WorldWideScience

Sample records for tertiary recovery methods

  1. Tertiary recovery and tritide injection equipment

    International Nuclear Information System (INIS)

    Li Lin

    1989-01-01

    The exploitation of an oil field is a continously developing process, undergoing seveal stages, such as the low production, the high production, the stable production and the decline. The tertiary recovery is an important means of the enhanced oil recovery. Since the object of the tertiary recovery is to treat the oil in micropores which is difficult to be produced, it is more necessary to know further the reservoir. Tritide can be used as a tracer and is an ideal marker of knowing the reservoir and the state of the fluid movement. The paper presents the tritide injection equipment

  2. Increased oil recovery: secondary and tertiary. Application and future prospect

    Energy Technology Data Exchange (ETDEWEB)

    Whiting, R L

    1978-01-01

    Oil is initially produced using the nature reservoir pressure present, in a process called primary oil recovery. Secondary recovery uses artificial means to increase the natural reservoir pressure; tertiary, or enhanced oil recovery, uses a number of methods to enhance the flow characteristics of the oil. The scope for such techniques to increase the yield from oil fields in the US is estimated; the practicality of their application is shown to be particularly dependent upon pricing, taxation, and other existing policies. 16 references.

  3. Tertiary climatic fluctuations and methods of analysis of tertiary floras

    Science.gov (United States)

    Wolfe, J.A.

    1971-01-01

    On theoretical grounds, an analysis of the physiognomy of a Tertiary leaf assemblage is more direct and reliable than a circuitous floristic analysis in assigning thermal regimes to fossil assemblages. Using primarily foliar physiognomy and secondarily floristic composition, it can be shown that: (1) some middle latitude Tertiary assemblages probably lived under meteoroligically tropical climates; (2) a major and rapid climatic deterioration occurred in the Oligocene; and (3) a major climatic fluctuation probably occurred in the Late Eocene. These analyses thus substantiate the conclusions of several other paleobotanists regarding climatic fluctuations. Recent criticisms of these analyses are shown to be invalid and to be based largely on misinterpretations. ?? 1971.

  4. [Relationship between occupational stress, recovery experience, and physiological health of nurses in a municipal grade A tertiary hospital].

    Science.gov (United States)

    He, L; Zhang, C L; Yang, T; Lan, Y J

    2017-06-20

    Objective: To examine the relationship between recovery experience, occupational stress, and physiological health of nurses in a municipal grade A tertiary hospital. Methods: A total of 296 in-service nurses from 7 municipal grade A tertiary hospitals were selected from October 2015 to February 2016. Individual characteristics of the subjects were collected using a self-made questionnaire. The recovery experience, occupational stress, and physiological health of the subjects were assessed based on the physiological health dimensions in the Chinese version of Recovery Experience Questionnaire (REQ-C) , Job Content Questionnaire (JCQ) , and Quality of Work Life (QWL7-32) . Results: The mean recovery experience score of nurses from the municipal grade A tertiary hospital was 45.04±7.72, and 51.35% of the nurses had satisfactory recovery experience. Occupational stress was identified in 81.76% of the nurses. Based on the four categories of occupational stress, 65 nurses were identified with high-strain jobs (21.95%) , 56 with relaxed (low-strain) jobs (18.92%) , 49 with passive jobs (16.55%) , and 126 with active jobs (42.57%) . In addition, the mean physiological health score of the nurses was 21.20±4.24. Physiological health was negatively correlated with occupational stress ( r =-0.173, P stress ( r =-0.116, P stress, where subjects with high-demand active jobs had the poorest recovery experience ( F =2.610, P stress of nurses, where increased job demand can lead to stronger stress response, reduced recovery experience, and poorer physiological health.

  5. Magnesium fluoride recovery method

    International Nuclear Information System (INIS)

    Gay, R.L.; McKenzie, D.E.

    1989-01-01

    A method of obtaining magnesium fluoride substantially free from radioactive uranium from a slag formed in the production of metallic uranium by the reduction of depleted uranium tetrafluoride with metallic magnesium in a retort wherein the slag contains the free metals magnesium and uranium and also oxides and fluorides of the metals. The slag having a radioactivity level of at least about 7,000 rhoCi/gm. The method comprises the steps of: grinding the slag to a median particle size of about 200 microns; contacting the ground slag in a reaction zone with an acid having a strength of from about 0.5 to 1.5 N for a time of from about 4 to about 20 hours in the presence of a catalytic amount of iron; removing the liquid product; treating the particulate solid product; repeating the last two steps at least one more time to produce a solid residue consisting essentially of magnesium fluoride substantially free of uranium and having a residual radioactivity level of less than about 1000 rhoCi/gm

  6. Evaluation of effects of phenol recovery on biooxidation and tertiary treatment of SRC-I wastewater. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, J.W.; Watt, J.C.; Cowan, W.F.; Schuyler, S.E.

    1983-09-01

    Addition of phenol recovery to the wastewater treatment scheme in the Baseline Design for the SRC-I Demonstration Plant was evaluated as a major post-Baseline effort. Phenol recovery affects many downstream processes, but this study was designed to assess primarily its effects on biooxidation and subsequent tertiary treatment. Two parallel treatment schemes were set up, one to treat dephenolated wastewaters and the other for processed nondephenolated wastewaters, a simulation of the Baseline Design. The study focused on comparisons of five areas: effluent quality; system stability; the need for continuous, high-dose powdered activated carbon (PAC) augmentation to the bioreactor; minimum bioreactor hydraulic residence time (HRT); and tertiary treatment requirements. The results show that phenol recovery improves the quality of the bioreactor effluent in terms of residual organics and color. With phenol recovery, PAC augmentation is not required; without phenol recovery, PAC is needed to produce a comparable effluent. Dephenolization also enhances the stability of biooxidation, and reduces the minimum HRT required. With tertiary treatment, both schemes can meet the effluent concentrations published in the SRC-I Final Envivornmental Impact Statement, as well as the anticipated effluent limits. However, phenol recovery does provide a wider safety margin and could eliminate the need for some of the tertiary treatment steps. Based solely on the technical merits observed in this study, phenol recovery is recommended. The final selection should, however, also consider economic tradeoffs and results of other studies such as toxicology testing of the effluents. 34 references, 30 figures and 26 tables.

  7. Job characteristics, work-nonwork interference and the role of recovery strategies amongst employees in a tertiary institution

    Directory of Open Access Journals (Sweden)

    Jani Oosthuizen

    2011-11-01

    Full Text Available Orientation: Although work characteristics and recovery strategies are associated with work- family interference, the influence on specific types of work-nonwork interference (W-NWI has not been investigated. Research purpose: The aim of this study was to investigate the impact of work characteristics and recovery strategies on four types of W-NWI. Motivation for the study: It is clear from the literature that job characteristics and W-NWI have adverse effects on employees’ health and well-being. It is therefore important to identify work characteristics and recovery strategies associated with W-NWI. Research design, approach and method: A cross-sectional survey design was used in this study. The target population was married employees with children working at a Tertiary Education Institution (TEI in the North West Province (N = 366. Main findings: Work pressure and emotional demands significantly predicted all the work-nonwork role interference dimensions. A lack of autonomy predicted work-parent interference and work-religion and/or spirituality interference, whilst a lack of development possibilities predicted work-religion and/or spirituality interference. Relaxation and mastery recovery experiences significantly predicted lower work-parent interference. A lack of psychological detachment and relaxation were significantly associated with lower work- spouse interference. Relaxation and control significantly predicted lower work-domestic interference, whilst psychological detachment significantly predicted lower work-religion and/or spirituality interference. Practical/managerial implications: The results give managers insight into the specific work characteristics and recovery experiences that play a role in W-NWI, upon which interventions can be based to address these issues. Contribution/value-add: This study provides information on the relationship between work characteristics, recovery experiences and the effect on different types of W-NWI.

  8. Nanofluid of graphene-based amphiphilic Janus nanosheets for tertiary or enhanced oil recovery: High performance at low concentration.

    Science.gov (United States)

    Luo, Dan; Wang, Feng; Zhu, Jingyi; Cao, Feng; Liu, Yuan; Li, Xiaogang; Willson, Richard C; Yang, Zhaozhong; Chu, Ching-Wu; Ren, Zhifeng

    2016-07-12

    The current simple nanofluid flooding method for tertiary or enhanced oil recovery is inefficient, especially when used with low nanoparticle concentration. We have designed and produced a nanofluid of graphene-based amphiphilic nanosheets that is very effective at low concentration. Our nanosheets spontaneously approached the oil-water interface and reduced the interfacial tension in a saline environment (4 wt % NaCl and 1 wt % CaCl2), regardless of the solid surface wettability. A climbing film appeared and grew at moderate hydrodynamic condition to encapsulate the oil phase. With strong hydrodynamic power input, a solid-like interfacial film formed and was able to return to its original form even after being seriously disturbed. The film rapidly separated oil and water phases for slug-like oil displacement. The unique behavior of our nanosheet nanofluid tripled the best performance of conventional nanofluid flooding methods under similar conditions.

  9. Increasing Recovery of Nontuberculous Mycobacteria from Respiratory Specimens over a 10-Year Period in a Tertiary Referral Hospital in South Korea

    OpenAIRE

    Koh, Won-Jung; Chang, Boksoon; Jeong, Byeong-Ho; Jeon, Kyeongman; Kim, Su-Young; Lee, Nam Yong; Ki, Chang-Seok; Kwon, O Jung

    2013-01-01

    Background The number of patients with pulmonary disease caused by nontuberculous mycobacteria (NTM) has been increasing worldwide. The aim of this study was to evaluate long-term trends in the NTM recovery rate from respiratory specimens over a 10-year period in a tertiary referral hospital in South Korea. Methods We retrospectively reviewed the records of mycobacterial cultures of respiratory specimens at Samsung Medical Center from January 2001 to December 2011. Results During the study pe...

  10. Method for enhanced oil recovery

    Science.gov (United States)

    Comberiati, Joseph R.; Locke, Charles D.; Kamath, Krishna I.

    1980-01-01

    The present invention is directed to an improved method for enhanced recovery of oil from relatively "cold" reservoirs by carbon dioxide flooding. In oil reservoirs at a temperature less than the critical temperature of 87.7.degree. F. and at a pore pressure greater than the saturation pressure of carbon dioxide at the temperature of the reservoir, the carbon dioxide remains in the liquid state which does not satisfactorily mix with the oil. However, applicants have found that carbon dioxide can be vaporized in situ in the reservoir by selectively reducing the pore pressure in the reservoir to a value less than the particular saturated vapor pressure so as to greatly enhance the mixing of the carbon dioxide with the oil.

  11. Tenth oil recovery conference

    International Nuclear Information System (INIS)

    Sleeper, R.

    1993-01-01

    The Tertiary Oil Recovery Project is sponsored by the State of Kansas to introduce Kansas producers to the economic potential of enhanced recovery methods for Kansas fields. Specific objectives include estimation of the state-wide tertiary oil resource, identification and evaluation of the most applicable processes, dissemination of technical information to producers, occasional collaboration on recovery projects, laboratory studies on Kansas applicable processes, and training of students and operators in tertiary oil recovery methods. Papers have been processed separately for inclusion on the data base

  12. Method for the recovery of a material

    International Nuclear Information System (INIS)

    Spence, A.P.

    1978-01-01

    The present invention relates to an improved method for the solution mining of a mineral from a subterranean formation. More specifically, the invention relates to an improved method which enhances significantly the recovery of the mineral from a subterranean formation via solution mining. The improvement comprises switching a well which initially functions as a producer to an injector and vice versa after oxidant breakthrough has occurred at a production well

  13. Recovery of uranium and lanthanides during the production of nitrophosphate fertilizers using tertiary amyl alcohol

    Energy Technology Data Exchange (ETDEWEB)

    Habashi, F; Awadalla, F T

    1986-01-01

    When phosphate rock is dissolved in nitric acid, phosphoric acid and uranium can be selectively extracted by tertiary amyl alcohol; other impurities including the lanthanides remain in the aqueous phase. Uranium can be recovered from the alcohol phase by selective stripping and the lanthanides from the raffinate by extraction with tributyl phosphate.

  14. Aminosilicone solvent recovery methods and systems

    Science.gov (United States)

    Spiry, Irina Pavlovna; Perry, Robert James; Wood, Benjamin Rue; Singh, Surinder Prabhjot; Farnum, Rachel Lizabeth; Genovese, Sarah Elizabeth

    2018-02-13

    The present invention is directed to aminosilicone solvent recovery methods and systems. The methods and systems disclosed herein may be used to recover aminosilicone solvent from a carbon dioxide containing vapor stream, for example, a vapor stream that leaves an aminosilicone solvent desorber apparatus. The methods and systems of the invention utilize a first condensation process at a temperature from about 80.degree. C. to about 150.degree. C. and a second condensation process at a temperature from about 5.degree. C. to about 75.degree. C. The first condensation process yields recovered aminosilicone solvent. The second condensation process yields water.

  15. Method for hydrometallurgical recovery of selected metals

    International Nuclear Information System (INIS)

    Lorenz, G.; Schaefer, B.; Balzat, W.

    1988-01-01

    The method for hydrometallurgical recovery of selected metals refers to ore dressing by means of milling and alkaline leaching of metals, preferably uranium. By adding CaO during wet milling, Na + or K + ions of clayey ores are replaced by Ca 2+ ions. Due to the ion exchange processes, the uranium bonded with clays becomes more accessible to the leaching solution. The uranium yield increases and the consumption of reagents decreases

  16. Method for the secondary recovery of petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Roth, H H

    1966-10-11

    A method for the secondary recovery of petroleum from subterranean formations consists of flooding these formations with aqueous fluids. These aqueous fluids contain one or more saline solutes which are either present before the flooding or which are dissolved from the formation during flooding. These fluids contain, as a thickening agent, a substantially linear, high molecular weight, water-soluble alkenylaromatic polymer which has sulfonic acid or sulfonate groups on the aromatic nuclei. This saline solute and polymer are mutually compatible. (5 claims)

  17. RPC gas recovery by open loop method

    International Nuclear Information System (INIS)

    Joshi, Avinash

    2009-01-01

    RPC detectors require to be flushed with small but continuous flow of gas mixture. Dealing with large number of detectors, gas consumption to very large volumes. Gas flow is a running expense and constituent gases are too expensive to be treated as consumables. Exhaust gas mixture from detectors is a potential environmental hazard if discharged directly into the atmosphere. Storage of gases on a large scale also leads to inventory- and safety-related problems. A solution to these problems is the recovery and reuse of exhaust gas mixture from RPC detectors. Close loop method employs recirculation of exhausted gas mixture after purification, analysis and addition of top-up quantities. In open loop method, under consideration here, individual component gases are separated from gas mixture and reused as source. During open loop process, gases liquefiable at low pressures are separated from ones liquefiable at high pressure. The gas phase components within each group are successively separated by either fractional condensation or gravity separation. Gas mixture coming from RPC exhaust is first desiccated by passage through molecular sieve adsorbent type (3A+4A). Subsequent scrubbing over basic activated alumina removes toxic and acidic contaminants such as S 2 F 10 produced during corona (arcing) discharge. In the first stage of separation isobutane and freon are concentrated by diffusion and liquefied by fractional condensation by cooling upto -30 deg. C. Liquefied gases are returned to source tanks. In the second stage of separation, argon and sulphur hexafluoride, the residual gases, are concentrated by settling due to density difference. SF 6 is stored for recovery by condensation at high pressure while argon is further purified by thermal cracking of crossover impurities at 1000 deg. C followed by wet scrubbing.

  18. RPC gas recovery by open loop method

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Avinash [Alpha Pneumatics, 11, Krishna Kutir, Madanlal Dhigra Road, Panch Pakhadi (India)], E-mail: alpha_pneumatics@hotmail.com

    2009-05-01

    RPC detectors require to be flushed with small but continuous flow of gas mixture. Dealing with large number of detectors, gas consumption to very large volumes. Gas flow is a running expense and constituent gases are too expensive to be treated as consumables. Exhaust gas mixture from detectors is a potential environmental hazard if discharged directly into the atmosphere. Storage of gases on a large scale also leads to inventory- and safety-related problems. A solution to these problems is the recovery and reuse of exhaust gas mixture from RPC detectors. Close loop method employs recirculation of exhausted gas mixture after purification, analysis and addition of top-up quantities. In open loop method, under consideration here, individual component gases are separated from gas mixture and reused as source. During open loop process, gases liquefiable at low pressures are separated from ones liquefiable at high pressure. The gas phase components within each group are successively separated by either fractional condensation or gravity separation. Gas mixture coming from RPC exhaust is first desiccated by passage through molecular sieve adsorbent type (3A+4A). Subsequent scrubbing over basic activated alumina removes toxic and acidic contaminants such as S{sub 2}F{sub 10} produced during corona (arcing) discharge. In the first stage of separation isobutane and freon are concentrated by diffusion and liquefied by fractional condensation by cooling upto -30 deg. C. Liquefied gases are returned to source tanks. In the second stage of separation, argon and sulphur hexafluoride, the residual gases, are concentrated by settling due to density difference. SF{sub 6} is stored for recovery by condensation at high pressure while argon is further purified by thermal cracking of crossover impurities at 1000 deg. C followed by wet scrubbing.

  19. Assessing Education Needs at Tertiary Level: The Focus Group Method

    Directory of Open Access Journals (Sweden)

    Elena-Mirela Samfira

    2015-10-01

    Full Text Available The goal of the paper is to point out the advantages and disadvantages of the focus group method in assessing the education needs of teachers and students in veterinary medicine. It is the first stage of a wider research aiming at developing problem-based teaching and learning methodologies in the field of veterinary medicine. The materials used consisted of literature documents on focus group as a research method in social sciences. The authors studied the literature available in the field and synthesised its main advantages and disadvantages. The paper is the first of this kind in Romania. Results show that there is no agreement yet on the advantages and disadvantages of this method. The research limitation is that there is almost no Romanian literature on focus group as a method. The usefulness of the paper is obvious: it allows other researchers in the field of education see the benefits of using such a research method. The originality of the paper consists in the fact that there has been no such research so far in Romanian higher education. Based on the results of the focus groups organised, the authors will design and implement a problem-based learning methodology for the students in veterinary medicine.

  20. Applying rigorous decision analysis methodology to optimization of a tertiary recovery project

    International Nuclear Information System (INIS)

    Wackowski, R.K.; Stevens, C.E.; Masoner, L.O.; Attanucci, V.; Larson, J.L.; Aslesen, K.S.

    1992-01-01

    This paper reports that the intent of this study was to rigorously look at all of the possible expansion, investment, operational, and CO 2 purchase/recompression scenarios (over 2500) to yield a strategy that would maximize net present value of the CO 2 project at the Rangely Weber Sand Unit. Traditional methods of project management, which involve analyzing large numbers of single case economic evaluations, was found to be too cumbersome and inaccurate for an analysis of this scope. The decision analysis methodology utilized a statistical approach which resulted in a range of economic outcomes. Advantages of the decision analysis methodology included: a more organized approach to classification of decisions and uncertainties; a clear sensitivity method to identify the key uncertainties; an application of probabilistic analysis through the decision tree; and a comprehensive display of the range of possible outcomes for communication to decision makers. This range made it possible to consider the upside and downside potential of the options and to weight these against the Unit's strategies. Savings in time and manpower required to complete the study were also realized

  1. Methods of tritium recovery from molten lithium

    International Nuclear Information System (INIS)

    Farookhi, R.; Rogers, J.E.

    1968-01-01

    It is important to keep the tritium inventory in a blanket of a thermonuclear reactor at a low level both to eliminate possible hydriding of structural components and to reduce inventory cost. Removing the tritium from a lithium blanket by fractional distillation, flash vaporization, and fractional crystallization was investigated. No definitive data are available either on the vapor-liquid equilibrium between lithium and tritium at low T 2 concentrations, or on the rate of formation and decomposition of lithium tritide. The final distinction between the recovery systems discussed in this report will depend on such data, but presently distillation appears to be the best alternate to the diffusion scheme proposed by A.P. Fraas. The capital cost of equipment necessary to remove tritium by distillation appears to be greater than 10 million dollars for a 5000 MW system, whereas the capital cost associated with the diffusion process has been estimated to be 4 million dollars

  2. Wastewater heat recovery method and apparatus

    Science.gov (United States)

    Kronberg, J.W.

    1991-01-01

    This invention is comprised of a heat recovery system with a heat exchanger and a mixing valve. A drain trap includes a heat exchanger with an inner coiled tube, baffle plate, wastewater inlet, wastewater outlet, cold water inlet, and preheated water outlet. Wastewater enters the drain trap through the wastewater inlet, is slowed and spread by the baffle plate, and passes downward to the wastewater outlet. Cold water enters the inner tube through the cold water inlet and flows generally upward, taking on heat from the wastewater. This preheated water is fed to the mixing valve, which includes a flexible yoke to which are attached an adjustable steel rod, two stationary zinc rods, and a pivoting arm. The free end of the arm forms a pad which rests against a valve seat. The rods and pivoting arm expand or contract as the temperature of the incoming preheated water changes. The zinc rods expand more than the steel rod, flexing the yoke and rotating the pivoting arm. The pad moves towards the valve seat as the temperature of the preheated water rises, and away as the temperature falls, admitting a variable amount of hot water to maintain a nearly constant average process water temperature.

  3. METHOD FOR THE RECOVERY OF CESIUM VALUES

    Science.gov (United States)

    Rimshaw, S.J.

    1960-02-16

    A method is given for recovering Cs/sup 137/ from radioactive waste solutions together with extraneous impurities. Ammonium alum is precipitated in the waste solution. The alum, which carries the cesium, is separated from the supernatant liquid and then dissolved in water. The resulting aqueous solution is then provided with a source of hydroxyl ions, which precipitates aluminum as the hydroxide, and the aluminum hydroxide is separated from the resulting liquid. This liquid, which contains anionic impurities together with ammonium and cesium, is passed through an anion exchange resin bed which removes the anionic impurities. The ammonium in the effluent is removed by destructive distiilation, leaving a substantiaily pure cesium salt in the effluent.

  4. Creep compliance and percent recovery of Oklahoma certified binder using the multiple stress recovery (MSCR) method.

    Science.gov (United States)

    2015-04-01

    A laboratory study was conducted to develop guidelines for the Multiple Stress Creep Recovery : (MSCR) test method for local conditions prevailing in Oklahoma. The study consisted of : commonly used binders in Oklahoma, namely PG 64-22, PG 70-28, and...

  5. Increasing Recovery of Nontuberculous Mycobacteria from Respiratory Specimens over a 10-Year Period in a Tertiary Referral Hospital in South Korea.

    Science.gov (United States)

    Koh, Won-Jung; Chang, Boksoon; Jeong, Byeong-Ho; Jeon, Kyeongman; Kim, Su-Young; Lee, Nam Yong; Ki, Chang-Seok; Kwon, O Jung

    2013-11-01

    The number of patients with pulmonary disease caused by nontuberculous mycobacteria (NTM) has been increasing worldwide. The aim of this study was to evaluate long-term trends in the NTM recovery rate from respiratory specimens over a 10-year period in a tertiary referral hospital in South Korea. We retrospectively reviewed the records of mycobacterial cultures of respiratory specimens at Samsung Medical Center from January 2001 to December 2011. During the study period, 32,841 respiratory specimens from 10,563 patients were found to be culture-positive for mycobacteria. These included 12,619 (38%) Mycobacterium tuberculosis and 20,222 (62%) NTM isolates. The proportion of NTM among all positive mycobacterial cultures increased from 43% (548/1,283) in 2001 to 70% (3,341/4,800) in 2011 (ptrend). The recovery rate of NTM isolates from acid-fast bacilli smear-positive specimens increased from 9% (38/417) in 2001 to 64% (1,284/1,997) in 2011 (ptrend). The proportion of positive liquid cultures was higher for NTM than for M. tuberculosis (p<0.001). The most frequently isolated NTM were Mycobacterium avium-intracellulare complex (53%) and Mycobacterium abscessus-massiliense complex (25%). The recovery rate of NTM from respiratory specimens in South Korea has increased steadily.

  6. Methods to maximise recovery of environmental DNA from water samples.

    Directory of Open Access Journals (Sweden)

    Rheyda Hinlo

    Full Text Available The environmental DNA (eDNA method is a detection technique that is rapidly gaining credibility as a sensitive tool useful in the surveillance and monitoring of invasive and threatened species. Because eDNA analysis often deals with small quantities of short and degraded DNA fragments, methods that maximize eDNA recovery are required to increase detectability. In this study, we performed experiments at different stages of the eDNA analysis to show which combinations of methods give the best recovery rate for eDNA. Using Oriental weatherloach (Misgurnus anguillicaudatus as a study species, we show that various combinations of DNA capture, preservation and extraction methods can significantly affect DNA yield. Filtration using cellulose nitrate filter paper preserved in ethanol or stored in a -20°C freezer and extracted with the Qiagen DNeasy kit outperformed other combinations in terms of cost and efficiency of DNA recovery. Our results support the recommendation to filter water samples within 24hours but if this is not possible, our results suggest that refrigeration may be a better option than freezing for short-term storage (i.e., 3-5 days. This information is useful in designing eDNA detection of low-density invasive or threatened species, where small variations in DNA recovery can signify the difference between detection success or failure.

  7. Analytic Method for Pressure Recovery in Truncated Diffusers ...

    African Journals Online (AJOL)

    A prediction method is presented for the static pressure recovery in subsonic axisymmetric truncated conical diffusers. In the analysis, a turbulent boundary layer is assumed at the diffuser inlet and a potential core exists throughout the flow. When flow separation occurs, this approach cannot be used to predict the maximum ...

  8. Data warehousing methods and processing infrastructure for brain recovery research.

    Science.gov (United States)

    Gee, T; Kenny, S; Price, C J; Seghier, M L; Small, S L; Leff, A P; Pacurar, A; Strother, S C

    2010-09-01

    In order to accelerate translational neuroscience with the goal of improving clinical care it has become important to support rapid accumulation and analysis of large, heterogeneous neuroimaging samples and their metadata from both normal control and patient groups. We propose a multi-centre, multinational approach to accelerate the data mining of large samples and facilitate data-led clinical translation of neuroimaging results in stroke. Such data-driven approaches are likely to have an early impact on clinically relevant brain recovery while we simultaneously pursue the much more challenging model-based approaches that depend on a deep understanding of the complex neural circuitry and physiological processes that support brain function and recovery. We present a brief overview of three (potentially converging) approaches to neuroimaging data warehousing and processing that aim to support these diverse methods for facilitating prediction of cognitive and behavioral recovery after stroke, or other types of brain injury or disease.

  9. Recovery process of elite athletes: A review of contemporary methods

    Directory of Open Access Journals (Sweden)

    Veljović Draško

    2012-01-01

    Full Text Available A numerous training stimulus and competition as well can reduce level of abilities among athletes. This decline of performance can be a temporary phenomenon, with duration of several minutes or several hours after a workout, or take much longer, even a several days. The lack of adequate recovery process can influence on athletes not being able to train at the desired intensity or do not fully meet the tasks at the next training session. Chronic fatigue can lead to injuries, and therefore, full recovery is necessary for achieving optimal level of abilities that will ensure a better athletic performance. For this reasons, athletes often carry out a variety of techniques and methods aimed to recover after training or match. They have become a part of the training process and their purpose is reduction of stress and fatigue incurred as a result of daily exposure to intense training stimulus. There are numerous methods and techniques today that can accelerate the recovery process of athletes. For this reason it is necessary to know the efficiency of an adequate method which will be applied in the training process. The aim of this review article is to point to those currently used and their effects on the process of recovery after physical activity in elite sport.

  10. Industrial development of a simulation method for ore recovery evaluation

    International Nuclear Information System (INIS)

    Deraisme; De Fouquet; Fraisse

    1983-01-01

    The purpose of downstream geostatistics is to provide to engineers, responsible for mining project studies, with a method for predicting the ore reserve recovery coming from different mining methods and for choosing the best one according to economic criteria. In the case of the BEN LOMOND uranium deposit, the metal recovery at the production stage depends on the geometry of mineralized lenses. For the first step of this study the usual technique for constructing a numerical model of deposit has been used. But this does not reproduce the geological structures very precisely. The recovered reserves have been computed for three more or less selective mining methods. This has been done inputing the outlines of stopes on a digitalizer. In the case of a cut and fill method an automatic algorithm for the optimization under constraints has been developed [fr

  11. Recovery and its correlates among patients with bipolar disorder: A study from a tertiary care centre in North India.

    Science.gov (United States)

    Grover, Sandeep; Hazari, Nandita; Aneja, Jitender; Chakrabarti, Subho; Sharma, Sunil; Avasthi, Ajit

    2016-12-01

    The goal of treatment in mental illness has evolved from a symptom-based approach to a personal recovery-based approach. The aim of this study was to evaluate the predictors of personal recovery among patients with bipolar disorder. A total of 185 patients with bipolar disorder, currently in remission, were evaluated on Recovery Assessment Scale (RAS), Internalized Stigma of Mental Illness Scale (ISMIS), Brief Religious coping scale (RCOPE), Duke University Religiosity Index (DUREL), Religiousness Measures Scale, Hamilton depression rating scale (HDRS), Young Mania rating scale (YMRS) and Global Assessment of Functioning (GAF) scale. The mean age of the sample was 40.5 (standard deviation (SD), 11.26) years. Majority of the participants were male, married, working, Hindu by religion and belonged to extended/joint families of urban background. In the regression analysis, RAS scores were predicted significantly by discrimination experience, stereotype endorsement and alienation domains of ISMIS, level of functioning as assessed by GAF, residual depressive symptoms as assessed by HDRS and occupational status. The level of variance explained for total RAS score and various RAS domains ranged from 36.2% to 46.9%. This study suggests that personal recovery among patients with bipolar disorder is affected by stigma, level of functioning, residual depressive symptoms and employment status of patients with bipolar disorder. © The Author(s) 2016.

  12. Increased Oil Production and Reserves Utilizing Secondary/Tertiary Recovery Techniques on Small Reservoirs in the Paradox Basin, Utah

    International Nuclear Information System (INIS)

    Chidsey Jr., Thomas C.

    2003-01-01

    The primary objective of this project was to enhance domestic petroleum production by field demonstration and technology transfer of an advanced-oil-recovery technology in the Paradox Basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox Basin alone, and result in increased recovery of 150 to 200 million barrels (23,850,000-31,800,000 m3) of oil. This project was designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon-dioxide-(CO2-) miscible flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place within the Navajo Nation, San Juan County, Utah

  13. Increased Oil Production and Reserves Utilizing Secondary/Tertiary Recovery Techniques on Small Reservoirs in the Paradox Basin, Utah; ANNUAL

    International Nuclear Information System (INIS)

    Jr., Chidsey, Thomas C.; Allison, M. Lee

    1999-01-01

    The primary objective of this project is to enhance domestic petroleum production by field demonstration and technology transfer of an advanced- oil-recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to approximately 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million barrels (23,850,000-31,800,000 m3) of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon-dioxide-(CO2-) miscible flood project. The field demonstration, monitoring of field performance, and associated validation activities will take place within the Navajo Nation, San Juan County, Utah

  14. Conceptual design of krypton recovery plant by porous membrane method

    International Nuclear Information System (INIS)

    Yoshida, Hiroshi; Fujine, Sachio; Shimizu, Toku; Saito, Keiichiro; Ouchi, Misao

    1979-10-01

    A conceptual design of a krypton recovery plant by porous membrane method was made to study feasibility of treating fuel reprocessing off-gas. Specifications of the plant could be clarified, such as off-gas pretreatment system, first cascade system of gaseous diffusion Hertz cascade composed of two-compartment diffusers, storage system, shield and housing and operating conditions. Capital costs and operating costs of the plant were estimated for different operating conditions and cost parameters. Technical and economic feasibility of the method compares favorably with those of the cryogenic distillation or the solvent absorption method. (author)

  15. Methods of silver recovery from radiographs - comparative study

    Science.gov (United States)

    Canda, L. R.; Ardelean, E.; Hepuţ, T.

    2018-01-01

    Management and recovery of waste are activities with multiple impacts: technologically (by using waste on current production flows, thus replacing poor raw materials), economically (can substantially reduce manufacturing costs by recycling waste), social (by creating new jobs where it is necessary to process the waste in a form more suited to technological flows) and ecologically (by removing waste that is currently produced or already stored - but poses a threat to the health of the population and / or to the environment). This is also the case for medical waste, for example radiographs, which are currently produced in large quantities, for which replacement solutions are sought, but are currently stored by archiving in hospital units. The paper presents two methods used for this kind of waste management, the result being the recovery of silver, material with applications and with increasing price, but also the proper disposal of the polymeric support. This analysis aims at developing a more efficient recycling technology for medical radiographs.

  16. Method for the removal and recovery of mercury

    Science.gov (United States)

    Easterly, Clay E.; Vass, Arpad A.; Tyndall, Richard L.

    1997-01-01

    The present invention is an enhanced method for the removal and recovery of mercury from mercury-contaminated matrices. The method involves contacting a mercury-contaminated matrix with an aqueous dispersant solution derived from specific intra-amoebic isolates to release the mercury from the mercury-contaminated matrix and emulsify the mercury; then, contacting the matrix with an amalgamating metal from a metal source to amalgamate the mercury to the amalgamating metal; removing the metallic source from the mercury-contaminated matrix; and heating the metallic source to vaporize the mercury in a closed system to capture the mercury vapors.

  17. Increased Oil Production and Reserves Utilizing Secondary/Tertiary Recovery Techniques on Small Reservoirs in the Paradox Basin, Utah

    International Nuclear Information System (INIS)

    Allison, M. Lee; Chidsey, Thomas Jr.

    1999-01-01

    The primary objective of this project is to enhance domestic petroleum production by demonstration and technology transfer of an advanced oil recovery technology in the Paradox basin, southeastern Utah. If this project can demonstrate technical and economic feasibility, the technique can be applied to about 100 additional small fields in the Paradox basin alone, and result in increased recovery of 150 to 200 million bbl of oil. This project is designed to characterize five shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation and choose the best candidate for a pilot demonstration project for either a waterflood or carbon dioxide-(CO-) flood 2 project. The field demonstration, monitoring of field performance, and associated validation activities will take place in the Paradox basin within the Navajo Nation. The results of this project will be transferred to industry and other researchers through a petroleum extension service, creation of digital databases for distribution, technical workshops and seminars, field trips, technical presentations at national and regional professional meetings, and publication in newsletters and various technical or trade journals

  18. INCREASED OIL PRODUCTION AND RESERVES UTILIZING SECONDARY/TERTIARY RECOVERY TECHNIQUES ON SMALL RESERVOIRS IN THE PARADOX BASIN, UTAH

    Energy Technology Data Exchange (ETDEWEB)

    Thomas C. Chidsey, Jr.

    2002-11-01

    The Paradox Basin of Utah, Colorado, and Arizona contains nearly 100 small oil fields producing from shallow-shelf carbonate buildups or mounds within the Desert Creek zone of the Pennsylvanian (Desmoinesian) Paradox Formation. These fields typically have one to four wells with primary production ranging from 700,000 to 2,000,000 barrels (111,300-318,000 m{sup 3}) of oil per field at a 15 to 20 percent recovery rate. Five fields in southeastern Utah were evaluated for waterflood or carbon-dioxide (CO{sub 2})-miscible flood projects based upon geological characterization and reservoir modeling. Geological characterization on a local scale focused on reservoir heterogeneity, quality, and lateral continuity as well as possible compartmentalization within each of the five project fields. The Desert Creek zone includes three generalized facies belts: (1) open-marine, (2) shallow-shelf and shelf-margin, and (3) intra-shelf, salinity-restricted facies. These deposits have modern analogs near the coasts of the Bahamas, Florida, and Australia, respectively, and outcrop analogs along the San Juan River of southeastern Utah. The analogs display reservoir heterogeneity, flow barriers and baffles, and lithofacies geometry observed in the fields; thus, these properties were incorporated in the reservoir simulation models. Productive carbonate buildups consist of three types: (1) phylloid algal, (2) coralline algal, and (3) bryozoan. Phylloid-algal buildups have a mound-core interval and a supra-mound interval. Hydrocarbons are stratigraphically trapped in porous and permeable lithotypes within the mound-core intervals of the lower part of the buildups and the more heterogeneous supramound intervals. To adequately represent the observed spatial heterogeneities in reservoir properties, the phylloid-algal bafflestones of the mound-core interval and the dolomites of the overlying supra-mound interval were subdivided into ten architecturally distinct lithotypes, each of which

  19. Methods for enhancing mapping of thermal fronts in oil recovery

    Science.gov (United States)

    Lee, D.O.; Montoya, P.C.; Wayland, J.R. Jr.

    1984-03-30

    A method for enhancing the resistivity contrasts of a thermal front in an oil recovery production field as measured by the controlled source audio frequency magnetotelluric (CSAMT) technique is disclosed. This method includes the steps of: (1) preparing a CSAMT-determined topological resistivity map of the production field; (2) introducing a solution of a dopant material into the production field at a concentration effective to alter the resistivity associated with the thermal front; said dopant material having a high cation exchange capacity which might be selected from the group consisting of montmorillonite, illite, and chlorite clays; said material being soluble in the conate water of the production field; (3) preparing a CSAMT-determined topological resistivity map of the production field while said dopant material is moving therethrough; and (4) mathematically comparing the maps from step (1) and step (3) to determine the location of the thermal front. This method is effective with the steam flood, fire flood and water flood techniques.

  20. Integrated complex care coordination for children with medical complexity: A mixed-methods evaluation of tertiary care-community collaboration

    Directory of Open Access Journals (Sweden)

    Cohen Eyal

    2012-10-01

    Full Text Available Abstract Background Primary care medical homes may improve health outcomes for children with special healthcare needs (CSHCN, by improving care coordination. However, community-based primary care practices may be challenged to deliver comprehensive care coordination to complex subsets of CSHCN such as children with medical complexity (CMC. Linking a tertiary care center with the community may achieve cost effective and high quality care for CMC. The objective of this study was to evaluate the outcomes of community-based complex care clinics integrated with a tertiary care center. Methods A before- and after-intervention study design with mixed (quantitative/qualitative methods was utilized. Clinics at two community hospitals distant from tertiary care were staffed by local community pediatricians with the tertiary care center nurse practitioner and linked with primary care providers. Eighty-one children with underlying chronic conditions, fragility, requirement for high intensity care and/or technology assistance, and involvement of multiple providers participated. Main outcome measures included health care utilization and expenditures, parent reports of parent- and child-quality of life [QOL (SF-36®, CPCHILD©, PedsQL™], and family-centered care (MPOC-20®. Comparisons were made in equal (up to 1 year pre- and post-periods supplemented by qualitative perspectives of families and pediatricians. Results Total health care system costs decreased from median (IQR $244 (981 per patient per month (PPPM pre-enrolment to $131 (355 PPPM post-enrolment (p=.007, driven primarily by fewer inpatient days in the tertiary care center (p=.006. Parents reported decreased out of pocket expenses (p© domains [Health Standardization Section (p=.04; Comfort and Emotions (p=.03], while total CPCHILD© score decreased between baseline and 1 year (p=.003. Parents and providers reported the ability to receive care close to home as a key benefit. Conclusions Complex

  1. Recovery methods of the dragonfly from irregular initial conditions

    Science.gov (United States)

    Melfi, James; Leonardo, Anthony; Wang, Jane

    We release dragonflies from a magnetic tether in a wide range of initial orientations, which results in them utilizing multiple methods to regain their typical flight orientation. Special focus is placed on dropping them while upside down, as the recovery method used is a purely rolling motion. Filming this stereotypical motion with a trio of high speed cameras at 4000 fps, we capture detailed body and wing kinematics data to determine how the dragonfly generates this motion. By replaying the flights within a computer simulation, we can isolate the significant changes to wing kinematics, and find that it is an asymmetry in the wing pitch which generates the roll. Further investigation demonstrates that this choice is highly dependent upon the state of the dragonfly, and as such our results indicate the dragonfly both tracks its current state, and changes its mid-flight control mechanisms accordingly.

  2. Method for the recovery of Cr and Co species from effluents using ...

    African Journals Online (AJOL)

    Method for the recovery of Cr and Co species from effluents using agricultural adsorbent ... International Journal of Biological and Chemical Sciences ... recovery of Cr and Co species in microbial-treated industrial wastewater using agricultural ...

  3. Method for controlling exhaust gas heat recovery systems in vehicles

    Science.gov (United States)

    Spohn, Brian L.; Claypole, George M.; Starr, Richard D

    2013-06-11

    A method of operating a vehicle including an engine, a transmission, an exhaust gas heat recovery (EGHR) heat exchanger, and an oil-to-water heat exchanger providing selective heat-exchange communication between the engine and transmission. The method includes controlling a two-way valve, which is configured to be set to one of an engine position and a transmission position. The engine position allows heat-exchange communication between the EGHR heat exchanger and the engine, but does not allow heat-exchange communication between the EGHR heat exchanger and the oil-to-water heat exchanger. The transmission position allows heat-exchange communication between the EGHR heat exchanger, the oil-to-water heat exchanger, and the engine. The method also includes monitoring an ambient air temperature and comparing the monitored ambient air temperature to a predetermined cold ambient temperature. If the monitored ambient air temperature is greater than the predetermined cold ambient temperature, the two-way valve is set to the transmission position.

  4. Classification of methods and equipment recovery secondary waters

    Directory of Open Access Journals (Sweden)

    G. V. Kalashnikov

    2017-01-01

    Full Text Available The issues of purification of secondary waters of industrial production have an important place and are relevant in the environmental activities of all food and chemical industries. For cleaning the transporter-washing water of beet-sugar production the key role is played by the equipment of treatment plants. A wide variety of wastewater treatment equipment is classified according to various methods. Typical structures used are sedimentation tanks, hydrocyclones, separators, centrifuges. In turn, they have a different degree of purification, productivity through the incoming suspension and purified secondary water. This is equipment is divided into designs, depending on the range of particles to be removed. A general classification of methods for cleaning the transporter-washing water, as well as the corresponding equipment, is made. Based on the analysis of processes and instrumentation, the main methods of wastewater treatment are identified: mechanical, physicochemical, combined, biological and disinfection. To increase the degree of purification and reduce technical and economic costs, a combined method is widely used. The main task of the site for cleaning the transporter-washing waters of sugar beet production is to provide the enterprise with water in the required quantity and quality, with economical use of water resources, taking into account the absence of pollution of surface and groundwater by industrial wastewater. In the sugar industry is currently new types of washing equipment of foreign production are widely used, which require high quality and a large amount of purified transporter-washing water for normal operation. The proposed classification makes it possible to carry out a comparative technical and economic analysis when choosing the methods and equipment for recuperation of secondary waters. The main equipment secondary water recovery used at the beet-sugar plant is considered. The most common beet processing plant is a

  5. Incineration method for plutonium recovery from alpha contaminated organic compounds

    International Nuclear Information System (INIS)

    Yahata, Taneaki; Abe, Jiro; Kato, Michiharu; Kurihara, Masayoshi

    1985-01-01

    An incineration method for plutonium recovery from α contaminated organic compounds in a flow of controlled oxygen gas is stated. The species of such thermal decomposition products as hydrocarbons, free carbon, carbon monoxide and hydrogen were determined by mass spectrography. The mixture of the products which are the source of tar or soot was converted to CO 2 and H 2 O in contact with copper oxide catalyst without flaming. This incineration method is composed of two stages. The first stage is the decomposition of organic compounds in the streams of gas mixtures containing oxygen in low ratios. The second stage is the incineration of the decomposition products by catalytic reaction in the streams of gas with higher oxygen ratios. Plutonium was recovered as the form of plutonium dioxide from the incineration residues of the first stage. The behavior of oil was examined as a representative of liquid organic compounds. It was found to evaporate below ca. 500 0 C, but was completely incinerated by the catalytic reaction with copper oxide catalyst in the flow of gas with controlled oxygen amount and was changed to CO 2 and H 2 O. (author)

  6. Thermally-enhanced oil recovery method and apparatus

    Science.gov (United States)

    Stahl, Charles R.; Gibson, Michael A.; Knudsen, Christian W.

    1987-01-01

    A thermally-enhanced oil recovery method and apparatus for exploiting deep well reservoirs utilizes electric downhole steam generators to provide supplemental heat to generate high quality steam from hot pressurized water which is heated at the surface. A downhole electric heater placed within a well bore for local heating of the pressurized liquid water into steam is powered by electricity from the above-ground gas turbine-driven electric generators fueled by any clean fuel such as natural gas, distillate or some crude oils, or may come from the field being stimulated. Heat recovered from the turbine exhaust is used to provide the hot pressurized water. Electrical power may be cogenerated and sold to an electric utility to provide immediate cash flow and improved economics. During the cogeneration period (no electrical power to some or all of the downhole units), the oil field can continue to be stimulated by injecting hot pressurized water, which will flash into lower quality steam at reservoir conditions. The heater includes electrical heating elements supplied with three-phase alternating current or direct current. The injection fluid flows through the heater elements to generate high quality steam to exit at the bottom of the heater assembly into the reservoir. The injection tube is closed at the bottom and has radial orifices for expanding the injection fluid to reservoir pressure.

  7. Plasma methods for metals recovery from metal-containing waste.

    Science.gov (United States)

    Changming, Du; Chao, Shang; Gong, Xiangjie; Ting, Wang; Xiange, Wei

    2018-04-27

    Metal-containing waste, a kind of new wastes, has a great potential for recycling and is also difficult to deal with. Many countries pay more and more attention to develop the metal recovery process and equipment of this kind of waste as raw material, so as to solve the environmental pollution and comprehensively utilize the discarded metal resources. Plasma processing is an efficient and environmentally friendly way for metal-containing waste. This review mainly discuss various metal-containing waste types, such as printed circuit boards (PCBs), red mud, galvanic sludge, Zircon, aluminium dross and incinerated ash, and the corresponding plasma methods, which include DC extended transferred arc plasma reactor, DC non-transferred arc plasma torch, RF thermal plasma reactor and argon and argon-hydrogen plasma jets. In addition, the plasma arc melting technology has a better purification effect on the extraction of useful metals from metal-containing wastes, a great capacity of volume reduction of waste materials, and a low leaching toxicity of solid slag, which can also be used to deal with all kinds of metal waste materials, having a wide range of applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. Cutaneous blood flow. A comparative study between the thermal recovery method and the radioxenon clearance method

    Energy Technology Data Exchange (ETDEWEB)

    Tavares, C M; Ferreira, J M; Fernandes, F V

    1975-01-01

    Since 1968 a thermal recovery method to study the cutaneous circulation has been utilized in the detection of skin circulation changes caused by certain pharmacological agents or by some pathological conditions. This method is based in the determination of the thermal recuperation of a small area of the skin previously cooled. In this work, we want to present the results of a comparative analysis between the thermal recovery method and the clearance of the radioactive xenon injected intracutaneously. The study was performed in the distal extremity of the lower limbs in 16 normal subjects, 16 hyperthyroid patients with increased cutaneous temperature and 11 patients with presumably low cutaneous blood flow (3 patients with hypothyroidism and 8 with obstructive arteriosclerosis).

  9. Novel Methods to Study Aphasia Recovery after Stroke

    DEFF Research Database (Denmark)

    Hartwigsen, Gesa; Siebner, Hartwig R

    2013-01-01

    summarize how noninvasive brain stimulation can be used to elucidate mechanisms of plasticity in language networks and enhance language recovery after stroke. We first outline some basic principles of transcranial magnetic stimulation (TMS) and transcranial direct current stimulation (tDCS). We then present...... evidence from studies in healthy volunteers for a causal role of the right hemisphere in different language functions. Finally, we review recent studies that used TMS or tDCS to promote language recovery after stroke. Most of these studies applied noninvasive brain stimulation over contralateral right...

  10. Seismic data two-step recovery approach combining sparsity-promoting and hyperbolic Radon transform methods

    International Nuclear Information System (INIS)

    Wang, Hanchuang; Chen, Shengchang; Ren, Haoran; Liang, Donghui; Zhou, Huamin; She, Deping

    2015-01-01

    In current research of seismic data recovery problems, the sparsity-promoting method usually produces an insufficient recovery result at the locations of null traces. The HRT (hyperbolic Radon transform) method can be applied to problems of seismic data recovery with approximately hyperbolic events. Influenced by deviations of hyperbolic characteristics between real and ideal travel-time curves, some spurious events are usually introduced and the recovery effect of intermediate and far-offset traces is worse than that of near-offset traces. Sparsity-promoting recovery is primarily dependent on the sparsity of seismic data in the sparse transform domain (i.e. on the local waveform characteristics), whereas HRT recovery is severely affected by the global characteristics of the seismic events. Inspired by the above conclusion, a two-step recovery approach combining sparsity-promoting and time-invariant HRT methods is proposed, which is based on both local and global characteristics of the seismic data. Two implementation strategies are presented in detail, and the selection criteria of the relevant strategies is also discussed. Numerical examples of synthetic and real data verify that the new approach can achieve a better recovery effect by simultaneously overcoming the shortcomings of sparsity-promoting recovery and HRT recovery. (paper)

  11. General introduction and recovery factors

    Science.gov (United States)

    Verma, Mahendra K.

    2017-07-17

    IntroductionThe U.S. Geological Survey (USGS) compared methods for estimating an incremental recovery factor (RF) for the carbon dioxide enhanced oil recovery (CO2-EOR) process involving the injection of CO2 into oil reservoirs. This chapter first provides some basic information on the RF, including its dependence on various reservoir and operational parameters, and then discusses the three development phases of oil recovery—primary, second­ary, and tertiary (EOR). It ends with a brief discussion of the three approaches for estimating recovery factors, which are detailed in subsequent chapters.

  12. Recovery of mineral oil from waste emulsion using electrocoagulation method

    Directory of Open Access Journals (Sweden)

    Razali Mohd Najib

    2016-01-01

    Full Text Available This paper presents a research to recover mineral oil from industrial waste emulsion. This research also evaluates the standard of water produced after the oil recovery. The ecosystem could be polluted if this waste is not treated prior to discharge. The equipment needed for this experiment is power supply (generator, connecting wire and metal plate for providing the coagulant. The chosen plates were aluminium and iron plate. The power supply will be connected to the plate producing anode (positive terminal and cathode (negative terminal. Both plates are immersed into a beaker containing waste emulsion. The charge supplied by the current will cause the aluminium or ferum to dissisipate and became ions. These ions will attract the oil to flock together and float at the surface. The water will then filter by using filter paper. Electrocoagulation was done without addition of chemical thus can prevent the hazard from the chemicals. The samples was sent for oil and grease test. The optimum time needed for recovery of oil was 3 hours. The percentage recovery reach constant trend of 95% afterwards. When the power consumption increases, the percentage recovery also increases. However, the current should be lower than 0.5 ampere as it is the limit that human body can withstand. Thus, power consumption of 27.5 Watt was chosen as optimum value. The oil recovery of at power consumption at 27.5W is 96%. The best plate in the process was the aluminium pair which can recover more than ferum plate. The present work concludes the promising future for waste water treatment by usage of electrocoagulation technique.

  13. Conventional versus molecular methods for diagnosis of tuberculosis in a tertiary care center: A study from Punjab

    Directory of Open Access Journals (Sweden)

    Shavi Nagpal

    2016-01-01

    Full Text Available Background: A fast and accurate diagnosis is necessary to control and eliminate tuberculosis (TB. There have been various studies evaluating the efficacy of polymerase chain reaction (PCR testing in clinical practice. Most of these studies have found PCR as a useful tool to diagnose TB and more so for the extra-pulmonary cases. Aims and Objectives: The aim of the study was to evaluate the results of TB by real-time PCR versus the conventional methods of diagnosis in a tertiary care center in Punjab. Materials and Methods: This study was done in a tertiary care center of Punjab to look for the results of clinical samples tested for TB using PCR, Ziehl–Neelsen staining and culture on Lowenstein–Jensen medium. 16S rRNA gene was used for Mycobacterium tuberculosis detection in PCR. This study included all samples tested for TB from July 2015 to October 2015. Results: A total of 214 samples were tested for TB using smear microscopy, culture and PCR (including 194 [90.6%] extra-pulmonary and 20 [9.3%] pulmonary samples. These included 76 cerebrospinal fluid, 30 pleural fluid, 42 tissues, 17 ascitic fluid, 13 urine, 15 bronchoalveolar lavage (BAL, 16 pus, and 5 sputum samples. Smear microscopy was positive in a total of 4 samples out of 214 (1.8%, which included 2 sputum, 1 tissue, and 1 ascitic fluid samples, while culture was positive for 6 samples (2.8% which included 2 sputum, 1 pus, 1 BAL, 1 tissue, and 1 ascitic fluid sample. The TB PCR results were positive in a total of 71 (33.1% samples out of 214. In addition, three samples also tested positive for Mycobacteria other than TB. Conclusion: PCR is a very rapid and accurate diagnostic tool for early detection of TB in particularly for extrapulmonary TB.

  14. Evaluation of Etiology and Treatment Methods for Epistaxis: A Review at a Tertiary Care Hospital in Central Nepal

    Science.gov (United States)

    2015-01-01

    Introduction. Epistaxis is one of the most common emergencies in Otorhinolaryngology. It is usually managed with simple conservative measures but occasionally it is a life threatening condition. Identification of the cause is important, as it reflects the management plan being followed. Aims and Objectives. To analyze the etiology and treatment methods for patients with epistaxis. Methods. A retrospective study was done in a tertiary care hospital in central Nepal. The study period was from May 2014 to April 2015. Results. A total of 84 patients had epistaxis; 52 were males and 32 were females. The most common cause of epistaxis was idiopathic (38.09%) followed by hypertension (27.38%), trauma (15.47%), and coagulopathy (8.33%). Regarding treatment methods, most (52.38%) of our patients required anterior nasal packing. Chemical cautery was sufficient to stop bleeding in 14.28% of patients while electrocautery and posterior nasal packing were performed in 2.38% and 16.66% patients, respectively. Two (2.38%) patients required endoscopic sphenopalatine arterial ligation. Conclusion. Hypertension, trauma and coagulopathy were the most common etiological factors among the patients in whom etiology was found although in most of the patients etiology could not be found. Anterior nasal packing was the most common treatment method applied to these patients. PMID:26346242

  15. Evaluation of Etiology and Treatment Methods for Epistaxis: A Review at a Tertiary Care Hospital in Central Nepal.

    Science.gov (United States)

    Parajuli, Ramesh

    2015-01-01

    Introduction. Epistaxis is one of the most common emergencies in Otorhinolaryngology. It is usually managed with simple conservative measures but occasionally it is a life threatening condition. Identification of the cause is important, as it reflects the management plan being followed. Aims and Objectives. To analyze the etiology and treatment methods for patients with epistaxis. Methods. A retrospective study was done in a tertiary care hospital in central Nepal. The study period was from May 2014 to April 2015. Results. A total of 84 patients had epistaxis; 52 were males and 32 were females. The most common cause of epistaxis was idiopathic (38.09%) followed by hypertension (27.38%), trauma (15.47%), and coagulopathy (8.33%). Regarding treatment methods, most (52.38%) of our patients required anterior nasal packing. Chemical cautery was sufficient to stop bleeding in 14.28% of patients while electrocautery and posterior nasal packing were performed in 2.38% and 16.66% patients, respectively. Two (2.38%) patients required endoscopic sphenopalatine arterial ligation. Conclusion. Hypertension, trauma and coagulopathy were the most common etiological factors among the patients in whom etiology was found although in most of the patients etiology could not be found. Anterior nasal packing was the most common treatment method applied to these patients.

  16. Evaluation of Etiology and Treatment Methods for Epistaxis: A Review at a Tertiary Care Hospital in Central Nepal

    Directory of Open Access Journals (Sweden)

    Ramesh Parajuli

    2015-01-01

    Full Text Available Introduction. Epistaxis is one of the most common emergencies in Otorhinolaryngology. It is usually managed with simple conservative measures but occasionally it is a life threatening condition. Identification of the cause is important, as it reflects the management plan being followed. Aims and Objectives. To analyze the etiology and treatment methods for patients with epistaxis. Methods. A retrospective study was done in a tertiary care hospital in central Nepal. The study period was from May 2014 to April 2015. Results. A total of 84 patients had epistaxis; 52 were males and 32 were females. The most common cause of epistaxis was idiopathic (38.09% followed by hypertension (27.38%, trauma (15.47%, and coagulopathy (8.33%. Regarding treatment methods, most (52.38% of our patients required anterior nasal packing. Chemical cautery was sufficient to stop bleeding in 14.28% of patients while electrocautery and posterior nasal packing were performed in 2.38% and 16.66% patients, respectively. Two (2.38% patients required endoscopic sphenopalatine arterial ligation. Conclusion. Hypertension, trauma and coagulopathy were the most common etiological factors among the patients in whom etiology was found although in most of the patients etiology could not be found. Anterior nasal packing was the most common treatment method applied to these patients.

  17. Dietetic- nutritional, physical and physiological recovery methods post-competition in team sports. A review.

    Science.gov (United States)

    Terrados, Nicolas; Mielgo-Ayuso, Juan; Delextrat, Anne; Ostojic, Sergej M; Calleja-González, Julio

    2018-03-27

    To a proper recovery, is absolutely necessary to know that athletes with enhanced recovery after maximal exercise are likely to perform better in sports. Recovery strategies are commonly used in team sports despite limited scientific evidence to support their effectiveness in facilitating optimal recovery and the players spend a much greater proportion of their time recovering than they do in training. According to authors, some studies investigated the effect of recovery strategies on physical performance in team sports, lack of experimental studies about the real origin of the fatigue, certify the need for further study this phenomenon. Thus, developing effective methods for helping athletes to recover is deemed essential. Therefore, the aim of this review is provide information for his practical application, based on scientific evidence about recovery in team sports.

  18. Recovery of DNA from agarose gel by trap method | Xia | African ...

    African Journals Online (AJOL)

    Recovery of DNA from agarose gel electrophoresis is a basic operation during molecular cloning. Circular or linear DNA fragments which vary from 1.5 to 6.5 kb and correspond to 1 kb marker can be recovered from 0.8 to 1.0% agarose gel smoothly with a simple and rapid trap method. The recovery efficiency could be ...

  19. System and method for determining the net output torque from a waste heat recovery system

    Science.gov (United States)

    Tricaud, Christophe; Ernst, Timothy C.; Zigan, James A.

    2016-12-13

    The disclosure provides a waste heat recovery system with a system and method for calculation of the net output torque from the waste heat recovery system. The calculation uses inputs from existing pressure and speed sensors to create a virtual pump torque sensor and a virtual expander torque sensor, and uses these sensors to provide an accurate net torque output from the WHR system.

  20. Downhole fluid injection systems, CO2 sequestration methods, and hydrocarbon material recovery methods

    Science.gov (United States)

    Schaef, Herbert T.; McGrail, B. Peter

    2015-07-28

    Downhole fluid injection systems are provided that can include a first well extending into a geological formation, and a fluid injector assembly located within the well. The fluid injector assembly can be configured to inject a liquid CO2/H2O-emulsion into the surrounding geological formation. CO2 sequestration methods are provided that can include exposing a geological formation to a liquid CO2/H2O-emulsion to sequester at least a portion of the CO2 from the emulsion within the formation. Hydrocarbon material recovery methods are provided that can include exposing a liquid CO2/H2O-emulsion to a geological formation having the hydrocarbon material therein. The methods can include recovering at least a portion of the hydrocarbon material from the formation.

  1. Aircraft Route Recovery Based on An Improved GRASP Method

    Directory of Open Access Journals (Sweden)

    Yang He

    2017-01-01

    Full Text Available Aircrafts maintenance, temporary airport closures are common factors that disrupt normal flight schedule. The aircraft route recovery aims to recover original schedules by some strategies, including flights swaps, and cancellations, which is a NP-hard problem. This paper proposes an improved heuristic procedure based on Greedy Random Adaptive Search Procedure (GRASP to solve this problem. The effectiveness and high global optimization capability of the heuristic is illustrated through experiments based on large-scale problems. Compared to the original one, it is shown that the improved procedure can find feasible flight recovered schedules with lower cost in a short time.

  2. Method for thermal recovery of hydrocarbons from an underground formation

    Energy Technology Data Exchange (ETDEWEB)

    1962-11-13

    In a thermal recovery procedure for hydrocarbons from an underground formation, an oxygen-containing gas is injected through at least one input well into the formation. A part of the hydrocarbons in the formation is then ignited and an oxidation front is created. This front moves under the influence of the injected gas to at least one production well in the formation. The temperature in the burning front is higher than approximately 200/sup 0/C but lower than approximately 350/sup 0/C. (4 claims)

  3. A novel tertiary prep-HPLC method for the isolation of single amino acids for AMS-radiocarbon measurement.

    Science.gov (United States)

    Fernandes, Ricardo; Koudelka, Tomas; Tholey, Andreas; Dreves, Alexander

    2017-07-15

    AMS-radiocarbon measurements of amino acids can potentially provide more reliable radiocarbon dates than bulk collagen analysis. Nonetheless, the applicability of such an approach is often limited by the low-throughput of existing isolation methods and difficulties in determining the contamination introduced during the separation process. A novel tertiary prep-HPLC amino acid isolation method was developed that relies on the combustion of eluted material without requiring any additional chemical steps. Amino acid separation was carried out using a gradient mix of pure water and phosphoric acid with an acetonitrile step in-between runs to remove hydrophobic molecules from the separation column. The amount of contaminant carbon and its 14 C content were determined from two-point measurements of collagen samples of known 14 C content. The amount of foreign carbon due to the isolation process was estimated at 4±1μg and its 14 C content was 0.43±0.01 F 14 C. Radiocarbon values corrected for carbon contamination have only a minor increase in uncertainties. For Holocene samples, this corresponds to an added uncertainty typically smaller than 10 14 Cyears. The developed method can be added to routine AMS measurements without implying significant operational changes and offers a level of measurement uncertainty that is suitable for many archaeological, ecological, environmental, and biological applications. Copyright © 2017. Published by Elsevier B.V.

  4. Aqueous methods for recovery of plutonium from pyrochemical residues

    International Nuclear Information System (INIS)

    Muscatello, A.C.; Killion, M.E.; Fisher, D.C.

    1987-01-01

    Studies of the recovery of plutonium from the pyrochemical residue salts from the Direct Oxide Reduction (DOR) and Electrorefining (ER) processes have shown that chloride anion exchange is useful and effective. Our previous studies have defined the operating limits for obtaining low level effluent plutonium losses on the order of 10 -3 g/l. The knowledge obtained in work on DOR salt was extended to ER salt and a process has been demonstrated to be feasible on a larger scale. Studies of oxalate precipitation of plutonium (III) from the eluat exhibit the expected losses to the filtrate as a function of the acidity. Two alternatives to chloride anion exchange, caustic leaching and direct oxalate precipitation are also shown to be feasible for the recovery of plutonium from ER salts. The results of studies of coprocessing DOR and ER residue salts to increase ER salt throughput and decrease HC1 requirements are also presented. The feasibility of coprocessing other pyrochemical residues, such as black salts, anode heel, and ER scrapeout will be discussed

  5. A Case Study Analysis of Clt Methods to Develop Grammar Competency for Academic Writing Purposes at Tertiary Level

    Directory of Open Access Journals (Sweden)

    Almodad Biduk Asmani

    2013-10-01

    Full Text Available The purpose of the research project is to find out how effective grammar teaching and learning using the Principled CLT method can improve the ability of freshman Binus University students to understand and use grammar knowledge for academic writing purposes. The research project is expected to result in computer-animated format which can be used as one of the main tools in teaching and learning grammar at tertiary level. The research project applies the descriptive quantitative approach, and thus uses numeric data. The research project involves two subject groups, which are experimental and control. The two groups are pre-tested so as to find out their level of grammar competency by their academic writing works. The experimental group receives the treatment of grammar learning by using the Principled CLT approach, while the control group receives the standard CLT approach. Then, the two groups have the post-test, and the results are compared. Through statistics, the numerical data show that there is no significant difference between the two methods’ results, and as a result, either method has its own strength and weaknesses. If one is to be implemented, it must be linked to the specific goals and purposes that each entails.  

  6. Effectiveness evaluation of whole-body electromyostimulation as a post-exercise recovery method.

    Science.gov (United States)

    DE LA Camara, Miguel A; Pardos, Ana I; Veiga, Óscar L

    2018-01-04

    Whole-body electromyostimulation (WB-EMS) devices are now being used in health and sports training, although there are few studies investigating their benefits. The objective of this research was to evaluate the effectiveness of WB-EMS as a post-exercise recovery method, and compare it with other methods like active and passive recovery. The study included nine trained men (age = 21 ± 1years, height = 1.77 ± 0.4 m, mass = 62 ± 7 kg). Three trials were performed in three different sessions, 1 week apart. Each trial, the participants completed the same exercise protocol and a different recovery method each time. A repeated measures design was used to check the basal reestablishing on several physiological variables [lactate, heart rate, percentage of tissue hemoglobin saturation, temperature, and neuromuscular fatigue] and to evaluate the quality of recovery. The non-parametric Wilcoxon and Friedman ANOVA tests were used to examine the differences between recovery methods. The results showed no differences between methods in the physiological and psychological variables analyzed. Although, the blood lactate concentration showed borderline statistical significance between methods (P = 0.050). Likewise, WB-EMS failed to recover baseline blood lactate concentration (P = 0.021) and percentage of tissue hemoglobin saturation (P = 0.023), in contrast to the other two methods. These findings suggest that WB-EMS is not a good recovery method because the power of reestablishing of several physiological and psychological parameters is not superior to other recovery methods like active and passive recovery.

