WorldWideScience

Sample records for terbium

  1. Elastic properties of terbium

    DEFF Research Database (Denmark)

    Spichkin, Y.I.; Bohr, Jakob; Tishin, A.M.

    1996-01-01

    The temperature dependence of the Young modulus along the crystallographic axes b and c (E(b) and E(c)), and the internal friction of a terbium single crystal have been measured. At 4.2 K, E(b) and E(c) are equal to 38 and 84.5 GPa, respectively. The lattice part of the Young modulus and the Debye...... temperature has been calculated. The origin of the Young modulus anomalies arising at the transition to the magnetically ordered state is discussed....

  2. Critical scattering of neutrons from terbium

    DEFF Research Database (Denmark)

    Als-Nielsen, Jens Aage; Dietrich, O.W.; Marshall, W.

    1968-01-01

    The inelasticity of the critical scattering of neutrons in terbium has been measured above the Neél temperature at the (0, 0, 2−Q) satellite position. The results show that dynamic slowing down of the fluctuations does occur in a second‐order phase transition in agreement with the general theory...

  3. Semiconductor composition containing iron, dysprosium, and terbium

    Energy Technology Data Exchange (ETDEWEB)

    Pooser, Raphael C.; Lawrie, Benjamin J.; Baddorf, Arthur P.; Malasi, Abhinav; Taz, Humaira; Farah, Annettee E.; Kalyanaraman, Ramakrishnan; Duscher, Gerd Josef Mansfred; Patel, Maulik K.

    2017-09-26

    An amorphous semiconductor composition includes 1 to 70 atomic percent iron, 15 to 65 atomic percent dysprosium, 15 to 35 atomic percent terbium, balance X, wherein X is at least one of an oxidizing element and a reducing element. The composition has an essentially amorphous microstructure, an optical transmittance of at least 50% in at least the visible spectrum and semiconductor electrical properties.

  4. Raman spectroscopy study of the doping effect of the encapsulated terbium halogenides on single-walled carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Kharlamova, M.V.; Kramberger, C.; Mittelberger, A. [University of Vienna, Faculty of Physics, Vienna (Austria)

    2017-04-15

    In the present work, the doping effect of terbium chloride, terbium bromide, and terbium iodide on single-walled carbon nanotubes (SWCNTs) was compared by Raman spectroscopy. A precise investigation of the doping-induced alterations of the Raman modes of the filled SWCNTs was conducted. The shifts of the components of the Raman modes and modification of their profiles allowed concluding that the inserted terbium halogenides have acceptor doping effect on the SWCNTs, and the doping efficiency increases in the line with terbium iodide, terbium bromide, and terbium chloride. (orig.)

  5. Magnetocaloric effect of thin Terbium films

    Science.gov (United States)

    Mello, V. D.; Anselmo, D. H. A. L.; Vasconcelos, M. S.; Almeida, N. S.

    2017-12-01

    We report a theoretical study of the magnetocaloric effect of Terbium (Tb) thin films due to finite size and surface effects in the helimagnetic phase, corresponding to a temperature range from TC=219 K to TN=231 K, for external fields of the order of kOe. For a Tb thin film of 6 monolayers submitted to an applied field (ΔH =30 kOe, ΔH =50 kOe and ΔH = 70 kOe) we report a significative change in adiabatic temperature, ΔT / ΔH , near the Néel temperature, of the order ten times higher than that observed for Tb bulk. On the other hand, for small values of the magnetic field, large thickness effects are found. For external field strength around few kOe, we have found that the thermal caloric efficiency increases remarkably for ultrathin films. For an ultrathin film with 6 monolayers, we have found ΔT / ΔH = 43 K/T while for thicker films, with 20 monolayers, ΔT / ΔH = 22 K/T. Our results suggest that thin films of Tb are a promising material for magnetocaloric effect devices for applications at intermediate temperatures.

  6. Femtosecond XUV spectroscopy of gadolinium and terbium

    Energy Technology Data Exchange (ETDEWEB)

    Carley, Robert; Frietsch, Bjoern; Doebrich, Kristian; Teichmann, Martin; Gahl, Cornelius; Noack, Frank [Max-Born-Institute, Berlin (Germany); Schwarzkopf, Olaf; Wernet, Philippe [Helmholtz-Zentrum fuer Materialien und Energie (BESSY II), Berlin (Germany); Weinelt, Martin [Max-Born-Institute, Berlin (Germany); Fachbereich Physik, Freie Universitaet, Berlin (Germany)

    2011-07-01

    We present recent results of time-resolved IR-pump-XUV-probe experiments on the ultrafast demagnetization of thin films of Gadolinium(0001) and Terbium(0001) on Tungsten(110). The experiments are the first to be done using a newly developed high-order harmonics (HHG) XUV beamline at the MBI. The beamline delivers monochromated XUV pulses of approximately 150 fs duration with a photon energy resolution of up to 150 meV. Following excitation by intense femtosecond infrared (IR) pulses, photoemission with 35 eV photons allows us to directly probe the 4f electrons and their interaction with the valence band, both in the bulk and at the surface, to follow the ultrafast magnetization dynamics in the Lanthanide metals. As signatures of ultrafast demagnetization of the metal by the IR pulse, we see for the first time, rapid strong reduction of the exchange splitting in the valence band. This is followed by a slower demagnetization due to the spin-lattice interaction.

  7. Green fluorescence of terbium ions in lithium fluoroborate glasses ...

    Indian Academy of Sciences (India)

    Glasses; terbium ion; oscillator strengths; fluorescence; lifetimes; fibre lasers. 1. Introduction. Today glasses are most favourable engineering materials for abundant applications due to the wide ability of property altering by compositional modifications. The considerable examination of glass science to achieve required ...

  8. Green fluorescence of terbium ions in lithium fluoroborate glasses ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 3. Green fluorescence of terbium ions in lithium fluoroborate glasses for fibre lasers and display devices. G R DILLIP C MADHUKAR REDDY M RAJESH SHIVANAND CHAURASIA B DEVA PRASAD RAJU S W JOO. Volume 39 Issue 3 June 2016 pp 711-717 ...

  9. Terahertz Cherenkov radiation from ultrafast magnetization in terbium gallium garnet

    Science.gov (United States)

    Gorelov, S. D.; Mashkovich, E. A.; Tsarev, M. V.; Bakunov, M. I.

    2013-12-01

    We report an experimental observation of terahertz Cherenkov radiation from a moving magnetic moment produced in terbium gallium garnet by a circularly polarized femtosecond laser pulse via the inverse Faraday effect. Contrary to some existing theoretical predictions, the polarity of the observed radiation unambiguously demonstrates the paramagnetic, rather than diamagnetic, nature of the ultrafast inverse Faraday effect. From measurements of the radiation field, the Verdet constant in the subpicosecond regime is ˜3-10 times smaller than its table quasistatic value.

  10. Terbium luminescence in alumina xerogel fabricated in porous anodic alumina matrix under various excitation conditions

    Energy Technology Data Exchange (ETDEWEB)

    Gaponenko, N. V., E-mail: nik@nano.bsuir.edu.by [Belarusian State University of Informatics and Radioelectronics (Belarus); Kortov, V. S. [Yeltsin Ural Federal University (Russian Federation); Orekhovskaya, T. I.; Nikolaenko, I. A. [Belarusian State University of Informatics and Radioelectronics (Belarus); Pustovarov, V. A.; Zvonarev, S. V.; Slesarev, A. I. [Yeltsin Ural Federal University (Russian Federation); Prislopski, S. Ya. [National Academy of Sciences of Belarus, Stepanov Institute of Physics (Belarus)

    2011-07-15

    Terbium-doped alumina xerogel layers are synthesized by the sol-gel method in pores of a porous anodic alumina film 1 {mu}m thick with a pore diameter of 150-180 nm; the film is grown on a silicon substrate. The fabricated structures exhibit terbium photoluminescence with bands typical of trivalent terbium terms. Terbium X-ray luminescence with the most intense band at 542 nm is observed for the first time for such a structure. Morphological analysis of the structure by scanning electron microscopy shows the presence of xerogel clusters in pore channels, while the main pore volume remains unfilled and pore mouths remain open. The data obtained confirm the promising applications of fabricated structures for developing matrix converters of X-rays and other ionizing radiations into visible light. The possibilities of increasing luminescence intensity in the matrix converter are discussed.

  11. Optical Properties of Lithium Terbium Fluoride and Implications for Performance in High Power Lasers (Postprint)

    Science.gov (United States)

    2016-02-01

    AFRL-RX-WP-JA-2016-0323 OPTICAL PROPERTIES OF LITHIUM TERBIUM FLUORIDE AND IMPLICATIONS FOR PERFORMANCE IN HIGH POWER LASERS... AMERICA (STINFO COPY) AIR FORCE RESEARCH LABORATORY MATERIALS AND MANUFACTURING DIRECTORATE WRIGHT-PATTERSON AIR FORCE BASE, OH 45433-7750 AIR...OPTICAL PROPERTIES OF LITHIUM TERBIUM FLUORIDE AND IMPLICATIONS FOR PERFORMANCE IN HIGH POWER LASERS (POSTPRINT) 5a. CONTRACT NUMBER IN-HOUSE 5b

  12. Detection of biothiols in cells by a terbium chelate-Hg (II) system

    Science.gov (United States)

    Tan, Hongliang; Chen, Yang

    2012-01-01

    Great efforts have been devoted to the development of sensitive and specific analysis methods for biothiols because of their important roles in biological systems. We present a new detection system for biothiols that is based on the reversible quenching and restoration of fluorescence of terbium chelate caused by Hg2+ and thiol species. In the presence of biothiols, a restoration of fluorescence of terbium chelate after quenching by Hg2+ was observed due to the interaction of Hg2+ with thiol groups, and the restored fluorescence increased with the concentration of biothiols. This method was sensitive and selective for biothiols. The detection limit was 80 nM for glutathione, 100 nM for Hcy, and 400 nM for Cysteine, respectively. The terbium chelate-Hg (II) system was successfully applied to determine the levels of biothiols in cancer cells and urine samples. Further, it was also shown to be comparable to Ellman's assay. Compared to other fluorescence methods, the terbium chelate probe is advantageous because interference from short-lived nonspecific fluorescence can be efficiently eliminated due to the long fluorescence lifetime of terbium chelate, which allows for detection by time-resolved fluorescence. The terbium chelate probe can serve as a diagnostic tool for the detection of abnormal levels of biothiols in disease.

  13. Cryogenic temperature characteristics of Verdet constant of terbium sesquioxide ceramics

    Science.gov (United States)

    Snetkov, I. L.; Palashov, O. V.

    2016-12-01

    The dependence of the Verdet constant on temperature in the (80-300 K) range for a promising magneto-active material terbium sesquioxide Tb2O3 at the wavelengths of 405-1064 nm is considered. For each of the studied wavelengths, the Verdet constant of the material cooled down to the liquid nitrogen temperature increased by more than a factor of 3.2 as compared to the room temperature value. Similarly to the other paramagnetics, the increase follows the law ∼1/T. Approximations for the temperature dependence of the Verdet constant have been obtained and the value of 1/V·(dV/dT) has been estimated. This information is needed to determine the angle of rotation as well as the variation of the extinction ratio of a Faraday isolator with temperature and extremely important at creation a cryogenic Faraday devices.

  14. Biogenic terbium oxide nanoparticles as the vanguard against osteosarcoma

    Science.gov (United States)

    Iram, Sana; Khan, Salman; Ansary, Abu Ayoobul; Arshad, Mohd; Siddiqui, Sahabjada; Ahmad, Ejaz; Khan, Rizwan H.; Khan, Mohd Sajid

    2016-11-01

    The synthesis of inner transition metal nanoparticles via an ecofriendly route is quite difficult. This study, for the first time, reports synthesis of terbium oxide nanoparticles using fungus, Fusarium oxysporum. The biocompatible terbium oxide nanoparticles (Tb2O3 NPs) were synthesized by incubating Tb4O7 with the biomass of fungus F. oxysporum. Multiple physical characterization techniques, such as UV-visible and photoluminescence spectroscopy, TEM, SAED, and zeta-potential were used to confirm the synthesis, purity, optical and surface characteristics, crystallinity, size, shape, distribution, and stability of the nanoemulsion of Tb2O3 NPs. The Tb2O3 NPs were found to inhibit the propagation of MG-63 and Saos-2 cell-lines (IC50 value of 0.102 μg/mL) and remained non-toxic up to a concentration of 0.373 μg/mL toward primary osteoblasts. Cell viability decreased in a concentration-dependent manner upon exposure to 10 nm Tb2O3 NPs in the concentration range 0.023-0.373 μg/mL. Cell toxicity was evaluated by observing changes in cell morphology, cell viability, oxidative stress parameters, and FACS analysis. Morphological examinations of cells revealed cell shrinkage, nuclear condensation, and formation of apoptotic bodies. The level of ROS within the cells-an indicator of oxidative stress was significantly increased. The induction of apoptosis at concentrations ≤ IC50 was corroborated by 4‧,6-diamidino-2-phenylindole dihydrochloride (DAPI) staining (DNA damage and nuclear fragmentation). Flow-cytometric studies indicated that the response was dose dependent with a threshold effect.

  15. Autofluorescence-free Live-cell Imaging Using Terbium Nanoparticles.

    Science.gov (United States)

    Cardoso Dos Santos, Marcelina; Goetz, Joan; Bartenlian, Hortense; Wong, Ka-Leung; Charbonniere, Loïc Joanny; Hildebrandt, Niko

    2018-02-20

    Fluorescent nanoparticles (NPs) have become irreplaceable tools for advanced cellular and sub-cellular imaging. While very bright NPs require excitation with UV or visible light, which can create strong autofluorescence of biological components, NIR-excitable NPs without autofluorescence issues exhibit much lower brightness. Here, we show the application of a new type of surface-photosensitized terbium NPs (Tb-NPs) for autofluorescence-free intracellular imaging in live HeLa cells. Combination of exceptionally high brightness, high photostability, and long photoluminecence (PL) lifetimes for highly efficient suppression of the short-lived autofluorescence, allowed for time-gated PL imaging of intracellular vesicles over 72 h without toxicity and at extremely low Tb-NP concentrations down to 12 pM. Detection of highly resolved long-lifetime (ms) PL decay curves from small (~10 µm2) areas within single cells within a few seconds emphasized the unprecedented photophysical properties of Tb-NPs for live-cell imaging that extend well beyond currently available nanometric imaging agents.

  16. Solar Thermochemical Hydrogen Production via Terbium Oxide Based Redox Reactions

    Directory of Open Access Journals (Sweden)

    Rahul Bhosale

    2016-01-01

    Full Text Available The computational thermodynamic modeling of the terbium oxide based two-step solar thermochemical water splitting (Tb-WS cycle is reported. The 1st step of the Tb-WS cycle involves thermal reduction of TbO2 into Tb and O2, whereas the 2nd step corresponds to the production of H2 through Tb oxidation by water splitting reaction. Equilibrium compositions associated with the thermal reduction and water splitting steps were determined via HSC simulations. Influence of oxygen partial pressure in the inert gas on thermal reduction of TbO2 and effect of water splitting temperature (TL on Gibbs free energy related to the H2 production step were examined in detail. The cycle (ηcycle and solar-to-fuel energy conversion (ηsolar-to-fuel efficiency of the Tb-WS cycle were determined by performing the second-law thermodynamic analysis. Results obtained indicate that ηcycle and ηsolar-to-fuel increase with the decrease in oxygen partial pressure in the inert flushing gas and thermal reduction temperature (TH. It was also realized that the recuperation of the heat released by the water splitting reactor and quench unit further enhances the solar reactor efficiency. At TH=2280 K, by applying 60% heat recuperation, maximum ηcycle of 39.0% and ηsolar-to-fuel of 47.1% for the Tb-WS cycle can be attained.

  17. Folate Receptor Targeted Alpha-Therapy Using Terbium-149

    CERN Document Server

    Müller, Cristina; Haller, Stephanie; Dorrer, Holger; Köster, Ulli; Johnston, Karl; Zhernosekov, Konstantin; Türler, Andreas; Schibli, Roger

    2014-01-01

    Terbium-149 is among the most interesting therapeutic nuclides for medical applications. It decays by emission of short-range α-particles (Eα = 3.967 MeV) with a half-life of 4.12 h. The goal of this study was to investigate the anticancer efficacy of a 149Tb-labeled DOTA-folate conjugate (cm09) using folate receptor (FR)-positive cancer cells in vitro and in tumor-bearing mice. 149Tb was produced at the ISOLDE facility at CERN. Radiolabeling of cm09 with purified 149Tb resulted in a specific activity of ~1.2 MBq/nmol. In vitro assays performed with 149Tb-cm09 revealed a reduced KB cell viability in a FR-specific and activity concentration-dependent manner. Tumor-bearing mice were injected with saline only (group A) or with 149Tb-cm09 (group B: 2.2 MBq; group C: 3.0 MBq). A significant tumor growth delay was found in treated animals resulting in an increased average survival time of mice which received 149Tb-cm09 (B: 30.5 d; C: 43 d) compared to untreated controls (A: 21 d). Analysis of blood parameters rev...

  18. Hardness and dielectric characteristics of flux grown terbium aluminate crystals

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, K.K.; Kotru, P.N. [Jammu Univ. (India). Dept. of Physics; Tandon, R.P. [National Physical Laboratory, New Delhi (India); Wanklyn, B.M. [Clarendon Laboratory, University of Oxford, Oxford (United Kingdom)

    1999-01-29

    Results of indentation induced Vickers hardness testing and dielectric studies conducted on flux-grown terbium aluminate crystals are presented. It is shown that the Vickers hardness value (H{sub v}) is independent of indentation time, but depends on the applied load. Applying the concept of Hays and Kendall, the load independent values are estimated for (110) and (001) planes. Differential behaviour in the crack formation of two different planes (110) and (001) is observed, while (001) plane develops Palmqvist cracks in the whole load range of 10-100 g, (110) plane shows a transition from Palmqvist to median cracks at 70 g. The fracture toughness, brittleness index and yield strength are determined for both the planes. The hardness anisotropy is reported. The dielectric constant, dielectric loss and conductivity are shown to be dependent on temperature and frequency of the applied a.c. field. The dielectric constant versus temperature shows a transition peak at 230 C, which remains independent of the frequency of the applied a.c. field in the range 1 kHz-13 MHz. (orig.) 36 refs.

  19. Thermoluminescence of cerium and terbium -doped calcium pyrophosphate

    Energy Technology Data Exchange (ETDEWEB)

    Roman L, J.; Cruz Z, E. [UNAM, Instituto de Ciencias Nucleares, Circuito Exterior, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Lozano R, I. B.; Diaz G, J. A. I., E-mail: jesus.roman@nucleares.unam.mx [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Av. Legaria No. 694, 11500 Mexico D. F. (Mexico)

    2015-10-15

    The aim of this work is to report the thermoluminescence (Tl) response of Calcium Pyrophosphate phosphor doped with Cerium and Terbium impurities (Ca{sub 2}P{sub 2}O{sub 7}:Ce{sup 3+},Tb{sup 3+}). The phosphors were synthesized using the co-precipitation method and annealed at 900 degrees C by two hours for obtain the β phase. The intentional doping with Ce and Tb ions was 1 at.% and 0.1 at.%, whereas in the EDS results the concentration of impurities was 0.39 at.% and 0.05 at.%, respectively. The superficial morphology of phosphor is mainly composed by thin wafers of different size. All samples were exposed to gamma rays from {sup 60}Co in the Gammacell-200 irradiator. The Tl response of the phosphor was measured from Rt up to 350 degrees C and under nitrogen atmosphere in a Harshaw TLD 3500 reader. The glow curves of the Ca{sub 2}P{sub 2}O{sub 7}:Ce{sup 3+},Tb{sup 3+} powders showed a broad intense Tl peak centered at 165 degrees C and a shoulder at approximate 260 degrees C was observed. A linear Tl response in the range of absorbed dose of 0.2 to 10 Gy was obtained. Tl glow curves were analyzed using the initial rise (IR)and computerized glow curve deconvolution methods to evaluate the kinetics parameters such as activation energy (E), frequency factor (s) and kinetic order (b). (Author)

  20. Solvent polarity and oxygen sensitivity, rather than viscosity, determine lifetimes of biaryl-sensitised terbium luminescence.

    Science.gov (United States)

    Walter, Edward R H; Williams, J A Gareth; Parker, David

    2017-12-14

    In a macrocyclic terbium complex incorporating a biaryl sensitiser, the observed variation of emission lifetime is shown to be determined by the solubility of oxygen in the solvent system and the relative energy of the chromophore excited state, rather than any dependence on solvent viscosity.

  1. Arginine-responsive terbium luminescent hybrid sensors triggered by two crown ether carboxylic acids

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Lasheng [Key Laboratory of Theoretical Chemistry of Environment, Ministry of Education, School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Tang, Ke; Ding, Xiaoping [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Wang, Qianming, E-mail: qmwang@scnu.edu.cn [Key Laboratory of Theoretical Chemistry of Environment, Ministry of Education, School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Zhou, Zhan; Xiao, Rui [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China)

    2013-12-01

    Crown ether carboxylic acids constitute main building blocks for the synthesis of terbium containing covalent cross-linked luminescent materials. Both the complexes and the hybrid nanomaterials could exhibit remarkable green emissions in pure water. More importantly, they were found to have a profound effect on the luminescence responses to arginine compared with glutamic acid, histidine, tryptophan, threonine, tyrosine and phenylalanine in aqueous environment. The present study provided the possibility of using a host–guest mechanism as a way of signal transduction based on lanthanide supramolecular hybrid materials. - Highlights: • Crown ether carboxylic acids were found to sensitize terbium ions among a group of ethers. • The complexes and silica hybrid materials were both prepared and characterized. • They could exhibit remarkable green emissions in pure water.

  2. Comparative analysis of conjugated alkynyl chromophore-triazacyclononane ligands for sensitized emission of europium and terbium.

    Science.gov (United States)

    Soulié, Marine; Latzko, Frédéric; Bourrier, Emmanuel; Placide, Virginie; Butler, Stephen J; Pal, Robert; Walton, James W; Baldeck, Patrice L; Le Guennic, Boris; Andraud, Chantal; Zwier, Jurriaan M; Lamarque, Laurent; Parker, David; Maury, Olivier

    2014-07-07

    A series of europium and terbium complexes based on a functionalized triazacyclononane carboxylate or phosphinate macrocyclic ligand is described. The influence of the anionic group, that is, carboxylate, methylphosphinate, or phenylphosphinate, on the photophysical properties was studied and rationalized on the basis of DFT calculated structures. The nature, number, and position of electron-donating or electron-withdrawing aryl substituents were varied systematically within the same phenylethynyl scaffold in order to optimize the brightness of the corresponding europium complexes and investigate their two-photon absorption properties. Finally, the europium complexes were examined in cell-imaging applications, and selected terbium complexes were studied as potential oxygen sensors. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Spectrofluorimetric Determination of Human Serum Albumin Using Terbium-Danofloxacin Probe

    OpenAIRE

    Ramezani, Amir M.; Manzoori, Jamshid L.; Amjadi, Mohammad; Jouyban, Abolghasem

    2012-01-01

    A spectrofluorimetric method is proposed for the determination of human serum albumin (HSA) and bovine serum albumin (BSA) using terbium-danofloxacin (Tb3+-Dano) as a fluorescent probe. These proteins remarkably enhance the fluorescence intensity of the Tb3+-Dano complex at 545 nm, and the enhanced fluorescence intensity of Tb3+-Dano is proportional to the concentration of proteins (HSA and BSA). Optimum conditions for the determination of HSA were investigated and found that the maximum resp...

  4. Genetically Encoded FRET-Sensor Based on Terbium Chelate and Red Fluorescent Protein for Detection of Caspase-3 Activity

    Directory of Open Access Journals (Sweden)

    Alexander S. Goryashchenko

    2015-07-01

    Full Text Available This article describes the genetically encoded caspase-3 FRET-sensor based on the terbium-binding peptide, cleavable linker with caspase-3 recognition site, and red fluorescent protein TagRFP. The engineered construction performs two induction-resonance energy transfer processes: from tryptophan of the terbium-binding peptide to Tb3+ and from sensitized Tb3+ to acceptor—the chromophore of TagRFP. Long-lived terbium-sensitized emission (microseconds, pulse excitation source, and time-resolved detection were utilized to eliminate directly excited TagRFP fluorescence and background cellular autofluorescence, which lasts a fraction of nanosecond, and thus to improve sensitivity of analyses. Furthermore the technique facilitates selective detection of fluorescence, induced by uncleaved acceptor emission. For the first time it was shown that fluorescence resonance energy transfer between sensitized terbium and TagRFP in the engineered construction can be studied via detection of microsecond TagRFP fluorescence intensities. The lifetime and distance distribution between donor and acceptor were calculated using molecular dynamics simulation. Using this data, quantum yield of terbium ions with binding peptide was estimated.

  5. Green light emission in aluminum oxide powders doped with different terbium concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Mariscal B, L; Falcony, C. [IPN, Centro de Investigacion y de Estudios Avanzados, 07360 Ciudad de Mexico (Mexico); Carmona T, S.; Murrieta, H.; Sanchez A, M. A. [UNAM, Instituto de Fisica, 04510 Ciudad de Mexico (Mexico); Vazquez A, R. [IPN, Escuela Superior de Computo, 07738 Ciudad de Mexico (Mexico); Garcia R, C. M., E-mail: mariscal2005@gmail.com [UNAM, Facultad de Ciencias, 04510 Ciudad de Mexico (Mexico)

    2016-11-01

    Different emission intensities presented in aluminum oxide phosphors corresponding to different concentrations of doping performed with terbium are analyzed. The phosphors were synthesized by the evaporation technique and were characterized by photo and cathodoluminescence, X-ray diffraction and EDS techniques for different incorporation percentages of terbium as dopant; they show characteristic transitions in 494, 543, 587 and 622 nm, corresponding to {sup 5}D{sub 4} → {sup 7}F{sub 6}, {sup 5}D{sub 4} → {sup 7}F{sub 5}, {sup 5}D{sub 4} → {sup 7}F{sub 4} and {sup 5}D{sub 4} → {sup 7}F{sub 3}, respectively when they are excited with λ{sub exc} = 380 nm wavelength at room temperature. The results of X-ray diffraction show the presence of α-Al{sub 2}O{sub 3} phases with peaks located at 2θ = 25.78, 35.34, 37.96, 43.56, 45.8, 52.74, 57.7, 61.5, 66.74, 68.44, 77.12 and 80.94, and the δ-Al{sub 2}O-3 phase 2θ = 32.82, 45.8, 61.36 and 66.74. These compounds were heat treated for two hours at 1100 degrees Celsius. EDS analyzes indicate that these compounds have close to 60% oxygen around of 40% aluminum in the presence of terbium as dopant which indicates a stoichiometry close to the expected one for alumina. (Author)

  6. Graphene quantum dots-terbium ions as novel sensitive and selective time-resolved luminescent probes.

    Science.gov (United States)

    Llorent-Martínez, Eulogio J; Durán, Gema M; Ríos, Ángel; Ruiz-Medina, Antonio

    2018-01-01

    We propose an alternative approach for the development of analytical methods based on terbium-sensitized luminescence (TSL). TSL is based on the complexation between Tb(III) ions and fluorescent organic compounds that have appropriate functional groups to complex with Tb(III). We report the use of graphene quantum dot (GQDs) nanoparticles to improve the sensitivity and selectivity of TSL detection. GQDs can react with terbium ions through the carboxylic groups present in their structure. These Tb(III)-GQD complexes, formed in situ in aqueous solution, can be used as time-resolved luminescent probes. Ascorbic acid was selected as a target analyte to demonstrate the suitability of the proposed method. The selectivity of the TSL method was highly improved for most of the interferences tested. Under the optimum conditions [Tb(III) concentration 5 × 10-4 mol L-1, GQD concentration 4 mg L-1], a minimum 100% increase in selectivity was observed for several vitamins and common cations that may be present in the samples to be analyzed. In addition, the analytical signal showed a 30% enhancement with the use of GQDs compared with the use of merely Tb(III) ions, with a detection limit of 0.12 μg mL-1. The repeatability and intermediate precision were lower than 3% and 5%, respectively. From the results obtained, the implementation of GQDs in TSL can lead to the development of novel time-resolved luminescent probes with high analytical potential. Graphical abstract Quenching of Tb(III)-graphene quantum dot (GQD) luminescence by ascorbic acid (AA). TBL terbium-sensitized luminescence.

  7. Fluorescence study of some terbium-oligopeptide complexes in methanolic solution.

    Science.gov (United States)

    Rabouan, S; Delage, J; Durand, W; Prognon, P; Barthes, D

    2000-04-03

    This study concerned the use of lanthanide chelates to detect glycyl-leucyl-phenylalanine (GLF) and its homologues. Spectroscopic analysis of peptides without or with terbium complexation revealed the formation of (LF)(3)(Tb)(2), (GF)(3)(Tb)(2), (GLF)(3)(Tb)(2) and (FL)(4)Tb, (FG)(4)Tb complexes with high stability constants in methanolic solutions (pK(d)>13). Lanthanide chelate emission displayed a large Stokes shift (>270 nm), which allowed Tb chelates of GLF and its derivatives to be used for detection purposes. However, this preliminary study indicated some important limitations associated with lanthanide chelation, such as high methanolic content.

  8. Electromagnetic properties of terbium gallium garnet at millikelvin temperatures and low photon energy

    Science.gov (United States)

    Kostylev, Nikita; Goryachev, Maxim; Bushev, Pavel; Tobar, Michael E.

