Process and device for producing a timber gear case for tunnels and mines

Energy Technology Data Exchange (ETDEWEB)

Foik, A

1977-09-08

A device is described for producing a timber gear case for tunnels and mines. Plank shaped pillars, partly overlapping one another are driven in parallel planes at an angle to the tunnel axis, close together and advancing relative to the face. The pillars are taken through supports erected one after the other in the longitudinal direction of the tunnel, and are supported. The process can be extended by producing a timber gear case to secure any type of underground space. The process produces further mechanisation of tunnelling and mining and also ensures greater safety for the miners.

Casing pull tests for directionally drilled environmental wells

International Nuclear Information System (INIS)

Staller, G.E.; Wemple, R.P.; Layne, R.R.

1994-11-01

A series of tests to evaluate several types of environmental well casings have been conducted by Sandia National Laboratories (SNL) and it's industrial partner, The Charles Machine Works, Inc. (CMW). A test bed was constructed at the CMW test range to model a typical shallow, horizontal, directionally drilled wellbore. Four different types of casings were pulled through this test bed. The loads required to pull the casings through the test bed and the condition of the casing material were documented during the pulling operations. An additional test was conducted to make a comparison of test bed vs actual wellbore casing pull loads. A directionally drilled well was emplaced by CMW to closely match the test bed. An instrumented casing was installed in the well and the pull loads recorded. The completed tests are reviewed and the results reported

Casing pull tests for directionally drilled environmental wells

Energy Technology Data Exchange (ETDEWEB)

Staller, G.E.; Wemple, R.P. [Sandia National Labs., Albuquerque, NM (United States); Layne, R.R. [Charles Machine Works, Inc., Perry, OK (United States)

1994-11-01

A series of tests to evaluate several types of environmental well casings have been conducted by Sandia National Laboratories (SNL) and it`s industrial partner, The Charles Machine Works, Inc. (CMW). A test bed was constructed at the CMW test range to model a typical shallow, horizontal, directionally drilled wellbore. Four different types of casings were pulled through this test bed. The loads required to pull the casings through the test bed and the condition of the casing material were documented during the pulling operations. An additional test was conducted to make a comparison of test bed vs actual wellbore casing pull loads. A directionally drilled well was emplaced by CMW to closely match the test bed. An instrumented casing was installed in the well and the pull loads recorded. The completed tests are reviewed and the results reported.

Irritant and allergenic potential of some latex producing Indian plants

Directory of Open Access Journals (Sweden)

J S Pasricha

1990-01-01

Full Text Available The iatex exuding from the freshly sliced stems/leaves of 11 Indian plants was tested on 10 volunteers each by the open patch test and in 5 volunteers each by the 48 hour occluded patch test technique. In the open patch test, there was no reaction with (1 calotropis procera, (2 Alstonia scholaris,(3 Euphorbia splendens, (4 Euphorbia clarkina (5 Nerium indicum, and (6 Padilanthus tithymaloides (Green and white leaf variety, while mild reactions were observed with Euphorbia pulcherrima in 3 volunteers, Ficus elastida in 2 volunteers, and Pedilanthus tithymaloidas (Green leaf variety and Plumeria indica in one volunteer each Sapium sebiferum on the other hand produced severe itching, burning and erythema in all the 10 volunteers. The 48 hour occluded patch test produced definite reactions with Pedilanthus tithymaloides (Green leaf varietyin 2 cases and calotropis procera and Euphorbia clarkina in 1 case each. Sapium sebiferum on the other hand produced cauterization type of reactions in all the cases.

Automating Test Activities: Test Cases Creation, Test Execution, and Test Reporting with Multiple Test Automation Tools

OpenAIRE

Loke Mun Sei

2015-01-01

Software testing has become a mandatory process in assuring the software product quality. Hence, test management is needed in order to manage the test activities conducted in the software test life cycle. This paper discusses on the challenges faced in the software test life cycle, and how the test processes and test activities, mainly on test cases creation, test execution, and test reporting is being managed and automated using several test automation tools, i.e. Jira, ...

Worldwide dispersion and deposition of radionuclides produced in atmospheric tests.

Science.gov (United States)

Bennett, Burton G

2002-05-01

Radionuclides produced in atmospheric nuclear tests were widely dispersed in the global environment. From the many measurements of the concentrations in air and the deposition amounts, much was learned of atmospheric circulation and environmental processes. Based on these results and the reported fission and total yields of individual tests, it has been possible to devise an empirical model of the movement and residence times of particles in the various atmospheric regions. This model, applied to all atmospheric weapons tests, allows extensive calculations of air concentrations and deposition amounts for the entire range of radionuclides produced throughout the testing period. Especially for the shorter-lived fission radionuclides, for which measurement results at the time of the tests are less extensive, a more complete picture of levels and isotope ratios can be obtained, forming a basis for improved dose estimations. The contributions to worldwide fallout can be inferred from individual tests, from tests at specific sites, or by specific countries. Progress was also made in understanding the global hydrological and carbon cycles from the tritium and 14C measurements. A review of the global measurements and modeling results is presented in this paper. In the future, if injections of materials into the atmosphere occur, their anticipated motions and fates can be predicted from the knowledge gained from the fallout experience.

Active case finding for carbapenemase-producing Enterobacteriaceae in a teaching hospital: prevalence and risk factors for colonization.

Science.gov (United States)

Poole, K; George, R; Decraene, V; Shankar, K; Cawthorne, J; Savage, N; Welfare, W; Dodgson, A

2016-10-01

Over the past decade, the prevalence of carbapenemase-producing Enterobacteriaceae (CPE) has increased. Whilst basic infection prevention and control practices reduce the risk of transmission, cases of unrecognized carriage pose a potential risk of transmission. To estimate the prevalence of CPE and explore risk factors associated with colonization within a large teaching hospital with an established CPE outbreak. All inpatients that had not previously tested positive for CPE were offered testing. Demographic and hospital episode data were also collected, together with antibiotic and proton pump inhibitor (PPI) use in the preceding 24h. This study identified 70 CPE-positive cases (26 newly identified and 44 previously known) and 592 CPE-negative cases, giving a combined prevalence of 11% [95% confidence interval (CI) 8-13]. Medication (antibiotic and PPI use), previous admission, ethnicity and length of stay were assessed as risk factors for colonization, and none were found to be independently associated with CPE colonization. Using logistic regression, age [odds ratio (OR) 1.03, 95% CI 1.01-1.07] and antibiotic use (OR 2.55, 95% CI 1.08-6.03) were the only risk factors significantly associated with CPE colonization. This study has added to the evidence base by estimating the prevalence of CPE among inpatients in an acute hospital with an established CPE outbreak. A case-finding exercise was feasible and identified a number of new cases. Despite a small sample size, increasing age and prescription of an antibiotic on the day of testing were significantly associated with CPE colonization. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Time-Optimal Real-Time Test Case Generation using UPPAAL

DEFF Research Database (Denmark)

Hessel, Anders; Larsen, Kim Guldstrand; Nielsen, Brian

2004-01-01

Testing is the primary software validation technique used by industry today, but remains ad hoc, error prone, and very expensive. A promising improvement is to automatically generate test cases from formal models of the system under test. We demonstrate how to automatically generate real...... test purposes or generated automatically from various coverage criteria of the model.......-time conformance test cases from timed automata specifications. Specifically we demonstrate how to fficiently generate real-time test cases with optimal execution time i.e test cases that are the fastest possible to execute. Our technique allows time optimal test cases to be generated using manually formulated...

Test case for a near-surface repository

International Nuclear Information System (INIS)

Elert, M.; Jones, C.; Nilsson, L.B.; Skagius, K.; Wiborgh, M.

1998-01-01

A test case is presented for assessment of a near-surface disposal facility for radioactive waste. The case includes waste characterization and repository design, requirements and constraints in an assessment context, scenario development, model description and test calculations

Test case preparation using a prototype

OpenAIRE

Treharne, Helen; Draper, J.; Schneider, Steve A.

1998-01-01

This paper reports on the preparation of test cases using a prototype within the context of a formal development. It describes an approach to building a prototype using an example. It discusses how a prototype contributes to the testing activity as part of a lifecycle based on the use of formal methods. The results of applying the approach to an embedded avionics case study are also presented.

Test case for a near-surface repository

Energy Technology Data Exchange (ETDEWEB)

Elert, M.; Jones, C. [Kemakta Konsult AB, Stockholm (Sweden); Nilsson, L.B. [Swedish Nuclear Fuel and Waste Co, Stockholm (Sweden); Skagius, K.; Wiborgh, M. [Kemakta Konsult AB, Stockholm (Sweden)

1998-09-01

A test case is presented for assessment of a near-surface disposal facility for radioactive waste. The case includes waste characterization and repository design, requirements and constraints in an assessment context, scenario development, model description and test calculations 6 refs, 12 tabs, 16 figs

A case of alpha-fetoprotein-producing esophageal adenocarcinoma.

Science.gov (United States)

Chen, Yi-Yu; Hsu, Wen-Hung; Hu, Huang-Ming; Wu, Deng-Chyang; Lin, Wen-Yi

2013-02-01

Alpha-fetoprotein is a well-known tumor marker in the screening and follow-up of hepatocellular carcinoma. In Taiwanese society, a high prevalence of hepatitis and hepatoma and elevation of alpha-fetoprotein associated with liver function impairment usually suggested clinics undertake further examination for liver or genital tumor. We report the case of 45-year-old man who was found to have an alpha-fetoprotein-producing esophageal adenocarcinoma with an initial presentation of liver function impairment and rapid elevation of alpha-fetoprotein. Esophageal cancer was diagnosed via endoscope and a biopsy proved the presence of adenocarcinoma. A small endoscopic biopsy specimen failed to identify the alpha-fetoprotein positive tumor cell. Esophagectomy was performed and histopathological study of surgical specimen revealed grade II adenocarcinoma with regional metastatic lymphadenopathy. Immunohistochemical study was focal positive for alpha-fetoprotein. Serum alpha-fetoprotein declined transiently after esophagectomy and fluctuation of alpha-fetoprotein level was noted during the treatment with adjuvant chemotherapy. Finally, 19 months after the operation, the patient died due to multiple organ metastases with multiple organ failure. Thus, a small specimen for upper endoscopy may not be sufficient in the presence of alpha-fetoprotein-producing adenocarcinoma. Monitoring of serum alpha-fetoprotein may be useful in the evaluation and follow-up of esophageal alpha-fetoprotein-producing adenocarcinoma. Copyright © 2012. Published by Elsevier B.V.

Measuring Test Case Similarity to Support Test Suite Understanding

NARCIS (Netherlands)

Greiler, M.S.; Van Deursen, A.; Zaidman, A.E.

2012-01-01

Preprint of paper published in: TOOLS 2012 - Proceedings of the 50th International Conference, Prague, Czech Republic, May 29-31, 2012; doi:10.1007/978-3-642-30561-0_8 In order to support test suite understanding, we investigate whether we can automatically derive relations between test cases. In

Validation test case generation based on safety analysis ontology

International Nuclear Information System (INIS)

Fan, Chin-Feng; Wang, Wen-Shing

2012-01-01

Highlights: ► Current practice in validation test case generation for nuclear system is mainly ad hoc. ► This study designs a systematic approach to generate validation test cases from a Safety Analysis Report. ► It is based on a domain-specific ontology. ► Test coverage criteria have been defined and satisfied. ► A computerized toolset has been implemented to assist the proposed approach. - Abstract: Validation tests in the current nuclear industry practice are typically performed in an ad hoc fashion. This study presents a systematic and objective method of generating validation test cases from a Safety Analysis Report (SAR). A domain-specific ontology was designed and used to mark up a SAR; relevant information was then extracted from the marked-up document for use in automatically generating validation test cases that satisfy the proposed test coverage criteria; namely, single parameter coverage, use case coverage, abnormal condition coverage, and scenario coverage. The novelty of this technique is its systematic rather than ad hoc test case generation from a SAR to achieve high test coverage.

The Couplex test cases: models and lessons

International Nuclear Information System (INIS)

Bourgeat, A.; Kern, M.; Schumacher, S.; Talandier, J.

2003-01-01

The Couplex test cases are a set of numerical test models for nuclear waste deep geological disposal simulation. They are centered around the numerical issues arising in the near and far field transport simulation. They were used in an international contest, and are now becoming a reference in the field. We present the models used in these test cases, and show sample results from the award winning teams. (authors)

Test case prioritization using Cuscuta search

Directory of Open Access Journals (Sweden)

Mukesh Mann

2014-12-01

Full Text Available Most companies are under heavy time and resource constraints when it comes to testing a software system. Test prioritization technique(s allows the most useful tests to be executed first, exposing faults earlier in the testing process. Thus makes software testing more efficient and cost effective by covering maximum faults in minimum time. But test case prioritization is not an easy and straightforward process and it requires huge efforts and time. Number of approaches is available with their proclaimed advantages and limitations, but accessibility of any one of them is a subject dependent. In this paper, artificial Cuscuta search algorithm (CSA inspired by real Cuscuta parasitism is used to solve time constraint prioritization problem. We have applied CSA for prioritizing test cases in an order of maximum fault coverage with minimum test suite execution and compare its effectiveness with different prioritization ordering. Taking into account the experimental results, we conclude that (i The average percentage of faults detection (APFD is 82.5% using our proposed CSA ordering which is equal to the APFD of optimal and ant colony based ordering whereas No ordering, Random ordering and Reverse ordering has 76.25%, 75%, 68.75% of APFD respectively.

Test Automation Process Improvement A case study of BroadSoft

OpenAIRE

Gummadi, Jalendar

2016-01-01

This master thesis research is about improvement of test automation process at BroadSoft Finland as a case study. Test automation project recently started at BroadSoft but the project is not properly integrated in to existing process. Project is about converting manual test cases to automation test cases. The aim of this thesis is about studying existing BroadSoft test process and studying different test automation frameworks. In this thesis different test automation process are studied ...

HYBRID DATA APPROACH FOR SELECTING EFFECTIVE TEST CASES DURING THE REGRESSION TESTING

OpenAIRE

Mohan, M.; Shrimali, Tarun

2017-01-01

In the software industry, software testing becomes more important in the entire software development life cycle. Software testing is one of the fundamental components of software quality assurances. Software Testing Life Cycle (STLC)is a process involved in testing the complete software, which includes Regression Testing, Unit Testing, Smoke Testing, Integration Testing, Interface Testing, System Testing & etc. In the STLC of Regression testing, test case selection is one of the most importan...

The International intraval project. Phase 1 test cases

International Nuclear Information System (INIS)

1992-01-01

This report contains a description of the test cases adopted in Phase 1 of the international cooperation project INTRAVAL. Seventeen test cases based on bench-scale experiments in laboratory, field tests and natural analogue studies, have been included in the study. The test cases are described in terms of experimental design and types of available data. In addition, some quantitative examples of available data are given as well as references to more extensive documentation of the experiments on which the test cases are based. Fithteen test cases examples are given: 1 Mass transfer through clay by diffusion and advection. 2 Uranium migration in crystalline bore cores, small scale pressure infiltration experiments. 3 Radionuclide migration in single natural fractures in granite. 4 Tracer tests in a deep basalt flow top. 5 Flow and tracer experiment in crystalline rock based on the Stripa 3-D experiment. 6 Tracer experiment in a fracture zone at the Finnsjon research area. 7 Synthetic data base, based on single fracture migration experiments in Grimsel rock laboratory. 8 Natural analogue studies at Pocos de Caldas, Minais Gerais, Brazil. Redox-front and radionuclide movement in an open pit uranium mine. 9 Natural analogue studies at the Koongarra site in the Alligator Rivers area of the Northern Territory, Australia. 10 Large block migration experiments in a block of crystalline rock. 11 Unsaturated flow and transport experiments performed at Las Cruces, New Mexico. 12 Flow and transport experiment in unsaturated fractured rock performed at the Apache Leap Tuff site, Arizona. 13 Experiments in partially saturated tuffaceous rocks performed in the G-tunnel underground facility at the Nevada Test site, USA. 14 Experimental study of brine transport in porous media. 15 Groundwater flow in the vicinity of the Gorleben Salt Dome, Federal Republic of Germany

Syringe test screening of microbial gas production activity: Cases denitrification and biogas formation.

Science.gov (United States)

Østgaard, Kjetill; Kowarz, Viktoria; Shuai, Wang; Henry, Ingrid A; Sposob, Michal; Haugen, Hildegunn Hegna; Bakke, Rune

2017-01-01

Mass produced plastic syringes may be applied as vessels for cheap, simple and large scale batch culture testing. As illustrated for the cases of denitrification and of biogas formation, metabolic activity was monitored by direct reading of the piston movement due to the gas volume formed. Pressure buildup due to friction was shown to be moderate. A piston pull and slide back routine can be applied before recording gas volume to minimize experimental errors due to friction. Inoculum handling and activity may be conveniently standardized as illustrated by applying biofilm carriers. A robust set of positive as well as negative controls ("blanks") should be included to ensure quality of the actual testing. The denitrification test showed saturation response at increasing amounts of inoculum in the form of adapted moving bed biofilm reactor (MBBR) carriers, with well correlated nitrate consumption vs. gas volume formed. As shown, the denitrification test efficiently screened different inocula at standardized substrates. Also, different substrates were successfully screened and compared at standardized inocula. The biogas potential test showed efficient screening of different substrates with effects of relative amounts of carbohydrate, protein, fat. A second case with CO 2 capture reclaimer waste as substrate demonstrated successful use of co-feeding to support waste treatment and how temperature effects on kinetics and stoichiometry can be observed. In total, syringe test screening of microbial gas production seems highly efficient at a low cost when properly applied. Copyright © 2016 Elsevier B.V. All rights reserved.

Case studies in ultrasonic testing

International Nuclear Information System (INIS)

Prasad, V.; Satheesh, C.; Varde, P.V.

2015-01-01

Ultrasonic testing is widely used Non Destructive Testing (NDT) method and forms the essential part of In-service inspection programme of nuclear reactors. Main application of ultrasonic testing is for volumetric scanning of weld joints followed by thickness gauging of pipelines and pressure vessels. Research reactor Dhruva has completed the first In Service Inspection programme in which about 325 weld joints have been volumetrically scanned, in addition to thickness gauging of 300 meters of pipe lines of various sizes and about 24 nos of pressure vessels. Ultrasonic testing is also used for level measurements, distance measurements and cleaning and decontamination of tools. Two case studies are brought out in this paper in which ultrasonic testing is used successfully for identification of butterfly valve opening status and extent of choking in pipe lines in Dhruva reactor systems

Theory Testing Using Case Studies

DEFF Research Database (Denmark)

Sørensen, Pernille Dissing; Løkke, Ann-Kristina

2006-01-01

design. Finally, we discuss the epistemological logic, i.e., the value to larger research programmes, of such studies and, following Lakatos, conclude that the value of theory-testing case studies lies beyond naïve falsification and in their contribution to developing research programmes in a progressive...

Neurorehabilitation in stroke produced by vertebral artery dissection: case presentation

Directory of Open Access Journals (Sweden)

Stanescu Ioana

2018-02-01

Full Text Available Arterial dissections are a common cause of stroke in the young (mean age 44 to 46 years. Primary lesion is a tear of the arterial intima, which promotes platelet aggregation, thrombus formation, which further produced vessel stenosis / occlusion, distal embolism or vessel wall rupture. Vertebral artery (VA dissection appear most commonly in extracranial segments V2 and V3, and could be spontaneous (with underlying predispositions or triggered by various traumatisms. Clinicaly, VA dissection produces an ischemic stroke or transient ischemic attack , preceded by local symptoms such as neck pain or headache. The diagnosis is confirmed by neurovascular imaging. Treatment of symptomatic VA dissections respect indications of treatment in ischemic strokes. Prognosis is mostly favorable in extracranial dissections. We present the case of a left VA dissection in V2 segment, produced by physical effort (swimming, which causes 2 ischemic lesions, one in the territory of the left posterior cerebral artery and the other in the territory of the left posterolateral chorroidal artery. Patient’s treatment included antiplatelet agents, statines, and an adapted physical rehabilitation program. At three months he showed significant clinical improvement with regain of autonomy and partial recanalisation at angio-MRI of the V2 segment of the dissected artery.

Empirical Test Case Specification

DEFF Research Database (Denmark)

Kalyanova, Olena; Heiselberg, Per

This document includes the empirical specification on the IEA task of evaluation building energy simulation computer programs for the Double Skin Facades (DSF) constructions. There are two approaches involved into this procedure, one is the comparative approach and another is the empirical one. I....... In the comparative approach the outcomes of different software tools are compared, while in the empirical approach the modelling results are compared with the results of experimental test cases....

Analysis of the imbalance price scheme in the Spanish electricity market: A wind power test case

International Nuclear Information System (INIS)

Bueno-Lorenzo, Miriam; Moreno, M. Ángeles; Usaola, Julio

2013-01-01

This work investigates the interaction between wind power and electricity markets. The paper is focused on balancing markets pricing policies. The proposal of a new imbalance price scheme is included and conveniently evaluated. This proposed scheme tries to minimise the use of ancillary services to compensate for deviations in searching for a more efficient market design. The effectiveness of imbalance prices as market signals is also examined, and policy recommendations regarding imbalance services are discussed. Two test cases are included that analyse the participation of a wind power producer in the Spanish electricity market using a stochastic optimisation strategy. For this purpose, the uncertainty of the variables is considered, i.e., wind power production and prediction, intraday and imbalance prices. Test cases were run with real data for 10 months, and realistic results are presented along with a hypothetical test case. The regulation of the imbalance prices may not be adequate for the Spanish electricity market because an error drop is not sufficiently encouraged. Therefore, we suggest the application of a new imbalance price scheme, which includes an additional constraint. The conclusions of this paper can be assumed to be general policy recommendations

Pre-examination factors affecting molecular diagnostic test results and interpretation: A case-based approach.

Science.gov (United States)

Payne, Deborah A; Baluchova, Katarina; Peoc'h, Katell H; van Schaik, Ron H N; Chan, K C Allen; Maekawa, Masato; Mamotte, Cyril; Russomando, Graciela; Rousseau, François; Ahmad-Nejad, Parviz

2017-04-01

Multiple organizations produce guidance documents that provide opportunities to harmonize quality practices for diagnostic testing. The International Organization for Standardization ISO 15189 standard addresses requirements for quality in management and technical aspects of the clinical laboratory. One technical aspect addresses the complexities of the pre-examination phase prior to diagnostic testing. The Committee for Molecular Diagnostics of the International Federation for Clinical Chemistry and Laboratory Medicine (also known as, IFCC C-MD) conducted a survey of international molecular laboratories and determined ISO 15189 to be the most referenced guidance document. In this review, the IFCC C-MD provides case-based examples illustrating the value of select pre-examination processes as these processes relate to molecular diagnostic testing. Case-based examples in infectious disease, oncology, inherited disease and pharmacogenomics address the utility of: 1) providing information to patients and users, 2) designing requisition forms, 3) obtaining informed consent and 4) maintaining sample integrity prior to testing. The pre-examination phase requires extensive and consistent communication between the laboratory, the healthcare provider and the end user. The clinical vignettes presented in this paper illustrate the value of applying select ISO 15189 recommendations for general laboratory to the more specialized area of Molecular Diagnostics. Copyright © 2016 Elsevier B.V. All rights reserved.

Evaluation of simulated-LOCA tests that produced large fuel cladding ballooning

International Nuclear Information System (INIS)

Powers, D.A.; Meyer, R.O.

1979-02-01

A description is given of the NRC review and evaluation of simulated-LOCA tests that produced large axially extended ballooing in Zircaloy fuel cladding. Technical summaries are presented on the likelihood of the transient that was used in the tests, the effects of temperature variations on strain localization, and the results of other similar experiments. It is concluded that (a) the large axially extended deformations were an artifact of the experimental technique, (b) current NRC licensing positions are not invalidated by this new information, and (c) no new research programs are needed to study this phenomenon

Herbalife hepatotoxicity: Evaluation of cases with positive reexposure tests.

Science.gov (United States)

Teschke, Rolf; Frenzel, Christian; Schulze, Johannes; Schwarzenboeck, Alexander; Eickhoff, Axel

2013-07-27

To analyze the validity of applied test criteria and causality assessment methods in assumed Herbalife hepatotoxicity with positive reexposure tests. We searched the Medline database for suspected cases of Herbalife hepatotoxicity and retrieved 53 cases including eight cases with a positive unintentional reexposure and a high causality level for Herbalife. First, analysis of these eight cases focused on the data quality of the positive reexposure cases, requiring a baseline value of alanine aminotransferase (ALT) Herbalife in these eight cases were probable (n = 1), unlikely (n = 4), and excluded (n = 3). Confounding variables included low data quality, alternative diagnoses, poor exclusion of important other causes, and comedication by drugs and herbs in 6/8 cases. More specifically, problems were evident in some cases regarding temporal association, daily doses, exact start and end dates of product use, actual data of laboratory parameters such as ALT, and exact dechallenge characteristics. Shortcomings included scattered exclusion of hepatitis A-C, cytomegalovirus and Epstein Barr virus infection with only globally presented or lacking parameters. Hepatitis E virus infection was considered in one single patient and found positive, infections by herpes simplex virus and varicella zoster virus were excluded in none. Only one case fulfilled positive reexposure test criteria in initially assumed Herbalife hepatotoxicity, with lower CIOMS based causality gradings for the other cases than hitherto proposed.

Thyrotropin-producing adenoma. Report of two clinical cases

Directory of Open Access Journals (Sweden)

Ani R. Karapetyan

2017-03-01

Full Text Available Diagnosis of hyperthyroidism does not present serious difficulties currently. Distribution of imaging techniques increasing the detection of pituitary adenomas every year. Thyrotropin-producing adenoma is a rare cause of hyperthyroidism. Early detection will alert its errors in treatment strategy, unjustified surgery on the thyroid gland, and will improve the quality of patients life. The article presents two clinical cases of thyroid-stimulating hormone (TSH-secreting pituitary adenomas in patients with different disease duration, and thus the presence of hyperthyroidism complications. Both patients were operated in the Federal Center of Neurosurgery Novosibirsk by transnasal transsphenoidal approach. The resistant euthyroidism was reached postoperatively, but in patients with long-term history of the disease, large size of adenoma in the postoperative period developed secondary adrenal insufficiency and her quality of life is significantly lower, taking into account comorbidities. The period of follow-up consists 3 years and one year respectively.

Turbine-missile casing exit tests

International Nuclear Information System (INIS)

Yoshimura, H.R.; Sliter, G.E.

1978-01-01

Nuclear power plant designers are required to provide safety-related components with adequate protection against hypothetical turbine-missile impacts. In plants with a ''peninsula'' arrangement, protection is provided by installing the turbine axis radially from the reactor building, so that potential missile trajectories are not in line with the plant. In plants with a ''non-peninsula'' arrangement (turbine axis perpendicular to a radius), designers rely on the low probability of a missile strike and on the protection provided by reinforced concrete walls in order to demonstrate an adequate level of protection USNRC Regulatory Guide 1.115). One of the critical first steps in demonstrating adequacy is the determination of the energy and spin of the turbine segments as they exit the turbine casing. The spin increases the probability that a subsequent impact with a protective barrier will be off-normal and therefore less severe than the normal impact assumed in plant designs. Two full-scale turbine-missile casing exit tests which were conducted by Sandia Laboratories at their rocket-sled facility in Albuquerque, New Mexico, are described. Because of wide variations in turbine design details, postulated failure conditions, and missile exit scenarios, the conditions for the two tests were carefully selected to be as prototypical as possible, while still maintaining the well-controlled and well-characterized test conditions needed for generating benchmark data

Characterization of Ceramic Material Produced From a Cold Crucible Induction Melter Test

Energy Technology Data Exchange (ETDEWEB)

Amoroso, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Marra, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-04-30

This report summarizes the results from characterization of samples from a melt processed surrogate ceramic waste form. Completed in October of 2014, the first scaled proof of principle cold crucible induction melter (CCIM) test was conducted to process a Fe-hollandite-rich titanate ceramic for treatment of high level nuclear waste. X-ray diffraction, electron microscopy, inductively coupled plasma-atomic emission spectroscopy (and inductively coupled plasma-mass spectroscopy for Cs), and product consistency tests were used to characterize the CCIM material produced. Core samples at various radial locations from the center of the CCIM were taken. These samples were also sectioned and analyzed vertically. Together, the various samples were intended to provide an indication of the homogeneity throughout the CCIM with respect to phase assemblage, chemical composition, and chemical durability. Characterization analyses confirmed that a crystalline ceramic with desirable phase assemblage was produced from a melt using a CCIM. Hollandite and zirconolite were identified in addition to possible highly-substituted pyrochlore and perovskite. Minor phases rich in Fe, Al, or Cs were also identified. Remarkably only minor differences were observed vertically or radially in the CCIM material with respect to chemical composition, phase assemblage, and durability. This recent CCIM test and the resulting characterization in conjunction with demonstrated compositional improvements support continuation of CCIM testing with an improved feed composition and improved melter system.

Field Validation of Toxicity Tests to Evaluate the Potential for Beneficial Use of Produced Water

Energy Technology Data Exchange (ETDEWEB)

Joseph Bidwell; Jonathan Fisher; Naomi Cooper

2008-03-31

This study investigated potential biological effects of produced water contamination derived from occasional surface overflow and possible subsurface intrusion at an oil production site along the shore of Skiatook Lake, Oklahoma. We monitored basic chemistry and acute toxicity to a suite of standard aquatic test species (fathead minnow-Pimephales promelas, Daphnia pulex, Daphnia magna, and Ceriodaphnia dubia) in produced water and in samples taken from shallow groundwater wells on the site. Toxicity identification evaluations and ion toxicity modeling were used to identify toxic constituents in the samples. Lake sediment at the oil production site and at a reference site were also analyzed for brine intrusion chemically and by testing sediment toxicity using the benthic invertebrates, Chironomus dilutus, and Hyallela azteca. Sediment quality was also assessed with in situ survival and growth studies with H. azteca and the Asian clam, Corbicula fluminea, and by benthic macroinvertebrate community sampling. The produced water was acutely toxic to the aquatic test organisms at concentrations ranging from 1% to 10% of the whole produced water sample. Toxicity identification evaluation and ion toxicity modeling indicated major ion salts and hydrocarbons were the primary mixture toxicants. The standardized test species used in the laboratory bioassays exhibited differences in sensitivity to these two general classes of contaminants, which underscores the importance of using multiple species when evaluating produced water toxicity. Toxicity of groundwater was greater in samples from wells near a produced water injection well and an evaporation pond. Principle component analyses (PCA) of chemical data derived from the groundwater wells indicated dilution by lake water and possible biogeochemical reactions as factors that ameliorated groundwater toxicity. Elevated concentrations of major ions were found in pore water from lake sediments, but toxicity from these ions was

GENERATING TEST CASES FOR PLATFORM INDEPENDENT MODEL BY USING USE CASE MODEL

OpenAIRE

Hesham A. Hassan,; Zahraa. E. Yousif

2010-01-01

Model-based testing refers to testing and test case generation based on a model that describes the behavior of the system. Extensive use of models throughout all the phases of software development starting from the requirement engineering phase has led to increased importance of Model Based Testing. The OMG initiative MDA has revolutionized the way models would be used for software development. Ensuring that all user requirements are addressed in system design and the design is getting suffic...

Alpha-fetoprotein-producing Gastric Cancer with Metastasis to the Scrotum: Case Report

International Nuclear Information System (INIS)

Cho, Young Joon; Chung, Jae Joon; Yu, Jeong Sik; Kim, Joo Hee; Kim, Dae Jung; Ahn, Jhii Hyun; Cho, Eun Suk

2010-01-01

An alpha-fetoprotein-producing gastric cancer is rare, making up only about 3% of all gastric cancers. Further, gastric cancer with metastasis to the scrotum via a transperitoneal route is extremely rare. We report a case of metastatic scrotal mass in a 68-year-old man who had undergone a subtotal gastrectomy and gastroduodenostomy due to signet ring cell type gastric cancer with a description focusing on the radiologic findings

Alpha-fetoprotein-producing Gastric Cancer with Metastasis to the Scrotum: Case Report

Energy Technology Data Exchange (ETDEWEB)

Cho, Young Joon [Yonsei University College of Medicine, Seoul (Korea, Republic of); Chung, Jae Joon; Yu, Jeong Sik; Kim, Joo Hee; Kim, Dae Jung; Ahn, Jhii Hyun; Cho, Eun Suk [Gangnam Severance Hospital, Yonsei University College of Medicine, Seoul (Korea, Republic of)

2010-11-15

An alpha-fetoprotein-producing gastric cancer is rare, making up only about 3% of all gastric cancers. Further, gastric cancer with metastasis to the scrotum via a transperitoneal route is extremely rare. We report a case of metastatic scrotal mass in a 68-year-old man who had undergone a subtotal gastrectomy and gastroduodenostomy due to signet ring cell type gastric cancer with a description focusing on the radiologic findings

Prioritizing Test Cases for Memory Leaks in Android Applications

Institute of Scientific and Technical Information of China (English)

Ju Qian; Di Zhou

2016-01-01

Mobile applications usually can only access limited amount of memory. Improper use of the memory can cause memory leaks, which may lead to performance slowdowns or even cause applications to be unexpectedly killed. Although a large body of research has been devoted into the memory leak diagnosing techniques after leaks have been discovered, it is still challenging to find out the memory leak phenomena at first. Testing is the most widely used technique for failure discovery. However, traditional testing techniques are not directed for the discovery of memory leaks. They may spend lots of time on testing unlikely leaking executions and therefore can be inefficient. To address the problem, we propose a novel approach to prioritize test cases according to their likelihood to cause memory leaks in a given test suite. It firstly builds a prediction model to determine whether each test can potentially lead to memory leaks based on machine learning on selected code features. Then, for each input test case, we partly run it to get its code features and predict its likelihood to cause leaks. The most suspicious test cases will be suggested to run at first in order to reveal memory leak faults as soon as possible. Experimental evaluation on several Android applications shows that our approach is effective.

Automatic WSDL-guided Test Case Generation for PropEr Testing of Web Services

Directory of Open Access Journals (Sweden)

Konstantinos Sagonas

2012-10-01

Full Text Available With web services already being key ingredients of modern web systems, automatic and easy-to-use but at the same time powerful and expressive testing frameworks for web services are increasingly important. Our work aims at fully automatic testing of web services: ideally the user only specifies properties that the web service is expected to satisfy, in the form of input-output relations, and the system handles all the rest. In this paper we present in detail the component which lies at the heart of this system: how the WSDL specification of a web service is used to automatically create test case generators that can be fed to PropEr, a property-based testing tool, to create structurally valid random test cases for its operations and check its responses. Although the process is fully automatic, our tool optionally allows the user to easily modify its output to either add semantic information to the generators or write properties that test for more involved functionality of the web services.

Sample test cases using the environmental computer code NECTAR

International Nuclear Information System (INIS)

Ponting, A.C.

1984-06-01

This note demonstrates a few of the many different ways in which the environmental computer code NECTAR may be used. Four sample test cases are presented and described to show how NECTAR input data are structured. Edited output is also presented to illustrate the format of the results. Two test cases demonstrate how NECTAR may be used to study radio-isotopes not explicitly included in the code. (U.K.)

Program Helps Design Tests Of Developmental Software

Science.gov (United States)

Hops, Jonathan

1994-01-01

Computer program called "A Formal Test Representation Language and Tool for Functional Test Designs" (TRL) provides automatic software tool and formal language used to implement category-partition method and produce specification of test cases in testing phase of development of software. Category-partition method useful in defining input, outputs, and purpose of test-design phase of development and combines benefits of choosing normal cases having error-exposing properties. Traceability maintained quite easily by creating test design for each objective in test plan. Effort to transform test cases into procedures simplified by use of automatic software tool to create cases based on test design. Method enables rapid elimination of undesired test cases from consideration and facilitates review of test designs by peer groups. Written in C language.

Performance Testing of Suspension Plasma Sprayed Thermal Barrier Coatings Produced with Varied Suspension Parameters

Directory of Open Access Journals (Sweden)

Nicholas Curry

2015-07-01

Full Text Available Suspension plasma spraying has become an emerging technology for the production of thermal barrier coatings for the gas turbine industry. Presently, though commercial systems for coating production are available, coatings remain in the development stage. Suitable suspension parameters for coating production remain an outstanding question and the influence of suspension properties on the final coatings is not well known. For this study, a number of suspensions were produced with varied solid loadings, powder size distributions and solvents. Suspensions were sprayed onto superalloy substrates coated with high velocity air fuel (HVAF -sprayed bond coats. Plasma spray parameters were selected to generate columnar structures based on previous experiments and were maintained at constant to discover the influence of the suspension behavior on coating microstructures. Testing of the produced thermal barrier coating (TBC systems has included thermal cyclic fatigue testing and thermal conductivity analysis. Pore size distribution has been characterized by mercury infiltration porosimetry. Results show a strong influence of suspension viscosity and surface tension on the microstructure of the produced coatings.

DWPF PCCS version 2.0 test case

International Nuclear Information System (INIS)

Brown, K.G.; Pickett, M.A.

1992-01-01

To verify the operation of the Product Composition Control System (PCCS), a test case specific to DWPF operation was developed. The values and parameters necessary to demonstrate proper DWPF product composition control have been determined and are presented in this paper. If this control information (i.e., for transfers and analyses) is entered into the PCCS as illustrated in this paper, and the results obtained correspond to the independently-generated results, it can safely be said that the PCCS is operating correctly and can thus be used to control the DWPF. The independent results for this test case will be generated and enumerated in a future report. This test case was constructed along the lines of the normal DWPF operation. Many essential parameters are internal to the PCCS (e.g., property constraint and variance information) and can only be manipulated by personnel knowledgeable of the Symbolics reg-sign hardware and software. The validity of these parameters will rely on induction from observed PCCS results. Key process control values are entered into the PCCS as they would during normal operation. Examples of the screens used to input specific process control information are provided. These inputs should be entered into the PCCS database, and the results generated should be checked against the independent, computed results to confirm the validity of the PCCS

Results of Aging Tests of Vendor-Produced Blended Feed Simulant

International Nuclear Information System (INIS)

Russell, Renee L.; Buchmiller, William C.; Cantrell, Kirk J.; Peterson, Reid A.; Rinehart, Donald E.

2009-01-01

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is procuring through Pacific Northwest National Laboratory (PNNL) a minimum of five 3,500 gallon batches of waste simulant for Phase 1 testing in the Pretreatment Engineering Platform (PEP). To make sure that the quality of the simulant is acceptable, the production method was scaled up starting from laboratory-prepared simulant through 15-gallon vendor prepared simulant and 250-gallon vendor prepared simulant before embarking on the production of the 3500-gallon simulant batch by the vendor. The 3500-gallon PEP simulant batches were packaged in 250-gallon high molecular weight polyethylene totes at NOAH Technologies. The simulant was stored in an environmentally controlled environment at NOAH Technologies within their warehouse before blending or shipping. For the 15-gallon, 250-gallon, and 3500-gallon batch 0, the simulant was shipped in ambient temperature trucks with shipment requiring nominally 3 days. The 3500-gallon batch 1 traveled in a 70-75 F temperature controlled truck. Typically the simulant was uploaded in a PEP receiving tank within 24-hours of receipt. The first uploading required longer with it stored outside. Physical and chemical characterization of the 250-gallon batch was necessary to determine the effect of aging on the simulant in transit from the vendor and in storage before its use in the PEP. Therefore, aging tests were conducted on the 250-gallon batch of the vendor-produced PEP blended feed simulant to identify and determine any changes to the physical characteristics of the simulant when in storage. The supernate was also chemically characterized. Four aging scenarios for the vendor-produced blended simulant were studied: (1) stored outside in a 250-gallon tote, (2) stored inside in a gallon plastic bottle, (3) stored inside in a well mixed 5-L tank, and (4) subject to extended temperature cycling under summer temperature conditions in a gallon plastic bottle. The following

BEAT: A Web-Based Boolean Expression Fault-Based Test Case Generation Tool

Science.gov (United States)

Chen, T. Y.; Grant, D. D.; Lau, M. F.; Ng, S. P.; Vasa, V. R.

2006-01-01

BEAT is a Web-based system that generates fault-based test cases from Boolean expressions. It is based on the integration of our several fault-based test case selection strategies. The generated test cases are considered to be fault-based, because they are aiming at the detection of particular faults. For example, when the Boolean expression is in…

Case Study: Guidelines for Producing Videos to Accompany Flipped Cases

Science.gov (United States)

Prud'homme-Généreux, Annie; Schiller, Nancy A.; Wild, John H.; Herreid, Clyde Freeman

2017-01-01

Three years ago, the "National Center for Case Study Teaching in Science" (NCCSTS) was inspired to merge the case study and flipped classroom approaches. The resulting project aimed to create the materials required to teach a flipped course in introductory biology by assigning videos as homework and case studies in the classroom. Three…

Precision closed bomb calorimeter for testing flame and gas producing initiators

Science.gov (United States)

Carpenter, D. R., Jr.; Taylor, A. C., Jr.

1972-01-01

A calorimeter has been developed under this study to help meet the needs of accurate performance monitoring of electrically or mechanically actuated flame and gas producing devices, such as squib-type initiators. A ten cubic centimeter closed bomb (closed volume) calorimeter was designed to provide a standard pressure trace and to measure a nominal 50 calorie output, using the basic components of a Parr Model 1411 calorimeter. Two prototype bombs were fabricated, pressure tested to 2600 psi, and extensively evaluated.

Report on the evaluation of the tritium producing burnable absorber rod lead test assembly. Revision 1

International Nuclear Information System (INIS)

1997-03-01

This report describes the design and fabrication requirements for a tritium-producing burnable absorber rod lead test assembly and evaluates the safety issues associated with tritium-producing burnable absorber rod irradiation on the operation of a commercial light water reactor. The report provides an evaluation of the tritium-producing burnable absorber rod design and concludes that irradiation can be performed within U.S. Nuclear Regulatory Commission regulations applicable to a commercial pressurized light water reactor

Probability of background to produce a signal-like excess, for all Higgs masses tested.

CERN Document Server

ATLAS, collaboration

2012-01-01

The probability of background to produce a signal-like excess, for all the Higgs boson masses tested. At almost all masses, the probability (solid curve) is at least a few percent; however, at 126.5 GeV it dips to 3x10-7, or one chance in three million, the '5-sigma' gold-standard normally used for the discovery of a new particle. A Standard Model Higgs boson with that mass would produce a dip to 4.6 sigma.

Design and Testing of UMM Vertical Ball Mill (UVBM) for producing Aluminium Powder

Science.gov (United States)

Aisyah, I. S.; Caesarendra, Wahyu; Suprihanto, Agus

2018-04-01

UMM Vertical Ball Mill (UVBM) was intended to be the apparatus to produce metal powder with superior characteristic in production rate while retaining good quality of metal powder. The concept of design was adopting design theory of Phal and Beitz with emphasis on increasing of probability of success in engineering and economy aspects.Since it was designed as vertical ball mill, a new way to produce powder, then it need to be tested for the performance after manufactured. The test on UVBM was carried out by milling of aluminium chip for 5 (five) different milling time of 0.5 hours, 1 hour, 3 hours, 5 hours and 7 hours, and the powder product then be characterized for it morphology and size using Scanning Electron Microscope (SEM) and Sieve.The results of the study were the longer of the milling time, the finer of the powder. From the test results of SEM, the morphology of the powder with 5 variations of milling time were most of the powder in form of flake (flat), small round and angular (irregular). The distribution of powder size was best obtained on the variation of milling time 3 hours, 5 hours, and 7 hours with percentage of 200 mesh in size of 22.14 %, 64 % and 91.25 % respectively.

OCL-BASED TEST CASE GENERATION USING CATEGORY PARTITIONING METHOD

Directory of Open Access Journals (Sweden)

A. Jalila

2015-10-01

Full Text Available The adoption of fault detection techniques during initial stages of software development life cycle urges to improve reliability of a software product. Specification-based testing is one of the major criterions to detect faults in the requirement specification or design of a software system. However, due to the non-availability of implementation details, test case generation from formal specifications become a challenging task. As a novel approach, the proposed work presents a methodology to generate test cases from OCL (Object constraint Language formal specification using Category Partitioning Method (CPM. The experiment results indicate that the proposed methodology is more effective in revealing specification based faults. Furthermore, it has been observed that OCL and CPM form an excellent combination for performing functional testing at the earliest to improve software quality with reduced cost.

A prevalence-based association test for case-control studies.

Science.gov (United States)

Ryckman, Kelli K; Jiang, Lan; Li, Chun; Bartlett, Jacquelaine; Haines, Jonathan L; Williams, Scott M

2008-11-01

Genetic association is often determined in case-control studies by the differential distribution of alleles or genotypes. Recent work has demonstrated that association can also be assessed by deviations from the expected distributions of alleles or genotypes. Specifically, multiple methods motivated by the principles of Hardy-Weinberg equilibrium (HWE) have been developed. However, these methods do not take into account many of the assumptions of HWE. Therefore, we have developed a prevalence-based association test (PRAT) as an alternative method for detecting association in case-control studies. This method, also motivated by the principles of HWE, uses an estimated population allele frequency to generate expected genotype frequencies instead of using the case and control frequencies separately. Our method often has greater power, under a wide variety of genetic models, to detect association than genotypic, allelic or Cochran-Armitage trend association tests. Therefore, we propose PRAT as a powerful alternative method of testing for association.

ESBL-producing Escherichia coli in Swedish gulls-A case of environmental pollution from humans?

Directory of Open Access Journals (Sweden)

Clara Atterby

Full Text Available ESBL-producing bacteria are present in wildlife and the environment might serve as a resistance reservoir. Wild gulls have been described as frequent carriers of ESBL-producing E. coli strains with genotypic characteristics similar to strains found in humans. Therefore, potential dissemination of antibiotic resistance genes and bacteria between the human population and wildlife need to be further investigated. Occurrence and characterization of ESBL-producing E. coli in Swedish wild gulls were assessed and compared to isolates from humans, livestock and surface water collected in the same country and similar time-period. Occurrence of ESBL-producing E. coli in Swedish gulls is about three times higher in gulls compared to Swedish community carriers (17% versus 5% and the genetic characteristics of the ESBL-producing E. coli population in Swedish wild gulls and Swedish human are similar. ESBL-plasmids IncF- and IncI1-type carrying ESBL-genes blaCTX-M-15 or blaCTX-M-14 were most common in isolates from both gulls and humans, but there was limited evidence of clonal transmission. Isolates from Swedish surface water harbored similar genetic characteristics, which highlights surface waters as potential dissemination routes between wildlife and the human population. Even in a low-prevalence country such as Sweden, the occurrence of ESBL producing E. coli in wild gulls and the human population appears to be connected and the occurrence of ESBL-producing E. coli in Swedish gulls is likely a case of environmental pollution.

ESBL-producing Escherichia coli in Swedish gulls-A case of environmental pollution from humans?

Science.gov (United States)

Atterby, Clara; Börjesson, Stefan; Ny, Sofia; Järhult, Josef D; Byfors, Sara; Bonnedahl, Jonas

2017-01-01

ESBL-producing bacteria are present in wildlife and the environment might serve as a resistance reservoir. Wild gulls have been described as frequent carriers of ESBL-producing E. coli strains with genotypic characteristics similar to strains found in humans. Therefore, potential dissemination of antibiotic resistance genes and bacteria between the human population and wildlife need to be further investigated. Occurrence and characterization of ESBL-producing E. coli in Swedish wild gulls were assessed and compared to isolates from humans, livestock and surface water collected in the same country and similar time-period. Occurrence of ESBL-producing E. coli in Swedish gulls is about three times higher in gulls compared to Swedish community carriers (17% versus 5%) and the genetic characteristics of the ESBL-producing E. coli population in Swedish wild gulls and Swedish human are similar. ESBL-plasmids IncF- and IncI1-type carrying ESBL-genes blaCTX-M-15 or blaCTX-M-14 were most common in isolates from both gulls and humans, but there was limited evidence of clonal transmission. Isolates from Swedish surface water harbored similar genetic characteristics, which highlights surface waters as potential dissemination routes between wildlife and the human population. Even in a low-prevalence country such as Sweden, the occurrence of ESBL producing E. coli in wild gulls and the human population appears to be connected and the occurrence of ESBL-producing E. coli in Swedish gulls is likely a case of environmental pollution.

Post irradiation effect on some antiphagocytic substances produced by pathogenic microorganisms

International Nuclear Information System (INIS)

Shehata, M.M.K.

2003-01-01

Some clinical isolated microorganiams can produce antiphagocytic virulence substance. In this study 43 bacterial strains were isolated from cervix of 50 patients. Escheruchia coli was the most common species isolated (39.53%) followed by Klebsiella pneumoniae (23.26), Pseudomonas aeruginosa (11.63%), Proteus mirabilis (9.30%), Klebsiella oxytoca (4.65%), Staphylococcus warneri (4.65%), Klebsiella group 47 (2.33%), Morganella morganii (2.33%) and Staphylococcus hominis (2.33%) four yeast fungal organisms were isolated in this study Candida albicans was the only Candida species isolated representing 8.51% of total number of pathogenic bacteria and yeast fungi isolated. Radiotherapy of these cancer patients had many effects on the microbial cells. The tested isolates were exposed to in-vivo multiple fractionated doses 10-50Gy and in-vitro single equivalent dose 7.04-20Gy. The isolated strains were tested for antimicrbial agent susceptibility using 18 different antibiotics for bacterial isolates and anystatin for Candida albicans. The effect of bacterial and yeast fungal virulence factors on neutrophil phagocytosis and antimicrobial activity was examined. Disk susceptibility testing suggested that, the isolated producer strains which were positive for extracellular proteinase enzyme and/or for slime production that correlate with infectivity were resistant to erythromycin, streptomycin, neomycin, kanamycin, tetracycline, cephalothin and sulphamethoxazol/trimethoprim and rarely susceptible to amoxicillin /clavulanic acid and cefotaxime. In contrast, many non-producer strains were susceptible to most of the tested antibiotics with marked variability among species. In case of Candida albicans all the tested strains were susceptible to the tested antimycotic agent used before and after in-vitro irradiation at a dose level of 20gy. It was found that slime substance and/or proteinase enzyme reduced the phagocytic activity of the leukocytes against the producer bacterial

Results from a first production of enhanced Silicon Sensor Test Structures produced by ITE Warsaw

Science.gov (United States)

Bergauer, T.; Dragicevic, M.; Frey, M.; Grabiec, P.; Grodner, M.; Hänsel, S.; Hartmann, F.; Hoffmann, K.-H.; Hrubec, J.; Krammer, M.; Kucharski, K.; Macchiolo, A.; Marczewski, J.

2009-01-01

Monitoring the manufacturing process of silicon sensors is essential to ensure stable quality of the produced detectors. During the CMS silicon sensor production we were utilising small Test Structures (TS) incorporated on the cut-away of the wafers to measure certain process-relevant parameters. Experience from the CMS production and quality assurance led to enhancements of these TS. Another important application of TS is the commissioning of new vendors. The measurements provide us with a good understanding of the capabilities of a vendor's process. A first batch of the new TS was produced at the Institute of Electron Technology in Warsaw Poland. We will first review the improvements to the original CMS test structures and then discuss a selection of important measurements performed on this first batch.

Cavitating Propeller Performance in Inclined Shaft Conditions with OpenFOAM: PPTC 2015 Test Case

Science.gov (United States)

Gaggero, Stefano; Villa, Diego

2018-05-01

In this paper, we present our analysis of the non-cavitating and cavitating unsteady performances of the Potsdam Propeller Test Case (PPTC) in oblique flow. For our calculations, we used the Reynolds-averaged Navier-Stokes equation (RANSE) solver from the open-source OpenFOAM libraries. We selected the homogeneous mixture approach to solve for multiphase flow with phase change, using the volume of fluid (VoF) approach to solve the multiphase flow and modeling the mass transfer between vapor and water with the Schnerr-Sauer model. Comparing the model results with the experimental measurements collected during the Second Workshop on Cavitation and Propeller Performance - SMP'15 enabled our assessment of the reliability of the open-source calculations. Comparisons with the numerical data collected during the workshop enabled further analysis of the reliability of different flow solvers from which we produced an overview of recommended guidelines (mesh arrangements and solver setups) for accurate numerical prediction even in off-design conditions. Lastly, we propose a number of calculations using the boundary element method developed at the University of Genoa for assessing the reliability of this dated but still widely adopted approach for design and optimization in the preliminary stages of very demanding test cases.