  7. Learning Financial Accounting in a Tertiary Institution of a Developing Country. An Investigation into Instructional Methods

    Science.gov (United States)

    Abeysekera, Indra

    2011-01-01

    This study examines three instructional methods (traditional, interactive, and group case-based study), and student opinions on their preference for learning financial accounting in large classes at a metropolitan university in Sri Lanka. It analyses the results of a survey questionnaire of students, using quantitative techniques to determine the…

  8. Spray method for recovery of heat-injured Salmonella Typhimurium and Listeria monocytogenes.

    Science.gov (United States)

    Back, Kyeong-Hwan; Kim, Sang-Oh; Park, Ki-Hwan; Chung, Myung-Sub; Kang, Dong-Hyun

    2012-10-01

    Selective agar is inadequate for supporting recovery of injured cells. During risk assessment of certain foods, both injured and noninjured cells must be enumerated. In this study, a new method (agar spray method) for recovering sublethally heat-injured microorganisms was developed and used for recovery of heat-injured Salmonella Typhimurium and Listeria monocytogenes. Molten selective agar was applied as an overlay to presolidified nonselective tryptic soy agar (TSA) by spray application. Heat-injured cells (55°C for 10 min in 0.1% peptone water or 55°C for 15 min in sterilized skim milk) were inoculated directly onto solidified TSA. After a 2-h incubation period for cell repair, selective agar was applied to the TSA surface with a sprayer, and the plates were incubated. The recovery rate for heat-injured Salmonella Typhimurium and L. monocytogenes with the spray method was compared with the corresponding rates associated with TSA alone, selective media alone, and the conventional overlay method (selective agar poured on top of resuscitated cells grown on TSA and incubated for 2 h). No significant differences (P > 0.05) were found in pathogen recovery obtained with TSA, the overlay method, and the spray method. However, a lower recovery rate (P recovery and detection of injured cells.

  9. Different cell disruption methods for astaxanthin recovery by Phaffia ...

    African Journals Online (AJOL)

    Y17268, drying and freeze pretreatments were tested by different cell disruption methods: abrasion with celite, glass pearls in vortex agitator, ultrasonic waves, sodium carbonate (Na2CO3) and dimethyl sulfoxide (DMSO). The method with ...

  10. Methods and complications of septic induced abortion in patients managed at a tertiary care hospital.

    Science.gov (United States)

    Jabeen, Alia; Dawood, Nasira Sabiha; Riaz, Shazia; Tanveer, Shamaila

    2013-01-01

    To study the methods used for the termination of pregnancy and associated complications of induced abortion. This descriptive study was conducted in the department of obstetrics and gynaecology, Fauji Foundation Hospital Rawalpindi. One Hundred patients were included in the study who was admitted with the history of induced abortion. The patients were assessed by detailed history and thorough clinical examination according to the study protocol. Data was collected on a specially designed Performa. Patients were interviewed in privacy and factors contributing to termination of pregnancy like age, parity, socioeconomic status and contraceptive failure were determined. Methods used for the procedure, status of abortionist were asked. Complications were determined by history, clinical examination and ultrasound examination. In view of all above data recommendations of preventing unwanted pregnancies were made. All patients were married and 57% of women belonged to age group of 31-40 years. Fifty-four 54% were grand multipara. In 63% of patients, induced abortion was carried out by Dai's. Most commonly used method was instrumentation (72%). Financial problems (46.7% ) and high parity (40%) were the most common factors contributing to termination of pregnancy. Serious complications like uterine perforation with or without bowel injury were accounted in 13% of women, septicaemia in 61%, peritonitis in 15% and DIC in 2%. During the study period illegally induced abortion accounted for 2% maternal deaths. Prevalence of poverty, illiteracy, grand multiparity and non-compliance of contraception were strong determinants of induced abortion, instrumentation being the most commonly used procedure resulting in high morbidity and mortality.

  11. Nonpharmacological methods in managing patients with dementia in a tertiary care hospital.

    Science.gov (United States)

    Pandey, Nisha Mani; Tripathi, Shailendra Mohan; Singh, Bhupendra; Tiwari, Sarvada Chandra

    2018-01-01

    Management of dementia is very crucial. Nonpharmacological methods (NPM) are well appreciated and encouraged to be used as first-line treatment for managing elderly patients with dementia (PwD). The present case reports aimed to share the strategies of NPM for managing PwD. NPM requires a structured blueprint to record, follow-up, and monitor the outcomes. A structured proforma has been developed in the department. After getting all the basic information from the patient, needed assessments are being done by the concerned team member to identify and rate the level of severity of the problem, and specific NPM strategies are being provided. Concerted efforts give positive results; knowledge and understanding about the illness help the caregiver in managing the patient. No negative impact has been reported; NPM is a cost-effective approach and therefore should be studied on a larger level to provide evidence from India and prove its efficacy.

  12. Method for energy recovery of spent ERL beams

    Energy Technology Data Exchange (ETDEWEB)

    Marhauser, Frank; Hannon, Fay; Rimmer, Robert; Whitney, R. Roy

    2018-01-16

    A method for recovering energy from spent energy recovered linac (ERL) beams. The method includes adding a plurality of passive decelerating cavities at the beam dump of the ERL, adding one or more coupling waveguides between the passive decelerating cavities, setting an adequate external Q (Qext) to adjust to the beam loading situation, and extracting the RF energy through the coupling waveguides.

  13. Comparison of Different Drying Methods for Recovery of Mushroom DNA.

    Science.gov (United States)

    Wang, Shouxian; Liu, Yu; Xu, Jianping

    2017-06-07

    Several methods have been reported for drying mushroom specimens for population genetic, taxonomic, and phylogenetic studies. However, most methods have not been directly compared for their effectiveness in preserving mushroom DNA. In this study, we compared silica gel drying at ambient temperature and oven drying at seven different temperatures. Two mushroom species representing two types of fruiting bodies were examined: the fleshy button mushroom Agaricus bisporus and the leathery shelf fungus Trametes versicolor. For each species dried with the eight methods, we assessed the mushroom water loss rate, the quality and quantity of extracted DNA, and the effectiveness of using the extracted DNA as a template for PCR amplification of two DNA fragments (ITS and a single copy gene). Dried specimens from all tested methods yielded sufficient DNA for PCR amplification of the two genes in both species. However, differences among the methods for the two species were found in: (i) the time required by different drying methods for the fresh mushroom tissue to reach a stable weight; and (ii) the relative quality and quantity of the extracted genomic DNA. Among these methods, oven drying at 70 °C for 3-4 h seemed the most efficient for preserving field mushroom samples for subsequent molecular work.

  14. An improved cell recovery method for iron oxidizing bacterial (IOB) enrichments

    DEFF Research Database (Denmark)

    Yu, Ran; Graf, Joerg; Smets, Barth F.

    2008-01-01

    Two cell recovery methods for IOB enrichments were evaluated for DNA extraction and further PCR-based 16S rRNA gene clone library creation. One was a published method consisting of heating plus oxalic acid treatment and the other one was a new method based on enzymatic agarose digestion (using β...

  15. Silver recovery from the waste materials by the method of flotation process

    Directory of Open Access Journals (Sweden)

    B. Oleksiak

    2018-01-01

    Full Text Available During the leaching process of zinc concentrates, the waste materials rich in various metals such as eg. silver are produced. So far no attempts of silver recovery from the mentioned waste materials have been made due to the lack of any method which would be both effective and beneficial. The paper presents some possibilities of application of flotation process in silver recovery form waste materials generated during zinc production.

  16. Silver recovery from the waste materials by the method of flotation process

    OpenAIRE

    B. Oleksiak; G. Siwiec; A. Tomaszewska; D. Piękoś

    2018-01-01

    During the leaching process of zinc concentrates, the waste materials rich in various metals such as eg. silver are produced. So far no attempts of silver recovery from the mentioned waste materials have been made due to the lack of any method which would be both effective and beneficial. The paper presents some possibilities of application of flotation process in silver recovery form waste materials generated during zinc production.

  17. Comparison of the lysis centrifugation method with the conventional blood culture method in cases of sepsis in a tertiary care hospital.

    Science.gov (United States)

    Parikh, Harshal R; De, Anuradha S; Baveja, Sujata M

    2012-07-01

    Physicians and microbiologists have long recognized that the presence of living microorganisms in the blood of a patient carries with it considerable morbidity and mortality. Hence, blood cultures have become critically important and frequently performed test in clinical microbiology laboratories for diagnosis of sepsis. To compare the conventional blood culture method with the lysis centrifugation method in cases of sepsis. Two hundred nonduplicate blood cultures from cases of sepsis were analyzed using two blood culture methods concurrently for recovery of bacteria from patients diagnosed clinically with sepsis - the conventional blood culture method using trypticase soy broth and the lysis centrifugation method using saponin by centrifuging at 3000 g for 30 minutes. Overall bacteria recovered from 200 blood cultures were 17.5%. The conventional blood culture method had a higher yield of organisms, especially Gram positive cocci. The lysis centrifugation method was comparable with the former method with respect to Gram negative bacilli. The sensitivity of lysis centrifugation method in comparison to conventional blood culture method was 49.75% in this study, specificity was 98.21% and diagnostic accuracy was 89.5%. In almost every instance, the time required for detection of the growth was earlier by lysis centrifugation method, which was statistically significant. Contamination by lysis centrifugation was minimal, while that by conventional method was high. Time to growth by the lysis centrifugation method was highly significant (P value 0.000) as compared to time to growth by the conventional blood culture method. For the diagnosis of sepsis, combination of the lysis centrifugation method and the conventional blood culture method with trypticase soy broth or biphasic media is advocable, in order to achieve faster recovery and a better yield of microorganisms.

  18. Centrifugal washing and recovery as an improved method for obtaining lignin precipitated from South African kraft mill black liquor

    CSIR Research Space (South Africa)

    Namane, M

    2015-10-01

    Full Text Available This study describes centrifugal recovery as an improved method for collection of lignin isolated from black liquor obtained from a South African kraft mill. Precipitation of lignin was achieved by utilising 6 M sulphuric acid. Recovery...

  19. Methods for treating hydrocarbon recovery operations and industrial waters

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, N.E.S.; Asperger, R.G.

    1989-05-02

    This patent describes a method for consisting adding to the emulsion an effective demulsifying amount of a composition comprising a compound containing: an alkane triyl group of 1 to 30 carbon atoms; an alkylene group of 1 to 30 carbon atoms; and an alkali or alkaline earth metal group or an ammonium group.

  20. Method for recovery of uranium from phosphoric acid

    International Nuclear Information System (INIS)

    Duarte Neto, J.

    1984-01-01

    The results of a method for recuperation of uranium from phosphoric acid by humid way are presented. The extracting mixture used was di-ethylhexylphosphoric acid (D 2 EHPA) and trioctylphosphine oxide (TOPO). An installation in micro-pilot scale was made to get and visualize data for continuous process. (M.A.C.) [pt

  1. Method of recovery of U, Pu and their compounds

    International Nuclear Information System (INIS)

    Cech, B.; Kaderabek, E.; Hanslik, T.

    1977-01-01

    A method is proposed of removing metal sheaths consisting of either Zr or Nb or Ti or an alloy of at least two of the metals from ceramic nuclear fuel based on U or Pu compounds. The system is exposed to hydrogen, preferably at temperatures of 250 to 460 degC and pressures of 20 to 50 at. The resulting zirconium hydride or hydrides of other metals is separated, eg., mechanically. (M.K.)

  2. Analytical methods associated with the recovery of uranium

    International Nuclear Information System (INIS)

    Dixon, K.

    1983-01-01

    This report summarizes various approaches made to the analysis of materials arising from the processing of Karoo deposits for uranium. These materials include head and residue samples, aqueous solutions and organic solvents and, finally, the precipitated cakes of the elements recovered, i.e. uranium, molybdenum, and arsenic. Analysis was required for these elements and also vanadium, carbon, sulphur, and carbonate in the head and residue samples. The concentration of uranium, molybdenum, and arsenic, other than in the precipitated cakes, ranges from 1 to 2000μg/g, and that of carbon, sulphur, and carbonate from 0,1 to 5 per cent. The analysis of cakes necessitates the determination of silver, arsenic, iron, copper, calcium, magnesium, manganese, molybdenum, lead, tin, titanium, and vanadium within the range 1 to 1000μg/g, and of sodium and silica within the range 10 to 20 000μg/g. The methods used include combustion methods for carbon, sulphur, and carbonate, and atomic-absorption, X-ray-fluorescence, and emission methods for the other analytes. The accuracy of the analysis is within 10 per cent

  3. An optimized rapid bisulfite conversion method with high recovery of cell-free DNA.

    Science.gov (United States)

    Yi, Shaohua; Long, Fei; Cheng, Juanbo; Huang, Daixin

    2017-12-19

    Methylation analysis of cell-free DNA is a encouraging tool for tumor diagnosis, monitoring and prognosis. Sensitivity of methylation analysis is a very important matter due to the tiny amounts of cell-free DNA available in plasma. Most current methods of DNA methylation analysis are based on the difference of bisulfite-mediated deamination of cytosine between cytosine and 5-methylcytosine. However, the recovery of bisulfite-converted DNA based on current methods is very poor for the methylation analysis of cell-free DNA. We optimized a rapid method for the crucial steps of bisulfite conversion with high recovery of cell-free DNA. A rapid deamination step and alkaline desulfonation was combined with the purification of DNA on a silica column. The conversion efficiency and recovery of bisulfite-treated DNA was investigated by the droplet digital PCR. The optimization of the reaction results in complete cytosine conversion in 30 min at 70 °C and about 65% of recovery of bisulfite-treated cell-free DNA, which is higher than current methods. The method allows high recovery from low levels of bisulfite-treated cell-free DNA, enhancing the analysis sensitivity of methylation detection from cell-free DNA.

  4. Method to Find Recovery Event Combinations in Probabilistic Safety Assessment

    International Nuclear Information System (INIS)

    Jung, Woo Sik; Riley, Jeff

    2016-01-01

    These research activities may develop mathematical methods, engineering analyses, and business processes. The research activities of the project covered by this scope are directed toward the specific issues of implementing the methods and strategies on a computational platform, identifying the features and enhancements to EPRI tools that would be necessary to realize significant improvements to the risk assessments performed by the end user. Fault tree analysis is extensively and successfully applied to the risk assessment of safety-critical systems such as nuclear, chemical and aerospace systems. The fault tree analysis is being used together with an event tree analysis in PSA of nuclear power plants. Fault tree solvers for a PSA are mostly based on the cutset-based algorithm. They generate minimal cut sets (MCSs) from a fault tree. The most popular fault tree solver in the PSA industry is FTREX. During the course of this project, certain technical issues (see Sections 2 to 5) have been identified that need to be addressed regarding how minimal cut sets are generated and quantified. The objective of this scope of the work was to develop new methods or techniques to address these technical limitations. By turning on all the cutset initiators (%1, %2, %3, %), all the possible minimal cut sets can be calculated easier than with the original fault tree. It is accomplished by the fact that the number of events in the minimal cut sets are significantly reduced by using cutset initiators instead of random failure events. And byy turning on a few chosen cutset initiators and turning off the other cutset initiators, minimal cut sets of the selected cutset initiator(s) can be easily calculated. As explained in the previous Sections, there is no way to calculate these minimal cut sets by turning off/on the random failure events in the original fault tree

  5. Method to Find Recovery Event Combinations in Probabilistic Safety Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Woo Sik [Sejong University, Seoul (Korea, Republic of); Riley, Jeff [Electric Power Research, Palo Alto (United States)

    2016-05-15

    These research activities may develop mathematical methods, engineering analyses, and business processes. The research activities of the project covered by this scope are directed toward the specific issues of implementing the methods and strategies on a computational platform, identifying the features and enhancements to EPRI tools that would be necessary to realize significant improvements to the risk assessments performed by the end user. Fault tree analysis is extensively and successfully applied to the risk assessment of safety-critical systems such as nuclear, chemical and aerospace systems. The fault tree analysis is being used together with an event tree analysis in PSA of nuclear power plants. Fault tree solvers for a PSA are mostly based on the cutset-based algorithm. They generate minimal cut sets (MCSs) from a fault tree. The most popular fault tree solver in the PSA industry is FTREX. During the course of this project, certain technical issues (see Sections 2 to 5) have been identified that need to be addressed regarding how minimal cut sets are generated and quantified. The objective of this scope of the work was to develop new methods or techniques to address these technical limitations. By turning on all the cutset initiators (%1, %2, %3, %), all the possible minimal cut sets can be calculated easier than with the original fault tree. It is accomplished by the fact that the number of events in the minimal cut sets are significantly reduced by using cutset initiators instead of random failure events. And byy turning on a few chosen cutset initiators and turning off the other cutset initiators, minimal cut sets of the selected cutset initiator(s) can be easily calculated. As explained in the previous Sections, there is no way to calculate these minimal cut sets by turning off/on the random failure events in the original fault tree.

  6. On the convergence of nonconvex minimization methods for image recovery.

    Science.gov (United States)

    Xiao, Jin; Ng, Michael Kwok-Po; Yang, Yu-Fei

    2015-05-01

    Nonconvex nonsmooth regularization method has been shown to be effective for restoring images with neat edges. Fast alternating minimization schemes have also been proposed and developed to solve the nonconvex nonsmooth minimization problem. The main contribution of this paper is to show the convergence of these alternating minimization schemes, based on the Kurdyka-Łojasiewicz property. In particular, we show that the iterates generated by the alternating minimization scheme, converges to a critical point of this nonconvex nonsmooth objective function. We also extend the analysis to nonconvex nonsmooth regularization model with box constraints, and obtain similar convergence results of the related minimization algorithm. Numerical examples are given to illustrate our convergence analysis.

  7. Thermal oil recovery method using self-contained windelectric sets

    Science.gov (United States)

    Belsky, A. A.; Korolyov, I. A.

    2018-05-01

    The paper reviews challenges associated with questions of efficiency of thermal methods of impact on productive oil strata. The concept of using electrothermal complexes with WEG power supply for the indicated purposes was proposed and justified, their operating principles, main advantages and disadvantages, as well as a schematechnical solution for the implementation of the intensification of oil extraction, were considered. A mathematical model for finding the operating characteristics of WEG is presented and its main energy parameters are determined. The adequacy of the mathematical model is confirmed by laboratory simulation stand tests with nominal parameters.

  8. Routine methods for post-transportation accident recovery of spent fuel casks

    International Nuclear Information System (INIS)

    Shappert, L.B.; Pope, R.B.; Best, R.E.; Jones, R.H.

    1991-01-01

    Spent fuel casks and other large radioactive material packages have been examined to determine whether the designs are adequate to allow the casks to be recovered using conventional recovery methods following a transportation accident. Casks and similar packages are typically designed with, and handled by, trunnions that support the package during transport. These trunnions are considered the best cask feature with which to grapple the cask once it is no longer in its usual shipping mode. Following a transport accident, the trunnions may be buried or entangled so that they are not readily accessible to initiate the recovery process. To evaluate the effectiveness of applying traditional recovery methods to spent fuel casks, a workshop was held in which a series of accidents involving casks were postulated; the modes of transportation considered included truck, rail, and barge. These participants knowledgeable in transport, handling, and, in some cases, recovery of large, heavy containers attended. Participants concluded that the physical recovery of a cask involved in an accident, irrespective of where the accident occurs, would be a straightforward rigging operation and that the addition of specific recovery features (e.g., additional trunnions) to the cask appears unnecessary

  9. Acute Effect of Lower-Body Vibration as a Recovery Method After Fatiguing Exercise

    Directory of Open Access Journals (Sweden)

    Svetlana Nepocatych

    2015-09-01

    Full Text Available The purpose of this study was to compare three recovery methods: control (CON, lower-body vibration (LBV and LBV+ local muscle cooling (LBVC on lower-body performance, perceived recovery, and muscle soreness. Physically active male volunteers (n=8 in a repeated-measures, counterbalanced design, completed three sets of squats to fatigue, each recovery treatment, and two Wingate Anaerobic Tests. Rating of perceived exertion (RPE, and heart rate (HR were measured after fatiguing exercise, recovery treatment and Wingate Anaerobic tests. Peak and mean power, fatigue index, Delayed Onset Muscle Soreness (DOMS, and comfort levels were compared between each treatment. In Wingate 1, no significant differences (p=0.42 were found among CON, LBV, or LBVC regarding peak power (1119±239, 1097±225, and 1146±260 W, respectively, mean power (p=0.32, or fatigue index (p=0.47. In Wingate 2, no significant (p=0.17 differences were found among CON, LBV, or LBVC regarding peak power (1042±228, 1078±233, and 1110±268 W, respectively, mean power (p=0.38, or fatigue index (p=0.15. A significantly better (p=0.01 perceived recovery was observed after LBV (6±1 and LBVC (6±1 compared to CON (4±1. The study findings support psychological but not performance enhancing benefits after the use of LBV and LBVC as recovery methods.

  10. Application of a precipitation method for uranium recovery from Abu-Zaabal phosphoric acid plant, egypt

    International Nuclear Information System (INIS)

    El-Hazek, N.M.T.; Hussein, E.M.

    1997-01-01

    Current industrial recovery of uranium from 30% phosphoric acid-produced by the dihydrate process-is based on solvent extraction method. Uranium recovery from concentrated phosphoric acid (45-52% P 2 O 5 ) produced by evaporation of the 30% acid or directly produced by the hemihydrate process, by solvent extraction is difficult to apply in practice. In addition to possible contamination of the acid by the organic solvents and/or their deterioration. This paper investigates the possibility of applying a precipitation method (Weterings and Janssen, 1985) for uranium recovery from both low (28% P 2 O 2 ) and high (48% P 2 O 5 ) concentration phosphoric acids produced by abu-Zaabal phosphoric acid plant (abu-Zaabal fertilizers and chemicals Co., Egypt). The 28% acid produced by H 2 SO 4 dihydrate method and the 48% acid produced by evaporation of the 28% acid

  11. Stress recovery techniques for natural element method in 2-D solid mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Jin Rae [Dept. of Naval Architecture and Ocean Engineering, Hongik University, Sejong (Korea, Republic of)

    2016-11-15

    This paper is concerned with the stress recovery for the natural element method in which the problem domain is discretized with Delaunay triangles and the structural behavior is approximated with Laplace interpolation functions. Basically, the global and local patch recovery techniques based on the L2-projection method are adopted. For the local patch recovery, the local element patches are defined by the supports of each Laplace interpolation function. For the comparison purpose, the local stress recovery is also performed using Lagrange-type basis functions that are used for 3- and 6-node triangular elements. The stresses that are recovered by the present global and local recovery techniques are compared each other and compared with the available analytic solution, in terms of their spatial distributions and the convergence rates. As well, the dependence of the recovered stress field on the type of test basis functions that are used forbnov-Galerkin (BG) and Petrov-Galerkin (PG) natural element methods is also investigated.

  12. Influence of recovery method and centrifugation on epididymal sperm from collared peccaries (Pecari tajacu Linnaeus, 1758).

    Science.gov (United States)

    Bezerra, José Artur Brilhante; da Silva, Andréia Maria; Peixoto, Gislayne Christianne Xavier; da Silva, Mariana de Araújo; Franco de Oliveira, Moacir; Silva, Alexandre Rodrigues

    2014-05-01

    In order to establish protocols for gamete recovery from accidentally killed wild animals, or to take advantage of those slaughtered by captive breeders, we assess the influence of two methods on the recovery of epididymal sperm from collared peccaries, and verify the effect of centrifugation on such gametes. Genitalia from nine animals were used. For each animal, one epididymis was processed by flotation and the other was processed by retrograde flushing, both using a buffered media based on Tris. Following recovery, sperm were evaluated for motility, vigor, viability, functional membrane integrity, and morphology. A 1-mL aliquot of each sample was centrifuged, the supernatant removed, and the pellet suspended and evaluated as fresh samples. The sperm characteristics did not differ between the samples collected by flotation or retrograde flushing (P methods was affected by centrifugation. In conclusion, epididymal sperm from collared peccaries can be efficiently collected through flotation or retrograde flushing, but not when either is followed by centrifugation.

  13. Enhanced oil recovery using improved aqueous fluid-injection methods: an annotated bibliography. [328 citations

    Energy Technology Data Exchange (ETDEWEB)

    Meister, M.J.; Kettenbrink, G.K.; Collins, A.G.

    1976-10-01

    This annotated bibliography contains abstracts, prepared by the authors, of articles published between 1968 and early 1976 on tests of improved aqueous fluid injection methods (i.e., polymer and surfactant floods). The abstracts have been written and organized to facilitate studies of the oil recovery potential of polymer and surfactant floods under known reservoir conditions. 328 citations.

  14. A method for studying post-fledging survival rates using data from ringing recoveries

    NARCIS (Netherlands)

    Thomson, D.L.; Baillie, S.R.; Peach, W.J.

    1999-01-01

    We present a method for studying post-fledging survival rates from data on national ringing recoveries. The approach extends the classical two-age-class models of Brownie et al. (1985) to include a third age-class of birds ringed as nestlings. The models can incorporate age-class-specific and

  15. Post-match recovery methods used by U19 and U21 provincial ...

    African Journals Online (AJOL)

    The aim of the study was to identify the most preferred post-match recovery methods utilized by U19 and U21 provincial rugby union players (n=97; Mean age: ± 20.2 years) in Gauteng Province of South Africa. Questionnaire-based data were collected from a purposive sample size of 97 rugby players. The findings ...

  16. Comparison of methods for determining the hydrologic recovery time after forest disturbance

    Science.gov (United States)

    Oda, T.; Green, M.; Ohte, N.; Urakawa, R.; Endo, I.; Scanlon, T. M.; Sebestyen, S. D.; McGuire, K. J.; Katsuyama, M.; Fukuzawa, K.; Tague, C.; Hiraoka, M.; Fukushima, K.; Giambelluca, T. W.

    2013-12-01

    Changes in forest hydrology changes after forest disturbance vary among catchments. Although studies have summarized the initial runoff changes following forest disturbance, the estimates of long-term recovery time are less frequently reported. To understand the mechanisms of long-term recovery processes and to predict the long-term changes in streamflow after forest disturbance, it is important to compare recovery times after disturbance. However, there is no clear consensus regarding the best methodology for such research, especially for watershed studies that were not designed as paired watersheds. We compared methods of determining the hydrologic recovery time to determine if there is a common method for sites in any hydroclimatic setting. We defined the hydrologic recovery time to be the time of disturbance to the time when hydrological factors first recovered to pre-disturbance levels. We acquired data on long-term rainfall and runoff at 16 sites in northeastern USA and Japan that had at least 10 years (and up to 50 years) of post disturbance data. The types of disturbance include harvesting, diseases and insect damages. We compared multiple indices of hydrological response including annual runoff, annual runoff ratio (annual runoff/annual rainfall), annual loss (annual rainfall-annual runoff), fiftieth-percentile annual flow, and seasonal water balance. The results showed that comparing annual runoff to a reference site was most robust at constraining the recovery time, followed by using pre-disturbance data as reference data and calculating the differences in annual runoff from pre-disturbance levels. However, in case of small disturbance at sites without reference data or long-term pre-disturbance data, the inter-annual variation of rainfall makes the effect of disturbance unclear. We found that annual loss had smaller inter-annual variation, and defining recovery time with annual loss was best in terms of matching the results from paired watersheds. The

  17. New method for evaluating effective recovery time and single photoelectron response in silicon photomultipliers

    Energy Technology Data Exchange (ETDEWEB)

    Grodzicka, Martyna, E-mail: m.grodzicka@ncbj.gov.pl; Szczęśniak, Tomasz; Moszyński, Marek; Szawłowski, Marek; Grodzicki, Krystian

    2015-05-21

    The linearity of a silicon photomultiplier (SiPM) response depends on the number of APD cells and its effective recovery time and it is related to the intensity and duration of the detected light pulses. The aim of this study was to determine the effective recovery time on the basis of the measured SiPM response to light pulses of different durations. A closer analysis of the SiPM response to the light pulses shorter than the effective recovery time of APD cells led to a method for the evaluation of the single photoelectron response of the devices where the single photoelectron peak cannot be clearly measured. This is necessary in the evaluation of the number of fired APD cells (or the number of photoelectrons) in measurements with light pulses of various durations. Measurements were done with SiPMs manufactured by two companies: Hamamatsu and SensL.

  18. Combined geophysical methods for mapping infiltration pathways at the Aurora Water Aquifer recharge and recovery site

    Science.gov (United States)

    Jasper, Cameron A.

    Although aquifer recharge and recovery systems are a sustainable, decentralized, low cost, and low energy approach for the reclamation, treatment, and storage of post- treatment wastewater, they can suffer from poor infiltration rates and the development of a near-surface clogging layer within infiltration ponds. One such aquifer recharge and recovery system, the Aurora Water site in Colorado, U.S.A, functions at about 25% of its predicted capacity to recharge floodplain deposits by flooding infiltration ponds with post-treatment wastewater extracted from river bank aquifers along the South Platte River. The underwater self-potential method was developed to survey self-potential signals at the ground surface in a flooded infiltration pond for mapping infiltration pathways. A method for using heat as a groundwater tracer within the infiltration pond used an array of in situ high-resolution temperature sensing probes. Both relatively positive and negative underwater self-potential anomalies are consistent with observed recovery well pumping rates and specific discharge estimates from temperature data. Results from electrical resistivity tomography and electromagnetics surveys provide consistent electrical conductivity distributions associated with sediment textures. A lab method was developed for resistivity tests of near-surface sediment samples. Forward numerical modeling synthesizes the geophysical information to best match observed self- potential anomalies and provide permeability distributions, which is important for effective aquifer recharge and recovery system design, and optimization strategy development.

  19. Optimization of the purification methods for recovery of recombinant growth hormone from Paralichthys olivaceus

    Science.gov (United States)

    Zang, Xiaonan; Zhang, Xuecheng; Mu, Xiaosheng; Liu, Bin

    2013-03-01

    This study aimed to optimize the purification of recombinant growth hormone from Paralichthys olivaceus. Recombinant flounder growth hormone (r-fGH) was expressed by Escherichia coli in form of inclusion body or as soluble protein under different inducing conditions. The inclusion body was renatured using two recovery methods, i.e., dilution and dialysis. Thereafter, the refolded protein was purified by Glutathione Sepharase 4B affinity chromatography and r-fGH was obtained by cleavage of thrombin. For soluble products, r-fGH was directly purified from the lysates by Glutathione Sepharase 4B affinity chromatography. ELISA-receptor assay demonstrated that despite its low receptor binding activity, the r-fGH purified from refolded inclusion body had a higher yield (2.605 mg L-1) than that from soluble protein (1.964 mg L-1). Of the tested recovery methods, addition of renaturing buffer (pH 8.5) into denatured inclusion body yielded the best recovery rate (17.9%). This work provided an optimized purification method for high recovery of r-fGH, thus contributing to the application of r-fGH to aquaculture.

  20. Simulation Opportunity Index, A Simple and Effective Method to Boost the Hydrocarbon Recovery

    KAUST Repository

    Saputra, Wardana

    2016-01-01

    This paper describes how the SOI software helps as a simple, fast, and accurate way to obtain the higher hydrocarbon production than that of trial-error method and previous studies in two different fields located in offshore Indonesia. On one hand, the proposed method could save money by minimizing the required number of wells. On the other hand, it could maximize profit by maximizing recovery.

  1. Application of a precipitation method for uranium recovery from abu-zaabal phosphoric acid plant, Egypt

    International Nuclear Information System (INIS)

    El-hazek, N.M.T.; Hussein, E.M.

    1995-01-01

    Current industrial recovery of uranium from 30% phosphoric acid-produced by the dihydrate process-is based on solvent extraction method. Uranium recovery from concentrated phosphoric acid (45-52% p o5 ) produced by evaporation of the 30% acid or directly produced by the hemihydrate process, by solvent extraction is difficult to apply in practice. In addition to possible contamination of the acid by the organic solvents and/or their deterioration. This paper investigates the possibility of applying a precipitation method (Weterings and Janssen, 1985) for uranium recovery from both low (28% P 2 O 5 ) and high (48% P 2 O 5 ) concentration phosphoric acids produced by abu-zaabal phosphoric acid plant (Abuzaabal fertilizers and chemicals Co., Egypt). The 28% acid produced by H 2 SO 4 dihydrate method and the 48% acid produced by evaporation of the 28% acid The applied precipitation method depends on using NH 4 F as a uranium precipitant from both low and high concentration phosphoric acids in presence of acetone as a dispersing agent. All the relevant factors have been studied

  2. Heat Recovery from High Temperature Slags: A Review of Chemical Methods

    Directory of Open Access Journals (Sweden)

    Yongqi Sun

    2015-03-01

    Full Text Available Waste heat recovery from high temperature slags represents the latest potential way to remarkably reduce the energy consumption and CO2 emissions of the steel industry. The molten slags, in the temperature range of 1723–1923 K, carry large amounts of high quality energy. However, the heat recovery from slags faces several fundamental challenges, including their low thermal conductivity, inside crystallization, and discontinuous availability. During past decades, various chemical methods have been exploited and performed including methane reforming, coal and biomass gasification, and direct compositional modification and utilization of slags. These methods effectively meet the challenges mentioned before and help integrate the steel industry with other industrial sectors. During the heat recovery using chemical methods, slags can act as not only heat carriers but also as catalysts and reactants, which expands the field of utilization of slags. Fuel gas production using the waste heat accounts for the main R&D trend, through which the thermal heat in the slag could be transformed into high quality chemical energy in the fuel gas. Moreover, these chemical methods should be extended to an industrial scale to realize their commercial application, which is the only way by which the substantial energy in the slags could be extracted, i.e., amounting to 16 million tons of standard coal in China.

  3. Method selection for sustainability assessments: The case of recovery of resources from waste water.

    Science.gov (United States)

    Zijp, M C; Waaijers-van der Loop, S L; Heijungs, R; Broeren, M L M; Peeters, R; Van Nieuwenhuijzen, A; Shen, L; Heugens, E H W; Posthuma, L

    2017-07-15

    Sustainability assessments provide scientific support in decision procedures towards sustainable solutions. However, in order to contribute in identifying and choosing sustainable solutions, the sustainability assessment has to fit the decision context. Two complicating factors exist. First, different stakeholders tend to have different views on what a sustainability assessment should encompass. Second, a plethora of sustainability assessment methods exist, due to the multi-dimensional characteristic of the concept. Different methods provide other representations of sustainability. Based on a literature review, we present a protocol to facilitate method selection together with stakeholders. The protocol guides the exploration of i) the decision context, ii) the different views of stakeholders and iii) the selection of pertinent assessment methods. In addition, we present an online tool for method selection. This tool identifies assessment methods that meet the specifications obtained with the protocol, and currently contains characteristics of 30 sustainability assessment methods. The utility of the protocol and the tool are tested in a case study on the recovery of resources from domestic waste water. In several iterations, a combination of methods was selected, followed by execution of the selected sustainability assessment methods. The assessment results can be used in the first phase of the decision procedure that leads to a strategic choice for sustainable resource recovery from waste water in the Netherlands. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. The Train Driver Recovery Problem - Solution Method and Decision Support System Framework

    DEFF Research Database (Denmark)

    Rezanova, Natalia Jurjevna

    2009-01-01

    the proposed model and solution method is suitable for solving in real-time. Recovery duties are generated as resource constrained paths in duty networks, and the set partitioning problem is solved with a linear programming based branch-and-price algorithm. Dynamic column generation and problem space expansion...... driver decision support system in their operational environment. Besides solving a particular optimization problem, this thesis contributes with a description of the railway planning process, tactical crew scheduling and the real-time dispatching solutions, taking a starting point in DSB S....... Rezanova NJ, Ryan DM. The train driver recovery problem–A set partitioning based model and solution method. Computers and Operations Research, in press, 2009. doi: 10.1016/j.cor.2009.03.023. 2. Clausen J, Larsen A, Larsen J, Rezanova NJ. Disruption management in the airline industry–Concepts, models...

  5. Lessons from comparative effectiveness research methods development projects funded under the Recovery Act.

    Science.gov (United States)

    Zurovac, Jelena; Esposito, Dominick

    2014-11-01

    The American Recovery and Reinvestment Act of 2009 (ARRA) directed nearly US$29.2 million to comparative effectiveness research (CER) methods development. To help inform future CER methods investments, we describe the ARRA CER methods projects, identify barriers to this research and discuss the alignment of topics with published methods development priorities. We used several existing resources and held discussions with ARRA CER methods investigators. Although funded projects explored many identified priority topics, investigators noted that much work remains. For example, given the considerable investments in CER data infrastructure, the methods development field can benefit from additional efforts to educate researchers about the availability of new data sources and about how best to apply methods to match their research questions and data.

  6. Seepage characteristics of the second tertiary combined model

    Directory of Open Access Journals (Sweden)

    Huan ZHAO

    2015-08-01

    Full Text Available The second tertiary combined model experiment zone has been developed in Block B, Field L. The percolation feature of the second tertiary combined develop model shows great importance to rational and efficient development of the reservoir. In order to clearly illuminate its percolation feature, the typical reservoir numerical model is built by Eclipse, which is a reservoir numerical simulation software. The percolation features of original and added perforation interval under the second tertiary combined model are studied, and the variation features of general water-cut, recovery percentage, wellbore pressure, reservoir pressure and water saturation on condition of higher injection rate under the second tertiary combined model are analyzed. The research indicates that the second tertiary combined enhances the recovery of remaining oil on top of thick reservoir by developing and enhancing original perforation interval under water drive, then improves development results by polymer flooding, and gains higher recovery rate by synthetic action of water driver and polymer flooding.

  7. Disintegration-wave method of recovery of industrial waste iron and steel industry enterprises

    Directory of Open Access Journals (Sweden)

    M. A. Vasechkin

    2016-01-01

    Full Text Available Rational use of raw materials and waste is one of the most important factors determining the effectiveness of any processing enterprise. Industrial wastes of mining and metallurgical industries are a valuable source of many elements. However, little activity of the mineral and inconsistent chemical and phase composition of the waste reduce their attractiveness for use as a secondary raw material, and the presence of heavy metals and water-soluble compounds is a serious environmental threat. Fractional excretion of elements that make up the slag can be carried out with the help of their recovery by disintegration-wave method. The paper presents a machine-hardware circuits for the implementation of recovery process of slag and disintegrator design. In conducting research on the example of slag samples of the enterprises in Stavropol and Krasnoyarsk territories, it was found out that the observed enrichment of slags on the composition of iron takes place, its physical and chemical activity increases and persists for a long period of time. These facts were noted in the study of the microstructure and the results of spectral analysis of the initial slags and subjected to recovery by disintegration-wave method. The results analysis led to the conclusion about the possibility of waste recovery of mining and metallurgical industries with by disintegration-wave method. Resulting in the processing materials with enhanced activity of the mineral part and certain chemical and phase composition, can be used as raw material for the production of metallurgical, cement and other industries.

  8. Play-level distributions of estimates of recovery factors for a miscible carbon dioxide enhanced oil recovery method used in oil reservoirs in the conterminous United States

    Science.gov (United States)

    Attanasi, E.D.; Freeman, P.A.

    2016-03-02

    In a U.S. Geological Survey (USGS) study, recovery-factor estimates were calculated by using a publicly available reservoir simulator (CO2 Prophet) to estimate how much oil might be recovered with the application of a miscible carbon dioxide (CO2) enhanced oil recovery (EOR) method to technically screened oil reservoirs located in onshore and State offshore areas in the conterminous United States. A recovery factor represents the percentage of an oil reservoir’s original oil in place estimated to be recoverable by the application of a miscible CO2-EOR method. The USGS estimates were calculated for 2,018 clastic and 1,681 carbonate candidate reservoirs in the “Significant Oil and Gas Fields of the United States Database” prepared by Nehring Associates, Inc. (2012).

  9. The Train Driver Recovery Problem - a Set Partitioning Based Model and Solution Method

    DEFF Research Database (Denmark)

    Rezanova, Natalia Jurjevna; Ryan, David

    2010-01-01

    The need to recover a train driver schedule occurs during major disruptions in the daily railway operations. Based on data from the Danish passenger railway operator DSB S-tog A/S, a solution method to the train driver recovery problem (TDRP) is developed. The TDRP is formulated as a set...... branching strategy using the depth-first search of the Branch & Bound tree. The LP relaxation of the TDRP possesses strong integer properties. We present test scenarios generated from the historical real-life operations data of DSB S-tog A/S. The numerical results show that all but one tested instances...... partitioning problem. We define a disruption neighbourhood by identifying a small set of drivers and train tasks directly affected by the disruption. Based on the disruption neighbourhood, the TDRP model is formed and solved. If the TDRP solution provides a feasible recovery for the drivers within...

  10. A method for seedling recovery in Jatropha curcas after cryogenic exposure of the seeds.

    Science.gov (United States)

    Silva, Rafael de C; Camillo, Julcéia; Scherwinski-Pereira, Jonny E

    2012-03-01

    Actually, the germplasm of Jatropha spp. is conserved as whole plants in field collections. Under this storage method, the genetic resources are exposed to disease, pest and natural hazards such as human error, drought and weather damage. Besides, field genebanks are costly to maintain and with important requirements of trained personnel. Thus, the development of efficient techniques to ensure its safe conservation and regeneration is therefore of paramount importance. In this work we describe a method for Jatropha curcas seeds cryoexposure and seedling recovery after thawed. In a first experiment, an efficient protocol for in vitro plant recovery was carried out using zygotic embryo or seeds with or without coat. In a second experiment, desiccated seeds with or without coat were exposed to liquid nitrogen and evaluated after cryoexposure. Germination percentages were variable among treatments, and seeds demonstrated tolerance to liquid nitrogen exposure under certain conditions. Seeds of J. curcas presented up to 99.6% germination after seed coat removal. Seeds with coat cultured in vitro did not germinate, and were 60% contaminated. The germination of the zygotic embryos was significantly higher in the 1/2 MS medium (93.1%) than in WPM medium (76.2%), but from zygotic embryo, abnormal seedlings reached up to 99%. Seeds with coat exposed to liquid nitrogen showed 60% germination in culture after coat removal with good plant growth, and seeds cryopreserved without coat presented 82% germination, but seedlings showed a reduced vigor and a significant increase in abnormal plants. Seeds cultured in vitro with coat did not germinate, independently of cryoexposure or not. This study reports the first successful in vitro seedling recovery methodology for Jatropha curcas seeds, after a cryopreservation treatment, and is recommended as an efficient procedure for in vitro plant recovery, when seeds are conserved in germplasm banks by low or cryotemperatures.

  11. A method for seedling recovery in Jatropha curcas after cryogenic exposure of the seeds

    Directory of Open Access Journals (Sweden)

    Rafael de C. Silva

    2012-03-01

    Full Text Available Actually, the germplasm of Jatropha spp. is conserved as whole plants in field collections. Under this storage method, the genetic resources are exposed to disease, pest and natural hazards such as human error, drought and weather damage. Besides, field genebanks are costly to maintain and with important requirements of trained personnel. Thus, the development of efficient techniques to ensure its safe conservation and regeneration is therefore of paramount importance. In this work we describe a method for Jatropha curcas seeds cryoexposure and seedling recovery after thawed. In a first experiment, an efficient protocol for in vitro plant recovery was carried out using zygotic embryo or seeds with or without coat. In a second experiment, desiccated seeds with or without coat were exposed to liquid nitrogen and evaluated after cryoexposure. Germination percentages were variable among treatments, and seeds demonstrated tolerance to liquid nitrogen exposure under certain conditions. Seeds of J. curcas presented up to 99.6% germination after seed coat removal. Seeds with coat cultured in vitro did not germinate, and were 60% contaminated. The germination of the zygotic embryos was significantly higher in the ½ MS medium (93.1% than in WPM medium (76.2%, but from zygotic embryo, abnormal seedlings reached up to 99%. Seeds with coat exposed to liquid nitrogen showed 60% germination in culture after coat removal with good plant growth, and seeds cryopreserved without coat presented 82% germination, but seedlings showed a reduced vigor and a significant increase in abnormal plants. Seeds cultured in vitro with coat did not germinate, independently of cryoexposure or not. This study reports the first successful in vitro seedling recovery methodology for Jatropha curcas seeds, after a cryopreservation treatment, and is recommended as an efficient procedure for in vitro plant recovery, when seeds are conserved in germplasm banks by low or cryotemperatures.

  12. ISS Contingency Attitude Control Recovery Method for Loss of Automatic Thruster Control

    Science.gov (United States)

    Bedrossian, Nazareth; Bhatt, Sagar; Alaniz, Abran; McCants, Edward; Nguyen, Louis; Chamitoff, Greg

    2008-01-01

    In this paper, the attitude control issues associated with International Space Station (ISS) loss of automatic thruster control capability are discussed and methods for attitude control recovery are presented. This scenario was experienced recently during Shuttle mission STS-117 and ISS Stage 13A in June 2007 when the Russian GN&C computers, which command the ISS thrusters, failed. Without automatic propulsive attitude control, the ISS would not be able to regain attitude control after the Orbiter undocked. The core issues associated with recovering long-term attitude control using CMGs are described as well as the systems engineering analysis to identify recovery options. It is shown that the recovery method can be separated into a procedure for rate damping to a safe harbor gravity gradient stable orientation and a capability to maneuver the vehicle to the necessary initial conditions for long term attitude hold. A manual control option using Soyuz and Progress vehicle thrusters is investigated for rate damping and maneuvers. The issues with implementing such an option are presented and the key issue of closed-loop stability is addressed. A new non-propulsive alternative to thruster control, Zero Propellant Maneuver (ZPM) attitude control method is introduced and its rate damping and maneuver performance evaluated. It is shown that ZPM can meet the tight attitude and rate error tolerances needed for long term attitude control. A combination of manual thruster rate damping to a safe harbor attitude followed by a ZPM to Stage long term attitude control orientation was selected by the Anomaly Resolution Team as the alternate attitude control method for such a contingency.

  13. Effect of method of N-application and modified urea on N-15 recovery by rice

    International Nuclear Information System (INIS)

    Soliman, S.M.; Abdelmonem, M.A.S.

    1995-01-01

    Rice is a very responsive crop to nitrogen fertilizer, but the efficiency of the applied N-fertilizer is low. Greenhouse experiment conducted to evaluate several methods to improve fertilizer efficiency and reduce N-losses in rice fields. N-15 labelled urea was applied to 10 kg soils in pots, urea was applied alone, with addition of two urease inhibitors (NBPT and HQ), with addition of nitrification inhibitor (DCD),or with the combination of both inhibitors. The fertilizers were applied either broadcast on soil surface or at depth of 8 cm below the surface. At maturity, plants were separated into grain and straw, dried and weighted. Soil and plant samples were analyzed for total N and N-15 excess. Both fertilizer placement and inhibitor application significantly increased straw and grain yield, as well as N-uptake. Nitrogen derived from fertilizer (%Ndff) was more than doubled, when urea was applied deep and in combination with inhibitors. Plant recovery of N-15 labelled urea ranged from 17% to 75% according to treatment. Regardless of inhibitors application, plant recovery was increased from 39% to 65% when urea was applied at depth of 8 cm. Approximately 2/3 of the applied urea (64%)was lost when urea was applied alone. Those losses were reduced down to 12% with deep placement and inhibitor application. The two management practices show significant effect on minimizing N-losses and increasing plant recovery. 1 fig., 3 tabs

  14. Effect of method of N-application and modified urea on N-15 recovery by rice

    Energy Technology Data Exchange (ETDEWEB)

    Soliman, S M; Abdelmonem, M A.S. [Soil and Water Dept., Atomic Energy Auth., Cairo, (Egypt)

    1995-10-01

    Rice is a very responsive crop to nitrogen fertilizer, but the efficiency of the applied N-fertilizer is low. Greenhouse experiment conducted to evaluate several methods to improve fertilizer efficiency and reduce N-losses in rice fields. N-15 labelled urea was applied to 10 kg soils in pots, urea was applied alone, with addition of two urease inhibitors (NBPT and HQ), with addition of nitrification inhibitor (DCD),or with the combination of both inhibitors. The fertilizers were applied either broadcast on soil surface or at depth of 8 cm below the surface. At maturity, plants were separated into grain and straw, dried and weighted. Soil and plant samples were analyzed for total N and N-15 excess. Both fertilizer placement and inhibitor application significantly increased straw and grain yield, as well as N-uptake. Nitrogen derived from fertilizer (%Ndff) was more than doubled, when urea was applied deep and in combination with inhibitors. Plant recovery of N-15 labelled urea ranged from 17% to 75% according to treatment. Regardless of inhibitors application, plant recovery was increased from 39% to 65% when urea was applied at depth of 8 cm. Approximately 2/3 of the applied urea (64%)was lost when urea was applied alone. Those losses were reduced down to 12% with deep placement and inhibitor application. The two management practices show significant effect on minimizing N-losses and increasing plant recovery. 1 fig., 3 tabs.

  15. Characteristic of wet method of phosphorus recovery from polish sewage sludge ash with nitric acid

    Directory of Open Access Journals (Sweden)

    Gorazda Katarzyna

    2016-01-01

    Full Text Available Sewage Sludge Ash (SSA is a concentrated source of phosphorus and can be successfully recycled via a number of different routes. This paper presents research results on phosphorus recovery from differently combusted sewage sludge with the use of nitric acid extraction. Different SSA forms from Polish thermal utilization stations were compared. It was revealed that sewage treatment technology as well as combustion technology influence many physical and chemical parameters of ashes that are crucial for further phosphorus recovery from such waste according to the proposed method. Presented research defines extraction efficiency, characterized extracts composition and verifies the possibility of using SSA as cheaper and alternative sources of phosphorus compounds. Gdynia, Kielce and Kraków SSA have the best properties for the proposed technology of phosphorus recovery with high extraction efficiency greater than 86%. Unsuitable results were obtained for Bydgoszcz, Szczecin Slag and Warszawa SSA. Extraction process for Łódź and Szczecin Dust SSA need to be improved for a higher phosphorus extraction efficiency greater than 80%.

  16. Residual nitrogen-15 recovery by corn as influenced by tillage and fertilization method

    International Nuclear Information System (INIS)

    Timmons, D.R.; Cruse, R.M.

    1991-01-01

    Tillage systems that create different surface residue conditions may also affect the recovery of residual fertilizer N during subsequent growing seasons. This study evaluated the recovery of residual labeled N fertilizer in the soil by corn (Zea mays L.) for two tillage systems and two fertilization methods. Five atom % 15 N-enriched 28% urea-ammonium nitrate solution (UAN) at 224 kg N ha -1 was either surface-applied in the fall before any primary tillage or banded (knifed in) just before planting in the spring. Continuous corn was grown with either fall moldboard-plow (MP) or ridge-till (RT) systems. After the initial growing season, the recovery of residual labeled N in the soil by corn was determined for three consecutive growing seasons, and the soil profile was sampled periodically to measure residual 15 N in the organic and inorganic pools. One year after labeled UAN application, from 16 to 27% of the initial 15 N applied was found in the organic N pool and only 1% as inorganic N[NH 4 +(NO 2 +NO 3 )-N]. After four seasons, residual 15 N in the organic N pool ranged from 13 to 24%. Less than 0.5% remained as inorganic N. Regression analyses indicated that about 5 kg 15 N ha -1 year -1 became available for both MP and RT systems with banded N, so the amounts were small. Total residual 15 N recovery by corn grain plus stover for three seasons ranged from 1.7 to 3.5%, and was greatest for spring-banded fertilizer. Because the amounts of residual 15 N utilized were too small to affect corn growth, this N source appears to be negligible when considering corn-N needs

  17. Development of {sup 99m}Tc extraction-recovery by solvent extraction method

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Akihiro; Nishikata, Kaori; Izumo, Hironobu; Tsuchiya, Kunihiko; Ishihara, Masahiro [Japan Atomic Energy Agency, Oarai Research and Development Center, Oarai, Ibaraki (Japan); Tanase, Masakazu; Fujisaki, Saburo; Shiina, Takayuki; Ohta, Akio; Takeuchi, Nobuhiro [Chiyoda Technol Corp., Tokyo (Japan)

    2012-03-15

    {sup 99m}Tc is used as a radiopharmaceutical in the medical field for the diagnosis, and manufactured from {sup 99}Mo, the parent nuclide. In this study, the solvent extraction with MEK was selected, and preliminary experiments were carried out using Re instead of {sup 99m}Tc. Two tests were carried out in the experiments; the one is the Re extraction test with MEK from Re-Mo solution, the other is the Re recovery test from the Re-MEK. As to the Re extraction test, and it was clear that the Re extraction yield was more than 90%. Two kinds of Re recovery tests, which are an evaporation method using the evaporator and an adsorption/elution method using the alumina column, were carried out. As to the evaporation method, the Re concentration in the collected solution increased more than 150 times. As to the adsorption/elution method, the Re concentration increased in the eluted solution more than 20 times. (author)

  18. Effect of Physical Methods of Lymphatic Drainage on Postexercise Recovery of Mixed Martial Arts Athletes.

    Science.gov (United States)

    Zebrowska, Aleksandra; Trybulski, Robert; Roczniok, Robert; Marcol, Wieslaw

    2017-08-16

    Physical methods are reported to be important for accelerating skeletal muscle regeneration, decreasing muscle soreness, and shortening of the recovery time. The aim of the study was to assess the effect of the physical methods of lymphatic drainage (PMLD) such as manual lymphatic drainage (MLD), the Bodyflow (BF) therapy, and lymphatic drainage by deep oscillation (DO) on postexercise regeneration of the forearm muscles of mixed martial arts (MMA) athletes. Eighty MMA athletes aged 27.5 ± 6.4 years were allocated to 4 groups: MLD, the BF device, DO therapy, and the control group. Blood flow velocity in the cephalic vein was measured with the ultrasound Doppler velocity meter. Maximal strength of the forearm muscles (Fmax), muscle tissue tension, pain threshold, blood lactate concentration (LA), and activity of creatine kinase were measured in all groups at rest, after the muscle fatigue test (post-ex) and then 20 minutes, 24, and 48 hours after the application of PMLD. The muscle fatigue test reduced Fmax in all subjects, but in the groups receiving MLD, DO, and BF significantly higher Fmax was observed at recovery compared with post-ex values. The application of MDL reduced the postexercise blood LA and postexercise muscle tension. The lymphatic drainage methods, whether manual or using electro-stimulation and DO, improve postexercise regeneration of the forearm muscles of MMA athletes. The methods can be an important element of therapeutic management focused on optimizing training effects and reducing the risk of injuries of the combat sports athletes.

  19. Simulation Opportunity Index, A Simple and Effective Method to Boost the Hydrocarbon Recovery

    KAUST Repository

    Saputra, Wardana

    2016-09-08

    During periods of low oil prices, profitability of field developments drops drastically. To help with this difficulty, a cost-effective method has been proposed to boost the hydrocarbon recovery by optimizing well locations through the Simulated Opportunity Index (SOI). SOI is an intelligent method to identify zones with high potential for production which is empirically calculated from basic rock and fluid properties, and from reservoir pressure as its energy capacity. In order to obtain the best results, the original SOI formula (Molina et al., 2009) was extended to both oil and gas fields. Based on this modified SOI formula, a software program has been developed to locate the best well locations considering multilayer, existing wells, and fault existences. This paper describes how the SOI software helps as a simple, fast, and accurate way to obtain the higher hydrocarbon production than that of trial-error method and previous studies in two different fields located in offshore Indonesia. On one hand, the proposed method could save money by minimizing the required number of wells. On the other hand, it could maximize profit by maximizing recovery.

  20. Solvent effects on the magnetic shielding of tertiary butyl alcohol

    African Journals Online (AJOL)

    )4 and tetramethyl ammonium cation N(CH3)4(+) have also been presented. KEY WORDS: Solvent effects, Magnetic shielding, Tertiary butyl alcohol, Tertiary butyl amine, Continuum solvation calculations, Chemical shift estimation methods

  1. Recovery of Lithium From Geothermal Fluid at Lumpur Sidoarjo by Adsorption Method

    OpenAIRE

    Noerochim, Lukman; Satriawangsa, Gita Akbar; Widodo, Amien

    2016-01-01

    The recovery of lithium from geothermal fluid at Lumpur Sidoarjo, Indonesia was investigated employing an adsorption method with polymer membrane as container. The lithium concentration in geothermal fluid from Lumpur Sidoarjo used in the present study was about 5 mg/l. Lithium manganese oxide (LMO) was selected as a promising adsorbent material due to its non-toxic, topotactical behavior and low cost. In this study, LMO with single Li/Mn mole ratio was prepared, i.e. Li1.6Mn1.6O4. The adsorb...

  2. Recovery of Americium-241 from lightning rod by the method of chemical treatment

    International Nuclear Information System (INIS)

    Cruz, W.H.

    2013-01-01

    About 95% of the lightning rods installed in the Peruvian territory have set in their structures, pose small amounts of radioactive sources such as Americium-241 ( 241 Am), fewer and Radium 226 ( 226 Ra) these are alpha emitters and have a half life of 432 years and 1600 years respectively. In this paper describes the recovery of radioactive sources of 241 Am radioactive lightning rods using the conventional chemical treatment method using agents and acids to break down the slides. The 241 Am recovered was as excitation source and alpha particle generator for analysing samples by X Ray Fluorescence, for fixing the stainless steel 241 Am technique was used electrodeposition. (author)

  3. The Train Driver Recovery Problem - a Set Partitioning Based Model and Solution Method

    DEFF Research Database (Denmark)

    Rezanova, Natalia Jurjevna; Ryan, David

    The need to recover a train driver schedule occurs during major disruptions in the daily railway operations. Using data from the train driver schedule of the Danish passenger railway operator DSB S-tog A/S, a solution method to the Train Driver Recovery Problem (TDRP) is developed. The TDRP...... the depth-first search of the Branch & Bound tree. Preliminarily results are encouraging, showing that nearly all tested real-life instances produce integer solutions to the LP relaxation and solutions are found within a few seconds....

  4. Recovery concept in a Norwegian setting to be examined by the assertive community treatment model and mixed methods.

    Science.gov (United States)

    Lofthus, Ann-Mari; Westerlund, Heidi; Bjørgen, Dagfinn; Lindstrøm, Jonas Christoffer; Lauveng, Arnhild; Rose, Diana; Ruud, Torleif; Heiervang, Kristin

    2018-02-01

    Recovery is a crucial concept in the mental health field. The research of recovery is split into the categories of personal, social and clinical recovery. The purpose of this study was to explore the fragmented concept of recovery in light of assertive community treatment (ACT) in Norway. The study has a mixed methods design with a pragmatic approach. The Questionnaire about the Process of Recovery and open-ended questions posed to 70 participants from 12 ACT teams in Norway, gathered by the "Users interview users" method, are combined with interviews or focus groups with eight of these participants. Surprisingly those under a community treatment order (CTO) report the highest degree of personal recovery. The qualitative material shows that the service users interpreted the concept of recovery differently than researchers and professionals. The ACT service users highlighted three important elements: flexible treatment, medication and access to a car. They emphasized the necessity for basic needs to be met in order to experience a meaningful recovery process, and these basic needs may be of even greater importance to those under CTOs. Their experiences should imply a greater emphasis on securing basic needs such as secure housing, sounder finances and access to the normal benefits offered by society. © 2016 Australian College of Mental Health Nurses Inc.

  5. Uranium accompanying recovery from copper ores

    International Nuclear Information System (INIS)

    Golynko, Z.Sh.; Laskorin, B.N.

    1981-01-01

    In the search for new raw material sources for nuclear power engineering a review of the technique of uranium accompaning recovery from copper ores reprocessing products in some countries is presented. In the USA a sorption method of uranium extraction by means of strongly basic ion exchange resins from solutions upon copper case- hardening with subsequent extraction from eluates by solutions of tertiary amines is realized. Elution is realized with sulphuric acid. In South Africa an extraction reprocessing of gravitational concentrate extracted from copper sulphide flotation tailings is organized. In India the uranium extraction from copper ores flotation enrichment tailings is organized on a commerical scale. Presented are data on the scale of uranium recovery, various conditions of its recovery as well as block diagrams of the processes. It is shown that copper ores become an additional source of uranium recovery [ru

  6. An innovative treatment method for an aqueous waste from the enhanced oil recovery process

    International Nuclear Information System (INIS)

    Alimahmoodi, M.; Mulligan, C.N.

    2009-01-01

    Anaerobic treatment was evaluated to determine its effectiveness in treating a waste stream from the process of Enhanced Oil Recovery (EOR) to remove solubilized CO 2 (98%) and petroleum hydrocarbons (83%) using formate (2 g/L) and sucrose (2.5 g/L) as electron donors in two consecutive reactors. The method of evolutionary operation (EVOP) factorial design was applied to optimize the system and the net energy ratio (NER) of 3.7 was calculated for the system which showed a sustainable biogas production. This method is less complex than other competitive methods, and in addition to its low energy requirements, it can produce CH 4 from CO 2 as a clean source of energy. (author)

  7. Microbiological methods for the water recovery systems test, revision 1.1

    Science.gov (United States)

    Rhoads, Tim; Kilgore, M. V., Jr.; Mikell, A. T., Jr.

    1990-01-01

    Current microbiological parameters specified to verify microbiological quality of Space Station Freedom water quality include the enumeration of total bacteria, anaerobes, aerobes, yeasts and molds, enteric bacteria, gram positives, gram negatives, and E. coli. In addition, other parameters have been identified as necessary to support the Water Recovery Test activities to be conducted at the NASA/MSFC later this year. These other parameters include aerotolerant eutrophic mesophiles, legionellae, and an additional method for heterotrophic bacteria. If inter-laboratory data are to be compared to evaluate quality, analytical methods must be eliminated as a variable. Therefore, each participating laboratory must utilize the same analytical methods and procedures. Without this standardization, data can be neither compared nor validated between laboratories. Multiple laboratory participation represents a conservative approach to insure quality and completeness of data. Invariably, sample loss will occur in transport and analyses. Natural variance is a reality on any test of this magnitude and is further enhanced because biological entities, capable of growth and death, are specific parameters of interest. The large variation due to the participation of human test subjects has been noted with previous testing. The resultant data might be dismissed as 'out of control' unless intra-laboratory control is included as part of the method or if participating laboratories are not available for verification. The purpose of this document is to provide standardized laboratory procedures for the enumeration of certain microorganisms in water and wastewater specific to the water recovery systems test. The document consists of ten separate cultural methods and one direct count procedure. It is not intended nor is it implied to be a complete microbiological methods manual.

  8. The trees and the forest: mixed methods in the assessment of recovery based interventions' processes and outcomes in mental health.

    Science.gov (United States)

    Hasson-Ohayon, Ilanit; Roe, David; Yanos, Philip T; Lysaker, Paul H

    2016-12-01

    Recent developments in mental health have emphasized recovery as an outcome for people with serious mental illness (SMI). Accordingly, several studies have attempted to evaluate the process and outcome of recovery-oriented psychosocial interventions. To review and discuss quantitative and qualitative findings from previous efforts to study the impact of five recovery-oriented interventions: Illness Management and Recovery (IMR), Narrative Enhancement and Cognitive Therapy (NECT), Supported Employment (SE), Supported Socialization (SS), and Family Psychoeducation. Reviewing the literature on studies that examine the effectiveness of these interventions by using both quantitative and qualitative approach. Qualitative findings in these studies augment quantitative findings and at times draw attention to unexpected findings and uniquely illuminate the effects of these interventions on self-reflective processes. There is a need for further exploration of how mixed-methods can be implemented to explore recovery-oriented outcomes. Critical questions regarding the implications of qualitative findings are posed.

  9. Modelling of Evaporator in Waste Heat Recovery System using Finite Volume Method and Fuzzy Technique

    Directory of Open Access Journals (Sweden)

    Jahedul Islam Chowdhury

    2015-12-01

    Full Text Available The evaporator is an important component in the Organic Rankine Cycle (ORC-based Waste Heat Recovery (WHR system since the effective heat transfer of this device reflects on the efficiency of the system. When the WHR system operates under supercritical conditions, the heat transfer mechanism in the evaporator is unpredictable due to the change of thermo-physical properties of the fluid with temperature. Although the conventional finite volume model can successfully capture those changes in the evaporator of the WHR process, the computation time for this method is high. To reduce the computation time, this paper develops a new fuzzy based evaporator model and compares its performance with the finite volume method. The results show that the fuzzy technique can be applied to predict the output of the supercritical evaporator in the waste heat recovery system and can significantly reduce the required computation time. The proposed model, therefore, has the potential to be used in real time control applications.

  10. Standard test methods for the strong-base resins used in the recovery of uranium

    International Nuclear Information System (INIS)

    Ford, M.A.; Lombaard, L.R.