    2017-07-01

    Electromagnetic properties of single crystal terbium gallium garnet are characterised from room down to millikelvin temperatures using the whispering gallery mode method. Microwave spectroscopy is performed at low powers equivalent to a few photons in energy and conducted as functions of the magnetic field and temperature. A phase transition is detected close to the temperature of 3.5 K. This is observed for multiple whispering gallery modes causing an abrupt negative frequency shift and a change in transmission due to extra losses in the new phase caused by a change in complex magnetic susceptibility.

  9. Nuclear excitation functions from 40 to 200 MeV proton irradiation of terbium

    Energy Technology Data Exchange (ETDEWEB)

    Engle, Jonathan W., E-mail: jwengle@lanl.gov; Mashnik, Stepan G.; Parker, Lauren A.; Jackman, Kevin R.; Bitteker, Leo J.; Ullmann, John L.; Gulley, Mark S.; Pillai, Chandra; John, Kevin D.; Birnbaum, Eva R.; Nortier, Francois M.

    2016-01-01

    Nuclear formation cross sections are reported for 26 radionuclides, measured with 40–200 MeV proton irradiations of terbium foils. These data provide the basis for the production of medically relevant radionuclides (e.g., {sup 152}Tb, {sup 155}Tb, {sup 155}Eu, and {sup 156}Eu) and {sup 153}Gd, a potential source used in ongoing efforts to characterize stellar nucleosynthesis routes. Computational predictions from the ALICE2011, CEM03.03, Bertini, and INCL + ABLA codes are compared with newly measured data to contribute to the ongoing process of code development, and yields are calculated for selected radionuclides using measured data.

  10. Micelle-enhanced and terbium-sensitized spectrofluorimetric determination of gatifloxacin and its interaction mechanism

    Science.gov (United States)

    Guo, Changchuan; Wang, Lei; Hou, Zhun; Jiang, Wei; Sang, Lihong

    2009-05-01

    A terbium-sensitized spectrofluorimetric method using an anionic surfactant, sodium dodecyl benzene sulfonate (SDBS), was developed for the determination of gatifloxacin (GFLX). A coordination complex system of GFLX-Tb 3+-SDBS was studied. It was found that SDBS significantly enhanced the fluorescence intensity of the complex (about 11-fold). Optimal experimental conditions were determined as follows: excitation and emission wavelengths of 331 and 547 nm, pH 7.0, 2.0 × 10 -4 mol l -1 terbium (III), and 2.0 × 10 -4 mol l -1 SDBS. The enhanced fluorescence intensity of the system (Δ If) showed a good linear relationship with the concentration of GFLX over the range of 5.0 × 10 -10 to 5.0 × 10 -8 mol l -1 with a correlation coefficient of 0.9996. The detection limit (3 σ) was determined as 6.0 × 10 -11 mol l -1. This method has been successfully applied to the determination of GFLX in pharmaceuticals and human urine/serum samples. Compared with most of other methods reported, the rapid and simple procedure proposed in the text offers higher sensitivity, wider linear range, and better stability. The interaction mechanism of the system is also studied by the research of ultraviolet absorption spectra, surface tension, solution polarity and fluorescence polarization.

  11. Circularly Polarized Luminescence in Enantiopure Europium and Terbium Complexes with Modular, All-Oxygen Donor Ligands

    Science.gov (United States)

    Seitz, Michael; Do, King; Ingram, Andrew J.; Moore, Evan G.; Muller, Gilles; Raymond, Kenneth N.

    2009-01-01

    Abstract: Circulaly polarized luminescence from terbium(III) complexed and excited by chiral antenna ligands gives strong emission The modular synthesis of three new octadentate, enantiopure ligands are reported - one with the bidentate chelating unit 2-hydroxyisophthalamide (IAM) and two with 1-hydroxy-2-pyridinone (1,2-HOPO) units. A new design principle is introduced for the chiral, non-racemic hexamines which constitute the central backbones for the presented class of ligands. The terbium(III) complex of the IAM ligand, as well as the europium(III) complexes of the 1,2-HOPO ligands are synthesized and characterized by various techniques (NMR, UV, CD, luminescence spectroscopy). All species exhibit excellent stability and moderate to high luminescence efficiency (quantum yields ΦEu = 0.05–0.08 and ΦTb = 0.30–0.57) in aqueous solution at physiological pH. Special focus is put onto the properties of the complexes in regard to circularly polarized luminescence (CPL). The maximum luminescence dissymmetry factors (glum) in aqueous solution are high with |glum|max = 0.08 – 0.40. Together with the very favorable general properties (good stability, high quantum yields, long lifetimes), the presented lanthanide complexes can be considered as good candidates for analytical probes based on CPL in biologically relevant environments. PMID:19639983

  12. Luminescent method of determination of composition of europium and terbium complexes in solution by change of intensity ratio of luminescence bands

    Energy Technology Data Exchange (ETDEWEB)

    Bel' tyukova, S.V.; Nazarenko, N.A.; Poluehktov, N.S.

    1982-03-01

    The complexes of europium and terbium with phenanthroline, ethylenediaminetetraacetate, nitrilotriacetate, some acids-phenol derivatives and ..beta..-diketones series have been used as an example to demonstrate that the value of the ratio of intensities on the two bands of europium(terbium) luminescence spectra - the one corresponding to the hypersensitive'' transition and the other, to the magnetic dipole one - can be used for determination of the complexes composition in solutions.

  13. Thermo-transferred thermoluminescence (TTTl) in potassium-yttrium double fluoride doped with terbium

    Energy Technology Data Exchange (ETDEWEB)

    Gallegos, A.; Rivera, T.; Diaz G, J. A. [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Legaria 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico); Azorin, J. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico); Azorin, J. C. [Universidad de Guanajuato, Division de Ciencias e Ingenierias-Campus Leon, Lomas del Bosque No. 103, Col. Lomas del Campestre, 37000 Leon, Guanajuato (Mexico); Licona, R.; Rivas, F.; Hernandez C, G. [Benemerita Universidad Autonoma de Puebla, Facultad de Ciencias Quimicas, 14 Sur y San Claudio, Ciudad Universitaria, Puebla de Zaragoza, Puebla (Mexico); Khaidukov, N. [Institute of General and Inorganic Chemistry, Lenin SK 11 Prospect 31, Moscow 117907 (Russian Federation)

    2011-02-15

    This paper presents results of studying the thermo-transferred thermoluminescence (TTTl) phenomenon in potassium-yttrium double fluoride doped with terbium (K{sub 2}YF{sub 5:}Tb) at different impurity concentrations (0.8%, 0.95% and 0.99%). Previously to study the TTTl phenomenon, structural characterization and chemical composition of the materials were determined. The structural studies were conducted using a scanning electron microscope; meanwhile, chemical composition was analyzed using energy dispersive X-ray spectroscopy. Thermoluminescence kinetics was studied irradiating the samples with {sup 137}Cs gamma rays as well as with {sup 90}Sr/{sup 90}Y beta rays, analyzing the glow curves by the deconvolution method for obtaining the kinetic parameters. (Author)

  14. The influence of pressure on the photoluminescence properties of a terbium-adipate framework

    Science.gov (United States)

    Spencer, Elinor C.; Zhao, Jing; Ross, Nancy L.; Andrews, Michael B.; Surbella, Robert G.; Cahill, Christopher L.

    2013-06-01

    The influence of pressure (over the 0-4.7 GPa range) on the photoluminescence emissions and crystal structure of the known 3D terbium-adipate metal-organic framework material Tb-GWMOF6 has been evaluated by high-pressure single-crystal X-ray diffraction and spectroscopic techniques. The results from this study show that this complex lanthanide framework structure undergoes three phase transitions within the 0-4 GPa pressure range that involve alterations in the number of symmetry independent Tb3+ ion sites within the crystal lattice. These pressure induced modifications to the structure of Tb-GWMOF6 lead to pronounced changes in the profiles of the 5D4→7F5 emission spectra of this complex.

  15. Terbium Radionuclides for Theranostics Applications: A Focus On MEDICIS-PROMED

    Science.gov (United States)

    Cavaier, R. Formento; Haddad, F.; Sounalet, T.; Stora, T.; Zahi, I.

    A new facility, named CERN-MEDICIS, is under construction at CERN to produce radionuclides for medical applications. In parallel, the MEDICIS-PROMED, a Marie Sklodowska-Curie innovative training network of the Horizon 2020 European Commission's program, is being coordinated by CERN to train young scientists on the production and use of innovative radionuclides and develop a network of experts within Europe. One program within MEDICIS-PROMED is to determine the feasibility of producing innovative radioisotopes for theranostics using a commercial middle-sized high-current cyclotron and the mass separation technology developed at CERN-MEDICIS. This will allow the production of high specific activity radioisotopes not achievable with the common post-processing by chemical separation. Radioisotopes of scandium, copper, arsenic and terbium have been identified. Preliminary studies of activation yield and irradiation parameters optimization for the production of Tb-149 will be described.

  16. Dielectric and conducting behavior of gadolinium-terbium fumarate heptahydrate crystals

    Science.gov (United States)

    Shah, M. D.; Want, B.

    2015-07-01

    Gadolinium-terbium fumarate heptahydrate crystals were grown in silica gel by using single gel diffusion technique. The crystals were characterized by different physico-chemical techniques of characterization. Powder X-ray diffraction results showed that the grown material is purely crystalline in nature. Elemental analyses suggested the chemical formula of the compound to be Gd Tb (C4H2O4)3ṡ7H2O. Energy dispersive X-ray analysis confirmed the presence of Gd and Tb in the title compound. The dielectric and conductivity studies of the grown compound were carried as function of frequency of applied field and the temperature. The grown material showed a dielectric anomaly which was correlated with its thermal behavior. The ac conductivity of the material showed Jonscher's power law behavior: σ(ω)=σo+Aωs, with a temperature-dependent power exponent s(<1). The conductivity was found to be a function of temperature and frequency.

  17. Highly sensitive detection of dipicolinic acid with a water-dispersible terbium-metal organic framework.

    Science.gov (United States)

    Bhardwaj, Neha; Bhardwaj, Sanjeev; Mehta, Jyotsana; Kim, Ki-Hyun; Deep, Akash

    2016-12-15

    The sensitive detection of dipicolinic acid (DPA) is strongly associated with the sensing of bacterial organisms in food and many types of environmental samples. To date, the demand for a sensitive detection method for bacterial toxicity has increased remarkably. Herein, we investigated the DPA detection potential of a water-dispersible terbium-metal organic framework (Tb-MOF) based on the fluorescence quenching mechanism. The Tb-MOF showed a highly sensitive ability to detect DPA at a limit of detection of 0.04nM (linear range of detection: 1nM to 5µM) and also offered enhanced selectivity from other commonly associated organic molecules. The present study provides a basis for the application of Tb-MOF for direct, convenient, highly sensitive, and specific detection of DPA in the actual samples. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. A New Bis(phthalocyaninato) Terbium Single-Ion Magnet with an Overall Excellent Magnetic Performance.

    Science.gov (United States)

    Chen, Yuxiang; Ma, Fang; Chen, Xiaoxiang; Dong, Bowei; Wang, Kang; Jiang, Shangda; Wang, Chiming; Chen, Xin; Qi, Dongdong; Sun, Haoling; Wang, Bingwu; Gao, Song; Jiang, Jianzhuang

    2017-11-20

    Bulky and strong electron-donating dibutylamino groups were incorporated onto the peripheral positions of one of the two phthalocyanine ligands in the bis(phthalocyaninato) terbium complex, resulting in the isolation of heteroleptic double-decker (Pc)Tb{Pc[N(C4H9)2]8} {Pc = phthalocyaninate; Pc[N(C4H9)2]8 = 2,3,9,10,16,17,23,24-octakis(dibutylamino)phthalocyaninate} with the nature of an unsymmetrical molecular structure, a square-antiprismatic coordination geometry, an intensified coordination field strength, and the presence of organic radical-f interaction. As a total result of all these factors, this sandwich-type tetrapyrrole lanthanide single-ion magnet (SIM) exhibits an overall enhanced magnetic performance including a high blocking temperature (TB) of 30 K and large effective spin-reversal energy barrier of Ueff = 939 K, rendering it the best sandwich-type tetrapyrrole lanthanide SIM reported thus far.

  19. Ultralarge magneto-optic rotations and rotary dispersion in terbium gallium garnet single crystal.

    Science.gov (United States)

    Shaheen, Amrozia; Majeed, Hassaan; Anwar, Muhammad Sabieh

    2015-06-10

    We report systematically acquired data on the Verdet constant of terbium gallium garnet for wavelengths ranging from visible to near-infrared (405-830 nm) regime. Our experimental method of Stokes polarimetry is based on the Fourier decomposition of the received light intensity and allows unambiguous determination of both the Faraday rotation and the ellipticity of the emergent light. Temperature-dependent investigations in the range of 8-300 K extend earlier reports and verify the Verdet's constant direct dependence on the magnetization, whose first-order approximation is simply a manifestation of the Curie's law. Further, a least-squares fitting of the experimental data correlates well with theoretical predictions. At a wavelength of 405 nm and temperature of 8 K, the rotation is approximately 500°.

  20. Terbium fluorescence as a sensitive, inexpensive probe for UV-induced damage in nucleic acids

    Energy Technology Data Exchange (ETDEWEB)

    El-Yazbi, Amira F.; Loppnow, Glen R., E-mail: glen.loppnow@ualberta.ca

    2013-07-05

    Graphical abstract: -- Highlights: •Simple, inexpensive, mix-and-read assay for positive detection of DNA damage. •Recognition of undamaged DNA via hybridization to a hairpin probe. •Terbium(III) fluorescence reports the amount of damage by binding to ssDNA. •Tb/hairpin is a highly selective and sensitive fluorescent probe for DNA damage. -- Abstract: Much effort has been focused on developing methods for detecting damaged nucleic acids. However, almost all of the proposed methods consist of multi-step procedures, are limited, require expensive instruments, or suffer from a high level of interferences. In this paper, we present a novel simple, inexpensive, mix-and-read assay that is generally applicable to nucleic acid damage and uses the enhanced luminescence due to energy transfer from nucleic acids to terbium(III) (Tb{sup 3+}). Single-stranded oligonucleotides greatly enhance the Tb{sup 3+} emission, but duplex DNA does not. With the use of a DNA hairpin probe complementary to the oligonucleotide of interest, the Tb{sup 3+}/hairpin probe is applied to detect ultraviolet (UV)-induced DNA damage. The hairpin probe hybridizes only with the undamaged DNA. However, the damaged DNA remains single-stranded and enhances the intrinsic fluorescence of Tb{sup 3+}, producing a detectable signal directly proportional to the amount of DNA damage. This allows the Tb{sup 3+}/hairpin probe to be used for sensitive quantification of UV-induced DNA damage. The Tb{sup 3+}/hairpin probe showed superior selectivity to DNA damage compared to conventional molecular beacons probes (MBs) and its sensitivity is more than 2.5 times higher than MBs with a limit of detection of 4.36 ± 1.2 nM. In addition, this probe is easier to synthesize and more than eight times cheaper than MBs, which makes its use recommended for high-throughput, quantitative analysis of DNA damage.

  1. Fine- and hyperfine structure investigations of even configuration system of atomic terbium

    Science.gov (United States)

    Stefanska, D.; Elantkowska, M.; Ruczkowski, J.; Furmann, B.

    2017-03-01

    In this work a parametric study of the fine structure (fs) and the hyperfine structure (hfs) for the even-parity configurations of atomic terbium (Tb I) is presented, based in considerable part on the new experimental results. Measurements on 134 spectral lines were performed by laser induced fluorescence (LIF) in a hollow cathode discharge lamp; on this basis, the hyperfine structure constants A and B were determined for 52 even-parity levels belonging to the configurations 4f85d6s2, 4f85d26s or 4f96s6p; in all the cases those levels were involved in the transitions investigated as the lower levels. For 40 levels the hfs was examined for the first time, and for the remaining 12 levels the new measurements supplement our earlier results. As a by-product, also preliminary values of the hfs constants for 84 odd-parity levels were determined (the investigations of the odd-parity levels system in the terbium atom are still in progress). This huge amount of new experimental data, supplemented by our earlier published results, were considered for the fine and hyperfine structure analysis. A multi-configuration fit of 7 configurations was performed, taking into account second-order of perturbation theory, including the effects of closed shell-open shell excitations. Predicted values of the level energies, as well as of magnetic dipole and electric quadrupole hyperfine structure constants A and B, are quoted in cases when no experimental values are available. By combining our experimental data with our own semi-empirical procedure it was possible to identify correctly the lower and upper level of the line 544.1440 nm measured by Childs with the use of the atomic-beam laser-rf double-resonance technique (Childs, J Opt Soc Am B 9;1992:191-6).

  2. Structural and optical characterization of terbium doped ZnGa2O4 thin films deposited by RF magnetron sputtering

    Science.gov (United States)

    Somasundaram, K.; Girija, K. G.; Sudarsan, V.; Selvin, P. Christopher; Vatsa, R. K.

    2016-05-01

    Tb3+ doped ZnGa2O4 nanophosphor (21 nm) has been synthesized via low temperature polyol route and subsequently thin films of the same were deposited on glass and ITO substrates by RF magnetron sputtering. The films were characterized by X-ray Diffraction and luminescence measurements. The XRD pattern showed that Tb3+ doped ZnGa2O4 nanophosphor has a cubic spinel phase. Luminescence behavior of the nanophosphor and as deposited sputtered film was investigated. The PL emission spectra of nanophosphor gave a broad ZnGa2O4 host emission band along with a strong terbium emission and the thin films showed only broad host emission band and there was no terbium ion emission.

  3. Determination of fluoxetine in pharmaceutical and biological samples based on the silver nanoparticle enhanced fluorescence of fluoxetine-terbium complex.

    Science.gov (United States)

    Lotfi, Ali; Manzoori, Jamshid L

    2016-11-01

    In this study, a simple and sensitive spectrofluorimetric method is presented for the determination of fluoxetine based on the enhancing effect of silver nanoparticles (AgNPs) on the terbium-fluoxetine fluorescence emission. The AgNPs were prepared by a simple reduction method and characterized by UV-Vis spectroscopy and transmission electron microscopy. It was indicated that these AgNPs have a remarkable amplifying effect on the terbium-sensitized fluorescence of fluoxetine. The effects of various parameters such as AgNP and Tb(3+) concentration and the pH of the media were investigated. Under obtained optimal conditions, the fluorescence intensity of the terbium-fluoxetine-AgNP system was enhanced linearly by increasing the concentration of fluoxetine in the range of 0.008 to 19 mg/L. The limit of detection (b + 3s) was 8.3 × 10(-4) mg/L. The interference effects of common species found in real samples were also studied. The method had good linearity, recovery, reproducibility and sensitivity, and was satisfactorily applied for the determination of fluoxetine in tablet formulations, human urine and plasma samples. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  4. Neutron Diffraction and Electrical Transport Studies on Magnetic Transition in Terbium at High Pressures and Low Temperatures

    Science.gov (United States)

    Thomas, Sarah; Montgomery, Jeffrey; Tsoi, Georgiy; Vohra, Yogesh; Weir, Samuel; Tulk, Christopher; Moreira Dos Santos, Antonio

    2013-06-01

    Neutron diffraction and electrical transport measurements have been carried out on the heavy rare earth metal terbium at high pressures and low temperatures in order to elucidate its transition from a helical antiferromagnetic to a ferromagnetic ordered phase as a function of pressure. The electrical resistance measurements using designer diamonds show a change in slope as the temperature is lowered through the ferromagnetic Curie temperature. The temperature of the ferromagnetic transition decreases at a rate of -16.7 K/GPa till 3.6 GPa, where terbium undergoes a structural transition from hexagonal close packed (hcp) to an α-Sm phase. Above this pressure, the electrical resistance measurements no longer exhibit a change in slope. In order to confirm the change in magnetic phase suggested by the electrical resistance measurements, neutron diffraction measurements were conducted at the SNAP beamline at the Oak Ridge National Laboratory. Measurements were made at pressures to 5.3 GPa and temperatures as low as 90 K. An abrupt increase in peak intensity in the neutron diffraction spectra signaled the onset of magnetic order below the Curie temperature. A magnetic phase diagram of rare earth metal terbium will be presented to 5.3 GPa and 90 K based on these studies.

  5. Study of Silver Nanoparticles Sensitized Fluorescence and Second-Order Scattering of Terbium(III-Pefloxacin Mesylate Complex and Determination of Pefloxacin Mesylate

    Directory of Open Access Journals (Sweden)

    Aiyun Li

    2014-01-01

    Full Text Available α-Keto acid of pefloxacin mesylate (PFLX can form the complex with Terbium(III. The intramolecular energy from PFLX to Terbium(III ion takes place when excited, and thus Terbium(III excited state is formed and then emits the characteristic fluorescence of Terbium(III, locating at 490, 545, 580, and 620 nm. The second-order scattering (SOS peak at 545 nm also appears for the complex with the exciting wavelength of 273 nm. When the silver nanoparticles are added to the system, the luminescence intensity at 545 nm greatly increased. So, with the adding of nanoparticles to the Terbium(III-PFLX complex, not only is the intramolecular energy promoted but also the SOS intensity is enhanced. The experimental results show that it is the silver nanoparticles with certain size and certain concentration which can greatly enhance the fluorescence-SOS intensity, and the relative intensity at 545 nm is proportional to the amount of PFLX. Based on this phenomenon, a novel method for the determination of PFLX has been developed and applied to the determination of PFLX in capsule and serum samples.

  6. Influence of crystalline structure on the luminescence properties of terbium orthotantalates

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, Kisla P.F. [Departamento de Química, Universidade Federal de Ouro Preto, Campus Morro do Cruzeiro, ICEB II, Ouro Preto 35400-000, Minas Gerais (Brazil); Carmo, Alexandre P. [Instituto Federal Fluminense, Campus Cabo Frio, RJ 28909-971 (Brazil); Bell, Maria J.V. [Departamento de Física, Universidade Federal de Juiz de Fora, Juiz de Fora 36036-330, MG (Brazil); Dias, Anderson, E-mail: anderson_dias@iceb.ufop.br [Departamento de Química, Universidade Federal de Ouro Preto, Campus Morro do Cruzeiro, ICEB II, Ouro Preto 35400-000, Minas Gerais (Brazil)

    2013-06-15

    Terbium orthotantalate powders were produced with M-fergusonite type (I2/a) and M′-fergusonite type (P2/a) structures. The samples were studied by X-ray diffraction, Raman scattering, and photoluminescence measurements (emission and decay curves). The results showed that crystalline materials were obtained with all the 18 Raman-active modes predicted by group theory calculations. Also, it was observed through photoluminescence decay curves that the Tb{sup 3+} ions occupies only one-symmetry site in both crystallographic arrangements. Photoluminescence emission curves exhibited some variation in spectral shape, peak position, and relative intensity as a consequence of their different crystalline arrangements. The dominated emission of Tb{sup 3+} ({sup 5}D{sub 4}→{sup 7}F{sub 5}) is centered with a maximum intensity at 549.2 nm (M-type) and 543.0 nm (M′-type). Fluorescence lifetimes for M-TbTaO{sub 4} and M′-TbTaO{sub 4} were determined as 33.4 μs and 1.25 ms, respectively. M′-type materials seems to be the most suitable for luminescent devices and could be a potential green luminescent material due to the strongest emission if compared with the M-fergusonite type. -- Highlights: ► Terbium orthotantalates were prepared in two different crystalline structures: I2/a and P2/a. ► XRD and Raman scattering showed that the different space groups obtained were exhibited all the 18 Raman-active modes. ► PL decay curves that the Tb{sup 3+} ions occupies only one-symmetry site in both crystallographic arrangements. ► Dominated emission of Tb{sup 3+} ({sup 5}D{sub 4}→{sup 7}F{sub 5}) is centered with a maximum intensity at 549 nm (M-type) and 543 nm (M′-type). ► Fluorescence lifetimes for M-TbTaO{sub 4} and M′-TbTaO{sub 4} were determined as 33.4 μs and 1.25 ms, respectively.

  7. Laser control and temperature switching of luminescence intensity in photostable transparent film based on terbium(III) β-diketonate complex

    Science.gov (United States)

    Lapaev, Dmitry V.; Nikiforov, Victor G.; Safiullin, Georgy M.; Lobkov, Vladimir S.; Salikhov, Kev M.; Knyazev, Andrey A.; Galyametdinov, Yury G.

    2014-11-01

    The study of the terbium(III) and gadolinium(III) β-diketonate complexes by photoluminescence spectroscopy reveals considerable changes of the photophysical properties of the complexes under the UV laser irradiation. The measurements show the enhancement of the luminescence intensities in the vitrified transparent film of the terbium(III) complex as well as the gadolinium(III) complex under the 337 nm laser irradiation at room temperature. The irradiated film of the terbium(III) complex restores the initial photophysical properties after heating close to the melting temperature (∼353 K) and cooling. We observe no change of the luminescent properties of the irradiated film for months. These features can be used for the design of new lanthanide-based photostable systems with laser control of the luminescence intensity.

  8. Development of functionalized terbium fluorescent nanoparticles for antibody labeling and time-resolved fluoroimmunoassay application.

    Science.gov (United States)

    Ye, Zhiqiang; Tan, Mingqian; Wang, Guilan; Yuan, Jingli

    2005-01-15

    Silica-based functionalized terbium fluorescent nanoparticles were prepared, characterized and developed as a fluorescence probe for antibody labeling and time-resolved fluoroimmunoassay. The nanoparticles were prepared in a water-in-oil (W/O) microemulsion containing a strongly fluorescent Tb(3+) chelate, N,N,N(1),N(1)-[2,6-bis(3'-aminomethyl-1'-pyrazolyl)phenylpyridine] tetrakis(acetate)-Tb(3+) (BPTA-Tb(3+)), Triton X-100, octanol, and cyclohexane by controlling copolymerization of tetraethyl orthosilicate (TEOS) and 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane (AEPS) with ammonia water. The characterizations by transmission electron microscopy and fluorometric methods show that the nanoparticles are spherical and uniform in size, 45 +/- 3nm in diameter, strongly fluorescent with fluorescence quantum yield of 10% and a long fluorescence lifetime of 2.0ms. The amino groups directly introduced to the nanoparticle's surface by using AEPS in the preparation made the surface modification and bioconjugation of the nanoparticles easier. The nanoparticle-labeled anti-human alpha-fetoprotein antibody was prepared and used for time-resolved fluoroimmunoassay of alpha-fetoprotein (AFP) in human serum samples. The assay response is linear from 0.10ngml(-1) to about 100ngml(-1) with the detection limit of 0.10ngml(-1). The coefficient variations (CVs) of the method are less than 9.0%, and the recoveries are in the range of 84-98% for human serum sample measurements.

  9. Highly efficient precipitation of phosphoproteins using trivalent europium, terbium, and erbium ions

    Energy Technology Data Exchange (ETDEWEB)

    Guezel, Yueksel; Rainer, Matthias; Mirza, Munazza Raza; Bonn, Guenther K. [Leopold-Franzens University, Institute of Analytical Chemistry and Radiochemistry, Innsbruck (Austria)

    2012-05-15

    This study describes a highly efficient method for the selective precipitation of phosphoproteins by trivalent europium, terbium, and erbium metal ions. These metal cations belong to the group of lanthanides and are known to be hard acceptors with an overwhelming preference for oxygen-containing anions such as phosphates to which they form very tight ionic bonds. The method could be successfully applied to specifically precipitate phosphoproteins from complex samples including milk and egg white by forming solid metal-protein complexes. Owing to the low solubility product of the investigated lanthanide salts, the produced metal-protein complexes showed high stability. The protein pellets were extensively washed to remove nonphosphorylated proteins and contaminants. For the analysis of proteins the pellets were first dissolved in 30 % formic acid and subjected to matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) MS. For peptide mass-fingerprint analysis the precipitated phosphoproteins were enzymatically digested using microwave-assisted digestion. The method was found to be highly specific for the isolation and purification of phosphoproteins. Protein quantification was performed by colorimetric detection of total precipitated phosphoproteins and revealed more than 95 % protein recovery for each lanthanide salt. (orig.)

  10. A Terbium Sensitized Luminescence Method for the Assay of Flubiprofen in Pharmaceutical Formulations

    Directory of Open Access Journals (Sweden)

    Salma M.Z. Al-Kindy

    2014-12-01

    Full Text Available A sensitive time-resolved luminescence method for the determination of flubiprofen (FLP in methanol and in aqueous solution is described. The method is based on the luminescence sensitization of terbium (Tb3+ by the formation of a ternary complex with FLP in the presence of 4,7 diphenyl 1,10 phenanthroline (DPP as co-ligand, and Tween-20 as surfactant. The signal for Tb-FLP-DPP was monitored at λex  = 285 nm and λem  = 552 nm. Optimum conditions for the formation of the complex in an aqueous system were TRIS buffer, pH 8.0, DPP (2.5Å~10−7  M, Tween-20 (0.30% and 4Å~10-5  mol L-1  of Tb3+  which allowed the determination of 20–1000 ng mL-1  of FLP with a limit of detection (LOD of 10 ng mL-1 . The relative standard deviations of the method ranged between 0.6 and 1.4% indicating excellent reproducibility of the method. The proposed method was successfully applied for the assays of FLP in pharmaceutical formulations and spiked tap water samples with average recoveries of 87% – 95%.

