Flight Testbed for Maturing NASA Lander Technologies

Science.gov (United States)

Devolites, Jennifer L.; Olansen, Jon B.

2015-01-01

NASA's Morpheus Project has developed and tested a prototype planetary lander capable of vertical takeoff and landing that is designed to serve as a testbed for advanced spacecraft technologies. The lander vehicle, propelled by a Liquid Oxygen (LOX)/Methane engine and sized to carry a 500kg payload to the lunar surface, provides a platform for bringing technologies from the laboratory into an integrated flight system at relatively low cost. In 2012, Morpheus began integrating the Autonomous Landing and Hazard Avoidance Technology (ALHAT) sensors and software onto the vehicle in order to demonstrate safe, autonomous landing and hazard avoidance. From the beginning, one of goals for the Morpheus Project was to streamline agency processes and practices. The Morpheus project accepted a challenge to tailor the traditional NASA systems engineering approach in a way that would be appropriate for a lower cost, rapid prototype engineering effort, but retain the essence of the guiding principles. This paper describes the tailored project life cycle and systems engineering approach for the Morpheus project, including the processes, tools, and amount of rigor employed over the project's multiple lifecycles since the project began in fiscal year (FY) 2011.

Activity Learning as a Foundation for Security Monitoring in Smart Homes.

Science.gov (United States)

Dahmen, Jessamyn; Thomas, Brian L; Cook, Diane J; Wang, Xiaobo

2017-03-31

Smart environment technology has matured to the point where it is regularly used in everyday homes as well as research labs. With this maturation of the technology, we can consider using smart homes as a practical mechanism for improving home security. In this paper, we introduce an activity-aware approach to security monitoring and threat detection in smart homes. We describe our approach using the CASAS smart home framework and activity learning algorithms. By monitoring for activity-based anomalies we can detect possible threats and take appropriate action. We evaluate our proposed method using data collected in CASAS smart homes and demonstrate the partnership between activity-aware smart homes and biometric devices in the context of the CASAS on-campus smart apartment testbed.

Activity Learning as a Foundation for Security Monitoring in Smart Homes

Directory of Open Access Journals (Sweden)

Jessamyn Dahmen

2017-03-01

Full Text Available Smart environment technology has matured to the point where it is regularly used in everyday homes as well as research labs. With this maturation of the technology, we can consider using smart homes as a practical mechanism for improving home security. In this paper, we introduce an activity-aware approach to security monitoring and threat detection in smart homes. We describe our approach using the CASAS smart home framework and activity learning algorithms. By monitoring for activity-based anomalies we can detect possible threats and take appropriate action. We evaluate our proposed method using data collected in CASAS smart homes and demonstrate the partnership between activity-aware smart homes and biometric devices in the context of the CASAS on-campus smart apartment testbed.

76 FR 69204 - Anti-Money Laundering Program and Suspicious Activity Reporting Requirements for Housing...

Science.gov (United States)

2011-11-08

... 1506-AB14 Anti-Money Laundering Program and Suspicious Activity Reporting Requirements for Housing... enterprises as financial institutions for the purpose of requiring them to establish anti-money laundering... organizations to establish anti-money laundering programs and report suspicious activities is intended to help...

13 CFR 101.401 - What programs and activities of SBA are subject to this subpart?

Science.gov (United States)

2010-01-01

... ADMINISTRATION ADMINISTRATION Intergovernmental Partnership § 101.401 What programs and activities of SBA are subject to this subpart? SBA publishes in the Federal Register a list of programs and activities subject...

NikeGO: a Corporate-Sponsored Program to Increase Physical Activity and Foster Youth Development

Directory of Open Access Journals (Sweden)

Sarah Levin Martin

2007-06-01

Full Text Available NikeGO was initiated in 2002 by the Nike US Community Affairs Division to address a growing need: to provide youth a safe environment in which to be physically active. Nike collaborated with several organizations across the country and offered an array of programs to foster developmentally appropriate physical activity among youth through their influencers (e.g., teachers, coaches. These programs reached youth in underserved areas ranging from urban inner cities to rural Native lands through various channels and settings including schools, Boys and Girls Clubs, YMCA’s, youth sports organizations, and others. Objective and subjective measures were used to determine the reach of the program, the dose of physical activity, the “fun” level of the activities, changes in youths’ self-esteem and self-concept, and the likelihood of continued participation. Many older youth gained leadership skills in the process. Overall, the programs have been successful in reaching “hard to reach” youth and engaging them in the positive, developmentally sensitive, health behaviors.

Synergism in work site adoption of employee assistance programs and health promotion activities.

Science.gov (United States)

Blum, T C; Roman, P M; Patrick, L

1990-05-01

As workplaces increasingly adopt proactive programs directed toward employee health issues, the interrelation between different programs becomes an important issue. Of interest here is the "synergy" in patterns of program adoption between employee assistance programs (EAPs) and health promotion activities (HPAs). We utilize the 1985 National Survey of Worksite Health Promotion Activities (N = 1358) for analyses of the dual presence of EAPs and HPAs, and in multivariate analyses we consider factors affecting such dual presence. The data suggest that synergy occurs, with EAP adoption appearing to influence HPA adoption to a greater extent than the reverse. In multivariate analyses, synergy is confirmed by the finding that, among a variety of relevant organizational characteristics, EAP presence and HPA presence are the best predictors of each other's presence. The analyses also indicate that there is minimal commonality in program ingredients across organizations reporting the presence of HPAs. Implications of the data for the future development of these two programming strategies are discussed.

Cognitive intervention through a training program for picture book reading in community-dwelling older adults: a randomized controlled trial.