Procedures and Claims among US Evidence-Producing Organisations: The Case of the Incredible Years Programme

Science.gov (United States)

Karlsson, Patrik; Bergmark, Anders; Lundström, Tommy

2014-01-01

We explore how four evidence-producing organisations in the US go ahead when they rate the evidence base for psychosocial interventions, using the Incredible Years programme as our case study. The findings demonstrate variation in the procedures and resulting evidence claims across the organisations, with some organisations being strict and some…

Experimental impact testing and analysis of composite fan cases

Science.gov (United States)

Vander Klok, Andrew Joe

For aircraft engine certification, one of the requirements is to demonstrate the ability of the engine to withstand a fan blade-out (FBO) event. A FBO event may be caused by fatigue failure of the fan blade itself or by impact damage of foreign objects such as bird strike. An un-contained blade can damage flight critical engine components or even the fuselage. The design of a containment structure is related to numerous parameters such as the blade tip speed; blade material, size and shape; hub/tip diameter; fan case material, configuration, rigidity, etc. To investigate all parameters by spin experiments with a full size rotor assembly can be prohibitively expensive. Gas gun experiments can generate useful data for the design of engine containment cases at much lower costs. To replicate the damage modes similar to that on a fan case in FBO testing, the gas gun experiment has to be carefully designed. To investigate the experimental procedure and data acquisition techniques for FBO test, a low cost, small spin rig was first constructed. FBO tests were carried out with the small rig. The observed blade-to-fan case interactions were similar to those reported using larger spin rigs. The small rig has the potential in a variety of applications from investigating FBO events, verifying concept designs of rotors, to developing spin testing techniques. This rig was used in the developments of the notched blade releasing mechanism, a wire trigger method for synchronized data acquisition, high speed video imaging and etc. A relationship between the notch depth and the release speed was developed and verified. Next, an original custom designed spin testing facility was constructed. Driven by a 40HP, 40,000rpm air turbine, the spin rig is housed in a vacuum chamber of phi72inx40in (1829mmx1016mm). The heavily armored chamber is furnished with 9 viewports. This facility enables unprecedented investigations of FBO events. In parallel, a 15.4ft (4.7m) long phi4.1inch (105mm

Computing power and sample size for case-control association studies with copy number polymorphism: application of mixture-based likelihood ratio test.

Directory of Open Access Journals (Sweden)

Wonkuk Kim

Full Text Available Recent studies suggest that copy number polymorphisms (CNPs may play an important role in disease susceptibility and onset. Currently, the detection of CNPs mainly depends on microarray technology. For case-control studies, conventionally, subjects are assigned to a specific CNP category based on the continuous quantitative measure produced by microarray experiments, and cases and controls are then compared using a chi-square test of independence. The purpose of this work is to specify the likelihood ratio test statistic (LRTS for case-control sampling design based on the underlying continuous quantitative measurement, and to assess its power and relative efficiency (as compared to the chi-square test of independence on CNP counts. The sample size and power formulas of both methods are given. For the latter, the CNPs are classified using the Bayesian classification rule. The LRTS is more powerful than this chi-square test for the alternatives considered, especially alternatives in which the at-risk CNP categories have low frequencies. An example of the application of the LRTS is given for a comparison of CNP distributions in individuals of Caucasian or Taiwanese ethnicity, where the LRTS appears to be more powerful than the chi-square test, possibly due to misclassification of the most common CNP category into a less common category.

Findings concerning testis, vas deference, and epididymis in adult cases with nonpalpable testes

Directory of Open Access Journals (Sweden)

Coskun Sahin

2011-12-01

Full Text Available In this study, we aimed to state the relationship between testis, epididymis and vas deference, in adult cases with nonpalpable testis. Between January 1996 and December 2009, we evaluated 154 adult cases with nonpalpable testes. Mean age was 23 years (20-27 years. Explorations were performed by open inguinal incision, laparoscopy, and by inguinal incision and laparoscopy together on 22, 131 and 1 patient, respectively. Of all the unilateral cases, 32 were accepted as vanishing testis. In five of these cases, vas deference was ending inside the abdomen, and in the others, it was ending inside the scrotum. In the remaining 99 unilateral and 22 bilateral cases, 143 testes were found in total. Testes were found in the inguinal canal as atrophic in one case, at the right renal pedicle level with dysmorphic testis in one case, and anterior to the internal ring between the bladder and the common iliac vessels at a smaller than normal size in 119 cases. One (0.69% case did not have epididymis. While epididymis was attached to the testis only at the head and tail locations in 88 (61.53% cases, it was totally attached to the testis in 54 (37.76% cases. There is an obviously high incidence rate of testis and vas deference anomalies, where epididymis is the most frequent one. In cases with abdominal testes, this rate is highest for high localised abdominal testes.

Results from a first production of enhanced Silicon Sensor Test Structures produced by ITE Warsaw

Energy Technology Data Exchange (ETDEWEB)

Bergauer, T. [Institute of High Energy Physics, Austrian Academy of Sciences, Nikolsdorfergasse 18, 1050 Vienna (Austria); Dragicevic, M. [Institute of High Energy Physics, Austrian Academy of Sciences, Nikolsdorfergasse 18, 1050 Vienna (Austria)], E-mail: dragicevic@oeaw.ac.at; Frey, M. [Institut fuer Experimentelle Kernphysik (IEKP), Universitaet Karlsruhe (Thailand) (Germany); Grabiec, P.; Grodner, M. [Institute of Electron Technology (ITE), Warsaw (Poland); Haensel, S. [Institute of High Energy Physics, Austrian Academy of Sciences, Nikolsdorfergasse 18, 1050 Vienna (Austria); Hartmann, F.; Hoffmann, K.-H. [Institut fuer Experimentelle Kernphysik (IEKP), Universitaet Karlsruhe (Thailand) (Germany); Hrubec, J.; Krammer, M. [Institute of High Energy Physics, Austrian Academy of Sciences, Nikolsdorfergasse 18, 1050 Vienna (Austria); Kucharski, K. [Institute of Electron Technology (ITE), Warsaw (Poland); Macchiolo, A. [Max-Planck-Institut fuer Physik (MPI), Munich (Germany); Marczewski, J. [Institute of Electron Technology (ITE), Warsaw (Poland)

2009-01-01

Monitoring the manufacturing process of silicon sensors is essential to ensure stable quality of the produced detectors. During the CMS silicon sensor production we were utilising small Test Structures (TS) incorporated on the cut-away of the wafers to measure certain process-relevant parameters. Experience from the CMS production and quality assurance led to enhancements of these TS. Another important application of TS is the commissioning of new vendors. The measurements provide us with a good understanding of the capabilities of a vendor's process. A first batch of the new TS was produced at the Institute of Electron Technology in Warsaw Poland. We will first review the improvements to the original CMS test structures and then discuss a selection of important measurements performed on this first batch.

30 CFR 250.522 - When do I have to repeat casing diagnostic testing?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When do I have to repeat casing diagnostic... Operations Casing Pressure Management § 250.522 When do I have to repeat casing diagnostic testing? Casing diagnostic testing must be repeated according to the following table: When * * * you must repeat diagnostic...

Consumer's Fresh Produce Food Safety Practices: Outcomes of a Fresh Produce Safety Education Program

Science.gov (United States)

Scott, Amanda R.; Pope, Paul E.; Thompson, Britta M.

2009-01-01

The Centers for Disease Control and Prevention estimate that there are 76 million cases of foodborne disease annually. Foodborne disease is usually associated with beef, poultry, and seafood. However, there is an increasing number of foodborne disease cases related to fresh produce. Consumers may not associate fresh produce with foodborne disease…

Automatic Generation of Test Cases from UML Models

Directory of Open Access Journals (Sweden)

Constanza Pérez

2018-04-01

Full Text Available [Context] The growing demand for high-quality software has caused the industry to incorporate processes to enable them to comply with these standards, but increasing the cost of development. A strategy to reduce this cost is to incorporate quality evaluations from early stages of software development. A technique that facilitates this evaluation is the model-based testing, which allows to generate test cases at early phases using as input the conceptual models of the system. [Objective] In this paper, we introduce TCGen, a tool that enables the automatic generation of abstract test cases starting from UML conceptual models. [Method] The design and implementation of TCGen, a technique that applies different testing criteria to class diagrams and state transition diagrams to generates test cases, is presented as a model-based testing approach. To do that, TCGen uses UML models, which are widely used at industry and a set of algorithms that recognize the concepts in the models in order to generate abstract test cases. [Results] An exploratory experimental evaluation has been performed to compare the TCGen tool with traditional testing. [Conclusions] Even though the exploratory evaluation shows promising results, it is necessary to perform more empirical evaluations in order to generalize the results. Abstract (in Spanish: [Contexto] La creciente demanda de software de alta calidad ha provocado que la industria incorpore procesos para permitirles cumplir con estos estándares, pero aumentando el costo del desarrollo. Una estrategia para reducir este costo es incorporar evaluaciones de calidad desde las primeras etapas del desarrollo del software. Una técnica que facilita esta evaluación es la prueba basada en modelos, que permite generar casos de prueba en fases tempranas utilizando como entrada los modelos conceptuales del sistema. [Objetivo] En este artículo, presentamos TCGen, una herramienta que permite la generación automática de casos de

Paternity tests in Mexico: Results obtained in 3005 cases.

Science.gov (United States)

García-Aceves, M E; Romero Rentería, O; Díaz-Navarro, X X; Rangel-Villalobos, H

2018-04-01

National and international reports regarding the paternity testing activity scarcely include information from Mexico and other Latin American countries. Therefore, we report different results from the analysis of 3005 paternity cases analyzed during a period of five years in a Mexican paternity testing laboratory. Motherless tests were the most frequent (77.27%), followed by trio cases (20.70%); the remaining 2.04% included different cases of kinship reconstruction. The paternity exclusion rate was 29.58%, higher but into the range reported by the American Association of Blood Banks (average 24.12%). We detected 65 mutations, most of them involving one-step (93.8% and the remaining were two-step mutations (6.2%) thus, we were able to estimate the paternal mutation rate for 17 different STR loci: 0.0018 (95% CI 0.0005-0.0047). Five triallelic patterns and 12 suspected null alleles were detected during this period; however, re-amplification of these samples with a different Human Identification (HID) kit confirmed the homozygous genotypes, which suggests that most of these exclusions actually are one-step mutations. HID kits with ≥20 STRs detected more exclusions, diminishing the rate of inconclusive results with isolated exclusions (Powerplex 21 kit (20 STRs) and Powerplex Fusion kit (22 STRs) offered similar PI (p = 0.379) and average number of exclusions (PE) (p = 0.339) when a daughter was involved in motherless tests. In brief, besides to report forensic parameters from paternity tests in Mexico, results describe improvements to solve motherless paternity tests using HID kits with ≥20 STRs instead of one including 15 STRs. Copyright © 2018 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Design and Testing of Braided Composite Fan Case Materials and Components

Science.gov (United States)

Roberts, Gary D.; Pereira, J. Michael; Braley, Michael S.; Arnold, William a.; Dorer, James D.; Watson, William R/.

2009-01-01

Triaxial braid composite materials are beginning to be used in fan cases for commercial gas turbine engines. The primary benefit for the use of composite materials is reduced weight and the associated reduction in fuel consumption. However, there are also cost benefits in some applications. This paper presents a description of the braided composite materials and discusses aspects of the braiding process that can be utilized for efficient fabrication of composite cases. The paper also presents an approach that was developed for evaluating the braided composite materials and composite fan cases in a ballistic impact laboratory. Impact of composite panels with a soft projectile is used for materials evaluation. Impact of composite fan cases with fan blades or blade-like projectiles is used to evaluate containment capability. A post-impact structural load test is used to evaluate the capability of the impacted fan case to survive dynamic loads during engine spool down. Validation of these new test methods is demonstrated by comparison with results of engine blade-out tests.

Class hierarchical test case generation algorithm based on expanded EMDPN model

Institute of Scientific and Technical Information of China (English)

LI Jun-yi; GONG Hong-fang; HU Ji-ping; ZOU Bei-ji; SUN Jia-guang

2006-01-01

A new model of event and message driven Petri network(EMDPN) based on the characteristic of class interaction for messages passing between two objects was extended. Using EMDPN interaction graph, a class hierarchical test-case generation algorithm with cooperated paths (copaths) was proposed, which can be used to solve the problems resulting from the class inheritance mechanism encountered in object-oriented software testing such as oracle, message transfer errors, and unreachable statement. Finally, the testing sufficiency was analyzed with the ordered sequence testing criterion(OSC). The results indicate that the test cases stemmed from newly proposed automatic algorithm of copaths generation satisfies synchronization message sequences testing criteria, therefore the proposed new algorithm of copaths generation has a good coverage rate.

A Human Proximity Operations System test case validation approach

Science.gov (United States)

Huber, Justin; Straub, Jeremy

A Human Proximity Operations System (HPOS) poses numerous risks in a real world environment. These risks range from mundane tasks such as avoiding walls and fixed obstacles to the critical need to keep people and processes safe in the context of the HPOS's situation-specific decision making. Validating the performance of an HPOS, which must operate in a real-world environment, is an ill posed problem due to the complexity that is introduced by erratic (non-computer) actors. In order to prove the HPOS's usefulness, test cases must be generated to simulate possible actions of these actors, so the HPOS can be shown to be able perform safely in environments where it will be operated. The HPOS must demonstrate its ability to be as safe as a human, across a wide range of foreseeable circumstances. This paper evaluates the use of test cases to validate HPOS performance and utility. It considers an HPOS's safe performance in the context of a common human activity, moving through a crowded corridor, and extrapolates (based on this) to the suitability of using test cases for AI validation in other areas of prospective application.

An Extended Quadratic Frobenius Primality Test with Average Case Error Estimates

DEFF Research Database (Denmark)

Damgård, Ivan Bjerre; Frandsen, Gudmund Skovbjerg

2001-01-01

We present an Extended Quadratic Frobenius Primality Test (EQFT), which is related to an extends the Miller-Rabin test and the Quadratic Frobenius test (QFT) by Grantham. EQFT takes time about equivalent to 2 Miller-Rabin tests, but has much smaller error probability, namely 256/331776t for t...... for the error probability of this algorithm as well as a general closed expression bounding the error. For instance, it is at most 2-143 for k = 500, t = 2. Compared to earlier similar results for the Miller-Rabin test, the results indicates that our test in the average case has the effect of 9 Miller......-Rabin tests, while only taking time equivalent to about 2 such tests. We also give bounds for the error in case a prime is sought by incremental search from a random starting point....

Prevailence of Patch Test Positivity with Some Bases

Directory of Open Access Journals (Sweden)

J S Pasricha

1987-01-01

Full Text Available To evaluate the suitability of some chemicals to act as bases for antigens for patch tests, patch tests were performed with these agents in patients having contact dermatitis. Propylene glycol′used as such produced positive reactions in 25 (50% patients of which 12 were 2 + or more, polyethylene glycol 200 produced positive reactions in 9 (18% cases of which 4 cases were 2 + or more, a mixture of liquid paraffin and hard paraffin gave rise to positive reactions in 10 (10% cases 3 of these being 2 +, a mixture of liquid paraffin and bees wax was positive in 14 (14,Yo cases 3 of these being 2 +, yellow petrolatum was positive in 4 (8% cases, one of which was 2 +, white petrolatum was positive in S (6% cases all of these being + reactions only, and glycerol gave rise to a I + reaction in only one (2% caw. In tropical countries, water should be as base for as many antigens as possible for others, a control test with the b must be included.

Evaluation of the BYG Carba Test, a New Electrochemical Assay for Rapid Laboratory Detection of Carbapenemase-Producing Enterobacteriaceae

Science.gov (United States)

Yunus, Sami; Massart, Marion; Huang, Te-Din; Glupczynski, Youri

2015-01-01

Accurate detection of carbapenemase-producing Enterobacteriaceae (CPE) constitutes a major laboratory diagnostic challenge. We evaluated an electrochemical technique (the BYG Carba test) which allows detection of CPE in less than 35 min. The BYG Carba test was first validated in triplicate against 57 collection isolates with previously characterized β-lactam resistance mechanisms (OXA-48, n = 12; KPC, n = 8; NDM, n = 8; VIM, n = 8; IMP, n = 3; GIM, n = 1; GES-6, n = 1; no carbapenemase, n = 16) and against a panel of 10 isolates obtained from the United Kingdom National External Quality Assessment Service (NEQAS). The test was then evaluated prospectively against 324 isolates referred to the national reference center for suspicion of CPE. The BYG Carba test results were compared with those obtained with the Carba NP test using multiplex PCR sequencing as the gold standard. Of the 57 collection and the 10 NEQAS isolates, all but one GES-6-producing isolate were correctly identified by the Carba BYG test. Among the 324 consecutive Enterobacteriaceae isolates tested prospectively, 146 were confirmed as noncarbapenemase producers by PCR while 178 harbored a carbapenemase gene (OXA-48, n = 117; KPC, n = 25; NDM, n = 23; and VIM, n = 13). Prospectively, in comparison with PCR results, the BYG Carba test displayed 95% sensitivity and 100% specificity versus 89% and 100%, respectively, for the Carba NP test. The BYG Carba test is a novel, rapid, and efficient assay based on an electro-active polymer biosensing technology discriminating between CPE and non-CPE. The precise electrochemical signal (electrochemical impedance variations) allows the establishment of real-time objective measurement and interpretation criteria which should facilitate the accreditation process of this technology. PMID:26637378

Alpha-fetoprotein-producing ovarian clear cell adenocarcinoma with fetal gut differentiation: a rare case report and literature review.

Science.gov (United States)

Chao, Wei-Ting; Liu, Chia-Hao; Lai, Chiung-Ru; Chen, Yi-Jen; Chuang, Chi-Mu; Wang, Peng-Hui

2018-06-22

Alpha-fetoprotein (AFP) is a useful tumor marker for ovarian germ cell tumors, particularly yolk sac tumor (YST). It is valuable for both diagnosis and further follow-up. Epithelial ovarian carcinoma (EOC) rarely secretes AFP, especially for clear cell type and in the postmenopausal women. Based on the limited knowledge about AFP-producing clear cell type EOC, a case and literature review on this topic is extensively reviewed. We report a 55-year-old postmenopausal woman experienced vaginal spotting for one month, and serum level of AFP was 60,721 ng/ml initially. Histological examination was clear cell type EOC. Tumor cells revealed strong immunoreactivity for glypican-3 (GPC3) and AFP and weak for hepatocyte nuclear factor-1 beta (HNF-1 beta), but negative for CD30, making the diagnosis of AFP-producing clear cell type EOC with fetal gut differentiation in focal areas, FIGO (International Federation of Gynecology and Obstetrics) IIIc. Although the patient underwent an intensive treatment, including optimal debulking surgery and multi-agent chemotherapy, the patient died of disease. To provide a better understanding of clinical and molecular characteristics of the AFP-producing clear cell type EOC, we conducted a systematic literature review. A total of three papers described the AFP-producing clear cell type EOC are available. The overall survival rate of these cases, including the current case is 50%. Although immunohistochemical examination is not always needed in routine for the diagnosis of clear cell type EOC, to distinguish from other tumors, especially germ cell tumors, or to provide the better way to monitor therapeutic response or to evaluate the disease status, immunostaining, including GPC3, HNF-1 beta, CD30, cytokeratin 7 or 20, and AFP is taken into account. Due to rarity, the appropriate chemotherapy regimen and the biological behavior of AFP-producing clear cell type EOC are still unclear.

Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector.

Science.gov (United States)

Gottberg, Annika; Morris, Joe; Pollard, Simon; Mark-Herbert, Cecilia; Cook, Matthew

2006-04-15

The EU Directive on Waste Electrical and Electrical Equipment (WEEE) (2002/96/EC), to be implemented in stages from August 2004, attempts to tackle the growing quantity WEEE by making producers responsible for the costs of the collection and recycling of their products at the end of usable life. This is considered to give producers a financial incentive to reduce waste at source through eco-design. This link is, however, under-researched and little is known generally about the effectiveness of extended producer responsibility (EPR) and policies to promote it. This paper presents the findings of an exploratory study to address these important gaps in knowledge. Literature review was used to develop an analytical framework to explain the relationships between the drivers for eco-design and the role of policies to promote EPR. This was applied to eight case studies of firms from the European lighting sector. While quantitative data to confirm the link between EPR and eco-design were difficult to obtain, the case studies showed that EPR has had little effect on product development so far. Within the sector studied, most producers have been able to pass on incremental costs associated with EPR to customers with negligible effects on sales. This reflects perceptions in the lighting sector that, because demand for products is relatively price inelastic and the regulation affects all producers equally, EPR is unlikely to drive eco-design at least in the short run. The cases also showed that choice between individual and centrally provided waste recovery schemes rested on perceptions of relative costs and practicability. It was evident that other drivers, such as bans on hazardous substances, product declarations and supply chain pressures, were often more effective promoters of eco-design. Thus it seems a mix of policy measures is required rather than reliance on economic instruments alone.

Lightning-produced NOx in an explicit electrical scheme tested in a Stratosphere-Troposphere Experiment: Radiation, Aerosols, and Ozone case study

Science.gov (United States)

Barthe, Christelle; Pinty, Jean-Pierre; Mari, CéLine

2007-02-01

An explicit lightning-produced nitrogen oxide (LNOx) scheme has been implemented in a 3-D mesoscale model. The scheme is based on the simulation of the electrical state of the cloud and provides a prediction of the temporal and spatial distribution of the lightning flashes. The frequency and the 3-D morphology of the lightning flashes are captured realistically so fresh nitrogen oxide molecules can be added along the complex flash path as a function of the pressure, as suggested by results from laboratory experiments. The scheme is tested on the 10 July 1996 Stratosphere-Troposphere Experiment: Radiation, Aerosols, and Ozone (STERAO) storm. The model reproduces many features of the observed increase of electrical activity and LNOx flux density between the multicell and supercell stages. LNOx dominates the NOx budget in the upper part of the cells with instantaneous peak concentrations exceeding 4 ppbv, as observed. The computed flux of NOx across the anvil shows a mean value of 6 mol m-2 s-1 during the last 90 min of the simulation. This value is remarkably stable and compares favorably with the observations.

Tests of spinning turbine fragment impact on casing models

International Nuclear Information System (INIS)

Wilbeck, J.S.

1984-01-01

Ten 1/11-scale model turbine missile impact tests were conducted at a Naval spin chamber test facility to assess turbine missile effects in nuclear plant design. The objective of the tests was to determine the effects of missile spin, blade crush, and target edge conditions on the impact of turbine disk fragments on the steel casing. The results were intended for use in making realistic estimates for the initial conditions of fragments that might escape the casing in the event of a disk burst in a nuclear plant. The burst of a modified gas turbine rotor in a high-speed spin chamber provided three missiles with the proper rotational and translational velocities of actual steam turbine fragments. Tests of bladed, spinning missiles were compared with previous tests of unbladed, nonspinning missiles. The total residual energy of the spinning missiles, as observed from high-speed photographs of disk burst, was the same as that of the nonspinning missiles launched in a piercing orientation. Tests with bladed missiles showed that for equal burst speeds, the residual energy of bladed missiles is less than that of unbladed missiles. Impacts of missiles near the edge of targets resulted in residual missile velocities greater than for central impact. (orig.)

30 CFR 250.520 - When do I have to perform a casing diagnostic test?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When do I have to perform a casing diagnostic... Operations Casing Pressure Management § 250.520 When do I have to perform a casing diagnostic test? (a) You must perform a casing diagnostic test within 30 days after first observing or imposing casing pressure...

A Method to Select Test Input Cases for Safety-critical Software

International Nuclear Information System (INIS)

Kim, Heeeun; Kang, Hyungook; Son, Hanseong

2013-01-01

This paper proposes a new testing methodology for effective and realistic quantification of RPS software failure probability. Software failure probability quantification is important factor in digital system safety assessment. In this study, the method for software test case generation is briefly described. The test cases generated by this method reflect the characteristics of safety-critical software and past inputs. Furthermore, the number of test cases can be reduced, but it is possible to perform exhaustive test. Aspect of software also can be reflected as failure data, so the final failure data can include the failure of software itself and external influences. Software reliability is generally accepted as the key factor in software quality since it quantifies software failures which can make a powerful system inoperative. In the KNITS (Korea Nuclear Instrumentation and Control Systems) project, the software for the fully digitalized reactor protection system (RPS) was developed under a strict procedure including unit testing and coverage measurement. Black box testing is one type of Verification and validation (V and V), in which given input values are entered and the resulting output values are compared against the expected output values. Programmable logic controllers (PLCs) were used in implementing critical systems and function block diagram (FBD) is a commonly used implementation language for PLC

Investigation of the potential influence of production treatment chemicals on produced water toxicity

International Nuclear Information System (INIS)

Stine, E.R.; Gala, W.R.; Henry, L.R.

1993-01-01

Production treatment chemicals represent a diverse collection of chemical classes, added at various points from the wellhead to the final flotation cell, to prevent operational upsets and enhance the separation of oil from water. Information in the literature indicates that while many treatment chemicals are thought to partition into oil and not into the produced water, there are cases where a sufficiently water soluble treatment chemical is added at high enough concentrations to suggest that the treatment chemical may add to the aquatic toxicity of the produced water. A study was conducted to evaluate the potential effect of production treatment chemicals on the toxicity of produced waters using the US EPA Seven-day Mysidopsis bahia Survival, Growth and Fecundity Test. Samples of produced water were collected and tested for toxicity from three platforms under normal operating conditions, followed by repeated sampling and testing after a 72-hour period in which treatment chemical usage was discontinued, to the degree possible. Significant reductions in produced water toxicity were observed for two of the three platforms tested following either cessation of treatment chemical usage, or by comparing the toxicity of samples collected upstream and downstream of the point of treatment chemical addition

Causality relation between the producer price index and the consumer price index. Ecuador Case

Directory of Open Access Journals (Sweden)

Víctor Quinde Rosales

2018-01-01

Full Text Available The present document is an investigation with a type of inductive reasoning. It evaluated the relationship of causality between the producer price index (IPP, and the consumer price index (IPC in a period from January 1998 to December 2016. The unit root test Dickey-Fuller Augmented (DFA was used under an empirical- analytic paradigm, an autoregressive vector-VAR model was generated and the Granger causality test was performed. The results show a positive trend and seasonality in the data of the variables, a VAR model of two variables was obtained with a number of optimal remnants of fourteen VAR2 (14 to which the causality test was performed, demonstrating a bi - directionality of both indices.

30 CFR 250.523 - How long do I keep records of casing pressure and diagnostic tests?

Science.gov (United States)

2010-07-01

... and diagnostic tests? 250.523 Section 250.523 Mineral Resources MINERALS MANAGEMENT SERVICE... casing pressure and diagnostic tests? Records of casing pressure and diagnostic tests must be kept at the field office nearest the well for a minimum of 2 years. The last casing diagnostic test for each casing...

Trichoderma harzianum: Inhibition of mycotoxin producing fungi and toxin biosynthesis.

Science.gov (United States)

Braun, H; Woitsch, L; Hetzer, B; Geisen, R; Zange, B; Schmidt-Heydt, M

2018-04-19

A quarter of the world-wide crop is spoiled by filamentous fungi and their mycotoxins and weather extremes associated with the climate change lead to further deterioration of the situation. The ingestion of mycotoxins causes several health issues leading in the worst case to cancer in humans and animals. Common intervention strategies against mycotoxin producing fungi, such as the application of fungicides, may result in undesirable residues and in some cases to a stress induction of mycotoxin biosynthesis. Moreover, development of fungicide resistances has greatly impacted pre- and postharvest fungal diseases. Hence there is the need to develop alternative strategies to reduce fungal infestation and thus mycotoxin contamination in the food chain. Such a strategy for natural competition of important plant-pathogenic and mycotoxin producing fungi could be Trichoderma harzianum, a mycoparasitic fungus. Especially in direct comparison to certain tested fungicides, the inhibition of different tested fungal species by T. harzianum was comparable, more sustainable and in some cases more effective, too. Besides substantially reduced growth rates, a transcriptional based inhibition of mycotoxin biosynthesis in the competed Aspergillus species could be shown. Furthermore it could be clearly observed by high-resolution Scanning Electron Microscopy (SEM) that T. harzianum actively attaches to the competitor species followed by subsequent enzymatic lysis of those mycelial filaments. The analyzed isolate of T. harzianum MRI349 is not known to produce mycotoxins. In this study it could be successfully proven that T. harzianum as a biological competitor is an effective complement to the use of fungicides. Copyright © 2018 Elsevier B.V. All rights reserved.

Making System Dynamics Cool IV : Teaching & Testing with Cases & Quizzes

NARCIS (Netherlands)

Pruyt, E.

2012-01-01

This follow-up paper presents cases and multiple choice questions for teaching and testing System Dynamics modeling. These cases and multiple choice questions were developed and used between January 2012 and April 2012 a large System Dynamics course (250+ 2nd year BSc and 40+ MSc students per year)

Making System Dynamics Cool III : New Hot Teaching & Testing Cases

NARCIS (Netherlands)

Pruyt, E.

2011-01-01

This follow-up paper presents seven actual cases for testing and teaching System Dynamics developed and used between January 2010 and January 2011 for one of the largest System Dynamics courses (250+ students per year) at Delft University of Technology in the Netherlands. The cases presented in this

Diagnostic yield of hair and urine toxicology testing in potential child abuse cases.

Science.gov (United States)

Stauffer, Stephanie L; Wood, Stephanie M; Krasowski, Matthew D

2015-07-01

Detection of drugs in a child may be the first objective finding that can be reported in cases of suspected child abuse. Hair and urine toxicology testing, when performed as part of the initial clinical evaluation for suspected child abuse or maltreatment, may serve to facilitate the identification of at-risk children. Furthermore, significant environmental exposure to a drug (considered by law to constitute child abuse in some states) may be identified by toxicology testing of unwashed hair specimens. In order to determine the clinical utility of hair and urine toxicology testing in this population we performed a retrospective chart review on all children for whom hair toxicology testing was ordered at our academic medical center between January 2004 and April 2014. The medical records of 616 children aged 0-17.5 years were reviewed for injury history, previous medication and illicit drug use by caregiver(s), urine drug screen result (if performed), hair toxicology result, medication list, and outcome of any child abuse evaluation. Hair toxicology testing was positive for at least one compound in 106 cases (17.2%), with unexplained drugs in 82 cases (13.3%). Of these, there were 48 cases in which multiple compounds (including combination of parent drugs and/or metabolites within the same drug class) were identified in the sample of one patient. The compounds most frequently identified in the hair of our study population included cocaine, benzoylecgonine, native (unmetabolized) tetrahydrocannabinol, and methamphetamine. There were 68 instances in which a parent drug was identified in the hair without any of its potential metabolites, suggesting environmental exposure. Among the 82 cases in which hair toxicology testing was positive for unexplained drugs, a change in clinical outcome was noted in 71 cases (86.5%). Urine drug screens (UDS) were performed in 457 of the 616 reviewed cases. Of these, over 95% of positive UDS results could be explained by iatrogenic drug

The results of dosimetric type tests on the sample of LiF:Mg,Ti thermoluminescence dosimeters produced in Iran

International Nuclear Information System (INIS)

Jafarizadeh, M.; Hosseini Pooya, S. M.; Firoozi, B.; Kamali Shoroodani, A. R.; Mohammadi, Kh.

2011-01-01

In this investigation, the standard type tests performed on the LiF:Mg,Ti chip samples which have been produced in Iran. The dosimetry tests are consisting of sensitivity, homogeneity, linearity, reproducibility, minimum measurable dose, self and residual doses. The obtained results show that some of the tests such as sensitivity, minimum measurable dose, self and residual doses fulfill the criteria given by IEC 61066 and ASTM E668 standards; however, the remaining tests show some discrepancies in comparison with the standards. Also the sensitivity was measured to be 0.92 of that of commercially available TLD-100 (Harshaw) sample. So, the produced LiF:Mg,Ti dosimeter can be used in a routine personal/environmental and medical dosimetry with considering its precision.

Information About Cost of Goods Produced and its Usefulness for Production Engineers - A Case of SME

Science.gov (United States)

Maruszewska, Ewa Wanda; Strojek-Filus, Marzena; Drábková, Zita

2017-12-01

The article stresses the consequences of simplifications implemented in the measurement process of goods produced that are of crucial importance to production engineers in SME. The authors show the variety of possibilities that might be used by financial employees together with probable outputs in terms of valuation distortions. Using the case study the authors emphasis the importance of close cooperation of production engineers with finance professionals as out-puts of finance departments consist an important input for decision-making process of production managers. Further-more, demonstrated deficiencies in terms of methods applicable in financial reporting for measurement of the value of goods produced indicate the need for incorporation more financial and non-financial data in the process of judgments about the final cost of goods produced as simplifications applied in SME distort financial information provided to production engineers.

An assessment of whole effluent toxicity testing as a means of regulating waters produced by the oil and gas industry

International Nuclear Information System (INIS)

Hill, S.L.; Bergman, H.L.

1993-01-01

Approximately 500 million barrels of produced water are discharged to Wyoming's surface waters by the oil and gas industry. This discharges are of two types: direct and indirect. The direct discharges have been issued NPDES permits requiring whole effluent toxicity testing. Toxicity testing requirements have not been incorporated into permits written for indirect discharges because of the applicability of toxicity testing for regulating these waters has not been determined. Preliminary testing has shown that most produced waters are toxic at the point of discharge because of high concentrations of hydrogen sulfide, but that the toxicity of an indirect discharge is often lost before it reaches a receiving stream. Thus, whole effluent toxicity testing of an indirect discharge may be overly stringent, resulting in treatment or reinjection of the water or closure of the well. Any of these options would have severe economic consequences for oil producers and the state's agricultural industry. The purpose of this study was to determine whether whole effluent toxicity testing actually predicts the in-stream effects of indirect discharges on water quality and benthic invertebrate populations. The authors will report the results of short-term ambient toxicity tests and in-stream bioassessments performed upstream and downstream of six indirect discharges located in four drainages in Wyoming

Technology Solutions Case Study: Combustion Safety Simplified Test Protocol

Energy Technology Data Exchange (ETDEWEB)

L. Brand, D. Cautley, D. Bohac, P. Francisco, L. Shen, and S. Gloss

2015-12-01

Combustions safety is an important step in the process of upgrading homes for energy efficiency. There are several approaches used by field practitioners, but researchers have indicated that the test procedures in use are complex to implement and provide too many false positives. Field failures often mean that the house is not upgraded until after remediation or not at all, if not include in the program. In this report the PARR and NorthernSTAR DOE Building America Teams provide a simplified test procedure that is easier to implement and should produce fewer false positives.

Highly Automated Agile Testing Process: An Industrial Case Study

Directory of Open Access Journals (Sweden)

Jarosław Berłowski

2016-09-01

Full Text Available This paper presents a description of an agile testing process in a medium size software project that is developed using Scrum. The research methods used is the case study were as follows: surveys, quantifiable project data sources and qualitative project members opinions were used for data collection. Challenges related to the testing process regarding a complex project environment and unscheduled releases were identified. Based on the obtained results, we concluded that the described approach addresses well the aforementioned issues. Therefore, recommendations were made with regard to the employed principles of agility, specifically: continuous integration, responding to change, test automation and test driven development. Furthermore, an efficient testing environment that combines a number of test frameworks (e.g. JUnit, Selenium, Jersey Test with custom-developed simulators is presented.

Automatic Model-Based Generation of Parameterized Test Cases Using Data Abstraction

NARCIS (Netherlands)

Calamé, Jens R.; Ioustinova, Natalia; Romijn, J.M.T.; Smith, G.; van de Pol, Jan Cornelis

2007-01-01

Developing test suites is a costly and error-prone process. Model-based test generation tools facilitate this process by automatically generating test cases from system models. The applicability of these tools, however, depends on the size of the target systems. Here, we propose an approach to

Does provider-initiated HIV testing and counselling lead to higher HIV testing rate and HIV case finding in Rwandan clinics?

NARCIS (Netherlands)

Kayigamba, Felix R.; van Santen, Daniëla; Bakker, Mirjam I.; Lammers, Judith; Mugisha, Veronicah; Bagiruwigize, Emmanuel; de Naeyer, Ludwig; Asiimwe, Anita; Schim van der Loeff, Maarten F.

2016-01-01

Provider-initiated HIV testing and counselling (PITC) is promoted as a means to increase HIV case finding. We assessed the effectiveness of PITC to increase HIV testing rate and HIV case finding among outpatients in Rwandan health facilities (HF). PITC was introduced in six HFs in 2009-2010. HIV

Full scale turbine-missile casing exit tests

International Nuclear Information System (INIS)

Yoshimura, H.R.; Schamaun, J.T.; Sliter, G.E.

1979-01-01

Two full-scale tests have simulated the impact of a fragment from a failed turbine disk upon the steel casing of a low-pressure steam turbine with the objective of providing data for making more realistic assessments of turbine missile effects for nuclear power plant designers. Data were obtained on both the energy-absorbing mechanisms of the impact process and the post-impact trajectory of the fragment. (orig.)

Determinants of Buying Behavior of Grain Producers: A Multiple Case Study with Mid and Large Size Producers in the State of Mato Grosso

Directory of Open Access Journals (Sweden)

Roberto Fava Scare

2013-12-01

Full Text Available In recent years, Brazilian agribusiness has demanded for inputs, capital goods, financial services and technology. In addition, there have been changes in the size of the properties, as well as in risk management and commercialization practices, and level of education and posture of those responsible for the decision making of agricultural enterprises. It is fundamental for companies that supply inputs and services to farmers to understand some variables in such changing environment, considering that they influence the business model and the buying behavior of rural producers. The purpose of this study is to develop knowledge and familiarity with the buying behavior of grain farmers in the State of Mato Grosso, with the intent of understanding how this behavior can be influenced by theproducer's profile and the farm features, as well as the risk and business management practices, the decision making, the sources of information, and the products and suppliers. In order to achieve such a goal,a multiple case study was developed by interviewing, face to face, three grain producers, from the State of Mato Grosso. The results demonstrate that the most influential determinants on the buying behavior of the interviewed producers were their level of involvement in the decision making process, the benefit they expect from each type of product, the size of their farming operation, the kind of yield production, and the crop rotation and its relation to productivity. Additionally, the ownership or not of the land, the business profitability, credit restrictions and risk management, they all influence the level of the producer's capitalization and consequently his choices of channels for acquiring inputs and capital goods. Last, though not less important, the sources of information and their reliability have an impact on the producer's loyalty to a brand, or to a local distributor or to a salesperson.

Metamorphic Testing Integer Overflow Faults of Mission Critical Program: A Case Study

Directory of Open Access Journals (Sweden)

Zhanwei Hui

2013-01-01

Full Text Available For mission critical programs, integer overflow is one of the most dangerous faults. Different testing methods provide several effective ways to detect the defect. However, it is hard to validate the testing outputs, because the oracle of testing is not always available or too expensive to get, unless the program throws an exception obviously. In the present study, the authors conduct a case study, where the authors apply a metamorphic testing (MT method to detect the integer overflow defect and alleviate the oracle problem in testing critical program of Traffic Collision Avoidance System (TCAS. Experimental results show that, in revealing typical integer mutations, compared with traditional safety property testing method, MT with a novel symbolic metamorphic relation is more effective than the traditional method in some cases.

Spatial Evolution of Producer Service Sectors and Its Influencing Factors in Cities: A Case Study of Hangzhou, China

Directory of Open Access Journals (Sweden)

Yizhou Wu

2018-03-01

Full Text Available Producer service industries are an important feature in the current development of a metropolis. Researchers from different countries are increasingly concerned about location changes and the motives of producer service sectors in cities. Given the rapid development of producer service sectors in developing countries, this study examines changes in the distribution of producer service sectors over the past decade and factors influencing them in a case study using the city of Hangzhou in China. Results show that Hangzhou’s producer service sector is still mainly concentrated in the central business district (CBD. However, a distinct trend of diffusion to suburban areas was observed, which formed several secondary clusters on the periphery of the city. Locations of the CBD, sub-centers, and professional clusters of producer service sectors established by the government are the most important factors that affect the spatial distribution of producer service sectors. The main influencing factors for the spatial evolution of producer service sectors are: (1 the high development cost and residential suburbanization of the central areas of the city promote the development of producer service sectors toward the periphery; (2 city planning has guided the clustering of producer service sectors on the city’s CBD and secondary city centers; (3 city renewal has provided personalized and diversified development space for producer service sectors; (4 incentive policies introduced by the government, such as rentals, and taxes have enhanced the orderly aggregation of producer service sectors.

FARO base case post-test analysis by COMETA code

Energy Technology Data Exchange (ETDEWEB)

Annunziato, A.; Addabbo, C. [Joint Research Centre, Ispra (Italy)

1995-09-01

The paper analyzes the COMETA (Core Melt Thermal-Hydraulic Analysis) post test calculations of FARO Test L-11, the so-called Base Case Test. The FARO Facility, located at JRC Ispra, is used to simulate the consequences of Severe Accidents in Nuclear Power Plants under a variety of conditions. The COMETA Code has a 6 equations two phase flow field and a 3 phases corium field: the jet, the droplets and the fused-debris bed. The analysis shown that the code is able to pick-up all the major phenomena occurring during the fuel-coolant interaction pre-mixing phase.

Effectiveness of test driven development and continuous integration - a case study

NARCIS (Netherlands)

Amrit, Chintan; Meijberg, Yoni

2018-01-01

In this article we describe the implementation of hybrid agile practices, namely Test Driven Development (TDD) and Continuous Integration (CI) at a Dutch SME. The quality and productivity outcomes of the case study were compared to a performance baseline set by a reference case, a preceding

INFORMATION ABOUT COST OF GOODS PRODUCED AND ITS USEFULNESS FOR PRODUCTION ENGINEERS – A CASE OF SME

Directory of Open Access Journals (Sweden)

Ewa Wanda MARUSZEWSKA

2017-10-01

Full Text Available The article stresses the consequences of simplifications implemented in the measurement process of goods produced that are of crucial importance to production engineers in SME. The authors show the variety of possibilities that might be used by financial employees together with probable outputs in terms of valuation distortions. Using the case study the authors emphasis the importance of close cooperation of production engineers with finance professionals as out-puts of finance departments consist an important input for decision-making process of production managers. Further-more, demonstrated deficiencies in terms of methods applicable in financial reporting for measurement of the value of goods produced indicate the need for incorporation more financial and non-financial data in the process of judgments about the final cost of goods produced as simplifications applied in SME distort financial information provided to pro-duction engineers.

A possible alternative to the error prone modified Hodge test to correctly identify the carbapenemase producing Gram-negative bacteria.

Science.gov (United States)

Jeremiah, S S; Balaji, V; Anandan, S; Sahni, R D

2014-01-01

The modified Hodge test (MHT) is widely used as a screening test for the detection of carbapenemases in Gram-negative bacteria. This test has several pitfalls in terms of validity and interpretation. Also the test has a very low sensitivity in detecting the New Delhi metallo-β-lactamase (NDM). Considering the degree of dissemination of the NDM and the growing pandemic of carbapenem resistance, a more accurate alternative test is needed at the earliest. The study intends to compare the performance of the MHT with the commercially available Neo-Sensitabs - Carbapenemases/Metallo-β-Lactamase (MBL) Confirmative Identification pack to find out whether the latter could be an efficient alternative to the former. A total of 105 isolates of Klebsiella pneumoniae resistant to imipenem and meropenem, collected prospectively over a period of 2 years were included in the study. The study isolates were tested with the MHT, the Neo-Sensitabs - Carbapenemases/MBL Confirmative Identification pack and polymerase chain reaction (PCR) for detecting the blaNDM-1 gene. Among the 105 isolates, the MHT identified 100 isolates as carbapenemase producers. In the five isolates negative for the MHT, four were found to produce MBLs by the Neo-Sensitabs. The Neo-Sensitabs did not have any false negatives when compared against the PCR. The MHT can give false negative results, which lead to failure in detecting the carbapenemase producers. Also considering the other pitfalls of the MHT, the Neo-Sensitabs--Carbapenemases/MBL Confirmative Identification pack could be a more efficient alternative for detection of carbapenemase production in Gram-negative bacteria.

A report on the piloting of a novel computer-based medical case simulation for teaching and formative assessment of diagnostic laboratory testing

Directory of Open Access Journals (Sweden)

Clarence D. Kreiter

2011-01-01

Full Text Available Objectives: Insufficient attention has been given to how information from computer-based clinical case simulations is presented, collected, and scored. Research is needed on how best to design such simulations to acquire valid performance assessment data that can act as useful feedback for educational applications. This report describes a study of a new simulation format with design features aimed at improving both its formative assessment feedback and educational function. Methods: Case simulation software (LabCAPS was developed to target a highly focused and well-defined measurement goal with a response format that allowed objective scoring. Data from an eight-case computer-based performance assessment administered in a pilot study to 13 second-year medical students was analyzed using classical test theory and generalizability analysis. In addition, a similar analysis was conducted on an administration in a less controlled setting, but to a much large sample (n=143, within a clinical course that utilized two random case subsets from a library of 18 cases. Results: Classical test theory case-level item analysis of the pilot assessment yielded an average case discrimination of 0.37, and all eight cases were positively discriminating (range=0.11–0.56. Classical test theory coefficient alpha and the decision study showed the eight-case performance assessment to have an observed reliability of σ=G=0.70. The decision study further demonstrated that a G=0.80 could be attained with approximately 3 h and 15 min of testing. The less-controlled educational application within a large medical class produced a somewhat lower reliability for eight cases (G=0.53. Students gave high ratings to the logic of the simulation interface, its educational value, and to the fidelity of the tasks. Conclusions: LabCAPS software shows the potential to provide formative assessment of medical students’ skill at diagnostic test ordering and to provide valid feedback to

Use of combinatorial pharmacogenomic testing in two cases from community psychiatry

Directory of Open Access Journals (Sweden)

Fields ES

2016-08-01

Full Text Available Eve S Fields,1 Raymond A Lorenz,2 Joel G Winner2 1Northwest Center for Community Mental Health, Reston, VA, USA; 2Assurex Health, Mason, OH, USA Abstract: This report describes two cases in which pharmacogenomic testing was utilized to guide medication selection for difficult to treat patients. The first patient is a 29-year old male with bipolar disorder who had severe akathisia due to his long acting injectable antipsychotic. The second patient is a 59-year old female with major depressive disorder who was not ­responding to her medication. In both cases, a proprietary combinatorial pharmacogenomic test was used to inform medication changes and improve patient outcomes. The first patient was switched to a long acting injectable that was not affected by his genetic profile and his adverse effects abated. The second patient had her medications discontinued due to the results of the genetic testing and more intense psychotherapy initiated. While pharmacogenomic testing may be ­helpful in cases such as these presented here, it should never serve as a proxy for a comprehensive biopsychosocial approach. The pharmacogenomic information may be selectively added to this comprehensive approach to support medication treatment. Keywords: pharmacogenomics, adverse effects, risperidone, nortriptyline, paliperidone

Characterization results for 106-AN grout produced in a pilot-scale test

International Nuclear Information System (INIS)

Lokken, R.O.; Bagaasen, L.M.; Martin, P.F.C.; Palmer, S.E.; Anderson, C.M.

1993-06-01

The Grout Treatment Facility (GTF) at Hanford. Washington, will process the low-level fraction of selected double-shell tank (DST) wastes into a cementitious waste form. This facility, which is operated by Westinghouse Hanford Company (WHC), mixes liquid waste with cementitious materials to produce a waste form that immobilizes hazardous constituents through chemical reactions and/or microencapsulation. Over one million gallons of phosphate/sulfate waste were solidified in the first production campaign with this facility. The next tank waste scheduled for treatment is 106-AN (the waste from Tank 241-AN-106). After laboratory studies were conducted to select the grout formulation, tests using the 1/4-scale pilot facilities at the Pacific Northwest Laboratory (PNL) were conducted as part of the formulation verification process. The major objectives of these pilot-scale tests were to determine if the proposed grout formulation could be processed in the pilotscale equipment. to collect thermal information to help determine the best way to manage the grout hydration heat, and to characterize the solidified grout

Neutron measurements of stresses in a test artifact produced by laser-based additive manufacturing

Energy Technology Data Exchange (ETDEWEB)

Gnäupel-Herold, Thomas [Center for Neutron Research, National Institute of Standards and Technology, Gaithersburg MD 20899-6102 (United States); Slotwinski, John; Moylan, Shawn [Intelligent Systems Division, National Institute of Standards and Technology, Gaithersburg MD 20899-8220 (United States)

2014-02-18

A stainless steel test artifact produced by Direct Metal Laser Sintering and similar to a proposed standardized test artifact was examined using neutron diffraction. The artifact contained a number of structures with different aspect ratios pertaining to wall thickness, height above base plate, and side length. Through spatial resolutions of the order of one millimeter the volumetric distribution of stresses in several was measured. It was found that the stresses peak in the tensile region around 500 MPa near the top surface, with balancing compressive stresses in the interior. The presence of a support structure (a one millimeter high, thin walled, hence weaker, lattice structure deposited on the base plate, followed by a fully dense AM structure) has only minor effects on the stresses.

Concept Test of a Smoking Cessation Smart Case.

Science.gov (United States)

Comello, Maria Leonora G; Porter, Jeannette H

2018-04-05

Wearable/portable devices that unobtrusively detect smoking and contextual data offer the potential to provide Just-In-Time Adaptive Intervention (JITAI) support for mobile cessation programs. Little has been reported on the development of these technologies. To address this gap, we offer a case report of users' experiences with a prototype "smart" cigarette case that automatically tracks time and location of smoking. Small-scale user-experience studies are typical of iterative product design and are especially helpful when proposing novel ideas. The purpose of the study was to assess concept acceptability and potential for further development. We tested the prototype case with a small sample of potential users (n = 7). Participants used the hardware/software for 2 weeks and reconvened for a 90-min focus group to discuss experiences and provide feedback. Participants liked the smart case in principle but found the prototype too bulky for easy portability. The potential for the case to convey positive messages about self also emerged as a finding. Participants indicated willingness to pay for improved technology (USD $15-$60 on a one-time basis). The smart case is a viable concept, but design detail is critical to user acceptance. Future research should examine designs that maximize convenience and that explore the device's ability to cue intentions and other cognitions that would support cessation. This study is the first to our knowledge to report formative research on the smart case concept. This initial exploration provides insights that may be helpful to other developers of JITAI-support technology.

Lightning-produced NOx in an explicit electrical scheme: a STERAO case study

Science.gov (United States)

Barthe, C.; Pinty, J.; Mari, C.

2006-12-01

An explicit lightning-produced nitrogen oxide scheme has been implemented in the French mesoscale model Meso-NH. The electrical scheme simulates explicitly the whole electric charge life cycle: charge separation, transfer, transport and neutralization by lightning flashes. The frequency and the 3D morphology of the lightning flashes are reproduced realistically. Therefore, fresh nitrogen oxide molecules can be added along the complex flash path as a function of the pressure, as suggested by results from laboratory experiments. No integral constraint on the total LNOx production at the cloud scale is added. The scheme is tested on the 10 July 1996, STERAO (Stratosphere-Troposphere Experiment-Radiation, Aerosols, and Ozone) storm. The model reproduces many features of the observed increase of electrical activity and LNOx flux through the anvil between the multicell and supercell stages. A large amount of LNOx is selectively produced in the upper part of the cells close to the updraft cores. Instantaneous peak concentrations exceed a few ppbv, as observed. The computed flux of NOx across the anvil compares favorably with the observations. The NOx production is estimated to 36 moles per lightning flash.

26 CFR 1.992-4 - Coordination with personal holding company provisions in case of certain produced film rents.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Coordination with personal holding company provisions in case of certain produced film rents. 1.992-4 Section 1.992-4 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Domestic International...

An Extended Quadratic Frobenius Primality Test with Average and Worst Case Error Estimates

DEFF Research Database (Denmark)

Damgård, Ivan Bjerre; Frandsen, Gudmund Skovbjerg

2003-01-01

We present an Extended Quadratic Frobenius Primality Test (EQFT), which is related to an extends the Miller-Rabin test and the Quadratic Frobenius test (QFT) by Grantham. EQFT takes time about equivalent to 2 Miller-Rabin tests, but has much smaller error probability, namely 256/331776t for t...... for the error probability of this algorithm as well as a general closed expression bounding the error. For instance, it is at most 2-143 for k = 500, t = 2. Compared to earlier similar results for the Miller-Rabin test, the results indicates that our test in the average case has the effect of 9 Miller......-Rabin tests, while only taking time equivalent to about 2 such tests. We also give bounds for the error in case a prime is sought by incremental search from a random starting point....

An Extended Quadratic Frobenius Primality Test with Average- and Worst-Case Error Estimate

DEFF Research Database (Denmark)

Damgård, Ivan Bjerre; Frandsen, Gudmund Skovbjerg

2006-01-01

We present an Extended Quadratic Frobenius Primality Test (EQFT), which is related to an extends the Miller-Rabin test and the Quadratic Frobenius test (QFT) by Grantham. EQFT takes time about equivalent to 2 Miller-Rabin tests, but has much smaller error probability, namely 256/331776t for t...... for the error probability of this algorithm as well as a general closed expression bounding the error. For instance, it is at most 2-143 for k = 500, t = 2. Compared to earlier similar results for the Miller-Rabin test, the results indicates that our test in the average case has the effect of 9 Miller......-Rabin tests, while only taking time equivalent to about 2 such tests. We also give bounds for the error in case a prime is sought by incremental search from a random starting point....

Automated disposal of produced water from a coalbed methane well field, a case history

International Nuclear Information System (INIS)

Luckianow, B.J.; Findley, M.L.; Paschal, W.T.

