WorldWideScience

Sample records for ternary fecuni alloys

  1. Ternary alloy nanocatalysts for hydrogen evolution reaction

    Indian Academy of Sciences (India)

    Cu–Fe–Ni ternary alloys (size ∼55–80 nm) with varying compositions viz. CuFeNi (A1), CuFe2Ni (A2) and CuFeNi2 (A3) were successfully synthesized using microemulsion. It is to be noted that synthesis of nanocrystallineternary alloys with precise composition is a big challenge which can be overcome by choosing an ...

  2. Ternary alloy nanocatalysts for hydrogen evolution reaction

    Indian Academy of Sciences (India)

    Ternary alloy nanocatalysts for hydrogen evolution reaction. SOUMEN SAHA1, SONALIKA VAIDYA2, KANDALAM V RAMANUJACHARY3,. SAMUEL E LOFLAND4 and ASHOK K GANGULI1,2,∗. 1Department of Chemistry, Indian Institute of Technology, Hauz Khas, New Delhi 110016, India. 2Institute of Nano Science and ...

  3. Synthesis of ternary nitrides by mechanochemical alloying

    DEFF Research Database (Denmark)

    Jacobsen, C.J.H.; Zhu, J.J.; Lindelov, H.

    2002-01-01

    Ternary metal nitrides ( of general formula MxM'N-y(z)) attract considerable interest because of their special mechanical, electrical, magnetic, and catalytic properties. Usually they are prepared by ammonolysis of ternary oxides (MxM'O-y(m)) at elevated temperatures. We show that ternary...... nitrides by mechanochemical alloying of a binary transition metal nitride (MxN) with an elemental transition metal. In this way, we have been able to prepare Fe3Mo3N and Co3Mo3N by ball-milling of Mo2N with Fe and Co, respectively. The transformation sequence from the starting materials ( the binary...... nitride and the transition metal) to the ternary nitride was followed by Mossbauer spectroscopy (for Fe3Mo3N) and by X-ray powder diffraction ( for both Fe3Mo3N and Co3Mo3N). Usually, the preparation of a given ternary nitride by ammonolysis of a ternary oxide is dependent on the availability of an oxide...

  4. A study of phase separation in ternary alloys

    Indian Academy of Sciences (India)

    Keywords. Ternary systems; Cahn–Hilliard equations; spinodal decomposition. Abstract. We have studied the evolution of microstructure when a disordered ternary alloy is quenched into a ternary miscibility gap. We have used computer simulations based on multicomponent Cahn–Hilliard (CH) equations for A and B, ...

  5. Corrosion and wear protective composition modulated alloy coatings based on ternary Ni-P-X alloys

    DEFF Research Database (Denmark)

    Leisner, P.; Benzon, M. E.; Christoffersen, Lasse

    1996-01-01

    Scattered reporting in the litterature describes a number of ternary Ni-P-X alloyes (where X can be Co, Cr, Cu, Mo, Pd, Re or W) with promising corrosin and wear protective performance. Based on a systematic study of Ni-P-X alloys it is the intention to produce coatings with improved corrosion...

  6. Experimental Investigation of Ternary Alloys for Fusion Breeding Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Choi, B. William [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chiu, Ing L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-26

    Future fusion power plants based on the deuterium-tritium (DT) fuel cycle will be required to breed the T fuel via neutron reactions with lithium, which will be incorporated in a breeding blanket that surrounds the fusion source. Recent work by LLNL proposed the used of liquid Li as the breeder in an inertial fusion energy (IFE) power plant. Subsequently, an LDRD was initiated to develop alternatives ternary alloy liquid metal breeders that have reduced chemical reactivity with water and air compared to pure Li. Part of the work plan was to experimentally investigate the phase diagrams of ternary alloys. Of particular interest was measurement of the melt temperature, which must be low enough to be compatible with the temperature limits of the steel used in the construction of the chamber and heat transfer system.

  7. Model for the Prediction of the Hydriding Thermodynamics of Pd-Rh-Co Ternary Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Teter, D.F.; Thoma, D.J.

    1999-03-01

    A dilute solution model (with respect to the substitutional alloying elements) has been developed, which accurately predicts the hydride formation and decomposition thermodynamics and the storage capacities of dilute ternary Pd-Rh-Co alloys. The effect of varying the rhodium and cobalt compositions on the thermodynamics of hydride formation and decomposition and hydrogen capacity of several palladium-rhodium-cobalt ternary alloys has been investigated using pressure-composition (PC) isotherms. Alloying in the dilute regime (<10 at.%) causes the enthalpy for hydride formation to linearly decrease with increasing alloying content. Cobalt has a stronger effect on the reduction in enthalpy than rhodium for equivalent alloying amounts. Also, cobalt reduces the hydrogen storage capacity with increasing alloying content. The plateau thermodynamics are strongly linked to the lattice parameters of the alloys. A near-linear dependence of the enthalpy of hydride formation on the lattice parameter was observed for both the binary Pd-Rh and Pd-Co alloys, as well as for the ternary Pd-Rh-Co alloys. The Pd-5Rh-3Co (at. %) alloy was found to have similar plateau thermodynamics as a Pd-10Rh alloy, however, this ternary alloy had a diminished hydrogen storage capacity relative to Pd-10Rh.

  8. Dynamical simulation of sputtering and reflection from a ternary alloy

    Science.gov (United States)

    Ishida, M.; Yamaguchi, Y.; Yoshinaga, H.; Yamamura, Y.

    The sputtering and the reflection from a Tb0.2Fe0.7Co0.1 alloy due to Ar+ ion bombardment have been investigated by the Monte Carlo simulation code ACAT-DIFFUSE which include the compositional change induced by ion influence. In the Tb-Fe-Co system, Fe atoms are preferentially sputtered. The atomic size of a Tb atom is the largest of these three atoms, and so Tb atoms trap preferentially in vacancies. The steady-state concentration of Tb atoms at the topmost layer is larger than the bulk concentration for the low energy ions due to radiation-induced segregation and preferential sputtering of Fe atoms. As the ion fluence increases, the atomic fractions of sputtered atoms calculated by the ACAT-DIFFUSE code become those of the bulk concentration. The depth profiles of each element at the steady state depend on the incident energy. The total sputtering yield and the reflection coefficient from a Tb-Fe-Co alloy calculated by the ACAT-DIFFUSE code are larger than those by the ACAT code at near-threshold energies, where the ACAT code does not include the ion-influence effect. The energy spectra of back-scattered Ar atoms from the present ternary alloy have very similar profiles to those from a monoatomic Tb target, especially for low-energy Ar+ ions.

  9. Impact toughness of ternary Al–Zn–Mg alloys in as cast and ...

    Indian Academy of Sciences (India)

    Unknown

    present work. The alloys were used in as cast and homogenized condition purely on the basis of theoretical and academic interest. 2. Experimental. Al–Zn–Mg alloys were obtained by melt casting and air ... six ternary alloys of different compositions were obtained. ... the ratio of shear stress to normal stress (it is equal to 1.

  10. Review of Reactivity Experiments for Lithium Ternary Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Jolodosky, A. [Univ. of California, Berkeley, CA (United States); Bolind, A. [Univ. of California, Berkeley, CA (United States); Fratoni, M. [Univ. of California, Berkeley, CA (United States)

    2015-09-28

    Lithium is often the preferred choice as breeder and coolant in fusion blankets as it offers high tritium breeding, excellent heat transfer and corrosion properties, and most importantly, it has very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and exacerbates plant safety concerns. Consequently, Lawrence Livermore National Laboratory (LLNL) is attempting to develop a lithium-based alloy—most likely a ternary alloy—which maintains the beneficial properties of lithium (e.g. high tritium breeding and solubility) while reducing overall flammability concerns for use in the blanket of an inertial fusion energy (IFE) power plant. The LLNL concept employs inertial confinement fusion (ICF) through the use of lasers aimed at an indirect-driven target composed of deuterium-tritium fuel. The fusion driver/target design implements the same physics currently experimented at the National Ignition Facility (NIF). The plant uses lithium in both the primary coolant and blanket; therefore, lithium related hazards are of primary concern. Reducing chemical reactivity is the primary motivation for the development of new lithium alloys, and it is therefore important to come up with proper ways to conduct experiments that can physically study this phenomenon. This paper will start to explore this area by outlining relevant past experiments conducted with lithium/air reactions and lithium/water reactions. Looking at what was done in the past will then give us a general idea of how we can setup our own experiments to test a variety of lithium alloys.

  11. FUNCTIONAL COATINGS BY TERNARY COBALT BASED ALLOYS FOR THE AUTUMOBILE INDUSTRY

    Directory of Open Access Journals (Sweden)

    T. Nenastіna

    2015-07-01

    Full Text Available The environmentally friendly and resource-saving technologies for producing multifunctional coatings based on cobalt and silver alloys with refractory metals are proposed. The catalytic activity testing results of binary and ternary alloys based on cobalt in the carbon monoxide oxidation reaction in carbon dioxide were analyzed. It was revealed that there is on improvement of functional properties of galvanic alloys when the content of tungsten and molybdenum is within the range of 10–30 wt. %.

  12. Deviations from Vegard’s law in ternary III-V alloys

    KAUST Repository

    Murphy, S. T.

    2010-08-03

    Vegard’s law states that, at a constant temperature, the volume of an alloy can be determined from a linear interpolation of its constituent’s volumes. Deviations from this description occur such that volumes are both greater and smaller than the linear relationship would predict. Here we use special quasirandom structures and density functional theory to investigate such deviations for MxN1−xAs ternary alloys, where M and N are group III species (B, Al, Ga, and In). Our simulations predict a tendency, with the exception of AlxGa1−xAs, for the volume of the ternary alloys to be smaller than that determined from the linear interpolation of the volumes of the MAs and BAs binary alloys. Importantly, we establish a simple relationship linking the relative size of the group III atoms in the alloy and the predicted magnitude of the deviation from Vegard’s law.

  13. Thermodynamics of Ga ternary alloys with Na and In, Sn or Zn

    Energy Technology Data Exchange (ETDEWEB)

    Dergacheva, M.B. [Institute of Org. Catalysis and Electrochem. NAN RK, Almaty (Kazakhstan); Shatrova, E.G. [Institute of Org. Catalysis and Electrochem. NAN RK, Almaty (Kazakhstan); Harina, O.V. [Institute of Org. Catalysis and Electrochem. NAN RK, Almaty (Kazakhstan)

    1996-12-01

    Thermodynamic properties of ternary liquid Ga alloys, containing Na (X{sub Na} = 0.025 to 0.045) and In, Sn or Zn have been determined by e.m.f. measurements. The partial thermodynamic properties of Na ({alpha}{sub Na}, {gamma}{sub Na}, {Delta} anti G{sub Na}, {Delta} anti S{sub Na}) have been calculated. The interaction of Na with the other components decreases in the following sequence: In => Sn => Zn. The liquidus temperatures of the investigated ternary alloys have been also determined. (orig.)

  14. Dynamic solidification mechanism of ternary Ag-Cu-Ge eutectic alloy under ultrasonic condition

    Science.gov (United States)

    Zhai, Wei; Hong, ZhenYu; Mei, CeXiang; Wang, WeiLi; Wei, BingBo

    2013-02-01

    The dynamic solidification of ternary Ag38.5Cu33.4Ge28.1 eutectic alloy within a 35 kHz ultrasonic field is investigated and compared with both its equilibrium solidification by DSC method and its rapid solidification in drop tube. The volume fractions of the primary (Ge) phase and pseudobinary (Ag+ ɛ 2) eutectic solidified within ultrasonic field are larger than those formed under equilibrium state, whereas that of ternary (Ag+ ɛ 2+Ge) eutectic exhibits the reverse trend. During rapid solidification, the liquid alloy droplet directly solidifies into ternary (Ag+ ɛ 2+Ge) eutectic if its diameter is smaller than 350 μm. The ultrasound stimulates the nucleation of alloy melt and prevents the bulk undercooling. With the increase of sound intensity, the primary (Ge) phase transfers from faceted dendrites to nonfaceted blocks with blunt edges, and its grain size is remarkably reduced. Both pseudobinary (Ag+ ɛ 2) and ternary (Ag+ ɛ 2+Ge) eutectics experience a morphological transition from regular to anomalous structures. This indicates that their cooperative growth mode is replaced by independent growth of eutectic phases under the combined effects of cavitation and acoustic streaming. The ultrasound also shows a prominent coarsening effect to the pseudobinary (Ag+ ɛ 2) and ternary (Ag+ ɛ 2 +Ge) eutectics.

  15. Corrosion Characteristics of Ti-29Nb-xHf Ternary Alloy for Biomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Pak, Sun Young; Choi, Han Chul [Chosun Univ., Kwangju (Korea, Republic of)

    2015-12-15

    The Cp-Ti and Ti-6Al-4V alloys were widely used for dental materials due to their mechanical properties and good corrosion resistance. However, Cp-Ti was known as bio-inert materials, Ti-6Al-4V alloy has a problem such as high Young modulus, potential loss of the surrounding bone, and to the release of potentially toxic ions from the alloy. To overcome this problem, Ti alloys containing Nb and Hf elements have been used for biomaterials due to low toxicity and high corrosion resistance. Especially, alloying element of Nb was known as β phase stabilizer. The β phase alloy was widely used to replace currently used implant materials. The corrosion resistances of Ti-29Nb-xHf ternary alloys were dependent on Hf content in oral environment solution.

  16. Properties of ternary NiFeW alloy coating by jet electrodeposition

    Indian Academy of Sciences (India)

    17

    Abstract. In this paper, ternary NiFeW alloy coatings were prepared by jet electrodeposition, and the effects of lord salt concentration, jet speed, current density, and temperature on the properties of the coatings, including the composition, microhardness, surface morphology, structure, and corrosion resistance, were ...

  17. Organic alloy systems suitable for the investigation of regular binary and ternary eutectic growth

    Science.gov (United States)

    Sturz, L.; Witusiewicz, V. T.; Hecht, U.; Rex, S.

    2004-09-01

    Transparent organic alloys showing a plastic crystal phase were investigated experimentally using differential scanning calorimetry and directional solidification with respect to find a suitable model system for regular ternary eutectic growth. The temperature, enthalpy and entropy of phase transitions have been determined for a number of pure substances. A distinction of substances with and without plastic crystal phases was made from their entropy of melting. Binary phase diagrams were determined for selected plastic crystal alloys with the aim to identify eutectic reactions. Examples for lamellar and rod-like eutectic solidification microstructures in binary systems are given. The system (D)Camphor-Neopentylglycol-Succinonitrile is identified as a system that exhibits, among others, univariant and a nonvariant eutectic reaction. The ternary eutectic alloy close to the nonvariant eutectic composition solidifies with a partially faceted solid-liquid interface. However, by adding a small amount of Amino-Methyl-Propanediol (AMPD), the temperature of the nonvariant eutectic reaction and of the solid state transformation from plastic to crystalline state are shifted such, that regular eutectic growth with three distinct nonfaceted phases is observed in univariant eutectic reaction for the first time. The ternary phase diagram and examples for eutectic microstructures in the ternary and the quaternary eutectic alloy are given.

  18. The structure and physical properties of the ternary CuZnPt{sub 6} alloy

    Energy Technology Data Exchange (ETDEWEB)

    Ziya, A.B. [Department of Physics, Bahauddin Zakariya University, Multan-60800 (Pakistan); Institute of Materials Science, University of Tsukuba, Tsukuba 305-8573 (Japan)], E-mail: amer_ziya@yahoo.com; Takahashi, M.; Ohshima, K. [Institute of Materials Science, University of Tsukuba, Tsukuba 305-8573 (Japan)

    2008-07-01

    The ternary addition of Zn to the binary Cu-Pt system was found to result in a complete miscibility at a stoichiometric composition of CuZnPt{sub 6}. The equilibrium ground state structure is face-centered cubic (fcc) (A{sub 1}-type). The results are associated with the alloying behavior in the ternary CuMPt{sub 6} (M=3d metals) system reported previously. They verify the fact that the Pt-based primary solid solution found in binary MPt{sub 3} alloys extends its region in the phase diagram to the composition of Cu:M:Pt=1:1:6. The Debye temperature ({theta}{sub D}) obtained is smaller than that of pure Pt, whereas no significant effect is observed on the linear thermal expansion and magnetic property of the alloy.

  19. Ternary diffusion in Cu-rich fcc Cu–Al–Si alloys at 1073 K

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Dandan [School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083 (China); State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Zhang, Lijun [State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Du, Yong, E-mail: yongducalphad@gmail.com [State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Xu, Honghui [State Key Laboratory of Powder Metallurgy, Central South University, Changsha, Hunan 410083 (China); Jin, Zhanpeng [School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083 (China)

    2013-07-25

    Highlights: •Interdiffusivities in Cu-rich fcc Cu–Al–Si alloys at 1073 K were determined. •The present results were compared with experimental data in boundary binary systems. •The present results were validated by thermodynamic constraints and Fick’s law. •The sign of ternary cross diffusivities was predicted in terms of thermodynamics. -- Abstract: Utilizing six groups of bulk diffusion couples and with electron probe microanalysis technique, the composition dependence of ternary interdiffusion coefficients in Cu-rich fcc Cu–Al–Si alloys at 1073 K were determined by the Matano-Kirkaldy method. Using a three-dimensional representation, the obtained main ternary diffusion coefficients were found to be consistent with the experimental data in boundary binaries available in the literature. The reliability of the obtained interdiffusivities was further validated by thermodynamic constraints as well as by Fick’s second law applied to numerical simulation. The sign of the ternary cross diffusivities in fcc Cu–Al–Si alloys, which shows a noticeable effect on microstructure, was also successfully predicted in terms of thermodynamics.

  20. Molecular dynamics investigation of the thermal conductivity of ternary silicon–germanium–tin alloys

    Science.gov (United States)

    Lee, Yongjin; Hwang, Gyeong S.

    2017-12-01

    A further reduction of the thermal conductivity (κ) of silicon-germanium (SiGe) alloys is indispensable for their use as thermoelectric materials. Thus far, heteroatom-doped and nanostructured SiGe systems have been mainly synthesized and tested. This work presents a possibility of reducing the κ of SiGe by alloying with tin (Sn). Our molecular dynamics simulations predict that the κ of ternary SiGeSn alloys can be 40% lower than those of binary SiGe and GeSn alloys due mainly to increased mass disorder scattering of phonons. Our findings provide insight into the mechanism of κ suppression in multielement alloys and guidance on how to design them for thermoelectric applications.

  1. Phenomena of nanotube nucleation and growth on new ternary titanium alloys.

    Science.gov (United States)

    Choe, Han-Cheol; Jeong, Yong-Hoon; Brantley, William A

    2010-07-01

    Ti-30Nb-xZr and Ti-30Ta-xNb alloys have been investigated using various methods of surface nanotube formation. Ternary Ti-30Nb-xZr (x = 3 and 15 wt%) and Ti-30Ta-xNb (x = 3 and 15 wt%) alloys were prepared by using high-purity sponge Ti (Grade 4, G&S Titanium, USA), Ta, Zr and Nb spheres. The two groups of ternary Ti alloys were prepared using a vacuum arc melting furnace. Nanotube formation was carried out with a conventional three-electrode configuration with the Ti alloy specimen, a platinum counterelectrode, and a saturated calomel (SCE) reference electrode. Experiments were performed in 1 M H3PO4 with small additions of NaF (0.1-0.8 wt%), using a potentiostat. Nanotubes formed on the surfaces of the two ternary Ti alloys were examined by field emission scanning electron microscopy, EDS and XRD. The Ti-30Ta-xZr alloys had microstructure with entirely needle-like constituents; the thickness of the needle-like alpha-phase increased as the Zr content increased. The Ti-30Nb-xZr alloys had equiaxed microstructures of the beta-phase, and increasing amounts of the needle-like alpha phase appeared at the grain boundaries of the beta-phase as the Zr content increased. The nanotubes were nucleated and grew mainly on the beta phase for the Ti-30Ta-3Zr and Ti-30Nb-3Zr alloys, which had nanotubes with uniform shape, but the nanotubes were nucleated at the alpha phase for the Ti-30Ta-15Zr and Ti-30Nb-15Zr alloys, which had nanotubes with irregular shape and diameters of two sizes. The diameter and depth of the nanotubes could be controlled, depending upon the alloy composition and composition of the surface oxide films (TiO2, Nb2O5, Ta2O5, and ZrO2). It is concluded that this research that selection of the appropriate alloying element can allow significant control of the nanotopography of these Ti alloy surfaces and that it is possible to control the surface nanotube size to promote long-term osseointegration for clinical dental or orthopedic use.

  2. Magnetic features of a mixed ferro-ferrimagnetic ternary alloy cylindrical nanowire

    Science.gov (United States)

    Vatansever, Z. D.

    2017-10-01

    In the present study, we have investigated the finite temperature magnetic phase transition properties of a mixed ferro-ferrimagnetic ternary alloy cylindrical nanowire of the type ABpC1-p by Monte Carlo simulation technique. The nanowire system consists of two interpenetrating sublattices, one of which contains type-A magnetic components with spin-3/2 and the other one is randomly occupied type-B and type-C magnetic components with spin-1 and spin-5/2, respectively. We have examined the effect of exchange interaction ratio, R, and the concentration value of type-B magnetic ions, p, on the transition temperature of the system. It has been found that one can modify the transition temperature and saturation magnetization of the system by varying concentration value and interaction ratio. Moreover, our numerical results show that the ternary alloy nanowire system exhibits compensation behavior for particular values of the system parameters.

  3. Special quasirandom structures for binary/ternary group IV random alloys

    KAUST Repository

    Chroneos, Alexander I.

    2010-06-01

    Simulation of defect interactions in binary/ternary group IV semiconductor alloys at the density functional theory level is difficult due to the random distribution of the constituent atoms. The special quasirandom structures approach is a computationally efficient way to describe the random nature. We systematically study the efficacy of the methodology and generate a number of special quasirandom cells for future use. In order to demonstrate the applicability of the technique, the electronic structures of E centers in Si1-xGex and Si1-x -yGexSny alloys are discussed for a range of nearest neighbor environments. © 2010 Elsevier B.V. All rights reserved.

  4. E centers in ternary Si1−x−yGexSny random alloys

    KAUST Repository

    Chroneos, Alexander

    2009-09-14

    Density functional theory calculations are used to study the association of arsenic (As) atoms to lattice vacancies and the formation of As-vacancy pairs, known as E centers, in the random Si0.375Ge0.5Sn0.125 alloy. The local environments are described by 32-atom special quasirandom structures that represent random Si1−x−yGexSny alloys. It is predicted that the nearest-neighbor environment will exert a strong influence on the stability of E centers in ternary Si0.375Ge0.5Sn0.125.

  5. High Permeability Ternary Palladium Alloy Membranes with Improved Sulfur and Halide Tolerances

    Energy Technology Data Exchange (ETDEWEB)

    K. Coulter

    2010-12-31

    The project team consisting of Southwest Research Institute{reg_sign} (SwRI{reg_sign}), Georgia Institute of Technology (GT), the Colorado School of Mines (CSM), TDA Research, and IdaTech LLC was focused on developing a robust, poison-tolerant, hydrogen selective free standing membrane to produce clean hydrogen. The project completed on schedule and on budget with SwRI, GT, CSM, TDA and IdaTech all operating independently and concurrently. GT has developed a robust platform for performing extensive DFT calculations for H in bulk palladium (Pd), binary alloys, and ternary alloys of Pd. Binary alloys investigated included Pd96M4 where M = Li, Na, Mg, Al, Si, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Y, Zr, Nb, Mo, Tc, Ru, Rh, Ag, Cd, In, Sn, Sb, Te, Hf, Ta, W, Re, Os, Ir, Pt, Au, Tl, Pb, Bi, Ce, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu. They have also performed a series of calculations on Pd{sub 70}Cu{sub 26}Ag{sub 4}, Pd{sub 70}Cu{sub 26}Au{sub 4}, Pd{sub 70}Cu{sub 26}Ni{sub 4}, Pd{sub 70}Cu{sub 26}Pt{sub 4}, and Pd{sub 70}Cu{sub 26}Y{sub 4}. SwRI deposited and released over 160 foils of binary and ternary Pd alloys. There was considerable work on characterizing and improving the durability of the deposited foils using new alloy compositions, post annealing and ion bombardment. The 10 and 25 {micro}m thick films were sent to CSM, TDA and IdaTech for characterization and permeation testing. CSM conducted over 60 pure gas permeation tests with SwRI binary and ternary alloy membranes. To date the PdAu and PdAuPt membranes have exhibited the best performance at temperatures in the range of 423-773 C and their performance correlates well with the predictions from GT. TDA completed testing under the Department of Energy (DOE) WGS conditions on over 16 membranes. Of particular interest are the PdAuPt alloys that exhibited only a 20% drop in flux when sulfur was added to the gas mixture and the flux was completely recovered when the sulfur flow was stopped. IdaTech tested binary

  6. Novel PdAgCu ternary alloy: Hydrogen permeation and surface properties

    Energy Technology Data Exchange (ETDEWEB)

    Tarditi, Ana M.; Braun, Fernando [Instituto de Investigaciones en Catalisis y Petroquimica (FIQ, UNL-CONICET), Santiago del Estero 2829, 3000 Santa Fe (Argentina); Cornaglia, Laura M., E-mail: lmcornag@fiq.unl.edu.ar [Instituto de Investigaciones en Catalisis y Petroquimica (FIQ, UNL-CONICET), Santiago del Estero 2829, 3000 Santa Fe (Argentina)

    2011-05-15

    Dense PdAgCu ternary alloy composite membranes were synthesized by the sequential electroless plating of Pd, Ag and Cu on top of both disk and tubular porous stainless steel substrates. X-ray diffraction and scanning electron microscopy were employed to study the structure and morphology of the tested samples. The hydrogen permeation performance of these membranes was investigated over a 350-450 deg. C temperature range and a trans-membrane pressure up to 100 kPa. After annealing at 500 deg. C in hydrogen stream followed by permeation experiments, the alloy layer presented a FCC crystalline phase with a bulk concentration of 68% Pd, 7% Ag and 25% Cu as revealed by EDS. The PdAgCu tubular membrane was found to be stable during more than 300 h on hydrogen stream. The permeabilities of the PdAgCu ternary alloy samples were higher than the permeabilities of the PdCu alloy membranes with a FCC phase. The co-segregation of silver and copper to the membrane surface was observed after hydrogen permeation experiments at high temperature as determined by XPS.

  7. Alloy multilayers and ternary nanostructures by direct-write approach

    Science.gov (United States)

    Porrati, F.; Sachser, R.; Gazzadi, G. C.; Frabboni, S.; Terfort, A.; Huth, M.

    2017-10-01

    The fabrication of nanopatterned multilayers, as used in optical and magnetic applications, is usually achieved by two independent steps, which consist in the preparation of multilayer films and in the successive patterning by means of lithography and etching processes. Here we show that multilayer nanostructures can be fabricated by using focused electron beam induced deposition (FEBID), which allows the direct writing of nanostructures of any desired shape with nanoscale resolution. In particular, {[{{{Co}}}2{{Fe}}/{{Si}}]}n multilayers are prepared by the alternating deposition from the metal carbonyl precursors, {{{HFeCo}}}3{({{CO}})}12 and {{Fe}}{({{CO}})}5, and neopentasilane, {{{Si}}}5{{{H}}}12. The ability to fabricate nanopatterned multilayers by FEBID is of interest for the realization of hyperbolic metamaterials and related nanodevices. In a second experiment, we treated the multilayers by low-energy electron irradiation in order to induce atomic species intermixing with the purpose to obtain ternary nanostructured compounds. Transmission electron microscopy and electrical transport measurements indicate that in thick multilayers, (n = 12), the intermixing is only partial, taking place mainly in the upper part of the structures. However, for thin multilayers, (n = 2), the intermixing is such that a transformation into the L21 phase of the Co2FeSi Heusler compound takes place over the whole sample volume.

  8. Correlated process of phase separation and microstructure evolution of ternary Co-Cu-Pb alloy

    Science.gov (United States)

    Yan, N.; Wang, W. L.; Luo, S. B.; Hu, L.; Wei, B.

    2013-11-01

    The phase separation and rapid solidification of liquid ternary Co45Cu42Pb13 immiscible alloy have been investigated under both bulk undercooling and containerless processing conditions. The undercooled bulk alloy is solidified as a vertical two-layer structure, whereas the containerlessly solidified alloy droplet is characterized by core-shell structures. The dendritic growth velocity of primary α(Co) phase shows a power-law relation to undercooling and achieves a maximum of 1.52 m/s at the undercooling of 112 K. The Pb content is always enriched in Cu-rich zone and depleted in Co-rich zone. Numerical analyses indicate that the Stokes motion, solutal Marangoni convection, thermal Marangoni convection, and interfacial energy play the main roles in the correlated process of macrosegregation evolution and microstructure formation.

  9. A first-principles model for anomalous segregation in dilute ternary tungsten-rhenium-vacancy alloys

    Science.gov (United States)

    Wróbel, J. S.; Nguyen-Manh, D.; Kurzydłowski, K. J.; Dudarev, S. L.

    2017-04-01

    The occurrence of segregation in dilute alloys under irradiation is a highly unusual phenomenon that has recently attracted attention, stimulated by the interest in the fundamental properties of alloys as well as by their applications. The fact that solute atoms segregate in alloys that, according to equilibrium thermodynamics, should exhibit full solubility, has significant practical implications, as the formation of precipitates strongly affects physical and mechanical properties of alloys. A lattice Hamiltonian, generalizing the so-called ‘ABV’ Ising model and including collective many-body inter-atomic interactions, has been developed to treat rhenium solute atoms and vacancies in tungsten as components of a ternary alloy. The phase stability of W-Re-vacancy alloys is assessed using a combination of density functional theory (DFT) calculations and cluster expansion (CE) simulations. The accuracy of CE parametrization is evaluated against the DFT data, and the cross-validation error is found to be less than 4.2 meV/atom. The free energy of W-Re-vacancy ternary alloys is computed as a function of temperature using quasi-canonical Monte Carlo simulations, using effective two, three and four-body interactions. In the low rhenium concentration range (<5 at. % Re), solute segregation is found to occur in the form of voids decorated by Re atoms. These vacancy-rhenium clusters remain stable over a broad temperature range from 800 K to 1600 K. At lower temperatures, simulations predict the formation of Re-rich rhenium-vacancy clusters taking the form of sponge-like configurations that contain from 30 to 50 at. % Re. The anomalous vacancy-mediated segregation of Re atoms in W can be rationalized by analyzing binding energy dependence as a function of Re to vacancy ratio as well as chemical Re-W and Re-vacancy interactions and short-range order parameters. DFT calculations show that rhenium-vacancy binding energies can be as high as 1.5 eV if the rhenium

  10. Mapping of Diffusion and Nanohardness Properties of Fcc Co-Al-V Alloys Using Ternary Diffusion Couples

    Science.gov (United States)

    Wang, Chuanyun; Xu, Guanglong; Cui, Yuwen

    2017-09-01

    Ternary diffusion behavior in Co-Al-V ternary alloys was investigated at 1373 K and 1473 K (1100 °C and 1200 °C) by the solid-state diffusion-couple technique. The extraction and interpolation of diffusion data allows the diffusion properties of Fcc Co-Al-V alloys to be mapped in the composition arrays of Al and V. A full picture of the diffusion properties was then constructed by interpolating all accessible interdiffusivities and impurity diffusivities of Co-Al binary and Co-Al-V ternary with a Redlich-Kister polynomial, in a graphic manner depicting a rapid increase of Al diffusion with increasing Al and a weak decrease with the V addition alone. Further incorporation of a nanoindentation technique enables the nanohardness property of the Co-Al-V fcc alloys to be screened in the Al and V arrays. The hardenability in the Co-Al-V alloy system has been evidenced; specifically, the alloy arrays containing higher contents of V, being solution-and-quenching processed, exhibit more effective strengthening than those with the addition of Al. The discovery of Co-Al-V alloys with comparable nanohardness but differing alloy compositions could facilitate the strengthening design of next generation Co-based alloys.

  11. Robust tribo-mechanical and hot corrosion resistance of ultra-refractory Ta-Hf-C ternary alloy films.

    Science.gov (United States)

    Yate, Luis; Coy, L Emerson; Aperador, Willian

    2017-06-08

    In this work we report the hot corrosion properties of binary and ternary films of the Ta-Hf-C system in V 2 O 5 -Na 2 SO 4 (50%wt.-50%wt.) molten salts at 700 °C deposited on AISI D3 steel substrates. Additionally, the mechanical and nanowear properties of the films were studied. The results show that the ternary alloys consist of solid solutions of the TaC and HfC binary carbides. The ternary alloy films have higher hardness and elastic recoveries, reaching 26.2 GPa and 87%, respectively, and lower nanowear when compared to the binary films. The corrosion rates of the ternary alloys have a superior behavior compared to the binary films, with corrosion rates as low as 0.058 μm/year. The combination and tunability of high hardness, elastic recovery, low nanowear and an excellent resistance to high temperature corrosion demonstrates the potential of the ternary Ta-Hf-C alloy films for applications in extreme conditions.

  12. Stability of a density-change flow in the solidification of a ternary alloy

    Science.gov (United States)

    Guba, Peter; Anderson, Daniel

    2017-11-01

    We consider phase-change driven flow and solidification of a ternary (three-component) alloy. The ternary system is characterized by the formation of two distinct mushy layers (primary and secondary), distinguished by the number of components present in their solid phases. A primary layer has the solid phase composed of a single component and, beneath the primary layer, a secondary layer has the solid phase composed of two components. Generally, the densities of the liquid, primary solid and secondary solid phases during solidification are different, and these differences give rise to a flow of the interstitial liquid. We identify four different flow regimes dependent upon whether the two solid phases shrink or expand upon solidification. The stability of this density-change flow in the absence of buoyancy is studied numerically applying a spectral method. A simple power law is employed to describe the permeability of the ternary mushy layers, with a sensitivity of permeability to changes in porosity used as the control parameter. An instability is found to occur not only in the case of expansion but also contraction, an option that is apparently unavailable for the binary case. A reduced model is derived which contains the bare essentials required to capture this instability.

  13. Morphological study of ternary Ni Cu P alloys by atomic force microscopy

    Science.gov (United States)

    Balaraju, J. N.; Anandan, C.; Rajam, K. S.

    2005-08-01

    Ternary electroless Ni-Cu-P alloy films were deposited by using nickel sulphate (B1)- and nickel chloride (B2)-based alkaline baths. Alloy films were characterized for their structure, morphology, chemical composition and microhardness. A single broad peak was obtained in XRD for both B1 and B2 films and the calculated grain sizes are 1.6 and 1.9 nm, respectively. Optical microscopic examination of the deposited coatings revealed a less nodular structure for B2-based coatings. SEM micrographs showed that films were smooth and nodular. Compositional analysis made on these deposits using EDX and the chemical state identification by XPS showed that the coatings are almost identical. AFM studies showed that the deposits from B2 bath are comparatively smoother with less nodular structure. Microhardness measurements and potentiodynamic polarization studies in 3.5% NaCl solution showed that both deposits have similar properties.

  14. Morphological study of ternary Ni-Cu-P alloys by atomic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Balaraju, J.N. [Surface Engineering Division, National Aerospace Laboratories, Post Bag No. 1779, Bangalore 560 017 (India)]. E-mail: jnbalaraju@rediffmail.com; Anandan, C. [Surface Engineering Division, National Aerospace Laboratories, Post Bag No. 1779, Bangalore 560 017 (India); Rajam, K.S. [Surface Engineering Division, National Aerospace Laboratories, Post Bag No. 1779, Bangalore 560 017 (India)

    2005-08-31

    Ternary electroless Ni-Cu-P alloy films were deposited by using nickel sulphate (B1)- and nickel chloride (B2)-based alkaline baths. Alloy films were characterized for their structure, morphology, chemical composition and microhardness. A single broad peak was obtained in XRD for both B1 and B2 films and the calculated grain sizes are 1.6 and 1.9 nm, respectively. Optical microscopic examination of the deposited coatings revealed a less nodular structure for B2-based coatings. SEM micrographs showed that films were smooth and nodular. Compositional analysis made on these deposits using EDX and the chemical state identification by XPS showed that the coatings are almost identical. AFM studies showed that the deposits from B2 bath are comparatively smoother with less nodular structure. Microhardness measurements and potentiodynamic polarization studies in 3.5% NaCl solution showed that both deposits have similar properties.

  15. Oxygen-induced Y surface segregation in a CuPdY ternary alloy

    Energy Technology Data Exchange (ETDEWEB)

    Tafen, D N.; Miller, J B.; Dogan, O N.; Baltrus, J P.; Kondratyuk, P

    2013-01-01

    We present a comprehensive theoretical and experimental study of the segregation behavior of the ternary alloy CuPdY in vacuum (i.e., the clean surface) and in the presence of oxygen. Theoretical prediction shows that for clean surface, yttrium will substitute first for Cu and then for Pd at the subsurface lattice site before segregating to the surface where it substitutes for Cu. XRD characterization of the surface of CuPdY indicates the presence of two major phases, B2 CuPd and Pd{sub 3}Y. In the presence of adsorbed oxygen, theory predicts that Y preferentially occupies surface sites due to its stronger oxygen affinity compared to Cu and Pd. XPS experiments confirm the computational results in the adsorbed oxygen case, showing that surface segregation of yttrium is induced by the formation of Y-oxides at the top-surface of the alloy.

  16. The band gap of II-Vi ternary alloys in a tight-binding description

    Energy Technology Data Exchange (ETDEWEB)

    Olguin, Daniel; Blanquero, Rafael [Instituto Politecnico Nacional, Mexico, D.F (Mexico); De Coss, Romeo [Instituto Politecnico Nacional, Yucatan (Mexico)

    2001-02-01

    We present tight-binding calculations for the band gap of II-Vi pseudobinary ternary alloys. We use an sp{sup 3} s* tight-binding Hamiltonian which include spin-orbit coupling. The band gap composition dependence is calculated using a extended version of the virtual crystal approximation, which introduce an empirical correction factor that takes into account the non-linear dependence of the band gap with the composition. The results compare quite well with the experimental data, both for the ternary alloys with wide band gap and for the narrow band gap ones. [Spanish] Presentamos el calculo de la banda de energia prohibida de aleaciones ternarias de compuestos II-VI. El calculo, que incluye interaccion espin-orbita, se hace con el metodo de enlace fuerte, utilizando una base ortogonal de cinco orbitales atomicos por atomo (sp{sup 3} s*), en conjunto con la aproximacion del cristal virtual. En la aproximacion del cristal virtual, incluimos un factor de correccion que toma en cuenta la no linealidad de la banda de energia prohibida como funcion de la concentracion. Con esta correccion nuestros resultados reproducen aceptablemente los datos experimentales hallados en la literatura.

  17. Rapid solidification mechanism of highly undercooled ternary Cu40Sn45Sb15 alloy

    Science.gov (United States)

    Zhai, W.; Wang, B. J.; Lu, X. Y.; Wei, B.

    2015-10-01

    The rapid solidification of ternary Cu40Sn45Sb15 peri-eutectic type alloy was realized by glass fluxing and drop tube methods, and the corresponding maximum undercoolings are 185 K (0.22 T L) and 321 K (0.39 T L), respectively. The phase constitution of Cu40Sn45Sb15 alloy in these two rapid solidification experiments deviates from the two equilibrium phases (Sn + Cu6Sn5). In glass fluxing method, the structural morphology of Cu40Sn45Sb15 alloy is mainly characterized by a three-layer lamellar structure, which is comprised by an inner layer of long strips of primary ɛ(Cu3Sn) phase, an intermediate layer of η(Cu6Sn5) phase and an outer layer of β(SnSb) phase. As undercooling rises, this lamellar structure is remarkably refined. When small alloy droplets are containerlessly solidified during free fall in drop tube, the primary ɛ(Cu3Sn) phase grows by non-faceted mode into dendrites as droplet diameter decreases. Especially, solidification path alters in the smallest droplet with 50 μm diameter, in which η(Cu6Sn5) and Sn3Sb2 phases form directly from the metastable liquid phase by suppressing the primary ɛ phase formation and the following peri-eutectic transformation.

  18. The thermodynamic stability induced by solute co-segregation in nanocrystalline ternary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Tao; Chen, Zheng; Zhang, Jinyong; Zhang, Ping [China Univ. of Mining and Technology, Xuzhou (China). School of Mateial Science and Engineering; Yang, Xiaoqin [China Univ. of Mining and Technology, Xuzhou (China). School of Chemical Engineering and Technology

    2017-06-15

    The grain growth and thermodynamic stability induced by solute co-segregation in ternary alloys are presented. Grain growth behavior of the single-phase supersaturated grains prepared in Ni-Fe-Pb alloy melt at different undercoolings was investigated by performing isothermal annealings at T = 400 C-800 C. Combining the multicomponent Gibbs adsorption equation and Guttmann's grain boundary segregation model, an empirical relation for isothermal grain growth was derived. By application of the model to grain growth in Ni-Fe-Pb, Fe-Cr-Zr and Fe-Ni-Zr alloys, it was predicted that driving grain boundary energy to zero is possible in alloys due to the co-segregation induced by the interactive effect between the solutes Fe/Pb, Zr/Ni and Zr/Cr. A non-linear relationship rather than a simple linear relation between 1/D* (D* the metastable equilibrium grain size) and ln(T) was predicted due to the interactive effect.

  19. Investigations of binary and ternary phase change alloys for future memory applications

    Energy Technology Data Exchange (ETDEWEB)

    Rausch, Pascal

    2012-09-13

    The understanding of phase change materials is of great importance because it enables us to predict properties and tailor alloys which might be even better suitable to tackle challenges of future memory applications. Within this thesis two topics have been approached: on the one hand the understanding of the alloy In{sub 3}Sb{sub 1}Te{sub 2} and on the other hand the so called resistivity drift of amorphous Ge-Sn-Te phase change materials. The main topic covers an in depth discussion of the ternary alloy In{sub 3}Sb{sub 1}Te{sub 2}. At first glance, this alloy does not fit into the established concepts of phase alloys: e.g. the existence of resonant bonding in the crystalline phase is not obvious and the number of p-electrons is very low compared to other phase change alloys. Furthermore amorphous phase change alloys with high indium content are usually not discussed in literature, an exception being the recent work by Spreafico et al. on InGeTe{sub 2}. For the first time a complete description of In{sub 3}Sb{sub 1}Te{sub 2} alloy is given in this work for the crystalline phase, amorphous phase and crystallization process. In addition comparisons are drawn to typical phase change materials like Ge{sub 2}Sb{sub 2}Te{sub 5}/GeTe or prototype systems like AgInTe{sub 2} and InTe. The second topic of this thesis deals with the issue of resistivity drift, i.e. the increase of resistivity of amorphous phase change alloys with aging. This drift effect greatly hampers the introduction of multilevel phase change memory devices into the market. Recently a systematic decrease of drift coefficient with stoichiometry has been observed in our group going from GeTe over Ge{sub 3}Sn{sub 1}Te{sub 4} to Ge{sub 2}Sn{sub 2}Te{sub 4}. These alloys are investigated with respect to constraint theory.

  20. Formation, Characteristics and Electrocatalytic Properties of Nanoporous Metals Formed by Dealloying of Ternary-Noble Alloys

    Science.gov (United States)

    Vega Zuniga, Adrian A.

    Nanoporous metals formed by electrochemical dealloying of silver from Ag-Au-Pt alloys, with 77 at.% silver and platinum contents of 1, 2 and 3 at.%, have been studied. The presence of platinum, which is immobile relative to gold, refine the ligament size and stabilized the nanostructure against coarsening, even under experimental conditions that would be expected to promote coarsening (e.g., exposure to high temperature, longer dealloying times). By adding only 1 at.% Pt to the alloy precursor, the ligament/pore size was reduced by 50% with respect to that in nanoporous gold (NPG), which was formed on a Ag-Au alloy with the same silver content as ternary alloys. A further decrease in the ligament size was observed by increasing the platinum content of the precursor; however, most of the improvement occurred with 1 at.% Pt. The adsorbate-induced surface segregation of platinum was also investigated for these nanoporous metals. By exposing freshly-dealloyed nanostructures to moderate temperatures in the presence of air, platinum segregated to the ligament surface; in contrast, in an inert atmosphere (Ar-H 2), platinum mostly reverted to the bulk of the ligaments. This thermally activated process was thermodynamically driven by the interaction between platinum and oxygen; however, at the desorption temperature of oxygen, platinum de-segregated from the surface. Moreover, the co-segregation of platinum and oxygen hindered the thermal coarsening of the ligaments. Finally, the electrocatalytic abilities of these nanostructures were studied towards methanol and ethanol electro-oxidation, in alkaline and acidic media, showing significantly improved response in comparison to that observed in NPG. The synergistic effect between gold and platinum atoms and the smaller feature size of the nanostructures were directly associated with this behaviour. In alkaline electrolyte, the nanostructure formed on the alloy with 1 at.% Pt showed higher catalytic response than the other two

  1. Composition Optimization of Lithium-Based Ternary Alloy Blankets for Fusion Reactors

    Science.gov (United States)

    Jolodosky, Alejandra

    The goal of this dissertation is to examine the neutronic properties of a novel type of fusion reactor blanket material in the form of lithium-based ternary alloys. Pure liquid lithium, first proposed as a blanket for fusion reactors, is utilized as both a tritium breeder and a coolant. It has many attractive features such as high heat transfer and low corrosion properties, but most importantly, it has a very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and presents plant safety concerns including degradation of the concrete containment structure. The work of this thesis began as a collaboration with Lawrence Livermore National Laboratory in an effort to develop a lithium-based ternary alloy that can maintain the beneficial properties of lithium while reducing the reactivity concerns. The first studies down-selected alloys based on the analysis and performance of both neutronic and activation characteristics. First, 3-D Monte Carlo calculations were performed to evaluate two main neutronics performance parameters for the blanket: tritium breeding ratio (TBR), and energy multiplication factor (EMF). Alloys with adequate results based on TBR and EMF calculations were considered for activation analysis. Activation simulations were executed with 50 years of irradiation and 300 years of cooling. It was discovered that bismuth is a poor choice due to achieving the highest decay heat, contact dose rates, and accident doses. In addition, it does not meet the waste disposal ratings (WDR). The straightforward approach to obtain Monte Carlo TBR and EMF results required 231 simulations per alloy and became computationally expensive, time consuming, and inefficient. Consequently, alternate methods were pursued. A collision history-based methodology recently developed for the Monte Carlo code Serpent, calculates perturbation effects on practically

  2. The dynamics of nucleation and growth of a particle in the ternary alloy melt with anisotropic surface tension.

    Science.gov (United States)

    Chen, Ming-Wen; Li, Lin-Yan; Guo, Hui-Min

    2017-08-28

    The dynamics of nucleation and growth of a particle affected by anisotropic surface tension in the ternary alloy melt is studied. The uniformly valid asymptotic solution for temperature field, concentration field, and interface evolution of nucleation and particle growth is obtained by means of the multiple variable expansion method. The asymptotic solution reveals the critical radius of nucleation in the ternary alloy melt and an inward melting mechanism of the particle induced by the anisotropic effect of surface tension. The critical radius of nucleation is dependent on isotropic surface tension, temperature undercooling, and constitutional undercooling in the ternary alloy melt, and the solute diffusion melt decreases the critical radius of nucleation. Immediately after a nucleus forms in the initial stage of solidification, the anisotropic effect of surface tension makes some parts of its interface grow inward while some parts grow outward. Until the inward melting attains a certain distance (which is defined as "the melting depth"), these parts of interface start to grow outward with other parts. The interface of the particle evolves into an ear-like deformation, whose inner diameter may be less than two times the critical radius of nucleation within a short time in the initial stage of solidification. The solute diffusion in the ternary alloy melt decreases the effect of anisotropic surface tension on the interface deformation.

  3. Onset of Hot Tearing in Ternary Mg-Al-Sr Alloy Castings

    Science.gov (United States)

    Cao, G.; Haygood, I.; Kou, S.

    2010-08-01

    Ternary Mg-Al-Sr alloys are the base of a few new creep-resistant, lightweight Mg alloys for automobiles. Hot tearing of Mg-Al-Sr alloys was studied by constrained rod casting (CRC) in a steel mold equipped with a load cell and a thermocouple. The alloys investigated included, in order of decreasing hot tearing susceptibility, Mg-4Al-1.5Sr, Mg-6Al-1.5Sr, Mg-8Al-1.5Sr, and Mg-8Al-3Sr. Two different molds were used, one for 8.7-mm-diameter rods and the other 7.9 mm. The cooling rate was varied by varying mold preheating from 523 K (250 °C) to 658 K (385 °C) and mold insulation. The load curve showed a clear peak when hot tearing occurred in all but Mg-8Al-3Sr due to its high resistance to hot tearing. From the peak and the cooling curve, the temperature at which hot tearing occurred was determined and found to decrease with increasing Al content from 4 to 8 pct. For a specific alloy, the hot tearing onset temperature did not change significantly with the rod diameter or mold preheating, at least within the experimental conditions used. The Scheil solidification model was used to estimate the fraction solid at the onset of hot tearing. It was found that hot tearing occurred near the end of primary solidification L → α (Mg) and that the fraction solid at which hot tearing occurred decreased with increasing Al content. The validity of the Scheil model was discussed.

  4. Sn-Sb-Se based binary and ternary alloys for phase change memory applications

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Kyung-Min

    2008-10-28

    In this work, the effect of replacing Ge by Sn and Te by Se was studied for a systematic understanding and prediction of new potential candidates for phase change random access memories applications. The temperature dependence of the electrical/structural properties and crystallization kinetics of the Sn-Se based binary and Sn-Sb-Se based ternary alloys were determined and compared with those of the GeTe and Ge-Sb-Te system. The temperature dependence of electrical and structural properties were investigated by van der Pauw measurements, X-ray diffraction, X-ray reflectometry. By varying the heating rate, the Kissinger analysis has been used to determine the combined activation barrier for crystallization. To screen the kinetics of crystallization, a static laser tester was employed. In case of binary alloys of the type Sn{sub x}Se{sub 1-x}, the most interesting candidate is SnSe{sub 2} since it crystallizes into a single crystalline phase and has high electrical contrast and reasonably high activation energy for crystallization. In addition, the SnSe{sub 2}-Sb{sub 2}Se{sub 3} pseudobinary alloy system also might be sufficient for data retention due to their higher transition temperature and activation energy for crystallization in comparison to GeTe-Sb{sub 2}Te{sub 3} system. Furthermore, SnSe{sub 2}-Sb{sub 2}Se{sub 3} pseudobinary alloys have a higher crystalline resistivity. The desired rapid crystallization speed can be obtained for Sn{sub 1}Sb{sub 2}Se{sub 5} and Sn{sub 2}Sb{sub 2}Se{sub 7} alloys. (orig.)

  5. Solute redistribution during phase separation of ternary Fe-Cu-Si alloy

    Science.gov (United States)

    Luo, S. B.; Wang, W. L.; Xia, Z. C.; Wu, Y. H.; Wei, B.

    2015-06-01

    Ternary Fe48Cu48Si4 immiscible alloy was rapidly solidified under the containerless microgravity condition inside a drop tube. Liquid phase separation took place in the alloy melt and led to the formation of various segregated structures. The core-shell structure consisting of Fe-rich and Cu-rich zones and the homogenously dispersed structure were the major structural morphologies. Phase field simulation results revealed that the two-layer core-shell was the final structure of liquid phase separation. The solute redistribution of liquid Fe48Cu48Si4 alloy experienced the macroscopic solute distribution induced by liquid phase separation, the secondary phase separation within the separated liquid phases and the solute trapping during rapid solidification. Energy dispersive spectroscopy analysis showed that the solute Si was enriched in the Fe-rich zone whereas depleted in the Cu-rich zone. In addition, both αFe and (Cu) phases in the Fe-rich zone exhibited a conspicuous solute trapping effect. As compared with (Cu) phase, αFe phase had a stronger affinity with solute Si.

  6. Ternary Sn-Sb-Co alloy film as new negative electrode for lithium-ion cells

    Energy Technology Data Exchange (ETDEWEB)

    Tabuchi, T. [Institute for Chemical Technology of Inorganic Materials, Technical University of Graz, Stremayrgasse 16, Graz 8010 (Austria); Graduate School of Engineering, Kyoto University, Kyotodaigaku-katsura, Nishikyo-ku, Kyoto 615-8510 (Japan); Hochgatterer, N.; Winter, M. [Institute for Chemical Technology of Inorganic Materials, Technical University of Graz, Stremayrgasse 16, Graz 8010 (Austria); Ogumi, Z. [Graduate School of Engineering, Kyoto University, Kyotodaigaku-katsura, Nishikyo-ku, Kyoto 615-8510 (Japan)

    2009-03-15

    Ternary Sn-Sb-Co alloy film was successfully prepared by the co-electroplating method using an aqueous solution bath containing SnCl{sub 2}.2H{sub 2}O, CoCl{sub 2}, SbCl{sub 3}, Na{sub 2}C{sub 4}H{sub 4}O{sub 6}.2H{sub 2}O, K{sub 3}C{sub 6}H{sub 5}O{sub 7}.H{sub 2}O, and gelatine. The alloy composition was found to be mainly controllable by the amount of Na{sub 2}C{sub 4}H{sub 4}O{sub 6}.2H{sub 2}O and SbCl{sub 3} in the plating bath. The Sn-Sb-Co film electrode with a composition of 75.4% Sn, 6.5% Sb, and 18.1% Co gave an initial discharge capacity of 380 mAh g{sup -1}. The capacity gradually increased from the 1st to the 10th cycle and was then stabilized at a larger value of 580 mAh g{sup -1}. Furthermore, the electrode was found to give better cycle performance compared to binary Sn-Co and Sn-Sb alloys. (author)

  7. Atomic mobility in a ternary liquid Ga-In-Sn alloy of the eutectic composition

    Science.gov (United States)

    Nefedov, D. Yu.; Antonenko, A. O.; Podorozhkin, D. Yu.; Uskov, A. V.; Charnaya, E. V.; Lee, M. K.; Chang, J. L.; Haase, J.; Michel, D.; Kumzerov, Yu. A.; Fokin, A. V.; Samoilovich, M. I.; Bugaev, A. S.

    2017-02-01

    The nuclear spin-lattice relaxation and Knight shift of 71Ga, 69Ga, and 115In nuclei in a ternary liquid gallium-indium-tin alloy of the eutectic composition, which was introduced into pores of an opal matrix and porous glasses with pore sizes of 18 and 7 nm, have been investigated and compared with those for the bulk melt. It has been found that longitudinal relaxation is accelerated and the Knight shift is decreased, depending on the size of pores. The correlation time of the atomic motion has been calculated for the nanostructured melt in porous matrices. It has been shown that the atomic mobility in the melt decreases with decreasing size of pores in the glasses.

  8. Ternary Bi-Cu-Ni alloys – thermodynamics, characterization, mechanical and electrical properties

    Directory of Open Access Journals (Sweden)

    Branislav Radomir Marković

    2017-09-01

    Full Text Available The Bi–Cu–Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. The paper shows results of the thermodynamic calculations using general solution model along the line with the molar ratio of Cu: Ni = 1:1. The experimental part shows thermal, structural, electrical and mechanical properties based on differential scanning calorimetry (DSC, scanning electron microscopy with energy dispersive spectrometry (SEM-EDS, electroconductivity and hardness measurements of the alloys selected in the section from bismuth corner with molar ratio Cu: Ni = 1:1, Cu: Ni = 3:1, and Cu: Ni = 1:3.

  9. Determination of thermodynamic properties of aluminum based binary and ternary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Altıntas, Yemliha [Abdullah Gül University, Faculty of Engineering, Department of Materials Science and Nanotechnology, 38039, Kayseri (Turkey); Aksöz, Sezen [Nevşehir Hacı Bektaş Veli University, Faculty of Arts and Science, Department of Physics, 50300, Nevşehir (Turkey); Keşlioğlu, Kâzım, E-mail: kesli@erciyes.edu.tr [Erciyes University, Faculty of Science, Department of Physics, 38039, Kayseri (Turkey); Maraşlı, Necmettin [Yıldız Technical University, Faculty of Chemical and Metallurgical Engineering, Department of Metallurgical and Materials Engineering, 34210, Davutpaşa, İstanbul (Turkey)

    2015-11-15

    In the present work, the Gibbs–Thomson coefficient, solid–liquid and solid–solid interfacial energies and grain boundary energy of a solid Al solution in the Al–Cu–Si eutectic system were determined from the observed grain boundary groove shapes by measuring the thermal conductivity of the solid and liquid phases and temperature gradient. Some thermodynamic properties such as the enthalpy of fusion, entropy of fusion, the change of specific heat from liquid to solid and the electrical conductivity of solid phases at their melting temperature were also evaluated by using the measured values of relevant data for Al–Cu, Al–Si, Al–Mg, Al–Ni, Al–Ti, Al–Cu–Ag, Al–Cu–Si binary and ternary alloys. - Highlights: • The microstructure of the Al–Cu–Si eutectic alloy was observed through SEM. • The three eutectic phases (α-Al, Si, CuAl{sub 2}) have been determined by EDX analysis. • Solid–liquid and solid–solid interfacial energies of α-Al solution were determined. • ΔS{sub f},ΔH{sub M}, ΔC{sub P}, electrical conductivity of solid phases for solid Al solutions were determined. • G–T coefficient and grain boundary energy of solid Al solution were determined.

  10. Liquid-liquid phase separation of freely falling undercooled ternary Fe-Cu-Sn alloy

    Science.gov (United States)

    Wang, W. L.; Wu, Y. H.; Li, L. H.; Zhai, W.; Zhang, X. M.; Wei, B.

    2015-11-01

    The active modulation and control of the liquid phase separation for high-temperature metallic systems are still challenging the development of advanced immiscible alloys. Here we present an attempt to manipulate the dynamic process of liquid-liquid phase separation for ternary Fe47.5Cu47.5Sn5 alloy. It was firstly dispersed into numerous droplets with 66 ~ 810 μm diameters and then highly undercooled and rapidly solidified under the containerless microgravity condition inside drop tube. 3-D phase field simulation was performed to explore the kinetic evolution of liquid phase separation. Through regulating the combined effects of undercooling level, phase separation time and Marangoni migration, three types of separation patterns were yielded: monotectic cell, core shell and dispersive structures. The two-layer core-shell morphology proved to be the most stable separation configuration owing to its lowest chemical potential. Whereas the monotectic cell and dispersive microstructures were both thermodynamically metastable transition states because of their highly active energy. The Sn solute partition profiles of Fe-rich core and Cu-rich shell in core-shell structures varied only slightly with cooling rate.

  11. Liquid-liquid phase separation of freely falling undercooled ternary Fe-Cu-Sn alloy

    Science.gov (United States)

    Wang, W .L.; Wu, Y. H.; Li, L. H.; Zhai, W.; Zhang, X. M.; Wei, B.

    2015-01-01

    The active modulation and control of the liquid phase separation for high-temperature metallic systems are still challenging the development of advanced immiscible alloys. Here we present an attempt to manipulate the dynamic process of liquid-liquid phase separation for ternary Fe47.5Cu47.5Sn5 alloy. It was firstly dispersed into numerous droplets with 66 ~ 810 μm diameters and then highly undercooled and rapidly solidified under the containerless microgravity condition inside drop tube. 3-D phase field simulation was performed to explore the kinetic evolution of liquid phase separation. Through regulating the combined effects of undercooling level, phase separation time and Marangoni migration, three types of separation patterns were yielded: monotectic cell, core shell and dispersive structures. The two-layer core-shell morphology proved to be the most stable separation configuration owing to its lowest chemical potential. Whereas the monotectic cell and dispersive microstructures were both thermodynamically metastable transition states because of their highly active energy. The Sn solute partition profiles of Fe-rich core and Cu-rich shell in core-shell structures varied only slightly with cooling rate. PMID:26552711

  12. Structural, mechanical and electrical properties of alloys in ternary Ag-Bi-Zn system

    Directory of Open Access Journals (Sweden)

    Minic, Duško M.

    2015-06-01

    Full Text Available Structural, mechanical and electrical properties of selected alloys in ternary Ag-Bi-Zn system are presented in this paper. Chosen alloys were investigated using X-Ray Diffraction (XRD, light optical microscopy, Scanning Electron Microscopy combined with Energy Dispersive Spectrometry (SEM-EDS, as well as by electrical conductivity and Brinell hardness measurements. Isolines of electrical conductivity and hardness for the entire Ag-Bi-Zn system were calculated using regression models.Este trabajo estudia las propiedades estructurales, mecánicas y eléctricas de aleaciones seleccionadas del sistema ternario Ag-Bi-Zn. Las aleaciones elegidas se han caracterizado por medio de difracción de rayos X, microscopía óptica, microscopía electrónica de barrido combinada con espectrometría de dispersión de energía, así como por medio de medidas de conductividad eléctrica y dureza Brinell. Por medio de modelos de regresión se han calculado las líneas de isoconductividad eléctrica y dureza para todo el sistema Ag-Bi-Zn.

  13. Contribution to the Study of the Relation between Microstructure and Electrochemical Behavior of Iron-Based FeCoC Ternary Alloys

    Directory of Open Access Journals (Sweden)

    Farida Benhalla-Haddad

    2012-01-01

    Full Text Available This work deals with the relation between microstructure and electrochemical behavior of four iron-based FeCoC ternary alloys. First, the arc-melted studied alloys were characterized using differential thermal analyses and scanning electron microscopy. The established solidification sequences of these alloys show the presence of two primary crystallization phases (δ(Fe and graphite as well as two univariante lines : peritectic L+(Fe↔(Fe and eutectic L↔(Fe+Cgraphite. The ternary alloys were thereafter studied in nondeaerated solution of 10−3 M NaHCO3 + 10−3 M Na2SO4, at 25°C, by means of the potentiodynamic technique. The results indicate that the corrosion resistance of the FeCoC alloys depends on the carbon amount and the morphology of the phases present in the studied alloys.

  14. Contribution to the Study of the Relation between Microstructure and Electrochemical Behavior of Iron-Based FeCoC Ternary Alloys

    Science.gov (United States)

    Benhalla-Haddad, Farida; Amara, Sif Eddine; Benchettara, Abdelkader; Taibi, Kamel; Kesri, Rafika

    2012-01-01

    This work deals with the relation between microstructure and electrochemical behavior of four iron-based FeCoC ternary alloys. First, the arc-melted studied alloys were characterized using differential thermal analyses and scanning electron microscopy. The established solidification sequences of these alloys show the presence of two primary crystallization phases (δ(Fe) and graphite) as well as two univariante lines : peritectic L + δ(Fe)↔γ(Fe) and eutectic L↔γ(Fe) + Cgraphite. The ternary alloys were thereafter studied in nondeaerated solution of 10−3 M NaHCO3 + 10−3 M Na2SO4, at 25°C, by means of the potentiodynamic technique. The results indicate that the corrosion resistance of the FeCoC alloys depends on the carbon amount and the morphology of the phases present in the studied alloys. PMID:22448342

  15. The structure and physical properties of CuMPd{sub 6} (M = Ti, V, Mn and Fe) ternary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ziya, A.B. [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan)], E-mail: amerziya@gmail.com; Takahashi, M.; Ohshima, K. [Institute of Materials Science, University of Tsukuba, Tsukuba 305-8573 (Japan)

    2009-06-24

    In situ X-ray diffraction and magnetic susceptibility measurements were performed to determine the structure, thermal and magnetic properties of the ternary alloys CuMPd{sub 6} (M = Ti, V, Mn and Fe). The X-ray diffraction experiments of the polycrystalline specimens annealed at 1273 K have shown that a single phase (A1-type face-centered cubic (fcc) structure) is formed at this stoichiometric composition up to a temperature of 1178 K. The integrated intensity data obtained from the diffraction experiments were utilized to determine the lattice parameters, Debye temperatures ({theta}{sub D}), the mean linear thermal expansion (MLTE) and the coefficients of thermal expansion ({alpha}(T)). The lattice parameters showed a positive deviation from the Vegard's law, whereas the Debye temperatures were found to be of the same order as for CuPd{sub 3} alloy. The contribution of the static displacements to the temperature factors was found to be nearly zero for the four alloys. The linear thermal expansion follows the classical Grueneisen relationship in these alloys. The trend of magnetic properties in these alloys was observed to be similar to that for CuMPt{sub 6} alloys (see text) i.e. paramagnetic - spin glass - ferromagnetic with the increasing atomic number of the metal M. The results have been discussed by comparing with those given in literature.

  16. Tunable fluorescence emission of ternary nonstoichiometric Ag-In-S alloyed nanocrystals

    Science.gov (United States)

    Feng, Jian; Yang, Xiurong

    2012-08-01

    Low toxic, nonstoichiometric colloidal Ag-In-S ternary quantum dots with different Ag content were synthesized by a one-pot hot-injection method based on the reaction of metal acetylacetonates with sulfur dissolved in octadecene. X-ray diffraction (XRD), transmission electron microscopy, and high-resolution transmission electron microscopy (HRTEM) were used to characterize the size, structure, and morphology of these samples. ICP-MS was employed to analyze the compositions of Ag-In-S nanocrystals. The optical properties were characterized by UV-Vis absorption, photoluminescence (PL) spectroscopy, and time-resolved photoluminescence. Varying the fraction of cationic and capping agents, the compositions of Ag-In-S nanocrystals were precisely controlled. XRD and HRTEM results indicate the compositional homogeneity of Ag-In-S. The emission spectra across the different compositions exhibiting a single bandgap feature further confirm the formation of Ag-In-S alloy NCs, rather than phase separated Ag2S and In2S3. Composition-dependent tunable PL emissions have been observed. The relative PL quantum yield is up to 16 %, which exhibited substantially enhanced comparing with the stoichiometric AgInS2 semiconductor core QDs reported in previous literature. The PL decay curve of Ag-In-S has a biexponential characteristic, which indicates that the recombination of an electron and a hole is dominated by the surface defect and the recombination process associated with internal traps is reduced significantly. The large Stokes shift between the absorption peaks and their emissions should inhibit the reabsorption and Förster energy transfer between Ag-In-S nanocrystals, which provides the alternative in the further applications where high-concentrations of nanocrystals are needed.

  17. Fullerene alloy formation and the benefits for efficient printing of ternary blend organic solar cells

    DEFF Research Database (Denmark)

    Angmo, Dechan; Bjerring, Morten; Nielsen, Niels Chr.

    2015-01-01

    with a third polymer component, the system exhibits pseudo-binary phase behaviour instead of the expected ternary phase behaviour. Our results experimentally confirm the earlier hypothesis that the unexpected composition average dependent IV-behaviour for these supposed ternary mixtures are indeed due to them...

  18. Neutronics Evaluation of Lithium-Based Ternary Alloys in IFE Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Jolodosky, A. [Univ. of California, Berkeley, CA (United States); Fratoni, M. [Univ. of California, Berkeley, CA (United States)

    2015-09-22

    , low electrical conductivity and therefore low MHD pressure drop, low chemical reactivity, and extremely low tritium inventory; the addition of sodium (FLiNaBe) has been considered because it retains the properties of FliBe but also lowers the melting point. Although many of these blanket concepts are promising, challenges still remain. The limited amount of beryllium available poses a problem for ceramic breeders such as the HCPB. FLiBe and FLiNaBe are highly viscous and have a low thermal conductivity. Lithium lead possesses a poor thermal conductivity which can cause problems in both DCLL and LiPb blankets. Additionally, the tritium permeation from these two blankets into plant components can be a problem and must be reduced. Consequently, Lawrence Livermore National Laboratory (LLNL) is attempting to develop a lithium-based alloy—most likely a ternary alloy—which maintains the beneficial properties of lithium (e.g. high tritium breeding and solubility) while reducing overall flammability concerns for use in the blanket of an inertial fusion energy (IFE) power plant. The LLNL concept employs inertial confinement fusion (ICF) through the use of lasers aimed at an indirect-driven target composed of deuterium-tritium fuel. The fusion driver/target design implements the same physics currently experimented at the National Ignition Facility (NIF). The plant uses lithium in both the primary coolant and blanket; therefore, lithium-related hazards are of primary concern. Although reducing chemical reactivity is the primary motivation for the development of new lithium alloys, the successful candidates will have to guarantee acceptable performance in all their functions. The scope of this study is to evaluate the neutronics performance of a large number of lithium-based alloys in the blanket of the IFE engine and assess their properties upon activation. This manuscript is organized as follows: Section 12 presents the models and methodologies used for the analysis; Section

  19. Quantum chemical analysis of binary and ternary ferromagnetic alloys; Quantenchemische Untersuchungen binaerer und ternaerer ferromagnetischer Legierungen

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, Yasemin Erika Charlotte

    2007-02-23

    In this work the electronic structures, densities of states, chemical bonding, magnetic exchange Parameters and Curie temperatures of binary and ternary ferromagnetic alloys are analyzed. The electronic structure of ferromagnetic MnAl has been calculated using density-functional techniques (TB-LMTO-ASA, FPLAPW) and quantum chemically analyzed by means of the crystal orbital Hamilton population analysis. The crystal structure of the ferromagnetic tetragonal MnAl may be understood to originate from the structure of nonmagnetic cubic MnAl with a CsCl motif through a two-step process. While the nonmagnetic cubic structure is stable against a structural deformation, antibonding Mn-Mn interactions at the Fermi level lead to spin polarization and the onset of magnetism, i.e., a symmetry reduction taking place solely in the electronic degrees of freedom, by that emptying antibonding Mn-Mn states. Residual antibonding Al--Al states can only be removed by a subsequent, energetically smaller structural deformation towards the tetragonal system. As a final result, homonuclear bonding is strengthened and heteronuclear bonding is weakened. Corresponding DFT calculations of the electronic structure as well as the calculation of the chemical bonding and the magnetic exchange interactions have been performed on the basis of LDA and GGA for a series of ferromagnetic full Heusler alloys of general formula Co2MnZ (Z=Ga,Si,Ge,Sn), Rh2MnZ (Z=Ge,Sn,Pb), Ni2MnZ (Z=Ga,In,Sn), Pd2MnZ (Z=Sn,Sb) and Cu2MnZ (Z=Al,In,Sn). The connection between the electronic spectra and the magnetic interactions have been studied. Correlations between the chemical bondings in Heusler alloys derived from COHP analysis and magnetic phenomena are obvious, and different mechanisms leading to spin polarization and ferromagnetism are derived. The band dependence of the exchange parameters, their dependence on volume and valence electron concentration have been thoroughly analyzed within the Green function technique

  20. X-ray diffraction study of the structure and thermal parameters of the ternary Au-Ag-Pd alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ziya, A.B. [Department of Physics, Bahauddin Zakariya University, Multan-60800 (Pakistan) and Institute of Materials Science, University of Tsukuba, Tsukuba 305-8573 (Japan)]. E-mail: amer_ziya@yahoo.com; Ohshima, K. [Institute of Materials Science, University of Tsukuba, Tsukuba 305-8573 (Japan)

    2006-11-30

    In situ X-ray diffraction experiments were performed on six samples of the ternary Au-Ag-Pd alloys (with A1 structure) having different compositions using a Cu-target. The integrated intensity data obtained in the temperature range of 373-1200K was utilized to determine the lattice parameters and the thermal parameters like Einstein's temperatures ({theta}{sub E}), the mean-square amplitudes (u{sup 2}-bar (T)) and the coefficients of thermal expansion with a high accuracy. The lattice parameter showed a small negative deviation from the Vegard's rule. It is also found that the mean-square amplitudes are independent of the static displacements. The mean-square amplitudes of vibration and the linear thermal expansion follow the classical Gruneisen relationship in these alloys.