    1986-01-01

    There are no detailed specifications for the strong-base ion-exchange resins used in continuous ion-exchange plants, and it was considered that a very useful purpose would be served by the publication of a series of standard laboratory tests on which such specifications could be based. This report describes test methods that are relevant to the ion-exchange recovery of uranium. They include tests of the physical properties of strong-base resins (relative density, particle-size distribution, and moisture content) and of their chemical properties (theoretical capacity, equilibrium capacity, kinetics of loading and elution). Included are several supporting procedures that are used in conjunction with these methods

  11. Taguchi optimization: Case study of gold recovery from amalgamation tailing by using froth flotation method

    Science.gov (United States)

    Sudibyo, Aji, B. B.; Sumardi, S.; Mufakir, F. R.; Junaidi, A.; Nurjaman, F.; Karna, Aziza, Aulia

    2017-01-01

    Gold amalgamation process was widely used to treat gold ore. This process produces the tailing or amalgamation solid waste, which still contains gold at 8-9 ppm. Froth flotation is one of the promising methods to beneficiate gold from this tailing. However, this process requires optimal conditions which depends on the type of raw material. In this study, Taguchi method was used to optimize the optimum conditions of the froth flotation process. The Taguchi optimization shows that the gold recovery was strongly influenced by the particle size which is the best particle size at 150 mesh followed by the Potassium amyl xanthate concentration, pH and pine oil concentration at 1133.98, 4535.92 and 68.04 gr/ton amalgamation tailing, respectively.

  12. Development a recovery method of 13I from the 23'5U fission products

    International Nuclear Information System (INIS)

    Bignardi, Aline M.T.; Osso Junior, Joao Alberto

    2013-01-01

    13I is a iodine radioisotope widely used in nuclear medicine that can be used either for diagnostic or for treatment due to its physical decay by β- and its high emission of rays-γ. It is produced at IPEN through the irradiation of TeO 2 targets in the IEA-R1 nuclear reactor. There is also the possibility produced it by the fission of 235 U. The aim of this work is to develop a recovery method of 13I in the production process of 99 Mo through the route of acid dissolution of 235 U targets, with the quality to be used in Nuclear Medicine. 13I finds itself in two stages of the process, either in the gaseous produced in the acid dissolution of metallic U targets and the smallest part in solution. In this work was studied the recovery of 131 in these two stages. Several materials were used for the capture and recovery of 13I at the two phases of the process. Anionic cartridges, Ag cartridges, anion exchange resin, activated charcoal columns and AgI precipitation were tested. Solutions with 13 '1I in 0.1 mol.L -1 NaOH were percolated through the materials and the eluted solutions were analyzed in a dose calibrator. Among all the tests that were executed, at first, the anion exchange resin and AgI precipitation have showed the best retention result (100%). The results of elution have varied according to the material, the activated charcoal presented a elution yield between 70% and 82% At first, it is possible to conclude that anion exchange resin and AgI precipitation show better results for 13I retention and the column and activated charcoal have a great potential for the elution of 131 in the right chemical state. (author)

  13. Recovery of Copper from Copper Slag by Hydrometallurgy Method, from Iraqi Factories Waste

    Directory of Open Access Journals (Sweden)

    Bahaa Sami Mahdi

    2018-05-01

    Full Text Available   In this research, the recovery of copper from copper slag is investigated using hydrometallurgy method. Slag samples were taken from Al-Shaheed State Company. The results of the chemical analysis showed that the slag contained 11.4% of copper. The recovery process included two stages; the first stage is leaching using diluted sulfuric acid. The most important variables that effect on the leaching process was studied, such as acid concentration, hydrogen peroxide adding, particle size, liquid to solid, stirring speed and leaching time by changing the condition and the stabilizing of other factors at room temperature.               The second stage is precipitation of copper from leaching solution by zinc powder with different weights and times, at room temperature and 1.5 PH value. The results of the first stage manifested that about 99.7% of the copper have been dissolved at the following operational conditions: 50% acid concentration, 5 ml hydrogen peroxide adding, particle size (-75+53 micron, 1:10 liquid to solid, 500 rpm stirring speed and 25 min of leaching time. The highest percentage of copper precipitation in the second stage was 99.8% when added 3gm zinc powder at 20 min. The XRD result revealed that the predominant phase was pure copper. The results of EDS exhibited that a few percentage of oxygen appeared with copper powder. The final of copper recovery ratio was 99.3% with 99.2% purity.

  14. Acoustic Radiation Force-Induced Creep-Recovery (ARFICR): A Noninvasive Method to Characterize Tissue Viscoelasticity.

    Science.gov (United States)

    Amador Carrascal, Carolina; Chen, Shigao; Urban, Matthew W; Greenleaf, James F

    2018-01-01

    Ultrasound shear wave elastography is a promising noninvasive, low cost, and clinically viable tool for liver fibrosis staging. Current shear wave imaging technologies on clinical ultrasound scanners ignore shear wave dispersion and use a single group velocity measured over the shear wave bandwidth to estimate tissue elasticity. The center frequency and bandwidth of shear waves induced by acoustic radiation force depend on the ultrasound push beam (push duration, -number, etc.) and the viscoelasticity of the medium, and therefore are different across scanners from different vendors. As a result, scanners from different vendors may give different tissue elasticity measurements within the same patient. Various methods have been proposed to evaluate shear wave dispersion to better estimate tissue viscoelasticity. A rheological model such as the Kelvin-Voigt model is typically fitted to the shear wave dispersion to solve for the elasticity and viscosity of tissue. However, these rheological models impose strong assumptions about frequency dependence of elasticity and viscosity. Here, we propose a new method called Acoustic Radiation Force Induced Creep-Recovery (ARFICR) capable of quantifying rheological model-independent measurements of elasticity and viscosity for more robust tissue health assessment. In ARFICR, the creep-recovery time signal at the focus of the push beam is used to calculate the relative elasticity and viscosity (scaled by an unknown constant) over a wide frequency range. Shear waves generated during the ARFICR measurement are also detected and used to calculate the shear wave velocity at its center frequency, which is then used to calibrate the relative elasticity and viscosity to absolute elasticity and viscosity. In this paper, finite-element method simulations and experiments in tissue mimicking phantoms are used to validate and characterize the extent of viscoelastic quantification of ARFICR. The results suggest that ARFICR can measure tissue

  15. Evaluation of Etiology and Treatment Methods for Epistaxis: A Review at a Tertiary Care Hospital in Central Nepal

    OpenAIRE

    Parajuli, Ramesh

    2015-01-01

    Introduction. Epistaxis is one of the most common emergencies in Otorhinolaryngology. It is usually managed with simple conservative measures but occasionally it is a life threatening condition. Identification of the cause is important, as it reflects the management plan being followed. Aims and Objectives. To analyze the etiology and treatment methods for patients with epistaxis. Methods. A retrospective study was done in a te...

  16. Recovery of crown mass for energy with whole-tree skidding methods; Puupolttoaineen tuottaminen kokopuujuontomenetelmillae

    Energy Technology Data Exchange (ETDEWEB)

    Nousiainen, I. [Finntech Ltd Oy, Jyvaeskylae (Finland); Vesisenaho, T. [VTT Energy, Jyvaeskylae (Finland)

    1996-12-31

    The main aim of the project `Recovery of crown mass for energy with whole-tree skidding methods` was to develop the integrated harvesting method of wood raw material and wood fuel based on whole-tree skidding. The developed method gives also the possibility to deliver to sawmills raw material in the form of log section. In the harvesting chain under development whole-trees are felled and bunched with a normal one-grip harvester. The whole-trees are skidded to the roadside by a forwarder equipped with a clam bunk. At the roadside the trees are delimbed and cut with the one-grip harvester used for felling and bunching. According to the results of the field tests the harvesting costs of logging residues are in certain final cutting conditions even under 10 FIM/m{sup 3}, when the average stem size is over 0,500 m{sup 3}. In the developed method felling and bunching of whole trees with the one-grip harvester and skidding of whole-trees with the clam skidder succeeded well. The problems of the method concentrate on delimbing and bucking of whole-trees in landing site

  17. Recovery of crown mass for energy with whole-tree skidding methods; Puupolttoaineen tuottaminen kokopuujuontomenetelmillae

    Energy Technology Data Exchange (ETDEWEB)

    Nousiainen, I [Finntech Ltd Oy, Jyvaeskylae (Finland); Vesisenaho, T [VTT Energy, Jyvaeskylae (Finland)

    1997-12-31

    The main aim of the project `Recovery of crown mass for energy with whole-tree skidding methods` was to develop the integrated harvesting method of wood raw material and wood fuel based on whole-tree skidding. The developed method gives also the possibility to deliver to sawmills raw material in the form of log section. In the harvesting chain under development whole-trees are felled and bunched with a normal one-grip harvester. The whole-trees are skidded to the roadside by a forwarder equipped with a clam bunk. At the roadside the trees are delimbed and cut with the one-grip harvester used for felling and bunching. According to the results of the field tests the harvesting costs of logging residues are in certain final cutting conditions even under 10 FIM/m{sup 3}, when the average stem size is over 0,500 m{sup 3}. In the developed method felling and bunching of whole trees with the one-grip harvester and skidding of whole-trees with the clam skidder succeeded well. The problems of the method concentrate on delimbing and bucking of whole-trees in landing site

  18. Fertilizer nitrogen prescription for cotton by 15N recovery method under integrated nutrient management using soil test crop response function

    International Nuclear Information System (INIS)

    Arulmozhiselvan, K.; Govindaswamy, M.; Chellamuthu, S.

    2007-01-01

    Fertilizer efficiency is a vital parameter in prescription functions to compute fertilizer requirements of crops for achieving a specific yield target. In Soil Test Crop Response (STCR) function, nitrogen fertilizer efficiency is calculated by Apparent N Recovery (ANR) method, which includes the effect of added N interaction (ANI) on soil N reserves. In order to exclude soil effect and refine STCR function, the real efficiency of fertilizer N was estimated by 15 N recovery method. By fitting 15 N recovery in the function, the fertilizer N required for a specific yield target of cotton was estimated. The estimated N requirement by 15 N recovery method was lesser than ANR method when available soil N relatively increased. The approach also fine-tuned the N contributing efficiency of soil, farmyard manure and Azospirillum under Integrated Nutrient Management (INM). For achieving 25 q of seed cotton yield in a soil having 220 kg of available N ha -1 , the predicted N requirement was 159 kg ha -1 under ANR method, whereas in 15 N recovery method fertilizer N to be applied was 138 kg ha -1 with urea alone and 79 kg ha -1 with urea + FYM + Azospirillum. (author)

  19. Method of simultaneous recovery of oil and sulfur from bituminous shales

    Energy Technology Data Exchange (ETDEWEB)

    1919-02-25

    The method consists of means for dry distillation of bituminous shales in furnaces heated from inside to recover simultaneously oil and sulfur, and is characterized by obtaining the sulfur partly in the form of sulfuretted hydrogen as a direct distillation product produced in the upper part of the furnace and partly in the form of free sulfur formed in the reduction zone of the furnace by the reduction of the sulfur dioxide formed in the burning zone. It is also characterized by the recovery of sulfur--in so far as the reduction and formation of sulfur dioxide are concerned--being regulated by means of the corresponding regulation of the proportion of the speed of discharging to the amount of air introduced into the process.

  20. Recovery of Lithium from Geothermal Fluid at Lumpur Sidoarjo by Adsorption Method

    Directory of Open Access Journals (Sweden)

    Lukman Noerochim

    2016-05-01

    Full Text Available The recovery of lithium from geothermal fluid at Lumpur Sidoarjo, Indonesia was investigated employing an adsorption method with polymer membrane as container. The lithium concentration in geothermal fluid from Lumpur Sidoarjo used in the present study was about 5 mg/l. Lithium manganese oxide (LMO was selected as a promising adsorbent material due to its non-toxic, topotactical behavior and low cost. In this study, LMO with single Li/Mn mole ratio was prepared, i.e. Li1.6Mn1.6O4. The adsorbent was synthesized by solid state reaction at 500 °C for 5 hrs. A lithium uptake yield from the geothermal fluid of around 6.6 mg/g was obtained.

  1. Method for enhancing selectivity and recovery in the fractional flotation of particles in a flotation column

    Science.gov (United States)

    Klunder, Edgar B [Bethel Park, PA

    2011-08-09

    The method relates to particle separation from a feed stream. The feed stream is injected directly into the froth zone of a vertical flotation column in the presence of a counter-current reflux stream. A froth breaker generates a reflux stream and a concentrate stream, and the reflux stream is injected into the froth zone to mix with the interstitial liquid between bubbles in the froth zone. Counter-current flow between the plurality of bubbles and the interstitial liquid facilitates the attachment of higher hydrophobicity particles to bubble surfaces as lower hydrophobicity particles detach. The height of the feed stream injection and the reflux ratio may be varied in order to optimize the concentrate or tailing stream recoveries desired based on existing operating conditions.

  2. A clock and data recovery method based on phase detector implemented by delay chain in FPGA

    International Nuclear Information System (INIS)

    Xie Mingpu; Wu Jie; Zhang Jie

    2009-01-01

    A clock and data recovery method based on charge pump PLL was developed to archive medium data rate serial digital communication with simple line transceivers. The phase detector was realized by FPGA. A delay chain was constructed by delay elements with the same fixed delay. Every output of the delay elements was latched by the VCO output clock when the input signal went through the delay chain. The latched result was used to detect the data transition, which reflected the phase difference between the input signal and the VCO output clock. The VCO control voltage was adjust by charge pump to reduce the phase difference and archive phase lock. The loop filter was a passive filter,parameters of which were calculated from parameters of the delay chain and VCO. The experimental result shows that the clock of a 64Mbps transmission was recovered with a jitter less than 200 ps. (authors)

  3. Analysis of recovery efficiency in high-temperature aquifer thermal energy storage: a Rayleigh-based method

    Science.gov (United States)

    Schout, Gilian; Drijver, Benno; Gutierrez-Neri, Mariene; Schotting, Ruud

    2014-01-01

    High-temperature aquifer thermal energy storage (HT-ATES) is an important technique for energy conservation. A controlling factor for the economic feasibility of HT-ATES is the recovery efficiency. Due to the effects of density-driven flow (free convection), HT-ATES systems applied in permeable aquifers typically have lower recovery efficiencies than conventional (low-temperature) ATES systems. For a reliable estimation of the recovery efficiency it is, therefore, important to take the effect of density-driven flow into account. A numerical evaluation of the prime factors influencing the recovery efficiency of HT-ATES systems is presented. Sensitivity runs evaluating the effects of aquifer properties, as well as operational variables, were performed to deduce the most important factors that control the recovery efficiency. A correlation was found between the dimensionless Rayleigh number (a measure of the relative strength of free convection) and the calculated recovery efficiencies. Based on a modified Rayleigh number, two simple analytical solutions are proposed to calculate the recovery efficiency, each one covering a different range of aquifer thicknesses. The analytical solutions accurately reproduce all numerically modeled scenarios with an average error of less than 3 %. The proposed method can be of practical use when considering or designing an HT-ATES system.

  4. Novel sample preparation method for surfactant containing suppositories: effect of micelle formation on drug recovery.

    Science.gov (United States)

    Kalmár, Éva; Ueno, Konomi; Forgó, Péter; Szakonyi, Gerda; Dombi, György

    2013-09-01

    Rectal drug delivery is currently at the focus of attention. Surfactants promote drug release from the suppository bases and enhance the formulation properties. The aim of our work was to develop a sample preparation method for HPLC analysis for a suppository base containing 95% hard fat, 2.5% Tween 20 and 2.5% Tween 60. A conventional sample preparation method did not provide successful results as the recovery of the drug failed to fulfil the validation criterion 95-105%. This was caused by the non-ionic surfactants in the suppository base incorporating some of the drug, preventing its release. As guidance for the formulation from an analytical aspect, we suggest a well defined surfactant content based on the turbidimetric determination of the CMC (critical micelle formation concentration) in the applied methanol-water solvent. Our CMC data correlate well with the results of previous studies. As regards the sample preparation procedure, a study was performed of the effects of ionic strength and pH on the drug recovery with the avoidance of degradation of the drug during the procedure. Aminophenazone and paracetamol were used as model drugs. The optimum conditions for drug release from the molten suppository base were found to be 100 mM NaCl, 20-40 mM NaOH and a 30 min ultrasonic treatment of the final sample solution. As these conditions could cause the degradation of the drugs in the solution, this was followed by NMR spectroscopy, and the results indicated that degradation did not take place. The determined CMCs were 0.08 mM for Tween 20, 0.06 mM for Tween 60 and 0.04 mM for a combined Tween 20, Tween 60 system. Copyright © 2013 Elsevier B.V. All rights reserved.

  5. Owning My Thoughts Was Difficult: Encouraging Students to Read and Write Critically in a Tertiary Qualitative Research Methods Course

    Science.gov (United States)

    Wiles, Janine L.; Allen, Ruth E. S.; Butler, Rachael

    2016-01-01

    This paper adds to the nascent literature on teaching research methods and what students learn from courses and assessment. Postgraduate students are often confronted with large amounts of reading, and the content of material can be intimidating. Convincing them also to engage critically with readings is even more difficult. We report on a…

  6. LOWER COST METHODS FOR IMPROVED OIL RECOVERY (IOR) VIA SURFACTANT FLOODING

    Energy Technology Data Exchange (ETDEWEB)

    William A. Goddard III; Yongchun Tang; Patrick Shuler; Mario Blanco; Seung Soon Jang; Shiang-Tai Lin; Prabal Maiti; Yongfu Wu; Stefan Iglauer; Xiaohang Zhang

    2004-09-01

    This report provides a summary of the work performed in this 3-year project sponsored by DOE. The overall objective of this project is to identify new, potentially more cost-effective surfactant formulations for improved oil recovery (IOR). The general approach is to use an integrated experimental and computational chemistry effort to improve our understanding of the link between surfactant structure and performance, and from this knowledge, develop improved IOR surfactant formulations. Accomplishments for the project include: (1) completion of a literature review to assemble current and new surfactant IOR ideas, (2) Development of new atomistic-level MD (molecular dynamic) modeling methodologies to calculate IFT (interfacial tension) rigorously from first principles, (3) exploration of less computationally intensive mesoscale methods to estimate IFT, Quantitative Structure Property Relationship (QSPR), and cohesive energy density (CED) calculations, (4) experiments to screen many surfactant structures for desirable low IFT and solid adsorption behavior, and (5) further experimental characterization of the more promising new candidate formulations (based on alkyl polyglycosides (APG) and alkyl propoxy sulfate surfactants). Important findings from this project include: (1) the IFT between two pure substances may be calculated quantitatively from fundamental principles using Molecular Dynamics, the same approach can provide qualitative results for ternary systems containing a surfactant, (2) low concentrations of alkyl polyglycoside surfactants have potential for IOR (Improved Oil Recovery) applications from a technical standpoint (if formulated properly with a cosurfactant, they can create a low IFT at low concentration) and also are viable economically as they are available commercially, and (3) the alkylpropoxy sulfate surfactants have promising IFT performance also, plus these surfactants can have high optimal salinity and so may be attractive for use in higher

  7. Recovery of iron/iron oxide nanoparticles from solution: comparison of methods and their effects

    International Nuclear Information System (INIS)

    Nurmi, James T.; Sarathy, Vaishnavi; Tratnyek, Paul G.; Baer, Donald R.; Amonette, James E.; Karkamkar, Abhi

    2011-01-01

    Most methods currently being used to recover Fe 0 -core/oxide-shell nanoparticles from solutions (including the solvents they are synthesized or stored in) are potentially problematic because they may alter the particle composition (e.g., depositing salts formed from solutes) or leave the particles prone to transformations during subsequent storage and handling (e.g., due to residual moisture). In this study, several methods for recovery of nanoparticles from aqueous solution were studied to determine how they affect the structure and reactivity of the recovered materials. Simple washing of the nanoparticles during vacuum filtration (i.e., “flash drying”) can leave up to ∼17 wt% residual moisture. Modeling calculations suggest this moisture is mostly capillary or matric water held between particles and particle aggregates, which can be removed by drying for short periods at relative vapor pressures below 0.9. Flash drying followed by vacuum drying, all under N 2 , leaves no detectable residue from precipitation of solutes (detectable by X-ray photoelectron spectroscopy, XPS), no significant changes in overall particle composition or structure (determined by transmission electron microscopy, TEM), and negligible residual moisture (by thermogravimetric analysis, TGA). While this improved flash-drying protocol may be the preferred method for recovering nanoparticles for many purposes, we found that Fe 0 -core/oxide-shell nanoparticles still exhibit gradual aging during storage when characterized electrochemically with voltammetry.

  8. Enhanced oil recovery methods studied by gamma tracer scanning at simulated reservoir conditions

    International Nuclear Information System (INIS)

    Eriksen, D.O.; Haugen, O.B.; Bjornstad, T.

    2009-01-01

    During recovery (production) of hydrocarbons pressure is maintained by injecting prepared sea water and recycled gas (lean gas) into dedicated injection wells. In one well at the Snorre field in the North Sea the injected gas was recycled too fast to enable support of pressure and squeezing of oil. To plug this high-permeable area the operator wanted to inject foam as a test of its possibilities to decrease gas permeability. As part of the project laboratory tests were included. In these tests we could for the first time map the foam inside the sandstone sample at simulated reservoir conditions. The tracers used were 22 Na + for the γ-scanning of the aqueous brine, tritiated water for permeability measurements, and 35 S-labeled organic sulfonic acid of the same compound as the surfactant. This method resulted in a 'negative' mapping of the foam, i.e. measurements of the absence or exclusion of the aqueous phase by the foam. This method was new and showed that radiotracer-based γ-scanning could give much more accurate measurements of the position of the foam than the standard method using measurements of pressure drops over parts of the core. (author)

  9. Integrating Lesion-Symptom Mapping with Other Methods to Investigate Language Networks and Aphasia Recovery

    Directory of Open Access Journals (Sweden)

    Peter E Turkeltaub

    2015-04-01

    Full Text Available Voxel-based lesion-symptom mapping (VLSM has provided valuable insights into the neural underpinnings of various language functions. Integrating lesion mapping methods with other neuroscience techniques may provide new opportunities to investigate questions related both to the neurobiology of language and to plasticity after brain injury. For example, recent diffusion tensor imaging studies have explored relationships between aphasia symptomology and damage in specific white matter tracts (Forkel et al., 2014 or disruption of the white matter connectome (Bonilha, Rorden, & Fridriksson, 2014. VLSM has also recently been used to assess correlations between lesion location and response to transcranial direct current stimulation aphasia treatment (Campana, Caltagirone, & Marangolo, 2015. We have recently undertaken studies integrating VLSM with other techniques, including voxel-based morphometry (VBM and functional MRI, in order to investigate how parts of the brain spared by stroke contribute to recovery. VLSM can be used in this context to map lesions associated with particular patterns of plasticity in brain structure, function, or connectivity. We have also used VLSM to estimate the variance in behavior due to the stroke itself so that this lesion-symptom relationship can be controlled for when examining the contributions of the rest of the brain. Using this approach in combination with VBM, we have identified areas of the right temporoparietal cortex that appear to undergo hypertrophy after stroke and compensate for speech production deficits. In this talk, I will review recent advances in integrating lesion-symptom mapping with other imaging and brain stimulation techniques in order to better understand the brain basis of language and of aphasia recovery.

  10. Comparison between two braking control methods integrating energy recovery for a two-wheel front driven electric vehicle

    International Nuclear Information System (INIS)

    Itani, Khaled; De Bernardinis, Alexandre; Khatir, Zoubir; Jammal, Ahmad

    2016-01-01

    Highlights: • Comparison between two braking methods for an EV maximizing the energy recovery. • Wheels slip ratio control based on robust sliding mode and ECE R13 control methods. • Regenerative braking control strategy. • Energy recovery of a HESS with respect to road surface type and road condition. - Abstract: This paper presents the comparison between two braking methods for a two-wheel front driven Electric Vehicle maximizing the energy recovery on the Hybrid Energy Storage System. The first method consists in controlling the wheels slip ratio while braking using a robust sliding mode controller. The second method will be based on ECE R13H constraints for an M1 passenger vehicle. The vehicle model used for simulation is a simplified five degrees of freedom model. It is driven by two 30 kW permanent magnet synchronous motor (PMSM) recovering energy during braking phases. Several simulation results for extreme braking conditions will be performed and compared on various road type surfaces using Matlab/Simulink®. For an initial speed of 80 km/h, simulation results demonstrate that the difference of energy recovery efficiency between the two control braking methods is beneficial to the ECE constraints control method and it can vary from 3.7% for high friction road type to 11.2% for medium friction road type. At low friction road type, the difference attains 6.6% due to different reasons treated in the paper. The stability deceleration is also discussed and detailed.

  11. Saturation recovery EPR spin-labeling method for quantification of lipids in biological membrane domains.

    Science.gov (United States)

    Mainali, Laxman; Camenisch, Theodore G; Hyde, James S; Subczynski, Witold K

    2017-12-01

    The presence of integral membrane proteins induces the formation of distinct domains in the lipid bilayer portion of biological membranes. Qualitative application of both continuous wave (CW) and saturation recovery (SR) electron paramagnetic resonance (EPR) spin-labeling methods allowed discrimination of the bulk, boundary, and trapped lipid domains. A recently developed method, which is based on the CW EPR spectra of phospholipid (PL) and cholesterol (Chol) analog spin labels, allows evaluation of the relative amount of PLs (% of total PLs) in the boundary plus trapped lipid domain and the relative amount of Chol (% of total Chol) in the trapped lipid domain [ M. Raguz, L. Mainali, W. J. O'Brien, and W. K. Subczynski (2015), Exp. Eye Res., 140:179-186 ]. Here, a new method is presented that, based on SR EPR spin-labeling, allows quantitative evaluation of the relative amounts of PLs and Chol in the trapped lipid domain of intact membranes. This new method complements the existing one, allowing acquisition of more detailed information about the distribution of lipids between domains in intact membranes. The methodological transition of the SR EPR spin-labeling approach from qualitative to quantitative is demonstrated. The abilities of this method are illustrated for intact cortical and nuclear fiber cell plasma membranes from porcine eye lenses. Statistical analysis (Student's t -test) of the data allowed determination of the separations of mean values above which differences can be treated as statistically significant ( P ≤ 0.05) and can be attributed to sources other than preparation/technique.

  12. Improved Savitzky-Golay-method-based fluorescence subtraction algorithm for rapid recovery of Raman spectra.

    Science.gov (United States)

    Chen, Kun; Zhang, Hongyuan; Wei, Haoyun; Li, Yan

    2014-08-20

    In this paper, we propose an improved subtraction algorithm for rapid recovery of Raman spectra that can substantially reduce the computation time. This algorithm is based on an improved Savitzky-Golay (SG) iterative smoothing method, which involves two key novel approaches: (a) the use of the Gauss-Seidel method and (b) the introduction of a relaxation factor into the iterative procedure. By applying a novel successive relaxation (SG-SR) iterative method to the relaxation factor, additional improvement in the convergence speed over the standard Savitzky-Golay procedure is realized. The proposed improved algorithm (the RIA-SG-SR algorithm), which uses SG-SR-based iteration instead of Savitzky-Golay iteration, has been optimized and validated with a mathematically simulated Raman spectrum, as well as experimentally measured Raman spectra from non-biological and biological samples. The method results in a significant reduction in computing cost while yielding consistent rejection of fluorescence and noise for spectra with low signal-to-fluorescence ratios and varied baselines. In the simulation, RIA-SG-SR achieved 1 order of magnitude improvement in iteration number and 2 orders of magnitude improvement in computation time compared with the range-independent background-subtraction algorithm (RIA). Furthermore the computation time of the experimentally measured raw Raman spectrum processing from skin tissue decreased from 6.72 to 0.094 s. In general, the processing of the SG-SR method can be conducted within dozens of milliseconds, which can provide a real-time procedure in practical situations.

  13. Evaluation of a rapid method for recovery of norovirus and hepatitis A virus from oysters and blue mussels

    DEFF Research Database (Denmark)

    Uhrbrand, Katrine; Myrmel, Mette; Maunula, Leena

    2010-01-01

    Foodborne outbreaks caused by noroviruses (NoVs) and hepatitis A virus (HAV) are often linked to consumption of contaminated shellfish. The objective of this study was to identify an appropriate virus recovery method for real-time reverse transcriptase (RT)-PCR detection and subsequently to evalu......Foodborne outbreaks caused by noroviruses (NoVs) and hepatitis A virus (HAV) are often linked to consumption of contaminated shellfish. The objective of this study was to identify an appropriate virus recovery method for real-time reverse transcriptase (RT)-PCR detection and subsequently...

  14. Recovery methods for detection and quantification of Campylobacter depend on meat matrices and bacteriological or PCR tools.

    Science.gov (United States)

    Fosse, J; Laroche, M; Rossero, A; Fédérighi, M; Seegers, H; Magras, C

    2006-09-01

    Campylobacter is one of the main causes of human foodborne bacterial disease associated with meat consumption in developed countries. Therefore, the most effective approach for recovery and detection of Campylobacter from meat should be determined. Two hundred ninety pork skin and chine samples were inoculated with Campylobacter jejuni NCTC 11168 and two strains of Campylobacter coli. Campylobacter cells were then recovered from suspensions and enumerated by direct plating. Campylobacter recovery was evaluated by comparing results for two methods of sample collection (swabbing and mechanical pummeling) and three recovery fluids (peptone water, 5% glucose serum, and demineralized water). End-point multiplex PCR was performed to evaluate the compatibility of the recovery fluids with direct PCR detection techniques. Mean recovery ratios differed significantly between pork skin and chine samples. Ratios were higher for mechanical pummeling (0.53 for pork skin and 0.49 for chine) than for swabbing (0.31 and 0.13, respectively). For pork skin, ratios obtained with peptone water (0.50) and with glucose serum (0.55) were higher than those obtained with demineralized water (0.16). Significant differences were not observed for chine samples. Direct multiplex PCR detection of Campylobacter was possible with pork skin samples. The tools for Campylobacter recovery must be appropriate for the meat matrix to be evaluated. In this study, less than 66% of inoculated Campylobacter was recovered from meat. This underestimation must be taken into account for quantitative risk analysis of Campylobacter infection.

  15. A method for recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite

    Science.gov (United States)

    Zhang, Yi-min; Wang, Li-na; Chen, De-sheng; Wang, Wei-jing; Liu, Ya-hui; Zhao, Hong-xin; Qi, Tao

    2018-02-01

    An innovative method for recovering valuable elements from vanadium-bearing titanomagnetite is proposed. This method involves two procedures: low-temperature roasting of vanadium-bearing titanomagnetite and water leaching of roasting slag. During the roasting process, the reduction of iron oxides to metallic iron, the sodium oxidation of vanadium oxides to water-soluble sodium vanadate, and the smelting separation of metallic iron and slag were accomplished simultaneously. Optimal roasting conditions for iron/slag separation were achieved with a mixture thickness of 42.5 mm, a roasting temperature of 1200°C, a residence time of 2 h, a molar ratio of C/O of 1.7, and a sodium carbonate addition of 70wt%, as well as with the use of anthracite as a reductant. Under the optimal conditions, 93.67% iron from the raw ore was recovered in the form of iron nugget with 95.44% iron grade. After a water leaching process, 85.61% of the vanadium from the roasting slag was leached, confirming the sodium oxidation of most of the vanadium oxides to water-soluble sodium vanadate during the roasting process. The total recoveries of iron, vanadium, and titanium were 93.67%, 72.68%, and 99.72%, respectively.

  16. Spectrum recovery method based on sparse representation for segmented multi-Gaussian model

    Science.gov (United States)

    Teng, Yidan; Zhang, Ye; Ti, Chunli; Su, Nan

    2016-09-01

    Hyperspectral images can realize crackajack features discriminability for supplying diagnostic characteristics with high spectral resolution. However, various degradations may generate negative influence on the spectral information, including water absorption, bands-continuous noise. On the other hand, the huge data volume and strong redundancy among spectrums produced intense demand on compressing HSIs in spectral dimension, which also leads to the loss of spectral information. The reconstruction of spectral diagnostic characteristics has irreplaceable significance for the subsequent application of HSIs. This paper introduces a spectrum restoration method for HSIs making use of segmented multi-Gaussian model (SMGM) and sparse representation. A SMGM is established to indicating the unsymmetrical spectral absorption and reflection characteristics, meanwhile, its rationality and sparse property are discussed. With the application of compressed sensing (CS) theory, we implement sparse representation to the SMGM. Then, the degraded and compressed HSIs can be reconstructed utilizing the uninjured or key bands. Finally, we take low rank matrix recovery (LRMR) algorithm for post processing to restore the spatial details. The proposed method was tested on the spectral data captured on the ground with artificial water absorption condition and an AVIRIS-HSI data set. The experimental results in terms of qualitative and quantitative assessments demonstrate that the effectiveness on recovering the spectral information from both degradations and loss compression. The spectral diagnostic characteristics and the spatial geometry feature are well preserved.

  17. Sampling methods for recovery of human enteric viruses from environmental surfaces.

    Science.gov (United States)

    Turnage, Nicole L; Gibson, Kristen E

    2017-10-01

    Acute gastroenteritis causes the second highest infectious disease burden worldwide. Human enteric viruses have been identified as leading causative agents of acute gastroenteritis as well as foodborne illnesses in the U.S. and are generally transmitted by fecal-oral contamination. There is growing evidence of transmission occurring via contaminated fomite including food contact surfaces. Additionally, human enteric viruses have been shown to remain infectious on fomites over prolonged periods of time. To better understand viral persistence, there is a need for more studies to investigate this phenomenon. Therefore, optimization of surface sampling methods is essential to aid in understanding environmental contamination to ensure proper preventative measures are being applied. In general, surface sampling studies are limited and highly variable among recovery efficiencies and research parameters used (e.g., virus type/density, surface type, elution buffers, tools). This review aims to discuss the various factors impacting surface sampling of viruses from fomites and to explore how researchers could move towards a more sensitive and standard sampling method. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Germanium recovery from gasification fly ash: evaluation of end-products obtained by precipitation methods.

    Science.gov (United States)

    Arroyo, Fátima; Font, Oriol; Fernández-Pereira, Constantino; Querol, Xavier; Juan, Roberto; Ruiz, Carmen; Coca, Pilar

    2009-08-15

    In this study the purity of the germanium end-products obtained by two different precipitation methods carried out on germanium-bearing solutions was evaluated as a last step of a hydrometallurgy process for the recovery of this valuable element from the Puertollano Integrated Gasification Combined Cycle (IGCC) fly ash. Since H(2)S is produced as a by-product in the gas cleaning system of the Puertollano IGCC plant, precipitation of germanium as GeS(2) was tested by sulfiding the Ge-bearing solutions. The technological and hazardous issues that surround H(2)S handling conducted to investigate a novel precipitation procedure: precipitation as an organic complex by adding 1,2-dihydroxy benzene pyrocatechol (CAT) and cetyltrimethylammonium bromide (CTAB) to the Ge-bearing solutions. Relatively high purity Ge end-products (90 and 93% hexagonal-GeO(2) purity, respectively) were obtained by precipitating Ge from enriched solutions, as GeS(2) sulfiding the solutions with H(2)S, or as organic complex with CAT/CTAB mixtures and subsequent roasting of the precipitates. Both methods showed high efficiency (>99%) to precipitate selectively Ge using a single precipitation stage from germanium-bearing solutions.

  19. Recovery of uranium from alkaline ore (Tummalapalle) leach solution using novel precipitating method

    International Nuclear Information System (INIS)

    Biswas, Sujoy; Rupawate, V.H.; Hareendran, K.N.; Roy, S.B.; Chakravartty, J.K.

    2014-01-01

    The aim of present study is recovery of uranium from such ore leach solution containing 2 O 7 at pH ∼12.5. The average particle size of the MgU 2 O 7 particles was 20 micron and overall uranium recovery was 97%. The composition of final precipitate was characterized using XRD and surface morphology was studied using SEM

  20. Monitoring the quality of total hip replacement in a tertiary care department using a cumulative summation statistical method (CUSUM).

    Science.gov (United States)

    Biau, D J; Meziane, M; Bhumbra, R S; Dumaine, V; Babinet, A; Anract, P

    2011-09-01

    The purpose of this study was to define immediate post-operative 'quality' in total hip replacements and to study prospectively the occurrence of failure based on these definitions of quality. The evaluation and assessment of failure were based on ten radiological and clinical criteria. The cumulative summation (CUSUM) test was used to study 200 procedures over a one-year period. Technical criteria defined failure in 17 cases (8.5%), those related to the femoral component in nine (4.5%), the acetabular component in 32 (16%) and those relating to discharge from hospital in five (2.5%). Overall, the procedure was considered to have failed in 57 of the 200 total hip replacements (28.5%). The use of a new design of acetabular component was associated with more failures. For the CUSUM test, the level of adequate performance was set at a rate of failure of 20% and the level of inadequate performance set at a failure rate of 40%; no alarm was raised by the test, indicating that there was no evidence of inadequate performance. The use of a continuous monitoring statistical method is useful to ensure that the quality of total hip replacement is maintained, especially as newer implants are introduced.

  1. A new method for recovery of cellulose from lignocellulosic bio-waste: Pile processing.

    Science.gov (United States)

    Tezcan, Erdem; Atıcı, Oya Galioğlu

    2017-12-01

    This paper presents a new delignification method (pile processing) for the recovery of cellulose from lignocellulosic bio-wastes, adapted from heap leaching technology in metallurgy. The method is based on the stacking of cellulosic materials in a pile, irrigation of the pile with aqueous reactive solution from the top, lignin and hemicellulose removal and enrichment of cellulose by the reactive solution while percolation occurs through the bottom of the pile, recirculating the reactive solution after adjusting several values such as chemical concentrations, and allow the system run until the desired time or cellulose purity. Laboratory scale systems were designed using fall leaves (FL) as lignocellulosic waste materials. The ideal condition for FL was noted as: 0.1g solid NaOH addition per gram of FL into the irrigating solution resulting in instant increase in pH to about 13.8, later allowing self-decrease in pH due to delignification over time down to 13.0, at which point another solid NaOH addition was performed. The new method achieved enrichment of cellulose from 30% to 81% and removal of 84% of the lignin that prevents industrial application of lignocellulosic bio-waste using total of 0.3g NaOH and 4ml of water per gram of FL at environmental temperature and pressure. While the stirring reactions used instead of pile processing required the same amount of NaOH, they needed at least 12ml of water and delignification was only 56.1%. Due to its high delignification performance using common and odorless chemicals and simple equipment in mild conditions, the pile processing method has great promise for the industrial evaluation of lignocellulosic bio-waste. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. A novel method for furfural recovery via gas stripping assisted vapor permeation by a polydimethylsiloxane membrane

    Science.gov (United States)

    Hu, Song; Guan, Yu; Cai, Di; Li, Shufeng; Qin, Peiyong; Karim, M. Nazmul; Tan, Tianwei

    2015-03-01

    Furfural is an important platform chemical with a wide range of applications. However, due to the low concentration of furfural in the hydrolysate, the conventional methods for furfural recovery are energy-intensive and environmentally unfriendly. Considering the disadvantages of pervaporation (PV) and distillation in furfural separation, a novel energy-efficient `green technique', gas stripping assisted vapor permeation (GSVP), was introduced in this work. In this process, the polydimethylsiloxane (PDMS) membrane was prepared by employing water as solvent. Coking in pipe and membrane fouling was virtually non-existent in this new process. In addition, GSVP was found to achieve the highest pervaporation separation index of 216200 (permeate concentration of 71.1 wt% and furfural flux of 4.09 kgm-2h-1) so far, which was approximately 2.5 times higher than that found in pervaporation at 95°C for recovering 6.0 wt% furfural from water. Moreover, the evaporation energy required for GSVP decreased by 35% to 44% relative to that of PV process. Finally, GSVP also displayed more promising potential in industrial application than PV, especially when coupled with the hydrolysis process or fermentation in biorefinery industry.

  3. Comparison of methods for miRNA extraction from plasma and quantitative recovery of RNA from plasma and cerebrospinal fluid

    Directory of Open Access Journals (Sweden)

    Melissa A McAlexander

    2013-05-01

    Full Text Available Interest in extracellular RNA has intensified as evidence accumulates that these molecules may be useful as indicators of a wide variety of biological conditions. To establish specific extracellular RNA molecules as clinically relevant biomarkers, reproducible recovery from biological samples and reliable measurements of the isolated RNA are paramount. Towards these ends, careful and rigorous comparisons of technical procedures are needed at all steps from sample handling to RNA isolation to RNA measurement protocols. In the investigations described in this methods paper, RT-qPCR was used to examine the apparent recovery of specific endogenous miRNAs and a spiked-in synthetic RNA from blood plasma samples. RNA was isolated using several widely used RNA isolation kits, with or without the addition of glycogen as a carrier. Kits examined included total RNA isolation systems that have been commercially available for several years and commonly adapted for extraction of biofluid RNA, as well as more recently introduced biofluids-specific RNA methods. Our conclusions include the following: some RNA isolation methods appear to be superior to others for the recovery of RNA from biological fluids; addition of a carrier molecule seems to be beneficial for some but not all isolation methods; and partially or fully quantitative recovery of RNA is observed from increasing volumes of plasma and cerebrospinal fluid.

  4. Recovery of salmonella serovar enteritidis from inoculated broiler hatching eggs using shell rinse and shell crush sampling methods

    Science.gov (United States)

    This study compared the recovery of Salmonella from hatching eggs using three sampling methods (eggshell rinsing, eggshell crush following a previous rinse, and eggshell crush without previous rinse). Eggshells were drop-inoculated with approximately 10, 100, or 1,000 cfu/eggshell of S. Enteritidis...

  5. Comparison of the different methods for the recovery of suspended matter from estuarine waters: deposition, filtration and centrifugation

    Energy Technology Data Exchange (ETDEWEB)

    Etcheber, H; Jouanneau, J M

    1980-12-01

    The advantages and disadvantages of three methods used to recover heavy metals from estuarine waters are compared. Deposition, filtration, and centrifugation were used on samples from the Gironde estuary of France. Recovery by deposition is satisfactory in cases of flocculation and high turbidity. Centrifugation is reliable for the determination of several elements in zones of low turbidity. (12 references, 4 tables)

  6. Secondary and tertiary hyperparathyroidism.

    Science.gov (United States)

    Jamal, Sophie A; Miller, Paul D

    2013-01-01

    We reviewed the etiology and management of secondary and tertiary hyperparathyroidism. Secondary hyperparathyroidism is characterized by an increase in parathyroid hormone (PTH) that is appropriate and in response to a stimulus, most commonly low serum calcium. In secondary hyperparathyroidism, the serum calcium is normal and the PTH level is elevated. Tertiary hyperparathyroidism is characterized by excessive secretion of PTH after longstanding secondary hyperparathyroidism, in which hypercalcemia has ensued. Tertiary hyperparathyroidism typically occurs in men and women with chronic kidney disease usually after kidney transplant. The etiology and treatment of secondary hyperparathyroidism is relatively straightforward whereas data on the management of tertiary hyperparathyroidism is limited to a few small trials with short follow-up. Copyright © 2013 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

  7. Development of a practical field method for the determination of elastic recovery of modified binders.

    CSIR Research Space (South Africa)

    Airey, GD

    1994-10-01

    Full Text Available in field laboratories. The field elastic recovery test (FERT), based on the standard laboratory ductilometer test was designed to overcome this problem. In this paper, the design and development of FERT, its repeatability and reproducibility, its...

  8. A quantitative method to evaluate microbial electrolysis cell effectiveness for energy recovery and wastewater treatment

    KAUST Repository

    Ivanov, Ivan; Ren, Lijiao; Siegert, Michael; Logan, Bruce E.

    2013-01-01

    Microbial electrolysis cells (MECs) are potential candidates for sustainable wastewater treatment as they allow for recovery of the energy input by producing valuable chemicals such as hydrogen gas. Evaluating the effectiveness of MEC treatment

  9. Staff perceptions of borderline personality disorder and recovery: A Q-sort method approach.

    Science.gov (United States)

    Dean, Rebecca; Siddiqui, Sara; Beesley, Frank; Fox, John; Berry, Katherine

    2018-04-16

    This study was the first to explore how staff that work with people diagnosed with borderline personality disorder (BPD) perceive recovery in this client group. These views are important because of the crucial role that staff play in the care of people with BPD, and the challenges that staff experience with these clients. A Q methodology design was used, containing 58 statements about recovery. Twenty-nine mental health staff sorted recovery statements according to perceived importance to recovery in BPD. There were two different viewpoints about recovery in BPD. A medically oriented group viewed coping with symptoms and behaviours specific to BPD as being most important to recovery, whereas participants who were more well-being oriented viewed achieving overall well-being that was universally valued regardless of diagnosis as more important. Both groups reported that engaging in socially valued activities such as work and education was not an important aspect of recovery and that people with BPD could be considered to have recovered despite continued impairments in everyday functioning. Staff perceptions of recovery in BPD can differ, which poses risks for consistent team working, a particularly important issue in this client group due to the relational difficulties associated with the diagnosis. Multidisciplinary teams working with people diagnosed with BPD therefore need to find a forum to promote a shared understanding of each patient's needs and support plans. We advocate that team formulation is a promising approach to achieve more consistent ways of working within teams. Findings Multidisciplinary teams working with people with borderline personality disorder should use team formulations to create a shared understanding of individual patient's needs and goals for recovery, so they can deliver a consistent approach to care. Recovery questionnaires should be used to develop an understanding of a patient's individual recovery goals. Limitations Opportunity

  10. Simultaneous Imaging of CBF Change and BOLD with Saturation-Recovery-T1 Method.

    Directory of Open Access Journals (Sweden)

    Xiao Wang

    Full Text Available A neuroimaging technique based on the saturation-recovery (SR-T1 MRI method was applied for simultaneously imaging blood oxygenation level dependence (BOLD contrast and cerebral blood flow change (ΔCBF, which is determined by CBF-sensitive T1 relaxation rate change (ΔR1CBF. This technique was validated by quantitatively examining the relationships among ΔR1CBF, ΔCBF, BOLD and relative CBF change (rCBF, which was simultaneously measured by laser Doppler flowmetry under global ischemia and hypercapnia conditions, respectively, in the rat brain. It was found that during ischemia, BOLD decreased 23.1±2.8% in the cortical area; ΔR1CBF decreased 0.020±0.004s-1 corresponding to a ΔCBF decrease of 1.07±0.24 ml/g/min and 89.5±1.8% CBF reduction (n=5, resulting in a baseline CBF value (=1.18 ml/g/min consistent with the literature reports. The CBF change quantification based on temperature corrected ΔR1CBF had a better accuracy than apparent R1 change (ΔR1app; nevertheless, ΔR1app without temperature correction still provides a good approximation for quantifying CBF change since perfusion dominates the evolution of the longitudinal relaxation rate (R1app. In contrast to the excellent consistency between ΔCBF and rCBF measured during and after ischemia, the BOLD change during the post-ischemia period was temporally disassociated with ΔCBF, indicating distinct CBF and BOLD responses. Similar results were also observed for the hypercapnia study. The overall results demonstrate that the SR-T1 MRI method is effective for noninvasive and quantitative imaging of both ΔCBF and BOLD associated with physiological and/or pathological changes.

  11. A quantitative method to evaluate microbial electrolysis cell effectiveness for energy recovery and wastewater treatment

    KAUST Repository

    Ivanov, Ivan

    2013-10-01

    Microbial electrolysis cells (MECs) are potential candidates for sustainable wastewater treatment as they allow for recovery of the energy input by producing valuable chemicals such as hydrogen gas. Evaluating the effectiveness of MEC treatment for different wastewaters requires new approaches to quantify performance, and the establishment of specific procedures and parameters to characterize the outcome of fed-batch treatability tests. It is shown here that Coulombic efficiency can be used to directly calculate energy consumption relative to wastewater treatment in terms of COD removal, and that the average current, not maximum current, is a better metric to evaluate the rate of the bioelectrochemical reactions. The utility of these methods was demonstrated using simulated current profiles and actual wastewater tests. Industrial and domestic wastewaters were evaluated using small volume MECs, and different inoculation strategies. The energy needed for treatment was 2.17kWhkgCOD-1 for industrial wastewater and 2.59kWhkgCOD-1 for domestic wastewater. When these wastewaters were combined in equal amounts, the energy required was reduced to 0.63kWhkgCOD-1. Acclimation of the MEC to domestic wastewater, prior to tests with industrial wastewaters, was the easiest and most direct method to optimize MEC performance for industrial wastewater treatment. A pre-acclimated MEC accomplished the same removal (1847 ± 53 mg L-1) as reactor acclimated to only the industrial wastewater (1839 ± 57 mg L-1), but treatment was achieved in significantly less time (70 h versus 238 h). © 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

  12. Interlaboratory evaluation of the AOAC method and the A-1 procedure for recovery of fecal coliforms from foods.

    Science.gov (United States)

    Andrews, W H; Wilson, C R; Poelma, P L; Bullock, L K; McClure, F D; Gentile, D E

    1981-09-01

    An interlaboratory evaluation was made of the 96 h AOAC method and the 24 h A-1 procedure for the enumeration of fecal coliforms in samples of yellow corn meal, rye flour, mung beans, raw ground beef, and raw oyster homogenate. Results indicated that the efficiency of the A-1 procedure, measured in terms of recovery of fecal coliforms, and the reproducibility of that recovery were dependent on the particular food being analyzed. Accordingly, until its efficiency can be more fully demonstrated, the A-1 procedure is recommended only as a screening procedure for fecal coliforms in foods.

  13. Mixed La-Li heterobimetallic complexes for tertiary nitroaldol resolution.

    Science.gov (United States)

    Tosaki, Shin-ya; Hara, Keiichi; Gnanadesikan, Vijay; Morimoto, Hiroyuki; Harada, Shinji; Sugita, Mari; Yamagiwa, Noriyuki; Matsunaga, Shigeki; Shibasaki, Masakatsu

    2006-09-13

    A kinetic resolution of tertiary nitroaldols derived from simple ketones is described. Mixed BINOL/biphenol La-Li heterobimetallic complexes gave the best selectivity in retro-nitroaldol reactions of racemic tertiary nitroaldols. By using a mixture of La-Li3-(1a)3 complex (LLB 2a) and La-Li3-(1b)3 (LLB* 2b) complex in a ratio of 2/1, chiral tertiary nitroaldols were obtained in 80-97% ee and 30-47% recovery yield.

  14. A method for seedling recovery in Jatropha curcas after cryogenic exposure of the seeds

    Directory of Open Access Journals (Sweden)

    Rafael de C. Silva

    2012-03-01

    Full Text Available Actually, the germplasm of Jatropha spp. is conserved as whole plants in field collections. Under this storage method, the genetic resources are exposed to disease, pest and natural hazards such as human error, drought and weather damage. Besides, field genebanks are costly to maintain and with important requirements of trained personnel. Thus, the development of efficient techniques to ensure its safe conservation and regeneration is therefore of paramount importance. In this work we describe a method for Jatropha curcas seeds cryoexposure and seedling recovery after thawed. In a first experiment, an efficient protocol for in vitro plant recovery was carried out using zygotic embryo or seeds with or without coat. In a second experiment, desiccated seeds with or without coat were exposed to liquid nitrogen and evaluated after cryoexposure. Germination percentages were variable among treatments, and seeds demonstrated tolerance to liquid nitrogen exposure under certain conditions. Seeds of J. curcas presented up to 99.6% germination after seed coat removal. Seeds with coat cultured in vitro did not germinate, and were 60% contaminated. The germination of the zygotic embryos was significantly higher in the ½ MS medium (93.1% than in WPM medium (76.2%, but from zygotic embryo, abnormal seedlings reached up to 99%. Seeds with coat exposed to liquid nitrogen showed 60% germination in culture after coat removal with good plant growth, and seeds cryopreserved without coat presented 82% germination, but seedlings showed a reduced vigor and a significant increase in abnormal plants. Seeds cultured in vitro with coat did not germinate, independently of cryoexposure or not. This study reports the first successful in vitro seedling recovery methodology for Jatropha curcas seeds, after a cryopreservation treatment, and is recommended as an efficient procedure for in vitro plant recovery, when seeds are conserved in germplasm banks by low or cryotemperatures

  15. Optimization of aspergillus niger nutritional conditions using statistical experimental methods for bio-recovery of manganese from pyrolusite

    International Nuclear Information System (INIS)

    Mujeeb-ur-Rahman; Yasinzai, M.M.; Tareen, R.B.; Iqbal, A.; Gul, S.; Odhano, E.A.

    2011-01-01

    Optimization of aspergillus niger nutritional conditions using statistical experimental methods for bio-recovery of manganese from pyrolusite Mujeeb-ur-rahman, Mohammed Masoom Yasinzai, Rasool Bakhsh Tareen, Asim Iqbal, Ejaz Ali Odhano, Shereen Gul. The nutritional requirements for Aspergillus niger PCSIR-06 for bio-recovery of manganese from pyrolusite ore were optimized. Box-Bhenken design and response surface methodology were used for designing of experiment and statistical analysis of the results. This procedure limited the number of actual experiments to 54 for studying the possible interaction between six nutrients. The optimum concentration of the nutrients were Sucrose 148.5 g/L, KH/sub 2/PO/sub 4/ 0.50 g/L, NH/sub 4/NO/sub 3/ 0.33 g/L, MgSO/sub 4/ 0.41 g/L, Zn 23.76 mg/L, Fe 0.18 mg/L for Aspergillus niger to achieve maximum bio-recovery of manganese (82.47 +- 5.67%). The verification run confirmed the predicted optimized concentration of all the six ingredients for maximum bio leaching of manganese and successfully confirmed the use of Box-Bhenken experimental design for maximum bio-recovery. Results also revealed that small and less time consuming experimental designs could be efficient for optimization of bio-recovery processes. (author)

  16. Soot blowing methods and soot steam consumption in Swedish recovery boilers; Sotningsmetoder och sotaangfoerbrukning i svenska sodapannor

    Energy Technology Data Exchange (ETDEWEB)

    Svedin, Kristoffer; Wallin, Erik; Ahlroth, Mikael

    2008-09-15

    The aim with the report was to put together a description of the current state of the sootblowing systems at Swedish recovery boilers, and to explain differences in cleanability and sootblowing efficiency. In chapter 4 a summary of new techniques and alternative soot blowing methods is found. The report is intended for persons working in the pulp industry. To facilitate the benchmarking the recovery boilers have been divided into two groups. Group A comprises recovery boilers which only have one stop per year and the remaining recovery boilers with more than one stop are classified into group B. The following conclusions, based on the recovery boiler design specifications, are of importance to achieve high boiler availability: Low furnace load; High recovery boiler, wide furnace bottom area; Modern air ports; Small or no correlation between cross pitch division in heat surfaces and cleanability could be seen. The expectation was to identify such a relation. However there are doubts on the correctness in reported data. The amount of chlorine and potassium is assumed to affect the cleanability for a few recovery boilers, but for the majority the amounts are low and most likely do not impact the operation. Because of the large impact of the recovery boilers design data (furnace area, load etc.) on the sootblowing, it has been hard to identify the relation cleanability contra sootblowing system. The relations that could be seen are: No distinction between normally designed nozzles and 'high efficiency' nozzles could be identified. The operational conditions for the different models differ a lot and the effect of nozzle type could not be distinguished. Only a minority of the soot blowing sequences are known from the study. In the recovery boilers with problematic areas improvements can be made in the soot blowing sequence. Four recovery boilers are using intelligent soot blowing of some kind. Two of these boilers have low availability and the other two have

  17. Selection Methods for Undergraduate Admissions in Australia. Does the Australian Predominate Entry Scheme the Australian Tertiary Admissions Rank (ATAR) Have a Future?

    Science.gov (United States)

    Blyth, Kathryn

    2014-01-01

    This article considers the Australian entry score system, the Australian Tertiary Admissions Rank (ATAR), and its usage as a selection mechanism for undergraduate places in Australian higher education institutions and asks whether its role as the main selection criterion will continue with the introduction of demand driven funding in 2012.…

  18. Comparison of the Lysis Centrifugation Method with the Conventional Blood Culture Method in Cases of Sepsis in a Tertiary Care Hospital

    OpenAIRE

    Parikh, Harshal R; De, Anuradha S; Baveja, Sujata M

    2012-01-01

    Introduction : Physicians and microbiologists have long recognized that the presence of living microorganisms in the blood of a patient carries with it considerable morbidity and mortality. Hence, blood cultures have become critically important and frequently performed test in clinical microbiology laboratories for diagnosis of sepsis. Objectives: To compare the conventional blood culture method with the lysis centrifugation method in cases of sepsis. Materials and Methods: Two hundred ...

  19. Selective recovery of molybdenum from spent HDS catalyst using oxidative soda ash leach/carbon adsorption method

    International Nuclear Information System (INIS)

    Park, Kyung Ho; Mohapatra, D.; Reddy, B. Ramachandra

    2006-01-01

    The petroleum refining industry makes extensive use of hydroprocessing catalysts. These catalysts contain environmentally critical and economically valuable metals such as Mo, V, Ni and Co. In the present study, a simple hydrometallurgical processing of spent hydrodesulphurization (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixture was investigated. Recovery of molybdenum was largely dependent on the concentrations of Na 2 CO 3 and H 2 O 2 in the reaction medium, which in turn controls the pH of leach liquor and the presence of Al and Ni as impurities. Under the optimum leaching conditions (40 g L -1 Na 2 CO 3 , 6 vol.% H 2 O 2 , room temperature, 1 h) about 85% recovery of Mo was achieved. The leach liquor was processed by the carbon adsorption method, which selectively adsorbs Mo at pH around 0.75. Desorption of Mo was selective at 15 vol.% NH 4 OH. With a single stage contact, it was found possible to achieve >99%, adsorption and desorption efficiency. Using this method, recovery of molybdenum as MoO 3 product of 99.4% purity was achieved

  20. Energy recovery ventilation as a radon mitigation method for Navy family housing in Guam

    International Nuclear Information System (INIS)

    1993-12-01

    Energy recovery ventilation involves the exchange of contaminated indoor air with fresh, uncontaminated outdoor air with recovery of energy. During radon mitigation diagnostics, air change measurements were performed within three typical Navy family houses, and some were found to be well below recommended minimum standards. The only practical way to solve the indoor air quality problem was to increase the ventilation rate. Options were evaluated, and it was decided to install energy recovery ventilation (ERV) systems. An ERV system is a packaged unit complete with blower fans, controls, and air-to-air heat exchanger. However, because of economical limits on the quantity of conditioned air that can be exchanged, ERV has a finite range of application in radon abatement. In Guam, ERV has potential applications in up to 370 units and in an additional 154 units if the mechanical systems are moved indoors. The performance of ERV systems were evaluated during a demonstration program to determine the removal efficiency of radon

  1. A method to simulate motor control strategies to recover from perturbations: application to a stumble recovery during gait.

    Science.gov (United States)

    Forner-Cordero, Arturo; Ackermann, Marko; de Lima Freitas, Mateus

    2011-01-01

    Perturbations during human gait such as a trip or a slip can result in a fall, especially among frail populations such as the elderly. In order to recover from a trip or a stumble during gait, humans perform different types of recovery strategies. It is very useful to uncover the mechanisms of the recovery to improve training methods for populations at risk of falling. Moreover, human recovery strategies could be applied to implement controllers for bipedal robot walker, as an application of biomimetic design. A biomechanical model of the response to a trip during gait might uncover the control mechanisms underlying the different recovery strategies and the adaptation of the responses found during the execution of successive perturbation trials. This paper introduces a model of stumble in the multibody system framework. This model is used to assess different feedforward strategies to recover from a trip. First of all, normal gait patterns for the musculoskeletal system model are obtained by solving an optimal control problem. Secondly, the reference gait is perturbed by the application of forces on the swinging foot in different ways: as an instantaneous inelastic collision of the foot with an obstacle, as an impulsive horizontal force or using a force curve measured experimentally during gait perturbation experiments. The influence of the type of perturbation, the timing of the collision with respect to the gait cycle, as well as of the coefficient of restitution was investigated previously. Finally, in order to test the effects of different muscle excitation levels on the initial phases of the recovery response, several muscle excitations were added to selected muscles of the legs, thus providing a simulation of the recovery reactions. These results pave the way for future analysis and modeling of the control mechanisms of gait.

  2. Influence of digestion methods on the recovery of Iron, Zinc, Nickel, Chromium, Cadmium and Lead contents in 11 organic residues

    Directory of Open Access Journals (Sweden)

    Thalita Fernanda Abbruzzini

    2014-02-01

    Full Text Available There are currently many devices and techniques to quantify trace elements (TEs in various matrices, but their efficacy is dependent on the digestion methods (DMs employed in the opening of such matrices which, although "organic", present inorganic components which are difficult to solubilize. This study was carried out to evaluate the recovery of Fe, Zn, Cr, Ni, Cd and Pb contents in samples of composts and cattle, horse, chicken, quail, and swine manures, as well as in sewage sludges and peat. The DMs employed were acid digestion in microwaves with HNO3 (EPA 3051A; nitric-perchloric digestion with HNO3 + HClO4 in a digestion block (NP; dry ashing in a muffle furnace and solubilization of residual ash in nitric acid (MDA; digestion by using aqua regia solution (HCl:HNO3 in the digestion block (AR; and acid digestion with HCl and HNO3 + H2O2 (EPA 3050. The dry ashing method led to the greatest recovery of Cd in organic residues, but the EPA 3050 protocol can be an alternative method for the same purpose. The dry ashing should not be employed to determine the concentration of Cr, Fe, Ni, Pb and Zn in the residues. Higher Cr and Fe contents are recovered when NP and EPA 3050 are employed in the opening of organic matrices. For most of the residues analyzed, AR is the most effective method for recovering Ni. Microwave-assisted digestion methods (EPA3051 and 3050 led to the highest recovery of Pb. The choice of the DM that provides maximum recovery of Zn depends on the organic residue and trace element analyzed.

  3. Recovery of precious metals from waste materials by the method of flotation process

    Directory of Open Access Journals (Sweden)

    B. Oleksiak

    2013-01-01

    Full Text Available The article presents the investigation results upon recovery of precious metals from electronics waste and used ceramic catalytic converters. Various frothing agents which generate stable and abundant foam as well as collectors and pH regulators have been used in the investigations. The tests were conducted with the use of laboratory flotation device.

  4. A new method for predicting functional recovery of stroke patients with hemiplegia: logarithmic modelling.

    Science.gov (United States)

    Koyama, Tetsuo; Matsumoto, Kenji; Okuno, Taiji; Domen, Kazuhisa

    2005-10-01

    To examine the validity and applicability of logarithmic modelling for predicting functional recovery of stroke patients with hemiplegia. Longitudinal postal survey. Stroke patients with hemiplegia staying in a long-term rehabilitation facility, who had been referred from acute medical service 30-60 days after onset. Functional Independence Measure (FIM) scores were periodically assessed during hospitalization. For each individual, a logarithmic formula that was scaled by an interval increase in FIM scores during the initial 2-6 weeks was used for predicting functional recovery. For the study, we recruited 18 patients who showed a wide variety of disability levels on admission (FIM scores 25-107). For each patient, the predicted FIM scores derived from the logarithmic formula matched the actual change in FIM scores. The changes predicted the recovery of motor rather than cognitive functions. Regression analysis showed a close fit between logarithmic modelling and actual FIM scores (across-subject R2 = 0.945). Provided with two initial time-point samplings, logarithmic modelling allows accurate prediction of functional recovery for individuals. Because the modelling is mathematically simple, it can be widely applied in daily clinical practice.

  5. METHODS FOR CAECECTOMY OF MUSCOVY DUCKS REGARDING BALANCE EXPERIMENTS OF DIGESTIBILIY ESTABLISHING II. RECOVERY PERIOD

    Directory of Open Access Journals (Sweden)

    Dimo PENKOV

    2007-07-01

    Full Text Available Some indexes of the recovery period of Muscovy ducklings after caecectomy have been studied. It’ established, that the birds recover the water intake 9 hours, the excreting- 12-15 hours after and the feed consumption (by food offering 24 hours after operation – 72-90 hours after the operation.

  6. Improvement of Particle Recovery Method for Uranium Isotope Analysis Using SIMS

    International Nuclear Information System (INIS)

    Kim, Taehee; Park, Jinkyu; Lee, Chi-Gyu; Lim, Sang Ho; Han, Sun-Ho

    2017-01-01

    In this study, we developed a new design of vacuum-suction impactor with wider inlet nozzle and outlet nozzle for guiding particles to disperse the particles on the surface of carbon planchet. We prepared simulated samples with lead dioxide and examined particle recovery yield and degree of dispersion using the conventional vacuum impactor and the newly designed ones with different inlet nozzle diameters. We tried to improve the inlet part of vacuum impactor, in order to increase the recovery yield and disperse the collected particle on carbon planchet. As the diameter of inlet nozzle became larger, the collected particles were better dispersed on planchet. In addition, when the inner diameter of the impactor was 3 mm or 5 mm, the recovery yield was higher than that of conventional impactor. Considering the degree of dispersion and recovery yield, we used the impactor with 5 mm exit diameter and recovered the mixed uranium standard materials for SIMS measurement. We were able to reduce the mixing effect and measure the isotopic ratio more accurately and precisely.