1994-01-01

This paper provides an overview of the automated disposal system for produced water designed and operated by Taurus Exploration, Inc. This presentation draws from Taurus' case study in the planning, design, construction, and operation of production water disposal facilities for the Mt. Olive well field, located in the Black Warrior Basin of Alabama. The common method for disposing of water produced from coalbed methane wells in the Warrior Basin is to discharge into a receiving stream. The limiting factor in the discharge method is the capability of the receiving stream to assimilate the chloride component of the water discharged. During the winter and spring, the major tributaries of the Black Warrior River are capable of assimilating far more production water than operations can generate. During the summer and fall months, however, these same tributaries can approach near zero flow, resulting in insufficient flow for dilution. During such periods pumping shut-down within the well field can be avoided by routing production waters into a storage facility. This paper discusses the automated production water disposal system on Big Sandy Creek designed and operated by Taurus. This system allows for continuous discharge to the receiving stream, thus taking full advantage of Big Sandy Creek's assimilative capacity, while allowing a provision for excess produced water storage and future stream discharge

Optimized periodic verification testing blended risk and performance-based MOV inservice test program an application of ASME code case OMN-1

Energy Technology Data Exchange (ETDEWEB)

Sellers, C.; Fleming, K.; Bidwell, D.; Forbes, P. [and others

1996-12-01

This paper presents an application of ASME Code Case OMN-1 to the GL 89-10 Program at the South Texas Project Electric Generating Station (STPEGS). Code Case OMN-1 provides guidance for a performance-based MOV inservice test program that can be used for periodic verification testing and allows consideration of risk insights. Blended probabilistic and deterministic evaluation techniques were used to establish inservice test strategies including both test methods and test frequency. Described in the paper are the methods and criteria for establishing MOV safety significance based on the STPEGS probabilistic safety assessment, deterministic considerations of MOV performance characteristics and performance margins, the expert panel evaluation process, and the development of inservice test strategies. Test strategies include a mix of dynamic and static testing as well as MOV exercising.

Optimized periodic verification testing blended risk and performance-based MOV inservice test program an application of ASME code case OMN-1

International Nuclear Information System (INIS)

Sellers, C.; Fleming, K.; Bidwell, D.; Forbes, P.

1996-01-01

This paper presents an application of ASME Code Case OMN-1 to the GL 89-10 Program at the South Texas Project Electric Generating Station (STPEGS). Code Case OMN-1 provides guidance for a performance-based MOV inservice test program that can be used for periodic verification testing and allows consideration of risk insights. Blended probabilistic and deterministic evaluation techniques were used to establish inservice test strategies including both test methods and test frequency. Described in the paper are the methods and criteria for establishing MOV safety significance based on the STPEGS probabilistic safety assessment, deterministic considerations of MOV performance characteristics and performance margins, the expert panel evaluation process, and the development of inservice test strategies. Test strategies include a mix of dynamic and static testing as well as MOV exercising

An Iterative Procedure for Efficient Testing of B2B: A Case in Messaging Service Tests

Energy Technology Data Exchange (ETDEWEB)

Kulvatunyou, Boonserm [ORNL

2007-03-01

Testing is a necessary step in systems integration. Testing in the context of inter-enterprise, business-to-business (B2B) integration is more difficult and expensive than intra-enterprise integration. Traditionally, the difficulty is alleviated by conducting the testing in two stages: conformance testing and then interoperability testing. In conformance testing, systems are tested independently against a reference system. In interoperability testing, they are tested simultaneously against one another. In the traditional approach for testing, these two stages are performed sequentially with little feedback between them. In addition, test results and test traces are left only to human analysis or even discarded if the solution passes the test. This paper proposes an approach where test results and traces from both the conformance and interoperability tests are analyzed for potential interoperability issues; conformance test cases are then derived from the analysis. The result is that more interoperability issues can be resolved in the lower-cost conformance testing mode; consequently, time and cost required for achieving interoparble solutions are reduced.

A possible alternative to the error prone modified Hodge test to correctly identify the carbapenemase producing Gram-negative bacteria

Directory of Open Access Journals (Sweden)

S S Jeremiah

2014-01-01

Full Text Available Context: The modified Hodge test (MHT is widely used as a screening test for the detection of carbapenemases in Gram-negative bacteria. This test has several pitfalls in terms of validity and interpretation. Also the test has a very low sensitivity in detecting the New Delhi metallo-β-lactamase (NDM. Considering the degree of dissemination of the NDM and the growing pandemic of carbapenem resistance, a more accurate alternative test is needed at the earliest. Aims: The study intends to compare the performance of the MHT with the commercially available Neo-Sensitabs - Carbapenemases/Metallo-β-Lactamase (MBL Confirmative Identification pack to find out whether the latter could be an efficient alternative to the former. Settings and Design: A total of 105 isolates of Klebsiella pneumoniae resistant to imipenem and meropenem, collected prospectively over a period of 2 years were included in the study. Subjects and Methods: The study isolates were tested with the MHT, the Neo-Sensitabs - Carbapenemases/MBL Confirmative Identification pack and polymerase chain reaction (PCR for detecting the blaNDM-1 gene. Results: Among the 105 isolates, the MHT identified 100 isolates as carbapenemase producers. In the five isolates negative for the MHT, four were found to produce MBLs by the Neo-Sensitabs. The Neo-Sensitabs did not have any false negatives when compared against the PCR. Conclusions: The MHT can give false negative results, which lead to failure in detecting the carbapenemase producers. Also considering the other pitfalls of the MHT, the Neo-Sensitabs - Carbapenemases/MBL Confirmative Identification pack could be a more efficient alternative for detection of carbapenemase production in Gram-negative bacteria.

Stratified Mucin-Producing Intraepithelial Lesion of the Cervix: Subtle Features Not to Be Missed.

Science.gov (United States)

Schwock, Joerg; Ko, Hyang Mi; Dubé, Valérie; Rouzbahman, Marjan; Cesari, Matthew; Ghorab, Zeina; Geddie, William R

2016-01-01

Stratified mucin-producing intraepithelial lesion (SMILE) is an uncommon premalignant lesion of the uterine cervix. A detailed examination of preinvasive SMILE cases including a comparison of the cytologic features with usual-type adenocarcinoma in situ (AIS) and human papillomavirus (HPV) genotyping was performed. Excisions and preceding Papanicolaou (Pap) tests were retrieved from the files of 2 tertiary care centers. Histologic review estimated the lesional SMILE proportion. Pap tests were reviewed and assessed for architectural, cellular and background features. Cobas® HPV test was performed. 13 cases were identified. Mean/median patient age was 35/33 years (range 23-51 years). Concurrent high-grade squamous intraepithelial lesion was found in 10/13 (77%) and AIS in 8/13 (62%) cases. In 6 cases, SMILE was dominant (≥50%) and represented in 5/6 corresponding Pap tests. Cytology interpretations differed more often in the SMILE-dominant group (p < 0.05). SMILE and AIS had overlapping features. Feathering and prominent nucleoli were absent in SMILE. HPV DNA was detected in all 12 cases tested. HPV 18 was most common (7/12). Excisions with positive/suspicious margins were reported in 5/6 SMILE-dominant versus 3/7 nondominant cases. SMILE is best considered as an AIS variant for cytologic, etiologic and management purposes. Cytologic features overlap with AIS, but are more subtle and easily missed. HPV testing may play a role in facilitating SMILE detection. © 2016 S. Karger AG, Basel.

Adrenocorticotropic hormone-producing pheochromocytoma: analysis of clinical cases

Directory of Open Access Journals (Sweden)

Evgeniya Ivanovna Marova

2015-04-01

Full Text Available Ectopic secretion of ACTH from non-pituitary tumors, referred to as ectopic ACTH syndrome (EAS, accounts for about 10–20% of Cushing’s syndrome (CS. Ectopic hormone-secreting pheochromocytomas (Pheo are rare. The first publication of association between pheochromocytoma and Cushing’s syndrome by Roux is dated 1955. Pheochromocytoma represents a rare cause of hypercortisolism, accounting for less than 5 % of ectopic Cushing’s syndrome while less than 1 % of pheochromocytomas is accompanied by Cushing’s syndrome. We are reporting 4 cases of ACTH-secreting pheochromocytoma presenting as Cushing’s syndrome. Data from 4 patients were analysed. There were 4 women from 50 to 63 years old. All patients had a clinical presentation of hypercorticoidism. Their levels of adrenocorticotropic hormone in plasma, 24-hour urinary free cortisol and urinary catecholamine were high. Computed tomography scan of the abdomen in all cases revealed a mass in the left adrenal gland. Left sided adrenalectomy was performed under treatment with a-blocker doxazosin and b-blocker atenolol. Histological examination revealed in 3 cases – pheocromocytoma and in 1 case corticomedullary mixed tumor of the adrenal gland. Additional immunostaining (IHCof these tumors showed positive immunostaining for chromogranin and ACTH. The IHC search for somatostatin receptors of subtype 2 and 5 (SSTR2, SSTR5 was performed in 3 cases and showed predominately expression SSTR2. The case index of Ki-67 ranged, from 0,5 to 4%. Biochemical signs of hypercortisolism rapidly began to disappear after surgery. Follow up of the patients during the next 2 years on average was with disease remission.

Producing a compound Nucleus via Inelastic Scattering: The 90Zr(alpha,alpha')90Zr* Case

Energy Technology Data Exchange (ETDEWEB)

Escher, J E; Dietrich, F S

2008-05-23

In a Surrogate reaction a compound nucleus is produced via a direct reaction (pickup, stripping, or inelastic scattering). For a proper application of the Surrogate approach it is necessary to predict the resulting angular momentum and parity distribution in the compound nucleus. A model for determining these distributions is developed for the case of inelastic alpha scattering off a spherical nucleus. The focus is on obtaining a first, simple description of the direct-reaction process that produces the compound nucleus and on providing the basis for a more complete treatment of the problem. The approximations employed in the present description are discussed and the extensions required for a more rigorous treatment of the problem are outlined. To illustrate the formalism, an application to {sup 90}Zr({alpha},{alpha}{prime}){sup 90}Zr* is presented.

Negative Exercise Stress Test: Does it Mean Anything? Case study

Directory of Open Access Journals (Sweden)

Hassan A. Mohamed

2007-01-01

Full Text Available Despite its low sensitivity and specificity (67% and 72%, respectively, exercise testing has remained one of the most widely used noninvasive tests to determine the prognosis in patients with suspected or established coronary disease.As a screening test for coronary artery disease, the exercise stress test is useful in that it is relatively simple and inexpensive. It has been considered particularly helpful in patients with chest pain syndromes who have moderate probability for coronary artery disease, and in whom the resting electrocardiogram (ECG is normal. The following case presentation and discussion will question the predictive value of a negative stress testing in patients with moderate probability for coronary artery disease.

Making System Dynamics Cool II : New Hot Teaching and Testing Cases of Increasing Complexity

NARCIS (Netherlands)

Pruyt, E.

2010-01-01

This follow-up paper presents several actual cases for testing and teaching System Dynamics. The cases were developed between April 2009 and January 2010 for the Introductory System Dynamics courses at Delft University of Technology in the Netherlands. They can be used for teaching and testing

Veggie ISS Validation Test Results and Produce Consumption

Science.gov (United States)

Massa, Gioia; Hummerick, Mary; Spencer, LaShelle; Smith, Trent

2015-01-01

The Veggie vegetable production system flew to the International Space Station (ISS) in the spring of 2014. The first set of plants, Outredgeous red romaine lettuce, was grown, harvested, frozen, and returned to Earth in October. Ground control and flight plant tissue was sub-sectioned for microbial analysis, anthocyanin antioxidant phenolic analysis, and elemental analysis. Microbial analysis was also performed on samples swabbed on orbit from plants, Veggie bellows, and plant pillow surfaces, on water samples, and on samples of roots, media, and wick material from two returned plant pillows. Microbial levels of plants were comparable to ground controls, with some differences in community composition. The range in aerobic bacterial plate counts between individual plants was much greater in the ground controls than in flight plants. No pathogens were found. Anthocyanin concentrations were the same between ground and flight plants, while antioxidant and phenolic levels were slightly higher in flight plants. Elements varied, but key target elements for astronaut nutrition were similar between ground and flight plants. Aerobic plate counts of the flight plant pillow components were significantly higher than ground controls. Surface swab samples showed low microbial counts, with most below detection limits. Flight plant microbial levels were less than bacterial guidelines set for non-thermostabalized food and near or below those for fungi. These guidelines are not for fresh produce but are the closest approximate standards. Forward work includes the development of standards for space-grown produce. A produce consumption strategy for Veggie on ISS includes pre-flight assessments of all crops to down select candidates, wiping flight-grown plants with sanitizing food wipes, and regular Veggie hardware cleaning and microbial monitoring. Produce then could be consumed by astronauts, however some plant material would be reserved and returned for analysis. Implementation of

Integrating non-animal test information into an adaptive testing strategy - skin sensitization proof of concept case.

Science.gov (United States)

Jaworska, Joanna; Harol, Artsiom; Kern, Petra S; Gerberick, G Frank

2011-01-01

There is an urgent need to develop data integration and testing strategy frameworks allowing interpretation of results from animal alternative test batteries. To this end, we developed a Bayesian Network Integrated Testing Strategy (BN ITS) with the goal to estimate skin sensitization hazard as a test case of previously developed concepts (Jaworska et al., 2010). The BN ITS combines in silico, in chemico, and in vitro data related to skin penetration, peptide reactivity, and dendritic cell activation, and guides testing strategy by Value of Information (VoI). The approach offers novel insights into testing strategies: there is no one best testing strategy, but the optimal sequence of tests depends on information at hand, and is chemical-specific. Thus, a single generic set of tests as a replacement strategy is unlikely to be most effective. BN ITS offers the possibility of evaluating the impact of generating additional data on the target information uncertainty reduction before testing is commenced.

Reduction in language testing

DEFF Research Database (Denmark)

Dimova, Slobodanka; Jensen, Christian

2013-01-01

/video recorded speech samples and written reports produced by two experienced raters after testing. Our findings suggest that reduction or reduction-like pronunciation features are found in tested L2 speech, but whenever raters identify and comment on such reductions, they tend to assess reductions negatively......This study represents an initial exploration of raters' comments and actual realisations of form reductions in L2 test speech performances. Performances of three L2 speakers were selected as case studies and illustrations of how reductions are evaluated by the raters. The analysis is based on audio...

IPRT polarized radiative transfer model intercomparison project - Three-dimensional test cases (phase B)

Science.gov (United States)

Emde, Claudia; Barlakas, Vasileios; Cornet, Céline; Evans, Frank; Wang, Zhen; Labonotte, Laurent C.; Macke, Andreas; Mayer, Bernhard; Wendisch, Manfred

2018-04-01

Initially unpolarized solar radiation becomes polarized by scattering in the Earth's atmosphere. In particular molecular scattering (Rayleigh scattering) polarizes electromagnetic radiation, but also scattering of radiation at aerosols, cloud droplets (Mie scattering) and ice crystals polarizes. Each atmospheric constituent produces a characteristic polarization signal, thus spectro-polarimetric measurements are frequently employed for remote sensing of aerosol and cloud properties. Retrieval algorithms require efficient radiative transfer models. Usually, these apply the plane-parallel approximation (PPA), assuming that the atmosphere consists of horizontally homogeneous layers. This allows to solve the vector radiative transfer equation (VRTE) efficiently. For remote sensing applications, the radiance is considered constant over the instantaneous field-of-view of the instrument and each sensor element is treated independently in plane-parallel approximation, neglecting horizontal radiation transport between adjacent pixels (Independent Pixel Approximation, IPA). In order to estimate the errors due to the IPA approximation, three-dimensional (3D) vector radiative transfer models are required. So far, only a few such models exist. Therefore, the International Polarized Radiative Transfer (IPRT) working group of the International Radiation Commission (IRC) has initiated a model intercomparison project in order to provide benchmark results for polarized radiative transfer. The group has already performed an intercomparison for one-dimensional (1D) multi-layer test cases [phase A, 1]. This paper presents the continuation of the intercomparison project (phase B) for 2D and 3D test cases: a step cloud, a cubic cloud, and a more realistic scenario including a 3D cloud field generated by a Large Eddy Simulation (LES) model and typical background aerosols. The commonly established benchmark results for 3D polarized radiative transfer are available at the IPRT website (http

Incidence of tuberculosis and the predictive value of ELISPOT and Mantoux tests in Gambian case contacts.

Directory of Open Access Journals (Sweden)

Philip C Hill

2008-01-01

Full Text Available Studies of Tuberculosis (TB case contacts are increasingly being utilised for understanding the relationship between M. tuberculosis and the human host and for assessing new interventions and diagnostic tests. We aimed to identify the incidence rate of new TB cases among TB contacts and to relate this to their initial Mantoux and ELISPOT test results.After initial Mantoux and ELISPOT tests and exclusion of co-prevalent TB cases, we followed 2348 household contacts of sputum smear positive TB cases. We visited them at 3 months, 6 months, 12 months, 18 months and 24 months, and investigated those with symptoms consistent with TB. Those who were diagnosed separately at a government clinic had a chest x-ray. Twenty six contacts were diagnosed with definite TB over 4312 person years of follow-up (Incidence rate 603/100,000 person years; 95% Confidence Interval, 370-830. Nine index and secondary case pairs had cultured isolates available for genotyping. Of these, 6 pairs were concordant and 3 were discordant. 2.5% of non-progressors were HIV positive compared to 12% of progressors (HR 6.2; 95% CI 1.7-22.5; p = 0.010. 25 secondary cases had initial Mantoux results, 14 (56% were positive ; 21 had initial ELISPOT results, 11 (52% were positive; 15 (71% of 21 tested were positive by one or the other test. Of the 6 contacts who had concordant isolates with their respective index case, 4 (67% were Mantoux positive at recruitment, 3 (50% were ELISPOT positive; 5 (83% were positive by one or other of the two tests. ELISPOT positive contacts, and those with discordant results, had a similar rate of progression to those who were Mantoux positive. Those negative on either or both tests had the lowest rate of progression.The incidence rate of TB disease in Gambian TB case contacts, after screening for co-prevalent cases, was 603/100,000 person years. Since initial ELISPOT test and Mantoux tests were each positive in only just over half of cases, but 71% were

Dynamics of quality as a strategic variable in complex food supply chain network competition: The case of fresh produce

Science.gov (United States)

Nagurney, Anna; Besik, Deniz; Yu, Min

2018-04-01

In this paper, we construct a competitive food supply chain network model in which the profit-maximizing producers decide not only as to the volume of fresh produce produced and distributed using various supply chain network pathways, but they also decide, with the associated costs, on the initial quality of the fresh produce. Consumers, in turn, respond to the various producers' product outputs through the prices that they are willing to pay, given also the average quality associated with each producer or brand at the retail outlets. The quality of the fresh produce is captured through explicit formulae that incorporate time, temperature, and other link characteristics with links associated with processing, shipment, storage, etc. Capacities on links are also incorporated as well as upper bounds on the initial product quality of the firms at their production/harvesting sites. The governing concept of the competitive supply chain network model is that of Nash Equilibrium, for which alternative variational inequality formulations are derived, along with existence results. An algorithmic procedure, which can be interpreted as a discrete-time tatonnement process, is then described and applied to compute the equilibrium produce flow patterns and accompanying link Lagrange multipliers in a realistic case study, focusing on peaches, which includes disruptions.

Viability of soybean seed produced under different agro-meteorological conditions in Vojvodina

Directory of Open Access Journals (Sweden)

Vujaković Milka

2011-01-01

Full Text Available At the time of soybean seed sowing in the field, a high soil moisture, low soil and air temperatures, and crasts formation may occur, which can lead to slow germination, poor seedling establishment, and in some cases to loss of seed vigor. Due to the importance and prevalence of soybean the aim of this study was to determine the quality and seed viability of different genotypes produced at three locations in Vojvodina during 2009 and 2010. Eight soybean varieties (Afrodita, Valjevka, Balkan, Novosadjanka, Ravnica, Ana, Vojvodjanka and Venera produced in Vrbas, Senta and Inđija during 2009 and 2010 were tested. Seed germination was determined using Standard laboratory test, and vigor tests (cold test, and accelerated aging test. Studied genotypes baheved differently in different years and at different localities. Genotype Venera achieved high germination values in all applied tests in 2009, while genotype Afrodita had high values of the tested parameter when conventional laboratory test was applied, and the lowest values were recorded when vigor tests were applied. Values obtained in 2010 when all tests were applied were above the prescribed minimum. Locality of Vrbas proved to be more favorable for seed production in relation to localities of Indjija and Senta due to better rainfall distribution.

Code cases for implementing risk-based inservice testing in the ASME OM code

International Nuclear Information System (INIS)

Rowley, C.W.

1996-01-01

Historically inservice testing has been reasonably effective, but quite costly. Recent applications of plant PRAs to the scope of the IST program have demonstrated that of the 30 pumps and 500 valves in the typical plant IST program, less than half of the pumps and ten percent of the valves are risk significant. The way the ASME plans to tackle this overly-conservative scope for IST components is to use the PRA and plant expert panels to create a two tier IST component categorization scheme. The PRA provides the quantitative risk information and the plant expert panel blends the quantitative and deterministic information to place the IST component into one of two categories: More Safety Significant Component (MSSC) or Less Safety Significant Component (LSSC). With all the pumps and valves in the IST program placed in MSSC or LSSC categories, two different testing strategies will be applied. The testing strategies will be unique for the type of component, such as centrifugal pump, positive displacement pump, MOV, AOV, SOV, SRV, PORV, HOV, CV, and MV. A series of OM Code Cases are being developed to capture this process for a plant to use. One Code Case will be for Component Importance Ranking. The remaining Code Cases will develop the MSSC and LSSC testing strategy for type of component. These Code Cases are planned for publication in early 1997. Later, after some industry application of the Code Cases, the alternative Code Case requirements will gravitate to the ASME OM Code as appendices

Code cases for implementing risk-based inservice testing in the ASME OM code

Energy Technology Data Exchange (ETDEWEB)

Rowley, C.W.

1996-12-01

Historically inservice testing has been reasonably effective, but quite costly. Recent applications of plant PRAs to the scope of the IST program have demonstrated that of the 30 pumps and 500 valves in the typical plant IST program, less than half of the pumps and ten percent of the valves are risk significant. The way the ASME plans to tackle this overly-conservative scope for IST components is to use the PRA and plant expert panels to create a two tier IST component categorization scheme. The PRA provides the quantitative risk information and the plant expert panel blends the quantitative and deterministic information to place the IST component into one of two categories: More Safety Significant Component (MSSC) or Less Safety Significant Component (LSSC). With all the pumps and valves in the IST program placed in MSSC or LSSC categories, two different testing strategies will be applied. The testing strategies will be unique for the type of component, such as centrifugal pump, positive displacement pump, MOV, AOV, SOV, SRV, PORV, HOV, CV, and MV. A series of OM Code Cases are being developed to capture this process for a plant to use. One Code Case will be for Component Importance Ranking. The remaining Code Cases will develop the MSSC and LSSC testing strategy for type of component. These Code Cases are planned for publication in early 1997. Later, after some industry application of the Code Cases, the alternative Code Case requirements will gravitate to the ASME OM Code as appendices.

Making System Dynamics Cool? Using Hot Testing & Teaching Cases

NARCIS (Netherlands)

Pruyt, E.

2009-01-01

This paper deals with the use of ‘hot’ real-world cases for both testing and teaching purposes such as in the Introductory System Dynamics course at Delft University of Technology in the Netherlands. The paper starts with a brief overview of the System Dynamics curriculum. Then the problem-oriented

A case study testing the cavity mode model of the magnetosphere

Directory of Open Access Journals (Sweden)

D. V. Sarafopoulos

2005-07-01

Full Text Available Based on a case study we test the cavity mode model of the magnetosphere, looking for eigenfrequencies via multi-satellite and multi-instrument measurements. Geotail and ACE provide information on the interplanetary medium that dictates the input parameters of the system; the four Cluster satellites monitor the magnetopause surface waves; the POLAR (L=9.4 and LANL 97A (L=6.6 satellites reveal two in-situ monochromatic field line resonances (FLRs with T=6 and 2.5 min, respectively; and the IMAGE ground magnetometers demonstrate latitude dependent delays in signature arrival times, as inferred by Sarafopoulos (2004b. Similar dispersive structures showing systematic delays are also extensively scrutinized by Sarafopoulos (2005 and interpreted as tightly associated with the so-called pseudo-FLRs, which show almost the same observational characteristics with an authentic FLR. In particular for this episode, successive solar wind pressure pulses produce recurring ionosphere twin vortex Hall currents which are identified on the ground as pseudo-FLRs. The BJN ground magnetometer records the pseudo-FLR (alike with the other IMAGE station responses associated with an intense power spectral density ranging from 8 to 12 min and, in addition, two discrete resonant lines with T=3.5 and 7 min. In this case study, even though the magnetosphere is evidently affected by a broad-band compressional wave originated upstream of the bow shock, nevertheless, we do not identify any cavity mode oscillation within the magnetosphere. We fail, also, to identify any of the cavity mode frequencies proposed by Samson (1992.

Keywords. Magnetospheric physics (Magnetosphereionosphere interactions; Solar wind-magnetosphere interactions; MHD waves and instabilities

Huntington's disease predictive testing: the case for an assessment approach to requests from adolescents.

Science.gov (United States)

Binedell, J; Soldan, J R; Scourfield, J; Harper, P S

1996-01-01

Adolescents who are actively requesting Huntington's predictive testing of their own accord pose a dilemma to those providing testing. In the absence of empirical evidence as regards the impact of genetic testing on minors, current policy and guidelines, based on the ethical principles of non-maleficence and respect for individual autonomy and confidentiality, generally exclude the testing of minors. It is argued that adherence to an age based exclusion criterion in Huntington's disease predictive testing protocols is out of step with trends in UK case law concerning minors' consent to medical treatment. Furthermore, contributions from developmental psychology and research into adolescents' decision making competence suggest that adolescents can make informed choices about their health and personal lives. Criteria for developing an assessment approach to such requests are put forward and the implications of a case by case evaluation of competence to consent in terms of clinicians' tolerance for uncertainty are discussed. PMID:8950670

Discussions On Worst-Case Test Condition For Single Event Burnout

Science.gov (United States)

Liu, Sandra; Zafrani, Max; Sherman, Phillip

2011-10-01

This paper discusses the failure characteristics of single- event burnout (SEB) on power MOSFETs based on analyzing the quasi-stationary avalanche simulation curves. The analyses show the worst-case test condition for SEB would be using the ion that has the highest mass that would result in the highest transient current due to charge deposition and displacement damage. The analyses also show it is possible to build power MOSFETs that will not exhibit SEB even when tested with the heaviest ion, which have been verified by heavy ion test data on SEB sensitive and SEB immune devices.

Activity of beta-lactam beta-lactamase inhibitor combinations against extended spectrum beta-lactamase producing enterobacteriaceae in urinary isolates

International Nuclear Information System (INIS)

Iqbal, F.I.; Farooqi, B.J.

2012-01-01

Objective: To determine the susceptibility pattern of beta-lactam beta-lactamase inhibitor combinations against extended-spectrum beta-lactamase (ESBL) producing Enterobacteriaceae in urinary isolates. Study Design: Observational study. Place and Duration of Study: Ziauddin University Hospital, Karachi, from February to October 2008. Methodology: A total of 190 consecutive non-duplicate isolates of ESBL producing Enterobacteriaceae from urine samples of in-patients were included in the study. Urinary samples from out-patients, repeat samples and non-ESBL producing isolates were excluded. Detection of ESBL was carried out by double disk diffusion technique. Antimicrobial susceptibility testing was performed using modified Kirby Bauer's disk diffusion method according to CLSI guidelines. Statistical analysis was performed by SPSS version 10. Results: Of the 190 ESBL isolates tested, 88 cases (46.31%) were sensitive and 6 cases (3.15%) were resistant to all three combinations, the rest 96 cases (50.52%) were resistant to at least one of the combinations. Susceptibility pattern of cefoperazone/sulbactam, piperacillin/tazobactam, and amoxicillin/clavulanic acid was 95.26, 92.10, and 44.31 percent respectively. Conclusion: Cefoperazone/sulbactam exhibited the best activity against ESBL producing Enterobacteriaceae followed by piperacillin/tazobactam. Hospital antibiotic policies should be reviewed periodically to reduce the usage of extended spectrum cephalosporins and replace them with beta-lactam beta-lactamase inhibitor combinations agent for treating urinary tract infections. (author)

Mathematical Basis and Test Cases for Colloid-Facilitated Radionuclide Transport Modeling in GDSA-PFLOTRAN

Energy Technology Data Exchange (ETDEWEB)

Reimus, Paul William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-07-31

This report provides documentation of the mathematical basis for a colloid-facilitated radionuclide transport modeling capability that can be incorporated into GDSA-PFLOTRAN. It also provides numerous test cases against which the modeling capability can be benchmarked once the model is implemented numerically in GDSA-PFLOTRAN. The test cases were run using a 1-D numerical model developed by the author, and the inputs and outputs from the 1-D model are provided in an electronic spreadsheet supplement to this report so that all cases can be reproduced in GDSA-PFLOTRAN, and the outputs can be directly compared with the 1-D model. The cases include examples of all potential scenarios in which colloid-facilitated transport could result in the accelerated transport of a radionuclide relative to its transport in the absence of colloids. Although it cannot be claimed that all the model features that are described in the mathematical basis were rigorously exercised in the test cases, the goal was to test the features that matter the most for colloid-facilitated transport; i.e., slow desorption of radionuclides from colloids, slow filtration of colloids, and equilibrium radionuclide partitioning to colloids that is strongly favored over partitioning to immobile surfaces, resulting in a substantial fraction of radionuclide mass being associated with mobile colloids.

Real-Time Extended Interface Automata for Software Testing Cases Generation

Science.gov (United States)

Yang, Shunkun; Xu, Jiaqi; Man, Tianlong; Liu, Bin

2014-01-01

Testing and verification of the interface between software components are particularly important due to the large number of complex interactions, which requires the traditional modeling languages to overcome the existing shortcomings in the aspects of temporal information description and software testing input controlling. This paper presents the real-time extended interface automata (RTEIA) which adds clearer and more detailed temporal information description by the application of time words. We also establish the input interface automaton for every input in order to solve the problems of input controlling and interface covering nimbly when applied in the software testing field. Detailed definitions of the RTEIA and the testing cases generation algorithm are provided in this paper. The feasibility and efficiency of this method have been verified in the testing of one real aircraft braking system. PMID:24892080

Testing independence between two Poisson-generated multinomial variables in case-series and cohort studies.

Science.gov (United States)

Hocine, Mounia; Guillemot, Didier; Tubert-Bitter, Pascale; Moreau, Thierry

2005-12-30

In case-series or cohort studies, we propose a test of independence between the occurrences of two types of recurrent events (such as two repeated infections) related to an intermittent exposure (such as an antibiotic treatment). The test relies upon an extension of a recent method for analysing case-series data, in the presence of one type of recurrent event. The test statistic is derived from a bivariate Poisson generated-multinomial distribution. Simulations for checking the validity of the test concerning the type I error and the power properties are presented. The test is illustrated using data from a cohort on antibiotics bacterial resistance in schoolchildren. Copyright 2005 John Wiley & Sons, Ltd.

Phenotypic Tests for the Detection of β-Lactamase-Producing Enterobacteriaceae Isolated from Different Environments.

Science.gov (United States)

de Oliveira, Daniele V; Van Der Sand, Sueli T

2016-07-01

Some bacteria from the Enterobacteriaceae family are showing a significant capability to disseminate β-lactams resistance mechanisms among them, and these same mechanisms can be carried out from the hospital environment to superficial water. The aim of this study was to evaluate different phenotypic methods for the detection β-lactamases production by enterobacteria isolated from the anthropogenic environment: hospital wastewater and from a stream that cross the city of Porto Alegre. The applied tests were the modified Hodge test (MHT) and phenotypic tests with the following inhibitors: carbapenemase-phenylboronic acid (APB), metallo-β-lactamase-EDTA, AmpC β-lactamase-cloxacillin, and the confirmatory test for extended-spectrum β-lactamase (ESBL)-clavulanic acid. For this evaluation, 131 isolates were initially subjected to antibiogram using the following antimicrobials: cefotaxime (30 µg), cefpodoxime (10 μg), ceftazidime (30 µg), ertapenem (10 μg), meropenem (10 μg), and aztreonam (30 μg). After this first screening, 62 isolates showed a profile resistance for at least one antimicrobial. These isolates were subjected to all phenotypic tests. Of those, 40 isolates were positive for at least one phenotypic test. In MHT test, one isolate was positive and five were with inconclusive results. The results achieved with the inhibitors are as follows: APB 25/40 positive strains; EDTA 8/40 positive strains; and with CLOXA 2/40 positive strains. ESBL production was observed for 34/40 strains. This assessment shows a high level of bacteria which can produce enzymes that inactivate β-lactams present in the different environment like the stream waters and from the hospital settings.

Simulation of VVER MCCI reactor test case with ASTEC V2/MEDICIS computer code

International Nuclear Information System (INIS)

Stefanova, A.; Grudev, P.; Gencheva, R.

2011-01-01

This paper presents an application of the ASTEC v2, module MEDICIS for simulation of VVER Molten core concrete interaction test (MCCI) case without water injection. The main purpose of performed calculation is verification and improvement of module MEDICIS/ASTECv2 for better simulation of core concrete interaction processes. The VVER-1000 reference nuclear power plant was chosen as SARNET2 benchmark MCCI test-case. The initial conditions for MCCI test are taken after SBO scenario calculated with ASTEC version 1.3R2 by INRNE. (authors)

PedGenie: meta genetic association testing in mixed family and case-control designs

Directory of Open Access Journals (Sweden)

Allen-Brady Kristina

2007-11-01

Full Text Available Abstract Background- PedGenie software, introduced in 2006, includes genetic association testing of cases and controls that may be independent or related (nuclear families or extended pedigrees or mixtures thereof using Monte Carlo significance testing. Our aim is to demonstrate that PedGenie, a unique and flexible analysis tool freely available in Genie 2.4 software, is significantly enhanced by incorporating meta statistics for detecting genetic association with disease using data across multiple study groups. Methods- Meta statistics (chi-squared tests, odds ratios, and confidence intervals were calculated using formal Cochran-Mantel-Haenszel techniques. Simulated data from unrelated individuals and individuals in families were used to illustrate meta tests and their empirically-derived p-values and confidence intervals are accurate, precise, and for independent designs match those provided by standard statistical software. Results- PedGenie yields accurate Monte Carlo p-values for meta analysis of data across multiple studies, based on validation testing using pedigree, nuclear family, and case-control data simulated under both the null and alternative hypotheses of a genotype-phenotype association. Conclusion- PedGenie allows valid combined analysis of data from mixtures of pedigree-based and case-control resources. Added meta capabilities provide new avenues for association analysis, including pedigree resources from large consortia and multi-center studies.

Real-Time Extended Interface Automata for Software Testing Cases Generation

Directory of Open Access Journals (Sweden)

Shunkun Yang

2014-01-01

Full Text Available Testing and verification of the interface between software components are particularly important due to the large number of complex interactions, which requires the traditional modeling languages to overcome the existing shortcomings in the aspects of temporal information description and software testing input controlling. This paper presents the real-time extended interface automata (RTEIA which adds clearer and more detailed temporal information description by the application of time words. We also establish the input interface automaton for every input in order to solve the problems of input controlling and interface covering nimbly when applied in the software testing field. Detailed definitions of the RTEIA and the testing cases generation algorithm are provided in this paper. The feasibility and efficiency of this method have been verified in the testing of one real aircraft braking system.

High-dose calcium stimulation test in a case of insulinoma masquerading as hysteria.

Science.gov (United States)

Nakamura, Yoshio; Doi, Ryuichiro; Kohno, Yasuhiro; Shimono, Dai; Kuwamura, Naomitsu; Inoue, Koichi; Koshiyama, Hiroyuki; Imamura, Masayuki

2002-11-01

It is reported that some cases with insulinoma present with neuropsychiatric symptoms and are often misdiagnosed as psychosis. Here we report a case of insulinoma masquerading as hysteria, whose final diagnosis could be made using high-dose calcium stimulation test. A 28-yr-old woman was referred presenting with substupor, mutism, mannerism, restlessness, and incoherence. Laboratory examinations revealed hypoglycemia (33 mg/dL) and detectable insulin levels (9.7 microU/mL), suggesting the diagnosis of insulinoma. However, neither imaging studies nor selective arterial calcium injection (SACI) test with a conventional dose of calcium (0.025 mEq/kg) indicated the tumor. High-dose calcium injection (0.05 mEq/kg) evoked insulin secretion when injected into superior mesenteric artery. A solitary tumor in the head of the pancreas was resected, and her plasma glucose returned to normal. Postoperatively, iv injection of secretin resulted in a normal response of insulin, which was not found preoperatively. This case suggests the usefulness of the SACI test with high-dose of calcium in the case of insulinoma when the standard dose fails to detect such a tumor.

Diagnostic tests based on human basophils

DEFF Research Database (Denmark)

Kleine-Tebbe, Jörg; Erdmann, Stephan; Knol, Edward F

2006-01-01

-maximal responses, termed 'intrinsic sensitivity'. These variables give rise to shifts in the dose-response curves which, in a diagnostic setting where only a single antigen concentration is employed, may produce false-negative data. Thus, in order to meaningfully utilize the current basophil activation tests....... Diagnostic studies using CD63 or CD203c in hymenoptera, food and drug allergy are critically discussed. Basophil-based tests are indicated for allergy testing in selected cases but should only be performed by experienced laboratories....

[Experience with Pregnosticon-planotest, a 2-minute immunologic pregnancy test].

Science.gov (United States)

Hancsók, M; Huber, G; Páhoki, I; Czeizel, E

1969-08-23

Pregnosticon-Planotest (PPT), produced by N.V. Organon, is an immunological latex-suspension pregnancy test that can be read in 2 minutes (or up to 60 minutes) and requires no special equipment such as centrifuges. Parallel pregnancy tests, using PPT and the biological Galli-Mainin Reaction (GMR) were carried out on 381 women for a total of 407 tests. The cases included 334 possible early pregnancies, 38 supected extrauterine pregnancies, and 35 suspected fetal deaths. The 2 tests agreed in 93.9% of the cases, and of 23 cases on which results differed, the PPT reading proved correct for 21 cases. Both tests gave false-negative readings for 36 early pregnancies and 1 extrauterine pregnancy. However, PPT results were correct for 80% of the extrauterine pregnancies (where production of human chorionic gonadotropin, the substance tested for, is low); the GMR was correct in 68.8% of these cases. The sensitivity of PPT was also shown in its early detection of pregnancies - 3.3-4 days earlier than with GMR. PPT is thus judged to be a sensitive, reliable, simple, and quick pregnancy test.

Sport-specific fitness testing and intervention for an adolescent with cerebral palsy: a case report.

Science.gov (United States)

Kenyon, Lisa K; Sleeper, Mark D; Tovin, Melissa M

2010-01-01

This case report describes the development, implementation, and outcomes of a fitness-related intervention program that addressed the sport-specific goals of an adolescent with cerebral palsy. The participant in this case was a 16-year-old African American male with spastic diplegia. The participant joined his high school wrestling team and asked to focus his physical therapy on interventions that would improve his wrestling performance. An examination was performed using the muscle power sprint test, the 10 x 5-m sprint test, strength tests, the 10-m shuttle run test, and the Gross Motor Function Measure. The intervention consisted of interval training, which focused on the demands of wrestling. Scores on all tests and measures were higher after the intervention. The outcomes of this case report seem to support the use of a fitness-related intervention program for addressing the sport-specific goals of an adolescent with cerebral palsy.

[Distiller Yeasts Producing Antibacterial Peptides].

Science.gov (United States)

Klyachko, E V; Morozkina, E V; Zaitchik, B Ts; Benevolensky, S V

2015-01-01

A new method of controlling lactic acid bacteria contamination was developed with the use of recombinant Saccharomyces cerevisiae strains producing antibacterial peptides. Genes encoding the antibacterial peptides pediocin and plantaricin with codons preferable for S. cerevisiae were synthesized, and a system was constructed for their secretory expression. Recombinant S. cerevisiae strains producing antibacterial peptides effectively inhibit the growth of Lactobacillus sakei, Pediacoccus pentasaceus, Pediacoccus acidilactici, etc. The application of distiller yeasts producing antibacterial peptides enhances the ethanol yield in cases of bacterial contamination. Recombinant yeasts producing the antibacterial peptides pediocin and plantaricin can successfully substitute the available industrial yeast strains upon ethanol production.

Comparisons of fully automated syphilis tests with conventional VDRL and FTA-ABS tests.

Science.gov (United States)

Choi, Seung Jun; Park, Yongjung; Lee, Eun Young; Kim, Sinyoung; Kim, Hyon-Suk

2013-06-01

Serologic tests are widely used for the diagnosis of syphilis. However, conventional methods require well-trained technicians to produce reliable results. We compared automated nontreponemal and treponemal tests with conventional methods. The HiSens Auto Rapid Plasma Reagin (AutoRPR) and Treponema Pallidum particle agglutination (AutoTPPA) tests, which utilize latex turbidimetric immunoassay, were assessed. A total of 504 sera were assayed by AutoRPR, AutoTPPA, conventional VDRL and FTA-ABS. Among them, 250 samples were also tested by conventional TPPA. The concordance rate between the results of VDRL and AutoRPR was 67.5%, and 164 discrepant cases were all VDRL reactive but AutoRPR negative. In the 164 cases, 133 showed FTA-ABS reactivity. Medical records of 106 among the 133 cases were reviewed, and 82 among 106 specimens were found to be collected from patients already treated for syphilis. The concordance rate between the results of AutoTPPA and FTA-ABS was 97.8%. The results of conventional TPPA and AutoTPPA for 250 samples were concordant in 241 cases (96.4%). AutoRPR showed higher specificity than that of VDRL, while VDRL demonstrated higher sensitivity than that of AutoRPR regardless of whether the patients had been already treated for syphilis or not. Both FTA-ABS and AutoTPPA showed high sensitivities and specificities greater than 98.0%. Automated RPR and TPPA tests could be alternatives to conventional syphilis tests, and AutoRPR would be particularly suitable in treatment monitoring, since results by AutoRPR in cases after treatment became negative more rapidly than by VDRL. Copyright © 2013. Published by Elsevier Inc.

Dose Prediction for surface nuclear explosions: case studies for Semipalatinsk and Lop Nur tests

International Nuclear Information System (INIS)

Takada, Jun

2008-01-01

Dose prediction method RAPS after surface nuclear explosion has been developed by using the empirical dose function of USA nuclear test. This method which provides us external total dose, dose rate at any distant, at any time for any yield of nuclear explosion, is useful for radiation protection in case of nuclear events such as terrorism and nuclear war. The validity of RAPS has been confirmed by application to historical surface nuclear test explosions. The first test case study which was done for the first test explosion of the former USSR at the Semipalatinsk Nuclear Test Site on August 29th 1949, shows a good agreement with luminescence dosimetry on a brick. This dose prediction method was applied nuclear tests in Lop Nur. The results indicate dangerous nuclear radiation influences including fatal risk in the wide Uygur area. (author)

Co-infection of methicillin-resistant Staphylococcus epidermidis, methicillin-resistant Staphylococcus aureus and extended spectrum β-lactamase producing Escherichia coli in bovine mastitis--three cases reported from India.

Science.gov (United States)

Bandyopadhyay, Samiran; Samanta, Indranil; Bhattacharyya, Debaraj; Nanda, Pramod Kumar; Kar, Debasish; Chowdhury, Jayanta; Dandapat, Premanshu; Das, Arun Kumar; Batul, Nayan; Mondal, Bimalendu; Dutta, Tapan Kumar; Das, Gunjan; Das, Bikash Chandra; Naskar, Syamal; Bandyopadhyay, Uttam Kumar; Das, Suresh Chandra; Bandyopadhyay, Subhasish

2015-03-01

Emergence of antimicrobial resistance among bovine mastitis pathogens is the major cause of frequent therapeutic failure and a cause of concern for veterinary practitioners. This study describes intra-mammary infection of methicillin-resistant Staphylococcus epidermidis (MRSE), methicillin-resistant Staphylococcus aureus (MRSA) and extended spectrum β-lactamase (ESBL) producing Escherichia coli in two Holstein Friesian crossbred cows with subclinical mastitis and one non-descript cow with clinical mastitis in two different districts of West Bengal, India. In total, three MRSE, one MRSA and three ESBL producing E. coli were isolated from these cases. Both the crossbreds were detected with MRSE (HFSE1 and HFSE2) and ESBL producing E. coli (HFEC1 and HFEC2), whereas, simultaneous infection of three pathogens viz. MRSA (NDSA1), MRSE (NDSE1) and ESBL producing E. coli (NDEC1) was found in the non-descript cow. The methicillin-resistant isolates possessed mecA gene and exhibited resistance to various antibiotics such as amikacin, tetracycline and glycopeptides. The ESBL producers were positive for blaCTX-M and blaTEM genes; in addition, HFEC1 and HFEC2 were positive for blaSHV and possessed the genes for class I integron (int1), sulphonamide resistance (sul1), quinolone resistance (qnrS) and other virulence factors (papC, iucD and ESTA1). All the ESBL producers exhibited resistance to a variety of antibiotics tested including third- and fourth-generation cephalosporins and were also intermediately resistant to carbapenems. This is the first ever report on simultaneous occurrence of MRSE, MRSA and ESBL producing E. coli in bovine mastitis indicating a major concern for dairy industry and public health as well.

The stimulation of EL-4 cells to produce interleukin-2 and its potential use in immunocytotoxicity testing

International Nuclear Information System (INIS)

Lasek, W.; Steer, S.; Clothier, R.; Balls, M.

1989-01-01

The ability of EL-4 thymoma cells to produce interleukin-2 (IL-2) following exposure to phorbol-12-myristate 13-acetate (PMA) and Concanavalin A (Con A) has been studied in vitro using medium containing either 10% or 1% fetal calf serum (FCS). The potent stimulatory effect of PMA on IL-2 production by EL-4 cells has been confirmed by measuring 3H-thymidine incorporation by the IL-2-dependent T cell line, CTLL-2, in the presence of conditioned medium (CM) from stimulated cultures. EL-4 cells produced several times more IL-2 when cultured in medium containing 10% FCS than when only 1% FCS was present. Added together, PMA and Con A acted synergistically in some EL-4 cell cultures. The ability of E:-4 cells to produce IL-2 was maintained after further incubation without stimulants. CM with IL-2 activity from stimulated EL-4 cells could prove useful in immunotoxicity testing

Airside HVAC BESTEST. Adaptation of ASHRAE RP 865 Airside HVAC Equipment Modeling Test Cases for ASHRAE Standard 140. Volume 1, Cases AE101-AE445

Energy Technology Data Exchange (ETDEWEB)

Neymark, J. [J. Neymark & Associates, Golden, CO (United States); Kennedy, M. [Mike D. Kennedy, Inc., Townsend, WA (United States); Judkoff, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gall, J. [AAON, Inc., Tulsa, OK (United States); Knebel, D. [AAON, Inc., Tulsa, OK (United States); Henninger, R. [GARD Analytics, Inc., Arlington Heights, IL (United States); Witte, M. [GARD Analytics, Inc., Arlington Heights, IL (United States); Hong, T. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McDowell, T. [Thermal Energy System Specialists, Madison, WI (United States); Yan, D. [Tsinghua Univ., Beijing (China); Zhou, X. [Tsinghua Univ., Beijing (China)

2016-03-01

This report documents a set of diagnostic analytical verification cases for testing the ability of whole building simulation software to model the air distribution side of typical heating, ventilating and air conditioning (HVAC) equipment. These cases complement the unitary equipment cases included in American National Standards Institute (ANSI)/American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs, which test the ability to model the heat-transfer fluid side of HVAC equipment.

Chronological emergence of a class a carbapenemase-producing Enterobacter aerogenes in Taiwan

Directory of Open Access Journals (Sweden)

Zheng-Yi Huang

2014-01-01

Full Text Available This study reports the case of a 77-year-old, long-term, bedridden patient, with a nosocomial wound infection caused by a multidrug-resistant strain of Enterobacter aerogenes (E. aerogense. The isolate produced an Ambler-class A carbapenemase, which was demonstrated by the Modified Hodge test (MHT and a confirmatory inhibition test. However, no known carbapenemase genes were discovered in this isolate by polymerase chain reactions (PCRs with specific primers. New carbapenemase or other resistant mechanisms could be explored from the isolate of carbapenem-resistant E. aerogense, according to the revised criteria (CLSI, 2012.

Automated Test Case Generation for an Autopilot Requirement Prototype

Science.gov (United States)

Giannakopoulou, Dimitra; Rungta, Neha; Feary, Michael

2011-01-01

Designing safety-critical automation with robust human interaction is a difficult task that is susceptible to a number of known Human-Automation Interaction (HAI) vulnerabilities. It is therefore essential to develop automated tools that provide support both in the design and rapid evaluation of such automation. The Automation Design and Evaluation Prototyping Toolset (ADEPT) enables the rapid development of an executable specification for automation behavior and user interaction. ADEPT supports a number of analysis capabilities, thus enabling the detection of HAI vulnerabilities early in the design process, when modifications are less costly. In this paper, we advocate the introduction of a new capability to model-based prototyping tools such as ADEPT. The new capability is based on symbolic execution that allows us to automatically generate quality test suites based on the system design. Symbolic execution is used to generate both user input and test oracles user input drives the testing of the system implementation, and test oracles ensure that the system behaves as designed. We present early results in the context of a component in the Autopilot system modeled in ADEPT, and discuss the challenges of test case generation in the HAI domain.

Gifted and Talented Education: A National Test Case in Peoria.

Science.gov (United States)

Fetterman, David M.

1986-01-01

This article presents a study of a program in Peoria, Illinois, for the gifted and talented that serves as a national test case for gifted education and minority enrollment. It was concluded that referral, identification, and selection were appropriate for the program model but that inequalities resulted from socioeconomic variables. (Author/LMO)

Agricultural residues as fuel for producer gas generation. Report from a test series with coconut shells, coconut husks, wheat straw and sugar cane

Energy Technology Data Exchange (ETDEWEB)

Hoeglund, C

1981-08-01

This paper reports on results from a series of tests with four different types of agricultural residues as fuel for producer gas generation. The fuels are coconut shells, coconut husks, pelletized wheat straw and pressed sugar cane. The tests were made with a 73 Hp agricultural tractor diesel engine equipped with a standard gasifier developed for wood chips in Sweden, and run on a testbed at the Swedish National Machinery Testing Institute. The engine was operated on approximately 10 per cent diesel oil and 90 per cent producer gas. The gas composition, its calorific value and temperature, the pressure drop and the engine power were monitored. Detailed elementary analysis of the fuel and gas were carried out. Observations were also made regarding the important aspects of bridging and slagging in the gasifier. The tests confirmed that coconut shells make an excellent fuel for producer gas generation. After 8 hours of running no problems with slags and bridging were experienced. Coconut husks showed no bridging but some slag formation. The gasifier operated satisfactorily for this fuel. Pelletized wheat straw and pressed sugar cane appeared unsuitable as fuel in the unmodified test gasifier (Type F 300) due to slag formation. It is important to note, however, that the present results are not optimal for any of the fuel used, the gasifier being designed for wood-chips and not for the test-fuels used. Tests using appropriately modified gasifiers are planned for the future.

Location tests for biomarker studies: a comparison using simulations for the two-sample case.

Science.gov (United States)

Scheinhardt, M O; Ziegler, A

2013-01-01

Gene, protein, or metabolite expression levels are often non-normally distributed, heavy tailed and contain outliers. Standard statistical approaches may fail as location tests in this situation. In three Monte-Carlo simulation studies, we aimed at comparing the type I error levels and empirical power of standard location tests and three adaptive tests [O'Gorman, Can J Stat 1997; 25: 269 -279; Keselman et al., Brit J Math Stat Psychol 2007; 60: 267- 293; Szymczak et al., Stat Med 2013; 32: 524 - 537] for a wide range of distributions. We simulated two-sample scenarios using the g-and-k-distribution family to systematically vary tail length and skewness with identical and varying variability between groups. All tests kept the type I error level when groups did not vary in their variability. The standard non-parametric U-test performed well in all simulated scenarios. It was outperformed by the two non-parametric adaptive methods in case of heavy tails or large skewness. Most tests did not keep the type I error level for skewed data in the case of heterogeneous variances. The standard U-test was a powerful and robust location test for most of the simulated scenarios except for very heavy tailed or heavy skewed data, and it is thus to be recommended except for these cases. The non-parametric adaptive tests were powerful for both normal and non-normal distributions under sample variance homogeneity. But when sample variances differed, they did not keep the type I error level. The parametric adaptive test lacks power for skewed and heavy tailed distributions.