  1. Toward Multi Principal Component Alloy Discovery: Assessment of the CALPHAD Approach for Ternary (Preprint)

    Science.gov (United States)

    2016-09-15

    phase names such as “ sigma ” or “r- phase ” were disregarded. Of the ternaries evaluated, 14% of the systems have a phase that is only present with a...principal element systems. However, the uncertainty of phase equilibria predictions within these regions is unknown. This study assesses the current...capabilities of a commercially available CALPHAD databases to accurately predict phase equilibria within ternary phase space as a function of the number

  2. Study on the Mg-Li-Zn ternary alloy system with improved mechanical properties, good degradation performance and different responses to cells

    NARCIS (Netherlands)

    Liu, Yang; Wu, Yuanhao; Bian, Dong; Gao, Shuang; Leeflang, M.A.; Guo, Hui; Zheng, Yufeng; Zhou, J.

    2017-01-01

    Novel Mg-(3.5, 6.5wt%)Li-(0.5, 2, 4wt%)Zn ternary alloys were developed as new kinds of biodegradable metallic materials with potential for stent application. Their mechanical properties, degradation behavior, cytocompatibility and hemocompatibility were studied. These potential biomaterials

  3. Nanoassembly of Polydisperse Photonic Crystals based on Binary and Ternary Polymer Opal Alloys

    CERN Document Server

    Zhao, Qibin; Schafer, Christian; Spahn, Peter; Gallei, Markus; Herrmann, Lars; Petukhov, Andrei; Baumberg, Jeremy J

    2016-01-01

    Ordered binary and ternary photonic crystals, composed of different sized polymer-composite spheres with diameter ratios up to 120%, are generated using bending induced oscillatory shearing (BIOS). This viscoelastic system creates polydisperse equilibrium structures, producing mixed opaline colored films with greatly reduced requirements for particle monodispersity, and very different sphere size ratios, compared to other methods of nano-assembly.

  4. Designing and Validating Ternary Pd Alloys for Optimum Sulfur/Carbon Resistance in Hydrogen Separation and Carbon Capture Membrane Systems Using High-Throughput Combinatorial Methods

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Amanda [Pall Corporation, Port Washington, NY (United States); Zhao, Hongbin [Pall Corporation, Port Washington, NY (United States); Hopkins, Scott [Pall Corporation, Port Washington, NY (United States)

    2014-12-01

    This report summarizes the work completed under the U.S. Department of Energy Project Award No.: DE-FE0001181 titled “Designing and Validating Ternary Pd Alloys for Optimum Sulfur/Carbon Resistance in Hydrogen Separation and Carbon Capture Membrane Systems Using High-Throughput Combinatorial Methods.” The project started in October 1, 2009 and was finished September 30, 2014. Pall Corporation worked with Cornell University to sputter and test palladium-based ternary alloys onto silicon wafers to examine many alloys at once. With the specialized equipment at Georgia Institute of Technology that analyzed the wafers for adsorbed carbon and sulfur species six compositions were identified to have resistance to carbon and sulfur species. These compositions were deposited on Pall AccuSep® supports by Colorado School of Mines and then tested in simulated synthetic coal gas at the Pall Corporation. Two of the six alloys were chosen for further investigations based on their performance. Alloy reproducibility and long-term testing of PdAuAg and PdZrAu provided insight to the ability to manufacture these compositions for testing. PdAuAg is the most promising alloy found in this work based on the fabrication reproducibility and resistance to carbon and sulfur. Although PdZrAu had great initial resistance to carbon and sulfur species, the alloy composition has a very narrow range that hindered testing reproducibility.

  5. Electronic properties of GaP{sub x}As{sub 1-x} ternary alloy: A first-principles study

    Energy Technology Data Exchange (ETDEWEB)

    Abdollahi, Arash, E-mail: arash_abdollahi60@yahoo.com; Golzan, Mir Maqsood, E-mail: m.golzan@urmia.ac.ir; Aghayar, Korosh, E-mail: k.aghayar@urmia.ac.ir

    2016-08-05

    The electronic properties of GaP{sub x}As{sub 1-x} ternary semiconductor alloy including effective band structures, density of states and effective masses were studied from first principles using supercell (SC) approach. The modified Becke–Johnson (MBJ) exchange potential together with correlation part of both the local density approximation (LDA) and M06 of Minnesota functionals were used to obtain accurate band structure profile. The effective band structures of alloys were calculated using spectral weight approach and composition dependence of the fundamental gap energy and electron effective masses were estimated from it. The results of the supercell calculations for energy gap and bowing parameters for both direct and indirect gaps are in good agreement with the experiments. The results also show that crossover point of (Γ-Γ) direct and (Γ-x) indirect gap energies occurs at x = 0.46, which is in excellent agreement with the experiments. Furthermore, our results show that the combination of MBJ exchange and M06 correlation potential can be used to estimate accurate band structure profile for GaP, GaAs and their alloys. - Highlights: • The spectral weight approach is applied to the band structure of GaP{sub x}As{sub 1-x}. • Composition dependence of the gap energy and effective masses were estimated. • Crossover point of direct and indirect gap, and bowing parameters were determined. • MBJ-M06 potential leads to accurate band structure for GaP, GaAs and their alloys.

  6. Ordering transitions of ternary alloys A(1-x)B(x)C

    Science.gov (United States)

    Newman, Kathie E.; Shen, Jun

    Alloys of the form A(1-x)B(x)C may form ordered structures for special values of the composition x. This possibility was investigated by considering alloys that have in their disordered high temperature form the zincblende crystal structure. That is, compounds that have a tetrahedral bonding of the type sp3, e.g., alloys of III-V compounds, II-VI compounds (including the diluted magnetic semiconductors), and alloys that are mixtures of the natural chalcopyrites (e.g., II-IV-V sub 2 compounds such as ZnGeAs2) with natural zincblende-structure materials were considered. Possible ordered forms of the alloys A(1-x)B(x)C include, for x = 0.5, a superlattice structure of alternating layers ACBC oriented along the (001) axis, such as was seen in the III-V compound GaAlAs2. Alternatively, for x = 0.5, alloys A(1-x)B(x)C may order in a low temperature phase as an ABC2 chalcopyrite structure, e.g., ZnGeAs2. The question of the relative stabilities of the possible ordered and disordered phases of A(1-x)B(x)C compounds was addressed by using the Kikuchi approximation. The calculations include chemical energies as well as the strain effects. Calculated phase diagrams are shown that exhibit the ordered phases of this type of alloy.

  7. Existence or absence of bandgap bowing in II-VI ternary alloys: Comparison between common-anion and common-cation cases

    Science.gov (United States)

    Tit, Nacir; Obaidat, I. M.; Reshak, A. H.; Alawadhi, H.

    2010-02-01

    The common-anion and common-cation II-VI ternary alloys of the family Cd(Zn)Se(Te) are theoretically investigated based on two different methods. Within the virtual-crystal approximation (VCA), both the sp3s*-tight-binding method, with the inclusion of spin-orbit coupling, and the first-principle full-potential linear augmented plane waves (FP-LAPW) technique are employed to determine the alloy constituents' charge states (ionicities) and degree of bond polarity. The results show that: (i) in the common-cation ternary alloys (i.e., CdSexTe1-x and ZnSexTe1-x), the anions alter a strong competition in trapping more charge. Such a competition builds up a compromised effect yielding the bowing behaviour. Whereas, (ii) in the common-anion ternary alloys (i.e., CdyZn1-yTe and CdyZn1-ySe), the absence of such competition would cause the complete absence of bandgap bowing behaviour. The variation of the bandgap is found to be rather close to linear. The obtained good agreement between our theoretical results and the recently available photoluminescence data does further corroborate our claims.

  8. Lattice Thermal Conductivity of the Binary and Ternary Group-IV Alloys Si-Sn, Ge-Sn, and Si-Ge-Sn

    Science.gov (United States)

    Khatami, S. N.; Aksamija, Z.

    2016-07-01

    Efficient thermoelectric (TE) energy conversion requires materials with low thermal conductivity and good electronic properties. Si-Ge alloys, and their nanostructures such as thin films and nanowires, have been extensively studied for TE applications; other group-IV alloys, including those containing Sn, have not been given as much attention as TEs, despite their increasing applications in other areas including optoelectronics. We study the lattice thermal conductivity of binary (Si-Sn and Ge-Sn) and ternary (Si-Ge-Sn) alloys and their thin films in the Boltzmann transport formalisms, including a full phonon dispersion and momentum-dependent boundary-roughness scattering. We show that Si-Sn alloys have the lowest conductivity (3 W /mK ) of all the bulk alloys, more than 2 times lower than Si-Ge, attributed to the larger difference in mass between the two constituents. In addition, we demonstrate that thin films offer an additional reduction in thermal conductivity, reaching around 1 W /mK in 20-nm-thick Si-Sn, Ge-Sn, and ternary Si-Ge-Sn films, which is near the conductivity of amorphous SiO2 . We conclude that group-IV alloys containing Sn have the potential for high-efficiency TE energy conversion.

  9. Solid-state reactions during mechanical alloying of ternary Fe–Al–X (X=Ni, Mn, Cu, Ti, Cr, B, Si) systems: A review

    Energy Technology Data Exchange (ETDEWEB)

    Hadef, Fatma, E-mail: hadef77@yahoo.fr [Laboratoire de Recherche sur la Physico-Chimie des Surfaces et Interfaces, LRPCSI, Université 20 Août 1955, BP 26, Route d’El-Haddaiek, Skikda 21000 (Algeria); Département de Physique, Faculté des Sciences, Université 20 Août 1955, BP 26, Route d’El-Haddaiek, Skikda 21000 (Algeria)

    2016-12-01

    The last decade has witnessed an intensive research in the field of nanocrystalline materials due to their enhanced properties. A lot of processing techniques were developed in order to synthesis these novel materials, among them mechanical alloying or high-energy ball milling. In fact, mechanical alloying is one of the most common operations in the processing of solids. It can be used to quickly and easily synthesize a variety of technologically useful materials which are very difficult to manufacture by other techniques. One advantage of MA over many other techniques is that is a solid state technique and consequently problems associated with melting and solidification are bypassed. Special attention is being paid to the synthesis of alloys through reactions mainly occurring in solid state in many metallic ternary Fe–Al–X systems, in order to improve mainly Fe–Al structural and mechanical properties. The results show that nanocrystallization is the common result occurring in all systems during MA process. The aim of this work is to illustrate the uniqueness of MA process to induce phase transformation in metallic Fe–Al–X (X=Ni, Mn, Cu, Ti, Cr, B, Si) systems. - Highlights: • A review of state of the art on binary Fe–Al alloys was presented. • Structural and microstructural properties of MA ternary Fe–Al–X alloys were summerized. • MA process is a powerful tool for producing metallic alloys at the nanometer scale.

  10. Study on the Mg-Li-Zn ternary alloy system with improved mechanical properties, good degradation performance and different responses to cells.

    Science.gov (United States)

    Liu, Yang; Wu, Yuanhao; Bian, Dong; Gao, Shuang; Leeflang, Sander; Guo, Hui; Zheng, Yufeng; Zhou, Jie

    2017-10-15

    Novel Mg-(3.5, 6.5wt%)Li-(0.5, 2, 4wt%)Zn ternary alloys were developed as new kinds of biodegradable metallic materials with potential for stent application. Their mechanical properties, degradation behavior, cytocompatibility and hemocompatibility were studied. These potential biomaterials showed higher ultimate tensile strength than previously reported binary Mg-Li alloys and ternary Mg-Li-X (X=Al, Y, Ce, Sc, Mn and Ag) alloys. Among the alloys studied, the Mg-3.5Li-2Zn and Mg-6.5Li-2Zn alloys exhibited comparable corrosion resistance in Hank's solution to pure magnesium and better corrosion resistance in a cell culture medium than pure magnesium. Corrosion products observed on the corroded surface were composed of Mg(OH) 2 , MgCO 3 and Ca-free Mg/P inorganics and Ca/P inorganics. In vitro cytotoxicity assay revealed different behaviors of Human Umbilical Vein Endothelial Cells (HUVECs) and Human Aorta Vascular Smooth Muscle Cells (VSMCs) to material extracts. HUVECs showed increasing nitric oxide (NO) release and tolerable toxicity, whereas VSMCs exhibited limited decreasing viability with time. Platelet adhesion, hemolysis and coagulation tests of these Mg-Li-Zn alloys showed different degrees of activation behavior, in which the hemolysis of the Mg-3.5Li-2Zn alloy was lower than 5%. These results indicated the potential of the Mg-Li-Zn alloys as good candidate materials for cardiovascular stent applications. Mg-Li alloys are promising as absorbable metallic biomaterials, which however have not received significant attention since the low strength, controversial corrosion performance and the doubts in Li toxicity. The Mg-Li-Zn alloy in the present study revealed much improved mechanical properties higher than most reported binary Mg-Li and ternary Mg-Li-X alloys, with superior corrosion resistance in cell culture media. Surprisingly, the addition of Li and Zn showed increased nitric oxide release. The present study indicates good potential of Mg-Li-Zn alloy as

  11. Neutronics Evaluation of Lithium-Based Ternary Alloys in IFE Blankets

    Energy Technology Data Exchange (ETDEWEB)

    Jolodosky, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fratoni, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-11-20

    Pre-conceptual fusion blanket designs require research and development to reflect important proposed changes in the design of essential systems, and the new challenges they impose on related fuel cycle systems. One attractive feature of using liquid lithium as the breeder and coolant is that it has very high tritium solubility and results in very low levels of tritium permeation throughout the facility infrastructure. However, lithium metal vigorously reacts with air and water and presents plant safety concerns. If the chemical reactivity of lithium could be overcome, the result would have a profound impact on fusion energy and associated safety basis. The overriding goal of this project is to develop a lithium-based alloy that maintains beneficial properties of lithium (e.g. high tritium breeding and solubility) while reducing overall flammability concerns. To minimize the number of alloy combinations that must be explored, only those alloys that meet certain nuclear performance metrics will be considered for subsequent thermodynamic study. The specific scope of this study is to evaluate the neutronics performance of lithium-based alloys in the blanket of an inertial confinement fusion (ICF) engine. The results of this study will inform the development of lithium alloys that would guarantee acceptable neutronics performance while mitigating the chemical reactivity issues of pure lithium.

  12. Magnetic transition induced by mechanical deformation in Fe{sub 60}Al{sub 40−x}Si{sub x} ternary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Legarra, E., E-mail: estibaliz.legarra@ehu.es [Dpto. Electricidad y Electronica, Universidad del Pais Vasco (UPV/EHU), CP. 644, 48080 Bilbao (Spain); Apiñaniz, E. [Dpto. Fisica Aplicada I, Universidad del Pais Vasco, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Plazaola, F. [Dpto. Electricidad y Electronica, Universidad del Pais Vasco (UPV/EHU), CP. 644, 48080 Bilbao (Spain); Jimenez, J.A. [Centro Nacional de Investigaciones Metalurgicas (CENIM), Avda. Gregorio del amo 8, 28040 Madrid (Spain)

    2014-02-15

    Highlights: • Fe{sub 60}Al{sub 40−x}Si{sub x} alloys were disordered by means of planetary ball milling technique. • Paramagnetic to ferromagnetic transition is observed with disordering. • Si addition hinders the disordering process and the increase of the lattice parameter. • Si addition promotes the paramagnetic to ferromagnetic transition. -- Abstract: We have used Mössbauer spectroscopy and X-ray diffraction to study the influence of different Al/Si ratios on the structural and magnetic properties of the mechanically deformed Fe{sub 60}Al{sub 40−x}Si{sub x} alloys. The results indicate that ternary alloys also present the magnetic transition with disordering observed in binary Fe{sub 60}Al{sub 40} alloys. Besides, Si introduction has two opposite contributions. From a structural point of view, hinders the disordering process, but, from a magnetic point of view promotes the magnetic transition.

  13. Investigation of solidification behavior of the Sn-rich ternary Sn–Bi–Zn alloys

    Directory of Open Access Journals (Sweden)

    S Mladenović

    2017-03-01

    Full Text Available Solidification properties and microstructure of six as-cast Sn–Bi–Zn alloys with 80 at.% of Sn and variable contents of Bi and Zn were experimentally investigated using the scanning electron microscopy (SEM with energy-dispersive X-ray spectroscopy (EDS and differential scanning calorimetry (DSC. The experimentally obtained results were compared with predicted phase equilibria according to the calculation of phase diagram (CALPHAD method and by the Scheil solidification simulation.

  14. Precipitation kinetics in binary Fe–Cu and ternary Fe–Cu–Ni alloys via kMC method

    Directory of Open Access Journals (Sweden)

    Yi Wang

    2017-08-01

    Full Text Available The precipitation kinetics of coherent Cu rich precipitates (CRPs in binary Fe–Cu and ternary Fe–Cu–Ni alloys during thermal aging was modelled by the kinetic Monte Carlo method (kMC. A good agreement of the precipitation kinetics of Fe–Cu was found between the simulation and experimental results, as observed by means of advancement factor and cluster number density. This agreement was obtained owing to the correct description of the fast cluster mobility. The simulation results indicate that the effects of Ni are two-fold: Ni promotes the nucleation of Cu clusters; while the precipitation kinetics appears to be delayed by Ni addition during the coarsening stage. The apparent delayed precipitation kinetics is revealed to be related with the cluster mobility, which are reduced by Ni addition. The reduction effect of the cluster mobility weakens when the CRPs sizes increase. The results provide a view angle on the effects of solute elements upon Cu precipitation kinetics through the consideration of the non-conventional cluster growth mechanism, and kMC is verified to be a powerful approach on that.

  15. Atomistic modeling of ternary additions to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt and Ni-Ti-Hf shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mosca, H.O., E-mail: hmosca@cnea.gov.ar [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Bozzolo, G. [Loyola University Maryland, 4501 N. Charles St., Baltimore, MD 21210 (United States); Grosso, M.F. del [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Consejo Nacional de Investigaciones Cientificas y Tecnicas, CONICET (Argentina)

    2012-08-15

    The behavior of ternary and quaternary additions to NiTi shape memory alloys is investigated using a quantum approximate method for the energetics. Ternary additions X to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt, and Ni-Ti-Hf alloys, for X=Au, Pt, Ir, Os, Re, W, Ta,Ag, Pd, Rh, Ru, Tc, Mo, Nb, Zr, Zn, Cu, Co, Fe, Mn, V, Sc, Si, Al and Mg are considered. Bulk properties such as lattice parameter, energy of formation, and bulk modulus of the B2 alloys are studied for variations due to the presence of one or two simultaneous additives.

  16. Measurement of Hydrogen Absorption in Ternary Alloys with Volumetric (Sieverts Loop) Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Aceves, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-10-26

    The Sieverts loop is an inexpensive, robust and reliable methodology for calculating hydrogen absorption in materials [1]. In this approach, we start by storing a sample of the material being tested in the volume Vcell (Figure 1) and initiate the process by producing a high vacuum in the system while the material sample is heated to eliminate (most of) the hydrogen and other impurities previously absorbed. The system typically operates isothermally, with the volume Vref at ambient temperature and the sample at a temperature of interest – high enough to liquefy the alloy for the current application to nuclear fusion.

  17. Band gap characterization of ternary BBi1-xNx (0≤x≤1) alloys using modified Becke-Johnson (mBJ) potential

    Science.gov (United States)

    Yalcin, Battal G.

    2015-04-01

    The semi-local Becke-Johnson (BJ) exchange-correlation potential and its modified form proposed by Tran and Blaha have attracted a lot of interest recently because of the surprisingly accurate band gaps they can deliver for many semiconductors and insulators (e.g., sp semiconductors, noble-gas solids, and transition-metal oxides). The structural and electronic properties of ternary alloys BBi1-xNx (0≤x≤1) in zinc-blende phase have been reported in this study. The results of the studied binary compounds (BN and BBi) and ternary alloys BBi1-xNx structures are presented by means of density functional theory. The exchange and correlation effects are taken into account by using the generalized gradient approximation (GGA) functional of Wu and Cohen (WC) which is an improved form of the most popular Perdew-Burke-Ernzerhof (PBE). For electronic properties the modified Becke-Johnson (mBJ) potential, which is more accurate than standard semi-local LDA and PBE calculations, has been chosen. Geometric optimization has been implemented before the volume optimization calculations for all the studied alloys structure. The obtained equilibrium lattice constants of the studied binary compounds are in coincidence with experimental works. And, the variation of the lattice parameter of ternary alloys BBi1-xNx almost perfectly matches with Vegard's law. The spin-orbit interaction (SOI) has been also considered for structural and electronic calculations and the results are compared to those of non-SOI calculations.

  18. EIS and XPS investigations on the corrosion mechanism of ternary Zn-Co-Mo alloy coatings in NaCl solution

    Science.gov (United States)

    Winiarski, J.; Tylus, W.; Szczygieł, B.

    2016-02-01

    The changes in composition of the corrosion products of electrodeposited ternary Zn-Co-Mo alloy coatings on AISI 1015 steel during exposure to 0.5 mol dm-3 NaCl solution were investigated. XPS studies demonstrated that at the initial stage of corrosion on the surface of Zn-Co-Mo coating zinc hydroxide layer is formed. Hydroxyl groups react with chloride and carbonate ions which lead to the formation of zinc hydroxy carbonates and zinc hydroxy chlorides. The share of these compounds in the oxidation products is initially large. However, with time zinc hydroxy compounds slowly changes to zinc oxide, which is more stable corrosion product. It was estimated that after 24 h of exposure to NaCl solution nearly 60% of zinc detected on the surface of Zn-Co-Mo coating was present in the ZnO form, 18% in the form of zinc hydroxy chloride, and more than 21% as zinc hydroxy carbonate. XPS analyses revealed that the amount of zinc hydroxy chloride increases as the exposure time lengthens and it is significantly higher than at the surface of binary Zn-Co coating. The presence of crystalline zinc chloride hydroxide as a stable product of corrosion of ternary Zn-Co-Mo alloy coating in a 0.5 mol dm-3 NaCl solution was confirmed by XRD analysis. According to XRD and FTIR other zinc corrosion products like: ZnO, Zn(OH)2 and Zn5(CO3)2(OH)6 were also present. The results of XPS and EIS measurements allow us to assume that in the presence of Mo in the alloy, on the surface of ternary Zn-Co-Mo alloy (3.4 wt.% Co, 2.7 wt.% Mo) coating more zinc hydroxy chloride is formed, which favors higher corrosion resistance of this coating.

  19. Compositional bowing of band energies and their deformation potentials in strained InGaAs ternary alloys: A first-principles study

    Energy Technology Data Exchange (ETDEWEB)

    Khomyakov, Petr A.; Luisier, Mathieu; Schenk, Andreas [Integrated Systems Laboratory, Department of Information Technology and Electrical Engineering, ETH Zurich, Gloriastrasse 35, 8092 Zurich (Switzerland)

    2015-08-10

    Using first-principles calculations, we show that the conduction and valence band energies and their deformation potentials exhibit a non-negligible compositional bowing in strained ternary semiconductor alloys such as InGaAs. The electronic structure of these compounds has been calculated within the framework of local density approximation and hybrid functional approach for large cubic supercells and special quasi-random structures, which represent two kinds of model structures for random alloys. We find that the predicted bowing effect for the band energy deformation potentials is rather insensitive to the choice of the functional and alloy structural model. The direction of bowing is determined by In cations that give a stronger contribution to the formation of the In{sub x}Ga{sub 1−x}As valence band states with x ≳ 0.5, compared to Ga cations.

  20. Phase separation in ternary system of Ni{sub 3}Mn{sub x}Al{sub 1−x} alloys

    Energy Technology Data Exchange (ETDEWEB)

    Volkova, N.V., E-mail: nvolkova@imp.uran.ru [M.N. Miheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences, ul. S. Kovalevskoi 18, Ekaterinburg 620137 (Russian Federation); Kourov, N.I. [M.N. Miheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences, ul. S. Kovalevskoi 18, Ekaterinburg 620137 (Russian Federation); Marchenkov, V.V. [M.N. Miheev Institute of Metal Physics, Ural Branch, Russian Academy of Sciences, ul. S. Kovalevskoi 18, Ekaterinburg 620137 (Russian Federation); Ural Federal University, 620002 Ekaterinburg (Russian Federation)

    2016-03-01

    The concentration dependence of the resistance of the alloys of Ni{sub 3}Mn{sub x}Al{sub 1−x} system is described in the framework of the percolation theory in the model of an effective medium. The regions corresponding to the alloys of terminal compositions are present in the entire volume of the samples. The formation of an infinite cluster occurs near the percolation threshold x=0.3 for the phase of the Ni{sub 3}Al and x=0.7 for the phase of the Ni{sub 3}Mn type. This makes it possible to suppose that in the ternary Ni{sub 3}Mn{sub x}Al{sub 1−x} alloys in the intermediate region of concentrations there is realized an inhomogeneous heterophase structure.

  1. Structural and optoelectronic properties of BxAl1-xSb ternary alloys: first principles calculations

    Science.gov (United States)

    Benchehima, Miloud; Abid, Hamza; Chaouche, Abdallah Chabane; Resfa, Abbes

    2017-03-01

    In this paper, the full potential linearized augmented plane wave (FP-LAPW) formalism based on density functional theory (DFT) has been performed. To study the structural properties of BxAl1-xSb at different boron concentrations x (0 ≤ x ≤ 1), we have used the local density approximation (LDA) and the generalized gradient approximation of Wu and Cohen (GGA-WC). The phase stability of AlSb and BSb binary compounds in zinc-blend and rock salt phases has been investigated. The equilibrium lattice constant (a), bulk modulus (B) and pressure derivative of bulk modulus B' have been evaluated in both phases. We observe a small deviation from the linear concentration dependence (LCD) of the lattice constant parameter, while an important deviation of bulk modulus from "LCD" has been remarked. We have compared the results obtained to the available theoretical and experimental data for the binaries. The optoelectronic properties of BxAl1-xSb are studied in the most stable determined phase. In addition to the "GGA-WC", the GGA of Engel and Vosko, and the recent developed Tran-Blaha-modified Becke-Johnson (TB-mBJ) schemes were used to study the electronic properties of BxAl1-xSb ternary alloys. It is found that the band gap of BxAl1-xSb vary non-linearly with the boron concentrations, giving a negative deviation from Vegard's law. In addition, the optical properties such as the dielectric function, complex refractive index, absorption coefficient, optical conductivity and absorption coefficient are discussed in detail.

  2. Study on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy

    Directory of Open Access Journals (Sweden)

    Liming Liu

    2014-02-01

    Full Text Available Based on the idea of alloying welding seams, a series of Zn–xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded joints were improved with the increasing of the Al content in the Zn–xAl filler metals, and when Zn–30Al was used as the filler metal, the ultimate tensile strength could reach a maximum of 120 MPa. The reason for the average tensile strength of the joint increasing was that the weak zone of the joint using Zn–30Al filler metal was generated primarily by α-Al instead of MgZn2. When Zn–40Al was used as the filler metal, a new transition zone, about 20 μm-wide, appeared in the edge of the fusion zone near the Mg base metal. Due to the transition zones consisting of MgZn2- and Al-based solid solution, the mechanical property of the joints was deteriorated.

  3. Macrosegregation in horizontal direct chill casting of ternary Al alloys: Investigation of solid motion

    Science.gov (United States)

    Vušanović, I.; Krane, M. J. M.

    2012-01-01

    Macrosegregation in direct chill casting processes is controlled by fluid flow due to the thermosolutal natural and forced convection, shrinkage, and transport of unattached solid grains. Because grain refinement is usually used in aluminum direct chill casting, some effort must be made to model free-floating solid grains, and their attachment to a rigid mushy zone. Criteria for attachment vary, but many are based on using a critical solid packing fraction, which is treated as uniform and constant throughout the domain. In the case of horizontal casting (HDC), gravity acts perpendicularly to the casting direction, and the assumption of a uniform packing fraction cannot be applied because the solid particles attach to some surfaces by settling and others by being swept into the rigid solid from below. In this simulation of HDC casting of an Al-Cu-Mg alloy, the rigid and unattached solid is tracked separately, and a rule set is developed to determine the attachment of free-floating solid. Comparison between cases with and without unattached solid movement shows qualitatively different results, particularly in bottom part of slab. Non-uniform packing fractions cause very different segregation patterns in the lower half of the ingot compared to the cases with no solid movement, less segregation near centerline compared to uniform packing fraction cases, and positive segregation near the place where inlet jet impinges on the mushy zone.

  4. Determination of solid-liquid interfacial energies in the In-Bi-Sn ternary alloy

    Energy Technology Data Exchange (ETDEWEB)

    Akbulut, S; Ocak, Y [Department of Physics, Institute of Science and Technology, Erciyes University, Kayseri, 38039 (Turkey); Marasli, N; Keslioglu, K [Department of Physics, Faculty of Arts and Sciences, Erciyes University, Kayseri, 38039 (Turkey); Kaya, H [Department of Science Education, Education Faculty, Erciyes University, Kayseri, 38039 (Turkey); Cadirli, E [Department of Physics, Faculty of Arts and Sciences, Nigde University, Nigde (Turkey)], E-mail: marasli@erciyes.edu.tr

    2008-09-07

    The equilibrated grain boundary groove shapes of solid In{sub 2}Bi solution in equilibrium with the In-Bi-Sn eutectic liquid were observed from a quenched sample at 59 {sup 0}C. The Gibbs-Thomson coefficient, solid-liquid interfacial energy and grain boundary energy of the solid In{sub 2}Bi solution have been determined to be (1.42 {+-} 0.07) x 10{sup -7} K m, (49.6 {+-} 5.0) x 10{sup -3} J m{sup -2} and (97.1 {+-} 10.7) x 10{sup -3} J m{sup -2}, respectively, from the observed grain boundary groove shapes. The thermal conductivities of the solid phases for In-21.23 at% Bi-19.04 at% Sn and In-30.5 at% Bi-3 at% Sn alloys and the thermal conductivity ratio of the liquid phase to the solid phase for In-21.23 at% Bi-19.04 at% Sn have also been measured with a radial heat flow apparatus and a Bridgman type growth apparatus, respectively, at their melting temperature.

  5. Device Fabrication using Crystalline CdTe and CdTe Ternary Alloys Grown by MBE

    Energy Technology Data Exchange (ETDEWEB)

    Zaunbrecher, Katherine; Burst, James; Seyedmohammadi, Shahram; Malik, Roger; Li, Jian V.; Gessert, Timothy A.; Barnes, Teresa

    2015-06-14

    We fabricated epitaxial CdTe:In/CdTe:As homojunction and CdZnTe/CdTe and CdMgTe/CdTe heterojunction devices grown on bulk CdTe substrates in order to study the fundamental device physics of CdTe solar cells. Selection of emitter-layer alloys was based on passivation studies using double heterostructures as well as band alignment. Initial results show significant device integration challenges, including low dopant activation, high resistivity substrates and the development of low-resistance contacts. To date, the highest open-circuit voltage is 715 mV in a CdZnTe/CdTe heterojunction following anneal, while the highest fill factor of 52% was attained in an annealed CdTe homojunction. In general, all currentvoltage measurements show high series resistance, capacitancevoltages measurements show variable doping, and quantum efficiency measurements show low collection. Ongoing work includes overcoming the high resistance in these devices and addressing other possible device limitations such as non-optimum junction depth, interface recombination, and reduced bulk lifetime due to structural defects.

  6. Magnetic properties of the ternary alloy system (FexNi1-x)11Se8 for 0.042

    Science.gov (United States)

    Sharma, Y. K.

    1990-07-01

    The ternary alloy system (FexNi1-x)11Se8 for 0.042

  7. Ab-initio study of structural, elastic, electronic and thermodynamic properties of BaxSr1−xS ternary alloys

    Directory of Open Access Journals (Sweden)

    Chelli S.

    2015-12-01

    Full Text Available The structural, elastic, electronic and thermodynamic properties of BaxSr1−xS ternary alloys have been investigated using the full-potential (linearized augmented plane wave method. The ground state properties, such as lattice constant, bulk modulus and elastic constants, are in good agreement with numerous experimental and theoretical data. The dependence of the lattice parameters, bulk modulus and band gap on the composition x was analyzed. Deviation of the lattice constant from Vegard’s law and the bulk modulus from linear concentration dependence (LCD was observed. The microscopic origins of the gap bowing were explained by using the approach of Zunger et al. The thermodynamic stability of BaxSr1−xS alloy was investigated by calculating the excess enthalpy of mixing, ΔHm and the calculated phase diagram showed a broad miscibility gap with a critical temperature.

  8. Influence of ternary elements (X = Si, B, Cr) on TiAlN coating deposited by magnetron sputtering process with single alloying targets

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Duck Hyeong [Korea Institute of Industrial Technology, Heat and Surface Technology Service Center, Incheon, 426-791 (Korea, Republic of); Department of Materials Engineering, Hanyang University, Gyeonggi-do, 426-791 (Korea, Republic of); Moon, Kyoung Il; Shin, Seung Yong [Korea Institute of Industrial Technology, Heat and Surface Technology Service Center, Incheon, 426-791 (Korea, Republic of); Lee, Caroline Sunyong, E-mail: sunyonglee@hanyang.ac.kr [Department of Materials Engineering, Hanyang University, Gyeonggi-do, 426-791 (Korea, Republic of)

    2013-11-01

    Ti–Al based single alloying targets were prepared by mechanical alloying and spark plasma sintering. Also, Si, B, and Cr added targets were prepared to improve wear and corrosion properties. The investigation on the alloying targets showed that their microstructures were about 20–30 nm in size and all the elements were homogeneously distributed. Ternary Ti–Al-based coatings were deposited by magnetron sputtering method with various alloying targets, such as TiAlSi, TiAlB and TiAlCr. The composition of the coating was almost the same with that of the target. Their microstructures and mechanical properties were investigated by X-ray diffractometer, field emission scanning electron microscope, nano-indenter, tribometer and etc. Moreover, effects of 3rd element on the wear and corrosion properties of Ti–Al–N based coatings were studied here. From the results of TiAlN-X coating properties, the sample coated with TiAlN-B showed the highest hardness. Moreover, TiAlN-Cr coatings showed the best friction coefficient in oil condition and best corrosion resistance with the lowest corrosion current density. Therefore, easy method of coating TiAlN with ternary element using single target, was demonstrated as well as its improved structural properties. - Highlights: • Improve properties of TiAlN coatings by adding third elements such as Si, B, and Cr • TiAlN-B coatings showed the highest hardness. • TiAlN-Cr coatings showed the best friction coefficient in oil condition. • TiAlN-Cr coatings showed the best corrosion resistance.

  9. A Platinum Monolayer Core-Shell Catalyst with a Ternary Alloy Nanoparticle Core and Enhanced Stability for the Oxygen Reduction Reaction

    Directory of Open Access Journals (Sweden)

    Haoxiong Nan

    2015-01-01

    Full Text Available We synthesize a platinum monolayer core-shell catalyst with a ternary alloy nanoparticle core of Pd, Ir, and Ni. A Pt monolayer is deposited on carbon-supported PdIrNi nanoparticles using an underpotential deposition method, in which a copper monolayer is applied to the ternary nanoparticles; this is followed by the galvanic displacement of Cu with Pt to generate a Pt monolayer on the surface of the core. The core-shell Pd1Ir1Ni2@Pt/C catalyst exhibits excellent oxygen reduction reaction activity, yielding a mass activity significantly higher than that of Pt monolayer catalysts containing PdIr or PdNi nanoparticles as cores and four times higher than that of a commercial Pt/C electrocatalyst. In 0.1 M HClO4, the half-wave potential reaches 0.91 V, about 30 mV higher than that of Pt/C. We verify the structure and composition of the carbon-supported PdIrNi nanoparticles using X-ray powder diffraction, X-ray photoelectron spectroscopy, thermogravimetry, transmission electron microscopy, and energy dispersive X-ray spectrometry, and we perform a stability test that confirms the excellent stability of our core-shell catalyst. We suggest that the porous structure resulting from the dissolution of Ni in the alloy nanoparticles may be the main reason for the catalyst’s enhanced performance.

  10. Effects of varying indium composition on the thermoelectric properties of In{sub x}Ga{sub 1-x}Sb ternary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Nirmal Kumar, V.; Hayakawa, Y. [Shizuoka University, Graduate School of Science and Technology, Hamamatsu (Japan); Shizuoka University, Research Institute of Electronics, Hamamatsu, Shizuoka (Japan); Arivanandan, M. [Anna University, Centre for Nanoscience and Technology, Chennai (India); Koyoma, T. [Shizuoka University, Research Institute of Electronics, Hamamatsu, Shizuoka (Japan); Udono, H. [Ibaraki University, Faculty of Engineering, Hitachi (Japan); Inatomi, Y. [Japan Aerospace Exploration Agency, Institute of Space and Astronautical Science, Sagamihara (Japan); SOKENDAI (The Graduate University for Advanced Studies), School of Physical Sciences, Sagamihara (Japan)

    2016-10-15

    In{sub x}Ga{sub 1-x}Sb (x = 0-1), a III-V ternary alloy, was grown by melt solidification process. The effects of varying indium composition on the thermoelectric properties of In{sub x}Ga{sub 1-x}Sb polycrystals were studied for the first time. The segregations of indium and gallium elements were observed in the grown crystals, and the defects present in crystals were revealed by etching process. Room-temperature Raman measurement revealed that the dominant optical modes of phonon vibrations in InSb and GaSb binaries were suppressed in In{sub x}Ga{sub 1-x}Sb ternaries. The in-phase vibrations of acoustic mode phonons were scattered more effectively in In{sub x}Ga{sub 1-x}Sb by the present defects, and the relative value of lattice thermal conductivity was reduced. Thus, the thermal conductivity of InSb and GaSb binaries was drastically reduced in In{sub x}Ga{sub 1-x}Sb by alloy scattering. InSb indicated the highest ZT 0.51 because of its higher power factor 70 μW/cm K{sup 2}. Next to InSb, In{sub 0.8}Ga{sub 0.2}Sb had higher ZT value of 0.29 at 600 K among the In{sub x}Ga{sub 1-x}Sb ternaries. The ZT of In{sub 0.8}Ga{sub 0.2}Sb was increased about 30 times than that of GaSb by the increase of power factor as well as the decrease of thermal conductivity. (orig.)

  11. First-principles study on half-metallic ferromagnetic properties of Zn{sub 1-x}V{sub x}Se ternary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Khatta, Swati; Tripathi, S.K.; Prakash, Satya [Panjab University, Central of Advanced Study in Physics, Department of Physics, Chandigarh (India)

    2017-09-15

    The spin-polarised density functional theory along with self-consistent plane-wave pseudopotential is used to investigate the half-metallic ferromagnetic properties of ternary alloys Zn{sub 1-x}V{sub x}Se. The generalized gradient approximation is used for exchange-correlation potential. The equilibrium lattice constants, bulk modulus, and its derivatives are calculated. The calculated spin-polarised energy-band structures reveal that these alloys are half-metallic for x = 0.375 and 0.50 and nearly half-metallic for other values of x. The estimated direct and indirect bandgaps may be useful for the magneto-optical absorption experiments. It is found that there is strong Zn 4s, Se 4p, and V 3d orbital hybridization in the conduction bands of both the spins, while Se 4p and V 3d orbital hybridization predominates in the valence bands of both the spins. The s, p-d, and p-d orbital hybridization reduces the local magnetic moment of V atoms and small local magnetic moments are produced on Zn and Se atoms which get coupled with V atoms in ferromagnetic and antiferromagnetic phases, respectively. The conduction and valence-band-edge splittings and exchange constants predict the ferromagnetism in these alloys. The conduction band-impurity (s and p-d) exchange interaction is more significant for ferromagnetism in these alloys than the valence band-impurity (p-d) exchange interaction. (orig.)

  12. Experimental investigations and phase-field simulations of triple-phase-separation kinetics within liquid ternary Co-Cu-Pb immiscible alloys.

    Science.gov (United States)

    Wu, Y H; Wang, W L; Yan, N; Wei, B

    2017-05-01

    The phase-separation kinetics and microstructure evolution mechanisms of liquid ternary Co_{43}Cu_{40}Pb_{17} immiscible alloys are investigated by both the drop tube technique and phase-field method. Two successive phase separations take place during droplet falling and lead to the formation of a three-phase three-layer core-shell structure composed of a Co-rich core, a Cu-rich middle layer, and a Pb-rich shell. The Pb-rich shell becomes more and more conspicuous as droplet diameter decreases. Meanwhile, the Co-rich core center gradually moves away from the core-shell center. Theoretical analyses show that a larger temperature gradient inside a smaller alloy droplet induces the accelerated growth of the surface segregation shell during triple-phase separation. The residual Stokes motion and the asymmetric Marangoni convection result in the appearance of an eccentric Co-rich core and the core deviation degree is closely related to the droplet size and initial velocity. A three-dimensional phase-field model of ternary immiscible alloys, which considers the successive phase separations under the combined effects of Marangoni convection and surface segregation, is proposed to explore the formation mechanisms of three-phase core-shell structures. The simulated core-shell morphologies are consistent with the experimental observations, which verifies the model's validity in reproducing the core-shell dynamic evolution. Numerical results reveal that the development of three-phase three-layer core-shell structures can be attributed to the primary and then secondary phase separations dominated simultaneously by Marangoni convection and surface segregation. Furthermore, the effects of droplet temperature gradient on the growth kinetics of the surface segregation shell are analyzed in the light of phase-field theory.

  13. Experimental investigations and phase-field simulations of triple-phase-separation kinetics within liquid ternary Co-Cu-Pb immiscible alloys

    Science.gov (United States)

    Wu, Y. H.; Wang, W. L.; Yan, N.; Wei, B.

    2017-05-01

    The phase-separation kinetics and microstructure evolution mechanisms of liquid ternary C o43C u40P b17 immiscible alloys are investigated by both the drop tube technique and phase-field method. Two successive phase separations take place during droplet falling and lead to the formation of a three-phase three-layer core-shell structure composed of a Co-rich core, a Cu-rich middle layer, and a Pb-rich shell. The Pb-rich shell becomes more and more conspicuous as droplet diameter decreases. Meanwhile, the Co-rich core center gradually moves away from the core-shell center. Theoretical analyses show that a larger temperature gradient inside a smaller alloy droplet induces the accelerated growth of the surface segregation shell during triple-phase separation. The residual Stokes motion and the asymmetric Marangoni convection result in the appearance of an eccentric Co-rich core and the core deviation degree is closely related to the droplet size and initial velocity. A three-dimensional phase-field model of ternary immiscible alloys, which considers the successive phase separations under the combined effects of Marangoni convection and surface segregation, is proposed to explore the formation mechanisms of three-phase core-shell structures. The simulated core-shell morphologies are consistent with the experimental observations, which verifies the model's validity in reproducing the core-shell dynamic evolution. Numerical results reveal that the development of three-phase three-layer core-shell structures can be attributed to the primary and then secondary phase separations dominated simultaneously by Marangoni convection and surface segregation. Furthermore, the effects of droplet temperature gradient on the growth kinetics of the surface segregation shell are analyzed in the light of phase-field theory.

  14. Investigation of strain effects on phase diagrams in the ternary nitride alloys (InAlN, AlGaN, InGaN)

    Energy Technology Data Exchange (ETDEWEB)

    Mohamad, Ranim; Chen, Jun; Ruterana, Pierre [CIMAP, UMR 6252, CNRS-ENSICAEN-CEA-UNICAEN, Caen (France); Bere, Antoine [Laboratoire de Physique et de Chimie de l' Environnement, Universite Ouaga I Pr Joseph KI-ZERBO, Ouagadougou (Burkina Faso)

    2017-09-15

    In this work, we used a modified Stillinger-Weber potential and a methodology of free energy calculation based on numerical computation of the configuration partition function of an alloy, to make a comprehensive study of the properties of group-III nitride ternary compounds (In{sub x}Ga{sub 1-x}N; In{sub x}Al{sub 1-x}N; Al{sub x}Ga{sub 1-x}N). The wurtzite structure was used; and the critical temperatures for the random ternary alloys are determined as 2717 K for In{sub x}Al{sub 1-x}N, 1718 K for In{sub x}Ga{sub 1-x}N, and 177 K for Al{sub x}Ga{sub 1-x}N, respectively. Therefore, Al{sub x}Ga{sub 1-x}N has no unstable mixing region at typical growth temperatures around 1100 C. In contrast, In{sub x}Al{sub 1-x}N and In{sub x}Ga{sub 1-x}N exhibit a wide unstable region, which means that being thick layers, their stability as homogeneous alloys is probably limited. In agreement with other reports, it is also pointed out that the critical temperature T{sub c} may be decreased when the layers are grown under strain. Although the compression and extension have the same effect below 1.5% strain, it is shown, for the first time, that when the compressive strain goes beyond, T{sub c} abruptly increases in contrast to the case of tensile strain where it continues to decrease. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Study of fatigue and fracture behavior of NbCr{sub 2}-based alloys: Phase stability in Nb-Cr-Ni ternary system

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, J.H.; Liaw, P.K. [Univ. of Tennessee, Knoxville, TN (United States). Dept. of Materials Science and Engineering; Liu, C.T. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.

    1997-12-01

    Phase stability in a ternary Nb-Cr-Ni Laves phase system was studied in this paper. Their previous study in NbCr{sub 2}-based transition-metal Laves phases has shown that the average electron concentration factor, e/a, is the dominating factor in controlling the phase stability of NbCr{sub 2}-based Laves phases when the atomic size ratios are kept identical. Since Ni has ten out-shell electrons, the substitution of Ni for Cr in NbCr{sub 2} will increase the average electron concentration of the alloy, thus leading to the change of the crystal structures from C15 to C14. In this paper, a number of pseudo-binary Nb(Cr,Ni){sub 2} alloys were prepared, and the crystal structures of the alloys after a long heat-treatment at 1000 C as a function of the Ni content were determined by the X-ray diffraction technique. The boundaries of the C15/C14 transition were determined and compared to their previous predictions. It was found that the electron concentration and phase stability correlation is obeyed in the Nb-Cr-Ni system. However, the e/a ratio corresponding to the C15/C14 phase transition was found to move to a higher value than the predicted one. The changes in the lattice constant, Vickers hardness and fracture toughness were also determined as a function of the Ni content, which were discussed in light of the phase stability difference of the alloys.

  16. VANADIUM ALLOYS

    Science.gov (United States)

    Smith, K.F.; Van Thyne, R.J.

    1959-05-12

    This patent deals with vanadium based ternary alloys useful as fuel element jackets. According to the invention the ternary vanadium alloys, prepared in an arc furnace, contain from 2.5 to 15% by weight titanium and from 0.5 to 10% by weight niobium. Characteristics of these alloys are good thermal conductivity, low neutron capture cross section, good corrosion resistance, good welding and fabricating properties, low expansion coefficient, and high strength.

  17. Electronic and optical properties of ternary alloys ZnxCd1−xS, ZnxCd1−xSe, ZnSxSe1−x, MgxZn1−xSe

    Directory of Open Access Journals (Sweden)

    Benchikh K.

    2017-02-01

    Full Text Available The empirical pseudopotential method (EPM within the virtual crystal approximation (VCA is used to calculate the electronic and optical properties of ternary alloys ZnxCd1−xS, ZnxCd1−xSe, ZnSxSe1−x and MgxZn1−xSe. The alloy band structures and energy gaps are calculated using VCA which incorporates the compositional disorder as an effective potential. The calculated band structures for the ZnxCd1−xS, ZnxCd1−xSe and ZnSxSe1−x alloys show a direct band gap in the whole range of the concentration except for the MgxZn1−xSe alloy which presents a crossover from the direct gap to the indirect one.Also the dependence of the refractive index on the concentration is calculated for each ternary alloy. This parameter is found to depend nonlinearly on the alloy concentration. A detailed comparison of our results with experimental data and works of other authors has led to a good agreement.

  18. Trace element control in binary Ni-25Cr and ternary Ni-30Co-30Cr master alloy castings

    Energy Technology Data Exchange (ETDEWEB)

    Detrois, Martin [National Energy Technology Lab. (NETL), Albany, OR (United States); Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States); Jablonski, Paul D. [National Energy Technology Lab. (NETL), Albany, OR (United States);

    2017-10-23

    Electro-slag remelting (ESR) is used for control of unwanted elements in commercial alloys. This study focuses on master alloys of Ni-25Cr and Ni-30Co-30Cr, processed through a combination of vacuum induction melting (VIM) and electro-slag remelting (ESR). Minor additions were made to control tramp element levels and modify the melting characteristics. Nitrogen and sulfur levels below 10 ppm and oxygen levels below 100 ppm were obtained in the final products. The role of the alloy additions in lowering the tramp element content, the resulting residual inclusions and the melting characteristics were determined computationally and confirmed experimentally. Additions of titanium were beneficial to the control of oxygen levels during VIM and nitrogen levels during ESR. Aluminum additions helped to control oxygen levels during remelting, however, aluminum pickup occurred when excess titanium was present during ESR. The usefulness of these master alloys for use as experimental remelt stock will also be discussed.

  19. Ternary fission

    Indian Academy of Sciences (India)

    2015-08-05

    Aug 5, 2015 ... We present the ternary fission of 252Cf and 236U within a three-cluster model as well as in a level density approach. The competition between collinear and equatorial geometry is studied by calculating the ternary fragmentation potential as a function of the angle between the lines joining the stationary ...

  20. Ternary fission

    Indian Academy of Sciences (India)

    Recently, we have studied the various aspects associated with the ternary fission process. A model, called the three-cluster model (TCM) [1–6] has been put forth. This accounts for the energy minimization of all possible ternary breakups of a heavy radioactive nucleus. Further, within the TCM we have analysed the ...

  1. Alloying effect on bright-dark exciton states in ternary monolayer Mo x W1-x Se2

    Science.gov (United States)

    Liu, Yanping; Tom, Kyle; Zhang, Xiaowei; Lou, Shuai; Liu, Yin; Yao, Jie

    2017-07-01

    Binary transition metal dichalcogenides (TMDCs) in the class MX2 (M = Mo, W; X = S, Se) have been widely investigated for potential applications in optoelectronics and nanoelectronics. Recently, alloy-based monolayers of TMDCs have provided a stable and versatile technique to tune the physical properties and optimize them for potential applications. Here, we present experimental evidence for the existence of an intermediate alloy state between the MoSe2-like and the WSe2-like behavior of the neutral exciton (X 0) using temperature-dependent photoluminescence (PL) of the monolayer Mo x W1-x Se2 alloy. The existence of a maximum PL intensity around 120 K can be explained by the competition between the thermally activated bright states and the non-radiative quenching of the bright states. Moreover, we also measured localized exciton (XB ) PL peak in the alloy and the observed behavior agrees well with a model previously proposed for the 3D case, which indicates the theory also applies to 2D systems. Our results not only shed light on bright-dark states and localized exciton physics of 2D semiconductors, but also offer a new route toward the control of the bright-dark transition and tailoring optical properties of 2D semiconductors through defect engineering.

  2. Influence of aging at 180C on the corrosion behaviour of a ternary Al-Li-Zr alloy

    DEFF Research Database (Denmark)

    Ambat, Rajan; Prasad, R.K.; Dwarakadasa, E.S.

    1994-01-01

    The influence of aging at 180 °C on the corrosion behaviour of an Al-1.5%Li-0.1%Zr alloy has been studied using weight loss, open circuit potential (OCP) measurements and potentiodynamic polarization measurements in 3.5% NaCl solution. Corrosion rates obtained from weight loss and Icorr values...

  3. Corrosion Resistance of Electroless Ni-Cu-P Ternary Alloy Coatings in Acidic and Neutral Corrosive Mediums

    OpenAIRE

    Mbouillé Cissé; Mohamed Abouchane; Tayeb Anik; Karima Himm; Rida Allah Belakhmima; Mohamed Ebn Touhami; Rachid Touir; Abderrahmane Amiar

    2010-01-01

    Electroless Ni-Cu-P alloy coatings were deposited on the ordinary steel substrate in an acidic hypophosphite-type plating bath. These coatings were characterized by a scanning electron microscope (SEM) and an X-ray diffraction. The micrograph shows that coating presents a nodular aspect and is relatively homogeneous and very smooth. The EDX analysis shows that the coating contains 12 wt.% of phosphorus element with a predominance of nickel element. In addition, the anticorrosion properties of...

  4. Solutal configuration during coupled two-phase [α (Al) + θ-Al2Cu] planar univariant eutetic growth in Al-Cu-(Ag, Si) ternary eutetic alloys

    Science.gov (United States)

    De Wilde, J.; Froyen, L.

    2005-03-01

    The solutal configuration, both in the solid as in the liquid, during coupled two-phase planar growth as it can be obtained during unidirectional solidification of ternary Al-Cu-Ag and Al-Cu-Si alloys with a composition close to the univariant eutectic reaction L → α (Al) + θ-Al2Cu has been investigated during preparatory ground experiments. During solidification, both Al and Cu can be redistributed in the liquid by cross-diffusion parallel to the planar solid/liquid interface. However the third element, i.e. Ag and Si, must be segregated over a much longer distance. In the case of Ag, a diffusive stable solute boundary layer has been observed. Si however is found to be solutal unstable and gravity driven solutal convection breaks up the boundary layer. In both cases, however, the interface is prone to a Mullins-Sekerka instability giving rise to two-phase cellular growth at a critical value of the growth velocity. In the solid, the α(Al) composition, determined by the solidus line, changes with changing growth velocity.

  5. The phase diagrams of the mixed-spin ternary-alloy consisting of half-integer spins: Standard-random approach

    Science.gov (United States)

    Albayrak, Erhan

    2018-02-01

    The ternary-alloy in the form ABpC1-p is investigated on the Bethe lattice with the odd numbered shells containing only A atoms (spin-1/2), while the even shells randomly containing either B (spin-3/2) or C (spin-5/2) atoms with different concentrations p and 1 - p, respectively. The phase diagrams are calculated on the (p ,kTc /JAB) and (R = |JAC | /JAB ,kTc /JAB) planes for given values of R and p, respectively, with the coordination numbers z = 3 , 4 , 5 and 6 by studying the thermal variations of the order-parameters. It is found that there exist a critical value of R, i.e. Rc ≅ 0.653, which is independent of z. In addition, the critical temperatures increase as z increases. The present work is an extension of the previous work [1] and it only differs from it by the implementation technique of randomness into the model. The obtained phase diagrams are in agreement with the site-dependent random case [1] except at low temperatures. On the other hand, there is an overall agreement with the literature.

  6. First-principle study of the structural, electronic, and optical properties of cubic InN{sub x}P{sub 1-x} ternary alloys under hydrostatic pressure

    Energy Technology Data Exchange (ETDEWEB)

    Hattabi, I. [Ibn Khaldoun Univ. de Tiaret (Algeria). Lab. Synthese et Catalyse; Abdiche, A.; Riane, R. [Sidi-bel-Abbes Univ. (Algeria). Applied Materials Lab.; Moussa, R. [Sidi-bel-Abbes Univ. (Algeria). Physic Dept.; Hadji, K. [Ibn Khaldoun Univ. de Tiaret (Algeria). Science and Technology Dept.; Soyalp, F. [Yuezuencue Yil Univ., Van (Turkey). Dept. of Physics; Varshney, Dinesh [Devi Ahilya Univ., Indore (India). Materials Science Lab.; Syrotyuk, S.V. [National Univ. ' Lviv Polytechnic' , Lviv (Ukraine). Semiconductor Electronics Dept.; Khenata, R. [Mascara Univ. (Algeria). Lab. de Physique Quantique et de Modelisation Mathematique (LPQ3M)

    2016-07-01

    In this article, we present results of the first-principle study of the structural, electronic, and optical properties of the InN, InP binary compounds and their related ternary alloy InN{sub x}P{sub 1-x} in the zinc-blend (ZB) phase within a nonrelativistic full potential linearised augmented plan wave (FP-LAPW) method using Wien2k code based on the density functional theory (DFT). Different approximations of exchange-correlation energy were used for the calculation of the lattice constant, bulk modulus, and first-order pressure derivative of the bulk modulus. Whereas the lattice constant decreases with increasing nitride composition x. Our results present a good agreement with theoretical and experimental data. The electronic band structures calculated using Tran-Blaha-modified Becke-Johnson (TB-mBJ) approach present a direct band gap semiconductor character for InN{sub x}P{sub 1-x} compounds at different x values. The electronic properties were also calculated under hydrostatic pressure for (P=0.00, 5.00, 10.0, 15.0, 20.0, 25.0 GPa) where it is found that the InP compound change from direct to indirect band gap at the pressure P≥7.80 GPa. Furthermore, the pressure effect on the dielectric function and the refractive index was carried out. Results obtained in our calculations present a good agreement with available theoretical reports and experimental data.

  7. Extended x-ray absorption fine structure and micro-Raman spectra of Bridgman grown Cd1-xZnxTe ternary alloys

    Science.gov (United States)

    Talwar, Devki N.; Feng, Zhe Chuan; Lee, Jyh-Fu; Becla, P.

    2014-03-01

    We have performed low-temperature micro-Raman scattering and extended x-ray absorption fine-structure (EXAFS) measurements on the Bridgman-grown bulk zinc-blende Cd1-x Zn x Te (1.0 ≧̸ x ≧̸ 0.03) ternary alloys to comprehend their structural and lattice dynamical properties. The micro-Raman results are carefully appraised to authenticate the classical two-phonon mode behavior insinuated by far-infrared (FIR) reflectivity study. The composition-dependent EXAFS experiments have revealed a bimodal distribution of the nearest-neighbor bond lengths—its analysis by first-principles bond-orbital model enabled us to estimate the lattice relaxations around Zn/Cd atoms in CdTe/ZnTe to help evaluate the necessary force constant variations for constructing the impurity-perturbation matrices. The simulated results of impurity vibrational modes by average-t-matrix Green’s function (ATM-GF) theory has put our experimental findings of the gap mode ˜153 cm-1 near x ≈ 1 on a much firmer ground.

  8. The effect of Pd on the isothermal relaxation of short-range order in Au(Ag)-based ternary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ziya, A.B. [Institute of Materials Science, University of Tsukuba, Tsukuba 305-8573 (Japan) and Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan)]. E-mail: dr.a.b.ziya@bzumail.edu.pk; Ohshima, K. [Institute of Materials Science, University of Tsukuba, Tsukuba 305-8573 (Japan)

    2005-08-01

    The effect of Pd on the isothermal relaxation of short-range order (SRO) was studied in Au{sub x}Ag{sub x}Pd{sub 100-2x} (x=25, 40at%) alloys, using the residual resistometry at 77K. The short-range ordering resulted in an increase of electrical resistivity. The equilibrium values of this property characterizing the SRO-equilibrium states exhibit a linear dependence on the reciprocal of temperature. The analysis of the resistivity data using the fundamental laws of SRO-kinetics shows that the resistivity behavior can be satisfactorily explained by the two-exponentials law and leads to the determination of characteristic time constants and the activation enthalpies for the two processes. Further, it is found that both the equilibrium and kinetic behavior of these alloys are highly dependent on the concentration of Pd. The presence of Pd reduces the atomic mobility which results from a decrease in the vacancy mobility linked to the positive size effect of Pd in these alloys.

  9. Characterization of Ternary NiTiPd High-Temperature Shape-Memory Alloys under Load-Biased Thermal Cycling

    Science.gov (United States)

    Bigelow, Glen S.; Padula, Santo A.; Noebe, Ronald D.; Garg, Anita; Gaydosh, Darrell

    2010-01-01

    While NiTiPd alloys have been extensively studied for proposed use in high-temperature shape-memory applications, little is known about the shape-memory response of these materials under stress. Consequently, the isobaric thermal cyclic responses of five (Ni,Pd)49.5Ti50.5 alloys with constant stoichiometry and Pd contents ranging from 15 to 46 at. pct were investigated. From these tests, transformation temperatures, transformation strain (which is proportional to work output), and unrecovered strain per cycle (a measure of dimensional instability) were determined as a function of stress for each alloy. It was found that increasing the Pd content over this range resulted in a linear increase in transformation temperature, as expected. At a given stress level, work output decreased while the amount of unrecovered strain produced during each load-biased thermal cycle increased with increasing Pd content, during the initial thermal cycles. However, continued thermal cycling at constant stress resulted in a saturation of the work output and nearly eliminated further unrecovered strain under certain conditions, resulting in stable behavior amenable to many actuator applications.

  10. A comparative evaluation between new ternary zirconium alloys as alternative metals for orthopedic and dental prosthetic devices.

    Science.gov (United States)

    Shyti, Genti; Rosalbino, Francesco; Macciò, Daniele; Scarabelli, Linda; Quarto, Rodolfo; Giannoni, Paolo

    2014-02-01

    We assessed in vitro the corrosion behavior and biocompatibility of four Zr-based alloys (Zr97.5 Nb1.5VM1.0  ; VM, valve metal: Ti, Mo, W, Ta; at%) to be used as implant materials, comparing the results with grade-2 titanium, a biocompatible metal standard. Corrosion resistance was investigated by open circuit potential and electrochemical impedance spectroscopy measurements as a function of exposure time to an artificial physiological environment (Ringer's solution). Human bone marrow stromal cells were used to evaluate biocompatibility of the alloys and their influence on growth kinetics and cell osteogenic differentiation through histochemical and gene expression analyses. Open circuit potential values indicated that Zr-based alloys and grade-2 Ti undergo spontaneous passivation in the simulated aggressive environment. High impedance values for all samples demonstrated improved corrosion resistance of the oxide film, with the best protection characteristics displayed by Zr97.5  Nb1.5Ta1.0. Cells seeded on all surfaces showed the same growth kinetics, although matrix mineralization and alkaline phosphatase activity were maximal on Zr97.5  Nb1.5Mo1.0 and Zr97.5   Nb1.5Ta1.0. Markers of ongoing proliferation, however, such as podocalyxin and CD49f, were still overexpressed on Zr97.5   Nb1.5   Mo1.0 even upon osteoinduction. No relevant effects were noted for the CD146-expressing population of bone progenitors. Nonetheless, the presence of a more differentiated cell population on Zr97.5Nb1.5Ta1.0 samples was inferable by comparing mineralization data and transcript levels of osteogenic markers (osteocalcin, osteopontin, bone sialoprotein, and RUNX2). The combination of passivation, corrosion resistance and satisfactory biotolerance to bone progenitors make the Zr-based alloys promising implant materials. Among those we tested, Zr97.5Nb1.5Ta1.0 seems to be the most appealing.

  11. Crystal growth, characterization and photo detection properties of 2H–V0.75W0.25Se2 ternary alloy with 1T–VSe2 secondary phase

    Science.gov (United States)

    Pataniya, Pratik; Solanki, G. K.; Patel, K. D.; Pathak, V. M.; Sumesh, C. K.

    2017-10-01

    Transition metal chalcogenides have shown great potential for the applications in high performance optoelectronic devices. Here, we demonstrate for the first time the growth of V0.75W0.25Se2 van der Waals ternary alloy and its application in high performance photodetection. The crystals of V0.75W0.25Se2 were grown by direct vapour transport technique and chemical composition was confirmed by EDAX. The powder XRD results reveal the good crystallinity of grown samples, exhibits hexagonal lattice structure with P63/mmc space group. The XRD pattern also reveals the presence of 1T–VSe2 secondary phase. The SEM and TEM analysis are also carried out for structural analysis. The optical response, studied by photoluminescence spectroscopy discloses the various excitonic mechanisms of V0.75W0.25Se2 ternary alloy. The results of Raman spectroscopy discloses the presence of A 1g and E 2g modes of vibration and confirms the 2H-poly-type of grown V0.75W0.25Se2 ternary compound. The moderately fast time-resolved photoresponse is demonstrated under 670 nm laser light of power intensity 3 mW cm‑2 at 0.3 V bias voltage. The quantitative analysis of performance was carried out from the determined detector parameters such as response time, photo-responsivity, external quantum efficiency and detectivity.

  12. Corrosion Resistance of Electroless Ni-Cu-P Ternary Alloy Coatings in Acidic and Neutral Corrosive Mediums

    Directory of Open Access Journals (Sweden)

    Mbouillé Cissé

    2010-01-01

    Full Text Available Electroless Ni-Cu-P alloy coatings were deposited on the ordinary steel substrate in an acidic hypophosphite-type plating bath. These coatings were characterized by a scanning electron microscope (SEM and an X-ray diffraction. The micrograph shows that coating presents a nodular aspect and is relatively homogeneous and very smooth. The EDX analysis shows that the coating contains 12 wt.% of phosphorus element with a predominance of nickel element. In addition, the anticorrosion properties of the Ni-Cu-P coatings in 1 M HCl, 1 M H2SO4, and 3% NaCl solutions were investigated using Tafel polarization curves, electrochemical impedance spectroscopy, and SEM/EDX analysis. The result showed a marginal improvement in corrosion resistance in 3% NaCl solution compared to acidic medium. It also showed that the corrosion mechanism depends on the nature of the solution.

  13. Theoretical investigation of structural, electronic and optical properties of MgxBa1-xS, MgxBa1-xSe and MgxBa1-xTe ternary alloys using DFT based FP-LAPW approach

    Science.gov (United States)

    Bhattacharjee, Rahul; Chattopadhyaya, Surya

    2017-11-01

    Density functional theory (DFT) based full-potential linearized augmented plane wave (FP-LAPW) methodology has been employed to investigate theoretically the structural, electronic and optical properties of MgxBa1-xS, MgxBa1-xSe and MgxBa1-xTe ternary alloys for 0 ≤ x ≤ 1 in their rock-salt (B1) crystallographic phase. The exchange-correlation potentials for the structural properties have been computed using the Wu-Cohen generalized-gradient approximation (WC-GGA) scheme, while those for the electronic and optical properties have been computed using both the WC-GGA and the recently developed Tran-Blaha modified Becke-Johnson (TB-mBJ) schemes. The thermodynamic stability of all the ternary alloys have been investigated by calculating their respective enthalpy of formation. The atomic and orbital origin of different electronic states in the band structure of the compounds have been identified from the respective density of states (DOS). Using the approach of Zunger and co-workers, the microscopic origin of band gap bowing has been discussed in term of volume deformation, charge exchange and structural relaxation. Bonding characteristics among the constituent atoms of each of the specimens have been discussed from their charge density contour plots. Optical properties of the binary compounds and ternary alloys have been investigated theoretically in terms of their respective dielectric function, refractive index, normal incidence reflectivity and optical conductivity. Several calculated results have been compared with available experimental and other theoretical data.

  14. Microstructural characterization and phase transformation of ternary alloys near at Al{sub 3}Ti compound; Caracterizacion microestructural y transformaciones de fase de aleaciones ternareas cercanas al compuesto Al{sub 3}Ti

    Energy Technology Data Exchange (ETDEWEB)

    Angeles Ch, C. [Instituto Nacional de Investigaciones Nucleares. Depto.de Sintesis y Caracterizacion de Materiales. Carretera Mexico-Toluca Km. 36.5 C.P. 52045, Ocoyoacac, Edo. de Mexico (Mexico)

    1999-07-01

    This research work is related with the structural characteristic and compositional values of the crystalline phases, which are found in ternary alloys of Ti-Al-Fe and TI-Al-Cu. These types of alloys were obtained using a rapid solidification technique (10{sup 3}-10{sup 4} K/s) and pure elements such as Al, Ti, Fe and Cu (99.99%). These cooling velocities allow the formation of stable phases and small grain sizes (approximately in range of a few micras). The obtained results indicate the presence of Al{sub 3}Ti and others phases of L1{sub 2} type. These phases are commonly found in a matrix rich in A1. The microalloyed elements (Cu and Fe) substitute the aluminum in both kinds of phases. Alloys with low content of Cu show transition states from the tetragonal structure DO{sub 22} to the cubic phases L1{sub 2}. The structural characteristics of the alloys are related with some microhardness measurement. The results show that the presence of the L1{sub 2} phase tends to increase to hardness depending of the content of this phase.