  7. A method of incident angle estimation for high resolution spectral recovery in filter-array-based spectrometers

    Science.gov (United States)

    Kim, Cheolsun; Lee, Woong-Bi; Ju, Gun Wu; Cho, Jeonghoon; Kim, Seongmin; Oh, Jinkyung; Lim, Dongsung; Lee, Yong Tak; Lee, Heung-No

    2017-02-01

    In recent years, there has been an increasing interest in miniature spectrometers for research and development. Especially, filter-array-based spectrometers have advantages of low cost and portability, and can be applied in various fields such as biology, chemistry and food industry. Miniaturization in optical filters causes degradation of spectral resolution due to limitations on spectral responses and the number of filters. Nowadays, many studies have been reported that the filter-array-based spectrometers have achieved resolution improvements by using digital signal processing (DSP) techniques. The performance of the DSP-based spectral recovery highly depends on the prior information of transmission functions (TFs) of the filters. The TFs vary with respect to an incident angle of light onto the filter-array. Conventionally, it is assumed that the incident angle of light on the filters is fixed and the TFs are known to the DSP. However, the incident angle is inconstant according to various environments and applications, and thus TFs also vary, which leads to performance degradation of spectral recovery. In this paper, we propose a method of incident angle estimation (IAE) for high resolution spectral recovery in the filter-array-based spectrometers. By exploiting sparse signal reconstruction of the L1- norm minimization, IAE estimates an incident angle among all possible incident angles which minimizes the error of the reconstructed signal. Based on IAE, DSP effectively provides a high resolution spectral recovery in the filter-array-based spectrometers.

  8. Optimising methods of red cell sedimentation from cord blood to maximise nucleated cell recovery prior to cryopreservation.

    Science.gov (United States)

    Madkaikar, M; Gupta, M; Ghosh, K; Swaminathan, S; Sonawane, L; Mohanty, D

    2007-01-01

    Human cord blood is now an established source of stem cells for haematopoietic reconstitution. Red blood cell (RBC) depletion is required to reduce the cord blood unit volume for commercial banking. Red cell sedimentation using hydroxy ethyl starch (HES) is a standard procedure in most cord blood banks. However, while standardising the procedure for cord blood banking, a significant loss of nucleated cells (NC) may be encountered during standard HES sedimentation protocols. This study compares four procedures for cord blood processing to obtain optimal yield of nucleated cells. Gelatin, dextran, 6% HES and 6% HES with an equal volume of phosphate-buffered saline (PBS) were compared for RBC depletion and NC recovery. Dilution of the cord blood unit with an equal volume of PBS prior to sedimentation with HES resulted in maximum NC recovery (99% [99.5 +/- 1.3%]). Although standard procedures using 6% HES are well established in Western countries, they may not be applicable in India, as a variety of factors that can affect RBC sedimentation (e.g., iron deficiency, hypoalbuminaemia, thalassaemia trait, etc.) may reduce RBC sedimentation and thus reduce NC recovery. While diluting cord blood with an equal volume of PBS is a simple method to improve the NC recovery, it does involve an additional processing step.

  9. Analysis and development of methods for the recovery of tri-n-butylphosphate (TBP)-30%v/v-degraded dodecane

    International Nuclear Information System (INIS)

    Dalston, C.O.

    1984-01-01

    Tri-n-butyl phosphate associated with an inert hydrocarbon is the main solvent used in reprocessing of nuclear irradiated fuel arising of pressurized water reactors. The combined action of radiation and nitric acid cause severe damage to solvent, in reprocessing steps. The recovery of the solvent is, thus, of great importance, since it decreases the amount of the waste and improves the process economy. A comparative analysis of several methods of the recovery of this solvent was carried out, such as: alkaline washing, adsorption with resins, adsorption with aluminium oxide, adsorption by active carbon and adsorption by vermiculite. Some modifications of analytical 95 Zr test and a mathematical definition of two new parameters (degradation grade and efficiency of recovery) were done. Through this modified 95 Zr test, the residence time and the rate of degraded solvent: recuperator were determined. After laboratory tests, vermiculite associated with active carbon was employed for the treatment of 50 liters of tri-n-butyl phosphate (30% V/V)-dodecane, degraded by hydrolysis. Other analyses were performed to check the potentialities of these solids for this solvent recovery. (Author) [pt

  10. Comparison of a radiometric method (BACTEC) and conventional culture media for recovery of mycobacteria from smear-negative specimens

    International Nuclear Information System (INIS)

    Morgan, M.A.; Horstmeier, C.D.; DeYoung, D.R.; Roberts, G.D.

    1983-01-01

    The BACTEC system and three conventional media (Middlebrook 7H10, selective Middlebrook 7H11 [S7H11], and Lowenstein-Jensen [LJ] were compared for their mean recovery times and recovery rates of mycobacteria from acid-fast, smear-negative clinical specimens. Of the 71 smear-negative, culture-positive specimens recovered from 2,165 submitted smear-negative cultures, the BACTEC system detected 71.8%, compared with 88.7% for the conventional three-medium system. When media were individually compared, BACTEC medium (Middlebrook 7H12) was more successful in recovering mycobacteria (71.8%) than was LJ (62%), Middlebrook medium 7H10 (55.9%), or Middlebrook S7H11 medium (52.1%). Middlebrook 7H11 medium containing sodium selenate was also evaluated and did not increase the recovery rate or decrease the recovery time of mycobacterial species when compared with LJ, Middlebrook 7H10, S7H11, and 7H12 media. The mean detection time for the BACTEC system was less than that by conventional methods for the seven species of mycobacteria recovered. Detection times for Mycobacterium tuberculosis on the BACTEC system and conventional cultural systems were 13.7 and 26.3 days, respectively

  11. Use of nuclear process heat from pebble bed high temperature reactors to obtain oil by tertiary recovery methods. Final report. Vol. 2

    International Nuclear Information System (INIS)

    Jaeger, H.; Hermges, H.; Kammel, R.; Kugeler, K.; Phlippen, P.W.; Scheuch, H.; Schmidt, F.; Schmidtlein, P.; Schreiner, P.

    1988-01-01

    Volume II of this report examines: 1. The use of nuclear process heat in the further processing of crude oil (refinery processes, heat coupling, steam reforming helium-heated pipe furnace), 2. Analyses for process questions, 3. Questions of economy, 4. Environmental aspects, 5. Work on underground methanisation. (RB) [de

  12. Method for the recovery of uranium from a concentrate using pure phosphoric acid

    International Nuclear Information System (INIS)

    1980-01-01

    Procedure for the recovery of an uranium bearing concentrate and pure phosphoric acid from a wet process phosphoric acid from the treatment fluid with a precipitation means in conjunction with an organic diluent, the thus formed precipitate to separate and from the remaining mixture of phosphoric acid and diluent the phosphoric acid to extract, characterised in that one applies an inorganic fluorine compound. (G.C.)

  13. A New Method to Individualize Monitoring of Muscle Recovery in Athletes.

    Science.gov (United States)

    Hecksteden, Anne; Pitsch, Werner; Julian, Ross; Pfeiffer, Mark; Kellmann, Michael; Ferrauti, Alexander; Meyer, Tim

    2017-10-01

    Assessment of muscle recovery is essential for the daily fine-tuning of training load in competitive sports, but individual differences may limit the diagnostic accuracy of group-based reference ranges. This article reports an attempt to develop individualized reference ranges using a Bayesian approach comparable to that developed for the Athlete Biological Passport. Urea and creatine kinase (CK) were selected as indicators of muscle recovery. For each parameter, prior distributions and repeated-measures SDs were characterized based on data of 883 squad athletes (1758 data points, 1-8 per athlete, years 2013-2015). Equations for the individualization procedure were adapted from previous material to allow for discrimination of 2 physiological states (recovered vs nonrecovered). Evaluation of classificatory performance was carried out using data from 5 consecutive weekly microcycles in 14 elite junior swimmers and triathletes. Blood samples were collected every Monday (recovered) and Friday according to the repetitive weekly training schedule over 5 wk. On the group level, changes in muscle recovery could be confirmed by significant differences in urea and CK and validated questionnaires. Group-based reference ranges were derived from that same data set to avoid overestimating the potential benefit of individualization. For CK, error rates were significantly lower with individualized classification (P vs group-based: test-pass error rate P = .008; test-fail error rate P < .001). For urea, numerical improvements in error rates failed to reach significance. Individualized reference ranges seem to be a promising tool to improve accuracy of monitoring muscle recovery. Investigating application to a larger panel of indicators is warranted.

  14. Oil recovery from naturally fractured reservoirs by steam injection methods. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Reis, J.C.; Miller, M.A.

    1995-05-01

    Oil recovery by steam injection is a proven, successful technology for nonfractured reservoirs, but has received only limited study for fractured reservoirs. Preliminary studies suggest recovery efficiencies in fractured reservoirs may be increased by as much as 50% with the application of steam relative to that of low temperature processes. The key mechanisms enhancing oil production at high temperature are the differential thermal expansion between oil and the pore volume, and the generation of gases within matrix blocks. Other mechanisms may also contribute to increased production. These mechanisms are relatively independent of oil gravity, making steam injection into naturally fractured reservoirs equally attractive to light and heavy oil deposits. The objectives of this research program are to quantify the amount of oil expelled by these recovery mechanisms and to develop a numerical model for predicting oil recovery in naturally fractured reservoirs during steam injection. The experimental study consists of constructing and operating several apparatuses to isolate each of these mechanisms. The first measures thermal expansion and capillary imbibition rates at relatively low temperature, but for various lithologies and matrix block shapes. The second apparatus measures the same parameters, but at high temperatures and for only one shape. A third experimental apparatus measures the maximum gas saturations that could build up within a matrix block. A fourth apparatus measures thermal conductivity and diffusivity of porous media. The numerical study consists of developing transfer functions for oil expulsion from matrix blocks to fractures at high temperatures and incorporating them, along with the energy equation, into a dual porosity thermal reservoir simulator. This simulator can be utilized to make predictions for steam injection processes in naturally-fractured reservoirs. Analytical models for capillary imbibition have also been developed.

  15. Recovery of kaolinite from tailings of Zonouz kaolin-washing plant by flotation-flocculation method

    OpenAIRE

    Kianoush Barani; Masoud Kalantari

    2018-01-01

    The traditional processing of kaolin is achieved by dispersion of the mined ore and classification by multistage hydrocyclone plants. The inefficiencies inherent to cyclones produce a middling product that is commonly disposed back into the quarry. In this research, recovery of kaolinite from tailings of Zonouz kaolin washing plant, which is located in Iran was investigated by flotation and flotation- flocculation. Flotation experiments show that the flotation of kaolinite from the tailings i...

  16. Preliminary estimations on the heat recovery method for hydrogen production by the high temperature steam electrolysis

    International Nuclear Information System (INIS)

    Koh, Jae Hwa; Yoon, Duck Joo

    2009-01-01

    As a part of the project 'development of hydrogen production technologies by high temperature electrolysis using very high temperature reactor', we have developed an electrolyzer model for high temperature steam electrolysis (HTSE) system and carried out some preliminary estimations on the effects of heat recovery on the HTSE hydrogen production system. To produce massive hydrogen by using nuclear energy, the HTSE process is one of the promising technologies with sulfur-iodine and hybrid sulfur process. The HTSE produces hydrogen through electrochemical reaction within the solid oxide electrolysis cell (SOEC), which is a reverse reaction of solid oxide fuel cell (SOFC). The HTSE system generally operates in the temperature range of 700∼900 .deg. C. Advantages of HTSE hydrogen production are (a) clean hydrogen production from water without carbon oxide emission, (b) synergy effect due to using the current SOFC technology and (c) higher thermal efficiency of system when it is coupled nuclear reactor. Since the HTSE system operates over 700 .deg. C, the use of heat recovery is an important consideration for higher efficiency. In this paper, four different heat recovery configurations for the HTSE system have been investigated and estimated

  17. Effective use of complex secondary recovery methods in operation of small oil fields

    Energy Technology Data Exchange (ETDEWEB)

    Ibragimov, M R; Akulov, V P; Khutorov, A M

    1966-11-01

    The North Sokhs Field, located in the southern part of the Fergen depression, is composed of many horizons and has an anticlinal structure. The eighth horizon has highest oil saturation, with an average porosity of 17% and permeability of 80 md. Poor oil recovery was initially obtained from this horizon because the basic producing mechanism was solution gas drive. In 1961, when reservoir pressure was 94 kg/cmU2D and gas factor was 700-800mU3D/ton, pressure maintenance was initiated by injection of gas to the structure. Gas injection improved oil recovery considerably; however, high gas-oil ratios appeared in several wells. Next, peripheral water injection was started, and continued simultaneously with gas injection. The simultaneous injection of gas and water almost doubled oil production. Because of continued, high produced gas/oil ratios, gas injection was eventually discontinued, while water injection was continued. Water injection is building up reservoir pressure and improving oil recovery.

  18. 2. Tertiary Foraminifera

    NARCIS (Netherlands)

    Umbgrove, J.H.F.

    1931-01-01

    In his review of the palaeozoology of Java, K. Martin could in 1919, record 49 foraminifera from tertiary strata of Java, on the strength of a critical study of the existant literature, and especially on the strength of his own studies and knowledge of the above mentioned fossils (Bibl. 49). In

  19. Development of a higher-order finite volume method for simulation of thermal oil recovery process using moving mesh strategy

    Energy Technology Data Exchange (ETDEWEB)

    Ahmadi, M. [Heriot Watt Univ., Edinburgh (United Kingdom)

    2008-10-15

    This paper described a project in which a higher order up-winding scheme was used to solve mass/energy conservation equations for simulating steam flood processes in an oil reservoir. Thermal recovery processes are among the most complex because they require a detailed accounting of thermal energy and chemical reaction kinetics. The numerical simulation of thermal recovery processes involves localized phenomena such as saturation and temperatures fronts due to hyperbolic features of governing conservation laws. A second order accurate FV method that was improved by a moving mesh strategy was used to adjust for moving coordinates on a finely gridded domain. The Finite volume method was used and the problem of steam injection was then tested using derived solution frameworks on both mixed and moving coordinates. The benefits of using a higher-order Godunov solver instead of lower-order ones were qualified. This second order correction resulted in better resolution on moving features. Preferences of higher-order solvers over lower-order ones in terms of shock capturing is under further investigation. It was concluded that although this simulation study was limited to steam flooding processes, the newly presented approach may be suitable to other enhanced oil recovery processes such as VAPEX, SAGD and in situ combustion processes. 23 refs., 28 figs.

  20. The heat recovery with heat transfer methods from solar photovoltaic systems

    International Nuclear Information System (INIS)

    Özakın, A. N.; Karsli, S.; Kaya, F.; Güllüce, H.

    2016-01-01

    Although there are many fluctuations in energy prices, they seems like rising day by day. Thus energy recovery systems have increasingly trend. Photovoltaic systems converts solar radiation directly into electrical energy thanks to semiconductors. But due to the nature of semiconductors, whole of solar energy cannot turn into electrical energy and the remaining energy turns into waste heat. The aim of this research is evaluate this waste heat energy by air cooling system. So, the energy efficiency of the system will be increased using appropriate heat transfer technologies such as fin, turbulator etc. (paper)

  1. Method for oxygen reduction in a uranium-recovery process. [US DOE patent application

    Science.gov (United States)

    Hurst, F.J.; Brown, G.M.; Posey, F.A.

    1981-11-04

    An improvement in effecting uranium recovery from phosphoric acid solutions is provided by sparging dissolved oxygen contained in solutions and solvents used in a reductive stripping stage with an effective volume of a nonoxidizing gas before the introduction of the solutions and solvents into the stage. Effective volumes of nonoxidizing gases, selected from the group consisting of argon, carbon dioxide, carbon monoxide, helium, hydrogen, nitrogen, sulfur dioxide, and mixtures thereof, displace oxygen from the solutions and solvents thereby reduce deleterious effects of oxygen such as excessive consumption of elemental or ferrous iron and accumulation of complex iron phosphates or cruds.

  2. Semitechnical studies of uranium recovery from wet process phosphoric acid by liquid-liquid-extraction method

    International Nuclear Information System (INIS)

    Poczynajlo, A.; Wlodarski, R.; Giers, M.

    1987-01-01

    A semitechnical installation for uranium recovery from wet process phosphoric acid has been built. The installation is based on technological process comprising 2 extraction cycles, the first with a mixture of mono- and dinonylphenylphosphoric acids (NPPA) and the second with a synergic mixture of di-/2-ethylhexyl/-phosphoric acid (D2EHPA) and trioctylphosphine oxide (TOPO). The installation was set going and the studies on the concentration distributions of uranium and other components of phosphoric acid have been performed for all technological circuits. 23 refs., 15 figs., 3 tabs. (author)

  3. Recovery of kaolinite from tailings of Zonouz kaolin-washing plant by flotation-flocculation method

    Directory of Open Access Journals (Sweden)

    Kianoush Barani

    2018-04-01

    Full Text Available The traditional processing of kaolin is achieved by dispersion of the mined ore and classification by multistage hydrocyclone plants. The inefficiencies inherent to cyclones produce a middling product that is commonly disposed back into the quarry. In this research, recovery of kaolinite from tailings of Zonouz kaolin washing plant, which is located in Iran was investigated by flotation and flotation- flocculation. Flotation experiments show that the flotation of kaolinite from the tailings is better in an acidic than in an alkaline medium containing cationic collectors. Flotation under acidic condition causes problems such as equipment corrosion at industrial scale. As a result, the cationic flotation of kaolinite is enhanced by addition of polyacrylamide as a flocculant. The results showed flocculation by polyacrylamide improved flotation of kaolinite within a range of pH. With 300 g/t dodecylamine, 500 g/t aluminum chloride, 50 g/t pine oil (frother, 15 g/t polyacrylamide, at pH = 7 and without de-slimming a product has 37.19% Al2O3, 54.19% SiO2 and 34.43% mass recovery was archived. Keywords: Kaolinite, Flotation, Flocculation, Cetylpyridinium chloride, Dodecylamine, Aluminum chloride, Polyacrylamide

  4. Development of a recovery method of 131I in the 99Mo process through the fission of 235U

    International Nuclear Information System (INIS)

    Bignardi, Aline Moraes Teixeira

    2013-01-01

    13 1 I is an iodine radioisotope widely used in nuclear medicine that can be used either for diagnostic or for treatment due to its physical decay by β - and its high emission of y-rays. It is produced at IPEN using the indirect reaction: 130 Te(n,y) 131m Te → 131 Te → 131 I where TeO 2 targets are irradiated in a Nuclear Reactor. There is also the possibility of producing 131 I by the fission of 235 U, where about 300 different elements are produced together with 131 I. The 131 I produced through this method presents high specific activity and radioactive concentration suitable for the labeling of molecules. The aim of this work was to develop a recovery method of 131 I with the required quality to be used in Nuclear Medicine in the 99 Mo production process through the route of acid dissolution of metallic 235 U targets. 131 I can appear in two phases of the process, both in the gaseous phase produced during the dissolution of metallic U targets and in the dissolution solution. This work studied the recovery of 131 I in these two phases. Several materials were used for the capture and recovery of 131 I at the two phases of the process, the gaseous one and the solution of dissolution of U targets. Columns of alumina with Cu, acid alumina with Cu, Ag microspheres, Cu microspheres, Ag nanospheres, anionic cartridges, Ag cartridges, anion exchange resin and activated charcoal columns were tested. Solutions containing 131 I in 0.1 mol.L -1 NaOH were percolated through the materials and the eluted solutions were analyzed in a dose calibrator. The precipitation of AgI was also studied wth further dissolution of this precipitate with 0.1 mol L -1 NH 4 OH and 5% Na 2 S 2 O 3 . The recovery results varied according to the material, activated charcoal showed recovery yields between 42% and 83% but the recovery yield of the alumina column with Cu ranged from 20% to 85%. Tests with Ag nanospheres showed recovery yield of 26% using 0.1 mol L -1 NaOH and 72% for Na 2 S 2 O

  5. Ensuring Effective Mentoring in Tertiary Institutions in Anambra State ...

    African Journals Online (AJOL)

    This paper concerns itself only with ascertaining the strategies that could ensure effective mentoring in tertiary institutions. The survey method was employed. The study population comprised 78 teacher educators in tertiary institutions in Anambra State. One research question guided the study while one null hypothesis was ...

  6. New calculation method to solve moisture balance in the room with regenerator heat recovery and infiltration

    DEFF Research Database (Denmark)

    Pomianowski, Michal Zbigniew; Heiselberg, Per; Drivsholm, Christian

    2017-01-01

    This paper investigates moisture related performance of a regenerator heat exchanger located in a decentralized ventilation unit for residential building application. The decentralized ventilation solutions have recently become a more and more popular alternative to centralized ventilation systems...... in air handling units (AHUs). In the case of regenerator heat exchanger, the higher the heat recovery efficiency obtained the higher risk that condensation might occur. This condensation might form small droplets on the surface of the regenerator that might not be possible to drain in the short switching...... time of the regenerator and consequently might be evaporated in the next cycle back to the building and cause elevated humidity conditions in the indoor spaces. Due to the fact that the traditionally used dilution equation must not be used to solve moisture balance in the room with regenerator heat...

  7. Recovery of uranium from the Syrian phosphate by solid-liquid method using alkaline solutions

    International Nuclear Information System (INIS)

    Shlewit, H.; Alibrahim, M.

    2007-01-01

    Uranium concentrations were analyzed in the Syrian phosphate deposits. Mean concentrations were found between 50 and 110 ppm. As a consequence, an average phosphate dressing of 22 kg/ha phosphate would charge the soil with 5-20 g/ha uranium when added as a mineral fertilizer. Fine grinding phosphate produced at the Syrian mines was used for uranium recovery by carbonate leaching. The formation of the soluble uranyl tricarbonate anion UO 2 (CO 3 ) 3 4- permits use of alkali solutions of sodium carbonate and sodium bicarbonate salts for the nearly selective dissolution of uranium from phosphate. Separation of iron, aluminum, titanium, etc., from the uranium during leaching was carried out. Formation of some small amounts of molybdates, vanadates, phosphates, aluminates, and some complexes metal was investigated. This process could be used before the manufacture of TSP fertilizer, and the final products would contain smaller uranium quantities. (author)

  8. Development of alkaline/surfactant/polymer (ASP flooding technology for recovery of Karazhanbas oil

    Directory of Open Access Journals (Sweden)

    Birzhan Zhappasbaev

    2016-03-01

    Full Text Available The tertiary oil recovery methods like alkaline, surfactant and polymer (ASP flooding are very perspective in order to achieve the synergetic effect out of the different impacts which are caused by these chemicals, which affect oil and water filtration in the reservoir and increase oil recovery. In this communication, we consider the applicability of hydrophobically modified polyampholyte – poly(hexadecylaminocrotonatebetaine (PHDACB as ASP flooding agent for recovery of oil from Karazhanbas oilfield. As “polysoap”, the aqueous solution of PHDACB dissolved in aqueous KOH was used. This system combines the advantages of alkaline, surfactant and polymer and exhibits the synergistic effect. The laboratory results showed that the ASP flooding considerably increases the oil recovery in addition to water flooding. In perspective, the ASP flooding may substitute the steam injection and other thermal enhanced oil recovery (EOR technologies.

  9. EM-SAGD/EM-GD : electromagnetic heating method : sustainable improvement of in-situ bitumen recovery

    Energy Technology Data Exchange (ETDEWEB)

    Wacker, B.; Diehl, D.; Huber, N.; Torlak, M.; Koolman, M. [Siemens AG, Munich (Germany)

    2010-07-01

    This paper described an electro-magnetic heating technology for the in situ recovery of bitumen. Studies have indicated that the technology promises a higher yield of bitumen with a smaller surface footprint than other bitumen production technologies. A laboratory study conducted with an inductor loop embedded in a 1 meter{sup 3} sand-box demonstrated that the technology is technically feasible. A series of field tests were then conducted by Siemens in a conductive subsurface later in Deggendorf, Germany. The field test included remotely operated surface equipment that was tested under down-scaled field conditions over a period of 6 months. New fiber optic sensors were used to obtain underground temperature readings. The field tests demonstrated a rise in temperature caused by the induction of eddy currents through electromagnetic fields in the conductive sub-surface. Results of the study will be used at an oil sands reservoir in 2011. The process can be combined with steam assisted gravity drainage (SAGD) processes. 4 refs., 7 figs.

  10. Recovery of oil from oil-in-water emulsion using biopolymers by adsorptive method.

    Science.gov (United States)

    Elanchezhiyan, S Sd; Sivasurian, N; Meenakshi, Sankaran

    2014-09-01

    In the present study, it is aimed to identify, a low cost sorbent for the recovery of oil from oil-in-water emulsion using biopolymers such as chitin and chitosan. Chitin has the greater adsorption capacity than chitosan due to its hydrophobic nature. The characterizations of chitin and chitosan were done using FTIR, SEM, EDAX, XRD, TGA and DSC techniques. Under batch equilibrium mode, a systematic study was performed to optimize the various equilibrium parameters viz., contact time, pH, dosage, initial concentration of oil, and temperature. The adsorption process reached equilibrium at 40 min of contact time and the percentage removal of oil was found to be higher (90%) in the acidic medium. The Freundlich and Langmuir models were applied to describe the equilibrium isotherms and the isotherm constants were calculated. Thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated to find out the nature of the sorption mechanism. The kinetic studies were investigated with reaction-based and diffusion-based models. The suitable mechanism for the removal of oil has been established. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Recovery process of cathode material of the spent lithium-ion batteries using Pechini methods

    International Nuclear Information System (INIS)

    Polo Fonseca, C.; Prado, R.M.; Santos Junior, G.A.; Marques, E.C.; Neves, S.

    2010-01-01

    This work proposes a new process of recovering LiCoO 2 from spent Li-ion batteries (LIBs) by a combination of acid leaching and Pechini synthesis, as an alternative process to improve the recovery efficiency of LiCoO 2 and reduce energy consumption and pollution. The effects of calcination temperature and lithium acetate addition in the synthesis on the structure and morphology of LiCoO 2 powders were characterized by X-ray diffraction, Raman spectroscopy and scanning electron microscopy. According to the analysis, the crystallinity of LiCoO 2 powders depends on the calcination temperature. The results indicate the layered HT-LiCoO 2 powders can be obtained at 750 deg C for 24 h in oxygen with lithium salt addition. Cyclic voltammograms showed one reversible redox process at 4.0/3.85 V for the LiCoO 2 obtained with lithium addition in the synthesis and irreversible redox process for the LiCoO 2 obtained without lithium addition. (author)

  12. Technological methods for the combined recovery of spent fuel elements from thermal neutron atomic reactors

    Energy Technology Data Exchange (ETDEWEB)

    Shevchenko, V B; Smelov, V S; Kozlov, A G; Smetanin, E Ya; Chubukov, V V; Anisimov, V I

    1976-01-01

    Results are presented for using a two-cycle extraction process to recover the uranium from a water-moderated nuclear-plant fuel cell after it had cooled 14 months. The general schematic is as follows: dissolution of the fuel in nitric acid; simultaneous extraction of U, Pu, and Np with tributyl phosphate; reduction with hydrazine and re-extraction of Pu and Np and their selective elution; re-examination of U; the regeneration of the extractant and beginning of the second cycle. The purification coefficients of U from other ..gamma..-radiating products and from Pu were equal to 1.4 x 10/sup 7/ and 5.5 x 10/sup 5/. The losses of U, Pu, and Np with the washing solutions were 0.007, 0.024, and 3.4% respectively of the initial amount. An analogous extraction process is discussed for separating Sr, Am, Cm, and the rare earth elements. A recovery of 92 to 95% of each of the four is effected.

  13. Recovery of microbial community structure and functioning after wildfire in semi-arid environments: optimising methods for monitoring and assessment

    Science.gov (United States)

    Muñoz-Rojas, Miriam; Martini, Dylan; Erickson, Todd; Merritt, David; Dixon, Kingsley

    2015-04-01

    Introduction In semi-arid areas such as northern Western Australia, wildfires are a natural part of the environment and many ecosystems in these landscapes have evolved and developed a strong relationship with fire. Soil microbial communities play a crucial role in ecosystem processes by regulating the cycling of nutrients via decomposition, mineralization, and immobilization processes. Thus, the structure (e.g. soil microbial biomass) and functioning (e.g. soil microbial activity) of microbial communities, as well as their changes after ecosystem disturbance, can be useful indicators of soil quality and health recovery. In this research, we assess the impacts of fire on soil microbial communities and their recovery in a biodiverse semi-arid environment of Western Australia (Pilbara region). New methods for determining soil microbial respiration as an indicator of microbial activity and soil health are also tested. Methodology Soil samples were collected from 10 similar ecosystems in the Pilbara with analogous native vegetation, but differing levels of post-fire disturbance (i.e. 3 months, 1 year, 5, 7 and 14 years after wildfire). Soil microbial activity was measured with the Solvita test which determines soil microbial respiration rate based on the measurement of the CO2 burst of a dry soil after it is moistened. Soils were dried and re-wetted and a CO2 probe was inserted before incubation at constant conditions of 25°C during 24 h. Measurements were taken with a digital mini spectrometer. Microbial (bacteria and fungi) biomass and community composition were measured by phospholipid fatty acid analysis (PLFA). Results Immediately after the fire (i.e. 3 months), soil microbial activity and microbial biomass are similar to 14 years 'undisturbed' levels (53.18±3.68 ppm CO2-CO and 14.07±0.65 mg kg-1, respectively). However, after the first year post-fire, with larger plant productivity, microbial biomass and microbial activity increase rapidly, peaking after 5

  14. Calculations for Adjusting Endogenous Biomarker Levels During Analytical Recovery Assessments for Ligand-Binding Assay Bioanalytical Method Validation.

    Science.gov (United States)

    Marcelletti, John F; Evans, Cindy L; Saxena, Manju; Lopez, Adriana E

    2015-07-01

    It is often necessary to adjust for detectable endogenous biomarker levels in spiked validation samples (VS) and in selectivity determinations during bioanalytical method validation for ligand-binding assays (LBA) with a matrix like normal human serum (NHS). Described herein are case studies of biomarker analyses using multiplex LBA which highlight the challenges associated with such adjustments when calculating percent analytical recovery (%AR). The LBA test methods were the Meso Scale Discovery V-PLEX® proinflammatory and cytokine panels with NHS as test matrix. The NHS matrix blank exhibited varied endogenous content of the 20 individual cytokines before spiking, ranging from undetectable to readily quantifiable. Addition and subtraction methods for adjusting endogenous cytokine levels in %AR calculations are both used in the bioanalytical field. The two methods were compared in %AR calculations following spiking and analysis of VS for cytokines having detectable endogenous levels in NHS. Calculations for %AR obtained by subtracting quantifiable endogenous biomarker concentrations from the respective total analytical VS values yielded reproducible and credible conclusions. The addition method, in contrast, yielded %AR conclusions that were frequently unreliable and discordant with values obtained with the subtraction adjustment method. It is shown that subtraction of assay signal attributable to matrix is a feasible alternative when endogenous biomarkers levels are below the limit of quantitation, but above the limit of detection. These analyses confirm that the subtraction method is preferable over that using addition to adjust for detectable endogenous biomarker levels when calculating %AR for biomarker LBA.

  15. Evaluation of improved chemical waste disposal and recovery methods for N reactor fuel fabrication operations: 1984 annual report

    International Nuclear Information System (INIS)

    Stewart, T.L.; Hartley, J.N.

    1984-12-01

    Pacific Northwest Laboratory personnel identified and evaluated alternative methods for recovery, recycle, and disposal of waste acids produced during N Reactor fuel operations. This work was conducted under a program sponsored by UNC Nuclear Industries, Inc.; the program goals were to reduce the volume of liquid waste by rejuvenating and recycling acid solutions and to generate a residual waste low in nitrates, fluorides, and metals. Disposal methods under consideration included nitric acid reclamation, grout encapsulation of final residual waste, nitrogen fertilizer production, biodenitrifaction, chemical or thermal destruction of NO 3 , and short-term impoundment of liquid NO 3 /SO 4 wastes. Preliminary testing indicated that the most feasible and practicable of these alternatives were (1) nitric acid reclamation followed by grouting of residual waste and (2) nitrogen fertilizer production. This report summarizes the investigations, findings, and recommendations for the 1984 fiscal year

  16. Development a recovery method of {sup 13I} from the {sup 23}'5U fission products

    Energy Technology Data Exchange (ETDEWEB)

    Bignardi, Aline M.T.; Osso Junior, Joao Alberto, E-mail: alinebignardi@yahoo.com.br, E-mail: jaosso@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    {sup 13I} is a iodine radioisotope widely used in nuclear medicine that can be used either for diagnostic or for treatment due to its physical decay by β- and its high emission of rays-γ. It is produced at IPEN through the irradiation of TeO{sub 2} targets in the IEA-R1 nuclear reactor. There is also the possibility produced it by the fission of {sup 235}U. The aim of this work is to develop a recovery method of {sup 13I} in the production process of {sup 99}Mo through the route of acid dissolution of {sup 235}U targets, with the quality to be used in Nuclear Medicine. {sup 13I} finds itself in two stages of the process, either in the gaseous produced in the acid dissolution of metallic U targets and the smallest part in solution. In this work was studied the recovery of {sup 131} in these two stages. Several materials were used for the capture and recovery of {sup 13I} at the two phases of the process. Anionic cartridges, Ag cartridges, anion exchange resin, activated charcoal columns and AgI precipitation were tested. Solutions with {sup 13}'1I in 0.1 mol.L{sup -1} NaOH were percolated through the materials and the eluted solutions were analyzed in a dose calibrator. Among all the tests that were executed, at first, the anion exchange resin and AgI precipitation have showed the best retention result (100%). The results of elution have varied according to the material, the activated charcoal presented a elution yield between 70% and 82% At first, it is possible to conclude that anion exchange resin and AgI precipitation show better results for {sup 13I} retention and the column and activated charcoal have a great potential for the elution of {sup 131} in the right chemical state. (author)

  17. West Hackberry Tertiary Project. Annual report, September 3, 1997--September 2, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Gillham, T.H.

    1997-09-10

    The following report is the Project Management Plan for the fifth year of the West Hackberry Tertiary Project. The West Hackberry Tertiary Project is one of four mid-term projects selected by the United States Department of Energy (DOE) as part of the DOE`s Class 1 Program for the development of advance recovery technologies in fluvial dominated deltaic reservoirs. The West Hackberry Tertiary Project is a field test of the idea that air injection can be combined with the Double Displacement Process to produce a low cost tertiary recovery process which is economic at current oil prices. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering tertiary oil by gravity drainage. The Double Displacement Process is based upon the concept that in fields such as West Hackberry waterdrive recoveries are typically 50%-60% of the original oil in place while gravity drainage recoveries average 80%-90% of the original oil in place. Therefore, by injecting a gas into a watered out reservoir, a gas cap will form an additional oil can be recovered due to gravity drainage. Although the Double Displacement Process has been shown to be successful in recovering tertiary oil in other fields, this project will be the first to utilize air injection in the Double Displacement Process. The use of air injection in this process combines the benefits of air`s low cost and universal accessibility with the potential for accelerated oil recovery due to the combustion process. If successful, this project will demonstrate that the use of air injection in the Double Displacement Process will result in an economically viable tertiary process in reservoirs where tertiary oil recovery is presently uneconomical.

  18. Assessment of Soil Erosion Methods for Sludge Recovery, Savannah River Site

    National Research Council Canada - National Science Library

    Smith, Lawson

    1997-01-01

    ...) from selected storage tanks at the Savannah River Site (SRS) was assessed conceptually. Soil erosion methods are defined as the processes of soil detachment, entrainment, transport, and deposition...

  19. Determination of avermectins by the internal standard recovery correction - high performance liquid chromatography - quantitative Nuclear Magnetic Resonance method.

    Science.gov (United States)

    Zhang, Wei; Huang, Ting; Li, Hongmei; Dai, Xinhua; Quan, Can; He, Yajuan

    2017-09-01

    Quantitative Nuclear Magnetic Resonance (qNMR) is widely used to determine the purity of organic compounds. For the compounds with lower purity especially molecular weight more than 500, qNMR is at risk of error for the purity, because the impurity peaks are likely to be incompletely separated from the peak of major component. In this study, an offline ISRC-HPLC-qNMR (internal standard recovery correction - high performance liquid chromatography - qNMR) was developed to overcome this problem. It is accurate by excluding the influence of impurity; it is low-cost by using common mobile phase; and it extends the applicable scope of qNMR. In this method, a mix solution of the sample and an internal standard was separated by HPLC with common mobile phases, and only the eluents of the analyte and the internal standard were collected in the same tube. After evaporation and re-dissolution, it was determined by qNMR. A recovery correction factor was determined by comparison of the solutions before and after these procedures. After correction, the mass fraction of analyte was constant and it was accurate and precise, even though the sample loss varied during these procedures, or even in bad resolution of HPLC. Avermectin B 1 a with the purity of ~93% and the molecular weight of 873 was analyzed. Moreover, the homologues of avermectin B 1 a were determined based on the identification and quantitative analysis by tandem mass spectrometry and HPLC, and the results were consistent with the results of traditional mass balance method. The result showed that the method could be widely used for the organic compounds, and could further promote qNMR to become a primary method in the international metrological systems. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. The Naturoptic Method for Safe Recovery of Vision: Mentored Tutoring, Earnings, Academic Entity Financial Resources Tool

    Science.gov (United States)

    Sambursky, Nicole D.; McLeod, Roger David; Silva, Sandra Helena

    2009-05-01

    This is a novel method for safely and naturally improving vision. with applications for minority, female, and academic entity, financial advantages. The patented Naturoptic Method is a simple system designed to work quickly, requiring only a minimal number of sessions for improvement. Our mentored and unique activities investigated these claims by implementing the Naturoptic method on ourselves over a period of time. Research was conducted at off campus locations with the inventor of the Naturoptic Method. Initial visual acuity and subsequent progress is self assessed, using standard Snellen Eye Charts. Research is designed to document improvements in vision with successive uses of the Naturoptic Method, as mentored teachers or Awardees of ``The Kaan Balam Matagamon Memorial Award,'' with net earnings shared by the designees, academic entities, the American Indians in Science and Engineering Society, AISES, or charity. The Board requires Awardees, its students, or affiliates, to sign non-disclosure agreements. 185/1526

  1. 40 CFR Appendix C to Subpart F of... - Method for Testing Recovery Devices for Use With Small Appliances

    Science.gov (United States)

    2010-07-01

    ... for Use With Small Appliances C Appendix C to Subpart F of Part 82 Protection of Environment... Recovery Devices for Use With Small Appliances Recovery Efficiency Test Procedure for Refrigerant Recovery Equipment Used on Small Appliances The following test procedure is utilized to evaluate the efficiency of...

  2. Comparison of three methods for recovery of Brucella canis DNA from canine blood samples.

    Science.gov (United States)

    Batinga, Maria Cryskely A; Dos Santos, Jaíne C; Lima, Julia T R; Bigotto, Maria Fernanda D; Muner, Kerstin; Faita, Thalita; Soares, Rodrigo M; da Silva, David A V; Oliveira, Trícia M F S; Ferreira, Helena L; Diniz, Jaqueline A; Keid, Lara B

    2017-12-01

    Brucella canis, a gram-negative, facultative intracellular and zoonotic bacterium causes canine brucellosis. Direct methods are the most appropriate for the detection of canine brucellosis and bacterial isolation from blood samples has been employed as gold-standard method. However, due to the delay in obtaining results and the biological risk of the bacterial culturing, the polymerase chain reaction (PCR) has been successfully used as an alternative method for the diagnosis of the infection. Sample preparation is a key step for successful PCR and protocols that provide high DNA yield and purity are recommended to ensure high diagnostic sensitivity. The objective of this study was to evaluate the performance of PCR for the diagnosis of B. canis infection in 36 dogs by testing DNA of whole blood obtained through different extraction and purification protocols. Methods 1 and 2 were based on a commercial kit, using protocols recommended for DNA purification of whole blood and tissue samples, respectively. Method 3 was an in-house method based on enzymatic lysis and purification using organic solvents. The results of the PCR on samples obtained through three different DNA extraction protocols were compared to the blood culture. Of the 36 dogs, 13 (36.1%) were positive by blood culturing, while nine (25.0%), 14 (38.8%), and 15 (41.6%) were positive by PCR after DNA extraction using methods 1, 2 and 3, respectively. PCR performed on DNA purified by Method 2 was as efficient as blood culturing and PCR performed on DNA purified with in-house method, but had the advantage of being less laborious and, therefore, a suitable alternative for the direct B. canis detection in dogs. Copyright © 2017. Published by Elsevier B.V.

  3. A comparative study of conventional and supercritical fluid extraction methods for the recovery of secondary metabolites from Syzygium campanulatum Korth#

    Science.gov (United States)

    Memon, Abdul Hakeem; Hamil, Mohammad Shahrul Ridzuan; Laghari, Madeeha; Rithwan, Fahim; Zhari, Salman; Saeed, Mohammed Ali Ahmed; Ismail, Zhari; Majid, Amin Malik Shah Abdul

    2016-01-01

    Syzygium campanulatum Korth is a plant, which is a rich source of secondary metabolites (especially flavanones, chalcone, and triterpenoids). In our present study, three conventional solvent extraction (CSE) techniques and supercritical fluid extraction (SFE) techniques were performed to achieve a maximum recovery of two flavanones, chalcone, and two triterpenoids from S. campanulatum leaves. Furthermore, a Box-Behnken design was constructed for the SFE technique using pressure, temperature, and particle size as independent variables, and yields of crude extract, individual and total secondary metabolites as the dependent variables. In the CSE procedure, twenty extracts were produced using ten different solvents and three techniques (maceration, soxhletion, and reflux). An enriched extract of five secondary metabolites was collected using n-hexane:methanol (1:1) soxhletion. Using food-grade ethanol as a modifier, the SFE methods produced a higher recovery (25.5%‒84.9%) of selected secondary metabolites as compared to the CSE techniques (0.92%‒66.00%). PMID:27604860

  4. A comparative study of conventional and supercritical fluid extraction methods for the recovery of secondary metabolites from Syzygium campanulatum Korth.

    Science.gov (United States)

    Memon, Abdul Hakeem; Hamil, Mohammad Shahrul Ridzuan; Laghari, Madeeha; Rithwan, Fahim; Zhari, Salman; Saeed, Mohammed Ali Ahmed; Ismail, Zhari; Majid, Amin Malik Shah Abdul

    2016-09-01

    Syzygium campanulatum Korth is a plant, which is a rich source of secondary metabolites (especially flavanones, chalcone, and triterpenoids). In our present study, three conventional solvent extraction (CSE) techniques and supercritical fluid extraction (SFE) techniques were performed to achieve a maximum recovery of two flavanones, chalcone, and two triterpenoids from S. campanulatum leaves. Furthermore, a Box-Behnken design was constructed for the SFE technique using pressure, temperature, and particle size as independent variables, and yields of crude extract, individual and total secondary metabolites as the dependent variables. In the CSE procedure, twenty extracts were produced using ten different solvents and three techniques (maceration, soxhletion, and reflux). An enriched extract of five secondary metabolites was collected using n-hexane:methanol (1:1) soxhletion. Using food-grade ethanol as a modifier, the SFE methods produced a higher recovery (25.5%‒84.9%) of selected secondary metabolites as compared to the CSE techniques (0.92%‒66.00%).

  5. Application of Biosurfactants Produced by Pseudomonas putida using Crude Palm Oil (CPO) as Substrate for Crude Oil Recovery using Batch Method

    Science.gov (United States)

    Suryanti, V.; Handayani, D. S.; Masykur, A.; Septyaningsih, I.

    2018-03-01

    The application of biosurfactants which have been produced by Pseudomonas putida in nutrient broth medium supplemented with NaCl and crude palm oil (CPO) for oil recovery has been evaluated. The crude and purified biosurfactants have been examined for oil recovery from a laboratory oil-contaminated sand in agitated flask (batch method). Two synthetic surfactants and water as control was also performed for oil recovery as comparisons. Using batch method, the results showed that removing ability of crude oil from the oil-contaminated sand by purified and crude biosurfactants were 79.40±3.10 and 46.84±2.23 %, respectively. On other hand, the recoveries obtained with the SDS, Triton X-100 and water were 94.33±0.47, 74.84±7.39 and 34.42±1.21%respectively.

  6. Backtracking-Based Iterative Regularization Method for Image Compressive Sensing Recovery

    Directory of Open Access Journals (Sweden)

    Lingjun Liu

    2017-01-01

    Full Text Available This paper presents a variant of the iterative shrinkage-thresholding (IST algorithm, called backtracking-based adaptive IST (BAIST, for image compressive sensing (CS reconstruction. For increasing iterations, IST usually yields a smoothing of the solution and runs into prematurity. To add back more details, the BAIST method backtracks to the previous noisy image using L2 norm minimization, i.e., minimizing the Euclidean distance between the current solution and the previous ones. Through this modification, the BAIST method achieves superior performance while maintaining the low complexity of IST-type methods. Also, BAIST takes a nonlocal regularization with an adaptive regularizor to automatically detect the sparsity level of an image. Experimental results show that our algorithm outperforms the original IST method and several excellent CS techniques.

  7. An Improved DNA Extraction Method for Efficient and Quantitative Recovery of Phytoplankton Diversity in Natural Assemblages.

    Directory of Open Access Journals (Sweden)

    Jian Yuan

    Full Text Available Marine phytoplankton are highly diverse with different species possessing different cell coverings, posing challenges for thoroughly breaking the cells in DNA extraction yet preserving DNA integrity. While quantitative molecular techniques have been increasingly used in phytoplankton research, an effective and simple method broadly applicable to different lineages and natural assemblages is still lacking. In this study, we developed a bead-beating protocol based on our previous experience and tested it against 9 species of phytoplankton representing different lineages and different cell covering rigidities. We found the bead-beating method enhanced the final yield of DNA (highest as 2 folds in comparison with the non-bead-beating method, while also preserving the DNA integrity. When our method was applied to a field sample collected at a subtropical bay located in Xiamen, China, the resultant ITS clone library revealed a highly diverse assemblage of phytoplankton and other micro-eukaryotes, including Archaea, Amoebozoa, Chlorophyta, Ciliphora, Bacillariophyta, Dinophyta, Fungi, Metazoa, etc. The appearance of thecate dinoflagellates, thin-walled phytoplankton and "naked" unicellular organisms indicates that our method could obtain the intact DNA of organisms with different cell coverings. All the results demonstrate that our method is useful for DNA extraction of phytoplankton and environmental surveys of their diversity and abundance.

  8. Development of a multi-functional reprocessing process based on ion-exchange method by using tertiary pyridine-type resin

    International Nuclear Information System (INIS)

    Koyama, Shin-ichi; Ozawa, Masaki; Suzuki, Tatsuya; Fujii, Yasuhiko

    2006-01-01

    A series of separation experiment was performed in order to study a multi-functional spent fuel reprocessing process based on ion-exchange technique. The tertiary pyridine-type anion-exchange resin was used in this experiment and the mixed oxide fuel highly irradiated in the experimental fast reactor ''JOYO'' was used as a reference spent fuel. As the result, 106 Ru + 125 Sb, 137 Cs + 155 Eu + 144 Ce, plutonium, americium and curium could be separated from the irradiated fuel by only three steps of ion-exchange. The decontamination factor of 137 Cs and trivalent lanthanides ( 155 Eu, 144 Ce) in the final americium product exceeded 3.9 x 10 4 and 1.0 x 10 5 , respectively. The decontamination factor for the mutual separation of 243 Cm and 241 Am was larger than 2.2 x 10 3 for the americium product and, moreover, the content of 137 Cs, trivalent lanthanides and 243 Cm included in 241 Am product did not exceed 2 ppm. These results prove that the proposed simplified separation process has a reality as a candidate for future reprocessing process based on the partitioning and transmutation concept. (author)

  9. Sound recovery via intensity variations of speckle pattern pixels selected with variance-based method

    Science.gov (United States)

    Zhu, Ge; Yao, Xu-Ri; Qiu, Peng; Mahmood, Waqas; Yu, Wen-Kai; Sun, Zhi-Bin; Zhai, Guang-Jie; Zhao, Qing

    2018-02-01

    In general, the sound waves can cause the vibration of the objects that are encountered in the traveling path. If we make a laser beam illuminate the rough surface of an object, it will be scattered into a speckle pattern that vibrates with these sound waves. Here, an efficient variance-based method is proposed to recover the sound information from speckle patterns captured by a high-speed camera. This method allows us to select the proper pixels that have large variances of the gray-value variations over time, from a small region of the speckle patterns. The gray-value variations of these pixels are summed together according to a simple model to recover the sound with a high signal-to-noise ratio. Meanwhile, our method will significantly simplify the computation compared with the traditional digital-image-correlation technique. The effectiveness of the proposed method has been verified by applying a variety of objects. The experimental results illustrate that the proposed method is robust to the quality of the speckle patterns and costs more than one-order less time to perform the same number of the speckle patterns. In our experiment, a sound signal of time duration 1.876 s is recovered from various objects with time consumption of 5.38 s only.

  10. Analysis of selected methods for the recovery of encrypted WEP key

    Science.gov (United States)

    Wójtowicz, Sebastian; Belka, Radosław

    2014-11-01

    This paper deals with some of the WEP (Wired Equivalent Privacy) key decryption methods based on aircrack-ng software, which was embedded in Backtrack operating system (Linux distribution). The 64-bit (40-bit) and 128-bit (104- bit) key encrypted with RC4 cipher weakness was shown. Research methods were made in different network environments. In this work we compared different types of keys to check how strong the RC4 stream cipher can be. The 40-bit and 104-bit WEP key has been tested on IEEE 802.11 based wireless LAN using laptop with live-CD Linux operating system. A short analysis of key creation methods was performed to compare the amount of time necessary to decrypt random and nonrandom WEP keys.

  11. Effect of health education on knowledge and attitude of tertiary ...

    African Journals Online (AJOL)

    Background: In order to make good decisions about their sexual and ... of health education on the knowledge and attitude of tertiary school students towards sexually ... Methods: The study employed a quasi-experimental study design in which ...

  12. Method for the simultaneous recovery of radionuclides from liquid radioactive wastes using a solvent

    Science.gov (United States)

    Romanovskiy, Valeriy Nicholiavich; Smirnov, Igor V.; Babain, Vasiliy A.; Todd, Terry A.; Brewer, Ken N.

    2001-01-01

    The present invention relates to solvents, and methods, for selectively extracting and recovering radionuclides, especially cesium and strontium, rare earths and actinides from liquid radioactive wastes. More specifically, the invention relates to extracting agent solvent compositions comprising complex organoboron compounds, substituted polyethylene glycols, and neutral organophosphorus compounds in a diluent. The preferred solvent comprises a chlorinated cobalt dicarbollide, diphenyl-dibutylmethylenecarbamoylphosphine oxide, PEG-400, and a diluent of phenylpolyfluoroalkyl sulfone. The invention also provides a method of using the invention extracting agents to recover cesium, strontium, rare earths and actinides from liquid radioactive waste.

  13. Efficient recovery of environmental DNA for expression cloning by indirect extraction methods

    NARCIS (Netherlands)

    Gabor, Esther; de Vries, Erik; Janssen, DB

    2003-01-01

    Using direct and cell extraction-based (indirect) isolation methods, DNA was obtained from environmental samples with largely differing characteristics (loam soil, sand soil, sediment, activated sludge, and compost) and evaluated with respect to the comprised bacterial diversity and its suitability

  14. A new method for the recovery and evidential comparison of footwear impressions using 3D structured light scanning.

    Science.gov (United States)

    Thompson, T J U; Norris, P

    2018-05-01

    Footwear impressions are one of the most common forms of evidence to be found at a crime scene, and can potentially offer the investigator a wealth of intelligence. Our aim is to highlight a new and improved technique for the recovery of footwear impressions, using three-dimensional structured light scanning. Results from this preliminary study demonstrate that this new approach is non-destructive, safe to use and is fast, reliable and accurate. Further, since this is a digital method, there is also the option of digital comparison between items of footwear and footwear impressions, and an increased ability to share recovered footwear impressions between forensic staff thus speeding up the investigation. Copyright © 2018 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

  15. Methods for chemical recovery of non-carrier-added radioactive tin from irradiated intermetallic Ti-Sb targets

    Science.gov (United States)

    Lapshina, Elena V [Troitsk, RU; Zhuikov, Boris L [Troitsk, RU; Srivastava, Suresh C [Setauket, NY; Ermolaev, Stanislav V [Obninsk, RU; Togaeva, Natalia R [Obninsk, RU

    2012-01-17

    The invention provides a method of chemical recovery of no-carrier-added radioactive tin (NCA radiotin) from intermetallide TiSb irradiated with accelerated charged particles. An irradiated sample of TiSb can be dissolved in acidic solutions. Antimony can be removed from the solution by extraction with dibutyl ether. Titanium in the form of peroxide can be separated from tin using chromatography on strong anion-exchange resin. In another embodiment NCA radiotin can be separated from iodide solution containing titanium by extraction with benzene, toluene or chloroform. NCA radiotin can be finally purified from the remaining antimony and other impurities using chromatography on silica gel. NCA tin-117m can be obtained from this process. NCA tin-117m can be used for labeling organic compounds and biological objects to be applied in medicine for imaging and therapy of various diseases.

  16. Predictability of the recent slowdown and subsequent recovery of large-scale surface warming using statistical methods

    Science.gov (United States)

    Mann, Michael E.; Steinman, Byron A.; Miller, Sonya K.; Frankcombe, Leela M.; England, Matthew H.; Cheung, Anson H.

    2016-04-01

    The temporary slowdown in large-scale surface warming during the early 2000s has been attributed to both external and internal sources of climate variability. Using semiempirical estimates of the internal low-frequency variability component in Northern Hemisphere, Atlantic, and Pacific surface temperatures in concert with statistical hindcast experiments, we investigate whether the slowdown and its recent recovery were predictable. We conclude that the internal variability of the North Pacific, which played a critical role in the slowdown, does not appear to have been predictable using statistical forecast methods. An additional minor contribution from the North Atlantic, by contrast, appears to exhibit some predictability. While our analyses focus on combining semiempirical estimates of internal climatic variability with statistical hindcast experiments, possible implications for initialized model predictions are also discussed.

  17. A single method for recovery and concentration of enteric viruses and bacteria from fresh-cut vegetables.

    Science.gov (United States)

    Sánchez, G; Elizaquível, P; Aznar, R

    2012-01-03

    Fresh-cut vegetables are prone to be contaminated with foodborne pathogens during growth, harvest, transport and further processing and handling. As most of these products are generally eaten raw or mildly treated, there is an increase in the number of outbreaks caused by viruses and bacteria associated with fresh vegetables. Foodborne pathogens are usually present at very low levels and have to be concentrated (i.e. viruses) or enriched (i.e. bacteria) to enhance their detection. With this aim, a rapid concentration method has been developed for the simultaneous recovery of hepatitis A virus (HAV), norovirus (NV), murine norovirus (MNV) as a surrogate for NV, Escherichia coli O157:H7, Listeria monocytogenes and Salmonella enterica. Initial experiments focused on evaluating the elution conditions suitable for virus release from vegetables. Finally, elution with buffered peptone water (BPW), using a Pulsifier, and concentration by polyethylene glycol (PEG) precipitation were the methods selected for the elution and concentration of both, enteric viruses and bacteria, from three different types of fresh-cut vegetables by quantitative PCR (qPCR) using specific primers. The average recoveries from inoculated parsley, spinach and salad, were ca. 9.2%, 43.5%, and 20.7% for NV, MNV, and HAV, respectively. Detection limits were 132 RT-PCR units (PCRU), 1.5 50% tissue culture infectious dose (TCID₅₀), and 6.6 TCID₅₀ for NV, MNV, and HAV, respectively. This protocol resulted in average recoveries of 57.4%, 64.5% and 64.6% in three vegetables for E. coli O157:H7, L. monocytogenes and Salmonella with corresponding detection limits of 10³, 10² and 10³ CFU/g, respectively. Based on these results, it can be concluded that the procedure herein is suitable to recover, detect and quantify enteric viruses and foodborne pathogenic bacteria within 5 h and can be applied for the simultaneous detection of both types of foodborne pathogens in fresh-cut vegetables. Copyright

  18. Comparison of Listeria monocytogenes recoveries from spiked mung bean sprouts by the enrichment methods of three regulatory agencies.

    Science.gov (United States)

    Cauchon, Kaitlin E; Hitchins, Anthony D; Smiley, R Derike

    2017-09-01

    Three selective enrichment methods, the United States Food and Drug Administration's (FDA method), the United States Department of Agriculture Food Safety Inspection Service's (USDA method), and the EN ISO 11290-1 standard method, were assessed for their suitability for recovery of Listeria monocytogenes from spiked mung bean sprouts. Three parameters were evaluated; the enrichment L. monocytogenes population from singly-spiked sprouts, the enrichment L. monocytogenes population from doubly-spiked (L. monocytogenes and Listeria innocua) sprouts, and the population differential resulting from the enrichment of doubly-spiked sprouts. Considerable L. monocytogenes inter-strain variation was observed. The mean enrichment L. monocytogenes populations for singly-spiked sprouts were 6.1 ± 1.2, 4.9 ± 1.2, and 6.9 ± 2.3 log CFU/mL for the FDA, USDA, and EN ISO 11290-1 methods, respectively. The mean L. monocytogenes populations for doubly-spiked sprouts were 4.7 ± 1.1, 5.5 ± 1.3, and 4.6 ± 1.4 log CFU/mL for the FDA, USDA, and ISO 11290-1 enrichment methods, respectively. The corresponding mean population differentials were 2.8 ± 1.1, 3.3 ± 1.3, and 3.6 ± 1.4 Δlog CFU/mL for the same three enrichment methods, respectively. The presence of L. innocua and resident microorganisms on the sprouts negatively impacted final levels of L. monocytogenes with all three enrichment methods. Published by Elsevier Ltd.

  19. Evaluation of the thin agar layer method for the recovery of pressure-injured and heat-injured Listeria monocytogenes.

    Science.gov (United States)

    Lavieri, Nicolas A; Sebranek, Joseph G; Cordray, Joseph C; Dickson, James S; Jung, Stephanie; Manu, David K; Mendonça, Aubrey F; Brehm-Stecher, Byron F; Stock, Joseph; Stalder, Kenneth J

    2014-05-01

    A sublethally injured bacterial cell has been defined as a cell that survives a stress such as heating, freezing, acid treatment, or other antimicrobial intervention but can repair the cellular damage exerted by the stressor and later regain its original ability to grow. Consequently, sublethally injured cells are not likely to be included in conventional enumeration procedures, which could result in unrealistically low counts unless efforts are made to encourage recovery of the injured cells before enumeration. The objective of this study was to evaluate the use of the thin agar layer (TAL) method for the recovery of pressure-injured and heat-injured Listeria monocytogenes in a tryptic soy broth with 0.6% yeast extract system. Pressure injury consisted of treatment of a culture of mixed L. monocytogenes strains with high hydrostatic pressure at 400 or 600 MPa for 1 s, 2 min, 4 min, or 6 min at a process temperature of 12±2 °C. Heat injury consisted of treatment of a culture of mixed L. monocytogenes strains at 60±1 °C for 3, 6, or 9 min. Growth media were tryptic soy agar (TSA) with 0.6% yeast extract, modified Oxford medium (MOX), and TAL, which consisted of a 7-ml layer of TSA overlaid onto solidified MOX. Counts of viable L. monocytogenes on TAL were higher than those on MOX in the heat-injury experiment but not in the pressure-injury experiment. Therefore, the effectiveness of the TAL method may be specific to the type of injury applied to the microorganism and should be investigated in a variety of cellular injury scenarios.

  20. Evaluation of methods to improve the extraction and recovery of DNA from cotton swabs for forensic analysis.

    Science.gov (United States)

    Adamowicz, Michael S; Stasulli, Dominique M; Sobestanovich, Emily M; Bille, Todd W

    2014-01-01

    Samples for forensic DNA analysis are often collected from a wide variety of objects using cotton or nylon tipped swabs. Testing has shown that significant quantities of DNA are retained on the swab, however, and subsequently lost. When processing evidentiary samples, the recovery of the maximum amount of available DNA is critical, potentially dictating whether a usable profile can be derived from a piece of evidence or not. The QIAamp DNA Investigator extraction kit was used with its recommended protocol for swabs (one hour incubation at 56°C) as a baseline. Results indicate that over 50% of the recoverable DNA may be retained on the cotton swab tip, or otherwise lost, for both blood and buccal cell samples when using this protocol. The protocol's incubation time and temperature were altered, as was incubating while shaking or stationary to test for increases in recovery efficiency. An additional step was then tested that included periodic re-suspension of the swab tip in the extraction buffer during incubation. Aliquots of liquid blood or a buccal cell suspension were deposited and dried on cotton swabs and compared with swab-less controls. The concentration of DNA in each extract was quantified and STR analysis was performed to assess the quality of the extracted DNA. Stationary incubations and those performed at 65°C did not result in significant gains in DNA yield. Samples incubated for 24 hours yielded less DNA. Increased yields were observed with three and 18 hour incubation periods. Increases in DNA yields were also observed using a swab re-suspension method for both cell types. The swab re-suspension method yielded an average two-fold increase in recovered DNA yield with buccal cells and an average three-fold increase with blood cells. These findings demonstrate that more of the DNA collected on swabs can be recovered with specific protocol alterations.

  1. Evaluation of methods to improve the extraction and recovery of DNA from cotton swabs for forensic analysis.

    Directory of Open Access Journals (Sweden)

    Michael S Adamowicz

    Full Text Available Samples for forensic DNA analysis are often collected from a wide variety of objects using cotton or nylon tipped swabs. Testing has shown that significant quantities of DNA are retained on the swab, however, and subsequently lost. When processing evidentiary samples, the recovery of the maximum amount of available DNA is critical, potentially dictating whether a usable profile can be derived from a piece of evidence or not. The QIAamp DNA Investigator extraction kit was used with its recommended protocol for swabs (one hour incubation at 56°C as a baseline. Results indicate that over 50% of the recoverable DNA may be retained on the cotton swab tip, or otherwise lost, for both blood and buccal cell samples when using this protocol. The protocol's incubation time and temperature were altered, as was incubating while shaking or stationary to test for increases in recovery efficiency. An additional step was then tested that included periodic re-suspension of the swab tip in the extraction buffer during incubation. Aliquots of liquid blood or a buccal cell suspension were deposited and dried on cotton swabs and compared with swab-less controls. The concentration of DNA in each extract was quantified and STR analysis was performed to assess the quality of the extracted DNA. Stationary incubations and those performed at 65°C did not result in significant gains in DNA yield. Samples incubated for 24 hours yielded less DNA. Increased yields were observed with three and 18 hour incubation periods. Increases in DNA yields were also observed using a swab re-suspension method for both cell types. The swab re-suspension method yielded an average two-fold increase in recovered DNA yield with buccal cells and an average three-fold increase with blood cells. These findings demonstrate that more of the DNA collected on swabs can be recovered with specific protocol alterations.

  2. Increased recovery of touch DNA evidence using FTA paper compared to conventional collection methods.

    Science.gov (United States)

    Kirgiz, Irina A; Calloway, Cassandra

    2017-04-01

    Tape lifting and FTA paper scraping methods were directly compared to traditional double swabbing for collecting touch DNA from car steering wheels (n = 70 cars). Touch DNA was collected from the left or right side of each steering wheel (randomized) using two sterile cotton swabs, while the other side was sampled using water-soluble tape or FTA paper cards. DNA was extracted and quantified in duplicate using qPCR. Quantifiable amounts of DNA were detected for 100% of the samples (n = 140) collected independent of the method. However, the DNA collection yield was dependent on the collection method. A statistically significant difference in DNA yield was observed between FTA scraping and double swabbing methods (p = 0.0051), with FTA paper collecting a two-fold higher amount. Statistical analysis showed no significant difference in DNA yields between the double swabbing and tape lifting techniques (p = 0.21). Based on the DNA concentration required for 1 ng input, 47% of the samples collected using FTA paper would be expected to yield a short tandem repeat (STR) profile compared to 30% and 23% using double swabbing or tape, respectively. Further, 55% and 77% of the samples collected using double swabbing or tape, respectively, did not yield a high enough DNA concentration for the 0.5 ng of DNA input recommended for conventional STR kits and would be expected to result in a partial or no profile compared to 35% of the samples collected using FTA paper. STR analysis was conducted for a subset of the higher concentrated samples to confirm that the DNA collected from the steering wheel was from the driver. 32 samples were selected with DNA amounts of at least 1 ng total DNA (100 pg/μl when concentrated if required). A mixed STR profile was observed for 26 samples (88%) and the last driver was the major DNA contributor for 29 samples (94%). For one sample, the last driver was the minor DNA contributor. A full STR profile of the last driver was observed for

  3. An Insight Into Budgeting, The Funding And Cost Recovery of ...

    African Journals Online (AJOL)

    The study further revealed that Institutions' financial support for students was woefully inadequate. Students' fee payment was also identified as the main modality for cost recovery of tertiary education. It was recommended that communities and industries should be made to make meaningful contributions towards tertiary ...

  4. Cerebral Ischemia versus MS in Young Adults Clinical Imaging Diagnosis Difficulties and Recovery Methods

    OpenAIRE

    Any DOCU-AXELERAD; Dan DOCU-AXELERAD

    2012-01-01

    Ischemia in young adults is often the result of non-atherosclerotic vasculopathies, cardiac embolism or clotting disorders. One third of young adults ischemic stroke etiology remains undetermined. Materials and methods: We present the case of a patient aged 42, diagnosed with probable MS without cardiovascular or metabolic risk factors, presented to our clinic for decrease of force at right limbs and recent dysarthria. Results and discussion: The history revealed recurrent episodes of right h...