  11. Sensitization effects of supramolecular assemblies on the luminescence of terbium-ion prulifloxacin complexes

    Energy Technology Data Exchange (ETDEWEB)

    Wang Hong; Yi Chongyue; Li Xue; Fang Fang [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Yang Yajiang, E-mail: yjyang@mail.hust.edu.c [School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2011-04-15

    Luminescence enhancement of terbium-ion prulifloxacin complexes (Tb(III)-PUFX) in supramolecular hydrogels formed by assembly of 1,3:2,4-di-O-benzylidene-D-sorbitol (DBS) was investigated by steady-state fluorescence, varying temperature fluorescence and time-resolved fluorescence. The luminescence images show that Tb(III)-PUFX were dispersed in the DBS gels. The luminescence intensity of Tb(III)-PUFX in the DBS gels was significantly increased in comparison with that in corresponding aqueous solutions. The varying temperature fluorescent spectra show that the luminescence intensity of Tb(III)-PUFX decreased with an increase in the temperature. This implies that the luminescence enhancement of Tb(III)-PUFX is related to the dissociation and the formation of the DBS assemblies. Time-resolved fluorescence measurements show slower rotational motion in DBS gels in comparison with that in the corresponding aqueous solutions. This may be ascribed to a unique microstructure of three-dimensional network formed by DBC aggregates, resulting in deactivation of the nonradiative relaxation. The images of field emission scanning electron microscopy and polarized optical microscopy indicate that the morphology of the DBS assemblies was not influenced upon addition of Tb(III)-PUFX to the DBS gels.

  12. A Nanoscale Multiresponsive Luminescent Sensor Based on a Terbium(III) Metal-Organic Framework.

    Science.gov (United States)

    Dang, Song; Wang, Ting; Yi, Feiyan; Liu, Qinghui; Yang, Weiting; Sun, Zhong-Ming

    2015-08-01

    A nanoscale terbium-containing metal-organic framework (nTbL), with a layer-like structure and [H2 NMe2 ](+) cations located in the framework channels, was synthesized under hydrothermal conditions. The structure of the as-prepared sample was systematically confirmed by powder XRD and elemental analysis; the morphology was characterized by field-emission SEM and TEM. The photoluminescence studies revealed that rod-like nTbL exhibited bright-green emission, corresponding to (5)D4 →(7)FJ (J=6-3) transitions of the Tb(3+) ion under excitation. Further sensing measurements revealed that as-prepared nTbL could be utilized as a multiresponsive luminescent sensor, which showed significant and exclusive detection ability for Fe(3+) ions and phenylmethanol. These results highlight the practical applications of lanthanide-containing metal-organic frameworks as fluorescent probes. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Terbium-Doped VO2 Thin Films: Reduced Phase Transition Temperature and Largely Enhanced Luminous Transmittance.

    Science.gov (United States)

    Wang, Ning; Duchamp, Martial; Dunin-Borkowski, Rafal E; Liu, Shiyu; Zeng, XianTing; Cao, Xun; Long, Yi

    2016-01-26

    Vanadium dioxide (VO2) is a well-known thermochromic material with large IR modulating ability, promising for energy-saving smart windows. The main drawbacks of VO2 are its high phase transition temperature (τ(c) = 68°C), low luminous transmission (T(lum)), and weak solar modulating ability (ΔT(sol)). In this paper, the terbium cation (Tb(3+)) doping was first reported to reduce τ(c) and increase T(lum) of VO2 thin films. Compared with pristine VO2, 2 at. % doping level gives both enhanced T(lum) and ΔT(sol) from 45.8% to 54.0% and 7.7% to 8.3%, respectively. The T(lum) increases with continuous Tb(3+) doping and reaches 79.4% at 6 at. % doping level, representing ∼73.4% relative increment compared with pure VO2. This has surpassed the best reported doped VO2 thin films. The enhanced thermochromic properties is meaningful for smart window applications of VO2 materials.

  14. Luminescent investigations of terbium(III) biosorption as a surrogate for heavy metals and radionuclides.

    Science.gov (United States)

    Achyuthan, Komandoor E; Arango, Dulce C; Carles, Elizabeth L; Cutler, Christopher E; Meyer, Lauren A; Brozik, Susan M

    2009-07-01

    We describe a metal transport system for investigating the interfacial interactions between the anionic surface charge of a gram-negative bacterium (Escherichia coli) and a trivalent cationic metal, Tb3+. We believe this is the first description of the uptake kinetics, sub- and intracellular distribution, and temporal fate of Tb3+ ion in E. coli. We used the luminescence of the terbium-dipicolinic acid chelate to study metal ion transport. The bacteria had a high tolerance for the metal (IC(50) = 4 mM Tb3+). Metal ion transport was passive and metabolism independent. The uptake kinetics rapidly reached a maximum within 15 min, followed by a stasis for 60 min, and declining thereafter between 120 and 240 min, resulting in a biphasic curve. During this period, greater than one-third of the metal ion was sequestered within the cell. Our choice of a safe Biosafety Level I E. coli bacteria and the relatively non-toxic Tb3+ metal represents a model system for luminescent investigations of biosorption, for studying bacterial-water interfacial chemistry and for the bioremediation of heavy metals and radionuclides.

  15. Construction of the energy matrix for complex atoms. Part VIII: Hyperfine structure HPC calculations for terbium atom

    Science.gov (United States)

    Elantkowska, Magdalena; Ruczkowski, Jarosław; Sikorski, Andrzej; Dembczyński, Jerzy

    2017-11-01

    A parametric analysis of the hyperfine structure (hfs) for the even parity configurations of atomic terbium (Tb I) is presented in this work. We introduce the complete set of 4fN-core states in our high-performance computing (HPC) calculations. For calculations of the huge hyperfine structure matrix, requiring approximately 5000 hours when run on a single CPU, we propose the methods utilizing a personal computer cluster or, alternatively a cluster of Microsoft Azure virtual machines (VM). These methods give a factor 12 performance boost, enabling the calculations to complete in an acceptable time.

  16. Spectrofluorimetric determination of human serum albumin using terbium-danofloxacin probe.

    Science.gov (United States)

    Ramezani, Amir M; Manzoori, Jamshid L; Amjadi, Mohammad; Jouyban, Abolghasem

    2012-01-01

    A spectrofluorimetric method is proposed for the determination of human serum albumin (HSA) and bovine serum albumin (BSA) using terbium-danofloxacin (Tb(3+)-Dano) as a fluorescent probe. These proteins remarkably enhance the fluorescence intensity of the Tb(3+)-Dano complex at 545 nm, and the enhanced fluorescence intensity of Tb(3+)-Dano is proportional to the concentration of proteins (HSA and BSA). Optimum conditions for the determination of HSA were investigated and found that the maximum response was observed at: pH = 7.8, [Tb(3+)] = 8.5 × 10(-5) mol L(-1), [Dano] = 1.5 × 10(-4) mol L(-1). The calibration graphs for standard solutions of BSA, HSA, and plasma samples of HSA were linear in the range of 0.2 × 10(-6) - 1.3 × 10(-6) mol L(-1), 0.2 × 10(-6) - 1.4 × 10(-6) mol L(-1), and 0.2 × 10(-6) - 1 × 10(-6) mol L(-1), respectively. The detection limits (S/N = 3) for BSA, HSA, and plasma sample of HSA were 8.7 × 10(-8) mol L(-1), 6.2 × 10(-8) mol L(-1), and 8.1 × 10(-8) mol L(-1), respectively. The applicability of the method was checked using a number of real biological plasma samples and was compared with the UV spectrometric reference method. The results was showed that the method could be regarded as a simple, practical, and sensitive alternative method for determination of albumin in biological samples.

  17. Spectrofluorimetric Determination of Human Serum Albumin Using Terbium-Danofloxacin Probe

    Directory of Open Access Journals (Sweden)

    Amir M. Ramezani

    2012-01-01

    Full Text Available A spectrofluorimetric method is proposed for the determination of human serum albumin (HSA and bovine serum albumin (BSA using terbium-danofloxacin (Tb3+-Dano as a fluorescent probe. These proteins remarkably enhance the fluorescence intensity of the Tb3+-Dano complex at 545 nm, and the enhanced fluorescence intensity of Tb3+-Dano is proportional to the concentration of proteins (HSA and BSA. Optimum conditions for the determination of HSA were investigated and found that the maximum response was observed at: pH=7.8, [Tb3+] =8.5×10−5 mol L−1, [Dano] =1.5×10−4 mol L−1. The calibration graphs for standard solutions of BSA, HSA, and plasma samples of HSA were linear in the range of 0.2×10−6−1.3×10−6 mol L−1, 0.2×10−6−1.4×10−6 mol L−1, and 0.2×10−6−1×10−6 mol L−1, respectively. The detection limits (S/N = 3 for BSA, HSA, and plasma sample of HSA were 8.7×10−8 mol L−1, 6.2×10−8 mol L−1, and 8.1×10−8 mol L−1, respectively. The applicability of the method was checked using a number of real biological plasma samples and was compared with the UV spectrometric reference method. The results was showed that the method could be regarded as a simple, practical, and sensitive alternative method for determination of albumin in biological samples.

  18. Determination of flavonoids in pharmaceutical preparations using Terbium sensitized fluorescence method

    Directory of Open Access Journals (Sweden)

    M Shaghaghi

    2009-12-01

    Full Text Available "nBackground and the Purpose of the Study: The aim of this study was development and validation of a simple, rapid and sensitive spectrofluorimetric method for determination of total flavonoids in two topical formulations of Calendula officinalis, Ziziphus Spina-christi and an oral drop of Hypiran perforatum L. The proposed method is based on the formation of terbium (Tb3+ "n-flavonoids (quercetin as a reference standard complex at pH 7.0, which has fluorescence intensely with maximum emission at 545 nm when excited at 310 nm. "nMethod "n: For ointments masses of topical formulations were weighed and added to ethanol-aqueous buffer (pH 10.0 and the resulting mixtures were shaken and then two phases were separated by centrifugation. Aqueous phases were filtered and then diluted with water. For Hypiran drops an appropriate portion was diluted with ethanol and then aliquots of sample or standard solutions were determined according to the experimental procedure. "nResults "n: Under the optimum conditions, total concentrations of flavonoids (as quercetin equivalent in three tested formulations were found to be 0.204 mg/g (for Dermatin cream, 0.476 mg/g (for Calendula ointment and 13.50 μg/ml (for Hypiran drops. Analytical recoveries from samples spiked with different amounts of quercetin were 96.1-104.0 % with RSD % of less than 3.5. Conclusion : The proposed method which requires a simple dissolution step without any matrix interferences provided high sensitivity and selectivity and was easily applied to determine total flavonoids in real samples of three investigated formulations with excellent reproducibility.

  19. TOF SIMS analysis and generation of white photoluminescence from strontium silicate codoped with europium and terbium

    Energy Technology Data Exchange (ETDEWEB)

    Tshabalala, Modiehi A.; Swart, Hendrik C.; Ntwaeaborwa, Odireleng M., E-mail: ntwaeab@ufs.ac.za [Department of Physics, University of the Free State, P.O Box 339, Bloemfontein 9300 South Africa (South Africa)

    2014-03-15

    White light emitting terbium (Tb{sup 3+}) and europium (Eu{sup 3+}) codoped strontium silicate (Sr{sub 2}SiO{sub 4}) phosphors were prepared by a solid state reaction process. The structure, particle morphology, chemical composition, ion distribution, photoluminescence (PL), and decay characteristics of the phosphors were analyzed by x-ray diffraction (XRD), scanning electron microscopy (SEM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and PL spectroscopy, respectively. The XRD data showed that our Sr{sub 2}SiO{sub 4} composed of two phases, namely, β-Sr{sub 2}SiO{sub 4} and α′-Sr{sub 2}SiO{sub 4}, and the α′-Sr{sub 2}SiO{sub 4} phase was more prominent than the β-Sr{sub 2}SiO{sub 4} phase. The SEM micrographs showed that the particles were agglomerated together and they did not have definite shapes. All ions (i.e., negative and positive) present in our materials were identified by TOF-SIMS. In addition, the chemical imaging performed with the TOF-SIMS demonstrated how the individual ions including the dopants (Eu{sup 3+} and Tb{sup 3+}) were distributed in the host lattice. White photoluminescence was observed when the Sr{sub 2}SiO{sub 4}:Tb{sup 3+}, Eu{sup 3+} phosphor was excited at 239 nm using a monochromatized xenon lamp as the excitation source. The phosphor exhibited fast decay lifetimes implying that it is not a good candidate for long afterglow applications.

  20. Synthesis, crystal structure and photophysical properties of europium(III) and terbium(III) complexes with pyridine-2,6-dicarboxamide

    NARCIS (Netherlands)

    Tanase, S.; Gallego, P.M.; Gelder, R. de; Fu, W.T.

    2007-01-01

    The reactions of pyridine-2,6-dicarboxamide with europium(III) and terbium(III) triflates led to the formation of mononuclear complexes of formula [Ln(pcam)(3)](CF3SO3)(3) (Ln = Eu 1, Tb 2; pcam stands for pyridine-2,6-dicarboxamide). From single-crystal X-ray diffraction analysis, the complexes

  1. Zinc sulfide and terbium-doped zinc sulfide films grown by traveling wave reactor atomic layer epitaxy

    CERN Document Server

    Yun, S J; Nam, K S

    1998-01-01

    Zinc sulfide (ZnS) and terbium-doped ZnS (ZnS:Tb) thin films were grown by traveling wave reactor atomic layer epitaxy (ALE). In the present work, ZnCl sub 2 , H sub 2 S, and tris (2,2,6,6-tetramethyl-3,5-heptandionato) terbium (Tb(tmhd) sub 3) were used as the precursors. The dependence of crystallinity and Cl content of ZnS films was investigated on the growth temperature. ZnS and ZnS:Tb films grown at temperatures ranging from 400 to 500 .deg. C showed a hexagonal-2H crystalline structure. The crystallinity of ZnS film was greatly enhanced as the temperature increased. At growth temperatures higher than 450.deg.C, the films showed preferred orientation with mainly (002) diffraction peak. The Cl content decreased from approximately 9 to 1 at.% with the increase in growth temperature from 400 to 500 .deg. C. The segregation of Cl near the surface region and the incorporation of O from Tb(tmhd) sub 3 during ALE process were also observed using Auger electron spectroscopy. The ALE-grown ZnS and ZnS:Tb films re...

  2. Commercializing potassium terbium fluoride, KTF (KTb3F10) faraday crystals for high laser power optical isolator applications

    Science.gov (United States)

    Schlichting, Wolfgang; Stevens, Kevin; Foundos, Greg; Payne, Alexis

    2017-10-01

    Many scientific lasers and increasingly industrial laser systems operate in power regime, require high-performance optical isolators to prevent disruptive light feedback into the laser cavity. The optically active Faraday material is the key optical element inside the isolator. SYNOPTICS has been supplying the laser market with Terbium Gallium Garnet (TGG - Tb3Ga5O12) for many years. It is the most commonly used material for the 650-1100nm range and the key advantages for TGG include its cubic crystal structure for alignment free processing, little to no intrinsic birefringence, and ease of manufacture. However, for high-power laser applications TGG is limited by its absorption at 1064nm and its thermo-optic coefficient, dn/dT. Specifically, thermal lensing and depolarization effects become a limiting factor at high laser powers. While TGG absorption has improved significantly over the past few years, there is an intrinsic limit. Now, SYNOPTICS is commercializing the enhanced new crystal Potassium Terbium Fluoride KTF (KTb3F10) that exhibits much smaller nonlinear refractive index and thermo-optic coefficients, and still exhibits a Verdet constant near that of TGG. This cubic crystal has relatively low absorption and thermo-optic coefficients. It is now fully characterized and available for select production orders. At OPTIFAB in October 2017 we present recent results comparing the performance of KTF to TGG in optical isolators and show SYNOPTICS advances in large volume crystal growth and the production ramp up.

  3. Preparation and photoluminescence enhancement in terbium(III ternary complexes with β-diketone and monodentate auxiliary ligands

    Directory of Open Access Journals (Sweden)

    Devender Singh

    2016-12-01

    Full Text Available A series of new solid ternary complexes of terbium(III ion based on β-diketone ligand acetylacetone (acac and monodentate auxiliary ligands (aqua/urea/triphenylphosphineoxide/pyridine-N-oxide had been prepared. The structural characterizations of synthesized ternary compounds were studied by means of elemental analysis, infrared (IR, and proton nuclear magnetic resonance (NMR spectral techniques. The optical characteristics were investigated with absorption as well as photoluminescence spectroscopy. Thermal behavior of compounds was examined by TGA/DTA analysis and all metal complexes were found to have good thermal stability. The luminescence decay time of complexes were also calculated by monitoring at emission wavelength corresponding to 5D4 → 7F5 transition. A comparative inspection of the luminescent behavior of prepared ternary compounds was performed in order to determine the function of auxiliary ligands in the enhancement of luminescence intensity produced by central terbium(III ion. The color coordinates values suggested that compounds showed bright green emission in visible region in electromagnetic spectrum. Complexes producing green light could play a significant role in the fabrication of efficient light conversion molecular devices for display purposes and lightning systems.

  4. Synthesis and luminescent study of Ce{sup 3+}-doped terbium-yttrium aluminum garnet

    Energy Technology Data Exchange (ETDEWEB)

    Dotsenko, V.P., E-mail: ssclab@ukr.net [A.V. Bogatsky Physico-Chemical Institute, National Academy of Sciences of Ukraine, Lustdorfskaya doroga 86, 65080 Odessa (Ukraine); Berezovskaya, I.V.; Zubar, E.V.; Efryushina, N.P. [A.V. Bogatsky Physico-Chemical Institute, National Academy of Sciences of Ukraine, Lustdorfskaya doroga 86, 65080 Odessa (Ukraine); Poletaev, N.I.; Doroshenko, Yu.A. [Institute of Combustion and Advanced Technologies, Mechnikov Odessa National University, Dvoryanskaya 2, 65082 Odessa (Ukraine); Stryganyuk, G.B. [Ivan Franko National University of Lviv, Kirilo i Mefodii 8, 79005 Lviv (Ukraine); HASYLAB at DESY, Notkestrasse 85, 22607 Hamburg (Germany); Voloshinovskii, A.S. [Ivan Franko National University of Lviv, Kirilo i Mefodii 8, 79005 Lviv (Ukraine)

    2013-02-15

    Highlights: Black-Right-Pointing-Pointer Ce{sup 3+}-doped garnets (TYAG) were prepared using nanostructured reagents. Black-Right-Pointing-Pointer The Ce{sup 3+} ions cause a very efficient yellow emission of the samples. Black-Right-Pointing-Pointer The reasons for the long wavelength position of this emission are discussed. Black-Right-Pointing-Pointer Contribution from Al atoms to the conduction band of TYAG is quite essential. - Abstract: Terbium-yttrium aluminum garnets (TYAG) doped with Ce{sup 3+} ions have been prepared by solid state reactions between nanostructured oxides of aluminum and rare earths. The luminescent properties of Ce{sup 3+} ions in (Tb{sub 0.8}Y{sub 0.2}){sub 3(1-x)}Ce{sub 3x}Al{sub 5}O{sub 12} (x = 0.03) have been studied upon excitation in the 2-20 eV region. The substitution of Tb{sup 3+} for Y{sup 3+} in the garnet structure results in broadening the emission band and shifting its maximum towards the longer wavelengths. It was found that in addition to the 4f{sup n} {yields} 4f{sup n-1}5d excitation bands of Ce{sup 3+} and Tb{sup 3+} ions, the excitation spectra for the Ce{sup 3+} emission contain broad bands at 6.73 and {approx}9.5 eV. These bands are attributed to the Ce{sup 3+}-bound exciton formation and O 2p {yields} Al 3s, 3p transitions, respectively. In contrast to the predictions based on the results of electronic structure calculations on Y{sub 3}Al{sub 5}O{sub 12} and Tb{sub 4}Al{sub 2}O{sub 9}, the threshold of interband transitions in TYAG is at high energies ( Greater-Than-Or-Slanted-Equal-To 7.3 eV), and contributions from Al{sub tetr} and Al{sub oct} atoms to the conduction-band density of states are evaluated as quite essential.

  5. Structural variations in terbium(III) complexes with 1,3-adamantanedicarboxylate and diverse co-ligands

    Energy Technology Data Exchange (ETDEWEB)

    Thuéry, Pierre, E-mail: pierre.thuery@cea.fr

    2015-07-15

    Terbium nitrate was reacted with 1,3-adamantanedicarboxylic acid (LH{sub 2}) under solvo-hydrothermal conditions with either N,N-dimethylformamide (DMF) or N,N-dimethylacetamide (DMA) as organic solvents. Hydrolysation of the latter co-solvents resulted in the formation of formate or acetate ions, which are present as co-ligands in the 1D coordination polymer [Tb(L)(HCOO)(H{sub 2}O){sub 2}] (1) and the 2D assembly [Tb(L)(CH{sub 3}COO)(H{sub 2}O)] (2). The increase in dimensionality in the latter arises from the higher connectivity provided by acetate versus formate, the L{sup 2−} ligand being bis-chelating in both cases. The complex [Tb{sub 2}(L){sub 3}(H{sub 2}O){sub 5}][Tb{sub 2}(L){sub 3}(H{sub 2}O){sub 4}]·3H{sub 2}O (3), another 1D species, crystallizes alongside crystals of 2. Further addition of cucurbit[6]uril (CB6), with DMF as co-solvent, gave the two complexes [Tb{sub 2}(L){sub 2}(CB6)(H{sub 2}O){sub 6}](NO{sub 3}){sub 2}·6H{sub 2}O (4) and [H{sub 2}NMe{sub 2}]{sub 2}[Tb(L)(HCOO){sub 2}]{sub 2}·CB6·3H{sub 2}O (5). Complex 4 crystallizes as a 3D framework in which Tb(L){sup +} chains are connected by tetradentate CB6 molecules, while 5 unites a carboxylate-bridged anionic 2D planar assembly and layers of CB6 molecules with counter-cations held at both portals. - Graphical abstract: One- to three-dimensional assemblies are formed in terbium(III) complexes with 1,3-adamantanedicarboxylate obtained under solvo-hydrothermal conditions, these species including formate or acetate co-ligands formed in situ, or additional cucurbit[6]uril molecules. - Highlights: • We report structures of terbium(III) complexes with 1,3-adamantanedicarboxylate. • Solvents able to generate co-ligands or counter-ions in situ have been used. • A 3D species including additional cucurbituril molecules is decribed. • One species displays an alternation of metal–organic and organic sheets.

  6. Complete Stokes polarimetry of magneto-optical Faraday effect in a terbium gallium garnet crystal at cryogenic temperatures.

    Science.gov (United States)

    Majeed, Hassaan; Shaheen, Amrozia; Anwar, Muhammad Sabieh

    2013-10-21

    We report the complete determination of the polarization changes caused in linearly polarized incident light due to propagation in a magneto-optically active terbium gallium garnet (TGG) single crystal, at temperatures ranging from 6.3 to 300 K. A 28-fold increase in the Verdet constant of the TGG crystal is seen as its temperature decreases to 6.3 K. In contrast with polarimetry of light emerging from a Faraday material at room temperature, polarimetry at cryogenic temperatures cannot be carried out using the conventional fixed polarizer-analyzer technique because the assumption that ellipticity is negligible becomes increasingly invalid as temperature is lowered. It is shown that complete determination of light polarization in such a case requires the determination of its Stokes parameters, otherwise inaccurate measurements will result with negative implications for practical devices.

  7. Development of Optical Isolators for Visible Light Using Terbium Aluminum Garnet (Tb3Al5O12) Single Crystals

    Science.gov (United States)

    Geho, Mikio; Takagi, Takashi; Chiku, Shinichiro; Fujii, Takashi

    2005-07-01

    We have recently reported the successful growth of incongruently melting terbium aluminum garnet (Tb3Al5O12; TAG) single crystals by the hybrid laser FZ (floating zone) method. Optical property evaluations confirmed a high transmittance and a larger Verdet constant than conventional Tb3Ga5O12 (TGG) crystals and/or Faraday glasses. In this study, we attempted to design, fabricate, and evaluate optical isolators in visible light through near-infrared (NIR) regions using TAG crystals. A finite element method (FEM) simulation of possible models led us to the preferable one based on a radially magnetized magnet. To realize this, we employed a pseudo-radially magnetized magnet. The target wavelengths of the prototype device were 408, 808, and 1064 nm. The typical extinction ratio was more than 30 dB and the insertion loss was less than 0.3 dB for AR-coated devices.

  8. A hydrometallurgical process for the recovery of terbium from fluorescent lamps: Experimental design, optimization of acid leaching process and process analysis.

    Science.gov (United States)

    Innocenzi, Valentina; Ippolito, Nicolò Maria; De Michelis, Ida; Medici, Franco; Vegliò, Francesco

    2016-12-15

    Terbium and rare earths recovery from fluorescent powders of exhausted lamps by acid leaching with hydrochloric acid was the objective of this study. In order to investigate the factors affecting leaching a series of experiments was performed in according to a full factorial plan with four variables and two levels (4 2 ). The factors studied were temperature, concentration of acid, pulp density and leaching time. Experimental conditions of terbium dissolution were optimized by statistical analysis. The results showed that temperature and pulp density were significant with a positive and negative effect, respectively. The empirical mathematical model deducted by experimental data demonstrated that terbium content was completely dissolved under the following conditions: 90 °C, 2 M hydrochloric acid and 5% of pulp density; while when the pulp density was 15% an extraction of 83% could be obtained at 90 °C and 5 M hydrochloric acid. Finally a flow sheet for the recovery of rare earth elements was proposed. The process was tested and simulated by commercial software for the chemical processes. The mass balance of the process was calculated: from 1 ton of initial powder it was possible to obtain around 160 kg of a concentrate of rare earths having a purity of 99%. The main rare earths elements in the final product was yttrium oxide (86.43%) following by cerium oxide (4.11%), lanthanum oxide (3.18%), europium oxide (3.08%) and terbium oxide (2.20%). The estimated total recovery of the rare earths elements was around 70% for yttrium and europium and 80% for the other rare earths. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Investigation of the luminescent properties of terbium-anthranilate complexes and application to the determination of anthranilic acid derivatives in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Arnaud, N.; Georges, J

    2003-01-10

    The luminescent properties of terbium complexes with furosemide (FR), flufenamic (FF) acid, tolfenamic (TF) acid and mefenamic (MF) acid have been investigated in aqueous solutions. For all four compounds, complexation occurs when the carboxylic acid of the aminobenzoic group is dissociated and is greatly favoured in the presence of trioctylphosphine oxide as co-ligand and Triton X-100 as surfactant. Under optimum conditions, luminescence of the lanthanide ion is efficiently sensitised and the lifetime of the {sup 5}D{sub 4} resonance level of terbium in the complex is ranging between 1 and 1.9 ms, against 0.4 ms for the aqua ion. The sensitivity of the method for the determination of anthranilic acid derivatives is improved by one to two orders of magnitude with respect to that achieved using native fluorescence or terbium-sensitised luminescence in methanol. The limits of detection are 2x10{sup -10}, 5x10{sup -10} and 2x10{sup -9} mol l{sup -1} for flufenamic acid, furosemide and tolfenamic acid, and mefenamic acid, respectively, with within-run RSD values of less than 1%. The method has been applied to the determination of flufenamic acid in spiked calf sera with and without sample pretreatment. Depending on the method and the analyte concentration, the recovery was ranging between 83 and 113% and the lowest concentration attainable in serum samples was close to 1x10{sup -7} mol l{sup -1}.

  10. Structural investigation and photoluminescent properties of gadolinium(III), europium(III) and terbium(III) 3-mercaptopropionate complexes.

    Science.gov (United States)

    Souza, E R; Mazali, I O; Sigoli, F A

    2014-01-01

    This work reports on the synthesis, crystallographic determination and spectroscopic characterization of gadolinium(III), terbium(III) and europium(III) 3-mercaptopropionate complexes, aqua-tris(3-mercaptopropionate)lanthanide(III)--[Ln(mpa)3(H2O)]. The Judd-Ofelt intensity parameters were experimentally determined from emission spectrum of the [Eu(mpa)3(H2O)]complex and they were also calculated from crystallographic data. The complexes are coordination polymers, where the units of each complex are linked together by carboxylate groups leading to an unidimensional and parallel chains that by chemical interactions form a tridimensional framework. The emission spectrum profile of the [Eu(mpa)3(H2O)] complex is discussed based on point symmetry of the europium(III) ion, that explains the bands splitting observed in its emission spectrum. Photoluminescent analysis of the [Gd(mpa)3(H2O)] complex show no efficient ligand excitation but an intense charge transfer band. The excitation spectra of the [Eu(mpa)3(H2O)] and [Tb(mpa)3(H2O)] complexes do not show evidence of energy transfer from the ligand to the excited levels of these trivalent ions. Therefore the emission bands are originated only by direct f-f intraconfigurational excitation of the lantanide(III) ions.