  15. Low-temperature sequential pulsed chemical vapor deposition of ternary B{sub x}Ga{sub 1-x}N and B{sub x}In{sub 1-x}N thin film alloys

    Energy Technology Data Exchange (ETDEWEB)

    Haider, Ali, E-mail: ali.haider@bilkent.edu.tr, E-mail: biyikli@unam.bilkent.edu.tr; Kizir, Seda; Ozgit-Akgun, Cagla; Biyikli, Necmi, E-mail: ali.haider@bilkent.edu.tr, E-mail: biyikli@unam.bilkent.edu.tr [National Nanotechnology Research Center (UNAM), Bilkent University, Bilkent, Ankara 06800, Turkey and Institute of Materials Science and Nanotechnology, Bilkent University, Bilkent, Ankara 06800 (Turkey); Okyay, Ali Kemal [National Nanotechnology Research Center (UNAM), Bilkent University, Bilkent, Ankara 06800 (Turkey); Institute of Materials Science and Nanotechnology, Bilkent University, Bilkent, Ankara 06800 (Turkey); Department of Electrical and Electronics Engineering, Bilkent University, Bilkent, Ankara 06800 Turkey (Turkey)

    2016-01-15

    In this work, the authors have performed sequential pulsed chemical vapor deposition of ternary B{sub x}Ga{sub 1-x}N and B{sub x}In{sub 1-x}N alloys at a growth temperature of 450 °C. Triethylboron, triethylgallium, trimethylindium, and N{sub 2} or N{sub 2}/H{sub 2} plasma have been utilized as boron, gallium, indium, and nitrogen precursors, respectively. The authors have studied the compositional dependence of structural, optical, and morphological properties of B{sub x}Ga{sub 1-x}N and B{sub x}In{sub 1-x}N ternary thin film alloys. Grazing incidence X-ray diffraction measurements showed that boron incorporation in wurtzite lattice of GaN and InN diminishes the crystallinity of B{sub x}Ga{sub 1-x}N and B{sub x}In{sub 1-x}N sample. Refractive index decreased from 2.24 to 1.65 as the B concentration of B{sub x}Ga{sub 1-x}N increased from 35% to 88%. Similarly, refractive index of B{sub x}In{sub 1-x}N changed from 1.98 to 1.74 for increase in B concentration value from 32% to 87%, respectively. Optical transmission band edge values of the B{sub x}Ga{sub 1-x}N and B{sub x}In{sub 1-x}N films shifted to lower wavelengths with increasing boron content, indicating the tunability of energy band gap with alloy composition. Atomic force microscopy measurements revealed an increase in surface roughness with boron concentration of B{sub x}Ga{sub 1-x}N, while an opposite trend was observed for B{sub x}In{sub 1-x}N thin films.

  16. Formation of ternary Mg–Cu–Dy bulk metallic glasses

    Indian Academy of Sciences (India)

    Administrator

    Abstract. The glass-forming ability (GFA) of ternary Mg–Cu–Dy alloys was systematically investigated by using differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) techniques. The results showed that a series of ternary Mg–Cu–Dy bulk metallic glasses (BGMs) with a diameter of 4–8 mm were suc-.

  17. Synthesis of Ternary Nitrides From Intermetallic Precursors: Modes of Nitridation in Model Cr3Pt Alloys to Form Cr3PtN Perovskite and Applications to Other Systems

    Energy Technology Data Exchange (ETDEWEB)

    Brady, Michael P [ORNL; Wrobel, Sarah [University of Tennessee, Knoxville (UTK); Lograsso, Tom [Ames Laboratory; Payzant, E Andrew [ORNL; Hoelzer, David T [ORNL; Horton Jr, Joe A [ORNL; Walker, Larry R [ORNL

    2004-01-01

    The use of intermetallic alloy precursors is explored as a new means to synthesize complex transition and refractory metal nitrides, carbides, and related phases. The conditions under which model single-phase Cr{sub 3}Pt and two-phase Cr{sub 3}Pt-dispersed Cr alloys form Cr{sub 3}PtN antiperovskite when thermally nitrided were studied. Phenomenological experiments suggest that the key variable to achieving single-phase Cr{sub 3}PtN surface layers is the Cr{sub 3}Pt phase composition. In two-phase {beta}-Cr-Cr{sub 3}Pt alloys, the formation of single-phase Cr{sub 3}PtN at Cr{sub 3}Pt precipitates by in-place internal nitridation was found to be a strong function of the size of the Cr{sub 3}Pt dispersion in the microstructure. Nanoscale Cr{sub 3}Pt dispersions were readily converted to near single-phase Cr{sub 3}PtN, whereas nitridation of coarse Cr{sub 3}Pt particles resulted in a cellular or discontinuous-type reaction to form a lath mixture of Cr{sub 3}PtN and a more Cr-rich Cr{sub 3}Pt or {beta}-Cr. The potential for using such external/internal oxidation phenomena as a synthesis approach to layered or composite surfaces of ternary ceramic phases (nitrides, carbides, borides, etc.) of technological interest such as the Ti{sub 3}AlC{sub 2} phase, bimetallic nitride, and carbide catalysts (Co{sub 3}Mo{sub 3}N and Co{sub 3}Mo{sub 3}C and related phases), and magnetic rare earth nitrides (Fe{sub 17}Sm{sub 2}N{sub x} or Fe{sub 17}Nd{sub 2}N{sub x}) is discussed.

  18. The role of bismuth on the microstructure and corrosion behavior of ternary Mg–1.2Ca–xBi alloys for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Tok, H.Y.; Hamzah, E., E-mail: Esah@fkm.utm.my; Bakhsheshi-Rad, H.R.

    2015-08-15

    Highlights: • Secondary phases have a significant effect on corrosion properties of the alloys. • Microstructure of Mg–Ca–xBi was refined significantly after Bi addition. • Addition of 0.5 wt.% Bi to Mg–Ca alloy leads to increase corrosion resistance. • Microstructure analysis showed needle-shaped precipitates at the grain boundaries. - Abstract: In this study the influence of various Bi additions on the microstructure and corrosion behavior of the Mg–1.2Ca–xBi alloys (x = 0.5, 1.5, 3, 5, 12 wt.%) were evaluated by using optical and scanning electron microscopy, immersion and electrochemical tests. Microstructural observations showed that the refinement efficiency became more pronounced with increased Bi amount. Microstructural results of Mg–1.2Ca–xBi (x = 0.5, 1.5, and 3) indicated that the formation of three distinct phases—namely α-Mg, Mg{sub 2}Ca and Mg{sub 3}Bi{sub 2}. However, further addition of Bi to 5 and 12 wt.% leads to evolution of α-Mg, Mg{sub 3}Bi{sub 2}, and Mg{sub 2}Bi{sub 2}Ca phases. The addition of Bi up to 0.5 wt.% enhanced corrosion resistance while further addition from 1.5 to 12 wt.% accelerated the degradation rate because of the emergence of more galvanic coupling between the α-Mg phases and secondary phases. The analyses showed that the Mg–1.2Ca–0.5Bi alloy gives the best corrosion resistance behavior, which makes it ideal for biodegradable medical applications.

  19. Liquid phase separation and rapid dendritic growth of highly undercooled ternary Fe62.5Cu27.5Sn10 alloy

    Science.gov (United States)

    Xia, Z. C.; Wang, W. L.; Luo, S. B.; Wei, B.

    2015-02-01

    The phase separation and dendritic growth characteristics of undercooled liquid Fe62.5Cu27.5Sn10 alloy have been investigated by glass fluxing and drop tube techniques. Three critical bulk undercoolings of microstructure evolution are experimentally determined as 7, 65, and 142 K. Equilibrium peritectic solidification proceeds in the small undercooling regime below 7 K. Metastable liquid phase separation takes place if bulk undercooling increases above 65 K. Remarkable macroscopic phase separation is induced providing that bulk undercooling overtakes the third threshold of 142 K. With the continuous increase of bulk undercooling, the solidified microstructure initially appears as well-branched dendrites, then displays microscale segregation morphology, and finally evolves into macrosegregation patterns. If alloy undercooling is smaller than 142 K, the dendritic growth velocity of γFe phase varies with undercooling according to a power function relationship. Once bulk undercooling exceeds 142 K, its dendritic growth velocity increases exponentially with undercooling, which reaches 30.4 m/s at the maximum undercooling of 360 K (0.21TL). As a comparative study, the liquid phase separation of Fe62.5Cu27.5Sn10 alloy droplets is also explored under the free fall condition. Theoretical calculations reveal that the thermal and solutal Marangoni migrations are the dynamic mechanisms responsible for the development of core-shell structure.

  20. Phase field crystal modeling of ternary solidification microstructures

    OpenAIRE

    Berghoff, Marco; Nestler, Britta

    2015-01-01

    In the present work, we present a free energy derivation of the multi-component phase-field crystal model [1] and illustrate the capability to simulate dendritic and eutectic solidification in ternary alloys. Fast free energy minimization by a simulated annealing algorithm of an approximated crystal is compared with the free energy of a fully simulated phase field crystal structure. The calculation of ternary phase diagrams from these free energies is described. Based on the free energies rel...

  1. Panchromatic Sequentially Cast Ternary Polymer Solar Cells.

    Science.gov (United States)

    Ghasemi, Masoud; Ye, Long; Zhang, Qianqian; Yan, Liang; Kim, Joo-Hyun; Awartani, Omar; You, Wei; Gadisa, Abay; Ade, Harald

    2017-01-01

    A sequential-casting ternary method is developed to create stratified bulk heterojunction (BHJ) solar cells, in which the two BHJ layers are spin cast sequentially without the need of adopting a middle electrode and orthogonal solvents. This method is found to be particularly useful for polymers that form a mechanically alloyed morphology due to the high degree of miscibility in the blend. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Thermodynamic Study of Sn-Bi-Nd, Tb Ternary Systems

    Science.gov (United States)

    Xu, F.; Chen, Y. T.; Ye, R.; Chen, Y. Y.; Su, X. H.; Wang, S. L.; Fu, C. Y.

    2017-09-01

    The aim of this study was to investigate the effect of the addition of rare earth elements on Sn-Bi-based alloy, and to study the phase equilibrium of Sn-Bi-Nd, Tb ternary systems by means of establishing the thermodynamic database. Combined with the thermodynamic parameters of relevant binary systems, the thermodynamic database of the Sn-Bi-Nd, Tb ternary systems has been developed to present the significant information for the design of low-temperature lead-free solder alloys.

  3. First principles calculation of electronic structure, bonding and chemical stability of TiB 2, NbB 2 and their ternary alloy Ti 0.5Nb 0.5B 2

    Science.gov (United States)

    Hamdad, N.; Benosman, N.; Bouhafs, B.

    2010-01-01

    The metal diboride family has been systematically studied in recent years due to the discovery of superconductivity for magnesium diboride MgB 2 at 39 K. TiB 2 is the most stable of several titanium-boron compounds, due to its high hardness, extreme melting point and chemical inertness. TiB 2 is a candidate for a number of applications; it is used for wear parts and in composites with other materials. In combination with other primarily oxide ceramics, TiB 2 is used to constitute composite materials in which the presence of the material serves to increase the strength and fracture toughness of the matrix. In our paper, the electronic structure of AlB 2-type transition metal diboride of TiB 2, NbB 2 and their ternary alloy Ti 0.5Nb 0.5B 2 have been calculated by using the full potential linearized augmented plane wave method with local orbitals (APW+ lo). We included the exchange correlation potential by using both the generalized gradient approximation (GGA) and the local density approximation (LDA), respectively, as embodied in the Wien2 K in full relativistic version. The electronic structure is discussed and the rigid band model is shown to provide a fairly good description. The Ti-3d and Nb-4d electron are treated as valence electrons. We explained in some detail the bonding nature of our compounds. The existence of the pseudogap in the total densities is found to be a common feature of these compounds, but we found that the pseudogap at Fermi-levels of TiB 2 is the competing effect of Ti-3d resonance and strong hybridization between Ti-3d and B-2p states. The variation of the chemical stabilities of these diborides is analysed. The results are compared with other theoretical and experimental work.

  4. Calculated site substitution in ternary gamma'-Ni3Al: Temperature and composition effects

    DEFF Research Database (Denmark)

    Ruban, Andrei; Skriver, Hans Lomholt

    1997-01-01

    The temperature and composition dependence of the site substitution behavior of ternary additions to Ni3Al is examined on the basis of first-principles calculations of the total energies of ternary, partially ordered (gamma') alloys. The calculations are performed by means of the linear muffin...

  5. Carbon/Ternary Alloy/Carbon Optical Stack on Mylar as an Optical Data Storage Medium to Potentially Replace Magnetic Tape

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hao; Lunt, Barry M.; Gates, Richard J.; Asplund, Matthew C.; Shutthanandan, V.; Davis, Robert C.; Linford, Matthew R.

    2013-09-11

    A novel write-once-read-many (WORM) optical stack on Mylar tape is proposed as a replacement for magnetic tape for archival data storage. This optical tape contains a cosputtered bismuth–tellurium–selenium (BTS) alloy as the write layer sandwiched between thin, protective films of reactively sputtered carbon. The composition and thickness of the BTS layer were confirmed by Rutherford Backscattering (RBS) and atomic force microscopy (AFM), respectively. The C/BTS/C stack on Mylar was written to/marked by 532 nm laser pulses. Under the same conditions, control Mylar films without the optical stack were unaffected. Marks, which showed craters/movement of the write material, were characterized by optical microscopy and AFM. The threshold laser powers for making marks on C/BTS/C stacks with different thicknesses were explored. Higher quality marks were made with a 60× objective compared to a 40× objective in our marking apparatus. Finally, the laser writing process was simulated with COMSOL.

  6. Research and Development on Titanium Alloys

    Science.gov (United States)

    1949-08-31

    61 No. 733 LWE: ec/mk/ma September 14, 1949 13ATTK- LLE MESMORIAL INSTITUTE DEPARTMENT OF THE AIR FORCE HEADOUARTERS AERONAUTICAL SYSTEMS CENTER (AFMC...period reported, titanium binary alloys of germanium and nickel vere studied, as venl as tltanium-molybdenum and titanium- manganese ternary alloys. Carbon...September 18, 1949, titanium binary alloys of germanium and nickel were studied. Also investigated were titanium-molybdenum and titanium-manganese ternary

  7. Ternary chalcopyrite semiconductors

    CERN Document Server

    Shay, J L; Pamplin, B R

    2013-01-01

    Ternary Chalcopyrite Semiconductors: Growth, Electronic Properties, and Applications covers the developments of work in the I-III-VI2 and II-IV-V2 ternary chalcopyrite compounds. This book is composed of eight chapters that focus on the crystal growth, characterization, and applications of these compounds to optical communications systems. After briefly dealing with the status of ternary chalcopyrite compounds, this book goes on describing the crystal growth of II-IV-V2 and I-III-VI2 single crystals. Chapters 3 and 4 examine the energy band structure of these semiconductor compounds, illustrat

  8. New Theoretical Technique for Alloy Design

    Science.gov (United States)

    Ferrante, John

    2005-01-01

    During the last 2 years, there has been a breakthrough in alloy design at the NASA Lewis Research Center. A new semi-empirical theoretical technique for alloys, the BFS Theory (Bozzolo, Ferrante, and Smith), has been used to design alloys on a computer. BFS was used, along with Monte Carlo techniques, to predict the phases of ternary alloys of NiAl with Ti or Cr additions. High concentrations of each additive were used to demonstrate the resulting structures.

  9. Thermodynamics of liquid aluminium-copper-silicon alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kanibolotsky, D.S.; Bieloborodova, O.A.; Stukalo, V.A.; Kotova, N.V.; Lisnyak, V.V

    2004-03-23

    In this paper, thermodynamic properties of liquid Al-Cu-Si alloys were studied by electromotive force method with liquid electrolyte at 920-1250 K and by high-temperature isoperibolic calorimetry at 1750{+-}5 K. The integral enthalpy of mixing in ternary Al-Cu-Si melts was estimated by Bonnier model for definition of boundary binary systems contribution to ternary alloys thermodynamics. The satisfactory agreement between experimental and estimated data demonstrates that thermodynamic properties of ternary liquid alloys are mainly defined by thermodynamic behaviour of boundary binary systems. Analysis of concentration and thermal dependencies of thermodynamic functions of mixing in liquid Al-Cu-Si alloys has been performed. It has been established that increasing of temperature results in decreasing of the integral enthalpy of mixing. This fact is probably associated with contribution of silicon clusters into ternary alloys thermodynamics.

  10. Nanostructured Platinum Alloys for Use as Catalyst Materials

    Science.gov (United States)

    Hays, Charles C. (Inventor); Narayan, Sri R. (Inventor)

    2015-01-01

    A series of binary and ternary Pt-alloys, that promote the important reactions for catalysis at an alloy surface; oxygen reduction, hydrogen oxidation, and hydrogen and oxygen evolution. The first two of these reactions are essential when applying the alloy for use in a PEMFC.

  11. Approximately Ternary Homomorphisms on C*-Ternary Algebras

    Directory of Open Access Journals (Sweden)

    Eon Wha Shim

    2013-01-01

    functional equation: fx2-x1/3+fx1-3x3/3+f3x1+3x3-x2/3=fx1, by the direct method. Under the conditions in the main theorems, we can show that the related mappings must be zero. In this paper, we correct the conditions and prove the corrected theorems. Furthermore, we prove the Hyers-Ulam stability and the superstability of C*-ternary homomorphisms and C*-ternary derivations on C*-ternary algebras by using a fixed point approach.

  12. Theoretical investigations of Co{sub 2}Mn{sub 1-x}Cr{sub x}Sn and Co{sub 2}MnSn{sub 1-y}Si{sub y} pseudo-ternary alloys: First principles calculations

    Energy Technology Data Exchange (ETDEWEB)

    Charifi, Z., E-mail: charifizoulikha@gmail.com [Physics Department, Faculty of Science, University of M' sila, 28000 M' sila (Algeria); Hamad, B. [Physics Department, The University of Jordan, Amman 11942 (Jordan); Physics Department, University of Arkansas, 825 W. Dickson St., Fayetteville, AR 72701 (United States); Baaziz, H. [Physics Department, Faculty of Science, University of M' sila, 28000 M' sila (Algeria); Soyalp, F. [Yüzüncü Yıl University, Faculty of Education, Department of Physics, Van 65080 (Turkey)

    2015-11-01

    The electronic and magnetic properties of Co{sub 2}Mn{sub 1−x}Cr{sub x}Sn and Co{sub 2}MnSn{sub 1−y}Si{sub y} alloys are investigated using density functional theory (DFT) within a full-potential linearized augmented-plane-wave (FP-LAPW) method. Amongst the systems under investigation, Co{sub 2}MnSn{sub 1−y}Si{sub y} alloys show half metallicity with 100% spin polarization at the Fermi level, however Co{sub 2}Mn{sub 1−x}Cr{sub x}Sn are found to be pseudo-half metals with few minority states at the Fermi level and high spin polarization. The substitution of Si with Sn keeps the magnetic moment constant in Co{sub 2}MnSn{sub 1−y}Si{sub y} alloys, whereas the substitution of Mn with Cr decreases the magnetic moment and degrade the half-metallicity in Co{sub 2}Mn{sub 1−x}Cr{sub x}Sn alloys. The Curie temperature is calculated and it is found to be about 928 K for all Co{sub 2}MnSn{sub 1−y}Si{sub y} alloys, whereas it decreases linearly with x for Co{sub 2}Mn{sub 1−x}Cr{sub x}Sn alloys. The lattices constants, bulk modulii, energy gaps, polarization ratio and density of states are calculated and their variation versus x or y are discussed. - Highlights: • The band structure calculations show that Co{sub 2}MnSn{sub 1−y}Si{sub y} alloys are half-metallic ferromagnets. • The effect of substituting Sn by Si is a slight change in the position of the Fermi level and an increase in the band gap. • For Co{sub 2}Mn{sub 1−x}Cr{sub x}Sn alloys, the results suggest that there is a finite density of states in the minority-spin d band of manganese. • The Co{sub 2}Mn{sub 1−x}Cr{sub x}Sn compounds cannot be classified as half-metallic ferromagnets. • The substitution of Mn with Cr decreases the magnetic moment per formula unit from 5.0 to 4.0µ{sub B}.

  13. Iron binary and ternary coatings with molybdenum and tungsten

    Energy Technology Data Exchange (ETDEWEB)

    Yar-Mukhamedova, Gulmira, E-mail: gulmira-alma-ata@mail.ru [Institute Experimental and Theoretical Physics Al-Farabi Kazakh National University, 050038, Al-Farabi av., 71, Almaty (Kazakhstan); Ved, Maryna; Sakhnenko, Nikolay; Karakurkchi, Anna; Yermolenko, Iryna [National Technical University “Kharkov Polytechnic Institute”, Kharkov (Ukraine)

    2016-10-15

    Highlights: • High quality coatings of double Fe-Mo and ternary Fe-Mo-W electrolytic alloys can be produced both in a dc and a pulsed mode. • Application of unipolar pulsed current allows receiving an increased content of the alloying components and their more uniform distribution over the surface. • It is established that Fe-Mo and Fe-Mo-W coatings have an amorphous structure and exhibit improved corrosion resistance and microhardness as compared with the steel substrate due to the inclusion molybdenum and tungsten. - Abstract: Electrodeposition of Fe-Mo-W and Fe-Mo layers from a citrate solution containing iron(III) on steel and iron substrates is compared. The utilization of iron(III) compounds significantly improved the electrolyte stability eliminating side anodic redox reactions. The influence of concentration ratios and electrodeposition mode on quality, chemical composition, and functional properties of the alloys is determined. It has been found that alloys deposited in pulse mode have more uniform surface morphology and chemical composition and contain less impurities. Improvement in physical and mechanical properties as well as corrosion resistance of Fe-Mo and Fe-Mo-W deposits when compared with main alloy forming metals is driven by alloying components chemical passivity as well as by alloys amorphous structure. Indicated deposits can be considered promising materials in surface hardening technologies and repair of worn out items.

  14. ZIRCONIUM-TITANIUM-BERYLLIUM BRAZING ALLOY

    Science.gov (United States)

    Gilliland, R.G.; Patriarca, P.; Slaughter, G.M.; Williams, L.C.

    1962-06-12

    A new and improved ternary alloy is described which is of particular utility in braze-bonding parts made of a refractory metal selected from Group IV, V, and VI of the periodic table and alloys containing said metal as a predominating alloying ingredient. The brazing alloy contains, by weight, 40 to 50 per cent zirconium, 40 to 50 per cent titanium, and the balance beryllium in amounts ranging from 1 to 20 per cent, said alloy having a melting point in the range 950 to 1400 deg C. (AEC)

  15. Contribution to the aluminum–tin–zinc ternary system

    Science.gov (United States)

    Drápala, J.; Kostiuková, G.; Losertová, M.

    2017-11-01

    The Sn–Zn–Al alloys are one of significant candidates in the proposal of alternative lead-free solders for higher temperature soldering. This paper deals with the study of the aluminum–tin–zinc system. Twenty Sn–Zn–Al alloys together with six binary Sn–Zn alloys were prepared and studied experimentally. Alloys were prepared from pure Sn, Zn and Al (melting and cooling in a vacuum resistance furnace). The specimens were studied metallographically including the micro-hardness measurements, complete chemical analysis (ICP-AES, OES), X-ray micro-analysis of alloys by SEM and EDX in order to determine the composition and identification of individual phases. Significant temperatures and enthalpies of phase transformations were determined by DTA. After long-term annealing of selected alloys in vacuum followed by quenching the structural and chemical microanalyses of the present phases and their limit concentrations were carried out. The achieved results were compared with the thermodynamic modelling of the ternary Sn–Zn–Al system (computer programs THERMOCALC, MTDATA, PANDAT and databases CALPHAD, COST). Electrical resistivity, density, magnetic susceptibility and wettability of Sn–Zn–Al solders were measured as well.

  16. Effect of the selected alloying on Ni-Mn-Ga alloys

    Energy Technology Data Exchange (ETDEWEB)

    Soederberg, O.; Koho, K.; Sammi, T.; Liu, X.W.; Sozinov, A.; Lanska, N.; Lindroos, V.K

    2003-07-25

    The aim of the present study was to investigate the possibilities of changing some characteristics of ternary Ni-Mn-Ga alloys by alloying. Therefore, five quaternary materials were prepared from the same polycrystalline Ni-Mn-Ga master ternary alloy with about 2 at.% additions of Bi, Pb, Si, Sn and Zn. The transformation temperatures and Curie points of the annealed materials were determined with DSC and magnetic susceptibility measurements. The crystal structures of the alloys were determined with the X-ray diffraction. In alloys with Si and Sn phase transformations were retarded to very low temperatures or outside the observable temperature region (below 113 K). With Si alloying a clear premartensitic softening was present. Bi, Pb and Zn doping preserved the original monoclinic crystal structure of the master alloy with slight lattice parameter changes. Bi increased slightly the phase transformation temperatures and decreased the Curie point, while in the two others phase transformations were shifted little lower and Curie temperature to higher temperatures. The intermartensitic transformation present in the ternary alloy was either totally retarded or diminished to a large extent in all of the doped alloys.

  17. The ternary system: Silicon-tantalum-uranium

    Energy Technology Data Exchange (ETDEWEB)

    Rogl, Peter, E-mail: peter.franz.rogl@univie.ac.a [Institute of Physical Chemistry, University of Vienna, A-1090 Wien, Waehringerstrasse 42 (Austria); Noel, Henri [Laboratoire de Chimie du Solide et Materiaux, UMR-CNRS 6226, Universite de Rennes I, Avenue du General Leclerc, F-35042 Rennes, Cedex (France)

    2010-09-01

    Phase equilibria in the ternary system Si-Ta-U have been established in an isothermal section at 1000 {sup o}C by optical microscopy, electron probe microanalysis and X-ray diffraction. Two novel ternary compounds were observed and were characterised by X-ray powder Rietveld refinement: stoichiometric {tau}{sub 1}-U{sub 2}Ta{sub 3}Si{sub 4} (U{sub 2}Mo{sub 3}Si{sub 4}-type, P2{sub 1}/c; a = 0.70011(1), b = 0.70046(1), c = 0.68584(1) nm, ss = 109.38(1); R{sub F} = 0.073, X-ray powder Rietveld refinement) and {tau}{sub 2}-U{sub 2-x}Ta{sub 3+x}Si{sub 4} at x {approx} 0.30 (Sc{sub 2}Re{sub 3}Si{sub 4}-type = partially ordered Zr{sub 5}Si{sub 4}-type, P4{sub 1}2{sub 1}2; a = b = 0.69717(3)(1), c = 1.28709(4) nm; R{sub F} = 0.056; X-ray single crystal data). Mutual solubility of U-silicides and Ta-silicides are found to be very small i.e. below about 1 at.%. Due to the equilibrium tie-line Ta{sub 2}Si-U(Ta), no compatibility exists between the U-rich silicides U{sub 3}Si or U{sub 3}Si{sub 2} and tantalum metal. Single crystals obtained from alloys slowly cooled from liquid (2000 {sup o}C), yielded a fully ordered compound U{sub 2}Ta{sub 2}Si{sub 3}C (unique structure type; Pmna, a = 0.68860(1); b = 2.17837(4); c = 0.69707(1) nm; R{sub F2} = 0.048).

  18. Amorphous phase formation in the Cu{sub 36}Zr{sub 59}A{sub l5} and Cu{sub 48}Zr{sub 43}A{sub l9} ternary alloys studied by molecular dynamics; Estudo da formacao de fase amorfa nas ligas ternarias Cu{sub 36}Zr{sub 59}A{sub l5} e Cu{sub 48}Zr{sub 43}A{sub l9} por dinamica molecular

    Energy Technology Data Exchange (ETDEWEB)

    Aliaga, L.C.R.; Schimidt, C.S.; Lima, L.V.; Domingues, G.M.B.; Bastos, I.N., E-mail: aliaga@iprj.uer.br [Universidade do Estado do Rio de Janeiro (UERJ), Nova friburgo, RJ (Brazil). Departamento de Materiais

    2016-07-01

    Amorphous alloys presents better mechanical and physical properties than its crystalline counterparts. However, there is a scarce understanding on structure - properties relationship in this class of materials. This paper presents the results of the molecular dynamics application to obtain an atomistic description of melting, solidification and the glass forming ability in the ternary Cu{sub 36}Zr{sub 59}A{sub l5} and Cu{sub 48}Zr{sub 43}A{sub l9} alloys. In the study we used the EAM potential and different cooling rates, β = 0.1, 1 and 100 K/ps to form the amorphous phase in a system consisting of 32,000 atoms by using the free code LAMMPS. The solidus and liquidus temperatures, on a heating rate of the 5 K/ps, were obtained. Also, on the cooling down step, it was observed that the glass transition temperature (T{sub g}) decreases as cooling rate increases. The structural evolution was analyzed through the radial distribution functions and Voronoi polyhedra. Furthermore, it was determined the evolution of viscosity upper T{sub g}, as well as the fragility (m) parameter for each amorphous alloy. The thermal parameters of the simulation obtained are compared with those of the experiments. (author)

  19. Optical Characterization of AlAsSb Digital Alloy and Random Alloy on GaSb

    Directory of Open Access Journals (Sweden)

    Bor-Chau Juang

    2017-10-01

    Full Text Available III-(As, Sb alloys are building blocks for various advanced optoelectronic devices, but the growth of their ternary or quaternary materials are commonly limited by spontaneous formation of clusters and phase separations during alloying. Recently, digital alloy growth by molecular beam epitaxy has been widely adopted in preference to conventional random alloy growth because of the extra degree of control offered by the ordered alloying. In this article, we provide a comparative study of the optical characteristics of AlAsSb alloys grown lattice-matched to GaSb using both techniques. The sample grown by digital alloy technique showed stronger photoluminescence intensity, narrower peak linewidth, and larger carrier activation energy than the random alloy technique, indicating an improved optical quality with lower density of non-radiative recombination centers. In addition, a relatively long carrier lifetime was observed from the digital alloy sample, consistent with the results obtained from the photoluminescence study.

  20. Data transmission is faster with ternary coding

    CERN Document Server

    Bruins, T

    1974-01-01

    Discusses a ternary data transmission system for an effective rate of up to 6 megabits per second over a 1-mile line of ordinary twisted- pair cable. The methods are discussed of implementing a ternary data transmission system. (0 refs).

  1. Bandgap and Structure Engineering via Cation Exchange: From Binary Ag2S to Ternary AgInS2, Quaternary AgZnInS alloy and AgZnInS/ZnS Core/Shell Fluorescent Nanocrystals for Bioimaging.

    Science.gov (United States)

    Song, Jiangluqi; Ma, Chao; Zhang, Wenzhe; Li, Xiaodong; Zhang, Wenting; Wu, Rongbo; Cheng, Xiangcan; Ali, Asad; Yang, Mingya; Zhu, Lixin; Xia, Ruixiang; Xu, Xiaoliang

    2016-09-21

    Attention on semiconductor nanocrystals have been largely focused because of their unique optical and electrical properties, which can be applied as light absorber and luminophore. However, the band gap and structure engineering of nanomaterials is not so easy because of their finite size. Here we demonstrate an approach for preparing ternary AgInS2 (AIS), quaternary AgZnInS (AZIS), AgInS2/ZnS and AgZnInS/ZnS nanocompounds based on cation exchange. First, pristine Ag2S quantum dots (QDs) with different sizes were synthesized in one-pot, followed by the partial cation exchange between In(3+) and Ag(+). Changing the initial ratio of In(3+) to Ag(+), reaction time and temperature can control the components of the obtained AIS QDs. Under the optimized conditions, AIS QDs were obtained for the first time with a cation disordered cubic phase and high photoluminescence (PL) quantum yield (QY) up to 32% in aqueous solution, demonstrating the great potential of cation exchange in the synthesis for nanocrystals with excellent optical properties. Sequentially, Zn(2+) ions were incorporated in situ through a second exchange of Zn(2+) to Ag(+)/In(3+), leading to distinct results under different reaction temperature. Addition of Zn(2+) precursor at room temperature produced AIS/ZnS core/shell NCs with successively enhancement of QY, while subsequent heating could obtain AZIS homogeneous alloy QDs with a successively blue-shift of PL emission. This allow us to tune the PL emission of the products from 483 to 675 nm and fabricate the chemically stable QDs core/ZnS shell structure. Based on the above results, a mechanism about the cation exchange for the ternary nanocrystals of different structures was proposed that the balance between cation exchange and diffusion is the key factor of controlling the band gap and structure of the final products. Furthermore, photostability and in vitro experiment demonstrated quite low cytotoxicity and remarkably promising applications in the

  2. Data and analyses of phase relations in the Ce-Fe-Sb ternary system.

    Science.gov (United States)

    Zhu, Daiman; Xu, Chengliang; Li, Changrong; Guo, Cuiping; Zheng, Raowen; Du, Zhenmin; Li, Junqin

    2018-02-01

    These data and analyses support the research article "Experimental study on phase relations in the Ce-Fe-Sb ternary system" Zhu et al. (2017) [1]. The data and analyses presented here include the experimental results of XRD, SEM and EPMA for the determination of the whole liquidus projection and the isothermal section at 823 K in the Ce-Fe-Sb system. All the results enable the understanding of the constituent phases and the solidification processes of the as-cast alloys as well as the phase relations and the equilibrium regions at 823 K in the Ce-Fe-Sb ternary system over the entire composition.

  3. Phase equilibria of the Mo-Al-Ho ternary system

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yitai; Chen, Xiaoxian; Liu, Hao [Guangxi Univ., Nanning (China). College of Materials Science and Engineering; Guangxi Univ., Nanning (China). Guangxi Key Laboratory of Processing for Non-ferrous Metal and Featured Materials; Zhan, Yongzhong [Guangxi Univ., Nanning (China). College of Materials Science and Engineering; Guangxi Univ., Nanning (China). Guangxi Key Laboratory of Processing for Non-ferrous Metal and Featured Materials; Guangxi Univ., Nanning (China). Center of Ecological Collaborative Innovation for Aluminum Industry

    2017-08-15

    Investigation into the reactions and phase equilibria of transition metal elements (i.e. Mo, Zr, Cr, V and Ti), Al and rare earths is academically and industrially important for the development of both refractory alloys and lightweight high-temperature materials. In this work, the equilibria of the Mo-Al-Ho ternary system at 773 K have been determined by using X-ray powder diffraction and scanning electron microscopy equipped with energy dispersive X-ray analysis. A new ternary phase Al{sub 4}Mo{sub 2}Ho has been found and the other ternary phase Al{sub 43}Mo{sub 4}Ho{sub 6} is observed. Ten binary phases in the Al-Mo and Al-Ho systems, including Al{sub 17}Mo{sub 4} rather than Al{sub 4}Mo, have been determined to exist at 773 K. The homogeneity ranges of AlMo{sub 3} and Al{sub 8}Mo{sub 3} phase are 7.5 at.% and 1 at.%, respectively. According to the phase-disappearing method, the maximum solubility of Al in Mo is about 16 at.%.

  4. Mesoscale inhomogeneities in an aqueous ternary system

    Science.gov (United States)

    Subramanian, Deepa; Hayward, Stephen; Altabet, Elia; Collings, Peter; Anisimov, Mikhail

    2012-02-01

    Aqueous solutions of certain low-molecular-weight organic compounds, such as alcohols, amines, or ethers, which are considered macroscopically homogeneous, show the presence of mysterious mesoscale inhomogeneities, order of a hundred nm in size. We have performed static and dynamic light scattering experiments in an aqueous ternary system consisting of tertiary butyl alcohol and propylene oxide. Tertiary butyl alcohol is completely soluble in water and in propylene oxide, and forms strong hydrogen bonds with water molecules. Based on results of the study, we hypothesize that the mesoscale inhomogeneities are akin to a micro phase separation, resulting from a competition between water molecules and propylene oxide molecules, wanting to be adjacent to amphiphilic tertiary butyl alcohol molecules. Coupling between two competing order parameters, super-lattice binary-alloy-like (``antiferromagnetic'' type) and demixing (``ferromagnetic'' type) may explain the formation of these inhomogeneities. Long-term stability investigation of this supramolecular structure has revealed that these inhomogeneities are exceptionally long-lived non-equilibrium structures that persist for weeks or even months.

  5. Research and Development on Titanium Alloys

    Science.gov (United States)

    1949-10-31

    are being prepared by the Norton Company for evaluation. Titanium boride , tantalum boride , zirconium boride , tungsten boride , and molybdenum boride ...alloying additionO will be ex- tended. 9 Ternary alloys of manganese and carbon, manganese and vanadium, and molybdenum and tungsten, prepared by...graphite crucibles lined with tantalum carbide and turgsten boride as refractories for molten titanium,. Melts were prepared In crucibles made of zirconium

  6. Laser alloyed Al-Ni-Fe coatings

    CSIR Research Space (South Africa)

    Pityana, SL

    2008-10-01

    Full Text Available The aim of this work was to produce crack-free thin surface layers consisting of binary (Al-Ni, Al-Fe) and ternary (Al-Ni-Fe) intermetallic phases by means of a high power laser beam. The laser surface alloying was carried out by melting Fe and Ni...

  7. Microstructural evolution and thermal stability of aluminum-cerium-nickel ternary eutectic

    Science.gov (United States)

    Fodran, Eric John

    The engineering community has identified several applications in which the use of a lightweight alloy for elevated temperature service, in substitution for current heavier and more costly alloys, would have a substantial benefit. This need for structural materials to perform at elevated temperatures has driven researchers to develop novel alloys as well as processing routes to manufacture them and obtain optimum microstructures. Previous studies on aluminum based binary eutectic systems have proven that the aluminum alloy system shows promising potential for satisfying this need. This has motivated the investigation of the solidification and thermal stability of the Al-12 wt% Ce-5 wt% Ni ternary eutectic performed in this investigation. The solidification behavior of the Al-Ce-Ni ternary eutectic was conducted via solidification of various compositions at and above the eutectic composition in a copper chill mold, thus allowing the observation of various solidification rates on a single ingot. Directional solidification of the ternary eutectic was also conducted to further study the unique microstructures forms. After casting the ingots were analyzed for the composition of phases in the microstructure via X-ray diffraction, and the distribution of the phases determined by scanning electron microscopy. The solidification of the ternary eutectic was found to occur much like that of a faceted/non-faceted binary couples growth. The thermal stability of the microstructure was also studied. Ternary eutectic microstructures were heat treated at various temperatures for time intervals up to 100 hours. The coupled growth microstructures were found to coarsen at temperature above 400°C, which was associated with a loss in hardness. Coarsening of the microstructures at elevated temperatures was also observed to occur by multiple mechanisms: an Ostwald ripening within the eutectic cell, and an accelerated coarsening at the cell boundaries due to increased diffusion at

  8. Some new ternary linear codes

    Directory of Open Access Journals (Sweden)

    Rumen Daskalov

    2017-07-01

    Full Text Available Let an $[n,k,d]_q$ code be a linear code of length $n$, dimension $k$ and minimum Hamming distance $d$ over $GF(q$. One of the most important problems in coding theory is to construct codes with optimal minimum distances. In this paper 22 new ternary linear codes are presented. Two of them are optimal. All new codes improve the respective lower bounds in [11].

  9. A simple method for determining the lattice parameter and chemical composition in ternary bcc-Fe rich nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Moya, Javier A., E-mail: jmoya.fi.uba@gmail.com [Grupo Interdisciplinario en Materiales-IESIING, Universidad Católica de Salta, INTECIN UBA-CONICET, Salta (Argentina); Gamarra Caramella, Soledad; Marta, Leonardo J. [Grupo Interdisciplinario en Materiales-IESIING, Universidad Católica de Salta, INTECIN UBA-CONICET, Salta (Argentina); Berejnoi, Carlos [Universidad Nacional de Salta, Facultad de Ingeniería, Salta (Argentina)

    2015-05-15

    Highlights: • A method for determining composition in ternary nanocrystals is presented. • X-ray diffraction and Mössbauer spectroscopy data were employed. • We perform theoretical charts for lattice parameter of Fe-rich ternary alloys. • A linear relationship in lattice parameter for binary alloys is evaluated. • A parabolic relationship is proposed for the Fe–Co–Si alloy. - Abstract: Charts containing lattice parameters of Fe{sub 1−x}(M,N){sub x} ternary systems with M and N = Si, Al, Ge or Co, and 0 ⩽ x ⩽ ∼0.3, were developed by implementing a linear relationship between the respective binary alloys with the same solute content of the ternary one. Charts were validated with experimental data obtained from literature. For the Fe–Co–Si system, the linear relationship does not fit the experimental data. For the other systems (except the Fe–Co–Ge one where no experimental data was found), the lineal relationship constitute a very good approximation. Using these charts and the lattice parameter data obtained from X-ray diffraction technique combining with the solute content data obtained from Mössbauer spectroscopy technique it is possible to determine the chemical composition of nanograins in soft magnetic nanocomposite materials and some examples are provided.

  10. Density functional theory based screening of ternary alkali-transition metal borohydrides: A computational material design project

    DEFF Research Database (Denmark)

    Hummelshøj, Jens Strabo; Landis, David; Voss, Johannes

    2009-01-01

    We present a computational screening study of ternary metal borohydrides for reversible hydrogen storage based on density functional theory. We investigate the stability and decomposition of alloys containing 1 alkali metal atom, Li, Na, or K (M1); and 1 alkali, alkaline earth or 3d/4d transition...

  11. Nearly Ternary Quadratic Higher Derivations on Non-Archimedean Ternary Banach Algebras: A Fixed Point Approach

    Directory of Open Access Journals (Sweden)

    M. Eshaghi Gordji

    2011-01-01

    Full Text Available We investigate the stability and superstability of ternary quadratic higher derivations in non-Archimedean ternary algebras by using a version of fixed point theorem via quadratic functional equation.

  12. Ternary cobalt-molybdenum-zirconium coatings for alternative energies

    Science.gov (United States)

    Yar-Mukhamedova, Gulmira; Ved', Maryna; Sakhnenko, Nikolay; Koziar, Maryna

    2017-11-01

    Consistent patterns for electrodeposition of Co-Mo-Zr coatings from polyligand citrate-pyrophosphate bath were investigated. The effect of both current density amplitude and pulse on/off time on the quality, composition and surface morphology of the galvanic alloys were determined. It was established the coating Co-Mo-Zr enrichment by molybdenum with current density increasing up to 8 A dm-2 as well as the rising of pulse time and pause duration promotes the content of molybdenum because of subsequent chemical reduction of its intermediate oxides by hydrogen ad-atoms. It was found that the content of the alloying metals in the coating Co-Mo-Zr depends on the current density and on/off times extremely and maximum Mo and Zr content corresponds to the current density interval 4-6 A dm-2, on-/off-time 2-10 ms. Chemical resistance of binary and ternary coatings based on cobalt is caused by the increased tendency to passivity and high resistance to pitting corrosion in the presence of molybdenum and zirconium, as well as the acid nature of their oxides. Binary coating with molybdenum content not less than 20 at.% and ternary ones with zirconium content in terms of corrosion deep index are in a group ;very proof;. It was shown that Co-Mo-Zr alloys exhibits the greatest level of catalytic properties as cathode material for hydrogen electrolytic production from acidic media which is not inferior a platinum electrode. The deposits Co-Mo-Zr with zirconium content 2-4 at.% demonstrate high catalytic properties in the carbon(II) oxide conversion. This confirms the efficiency of materials as catalysts for the gaseous wastes purification and gives the reason to recommend them as catalysts for red-ox processes activating by oxygen as well as electrode materials for red-ox batteries.

  13. Mechanical Properties of Magnesium-Rare Earth Alloy Systems: A Review

    Directory of Open Access Journals (Sweden)

    Sravya Tekumalla

    2014-12-01

    Full Text Available Magnesium-rare earth based alloys are increasingly being investigated due to the formation of highly stable strengthening phases, activation of additional deformation modes and improvement in mechanical properties. Several investigations have been done to study the effect of rare earths when they are alloyed to pure magnesium and other Mg alloys. In this review, the mechanical properties of the previously investigated different magnesium-rare earth based binary alloys, ternary alloys and other higher alloys with more than three alloying elements are presented.

  14. Composition dependences of thermodynamical properties associated with Pb-free ternary, quaternary, and quinary solder systems

    Science.gov (United States)

    Dogan, A.; Arslan, H.

    2016-05-01

    In the present study, Chou's General Solution Model (GSM) has been used to predict the enthalpy and partial enthalpies of mixing of the liquid Ag-In-Sn ternary, Ag-In-Sn-Zn quaternary, and Ag-Au-In-Sn-Zn quinary systems. These are of technical importance to optimize lead-free solder alloys, in selected cross-sections: x In/ x Sn = 0.5/0.5 (ternary), Au-In0.1-Sn0.8-Zn0.1, Ag-In0.1-Sn0.8-Zn0.1 (quaternary), and t = x Au/ x In = 1, x In = x Sn = x Zn (quinary) at 1173, 773, and 773 K, respectively. Moreover, the activity of In content in the ternary alloy system Ag-In-Sn has been calculated and its result is compared with that determined from the experiment, while the activities of Ag contents associated with the alloys mentioned above have been calculated. The other traditional models such as of Colinet, Kohler, Muggianu, Toop, and Hillert are also included in calculations. Comparing those calculated from the proposed GSM with those determined from experimental measurements, it is seen that this model becomes considerably realistic in computerization for estimating thermodynamic properties in multicomponent systems.

  15. Measurement of Activity of Indium in Liquid Bi-In-Sn Alloys by EMF Method

    Science.gov (United States)

    Kumar, M. R.; Mohan, S.; Behera, C. K.

    2016-08-01

    The electrochemical technique based on a molten salt electrolyte galvanic cell has been used to measure the activity of indium in liquid Bi-In-Sn alloys in the temperature range of 723 K to 855 K along three ternary sections. The activity of tin in Bi-Sn binary alloys has also been measured by the same technique in the above temperature range. The activity of indium in Bi-In-Sn alloys shows negative deviation from Raoult's law for most of the compositions and slight positive deviations for a few indium-rich compositions. The ternary excess molar free energies have been calculated by Darken's treatment. Isoactivity curves at 813 K in the ternary Bi-In-Sn alloys were derived by combining the activity data of In-Sn and Bi-In alloys. The values of excess molar free energy obtained in this study are compared with those calculated from the Muggianu model at 813 K.

  16. On Some Ternary LCD Codes

    OpenAIRE

    Darkunde, Nitin S.; Patil, Arunkumar R.

    2018-01-01

    The main aim of this paper is to study $LCD$ codes. Linear code with complementary dual($LCD$) are those codes which have their intersection with their dual code as $\\{0\\}$. In this paper we will give rather alternative proof of Massey's theorem\\cite{8}, which is one of the most important characterization of $LCD$ codes. Let $LCD[n,k]_3$ denote the maximum of possible values of $d$ among $[n,k,d]$ ternary $LCD$ codes. In \\cite{4}, authors have given upper bound on $LCD[n,k]_2$ and extended th...

  17. Calculation of ternary Si-Fe-Al phase equilibrium in vacuum distillation by molecular interaction volume model

    Directory of Open Access Journals (Sweden)

    Liu K.

    2014-01-01

    Full Text Available The vacuum distillation of aluminum from Si-Fe-Al ternary alloy with high content of Al is studied by a molecular interaction volume model (MIVM in this paper. The vapor-liquid phase equilibrium of the Si-Fe-Al system in vacuum distillation has been calculated using only the properties of pure components and the activity coefficients. A significant advantage of the model lies in its ability to predict the thermodynamic properties of liquid alloys using only binary infinite dilution activity coefficients. The thermodynamic activities and activity coefficients of components of the related Si-Fe, Si- Al and Fe-Al binary and the Si-Fe-Al ternary alloy systems are calculated based on the MIVM. The computational activity values are presented graphically, and evaluated with the reported experiment data in the literature, which shows that the prediction effect of the proposed model is of stability and reliability.

  18. Superconducting state parameters of ternary metallic glasses

    Indian Academy of Sciences (India)

    Administrator

    pseudopotential to ternary metallic glasses involves the assumption of pseudoions with average properties, which are assumed to replace three types of ions in the ternary systems, and a gas of free electrons is assumed to perme- ate through them. The electron–pseudoion is accounted by the pseudopotential, and the ...

  19. Ternary rhythm and the lapse constraint

    NARCIS (Netherlands)

    Elenbaas, N.; Kager, R.W.J.

    2004-01-01

    Ternary rhythmic systems differ from binary systems in stressing every third syllable in a word, rather than every second. Ternary rhythm is well-established for only a small group of languages, including Chugach Alutiiq, Cayuvava, and Estonian, and possibly Winnebago. Nevertheless the stress

  20. High-Efficient Circuits for Ternary Addition

    Directory of Open Access Journals (Sweden)

    Reza Faghih Mirzaee

    2014-01-01

    Full Text Available New ternary adders, which are fundamental components of ternary addition, are presented in this paper. They are on the basis of a logic style which mostly generates binary signals. Therefore, static power dissipation reaches its minimum extent. Extensive different analyses are carried out to examine how efficient the new designs are. For instance, the ternary ripple adder constructed by the proposed ternary half and full adders consumes 2.33 μW less power than the one implemented by the previous adder cells. It is almost twice faster as well. Due to their unique superior characteristics for ternary circuitry, carbon nanotube field-effect transistors are used to form the novel circuits, which are entirely suitable for practical applications.

  1. Heat storage in alloy transformations

    Science.gov (United States)

    Birchenall, C. E.

    1980-01-01

    The feasibility of using metal alloys as thermal energy storage media was investigated. The elements selected as candidate media were limited to aluminum, copper, magnesium, silicon, zinc, calcium, and phosphorus on the basis of low cost and latent heat of transformation. Several new eutectic alloys and ternary intermetallic phases were determined. A new method employing X-ray absorption techniques was developed to determine the coefficients of thermal expansion of both the solid and liquid phases and the volume change during phase transformation. The method and apparatus are discussed and the experimental results are presented for aluminum and two aluminum-eutectic alloys. Candidate materials were evaluated to determine suitable materials for containment of the metal alloys. Graphite was used to contain the alloys during the volume change measurements. Silicon carbide was identified as a promising containment material and surface-coated iron alloys were also evaluated. System considerations that are pertinent if alloy eutectics are used as thermal energy storage media are discussed. Potential applications to solar receivers and industrial furnaces are illustrated schematically.

  2. Optical characterization of one-step synthesis of ternary nanoalloy by laser ablation of stainless steel target in Hexane

    Science.gov (United States)

    Soliman, Wafaa; El-Ansary, Sara; Badr, Yehia

    2017-12-01

    In this work, we ablated stainless steel target in Hexane by 355 nm by tuning laser power to synthesize ternary nanoalloys from its constituents. XRD patterns didn't match with any machine code of carbides, carbonyls and oxides of target elements. Also, they didn't match with any of binary alloys, suggesting the formation of carbides or carbonyls of ternary nanoalloys. In addition, the optical properties of nanoalloys confirms the resonance fluorescence and multistep excitation. By tuning laser power, the shape of nanoalloys is controlled.

  3. A high-throughput search for new ternary superalloys

    Science.gov (United States)

    Nyshadham, Chandramouli; Hansen, Jacob; Oses, Corey; Curtarolo, Stefano; Hart, Gus

    In 2006 an unexpected new superalloy, Co3[Al,W], was discovered. This new alloy is cobalt-based, in contrast to conventional superalloys, which are nickel-based. Inspired by this new discovery, we performed first-principles calculations, searching through 2224 ternary metallic systems of the form A3[B0.5C0.5], where A = Ni/Co/Fe and [B, C] = all binary combinations of 40 different elements chosen from the periodic table. We found 175 new systems that are better than the Co3[Al, W] superalloy. 75 of these systems are brand new--they have never been reported in experimental literature. These 75 new potential superalloys are good candidates for further experiments. Our calculations are consistent with current experimental literature where data exists. Work supported under: ONR (MURI N00014-13-1-0635).

  4. A study of phase separation in ternary alloys

    Indian Academy of Sciences (India)

    Unknown

    BB. A. 2. AB. B. 2. BB c. K c. K cf. M. ∇. −. ∇. −. ∂∂∇. +. (4) where Mij are the effective mobilities; KAA = KA + KC,. KBB = KB + KC and KAB = KBA = KC. We have used a characteristic length l* = Tk. K. B. 2/1. A. 2/)*( and a chara- cteristic time, t* = )**/. (. 2. AA. B l. MTk to render the above equations non-dimensional; the ...

  5. Ternary alloy material prediction using genetic algorithm and cluster expansion

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chong [Iowa State Univ., Ames, IA (United States)

    2015-12-01

    This thesis summarizes our study on the crystal structures prediction of Fe-V-Si system using genetic algorithm and cluster expansion. Our goal is to explore and look for new stable compounds. We started from the current ten known experimental phases, and calculated formation energies of those compounds using density functional theory (DFT) package, namely, VASP. The convex hull was generated based on the DFT calculations of the experimental known phases. Then we did random search on some metal rich (Fe and V) compositions and found that the lowest energy structures were body centered cube (bcc) underlying lattice, under which we did our computational systematic searches using genetic algorithm and cluster expansion. Among hundreds of the searched compositions, thirteen were selected and DFT formation energies were obtained by VASP. The stability checking of those thirteen compounds was done in reference to the experimental convex hull. We found that the composition, 24-8-16, i.e., Fe3VSi2 is a new stable phase and it can be very inspiring to the future experiments.

  6. Corrosion resistance improvement of titanium base alloys

    Directory of Open Access Journals (Sweden)

    Mihai V. Popa

    2010-01-01

    Full Text Available The corrosion resistance of the new Ti-6Al-4V-1Zr alloy in comparison with ternary Ti-6Al-4V alloy in Ringer-Brown solution and artificial Carter-Brugirard saliva of different pH values was studied. In Ringer-Brown solution, the new alloy presented an improvement of all electrochemical parameters due to the alloying with Zr; also, impedance spectra revealed better protective properties of its passive layer. In Carter-Brugirard artificial saliva, an increase of the passive film thickness was proved. Fluoride ions had a slight negative influence on the corrosion and ion release rates, without to affect the very good stability of the new Ti-6Al-4V-1Zr alloy.

  7. Performance Estimation for Lowpass Ternary Filters

    Directory of Open Access Journals (Sweden)

    Brenton Steele

    2003-11-01

    Full Text Available Ternary filters have tap values limited to −1, 0, or +1. This restriction in tap values greatly simplifies the multipliers required by the filter, making ternary filters very well suited to hardware implementations. Because they incorporate coarse quantisation, their performance is typically limited by tap quantisation error. This paper derives formulae for estimating the achievable performance of lowpass ternary filters, thereby allowing the number of computationally intensive design iterations to be reduced. Motivated by practical communications systems requirements, the performance measure which is used is the worst-case stopband attenuation.

  8. Experimental investigation of phase equilibria in the Zr-Cu-Ni ternary system

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Mujin; Wang, Cuiping; Yang, Shuiyuan; Shi, Zhan; Han, Jiajia; Liu, Xingjun [Xiamen Univ. (China). College of Materials and Fujian Provincial Key Lab. of Materials Genome

    2017-08-15

    The phase equilibria in the Zr-Cu-Ni ternary system are investigated combined with X-ray diffraction, electron probe micro-analysis and differential scanning calorimetry. Two isothermal sections of the Zr-Cu-Ni ternary system at 1 000 C and 1 100 C are experimentally established. Most of the binary intermetallic compounds, e.g. Zr{sub 7}Ni{sub 10}, ZrNi, ZrNi{sub 5}, Zr{sub 14}Cu{sub 51}, and Zr{sub 2}Cu{sub 9}, show a remarkable ternary solubility. A new ternary compound named τ{sub 3} (Zr{sub 31.1-30.7} . Cu{sub 28.5-40.3}Ni{sub 40.4-29.0}) is detected at 1 000 C and dissolved at 1 020 C because the nearby large liquid phase field further expands. The newly determined phase equilibria will provide important information for both thermodynamic assessment and alloy design of Zr-based metallic glass.

  9. Synthesis, structural and magnetic characterization of soft magnetic nanocrystalline ternary FeNiCo particles

    Energy Technology Data Exchange (ETDEWEB)

    Toparli, Cigdem [Department of Metallurgical & Materials Eng., Istanbul Technical University, 34469 Istanbul (Turkey); Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf (Germany); Ebin, Burçak [Department of Metallurgical & Materials Eng., Istanbul Technical University, 34469 Istanbul (Turkey); Nuclear Chemistry and Industrial Material Recycling, Department of Chemistry and Chemical Engineering, Chalmers University of Technology, S-412 96 Gothenburg (Sweden); Gürmen, Sebahattin, E-mail: gurmen@itu.edu.tr [Department of Metallurgical & Materials Eng., Istanbul Technical University, 34469 Istanbul (Turkey)

    2017-02-01

    The present study focuses on the synthesis, microstructural and magnetic properties of ternary FeNiCo nanoparticles. Nanocrystalline ternary FeNiCo particles were synthesized via hydrogen reduction assisted ultrasonic spray pyrolysis method in single step. The effect of precursor concentration on the morphology and the size of particles was investigated. The syntheses were performed at 800 °C. Structure, morphology and magnetic properties of the as-prepared products were characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) studies. Scherer calculation revealed that crystallite size of the ternary particles ranged between 36 and 60 nm. SEM and TEM investigations showed that the particle size was strongly influenced by the precursor concentration and Fe, Ni, Co elemental composition of individual particles was homogeneous. Finally, the soft magnetic properties of the particles were observed to be a function of their size. - Highlights: • Ternary FeNiCo alloy nanocrystalline particles were synthesized in a single step. • Cubic crystalline structure and spherical morphology was observed by XRD, SEM and TEM investigations. • The analysis of magnetic properties indicates the soft magnetic features of particles.

  10. Theoretical prediction and experimental confirmation of unusual ternary ordered semiconductor compounds in Sr-Pb-S system.

    Science.gov (United States)

    Hao, Shiqiang; Zhao, Li-Dong; Chen, Chang-Qiang; Dravid, Vinayak P; Kanatzidis, Mercouri G; Wolverton, Christopher M

    2014-01-29

    We examine the thermodynamics of phase separation and ordering in the ternary Ca(x)Pb(1-x)S and Sr(x)Pb(1-x)S systems by density-functional theory combined with a cluster expansion and Monte Carlo simulations. Similar to most other ternary III-V or IV-VI semiconductor alloys, we find that bulk phase separation is thermodynamically preferred for PbS-CaS. However, we predict the surprising existence of stable, ordered ternary compounds in the PbS-SrS system. These phases are previously unreported ordered rocksalt-based compounds: SrPb3S4, SrPbS2, and Sr3PbS4. The stability of these predicted ordered phases is confirmed by transmission electron microscopy observations and band gap measurements. We believe this work paves the way for a combined theory-experiment approach to decipher complex phase relations in multicomponent chalcogenide systems.

  11. Ternary networks reliability and Monte Carlo

    CERN Document Server

    Gertsbakh, Ilya; Vaisman, Radislav

    2014-01-01

    Ternary means “based on three”. This book deals with reliability investigations of  networks whose components subject to failures can be in three states –up, down and middle (mid), contrary to traditionally considered networks  having only binary (up/down) components. Extending binary case to ternary allows to consider more realistic and flexible models for communication, flow and supply networks.

  12. Internal oxidation of laminated ternary Ru-Ta-Zr coatings

    Science.gov (United States)

    Chen, Yung-I.; Lu, Tso-Shen

    2015-10-01

    Researchers have observed the internal oxidation phenomenon in binary alloy coatings when developing refractory alloy coatings for protective purposes by conducting annealing at high temperatures and in oxygen-containing atmospheres. The coatings were assembled using cyclical gradient concentration deposition during cosputtering by employing a substrate holder rotating at a slow speed. The internally oxidized zone demonstrated a laminated structure, comprising alternating oxygen-rich and oxygen-deficient layers stacked in a general orientation. In the current study, Ru-Ta-Zr coatings were prepared with various stacking sequences during cosputtering. The Ru-Ta-Zr coatings were annealed at 600 °C in an atmosphere continuously purged with 1% O2-99% Ar mixed gas for 30 min. A transmission electron microscope was used to examine the periods of the laminated layers and crystallinity of the annealed coatings. Depth profiles produced using an Auger electron spectroscope and X-ray photoelectron spectroscope were used to certify the periodic variation of the related constituents and chemical states of the elements, respectively. The results indicate that the internally oxidized ternary coatings are stacked of Ru-, Ta2O5-, and ZrO2-dominant sublayers and that the stacking sequences of the sublayers affect the crystalline structure of the coatings. Zr is oxidized preferentially in the Ru-Ta-Zr coatings, increasing the surface hardness of the oxidized coatings.

  13. Undercooling and demixing of copper-based alloys

    DEFF Research Database (Denmark)

    Kolbe, M.; Brillo, J.; Egry, I.

    2006-01-01

    Since the beginning of materials science research under microgravity conditions immiscible alloys have been an interesting subject. New possibilities to investigate such systems are offered by containerless processing techniques. Of particular interest is the ternary system Cu-Fe-Co, and its...

  14. Reduction in thermal conductivity of Bi–Te alloys through grain ...

    Indian Academy of Sciences (India)

    Ternary alloys of thermoelectric materials Bi–Sb–Te and Bi–Se–Te of molecular formula, Bi0.5Sb1.5Te3 ( type) and Bi0.36Se0.064Te0.576 ( type), were prepared by mechanical alloying method. The preparation of materials by mechanical alloying method has effectively reduced the thermal conductivity by generating a ...

  15. Growth and characterization of III-N ternary thin films by plasma assisted atomic layer epitaxy at low temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Nepal, Neeraj; Anderson, Virginia R.; Hite, Jennifer K.; Eddy, Charles R.

    2015-08-31

    We report the growth and characterization of III-nitride ternary thin films (Al{sub x}Ga{sub 1−x}N, In{sub x}Al{sub 1−x}N and In{sub x}Ga{sub 1−x}N) at ≤ 500 °C by plasma assisted atomic layer epitaxy (PA-ALE) over a wide stoichiometric range including the range where phase separation has been an issue for films grown by molecular beam epitaxy and metal organic chemical vapor deposition. The composition of these ternaries was intentionally varied through alterations in the cycle ratios of the III-nitride binary layers (AlN, GaN, and InN). By this digital alloy growth method, we are able to grow III-nitride ternaries by PA-ALE over nearly the entire stoichiometry range including in the spinodal decomposition region (x = 15–85%). These early efforts suggest great promise of PA-ALE at low temperatures for addressing miscibility gap challenges encountered with conventional growth methods and realizing high performance optoelectronic and electronic devices involving ternary/binary heterojunctions, which are not currently possible. - Highlights: • III-N ternaries grown at ≤ 500 °C by plasma assisted atomic layer epitaxy • Growth of InGaN and AlInN in the spinodal decomposition region (15–85%) • Epitaxial, smooth and uniform III-N film growth at low temperatures.

  16. Pulse reversal plating of nickel alloys

    DEFF Research Database (Denmark)

    Tang, Peter Torben

    2007-01-01

    Pulse plating has previously been reported to improve the properties of nickel and nickel alloy deposits. Typically, focus has been on properties such as grain size, hardness and smoothness. When pulse plating is to be utilised for microtechnologies such as microelectromechanical systems (MEMS......), internal stress and material distribution are even more important. With baths based upon nickel chloride, and nickel and cobalt chlorides, pulse reversal plating of both pure nickel and nickel-cobalt alloys has been used to fabricate tools for microinjection moulding. Pulse reversal plating of ternary soft...

  17. Study on La–Mg based ternary system for hydrogen storage

    Energy Technology Data Exchange (ETDEWEB)

    Capurso, Giovanni, E-mail: giovanni.capurso@gmail.com [Dipartimento di Ingegneria Industriale, Università di Padova, via Marzolo 9, 35131 Padova (Italy); Naik, Mehraj-ud-din; Lo Russo, Sergio [Dipartimento di Fisica e Astronomia “Galileo Galilei”, Università di Padova, via Marzolo 8, 35131 Padova (Italy); Maddalena, Amedeo [Dipartimento di Ingegneria Industriale, Università di Padova, via Marzolo 9, 35131 Padova (Italy); Saccone, Adriana; Gastaldo, Federica; De Negri, Serena [Dipartimento di Chimica e Chimica Industriale, Università di Genova, via Dodecaneso 31, 16146 Genova (Italy)

    2013-12-15

    Highlights: ► Explorative study in the Mg-rich corner of the La–Pd–Mg ternary system. ► The studied alloys lay on the La{sub 2}(Mg{sub 1−x}Pd{sub x}){sub 17} compositional line. ► Higher Pd content results in lower H{sub 2} capacity, but higher equilibrium pressures. ► The highest absorbed hydrogen quantity is 4.8 wt% at 2 MPa and 310 °C. -- Abstract: An explorative study on the hydriding/dehydriding characteristics of the La{sub 2}(Mg,Pd){sub 17} ternary alloy, with different Pd content, is presented. All the samples were prepared by induction melting of the selected elements, characterized with scanning electron microscopy and X-ray powder diffraction, to detect present phases, and subsequently milled with a high-energy shaker apparatus. The hydrogen reaction kinetics and thermodynamics properties have been investigated by means of a volumetric Sievert’s apparatus. The measured H{sub 2} gravimetric capacity of the alloy varied with the Pd content, being the highest for the sample without Pd (>4.5 wt%). A possible correlation between the constituent phases individuated with microanalysis and the variation in the hydrogenation behaviour is proposed.

  18. Insight of magnesium alloys and composites for orthopedic implant applications – a review

    Directory of Open Access Journals (Sweden)

    R Radha

    2017-09-01

    Full Text Available Magnesium (Mg and its alloys have been widely researched for orthopedic applications recently. Mg alloys have stupendous advantages over the commercially available stainless steel, Co-Cr-Ni alloy and titanium implants. Till date, extensive mechanical, in-vitro and in-vivo studies have been done to improve the biomedical performance of Mg alloys through alloying, processing conditions, surface modification etc. This review comprehensively describes the strategies for improving the mechanical and degradation performance of Mg alloys through properly tailoring the composition of alloying elements, reinforcements and processing techniques. It also highlights the status and progress of research in to (i the selection of nutrient elements for alloying, reinforcement and its effects (ii type of Mg alloy system (binary, ternary and quaternary and composites (iii grain refinement for strengthening through severe plastic deformation techniques. Furthermore it also emphasizes on the importance of Mg composites with regard to hard tissue applications.

  19. Pd-Cu-M (M = Y, Ti, Zr, V, Nb, and Ni) Alloys for the Hydrogen Separation Membrane.

    Science.gov (United States)

    Nayebossadri, Shahrouz; Speight, John D; Book, David

    2017-01-25

    Self-supported fcc Pd-Cu-M (M = Y, Ti, Zr, V, Nb, and Ni) alloys were studied as potential hydrogen purification membranes. The effects of small additions (1-2.6 at. %) of these elements on the structure, hydrogen solubility, diffusivity, and permeability were examined. Structural analyses by X-ray diffraction (XRD) showed the fcc phase for all alloys with induced textures from cold rolling. Heat treatment at 650 °C for 96 h led to the reorientation in all alloys except the Pd-Cu-Zr alloy, exhibiting the possibility to enhance the structural stability by Zr addition. Hydrogen solubility was almost doubled in the ternary alloys containing Y and Zr compared to Pd65.1Cu34.9 alloy at 300 °C. It was noted that hydrogen diffusivity is decreased upon additions of these elements compared to the Pd65.1Cu34.9 alloy, with the Pd-Cu-Zr alloy showing the lowest hydrogen diffusivity. However, the comparable hydrogen permeability of the Pd-Cu-Zr alloy with the corresponding binary alloy, as well as its highest hydrogen permeability among the studied ternary alloys at temperatures higher than 300 °C, suggested that hydrogen permeation of these alloys within the fcc phase is mainly dominated by hydrogen solubility. Hydrogen flux variations of all ternary alloys were studied and compared with the Pd65.1Cu34.9 alloy under 1000 ppm of H2S + H2 feed gas. Pd-Cu-Zr alloy showed superior resistance to the sulfur poisoning probably due to the less favorable H2S-surface interaction and more importantly slower rate of bulk sulfidation as a result of improved structural stability upon Zr addition. Therefore, Pd-Cu-Zr alloys may offer new potential hydrogen purification membranes with improved chemical stability and hydrogen permeation compared to the binary fcc Pd-Cu alloys.

  20. Design of lead-free candidate alloys for high-temperature soldering based on the Au–Sn system

    DEFF Research Database (Denmark)

    Chidambaram, Vivek; Hattel, Jesper Henri; Hald, John

    2010-01-01

    of the Au–Sn binary system were explored in this work. Furthermore, the effects of thermal aging on the microstructure and microhardness of these promising Au–Sn based ternary alloys were investigated. For this purpose, the candidate alloys were aged at a lower temperature, 150°C for up to 1week...

  1. Calculation of the thermodynamic properties of liquid Ag–In–Sb alloys

    Directory of Open Access Journals (Sweden)

    DRAGANA ZIVKOVIC

    2006-03-01

    Full Text Available The results of calculations of the thermodynamic properties of liquid Ag–In–Sb alloys are presented in this paper. The Redlich–Kister–Muggianu model was used for the calculations. Based on known thermodynamic data for constitutive binary systems and available experimental data for the investigated ternary system, the ternary interaction parameter for the liquid phase in the temperature range 1000–1200 K was determined. Comparison between experimental and calculated results showed their good mutual agreement.

  2. Heat storage in alloy transformations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Birchenall, C E; Gueceri, S I; Farkas, D; Labdon, M B; Nagaswami, N; Pregger, B

    1981-03-01

    A study conducted to determine the feasibility of using metal alloys as thermal energy storage media is described. The study had the following major elements: (1) the identification of congruently transforming alloys and thermochemical property measurements, (2) the development of a precise and convenient method for measuring volume change during phase transformation and thermal expansion coefficients, (3) the development of a numerical modeling routine for calculating heat flow in cylindrical heat exchangers containing phase-change materials, and (4) the identification of materials that could be used to contain the metal alloys. The elements selected as candidate media were limited to aluminum, copper, magnesium, silicon, zinc, calcium, and phosphorus on the basis of low cost and latent heat of transformation. Several new eutectic alloys and ternary intermetallic phases have been determined. A new method employing x-ray absorption techniques was developed to determine the coefficients of thermal expansion of both the solid and liquid phases and the volume change during phase transformation from data that are obtained during one continuous experimental test. The method and apparatus are discussed and the experimental results are presented. The development of the numerical modeling method is presented and results are discussed for both salt and metal alloy phase-change media. Candidate materials were evaluated to determine suitable materials for containment of the metal alloys. Graphite was used to contain the alloys during the volume change measurements. Silicon carbide has been identified as a promising containment material and surface-coated iron alloys were considered.