  5. Novel Approaches to Extraction Methods in Recovery of Capsaicin from Habanero Pepper (CNPH 15.192).

    Science.gov (United States)

    Martins, Frederico S; Borges, Leonardo L; Ribeiro, Claudia S C; Reifschneider, Francisco J B; Conceição, Edemilson C

    2017-07-01

    The objective of this study was to compare three capsaicin extraction methods: Shoxlet, Ultrasound-assisted Extraction (UAE), and Shaker-assisted Extraction (SAE) from Habanero pepper, CNPH 15.192. The different parameters evaluated were alcohol degree, time extraction, and solid-solvent ratio using response surface methodology (RSM). The three parameters found significant ( p Soxhlet increased the extraction in 10-25%; however, long extraction times (45 minutes) degraded 2% capsaicin. The extraction of capsaicin was influenced by extraction method and by the operating conditions chosen. The optimized conditions provided savings of time, solvent, and herbal material. Prudent choice of the extraction method is essential to ensure optimal yield of extract, thereby making the study relevant and the knowledge gained useful for further exploitation and application of this resource. Habanero pepper , line CNPH 15.192, possess capsaicin in higher levels when compared with others speciesHigher levels of ethanolic strength are more suitable to obtain a higher levels of capsaicinBox-Behnken design indicates to be useful to explore the best conditions of ultrasound assisted extraction of capsaicin. Abbreviations used: Nomenclature UAE: Ultrasound-assisted Extraction; SAE: Shaker-assisted Extraction.

  6. Pulsed Dilution Method for the Recovery of Aggregated Mouse TNF-α

    Directory of Open Access Journals (Sweden)

    Merat Mahmoodi

    2017-05-01

    Full Text Available Background: The expression of mouse tumor necrosis factor alpha (TNF-α in Escherichia coli is a favorable way to get high yield of protein; however, the formation of cytoplasmic inclusion bodies, which is the consequence of insoluble accumulated proteins, is a major obstacle in this system. To overcome this obstacle, we used a pulsed dilution method to convert the product to its native conformation. Methods: Reducing agent and guanidine hydrochloride were used to solubilize inclusion bodies formed after TNF-(α expression. Then, the refolding procedure was performed by pulsed dilution of the denatured protein into a refolding buffer. The properly-folded protein was purified by metal affinity chromatography. Results: SDS-PAGE showed a 19.9 kDa band related to the mature TNF-(α protein. The protein was recognized by anti-mouse TNF-(α on western blots. The final concentration of the purified recombinant TNF-(α was 62.5 μg/mL. Conclusions: Our study demonstrates the efficiency of this method to produce a high yield of folded mature TNF- (α.

  7. The enhancement of dismissed military barracks, a method for brownfield recovery

    Directory of Open Access Journals (Sweden)

    Paola Pellegrini

    2012-04-01

    Full Text Available The enhancement of dismissed military barracks is a big problem in Friuli Venezia Giulia region. The changed geo-politic conditions caused the abandonment of the numerous structures and the transfer of their property from State to Region and then to local municipalities. The regional government has not defined guidelines for their re-use and the work for the Patussi barracks, done to produce a re-use program, became a case study to explore possible strategies of intervention and the right method to adopt in order to give technical support to local governments. The paper describes the analysis, the scenarios, the proposal produced for the case-study.

  8. Ptychographic overlap constraint errors and the limits of their numerical recovery using conjugate gradient descent methods.

    Science.gov (United States)

    Tripathi, Ashish; McNulty, Ian; Shpyrko, Oleg G

    2014-01-27

    Ptychographic coherent x-ray diffractive imaging is a form of scanning microscopy that does not require optics to image a sample. A series of scanned coherent diffraction patterns recorded from multiple overlapping illuminated regions on the sample are inverted numerically to retrieve its image. The technique recovers the phase lost by detecting the diffraction patterns by using experimentally known constraints, in this case the measured diffraction intensities and the assumed scan positions on the sample. The spatial resolution of the recovered image of the sample is limited by the angular extent over which the diffraction patterns are recorded and how well these constraints are known. Here, we explore how reconstruction quality degrades with uncertainties in the scan positions. We show experimentally that large errors in the assumed scan positions on the sample can be numerically determined and corrected using conjugate gradient descent methods. We also explore in simulations the limits, based on the signal to noise of the diffraction patterns and amount of overlap between adjacent scan positions, of just how large these errors can be and still be rendered tractable by this method.

  9. Recovery of indium from used LCD panel by a time efficient and environmentally sound method assisted HEBM

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Cheol-Hee; Jeong, Mi-Kyung [Division of Advanced Materials Engineering and Institute for Rare Metals, Kongju National University, Cheonan 331-717 (Korea, Republic of); Fatih Kilicaslan, M. [Department of Physics, Faculty of Art and Science, Kastamonu University, Kastamonu (Turkey); Lee, Jong-Hyeon [Graduate School of Green Energy Technology and Department of Nanomaterials Engineering, Chungnam National University, 79 Daehak-ro, Yuseong-gu, Dajeon 305-764 (Korea, Republic of); Hong, Hyun-Seon [Advanced Materials and Processing Center, Institute for Advanced Engineering (IAE), Yongin 449-863 (Korea, Republic of); Hong, Soon-Jik, E-mail: hongsj@kongju.ac.kr [Division of Advanced Materials Engineering and Institute for Rare Metals, Kongju National University, Cheonan 331-717 (Korea, Republic of)

    2013-03-15

    Highlights: ► In this study, we recovered indium from a waste LCD panel. ► The ITO glass was milled to obtain micron size particles in a HEBM machine. ► Effect of particle size of ITO glass on the amount of dissolved In was investigated. ► In a very short time, a considerable amount of In was recovered. ► Amount of HCl in acid solution was decreased to 40 vol.%. - Abstract: In this study, a method which is environmentally sound, time and energy efficient has been used for recovery of indium from used liquid crystal display (LCD) panels. In this method, indium tin oxide (ITO) glass was crushed to micron size particles in seconds via high energy ball milling (HEBM). The parameters affecting the amount of dissolved indium such as milling time, particle size, effect time of acid solution, amount of HCl in the acid solution were tried to be optimized. The results show that by crushing ITO glass to micron size particles by HEBM, it is possible to extract higher amount of indium at room temperature than that by conventional methods using only conventional shredding machines. In this study, 86% of indium which exists in raw materials was recovered about in a very short time.

  10. A method of neptunium recovery into the product stream of the Purex 1st codecontamination step for LWR fuel reprocessing

    International Nuclear Information System (INIS)

    Tsuboya, Takao; Nemoto, Shinichi; Hoshino, Tadaya; Segawa, Takeshi

    1973-01-01

    An improved nitrous acid method was applied for recovering neptunium in spent fuel. Counter-current solvent extraction has been performed to find out its recovery conditions. The nitrous acid in the form of sodium salt solution was fed to the 1st stage of extraction section, and hydrazine nitrate was fed to some stages near feed point. Flow rate and the concentration of additives were altered for finding out optimum condition. Laboratory scale mixer-settlers having 6 ml of mixing volume and 17 ml of settling volume for each stage were used. The nitrous acid method was improved so that the reduction reaction in scrub section can be eliminated by the decomposition of the nitrous acid using a reagent such as sulfamic acid, urea, or hydrazine. In operation, the feed rate of the nitrous acid was about 3 mM/hr, and about 61% of neptunium charged was discharged in the product stream of Purex-1st codecontamination step designed for the LWR fuel reprocessing plant of Power Reactor and Nuclear Fuel Development Corporation. The calculated value of Δx/x for extraction section agreed with the experimental value, where Δx is the quantity of oxidation, and x is the inventory for neptunium in each stage. In conclusion, the improved nitrous acid method is effective for the neptunium discharge in product stream, and the difference of neptunium extraction between estimate and experiment is caused by some of reduction reaction in scrub section. (Iwakiri, K.)

  11. Catalogue of methods, tools and techniques for recovery from fuel damage events

    International Nuclear Information System (INIS)

    1991-10-01

    On the basis of the recommendations of the Advisory Group Meeting on Main Principles of Safe Management of Severely Damaged Nuclear Fuel and other Accident Generated Waste, held from 13 to 16 November 1989, the IAEA initiated a programme in 1990 to collect technical information on special tools and methods to deal with circumstances beyond the normal design basis of fuel damage. A Questionnaire was sent out to solicit information from the Member States and organizations which might have experience in this field. The responses to the Questionnaire were discussed at a Consultants Meeting and at an Advisory Group Meeting during 1990. The aim of this document is to disseminate the experience gained in Member States serving Article 5 of the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency and also filling a potential void in response to fuel damage events of less severe magnitude

  12. Retention of data in heat-damaged SIM cards and potential recovery methods.

    Science.gov (United States)

    Jones, B J; Kenyon, A J

    2008-05-02

    Examination of various SIM cards and smart card devices indicates that data may be retained in SIM card memory structures even after heating to temperatures up to 450 degrees C, which the National Institute of Standards and Technology (NIST) has determined to be approximately the maximum average sustained temperature at desk height in a house fire. However, in many cases, and certainly for temperatures greater than 450 degrees C, the SIM card chip has suffered structural or mechanical damage that renders simple probing or rewiring ineffective. Nevertheless, this has not necessarily affected the data, which is stored as charge in floating gates, and alternative methods for directly accessing the stored charge may be applicable.

  13. Measuring Post-transfusion Recovery and Survival of Red Blood Cells: Strengths and Weaknesses of Chromium-51 Labeling and Alternative Methods

    Directory of Open Access Journals (Sweden)

    Camille Roussel

    2018-05-01

    Full Text Available The proportion of transfused red blood cells (RBCs that remain in circulation is an important surrogate marker of transfusion efficacy and contributes to predict the potential benefit of a transfusion process. Over the last 50 years, most of the transfusion recovery data were generated by chromium-51 (51Cr-labeling studies and were predominantly performed to validate new storage systems and new processes to prepare RBC concentrates. As a consequence, our understanding of transfusion efficacy is strongly dependent on the strengths and weaknesses of 51Cr labeling in particular. Other methods such as antigen mismatch or biotin-based labeling can bring relevant information, for example, on the long-term survival of transfused RBC. These radioactivity-free methods can be used in patients including from vulnerable groups. We provide an overview of the methods used to measure transfusion recovery in humans, compare their strengths and weaknesses, and discuss their potential limitations. Also, based on our understanding of the spleen-specific filtration of damaged RBC and historical transfusion recovery data, we propose that RBC deformability and morphology are storage lesion markers that could become useful predictors of transfusion recovery. Transfusion recovery can and should be accurately explored by more than one method. Technical optimization and clarification of concepts is still needed in this important field of transfusion and physiology.

  14. Yb(OTf){sub 3}-catalyzed one-pot three component synthesis for tertiary amines

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Bum Seok; Kim, Ji Hye; Nam, Tae Kyu; Jang, Doo Ok [Dept. of Chemistry, Yonsei University, Wonju (Korea, Republic of)

    2015-07-15

    Tertiary amine functionality is found in many natural bioactive products such as alkaloids, amino acids, nucleic acids, pharmaceuticals, and agrochemicals. Tertiary amines have also been used as building blocks for nitrogen-containing organic compounds and synthetic polymers. A one-pot method for direct reductive amination of aldehydes has been developed to synthesize tertiary amines using HMDS as a nitrogen source in the presence of Yb(OTf ){sub 3}. With a stoichiometric amount of HMDS, the reaction afforded the desired tertiary amines without competitive reduction of the parent carbonyl compounds. This reaction offers a convenient and efficient protocol for synthesizing aromatic and aliphatic tertiary amines under mild reaction conditions.

  15. Application of microbiological methods for secondary oil recovery from the Carpathian crude oil reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Karaskiewicz, J

    1974-01-01

    The investigation made it possible to isolate from different ecologic environmental (soil, crude oil, formation water, industrial wastes) bacteria cultures of the genus Arthrobacter, Clostridium, Mycobacterium, Peptococcus, and Pseudomonas. These heterotrophic bacteria are characterized by a high metabolic and biogeochemical activity hydrocarbon transformation. Experiments on a technical scale were conducted from 1961 to 1971 in 20 wells; in this study, only the 16 most typical examples are discussed. The experiments were conducted in Carpathian crude oil reservoirs. To each well, a 500:1 mixture of the so-called bacteria vaccine (containing an active biomass of cultures obtained by a specific cultivation method and holding 6 x 10/sup 5/ bacteria cells in 1 ml of fluid, 2,000 kg of molasses, and 50 cu m of water originating from the reservoir submitted to treatment) was injected at 500 to 1,200 m. The intensification of the microbiological processes in the reservoir was observed. This phenomenon occurred not only in the wells to which the bacteria vaccine was injected, but also in the surrounding producing wells. At the same time, an increase in the crude oil production occurred on the average within the range from 20 to 200% and the surpluses of crude oil production continued for 2 to 8 yr. (92 refs.)

  16. Cerebral Ischemia versus MS in Young Adults Clinical Imaging Diagnosis Difficulties and Recovery Methods

    Directory of Open Access Journals (Sweden)

    Any DOCU-AXELERAD

    2012-12-01

    Full Text Available Ischemia in young adults is often the result of non-atherosclerotic vasculopathies, cardiac embolism or clotting disorders. One third of young adults ischemic stroke etiology remains undetermined. Materials and methods: We present the case of a patient aged 42, diagnosed with probable MS without cardiovascular or metabolic risk factors, presented to our clinic for decrease of force at right limbs and recent dysarthria. Results and discussion: The history revealed recurrent episodes of right hemi-body numbness and vertigo labeled as relapse in MS. Patient is non smoker, does not take oral contraceptives and has no history of cerebrovascular disease in the family. Extensive imaging and laboratory investigations confirms the ischemic clinical picture, carotid Doppler ultrasound showing significant stenosis of the bulbo-left carotid. The patient is guided to the cardiovascular surgery clinic for specialized treatment. Two weeks postoperatively we apply a kinetic-therapy program. Conclusion: Uncertain imaging and lack of vascular and metabolic risk factors do not preclude ischemia in young adults.

  17. Pretreatment and hydrolysis methods for recovery of fermentable sugars from de-oiled Jatropha waste.

    Science.gov (United States)

    Kumar, Gopalakrishnan; Sen, Biswarup; Lin, Chiu-Yue

    2013-10-01

    The release of reducing sugars (RS) upon various pretreatments and hydrolysis methods from de-oiled Jatropha waste (DJW) was studied. The highest RS concentration of 12.9 g/L was observed at 10% enzyme hydrolysis. The next highest RS of 8.0 g/L and 7.8 g/L were obtained with 10% HCl and 2.5% H2SO4, respectively. The NaOH (2.5%), ultrasonication and heat (90°C for 60 min) treatments showed the RS concentration of 2.5 g/L, 1.1 g/L and 2.0 g/L, respectively. Autoclave treatment slightly enhanced the sugar release (0.9 g/L) compared to no treatment (0.7 g/L). Glucose release (11.4 g/L) peaked in enzyme hydrolysis. Enzyme treated acid unhydrolysed biomass showed 11.1 g/L RS. HCl and H2SO4 pretreatment gave maximal xylose (6.89 g/L and 6.16 g/L, respectively). Combined (acid and enzyme) hydrolysis employed was efficient and its subsequent batch hydrogen fermentation showed a production 3.1 L H2/L reactor. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Tertiary lymphoid organs in Takayasu Arteritis

    OpenAIRE

    Marc eClement; Marc eClement; Adrien eGaly; Patrick eBruneval; Marion eMorvan; Fabien eHyafil; Fabien eHyafil; Khadija eBenali; Nicoletta ePasi; Lydia eDeschamps; Quentin ePellenc; Quentin ePellenc; Thomas ePapo; Antonino eNicoletti; Antonino eNicoletti

    2016-01-01

    Objective: The role of B cells in the pathogenesis of Takayasu arteritis (TA) is controversial. We aimed to study the presence of tertiary lymphoid organs (TLOs) in the aortic wall of TA patients.Methods: Hematoxylin and eosin–stained sections from aorta specimens from patients with TA were screened for TLOs. The presence of B cell aggregates (CD20), follicular dendritic cells (FDCs, CD21), and high endothelial venules (HEVs, PNAd) was investigated by immunohistochemistry. Immune cells from t...

  19. Tertiary Lymphoid Organs in Takayasu Arteritis

    OpenAIRE

    Clement, Marc; Galy, Adrien; Bruneval, Patrick; Morvan, Marion; Hyafil, Fabien; Benali, Khadija; Pasi, Nicoletta; Deschamps, Lydia; Pellenc, Quentin; Papo, Thomas; Nicoletti, Antonino; Sacre, Karim

    2016-01-01

    Objective The role of B cells in the pathogenesis of Takayasu arteritis (TA) is controversial. We aimed to study the presence of tertiary lymphoid organs (TLOs) in the aortic wall of TA patients. Methods Hematoxylin and eosin-stained sections from aorta specimens from patients with TA were screened for TLOs. The presence of B cell aggregates (CD20), follicular dendritic cells (FDCs, CD21), and high endothelial venules (HEVs, PNAd) was investigated by immunohistochemistry. Immune ce...

  20. Key Determinant Derivations for Information Technology Disaster Recovery Site Selection by the Multi-Criterion Decision Making Method

    Directory of Open Access Journals (Sweden)

    Chia-Lee Yang

    2015-05-01

    Full Text Available Disaster recovery sites are an important mechanism in continuous IT system operations. Such mechanisms can sustain IT availability and reduce business losses during natural or human-made disasters. Concerning the cost and risk aspects, the IT disaster-recovery site selection problems are multi-criterion decision making (MCDM problems in nature. For such problems, the decision aspects include the availability of the service, recovery time requirements, service performance, and more. The importance and complexities of IT disaster recovery sites increases with advances in IT and the categories of possible disasters. The modern IT disaster recovery site selection process requires further investigation. However, very few researchers tried to study related issues during past years based on the authors’ extremely limited knowledge. Thus, this paper aims to derive the aspects and criteria for evaluating and selecting a modern IT disaster recovery site. A hybrid MCDM framework consisting of the Decision Making Trial and Evaluation Laboratory (DEMATEL and the Analytic Network Process (ANP will be proposed to construct the complex influence relations between aspects as well as criteria and further, derive weight associated with each aspect and criteria. The criteria with higher weight can be used for evaluating and selecting the most suitable IT disaster recovery sites. In the future, the proposed analytic framework can be used for evaluating and selecting a disaster recovery site for data centers by public institutes or private firms.

  1. Optimisation of decontamination method and influence of culture media on the recovery of Mycobacterium avium subspecies paratuberculosis from spiked water sediments.

    Science.gov (United States)

    Aboagye, G; Rowe, M T

    2018-07-01

    The recovery of Mycobacterium avium subspecies paratuberculosis (Map) from the environment can be a laborious process - owing to Map being fastidious, its low number, and also high numbers of other microbial populations in such settings. Protocols i.e. filtration, decontamination and modified elution were devised to recover Map from spiked water sediments. Three culture media: Herrold's Egg Yolk Media (HEYM), Middlebrook 7H10 (M-7H10) and Bactec 12B were then employed to grow the organism following its elution. In the sterile sediment samples the recovery of Map was significant between the time of exposure for each of HEYM and M-7H10, and insignificant between both media (P < 0.05). However, in the non-sterile sediment samples, the HEYM grew other background microflora including moulds at all the times of exposure whilst 4 h followed by M-7H10 culture yielded Map colonies without any background microflora. Using sterile samples only for the Bactec 12B, the recovery of Map decreased as time of exposure increased. Based on these findings, M-7H10 should be considered for the recovery of Map from the natural environment including water sediments where the recovery of diverse microbial species remains a challenge. Map is a robust pathogen that abides in the environment. In water treatment operations, Map associates with floccules and other particulate matter including sediments. It is also a fastidious organism, and its detection and recovery from the water environment is a laborious process and can be misleading within the abundance of other mycobacterial species owing to their close resemblance in phylogenetic traits. In the absence of a reliable recovery method, Map continues to pose public health risks through biofilm in household water tanks, hence the need for the development of a reliable recovery protocol to monitor the presence of Map in water systems in order to curtail its public health risks. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Interactive Intranet Portal for effective Management in Tertiary Institution

    OpenAIRE

    Idogho O. Philipa; Akpado Kenneth; James Agajo

    2011-01-01

    Interactive Intranet Portal for effective management in Tertiary Institution is an enhanced and interactive method of managing and processing key issues in Tertiary Institution, Problems of result processing, tuition fee payment, library resources management are analyzed in this work. An interface was generated to handle this problem; the software is an interactive one. Several modules are involved in the paper, like: LIBRARY CONSOLE, ADMIN, STAFF, COURSE REGISTRATION, CHECKING OF RESULTS and...

  3. Stereoinversion of tertiary alcohols to tertiary-alkyl isonitriles and amines.

    Science.gov (United States)

    Pronin, Sergey V; Reiher, Christopher A; Shenvi, Ryan A

    2013-09-12

    The SN2 reaction (bimolecular nucleophilic substitution) is a well-known chemical transformation that can be used to join two smaller molecules together into a larger molecule or to exchange one functional group for another. The SN2 reaction proceeds in a very predictable manner: substitution occurs with inversion of stereochemistry, resulting from the 'backside attack' of the electrophilic carbon by the nucleophile. A significant limitation of the SN2 reaction is its intolerance for tertiary carbon atoms: whereas primary and secondary alcohols are viable precursor substrates, tertiary alcohols and their derivatives usually either fail to react or produce stereochemical mixtures of products. Here we report the stereochemical inversion of chiral tertiary alcohols with a nitrogenous nucleophile facilitated by a Lewis-acid-catalysed solvolysis. The method is chemoselective against secondary and primary alcohols, thereby complementing the selectivity of the SN2 reaction. Furthermore, this method for carbon-nitrogen bond formation mimics a putative biosynthetic step in the synthesis of marine terpenoids and enables their preparation from the corresponding terrestrial terpenes. We expect that the general attributes of the methodology will allow chiral tertiary alcohols to be considered viable substrates for stereoinversion reactions.

  4. Development of infill drilling recovery models for carbonates reservoirs using neural networks and multivariate statistical as a novel method

    International Nuclear Information System (INIS)

    Soto, R; Wu, Ch. H; Bubela, A M

    1999-01-01

    This work introduces a novel methodology to improve reservoir characterization models. In this methodology we integrated multivariate statistical analyses, and neural network models for forecasting the infill drilling ultimate oil recovery from reservoirs in San Andres and Clearfork carbonate formations in west Texas. Development of the oil recovery forecast models help us to understand the relative importance of dominant reservoir characteristics and operational variables, reproduce recoveries for units included in the database, forecast recoveries for possible new units in similar geological setting, and make operational (infill drilling) decisions. The variety of applications demands the creation of multiple recovery forecast models. We have developed intelligent software (Soto, 1998), oilfield intelligence (01), as an engineering tool to improve the characterization of oil and gas reservoirs. 01 integrates neural networks and multivariate statistical analysis. It is composed of five main subsystems: data input, preprocessing, architecture design, graphic design, and inference engine modules. One of the challenges in this research was to identify the dominant and the optimum number of independent variables. The variables include porosity, permeability, water saturation, depth, area, net thickness, gross thickness, formation volume factor, pressure, viscosity, API gravity, number of wells in initial water flooding, number of wells for primary recovery, number of infill wells over the initial water flooding, PRUR, IWUR, and IDUR. Multivariate principal component analysis is used to identify the dominant and the optimum number of independent variables. We compared the results from neural network models with the non-parametric approach. The advantage of the non-parametric regression is that it is easy to use. The disadvantage is that it retains a large variance of forecast results for a particular data set. We also used neural network concepts to develop recovery

  5. Promoting recovery-oriented practice in mental health services: a quasi-experimental mixed-methods study.

    Science.gov (United States)

    Gilburt, Helen; Slade, Mike; Bird, Victoria; Oduola, Sheri; Craig, Tom K J

    2013-06-13

    Recovery has become an increasingly prominent concept in mental health policy internationally. However, there is a lack of guidance regarding organisational transformation towards a recovery orientation. This study evaluated the implementation of recovery-orientated practice through training across a system of mental health services. The intervention comprised four full-day workshops and an in-team half-day session on supporting recovery. It was offered to 383 staff in 22 multidisciplinary community and rehabilitation teams providing mental health services across two contiguous regions. A quasi-experimental design was used for evaluation, comparing behavioural intent with staff from a third contiguous region. Behavioural intent was rated by coding points of action on the care plans of a random sample of 700 patients (400 intervention, 300 control), before and three months after the intervention. Action points were coded for (a) focus of action, using predetermined categories of care; and (b) responsibility for action. Qualitative inquiry was used to explore staff understanding of recovery, implementation in services and the wider system, and the perceived impact of the intervention. Semi-structured interviews were conducted with 16 intervention group team leaders post-training and an inductive thematic analysis undertaken. A total of 342 (89%) staff received the intervention. Care plans of patients in the intervention group had significantly more changes with evidence of change in the content of patient's care plans (OR 10.94. 95% CI 7.01-17.07) and the attributed responsibility for the actions detailed (OR 2.95, 95% CI 1.68-5.18). Nine themes emerged from the qualitative analysis split into two superordinate categories. 'Recovery, individual and practice', describes the perception and provision of recovery orientated care by individuals and at a team level. It includes themes on care provision, the role of hope, language of recovery, ownership and

  6. A review on methods of recovery of acid(s) from spent pickle liquor of steel industry.

    Science.gov (United States)

    Ghare, N Y; Wani, K S; Patil, V S

    2013-04-01

    Pickling is the process of removal of oxide layer and rust formed on metal surface. It also removes sand and corrosion products from the surface of metal. Acids such as sulfuric acid, hydrochloric acid are used for pickling. Hydrofluoric acid-Nitric acid mixture is used for stainless steel pickling. Pickling solutions are spent when acid concentration in pickling solutions decreases by 75-85%, which also has metal content up to 150-250 g/ dm3. Spent pickling liquor (SPL) should be dumped because the efficiency of pickling decreases with increasing content of dissolved metal in the bath. The SPL content depends on the plant of origin and the pickling method applied there. SPL from steel pickling in hot-dip galvanizing plants contains zinc(II), iron, traces of lead, chromium. and other heavy metals (max. 500 mg/dm3) and hydrochloric acid. Zinc(II) passes tothe spent solution after dissolution of this metal from zinc(II)-covered racks, chains and baskets used for transportation of galvanized elements. Unevenly covered zinc layers are usually removed in another pickling bath. Due to this, zinc(II) concentration increases even up to 110 g/dm3, while iron content may reach or exceed even 80 g/dm3 in the same solution. This review presents an overview on different aspects of generation and treatment of SPL with recourse to recovery of acid for recycling. Different processes are described in this review and higher weightage is given to membrane processes.

  7. Method of obtaining enhanced oil recovery by the use of microorganisms; Fremgangsmaate for aa oppnaa forbedret oljeutvinning under anvendelse av mikroorganismer

    Energy Technology Data Exchange (ETDEWEB)

    Silver, R.S.; Moon, W.G.; Bunting, P.M.; Acheson, W.P.

    1995-03-27

    The invention deals with an method for improving the recovery from petroleum reservoirs by the use of microorganisms. According to the invention, there is to be injected a suspension of a biological clean breed of the Bacillus licheniformis or spores thereof in order to tighten selectively the relative strong penetrating zones of a reservoir. 2 figs.

  8. Method for the recovery of uranium from phosphoric acid, originating from the wet-process of uraniferous phosphate ores

    International Nuclear Information System (INIS)

    Pyrih, R.Z.; Rickard, R.S.; Carrington, O.F.

    1978-01-01

    Improvement in the process for recoverying uranium from wet-process phosphoric acid solution derived from the acidulation of uraniferous phosphate ores by the use of two ion exchange circuits is described. (Auth.)

  9. Response of Cotton to Irrigation Methods and Nitrogen Fertilization: Yield Components, Water-Use Efficiency, Nitrogen Uptake, and Recovery

    International Nuclear Information System (INIS)

    Janat, M.

    2009-01-01

    Efficient crop use of nitrogen (N) fertilizer is critical from economic and environmental viewpoints, especially under irrigated conditions. Cotton yield parameters, fiber quality, water- and N-use efficiency responses to N, and irrigation methods in northern Syria were evaluated. Field trials were conducted for two growing seasons on a Chromoxerertic Rhodoxeralf soil. Treatments consisted of drip fertigation, furrow irrigation, and five different rates of N fertilizer (50, 100, 150, 200, and 250 kg N /ha). Cotton was irrigated when soil moisture in the specified active root depth was 80% of the field capacity as indicated by the neutron probe. Seed cotton yield was higher than the national average (3,928 kg/ha) by at least 12% as compared to all treatments. Lint properties were not negatively affected by the irrigation method or N rates. Water savings under drip fertigation ranged between 25 and 50% of irrigation water relative to furrow irrigation. Crop water-use efficiencies of the drip-fertigated treatments were in most cases 100% higher than those of the corresponding furrow-irrigated treatments. The highest water demand was during the fruit-setting growth stage. It was also concluded that under drip fertigation, 100 -150 N kg/ha was adequate and comparable with the highest N rates tested under furrow irrigation regarding lint yield, N uptake, and recovery. Based on cotton seed yield and weight of stems, the overall amount of N removed from the field for the drip-fertigated treatments ranged between 101-118 kg and 116-188 N/ha for 2001 and 2002, respectively. The N removal ranged between 94-113 and 111-144 kg N/ha for the furrow-irrigated treatments for 2001 and 2002, respectively. (author)

  10. Seeking to understand lived experiences of personal recovery in personality disorder in community and forensic settings - a qualitative methods investigation.

    Science.gov (United States)

    Shepherd, Andrew; Sanders, Caroline; Shaw, Jenny

    2017-08-01

    Understandings of personal recovery have emerged as an alternative framework to traditional ideas of clinical progression, or symptom remission, in clinical practice. Most research in this field has focussed on the experience of individuals suffering with psychotic disorders and little research has been conducted to explore the experience of individuals with a personality disorder diagnosis, despite the high prevalence of such difficulties. The nature of the personality disorder diagnosis, together with high prevalence rates in forensic settings, renders the understanding of recovery in these contexts particularly problematic. The current study seeks to map out pertinent themes relating to the recovery process in personality disorder as described by individuals accessing care in either community or forensic settings. Individual qualitative interviews were utilised to explore the lived experience of those receiving a personality disorder diagnosis and accessing mental health care in either community or forensic settings. A thematic analysis was conducted to identify shared concepts and understanding between participants. Fourty-one individual participant interviews were conducted across forensic and community settings. Recovery was presented by participants as a developing negotiated understanding of the self, together with looked for change and hope in the future. Four specific themes emerged in relation to this process: 1. Understanding early lived experience as informing sense of self 2. Developing emotional control 3. Diagnosis as linking understanding and hope for change 4. The role of mental health services. Through considering personal recovery in personality disorder as a negotiated understanding between the individual, their social networks and professionals this study illustrates the complexity of working through such a process. Clarity of understanding in this area is essential to avoid developing resistance in the recovery process. Understanding of

  11. Thermal enhanced oil recovery in Indonesia. Prospect of HTGR application

    International Nuclear Information System (INIS)

    Rahman, M.; Sumardiono; Lasman, A.N.; Sudarto; Prihardany, D.

    1997-01-01

    In the next future, Indonesia will face oil scarcity. The present reserves are estimated to be depleted in 20 years. However, after primary and secondary recovery processes, there are still more than 50% of original oil in place remaining in the reservoir, and this could be recovered by using tertiary recovery method or which is known as enhanced oil recovery (EOR) processes. Among the three major methods of EOR, steam flooding is a thermal recovery method into which High Temperature Reactor (HTR) module can be integrated for producing steam. However, the feasibility of application of HTR as an alternative to conventional oil-fired steam generator will depend strongly on the price of oil. This paper discusses EOR screening for Indonesian oil fields to identify the appropriate oil reservoirs for steam flooding application as well as the possibility of steam supply by HTR module. Also reviewed is the previous study on HTR application for Duri Steam Flood Project. (author). 8 refs, 6 figs, 5 tabs

  12. Chemistry of the direct acid leach, calsinter, and pressure digestion-acid leach methods for the recovery of alumina from fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Kelmers, A.D.; Canon, R.M.; Egan, B.Z.; Felker, L.K.; Gilliam, T.M.; Jones, G.; Owen, G.D.; Seeley, F.G.; Watson, J.S.

    1982-08-01

    The chemistry of three methods for the recovery of alumina from fly ash is reviewed. Fly ashes are characterized with respect to both physical and chemical properties, and differences in ashes derived from eastern and western coals are identified. Aluminum solubilization from fly ashes is explained in terms of the solid phases present, which are related to the basic element content of the ash. The methods used yield high aluminum solubilization from both eastern and western fly ashes. (9 refs.)

  13. Process for uranium recovery in phosphorus compounds

    International Nuclear Information System (INIS)

    Demarthe, J.M.; Solar, Serge.

    1980-01-01

    Process for uranium recovery in phosphorus compounds with an organic phase containing a dialkylphosphoric acid. A solubilizing agent constituted of an heavy alcohol or a phosphoric acid ester or a tertiary phosphine oxide or octanol-2, is added to the organic phase for solubilization of the uranium and ammonium dialkyl pyrophosphate [fr

  14. Intraoperative and recovery room outcome | Edomwonyi | East ...

    African Journals Online (AJOL)

    Objectives: To identify and quantitate anaesthesia related complications in the intraoperative period and in the post anaesthesia recovery room. Design: A prospective study. Setting: University of Benin Teaching Hospital; a University - affiliated tertiary centre. Subjects: Patients scheduled for elective and emergency surgery ...

  15. The outcome of agitation in poisoned patients in an Iranian tertiary care university hospital.

    Science.gov (United States)

    Sabzghabaee, Ali Mohammad; Yaraghi, Ahmad; Khalilidehkordi, Elham; Mirhosseini, Seyyed Mohammad Mahdy; Beheshtian, Elham; Eizadi-Mood, Nastaran

    2014-01-01

    Introduction. This study was conducted to evaluate and document the frequency and causes of agitation, the symptoms accompanying this condition in intoxications, relationship between agitation score on admission and different variables, and the outcome of therapy in a tertiary care referral poisoning center in Iran. Methods. In this prospective observational study which was done in 2012, 3010 patients were screened for agitation at the time of admission using the Richmond Agitation Sedation Scale. Demographic data including age, gender, and the drug ingested were also recorded. The patients' outcome was categorized as recovery without complications, recovery with complications (hyperthermia, renal failure, and other causes), and death. Results. Agitation was observed in 56 patients (males, n = 41), mostly aged 19-40 years (n = 38) and more frequently in illegal substance (stimulants, opioids and also alcohol) abusers. Agitation score was not significantly related to the age, gender, and previous history of psychiatric disorders. Forty nine patients had recovery without any complication. The need for mechanical ventilation was the most frequent complication. None of the patients died. Conclusion. Drug abuse seems to be a must-to-consider etiology for patients presenting with acute agitation and its morbidity and mortality could be low in agitated poisoning cases if prompt supportive care is performed.

  16. Methods for assisting recovery of damaged brain and spinal cord and treating various diseases using arrays of x-ray microplanar beams

    Energy Technology Data Exchange (ETDEWEB)

    Dilmanian, F Avraham [Yaphank, NY; Anchel, David J [Rocky Point, NY; Gaudette, Glenn [Holden, MA; Romanelli, Pantaleo [Monteroduni, IT; Hainfeld, James [Shoreham, NY

    2010-06-29

    A method of assisting recovery of an injury site of the central nervous system (CNS) or treating a disease includes providing a therapeutic dose of X-ray radiation to a target volume through an array of parallel microplanar beams. The dose to treat CNS injury temporarily removes regeneration inhibitors from the irradiated site. Substantially unirradiated cells surviving between beams migrate to the in-beam portion and assist recovery. The dose may be staggered in fractions over sessions using angle-variable intersecting microbeam arrays (AVIMA). Additional doses are administered by varying the orientation of the beams. The method is enhanced by injecting stem cells into the injury site. One array or the AVIMA method is applied to ablate selected cells in a target volume associated with disease for palliative or curative effect. Atrial fibrillation is treated by irradiating the atrial wall to destroy myocardial cells while continuously rotating the subject.

  17. Disaster Debris Recovery Database - Recovery

    Data.gov (United States)

    U.S. Environmental Protection Agency — The US EPA Disaster Debris Recovery Database (DDRD) promotes the proper recovery, recycling, and disposal of disaster debris for emergency responders at the federal,...

  18. Recovery actions in PRA [probabilistic risk assessment] for the Risk Methods Integration and Evaluation Program (RMIEP): Volume 1, Development of the data-based method

    International Nuclear Information System (INIS)

    Weston, L.M.; Whitehead, D.W.; Graves, N.L.

    1987-06-01

    In a probabilistic risk assessment (PRA) for a nuclear power plant, the analyst identifies a set of potential core damage events consisting of equipment failures and human errors and their estimated probabilities of occurrence. If operator recovery from an event within some specified time is considered, then the probability of this recovery can be included in the PRA. This report provides PRA analysts with an improved methodology for including recovery actions in a PRA. A recovery action can be divided into two distinct phases: a Diagnosis Phase (realizing that there is a problem with a critical parameter and deciding upon the correct course of action) and an Action Phase (physically accomplishing the required action). In this methodology, simulator data are used to estimate recovery probabilities for the diagnosis phase. Different time-reliability curves showing the probability of failure of diagnosis as a function of time from the compelling cue for the event are presented. These curves are based on simulator exercises, and the actions are grouped based upon their operational similarities. This is an improvement over existing diagnosis models that rely greatly upon subjective judgment to obtain such estimates. The action phase is modeled using estimates from available sources. The methodology also includes a recommendation on where and when to apply the recovery action in the PRA process

  19. A method for assessing the physical recovery of Antarctic desert pavements following human-induced disturbances: a case study in the Ross Sea region of Antarctica.

    Science.gov (United States)

    O'Neill, Tanya A; Balks, Megan R; López-Martínez, Jerónimo; McWhirter, Judi L

    2012-12-15

    With increasing visitor numbers an understanding of the impacts of human activities in Antarctic terrestrial environments has become important. The objective of this study was to develop a means for assessing recovery of the ground surface desert pavement following physical disturbance. A set of 11 criteria were identified to assess desert pavement recovery. Assessed criteria were: embeddedness of surface clasts; impressions of removed clasts; degree of clast surface weathering; % overturned clasts; salt on underside of clasts; development of salt coatings; armouring per m(2); colour contrast; evidence of subsidence/melt out; accumulation of salt on cut surfaces; and evidence of patterned ground development. Recovery criteria were assigned a severity/extent rating on a scale from zero to four, zero being highly disturbed, and four being undisturbed. A relative % recovery for each criteria was calculated for each site by comparison with a nearby undisturbed control area, and an overall Mean Recovery Index (MRI) was assigned to each pavement surface. To test the method, 54 sites in the Ross Sea region of Antarctica were investigated including areas disturbed by: bulldozer scraping for road-fill, contouring for infrastructure, geotechnical investigations, and experimental treading trial sites. Disturbances had occurred at timescales ranging from one week to 50 years prior to assessment. The extent of desert pavement recovery at the sites investigated in this study was higher than anticipated. Fifty of the 54 sites investigated were in an intermediate, or higher, stage of desert pavement recovery, 30 sites were in an advanced stage of recovery, and four sites were indistinguishable from adjacent control sites (MRI = 100%). It was found that active surfaces, such as the gravel beach deposits at the Greenpeace World Park Base site at Cape Evans, the aeolian sand deposits at Bull Pass, and the alluvial fan deposits of the Loop Moraine field campsite, recovered relatively

  20. Investigation of spore forming bacterial flooding for enhanced oil recovery in a North Sea chalk Reservoir

    DEFF Research Database (Denmark)

    Halim, Amalia Yunita; Nielsen, Sidsel Marie; Eliasson Lantz, Anna

    2015-01-01

    Little has been done to study microbial enhanced oil recovery (MEOR) in chalk reservoirs. The present study focuses on core flooding experiments designed to see microbial plugging and its effect on oil recovery. A pressure tapped core holder was used for this purpose. A spore forming bacteria...... Bacillus licheniformis 421 was used as it was shown to be a good candidate in a previous study. Bacterial spore can penetrate deeper into the chalk rock, squeezing through the pore throats. Our results showed that injection of B. licheniformis 421 as a tertiary oil recovery method, in the residual oil...... saturation state, was able to produce additionally 1.0-2.3% original oil in place (OOIP) in homogeneous cores and 6.9-8.8% OOIP in heterogeneous cores. In addition, the pressure gradient was much higher in the heterogeneous cores, which confirms that bacterial selective plugging plays an important role...

  1. Rethinking the Tertiary Mathematics Curriculum

    Science.gov (United States)

    Petocz, Peter; Reid, Anna

    2005-01-01

    Mathematics curriculum at the tertiary level is located within a range of social and cultural theories, and is often constructed by academics seeking to promulgate a particular view of mathematics. We argue that such a curriculum should incorporate a real acknowledgement of the different ways in which students understand the nature of mathematics…

  2. Time-dependent recovery of in vivo binding sites after drug dosing: A method for radiotracer evaluation

    International Nuclear Information System (INIS)

    Kilbourn, Michael R.

    1997-01-01

    The recovery of in vivo binding sites for (±)-α-[ 11 C]methoxytetrabenazine, a radioligand for the monoamine vesicular transporter (VMAT2), was determined in mouse brain at various times following a pharmacological dose of tetrabenazine. Concentrations of in vivo radioligand binding sites progressively increased and had reached control values by 8.5 h, and this recovery was consistent with the pharmacokinetics of the competing drug tetrabenazine and its active metabolite, dihydrotetrabenazine. This study demonstrates a simple experimental protocol of using a single dose of a reversible competing drug and time-dependent measurements of in vivo binding of a radioligand. This protocol is suitable for testing the sensitivity of an in vivo radiotracer for measurement of varying concentrations of in vivo binding sites

  3. Comparative evaluation of GenoType MTBDRplus line probe assay with solid culture method in early diagnosis of multidrug resistant tuberculosis (MDR-TB at a tertiary care centre in India.

    Directory of Open Access Journals (Sweden)

    Raj N Yadav

    Full Text Available The objectives of the study were to compare the performance of line probe assay (GenoType MTBDRplus with solid culture method for an early diagnosis of multidrug resistant tuberculosis (MDR-TB, and to study the mutation patterns associated with rpoB, katG and inhA genes at a tertiary care centre in north India.In this cross-sectional study, 269 previously treated sputum-smear acid-fast bacilli (AFB positive MDR-TB suspects were enrolled from January to September 2012 at the All India Institute of Medical Sciences hospital, New Delhi. Line probe assay (LPA was performed directly on the sputum specimens and the results were compared with that of conventional drug susceptibility testing (DST on solid media [Lowenstein Jensen (LJ method].DST results by LPA and LJ methods were compared in 242 MDR-TB suspects. The LPA detected rifampicin (RIF resistance in 70 of 71 cases, isoniazid (INH resistance in 86 of 93 cases, and MDR-TB in 66 of 68 cases as compared to the conventional method. Overall (rifampicin, isoniazid and MDR-TB concordance of the LPA with the conventional DST was 96%. Sensitivity and specificity were 98% and 99% respectively for detection of RIF resistance; 92% and 99% respectively for detection of INH resistance; 97% and 100% respectively for detection of MDR-TB. Frequencies of katG gene, inhA gene and combined katG and inhA gene mutations conferring all INH resistance were 72/87 (83%, 10/87 (11% and 5/87 (6% respectively. The turnaround time of the LPA test was 48 hours.The LPA test provides an early diagnosis of monoresistance to isoniazid and rifampicin and is highly sensitive and specific for an early diagnosis of MDR-TB. Based on these findings, it is concluded that the LPA test can be useful in early diagnosis of drug resistant TB in high TB burden countries.

  4. Multi-stage classification method oriented to aerial image based on low-rank recovery and multi-feature fusion sparse representation.

    Science.gov (United States)

    Ma, Xu; Cheng, Yongmei; Hao, Shuai

    2016-12-10

    Automatic classification of terrain surfaces from an aerial image is essential for an autonomous unmanned aerial vehicle (UAV) landing at an unprepared site by using vision. Diverse terrain surfaces may show similar spectral properties due to the illumination and noise that easily cause poor classification performance. To address this issue, a multi-stage classification algorithm based on low-rank recovery and multi-feature fusion sparse representation is proposed. First, color moments and Gabor texture feature are extracted from training data and stacked as column vectors of a dictionary. Then we perform low-rank matrix recovery for the dictionary by using augmented Lagrange multipliers and construct a multi-stage terrain classifier. Experimental results on an aerial map database that we prepared verify the classification accuracy and robustness of the proposed method.

  5. Secondary and tertiary gas injection in fractured carbonate rock: Experimental study

    Energy Technology Data Exchange (ETDEWEB)

    Karimaie, H.; Torsaeter, O. [SPE, NTNU (Norway); Darvish, G.R. [SPE, STATOIL (Norway); Lindeberg, E. [SPE, SINTEF (Norway)

    2008-09-15

    The use of CO{sub 2} has received considerable interest as a method of EOR but a major drawback is its availability and increasing cost. Therefore, as the number of CO{sub 2} injection projects increase, an alternative must be considered to meet the economic considerations. For this reason attention has been directed to nitrogen injection which may be a good substitute for CO{sub 2}. The purpose of the experiments described in this paper was to investigate the efficiency of oil recovery by CO{sub 2} and N{sub 2} in fractured carbonate rock. The combined effects of gravity drainage and component exchange between gas in fracture and oil in matrix on oil recovery in fractured reservoirs subjected to CO{sub 2} or nitrogen gas injection are experimentally studied. Laboratory experiments have been carried out on a low permeable outcrop chalk, as an analogue to a North Sea reservoir rock. This was surrounded by a fracture, established with a novel experimental set-up. The experiments aimed to investigate the potential of oil recovery by secondary and tertiary CO{sub 2} and nitrogen gas injection at high pressure high temperature condition. The matrix block was saturated using recombined binary mixture live oil (C{sub 1}-C{sub 7}), while the fracture was filled with a sealing material to obtain a homogeneous saturation. The sealing material was then removed by increasing the temperature which in turn creates the fracture surrounding the core. Gas was injected into the fracture at pressures above the bubble point of the oil. Oil recovery as a function of time was monitored during the experiments. Results from secondary gas injection experiments indicate that CO{sub 2} injection at elevated pressure and temperature is more efficient than N{sub 2} injection. Results from tertiary gas injection experiments also show that injection of CO{sub 2} could significantly recover the oil, even after waterflooding, compared to N{sub 2} injection. (author)

  6. Comparison of three methods for the recovery of skin pathogens from impetigo swabs collected in a remote community of Northern Territory, Australia.

    Science.gov (United States)

    Bowen, Asha C; Tong, Steven Y C; Chatfield, Mark D; Andrews, Ross M; Carapetis, Jonathan R

    2013-06-01

    Impetigo is a common infection in children living in remote areas. Immediate plating of impetigo swabs is the gold standard for bacterial recovery but is rarely feasible in remote regions. Bacterial culture increases our understanding of antibiotic resistance and strain diversity, which guides treatment protocols and epidemiological monitoring. We investigated three practical alternatives for recovering Streptococcus pyogenes and Staphylococcus aureus from transported swabs: dry swabs transported at 4°C with desiccant and plated within 48 h; swabs inoculated into skim milk tryptone glucose glycerol broth (STGGB), transported at 4°C, stored at -70°C and plated within 61 days; and ESwabs inoculated into Amies broth, transported at 4°C and plated within 48 h. Detection of Strep. pyogenes and Staph. aureus from simultaneously collected swabs was compared for the dry vs STGGB (36 sores) and the STGGB vs Amies (39 sores) methods. Swabs were collected from 43 children (75 sores sampled) in a remote community of Northern Territory, Australia in November 2011. The children had impetigo and were participating in the Skin Sore Trial [Australian Clinical Trials Registry ACTRN12609000858291]. Recovery of Strep. pyogenes for dry vs STGGB was 72% (26/36) and 92% (33/36) and for STGGB vs Amies was 92% (36/39) for both methods. Staphylococcus aureus recovery for dry vs STGGB was 69% (25/36) and 72% 26/36) and for STGGB vs Amies was 74% (29/39) and 85% (33/39). STGGB and Amies media provided higher recovery of Strep. pyogenes than dry swabs. These results and the opportunity to batch and store specimens for molecular studies support the use of STGGB transport media for future impetigo research.

  7. Hospital-acquired infections in a Nigerian tertiary health facility: An ...

    African Journals Online (AJOL)

    Hospital-acquired infections in a Nigerian tertiary health facility: An audit of surveillance reports. ... This study evaluated the occurrence of HAI in a foremost tertiary health facility over a 5-year period for the purpose of reinforcing control efforts. Materials and Methods: A retrospective survey of records from the infection control ...

  8. A retrospective review of snake bite victims admitted in a tertiary ...

    African Journals Online (AJOL)

    Objective: Snake bite remains major public health problem worldwide. We present our experience with cases of snake bites managed in our tertiary care teaching center of South India. Materials and Methods: The details of all patients with snake bite admitted to a tertiary teaching care hospital from 2010 to 2012 were ...

  9. Parathyroid carcinoma in tertiary hyperparathyroidism.

    Science.gov (United States)

    Kim, Byung Seup; Ryu, Han Suk; Kang, Kyung Ho; Park, Sung Jun

    2016-10-01

    Parathyroid carcinoma is a rare disease of unknown etiology. This study presents a case of parathyroid carcinoma in a patient with tertiary hyperparathyroidism. Despite a successful kidney transplantation, the intact parathyroid hormone (iPTH) level of the patient was elevated consistently and could not be controlled by medical therapy. Due to the development of tertiary hyperparathyroidism with bone pain and osteoporosis, subtotal parathyroidectomy was performed 4 months after the kidney transplantation. Histological evaluation revealed that one of four parathyroid lesions was a parathyroid carcinoma, while the others were diffuse hyperplasia. Postoperative laboratory studies indicated a decreased level of iPTH. A positron emission tomography-computed tomography performed 6 months after the operation revealed no evidence of local recurrence or distant metastasis. Copyright © 2013. Published by Elsevier Taiwan.

  10. Comparison of two ultra-sensitive methods for the determination of 232Th by recovery corrected pre-concentration radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Glover, S.E.; Qu, H.; LaMont, S.P.; Grimm, C.A.; Filby, R.H.

    2001-01-01

    The determination of isotopic thorium by alpha spectrometric methods is a routine practice for bioassay and environmental measurement programs. Alpha-spectrometry has excellent detection limits (by mass) for all isotopes of thorium except 232 Th due to its extremely long half-life. Improvements in the detection limit an sensitivity over previously reported methods of pre-concentration neutron activation analysis (PCNAA) for the recovery corrected, isotopic determination of thorium in various matrices is discussed. Following irradiation, the samples were dissolved, 231 Pa added as a tracer, and Pa isolated by two different methods and compared (extraction chromatography and anion exchange chromatography) followed by alpha spectrometry for recovery correction. Ion exchange chromatography was found to be superior for this application at this time, principally for reliability. The detection limit for 232 Th of 3.5 x 10 -7 Bq is almost three orders of magnitude lower than for alpha spectrometry using the PCRNAA method and one order of magnitude below previously reported PCNAA methods. (author)

  11. Critical review of real-time methods for solid waste characterisation: Informing material recovery and fuel production.

    Science.gov (United States)

    Vrancken, C; Longhurst, P J; Wagland, S T

    2017-03-01

    Waste management processes generally represent a significant loss of material, energy and economic resources, so legislation and financial incentives are being implemented to improve the recovery of these valuable resources whilst reducing contamination levels. Material recovery and waste derived fuels are potentially valuable options being pursued by industry, using mechanical and biological processes incorporating sensor and sorting technologies developed and optimised for recycling plants. In its current state, waste management presents similarities to other industries that could improve their efficiencies using process analytical technology tools. Existing sensor technologies could be used to measure critical waste characteristics, providing data required by existing legislation, potentially aiding waste treatment processes and assisting stakeholders in decision making. Optical technologies offer the most flexible solution to gather real-time information applicable to each of the waste mechanical and biological treatment processes used by industry. In particular, combinations of optical sensors in the visible and the near-infrared range from 800nm to 2500nm of the spectrum, and different mathematical techniques, are able to provide material information and fuel properties with typical performance levels between 80% and 90%. These sensors not only could be used to aid waste processes, but to provide most waste quality indicators required by existing legislation, whilst offering better tools to the stakeholders. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Effects of tripolar TENS on slow and fast motoneurons: a preliminary study using H-reflex recovery curve method.

    Science.gov (United States)

    Simorgh, L; Torkaman, G; Firoozabadi, S M

    2008-01-01

    This study aimed at examining the effect of tripolar TENS of vertebral column on the activity of slow and fast motoneurons on 10 healthy non-athlete women aged 22.7 +/- 2.21 yrs. H-reflex recovery curve of soleus (slow) and gastrocnemius (fast) muscles were recorded before and after applying tripolar TENS. For recording of this curve, rectangular paired stimuli were applied on tibial nerve (with 40-520 ISI, frequency of 0.2 Hz and pulse width of 600 micros). Our findings showed that maximum H-reflex recovery in gastrocnemius muscle appeared in the shorter ISI, while in soleus muscle, it appeared in the longer ISI and its amplitude slightly decreased after applying tripolar TENS. It is suggested that tripolar TENS excites not only the skin but also Ia and Ib afferents in the dorsal column. A Synaptic interaction of these afferents in spinal cord causes the inhibition of type I MNs and facilitation of type II MNs. This effect can be used in muscle tone modulation.

  13. A Mixed-Methods Study of the Recovery Concept, "A Meaningful Day," in Community Mental Health Services for Individuals with Serious Mental Illnesses.

    Science.gov (United States)

    Myers, Neely A L; Smith, Kelly; Pope, Alicia; Alolayan, Yazeed; Broussard, Beth; Haynes, Nora; Compton, Michael T

    2016-10-01

    The recovery concept encompasses overcoming or managing one's illness, being physically and emotionally healthy, and finding meaningful purpose through work, school, or volunteering, which connects one to others in mutually fulfilling ways. Using a mixed-methods approach, we studied the emphasis on "a meaningful day" in the new Opening Doors to Recovery (ODR) program in southeast Georgia. Among 100 participants, we measured the meaningful day construct using three quantitative items at baseline (hospital discharge) and at 4-, 8-, and 12-month follow-up, finding statistically significant linear trends over time for all three measures. Complementary qualitative interviews with 30 individuals (ODR participants, family members, and ODR's Community Navigation Specialists and program leaders) revealed themes pertaining to companionship, productivity, achieving stability, and autonomy, as well as the concern about insufficient resources. The concept of "a meaningful day" can be a focus of clinical attention and measured as a person-centered outcome for clients served by recovery-oriented community mental health services.

  14. Epidemiology of paediatric poisoning reporting to a tertiary hospital ...

    African Journals Online (AJOL)

    Methods. We conducted a retrospective study from January 2007 to January 2012 at the Komfo Anokye Teaching Hospital, a tertiary hospital in Ghana. Results. Poisoning is a significant health problem in the study area. A total of 253 children reported to the hospital with poisoning over the 61month period, with an average ...

  15. Hand hygiene amongst dental professionals in a tertiary dental clinic ...

    African Journals Online (AJOL)

    Objective: To evaluate hand washing attitude and practices among Dentists and Dental Students treating patients in a Nigerian Tertiary Dental Clinic. Materials and Methods: A cross-sectional survey of Dentists and Dental Students treating patients in University of Benin Teaching Hospital was conducted between February ...

  16. An audit of colorectal cancer histopathology reports in a Tertiary ...

    African Journals Online (AJOL)

    Objective: To audit the completeness of histopathologic reports of Colorectal Cancer for prognostic information in a tertiary care hospital in the light of the minimum reporting standards for colorectal cancer resections recently proposed for use in Nigeria. Material and Methods: Twenty–five histopathology reports of colorectal ...

  17. Maternal mortality audit in a tertiary health institution in Nigeria ...

    African Journals Online (AJOL)

    Introduction: Nigeria has the second highest number of maternal deaths in the world.The study aimed at determining the causes of and non-obstetric contributors to maternal mortality at a tertiary referral hospital. Materials and Methods: It was a prospective audit of all consecutive maternal deaths in the hospital over a ...

  18. Ectopic pregnancy experience in a tertiary health facility in South ...

    African Journals Online (AJOL)

    Background: Ectopic pregnancy is a life-threatening gynecological emergency, and a significant cause of maternal morbidity and mortality in Nigeria. Objective: To determine the incidence, clinical presentation, risk factors and management outcomes of ectopic pregnancies in a tertiary health facility. Methods: A retrospective ...

  19. Effectiveness of Using Games in Tertiary-Level Mathematics Classrooms

    Science.gov (United States)

    Afari, Ernest; Aldridge, Jill M.; Fraser, Barry J.

    2012-01-01

    The primary focus of this study was to investigate the effectiveness of games when used in tertiary-level mathematics classes in the United Arab Emirates. Our study incorporated a mixed-method approach that involved surveys (to assess students' perceptions of the learning environment and attitudes towards mathematics), interviews, observations of…

  20. Patterns of Eye Diseases in Children Visiting a Tertiary Teaching ...

    African Journals Online (AJOL)

    Background: About 19 million children worldwide live with visual impairments resulting from different ocular morbidities. This study aimed to identify the different causes of eye diseases in children visiting a tertiary eye centre at Jimma University Hospital. Methods: We conducted a retrospective review of charts of patients of ...

  1. Recovery in aluminium

    DEFF Research Database (Denmark)

    Gundlach, Carsten

    2006-01-01

    In the present thesis the development of a unique experimental method for volume characterisation of individual embedded crystallites down to a radius of 150 nm is presented. This method is applied to in-situ studies of recovery in aluminium. The method is an extension of 3DXRD microscopy, an X...... are represented as strings. To identify the strings a combination of a 5D connected component type algorithm and multi-peak fitting was found to be superior. The first use of the method was a study of recovery of a deformed aluminium alloy (AA1050). The aluminium alloy was deformed by cold rolling to a thickness...

  2. A COMPREHENSIVE ANALYSIS OF ISOLATED INFRANUCLEAR ABDUCENS NERVE PALSY IN A TERTIARY EYE CARE CENTRE

    Directory of Open Access Journals (Sweden)

    G. Dhamodara

    2017-01-01

    Full Text Available BACKGROUND A comprehensive analysis of the aetiology and clinical profile of isolated infranuclear abducens nerve palsy in a tertiary eye care centre. MATERIALS AND METHODS A hospital-based retrospective case series analysis of 90 isolated infranuclear neurogenic abducens nerve palsies. Documentation included age, gender, presenting complaints, history of diabetes mellitus, hypertension, mode of onset, progression of the disease, treatment given and recovery rate was evaluated. Detailed ophthalmic evaluation of both eyes including anterior segment examination, extraocular movements, diplopia charting and Hess charting. Thorough central nervous system examination and systemic examination was done. Inclusion Criteria- All isolated infranuclear neurogenic lesions of abducens nerve palsy. Exclusion Criteria- Conditions like supranuclear lesions, myasthenia, orbital inflammation and myopathies, false localising sign of abducens nerve palsy were excluded by appropriate testing and investigations. RESULTS Total cases were 90 patients. Mean age of presentation was between 3rd to 5th decades with male preponderance. Commonest presenting symptom was diplopia (71.1%, commonest cause being idiopathic neuritis (48%, diabetes mellitus (20%, hypertension (15%, trauma (10% and others (7%. CONCLUSION In our study, isolated infranuclear abducens nerve palsy with nonspecific aetiology predominantly affecting males of 3 rd to 5 th decade with variable recovery rates were seen. Hence, careful clinical examination in all cases is essential with close follow up on a long-time basis.

  3. Study on properties and testing methods of thermo-responsive cementing system for well cementing in heavy oil thermal recovery

    Science.gov (United States)

    Li, Lianjiang

    2017-08-01

    In this paper, thermo-responsive cement slurry system were being developed, the properties of conventional cement slurry, compressive strength high temperature of cement sheath, mechanical properties of cement sheath and thermal properties of cement sheath were being tested. Results were being used and simulated by Well-Life Software, Thermo-responsive cement slurry system can meet the requirements of heavy oil thermal recovery production. Mechanical and thermal properties of thermo-responsive cement sheath were being tested. Tensile fracture energy of the thermo-responsive cement sheath is larger than conventional cement. The heat absorption capacity of conventional cement sheath is larger than that of thermo-responsive cement sheath, this means more heat is needed for the unit mass once increasing 1.0 °C, which also indicates that thermo-responsive cement own good heat insulating and preservation effects. The heat conductivity coefficient and thermal expansion coefficient of thermo-responsive cement is less than and conventional cement, this means that thermo-responsive cement have good heat preservation and insulation effects with good thermal expansion stabilities.

  4. Development of copper recovery process from flotation tailings by a combined method of high‒pressure leaching‒solvent extraction.

    Science.gov (United States)

    Han, Baisui; Altansukh, Batnasan; Haga, Kazutoshi; Stevanović, Zoran; Jonović, Radojka; Avramović, Ljiljana; Urosević, Daniela; Takasaki, Yasushi; Masuda, Nobuyuki; Ishiyama, Daizo; Shibayama, Atsushi

    2018-06-15

    Sulfide copper mineral, typically Chalcopyrite (CuFeS 2 ), is one of the most common minerals for producing metallic copper via the pyrometallurgical process. Generally, flotation tailings are produced as a byproduct of flotation and still consist of un‒recovered copper. In addition, it is expected that more tailings will be produced in the coming years due to the increased exploration of low‒grade copper ores. Therefore, this research aims to develop a copper recovery process from flotation tailings using high‒pressure leaching (HPL) followed by solvent extraction. Over 94.4% copper was dissolved from the sample (CuFeS 2 as main copper mineral) by HPL in a H 2 O media in the presence of pyrite, whereas the iron was co‒dissolved with copper according to an equation given as C Cu  = 38.40 × C Fe . To avoid co‒dissolved iron giving a negative effect on the subsequent process of electrowinning, solvent extraction was conducted on the pregnant leach solution for improving copper concentration. The result showed that 91.3% copper was recovered in a stripped solution and 98.6% iron was removed under the optimal extraction conditions. As a result, 86.2% of copper was recovered from the concentrate of flotation tailings by a proposed HPL‒solvent extraction process. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Umbilical Cable Recovery Load Analysis

    Institute of Scientific and Technical Information of China (English)

    YAN Shu-wang; JIA Zhao-lin; FENG Xiao-wei; LI Shi-tao

    2013-01-01

    Umbilical cable is a kind of integrated subsea cable widely used in the exploration and exploitation of oil and gas field.The severe ocean environment makes great challenges to umbilical maintenance and repair work.Damaged umbilical is usually recovered for the regular operation of the offshore production system.Analysis on cables in essence is a two-point boundary problem.The tension load at the mudline must be known first,and then the recovery load and recovery angle on the vessel can be solved by use of catenary equation.The recovery analysis also involves umbilicalsoil interaction and becomes more complicated.Calculation methods for recovery load of the exposed and buried umbilical are established and the relationship between the position of touch down point and the recovery load as well as the recovery angle and recovery load are analyzed.The analysis results provide a theoretical reference for offshore on-deck operation.

  6. Method of flash evaporation and condensation – heat pump for deep cooling of coal-fired power plant flue gas: Latent heat and water recovery

    International Nuclear Information System (INIS)

    Li, Yuzhong; Yan, Min; Zhang, Liqiang; Chen, Guifang; Cui, Lin; Song, Zhanlong; Chang, Jingcai; Ma, Chunyuan

    2016-01-01

    Highlights: • A method is developed for deep cooling of flue gas in coal-fired boilers. • The method can recover both latent heat and water from flue gas. • The method utilizes FGD scrubber as a deep cooling exchanger. • The method adopts the direct heat exchange mode to avoid the corrosion problem. - Abstract: Flue gas waste heat recovery and utilization is an efficient means to improve the energy efficiency of coal-fired power plants. At present, the surface corrosion and fouling problems of heat exchanger hinder the development of flue gas deep cooling. In this study, a novel flue gas deep cooling method that can reduce flue gas temperature below the dew point of vapor to recover latent heat and obtain clean water simultaneously is proposed to achieve improved energy efficiency. The heat transfer mode of this method is the direct contact mode, which takes the scrubber, e.g. the flue gas desulfurization (FGD) scrubber, as the deep cooling exchanger. The flash evaporation and condensation (FEC) device and heat pump (HP) are utilized to provide low-temperature medium, such as FGD slurry or water, for washing and deep cooling flue gas, to collect recovered water, and to absorb recovered waste heat. This method is called as the FEC–HP method. This paper elaborated on two optional models of the proposed method. The mechanism for recovering heat and water was also analyzed using the customized flue gas humidity chart, and the method to quantitate recovered heat and water, as well as the results of the case of a 300 MW coal-fired generator set were provided. Net present value calculations showed that this method is profitable in the scenario of burning high-water-content coals. Several potential advantages of this method and suggestions for practical application were also discussed.