  11. Fluorometric determination of proteins using the terbium (III)-2-thenoyltrifluoroacetone-sodium dodecyl benzene sulfonate-protein system

    Energy Technology Data Exchange (ETDEWEB)

    Jia Zhen [Key Laboratory of Colloid and Interface Chemistry of Education Ministry, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100 (China); Department of Chemistry, Dezhou University, Dezhou 253023 (China); Yang Jinghe [Key Laboratory of Colloid and Interface Chemistry of Education Ministry, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100 (China)]. E-mail: yjh@sdu.edu.cn; Wu Xia [Key Laboratory of Colloid and Interface Chemistry of Education Ministry, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100 (China); Wang Fei [Key Laboratory of Colloid and Interface Chemistry of Education Ministry, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100 (China); Guo Changying [Key Laboratory of Colloid and Interface Chemistry of Education Ministry, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100 (China); Liu Shufang [Key Laboratory of Colloid and Interface Chemistry of Education Ministry, School of Chemistry and Chemical Engineering, Shandong University, Jinan 250100 (China)

    2006-12-15

    It is found that in hexamethylene tetramine (HMTA)-HCl buffer of pH=8.00, proteins can enhance the fluorescence of terbium (III) (Tb{sup 3+})-2-thenoyltrifluoroacetone (TTA)-sodium dodecyl benzene sulfonate (SDBS) system. Based on this, a sensitive method for the determination of proteins is proposed. The experiments indicate that under the optimum conditions, the enhanced fluorescence intensity is in proportion to the concentration of proteins in the range of 4.0x10{sup -9}-7.5x10{sup -6}g/mL for bovine serum albumin (BSA), 5.0x10{sup -9}-1.5x10{sup -5}g/mL for human serum albumin (HSA), 1.0x10{sup -8}-7.5x10{sup -6}g/mL for egg albumin (EA). Their detection limits (S/N=3) are 0.5, 0.8 and 2.0ng/mL, respectively. The interaction mechanism is also studied.

  12. Terbium to Quantum Dot FRET Bioconjugates for Clinical Diagnostics: Influence of Human Plasma on Optical and Assembly Properties

    Directory of Open Access Journals (Sweden)

    Niko Hildebrandt

    2011-10-01

    Full Text Available Förster resonance energy transfer (FRET from luminescent terbium complexes (LTC as donors to semiconductor quantum dots (QDs as acceptors allows extraordinary large FRET efficiencies due to the long Förster distances afforded. Moreover, time-gated detection permits an efficient suppression of autofluorescent background leading to sub-picomolar detection limits even within multiplexed detection formats. These characteristics make FRET-systems with LTC and QDs excellent candidates for clinical diagnostics. So far, such proofs of principle for highly sensitive multiplexed biosensing have only been performed under optimized buffer conditions and interactions between real-life clinical media such as human serum or plasma and LTC-QD-FRET-systems have not yet been taken into account. Here we present an extensive spectroscopic analysis of absorption, excitation and emission spectra along with the luminescence decay times of both the single components as well as the assembled FRET-systems in TRIS-buffer, TRIS-buffer with 2% bovine serum albumin, and fresh human plasma. Moreover, we evaluated homogeneous LTC-QD FRET assays in QD conjugates assembled with either the well-known, specific biotin-streptavidin biological interaction or, alternatively, the metal-affinity coordination of histidine to zinc. In the case of conjugates assembled with biotin-streptavidin no significant interference with the optical and binding properties occurs whereas the histidine-zinc system appears to be affected by human plasma.

  13. Evidence of mass exchange between inside and outside of sonoluminescing bubble in aqueous solution of terbium chloride

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Jinfu, E-mail: liang.shi2007@163.com [School of Physics and Electronic Science, Guizhou Normal University, Guiyang 550001 (China); Chen, Weizhong, E-mail: wzchen@nju.edu.cn [The Key Laboratory of Modern Acoustics, Ministry of Education, Institution of Acoustics, Nanjing University, Nanjing 210093 (China); Wang, Xun; Yang, Jing; Chen, Zhan [The Key Laboratory of Modern Acoustics, Ministry of Education, Institution of Acoustics, Nanjing University, Nanjing 210093 (China)

    2016-12-16

    Highlights: • Time-resolved spectra of SBSL were obtained for Tb{sup 3+} ions emission lines. • Mass exchange between inside and outside of SL bubble was probed via Tb{sup 3+} ions lines. • The argon rectification hypothesis was tested by time-resolved spectra of SBSL. • The rate of mass exchange inside an SBSL bubble increases with increasing sound pressure. - Abstract: Spectra of single-bubble sonoluminescence (SBSL) were obtained for Tb{sup 3+} ions emission lines from bubbles in an aqueous solution of terbium chloride (TbCl{sub 3}). The spectra provide experimental evidence to prove that an air bubble driven by strong ultrasound will not eventually become a rectified pure argon bubble, which is not as predicted by the argon rectification hypothesis. The time-resolved spectra of SBSL show a mass exchange of material such as Tb{sup 3+} ions between the inside and outside of the bubble. With increasing sound pressure, the rate of mass exchange and the SBSL intensity increases.

  14. Optical properties and electrical transport of thin films of terbium(III bis(phthalocyanine on cobalt

    Directory of Open Access Journals (Sweden)

    Peter Robaschik

    2014-11-01

    Full Text Available The optical and electrical properties of terbium(III bis(phthalocyanine (TbPc2 films on cobalt substrates were studied using variable angle spectroscopic ellipsometry (VASE and current sensing atomic force microscopy (cs-AFM. Thin films of TbPc2 with a thickness between 18 nm and 87 nm were prepared by organic molecular beam deposition onto a cobalt layer grown by electron beam evaporation. The molecular orientation of the molecules on the metallic film was estimated from the analysis of the spectroscopic ellipsometry data. A detailed analysis of the AFM topography shows that the TbPc2 films consist of islands which increase in size with the thickness of the organic film. Furthermore, the cs-AFM technique allows local variations of the organic film topography to be correlated with electrical transport properties. Local current mapping as well as local I–V spectroscopy shows that despite the granular structure of the films, the electrical transport is uniform through the organic films on the microscale. The AFM-based electrical measurements allow the local charge carrier mobility of the TbPc2 thin films to be quantified with nanoscale resolution.

  15. Highly luminescent charge-neutral europium(iii) and terbium(iii) complexes with tridentate nitrogen ligands.

    Science.gov (United States)

    Senthil Kumar, Kuppusamy; Schäfer, Bernhard; Lebedkin, Sergei; Karmazin, Lydia; Kappes, Manfred M; Ruben, Mario

    2015-09-21

    We report on the synthesis of tridentate-nitrogen pyrazole-pyridine-tetrazole (L(1)H) and pyrazole-pyridine-triazole (L(2)H) ligands and their complexation with lanthanides (Ln = Gd(iii), Eu(iii) and Tb(iii)) resulting in stable, charge-neutral complexes Ln(L(1))3 and Ln(L(2))3, respectively. X-ray crystallographic analysis of the complexes with L(1) ligands revealed tricapped trigonal coordination geometry around the lanthanide ions. All complexes show bright photoluminescence (PL) in the solid state, indicating efficient sensitization of the lanthanide emission via the triplet states of the ligands. In particular, the terbium complexes show high PL quantum yields of 65 and 59% for L(1) and L(2), respectively. Lower PL efficiencies of the europium complexes (7.5 and 9%, respectively) are attributed to large energy gaps between the triplet states of the ligands and accepting levels of Eu(iii). The triplet state energy can be reduced by introducing an electron withdrawing (EW) group at the 4 position of the pyridine ring. Such substitution of L(1)H with a carboxylic ester (COOMe) EW group leads to a europium complex with increased PL quantum yield of 31%. A comparatively efficient PL of the complexes dissolved in ethanol indicates that the lanthanide ions are shielded against nonradiative deactivation via solvent molecules.

  16. Micelle enhanced and terbium sensitized spectrofluorimetric determination of danofloxacin in milk using molecularly imprinted solid phase extraction

    Science.gov (United States)

    Kaur, Kuldeep; Saini, Shivender Singh; Malik, Ashok Kumar; Singh, Baldev

    2012-10-01

    An efficient molecularly imprinted solid phase extraction (MISPE)-spectrofluorimetric method was developed to sensitively determine danofloxacin (DAN) in milk samples. Solid phase extraction procedure using MISPE cartridges was first performed on milk samples and then spectrofluorimetric determination was done at 546 nm using an excitation wavelength of 285 nm in presence of terbium and sodium dodecyl benzene sulfonate (SDBS). It was found that SDBS significantly enhanced the fluorescence intensity of the DAN-Tb3+ complex. Various factors affecting the fluorescence intensity of DAN-Tb3+-SDBS system were studied and conditions were optimized. The enhanced fluorescence intensity of the system (ΔF) showed a good linear relationship with the concentration of DAN over the range of 8.4 × 10-9-3.4 × 10-7 mol L-1 with a correlation coefficient of 0.9996. The detection limit was determined as 2.0 × 10-9 mol L-1 and the limit of quantification was determined as 6.5 × 10-9 mol L-1. The MISPE-spectrofluorimetric procedure was successfully applied to the determination of DAN in milk samples. The method is simple, rapid, sensitive and allows interference free determination of DAN in complex fluorescent matrices like milk. The method can be used to determine whether the DAN residues in milk exceed MRLs or not.

  17. Study of quantum dot based on tin/yttrium mixed oxide doped with terbium to be used as biomarker

    Energy Technology Data Exchange (ETDEWEB)

    Paganini, Paula P.; Felinto, Maria Claudia F.C.; Kodaira, Claudia A., E-mail: paulapaganini@usp.b, E-mail: mfelinto@ipen.b, E-mail: claudiakodaira@yahoo.co [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Brito, Hermi F., E-mail: hefbrito@iq.usp.b [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Quimica. Lab. de Elementos do Bloco f; Nunes, Luiz Antonio O., E-mail: luizant@ifsc.usp.b [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Fisica. Dept. de Fisica e Informatica

    2009-07-01

    Quantum dots (semiconductors nanocrystals) have brought a promising field to develop a new generation of luminescent biomarkers. The use of lanthanides ions as luminescent markers has many advantages, for example a security method, low cost, high specificity and also the luminescence can be promptly measured with high sensibility and accuracy. These luminescent dots are functionalized with biomolecules. For the luminophore particle to be connect with biologicals molecules (for example covalent antibody) is necessary a previous chemical treatment to modify luminophore particle surface and this process is called functionalization. A prior chemical treatment with changes on the surface luminophore particle is necessary to couple the luminophore to biological molecules. This process can be used as coating which can protect these particles from being dissolved by acid as well as provide functional groups for biological conjugation. This work presents a photoluminescence study of nanoparticles based on tin/yttrium mixed oxides doped with terbium (SnO{sub 2}/Y{sub 2}O{sub 3}:Tb{sup 3+}), synthesized by coprecipitation method. The nanoparticles were submitted to thermal treatment and characterized by X-Ray Powder Diffraction (XRD) that showed cassiterite phase formation and the influence of thermal treatment on nanoparticles structures. These nanoparticles going to be functionalized with a natural polysaccharide (chitosan) in order to form microspheres. These microspheres going to be irradiated with gamma radiation to sterilization and it can be evaluated if the nanoparticles are resistant to irradiation and they do not lose functionality with this process. (author)

  18. Terbium-doped gadolinium oxysulfide (Gd2O2S:Tb) scintillation-based polymer optical fibre sensor for real time monitoring of radiation dose in oncology

    Science.gov (United States)

    Lewis, E.; O'Keeffe, S.; Grattan, M.; Hounsell, A.; McCarthy, D.; Woulfe, P.; Cronin, J.; Mihai, L.; Sporea, D.; Santhanam, A.; Agazaryan, N.

    2014-05-01

    A PMMA based plastic optical fibre sensor for use in real time radiotherapy dosimetry is presented. The optical fibre tip is coated with a scintillation material, terbium-doped gadolinium oxysulfide (Gd2O2S:Tb), which fluoresces when exposed to ionising radiation (X-Ray). The emitted visible light signal penetrates the sensor optical fibre and propagates along the transmitting fibre at the end of which it is remotely monitored using a fluorescence spectrometer. The results demonstrate good repeatability, with a maximum percentage error of 0.5% and the response is independent of dose rate.

  19. Compact all-fiber optical Faraday components using 65-wt%-terbium-doped fiber with a record Verdet constant of -32 rad/(Tm).

    Science.gov (United States)

    Sun, L; Jiang, S; Marciante, J R

    2010-06-07

    A compact all-fiber Faraday isolator and a Faraday mirror are demonstrated. At the core of each of these components is an all-fiber Faraday rotator made of a 4-cm-long, 65-wt%-terbium-doped silicate fiber. The effective Verdet constant of the terbium-doped fiber is measured to be -32 rad/(Tm), which is 27 x larger than that of silica fiber. This effective Verdet constant is the largest value measured to date in any fiber and is 83% of the Verdet constant of commercially available crystal used in bulk optics-based isolators. Combining the all-fiber Faraday rotator with fiber polarizers results in a fully fusion spliced all-fiber isolator whose isolation is measured to be 19 dB. Combining the all-fiber Faraday rotator with a fiber Bragg grating results in an all-fiber Faraday mirror that rotates the polarization state of the reflected light by 88 +/- 4 degrees .

  20. Picomolar Traces of Americium(III) Introduce Drastic Changes in the Structural Chemistry of Terbium(III): A Break in the "Gadolinium Break".

    Science.gov (United States)

    Welch, Jan M; Müller, Danny; Knoll, Christian; Wilkovitsch, Martin; Giester, Gerald; Ofner, Johannes; Lendl, Bernhard; Weinberger, Peter; Steinhauser, Georg

    2017-10-16

    The crystallization of terbium 5,5'-azobis[1H-tetrazol-1-ide] (ZT) in the presence of trace amounts (ca. 50 Bq, ca. 1.6 pmol) of americium results in 1) the accumulation of the americium tracer in the crystalline solid and 2) a material that adopts a different crystal structure to that formed in the absence of americium. Americium-doped [Tb(Am)(H 2 O) 7 ZT] 2 ZT⋅10 H 2 O is isostructural to light lanthanide (Ce-Gd) 5,5'-azobis[1H-tetrazol-1-ide] compounds, rather than to the heavy lanthanide (Tb-Lu) 5,5'-azobis[1H-tetrazol-1-ide] (e.g., [Tb(H 2 O) 8 ] 2 ZT 3 ⋅6 H 2 O) derivatives. Traces of Am seem to force the Tb compound into a structure normally preferred by the lighter lanthanides, despite a 10 8 -fold Tb excess. The americium-doped material was studied by single-crystal X-ray diffraction, vibrational spectroscopy, radiochemical neutron activation analysis, and scanning electron microcopy. In addition, the inclusion properties of terbium 5,5'-azobis[1H-tetrazol-1-ide] towards americium were quantified, and a model for the crystallization process is proposed. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Crystal structures of two mononuclear complexes of terbium(III) nitrate with the tripodal alcohol 1,1,1-tris-(hy-droxy-meth-yl)propane.

    Science.gov (United States)

    Gregório, Thaiane; Giese, Siddhartha O K; Nunes, Giovana G; Soares, Jaísa F; Hughes, David L

    2017-02-01

    Two new mononuclear cationic complexes in which the TbIII ion is bis-chelated by the tripodal alcohol 1,1,1-tris-(hy-droxy-meth-yl)propane (H3LEt, C6H14O3) were prepared from Tb(NO3)3·5H2O and had their crystal and mol-ecular structures solved by single-crystal X-ray diffraction analysis after data collection at 100 K. Both products were isolated in reasonable yields from the same reaction mixture by using different crystallization conditions. The higher-symmetry complex dinitratobis[1,1,1-tris-(hy-droxy-meth-yl)propane]-terbium(III) nitrate di-meth-oxy-ethane hemisolvate, [Tb(NO3)2(H3LEt)2]NO3·0.5C4H10O2, 1, in which the lanthanide ion is 10-coordinate and adopts an s-bicapped square-anti-prismatic coordination geometry, contains two bidentate nitrate ions bound to the metal atom; another nitrate ion functions as a counter-ion and a half-mol-ecule of di-meth-oxy-ethane (completed by a crystallographic twofold rotation axis) is also present. In product aqua-nitratobis[1,1,1-tris-(hy-droxy-meth-yl)propane]-terbium(III) dinitrate, [Tb(NO3)(H3LEt)2(H2O)](NO3)2, 2, one bidentate nitrate ion and one water mol-ecule are bound to the nine-coordinate terbium(III) centre, while two free nitrate ions contribute to charge balance outside the tricapped trigonal-prismatic coordination polyhedron. No free water mol-ecule was found in either of the crystal structures and, only in the case of 1, di-meth-oxy-ethane acts as a crystallizing solvent. In both mol-ecular structures, the two tripodal ligands are bent to one side of the coordination sphere, leaving room for the anionic and water ligands. In complex 2, the methyl group of one of the H3LEt ligands is disordered over two alternative orientations. Strong hydrogen bonds, both intra- and inter-molecular, are found in the crystal structures due to the number of different donor and acceptor groups present.

  2. The response behavior of PPy-DB18C6 electrode to terbium(III in acetonitrile and its thermodynamic application

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Arbab Zavar

    2016-11-01

    Full Text Available Polypyrrole modified electrode prepared by electropolymerization of pyrrole in the presence of a complexing ligand, dibenzo-18-crown-6(DB18C6, was prepared and investigated as a Tb3+-selective electrode in acetonitrile. The potentiometric response of the electrode was linear within the Tb3+ concentration range 1 × 10−5–1 × 10−2 M with a Nernstian slope of 20.9 mVdecade−1 in AN. The electrode was applied to study the complexation of the terbium(III ion in acetonitrile with such other basic aprotic solvent molecules (D as dimethyl sulfoxide, N,N-dimethyl formamide, propylene carbonate and pyridine. The successive complex formation constant (βi and Gibbs energies of transfer (ΔGtr of Tb3+ in AN in relation to such D were obtained.

  3. Luminescence and Magnetic Properties of Two Three-Dimensional Terbium and Dysprosium MOFs Based on Azobenzene-4,4′-Dicarboxylic Linker

    Directory of Open Access Journals (Sweden)

    Belén Fernández

    2016-02-01

    Full Text Available We report the in situ formation of two novel metal-organic frameworks based on terbium and dysprosium ions using azobenzene-4,4′-dicarboxylic acid (H2abd as ligand, synthesized by soft hydrothermal routes. Both materials show isostructural three-dimensional networks with channels along a axis and display intense photoluminescence properties in the solid state at room temperature. Textural properties of the metal-organic frameworks (MOFs have been fully characterized although no appreciable porosity was obtained. Magnetic properties of these materials were studied, highlighting the dysprosium material displays slightly frequency-dependent out of phase signals when measured under zero external field and under an applied field of 1000 Oe.

  4. Luminescent europium and terbium complexes of dipyridoquinoxaline and dipyridophenazine ligands as photosensitizing antennae: structures and biological perspectives.

    Science.gov (United States)

    Dasari, Srikanth; Patra, Ashis K

    2015-12-14

    The europium(III) and terbium(III) complexes, namely [Eu(dpq)(DMF)2(NO3)3] (1), [Eu(dppz)2(NO3)3] (2), [Tb(dpq)(DMF)2Cl3] (3), and [Tb(dppz)(DMF)2Cl3] (4), where dipyrido[3,2-d:2',3'-f]quinoxaline (dpq in 1 and 3), dipyrido[3,2-a:2',3'-c]phenazine (dppz in 2 and 4) and N,N'-dimethylformamide (DMF) have been isolated, characterized from their physicochemical data, luminescence studies and their interaction with DNA, serum albumin protein and photo-induced DNA cleavage activity are studied. The X-ray crystal structures of complexes 1-4 show discrete mononuclear Ln(3+)-based structures. The Eu(3+) in [Eu(dpq)(DMF)2(NO3)3] (1) and [Eu(dppz)2(NO3)3] (2) as [Eu(dppz)2(NO3)3]·dppz (2a) adopts a ten-coordinated bicapped dodecahedron structure with a bidentate N,N-donor dpq ligand, two DMF and three NO3(-) anions in 1 and two bidentate N,N-donor dppz ligands and three NO3(-) anions in 2. Complexes 3 and 4 show a seven-coordinated mono-capped octahedron structure where Tb(3+) contains bidentate dpq/dppz ligands, two DMF and three Cl(-) anions. The complexes are highly luminescent in nature indicating efficient photo-excited energy transfer from the dpq/dppz antenna to Ln(3+) to generate long-lived emissive excited states for characteristic f → f transitions. The time-resolved luminescence spectra of complexes 1-4 show typical narrow emission bands attributed to the (5)D0 → (7)F(J) and (5)D4 → (7)F(J) f-f transitions of Eu(3+) and Tb(3+) ions respectively. The number of inner-sphere water molecules (q) was determined from luminescence lifetime measurements in H2O and D2O confirming ligand-exchange reactions with water in solution. The complexes display significant binding propensity to the CT-DNA giving binding constant values in the range of 1.0 × 10(4)-6.1 × 10(4) M(-1) in the order 2, 4 (dppz) > 1, 3 (dpq). DNA binding data suggest DNA groove binding with the partial intercalation nature of the complexes. All the complexes also show binding propensity (K(BSA)

  5. Spin Waves in Terbium

    DEFF Research Database (Denmark)

    Jensen, J.; Houmann, Jens Christian Gylden

    1975-01-01

    The selection rules for the linear couplings between magnons and phonons propagating in the c direction of a simple basal-plane hcp ferromagnet are determined by general symmetry considerations. The acoustic-optical magnon-phonon interactions observed in the heavy-rare-earth metals have been expl...... by Liu. The coupled magnon—transverse-phonon system for the c direction of Tb is analyzed in detail, and the strengths of the couplings are deduced as a function of wave vector by combining the experimental studies with the theory....

  6. Spin Waves in Terbium

    DEFF Research Database (Denmark)

    Jensen, J.; Houmann, Jens Christian Gylden; Bjerrum Møller, Hans

    1975-01-01

    The energies of spin waves propagating in the c direction of Tb have been studied by inelastic neutron scattering, as a function of a magnetic field applied along the easy and hard directions in the basal plane, and as a function of temperature. From a general spin Hamiltonian, consistent...... with the symmetry, we deduce the dispersion relation for the spin waves in a basal-plane ferromagnet. This phenomenological spin-wave theory accounts for the observed behavior of the magnon energies in Tb. The two q⃗-dependent Bogoliubov components of the magnon energies are derived from the experimental results...

  7. Synthesis and crystal structure of terbium(III) meta-oxoborate Tb(BO{sub 2}){sub 3} ({identical_to} TbB{sub 3}O{sub 6}); Synthese und Kristallstruktur von Terbium(III)-meta-Oxoborat Tb(BO{sub 2}){sub 3} ({identical_to} TbB{sub 3}O{sub 6})

    Energy Technology Data Exchange (ETDEWEB)

    Nikelski, Tanja; Schleid, Thomas [Institut fuer Anorganische Chemie der Universitaet Stuttgart (Germany)

    2003-06-01

    The terbium meta-oxoborate Tb(BO{sub 2}){sub 3} ({identical_to} TbB{sub 3}O{sub 6}) is obtained as single crystals by the reaction of terbium, Tb{sub 4}O{sub 7} and TbCl{sub 3} with an excess of B{sub 2}O{sub 3} in gastight sealed platinum ampoules at 950 C after three weeks. The compound appears to be air- and water-resistant and crystallizes as long, thin, colourless needles which tend to growth-twinning due to their marked fibrous habit. The crystal structure of Tb(BO{sub 2}){sub 3} (orthorhombic, Pnma; a = 1598.97(9), b = 741.39(4), c = 1229.58(7) pm; Z = 16) contains strongly corrugated oxoborate layers {sub {infinity}}{sup 2}{l_brace}(BO{sub 2}){sup -}{r_brace} built of vertex-linked [BO{sub 4}]{sup 5-} tetrahedra (d(B-O) = 143 - 154 pm, and angsph;(O-B-O) = 102-115 ) which spread out parallel (100). The four crystallographically different Tb{sup 3+} cations all exhibit coordination numbers of eight towards the oxygen atoms (d(Tb-O) = 228-287 pm). The corresponding metal cation polyhedra [TbO{sub 8}]{sup 13+} too convene to layers (composition: {sub {infinity}}{sup 2}{l_brace}(Tb{sub 2}O{sub 11}){sup 16-}{r_brace}) which are likewise oriented parallel to the (100) plane. (Abstract Copyright [2003], Wiley Periodicals, Inc.) [German] Das Terbium-meta-Oxoborat Tb(BO{sub 2}){sub 3} ({identical_to} TbB{sub 3}O{sub 6}) entsteht einkristallin bei der Reaktion von Terbium, Tb{sub 4}O{sub 7} und TbCl{sub 3} mit einem Ueberschuss von B{sub 2}O{sub 3} in gasdicht verschlossenen Platinampullen nach drei Wochen bei 950 C. Die Verbindung ist luft- und wasserstabil und faellt in langen, duennen, farblosen Nadeln an, die aufgrund ihres ausgepraegt faserigen Habitus zur Wachstumsverzwillingung neigen. Die Kristallstruktur von Tb(BO{sub 2}){sub 3} (orthorhombisch, Pnma; a = 1598, 97(9), b = 741, 39(4), c = 1229, 58(7) pm; Z = 16) enthaelt parallel (100) verlaufende, stark gewellte Oxoborat-Schichten {sub {infinity}}{sup 2}{l_brace}(BO{sub 2}){sup -}{r_brace} aus

  8. An integrated logic system for time-resolved fluorescent "turn-on" detection of cysteine and histidine base on terbium (III) coordination polymer-copper (II) ensemble.

    Science.gov (United States)

    Xue, Shi-Fan; Lu, Ling-Fei; Wang, Qi-Xian; Zhang, Shengqiang; Zhang, Min; Shi, Guoyue

    2016-09-01

    Cysteine (Cys) and histidine (His) both play indispensable roles in many important biological activities. An enhanced Cys level can result in Alzheimer's and cardiovascular diseases. Likewise, His plays a significant role in the growth and repair of tissues as well as in controlling the transmission of metal elements in biological bases. Therefore, it is meaningful to detect Cys and His simultaneously. In this work, a novel terbium (III) coordination polymer-Cu (II) ensemble (Tb(3+)/GMP-Cu(2+)) was proposed. Guanosine monophosphate (GMP) can self-assemble with Tb(3+) to form a supramolecular Tb(3+) coordination polymer (Tb(3+)/GMP), which can be suited as a time-resolved probe. The fluorescence of Tb(3+)/GMP would be quenched upon the addition of Cu(2+), and then the fluorescence of the as-prepared Tb(3+)/GMP-Cu(2+) ensemble would be restored again in the presence of Cys or His. By incorporating N-Ethylmaleimide and Ni(2+) as masking agents, Tb(3+)/GMP-Cu(2+) was further exploited as an integrated logic system and a specific time-resolved fluorescent "turn-on" assay for simultaneously sensing His and Cys was designed. Meanwhile it can also be used in plasma samples, showing great potential to meet the need of practical application. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Synthesis and photoluminescence properties of cerium-doped terbium-yttrium aluminum garnet phosphor for white light-emitting diodes applications

    Science.gov (United States)

    Wang, Jun; Han, Tao; Lang, Tianchun; Tu, Mingjing; Peng, Lingling

    2015-11-01

    Cerium-doped terbium-yttrium aluminum garnet phosphors were synthesized using the solid-state reaction method. The crystalline phase, morphology, and photoluminescence properties were characterized by x-ray diffraction (XRD), scanning electron microscope (SEM), and fluorescence spectrophotometer, respectively. The XRD results indicate that with an increase of the amount of x (Tb3+), all of the samples have a pure garnet crystal structure without secondary phases. The SEM images reveal that the samples are composed of sphere-like crystallites, which exhibit different degrees of agglomeration. The luminescent properties of Ce ions in )Al5O12∶Ce0.1 have been studied, and it was found that the emission band shifted toward a longer wavelength. The redshift is attributed to the lowering of the 5d energy level centroid of Ce, which can be explained by the nephelauxetic effect and compression effect. These phosphors were coated on blue light-emitting diode (LED) chips to fabricate white light-emitting diodes (WLEDs), and their color-rendering indices, color temperatures, and luminous efficiencies were measured. As a consequence of the addition of Tb, the blue LED pumped )Al5O12∶Ce0.1 phosphors WLEDs showed good optical properties.

  10. Study on the fluorescent enhancement effect in terbium-gadolinium-protein-sodium dodecyl benzene sulfonate system and its application on sensitive detection of protein at nanogram level.

    Science.gov (United States)

    Sun, Changxia; Yang, Jinghe; Wu, Xia; Liu, Shufang; Su, Benyu

    2004-08-01

    The co-luminescence effect in a terbium-gadolinium-protein-sodium dodecyl benzene sulfonate (SDBS) system is reported here. Based on it, the sensitive quantitative analysis of protein at nanogram levels is established. The co-luminescence mechanism is studied using fluorescence, resonance light scattering (RLS), absorption spectroscopy and NMR measurement. It is considered that protein could be unfolded by SDBS, then a efficacious intramolecular fluorescent energy transfer occurs from unfolded protein to rare earth ions through SDBS acting as a "transfer bridge" to enhance the emission fluorescence of Tb3+ in this ternary complex of Tb-SDBS-BSA, where energy transfer from protein to SDBS by aromatic ring stacking is the most important step. Cooperating with the intramolecular energy transfer above is the intermolecular energy transfer between the simultaneous existing complexes of both Tb3+ and Gd3+. The fluorescence quantum yield is increased by an energy-insulating sheath, which is considered to be another reason for the resulting enhancement of the fluorescence. Förster theory is used to calculate the distribution of enhancing factors and has led to a greater understanding of the mechanisms of energy transfer.

  11. [Studies on luminescence properties of seven ternary complexes of terbium with 1,10-phenanthroline and benzoic acid and its derivatives].