  3. Ternary interaction parameters in calphad solution models

    Energy Technology Data Exchange (ETDEWEB)

    Eleno, Luiz T.F., E-mail: luizeleno@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Fisica; Schön, Claudio G., E-mail: schoen@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Computational Materials Science Laboratory. Department of Metallurgical and Materials Engineering

    2014-07-01

    For random, diluted, multicomponent solutions, the excess chemical potentials can be expanded in power series of the composition, with coefficients that are pressure- and temperature-dependent. For a binary system, this approach is equivalent to using polynomial truncated expansions, such as the Redlich-Kister series for describing integral thermodynamic quantities. For ternary systems, an equivalent expansion of the excess chemical potentials clearly justifies the inclusion of ternary interaction parameters, which arise naturally in the form of correction terms in higher-order power expansions. To demonstrate this, we carry out truncated polynomial expansions of the excess chemical potential up to the sixth power of the composition variables. (author)

  4. Ternary carbon composite films for supercapacitor applications

    Science.gov (United States)

    Tran, Minh-Hai; Jeong, Hae Kyung

    2017-09-01

    A simple, binder-free, method of making supercapacitor electrodes is introduced, based on modification of activated carbon with graphite oxide and carbon nanotubes. The three carbon precursors of different morphologies support each other to provide outstanding electrochemical performance, such as high capacitance and high energy density. The ternary carbon composite shows six times higher specific capacitance compared to that of activated carbon itself with high retention. The excellent electrochemical properties of the ternary composite attribute to the high surface area of 1933 m2 g-1 and low equivalent series resistance of 2 Ω, demonstrating that it improve the electrochemical performance for supercapacitor applications.

  5. Effect of alloying on elastic properties of ZrN based transition metal nitride alloys

    KAUST Repository

    Kanoun, Mohammed

    2014-09-01

    We report the effect of composition and metal sublattice substitutional element on the structural, elastic and electronic properties of ternary transition metal nitrides Zr1-xMxN with M=Al, Ti, Hf, V, Nb, W and Mo. The analysis of the elastic constants, bulk modulus, shear modulus, Young\\'s modulus, and Poisson\\'s ratio provides insights regarding the mechanical behavior of Zr1-xMxN. We predict that ternary alloys are more ductile compared to their parent binary compounds. The revealed trend in the mechanical behavior might help for experimentalists on the ability of tuning the mechanical properties during the alloying process by varying the concentration of the transition metal. © 2014 Elsevier B.V.

  6. Pulse Reversal Plating of Nickel and Nickel Alloys for MEMS

    DEFF Research Database (Denmark)

    Tang, Peter Torben

    2001-01-01

    Pulse plating has previously been reported to improve the properties of nickel and nickel alloy deposits. Typically, focus has been on properties such as grain size, hardness and smoothness. When pulse plating is to be utilized for micro electromechanical systems (MEMS), internal stress...... and material distribution is even more important. Using a bath consisting mostly of nickel chloride, pulse reversal plating of both pure nickel and nickel-cobalt alloys has been used to fabricate tools for micro-injection molding. Pulse reversal plating of ternary soft-magnetic alloys, comprising 45-65 percent...

  7. Nb-Based Nb-Al-Fe Alloys: Solidification Behavior and High-Temperature Phase Equilibria

    Science.gov (United States)

    Stein, Frank; Philips, Noah

    2017-09-01

    High-melting Nb-based alloys hold significant promise for the development of novel high-temperature materials for structural applications. In order to understand the effect of alloying elements Al and Fe, the Nb-rich part of the ternary Nb-Al-Fe system was investigated. A series of Nb-rich ternary alloys were synthesized from high-purity Nb, Al, and Fe metals by arc melting. Solidification paths were identified and the liquidus surface of the Nb corner of the ternary system was established by analysis of the as-melted microstructures and thermal analysis. Complementary analysis of heat-treated samples yielded isothermal sections at 1723 K and 1873 K (1450 °C and 1600 °C).

  8. Effect of scandium addition on the microstructure, mechanical and wear properties of the spray formed hypereutectic aluminum–silicon alloys

    Energy Technology Data Exchange (ETDEWEB)

    Raghukiran, Nadimpalli; Kumar, Ravi, E-mail: nvrk@iitm.ac.in

    2015-08-12

    Hypereutectic Al–x%Si–0.8Sc alloys (x=13, 16, 19 and 22 wt%) were produced by spray forming. The microstructures of all the alloys exhibited very fine silicon phase with average size of about 5–10 µm irrespective of the silicon content of the alloy. Transmission electron microscopy revealed the presence of a nano-scale scandium rich phase, identified as AlSi{sub 2}Sc{sub 2} (V-phase) uniformly distributed in the alloy. The presence of V-phase resulted in higher matrix hardness (1.34 GPa) in contrast to 1.04 GPa observed in the case of binary Al–Si alloys by nanoindentation. Isothermal heat treatment at 375 °C revealed insignificant coarsening of silicon phase in both binary and ternary alloys. The Al–x%Si–0.8Sc alloys exhibited higher flow stress and tensile strength in contrast to their binary alloy counterparts which was attributed to the bi-modal size distribution of the strengthening phases in the form of nano-scale V-phase and sub-micron to 10 µm size silicon particles. The pin-on-disk wear tests exhibited appreciable improvement in the wear performance of the relatively low-silicon content ternary alloys over their binary counterparts while the high-silicon content binary and ternary alloys exhibited no much difference in the wear performance.

  9. Ternary-fragmentation-driving potential energies of 252Cf

    Science.gov (United States)

    Karthikraj, C.; Ren, Zhongzhou

    2017-12-01

    Within the framework of a simple macroscopic model, the ternary-fragmentation-driving potential energies of 252Cf are studied. In this work, all possible ternary-fragment combinations of 252Cf are generated by the use of atomic mass evaluation-2016 (AME2016) data and these combinations are minimized by using a two-dimensional minimization approach. This minimization process can be done in two ways: (i) with respect to proton numbers (Z1, Z2, Z3) and (ii) with respect to neutron numbers (N1, N2, N3) of the ternary fragments. In this paper, the driving potential energies for the ternary breakup of 252Cf are presented for both the spherical and deformed as well as the proton-minimized and neutron-minimized ternary fragments. From the proton-minimized spherical ternary fragments, we have obtained different possible ternary configurations with a minimum driving potential, in particular, the experimental expectation of Sn + Ni + Ca ternary fragmentation. However, the neutron-minimized ternary fragments exhibit a driving potential minimum in the true-ternary-fission (TTF) region as well. Further, the Q -value energy systematics of the neutron-minimized ternary fragments show larger values for the TTF fragments. From this, we have concluded that the TTF region fragments with the least driving potential and high Q values have a strong possibility in the ternary fragmentation of 252Cf. Further, the role of ground-state deformations (β2, β3, β4, and β6) in the ternary breakup of 252Cf is also studied. The deformed ternary fragmentation, which involves Z3=12 -19 fragments, possesses the driving potential minimum due to the larger oblate deformations. We also found that the ground-state deformations, particularly β2, strongly influence the driving potential energies and play a major role in determining the most probable fragment combinations in the ternary breakup of 252Cf.

  10. Effect of the third element on the structure of liquid Mg65Cu25Y10 alloy

    Science.gov (United States)

    Liu, Dan; Zhu, Xun Ming; Qin, Jing Yu; Duan, Jun Peng; Wang, Ai Min; Gu, Ting Kun

    2016-08-01

    The liquid structures of Mg65Cu25Y10 and its three homologous binary liquid alloys are investigated via ab initio molecular dynamics in the present work. The chemical and topological environments in all four liquid alloys are analyzed using pair distribution function, coordination number, and the Voronoi polyhedron. It shows that the Cu atoms play significant role in deciding the chemical and topological short-range orders of the Mg65Cu25Y10 liquid alloy. The Voronoi polyhedra in the ternary liquid alloy illustrate less varieties and longer lifetime. Moreover, the diffusion coefficients are decreased significantly in the ternary liquid alloys according to the mean square displacements. All above offer a deeper insight into how the three species work in the Mg65Cu25Y10 liquid alloy.

  11. Self-triggered coordination with ternary controllers

    NARCIS (Netherlands)

    De Persis, Claudio; Frasca, Paolo

    2012-01-01

    This paper regards coordination of networked systems with ternary controllers. We develop a hybrid coordination system which implements a self-triggered communication policy, based on polling the neighbors upon need. We prove that the proposed scheme ensures finite-time convergence to a neighborhood

  12. Ternary Dynamic Images In Robotic Smooth Pursuit

    Science.gov (United States)

    Morasso, Pietro; Tagliasco, Vincenzo

    1984-02-01

    Early stages of visuo-motor interaction are considered with regard to dynamic scene analysis. Target fixation and tracking is distinguished from target visual analysis. The notion of target specification is elaborated upon. The use of ternary dynamic images is shown as an example of target tracking.

  13. Experimental investigation of phase equilibria in the Co-Ni-Zr ternary system

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xingjun; Yang, Shuiyuan; Yu, Wenjie; Wang, Cuiping [Xiamen Univ. (China). Fujian Key Laboratory of Materials Genome; Xiong, Huaping; Cheng, Yaoyong; Wu, Xin [Beijing Institute of Aeronautical Materials (China). Div. of Welding and Forging

    2016-10-15

    The phase equilibria of the Co-Ni-Zr ternary system at 1 000 C, 1 100 C and 1 200 C were experimentally investigated by means of back-scattered electron imaging, electron probe microanalysis and X-ray diffraction on the equilibrated ternary alloys. In this study, no ternary compound is found. The (αCo, Ni) phase region extends from the Ni-rich corner to the Co-rich corner with small solubility of Zr at three sections. At 1 000 C and 1 100 C, Ni{sub 5}Zr, Co{sub 2}Zr and Ni{sub 10}Zr{sub 7} phases have large solid solution ranges, but Ni{sub 10}Zr{sub 7} phase disappears at 1 200 C. The Ni{sub 7}Zr{sub 2}, NiZr, Co{sub 11}Zr{sub 2}, Co{sub 23}Zr{sub 6} and CoZr phases exhibit nearly linear compounds in the studied sections, and have large composition ranges. Additionally, some differences in phase relationship exist among the above three isothermal sections.

  14. The analysis of fuel constituent redistribution for ternary metallic fuel slug

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byoung Oon; Lee, Dong Uk; Kim, Young Kyun; Chang, Jin Wook; Lee, Ki Bok; Kim, Young Il

    2004-02-01

    U-TRU-Zr metallic alloy is being considered as the fuel slug for the proliferation resistance core of KALIMER. The radial fuel constituent migration is a general phenomenon in the metallic alloys. This phenomenon may affect the in-reactor performance of metallic fuel rods, influencing such factors as melting temperature, thermal conductivity, power generation rate, phase boundaries and eutectic melting of the fuel slug. Thus, constituent redistribution modeling is essential when developing a metallic fuel performance code. The constituent migration model adopted in this report was based on the Ishida's model and Hofman's theory. A subroutine program has been made and installed into the MACSIS code to simulate constituent redistribution. The radial profile of Zr redistribution was calculated for the ternary metallic fuel, and compared with the measured data.

  15. Development Program for Natural Aging Aluminum Casting Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Geoffrey K. Sigworth

    2004-05-14

    A number of 7xx aluminum casting alloys are based on the ternary Al-Zn-Mg system. These alloys age naturally to high strength at room temperature. A high temperature solution and aging treatment is not required. Consequently, these alloys have the potential to deliver properties nearly equivalent to conventional A356-T6 (Al-Si-Mg) castings, with a significant cost saving. An energy savings is also possible. In spite of these advantages, the 7xx casting alloys are seldom used, primarily because of their reputation for poor castibility. This paper describes the results obtained in a DOE-funded research study of these alloys, which is part of the DOE-OIT ''Cast Metals Industries of the Future'' Program. Suggestions for possible commercial use are also given.

  16. Functional and structural fatigue of titanium tantalum high temperature shape memory alloys (HT SMAs)

    Energy Technology Data Exchange (ETDEWEB)

    Niendorf, T., E-mail: Thomas.Niendorf@iwt.tu-freiberg.de [Institute of Materials Engineering, Technische Universität Bergakademie Freiberg, 09599 Freiberg (Germany); Krooß, P. [Lehrstuhl für Werkstoffkunde (Materials Science), University of Paderborn, 33098 Paderborn (Germany); Batyrsina, E. [Institut für Werkstoffkunde (Materials Science), Leibniz Universität Hannover, 30823 Garbsen (Germany); Paulsen, A.; Motemani, Y.; Ludwig, A.; Buenconsejo, P.; Frenzel, J.; Eggeler, G. [Institut für Werkstoffe, Ruhr-Universität Bochum, 44801 Bochum (Germany); Maier, H.J. [Institut für Werkstoffkunde (Materials Science), Leibniz Universität Hannover, 30823 Garbsen (Germany)

    2015-01-03

    Due to their high work output and good mechanical properties, actuators made from shape memory alloys (SMAs) are used in numerous applications. Unfortunately, SMAs such as nickel–titanium (Ni–Ti) can only be employed at temperatures up to about 100 °C. Lately, high-temperature shape memory alloys (HT SMAs) have been introduced to overcome this limitation. Ternary systems based on Ni–Ti have been intensively characterized and alloys are available that can operate at elevated temperatures. However, these alloys either contain substantial amounts of expensive noble elements like platinum and palladium, or the materials are brittle. The titanium–tantalum (Ti–Ta) system has been developed to overcome these issues. Binary Ti–Ta provides relatively high M{sub S} temperature combined with excellent workability, but it suffers from fast cyclic degradation. By alloying with third elements this drawback can be overcome: The ternary Ti–Ta–Al alloy shows overall promising properties as will be shown in the present work. In-situ thermo-mechanical cycling experiments were conducted and allowed for evaluation of the factors affecting the functional and structural fatigue of this alloy. Functional fatigue is dominated by ω-phase evolution, while structural fatigue is triggered by an interplay of ω-phase induced embrittlement and deformation constraints imposed by unsuitable texture. In addition, a concept for fatigue life extension proposed very recently for binary Ti–Ta, is demonstrated to be also applicable for the ternary Ti–Ta–Al.

  17. Ternary rare earth-lanthanide sulfides

    Science.gov (United States)

    Takeshita, Takuo; Gschneidner, Jr., Karl A.; Beaudry, Bernard J.

    1987-01-06

    A new ternary rare earth sulfur compound having the formula: La.sub.3-x M.sub.x S.sub.4 where M is a rare earth element selected from the group europium, samarium and ytterbium and x=0.15 to 0.8. The compound has good high-temperature thermoelectric properties and exhibits long-term structural stability up to 1000.degree. C.

  18. Equilibrium study for ternary mixtures of biodiesel

    Science.gov (United States)

    Doungsri, S.; Sookkumnerd, T.; Wongkoblap, A.; Nuchitprasittichai, A.

    2017-11-01

    The liquid-liquid equilibrium (LLE) data for the ternary mixtures of methanol + fatty acid methyl ester (FAME) + palm oil and FAME + palm oil + glycerol at various temperatures from 35 to 55°C, the tie lines and binodial curves were also investigated and plotted in the equilibrium curve. The experimental results showed that the binodial curves of methanol + FAME + palm oil depended significantly with temperature while the binodial curves of FAME + palm oil + glycerol illustrated insignificant change with temperatures. The interaction parameters between liquid pair obtained for NRTL (Nonrandom Two-Liquid) and UNIQUAC (Universal Quasi-Chemical Theory) models from the experimental data were also investigated. It was found that the correlated parameters of UNIQUAC model for system of FAME + palm oil + glycerol, denoted as a13 and a31, were 580.42K and -123.69K, respectively, while those for system of methanol + FAME + palm oil, denoted as a42 and a24, were 71.48 K and 965.57K, respectively. The ternary LLE data reported here would be beneficial for engineers and scientists to use for prediction of yield and purity of biodiesel for the production. The UNIQUAC model agreed well with the experimental data of ternary mixtures of biodiesel.

  19. The Ternary Alpha Energy Distribution Revisited

    Science.gov (United States)

    Wagemans, Cyriel; Janssens, Peter; Heyse, Jan; Serot, Olivier; Geltenbort, Peter; Soldner, Torsten

    2004-02-01

    The shape of the energy distribution of the particles emitted in ternary fission has been studied since the discovery of the phenomenon for a large variety of fissioning systems. The general tendency of the observations is that most particles have a Gaussian-shaped energy distribution, except the α-particles, for which mostly an important non-Gaussian tailing on the low-energy side is reported. The origin of this tailing is generally ascribed to the decay of ternary 5He particles in an α-particle and a neutron. Since the experiments reported in the literature are rarely optimised for measuring the low-energy part of the α-spectrum, we realised good experimental conditions for studying the 235U(nth,f) ternary α energy distribution at the High Flux Reactor of the ILL in Grenoble. Thanks to a very intense and clean neutron beam, a small, very thin sample of highly enriched U could be used, with an activity of only 1.6 Bq. So the measurements could be done without absorber in between the sample and the ΔE-E detector. With the resulting low detection limit of 6 MeV, a clearly asymmetric energy distribution was obtained, in agreement with most data in the literature.

  20. More statistics on intermetallic compounds - ternary phases.

    Science.gov (United States)

    Dshemuchadse, Julia; Steurer, Walter

    2015-05-01

    How many different intermetallic compounds are known so far, and in how many different structure types do they crystallize? What are their chemical compositions, the most abundant ones and the rarest ones? These are some of the questions we are trying to find answers for in our statistical analysis of the structures of the 20,829 intermetallic phases included in the database Pearson's Crystal Data, with the goal of gaining insight into some of their ordering principles. In the present paper, we focus on the subset of 13,026 ternary intermetallics, which crystallize in 1391 different structure types; remarkably, 667 of them have just one representative. What makes these 667 structures so unique that they are not adopted by any other of the known intermetallic compounds? Notably, ternary compounds are known in only 5109 of the 85,320 theoretically possible ternary intermetallic systems so far. In order to get an overview of their chemical compositions we use structure maps with Mendeleev numbers as ordering parameters.

  1. Page 1 Structure and superconductivity in ternary systems of ...

    Indian Academy of Sciences (India)

    Structure and superconductivity in ternary systems of compounds 299. Erra B2 structure do not have T. above 1:2 K (Ku and Meisner 1981); (iii) for. Ao.67Pt3B the T. are 1-6, 28 and 56K for A = Ca,Sr and Ba (Shelton 1978) and. (iv) AOs B, A = Th, T = 3 K; A = Y, T = 6K (Ku 1980). 3. Ternary carbides. Of the known ternary ...

  2. Ternary q-Virasoro-Witt Hom-Nambu-Lie algebras

    Energy Technology Data Exchange (ETDEWEB)

    Ammar, F [Faculte des Sciences, Universite de Sfax, BP 1171, 3000 Sfax (Tunisia); Makhlouf, A [Laboratoire de Mathematiques, Informatique et Applications, Universite de Haute Alsace, 4, rue des Freres Lumiere F-68093 Mulhouse (France); Silvestrov, S, E-mail: Faouzi.Ammar@rnn.fss.t, E-mail: Abdenacer.Makhlouf@uha.f, E-mail: sergei.silvestrov@math.lth.s [Centre for Mathematical Sciences, Lund University, Box 118, SE-221 00 Lund (Sweden)

    2010-07-02

    In this paper we construct ternary q-Virasoro-Witt algebras which q-deform the ternary Virasoro-Witt algebras constructed by Curtright, Fairlie and Zachos using su(1, 1) enveloping algebra techniques. The ternary Virasoro-Witt algebras constructed by Curtright, Fairlie and Zachos depend on a parameter and are not Nambu-Lie algebras for all but finitely many values of this parameter. For the parameter values for which the ternary Virasoro-Witt algebras are Nambu-Lie, the corresponding ternary q-Virasoro-Witt algebras constructed in this paper are also Hom-Nambu-Lie because they are obtained from the ternary Nambu-Lie algebras using the composition method. For other parameter values this composition method does not yield a Hom-Nambu-Lie algebra structure for q-Virasoro-Witt algebras. We show however, using a different construction, that the ternary Virasoro-Witt algebras of Curtright, Fairlie and Zachos, as well as the general ternary q-Virasoro-Witt algebras we construct, carry a structure of the ternary Hom-Nambu-Lie algebra for all values of the involved parameters.

  3. Thermodynamic database of multi-component Mg alloys and its application to solidification and heat treatment

    Directory of Open Access Journals (Sweden)

    Guanglong Xu

    2016-12-01

    Full Text Available An overview about one thermodynamic database of multi-component Mg alloys is given in this work. This thermodynamic database includes thermodynamic descriptions for 145 binary systems and 48 ternary systems in 23-component (Mg–Ag–Al–Ca–Ce–Cu–Fe–Gd–K–La–Li–Mn–Na–Nd–Ni–Pr–Si–Sn–Sr–Th–Y–Zn–Zr system. First, the major computational and experimental tools to establish the thermodynamic database of Mg alloys are briefly described. Subsequently, among the investigated binary and ternary systems, representative binary and ternary systems are shown to demonstrate the major feature of the database. Finally, application of the thermodynamic database to solidification simulation and selection of heat treatment schedule is described.

  4. Lubricated sliding wear behaviour of Ni-P-W multilayered alloy coatings produced by pulse plating

    DEFF Research Database (Denmark)

    Panagopoulos, C. N.; Papachristos, V. D.; Christoffersen, Lasse

    2000-01-01

    The lubricated sliding wear behaviour of Ni-P-W multilayered alloy coatings sliding against hardened steel discs was studied, in a pin-on-disc set-up. The multilayered coatings had been deposited on mild steel pins by pulse plating and they consisted of ternary Ni-P-W layers of high and low W...

  5. Low alloy additions of iron, silicon, and aluminum to uranium: a literature survey

    Energy Technology Data Exchange (ETDEWEB)

    Ludwig, R.L.

    1980-12-31

    A survey of the literature has been made on the experimental results of small additions of iron, silicon, and aluminum to uranium. Information is also included on the constitution, mechanical properties, heat treatment, and deformation of various binary and ternary alloys. 42 references, 24 figures, 13 tables.

  6. Neutron Damage and MAX Phase Ternary Compounds

    Energy Technology Data Exchange (ETDEWEB)

    Barsoum, Michael [Drexel Univ., Philadelphia, PA (United States); Hoffman, Elizabeth [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Sindelar, Robert [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Garcua-Duaz, Brenda [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kohse, Gordon [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2014-06-17

    The Demands of Gen IV nuclear power plants for long service life under neutron radiation at high temperature are severe. Advanced materials that would withstand high temperatures (up to 1000+ C) to high doses in a neutron field would be ideal for reactor internal structures and would add to the long service life and reliability of the reactors. The objective of this work is to investigate the response of a new class of machinable, conductive, layered, ternary transition metal carbides and nitrides - the so-called MAX phases - to low and moderate neutron dose levels.

  7. Solidification processing of intermetallic Nb-Al alloys

    Science.gov (United States)

    Smith, Preston P.; Oliver, Ben F.; Noebe, Ronald D.

    1992-01-01

    Several Nb-Al alloys, including single-phase NbAl3 and the eutectic of Nb2Al and NbAl3, were prepared either by nonconsumable arc melting in Ar or by zone processing in He following initial induction melting and rod casting, and the effect of the solidification route on the microstructure and room-temperature mechanical properties of these alloys was investigated. Automated control procedures and melt conditions for directional solidification of NbAl3 and the Nb2Al/Nb3Al eutectic were developed; high purity and stoichiometry were obtained. The effects of ternary additions of Ti and Ni are described.

  8. Lead activity in Pb-Sb-Bi alloys

    Directory of Open Access Journals (Sweden)

    A. S. Kholkina

    2014-11-01

    Full Text Available The present work is devoted to the study of lead thermodynamic activity in the Pb-Sb-Bi alloys. The method for EMF measurements of the concentration cell: (–Pb|KCl-PbCl2¦¦KCl-PbCl2|Pb-(Sb-Bi(+ was used. The obtained concentration dependences of the galvanic cell EMF are described by linear equations. The lead activity in the ternary liquid-metal alloy demonstrates insignificant negative deviations from the behavior of ideal solutions.

  9. Balanced ternary addition using a gated silicon nanowire

    NARCIS (Netherlands)

    Mol, J.A.; Van der Heijden, J.; Verduijn, J.; Klein, M.; Remacle, F.; Rogge, S.

    2011-01-01

    Ternary logic has the lowest cost of complexity, here, we demonstrate a CMOS hardware implementation of a ternary adder using a silicon metal-on-insulator single electron transistor. Gate dependent rectifying behavior of a single electron transistor (SET) results in a robust three-valued output as a

  10. Density-Driven segregation in Binary and Ternary Granular Systems

    NARCIS (Netherlands)

    Windows-Yule, Kit; Parker, David

    2015-01-01

    We present a first experimental study of density-induced segregation within a three-dimensional, vibrofluidised, ternary granular system. Using Positron Emission Particle Tracking (PEPT), we study the steady-state particle distributions achieved by binary and ternary granular beds under a variety of

  11. A high-speed interconnect network using ternary logic

    DEFF Research Database (Denmark)

    Madsen, Jens Kargaard; Long, S. I.

    1995-01-01

    This paper describes the design and implementation of a high-speed interconnect network (ICN) for a multiprocessor system using ternary logic. By using ternary logic and a fast point-to-point communication technique called STARI (Self-Timed At Receiver's Input), the communication between...

  12. Densities and Excess Molar Volume for the Ternary Systems (1 ...

    African Journals Online (AJOL)

    methylimidazolium methyl sulphate ([BMIM]+[MeSO4]-) were determined. The ternary systems studied were ([BMIM]+[MeSO4]-+ nitromethane + methanol or ethanol or 1-propanol) at the temperatures (303.15 and 313.15) K. The ternary excess molar ...

  13. Single polymer-based ternary electronic memory material and device.

    Science.gov (United States)

    Liu, Shu-Juan; Wang, Peng; Zhao, Qiang; Yang, Hui-Ying; Wong, Jenlt; Sun, Hui-Bin; Dong, Xiao-Chen; Lin, Wen-Peng; Huang, Wei

    2012-06-05

    A ternary polymer memory device based on a single polymer with on-chain Ir(III) complexes is fabricated by combining multiple memory mechanisms into one system. Excellent ternary memory performances-low reading, writing, and erasing voltages and good stability for all three states-are achieved. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. In-Vitro Corrosion Studies of Bioabsorbable Alloys

    Science.gov (United States)

    Gill, P.; Munroe, N.

    Magnesium alloys have inspired a significant amount of attention from researchers all over the world for cardiovascular and orthopedic applications due to their light weight, mechanical integrity and degradation behavior. In this investigation, cast manufactured binary, ternary and quaternary magnesium alloys were studied for their degradation behavior by potentiodynamic polarization tests in phosphate buffer saline solution (PBS) and PBS containing amino acids (cysteine, C and tryptophan, W) at 37 °C. Electrochemical impedance spectroscopy (EIS) tests were performed to determine the charge transfer resistance and immersion tests were performed to assess corrosion rate and hydrogen evolution from the alloys. Furthermore, the surface morphology and surface chemistry of the alloys were observed by scanning electron microscopy (SEM) and X-ray diffraction (XRD).

  15. Polycation-Based Ternary Gene Delivery System.

    Science.gov (United States)

    Liu, Shuai; Guo, Tianying

    2015-01-01

    Recent progress in gene therapy has opened the door for various human diseases. The greatest challenge that gene vectors still face is the ability to sufficiently deliver nucleic acid into target cells. To overcome various barriers, plenty of researches have been undertaken utilizing diverse strategies, among which a wide variety of polycation/pDNA vectors have been developed and explored frequently. For enhanced transfection efficiency, polycations are constantly utilized with covalent modifications, which however lead to reduced positive charge density and changed properties of polycation/pDNA complexes. Accordingly, non-covalent or ternary strategy is proposed. The cationic properties of polycations can be retained and the transfection efficiency can be enhanced by introducing additional polymers with functional groups via non-covalent assembly. This review will discuss the construction and advantages of ternary complexes gene delivery system, including low toxicity and enhanced gene expression both in vitro and in vivo. Recent progress and expectations with promising results that may have some reference for clinical application are also discussed.

  16. Plasmonic spectral tunability of conductive ternary nitrides

    Energy Technology Data Exchange (ETDEWEB)

    Kassavetis, S.; Patsalas, P., E-mail: ppats@physics.auth.gr [Department of Physics, Aristotle University of Thessaloniki, GR-54124 Thessaloniki (Greece); Bellas, D. V.; Lidorikis, E. [Department of Materials Science and Engineering, University of Ioannina, GR-45110 Ioannina (Greece); Abadias, G. [Institut Pprime, Département Physique et Mécanique des Matériaux, Université de Poitiers-CNRS-ENSMA, 86962 Chasseneuil-Futuroscope (France)

    2016-06-27

    Conductive binary transition metal nitrides, such as TiN and ZrN, have emerged as a category of promising alternative plasmonic materials. In this work, we show that ternary transition metal nitrides such as Ti{sub x}Ta{sub 1−x}N, Ti{sub x}Zr{sub 1−x}N, Ti{sub x}Al{sub 1−x}N, and Zr{sub x}Ta{sub 1−x}N share the important plasmonic features with their binary counterparts, while having the additional asset of the exceptional spectral tunability in the entire visible (400–700 nm) and UVA (315–400 nm) spectral ranges depending on their net valence electrons. In particular, we demonstrate that such ternary nitrides can exhibit maximum field enhancement factors comparable with gold in the aforementioned broadband range. We also critically evaluate the structural features that affect the quality factor of the plasmon resonance and we provide rules of thumb for the selection and growth of materials for nitride plasmonics.

  17. Irregular Homogeneity Domains in Ternary Intermetallic Systems

    Directory of Open Access Journals (Sweden)

    Jean-Marc Joubert

    2015-12-01

    Full Text Available Ternary intermetallic A–B–C systems sometimes have unexpected behaviors. The present paper examines situations in which there is a tendency to simultaneously form the compounds ABx, ACx and BCx with the same crystal structure. This causes irregular shapes of the phase homogeneity domains and, from a structural point of view, a complete reversal of site occupancies for the B atom when crossing the homogeneity domain. This work reviews previous studies done in the systems Fe–Nb–Zr, Hf–Mo–Re, Hf–Re–W, Mo–Re–Zr, Re–W–Zr, Cr–Mn–Si, Cr–Mo–Re, and Mo–Ni–Re, and involving the topologically close-packed Laves, χ and σ phases. These systems have been studied using ternary isothermal section determination, DFT calculations, site occupancy measurement using joint X-ray, and neutron diffraction Rietveld refinement. Conclusions are drawn concerning this phenomenon. The paper also reports new experimental or calculated data on Co–Cr–Re and Fe–Nb–Zr systems.

  18. BRAZING ALLOYS

    Science.gov (United States)

    Donnelly, R.G.; Gilliland, R.G.; Slaughter, G.M.

    1962-02-20

    A brazing alloy is described which, in the molten state, is characterized by excellent wettability and flowability and is capable of forming a corrosion-resistant brazed joint. At least one component of said joint is graphite and the other component is a corrosion-resistant refractory metal. The brazing alloy consists essentially of 40 to 90 wt % of gold, 5 to 35 wt% of nickel, and 1 to 45 wt% of tantalum. (AEC)

  19. Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application.

    Science.gov (United States)

    Li, H F; Qiu, K J; Zhou, F Y; Li, L; Zheng, Y F

    2016-11-29

    In the case of medical implants, foreign materials are preferential sites for bacterial adhesion and microbial contamination, which can lead to the development of prosthetic infections. Commercially biomedical TiNi shape memory alloys are the most commonly used materials for permanent implants in contact with bone and dental, and the prevention of infections of TiNi biomedical shape memory alloys in clinical cases is therefore a crucial challenge for orthopaedic and dental surgeons. In the present study, copper has been chosen as the alloying element for design and development novel ternary biomedical Ti‒Ni‒Cu shape memory alloys with antibacterial properties. The effects of copper alloying element on the microstructure, mechanical properties, corrosion behaviors, cytocompatibility and antibacterial properties of biomedical Ti‒Ni‒Cu shape memory alloys have been systematically investigated. The results demonstrated that Ti‒Ni‒Cu alloys have good mechanical properties, and remain the excellent shape memory effects after adding copper alloying element. The corrosion behaviors of Ti‒Ni‒Cu alloys are better than the commercial biomedical Ti‒50.8Ni alloys. The Ti‒Ni‒Cu alloys exhibit excellent antibacterial properties while maintaining the good cytocompatibility, which would further guarantee the potential application of Ti‒Ni‒Cu alloys as future biomedical implants and devices without inducing bacterial infections.

  20. Evaluation of Nb-base alloys for the divertor structure in fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Purdy, I.M. [Argonne National Laboratory, Upton, IL (United States)

    1996-04-01

    Niobium-base alloys are candidate materials for the divertor structure in fusion reactors. For this application, an alloy should resist aqueous corrosion, hydrogen embrittlement, and radiation damage and should have high thermal conductivity and low thermal expansion. Results of corrosion and embrittlement screening tests of several binary and ternary Nb alloys in high-temperature water indicated the Mb-1Zr, Nb-5MO-1Zr, and Nb-5V-1Z4 (wt %) showed sufficient promise for further investigation. These alloys, together with pure Nb and Zircaloy-4 have been exposed to high purity water containing a low concentration of dissolved oxygen (<12 ppb) at 170, 230, and 300{degrees}C for up to {approx}3200 h. Weight-change data, microstructural observations, and qualitative mechanical-property evaluation reveal that Nb-5V-1Zr is the most promising alloy at higher temperatures. Below {approx}200{degrees}C, the alloys exhibit similiar corrosion behavior.

  1. Ultrathin ternary semiconductor TlGaSe2 phototransistors with broad-spectral response

    Science.gov (United States)

    Yang, Shengxue; Wu, Minghui; Wang, Hui; Cai, Hui; Huang, Li; Jiang, Chengbao; Tongay, Sefaattin

    2017-09-01

    Ternary layered III-III-VI2-type metal chalcogenides are a comparatively new group of semiconductors and have attracted strong interest due to their distinct optical and electrical properties in view of potential applications in nonlinear optical, acousto-optical and optoelectronic devices. Here, we report on the fabrication of two-terminal phototransistors based on ultrathin direct-bandgap TlGaSe2 sheets for the first time. Devices exhibit typical p-type conducting behaviors with current on/off ratio of ~102 and gate-tunable transport characteristics. The photocurrent presents stable and reproducible response for various wavelengths of light from ultraviolet (UV) to near-infrared region, confirming the broadband photodetection capability. Photoresponsive behavior of ultrathin TlGaSe2 phototransistors can be modulated by the incident optical power density or wavelength, as well as bias or back-gate voltages. Owing to the presence of direct bandgap, devices possess high photoresponsivity (270 mA W-1) under white light in vacuum, and it is higher than that of single-layer MoS2 phototransistor and graphene photodetectors, accompanying by a fast response time of ~0.2 s. Our studies introduce ternary alloy monochalcogenides phototransistors, and expand the library of ultrathin flexible semiconductors.

  2. Direct observation of interface and nanoscale compositional modulation in ternary III-As heterostructure nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Venkatesan, Sriram; Scheu, Christina [Department of Chemistry and Center for NanoScience, Ludwig-Maximilians-Universität München, Butenandstr 5-13(E), 81377 München (Germany); Madsen, Morten H.; Krogstrup, Peter; Johnson, Erik [Nano-Science Center and Center for Quantum Devices, Niels Bohr Institute, University of Copenhagen, 2100 Copenhagen (Denmark); Schmid, Herbert [INM-Leibniz Institute for New Materials, 66123 Saarbrücken (Germany)

    2013-08-05

    Straight, axial InAs nanowire with multiple segments of Ga{sub x}In{sub 1−x}As was grown. High resolution X-ray energy-dispersive spectroscopy (EDS) mapping reveals the distribution of group III atoms at the axial interfaces and at the sidewalls. Significant Ga enrichment, accompanied by a structural change is observed at the Ga{sub x}In{sub 1−x}As/InAs interfaces and a higher Ga concentration for the early grown Ga{sub x}In{sub 1−x}As segments. The elemental map and EDS line profile infer Ga enrichment at the facet junctions between the sidewalls. The relative chemical potentials of ternary alloys and the thermodynamic driving force for liquid to solid transition explains the growth mechanisms behind the enrichment.

  3. Quantitative Comparison of Ternary Eutectic Phase-Field Simulations with Analytical 3D Jackson-Hunt Approaches

    Science.gov (United States)

    Steinmetz, Philipp; Kellner, Michael; Hötzer, Johannes; Nestler, Britta

    2018-02-01

    For the analytical description of the relationship between undercoolings, lamellar spacings and growth velocities during the directional solidification of ternary eutectics in 2D and 3D, different extensions based on the theory of Jackson and Hunt are reported in the literature. Besides analytical approaches, the phase-field method has been established to study the spatially complex microstructure evolution during the solidification of eutectic alloys. The understanding of the fundamental mechanisms controlling the morphology development in multiphase, multicomponent systems is of high interest. For this purpose, a comparison is made between the analytical extensions and three-dimensional phase-field simulations of directional solidification in an ideal ternary eutectic system. Based on the observed accordance in two-dimensional validation cases, the experimentally reported, inherently three-dimensional chain-like pattern is investigated in extensive simulation studies. The results are quantitatively compared with the analytical results reported in the literature, and with a newly derived approach which uses equal undercoolings. A good accordance of the undercooling-spacing characteristics between simulations and the analytical Jackson-Hunt apporaches are found. The results show that the applied phase-field model, which is based on the Grand potential approach, is able to describe the analytically predicted relationship between the undercooling and the lamellar arrangements during the directional solidification of a ternary eutectic system in 3D.

  4. Kinetic Phase Diagrams of Ternary Al-Cu-Li System during Rapid Solidification: A Phase-Field Study.

    Science.gov (United States)

    Yang, Xiong; Zhang, Lijun; Sobolev, Sergey; Du, Yong

    2018-02-08

    Kinetic phase diagrams in technical alloys at different solidification velocities during rapid solidification are of great importance for guiding the novel alloy preparation, but are usually absent due to extreme difficulty in performing experimental measurements. In this paper, a phase-field model with finite interface dissipation was employed to construct kinetic phase diagrams in the ternary Al-Cu-Li system for the first time. The time-elimination relaxation scheme was utilized. The solute trapping phenomenon during rapid solidification could be nicely described by the phase-field simulation, and the results obtained from the experiment measurement and/or the theoretical model were also well reproduced. Based on the predicted kinetic phase diagrams, it was found that with the increase of interface moving velocity and/or temperature, the gap between the liquidus and solidus gradually reduces, which illustrates the effect of solute trapping and tendency of diffusionless solidification.

  5. Fabrication of biodegradable Zn-Al-Mg alloy: Mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities.

    Science.gov (United States)

    Bakhsheshi-Rad, H R; Hamzah, E; Low, H T; Kasiri-Asgarani, M; Farahany, S; Akbari, E; Cho, M H

    2017-04-01

    In this work, binary Zn-0.5Al and ternary Zn-0.5Al-xMg alloys with various Mg contents were investigated as biodegradable materials for implant applications. Compared with Zn-0.5Al (single phase), Zn-0.5Al-xMg alloys consisted of the α-Zn and Mg 2 (Zn, Al) 11 with a fine lamellar structure. The results also revealed that ternary Zn-Al-Mg alloys presented higher micro-hardness value, tensile strength and corrosion resistance compared to the binary Zn-Al alloy. In addition, the tensile strength and corrosion resistance increased with increasing the Mg content in ternary alloys. The immersion tests also indicated that the corrosion rates in the following order Zn-0.5Al-0.5Mgcorrosion rate, good biocompatibility and antibacterial activities was believed to be a good candidate as a biodegradable implant material. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Compositional trends in Ni-Mn-Ga Heusler alloys: first-principles approach

    Directory of Open Access Journals (Sweden)

    Sokolovskiy Vladimir

    2015-01-01

    Full Text Available In this work we present a systematic investigation of magnetic and structural properties of a broad range of Ni-Mn-Ga alloys by means of the density functional theory. Calculations are carried out for the cubic austenitic phase. The effect of chemical disorder is simulated by using the single-site coherent-potential approximation and the spin-polarized generalized gradient approximation. Equilibrium lattice parameters, bulk moduli, total magnetic moments, and formation energies of a wide range of Heusler alloys have been mapped on compositional ternary diagrams that give a bigger picture of the variety of physical properties of this family of alloys.

  7. Facile Synthesis of Ternary Boron Carbonitride Nanotubes

    Directory of Open Access Journals (Sweden)

    Luo Lijie

    2009-01-01

    Full Text Available Abstract In this study, a novel and facile approach for the synthesis of ternary boron carbonitride (B–C–N nanotubes was reported. Growth occurred by heating simple starting materials of boron powder, zinc oxide powder, and ethanol absolute at 1150 °C under a mixture gas flow of nitrogen and hydrogen. As substrate, commercial stainless steel foil with a typical thickness of 0.05 mm played an additional role of catalyst during the growth of nanotubes. The nanotubes were characterized by SEM, TEM, EDX, and EELS. The results indicate that the synthesized B–C–N nanotubes exhibit a bamboo-like morphology and B, C, and N elements are homogeneously distributed in the nanotubes. A catalyzed vapor–liquid–solid (VLS mechanism was proposed for the growth of the nanotubes.

  8. First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications.

    Science.gov (United States)

    Karre, Rajamallu; Niranjan, Manish K; Dey, Suhash R

    2015-05-01

    High alloyed β-phase stabilized titanium alloys are known to provide comparable Young's modulus as that to the human bones (~30 GPa) but is marred by its high density. In the present study the low titanium alloyed compositions of binary Ti-Nb and ternary Ti-Nb-Zr alloy systems, having stable β-phase with low Young's modulus are identified using first principles density functional framework. The theoretical results suggest that the addition of Nb in Ti and Zr in Ti-Nb increases the stability of the β-phase. The β-phase in binary Ti-Nb alloys is found to be fully stabilized from 22 at.% of Nb onwards. The calculated Young's moduli of binary β-Ti-Nb alloy system are found to be lower than that of pure titanium (116 GPa). For Ti-25(at.%)Nb composition the calculated Young's modulus comes out to be ~80 GPa. In ternary Ti-Nb-Zr alloy system, the Young's modulus of Ti-25(at.%)Nb-6.25(at.%)Zr composition is calculated to be ~50 GPa. Furthermore, the directional Young's moduli of these two selected binary (Ti-25(at.%)Nb) and ternary alloy (Ti-25(at.%)Nb-6.25(at.%)Zr) compositions are found to be nearly isotropic in all crystallographic directions. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Electrical Resistance Alloys and Low-Expansion Alloys

    DEFF Research Database (Denmark)

    Kjer, Torben

    1996-01-01

    The article gives an overview of electrical resistance alloys and alloys with low thermal expansion. The electrical resistance alloys comprise resistance alloys, heating alloys and thermostat alloys. The low expansion alloys comprise alloys with very low expansion coefficients, alloys with very low...

  10. Theoretical Studies of Hydrogen Storage Alloys.

    Energy Technology Data Exchange (ETDEWEB)

    Jonsson, Hannes

    2012-03-22

    Theoretical calculations were carried out to search for lightweight alloys that can be used to reversibly store hydrogen in mobile applications, such as automobiles. Our primary focus was on magnesium based alloys. While MgH{sub 2} is in many respects a promising hydrogen storage material, there are two serious problems which need to be solved in order to make it useful: (i) the binding energy of the hydrogen atoms in the hydride is too large, causing the release temperature to be too high, and (ii) the diffusion of hydrogen through the hydride is so slow that loading of hydrogen into the metal takes much too long. In the first year of the project, we found that the addition of ca. 15% of aluminum decreases the binding energy to the hydrogen to the target value of 0.25 eV which corresponds to release of 1 bar hydrogen gas at 100 degrees C. Also, the addition of ca. 15% of transition metal atoms, such as Ti or V, reduces the formation energy of interstitial H-atoms making the diffusion of H-atoms through the hydride more than ten orders of magnitude faster at room temperature. In the second year of the project, several calculations of alloys of magnesium with various other transition metals were carried out and systematic trends in stability, hydrogen binding energy and diffusivity established. Some calculations of ternary alloys and their hydrides were also carried out, for example of Mg{sub 6}AlTiH{sub 16}. It was found that the binding energy reduction due to the addition of aluminum and increased diffusivity due to the addition of a transition metal are both effective at the same time. This material would in principle work well for hydrogen storage but it is, unfortunately, unstable with respect to phase separation. A search was made for a ternary alloy of this type where both the alloy and the corresponding hydride are stable. Promising results were obtained by including Zn in the alloy.

  11. Microstructure, a limiting parameter for determining the engineering range of compositions for light alloys: The Al-Cu-Si system

    Energy Technology Data Exchange (ETDEWEB)

    Plaza, D.; Pero-Sanz, J.A. [Univ. Politecnica, Madrid (Spain); Asensio, J.; Verdeja, J.I. [Univ. de Oviedo (Spain)

    1998-03-01

    Twelve as-cast alloys of the Al-Cu-Si ternary system were investigated. In all the cases, the microstructural phases observed were: {alpha} solid solution of Cu and Si in Al, CuAl{sub 2} ({theta} phase), and silicon crystals. The morphology and distribution of the {theta} and Si brittle constituents limit the percentages of Cu and Si added in the composition ranges of these commercial alloys.

  12. Cyclic degradation of titanium-tantalum high-temperature shape memory alloys - The role of dislocation activity and chemical decomposition

    OpenAIRE

    Niendorf, T.; Krooß, P.; Somsen, C.; Rynko, R.; Paulsen, A.; Batyrshina, E.; Frenzel, J.; G. Eggeler; Maier, Hans Jürgen

    2015-01-01

    Titanium-tantalum shape memory alloys (SMAs) are promising candidates for actuator applications at elevated temperatures. They may even succeed in substituting ternary nickel-titanium high temperature SMAs, which are either extremely expensive or difficult to form. However, titanium-tantalum alloys show rapid functional and structural degradation under cyclic thermo-mechanical loading. The current work reveals that degradation is not only governed by the evolution of the ω-phase. Dislocation ...

  13. Understanding the vapor-liquid-solid growth and composition of ternary III-V nanowires and nanowire heterostructures

    Science.gov (United States)

    Dubrovskii, V. G.

    2017-11-01

    Based on the recent achievements in vapor-liquid-solid (VLS) synthesis, characterization and modeling of ternary III-V nanowires and axial heterostructures within such nanowires, we try to understand the major trends in their compositional evolution from a general theoretical perspective. Clearly, the VLS growth of ternary materials is much more complex than in standard vapor-solid epitaxy techniques, and even maintaining the necessary control over the composition of steady-state ternary nanowires is far from straightforward. On the other hand, VLS nanowires offer otherwise unattainable material combinations without introducing structural defects and hence are very promising for next-generation optoelectronic devices, in particular those integrated with a silicon electronic platform. In this review, we consider two main problems. First, we show how and by means of which parameters the steady-state composition of Au-catalyzed or self-catalyzed ternary III-V nanowires can be tuned to a desired value and why it is generally different from the vapor composition. Second, we present some experimental data and modeling results for the interfacial abruptness across axial nanowire heterostructures, both in Au-catalyzed and self-catalyzed VLS growth methods. Refined modeling allows us to formulate some general growth recipes for suppressing the unwanted reservoir effect in the droplet and sharpening the nanowire heterojunctions. We consider and refine two approaches developed to date, namely the regular crystallization model for a liquid alloy with a critical size of only one III-V pair at high supersaturations or classical binary nucleation theory with a macroscopic critical nucleus at modest supersaturations.

  14. Corrosion behavior of palladium-silver-copper alloys in model saliva.

    Science.gov (United States)

    Joska, Ludek; Poddana, Marcela; Leitner, Jindrich

    2008-08-01

    Palladium-silver system alloyed with other metals represents one of possible material choices in prosthetics. Its corrosion properties are influenced by minority components added in order to obtain the properties required for stomatological purposes. The objective of this work was to ascertain the influence of copper on the corrosion mechanism of palladium-silver alloys. Corrosion properties of four palladium-silver-copper alloys were compared with the behavior of the palladium-silver binary system. Standard electrochemical measurements in a model saliva solution were complemented with an XPS analysis of the specimens surface. Experimental data were compared with the results of thermodynamic analysis. The foregoing study revealed formation of a saline layer of insoluble silver compounds as the dominant feature of the corrosion mechanism in a binary system. This process is suppressed in ternary alloys where electrochemical reactions of copper take place on the alloy-electrolyte phase boundary leading to the formation of a layer based on copper oxides. The alloying of the palladium-silver binary system with copper results in an important change in the corrosion behavior of ternary alloys. A change in the mechanism of interaction with the environment leads to susceptibility to non-uniform corrosion.

  15. Formation and thermal stability of amorphous Ti-Si-C alloys

    Energy Technology Data Exchange (ETDEWEB)

    Naka, M. [Joining and Welding Research Inst., Osaka (Japan); Sakai, H. [Osaka University, Osaka 565 (Japan); Maeda, M. [Joining and Welding Research Inst., Osaka (Japan); Mori, H. [Research Center for Ultra-High Voltage Electronmicroscopy, Osaka University, Osaka 565 (Japan)

    1997-06-15

    The crystallization behavior of Ti-Si-C ternary amorphous alloys sputtered in low-pressure argon was investigated by measuring differential scanning calorimetry (DSC) curves. The crystallized microstructures of Ti-Si-C amorphous alloys were observed by in-situ heating in a hot stage of an electron microscope. Ti-46at.%Si-32at.%C amorphous alloy crystallizes to fine grains composed of {beta}-SiC and TiSi{sub 2}. Ti-14at.%Si-20at.%C amorphous alloy crystallizes to fine grains composed of TiC and Ti{sub 5}Si{sub 3}. Although the carbon improves the thermal stability of the Ti-Si-C ternary alloys, the silicon degrades the thermal stability of the alloys. The amorphous alloys containing compositions corresponding to carbosilicide or carbide such as Ti{sub 5}Si{sub 3}C{sub x}, Ti{sub 3}SiC{sub 2} or SiC possess high thermal stability and high hardness values. (orig.)

  16. Characterization of microstructural, mechanical and thermophysical properties of Th-52U alloy

    Energy Technology Data Exchange (ETDEWEB)

    Das, Santanu, E-mail: reachoutsantanu@gmail.com [Integrated Fuel Fabrication Facility, Bhabha Atomic Research Centre, Mumbai (India); Kaity, S. [Radiometallurgy Division, Bhabha Atomic Research Centre, Mumbai (India); Kumar, R. [Uranium Extraction Division, Bhabha Atomic Research Centre, Mumbai (India); Banerjee, J. [Radiometallurgy Division, Bhabha Atomic Research Centre, Mumbai (India); Roy, S.B. [Chemical Engineering Group, Bhabha Atomic Research Centre, Mumbai (India); Chaudhari, G.P.; Daniel, B.S.S. [Indian Institute of Technology Roorkee, Roorkee (India)

    2016-11-15

    Th-52 wt.% U alloy has a microstructure featuring interspersed networks of uranium rich and thorium rich phases. Room temperature hardness of the alloy is more than twice that of unalloyed thorium. The alloy age hardens (550 °C) only slightly (peak hardness/hardness of solution heated and quenched = 1.05). Room temperature thermal conductivity (25.6 W m{sup −1} {sup °}C{sup −1}) is close to that of uranium and most of the binary and ternary metallic alloy fuel materials. Average linear coefficient of thermal expansion (CTE) of Th-52 wt.% U alloy [11.2 × 10{sup −06} °C{sup −1} (27–290 °C) and 16.75 × 10{sup −06} °C{sup −1} (27–600 °C)] are comparable with that of many metallic alloy fuel candidates. Th-52 wt.% U alloy with non-age hardenable microstructure, appreciable thermal conductivity, moderate thermal expansion may find metallic fuel applications in nuclear reactors. - Highlights: • Th-52U alloy consists of continuous, interspersed network of Th-rich and U-rich phases. • This monotectic alloy composition shows negligible age hardening but fast kinetics. • Average linear CTE (27–600 {sup °}C) (16.7 × 10{sup −6} °C{sup -1}) of Th-52U alloy is comparable with that of other metallic fuels. • λ{sub RT} (25.6 W m{sup −1} °C{sup −1}) is comparable with that of most of the binary and ternary alloy fuels.

  17. Positron annihilation lifetime study of interfaces in ternary polymer blends

    Science.gov (United States)

    Meghala, D.; Ramya, P.; Pasang, T.; Raj, J. M.; Ranganathaiah, C.; Williams, J. F.

    2013-06-01

    A new method based on positron lifetime spectroscopy is developed to characterize individual interfaces in ternary polymer blends and hence determine the composition dependent miscibility level. The method owes its origin to the Kirkwood-Risemann-Zimm (KRZ) model for the evaluation of the hydrodynamic interaction parameters (αij) which was used successfully for a binary blend with a single interface. The model was revised for the present work for ternary polymer blends to account for three interfaces. The efficacy of this method is shown for two ternary blends namely poly(styrene-co-acrylonitrile)/poly (ethylene-co-vinylacetate)/poly(vinyl chloride) (SAN/EVA/PVC) and polycaprolactone /poly(styrene-co-acrylonitrile)/poly(vinyl chloride) (PCL/SAN/PVC) at different compositions. An effective hydrodynamic interaction parameter, αeff, was introduced to predict the overall miscibility of ternary blends.

  18. Orthodontic silver brazing alloys.

    Science.gov (United States)

    Brockhurst, P J; Pham, H L

    1989-10-01

    Orthodontic silver brazing alloys suffer from the presence of cadmium, excessive flow temperatures, and crevice corrosion on stainless steel. Seven alloys were examined. Two alloys contained cadmium. The lowest flow temperature observed was 629 degrees C for a cadmium alloy and 651 degrees C for two cadmium free alloys. Three alloys had corrosion resistance superior to the other solders. Addition of low melting temperature elements gallium and indium reduced flow temperature in some cases but produced brittleness in the brazing alloy.

  19. Subarrayed Antenna Array Synthesis Using Ternary Adjusting Method

    Directory of Open Access Journals (Sweden)

    Guolong He

    2014-01-01

    Full Text Available Ternary adjusting method is proposed and combined with particle swarm optimization (PSO algorithm for subarrayed antenna array synthesis. Ternary variables are introduced to represent element adjustments between adjacent subarrays. Compared to previous methods, rounding-off operations are not required any longer, and the equation constraint of the fixed total element number is also removed, which effectively reduces the complexity of implementation while obtaining improved topology exploration capability simultaneously.

  20. On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Science.gov (United States)

    Presoly, P.; Bernhard, C.

    2016-07-01

    Reliable thermodynamic data are essential for the design and the production of new alloying systems. Particularly, the knowledge of the high-temperature phase transformations (TLiquid, TSolid, TPerit, Tγ→δ) are important for the solidification and the further processing. Investigations of selected commercial Dual-Phase, TRIP and high-Mn TWIP steels by DTA/DSC measurements show that the experimental results differ significantly from the calculation results of thermodynamic databases with respect to the phase transformation temperature and sequence. Based on these findings, it is very important to identify the defective subsystems of complex alloys in order to optimise the thermodynamic databases. In order to verify a quaternary system, e.g. the Fe-C-Si-Mn system, it is important to check the corresponding ternary subsystems. This was performed by DSC measurements of selected model alloys. By doing so, it was found that in Si- and Mn-alloyed Dual-Phase steels the thermodynamic description of the Fe-Si-Mn system is currently inadequate. This is a very important result, since all new designed steel grades for the automotive industry are based on a Fe-C-Si-Mn matrix.

  1. Charge distribution in the ternary fragmentation of {sup 252}Cf

    Energy Technology Data Exchange (ETDEWEB)

    Senthil Kannan, M.T.; Balasubramaniam, M. [Bharathiar University, Department of Physics, Coimbatore (India)

    2017-08-15

    We present here, for the first time, a study on ternary fragmentation charge distribution of {sup 252}Cf using the convolution integral method and the statistical theory. The charge distribution for all possible charge combinations of a ternary breakup are grouped as a bin containing different mass partitions. Different bins corresponding to various third fragments with mass numbers from A{sub 3} = 16 to 84 are identified with the available experimental masses. The corresponding potential energy surfaces are calculated using the three cluster model for the two arrangements A{sub 1} + A{sub 2} + A{sub 3} and A{sub 1} + A{sub 3} + A{sub 2}. The ternary fragmentation yield values are calculated for the ternary combination from each bin possessing minimum potential energy. The yields of the resulting ternary combinations as a function of the charge numbers of the three fragments are analyzed for both the arrangements. The calculations are carried out at different excitation energies of the parent nucleus. For each excitation energy the temperature of the three fragments are iteratively computed conserving the total energy. The distribution of fragment temperatures corresponding to different excitation energies for some fixed third fragments are discussed. The presence of the closed shell nucleus Sn in the favourable ternary fragmentation is highlighted. (orig.)

  2. Impact of ternary blends of biodiesel on diesel engine performance

    Directory of Open Access Journals (Sweden)

    Prem Kumar

    2016-06-01

    Full Text Available The Pongamia and waste cooking oils are the main non edible oils for biodiesel production in India. The aim of the present work is to evaluate the fuel properties and investigate the impact on engine performance using Pongamia and waste cooking biodiesel and their ternary blend with diesel. The investigation of the fuel properties shows that Pongamia biodiesel and waste cooking biodiesel have poor cold flow property. This will lead to starting problem in the engine operation. To overcome this problem the ternary blends of diesel, waste cooking biodiesel and Pongamia biodiesel are prepared. The cloud and pour point for ternary blend, (WCB20:PB20:D60 were found to be 7 °C and 6.5 °C which are comparable to cloud and pour point of diesel 6 °C and 5 °C, respectively. The result of the test showed that brake specific fuel consumption for Pongamia biodiesel and waste cooking biodiesel is higher than ternary blend, (WCB20:PB20:D60 due to their lower energy content. The brake thermal efficiency of ternary blend and diesel is comparable while the Pongamia and waste cooking biodiesel have low efficiency. The result of investigation showed that ternary blend can be developed as alternate fuel.

  3. Magnesium and related low alloys

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, J.; Caillat, R.; Darras, R. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    In the first part the authors examine the comparative corrosion of commercial magnesium, of a magnesium-zirconium alloy (0,4 per cent {<=} Zr {<=} 0,7 per cent) of a ternary magnesium-zinc-zirconium alloy (0,8 per cent {<=} Zn {<=} 1,2 per cent) and of english 'Magnox type' alloys, in dry carbon dioxide-free air, in damp carbon dioxide-free air, and in dry and damp carbon dioxide, at temperatures from 300 to 600 deg. C. In the second part the structural stability of these materials is studied after annealings, of 10 to 1000 hours at 300 to 450 deg. C. Variations in grain after these heat treatments and mechanical stretching properties at room temperature are presented. Finally various creep rate and life time diagrams are given for these materials, for temperatures ranging from 300 to 450 deg. C. (author) [French] Dans une premiere partie les auteurs etudient la corrosion comparee du magnesium commercial, d'un alliage magnesium-zirconium (0,4 pour cent {<=} Zr {<=} 0,7 pour cent), d'un alliage ternaire magnesium-zinc-zirconium (0,8 pour cent {<=} Zn {<=} 1,2 pour cent), et d'alliages anglais 'type Magnox', dans l'air sec decarbonate, l'air humide decarbonate, le gaz carbonique sec et humide a des temperatures de 300 a 600 deg. C. Dans une seconde partie, est etudiee la stabilite structurale de ces materiaux apres des recuits de 300 a 450 deg. C, et de 10 a 1000 heures. Sont presentees les variations, apres ces traitements thermiques, de la grosseur du grain, et des caracteristiques mecaniques de traction a la temperature ambiante. Enfin, quelques diagrammes de vitesse de fluage et de durees de vie sont presentes sur ces materiaux pour des temperatures variant entre 300 et 450 deg. C. (auteur)

  4. Maxwell-Stefan diffusion coefficient estimation for ternary systems: an ideal ternary alcohol system.

    Science.gov (United States)

    Allie-Ebrahim, Tariq; Zhu, Qingyu; Bräuer, Pierre; Moggridge, Geoff D; D'Agostino, Carmine

    2017-06-21

    The Maxwell-Stefan model is a popular diffusion model originally developed to model diffusion of gases, which can be considered thermodynamically ideal mixtures, although its application has been extended to model diffusion in non-ideal liquid mixtures as well. A drawback of the model is that it requires the Maxwell-Stefan diffusion coefficients, which are not based on measurable quantities but they have to be estimated. As a result, numerous estimation methods, such as the Darken model, have been proposed to estimate these diffusion coefficients. However, the Darken model was derived, and is only well defined, for binary systems. This model has been extended to ternary systems according to two proposed forms, one by R. Krishna and J. M. van Baten, Ind. Eng. Chem. Res., 2005, 44, 6939-6947 and the other by X. Liu, T. J. H. Vlugt and A. Bardow, Ind. Eng. Chem. Res., 2011, 50, 10350-10358. In this paper, the two forms have been analysed against the ideal ternary system of methanol/butan-1-ol/propan-1-ol and using experimental values of self-diffusion coefficients. In particular, using pulsed gradient stimulated echo nuclear magnetic resonance (PGSTE-NMR) we have measured the self-diffusion coefficients in various methanol/butan-1-ol/propan-1-ol mixtures. The experimental values of self-diffusion coefficients were then used as the input data required for the Darken model. The predictions of the two proposed multicomponent forms of this model were then compared to experimental values of mutual diffusion coefficients for the ideal alcohol ternary system. This experimental-based approach showed that the Liu's model gives better predictions compared to that of Krishna and van Baten, although it was only accurate to within 26%. Nonetheless, the multicomponent Darken model in conjunction with self-diffusion measurements from PGSTE-NMR represents an attractive method for a rapid estimation of mutual diffusion in multicomponent systems, especially when compared to exhaustive

  5. Evolution of Ternary AuAgPd Nanoparticles by the Control of Temperature, Thickness, and Tri-Layer

    Directory of Open Access Journals (Sweden)

    Sundar Kunwar

    2017-11-01

    Full Text Available Metallic alloy nanoparticles (NPs possess great potential to enhance the optical, electronic, chemical, and magnetic properties for various applications by the control of morphology and elemental composition. This work presents the fabrication of ternary AuAgPd alloy nanostructures on sapphire (0001 via the solid-state dewetting of sputter-deposited tri-metallic layers. Based on the systematic control of temperature, thickness, and deposition order of tri-layers, the composite AuAgPd alloy nanoparticles (NPs with various shape, size, and density are demonstrated. The metallic tri-layers exhibit various stages of dewetting based on the increasing growth temperatures between 400 and 900 °C at 15 nm tri-layer film thickness. Specifically, the nucleation of tiny voids and hillocks, void coalescence, the growth and isolated nanoparticle formation, and the shape transformation with Ag sublimation are observed. With the reduced film thickness (6 nm, tiny alloy NPs with improved structural uniformity and spatial arrangement are obtained due to enhanced dewetting. The growth trend of alloy NPs is drastically altered by changing the deposition order of metallic tri-layers. The overall evolution is governed by the surface diffusion and inter-mixing of metallic atoms, Rayleigh-like instability, surface and interface energy minimization, and equilibrium state of the system. The UV-VIS-NIR reflectance spectra reveal the formation of an absorption band and reflectance maxima at specific wavelengths based on the morphology and composition of AuAgPd alloy NPs. In addition, Raman spectra analysis shows the modulation of intensity and peak position of natural vibration modes of sapphire (0001.

  6. Effect of composition on the structure and properties of Ti-Co-Cr alloys

    Directory of Open Access Journals (Sweden)

    T. Matković

    2010-01-01

    Full Text Available The present work is a study of six as-cast Ti-Co-Cr alloys in the Ti-rich region with the purpose of examining the possibility of obtaining a new β-type Ti-alloys. Two experimental alloys Ti80Co10Cr10 and Ti70Co10Cr20 are nearly single-phases and are identified as bcc β-Ti phase. They also display the lowest hardness values and the best corrosion properties. The present study indicates that the region of biomedically-acceptable ternary Ti-rich alloys is situated within lower concentrations of alloying elements, i.e. about 10 at.% Co and 20 at. % Cr.

  7. Surface modification of Ni–Ti alloys for stent application after magnetoelectropolishing

    Energy Technology Data Exchange (ETDEWEB)

    Gill, Puneet; Musaramthota, Vishal; Munroe, Norman [Department of Mechanical and Materials Engineering, Florida International University, Miami, FL 33174 (United States); Datye, Amit [Department of Materials Science and Engineering, The University of Tennessee, Knoxville, TN 37916 (United States); Dua, Rupak [Department of Biomedical Engineering, Florida International University, Miami, FL 33174 (United States); Haider, Waseem [Mechanical Engineering, University of Texas-Pan American, TX (United States); McGoron, Anthony [Department of Biomedical Engineering, Florida International University, Miami, FL 33174 (United States); Rokicki, Ryszard [Electrobright, Macungie, PA 18062 (United States)

    2015-05-01

    The constant demand for new implant materials and the multidisciplinary design approaches for stent applications have expanded vastly over the past decade. The biocompatibility of these implant materials is a function of their surface characteristics such as morphology, surface chemistry, roughness, surface charge and wettability. These surface characteristics can directly influence the material's corrosion resistance and biological processes such as endothelialization. Surface morphology affects the thermodynamic stability of passivating oxides, which renders corrosion resistance to passivating alloys. Magnetoelectropolishing (MEP) is known to alter the morphology and composition of surface films, which assist in improving corrosion resistance of Nitinol alloys. This work aims at analyzing the surface characteristics of MEP Nitinol alloys by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The wettability of the alloys was determined by contact angle measurements and the mechanical properties were assessed by Nanoindentation. Improved mechanical properties were observed with the addition of alloying elements. Cyclic potentiodynamic polarization tests were performed to determine the corrosion susceptibility. Further, the alloys were tested for their cytotoxicity and cellular growth with endothelial cells. Improved corrosion resistance and cellular viability were observed with MEP surface treated alloys. - Highlights: • Magnetoelectropolishing (MEP) reduces the surface asperities of Nitinol alloys and formed stable oxides on the surface. • Improved corrosion resistance and reduced Nickel ion leaching were observed for MEP surfaces. • Ni–Ti alloyed with Cr showed improved mechanical properties. • Enhanced endothelial cell proliferation on ternary Nitinol alloys.

  8. Two-layer synchronized ternary quantum-dot cellular automata wire crossings

    Science.gov (United States)

    2012-01-01

    Quantum-dot cellular automata are an interesting nanoscale computing paradigm. The introduction of the ternary quantum-dot cell enabled ternary computing, and with the recent development of a ternary functionally complete set of elementary logic primitives and the ternary memorizing cell design of complex processing structures is becoming feasible. The specific nature of the ternary quantum-dot cell makes wire crossings one of the most problematic areas of ternary quantum-dot cellular automata circuit design. We hereby present a two-layer wire crossing that uses a specific clocking scheme, which ensures the crossed wires have the same effective delay. PMID:22507371

  9. Contrasting performance of donor-acceptor copolymer pairs in ternary blend solar cells and two-acceptor copolymers in binary blend solar cells.

    Science.gov (United States)

    Khlyabich, Petr P; Rudenko, Andrey E; Burkhart, Beate; Thompson, Barry C

    2015-02-04

    Here two contrasting approaches to polymer-fullerene solar cells are compared. In the first approach, two distinct semi-random donor-acceptor copolymers are blended with phenyl-C61-butyric acid methyl ester (PC61BM) to form ternary blend solar cells. The two poly(3-hexylthiophene)-based polymers contain either the acceptor thienopyrroledione (TPD) or diketopyrrolopyrrole (DPP). In the second approach, semi-random donor-acceptor copolymers containing both TPD and DPP acceptors in the same polymer backbone, termed two-acceptor polymers, are blended with PC61BM to give binary blend solar cells. The two approaches result in bulk heterojunction solar cells that have the same molecular active-layer components but differ in the manner in which these molecular components are mixed, either by physical mixing (ternary blend) or chemical "mixing" in the two-acceptor (binary blend) case. Optical properties and photon-to-electron conversion efficiencies of the binary and ternary blends were found to have similar features and were described as a linear combination of the individual components. At the same time, significant differences were observed in the open-circuit voltage (Voc) behaviors of binary and ternary blend solar cells. While in case of two-acceptor polymers, the Voc was found to be in the range of 0.495-0.552 V, ternary blend solar cells showed behavior inherent to organic alloy formation, displaying an intermediate, composition-dependent and tunable Voc in the range from 0.582 to 0.684 V, significantly exceeding the values achieved in the two-acceptor containing binary blend solar cells. Despite the differences between the physical and chemical mixing approaches, both pathways provided solar cells with similar power conversion efficiencies, highlighting the advantages of both pathways toward highly efficient organic solar cells.

  10. Nanoporous PtFe alloys as highly active and durable electrocatalysts for oxygen reduction reaction

    Science.gov (United States)

    Duan, Huimei; Hao, Qin; Xu, Caixia

    2014-12-01

    Nanoporous PtFe alloys with two different bimetallic ratios are fabricated by selectively dealloying PtFeAl ternary alloys, characterized by nanoscaled bicontinuous network skeleton with interconnected hollow channels extending in all three dimensions. The reactive components in PtFeAl ternary alloy were sequentially leached out in a highly controllable manner, generating nanoporous architecture with different bimetallic ratios and the typical ligament size as small as 5 nm. These nanoporous PtFe alloys exhibit much enhanced electrocatalytic activity for oxygen reduction reaction compared with the PtFe/C and Pt/C catalysts. The specific and mass activities for oxygen reduction follow the order of nanoporous Pt75Fe25 > nanoporous Pt55Fe45 > PtFe/C > Pt/C. In the absence of any catalyst support, the structure stability of nanoporous PtFe alloys is greatly enhanced with less loss of the electrochemical surface area and the oxygen reduction activity upon long-term potential scan tests compared with PtFe/C and Pt/C catalysts. The as-made nanoporous PtFe alloys thus hold great application potential as promising cathode electrocatalyst in proton exchange membrane fuel cells with the advantages of easy preparation along with superior oxygen reduction activity and durability.