  7. Treatment of spent catalyst from the nitrogenous fertilizer industry-A review of the available methods of regeneration, recovery and disposal

    International Nuclear Information System (INIS)

    Singh, Bina

    2009-01-01

    Disposal of spent catalyst is a problem as it falls under the category of hazardous industrial waste. The recovery of metals from these catalysts is an important economic aspect as most of these catalysts are supported, usually on alumina/silica with varying percent of metal; metal concentration could vary from 2.5 to 20%. Metals like Ni, Mo, Co, Rh, Pt, Pd, etc., are widely used as a catalyst in chemical and petrochemical industries and fertilizer industries. They are generally supported on porous materials like alumina and silica through precipitation or impregnation processes. Many workers have adapted pyrometallurgy and Hydrometallurgy process for recovery of precious metals. Many workers have studied the recovery of nickel from a spent catalyst in an ammonia plant by leaching it in sulphuric acid solution (Hydrometallurgy). Ninety-nine percent of the nickel was recovered as nickel sulphate when the catalyst, having a particle size of 0.09 mm was dissolved in an 80% sulphuric acid solution for 50 min in at 70 deg. C. Many researcher have studied the extraction of metals from spent catalyst by roasting-extraction method (Pyrometallurgy). Chelating agents are the most effective extractants, which can be introduced in the soil washing fluid to enhance heavy metal extraction from contaminated soils. The advantages of chelating agents in soil cleanup include high efficiency of metal extraction, high thermodynamic stabilities of the metal complexes formed, good solubilities of the metal complexes, and low adsorption of the chelating agents on soils, But very few workers have attempted chelating agent to extract metals from spent catalyst.

  8. Recovery Spirituality

    Directory of Open Access Journals (Sweden)

    Ernest Kurtz

    2015-01-01

    Full Text Available There is growing interest in Alcoholics Anonymous (A.A. and other secular, spiritual, and religious frameworks of long-term addiction recovery. The present paper explores the varieties of spiritual experience within A.A., with particular reference to the growth of a wing of recovery spirituality promoted within A.A. It is suggested that the essence of secular spirituality is reflected in the experience of beyond (horizontal and vertical transcendence and between (connection and mutuality and in six facets of spirituality (Release, Gratitude, Humility, Tolerance, Forgiveness, and a Sense of Being-at-home shared across religious, spiritual, and secular pathways of addiction recovery. The growing varieties of A.A. spirituality (spanning the “Christianizers” and “Seculizers” reflect A.A.’s adaptation to the larger diversification of religious experience and the growing secularization of spirituality across the cultural contexts within which A.A. is nested.

  9. Development of a method for bacteria and virus recovery from heating, ventilation, and air conditioning (HVAC) filters.

    Science.gov (United States)

    Farnsworth, James E; Goyal, Sagar M; Kim, Seung Won; Kuehn, Thomas H; Raynor, Peter C; Ramakrishnan, M A; Anantharaman, Senthilvelan; Tang, Weihua

    2006-10-01

    The aim of the work presented here is to study the effectiveness of building air handling units (AHUs) in serving as high volume sampling devices for airborne bacteria and viruses. An HVAC test facility constructed according to ASHRAE Standard 52.2-1999 was used for the controlled loading of HVAC filter media with aerosolized bacteria and virus. Nonpathogenic Bacillus subtilis var. niger was chosen as a surrogate for Bacillus anthracis. Three animal viruses; transmissible gastroenteritis virus (TGEV), avian pneumovirus (APV), and fowlpox virus were chosen as surrogates for three human viruses; SARS coronavirus, respiratory syncytial virus, and smallpox virus; respectively. These bacteria and viruses were nebulized in separate tests and injected into the test duct of the test facility upstream of a MERV 14 filter. SKC Biosamplers upstream and downstream of the test filter served as reference samplers. The collection efficiency of the filter media was calculated to be 96.5 +/- 1.5% for B. subtilis, however no collection efficiency was measured for the viruses as no live virus was ever recovered from the downstream samplers. Filter samples were cut from the test filter and eluted by hand-shaking. An extraction efficiency of 105 +/- 19% was calculated for B. subtilis. The viruses were extracted at much lower efficiencies (0.7-20%). Our results indicate that the airborne concentration of spore-forming bacteria in building AHUs may be determined by analyzing the material collected on HVAC filter media, however culture-based analytical techniques are impractical for virus recovery. Molecular-based identification techniques such as PCR could be used.

  10. Loop transfer recovery for general observer architecture

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Søgaard-Andersen, Per; Stoustrup, Jakob

    1991-01-01

    A general and concise formulation is given of the loop transfer recovery (LTR) design problem based on recovery errors. Three types of recovery errors are treated: open loop recovery, sensitivity recovery and input-output recovery errors. The three corresponding versions of the asymptotic recovery...... recovery cases. This general recovery formulation covers all known observer based compensator types as special cases. The conditions given in this setting are effectively the aim of all known LTR design methods. The recovery formulation is interpreted in terms of a modelmatching problem as well, which...... is examined by means of the Q-parametrization. It is shown how the general controller obtained by the Q-parametrization can be written as a Luenberger observer based controller. In all cases, n controller states suffice to achieve recovery. The compensators are characterized for errors both on the input...

  11. Comparison of Saliva Collection Methods in Children with High-Functioning Autism Spectrum Disorders: Acceptability and Recovery of Cortisol

    Science.gov (United States)

    Putnam, Susan K.; Lopata, Christopher; Fox, Jeffery D.; Thomeer, Marcus L.; Rodgers, Jonathan D.; Volker, Martin A.; Lee, Gloria K.; Neilans, Erik G.; Werth, Jilynn

    2012-01-01

    This study compared cortisol concentrations yielded using three saliva collection methods (passive drool, salivette, and sorbette) in both in vitro and in vivo conditions, as well as method acceptability for a sample of children (n = 39) with High Functioning Autism Spectrum Disorders. No cortisol concentration differences were observed between…

  12. Tertiary syphilis in the lumbar spine: a case report.

    Science.gov (United States)

    Bai, Yang; Niu, Feng; Liu, Lidi; Sha, Hui; Wang, Yimei; Zhao, Song

    2017-07-24

    The incidence of tertiary syphilis involvement in the spinal column with destructive bone lesions is very rare. It is difficult to establish the correct diagnosis from radiographs and histological examination alone. Limited data are available on surgical treatment to tertiary syphilitic spinal lesions. In this article, we report a case of tertiary syphilis in the lumbar spine with osteolytic lesions causing cauda equina compression. A 44-year-old man who suffered with low back pain for 6 months and progressive radiating pain at lower extremity for 1 week. Radiologic findings showed osteolytic lesion and new bone formation in the parts of the bodies of L4 and L5. Serum treponema pallidum hemagglutination (TPHA) test was positive. A surgery of posterior debridement, interbody and posterolateral allograft bone fusion with instrumentation from L3 to S1 was performed. The low back pain and numbness abated after operation. But the follow-up radiographs showed absorption of the bone grafts and failure of instrumentation. A Charcot's arthropathy was formed between L4 and L5. It is challenging to diagnose the tertiary syphilis in the spine. Surgery is a reasonable auxiliary method to antibiotic therapy for patients who suffered with neuropathy. Charcot's arthropathy should be considered as an operative complication.

  13. Analysis and development of methods for the recovery of degraded tri-n-butyl phosphate (TBP)-30%V/V-dodecane

    International Nuclear Information System (INIS)

    Dalston, C.O.

    1984-01-01

    Tri-n-butyl phosphate associated with an inert hydrocarbon, is the principal solvent used in reprocessing of nuclear irradiated fuel arising of pressurized water reactors, nowdays. The combined action of radiation and nitric acid cause severe damage to solvent, in reprocessing steps. Then, the recovery of solvent gets some importance, since it decreases the amount of the waste and improves the economy of the process. A comparative analysis of several methods of the recovery of this solvent was done, such as: alkaline washing, adsortion with resins, adsorption with aluminium oxide, adsorption by active carbon and adsorption by vermiculite. Some modifications of the analytical test of 95 Zr and a mathematical definition of two new parameters were done: the degradation grade and the eficiency of recovering. Through this modified test of 95 Zr, the residence time and the rate of degraded solvent: recuperator, were determined. After the laboratory tests had been performed, vermiculite, associated with active carbon, were employed in the treatment of 50 liters of tri-n-butyl phosphate (30%V/V)-dodecane, degraded by hydrolysis. Succeding analyses were made to check up the potentialities of these solids in the recovering of this solvent. (Author) [pt

  14. Status of Enhanced Recovery by Thermal Methods Bilan et orientations de la récupération assistée par méthodes thermiques

    Directory of Open Access Journals (Sweden)

    Burger J.

    2006-11-01

    Full Text Available This paper describes the main developments in thermal methods of oil recovery in recent years. Particular attention is devoted to work aimed at improving understanding of the physical and chemical mechanisms involved and at increasing the efficiency of thermal processes. Their preferred domain of application is described and illustrated by typical cases. The contribution of thermal recovery to oil production in the United States and worldwide is discussed. Cet article décrit les principaux développements des méthodes thermiques de récupération du pétrole au cours des dernières années. L'attention est portée aux travaux visant à la compréhension des mécanismes physiques et chimiques mis en jeu et à accroître l'efficacité des procédés thermiques. Leur domaine d'application est présenté et illustré par des cas types. La contribution de la récupération thermique à la production d'hydrocarbures aux Etats-Unis et dans le monde est discutée.

  15. Listeria spp. in broiler flocks: recovery rates and species distribution investigated by conventional culture and the EiaFoss method

    DEFF Research Database (Denmark)

    Petersen, Line Hedegård; Madsen, Mogens

    2000-01-01

    The occurrence of Listeria monocytogenes in samples from broiler houses and cloacal swabs taken at the abattoir was investigated. An automated immunobased method (EiaFoss) was used, and 42 samples were also analysed by conventional culture; both methods were based on a two-step selective enrichment....... monocytogenes in enrichment broths may lead to an underestimation of the prevalence of L. monocytogenes. Furthermore, as L. inocua was also detected by the EiaFoss method, a significant amount of bacterial confirmation work had to be done. Of 42 samples analysed by conventional culture, four yielded L. inocua......, of which two were not positive by EiaFoss....

  16. Recovering Physical Activity Missing Data Measured by Accelerometers: A Comparison of Individual and Group-Centered Recovery Methods

    Science.gov (United States)

    Zhuang, Jie; Chen, Peijie; Wang, Chao; Jin, Jing; Zhu, Zheng; Zhang, Wenjie

    2013-01-01

    Purpose: The purpose of this study was to determine which method, individual information-centered (IIC) or group information-centered (GIC), is more efficient in recovering missing physical activity (PA) data. Method: A total of 2,758 Chinese children and youth aged 9 to 17 years old (1,438 boys and 1,320 girls) wore ActiGraph GT3X/GT3X+…

  17. Influence of Post-Mortem Sperm Recovery Method and Extender on Unstored and Refrigerated Rooster Sperm Variables.

    Science.gov (United States)

    Villaverde-Morcillo, S; Esteso, M C; Castaño, C; Santiago-Moreno, J

    2016-02-01

    Many post-mortem sperm collection techniques have been described for mammalian species, but their use in birds is scarce. This paper compares the efficacy of two post-mortem sperm retrieval techniques - the flushing and float-out methods - in the collection of rooster sperm, in conjunction with the use of two extenders, i.e., L&R-84 medium and Lake 7.1 medium. To determine whether the protective effects of these extenders against refrigeration are different for post-mortem and ejaculated sperm, pooled ejaculated samples (procured via the massage technique) were also diluted in the above extenders. Post-mortem and ejaculated sperm variables were assessed immediately at room temperature (0 h), and after refrigeration at 5°C for 24 and 48 h. The flushing method retrieved more sperm than the float-out method (596.5 ± 75.4 million sperm vs 341.0 ± 87.6 million sperm; p < 0.05); indeed, the number retrieved by the former method was similar to that obtained by massage-induced ejaculation (630.3 ± 78.2 million sperm). For sperm collected by all methods, the L&R-84 medium provided an advantage in terms of sperm motility variables at 0 h. In the refrigerated sperm samples, however, the Lake 7.1 medium was associated with higher percentages of viable sperm, and had a greater protective effect (p < 0.05) with respect to most motility variables. In conclusion, the flushing method is recommended for collecting sperm from dead birds. If this sperm needs to be refrigerated at 5°C until analysis, Lake 7.1 medium is recommended as an extender. © 2015 Blackwell Verlag GmbH.

  18. RECOVERY ACT - Methods for Decision under Technological Change Uncertainty and Risk Assessment for Integrated Assessment of Climate Change

    Energy Technology Data Exchange (ETDEWEB)

    Webster, Mort D. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Energy and Mineral Engineering

    2015-11-30

    This report presents the final outcomes and products of the project as performed both at the Massachusetts Institute of Technology and subsequently at Pennsylvania State University. The research project can be divided into three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment.

  19. RECOVERY ACT - Methods for Decision under Technological Change Uncertainty and Risk Assessment for Integrated Assessment of Climate Change

    Energy Technology Data Exchange (ETDEWEB)

    Webster, Mort David [MIT

    2015-03-10

    This report presents the final outcomes and products of the project as performed at the Massachusetts Institute of Technology. The research project consists of three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment. Results in each area is described in the report.

  20. Policy on reintegration of women with histories of substance abuse: A mixed methods study of predictors of relapse and facilitators of recovery

    Directory of Open Access Journals (Sweden)

    VanDeMark Nancy R

    2007-09-01

    Full Text Available Abstract Background The predominant U.S. policy approach toward individuals with substance abuse problems has relied on stigma and punishment by withholding access to education, cash assistance, housing, social support, and normal social roles. In contrast to this approach, the theory of reintegrative shaming asserts that providing individuals with the opportunity to reconnect with society is more effective in reducing potential to relapse to crime and drug abuse. Strategies that promote such reconnection include expanding access to basic needs and supportive relationships along with increasing opportunities to fully participate in mainstream social roles. Methods The present cross-sectional study examined the predictors of relapse and the facilitators of recovery in a sample of 325 women with histories of substance abuse. Analysis of secondary data, collected as part of a national cross-site study, employed a mixed methods approach conducting (1 logistic regression to examine the predictors of relapse and (2 an inductive qualitative analysis of responses from open-ended items to explore the women's perceptions of barriers to and facilitators of recovery. Results Results suggest that lower levels of instrumental support, affective support, and participation in normal roles (such as parent, employee, student, and citizen are significant predictors of relapse to drug use and criminal behaviors. Qualitative findings support the quantitative results, revealing that participating women perceived the variables of support and role participation as critical in facilitating their recovery. They also noted the importance of individual characteristics such as optimism and strength and emphasized the significance of their relationship with their children in motivating them to avoid relapse. Findings suggest that punitive policies toward women with substance abuse histories may be ineffective. Conclusion The author concludes that current policies designed to

  1. Use of nitrogen cryogun for separating duct tape and recovery of latent fingerprints with a powder suspension method.

    Science.gov (United States)

    Bailey, James A; Crane, Jonathan Stuart

    2011-07-15

    Duct tape is sometimes recovered as physical evidence in crimes. The purpose of this study was to determine the quality of latent prints on the adhesive and non-adhesive surfaces of duct tape samples that were separated using three methods. Three hundred donor fingerprint impressions were deposited on duct tape. Sections of duct tape were affixed to sections of cardboard and a fingerprint placed on the non-adhesive surface of the tape. A second layer of duct tape was prepared and a fingerprint placed on the adhesive side of the tape and then the tape was affixed to the piece of tape on the cardboard. After a 24-h period, the samples were separated using gradual force, liquid nitrogen applied with a cryogun and an adhesive neutralizer to separate the layers of tape. The recovered fingerprints were processed with a fingerprint powder suspension method. The recovered fingerprint images were evaluated and rated as +1, +2, or +3. The liquid nitrogen spray separation method yielded the highest number of +3 prints. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  2. Probabilistic accident sequence recovery analysis

    International Nuclear Information System (INIS)

    Stutzke, Martin A.; Cooper, Susan E.

    2004-01-01

    Recovery analysis is a method that considers alternative strategies for preventing accidents in nuclear power plants during probabilistic risk assessment (PRA). Consideration of possible recovery actions in PRAs has been controversial, and there seems to be a widely held belief among PRA practitioners, utility staff, plant operators, and regulators that the results of recovery analysis should be skeptically viewed. This paper provides a framework for discussing recovery strategies, thus lending credibility to the process and enhancing regulatory acceptance of PRA results and conclusions. (author)

  3. Oral food challenge outcomes in a pediatric tertiary care center

    OpenAIRE

    Abrams, Elissa M.; Becker, Allan B.

    2017-01-01

    Background Oral food challenges are the clinical standard for diagnosis of food allergy. Little data exist on predictors of oral challenge failure and reaction severity. Methods A retrospective chart review was done on all pediatric patients who had oral food challenges in a tertiary care pediatric allergy clinic from 2008 to 2010. Results 313 oral challenges were performed, of which the majority were to peanut (105), egg (71), milk (41) and tree nuts (29). There were 104 (33%) oral challenge...

  4. Method of neptunium recovery into the product stream of the Purex second codecontamination step for LWR fuel reprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Tsuboya, T; Nemoto, S; Hoshino, T; Segawa, T [Power Reactor and Nuclear Fuel Development Corp., Tokyo (Japan)

    1973-04-01

    The neptunium behavior in the second codecontamination step in Purex process of Power Reactor and Nuclear Fuel Development Corporation was experimentally studied, and the conditions for discharging neptunium in product stream were examined. Improved nitrous acid method was applied to the second codecontamination step. Nitrous acid (NaNO/sub 2/) was supplied to the 1st stage of extraction section at feed rate of 7.5 mM/hr, and hydrazine (hydrazine nitrate) was supplied to some stages near feed point at feed rate of 1.6 mM/hr, by using laboratory scale mixer-settlers having 6 ml of mixing volume and 17 ml of settling volume. Neptunium extraction behavior was analyzed by the code NEPTUN-I simulating neptunium concentration profile and by the code NEPTUN-II for calculating Np (V) and Np (VI) concentration. Batch experiments were performed for explaining the reduction reaction of Np (VI) in organic phase. After shaking the aqueous solution containing Np (VI) in 3 M nitric acid with the various volume ratios of TBP, both phases were separated, and the neptunium concentration was determined. In conclusion, the improved nitrous acid method was effective for the neptunium discharge in product stream when the flow ratio of organic phase to aqueous phase was increased to about three times.

  5. Recovery of vanadium oxide

    International Nuclear Information System (INIS)

    Bates, C.P.; Clark, N.E.

    1985-01-01

    This invention relates to the recovery of vanadium oxide from molten metal. The invention provides a method for recovering vanadium oxide from molten metal, which includes passing oxygen and at least one coolant gas or shroud into the molten metal by way of at least one elongate lance. The invention also provides an arrangement for the recovery of vanadium oxide from molten metal, which includes at least one elongate lance extending into the molten metal. The lance is provided with at least one elongate bore extending therethrough. Means are provided to allow at least oxygen and at least one coolant gas to pass through the lance and into the molten metal

  6. Effects of Primary, Secondary and Tertiary Education on Conflict Intensity in Africa

    Directory of Open Access Journals (Sweden)

    Julius A. Agbor

    2015-10-01

    Full Text Available This study investigates the impact of different schooling dimensions (primary, secondary and tertiary on the intensity of intra-state conflicts in 25 African states during the period 1989–2008. It uses fixed-effects and Generalized Methods of Moments (GMM estimators in an annualized panel data framework. Parameter estimates suggest the following (1 primary schooling broadly mitigates conflicts in Africa. However, in environments with high natural resource rents, it could ignite conflicts; (2 there is evidence, although not overwhelming, that secondary schooling potentially drives conflicts in Africa. There is also evidence that urbanization potentially drives conflicts in Africa. However, although secondary schooling and urbanization potentially drives conflicts, in environments where secondary schooling (urbanization is high, urbanization (secondary schooling mitigates conflicts; (3 there is no evidence of a strong direct positive impact of tertiary education on conflicts and conditioning on tertiary schooling, income inequality potentially drives conflicts in African states. However, in contexts where income inequality (tertiary schooling is high, tertiary schooling (inequality mitigates conflict. Two important policy implications follow from this study. First, in contexts where income inequality is high (for instance, in South Africa, governments should strive to foster tertiary education in order to reduce conflict. Second, where urbanization rates are high, they should foster both secondary and tertiary education. This study contributes to existing knowledge by clearly demonstrating the utility of distinguishing between different educational dimensions and the contexts wherein they matter for conflict mitigation in Africa.

  7. Regionalised tertiary psychiatric residential facilities.

    Science.gov (United States)

    Lesage, Alain; Groden, David; Goldner, Elliot M; Gelinas, Daniel; Arnold, Leslie M

    2008-01-01

    Psychiatric hospitals remain the main venue for long-term mental health care and, despite widespread closures and downsizing, no country that built asylums in the last century has done away with them entirely--with the recent exception of Italy. Differentiated community-based residential alternatives have been developed over the past decades, with staffing levels that range from full-time professional, to daytime only, to part-time/on-call. This paper reviews the characteristics of community-based psychiatric residential care facilities as an alternative to long-term care in psychiatric hospitals. It describes five factors decision makers should consider: 1. number of residential places needed; 2. staffing levels; 3. physical setting; 4. programming; and 5. governance and financing. In Italy, facilities with full-time professional staff have been developed since the mid-1990s to accommodate the last cohorts of patients discharged from psychiatric hospitals. In the United Kingdom, experiments with hostel wards since the 1980s have shown that home-like, small-scale facilities with intensive treatment and rehabilitation programming can be effective for the most difficult-to-place patients. More recently in Australia, Community Care Units (CCUs) have been applying this concept. In the Canadian province of British Columbia (BC), Tertiary Psychiatric Residential Facilities (TPRFs) have been developed as part of an effort to regionalise health and social services and downsize and ultimately close its only psychiatric hospital. This type of service must be further developed in addition to the need for forensic, acute-care and intermediate-level beds, as well as for community-based care such as assertive community treatment and intensive case management. All these types of services, together with long-term community-based residential care, constitute the elements of a balanced mental health care system. As part of a region's balanced mental health care plan, these Tertiary

  8. Robust nonhomogeneous training samples detection method for space-time adaptive processing radar using sparse-recovery with knowledge-aided

    Science.gov (United States)

    Li, Zhihui; Liu, Hanwei; Zhang, Yongshun; Guo, Yiduo

    2017-10-01

    The performance of space-time adaptive processing (STAP) may degrade significantly when some of the training samples are contaminated by the signal-like components (outliers) in nonhomogeneous clutter environments. To remove the training samples contaminated by outliers in nonhomogeneous clutter environments, a robust nonhomogeneous training samples detection method using the sparse-recovery (SR) with knowledge-aided (KA) is proposed. First, the reduced-dimension (RD) overcomplete spatial-temporal steering dictionary is designed with the prior knowledge of system parameters and the possible target region. Then, the clutter covariance matrix (CCM) of cell under test is efficiently estimated using a modified focal underdetermined system solver (FOCUSS) algorithm, where a RD overcomplete spatial-temporal steering dictionary is applied. Third, the proposed statistics are formed by combining the estimated CCM with the generalized inner products (GIP) method, and the contaminated training samples can be detected and removed. Finally, several simulation results validate the effectiveness of the proposed KA-SR-GIP method.

  9. Effects of storage temperature on the quantity and integrity of genomic DNA extracted from mice tissues: A comparison of recovery methods

    Directory of Open Access Journals (Sweden)

    Huda H. Al-Griw

    2017-08-01

    Full Text Available Efficient extraction of genomic DNA (gDNA from biological materials found in harsh environments is the first step for successful forensic DNA profiling. This study aimed to evaluate two methods for DNA recovery from animal tissues (livers, muscles, focusing on the best storage temperature for DNA yield in term of quality, quantity, and integrity for use in several downstream molecular techniques. Six male Swiss albino mice were sacrificed, liver and muscle tissues (n=32 were then harvested and stored for one week in different temperatures, -20C, 4C, 25C and 40C. The conditioned animal tissues were used for DNA extraction by Chelex-100 method or NucleoSpin Blood and Tissue kit. The extracted gDNA was visualized on 1.5% agarose gel electrophoresis to determine the quality of gDNA and analysed spectrophotometrically to determine the DNA concentration and the purity. Both methods, Chelex-100 and NucleoSpin Blood and Tissue kit found to be appropriate for yielding high quantity of gDNA, with the Chelex100 method yielding a greater quantity (P < 0.045 than the kit. At -20C, 4C, and 25C temperatures, the concentration of DNA yield was numerically lower than at 40C. The NucleoSpin Blood and Tissue kit produced a higher (P=0.031 purity product than the Chelex-100 method, particularly for muscle tissues. The Chelex-100 method is cheap, fast, effective, and is a crucial tool for yielding DNA from animal tissues (livers, muscles exposed to harsh environment with little limitations.

  10. Simple method for clonal selection of hepatitis A virus based on recovery of virus from radioimmunofocus overlays

    Energy Technology Data Exchange (ETDEWEB)

    Lemon, S M; Jansen, R W

    1985-06-01

    Hepatitis A virus (HAV), has been quantitated in cell culture by autoradiographic detection of foci of viral replication developing beneath an agarose overlay following fixation and 'staining' of the cell sheet with radiolabelled antibody (radioimmunofocus assay). Using a modification of this basic technique, a clonal variant of HM-175 strain HAV was isolated from agarose overlying individual radioimmunofoci. Virus recovered from the agarose was amplified in small volume cultures of BS-C-1 cells and identified in supernatant culture fluids by cDNA-RNA hybridizaton. No virus was recovered from agarose which did not overlie a focus of viral replication. This method offers a simple, yet relatively rapid and certain means of selecting clonal variants of non-plaquing viruses such as hepatitis A virus.

  11. A simple method for clonal selection of hepatitis A virus based on recovery of virus from radioimmunofocus overlays

    International Nuclear Information System (INIS)

    Lemon, S.M.; Jansen, R.W.

    1985-01-01

    Hepatitis A virus (HAV), has been quantitated in cell culture by autoradiographic detection of foci of viral replication developing beneath an agarose overlay following fixation and 'staining' of the cell sheet with radiolabelled antibody (radioimmunofocus assay). Using a modification of this basic technique, a clonal variant of HM-175 strain HAV was isolated from agarose overlying individual radioimmunofoci. Virus recovered from the agarose was amplified in small volume cultures of BS-C-1 cells and identified in supernatant culture fluids by cDNA-RNA hybridizaton. No virus was recovered from agarose which did not overlie a focus of viral replication. This method offers a simple, yet relatively rapid and certain means of selecting clonal variants of non-plaquing viruses such as hepatitis A virus. (Auth.)

  12. Recovery Of Chromium Metal (VI) Using Supported Liquid Membrane (SLM) Method, A study of Influence of NaCl and pH in Receiving Phase on Transport

    Science.gov (United States)

    Cholid Djunaidi, Muhammad; Lusiana, Retno A.; Rahayu, Maya D.

    2017-06-01

    Chromium metal(VI) is a valuable metal but in contrary has high toxicity, so the separation and recovery from waste are very important. One method that can be used for the separation and recovery of chromium (VI) is a Supported Liquid Membrane (SLM). SLM system contains of three main components: a supporting membrane, organic solvents and carrier compounds. The supported Membrane used in this research is Polytetrafluoroethylene (PTFE), organic solvent is kerosene, and the carrier compound used is aliquat 336. The supported liquid membrane is placed between two phases, namely, feed phase as the source of analyte (Cr(VI)) and the receiving phase as the result of separation. Feed phase is the electroplating waste which contains of chromium metal with pH variation about 4, 6 and 9. Whereas the receiving phase are the solution of HCl, NaOH, HCl-NaCl and NaOH-NaCl with pH variation about 1, 3, 5 and 7. The efficiency separation is determined by measurement of chromium in the feed and the receiving phase using AAS (Atomic Absorption Spectrophotometry). The experiment results show that transport of Chrom (VI) by Supported Liquid membrane (SLM) is influenced by pH solution in feed phase and receiving phase as well as NaCl in receiving phase. The highest chromium metal is transported from feed phase about 97,78%, whereas in receiving phase shows about 58,09%. The highest chromium metal transport happens on pH 6 in feed phase, pH 7 in receiving phase with the mixture of NaOH and NaCl using carrier compound aliquat 336.

  13. Application of decline curve analysis to estimate recovery factors for carbon dioxide enhanced oil recovery

    Science.gov (United States)

    Jahediesfanjani, Hossein

    2017-07-17

    IntroductionIn the decline curve analysis (DCA) method of estimating recoverable hydrocarbon volumes, the analyst uses historical production data from a well, lease, group of wells (or pattern), or reservoir and plots production rates against time or cumu­lative production for the analysis. The DCA of an individual well is founded on the same basis as the fluid-flow principles that are used for pressure-transient analysis of a single well in a reservoir domain and therefore can provide scientifically reasonable and accurate results. However, when used for a group of wells, a lease, or a reservoir, the DCA becomes more of an empirical method. Plots from the DCA reflect the reservoir response to the oil withdrawal (or production) under the prevailing operating and reservoir conditions, and they continue to be good tools for estimating recoverable hydrocarbon volumes and future production rates. For predicting the total recov­erable hydrocarbon volume, the DCA results can help the analyst to evaluate the reservoir performance under any of the three phases of reservoir productive life—primary, secondary (waterflood), or tertiary (enhanced oil recovery) phases—so long as the historical production data are sufficient to establish decline trends at the end of the three phases.

  14. A Comparative study of early postpartum IUCD insertion to interval IUCD insertion at Tertiary Care Centre

    OpenAIRE

    Roopal, Dr.; Bisht, Vandana

    2018-01-01

    Background: A Comparative study of early postpartum IUCD insertion to interval IUCD insertion at Tertiary Care Centre.Methods: This prospective study was conducted among 100 women at tertiary care centre, Haldwani, Nainital. Patients were divided in to two groups. Group A (n=50)-post placental insertion within 10 minutes of delivery of placenta. Group B (n=50)-Interval insertion after 6 weeks of delivery. Both groups were compared in terms of pain abdomen, bleeding, missing thread, expulsion,...

  15. Mixed analytical-stochastic simulation method for the recovery of a Brownian gradient source from probability fluxes to small windows.

    Science.gov (United States)

    Dobramysl, U; Holcman, D

    2018-02-15

    Is it possible to recover the position of a source from the steady-state fluxes of Brownian particles to small absorbing windows located on the boundary of a domain? To address this question, we develop a numerical procedure to avoid tracking Brownian trajectories in the entire infinite space. Instead, we generate particles near the absorbing windows, computed from the analytical expression of the exit probability. When the Brownian particles are generated by a steady-state gradient at a single point, we compute asymptotically the fluxes to small absorbing holes distributed on the boundary of half-space and on a disk in two dimensions, which agree with stochastic simulations. We also derive an expression for the splitting probability between small windows using the matched asymptotic method. Finally, when there are more than two small absorbing windows, we show how to reconstruct the position of the source from the diffusion fluxes. The present approach provides a computational first principle for the mechanism of sensing a gradient of diffusing particles, a ubiquitous problem in cell biology.

  16. [Evaluation of artificial digestion method on inspection of meat for Trichinella spiralis contamination and influence of the method on muscle larvae recovery].

    Science.gov (United States)

    Wang, Guo-Ying; Du, Jing-Fang; Dun, Guo-Qing; Sun, Wei-Li; Wang, Jin-Xi

    2011-04-01

    To evaluate the effect of artificial digestion method on inspection of meat for Trichinella spiralis contamination and its influence on activity and infectivity of muscle larvae. The mice were inoculated orally with 100 muscle larvae of T. spiralis and sacrificed on the 30th day following the infection. The muscle larvae of T. spiralis were recovered by three different test protocols employing variations of the artificial digestion method, i.e. the first test protocol evaluating digestion for 2 hours (magnetic stirrer method), the second test protocol evaluating digestion for 12 hours, and the third test protocol evaluating digestion for 20 hours. Each test group included ten samples, and each of which included 300 encapsulated larvae. Meanwhile, the activity of the recovered muscle larvae was also assessed. Forty mice were randomly divided into a control group and three digestion groups, so 4 groups (with 10 mice per group) in total. In the control group, each mouse was orally inoculated with 100 encapsulated larvae of T. spiralis. In all of the digestion test groups, each mouse was orally inoculated with 100 muscle larvae of T. spiralis. The larvae were then recovered from the different three test groups by the artificial digestion protocol variations. All the infected mice were sacrificed on the 30th day following the infection, and the muscle larvae of T. spiralis were examined respectively by the diaphragm compression method and the magnetic stirrer method. The muscle larvae detection rates were 78.47%, 76.73%, and 68.63%, the death rates were 0.59%, 4.60%, and 7.43%, and the reduction rates were 60.56%, 61.94%, and 73.07%, in the Test Group One (2-hour digestion), Test Group Two (12-hour digestion) and Test Group Three (20-hour digestion), respectively. The magnetic stirrer method (2-hour digestion method) is superior to both 12-hour digestion and 20-hour digestion methods when assessed by the detection rate, activity and infectivity of muscle larvae.

  17. Recruitment Of International Students Into Cameroon Tertiary ...

    African Journals Online (AJOL)

    Recruitment Of International Students Into Cameroon Tertiary Institutions In The Absence Of International Offices. ... The present system of recruiting international students is haphazardly been handled by ... AJOL African Journals Online.

  18. Learning Enhancement in Tertiary Institutions Using Mobile ...

    African Journals Online (AJOL)

    2012-12-01

    Dec 1, 2012 ... model that is still by far the dominant mode of education and learning in tertiary institutions. In addition to identifying ... education has there been a technology that ..... Determinant of Mobile Learning Acceptance: An Empirical.

  19. Corrosion evaluation of heat recovery steam generator superheater tube in two methods of testing: Tafel polarization and electrochemical impedance spectroscopy (EIS)

    Science.gov (United States)

    Santoso, Rio Pudjidarma; Riastuti, Rini

    2018-05-01

    The purpose of this research is to evaluate the corrosion process which occurs on the water side of Heat Recovery Steam Generator (HRSG) superheater tube. The tube was 13CrMo44 and divided into 3 types of specimen: new tube, used tube (with oxide layer on surface), cleaned-used tube (without oxide layer on surface). The evaluation of corrosion parameters wasperformed using deaerated ultra-high purity water (boiler feed water) in two methods of testing: Tafel polarization and Electrochemical Impedance Spectroscopy (EIS). Tafel polarization was excellent as its capability to show the value of corrosion current and the corrosion rate explicitly, on the other hand, EIS was excellent as its capability to explain for corrosion mechanism on metal interface in detail. Both methods showed that the increase of electrolyte temperature from 25°C to 55°C would increase the corrosion rate with the mechanism of decreasing polarization resistance due to thinning out the passive film thickness and enlarge the area of reduction reaction of cathode. Magnetite oxide scale which is laid on the surface of used tube specimen shows protective nature to reduce the corrosion rate, and clear up this oxide would increase the corrosion rate back as new tube.

  20. Power recovery method for testing the efficiency of the ECD of an integrated generation unit for offshore wind power and ocean wave energy

    Institute of Scientific and Technical Information of China (English)

    CHEN WeiXing; GAO Feng; MENG XiangDun; REN AnYe; HU Yan

    2017-01-01

    Offshore wind power and ocean wave energy are clean,renewable and rich resources.The integrated generation unit for the two kinds of energy is introduced.The energy conversion device (ECD) is utilized to convert the mechanical energy absorbed from the wind power and wave energy into the hydraulic energy,the conversion efficiency of which is significant.In this paper,a power recovery method for testing the efficiency of the ECD is proposed.A simulation desktop is developed to validate the proposed method.The efficiency of the ECD is influenced by the hydraulic cylinders and the mechanical transmission.Here,the static efficiency of the hydraulic cylinders of the ECD is tested first.The results show that the static mechanical efficiency is about 95 % and that the volumetric efficiency is over 99%.To test the effects induced by the mechanical transmission of the ECD,each hydraulic cylinder of the ECD is substituted with two springs.Then the power loss of the ECDM under different rotational speeds is obtained.Finally,a test platform is built and the efficiency of the ECD under different rotational speeds and pressures is obtained.The results show that the efficiency is about 80%.

  1. Mudflow utilization for construction materials of tertiary irrigation canal lining

    Science.gov (United States)

    Azis, Subandiyah; Kustamar

    2017-11-01

    Mudflow in Siring Village, Sidoarjo Regency, Indonesia, has been in eruption since May 29, 2006. It still shows irregular large bursts which loaded in a sludge reservoir with capacity of 59 million m3. From 2007 until 2015, there were more than 20 studies which concluded that the mudflow could be used as a mixture of building materials. However, the studies were not detailed and needed further research. This research aims to investigate the use of mudflow as tertiary irrigation canal lining material. This research comes with several laboratory tests to obtain a mixture that is solid and water-resistant. The methods that were used are descriptive methods as follows: 1). Sampling of mudflow, to be analyzed in Material Testing Laboratory. 2). Sampling of soil at research site, to be analyzed in Soil Mechanics Laboratory 3). Mixing of materials which are consist of mudflow and other materials and doing strength test in the laboratory. 4). Installation of tertiary irrigation canal lining using materials that have been tested. 5). Observation of lining's strength inactive soil pressure-bearing and its impermeability. It is expected that the results of this research will be applied extensively throughout the tertiary irrigation canals, so mudflow can be utilized as raw materials that are environmentally friendly, which are able to help preserving the environment, also to reduce the removal of sand / rock in the river, which has been used for lining materials, that benefits in preventing damage to the river ecosystem.

  2. Non-contrast-enhanced hepatic MR angiography: Do two-dimensional parallel imaging and short tau inversion recovery methods shorten acquisition time without image quality deterioration?

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, Kotaro, E-mail: kotaro@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan); Isoda, Hiroyoshi, E-mail: sayuki@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan); Okada, Tomohisa, E-mail: tomokada@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan); Kamae, Toshikazu, E-mail: toshi13@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan); Arizono, Shigeki, E-mail: arizono@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan); Hirokawa, Yuusuke, E-mail: yuusuke@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan); Shibata, Toshiya, E-mail: ksj@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan); Togashi, Kaori, E-mail: ktogashi@kuhp.kyoto-u.ac.jp [Department of Diagnostic Imaging and Nuclear Medicine, Kyoto University, Graduate School of Medicine, 54 Kawahara-cho, Shogoin, Sakyo-ku, Kyoto 606-8507 (Japan)

    2011-01-15

    Objective: To study whether shortening the acquisition time for selective hepatic artery visualization is feasible without image quality deterioration by adopting two-dimensional (2D) parallel imaging (PI) and short tau inversion recovery (STIR) methods. Materials and methods: Twenty-four healthy volunteers were enrolled. 3D true steady-state free-precession imaging with a time spatial labeling inversion pulse was conducted using 1D or 2D-PI and fat suppression by chemical shift selective (CHESS) or STIR methods. Three groups of different scan conditions were assigned and compared: group A (1D-PI factor 2 and CHESS), group B (2D-PI factor 2 x 2 and CHESS), and group C (2D-PI factor 2 x 2 and STIR). The artery-to-liver contrast was quantified, and the quality of artery visualization and overall image quality were scored. Results: The mean scan time was 9.5 {+-} 1.0 min (mean {+-} standard deviation), 5.9 {+-} 0.8 min, and 5.8 {+-} 0.5 min in groups A, B, and C, respectively, and was significantly shorter in groups B and C than in group A (P < 0.01). The artery-to-liver contrast was significantly better in group C than in groups A and B (P < 0.01). The scores for artery visualization and overall image quality were worse in group B than in groups A and C. The differences were statistically significant (P < 0.05) regarding the arterial branches of segments 4 and 8. Between group A and group C, which had similar scores, there were no statistically significant differences. Conclusion: Shortening the acquisition time for selective hepatic artery visualization was feasible without deterioration of the image quality by the combination of 2D-PI and STIR methods. It will facilitate using non-contrast-enhanced MRA in clinical practice.

  3. Non-contrast-enhanced hepatic MR angiography: Do two-dimensional parallel imaging and short tau inversion recovery methods shorten acquisition time without image quality deterioration?

    International Nuclear Information System (INIS)

    Shimada, Kotaro; Isoda, Hiroyoshi; Okada, Tomohisa; Kamae, Toshikazu; Arizono, Shigeki; Hirokawa, Yuusuke; Shibata, Toshiya; Togashi, Kaori

    2011-01-01

    Objective: To study whether shortening the acquisition time for selective hepatic artery visualization is feasible without image quality deterioration by adopting two-dimensional (2D) parallel imaging (PI) and short tau inversion recovery (STIR) methods. Materials and methods: Twenty-four healthy volunteers were enrolled. 3D true steady-state free-precession imaging with a time spatial labeling inversion pulse was conducted using 1D or 2D-PI and fat suppression by chemical shift selective (CHESS) or STIR methods. Three groups of different scan conditions were assigned and compared: group A (1D-PI factor 2 and CHESS), group B (2D-PI factor 2 x 2 and CHESS), and group C (2D-PI factor 2 x 2 and STIR). The artery-to-liver contrast was quantified, and the quality of artery visualization and overall image quality were scored. Results: The mean scan time was 9.5 ± 1.0 min (mean ± standard deviation), 5.9 ± 0.8 min, and 5.8 ± 0.5 min in groups A, B, and C, respectively, and was significantly shorter in groups B and C than in group A (P < 0.01). The artery-to-liver contrast was significantly better in group C than in groups A and B (P < 0.01). The scores for artery visualization and overall image quality were worse in group B than in groups A and C. The differences were statistically significant (P < 0.05) regarding the arterial branches of segments 4 and 8. Between group A and group C, which had similar scores, there were no statistically significant differences. Conclusion: Shortening the acquisition time for selective hepatic artery visualization was feasible without deterioration of the image quality by the combination of 2D-PI and STIR methods. It will facilitate using non-contrast-enhanced MRA in clinical practice.

  4. Oil removal of spent hydrotreating catalyst CoMo/Al{sub 2}O{sub 3} via a facile method with enhanced metal recovery

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yue [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Xu, Shengming, E-mail: smxu@tsinghua.edu.cn [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Beijing Key Lab of Radioactive Wastes Treatment, Tsinghua University, Beijing 100084 (China); Li, Zhen [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Wang, Jianlong [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Beijing Key Lab of Radioactive Wastes Treatment, Tsinghua University, Beijing 100084 (China); Zhao, Zhongwei [School of Metallurgy and Environment, Central South University, Changsha 410083, Hunan (China); Xu, Zhenghe, E-mail: zhenghe.xu@ualberta.ca [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Department of Chemical and Material Engineering, University of Alberta, Edmonton, Alberta T6G 1H9 (Canada)

    2016-11-15

    Highlights: • A novel approach for oil removal from spent hydrotreating catalysts has been developed. • Oil removal possibility is analyzed through surface characteristics. • Oil is successfully removed from spent catalysts via aqueous surfactant solution. • Over 98% Mo can be leached after oil removal and thermal treatment. • The proposed deoiling method helps to avoid detrimental impurity generation (CoMoO{sub 4}) and enhance metal recovery. - Abstract: Deoiling process is a key issue for recovering metal values from spent hydrotreating catalysts. The oils can be removed with organic solvents, but the industrialized application of this method is greatly hampered by the high cost and complex processes. Despite the roasting method is simple and low-cost, it generates hardest-to-recycle impurities (CoMoO{sub 4} or NiMoO{sub 4}) and enormous toxic gases. In this study, a novel and facile approach to remove oils from the spent hydrotreating catalysts is developed. Firstly, surface properties of spent catalysts are characterized to reveal the possibility of oil removal. And then, oils are removed with water solution under the conditions of 90 °C, 0.1 wt% SDS, 2.0 wt% NaOH and 10 ml/g L/S ratio for 4 h. Finally, thermal treatment and leaching tests are carried out to further explore the advantages of oil removal. The results show that no hardest-to-recycle impurity CoMoO{sub 4} is found in XPS spectra of thermally treated samples after deoiling and molybdenum is leached completely with sodium carbonate solution. It means that the proposed deoiling method can not only remove oils simply and without enormous harmful gases generating, but also avoid the generation of detrimental impurity and promote recycling of valuable metals from spent hydrotreating catalysts.

  5. Radioguided parathyroidectomy for tertiary hyperparathyroidism.

    Science.gov (United States)

    Somnay, Yash R; Weinlander, Eric; Alfhefdi, Amal; Schneider, David; Sippel, Rebecca S; Chen, Herbert

    2015-05-15

    Tertiary hyperparathyroidism (3HPT) is defined as the persistent hyperproduction of parathyroid hormone and resulting hypercalcemia after renal transplantation. Here, we examine the utility of radioguided parathyroidectomy (RGP) in patients with 3HPT. We reviewed a prospective surgery database containing 80 3HPT patients who underwent RGP from January 2001-July 2014 at our institution. We evaluated patient demographics, operative management, radioguided neoprobe utilization, and operative outcomes. Data are reported as mean ± standard error of the mean. The mean age of the patients was 52 ± 1 y, and 46% were male. A total of 69 patients had hyperplasia and received subtotal parathyroidectomy, whereas 5 patients had double adenomas and 6 patients had single adenomas. The average calcium level among 3HPT patients was 10.8 ± 0.1 mg/dL preoperatively and 8.7 ± 0.1 mg/dL postoperatively. In vivo radioguided counts normalized to background counts averaged 145 ± 4%, whereas ex vivo counts normalized to background counts averaged 69 ± 5%. All but one ex vivo count was >20%. Ectopically located glands were successfully localized in 38 patients using the gamma probe. Ex vivo percentage did not correlate with parathyroid gland weight, preoperative parathyroid hormone, or preoperative calcium. Our radioguided approach achieved normocalcemia in 96% of 3HPT patients undergoing RGP; two patients developed recurrent disease. In this series, all enlarged parathyroid glands were localized and resected using the gamma probe. Thus, RGP reliably localizes adenomatous, hyperplastic, and ectopically located glands in patients with 3HPT, resulting in high cure rate after resection. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. [Decomposition model of energy-related carbon emissions in tertiary industry for China].

    Science.gov (United States)

    Lu, Yuan-Qing; Shi, Jun

    2012-07-01

    Tertiary industry has been developed in recent years. And it is very important to find the factors influenced the energy-related carbon emissions in tertiary industry. A decomposition model of energy-related carbon emissions for China is set up by adopting logarithmic mean weight Divisia method based on the identity of carbon emissions. The model is adopted to analyze the influence of energy structure, energy efficiency, tertiary industry structure and economic output to energy-related carbon emissions in China from 2000 to 2009. Results show that the contribution rate of economic output and energy structure to energy-related carbon emissions increases year by year. Either is the contribution rate of energy efficiency or the tertiary industry restraining to energy-related carbon emissions. However, the restrain effect is weakening.

  7. A simplified method of walking track analysis to assess short-term locomotor recovery after acute spinal cord injury caused by thoracolumbar intervertebral disc extrusion in dogs.

    Science.gov (United States)

    Song, R B; Oldach, M S; Basso, D M; da Costa, R C; Fisher, L C; Mo, X; Moore, S A

    2016-04-01

    The purpose of this study was to evaluate a simplified method of walking track analysis to assess treatment outcome in canine spinal cord injury. Measurements of stride length (SL) and base of support (BS) were made using a 'finger painting' technique for footprint analysis in all limbs of 20 normal dogs and 27 dogs with 28 episodes of acute thoracolumbar spinal cord injury (SCI) caused by spontaneous intervertebral disc extrusion. Measurements were determined at three separate time points in normal dogs and on days 3, 10 and 30 following decompressive surgery in dogs with SCI. Values for SL, BS and coefficient of variance (COV) for each parameter were compared between groups at each time point. Mean SL was significantly shorter in all four limbs of SCI-affected dogs at days 3, 10, and 30 compared to normal dogs. SL gradually increased toward normal in the 30 days following surgery. As measured by this technique, the COV-SL was significantly higher in SCI-affected dogs than normal dogs in both thoracic limbs (TL) and pelvic limbs (PL) only at day 3 after surgery. BS-TL was significantly wider in SCI-affected dogs at days 3, 10 and 30 following surgery compared to normal dogs. These findings support the use of footprint parameters to compare locomotor differences between normal and SCI-affected dogs, and to assess recovery from SCI. Additionally, our results underscore important changes in TL locomotion in thoracolumbar SCI-affected dogs. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Tertiary work-up of apparent treatment-resistant hypertension.

    Science.gov (United States)

    Heimark, Sondre; Eskås, Per Anders; Mariampillai, Julian Eek; Larstorp, Anne Cecilie K; Høieggen, Aud; Fadl Elmula, Fadl Elmula M

    2016-10-01

    Treatment-resistant hypertension (TRH) has regained attention with development of new methods for treatment. However, the prevalence of TRH varies considerably from primary to secondary and tertiary care. We aimed to assess the prevalence of true TRH in a population of patients with apparent TRH in a university hospital setting of tertiary work-up and also investigate reasons for poor BP control and evaluate how work-up can be performed in general practice and secondary care. In this cohort study, we characterize a study population from Oslo Renal Denervation (RDN) Study. Patients (n = 83) were referred for RDN from secondary care. All patients underwent thorough medical investigation and 24-h ambulatory blood pressure measurements (24ABPM) after directly observed therapy (DOT). We then assessed reasons for lack of BP control. Fifty-three of 83 patients did not have true TRH. Main reasons for non-TRH were poor drug adherence (32%), secondary hypertension (30%) and white coat hypertension (15%). Forty-seven percent achieved blood pressure control after DOT with subsequent 24ABPM. There were otherwise no statistically significant differences in patient characteristics between the true TRH and the non-TRH group. Despite being a highly selected cohort referred for tertiary work-up of apparent TRH, BP control was achieved or secondary causes were identified in almost two thirds of the patients. Thorough investigation according to guidelines and DOT with subsequent 24ABPM is needed in work-up of apparent TRH.

  9. General Allylic C–H Alkylation with Tertiary Nucleophiles

    Science.gov (United States)

    2015-01-01

    A general method for intermolecular allylic C–H alkylation of terminal olefins with tertiary nucleophiles has been accomplished employing palladium(II)/bis(sulfoxide) catalysis. Allylic C–H alkylation furnishes products in good yields (avg. 64%) with excellent regio- and stereoselectivity (>20:1 linear:branched, >20:1 E:Z). For the first time, the olefin scope encompasses unactivated aliphatic olefins as well as activated aromatic/heteroaromatic olefins and 1,4-dienes. The ease of appending allyl moieties onto complex scaffolds is leveraged to enable this mild and selective allylic C–H alkylation to rapidly diversify phenolic natural products. The tertiary nucleophile scope is broad and includes latent functionality for further elaboration (e.g., aliphatic alcohols, α,β-unsaturated esters). The opportunities to effect synthetic streamlining with such general C–H reactivity are illustrated in an allylic C–H alkylation/Diels–Alder reaction cascade: a reactive diene is generated via intermolecular allylic C–H alkylation and approximated to a dienophile contained within the tertiary nucleophile to furnish a common tricyclic core found in the class I galbulimima alkaloids. PMID:24641574

  10. General allylic C-H alkylation with tertiary nucleophiles.

    Science.gov (United States)

    Howell, Jennifer M; Liu, Wei; Young, Andrew J; White, M Christina

    2014-04-16

    A general method for intermolecular allylic C-H alkylation of terminal olefins with tertiary nucleophiles has been accomplished employing palladium(II)/bis(sulfoxide) catalysis. Allylic C-H alkylation furnishes products in good yields (avg. 64%) with excellent regio- and stereoselectivity (>20:1 linear:branched, >20:1 E:Z). For the first time, the olefin scope encompasses unactivated aliphatic olefins as well as activated aromatic/heteroaromatic olefins and 1,4-dienes. The ease of appending allyl moieties onto complex scaffolds is leveraged to enable this mild and selective allylic C-H alkylation to rapidly diversify phenolic natural products. The tertiary nucleophile scope is broad and includes latent functionality for further elaboration (e.g., aliphatic alcohols, α,β-unsaturated esters). The opportunities to effect synthetic streamlining with such general C-H reactivity are illustrated in an allylic C-H alkylation/Diels-Alder reaction cascade: a reactive diene is generated via intermolecular allylic C-H alkylation and approximated to a dienophile contained within the tertiary nucleophile to furnish a common tricyclic core found in the class I galbulimima alkaloids.

  11. Recovery Efficiency, False Negative Rate, and Limit of Detection Performance of a Validated Macrofoam-Swab Sampling Method with Low Surface Concentrations of Two Bacillus anthracis Surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hutchison, Janine R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Deatherage Kaiser, Brooke L [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sydor, Michael A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barrett, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-03-31

    The performance of a macrofoam-swab sampling method was evaluated using Bacillus anthracis Sterne (BAS) and Bacillus atrophaeus Nakamura (BG) spores applied at nine low target amounts (2-500 spores) to positive-control plates and test coupons (2 in. × 2 in.) of four surface materials (glass, stainless steel, vinyl tile, and plastic). Test results from cultured samples were used to evaluate the effects of surrogate, surface concentration, and surface material on recovery efficiency (RE), false negative rate (FNR), and limit of detection. For RE, surrogate and surface material had statistically significant effects, but concentration did not. Mean REs were the lowest for vinyl tile (50.8% with BAS, 40.2% with BG) and the highest for glass (92.8% with BAS, 71.4% with BG). FNR values ranged from 0 to 0.833 for BAS and 0 to 0.806 for BG, with values increasing as concentration decreased in the range tested (0.078 to 19.375 CFU/cm2, where CFU denotes ‘colony forming units’). Surface material also had a statistically significant effect. A FNR-concentration curve was fit for each combination of surrogate and surface material. For both surrogates, the FNR curves tended to be the lowest for glass and highest for vinyl title. The FNR curves for BG tended to be higher than for BAS at lower concentrations, especially for glass. Results using a modified Rapid Viability-Polymerase Chain Reaction (mRV-PCR) analysis method were also obtained. The mRV-PCR results and comparisons to the culture results will be discussed in a subsequent report.

  12. Recovery Efficiency, False Negative Rate, and Limit of Detection Performance of a Validated Macrofoam-Swab Sampling Method with Low Surface Concentrations of Two Bacillus anthracis Surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hutchison, Janine R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kaiser, Brooke L. D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sydor, Michael A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barrett, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-06-16

    The performance of a macrofoam-swab sampling method was evaluated using Bacillus anthracis Sterne (BAS) and Bacillus atrophaeus Nakamura (BG) spores applied at nine low target amounts (2-500 spores) to positive-control plates and test coupons (2 in × 2 in) of four surface materials (glass, stainless steel, vinyl tile, and plastic). Test results from cultured samples were used to evaluate the effects of surrogate, surface concentration, and surface material on recovery efficiency (RE), false negative rate (FNR), and limit of detection. For RE, surrogate and surface material had statistically significant effects, but concentration did not. Mean REs were the lowest for vinyl tile (50.8% with BAS, 40.2% with BG) and the highest for glass (92.8% with BAS, 71.4% with BG). FNR values ranged from 0 to 0.833 for BAS and 0 to 0.806 for BG, with values increasing as concentration decreased in the range tested (0.078 to 19.375 CFU/cm2, where CFU denotes ‘colony forming units’). Surface material also had a statistically significant effect. A FNR-concentration curve was fit for each combination of surrogate and surface material. For both surrogates, the FNR curves tended to be the lowest for glass and highest for vinyl title. The FNR curves for BG tended to be higher than for BAS at lower concentrations, especially for glass. Results using a modified Rapid Viability-Polymerase Chain Reaction (mRV-PCR) analysis method were also obtained. The mRV-PCR results and comparisons to the culture results are discussed in a separate report.

  13. Disaster Debris Recovery Database - Recovery

    Science.gov (United States)

    The US EPA Region 5 Disaster Debris Recovery Database includes public datasets of over 6,000 composting facilities, demolition contractors, transfer stations, landfills and recycling facilities for construction and demolition materials, electronics, household hazardous waste, metals, tires, and vehicles in the states of Illinois, Indiana, Iowa, Kentucky, Michigan, Minnesota, Missouri, North Dakota, Ohio, Pennsylvania, South Dakota, West Virginia and Wisconsin.In this update, facilities in the 7 states that border the EPA Region 5 states were added to assist interstate disaster debris management. Also, the datasets for composters, construction and demolition recyclers, demolition contractors, and metals recyclers were verified and source information added for each record using these sources: AGC, Biocycle, BMRA, CDRA, ISRI, NDA, USCC, FEMA Debris Removal Contractor Registry, EPA Facility Registry System, and State and local listings.

  14. DEVELOPMENT OF BIOSURFACTANT-MEDIATED OIL RECOVERY IN MODEL POROUS SYSTEMS AND COMPUTER SIMULATIONS OF BIOSURFACTANT-MEDIATED OIL RECOVERY

    Energy Technology Data Exchange (ETDEWEB)

    M.J. McInerney; S.K. Maudgalya; R. Knapp; M. Folmsbee

    2004-05-31

    Current technology recovers only one-third to one-half of the oil that is originally present in an oil reservoir. Entrapment of petroleum hydrocarbons by capillary forces is a major factor that limits oil recovery (1, 3, 4). Hydrocarbon displacement can occur if interfacial tension (IFT) between the hydrocarbon and aqueous phases is reduced by several orders of magnitude. Microbially-produced biosurfactants may be an economical method to recover residual hydrocarbons since they are effective at low concentrations. Previously, we showed that substantial mobilization of residual hydrocarbon from a model porous system occurs at biosurfactant concentrations made naturally by B. mojavensis strain JF-1 if a polymer and 2,3-butanediol were present (2). In this report, we include data on oil recovery from Berea sandstone experiments along with our previous data from sand pack columns in order to relate biosurfactant concentration to the fraction of oil recovered. We also investigate the effect that the JF-2 biosurfactant has on interfacial tension (IFT). The presence of a co-surfactant, 2,3-butanediol, was shown to improve oil recoveries possibly by changing the optimal salinity concentration of the formulation. The JF-2 biosurfactant lowered IFT by nearly 2 orders of magnitude compared to typical values of 28-29 mN/m. Increasing the salinity increased the IFT with or without 2,3-butanediol present. The lowest interfacial tension observed was 0.1 mN/m. Tertiary oil recovery experiments showed that biosurfactant solutions with concentrations ranging from 10 to 60 mg/l in the presence of 0.1 mM 2,3-butanediol and 1 g/l of partially hydrolyzed polyacrylamide (PHPA) recovered 10-40% of the residual oil present in Berea sandstone cores. When PHPA was used alone, about 10% of the residual oil was recovered. Thus, about 10% of the residual oil recovered in these experiments was due to the increase in viscosity of the displacing fluid. Little or no oil was recovered at

  15. Study of optimal flip angle for inversion-recovery gradient echo method in delayed contrast-enhanced cardiac magnetic resonance imaging

    International Nuclear Information System (INIS)

    Ogawa, Masashi; Matsumura, Yoshio; Tsuchihashi, Toshio

    2013-01-01

    Delayed contrast-enhanced cardiac magnetic resonance imaging (MRI) is a valuable tool for detecting myocardial infarction and assessing myocardial viability. The standard viability MRI technique is the inversion-recovery gradient echo (IR-GRE) method. Several previous studies have demonstrated that this imaging technique provides superior image quality at high magnetic field strengths, e.g., 3.0 T. However, there are numerous possible flip angles. We investigated the optimal flip angle of IR-GRE in delayed contrast-enhanced cardiac MRI. Phantoms were made that modeled infarcted myocardium and normal myocardium after administration of contrast agent. To determine optimal flip angle, we compared the contrast-to-noise ratio (CNR) among these phantoms and evaluated the degree of artifacts induced by increased flip angle. The flip angle that showed the highest CNR for 2D IR-GRE and 3D IR-GRE was 30deg/15deg at 1.5 T and 25deg/15deg at 3.0 T. The flip angle that showed the highest CNR was independent of R-R interval. Streak artifacts induced by increased flip angle tended to occur more readily at 3.0 T than 1.5 T. The optimal flip angle for 2D IR-GRE and 3D IR-GRE at 1.5 T was 30deg and 15deg, respectively. At 3.0 T, taking into account the results for both CNR and streak artifacts, we concluded the optimal flip angle of 2D IR-GRE to be 15-20deg. (author)

  16. RAPP, a systematic e-assessment of postoperative recovery in patients undergoing day surgery: study protocol for a mixed-methods study design including a multicentre, two-group, parallel, single-blind randomised controlled trial and qualitative interview studies.

    Science.gov (United States)

    Nilsson, U; Jaensson, M; Dahlberg, K; Odencrants, S; Grönlund, Å; Hagberg, L; Eriksson, M

    2016-01-13

    Day surgery is a well-established practice in many European countries, but only limited information is available regarding postoperative recovery at home though there is a current lack of a standard procedure regarding postoperative follow-up. Furthermore, there is also a need for improvement of modern technology in assessing patient-related outcomes such as mobile applications. This article describes the Recovery Assessment by Phone Points (RAPP) study protocol, a mixed-methods study to evaluate if a systematic e-assessment follow-up in patients undergoing day surgery is cost-effective and improves postoperative recovery, health and quality of life. This study has a mixed-methods study design that includes a multicentre, two-group, parallel, single-blind randomised controlled trial and qualitative interview studies. 1000 patients >17 years of age who are undergoing day surgery will be randomly assigned to either e-assessed postoperative recovery follow-up daily in 14 days measured via smartphone app including the Swedish web-version of Quality of Recovery (SwQoR) or to standard care (ie, no follow-up). The primary aim is cost-effectiveness. Secondary aims are (A) to explore whether a systematic e-assessment follow-up after day surgery has a positive effect on postoperative recovery, health-related quality of life (QoL) and overall health; (B) to determine whether differences in postoperative recovery have an association with patient characteristic, type of surgery and anaesthesia; (C) to determine whether differences in health literacy have a substantial and distinct effect on postoperative recovery, health and QoL; and (D) to describe day surgery patient and staff experiences with a systematic e-assessment follow-up after day surgery.The primary aim will be measured at 2 weeks postoperatively and secondary outcomes (A-C) at 1 and 2 weeks and (D) at 1 and 4 months. NCT02492191; Pre-results. Published by the BMJ Publishing Group Limited. For permission to use

  17. CLINICAL SPECTRUM OF HYPONATRAEMIA IN TERTIARY CENTRE

    Directory of Open Access Journals (Sweden)

    Suresh Chincholi

    2017-02-01

    Full Text Available BACKGROUND Hyponatraemia is defined as a serum sodium level less than 135 mEq/L. High mortality among the patients of hyponatraemia is secondary to the underlying medical condition. Frequency is high in elderly patients. MATERIALS AND METHODS The study was conducted at a tertiary care centre (Basaveshwar Teaching and General Hospital, Gulbarga, from the period September 2014 to August 2016. These patients were evaluated for the underlying cause of hyponatraemia, which included detailed history and physical examination followed by appropriate laboratory investigations. Patients were followed up till the hyponatraemia was treated or patients were discharged from the hospital. RESULTS 100 patients of hyponatraemia were included in the study. 46% of the patients were asymptomatic. 33% patients had lethargy, 28% patients had postural dizziness and 19% had abnormal behaviour. Overall incidence of hyponatraemia was 4.58% in the hospitalised population, whereas its incidence in ICU patients was 22.4%. Twelve patients of symptomatic severe hyponatraemia were treated with hypertonic saline infusion, 25% patients were given loop diuretics with oral supplementation of sodium chloride for free water excretion in SIADH cases and in patients with hypervolaemia, hyponatraemia, fluid restriction was advised to 44 patients, oral supplementation of sodium chloride was given in 36 patients and 64 patients received normal saline. 9 patients included in the study died, 5 of which had advanced cirrhosis of liver as underlying cause. One patient developed Osmotic Demyelination Syndrome (ODS. CONCLUSION The possible cause of hyponatraemia should always be sought as outcome in severe hyponatraemia is governed by aetiology, and not by the serum sodium level. Treatment of severe symptomatic hyponatraemia with hypertonic saline is safe if recommendation for the rate of correction of hyponatraemia is strictly followed.

  18. Tertiary lymphoid organs in Takayasu Arteritis

    Directory of Open Access Journals (Sweden)

    Marc eClement

    2016-04-01

    Full Text Available Objective: The role of B cells in the pathogenesis of Takayasu arteritis (TA is controversial. We aimed to study the presence of tertiary lymphoid organs (TLOs in the aortic wall of TA patients.Methods: Hematoxylin and eosin–stained sections from aorta specimens from patients with TA were screened for TLOs. The presence of B cell aggregates (CD20, follicular dendritic cells (FDCs, CD21, and high endothelial venules (HEVs, PNAd was investigated by immunohistochemistry. Immune cells from the adventitial layer of one patient were characterized by flow cytometry. Demographic, medical history, laboratory, imaging, treatment and follow up data were extracted from medical records.Results: Aorta specimens from Bentall procedures were available from 7 patients (five female, aged 22 to 57 years with TA. Surgical treatment was performed at TA diagnosis (n=4 or at a median of 108 months [84-156] after TA diagnosis. Disease was active at surgery in four patients according to NIH score. B cell aggregates-TLOs containing HEVs were observed in the adventitia of all but one patient.. Of note, ectopic follicles containing CD21+ FDCs were found in all patients (4/4 with increased aortic FDG uptake before surgery but were absent in all but one patients (2/3 with no FDG uptake. In addition, flow cytometry analysis confirmed the accumulation of memory/germinal center–like B cells in the adventitial layer and showed the presence of antigen-experienced T follicular helper cells.Conclusion: Ectopic lymphoid neogenesis displaying functional features can be found in the aortic wall of a subset of patients with active TA. The function of these local B cell clusters on the pathogenesis of TA remains to be elucidated.