Science.gov (United States)

Suzuki, Hiroyuki; Kuraoka, Masataka; Yasunaga, Masashi; Nonaka, Kumiko; Sakurai, Ryota; Takeuchi, Rumi; Murayama, Yoh; Ohba, Hiromi; Fujiwara, Yoshinori

2014-11-21

Non-pharmacological interventions are expected to be important strategies for reducing the age-adjusted prevalence of senile dementia, considering that complete medical treatment for cognitive decline has not yet been developed. From the viewpoint of long-term continuity of activity, it is necessary to develop various cognitive stimulating programs. The aim of this study is to examine the effectiveness of a cognitive intervention through a training program for picture book reading for community-dwelling older adults. Fifty-eight Japanese older participants were divided into the intervention and control groups using simple randomization (n =29 vs 29). In the intervention group, participants took part in a program aimed at learning and mastering methods of picture book reading as a form of cognitive training intervention. The control group listened to lectures about elderly health maintenance. Cognitive tests were conducted individually before and after the programs. The rate of memory retention, computed by dividing Logical Memory delayed recall by immediate recall, showed a significant interaction (p < .05) in analysis of covariance. Simple main effects showed that the rate of memory retention of the intervention group improved after the program completion (p < .05). In the participants with mild cognitive impairment (MCI) examined by Japanese version of the Montreal Cognitive Assessment (MoCA-J) (n =14 vs 15), significant interactions were seen in Trail Making Test-A (p < .01), Trail Making Test-B (p < .05), Kana pick-out test (p < .05) and the Mini-Mental State Examination (p < .05). The intervention effect was found in delayed verbal memory. This program is also effective for improving attention and executive function in those with MCI. The short-term interventional findings suggest that this program might contribute to preventing a decline in memory and executive function. UMIN000014712 (Date of ICMJE and WHO compliant trial information

Research and development of a phosphoric acid fuel cell/battery power source integrated in a test-bed bus. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-05-30

This project, the research and development of a phosphoric acid fuel cell/battery power source integrated into test-bed buses, began as a multi-phase U.S. Department of Energy (DOE) project in 1989. Phase I had a goal of developing two competing half-scale (25 kW) brassboard phosphoric acid fuel cell systems. An air-cooled and a liquid-cooled fuel cell system were developed and tested to verify the concept of using a fuel cell and a battery in a hybrid configuration wherein the fuel cell supplies the average power required for operating the vehicle and a battery supplies the `surge` or excess power required for acceleration and hill-climbing. Work done in Phase I determined that the liquid-cooled system offered higher efficiency.

Playing by Programming: Making Gameplay a Programming Activity

Science.gov (United States)

Weintrop, David; Wilensky, Uri

2016-01-01

Video games are an oft-cited reason for young learners getting interested in programming and computer science. As such, many learning opportunities build on this interest by having kids program their own video games. This approach, while sometimes successful, has its drawbacks stemming from the fact that the challenge of programming and game…

Effect of programmed physical activity on the physical fitness of adolescent students

OpenAIRE

Edson Dos Santos Farias; Wellington Roberto Gomes Carvalho; Ezequiel Moreira Gonçalves; Gil Guerra Guerra-Júnior

2010-01-01

The objective of this study was to determine the influence of programmed physical activity on the physical fitness of adolescent students over one school year. The sample consisted of 383 students (age range: 10 to 14 years) divided into two groups: 186 cases (96 boys and 90 girls) and 197 controls (108 boys and 89 girls). An intervention study with pre- and post-tests was conducted, in which the intervention group was submitted to programmed physical activity, while the control group underwe...

34 CFR 403.70 - How must funds be used under the State Programs and State Leadership Activities?

Science.gov (United States)

2010-07-01

... State Leadership Activities? 403.70 Section 403.70 Education Regulations of the Offices of the... the Basic Programs? State Programs and State Leadership Activities § 403.70 How must funds be used under the State Programs and State Leadership Activities? A State shall use funds reserved under section...

Impact of activities in self-esteem of patients in a pulmonary rehabilitation program.

Science.gov (United States)

Oliveira, Juliana Nascimento de; Tavares, Cecilia Melo Rosa; Squassoni, Selma Denis; Machado, Nadine Cristina; Cordoni, Priscila Kessar; Bortolassi, Luciene Costa; Lapa, Mônica Silveira; Fiss, Elie

2015-01-01

To evaluate self-esteem and self-image of respiratory diseases patients in a Pulmonary Rehabilitation Program, who participated in socialization and physical fitness activities, and of patients who participated only in physical fitness sessions. A descriptive cross-sectional exploratory study. Out of a total of 60 patients analyzed, all enrolled in the Pulmonary Rehabilitation Program, 42 participated in at least one of the proposed activities, 10 did not participate in any activity and 8 were excluded (7 were discharged and 1 died). When the two groups were compared, despite the fact that both demonstrated low self-esteem and self-image, the difference between them was relevant (pself-esteem, indicating that those who participated in the proposed socialization activities had better self-esteem than the individuals who only did the physical fitness sessions. Regarding self-image, the difference between the groups was not relevant (p>0.05). The Pulmonary Rehabilitation Program patients evaluated presented low self-esteem and self-image; however, those carrying out some socialization activity proposed had better self-esteem as compared to the individuals who did only the physical fitness sessions.

Monitoring Activities Review action report for the Environmental Monitoring Program

International Nuclear Information System (INIS)

Wilhelmsen, R.N.; Wright, K.C.

1990-12-01

To improve program planning and to provide bases for technical improvement of the monitoring program, the EG ampersand G Environmental Monitoring (EM) organization has regularly used the Monitoring Activities Review (MAR) process since 1982. Each MAR is conducted by a committee of individuals selected for their experience in the various types of monitoring performed by the EM organization. An MAR of the Environmental Monitoring Program was conducted in 1988. This action report identifies and discusses the recommendations of this MAR committee. This action report also identifies the actions already taken by the EM Unit in response to these recommendations, as well as the actions and schedules to be taken. 10 refs

Long-term Evaluation of the "Get Fit for Active Living" Program.