    Science.gov (United States)

    Gao, Zhi-hua; Wang, Shu-ping; Liu, Cui-ge; Ma, Rui-xia; Wang, Rui-fen

    2006-04-01

    Seven ternary complexes of Tb(III) were synthesized with benzoic acid (BA), o-, m-, p-methylbenzoic acid (o-MBA, m-MBA, p-MBA), and o-, m-, p-methoxybenzoic acid (o-MOBA, m-MOBA, p-MOBA) as the first ligand, and 1,10-phenanthroline (phen) as the second ligand. The content of C, H and N were measured by using a Flash-EA model 1112 elemental analyzer. Excitation and luminescence spectra of the title solid complexes were recorded by using a Hitachi F-4500 fluorescence spectrophotometer at room temperature. The effects of different varieties and different positions of replacing benzoic acid as the first ligand on fluorescence properties of the ternary complexes of terbium were discussed. The results indicated that the intensity of 5D4-->7F6 (489 nm) and 5D4-->7F5 (545 nm) of substituting benzoic acid complexes was stronger than benzoic acid. Three ternary complexes of Tb(III) with o-, m-, p-methylbenzoic acid showed emission intensity in the consecution: Tb(o-MBA)3 phenMOBA)3phen x H2O>Tb(m-MOBA)3phen x H2O>Tb(p-MOBA)3 phen.

  12. Self-diffusion coefficients of the trivalent f-element ion series in dilute and moderately dilute aqueous solutions: A comparative study between europium, gadolinium, terbium and berkelium

    Science.gov (United States)

    Rafik, Besbes; Noureddine, Ouerfelli; Abderabbou, Abdelmanef; Habib, Latrous

    2010-03-01

    We have continued the studies on the trivalent ions of the 4f and 5f elements. In this paper, we compare the transport properties (self-diffusion coefficient) of the trivalent aquo ions over two ranges of concentrations (0 — 2×10-3M) and (2×10-3 — 1.5M). Self-diffusion coefficients, D, of the trivalent f-element aquo ion series have been determined in aqueous background electrolytes of Gd(NO3)3 and Nd(ClO4)3, at pH=2.5 (HNO3, HClO4) and at 25°C using the open-end capillary method (O.E.C.M.). This method measures the transportation time of ions across a fixed distance. In this paper, we complete a measurement of self-diffusion coefficient for terbium. We optimized the pH to avoid hydrolysis, ion-pairing and complexation of the trivalent 4f and 5f ions. The variation of D versus √C is not linear for dilute solutions (0 — 2×10-3M) and quasi-linear in moderate concentrations (C<=1.5 M). Similar behavior was observed for Tb, as compared with those for Bk, Eu and Gd. We complete the comparison variation of D/D° versus √C for all studied 4f and 5f elements from concentration 0 to 1.5M and we obtained the same variation with √C for all studied elements. All 4f and 5f elements studied follow the Nernst-Hartley expression.

  13. Terbium-based time-gated Förster resonance energy transfer imaging for evaluating protein-protein interactions on cell membranes.

    Science.gov (United States)

    Lindén, Stina; Singh, Manish Kumar; Wegner, K David; Regairaz, Marie; Dautry, François; Treussart, François; Hildebrandt, Niko

    2015-03-21

    Fluorescence imaging of cells and subcellular compartments is an essential tool to investigate biological processes and to evaluate the development and progression of diseases. In particular, protein-protein interactions can be monitored by Förster resonance energy transfer (FRET) between two proximal fluorophores that are attached to specific recognition biomolecules such as antibodies. We investigated the membrane expression of E- and N-cadherins in three different cell lines used as model systems to study epithelial to mesenchymal transition (EMT) and a possible detection of circulating tumour cells (CTCs). EMT is a key process in cancer metastasis, during which epithelial markers (such as E-cadherin) are down-regulated in the primary tumour whereas mesenchymal markers (such as N-cadherin) are up-regulated, leading to enhanced cell motility, intravasation, and appearance of CTCs. Various FRET donor-acceptor pairs and protein recognition strategies were utilized, in which Lumi4-Tb terbium complexes (Tb) and different organic dyes were conjugated to several distinct E- and N-cadherin-specific antibodies. Pulsed excitation of Tb at low repetition rates (100 Hz) and time-gated (TG) imaging of both the Tb-donor and the dye-acceptor photoluminescence (PL) allowed efficient detection of the EMT markers as well as FRET in the case of sufficient donor-acceptor proximity. Efficient FRET was observed only between two E-cadherin-specific antibodies and further experiments indicated that these antibodies recognized the same E-cadherin molecule, suggesting a limited accessibility of cadherins when they are clustered at adherens junctions. The investigated Tb-to-dye FRET systems provided reduced photobleaching compared to the AlexaFluor 488-568 donor-acceptor pair. Our results demonstrate the applicability and advantages of Tb-based TG FRET for efficient and stable imaging of antibody-antibody interactions on different cell lines. They also reveal the limitations of

  14. A broad G protein-coupled receptor internalization assay that combines SNAP-tag labeling, diffusion-enhanced resonance energy transfer, and a highly emissive terbium cryptate acceptor

    Directory of Open Access Journals (Sweden)

    Angélique eLEVOYE

    2015-11-01

    Full Text Available Although G protein-coupled receptor (GPCR internalization has long been considered a major aspect of the desensitization process that tunes ligand responsiveness, internalization is also involved in receptor resensitization and signaling, as well as the ligand scavenging function of some atypical receptors. Internalization thus contributes to the diversity of GPCR-dependent signaling, and its dynamics and quantification in living cells has generated considerable interest. We developed a robust and sensitive assay to follow and quantify ligand-induced and constitutive GPCR internalization but also receptor recycling in living cells. This assay is based on diffusion-enhanced resonance energy transfer (DERET between cell surface GPCRs labeled with a luminescent terbium cryptate donor and a fluorescein acceptor present in the culture medium. GPCR internalization results in a quantifiable reduction of energy transfer. This method yields a high signal-to-noise ratio due to time-resolved measurements. For various GPCRs belonging to different classes, we demonstrated that constitutive and ligand-induced internalization could be monitored as a function of time and ligand concentration, thus allowing accurate quantitative determination of kinetics of receptor internalization but also half-maximal effective or inhibitory concentrations of compounds. In addition to its selectivity and sensitivity, we provided evidence that DERET-based internalization assay is particularly suitable for characterizing biased ligands. Furthermore, the determination of a Z’-factor value of 0.45 indicates the quality and suitability of DERET-based internalization assay for high-throughput screening (HTS of compounds that may modulate GPCRs internalization.

  15. Crystal structure of an eight-coordinate terbium(III ion chelated by N,N′-bis(2-hydroxybenzyl-N,N′-bis(pyridin-2-ylmethylethylenediamine (bbpen2− and nitrate

    Directory of Open Access Journals (Sweden)

    Thaiane Gregório

    2015-01-01

    Full Text Available The reaction of terbium(III nitrate pentahydrate in acetonitrile with N,N′-bis(2-hydroxybenzyl-N,N′-bis(pyridin-2-ylmethylethylenediamine (H2bbpen, previously deprotonated with triethylamine, produced the mononuclear compound [N,N′-bis(2-oxidobenzyl-κO-N,N′-bis(pyridin-2-ylmethyl-κNethylenediamine-κ2N,N′](nitrato-κ2O,O′terbium(III, [Tb(C28H28N4O2(NO3]. The molecule lies on a twofold rotation axis and the TbIII ion is eight-coordinate with a slightly distorted dodecahedral coordination geometry. In the symmetry-unique part of the molecule, the pyridine and benzene rings are both essentially planar and form a dihedral angle of 61.42 (7°. In the molecular structure, the N4O4 coordination environment is defined by the hexadentate bbpen ligand and the bidentate nitrate anion. In the crystal, a weak C—H...O hydrogen bond links molecules into a two-dimensional network parallel to (001.

  16. Selective Sensing of Fe(3+) and Al(3+) Ions and Detection of 2,4,6-Trinitrophenol by a Water-Stable Terbium-Based Metal-Organic Framework.

    Science.gov (United States)

    Cao, Li-Hui; Shi, Fang; Zhang, Wen-Min; Zang, Shuang-Quan; Mak, Thomas C W

    2015-10-26

    A water-stable luminescent terbium-based metal-organic framework (MOF), {[Tb(L1 )1.5 (H2 O)]⋅3 H2 O}n (Tb-MOF), with rod-shaped secondary building units (SBUs) and honeycomb-type tubular channels has been synthesized and structurally characterized by single-crystal X-ray diffraction. The high green emission intensity and the microporous nature of the Tb-MOF indicate that it can potentially be used as a luminescent sensor. In this work, we show that Tb-MOF can selectively sense Fe(3+) and Al(3+) ions from mixed metal ions in water through different detection mechanisms. In addition, it also exhibits high sensitivity for 2,4,6-trinitrophenol (TNP) in the presence of other nitro aromatic compounds in aqueous solution by luminescence quenching experiments. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Picomolar traces of americium(III) introduce drastic changes in the structural chemistry of terbium(III). A break in the ''gadolinium break''

    Energy Technology Data Exchange (ETDEWEB)

    Welch, Jan M. [TU Wien, Atominstitut, Vienna (Austria); Mueller, Danny; Knoll, Christian; Wilkovitsch, Martin; Weinberger, Peter [TU Wien, Institute of Applied Synthetic Chemistry, Vienna (Austria); Giester, Gerald [University of Vienna, Institute of Mineralogy and Crystallography, Vienna (Austria); Ofner, Johannes; Lendl, Bernhard [TU Wien, Institute of Chemical Technologies and Analytics, Vienna (Austria); Steinhauser, Georg [Leibniz Universitaet Hannover, Institute of Radioecology and Radiation Protection (Germany)

    2017-10-16

    The crystallization of terbium 5,5{sup '}-azobis[1H-tetrazol-1-ide] (ZT) in the presence of trace amounts (ca. 50 Bq, ca. 1.6 pmol) of americium results in 1) the accumulation of the americium tracer in the crystalline solid and 2) a material that adopts a different crystal structure to that formed in the absence of americium. Americium-doped [Tb(Am)(H{sub 2}O){sub 7}ZT]{sub 2} ZT.10 H{sub 2}O is isostructural to light lanthanide (Ce-Gd) 5,5{sup '}-azobis[1H-tetrazol-1-ide] compounds, rather than to the heavy lanthanide (Tb-Lu) 5,5{sup '}-azobis[1H-tetrazol-1-ide] (e.g., [Tb(H{sub 2}O){sub 8}]{sub 2}ZT{sub 3}.6 H{sub 2}O) derivatives. Traces of Am seem to force the Tb compound into a structure normally preferred by the lighter lanthanides, despite a 10{sup 8}-fold Tb excess. The americium-doped material was studied by single-crystal X-ray diffraction, vibrational spectroscopy, radiochemical neutron activation analysis, and scanning electron microscopy. In addition, the inclusion properties of terbium 5,5{sup '}-azobis[1H-tetrazol-1-ide] towards americium were quantified, and a model for the crystallization process is proposed. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Sodium terbium(III polyphosphate

    Directory of Open Access Journals (Sweden)

    Abdelghani Oudahmane

    2010-04-01

    Full Text Available Single crystals of the title compound, NaTb(PO34, were obtained by solid-state reaction. This compound belongs to type II of long-chain polyphosphates with the general formula AIBIII(PO34. It is isotypic with the NaNd(PO34 and NaEr(PO34 homologues. The crystal structure is built up of infinite crenelated chains of corner-sharing PO4 tetrahedra with a repeating unit of four tetrahedra. These chains, extending parallel to [100], are linked by isolated TbO8 square antiprisms, forming a three-dimensional framework. The Na+ ions are located in channels running along [010] and are surrounded by six oxygen atoms in a distorted octahedral environment within a cut-off distance <2.9 Å.

  19. A europium- and terbium-coated magnetic nanocomposite as sorbent in dispersive solid phase extraction coupled with ultra-high performance liquid chromatography for antibiotic determination in meat samples.

    Science.gov (United States)

    Castillo-García, M L; Aguilar-Caballos, M P; Gómez-Hens, A

    2015-12-18

    A new magnetic dispersive solid-phase extraction approach based on Eu- and Tb-coated magnetic nanocomposites, combined with ultra-high performance liquid chromatography with fluorometric detection, is reported for the extraction and simultaneous determination of veterinary antibiotics. The method is aimed at monitoring of potential residues of three tetracyclines, namely oxytetracycline, tetracycline, chlortetracycline and three acidic quinolones, such as oxolinic acid, nalidixic acid and flumequine, chosen as model analytes, in animal muscle samples. The nanocomposites were obtained by synthesizing magnetic nanoparticles by a co-precipitation method and their coating with terbium and europium ions. The limits of detection obtained using standard solutions were: 1.0, 1.5, 3.8, 0.25, 0.7 and 1.2ngmL(-1), which corresponds to 3.3, 5.0, 12.7, 0.8, 2.3 and 4.0μgkg(-1) for oxytetracycline, tetracycline, chlortetracycline, oxolinic acid, nalidixic acid and flumequine, respectively, in meat samples. The precision values, obtained in the presence of the sample matrix, were in the ranges 0.12-2.0% and 2.6-15.4% for retention times and areas, respectively. The selectivity of the method was checked by assaying different veterinary drugs, finding that most of them did not interfere at the same concentration levels as that of analytes. A recovery study was performed in the presence of chicken and pork muscle samples, which provided values in the range of 61.5-102.6%. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Spectroscopic analysis of lithium terbium tetrafluoride

    DEFF Research Database (Denmark)

    Christensen, H.P.

    1978-01-01

    . The rare-earth site in LiTbF4 possesses S4 symmetry, which allows six crystal-field parameters. ζ and the six Bim were varied to obtain the best agreement with the experimentally observed levels. Keeping F2=434 cm-1 fixed, a fit with a standard deviation of 12 cm-1 was obtained at 10 K with the following...... were calculated by diagonalizing an effective spin-orbit and crystal-field Hamiltonian in an LS basis. H=Σλi(L→·S→)i+ΣαiΣBimOim, where the parameters λi are functions of the spin-orbit parameter ζ and the Slater parameter F2. The Oim and αi are Racah operators and reduced matrix elements, respectively...

  1. Inelastic critical scattering of neutrons from terbium

    DEFF Research Database (Denmark)

    Als-Nielsen, Jens Aage; Dietrich, O.W.; Marshall, W.

    1967-01-01

    We have measured the inelasticity of the critical neutron scattering in Tb above the Néel temperature. The results show that dynamical slowing down of fluctuations does occur at a second order phase transition.......We have measured the inelasticity of the critical neutron scattering in Tb above the Néel temperature. The results show that dynamical slowing down of fluctuations does occur at a second order phase transition....

  2. Inelastic scattering of neutrons by spin waves in terbium

    DEFF Research Database (Denmark)

    Bjerrum Møller, Hans; Houmann, Jens Christian Gylden

    1966-01-01

    Measurements of spin-wave dispersion relations for magnons propagating in symmetry directions in ferromagnetic Tb; it is first experiment to give detailed information on magnetic excitations in heavy rare earths; Tb was chosen for these measurements because it is one of few rare-earth metals whic...... does not have very high thermal-neutron capture cross section, so that inelastic neutron scattering experiments can give satisfactory information on magnon dispersion relations....

  3. Coherent magnetic structures in terbium/holmium superlattices

    DEFF Research Database (Denmark)

    Bryn-Jacobsen, C.; Cowley, R.A.; McMorrow, D.F.

    1997-01-01

    Neutron-scattering techniques have been used to investigate the magnetic properties of three Tb/Ho superlattices grown by molecular-beam epitaxy. It is revealed that for temperatures in the range T = 10 to T-N(Ho)approximate to 130 K, there is a basal-plane ferromagnetic alignment of Tb moments w...

  4. Photoluminescence studies of a Terbium(III) complex as a fluorescent probe for DNA detection

    Energy Technology Data Exchange (ETDEWEB)

    Khorasani-Motlagh, Mozhgan, E-mail: mkhorasani@chem.usb.ac.ir; Noroozifar, Meissam; Niroomand, Sona; Moodi, Asieh

    2013-11-15

    The photoluminescence properties of a Tb(III) complex of the form [Tb(phen){sub 2}Cl{sub 3}·OH{sub 2}] (phen=1,10-phenanthroline) in different solvents are presented. It shows the characteristic luminescence of the corresponding Ln{sup 3+} ion in the visible region. The emission intensity of this complex in coordinating solvent is higher than non-coordinating one. The suggested mechanism for the energy transfer between the ligand and Tb{sup 3+} ion is the intramolecular energy transfer mechanism. The interactions of the Tb(III) complex with fish salmon DNA are studied by fluorescence spectroscopy, circular dichroism study and viscosity measurements. The results of fluorescence titration reveal that DNA strongly quenches the intrinsic fluorescence of the complex through a static quenching procedure. The binding constant (K{sub b}) of the above metal complex at 25 °C is determined by the fluorescence titration method and it is found to be (8.06±0.01)×10{sup 3} M{sup −1}. The thermodynamic parameters (ΔH{sup 0}>0, ΔS{sup 0}>0 and ΔG{sup 0}<0) indicate that the hydrophobic interactions play a major role in DNA–Tb complex association. The results support the claim that the title complex bonds to FS-DNA by a groove mode. -- Highlights: • Photoluminescence of [Tb(phen){sub 2}Cl{sub 3}·OH{sub 2}] in different solvents are studied. • Tb(III) complex shows good binding affinity to FS DNA with K{sub b}=(8.06±0.01)×10{sup 3} M{sup −1}. • Viscosity of DNA almost unchanged by increasing amount of Tb complex. • CD spectrum of DNA has a little change with increasing amount of Tb complex. • Thermodynamic parameters indicate that the binding reaction is entropically driven.

  5. Lanthanides in Nuclear Medicine. The Production of Terbium-149 by Heavy Ion Beams

    CERN Document Server

    Dmitriev, S N; Zaitseva, N G; Maslov, O D; Molokanova, L G; Starodub, G Ya; Shishkin, S V; Shishkina, T V

    2001-01-01

    Among radioactive isotopes of lanthanide series elements, finding the increasing using in nuclear medicine, alpha-emitter {149}Tb (T_{1/2} = 4.118 h; EC 76.2 %; beta^+ 7.1 %; alpha 16.7 %) is considered as a perspective radionuclide for radioimmunotherapy. The aim of the present work is to study experimental conditions of the {149}Tb production in reactions Nd({12}C, xn){149}Dy (4.23 min; beta^+, EC)\\to {149}Tb when the Nd targets have been irradiated by heavy ions of carbon. On the basis of results of formation and decay of {149}Dy\\to{149}Tb evaluation of the {149}Tb activity, is made which can be received under optimum conditions (enriched {142}Nd target, {12}C ions with the energy 120 MeV and up to current 100 mu A, time of irradiating 8-10 hours). Under these conditions {149}Tb can be obtained up to 30 GBq (up to 0.8 Ci).

  6. Poly[[aqua-?3-picolinato-?2-picolinato-dipicolinatopotassium(I)terbium(III)] 2.5-hydrate

    OpenAIRE

    Filipe A. Almeida Paz; João Rocha; Jacek Klinowski; Tito Trindade; Nogueira,Helena I. S.; Soares-Santos, Paula C. R.; Cunha-Silva, Lu?s

    2008-01-01

    In the title compound, [KTb(C6H4NO2)4(H2O)]·2.5H2O, each Tb3+ centre is coordinated by four N and five O atoms from five distinct picolinate ligands in a geometry resembling a highly distorted tricapped trigonal prism. One of the ligands establishes a skew bridge between neighbouring Tb3+ centres, leading to the formation of one-dimensional anionic polymeric chains, {[(C6H4NO2)4Tb]−}n, running along the direction [010]. Each K+ cation is seven-coordinated by six O atoms from one an...

  7. Spin waves in terbium. III. Magnetic anisotropy at zero wave vector

    DEFF Research Database (Denmark)

    Houmann, Jens Christian Gylden; Jensen, J.; Touborg, P.

    1975-01-01

    The energy gap at zero wave vector in the spin-wave dispersion relation of ferromagnetic. Tb has been studied by inelastic neutron scattering. The energy was measured as a function of temperature and applied magnetic field, and the dynamic anisotropy parameters were deduced from the results....... The axial anisotropy is found to depend sensitively on the orientation of the magnetic moments in the basal plane. This behavior is shown to be a convincing indication of considerable two-ion contributions to the magnetic anisotropy at zero wave vector. With the exception of the sixfold basal...... the effects of zero-point deviations from the fully aligned ground state, and we tentatively propose polarization-dependent two-ion couplings as their origin....

  8. Structural and Magnetic Anisotropy in Amorphous Terbium-Iron Thin Films

    Science.gov (United States)

    Hufnagel, Todd Clayton

    1995-01-01

    High density, removable media magnetooptic disk drives have recently begun to make significant gains in the information mass storage market. The media in these disks are amorphous rare-earth/transition-metal (RE-TM) alloys. One vital property of these materials is a large perpendicular magnetic anisotropy; that is, an easy axis of magnetization which is perpendicular to the plane of the film. A variety of theories, sometimes contradictory, have been proposed to account for this surprising presence of an anisotropic property in an amorphous material. Recent research indicates that there is an underlying atomic-scale structural anisotropy which is responsible for the observed magnetic anisotropy. Several different types of structural anisotropy have been proposed to account for the observed magnetic anisotropy, including pair-ordering anisotropy (anisotropic chemical short-range order) and bond orientation anisotropy (an anisotropy in coordination number or distances independent of chemical ordering). We have studied the structural origins of perpendicular magnetic anisotropy in amorphous Tb-Fe thin films by employing high-energy and anomalous dispersion x-ray scattering. The as-deposited films show a clear structural anisotropy, with a preference for Tb-Fe near neighbors to align in the out-of-plane direction. These films also have a large perpendicular magnetic anisotropy. Upon annealing, the magnetic anisotropy energy drops significantly, and we see a corresponding reduction in the structural anisotropy. The radial distribution functions indicate that the number of Tb-Fe near-neighbors increases in the in-plane direction, but does not change in the out-of-plane direction. Therefore, the distribution of Tb-Fe near-neighbors becomes more uniform upon annealing. We propose that the observed reduction in perpendicular magnetic anisotropy energy is a result of this change in structure. Our results support the pair -ordering anisotropy model of the structural anisotropy in amorphous Tb-Fe thin films. We see no evidence to support the bond orientation anisotropy model.

  9. Luminescence properties of terbium-doped Li3PO4 phosphor for ...

    Indian Academy of Sciences (India)

    Antonov-Romanovskii et al [2] firstly suggested applications of OSL for personal dosime- try. This technique got momentum for personnel dosime- try after the development of α-Al2O3:C. OSL properties of α-Al2O3:C have been investigated for personnel dosimetry, environmental dosimetry, medical dosimetry and space.

  10. Luminescence properties of terbium-doped Li3PO4 phosphor for ...

    Indian Academy of Sciences (India)

    The powder X-ray diffraction (PXRD), photoluminescence (PL) emission and excitation spectra, thermoluminescence (TL) and optically stimulated luminescence (OSL) were measured. The particle size was calculated using the Debye Scherrer formula and found to be 79.42 nm. PL emission spectra of Li 3 PO 4 :Tb 3 + ...

  11. Charge-transfer-based terbium MOF nanoparticles as fluorescent pH sensor for extreme acidity.

    Science.gov (United States)

    Qi, Zewan; Chen, Yang

    2017-01-15

    Newly emerged metal organic frameworks (MOFs) have aroused the great interest in designing functional materials by means of its flexible structure and component. In this study, we used lanthanide Tb 3+ ions and small molecular ligands to design and assemble a kind of pH-sensitive MOF nanoparticle based on intramolecular-charge-transfer effect. This kind of made-to-order MOF nanoparticle for H + is highly specific and sensitive and could be used to fluorescently indicate pH value of strong acidic solution via preset mechanism through luminescence of Tb 3+ . The long luminescence lifetime of Tb 3+ allows eliminating concomitant non-specific fluorescence by time-revised fluorescence techniques, processing an advantage in sensing H + in biological media with strong autofluorescence. Our method showed a great potential of MOF structures in designing and constructing sensitive sensing materials for specific analytes directly via the assembly of functional ions/ligands. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Assessment of terbium (III) as a luminescent probe for the detection of tuberculosis biomarkers

    Energy Technology Data Exchange (ETDEWEB)

    Bamogo, W. [CNRS, IRAMIS, UMR 3685 NIMBE/LEDNA, F-91191 Gif-sur-Yvette (France); Mugherli, L. [CEA, IRAMIS, UMR 3685 NIMBE/LEDNA, F-91191 Gif-sur-Yvette (France); Banyasz, A. [CNRS, IRAMIS, LIDyL/Laboratoire Francis Perrin, URA 2453, F-91191 Gif-sur-Yvette (France); Novelli-Rousseau, A.; Mallard, F. [BioMérieux SA, F-38000 Grenoble (France); Tran-Thi, T.-H., E-mail: thu-hoa.tran-thi@cea.fr [CNRS, IRAMIS, UMR 3685 NIMBE/LEDNA, F-91191 Gif-sur-Yvette (France)

    2015-10-08

    A detection method for nicotinic acid, a specific metabolite marker of Mycobacterium tuberculosis present in cultures and patients' breath, is studied in complex solutions containing other metabolites and in biological media such as urine, saliva and breath condensate. The method is based on the analysis of the luminescence increase of Tb{sup 3+} complexes in the presence of nicotinic acid due to the energy transfer from the excited ligand to the lanthanide ion. It is shown that other potential markers found in M. tuberculosis culture supernatant, such as methyl phenylacetate, p-methyl anisate, methyl nicotinate and 2-methoxy biphenyl, can interfere with nicotinic acid via a competitive absorption of the excitation photons. A new strategy to circumvent these interferences is proposed with an upstream trapping of volatile markers preceding the detection of nicotinic acid in the liquid phase via the luminescence of Tb{sup 3+} complexes. The cost of the method is evaluated and compared with the Xpert MTB/RIF test endorsed by the World Health Organization. - Highlights: • Nicotinic acid, a specific marker of M. tuberculosis, can be detected via luminescence. • The detection limit with a commercial phosphorimeter is 0.4 µmol·L{sup -1}. • Other metabolites of M. tuberculosis can interfere via absorbed excitation light. • The interference can be removed via trapping of the most volatile metabolites. • A breath analysis procedure's cost is compared with the Xpert TBM/RIF test.

  13. A highly porous luminescent terbium-organic framework for reversible anion sensing

    Energy Technology Data Exchange (ETDEWEB)

    Wong, K.L.; Law, G.L.; Wong, W.T. [Department of Chemistry, The University of Hong Kong, Pokfulam Road, Hong Kong (China); Yang, Y.Y. [School of Chemistry and Chemical Engineering, Sun Yat-Sen University, Guangzhou 510275 (China)

    2006-04-18

    Unique tailored porous frameworks incorporating a lanthanide metal center have been designed to function as chemical detectors. A flexible multidentate ligand, mucic acid, is used to differentiate between several anions, thus creating an organic framework that is ideally suited for applications in gas separation, sensors, and chemical switches. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  14. Synthesis and characterization of wide bandgap semiconductors doped with terbium for electroluminescent devices

    OpenAIRE

    Montañez Huamán, Liz Margarita

    2016-01-01

    En el presente trabajo de investigación se ha estudiado propiedades estequiometrias, estructurales y de emisión de luz de semiconductor de amplio ancho de banda dopados con terbio. La difracción de rayos-X en ángulo rasante confirma el estado amorfo de las películas. Los espectros de absorción infrarroja muestran la formación de óxidos en las películas y la espectroscopia de foto-electrones de rayos-X revela la formación de oxinitruro de aluminio y oxicarburo de silicio. Las pe...

  15. Synthesis and characterization of terbium-doped SrSnO3 pigments

    Czech Academy of Sciences Publication Activity Database

    Dohnalová, Ž.; Gorodylova, N.; Šulcová, P.; Vlček, Milan

    2014-01-01

    Roč. 40, č. 8 (2014), s. 12637-12645 ISSN 0272-8842 Institutional support: RVO:61389013 Keywords : pigments * solid state reaction * perovskites Subject RIV: CA - Inorganic Chemistry Impact factor: 2.605, year: 2014

  16. An optical material for the detection of β-hydroxybutyrate based on a terbium complex

    Science.gov (United States)

    Wang, Xiaomiao; Chen, Huili; Li, Hua

    2014-02-01

    A novel Tb3+ complex (Tb(C14H10O4)ṡCl, TbL2) based on benzoic acid (L+H) was successfully synthesized, and gave a weak green emission in methanol-water (V:V, 4:1, pH 4.49). With the addition of β-hydroxybutyrate (β-HB) to a semi-aqueous solution of TbL2, an increment of the luminescent intensity at 545 nm assigned to 5D4 → 7F5 transition of Tb3+ was measured, which was evident to the naked eye. The response showed high selectivity for β-HB compared with other common anions including Cl-, NO3-, CO32-, PO43-, HPO42-, HPO4-, CO42-, PO74-, SO42-, lactate, AcO-, citrate, malate therefore it has the potential to be applied as a luminescent sensor for β-HB.