  19. Enzymes for Enhanced Oil Recovery (EOR)

    Energy Technology Data Exchange (ETDEWEB)

    Nasiri, Hamidreza

    2011-04-15

    Primary oil recovery by reservoir pressure depletion and secondary oil recovery by waterflooding usually result in poor displacement efficiency. As a consequence there is always some trapped oil remaining in oil reservoirs. Oil entrapment is a result of complex interactions between viscous, gravity and capillary forces. Improving recovery from hydrocarbon fields typically involves altering the relative importance of the viscous and capillary forces. The potential of many EOR methods depends on their influence on fluid/rock interactions related to wettability and fluid/fluid interactions reflected in IFT. If the method has the potential to change the interactions favorably, it may be considered for further investigation, i.e. core flooding experiment, pilot and reservoir implementation. Enzyme-proteins can be introduced as an enhanced oil recovery method to improve waterflood performance by affecting interactions at the oil-water-rock interfaces. An important part of this thesis was to investigate how selected enzymes may influence wettability and capillary forces in a crude oil-brine-rock system, and thus possibly contribute to enhanced oil recovery. To investigate further by which mechanisms selected enzyme-proteins may contribute to enhance oil recovery, groups of enzymes with different properties and catalytic functions, known to be interfacially active, were chosen to cover a wide range of possible effects. These groups include (1) Greenzyme (GZ) which is a commercial EOR enzyme and consists of enzymes and stabilizers (surfactants), (2) The Zonase group consists of two types of pure enzyme, Zonase1 and Zonase2 which are protease enzymes and whose catalytic functions are to hydrolyze (breakdown) peptide bonds, (3) The Novozyme (NZ) group consists of three types of pure enzyme, NZ2, NZ3 and NZ6 which are esterase enzymes and whose catalytic functions are to hydrolyze ester bonds, and (4) Alpha-Lactalbumin ( -La) which is an important whey protein. The effect of

  20. Modelling the harmonized tertiary Institutions Salary Structure ...

    African Journals Online (AJOL)

    This paper analyses the Harmonized Tertiary Institution Salary Structure (HATISS IV) used in Nigeria. The irregularities in the structure are highlighted. A model that assumes a polynomial trend for the zero step salary, and exponential trend for the incremental rates, is suggested for the regularization of the structure.

  1. American Tertiary mollusks of the genus Clementia

    Science.gov (United States)

    Woodring, W.P.

    1927-01-01

    Aside from its value as an aid in determining the age of Tertiary beds, the chief interest of the genus Clementia lies in the anomalous features of its present and former distribution. An attempt is made in this paper to trace its geologic history, to point out its paleobiologic significance, and to describe all the known American Tertiary species. The fossils from Colombia used in preparing this report were collected during explorations made under the direction of Dr. 0. B. Hopkins, chief geologist of the Imperial Oil Co. (Ltd.), who kindly donated them to the United States National Museum. Dr. T. Wayland Vaughan, of the Scripps Institution of Oceanography, furnished information relating to specimens collected by him in Mexico. Dr. Bruce L. Clark, of the University of California; Dr. G. Dallas Hanna, of the California Academy of Sciences; Dr. H. A. Pilsbry, of the Philadelphia Academy of Natural Sciences; and Dr. W. D. Matthew, of the American Museum of Natural History, generously loaned type specimens and other material. Doctor Clark and Doctor Hanna also gave information concerning the Tertiary species from California. Mr. Ralph B. Stewart, of the University of California, read the manuscript, and I have taken advantage of his suggestions. I am also indebted to Mr. L. R. Cox, of the British Museum, for information relating to the fossil species from Persia, Zanzibar, and Burma, and to Dr. Axel A. Olsson, of the International Petroleum Co., for data concerning undescribed Tertiary species from Peru.

  2. Misconception of emergency contraception among tertiary school ...

    African Journals Online (AJOL)

    Objective: To assess the degree of awareness and use of emergency contraception among tertiary school students in Akwa Ibom State, Nigeria. Design: A self-administered questionnaire survey. Setting: The Akwa Ibom State Polytechnic, Ikot Osurua, located on the outskirts of Ikot Ekpene local government area between ...

  3. Understanding Australian Aboriginal Tertiary Student Needs

    Science.gov (United States)

    Oliver, Rhonda; Rochecouste, Judith; Bennell, Debra; Anderson, Roz; Cooper, Inala; Forrest, Simon; Exell, Mike

    2013-01-01

    Drawing from a study of the experiences of Australian Aboriginal and Torres Strait Islander university students, this paper presents an overview of the specific needs of these students as they enter and progress through their tertiary education. Extracts from a set of case studies developed from both staff and student interviews and an online…

  4. Indigenous Students in the Tertiary Education Sector

    Science.gov (United States)

    Bandias, Susan; Fuller, Don; Larkin, Steven

    2014-01-01

    Important recent objectives of indigenous education policy in Australia have been aimed at redressing indigenous economic and social disadvantage through increasing student retention, progression and completion rates in both compulsory and post-compulsory education. The two sectors of the tertiary education system, vocational education and…

  5. SECTORAL ANALYSIS: GROWTH ACCOUNTING OF TERTIARY INDUSTRIES

    Directory of Open Access Journals (Sweden)

    Yahya Z. ALSHEHHI

    2017-08-01

    Full Text Available The tertiary sector is one of the modern styles of economic systems in view of the share it occupies in the field of production as well as employment occupied share. Hence, just like other lands, the UAE, witnessed an economic structural change similar to developed and developing nations, where the tertiary industries contributed 55.4% in 2015 to total country’s income. The empirical study aimed to analyze the contribution portion of growth in the tertiary industries through using the growth accounting framework in time-series from 1990 to 2015. The empirical study found that most of the industries contributed significantly to the growth of the tertiary sector. The contribution shares of growth due to labor and capital varied among industries. The main observed results show that there was a vice versa relationship between TFP performance and the size of labor, where the TFP positively corresponded with the decline in the size of labor specifically from 2010-2015.

  6. Substances stimulating recovery for radiation injury

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, A; Yonezawa, M; Katoh, N [Radiation Center of Osaka Prefecture, Sakai (Japan)

    1978-11-01

    A relationship between radiation injury and its recovery (intracellular recovery, intercellular recovery, or individual recovery) was discussed. In addition to histological researches in Japan, some substances (free radicals, endotoxin, vaccine, crude drugs, tissue extracts, blood platelet, etc.) stimulating recovery for radiation injury were introduced, and the progress of the study by the authors was summarized. Effects of a root of Panax ginseng (it is believed to accelerate segmentation of marrow cells, and synthesis of DNA and protein in rats and men), methods of its extracting and administration, its influences upon hemogram and organ weight in animal experiments, exclusion of side effects, period of administration, and purification of its effective components were reported.

  7. From recovery values to recovery-oriented practice?

    DEFF Research Database (Denmark)

    Dalum, Helle; Pedersen, Inge Kryger; Cunningham, Harry

    2015-01-01

    Introduction: The recovery model has influenced mental health services and fostered new standards for best practice. However, knowledge about how mental health care professionals (HCPs) experience recoveryoriented programs is sparse. Aim/Question: This paper explores HCPs' experiences when...... facilitating a recovery-oriented rehabilitation program. The research question is howdo HCPs experience a change in their attitude and practicewhen applying recovery-oriented programs? Methods: This paper draws on semi-structured in-depth qualitative interviews conducted with 16 HCPs experienced...... in facilitating a recovery-oriented rehabilitation program in either the USA or Denmark. Results: Three themes emerged from the HCPs' reflections on changes in attitudes and practices: “Hopeful Attitude” captures a change in the HCPs' attitude toward a more positive view on the future for clients' living...

  8. Economics of Tertiary Education - Challenges and dynamics of the public tertiary education in Albania

    Directory of Open Access Journals (Sweden)

    Gledian Llatja

    2016-07-01

    Full Text Available The tertiary education is a critic mechanism for the socio-economic progress, for individuals who aspire a brighter future and it is also considered an important catalyzer of the economic mobility (Department of Treasury and Department of Education, 2012, 2. Based on the positive role and impact that the tertiary education has on the sustainable development, President Obama once stated that it is of damage to treat education as a luxurious public service. In line with the general considerations about the tertiary education in the U.S. the parallel comparison with Albania comes as a direct interpretation of utopia in the education policy-making. As policies are usually drafted based on data and findings, in the case of Albania there is a lack of data on expenses on tertiary education as share of GDP. This stands also for the main limitation of the paper.

  9. Mapping cortical hand motor representation using TMS: A method to assess brain plasticity and a surrogate marker for recovery of function after stroke?

    Science.gov (United States)

    Lüdemann-Podubecká, Jitka; Nowak, Dennis Alexander

    2016-10-01

    Stroke is associated with reorganization within motor areas of both hemispheres. Mapping the cortical hand motor representation using transcranial magnetic stimulation may help to understand the relationship between motor cortex reorganization and motor recovery of the affected hand after stroke. A standardized review of the pertinent literature was performed. We identified 20 trials, which analyzed the relationship between the extent and/or location of cortical hand motor representation using transcranial magnetic stimulation and motor function and recovery of the affected hand. Several correlations were found between cortical reorganization and measures of hand motor impairment and recovery. A better understanding of the relationships between the extent and location of cortical hand motor representation and the motor impairment and motor recovery of the affected hand after stroke may contribute to a targeted use of non-invasive brain stimulation protocols. In the future motor mapping may help to guide brain stimulation techniques to the most effective motor area in an affected individual. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Diversification Management at Tertiary Education Level: A Review

    Science.gov (United States)

    Takwate, Kwaji Tizhe

    2016-01-01

    This paper examines the concept of management of diversification at tertiary education level in view of the growth of national secondary education system which vested high scramble for tertiary education was made in relation to question of access and expansion. This paper examines management of diversification at tertiary education level as a…

  11. Tertiary Education in the Czech Republic: The Pathway to Change

    Science.gov (United States)

    Pesik, Richard; Gounko, Tatiana

    2011-01-01

    This article analyzes recent policy proposals to reform Czech tertiary education. A brief overview of the evolution of Czech tertiary education presents the background against which emerging policy trends in education are examined. We relate the changes in tertiary education to the policy framework and recommendations of the OECD, underpinned by…

  12. Internships enhancing entrepreneurial intent and self-efficacy: Investigating tertiary-level entrepreneurship education programmes

    Directory of Open Access Journals (Sweden)

    Melodi Botha

    2016-09-01

    Full Text Available Background: Entrepreneurship education interventions are deemed effective when they enhance interns’ entrepreneurial intent (EI and entrepreneurial self-efficacy (ESE. Notwithstanding the emergence of internship as an experiential learning approach in entrepreneurship education, evidence about their potential to foster EI and ESE lacks systemisation. Aim: The aim of this study was to determine whether internships enhance EI and ESE. Furthermore, to what extent South African tertiary institutions include internships in their entrepreneurship and management curricula and the obstacles to such inclusion. Setting: South Africa has made a concerted effort to insert an entrepreneurship component across tertiary curricula. The evolution of this entrepreneurship component to experiential learning approaches is, however, unclear. Methods: A qualitative research approach was followed. Firstly, it reviewed empirical evidence for the positive relationship between internships and EI and ESE. Secondly, it conducted a survey of entrepreneurship and business management programmes at all 23 South African tertiary institutions and content analysed the retrieved information to determine whether such programmes include internships. Finally, 10 experts were interviewed to unveil the constraints inhibiting the inclusion of internships in tertiary curricula. Results: The results revealed empirical support for the positive influence of internships on both EI and ESE. Significant lack of inclusion of internships in tertiary curricula in South Africa emerged, owing mainly to administrative issues, curriculum re-design challenges, and lack of mentoring capacity. Conclusion: Tertiary-level entrepreneurship education programmes should include an internship component. The paper suggested that tertiary institutions pilot-test the inclusion of internships with a small number of students and a selected cohort of small business owners.

  13. The Predictors of Mortality, Recurrence and Functional Recovery in Ischemic Cerebrovascular Disease

    Directory of Open Access Journals (Sweden)

    Yakup Türkel

    2010-12-01

    Full Text Available OBJECTIVE: If the present data defining the prognostic predictors is examined carefully, a serious contradiction is noticed. In this study, we tried to determine which factors affect the sixth month mortality, recurrence and functional recovery measured quantitatively after ischemic stroke, among our own patients followed in a tertiary health care center. METHODS: Age, sex, the presence of hypertension, coronary heart disease, atrial fibrillation, diabetes mellitus, hyperlipidemia, previous stroke, stroke subtype, admittance mean blood pressure, admittance blood sugar, hemotocrit, the presence of left ventricle hypertrophy and ejection fraction was recorded for 223 patients with ischemic stroke. The scores for National Institute of Health Stroke Scale (NIHSS, modified Rankin Scale (mRS and Barthel Index (BI were recorded at the beginning and at the end of six months. The correlation of these 14 clinical and laboratory parameters with mortality, recurrence and recovery was examined statistically. RESULTS: Mortality rate was 33%, recurrence rate was 3.8%. Factors related with mortality were age, female gender, coronary artery disease, atrial fibrillation, low ejection fraction, low hematocrit and high admittance blood glucose (p 0.05. In the multivariate analyses, only, the effect of age, gender and hyperlipidemia on mortality was persisting (p< 0.05. Considering NIHSS, patients with high mean admittance blood pressure, considering mRS and BI younger patients and patients with lacunar infarcts had better recovery levels, while patients with previous strokes had poorer recovery (p< 0.05. CONCLUSION: Higher age and high admittance blood sugar were the most important determinants of mortality after ischemic stroke. Hyperlipidemia reduces the risk of death after stroke probably because of the neuroprotective effects of lipid lowering drugs. None of these parameters clearly affect functional recovery at the end of six month

  14. The Predictors of Mortality, Recurrence and Functional Recovery in Ischemic Cerebrovascular Disease

    Directory of Open Access Journals (Sweden)

    Yakup Türkel

    2010-12-01

    Full Text Available OBJECTIVE: If the present data defining the prognostic predictors is examined carefully, a serious contradiction is noticed. In this study, we tried to determine which factors affect the sixth month mortality, recurrence and functional recovery measured quantitatively after ischemic stroke, among our own patients followed in a tertiary health care center. METHODS: Age, sex, the presence of hypertension, coronary heart disease, atrial fibrillation, diabetes mellitus, hyperlipidemia, previous stroke, stroke subtype, admittance mean blood pressure, admittance blood sugar, hemotocrit, the presence of left ventricle hypertrophy and ejection fraction was recorded for 223 patients with ischemic stroke. The scores for National Institute of Health Stroke Scale (NIHSS, modified Rankin Scale (mRS and Barthel Index (BI were recorded at the beginning and at the end of six months. The correlation of these 14 clinical and laboratory parameters with mortality, recurrence and recovery was examined statistically. RESULTS: Mortality rate was 33%, recurrence rate was 3.8%. Factors related with mortality were age, female gender, coronary artery disease, atrial fibrillation, low ejection fraction, low hematocrit and high admittance blood glucose (p 0.05. In the multivariate analyses, only, the effect of age, gender and hyperlipidemia on mortality was persisting (p< 0.05. Considering NIHSS, patients with high mean admittance blood pressure, considering mRS and BI younger patients and patients with lacunar infarcts had better recovery levels, while patients with previous strokes had poorer recovery (p< 0.05. CONCLUSION: Higher age and high admittance blood sugar were the most important determinants of mortality after ischemic stroke. Hyperlipidemia reduces the risk of death after stroke probably because of the neuroprotective effects of lipid lowering drugs. None of these parameters clearly affect functional recovery at the end of six month.

  15. Oil recovery with vinyl sulfonic acid-acrylamide copolymers

    Energy Technology Data Exchange (ETDEWEB)

    Norton, C.J.; Falk, D.O.

    1973-12-18

    An aqueous polymer flood containing sulfomethylated alkali metal vinyl sulfonate-acrylamide copolymers was proposed for use in secondary or tertiary enhanced oil recovery. The sulfonate groups on the copolymers sustain the viscosity of the flood in the presence of brine and lime. Injection of the copolymer solution into a waterflooded Berea core, produced 30.5 percent of the residual oil. It is preferred that the copolymers are partially hydrolyzed.

  16. Recycling and recovery routes of plastic solid waste (PSW): A review

    International Nuclear Information System (INIS)

    Al-Salem, S.M.; Lettieri, P.; Baeyens, J.

    2009-01-01

    Plastic solid waste (PSW) presents challenges and opportunities to societies regardless of their sustainability awareness and technological advances. In this paper, recent progress in the recycling and recovery of PSW is reviewed. A special emphasis is paid on waste generated from polyolefinic sources, which makes up a great percentage of our daily single-life cycle plastic products. The four routes of PSW treatment are detailed and discussed covering primary (re-extrusion), secondary (mechanical), tertiary (chemical) and quaternary (energy recovery) schemes and technologies. Primary recycling, which involves the re-introduction of clean scrap of single polymer to the extrusion cycle in order to produce products of the similar material, is commonly applied in the processing line itself but rarely applied among recyclers, as recycling materials rarely possess the required quality. The various waste products, consisting of either end-of-life or production (scrap) waste, are the feedstock of secondary techniques, thereby generally reduced in size to a more desirable shape and form, such as pellets, flakes or powders, depending on the source, shape and usability. Tertiary treatment schemes have contributed greatly to the recycling status of PSW in recent years. Advanced thermo-chemical treatment methods cover a wide range of technologies and produce either fuels or petrochemical feedstock. Nowadays, non-catalytic thermal cracking (thermolysis) is receiving renewed attention, due to the fact of added value on a crude oil barrel and its very valuable yielded products. But a fact remains that advanced thermo-chemical recycling of PSW (namely polyolefins) still lacks the proper design and kinetic background to target certain desired products and/or chemicals. Energy recovery was found to be an attainable solution to PSW in general and municipal solid waste (MSW) in particular. The amount of energy produced in kilns and reactors applied in this route is sufficiently

  17. Clinical pathway across tertiary and community care after an interventional cardiology procedure.

    Science.gov (United States)

    Doran, K; Sampson, B; Staus, R; Ahern, C; Schiro, D

    1997-01-01

    Many patients who receive medical interventional cardiology procedures at a tertiary hospital live outside the metropolitan area and may experience fragmentation in care, less emotional support by family members, inaccurate and delayed communication, and lack of educational follow-up on discharge from the hospital. A clinical pathway titled "Heart Health Care Patterns" was developed to link acute phase, recovery phase, rehabilitation phase, and enhancement/maintenance phase. The 12-month clinical pathway combines Gordon's Functional Health Patterns and the Omaha System developed by the Omaha Visiting Nurse Association. The rating scale for outcomes assesses the patient at different phases to provide objective data and information throughout the year.

  18. A method for separating Antarctic postglacial rebound and ice mass balance using future ICESat Geoscience Laser Altimeter System, Gravity Recovery and Climate Experiment, and GPS satellite data

    OpenAIRE

    Velicogna, Isabella; Wahr, John

    2002-01-01

    Measurements of ice elevation from the Geoscience Laser Altimeter System (GLAS) aboard the Ice, Cloud, and Land Elevation Satellite can be combined with time-variable geoid measurements from the Gravity Recovery and Climate Experiment (GRACE) satellite mission to learn about ongoing changes in polar ice mass and viscoelastic rebound of the lithosphere under the ice sheet. We estimate the accuracy in recovering the spatially varying ice mass trend and postglacial rebound signals for Antarctica...

  19. Tertiary Treatment Process of Preserved Wastewater

    Directory of Open Access Journals (Sweden)

    Wang Qingyu

    2016-01-01

    Full Text Available The effects of the composite coagulants on coagulation sedimentation for the preserved wastewater was investigated by changing the composite coagulant dosages, and the coagulant was composed of polymeric ferric sulfate (PFS, polyaluminium chloride (PAC, and polyaluminum ferric silicate (PAFSC, while the effect of the tertiary treatment process on the preserved wastewater was tested, which was exceeded the standard seriously. The results showed that 400 mg/L was the optimum composite coagulant dosage. The removal rates of salt and sugar were as high as 99.1% and 99.5% respectively, and the removal rates of CODCr and SS were 99.3% and 96.0%, respectively after the preserved wastewater was treated by the tertiary treatment technology, which both reached the primary standard of “The Integrated Wastewater Discharge Standard” (GB8978-1996.

  20. The Relationship of Amount of Resection and Time for Recovery of Bell’s Phenomenon after Levator Resection in Congenital Ptosis

    Science.gov (United States)

    Goel, Ruchi; Kishore, Divya; Nagpal, Smriti; Jain, Sparshi; Agarwal, Tushar

    2017-01-01

    Background: Recovery of Bell`s phenomenon after levator resection is unpredicatable. Delayed recovery can result in vision threatening corneal complications. Aim: To study the variability of Bell’s phenomenon and time taken for its recovery following levator resection for blepharoptosis and to correlate it with the amount of resection. Methods: A prospective observational study was conducted on 32 eyes of 32 patients diagnosed as unilateral simple congenital blepharoptosis who underwent levator resection at a tertiary care center between July 2013 and May 2015. Patients were followed up for 5 months and correction of ptosis, type of Bell`s, duration of Bell`s recovery and complications were noted. Results: The study group ranged from 16-25 years with 15:17 male: female ratio. There were 9 mild, 16 moderate and 7 severe ptosis. Satisfactory correction was achieved in all cases. Good Bell`s recovery occurred in 13 eyes on first post-op day, in 2-14 days in 19 eyes and 28 days in 1 eye. Inverse Bell`s was noted along with lid oedema and ecchymosis in 2 patients. Large resections (23-26mm) were associated with poor Bell`s on the first postoperative day (p=0.027, Fisher`s exact test). However, the duration required for recovery of Bell`s phenomenon did not show any significant difference with the amount of resection. (p=0.248, Mann Whitney test). Larger resections resulted in greater lagophthalmos (correlation=0.830, p<0.0001). Patients with recovery of Bell`s delayed for more than 7 days were associated with greater number of complications (p=0.001 Fisher`s Exact Test). Conclusion: Close monitoring for Bell`s recovery is required following levator resection. PMID:28584563

  1. Optimising Tertiary Student Accommodation within University Neighbourhoods

    OpenAIRE

    Ike, Nnenna; Baldwin, Claudia; Lathouras, Athena

    2017-01-01

    Tertiary students’ activities within neighbourhoods adjacent to universities engender positive and negative impacts that have consequences for neighbourhood sustainability. This might lead to studentification, a process that triggers physical, economic and socio-cultural transformation of university towns. Where non-student residents perceive negative impacts, it can lead to conflict and resentment towards the student population, mistrust between student and local resident groups and a decrea...

  2. Cognitive performance and aphasia recovery.

    Science.gov (United States)

    Fonseca, José; Raposo, Ana; Martins, Isabel Pavão

    2018-03-01

    Objectives This study assessed cognitive performance of subjects with aphasia during the acute stage of stroke and evaluated how such performance relates to recovery at 3 months. Materials & methods Patients with aphasia following a left hemisphere stroke were evaluated during the first (baseline) and the fourth-month post onset. Assessment comprised non-verbal tests of attention/processing speed (Symbol Search, Cancelation Task), executive functioning (Matrix Reasoning, Tower of Hanoi, Clock Drawing, Motor Initiative), semantic (Camel and Cactus Test), episodic and immediate memory (Memory for Faces Test, 5 Objects Memory Test, and Spatial Span. Recovery was measured by the Token Test score at 3 months. The impact of baseline performance on recovery was evaluated by logistic regression adjusting for age, education, severity of aphasia and the Alberta Stroke Program Early CT (ASPECT) score. Results Thirty-nine subjects (with a mean of 66.5 ± 10.6 years of age, 17 men) were included. Average baseline cognitive performance was within normal range in all tests except in memory tests (semantic, episodic and immediate memory) for which scores were ≤-1.5sd. Subjects with poor aphasia recovery (N = 27) were older and had fewer years of formal education but had identical ASPECT score compared to those with favorable recovery. Considering each test individually, the score obtained on the Matrix Reasoning test was the only one to predict aphasia recovery (Exp(B)=24.085 p = 0.038). Conclusions The Matrix Reasoning Test may contribute to predict aphasia recovery. Cognitive performance is a measure of network disruption but may also indicate the availability of recovery strategies.

  3. Recovery from schizophrenia and the recovery model.

    Science.gov (United States)

    Warner, Richard

    2009-07-01

    The recovery model refers to subjective experiences of optimism, empowerment and interpersonal support, and to a focus on collaborative treatment approaches, finding productive roles for user/consumers, peer support and reducing stigma. The model is influencing service development around the world. This review will assess whether optimism about outcome from serious mental illness and other tenets of the recovery model are borne out by recent research. Remission of symptoms has been precisely defined, but the definition of 'recovery' is a more diffuse concept that includes such factors as being productive and functioning independently. Recent research and a large, earlier body of data suggest that optimism about outcome from schizophrenia is justified. A substantial proportion of people with the illness will recover completely and many more will regain good social functioning. Outcome is better for people in the developing world. Mortality for people with schizophrenia is increasing but is lower in the developing world. Working appears to help people recover from schizophrenia, and recent advances in vocational rehabilitation have been shown to be effective in countries with differing economies and labor markets. A growing body of research supports the concept that empowerment is an important component of the recovery process. Key tenets of the recovery model - optimism about recovery from schizophrenia, the importance of access to employment and the value of empowerment of user/consumers in the recovery process - are supported by the scientific research. Attempts to reduce the internalized stigma of mental illness should enhance the recovery process.

  4. Recovery of oil from underground drill sites

    International Nuclear Information System (INIS)

    Streeter, W.S.; Hutchinson, T.S.; Ameri, S.; Wasson, J.A.; Aminian, K.

    1991-01-01

    This paper reports that a significant quantity of oil is left in reservoirs after conventional oil recovery techniques have been applied. In West Virginia and Pennsylvania alone, this oil has been estimated at over 4.5 billion barrels (0.72 billion m 3 ). Conventional recovery methods are already being used when applicable. But a new recovery method is needed for use in reservoirs that have been abandoned. One alternative method for recovery of the residual oil is known as oil recovery from underground drill sites. This recovery technology is a combination of proven methods and equipment from the petroleum, mining, and civil construction industries. Underground oil recovery can be an economically viable method of producing oil. This has been shown in producing fields, field tests, and feasibility, studies. Faced with decreasing domestic oil production, the petroleum industry should give serious consideration to the use of oil recovery from underground drill sites as a safe, practical, and environmentally sensitive alternative method of producing oil from many reservoirs

  5. Fluid diversion in oil recovery

    International Nuclear Information System (INIS)

    Nimir, Hassan B.

    1999-01-01

    In any oil recovery process, large scale heterogeneities, such as fractures, channels, or high-permeability streaks, can cause early break through of injected fluid which will reduce oil recovery efficiency. In waterflooding, enhanced oil recovery, and acidizing operations, this problem is particularly acute because of the cost of the injected fluid. On the other hand coping with excess water production is always a challenging task for field operators. The cost of handling and disposing produced water can significantly shorten the economic production life of an oil well. The hydrostatic pressure created by high fluid levels in a well (water coning) is also detrimental to oil production. In this paper, the concept of fluid diversion is explained. Different methods that are suggested to divert the fluid into the oil-bearing-zones are briefly discussed, to show their advantages and disadvantages. Methods of reducing water production in production well are also discussed. (Author)

  6. Tracheostomy in children: a ten-year experience from a tertiary center in southern Brazil,

    OpenAIRE

    Schweiger, Cláudia; Manica, Denise; Becker, Carolina Fischer; Abreu, Larissa Santos Perez; Manzini, Michelle; Sekine, Leo; Kuhl, Gabriel

    2017-01-01

    Abstract Introduction: Children may require tracheostomy due to many different health conditions. Over the last 40 years, indications of tracheostomy have endorsed substantial modifications. Objective: To evaluate pediatric patients warranted tracheostomy at our Hospital, in regard to their indications, associated comorbidities, complications and decannulation rates. Methods: Retrospective study concerning patients under 18 years of age undergoing tracheostomy in a tertiary health care cen...

  7. Prevalence of obesity among diabetics seen in a tertiary health care ...

    African Journals Online (AJOL)

    Background: Obesity is a leading determinant for diabetes mellitus. The objective of this study was to assess the prevalence of overweight/obesity among diabetic patients seen at a tertiary hospital in South-South Nigeria. Methods: A retrospective study of 244 diabetic patients seen between January 2010 and June 2012.

  8. The profile of meningitis in a tertiary paediatric hospital in South Africa

    African Journals Online (AJOL)

    Background. Meningitis in children is a major health problem worldwide, leading to high rates of mortality and morbidity. Objectives. To describe the profile of patients treated for meningitis at a leading tertiary paediatric hospital (Red Cross War Memorial Children's Hospital) in South Africa. Methods. This study describes all ...

  9. The Simple Analysis on Motivation and Attitude in Tertiary College Students' English Study

    Institute of Scientific and Technical Information of China (English)

    盛洁瑾

    2008-01-01

    In psycholinguisties,motivation and attitude have much effect on students'English study.Because there ale different individuals among students,different students have different study motivations and attitudes.Directed against these individuals in tertiary colleges,we formulate different methods to help students study English well.

  10. Maternal near miss and mortality in a tertiary care hospital in Rwanda

    NARCIS (Netherlands)

    Rulisa, S.; Umuziranenge, I.; Small, M; van Roosmalen, J.

    2015-01-01

    Background: To determine the prevalence and factors associated with severe ('near miss') maternal morbidity and mortality in the University Teaching Hospital of Kigali - Rwanda. Methods: We performed a cross sectional study of all women admitted to the tertiary care University Hospital in Kigali

  11. Culture of Safety among Nurses in a Tertiary Teaching Hospital in ...

    African Journals Online (AJOL)

    Purpose: To assess the culture of safety among nurses in a tertiary teaching hospital in Saudi Arabia. Methods: A cross-sectional survey was conducted in King Khaled University Hospital in Riyadh, Saudi Arabia. A random sample of 492 nurses was included in the survey using a pre-validated instrument, Safety Attitudes ...

  12. Utility of an intraoperabive gamma probe in the surgical management of secondary or tertiary hyperparathyroidism

    NARCIS (Netherlands)

    Jorna, Francisca H.; Jager, Pieter L.; Lemstra, Clara; Wiggers, Theo; Stegeman, Coen A.; Plukker, John T. M.

    BACKGROUND: In primary hyperparathyroidism the gamma probe is effective, but its role in secondary hyperparathyroidism is unclear. We investigated the utility of the probe in the surgical management of secondary and tertiary hyperparathyroidism. METHODS: The value of the probe in guiding resection

  13. Cervical pap smear- A prospective study in a tertiary hospital

    Directory of Open Access Journals (Sweden)

    S Pudasaini

    2015-09-01

    Full Text Available Background: Cervical cancer is a leading cause of mortality and morbidity among women worldwide and most common gynaecological cancer in developing countries. Papanicolaou smear is a simple and cost effective screening test for cervical cancer. The aim of this study is to evaluate and interpret the cervical pap smear cytology in a tertiary hospital. The interpretation and reporting of the pap smear is based on 2001Bethesda system.Materials and methods: This is a prospective study conducted in a tertiary hospital, Nepal Medical College over a period of two and a half years (January 2013 to June 2015. All cervical pap smears received in the department of Pathology in the study period were included.Results: A total of 4160 cervical pap smears were reported in the study period. Majority of the cases were Negative for Intraepithelial lesion or malignancy (87.9%. Bacterial vaginosis, atrophy and reactive cellular changes associated with inflammation were seen in 5.3%, 2.4% and 1.5% cases respectively.   Epithelial cell abnormalities (0.5% include Atypical squamous cells of undetermined significance, Low grade squamous intraepithelial lesion and High grade intraepithelial lesion. 88% of Low grade squamous intraepithelial lesion was seen in reproductive age group (20-45 years.Conclusion: Cervical cancer is the most common gynaecological cancer in the developing countries. Pap smear is the simple and cost effective screening tool to detect pre invasive cervical epithelial lesions.

  14. Reflections on entrepreneurship education in African tertiary institutions

    Directory of Open Access Journals (Sweden)

    K. Bawuah

    2006-12-01

    Full Text Available It is a well-established fact that several developed economies grew on the back of small businesses and entrepreneurial development. It stands to reason then that the development of Sub-Saharan Africa (SSA can also be catalysed by a rise in the number of entrepreneurs and entrepreneurial activity. In that general regard, this paper sought to investigate the state of entrepreneurship education in Sub-Saharan Africa (SSA. The method adopted in investigating this phenomenon was to critique the existing tertiary education entrepreneurship structures (where these existed at all and to proffer recommendations where anomalies were discovered. It came to light that despite the critical importance of entrepreneurs in the economic development of a nation, Sub-Saharan African (SSA countries have not fully developed strategies to tap this resource. What the countries have, are haphazard policies designed to promote the lesser or uneducated individuals in the informal sector into entrepreneurship. SSA educational leaders must find ways to structure their curricula so that all or most of their students can take courses in entrepreneurship. This is essential for SSA countries in order to move them from their present disadvantaged economic status, to greater economic and social development. A tentative syllabus for African tertiary education is proffered at the end of the article but its robustness needs to be tested.

  15. Beyond Bushfires: Community, Resilience and Recovery - a longitudinal mixed method study of the medium to long term impacts of bushfires on mental health and social connectedness.

    Science.gov (United States)

    Gibbs, Lisa; Waters, Elizabeth; Bryant, Richard A; Pattison, Philippa; Lusher, Dean; Harms, Louise; Richardson, John; MacDougall, Colin; Block, Karen; Snowdon, Elyse; Gallagher, Hugh Colin; Sinnott, Vikki; Ireton, Greg; Forbes, David

    2013-11-04

    Natural disasters represent an increasing threat both in terms of incidence and severity as a result of climate change. Although much is known about individual responses to disasters, much less is known about the social and contextual response and how this interacts with individual trajectories in terms of mental health, wellbeing and social connectedness. The 2009 bushfires in Victoria, Australia caused much loss of life, property destruction, and community disturbance. In order to progress future preparedness, response and recovery, it is crucial to measure and understand the impact of disasters at both individual and community levels. This study aims to profile the range of mental health, wellbeing and social impacts of the Victorian 2009 bushfires over time using multiple methodologies and involving multiple community partners. A diversity of communities including bushfire affected and unaffected will be involved in the study and will include current and former residents (at the time of the Feb 2009 fires). Participants will be surveyed in 2012, 2014 and, funding permitting, in 2016 to map the predictors and outcomes of mental health, wellbeing and social functioning. Ongoing community visits, as well as interviews and focus group discussions in 2013 and 2014, will provide both contextual information and evidence of changing individual and community experiences in the medium to long term post disaster. The study will include adults, adolescents and children over the age of 5. Conducting the study over five years and focussing on the role of social networks will provide new insights into the interplay between individual and community factors and their influence on recovery from natural disaster over time. The study findings will thereby expand understanding of long term disaster recovery needs for individuals and communities.

  16. Heart Attack Recovery FAQs

    Science.gov (United States)

    ... recommendations to make a full recovery. View an animation of a heart attack . Heart Attack Recovery Questions ... Support Network Popular Articles 1 Understanding Blood Pressure Readings 2 Sodium and Salt 3 Heart Attack Symptoms ...

  17. Water Recovery Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Water Recovery Project (WRP) is advancing environmental control and life support systems water recovery technologies to support human exploration beyond low...

  18. EPA Recovery Mapper

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Recovery Mapper is an Internet interactive mapping application that allows users to discover information about every American Recovery and Reinvestment Act...

  19. Microbial enhanced heavy oil recovery by the aid of inhabitant spore-forming bacteria: an insight review.

    Science.gov (United States)

    Shibulal, Biji; Al-Bahry, Saif N; Al-Wahaibi, Yahya M; Elshafie, Abdulkader E; Al-Bemani, Ali S; Joshi, Sanket J

    2014-01-01

    Crude oil is the major source of energy worldwide being exploited as a source of economy, including Oman. As the price of crude oil increases and crude oil reserves collapse, exploitation of oil resources in mature reservoirs is essential for meeting future energy demands. As conventional recovery methods currently used have become less efficient for the needs, there is a continuous demand of developing a new technology which helps in the upgradation of heavy crude oil. Microbial enhanced oil recovery (MEOR) is an important tertiary oil recovery method which is cost-effective and eco-friendly technology to drive the residual oil trapped in the reservoirs. The potential of microorganisms to degrade heavy crude oil to reduce viscosity is considered to be very effective in MEOR. Earlier studies of MEOR (1950s) were based on three broad areas: injection, dispersion, and propagation of microorganisms in petroleum reservoirs; selective degradation of oil components to improve flow characteristics; and production of metabolites by microorganisms and their effects. Since thermophilic spore-forming bacteria can thrive in very extreme conditions in oil reservoirs, they are the most suitable organisms for the purpose. This paper contains the review of work done with thermophilic spore-forming bacteria by different researchers.

  20. Microbial Enhanced Heavy Oil Recovery by the Aid of Inhabitant Spore-Forming Bacteria: An Insight Review

    Directory of Open Access Journals (Sweden)

    Biji Shibulal

    2014-01-01

    Full Text Available Crude oil is the major source of energy worldwide being exploited as a source of economy, including Oman. As the price of crude oil increases and crude oil reserves collapse, exploitation of oil resources in mature reservoirs is essential for meeting future energy demands. As conventional recovery methods currently used have become less efficient for the needs, there is a continuous demand of developing a new technology which helps in the upgradation of heavy crude oil. Microbial enhanced oil recovery (MEOR is an important tertiary oil recovery method which is cost-effective and eco-friendly technology to drive the residual oil trapped in the reservoirs. The potential of microorganisms to degrade heavy crude oil to reduce viscosity is considered to be very effective in MEOR. Earlier studies of MEOR (1950s were based on three broad areas: injection, dispersion, and propagation of microorganisms in petroleum reservoirs; selective degradation of oil components to improve flow characteristics; and production of metabolites by microorganisms and their effects. Since thermophilic spore-forming bacteria can thrive in very extreme conditions in oil reservoirs, they are the most suitable organisms for the purpose. This paper contains the review of work done with thermophilic spore-forming bacteria by different researchers.

  1. Determination of traces of thorium in ammonium/sodium diuranate by ICP-AES method

    International Nuclear Information System (INIS)

    Nair, V.R.; Kartha, K.N.M.

    1999-01-01

    Full text: Indian Rare Earths Ltd., Alwaye, produces ammonium diuranate from the thorium concentrate, obtained during monazite processing. This process involves a series of steps. The final uranium product obtained always contains microgram amounts of thorium as impurity. An analytical procedure has been standardised for the estimation of microgram amounts of thorium in ammonium/sodium diuranate. The method involves solvent extraction of uranium by using a tertiary amine followed by the determination of thorium by ICP-AES method in the raffinate. The recoveries of thorium were checked by standard addition to the uranium matrix. Limit of detection is adequate for the analysis of nuclear grade material

  2. Relationship Between Magnitude of Applied Spin Recovery Moment and Ensuing Number of Recovery Turns

    Science.gov (United States)

    Anglin, Ernie L.

    1967-01-01

    An analytical study has been made to investigate the relationship between the magnitude of the applied spin recovery moment and the ensuing number of turns made during recovery from a developed spin with a view toward determining how to interpolate or extrapolate spin recovery results with regard to determining the amount of control required for a satisfactory recovery. Five configurations were used which are considered to be representative of modern airplanes: a delta-wing fighter, a stub-wing research vehicle, a boostglide configuration, a supersonic trainer, and a sweptback-wing fighter. The results obtained indicate that there is a direct relationship between the magnitude of the applied spin recovery moments and the ensuing number of recovery turns made and that this relationship can be expressed in either simple multiplicative or exponential form. Either type of relationship was adequate for interpolating or extrapolating to predict turns required for recovery with satisfactory accuracy for configurations having relatively steady recovery motions. Any two recoveries from the same developed spin condition can be used as a basis for the predicted results provided these recoveries are obtained with the same ratio of recovery control deflections. No such predictive method can be expected to give satisfactory results for oscillatory recoveries.

  3. Recovery from mental illness

    DEFF Research Database (Denmark)

    Petersen, Kirsten Schultz; Friis, Vivi Soegaard; Haxholm, Birthe Lodahl

    2015-01-01

    Mental health services strive to implement a recovery-oriented approach to rehabilitation. Little is known about service users' perception of the recovery approach. The aim is to explore the service user's perspectives on facilitators and barriers associated with recovery. Twelve residents living...

  4. Improving sample recovery

    International Nuclear Information System (INIS)

    Blanchard, R.J.

    1995-09-01

    This Engineering Task Plan (ETP) describes the tasks, i.e., tests, studies, external support and modifications planned to increase the recovery of the recovery of the waste tank contents using combinations of improved techniques, equipment, knowledge, experience and testing to better the recovery rates presently being experienced

  5. Study on tritium recovery from breeder materials

    International Nuclear Information System (INIS)

    Moriyama, H.; Moritani, K.

    1997-01-01

    For the development of fusion reactor blanket systems, some of the key issues on the tritium recovery performance of solid and liquid breeder materials were studied. In the case of solid breeder materials, a special attention was focussed on the effects of irradiation on the tritium recovery performance, and tritium release experiments, luminescence measurements of irradiation defects and modeling studies were systematically performed. For liquid breeder materials, tritium recovery experiments from molten salt and liquid lithium were performed, and the technical feasibility of tritium recovery methods was discussed. (author)

  6. Combustion for Enhanced Recovery of Light Oil at Medium Pressures

    NARCIS (Netherlands)

    Khoshnevis Gargar, N.

    2014-01-01

    Using conventional production methods, recovery percentages from oil reservoirs range from 5% for difficult oil to 50% for light oil in highly permeable homogeneous reservoirs. To increase the oil recovery factor, enhanced oil recovery (EOR) methods are used. We distinguish EOR that uses chemical

  7. Emotional inertia and external events: The roles of exposure, reactivity, and recovery.

    Science.gov (United States)

    Koval, Peter; Brose, Annette; Pe, Madeline L; Houben, Marlies; Erbas, Yasemin; Champagne, Dominique; Kuppens, Peter

    2015-10-01

    Increased moment-to-moment predictability, or inertia, of negative affect has been identified as an important dynamic marker of psychological maladjustment, and increased vulnerability to depression in particular. However, little is known about the processes underlying emotional inertia. The current article examines how the emotional context, and people's responses to it, are related to emotional inertia. We investigated how individual differences in the inertia of negative affect (NA) are related to individual differences in exposure, reactivity, and recovery from emotional events, in daily life (assessed using experience sampling) as well as in the lab (assessed using an emotional film-clip task), among 200 participants commencing their first year of tertiary education. This dual-method approach allowed us to assess affective responding on different timescales, and in response to standardized as well as idiographic emotional stimuli. Our most consistent finding, across both methods, was that heightened NA inertia is related to decreased NA recovery following negative stimuli, suggesting that higher levels of inertia may be mostly driven by impairments in affect repair following negative events. (c) 2015 APA, all rights reserved).

  8. Characterization of molybdenum interfacial crud in a uranium mill that employs tertiary-amine solvent extraction

    International Nuclear Information System (INIS)

    Moyer, B.; McDowell, W.J.

    1983-01-01

    In the present work, samples of a molybdenum-caused green gummy interfacial crud from an operating western US uranium mill have been physically and chemically examined. Formaton of cruds of this description has been a long-standing problem in the use of tertiary amine solvent extraction for the recovery of uranium from low-grade ores (Amex Process). The crud is essentially an organic-continuous dispersion containing about 10 wt % aqueous droplets and about 37 wt % greenish-yellow crystalline solids suspended in kerosene-amine process solvent. The greenish-yellow crystals were found to be a previously unknown double salt of tertiary amine molybdophosphate with three tertiary amine chlorides having the empirical formula (R 3 NH) 3 [PMo 12 O 40 ].3(R 3 NH)Cl. To confirm the identification of the compound, a pure trioctylamine (TOA) analog was synthesized. In laboratory extraction experiments, it was demonstrated that organic-soluble amine molydophosphate forms slowly upon contact of TOA solvent with dilute sulfuric acid solutions containing low concentrations of molybdate and phosphate. If the organic solutions of amine molybdophosphate were then contacted with aqueous NaCl solutions, a greenish-yellow precipitate of (TOAH) 3 [PMo 12 O 40 ].3(TOAH)Cl formed at the interface. The proposed mechanism for the formation of the crud under process conditions involves build up of molybdenum in the solvent, followed by reaction with extracted phosphate to give dissolved amine molybdophosphate. The amine molybdophosphate then co-crystallizes with amine chloride, formed during the stripping cycle, to give the insoluble double salt, which precipitates as a layer of small particles at the interface. The proposed solution to the problem is the use of branched-chain, instead of straight-chain, tertiary amine extractants under the expectation that branching would increase the solubility of the double salt. 2 figures, 5 tables

  9. Recovery from Psychosis: A Phenomenological Inquiry

    Science.gov (United States)

    Nixon, Gary; Hagen, Brad; Peters, Tracey

    2010-01-01

    While mainstream psychiatry tends to view psychosis as an enduring and chronic condition, there is growing interest in the possibility of recovery from psychosis. A phenomenological research method was utilized in interviewing 17 individuals who all self-identified as being in recovery from psychosis. The research question was, "What was the lived…

  10. Uranium recovery from AVLIS slag

    International Nuclear Information System (INIS)

    D'Agostino, A.E.; Mycroft, J.R.; Oliver, A.J.; Schneider, P.G.; Richardson, K.L.

    2000-01-01

    Uranium metal for the Atomic Vapor Laser Isotope Separation (AVLIS) project was to have been produced by the magnesiothermic reduction of uranium tetrafluoride. The other product from this reaction is a magnesium fluoride slag, which contains fine and entrained natural uranium as metal and oxide. Recovery of the uranium through conventional mill leaching would not give a magnesium residue free of uranium but to achieve more complete uranium recovery requires the destruction of the magnesium fluoride matrix and liberation of the entrapped uranium. Alternate methods of carrying out such treatments and the potential for recovery of other valuable byproducts were examined. Based on the process flowsheets, a number of economic assessments were performed, conclusions were drawn and the preferred processing alternatives were identified. (author)

  11. Carbon dioxide enhanced oil recovery performance according to the literature

    Science.gov (United States)

    Olea, Ricardo A.

    2017-07-17

    IntroductionThe need to increase the efficiency of oil recovery and environmental concerns are bringing to prominence the use of carbon dioxide (CO2) as a tertiary recovery agent. Assessment of the impact of flooding with CO2 all eligible reservoirs in the United States not yet undergoing enhanced oil recovery (EOR) requires making the best possible use of the experience gained in 40 years of applications. Review of the publicly available literature has located relevant CO2-EOR information for 53 units (fields, reservoirs, pilot areas) in the United States and 17 abroad.As the world simultaneously faces an increasing concentration of CO2 in the atmosphere and a higher demand for fossil fuels, the CO2-EOR process continues to gain popularity for its efficiency as a tertiary recovery agent and for the potential for having some CO2 trapped in the subsurface as an unintended consequence of the enhanced production (Advanced Resources International and Melzer Consulting, 2009). More extensive application of CO2-EOR worldwide, however, is not making it significantly easier to predict the exact outcome of the CO2 flooding in new reservoirs. The standard approach to examine and manage risks is to analyze the intended target by conducting laboratory work, running simulation models, and, finally, gaining field experience with a pilot test. This approach, though, is not always possible. For example, assessment of the potential of CO2-EOR at the national level in a vast country such as the United States requires making forecasts based on information already available.Although many studies are proprietary, the published literature has provided reviews of CO2-EOR projects. Yet, there is always interest in updating reports and analyzing the information under new perspectives. Brock and Bryan (1989) described results obtained during the earlier days of CO2-EOR from 1972 to 1987. Most of the recovery predictions, however, were based on intended injections of 30 percent the size of

  12. Chemical Method to Improve CO{sub 2} Flooding Sweep Efficiency for Oil Recovery Using SPI-CO{sub 2} Gels

    Energy Technology Data Exchange (ETDEWEB)

    Burns, Lyle D.

    2009-04-14

    hydrocarbon combustion for energy, chemical and fertilizer plants. For example, coal fired power plants emit large amounts of CO{sub 2} in order to produce electrical energy. Carbon dioxide sequestration is gaining attention as concerns mount over possible global climate change caused by rising emissions of greenhouse gases. Removing the CO{sub 2} from the energy generation process would make these plants more environmentally friendly. In addition, CO{sub 2} flooding is an attractive means to enhance oil and natural gas recovery. Capture and use of the CO{sub 2} from these plants for recycling into CO{sub 2} flooding of marginal reservoirs provides a “dual use” opportunity prior to final CO{sub 2} sequestration in the depleted reservoir. Under the right pressure, temperature and oil composition conditions, CO{sub 2} can act as a solvent, cleaning oil trapped in the microscopic pores of the reservoir rock. This miscible process greatly increases the recovery of crude oil from a reservoir compared to recovery normally seen by waterflooding. An Enhanced Oil Recovery (EOR) project that uses an industrial source of CO{sub 2} that otherwise would be vented to the atmosphere has the added environmental benefit of sequestering the greenhouse gas.

  13. managing tertiary institutions for the promotion of lifelong learning

    African Journals Online (AJOL)

    Global Journal

    KEYWORDS: Managing, tertiary institutions, promotion, lifelong learning. INTRODUCTION ... science, medicine and technology towards the ... different environments, whether formal, informal ... schools considering that each day gives birth to.

  14. The administration of intermittent parathyroid hormone affects functional recovery from trochanteric fractured neck of femur: a randomised prospective mixed method pilot study.

    Science.gov (United States)

    Chesser, T J S; Fox, R; Harding, K; Halliday, R; Barnfield, S; Willett, K; Lamb, S; Yau, C; Javaid, M K; Gray, A C; Young, J; Taylor, H; Shah, K; Greenwood, R

    2016-06-01

    We wished to assess the feasibility of a future randomised controlled trial of parathyroid hormone (PTH) supplements to aid healing of trochanteric fractures of the hip, by an open label prospective feasibility and pilot study with a nested qualitative sub study. This aimed to inform the design of a future powered study comparing the functional recovery after trochanteric hip fracture in patients undergoing standard care, versus those who undergo administration of subcutaneous injection of PTH for six weeks. We undertook a pilot study comparing the functional recovery after trochanteric hip fracture in patients 60 years or older, admitted with a trochanteric hip fracture, and potentially eligible to be randomised to either standard care or the administration of subcutaneous PTH for six weeks. Our desired outcomes were functional testing and measures to assess the feasibility and acceptability of the study. A total of 724 patients were screened, of whom 143 (20%) were eligible for recruitment. Of these, 123 were approached and 29 (4%) elected to take part. However, seven patients did not complete the study. Compliance with the injections was 11 out of 15 (73%) showing the intervention to be acceptable and feasible in this patient population. Only 4% of patients who met the inclusion criteria were both eligible and willing to consent to a study involving injections of PTH, so delivering this study on a large scale would carry challenges in recruitment and retention. Methodological and sample size planning would have to take this into account. PTH administration to patients to enhance fracture healing should still be considered experimental. Cite this article: Bone Joint J 2016;98-B:840-5. ©2016 Chesser et al.

  15. Battleground Energy Recovery Project

    Energy Technology Data Exchange (ETDEWEB)

    Bullock, Daniel [USDOE Gulf Coast Clean Energy Application Center, Woodlands, TX (United States)

    2011-12-31

    In October 2009, the project partners began a 36-month effort to develop an innovative, commercial-scale demonstration project incorporating state-of-the-art waste heat recovery technology at Clean Harbors, Inc., a large hazardous waste incinerator site located in Deer Park, Texas. With financial support provided by the U.S. Department of Energy, the Battleground Energy Recovery Project was launched to advance waste heat recovery solutions into the hazardous waste incineration market, an area that has seen little adoption of heat recovery in the United States. The goal of the project was to accelerate the use of energy-efficient, waste heat recovery technology as an alternative means to produce steam for industrial processes. The project had three main engineering and business objectives: Prove Feasibility of Waste Heat Recovery Technology at a Hazardous Waste Incinerator Complex; Provide Low-cost Steam to a Major Polypropylene Plant Using Waste Heat; and Create a Showcase Waste Heat Recovery Demonstration Project.

  16. Tertiary proton diagnostics in future inertial confinement fusion experiments

    International Nuclear Information System (INIS)

    Cremer, S.; Verdon, C.P.; Petrasso, R.D.

    1998-01-01

    Recently, it was proposed to use energetic (up to 31 MeV) tertiary protons produced during the final stage of inertial confinement fusion implosions to measure the fuel areal density of compressed deuterium endash tritium (DT). The method is based on seeding the fuel with 3 He. The reaction of 3 He ions with the energetic knock-on deuterons, produced via the elastic scattering of 14.1 MeV neutrons, is a source of very energetic protons capable of escaping from very large areal density targets. This work presents results of detailed time-dependent Monte Carlo simulations of the nuclear processes involved in producing and transporting these protons through imploding targets proposed for direct-drive experiments on OMEGA [D. K. Bradley et al., Phys. Plasmas 5, 1870 (1998)] and the National Ignition Facility [S. W. Haan et al., Phys. Plasmas 2, 2480 (1995)]. copyright 1998 American Institute of Physics

  17. Assessment of pediatric residents burnout in a tertiary academic centre

    Directory of Open Access Journals (Sweden)

    Roaa S. Jamjoom

    2018-03-01

    Full Text Available Objectives: To study burnout among pediatric residents at King Abdulazaiz University Hospital in Jeddah, Saudi Arabia. Methods: This is a cross-sectional survey that was administered to all pediatric residents enrolled in the Saudi Paediatric Board program (PGY1-PGY4 in a large tertiary academic hospital in the Western region of Saudi Arabia (King Abdulaziz University Hospital. The survey were sent via E-mail to 50 registered general pediatric residents. Results: Seventy percent of the pediatric residents completed the survey. More than 70% of residents experiencing severe burnout. Forty-three percent suffering emotional exhaustion, 71.8% experiencing depersonalization and 40.6% suffering from low accomplishment. Conclusion: Burnout syndrome appear to be a serious threat to resident well-being in our program. Moreover, pediatric residents in our institute experienced higher levels of depersonalization than their peers nationally and internationally.

  18. Speech recovery device

    Energy Technology Data Exchange (ETDEWEB)

    Frankle, Christen M.

    2004-04-20

    There is provided an apparatus and method for assisting speech recovery in people with inability to speak due to aphasia, apraxia or another condition with similar effect. A hollow, rigid, thin-walled tube with semi-circular or semi-elliptical cut out shapes at each open end is positioned such that one end mates with the throat/voice box area of the neck of the assistor and the other end mates with the throat/voice box area of the assisted. The speaking person (assistor) makes sounds that produce standing wave vibrations at the same frequency in the vocal cords of the assisted person. Driving the assisted person's vocal cords with the assisted person being able to hear the correct tone enables the assisted person to speak by simply amplifying the vibration of membranes in their throat.

  19. Speech recovery device

    Energy Technology Data Exchange (ETDEWEB)

    Frankle, Christen M.

    2000-10-19

    There is provided an apparatus and method for assisting speech recovery in people with inability to speak due to aphasia, apraxia or another condition with similar effect. A hollow, rigid, thin-walled tube with semi-circular or semi-elliptical cut out shapes at each open end is positioned such that one end mates with the throat/voice box area of the neck of the assistor and the other end mates with the throat/voice box area of the assisted. The speaking person (assistor) makes sounds that produce standing wave vibrations at the same frequency in the vocal cords of the assisted person. Driving the assisted person's vocal cords with the assisted person being able to hear the correct tone enables the assisted person to speak by simply amplifying the vibration of membranes in their throat.

  20. Integrating multi-disciplinary field and laboratory methods to investigate the response and recovery of beach-dune systems in Ireland to extreme events

    Science.gov (United States)

    Farrell, E.; Lynch, K.; Wilkes Orozco, S.; Castro Camba, G.; Scullion, A.

    2017-12-01

    This two year field monitoring project examines the response and recovery of 1.2km of a coastal beach-dune system in the west coast of Ireland (The Maharees, Brandon Bay, Co. Kerry) to storms. The results from this project initiated a larger scale study to assess the long term evolution of Brandon Bay (12km) and patterns of meso-scale rotation. On a bay scale historic shoreline analyses were completed using historic Ordnance Survey maps, aerial photography, and DGPS surveys inputted to the Digital Shoreline Analysis System. These were coupled with a GSTA-wavemeter experiment that collected 410 sediment samples along the beach and nearshore to identify preferred sediment transport pathways along the bay. On a local scale (1.2km) geomorphological changes of the beach and nearshore were monitored using repeated monthly DGPS surveys and drone technology. Topographical data were correlated with atmospheric data obtained from a locally installed automatic weather station, oceanographic data from secondary sources, and photogrammetry using a camera installed at the site collecting pictures every 10 minutes during daylight hours. Changes in surface elevation landward of the foredune from aeolian processes were measured using five pin transects across the dune. The contribution of local blowout dynamics were measured using drone imagery and structure-from-motion technology. The results establish that the average shoreline recession along the 1.2 km site is 72 m during the past 115 years. The topographic surveys illustrate that natural beach building processes initiate system recovery post storms including elevated foreshores and backshores and nearshore sand bar migration across the entire 1.2 km stretch of coastline. In parallel with the scientific work, the local community have mobilized and are working closely with the lead scientists to implement short term coastal management strategies such as signage, information booklets, sand trap fencing, walkways, wooden

  1. Recovery of uranium contained in phosphoric acid by a wet method and its transformation in a high-purity uraniferous concentrates

    International Nuclear Information System (INIS)

    Davister, A.; Dubreucq, A.; Granville, G.; Gray, H.

    1984-01-01

    There are altogether three plants in active operation today for the recovery of uranium contained in the phosphoric acid, two in the USA and one in Prayon in Belgium. All three utilize the same solvant, i.e. the Depa-Topo mixture. The Prayon plant was started up in May 1980. Phosphoric acid is desaturated before the extraction for a long time at a low temperature, totally free from mineral and organic solids and rid of its soluble humic matter until a clear acid of very low optical density is obtained. During the re-extraction of the first cycle, the reduction of U 6+ into U 4+ is effected by metallic iron, according to an original patented process which permits the reduction of the introduced iron to a strict minimum. At the end of the second cycle, an original technique permits the precipitation of a uranium and ammonium hydroxide, starting from the aqueous phase, first separated from the organic phase and purified as regards iron; because of this, the concentrate requires no roasting [fr

  2. Recovery process of cathode material of the spent lithium-ion batteries using Pechini methods; Reprocessamento de catodos de baterias de ions litio descartadas utilizando sintese Pechini

    Energy Technology Data Exchange (ETDEWEB)

    Polo Fonseca, C.; Prado, R.M.; Santos Junior, G.A.; Marques, E.C.; Neves, S., E-mail: carla.polo@yahoo.com.b [Universidade Sao Francisco (LCAM/USF), Itatiba, SP (Brazil). Lab. de Caracterizacao e Aplicacao de Materiais; Amaral, F. [Universidade Federal de Uberlandia (UFU), MG (Brazil)

    2010-07-01

    This work proposes a new process of recovering LiCoO{sub 2} from spent Li-ion batteries (LIBs) by a combination of acid leaching and Pechini synthesis, as an alternative process to improve the recovery efficiency of LiCoO{sub 2} and reduce energy consumption and pollution. The effects of calcination temperature and lithium acetate addition in the synthesis on the structure and morphology of LiCoO{sub 2} powders were characterized by X-ray diffraction, Raman spectroscopy and scanning electron microscopy. According to the analysis, the crystallinity of LiCoO{sub 2} powders depends on the calcination temperature. The results indicate the layered HT-LiCoO{sub 2} powders can be obtained at 750 deg C for 24 h in oxygen with lithium salt addition. Cyclic voltammograms showed one reversible redox process at 4.0/3.85 V for the LiCoO{sub 2} obtained with lithium addition in the synthesis and irreversible redox process for the LiCoO{sub 2} obtained without lithium addition. (author)

  3. Recovery and money management.

    Science.gov (United States)

    Rowe, Michael; Serowik, Kristin L; Ablondi, Karen; Wilber, Charles; Rosen, Marc I

    2013-06-01

    Social recovery and external money management are important approaches in contemporary mental health care, but little research has been done on the relationship between the two or on application of recovery principles to money management for people at risk of being assigned a representative payee or conservator. Out of 49 total qualitative interviews, 25 transcripts with persons receiving Social Security insurance or Social Security disability insurance who were at risk of being assigned a money manager were analyzed to assess the presence of recognized recovery themes. The recovery principles of self-direction and responsibility were strong themes in participant comments related to money management. Money management interventions should incorporate peoples' recovery-related motivations to acquire financial management skills as a means to direct and assume responsibility for one's finances. Staff involved in money management should receive training to support client's recovery-related goals. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  4. Evaluation of the onset of tertiary creep for types 304 and 316 stainless steels

    International Nuclear Information System (INIS)

    Staerk, E.; Picker, C.; Felsen, M.F.

    1989-01-01

    Austenitic stainless steels Types 304 and 316 are used for LMFBR components. Although at high temperature many codes base the allowable stress on the stress rupture strength, some recent codes eg ASME Code Case N47 and RCC-MR also take account of the onset of tertiary creep. In order to examine this latter aspect creep deformation data on Type 304 and Type 316 steel have been collected and analysed. The ratio time to onset of tertiary creep against the time to rupture has been analysed as a function of temperature. At temperatures below 750 0 C the ratio is found to decrease slightly with increasing temperature. Monkman Grant and Lambda relationships have also been investigated. In relation to the ASME S t allowable stress criteria it is shown that below 600 0 C the allowable stress is likely to be governed by the stress rupture strength rather than the onset of tertiary creep criterion. Recommendations are given concerning the determination of the onset of tertiary creep, the fitting of the Leyda/Rowe relationship and a method to compute the maximum allowable stress S t from equation describing the time-temperature dependency of the three constituents of S t

  5. Determinants of propensity of tertiary agricultural students in Ghana ...

    African Journals Online (AJOL)

    The study aimed to identify factors that affect the decision of tertiary agricultural students in Ghana to enter agribusiness as a self-employment venture after graduation. The results showed that tertiary agricultural students in Ghana were predominantly males with little or no farming background. They had a rather moderate ...

  6. Crime and Crime Management in Nigeria Tertiary Institutions

    Science.gov (United States)

    Adebanjo, Margaret Adewunmi

    2014-01-01

    This paper examines crime and its management in Nigerian tertiary institutions. Tertiary institutions today have become arenas for crime activities such as rape, cultism, murder, theft, internet fraud, drug abuse, and examination malpractices. This paper delves into what crime is, and its causes; and the positions of the law on crime management.…

  7. Massification and Quality Assurance in Tertiary Education: The ...

    African Journals Online (AJOL)

    The study sets out to examine massification and its impact on quality assurance in tertiary education and the extent to which lecturer–student ratio, adequacy of infrastructure and pedagogical resources affect quality in tertiary institutions. Two research questions and one hypothesis were posed to guide the investigation.

  8. Pushing the frontiers of atomic models for protein tertiary structure ...

    Indian Academy of Sciences (India)

    as an NP complete or NP hard problem.4,5 This notwith- standing, the dire need for tertiary structures of proteins in drug discovery and other areas6–8 has propelled the development of a multitude of computational recipes. In this article, we focus on ab initio/de novo strategies,. Bhageerath in particular, for protein tertiary ...

  9. Academic mentoring and the future of tertiary education in Nigeria ...

    African Journals Online (AJOL)

    Tertiary education is a major outlet for the provision of high manpower for national development. This paper therefore highlighted the challenges of tertiary education in Nigeria, early perspectives of mentoring undergraduates, the rationale for academic mentoring, the role of a mentor, and the role of library as catalyst in the ...

  10. 10 CFR 212.78 - Tertiary incentive crude oil.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Tertiary incentive crude oil. 212.78 Section 212.78 Energy DEPARTMENT OF ENERGY OIL MANDATORY PETROLEUM PRICE REGULATIONS Producers of Crude Oil § 212.78 Tertiary incentive crude oil. Annual prepaid expenses report. By January 31 of each year after 1980, the project...

  11. Literacy Skills Development for Tertiary Institutions: A Case Study of ...

    African Journals Online (AJOL)

    Literacy Skills Development for Tertiary Institutions: A Case Study of the University of Calabar. ... These were drawn from five faculties, namely Education, Social Sciences, Law, Arts and Agriculture. The study observed that there is a ... more literacy skills. Key Words: Literacy skills, university, Nigeria, tertiary institution ...

  12. The Implementation of E1 Clock Recovery

    Directory of Open Access Journals (Sweden)

    Wang Ziyu

    2016-01-01

    Full Text Available Clock transform and recovery is of significant importance in microwave TDM service, and it is always extracted from the E1 line data stream in most cases. However, intrinsically uncertain delay and jitter caused by packet transmission of E1 data information, may lead to the indexes of the data recovery clock exceed the clock performance template. Through analysis of the E1 clock indexes and measuring methods, this paper proposes a new clock recovery method. The method employs two buffers, the first RAM is used as a buffer to deduct excess information, and the second FIFO is used as a buffer to recovery the clock and data. The first buffer has a feedback from the second one, and is able to actively respond to changes in the data link and requests from the second one. The test results validate the effectiveness of the method, and the corresponding scheme is also valuable for the other communication systems.