  11. The Effect of Cu and Cr on Clustering and Precipitation in Al-Mg-Si Alloys

    Science.gov (United States)

    Liang, Zeqin; Chang, Cynthia Sin Ting; Banhart, John; Hirsch, Jürgen

    A group of alloys based on pure ternary Al-0.4 wt.%Mg-1.0 wt.%Si are used to study the effect of Cu and Cr on clustering and precipitation in Al-Mg-Si alloys. Differential Scanning Calorimetry (DSC) is performed for samples naturally aged for different times after solution heat treatment and ice water quenching. Three clustering processes are observed in all the alloys. The fundamental clustering sequence does not change by additional elements. However, the Cu containing alloy shows less clustering and the first clustering event is hindered. Kissinger analysis reveals that the 2nd and 3rd processes have very similar effective activation energies. Therefore, a model incorporating only two independent reactions is used to obtain kinetic parameters. It is found that the first clustering process starts with a low effective activation energy of 50 kJ/mol and has a mechanism similar to mixed nucleation while the latter two processes are governed by a higher activation energy of 79 kJ/mol and have a mechanism similar to particle growth. During precipitation, the Cr containing alloy shows a similar precipitation heat signal in DSC as the pure ternary, thus having negligible effect on precipitation. On the other hand, the formation of β″ is less dominant in the Cu-containing alloy while precipitation of other phases before reaching the peak-aged condition is possible.

  12. Phase Equilibria in the Fe-Mo-Ti Ternary System at 1173 K (900 °C) and 1023 K (750 °C)

    Science.gov (United States)

    Knowles, A. J.; Jones, N. G.; Jones, C. N.; Stone, H. J.

    2017-09-01

    Alloys with fine-scale eutectic microstructures comprising Ti-based A2 and TiFe B2 phases have been shown to have excellent mechanical properties. In this study, the potential of alloys with further refined A2-B2 microstructures formed through solid-state precipitation has been explored by analyzing a series of six alloys within the Fe-Mo-Ti ternary system. Partial isothermal sections of this system at 1173 K (900 °C) and 1023 K (750 °C) were constructed, from which the ternary solubility limits of the A2 (Ti, Mo), B2 TiFe, D85 Fe7Mo6, and C14 Fe2Ti phases were determined. With these data, the change in solubility of Fe in the A2 phase with temperature, which provides the driving force for precipitation of B2 TiFe, was determined and used to predict the maximum potential volume fraction of B2 TiFe precipitates that may be formed in an A2 (Ti, Mo) matrix.

  13. New Theoretical Technique Developed for Predicting the Stability of Alloys

    Science.gov (United States)

    1996-01-01

    When alloys are being designed for aeronautical and other applications, a substantial experimental effort is necessary to make incremental changes in the desired alloy properties. A scheme to narrow the field to the most promising candidates would substantially reduce the high cost of this experimental screening. Such a method for determining alloy properties, called the BFS (Bozzolo, Ferrante, and Smith) method, has been developed at the NASA Lewis Research Center. This method was used to calculate the thermal stability and mechanical strength of 200 alloys of Ni3Al, with Cu and Au impurities forming ternary and quaternary compounds. With recent advances in the method, almost any metallic impurity and crystal structure can be addressed. In addition, thermal effects can be addressed with Monte Carlo techniques. At present, an experimental program is in progress to verify these results. The method identified a small number of the most promising candidates from the 200 alloys with the largest negative heat of formation and the highest bulk modulus. This calculation required only 5 min of CPU time on a VAX computer. It is clear that semi-empirical methods have achieved the level of development and reliability to warrant examining this new approach to the problem of alloy design. The present work was meant to demonstrate, perhaps in a rather simple way, this power. This type of application of atomistic simulation methods can narrow the gap and improve the feedback between theoretical predictions and laboratory experimentation.

  14. Liquid-liquid equilibria for ternary polymer mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Suk Yung [Division of Chemical Engineering and Molecular Thermodynamics Laboratory, Hanyang University, Seoul 133-791 (Korea, Republic of); Bae, Young Chan, E-mail: ycbae@hanyang.ac.kr [Division of Chemical Engineering and Molecular Thermodynamics Laboratory, Hanyang University, Seoul 133-791 (Korea, Republic of)

    2011-01-24

    Graphical abstract: We developed a molecular thermodynamic model for multicomponent systems and discribed the phase equilibrium for ternary polymer mixtures by using the model parameters obtained from the binary systems. Research highlights: {yields} Model parameters were obtained from the binary systems. {yields} The obtained parameters were directly used to predict the ternary data. {yields} The undetermined parameters were used to correlate the ternary data. {yields} The proposed model agreed well with the experimental data. - Abstract: A molecular thermodynamic model for multicomponent systems based on a closed-packed lattice model is presented based on two contributions; entropy and energy contribution. The calculated liquid-liquid equilibria of ternary chainlike mixtures agreed with Monte Carlo simulation results. The proposed model can satisfactorily predict Types 0, 1, 2 and 3 phase separations of the Treybal classification. The model parameters obtained from the binary systems were used to directly predict real ternary systems and the calculated results correlated well with experimental data using few adjustable parameters. Specific interactions in associated binary systems were considered using a secondary lattice.

  15. Effects of Palladium Content, Quaternary Alloying, and Thermomechanical Processing on the Behavior of Ni-Ti-Pd Shape Memory Alloys for Actuator Applications

    Science.gov (United States)

    Bigelow, Glen

    2008-01-01

    The need for compact, solid-state actuation systems for use in the aerospace, automotive, and other transportation industries is currently driving research in high-temperature shape memory alloys (HTSMA) having transformation temperatures above 100 C. One of the basic high temperature systems under investigation to fill this need is NiTiPd. Prior work on this alloy system has focused on phase transformations and respective temperatures, no-load shape memory behavior (strain recovery), and tensile behavior for selected alloys. In addition, a few tests have been done to determine the effect of boron additions and thermomechanical treatment on the aforementioned properties. The main properties that affect the performance of a solid state actuator, namely work output, transformation strain, and permanent deformation during thermal cycling under load have mainly been neglected. There is also no consistent data representing the mechanical behavior of this alloy system over a broad range of compositions. For this thesis, ternary NiTiPd alloys containing 15 to 46 at.% palladium were processed and the transformation temperatures, basic tensile properties, and work characteristics determined. However, testing reveals that at higher levels of alloying addition, the benefit of increased transformation temperature begins to be offset by lowered work output and permanent deformation or "walking" of the alloy during thermal cycling under load. In response to this dilemma, NiTiPd alloys have been further alloyed with gold, platinum, and hafnium additions to solid solution strengthen the martensite and parent austenite phases in order to improve the thermomechanical behavior of these materials. The tensile properties, work behavior, and dimensional stability during repeated thermal cycling under load for the ternary and quaternary alloys were compared and discussed. In addition, the benefits of more advanced thermomechanical processing or training on the dimensional stability of

  16. Monte Carlo Simulation of Alloy Design Techniques: Fracture and Welding Studied Using the BFS Method for Alloys

    Science.gov (United States)

    Bozzolo, Guillermo H.; Good, Brian; Noebe, Ronald D.; Honecy, Frank; Abel, Phillip

    1999-01-01

    Large-scale simulations of dynamic processes at the atomic level have developed into one of the main areas of work in computational materials science. Until recently, severe computational restrictions, as well as the lack of accurate methods for calculating the energetics, resulted in slower growth in the area than that required by current alloy design programs. The Computational Materials Group at the NASA Lewis Research Center is devoted to the development of powerful, accurate, economical tools to aid in alloy design. These include the BFS (Bozzolo, Ferrante, and Smith) method for alloys (ref. 1) and the development of dedicated software for large-scale simulations based on Monte Carlo- Metropolis numerical techniques, as well as state-of-the-art visualization methods. Our previous effort linking theoretical and computational modeling resulted in the successful prediction of the microstructure of a five-element intermetallic alloy, in excellent agreement with experimental results (refs. 2 and 3). This effort also produced a complete description of the role of alloying additions in intermetallic binary, ternary, and higher order alloys (ref. 4).

  17. Microstructural characterization of Mg–Al–Sr alloys

    Directory of Open Access Journals (Sweden)

    M. Aljarrah et al

    2007-01-01

    Full Text Available The microstructural details of fourteen Mg–Al–Sr alloys were investigated in the as-cast form by a combination of scanning electron microscopy/energy dispersive spectrometer (SEM/EDS analysis and quantitative electron probe microanalysis (EPMA. The heat transfer method coupled with the DSC measurement has been utilized to determine the solidification curves of the alloys. The morphology and the chemical composition of the phases were characterized. The microstructure of the alloys is primarily dominated by (Mg and (Al4Sr. In the present investigation, ternary solid solubility of three binary compounds extended into the ternary system has been reported and denoted as: (Al4Sr, (Mg17Sr2 and (Mg38Sr9. The (Al4Sr phase is a substitutional solid solution represented by MgxAl4−xSr and has a plate-like structure. The maximum solubility of Al in Mg17Sr2 was found to be 21.3 at%. It was also observed that Mg38Sr9 dissolved 12.5 at% Al.

  18. Structure and anelasticity of Fe{sub 3}Ga and Fe{sub 3}(Ga,Al) type alloys

    Energy Technology Data Exchange (ETDEWEB)

    Golovin, I.S., E-mail: i.golovin@misis.ru [Department of Physical Metallurgy of Non-Ferrous Metals, National University of Science and Technology “MISIS”, Leninsky ave. 4, Moscow 117936 (Russian Federation); Palacheva, V.V.; Bazlov, A.I. [Department of Physical Metallurgy of Non-Ferrous Metals, National University of Science and Technology “MISIS”, Leninsky ave. 4, Moscow 117936 (Russian Federation); Cifre, J. [Serveis Cientificotecnics, Universitat de les Illes Balears, Ctra. deValldemossa, km. 7.5, E-07122 Palma de Mallorca (Spain); Pons, J. [Dept. de Fisica, Universitat de les Illes Balears, Ctra. deValldemossa, km. 7.5, E-07122 Palma de Mallorca (Spain)

    2015-09-25

    Highlights: • The A2 to D0{sub 3} transition in quenched Fe–27Ga takes place at heating from 150 to 300 °C. • The L1{sub 2} phase appears after incubation period at 350 °C and above. • The L1{sub 2} phase formation is accompanied by a transient internal friction peak. • Substitution of Ga atoms by Al slows down the massive formation of the L1{sub 2} phase. • TEM study of Fe–Ga–Al alloy proves weak D0{sub 3} ordering and formation L1{sub 2} phase. - Abstract: The structure of binary Fe–27at.%Ga and ternary Fe–18at.%Ga–6at.%Al alloys is studied after different annealing regimes of as quenched samples. This paper focuses mainly on early stages of different phase transitions: from A2 to D0{sub 3}, to L1{sub 2} and D0{sub 19}, which decrease functional properties of Fe–Ga alloys. Formation of stable phases goes through formation of metastable phases: according to XRD, the D0{sub 3} ordering of practically disordered A2 solid solution clearly takes place at 150 °C, while formation of equilibrium fcc ordered L1{sub 2} phase starts after four hours annealing at 350 °C. Upon continuous heating, the transition from D0{sub 3} to L1{sub 2} phase is accompanied by a transient internal friction peak. On its turn, the phase transitions are retarded in the ternary Fe–18Ga–5Al alloy, although a careful TEM study of the ternary alloy proves weak D0{sub 3} ordering in the as-quenched state and formation of small precipitates of L1{sub 2} phase (not detectable by X-ray) after four hours annealing at 275 °C. The presence of carbon in studied alloys leads to appearance of Snoek-type relaxation in both binary and ternary alloys: the peak in binary Fe–27Ga alloy is unimodal with activation energy of about 1 eV, and it has bi-modal shape in the ternary alloy Fe–18Ga–5Al with activation energies of about 1.1 and 1.4 eV, corresponding to carbon atom diffusion under stress in vicinity of Ga and Al atoms, respectively.

  19. Completed Local Ternary Pattern for Rotation Invariant Texture Classification

    Directory of Open Access Journals (Sweden)

    Taha H. Rassem

    2014-01-01

    Full Text Available Despite the fact that the two texture descriptors, the completed modeling of Local Binary Pattern (CLBP and the Completed Local Binary Count (CLBC, have achieved a remarkable accuracy for invariant rotation texture classification, they inherit some Local Binary Pattern (LBP drawbacks. The LBP is sensitive to noise, and different patterns of LBP may be classified into the same class that reduces its discriminating property. Although, the Local Ternary Pattern (LTP is proposed to be more robust to noise than LBP, however, the latter’s weakness may appear with the LTP as well as with LBP. In this paper, a novel completed modeling of the Local Ternary Pattern (LTP operator is proposed to overcome both LBP drawbacks, and an associated completed Local Ternary Pattern (CLTP scheme is developed for rotation invariant texture classification. The experimental results using four different texture databases show that the proposed CLTP achieved an impressive classification accuracy as compared to the CLBP and CLBC descriptors.

  20. On the interpretation, verification and calibration of ternary probabilistic forecasts

    CERN Document Server

    Jupp, Tim E; Coelho, Caio A S; Stephenson, David B

    2011-01-01

    We develop a geometrical interpretation of ternary probabilistic forecasts in which forecasts and observations are regarded as points inside a triangle. Within the triangle, we define a continuous colour palette in which hue and colour saturation are defined with reference to the observed climatology. In contrast to current methods, forecast maps created with this colour scheme convey all of the information present in each ternary forecast. The geometrical interpretation is then extended to verification under quadratic scoring rules (of which the Brier Score and the Ranked Probability Score are well--known examples). Each scoring rule defines an associated triangle in which the square roots of the \\emph{score}, the \\emph{reliability}, the \\emph{uncertainty} and the \\emph{resolution} all have natural interpretations as root--mean--square distances. This leads to our proposal for a \\emph{Ternary Reliability Diagram} in which data relating to verification and calibration can be summarised. We illustrate these id...

  1. [Synthesis and luminescence properties of reactive ternary europium complexes].

    Science.gov (United States)

    Guo, Dong-cai; Shu, Wan-gen; Zhang, Wei; Liu, You-nian; Zhou, Yue

    2004-09-01

    In this paper, five new reactive ternary europium complexes were synthesized with the first ligand of 1,10-phenanthroline and the reactive second ligands of maleic anhydride, acrylonitrile, undecenoic acid, oleic acid and linoleic acid, and also characterized by means of elemental analysis, EDTA titrimetric method, FTIR spectra and UV spectra. The fluorescence spectra show that the five new ternary complexes have much higher luminescence intensity than their corresponding binary complexes, and the synergy ability sequence of the five reactive ligands is as follows: linoleic acid > oleic acid > acrylonitrile > maleic anhydride > undecenoic acid. At the same time, the reactive ternary europium complexes coordinated with the reactive ligands, which can be copolymerized with other monomers, will provide a new way for the synthesis of bonding-type rare earth polymer functional materials with excellent luminescence properties.

  2. Thermodynamic evaluation of hypereutectic Al-Si (A390) alloy with addition of Mg

    Energy Technology Data Exchange (ETDEWEB)

    Hekmat-Ardakan, Alireza [Ecole Polytechnique de Montreal, Dep. de Genie Chimique, P.O. Box 6079, Centre-Ville, Montreal, Quebec, H3C 3A7 (Canada); Ajersch, Frank, E-mail: frank.ajersch@polymtl.ca [Ecole Polytechnique de Montreal, Dep. de Genie Chimique, P.O. Box 6079, Centre-Ville, Montreal, Quebec, H3C 3A7 (Canada)

    2010-05-15

    This paper presents the thermodynamic evaluation of A390 hypereutectic Al-Si alloy (Al-17% Si-4.5% Cu-0.5% Mg) and alloys up to 10% Mg, using the Factsage (registered) software. Two critical compositions were detected at 4.2% and 7.2% Mg where the temperatures of the liquidus, the start of the binary and of the ternary eutectic reaction are changed. These critical compositions show differences in the formation of Mg{sub 2}Si intermetallic particles during the solidification interval. For compositions up to 4.2% Mg, the Mg{sub 2}Si intermetallic phase first appears in the ternary eutectic zone. With Mg contents between 4.2% and 7.2%, Mg{sub 2}Si particle appears in both the binary and ternary eutectic reactions. Above 7.2% Mg, it solidifies as a primary phase and also during the binary and ternary reactions. The calculated liquid fraction vs. temperature curves also showed a decrease of the eutectic formation temperature (knee point temperature) with the addition of Mg content up to 4.2% Mg. This temperature becomes almost constant up to 10% Mg. The calculation of eutectic formation temperature shows a good agreement with differential scanning calorimetry (DSC) tests.

  3. Studies on yttrium-containing smart alloys

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Felix; Wegener, Tobias; Litnovsky, Andrey; Rasinski, Marcin; Linsmeier, Christian [Forschungszentrum Juelich GmbH, Institut fuer Energie- und Klimaforschung - Plasmaphysik (Germany); Mayer, Joachim [Ernst Ruska-Centrum, 52425 Juelich (Germany)

    2016-07-01

    Tungsten is the main candidate as plasma-facing armour material for future fusion reactors, like DEMO. Advantages of tungsten include high melting point, high thermal conductivity, low tritium retention, and low erosion yield. A problem is oxide volatilisation under accidental conditions where the temperature of the first wall can reach 1200 K to 1450 K and air ingress occurs. Therefore smart tungsten alloys are developed. Smart alloys are supposed to preserve properties of tungsten during plasma operation coupled with suppressed tungsten oxide formation in case of an accident. Lab-scale tungsten-chromium-yttrium (W-Cr-Y) samples prepared by magnetron sputtering are used as model system. The mechanisms of oxidation and its dynamics are studied using a thermogravimetric system, focussed ion beam, and electron microscopy. A composition scan was conducted: The new material composition featuring W, ∝ 12 wt.% Cr, ∝ 0.3 wt.% Y showed strongest suppression of oxidation, no pores, and least internal oxidation. At 1273 K in argon-oxygen atmosphere an oxidation rate of 3 . 10{sup -6} mg{sup 2}cm{sup -4}s{sup -1} was measured. At 1473 K ternary W-Cr-Y alloys suppressed evaporation up to 20 min while for W-Cr evaporation was already evident after 5 min. Comparison of passivation in dry and humid atmosphere, at temperatures of 1073 K to 1473 K is performed.

  4. Multimetallic alloy nanotubes with nanoporous framework.

    Science.gov (United States)

    Choi, Bu-Seo; Lee, Young Wook; Kang, Shin Wook; Hong, Jong Wook; Kim, Jung; Park, Inkyu; Han, Sang Woo

    2012-06-26

    One-dimensional nanotubes (NTs) that consist of multiple metallic components are promising platforms for potential applications, whereas only a few synthetic methods of multimetallic NTs have been reported to date. In the present work, we developed a general synthesis route for the production of uniform multicomponent one-dimensional tubular nanostructures with various combinations of Pt, Pd, and Ag by using ZnO nanowires (NWs) as sacrificial templates. The ZnO NWs serve not only as physical templates but also as nucleation sites for the reduction of metal precursors, and thereby several metal precursors could be reduced simultaneously to produce multimetallic NTs. By using this approach, Pt-Pd, Pt-Ag, and Pd-Ag binary alloy NTs, and even Pt-Pd-Ag ternary alloy NTs could be successfully prepared. The prepared Pt-Pd binary alloy NTs exhibited improved electrocatalytic activity and stability toward ethanol oxidation due to their characteristic tubular morphology with well-interconnected nanoporous framework and synergism between two constituent metals. Furthermore, our approach can facilitate the fabrication of patterned multimetallic NT arrays on solid and flexible substrates with strong mechanical robustness. The present templating method does not require any extra steps to remove templates or additional surfactants which are often required to control the shape of nanostructures. This strategy offers a convenient, versatile, low-cost, and highly valuable approach to the fabrication of multimetallic nanostructures with various components and compositions.

  5. The welding metallurgy of HASTELLOY alloys C-4, C-22, and C-276

    Science.gov (United States)

    Cieslak, M. J.; Headley, T. J.; Romig, A. D.

    1986-11-01

    The welding metallurgy (solidification and solid state transformations) of HASTELLOY* Alloys C-4, C-22, and C-276 has been determined. Varestraint hot-cracking tests performed on commercial alloys revealed a weldability ranking as follows: C-4 > C-22 > C-276. All alloys would be expected to have good weldability, with Alloy C-4 having a very low hot-cracking tendency, comparable to 304L stainless steel. Microstructures of gas-tungsten-arc welds of these alloys have been characterized by scanning electron microscopy and analytical electron microscopy. Intermetallic secondary solidification constituents have been found associated with weld metal hot cracks in Alloys C-276 and C-22. In Alloy C-276, this constituent is a combination of P and ώ phases, and in Alloy C-22, this constituent is composed of σ, P, and ώ phases. With phase composition data obtained by AEM techniques and available ternary (Ni-Cr-Mo) phase diagrams, an equivalent chemistry model is proposed to account for the microstructures observed in each alloy's weld metal.

  6. Effect of composition on the high rate dynamic behaviour of tungsten heavy alloys

    Directory of Open Access Journals (Sweden)

    Latif Kesemen

    2015-01-01

    Full Text Available Tungsten heavy alloys are currently used as kinetic energy penetrators in military applications due to their high density and superior mechanical properties. In the literature, quasi-static properties of different tungsten heavy alloys based on W-Ni-Cu and W-Ni-Fe ternary systems are well documented and presented. However, comparison of the dynamic behaviour of these alloys in terms of the correlation between quasi-static mechanical characterization and dynamical properties is lacking. In the present study, dynamic properties of tungsten heavy alloys having different binder phase compositions (90W-7Ni-3Cu and 90W-8Ni-2Fe at different projectile velocities were investigated. The examined and tested alloys were produced through the conventional powder metallurgy route of mixing, cold compaction and sintering. Mechanical characterization of these alloys was performed. In the ballistic tests, cylindrical tungsten heavy alloys with L/D ratio of 3 were impacted to hardened steel target at different projectile velocities. After the ballistic tests, deformation characteristics of test specimens during dynamic loading were evaluated by comparing the change of length and diameter of the specimens versus kinetic energy densities. The study concluded that 90W-8Ni-2Fe alloy has better perforation characteristics than 90W-7Ni-3Cu alloy.

  7. Effect of composition on the high rate dynamic behaviour of tungsten heavy alloys

    Science.gov (United States)

    Latif, Kesemen; Kaan, Çalışkan N.; Emrah, Konokman H.; Nuri, Durlu

    2015-09-01

    Tungsten heavy alloys are currently used as kinetic energy penetrators in military applications due to their high density and superior mechanical properties. In the literature, quasi-static properties of different tungsten heavy alloys based on W-Ni-Cu and W-Ni-Fe ternary systems are well documented and presented. However, comparison of the dynamic behaviour of these alloys in terms of the correlation between quasi-static mechanical characterization and dynamical properties is lacking. In the present study, dynamic properties of tungsten heavy alloys having different binder phase compositions (90W-7Ni-3Cu and 90W-8Ni-2Fe) at different projectile velocities were investigated. The examined and tested alloys were produced through the conventional powder metallurgy route of mixing, cold compaction and sintering. Mechanical characterization of these alloys was performed. In the ballistic tests, cylindrical tungsten heavy alloys with L/D ratio of 3 were impacted to hardened steel target at different projectile velocities. After the ballistic tests, deformation characteristics of test specimens during dynamic loading were evaluated by comparing the change of length and diameter of the specimens versus kinetic energy densities. The study concluded that 90W-8Ni-2Fe alloy has better perforation characteristics than 90W-7Ni-3Cu alloy.

  8. Changes in the interface structure and strength of diffusion brazed joints of Al-Si alloy castings

    Energy Technology Data Exchange (ETDEWEB)

    Osawa, T. [Aoyamagakuin Univ., Tokyo (Japan). Coll. of Science and Technology

    1995-06-01

    The diffusion brazing process, which utilizes diffusion between the base metal and the filler metal, has been tried for joining Al-Si alloy castings. If a ternary eutectic Al-Cu-Si alloy system with a lower melting point than the Al-Si system base metal is produced at the braze interface by the diffusion reaction between the base metal and the cooper filler metal, it may be possible to join an Al-Si system alloy casting by the diffusion brazing process, using a ternary eutectic Al-Si-Cu alloy as a filler metal. In this experiment both copper and brass materials were used as preforms. It was clarified that the diffusion brazing process with a copper or brass preform could be used for all hypoeutectic, eutectic and hypereutectic alloys of Al-Si system castings, and that the minimum temperature where the braze interface, showed a liquid phase structure was 530 C for the copper preform and 510 C for the brass preform. The shear strength of the diffusion brazed joint was dependent on the chemical compositions of the base metal, the type of material for the preform, and brazing temperature and time. The maximum strength of the diffusion brazed joint under optimum conditions was 130 to 150 MPa for the base metal of both Al-7Si and Al-12Si alloy castings and 100 to 130 MPa for the base metal of Al-20Si alloy casting.

  9. Ternary jitter-based true random number generator

    Science.gov (United States)

    Latypov, Rustam; Stolov, Evgeni

    2017-01-01

    In this paper a novel family of generators producing true uniform random numbers in ternary logic is presented. The generator consists of a number of identical ternary logic combinational units connected into a ring. All the units are provided to have a random delay time, and this time is supposed to be distributed in accordance with an exponential distribution. All delays are supposed to be independent events. The theory of the generator is based on Erlang equations. The generator can be used for test production in various systems. Features of multidimensional random vectors, produced by the generator, are discussed.

  10. Liquid-liquid equilibria for ternary polymer mixtures

    Science.gov (United States)

    Oh, Suk Yung; Bae, Young Chan

    2011-01-01

    A molecular thermodynamic model for multicomponent systems based on a closed-packed lattice model is presented based on two contributions; entropy and energy contribution. The calculated liquid-liquid equilibria of ternary chainlike mixtures agreed with Monte Carlo simulation results. The proposed model can satisfactorily predict Types 0, 1, 2 and 3 phase separations of the Treybal classification. The model parameters obtained from the binary systems were used to directly predict real ternary systems and the calculated results correlated well with experimental data using few adjustable parameters. Specific interactions in associated binary systems were considered using a secondary lattice.

  11. PM1 steganographic algorithm using ternary Hamming Code

    Directory of Open Access Journals (Sweden)

    Kamil Kaczyński

    2015-12-01

    Full Text Available PM1 algorithm is a modification of well-known LSB steganographic algorithm. It has increased resistance to selected steganalytic attacks and increased embedding efficiency. Due to its uniqueness, PM1 algorithm allows us to use of larger alphabet of symbols, making it possible to further increase steganographic capacity. In this paper, we present the modified PM1 algorithm which utilizies so-called syndrome coding and ternary Hamming code. The modified algorithm has increased embedding efficiency, which means fewer changes introduced to carrier and increased capacity.[b]Keywords[/b]: steganography, linear codes, PM1, LSB, ternary Hamming code

  12. First principles investigation of the activity of thin film Pt, Pd and Au surface alloys for oxygen reduction

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Hansen, Heine Anton; Rossmeisl, Jan

    2015-01-01

    Further advances in fuel cell technologies are hampered by kinetic limitations associated with the sluggish cathodic oxygen reduction reaction. We have investigated a range of different formulations of binary and ternary Pt, Pd and Au thin films as electrocatalysts for oxygen reduction. The most...... driving force for surface segregation, diffusion to defects or surface self-assembling. On the basis of stability and activity analysis we conclude that the near surface alloy of Pd in Pt and some PdAu binary and PtPdAu ternary thin films with a controlled amount of Au are the best catalysts for oxygen...

  13. The ternary system: silicon-uranium-vanadium

    Energy Technology Data Exchange (ETDEWEB)

    Noel, Henri [Laboratoire de Chimie du Solide et Materiaux, UMR-CNRS 6226, Universite de Rennes I, Avenue du General Leclerc, F-35042 Rennes, Cedex (France); Rogl, Peter Franz, E-mail: peter.franz.rogl@univie.ac.a [Institute of Physical Chemistry, University of Vienna, A-1090 Wien, Waehringerstrasse 42 (Austria)

    2010-09-01

    Phase equilibria in the system Si-U-V were established at 1100 {sup o}C by optical microscopy, EMPA and X-ray diffraction. Two ternary compounds were observed, U{sub 2}V{sub 3}Si{sub 4} and (U{sub 1-x}V{sub x}){sub 5}Si{sub 3}, for which the crystal structures were elucidated by X-ray powder data refinement and found to be isotypic with the monoclinic U{sub 2}Mo{sub 3}Si{sub 4}-type (space group P2{sub 1}/c; a = 0.6821(3), b = 0.6820(4), c = 0.6735(3) nm, {beta} = 109.77(1){sup o}) and the tetragonal W{sub 5}Si{sub 3}-type (space group I4/mcm, a = 1.06825(2), c = 0.52764(2) nm), respectively. (U{sub 1-x}V{sub x}){sub 5}Si{sub 3} appears at 1100 {sup o}C without any significant homogeneity region at x {approx} 0.2 resulting in a formula U{sub 4}VSi{sub 3} which corresponds to a fully ordered atom arrangement. DTA experiments clearly show decomposition of this phase above 1206 {sup o}C revealing a two-phase region U{sub 3}Si{sub 2} + V{sub 3}Si. At 1100 {sup o}C U{sub 4}VSi{sub 3} is in equilibrium with V{sub 3}Si, V{sub 5}Si{sub 3}, U{sub 3}Si{sub 2} and U(V). At 800 {sup o}C U{sub 4}VSi{sub 3} forms one vertex of the tie-triangle to U{sub 3}Si and V{sub 3}Si. Due to the rather high thermodynamic stability of V{sub 3}Si and the corresponding tie-lines V{sub 3}Si + liquid at 1100 {sup o}C and V{sub 3}Si + U(V) below 925 {sup o}C, no compatibility exists between U{sub 3}Si or U{sub 3}Si{sub 2} and vanadium metal.

  14. Microstructure, Mechanical Property, and Phase Transformation of Quaternary NiTiFeNb and NiTiFeTa Shape Memory Alloys

    National Research Council Canada - National Science Library

    Yulong Liang; Shuyong Jiang; Yanqiu Zhang; Junbo Yu

    2017-01-01

    Based on ternary Ni45Ti51.8Fe3.2 (at %) shape memory alloy (SMA), Nb and Ta elements are added to an NiTiFe SMA by replacing Ni element, and consequently quaternary Ni44Ti51.8Fe3.2Nb1 and Ni44Ti51.8Fe3.2Ta1...

  15. The atomic structure of ternary amorphous TixSi1-xO2 hybrid oxides.

    Science.gov (United States)

    Landmann, M; Köhler, T; Rauls, E; Frauenheim, T; Schmidt, W G

    2014-06-25

    Atomic length-scale order characteristics of binary and ternary amorphous oxides are presented within the framework of ab initio theory. A combined numerically efficient density functional based tight-binding molecular dynamics and density functional theory approach is applied to model the amorphous (a) phases of SiO2 and TiO2 as well as the amorphous phase of atomically mixed TixSi1-xO2 hybrid-oxide alloys over the entire composition range. Short and mid-range order in the disordered material phases are characterized by bond length and bond-angle statistics, pair distribution function analysis, coordination number and coordination polyhedra statistics, as well as ring statistics. The present study provides fundamental insights into the order characteristics of the amorphous hybrid-oxide frameworks formed by versatile types of TiOn and SiOm coordination polyhedra. In a-SiO2 the fourfold crystal coordination of Si ions is almost completely preserved and the atomic structure is widely dominated by ring-like mid-range order characteristics. In contrast, the structural disorder of a-TiO2 arises from short-range disorder in the local coordination environment of the Ti ion. The coordination number analysis indicates a large amount of over and under-coordinated Ti ions (coordination defects) in a-TiO2. Aside from the ubiquitous distortions of the crystal-like coordinated polyhedra, even the basic coordination-polyhedra geometry type changes for a significant fraction of TiO6 units (geometry defects). The combined effects of topological and chemical disorder in a-TixSi1-xO2 alloys lead to a continuos increase in both the Si as well as the Ti coordination number with the chemical composition x. The important roles of intermediate fivefold coordination states of Ti and Si cations are highlighted for ternary a-TixSi1-xO2 as well as for binary a-TiO2. The continuous decrease in ring size with increasing Ti content reflects the progressive loss of mid-range order structure

  16. Preparation of Binary and Ternary Oxides by Molten Salt Method and its Electrochemical Properties

    Science.gov (United States)

    Reddy, M. V.; Theng, L. Pei; Soh, Hulbert; Beichen, Z.; Jiahuan, F.; Yu, C.; Ling, A. Yen; Andreea, L. Y.; Ng, C. H. Justin; Liang, T. J. L. Galen; Ian, M. F.; An, H. V. T.; Ramanathan, K.; Kevin, C. W. J.; Daryl, T. Y. W.; Hao, T. Yi; Loh, K. P.; Chowdari, B. V. R.

    2013-07-01

    We report simple binary oxides namely SnO2, TiO2, CuO, MnO2, Fe2O3, Co3O4 and ternary oxides like MnCo2O4 by molten salt method at a temperature range of 280°C to 950°C in air and discuss the effect of morphology, crystal structure and electrochemical properties of binary and ternary oxides. Materials were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Brunauer-Emmett-Teller (BET) surface area methods. XRD patterns showed all MSM prepared materials exhibited characteristic lattice parameter values. BET surface area varies depending on the nature of the material, molten salt and preparation temperature and the obtained values are in the range, 1 to 160 m2/g. Electrochemical properties were studied using cyclic voltammetry (CV) and electrochemical performance studies were carried in the voltage range, 0.005-1.0V for SnO2, 1.0-2.8V for TiO2 and Fe2O3, MCo2O4 (M = Co, Mn), MnO2 and CuO were cycled in the range, 0.005-3.0V. At a current rates of 30-100 mA/g and a scan rate of 0.058 mV/sec was used for galvanostatic cycling and cyclic voltammetry. SnO2 showed that an alloying-de-alloying reaction occurs at ˜0.2 and ˜0.5 V vs. Li. TiO2 main intercalation and de-interaction reactions at ˜1.7 and ˜1.8 V vs. Li. Co3O4, MnCo2O4, and MnO2 main discharge potentials at ˜1.2, 0.9V and 0.4V, resp. and charge potentials peak ˜2.0V and 1.5V vs. Li. CuO prepared at 750°C exhibited main anodic peak at ˜2.45V and cathodic peaks at ˜0.85V and ˜1.25V. We discussed the possible reaction mechanisms and Li-storage performance values in detail.

  17. Electrical resistivity of NaPb compound-forming liquid alloy using ab ...

    Indian Academy of Sciences (India)

    Complex formation model [17,18] has its basis on the fact that a typical binary liquid alloy forms a compound at one or more stoichiometric compositions and therefore behaves like a ternary mixture consisting of free atoms A, B and a chemical compound or pseudomolecule AαBβ such that αA + βB = AαBβ. There are nA.

  18. Hot corrosion resistance of nickel-chromium-aluminum alloys

    Science.gov (United States)

    Santoro, G. J.; Barret, C. A.

    1977-01-01

    The hot corrosion resistance of nickel-chromium-aluminum alloys was examined by cyclically oxidizing sodium sulfate-coated specimens in still air at 900, 1000, and 1100 C. The compositions tested were within the ternary region: Ni, Ni-50 at.% Cr, and Ni-50 at.% Al. At each temperature the corrosion data were statistically fitted to a third order regression equation as a function of chromium and aluminum contents. From these equations corrosion isopleths were prepared. Compositional regions with the best hot corrosion resistance were identified.

  19. Measurements for Cu and Si diffusivities in Al-Cu-Si alloys by diffusion couples

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Dingfei [College of Materials Science and Engineering, Chongqing University, Chongqing 400045 (China)]. E-mail: zhangdingfei@cqu.edu.cn; Morral, John E. [Department of Materials Science and Engineering, Ohio State University, OH 43210 (United States); Brody, Harold D. [Institute of Materials Science, University of Connecticut, CT 06268 (United States)

    2007-02-25

    This paper deals with diffusivity measurements for Cu and Si atoms in Al-Cu-Si alloys by diffusion couples. With Cu and Si concentration profiles in the diffusion couples treated by different heating temperatures and times, their diffusivities including D {sub CuCu}, D {sub SiSi}, D {sub CuSi} and D {sub SiCu} in Al-Cu-Si ternary alloys could be calculated and their D {sub 0} and Q also could be obtained by their diffusivities under different temperatures.

  20. Equilibrium compositional distribution in freestanding ternary semiconductor quantum dots: the case of In(x)Ga(1-x)As.

    Science.gov (United States)

    Pandey, Sumeet C; Maroudas, Dimitrios

    2011-12-21

    We report the findings of a systematic computational study that addresses the effects of surface segregation on the atomic distribution at equilibrium of constituent group-III atoms in freestanding ternary semiconductor In(x)Ga(1-x)As nanocrystals. Our analysis is based on density functional theory calculations in conjunction with Monte Carlo simulations of the freestanding nanocrystals using a DFT-re-parameterized valence force field description of interatomic interactions. We have determined the equilibrium concentration profiles as a function of nanocrystal size (d), composition (x), and temperature (T). The ranges of d, x, and T are explored and demonstrate surface segregation and phase separation that leads to different extents of alloying in the nanocrystal core and in the near-surface regions. We find that formation of core/shell-like quantum dots characterized by an In-deficient core and an In-rich shell with a diffuse interface is favored at equilibrium. The analysis elucidates the relationship between the constituent species distribution in the nanocrystal and the parameters that can be tuned experimentally to design synthesis routes for tailoring the properties of ternary quantum dots.

  1. Equilibrium Compositional Distribution in Freestanding Ternary Semiconductor Quantum Dots: The Case of In(x)Ga(1-x)As

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, Sumeet C.; Maroudas, Dimitrios

    2011-01-01

    We report the findings of a systematic computational study that addresses the effects of surface segregation on the atomic distribution at equilibrium of constituent group-III atoms in freestanding ternary semiconductor InxGa1-xAs nanocrystals. Our analysis is based on density functional theory calculations in conjunction with Monte Carlo simulations of the freestanding nanocrystals using a DFT-re-parameterized valence force field description of interatomic interactions. We have determined the equilibrium concentration profiles as a function of nanocrystal size (d), composition (x), and temperature (T). The ranges of d, x, and T are explored and demonstrate surface segregation and phase separation that leads to different extents of alloying in the nanocrystal core and in the near-surface regions. We find that formation of core/shell-like quantum dots characterized by an In-deficient core and an In-rich shell with a diffuse interface is favored at equilibrium. The analysis elucidates the relationship between the constituent species distribution in the nanocrystal and the parameters that can be tuned experimentally to design synthesis routes for tailoring the properties of ternary quantum dots.

  2. Co(x)Ni(4-x)Sb(12-y)Sn(y) Ternary Skutterudites: Processing and Thermoelectric Properties

    Science.gov (United States)

    Mackey, Jon; Sehirlioglu, Alp; Dynys, Fred

    2014-01-01

    Skutterudites have proven to be a useful thermoelectric system as a result of their high figure of merit, favorable mechanical properties, and good thermal stability. Binary skutterudites have received the majority of interest in recent years, as a result of successful double and triple filling schemes. Ternary skutterudites, such as Ni4Sb7Sn5, also demonstrate good thermoelectric performance, with high power factor and low thermal conductivity. Ternary skutterudites, as contrasted to binary systems, provide more possibility for tuning electronic structure as substitutions can be studied on three elements. The Co(x)Ni(4-x)Sb(12-y)Sn(y) system has been investigated as both a p- and n-type thermoelectric material, stable up to 200 C. The system is processed through a combination of solidification, mechanical alloying, and hot pressing steps. Rietveld structure refinement has revealed an interesting occupancy of Sn on both the 24g Wyckoff position with Sb as well as the 2a position as a rattler. In addition to thermoelectric properties, detailed processing routes have been investigated on the system.

  3. The precipitation process in Mg-Ca-(Zn) alloys investigated by positron annihilation spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, Yanicet [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain); Departamento de Fisica de Materiales, Facultad de Ciencias Fisicas, Universidad Complutense de Madrid, 28040 Madrid (Spain)], E-mail: yanicet@fis.ucm.es; Monge, Miguel Angel; Pareja, Ramiro [Departamento de Fisica, Universidad Carlos III de Madrid, 28911 Leganes (Spain)

    2008-09-08

    Coincidence doppler broadening (CDB) spectroscopy has been applied to study the precipitation process induced by aging in Mg-1.0 wt.% Ca and Mg-1.0 wt.% Ca-1.0 wt.% Zn alloys. In addition positron lifetime experiments and microhardness measurements have been performed. A peak centered at {approx}11.5 x 10{sup -3}m{sub 0}c is found in the CDB ratio spectra of the alloys aged at 473 K. It is attributed to annihilations with the core electrons of Ca. The results indicate the formation of a particle dispersion that hardens the alloys. This dispersion is correlated with the appearance of the peak attributed to Ca atoms. Zn atoms in the Mg matrix inhibit the formation of quenched-in vacancies bound to Ca atoms in the aged ternary alloy producing the dispersion refinement.

  4. Oxidation of zirconium alloys in 2.5 kPa water vapor for tritium readiness.

    Energy Technology Data Exchange (ETDEWEB)

    Mills, Bernice E.

    2007-11-01

    A more reactive liner material is needed for use as liner and cruciform material in tritium producing burnable absorber rods (TPBAR) in commercial light water nuclear reactors (CLWR). The function of these components is to convert any water that is released from the Li-6 enriched lithium aluminate breeder material to oxide and hydrogen that can be gettered, thus minimizing the permeation of tritium into the reactor coolant. Fourteen zirconium alloys were exposed to 2.5 kPa water vapor in a helium stream at 300 C over a period of up to 35 days. Experimental alloys with aluminum, yttrium, vanadium, titanium, and scandium, some of which also included ternaries with nickel, were included along with a high nitrogen impurity alloy and the commercial alloy Zircaloy-2. They displayed a reactivity range of almost 500, with Zircaloy-2 being the least reactive.

  5. Structure, electronic and mechanical properties of Ga1-xBxP alloys

    Science.gov (United States)

    Zhao, Bin; Zhang, Junqin; Ma, Huihui; Wei, Qun; Yang, Yintang

    2017-09-01

    The structural, electronic and mechanical properties of Ga1-xBxP ternary alloys are carried out by the first-principles based on density functional theory. We studied the effect of composition on the ground state properties such as lattice parameter, band gap and elastic modulus and anisotropy. The elastic anisotropy of Ga1-xBxP alloys have been described through different anisotropic factors. We analyzed elastic anisotropy by depicting the three-dimensional surface structure of elastic modulus. Due to the introduction of boron atoms, the Ga1-xBxP alloys become direct-gap semiconductors at x = 0.25, 0.50 and 0.75. At last, we calculated the average acoustic velocity in different directions and the Debye temperatures for the Ga1-xBxP alloys.

  6. Studies on Molecular Interaction in Ternary Liquid Mixtures

    Directory of Open Access Journals (Sweden)

    R. Uvarani

    2010-01-01

    Full Text Available Ultrasonic velocity, density and viscosity for the ternary liquid mixtures of cyclohexanone with 1-propanol and 1-butanol in carbon tetrachloride were measured at 303 K. The acoustical parameters and their excess values were calculated. The trends in the variation of these excess parameters were used to discuss the nature and strength of the interactions present between the component molecules.

  7. Hierarchic structure formation in binary and ternary polymer blends

    NARCIS (Netherlands)

    Sprenger, M; Walheim, S; Budkowski, A; Steiner, U

    The phase morphology of multi-component polymer blends is governed by the interfacial interactions of its components. We discuss here the domain morphology in thin films of model binary and ternary polymer blends containing polystyrene, poly(methyl metacrylate), and poly(2-vinylpyridine) (PS, PMMA,

  8. Mechanical, microstructure and electrical properties of ternary ZnO ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 38; Issue 3. Mechanical, microstructure and electrical properties of ternary ZnO–V2O5–Mn3O4 varistor with sintering temperature. S El-Rabai A H Khafagy M T Dawoud M T Attia. Volume 38 Issue 3 June 2015 pp 773-781 ...

  9. Intermolecular Interactions in Ternary Glycerol–Sample–H2O

    DEFF Research Database (Denmark)

    Westh, Peter; Rasmussen, Erik Lumby; Koga, Yoshikata

    2011-01-01

    We studied the intermolecular interactions in ternary glycerol (Gly)–sample (S)–H2O systems at 25 °C. By measuring the excess partial molar enthalpy of Gly, HGlyEHEGly, we evaluated the Gly–Gly enthalpic interaction, HGly-GlyEHEGly--Gly, in the presence of various samples (S). For S, tert...

  10. Excess isentropic compressibility and speed of sound of the ternary ...

    Indian Academy of Sciences (India)

    These excess properties of the binary mixtures were fitted to Redlich-Kister equation, while the Cibulka's equation was used to fit the values related to the values to the ternary system. These excess properties have been used to discuss the presence of significant interactions between the component molecules in the binary ...

  11. Robust self-triggered coordination with ternary controllers

    NARCIS (Netherlands)

    De Persis, Claudio; Frasca, Paolo

    2013-01-01

    This paper regards the coordination of networked systems, studied in the framework of hybrid dynamical systems. We design a coordination scheme which combines the use of ternary controllers with a self-triggered communication policy. The communication policy requires the agents to measure, at each

  12. Univolatility curves in ternary mixtures: geometry and numerical computation

    DEFF Research Database (Denmark)

    Shcherbakova, Nataliya; Rodriguez-Donis, Ivonne; Abildskov, Jens

    2017-01-01

    We propose a new non-iterative numerical algorithm allowing computation of all univolatility curves in homogeneous ternary mixtures independently of the presence of the azeotropes. The key point is the concept of generalized univolatility curves in the 3D state space, which allows the main...... computational part to be reduced to a simple integration of a system of ordinary differential equations....

  13. Evaluation of griseofulvin binary and ternary solid dispersions with HPMCAS.

    Science.gov (United States)

    Al-Obaidi, Hisham; Buckton, Graham

    2009-01-01

    The stability and dissolution properties of griseofulvin binary and ternary solid dispersions were evaluated. Solid dispersions of griseofulvin and hydroxypropyl methylcellulose acetate succinate (HPMCAS) were prepared using the spray drying method. A third polymer, poly[N-(2-hydroxypropyl)methacrylate] (PHPMA), was incorporated to investigate its effect on the interaction of griseofulvin with HPMCAS. In this case, HPMCAS can form H bonds with griseofulvin directly; the addition of PHPMA to the solid dispersion may enhance the stability of the amorphous griseofulvin due to greater interaction with griseofulvin. The X-ray powder diffraction results showed that griseofulvin (binary and ternary solid dispersions) remained amorphous for more than 19 months stored at 85% RH compared with the spray-dried griseofulvin which crystallized totally within 24 h at ambient conditions. The Fourier transform infrared scan showed that griseofulvin carbonyl group formed hydrogen bonds with the hydroxyl group in the HPMCAS, which could explain the extended stability of the drug. Further broadening in the peak could be seen when PHPMA was added to the solid dispersion, which indicates stronger interaction. The glass transition temperatures increased in the ternary solid dispersions regardless of HPMCAS grade. The dissolution rate of the drug in the solid dispersion (both binary and ternary) has significantly increased when compared with the dissolution profile of the spray-dried griseofulvin. These results reveal significant stability of the amorphous form due to the hydrogen bond formation with the polymer. The addition of the third polymer improved the stability but had a minor impact on dissolution.

  14. Excess isentropic compressibility and speed of sound of the ternary ...

    Indian Academy of Sciences (India)

    relation (NR), Van Deal's ideal mixing relation (IMR) and Junjie's relation (JR). The results are used to ... The compounds used were 2-propanol (>99 mass%), diethyl ether (>99.5 mass%) and n-hexane (>99 .... The excess speed of sound, uE, is estimated in binary and ternary mixtures using the following expression:.

  15. Viscometric and thermodynamic studies of interactions in ternary ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 117; Issue 3. Viscometric and thermodynamic studies of interactions in ternary solutions containing sucrose and aqueous alkali metal halides at 293.15, 303.15 and 313.15 K. Reena Gupta Mukhtar Singh. Volume 117 Issue 3 May 2005 pp 275-282 ...

  16. Modeling adsorption of binary and ternary mixtures on microporous media

    DEFF Research Database (Denmark)

    Monsalvo, Matias Alfonso; Shapiro, Alexander

    2007-01-01

    The goal of this work is to analyze the adsorption of binary and ternary mixtures on the basis of the multicomponent potential theory of adsorption (MPTA). In the MPTA, the adsorbate is considered as a segregated mixture in the external potential field emitted by the solid adsorbent. This makes i...

  17. A Simple Refraction Experiment for Probing Diffusion in Ternary Mixtures

    Science.gov (United States)

    Coutinho, Cecil A.; Mankidy, Bijith D.; Gupta, Vinay K.

    2010-01-01

    Diffusion is a fundamental phenomenon that is vital in many chemical processes such as mass transport in living cells, corrosion, and separations. We describe a simple undergraduate-level experiment based on Weiner's Method to probe diffusion in a ternary aqueous mixture of small molecular-weight molecules. As an illustration, the experiment…

  18. Electron paramagnetic resonance study of ternary Cu compounds ...

    Indian Academy of Sciences (India)

    Abstract. We report here electron paramagnetic resonance (EPR) measurements at 9 and 34 GHz, and room temperature (T ), in powder and single crystal samples of the ternary compounds of copper nitrate or copper chloride with glycine and 1,10-phenanthroline [Cu(Gly)(phen)(H2O)]·NO3·1.5H2O (1) and.

  19. IMPROVING THE PROPERTIES OF MILD STEEL BY TERNARY ...

    African Journals Online (AJOL)

    Protective coatings are perhaps the most extensively used system for chemical and mechanical degradation in application. ... mechanical and electrochemical resistance bond needful during application. .... binary phase of SiC and ZrO2 results to a reduction in the hardness value compare to the ternary phase which is in ...

  20. Experimental examination of ternary fission in nuclear track emulsion

    Science.gov (United States)

    Mamatkulov, K. Z.; Ambrožová, I.; Artemenkov, D. A.; Bradnova, V.; Firu, E.; Haiduc, M.; Kakona, M.; Kattabekov, R. R.; Marey, A.; Neagu, A.; Ploc, O.; Rusakova, V. V.; Stanoeva, R.; Turek, K.; Zaitsev, A. A.; Zarubin, P. I.; Zarubina, I. G.

    2017-11-01

    Activities performed in preparation for the search for ternary fission of heavy nuclei and the analysis of fragment angular correlations with nuclear track emulsion and an automated microscope are detailed. Surface irradiation of nuclear emulsion by a Cf source was initiated. Planar events containing nothing but fragment triples were found and studied.

  1. Multiscale Modeling of Grain Boundary Segregation and Embrittlement in Tungsten for Mechanistic Design of Alloys for Coal Fired Plants

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Jian; Tomar, Vikas; Zhou, Naixie; Lee, Hongsuk

    2013-06-30

    Based on a recent discovery of premelting-like grain boundary segregation in refractory metals occurring at high temperatures and/or high alloying levels, this project investigated grain boundary segregation and embrittlement in tungsten (W) based alloys. Specifically, new interfacial thermodynamic models have been developed and quantified to predict high-temperature grain boundary segregation in the W-Ni binary alloy and W-Ni-Fe, W-Ni-Ti, W-Ni-Co, W-Ni-Cr, W-Ni-Zr and W-Ni-Nb ternary alloys. The thermodynamic modeling results have been experimentally validated for selected systems. Furthermore, multiscale modeling has been conducted at continuum, atomistic and quantum-mechanical levels to link grain boundary segregation with embrittlement. In summary, this 3-year project has successfully developed a theoretical framework in combination with a multiscale modeling strategy for predicting grain boundary segregation and embrittlement in W based alloys.

  2. In vitro corrosion properties and cytocompatibility of Fe-Ga alloys as potential biodegradable metallic materials.

    Science.gov (United States)

    Wang, Henan; Zheng, Yang; Liu, Jinghua; Jiang, Chengbao; Li, Yan

    2017-02-01

    The in vitro biodegradable properties and cytocompatibility of Fe-Ga alloys including Fe81Ga19, (Fe81Ga19)98B2 and (Fe81Ga19)99.5(TaC)0.5, and pure Fe were investigated for biomedical applications. The microstructure of the alloys was characterized using X-ray diffraction spectroscopy and optical microscopy. The results showed that A2 and D03 phases were detected for the three types of Fe-Ga alloys, and additional Fe2B and TaC phases were found in the (Fe81Ga19)98B2 and (Fe81Ga19)99.5(TaC)0.5 alloys, respectively. The corrosion rates of the Fe-Ga alloys were higher than that of pure Fe, as demonstrated by both potentiodynamic polarization measurements and immersion tests in simulated body fluid. The alloying element Ga lowered the corrosion potential of the Fe matrix and made it more susceptible to corrosion. Severe pitting corrosion developed on the surface of the Fe81Ga19 alloy after the addition of ternary B or TaC due to the multi-phase microstructures. The MC3T3-E1 cells exhibited good adhesion and proliferation behavior on the surfaces of the Fe-Ga alloys after culture for 4h and 24h. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Crystal structure of the ternary silicide Gd2Re3Si5

    Directory of Open Access Journals (Sweden)

    Vitaliia Fedyna

    2014-12-01

    Full Text Available A single crystal of the title compound, the ternary silicide digadolinium trirhenium pentasilicide, Gd2Re3Si5, was isolated from an alloy of nominal composition Gd20Re30Si50 synthesized by arc melting and investigated by X-ray single-crystal diffraction. Its crystal structure belongs to the U2Mn3Si5 structure type. All atoms in the asymmetric lie on special positions. The Gd site has site symmetry m..; the two Mn atoms have site symmetries m.. and 2.22; the three Si atoms have site symmetries m.., ..2 and 4.. . The coordination polyhedra of the Gd atoms have 21 vertices, while those of the Re atoms are cubooctahedra and 13-vertex polyhedra. The Si atoms are arranged as tricapped trigonal prisms, bicapped square antiprisms, or 11-vertex polyhedra. The crystal structure of the title compound is also related to the structure types CaBe2Ge2 and W5Si3. It can be represented as a stacking of Gd-centred polyhedra of composition [GdSi9]. The Re atoms form infinite chains with an Re—Re distance of 2.78163 (5 Å and isolated squares with an Re—Re distance of 2.9683 (6 Å.

  4. Enhanced formic acid electro-oxidation reaction on ternary Pd-Ir-Cu/C catalyst

    Science.gov (United States)

    Chen, Jinwei; Zhang, Jie; Jiang, Yiwu; Yang, Liu; Zhong, Jing; Wang, Gang; Wang, Ruilin

    2015-12-01

    Aim to further reduce the cost of Pd-Ir for formic acid electro-oxidation (FAEO), the Cu was used to construct a ternary metallic alloy catalyst. The prepared catalysts are characterized using XRD, TGA, EDX, TEM, XPS, CO-stripping, cyclic voltammetry and chronoamperometry. It is found that the Pd18Ir1Cu6 nanoparticles with a mean size of 3.3 nm are highly dispersed on carbon support. Componential distributions on catalyst are consistent with initial contents. Electrochemical measurements show that the PdIrCu/C catalyst exhibits the highest activity for FAEO. The mass activity of Pd in Pd18Ir1Cu6/C at 0.16 V (vs. SCE) is about 1.47, 1.62 and 2.08 times as high as that of Pd18Cu6/C, Pd18Ir1/C and Pd/C, respectively. The activity enhancement of PdIrCu/C should be attributed to the weakened CO adsorption strength and the removal of adsorbed intermediates at lower potential with the addition of Cu and Ir.

  5. Influence of tin additions on the precipitation processes in a Cu-Ni-Zn alloys; Influencia de la adicion de estano en el proceso de precipitacion en una aleacion de Cu-Ni-Zn

    Energy Technology Data Exchange (ETDEWEB)

    Donoso, E. C.; Dianez, M. J.; Criado, J. M.; Espinoza, R.; Mosquera, E.

    2016-05-01

    The influence of 1.1 wt% tin additions on the precipitation hardening of Cu-11 wt% Ni-20 wt% Zn alloy was studied by Differential Scanning Calorimetry (DSC), microhardeness measurements and High Resolution Transmission Electron Microscopy (HRTEM). The calorimetric curves, in the range of temperatures analyzed, show the presence of two exothermic reactions in the ternary alloy, associated to the short-range-order development assisted by migration of excess vacancies. On the other hand, one exothermic and one endothermic reaction are observed in the quaternary alloy, associated to the formation and dissolution of Cu{sub 2}NiZn precipitates, respectively. It has been show that an addition of 1.1% tin plays an important role in the formation of Cu{sub 2}NiZn precipitates, responsible for the precipitation hardening of the ternary alloy. (Author)

  6. In Situ Synthesis of Al-Si-Cu Alloy During Brazing Process and Mechanical Property of Brazing Joint

    OpenAIRE

    LONG Wei-min; LU Quan-bin; He, Peng; XUE Song-bai; Wu, Ming-Fang; Xue, Peng

    2016-01-01

    The Al-Si-Cu alloy system is considered to be a promising choice of filler metal for aluminium alloys brazing due to its high strength and low melting point. The greatest obstacle is its lack of plastic forming ability and being difficult to be processed by conventional methods. This disadvantage is ascribed to the considerable amount of brittle CuAl2 intermetallic compound which forms when alloy composition is around the ternary eutectic point. In order to overcome this deficiency, authors o...

  7. Structural, electric and kinetic parameters of ternary alloys of GeSbTe

    Energy Technology Data Exchange (ETDEWEB)

    Morales-Sanchez, E. [Centro de Investigacion y de Estudios Avanzados del IPN, Unidad Queretaro, Libramiento Norponiente 2000, Ap. Postal 13, Juriquilla, Queretaro, C. P. 76230, (Mexico)]. E-mail: m6007@ciateq.net.mx; Prokhorov, E.F. [Centro de Investigacion y de Estudios Avanzados del IPN, Unidad Queretaro, Libramiento Norponiente 2000, Ap. Postal 13, Juriquilla, Queretaro, C. P. 76230, (Mexico); Gonzalez-Hernandez, J. [Centro de Investigacion y de Estudios Avanzados del IPN, Unidad Queretaro, Libramiento Norponiente 2000, Ap. Postal 13, Juriquilla, Queretaro, C. P. 76230, (Mexico); Mendoza-Galvan, A. [Centro de Investigacion y de Estudios Avanzados del IPN, Unidad Queretaro, Libramiento Norponiente 2000, Ap. Postal 13, Juriquilla, Queretaro, C. P. 76230, (Mexico)

    2005-01-03

    Thin amorphous films of GeSbTe have been widely employed in the technology used for phase change optical memory or compact disks. In this article, we report on measurements of resistance, transmittance, and X-ray diffraction in thin films with stoichiometric compositions of Ge{sub 1}Sb{sub 4}Te{sub 7}, Ge{sub 1}Sb{sub 2}Te{sub 4}, Ge{sub 2}Sb{sub 2}Te{sub 5}, and Ge{sub 4}Sb{sub 1}Te{sub 5.} The resistivity, lattice constant, and the temperature at which transformation from the amorphous phase to the cubic crystalline structure occurs were calculated for each stoichiometric composition, and the energy activation was determined, applying Kissinger's model. It was found that the Ge{sub 4}Sb{sub 1}Te{sub 5} composition has the highest crystallization temperature (425 K), the highest resistivity (0.178 {omega} cm), the greatest E{sub a} (3.09 eV), and the lowest lattice constant (a=5.975 A) in the cubic phase at 170 deg C.

  8. Influence of indium clustering on the band structure of semiconducting ternary and quaternarynitride alloys

    DEFF Research Database (Denmark)

    Gorczyca,, I.; Łepkowski, S. P.; Suski, T.

    2009-01-01

    and atomic arrangements are examined. Particular attention is paid to the magnitude of and trends in bowing of the band gaps. Indium composition fluctuation (clustering) is simulated by different distributions of In atoms and it is shown that it strongly influences the band gaps. The gaps are considerably...

  9. A Hydrogen-Deuterium Exchange Study on Nickel-based Binary-Ternary Amorphous and Crystalline Membranes

    Science.gov (United States)

    Adibhatla, Anasuya

    to determine the heat of hydrogen absorption and desorption on the alloy surface. Electrochemical Impedance Spectroscopy was conducted on the membranes to determine the surface resistance and it was found that Ni64Zr36 as-spun ribbon displayed highest resistance while Ni60Ta20Zr20 showed lowest resistance. Absorption studies on Ni60V 40 binary alloy and Ni60V20Zr20 ternary alloy indicated that the addition of Zr to these non-coated alloys increased the hydrogen solubility in the bulk. SEM and TEM analyses showed the presence of possible nano crystalline phases in Ni64Zr36 membrane. XRD and SEM studies conducted on post treated samples showed the possible phase segregation of Ni and ZrO2. Ni60Nb40 did not show any phase transformations after hydrogen heat treated unlike its ternary composition, Ni60Nb20Zr20. It is noteworthy to mention that bubbles were observed during SEM on Ni 64Zr36 post-treated sample on the surface due to possible hydrogen trapping and subsequent release of hydrogen gas.

  10. Development of Combinatorial Methods for Alloy Design and Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Pharr, George M.; George, Easo P.; Santella, Michael L

    2005-07-01

    The primary goal of this research was to develop a comprehensive methodology for designing and optimizing metallic alloys by combinatorial principles. Because conventional techniques for alloy preparation are unavoidably restrictive in the range of alloy composition that can be examined, combinatorial methods promise to significantly reduce the time, energy, and expense needed for alloy design. Combinatorial methods can be developed not only to optimize existing alloys, but to explore and develop new ones as well. The scientific approach involved fabricating an alloy specimen with a continuous distribution of binary and ternary alloy compositions across its surface--an ''alloy library''--and then using spatially resolved probing techniques to characterize its structure, composition, and relevant properties. The three specific objectives of the project were: (1) to devise means by which simple test specimens with a library of alloy compositions spanning the range interest can be produced; (2) to assess how well the properties of the combinatorial specimen reproduce those of the conventionally processed alloys; and (3) to devise screening tools which can be used to rapidly assess the important properties of the alloys. As proof of principle, the methodology was applied to the Fe-Ni-Cr ternary alloy system that constitutes many commercially important materials such as stainless steels and the H-series and C-series heat and corrosion resistant casting alloys. Three different techniques were developed for making alloy libraries: (1) vapor deposition of discrete thin films on an appropriate substrate and then alloying them together by solid-state diffusion; (2) co-deposition of the alloying elements from three separate magnetron sputtering sources onto an inert substrate; and (3) localized melting of thin films with a focused electron-beam welding system. Each of the techniques was found to have its own advantages and disadvantages. A new and very

  11. Thermodynamic calculations in ternary titanium–aluminium–manganese system

    Directory of Open Access Journals (Sweden)

    ANA I. KOSTOV

    2008-04-01

    Full Text Available Thermodynamic calculations in the ternary Ti–Al–Mn system are shown in this paper. The thermodynamic calculations were performed using the FactSage thermochemical software and database, with the aim of determining thermodynamic properties, such as activities, coefficient of activities, partial and integral values of the enthalpies and Gibbs energies of mixing and excess energies at two different temperatures: 2000 and 2100 K. Bearing in mind that no experimental data for the Ti–Al–Mn ternary system have been obtained or reported. The obtained results represent a good base for further thermodynamic analysis and may be useful as a comparison with some future critical experimental results and thermodynamic optimization of this system.

  12. A New Multifunctional Sensor for Measuring Concentrations of Ternary Solution

    Science.gov (United States)

    Wei, Guo; Shida, Katsunori

    This paper presents a multifunctional sensor with novel structure, which is capable of directly sensing temperature and two physical parameters of solutions, namely ultrasonic velocity and conductivity. By combined measurement of these three measurable parameters, the concentrations of various components in a ternary solution can be simultaneously determined. The structure and operation principle of the sensor are described, and a regression algorithm based on natural cubic spline interpolation and the least square method is adopted to estimate the concentrations. The performances of the proposed sensor are experimentally tested by the use of ternary aqueous solution of sodium chloride and sucrose, which is widely involved in food and beverage industries. This sensor could prove valuable as a process control sensor in industry fields.

  13. Cohesion energy calculations for ternary ionic novel crystals

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez P, G.; Cabrera, E. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, A.P. 20-364, 01000 Mexico D.F. (Mexico); Mijangos, R.R. [Centro de Investigacion en Fisica, Universidad de Sonora, A.P. 5-88, 83190 Hermosillo, Sonora (Mexico); Valdez, E. [Escuela Nacional de Estudios Profesionales Acatlan, Universidad Nacional Autonoma de Mexico, Santa Cruz Acatlan, Naucalpan (Mexico); Duarte, C. [Departamento de Geologia, Universidad de Sonora, 83000 Hermosillo, Sonora (Mexico)

    2001-07-01

    The present work calculates the value of the link energy of a crystalline ternary structure newly formed by alkali halides. The ternary structure prepared with different concentrations of KCl{sub x}KBrRbCl{sub 2} maintains a very good miscibility and stability. The calculation is based on the use of a generalization of the Vegard law (which generally is valid for binary compounds) for calculating the values of the lattice constant and the repulsive m exponent. The value of the lattice parameter given by X-ray diffractometry agrees with the close approximation of the calculated value of the method used. It also compares the value of energy cohesion obtained by the Born expression with more complex approximations. (Author)

  14. Optical Properties of Silver Aluminium Sulphide Ternary Thin Films ...

    African Journals Online (AJOL)

    Ternary thin films of Silver Aluminium Sulphide (AgAlS2) have been prepared by chemical bath deposition techniques. Aqueous solution of 41.5 mls containing AgNO3, Al2(SO4)3, thiourea and EDTA was used, where AgNO3, Al2(SO4)3, thiourea were the source of Ag+, Al+ and S- respectively and EDTA was used as a ...

  15. Evaluation of Griseofulvin Binary and Ternary Solid Dispersions with HPMCAS

    OpenAIRE

    Al-Obaidi, Hisham; Buckton, Graham

    2009-01-01

    The stability and dissolution properties of griseofulvin binary and ternary solid dispersions were evaluated. Solid dispersions of griseofulvin and hydroxypropyl methylcellulose acetate succinate (HPMCAS) were prepared using the spray drying method. A third polymer, poly[N-(2-hydroxypropyl)methacrylate] (PHPMA), was incorporated to investigate its effect on the interaction of griseofulvin with HPMCAS. In this case, HPMCAS can form H bonds with griseofulvin directly; the addition of PHPMA to t...

  16. Some new quasi-twisted ternary linear codes

    Directory of Open Access Journals (Sweden)

    Rumen Daskalov

    2015-09-01

    Full Text Available Let [n, k, d]_q code be a linear code of length n, dimension k and minimum Hamming distance d over GF(q. One of the basic and most important problems in coding theory is to construct codes with best possible minimum distances. In this paper seven quasi-twisted ternary linear codes are constructed. These codes are new and improve the best known lower bounds on the minimum distance in [6].

  17. Theoretical prediction of topological insulator in ternary rare earth chalcogenides

    OpenAIRE

    Yan, Binghai; Zhang, Hai-Jun; Liu, Chao-Xing; Qi, Xiao-Liang; Frauenheim, Thomas; Zhang, Shou-Cheng

    2010-01-01

    A new class of three-dimensional topological insulator, ternary rare earth chalcogenides, is theoretically investigated with ab initio calculations. Based on both bulk band structure analysis and the direct calculation of topological surface states, we demonstrate that LaBiTe3 is a topological insulator. La can be substituted by other rare earth elements, which provide candidates for novel topological states such as quantum anomalous Hall insulator, axionic insulator and topological Kondo ins...

  18. Optical critical points of Si x Ge1‑x‑y Sn y alloys with high Si content

    Science.gov (United States)

    Fischer, Inga A.; Berrier, Audrey; Hornung, Florian; Oehme, Michael; Zaumseil, Peter; Capellini, Giovanni; von den Driesch, Nils; Buca, Dan; Schulze, Jörg

    2017-12-01

    We extend the analysis of optical transition energies above 1.5 eV in ternary Si x Ge1‑x‑y Sn y alloys grown by molecular beam epitaxy to a composition range in which 1‑x‑y is as low as 0.405. Simple models for transition energies assume a quadratic dependence on material content. Comparing our results to existing predictions of the transition energies based on results obtained from samples with much lower Si and Sn content, however, we find a significant disagreement between experiment and theory, indicating that the assumption of a quadratic dependence might not be valid for the entire composition range of the ternary alloy.

  19. Ternary Ag/epoxy adhesive with excellent overall performance.

    Science.gov (United States)

    Ji, Yan-Hong; Liu, Yu; Huang, Gui-Wen; Shen, Xiao-Jun; Xiao, Hong-Mei; Fu, Shao-Yun

    2015-04-22

    Excellent electrical conductivity (EC) generally conflicts with high lap shear strength (LSS) for electrically conductive adhesives (ECAs) since EC increases while LSS decreases with increasing conductive filler content. In this work, the ECAs with the excellent overall performance are developed based on the ternary hybrid of Ag microflakes (Ag-MFs), Ag nanospheres (Ag-NSs), and Ag nanowires (Ag-NWs). First, a low silver content adhesive system is determined. Then, the effects of the relative contents of Ag fillers on the EC and the LSS are studied. It is shown that a small amount of Ag-NSs or Ag-NWs can dramatically improve the EC for the Ag-MF/epoxy adhesives. The Ag-NSs and Ag-NWs with appropriate contents have a synergistic effect in improving the EC. Meanwhile, the LSS of the as-prepared adhesive with the appropriate Ag contents reaches an optimal value. Both the EC and the LSS of the as-prepared ternary hybrid ECA with a low content of 40 wt % Ag are higher than those of the commercial ECAs filled with the Ag-MF content over 60 wt %. Finally, the ternary hybrid ECA with the optimal formulation is shown to be promising for printing the radio frequency identification tag antennas as an immediate application example.