DARPA Antibody Technology Program. Standardized Test Bed for Antibody Characterization: Characterization of an MS2 ScFv Antibody Produced by Illumina

Science.gov (United States)

2016-08-01

ECBC-TR-1395 DARPA ANTIBODY TECHNOLOGY PROGRAM STANDARDIZED TEST BED FOR... ANTIBODY CHARACTERIZATION: CHARACTERIZATION OF AN MS2 SCFV ANTIBODY PRODUCED BY ILLUMINA Patricia E. Buckley Alena M. Calm Heather Welsh Roy...4. TITLE AND SUBTITLE DARPA Antibody Technology Program Standardized Test Bed for Antibody Characterization: Characterization of an MS2 ScFv

Environmental implications of electricity purchase from independent power producers: a case study from Thailand

International Nuclear Information System (INIS)

Rabin Shrestha; Ram M Shrestha

2003-01-01

This paper analyses the effect on the environment of electricity purchase from independent power producers (IPPs) in the case of Thailand. The environmental implication is evaluated in terms of the net change in emission of air pollutants with electricity purchase from IPPs by a utility. The main finding of the study is that electricity purchase from a non-dispatchable IPP plant based on coal-fired generation would increase the net emissions compared with that without the purchase from IPPs. The study also shows that the lower plant factor of the IPP plant would also increase the emission of air pollutants. Furthermore, with non-dispatchable IPP plants, the total emission of air pollutants would increase, whereas with dispatchable IPP plants the total emission would decrease with the level of electricity purchases. (author)

Large block migration experiments: INTRAVAL phase 1, Test Case 9

Energy Technology Data Exchange (ETDEWEB)

Gureghian, A.B.; Noronha, C.J. (Battelle, Willowbrook, IL (USA). Office of Waste Technology Development); Vandergraaf, T.T. (Atomic Energy of Canada Ltd., Ottawa, ON (Canada))

1990-08-01

The development of INTRAVAL Test Case 9, as presented in this report, was made possible by a past subsidiary agreement to the bilateral cooperative agreement between the US Department of Energy (DOE) and Atomic Energy of Canada Limited (AECL) encompassing various aspects of nuclear waste disposal research. The experimental aspect of this test case, which included a series of laboratory experiments designed to quantify the migration of tracers in a single, natural fracture, was undertaken by AECL. The numerical simulation of the results of these experiments was performed by the Battelle Office of Waste Technology Development (OWTD) by calibrating an in-house analytical code, FRACFLO, which is capable of predicting radionuclide transport in an idealized fractured rock. Three tracer migration experiments were performed, using nonsorbing uranine dye for two of them and sorbing Cs-137 for the third. In addition, separate batch experiments were performed to determine the fracture surface and rock matrix sorption coefficients for Cs-137. The two uranine tracer migration experiment were used to calculate the average fracture aperture and to calibrate the model for the fracture dispersivity and matrix diffusion coefficient. The predictive capability of the model was then tested by simulating the third, Cs-137, tracer test without changing the parameter values determined from the other experiments. Breakthrough curves of both the experimental and numerical results obtained at the outlet face of the fracture are presented for each experiment. The reported spatial concentration profiles for the rock matrix are based solely on numerical predictions. 22 refs., 12 figs., 8 tabs.

Avoiding pitfalls in molecular genetic testing: case studies of high-resolution array comparative genomic hybridization testing in the definitive diagnosis of Mowat-Wilson syndrome.

Science.gov (United States)

Kluk, Michael Joseph; An, Yu; James, Philip; Coulter, David; Harris, David; Wu, Bai-Lin; Shen, Yiping

2011-05-01

The molecular testing options available for the diagnosis of genetic disorders are numerous and include a variety of different assay platforms. The consultative input of molecular pathologists and cytogeneticists, working closely with the ordering clinicians, is often important for definitive diagnosis. Herein, we describe two patients who had long histories of unexplained signs and symptoms with a high clinical suspicion of an underlying genetic etiology. Initial molecular testing in both cases was negative, but the application of high-resolution array comparative genomic hybridization technology lead to definitive diagnosis in both cases. We summarize the clinical findings and molecular testing in each case, discuss the differential diagnoses, and review the clinical and pathological findings of Mowat-Wilson syndrome. This report highlights the importance for those involved in molecular testing to know the nature of the underlying genetic abnormalities associated with the suspected diagnosis, to recognize the limitations of each testing platform, and to persistently pursue repeat testing using high-resolution technologies when indicated. This concept is applicable to both germline and somatic molecular genetic testing. Copyright © 2011 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

Allergic contact dermatitis caused by mushrooms. A case report and literature review.

Science.gov (United States)

Bruhn, J N; Soderberg, M D

1991-09-01

The first author is allergic to skin contact with mushrooms of Suillus americanus, S. granulatus, S. grevillei, S. luteus, or S. neoalbidipes. Symptoms develop between one and two days after contact and last for approximately a week, disappearing completely without treatment. Symptoms consist of reddening, swelling, and itching, at the sites of contact with pileus cuticle mucilage of all five species. Pore layer tissues (tested for S. americanus and S. luteus) also produced strong reactions, as did pileus trama (tested for S. luteus). Spores from spore prints (tested for S. americanus and S. luteus) produced no reaction. The reaction can be avoided by wearing gloves when handling allergic species and by washing hands promptly after working with these species. Similar cases, reported from North America, Europe, and Russia, involve Agaricus, Boletus, Lactarius, Paxillus, Ramaria, and Suillus species. Several cases involve allergy to multiple species or genera. Symptom severity varies, presumably with intensity of exposure. In one case, symptoms were renewed following ingestion. Most cases demonstrate delayed allergic contact sensitivity.

Modification of the BAX System PCR assay for detecting Salmonella in beef, produce, and soy protein isolate. Performance Tested Method 100201.

Science.gov (United States)

Peng, Linda X; Wallace, Morgan; Andaloro, Bridget; Fallon, Dawn; Fleck, Lois; Delduco, Dan; Tice, George

2011-01-01

The BAX System PCR assay for Salmonella detection in foods was previously validated as AOAC Research Institute (RI) Performance Tested Method (PTM) 100201. New studies were conducted on beef and produce using the same media and protocol currently approved for the BAX System PCR assay for E. coli O157:H7 multiplex (MP). Additionally, soy protein isolate was tested for matrix extension using the U.S. Food and Drug Administration-Bacteriological Analytical Manual (FDA-BAM) enrichment protocols. The studies compared the BAX System method to the U.S. Department of Agriculture culture method for detecting Salmonella in beef and the FDA-BAM culture method for detecting Salmonella in produce and soy protein isolate. Method comparison studies on low-level inoculates showed that the BAX System assay for Salmonella performed as well as or better than the reference method for detecting Salmonella in beef and produce in 8-24 h enrichment when the BAX System E. coli O157:H7 MP media was used, and soy protein isolate in 20 h enrichment with lactose broth followed by 3 h regrowth in brain heart infusion broth. An inclusivity panel of 104 Salmonella strains with diverse serotypes was tested by the BAX System using the proprietary BAX System media and returned all positive results. Ruggedness factors involved in the enrichment phase were also evaluated by testing outside the specified parameters, and none of the factors examined affected the performance of the assay.

Marketing strategies adopted by Romanian smartphones producers. Case study: Visual Fan

Directory of Open Access Journals (Sweden)

BOSCOR Dana

2017-01-01

Full Text Available The competition between smartphone producers at world level is increasing. The global players are threatened by smaller local producers from different foreign markets like China, India, Indonesia, Philippines and even Romania. An important element taken into account for the purchase of martphones is the reputation of producers for quality and reliability. Firms compete on quality, price and marketing. The present article presents the results of a research based on a focus group consisting of 16 Romanian students regarding their opinions on the quality of smartphones sold by the Romanian producer Visual Fan, with the brand Allview. The results of the study highlight that the company should continue to innovate and personalize its smartphones and should continue to compete with different products in all market segments.

Physical properties of sand parts produced using a Voxeljet VX1000 three-dimensional printer

Directory of Open Access Journals (Sweden)

Nyembwe, Kasongo

2016-11-01

Full Text Available Successful case studies of metal casting applications using sand moulds and cores produced by additive manufacturing (AM processes have been widely reported in the literature. The layered- based manufacturing process has revolutionised traditional sand moulding methods. This is essentially due to the numerous advantages of AM, including the reduction of design lead time and the ability to manufacture objects with complex geometry in a rapid turnaround time. Locally-available AM processes that are capable of producing sand moulds and cores include laser sintering (LS and three-dimensional printing (3DP, with the latter AM process growing in dominance over the former. However, a better understanding of the properties of parts produced by AM processes is required in order for the processes to be fully adopted by the foundry industry. Crucial characteristics of 3DP sand parts related to strength, dimensional accuracy, and hardness are not well- known in terms of their magnitude and in comparison with conventionally-moulded sand parts. In this investigation, the physical properties of test specimens produced under standard manufacturing conditions, using a Voxeljet VX1000 machine, were assessed for bend and tensile strength, hardness, friability, and surface finish. The physical properties of the 3DP test specimens were then compared with the properties of laboratory hand- rammed test specimens. The results of the investigation suggest that the properties of AM-fabricated sand parts are inferior to sand parts produced by conventional moulding processes.

Evidence of system: A network model case-study of seventh grade science assessment practices from classrooms to the state test

Science.gov (United States)

Piety, Philip John

With science education in the United States entering a period of greater accountability, this study investigated how student learning in science was assessed by educators within one state, asking what systemic assessment approaches existed and how the information from them was used. Conducted during the 20o6-2007 school year, this research developed and piloted a network-model case study design that included teachers, principals, administrators, and the state test development process, as well as several state-level professional associations. The data analyzed included observations, interviews, surveys, and both public and private documents. Some data were secondary. This design produced an empirical depiction of practice with a web of related cases. The network model expands on the hierarchical (nested) models often assumed in the growing literature on how information is used in educational contexts by showing multiple ways in which individuals are related through organizational structures. Seven case study teachers, each employing assessment methods largely unique and invisible to others in their schools, illustrate one set of assessment practices. The only alternative to classroom assessments that could be documented was the annual state accountability test. These two assessment species were neither tightly coupled nor distinct. Some teachers were partners in developing state test instruments, and in some cases the annual test could be seen as a school management resource. Boundary practices---activities where these two systems connected---were opportunities to identify challenges to policy implementation in science education. The challenges include standards, cognition, vocabulary, and classroom equipment. The boundary practices, along with the web of connections, provide the outlines of potential (and often unrealized) synergistic relationships. This model shows diverse indigenous practices and adaptations by actors responding to pressures of change and

Comparison of four microbiological inhibition tests for the screening of antimicrobial residues in the tissues of food-producing animals

Directory of Open Access Journals (Sweden)

Zuzana Gondová

2014-10-01

Full Text Available The study compares two existing microbiological inhibition tests, Screening Test for Antibiotic Residues (STAR and Premi®Test with two recently introduced tests, Nouws Antibiotic Test (NAT and Total Antibiotics for the screening of antimicrobial residues in the tissues of food-producing animals. In the negative or positive sample classification based on inhibition of the growth of test strain sensitive to many antibiotics and sulphonamides, out of 142 samples obtained from slaughterhouses and retail operations, 39 samples yielded a positive result in one or more tests: 4 samples in four tests, 14 samples in three tests, 13 samples in two tests, and 8 samples in one test. As for the numbers of observed positive samples, the descending sequence of tests was: STAR, Total Antibiotics, Premi®Test, NAT. The growth inhibition was observed in three out of seven test strains, namely Bacillus cereus ATCC 11778, Kocuria rhizophila ATCC 9341, and Bacillus stearothermophilus var. calidolactis. Considering the test strains sensitivity and no inhibition on the Bacillus pumilus NCIMB 10822 NAT test plates, our preliminary conclusion is that the animal samples are suspected for the presence of tetracycline, macrolide, and b-lactam antibiotics.

Excess cases of prostate cancer and estimated overdiagnosis associated with PSA testing in East Anglia

Science.gov (United States)

Pashayan, N; Powles, J; Brown, C; Duffy, S W

2006-01-01

This study aimed to estimate the extent of ‘overdiagnosis' of prostate cancer attributable to prostate-specific antigen (PSA) testing in the Cambridge area between 1996 and 2002. Overdiagnosis was defined conceptually as detection of prostate cancer through PSA testing that otherwise would not have been diagnosed within the patient's lifetime. Records of PSA tests in Addenbrookes Hospital were linked to prostate cancer registrations by NHS number. Differences in prostate cancer registration rates between those receiving and not receiving prediagnosis PSA tests were calculated. The proportion of men aged 40 years or over with a prediagnosis PSA test increased from 1.4 to 5.2% from 1996 to 2002. The rate of diagnosis of prostate cancer was 45% higher (rate ratios (RR)=1.45, 95% confidence intervals (CI) 1.02–2.07) in men with a history of prediagnosis PSA testing. Assuming average lead times of 5 to 10 years, 40–64% of the PSA-detected cases were estimated to be overdiagnosed. In East Anglia, from 1996 to 2000, a 1.6% excess of cases was associated with PSA testing (around a quarter of the 5.3% excess incidence cases observed in East Anglia from 1996 to 2000). Further quantification of the overdiagnosis will result from continued surveillance and from linkage of incidence to testing in other hospitals. PMID:16832417

Preclinical test: bacterial reverse mutation test for 18F-fluorocholine produced in CDTN

International Nuclear Information System (INIS)

Mendes, Bruno M.; Bispo, Ana Carolina A.; Campos, Danielle C.; Silva, Juliana B.

2013-01-01

The choline labeled with fluorine-18 (18FCH) is being considered as a great importance radiopharmaceutical due to its effective detection of many type of malignant neoplasm. The research related to 18 F-fluorocholine synthesis in CDTN was initiated in 2010. In order to obtain clinical research approval, as well as to register 18 FCH for marketing, safety and efficacy preclinical testing are required. The present work evaluated the 18 FCH genotoxic potential through the bacterial reverse mutation test (Ames test) using Salmonella typhimurium TA-98, TA-100, TA-1535 and TA-1537 strains and Escherichia coli WP2 uvrA strain. The reverse mutation test in bacteria for fluorcolina was conducted in two stages. Initially the method was applied to 'cold' fluorocholine molecule (19FCH). Subsequently, the decayed product of 18 FCH synthesis was evaluated. The first step was performed in order to examine the FCH molecule mutagenicity. The second was carried out to determine the mutagenic potential of final product. All strains were tested in triplicate for each exposure concentration, in the presence and absence of metabolic activation (S-9 mix - 10%). There were no statistically significant increases in revertant colonies rate for any strains tested after their exposure to decayed 18 FCH or 19 FCH. The number of revertant colonies in positive controls was significantly higher than that observed in significant increases in revertant colonies rate for any strains tested after their exposure to decayed 18 FCH or 19 FCH. The number of revertant colonies in positive controls was significantly higher than that observed in negative controls. Based on results of this assay, 18 FCH and 19 FCH, at tested doses, were found to be non-mutagenic in bacterial reverse mutation test. (author)

Reactor protection system software test-case selection based on input-profile considering concurrent events and uncertainties

International Nuclear Information System (INIS)

Khalaquzzaman, M.; Lee, Seung Jun; Cho, Jaehyun; Jung, Wondea

2016-01-01

Recently, the input-profile-based testing for safety critical software has been proposed for determining the number of test cases and quantifying the failure probability of the software. Input-profile of a reactor protection system (RPS) software is the input which causes activation of the system for emergency shutdown of a reactor. This paper presents a method to determine the input-profile of a RPS software which considers concurrent events/transients. A deviation of a process parameter value begins through an event and increases owing to the concurrent multi-events depending on the correlation of process parameters and severity of incidents. A case of reactor trip caused by feedwater loss and main steam line break is simulated and analyzed to determine the RPS software input-profile and estimate the number of test cases. The different sizes of the main steam line breaks (e.g., small, medium, large break) with total loss of feedwater supply are considered in constructing the input-profile. The uncertainties of the simulation related to the input-profile-based software testing are also included. Our study is expected to provide an option to determine test cases and quantification of RPS software failure probability. (author)

Couplex1 test case nuclear - Waste disposal far field simulation

International Nuclear Information System (INIS)

2001-01-01

This first COUPLEX test case is to compute a simplified Far Field model used in nuclear waste management simulation. From the mathematical point of view the problem is of convection diffusion type but the parameters are highly varying from one layer to another. Another particularity is the very concentrated nature of the source, both in space and in time. (author)

Risk factors for community-acquired urinary tract infections caused by ESBL-producing enterobacteriaceae--a case-control study in a low prevalence country.

Directory of Open Access Journals (Sweden)

Arne Søraas

Full Text Available Community-acquired urinary tract infection (CA-UTI is the most common infection caused by extended-spectrum β-lactamase (ESBL-producing Enterobacteriaceae, but the clinical epidemiology of these infections in low prevalence countries is largely unknown. A population based case-control study was conducted to assess risk factors for CA-UTI caused by ESBL-producing E. coli or K. pneumoniae. The study was carried out in a source population in Eastern Norway, a country with a low prevalence of infections caused by ESBL-producing Enterobacteriaceae. The study population comprised 100 cases and 190 controls with CA-UTI caused by ESBL-producing and non-ESBL-producing E. coli or K. pneumoniae, respectively. The following independent risk factors of ESBL-positive UTIs were identified: Travel to Asia, The Middle East or Africa either during the past six weeks (Odds ratio (OR = 21; 95% confidence interval (CI: 4.5-97 or during the past 6 weeks to 24 months (OR = 2.3; 95% CI: 1.1-4.4, recent use of fluoroquinolones (OR = 16; 95% CI: 3.2-80 and β-lactams (except mecillinam (OR = 5.0; 95% CI: 2.1-12, diabetes mellitus (OR = 3.2; 95% CI: 1.0-11 and recreational freshwater swimming the past year (OR = 2.1; 95% CI: 1.0-4.0. Factors associated with decreased risk were increasing number of fish meals per week (OR = 0.68 per fish meal; 95% CI: 0.51-0.90 and age (OR = 0.89 per 5 year increase; 95% CI: 0.82-0.97. In conclusion, we have identified risk factors that elucidate mechanisms and routes for dissemination of ESBL-producing Enterobacteriaceae in a low prevalence country, which can be used to guide appropriate treatment of CA-UTI and targeted infection control measures.

Case Management Reduces Length of Stay, Charges, and Testing in Emergency Department Frequent Users

Directory of Open Access Journals (Sweden)

Jameel Sughair

2018-02-01

Full Text Available Introduction: Case management is an effective, short-term means to reduce emergency department (ED visits in frequent users of the ED. This study sought to determine the effectiveness of case management on frequent ED users, in terms of reducing ED and hospital length of stay (LOS, accrued costs, and utilization of diagnostic tests. Methods: The study consisted of a retrospective chart review of ED and inpatient visits in our hospital’s ED case management program, comparing patient visits made in the one year prior to enrollment in the program, to the visits made in the one year after enrollment in the program. We examined the LOS, use of diagnostic testing, and monetary charges incurred by these patients one year prior and one year after enrollment into case management. Results: The study consisted of 158 patients in case management. Comparing the one year prior to enrollment to the one year after enrollment, ED visits decreased by 49%, inpatient admissions decreased by 39%, the use of computed tomography imaging decreased 41%, the use of ultrasound imaging decreased 52%, and the use of radiographs decreased 38%. LOS in the ED and for inpatient admissions decreased by 39%, reducing total LOS for these patients by 178 days. ED and hospital charges incurred by these patients decreased by 5.8 million dollars, a 41% reduction. All differences were statistically significant. Conclusion: Case management for frequent users of the ED is an effective method to reduce patient visits, the use of diagnostic testing, length of stay, and cost within our institution.

A comparative study of the typhidot (Dot-EIA) and Widal tests in blood culture positive cases of typhoid fever.

Science.gov (United States)

Khoharo, Haji Khan

2011-07-01

Seventy-six blood culture positive typhoid cases and forty-eight controls were studied. The typhidot test was positive in 74 (97.36%) cases, with a sensitivity, specificity and positive predictive value of 96%, 89.5%, and 95%, respectively, compared to the Widal test which was positive in 56 (73.68%) cases with a sensitivity, specificity, and positive predictive value of 72%, 87%, and 87%, respectively (P = 0.001). In the control group, seven (14.5%) cases tested positive for the Widal test and two (4.16%) for the typhidot (P = 0.001), yielding the sensitivity and specificity for the Widal test and the typhidot test of 63% and 83%, and 85% and 97%, respectively. We conclude that the Dot-EIA (enzyme immunoassay; typhidot) is a more sensitive and specific test which is easy to perform and more reliable compared to the Widal test and that it is useful in early therapy.

Unstandardized Measures: A Cross-Case Analysis of Test Prep in Two Urban

Science.gov (United States)

Kesler, Ted

2013-01-01

This article presents a cross-case analysis of two fourth-grade teachers' instruction while preparing their students for an English language arts test. Both teachers taught in high-needs urban public schools and were

Produced Water Reuse Considerations for In-Situ Recovery: a Case Development

Energy Technology Data Exchange (ETDEWEB)

Kus, J.; Card, R.

1984-01-01

Steam-assisted methods for in-situ recovery in Canada typically operate at steam to oil ratios of approximately 3 to 1 and generate in the order of 2 to 5 barrels of produced water per barrel of production. To raise the large quantities of steam required for reservoir stimulation, once-through type steam generators are most commonly used. They are typically designed to produce about 80 per cent quality steam from soft, oil-free feedwater. Suncor Inc operates a cyclic steam injection pilot project near Fort Kent, Alberta. In the early 1980s, Suncor planned an expansion of the 180 m/sup 3//d (1,130 bbl/d) facility to 800 m/sup 3//d (5,000 bbl/d). The expansion necessitated the development of a reliable water supply. Preliminary investigations into the feasibility of reusing produced water as the sole source of supply for the project expansion revealed this to be a costly and technically high risk option, given the specific produced water characteristics. As a result, an innovative alternative was developed to use a blend of produced water and municipal effluent from a nearby town as the water supply. This paper presents the rationale for the selection of this unique water supply and the process design considerations for the resulting water treatment system.

A test case of the deformation rate analysis (DRA) stress measurement method

Energy Technology Data Exchange (ETDEWEB)

Dight, P.; Hsieh, A. [Australian Centre for Geomechanics, Univ. of WA, Crawley (Australia); Johansson, E. [Saanio and Riekkola Oy, Helsinki (Finland); Hudson, J.A. [Rock Engineering Consultants (United Kingdom); Kemppainen, K.

2012-01-15

As part of Posiva's site and ONKALO investigations, the in situ rock stress has been measured by a variety of techniques, including hydraulic fracturing, overcoring, and convergence measurements. All these techniques involve direct measurements in a drillhole or at the rock surface. An alternative method is to test drillhole core in a way that enables estimation of the magnitudes and orientations of the in situ rock stress. The Kaiser Effect (KE) and Deformation Rate Analysis (DRA) are two ways to do this. In the work reported here, a 'blind' DRA test was conducted on core obtained from the POSE (Posiva's Olkiluoto Spalling Experiment) niche in the ONKALO. The term 'blind' means that the two first authors of this report, who conducted the tests at the Australian Centre for Geomechanics, did not know the depths below surface at which the cores had been obtained. The results of this DRA Test Case are presented, together with an explanation of the DRA procedure. Also, additional information that would help in such DRA testing and associated analysis is explained. One of the problems in comparing the DRA results with the known Olkiluoto stress field is that the latter is highly variable across the site, as experienced by the previous in situ stress measurements and as predicted by numerical analysis. The variability is mainly caused by the presence of the large brittle deformation zones which perturb the local stress state. However, this variability reduces with depth and the stress field becomes more stable at the {approx} 350 m at which the drillhole cores were obtained. Another compounding difficulty is that the stress quantity, being a second order tensor, requires six independent components for its specification. In other words, comparison of the DRA results and the known stress field requires comparison of six different quantities. In terms of the major principal stress orientation, the DRA results predict an orientation completely

A test case of the deformation rate analysis (DRA) stress measurement method

International Nuclear Information System (INIS)

Dight, P.; Hsieh, A.; Johansson, E.; Hudson, J.A.; Kemppainen, K.

2012-01-01

As part of Posiva's site and ONKALO investigations, the in situ rock stress has been measured by a variety of techniques, including hydraulic fracturing, overcoring, and convergence measurements. All these techniques involve direct measurements in a drillhole or at the rock surface. An alternative method is to test drillhole core in a way that enables estimation of the magnitudes and orientations of the in situ rock stress. The Kaiser Effect (KE) and Deformation Rate Analysis (DRA) are two ways to do this. In the work reported here, a 'blind' DRA test was conducted on core obtained from the POSE (Posiva's Olkiluoto Spalling Experiment) niche in the ONKALO. The term 'blind' means that the two first authors of this report, who conducted the tests at the Australian Centre for Geomechanics, did not know the depths below surface at which the cores had been obtained. The results of this DRA Test Case are presented, together with an explanation of the DRA procedure. Also, additional information that would help in such DRA testing and associated analysis is explained. One of the problems in comparing the DRA results with the known Olkiluoto stress field is that the latter is highly variable across the site, as experienced by the previous in situ stress measurements and as predicted by numerical analysis. The variability is mainly caused by the presence of the large brittle deformation zones which perturb the local stress state. However, this variability reduces with depth and the stress field becomes more stable at the ∼ 350 m at which the drillhole cores were obtained. Another compounding difficulty is that the stress quantity, being a second order tensor, requires six independent components for its specification. In other words, comparison of the DRA results and the known stress field requires comparison of six different quantities. In terms of the major principal stress orientation, the DRA results predict an orientation completely different to the NW-SE regional

A frame simulator for data produced by 'multi-accumulation' readout detectors

Science.gov (United States)

Bonoli, Carlotta; Bortoletto, Favio; Giro, Enrico; Corcione, Leonardo; Ligori, Sebastiano; Nicastro, Luciano

2010-07-01

A simulator of data frames produced by 'multi-accumulation' readout detectors has been developed during the feasibility study for the NIS spectrograph, part of the European Euclid mission. The software can emulate various readout strategies, allowing to compare the efficiency of different sampling techniques. Special care is given to two crucial aspects: the minimization of the noise and the effects produced by cosmic hits. The resulting readout noise is analyzed as a function of the background sources, detector native characteristics and readout strategy, while the image deterioration by cosmic rays covers the simulation of hits and their correction efficiency varying the readout modalities. Simulated "multi-accumulation" frames, typical of multiplexer based detectors, are an ideal tool for testing the efficiency of cosmic ray rejection techniques. In the present case cosmic rays are added to each raw frame conforming to the rates and energy expected in the operational L2 region and in the chosen exposure time. Procedures efficiency for cosmic ray identification and correction can also be easily tested in terms of memory occupancy and telemetry rates.

Successful application of technetium-99m-labeled octreotide acetate scintigraphy in the detection of ectopic adrenocorticotropin-producing bronchial carcinoid lung tumor: a case report

Directory of Open Access Journals (Sweden)

Fallahi Babak

2010-10-01

Full Text Available Abstract Introduction The diagnostic efficacy of somatostatin receptor scintigraphy labeling with 111 indium in the localization of tumors has been assessed in a limited number of patients with contradictory outcomes. Here, we describe the case of a patient with an ectopic adrenocorticotropic hormone-producing bronchial carcinoid tumor diagnosed preoperatively using technetium-99m-labeled octreotide acetate scintigraphy. Case presentation A 29-year-old Asian man presented to our hospital with the typical clinical features of Cushing's syndrome, which he had had for a duration of 18 months. The results of a biochemical evaluation revealed he had adrenocorticotropic hormone-dependent Cushing's syndrome. The results of a spiral abdominal computed tomography scan showed he had bilateral adrenal hypertrophy. A magnetic resonance image of the patient's brain showed he had a normal hypophysis. Whole body technetium-99m-labeled octreotide acetate scintigraphy was performed to check for the presence of an ectopic adrenocorticotropic hormone-producing tumor. The scan results showed a small focal increase in uptake in the lower lobe of our patient's right lung, just above his diaphragm. A spiral chest computed tomography scan also revealed a small non-specific lesion in the same region. A transthoracic biopsy was then performed. Pathological evaluation confirmed the diagnosis of a carcinoid tumor, of the adrenocorticotropic hormone-producing type. After surgical removal, the patient's symptoms resolved and significant clinical improvement was achieved. Conclusions This case report shows that technetium-99m-labeled octreotide acetate scintigraphy can effectively detect an ectopic adrenocorticotropic hormone-producing bronchial carcinoid.

Ballistic and Cyclic Rig Testing of Braided Composite Fan Case Structures

Science.gov (United States)

Watson, William R.; Roberts, Gary D.; Pereira, J. Michael; Braley, Michael S.

2015-01-01

FAA fan blade-out certification testing on turbofan engines occurs very late in an engine's development program and is very costly. It is of utmost importance to approach the FAA Certification engine test with a high degree of confidence that the containment structure will not only contain the high-energy debris, but that it will also withstand the cyclic loads that occur with engine spooldown and continued rotation as the non-running engine maintains a low rotor RPM due to forced airflow as the engine-out aircraft returns to an airport. Accurate rig testing is needed for predicting and understanding material behavior of the fan case structure during all phases of this fan blade-out event.

Pilot scale test of a produced water-treatment system for initial removal of organic compounds

Energy Technology Data Exchange (ETDEWEB)

Sullivan, Enid J [Los Alamos National Laboratory; Kwon, Soondong [UT-AUSTIN; Katz, Lynn [UT-AUSTIN; Kinney, Kerry [UT-AUSTIN

2008-01-01

A pilot-scale test to remove polar and non-polar organics from produced water was performed at a disposal facility in Farmington NM. We used surfactant-modified zeolite (SMZ) adsorbent beds and a membrane bioreactor (MBR) in combination to reduce the organic carbon content of produced water prior to reverse osmosis (RO). Reduction of total influent organic carbon (TOC) to 5 mg/L or less is desirable for efficient RO system operation. Most water disposed at the facility is from coal-bed gas production, with oil production waters intermixed. Up to 20 gal/d of produced water was cycled through two SMZ adsorbent units to remove volatile organic compounds (BTEX, acetone) and semivolatile organic compounds (e.g., napthalene). Output water from the SMZ units was sent to the MBR for removal of the organic acid component of TOC. Removal of inorganic (Mn and Fe oxide) particulates by the SMZ system was observed. The SMZ columns removed up to 40% of the influent TOC (600 mg/L). BTEX concentrations were reduced from the initial input of 70 mg/L to 5 mg/L by the SMZ and to an average of 2 mg/L after the MBR. Removal rates of acetate (input 120-170 mg/L) and TOC (input up to 45 mg/L) were up to 100% and 92%, respectively. The water pH rose from 8.5 to 8.8 following organic acid removal in the MBR; this relatively high pH was likely responsible for observed scaling of the MBR internal membrane. Additional laboratory studies showed the scaling can be reduced by metered addition of acid to reduce the pH. Significantly, organic removal in the MBR was accomplished with a very low biomass concentration of 1 g/L throughout the field trial. An earlier engineering evaluation shows produced water treatment by the SMZ/MBR/RO system would cost from $0.13 to $0.20 per bbl at up to 40 gpm. Current estimated disposal costs for produced water are $1.75 to $4.91 per bbl when transportation costs are included, with even higher rates in some regions. Our results suggest that treatment by an SMZ

Management of small producers waste in Slovenia

International Nuclear Information System (INIS)

Fabjan, Marija; Rojc, Joze

2007-01-01

Available in abstract form only. Full text of publication follows: Radioactive materials are extensively used in Slovenia in various fields and applications in medicine, industry and research. For the managing of radioactive waste raised from these establishments the Agency for radwaste management (ARAO) was authorised as the state public service of managing the radioactive waste in 1999. The public service of the radioactive waste of small producers in Slovenia is performed in line with the Governmental decree on the Mode, Subject and Terms of Performing the Public Service of Radioactive Waste Management (Official Gazette RS No. 32/99). According to the Decree the scope of the public service includes: 'collection of the waste from small producers at the producers' premises and its transportation to the storage facility for treatment, storing and disposal', 'acceptance of radioactive waste in case of emergency situation on the premises, in case of transport accidents or some other accidents', 'acceptance of radioactive waste in cases when the producer is unknown', 'management (collection, transport, pre-treatment, storing, together with QA and radiation protection measures) of radioactive waste', 'treatment and conditioning of radioactive waste for storing and disposal', and 'operating of the Central Interim Storage for LIL waste from small producers'. After taking over the performing of the public service, ARAO first started with the project for refurbishment and modernization of the Central Interim Storage Facility, including improvements of the storage utilization and rearrangement of the stored waste. (authors)

Susceptibility pattern of extended spectrum beta-lactamase producing isolates in various clinical specimens

International Nuclear Information System (INIS)

Roshan, M.

2011-01-01

Objective: To determine the susceptibility pattern of extended spectrum beta-lactamase (ESBL) producing Gram negative isolates from various clinical specimens. Study Design: Descriptive study. Place and Duration of Study: Microbiology Department, Armed Forces Institute of Pathology, Rawalpindi, from January 2008 to January 2009. Methodology: A total of 308 ESBL producing isolates from various clinical specimens sent to AFIP for culture and sensitivity were identified using standard microbiological techniques and tested for antimicrobial susceptibility. At the same time screening for ESBL production was also done. ESBL production was confirmed by combination disc synergy method. The susceptibility pattern of isolates was then recorded in frequency percentages. Results: Out of the 308 ESBL producing isolates more than 99% were susceptible to carbapenems, 84% to tazobactam/ piperacillin, 81% to sulbactam/cefoperazone, 12% to fluoroquinolones, 13% to cotrimoxazole, 59% to amikacin and 18% to gentamicin. Among the urinary isolates 49% were susceptible to Nitrofurontoin and only 5% to Pipemidic acid. Conclusion: Antibiotic choices in case of ESBL producing isolates are limited and at present only carbapenems can be regarded as treatment of choice. As empirical agents, beta-lactam/beta lactamase inhibitor combinations should be used cautiously for serious infections. Fluoroquinolones showed very poor efficacy. Amikacin can be used alternatively in such cases. Nitrofurantoin is still a good oral agent for treating UTI. (author)

Case of Meningitis in a Neonate Caused by an Extended-Spectrum-Beta-Lactamase-Producing Strain of Hypervirulent Klebsiella pneumoniae

Directory of Open Access Journals (Sweden)

Khalit S. Khaertynov

2017-08-01

Full Text Available Klebsiella pneumoniae is one of the most important infectious agents among neonates. This pathogen has a potential to develop an increased antimicrobial resistance and virulence. The classic non-virulent strain of K. pneumoniae, producing an extended-spectrum beta-lactamases (ESBL, is associated with nosocomial infection mainly in preterm neonates. Hypervirulent K. pneumoniae strains are associated with invasive infection among previously healthy ambulatory patients, and most of them exhibit antimicrobial susceptibility. During the last few years, several cases of diseases caused by hypervirulent K. pneumoniae producing ESBL have been registered in different geographical regions of the world. However, reports of such cases in neonates are rare. Here, we reported that this pathogen can cause pyogenic meningitis in full-term neonate with poor prognosis. A previously healthy, full-term, 12-day-old neonate was admitted to the infectious diseases hospital with suspected meningitis. The clinical symptoms included loss of appetite, irritability, fever, seizures, and a bulging anterior fontanelle. The analysis of the cerebrospinal fluid confirmed the diagnosis of meningitis. Blood and cerebrospinal fluid cultures were positive for K. pneumoniae, producing ESBL. K. pneumoniae isolates were resistant to aminopenicillins, 3rd generation cephalosporins but were sensitive to imipenem and meropenem. The “string test” was positive. The study of the virulence factors of K. pneumoniae by PCR revealed the presence of the rmpA gene. A combination of K. pneumoniae virulence and drug resistance complicated by cerebral oedema led to the death of the neonate. We concluded that both the risk of developing severe forms of infection and the outcome of the disease due to K. pneumonia are associated with the phenotypic features of the pathogen such as its antibiotic susceptibility and virulence factors. Emergence of the ESBL-producing strain of hypervirulent K

TESTING INFORMATIONAL EFFICIENCY: THE CASE OF U.E. AND BRIC EMERGENT MARKETS

OpenAIRE

OPREAN Camelia

2012-01-01

Empirical finance has brought together a considerable number of studies in determining the market efficiency in terms of information in the case of an emerging financial market. Conflicting results have been generated by these researches in efficient market hypothesis (EMH), so efficiency tests in the emerging financial markets are rarely definitive in reaching a conclusion about the existence of informational efficiency. This paper tests weak-form market efficiency of eight emerging markets:...

Relational Constraint Driven Test Case Synthesis for Web Applications

Directory of Open Access Journals (Sweden)

Xiang Fu

2010-09-01

Full Text Available This paper proposes a relational constraint driven technique that synthesizes test cases automatically for web applications. Using a static analysis, servlets can be modeled as relational transducers, which manipulate backend databases. We present a synthesis algorithm that generates a sequence of HTTP requests for simulating a user session. The algorithm relies on backward symbolic image computation for reaching a certain database state, given a code coverage objective. With a slight adaptation, the technique can be used for discovering workflow attacks on web applications.

Clinical patterns, epidemiology and risk factors of community-acquired urinary tract infection caused by extended-spectrum beta-lactamase producers: a prospective hospital case-control study.

Science.gov (United States)

Almomani, Basima A; Hayajneh, Wail A; Ayoub, Abeer M; Ababneh, Mera A; Al Momani, Miral A

2018-05-10

To assess incidence rate, risk factors and susceptibility patterns associated with extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli or Klebsiella pneumoniae in community-acquired urinary tract infections (CA-UTIs). A prospective, case-control study was conducted at a tertiary teaching hospital from Jan 2015 to Dec 2016. The results of microbiology cultures were initially screened to include only patients with positive E. coli or K. pneumoniae urine cultures. Afterwards, clinical symptoms were assessed to confirm the UTI. To investigate the risk factors, patients with a positive urine culture for ESBL-producing isolates were assigned as cases, while patients with non-ESBL were assigned as controls. Out of 591 patients included in this study, 57.5% (n = 340) were included in the control group and 42.5% (n = 251) were in the case group. The incidence rate of ESBL-producing isolates was 3.465 cases per 1000-patient hospital admissions. Male gender (OR = 1.856, 95% CI = 1.192-2.889, p = 0.006), pediatrics (OR = 1.676, 95% CI = 1.117-2.517, p = 0.013), patients with comorbidity (OR = 1.542, 95% CI = 1.029-2.312, p = 0.036) and UTI in the previous 12 months (OR = 1.705, 95% CI = 1.106-2.628, p = 0.016) were independently associated with a higher risk of infection. The resistance rate for most commonly prescribed antibiotics was high. Our results suggest that the incidence of ESBL producers among CA-UTIs is high. Male gender, pediatrics, comorbidity and UTI in the previous 12 months were associated with a higher risk for infection. Continuous surveillance and prudent antibiotic use by healthcare professionals are important factors for effective control of ESBL associated infections.

POEMS: a case study of an Italian wine-producing firm.

Science.gov (United States)

Ardente, Fulvio; Beccali, Giorgio; Cellura, Maurizio; Marvuglia, Antonino

2006-09-01

Over the last decade, researchers paid much attention to concepts such as Design for Environment, Extended Producer Responsibility, Responsible Chain Management, and Eco-design. Many management tools and standards (such as EMAS, ISO 14001, LCA, EPD, Ecolabel) have been developed to support companies in the evaluation and management of their environmental performance and to pursue continual environmental improvement. The more recent development of the aforesaid fields looks at interorganizational environmental management. Such an approach can complement the more traditional intraorganizational corporate environmental management approaches and tools. A typical example of this new trend is the Product Oriented Environmental Management System (POEMS), which represents the natural evolution of the above-mentioned tools, combining the features of EMS, EPD and Ecolabel. Although the structure of the POEMS is still not standardized, many experimental applications have yet been carried out in Europe. In developing a POEMS, a company needs to determine all of the environmental impacts caused at all life-cycle stages of the product and, ideally, to reduce all of them through a continual commitment. The aim of the present study was to perform a survey of the developed POEMS models and to analyze their peculiarities and drawbacks in the application to Small and Medium Enterprises. A case study regarding an Italian winery company is presented. The study analyzes the structure and the activities of the examined firm, in order to estimate direct and indirect environmental impacts following a life-cycle approach. The chosen functional unit is a 0.75-L bottle of red wine. The article also suggests some solutions to improve the environmental performances of the firm's products.

Disconfirmed hedonic expectations produce perceptual contrast, not assimilation.

Science.gov (United States)

Zellner, Debra A; Strickhouser, Dinah; Tornow, Carina E

2004-01-01

In studies of hedonic ratings, contrast is the usual result when expectations about test stimuli are produced through the presentation of context stimuli, whereas assimilation is the usual result when expectations about test stimuli are produced through labeling, advertising, or the relaying of information to the subject about the test stimuli. Both procedures produce expectations that are subsequently violated, but the outcomes are different. The present studies demonstrate that both assimilation and contrast can occur even when expectations are produced by verbal labels and the degree of violation of the expectation is held constant. One factor determining whether assimilation or contrast occurs appears to be the certainty of the expectation. Expectations that convey certainty are produced by methods that lead to social influence on subjects' ratings, producing assimilation. When social influence is not a factor and subjects give judgments influenced only by the perceived hedonic value of the stimulus, contrast is the result.

Detecting a Defective Casing Seal at the Top of a Bedrock Aquifer.

Science.gov (United States)

Richard, Sandra K; Chesnaux, Romain; Rouleau, Alain

2016-03-01

An improperly sealed casing can produce a direct hydraulic connection between two or more originally isolated aquifers with important consequences regarding groundwater quantity and quality. A recent study by Richard et al. (2014) investigated a monitoring well installed in a fractured rock aquifer with a defective casing seal at the soil-bedrock interface. A hydraulic short circuit was detected that produced some leakage between the rock and the overlying deposits. A falling-head permeability test performed in this well showed that the usual method of data interpretation is not valid in this particular case due to the presence of a piezometric error. This error is the direct result of the preferential flow originating from the hydraulic short circuit and the subsequent re-equilibration of the piezometric levels of both aquifers in the vicinity of the inlet and the outlet of the defective seal. Numerical simulations of groundwater circulation around the well support the observed impact of the hydraulic short circuit on the results of the falling-head permeability test. These observations demonstrate that a properly designed falling-head permeability test may be useful in the detection of defective casing seals. © 2015, National Ground Water Association.

CONFIDENCE LEVELS AND/VS. STATISTICAL HYPOTHESIS TESTING IN STATISTICAL ANALYSIS. CASE STUDY

Directory of Open Access Journals (Sweden)

ILEANA BRUDIU

2009-05-01

Full Text Available Estimated parameters with confidence intervals and testing statistical assumptions used in statistical analysis to obtain conclusions on research from a sample extracted from the population. Paper to the case study presented aims to highlight the importance of volume of sample taken in the study and how this reflects on the results obtained when using confidence intervals and testing for pregnant. If statistical testing hypotheses not only give an answer "yes" or "no" to some questions of statistical estimation using statistical confidence intervals provides more information than a test statistic, show high degree of uncertainty arising from small samples and findings build in the "marginally significant" or "almost significant (p very close to 0.05.

A comparison of geostatistically based inverse techniques for use in performance assessment analysis at the Waste Isolation Pilot Plant Site: Results from Test Case No. 1

International Nuclear Information System (INIS)

Zimmerman, D.A.; Gallegos, D.P.

1993-10-01

The groundwater flow pathway in the Culebra Dolomite aquifer at the Waste Isolation Pilot Plant (WIPP) has been identified as a potentially important pathway for radionuclide migration to the accessible environment. Consequently, uncertainties in the models used to describe flow and transport in the Culebra need to be addressed. A ''Geostatistics Test Problem'' is being developed to evaluate a number of inverse techniques that may be used for flow calculations in the WIPP performance assessment (PA). The Test Problem is actually a series of test cases, each being developed as a highly complex synthetic data set; the intent is for the ensemble of these data sets to span the range of possible conceptual models of groundwater flow at the WIPP site. The Test Problem analysis approach is to use a comparison of the probabilistic groundwater travel time (GWTT) estimates produced by each technique as the basis for the evaluation. Participants are given observations of head and transmissivity (possibly including measurement error) or other information such as drawdowns from pumping wells, and are asked to develop stochastic models of groundwater flow for the synthetic system. Cumulative distribution functions (CDFs) of groundwater flow (computed via particle tracking) are constructed using the head and transmissivity data generated through the application of each technique; one semi-analytical method generates the CDFs of groundwater flow directly. This paper describes the results from Test Case No. 1

On the use of sensitivity tests in seismic tomography

NARCIS (Netherlands)

Rawlinson, N.; Spakman, W.

2016-01-01

Sensitivity analysis with synthetic models is widely used in seismic tomography as a means for assessing the spatial resolution of solutions produced by, in most cases, linear or iterative nonlinear inversion schemes. The most common type of synthetic reconstruction test is the so-called

Trends of reporTed ouTpaTienT malaria cases To assess The TesT ...

African Journals Online (AJOL)

Background: kenya reports over six million malaria cases annually. in 2012 the country adopted the Test, Treat and Track (T3) policy to ensure that all suspected .... cases increased by about half in all ages (50% in + 5 ...

Faecal carriage of extended-spectrum b-lactamase-producing and AMpC b-lactamase-producing bacteria among Danish army recruits

DEFF Research Database (Denmark)

Hammerum, A.M; Lester, C.H; Jakobsen, L

2011-01-01

During May and June 2008, 84 Danish army recruits were tested for faecal carriage of extended-spectrum b-lactamase (ESBL)- producing and AmpC b-lactamase-producing bacteria. Three ESBL-producing (CTX-M-14a) Escherichia coli isolates, two AmpC-producing (CMY-2) E. coli isolates and one Amp...

Mothers Who Kill Their Offspring: Testing Evolutionary Hypothesis in a 110-Case Italian Sample

Science.gov (United States)

Camperio Ciani, Andrea S.; Fontanesi, Lilybeth

2012-01-01

Objectives: This research aimed to identify incidents of mothers in Italy killing their own children and to test an adaptive evolutionary hypothesis to explain their occurrence. Methods: 110 cases of mothers killing 123 of their own offspring from 1976 to 2010 were analyzed. Each case was classified using 13 dichotomic variables. Descriptive…

Systemic reaction after performing a food prick-to-prick test. A case report

Directory of Open Access Journals (Sweden)

Karen Estefanía Hernández-Moreno

2017-02-01

Full Text Available Background: Skin prick test is the most widely used test for the diagnosis of IgE-mediated conditions. Commercial extracts are used for its performance, but in the case of fruits and vegetables it is preferable using fresh food. Although both tests possess a good safety profile, hypersensitivity reactions have been recorded. Clinical case: Forty-seven-year old woman with a history of persistent allergic rhinitis, sensitized to the pollen of grasses, olive and salsola; she was referred to an allergology department due to anaphylaxis triggered by the consumption of avocado, cantaloupe, carrots and watermelon. Minutes after skin prick test with standardized extract and skin prick with fresh foods, she developed dyspnea, pruritus, erythema, dizziness and sibilance; she was administered 0.5 mg of intramuscular adrenalin and 4 salbutamol inhalations and placed in the Trendelemburg position. Dyspnea persisted, and vital signs monitoring showed heart and respiratory rates increase and, hence, salbutamol was applied again, together with 2 L/min of oxygen delivered by nasal cannula, intravenous fluids and 100 mg intravenous hydrocortisone; improvement was observed at 40 minutes. The patient was hospitalized for 48 hours. Conclusions: Although skin tests are safe, the risk of hypersensitivity and anaphylactic reactions should not be ruled out, especially in susceptible patients.

Tekna's produced water conference 2005

International Nuclear Information System (INIS)

2005-01-01

The conference has 22 presentations discussing topics on discharge reduction, produced water quality, produced water re-injection, chemicals particularly environmentally friendly ones, separation technology, reservoir souring, total water management systems, pollution, oil in water problems and platform operation. Various field tests and experiences particularly from the offshore petroleum sector are presented (tk)

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

DEFF Research Database (Denmark)

Davoudinejad, A.; Charalambis, A.; Zhang, Y.

This research investigates the effect of injection moulding process parameters on photopolymer mould inserts produced with the Digital Light Processing (DLP) additive manufacturing (AM) method. The main motivation of applying AM to produce mould inserts, is the potential of reducing lead time...... and manufacturing cost, as well as achieving a more flexible manufacturing method in case of non-mass produced products such as prototypes. In this research moulds inserts of 20 x 20 x 2.7 mm with mould cavities as small as 5 x 4 mm in dimensions are tested. The parts are analyzed and evaluated by the measurements...

Effect of Caffeine Contained in Sports Drink on Hormones Producing Energy Following Sprint Test Performance in Male Soccer Players

Directory of Open Access Journals (Sweden)

Mohammad Fayiz Abumoh'd

2016-05-01

Full Text Available This study investigated the effect of caffeine contained in sports drink on hormones producing energy and sprint test performance in male soccer players. Twelve participants (25.97 ± 2.70 y performed the test under thre e conditions (one week apart: caffeine with sports drink (SD-CAF, sports drink (SD, and placebo (PLA. Using a double-blind, placebo-controlled, randomized, crossover protocol, participants performed SD-CAF trial (5 mg/kg of caffeine contained in 300 ml of sports drink 30 minutes prior to sprinting test (7 × 30 m, SD trial (solely 300 ml of sports drink 30 minutes prior to sprinting test, or placebo. Blood analysis indicated significantly higher level of free thyroxine in SD-CAF (21.450 ± 3.048 compared to SD (18.742 ± 1.151 and PLA (16.983 ± 1.783. Similar findings existed regarding insulin (P 0.05. No significant differences were observed between trials in first–fourth repetitions (P > 0.05. Time of fifth-seventh repetitions were significantly lower in SD-CAF compared to SD and PLA (P < 0.05, and were significantly lower in SD than that in PLA (P < 0.05. The time of 7th repetition was (4.331 ± 0.210, 4.610 ± 0.197, 4.81 6 ± 0.171 s for SD-CAF, SD, and PLA, respectively; P < 0.05. In conclusion, caffeine interferes hormones that are responsible for producing energy which in turn have a positive effect on repeated sprint bouts.

Casing drilling

Energy Technology Data Exchange (ETDEWEB)

Heenan, D. [Tesco Corp., Calgary, AB (Canada)

2003-07-01

This paper reviewed the experience that Tesco has gained by drilling several wells using only casings as the drill stem. Tesco has manufactured a mobile and compact hydraulic drilling rig called the Casing Drilling {sup TM} system. The system could be very effective and efficient for exploration and development of coalbed methane (CBM) reserves which typically require extensive coring. Continuous coring while drilling ahead, along wire line retrieval, can offer time savings and quick core recovery of large diameter core which is typically required for exploration core desorption tests. The proposed system may also have the potential to core or drill typically tight gas sands or underbalanced wells with air or foam. This would reduce drilling fluid damage while simultaneously finding gas. Compared to conventional drill pipes, Casing Drilling {sup TM} could also be effective with water production from shallow sands because of the smaller annual clearance which requires less air volumes to lift any produced water. 9 figs.

Mass Producing Innovation: A Case Investigation on Why Accelerators Might Not Be a Paradox

Directory of Open Access Journals (Sweden)

Andrew Barnes

2016-12-01

Full Text Available There are a growing number of accelerator programmes designed to start and support innovative startup businesses. Many accelerators are increasing the size of their intakes, with some programmes now launching over 200 new companies per year. On first inspection the large numbers and consistent approach taken to accelerating the participating companies appears to be in conflict with producing innovative and disruptive companies. This paper uses Y Combinator as a single case study to investigate whether increasing the number of companies within a batch has resulted in longer or shorter timeframes for companies to achieve an exit (through acquisition or initial public offering. The paper finds that the timeframe for achieving an exit for Y Combinator companies is reducing, even while batch size has sharply increased. There is no statistically significant correlation between the cohort size and the initial money raised during the programme.    Keyword : Accelerators, Startups, Innovation

Validation of new CFD release by Ground-Coupled Heat Transfer Test Cases

Directory of Open Access Journals (Sweden)

Sehnalek Stanislav

2017-01-01

Full Text Available In this article is presented validation of ANSYS Fluent with IEA BESTEST Task 34. Article stars with outlook to the topic, afterward are described steady-state cases used for validation. Thereafter is mentioned implementation of these cases on CFD. Article is concluded with presentation of the simulated results with a comparison of those from already validated simulation software by IEA. These validation shows high correlation with an older version of tested ANSYS as well as with other main software. The paper ends by discussion with an outline of future research.