  17. pH dependent photophysical studies of new europium and terbium complexes of tripodal ligand: Experimental and semiempirical approach

    Energy Technology Data Exchange (ETDEWEB)

    Akbar, Rifat [Department of Chemistry, Sant Longowal Institute of Engineering & Technology, Longowal, Punjab 148106 (India); Baral, Minati [Department of Chemistry, National Institute of Technology Kurukshetra, Haryana 136119 (India); Kanungo, B K, E-mail: b.kanungo@gmail.com [Department of Chemistry, Sant Longowal Institute of Engineering & Technology, Longowal, Punjab 148106 (India)

    2015-11-15

    The photophysical properties of adduct of a novel nonadentate tripodal ligand, 5,5′-(2-(((8-hydroxyquinolin-5-yl)methylamino)methyl)-2-methylpropane-1, 3-diyl)bis(azanediyl)bis(methylene diquinolin-8-ol, (TAME5OX), with Eu{sup 3+} and Tb{sup 3+} metal ions have been probed for photonics applications. The absorption spectroscopy of these complexes show remarkable spectral changes due to characteristic lanthanide transitions, which support the use of TAME5OX as a sensitive optical pH based sensor to detect Ln{sup 3+} metal ions in biological systems. In addition, these complexes have also been shown to exhibit strong green fluorescence allowing simultaneous sensing within the visible region under physiological pH in competitive medium for both Eu{sup 3+} and Tb{sup 3+} ions. The intense fluorescence from these compounds were revealed to intermittently get quenched under acidic as well as basic conditions due to the photoinduced intramolecular electron transfer from excited 8-hydroxyquinoline (8-HQ) moiety to metal ion, just an opposite process. This renders these compounds the OFF–ON–OFF type of pH-dependent fluorescent sensor. The thermodynamic stability and aqueous coordination chemistry of the chelator with the said lanthanide ions have also been probed by potentiometric, UV–visible and fluorescence spectrophotometric method. TAME5OX has been found to form two protonated complexes [Ln(H{sub 5}L)]{sup 5+} and [Ln(H{sub 4}L)]{sup 4+} below pH 2.5 with both metal ions, which consecutively deprotonates through one proton process with rise of pH. The formation constants (log β{sub 11n}) of neutral complexes have been determined to be 33.51 and 32.16 with pLn (pLn=−log[Ln{sup 3+}]) values of 16.14 and 19.48 for Eu{sup 3+} and Tb{sup 3+} ions, respectively, calculated at pH 7.4, indicating TAME5OX is a good lanthanide synthetic chelator. The emission lifetimes of the Eu{sup 3+} and Tb{sup 3+} complexes recorded in D{sub 2}O and H{sub 2}O suggest the presence of water molecules in the first coordination sphere of the metal ions. NMR titrations were carried out to determine the stoichiometry of chelates. The complexe's coordination geometries were optimized by using PM7 as sparkle/PM7 model. The theoretical electronic behavior was evaluated to support the experimental findings, based on ZINDO/S methodology at configuration interaction with single excitations (CIS) level. These results emphasize the capability of the use of the theoretical models in prediction of geometries and all other calculations of compounds containing lanthanide ions and create new interesting possibilities for the design in-silico of novel and highly efficient lanthanide–organic edifice. - Highlights: • Photophysical behavior of Eu{sup 3+} and Tb{sup 3+} complexes of TAME5OX has been investigated. • This tripodal ligand forms thermodynamically stable Ln{sup 3+} complexes. • These compounds exhibit strong green fluorescence under physiological pH. • Green fluorescence gets quenched under acidic and basic conditions, due to PET process. • This renders these compounds the OFF–ON–OFF type of pH-dependent fluorescent sensors.

  18. Visible photoluminescence in polycrystalline terbium doped aluminum nitride (Tb:AlN) ceramics with high thermal conductivity

    Science.gov (United States)

    Wieg, A. T.; Kodera, Y.; Wang, Z.; Imai, T.; Dames, C.; Garay, J. E.

    2012-09-01

    Thermal management continues to be one of the major challenges in the development of high powered light sources such as solid state lasers. In particular, the relatively low thermal conductivity of standard photoluminescent (PL) materials limits the overall power output and/or duty cycle. We present a method based on current activated pressure assisted densification for the fabrication of high thermal conductivity PL materials: rare earth doped polycrystalline bulk aluminum nitride. Specifically, the ceramics are translucent and are doped with Tb3+, allowing for emission in the visible. Remarkably, the ceramics have a room temperature thermal conductivity of 94 W/(m K) which is almost seven times higher than that of the state of the art host material, Nd-doped yttrium aluminum garnet. These light emitting properties coupled with very high thermal conductivity should enable the development of a wide variety of more powerful light sources.

  19. Preparation of extractive resins for producing terbium-161; Preparacion de resinas extractivas para produccion de terbio-161

    Energy Technology Data Exchange (ETDEWEB)

    De la Cruz B, C. C.; Monroy G, F. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)], e-mail: fabiola.monroy@inin.gob.mx

    2009-10-15

    This paper presents the development of a methodology for extractive resins preparation to base of HDEHP, which allows to separation of Tb from Gd generating an own technology of preparation of these resins. The study included the extractive resins preparation from 6 different supports: kieselguhr Dg, alumina, red volcanic rock, chiluca, quarry and fluorite; two treatment types of of supports and varied concentrations of HDEHP extractant (di(2-etil hexyl) orthophosphoric acid), in order to determine which resin has improved efficiency of Gd and Tb separation, and radionuclide purity of {sup 161}Tb. Resins were prepared to base of kieselguhr to determine the most appropriate silicon deposition process. Two silicon deposition treatments were realized: treatment I , by contact with silicon deposition solution (dimethyldichlorosilane / heptane 1:30) and treatment II by contact with vapors of dimethyldichlorosilane in vacuum. The extractant retention was carried out to different concentrations of HDEHP / acetone: 1:4, 1:8, 1:15, 1:20, 1:30 and 1:40. According to the results, there is not direct relation of HDEHP concentration used in extractive resins preparation to base of kieselguhr over the efficiency of Gd and Tb separation and of radionuclide purity of {sup 161}Tb. The effect of support in the efficiency of Gd and Tb separation was studied to prepare resins with the supports kieselguhr, alumina, quarry, chiluca, volcanic rock and fluorite, using the silicon deposition treatment II for the supports and a concentration of HDEHP / acetone 1:20, for extractant retention. Only resins based on kieselguhr could separate to Gd from Tb quantitatively, the resin at a concentration of HDEHP / Acetone 1:20 was the best results obtained in Gd and Tb separation, achieving a separation efficiency greater than 90% and a radionuclide purity higher than 99%. (Author)

  20. Synthesis and Characterization of Europium(III) and Terbium(III) Complexes: An Advanced Undergraduate Inorganic Chemistry Experiment

    Science.gov (United States)

    Swavey, Shawn

    2010-01-01

    Undergraduate laboratories rarely involve lanthanide coordination chemistry. This is unfortunate in light of the ease with which many of these complexes are made and the interesting and instructive photophysical properties they entail. The forbidden nature of the 4f transitions associated with the lanthanides is overcome by incorporation of…

  1. Sensitized green emission of terbium with dibenzoylmethane and 1, 10 phenanthroline in polyvinyl alcohol and polyvinyl pyrrolidone blends

    Science.gov (United States)

    Kumar, Brijesh; Kaur, Gagandeep; Rai, S. B.

    2017-12-01

    Tb doped polyvinyl alcohol: polyvinyl pyrrolidone blends with dibenzoylmethane (DBM) and 1, 10 Phenanthroline (Phen) have been prepared by solution cast technique. Bond formation amongst the ligands and Tb3 + ions in the doped polymer has been confirmed employing Fourier Transform Infrared (FTIR) techniques. Optical properties of the Tb3 + ions have been investigated using UV-Vis absorption, excitation and fluorescence studies excited by different radiations. Addition of dimethylbenzoate and 1, 10 Phenanthroline to the polymer blend increases the luminescence from Tb3 + ions along with energy transfer from the polymer blend itself. Luminescence decay curve analysis affirms the non-radiative energy transfer from DBM and Phen to Tb3 + ions, which is identified as the reason behind this enhancement. The fluorescence decay time of PVA-PVP host decreases from 6.02 ns to 2.31 ns showing an evidence of energy transfer from the host blend to the complexed Tb ions. Similarly the lifetime of DBM and Phen and both in the blend reduces in the complexed system showing the feasibility of energy transfer from these excited DBM and Phen to Tb3 + and is proposed as the cause of the above observations. These entire phenomena have been explained by the energy level diagram.

  2. A Terbium Metal-Organic Framework for Highly Selective and Sensitive Luminescence Sensing of Hg2+Ions in Aqueous Solution.

    Science.gov (United States)

    Xia, Tifeng; Song, Tao; Zhang, Gege; Cui, Yuanjing; Yang, Yu; Wang, Zhiyu; Qian, Guodong

    2016-12-19

    A series of isomorphic lanthanide metal-organic frameworks (MOFs) Ln(TATAB)⋅(DMF) 4 (H 2 O)(MeOH) 0.5 (LnTATAB, Ln=Eu, Tb, Sm, Dy, Gd; H 3 TATAB=4,4',4''-s-triazine-1,3,5-triyltri-p-aminobenzoic acid) have been solvothermally synthesized and structurally characterized. Among these MOFs, TbTATAB exhibits good water stability and a high fluorescence quantum yield. Because mercury ions (Hg 2+ ) have a high affinity to nitrogen atoms, and the space between multiple nitrogen atoms from triazine and imino groups is suitable for interacting with Hg 2+ ions, TbTATAB shows highly selective and sensitive detection of Hg 2+ in aqueous solution with a detection limit of 4.4 nm. Furthermore, it was successfully applied to detect Hg 2+ ions in natural water samples. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Anti-L1CAM radioimmunotherapy is more effective with the radiolanthanide terbium-161 compared to lutetium-177 in an ovarian cancer model

    Energy Technology Data Exchange (ETDEWEB)

    Gruenberg, Juergen; Lindenblatt, Dennis; Cohrs, Susan; Fischer, Eliane [Paul Scherrer Institute, Center for Radiopharmaceutical Sciences ETH-PSI-USZ, Villigen (Switzerland); Dorrer, Holger [Paul Scherrer Institute, Laboratory of Radiochemistry and Environmental Chemistry, Villigen (Switzerland); Zhernosekov, Konstantin [ITG Isotope Technologies Garching GmbH, Garching (Germany); Koester, Ulli [Institut Laue-Langevin, Grenoble (France); Tuerler, Andreas [Paul Scherrer Institute, Laboratory of Radiochemistry and Environmental Chemistry, Villigen (Switzerland); University of Bern, Department of Chemistry and Biochemistry, Berne (Switzerland); Schibli, Roger [Paul Scherrer Institute, Center for Radiopharmaceutical Sciences ETH-PSI-USZ, Villigen (Switzerland); ETH Zurich, Department of Chemistry and Applied Biosciences, Zurich (Switzerland)

    2014-10-15

    The L1 cell adhesion molecule (L1CAM) is considered a valuable target for therapeutic intervention in different types of cancer. Recent studies have shown that anti-L1CAM radioimmunotherapy (RIT) with {sup 67}Cu- and {sup 177}Lu-labelled internalising monoclonal antibody (mAb) chCE7 was effective in the treatment of human ovarian cancer xenografts. In this study, we directly compared the therapeutic efficacy of anti-L1CAM RIT against human ovarian cancer under equitoxic conditions with the radiolanthanide {sup 177}Lu and the potential alternative {sup 161}Tb in an ovarian cancer therapy model. Tb was produced by neutron bombardment of enriched {sup 160}Gd targets. {sup 161}Tb and {sup 177}Lu were used for radiolabelling of DOTA-conjugated antibodies. The in vivo behaviour of the radioimmunoconjugates (RICs) was assessed in IGROV1 tumour-bearing nude mice using biodistribution experiments and SPECT/CT imaging. After ascertaining the maximal tolerated doses (MTD) the therapeutic impact of 50 % MTD of {sup 177}Lu- and {sup 161}Tb-DOTA-chCE7 was evaluated in groups of ten mice by monitoring the tumour size of subcutaneous IGROV1 tumours. The average number of DOTA ligands per antibody was 2.5 and maximum specific activities of 600 MBq/mg were achieved under identical radiolabelling conditions. RICs were stable in human plasma for at least 48 h. {sup 177}Lu- and {sup 161}Tb-DOTA-chCE7 showed high tumour uptake (37.8-39.0 %IA/g, 144 h p.i.) with low levels in off-target organs. SPECT/CT images confirmed the biodistribution data. {sup 161}Tb-labelled chCE7 revealed a higher radiotoxicity in nude mice (MTD: 10 MBq) than the {sup 177}Lu-labelled counterpart (MTD: 12 MBq). In a comparative therapy study with equitoxic doses, tumour growth inhibition was better by 82.6 % for the {sup 161}Tb-DOTA-chCE7 than the {sup 177}Lu-DOTA-chCE7 RIT. Our study is the first to show that anti-L1CAM {sup 161}Tb RIT is more effective compared to {sup 177}Lu RIT in ovarian cancer xenografts. These results suggest that {sup 161}Tb is a promising candidate for future clinical applications in combination with internalising antibodies. (orig.)

  4. CCDC 954774: Experimental Crystal Structure Determination : Dimethylammonium tri-terbium tris(4'-(tetrazol-2-id-5-yl)biphenyl-4-carboxylate) tetrahydroxide trihydrate unknown solvate

    KAUST Repository

    Xue, Dongxu

    2013-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  5. CCDC 959634: Experimental Crystal Structure Determination : octakis(mu~3~-Hydroxo)-undecakis(mu~2~-2-fluorobenzoato)-(N,N-dimethylformamide)-nitrato-hexa-aqua-hexa-terbium

    KAUST Repository

    Guillerm, Vincent

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  6. CCDC 954773: Experimental Crystal Structure Determination : Dimethylammonium tri-terbium tris(4-(tetrazol-2-id-5-yl)benzoate) tetrahydroxide trihydrate unknown solvate

    KAUST Repository

    Xue, Dongxu

    2013-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  7. CCDC 954775: Experimental Crystal Structure Determination : Dimethylammonium tri-terbium tris(2-fluoro-4-(1H-tetrazol-5-yl)benzoate) tetrahydroxide tetradecahydrate

    KAUST Repository

    Xue, Dongxu

    2013-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  8. CCDC 1411423: Experimental Crystal Structure Determination : catena-[dimethylammonium hexakis(mu-fumarato)-octakis(mu-hydroxo)-hexa-terbium N,N-dimethylformamide solvate hexahydrate

    KAUST Repository

    Assen, Ayalew H.

    2016-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  9. CCDC 1410946: Experimental Crystal Structure Determination : catena-[dimethylammonium tris(mu-naphthalene-1,4-dicarboxylato)-tetrakis(mu-hydroxo)-triaqua-tri-terbium(iii) unknown solvate

    KAUST Repository

    Xue, Dongxu

    2015-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  10. Phthalimides: Supramolecular Interactions in Crystals, Hypersensitive Solution 1H-NMR Dynamics and Energy Transfer to Europium(III and Terbium(III States

    Directory of Open Access Journals (Sweden)

    David J. Williams

    2003-07-01

    Full Text Available Detailed crystal structures and 1H-NMR characteristics of some alkylaminephthalimides, including dendritic polyphthalimides, are reported. These investigations were undertaken in order to obtain a better understanding of the relationship between solid-state supramolecular interactions, their persistence in solution and associated dynamics of magnetically hypersensitive phthalimide aromatic AA'BB'-AA'XX' proton NMR resonances. Some alkylamine phthalimides feature folded molecular geometries, which we attribute to n-π interactions among proximal amine-phthalimide sites; those alkylamine-phthalimides that have no possibility for such interactions feature fully extended phthalimide functionalities. Accordingly, alkylamine phthalimide compounds with folded solid-state geometries feature solvent and temperature dependent hypersensitive AA'BB'-AA'XX' 1H-NMR line profiles, which we attribute to the n-π interactions. Luminescence of Eu3+(5D0 and Tb3+(5D4 states show well defined metal ion environments in their complexes with dendritic phthalimides, as well as relatively weak phthalimide-lanthanide(III interactions.

  11. Analysis of tryptophan at nmoll(-1) level based on the fluorescence enhancement of terbium-gadolinium-tryptophan-sodium dodecyl benzene sulfonate system.

    Science.gov (United States)

    Liu, Shufang; Yang, Jinghe; Wu, Xia; Su, Benyu; Sun, Changxia; Wang, Feng

    2004-10-08

    It is found that Tb(3+) can react with tryptophan (Trp) and sodium dodecyl benzene sulfonate (SDBS), and emits the intrinsic fluoresence of Tb(3+). The fluorescence intensity can be enhanced by La(3+), Gd(3+), Lu(3+), Sc(3+) and Y(3+), among which Gd(3+) has the greatest enhancement. This is a new co-luminescence system. The studies indicate that in the Tb-Gd-Trp-SDBS system, there is both Tb-Trp-SDBS and Gd-Trp-SDBS complexes, and they aggregate together and form a large congeries. The fluorescence enhancement of the Tb-Gd-Trp-SDBS system is considered to originate from intramolecular and intermolecular energy transfers, and the energy-insulating sheath effect of Gd-Trp-SDBS complex. Under the optimum conditions, the enhanced intensity of fluorescence is in proportion to the concentration of Trp in the range from 4x10(-8) to 4x10(-5)moll(-1). The detection limit is 10(-9)moll(-1). The proposed method is one of the most sensitive fluoremetries of Trp.

  12. Preparation, characterization, and properties of PMMA-doped polymer film materials: a study on the effect of terbium ions on luminescence and lifetime enhancement.

    Science.gov (United States)

    Zhang, Hui-Jie; Fan, Rui-Qing; Wang, Xin-Ming; Wang, Ping; Wang, Yu-Lei; Yang, Yu-Lin

    2015-02-14

    Poly(methylmethacrylate) (PMMA) doped with Tb-based imidazole derivative coordination polymer {[Tb(3)(L)(μ(3)-OH)(7)]·H(2)O}(n) (1) (L = N,N'-bis(acetoxy)biimidazole) was synthesized and its photophysical properties were studied. The L'(L' = N,N'-bis(ethylacetate)biimidazole) ligand was synthesized by an N-alkylation reaction process followed by ester hydrolysis to produce ligand L. Polymer 1 and ligand L' have been characterized by (1)H NMR and IR spectroscopy, elemental analysis, PXRD and X-ray single-crystal diffraction. Coordination polymer 1 is the first observation of a CdCl(2) structure constructed with hydroxy groups and decorated by ligand L in lanthanide N-heterocyclic coordination polymers. In the 2D layered structure of 1, each Tb3 metal center is connected with three Tb1 and three Tb2 metal centers by seven hydroxyl groups in different directions, resulting in a six-membered ring. After doping, not only the luminescence intensity and lifetime enhanced, but also their thermal stability was increased in comparison with 1. When 1 was doped into poly(methylmethacrylate) (1@PMMA), polymer film materials were formed with the PMMA polymer matrix (w/w = 2.5%-12.5%) acting as a co-sensitizer for Tb(3+) ions. The luminescence intensity of the Tb(3+) emission at 544 nm increases when the content of Tb(3+) was 10%. The lifetime of 1@PMMA (914.88 μs) is more than four times longer than that of 1 (196.24 μs). All τ values for the doped polymer systems are higher than coordination polymer 1, indicating that radiative processes are operative in all the doped polymer films. This is because PMMA coupling with the O-H oscillators from {[Tb(3)(L)(μ(3)-OH)(7)]·H(2)O}(n) can suppress multiphonon relaxation. According to the variable-temperature luminescence (VT-luminescence) investigation, 1@PMMA was confirmed to be a stable green luminescent polymer film material.

  13. Changing Single-Molecule Magnet Properties of a Windmill-Like Distorted Terbium(III) α-Butoxy-Substituted Phthalocyaninato Double-Decker Complex by Protonation/Deprotonation.

    Science.gov (United States)

    Horii, Yoji; Horie, Yusuke; Katoh, Keiichi; Breedlove, Brian K; Yamashita, Masahiro

    2018-01-16

    Synthesis, structures, and magnetic properties of α-butoxy-substituted phthalocyaninato double-decker complexes Tb(α-obPc)2 (1-) (α-obPc: dianion of 1,4,8,11,15,18,22,25-octa(n-butoxy)phthalocyaninato) with protonated (1H), deprotonated (1[HDBU]), and diprotonated forms (1H2+) are discussed. X-ray analysis was used to confirm the position of the proton in 1H, and it was revealed that the protonation induced asymmetric distortion in 1H. In contrast, 1[HDBU] was distorted in a highly symmetric windmill-like fashion. 1H is arranged in a slipped column array in the crystal packing, whereas 1[HDBU] is arranged in a one-dimensional fashion, in which the magnetic easy axes of 1[HDBU] lie along the same line. From direct-current (dc) magnetic measurements, ferromagnetic Tb-Tb interactions occur in both 1H and 1[HDBU], and magnetic hysteresis was observed. However, the area of the magnetic hysteresis in 1[HDBU] is larger than that in 1H, meaning that magnetic relaxation time (τ) is longer in 1[HDBU]. In addition, the results of alternating-current magnetic measurements in a zero dc magnetic field indicate that τ of 1[HDBU] is longer as compared to 1H. In other words, protonation/deprotonation affects not only the molecular structures and crystal packing but also the single-molecule magnet properties.

  14. A Water-Stable Dual-Channel Luminescence Sensor for UO22+Ions Based on an Anionic Terbium(III) Metal-Organic Framework.

    Science.gov (United States)

    Ye, Junwei; Bogale, Raji F; Shi, Yangwei; Chen, Yanzhen; Liu, Xigang; Zhang, Siqi; Yang, Yaoyao; Zhao, Jianzhang; Ning, Guiling

    2017-06-07

    A stable 3D Tb III -based metal-organic framework [Tb(BPDC) 2 ]⋅(CH 3 ) 2 NH 2 (DUT-101) was synthesized, and it is the first efficient dual-channel luminescence sensor for aqueous UO 2 2+ ions. DUT-101 contains an anionic three-dimensional framework and protonated dimethylamine molecules embedded within the channels. The intense green emission of DUT-101 could be highly selectively and sensitively quenched by UO 2 2+ ions even in the presence of other competing metal ions. A possible sensing mechanism was proposed based on both suppression of luminescence resonance energy transfer and enhancement of intermolecular electron transfer. Furthermore, visual green fluorescent test papers based on DUT-101 were fabricated and could be used to discriminate UO 2 2+ ions among various metal ions. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. [?-N,N?-Bis(3-meth?oxy-2-oxidobenzyl?idene)propane-1,3-diamine]trinitratocopper(II)terbium(III) acetone solvate

    OpenAIRE

    Zhang Fang; Liu Fei

    2008-01-01

    In the title complex, [CuTb(C19H20N2O4)(NO3)3]·CH3COCH3, the CuII atom is four-coordinated by two O atoms and two N atoms from the deprotonated Schiff base in a square-planar geometry, while the TbIII atom is ten-coordinated by four O atoms from the deprotonated Schiff base and six O atoms from three bidentate nitrate anions. The compound is isostructural with the previously reported GdIII analogue [Elmali & Elerman (2004). Z. Naturforsch. Teil B, 59, 535–540], which was described ...

  16. Crystal structure of a mixed-ligand terbium(III coordination polymer containing oxalate and formate ligands, having a three-dimensional fcu topology

    Directory of Open Access Journals (Sweden)

    Chainok Kittipong

    2016-01-01

    Full Text Available The title compound, poly[(μ3-formato(μ4-oxalatoterbium(III], [Tb(CHO2(C2O4]n, is a three-dimensional coordination polymer, and is isotypic with the LaIII, CeIII and SmIII analogues. The asymmetric unit contains one TbIII ion, one formate anion (CHO2− and half of an oxalate anion (C2O42−, the latter being completed by application of inversion symmetry. The TbIII ion is nine-coordinated in a distorted tricapped trigonal–prismatic manner by two chelating carboxylate groups from two C2O42− ligands, two carboxylate oxygen atoms from another two C2O42− ligands and three oxygen atoms from three CHO2− ligands, with the Tb—O bond lengths and the O—Tb—O bond angles ranging from 2.4165 (19 to 2.478 (3 Å and 64.53 (6 to 144.49 (4°, respectively. The CHO2− and C2O42− anions adopt μ3-bridging and μ4-chelating-bridging coordination modes, respectively, linking adjacent TbIII ions into a three-dimensional 12-connected fcu topology with point symbol (324.436.56. The title compound exhibits thermal stability up to 623 K, and also displays strong green photoluminescence in the solid state at room temperature.

  17. CCDC 1410822: Experimental Crystal Structure Determination : heptakis(dimethylammonium) dodecakis(mu-hydroxo)-bis(mu-oxo)-nonaaqua-nona-terbium tris(octakis(mu-hydroxo)-triaqua-bis(2-fluorobenzoato)-bis(formato)-hexa-terbium) dodecakis(5-[(4-carboxylatophenyl)methoxy]benzene-1,3-dicarboxylate) unknown solvate

    KAUST Repository

    Alezi, Dalal

    2015-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  18. BASIC RESEARCH ON THE SEPARATION OF SCANDIUM YTTRIUM, AND THE RARE EARTHS BY SOLVENT EXTRACTION.

    Science.gov (United States)

    RARE EARTH ELEMENTS, * SOLVENT EXTRACTION ), (*CHELATE COMPOUNDS, RARE EARTH ELEMENTS), PURIFICATION, ATOMIC SPECTROSCOPY, SCANDIUM, YTTRIUM, PRASEODYMIUM, SAMARIUM, EUROPIUM, GADOLINIUM, TERBIUM, FLUORINE COMPOUNDS, KETONES

  19. A validated spectrofluorimetric method for the determination of citalopram in bulk and pharmaceutical preparations based on the measurement of the silver nanoparticles-enhanced fluorescence of citalopram/terbium complexes.

    Science.gov (United States)

    Khan, Muhammad Naeem; Shah, Jasmin; Jan, Muhammad Rasul; Lee, Sang Hak

    2013-01-01

    A simple, sensitive, and accurate spectrofluorimetric method was developed for the determination of citalopram in bulk and pharmaceutical preparations. The method is based on the enhancement of the weak fluorescence signal (FL) of the Tb (III)-citalopram system in the presence of silver nanoparticles. Fluorescence intensities were measured at 555 nm after excitation at 281 nm. Prepared silver nanoparticles (AgNPs) were characterized by UV-Visible spectra and transmission electron microscopy (TEM). Various factors affecting the formation of citalopram-Tb (III)-AgNPs complexes were studied and optimized. The fluorescence intensity versus concentration plot was linear over the range 0.02-14 μg mL(-1), with an excellent correlation coefficient of 0.9978. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 7.15 × 10(-6) μg mL(-1) and 2.38 × 10(-5) μg mL(-1) respectively. The proposed method was found to have good reproducibility with a relative standard deviation of 3.66% (n = 6). The interference effects of common excipients found in pharmaceutical preparations were studied. The developed method was validated statistically by performing recoveries studies and successfully applied for the assay of citalopram in bulk powder and pharmaceutical preparations. Percent recoveries were found to range from 98.98% to 100.97% for bulk powder and from 96.57% to 101.77% for pharmaceutical preparations.

  20. A "plug-and-play" approach to the preparation of transparent luminescent hybrid materials based on poly(methyl methacrylate), a calix[4]arene cross-linking agent, and terbium ions.

    Science.gov (United States)

    Driscoll, Christopher R; Reid, Brodie L; McIldowie, Matthew J; Muzzioli, Sara; Nealon, Gareth L; Skelton, Brian W; Stagni, Stefano; Brown, David H; Massi, Massimiliano; Ogden, Mark I

    2011-04-07

    A novel methodology to prepare transparent luminescent hybrid materials is reported. Using a calixarene ionophore as a PMMA cross-linker avoids problems, such as phase segregation, and produces a polymer monolith that can be loaded with the metal ion required for luminescence post-synthesis. This approach is versatile and will simplify the production of such materials.

  1. CCDC 954772: Experimental Crystal Structure Determination : catena-(Dimethylammonium tris(mu~4~-3-fluorobiphenyl-4,4'-dicarboxylato)-tetrakis(mu~3~-hydroxo)-triaqua-tri-terbium unknown solvate)

    KAUST Repository

    Xue, Dongxu

    2013-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  2. CCDC 1410820: Experimental Crystal Structure Determination : heptakis(dimethylammonium) heptacosa-terbium dodecakis((1,1'-biphenyl)-3,4',5-tricarboxylate) hexakis(2-fluorobenzoate) hexakis(formate) hexatriacontakis(hydroxide) bis(oxide) unknown solvate hydrate

    KAUST Repository

    Alezi, Dalal

    2015-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  3. Terbium doped SnO2 nanoparticles as white emitters and SnO2:5Tb/Fe3O4 magnetic luminescent nanohybrids for hyperthermia application and biocompatibility with HeLa cancer cells.

    Science.gov (United States)

    Singh, Laishram Priyobarta; Singh, Ningthoujam Premananda; Srivastava, Sri Krishna

    2015-04-14

    SnO2:5Tb (SnO2 doped with 5 at% Tb(3+)) nanoparticles were synthesised by a polyol method and their luminescence properties at different annealing temperatures were studied. Characterization of nanomaterials was done by X-ray diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and vibrating sample magnetometry (VSM). XRD studies indicate that the prepared nanoparticles were of tetragonal structures. Upon Tb(3+) ion incorporation into SnO2, Sn(4+) changes to Sn(2+) and, on annealing again at higher temperature, Sn(2+) changes to Sn(4+). The prepared nanoparticles were spherical in shape. Sn-O vibrations were found from the FTIR studies. In photoluminescence studies, the intensity of the emission peaks of Tb(3+) ions increases with the increase of annealing temperature, and emission spectra lie in the region of white emission in the CIE diagram. CCT calculations show that the SnO2:5Tb emission lies in cold white emission. Quantum yields up to 38% can be obtained for 900 °C annealed samples. SnO2:5Tb nanoparticles were well incorporated into the PVA polymer and such a material incorporated into the polymer can be used for display devices. The SnO2:5Tb/Fe3O4 nanohybrid was prepared and investigated for hyperthermia applications at different concentrations of the nanohybrid. This achieves a hyperthermia temperature (42 °C) under an AC magnetic field. The hybrid nanomaterial SnO2:5Tb/Fe3O4 was found to exhibit biocompatibility with HeLa cells (human cervical cancer cells) at concentrations up to 74% for 100 μg L(-1). Also, this nanohybrid shows green emission and thus it will be helpful in tracing magnetic nanoparticles through optical imaging in vivo and in vitro application.