Science.gov (United States)

Stathokostas, Liza; Speechley, Mark; Little, Robert M D; Doerksen, Shawna; Copeland, Jennifer; Paterson, Donald H

2017-03-01

This study examined six- and 12-month levels of adherence to physical activity, functional changes, and psychosocial determinants of physical activity in 176 older adults who participated in the "Get Fit for Active Living (GFAL)" pilot program. Functional and psychosocial measures were conducted in person at six months; psychosocial measures and physical activity participation were assessed by telephone interview at 12 months. Ninety-five per cent were retained in the study at the six-month follow-up, and 88 per cent at 12 months. The self-reported adherence rate to exercise at 12 months was 66 per cent. The main reason for continued exercise participation was to maintain health (45%). Reasons for nonadherence were illness (38%) and lack of motivation (32%). Results identify factors associated with positive behaviour change that health promoters can utilize when targeting the older adult population. The GFAL project results can serve as a model for sustainable, community-based older-adult exercise programs.

Physical Education Preservice Teachers' Perceptions About Preparation for Comprehensive School Physical Activity Programs.

Science.gov (United States)

Kwon, Ja Youn; Kulinna, Pamela Hodges; van der Mars, Hans; Koro-Ljungberg, Mirka; Amrein-Beardsley, Audrey; Norris, Jason

2018-06-01

Physical educators may be the responsible people for implementing comprehensive school physical activity programs (CSPAPs) in schools. However, it is unclear whether physical education teacher education (PETE) programs provide the relevant learning opportunities to preservice teachers for CSPAP implementation. The purpose of this study was to understand preservice teachers' perspectives and experiences of CSPAP preparation in their PETE programs. Fourteen PETE students from 6 different universities participated and shared their experiences in PETE programs. Data were collected through a short survey, 1 formal interview, field images, document gathering, and an additional survey to follow up the interview. Descriptive statistics, constant comparison, and analytic induction techniques were used to analyze the data. Participants' familiarity with CSPAPs was related to positive opinions about the role of physical educators in CSPAPs. Three common themes were revealed: (a) introducing CSPAP via courses, (b) the lack of programwide hands-on experiences for CSPAP, and (c) limited preparation for social skills with stakeholders. Participants' perceptions of the role of physical educators as physical activity leaders had been expanded during their training. The participating PETE programs integrated CSPAP components in the existing courses to introduce CSPAP, while there was a lack of sufficient practical opportunities to learn how to implement (aspects of) a CSPAP. Participants felt they were insufficiently prepared to promote and implement expanded physical activity programming beyond physical education classes in schools. The majority of the PETE preservice teachers wanted more practical CSPAP experiences in their programs.

Physical activity programs for promoting bone mineralization and growth in preterm infants.

Science.gov (United States)

Schulzke, Sven M; Kaempfen, Siree; Trachsel, Daniel; Patole, Sanjay K

2014-04-22

Lack of physical stimulation may contribute to metabolic bone disease of preterm infants, resulting in poor bone mineralization and growth. Physical activity programs combined with adequate nutrition might help to promote bone mineralization and growth. The primary objective was to assess whether physical activity programs in preterm infants improve bone mineralization and growth and reduce the risk of fracture.The secondary objectives included other potential benefits in terms of length of hospital stay, skeletal deformities and neurodevelopmental outcomes, and adverse events.Subgroup analysis:• Given that the smallest infants are most vulnerable for developing osteopenia (Bishop 1999), a subgroup analysis was planned for infants with birth weight affect an infant's ability to increase bone mineral content (Kuschel 2004). Therefore, an additional subgroup analysis was planned for infants receiving different amounts of calcium and phosphorus, along with full enteral feeds as follows. ∘ Below 100 mg/60 mg calcium/phosphorus or equal to/above 100 mg/60 mg calcium/phosphorus per 100 mL milk. ∘ Supplementation of calcium without phosphorus. ∘ Supplementation of phosphorus without calcium. The standard search strategy of the Cochrane Neonatal Review Group (CNRG) was used. The search included the Cochrane Central Register of Controlled Trials (CENTRAL) (2012, Issue 9), MEDLINE, EMBASE, CINAHL (1966 to March 2013), and cross-references, as well as handsearching of abstracts of the Society for Pediatric Research and the International Journal of Sports Medicine. Randomized and quasi-randomized controlled trials comparing physical activity programs (extension and flexion, range-of-motion exercises) versus no organized physical activity programs in preterm infants. Data collection, study selection, and data analysis were performed according to the methods of the CNRG. Eleven trials enrolling 324 preterm infants (gestational age 26 to 34 weeks) were included in this

Cultivating Leadership, Pedagogy and Programming for CSPAP and Healthy, Active Lifestyles at the University of Idaho

Science.gov (United States)

Goc Karp, Grace; Brown, Helen; Scruggs, Philip W.; Berei, Catherine

2017-01-01

This article highlights processes for infusing comprehensive school physical activity programming (CSPAP) into the physical education teacher education (PETE) program at the University of Idaho (UI). The PETE program uses a modified leadership framework to target learning outcomes and activities pertinent to CSPAP. Student CSPAP knowledge and…

A Million Steps: Developing a Health Promotion Program at the Workplace to Enhance Physical Activity.

Science.gov (United States)

González-Dominguez, María Eugenia; Romero-Sánchez, José Manuel; Ares-Camerino, Antonio; Marchena-Aparicio, Jose Carlos; Flores-Muñoz, Manuel; Infantes-Guzmán, Inés; León-Asuero, José Manuel; Casals-Martín, Fernando

2017-11-01

The workplace is a key setting for the prevention of occupational risks and for promoting healthy activities such as physical activity. Developing a physically active lifestyle results in many health benefits, improving both well-being and quality of life. This article details the experience of two Spanish companies that implemented a program to promote physical exercise in the workplace, called "A Million Steps." This program aimed to increase the physical activity of participants, challenging them to reach at least a million steps in a month through group walks. Participant workers reached the set goal and highlighted the motivational and interpersonal functions of the program.

An overview of the U.S. Army Research Laboratory's Sensor Information Testbed for Collaborative Research Environment (SITCORE) and Automated Online Data Repository (AODR) capabilities

Science.gov (United States)

Ward, Dennis W.; Bennett, Kelly W.