Contract for service to produce 50 tonnes sterifeed - lesson learned from semi-commercial scale test production

International Nuclear Information System (INIS)

Hassan Hamdani Mutaat; Mat Rasol Awang; Zainon Said; Irwan Md Arif; Alias K Sadeli

2005-01-01

A contract for service has been awarded to a local company to produce 50 tonnes Sterifeed in a period of 4 months commencing 3 September 2001. The production was for supplying enough feed for the testing of Sterifeed on cattle. Appointed contractor was required to manage the production, supply labours and provide transport for the full production operation of the plant. The production performance is discussed based on: the labour cost; supervision and control; and skill and training. This report discusses and evaluate the suitability of service for contract for the future commercial scale production. (Author)

Preclinical test: bacterial reverse mutation test for {sup 18}F-fluorocholine produced in CDTN

Energy Technology Data Exchange (ETDEWEB)

Mendes, Bruno M.; Bispo, Ana Carolina A.; Campos, Danielle C.; Silva, Juliana B., E-mail: bmm@cdtn.br, E-mail: acab@cdtn.br, E-mail: dcc@cdtn.br, E-mail: silvajb@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2013-07-01

The choline labeled with fluorine-18 (18FCH) is being considered as a great importance radiopharmaceutical due to its effective detection of many type of malignant neoplasm. The research related to {sup 18}F-fluorocholine synthesis in CDTN was initiated in 2010. In order to obtain clinical research approval, as well as to register {sup 18}FCH for marketing, safety and efficacy preclinical testing are required. The present work evaluated the {sup 18}FCH genotoxic potential through the bacterial reverse mutation test (Ames test) using Salmonella typhimurium TA-98, TA-100, TA-1535 and TA-1537 strains and Escherichia coli WP2 uvrA strain. The reverse mutation test in bacteria for fluorcolina was conducted in two stages. Initially the method was applied to 'cold' fluorocholine molecule (19FCH). Subsequently, the decayed product of {sup 18}FCH synthesis was evaluated. The first step was performed in order to examine the FCH molecule mutagenicity. The second was carried out to determine the mutagenic potential of final product. All strains were tested in triplicate for each exposure concentration, in the presence and absence of metabolic activation (S-9 mix - 10%). There were no statistically significant increases in revertant colonies rate for any strains tested after their exposure to decayed {sup 18}FCH or {sup 19}FCH. The number of revertant colonies in positive controls was significantly higher than that observed in significant increases in revertant colonies rate for any strains tested after their exposure to decayed {sup 18}FCH or {sup 19}FCH. The number of revertant colonies in positive controls was significantly higher than that observed in negative controls. Based on results of this assay, {sup 18}FCH and {sup 19}FCH, at tested doses, were found to be non-mutagenic in bacterial reverse mutation test. (author)

Methicillin sensitive Staphylococcus aureus producing Panton-Valentine leukocidin toxin in Trinidad & Tobago: a case report

Directory of Open Access Journals (Sweden)

Rao AV

2011-04-01

Full Text Available Abstract Introduction Certain Staphylococcus aureus strains produce Panton-Valentine leukocidin, a toxin that lyses white blood cells causing extensive tissue necrosis and chronic, recurrent or severe infection. This report documents a confirmed case of methicillin-sensitive Staphylococcus aureus strain harboring Panton-Valentine leukocidin genes from Trinidad and Tobago. To the best of our knowledge, this is the first time that such a case has been identified and reported from this country. Case presentation A 13-year-old Trinidadian boy of African descent presented with upper respiratory symptoms and gastroenteritis-like syptoms. About two weeks later he was re-admitted to our hospital complaining of pain and weakness affecting his left leg, where he had received an intramuscular injection of an anti-emetic drug. He deteriorated and developed septic arthritis, necrotizing fasciitis and septic shock with acute respiratory distress syndrome, leading to death within 48 hours of admission despite intensive care treatment. The infection was caused by S. aureus. Bacterial isolates from specimens recovered from our patient before and after his death were analyzed using microarray DNA analysis and spa typing, and the results revealed that the S. aureus isolates belonged to clonal complex 8, were methicillin-susceptible and positive for Panton-Valentine leukocidin. An autopsy revealed multi-organ failure and histological tissue stains of several organs were also performed and showed involvement of his lungs, liver, kidneys and thymus, which showed Hassal's corpuscles. Conclusion Rapid identification of Panton-Valentine leukocidin in methicillin-sensitive S. aureus isolates causing severe infections is necessary so as not to miss their potentially devastating consequences. Early feedback from the clinical laboratories is crucial.

Characterization and Performance Test of Palm Oil Based Bio-Fuel Produced Via Ni/Zeolite-Catalyzed Cracking Process

Directory of Open Access Journals (Sweden)

Sri Kadarwati

2015-02-01

Full Text Available Catalytic cracking process of palm oil into bio-fuel using Ni/zeolite catalysts (2-10% wt. Ni at various reaction temperatures (400-500oC in a flow-fixed bed reactor system has been carried out. Palm oil was pre-treated to produce methyl ester of palm oil as feedstock in the catalytic cracking reactions. The Ni/zeolite catalysts were prepared by wetness impregnation method using Ni(NO32.6H2O as the precursor. The products were collected and analysed using GC, GC-MS, and calorimeter. The effects of process temperatures and Ni content in Ni/zeolite have been studied. The results showed that Ni-2/zeolite could give a yield of 99.0% at 500oC but only produced gasoline fraction of 18.35%. The physical properties of bio-fuel produced in this condition in terms of density, viscosity, flash point, and specific gravity were less than but similar to commercial fuel. The results of performance test in a 4-strike engine showed that the mixture of commercial gasoline (petrol and bio-fuel with a ratio of 9:1 gave similar performance to fossil-based gasoline with much lower CO and O2 emissions and more efficient combustion

Measurement of the volatility and glass transition temperatures of glasses produced during the DWPF startup test program

International Nuclear Information System (INIS)

Marra, J.C.; Harbour, J.R.

1995-01-01

The Defense Waste Processing Facility (DWPF) will immobilize high-level radioactive waste currently stored in underground tanks at the Savannah River Site by incorporating the waste into a glass matrix. The molten waste glass will be poured into stainless steel canisters which will be welded shut to produce the final waste form. One specification requires that any volatiles produced as a result of accidentally heating the waste glass to the glass transition temperature be identified. Glass samples from five melter campaigns, run as part of the DWPF Startup Test Program, were analyzed to determine glass transition temperatures and to examine the volatilization (by weight loss). Glass transition temperatures (T g ) for the glasses, determined by differential scanning calorimetry (DSC), ranged between 445 C and 474 C. Thermogravimetric analysis (TGA) scans showed that no overall weight loss occurred in any of the glass samples when heated to 500 C. Therefore, no volatility will occur in the final glass product when heated up to 500 C

Should all suspected tuberculosis cases in high income countries be tested with GeneXpert?

Science.gov (United States)

Vella, Venanzio; Broda, Agnieszka; Drobniewski, Francis

2018-05-01

In countries with a low incidence of multidrug-resistant tuberculosis (MDR-TB), universal testing with GeneXpert might not be always cost-effective. This study provides hospital managers in low MDR-TB incidence countries with criteria on when decentralised universal GeneXpert testing would make sense. The alternatives taken into consideration include: universal microbiological culture and drug susceptibility testing (DST) only (comparator); as above but with concurrent centralized GeneXpert in a referral laboratory vs a decentralized GeneXpert system in every hospital to test smear-positive cases only; as above but testing all samples with GeneXpert regardless of smear status. The parameters were from the national TB statistics for England and from a systematic review. Decentralised GeneXpert to test any suspected TB case was the most cost-effective option when 6% or more TB patients belonged to the high-risk group, defined as previous TB diagnosis and or being born in countries with a high MDR-TB incidence. Hospital managers in England and other low MDR-TB incidence countries could use these findings to decide when to invest in GeneXpert or other molecular diagnostics with similar performance criteria for TB diagnostics. Copyright © 2017 Elsevier Ltd. All rights reserved.

Use of a forced-choice test of tactile discrimination in the evaluation of functional sensory loss: a report of 3 cases.

Science.gov (United States)

Greve, Kevin W; Bianchini, Kevin J; Ameduri, Clifford J

2003-08-01

The loss of sensation is not an uncommon associated finding after injury to the peripheral nerves and the spinal cord. However, the sensory examination is prone to the influence of nonphysiologic factors, and one cannot use it to determine whether functional sensory loss reflects unconscious or intentional symptom production. This distinction has important implications for differential diagnosis and for decision making in the context of workers' compensation claims and personal injury litigation. We present 3 cases of patients with chronic pain and nondermatomal patterns of loss of fine-touch sensation, whose sensory loss was examined by a sensory forced-choice symptom validity test. Their below-chance scores showed intentionally produced sensory symptoms. The use of this methodology in differential diagnosis is discussed.

Predictive validity of the Biomedical Admissions Test: an evaluation and case study.

Science.gov (United States)

McManus, I C; Ferguson, Eamonn; Wakeford, Richard; Powis, David; James, David

2011-01-01

There has been an increase in the use of pre-admission selection tests for medicine. Such tests need to show good psychometric properties. Here, we use a paper by Emery and Bell [2009. The predictive validity of the Biomedical Admissions Test for pre-clinical examination performance. Med Educ 43:557-564] as a case study to evaluate and comment on the reporting of psychometric data in the field of medical student selection (and the comments apply to many papers in the field). We highlight pitfalls when reliability data are not presented, how simple zero-order associations can lead to inaccurate conclusions about the predictive validity of a test, and how biases need to be explored and reported. We show with BMAT that it is the knowledge part of the test which does all the predictive work. We show that without evidence of incremental validity it is difficult to assess the value of any selection tests for medicine.

Downscale cascades in tracer transport test cases: an intercomparison of the dynamical cores in the Community Atmosphere Model CAM5

Directory of Open Access Journals (Sweden)

J. Kent

2012-12-01

Full Text Available The accurate modeling of cascades to unresolved scales is an important part of the tracer transport component of dynamical cores of weather and climate models. This paper aims to investigate the ability of the advection schemes in the National Center for Atmospheric Research's Community Atmosphere Model version 5 (CAM5 to model this cascade. In order to quantify the effects of the different advection schemes in CAM5, four two-dimensional tracer transport test cases are presented. Three of the tests stretch the tracer below the scale of coarse resolution grids to ensure the downscale cascade of tracer variance. These results are compared with a high resolution reference solution, which is simulated on a resolution fine enough to resolve the tracer during the test. The fourth test has two separate flow cells, and is designed so that any tracer in the western hemisphere should not pass into the eastern hemisphere. This is to test whether the diffusion in transport schemes, often in the form of explicit hyper-diffusion terms or implicit through monotonic limiters, contains unphysical mixing.

An intercomparison of three of the dynamical cores of the National Center for Atmospheric Research's Community Atmosphere Model version 5 is performed. The results show that the finite-volume (CAM-FV and spectral element (CAM-SE dynamical cores model the downscale cascade of tracer variance better than the semi-Lagrangian transport scheme of the Eulerian spectral transform core (CAM-EUL. Each scheme tested produces unphysical mass in the eastern hemisphere of the separate cells test.

Testing the Suitability of Mediation of Child Support Orders in Title IV-D Cases

Science.gov (United States)

Schraufnagel, Scot; Li, Quan

2010-01-01

Objectives: The purpose of this study is to test mediation versus a traditional court process for the establishment or modification of child support orders. The intention is to determine which dispute resolution process is associated with greater client satisfaction and compliance. An auxiliary objective is to test the type of cases which are most…

Retrospective testing and case series study of porcine delta coronavirus in U.S. swine herds.

Science.gov (United States)

McCluskey, Brian J; Haley, Charles; Rovira, Albert; Main, Rodger; Zhang, Yan; Barder, Sunny

2016-01-01

Porcine deltacoronavirus (PDCoV) was first reported in the United States (US) in February 2014. This was the second novel swine enteric coronavirus detected in the US since May 2013. In this study, we conducted retrospective testing of samples submitted to three veterinary diagnostic laboratories where qualifying biological samples were derived from previously submitted diagnostic case submissions from US commercial swine farms with a clinical history of enteric disease or from cases that had been previously tested for transmissible gastroenteritis virus, PEDV, or rotavirus. Overall, 2286 banked samples were tested from 27 States. Samples were collected in 3 separate years and in 17 different months. Test results revealed 4 positive samples, 3 collected in August 2013 and 1 collected in October 2013. In addition, a case series including 42 operations in 10 States was conducted through administration of a survey. Survey data collected included information on characteristics of swine operations that had experienced PDCoV clinical signs. Special emphasis was placed on obtaining descriptive estimates of biosecurity practices and disease status over time of each operation. Clinical signs of PDCoV were reported to be similar to those of PEDV. The average number of animals on each operation exhibiting clinical signs (morbidity) and the average number of case fatalities was greatest for suckling and weaned pigs. Average operation-level weaned pig morbidity was greatest in the first week of the outbreak while average operation-level suckling pig case fatality was greatest in the second week of the outbreak. The survey included questions regarding biosecurity practices for visitors and operation employees; trucks, equipment and drivers; and feed sources. These questions attempted to identify a likely pathway of introduction of PDCoV onto the operations surveyed. Published by Elsevier B.V.

Idealized tropical cyclone simulations of intermediate complexity: A test case for AGCMs

Directory of Open Access Journals (Sweden)

Kevin Reed

2012-04-01

Full Text Available The paper introduces a moist, deterministic test case of intermediate complexity for Atmospheric General Circulation Models (AGCMs. We suggest pairing an AGCM dynamical core with simple physical parameterizations to test the evolution of a single, idealized, initially weak vortex into a tropical cyclone. The initial conditions are based on an initial vortex seed that is in gradient-wind and hydrostatic balance. The suggested ``simple-physics'' package consists of parameterizations of bulk aerodynamic surface fluxes for moisture, sensible heat and momentum, boundary layer diffusion, and large-scale condensation. Such a configuration includes the important driving mechanisms for tropical cyclones, and leads to a rapid intensification of the initial vortex over a forecast period of ten days. The simple-physics test paradigm is not limited to tropical cyclones, and can be universally applied to other flow fields. The physical parameterizations are described in detail to foster model intercomparisons.The characteristics of the intermediate-complexity test case are demonstrated with the help of four hydrostatic dynamical cores that are part of the Community Atmosphere Model version 5 (CAM 5 developed at the National Center for Atmospheric Research (NCAR. In particular, these are the Finite-Volume, Spectral Element, and spectral transform Eulerian and semi-Lagrangian dynamical cores that are coupled to the simple-physics suite. The simulations show that despite the simplicity of the physics forcings the models develop the tropical cyclone at horizontal grid spacings of about 55 km and finer. The simple-physics simulations reveal essential differences in the storm's structure and strength due to the choice of the dynamical core. Similar differences are also seen in complex full-physics aqua-planet experiments with CAM 5 which serve as a motivator for this work. The results suggest that differences in complex full-physics simulations can be, at least

INGESTION OF DESIGNER SUPPLEMENTS PRODUCED POSITIVE DOPING CASES UNEXPECTED BY THE ATHLETES

Directory of Open Access Journals (Sweden)

M.K. Parr

2011-09-01

Full Text Available Since the end of the last century, the sport community has been grappling with contamination and faking of dietary or nutritional supplements. Publication of the results of many studies on this problem has resulted in educational and informative actions on risk connected with consumption of unchecked products. As compared to the past, nowadays athletes have become incomparably more aware of the potential risk of a positive result in anti-doping tests as a consequence of consumption of contaminated dietary supplements. However, this problem is still topical, which is confirmed by regular reports, presented e.g. during the Cologne Workshops on Dope Analysis held annually in Germany. This paper presents a few doping cases caused by the use of supplements with doping substances by athletes, noted by two WADA accredited laboratories (Cologne and Warsaw. Still more education on the health and doping risks of dietary supplement products seems to be necessary for the protection of both athletes and the general public.

Women as food producers and suppliers in the twentieth century. The case of Zambia.

Science.gov (United States)

Muntemba, S

1982-01-01

marketable crop, to the disadvantage of sufficient food supplies for the producers themselves. The case of Zambia is presented, and it is concluded that the situation of women producers and of food production worsened at a pace responding to the nature of capitalist appropriation of land and labor and the intensification of cash crop production. Thus the phenomenon became more marked after 1945 when colonial states intensified cash crop production. The situation persisted after formal independence. Another Development must tackle the problem areas of land, labor, the sexual division of labor, the state, and men.

Non-pathological complete paternal uniparental isodisomy of chromosome 2 revealed in a maternity testing case.

Science.gov (United States)

Chen, Man; Jiang, Jian; Li, Chen; Ren, He; Chen, Wei; Liu, Zhiyong; Cheng, Feng; Zhao, Jing; Chen, Tong; Chen, Chuguang; Yan, Jiangwei

2018-05-25

We present a duo paternity test case to assess the biological relationship between a woman and her female child. After analyzing 57 autosomal and 19 X-chromosomal short tandem repeat loci, mother-daughter exclusions were discovered at four loci, which were all located on chromosome 2. Further testing of whole-genome single nucleotide polymorphisms confirmed that the daughter had complete uniparental disomy (UPD) of chromosome 2. This study presents a cautionary case demonstrating that hasty decisions of parentage exclusion should not be made when genetic markers on the same chromosome do not conform to Mendel's laws due to UPD.

SHEARING STRENGTH TEST OF ORTOPEDIC TITANIUM ALLOY SCREW PRODUCED IN THE PROCESS OF 3D TECHNOLOGY PRINTING

Directory of Open Access Journals (Sweden)

Patrycja Ruszniak

2016-03-01

Full Text Available The aim of the present dissertation is the assessment of technical shear resistance (technological shear of orthopedic screw made of titanium alloy Ti6Al4V, produced using incremental technology in the process of 3D printing process. The first part of the work presents incremental techniques in production engineering. The second part of the present work contains specification of the 3D printing process of samples as well as the description of the used material. The fundamental part of the article is composed out of endurance tests for orthopaedic screws as well as the analysis of the obtained results and conclusions. The method of incremental production SLM using SLM 280HL metal printer was used during the technological process. The resistance tests were performed using ZWICK/ROELL Z150 machines. Identical endurance trials were performed for monolithic bars made of titanium alloys (of bar core size made on a wire electric discharge machine Sodick SL600Q for comparative purposes. The obtained test results enabled comparative assessment of the value of shear resistance Rt in the conditions of technological shear. According to the performed tests, the shear resistance Rt of orthopaedic screws is nearly 33% lower than of monolithic bars of the same core size.

VALGALI: VERIFICATION AND VALIDATION TOOL FOR THE LIBRARIES PRODUCED BY THE GALILEE SYSTEM

International Nuclear Information System (INIS)

Mengelle, S.

2011-01-01

Full text: In this paper we present VALGALI the verification and validation tool for the libraries produced by the nuclear data processing system GALILEE. The aim of this system is to provide libraries with consistent physical data for various application codes (the deterministic transport code APOLLO2, the Monte Carlo transport code TRRIPOLI-4, the depletion code DARWIN, ...). For each library, are the data stored at the good place with the good format and so one. Are the libraries used by the various codes consistent. What is the physical quality of the cross sections and data present in the libraries. These three types of tests correspond to the classic stages of VandV. The great strength of VALGALI is to be generic and not dedicated to one application code Consequently, it is based on a common physical validation database which coverage is regularly increased. For all these test cases, the input data are declined for each relevant application code Moreover it can exist specific test case for each application code: At the present, VALGALI an check and validate the libraries of APOLLO2 and TRIPOLI4, but in the near future VALGALI wil also treat the libraries of DARWIN.

Robust Tests for Additive Gene-Environment Interaction in Case-Control Studies Using Gene-Environment Independence

DEFF Research Database (Denmark)

Liu, Gang; Lee, Seunggeun; Lee, Alice W

2018-01-01

test with case-control data. Our simulation studies suggest that the EB approach uses the gene-environment independence assumption in a data-adaptive way and provides power gain compared to the standard logistic regression analysis and better control of Type I error when compared to the analysis......There have been recent proposals advocating the use of additive gene-environment interaction instead of the widely used multiplicative scale, as a more relevant public health measure. Using gene-environment independence enhances the power for testing multiplicative interaction in case......-control studies. However, under departure from this assumption, substantial bias in the estimates and inflated Type I error in the corresponding tests can occur. This paper extends the empirical Bayes (EB) approach previously developed for multiplicative interaction that trades off between bias and efficiency...

Differentiating Botulinum Neurotoxin-Producing Clostridia with a Simple, Multiplex PCR Assay.

Science.gov (United States)

Williamson, Charles H D; Vazquez, Adam J; Hill, Karen; Smith, Theresa J; Nottingham, Roxanne; Stone, Nathan E; Sobek, Colin J; Cocking, Jill H; Fernández, Rafael A; Caballero, Patricia A; Leiser, Owen P; Keim, Paul; Sahl, Jason W

2017-09-15

Diverse members of the genus Clostridium produce botulinum neurotoxins (BoNTs), which cause a flaccid paralysis known as botulism. While multiple species of clostridia produce BoNTs, the majority of human botulism cases have been attributed to Clostridium botulinum groups I and II. Recent comparative genomic studies have demonstrated the genomic diversity within these BoNT-producing species. This report introduces a multiplex PCR assay for differentiating members of C. botulinum group I, C. sporogenes , and two major subgroups within C. botulinum group II. Coding region sequences unique to each of the four species/subgroups were identified by in silico analyses of thousands of genome assemblies, and PCR primers were designed to amplify each marker. The resulting multiplex PCR assay correctly assigned 41 tested isolates to the appropriate species or subgroup. A separate PCR assay to determine the presence of the ntnh gene (a gene associated with the botulinum neurotoxin gene cluster) was developed and validated. The ntnh gene PCR assay provides information about the presence or absence of the botulinum neurotoxin gene cluster and the type of gene cluster present ( ha positive [ ha + ] or orfX + ). The increased availability of whole-genome sequence data and comparative genomic tools enabled the design of these assays, which provide valuable information for characterizing BoNT-producing clostridia. The PCR assays are rapid, inexpensive tests that can be applied to a variety of sample types to assign isolates to species/subgroups and to detect clostridia with botulinum neurotoxin gene ( bont ) clusters. IMPORTANCE Diverse clostridia produce the botulinum neurotoxin, one of the most potent known neurotoxins. In this study, a multiplex PCR assay was developed to differentiate clostridia that are most commonly isolated in connection with human botulism cases: C. botulinum group I, C. sporogenes , and two major subgroups within C. botulinum group II. Since BoNT-producing

Sensitivity analysis methods and a biosphere test case implemented in EIKOS

Energy Technology Data Exchange (ETDEWEB)

Ekstroem, P.A.; Broed, R. [Facilia AB, Stockholm, (Sweden)

2006-05-15

Computer-based models can be used to approximate real life processes. These models are usually based on mathematical equations, which are dependent on several variables. The predictive capability of models is therefore limited by the uncertainty in the value of these. Sensitivity analysis is used to apportion the relative importance each uncertain input parameter has on the output variation. Sensitivity analysis is therefore an essential tool in simulation modelling and for performing risk assessments. Simple sensitivity analysis techniques based on fitting the output to a linear equation are often used, for example correlation or linear regression coefficients. These methods work well for linear models, but for non-linear models their sensitivity estimations are not accurate. Usually models of complex natural systems are non-linear. Within the scope of this work, various sensitivity analysis methods, which can cope with linear, non-linear, as well as non-monotone problems, have been implemented, in a software package, EIKOS, written in Matlab language. The following sensitivity analysis methods are supported by EIKOS: Pearson product moment correlation coefficient (CC), Spearman Rank Correlation Coefficient (RCC), Partial (Rank) Correlation Coefficients (PCC), Standardized (Rank) Regression Coefficients (SRC), Sobol' method, Jansen's alternative, Extended Fourier Amplitude Sensitivity Test (EFAST) as well as the classical FAST method and the Smirnov and the Cramer-von Mises tests. A graphical user interface has also been developed, from which the user easily can load or call the model and perform a sensitivity analysis as well as uncertainty analysis. The implemented sensitivity analysis methods has been benchmarked with well-known test functions and compared with other sensitivity analysis software, with successful results. An illustration of the applicability of EIKOS is added to the report. The test case used is a landscape model consisting of several

Sensitivity analysis methods and a biosphere test case implemented in EIKOS

International Nuclear Information System (INIS)

Ekstroem, P.A.; Broed, R.

2006-05-01

Computer-based models can be used to approximate real life processes. These models are usually based on mathematical equations, which are dependent on several variables. The predictive capability of models is therefore limited by the uncertainty in the value of these. Sensitivity analysis is used to apportion the relative importance each uncertain input parameter has on the output variation. Sensitivity analysis is therefore an essential tool in simulation modelling and for performing risk assessments. Simple sensitivity analysis techniques based on fitting the output to a linear equation are often used, for example correlation or linear regression coefficients. These methods work well for linear models, but for non-linear models their sensitivity estimations are not accurate. Usually models of complex natural systems are non-linear. Within the scope of this work, various sensitivity analysis methods, which can cope with linear, non-linear, as well as non-monotone problems, have been implemented, in a software package, EIKOS, written in Matlab language. The following sensitivity analysis methods are supported by EIKOS: Pearson product moment correlation coefficient (CC), Spearman Rank Correlation Coefficient (RCC), Partial (Rank) Correlation Coefficients (PCC), Standardized (Rank) Regression Coefficients (SRC), Sobol' method, Jansen's alternative, Extended Fourier Amplitude Sensitivity Test (EFAST) as well as the classical FAST method and the Smirnov and the Cramer-von Mises tests. A graphical user interface has also been developed, from which the user easily can load or call the model and perform a sensitivity analysis as well as uncertainty analysis. The implemented sensitivity analysis methods has been benchmarked with well-known test functions and compared with other sensitivity analysis software, with successful results. An illustration of the applicability of EIKOS is added to the report. The test case used is a landscape model consisting of several linked

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

Science.gov (United States)

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

In-home versus laboratory sensory testing using non-expert consumers: A comparable study using testing of varieties of Danish strawberries as cases

DEFF Research Database (Denmark)

Østergaard, Peder

varieties of strawberries, which are able to satisfy both consumer and producer demands, in which both testing approaches have been used. As part of the project the following methodological steps were taken in order to identify consumer preferences for strawberries: focus group interviews aiming at finding...... the relevant question for a large scale survey among Danish households (n=1162), showing the households general knowledge, attitudes and behaviour when buying and consuming strawberries. From this large scale survey n=120 persons were randomly selected for participation in experiments, where 9 new varieties...... and 2 well-known varieties of strawberries were tested. The testing used a split-over design where each person participated in sensory testing of 5 different varieties of strawberries. Besides all the participant in the experiment were asked to do an in-home test of 2 of the 5 varieties of strawberries...

A new fit-for-purpose model testing framework: Decision Crash Tests

Science.gov (United States)

Tolson, Bryan; Craig, James

2016-04-01

decisions. In one case, we show the set of model building decisions has a low probability to correctly support the upgrade decision. In the other case, we show evidence suggesting another set of model building decisions has a high probability to correctly support the decision. The proposed DCT framework focuses on what model users typically care about: the management decision in question. The DCT framework will often be very strict and will produce easy to interpret results enabling clear unsuitability determinations. In the past, hydrologic modelling progress has necessarily meant new models and model building methods. Continued progress in hydrologic modelling requires finding clear evidence to motivate researchers to disregard unproductive models and methods and the DCT framework is built to produce this kind of evidence. References: Andréassian, V., C. Perrin, L. Berthet, N. Le Moine, J. Lerat, C. Loumagne, L. Oudin, T. Mathevet, M.-H. Ramos, and A. Valéry (2009), Crash tests for a standardized evaluation of hydrological models. Hydrology and Earth System Sciences, 13, 1757-1764. Klemeš, V. (1986), Operational testing of hydrological simulation models. Hydrological Sciences Journal, 31 (1), 13-24.

Post-mortem diagnostics in cases of sepsis. Part 1. Aetiology, epidemiology and microbiological tests

Directory of Open Access Journals (Sweden)

Marta Rorat

2015-03-01

Full Text Available Clinical practice has an effective methodology of diagnostic procedures to be followed in cases of sepsis. However, there are as yet no corresponding standards of action in post-mortem diagnostics. The scope of examinations is limited to an autopsy and histopathological tests. This situation may lead to errors in medico-legal opinions on the cause of death and in the assessment of appropriateness of medical procedures. In cases of suspected sepsis, medico-legal investigations require obtaining detailed information about the circumstances of death (including symptoms and results of intravital examinations before autopsy is performed, as well as sterile collection of specimens for microbiological tests and interpretation of their results on the basis of knowledge of epidemiology, pathophysiology and clinical progression of sepsis.

Can student-produced video transform university teaching?

DEFF Research Database (Denmark)

2011-01-01

as preparation for the two week intensive field course. The overall objective of the redesign was to modernize and improve the quality of the students learning experience, by exploring the potentials of video and online tools to create flexible, student-centered and student-activating education. The student...... produced three types of videos during the course: Video 1 was independently produced by the students, guided by online tasks and instructions. These videos were student produced learning material, showing cases from all over Europe. The videos was collected and presented in a "visual database" in Google...

Utility of Post-Mortem Genetic Testing in Cases of Sudden Arrhythmic Death Syndrome

NARCIS (Netherlands)

Lahrouchi, Najim; Raju, Hariharan; Lodder, Elisabeth M.; Papatheodorou, Efstathios; Ware, James S.; Papadakis, Michael; Tadros, Rafik; Cole, Della; Skinner, Jonathan R.; Crawford, Jackie; Love, Donald R.; Pua, Chee J.; Soh, Bee Y.; Bhalshankar, Jaydutt D.; Govind, Risha; Tfelt-Hansen, Jacob; Winkel, Bo G.; van der Werf, Christian; Wijeyeratne, Yanushi D.; Mellor, Greg; Till, Jan; Cohen, Marta C.; Tome-Esteban, Maria; Sharma, Sanjay; Wilde, Arthur A. M.; Cook, Stuart A.; Bezzina, Connie R.; Sheppard, Mary N.; Behr, Elijah R.

2017-01-01

Sudden arrhythmic death syndrome (SADS) describes a sudden death with negative autopsy and toxicological analysis. Cardiac genetic disease is a likely etiology. This study investigated the clinical utility and combined yield of post-mortem genetic testing (molecular autopsy) in cases of SADS and

Influenza outbreak during Sydney World Youth Day 2008: the utility of laboratory testing and case definitions on mass gathering outbreak containment.

Directory of Open Access Journals (Sweden)

Sebastiaan J van Hal

Full Text Available BACKGROUND: Influenza causes annual epidemics and often results in extensive outbreaks in closed communities. To minimize transmission, a range of interventions have been suggested. For these to be effective, an accurate and timely diagnosis of influenza is required. This is confirmed by a positive laboratory test result in an individual whose symptoms are consistent with a predefined clinical case definition. However, the utility of these clinical case definitions and laboratory testing in mass gathering outbreaks remains unknown. METHODS AND RESULTS: An influenza outbreak was identified during World Youth Day 2008 in Sydney. From the data collected on pilgrims presenting to a single clinic, a Markov model was developed and validated against the actual epidemic curve. Simulations were performed to examine the utility of different clinical case definitions and laboratory testing strategies for containment of influenza outbreaks. Clinical case definitions were found to have the greatest impact on averting further cases with no added benefit when combined with any laboratory test. Although nucleic acid testing (NAT demonstrated higher utility than indirect immunofluorescence antigen or on-site point-of-care testing, this effect was lost when laboratory NAT turnaround times was included. The main benefit of laboratory confirmation was limited to identification of true influenza cases amenable to interventions such as antiviral therapy. CONCLUSIONS: Continuous re-evaluation of case definitions and laboratory testing strategies are essential for effective management of influenza outbreaks during mass gatherings.

Aromatic hydrocarbons in produced water from offshore oil and gas production. Test of sample strategy; Aromatiske kulbrinter i produceret vand fra offshore olie- og gas industrien. Test af proevetagningsstrategi

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.

2005-07-01

In co-operation with the Danish EPA, the National Environmental Research Institute (NERI) has carried out a series of measurements of aromatic hydrocarbons in produced water from an offshore oil and gas production platform in the Danish sector of the North Sea as part of the project 'Testing of sampling strategy for aromatic hydrocarbons in produced water from the offshore oil and gas industry'. The measurements included both volatile (BTEX: benzene, toluene, ethylbenzene and xylenes) and semi-volatile aromatic hydrocarbons: NPD (naphthalenes, phenanthrenes and dibenzothiophenes) and selected PAHs (polycyclic aromatic hydrocarbons). In total, 12 samples of produced water were sampled at the Dan FF production platform located in the North Sea by the operator, Maersk Oil and Gas, as four sets of three parallel samples from November 24 - December 02, 2004. After collection of the last set, the samples were shipped to NERI for analysis. The water samples were collected in 1 L glass bottles that were filled completely (without overfilling) and tightly closed. After sampling, the samples were preserved with hydrochloric acid and cooled below ambient until being shipped off to NERI. Here all samples were analysed in dublicates, and the results show that for BTEX, levels were reduced compared to similar measurements carried out by NERI in 2002 and others. In this work, BTEX levels were approximately 5 mg/L, while similar studies showed levels in the range 0,5 - 35 mg/L. For NPD levels were similar, 0,5 - 1,4 mg/L, while for PAH they seerred elevated; 0,1 - 0,4 mg/L in this work compared to 0,001 - 0,3 mg/L in similar studies. The applied sampling strategy has been tested by performing analysis of variance on the analytical data. The test of the analytical data has shown that the mean values of the three parallel samples collected in series constituted a good estimate of the levels at the time of sampling; thus, the variance between the parallel samples was not

Strategy for a Rock Mechanics Site Descriptive Model. A test case based on data from the Aespoe HRL

International Nuclear Information System (INIS)

Hudson, John A

2002-06-01

In anticipation of the SKB Site Investigations for radioactive waste disposal, an approach has been developed for the Rock Mechanics Site Descriptive Model. This approach was tested by predicting the rock mechanics properties of a 600 m x 180 m x 120 m rock volume at the Aespoe Hard Rock Laboratory (HRL) using limited borehole data of the type typically obtained during a site investigation. These predicted properties were then compared with 'best estimate' properties obtained from a study of the test rock volume using additional information, mainly tunnel data. The exercise was known as the Test Case, and is the subject of this Report. Three modelling techniques were used to predict the rock properties: the 'empirical approach' - the rock properties were estimated using rock mass classification schemes and empirical correlation formulae; the 'theoretical approach' - the rock properties were estimated using numerical modelling techniques; and the 'stress approach' - the rock stress state was estimated using primary data and numerical modelling. These approaches are described separately and respectively. Following an explanation of the context for the Test Case within the strategy for developing the Rock Mechanics Site Descriptive Model, conditions at the Aespoe HRL are described in Chapter 2. The Test Case organization and the suite of nine Protocols used to ensure that the work was appropriately guided and co-ordinated are described in Chapter 3. The methods for predicting the rock properties and the rock stress, and comparisons with the 'best estimate' properties of the actual conditions, are presented in Chapters 4 and 5. Finally, the conclusions from this Test Case exercise are given in Chapter 6. General recommendations for the management of this type of Test Case are also included

Strategy for a Rock Mechanics Site Descriptive Model. A test case based on data from the Aespoe HRL

Energy Technology Data Exchange (ETDEWEB)

Hudson, John A (ed.) [Rock Engineering Consultants, Welwyn Garden City (United Kingdom)

2002-06-01

In anticipation of the SKB Site Investigations for radioactive waste disposal, an approach has been developed for the Rock Mechanics Site Descriptive Model. This approach was tested by predicting the rock mechanics properties of a 600 m x 180 m x 120 m rock volume at the Aespoe Hard Rock Laboratory (HRL) using limited borehole data of the type typically obtained during a site investigation. These predicted properties were then compared with 'best estimate' properties obtained from a study of the test rock volume using additional information, mainly tunnel data. The exercise was known as the Test Case, and is the subject of this Report. Three modelling techniques were used to predict the rock properties: the 'empirical approach' - the rock properties were estimated using rock mass classification schemes and empirical correlation formulae; the 'theoretical approach' - the rock properties were estimated using numerical modelling techniques; and the 'stress approach' - the rock stress state was estimated using primary data and numerical modelling. These approaches are described separately and respectively. Following an explanation of the context for the Test Case within the strategy for developing the Rock Mechanics Site Descriptive Model, conditions at the Aespoe HRL are described in Chapter 2. The Test Case organization and the suite of nine Protocols used to ensure that the work was appropriately guided and co-ordinated are described in Chapter 3. The methods for predicting the rock properties and the rock stress, and comparisons with the 'best estimate' properties of the actual conditions, are presented in Chapters 4 and 5. Finally, the conclusions from this Test Case exercise are given in Chapter 6. General recommendations for the management of this type of Test Case are also included.

Origin of honeycombs: Testing the hydraulic and case hardening hypotheses

Science.gov (United States)

Bruthans, Jiří; Filippi, Michal; Slavík, Martin; Svobodová, Eliška

2018-02-01

Cavernous weathering (cavernous rock decay) is a global phenomenon, which occurs in porous rocks around the world. Although honeycombs and tafoni are considered to be the most common products of this complex process, their origin and evolution are as yet not fully understood. The two commonly assumed formation hypotheses - hydraulic and case hardening - were tested to elucidate the origin of honeycombs on sandstone outcrops in a humid climate. Mechanical and hydraulic properties of the lips (walls between adjacent pits) and backwalls (bottoms of pits) of the honeycombs were determined via a set of established and novel approaches. While the case hardening hypothesis was not supported by the determinations of either tensile strength, drilling resistance or porosity, the hydraulic hypothesis was clearly supported by field measurements and laboratory tests. Fluorescein dye visualization of capillary zone, vapor zone, and evaporation front upon their contact, demonstrated that the evaporation front reaches the honeycomb backwalls under low water flow rate, while the honeycomb lips remain dry. During occasional excessive water flow events, however, the evaporation front may shift to the lips, while the backwalls become moist as a part of the capillary zone. As the zone of evaporation corresponds to the zone of potential salt weathering, it is the spatial distribution of the capillary and vapor zones which dictates whether honeycombs are created or the rock surface is smoothed. A hierarchical model of factors related to the hydraulic field was introduced to obtain better insights into the process of cavernous weathering.

Underground radionuclide migration at the Nevada Test Site

International Nuclear Information System (INIS)

Nimz, G.J.; Thompson, J.L.

1992-01-01

This document reviews results from a number of studies concerning underground migration of radionuclides from nuclear test cavities at the Nevada Test Site (NTS). Discussed are all cases known to the Department of Energy's Hydrology and Radionuclide Migration Program where radionuclides have been detected outside of the immediate vicinity of nuclear test cavities that are identifiable as the-source of the nuclides, as well as cases where radionuclides might have been expected and were intentionally sought but not fixed. There are nine locations where source-identifiable radionuclide migration has been detected, one where migration was purposely induced by pumping, and three where migration might be expected but was not found. In five of the nine cases of non-induced migration, the inferred migration mechanism is prompt fracture injection during detonation. In the other four cases, the inferred migration mechanism is water movement. In only a few of the reviewed cases can the actual migration mechanism be stated with confidence, and the attempt has been made to indicate the level of confidence for each case. References are cited where more information may be obtained. As an aid to future study, this document concludes with a brief discussion of the aspects of radionuclide migration that, as the present review indicates, are not yet understood. A course of action is suggested that would produce a better understanding of the phenomenon of radionuclide migration

Informed Choice in Direct-to-Consumer Genetic Testing for Alzheimer and Other Diseases: Lessons from Two Cases.

Science.gov (United States)

Messner, Donna A

2011-01-01

Health-related direct-to-consumer (DTC) genetic testing has been a controversial practice. Especially problematic is predictive testing for Alzheimer disease (AD), since the disease is incurable, prevention is inconclusive, and testing does not definitively predict an individual's future disease status. In this paper, I examine two contrasting cases of subjects who learn through genetic testing that they have an elevated risk of developing AD later in life. In these cases, the subject's emotional response to the result is related to how well prepared she was for the real-life personal implications of possible test results. Analysis leads to the conclusion that when groups of health-related genetic tests are offered as packages by DTC companies, informed consumer choice is rendered impossible. Moreover, I argue, this marketing approach contravenes U.S. Federal Trade Commission policies for non-deceptive commercial communications. I conclude by suggesting ways to improve the prospects for informed consumer choice in DTC testing.

Seismic waveform inversion best practices: regional, global and exploration test cases

Science.gov (United States)

Modrak, Ryan; Tromp, Jeroen

2016-09-01

Reaching the global minimum of a waveform misfit function requires careful choices about the nonlinear optimization, preconditioning and regularization methods underlying an inversion. Because waveform inversion problems are susceptible to erratic convergence associated with strong nonlinearity, one or two test cases are not enough to reliably inform such decisions. We identify best practices, instead, using four seismic near-surface problems, one regional problem and two global problems. To make meaningful quantitative comparisons between methods, we carry out hundreds of inversions, varying one aspect of the implementation at a time. Comparing nonlinear optimization algorithms, we find that limited-memory BFGS provides computational savings over nonlinear conjugate gradient methods in a wide range of test cases. Comparing preconditioners, we show that a new diagonal scaling derived from the adjoint of the forward operator provides better performance than two conventional preconditioning schemes. Comparing regularization strategies, we find that projection, convolution, Tikhonov regularization and total variation regularization are effective in different contexts. Besides questions of one strategy or another, reliability and efficiency in waveform inversion depend on close numerical attention and care. Implementation details involving the line search and restart conditions have a strong effect on computational cost, regardless of the chosen nonlinear optimization algorithm.

Preliminary Field Tests and Long-Term Monitoring as a Method of Design Risk Mitigation: A Case Study of Gdańsk Deepwater Container Terminal

Directory of Open Access Journals (Sweden)

Miśkiewicz Mikołaj

2017-09-01

Full Text Available Appropriate risk assessment plays a fundamental role in the design. . The authors propose a possible method of design risk mitigation, which follows recommendations included in Eurocode 7. The so-called “Observational Method” (OM can produce savings in costs and programmes on engineering projects without compromising safety. The case study presented is a complex design solution that deals with the heavy foundations of a gantry crane beam as one of the elements of a Deepwater Container Terminal extension. The paper presents a detailed process of the design of the rear crane beam being a part of the brand new berth, together with its static analysis, as well as the long-term results of observations, which have revealed the real performance of the marine structure. The case presented is based on excessive preliminary field tests and technical monitoring of the structure, and is an example of a successful OM implementation and design risk mitigation.

Tractor accelerated test on test rig

Directory of Open Access Journals (Sweden)

M. Mattetti

2013-09-01

Full Text Available The experimental tests performed to validate a tractor prototype before its production, need a substantial financial and time commitment. The tests could be reduced using accelerated tests able to reproduce on the structural part of the tractor, the same damage produced on the tractor during real life in a reduced time. These tests were usually performed reproducing a particular harsh condition a defined number of times, as for example using a bumpy road on track to carry out the test in any weather condition. Using these procedures the loads applied on the tractor structure are different with respect to those obtained during the real use, with the risk to apply loads hard to find in reality. Recently it has been demonstrated how, using the methodologies designed for cars, it is possible to also expedite the structural tests for tractors. In particular, automotive proving grounds were recently successfully used with tractors to perform accelerated structural tests able to reproduce the real use of the machine with an acceleration factor higher than that obtained with the traditional methods. However, the acceleration factor obtained with a tractor on proving grounds is in any case reduced due to the reduced speed of the tractors with respect to cars. In this context, the goal of the paper is to show the development of a methodology to perform an accelerated structural test on a medium power tractor using a 4 post test rig. In particular, several proving ground testing conditions have been performed to measure the loads on the tractor. The loads obtained were then edited to remove the not damaging portion of signals, and finally the loads obtained were reproduced in a 4 post test rig. The methodology proposed could be a valid alternative to the use of a proving ground to reproduce accelerated structural tests on tractors.

Research and field tests of staged fracturing technology for casing deformation sections in horizontal shale gas wells

Directory of Open Access Journals (Sweden)

Shimeng Liao

2018-02-01

Full Text Available Horizontal shale gas well fracturing is mostly carried out by pumping bridge plugs. In the case of casing deformation, the bridge plug can not be pumped down to the designated position, so the hole sections below the deformation could not be stimulated according to the design program. About 30% of horizontal shale gas wells in the Changning and Weiyuan Blocks, Sichuan Basin, suffer various casing deformation after fracturing. Previously, the hole sections which could not be stimulated due to casing deformation were generally abandoned. As a result, the resources controlled by shale gas wells weren't exploited effectively and the fracturing effect was impacted greatly. There are a lot of difficulties in investigating casing deformation, such as complex mechanisms, various influencing factors and unpredictable deformation time. Therefore, it is especially important to seek a staged fracturing technology suitable for the casing deformation sections. In this paper, the staged fracturing technology with sand plugs inside fractures and the staged fracturing technology with temporary plugging balls were tested in casing deformation wells. The staged fracturing technology with sand plugs inside fractures was carried out in the mode of single-stage perforation and single-stage fracturing. The staged fracturing technology with temporary plugging balls was conducted in the mode of single perforation, continuous fracturing and staged ball dropping. Then, two kinds of technologies were compared in terms of their advantages and disadvantages. Finally, they were tested on site. According to the pressure response, the pressure monitoring of the adjacent wells and the microseismic monitoring in the process of actual fracturing, both technologies are effective in the stimulation of the casing deformation sections, realizing well control reserves efficiently and guaranteeing fracturing effects. Keywords: Shale gas, Horizontal well, Casing deformation, Staged

Emissions trading and firms' strategies. The case of power producers

International Nuclear Information System (INIS)

Rousse, O.

2005-11-01

This thesis deals with the impacts of a domestic emissions trading scheme on firms' strategies. As recent experiences of such programs (Acid Rain Program, RECLAIM Program, NOx Budget Program and the European Union Emissions Trading Scheme) concern mainly heat and power producers, we analyze especially strategies of these companies. In context of electricity market deregulation, our study takes two directions: uncertainty and competitive distortions. Concerning uncertainty, we are interested in portfolio management of emission permits, that is choice under uncertainty between buying, selling and banking permits. Concerning competitive distortions, we consider manipulations on the permits and/or products markets. Among others, we investigate interactions between a pollution market and the wholesale electricity market. From a general point of view, we show that a permits market, even competitive, gives to power producers more opportunities to act strategically on wholesale electricity markets. By this way, our study attempts to indicate when these market distortions are more likely to occur and to give some emissions market design instructions. (author)

A practical model-based statistical approach for generating functional test cases: application in the automotive industry

OpenAIRE

Awédikian , Roy; Yannou , Bernard

2012-01-01

International audience; With the growing complexity of industrial software applications, industrials are looking for efficient and practical methods to validate the software. This paper develops a model-based statistical testing approach that automatically generates online and offline test cases for embedded software. It discusses an integrated framework that combines solutions for three major software testing research questions: (i) how to select test inputs; (ii) how to predict the expected...

Using a Bedside Video-assisted Test Tube Test to Assess Stoma Viability: A Report of 4 Cases.

Science.gov (United States)

Ahmad, Sarwat; Turner, Keli; Shah, Paulesh; Diaz, Jose

2016-07-01

Mucosal discoloration of an intestinal stoma may indicate self-limited venous congestion or necrosis necessitating operative revision. A common bedside technique to assess stoma viability is the "test tube test". A clear tube is inserted into the stoma and a hand-held light is used to assess the color of the stoma. A technique (video-assisted test tube test [VATTT]) developed by the authors utilizes a standard video bronchoscope inserted into a clear plastic blood collection tube to visually inspect and assess the mucosa. This technique was evaluated in 4 patients (age range 49-72 years, all critically ill) with a discolored stoma after emergency surgery. In each case, physical exam revealed ischemic mucosa at the surface either immediately after surgery or after worsening hypotension weeks later. Serial test tube test assessments were ambiguous when trying to assess deeper mucosa. The VATTT assessment showed viable pink mucosa beneath the surface and until the fascia was revealed in 3 patients. One (1) patient had mucosal ischemia down to the fascia, which prompted operative revision of the stoma. The new stoma was assessed with a VATTT and was viable for the entire length of the stoma. VATTT provided an enhanced, magnified, and clearer way to visually assess stoma viability in the postoperative period that can be performed at the bedside with no adverse events. It may prevent unnecessary relaparotomy or enable earlier diagnosis of deep ostomy necrosis. Validity and reliability studies are warranted.

Real options and a large producer: the case of electricity markets

International Nuclear Information System (INIS)

Keppo, J.

2003-01-01

In this paper we extend the real option theory to consider the situation of a large producer and we employ the model to electricity markets. This is important because many producers in these markets affect the market supply and, therefore, also the electricity price. This production price effect influences not only on the assets that the energy company owns but also on its investment opportunities. We show that this production's price effect has to be considered in the investment analysis if the company is not able to hedge the price effect in the financial markets and if there is no competition on the investment opportunity. (author)

Diagnosis of penicillin allergy revisited: the value of case history, skin testing, specific IgE and prolonged challenge.

Science.gov (United States)

Hjortlund, J; Mortz, C G; Skov, P S; Bindslev-Jensen, C

2013-08-01

Skin testing in duplicate, correlation between case history of immediate and nonimmediate reactions and challenge outcome and prolonged oral treatment with penicillin in the diagnostic evaluation of allergic reactions to β-lactam antibiotics, mimicking real-life situations, have only been addressed in few studies. A total of 342 patients suspected of having β-lactam allergy were investigated according to the European Network for Drug Allergy (ENDA) guidelines and patients found to be negative in the ENDA program were supplemented with a 7-day oral treatment with penicillin. Skin testing with penicillins was performed in duplicate. Patients with case histories of reactions to other β-lactams were also subsequently challenged with the culprit drug. Nineteen patients were IgE-sensitized to penicillin. Then, intracutaneous tests (ICTs) were performed, in which 35 patients tested positive for allergy, 21 with delayed and 14 with immediate reactions. Only three patients tested positive for the major (PPL) and/or minor (MDM) penicillin determinants, all being positive for penicillin G in ICT. The remaining 291 patients were challenged with penicillin: 10 tested positive in single-dose challenge and 23 tested positive in the 7-day challenge. A total of 17 of 78 patients with a negative penicillin challenge tested positive during challenges with other β-lactams. We found no correlation between case histories of immediate and nonimmediate reactions and reaction time during challenge. The data suggest that case history is often insufficient to discriminate between immediate reactors and nonimmediate reactors. A 7-day challenge with the culprit β-lactam may yield more positive reactions than the accepted one- or 2-day challenge. Interpretation of skin testing should be made with caution. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

BASHH 2016 UK national audit and survey of HIV testing, risk assessment and follow-up: case note audit.

Science.gov (United States)

Bhaduri, Sumit; Curtis, Hilary; McClean, Hugo; Sullivan, Ann K

2018-01-01

This national audit demonstrated discrepancies between actual practice and that indicated by clinic policies following enquiry about alcohol, recreational drugs and chemsex use. Clinics were more likely to enquire about risk behaviour if this was clinic policy or routine practice. Previous testing was the most common reason for refusing HIV testing, although 33% of men who have sex with men had a prior test of more than three months ago. Of the group declining due to recent exposure in the window period, 21/119 cases had an exposure within the four weeks prior to presentation, but had a previous risk not covered by previous testing. Recommendations include provision of risk assessments for alcohol, recreational drug use and chemsex, documenting reasons for HIV test refusal, provision of HIV point-of-care testing, follow-up for cases at higher risk of HIV and advice about community testing or self-sampling/testing.

Developing a quality by design approach to model tablet dissolution testing: an industrial case study.

Science.gov (United States)

Yekpe, Ketsia; Abatzoglou, Nicolas; Bataille, Bernard; Gosselin, Ryan; Sharkawi, Tahmer; Simard, Jean-Sébastien; Cournoyer, Antoine

2017-11-02

This study applied the concept of Quality by Design (QbD) to tablet dissolution. Its goal was to propose a quality control strategy to model dissolution testing of solid oral dose products according to International Conference on Harmonization guidelines. The methodology involved the following three steps: (1) a risk analysis to identify the material- and process-related parameters impacting the critical quality attributes of dissolution testing, (2) an experimental design to evaluate the influence of design factors (attributes and parameters selected by risk analysis) on dissolution testing, and (3) an investigation of the relationship between design factors and dissolution profiles. Results show that (a) in the case studied, the two parameters impacting dissolution kinetics are active pharmaceutical ingredient particle size distributions and tablet hardness and (b) these two parameters could be monitored with PAT tools to predict dissolution profiles. Moreover, based on the results obtained, modeling dissolution is possible. The practicality and effectiveness of the QbD approach were demonstrated through this industrial case study. Implementing such an approach systematically in industrial pharmaceutical production would reduce the need for tablet dissolution testing.

Using imputed genotype data in the joint score tests for genetic association and gene-environment interactions in case-control studies.

Science.gov (United States)

Song, Minsun; Wheeler, William; Caporaso, Neil E; Landi, Maria Teresa; Chatterjee, Nilanjan

2018-03-01

Genome-wide association studies (GWAS) are now routinely imputed for untyped single nucleotide polymorphisms (SNPs) based on various powerful statistical algorithms for imputation trained on reference datasets. The use of predicted allele counts for imputed SNPs as the dosage variable is known to produce valid score test for genetic association. In this paper, we investigate how to best handle imputed SNPs in various modern complex tests for genetic associations incorporating gene-environment interactions. We focus on case-control association studies where inference for an underlying logistic regression model can be performed using alternative methods that rely on varying degree on an assumption of gene-environment independence in the underlying population. As increasingly large-scale GWAS are being performed through consortia effort where it is preferable to share only summary-level information across studies, we also describe simple mechanisms for implementing score tests based on standard meta-analysis of "one-step" maximum-likelihood estimates across studies. Applications of the methods in simulation studies and a dataset from GWAS of lung cancer illustrate ability of the proposed methods to maintain type-I error rates for the underlying testing procedures. For analysis of imputed SNPs, similar to typed SNPs, the retrospective methods can lead to considerable efficiency gain for modeling of gene-environment interactions under the assumption of gene-environment independence. Methods are made available for public use through CGEN R software package. © 2017 WILEY PERIODICALS, INC.