  20. Valence band electronic structure of Pd based ternary chalcogenide superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Lohani, H. [Institute of Physics, Sachivalaya Marg, Bhubaneswar 751005 (India); Homi Bhabha National Institute, Training School Complex, Anushakti Nagar, Mumbai 400085 (India); Mishra, P. [Institute of Physics, Sachivalaya Marg, Bhubaneswar 751005 (India); Goyal, R.; Awana, V.P.S. [National Physical Laboratory(CSIR), Dr. K. S. Krishnan Road, New Delhi 110012 (India); Sekhar, B.R., E-mail: sekhar@iopb.res.in [Institute of Physics, Sachivalaya Marg, Bhubaneswar 751005 (India); Homi Bhabha National Institute, Training School Complex, Anushakti Nagar, Mumbai 400085 (India)

    2016-12-15

    Highlights: • VB Photoemission study and DFT calculations on Pd based ternary superconductors are presented. • Nb{sub 2}Pd{sub 0.95}S{sub 5} shows a temperature dependent pseudogap. • VB spectral features of ternary superconductors are correlated to their structural geometry. - Abstract: We present a comparative study of the valence band electronic structure of Pd based ternary chalcogenide superconductors Nb{sub 2}Pd{sub 0.95}S{sub 5}, Ta{sub 2}Pd{sub 0.97}S{sub 6} and Ta{sub 2}Pd{sub 0.97}Te{sub 6} using experimental photoemission spectroscopy and density functional based theoretical calculations. We observe a qualitatively similarity between valence band (VB) spectra of Nb{sub 2}Pd{sub 0.95}S{sub 5} and Ta{sub 2}Pd{sub 0.97}S{sub 6}. Further, we find a pseudogap feature in Nb{sub 2}Pd{sub 0.95}S{sub 5} at low temperature, unlike other two compounds. We have correlated the structural geometry with the differences in VB spectra of these compounds. The different atomic packing in these compounds could vary the strength of inter-orbital hybridization among various atoms which leads to difference in their electronic structure as clearly observed in our DOS calculations.

  1. Realizing Ternary Logic in FPGAs for SWL DSP Systems

    Directory of Open Access Journals (Sweden)

    Tayeb Din

    2013-07-01

    Full Text Available Recently SWL (Short Word Length DSP (Digital Signal Processing applications has been proposed to overcome multiplier complexity that is evident in most of the digital applications. These SWL applications have been processed through sigma-delta modulation as a key element. For such applications, adder design plays vital role and can impact upon the chip area and its performance. In this paper, a ternary approach for adder tree has been proposed instead of binary that can accommodate more data with less chip-area at the cost of extra pin. The proposed ternary adder tree has been designed and developed in Quartus-II using three different design strategies namely T-gate (Ternary gate, LUT (Look Up Table and algebraic equations. Through rigorous simulation it was found that T-gate technique results in superior performance, an average of 23.5 and 33% improvement compared to the same adder structure based on Boolean Algebraic Equation and LUT, respectively. The proposed adder design would benefit the efficient implementation of SWL applications.

  2. Rhenium alloying of tungsten heavy alloys

    Energy Technology Data Exchange (ETDEWEB)

    Bose, A.; Jerman, G.; German, R.M.

    1989-06-01

    Alloying experiments have been performed using rhenium additions to a classic 90 mass% tungsten heavy alloy. The mixed powder system was liquid phase sintered to full density at 1500/sup 0/C in 60 min. The rhenium modified alloys exhibited a smaller grain size, higher hardness, higher strength, and lower ductility than the unalloyed system. For an alloy with a composition of 84W-6Re-8Ni-2Fe, the sintered density was 17,4 Mg/m/sup 3/ with a yield strength of 815 MPa, tensile strength of 1180 MPa, and elongation to failure of 13%. This property combination results from the aggregate effects of grain size reduction and solid solution hardening due to rhenium. In the unalloyed system these properties require post-sintering swaging and aging; thus, alloying with rhenium is most attractive for applications where netshaping is desired, such as by powder injection molding. (orig.).

  3. Rhenium alloying of tungsten heavy alloys

    Energy Technology Data Exchange (ETDEWEB)

    German, R.M.; Bose, A.; Jerman, G.

    1989-01-01

    Alloying experiments were performed using rhenium additions to a classic 90 mass % tungsten heavy alloy. The mixed-powder system was liquid phase sintered to full density at 1500 C in 60 min The rhenium-modified alloys exhibited a smaller grain size, higher hardness, higher strength, and lower ductility than the unalloyed system. For an alloy with a composition of 84W-6Re-8Ni-2Fe, the sintered density was 17, 4 Mg/m{sup 3} with a yield strength of 815 MPa, tensile strength of 1180 MPa, and elongation to failure of 13%. This property combination results from the aggregate effects of grain size reduction and solid solution hardening due to rhenium. In the unalloyed system these properties require post-sintering swaging and aging; thus, alloying with rhenium is most attractive for applications where net shaping is desired, such as by powder injection molding.

  4. Nickel alloys development-Inconel alloys development

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yong Soo; Uhm, Tae Sik; Kim, Taek Jun; Jeon, Yu Taek; Chang, Hyun Young [Yonsei University, Seoul (Korea, Republic of); Kim, Young Sik [Andong National University, Andon (Korea, Republic of)

    1996-07-01

    This report dealt with the evaluation of Alloy 600 and alloy 690 of steam= generator materials. The experimental alloys were divided into two groups. ; Seamless tubings made by different ingot, and Mo-modified alloys. Thermal treatment had no influenced on the anodic polarization resistance in some caustic solution, but improved stress corrosion resistance by CERT. The effect of SO{sub 4}{sup =} ions reduced markedly caustic SCC resistance. The corrosion mode by 70 days and 120 days C-ring tests revealed the intergranular corrosion instead of stress corrosion cracking. Mo addition on the corrosion resistance of Alloy 690M showed beneficial effect in neutral and acidic solutions, but a little effect in caustic solutions. However, the caustic stress corrosion resistance was improved by the addition of molybdenum. 27 refs., 84 figs., 5 tabs. (author)

  5. Fusion and characterization of an alloy Cu-Zn-Al-Ni of nuclear interest; Fusion y caracterizacion de una aleacion Cu-Zn-Al-Ni de interes nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Santana M, J.S

    2003-07-01

    The present work is the result of the study of a non ferrous quatenary alloy of Cu-Zn-Al-Ni (Foundry 3), it was chosen of a series of alloys to obtain so much information of its microstructural properties like mechanical, evaluating them and comparing them with the previously obtained ternary alloys of Cu-AI-Ni (Foundry 1) and Cu-Zn-AI (Foundry 2) identified as alloys of memory effect and superalloys. These were carried out starting from the foundry of their pure elements of Cu, Zn, Al, Ni. When physically having the ingot of each alloy, different techniques were used for their characterization. The used techniques were through the metallographic analysis, by scanning electron microscopy (SEM), X-ray dispersive energy spectroscopy (EDS), X-ray diffraction (XRD), mechanical essays and Rockwell hardness. The non ferrous quaternary alloy Cu-Zn-AI-Ni by means of the metallographic analysis didn't show significant differences in their three sections (superficial, longitudinal and transverse) since result an homogeneous alloy at the same that the both ternaries. The grain size of the quaternary alloy is the finest while the ternary alloy of Cu-AI-Ni is the one that obtained the biggest grain size. Through MEB together with the analysis by EDS and the mapping of the elements that constitute each alloy, show that the three foundries were alloyed, moreover the presence of aggregates was also observed in the Foundries 2 and 3. These results by means of the analysis of XRD corroborate that these alloys have more of two elements. Relating the microstructural properties with those mechanical show us that as minor was the grain size, better they were his mechanical properties, in this case that of the quaternary alloy. With regard to the test of Rockwell hardness the Foundry 1 were the softest with the temper treatment, while that the Foundries 2 and 3 were the hardest with this same treatment, being still harder the Foundry 2 but with very little difference, for what great

  6. Design of high density gamma-phase uranium alloys for LEU dispersion fuel applications.

    Energy Technology Data Exchange (ETDEWEB)

    Hofman, G. L.

    1998-10-19

    Uranium alloys are candidates for the fuel phase in aluminum matrix dispersion fuels requiring high uranium loading. Certain uranium alloys have been shown to have good irradiation performance at intermediate burnup. Previous studies have shown that acceptable fission gas swelling behavior and fuel-aluminum interaction is possible only if the fuel alloy can be maintained in the high temperature body-centered-cubic {gamma}-phase during fabrication and irradiation, i.e., at temperatures at which {alpha}-U is the equilibrium phase. Transition metals in Groups V through VIII are known to allow metastable retention of the gamma phase below the equilibrium isotherm. These metals have varying degrees of effectiveness in stabilizing the gamma phase. Certain alloys are metastable for very long times at the relatively low fuel temperatures seen in research reactor operation. In this paper, the existing data on the gamma stability of binary and ternary uranium alloys is analyzed. The mechanism and kinetics of decomposition of the gamma phase are assessed with the help of metal alloy theory. Alloys with the highest possible uranium content, good gamma-phase stability, and good neutronic performance are identified for further metallurgical studies and irradiation tests. Results from theory will be compared with experimentally generated data.

  7. Neural network potential for Al-Mg-Si alloys

    Science.gov (United States)

    Kobayashi, Ryo; Giofré, Daniele; Junge, Till; Ceriotti, Michele; Curtin, William A.

    2017-10-01

    The 6000 series Al alloys, which include a few percent of Mg and Si, are important in automotive and aviation industries because of their low weight, as compared to steels, and the fact their strength can be greatly improved through engineered precipitation. To enable atomistic-level simulations of both the processing and performance of this important alloy system, a neural network (NN) potential for the ternary Al-Mg-Si has been created. Training of the NN uses an extensive database of properties computed using first-principles density functional theory, including complex precipitate phases in this alloy. The NN potential accurately reproduces most of the pure Al properties relevant to the mechanical behavior as well as heat of solution, solute-solute, and solute-vacancy interaction energies, and formation energies of small solute clusters and precipitates that are required for modeling the early stage of precipitation and mechanical strengthening. This success not only enables future detailed studies of Al-Mg-Si but also highlights the ability of NN methods to generate useful potentials in complex alloy systems.

  8. High strength alloys

    Energy Technology Data Exchange (ETDEWEB)

    Maziasz, Phillip James; Shingledecker, John Paul; Santella, Michael Leonard; Schneibel, Joachim Hugo; Sikka, Vinod Kumar; Vinegar, Harold J.; John, Randy Carl; Kim, Dong Sub

    2012-06-05

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tublar that is at least partially made from a material containing at least one of the metal alloys.

  9. High strength alloys

    Energy Technology Data Exchange (ETDEWEB)

    Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

    2010-08-31

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

  10. Information on individual interfaces in ternary polymer blends from positron annihilation lifetime studies

    Science.gov (United States)

    Meghala, D.; Ramya, P.; Pasang, T.; Ravikumar, H. B.; Ranganathaiah, C.

    2012-06-01

    Positron Annihilation Lifetime Spectroscopy has been used to determine the free volume content in the ternary blends of SAN/EVA/PVC. The method of deriving hydrodynamic interaction parameter (α) in binary polymer blends was modified for ternary polymer blend system characterized by three distinct interfaces. Each interface characterized, is associated with an α and its assertion for the ternary blend are compared with available literature data.

  11. Development of a high density fuel based on uranium-molybdenum alloys with high compatibility in high temperatures; Desenvolvimento de um combustivel de alta densidade a base das ligas uranio-molibdenio com alta compatibilidade em altas temperaturas

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Fabio Branco Vaz de

    2008-07-01

    This work has as its objective the development of a high density and low enriched nuclear fuel based on the gamma-UMo alloys, for utilization where it is necessary satisfactory behavior in high temperatures, considering its utilization as dispersion. For its accomplishment, it was started from the analysis of the RERTR ('Reduced Enrichment for Research and Test Reactors') results and some theoretical works involving the fabrication of gamma-uranium metastable alloys. A ternary addition is proposed, supported by the properties of binary and ternary uranium alloys studied, having the objectives of the gamma stability enhancement and an ease to its powder fabrication. Alloys of uranium-molybdenum were prepared with 5 to 10% Mo addition, and 1 and 3% of ternary, over a gamma U7Mo binary base alloy. In all the steps of its preparation, the alloys were characterized with the traditional techniques, to the determination of its mechanical and structural properties. To provide a process for the alloys powder obtention, its behavior under hydrogen atmosphere were studied, in thermo analyser-thermo gravimeter equipment. Temperatures varied from the ambient up to 1000 deg C, and times from 15 minutes to 16 hours. The results validation were made in a semi-pilot scale, where 10 to 50 g of powders of some of the alloys studied were prepared, under static hydrogen atmosphere. Compatibility studies were conducted by the exposure of the alloys under oxygen and aluminum, to the verification of possible reactions by means of differential thermal analysis. The alloys were exposed to a constant heat up to 1000 deg C, and their performances were evaluated in terms of their reaction resistance. On the basis of the results, it was observed that ternary additions increases the temperatures of the reaction with aluminum and oxidation, in comparison with the gamma UMo binaries. A set of conditions to the hydration of the alloys were defined, more restrictive in terms of temperature

  12. Creep Resistant Zinc Alloy

    Energy Technology Data Exchange (ETDEWEB)

    Frank E. Goodwin

    2002-12-31

    This report covers the development of Hot Chamber Die Castable Zinc Alloys with High Creep Strengths. This project commenced in 2000, with the primary objective of developing a hot chamber zinc die-casting alloy, capable of satisfactory service at 140 C. The core objectives of the development program were to: (1) fill in missing alloy data areas and develop a more complete empirical model of the influence of alloy composition on creep strength and other selected properties, and (2) based on the results from this model, examine promising alloy composition areas, for further development and for meeting the property combination targets, with the view to designing an optimized alloy composition. The target properties identified by ILZRO for an improved creep resistant zinc die-casting alloy were identified as follows: (1) temperature capability of 1470 C; (2) creep stress of 31 MPa (4500 psi); (3) exposure time of 1000 hours; and (4) maximum creep elongation under these conditions of 1%. The project was broadly divided into three tasks: (1) Task 1--General and Modeling, covering Experimental design of a first batch of alloys, alloy preparation and characterization. (2) Task 2--Refinement and Optimization, covering Experimental design of a second batch of alloys. (3) Task 3--Creep Testing and Technology transfer, covering the finalization of testing and the transfer of technology to the Zinc industry should have at least one improved alloy result from this work.

  13. Biocompatibility of dental alloys

    Energy Technology Data Exchange (ETDEWEB)

    Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)

    2001-10-01

    Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)

  14. Microstructural development during solidification of stainless steel alloys

    Science.gov (United States)

    Elmer, J. W.; Allen, S. M.; Eagar, T. W.

    1989-10-01

    The microstructures that develop during the solidification of stainless steel alloys are related to the solidification conditions and the specific alloy composition. The solidification conditions are determined by the processing method, i.e., casting, welding, or rapid solidification, and by parametric variations within each of these techniques. One variable that has been used to characterize the effects of different processing conditions is the cooling rate. This factor and the chemical composition of the alloy both influence (1) the primary mode of solidification, (2) solute redistribution and second-phase formation during solidification, and (3) the nucleation and growth behavior of the ferrite-to-austenite phase transformation during cooling. Consequently, the residual ferrite content and the microstructural morphology depend on the cooling rate and are governed by the solidification process. This paper investigates the influence of cooling rate on the microstructure of stainless steel alloys and describes the conditions that lead to the many microstructural morphologies that develop during solidification. Experiments were performed on a series of seven high-purity Fe-Ni-Cr alloys that spanned the line of twofold saturation along the 59 wt pct Fe isopleth of the ternary alloy system. High-speed electron-beam surface-glazing was used to melt and resolidify these alloys at scan speeds up to 5 m/s. The resulting cooling rates were shown to vary from 7°C/s to 7.5×106°C/s, and the resolidified melts were analyzed by optical metallographic methods. Five primary modes of solidification and 12 microstructural morphologies were characterized in the resolidified alloys, and these features appear to be a complete “set” of the possible microstructures for 300-series stainless steel alloys. The results of this study were used to create electron-beam scan speed vs composition diagrams, which can be used to predict the primary mode of solidification and the

  15. Liquid-liquid equilibria for binary and ternary polymer solutions with PC-SAFT

    DEFF Research Database (Denmark)

    Lindvig, Thomas; Michelsen, Michael Locht; Kontogeorgis, Georgios

    2004-01-01

    are used for investigating the correlative and predictive capabilities of the thermodynamic model PC-SAFT. The investigation shows that the model correlates well experimental LLE data for binary as well as ternary systems but further predicts the behavior of the ternary systems with reasonably good......Two algorithms for evaluating liquid-liquid equilibria (LLE) for binary and ternary polymer solutions are presented. The binary algorithm provides the temperature versus concentration cloud-point curve at fixed pressure, whereas the ternary algorithm provides component 1 versus component 2...

  16. Computational thermodynamics aided design of novel ferritic alloys

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ying [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chen, Tianyi [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tan, Lizhen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-06-30

    With the aid of computational thermodynamics, Ni was identified to suppress the liquidus temperature of Fe2Zr and four Fe-Cr-Ni-Zr alloys were designed to study the Ni effect on the phase stability of Fe2Zr laves_phase. These alloys were fabricated through traditional arc-metling, followed by annealing at 1000 C for 336 hours and 700 C for 1275 hours. The microstructure were examined and characterized by SEM BSE image, EDS compositional mapping and point scan, XRD and TEM analysis. The major results were summarized below: 1)For investigated alloys with 12wt% Cr, 3~6wt% Zr and 3~9 wt%Ni, the phases in equilibrium with the BCC phase are C15_Laves phase, Fe23Zr6 phase. The volume fraction of intermetallic phases increases with Ni and Zr contents. 2)Instead of (Fe,Cr)2Zr C14_Laves phase, Ni stabilizes the C15_Laves structure in Fe-Cr-Ni-Zr alloys by substituting Fe and Cr atoms with Ni atoms in the first sublattice. 3)Fe23Zr6, that is metastable in the Fe-Cr-Zr ternary, is also stabilized by Ni addition. 4)Ni7Zr2 phase was observed in samples with high Ni/Zr ratio. Extensive solubility of Fe was identified in the phase. The microstructural and composition results obtained from this study will be incorportated into the the Fe-Cr-Ni-Zr database. The current samples will be subjected to ion irradiaition to be compared with those results for Fe-Cr-Zr alloys. Additional alloys will be designed to form (Fe,Cr,Ni)2Zr nanoprecipitates for further studies.

  17. Temperature dependence of the photoluminescence polarization of ordered III-V semiconductor alloys

    Energy Technology Data Exchange (ETDEWEB)

    Prutskij, T.; Makarov, N. [Instituto de Ciencias, BUAP, Privada 17 Norte, No 3417, col. San Miguel Huyeotlipan, 72050 Puebla, Pue. (Mexico); Attolini, G. [IMEM/CNR, Parco Area delle Scienze 37/A, 43010 Parma (Italy)

    2016-03-21

    We studied the linear polarization of the photoluminescence (PL) emission of atomically ordered GaInAsP and GaInP alloys with different ordering parameters in the temperature range from 10 to 300 K. The epitaxial layers of these alloys were grown on GaAs and Ge (001) substrates by metal organic vapor phase epitaxy. The polarization of the PL emission propagating along different crystallographic axes depends on the value of biaxial strain in the layer and changes with temperature. We calculated the PL polarization patterns for different propagation directions as a function of biaxial strain using an existing model developed for ternary atomically ordered III-V alloys. Comparing the calculated PL polarization patterns with those obtained experimentally, we separated the variation of the PL polarization due to change of biaxial strain with temperature.

  18. Mg amorphous alloys for biodegradable implants; Ligas amorfas de magnesio utilizadas em implantes consumiveis

    Energy Technology Data Exchange (ETDEWEB)

    Danez, G.P., E-mail: gabidanez@hotmail.co [Universidade Federal de Sao Carlos (PPG-CEMUFSCar), SP (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Koga, G.Y.; Tonucci, S.; Bolfarini, C.; Kiminami, C.S.; Botta Filho, W.J. [Universidade Federal de Sao Carlos (DEMa/UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    The use of implants made from amorphous alloys magnesium-based with additions of zinc and calcium are promising. Properties such as biocompatibility, low density, high mechanical strength, low modulus (as compared to alloys such as stainless steel and titanium), corrosion resistance and wear resistance make it attractive for use in implants. Moreover, the by-products of corrosion and wear are not toxic and may contribute to fixation. Aiming to understand the tendency of this amorphous ternary (Mg-Zn-Ca) and expand the information about this system, this work involved the use of the topological criterion of instability ({lambda}) and the criterion of electronegativity ({Delta}e) to the choice of compositions. The alloys were processed into wedge-shaped and analyzed structurally and in X-ray diffraction and scanning electron microscopy. (author)

  19. Corrosion behavior in high-temperature pressurized water of Zircaloy-4 joints brazed with Zr-Cu-based amorphous filler alloys

    Science.gov (United States)

    Lee, Jung Gu; Lee, Gyoung-Ja; Park, Jin-Ju; Lee, Min-Ku

    2017-05-01

    The compositional effects of ternary Zr-Cu-X (X: Al, Fe) amorphous filler alloys on galvanic corrosion susceptibility in high-temperature pressurized water were investigated for Zircaloy-4 brazed joints. Through an Al-induced microgalvanic reaction that deteriorated the overall nobility of the joint, application of the Zr-Cu-Al filler alloy caused galvanic coupling to develop readily between the Al-bearing joint and the Al-free base metal, finally leading to massive localized corrosion of the joint. Contrastingly, joints prepared with a Zr-Cu-Fe filler alloy showed excellent corrosion resistance comparable to that of the Zircaloy-4 base metal, since the Cu and Fe elements forming fine intermetallic particles with Zr did not influence the electrochemical stability of the resultant joints. The present results demonstrate that Fe is a more suitable alloying element than Al for brazing filler alloys subjected to high-temperature corrosive environments.

  20. Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure

    Science.gov (United States)

    Pandey, P.; Kashyap, S.; Tiwary, C. S.; Chattopadhyay, K.

    2017-12-01

    Aiming to develop high-strength Al-based alloys with high material index (strength/density) for structural application, this article reports a new class of multiphase Al alloys in the Al-Ni-Cr system that possess impressive room temperature and elevated temperature (≥ 200 °C) mechanical properties. The ternary eutectic and near eutectic alloys display a complex microstructure containing intermetallic phases displaying hierarchically arranged plate and rod morphologies that exhibit extraordinary mechanical properties. The yield strengths achieved at room temperatures are in excess of 350 MPa with compressive plastic strains of more than 30 pct (without fracturing) for these alloys. The stability of the complex microstructure also leads to a yield stress of 191 ± 8 to 232 ± 5 MPa at 250 °C. It is argued that the alloys derive their high strength and impressive plasticity through synergic effects of refined nanoeutectics of two different morphologies forming a core shell type of architecture.

  1. Lanthanum nickel aluminum alloy

    Science.gov (United States)

    Gruen, Dieter M.; Mendelsohn, Marshall H.; Dwight, Austin E.

    1979-01-01

    A ternary intermetallic compound capable of reversible sorption of hydrogen having the chemical formula LaNi.sub.5-x Al.sub.x, where x is in the range of about 0.01 to 1.5 and the method of storing hydrogen using the intermetallic compound.

  2. Atomistic Method Applied to Computational Modeling of Surface Alloys

    Science.gov (United States)

    Bozzolo, Guillermo H.; Abel, Phillip B.

    2000-01-01

    The formation of surface alloys is a growing research field that, in terms of the surface structure of multicomponent systems, defines the frontier both for experimental and theoretical techniques. Because of the impact that the formation of surface alloys has on surface properties, researchers need reliable methods to predict new surface alloys and to help interpret unknown structures. The structure of surface alloys and when, and even if, they form are largely unpredictable from the known properties of the participating elements. No unified theory or model to date can infer surface alloy structures from the constituents properties or their bulk alloy characteristics. In spite of these severe limitations, a growing catalogue of such systems has been developed during the last decade, and only recently are global theories being advanced to fully understand the phenomenon. None of the methods used in other areas of surface science can properly model even the already known cases. Aware of these limitations, the Computational Materials Group at the NASA Glenn Research Center at Lewis Field has developed a useful, computationally economical, and physically sound methodology to enable the systematic study of surface alloy formation in metals. This tool has been tested successfully on several known systems for which hard experimental evidence exists and has been used to predict ternary surface alloy formation (results to be published: Garces, J.E.; Bozzolo, G.; and Mosca, H.: Atomistic Modeling of Pd/Cu(100) Surface Alloy Formation. Surf. Sci., 2000 (in press); Mosca, H.; Garces J.E.; and Bozzolo, G.: Surface Ternary Alloys of (Cu,Au)/Ni(110). (Accepted for publication in Surf. Sci., 2000.); and Garces, J.E.; Bozzolo, G.; Mosca, H.; and Abel, P.: A New Approach for Atomistic Modeling of Pd/Cu(110) Surface Alloy Formation. (Submitted to Appl. Surf. Sci.)). Ternary alloy formation is a field yet to be fully explored experimentally. The computational tool, which is based on

  3. The Lattice Compatibility Theory: Arguments for Recorded I-III-O2 Ternary Oxide Ceramics Instability at Low Temperatures beside Ternary Telluride and Sulphide Ceramics

    Directory of Open Access Journals (Sweden)

    K. Boubaker

    2013-01-01

    Full Text Available Some recorded behaviours differences between chalcopyrite ternary oxide ceramics and telluride and sulphides are investigated in the framework of the recently proposed Lattice Compatibility Theory (LCT. Alterations have been evaluated in terms of Urbach tailing and atomic valence shell electrons orbital eigenvalues, which were calculated through several approximations. The aim of the study was mainly an attempt to explain the intriguing problem of difficulties of elaborating chalcopyrite ternary oxide ceramics (I-III-O2 at relatively low temperatures under conditions which allowed crystallization of ternary telluride and sulphides.

  4. The Effect of Sb Addition on Sn-Based Alloys for High-Temperature Lead-Free Solders: an Investigation of the Ag-Sb-Sn System

    Science.gov (United States)

    Li, D.; Delsante, S.; Watson, A.; Borzone, G.

    2012-01-01

    Today there is renewed interest in alloys belonging to the Sb-Sn-X (X = Cu, Ag, Bi) ternary systems and their phase equilibria, phase transformations, and thermodynamic properties because of their possible use as high-temperature lead-free solders in the electronics industry. The integral mixing enthalpy of Ag-Sb-Sn liquid alloys has been measured along five different sections (Ag0.25Sn0.75, Ag0.50Sn0.50, Sb0.30Sn0.70, Sb0.50Sn0.50, and Sb0.70Sn0.30) at 530°C, 600°C, and 630°C, using a high-temperature Calvet calorimeter by dropping pure elements (Ag or Sb) in the binary alloy liquid bath. The ternary extrapolation models of Muggianu and Toop were used to calculate the integral enthalpy of mixing and to compare measured and extrapolated values. Selected ternary alloys have been prepared for thermal investigation by using a differential scanning calorimeter at different heating/cooling rates in order to clarify the temperature of the invariant reactions and the crystallization path.

  5. In Situ Synthesis of Al-Si-Cu Alloy During Brazing Process and Mechanical Property of Brazing Joint

    Directory of Open Access Journals (Sweden)

    LONG Wei-min

    2016-06-01

    Full Text Available The Al-Si-Cu alloy system is considered to be a promising choice of filler metal for aluminium alloys brazing due to its high strength and low melting point. The greatest obstacle is its lack of plastic forming ability and being difficult to be processed by conventional methods. This disadvantage is ascribed to the considerable amount of brittle CuAl2 intermetallic compound which forms when alloy composition is around the ternary eutectic point. In order to overcome this deficiency, authors of this article proposed to synthesize Al-Si-Cu filler metal by using in situ synthesis method, and the structure and properties of brazing joints were studied. The results show that AlSi alloy is used as the wrap layer, and CuAl alloy is used as the powder core in the composite brazing wire, the two alloys have similar melting points. The machinability of the composite brazing wire is much superior to the traditional Al-Si-Cu filler metal. During the induction brazing of 3A21 alloy, when using AlSi-CuAl composite filler wire, AlSi and CuAl alloys melt almost simultaneously, then after short time holding, Al-Si-Cu braze filler is obtained, the brazing seam has uniform composition and good bonding interface, also, the shearing strength of the brazing joints is higher than the joint brazed by conventional Al-Si-Cu filler metal.

  6. Crystal Growth of Ternary Compound Semiconductors in Low Gravity Environment

    Science.gov (United States)

    Su, Ching-Hua

    2014-01-01

    A low gravity material experiment will be performed in the Material Science Research Rack (MSRR) on International Space Station (ISS). There are two sections of the flight experiment: (I) crystal growth of ZnSe and related ternary compounds, such as ZnSeS and ZnSeTe, by physical vapor transport (PVT) and (II) melt growth of CdZnTe by directional solidification. The main objective of the project is to determine the relative contributions of gravity-driven fluid flows to the compositional distribution, incorporation of impurities and defects, and deviation from stoichiometry observed in the grown crystals as results of buoyancy-driven convection and growth interface fluctuations caused by irregular fluid-flows on Earth. The investigation consists of extensive ground-based experimental and theoretical research efforts and concurrent flight experimentation. This talk will focus on the ground-based studies on the PVT crystal growth of ZnSe and related ternary compounds. The objectives of the ground-based studies are (1) obtain the experimental data and conduct the analyses required to define the optimum growth parameters for the flight experiments, (2) perfect various characterization techniques to establish the standard procedure for material characterization, (3) quantitatively establish the characteristics of the crystals grown on Earth as a basis for subsequent comparative evaluations of the crystals grown in a low-gravity environment and (4) develop theoretical and analytical methods required for such evaluations. ZnSe and related ternary compounds have been grown by vapor transport technique with real time in-situ non-invasive monitoring techniques. The grown crystals have been characterized extensively by various techniques to correlate the grown crystal properties with the growth conditions.

  7. Catalyst Alloys Processing

    Science.gov (United States)

    Tan, Xincai

    2014-10-01

    Catalysts are one of the key materials used for diamond formation at high pressures. Several such catalyst products have been developed and applied in China and around the world. The catalyst alloy most widely used in China is Ni70Mn25Co5 developed at Changsha Research Institute of Mining and Metallurgy. In this article, detailed techniques for manufacturing such a typical catalyst alloy will be reviewed. The characteristics of the alloy will be described. Detailed processing of the alloy will be presented, including remelting and casting, hot rolling, annealing, surface treatment, cold rolling, blanking, finishing, packaging, and waste treatment. An example use of the catalyst alloy will also be given. Industrial experience shows that for the catalyst alloy products, a vacuum induction remelt furnace can be used for remelting, a metal mold can be used for casting, hot and cold rolling can be used for forming, and acid pickling can be used for metal surface cleaning.

  8. Quantifying the energetics of cooperativity in a ternary protein complex

    DEFF Research Database (Denmark)

    Andersen, Peter S; Schuck, Peter; Sundberg, Eric J

    2002-01-01

    and mathematical modeling to describe the energetics of cooperativity in a trimolecular protein complex. As a model system for quantifying cooperativity, we studied the ternary complex formed by the simultaneous interaction of a superantigen with major histocompatibility complex and T cell receptor, for which...... a structural model is available. This system exhibits positive and negative cooperativity, as well as augmentation of the temperature dependence of binding kinetics upon the cooperative interaction of individual protein components in the complex. Our experimental and theoretical analysis may be applicable...... to other systems involving cooperativity....

  9. Implementation of DFT application on ternary optical computer

    Science.gov (United States)

    Junjie, Peng; Youyi, Fu; Xiaofeng, Zhang; Shuai, Kong; Xinyu, Wei

    2018-03-01

    As its characteristics of huge number of data bits and low energy consumption, optical computing may be used in the applications such as DFT etc. which needs a lot of computation and can be implemented in parallel. According to this, DFT implementation methods in full parallel as well as in partial parallel are presented. Based on resources ternary optical computer (TOC), extensive experiments were carried out. Experimental results show that the proposed schemes are correct and feasible. They provide a foundation for further exploration of the applications on TOC that needs a large amount calculation and can be processed in parallel.

  10. A review on ternary vanadate one-dimensional nanomaterials.

    Science.gov (United States)

    Pei, Li Z; Wang, Shuai; Liu, Han D; Pei, Yin Q

    2014-01-01

    Ternary vanadate one-dimensional nanomaterials exhibit great application potential in the fields of lithium ion batteries, photocatalysis and electrochemical sensors owing to their good electrochemical and photocatalytic properties. The article reviews the recent progress and patents on the vanadate one-dimensional nanomaterials. The synthesis of the vanadate nanorods, nanobelts and nanotubes by hydrothermal method, template method and room temperature wet chemical process is demonstrated. The application of the vanadate one-dimensional nanomaterials for lithium ion batteries, electrochemical sensors and photocatalysis is discussed. The possible development direction of the vanadate one-dimensional nanomaterials for the synthesis and application is also analyzed.

  11. Low activation ferritic alloys

    Science.gov (United States)

    Gelles, D.S.; Ghoniem, N.M.; Powell, R.W.

    1985-02-07

    Low activation ferritic alloys, specifically bainitic and martensitic stainless steels, are described for use in the production of structural components for nuclear fusion reactors. They are designed specifically to achieve low activation characteristics suitable for efficient waste disposal. The alloys essentially exclude molybdenum, nickel, nitrogen and niobium. Strength is achieved by substituting vanadium, tungsten, and/or tantalum in place of the usual molybdenum content in such alloys.

  12. Ternary System with Controlled Structure: A New Strategy toward Efficient Organic Photovoltaics.

    Science.gov (United States)

    Cheng, Pei; Wang, Rui; Zhu, Jingshuai; Huang, Wenchao; Chang, Sheng-Yung; Meng, Lei; Sun, Pengyu; Cheng, Hao-Wen; Qin, Meng; Zhu, Chenhui; Zhan, Xiaowei; Yang, Yang

    2018-02-01

    Recently, a new type of active layer with a ternary system has been developed to further enhance the performance of binary system organic photovoltaics (OPV). In the ternary OPV, almost all active layers are formed by simple ternary blend in solution, which eventually leads to the disordered bulk heterojunction (BHJ) structure after a spin-coating process. There are two main restrictions in this disordered BHJ structure to obtain higher performance OPV. One is the isolated second donor or acceptor domains. The other is the invalid metal-semiconductor contact. Herein, the concept and design of donor/acceptor/acceptor ternary OPV with more controlled structure (C-ternary) is reported. The C-ternary OPV is fabricated by a sequential solution process, in which the second acceptor and donor/acceptor binary blend are sequentially spin-coated. After the device optimization, the power conversion efficiencies (PCEs) of all OPV with C-ternary are enhanced by 14-21% relative to those with the simple ternary blend; the best PCEs are 10.7 and 11.0% for fullerene-based and fullerene-free solar cells, respectively. Moreover, the averaged PCE value of 10.4% for fullerene-free solar cell measured in this study is in great agreement with the certified one of 10.32% obtained from Newport Corporation. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Using a Ternary Diagram to Display a System's Evolving Energy Distribution

    Science.gov (United States)

    Brazzle, Bob; Tapp, Anne

    2016-01-01

    A ternary diagram is a graphical representation used for systems with three components. They are familiar to mineralogists (who typically use them to categorize varieties of solid solution minerals such as feldspar) but are not yet widely used in the physics community. Last year the lead author began using ternary diagrams in his introductory…

  14. Visible and near-infrared light emitting calix[4]arene-based ternary lanthanide complexes

    NARCIS (Netherlands)

    Hebbink, G.A.; Klink, S.I.; Oude Alink, Patrick G.B.; van Veggel, F.C.J.M.

    2001-01-01

    In this article ternary lanthanide complexes consisting of a calix[4]arene unit and dibenzoylmethane (dbm) as the antenna are described. In the europium complex [(Eu)2]NO3 two solvent molecules are still coordinated to the ion, making substitution of them by the dbm antenna possible. In the ternary

  15. INTERVAL-VALUED INTUITIONISTIC FUZZY BI-IDEALS IN TERNARY SEMIRINGS

    Directory of Open Access Journals (Sweden)

    D. KRISHNASWAMY

    2016-04-01

    Full Text Available In this paper we introduce the notions of interval-valued fuzzy bi-ideal, interval-valued anti fuzzy bi-ideal and interval-valued intuitionistic fuzzy bi-ideal in ternary semirings and some of the basic properties of these ideals are investigated. We also introduce normal interval-valued intuitionistic fuzzy ideals in ternary semirings.

  16. Ternary-fission dynamics and asymmetries in reactions with polarized neutrons

    CERN Document Server

    Bunakov, V E

    2002-01-01

    Experimental results of measuring various asymmetries of charged-particles emission in ternary fission induced by polarized neutrons, namely parity nonconserving asymmetries, left-right asymmetries and triple-odd correlations are presented. It is demonstrated what kind of new information about the mechanism of ternary fission can be obtained from their analysis

  17. Towards tailoring the magnetocaloric response in FeRh-based ternary compounds

    Energy Technology Data Exchange (ETDEWEB)

    Barua, Radhika, E-mail: barua.r@husky.neu.edu; Jiménez-Villacorta, Félix; Lewis, L. H. [Department of Chemical Engineering, Northeastern University, Boston, Massachusetts 02115 (United States)

    2014-05-07

    In this work, we demonstrate that the magnetocaloric response of FeRh-based compounds may be tailored for potential magnetic refrigeration applications by chemical modification of the FeRh lattice. Alloys of composition Fe(Rh{sub 1−x}A{sub x}) or (Fe{sub 1−x}B{sub x})Rh (A = Cu, Pd; B = Ni; 0 < x < 0.06) were synthesized via arc-melting and subsequent annealing in vacuum at 1000 °C for 48 h. The magnetocaloric properties of the FeRh-based systems were determined using isothermal M(H) curves measured in the vicinity of the magnetostructural temperature (T{sub t}). It is found that the FeRh working temperature range (δT{sub FWHM}) may be chemically tuned over a wide temperature range, 100 K ≤ T ≤ 400 K. While elemental substitution consistently decreases the magnetic entropy change (ΔS{sub mag}) of the FeRh-based ternary alloys from that of the parent FeRh compound (ΔS{sub mag},{sub FeRh} ∼ 17 J/kg K; ΔS{sub mag,FeRh-ternary =} 7–14 J/kg K at H{sub app} = 2 T), the net refrigeration capacity (RC), defined as the amount of heat that can be transferred during one magnetic refrigeration cycle, of the modified systems is significantly higher (RC{sub FeRh} ∼ 150 J/kg; RC{sub FeRh-ternary =} 170–210 J/kg at H{sub app} = 2 T). These results are attributed to stoichiometry-induced changes in the FeRh electronic band structure and beneficial broadening of the magnetostructural transition due to local chemical disorder.

  18. Mechanical characterization and structural of Mg{sub 70}Zn{sub 28}Ca{sub 2} alloy for use as bioabsorbable implants; Caracterizacao mecanica e estrutural de uma liga Mg{sub 70}Zn{sub 28}Ca{sub 2} para uso como implante bioabsorvivel

    Energy Technology Data Exchange (ETDEWEB)

    Asato, G.H.; Matias, T.B.; Kiminami, C.S.; Botta, W.J.; Bolfarini, C., E-mail: asato.hitoshi@gmail.com [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2014-07-01

    A ternary magnesium-based alloy was studied for your biocompatibility, high mechanical properties, elastic modulus close to the bone and corrosion rate less than pure magnesium. The experimental conditions enabled to process a Mg70Zn28Ca2 ternary amorphous alloy by the fusion of eutectic binary alloys (Mg-Zn and Mg-Ca), which were obtained from pure elements in a induction furnace in an argon atmosphere. The characterization of alloy involved quantitative chemical analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The results indicated that the actual composition was very close to the nominal, with the presence of amorphous up to 1.3 mm thick. The mechanical compression test was performed in the conventional cylindrical samples with a diameter of 3 mm on an Instron type machine, obtaining the compressive strength above 400 MPa. (author)

  19. Spin glass-like behavior in spin-density-wave CrCoMn alloys

    Energy Technology Data Exchange (ETDEWEB)

    Galkin, Vladimir Yu. E-mail: galkin@magn.ru; Ortiz, Wilson A.; Ali, Naushad

    2003-03-01

    Magnetic susceptibility and magnetization of spin-density-wave (SDW) alloy systems (Cr+3.2%Co){sub 1-x}Mn{sub x} and (Cr+6.5%Co){sub 1-x}Mn{sub x} have been measured with a SQUID magnetometer. Magnetic properties of the studied alloys are compared with those exhibited by binary Cr{sub 1-x}Mn{sub x} and ternary (CrFe){sub 1-x}Mn{sub x} and (CrSi){sub 1-x}Mn{sub x} alloys. All these alloys show spin glass (SG)-like behavior; however, some of their magnetic properties are quite different from those exhibited by conventional metallic spin glasses. Though both Fe and Co produce a local moment in Cr and CrMn, addition of Co to CrMn does not result in suppression of SG-like phase like that in (CrFe){sub 1-x}Mn{sub x}. This seems to be a result of essentially different strengths of Fe-Cr and Co-Cr couplings. All alloys studied show a low-temperature SG-like magnetic hysteresis. Such hysteresis is shifted to negative fields by cooling the alloys in a strong magnetic field through the Neel temperature. This effect is caused by unidirectional anisotropy of Co atoms frozen in the SDW matrix.

  20. Metal-insulator transition of alloyed radical cation salts, (MexEDO-TTF)2PF6

    Science.gov (United States)

    Murata, Tsuyoshi; Shao, Xiangfeng; Nakano, Yoshiaki; Yamochi, Hideki; Saito, Gunzi; Uruichi, Mikio; Yakushi, Kyuya; Tanaka, Koichiro

    2010-06-01

    Ternary radical cation salts containing ethylenedioxytetrathiafulvalene, its mono-methyl substituted derivative, and hexafluorophosphate, [(EDO-TTF)1-x(MeEDO-TTF)x]2PF6 (x=mole fraction of MeEDO-TTF, x=0.01-0.13) were prepared by electrooxidation. Mole fractions of EDO-TTF and MeEDO-TTF in EDO-TTF rich alloys were consistent with the donor mixing ratios in preparation. Crystal structures of these alloys at room temperature were isostructural to that of (EDO-TTF)2PF6, where the donor molecules formed a nearly uniform stacking column to give a quasi-one-dimensional Fermi surface. The alloys exhibited a metal-insulator transition with tetramerization within the donor stack and anion-ordering. Temperature-variable structural analysis and Raman spectra revealed that the charge-ordering took place in the low temperature phase of x=0.05 alloy, however, this feature vanished in the x=0.13 alloy. The phase transition temperature decreased with increasing x value from 279 K of pristine (EDO-TTF)2PF6 to 188 K of x=0.13 alloy.

  1. Factoring with qutrits: Shor's algorithm on ternary and metaplectic quantum architectures

    Science.gov (United States)

    Bocharov, Alex; Roetteler, Martin; Svore, Krysta M.

    2017-07-01

    We determine the cost of performing Shor's algorithm for integer factorization on a ternary quantum computer, using two natural models of universal fault-tolerant computing: (i) a model based on magic state distillation that assumes the availability of the ternary Clifford gates, projective measurements, classical control as its natural instrumentation set; (ii) a model based on a metaplectic topological quantum computer (MTQC). A natural choice to implement Shor's algorithm on a ternary quantum computer is to translate the entire arithmetic into a ternary form. However, it is also possible to emulate the standard binary version of the algorithm by encoding each qubit in a three-level system. We compare the two approaches and analyze the complexity of implementing Shor's period-finding function in the two models. We also highlight the fact that the cost of achieving universality through magic states in MTQC architecture is asymptotically lower than in generic ternary case.

  2. High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Luyao; Chen, Wei; Xu, Tao; Yu, Luping

    2015-06-04

    The integration of multiple materials with complementary absorptions into a singlejunction device is regarded as an efficient way to enhance the power conversion efficiency (PCE) of organic solar cells (OSCs). However, due to increased complexity with one more component, only limited high performance ternary systems have been demonstrated previously. Here, we report an efficient ternary blend OSC with a PCE of 9.2%. We show for the first time that the third component can reduce surface trap densities in the ternary blend. Detailed studies unravel that the improved performance results from synergistic effects of enlarged open circuit voltage, suppressed trap assisted recombination, enhanced light absorption, increased hole extraction, efficient energy transfer, and better morphology. The novel working mechanism and high device performance demonstrate new insights and design guidelines for high performance ternary blend solar cells and suggest that ternary structure is a promising platform to boost the efficiency of OSCs.

  3. Local Directional Ternary Pattern for Facial Expression Recognition.

    Science.gov (United States)

    Ryu, Byungyong; Rivera, Adin Ramirez; Kim, Jaemyun; Chae, Oksam

    2017-07-11

    This paper presents a new face descriptor, local directional ternary pattern (LDTP), for facial expression recognition. LDTP efficiently encodes information of emotion-related features (i.e., eyes, eyebrows, upper nose, and mouth) by using the directional information and ternary pattern in order to take advantage of the robustness of edge patterns in the edge region while overcoming weaknesses of edge-based methods in smooth regions. Our proposal, unlike existing histogram-based face description methods that divide the face into several regions and sample the codes uniformly, uses a two level grid to construct the face descriptor while sampling expression-related information at different scales. We use a coarse grid for stable codes (highly related to non-expression), and a finer one for active codes (highly related to expression). This multi-level approach enables us to do a finer grain description of facial motions, while still characterizing the coarse features of the expression. Moreover, we learn the active LDTP codes from the emotionrelated facial regions. We tested our method by using persondependent and independent cross-validation schemes to evaluate the performance. We show that our approaches improve the overall accuracy of facial expression recognition on six datasets.

  4. Genetic Synthesis of New Reversible/Quantum Ternary Comparator

    Directory of Open Access Journals (Sweden)

    DEIBUK, V.

    2015-08-01

    Full Text Available Methods of quantum/reversible logic synthesis are based on the use of the binary nature of quantum computing. However, multiple-valued logic is a promising choice for future quantum computer technology due to a number of advantages over binary circuits. In this paper we have developed a synthesis of ternary reversible circuits based on Muthukrishnan-Stroud gates using a genetic algorithm. The method of coding chromosome is presented, and well-grounded choice of algorithm parameters allowed obtaining better circuit schemes of one- and n-qutrit ternary comparators compared with other methods. These parameters are quantum cost of received reversible devices, delay time and number of constant input (ancilla lines. Proposed implementation of the genetic algorithm has led to reducing of the device delay time and the number of ancilla qutrits to 1 and 2n-1 for one- and n-qutrits full comparators, respectively. For designing of n-qutrit comparator we have introduced a complementary device which compares output functions of 1-qutrit comparators.

  5. Enhanced Light Absorption in Fluorinated Ternary Small-Molecule Photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Eastham, Nicholas D. [Department; Dudnik, Alexander S. [Department; Harutyunyan, Boris [Department; Aldrich, Thomas J. [Department; Leonardi, Matthew J. [Department; Manley, Eric F. [Department; Chemical; Butler, Melanie R. [Department; Harschneck, Tobias [Department; Ratner, Mark A. [Department; Chen, Lin X. [Department; Chemical; Bedzyk, Michael J. [Department; Department; Melkonyan, Ferdinand S. [Department; Facchetti, Antonio [Department; Chang, Robert P. H. [Department; Marks, Tobin J. [Department; Department

    2017-06-14

    Using small-molecule donor (SMD) semiconductors in organic photovoltaics (OPVs) has historically afforded lower power conversion efficiencies (PCEs) than their polymeric counterparts. The PCE difference is attributed to shorter conjugated backbones, resulting in reduced intermolecular interactions. Here, a new pair of SMDs is synthesized based on the diketopyrrolopyrrole-benzodithiophene-diketopyrrolopyrrole (BDT-DPP2) skeleton but having fluorinated and fluorinefree aromatic side-chain substituents. Ternary OPVs having varied ratios of the two SMDs with PC61BM as the acceptor exhibit tunable open-circuit voltages (Vocs) between 0.833 and 0.944 V due to a fluorination-induced shift in energy levels and the electronic “alloy” formed from the miscibility of the two SMDs. A 15% increase in PCE is observed at the optimal ternary SMD ratio, with the short-circuit current density (Jsc) significantly increased to 9.18 mA/cm2. The origin of Jsc enhancement is analyzed via charge generation, transport, and diffuse reflectance measurements, and is attributed to increased optical absorption arising from a maximum in film crystallinity at this SMD ratio, observed by grazing incidence wide-angle X-ray scattering.

  6. Phase transformations in a manganese-alloyed austenitic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Jargelius-Pettersson, R.F.A. (Swedish Inst. for Metals Research, Stockholm (Sweden))

    1994-05-01

    The increasing demands placed on the corrosion resistance of stainless steels has led to the successive development of more highly alloyed materials. In this context nitrogen has shown considerable value as an alloying element but its use is restricted by a solubility limit of approximately 0.2 wt% in conventional austenitic stainless steel grades. Manganese increases the nitrogen solubility appreciably and for this reason there has also been an increased interest in its use as an alloying addition but numerous questions remain to be answered about the effect of both nitrogen and manganese on structural stability. Although much work has been published on the precipitation of secondary phases in CrNi(Mo) stainless steels, there is a relative paucity of information available on manganese-alloyed steels. Brandis et al. investigated precipitation in a 25Cr 17Ni 3Mo 6Mn 0.2Nb steel and found no manganese-enriched phases to occur. Sigma phase was the predominant intermetallic precipitate at low nitrogen contents while higher nitrogen contents retarded the onset of sigma phase precipitation but caused the appearance of chi phase. Boothby et al. investigated a 12Cr 11-35Ni (3Mo) steel in which the nickel was partially replaced by 20 or 30% manganese and found the precipitation of the intermetallic sigma, chi and Laves phases to be promoted by manganese, although again no manganese-enriched phases were observed. Fritscher demonstrated however the existence in the Fe-Cr-Ni system of a brittle ternary Y phase containing 30--60% manganese which was destabilized by nitrogen. The present work represents part of a study designed to gain greater understanding of the precipitation and sensitization behavior of highly alloyed austenitic stainless steels and concentrates on the influence of nitrogen additions up to 0.5wt% on precipitation of secondary phases in a 20Cr 18Ni 4.5Mo 10Mn steel.

  7. Engineering Platinum Alloy Electrocatalysts in Nanoscale for PEMFC Application

    Energy Technology Data Exchange (ETDEWEB)

    He, Ting [Idaho National Laboratory

    2016-03-01

    particle size and microcomposition in nanoscale, it is able to achieve superior electrocatalytic activities comparing with traditional preparative methods. Examples to be discussed are high surface area carbon supported Pt, PtM binary, and PtMN ternary alloys, their synthesis processes, characterizations and electrocatalytic activities towards molecular oxygen reduction.

  8. Phase equilibria in the Zr-Si-B ternary system (Zr-Si-ZrB{sub 2} region) at 1 173 K

    Energy Technology Data Exchange (ETDEWEB)

    Han, Feng; Luo, Hao [Guangxi Univ., Nanning (China). College of Materials Science and Engineering; Guangxi Univ., Nanning (China). Guangxi Key Lab. of Processing for Non-ferrous Metal and Featured Materials; Zhan, Yongzhong [Guangxi Univ., Nanning (China). College of Materials Science and Engineering; Guangxi Univ., Nanning (China). Guangxi Key Lab. of Processing for Non-ferrous Metal and Featured Materials; Guangxi Univ., Nanning (China). Center of Ecological Collaborative Innovation for Aluminum Industry

    2017-10-15

    The isothermal section of the Zr-Si-B ternary system (Zr-Si-ZrB{sub 2} region) at 1 173 K has been experimentally determined. All equilibrated alloys were characterized via X-ray powder diffraction and scanning electron microscopy equipped with energy-dispersive X-ray analysis. A ternary phase Zr{sub 5}(Si{sub 0.86}B{sub 0.14}){sub 3} was found at 1 173 K. The experimental results show that the isothermal section consists of 11 single-phase regions, 26 two-phase regions and 13 three-phase regions. The existence of eight compounds, i.e. ZrSi{sub 2}, ZrSi, Zr{sub 5}Si{sub 4}, Zr{sub 3}Si{sub 2}, Zr{sub 2}Si, ZrB, ZrB{sub 2} and Zr{sub 5}(Si{sub 0.86}B{sub 0.14}){sub 3} in this system has been confirmed in the Zr-Si-ZrB{sub 2} region at 1 173 K.

  9. CdS{sub x}Te{sub 1-x} ternary semiconductors band gaps calculation using ground state and GW approximations

    Energy Technology Data Exchange (ETDEWEB)

    Kheloufi, Nawal; Bouzid, Abderrazak, E-mail: a_bouzid34@hotmail.com

    2016-06-25

    We present band gap calculations of zinc-blende ternary CdS{sub x}Te{sub 1-x} semiconductors within the standard DFT and quasiparticle calculations employing pseudopotential method. The DFT, the local density approximation (LDA) and the Generalized Gradient Approximation (GGA) based calculations have given very poor results compared to experimental data. The quasiparticle calculations have been investigated via the one-shot GW approximation. The present paper discuses and confirms the effect of inclusion of the semicore states in the cadmium (Cd) pseudopotential. The obtained GW quasiparticle band gap using Cd{sup +20} pseudopotential has been improved compared to the obtained results from the available pseudopotential without the treatment of semicore states. Our DFT and quasiparticle band gap results are discussed and compared to the available theoretical calculations and experimental data. - Graphical abstract: Band gaps improvement concerning the binary and ternary alloys using the GW approximation and Cd{sup 20+} pseudopotential with others levels of approximations (the LDA and GGA approximation employing the Cd{sup 12+} and the LDA within Cd{sup 20+} pseudopotential). - Highlights: • The direct Γ- Γ and indirect Γ- X and Γ- L bands gaps show a nonlinear behavior when S content is enhanced. • The quasiparticle band gap result for the investigated semiconductors is improved using the GW approximation. • All CdS{sub x}Te{sub 1-x} compounds in all compositions range from 0 to 1 are direct band gap semiconductors.

  10. Copper-tantalum alloy

    Science.gov (United States)

    Schmidt, Frederick A.; Verhoeven, John D.; Gibson, Edwin D.

    1986-07-15

    A tantalum-copper alloy can be made by preparing a consumable electrode consisting of an elongated copper billet containing at least two spaced apart tantalum rods extending longitudinally the length of the billet. The electrode is placed in a dc arc furnace and melted under conditions which co-melt the copper and tantalum to form the alloy.

  11. Quantum Critical Behavior in a Concentrated Ternary Solid Solution.

    Science.gov (United States)

    Sales, Brian C; Jin, Ke; Bei, Hongbin; Stocks, G Malcolm; Samolyuk, German D; May, Andrew F; McGuire, Michael A

    2016-05-18

    The face centered cubic (fcc) alloy NiCoCrx with x ≈ 1 is found to be close to the Cr concentration where the ferromagnetic transition temperature, Tc, goes to 0. Near this composition these alloys exhibit a resistivity linear in temperature to 2 K, a linear magnetoresistance, an excess -TlnT (or power law) contribution to the low temperature heat capacity, and excess low temperature entropy. All of the low temperature electrical, magnetic and thermodynamic properties of the alloys with compositions near x ≈ 1 are not typical of a Fermi liquid and suggest strong magnetic fluctuations associated with a quantum critical region. The limit of extreme chemical disorder in this simple fcc material thus provides a novel and unique platform to study quantum critical behavior in a highly tunable system.

  12. Sn–Ag–Cu nanosolders: Melting behavior and phase diagram prediction in the Sn-rich corner of the ternary system

    Science.gov (United States)

    Roshanghias, Ali; Vrestal, Jan; Yakymovych, Andriy; Richter, Klaus W.; Ipser, Herbert

    2015-01-01

    Melting temperatures of Sn–Ag–Cu (SAC) alloys in the Sn-rich corner are of interest for lead-free soldering. At the same time, nanoparticle solders with depressed melting temperatures close to the Sn–Pb eutectic temperature have received increasing attention. Recently, the phase stability of nanoparticles has been the subject of plenty of theoretical and empirical investigations. In the present study, SAC nanoparticles of various sizes have been synthesized via chemical reduction and the size dependent melting point depression of these particles has been specified experimentally. The liquidus projection in the Sn-rich corner of the ternary SAC system has also been calculated as a function of particle size, based on the CALPHAD-approach. The calculated melting temperatures were compared with those obtained experimentally and with values reported in the literature, which revealed good agreement. The model also predicts that with decreasing particle size, the eutectic composition shifts towards the Sn-rich corner. PMID:26082567

  13. Evaluation of ternary blended cements for use in transportation concrete structures

    Science.gov (United States)

    Gilliland, Amanda Louise

    This thesis investigates the use of ternary blended cement concrete mixtures for transportation structures. The study documents technical properties of three concrete mixtures used in federally funded transportation projects in Utah, Kansas, and Michigan that used ternary blended cement concrete mixtures. Data were also collected from laboratory trial batches of ternary blended cement concrete mixtures with mixture designs similar to those of the field projects. The study presents the technical, economic, and environmental advantages of ternary blended cement mixtures. Different barriers of implementation for using ternary blended cement concrete mixtures in transportation projects are addressed. It was concluded that there are no technical, economic, or environmental barriers that exist when using most ternary blended cement concrete mixtures. The technical performance of the ternary blended concrete mixtures that were studied was always better than ordinary portland cement concrete mixtures. The ternary blended cements showed increased durability against chloride ion penetration, alkali silica reaction, and reaction to sulfates. These blends also had less linear shrinkage than ordinary portland cement concrete and met all strength requirements. The increased durability would likely reduce life cycle costs associated with concrete pavement and concrete bridge decks. The initial cost of ternary mixtures can be higher or lower than ordinary portland cement, depending on the supplementary cementitious materials used. Ternary blended cement concrete mixtures produce less carbon dioxide emissions than ordinary portland cement mixtures. This reduces the carbon footprint of construction projects. The barriers associated with implementing ternary blended cement concrete for transportation projects are not significant. Supplying fly ash returns any investment costs for the ready mix plant, including silos and other associated equipment. State specifications can make

  14. Ultrahigh temperature intermetallic alloys

    Energy Technology Data Exchange (ETDEWEB)

    Brady, M.P.; Zhu, J.H.; Liu, C.T.; Tortorelli, P.F.; Wright, J.L.; Carmichael, C.A.; Walker, L.R. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.

    1997-12-01

    A new family of Cr-Cr{sub 2}X based alloys with fabricability, mechanical properties, and oxidation resistance superior to previously developed Cr-Cr{sub 2}Nb and Cr-Cr{sub 2}Zr based alloys has been identified. The new alloys can be arc-melted/cast without cracking, and exhibit excellent room temperature and high-temperature tensile strengths. Preliminary evaluation of oxidation behavior at 1100 C in air indicates that the new Cr-Cr{sub 2}X based alloys form an adherent chromia-based scale. Under similar conditions, Cr-Cr{sub 2}Nb and Cr-Cr{sub 2}Zr based alloys suffer from extensive scale spallation.

  15. Structural, electronic, mechanical, thermal and optical properties of B(P,As)1-xNx; (x = 0, 0.25, 0.5, 0.75, 1) alloys and hardness of B(P,As) under compression using DFT calculations

    Science.gov (United States)

    Viswanathan, E.; Sundareswari, M.; Jayalakshmi, D. S.; Manjula, M.; Krishnaveni, S.

    2017-09-01

    First principles calculations are carried out in order to analyze the structural, electronic, mechanical, thermal and optical properties of BP and BAs compounds by ternary alloying with nitrogen namely B(P,As)1-xNx (x = 0.25, 0.5, 0.75) alloys at ambient condition. Thereby we report the mechanical and thermal properties of B(P,As)1-xNx (x = 0.25, 0.5, 0.75) alloys namely bulk modulus, shear modulus, Young's modulus, hardness, ductile-brittle nature, elastic wave velocity, Debye temperature, melting point, etc.; optical properties of B(P)1-xNx (x = 0.25, 0.5, 0.75) and B(As)1-xNx (x = 0.25, 0.75) alloys namely the dielectric function of real and imaginary part, refractive index, extinction coefficient and reflectivity and the hardness profile of the parent compounds BP and BAs under compression. The charge density plot, density of states histograms and band structures are plotted and discussed for all the ternary alloys of the present study. The calculated results agree very well with the available literature. Analysis of the present study reveals that the ternary alloy combinations namely BP.25N.75 and BAs.25N.75 could be superhard materials; hardness of BP and BAs increases with compression.

  16. Effect of ultrasonic treatment on formation of iron-containing intermetallic compounds in Al-Si alloys

    Directory of Open Access Journals (Sweden)

    Yu-bo Zhang

    2016-09-01

    Full Text Available Iron is generally regarded as an unavoidable impurity in Al-Si casting alloys. The acicular Al3Fe and β-Al5FeSi (or Al9Si2Fe2 are common iron-containing intermetallic compounds (IMCs in conventional structure which have a detrimental impact on the mechanical properties. In this paper, ultrasonic field (USF was applied to modify acicular iron phases in Al-12%Si-2%Fe and Al-2%Fe alloys. The results show that the USF applied to Al-Fe alloys caused the morphological transformation of both primary and eutectic Al3Fe from acicular to blocky and granular without changes in their composition. In the case of Al-Si-Fe alloys, ultrasonic treatment led to both morphological and compositional conversion of the ternary iron IMCs. When the USF was applied, the acicular β-Al9Si2Fe2 was substituted by star-like α-Al12Si2Fe3. The modification rate of both binary and ternary iron IMCs relates to the USF treatment duration. The undercooling induced by the ultrasonic vibration contributes to the nucleation of intermetallics and can explain the transformation effect.

  17. Effects of alloying elements on the kinetics of austenitization from pearlite in Fe-C-M alloys

    Science.gov (United States)

    Xia, Yuan; Enomoto, Masato; Yang, Zhigang; Li, Zhaodong; Zhang, Chi

    2013-03-01

    The effects of alloying elements on the kinetics of austenitization from pearlite structure were studied by computer simulation in Fe-C-M ternary alloys, where M is Mn, Cr, Si or Ni, assuming local equilibrium conditions at all transformation interfaces. A thin austenite film was assumed to nucleate at ferrite/cementite interfaces and grow in one dimension. The existence of a partition to no-partition transition temperature (PNTT) was rationalized. Above the PNTT, the growth rate of austenite is governed by the difference in carbon activity between austenite/cementite and ferrite/austenite interfaces; a substitutional element influences the reaction rate by affecting carbon activity. Below the PNTT, redistribution of M is necessary. The PNTT increases with the concentration of all alloy elements except Ni, which has a large segregation tendency in austenite from both ferrite and cementite, as well as repulsive interaction with carbon. The amount of overheating at PNTT from Ae1 increases in the order Si (∼Ni), Mn and Cr, essentially in agreement with a recently reported experiment.

  18. A theoretical study of ternary indole-cation-anion complexes.

    Science.gov (United States)

    Carrazana-García, Jorge A; Cabaleiro-Lago, Enrique M; Campo-Cacharrón, Alba; Rodríguez-Otero, Jesús

    2014-12-07

    The simultaneous interactions of an anion and a cation with a π system were investigated by MP2 and M06-2X theoretical calculations. Indole was chosen as a model π system for its relevance in biological environments. Two different orientations of the anion, interacting with the N-H and with the C-H groups of indole, were considered. The four cations (Na(+), NH4(+), C(NH2)3(+) and N(CH3)4(+)) and the four anions (Cl(-), NO3(-), HCOO(-) and BF4(-)) included in the study are of biological interest. The total interaction energy of the ternary complexes was calculated and separated into its two- and three-body components and all of them are further divided into their electrostatic, exchange, repulsion, polarization and dispersion contributions using the local molecular orbital-energy decomposition analysis (LMO-EDA) methodology. The binding energy of the indole-cation-anion complexes depends on both ions, with the cation having the strongest effect. The intense cation-anion attraction determines the geometric and energetic features in all ternary complexes. These structures, with both ions on the same side of the π system, show an anti-cooperative interaction. However, the interaction is not only determined by electrostatics, but also the polarization contribution is important. Specific interactions like the one established between the anion and the N-H group of indole or the proton transfer between an acidic cation and a basic anion play a significant role in the energetics and the structure of particular complexes. The presence of the polar solvent as modelled with the polarizable continuum model (PCM) does not seem to have a significant effect on the geometry of the ternary complexes, but drastically weakens the interaction energy. Also, the strength of the interaction is reduced at a faster rate when the anion is pushed away, compared to the results obtained in the gas phase. The combination of PCM with the addition of one water molecule indicates that the PCM

  19. Avoiding or Promoting Graphite in Carbon-Rich Chromium-Containing CoNiFer Cast Alloys—Part 2: Microstructures of the Elaborated Alloys

    OpenAIRE

    Ophélie Hestin; Elise Souaillat; Ahmed Dia; Moussa Ba; Patrice Berthod

    2012-01-01

    Nine M-xCr-yC ternary alloys, three cobalt based, three nickel based and three iron based, were elaborated by foundry, from chemical compositions previously selected by the mean of thermodynamic calculations. They were metallographically characterized, using electron microscopy, image analysis, and X-ray diffraction. The as-cast microstructures are in rather good agreement with the ones predicted at 500 and/or 600°C, despite that the elaboration conditions did not meet any thermodynamic equil...

  20. Multi-modal fission in collinear ternary cluster decay of 252Cf(sf, fff

    Directory of Open Access Journals (Sweden)

    W. von Oertzen

    2015-06-01

    Full Text Available We discuss the multiple decay modes of collinear fission in 252Cf(sf, fff, with three fragments as suggested by the potential energy surface (PES. Fission as a statistical decay is governed by the phase space of the different decay channels, which are suggested in the PES-landscape. The population of the fission modes is determined by the minima in the PES at the scission points and on the internal potential barriers. The ternary collinear decay proceeds as a sequential process, in two steps. The originally observed ternary decay of 252Cf(sf into three different masses (e.g. 132–140Sn, 52–48Ca, 68–72Ni, observed by the FOBOS group in the FLNR (Flerov Laboratory for Nuclear Reactions of the JINR (Dubna the collinear cluster tripartition (CCT, is one of the ternary fission modes. This kind of “true ternary fission” of heavy nuclei has often been predicted in theoretical works during the last decades. In the present note we discuss different ternary fission modes in the same system. The PES shows pronounced minima, which correspond to several modes of ternary fragmentations. These decays have very similar dynamical features as the previously observed CCT-decays. The data obtained in the experiments on CCT allow us to extract the yields for different decay modes using specific gates on the measured parameters, and to establish multiple modes of the ternary fission decay.

  1. He and Be ternary spontaneous fission of sup 2 sup 5 sup 2 Cf

    CERN Document Server

    Hwang, J K; Ramayya, A V; Hamilton, J H

    2002-01-01

    Ternary and binary fission studies of sup 2 sup 5 sup 2 Cf have been carried out by using the Gammasphere detector array with light charged particle (LCD) detectors. The relative sup 4 He and sup 5 He ternary fission yields were determined. The kinetic energies of the sup 5 He and sup 4 He ternary particles were found to be approximately 11 and 16 MeV, respectively. The sup 5 He particles contribute 10-20 % to the total observed alpha ternary yield. The data indicate that in nuclei with octupole deformations the population for the negative parity bands might be enhanced in the alpha ternary fission. >From LCP-gamma double gated spectra, neutron multiplicity distributions for alpha ternary fission pairs were measured. The average neutron multiplicity decreases about 0.7 AMU in going from the binary to alpha ternary fission in the approximately same mass splittings (104-146). From the analysis of the gamma-gamma matrix gated on the sup 1 sup 0 Be particles, the two fragment pairs of sup 1 sup 3 sup 8 Xe - sup 1...

  2. Wannier function analysis of silicon-carbon alloys

    CERN Document Server

    Fitzhenry, P; Marks, N A; Cooper, N C; McKenzie, D R

    2003-01-01

    Maximally localized Wannier functions are the basis of a new technique for resolving ambiguous bonding issues for amorphous materials. Geometrical methods using the Wannier function representation provide an insightful chemical picture of local bonding and hybridization in disordered structures. Central to these methods is the notion of treating the Wannier function centres as a virtual atomic species with a well-defined degree of localization. Using Wannier function methods, we classify and quantify the types of bonding present in a sample of the ternary alloy hydrogenated amorphous silicon carbide, C sub 2 sub 2 Si sub 2 sub 2 H sub 2 sub 0. In addition to the bonding previously observed for this material, we see three-centre bonding and flipping bonds. We identify a cluster defect in our sample associated with these flipping bonds, and observe a temperature dependence of the bond flipping. This effect may be observable using temperature-dependent Raman spectroscopy.

  3. Site occupancy of Fe in ternary Ni 75-x

    Indian Academy of Sciences (India)

    The results of a detailed structural and magnetic study clearly indicate that regardless of the thermal history of the samples, Fe has a strong preference for the Ni sites in Ni-poor (non-stoichiometric) Ni75Al25 alloys. Fe substitution has a profound effect on the nature of magnetism in Ni75Al25.

  4. Hardware emulation of Memristor based Ternary Content Addressable Memory

    KAUST Repository

    Bahloul, Mohamed A.

    2017-12-13

    MTCAM (Memristor Ternary Content Addressable Memory) is a special purpose storage medium in which data could be retrieved based on the stored content. Using Memristors as the main storage element provides the potential of achieving higher density and more efficient solutions than conventional methods. A key missing item in the validation of such approaches is the wide spread availability of hardware emulation platforms that can provide reliable and repeatable performance statistics. In this paper, we present a hardware MTCAM emulation based on 2-Transistors-2Memristors (2T2M) bit-cell. It builds on a bipolar memristor model with storing and fetching capabilities based on the actual current-voltage behaviour. The proposed design offers a flexible verification environment with quick design revisions, high execution speeds and powerful debugging techniques. The proposed design is modeled using VHDL and prototyped on Xilinx Virtex® FPGA.