2017-05-01

The Sensor Information Testbed COllaberative Research Environment (SITCORE) and the Automated Online Data Repository (AODR) are significant enablers of the U.S. Army Research Laboratory (ARL)'s Open Campus Initiative and together create a highly-collaborative research laboratory and testbed environment focused on sensor data and information fusion. SITCORE creates a virtual research development environment allowing collaboration from other locations, including DoD, industry, academia, and collation facilities. SITCORE combined with AODR provides end-toend algorithm development, experimentation, demonstration, and validation. The AODR enterprise allows the U.S. Army Research Laboratory (ARL), as well as other government organizations, industry, and academia to store and disseminate multiple intelligence (Multi-INT) datasets collected at field exercises and demonstrations, and to facilitate research and development (R and D), and advancement of analytical tools and algorithms supporting the Intelligence, Surveillance, and Reconnaissance (ISR) community. The AODR provides a potential central repository for standards compliant datasets to serve as the "go-to" location for lessons-learned and reference products. Many of the AODR datasets have associated ground truth and other metadata which provides a rich and robust data suite for researchers to develop, test, and refine their algorithms. Researchers download the test data to their own environments using a sophisticated web interface. The AODR allows researchers to request copies of stored datasets and for the government to process the requests and approvals in an automated fashion. Access to the AODR requires two-factor authentication in the form of a Common Access Card (CAC) or External Certificate Authority (ECA)

Activities of the OECD/NEA Data Bank and its computer program service

International Nuclear Information System (INIS)

Sartori, E.

1991-01-01

The OECD/NEA Data Bank collects, tests and distributes computer programs and numerical data in the field of nuclear energy applications. This activity is coordinated with several similar centres in the United States (NESC, NNDC, RSIC) and outside the OECD are through an arrangement with the IAEA. This valuable information is shared worldwide for the benefit of scientists and engineers working on the safe and economic use of nuclear energy for peaceful applications. This article covers mainly the activities of the computer program service. (author). 4 figs

Laboratory Spacecraft Data Processing and Instrument Autonomy: AOSAT as Testbed

Science.gov (United States)

Lightholder, Jack; Asphaug, Erik; Thangavelautham, Jekan

2015-11-01

Recent advances in small spacecraft allow for their use as orbiting microgravity laboratories (e.g. Asphaug and Thangavelautham LPSC 2014) that will produce substantial amounts of data. Power, bandwidth and processing constraints impose limitations on the number of operations which can be performed on this data as well as the data volume the spacecraft can downlink. We show that instrument autonomy and machine learning techniques can intelligently conduct data reduction and downlink queueing to meet data storage and downlink limitations. As small spacecraft laboratory capabilities increase, we must find techniques to increase instrument autonomy and spacecraft scientific decision making. The Asteroid Origins Satellite (AOSAT) CubeSat centrifuge will act as a testbed for further proving these techniques. Lightweight algorithms, such as connected components analysis, centroid tracking, K-means clustering, edge detection, convex hull analysis and intelligent cropping routines can be coupled with the tradition packet compression routines to reduce data transfer per image as well as provide a first order filtering of what data is most relevant to downlink. This intelligent queueing provides timelier downlink of scientifically relevant data while reducing the amount of irrelevant downlinked data. Resulting algorithms allow for scientists to throttle the amount of data downlinked based on initial experimental results. The data downlink pipeline, prioritized for scientific relevance based on incorporated scientific objectives, can continue from the spacecraft until the data is no longer fruitful. Coupled with data compression and cropping strategies at the data packet level, bandwidth reductions exceeding 40% can be achieved while still downlinking data deemed to be most relevant in a double blind study between scientist and algorithm. Applications of this technology allow for the incorporation of instrumentation which produces significant data volumes on small spacecraft

Developing, Implementing, and Evaluating a Condom Promotion Program Targeting Sexually Active Adolescents.

Science.gov (United States)

Alstead, Mark; Campsmith, Michael; Halley, Carolyn Swope; Hartfield, Karen; Goldblum, Gary; Wood, Robert W.

1999-01-01

Describes the development, implementation, and evaluation of an HIV prevention program promoting condom use among sexually active adolescents. It mobilized target communities to guide program development and implementation; created a mass media campaign to promote correct condom use; and recruited public agencies and organizations to distribute…

Developmental programming of energy balance regulation: is physical activity more 'programmable' than food intake?

Science.gov (United States)

Zhu, Shaoyu; Eclarinal, Jesse; Baker, Maria S; Li, Ge; Waterland, Robert A

2016-02-01

Extensive human and animal model data show that environmental influences during critical periods of prenatal and early postnatal development can cause persistent alterations in energy balance regulation. Although a potentially important factor in the worldwide obesity epidemic, the fundamental mechanisms underlying such developmental programming of energy balance are poorly understood, limiting our ability to intervene. Most studies of developmental programming of energy balance have focused on persistent alterations in the regulation of energy intake; energy expenditure has been relatively underemphasised. In particular, very few studies have evaluated developmental programming of physical activity. The aim of this review is to summarise recent evidence that early environment may have a profound impact on establishment of individual propensity for physical activity. Recently, we characterised two different mouse models of developmental programming of obesity; one models fetal growth restriction followed by catch-up growth, and the other models early postnatal overnutrition. In both studies, we observed alterations in body-weight regulation that persisted to adulthood, but no group differences in food intake. Rather, in both cases, programming of energy balance appeared to be due to persistent alterations in energy expenditure and spontaneous physical activity (SPA). These effects were stronger in female offspring. We are currently exploring the hypothesis that developmental programming of SPA occurs via induced sex-specific alterations in epigenetic regulation in the hypothalamus and other regions of the central nervous system. We will summarise the current progress towards testing this hypothesis. Early environmental influences on establishment of physical activity are likely an important factor in developmental programming of energy balance. Understanding the fundamental underlying mechanisms in appropriate animal models will help determine whether early life

Design of a Loose Part Monitoring System Test-bed using CompactRIO

Energy Technology Data Exchange (ETDEWEB)