  4. Filmes delgados luminescentes obtidos a partir de hidroxicarbonatos de ítrio ativados por európio ou térbio Luminescent thin films obtained from ytrium hydroxycarbonates activated by terbium or europium

    Directory of Open Access Journals (Sweden)

    Emy Niyama

    2004-04-01

    Full Text Available These films were obtained by dip coating. Parameters like dislocation velocity; number of deposits, suspension concentration, and number of deposits followed or not by heat treatment between each deposit and calcination temperature were evaluated for establishing the best homogeneity. The obtained films were characterized in terms of their morphology, optical quality and photoluminescence by scanning electron microscopy (SEM, UV-vis absorption spectrophotometry and luminescence spectroscopy, respectively. The morphologic and luminescent characteristics showed dip coating as good laboratory technique for development of thin films for optical applications.

  5. Synthesis and characterization of spherical Tb-MCM-41

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Luiza H.O., E-mail: lulenapires@hotmail.co [Universidade Federal do Para, Instituto de Ciencias Exatas e Naturais, Laboratorio de Catalise e Oleoquimica, CP 479, CEP 66075-110, Belem, PA (Brazil); Queiroz, Renan M.; Souza, Ruth P.; Costa, Carlos E.F. da; Zamian, Jose R. [Universidade Federal do Para, Instituto de Ciencias Exatas e Naturais, Laboratorio de Catalise e Oleoquimica, CP 479, CEP 66075-110, Belem, PA (Brazil); Weber, Ingrid T. [Universidade Federal de Pernambuco, Centro de Ciencias Exatas e da Natureza, Av. Prof. Luis Barros Freire, s/n, Cidade Universitaria, 50670-901 Recife, PE (Brazil); Filho, Geraldo N. da Rocha [Universidade Federal do Para, Instituto de Ciencias Exatas e Naturais, Laboratorio de Catalise e Oleoquimica, CP 479, CEP 66075-110, Belem, PA (Brazil)

    2010-02-04

    Spherical MCM-41 was synthesized at room temperature and functionalized by means of direct synthesis method. Evidence for the terbium presence in the silica matrix was obtained by means of EDX. Scanning electron microscopy (SEM) micrographs showed that terbium incorporation did not change significantly MCM-41 morphology. The maintenance of the hexagonal structure was confirmed by X-ray diffraction (XRD) pattern analysis. The cell parameter increase and the surface area decrease, observed by N{sub 2} adsorption-desorption technique, were taken as evidence of terbium introduction inside the MCM-41 framework. By FT-IR spectra it was found that the main features of the silica framework were maintained. The presence of a strong absorption band centered at ca. 220 nm in the diffuse reflectance UV-vis spectra could indicate the presence of tetra-coordinated terbium in the silica network of Tb-MCM-41 samples.

  6. Therapeutic use of radioactive isotopes

    CERN Multimedia

    Caroline Duc

    2013-01-01

    In December, researchers from ISOLDE-CERN, the Paul Scherrer Institute (PSI) and the Institut Laue-Langevin (ILL) published the results of an in vivo study which successfully proved the effectiveness of four terbium isotopes for diagnosing and treating cancerous tumours.   Four terbium isotopes suitable for clinical purposes. “ISOLDE is the only installation capable of supplying terbium isotopes of such purity and intensity in the case of three out of the four types used in this study,” explains Karl Johnson, a physicist at ISOLDE.  “Producing over a thousand different isotopes, our equipment offers the widest choice of isotopes in the world!” Initially intended for fundamental physics research, ISOLDE has diversified its activities over time to invest in various projects in the materials science, biochemistry and nuclear medicine fields. The proof-of-concept study has confirmed that the four terbium isotopes 149Tb, 152Tb, 155Tb produ...

  7. Thermal History Using Microparticle Trap Luminescence

    Science.gov (United States)

    2012-06-01

    and thermoluminescence of terbium-activated silicates and aluminates " . Radiat. Meas. 43, 323-326 (2008). HDTRA1-07-1-0016 University of...of terbium-activated silicates and aluminates " . 15th Solid State Dosimetry Conference, Delft, The Netherlands, July 8-13 (2007). 2 INTRODUCTION...increased to 500°C until combustion occurred (- 7 min). The remaining powder was collected, crushed in a agate mortar, and annealed (typically at 900

  8. On the quenching of trivalent terbium luminescence by ligand low lying triplet state energy and the role of the {sup 7}F{sub 5} level: The [Tb(tta){sub 3} (H{sub 2}O){sub 2}] case

    Energy Technology Data Exchange (ETDEWEB)

    Souza, A.S., E-mail: adelmosaturnino@hotmail.com [Departamento de Química Fundamental, Universidade Federal de Pernambuco, 50670-901 Recife, PE (Brazil); Nunes, L.A. [Instituto de Física de São Carlos, Universidade de São Paulo, 13560-970 São Carlos, SP (Brazil); Felinto, M.C.F.C. [Instituto de Pesquisas Energéticas e Nucleares-IPEN, 05505-800 São Paulo, SP (Brazil); Brito, H.F. [Instituto de Química, Universidade de São Paulo, 05508-900 São Paulo, SP (Brazil); Malta, O.L. [Departamento de Química Fundamental, Universidade Federal de Pernambuco, 50670-901 Recife, PE (Brazil)

    2015-11-15

    In this work we discuss the observed Tb{sup 3+} ion luminescence quenching, due to the relative ligand low lying triplet state energy, in the [Tb(tta){sub 3} (H{sub 2}O){sub 2}] compound at low and room temperature (tta=thenoyltrifluoroacetonate). Theoretical energy transfer rates, for both multipolar and exchange mechanisms, were calculated and discussed on the basis of selection rules and energy mismatch conditions from the [Tb(tta){sub 3} (H{sub 2}O){sub 2}] emission spectra. We have concluded that the exchange mechanism by far dominates, in the present case, and that the long first excited state {sup 7}F{sub 5} lifetime (in the millisecond scale) plays a crucial role in the Tb{sup 3+} luminescence quenching. - Highlights: • The energy exchange between the ligand T{sub 1} and Tb{sup 3+5}D{sub 4} levels occur by the exchange interaction. • The Tb{sup 3+} first excited {sup 7}F{sub 5} level plays a crucial role in this process due to its long lifetime. • At room temperature the energy exchanged between the {sup 5}D{sub 4} level of the Tb{sup 3+} ion and the T{sub 1} of the ligand is lost via the intersystem crossing T{sub 1} → S{sub 0} channel.

  9. Synthesis, structure, and magnetic properties of a new family of tetra-nuclear {Mn2(III)Ln2}(Ln = Dy, Gd, Tb, Ho) clusters with an arch-type topology: single-molecule magnetism behavior in the dysprosium and terbium analogues.

    Science.gov (United States)

    Chandrasekhar, Vadapalli; Bag, Prasenjit; Speldrich, Manfred; van Leusen, Jan; Kögerler, Paul

    2013-05-06

    Sequential reaction of Mn(II) and lanthanide(III) salts with a new multidentate ligand, 2,2'-(2-hydroxy-3-methoxy-5-methylbenzylazanediyl)diethanol (LH3), containing two flexible ethanolic arms, one phenolic oxygen, and a methoxy group afforded heterometallic tetranuclear complexes [Mn2Dy2(LH)4(μ-OAc)2](NO3)2·2CH3OH·3H2O (1), [Mn2Gd2(LH)4(μ-OAc)2](NO3)2·2CH3OH·3H2O (2), [Mn2Tb2(LH)4(μ-OAc)2](NO3)2·2H2O·2CH3OH·Et2O (3), and [Mn2Ho2(LH)4(μ-OAc)2]Cl2·5CH3OH (4). All of these dicationic complexes possess an arch-like structural topology containing a central Mn(III)-Ln-Ln-Mn(III) core. The two central lanthanide ions are connected via two phenolate oxygen atoms. The remaining ligand manifold assists in linking the central lanthanide ions with the peripheral Mn(III) ions. Four doubly deprotonated LH(2-) chelating ligands are involved in stabilizing the tetranuclear assembly. A magnetochemical analysis reveals that single-ion effects dominate the observed susceptibility data for all compounds, with comparably weak Ln···Ln and very weak Ln···Mn(III) couplings. The axial, approximately square-antiprismatic coordination environment of the Ln(3+) ions in 1-4 causes pronounced zero-field splitting for Tb(3+), Dy(3+), and Ho(3+). For 1 and 3, the onset of a slowing down of the magnetic relaxation was observed at temperatures below approximately 5 K (1) and 13 K (3) in frequency-dependent alternating current (AC) susceptibility measurements, yielding effective relaxation energy barriers of ΔE = 16.8 cm(-1) (1) and 33.8 cm(-1) (3).

  10. Reactive Chemical Vapor Deposition Method as New Approach for Obtaining Electroluminescent Thin Film Materials

    Directory of Open Access Journals (Sweden)

    Valentina V. Utochnikova

    2012-01-01

    Full Text Available The new reactive chemical vapor deposition (RCVD method has been proposed for thin film deposition of luminescent nonvolatile lanthanide aromatic carboxylates. This method is based on metathesis reaction between the vapors of volatile lanthanide dipivaloylmethanate (Ln(dpm3 and carboxylic acid (HCarb orH2Carb′ and was successfully used in case of HCarb. Advantages of the method were demonstrated on example of terbium benzoate (Tb(bz3 and o-phenoxybenzoate thin films, and Tb(bz3 thin films were successfully examined in the OLED with the following structure glass/ITO/PEDOT:PSS/TPD/Tb(bz3/Ca/Al. Electroluminescence spectra of Tb(bz3 showed only typical luminescent bands, originated from transitions of the terbium ion. Method peculiarities for deposition of compounds of dibasic acids H2Carb′ are established on example of terbium and europium terephtalates and europium 2,6-naphtalenedicarboxylate.

  11. Spatial resolution in X-ray imaging with scintillating glass optical fiber plates

    Science.gov (United States)

    Pavan, P.; Zanella, G.; Zannoni, R.; Marigo, A.

    1993-04-01

    Some scintillating optical fiber plates, fabricated with terbium glasses are tested for their intrinsic spatial resolution under X-ray irradiation and the result is compared with a typical phosphor screen. The spatial resolution (CTF and MTF) is measured as a function of spatial frequency and the standard deviation of the corresponding Gaussian PSF is derived.

  12. PROCESS FOR THE PREPARATION OF ALLOY NANOPARTICLES COMPRISING A NOBLE AND A NON-NOBLE METAL

    DEFF Research Database (Denmark)

    2017-01-01

    The present invention concerns a chemical process for preparing nanoparticles of an alloy comprising both a noble metal, such as platinum, and a non-noble transition or lanthanide metal, such as yttrium, gadolinium or terbium. The process is carried out by reduction with hydrogen and removal...

  13. Multiplet effects in the electronic structure of heavy rare-earth metals

    NARCIS (Netherlands)

    Lebegue, S.; Svane, A.; Katsnelson, M.I.; Lichtenstein, A.I.; Eriksson, O.

    2006-01-01

    The spectroscopic properties of elemental terbium, dysprosium, holmium, and erbium are investigated using first-principles calculations taking into account intra-atomic correlation effects. In order to describe the strongly localized f electrons together with the conduction bands, we have used the

  14. Performance of 20 Ci 137Cs γ-ray Compton spectrometer for the ...

    Indian Academy of Sciences (India)

    The in-house 137Cs spectrometer is very useful for the measurement of momentum densities of heavy materials. The performance of the machine is assessed using aluminum, terbium and mercury samples and the exper- imental data from comparable apparatus. Keywords. Compton scattering; electron momentum density; ...

  15. Author Details

    African Journals Online (AJOL)

    Pengkiliya, P. Vol 67 (2014) - Articles Interaction of 3-Hydroxypicolinamide with TbIII and its Sensitizing Effect on Terbium Luminescence as a Function of pH and Medium Abstract PDF. ISSN: 0379-4350. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about ...

  16. Author Details

    African Journals Online (AJOL)

    Devi, TP. Vol 67 (2014) - Articles Interaction of 3-Hydroxypicolinamide with TbIII and its Sensitizing Effect on Terbium Luminescence as a Function of pH and Medium Abstract PDF. ISSN: 0379-4350. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

  17. THz near-field Faraday imaging in hybrid metamaterials

    NARCIS (Netherlands)

    Kumar, N.; Strikwerda, A.C.; Fan, K.; Zhang, X.; Averitt, R.D.; Planken, P.C.M.; Adam, A.J.L.

    2012-01-01

    We report on direct measurements of the magnetic near-field of metamaterial split ring resonators at terahertz frequencies using a magnetic field sensitive material. Specifically, planar split ring resonators are fabricated on a single magneto-optically active terbium gallium garnet crystal.

  18. Synthesis and photoluminescence properties of CaSixOy:Tb3+ phosphors prepared using solution-combustion method

    CSIR Research Space (South Africa)

    Dejene, FB

    2011-07-01

    Full Text Available to Ca3Si2O7 as the terbium concentration increase. Broad band excitations peaking between 280 - 360 nm derived from excited states of Tb3+ ions were observed for all powders grown from various Tb compositions. The green emission peak at 545 nm due...

  19. Scanning Electron Microscope-Cathodoluminescence Analysis of Rare-Earth Elements in Magnets.

    Science.gov (United States)

    Imashuku, Susumu; Wagatsuma, Kazuaki; Kawai, Jun

    2016-02-01

    Scanning electron microscope-cathodoluminescence (SEM-CL) analysis was performed for neodymium-iron-boron (NdFeB) and samarium-cobalt (Sm-Co) magnets to analyze the rare-earth elements present in the magnets. We examined the advantages of SEM-CL analysis over conventional analytical methods such as SEM-energy-dispersive X-ray (EDX) spectroscopy and SEM-wavelength-dispersive X-ray (WDX) spectroscopy for elemental analysis of rare-earth elements in NdFeB magnets. Luminescence spectra of chloride compounds of elements in the magnets were measured by the SEM-CL method. Chloride compounds were obtained by the dropwise addition of hydrochloric acid on the magnets followed by drying in vacuum. Neodymium, praseodymium, terbium, and dysprosium were separately detected in the NdFeB magnets, and samarium was detected in the Sm-Co magnet by the SEM-CL method. In contrast, it was difficult to distinguish terbium and dysprosium in the NdFeB magnet with a dysprosium concentration of 1.05 wt% by conventional SEM-EDX analysis. Terbium with a concentration of 0.02 wt% in an NdFeB magnet was detected by SEM-CL analysis, but not by conventional SEM-WDX analysis. SEM-CL analysis is advantageous over conventional SEM-EDX and SEM-WDX analyses for detecting trace rare-earth elements in NdFeB magnets, particularly dysprosium and terbium.

  20. Performance of 20 Ci 137Cs γ-ray Compton spectrometer for the ...

    Indian Academy of Sciences (India)

    ... than the conventional 241Am Compton spectrometers. The in-house 137Cs spectrometer is very useful for the measurement of momentum densities of heavy materials. The performance of the machine is assessed using aluminum, terbium and mercury samples and the experimental data from comparable apparatus.

  1. Faraday isolator based on TSAG crystal for high power lasers.

    Science.gov (United States)

    Mironov, E A; Palashov, O V

    2014-09-22

    A Faraday isolator based on a new magneto-optical medium, TSAG (terbium scandium aluminum garnet) crystal, has been constructed and investigated experimentally. The device provides an isolation ratio of more than 30 dB at 500 W laser power. It is shown that this medium can be used in Faraday isolators for kilowatt-level laser powers.

  2. 1. Novel Dopants in Silica Based Fibers. 2. Applications of Embedded Optical Fiber Sensors in Reinforced Concrete Buildings and Structures

    Science.gov (United States)

    1990-05-20

    effects in fibers, and nonlinear phenomena in fibers. We also use NMR, ESR and Raman techniques to study incorporation of novel as well as...neodymium, erbium, holmium or terbium. These products can be vacuum dried at elevated temperature. The acac-compound is less expensive since the hfa

  3. Time-gated FRET nanoassemblies for rapid and sensitive intra- and extracellular fluorescence imaging

    NARCIS (Netherlands)

    Afsari, Hamid Samareh; Cardoso Dos Santos, Marcelina; Lindén, Stina; Chen, Ting; Qiu, Xue; van Bergen En Henegouwen, Paul M P|info:eu-repo/dai/nl/071919481; Jennings, Travis L; Susumu, Kimihiro; Medintz, Igor L; Hildebrandt, Niko; Miller, Lawrence W

    Time-gated Förster resonance energy transfer (FRET) using the unique material combination of long-lifetime terbium complexes (Tb) and semiconductor quantum dots (QDs) provides many advantages for highly sensitive and multiplexed biosensing. Although time-gated detection can efficiently suppress

  4. Bulletin of Materials Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 7. Issue front cover thumbnail. Volume 39, Issue 7. December 2016, pages 1619-1889. pp 1619-1623. Luminescence properties of terbium-doped Li 3 PO 4 phosphor for radiation dosimetry · C B PALAN N S BAJAJ S K OMANWAR · More Details Abstract ...

  5. Interaction of 3-Hydroxypicolinamide with Tb III and its Sensitizing ...

    African Journals Online (AJOL)

    Interaction of 3-Hydroxypicolinamide with Tb III and its Sensitizing Effect on Terbium Luminescence as a Function of pH and Medium. ... The complex formed exists asML2 species in which HPA behaves as anO,O,N,N-chelating ligand. The solid complex is isolated from aqueous medium and characterized employing ...

  6. Lanthanide Enhanced Luminescence (LEL) with One and Two Photon Excitation of Quantum Dyes(copyright) Lanthanide(III)-Macrocycles

    National Research Council Canada - National Science Library

    Leif, Robert C; Becker, Margie C; Bromm Jr., Al; Chen, Nanguang; Cowan, Ann E; Vallarino, Lidia M; Yang, Sean; Zucker, Robert M

    2004-01-01

    .... Preliminary studies indicate that cells stained with the europium Quantum Dye can be observed both by conventional UV laser excitation and by infrared two-photon confocal microscopy. An enhancer has been found that enables the observation of simultaneous emissions from both the europium and terbium Quantum Dyes.

  7. Kinetically inert lanthanide complexes as reporter groups for binding of potassium by 18-crown-6

    DEFF Research Database (Denmark)

    Junker, Anne Kathrine Ravnsborg; Tropiano, Manuel; Faulkner, Stephen

    2016-01-01

    in a copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) “click” reaction with azide-functionalized crown ethers. The resulting complexes were investigated using NMR and optical methods. Titrations with potassium chloride in methanol observing the sensititzed europium- and terbium-centered emissions were...

  8. Luminescent properties of Al{sub 2}O{sub 3}: Tb powders; Propiedades luminiscentes de polvos de Al{sub 2}O{sub 3}: Tb

    Energy Technology Data Exchange (ETDEWEB)

    Esparza G, A.E.; Garcia, M.; Falcony, C.; Azorin N, J. [CICATA-IPN, Legaria 694, Col. Irrigacion, 11500 Mexico D.F. (Mexico)

    2000-07-01

    In this work the photo luminescent and cathode luminescent characteristics of aluminium oxide (Al{sub 2}O{sub 3}) powders impurified with terbium (Tb) were studied for their use in dosimetry. The optical, structural, morphological characteristics of the powders as function of variation in the impurity concentration and the annealing temperature will be presented. As regards the optical properties of powders (photoluminescence and cathode luminescence) it was observed a characteristic emission associated with radiative transitions between electron energy levels of terbium, the spectra associated with this emission consists of several peaks associated with such transitions. In the structural and morphological characterization (X-ray diffraction and scanning electron microscopy) it was appreciated that in accordance the annealing temperature of powders is augmented it is evident the apparition of certain crystalline phases. The results show that this is a promissory material for radiation dosimetry. (Author)

  9. Plastic optical fibre sensor for in-vivo radiation monitoring during brachytherapy

    Science.gov (United States)

    Woulfe, P.; Sullivan, F. J.; Lewis, E.; O'Keeffe, S.

    2015-09-01

    An optical fibre sensor is presented for applications in real-time in-vivo monitoring of the radiation dose a cancer patient receives during seed implantation in Brachytherapy. The sensor is based on radioluminescence whereby radiation sensitive scintillation material is embedded in the core of a 1mm plastic optical fibre. Three scintillation materials are investigated: thallium-doped caesium iodide (CsI:Tl), terbium-doped gadolinium oxysulphide (Gd2O2S:Tb) and europium-doped lanthanum oxysulphide (La2O2S:Eu). Terbium-doped gadolinium oxysulphide was identified as being the most suitable scintillator and further testing demonstrates its measureable response to different activities of Iodine-125, the radio-active source commonly used in Brachytherapy for treating prostate cancer.

  10. [Luminescent cytochemical methods of detecting microorganisms].

    Science.gov (United States)

    Ivanovskaia, N P; Osin, N S; Khramov, E N; Zlobin, V N

    1999-01-01

    The paper shows that the luminescence cytochemical technique can be used for identification of microorganisms and microbiological synthesis products. The method is based on the interaction of specific fluorescence probes (ANS, terbium ions, and beta-diketonate complexes of europium, as well as metal-containing porphyrines) with major microbial intracellular components and toxins. Unlike classical microbiological, immunochemical or biochemical methods of detection, the proposed method has a reasonable versatility, specificity, sensitivity, rapid action, and possible automation.

  11. Radiotherapy dosimetry based on plastic optical fibre sensors

    Science.gov (United States)

    O'Keeffe, S.; Grattan, M.; Hounsell, A.; McCarthy, D.; Woulfe, P.; Cronin, J.; Lewis, E.

    2013-05-01

    The use of a PMMA based plastic optical fibre in radiotherapy dosimetry is presented. The optical fibre tip is coated with a scintillation material, terbium-doped gadolinium oxysulfide (Gd2O2S:Tb), which fluoresces under ionising radiation. The emitted signal penetrates the fibre and propagates along the fibre where it is remotely monitored using a fluorescence spectrometer. The results demonstrate good repeatability, with a maximum percentage error of 0.59% and the response is independent of dose rate.

  12. Luminescent Lanthanide Metal Organic Frameworks for cis-Selective Isoprene Polymerization Catalysis

    OpenAIRE

    Samantha Russell; Thierry Loiseau; Christophe Volkringer; Marc Visseaux

    2015-01-01

    In this study, we are combining two areas of chemistry; solid-state coordination polymers (or Metal-Organic Framework—MOF) and polymerization catalysis. MOF compounds combining two sets of different lanthanide elements (Nd3+, Eu3+/Tb3+) were used for that purpose: the use of neodymium was required due to its well-known catalytic properties in dienes polymerization. A second lanthanide, europium or terbium, was included in the MOF structure with the aim to provide luminescent properties. Sev...

  13. Modeled Neutron Induced Nuclear Reaction Cross Sections for Radiochemsitry in the region of Thulium, Lutetium, and Tantalum I. Results of Built in Spherical Symmetry in a Deformed Region

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, R. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-09-06

    We have developed a set of modeled nuclear reaction cross sections for use in radiochemical diagnostics. Systematics for the input parameters required by the Hauser-Feshbach statistical model were developed and used to calculate neutron induced nuclear reaction cross sections for targets ranging from Terbium (Z = 65) to Rhenium (Z = 75). Of particular interest are the cross sections on Tm, Lu, and Ta including reactions on isomeric targets.

  14. Factors Affecting the Efficiency of Excited-States Interactions of Complexes between Some Visible Light-Emitting Lanthanide Ions and Cyclophanes Containing Spirobiindanol Phosphonates

    Directory of Open Access Journals (Sweden)

    M. S. Attia

    2007-01-01

    Full Text Available The efficiency of excited-states interactions between lanthanide ions Tb3+ and Eu3+ and some new cyclophanes (I, II, and III has been studied in different media. High luminescence quantum yield values for terbium and europium complexes in DMSO and PMMA were obtained. The photophysical properties of the green and red emissive Tb3+ and Eu3+ complexes have been elucidated, respectively.

  15. The effect of core and lanthanide ion dopants in sodium fluoride-based nanocrystals on phagocytic activity of human blood leukocytes

    Science.gov (United States)

    Sojka, Bartlomiej; Liskova, Aurelia; Kuricova, Miroslava; Banski, Mateusz; Misiewicz, Jan; Dusinska, Maria; Horvathova, Mira; Ilavska, Silvia; Szabova, Michaela; Rollerova, Eva; Podhorodecki, Artur; Tulinska, Jana

    2017-02-01

    Sodium fluoride-based β-NaLnF4 nanoparticles (NPs) doped with lanthanide ions are promising materials for application as luminescent markers in bio-imaging. In this work, the effect of NPs doped with yttrium (Y), gadolinium (Gd), europium (Eu), thulium (Tm), ytterbium (Yb) and terbium (Tb) ions on phagocytic activity of monocytes and granulocytes and the respiratory burst was examined. The surface functionalization of leukocytes and respiratory burst of cells was observed for limited number of samples.

  16. The effect of metal distribution on the luminescence properties of mixed-lanthanide metal-organic frameworks.

    Science.gov (United States)

    Cadman, Laura K; Mahon, Mary F; Burrows, Andrew D

    2018-02-13

    A series of lanthanide metal-organic frameworks (MOFs) of the general formula [Ln(Hodip)(H 2 O)]·nH 2 O (Sm, 1; Eu, 2; Gd, 3; Tb, 4; Dy, 5; Er, 6; H 4 odip = 5,5'-oxydiisophthalic acid) have been prepared and shown crystallographically to have isostructural three-dimensional frameworks. The fluorescence emission spectra of the europium compound 2, which is red, and the terbium compound 4, which is green, show characteristic peaks for transitions involving the metal centres, whereas that for the gadolinium compound 3 is dominated by transitions involving Hodip. Using a 1 : 1 : 1 mixture of europium, gadolinium and terbium nitrates in the synthesis resulted in the mixed-metal MOF [Gd 0.17 Tb 0.19 Eu 0.64 (Hodip)(H 2 O)]·nH 2 O 7, for which the ratio of the metal ions was determined using EDX spectroscopy. The fluorescence emission spectrum of 7 is dominated by europium emission bands reflecting the higher proportion of Eu 3+ centres and quenching of the terbium fluorescence by metal-to-metal energy transfer. A series of core-shell MOF materials based on the Ln(Hodip)(H 2 O) framework have been prepared in order to isolate the lanthanides in different domains within the crystals. The emission spectra for materials with Gd@Tb@Eu (8) and Tb@Eu@Gd (9) are dominated by terbium emissions, suggesting that physical separation from europium suppresses quenching. In contrast, the material with Eu@Gd@Tb (10) shows only broad ligand bands and europium emissions. This confirms that core-shell MOFs have different fluorescence properties to simple mixed-metal MOFs, demonstrating that the spatial distribution of the metals within a mixed-lanthanide MOF affects the fluorescence behaviour.

  17. Synthesis and stimulated luminescence property of Zn(BO2)2:Tb(3).

    Science.gov (United States)

    Del Rosario, G Cedillo; Cruz-Zaragoza, E; Hipólito, M García; Marcazzó, J; Hernández A, J M; Murrieta S, H

    2017-09-01

    Zinc borate, Zn(BO2)2, doped with different concentrations of terbium (0.5-8mol%) was synthesized and polycrystalline samples were characterized by Scanning Electron Microscopy and X-Ray Diffraction. The Zn(BO2)2 was formed in the pure samples sintered at 750 and 800°C which has the body centered cubic structure, and a ZnB4O7 primitive orthorhombic phase was present. The thermoluminescent intensity was dependents on the thermal treatment (250-500°C) and also on the impurity concentration. The linear dose-response was obtained between 0.022-27.7Gy and 0.5-50Gy when the samples were exposed to beta and gamma radiation, respectively. The complex structure of the glow curves was analyzed by the Computerized Glow Curve Deconvolution method. The kinetics parameters were calculated assuming the general order kinetics model describing accurately the TL process. The glow curves of Tb(3+)-doped zinc borate phosphor were well deconvolved by six glow peaks. Zinc borate with 8mol% of impurity concentration exhibited an intense radioluminescent emission. The radioluminescent spectra show their maximum bands at 370, 490, 545 and 700nm related to the terbium ion in the zinc borate. These obtained results suggest that the terbium doped zinc borate is a promising phosphor for use in radiation dosimetry because of its high TL sensitivity to the ionizing radiation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Effect of Ising-type Tb3+ ions on the low-temperature magnetism of La, Ca cobaltite.

    Science.gov (United States)

    Knížek, K; Jirák, Z; Hejtmánek, J; Veverka, M; Kaman, O; Maryško, M; Santavá, E; André, G

    2014-03-19

    Crystal and magnetic structures of the x = 0.2 member of the La0.8-xTbxCa0.2CoO3 perovskite series have been determined from powder neutron diffraction. Enhancement of the diffraction peaks due to ferromagnetic or cluster glass ordering is observed below TC = 55 K. The moments first evolve on Co sites, and ordering of Ising-type Tb(3+) moments is induced at lower temperatures by a molecular field due to Co ions. The final magnetic configuration is collinear Fx for the cobalt subsystem, while it is canted FxCy for terbium ions. The rare-earth moments align along local Ising axes within the ab-plane of the orthorhombic Pbnm structure. The behavior in external fields up to 70-90 kOe has been probed by magnetization and heat capacity measurements. The dilute terbium ions contribute to significant coercivity and remanence that both steeply increase with decreasing temperature. A remarkable manifestation of the Tb(3+) Ising character is the observation of a low-temperature region with an anomalously large linear term of heat capacity and its field dependence. Similar behaviors are detected also for other terbium dopings x = 0.1 and 0.3.