Positive results of serological tests for syphilis in pregnancy – diagnostic and therapeutic problems, report of two cases

OpenAIRE

Marta Koper; Agnieszka B. Serwin; Anna Baran; Iwona Flisiak

2015-01-01

Introduction. Undiagnosed and untreated syphilis in pregnancy may result in subsequent complications: early fetal loss, stillbirth, low birth weight of infants and newborns with congenital syphilis. Objective. To analyze diagnostic and therapeutic dilemmas of positive results of serological tests for syphilis (STS) in pregnancy. Case reports. We present two cases of pregnant women, hospitalized in our department due to positive results of serological tests for syphilis, pe...

Benchmark test cases for evaluation of computer-based methods for detection of setup errors: realistic digitally reconstructed electronic portal images with known setup errors

International Nuclear Information System (INIS)

Fritsch, Daniel S.; Raghavan, Suraj; Boxwala, Aziz; Earnhart, Jon; Tracton, Gregg; Cullip, Timothy; Chaney, Edward L.

1997-01-01

the visible human CT scans from the National Library of Medicine, are essential for producing realistic images. Sets of test cases with systematic and random errors in selected setup parameters and anatomic volumes are suitable for use as standard benchmarks by the radiotherapy community. In addition to serving as an aid to research and development, benchmark images may also be useful for evaluation of commercial systems and as part of a quality assurance program for clinical systems. Test cases and software are available upon request

Security Testing in Agile Web Application Development - A Case Study Using the EAST Methodology

CERN Document Server

Erdogan, Gencer

2010-01-01

There is a need for improved security testing methodologies specialized for Web applications and their agile development environment. The number of web application vulnerabilities is drastically increasing, while security testing tends to be given a low priority. In this paper, we analyze and compare Agile Security Testing with two other common methodologies for Web application security testing, and then present an extension of this methodology. We present a case study showing how our Extended Agile Security Testing (EAST) performs compared to a more ad hoc approach used within an organization. Our working hypothesis is that the detection of vulnerabilities in Web applications will be significantly more efficient when using a structured security testing methodology specialized for Web applications, compared to existing ad hoc ways of performing security tests. Our results show a clear indication that our hypothesis is on the right track.

Objective effect manifestation of pectus excavatum on load-stressed pulmonary function testing: a case report

Directory of Open Access Journals (Sweden)

Chan Jason

2011-12-01

Full Text Available Abstract Introduction Pectus excavatum is the most common congenital deformity of the anterior chest wall that, under certain conditions, may pose functional problems due to cardiopulmonary compromise and exercise intolerance. Case presentation We present the case of an otherwise physically-adept 21-year-old Chinese sportsman with idiopathic pectus excavatum, whose symptoms manifested only on bearing a loaded body vest and backpack during physical exercise. Corroborative objective evidence was obtained via load-stressed pulmonary function testing, which demonstrated restrictive lung function. Conclusion This report highlights the possible detrimental synergism of thoracic load stress and pectus excavatum on cardiopulmonary function. Thoracic load-stressed pulmonary function testing provides objective evidence in support of such a synergistic relationship.

Simple Algorithms to Calculate Asymptotic Null Distributions of Robust Tests in Case-Control Genetic Association Studies in R

Directory of Open Access Journals (Sweden)

Wing Kam Fung

2010-02-01

Full Text Available The case-control study is an important design for testing association between genetic markers and a disease. The Cochran-Armitage trend test (CATT is one of the most commonly used statistics for the analysis of case-control genetic association studies. The asymptotically optimal CATT can be used when the underlying genetic model (mode of inheritance is known. However, for most complex diseases, the underlying genetic models are unknown. Thus, tests robust to genetic model misspecification are preferable to the model-dependant CATT. Two robust tests, MAX3 and the genetic model selection (GMS, were recently proposed. Their asymptotic null distributions are often obtained by Monte-Carlo simulations, because they either have not been fully studied or involve multiple integrations. In this article, we study how components of each robust statistic are correlated, and find a linear dependence among the components. Using this new finding, we propose simple algorithms to calculate asymptotic null distributions for MAX3 and GMS, which greatly reduce the computing intensity. Furthermore, we have developed the R package Rassoc implementing the proposed algorithms to calculate the empirical and asymptotic p values for MAX3 and GMS as well as other commonly used tests in case-control association studies. For illustration, Rassoc is applied to the analysis of case-control data of 17 most significant SNPs reported in four genome-wide association studies.

A new impedance based approach to test the activity of recombinant protein--Semaphorins as a test case.

Science.gov (United States)

Birger, Anastasya; Besser, Elazar; Reubinoff, Benjamin; Behar, Oded

2015-10-01

The biological activity of a recombinant protein is routinely measured using a bioassay such as an enzyme assay. However, many proteins have no enzymatic activity and in many cases it is difficult to devise a simple and reliable approach to test their activity. Semaphorins, Ephrins, Slits, Netrins or amylin-assisted proteins have numerous activities affecting many systems and cell types in the human body. Most of them are also able to induce rapid cytoskeleton changes at least in some cell types. We assumed therefore, that such proteins might be tested based on their ability to modulate the cytoskeleton. Here we tested a number of semaphorins in an impedance based label-free platform that allows for dynamic monitoring of subtle morphological and adhesive changes. This system has proved to be a very fast, sensitive and effective way to monitor and determine the activity of such proteins. Furthermore we showed that it is possible to customize a cell-protein system by transfecting the cells with specific receptors and test the cell response following the addition of the recombinant ligand protein. Since other protein families such as Ephrins and Netrins can also influence the cytoskeleton of some cells, this approach may be applicable to a large number of proteins. Copyright © 2015 Elsevier GmbH. All rights reserved.

ADVANCED STRIPPER GAS PRODUCED WATER REMEDIATION

International Nuclear Information System (INIS)

Ray W. Sheldon

2001-01-01

Natural gas and oil production from stripper wells also produces water contaminated with hydrocarbons, and in most locations, salts and trace elements. The hydrocarbons are not generally present in concentrations that allow the operator to economically recover these liquids. Produced liquids, (stripper gas water) which are predominantly water, present the operator with two options; purify the water to acceptable levels of contaminates, or pay for the disposal of the water. The project scope involves testing SynCoal as a sorbent to reduce the levels of contamination in stripper gas well produced water to a level that the water can be put to a productive use. Produced water is to be filtered with SynCoal, a processed sub-bituminous coal. It is expected that the surface area of and in the SynCoal would sorb the hydrocarbons and other contaminates and the effluent would be usable for agricultural purposes. Test plan anticipates using two well locations described as being disparate in the level and type of contaminates present. The loading capacity and the rate of loading for the sorbent should be quantified in field testing situations which include unregulated and widely varying liquid flow rates. This will require significant flexibility in the initial stages of the investigation. The scope of work outlined below serves as the guidelines for the testing of SynCoal carbon product as a sorbent to remove hydrocarbons and other contaminants from the produced waters of natural gas wells. A maximum ratio of 1 lb carbon to 100 lbs water treated is the initial basis for economic design. While the levels of contaminants directly impact this ratio, the ultimate economics will be dictated by the filter servicing requirements. This experimental program is intended to identify those treatment parameters that yield the best technological practice for a given set of operating conditions. The goal of this research is to determine appropriate guidelines for field trials by accurately

Computer vision for automatic inspection of agricultural produce

Science.gov (United States)

Molto, Enrique; Blasco, Jose; Benlloch, Jose V.

1999-01-01

Fruit and vegetables suffer different manipulations from the field to the final consumer. These are basically oriented towards the cleaning and selection of the product in homogeneous categories. For this reason, several research projects, aimed at fast, adequate produce sorting and quality control are currently under development around the world. Moreover, it is possible to find manual and semi- automatic commercial system capable of reasonably performing these tasks.However, in many cases, their accuracy is incompatible with current European market demands, which are constantly increasing. IVIA, the Valencian Research Institute of Agriculture, located in Spain, has been involved in several European projects related with machine vision for real-time inspection of various agricultural produces. This paper will focus on the work related with two products that have different requirements: fruit and olives. In the case of fruit, the Institute has developed a vision system capable of providing assessment of the external quality of single fruit to a robot that also receives information from other senors. The system use four different views of each fruit and has been tested on peaches, apples and citrus. Processing time of each image is under 500 ms using a conventional PC. The system provides information about primary and secondary color, blemishes and their extension, and stem presence and position, which allows further automatic orientation of the fruit in the final box using a robotic manipulator. Work carried out in olives was devoted to fast sorting of olives for consumption at table. A prototype has been developed to demonstrate the feasibility of a machine vision system capable of automatically sorting 2500 kg/h olives using low-cost conventional hardware.

Who Produces Ianthelline? The Arctic Sponge Stryphnus fortis or its Sponge Epibiont Hexadella dedritifera: a Probable Case of Sponge-Sponge Contamination.

Science.gov (United States)

Cárdenas, Paco

2016-04-01

The bromotyrosine derivative ianthelline was isolated recently from the Atlantic boreo-arctic deep-sea sponge Stryphnus fortis, and shown to have clear antitumor and antifouling effects. However, chemosystematics, field observations, and targeted metabolic analyses (using UPLC-MS) suggest that ianthelline is not produced by S. fortis but by Hexadella dedritifera, a sponge that commonly grows on S. fortis. This case highlights the importance of combining taxonomic and ecological knowledge to the field of sponge natural products research.

A comparison of fitness-case sampling methods for genetic programming

Science.gov (United States)

Martínez, Yuliana; Naredo, Enrique; Trujillo, Leonardo; Legrand, Pierrick; López, Uriel

2017-11-01

Genetic programming (GP) is an evolutionary computation paradigm for automatic program induction. GP has produced impressive results but it still needs to overcome some practical limitations, particularly its high computational cost, overfitting and excessive code growth. Recently, many researchers have proposed fitness-case sampling methods to overcome some of these problems, with mixed results in several limited tests. This paper presents an extensive comparative study of four fitness-case sampling methods, namely: Interleaved Sampling, Random Interleaved Sampling, Lexicase Selection and Keep-Worst Interleaved Sampling. The algorithms are compared on 11 symbolic regression problems and 11 supervised classification problems, using 10 synthetic benchmarks and 12 real-world data-sets. They are evaluated based on test performance, overfitting and average program size, comparing them with a standard GP search. Comparisons are carried out using non-parametric multigroup tests and post hoc pairwise statistical tests. The experimental results suggest that fitness-case sampling methods are particularly useful for difficult real-world symbolic regression problems, improving performance, reducing overfitting and limiting code growth. On the other hand, it seems that fitness-case sampling cannot improve upon GP performance when considering supervised binary classification.

Investigation of Nonlinear Site Response and Seismic Compression from Case History Analysis and Laboratory Testing

Science.gov (United States)

Yee, Eric

In this thesis I address a series of issues related to ground failure and ground motions during earthquakes. A major component is the evaluation of cyclic volumetric strain behavior of unsaturated soils, more commonly known as seismic compression, from advanced laboratory testing. Another major component is the application of nonlinear and equivalent linear ground response analyses to large-strain problems involving highly nonlinear dynamic soil behavior. These two components are merged in the analysis of a truly unique and crucial field case history of nonlinear site response and seismic compression. My first topic concerns dynamic soil testing for relatively small strain dynamic soil properties such as threshold strains, gammatv. Such testing is often conducted using specialized devices such as dual-specimen simple-shear, as devices configured for large strain testing produce noisy signals in the small strain range. Working with a simple shear device originally developed for large-strain testing, I extend its low-strain capabilities by characterizing noisy signals and utilizing several statistical methods to extract meaningful responses in the small strain range. I utilize linear regression of a transformed variable to estimate the cyclic shear strain from a noisy signal and the confidence interval on its amplitude. I utilize Kernel regression with the Nadaraya-Watson estimator and a Gaussian kernel to evaluate vertical strain response. A practical utilization of these techniques is illustrated by evaluating threshold shear strains for volume change with a procedure that takes into account uncertainties in the measured shear and vertical strains. My second topic concerns the seismic compression characteristics of non-plastic and low-plasticity silty sands with varying fines content (10 ≤ FC ≤ 60%). Simple shear testing was performed on various sand-fines mixtures at a range of modified Proctor relative compaction levels ( RC) and degrees-of-saturation (S

Testing the performance of a blind burst statistic

Energy Technology Data Exchange (ETDEWEB)

Vicere, A [Istituto di Fisica, Universita di Urbino (Italy); Calamai, G [Istituto Nazionale di Fisica Nucleare, Sez. Firenze/Urbino (Italy); Campagna, E [Istituto Nazionale di Fisica Nucleare, Sez. Firenze/Urbino (Italy); Conforto, G [Istituto di Fisica, Universita di Urbino (Italy); Cuoco, E [Istituto Nazionale di Fisica Nucleare, Sez. Firenze/Urbino (Italy); Dominici, P [Istituto di Fisica, Universita di Urbino (Italy); Fiori, I [Istituto di Fisica, Universita di Urbino (Italy); Guidi, G M [Istituto di Fisica, Universita di Urbino (Italy); Losurdo, G [Istituto Nazionale di Fisica Nucleare, Sez. Firenze/Urbino (Italy); Martelli, F [Istituto di Fisica, Universita di Urbino (Italy); Mazzoni, M [Istituto Nazionale di Fisica Nucleare, Sez. Firenze/Urbino (Italy); Perniola, B [Istituto di Fisica, Universita di Urbino (Italy); Stanga, R [Istituto Nazionale di Fisica Nucleare, Sez. Firenze/Urbino (Italy); Vetrano, F [Istituto di Fisica, Universita di Urbino (Italy)

2003-09-07

In this work, we estimate the performance of a method for the detection of burst events in the data produced by interferometric gravitational wave detectors. We compute the receiver operating characteristics in the specific case of a simulated noise having the spectral density expected for Virgo, using test signals taken from a library of possible waveforms emitted during the collapse of the core of type II supernovae.

A Test Generation Framework for Distributed Fault-Tolerant Algorithms

Science.gov (United States)

Goodloe, Alwyn; Bushnell, David; Miner, Paul; Pasareanu, Corina S.

2009-01-01

Heavyweight formal methods such as theorem proving have been successfully applied to the analysis of safety critical fault-tolerant systems. Typically, the models and proofs performed during such analysis do not inform the testing process of actual implementations. We propose a framework for generating test vectors from specifications written in the Prototype Verification System (PVS). The methodology uses a translator to produce a Java prototype from a PVS specification. Symbolic (Java) PathFinder is then employed to generate a collection of test cases. A small example is employed to illustrate how the framework can be used in practice.

DECOVALEX I - Test Case 1: Coupled stress-flow model

International Nuclear Information System (INIS)

Rosengren, L.; Christianson, M.

1995-12-01

This report presents the results of the coupled stress-flow model, test case 1 of Decovalex. The model simulates the fourth loading cycle of a coupled stress-flow test and subsequent shearing up to and beyond peak shear resistance. The first loading sequence (A) consists of seven normal loading steps: 0, 5, 15, 25, 15, 5, 0 MPa. The second loading sequence (B) consists of the following eight steps: unstressed state, normal boundary loading of 25 MPa (no shearing), and then shearing of 0.5, 0.8, 2, 4, 2, 0 mm. Two different options regarding the rock joint behaviour were modeled in accordance with the problem definition. In option 1 a linear elastic joint model with Coulomb slip criterion was used. In option 2 a non-linear empirical (i.e. Barton-Bandis) joint model was used. The hydraulic condition during both load sequence A and B was a constant head of 5 m at the inlet point and 0 m at the outlet point. All model runs presented in this report were performed using the two-dimensional distinct element computer code UDEC, version 1.8. 30 refs, 36 figs

Specific antigen serologic tests in leprosy: implications for epidemiological surveillance of leprosy cases and household contacts.

Science.gov (United States)

Carvalho, Ana Paula Mendes; Coelho, Angélica da Conceição Oliveira; Correa-Oliveira, Rodrigo; Lana, Francisco Carlos Félix

2017-09-01

There is a lack of straightforward tests for field application and known biomarkers for predicting leprosy progression in infected individuals. The aim was to analyse the response to infection by Mycobacterium leprae based on the reactivity of specific antigens: natural disaccharide linked to human serum albumin via an octyl (NDOHSA), a semisynthetic phenolic glycolipid-I (PGL-I); Leprosy Infectious Disease Research Institute Diagnostic-1 (LID-1) and natural disaccharide octyl - Leprosy Infectious Disease Research Institute Diagnostic-1 (NDOLID). The study population consisted of 130 leprosy cases diagnosed between 2010 and 2015 and 277 household contacts. An enzyme-linked immunosorbent assay (ELISA) was used to analyse the reactivity of antibodies against NDOHSA, LID-1 and NDOLID. The samples and controls were tested in duplicate, and the antibody titer was expressed as an ELISA index. Data collection was made by home visits with application of questionnaire and dermatological evaluation of all household contacts to identify signs and symptoms of leprosy. Significant differences in the median ELISA results were observed among leprosy cases in treatment, leprosy cases that had completed treatment and household contacts. Higher proportions of seropositivity were observed in leprosy cases in treatment. Seropositivity was also higher in multibacillary in relation to paucibacillary, with the difference reaching statistical significance. Lower titers were observed among cases with a longer treatment time or discharge. For household contacts, the differences according to the clinical characteristics of the leprosy index case were less pronounced than expected. Other factors, such as the endemicity of leprosy, exposure outside the residence and genetic characteristics, appeared to have a greater influence on the seropositivity. Serologic tests could be used as auxiliary tools for determining the operational classification, in addition to identifying infected individuals

Characteristics of bacteremia caused by extended-spectrum beta-lactamase-producing Proteus mirabilis.

Science.gov (United States)

Kurihara, Yoko; Hitomi, Shigemi; Oishi, Tsuyoshi; Kondo, Tsukasa; Ebihara, Tsugio; Funayama, Yasunori; Kawakami, Yasushi

2013-10-01

Although Proteus mirabilis is a common human pathogen, bacteremia caused by the organism, especially strains producing extended-spectrum beta-lactamase (ESBL), has rarely been investigated. We examined 64 cases of P. mirabilis bacteremia identified in the Minami Ibaraki Area, Japan, between 2001 and 2010 and compared the characteristics of cases with ESBL-producing and ESBL-non-producing strains (13 and 51 cases, respectively). All ESBL-producing strains with the gene encoding the CTX-M-2-group were genetically nonidentical. Isolation of ESBL-producing strains was significantly associated with onset in a hospital (p = 0.030), receiving hemodialysis (p = 0.0050), and previous antibiotic use within 1 month (p = 0.036; especially penicillin and/or cephalosporin (p = 0.010) and fluoroquinolone (p = 0.0069)). Isolation was also associated with inappropriate antibiotic therapy on the 1st and 4th days (p = 0.011 and 0.032, respectively) but not with mortality on the 30th day. These findings indicate that, for P. mirabilis bacteremia, isolation of ESBL-producing strains causes delay of initiating appropriate antimicrobial therapy but may not be associated with mortality.

Development and test of a new concept for biomass producer gas engines

Energy Technology Data Exchange (ETDEWEB)

Ahrenfeldt, J.; Vendelbo Foged, E.; Strand, R.; Birk Henriksen, U.

2010-02-15

The technical requirements and the economical assessment of converting commercial diesel engine gen-sets into high compression spark ignition operation on biomass producer gas have been investigated. Assessments showed that for a 200 kW{sub e} gen-set there would be a financial benefit of approximately 600.000 DKK corresponding to a reduction of 60% in investment costs compared to the price of a conventional gas engine gen-set. Experimental investigations have been conducted on two identical small scale SI gas engine gen-sets operating on biomass producer gas from thermal gasification of wood. The engines were operated with two different compression ratios, one with the original compression ratio for natural gas operation 9.5:1, and the second with a compression ratio of 18.5:1 (converted diesel engine). It was shown that high compression ratio SI engine operation was possible when operating on this specific biomass producer gas. The results showed an increase in the electrical efficiency from 30% to 34% when the compression ratio was increased. (author)

High-energy test of proton radiography concepts

International Nuclear Information System (INIS)

Amann, J.F.; Atencio, L.G.; Espinoza, C.J.

1997-01-01

This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The goal of this work was to demonstrate the use of high energy protons to produce radiographs of heavy metal test objects. The authors executed a proof-of-principle experiment using GeV proton beams available at the Brookhaven National Laboratory Alternating Gradient Synchrotron (AGS). The experiment produced proton radiographs of a suitably dense, unclassified test object. The experiment tested capabilities in data collection, image reconstruction, and hydro-code simulation and validated models of high-energy proton radiography. A lens was designed using existing quadrupole magnets, constructed on the A1 beam line of the AGS and used to image 10-GeV protons. The results include: (1) images made with an integrating detector, (2) measurements of the background and measurements of the resolution functions, and (3) forward model fits to the transmission data. In all cases the results agree with initial estimates and provide strong support for the utility of proton radiography as a new hydrotest diagnostic

Data report of a tight-lattice rod bundle thermal-hydraulic tests (1). Base case test using 37-rod bundle simulated water-cooled breeder reactor (Contract research)

International Nuclear Information System (INIS)

Kureta, Masatoshi; Tamai, Hidesada; Liu, Wei; Akimoto, Hajime; Sato, Takashi; Watanabe, Hironori; Ohnuki, Akira

2006-03-01

Japan Atomic Energy Agency has been performing tight-lattice rod bundle thermal-hydraulic tests to realize essential technologies for the technological and engineering feasibility of super high burn-up water-cooled breeder reactor featured by a high breeding ratio and super high burn-up by reducing the core water volume in water-cooled reactor. The tests are performing to make clear the fundamental subjects related to the boiling transition (BT) (Subjects: BT criteria under a highly tight-lattice rod bundle, effects of gap-width between rods and of rod-bowing) using 37-rod bundles (Base case test section (1.3mm gap-width), Two parameter effect test sections (Gap-width effect one (1.0mm) and Rod-bowing one)). In the present report, we summarize the test results from the base case test section. The thermal-hydraulic characteristics using the large scale test section were obtained for the critical power, the pressure drop and the wall heat transfer under a wide range of pressure, flow rate, etc. including normal operational conditions of the designed reactor. Effects of local peaking factor on the critical power were also obtained. (author)

Pumping tests in nonuniform aquifers - The radially symmetric case

Science.gov (United States)

Butler, J.J.

1988-01-01

Traditionally, pumping-test-analysis methodology has been limited to applications involving aquifers whose properties are assumed uniform in space. This work attempts to assess the applicability of analytical methodology to a broader class of units with spatially varying properties. An examination of flow behavior in a simple configuration consisting of pumping from the center of a circular disk embedded in a matrix of differing properties is the basis for this investigation. A solution describing flow in this configuration is obtained through Laplace-transform techniques using analytical and numerical inversion schemes. Approaches for the calculation of flow properties in conditions that can be roughly represented by this simple configuration are proposed. Possible applications include a wide variety of geologic structures, as well as the case of a well skin resulting from drilling or development. Of more importance than the specifics of these techniques for analysis of water-level responses is the insight into flow behavior during a pumping test that is provided by the large-time form of the derived solution. The solution reveals that drawdown during a pumping test can be considered to consist of two components that are dependent and independent of near-well properties, respectively. Such an interpretation of pumping-test drawdown allows some general conclusions to be drawn concerning the relationship between parameters calculated using analytical approaches based on curve-matching and those calculated using approaches based on the slope of a semilog straight line plot. The infinite-series truncation that underlies the semilog analytical approaches is shown to remove further contributions of near-well material to total drawdown. In addition, the semilog distance-drawdown approach is shown to yield an expression that is equivalent to the Thiem equation. These results allow some general recommendations to be made concerning observation-well placement for pumping

Depth-dependent groundwater quality sampling at City of Tallahassee test well 32, Leon County, Florida, 2013

Science.gov (United States)

McBride, W. Scott; Wacker, Michael A.

2015-01-01

Public-supply wells sometimes produce water of less than desirable quality because contaminants can migrate to the open interval of wells through preferential pathways. If these pathways can be identified, zones that produce poor quality water can be excluded during the well-construction process. The U.S. Geological Survey has developed geophysical testing methods that can be used to delineate zones of high permeability in test wells. Once the highly permeable zones are identified, water-quality data can be collected from each zone to identify whether any of the zones produce water of poor quality. The zones producing poor quality water can then be cased off in the final well design so that they do not contribute flow to the production well, reducing subsequent water-treatment costs.

Atmospheric signals produced by cavity rebound

International Nuclear Information System (INIS)

Jones, E.M.; App, F.N.; Whitaker, R.W.

1993-01-01

An analysis of the atmospheric acoustic signals produced by a class of low-yield tests conducted just below the base of the alluvial cover in Yucca Flat of the Nevada Test Site (NTS), has revealed a clear manifestation of an elastic, cavity rebound signal. We use modeling as the basis for understanding the observed phenomena

Hypersonic ground test capabilities for T and E testing above mach 8 ''a case where S and T meets T and E''

International Nuclear Information System (INIS)

Constantino, M; Miles, R; Brown, G; Laster, M; Nelson, G

1999-01-01

Simulation of hypersonic flight in ground test and evaluation (T and E) facilities is a challenging and formidable task, especially to fully duplicate the flight environment above approximately Mach 8 for most all hypersonic flight systems that have been developed, conceived, or envisioned. Basically, and for many years, the enabling technology to build such a ground test wind tunnel facility has been severely limited in the area of high-temperature, high-strength materials and thermal protection approaches. To circumvent the problems, various approaches have been used, including partial simulation and use of similarity laws and reduced test time. These approaches often are not satisfactory, i.e. operability and durability testing for air-breathing propulsion development and thermal protection development of many flight systems. Thus, there is a strong need for science and technology (S and T) community involvement in technology development to address these problems. This paper discusses a specific case where this need exists and where significant S and T involvement has made and continues to make significant contributions. The case discussed will be an Air Force research program currently underway to develop enabling technologies for a Mach 8-15 hypersonic true temperature wind tunnel with relatively long run time. The research is based on a concept proposed by princeton University using radiant or beamed energy into the supersonic nozzle flow

A Case of Fundus Oculi Albinoticus Diagnosed as Angelman Syndrome by Genetic Testing

Directory of Open Access Journals (Sweden)

Yurie Fukiyama

2018-02-01

Full Text Available Purpose: To report a case of fundus oculi albinoticus diagnosed as Angelman syndrome (AS via genetic testing. Case Report: This study reports on a 4-year-old boy. Since he had been having respiratory disturbance since birth, he underwent a complete physical examination to investigate the cause. The results indicated that he had various brain congenital abnormalities, such as a thin corpus callosum, as well as hydronephrosis, an atrial septal defect, and skin similar to patients with fundus oculi albinoticus. Examination revealed bilateral fundus oculi albinoticus, mild iridic hypopigmentation, optic atrophy, and poor visual tracking. Genetic testing revealed a deletion in the Prader-Willi syndrome/AS region on chromosome 15, and together with the results of methylation analysis, his condition was diagnosed as AS. Follow-up examinations revealed no change in the fundus oculi albinoticus and optic atrophy, nor did they indicate poor visual tracking. Conclusions: When fundus oculi albinoticus and optic atrophy are observed in patients with multiple malformations, AS should be considered as a differential diagnosis.

Agricultural residues as fuel for producer gas generation

Energy Technology Data Exchange (ETDEWEB)

Hoeglund, C

1981-01-01

This paper reports on results from a series of tests with four different types of agricultural residues as fuel for producer gas generation. The fuels are coconut shells, coconut husks, pelletized wheat-straw and pressed sugar cane. The tests were made with a 73 Hp (50 kW) agricultural tractor diesel engine equipped with a standard gasifier developed for wood chips in Sweden, and run on a testbed at the Swedish National Machinery Testing Institute. The engine was operated on approximately 10% diesel oil and 90% producer gas. The gas composition, its calorific value and temperature, the pressure drop and the engine power were monitored. Detailed elementary analysis of the fuel and gas were carried out. Observations were also made regarding the important aspects of bridging and slagging in the gasifier. The tests confirmed that coconut shells make an excellent fuel for producer gas generation. After 8 hours of running no problems with slags and bridging were experienced. Coconut husks showed no bridging but some slag formation. The gasifier operated satisfactorily for this fuel. Pelletized wheat straw and pressed sugar cane appeared unsuitable as fuel in the unmodified test gasifier (Type F 300) due to slag formation. It is important to note, however, that the present test results are not optimal for any of the fuels used, the gasifier being designed for wood-chips and not for the test-fuels used. Tests using approximately modified gasifiers are planned for the future.

Unconsented HIV testing in cases of occupational exposure: ethics, law, and policy.

Science.gov (United States)

Cowan, Ethan; Macklin, Ruth

2012-10-01

Postexposure prophylaxis (PEP) has substantially reduced the risk of acquiring human immunodeficiency virus (HIV) after an occupational exposure; nevertheless, exposure to HIV remains a concern for emergency department providers. According to published guidelines, PEP should be taken only when source patients are HIV-positive or have risk factors for HIV. Initiating PEP when source patients are uninfected puts exposed persons at risk from taking toxic drugs with no compensating benefit. Forgoing PEP if the source is infected results in increased risk of acquiring HIV. What should be done if source patients refuse HIV testing? Is it justifiable to test the blood of these patients over their autonomous objection? The authors review current law and policy and perform an ethical analysis to determine if laws permitting unconsented testing in cases of occupational exposure can be ethically justified. © 2012 by the Society for Academic Emergency Medicine.

NNDSS - Table II. Carbapenemase-producing carbapenem-resistant Enterobacteriaceae

Data.gov (United States)

U.S. Department of Health & Human Services — NNDSS - Table II. Carbapenemase-producing carbapenem-resistant Enterobacteriaceae - 2018. In this Table, provisional cases of selected notifiable diseases (≥1,000...

Homeopathic pathogenetic trials produce specific symptoms different from placebo.

Science.gov (United States)

Möllinger, Heribert; Schneider, Rainer; Walach, Harald

2009-04-01

Homeopathy uses information gathered from healthy volunteers taking homeopathic substances (pathogenetic trials) for clinical treatment. It is controversial whether such studies produce symptoms different from those produced by placebo. To test whether homeopathic preparations produce different symptoms than placebo in healthy volunteers. Three armed, double-blind, placebo controlled randomised experimental pathogenetic study in 25 healthy volunteers who took either one of two homeopathic remedies, Natrum muriaticum and Arsenicum album in 30CH or identical placebo. Main outcome parameter was the number of remedy-specific symptoms per group. On average, 6 symptoms typical for Arsenicum album were experienced by participants taking arsenicum album, 5 symptoms typical for Natrum muriaticum by those taking natrum muriaticum, and 11 non-specific symptoms by those in the placebo group. Differences were significant overall (Kruskall Wallis test, p = 0.0002,) and significantly different from placebo (Mann-Whitney test, p = 0.001). Homeopathic remedies produce different symptoms than placebo. Copyright (c) 2009 S. Karger AG, Basel.

Cystic fibrosis of the pancreas with test of negative iontophoresis. Case study and literature revision

International Nuclear Information System (INIS)

Jaramillo B, Lina

2000-01-01

A case study is presented about a 6-month-old infant with repetitive respiratory symptoms. It is documented as cystic fibrosis, even though traditional diagnostic criteria are not met, such as a negative iontophoresis. The possible causes of this case are discussed, as well as diagnostic alternatives in these circumstances. Even though the iontophoresis test is negative the need to not eliminate this disease especially when the symptoms are very suspicious, is insisted greatly

Biological Activities of Tetrodotoxin-Producing Enterococcus faecium AD1 Isolated from Puffer Fishes

Directory of Open Access Journals (Sweden)

Tu Hoang Khue Nguyen

2015-01-01

Full Text Available Puffer fishes were collected from the central sea in Vietnam from spring to summer season. The eggs were incubated in MRS broth that was used to test the toxicity in mice and isolate the lactic acid bacteria community that could produce tetrodotoxin (TTX. Thin layer chromatography (TLC and high performance lipid chromatography (HPLC were used to detect and quantify TTX. As a result, Enterococcus faecium AD1 which was identified by biochemical test and 16S rRNA analysis could produce TTX 0.3 mg/mL when cultured in MRS broth. The bacterium was optimized for TTX production and gave 0.18 mg/mL, 0.07 mg/mL, and 0.15 mg/mL in media prepared from the meat-washing water of freshwater fishes (Pangasius bocourti, Oreochromis sp. and sea fish (Auxis thazard, respectively, that are also hopeful to answer some poisoning cases related to eating fishes. Enterococcus faecium also showed the wide antimicrobial activities on yeast, Gram-negative and -positive bacteria. Extracted exopolysaccharide (EPS that reacted with 2,2-diphenyl-1-picrylhydrazyl to give IC50 at 5 mg/mL equaled 11 mg/mL ascorbic acid which could show effects on Hela-6 and Hep G2 using sulforhodamine B test. Enterococcus faecium can be claimed as a promising source in tetrodotoxin and biological compounds.

Tekna's produced water conference 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The conference has 22 presentations discussing topics on discharge reduction, produced water quality, produced water re-injection, chemicals particularly environmentally friendly ones, separation technology, reservoir souring, total water management systems, pollution, oil in water problems and platform operation. Various field tests and experiences particularly from the offshore petroleum sector are presented (tk)

Developing and pilot testing of a tool for "clinicosocial case study" assessment of community medicine residents.

Science.gov (United States)

Gohel, Manisha; Singh, Uday Shankar; Bhanderi, Dinesh; Phatak, Ajay

2016-01-01

Practical and clinical skills teaching should constitute a core part of the postgraduate curriculum of Community Medicine. The clinicosocial case study is a method to enhance learners' skills but there is no generally accepted organized system of formative assessment and structured feedback to guide students. A new tool based on the principles of mini-Clinical Evaluation Exercise (mini CEX) was developed and pilot tested as a 'clinicosocial case study' assessment of community medicine residents with feedback as a core component. Ten core domains of clinicosocial skills were identified after reviewing the relevant literature and input from local experts in community medicine and medical education. We pilot tested the tool with eight faculty members to assess five residents during clinicosocial case presentations on a variety of topics. Kappa statistic and Bland Altman plots were used to assess agreement between faculty members' average assessment scores. Cronbach's alpha was used to test the internal consistency with faculty members as domains. All 95% confidence limits using the Bland-Altman method were within the predetermined limit of 2 points. The overall Kappa between two faculty members was fair ranging from 0.2 to 0.3. Qualitative feedback revealed that both faculty and residents were enthusiastic about the process but faculty suggested further standardization, while residents suggested streamlining of the process. This new assessment tool is available for objective and unbiased assessment of residents through 'clinicosocial case study,' which enriches learning through comprehensive feedback. Further validation in different settings is needed.

Case report: BRCA in the Ashkenazi population: are current testing guidelines too exclusive?

Directory of Open Access Journals (Sweden)

Saunders Katherine H

2011-06-01

Full Text Available Abstract The BRCA1/2 genes account for a significant portion of hereditary breast and ovarian cancers and they are especially prevalent in the Ashkenazi Jewish population. Women who have a mutation can prevent breast and ovarian cancer with surgical intervention. We describe an Ashkenazi Jewish patient who illustrates that current testing criteria are too restrictive, particularly for this population of patients. The patient's sister was diagnosed with breast cancer at age 33; however, she was not a mutation carrier. Based on practice guidelines, the patient was not recommended genetic testing. She subsequently underwent direct-to-consumer (DTC testing and discovered that she was a mutation carrier. This case demonstrates the need for clinicians to be aware of the higher prevalence of BRCA mutations in the Ashkenazi population. It also exemplifies the need to involve medical professionals, including genetic counselors, in the dissemination of DNA test results.

Testing Pneumonia Vaccines in the Elderly: Determining a Case Definition for Pneumococcal Pneumonia in the Absence of a Gold Standard.

Science.gov (United States)

Jokinen, Jukka; Snellman, Marja; Palmu, Arto A; Saukkoriipi, Annika; Verlant, Vincent; Pascal, Thierry; Devaster, Jeanne-Marie; Hausdorff, William P; Kilpi, Terhi M

2017-12-15

Clinical assessments of vaccines to prevent pneumococcal (Pnc) community-acquired pneumonia (CAP) require sensitive and specific case definitions, but there is no gold standard diagnostic test. To develop a new case definition suitable for vaccine efficacy studies, we applied latent class analysis (LCA) to the results from seven diagnostic tests for Pnc etiology on clinical specimens from 323 elderly radiologically-confirmed pneumonia cases enrolled in The Finnish Community-Acquired Pneumonia Epidemiology study during 2005-2007. Compared to the conventional use of LCA, which is mainly to determine sensitivities and specificities of different tests, we instead used LCA as an appropriate instrument to predict the probability of Pnc etiology for each CAP case based on their test profiles, and utilized the predictions to minimize the sample size that would be needed for a vaccine efficacy trial. When compared to the conventional laboratory criteria of encapsulated Pnc in blood culture or in high-quality sputum culture or urine antigen positivity, our optimized case definition for PncCAP resulted in a trial sample size which was almost 20,000 subjects smaller. We believe that our novel application of LCA detailed here to determine a case definition for PncCAP could also be similarly applied to other diseases without a gold standard. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health.

A case of natalizumab-associated progressive multifocal leukoencephalopathy with repeated negative CSF JCV testing.

Science.gov (United States)

Mazda, Monica E; Brosch, Jared R; Wiens, Andrea L; Bonnin, José M; Kamer, Aaron P; Mattson, David H; Snook, Riley J

2013-05-01

The development of progressive multifocal leukoencephalopathy (PML) in patients treated with natalizumab is a well-known potential risk. Diagnosis of PML can be confounded in patients with multiple sclerosis (MS) if new demyelinating lesions develop, and the sensitivity of existing diagnostic tests is less than ideal. In the case presented here, four samples of cerebrospinal fluid tested negative for John Cunningham virus (JCV) DNA by polymerase chain reaction, yet brain biopsy eventually proved positive by immunohistochemistry. A review of the limitations of existing clinical diagnostic tests is addressed, and we review the most recent literature on the proper management of natalizumab-treated MS patients.

A test and calibration setup for mass-produced proportional chambers

International Nuclear Information System (INIS)

Burov, S.; Galaktionov, Yu.; Kamyshkov, Yu.

1987-01-01

The L3 experiment, presently being installed at (CERN) will use a 300 Hadron Calorimeter made of depleted uranium plates interleaved with about 8.000 proportional chambers. The review of experience in the use of gamma radioactivity of depleted uranium for the test of the chambers which are now being built at ITEP is given. The depleted uranium radioactivity and the response of a proportional chamber are discussed. A description of the test setup is given and a method to test the uniformity of the chamber response is discussed. Finally, a procedure for the L3 hadron calorimeter calibration in situ using uranium radioactivity is proposed

Dysphagia produced by cervical spine osteophyte. A case report

Directory of Open Access Journals (Sweden)

Claudio Silveri

2014-01-01

Full Text Available We present a case of a 73-year-old male patient with progressive dysphagia, and hoarseness (irritability in the throat. He was studied with the appropriate imaging techniques, and esophagoscopy led to a diagnosis of extrinsic esophageal dysphagia for osteophyte obstruction of the cervical spine due to the arthrosis. A surgical resection was performed, without complications. Some considerations are given on this theme.

A Testing Framework for Critical Space SW

Science.gov (United States)

Fernandez, Ignacio; Di Cerbo, Antonio; Dehnhardt, Erik; Massimo, Tipaldi; Brünjes, Bernhard

2015-09-01

This paper describes a testing framework for critical space SW named Technical Specification Validation Framework (TSVF). It provides a powerful and flexible means and can be used throughout the SW test activities (test case specification & implementation, test execution and test artifacts analysis). In particular, tests can be run in an automated and/or step-by-step mode. The TSVF framework is currently used for the validation of the Satellite Control Software (SCSW), which runs on the Meteosat Third Generation (MTG) satellite on-board computer. The main purpose of the SCSW is to control the spacecraft along with its various subsystems (AOCS, Payload, Electrical Power, Telemetry Tracking & Command, etc.) in a way that guarantees a high degree of flexibility and autonomy. The TSVF framework serves the challenging needs of the SCSW project, where a plan-driven approach has been combined with an agile process in order to produce preliminary SW versions (with a reduced scope of implemented functionality) in order to fulfill the stakeholders needs ([1]). The paper has been organised as follows. Section 2 gives an overview of the TSVF architecture and interfaces versus the test bench along with the technology used for its implementation. Section 3 describes the key elements of the XML based language for the test case implementation. Section 4 highlights all the benefits compared to conventional test environments requiring a manual test script development, whereas section 5 concludes the paper.

Performance of baker's yeast produced using date syrup substrate ...

African Journals Online (AJOL)

Baker's yeast was produced from three selected baker's yeast strains using date syrup as a substrate at low and high flow rate compared to those produced using molasses substrates. Performance of the produced baker's yeasts on Arabic bread quality was investigated. Baking tests showed a positive relationship between ...

Enhancing TB case detection: experience in offering upfront Xpert MTB/RIF testing to pediatric presumptive TB and DR TB cases for early rapid diagnosis of drug sensitive and drug resistant TB.

Directory of Open Access Journals (Sweden)

Neeraj Raizada

Full Text Available Diagnosis of pulmonary tuberculosis (PTB in children is challenging due to difficulties in obtaining good quality sputum specimens as well as the paucibacillary nature of disease. Globally a large proportion of pediatric tuberculosis (TB cases are diagnosed based only on clinical findings. Xpert MTB/RIF, a highly sensitive and specific rapid tool, offers a promising solution in addressing these challenges. This study presents the results from pediatric groups taking part in a large demonstration study wherein Xpert MTB/RIF testing replaced smear microscopy for all presumptive PTB cases in public health facilities across India.The study covered a population of 8.8 million across 18 programmatic sub-district level tuberculosis units (TU, with one Xpert MTB/RIF platform established at each study TU. Pediatric presumptive PTB cases (both TB and Drug Resistant TB (DR-TB accessing any public health facilities in study area were prospectively enrolled and tested on Xpert MTB/RIF following a standardized diagnostic algorithm.4,600 pediatric presumptive pulmonary TB cases were enrolled. 590 (12.8%, CI 11.8-13.8 pediatric PTB were diagnosed. Overall 10.4% (CI 9.5-11.2 of presumptive PTB cases had positive results by Xpert MTB/RIF, compared with 4.8% (CI 4.2-5.4 who had smear-positive results. Upfront Xpert MTB/RIF testing of presumptive PTB and presumptive DR-TB cases resulted in diagnosis of 79 and 12 rifampicin resistance cases, respectively. Positive predictive value (PPV for rifampicin resistance detection was high (98%, CI 90.1-99.9, with no statistically significant variation with respect to past history of treatment.Upfront access to Xpert MTB/RIF testing in pediatric presumptive PTB cases was associated with a two-fold increase in bacteriologically-confirmed PTB, and increased detection of rifampicin-resistant TB cases under routine operational conditions across India. These results suggest that routine Xpert MTB/RIF testing is a promising

The challenge of producing skin test antigens with minimal resources suitable for human application against a neglected tropical disease; leprosy.

Directory of Open Access Journals (Sweden)

Becky L Rivoire

Full Text Available True incidence of leprosy and its impact on transmission will not be understood until a tool is available to measure pre-symptomatic infection. Diagnosis of leprosy disease is currently based on clinical symptoms, which on average take 3-10 years to manifest. The fact that incidence, as defined by new case detection, equates with prevalence, i.e., registered cases, suggests that the cycle of transmission has not been fully intercepted by implementation of multiple drug therapy. This is supported by a high incidence of childhood leprosy. Epidemiological screening for pre-symptomatic leprosy in large endemic populations is required to facilitate targeted chemoprophylactic interventions. Such a test must be sensitive, specific, simple to administer, cost-effective, and easy to interpret. The intradermal skin test method that measures cell-mediated immunity was explored as the best option. Prior knowledge on skin testing of healthy subjects and leprosy patients with whole or partially fractionated Mycobacterium leprae bacilli, such as Lepromin or the Rees' or Convit' antigens, has established an acceptable safety and potency profile of these antigens. These data, along with immunoreactivity data, laid the foundation for two new leprosy skin test antigens, MLSA-LAM (M. leprae soluble antigen devoid of mycobacterial lipoglycans, primarily lipoarabinomannan and MLCwA (M. leprae cell wall antigens. In the absence of commercial interest, the challenge was to develop these antigens under current good manufacturing practices in an acceptable local pilot facility and submit an Investigational New Drug to the Food and Drug Administration to allow a first-in-human phase I clinical trial.

The challenge of producing skin test antigens with minimal resources suitable for human application against a neglected tropical disease; leprosy.

Science.gov (United States)

Rivoire, Becky L; TerLouw, Stephen; Groathouse, Nathan A; Brennan, Patrick J

2014-01-01

True incidence of leprosy and its impact on transmission will not be understood until a tool is available to measure pre-symptomatic infection. Diagnosis of leprosy disease is currently based on clinical symptoms, which on average take 3-10 years to manifest. The fact that incidence, as defined by new case detection, equates with prevalence, i.e., registered cases, suggests that the cycle of transmission has not been fully intercepted by implementation of multiple drug therapy. This is supported by a high incidence of childhood leprosy. Epidemiological screening for pre-symptomatic leprosy in large endemic populations is required to facilitate targeted chemoprophylactic interventions. Such a test must be sensitive, specific, simple to administer, cost-effective, and easy to interpret. The intradermal skin test method that measures cell-mediated immunity was explored as the best option. Prior knowledge on skin testing of healthy subjects and leprosy patients with whole or partially fractionated Mycobacterium leprae bacilli, such as Lepromin or the Rees' or Convit' antigens, has established an acceptable safety and potency profile of these antigens. These data, along with immunoreactivity data, laid the foundation for two new leprosy skin test antigens, MLSA-LAM (M. leprae soluble antigen devoid of mycobacterial lipoglycans, primarily lipoarabinomannan) and MLCwA (M. leprae cell wall antigens). In the absence of commercial interest, the challenge was to develop these antigens under current good manufacturing practices in an acceptable local pilot facility and submit an Investigational New Drug to the Food and Drug Administration to allow a first-in-human phase I clinical trial.

Technology Solutions Case Study: Field Testing an Unvented Roof with Fibrous Insulation and Tiles

Energy Technology Data Exchange (ETDEWEB)

None

2015-11-01

This case study by the U.S. Department of Energy’s Building America research team Building Science Corporation is a test implementation of an unvented tile roof assembly in a hot-humid climate (Orlando, Florida; zone 2A), insulated with air-permeable insulation (netted and blown fiberglass).

Two cases of Cokeromyces recurvatus in liquid-based Papanicolaou tests and a review of the literature.

Science.gov (United States)

Odronic, Shelley I; Scheidemantel, Thomas; Tuohy, Marion J; Chute, Deborah; Procop, Gary W; Booth, Christine N

2012-12-01

We present 2 cases of Cokeromyces recurvatus in routine, liquid-based Papanicolaou tests (ThinPrep). Patient 1 is a healthy, asymptomatic, 26-year-old woman with no pertinent past medical history. Patient 2 is a healthy, asymptomatic, 47-year-old woman with no pertinent past medical history. The Papanicolaou tests from both patients showed many fungal-like elements as globose, yeastlike forms measuring 10 to 30 µm in diameter with multiple, narrowly attached apparent "daughter" buds. This morphology was consistent with Paracoccidioides brasiliensis. However, broad-range fungal polymerase chain reaction and deoxyribonucleic acid sequence analysis performed with GenBank Basic Local Alignment Search Tool showed an exact match for C recurvatus. Our cases highlight the importance of molecular techniques to prevent misdiagnosis of C recurvatus as P brasiliensis, based on morphology alone. There have been 8 previously published cases of C recurvatus infection in humans, 3 of which were reported in the female genital tract.

LCT-coil design: Mechanical interaction between composite winding and steel casing under various test conditions

International Nuclear Information System (INIS)

Dolensky, B.; Messemer, G.; Zehlein, H.; Erb, J.

1981-01-01

Finite element computations for the structural design of the large superconducting toroidal field coil contributed by EURATOM to the Large Coil Test Facility (LCTF) at ORNL, USA were performed at KfK, using the ASKA code. The layout of the coil must consider different types of requirements: firstly, an optimal D-shaped contour minimizing circumferential stress gradients under normal operation in the toroidal arrangement must be defined. Secondly, the three-dimensional real design effects due to the actual support conditions, manufacturing tolerances etc. must be mastered for different basic operational and failure load cases. And, thirdly, the design must stand a single coil qualification test in the TOSKA-facility at KfK, Karlsruhe, FRG, before it is plugged into the LCTF. The emphasis of the paper is three-pronged according to these requirements: i) the 3D magnetic body forces as well as the underlying magnetic fields as computed by the HEDO-code are described. ii) The mechanical interaction between casing and winding as given elsewhere in terms of high stress regions, gaps, slide movements and contact forces for various load cases representing the LCTF test conditions is illustrated here by a juxtaposition of the operational deformations and stresses within the LCTF and the TOSKA. iii) Particular effects like the restraint imposed by a corset-type reinforcement of the coil in the TOSKA test facility to limit the breathing deformation are parametrically studied. Moreover, the possibilities to derive scaling laws which make essential results transferable to larger coils by extracting a 1D mechanical response from the 3D finite element model is also demonstrated. (orig./GG)

Mineralogic and petrologic investigation of post-test core samples from the Spent Fuel Test - Climax

International Nuclear Information System (INIS)

Ryerson, F.J.; Beiriger, J.

1985-02-01

We have characterized a suite of samples taken subsequent to the end of the Spent Fuel Test - Climax by petrographic and microanalytical techniques and determined their mineral assemblage, modal properties, and mineral chemistry. The samples were obtained immediately adjacent to the canister borehole at a variety of depths and positions within the canister drift, as well as radially outward from each canister hole. This method of sampling allows variations in post-test mineralogic properties to be evaluated on the basis of (1) depth along a particular canister hole and (2) position within the canister drift, with respect to the heat and radiation sources, and with respect to the pre - test samples. In no case did we find any significant correlation between the mineralogical properties and variables listed above. In short, the Spent Fuel Test - Climax has produced no identifiable mineralogical response in the Climax quartz monzonite. 12 refs., 11 figs., 5 tabs

Acceptance Testing Of Web Applications With Test Description Language

Directory of Open Access Journals (Sweden)

Łukasz Olek

2014-01-01

Full Text Available Acceptance tests are usually created by a client after a part of a system is implemented. However, some methodologies propose the elaboration of test cases before implementing a system. This approach increases the probability of system implementation that fulfills requirements, but may be problematic for customers and testers. To allow acceptance testing in such conditions, we propose to define test cases by recording them on an interactive mockup (a low detailed user-interface prototype. The paper focuses on Test Description Language, a notation used to store test cases.

Sensitivity analysis for near-surface disposal in argillaceous media using NAMMU-HYROCOIN Level 3-Test case 1

International Nuclear Information System (INIS)

Miller, D.R.; Paige, R.W.

1988-07-01

HYDROCOIN is an international project for comparing groundwater flow models and modelling strategies. Level 3 of the project concerns the application of groundwater flow models to repository performance assessment with emphasis on the treatment of sensitivity and uncertainty in models and data. Level 3, test case 1 concerns sensitivity analysis of the groundwater flow around a radioactive waste repository situated in a near surface argillaceous formation. Work on this test case has been carried out by Harwell and will be reported in full in the near future. This report presents the results obtained using the computer program NAMMU. (author)

Micro-fractures produced in the Cadalso de los Vidrios granite (Madrid) subjected to Freeze-Thaw Durability Testing

Science.gov (United States)

Freire-Lista, D. M.; Varas-Muriel, M. J.; Fort, R.

2012-04-01

A specific leucogranite (fine to medium grain sized) from Cadalso de los Vidrios, Madrid, Spain, from where it takes the name of the stone variety, which is a traditional heritage building material used in Central Spain, was subjected to freezing-thaw durability tests or accelerated artificial ageing tests (according to Spanish standard EN 12371:2001) to assess its durability by means of ultrasonic velocity measurements (a non-destructive technique), and optical and fluorescence petrography using a polarized optical microscope (destructive technique), both techniques used before, during and after laboratory ageing tests, or in other words, what is determined is the improvement or deterioration in some properties. The measurement of the ultrasonic velocity in the leucogranite cubic test specimens along the freezing-thaw cycles shown that the velocity diminishes with the number of cycles, in relation to the decay that the stones were experiencing. This deterioration can be observed by the loss of crystalline minerals in the surface of the analyzed samples and by the micro-fractures appearance up to one centimeter deep, which have been detected by the petrographic techniques previously mentioned. The images taken by means of the fluorescence microscope clearly show the micro-fractures generated during the durability test. These images have been processed and analyzed by the UTHSCSA Image Tool program with the purpose of being able to quantify the degree of decay that this type of crystalline materials undergone, when subjected to a number of freezing-thaw test cycles. It is therefore an effective, reliable and complementary technique to that of the petrography analysis, both optical and fluorescence ones. In the first cycles of the ageing test, the micro-fractures propagate along crystals edges and during the last cycles of the test, intracrystalline micro-fractures are generated, which are developed in different ways depending on the mineralogy of the crystals. Thus

Corona-producing ice clouds: A case study of a cold mid-latitude cirrus layer

International Nuclear Information System (INIS)

Sassen, K.; Mace, G.G.; Hallett, J.; Poellot, M.R.