Kim, Min-seok; Lee, Kwang-Dae; Lee, Eui-Jong [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

A loose part monitoring system (LPMS) is included in the NSSS integrity monitoring system (NIMS), which serves to detect loose parts in reactor coolant systems (RCS). LPMSs at Nuclear Power Plants (NPPs) in Korea follow the ASME OM standard and acquire data from 18 sensors simultaneously. Data acquisition requires a sampling rate of more than 50KHz along with a 12bit A/D converter. Existing LPMS equipment is composed of several different platforms, such as a digital signal processor (DSP), a field-programmable gate array (FPGA), a micro control unit (MCU), and electric circuit cards. These systems have vulnerabilities, such as discontinuance due to aging and incompatibility issues between different pieces of equipment. This paper suggests CompactRIO as a new platform. We devised a Test-bed using CompactRIO and demonstrate that the proposed method meets the criteria required by the standard. The LPMS provides an alert when an impact event occurs and provides information with which to analyze the location, energy, and mass of the loose parts. LPMSs in NPPs in Korea operate on a variety of platforms. Thus, these systems are vulnerable to discontinuances due to aging and incompatibilities arising from the use of different type of equipment. In order to solve these problems, this paper suggests CompactRIO as a new platform. It is a rugged, reconfigurable, high-performance industrial embedded system. The results of performance tests meet the criteria set by the current standard.

Assessing the quality of activities in a smart environment.

Science.gov (United States)

Cook, Diane J; Schmitter-Edgecombe, M

2009-01-01

Pervasive computing technology can provide valuable health monitoring and assistance technology to help individuals live independent lives in their own homes. As a critical part of this technology, our objective is to design software algorithms that recognize and assess the consistency of activities of daily living that individuals perform in their own homes. We have designed algorithms that automatically learn Markov models for each class of activity. These models are used to recognize activities that are performed in a smart home and to identify errors and inconsistencies in the performed activity. We validate our approach using data collected from 60 volunteers who performed a series of activities in our smart apartment testbed. The results indicate that the algorithms correctly label the activities and successfully assess the completeness and consistency of the performed task. Our results indicate that activity recognition and assessment can be automated using machine learning algorithms and smart home technology. These algorithms will be useful for automating remote health monitoring and interventions.

STEM after School: How to Design and Run Great Programs and Activities. A Guidebook for Program Leaders, Second Edition

Science.gov (United States)

ExpandED Schools, 2014

2014-01-01

This guidebook was prepared by TASC (The After-School Corporation) and their Frontiers in Urban Science Education (FUSE) programs. FUSE is TASC's initiative to help more out-of-school-time programs and expanded learning time schools offer kids engaging, exciting and inspiring activities that promote science inquiry. The guidebook offers a a…

Assessment of Practical Research-Based Activity Program as a Tool ...

African Journals Online (AJOL)

practical research–based activity program (PRBAP) may be considered as a good way for learning at medical schools; ... nervous system, cardiovascular, respiratory and ..... our department where the higher grades depend on the recall and ...

LDRD 2012 Annual Report: Laboratory Directed Research and Development Program Activities

Energy Technology Data Exchange (ETDEWEB)

Bookless, William [Brookhaven National Lab. (BNL), Upton, NY (United States)

2012-12-31

Each year, Brookhaven National Laboratory (BNL) is required to provide a program description and overview of its Laboratory Directed Research and Development Program (LDRD) to the Department of Energy in accordance with DOE Order 413.2B dated April 19, 2006. This report provides a detailed look at the scientific and technical activities for each of the LDRD projects funded by BNL in FY2012, as required. In FY2012, the BNL LDRD Program funded 52 projects, 14 of which were new starts, at a total cost of $10,061,292.

LDRD 2014 Annual Report: Laboratory Directed Research and Development Program Activities

Energy Technology Data Exchange (ETDEWEB)

Hatton, Diane [Brookhaven National Lab. (BNL), Upton, NY (United States)

2015-03-01

Each year, Brookhaven National Laboratory (BNL) is required to provide a program description and overview of its Laboratory Directed Research and Development Program (LDRD) to the Department of Energy (DOE) in accordance with DOE Order 413.2B dated April 19, 2006. This report provides a detailed look at the scientific and technical activities for each of the LDRD projects funded by BNL in FY 2014, as required. In FY 2014, the BNL LDRD Program funded 40 projects, 8 of which were new starts, at a total cost of $9.6M.

LDRD 2015 Annual Report: Laboratory Directed Research and Development Program Activities

Energy Technology Data Exchange (ETDEWEB)

Hatton, D. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2015-12-31

Each year, Brookhaven National Laboratory (BNL) is required to provide a program description and overview of its Laboratory Directed Research and Development Program (LDRD) to the Department of Energy (DOE) in accordance with DOE Order 413.2B dated April 19, 2006. This report provides a detailed look at the scientific and technical activities for each of the LDRD projects funded by BNL in FY 2015, as required. In FY 2015, the BNL LDRD Program funded 43 projects, 12 of which were new starts, at a total cost of $9.5M.

Detailed technical plan for Test Program Element-III (TPE-III) of the first wall/blanket shield engineering test program

Energy Technology Data Exchange (ETDEWEB)

Turner, L.R.; Praeg, W.F.

1982-03-01

The experimental requirements, test-bed design, and computational requirements are reviewed and updated. Next, in Sections 3, 4 and 5, the experimental plan, instrumentation, and computer plan, respectively, are described. Finally, Section 6 treats other considerations, such as personnel, outside participation, and distribution of results.

Detailed technical plan for Test Program Element-III (TPE-III) of the first wall/blanket shield engineering test program

International Nuclear Information System (INIS)

Turner, L.R.; Praeg, W.F.