  13. Exploitation study of the ore-body ''Tigre III''. Open-cut design and study of high-recovery underground mining method for the Tigre III ore-body

    International Nuclear Information System (INIS)

    Baluszka, J.C.

    1980-01-01

    The paper first carries out an analysis for the purpose of determining the limiting sterile/ore ratio for open-cut and underground mining in the specific filling case of Tigre III. In this connection it considers a high-recovery method of underground mining (involving the use of cemented hydropneumatic chambers), a general mine plan covering access, transport, ventilation and removal of ore as well as auxiliary services relating to the Tigre III ore body as a whole. The costs of this method of mining are determined for purposes of comparison with the open-cut method. Similarly, the limiting sterile/ore ratio is taken as the basis for an analysis of different types of pit and a design suited to the limiting ratio is adopted. As a final solution the paper favours a method which combines open-cut and underground mining. It proposes the use of the open-cut method up to the limiting ratio (in accordance with the pit design chosen) and of underground method (by the filling chamber method) for the rest of the area. (author)

  14. Tertiary alphabet for the observable protein structural universe.

    Science.gov (United States)

    Mackenzie, Craig O; Zhou, Jianfu; Grigoryan, Gevorg

    2016-11-22

    Here, we systematically decompose the known protein structural universe into its basic elements, which we dub tertiary structural motifs (TERMs). A TERM is a compact backbone fragment that captures the secondary, tertiary, and quaternary environments around a given residue, comprising one or more disjoint segments (three on average). We seek the set of universal TERMs that capture all structure in the Protein Data Bank (PDB), finding remarkable degeneracy. Only ∼600 TERMs are sufficient to describe 50% of the PDB at sub-Angstrom resolution. However, more rare geometries also exist, and the overall structural coverage grows logarithmically with the number of TERMs. We go on to show that universal TERMs provide an effective mapping between sequence and structure. We demonstrate that TERM-based statistics alone are sufficient to recapitulate close-to-native sequences given either NMR or X-ray backbones. Furthermore, sequence variability predicted from TERM data agrees closely with evolutionary variation. Finally, locations of TERMs in protein chains can be predicted from sequence alone based on sequence signatures emergent from TERM instances in the PDB. For multisegment motifs, this method identifies spatially adjacent fragments that are not contiguous in sequence-a major bottleneck in structure prediction. Although all TERMs recur in diverse proteins, some appear specialized for certain functions, such as interface formation, metal coordination, or even water binding. Structural biology has benefited greatly from previously observed degeneracies in structure. The decomposition of the known structural universe into a finite set of compact TERMs offers exciting opportunities toward better understanding, design, and prediction of protein structure.

  15. Tertiary lymphoid structures in cancer and beyond.

    Science.gov (United States)

    Dieu-Nosjean, Marie-Caroline; Goc, Jérémy; Giraldo, Nicolas A; Sautès-Fridman, Catherine; Fridman, Wolf Herman

    2014-11-01

    Tertiary lymphoid structures (TLS) are ectopic lymphoid formations found in inflamed, infected, or tumoral tissues. They exhibit all the characteristics of structures in the lymph nodes (LN) associated with the generation of an adaptive immune response, including a T cell zone with mature dendritic cells (DC), a germinal center with follicular dendritic cells (FDC) and proliferating B cells, and high endothelial venules (HEV). In this review, we discuss evidence for the roles of TLS in chronic infection, autoimmunity, and cancer, and address the question of whether TLS present beneficial or deleterious effects in these contexts. We examine the relationship between TLS in tumors and patient prognosis, and discuss the potential role of TLS in building and/or maintaining local immune responses and how this understanding may guide therapeutic interventions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Navigating the global space of tertiary education:

    DEFF Research Database (Denmark)

    Wilken, Lisanne

    , and to the development of transnational elites. This is especially true for mobile students who attend “elite universities” in the USA, UK and France. As pointed out by sociologist Michael Börjesson (2005), an investment in an education at one of the American Ivy League universities or France’s Grand Ecoles, is not only......Over the past ten years the number of students who go abroad to pursue tertiary education has more than doubled, from 1, 9 million in 2000 to 4.1 million in 2010 (OECD 2012). This growing number of students studying abroad contributes to the overall flow of individuals and ideas across borders...... an investment in a significant educational capital with global applicability, but also an investment in an institutionalized transnational social capital that stretches across most of the world. It is less clear to what extent this also applies to students who go abroad to attend international programs...

  17. The use of continuous vs. intermittent cold water immersion as a recovery method in basketball players after training: a randomized controlled trial.

    Science.gov (United States)

    Sánchez-Ureña, Braulio; Martínez-Guardado, Ismael; Crespo, Carmen; Timón, Rafael; Calleja-González, Julio; Ibañez, Sergio J; Olcina, Guillermo

    2017-05-01

    The main objective of this study was to compare two cold water immersion protocols, continuous or intermittent, on recovery in basketball players. Ten male basketball players (age: 14 ± 0.4 years, body mass: 65.4 ± 9.1 kg, height: 175 ± 7.3 cm, body fat %: 10.3 ± 4) were included in the study. After three 90-minute training sessions (avg. heart rate 158 ± 11.92, 156 ± 7.06 and 151 ± 10.44 bpm), participants were grouped into a continuous immersion (12 min at 12 ± 0.4°C) group, intermittent immersion (4 x 2 min immersion at 12 ± 0.4 °C + 1 min out of water) group and a control group (CG). Countermovement jump (CMJ), muscle pain and thigh volume were measured. Both cold water immersion protocols were effective in reducing the pain 24 and 48 hours after training compared with the CG (F (3.54) = 2.91, p = 0.016, η p 2  = .24). Concerning CMJ change, % differences occurred at 24 (Z = 11.04, p = 0.004) and 48 hours (Z = 14.01, p basketball players.

  18. Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Dandina N. Rao; Subhash C. Ayirala; Madhav M. Kulkarni; Wagirin Ruiz Paidin; Thaer N. N. Mahmoud; Daryl S. Sequeira; Amit P. Sharma

    2006-09-30

    This is the final report describing the evolution of the project ''Development and Optimization of Gas-Assisted Gravity Drainage (GAGD) Process for Improved Light Oil Recovery'' from its conceptual stage in 2002 to the field implementation of the developed technology in 2006. This comprehensive report includes all the experimental research, models developments, analyses of results, salient conclusions and the technology transfer efforts. As planned in the original proposal, the project has been conducted in three separate and concurrent tasks: Task 1 involved a physical model study of the new GAGD process, Task 2 was aimed at further developing the vanishing interfacial tension (VIT) technique for gas-oil miscibility determination, and Task 3 was directed at determining multiphase gas-oil drainage and displacement characteristics in reservoir rocks at realistic pressures and temperatures. The project started with the task of recruiting well-qualified graduate research assistants. After collecting and reviewing the literature on different aspects of the project such gas injection EOR, gravity drainage, miscibility characterization, and gas-oil displacement characteristics in porous media, research plans were developed for the experimental work to be conducted under each of the three tasks. Based on the literature review and dimensional analysis, preliminary criteria were developed for the design of the partially-scaled physical model. Additionally, the need for a separate transparent model for visual observation and verification of the displacement and drainage behavior under gas-assisted gravity drainage was identified. Various materials and methods (ceramic porous material, Stucco, Portland cement, sintered glass beads) were attempted in order to fabricate a satisfactory visual model. In addition to proving the effectiveness of the GAGD process (through measured oil recoveries in the range of 65 to 87% IOIP), the visual models demonstrated

  19. SPECT imaging with resolution recovery

    International Nuclear Information System (INIS)

    Bronnikov, A. V.

    2011-01-01

    Single-photon emission computed tomography (SPECT) is a method of choice for imaging spatial distributions of radioisotopes. Many applications of this method are found in nuclear industry, medicine, and biomedical research. We study mathematical modeling of a micro-SPECT system by using a point-spread function (PSF) and implement an OSEM-based iterative algorithm for image reconstruction with resolution recovery. Unlike other known implementations of the OSEM algorithm, we apply en efficient computation scheme based on a useful approximation of the PSF, which ensures relatively fast computations. The proposed approach can be applied with the data acquired with any type of collimators, including parallel-beam fan-beam, cone-beam and pinhole collimators. Experimental results obtained with a micro SPECT system demonstrate high efficiency of resolution recovery. (authors)

  20. Peracetic acid (PAA) disinfection of primary, secondary and tertiary treated municipal wastewaters.

    Science.gov (United States)

    Koivunen, J; Heinonen-Tanski, H

    2005-11-01

    The efficiency of peracetic acid (PAA) disinfection against enteric bacteria and viruses in municipal wastewaters was studied in pilot-scale. Disinfection pilot-plant was fed with the primary or secondary effluent of Kuopio municipal wastewater treatment plant or tertiary effluent from the pilot-scale dissolved air flotation (DAF) unit. Disinfectant doses ranged from 2 to 7 mg/l PAA in the secondary and tertiary effluents, and from 5 to 15 mg/l PAA in the primary effluents. Disinfection contact times were 4-27 min. Disinfection of secondary and tertiary effluents with 2-7 mg/l PAA and 27 min contact time achieved around 3 log reductions of total coliforms (TC) and enterococci (EC). PAA disinfection also significantly improved the hygienic quality of the primary effluents: 10-15 mg/l PAA achieved 3-4 log reductions of TC and EC, 5 mg/l PAA resulting in below 2 log reductions. F-RNA coliphages were more resistant against the PAA disinfection and around 1 log reductions of these enteric viruses were typically achieved in the disinfection treatments of the primary, secondary and tertiary effluents. Most of the microbial reductions occurred during the first 4-18 min of contact time, depending on the PAA dose and microorganism. The PAA disinfection efficiency remained relatively constant in the secondary and tertiary effluents, despite of small changes of wastewater quality (COD, SS, turbidity, 253.7 nm transmittance) or temperature. The disinfection efficiency clearly decreased in the primary effluents with substantially higher microbial, organic matter and suspended solids concentrations. The results demonstrated that PAA could be a good alternative disinfection method for elimination of enteric microbes from different wastewaters.

  1. Illness management and recovery

    DEFF Research Database (Denmark)

    Dalum, Helle Stentoft; Waldemar, Anna Kristine; Korsbek, Lisa

    2018-01-01

    OBJECTIVE: Illness Management and Recovery (IMR) is a psychosocial intervention with a recovery-oriented approach. The program has been evaluated in different settings; however evidence for the effects of IMR is still deficient. The aim of this trial was to investigate the benefits and harms...

  2. Clinical evaluation of pulmonary perfusion MRI using FAIR (flow-sensitive alternating inversion recovery)-HASTE (Half-Fourier Single-Shot TurboSE) method

    International Nuclear Information System (INIS)

    Togami, Izumi; Sasai, Nobuya; Tsunoda, Masatoshi; Sei, Tetsurou; Sato, Shuhei; Yabuki, Takayuki; Hiraki, Yoshio

    2002-01-01

    The FAIR-HASTE method is a kind of noninvasive perfusion MR imaging obtained without the use of contrast media. By subtracting a flow-insensitive image from a flow-sensitive image, contrast enhancement of inflowing blood achieved. In the present study, we applied pulmonary perfusion FAIR-HASTE sequence for 23 patients with various pulmonary diseases, and compared the findings with those by pulmonary perfusion scintigraphy and Gadolinium perfusion MRI. Pulmonary perfusion imaging with the FAIR-HASTE method was possible in all clinical cases, and the findings corresponded well to those obtained by perfusion MRI using contrast media or pulmonary scintigraphy. The FAIR-HASTE method is a promising method for the evaluation of pulmonary perfusion. (author)

  3. Fine Formation During Brine-Crude Oil-Calcite Interaction in Smart Water Enhanced Oil Recovery for Caspian Carbonates

    DEFF Research Database (Denmark)

    Chakravarty, Krishna Hara; Fosbøl, Philip Loldrup; Thomsen, Kaj

    2015-01-01

    Modified sea water has been shown to affect the oil recovery fraction considerably during secondary and tertiary waterfloods. Available soluble potential ions (i.e. Ca2+, Mg2+ & SO42-) in the interacting waterflood (ITW) are suggested to play a key role in increasing the displacement efficiency...... of oil. In previous studies, compositions of injected waterfloods (IJW) have been correlated to the observed oil recovery. This study highlights differences between IJW and ITW for different studies reported in literature....

  4. Failure mechanism and supporting measures for large deformation of Tertiary deep soft rock

    Institute of Scientific and Technical Information of China (English)

    Guo Zhibiao; Wang Jiong; Zhang Yuelin

    2015-01-01

    The Shenbei mining area in China contains typical soft rock from the Tertiary Period. As mining depths increase, deep soft rock roadways are damaged by large deformations and constantly need to be repaired to meet safety requirements, which is a great security risk. In this study, the characteristics of deformation and failure of typical roadway were analyzed, and the fundamental reason for the roadway deformation was that traditional support methods and materials cannot control the large deformation of deep soft rock. Deep soft rock support technology was developed based on constant resistance energy absorption using constant resistance large deformation bolts. The correlative deformation mechanisms of surrounding rock and bolt were analyzed to understand the principle of constant resistance energy absorption. The new technology works well on-site and provides a new method for the excavation of roadways in Tertiary deep soft rock.

  5. Picturing recovery: a photovoice exploration of recovery dimensions among people with serious mental illness.

    Science.gov (United States)

    Cabassa, Leopoldo J; Nicasio, Andel; Whitley, Rob

    2013-09-01

    Recovery from mental disorders encompasses multiple interrelated dimensions. This study used photovoice to explore how individuals with serious mental illness and a history of substance abuse and homelessness envisioned their recovery. A dimensional recovery model was applied to examine how the interrelationships between recovery dimensions supported consumers' recovery journeys. Photovoice is a participatory research method that empowers people by giving them cameras to document their experiences and inform social action. Sixteen consumers recruited from two supported housing agencies participated in six weekly sessions to which they brought photographs that they took of persons and events in their lives that reflected recovery and wellness and discussed the meaning of the photographs in individual interviews and group sessions. The authors used pile-sorting, grounded theory, and a deductive template-analytic technique to analyze narrative and visual data. Spirituality, life achievements, and receiving and providing support were the most salient themes that emerged from the analysis and illustrate beneficial interrelationships between recovery dimensions. Participants discussed how they relied on their spirituality to support their sobriety and cope with addictions-aspects of clinical recovery. Educational and vocational achievements represented gains in functioning that contributed to increasing self-esteem and self-agency and reducing self-stigma. Social dimensions of recovery, such as receiving and giving support to loved ones, rippled through consumers' lives reducing isolation and enhancing their self-worth. The findings illustrate the value of participatory methods to understand what recovery signified to people with serious mental illness and how understanding the interrelationships between recovery dimensions can inform recovery-oriented services.

  6. Recovery of light nonaqueous-phase liquids without groundwater pumping

    International Nuclear Information System (INIS)

    Markley, D.E.; Prince-Larsen, N.

    1995-01-01

    This paper outlines recovery of light nonaqueous-phase liquids (LNAPL) encountered in the subsurface at a remote natural gas facility. Remediation of LNAPL in the subsurface usually begins with dual pumping of LNAPL and groundwater. However, regulations required that only LNAPL be recovered. Methods were sought for recovering LNAPL from groundwater without pumping groundwater to the surface. Alternative methods of LNAPL recovery, using a variety of skimming pumps, included: LNAPL recovery from large-diameter wells; LNAPL recovery from trenches; LNAPL recovery from small-diameter wells; and vacuum-enhanced recovery of LNAPL while skimming with a belt skimmer. Based on the goals of the site owner and the costs associated with each alternative examined, the recommended method for recovering LNAPL without groundwater pumping was recovery of LNAPL while skimming with a belt skimmer. This paper discusses both the advantages and limitations of this technique

  7. Surviving ICU: Stories of recovery.

    Science.gov (United States)

    Ewens, Beverley A; Hendricks, Joyce M; Sundin, Deborah

    2018-02-28

    The aim of this study was to investigate stories of recovery through the lens of intensive care unit (ICU) survivors. Survival from ICUs is increasing, as are associated physical and psychological complications. Despite the significant impact on survivors, there is inadequate support provision in Australia and world-wide for this population. An interpretive biographical approach of intensive care survivors' experiences of recovery. Data were collected during 2014-2015 from diaries, face to face interviews, memos and field notes. Six participants diarized for 3 months commencing 2 months after hospital discharge. At 5 months, participants were interviewed about the content of their diaries and symbols and signifiers in them to create a shared meaning. Analysis of diaries and interviews were undertaken using two frameworks to identify themes throughout participants' stories and provides a unique portrait of recovery through their individual lens. Participants considered their lives had irreparably changed and yet felt unsupported by a healthcare system that had "saved" them. This view through their lens identified turmoil, which existed between their surface and inner worlds as they struggled to conform to what recovery "should be". The novel biographical methods provided a safe and creative way to reveal survivors' inner thoughts and feelings. Participants' considered creating their stories supported their recovery process and in particular enabled them to reflect on their progress. Findings from this study may lead to increased awareness among health care providers about problems survivors face and improved support services more broadly, based on frameworks appropriate for this population. © 2018 John Wiley & Sons Ltd.

  8. Assessment of chronic diarrhea in early infancy in Tehran Tertiary Care Center; Tehran-Iran

    OpenAIRE

    Farzaneh Motamed; Naheid Kazemi; Raheleh Nabavizadeh

    2015-01-01

    Introduction Chronic diarrhea of infancy is a heterogeneous syndrome that includes several diseases with different etiologies. The aim of this study was investigating chronic diarrhea, its etiologies, clinical features and outcomes in infancy.Materials and Methods Retrospective study investigating infants hospitalized in the gastroenterology department of Tehran tertiary care center.The main demographic data, etiology, characteristics of diarrhea, and outcome were evaluated. Data were analyze...

  9. CLINICAL PROFILE AND COMMON CAUSES OF HAEMOLYTIC ANAEMIA IN A TERTIARY CARE HOSPITAL, NORTHERN KERALA

    OpenAIRE

    Jog Antony; Reeta J; Sreelakshmi S; Rohit Mathew4; Adarsh Surendran

    2016-01-01

    BACKGROUND Haemolytic anaemia is a well-recognised clinical problem. This study looks into the clinical profile of haemolytic anaemia and also attempts to find out the common underlying causative disease. It also tries to group the patients according to the clinical manifestations and underlying causes. MATERIALS AND METHODS This is a hospital-based observational study conducted in a tertiary care centre in Northern Kerala. Forty-four adult patients with clinical manifestati...

  10. Clinicomycological Characterization of Superficial Mycoses from a Tertiary Care Hospital in Nepal

    OpenAIRE

    Khadka, Sundar; Sherchand, Jeevan Bahadur; Pokharel, Dinesh Binod; Pokhrel, Bharat Mani; Mishra, Shyam Kumar; Dhital, Subhash; Rijal, Basista

    2016-01-01

    Background. Superficial mycosis is a common fungal infection worldwide, mainly caused by dermatophytes. However, the prevalence of species varies geographically. In addition, fungal treatment is best guided according to species isolated. This study was carried out to determine the clinical as well as mycological profile of superficial mycoses in a tertiary care hospital, Nepal. Methods. This was a prospective case-control laboratory based study conducted over a period of six months from Janua...

  11. Oncologic Outcomes of Patients With Gleason Score 7 and Tertiary Gleason Pattern 5 After Radical Prostatectomy

    OpenAIRE

    Leng, Yi-Hsueh; Lee, Won Jun; Yang, Seung Ok; Lee, Jeong Ki; Jung, Tae Young; Kim, Yun Beom

    2013-01-01

    Purpose We evaluated oncologic outcomes following radical prostatectomy (RP) in patients with a Gleason score (GS) of 7 with tertiary Gleason pattern 5 (TGP5). Materials and Methods We retrospectively reviewed the medical records of 310 patients who underwent RP from 2005 to 2010. Twenty-four patients who received neoadjuvant or adjuvant antiandrogen deprivation or radiation therapy were excluded. Just 239 (GS 6 to 8) of the remaining 286 patients were included in the study. Patients were cla...

  12. Clinical predictors of anticipatory emesis in patients treated with chemotherapy at a tertiary care cancer hospital

    OpenAIRE

    Qureshi, Fawad; Shafi, Azhar; Ali, Sheeraz; Siddiqui, Neelam

    2016-01-01

    Objective: To determine the clinical predictors of anticipatory emesis in patients treated with chemotherapy at a tertiary care cancer hospital. Methods: This was a cross-sectional study conducted on 200 patients undergoing first line chemotherapy with minimum of two cycles at inpatient department and chemotherapy bay of Shaukat Khanum Memorial Cancer Hospital and Research Centre Pakistan. Anticipatory nausea and vomiting develops before administration of chemotherapy. Clinical signs and symp...

  13. Echocardiographic evaluation of simple versus complex congenital heart disease in a tertiary care Paediatrics Hospital

    OpenAIRE

    Uttam Kumar Sarkar; Anish Chatterjee; Suprit Basu; Atanu Pan; Sumit Periwal

    2017-01-01

    Background & Objectives:Congenital heart diseases are treatable either by catheter based intervention or open heart surgery according to their quality. In our study we aim to analyze congenital heart disease echocardiographically into simple versus complex heart disease at a tertiary care centre with a public health planning and policy making perspective.Materials & Methods:This hospital based study was done on 1010 patients, both from in-patient and out-patient, who were clinically s...

  14. Ambient Noise Levels in Acute Neonatal Intensive Care Unit of a Tertiary Referral Hospital

    OpenAIRE

    Sonia R. B D'Souza; Leslie Edward Lewis; Vijay Kumar; Ramesh Bhat Y; Jayashree Purkayastha; Hari Prakash

    2017-01-01

    Background: Advances in neonatal care have resulted in improved survival of neonates admitted to the intensive care of the Neonatal Intensive Care Unit (NICU). However, the NCU may be an inappropriate milieu, with presence of overwhelming stimuli, most potent being the continuous presence of noise in the ambience of the NICU. Aim and Objectives: To determine and describe the ambient noise levels in the acute NICU of a tertiary referral hospital. Material and Methods...

  15. Perineal burn contractures: An experience in tertiary hospital of a Himalayan state

    Directory of Open Access Journals (Sweden)

    Thakur Jagdeep

    2008-01-01

    Full Text Available Perineal burn contracture is a rare burn sequel. We conducted a retrospective analysis of cases with perineal burn contractures managed in a tertiary care centre of a Himalayan state. We found that all cases sustained burn injury from burning firewood and the time of presentation was two to six years after the burn injury. We analyzed our treatment method and have classified these contractures into two types.

  16. NEEDLESTICK INJURY AMONG HEALTHCARE WORKERS IN A TERTIARY CARE HOSPITAL, KERALA

    OpenAIRE

    Chintha Sujatha; Jacquilene Vadasseril; Govind Jayaprakash; John K. Joy

    2017-01-01

    BACKGROUND Needlestick Injury (NSI) is a major occupational health and safety issue among Healthcare Workers (HCWs). In India, incidence of NSI is high, but surveillance is poor with scarce authentic data. The aim of the study is to determine the occurrence of NSI, its associated factors and assessment of knowledge and practice of preventive measures and post exposure prophylaxis among HCWs in a tertiary care hospital in Kerala. MATERIALS AND METHODS A cross-sectional study ...

  17. Measuring the Recovery Orientation of ACT

    Science.gov (United States)

    Salyers, Michelle P.; Stull, Laura G.; Rollins, Angela L.; McGrew, John H.; Hicks, Lia J.; Thomas, Dave; Strieter, Doug

    2014-01-01

    Background Approaches to measuring recovery orientation are needed, particularly for programs that may struggle with implementing recovery-oriented treatment. Objective A mixed methods comparative study was conducted to explore effective approaches to measuring recovery orientation of Assertive Community Treatment (ACT) teams. Design Two ACT teams exhibiting high and low recovery orientation were compared using surveys, treatment plan ratings, diaries of treatment visits, and team-leader-reported treatment control mechanisms. Results The recovery-oriented team differed on one survey measure (higher expectations for consumer recovery), treatment planning (greater consumer involvement and goal-directed content), and use of control mechanisms (less use of representative payee, agency-held lease, daily medication delivery, and family involvement). Staff and consumer diaries showed the most consistent differences (e.g., conveying hope and choice) and were the least susceptible to observer bias, but had the lowest response rates. Conclusions Several practices differentiate recovery orientation on ACT teams, and a mixed-methods assessment approach is feasible. PMID:23690285

  18. Adaptation to and Recovery from Global Catastrophe

    Directory of Open Access Journals (Sweden)

    Seth D. Baum

    2013-03-01

    Full Text Available Global catastrophes, such as nuclear war, pandemics and ecological collapse threaten the sustainability of human civilization. To date, most work on global catastrophes has focused on preventing the catastrophes, neglecting what happens to any catastrophe survivors. To address this gap in the literature, this paper discusses adaptation to and recovery from global catastrophe. The paper begins by discussing the importance of global catastrophe adaptation and recovery, noting that successful adaptation/recovery could have value on even astronomical scales. The paper then discusses how the adaptation/recovery could proceed and makes connections to several lines of research. Research on resilience theory is considered in detail and used to develop a new method for analyzing the environmental and social stressors that global catastrophe survivors would face. This method can help identify options for increasing survivor resilience and promoting successful adaptation and recovery. A key point is that survivors may exist in small isolated communities disconnected from global trade and, thus, must be able to survive and rebuild on their own. Understanding the conditions facing isolated survivors can help promote successful adaptation and recovery. That said, the processes of global catastrophe adaptation and recovery are highly complex and uncertain; further research would be of great value.

  19. Description of recovery method used for curdlan produced by Agrobacterium sp. IFO 13140 and its relation to the morphology and physicochemical and technological properties of the polysaccharide.

    Science.gov (United States)

    Mangolim, Camila Sampaio; Silva, Thamara Thaiane da; Fenelon, Vanderson Carvalho; Koga, Luciana Numata; Ferreira, Sabrina Barbosa de Souza; Bruschi, Marcos Luciano; Matioli, Graciette

    2017-01-01

    Curdlan is a linear polysaccharide considered a dietary fiber and with gelation properties. This study evaluated the structure, morphology and the physicochemical and technological properties of curdlan produced by Agrobacterium sp. IFO 13140 recovered by pre-gelation and precipitation methods. Commercial curdlan submitted or otherwise to the pre-gelation process was also evaluated. The data obtained from structural analysis revealed a similarity between the curdlan produced by Agrobacterium sp. IFO 13140 (recovered by both methods) and the commercial curdlans. The results showed that the curdlans evaluated differed significantly in terms of dispersibility and gelation, and only the pre-gelled ones had significant potential for food application, because this method influence on the size of the particles and in the presence of NaCl. In terms of technological properties, the curdlan produced by Agrobacterium sp. IFO 13140 (pre-gelation method) had a greater water and oil holding capacity (64% and 98% greater, respectively) and a greater thickening capacity than the pre-gelled commercial curdlan. The pre-gelled commercial curdlan displayed a greater gelling capacity at 95°C than the others. When applied to food, only the pre-gelled curdlans improved the texture parameters of yogurts and reduced syneresis. The curdlan gels, which are rigid and stable in structure, demonstrated potential for improving the texture of food products, with potential industrial use.

  20. Nitrogen oxide emissions from a kraft recovery furnace

    International Nuclear Information System (INIS)

    Prouty, A.L.; Stuart, R.C.; Caron, A.L.

    1993-01-01

    Nitrogen Oxide (NOx) emissions from a rebuilt kraft recovery furnace slightly exceeded the specified limit of 1.1 lb/ton (0.55 kg/metric ton) of black-liquor solids. Mill trials were undertaken to determine whether NOx emissions could be minimized by modifying furnace operation. NOx emissions increased when secondary air was shifted to tertiary ports. NOx emissions fell when the amounts of primary and total air were decreased, but this increased emissions of other pollutants. After demonstrating that best operation of the furnace could not meet the permit with an emissions limit that matched the furnace's performance at best operation

  1. Implementing recovery: an analysis of the key technologies in Scotland

    Science.gov (United States)

    2011-01-01

    Background Over the past ten years the promotion of recovery has become a stated aim of mental health policies within a number of English speaking countries, including Scotland. Implementation of a recovery approach involves a significant reorientation of mental health services and practices, which often poses significant challenges for reformers. This article examines how four key technologies of recovery have assisted in the move towards the creation of a recovery-oriented mental health system in Scotland. Methods Drawing on documentary analysis and a series of interviews we examine the construction and implementation of four key recovery 'technologies' as they have been put to use in Scotland: recovery narratives, the Scottish Recovery Indicator (SRI), Wellness Recovery Action Planning (WRAP) and peer support. Results Our findings illuminate how each of these technologies works to instantiate, exemplify and disseminate a 'recovery orientation' at different sites within the mental health system in order to bring about a 'recovery oriented' mental health system. They also enable us to identify some of the factors that facilitate or hinder the effectiveness of those technologies in bringing about a change in how mental health services are delivered in Scotland. These finding provide a basis for some general reflections on the utility of 'recovery technologies' to implement a shift towards recovery in mental health services in Scotland and elsewhere. Conclusions Our analysis of this process within the Scottish context will be valuable for policy makers and service coordinators wishing to implement recovery values within their own national mental health systems. PMID:21569633

  2. Implementing recovery: an analysis of the key technologies in Scotland

    Directory of Open Access Journals (Sweden)

    Sturdy Steve

    2011-05-01

    Full Text Available Abstract Background Over the past ten years the promotion of recovery has become a stated aim of mental health policies within a number of English speaking countries, including Scotland. Implementation of a recovery approach involves a significant reorientation of mental health services and practices, which often poses significant challenges for reformers. This article examines how four key technologies of recovery have assisted in the move towards the creation of a recovery-oriented mental health system in Scotland. Methods Drawing on documentary analysis and a series of interviews we examine the construction and implementation of four key recovery 'technologies' as they have been put to use in Scotland: recovery narratives, the Scottish Recovery Indicator (SRI, Wellness Recovery Action Planning (WRAP and peer support. Results Our findings illuminate how each of these technologies works to instantiate, exemplify and disseminate a 'recovery orientation' at different sites within the mental health system in order to bring about a 'recovery oriented' mental health system. They also enable us to identify some of the factors that facilitate or hinder the effectiveness of those technologies in bringing about a change in how mental health services are delivered in Scotland. These finding provide a basis for some general reflections on the utility of 'recovery technologies' to implement a shift towards recovery in mental health services in Scotland and elsewhere. Conclusions Our analysis of this process within the Scottish context will be valuable for policy makers and service coordinators wishing to implement recovery values within their own national mental health systems.

  3. Oil removal of spent hydrotreating catalyst CoMo/Al2O3 via a facile method with enhanced metal recovery.

    Science.gov (United States)

    Yang, Yue; Xu, Shengming; Li, Zhen; Wang, Jianlong; Zhao, Zhongwei; Xu, Zhenghe

    2016-11-15

    Deoiling process is a key issue for recovering metal values from spent hydrotreating catalysts. The oils can be removed with organic solvents, but the industrialized application of this method is greatly hampered by the high cost and complex processes. Despite the roasting method is simple and low-cost, it generates hardest-to-recycle impurities (CoMoO4 or NiMoO4) and enormous toxic gases. In this study, a novel and facile approach to remove oils from the spent hydrotreating catalysts is developed. Firstly, surface properties of spent catalysts are characterized to reveal the possibility of oil removal. And then, oils are removed with water solution under the conditions of 90°C, 0.1wt% SDS, 2.0wt% NaOH and 10ml/gL/S ratio for 4h. Finally, thermal treatment and leaching tests are carried out to further explore the advantages of oil removal. The results show that no hardest-to-recycle impurity CoMoO4 is found in XPS spectra of thermally treated samples after deoiling and molybdenum is leached completely with sodium carbonate solution. It means that the proposed deoiling method can not only remove oils simply and without enormous harmful gases generating, but also avoid the generation of detrimental impurity and promote recycling of valuable metals from spent hydrotreating catalysts. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Actinide recovery from pyrochemical residues

    International Nuclear Information System (INIS)

    Avens, L.R.; Clifton, D.G.; Vigil, A.R.

    1985-05-01

    We demonstrated a new process for recovering plutonium and americium from pyrochemical waste. The method is based on chloride solution anion exchange at low acidity, or acidity that eliminates corrosive HCl fumes. Developmental experiments of the process flow chart concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 6 2- from high-chloride low-acid solution. Americium and other metals are washed from the ion exchange column with lN HNO 3 -4.8M NaCl. After elution, plutonium is recovered by hydroxide precipitation, and americium is recovered by NaHCO 3 precipitation. All filtrates from the process can be discardable as low-level contaminated waste. Production-scale experiments are in progress for MSE residues. Flow charts for actinide recovery from electro-refining and direct oxide reduction residues are presented and discussed

  5. Students’ Perceptions on a Good Tertiary Foreign Language Teacher

    Directory of Open Access Journals (Sweden)

    Siti Tarwiyah

    2013-11-01

    Full Text Available This paper investigates students’ perception of tertiary teachers’ attitude, method of teaching and classroom management in the teaching and learning of (professional, pedagogic, social and personality competence English and Arabic Language at IAIN Walisongo Semarang. This study is designed quantitavely and qualitatively using closed and open-ended questionnaire for collecting data. The subject of this research is the second semester students of the two faculties at IAIN Walisongo who, in that semester, take Arabic or English language course. The subject is chosen because based on 2012 course distribution, English and Arabic are distributed in the first and the second semester. The findings revealed that it is clearly seen that KPI (Islamic Communication & Broadcasting department students have better perception to their English language teachers. Meanwhile, students who have better perception to their Arabic Language Teachers are those from Islamic Counseling Departments (BPI of Dakwah faculty. Data of Tarbiyah Faculty shows Arabic language teachers are dominating. Arabic language teachers win 0.5 over English language teachers in almost all characteristics. This implies that expected performance of students in English Language is based on the teachers’ attitude, method of teaching the subject and classroom management. Based on the above-findings, recommendations were made.

  6. Spectral Induced Polarization (SIP) monitoring during Microbial Enhanced Oil Recovery (MEOR)

    Science.gov (United States)

    Heenan, J. W.; Ntarlagiannis, D.; Slater, L. D.

    2010-12-01

    Jeffrey Heenan, Dimitrios Ntarlagiannis, Lee Slater Department of Earth and Environmental Sciences, Rutgers University, Newark NJ Microbial Enhanced Oil Recovery (MEOR) is an established, cost effective, method for enhancing tertiary oil recovery. Although not commonly used for shallow heavy oils, it could be a viable alternative since it can offer sustainable economic recovery and minimal environmental impact. A critical component of successful MEOR treatments is accurate, real time monitoring of the biodegradation processes resulting from the injection of microbial communities into the formation; results of recent biogeophysical research suggest that minimally-invasive geophysical methods could significantly contribute to such monitoring efforts. Here we present results of laboratory experiments, to assess the sensitivity of the spectral induced polarization method (SIP) to MEOR treatments. We used heavy oil, obtained from a shallow oilfield in SW Missouri, to saturate three sand columns. We then followed common industry procedures,and used a commercially available microbial consortia, to treat the oil columns. The active MEOR experiments were performed in duplicate while a control column maintained similar conditions, without promoting microbial activity and oil degradation. We monitored the SIP signatures, between 0.001 Hz and 1000 Hz, for a period of six months. To support the geophysical measurements we also monitored common geochemical parameters, including pH, Eh and fluid conductivity, and collected weekly fluid samples from the outflow and inflow for further analysis; fluid samples were analyzed to confirm that microbes actively degraded the heavy oils in the column while destructive analysis of the solid materials was performed upon termination of the experiment. Preliminary analysis of the results suggests that SIP is sensitive to MEOR processes. In both inoculated columns we recorded an increase in the low frequency polarization with time; measureable

  7. Lignin recovery. A resource to value

    International Nuclear Information System (INIS)

    Zimbardi, P.; Cardinale, G.; Demichele, M.; Nanna, F.; Viggiano, D.; Bonini, C.; D'Alessio, L.; D'Auria, M.; Teghil, R.; Tofani, D.

    1999-01-01

    In the present paper, the effects of the steam explosion (ES) pretreatment conditions on recovery and chemical structure of wheat straw lignin are reported. The experimental data of lignin recovery by caustic extraction, followed by acid precipitation, have been interpolated to obtain the dependence on the time and temperature of SE. The lignin has been characterised by using several methods. Preliminary results on the synthesis of copolymers lignin-styrene are also reported [it

  8. Social Activities and Manifest Anxiety among Freshmen in Tertiary ...

    African Journals Online (AJOL)

    ) in tertiary institutions in Lagos state of Nigeria were analysed to determine the relationship between social activities and manifest anxiety. Social activities in the study were measured in terms of freshmen adjustment to religious activities and ...

  9. Factors affecting utilization of University health services in a tertiary ...

    African Journals Online (AJOL)

    2013-01-16

    Jan 16, 2013 ... Objective: To determine students' perception of health care services provided in a tertiary institution and ... evaluation of health services utilization among students in the .... African culture and health. ... Asian Am Pac Isl J.

  10. Assessment of job satisfaction among health workers in a tertiary ...

    African Journals Online (AJOL)

    Assessment of job satisfaction among health workers in a tertiary hospital in Zaria ... factors affecting job satisfaction and retention of health professionals working in ... help the hospital management to increase their employee's job satisfaction.

  11. Employees' Assessment Of Customer Focus In A Tertiary Hospital In ...

    African Journals Online (AJOL)

    Employees' Assessment Of Customer Focus In A Tertiary Hospital In ... tool 'Are we making progress?' were used by respondents to rate customer focus. ... that they were allowed to take decisions to solve problems for customers (p < 0.001).

  12. Helpless patients' perception of bed-bath in tertiary health ...

    African Journals Online (AJOL)

    Helpless patients' perception of bed-bath in tertiary health institutions in Enugu, Southeast Nigeria. ... Journal Home > Vol 10, No 2 (2005) > ... patients to bed bathing by nurses is a very important aspect of quality assurance in nursing care.

  13. Enhancing learning in tertiary institutions through multimedia based ...

    African Journals Online (AJOL)

    Enhancing learning in tertiary institutions through multimedia based ... convenient and cost-effective courseware reengineering methodology of our age. ... Also discussed are the reasons for converting classroom courses to e-learning format.

  14. Integrated Identity and Access Management System for Tertiary ...

    African Journals Online (AJOL)

    Nigerian Journal of Technology ... identity management and access control and the unavailability of actionable information on pattern of ... This Tertiary Identity and Access Management System (T-IAMS) is a fingerprint biometric database that ...

  15. Sexism and Sexual Harassment in Tertiary Institutions | Akpotor ...

    African Journals Online (AJOL)

    Gender and Behaviour ... Sexual harassment is a recurring decimal in tertiary institutions. The paper therefore investigates the effects of sexual harassment on the academic performance of female students, using Delta State University, Abraka, ...

  16. Energy recovery from wastes

    International Nuclear Information System (INIS)

    De Stefanis, P.

    1999-01-01

    In this paper are reported analysis of some energy recovery form wastes plants. In this work are considered materials and energy flows, environmental impacts and related treatment costs and financial resources [it

  17. Recovery Audit Program

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Recovery Audit Programs mission is to identify and correct Medicare improper payments through the efficient detection and collection of overpayments made on...

  18. FEMA Disaster Recovery Centers

    Data.gov (United States)

    Department of Homeland Security — This is a search site for FEMA's Disaster Recovery Centers (DRC). A DRC is a readily accessible facility or mobile office set up by FEMA where applicants may go for...

  19. Spatially Dispersed Employee Recovery

    DEFF Research Database (Denmark)

    Hvass, Kristian Anders; Torfadóttir, Embla

    2014-01-01

    Employee recovery addresses either employee well-being or management's practices in aiding employees in recovering themselves following a service failure. This paper surveys the cabin crew at a small, European, low-cost carrier and investigates employees' perceptions of management practices to aid...... personnel achieve service recovery. Employee recovery within service research often focuses on front-line employees that work in a fixed location, however a contribution to the field is made by investigating the recovery of spatially dispersed personnel, such as operational personnel in the transport sector......, who have a work place away from a fixed or central location and have minimal management contact. Results suggest that the support employees receive from management, such as recognition, information sharing, training, and strategic awareness are all important for spatially dispersed front...

  20. Recovery Action Mapping Tool

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Recovery Action Mapping Tool is a web map that allows users to visually interact with and query actions that were developed to recover species listed under the...

  1. Risk of malignancy index used as a diagnostic tool in a tertiary centre for patients with a pelvic mass

    DEFF Research Database (Denmark)

    Håkansson, Fanny; Høgdall, Estrid V S; Nedergaard, Lotte

    2012-01-01

    Abstract Objective. Risk of malignancy index (RMI), based on a serum cancer antigen 125 level, ultrasound findings and menopausal status, is used to discriminate ovarian cancer from benign pelvic mass. In Denmark, patients with pelvic mass and RMI =200 are referred to tertiary gynecologic oncology...... the use of RMI =200 as a tool for preoperative identification of ovarian cancer at a tertiary center. Design. Prospective observational study. Setting. A tertiary center in Copenhagen, Denmark. Population. One thousand one hundred and fifty-nine women with pelvic mass. Methods. The RMI was calculated...... pelvic mass. Results. There were 778 women diagnosed with benign pelvic mass, while 251 had ovarian cancer and 74 had borderline ovarian tumor. Fifty-six women were diagnosed with other forms of cancer. Sensitivity and specificity for ovarian cancer vs. benign pelvic mass for RMI =200 were 92 and 82...

  2. Double peak-induced distance error in short-time-Fourier-transform-Brillouin optical time domain reflectometers event detection and the recovery method.

    Science.gov (United States)

    Yu, Yifei; Luo, Linqing; Li, Bo; Guo, Linfeng; Yan, Jize; Soga, Kenichi

    2015-10-01

    The measured distance error caused by double peaks in the BOTDRs (Brillouin optical time domain reflectometers) system is a kind of Brillouin scattering spectrum (BSS) deformation, discussed and simulated for the first time in the paper, to the best of the authors' knowledge. Double peak, as a kind of Brillouin spectrum deformation, is important in the enhancement of spatial resolution, measurement accuracy, and crack detection. Due to the variances of the peak powers of the BSS along the fiber, the measured starting point of a step-shape frequency transition region is shifted and results in distance errors. Zero-padded short-time-Fourier-transform (STFT) can restore the transition-induced double peaks in the asymmetric and deformed BSS, thus offering more accurate and quicker measurements than the conventional Lorentz-fitting method. The recovering method based on the double-peak detection and corresponding BSS deformation can be applied to calculate the real starting point, which can improve the distance accuracy of the STFT-based BOTDR system.

  3. Incineration with energy recovery

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, T.G.

    1986-02-01

    Motherwell Bridge Tacol Ltd. operate a 'Licence Agreement' with Deutsche Babcock Anlagen of Krefeld, West Germany, for the construction of Municipal Refuse Incineration plant and Industrial Waste plant with or without the incorporation of waste heat recovery equipment. The construction in the UK of a number of large incineration plants incorporating the roller grate incinerator unit is discussed. The historical background, combustion process, capacity, grate details, refuse analysis and use as fuel, heat recovery and costs are outlined.

  4. Challenges with Tertiary-Level Mechatronic Fluid Power

    DEFF Research Database (Denmark)

    Dransfield, Peter; Conrad, Finn

    1996-01-01

    As authors we take the view that mechatronics, as it relates to fluid power, has three levels which we designate as primary, secondary and tertiary. A brief review of the current status of fluid power, hydraulic and pneumatic, and of electronic control of it is presented and discussed. The focus...... is then on tertiary-level mechatronic fluid power and the challenges to it being applied successfully....

  5. Tertiary colleges: a study of perspectives on organizational innovation

    OpenAIRE

    Preedy, Margaret

    1998-01-01

    The purpose of this research study was to explore organisational innovation in education with reference to one particular type of organisation - the tertiary college. The research sought to examine the extent to which the intended objectives for new educational organisations are realised in practice, and how far the goals and ethos which organisational leaders seek to promote are shared by organisational members. The study focused on eleven tertiary colleges, comparing the 'official' view of ...

  6. Assessment Quality in Tertiary Education: An Integrative Literature Review

    OpenAIRE

    Gerritsen-van Leeuwenkamp, Karin; Joosten-ten Brinke, Desirée; Kester, Liesbeth

    2018-01-01

    In tertiary education, inferior assessment quality is a problem that has serious consequences for students, teachers, government, and society. A lack of a clear and overarching conceptualization of assessment quality can cause difficulties in guaranteeing assessment quality in practice. Thus, the aim of this study is to conceptualize assessment quality in tertiary education by providing an overview of the assessment quality criteria, their influences, the evaluation of the assessment quality ...

  7. JACoW A new distributed control system for the consolidation of the CERN tertiary infrastructures

    CERN Document Server

    Scibile, Luigi; Villeton Pachot, Patrick

    2018-01-01

    The operation of the CERN tertiary infrastructures is carried out via a series of control systems distributed over the CERN sites (Meyrin and Prevessin). The scope comprises: $\\sim$ 260 buildings, 2 large heating plants ($\\sim$ 50 MW overall capacity) with 27 km heating network and 200 radiators circuits, $\\sim$ 500 air handling units, $\\sim$ 52 chillers, $\\sim$ 300 split systems, $\\sim$ 3000 electric boards and $\\sim$ 100k light points. In the last five years and with the launch of major tertiary infrastructure consolidations, CERN is carrying out a migration and an extension of the old control systems dated back to the 70's, 80's and 90's to a new simplified, yet innovative, distributed control system aimed at minimizing the programming and implementation effort, standardizing equipment and methods and reducing lifecycle costs. This new methodology allows for a rapid development and simplified integration of the new controlled building/infrastructure processes. The basic principle is based on open standards...

  8. A Mixed Methods Examination of Sleep Throughout the Alcohol Recovery Process Grounded in the Social Cognitive Theory: The Role of Self-Efficacy and Craving.

    Science.gov (United States)

    Brooks, Alyssa T; Krumlauf, Michael; Beck, Kenneth H; Fryer, Craig S; Yang, Li; Ramchandani, Vijay A; Wallen, Gwenyth R

    2018-03-01

    Sleep disturbances can accompany alcohol use disorders during various phases of the disease. This analysis utilized a mixed methods approach to assess whether sleep-related beliefs and/or behavior of individuals who are alcohol dependent were associated with sleep quality both pre- and postdischarge from a clinical research facility providing inpatient alcohol rehabilitation treatment. Individuals with higher self-efficacy for sleep (SE-S) reported better sleep quality at both time points. Individuals with fewer dysfunctional beliefs about sleep had poorer sleep quality at both time points. Individuals with higher unhealthy sleep-related safety behaviors had poorer sleep quality at both time points. In a linear regression model, only the difference in SE-S scores from pre- to postdischarge (β = -.396, p = .01) and the postdischarge Penn Alcohol Craving Score (β = .283, p = .019) significantly predicted the change in sleep quality. Thus, those whose SE-S scores increased and those with lower postdischarge craving scores were more likely to experience a decrease on Pittsburgh Sleep Quality Index scores from pre- to postdischarge even after controlling for covariates. References to behavior or personal factors were often discussed during the qualitative interviews in tandem with the environment. Participants reported both (1) self-medicating anxiety with alcohol and (2) self-medicating the inability to fall asleep with alcohol. Given the success of behavioral sleep interventions in various populations and the unique potential contributions of mixed methods approaches to examine sleep and alcohol use, assessing sleep-related cognitions and behaviors of individuals with severe alcohol use disorders may be important in understanding sleep quality and subsequent relapse.

  9. REE in some tertiary volcanic complexes in the Republic of Macedonia

    International Nuclear Information System (INIS)

    Tasev, Goran; Serafimovski, Todor

    2009-01-01

    Petrological and geochemical features of the Tertiary magmatic rocks from the Republic of Macedonia were subject of study in this paper. The latest K-Ar, 87 Sr/ 86 Sr, and REE data for samples from Kratovo- Zletovo, Sasa-Toranica and Damjan-Buchim ore districts are presented. Whole rock XRF analyses confirmed host rock composition as dacites, quartz-latites, trachyandesites, rhyolites and rhyodacites. Absolute age determinations by the K-Ar dating method have shown ages range from 31 to 14 Ma confirming Oligocene-Miocene age as previously determined by relative methods. Determinations of 87 Sr/ 86 Sr ratios (0.70504 to 0.71126) suggest material is sourced from the contact zone between the lower crust and upper mantle where contamination of primary melt occurred. New REE data including negative Eu anomalies along with previously determined La/Yb ratios ranging from 13.3 to 43.0 (Serafimovski 1990) confirm inferred material source. These new data reconfirm previous results, provide insight into the Tertiary magmatic history of the district, and suggest the exact origin of the material that produced the Tertiary magmatic rocks.

  10. Do psychological variables affect early surgical recovery?

    Directory of Open Access Journals (Sweden)

    Michael N Mavros

    Full Text Available BACKGROUND: Numerous studies have examined the effect of psychological variables on surgical recovery, but no definite conclusion has been reached yet. We sought to examine whether psychological factors influence early surgical recovery. METHODS: We performed a systematic search in PubMed, Scopus and PsycINFO databases to identify studies examining the association of preoperative psychological variables or interventions with objectively measured, early surgical outcomes. RESULTS: We identified 16 eligible studies, 15 of which reported a significant association between at least one psychological variable or intervention and an early postoperative outcome. However, most studies also reported psychological factors not influencing surgical recovery and there was significant heterogeneity across the studies. Overall, trait and state anxiety, state anger, active coping, subclinical depression, and intramarital hostility appeared to complicate recovery, while dispositional optimism, religiousness, anger control, low pain expectations, and external locus of control seemed to promote healing. Psychological interventions (guided relaxation, couple support visit, and psychiatric interview also appeared to favor recovery. Psychological factors unrelated to surgical outcomes included loneliness, perceived social support, anger expression, and trait anger. CONCLUSION: Although the heterogeneity of the available evidence precludes any safe conclusions, psychological variables appear to be associated with early surgical recovery; this association could bear important implications for clinical practice. Large clinical trials and further analyses are needed to precisely evaluate the contribution of psychology in surgical recovery.

  11. Characterisation of Tertiary Catalan lacustrine oil shales: Discovery of extremely organic sulphur-rich type I kerogens

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Las Heras, F.X.C. de; Bergen, P.F. van; Leeuw, J.W. de

    1993-01-01

    The kerogens of three Tertiary Catalan lacustrine oil shales were analyzed by light microscopy, flash pyrolysis-gas chromatography-mass spectrometry, and bulk composition methods (elemental analysis, Rock Eval pyrolysis). Two of the three kerogens (Ribesalbes and Campins) are extremely rich in

  12. Recovery post treatment: plans, barriers and motivators

    Directory of Open Access Journals (Sweden)

    Duffy Paul

    2013-01-01

    Full Text Available Abstract Background The increasing focus on achieving a sustained recovery from substance use brings with it a need to better understand the factors (recovery capital that contribute to recovery following treatment. This work examined the factors those in recovery perceive to be barriers to (lack of capital or facilitators of (presence of capital sustained recovery post treatment. Methods A purposive sample of 45 participants was recruited from 11 drug treatment services in northern England. Semi-structured qualitative interviews lasting between 30 and 90 minutes were conducted one to three months after participants completed treatment. Interviews examined key themes identified through previous literature but focused on allowing participants to explore their unique recovery journey. Interviews were transcribed and analysed thematically using a combination of deductive and inductive approaches. Results Participants generally reported high levels of confidence in maintaining their recovery with most planning to remain abstinent. There were indications of high levels of recovery capital. Aftercare engagement was high, often through self referral, with non substance use related activity felt to be particularly positive. Supported housing was critical and concerns were raised about the ability to afford to live independently with financial stability and welfare availability a key concern in general. Employment, often in the substance use treatment field, was a desire. However, it was a long term goal, with substantial risks associated with pursuing this too early. Positive social support was almost exclusively from within the recovery community although the re-building of relationships with family (children in particular was a key motivator post treatment. Conclusions Addressing internal factors and underlying issues i.e. ‘human capital’, provided confidence for continued recovery whilst motivators focused on external factors such as family and

  13. Applying Petroleum the Pressure Buildup Well Test Procedure on Thermal Response Test—A Novel Method for Analyzing Temperature Recovery Period

    Directory of Open Access Journals (Sweden)

    Tomislav Kurevija

    2018-02-01

    Full Text Available The theory of Thermal Response Testing (TRT is a well-known part of the sizing process of the geothermal exchange system. Multiple parameters influence the accuracy of effective ground thermal conductivity measurement; like testing time, variable power, climate interferences, groundwater effect, etc. To improve the accuracy of the TRT, we introduced a procedure to additionally analyze falloff temperature decline after the power test. The method is based on a premise of analogy between TRT and petroleum well testing, since the origin of both procedures lies in the diffusivity equation with solutions for heat conduction or pressure analysis during radial flow. Applying pressure build-up test interpretation techniques to borehole heat exchanger testing, greater accuracy could be achieved since ground conductivity could be obtained from this period. Analysis was conducted on a coaxial exchanger with five different power steps, and with both direct and reverse flow regimes. Each test was set with 96 h of classical TRT, followed by 96 h of temperature decline, making for almost 2000 h of cumulative borehole testing. Results showed that the ground conductivity value could vary by as much as 25%, depending on test time, seasonal period and power fluctuations, while the thermal conductivity obtained from the falloff period provided more stable values, with only a 10% value variation.

  14. Push-pull test: a method of evaluating formation adsorption parameters for predicting the environmental effects on in situ coal gasification and uranium recovery

    International Nuclear Information System (INIS)

    Drever, J.I.; McKee, C.R.

    1980-11-01

    The push-pull test, which is a simple injection and pumping sequence of groundwater spiked with solutes of interest, is presented as a method of determining the adsorption characteristics of a formation. Adsorption properties are necessary to predict restoration from both in situ coal gasification and in situ uranium extraction. The major problems in applying laboratory measurements to the field concern scaling the effect of particle size and obtaining representative samples. Laboratory measurements are conducted on gram to kilogram scale samples, whereas the push-pull test evaluates a sample weighing approximately 130 to 1000 metric tons, depending on volume injected and porosity. The problem in translating laboratory results to the field appear to be less severe for sedimentary uranium bodies than for coal. Laboratory measurements are useful in delineating ranges in adsorption properties and in planning the field experiment. Two field push-pull tests were conducted on uranium formations in Wyoming. Adsorption properties estimated from these tests on the basis of a simple cell model were compared to the laboratory values. In the first case, excellent agreement was observed between the values estimated from the field test and the values measured in the laboratory. In the second case, the value for K/sub d/ determined in the laboratory was five times higher than the field value. It is recommended that push-pull tests be conducted on coal formations being considered for in situ gasification in view of the great uncertainty in extrapolating laboratory adsorption properties to the field

  15. Peritoneal Cell-free DNA: an innovative method for determining acute cell damage in peritoneal membrane and for monitoring the recovery process after peritonitis.

    Science.gov (United States)

    Virzì, Grazia Maria; Milan Manani, Sabrina; Brocca, Alessandra; Cantaluppi, Vincenzo; de Cal, Massimo; Pastori, Silvia; Tantillo, Ilaria; Zambon, Roberto; Crepaldi, Carlo; Ronco, Claudio

    2016-02-01

    Cell-free DNA (cfDNA) is present in the peritoneal effluent of stable peritoneal dialysis (PD) patients, but there are no data on cfDNA in PD patients with peritonitis. We investigated the variation of peritoneal cfDNA levels subsequent to peritonitis in PD patients. We enrolled 53 PD patients: 30 without any history of systemic inflammation or peritonitis in the last 3 months (group A) and 23 with acute peritonitis (group B). CfDNA was quantified in the peritoneal effluent. Peritoneal samples on days 1, 3, 10, 30 and until day 120 from the start of peritonitis were collected for white blood cells (WBC) count and cfDNA evaluation in group B. Quantitative analysis of cfDNA showed significantly higher levels in group B on day 1, 3, 10 and 30 compared with group A (p peritoneal cfDNA levels tended to progressively decline during follow-up of peritonitis. From this decreasing curve, we estimated that 49 days are necessary to reach the value of 51 genome equivalents (GE)/ml (75th percentile in controls) and 63 days to reach 31 GE/ml (median). Our results demonstrate that cfDNA increases in peritoneal effluent of PD patients with peritonitis and tends to progressively decline in step with peritonitis resolution and membrane repair process. Peritoneal cfDNA quantification could be an innovative method to determine acute damage and an inverse index of the repair process.

  16. Tertiary Lymphoid Organs in Takayasu Arteritis.

    Science.gov (United States)

    Clement, Marc; Galy, Adrien; Bruneval, Patrick; Morvan, Marion; Hyafil, Fabien; Benali, Khadija; Pasi, Nicoletta; Deschamps, Lydia; Pellenc, Quentin; Papo, Thomas; Nicoletti, Antonino; Sacre, Karim

    2016-01-01

    The role of B cells in the pathogenesis of Takayasu arteritis (TA) is controversial. We aimed to study the presence of tertiary lymphoid organs (TLOs) in the aortic wall of TA patients. Hematoxylin and eosin-stained sections from aorta specimens from patients with TA were screened for TLOs. The presence of B cell aggregates (CD20), follicular dendritic cells (FDCs, CD21), and high endothelial venules (HEVs, PNAd) was investigated by immunohistochemistry. Immune cells from the adventitial layer of one patient were characterized by flow cytometry. Demographic, medical history, laboratory, imaging, treatment, and follow-up data were extracted from medical records. Aorta specimens from Bentall procedures were available from seven patients (5 females, aged 22-57 years) with TA. Surgical treatment was performed at TA diagnosis (n = 4) or at a median of 108 months (84-156) after TA diagnosis. Disease was active at surgery in four patients according to NIH score. B cell aggregates-TLOs containing HEVs were observed in the adventitia of all but one patient. Of note, ectopic follicles containing CD21(+) FDCs were found in all patients (4/4) with increased aortic (18)F-fluoro-deoxyglucose (FDG) uptake before surgery but were absent in all but one patients (2/3) with no FDG uptake. In addition, flow cytometry analysis confirmed the accumulation of memory/germinal center-like B cells in the adventitial layer and showed the presence of antigen-experienced T follicular helper cells. Ectopic lymphoid neogenesis displaying functional features can be found in the aortic wall of a subset of patients with active TA. The function of these local B cell clusters on the pathogenesis of TA remains to be elucidated.

  17. Fungal Profile of Vulvovaginal Candidiasis in a Tertiary Care Hospital.

    Science.gov (United States)

    Kalaiarasan, Krishnapriya; Singh, Rakesh; Chaturvedula, Latha

    2017-03-01

    Vulvovaginal Candidiasis (VVC) is a common medical health problem of adult women. It is most commonly caused by Candida albicans . But there is a change in fungal profile. Sabouraud's Dextrose Agar (SDA) is the most common culture medium used where mixed fungal infection may be missed. It can be detected easily by using chromogenic culture medium. To know the fungal profile of vulvovaginal candidiasis using Candida CHROMagar and antifungal susceptibility pattern in patients attending tertiary care hospital. Culture confirmed cases of VVC presented at Department of Obstetrics and Gynaecology of Jawaharlal Institute of Postgraduate Medical Education and Research (JIPMER), Puducherry, India, from July 2015 to December 2015 were included in the cross-sectional study. Two high vaginal swabs were collected and inoculated on SDA and Candida CHROMagar (Hi-Media, Mumbai, India). After overnight incubation the colonies were counted and colour of the colonies were recorded from Candida CHROMagar. Candida spp. were identified by sugar fermentation and assimilation tests and other conventional tests. Antifungal susceptibility tests were performed by the disc diffusion method using fluconazole (25 μg) and voriconazole (1μg) as per the Clinical and Laboratory Standards Institute (CLSI - M44-A2) guidelines. A total of 50 culture confirmed (23.7%) cases were detected from 211 clinically suspected VVC cases. Candida glabrata (45.1%) was the most common isolate, followed by Candida tropicalis (23.5%) , Candida albicans (17.6%) , Candida krusei (9.8%) and Candida parapsilosis (3.9%) . One mixed infection of C. glabrata and C. albicans was identified on Candida CHROMagar. Mixed fungal infection was observed in 2% of positive culture and 0.5% of VVC cases. The antifungal susceptibility testing revealed that 15.7% and 9.8% isolates of Candida spp. were resistant and Susceptible Dose Dependent (S-DD) respectively to fluconazole. The increase resistant against fluconazole was because of

  18. CLINICAL PROFILE OF ANAEMIA IN A TERTIARY CARE HOSPITAL

    Directory of Open Access Journals (Sweden)

    Ather Akhtar

    2016-04-01

    Full Text Available BACKGROUND Anaemia causes a reduction in the oxygen carrying capacity of the blood resulting in tissue hypoxia. Cardiac output at rest is not usually increased in most chronic anaemia until haemoglobin levels fall below 7 g/dL, but abnormal rise in output with exercise may occur with levels as high as 10 g/dL. The increase in cardiac output has been observed to correlate well with the degree of anaemia. Other compensatory mechanisms to chronic anaemia available to the body include decreased circulation time and increased tissue oxygen uptake. The latter is facilitated by a shift to the right of the oxygen haemoglobin dissociation curve. Cardiomegaly may also be as a result of the increased workload on the heart from the increased viscosity of blood in anaemia patients. Anaemia in the elderly is an extremely common problem that is associated with increased mortality and poorer health-related quality of life, regardless of the underlying cause of the low haemoglobin. A study of anaemia in elderly patients found a wide variation in prevalence, ranging from 2.9% to 61% in men and 3.3% to 41% in women. Higher rates were found in hospitalised patients than in community dwellers. It is easy to overlook anaemia in the elderly, since such symptoms as fatigue, weakness, or shortness of breath may be attributed to the ageing process itself. Our objective is to show the prevalence of anaemia even in a tertiary health care centre. METHODS One hundred patients were identified who were admitted in the Department of Medicine, Deccan College of Medical Sciences. Among the 100 patients, 38 were male and 62 were female. The study was conducted from Jan 2014 To Jan 2015. Patients having haemoglobin less than 10 g% in the medical wards were enrolled in the study. RESULTS Among the 100 patients, 38 were male and 62 were female. The average haemoglobin was 6.4 g%, the lowest being 2.8 g%. Peripheral blood smear showed hypochromic picture in 58, macrocytic picture in

  19. Polarization recovery through scattering media.

    Science.gov (United States)

    de Aguiar, Hilton B; Gigan, Sylvain; Brasselet, Sophie

    2017-09-01

    The control and use of light polarization in optical sciences and engineering are widespread. Despite remarkable developments in polarization-resolved imaging for life sciences, their transposition to strongly scattering media is currently not possible, because of the inherent depolarization effects arising from multiple scattering. We show an unprecedented phenomenon that opens new possibilities for polarization-resolved microscopy in strongly scattering media: polarization recovery via broadband wavefront shaping. We demonstrate focusing and recovery of the original injected polarization state without using any polarizing optics at the detection. To enable molecular-level structural imaging, an arbitrary rotation of the input polarization does not degrade the quality of the focus. We further exploit the robustness of polarization recovery for structural imaging of biological tissues through scattering media. We retrieve molecular-level organization information of collagen fibers by polarization-resolved second harmonic generation, a topic of wide interest for diagnosis in biomedical optics. Ultimately, the observation of this new phenomenon paves the way for extending current polarization-based methods to strongly scattering environments.

  20. Pattern of drug eruptions in a tertiary care hospital

    International Nuclear Information System (INIS)

    Tahir, Z.; Nadeem, N.; Aman, S.; Kazmi, A.H.

    2013-01-01

    Background: An adverse drug reaction is unintentional which occurs at doses used for prophylaxis, diagnosis or treatment. Objectives: To determine the frequency of various cutaneous drug eruptions that occur in patients in a tertiary care hospital setting. Patients and Methods: All patients with cutaneous drug eruptions seen at the Dermatology Department of Mayo Hospital, Lahore, over 6 months were enrolled and the pattern of drug eruptions like urticaria, angioedema, fixed drug eruption, maculopapular rash, erythema multiforme, Stevens-Johnson syndrome and toxic epidermal necrolysis etc. were recorded, along with drugs that caused it. Results:A total of 160 patients (86 males, 74 females) were included in the study. Mean age of patients was 30.7+-15.4 years. Major eruptions were fixed drug eruption (21.3%) followed by urticaria without angioedema (10%), maculopapular rash (9.3%), lichenoid drug eruption (8.7%), acneiform drug eruption (7.5%), Stevens-Johnson syndrome (6.9%), vesiculobullous eruption (5.6%), erythema multiforme and eczematous eruption (5% each). Common drugs causing eruptions were sulfonamides (16.3%), followed by NSAIDs (14.4%), herbal and homeopathic medications (12.5%), penicillins (9.3%), tetracyclines (8.7%), antituberculous drugs, cephalosporins and antiepileptics (6.3% each). Conclusion: Fixed drug eruption and urticaria without angioedema were commonest eruptions while, sulfonamides and NSAIDs were the major causative drugs. Policy message: Reporting of adverse drug reactions is not done in Pakistan and needs to be done in each hospital. (author)