  5. Normal freezing of ideal ternary systems of the pseudobinary type

    Science.gov (United States)

    Li, C. H.

    1972-01-01

    Perfect liquid mixing but no solid diffusion is assumed in normal freezing. In addition, the molar compositions of the freezing solid and remaining liquid, respectively, follow the solidus and liquidus curves of the constitutional diagram. For the linear case, in which both the liquidus and solidus are perfectly straight lines, the normal freezing equation giving the fraction solidified at each melt temperature and the solute concentration profile in the frozen solid was determined as early as 1902, and has since been repeatedly published. Corresponding equations for quadratic, cubic or higher-degree liquidus and solidus lines have also been obtained. The equation of normal freezing for ideal ternary liquid solutions solidified into ideal solid solutions of the pseudobinary type is given. Sample computations with the use of this new equation were made and are given for the Ga-Al-As system.

  6. Nonequilibrium patterns in phase-separating ternary membranes

    Science.gov (United States)

    Gómez, Jordi; Sagués, Francesc; Reigada, Ramon

    2009-07-01

    We present a nonequilibrium approach for the study of a two-dimensional phase-separating ternary mixture. When the component that promotes phase separation is dynamically exchanged with the medium, the separation process is halted and actively maintained finite-size segregation domains appear in the system. In addition to this effect, already reported in our earlier work [J. Gómez, F. Sagués, and R. Reigada, Phys. Rev. E 77, 021907 (2008)], the use of a generic Ginzburg-Landau formalism and the inclusion of thermal fluctuations provide a more dynamic description of the resulting domain organization. Its size, shape, and stability properties are studied. Larger and more circular and stable domains are formed when decreasing the recycling rate, increasing the mobility of the exchanged component, and the mixture is quenched deeper. We expect this outcome to be of applicability in raft phenomenology in plasmatic cell membranes.

  7. Hardness and Microstructure of Binary and Ternary Nitinol Compounds

    Science.gov (United States)

    Stanford, Malcolm K.

    2016-01-01

    The hardness and microstructure of twenty-six binary and ternary Nitinol (nickel titanium, nickel titanium hafnium, nickel titanium zirconium and nickel titanium tantalum) compounds were studied. A small (50g) ingot of each compound was produced by vacuum arc remelting. Each ingot was homogenized in vacuum for 48 hr followed by furnace cooling. Specimens from the ingots were then heat treated at 800, 900, 1000 or 1100 degree C for 2 hr followed by water quenching. The hardness and microstructure of each specimen was compared to the baseline material (55-Nitinol, 55 at.% nickel - 45 at.% titanium, after heat treatment at 900 degC). The results show that eleven of the studied compounds had higher hardness values than the baseline material. Moreover, twelve of the studied compounds had measured hardness values greater 600HV at heat treatments from 800 to 900 degree C.

  8. Comprehensive characterization of chitosan/PEO/levan ternary blend films.

    Science.gov (United States)

    Bostan, Muge Sennaroglu; Mutlu, Esra Cansever; Kazak, Hande; Sinan Keskin, S; Oner, Ebru Toksoy; Eroglu, Mehmet S

    2014-02-15

    Ternary blend films of chitosan, PEO (300,000) and levan were prepared by solution casting method and their phase behavior, miscibility, thermal and mechanical properties as well as their surface energy and morphology were characterized by different techniques. FT-IR analyses of blend films indicated intermolecular hydrogen bonding between blend components. Thermal and XRD analysis showed that chitosan and levan suppressed the crystallinity of PEO up to nearly 25% of PEO content in the blend, which resulted in more amorphous film structures at higher PEO/(chitosan+levan) ratios. At more than 30% of PEO concentration, contact angle (CA) measurements showed a surface enrichment of PEO whereas at lower PEO concentrations, chitosan and levan were enriched on the surfaces leading to more amorphous and homogenous surfaces. This result was further confirmed by atomic force microscopy (AFM) images. Cell proliferation and viability assay established the high biocompatibility of the blend films. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Designing and analysing parallel control for multifeed ternary systems

    Directory of Open Access Journals (Sweden)

    Rocío Solar-González

    2010-06-01

    Full Text Available This paper explores a parallel control structure for improving the behaviour of a chemical plant having recycling and multi- ple feed streams; a ternary system is taken as an example,having an A + B → C second-order irreversible reaction. Material recycling dynamics can induce the so-called snowball effect in the presence of disturbance in the feed stream. The snowball effect can be prevented by distributing load through the parallel control scheme. A control structure was thus pro- posed where product composition was regulated by means of simultaneous feedback manipulation of final column vapour boilup rate and reactor temperature. An extension was made for one reactor, one distillation column and recycle stream configuration. Nonlinear simulations showed that effective composition control could be obtained with moderate vapour boilup control efforts.

  10. Morphological Control Agent in Ternary Blend Bulk Heterojunction Solar Cells

    Directory of Open Access Journals (Sweden)

    Hsueh-Chung Liao

    2014-11-01

    Full Text Available Bulk heterojunction (BHJ organic photovoltaic (OPV promise low cost solar energy and have caused an explosive increase in investigations during the last decade. Control over the 3D morphology of BHJ blend films in various length scales is one of the pillars accounting for the significant advance of OPV performance recently. In this contribution, we focus on the strategy of incorporating an additive into BHJ blend films as a morphological control agent, i.e., ternary blend system. This strategy has shown to be effective in tailoring the morphology of BHJ through different inter- and intra-molecular interactions. We systematically review the morphological observations and associated mechanisms with respect to various kinds of additives, i.e., polymers, small molecules and inorganic nanoparticles. We organize the effects of morphological control (compatibilization, stabilization, etc. and provide general guidelines for rational molecular design for additives toward high efficiency and high stability organic solar cells.

  11. Ternary gypsum-based materials: Composition, properties and utilization

    Science.gov (United States)

    Doleželová, M.; Svora, P.; Vimmrová, A.

    2017-10-01

    In spite of the fact that gypsum is one of the most environmentally friendly binders, utilization of gypsum products is relatively narrow. The main problem of gypsum materials is their low resistance to the wet environment and radical decrease of mechanical properties with increasing moisture. The solution of the problem could be in use of composed gypsum-based binders, usually ternary, comprising gypsum, pozzolan and alkali activator of pozzolan reaction. These materials have a better moisture resistance and often also better mechanical properties. Paper provides literature survey of the possible compositions, properties and ways of utilization of the composed gypsum-based binders with latent hydraulic and pozzolan materials together with some results of present research performed by authors.

  12. Issues Affecting the Synthetic Scalability of Ternary Metal Ferrite Nanoparticles

    Directory of Open Access Journals (Sweden)

    Lauren Morrow

    2015-01-01

    Full Text Available Ternary Mn-Zn ferrite (MnxZn1-xFe2O4 nanoparticles (NPs have been prepared by the thermal decomposition of an oleate complex, sodium dodecylbenzenesulfonate (SDBS mediated hydrazine decomposition of the chloride salts, and triethylene glycol (TREG mediated thermal decomposition of the metal acetylacetonates. Only the first method was found to facilitate the synthesis of uniform, isolable NPs with the correct Mn : Zn ratio (0.7 : 0.3 as characterized by small angle X-ray scattering (SAXS, transmission electron microscopy (TEM, and inductively coupled plasma-optical emission spectroscopy (ICP-OES. Scaling allowed for retention of the composition and size; however, attempts to prepare Zn-rich ferrites did not result in NP formation. Thermogravimetric analysis (TGA indicated that the incomplete decomposition of the metal-oleate complexes prior to NP nucleation for Zn-rich compositions is the cause.

  13. Cohesion energy calculations for ternary ionic novel crystals

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Polo, G; Valdes, E. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Mijngos, R. R; Duarte, D. [Universidad de Sonora, Hermosillo, Sonora (Mexico)

    2001-12-01

    The present work calculates the value of the link energy of a crystalline ternary structure newly formed by alkali halides. The ternary structure prepared with different concentrations of KCI{sub x}KBr{sub y}RbCl{sub z} maintains a very good miscibility and stability. The calculation is based on the use of a generalization of the Vegard's law (which generally is valid for binary compounds) for calculating the values of the lattice constant and the repulsive m exponent. The values of the lattice parameter given X-ray diffractometry agrees with the close approximation of the calculated value of the method used. It also compares the value of energy cohesion obtained by the Born expression with more complex approximations. [Spanish] En el presente trabajo se calcula el valor de la energia de amarre de una estructura ternaria cristalina nueva formada por halogenuros alcalinos. La estructura ternaria preparada con diferentes concentraciones KCI{sub x}KBr{sub y}RbCl{sub z} mantiene una muy buena estabilidad y miscibilidad. El calculo se basa en el uso de una generalizacion de la ley de Vegard (que en general es valida para compuestos binarios) para calcular los valores de la constante de red y de exponente repulsivo m. El valor del parametro de red medido por difractometria de rayos X, concuerda en buena aproximacion con el valor calculado por el metodo usado. Tambien se compara el valor de la energia de cohesion obtenido por la expresion de Born con aproximaciones mas complejas.

  14. Boron-Based Hydrogen Storage: Ternary Borides and Beyond

    Energy Technology Data Exchange (ETDEWEB)

    Vajo, John J. [HRL Laboratories, LLC, Malibu, CA (United States)

    2016-04-28

    DOE continues to seek reversible solid-state hydrogen materials with hydrogen densities of ≥11 wt% and ≥80 g/L that can deliver hydrogen and be recharged at moderate temperatures (≤100 °C) and pressures (≤100 bar) enabling incorporation into hydrogen storage systems suitable for transportation applications. Boron-based hydrogen storage materials have the potential to meet the density requirements given boron’s low atomic weight, high chemical valance, and versatile chemistry. However, the rates of hydrogen exchange in boron-based compounds are thus far much too slow for practical applications. Although contributing to the high hydrogen densities, the high valance of boron also leads to slow rates of hydrogen exchange due to extensive boron-boron atom rearrangements during hydrogen cycling. This rearrangement often leads to multiple solid phases occurring over hydrogen release and recharge cycles. These phases must nucleate and react with each other across solid-solid phase boundaries leading to energy barriers that slow the rates of hydrogen exchange. This project sought to overcome the slow rates of hydrogen exchange in boron-based hydrogen storage materials by minimizing the number of solid phases and the boron atom rearrangement over a hydrogen release and recharge cycle. Two novel approaches were explored: 1) developing matched pairs of ternary borides and mixed-metal borohydrides that could exchange hydrogen with only one hydrogenated phase (the mixed-metal borohydride) and only one dehydrogenated phase (the ternary boride); and 2) developing boranes that could release hydrogen by being lithiated using lithium hydride with no boron-boron atom rearrangement.

  15. The Role of Si and Cu Alloying Elements on the Dendritic Growth and Microhardness in Horizontally Solidified Binary and Multicomponent Aluminum-Based Alloys

    Science.gov (United States)

    Araújo, Eugênio C.; Barros, André S.; Kikuchi, Rafael H.; Silva, Adrina P.; Gonçalves, Fernando A.; Moreira, Antonio L.; Rocha, Otávio L.

    2017-03-01

    Horizontal directional solidification (HDS) experiments were carried out with Al-3wtpctCu, Al-3wtpctSi, and Al- 3wtpctCu-5.5wtpctSi alloys in order to analyze the interrelation between the secondary dendrite arm spacing ( λ 2) and microhardness (HV). A water-cooled horizontal directional solidification device was applied. Microstructural characterization has been carried out using traditional techniques of metallography, optical, and SEM microscopy. The ThermoCalc software was used to generate the phase equilibrium diagrams as a function of Cu and Si for the analyzed alloys. The effects of Si and Cu elements on the λ 2 and HV evolution of the hypoeutectic binary Al-Cu and Al-Si alloys have been analyzed as well as the addition of Si in the formation of ternary Al-Cu-Si alloy. The secondary dendrite arm spacing was correlated with local solidification thermal parameters such as growth rate ( V L), cooling rate ( T R), and local solidification time ( t SL). This has allowed to observe that power experimental functions given by λ 2 = Constant ( V L)-2/3, λ 2 = Constant ( T R)-1/3 and λ 2 = Constant ( t SL)1/3 may represent growth laws of λ 2 with corresponding thermal parameters for investigated alloys. Hall-Petch equations have also been used to characterize the dependence of HV with λ 2. A comparative analysis is performed between λ 2 experimental values obtained in this study for Al-3wtpctCu-5.5wtpctSi alloy and the only theoretical model from the literature that has been proposed to predict the λ 2 growth in multicomponent alloys. Comparisons with literature results for upward directional solidification were also performed.

  16. Theoretical investigation of structural, mechanical and electronic properties of GaAs1-xNx alloys under ambient and high pressure

    Science.gov (United States)

    Li, Jian; Han, Xiuxun; Dong, Chen; Fan, Changzeng

    2017-12-01

    Using first-principles total energy calculations, we have studied the structural, mechanical and electronic properties of GaAs1-xNx ternary semiconductor alloys with the zinc-blende crystal structure over the whole nitrogen concentration range (with x from 0 to 1) within density functional theory (DFT) framework. To obtain the ideal band gap, we employ the semi-empirical approach called local density approximation plus the multi-orbital mean-field Hubbard model (LDA+U). The calculated results illustrate the varying lattice constants and band gap in GaAs1-xNx alloys as functions of the nitrogen concentration x. According to the pressure dependence of the lattice constants and volume, the higher N concentration alloy exhibits the better anti-compressibility. In addition, an increasing band gap is predicted under 20 GPa pressure for GaAs1-xNx alloys.

  17. Iron atoms redistribution in oxide films of Zr-Fe, Zr-Fe-Cu alloys during corrosion in autoclave at 350°C

    Science.gov (United States)

    Filippov, V.; Bateev, A.

    2016-04-01

    The data on changes of iron atoms state in the oxide films of binary Zr-1.24 mas.%Fe and ternary Zr-1.39 mas.%Fe-0.60 mas.%Cu zirconium alloys are obtained. Alloys are subjected to corrosion tests under autoclave conditions at 350°C temperature in a steam-water environment under pressure p = 16.8 MPa. In initial specimens of the alloys the iron atoms are in the form of intermetallic compounds. In oxide films the decomposition of intermetallic compounds and formation of new compounds occurs with structural phase distortion. In the oxide films metallic the metallic iron particles α-Fe, iron oxide in the form of hematite α-Fe2O3, solid solutions of iron ions in ZrO2 are formed. The phase composition of the oxide films depends on the alloy composition and changes during the growth process of the oxide film.

  18. Final Assessment of Preindustrial Solid-State Route for High-Performance Mg-System Alloys Production: Concluding the EU Green Metallurgy Project

    Science.gov (United States)

    D'Errico, Fabrizio; Plaza, Gerardo Garces; Giger, Franz; Kim, Shae K.

    2013-10-01

    The Green Metallurgy Project, a LIFE+ project co-financed by the European Union Commission, has now been completed. The purpose of the Green Metallurgy Project was to establish and assess a preindustrial process capable of using nanostructured-based high-performance Mg-Zn(Y) magnesium alloys and fully recycled eco-magnesium alloys. In this work, the Consortium presents the final outcome and verification of the completed prototype construction. To compare upstream cradle-to-grave footprints when ternary nanostructured Mg-Y-Zn alloys or recycled eco-magnesium chips are produced during the process cycle using the same equipment, a life cycle analysis was completed following the ISO 14040 methodology. During tests to fine tune the prototype machinery and compare the quality of semifinished bars produced using the scaled up system, the Buhler team produced interesting and significant results. Their tests showed the ternary Mg-Y-Zn magnesium alloys to have a highest specific strength over 6000 series wrought aluminum alloys usually employed in automotive components.

  19. Ternary CNTs@TiO2/CoO Nanotube Composites: Improved Anode Materials for High Performance Lithium Ion Batteries

    Directory of Open Access Journals (Sweden)

    Mahmoud Madian

    2017-06-01

    Full Text Available TiO2 nanotubes (NTs synthesized by electrochemical anodization are discussed as very promising anodes for lithium ion batteries, owing to their high structural stability, high surface area, safety, and low production cost. However, their poor electronic conductivity and low Li+ ion diffusivity are the main drawbacks that prevent them from achieving high electrochemical performance. Herein, we report the fabrication of a novel ternary carbon nanotubes (CNTs@TiO2/CoO nanotubes composite by a two-step synthesis method. The preparation includes an initial anodic fabrication of well-ordered TiO2/CoO NTs from a Ti-Co alloy, followed by growing of CNTs horizontally on the top of the oxide films using a simple spray pyrolysis technique. The unique 1D structure of such a hybrid nanostructure with the inclusion of CNTs demonstrates significantly enhanced areal capacity and rate performances compared to pure TiO2 and TiO2/CoO NTs, without CNTs tested under identical conditions. The findings reveal that CNTs provide a highly conductive network that improves Li+ ion diffusivity, promoting a strongly favored lithium insertion into the TiO2/CoO NT framework, and hence resulting in high capacity and an extremely reproducible high rate capability.

  20. Processing of Ni30Pt20Ti50 High-Temperature Shape-Memory Alloy Into Thin Rod Demonstrated

    Science.gov (United States)

    Noebe, Ronald D.; Draper, Susan L.; Biles, Tiffany A.; Leonhardt, Todd

    2005-01-01

    High-temperature shape-memory alloys (HTSMAs) based on nickel-titanium (NiTi) with significant ternary additions of palladium (Pd), platinum (Pt), gold (Au), or hafnium (Hf) have been identified as potential high-temperature actuator materials for use up to 500 C. These materials provide an enabling technology for the development of "smart structures" used to control the noise, emissions, or efficiency of gas turbine engines. The demand for these high-temperature versions of conventional shape-memory alloys also has been growing in the automotive, process control, and energy industries. However these materials, including the NiPtTi alloys being developed at the NASA Glenn Research Center, will never find widespread acceptance unless they can be readily processed into useable forms.

  1. Mössbauer study of oxide films of Fe-, Sn-, Cr- doped zirconium alloys during corrosion in autoclave

    Energy Technology Data Exchange (ETDEWEB)

    Filippov, V. P., E-mail: vpfilippov@mephi.ru; Bateev, A. B.; Lauer, Yu. A. [National Research Nuclear University “MEPhI” (Moscow Engineering Physics Institute) (Russian Federation)

    2016-12-15

    Mössbauer investigations were used to compare iron atom states in oxide films of binary Zr-Fe, ternary Zr-Fe-Cu and quaternary Zr-Fe-Cr-Sn alloys. Oxide films are received in an autoclave at a temperature of 350–360 °C and at pressure of 16.8 MPa. The corrosion process decomposes the intermetallic precipitates in alloys and forms metallic iron with inclusions of chromium atoms α–Fe(Cr), α–Fe(Cu), α–Fe {sub 2}O{sub 3} and Fe {sub 3}O{sub 4} compounds. Some iron ions are formed in divalent and in trivalent paramagnetic states. The additional doping influences on corrosion kinetics and concentration of iron compounds and phases formed in oxide films. It was shown the correlation between concentration of iron in different chemical states and corrosion resistance of alloys.

  2. Photoluminescence polarization anisotropy for studying long-range structural ordering within semiconductor multi-atomic alloys and organic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Prutskij, T.; Percino, J. [Instituto de Ciencias, BUAP, Privada 17 Norte, No 3417, col. San Miguel Huyeotlipan, 72050, Puebla, Pue. (Mexico); Orlova, T. [Department of Chemical and Biochemical Engineering, University of Notre Dame, Notre Dame, IN (United States); Vavilova, L. [Ioffe Physical-Technical Institute, 26 Polytekhnicheskaya, St Petersburg 194021, Russian Federation (Russian Federation)

    2013-12-04

    Long-range structural ordering within multi-component semiconductor alloys and organic crystals leads to significant optical anisotropy and, in particular, to anisotropy of the photoluminescence (PL) emission. The PL emission of ternary and quaternary semiconductor alloys is polarized if there is some amount of the atomic ordering within the crystal structure. We analyze the polarization of the PL emission from the quaternary GaInAsP semiconductor alloy grown by Liquid Phase Epitaxy (LPE) and conclude that it could be caused by low degree atomic ordering within the crystal structure together with the thermal biaxial strain due to difference between the thermal expansion coefficients of the layer and the substrate. We also study the state of polarization of the PL from organic crystals in order to identify different features of the crystal PL spectrum.

  3. Mössbauer study of oxide films of Fe-, Sn-, Cr- doped zirconium alloys during corrosion in autoclave

    Science.gov (United States)

    Filippov, V. P.; Bateev, A. B.; Lauer, Yu. A.

    2016-12-01

    Mössbauer investigations were used to compare iron atom states in oxide films of binary Zr-Fe, ternary Zr-Fe-Cu and quaternary Zr-Fe-Cr-Sn alloys. Oxide films are received in an autoclave at a temperature of 350-360 °C and at pressure of 16.8 MPa. The corrosion process decomposes the intermetallic precipitates in alloys and forms metallic iron with inclusions of chromium atoms α-Fe(Cr), α-Fe(Cu), α-Fe 2O3 and Fe 3O4 compounds. Some iron ions are formed in divalent and in trivalent paramagnetic states. The additional doping influences on corrosion kinetics and concentration of iron compounds and phases formed in oxide films. It was shown the correlation between concentration of iron in different chemical states and corrosion resistance of alloys.

  4. Shape Memory Effect in Cast Versus Deformation-Processed NiTiNb Alloys

    Science.gov (United States)

    Hamilton, Reginald F.; Lanba, Asheesh; Ozbulut, Osman E.; Tittmann, Bernhard R.

    2015-06-01

    The shape memory effect (SME) response of a deformation-processed NiTiNb shape memory alloy is benchmarked against the response of a cast alloy. The insoluble Nb element ternary addition is known to widen the hysteresis with respect to the binary NiTi alloy. Cast microstructures naturally consist of a cellular arrangement of characteristic eutectic microconstituents surrounding primary matrix regions. Deformation processing typically aligns the microconstituents such that the microstructure resembles discontinuous fiber-reinforced composites. Processed alloys are typically characterized for heat-to-recover applications and thus deformed at constant temperature and subsequently heated for SME recovery, and the critical stress levels are expected to facilitate plastic deformation of the microconstituents. The current work employs thermal cycling under constant bias stresses below those critical levels. This comparative study of cast versus deformation-processed NiTiNb alloys contrasts the strain-temperature responses in terms of forward Δ T F = M s - M f and reverse Δ T R = A f - A s temperature intervals, the thermal hysteresis, and the recovery ratio. The results underscore that the deformation-processed microstructure inherently promotes irreversibility and differential forward and reverse transformation pathways.

  5. Magnetic properties of doped Mn-Ga alloys made by mechanical milling and heat treatment

    Directory of Open Access Journals (Sweden)

    Daniel R. Brown

    2016-05-01

    Full Text Available Mn-Ga alloys have shown hard magnetic properties, even though these alloys contain no rare-earth metals. However, much work is needed before rare-earth magnets can be replaced. We have examined the magnetic properties of bulk alloys made with partial replacement of both the Mn and Ga elements in the Mn0.8Ga0.2 system. Bulk samples of Mn-Ga-Bi, Mn-Ga-Al, Mn-Fe-Ga and Mn-(FeB-Ga alloys were fabricated and studied using mechanically milling and heat treatments while altering the atomic percentage of the third element between 2.5 and 20 at%. The ternary alloy exhibits all hard magnetic properties at room temperature with large coercivity. Annealed Mn-Ga-X bulk composites exhibit high coercivities up to 16.6 kOe and remanence up to 9.8 emu/g, that is increased by 115% over the binary system.

  6. Magnetic properties of doped Mn-Ga alloys made by mechanical milling and heat treatment

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Daniel R. [Department of Material Science and Engineering, Florida State University, Tallahassee, FL 32304 (United States); National High Magnetic Field Laboratory, Tallahassee, FL 32310 (United States); Han, Ke; Niu, Rongmei [National High Magnetic Field Laboratory, Tallahassee, FL 32310 (United States); Siegrist, Theo; Besara, Tiglet [Department of Material Science and Engineering, Florida State University, Tallahassee, FL 32304 (United States); Department of Chemical Engineering, Florida Agricultural and Mechanical University-Florida State University, Tallahassee, FL 32304 (United States)

    2016-05-15

    Mn-Ga alloys have shown hard magnetic properties, even though these alloys contain no rare-earth metals. However, much work is needed before rare-earth magnets can be replaced. We have examined the magnetic properties of bulk alloys made with partial replacement of both the Mn and Ga elements in the Mn{sub 0.8}Ga{sub 0.2} system. Bulk samples of Mn-Ga-Bi, Mn-Ga-Al, Mn-Fe-Ga and Mn-(FeB)-Ga alloys were fabricated and studied using mechanically milling and heat treatments while altering the atomic percentage of the third element between 2.5 and 20 at%. The ternary alloy exhibits all hard magnetic properties at room temperature with large coercivity. Annealed Mn-Ga-X bulk composites exhibit high coercivities up to 16.6 kOe and remanence up to 9.8 emu/g, that is increased by 115% over the binary system.

  7. TA [B] Predicting Microstructure-Creep Resistance Correlation in High Temperature Alloys over Multiple Time Scales

    Energy Technology Data Exchange (ETDEWEB)

    Tomar, Vikas [Purdue Univ., West Lafayette, IN (United States)

    2017-03-06

    DoE-NETL partnered with Purdue University to predict the creep and associated microstructure evolution of tungsten-based refractory alloys. Researchers use grain boundary (GB) diagrams, a new concept, to establish time-dependent creep resistance and associated microstructure evolution of grain boundaries/intergranular films GB/IGF controlled creep as a function of load, environment, and temperature. The goal was to conduct a systematic study that includes the development of a theoretical framework, multiscale modeling, and experimental validation using W-based body-centered-cubic alloys, doped/alloyed with one or two of the following elements: nickel, palladium, cobalt, iron, and copper—typical refractory alloys. Prior work has already established and validated a basic theory for W-based binary and ternary alloys; the study conducted under this project extended this proven work. Based on interface diagrams phase field models were developed to predict long term microstructural evolution. In order to validate the models nanoindentation creep data was used to elucidate the role played by the interface properties in predicting long term creep strength and microstructure evolution.

  8. Microstructure and Tribological Properties of Mo–40Ni–13Si Multiphase Intermetallic Alloy

    Science.gov (United States)

    Song, Chunyan; Wang, Shuhuan; Gui, Yongliang; Cheng, Zihao; Ni, Guolong

    2016-01-01

    Intermetallic compounds are increasingly being expected to be utilized in tribological environments, but to date their implementation is hindered by insufficient ductility at low and medium temperatures. This paper presents a novel multiphase intermetallic alloy with the chemical composition of Mo–40Ni–13Si (at %). Microstructure characterization reveals that a certain amount of ductile Mo phases formed during the solidification process of a ternary Mo–Ni–Si molten alloy, which is beneficial to the improvement of ductility of intermetallic alloys. Tribological properties of the designed alloy—including wear resistance, friction coefficient, and metallic tribological compatibility—were evaluated under dry sliding wear test conditions at room temperature. Results suggest that the multiphase alloy possesses an excellent tribological property, which is attributed to unique microstructural features and thereby a good combination in hardness and ductility. The corresponding wear mechanism is explained by observing the worn surface, subsurface, and wear debris of the alloy, which was found to be soft abrasive wear. PMID:28774106

  9. Study the microstructure of three and four component phases in Al-Ni-Fe-La alloys

    KAUST Repository

    Kolobylina, Natalia

    2016-12-21

    Aluminium alloys play a key role in modern engineering since they are the most used non-ferrous material. They have been widely used in automotive, aerospace, and construction engineering due to their good corrosion resistance, superior mechanical properties along with good machinability, weldability, and relatively low cost. The progress in practical application has been determined by intensive research and development works on the Al alloys. A new class of Al–REM–TM aluminum alloys (REM indicates rare earth metal and TM is transition metal) was revealed in the end of the last century. These alloys differ from conventional ones by their extraordinary ability to form metal glasses and nanoscale composites in a wide range of compositions. Having low density, these alloys possess unique mechanical characteristics and corrosion resistance. Two as received alloys, namely Al85Ni9Fe2La4 and Al85Ni7Fe4La4 were obtained in the form of ingots from melts of corresponding compositions upon cooling in air were studied by scanning/transmission electron microscopy (STEM), energy dispersive X-ray (EDX) microanalysis and X-ray diffraction (XRD). The microstructural analyses were performed in a aberration corrected TITAN 80-300 TEM/STEM (FEI, USA) attached with EDX spectrometer with ultrathin window (EDAX, USA). The specimens for transmission electron microscopy (TEM) were prepared by an electrochemical or ion etching. It was found that the received alloys exhibits along with fcc Al and Al4La (Al11La3) particles, these alloys contain a ternary phase Al3Ni1 Fe isostructural to the Al3Ni phase and a quaternary phase Al8Fe2 NiLa isostructural to the Al8Fe2Eu phase and monoclinic phase Al9(Fe,Ni)2 isostructural to the Al9Co2. The study by HRSTEM together with a new atomic resolution energy dispersive X-ray microanalysis method demonstrated that Fe and Ni atoms substituted one another in the Al8Fe2–NiLa quaternary compound. Besides, several types of defects were determined: first

  10. Brazing dissimilar aluminum alloys

    Science.gov (United States)

    Dalalian, H.

    1979-01-01

    Dip-brazing process joins aluminum castings to aluminum sheet made from different aluminum alloy. Process includes careful cleaning, surface preparation, and temperature control. It causes minimum distortion of parts.

  11. A novel, efficient CNTFET Galois design as a basic ternary-valued logic field.

    Science.gov (United States)

    Keshavarzian, Peiman; Mirzaee, Mahla Mohammad

    2012-01-01

    This paper presents arithmetic operations, including addition and multiplication, in the ternary Galois field through carbon nanotube field-effect transistors (CNTFETs). Ternary logics have received considerable attention among all the multiple-valued logics. Multiple-valued logics are an alternative to common-practice binary logic, which mostly has been expanded from ternary (three-valued) logic. CNTFETs are used to improve Galois field circuit performance. In this study, a novel design technique for ternary logic gates based on CNTFETs was used to design novel, efficient Galois field circuits that will be compared with the existing resistive-load CNTFET circuit designs. In this paper, by using carbon nanotube technology and avoiding the use of resistors, we will reduce power consumption and delay, and will also achieve a better product. Simulation results using HSPICE illustrate substantial improvement in speed and power consumption.

  12. Serpentine diffusion trajectories and the Ouzo effect in partially miscible ternary liquid mixtures

    NARCIS (Netherlands)

    Krishna, R.

    2015-01-01

    This work investigates the transient equilibration process when partially miscible ternary liquid mixtures of two different compositions are brought into contact with each other. Diffusional coupling effects are shown to become increasingly significant as the mixture compositions approach the

  13. Thermodynamic optimization and phase equilibria in the ternary system Ni–Sn–Zn

    Energy Technology Data Exchange (ETDEWEB)

    Gandova, V., E-mail: gandova_71@abv.bg [University of Food Technologies, Inorganic and Physical Chemistry Department, 26 Mariza avenue, 4000 Plovdiv (Bulgaria); Vassilev, G.P. [University of Plovdiv, Faculty of Chemistry, 24 Tsar Asen str., 4000 Plovdiv (Bulgaria)

    2014-10-01

    Highlights: • Thermodynamic description of the Ni–Sn–Zn system was obtained. • Six isothermal sections were calculated. • Third constituents solubility in binary phases’ extensions were taken into account. • Good correlation between calculated and experimental data was obtained. - Abstract: Recent experimental results obtained by differential scanning calorimetry, Scanning Electron Microscopy and other methods were used to develop a thermodynamic description of the ternary system Ni–Sn–Zn. Four ternary non-stoichiometric compounds (T1–T4), mentioned in the literature, were described using three-sublattice models. Previously known optimizations of the binary subsystems were remodeled to comply with the new experimental data. The solubility of the respective ternary components, i.e., Zn in Ni–Sn phases and Sn in Ni–Zn phases, were taken into account and optimized ternary parameters were derived. Six isothermal sections were calculated using Thermo-Calc software.

  14. A novel ternary quantum-dot cell for solving majority voter gate problem

    Science.gov (United States)

    Tehrani, Mohammad A.; Bahrami, Safura; Navi, Keivan

    2014-03-01

    Since the complementary metal-oxide semiconductor (CMOS) technology has experienced many serious problems in fulfilling the need for more robust and efficient circuits, some emerging nanotechnologies have been introduced as the candidates for replacing CMOS. Quantum-dot cellular automata (QCA) is one of the promising nanotechnology candidates with majority function as its fundamental logic element. It has one implementation in binary QCA and several implantations in ternary QCA, but none of the ternary QCA implementations are as efficient as the binary one. In this paper, a new cell configuration for ternary QCA is proposed which works as well as previous cell configuration. Also, a new design for ternary QCA majority function is proposed which performs faster and occupies less area.

  15. Ternary and Multi-Bit FIR Filter Area-Performance Tradeoffs in FPGA

    Directory of Open Access Journals (Sweden)

    Khalil-Ur-Rahman Dayo

    2013-01-01

    Full Text Available In this paper, performance and area of conventional FIR (Finite Impulse Responce filters versus ternary sigma delta modulated FIR filter is compared in FPGA (Field Programmable Gate Arrays using VHDL (Verilog Description Language. Two different approaches were designed and synthesized at same spectral performance by obtaining a TIR (Target Impulse Response. Both filters were synthesized on adaptive LUT (Look Up Table FPGA device in pipelined and non-pipelined modes. It is shown that the Ternary FIR filter occupies approximately the same area as the corresponding multi-bit filter, but for a given specification, the ternary FIR filter has 32% better performance in non-pipelined and 72% in pipelined mode, compared to its equivalent Multi-Bit filter at its optimum 12-bit coefficient quantization. These promising results shows that ternary logic based (i.e. +1,0,-1 filters can be used for huge chip area savings and higher performance.

  16. Effect of B and Cr on elastic strength and crystal structure of Ni{sub 3}Al alloys under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Raju, S.V., E-mail: sraju@fiu.edu [CeSMEC, Dept. of Mechanical Engr., Florida International University, Miami, FL 33172 (United States); Oni, A.A. [Department of Materials Science and Engr., North Carolina State University, Raleigh, NC 27695 (United States); Godwal, B.K. [Department of Earth and Planetary Sciences, University of California, Berkeley, CA 94720 (United States); Yan, J. [Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA 94730 (United States); Earth and Planetary Sciences Department, University of California, Santa Cruz, CA 95064 (United States); Drozd, V. [CeSMEC, Dept. of Mechanical Engr., Florida International University, Miami, FL 33172 (United States); Srinivasan, S. [Department of Materials Science and Engg., Iowa State University, Iowa, IA (United States); LeBeau, J.M. [Department of Materials Science and Engr., North Carolina State University, Raleigh, NC 27695 (United States); Rajan, K. [Department of Materials Science and Engg., Iowa State University, Iowa, IA (United States); Saxena, S.K. [CeSMEC, Dept. of Mechanical Engr., Florida International University, Miami, FL 33172 (United States)

    2015-01-15

    Highlights: • Ni{sub 3}Al, Ni{sub 3}Al:B and Ni-Al-Cr alloys were prepared by Bridgman-Stockburger technique. • Crystal structures confirmed by XRD and Electron microscopy studies. • Bulk modulus from XRD studies under pressure and Young’s modulus from nano-indentation were determined. • Combining the above results enabled shear modulus and Poisson’s ratio. • K/G ratio suggests that Ni{sub 3}Al doped with B (500 ppm) has the highest hardness with ductility. - Abstract: Samples of Ni{sub 3}Al, Ni{sub 3}Al:B and Ni–Al–Cr super alloys were prepared by directional solidification method and their effect of alloying with ternary elements on the mechanical properties was investigated. In-situ X-ray diffraction studies were carried out on undoped Ni{sub 3}Al, Ni{sub 3}Al:B with boron 500 ppm and Ni–Al–Cr with 7.5 at.% of chromium super alloys at high pressure using diamond anvil cell. The results indicate that micro-alloying with B forms γ′-phase (L1{sub 2} structure), similar to the pure Ni {sub 3}Al, while Ni–Al–Cr alloy consists of γ′ precipitates in a matrix of γ-phase (Ni-FCC structure). The crystal structure of all three alloys was stable up to 20 GPa. Micro alloying with boron increases bulk modulus of Ni{sub 3}Al by 8% whereas alloying with chromium has the opposite effect decreasing the modulus by 11% when compared to undoped alloy. Further, the elastic modulus and hardness of Ni{sub 3}Al, Ni{sub 3}Al:B and Ni–Al–Cr alloys were determined using the nano-indentation technique, in combination with compressibility data which enabled the estimation of shear modulus and Poisson’s ratio of these alloys.

  17. Machining of titanium alloys

    CERN Document Server

    2014-01-01

    This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

  18. Pareto-optimal alloys

    DEFF Research Database (Denmark)

    Bligaard, Thomas; Johannesson, Gisli Holmar; Ruban, Andrei

    2003-01-01

    and the cost. In this letter we present a database consisting of the lattice parameters, bulk moduli, and heats of formation for over 64 000 ordered metallic alloys, which has been established by direct first-principles density-functional-theory calculations. Furthermore, we use a concept from economic theory......, the Pareto-optimal set, to determine optimal alloy solutions for the compromise between low compressibility, high stability, and cost....

  19. TOPICAL REVIEW On the glass forming ability of liquid alloys

    Directory of Open Access Journals (Sweden)

    Yoshio Waseda et al

    2008-01-01

    Full Text Available By using the concepts of the short-range order (SRO and middle-range order (MRO characterizing structures, an attempt has been made to describe the glass forming ability (GFA of liquid alloys. This includes the effect of more than two kinds of SRO in the liquid caused by the addition of second and third elements to a metallic solvent. The minimum solute concentration is related to the atomic volume mismatch estimated from the cube of the atomic radius. The optimum solute concentration for good glass formability in several binary and some ternary alloys is discussed on the basis of the empirical guideline. A new approach to obtaining good GFA of liquid alloys is based on four main factors: (i formation of new SRO and coexistence of two or more kinds of SRO, (ii stabilization of dense random packing structure by restraining the atomic redistribution for initiating the nucleation and growth process, (iii formation of a stable cluster (SC or the MRO by the harmonious coupling of SROs, and (iv difference between SRO characterizing the liquid structure and the near-neighbor environment in the corresponding equilibrium crystalline phases. The use of interaction parameters, widely used in the thermodynamics of multicomponent metallic solutions, is proposed for effectively selecting the third solute element (X3 for enhancing the GFA of a metallic liquid (M containing the second solute (X2. Fe70-B20-(X310 alloys (X3=Cr, W, Nb, Zr and Hf are used for illustration. Two typical model structures denoted by the Bernal and chemical-order types are used in describing the new glass structure as a function of solute concentration.

  20. Binary Ternary Based Nanolaminates Fabricated By Multi Stationary Target PLD (Preprint)

    Science.gov (United States)

    2017-04-04

    AFRL-RX-WP-JA-2017-0306 BINARY- TERNARY BASED NANOLAMINATES FABRICATED BY MULTI-STATIONARY TARGET PLD (PREPRINT) Steven R. Smith...December 2013 – 15 July 2016 4. TITLE AND SUBTITLE BINARY- TERNARY BASED NANOLAMINATES FABRICATED BY MULTI-STATIONARY TARGET PLD (PREPRINT) 5a...energy of 450 mJ per pulse, a galvanometer mirror system and a background pressure of oxygen. Trends in material properties were identified by

  1. Partially fluorinated aarylene polyethers and their ternary blends with PBI and H3PO4

    DEFF Research Database (Denmark)

    Li, Qingfeng; Jensen, Jens Oluf; Pan, Chao

    2008-01-01

    Ternary blend membranes based on sulphonated partially fluorinated arylene polyether, polybenzimidazole (PBI) and phosphoric acid were prepared and characterised as electrolyte for high temperature proton exchange membrane fuel cells. Partially fluorinated arylene polyether was first prepared from......% and modulus of 50 MPa at 150 degrees C. Based on these ternary membranes large MEAs with an active area of 256 cm(2) have been prepared for a 2 kW(el) stack showing good performance and reproducibility....

  2. Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10.

    Science.gov (United States)

    Liu, Tao; Guo, Yuan; Yi, Yuanping; Huo, Lijun; Xue, Xiaonan; Sun, Xiaobo; Fu, Huiting; Xiong, Wentao; Meng, Dong; Wang, Zhaohui; Liu, Feng; Russell, Thomas P; Sun, Yanming

    2016-12-01

    Two different nonfullerene acceptors and one copolymer are used to fabricate ternary organic solar cells (OSCs). The two acceptors show unique interactions that reduce crystallinity and form a homogeneous mixed phase in the blend film, leading to a high efficiency of ≈10.3%, the highest performance reported for nonfullerene ternary blends. This work provides a new approach to fabricate high-performance OSCs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Phase Evolution in the Pd-Ag-CuO Air Braze Filler Metal Alloy System

    Energy Technology Data Exchange (ETDEWEB)

    Darsell, Jens T.; Weil, K. Scott

    2006-08-01

    Palladium was added as a ternary component to a series of copper oxide-silver alloys in an effort to increase the use temperature of these materials for potential ceramic air brazing applications. Phase equilibria in the ternary Pd-Ag-CuO system were investigated via differential scanning calorimetry (DSC) and a series of quenching experiments. Presented here are the latest findings on this system and a construction of the corresponding ternary phase diagram for low-to-moderate additions of palladium. The analysis included samples with higher palladium additions than were studied in the past, as well as an analysis of the composition-temperature trends in the Ag-CuO miscibility gap with palladium addition. It was found that the addition of palladium increases the solidus and liquidus and caused three phase zones to appear as expected by the phase rule. Furthermore, the palladium additions cause the miscibility gap boundary extending from the former binary eutectic to shift to lower silver-to-copper ratios.

  4. Interdiffusion coefficients and atomic mobilities in fcc Cu-Fe-Mn alloys

    Directory of Open Access Journals (Sweden)

    Li J.

    2014-01-01

    Full Text Available In the present work, the interdiffusion coefficients in fcc Cu-Fe-Mn alloys were experimentally determined via a combination of solid/solid diffusion couples, electron probe microanalysis (EPMA technique and Matano-Kirkaldy method. Based on the reliable thermodynamic description of fcc phase in the Cu-Fe-Mn system available in the literature as well as the ternary diffusion coefficients measured in the present work, the atomic mobilities in fcc Cu-Fe-Mn alloys were assessed by utilizing the DICTRA (Diffusion Controlled TRAnsformation software package. The calculated interdiffusion coefficients based on the assessed atomic mobilities agree well with most of the experimental data. The comprehensive comparison between various model-predicted diffusion properties and the measured data, including the concentration penetration profiles, interdiffusion flux profile, and diffusion paths, further verify the reliability of the presently obtained atomic mobilities.

  5. High-throughput heterodyne thermoreflectance: Application to thermal conductivity measurements of a Fe-Si-Ge thin film alloy library

    Science.gov (United States)

    d'Acremont, Quentin; Pernot, Gilles; Rampnoux, Jean-Michel; Furlan, Andrej; Lacroix, David; Ludwig, Alfred; Dilhaire, Stefan

    2017-07-01

    A High-Throughput Time-Domain ThermoReflectance (HT-TDTR) technique was developed to perform fast thermal conductivity measurements with minimum user actions required. This new setup is based on a heterodyne picosecond thermoreflectance system. The use of two different laser oscillators has been proven to reduce the acquisition time by two orders of magnitude and avoid the experimental artefacts usually induced by moving the elements present in TDTR systems. An amplitude modulation associated to a lock-in detection scheme is included to maintain a high sensitivity to thermal properties. We demonstrate the capabilities of the HT-TDTR setup to perform high-throughput thermal analysis by mapping thermal conductivity and interface resistances of a ternary thin film silicide library FexSiyGe100-x-y (20 analysis areas of different ternary alloy compositions.

  6. Silk flame retardant finish by ternary silica sol containing boron and nitrogen

    Science.gov (United States)

    Zhang, Qiang-hua; Chen, Guo-qiang; Xing, Tie-ling

    2017-11-01

    A ternary flame retardant sol system containing Si, B and N was prepared via sol gel method using tetraethoxysilane (TEOS) as a precursor, boric acid (H3BO3) and urea (CO(NH2)2) as flame retardant additives and then applied to silk fabric flame retardant finish. The FT-IR and SEM results showed that the nitrogen-boron-silica ternary sol was successfully prepared and entrapped onto the surface of silk fibers. The limiting oxygen index (LOI) test indicated that the silk fabric treated with 24% boric acid and 6% urea (relative to the TEOS) doped ternary silica sol system performed excellent flame retardancy with the LOI value of 34.6%. Furthermore, in order to endow silk fabric with durable flame retardancy, the silk fabric was pretreated with 1,2,3,4-butanetetracarboxylic acid (BTCA) before the ternary sol system treatment. The BTCA pretreat ment applied to silk could effectively promote the washing durability of the ternary sol, and the LOI value of the treated sample after 10 times washing could still maintain at 30.8% compared with that of 31.0% before washing. Thermo gravimetric (TG), micro calorimeter combustion (MCC) and smoke density test results demonstrated that the thermal stability, heat release and smoke suppression of the nitrogen-boron-silica ternary system decreased somewhat compared with the boron-silica binary flame retardant system.

  7. Effect of Immersion in Simulated Body Fluid on the Mechanical Properties and Biocompatibility of Sintered Fe–Mn-Based Alloys

    Directory of Open Access Journals (Sweden)

    Zhigang Xu

    2016-12-01

    Full Text Available Fe–Mn-based degradable biomaterials (DBMs are promising candidates for temporary implants such as cardiovascular stents and bone fixation devices. Identifying their mechanical properties and biocompatibility is essential to determine the feasibility of Fe–Mn-based alloys as DBMs. This study presents the tensile properties of two powder metallurgical processed Fe–Mn-based alloys (Fe–28Mn and Fe–28Mn-3Si, in mass percent as a function of immersion time in simulated body fluid (SBF. In addition, short-term cytotoxicity testing was performed to evaluate the in vitro biocompatibility of the sintered Fe–Mn-based alloys. The results reveal that an increase in immersion duration deteriorated the tensile properties of both the binary and ternary alloys. The tensile properties of the immersed alloys were severely degraded after being soaked in SBF for ≥45 days. The ion concentration in SBF released from the Fe–28Mn-3Si samples was higher than their Fe–28Mn counterparts after 7 days immersion. The preliminary cytotoxicity testing based on the immersed SBF medium after 7 days immersion suggested that both the Fe–28Mn-3Si and Fe–28Mn alloys presented a good biocompatibility in Murine fibroblast cells.

  8. Reduced ternary molybdenum and tungsten sulfides and hydroprocessing catalysis therewith

    Science.gov (United States)

    Hilsenbeck, S.J.; McCarley, R.E.; Schrader, G.L.; Xie, X.B.

    1999-02-16

    New amorphous molybdenum/tungsten sulfides with the general formula M{sup n+}{sub 2x/n}(L{sub 6}S{sub 8})S{sub x}, where L is molybdenum or tungsten and M is a ternary metal, has been developed. Characterization of these amorphous materials by chemical and spectroscopic methods (IR, Raman, PES) shows that the (M{sub 6}S{sub 8}){sup 0} cluster units are present. Vacuum thermolysis of the amorphous Na{sub 2x}(Mo{sub 6}S{sub 8})S{sub x}{hor_ellipsis}yMeOH first produces poorly crystalline NaMo{sub 6}S{sub 8} by disproportionation at 800 C and well-crystallized NaMo{sub 6}S{sub 8} at {>=} 900 C. Ion-exchange of the sodium material in methanol with soluble M{sup 2+} and M{sup 3+} salts (M=Sn, Co, Ni, Pb, La, Ho) produces the M{sup n+}{sub 2x/n}(Mo{sub 6}S{sub 8})S{sub x}{hor_ellipsis}yMeOH compounds. Additionally, the new reduced ternary molybdenum sulfides with the general formula M{sup n+}{sub 2x/n}Mo{sub 6}S{sub 8+x}(MeOH){sub y}[MMOS] (M=Sn, Co, Ni) is an effective hydrodesulfurization (HDS) catalyst both as-prepared and after a variety of pretreatment conditions. Under specified pretreatment conditions with flowing hydrogen gas, the SnMoS type catalyst can be stabilized, and while still amorphous, can be considered as ``Chevrel phase-like`` in that both contain Mo{sub 6}S{sub 8} cluster units. Furthermore, the small cation NiMoS and CoMoS type pretreated catalyst is shown to be very active HDS catalysts with rates that exceeded the model unpromoted and cobalt-promoted MoS{sub 2} catalysts. 9 figs.

  9. Formation and Disruption of W-Phase in High-Entropy Alloys

    Directory of Open Access Journals (Sweden)

    Sephira Riva

    2016-05-01

    Full Text Available High-entropy alloys (HEAs are single-phase systems prepared from equimolar or near-equimolar concentrations of at least five principal elements. The combination of high mixing entropy, severe lattice distortion, sluggish diffusion and cocktail effect favours the formation of simple phases—usually a bcc or fcc matrix with minor inclusions of ordered binary intermetallics. HEAs have been proposed for applications in which high temperature stability (including mechanical and chemical stability under high temperature and high mechanical impact is required. On the other hand, the major challenge to overcome for HEAs to become commercially attractive is the achievement of lightweight alloys of extreme hardness and low brittleness. The multicomponent AlCrCuScTi alloy was prepared and characterized using powder X-ray diffraction (PXRD, scanning-electron microscope (SEM and atomic-force microscope equipped with scanning Kelvin probe (AFM/SKP techniques. Results show that the formation of complex multicomponent ternary intermetallic compounds upon heating plays a key role in phase evolution. The formation and degradation of W-phase, Al2Cu3Sc, in the AlCrCuScTi alloy plays a crucial role in its properties and stability. Analysis of as-melted and annealed alloy suggests that the W-phase is favoured kinetically, but thermodynamically unstable. The disruption of the W-phase in the alloy matrix has a positive effect on hardness (890 HV, density (4.83 g·cm−3 and crack propagation. The hardness/density ratio obtained for this alloy shows a record value in comparison with ordinary heavy refractory HEAs.

  10. Large-Grain Tin-Rich Perovskite Films for Efficient Solar Cells via Metal Alloying Technique.

    Science.gov (United States)

    Tavakoli, Mohammad Mahdi; Zakeeruddin, Shaik Mohammed; Grätzel, Michael; Fan, Zhiyong

    2018-01-24

    Fast research progress on lead halide perovskite solar cells has been achieved in the past a few years. However, the presence of lead (Pb) in perovskite composition as a toxic element still remains a major issue for large-scale deployment. In this work, a novel and facile technique is presented to fabricate tin (Sn)-rich perovskite film using metal precursors and an alloying technique. Herein, the perovskite films are formed as a result of the reaction between Sn/Pb binary alloy metal precursors and methylammonium iodide (MAI) vapor in a chemical vapor deposition process carried out at 185 °C. It is found that in this approach the Pb/Sn precursors are first converted to (Pb/Sn)I2 and further reaction with MAI vapor leads to the formation of perovskite films. By using Pb-Sn eutectic alloy, perovskite films with large grain sizes up to 5 µm can be grown directly from liquid phase metal. Consequently, using an alloying technique and this unique growth mechanism, a less-toxic and efficient perovskite solar cell with a power conversion efficiency (PCE) of 14.04% is demonstrated, while pure Sn and Pb perovskite solar cells prepared in this manner yield PCEs of 4.62% and 14.21%, respectively. It is found that this alloying technique can open up a new direction to further explore different alloy systems (binary or ternary alloys) with even lower melting point. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Impact toughness of laser alloyed aluminium AA1200 alloys

    CSIR Research Space (South Africa)

    Mabhali, Luyolo AB

    2013-08-01

    Full Text Available Laser surface alloying of aluminium AA1200 was performed with a 4kW Nd:YAG laser and impact resistance of the alloys was investigated. The alloying powders were a mixture of Ni, Ti and SiC in different proportions. Surfaces reinforced...

  12. THERMODYNAMICS AND KINETICS OF PHASE TRANSFORMATIONS IN PLUTONIUM ALLOYS - PART I

    Energy Technology Data Exchange (ETDEWEB)

    Turchi, P A; Kaufman, L; Liu, Z; Zhou, S

    2004-08-18

    In this report we investigate order, stability, and phase transformations for a series of actinide-based alloys. The statics and kinetics of precipitation and ordering in this class of alloys are modeled with a scheme that couples fundamental information on the alloy energetics obtained from experimental and assessed thermo-chemical data to the CALPHAD approach commonly used in industry for designing alloys with engineering specificity with the help of the Thermo-Calc software application. The CALPHAD approach is applied to the study of the equilibrium thermodynamic properties of Pu-based alloys, Pu-X, where X=Al, Fe, Ga. The assessment of the equilibrium phase diagrams in the whole range of alloy composition has been performed with the PARROT module of the Thermo-Calc application software. Predictions are made on the low temperature and Pu-rich side of the phase diagrams of Pu-Ga and Pu-Al for which controversy has been noted in the past. The validity of the assessed thermo-chemical database will be discussed by comparing predicted heats of transformation for pure Pu with measured values from differential scanning calorimetry analysis. An overall picture for the stability properties of Pu-Ga and Pu-Al that reconciles the results of past studies carried out on these alloys is proposed. Results on phase stability in the ternary Fe-Ga-Pu and Al-Fe-Pu alloys are discussed. The information collected in this study is then used to model metastability, long-term stability and aging for this class of alloys by coupling Thermo-Calc with DICTRA, a series of modules that allow the analysis of DIffusion Controlled TRAnsformations. Kinetics information is then summarized in so-called TTT (temperature-time-transformations) diagrams for the most relevant phases of actinide alloys. Specifically, results are presented on kinetics of phase transformations associated with the eutectoid-phase decomposition reaction occurring at low temperature, and with the martensitic transformation

  13. INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

    Directory of Open Access Journals (Sweden)

    Berat Barıs BULDUM

    2013-01-01

    Full Text Available Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attractive to designers due to their low density, only two thirds that of aluminium and its alloys [1]. The element and its alloys take a big part of modern industry needs. Especially nowadays magnesium alloys are used in automotive and mechanical (trains and wagons manufacture, because of its lightness and other features. Magnesium and magnesium alloys are the easiest of all metals to machine, allowing machining operations at extremely high speed. All standard machining operations such as turning, drilling, milling, are commonly performed on magnesium parts.

  14. The Effect of Impurities on the Processing of Aluminum Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zi-Kui Liu; Shengjun Zhang; Qingyou Han; Vinod Sikka

    2007-04-23

    For this Aluminum Industry of the Future (IOF) project, the effect of impurities on the processing of aluminum alloys was systematically investigated. The work was carried out as a collaborative effort between the Pennsylvania State University and Oak Ridge National Laboratory. Industrial support was provided by ALCOA and ThermoCalc, Inc. The achievements described below were made. A method that combines first-principles calculation and calculation of phase diagrams (CALPHAD) was used to develop the multicomponent database Al-Ca-K-Li-Mg-Na. This method was extensively used in this project for the development of a thermodynamic database. The first-principles approach provided some thermodynamic property data that are not available in the open literature. These calculated results were used in the thermodynamic modeling as experimental data. Some of the thermodynamic property data are difficult, if not impossible, to measure. The method developed and used in this project allows the estimation of these data for thermodynamic database development. The multicomponent database Al-Ca-K-Li-Mg-Na was developed. Elements such as Ca, Li, Na, and K are impurities that strongly affect the formability and corrosion behavior of aluminum alloys. However, these impurity elements are not included in the commercial aluminum alloy database. The process of thermodynamic modeling began from Al-Na, Ca-Li, Li-Na, K-Na, and Li-K sub-binary systems. Then ternary and higher systems were extrapolated because of the lack of experimental information. Databases for five binary alloy systems and two ternary systems were developed. Along with other existing binary and ternary databases, the full database of the multicomponent Al-Ca-K-Li-Mg-Na system was completed in this project. The methodology in integrating with commercial or other aluminum alloy databases can be developed. The mechanism of sodium-induced high-temperature embrittlement (HTE) of Al-Mg is now understood. Using the thermodynamic

  15. Biocatalysis of immobilized chlorophyllase in a ternary micellar system.

    Science.gov (United States)

    Gaffar, R; Kermasha, S; Bisakowski, B

    1999-09-24

    The immobilization of chlorophyllase was optimized by physical adsorption on various inorganic supports, including alumina, celite, Dowex-1-chloride, glass beads and silica gel. The enzyme was also immobilized in different media, including water, Tris-HCl buffer solution and a ternary micellar system containing Tris-HCl buffer solution, hexane and surfactant. The highest immobilization efficiency (84.56%) and specific activity (0.34 mumol hydrolyzed chlorophyll mg protein-1 per min) were obtained when chlorophyllase was suspended in Tris-HCl buffer solution and adsorbed onto silica gel. The effect of different ratios of chlorophyllase to the support and the optimum incubation time for the immobilization of chlorophyllase were determined to be 1-4 and 60 min, respectively. The experimental results showed that the optimum pH and temperature for the immobilized chlorophyllase were 8.0 and 35 degrees C, respectively. The use of optimized amounts of selected membrane lipids increased the specific activity of the immobilized chlorophyllase by approximately 50%. The enzyme kinetic studies indicated that the immobilized chlorophyllase showed a higher affinity towards chlorophyll than pheophytin as substrate.

  16. Delay Insensitive Ternary CMOS Logic for Secure Hardware

    Directory of Open Access Journals (Sweden)

    Ravi S. P. Nair

    2015-09-01

    Full Text Available As digital circuit design continues to evolve due to progress of semiconductor processes well into the sub 100 nm range, clocked architectures face limitations in a number of cases where clockless asynchronous architectures generate less noise and produce less electro-magnetic interference (EMI. This paper develops the Delay-Insensitive Ternary Logic (DITL asynchronous design paradigm that combines design aspects of similar dual-rail asynchronous paradigms and Boolean logic to create a single wire per bit, three voltage signaling and logic scheme. DITL is compared with other delay insensitive paradigms, such as Pre-Charge Half-Buffers (PCHB and NULL Convention Logic (NCL on which it is based. An application of DITL is discussed in designing secure digital circuits resistant to side channel attacks based on measurement of timing, power, and EMI signatures. A Secure DITL Adder circuit is designed at the transistor level, and several variance parameters are measured to validate the efficiency of DITL in resisting side channel attacks. The DITL design methodology is then applied to design a secure 8051 ALU.

  17. Multistate Memristive Tantalum Oxide Devices for Ternary Arithmetic

    Science.gov (United States)

    Kim, Wonjoo; Chattopadhyay, Anupam; Siemon, Anne; Linn, Eike; Waser, Rainer; Rana, Vikas

    2016-11-01

    Redox-based resistive switching random access memory (ReRAM) offers excellent properties to implement future non-volatile memory arrays. Recently, the capability of two-state ReRAMs to implement Boolean logic functionality gained wide interest. Here, we report on seven-states Tantalum Oxide Devices, which enable the realization of an intrinsic modular arithmetic using a ternary number system. Modular arithmetic, a fundamental system for operating on numbers within the limit of a modulus, is known to mathematicians since the days of Euclid and finds applications in diverse areas ranging from e-commerce to musical notations. We demonstrate that multistate devices not only reduce the storage area consumption drastically, but also enable novel in-memory operations, such as computing using high-radix number systems, which could not be implemented using two-state devices. The use of high radix number system reduces the computational complexity by reducing the number of needed digits. Thus the number of calculation operations in an addition and the number of logic devices can be reduced.

  18. The role of In in III-nitride ternary semiconductors

    CERN Multimedia

    Redondo cubero, A

    This proposal aims to study the role of In in the outstanding efficiency of luminescent devices based on group III-nitride ternary semiconductors. To study the microscopic environments of In in GaInN and AlInN, Perturbed Angular Correlation (PAC) experiments will be performed using the PAC-probes $^{111m}$Cd($^{111}$Cd), $^{115}$Cd($^{115}$In) and $^{117}$Cd($^{117}$In). Temperature dependent PAC measurements using the $^{111}$In($^{111}$Cd) probe indicated that In in GaN and AlN forms a complex with a defect, possibly a nitrogen vacancy (V$_{N}$), which is stable up to high temperatures and might be involved in the luminescence mechanisms. Analysing these results two questions arose: \\\\ \\\\1. Does the fact that the actual measurement is performed with the daughter nucleus $^{111}$Cd (being an acceptor) influence the probe-defect interaction? This question can be answered by performing measurements with the complementary probe $^{117}$Cd($^{117}$In). \\\\ \\\\ 2. What is the significance of $\\textit{a...

  19. Control mechanism of double-rotator-structure ternary optical computer

    Science.gov (United States)

    Kai, SONG; Liping, YAN

    2017-03-01

    Double-rotator-structure ternary optical processor (DRSTOP) has two characteristics, namely, giant data-bits parallel computing and reconfigurable processor, which can handle thousands of data bits in parallel, and can run much faster than computers and other optical computer systems so far. In order to put DRSTOP into practical application, this paper established a series of methods, namely, task classification method, data-bits allocation method, control information generation method, control information formatting and sending method, and decoded results obtaining method and so on. These methods form the control mechanism of DRSTOP. This control mechanism makes DRSTOP become an automated computing platform. Compared with the traditional calculation tools, DRSTOP computing platform can ease the contradiction between high energy consumption and big data computing due to greatly reducing the cost of communications and I/O. Finally, the paper designed a set of experiments for DRSTOP control mechanism to verify its feasibility and correctness. Experimental results showed that the control mechanism is correct, feasible and efficient.

  20. Growth Mechanism of Nanowires: Binary and Ternary Chalcogenides

    Science.gov (United States)

    Singh, N. B.; Coriell, S. R.; Su, Ching-Hua; Hopkins, R. H.; Arnold, B.; Choa, Fow-Sen; Cullum, Brian

    2016-01-01

    Semiconductor nanowires exhibit very exciting optical and electrical properties including high transparency and a several order of magnitude better photocurrent than thin film and bulk materials. We present here the mechanism of nanowire growth from the melt-liquid-vapor medium. We describe preliminary results of binary and ternary selenide materials in light of recent theories. Experiments were performed with lead selenide and thallium arsenic selenide systems which are multifunctional material and have been used for detectors, acousto-optical, nonlinear and radiation detection applications. We observed that small units of nanocubes and elongated nanoparticles arrange and rearrange at moderate melt undercooling to form the building block of a nanowire. Since we avoided the catalyst, we observed self-nucleation and uncontrolled growth of wires from different places. Growth of lead selenide nanowires was performed by physical vapor transport method and thallium arsenic selenide nanowire by vapor-liquid-solid (VLS) method. In some cases very long wires (>mm) are formed. To achieve this goal experiments were performed to create situation where nanowires grew on the surface of solid thallium arsenic selenide itself.

  1. The role of intermetallic phases in the corrosion of magnesium-rare earth alloys

    Energy Technology Data Exchange (ETDEWEB)

    Silva Campos, Maria del Rosario

    2016-07-25

    A new concept to develop a RE based Mg alloy with improved corrosion resistance was followed in the current work. Based on subsequent characterisation steps to eliminate less suitable RE elements the best microstructure for improved corrosion resistance was identified. At first, the corrosion properties of selected RE elements were determined. Based on these results RE elements that have a potential to enhance the corrosion resistance of Mg-RE alloys were selected. Two aspects of RE elements were important for the selection: the electrochemical properties and the solid solubility in Mg. If the solubility limit of RE elements in the Mg matrix is exceeded, they form intermetallic phases with Mg. By performing galvanic coupling measurements the compatibility between Mg matrix and intermetallic phases were estimated. At that point three binary Mg-RE alloys systems remained (Mg-Ce, Mg-La, and Mg-Gd). To evaluate the influence of composition (amount of intermetallic phases) on the corrosion behaviour, four concentrations were cast with 1, 5, 10 and 15 wt. % of RE. Ce and La have a lower solid solubility in Mg matrix generating higher volume fraction of the secondary phases, thus higher dissolution rates in the binary Mg-RE alloys. While Gd with higher solid solubility shows a different behaviour. Additions of up to 10 wt. % Gd resulted in similar behaviour compared to 1 wt. % Gd addition. The most promising results were obtained for the Mg-Gd system with 10 wt. % Gd. Thus, the microstructure of this alloy was further modified by heat treatments to understand the influence of microstructural changes on corrosion behaviour. A ternary element was used to attempt further optimisation of the corrosion performance. Additions of Al, Zn, Ga and Y did not show any improvement in the corrosion resistance of Mg10Gd. This is due to increasing volume fractions of critical more noble phases and the microstructure dominated by eutectic phase formation. Thus galvanic effects became much

  2. Computational thermodynamics and kinetics of displacive transformations in titanium-based alloys

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Jia-Yi, E-mail: jiayiyan@kth.se [Department of Materials Science and Engineering, KTH Royal Institute of Technology, Brinellvägen 23, SE-100 44, Stockholm (Sweden); Olson, G.B., E-mail: g-olson@northwestern.edu [Department of Materials Science and Engineering, Northwestern University, 2220 Campus Drive, Evanston, IL, 60208-3108 (United States)

    2016-07-15

    The thermodynamics of Ti-based systems are described for β–α′/α″ martensitic transformation and athermal ω formation at low temperatures. The new descriptions can better represent the relationship between the partitionless equilibrium temperature and the measured martensite-formation/reversion temperatures. The anomalous β-stabilizing effects of Al, Sn, and Zr in ternary Ti–V/Nb-based alloys are well modeled for the first time. The Gibbs energy function of ω–Ti at ambient pressure is assessed. The formation temperature of athermal ω phase is assessed in some binary systems and estimated in some ternary systems based on electrical resistivity and first-principles calculations. The critical driving force for heterogeneous martensitic nucleation is modeled by solution-hardening interfacial friction using the present thermodynamic descriptions. The competition between martensite and athermal ω phase can be understood based on their transformation thermodynamic and kinetic factors. - Highlights: • The thermodynamics of low-temperature displacive transformations in Ti-based systems are described. • The anomalous β-stabilizing effects of Al, Sn, and Zr are correctly modeled for the first time in Ti–V/Nb-based systems. • The critical driving force of martensitic nucleation in Ti-based alloy is modeled by solution-hardening interfacial friction.

  3. Correlating radiation exposure with embrittlement: Comparative studies of electron- and neutron-irradiated pressure vessel alloys

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, D. E.; Rehn, L. E.; Odette, G. R.; Lucas, G. E.; Klingensmith, D.; Gragg, D.

    1999-12-22

    Comparative experiments using high energy (10 MeV) electrons and test reactor neutrons have been undertaken to understand the role that primary damage state has on hardening (embrittlement) induced by irradiation at 300 C. Electrons produce displacement damage primarily by low energy atomic recoils, while fast neutrons produce displacements from considerably higher energy recoils. Comparison of changes resulting from neutron irradiation, in which nascent point defect clusters can form in dense cascades, with electron irradiation, where cascade formation is minimized, can provide insight into the role that the in-cascade point defect clusters have on the mechanisms of embrittlement. Tensile property changes induced by 10 MeV electrons or test reactor neutron irradiations of unalloyed iron and an Fe-O.9 wt.% Cu-1.0 wt.% Mn alloy were examined in the damage range of 9.0 x 10{sup {minus}5} dpa to 1.5 x 10{sup {minus}2} dpa. The results show the ternary alloy experienced substantially greater embrittlement in both the electron and neutron irradiate samples relative to unalloyed iron. Despite their disparate nature of defect production similar embrittlement trends with increasing radiation damage were observed for electrons and neutrons in both the ternary and unalloyed iron.

  4. Structural thermodynamics of alloys

    CERN Document Server

    Manenc, Jack

    1973-01-01

    Technical progress has for a very long time been directly dependent on progress in metallurgy, which is itself connected with improvements in the technology of alloys. Metals are most frequently used in the form of alloys for several reasons: the quantity of pure metal in its native state in the earth's crust is very limited; pure metals must be extracted from ores which are themselves impure. Finally, the methods of treatment used lead more easily to alloys than to pure metals. The most typical case is that of iron, where a pure ore may be found, but which is the starting point for cast iron or steel, alloys of iron and carbon. In addition, the properties of alloys are in general superior to those of pure metals and modem metallurgy consists of controlling these properties so as to make them conform to the requirements of the design office. Whilst the engineer was formerly compelled to adapt his designs and constructions to the materials available, such as wood, stone, bronze, iron, cast iron and ordinary st...

  5. INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

    OpenAIRE

    Berat Barıs BULDUM; Aydın SIK; Iskender OZKUL

    2013-01-01

    Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attra...

  6. Geometric modelling of viscosity of copper-containing liquid alloys

    Science.gov (United States)

    Dogan, Ali; Arslan, Hüseyin

    2016-02-01

    In this work, viscosities of ternary Au-Ag-Cu and Al-Cu-Si liquid alloys have been calculated as a function of gold, aluminium and copper compositions for the sections Au-Ag-Cu (xAg/xCu = 0.543 at 1373 K), Alx(Cu50-Si50)(1-x) and Cux(Al50-Si50)(1-x) at 1375 K using Chou's general solution model, Muggianu, Kohler, Toop, Hillert, Budai et al., Kozlov et al., Schick et al. and Kaptay et al. models. The present study finds that a comparison of the predicted values of viscosities associated with the geometric and physical models indicate good mutual agreement. The Muggianu model indicates the best agreement with the results obtained for Au-Ag-Cu and Alx-Cu50-Si50 alloy systems and the Kaptay et al. model, which is a physical model, indicates the best agreement with the results obtained for Al50-Cux-Si50.