1982-03-01

The experimental requirements, test-bed design, and computational requirements are reviewed and updated. Next, in Sections 3, 4 and 5, the experimental plan, instrumentation, and computer plan, respectively, are described. Finally, Section 6 treats other considerations, such as personnel, outside participation, and distribution of results

A program of physical activity improves gait impairment in people with Alzheimer's disease

Directory of Open Access Journals (Sweden)

Diego Orcioli-Silva

2018-03-01

Full Text Available Abstract AIM This study aimed to identify the effects of aging and Alzheimer’s disease (AD on gait parameters after a four-month period and to investigate the effects of a four-month program of physical activity, with emphasis on the cognitive components of gait during single and dual task, in people with AD. METHODS Twenty-three people with AD, divided into the Training Group (TG; n=12; aged 79.17±7.62 years and the Control Group (CG; n=11; aged 77.00±5.57 years, and eleven healthy older adults (Healthy Group - HG; aged 75.82±4.83 years were included in this study. TG participated in a physical activity program for four months. The CG and HG were instructed not to participate in any kind of regular physical activity in this period. The physical activity program includes motor activities and cognitive tasks simultaneously. The participants attended a 1-h session three times a week. The kinematic parameters of gait were analyzed under two conditions, before and after a physical activity program: single and dual task. Deltas for all dependent variables between pre and post training were calculated. The deltas were compared using two-way ANOVAs with group (TG x CG and CG x HG and task (single x dual task as factors, with repeated measures for task. RESULTS After the training period, the TG improved stride length, duration, velocity and cadence compared to the CG. CONCLUSION Physical activity with emphasis on cognitive components promotes better reallocation of attention while walking in people with AD, improving attentional focus on the gait and thus resulting in a safer locomotive pattern.

Student Engagement in Research, Scholarship, and Creative Activity (SERSCA) Program: Sharing a Program Model from Design and Development through Evaluation

Science.gov (United States)

Young, Shawna; Uy, Ana; Bell, Joyce

2017-01-01

The Student Engagement in Research, Scholarship, and Creative Activity (SERSCA) Program at California State University, Stanislaus provides support for student engagement in these areas from idea conception through dissemination. Through assistantships, mini-grants, the Student Research Competition, and travel grants, the Program is designed to…

A robot hand testbed designed for enhancing embodiment and functional neurorehabilitation of body schema in subjects with upper limb impairment or loss.

Science.gov (United States)

Hellman, Randall B; Chang, Eric; Tanner, Justin; Helms Tillery, Stephen I; Santos, Veronica J

2015-01-01

Many upper limb amputees experience an incessant, post-amputation "phantom limb pain" and report that their missing limbs feel paralyzed in an uncomfortable posture. One hypothesis is that efferent commands no longer generate expected afferent signals, such as proprioceptive feedback from changes in limb configuration, and that the mismatch of motor commands and visual feedback is interpreted as pain. Non-invasive therapeutic techniques for treating phantom limb pain, such as mirror visual feedback (MVF), rely on visualizations of postural changes. Advances in neural interfaces for artificial sensory feedback now make it possible to combine MVF with a high-tech "rubber hand" illusion, in which subjects develop a sense of embodiment with a fake hand when subjected to congruent visual and somatosensory feedback. We discuss clinical benefits that could arise from the confluence of known concepts such as MVF and the rubber hand illusion, and new technologies such as neural interfaces for sensory feedback and highly sensorized robot hand testbeds, such as the "BairClaw" presented here. Our multi-articulating, anthropomorphic robot testbed can be used to study proprioceptive and tactile sensory stimuli during physical finger-object interactions. Conceived for artificial grasp, manipulation, and haptic exploration, the BairClaw could also be used for future studies on the neurorehabilitation of somatosensory disorders due to upper limb impairment or loss. A remote actuation system enables the modular control of tendon-driven hands. The artificial proprioception system enables direct measurement of joint angles and tendon tensions while temperature, vibration, and skin deformation are provided by a multimodal tactile sensor. The provision of multimodal sensory feedback that is spatiotemporally consistent with commanded actions could lead to benefits such as reduced phantom limb pain, and increased prosthesis use due to improved functionality and reduced cognitive burden.

A robot hand testbed designed for enhancing embodiment and functional neurorehabilitation of body schema in subjects with upper limb impairment or loss

Directory of Open Access Journals (Sweden)

Randall B. Hellman

2015-02-01

Full Text Available Many upper limb amputees experience an incessant, post-amputation phantom limb pain and report that their missing limbs feel paralyzed in an uncomfortable posture. One hypothesis is that efferent commands no longer generate expected afferent signals, such as proprioceptive feedback from changes in limb configuration, and that the mismatch of motor commands and visual feedback is interpreted as pain. Non-invasive therapeutic techniques for treating phantom limb pain, such as mirror visual feedback (MVF, rely on visualizations of postural changes. Advances in neural interfaces for artificial sensory feedback now make it possible to combine MVF with a high-tech rubber hand illusion, in which subjects develop a sense of embodiment with a fake hand when subjected to congruent visual and somatosensory feedback. We discuss clinical benefits that could arise from the confluence of known concepts such as MVF and the rubber hand illusion, and new technologies such as neural interfaces for sensory feedback and highly sensorized robot hand testbeds, such as the BairClaw presented here. Our multi-articulating, anthropomorphic robot testbed can be used to study proprioceptive and tactile sensory stimuli during physical finger-object interactions. Conceived for artificial grasp, manipulation, and haptic exploration, the BairClaw could also be used for future studies on the neurorehabilitation of somatosensory disorders due to upper limb impairment or loss. A remote actuation system enables the modular control of tendon-driven hands. The artificial proprioception system enables direct measurement of joint angles and tendon tensions while temperature, vibration, and skin deformation are provided by a multimodal tactile sensor. The provision of multimodal sensory feedback that is spatiotemporally consistent with commanded actions could lead to benefits such as reduced phantom limb pain, and increased prosthesis use due to improved functionality and reduced

Effectiveness of group-mediated lifestyle physical activity (glpa) program for health benefit in physical activity among elderly people at rural thailand

International Nuclear Information System (INIS)

Ethisan, P.; Chapman, R.