1998-01-01

A high (14.0-km), cold (-71.0thinsp degree C) cirrus cloud was studied by ground-based polarization lidar and millimeter radar and aircraft probes on the night of 19 April 1994 from the Cloud and Radiation Testbed site in northern Oklahoma. A rare cirrus cloud lunar corona was generated by this 1 - 2-km-deep cloud, thus providing an opportunity to measure the composition in situ, which had previously been assumed only on the basis of lidar depolarization data and simple diffraction theory for spheres. In this case, corona ring analysis indicated an effective particle diameter of ∼22 μm. A variety of in situ data corroborates the approximate ice-particle size derived from the passive retrieval method, especially near the cloud top, where impacted cloud samples show simple solid crystals. The homogeneous freezing of sulfuric acid droplets of stratospheric origin is assumed to be the dominant ice-particle nucleation mode acting in corona-producing cirrus clouds. It is speculated that this process results in a previously unrecognized mode of acid-contaminated ice-particle growth and that such small-particle cold cirrus clouds are potentially a radiatively distinct type of cloud. copyright 1998 Optical Society of America

Taxonomy Meets Public Health: The Case of Shiga Toxin-Producing Escherichia coli.

Science.gov (United States)

Scheutz, Flemming

2014-06-01

To help assess the clinical and public health risks associated with different Shiga toxin-producing Escherichia coli (STEC) strains, an empirical classification scheme was used to classify STEC into five "seropathotypes" (seropathotype A [high risk] to seropathotypes D and E [minimal risk]). This definition is of considerable value in cases of human infection but is also problematic because not all STEC infections are fully characterized and coupled to reliable clinical information. Outbreaks with emerging hybrid strains continuously challenge our understanding of virulence potential and may result in incorrect classification of specific pathotypes; an example is the hybrid strain that caused the 2011 outbreak in Germany, STEC/EAggEC O104:H4, which may deserve an alternative seropathotype designation. The integration of mobile virulence factors in the stepwise and parallel evolution of pathogenic lineages of STEC collides with the requirements of a good taxonomy, which separates elements of each group into subgroups that are mutually exclusive, unambiguous, and, together, include all possibilities. The concept of (sero)-pathotypes is therefore challenged, and the need to identify factors of STEC that absolutely predict the potential to cause human disease is obvious. Because the definition of hemolytic-uremic syndrome (HUS) is distinct, a basic and primary definition of HUS-associated E. coli (HUSEC) for first-line public health action is proposed: stx2 in a background of an eae- or aggR-positive E. coli followed by a second-line subtyping of stx genes that refines the definition of HUSEC to include only stx2a and stx2d. All other STEC strains are considered "low-risk" STEC.

Partnership in Knowledge Creation: Lessons Learned from a Researcher-Policy Actor Partnership to Co-Produce a Rapid Appraisal Case Study of South Australia's Social Inclusion Initiative

Science.gov (United States)

Newman, Lareen; Biedrzycki, Kate; Patterson, Jan; Baum, Fran

2011-01-01

This paper describes a partnership between researchers and policy actors that was developed within a short timeframe to produce a rapid appraisal case study of a government policy initiative--South Australia's "Social Inclusion Initiative"--for the Social Exclusion Knowledge Network of the international Commission on Social Determinants…

Cooperative test plots produce some promising Chinese and hybrid chestnut trees

Science.gov (United States)

Jesse D. Diller; Russell B. Clapper; Richard A. Jaynes

1964-01-01

In attempts to find a chestnut tree that is resistant to the blight fungus Endothia parasitica, Asiatic chestnuts have been imported and grown in this country, and tree breeders have worked to produce hybrid trees that might be suitable substitutes for the blight-susceptible American chestnut, Castanea dentate, in timber and nut...

Reliability of case definitions for public health surveillance assessed by Round-Robin test methodology

Directory of Open Access Journals (Sweden)

Claus Hermann

2006-05-01

Full Text Available Abstract Background Case definitions have been recognized to be important elements of public health surveillance systems. They are to assure comparability and consistency of surveillance data and have crucial impact on the sensitivity and the positive predictive value of a surveillance system. The reliability of case definitions has rarely been investigated systematically. Methods We conducted a Round-Robin test by asking all 425 local health departments (LHD and the 16 state health departments (SHD in Germany to classify a selection of 68 case examples using case definitions. By multivariate analysis we investigated factors linked to classification agreement with a gold standard, which was defined by an expert panel. Results A total of 7870 classifications were done by 396 LHD (93% and all SHD. Reporting sensitivity was 90.0%, positive predictive value 76.6%. Polio case examples had the lowest reporting precision, salmonellosis case examples the highest (OR = 0.008; CI: 0.005–0.013. Case definitions with a check-list format of clinical criteria resulted in higher reporting precision than case definitions with a narrative description (OR = 3.08; CI: 2.47–3.83. Reporting precision was higher among SHD compared to LHD (OR = 1.52; CI: 1.14–2.02. Conclusion Our findings led to a systematic revision of the German case definitions and build the basis for general recommendations for the creation of case definitions. These include, among others, that testable yes/no criteria in a check-list format is likely to improve reliability, and that software used for data transmission should be designed in strict accordance with the case definitions. The findings of this study are largely applicable to case definitions in many other countries or international networks as they share the same structural and editorial characteristics of the case definitions evaluated in this study before their revision.

Tests of selection in pooled case-control data: an empirical study.

Science.gov (United States)

Udpa, Nitin; Zhou, Dan; Haddad, Gabriel G; Bafna, Vineet

2011-01-01

For smaller organisms with faster breeding cycles, artificial selection can be used to create sub-populations with different phenotypic traits. Genetic tests can be employed to identify the causal markers for the phenotypes, as a precursor to engineering strains with a combination of traits. Traditional approaches involve analyzing crosses of inbred strains to test for co-segregation with genetic markers. Here we take advantage of cheaper next generation sequencing techniques to identify genetic signatures of adaptation to the selection constraints. Obtaining individual sequencing data is often unrealistic due to cost and sample issues, so we focus on pooled genomic data. We explore a series of statistical tests for selection using pooled case (under selection) and control populations. The tests generally capture skews in the scaled frequency spectrum of alleles in a region, which are indicative of a selective sweep. Extensive simulations are used to show that these approaches work well for a wide range of population divergence times and strong selective pressures. Control vs control simulations are used to determine an empirical False Positive Rate, and regions under selection are determined using a 1% FPR level. We show that pooling does not have a significant impact on statistical power. The tests are also robust to reasonable variations in several different parameters, including window size, base-calling error rate, and sequencing coverage. We then demonstrate the viability (and the challenges) of one of these methods in two independent Drosophila populations (Drosophila melanogaster) bred under selection for hypoxia and accelerated development, respectively. Testing for extreme hypoxia tolerance showed clear signals of selection, pointing to loci that are important for hypoxia adaptation. Overall, we outline a strategy for finding regions under selection using pooled sequences, then devise optimal tests for that strategy. The approaches show promise for

Awareness and uptake of direct-to-consumer genetic testing among cancer cases, their relatives, and controls: the Northwest Cancer Genetics Network.

Science.gov (United States)

Hall, Taryn O; Renz, Anne D; Snapinn, Katherine W; Bowen, Deborah J; Edwards, Karen L

2012-07-01

To determine if awareness of, interest in, and use of direct-to-consumer (DTC) genetic testing is greater in a sample of high-risk individuals (cancer cases and their relatives), compared to controls. Participants were recruited from the Northwest Cancer Genetics Network. A follow-up survey was mailed to participants to assess DTC genetic testing awareness, interest, and use. One thousand two hundred sixty-seven participants responded to the survey. Forty-nine percent of respondents were aware of DTC genetic testing. Of those aware, 19% indicated interest in obtaining and testing. Additional information supplied by respondents who reported use of DTC genetic tests indicated that 55% of these respondents likely engaged in clinical genetic testing, rather than DTC genetic testing. Awareness of DTC genetic testing was greater in our sample of high-risk individuals than in controls and population-based studies. Although interest in and use of these tests among cases in our sample were equivalent to other population-based studies, interest in testing was higher among relatives and people who self-referred for a registry focused on cancer than among cases and controls. Additionally, our results suggest that there may be some confusion about what constitutes DTC genetic testing.

Tests of Selection in Pooled Case-Control Data: An Empirical Study

Directory of Open Access Journals (Sweden)

Nitin eUdpa

2011-11-01

Full Text Available For smaller organisms with faster breeding cycles, artificial selection can be used to create sub-populations with different phenotypic traits. Genetic tests can be employed to identify the causal markers for the phenotypes, as a precursor to engineering strains with a combination of traits. Traditional approaches involve analyzing crosses of inbred strains to test for co-segregation with genetic markers. Here we take advantage of cheaper next generation sequencing techniques to identifygenetic signatures of adaptation to the selection constraints. Obtaining individual sequencing data is often unrealistic due to cost and sample issues, so we focus on pooled genomic data.In this paper, we explore a series of statistical tests for selection using pooled case (under selection and control populations. Extensive simulations are used to show that these approaches work well for a wide range of population divergence times and strong selective pressures. We show that pooling does not have a significant impact on statistical power. The tests are also robust to reasonable variations in several different parameters, including window size, base-calling error rate, and sequencing coverage. We then demonstrate the viability (and the challenges of one of these methods in two independent Drosophila populations (Drosophila melanogaster bred under selectionfor hypoxia and accelerated development, respectively. Testing for extreme hypoxia tolerance showed clear signals of selection, pointing to loci that are important for hypoxia adaptation.Overall, we outline a strategy for finding regions under selection using pooled sequences, then devise optimal tests for that strategy. The approaches show promise for detecting selection, even several generations after fixation of the beneficial allele has occurred.

The comparative performance of PMI estimation in skeletal remains by three methods (C-14, luminol test and OHI): analysis of 20 cases.

Science.gov (United States)

Cappella, Annalisa; Gibelli, Daniele; Muccino, Enrico; Scarpulla, Valentina; Cerutti, Elisa; Caruso, Valentina; Sguazza, Emanuela; Mazzarelli, Debora; Cattaneo, Cristina

2015-01-27

When estimating post-mortem interval (PMI) in forensic anthropology, the only method able to give an unambiguous result is the analysis of C-14, although the procedure is expensive. Other methods, such as luminol tests and histological analysis, can be performed as preliminary investigations and may allow the operators to gain a preliminary indication concerning PMI, but they lack scientific verification, although luminol testing has been somewhat more accredited in the past few years. Such methods in fact may provide some help as they are inexpensive and can give a fast response, especially in the phase of preliminary investigations. In this study, 20 court cases of human skeletonized remains were dated by the C-14 method. For two cases, results were chronologically set after the 1950s; for one case, the analysis was not possible technically. The remaining 17 cases showed an archaeological or historical collocation. The same bone samples were also screened with histological examination and with the luminol test. Results showed that only four cases gave a positivity to luminol and a high Oxford Histology Index (OHI) score at the same time: among these, two cases were dated as recent by the radiocarbon analysis. Thus, only two false-positive results were given by the combination of these methods and no false negatives. Thus, the combination of two qualitative methods (luminol test and microscopic analysis) may represent a promising solution to cases where many fragments need to be quickly tested.

Testing the Market Model – A Case Study of Fondul Proprietatea (FP)

OpenAIRE

Sorin Claudiu Radu

2014-01-01

The financial theory related to the bond portfolio analysis was coined by Harry Markowitz, an authentic’ pioneer of the modern bond theory’, and his well-thought interpretation of the bond selection model may be found in his research papers “Portfolio Selection” (Markowitz M. Harry, 1952) and “Portfolio Selection: Efficient Diversification of Investments” (Markowitz M. Harry 1960). This paper is proposed to test the market model in the Romanian stock market, case of Property Fund.

Método para generar casos de prueba funcional en el desarrollo de software Generating functional testing case method in software development

Directory of Open Access Journals (Sweden)

Liliana González Palacio

2009-07-01

Full Text Available Un aspecto crucial en el control de calidad del desarrollo de software son las pruebas y, dentro de estas, las pruebas funcionales, en las cuales se hace una verificación dinámica del comportamiento de un sistema, basada en la observación de un conjunto seleccionado de ejecuciones controladas o casos de prueba. Para hacer pruebas funcionales se requiere una planificación que consiste en definir los aspectos a chequear y la forma de verificar su correcto funcionamiento, punto en el cual adquieren sentido los casos de prueba. En este artículo derivado de investigación se define un método para generar casos de prueba funcional a partir de casos de uso del sistema, como producto intermedio del proyecto cofinanciado titulado "Herramienta para la documentación de pruebas funcionales"Testing is a main aspect in quality control of software development, especially functional tests. The aim of functional testing is to dynamically verify the system behavior, based on the observation of a given set of controlled executions or test cases. Planning is required to make functional tests, defining the aspects to be checked and the way to verify its proper operation; this allows test cases make sense. In this paper (research based, we propose a method to generate functional test cases from system use cases, based on the co-financed project "Tool for Documenting Functional Testing."

Does Refactoring of Test Smells Induce Fixing Flaky Tests?

NARCIS (Netherlands)

Palomba, F.; Zaidman, A.E.

2017-01-01

Regression testing is a core activity that allows developers to ensure that source code changes do not introduce bugs. An important prerequisite then is that test cases are deterministic. However, this is not always the case as some tests suffer from socalled flakiness. Flaky tests have serious

Proportion hyperglycosylated hCG: a new test for discriminating gestational trophoblastic diseases.

Science.gov (United States)

Cole, Laurence A

2014-11-01

Hyperglycosylated human chorionic gonadotropin (hCG) is a variant of hCG with large oligosaccharide side chains. Although hCG is produced by syncytiotrophoblast cells, hyperglycosylated hCG marks cytotrophoblast cell. Hyperglycosylated hCG signals placental implantation. Total hCG in serum and urine is measured by the Siemens Immulite hCG pregnancy test; the result is in milli-international unit per milliliter. Hyperglycosylated hCG is determined by the B152 microtiter plate assay; the result is in nanogram per milliliter. Hyperglycosylated hCG results can be converted to milli-international unit per milliliter equivalents by multiplying by 11. The test measures proportion hyperglycosylated hCG, hyperglycosylated hCG / total hCG. Proportion hyperglycosylated hCG marks cases intent on developing persistent hydatidiform mole (68% detection at 17% false detection). Proportion hyperglycosylated hCG also marks persistent hydatidiform mole (100% detection at 5.1% false detection). Proportion hyperglycosylated hCG distinguishes choriocarcinoma and gestational trophoblastic neoplasm cases, absolutely discriminating aggressive cases and minimally aggressive cases. Proportion hyperglycosylated hCG identifies quiescent gestational trophoblastic disease cases. It recognizes quiescent cases that become persistent disease (100% detection at 0% false positive). Proportion hyperglycosylated hCG is an invaluable test for discriminating gestational trophoblastic diseases.

Is South Korea a Case of High-Stakes Testing Gone Too Far? Information Capsule. Volume 1107

Science.gov (United States)

Blazer, Christie

2012-01-01

South Korea's students consistently outperform their counterparts in almost every country in reading and math. Experts have concluded, however, that the South Korean education system has produced students who score well on tests, but fall short on creativity and innovative thinking. They blame these shortcomings on schools' emphasis on rote…

Males that drop a sexually selected weapon grow larger testes.

Science.gov (United States)

Joseph, Paul N; Emberts, Zachary; Sasson, Daniel A; Miller, Christine W

2018-01-01

Costly sexually selected weapons are predicted to trade off with postcopulatory traits, such as testes. Although weapons can be important for achieving access to females, individuals of some species can permanently drop (i.e. autotomize) their weapons, without regeneration, to escape danger. We capitalized on this natural behavior to experimentally address whether the loss of a sexually selected weapon leads to increased testes investment in the leaf-footed cactus bug, Narnia femorata Stål (Hemiptera: Coreidae). In a second experiment, we measured offspring production for males that lost a weapon during development. As predicted, males that dropped a hind limb during development grew significantly larger testes than the control treatments. Hind-limb autotomy did not result in the enlargement of other nearby traits. Our results are the first to experimentally demonstrate that males compensate for natural weapon loss by investing more in testes. In a second experiment we found that females paired with males that lost a hind limb had 40% lower egg hatching success than females paired with intact males, perhaps because of lower mating receptivity to males with a lost limb. Importantly, in those cases where viable offspring were produced, males missing a hind limb produced 42% more offspring than males with intact limbs. These results suggest that the loss of a hind-limb weapon can, in some cases, lead to greater fertilization success. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

Unit and integration testing of Lustre programs: a case study from the nuclear industry

International Nuclear Information System (INIS)

Thevenod-Fosse, P.

1998-01-01

LUSTRE belongs to the class of synchronous data flow languages which have been designed for programming reactive and real-time systems having safety-critical requirements. It is implemented in the SCADE tool. SCADE is a software development environment for real-time systems which consists of a graphical and textual editor, and a C code generator. In previous work, a testing approach specific to LUSTRE programs has been defined, which may be applied at either the unit or integration testing levels of a gradual testing process. The paper reports on an industrial case study we have performed to exemplify the feasibility of the testing strategy. The software module, called SRIC (Source Range Instrumentation channel), was developed by SCHNEIDER ELECTRIC in the SCADE environment. SRIC is extracted from a monitoring software system of a nuclear reactor: it approximates 2600 lines of C code automatically generated by SCADE. Section 2 outlines the testing strategy. Then, Section 3 presents the results related to the program SRIC, for which four testing levels were defined (unit testing followed by three successive integration testing levels). First conclusions and direction for future work are proposed in Section 4. (author)

Producer gas fuelling of a 20kW output engine by gasification of solid biomass

Energy Technology Data Exchange (ETDEWEB)

Hollingdale, A C; Breag, G R; Pearce, D

1988-11-01

Motive power requirements in the range up to 100 kW shaft power are common in developing country processing operations. Producer gas-fuelled systems based upon a relatively cheap and simple manually operated gasifier or reactor using readily available biomass feedstock can offer in some cases an attractive alternative to fossil-fuelled power units. This bulletin outlines research and development work by the Industrial Development Department of the Overseas Development Natural Resources Institute for 20 kW shaft power output from producer gas derived from solid biomass. Biomass materials such as wood or shells can be carbonized to form charcoal or left in the natural uncarbonized state. In this work both carbonized and uncarbonized biomass fuel has been used to provide producer gas to fuel a Ford 2274E engine, an industrial version of a standard vehicle spark-ignition engine. Cross-draught and down-draught reactor designs were evaluated during trials with this engine. Also different gas cleaning and cooling arrangements were tested. Particular emphasis was placed on practical aspects of reactor/engine operation. This work follows earlier work with a 4 kW shaft power output system using charcoal-derived producer gas. (author).

Case Report: Nodule Development From Subcapsular Aldosterone-Producing Cell Clusters Causes Hyperaldosteronism.

Science.gov (United States)

Nishimoto, Koshiro; Seki, Tsugio; Kurihara, Isao; Yokota, Kenichi; Omura, Masao; Nishikawa, Tetsuo; Shibata, Hirotaka; Kosaka, Takeo; Oya, Mototsugu; Suematsu, Makoto; Mukai, Kuniaki

2016-01-01

We previously reported that the human adrenal cortex remodels to form subcapsular aldosterone-producing cell clusters (APCCs). Some APCCs were recently found to carry aldosterone-producing adenoma (APA)-associated somatic mutations in ion channel/pump genes, which implied that APCCs produce aldosterone autonomously and are an origin of APA. However, there has been no report describing an APCC-to-APA transitional lesion. A histological examination revealed unilateral multiple adrenocortical micronodules in the adrenals of two patients with primary aldosteronism (PA). Based on immunohistochemistry for aldosterone synthase, some of the micronodules were identified as possible APCC-to-APA transitional lesions (pAATLs; a tentative term used in this manuscript), which consisted of a subcapsular APCC-like portion and an inner micro-APA-like (mAPA-like) portion without an apparent histological border. Genomic DNA samples prepared from pAATL histological sections were analyzed by next-generation sequencing for the known APA-associated mutations. The mAPA-like portions from two of the three large pAATLs examined harbored mutations (KCNJ5 [p.G151R] in pAATL 3 and ATP1A1 [p.L337M] in pAATL 7), whereas their corresponding APCC-like portions did not, suggesting their role in the formation of mAPA. Another lesion carried novel mutations in ATP1A1 (p.Ile322_Ile325del and p.Ile327Ser) in both the mAPA-like and APCC-like portions, thereby supporting these portions having a clonal origin. A novel aldosterone-producing pathology, pAATL that causes unilateral PA, was detected in the adrenals of two patients. Next-generation sequencing analyses of the large pAATLs suggested that the introduction of APA-associated mutations in the ion channel/pump genes may be involved in the development of mAPA from existing APCCs.

Evaluation of gaseous emissions produced in the tests on the demonstration plant for sludge drying and incineration

International Nuclear Information System (INIS)

Lotito, V.; Spinosa, L.; Antonacci, R.; Mininni, G.

2001-01-01

Incineration is a valid alternative to other more diffused disposal systems (agricultural use, landfill), when they cannot be applied due to high pollutants concentrations or other unforeseeable constraints. However, it can cause severe air pollution by inorganic (heavy metals) and organic (PAHs, PCDDs, PCDFs) pollutants, particulate, NO x , CO and acidic compounds; this fact has raised public concern about incineration and has hindered a wider application of this practice. Water Research Institute of Italian National Research Council realised a demonstration plant mainly consisting of a fluidized bed furnace, a rotary kiln furnace, a dryer with heat recovery section, particulate and acidic compounds removal apparatuses, and set up a research programme to demonstrate that incineration is a safe operation and can comply the relevant legislation, as far as organic and inorganic micropollutants are concerned. A total of 40 tests were carried out (30 with the fluidized bed furnace and 10 with rotary kiln one) treating dewatered sludges (in many cases with the addition of high chlorinated compounds and Cu salts) or dried ones, under different operating conditions (furnace temperature, after-burner temperature, chlorine concentration). Particulate concentrations, and consequently heavy metals concentrations, at the stack resulted in any case under legal limits. As far as conventional pollutants are concerned, only HCl and CO overcame sometimes standards, mainly due to temporary operating up-sets. PAHs concentration resulted quite constant, thus demonstrating that tests were operated in steady-state and satisfactory conditions. Also dioxins and furans overcame sometimes standards, but no correlation was found with more severe tests conditions; it happened when plant up-set conditions occurred. Operation resulted quite satisfactory, but dryer operation required constant operators attention. In rotary kiln furnace a build up of solidified ashes occurred in counter

Genome Annotation and Transcriptomics of Oil-Producing Algae

Science.gov (United States)

2015-03-16

AFRL-OSR-VA-TR-2015-0103 GENOME ANNOTATION AND TRANSCRIPTOMICS OF OIL-PRODUCING ALGAE Sabeeha Merchant UNIVERSITY OF CALIFORNIA LOS ANGELES Final...2010 To 12-31-2014 4. TITLE AND SUBTITLE GENOME ANNOTATION AND TRANSCRIPTOMICS OF OIL-PRODUCING ALGAE 5a. CONTRACT NUMBER FA9550-10-1-0095 5b...NOTES 14. ABSTRACT Most algae accumulate triacylglycerols (TAGs) when they are starved for essential nutrients like N, S, P (or Si in the case of some

Magnetic fields produced by rotating symmetrical bodies with homogeneous surface charge density

International Nuclear Information System (INIS)

Espejel-Morales, R; Murguía-Romero, G; Calles, A; Cabrera-Bravo, E; Morán-López, J L

2016-01-01

We present a numerical calculation for the stationary magnetic field produced by different rotating bodies with homogeneous and constant surface charge density. The calculation is done by superposing the magnetic field produced by a set of loops of current which mimic the magnetic field produced by belts of current defined by slices of fixed width. We consider the cases of a sphere, ellipsoids, open and closed cylinders and a combination of these in a dumbbell -like shell. We also plot their magnetic field lines using a technique that make use of the Runge–Kutta fourth-order method. Up to our knowledge, the case of closed cylinders was not calculated before. In contrast to previous results, we find that the magnetic field inside finite hollow bodies is homogeneous only in the case of a sphere. This is consequence of the fact that, for the sphere, the surface of any slice taken perpendicularly to the rotation axis, depends only on its thickness, like in the case of an infinite cylinder. (paper)

Maintenance of safety behaviors via response-produced stimuli.

Science.gov (United States)

Angelakis, Ioannis; Austin, Jennifer L

2015-11-01

Animal studies suggest that safety behaviors may be maintained by internally or externally produced safety signals, which function as positive reinforcers. We designed two experiments to test this phenomenon with humans. Participants played a computerized game in which they could earn or lose treasures by clicking on a map. In baseline, losses could be postponed by pressing a pedal that also produced a blue bar at the bottom of the screen. During test conditions, no losses were programmed, and pedal presses turned the bar from yellow to blue (Test 1) or blue to yellow (Test 2). In Experiment 2, new participants were exposed to the same conditions but were given information about the safety of the test environment. In both experiments, participants engaged in high rates of pedal pressing when presses were followed by blue bars, suggesting the bar functioned as a safety signal. We discuss how these findings may relate to safety behaviors commonly observed in certain mental health disorders. © The Author(s) 2015.

OPTIMIZATION OF PRODUCED WATER TREATMENT PROCESS - A CASE STUDY FOR DISPOSAL IN THE NIGER DELTA

Directory of Open Access Journals (Sweden)

BONIFACE A. ORIJI

2017-12-01

Full Text Available Produced water is the interstitial reservoir water that flows to the surface with the crude oil into the production separators. This study addressed the effects of some chemicals on produced water and the challenges of finding the optimal concentrations of these chemicals for treating produced water. In this study, produced water treatment was carried out in an oil production platform located in the Niger Delta so as to determine the effect of a particular scale inhibitor, biocide, demulsifier and water clarifier, also to obtain the optimum concentrations of these chemicals in the treatment of produced water. The physico-chemical properties and microbial content of the produced water were determined. The results showed that the conductivity, hardness, pH and alkalinity reduced with increasing concentration of the scale inhibitor. The total heterotrophic bacteria count (THBC, heterotrophic fungi count (THFC and the Sulphate reducing bacteria count (SRBC were found to reduce with increasing concentration of biocide and exposure time. The increase in biocide concentration from 64 PPM to 100 PPM resulted in the reduction of THBC by 99.78%, THFC by 81.32% and SRBC 99.85%. The water clarifier gave the optimum concentration for oil and grease in the produced water at 7.3 PPM.

Acuity and case management: a healthy dose of outcomes, part II.

Science.gov (United States)

Craig, Kathy; Huber, Diane L

2007-01-01

This is the second of a 3-part series presenting 2 effective applications-acuity and dosage-that describe how the business case for case management (CM) can be made. In Part I, dosage and acuity concepts were explained as client need-severity, CM intervention-intensity, and CM activity-dose prescribed by amount, frequency, duration, and breadth of activities. Part I also featured a specific exemplar, the CM Acuity Tool, and described how to use acuity to identify and score the complexity of a CM case. Appropriate dosage prescription of CM activity was discussed. Part II further explains dosage and presents two acuity instruments, the Acuity Tool and AccuDiff. Details are provided that show how these applications produce opportunities for better communication about CM cases and for more accurate measurement of the right content that genuinely reflects the essentials of CM practice. The information contained in the 3-part series applies to all CM practice settings and contains ideas and recommendations useful to CM generalists, specialists, and supervisors, plus business and outcomes managers. The Acuity Tools Project was developed from frontline CM practice in one large, national telephonic CM company. Dosage: A literature search failed to find research into dosage of a behavioral intervention. The Huber-Hall model was developed and tested in a longitudinal study of CM models in substance abuse treatment and reported in the literature. Acuity: A structured literature search and needs assessment launched the development of the suite of acuity tools. A gap analysis identified that an instrument to assign and measure case acuity specific to CM activities was needed. Clinical experts, quality specialists, and business analysts (n = 7) monitored the development and testing of the tools, acuity concepts, scores, differentials, and their operating principles and evaluated the validity of the Acuity Tools' content related to CM activities. During the pilot phase of

Practicing the Test Produces Strength Equivalent to Higher Volume Training.

Science.gov (United States)

Mattocks, Kevin T; Buckner, Samuel L; Jessee, Matthew B; Dankel, Scott J; Mouser, J Grant; Loenneke, Jeremy P

2017-09-01

To determine if muscle growth is important for increasing muscle strength or if changes in strength can be entirely explained from practicing the strength test. Thirty-eight untrained individuals performed knee extension and chest press exercise for 8 wk. Individuals were randomly assigned to either a high-volume training group (HYPER) or a group just performing the one repetition maximum (1RM) strength test (TEST). The HYPER group performed four sets to volitional failure (~8RM-12RM), whereas the TEST group performed up to five attempts to lift as much weight as possible one time each visit. Data are presented as mean (90% confidence interval). The change in muscle size was greater in the HYPER group for both the upper and lower bodies at most but not all sites. The change in 1RM strength for both the upper body (difference of -1.1 [-4.8, 2.4] kg) and lower body (difference of 1.0 [-0.7, 2.8] kg for dominant leg) was not different between groups (similar for nondominant). Changes in isometric and isokinetic torque were not different between groups. The HYPER group observed a greater change in muscular endurance (difference of 2 [1,4] repetitions) only in the dominant leg. There were no differences in the change between groups in upper body endurance. There were between-group differences for exercise volume (mean [95% confidence interval]) of the dominant (difference of 11,049.3 [9254.6-12,844.0] kg) leg (similar for nondominant) and chest press with the HYPER group completing significantly more total volume (difference of 13259.9 [9632.0-16,887.8] kg). These findings suggest that neither exercise volume nor the change in muscle size from training contributed to greater strength gains compared with just practicing the test.

Can neuropsychological testing produce unequivocal evidence of brain damage? II. Testing for right vs. left differences.

Science.gov (United States)

Reitan, Ralph M; Wolfson, Deborah

2008-01-01

Sensation and perception, as well as motor functions, have played an important role in the history of psychology. Although tests of these abilities are sometimes included in neuropsychological assessments, comparisons of intraindividual performances on the two sides of the body (as a basis for drawing conclusions and comparisons about the functional status of the two cerebral hemispheres) are in many instances neglected or considered only casually. This study, utilizing several motor and sensory-perceptual tests, compared intraindividual differences on the two sides of the body in a group of controls and a group of persons with brain damage. The results indicated that the sensory-perceptual tests were particularly effective in differentiating the groups. More than 60% of the group with brain damage had greater differences on the two sides of the body than did any of the controls. These findings suggest that a substantial proportion of persons with cerebral disease or damage may be subject to unequivocal identification using sensory-perceptual tests that take only about 20 minutes to administer. These tests may serve a valuable role as an adjunct to comprehensive neuropsychological evaluation and should be further evaluated in this respect.

Eficiência dos testes cromáticos de comparação na discromatopsia hereditária: relato de casos Efficiency of color vision tests in hereditary dyschromatopsia: case report

Directory of Open Access Journals (Sweden)

Luciene Chaves Fernandes

2008-08-01

Full Text Available As autoras relatam dois casos de discromatopsia hereditária e discutem a eficiência dos testes cromáticos no diagnóstico de uma discromatopsia. Os pacientes foram reprovados em diferentes concursos públicos federais por apresentarem diagnóstico de discromatopsia hereditária pelo teste de Ishihara. Submeteram-se a exame oftalmológico, com resultados dentro da normalidade. Procuraram novo parecer para melhor caracterização da sua discromatopsia. Não havia sintomas relacionados à deficiência. Os testes Panel D15 simples, D28 de Roth mostraram-se normais e o D15 dessaturado confirmou deutanomalia no caso 1. No segundo caso os testes de comparação mostraram alterações sem significado cromático. O diagnóstico de uma discromatopsia é muito complexo. As autoras destacam a importância de realização de testes de visão cromática complementares ao teste de Ishihara para diagnóstico de uma discromatopsia.The authors describe two cases of hereditary dyschromatopsia and discuss the efficiency of the color vision tests. The patients were disapproved in different federal public examinations because Ishihara's test diagnosed hereditary dyschromatopsia. Ophthalmological evaluation was normal. No symptoms related to dyschromatopsia were presented. Panels D15 and Roth D 28 were normal. Desaturated D 15 showed deuteranomaly in case one. In the second case the comparative color vision tests showed nonspecific disorder. The diagnosis of dyschromatopsia is complex. The authors recommend comparative color vision tests to complement the Ishihara test for a better understanding of the color deficiency.

Characterization of test specimens produced in reduced size for X-ray microtomography (µ-CT tests

Directory of Open Access Journals (Sweden)

E. E. BERNARDES

Full Text Available Abstract The need to use reduced sample sizes, in order to attain improved spatial resolution in (µ-CT tests applied in Portland cement composites, makes researchers perform the fractionation of materials to obtain samples with dimensions compatible with the capacity of the scanning equipment, which might cause alterations in the microstructure under analysis. Therefore, a test specimen (TS with dimensions compatible with the scanning capacity of a microtomography system that operates with an X-ray tube and voltage ranging from 20 to 100 kV was proposed. Axial compression strength tests were made and their total porosity was assessed by an apparent density and solid fraction density ratio, which were obtained by means of mercury and helium pycnometry and µ-CT technique, respectively. The adoption of that TS has shown to be viable for providing a sample with a higher level of representation.

Simplifying consent for HIV testing is associated with an increase in HIV testing and case detection in highest risk groups, San Francisco January 2003-June 2007.

Directory of Open Access Journals (Sweden)

Nicola M Zetola

2008-07-01

Full Text Available Populations at highest risk for HIV infection face multiple barriers to HIV testing. To facilitate HIV testing procedures, the San Francisco General Hospital Medical Center eliminated required written patient consent for HIV testing in its medical settings in May 2006. To describe the change in HIV testing rates in different hospital settings and populations after the change in HIV testing policy in the SFDH medical center, we performed an observational study using interrupted time series analysis.Data from all patients aged 18 years and older seen from January 2003 through June 2007 at the San Francisco Department of Public Health (SFDPH medical care system were included in the analysis. The monthly HIV testing rate per 1000 had patient-visits was calculated for the overall population and stratified by hospital setting, age, sex, race/ethnicity, homelessness status, insurance status and primary language.By June 2007, the average monthly rate of HIV tests per 1000 patient-visits increased 4.38 (CI, 2.17-6.60, p<0.001 over the number predicted if the policy change had not occurred (representing a 44% increase. The monthly average number of new positive HIV tests increased from 8.9 (CI, 6.3-11.5 to 14.9 (CI, 10.6-19.2, p<0.001, representing a 67% increase. Although increases in HIV testing were seen in all populations, populations at highest risk for HIV infection, particularly men, the homeless, and the uninsured experienced the highest increases in monthly HIV testing rates after the policy change.The elimination of the requirement for written consent in May 2006 was associated with a significant and sustained increase in HIV testing rates and HIV case detection in the SFDPH medical center. Populations facing the higher barriers to HIV testing had the highest increases in HIV testing rates and case detection in response to the policy change.

Critical Code: Software Producibility for Defense

Science.gov (United States)

2010-01-01

in fatal x-ray doses being administered to cancer patients. static analysis. The results of tests that fail are manifestations of errors (unit tests...ray doses being administered to cancer patients. static analysis. The results of tests that fail are manifestations of errors (unit tests) or failures...forthcoming. 29 Siobhan O’Mahony, Fernando Cela Diaz, and Evan Mamas , 2005, “IBM and Eclipse (A),” Harvard Business School Case 906007, Cambridge, MA

Evaluation of surveillance case definition in the diagnosis of leptospirosis, using the Microscopic Agglutination Test: a validation study.

Science.gov (United States)

Dassanayake, Dinesh L B; Wimalaratna, Harith; Agampodi, Suneth B; Liyanapathirana, Veranja C; Piyarathna, Thibbotumunuwe A C L; Goonapienuwala, Bimba L

2009-04-22

Leptospirosis is endemic in both urban and rural areas of Sri Lanka and there had been many out breaks in the recent past. This study was aimed at validating the leptospirosis surveillance case definition, using the Microscopic Agglutination Test (MAT). The study population consisted of patients with undiagnosed acute febrile illness who were admitted to the medical wards of the Teaching Hospital Kandy, from 1st July 2007 to 31st July 2008. The subjects were screened to diagnose leptospirosis according to the leptospirosis case definition. MAT was performed on blood samples taken from each patient on the 7th day of fever. Leptospirosis case definition was evaluated in regard to sensitivity, specificity and predictive values, using a MAT titre >or= 1:800 for confirming leptospirosis. A total of 123 patients were initially recruited of which 73 had clinical features compatible with the surveillance case definition. Out of the 73 only 57 had a positive MAT result (true positives) leaving 16 as false positives. Out of the 50 who didn't have clinical features compatible with the case definition 45 had a negative MAT as well (true negatives), therefore 5 were false negatives. Total number of MAT positives was 62 out of 123. According to these results the test sensitivity was 91.94%, specificity 73.77%, positive predictive value and negative predictive values were 78.08% and 90% respectively. Diagnostic accuracy of the test was 82.93%. This study confirms that the surveillance case definition has a very high sensitivity and negative predictive value with an average specificity in diagnosing leptospirosis, based on a MAT titre of >or= 1: 800.

Transfer of drug dissolution testing by statistical approaches: Case study

Science.gov (United States)

AL-Kamarany, Mohammed Amood; EL Karbane, Miloud; Ridouan, Khadija; Alanazi, Fars K.; Hubert, Philippe; Cherrah, Yahia; Bouklouze, Abdelaziz

2011-01-01

The analytical transfer is a complete process that consists in transferring an analytical procedure from a sending laboratory to a receiving laboratory. After having experimentally demonstrated that also masters the procedure in order to avoid problems in the future. Method of transfers is now commonplace during the life cycle of analytical method in the pharmaceutical industry. No official guideline exists for a transfer methodology in pharmaceutical analysis and the regulatory word of transfer is more ambiguous than for validation. Therefore, in this study, Gauge repeatability and reproducibility (R&R) studies associated with other multivariate statistics appropriates were successfully applied for the transfer of the dissolution test of diclofenac sodium as a case study from a sending laboratory A (accredited laboratory) to a receiving laboratory B. The HPLC method for the determination of the percent release of diclofenac sodium in solid pharmaceutical forms (one is the discovered product and another generic) was validated using accuracy profile (total error) in the sender laboratory A. The results showed that the receiver laboratory B masters the test dissolution process, using the same HPLC analytical procedure developed in laboratory A. In conclusion, if the sender used the total error to validate its analytical method, dissolution test can be successfully transferred without mastering the analytical method validation by receiving laboratory B and the pharmaceutical analysis method state should be maintained to ensure the same reliable results in the receiving laboratory. PMID:24109204

Development and Test of a new Concept for Biomass Producer Gas Engines

DEFF Research Database (Denmark)

Ahrenfeldt, Jesper; Foged, Esben Vendelbo; Strand, Rune

The technical requirements and the economical assessment of converting commercial diesel engine gen-sets into high compression spark ignition operation on biomass producer gas have been investigated. Assessments showed that for a 200 kWe gen-set there would be a financial benefit of approximately...... 600.000 DKK corresponding to a reduction of 60% in investment costs compared to the price of a conventional gas engine gen-set. Experimental investigations have been conducted on two identical small scale SI gas engine gen-sets operating on biomass producer gas from thermal gasification of wood....... The engines were operated with two different compression ratios, one with the original compression ratio for natural gas operation 9.5:1, and the second with a compression ratio of 18.5:1 (converted diesel engine). It was shown that high compression ratio SI engine operation was possible when operating...

IMPORTANCE OF CONTEXTUAL DATA IN PRODUCING HEALTH TECHNOLOGY ASSESSMENT RECOMMENDATIONS: A CASE STUDY.

Science.gov (United States)

Poder, Thomas G; Bellemare, Christian A

2018-01-01

Contextual data and local expertise are important sources of data that cannot be ignored in hospital-based health technology assessment (HTA) processes. Despite a lack of or unconvincing evidence in the scientific literature, technology can be recommended in a given context. We illustrate this using a case study regarding biplane angiography for vascular neurointervention. A systematic literature review was conducted, along with an analysis of the context in our setting. The outcomes of interest were radiation doses, clinical complications, procedure times, purchase cost, impact on teaching program, the confidence of clinicians in the technology, quality of care, accessibility, and the volume of activity. A committee comprising managers, clinical experts, physicians, physicists and HTA experts was created to produce a recommendation regarding biplane technology acquisition to replace a monoplane device. The systematic literature review yielded nine eligible articles for analysis. Despite a very low level of evidence in the literature, the biplane system appears to reduce ionizing radiation and medical complications, as well as shorten procedure time. Contextual data indicated that the biplane system could improve operator confidence, which could translate into reduced risk, particularly for complex procedures. In addition, the biplane system can support our institution in its advanced procedures teaching program. Given the advantages provided by the biplane technology in our setting, the committee has recommended its acquisition. Contextual data were of utmost importance in this recommendation. Moreover, this technology should be implemented alongside a responsibility to collect outcome data to optimize clinical protocol in the doses of ionizing delivered.

Case study teaching method improves student performance and perceptions of learning gains.

Science.gov (United States)

Bonney, Kevin M

2015-05-01

Following years of widespread use in business and medical education, the case study teaching method is becoming an increasingly common teaching strategy in science education. However, the current body of research provides limited evidence that the use of published case studies effectively promotes the fulfillment of specific learning objectives integral to many biology courses. This study tested the hypothesis that case studies are more effective than classroom discussions and textbook reading at promoting learning of key biological concepts, development of written and oral communication skills, and comprehension of the relevance of biological concepts to everyday life. This study also tested the hypothesis that case studies produced by the instructor of a course are more effective at promoting learning than those produced by unaffiliated instructors. Additionally, performance on quantitative learning assessments and student perceptions of learning gains were analyzed to determine whether reported perceptions of learning gains accurately reflect academic performance. The results reported here suggest that case studies, regardless of the source, are significantly more effective than other methods of content delivery at increasing performance on examination questions related to chemical bonds, osmosis and diffusion, mitosis and meiosis, and DNA structure and replication. This finding was positively correlated to increased student perceptions of learning gains associated with oral and written communication skills and the ability to recognize connections between biological concepts and other aspects of life. Based on these findings, case studies should be considered as a preferred method for teaching about a variety of concepts in science courses.

Case Study Teaching Method Improves Student Performance and Perceptions of Learning Gains

Directory of Open Access Journals (Sweden)

Kevin M. Bonney

2015-02-01

Full Text Available Following years of widespread use in business and medical education, the case study teaching method is becoming an increasingly common teaching strategy in science education. However, the current body of research provides limited evidence that the use of published case studies effectively promotes the fulfillment of specific learning objectives integral to many biology courses. This study tested the hypothesis that case studies are more effective than classroom discussions and textbook reading at promoting learning of key biological concepts, development of written and oral communication skills, and comprehension of the relevance of biological concepts to everyday life. This study also tested the hypothesis that case studies produced by the instructor of a course are more effective at promoting learning than those produced by unaffiliated instructors. Additionally, performance on quantitative learning assessments and student perceptions of learning gains were analyzed to determine whether reported perceptions of learning gains accurately reflect academic performance. The results reported here suggest that case studies, regardless of the source, are significantly more effective than other methods of content delivery at increasing performance on examination questions related to chemical bonds, osmosis and diffusion, mitosis and meiosis, and DNA structure and replication. This finding was positively correlated to increased student perceptions of learning gains associated with oral and written communication skills and the ability to recognize connections between biological concepts and other aspects of life. Based on these findings, case studies should be considered as a preferred method for teaching about a variety of concepts in science courses.

How many cervical cancer cases can potentially be prevented using a more sensitive screening test at young age?

NARCIS (Netherlands)

I.M.C.M. de Kok (Inge); J.M. van Rosmalen (Joost); K. Rozemeijer (Kirsten); C. Penning (Corine); M. van Ballegooijen (Marjolein)

2014-01-01

textabstractThe human papilloma virus (HPV) DNA test has higher sensitivity than cytology for cervical cancer screening. Therefore, cervical cancer cases that are missed by cytology could potentially be identified if we use primary HPV testing. Studies showed that HPV screening is the preferred

Using Multiple Big Datasets and Machine Learning to Produce a New Global Particulate Dataset: A Technology Challenge Case Study

Science.gov (United States)

Lary, D. J.

2013-12-01

A BigData case study is described where multiple datasets from several satellites, high-resolution global meteorological data, social media and in-situ observations are combined using machine learning on a distributed cluster using an automated workflow. The global particulate dataset is relevant to global public health studies and would not be possible to produce without the use of the multiple big datasets, in-situ data and machine learning.To greatly reduce the development time and enhance the functionality a high level language capable of parallel processing has been used (Matlab). A key consideration for the system is high speed access due to the large data volume, persistence of the large data volumes and a precise process time scheduling capability.

Low Temperature Particle Filtration of Producer Gas with Low Tar Content

DEFF Research Database (Denmark)

Hindsgaul, Claus

This report describes the tests of different techniques for removing the particulates from producer gas from the 100 kW two-stage down-draft gasifier at DTU1 . The goal of the tests was to identify and implement methods to remove soot particles from producer gas with low tar content. During the f...

Using open hole and cased-hole resistivity logs to monitor gas hydrate dissociation during a thermal test in the mallik 5L-38 research well, Mackenzie Delta, Canada

Science.gov (United States)

Anderson, B.I.; Collett, T.S.; Lewis, R.E.; Dubourg, I.

2008-01-01

Gas hydrates, which are naturally occurring ice-like combinations of gas and water, have the potential to provide vast amounts of natural gas from the world's oceans and polar regions. However, producing gas economically from hydrates entails major technical challenges. Proposed recovery methods such as dissociating or melting gas hydrates by heating or depressurization are currently being tested. One such test was conducted in northern Canada by the partners in the Mallik 2002 Gas Hydrate Production Research Well Program. This paper describes how resistivity logs were used to determine the size of the annular region of gas hydrate dissociation that occurred around the wellbore during the thermal test in the Mallik 5L-38 well. An open-hole logging suite, run prior to the thermal test, included array induction, array laterolog, nuclear magnetic resonance and 1.1-GHz electromagnetic propagation logs. The reservoir saturation tool was run both before and after the thermal test to monitor formation changes. A cased-hole formation resistivity log was run after the test.Baseline resistivity values in each formation layer (Rt) were established from the deep laterolog data. The resistivity in the region of gas hydrate dissociation near the wellbore (Rxo) was determined from electromagnetic propagation and reservoir saturation tool measurements. The radius of hydrate dissociation as a function of depth was then determined by means of iterative forward modeling of cased-hole formation resistivity tool response. The solution was obtained by varying the modeled dissociation radius until the modeled log overlaid the field log. Pretest gas hydrate production computer simulations had predicted that dissociation would take place at a uniform radius over the 13-ft test interval. However, the post-test resistivity modeling showed that this was not the case. The resistivity-derived dissociation radius was greatest near the outlet of the pipe that circulated hot water in the wellbore

Multiple myeloma presenting as CEA-producing rectal cancer.

Science.gov (United States)

Talamo, Giampaolo; Barochia, Amitkumar; Zangari, Maurizio; Loughran, Thomas P

2010-03-31

We report the case of a 57-year-old patient with multiple myeloma, characterized by extramedullary involvement of the rectum at presentation. Malignant plasma cells were found to produce carcinoembryonic antigen (CEA), a tumor antigen more commonly associated with rectal adenocarcinomas.

Nonlinear Pricing to Produce Information

OpenAIRE

David J. Braden; Shmuel S. Oren

1994-01-01

We investigate the firm's dynamic nonlinear pricing problem when facing consumers whose tastes vary according to a scalar index. We relax the standard assumption that the firm knows the distribution of this index. In general the firm should determine its marginal price schedule as if it were myopic, and produce information by lowering the price schedule; “bunching” consumers at positive purchase levels should be avoided. As a special case we also consider a market characterized by homogeneous...

THE OCCURRENCE OF MICROMYCETES IN APPLES AND THEIR POTENTIAL ABILITY TO PRODUCE MYCOTOXINS

Directory of Open Access Journals (Sweden)

Dana Tančinová

2013-02-01

Full Text Available The aim of this study was to determinate microscopic fungi involved in rot of apples in market and to test isolated potentially toxigenic species for ability to produce chosen mycotoxins in conditions in vitro. From 30 apples with rotting were isolated and identificated 8 genera (Penicillium, Monilinia, Botrytis, Aspergillus, Cladosporium, Epicoccum, Fusarium and Geotrichum of filamentous fungi. The most frequent (40% rot apples was Penicillium expansum, the most important producer of rotting during storage of apples. For the ability to produce mycotoxins in vitro were tested isolates, potential producers of mycotoxins. All tested isolates were determinated as producers of mycotoxins: Penicillium expansum (patulin and citrinin, 12 isolates, Penicillium citrinum (citrinin, 1 isolate, Penicillium roqueforti (roquefotin C, 1 isolate and Aspergillus versicolor (sterigmatocystin, 1 isolate.

Tribological Characteristic of Titanium Alloy Surface Layers Produced by Diode Laser Gas Nitriding

Directory of Open Access Journals (Sweden)

Lisiecki A.

2016-06-01

Full Text Available In order to improve the tribological properties of titanium alloy Ti6Al4V composite surface layers Ti/TiN were produced during laser surface gas nitriding by means of a novel high power direct diode laser with unique characteristics of the laser beam and a rectangular beam spot. Microstructure, surface topography and microhardness distribution across the surface layers were analyzed. Ball-on-disk tests were performed to evaluate and compare the wear and friction characteristics of surface layers nitrided at different process parameters, base metal of titanium alloy Ti6Al4V and also the commercially pure titanium. Results showed that under dry sliding condition the commercially pure titanium samples have the highest coefficient of friction about 0.45, compared to 0.36 of titanium alloy Ti6Al4V and 0.1-0.13 in a case of the laser gas nitrided surface layers. The volume loss of Ti6Al4V samples under such conditions is twice lower than in a case of pure titanium. On the other hand the composite surface layer characterized by the highest wear resistance showed almost 21 times lower volume loss during the ball-on-disk test, compared to Ti6Al4V samples.

In Vitro Antimicrobial Susceptibility Testing of Animal Nocardia Isolated from Field Cases of Skin Diseases

Directory of Open Access Journals (Sweden)

M. A. Oyekunle

2001-03-01

Full Text Available In vitro antimicrobial tests were carried out on strains of Nocardia isolated from field cases of cutaneous nocardiosis in farm animals. Results with the disc diffusion test showed the multiresistant nature of the isolates, but 23.81 and 21.43% were sensitive to ciprofloxacin and gentamycin, respectively. The MIC mode and range for oxytetracycline were 12.5 and 3.12–25 μg/ml, respectively, while those of erythromycin were 3.12 and 0.78–6.25 μg/ml, respectively.

The Application of Classification and Regression Trees for the Triage of Women for Referral to Colposcopy and the Estimation of Risk for Cervical Intraepithelial Neoplasia: A Study Based on 1625 Cases with Incomplete Data from Molecular Tests

Directory of Open Access Journals (Sweden)

Abraham Pouliakis

2015-01-01

Full Text Available Objective. Nowadays numerous ancillary techniques detecting HPV DNA and mRNA compete with cytology; however no perfect test exists; in this study we evaluated classification and regression trees (CARTs for the production of triage rules and estimate the risk for cervical intraepithelial neoplasia (CIN in cases with ASCUS+ in cytology. Study Design. We used 1625 cases. In contrast to other approaches we used missing data to increase the data volume, obtain more accurate results, and simulate real conditions in the everyday practice of gynecologic clinics and laboratories. The proposed CART was based on the cytological result, HPV DNA typing, HPV mRNA detection based on NASBA and flow cytometry, p16 immunocytochemical expression, and finally age and parous status. Results. Algorithms useful for the triage of women were produced; gynecologists could apply these in conjunction with available examination results and conclude to an estimation of the risk for a woman to harbor CIN expressed as a probability. Conclusions. The most important test was the cytological examination; however the CART handled cases with inadequate cytological outcome and increased the diagnostic accuracy by exploiting the results of ancillary techniques even if there were inadequate missing data. The CART performance was better than any other single test involved in this study.

The Application of Classification and Regression Trees for the Triage of Women for Referral to Colposcopy and the Estimation of Risk for Cervical Intraepithelial Neoplasia: A Study Based on 1625 Cases with Incomplete Data from Molecular Tests.