  7. Microstructural characterization of as-cast hf-b alloys

    Directory of Open Access Journals (Sweden)

    João Carlos Jânio Gigolotti

    2012-04-01

    Full Text Available An accurate knowledge of several metal-boron phase diagrams is important to evaluation of higher order systems such as metal-silicon-boron ternaries. The refinement and reassessment of phase diagram data is a continuous work, thus the reevaluation of metal-boron systems provides the possibility to confirm previous data from an investigation using higher purity materials and better analytical techniques. This work presents results of rigorous microstructural characterization of as-cast hafnium-boron alloys which are significant to assess the liquid composition associated to most of the invariant reactions of this system. Alloys were prepared by arc melting high purity hafnium (minimum 99.8% and boron (minimum 99.5% slices under argon atmosphere in water-cooled copper crucible with non consumable tungsten electrode and titanium getter. The phases were identified by scanning electron microscopy, using back-scattered electron image mode and X-ray diffraction. In general, a good agreement was found between our data and those from the currently accepted Hafnium-Boron phase diagram. The phases identified are αHfSS and B-RhomSS, the intermediate compounds HfB and HfB2 and the liquide L. The reactions are the eutectic L ⇔ αHfSS + HfB and L ⇔ HfB2 + B-Rhom, the peritectic L + HfB2 ⇔ HfB and the congruent formation of HfB2.

  8. De-alloyed platinum nanoparticles

    Science.gov (United States)

    Strasser, Peter [Houston, TX; Koh, Shirlaine [Houston, TX; Mani, Prasanna [Houston, TX; Ratndeep, Srivastava [Houston, TX

    2011-08-09

    A method of producing de-alloyed nanoparticles. In an embodiment, the method comprises admixing metal precursors, freeze-drying, annealing, and de-alloying the nanoparticles in situ. Further, in an embodiment de-alloyed nanoparticle formed by the method, wherein the nanoparticle further comprises a core-shell arrangement. The nanoparticle is suitable for electrocatalytic processes and devices.

  9. PdAgAu alloy with high resistance to corrosion by H2S

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Fernando [Inst. de Investigaciones en Catalisis y Petroquimica, Santa Fe (Argentina); Miller, James B. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Gellman, Andrew J. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Tarditi, Ana M. [Inst. de Investigaciones en Catalisis y Petroquimica, Santa Fe (Argentina); Fleutot, Benoit [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; Kondratyuk, Petro [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Cornaglia, Laura M. [Inst. de Investigaciones en Catalisis y Petroquimica, Santa Fe (Argentina)

    2012-12-01

    PdAgAu alloy films were prepared on porous stainless steel supports by sequential electroless deposition. Two specific compositions, Pd83Ag2Au15 and Pd74Ag14Au12, were studied for their sulfur tolerance. The alloys and a reference Pd foil were exposed to 1000 H2S /H2 at 623 K for periods of 3 and 30 hours. The microstructure, morphology and bulk composition of both nonexposed and H2S-exposed samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). XRD and SEM analysis revealed time-dependent growth of a bulk Pd{sub 4}S phase on the Pd foil during H2S exposure. In contrast, the PdAgAu ternary alloys displayed the same FCC structure before and after H2S exposure. In agreement with the XRD and SEM results, sulfur was not detected in the bulk of either ternary alloy samples by EDS, even after 30 hours of H2S exposure. X-ray photoelectron spectroscopy (XPS) depth profiles were acquired for both PdAgAu alloys after 3 and 30 hours of exposure to characterize sulfur contamination near their surfaces. Very low S 2p and S 2s XPS signals were observed at the top-surfaces of the PdAgAu alloys, and those signals disappeared before the etch depth reached ~ 10 nm, even for samples exposed to H2S for 30 hours. The depth profile analyses also revealed silver and gold segregation to the surface of the alloys; preferential location of Au on the alloys surface may be related to their resistance to bulk sulfide formation. In preliminary tests, a PdAgAu alloy membrane displayed higher initial H{sub 2} permeability than a similarly prepared pure Pd sample and, consistent with resistance to bulk sulfide formation, lower permeability loss in H2S than pure Pd.

  10. Development of multilayer perceptron networks for isothermal time temperature transformation prediction of U-Mo-X alloys

    Science.gov (United States)

    Johns, Jesse M.; Burkes, Douglas

    2017-07-01

    In this work, a multilayered perceptron (MLP) network is used to develop predictive isothermal time-temperature-transformation (TTT) models covering a range of U-Mo binary and ternary alloys. The selected ternary alloys for model development are U-Mo-Ru, U-Mo-Nb, U-Mo-Zr, U-Mo-Cr, and U-Mo-Re. These model's ability to predict 'novel' U-Mo alloys is shown quite well despite the discrepancies between literature sources for similar alloys which likely arise from different thermal-mechanical processing conditions. These models are developed with the primary purpose of informing experimental decisions. Additional experimental insight is necessary in order to reduce the number of experiments required to isolate ideal alloys. These models allow test planners to evaluate areas of experimental interest; once initial tests are conducted, the model can be updated and further improve follow-on testing decisions. The model also improves analysis capabilities by reducing the number of data points necessary from any particular test. For example, if one or two isotherms are measured during a test, the model can construct the rest of the TTT curve over a wide range of temperature and time. This modeling capability reduces the cost of experiments while also improving the value of the results from the tests. The reduced costs could result in improved material characterization and therefore improved fundamental understanding of TTT dynamics. As additional understanding of phenomena driving TTTs is acquired, this type of MLP model can be used to populate unknowns (such as material impurity and other thermal mechanical properties) from past literature sources.

  11. Development of multilayer perceptron networks for isothermal time temperature transformation prediction of U-Mo-X alloys

    Energy Technology Data Exchange (ETDEWEB)

    Johns, Jesse M.; Burkes, Douglas

    2017-07-01

    In this work, a multilayered perceptron (MLP) network is used to develop predictive isothermal time-temperature-transformation (TTT) models covering a range of U-Mo binary and ternary alloys. The selected ternary alloys for model development are U-Mo-Ru, U-Mo-Nb, U-Mo-Zr, U-Mo-Cr, and U-Mo-Re. These model’s ability to predict 'novel' U-Mo alloys is shown quite well despite the discrepancies between literature sources for similar alloys which likely arise from different thermal-mechanical processing conditions. These models are developed with the primary purpose of informing experimental decisions. Additional experimental insight is necessary in order to reduce the number of experiments required to isolate ideal alloys. These models allow test planners to evaluate areas of experimental interest; once initial tests are conducted, the model can be updated and further improve follow-on testing decisions. The model also improves analysis capabilities by reducing the number of data points necessary from any particular test. For example, if one or two isotherms are measured during a test, the model can construct the rest of the TTT curve over a wide range of temperature and time. This modeling capability reduces the cost of experiments while also improving the value of the results from the tests. The reduced costs could result in improved material characterization and therefore improved fundamental understanding of TTT dynamics. As additional understanding of phenomena driving TTTs is acquired, this type of MLP model can be used to populate unknowns (such as material impurity and other thermal mechanical properties) from past literature sources.

  12. Investigation of the Precipitation Behavior in Aluminum Based Alloys

    KAUST Repository

    Khushaim, Muna S.

    2015-11-30

    ternary Al-Li-Cu alloys. Atom probe tomography and statistical testing are combined to investigate the fine scale segregation effects of dilute solutes in aluminum alloys. The optimum application of atom probe tomography in a wide range of materials is enabled by the integration of a laser pulse mode in the atom probe analysis. However, the nature of the laser mechanism used during atom probe tomography analyses is still debated. Systematic investigation of the microstructural change of δ′(Al3Li) precipitates influenced by different pulsed laser energies are used to describe the important phenome associated with the laser pulse mode. In this study, atom probe tomography presented a series of snapshots during in-situ reversion of ′(Al3Li) precipitates, initiated by laser irradiation, using different laser energies for the first time. An estimation method to investigate real sample temperatures during laser-APT analyses using an interface reaction itself as a probe has been proposed. Finally, the considerable potential of aluminum liquid is demonstrated as a powerful synthesis solvent of important intermetallic phases such as: Mg2Si, Al2Mg and CaMgSi .The atom probe tomography technique is utilized to characterize the intermediate reaction steps of the flux-grown intermetallic phases. The study proposed a direct approach to investigate the involved reactions during the formation of the synthesized intermetallic phase.

  13. Silumins alloy crystallization

    Directory of Open Access Journals (Sweden)

    S. Pietrowski

    2009-07-01

    Full Text Available This paper presents the results of research, by ATD method, of hypo-, near- and hyperutectic silumins crystallization containing the following alloying additives: Mg, Ni, Cu, Cr, Mo, W, V. It has been shown that, depending on their concentration may crystallize pre-eutectic or eutectic multicomponent phases containing these alloy additives. It has been revealed that any subsequent crystallizable phase nucleate and grows near the liquid/former crystallized phase interface. In multiphases compound also falls the silicon, resulting in a reduction in its quantity and the fragmentation in the eutectic mixture. As a result, it gets a high hardness of silumins in terms of 110-220HB.

  14. Irradiation induced surface segregation in concentrated alloys: a contribution; Contribution a l`etude de la segregation de surface induite par irradiation dans les alliages concentres

    Energy Technology Data Exchange (ETDEWEB)

    Grandjean, Y.

    1996-12-31

    A new computer modelization of irradiation induced surface segregation is presented together with some experimental determinations in binary and ternary alloys. The model we propose handles the alloy thermodynamics and kinetics at the same level of sophistication. Diffusion is described at the atomistic level and proceeds vis the jumps of point defects (vacancies, dumb-bell interstitials): the various jump frequencies depend on the local composition in a manner consistent with the thermodynamics of the alloy. For application to specific alloys, we have chosen the simplest statistical approximation: pair interactions in the Bragg Williams approximation. For a system which exhibits the thermodynamics and kinetics features of Ni-Cu alloys, the model generates the behaviour parameters (flux and temperature) and of alloy composition. Quantitative agreement with the published experimental results (two compositions, three temperatures) is obtained with a single set of parameters. Modelling austenitic steels used in nuclear industry requires taking into account the contribution of dumbbells to mass transport. The effects of this latter contribution are studied on a model of Ni-Fe. Interstitial trapping on dilute impurities is shown to delay or even suppress the irradiation induced segregation. Such an effect is indeed observed in the experiments we report on Fe{sub 50}Ni{sub 50} and Fe{sub 49}Ni{sub 50}Hf{sub 1} alloys. (author). 190 refs.

  15. Predicting Short-Range Order in Multicomponent Alloys from an Improved Mean-Field Theory

    Science.gov (United States)

    Ong, Zhun-Yong; Johnson, Duane

    2007-03-01

    In alloys the atomic short-range order (SRO) indicates the nascent ordering to which the disordered alloy is tending at high temperatures. Direct first-principles prediction based upon KKR-CPA and mean-field thermodynamics have been successful in predicting system-specific SRO [1], if, at a minimum, corrections are included to satisfy the diffuse scattering sum rule in k-space. However, such models do not account for k-dependence of the corrections. Here, we present an analytic generalization to multicomponent alloys that includes ``cyclic diagrams'' [2,3] for composition, temperature, and k-dependent corrections to SRO. We first explore the improvement to SRO in model fcc ternary alloys via the generalized Ising model. We find that there is much better agreement to Monte Carlo simulations than with standard Bragg-Williams with(out) Onsager corrections. Then we implement this within the KKR-CPA linear-response theory of SRO.Work was supported by DOE (Award DEFG02-03ER46026 and NSF (DMR-0325939). [1] J.B. Staunton, D.D. Johnson, and F.J. Pinski, Phys. Rev. Lett. 65, 1259 (1990); Phys. Rev. B 50, 1450 (1994); ibid, 57, 15177 (1998). [2] R. Brout, Phys. Rev. 115, 824-835 (1959). [3] R.V. Chepulski, et al, Phys. Rev. 65, 064201-7 (2002).

  16. Self-passivating bulk tungsten-based alloys manufactured by powder metallurgy

    Science.gov (United States)

    López-Ruiz, P.; Ordás, N.; Lindig, S.; Koch, F.; Iturriza, I.; García-Rosales, C.

    2011-12-01

    Self-passivating tungsten-based alloys are expected to provide a major safety advantage compared to pure tungsten, which is at present the main candidate material for the first wall armour of future fusion reactors. WC10Si10 alloys were manufactured by mechanical alloying (MA) in a Planetary mill and subsequent hot isostatic pressing (HIP), achieving densities above 95%. Different MA conditions were studied. After MA under optimized conditions, a core with heterogeneous microstructure was found in larger powder particles, resulting in the presence of some large W grains after HIP. Nevertheless, the obtained microstructure is significantly refined compared to previous work. First MA trials were also performed on the Si-free system WCr12Ti2.5. In this case a very homogeneous structure inside the powder particles was obtained, and a majority ternary metastable bcc phase was found, indicating that almost complete alloying occurred. Therefore, a very fine and homogeneous microstructure can be expected after HIP in future work.

  17. Optimization of magnetic flux density in electrical steels: Slater-Pauling pattern repetition in multicomponent alloys

    Science.gov (United States)

    Baik, Seung Su; Kwon, S. K.; Min, B. I.

    2012-02-01

    By investigating the magnetization variation of Fe-rich multicomponent alloys with solute concentration, the magnetic flux density of Si electrical steel is optimized with average valency. For binary alloys of Fe-X [X=d-5d transition-metal (TM) and 3sp-6sp elements], the usual mountain-shape behavior of the Slater-Pauling curve is produced even for late 4d-5d TM, and the monotonically decreasing behavior for 3sp-5sp elements. Anomalously, a rise-and-fall pattern is found for the 6sp element of X=Bi. For ternary alloys of Fe-Si-X (X=3d-5d TM and 3sp-6sp elements), the role of Si is shown to shift the starting point of moment variation and the magnetic flux density of Fe-Si-X alloys is found to repeat the Si-absent binary pattern at the shifted reference moment. On the basis of the calculated magnetic moments, Fe-Si-X-Y (X=Co, Pd, Pt and Y=Al, Sb, Bi) is proposed as a viable candidate for the optimum products of electrical steels.

  18. Low-temperature relaxation in NiTi-based shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Torrens-Serra, Joan; Salas, Daniel; Cesari, Eduard; Kustov, Sergey [Departament de Fisica, Universitat de les Illes Balears, cra. de Valldemossa km 7.5, E-07122, Palma de Mallorca (Spain)

    2011-07-01

    We have studied the structural changes occurring in different Ni-Ti and Ni-Ti-Fe alloys over the temperature range from 13 to 300 K by means of mechanical spectroscopy, calorimetry (DSC) and electrical resistivity measurements. Several binary and ternary alloys were used with different thermal and mechanical history, which demonstrate distinct transformation paths: B2-B19', B2-R and B2-R-B19'. Temperature dependence of the internal friction (IF) was studied over the range 90-137 kHz for different strain amplitudes from 3{sup *}10E-7 to 5{sup *}10E-5. In addition to the martensitic and intermartensitic transformations, the IF curves showed a peak at about 90 K in annealed and water-quenched samples independently of their composition which can not be detected by DSC or electrical resistivity measurements. The thermally activated nature of the relaxation has been confirmed using different measurement frequencies. Since the IF peak is observed for ultrasonic frequencies at temperatures of around 90 K, it corresponds to a new relaxation phenomenon, not reported so far in Ni-Ti family of alloys, with the activation energy of the order of only 0.01 eV. On the other hand, no relaxation is found in deformed alloys not subjected to annealing heat treatments. The origin of this relaxation may be attributed to the presence of interstitial hydrogen atoms.

  19. Synthesis and characterization of some binary and ternary zirconium iodides

    Energy Technology Data Exchange (ETDEWEB)

    Guthrie, D.H.

    1981-10-01

    Studies of binary ZrI/sub 4/-Zr and ternary CsI-Zr-ZrI/sub 4/ systems have produced several new compounds. The new binary compounds include two polymorphs of ZrI/sub 2/ (..cap alpha.. and ..beta..) as well as a phase described earlier as ZrI/sub 1/ /sub 8/. ..cap alpha..-ZrI/sub 2/ forms as black lath-like crystals by vapor phase transport reactions between Zr and ZrI/sub 4/ from 700 to 825/sup 0/C. Its structure is monoclinic space group P2/sub 1//m with a = 6.821(2), b = 3.741(1), c = 14.937(3) A and ..beta.. = 95.66(3)/sup 0/, Z = 4 (R = 0.064). ..beta..-ZrI/sub 2/ is formed as black gem-like crystals between 800 to 975/sup 0/C, crystallizing in the trigonal space group R anti 3 with hexagonal axes a = 14.502(2) and c = 9.996(2) A, Z = 18 (R = 0.109). This phase contains a Zr/sub 6/I/sub 12/ cluster. Guinier x-ray powder diffraction data previously reported for ZrI/sub 1/ /sub 8/ has now been found to arise from ..cap alpha..-ZrI/sub 2/ intergrown with an orthorhombic ZrI/sub 2/ phase (perhaps isostructural with WTe/sub 2/ plus an unknown phase. The ternary compounds include Cs/sub 2/ZrI/sub 6/, Cs/sub 3/Zr/sub 2/T/sub 9/ and CsZr/sub 6/I/sub 14/. The first is isostructural with K/sub 2/PtCl/sub 6/. Cs/sub 3/Zr/sub 2/I/sub 9/ is formed from the reaction of CsI, ZrI/sub 4/ and Zr between 700 to 900/sup 0/C as black gem-like crystals which crystallize in the space group P6/sub 3//mmc with a = 8.269(1) and c = 19.908(3) A, z = 2. This phase was found to have a Cs/sub 3/Cr/sub 2/Cl/sub 9/-type structure, d/sub Zr-Zr/ = 3.134(4) A (R = 0.087). CsZr/sub 6/I/sub 14/ forms both rod and gem crystals by the same reaction with more metal between 900 to 950/sup 0/C. It crystallizes in the orthorhombic space group Ccmb with a = 14.275(4), b = 15.880(4) and c = 12.953 (4) A (R = 0.062). This phase also contains a Zr/sub 6/I/sub 12/ cluster.

  20. Investigation of itraconazole ternary amorphous solid dispersions based on povidone and Carbopol.

    Science.gov (United States)

    Meng, Fan; Meckel, Jordan; Zhang, Feng

    2017-08-30

    We investigate a ternary system that consists of itraconazole (ITZ) and two polymers: povidone K12 and Carbopol 907. The interactions between these two polymers and their effects on the properties of ternary ITZ amorphous solid dispersions (ASDs) are studied. These two polymers can form a water-insoluble complex in acidic aqueous media. The critical pH is determined to be 4.17. The weight percentage of Carbopol 907 in the interpolymer complex range from 59 to 70%, depending on the initial ratios between these two polymers in the starting solutions. This complexation is driven by a negative enthalpy change from the H-bonding between the two polymers and a positive entropy change from the freed water molecules. Due to the slow precipitation of the interpolymer complex in aqueous media, the attempt to prepare ternary ASD using solvent-controlled coprecipitation is not successful. Melt extrusion is identified to be the only viable method to prepare this ternary ASD. We find that interpolymer complex-based ASDs are physically less stable and demonstrate the poorest drug-release properties when compared to individual polymer-based binary ASDs. This study illustrates that the too strong interaction between polymers in ternary ASDs is detrimental to their performance. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Heteronanostructured Co@carbon nanotubes-graphene ternary hybrids: synthesis, electromagnetic and excellent microwave absorption properties

    Science.gov (United States)

    Qi, Xiaosi; Hu, Qi; Cai, Hongbo; Xie, Ren; Bai, Zhongchen; Jiang, Yang; Qin, Shuijie; Zhong, Wei; Du, Youwei

    2016-11-01

    In order to explore high efficiency microwave absorption materials, heteronanostructured Co@carbon nanotubes-graphene (Co@CNTs-G) ternary hybrids were designed and produced through catalytic decomposition of acetylene at the designed temperature (400, 450, 500 and 550 °C) over Co3O4/reduced graphene oxide (Co3O4/RGO). By regulating the reaction temperatures, different CNT contents of Co@CNTs-G ternary hybrids could be synthesized. The investigations indicated that the as-prepared heteronanostructured Co@CNTs-G ternary hybrids exhibited excellent microwave absorption properties, and their electromagnetic and microwave absorption properties could be tuned by the CNT content. The minimum reflection loss (RL) value reached approximately -65.6, -58.1, -41.1 and -47.5 dB for the ternary hybrids synthesized at 400, 450, 500 and 550 °C, respectively. And RL values below -20 dB (99% of electromagnetic wave attenuation) could be obtained over the as-prepared Co@CNTs-G ternary hybrids in the large frequency range. Moreover, based on the obtained results, the possible enhanced microwave absorption mechanisms were discussed in details. Therefore, a simple approach was proposed to explore the high performance microwave absorbing materials as well as to expand the application field of graphene-based materials.

  2. Theoretical investigation on electronic and mechanical properties of ternary actinide (U, Np, Pu) nitrides

    Science.gov (United States)

    Zhang, Yu-Juan; Zhou, Zhang-Jian; Lan, Jian-Hui; Bo, Tao; Ge, Chang-Chun; Chai, Zhi-Fang; Shi, Wei-Qun

    2017-09-01

    Actinide mononitrides as a promising advanced nuclear fuel have recently earned much attention. We herein studied the electronic and mechanical properties of the ternary actinide mixed mononitrides A0.5B0.5 N (A, B = U, Np, and Pu) using the density functional theory +U method. It is found that in the studied ternary mixed mononitrides, the 5f electronic states of all actinide atoms maintain the local electronic character and do not overlap with each other. Compared with their corresponding binary mononitrides, the U-N bond becomes more ionic, where the Np-N and Pu-N bonds become more covalent in ternary actinide mixed mononitrides. The mechanical properties (such as bulk and shear moduli, Young's modulus, and Poisson's ratio) of three ternary actinide (U-Pu) mononitrides are found to be similar to that of their corresponding binary actinide mononitrides and thus are expected not to misbehave with actinide mononitrides in respect of mechanics. In addition, all the three ternary actinide mononitrides have no imaginary frequencies in their vibration curves and correspondingly satisfy the stability criteria for elastic constants of tetragonal structures.

  3. Experimental and predicted refractive index properties in ternary mixtures of associated liquids

    Energy Technology Data Exchange (ETDEWEB)

    Sechenyh, Vitaliy V.; Legros, Jean-Claude [MRC - Microgravity Research Centre, Universite Libre de Bruxelles (ULB), CP165/62, Avenue F.D. Roosevelt 50, B-1050 Brussels (Belgium); Shevtsova, Valentina, E-mail: vshev@ulb.ac.be [MRC - Microgravity Research Centre, Universite Libre de Bruxelles (ULB), CP165/62, Avenue F.D. Roosevelt 50, B-1050 Brussels (Belgium)

    2011-11-15

    Highlights: > Measurements of refractive indices of 200 different aqueous ternary mixtures have been performed for two wave lengths. > Refractive indices of the associated ternary mixtures can be modeled with a relative error of about 0.9. > Difference between experimental and calculated derivatives of refractive index with concentration is unsatisfactory large. - Abstract: Refractive indices of ternary mixtures formed by (water + ethanol + k-ethylene glycol) (when k is mono, di or tri) and (water + t-butanol + dimethyl sulfoxide) are presented over a wide range of mixture compositions. All measurements have been conducted at 298.15 K and atmospheric pressure using two light sources: one in the visible ({lambda} = 670 nm) and the other in the infrared ({lambda} = 925 nm) spectrum. The performance of several mixing rules that are commonly used in modeling optical constants are examined. We demonstrate that the refractive indices of the associated ternary mixtures can be modeled with a relative error of about 0.9% by using the thermodynamical properties of the pure components. The concentration derivatives of the refractive index are an important parameter, as they are required for different experimental techniques. These derivatives have been determined from the experimental data on refractive indices. However, applying mixing rules for calculation of the derivatives of the refractive indices with respect to concentrations does not provide satisfactory results in the case of ternary mixtures of associated liquids.

  4. Crystallization, data collection and processing of the chymotrypsin–BTCI–trypsin ternary complex

    Energy Technology Data Exchange (ETDEWEB)

    Esteves, Gisele Ferreira; Teles, Rozeni Chagas Lima; Cavalcante, Nayara Silva; Neves, David; Ventura, Manuel Mateus [Laboratório de Biofísica, Instituto de Ciências Biológicas, Universidade de Brasília, 70910-900 Brasília-DF (Brazil); Barbosa, João Alexandre Ribeiro Gonçalves, E-mail: joao@lnls.br [Center for Structural Molecular Biology (CeBiME), Brazilian Synchrotron Light Laboratory (LNLS), CP 6192, 13083-970 Campinas-SP (Brazil); Freitas, Sonia Maria de, E-mail: joao@lnls.br [Laboratório de Biofísica, Instituto de Ciências Biológicas, Universidade de Brasília, 70910-900 Brasília-DF (Brazil)

    2007-12-01

    A ternary complex of the proteinase inhibitor (BTCI) with trypsin and chymotrypsin was crystallized and its crystal structure was solved by molecular replacement. A ternary complex of the black-eyed pea trypsin and chymotrypsin inhibitor (BTCI) with trypsin and chymotrypsin was crystallized by the sitting-drop vapour-diffusion method with 0.1 M HEPES pH 7.5, 10%(w/v) polyethylene glycol 6000 and 5%(v/v) 2-methyl-2,4-pentanediol as precipitant. BTCI is a small protein with 83 amino-acid residues isolated from Vigna unguiculata seeds and is able to inhibit trypsin and chymotrypsin simultaneously by forming a stable ternary complex. X-ray data were collected from a single crystal of the trypsin–BTCI–chymotrypsin ternary complex to 2.7 Å resolution under cryogenic conditions. The structure of the ternary complex was solved by molecular replacement using the crystal structures of the BTCI–trypsin binary complex (PDB code) and chymotrypsin (PDB code) as search models.

  5. Gene expression of ternary complexes through the compaction of nanofiber-polyplexes by mixing with lipofectamine.

    Science.gov (United States)

    Aono, Ryuta; Nomura, Kenta; Yuba, Eiji; Harada, Atsushi; Kono, Kenji

    2015-05-01

    For the development of an effective nonviral gene vector, ternary complexes were prepared through the compaction of nanofiber-polyplexes. These were formed using pDNA and a head-tail type polycation bearing a multi-arm poly(ethylene glycol) head and a poly(l-lysine) tail, and this strategy was based on the crowding effect of poly(ethylene glycol) in the polyplex. Mixing was carried out using a cationic lipid (lipofectamine), which is a commercially available transfection reagent. Through ternary complex formation, the elongated morphology of nanofiber-polyplexes was found to compact into a spherical shape with an average diameter of ca. 100 nm. Accompanying ternary complex formation, the compaction of the nanofiber-polyplexes can improve cellular uptake and helps the ternary complex to retain its smooth transcription/translation process, which is characteristic of nanofiber-polyplexes. As a result, ternary complexes prepared at an optimal mixing ratio exhibit a high transfection efficiency compared with lipofectamine lipoplexes.

  6. Electrochemical combustion of indigo at ternary oxide coated titanium anodes

    Directory of Open Access Journals (Sweden)

    María I. León

    2014-12-01

    Full Text Available The film of iridium and tin dioxides doped with antimony (IrO2-SnO2–Sb2O5 deposited on a Ti substrate (mesh obtained by Pechini method was used for the formation of ·OH radicals by water discharge. Detection of ·OH radicals was followed by the use of the N,N-dimethyl-p-nitrosoaniline (RNO as a spin trap. The electrode surface morphology and composition was characterized by SEM-EDS. The ternary oxide coating was used for the electrochemical combustion of indigo textile dye as a model organic compound in chloride medium. Bulk electrolyses were then carried out at different volumetric flow rates under galvanostatic conditions using a filter-press flow cell. The galvanostatic tests using RNO confirmed that Ti/IrO2-SnO2-Sb2O5 favor the hydroxyl radical formation at current densities between 5 and 7 mA cm-2, while at current density of 10 mA cm-2 the oxygen evolution reaction occurs. The indigo was totally decolorized and mineralized via reactive oxygen species, such as (·OH, H2O2, O3 and active chlorine formed in-situ at the Ti/IrO2-SnO2-Sb2O5 surface at volumetric flow rates between 0.1-0.4 L min-1 and at fixed current density of 7 mA cm-2. The mineralization of indigo carried out at 0.2 L min-1 achieved values of 100 %, with current efficiencies of 80 % and energy consumption of 1.78 KWh m-3.

  7. Mathematical representation of electrophoretic mobility in ternary solvent electrolyte systems

    Directory of Open Access Journals (Sweden)

    "Jouyban A

    2002-09-01

    Full Text Available Electrophoretic mobilities of salmeterol and phenylpropanolamine in capillary zone electrophoresis were determined using acetate buffer in mixed solvents containing different concentrations of water, methanol and acetonitrile. Maximum electrophoretic mobilities for salmeterol and phenylpropanolamine were observed with water-methanol-acetonitrile ratios of 5:50:45 v/v and 3:60:37 v/v, respectively, and minimum mobilities of both compounds occurred in methanol-acetonitrile ratio of 30:70 v/v. The generated experimental data have been used to evaluate a mathematical model to compute the electrophoretic mobility of the analytes in a ternary solvent electrolyte system. The proposed model is: ln μm =ƒ1 ln μ1+ƒ2 ln μ2+k ƒ3+M1ƒ1 ƒ2+M2 ƒ1ƒ3+M3 ƒ2ƒ3+M4 ƒ1ƒ²1+M5 ƒ²2ƒ3+M6ƒ²2ƒ3+M7ƒ1ƒ2ƒ3. Where μ is the electrophoretic mobility, subscripts m,1, 2 and 3 refer to mixed solvent and solvents 1-3, respectively, f is the volume fraction of the solvent in the mixed solvent system and M1-M7 and K are the model constants calculated by a least squares analysis. The generated experimental data fitted to the model and the back-calculated mobilities were employed to compute the average percentage deviation (APD as an accuracy criterion. The obtained APD for salmeterol and phenylpropanolamine are 3.10 and 2.21%, respectively and the low APD values indicate that the model is able to calculate the mobilities within an acceptable error range.

  8. Luminescent properties of ytterbium-doped ternary lanthanum chloride

    Energy Technology Data Exchange (ETDEWEB)

    Kaminska, A., E-mail: kaminska@ifpan.edu.pl [Institute of Physics, Polish Academy of Sciences, 02-668 Warsaw (Poland); Cybinska, J. [Faculty of Chemistry, University of Wroclaw, Joliot-Curie 14, 50-383 Wroclaw (Poland); Zhydachevskii, Ya. [Institute of Physics, Polish Academy of Sciences, 02-668 Warsaw (Poland); Lviv Polytechnic National University, 12 Bandera, Lviv 79646 (Ukraine); Sybilski, P. [Institute of Physics, Polish Academy of Sciences, 02-668 Warsaw (Poland); Meyer, G. [Department of Chemistry, University of Cologne, Greinstrasse 6, D-50939 Koeln (Germany); Suchocki, A. [Institute of Physics, Polish Academy of Sciences, 02-668 Warsaw (Poland); Institute of Physics, University of Bydgoszcz, Weyssenhoffa 11, 85-072, Bydgoszcz (Poland)

    2011-07-28

    Highlights: > Ytterbium-doped ternary lanthanum chloride as a promising light-emitting material. > The luminescence properties of K{sub 2}LaCl{sub 5}:Yb{sup 3+} powders with different Yb concentration. > Very good temperature stability of the powders for higher Yb concentration. - Abstract: Studies of the absorption and temperature dependence of photoluminescence spectra and luminescence decay times of the intra-shell f-f transitions ({sup 2}F{sub 5/2} {r_reversible} {sup 2}F{sub 7/2}) of Yb{sup 3+} ions in K{sub 2}LaCl{sub 5}:Yb{sup 3+} powders with 5, 10, 15 and 25% of ytterbium are presented. The spectroscopic properties of the powders with different ytterbium content are compared. Experiments were performed at the temperatures from 25 to 300 K. The strong emission around 982 nm has been observed under direct excitation of the luminescence center with 960 nm line of continuous wave Ti:sapphire laser pumped by Ar-ion laser. The temperature quenching effect of the luminescence was rather week, especially in the samples with higher concentration of ytterbium (15 and 25%). Additionally the probability of the f-f radiative transitions of the Yb{sup 3+} ions in these powders was almost temperature independent for more heavily doped samples (with 15 and 25% of Yb) and only weakly temperature dependent for less doped samples (with 5 and 10% of Yb). These results reveal high thermal stability of the optical properties of the examined powders.

  9. Ternary eutectic dendrites: Pattern formation and scaling properties

    Science.gov (United States)

    Rátkai, László; Szállás, Attila; Pusztai, Tamás; Mohri, Tetsuo; Gránásy, László

    2015-04-01

    Extending previous work [Pusztai et al., Phys. Rev. E 87, 032401 (2013)], we have studied the formation of eutectic dendrites in a model ternary system within the framework of the phase-field theory. We have mapped out the domain in which two-phase dendritic structures grow. With increasing pulling velocity, the following sequence of growth morphologies is observed: flat front lamellae → eutectic colonies → eutectic dendrites → dendrites with target pattern → partitionless dendrites → partitionless flat front. We confirm that the two-phase and one-phase dendrites have similar forms and display a similar scaling of the dendrite tip radius with the interface free energy. It is also found that the possible eutectic patterns include the target pattern, and single- and multiarm spirals, of which the thermal fluctuations choose. The most probable number of spiral arms increases with increasing tip radius and with decreasing kinetic anisotropy. Our numerical simulations confirm that in agreement with the assumptions of a recent analysis of two-phase dendrites [Akamatsu et al., Phys. Rev. Lett. 112, 105502 (2014)], the Jackson-Hunt scaling of the eutectic wavelength with pulling velocity is obeyed in the parameter domain explored, and that the natural eutectic wavelength is proportional to the tip radius of the two-phase dendrites. Finally, we find that it is very difficult/virtually impossible to form spiraling two-phase dendrites without anisotropy, an observation that seems to contradict the expectations of Akamatsu et al. Yet, it cannot be excluded that in isotropic systems, two-phase dendrites are rare events difficult to observe in simulations.

  10. Structural, electronic and optical properties of La{sub x}Sc{sub 1-x}Sb alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ghezali, M. [Department of science and technology, University of bechar, BP 417 rue de kanadissa, 08000 bechar (Algeria); Microphysics and nanophysics laboratory (LaMiN), ENP-oran, BP 1523 ElM’Naouer, oran 31000, Algeria ghezali-mohamed75@yahoo.fr (Algeria)

    2015-03-30

    We present calculations of the structural, electronic and optic properties of LaxSc1-xSb ternary alloys for 0≤x≤1, by using the first principle full potential linear muffin-tin orbital (FPLMTO) method based on the local density approximation (LDA). the lattice constant, bulk modulus, electronic band structures, density of state and optical properties such as dielectric functions, refractive index and extinction coefficient are calculated and discussed for (x=0.25, 0.5 and 0.75). Our results agree well with the available data in the literature.

  11. Microstructure and creep behavior of magnesium-aluminum alloys containing alkaline and rare earth additions

    Science.gov (United States)

    Saddock, Nicholas David

    In the past few decades governmental regulation and consumer demands have lead the automotive companies towards vehicle lightweighting. Powertrain components offer significant potential for vehicle weight reductions. Recently, magnesium alloys have shown promise for use in powertrain applications where creep has been a limiting factor. These systems are Mg-Al based, with alkaline earth or rare earth additions. The solidification, microstructure, and creep behavior of a series of Mg-4 Al- 4 X:(Ca, Ce, La, and Sr) alloys and a commercially developed AXJ530 (Mg--5 Al--3 Ca--0.15 Sr) alloy (by wt%) have been investigated. The order of decreasing freezing range of the five alloys was: AX44, AXJ530, AJ44, ALa44 and ACe44. All alloys exhibited a solid solution primary alpha-Mg phase surrounded by an interdendritic region of Mg and intermetallic(s). The primary phase was composed of grains approximately an order of magnitude larger than the cellular structure. All alloys were permanent mold cast directly to creep specimens and AXJ530 specimens were provided in die-cast form. The tensile creep behavior was investigated at 175 °C for stresses ranging from 40 to 100 MPa. The order of decreasing creep resistance was: die-cast AXJ530 and permanent mold cast AXJ530, AX44, AJ44, ALa44 and ACe44. Grain size, solute concentration, and matrix precipitates were the most significant microstructural features that influenced the creep resistance. Decreases in grain size or increases in solute concentration, both Al and the ternary addition, lowered the minimum creep rate. In the Mg-Al-Ca alloys, finely distributed Al2Ca precipitates in the matrix also improved the creep resistance by a factor of ten over the same alloy with coarse precipitates. The morphology of the eutectic region was distinct between alloys but did not contribute to difference in creep behavior. Creep strain distribution for the Mg-Al-Ca alloys developed heterogeneously on the scale of the alpha-Mg grains. As

  12. Luminophores of tunable colors from ternary Ag-In-S and quaternary Ag-In-Zn-S nanocrystals covering the visible to near-infrared spectral range.

    Science.gov (United States)

    Gabka, Grzegorz; Bujak, Piotr; Kotwica, Kamil; Ostrowski, Andrzej; Lisowski, Wojciech; Sobczak, Janusz W; Pron, Adam

    2017-01-04

    Ternary Ag-In-S or quaternary Ag-In-Zn-S nanocrystals were prepared from simple precursors (silver nitrate, indium(iii) chloride, zinc stearate in a mixture of DDT and ODE) by injecting a solution of elemental sulfur into OLA. Ternary nanocrystals were modified by depositing either a ZnS or a CdS shell, yielding type I and type II core/shell systems exhibiting photoluminescence QY in the range of 12-16%. Careful optimization of the reaction conditions allowed alloyed quaternary Ag-In-Zn-S nanocrystals exhibiting tunable photoluminescence in the spectral range of 520-720 nm with a QY of 48% and 59% for green and red radiations, respectively, to be obtained. 1H NMR analysis of the nanocrystal organic shell, after dissolution of its inorganic core, indicated that surfacial sulfur atoms were covalently bonded to aliphatic chains whereas surfacial cations were coordinated by amines and carboxylate anions. No thiol-type ligands were detected. Transfer of the prepared nanocrystals to water could be achieved in one step by exchanging the initial ligands for 11-mercaptoundecanoic ones resulting in a QY value of 31%. A new Ag-In-Zn-S nanocrystal preparation method was elaborated in which indium and zinc salts of fatty acids were used as cation precursors and DDT was replaced by thioacetamide. This original DDT-free method enabled similar tuning of the photoluminescence properties of the nanocrystals as in the previous method; however the measured photoluminescence QYs were three times lower. Hence, further optimization of the new method is required.

  13. Compositional regions of single phases at 1800 Degree-Sign C in Mo-rich Mo-Si-B ternary system

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Seong-Ho, E-mail: fy11001@mail.kankyo.tohoku.ac.jp [Graduate School of Environmental Studies, Tohoku University, Sendai, Miyagi 980-8579 (Japan); Yoshimi, Kyosuke; Maruyama, Kouichi [Graduate School of Environmental Studies, Tohoku University, Sendai, Miyagi 980-8579 (Japan); Tu, Rong; Goto, Takashi [Institute for Materials Research, Tohoku University, Sendai, Miyagi 980-8577 (Japan)

    2012-08-30

    Single-phase regions in Mo-rich Mo-Si-B alloys at 1800 Degree-Sign C were experimentally determined using a field-emission (FE) gun-type electron probe micro-analyzer (EPMA) in this study. A quantitative analysis by FE-EPMA was conducted with the calibration method we applied in our previous study to improve the accuracy in the B measurements. The compositional ranges of the determined Mo solid solution, silicide and boride phases were in good agreement with those of Mo-Si and Mo-B binary phase diagrams. On the other hand, the determined solubility of B in Mo solid solution, Mo{sub 3}Si and T{sub 1} (Mo{sub 5}Si{sub 3}) were quite different from that indicated in previously reported ternary phase diagrams. The compositional region of the T{sub 2} (Mo{sub 5}SiB{sub 2}) single-phase ranges from 9.7 to 13.3 at% for Si and from 23.5 to 26.8 at% for B. The following two points were made clear by the ternary phase diagram as determined in this study. One is that no stoichiometric T{sub 2} composition is in the T{sub 2} single-phase region, confirming no T{sub 2} single-phase material can be obtained at the stoichiometric composition at 1800 Degree-Sign C. The another is that the T{sub 2} region of this study expands to a Si-rich area from the stoichiometric composition.

  14. Effect of niobium on microstructure and mechanical properties of high carbon Fe-10.5 wt.% Al alloys

    Energy Technology Data Exchange (ETDEWEB)

    Baligidad, R.G

    2004-03-15

    The effect of niobium on the microstructure and mechanical properties of high carbon Fe-10.5 wt.% Al alloys has been investigated. The alloys were prepared by a combination of air induction melting with flux cover (AIMFC) and electroslag remelting (ESR). The ESR ingots were hot-forged and hot-rolled at 1373 K. The hot-rolled alloys were characterized. The ternary Fe-10.5 wt.% Al-(0.7 and 0.9 wt.%) C alloys exhibited two-phase microstructure of large volume fraction of Fe{sub 3}AlC{sub 0.5} precipitates in Fe-Al ({alpha}) matrix. Addition of niobium to Fe-10.5 wt.% Al-(0.7 and 0.9 wt.%) C alloys resulted in the precipitation of small volume fraction of niobium carbide precipitates in Fe-Al ({alpha}) matrix in addition to large volume fraction of Fe{sub 3}AlC{sub 0.5} precipitates. The addition of up to 2 wt.% Nb to high carbon Fe-10.5 wt.% Al alloys has no effect on the yield strength at both room temperature and 873 K as well as creep properties at 140 MPa and 873 K, but it has reduced the room temperature tensile elongation at higher (2 wt.%) concentration. In the present work, it has also been observed that alloys containing high (0.9 wt.%) carbon, exhibited higher yield strength at room temperature as compared to alloys containing low (0.7 wt.%) carbon. The increase in strength with small increase in carbon may be attributed to the significant increase in volume fraction of Fe{sub 3}AlC {sub 0.5} precipitates.

  15. Statistical thermodynamics of alloys

    CERN Document Server

    Gokcen, N A

    1986-01-01

    This book is intended for scientists, researchers, and graduate students interested in solutions in general, and solutions of metals in particular. Readers are assumed to have a good background in thermodynamics, presented in such books as those cited at the end of Chapter 1, "Thermo­ dynamic Background." The contents of the book are limited to the solutions of metals + metals, and metals + metalloids, but the results are also appli­ cable to numerous other types of solutions encountered by metallurgists, materials scientists, geologists, ceramists, and chemists. Attempts have been made to cover each topic in depth with numerical examples whenever necessary. Chapter 2 presents phase equilibria and phase diagrams as related to the thermodynamics of solutions. The emphasis is on the binary diagrams since the ternary diagrams can be understood in terms of the binary diagrams coupled with the phase rule, and the Gibbs energies of mixing. The cal­ culation of thermodynamic properties from the phase diagrams is ...

  16. The microstructure and properties of as-cast Sn-Zn-Bi solder alloys

    Directory of Open Access Journals (Sweden)

    Mladenović Srba A.

    2012-01-01

    Full Text Available Research on the lead-free solders has attracted wide attention, mostly as the result of the implementation of the Directive on the Restriction of the Use of Hazardous Substances in Electrical and Electronic Equipment. The Sn-Zn solder alloys have been considered to be one of the most attractive lead-free solders due to its ability to easily replace Sn-Pb eutectic alloy without increasing the soldering temperature. Furthermore, the mechanical properties are comparable or even superior to those of Sn-Pb solder. However, other problems still persist. The solution to overcoming these drawbacks is to add a small amount of alloying elements (Bi, Ag, Cr, Cu, and Sb to the Sn-Zn alloys. Microstructure, tensile strength, and hardness of the selected Sn-Zn-Bi ternary alloys have been investigated in this study. The SEM-EDS was used for the identification of co-existing phases in the samples. The specimens’ microstructures are composed of three phases: Sn-rich solid solution as the matrix, Bi-phase and Zn-rich phase. The Bi precipitates are formed around the Sn-dendrit grains as well as around the Zn-rich phase. The amount of Bi segregation increases with the increase of Bi content. The Sn-Zn-Bi alloys exhibit the high tensile strength and hardness, but the values of these mechanical properties decrease with the increase of Bi content, as well as the reduction of Zn content. The results presented in this paper may offer further knowledge of the effects various parameters have on the properties of lead-free Sn-Zn-Bi solders.

  17. The effect of Mn and B on the magnetic and structural properties of nanostructured Fe60Al40 alloys produced by mechanical alloying.

    Science.gov (United States)

    Rico, M M; Alcázar, G A Pérez; Zamora, L E; González, C; Greneche, J M

    2008-06-01

    The effect of Mn and B on the magnetic and structural properties of nanostructured samples of the Fe60Al40 system, prepared by mechanical alloying, was studied by 57Fe Mössbauer spectrometry, X-ray diffraction and magnetic measurements. In the case of the Fe(60-x)Mn(x)Al40 system, 24 h milling time is required to achieve the BCC ternary phase. Different magnetic structures are observed according to the temperature and the Mn content for alloys milled during 48 h: ferromagnetic, antiferromagnetic, spin-glass, reentrant spin-glass and superparamagnetic behavior. They result from the bond randomness behaviour induced by the atomic disorder introduced by the MA process and from the competitive interactions of the Fe-Fe ferromagnetic interactions and the Mn-Mn and Fe-Mn antiferromagnetic interactions and finally the presence of Al atoms acting as dilutors. When B is added in the Fe60Al40 alloy and milled for 12 and 24 hours, two crystalline phases were found: a prevailing FeAl BCC phase and a Fe2B phase type. In addition, one observes an additional contribution attributed to grain boundaries which increases when both milling time and boron composition increase. Finally Mn and B were added to samples of the Fe60Al40 system prepared by mechanical alloying during 12 and 24 hours. Mn content was fixed to 10 at.% and B content varied between 0 and 20 at.%, substituting Al. X-ray patterns show two crystalline phases, the ternary FeMnAl BCC phase, and a (Fe,Mn)2B phase type. The relative proportion of the last phase increases when the B content increases, in addition to changes of the grain size and the lattice parameter. Such behavior was observed for both milling periods. On the other hand, the magnetic hyperfine field distributions show that both phases exhibit chemical disorder, and that the contribution attributed to the grain boundaries is less important when the B content increases. Coercive field values of about 10(2) Oe slightly increase with boron content

  18. Low alloy steels that minimize the hydrogen-carbide reaction. Final technical report, October 1, 1978-September 30, 1979. Part I

    Energy Technology Data Exchange (ETDEWEB)

    Kar, R. J.; Parker, E. R.; Zackay, V. F.

    1979-01-01

    This report presents results obtained during the first year of a research program to investigate important metallurgical parameters that control the reactions of hydrogen with carbides in steels. Preliminary work included a detailed literature review of th phenomenon of decarburization and methane bubble formation in steels and a suitable experimental technique for investigating hydrogen attack in laboratory conditions was established. Detailed microstructural-mechanical property evaluations were carried out on two series of alloys; the first was based on a plain carbon steel to which binary and ternary alloy additions were made to vary the carbide structure and morphology and assess these effects on the observed hydrogen attack resistance. The second group of steels consisted of commercial Mn-Mo-Ni (A 533 B) and Cr-Mo (A 542 type) steels and their alloy modifications, with a view towards developing steels with improved hydrogen attack resistance.

  19. Ternary ceramic thermal spraying powder and method of manufacturing thermal sprayed coating using said powder

    Energy Technology Data Exchange (ETDEWEB)

    Vogli, Evelina; Sherman, Andrew J.; Glasgow, Curtis P.

    2018-02-06

    The invention describes a method for producing ternary and binary ceramic powders and their thermal spraying capable of manufacturing thermal sprayed coatings with superior properties. Powder contain at least 30% by weight ternary ceramic, at least 20% by weight binary molybdenum borides, at least one of the binary borides of Cr, Fe, Ni, W and Co and a maximum of 10% by weight of nano and submicro-sized boron nitride. The primary crystal phase of the manufactured thermal sprayed coatings from these powders is a ternary ceramic, while the secondary phases are binary ceramics. The coatings have extremely high resistance against corrosion of molten metal, extremely thermal shock resistance and superior tribological properties at low and at high temperatures.

  20. Efficient Implementation of Ternary SDM Filters using State-of-the-Art FPGA

    Directory of Open Access Journals (Sweden)

    Tayabuddin Memon

    2011-04-01

    Full Text Available We present the analysis of a ternary FIR filter at varying OSR (Over Sampling Ratios. The sigma delta modulated ternary filter impulse responses obtained using Matlab at varying OSRs show that each doubling of OSR results in an increase of 10dB in the stopband attenuation. BT-FIR (Balanced Ternary FIR Filters at varying OSRs have been implemented in VHDL using an efficient adder tree organization to gather the partial products. Filters in both pipelined and non-pipelined modes were synthesized on a small number of representative commercial FPGA (Field Programmable Gate Arrays devices. Both the filter taps and binary inputs use 2\\'s complement format. The synthesis results show the tradeoffs between hardware area and performance at varying OSRs. In pipelined mode, a 6MHz video stream can easily be handled at an OSR of 64, while occupying less than 8% of a Stratix-III device.

  1. H2SO4-HNO3-H2O ternary system in the stratosphere

    Science.gov (United States)

    Kiang, C. S.; Hamill, P.

    1974-01-01

    Estimation of the equilibrium vapor pressure over the ternary system H2SO4-HNO3-H2O to study the possibility of stratospheric aerosol formation involving HNO3. It is shown that the vapor pressures for the ternary system H2SO4-HNO3-H2O with weight composition around 70-80% H2SO4, 10-20% HNO3, 10-20% H2O at -50 C are below the order of 10 to the minus 8th mm Hg. It is concluded that there exists more than sufficient nitric acid and water vapor in the stratosphere to participate in ternary system aerosol formation at -50 C. Therefore, HNO3 should be present in stratospheric aerosols, provided that H2SO4 is also present.

  2. Thermodynamic description of the Al-Cu-Yb ternary system supported by first-principles calculations

    Directory of Open Access Journals (Sweden)

    Huang G.

    2016-01-01

    Full Text Available Phase relationships of the ternary Al-Cu-Yb system have been assessed using a combination of CALPHAD method and first principles calculations. A self-consistent thermodynamic parameter was established based on the experimental and theoretical information. Most of the binary intermetallic phases, except Al3Yb, Al2Yb, Cu2Yb and Cu5Yb, were assumed to be zero solubility in the ternary system. Based on the experimental data, eight ternary intermetallic compounds were taken into consideration in this system. Among them, three were treated as line compounds with large homogeneity ranges for Al and Cu. The others were treated as stoichiometric compounds. The calculated phase diagrams were in agreement with available experimental and theoretical data.

  3. A Novel Method for Detecting and Computing Univolatility Curves in Ternary Mixtures

    DEFF Research Database (Denmark)

    Shcherbakov, Nataliya; Rodriguez-Donis, Ivonne; Abildskov, Jens

    2017-01-01

    of the generalized univolatility and unidistribution curves in the three dimensional composition – temperature state space lead to a simple and efficient algorithm of computation of the univolatility curves. Two peculiar ternary systems, namely diethylamine – chloroform – methanol and hexane – benzene......Residue curve maps (RCMs) and univolatility curves are crucial tools for analysis and design of distillation processes. Even in the case of ternary mixtures, the topology of these maps is highly non-trivial. We propose a novel method allowing detection and computation of univolatility curves...... in homogeneous ternary mixtures independently of the presence of azeotropes, which is particularly important in the case of zeotropic mixtures. The method is based on the analysis of the geometry of the boiling temperature surface constrained by the univolatility condition. The introduced concepts...

  4. Experimental investigation of phase equilibria in the Ni-Nb-V ternary system

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xingjun; Yang, Shuiyuan; Wang, Cuiping [Xiamen Univ. (China). Dept. of Materials Science and Engineering; Xiamen Univ. (China). Fujian Provincial Key Lab. of Materials Genome; Zhang, Xianjie; Jiang, Hengxing; Shi, Zhan [Xiamen Univ. (China). Dept. of Materials Science and Engineering

    2017-09-15

    The phase equilibria of the Ni-Nb-V ternary system at 1000 C and 1200 C were established using electron probe microanalysis, X-ray diffraction and differential scanning calorimetry. The results of the investigation revealed that: (1) The Nb solubility in (Ni) and σ{sup '} phases was less than 10 at.%; (2) A ternary compound τ (NiNbV) was confirmed, in which V had a large solubility; (3) A new liquid region was evident at 1200 C, but was absent at 1000 C; (4) The lattice constants of Ni{sub 3}Nb and Ni{sub 6}Nb{sub 7} phase decreased with increase in V content in the Ni{sub 3}Nb and Ni{sub 6}Nb{sub 7}. The phase equilibria of the Ni-Nb-V ternary system will contribute to its thermodynamic assessment.

  5. Binary and ternary cocrystals of sulfa drug acetazolamide with pyridine carboxamides and cyclic amides

    Directory of Open Access Journals (Sweden)

    Geetha Bolla

    2016-03-01

    Full Text Available A novel design strategy for cocrystals of a sulfonamide drug with pyridine carboxamides and cyclic amides is developed based on synthon identification as well as size and shape match of coformers. Binary adducts of acetazolamide (ACZ with lactams (valerolactam and caprolactam, VLM, CPR, cyclic amides (2-pyridone, labeled as 2HP and its derivatives MeHP, OMeHP and pyridine amides (nicotinamide and picolinamide, NAM, PAM were obtained by manual grinding, and their single crystals by solution crystallization. The heterosynthons in the binary cocrystals of ACZ with these coformers suggested a ternary combination for ACZ with pyridone and nicotinamide. Novel supramolecular synthons of ACZ with lactams and pyridine carboxamides are reported together with binary and ternary cocrystals for a sulfonamide drug. This crystal engineering study resulted in the first ternary cocrystal of acetazolamide with amide coformers, ACZ–NAM–2HP (1:1:1.

  6. Ternary mixture of fatty acids as phase change materials for thermal energy storage applications

    Directory of Open Access Journals (Sweden)

    Karunesh Kant

    2016-11-01

    Full Text Available The present study deals with the development of ternary mixtures of fatty acids for low temperature thermal energy storage applications. The commercial grade fatty acids such as Capric Acid (CA, Lauric Acid (LA, Palmitic Acid (PA and Stearic Acid (SA, have been used to prepare stable, solid–liquid phase change material (PCM for the same. In this regard, a series of ternary mixture i.e. CA–LA–SA (CLS and CA–PA–SA (CPS have been developed with different weight percentages. Thermal characteristics of these developed ternary mixture i.e. melting temperature and latent heat of fusion have been measured by using Differential Scanning Calorimeter (DSC technique. The synthesized materials are found to have melting temperature in the range of 14–21 °C (along with adequate amount of latent heat of fusion, which may be quite useful for several low temperature thermal energy storage applications.

  7. Ternary critical point determination of experimental demixion curve: calculation method, relevance and limits

    Directory of Open Access Journals (Sweden)

    Goutaudier C.

    2013-07-01

    Full Text Available In many cases of miscibility gap in ternary systems, one critical point at least, stable or metastable, can be observed under isobaric and isothermal conditions. The experimental determination of this invariant point is difficult but its knowledge is essential. The authors propose a method for calculating the composition of the invariant solution starting from the composition of the liquid phases in equilibrium. The computing method is based on the barycentric properties of the conjugate solutions (binodal points and an extension of the straight diameter method. A systematic study was carried out on a large number of ternary systems involving diverse constituents (230 sets ternary systems at various temperatures. Thus the results are presented and analyzed by means of consistency tests.

  8. [Synthesis and luminescence properties of ternary complexes of europium with aromatic carboxylic acid and acrylonitrile].

    Science.gov (United States)

    Guo, Dong-cai; Yi, Li-ming; Shu, Wan-gen; Zhang, Zhen-zhen; Zeng, Zhao-rong; Zhang, Xi-qian

    2006-11-01

    Five ternary complexes were synthesized from europium with aromatic carboxylic acid (p-methylbenzoic acid, methoxybenzoic acid, m-chlorobenzoic acid and benzoic acid, p-hydroxylbenzoic acid) and acrylonitrile, and characterized by means of elemental analysis, thermal analysis, FTIR spectra and UV spectra. The fluorescence spectra show that five ternary complexes have good luminescence properties, and the sequence of the ability of the aromatic carboxylic acids to transfer light energy to europium ion is as follows: p-methylbenzoic acid>benzoic acid>m-chlorobenzoic acid>p-hydroxylbenzoic acid>methoxybenzoic acid. Meanwhile, the ternary europium complexes containing a reactive ligand acrylonitrile will possibly have a potential application to the fabrication of bonding-type europium polymer luminescent materials.

  9. Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

    Science.gov (United States)

    Kim, J. T.; Hong, S. H.; Park, H. J.; Kim, Y. S.; Suh, J. Y.; Lee, J. K.; Park, J. M.; Maity, T.; Eckert, J.; Kim, K. B.

    2017-01-01

    In the present study, the microstructural evolution and the modulation of the mechanical properties have been investigated for a Co-Cr-Mo (CCM) ternary eutectic alloy by addition of a small amount of copper (0.5 and 1 at.%). The microstructural observations reveal a distinct dissimilarity in the eutectic structure such as a broken lamellar structure and a well-aligned lamellar structure and an increasing volume fraction of Co lamellae as increasing amount of copper addition. This microstructural evolution leads to improved plasticity from 1% to 10% without the typical tradeoff between the overall strength and compressive plasticity. Moreover, investigation of the fractured samples indicates that the CCMCu alloy exhibits higher plastic deformability and combinatorial mechanisms for improved plastic behavior. The improved plasticity of CCMCu alloys originates from several deformation mechanisms; i) slip, ii) deformation twinning, iii) strain-induced transformation and iv) shear banding. These results reveal that the mechanical properties of eutectic alloys in the Co-Cr-Mo system can be ameliorated by micro-alloying such as Cu addition. PMID:28067248

  10. A model for oxidation-driven surface segregation and transport on Pt-alloys studied by atom probe tomography

    Science.gov (United States)

    Bagot, P. A. J.; Kreuzer, H. J.; Cerezo, A.; Smith, G. D. W.

    2011-08-01

    Using a purpose-built 3D atom probe, we have previously shown that exposure to oxidising gases (NO, N2O, O2) induces Rh surface segregation in Pt-Rh alloys, the extent of which is strongly dependent on treatment temperature, crystallographic plane and the presence of ternary alloy additions. In this paper, the segregation trends identified on three different crystallographic surfaces of Pt-Rh are analysed using thermodynamic and kinetic arguments. The segregation model we present is generic for diffusion on alloy surfaces in the presence of active gases. From it we obtain activation energies and diffusion coefficients for the processes of metal-oxide species diffusion both perpendicular to and laterally across the surface. Using these we propose a simple model for the interaction of chemically active gases with the surfaces of such alloys. Applying this understanding to sequential oxidation/reduction treatments would in principle allow improved control of the surface composition of alloy catalysts. Related applications of this model include optimisation of core-shell catalyst nanoparticles.

  11. Electrochemical Properties of Ni 47 Ti 49 Co 4 Shape Memory Alloy in Artificial Urine for Urological Implant

    KAUST Repository

    Ahmed, Rasha A.

    2015-09-02

    © 2015 American Chemical Society. The corrosion performance of Ni47Ti49Co4 shape memory alloys (SMA) in artificial urine solution was evaluated in comparison with Ni51Ti49 alloy as reference, at 37°C and pH 5.6-6.4. SEM results revealed less pitting attack for Ni47Ti49Co4 SMA surface after immersion in artificial urine solution. The XRD analysis demonstrated the formation of passive film on Ni47Ti49Co4 SMA. The XPS analysis indicated that the film mainly consisted of O, Ti, Co, P, and a small amount of Ni, and the concentration of Ni ions release was greatly reduced compared to that of the Ni51Ti49 SMA. Linear polarization results illustrated that corrosion potential (Ecorr), corrosion current density (icorr), and ac polarization resistance (Rp) were affected greatly by alloying Co to Nitinol alloy. Our observations indicated that the corrosion resistance of the ternary alloy, Ni47Ti49Co4 SMA, offers superior corrosion resistance in artificial urine when compared to Ni51Ti49 SMA, which was suitable for medical applications.

  12. Evaluation of precipitates used in strainer head loss testing: Part II. Precipitates by in situ aluminum alloy corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Bahn, Chi Bum, E-mail: bahn@anl.go [Argonne National Laboratory, Lemont, IL 60439 (United States); Kasza, Ken E.; Shack, William J.; Natesan, Ken [Argonne National Laboratory, Lemont, IL 60439 (United States); Klein, Paul [The United States Nuclear Regulatory Commission, Rockville, MD 20852 (United States)

    2011-05-15

    Graphical abstract: Display Omitted Research highlights: Sump strainer head loss testing to evaluate chemical effects. Aluminum hydroxide precipitates by in situ Al alloy corrosion caused head loss. Intermetallic particles released from Al alloy can also cause significant head loss. When evaluating Al effect on head loss, intermetallics should be considered. - Abstract: Vertical loop head loss tests were performed with 6061 and 1100 aluminum (Al) alloy plates immersed in borated solution at pH = 9.3 at room temperature and 60 {sup o}C. The results suggest that the potential for corrosion of an Al alloy to result in increased head loss across a glass fiber bed may depend on its microstructure, i.e., the size distribution and number density of intermetallic particles that are present in Al matrix and FeSiAl ternary compounds, as well as its Al release rate. Per unit mass of Al removed from solution, the WCAP-16530 aluminum hydroxide (Al(OH){sub 3}) surrogate was more effective in increasing head loss than the Al(OH){sub 3} precipitates formed in situ by corrosion of Al alloy. However, in choosing a representative amount of surrogate for plant specific testing, consideration should be given to the potential for additional head losses due to intermetallic particles and the apparent reduction in the effective solubility of Al(OH){sub 3} when intermetallic particles are present.

  13. Deformation mechanisms to ameliorate the mechanical properties of novel TRIP/TWIP Co-Cr-Mo-(Cu) ultrafine eutectic alloys

    Science.gov (United States)

    Kim, J. T.; Hong, S. H.; Park, H. J.; Kim, Y. S.; Suh, J. Y.; Lee, J. K.; Park, J. M.; Maity, T.; Eckert, J.; Kim, K. B.

    2017-01-01

    In the present study, the microstructural evolution and the modulation of the mechanical properties have been investigated for a Co-Cr-Mo (CCM) ternary eutectic alloy by addition of a small amount of copper (0.5 and 1 at.%). The microstructural observations reveal a distinct dissimilarity in the eutectic structure such as a broken lamellar structure and a well-aligned lamellar structure and an increasing volume fraction of Co lamellae as increasing amount of copper addition. This microstructural evolution leads to improved plasticity from 1% to 10% without the typical tradeoff between the overall strength and compressive plasticity. Moreover, investigation of the fractured samples indicates that the CCMCu alloy exhibits higher plastic deformability and combinatorial mechanisms for improved plastic behavior. The improved plasticity of CCMCu alloys originates from several deformation mechanisms; i) slip, ii) deformation twinning, iii) strain-induced transformation and iv) shear banding. These results reveal that the mechanical properties of eutectic alloys in the Co-Cr-Mo system can be ameliorated by micro-alloying such as Cu addition.

  14. Synthesis and properties of bulk metallic glasses in Pd-Ni-P and Pd-Cu-P alloys

    Energy Technology Data Exchange (ETDEWEB)

    He, Y.; Schwarz, R.B.

    1996-11-01

    Bulk amorphous Pd-Ni-P and Pd-Cu-P alloy rods with diameters 7-25 mm were synthesized over a wide composition range using a fluxing technique. For most bulk amorphous Pd-Ni-P alloys, the difference {Delta}T=T{sub x}-T{sub g} between the crystallization temperature T{sub x} and the glass transition temperature T{sub g} is larger than 90 K, while for bulk amorphous Pd-Cu-P alloys, {Delta}T varies from 27 to 73 K. Pd{sub 40}Ni{sub 40}P{sub 20} has the highest glass formability, and 300-g bulk amorphous cylinders, 25mm dia and 50mm long, can be easily produced. This size is not an upper limit. The paper presents the glass formation ranges for both ternary alloy systems and data on the thermal stability of the amorphous alloys, as well as their specific heat, density, and elastic properties.

  15. Phase Relations in Ternary Systems in the Subsolidus Region: Methods to Formulate Solid Solution Equations and to Find Particular Compositions

    Science.gov (United States)

    Alvarez-Montan~o, Victor E.; Farías, Mario H.; Brown, Francisco; Mun~oz-Palma, Iliana C.; Cubillas, Fernando; Castillon-Barraza, Felipe F.

    2017-01-01

    A good understanding of ternary phase diagrams is required to advance and/or to reproduce experimental research in solid-state and materials chemistry. The aim of this paper is to describe the solutions to problems that appear when studying or determining ternary phase diagrams. A brief description of the principal features shown in phase diagrams…

  16. A ternary memory module using low-voltage control over optical properties of metal-polypyridyl monolayers.

    Science.gov (United States)

    Kumar, Anup; Chhatwal, Megha; Mondal, Prakash Chandra; Singh, Vikram; Singh, Alok Kumar; Cristaldi, Domenico A; Gupta, Rinkoo D; Gulino, Antonino

    2014-04-14

    A ternary memory module has been designed as a function of precise voltage command. The monolayer based module displays perpetual stability and non-hysteretic reversibility for multiple scans (10(2)). Ternary-state readout provides a vision to integrate the next generation of "smart electro-optical devices" viable for multi-state memory.

  17. Bulk metallic glass formation in the Pd-Ni-P and Pd-Cu-P alloy systems

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, R.B.; He, Y. [Los Alamos National Lab., NM (United States). Center for Materials Science

    1996-12-11

    Bulk metallic glasses were prepared in the Pd-Ni-P and Pd-Cu-P systems using a fluxing technique. The formation of bulk amorphous Pd-Cu-P alloys was reported here for the first time. For both alloy systems, bulk glass formation requires maintaining the phosphorus content near 20 at.%. In the Pd-Ni-P system, 10-mm diameter amorphous Pd{sub x}Ni{sub 80{minus}x}P{sub 20} rods can be formed for 25 {le} x {le} 60. In the Pd-Cu-P system, 7-mm diameter amorphous Pd{sub x}Cu{sub 80{minus}x}P{sub 20} rods can be produced for 40 {le} x {le} 60. From all the ternary alloys studied, Pd{sub 40}Ni{sub 40}P{sub 20} has the highest glass formability, and 25-mm diameter amorphous cylinders, 50 mm in length, can be easily fabricated. The glass stability of the Pd-Ni-P system is wider than that of the Pd-Cu-P system. For most bulk Pd-Ni-P glasses, {Delta}T > 90 K. The {Delta}T values of bulk amorphous Pd-Cu-P alloys are considerably smaller, ranging from 27 to 73 K. The elastic constants of bulk amorphous Pd-Ni-P and Pd-Cu-P alloys were determined using a resonant ultrasound spectroscopy technique. The Pd-Ni-P glasses are slightly stiffer than the Pd-Cu-P glasses. Within each alloy system, the Young`s modulus and the bulk modulus show little change with alloy composition. Of all the bulk glass forming systems so far investigated, the ternary Pd-Ni-P system has the best glass formability. This alloy was one of the first bulk glasses discovered, yet it still remains the best in terms of glass formability. Upon replacing part of Ni by Cu, the critical cooling rates are expected to be further reduced.

  18. Advanced ordered intermetallic alloy deployment

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.T.; Maziasz, P.J.; Easton, D.S. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    The need for high-strength, high-temperature, and light-weight materials for structural applications has generated a great deal of interest in ordered intermetallic alloys, particularly in {gamma}-based titanium aluminides {gamma}-based TiAl alloys offer an attractive mix of low density ({approximately}4g/cm{sup 3}), good creep resistance, and high-temperature strength and oxidation resistance. For rotating or high-speed components. TiAl also has a high damping coefficient which minimizes vibrations and noise. These alloys generally contain two phases. {alpha}{sub 2} (DO{sub 19} structure) and {gamma} (L 1{sub 0}), at temperatures below 1120{degrees}C, the euticoid temperature. The mechanical properties of TiAl-based alloys are sensitive to both alloy compositions and microstructure. Depending on heat-treatment and thermomechanical processing, microstructures with near equiaxed {gamma}, a duplex structure (a mix of the {gamma} and {alpha}{sub 2} phases) can be developed in TiAl alloys containing 45 to 50 at. % Al. The major concern for structural use of TiAl alloys is their low ductility and poor fracture resistance at ambient temperatures. The purpose of this project is to improve the fracture toughness of TiAl-based alloys by controlling alloy composition, microstructure and thermomechanical treatment. This work is expected to lead to the development of TiAl alloys with significantly improved fracture toughness and tensile ductility for structural use.

  19. All ternary permutation constraint satisfaction problems parameterized above average have kernels with quadratic numbers of variables

    DEFF Research Database (Denmark)

    Gutin, Gregory; Van Iersel, Leo; Mnich, Matthias

    2010-01-01

    A ternary Permutation-CSP is specified by a subset Π of the symmetric group S3. An instance of such a problem consists of a set of variables V and a multiset of constraints, which are ordered triples of distinct variables of V. The objective is to find a linear ordering α of V that maximizes...... the number of triples whose rearrangement (under α) follows a permutation in Π. We prove that all ternary Permutation-CSPs parameterized above average have kernels with quadratic numbers of variables....

  20. OBJECT TRACKING WITH ROTATION-INVARIANT LARGEST DIFFERENCE INDEXED LOCAL TERNARY PATTERN

    Directory of Open Access Journals (Sweden)

    J Shajeena

    2017-02-01

    Full Text Available This paper presents an ideal method for object tracking directly in the compressed domain in video sequences. An enhanced rotation-invariant image operator called Largest Difference Indexed Local Ternary Pattern (LDILTP has been proposed. The Local Ternary Pattern which worked very well in texture classification and face recognition is now extended for rotation invariant object tracking. Histogramming the LTP code makes the descriptor resistant to translation. The histogram intersection is used to find the similarity measure. This method is robust to noise and retain contrast details. The proposed scheme has been verified on various datasets and shows a commendable performance.