2015-01-01

Elderly population is considered as a vulnerable group and prone to develop multiple medical problems. This aging population is rapidly increasing in developing countries especially in Thailand. Methods: This study was a quasi-experimental study to evaluate the effectiveness of Group-Mediated Lifestyle Physical Activity program on change health benefit in physical activity among elderly people by using validated and reliable Global Physical Activity Questionnaire-GPAQv2. The study was conducted in Phranakhonsiayutthaya district, Ayutthaya province due to its population being the second highest elderly in the Central Region of Thailand. A total of 102 persons of age 60 and over who could read and write Thai language were selected purposively. However, 52 elderly were enrolled in the intervention group and 50 were enrolled for the control group. General Linear Model repeated-measures ANOVA was used to evaluate the effects of Group-Mediated Lifestyle Physical Activity (GLPA) program on change health benefit in physical activity among elderly. Results: Overall health benefit at baseline were similar between intervention and control group and found statistically non-significant with p-value 0.638 (>0.05). However, the mean score of health benefit was 23.21 ± 29.23 in intervention group and 20.74 ± 23.18 in control group. One third of participants of intervention group had not found health benefit due to physical activity while in control group this number was more than half. After elderly received Group-Mediated Lifestyle Physical Activity program intervention for 6 month found significant statistical differences as compared with mean score at baseline (health benefit 6 month, intervention group =40.7 ± 34.28 and control group =4.56 ± 8.79). Conclusion: The effect of Group-Mediated Lifestyle Physical Activity program change intervention was statistically significant in health benefit after intervention program between intervention and control group. Our study

75 FR 76677 - Financial Crimes Enforcement Network: Anti-Money Laundering Program and Suspicious Activity...

Science.gov (United States)

2010-12-09

...: Anti-Money Laundering Program and Suspicious Activity Report Filing Requirements for Residential... loan or finance companies for the purpose of requiring them to establish anti-money laundering programs...-money laundering program requirements on financial institutions.\\3\\ The authority of the Secretary to...

Do Training Programs Work? An Assessment of Pharmacists Activities in the Field of Chemical Dependency.

Science.gov (United States)

Brooks, Valerie G.; Brock, Tina Penick; Ahn, Jungeun

2001-01-01

Seeks to determine if pharmacists who attended a chemical dependency training program were performing more chemical dependency related activities. Results reveal that participants were more likely to perform the following activities: lecture to community groups about chemical dependency; participate in a pharmacists' recovery program; provide…

A Bridge to Active Learning: A Summer Bridge Program Helps Students Maximize Their Active-Learning Experiences and the Active-Learning Experiences of Others

Science.gov (United States)

Cooper, Katelyn M.; Ashley, Michael; Brownell, Sara E.

2017-01-01

National calls to improve student academic success in college have sparked the development of bridge programs designed to help students transition from high school to college. We designed a 2-week Summer Bridge program that taught introductory biology content in an active-learning way. Through a set of exploratory interviews, we unexpectedly…

REP activities of the conference of radiation control program directors

International Nuclear Information System (INIS)

Bevill, B.

1995-01-01

This talk provides an overview of the activities within the Conference of Radiation Control Program Directors associated with Radiological Emergency Preparedness. Included are summaries of interactions with FEMA, with US DOE, with US FDA, and with US DOT

15 CFR 8a.400 - Education programs or activities.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Education programs or activities. 8a.400 Section 8a.400 Commerce and Foreign Trade Office of the Secretary of Commerce NONDISCRIMINATION ON... basis of sex, be excluded from participation in, be denied the benefits of, or be subjected to...

Summary reports of activities under visiting research program (1993)

International Nuclear Information System (INIS)

1993-10-01

The summary reports of activities under visiting research program in the Research Reactor Institute, Kyoto University, in fiscal year 1992 are included. In this report, 104 summaries of researches using the Kyoto University Reactor (KUR) and 9 summaries of the researches using the Kyoto University Critical Assembly (KUCA) are collected. (J.P.N.)

Adopting an Evidence-Based Lifestyle Physical Activity Program: Dissemination Study Design and Methods.

Science.gov (United States)

Dunn, Andrea L; Buller, David B; Dearing, James W; Cutter, Gary; Guerra, Michele; Wilcox, Sara; Bettinghaus, Erwin P

2012-06-01

BACKGROUND: There is a scarcity of research studies that have examined academic-commercial partnerships to disseminate evidence-based physical activity programs. Understanding this approach to dissemination is essential because academic-commercial partnerships are increasingly common. Private companies have used dissemination channels and strategies to a degree that academicians have not, and declining resources require academicians to explore these partnerships. PURPOSE: This paper describes a retrospective case-control study design including the methods, demographics, organizational decision-making, implementation rates, and marketing strategy for Active Living Every Day (ALED), an evidence-based lifestyle physical activity program that has been commercially available since 2001. Evidence-based public health promotion programs rely on organizations and targeted sectors to disseminate these programs although relatively little is known about organizational-level and sector-level influences that lead to their adoption and implementation. METHODS: Cases (n=154) were eligible if they had signed an ALED license agreement with Human Kinetics (HK), publisher of the program's textbooks and facilitator manuals, between 2001 and 2008. Two types of controls were matched (2:2:1) and stratified by sector and region. Active controls (Control 1; n=319) were organizations that contacted HK to consider adopting ALED. Passive controls (Control 2; n=328) were organizations that received unsolicited marketing materials and did not initiate contact with HK. We used Diffusion of Innovations Theory (DIT) constructs as the basis for developing the survey of cases and controls. RESULTS: Using the multi-method strategy recommended by Dillman, a total of n=801 cases and controls were surveyed. Most organizations were from the fitness sector followed by medical, nongovernmental, governmental, educational, worksite and other sectors with significantly higher response rates from government

34 CFR 379.11 - What additional types of project activities may be authorized under this program?

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What additional types of project activities may be... EDUCATION PROJECTS WITH INDUSTRY What Kinds of Activities Does the Department of Education Assist Under This Program? § 379.11 What additional types of project activities may be authorized under this program? The...