Science.gov (United States)

Pouliakis, Abraham; Karakitsou, Efrossyni; Chrelias, Charalampos; Pappas, Asimakis; Panayiotides, Ioannis; Valasoulis, George; Kyrgiou, Maria; Paraskevaidis, Evangelos; Karakitsos, Petros

2015-01-01

Nowadays numerous ancillary techniques detecting HPV DNA and mRNA compete with cytology; however no perfect test exists; in this study we evaluated classification and regression trees (CARTs) for the production of triage rules and estimate the risk for cervical intraepithelial neoplasia (CIN) in cases with ASCUS+ in cytology. We used 1625 cases. In contrast to other approaches we used missing data to increase the data volume, obtain more accurate results, and simulate real conditions in the everyday practice of gynecologic clinics and laboratories. The proposed CART was based on the cytological result, HPV DNA typing, HPV mRNA detection based on NASBA and flow cytometry, p16 immunocytochemical expression, and finally age and parous status. Algorithms useful for the triage of women were produced; gynecologists could apply these in conjunction with available examination results and conclude to an estimation of the risk for a woman to harbor CIN expressed as a probability. The most important test was the cytological examination; however the CART handled cases with inadequate cytological outcome and increased the diagnostic accuracy by exploiting the results of ancillary techniques even if there were inadequate missing data. The CART performance was better than any other single test involved in this study.

Applications of irradiation in horticultural produce

International Nuclear Information System (INIS)

O'Beirne, David

1985-01-01

In the case of horticultural produce, the usefulness of irradiation is selective and irradiation may be most beneficial when used in conjunction with other preservative treatments such as mild refrigeration. Big benefits may be derived from energy saving in the degree of chilling required, in extended shelf-life and in quality retention with particular reference to mushrooms and strawberries. Research in the Irish context is urgently required

CASE REPORT CASE CASE Conned by Conn's syndrome

African Journals Online (AJOL)

2008-01-08

Jan 8, 2008 ... ing of the aldosterone-producing adenoma (APA) can prove challenging but is nonetheless very important for surgical planning and cure. We present two patients with MRI (magnetic resonance imaging) confirma- tion of APA with negative and equivocal CT (computed tomography) scans. Case 1.

Duct-ectatic type of mucin producing tumor of the pancreas--new concept of pancreatic neoplasia.

Science.gov (United States)

Kimura, W; Sasahira, N; Yoshikawa, T; Muto, T; Makuuchi, M

1996-01-01

Although there have been recent reports of mucin-producing tumor of the pancreas, there has been no thorough clinicopathological analysis of a large number of cases. Two hundred forty four cases of mucin-producing tumor of the pancreas from Japanese, European and American reports, together with 15 cases of our own, were analyzed clinicopathologically. Mucin-producing tumor of the pancreas was found in 177 males and 82 females (M:F = 2.2:1). The mean age was 65.5 years. Jaundice, diabetes mellitus and a past history of pancreatitis were found in 15%-19% of the cases. The tumor was most frequently (62%) found in the head of the pancreas. Pathologically, hyperplasia or adenoma was found in 58 cases, and adenocarcinoma in 160 cases. Five-year-survival rate by the Kaplan-Meier method was 82.6% in all of the cases and postoperative survival curve was much better in cases with this type of carcinoma than in cases with ordinary pancreatic duct cell carcinoma (5-year-survival rate: 82.6% vs 17.3%). Serum tumor markers such as CEA or CA 19-9 were not effective in differentiating between benign and malignant, or in determining the degree of cancerous spread, while cytology of the pancreatic juice and biopsy of the tumor could contribute to the diagnosis. Mucin-producing tumor has unique clinicopathological characteristics, such as the dilated main pancreatic duct or branches, dilatation of the orifice of the papilla of Vater, or good prognosis. Since a diagnosis for benign or malignant is very difficult in some cases, methods for distinguishing benign from malignant lesions or for determining cancerous spread, such as molecular biological techniques, should be established.

Beating the Odds! Build theory from emerging markets phenomenon and the emergence of case study research—A “Test-Tube” typology

Directory of Open Access Journals (Sweden)

Kotapati Srinivasa Reddy

2015-12-01

Full Text Available The extant social sciences and management theoretical concepts and empirical literature have mostly determined based on western (developed economies institutional context. In the recent past, a number of researchers have argued that the western theories are inadequate to study the emerging markets phenomenon and described the problems relating to data collection, data analysis, and theory development. I also (experience confirm that major problems are relating to the research data collection, especially primary data (interview and survey methods. With this in mind, I develop a new case study research design, that is, “Test-Tube” typology, to build theory from emerging markets behavior as well as to add new knowledge to the mass of disciplines, particularly social sciences, medicine, travel, tourism and hospitality, sports, management, and information systems, and engineering. I design a typology that consists of eleven steps: case development, case selection, relatedness and pattern matching, case analysis, cross-case analysis, theoretical constructs, pre-testing and development, adjusting theoretical constructs, theory testing, building theory and testable propositions, and suggesting strategic swap model. Further, I suggest a set of few guidelines on how to measure the research quality and how to strengthen the research rigor in case study settings.

How Do Cultural Producers Make Creative Decisions? Lessons from the Catwalk

Science.gov (United States)

Godart, Frederic C. Mears, Ashley

2009-01-01

Faced with high uncertainty, how do producers in the cultural economy make creative decisions? We present a case study of the fashion modeling industry. Using participant observation, interviews and network analysis of the Spring/Summer 2007 Fashion Week collections, we explain how producers select models for fashion shows. While fashion producers…

A brief overview of the distribution test grids with a distributed generation inclusion case study

Directory of Open Access Journals (Sweden)

Stanisavljević Aleksandar M.

2018-01-01

Full Text Available The paper presents an overview of the electric distribution test grids issued by different technical institutions. They are used for testing different scenarios in operation of a grid for research, benchmarking, comparison and other purposes. Their types, main characteristics, features as well as application possibilities are shown. Recently, these grids are modified with inclusion of distributed generation. An example of modification and application of the IEEE 13-bus for testing effects of faults in cases without and with a distributed generator connection to the grid is presented. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. III 042004: Smart Electricity Distribution Grids Based on Distribution Management System and Distributed Generation

Manual for reactor produced radioisotopes

International Nuclear Information System (INIS)

2003-01-01

Radioisotopes find extensive applications in several fields including medicine, industry, agriculture and research. Radioisotope production to service different sectors of economic significance constitutes an important ongoing activity of many national nuclear programmes. Radioisotopes, formed by nuclear reactions on targets in a reactor or cyclotron, require further processing in almost all cases to obtain them in a form suitable for use. Specifications for final products and testing procedures for ensuring quality are also an essential part of a radioisotope production programme. The International Atomic Energy Agency (IAEA) has compiled and published such information before for the benefit of laboratories of Member States. The first compilation, entitled Manual of Radioisotope Production, was published in 1966 (Technical Reports Series No. 63). A more elaborate and comprehensive compilation, entitled Radioisotope Production and Quality Control, was published in 1971 (Technical Reports Series No. 128). Both served as useful reference sources for scientists working in radioisotope production worldwide. The 1971 publication has been out of print for quite some time. The IAEA convened a consultants meeting to consider the need for compiling an updated manual. The consultants recommended the publication of an updated manual taking the following into consideration: significant changes have taken place since 1971 in many aspects of radioisotope production; many radioisotopes have been newly introduced while many others have become gradually obsolete; considerable experience and knowledge have been gained in production of important radioisotopes over the years, which can be preserved through compilation of the manual; there is still a need for a comprehensive manual on radioisotope production methods for new entrants to the field, and as a reference. It was also felt that updating all the subjects covered in the 1971 manual at a time may not be practical considering the

Test of models for electron transport in laser produced plasmas

International Nuclear Information System (INIS)

Colombant, D.G.; Manheimer, W.M.; Busquet, M.

2005-01-01

This paper examines five different models of electron thermal transport in laser produced spherical implosions. These are classical, classical with a flux limit f, delocalization, beam deposition model, and Fokker-Planck solutions. In small targets, the results are strongly dependent on f for flux limit models, with small f's generating very steep temperature gradients. Delocalization models are characterized by large preheat in the center of the target. The beam deposition model agrees reasonably well with the Fokker-Planck simulation results. For large, high gain fusion targets, the delocalization model shows the gain substantially reduced by the preheat. However, flux limitation models show gain largely independent of f, with the beam deposition model also showing the same high gain

Hypnosis and Osteopathic Manipulative Treatment for Visual Disorders During Pregnancy: A Case Report.

Science.gov (United States)

Russo, Giancarlo; Remonato, Alessandro; Remonato, Roberto; Zanier, Emiliano

2017-01-01

Context • Pregnancy causes physiological alterations to the visual system, particularly in relation to retinal vascularization, with a consequent increase of intraocular pressure, and to the lacrimal fluid, with a consequent ocular dryness, which both can lead to a reduction in visual acuity. Numerous case reports refer to the employment of hypnotic treatment in cases of myopia, but the literature does not report any case of decreased visual acuity postpartum that was treated with hypnosis. Objective • For women with visual disorders that had appeared during pregnancy or were preexisting, the study intended to evaluate the benefits of treatment of the diaphragm by hypnotherapy and osteopathy to modify intracorporeal pressure and restore the women's visual function. Design • The research team performed a case study. Setting • The setting was a private osteopathic clinic. Participant • The participant was a 35-y-old woman lacking visual acuity postpartum. Intervention • The study took place during a period of 1 d. The participant first took part in a hypnotherapy session, the first intervention, and then participated in an osteopathic session, the second intervention. Outcome Measures • For the first evaluation of visual function at baseline, 3 tests were performed: (1) a visual acuity test; (2) a cover test for near and distance vision; and (3) a test for near point convergence. The visual function evaluation (all 3 tests) occurred after the 2 types of treatment (T1, T2). Finally, a visual function evaluation (all 3 tests) occurred at a follow-up session 1 mo after the end of treatment (T3). Results • The intervention produced a significant improvement in visual acuity, due to the multidisciplinary approach of treatment with hypnotherapy and osteopathy, and achieved a result that was maintained in the medium term. Conclusions • Hypnosis and osteopathy produced a significant improvement in visual acuity and the result was maintained in the medium

Retention of Prose Following Testing with Different Types of Tests.

Science.gov (United States)

Duchastel, Philippe C.

1981-01-01

Taking a test on a passage one has just studied is known to enhance later retention. This effect was influenced by the type of initial test used. It was evident in the case of the initial short-answer test, but not in the case of multiple choice and free recall tests. (Author/RD)

Potential application of the consistency approach for vaccine potency testing.

Science.gov (United States)

Arciniega, J; Sirota, L A

2012-01-01

The Consistency Approach offers the possibility of reducing the number of animals used for a potency test. However, it is critical to assess the effect that such reduction may have on assay performance. Consistency of production, sometimes referred to as consistency of manufacture or manufacturing, is an old concept implicit in regulation, which aims to ensure the uninterrupted release of safe and effective products. Consistency of manufacture can be described in terms of process capability, or the ability of a process to produce output within specification limits. For example, the standard method for potency testing of inactivated rabies vaccines is a multiple-dilution vaccination challenge test in mice that gives a quantitative, although highly variable estimate. On the other hand, a single-dilution test that does not give a quantitative estimate, but rather shows if the vaccine meets the specification has been proposed. This simplified test can lead to a considerable reduction in the number of animals used. However, traditional indices of process capability assume that the output population (potency values) is normally distributed, which clearly is not the case for the simplified approach. Appropriate computation of capability indices for the latter case will require special statistical considerations.

Deuterium retention properties of co-deposited carbon films produced at wall gaps

International Nuclear Information System (INIS)

Nobuta, Yuji; Kanazawa, Jun; Yamauchi, Yuji; Hino, Tomoaki; Yokoyama, Kenji; Suzuki, Satoshi; Ezato, Koichiro; Enoeda, Mikio; Akiba, Masato; Akamaru, Satoshi; Hatano, Yuji

2013-01-01

Deuterium retention properties in co-deposited carbon film produced in gap and the relationship between this retention behavior and the crystal structure of carbon film were investigated. In the case of a wide gap, the atomic ratio of deuterium to carbon (D/C) in the film was almost constant at any depth in the gap, while in the case of a narrow gap the D/C ratio decreased with increasing distance from the gap entrance. The micro structure of carbon film tended to be more amorphous for the film produced at locations deeper in the gap. Thermal desorption spectra of D 2 in the film produced near the gap entrance showed one broad main peak at around 1100 K, while that in the film produced near the bottom showed very sharp peaks at around 950 K. This difference in desorption behavior was related with the differences of micro structure. (author)

Treatment of Oil & Gas Produced Water.

Energy Technology Data Exchange (ETDEWEB)

Dwyer, Brian P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-02-01

Production of oil and gas reserves in the New Mexico Four Corners Region results in large volumes of "produced water". The common method for handling the produced water from well production is re-injection in regulatory permitted salt water disposal wells. This is expensive (%7E $5/bbl.) and does not recycle water, an ever increasingly valuable commodity. Previously, Sandia National Laboratories and several NM small business tested pressure driven membrane-filtration techniques to remove the high TDS (total dissolved solids) from a Four Corners Coal Bed Methane produced water. Treatment effectiveness was less than optimal due to problems with pre-treatment. Inadequate pre-treatment allowed hydrocarbons, wax and biological growth to foul the membranes. Recently, an innovative pre-treatment scheme using ozone and hydrogen peroxide was pilot tested. Results showed complete removal of hydrocarbons and the majority of organic constituents from a gas well production water. ACKNOWLEDGEMENTS This report was made possible through funding from the New Mexico Small Business Administration (NMSBA) Program at Sandia National Laboratories. Special thanks to Juan Martinez and Genaro Montoya for guidance and support from project inception to completion. Also, special thanks to Frank McDonald, the small businesses team POC, for laying the ground work for the entire project; Teresa McCown, the gas well owner and very knowledgeable- fantastic site host; Lea and Tim Phillips for their tremendous knowledge and passion in the oil & gas industry.; and Frank Miller and Steve Addleman for providing a pilot scale version of their proprietary process to facilitate the pilot testing.

17,20β-P and cortisol are the main in vitro metabolites of 17-hydroxy-progesterone produced by spermiating testes of Micropogonias furnieri (Desmarest, 1823 (Perciformes: Sciaenidae

Directory of Open Access Journals (Sweden)

Denise Vizziano Cantonnet

Full Text Available The aim was to investigate the major C21 steroids produced by spermiating white croaker Micropogonias furnieri (Sciaenidae in order to establish the potential mediator of gamete maturation in males of this species. The testes steroid production at the spawning season was identified incubating the 3H-17-hydroxy-4-pregnene-3,20-dione precursor through thin layer chromatography, high pressure liquid chromatography, enzymatic oxydation, acetylation and immunochemistry analyses. 17,20β-Dihydroxy-4-pregnen-3-one (17,20β-P and 11β,17,21-Trihydroxy-4-pregnene-3,20-dione (cortisol were the main metabolites produced. Contrary to what we expected, 17,20β,21-Trihydroxy-4-pregnen-3-one was not detected. Circulating levels of 17,20β-P were undetectable in immature testes and in those at the first spermatogenesis stages, while a clear increase was observed during the whole spermatogenesis and spermiation phases (from undetectable to 1047 pg mL-1. In vitro studies together with plasma detection suggest that 17,20β-P is a good steroid candidate involved in M. furnieri testes maturation. The role of cortisol during late phases of testes development needs further studies.

Multiple myeloma presenting as CEA-producing rectal cancer

Directory of Open Access Journals (Sweden)

Giampaolo Talamo

2010-03-01

Full Text Available We report the case of a 57-year old patient with multiple myeloma, characterized by extramedullary involvement of the rectum at presentation. Malignant plasma cells were found to produce carcinoembryonic antigen (CEA, a tumor antigen more commonly associated with rectal adenocarcinomas.

Emergence of ESBL-producing organisms in Mongolia

International Nuclear Information System (INIS)

Khosbayar, T.; Lkhamsuren, E.; Sop, C.Y.; Pak, C.Y.

2007-01-01

Full text: Extended spectrum β-lactamase is most commonly produced by strains of K.pneumoniae and E.coli, and TEM, SHV, CTX-M and AmpC types of the ESBLs are commonly spread among different nations. Previous investigators have already established that certain strains or ''epidemic clones'' of ESBL producing organisms spread within and also among hospitals. Although, some clones may disseminate regionally. Other authors emphasize the importance of plasmid transfer, rather than strain spread and plasmid encoding ESBL can transmit between different species of the family Enterobacteriaceae. The genes encoding these β-lactamases are often located on large plasmids that also encode genes for resistance to other antibiotics, including aminoglycosides, tetracycline, sulfonamides, trimethoprim and chloramphenicol. Furthermore, there is an increasing tendency for pathogens to produce multiple Β-lactamases. Some isolate of Klebsiella pneumoniae which is multiply resistant, expresses a minimum of five different β-lactamases, most of which are encoded on one large transferable plasmid. Materials and Methods: Nonrepetitive ESBL producing E. coli, K. pneumoniae and E.cloaceae isolates were collected in the bacteriology laboratory at Maternal and Child Research Institution, Ulaanbaatar (the biggest and central hospital facility for reproductive health service in Mongolia) in 2001, 2002, 2005, and 2006. Isolates were identified by conventional biochemical testing. Antimicrobial susceptibility were tested by disk diffusion test and MICs of some -lactams were determined alone or in combination with a fixed concentration of either clavulanic acid (2 μg/ml) according to the guideline of the National Committee for Clinical Laboratory Standards (NCCLS). ESBL production was screened using cefpodoxime disks and was confirmed by the double-disk synergy test. For detection of resistance transfer by conjugation, agar-mating technique was used with cultures of E.coli J53 Azir. PCRs with

Mycotoxins, drugs and other extrolites produced by species in Penicillium subgenus Penicillium

DEFF Research Database (Denmark)

Frisvad, Jens Christian; Smedsgaard, Jørn; Larsen, Thomas Ostenfeld

2004-01-01

extrolite families are reported from the subgenus with an average of 5 extrolite families per species. This is an underestimate as several pigments, volatiles and uncharacterized extrolites are not included in this average. Several reported producers are reidentified and new producers of known extrolites...... species in Penicillium subgenus Penicillium. In most cases these extrolites are produced consistently by all isolates examined in a species. The important antibiotic penicillin is produced by all members of series Chrysogena and P. griseofulvum. The cholesterol-lowering agent compactin is produced by P...

Quality Label as the Guarantee of Top Quality Agricultural and Food Products Produced in Slovak Republic – a Case Study of Slovak Food Market

Directory of Open Access Journals (Sweden)

Ingrida Košičiarová

2016-01-01

Full Text Available The aim of the present paper was to determine the Slovak consumer’s opinion about the purchase and quality level of agricultural and food products produced in the Slovak Republic, as well as to determine their knowledge and preference of the National Quality Label “Značka kvality SK”. As research methods, there have been used the methods of survey and structured questionnaire consisting of 22 questions. The total number of respondents was 2.808 randomly selected respondents from all over the Slovak Republic. For a deeper analysis of the obtained results, there have been set out nine hypothesis, which have been tested with the use of Pearson’s chi-square test, Fisher’s exact test, Mann-Whitney U-Test and Cramer’s contingency coefficient. The results of the present paper show, that the knowledge and preference of higher quality food is between Slovak consumers on a pretty high level – more than 44 % respondents think that they buy higher quality products, more than 49 % of respondents think that the agricultural and food products produced in Slovak Republic are rather higher and higher quality, more than 58 % of respondents know the Quality Label “Značka kvality SK”, over 56 % of respondents could describe its logo, more than 60 % of them could spontaneously name five brands, respectively products labelled with this Quality Label and almost 50 % of respondents buy also the ecological products.

Evaluation of the entropy consistent euler flux on 1D and 2D test problems

Science.gov (United States)

Roslan, Nur Khairunnisa Hanisah; Ismail, Farzad

2012-06-01

Perhaps most CFD simulations may yield good predictions of pressure and velocity when compared to experimental data. Unfortunately, these results will most likely not adhere to the second law of thermodynamics hence comprising the authenticity of predicted data. Currently, the test of a good CFD code is to check how much entropy is generated in a smooth flow and hope that the numerical entropy produced is of the correct sign when a shock is encountered. Herein, a shock capturing code written in C++ based on a recent entropy consistent Euler flux is developed to simulate 1D and 2D flows. Unlike other finite volume schemes in commercial CFD code, this entropy consistent flux (EC) function precisely satisfies the discrete second law of thermodynamics. This EC flux has an entropy-conserved part, preserving entropy for smooth flows and a numerical diffusion part that will accurately produce the proper amount of entropy, consistent with the second law. Several numerical simulations of the entropy consistent flux have been tested on two dimensional test cases. The first case is a Mach 3 flow over a forward facing step. The second case is a flow over a NACA 0012 airfoil while the third case is a hypersonic flow passing over a 2D cylinder. Local flow quantities such as velocity and pressure are analyzed and then compared with mainly the Roe flux. The results herein show that the EC flux does not capture the unphysical rarefaction shock unlike the Roe-flux and does not easily succumb to the carbuncle phenomenon. In addition, the EC flux maintains good performance in cases where the Roe flux is known to be superior.

A hybrid model for combining case-control and cohort studies in systematic reviews of diagnostic tests

Science.gov (United States)

Chen, Yong; Liu, Yulun; Ning, Jing; Cormier, Janice; Chu, Haitao

2014-01-01

Systematic reviews of diagnostic tests often involve a mixture of case-control and cohort studies. The standard methods for evaluating diagnostic accuracy only focus on sensitivity and specificity and ignore the information on disease prevalence contained in cohort studies. Consequently, such methods cannot provide estimates of measures related to disease prevalence, such as population averaged or overall positive and negative predictive values, which reflect the clinical utility of a diagnostic test. In this paper, we propose a hybrid approach that jointly models the disease prevalence along with the diagnostic test sensitivity and specificity in cohort studies, and the sensitivity and specificity in case-control studies. In order to overcome the potential computational difficulties in the standard full likelihood inference of the proposed hybrid model, we propose an alternative inference procedure based on the composite likelihood. Such composite likelihood based inference does not suffer computational problems and maintains high relative efficiency. In addition, it is more robust to model mis-specifications compared to the standard full likelihood inference. We apply our approach to a review of the performance of contemporary diagnostic imaging modalities for detecting metastases in patients with melanoma. PMID:25897179

Do Different Tests of Episodic Memory Produce Consistent Results in Human Adults?

Science.gov (United States)

Cheke, Lucy G.; Clayton, Nicola S.

2013-01-01

A number of different philosophical, theoretical, and empirical perspectives on episodic memory have led to the development of very different tests with which to assess it. Although these tests putatively assess the same psychological capacity, they have rarely been directly compared. Here, a sample of undergraduates was tested on three different…

Cefepime versus extended spectrum β-lactamase-producing Enterobacteriaceae

Directory of Open Access Journals (Sweden)

Keite da Silva Nogueira

Full Text Available The objective of this study was to evaluate the susceptibility to cefepime of a large group of ESBL- producing enterobacteria recently isolated in a Brazilian teaching hospital . The study included 280 strains of ESBL-producing enterobacteria, isolated between 2005 and 2008. The presence of the genes blaCTX-M, blaTEM and blaSHV was determined by PCR and confirmed by nucleotide sequencing. Susceptibility testing for cefepime was performed by disc-diffusion, agar dilution method and E-test®. Among the isolates, 34 (12.1% presented a cefepime inhibition zone > 21 and MIC < 8 mg/L by agar dilution and E-strip methods. The use of cefepime for the treatment of infections caused by ESBL-producing bacteria has been controversial. Some studies of PD/PK show the probability of achieving the required PD parameters for cefepime, when the MICs were < 8 mg/L, whereas others have reported therapeutic failure with the same MIC. Additional data is essential to come to terms about the report and treatment with cefepime in ESBL-producing organisms especially when these microorganisms are isolated from sterile sites and from critically ill patients.

PILOT TESTING: PRETREATMENT OPTIONS TO ALLOW RE-USE OF FRAC FLOWBACK AND PRODUCED BRINE FOR GAS SHALE RESOURCE DEVELOPMENT

Energy Technology Data Exchange (ETDEWEB)

Burnett, David

2012-12-31

The goal of the A&M DOE NETL Project No. DE-FE0000847 was to develop a mobile, multifunctional water treatment capability designed specifically for “pre-treatment” of field waste brine. The project consisted of constructing s mobile “field laboratory” incorporating new technology for treating high salinity produced water and using the lab to conduct a side-by-side comparison between this new technology and that already existing in field operations. A series of four field trials were performed utilizing the mobile unit to demonstrate the effectiveness of different technology suitable for use with high salinity flow back brines and produced water. The design of the mobile unit was based on previous and current work at the Texas A&M Separation Sciences Pilot Plant. The several treatment techniques which have been found to be successful in both pilot plant and field tests had been tested to incorporate into a single multifunctional process train. Eight different components were evaluated during the trials, two types of oil and grease removal, one BTEX removal step, three micro-filters, and two different nanofilters. The performance of each technique was measured by its separation efficiency, power consumption, and ability to withstand fouling. The field trials were a success. Four different field brines were evaluated in the first trial in New York. Over 16,000 gallons of brine were processed. Using a power cost of $.10 per kWh, media pretreatment power use averaged $0.004 per barrel, solids removal $.04 per barrel and brine “softening” $.84 per barrel. Total power cost was approximately $1.00 per barrel of fluid treated. In Pennsylvania, brines collected from frac ponds were tested in two additional trials. Each of the brines was converted to an oil-free, solids-free brine with no biological activity. Brines were stable over time and would be good candidates for use as a make-up fluid in a subsequent fracturing fluid design. Reports on all of the field

Soybean biomass produced in Argentina

DEFF Research Database (Denmark)

Semino, Stella Maris; Paul, Helena; Tomei, Julia

2009-01-01

Soybean biomass for biodiesel, produced in Argentina amongst other places, is considered by some to reduce greenhouse gas emissions and mitigate climate change when compared with fossil fuel. To ensure that the production of biofuels is ‘sustainable', EU institutions and national governments...... are currently designing certification schemes for the sustainable production of biomass. This paper questions the validity of proposed environmental standards, using the production of Argentine soybean as a case study. The production of soybean production is associated with profound environmental impacts...

Interpretation, with respect to ASME code Case N-318, of limit moment and fatigue tests of lugs welded to pipe

International Nuclear Information System (INIS)

Foster, D.C.; Van Duyne, D.A.; Budlong, L.A.; Muffett, J.W.; Wais, E.A.; Streck, G.; Rodabaugh, E.C.

1990-01-01

Two nonmandatory ASME code cases have been used often in the evaluation of lugs on nuclear-power- plant piping systems. ASME Code Case N-318 provides guidance for evaluation of the design of rectangular cross-section attachments on Class 2 or 3 piping, and ASME Code Case N-122 provides guidance for evaluation of lugs on Class 1 piping. These code cases have been reviewed and evaluated based on available test data. The results indicate that the Code cases are overly conservative. Recommendations for revisions to the cases are presented which, if adopted, will reduce the overconservatism

Integrated Electrical and Thermal Grid Facility - Testing of Future Microgrid Technologies

Directory of Open Access Journals (Sweden)

Sundar Raj Thangavelu

2015-09-01

Full Text Available This paper describes the Experimental Power Grid Centre (EPGC microgrid test facility, which was developed to enable research, development and testing for a wide range of distributed generation and microgrid technologies. The EPGC microgrid facility comprises a integrated electrical and thermal grid with a flexible and configurable architecture, and includes various distributed energy resources and emulators, such as generators, renewable, energy storage technologies and programmable load banks. The integrated thermal grid provides an opportunity to harness waste heat produced by the generators for combined heat, power and cooling applications, and support research in optimization of combined electrical-thermal systems. Several case studies are presented to demonstrate the testing of different control and operation strategies for storage systems in grid-connected and islanded microgrids. One of the case studies also demonstrates an integrated thermal grid to convert waste heat to useful energy, which thus far resulted in a higher combined energy efficiency. Experiment results confirm that the facility enables testing and evaluation of grid technologies and practical problems that may not be apparent in a computer simulated environment.

Tracer tests Wairakei

International Nuclear Information System (INIS)

McCabe, W.J.; Manning, M.R.; Barry, B.J.

1980-07-01

The report summarises the radioactive tracer tests, using iodine-131 and bromine-82, made in the Wairakei geothermal field over the period 1978-80. Injection of tracer into three wells with strong cool water downflows at about 300-400m below ground level, produced strong rapid responses from the only deep wells feeding from about 800-1000m and lying in the south-westerly direction from the injection wells, i.e. parallel to the fault planes. Shallower wells, even though in some cases much closer to the injection well, reacted much more slowly. Velocities, as measured by peak arrival times, as high as 22m/h over 200m and 11m/h over 650m, were found. The flow patterns for the cool water feeds to the production area are discussed

Social marketing's unique contribution to mental health stigma reduction and HIV testing: two case studies.

Science.gov (United States)

Thackeray, Rosemary; Keller, Heidi; Heilbronner, Jennifer Messenger; Dellinger, Laura K Lee

2011-03-01

Since its inception in 2005, articles in Health Promotion Practice's social marketing department have focused on describing social marketing's unique contributions and the application of each to the practice of health promotion. This article provides a brief review of six unique features (marketing mix, consumer orientation, segmentation, exchange, competition, and continuous monitoring) and then presents two case studies-one on reducing stigma related to mental health and the other a large-scale campaign focused on increasing HIV testing among African American youth. The two successful case studies show that social marketing principles can be applied to a wide variety of topics among various population groups.

Biological false-positive venereal disease research laboratory test in cerebrospinal fluid in the diagnosis of neurosyphilis - a case-control study.

Science.gov (United States)

Zheng, S; Lin, R J; Chan, Y H; Ngan, C C L

2018-03-01

There is no clear consensus on the diagnosis of neurosyphilis. The Venereal Disease Research Laboratory (VDRL) test from cerebrospinal fluid (CSF) has traditionally been considered the gold standard for diagnosing neurosyphilis but is widely known to be insensitive. In this study, we compared the clinical and laboratory characteristics of true-positive VDRL-CSF cases with biological false-positive VDRL-CSF cases. We retrospectively identified cases of true and false-positive VDRL-CSF across a 3-year period received by the Immunology and Serology Laboratory, Singapore General Hospital. A biological false-positive VDRL-CSF is defined as a reactive VDRL-CSF with a non-reactive Treponema pallidum particle agglutination (TPPA)-CSF and/or negative Line Immuno Assay (LIA)-CSF IgG. A true-positive VDRL-CSF is a reactive VDRL-CSF with a concordant reactive TPPA-CSF and/or positive LIA-CSF IgG. During the study period, a total of 1254 specimens underwent VDRL-CSF examination. Amongst these, 60 specimens from 53 patients tested positive for VDRL-CSF. Of the 53 patients, 42 (79.2%) were true-positive cases and 11 (20.8%) were false-positive cases. In our setting, a positive non-treponemal serology has 97.6% sensitivity, 100% specificity, 100% positive predictive value and 91.7% negative predictive value for a true-positive VDRL-CSF based on our laboratory definition. HIV seropositivity was an independent predictor of a true-positive VDRL-CSF. Biological false-positive VDRL-CSF is common in a setting where patients are tested without first establishing a serological diagnosis of syphilis. Serological testing should be performed prior to CSF evaluation for neurosyphilis. © 2017 European Academy of Dermatology and Venereology.

Risk factors for KPC-producing Klebsiella pneumoniae: watch out for surgery.

Science.gov (United States)

da Silva, Kesia Esther; Maciel, Wirlaine Glauce; Sacchi, Flávia Patussi Correia; Carvalhaes, Cecilia Godoy; Rodrigues-Costa, Fernanda; da Silva, Ana Carolina Ramos; Croda, Mariana Garcia; Negrão, Fábio Juliano; Croda, Julio; Gales, Ana Cristina; Simionatto, Simone

2016-06-01

This study describes the molecular characteristics and risk factors associated with carbapenem-resistant Klebsiella pneumoniae strains. Risk factors associated with KPC-producing K. pneumoniae strains were investigated in this case-control study from May 2011 to May 2013. Bacterial identification was performed by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS). Antimicrobial susceptibility was determined by broth microdilution. Carbapenemase production was assessed by both modified Hodge test (MHT) and ertapenem hydrolysis using MALDI-TOF MS. The presence of β-lactamase-encoding genes was evaluated by PCR and DNA sequencing. Alterations in genes encoding K. pneumoniae outer membrane proteins were analysed by PCR and DNA sequencing as well as SDS-PAGE. Genetic relatedness among strains was determined by pulsed-field gel electrophoresis. This study included 94 patients. Longer hospitalisation, mechanical ventilation, catheters, and previous surgery were associated with KPC-producing K. pneumoniae. Sixty-eight strains showed resistance to carbapenems. Carbapenemase production was detected by MHT in 67 K. pneumoniae strains and by MALDI-TOF MS in 57. The presence of the blaKPC-2 gene was identified in 57 strains. The blaKPC-2 gene was not found in 11 carbapenem-resistant K. pneumoniae; instead, the blaCTX-M-1-like, blaCTX-M-2-like, blaCTX-M-8 like, blaCTX-M-14-like and blaSHV- like genes associated with OmpK35 and OmpK36 alterations were observed. Thirty-three KPC-producing K. pneumoniae strains were clonally related, and patients infected with these strains had a higher mortality rate (78.78 %). Our results show that KPC-producing K. pneumoniae was associated with several healthcare-related risk factors, including recent surgery.

Agribusiness and Contract Farming: the Case of Small-Scale Cucumber Producers in Mexico

Directory of Open Access Journals (Sweden)

Flavia Echánove Huacuja

2010-11-01

Full Text Available La agricultura por contrato constituye un mecanismo de abasto de las agroindustrias que se ha expandido rápidamente en los últimos años. Entre los factores que han motivado esta expansión se encuentran los cambios en el consumo alimentario, el crecimiento y fortalecimiento de las agroindustrias y otros distribuidores y la aplicación de políticas de ajuste estructural. El objetivo de este artículo es el análisis de las características del régimen contractual bajo el cual se produce cierta hortaliza de exportación ('el pepinillo', así como sus efectos en los productores, en los mercados de trabajo y tierras, y en el medio ambiente. Encontramos que el ingreso obtenido por los productores contratados no los ha exentado de la necesidad de diversificar sus actividades y que, en general, su situación como productores de bienes no-tradicionales es vulnerable y dependiente de los cambios en los mercados mundiales. English: Contract farming comprises an agribusiness supply mechanism that has undergone rapid expansion in recent years. Among the factors influencing that expansion are changes in consumption, the growth and strengthening of agribusinesses and other distributors, and the application of structural adjustment policies. The objective of this article is the analysis of the characteristics of the type of contract farming practiced with regard to the production of an export vegetable crop (pickling cucumbers, as well as its effects on producers, labor and land markets, and the environment. We find that the income obtained by contracted producers has not freed them from the necessity of diversifying their activities, and that in general, their situation as producers of non-traditional commodities is vulnerable and dependent upon the changing scenarios of global markets.

Test plan for qualification of the S-type fiberglass materials for use as the liquid observation well casing

International Nuclear Information System (INIS)

Parra, S.A.

1995-01-01

This test plan presents the guidelines and requirements for acceptance of the S-type fiberglass material for use as the liquid observation well casing material. The plan for evaluating the physical properties of the candidate fiberglass materials when subjected to radiation, corrosive chemicals, and high temperatures typically found in the waste tanks are outlined. The tests also include tube connection evaluations. Finally, the test plan identifies the participants, their responsibilities, and the schedule for completion of the work

Producing superhydrophobic roof tiles

International Nuclear Information System (INIS)

Carrascosa, Luis A M; Facio, Dario S; Mosquera, Maria J

2016-01-01

Superhydrophobic materials can find promising applications in the field of building. However, their application has been very limited because the synthesis routes involve tedious processes, preventing large-scale application. A second drawback is related to their short-term life under outdoor conditions. A simple and low-cost synthesis route for producing superhydrophobic surfaces on building materials is developed and their effectiveness and their durability on clay roof tiles are evaluated. Specifically, an organic–inorganic hybrid gel containing silica nanoparticles is produced. The nanoparticles create a densely packed coating on the roof tile surface in which air is trapped. This roughness produces a Cassie–Baxter regime, promoting superhydrophobicity. A surfactant, n-octylamine, was also added to the starting sol to catalyze the sol–gel process and to coarsen the pore structure of the gel network, preventing cracking. The application of ultrasound obviates the need to use volatile organic compounds in the synthesis, thereby making a ‘green’ product. It was also demonstrated that a co-condensation process effective between the organic and inorganic species is crucial to obtain durable and effective coatings. After an aging test, high hydrophobicity was maintained and water absorption was completely prevented for the roof tile samples under study. However, a transition from a Cassie–Baxter to a Wenzel state regime was observed as a consequence of the increase in the distance between the roughness pitches produced by the aging of the coating. (paper)

Assessment of the quality of test results from selected civil engineering material testing laboratories in Tanzania

CSIR Research Space (South Africa)

Mbawala, SJ

2017-12-01

Full Text Available Civil and geotechnical engineering material testing laboratories are expected to produce accurate and reliable test results. However, the ability of laboratories to produce accurate and reliable test results depends on many factors, among others...

Is there a role for a test controller in the development of new ATC equipment?

Science.gov (United States)

Westrum, Ron

1994-01-01

Earl Wiener points out that human factors problems fixed during the R & D stage are paid for once. When they are not fixed during R & D, they are then paid for every day. How users are involved in the R & D process to assist in developing equipment is a critical issue. Effective involvement can produce real improvements. Ineffective involvement can produce inefficient kludges or systems that are actually dangerous. The underlying problem is the management of information and ideas. To develop a really generative system a great deal would have to change in the way that the FAA innovates. Use of test controllers would solve only some of the problems. For instance, we have cockpit resource management now for pilots; we may have it soon for controllers. But the management of ideas in the innovation process also needs intellectual resource management. Simply involving users is not enough. Brought in at the wrong point in the development process, users can block or compromise innovation. User involvement must be carefully considered. A test controller may be one solution to this problem. It might be necessary to have several kinds of test controllers (en route versus TRACON, for instance). No doubt further problems would surface in getting test controllers into operation. I would recommend that the FAA engage in a series of case studies of controller involvement in the innovation process. A systematic comparison of effective and ineffective cases would do much to clarify what we ought to do in the future. Unfortunately, I have been unable to find any cases where test controllers have been used. Perhaps we need to create some, to see how they work.

Analysis of motorcycle exhaust regular testing data--a case study of Taipei City.

Science.gov (United States)

Chen, Yi-Chi; Chen, Lu-Yen; Jeng, Fu-Tien

2009-06-01

In Taiwan, a continuous increase in the number of motorcycles has made exhaust pollution one of the major emission sources of air pollutants. The regular testing program carried out by the Republic of China Environmental Protection Agency was designed to reduce air pollutant emissions by enhancing maintenance and repair. During the execution period, abundant testing results were accumulated to discuss pollutant emissions from motorcycles. Exhaust testing data of motorcycles in Taipei City from 1996 to 2005 were chosen as the basic data to survey changes in motorcycle exhaust. Effects of motorcycle age and mileage on exhaust pollution were studied. The introduction of advanced emission standards enhances the elimination of high-emitting motorcycles. The testing data indicate that the testing rate rose from approximately 50 to 70% and the failure rate changed from approximately 15 to 10%. The operation cycles of two-stroke motorcycles make them high-emitting vehicles. Concentrations of carbon monoxide and hydrocarbons are higher in two-stroke motorcycle exhaust than that in four-stroke motorcycles. In contrast, the concentration of carbon dioxide produced from complete oxidation processes is lower in exhaust from two-stroke motorcycles. Therefore, failure rates of two-stroke motorcycles are higher than those of four-stroke motorcycles and were also observed to deactivate more easily. On the basis of analytical results of testing data, we found that failure rates show a gradually increasing trend for motorcycles older than 3 yr or used for mileages greater than 10,000 km, and failure rates are highly correlated to the age/mileage of motorcycles. We reason that the accumulation of age or mileage means accumulating usage time of engines and emission control systems. Concentrations of pollutant emissions would increase because of engine wear and emission control system deactivation. After discussing changes of failure rates and pollutant emissions, some suggestions are

International travel is a risk factor for extended-spectrum β-lactamase-producing Enterobacteriaceae acquisition in children: A case-case-control study in an urban U.S. hospital.

Science.gov (United States)

Strysko, Jonathan P; Mony, Vidya; Cleveland, Jeremiah; Siddiqui, Hanna; Homel, Peter; Gagliardo, Christina

Extended-spectrum β-lactamase-producing Enterobacteriaceae (ESBL) infections are increasing in both adults and children. The aim of this study was to describe the epidemiology of children with ESBL in an ethnically-diverse population, to determine what proportion of these infections were community-onset, and to identify risk factors predisposing children to ESBL acquisition. A case-case-control study of children aged 0-18 years was conducted from 2012 to 2014. Patients with ESBL (detected via VITEK2) were matched 1:1:5 (based on age, sex, specimen source, and healthcare setting) with non-ESBL and uninfected controls. Data on prior antibiotic and healthcare exposure, international travel, prior urinary tract infection (UTI), comorbid gastrointestinal (GI), genitourinary (GU), neurologic, and immunocompromising conditions were collected and compared. Seventy-six patients were identified with 85 ESBL infections, of which 77 (91%) were E. coli. ESBL was isolated most frequently from urine (n = 72, 85%). Most infections were community-onset (n = 76, 89%) and were managed in the ambulatory setting (n = 47, 62%). On multivariate analysis, international travel (p study were community-onset. To our knowledge, this is the first description of international travel as a risk factor for ESBL acquisition in children in the United States. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sycamore produces viable seed after six years

Science.gov (United States)

A. F. Ike

1966-01-01

In the early stages of any tree improvement program it is desirable to know how soon progenies of selected parents can themselves be included in a breeding program. How soon will they produce viable pollen and seed? In the case of sycamore (Platanus occidentalis L.), the information is meager: the Woody- Plant Seed Manual lists the minimum commercial seedbearing age...

Critical wall shear stress for the EHEDG test method

DEFF Research Database (Denmark)

Jensen, Bo Boye Busk; Friis, Alan

2004-01-01

In order to simulate the results of practical cleaning tests on closed processing equipment, based on wall shear stress predicted by computational fluid dynamics, a critical wall shear stress is required for that particular cleaning method. This work presents investigations that provide a critical...... wall shear stress of 3 Pa for the standardised EHEDG cleaning test method. The cleaning tests were performed on a test disc placed in a radial flowcell assay. Turbulent flow conditions were generated and the corresponding wall shear stresses were predicted from CFD simulations. Combining wall shear...... stress predictions from a simulation using the low Re k-epsilon and one using the two-layer model of Norris and Reynolds were found to produce reliable predictions compared to empirical solutions for the ideal flow case. The comparison of wall shear stress curves predicted for the real RFC...

Avoidance behaviour testing of Eisenia andrei in biodegradable plastic environment

Directory of Open Access Journals (Sweden)

Zuzana Tichá

2013-01-01

Full Text Available Avoidance behaviour test with the earthworms (ISO 17512-1:2008 is a rapid screening test for the evaluation of soil and the influence of pollutants and chemicals on the behaviour of earthworms. The purpose of the testing is to determine the avoidance behaviour of earthworm (in this case Eisenia andrei was used which can be used as an organism for the composting and occur naturally in soil environment. The methodology was modified according to the needs of the avoidance behaviour testing of earthworms in biodegradable plastic environment. It is a biodegradable thermoplastic material Mater-Bi, which is produced from corn starch. Californian earthworm (Eisenia andrei was chosen as a test organism. The two-chamber test was used in testing. 10 earthworms were used, which were exposed to a number of concentrations of the test substance, which was mixed into the compost environment. It was recorded both a positive result, avoidance reaction, as well as a negative result, non-avoidance reaction and also there was a case, where individuals prefer both substrates equally. Organisms showed no escape reaction and were fairly evenly distributed in both halves of the test vessel, it can be assessed that organisms prefer both substrates equally. In testing, the mortality was zero, none of the individuals died, at the conclusion of the test there were not found any dead individuals. Avoidance higher than 80 % didn’t occur; it cannot be said that the substrate is toxic or degraded.

Testing the EKC hypothesis by considering trade openness, urbanization, and financial development: the case of Turkey.

Science.gov (United States)

Ozatac, Nesrin; Gokmenoglu, Korhan K; Taspinar, Nigar

2017-07-01

This study investigates the environmental Kuznets curve (EKC) hypothesis for the case of Turkey from 1960 to 2013 by considering energy consumption, trade, urbanization, and financial development variables. Although previous literature examines various aspects of the EKC hypothesis for the case of Turkey, our model augments the basic model with several covariates to develop a better understanding of the relationship among the variables and to refrain from omitted variable bias. The results of the bounds test and the error correction model under autoregressive distributed lag mechanism suggest long-run relationships among the variables as well as proof of the EKC and the scale effect in Turkey. A conditional Granger causality test reveals that there are causal relationships among the variables. Our findings can have policy implications including the imposition of a "polluter pays" mechanism, such as the implementation of a carbon tax for pollution trading, to raise the urban population's awareness about the importance of adopting renewable energy and to support clean, environmentally friendly technology.

Pricing Electricity in Pools With Wind Producers

DEFF Research Database (Denmark)

Morales González, Juan Miguel; Conejo, A. J.; Kai Liu

2012-01-01

This paper considers an electricity pool that includes a significant number of wind producers and is cleared through a network-constrained auction, one day in advance and on an hourly basis. The hourly auction is formulated as a two-stage stochastic programming problem, where the first stage...... represents the clearing of the market and the second stage models the system operation under a number of plausible wind production realizations. This formulation co-optimizes energy and reserve, and allows deriving both pool energy prices and balancing energy prices. These prices result in both cost recovery...... for producers and revenue reconciliation. A case study of realistic size is used to illustrate the functioning of the proposed pricing scheme....

Test case specifications for coupled neutronics-thermal hydraulics calculation of Gas-cooled Fast Reactor

Science.gov (United States)

Osuský, F.; Bahdanovich, R.; Farkas, G.; Haščík, J.; Tikhomirov, G. V.

2017-01-01

The paper is focused on development of the coupled neutronics-thermal hydraulics model for the Gas-cooled Fast Reactor. It is necessary to carefully investigate coupled calculations of new concepts to avoid recriticality scenarios, as it is not possible to ensure sub-critical state for a fast reactor core under core disruptive accident conditions. Above mentioned calculations are also very suitable for development of new passive or inherent safety systems that can mitigate the occurrence of the recriticality scenarios. In the paper, the most promising fuel material compositions together with a geometry model are described for the Gas-cooled fast reactor. Seven fuel pin and fuel assembly geometry is proposed as a test case for coupled calculation with three different enrichments of fissile material in the form of Pu-UC. The reflective boundary condition is used in radial directions of the test case and vacuum boundary condition is used in axial directions. During these condition, the nuclear system is in super-critical state and to achieve a stable state (which is numerical representation of operational conditions) it is necessary to decrease the reactivity of the system. The iteration scheme is proposed, where SCALE code system is used for collapsing of a macroscopic cross-section into few group representation as input for coupled code NESTLE.

Actinomycetes of Orthosipon stamineus rhizosphere as producer of antibacterial compound against multidrug resistant bacteria

Science.gov (United States)

Rante, H.; Yulianty, R.; Usmar; Djide, N.; Subehan; Burhamzah, R.; Prasad, M. B.

2017-11-01

The increasing case of antibiotic resistence has become an important problem to be faced in treating the infection diseases. The diversities of microbia, especially actinomycetes bacteria which originated from rizosphere soil of medicinal plant, has opened a chance for discovering the metabolites which can be used in solving the antibiotic resistant pathogenic bacteria problems. The aim of this research was to isolate the actinobacteria originated from medicinal plant rizosphere of Orthosipon stamineus as the producer of anti-multidrug resistances bacteria compounds. Three isolates of actinomycetes has been isolated from Orthosipon stamineus rhizosphere named KC3-1, KC3-2 and KC3-3. One isolate (KC3-3) showed big activity in inhibiting the test microbes by antagonistic test of actinomycetes isolates against Staphylococcus aureus and Eschericia coli antibiotic resistant bacteria. Furthermore, the KC3-3 isolate was fermented in Starch Nitrate Broth (SNB) medium for 14 days. The supernatant and the biomass of the fermentation yield were separated. The supernatant were extracted using ethyl acetate as the solvent and the biomass were extracted using methanol. The antibacterial activity test of ethyl acetate and methanol extract revealed that the extracts can inhibit the bacteria test up to 5% concentration. The ethyl acetate and methanol extracts can inhibit the bacteria test up to 5% concentration.

Case Study Approaches for Implementing the 2007 NRC Report “Toxicity Testing in the 21st Century: A Vision and A Strategy”

Science.gov (United States)

Andersen, Melvin E.; Clewell, Harvey J.; Carmichael, Paul L.; Boekelheide, Kim

2013-01-01

The 2007 report “Toxicity Testing in the 21st Century: A Vision and A Strategy” argued for a change in toxicity testing for environmental agents and discussed federal funding mechanisms that could be used to support this transformation within the USA. The new approach would test for in vitro perturbations of toxicity pathways using human cells with high throughput testing platforms. The NRC report proposed a deliberate timeline, spanning about 20 years, to implement a wholesale replacement of current in-life toxicity test approaches focused on apical responses with in vitro assays. One approach to accelerating implementation is to focus on well-studied prototype compounds with known toxicity pathway targets. Through a series of carefully executed case studies with four or five pathway prototypes, the various steps required for implementation of an in vitro toxicity pathway approach to risk assessment could be developed and refined. In this article, we discuss alternative approaches for implementation and also outline advantages of a case study approach and the manner in which the cases studies could be pursued using current methodologies. A case study approach would be complementary to recently proposed efforts to map the human toxome, while representing a significant extension toward more formal risk assessment compared to the profiling and prioritization approaches offered by programs such as the EPA’s ToxCast effort. PMID:21993955

Precipitation of metals in produced water : influence on contaminant transport and toxicity

International Nuclear Information System (INIS)

Azetsu-Scott, K.; Wohlgeschaffen, G.; Yeats, P.; Dalziel, J.; Niven, S.; Lee, K.

2006-01-01

Produced water contains a number of compounds of environmental concern and is the largest volume waste stream from oil and gas production activities. Recent studies have shown that chemicals dissolved in waste water from oil platforms stunted the growth of North Sea cod and affected their breeding patterns. Scientific research is needed to identify the impact of produced water discharges on the environment as well as to identify acceptable disposal limits for produced water. This presentation provided details of a study to characterize produced water discharged within the Atlantic regions of Canada. The study included dose response biological effect studies; research on processes controlling the transport and transformation of contaminants associated with produced water discharges and the development of risk assessment models. The sample location for the study was a site near Sable Island off the coast of Nova Scotia. Chemical analysis of the produced water was conducted as well as toxicity tests. Other tests included a time-series particulate matter sedimentation test; time-series metal and toxicity analysis; time-series change in metal precipitates tests and a produced water/seawater layering experiment. Dissolved and particulate fractions were presented, and the relationship between toxicity and particulate concentrations was examined. Results of the study suggested that produced water contaminants are variable over spatial and temporal scales due to source variations and changes in discharge rates. Chemical changes occur within 24 hours of produced water being mixed with seawater and facilitate contaminant partitioning between the surface micro layer, water column and sediments. Changes in the toxicity of the produced water are correlated with the partitioning of chemical components. The impact zone may be influenced by chemical kinetics that control the distribution of potential toxic metals. Further research is needed to investigate the effects of low level

[Partial thyroxine binding globulin deficiency in test tube infants: report of cases and literature review].

Science.gov (United States)

Fang, Y L; Wang, C L; Liang, L

2016-06-02

To investigate the clinical characteristics of twins with thyroxine binding globulin (TBG) deficiency and to find SERPINA7 gene mutations. Data(2015) related to clinical characteristics, serum biochemistry, gene mutations and pedigree of two children with TBG deficiency were collected in the First Affiliated Hospital of College of Medicine, Zhejiang University. The related literature was searched form China National Knowledge Infrastructure, Wanfang Data Knowledge Service Platform, National Center for Biotechnology Information and PubMed (up to December 2015) by using search terms "Thyroxine binding globulin deficiency, gene, mutation" . Both patients were diagnosed as central hypothyroidism at the beginning and treated with L-thyroxine. Both of the identical twins of the triplet were observed for mutation in exon3, c. 631G﹥A(p.A211T), a new mutation had not been reported, but their parents and another non-identical triplet brother were normal. Literature review showed that 23 foreign cases with SERPINA7 gene mutation had been reported, however, no Chinese with SERPINA7 gene mutation had been reported. Among reported cases it was shown that SERPINA7 gene mutations located in exon, intron, promoter and enhancer. Up to now, 49 variants had been identified, 41 of them located in the mutated genes. Including these two cases, patients with thyroxine binding globulin deficiency were characterized by reduced serum TH levels, but normal free TH and TSH and absence of clinical manifestations. The new mutation of SERPINA7 gene c. 631G﹥A(p.A211T)is not transmitted via the known X chromosome linked heredity, and as the cases were test tube triplet infants, it is a de novo mutation. The serum thyroid function tests of TBG deficiency showed decreased TT4, TT3 and normal TSH and TBG deficiency is often misdiagnosed as central hypothyroidism.