Confronting Physical Activity Programming Barriers for People with Disabilities: The Empowerment Model

Science.gov (United States)

Moran, Thomas Eugene; Taliaferro, Andrea R.; Pate, Joshua R.

2014-01-01

Community-based physical activity programs for people with disabilities have barriers that are unique to their program leader qualifications and the population they serve. Moran and Block (2010) argued that there is a need for practical strategies that are easy for communities to implement, maximize resources, and minimize the impact of barriers…

'Physical activity at home (PAAH)', evaluation of a group versus home based physical activity program in community dwelling middle aged adults: rationale and study design.

Science.gov (United States)

Freene, Nicole; Waddington, Gordon; Chesworth, Wendy; Davey, Rachel; Goss, John

2011-11-24

It is well recognised that the adoption and longer term adherence to physical activity by adults to reduce the risk of chronic disease is a challenge. Interventions, such as group and home based physical activity programs, have been widely reported upon. However few studies have directly compared these interventions over the longer term to determine their adherence and effectiveness. Participant preference for home based or group interventions is important. Some evidence suggests that home based physical activity programs are preferred by middle aged adults and provide better long term physical activity adherence. Physiotherapists may also be useful in increasing physical activity adherence, with limited research on their impact. 'Physical Activity at Home' is a 2 year pragmatic randomised control trial, with a non-randomised comparison to group exercise. Middle-aged adults not interested in, or unable to attend, a group exercise program will be targeted. Sedentary community dwelling 50-65 year olds with no serious medical conditions or functional impairments will be recruited via two mail outs using the Australian federal electoral roll. The first mail out will invite participants to a 6 month community group exercise program. The second mail out will be sent to those not interested in the group exercise program inviting them to take part in a home based intervention. Eligible home based participants will be randomised into a 6 month physiotherapy-led home based physical activity program or usual care. Outcome measures will be taken at baseline, 6, 12, 18 and 24 months. The primary outcome is physical activity adherence via exercise diaries. Secondary outcomes include the Active Australia Survey, accelerometry, aerobic capacity (step test), quality of life (SF-12v2), blood pressure, waist circumference, waist-to-hip ratio and body mass index. Costs will be recorded prospectively and qualitative data will be collected. The planned 18 month follow-up post

Current activities handbook: formerly utilized sites remedial action program

International Nuclear Information System (INIS)

1981-01-01

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the activities each of the thirteen state legislatures potentially affected by the Formerly Utilized Sites Remedial Action Program. It contains a description of the state legislative procedural rules and a schedule of each legislative session; a summary of pending relevant legislation; the name and telephone number of legislative and state agency contacts; and the full text of all bills identified

Current activities handbook: formerly utilized sites remedial action program

Energy Technology Data Exchange (ETDEWEB)

None

1981-02-27

This volume is one of a series produced under contract with the DOE, by Politech Corporation to develop a legislative and regulatory data base to assist the FUSRAP management in addressing the institutional and socioeconomic issues involved in carrying out the Formerly Utilized Sites Remedial Action Program. This Information Handbook series contains information about all relevant government agencies at the Federal and state levels, the pertinent programs they administer, each affected state legislature, and current Federal and state legislative and regulatory initiatives. This volume is a compilation of information about the activities each of the thirteen state legislatures potentially affected by the Formerly Utilized Sites Remedial Action Program. It contains a description of the state legislative procedural rules and a schedule of each legislative session; a summary of pending relevant legislation; the name and telephone number of legislative and state agency contacts; and the full text of all bills identified.

DATA Act File B Object Class and Program Activity - Social Security

Data.gov (United States)

Social Security Administration — The DATA Act Information Model Schema Reporting Submission Specification File B. File B includes the agency object class and program activity detail obligation and...

The Transuranic Waste Program's integration and planning activities and the contributions of the TRU partnership

International Nuclear Information System (INIS)

Harms, T.C.; O'Neal, W.; Petersen, C.A.; McDonald, C.E.

1994-02-01

The Technical Support Division, EM-351 manages the integration and planning activities of the Transuranic Waste Program. The Transuranic Waste Program manager provides transuranic waste policy, guidance, and issue resolution to Headquarters and the Operations Offices. In addition, the program manager is responsible for developing and implementing an integrated, long-range waste management plan for the transuranic waste system. A steering committee, a core group of support contractors, and numerous interface working groups support the efforts of the program manager. This paper provides an overview of the US Department of Energy's transuranic waste integration activities and a long-range planning process that includes internal and external stakeholder participation. It discusses the contributions and benefits provided by the Transuranic Partnership, most significantly, the integration activities and the body of data collected and assembled by the Partnership

Assessing participation in community-based physical activity programs in Brazil.

Science.gov (United States)

Reis, Rodrigo S; Yan, Yan; Parra, Diana C; Brownson, Ross C

2014-01-01

This study aimed to develop and validate a risk prediction model to examine the characteristics that are associated with participation in community-based physical activity programs in Brazil. We used pooled data from three surveys conducted from 2007 to 2009 in state capitals of Brazil with 6166 adults. A risk prediction model was built considering program participation as an outcome. The predictive accuracy of the model was quantified through discrimination (C statistic) and calibration (Brier score) properties. Bootstrapping methods were used to validate the predictive accuracy of the final model. The final model showed sex (women: odds ratio [OR] = 3.18, 95% confidence interval [CI] = 2.14-4.71), having less than high school degree (OR = 1.71, 95% CI = 1.16-2.53), reporting a good health (OR = 1.58, 95% CI = 1.02-2.24) or very good/excellent health (OR = 1.62, 95% CI = 1.05-2.51), having any comorbidity (OR = 1.74, 95% CI = 1.26-2.39), and perceiving the environment as safe to walk at night (OR = 1.59, 95% CI = 1.18-2.15) as predictors of participation in physical activity programs. Accuracy indices were adequate (C index = 0.778, Brier score = 0.031) and similar to those obtained from bootstrapping (C index = 0.792, Brier score = 0.030). Sociodemographic and health characteristics as well as perceptions of the environment are strong predictors of participation in community-based programs in selected cities of Brazil.