  19. Luminescence enhancement by energy transfer in melamine-Y{sub 2}O{sub 3}:Tb{sup 3+} nanohybrids

    Energy Technology Data Exchange (ETDEWEB)

    Stagi, Luigi, E-mail: luigi.stagi@dsf.unica.it; Chiriu, Daniele; Carbonaro, Carlo M.; Ricci, Pier Carlo [Dipartimento di Fisica, Università degli Studi di Cagliari, S.P. Monserrato-Sestu Km 0,700, 09042 Monserrato (Italy); Ardu, Andrea; Cannas, Carla [Departimento di Scienze Chimiche e Geologiche and INSTM, Università d Cagliari, SS 554 bivio Sestu, I-09042 Monserrato (Italy)

    2015-09-28

    The phenomenon of luminescence enhancement was studied in melamine-Y{sub 2}O{sub 3}:Tb hybrids. Terbium doped Y{sub 2}O{sub 3} mesoporous nanowires were synthesized by hydrothermal method. X-ray diffraction patterns and Raman scattering spectra testified the realization of a cubic crystal phase. Organic-inorganic melamine-Y{sub 2}O{sub 3}:Tb{sup 3+} hybrid system was successfully obtained by vapour deposition method. Vibration Raman active modes of the organic counterpart were investigated in order to verify the achievement of hybrid system. Photoluminescence excitation and photoluminescence spectra, preformed in the region between 250 and 350 nm, suggest a strong interaction among melamine and Terbium ions. In particular, a remarkable improvement of {sup 5}D{sub 4}→ F{sub J} Rare Earth emission (at about 542 nm) of about 10{sup 2} fold was observed and attributed to an efficient organic-Tb energy transfer. The energy transfer mechanism was studied by the use of time resolved photoluminescence measurements. The melamine lifetime undergoes to a significant decrease when adsorbed to oxide surfaces and it was connected to a sensitization mechanism. The detailed analysis of time decay profile of Terbium radiative recombination shows a variation of double exponential law toward a single exponential one. Its correlation with surface defects and non-radiative recombination was thus discussed.

  20. LLE Review 120 (July-September 2009)

    Energy Technology Data Exchange (ETDEWEB)

    Edgell, D.H., editor

    2001-02-19

    This issue has the following articles: (1) The Omega Laser Facility Users Group Workshop; (2) The Effect of Condensates and Inner Coatings on the Performance of Vacuum Hohlraum Targets; (3) Zirconia-Coated-Carbonyl-Iron-Particle-Based Magnetorheological Fluid for Polishing Optical Glasses and Ceramics; (4) All-Fiber Optical Magnetic Field Sensor Based on Faraday Rotation in Highly Terbium Doped Fiber; (5) Femtosecond Optical Pump-Probe Characterization of High-Pressure-Grown Al{sub 0.86}Ga{sub 0.14}N Single Crystals; (6) LLE's Summer High School Research Program; (7) Laser Facility Report; and (8) National Laser Users Facility and External Users Programs.

  1. Luminescent trimethoprim-polyaminocarboxylate lanthanide complex conjugates for selective protein labeling and time-resolved bioassays

    Science.gov (United States)

    Reddy, D. Rajasekhar; Pedró Rosa, Laura E.; Miller, Lawrence W.

    2011-01-01

    Labeling proteins with long-lifetime emitting lanthanide (III) chelate reporters enables sensitive, time-resolved luminescence bioaffinity assays. Heterodimers of trimethoprim (TMP) covalently linked to various cs124-sensitized, polyaminocarboxylate chelates stably retain lanthanide ions and exhibit quantum yields of europium emission up to 20% in water. A time-resolved, luminescence resonance energy transfer (LRET) assay showed that TMP-polyaminocarboxylates bind to Escherichia coli dihydrofolate reductase (eDHFR) fusion proteins with nanomolar affinity in purified solutions and in bacterial lysates. The ability to selectively impart terbium or europium luminescence to fusion proteins in complex physiological mixtures bypasses the need for specific antibodies and simplifies sample preparation. PMID:21619068

  2. Micro-meter size organogelator with tri-color luminescence (blue, green and red) activated by Dy3+, Tb3+ and Eu3+ ions.

    Science.gov (United States)

    Wang, QianMing

    2009-09-01

    The preparation of a novel type of low-molecular-weight amphiphilic organogelator bearing three long 14-alkyl chains and hydrophilic oligo(oxyethylene) groups was described. Ultra-violet absorption and fluorescence spectra give evidence of the energy transfer between organic ligands to lanthanide ions. Characteristic green, blue and red luminescence of the organogels were obtained and interesting emission properties of terbium, dysprosium and europium ions were unexpectedly observed at the first time during the order-disorder phase transition point (29 degrees C).

  3. Giant onsite electronic entropy enhances the performance of ceria for water splitting

    DEFF Research Database (Denmark)

    Naghavi, S. Shahab; Emery, Antoine A.; Hansen, Heine Anton

    2017-01-01

    lanthanides, and reaches a maximum value of ≈4.7 kB per oxygen vacancy for Ce4+/Ce3+ reduction. This unique and large positive entropy source in ceria explains its excellent performance for high-temperature catalytic redox reactions such as water splitting. Our calculations also show that terbium dioxide has......Previous studies have shown that a large solid-state entropy of reduction increases the thermodynamic efficiency of metal oxides, such as ceria, for two-step thermochemical water splitting cycles. In this context, the configurational entropy arising from oxygen off-stoichiometry in the oxide, has...

  4. Surface-Modified Gold Nanoparticles Possessing Two-Channel Responsive Eu(III) /Tb(III) Cyclen Complexes as Luminescent Logic Gate Mimics.

    Science.gov (United States)

    Truman, Laura K; Bradberry, Samuel J; Comby, Steve; Kotova, Oxana; Gunnlaugsson, Thorfinnur

    2017-07-05

    The development of material-supported molecular logic gate mimics (MGLMs) for contained application and device fabrication has become of increasing interest. Herein, we present the formation of ≈5 nm gold nanoparticles (AuNPs) that have been surface-modified (via a thiol linkage) with heptadentate cyclen-based complexes of europium and terbium for sensing applications using delayed lanthanide luminescence and as integrated logic gate mimics within competitive media. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Synthesis and characterization of multifunctional silica core-shell nanocomposites with magnetic and fluorescent functionalities

    Energy Technology Data Exchange (ETDEWEB)

    Ma Zhiya; Dosev, Dosi [Department of Mechanical and Aeronautical Engineering, University of California-Davis, One Shields Avenue, Davis CA 95616 (United States); Nichkova, Mikaela [Department of Entomology, University of California-Davis, One Shields Avenue, Davis CA 95616 (United States); Dumas, Randy K. [Department of Physics, University of California-Davis, One Shields Avenue, Davis CA 95616 (United States); Gee, Shirley J.; Hammock, Bruce D. [Department of Entomology, University of California-Davis, One Shields Avenue, Davis CA 95616 (United States); Liu Kai [Department of Physics, University of California-Davis, One Shields Avenue, Davis CA 95616 (United States); Kennedy, Ian M. [Department of Mechanical and Aeronautical Engineering, University of California-Davis, One Shields Avenue, Davis CA 95616 (United States)], E-mail: imkennedy@ucdavis.edu

    2009-05-15

    Multifunctional core-shell nanocomposites with a magnetic core and a silica shell doped with lanthanide chelate have been prepared by a simple method. First, citric acid-modified magnetite nanoparticles were synthesized by a chemical coprecipitation method. Then the magnetite nanoparticles were coated with silica shells doped with terbium (Tb{sup 3+}) complex by a modified Stoeber method based on hydrolyzing and condensation of tetraethyl orthosilicate (TEOS) and a silane precursor. These multifunctional nanocomposites are potentially useful in a variety of biological areas such as bio-imaging, bio-labeling and bioassays because they can be simultaneously manipulated with an external magnetic field and exhibit unique phosphorescence properties.

  6. Luminescent probing of the simplest chiral α-amino acid-alanine in an enantiopure and racemic state.

    Science.gov (United States)

    Tarasevych, Arkadii V; Kostyukov, Anton I; Baronskiy, Mark G; Rastorguev, Alexander A; Guillemin, Jean-Claude; Snytnikov, Valeriy N

    2017-07-01

    Luminescent spectroscopy combined with the technique of luminescent probing with rare earth ions (europium, gadolinium, terbium) and an actinide ion (uranyl) was used to differentiate enantiopure and racemic alanine, the simplest chiral proteinogenic amino acid. Using the achiral luminescent probes, small differences between pure L and DL alanine in the solid state were strongly amplified. Based on the observed electronic transitions of the probes, the position of the triplet level of the coordinated alanine was estimated. Formation of homo- and heterochiral complexes between enantiomers of alanine and the metal ions is discussed as a possible mechanism of chiral self-discrimination. © 2017 Wiley Periodicals, Inc.

  7. Investigation of magnon dispersion relations and neutron scattering cross sections with special attention to anisotropy effects

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker; Kowalska, A.; Laut, Peter

    1967-01-01

    -helical structure. A numerical calculation is performed for terbium on the basis of the Kaplan-Lyons Hamiltonian with added crystalline anisotropy. The non-istropic exchange part is shown to have a small effect on the dispersion curves, and it turns out that radical changes of the Ruderman-Kittel-type functions...... for the exchange interaction seem to be necessary for agreement with experimental dispersion curves be obtained. The effect of the anisotropy in the cross section is estimated and shown to be important for small magnon energies....

  8. Rare (Earth Elements [score

    Directory of Open Access Journals (Sweden)

    Camilo Méndez

    2014-12-01

    Full Text Available Rare (Earth Elements is a cycle of works for solo piano. The cycle was inspired by James Dillon’s Book of Elements (Vol. I-V. The complete cycle will consist of 14 pieces; one for each selected rare (earth element. The chosen elements are Neodymium, Erbium, Tellurium, Hafnium, Tantalum, Technetium, Indium, Dysprosium, Lanthanium, Cerium, Europium, Terbium, Yttrium and Darmstadtium. These elements were selected due to their special atomic properties that in many cases make them extremely valuable for the development of new technologies, and also because of their scarcity. To date, only 4 works have been completed Yttrium, Technetium, Indium and Tellurium.

  9. Alaska's rare earth deposits and resource potential

    Science.gov (United States)

    Barker, James C.; Van Gosen, Bradley S.

    2012-01-01

    Alaska’s known mineral endowment includes some of the largest and highest grade deposits of various metals, including gold, copper and zinc. Recently, Alaska has also been active in the worldwide search for sources of rare earth elements (REE) to replace exports now being limitedby China. Driven by limited supply of the rare earths, combined with their increasing use in new ‘green’ energy, lighting, transportation, and many other technological applications, the rare earth metals neodymium, europium and, in particular, the heavy rare earth elements terbium, dysprosium and yttrium are forecast to soon be in critical short supply (U.S. Department of Energy, 2010).

  10. Sol-Gel Electrolytes Incorporated by Lanthanide Luminescent Materials and Their Photophysical Properties

    Science.gov (United States)

    Yu, Chufang; Zhang, Zhengyang; Fu, Meizhen; Gao, Jinwei; Zheng, Yuhui

    2017-10-01

    A group of silica gel electrolytes with lanthanide luminescent hybrid materials were assembled and investigated. Photophysical studies showed that terbium and europium hybrids displayed characteristic green and red emissions within the electrolytes. The influence of different concentration of the lanthanide hybrids on the electrochemical behavior of a gelled electrolyte valve-regulated lead-acid battery were studied through cyclic voltammograms, electrochemical impedance spectroscopy, water holding experiments and mobility tests. The morphology and particle size were analyzed by scanning electron microscopy. The results proved that lanthanide (Tb3+/Eu3+) luminescent materials are effective additives which will significantly improve the electrochemical properties of lead-acid batteries.

  11. SPECTROSCOPIC PROPERTIES OF THE Ln-Ge COMPLEXES WITH DIETHYLENETRIAMINEPENTAACETIC ACID

    Directory of Open Access Journals (Sweden)

    Sergiy Smola

    2007-06-01

    Full Text Available Four new heteronuclear lanthanide complexes with general formula [Ge(OH(μ-HDTPALnGe(OH (μ-DTPA] (Ln = Sm – Dy were synthesized and subsequently characterized by different physico- chemical methods. The structures of new compounds have been proposed. In considered complexes the 4f-luminescence of three-charged ions of samarium, europium, terbium and dysprosium is realized at UV-excitation. It is noteworthy that it is the first observation of 4f-luminescence in water solutions of heteronuclear f-p-complexes. The comparison of luminescent characteristics of hetero- and homonuclear landthanide complexes is described and discussed as well.

  12. Tetrakis(μ-2-phenoxypropionato-κ3O,O′:O′;κ3O:O,O′,κ4O:O′-bis[(1,10-phenanthroline-κ2N,N′(2-phenoxypropionato-κ2O,O′praseodymium(III

    Directory of Open Access Journals (Sweden)

    Jin-Bei Shen

    2011-09-01

    Full Text Available In the centrosymmetric binuclear title complex, [Pr2(C9H9O36(C12H8N22], the two PrIII ions are linked by four 2-phenoxypropionate (L groups through their bi- and tridentate bridging modes. Each PrIII ion is nine-coordinated by one 1,10-phenanthroline molecule, one bidentate carboxylate group and four bridging carboxylate groups in a distorted PrN2O7 monocapped square-antiprismatic geometry. The title compound is isotypic with its terbium- and dysprosium-containing analogues.

  13. Detection of rare earth elements in Powder River Basin sub-bituminous coal ash using laser-induced breakdown spectroscopy (LIBS)

    Energy Technology Data Exchange (ETDEWEB)

    Tran, Phuoc [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United State; Mcintyre, Dustin [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United State

    2015-10-01

    We reported our preliminary results on the use of laser-induced breakdown spectroscopy to analyze the rare earth elements contained in ash samples from Powder River Basin sub-bituminous coal (PRB-coal). We have identified many elements in the lanthanide series (cerium, europium, holmium, lanthanum, lutetium, praseodymium, promethium, samarium, terbium, ytterbium) and some elements in the actinide series (actinium, thorium, uranium, plutonium, berkelium, californium) in the ash samples. In addition, various metals were also seen to present in the ash samples

  14. Faraday rotator based on TSAG crystal with orientation.

    Science.gov (United States)

    Yasuhara, Ryo; Snetkov, Ilya; Starobor, Aleksey; Mironov, Evgeniy; Palashov, Oleg

    2016-07-11

    A Faraday isolator (FI) for high-power lasers with kilowatt-level average power and 1-µm wavelength was demonstrated using a terbium scandium aluminum garnet (TSAG) with its crystal axis aligned in the direction. Furthermore, no compensation scheme for thermally induced depolarization in a magnetic field was used. An isolation ratio of 35.4 dB (depolarization ratio γ of 2.9 × 10-4) was experimentally observed at a maximum laser power of 1470 W. This result for room-temperature FIs is the best reported, and provides a simple, practical solution for achieving optical isolation in high-power laser systems.

  15. Detection of bacterial spores with lanthanide-macrocycle binary complexes.

    Science.gov (United States)

    Cable, Morgan L; Kirby, James P; Levine, Dana J; Manary, Micah J; Gray, Harry B; Ponce, Adrian

    2009-07-15

    The detection of bacterial spores via dipicolinate-triggered lanthanide luminescence has been improved in terms of detection limit, stability, and susceptibility to interferents by use of lanthanide-macrocycle binary complexes. Specifically, we compared the effectiveness of Sm, Eu, Tb, and Dy complexes with the macrocycle 1,4,7,10-tetraazacyclododecane-1,7-diacetate (DO2A) to the corresponding lanthanide aquo ions. The Ln(DO2A)(+) binary complexes bind dipicolinic acid (DPA), a major constituent of bacterial spores, with greater affinity and demonstrate significant improvement in bacterial spore detection. Of the four luminescent lanthanides studied, the terbium complex exhibits the greatest dipicolinate binding affinity (100-fold greater than Tb(3+) alone, and 10-fold greater than other Ln(DO2A)(+) complexes) and highest quantum yield. Moreover, the inclusion of DO2A extends the pH range over which Tb-DPA coordination is stable, reduces the interference of calcium ions nearly 5-fold, and mitigates phosphate interference 1000-fold compared to free terbium alone. In addition, detection of Bacillus atrophaeus bacterial spores was improved by the use of Tb(DO2A)(+), yielding a 3-fold increase in the signal-to-noise ratio over Tb(3+). Out of the eight cases investigated, the Tb(DO2A)(+) binary complex is best for the detection of bacterial spores.

  16. Structural Characterization and Absolute Luminescence Efficiency Evaluation of Gd2O2S High Packing Density Ceramic Screens Doped with Tb3+ and Eu3+ for further Applications in Radiology

    Science.gov (United States)

    Dezi, Anna; Monachesi, Elenasophie; D’Ignazio, Michela; Scalise, Lorenzo; Montalto, Luigi; Paone, Nicola; Rinaldi, Daniele; Mengucci, Paolo; Loudos, George; Bakas, Athanasios; Michail, Christos; Valais, Ioannis; Fountzoula, Christine; Fountos, George; David, Stratos

    2017-11-01

    Rare earth activators are impurities added in the phosphor material to enhance probability of visible photon emission during the luminescence process. The main activators employed are rare earth trivalent ions such as Ce+3, Tb+3, Pr3+ and Eu+3. In this work, four terbium-activated Gd2O2S (GOS) powder screens with different thicknesses (1049 mg/cm2, 425.41 mg/cm2, 313 mg/cm2 and 187.36 mg/cm2) and one europium-activated GOS powder screen (232.18 mg/cm2) were studied to investigate possible applications for general radiology detectors. Results presented relevant differences in crystallinity between the GOS:Tb doped screens and GOS:Eu screens in respect to the dopant agent present. The AE (Absolute efficiency) was found to rise (i) with the increase of the X-ray tube voltage with the highest peaking at 110kVp and (ii) with the decrease of the thickness among the four GOS:Tb. Comparing similar thickness values, the europium-activated powder screen showed lower AE than the corresponding terbium-activated.

  17. Synthesis and characterization of magnetic nanoparticles of oxides for dual MnFe{sub 2}O{sub 4} bioseparation, stabilized in fatty acid and the system chitosan - Eu(TTA){sub 3}(TPPO){sub 2}. Studies on the influence of doping with Gd{sup 3+}, Tb{sup 3+}, Ho{sup 3+} e Eu{sup 3+} in structural and magnetic properties; Sintese e caracterizacao de nanoparticulas magneticas de oxidos duplos de MnFe{sub 2}O{sub 4} para biosseparacao, estabilizadas em acido graxo e recobertas pelo sistema quitosana - Eu(TTA){sub 3}(TPPO){sub 2}. Estudo da influencia da dopagem com Gd{sup 3+}, Tb{sup 3+}, Ho{sup 3+} e Eu{sup 3+} nas propriedades estruturais e magneticas

    Energy Technology Data Exchange (ETDEWEB)

    Kovacs, Thelma Antunes Rodrigues

    2014-07-01

    This work was synthesized and characterized ferrite magnetic nanoparticles manganese, using the chemical coprecipitation method. By varying the heating time under 98°C (0, 10,20,40,60 3 80 minutes), the molar percentage of doping (1, 3, 5, 7, and 10%), gadolinium, europium, terbium and holmium. Magnetic ferrite nanoparticles and manganese ferrite doped with manganese were synthesized by coprecipitation method starting with chloride solutions of metals (iron (III), manganese (II), europium (III), gadolinium (III), terbium (III) and holmium (III)) and NaOH 5mol.L{sup -1} as precipitating agent. The magnetic nanoparticles were characterized by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, magnetization curves, and thermal analysis. Most of manganese ferrite particles showed superparamagnetic behavior. After the characterization it was found that the samples synthesized manganese ferrite with more than 40 minutes heating time, crystal structure showed the characteristic pattern of the inverted manganese ferrite spinel type. The stabilization of the samples in oleic acid nanoparticles produced with a hydrophobic outer layer and facilitated by coating chitosan biopolymer, since this has a positive charge. Among the doped samples there was no significant change in the magnetic behavior. Several techniques for characterizing these materials have been used such as X-ray diffraction spectrum in the infrared region, magnetization curves and thermal analysis. The resins were tested as magnetic material for the separation of biological materials. In this paper, are used as biological targets separation of bovine serum albumin. (author)

  18. Cerium fluoride nanoparticles protect cells against oxidative stress

    Energy Technology Data Exchange (ETDEWEB)

    Shcherbakov, Alexander B.; Zholobak, Nadezhda M. [Zabolotny Institute of Microbiology and Virology, National Academy of Sciences of Ukraine, Kyiv D0368 (Ukraine); Baranchikov, Alexander E. [Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences, Moscow 119991 (Russian Federation); Ryabova, Anastasia V. [Prokhorov General Physics Institute of the Russian Academy of Sciences, Moscow 119991 (Russian Federation); National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow 115409 (Russian Federation); Ivanov, Vladimir K., E-mail: van@igic.ras.ru [Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences, Moscow 119991 (Russian Federation); National Research Tomsk State University, Tomsk 634050 (Russian Federation)

    2015-05-01

    A novel facile method of non-doped and fluorescent terbium-doped cerium fluoride stable aqueous sols synthesis is proposed. Intense green luminescence of CeF{sub 3}:Tb nanoparticles can be used to visualize these nanoparticles' accumulation in cells using confocal laser scanning microscopy. Cerium fluoride nanoparticles are shown for the first time to protect both organic molecules and living cells from the oxidative action of hydrogen peroxide. Both non-doped and terbium-doped CeF{sub 3} nanoparticles are shown to provide noteworthy protection to cells against the vesicular stomatitis virus. - Highlights: • Facile method of CeF{sub 3} and CeF{sub 3}:Tb stable aqueous sols synthesis is proposed. • Naked CeF{sub 3} nanoparticles are shown to be non-toxic and to protect cells from the action of H{sub 2}O{sub 2}. • CeF{sub 3} and CeF{sub 3}:Tb nanoparticles are shown to protect living cells against the vesicular stomatitis virus.

  19. Synthesis and characterization of Tin / Titanium mixed oxide nanoparticles doped with lanthanide for biomarking; Sintese e caracterizacao de nanoparticulas de oxido misto de estanho/titanio dopadas com lantanideos para marcacao biologica

    Energy Technology Data Exchange (ETDEWEB)

    Paganini, Paula Pinheiro

    2012-07-01

    This work presents the synthesis, characterization and photo luminescent study of tin and titanium mixed oxide nanoparticles doped with europium, terbium and neodymium to be used with luminescent markers on biological systems. The syntheses were done by co-precipitation, protein sol-gel and Pechini methods and the nanoparticles were characterized by infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, X-ray diffraction and X-ray absorption spectroscopy. The photo luminescent properties studies were conducted for luminophores doped with europium, terbium and neodymium synthesized by coprecipitation method. For luminophore doped with europium it was possible to calculate the intensity parameters and quantum yield and it showed satisfactory results. In the case of biological system marking it was necessary the functionalization of these particles to allow them to bind to the biological part to be studied. So the nanoparticles were functionalized by microwave and Stoeber methods and characterized by infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction obtaining qualitative response of functionalization efficacy. The ninhydrin spectroscopic method was used for quantification of luminophores functionalization. The photo luminescent studies of functionalized particles demonstrate the potential applying of these luminophores as luminescent markers. (author)

  20. Fabrication of Tb3Al5O12 transparent ceramics using co-precipitated nanopowders

    Science.gov (United States)

    Dai, Jiawei; Pan, Yubai; Wang, Wei; Luo, Wei; Xie, Tengfei; Kou, Huamin; Li, Jiang

    2017-11-01

    Terbium aluminum garnet (TAG) precursor was synthesized by a co-precipitation method from a mixed solution of terbium and aluminum nitrates using ammonium hydrogen carbonate (AHC) as the precipitant. The powders calcined at different temperatures were investigated by XRD, FTIR and FESEM in order to choose the optimal calcination temperature. Fine and low-agglomerated TAG powders with average particle size of 88 nm were obtained by calcining the precursor at 1100 °C for 4 h. Using this powder as starting material, TAG transparent ceramics were fabricated by vacuum sintering combined with hot isostatic pressing (HIP) sintering. For the sample pre-sintered at 1700 °C for 20 h with HIP post-treated at 1700 °C for 3 h, the average grain size is about 3.9 μm and the in-line transmittance is beyond 55% in the region of 500-1600 nm, reaching a maximum transmittance of 64.2% at the wavelength of 1450 nm. The Verdet constant at 633 nm is measured to be -178.9 rad T-1 m-1, which is 33% larger than that of the commercial TGG single crystal (-134 rad T-1 m-1).

  1. Incorporation of Ln-Doped LaPO4 Nanocrystals as Luminescent Markers in Silica Nanoparticles.

    Science.gov (United States)

    van Hest, Jacobine J H A; Blab, Gerhard A; Gerritsen, Hans C; Donega, Celso de Mello; Meijerink, Andries

    2016-12-01

    Lanthanide ions are promising for the labeling of silica nanoparticles with a specific luminescent fingerprint due to their sharp line emission at characteristic wavelengths. With the increasing use of silica nanoparticles in consumer products, it is important to label silica nanoparticles in order to trace the biodistribution, both in the environment and living organisms.In this work, we synthesized LaPO4 nanocrystals (NCs) with sizes ranging from 4 to 8 nm doped with europium or cerium and terbium. After silica growth using an inverse micelle method, monodisperse silica spheres were obtained with a single LaPO4 NC in the center. We demonstrate that the size of the silica spheres can be tuned in the 25-55 nm range by addition of small volumes of methanol during the silica growth reaction. Both the LaPO4 core and silica nanocrystal showed sharp line emission characteristic for europium and terbium providing unique optical labels in silica nanoparticles of variable sizes.

  2. Magnetic phase transitions in TbFe sub 2 Al sub 1 sub 0 , HoFe sub 2 Al sub 1 sub 0 and ErFe sub 2 Al sub 1 sub 0

    CERN Document Server

    Reehuis, M; Krimmel, A; Scheidt, E W; Stüsser, N; Loidl, A; Jeitschko, W

    2003-01-01

    The magnetic order of the orthorhombic aluminides TbFe sub 2 Al sub 1 sub 0 , HoFe sub 2 Al sub 1 sub 0 and ErFe sub 2 Al sub 1 sub 0 (space group Cmcm) has been studied by specific heat and magnetic measurements, as well as by neutron powder diffraction down to 100 mK and in external fields up to 5 T. Only the rare-earth ions carry a magnetic moment. At T = 1.5 K the terbium moments in TbFe sub 2 Al sub 1 sub 0 show a square-wave modulated magnetic order with wavevector k = (0, 0.7977, 0) and a moment direction parallel to the a-axis. At a critical field of H sub c sub 1 = 0.9 T one of ten spins is forced to flip, going into an intermediate ferrimagnetic phase that is stable up to the critical field H sub c sub 2 = 1.8 T. Above this field finally all the rest of the spins flip, resulting in a ferromagnetic order of the terbium moments. ErFe sub 2 Al sub 1 sub 0 orders antiferromagnetically below T sub N 1.77(7) K with a similar magnetic structure characterized by a wavevector k (0, approx 0.8, 0). In contras...

  3. Deuteron induced Tb-155 production, a theranostic isotope for SPECT imaging and auger therapy.

    Science.gov (United States)

    Duchemin, C; Guertin, A; Haddad, F; Michel, N; Métivier, V

    2016-12-01

    Several terbium isotopes are suited for diagnosis or therapy in nuclear medicine. Tb-155 is of interest for SPECT imaging and/or Auger therapy. High radionuclide purity is mandatory for many applications in medicine. The quantification of the activity of the produced contaminants is therefore as important as that of the radionuclide of interest. The experiments performed at the ARRONAX cyclotron (Nantes, France), using the deuteron beam delivered up to 34MeV, provide an additional measurement of the excitation function of the Gd-nat(d,x)Tb-155 reaction and of the produced terbium and gadolinium contaminants. In this study, we investigate the achievable yield for each radionuclide produced in natural gadolinium as a function of the deuteron energy. Other reactions are discussed in order to define the production route that could provide Tb-155 with a high yield and a high radionuclide purity. This article aims to improve data for the Gd-nat(d,x) reaction and to optimize the irradiation conditions required to produce Tb-155. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Responsive hybrid inorganic-organic system derived from lanthanide luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhan [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Zheng, Yuhui, E-mail: yhzheng78@scnu.edu.cn [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Jiang, Lasheng; Yang, Jinglian [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Wang, Qianming, E-mail: qmwang@scnu.edu.cn [Key Laboratory of Theoretical Chemistry of Environment, Ministry of Education, School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Guangzhou Key Laboratory of Materials for Energy Conversion and Storage, Guangzhou 510006 (China)

    2016-05-15

    Highlights: • A novel covalent hybrid material was used to detect hemoglobin. • All the recognition experiments were performed in buffer solution. • Porous nano-structures was extensively studied for the recognition. - Abstract: Terbium ions were incorporated into new organic-inorganic matrices to achieve intense green emissions. Hemoglobin (HB) interactions lead to dramatic changes in the luminescence emission intensities. Infrared spectra, morphological studies and photoluminescence give information for the speciation and process of hemoglobin additions. The porous material has a large specific surface area of 351 cm{sup 2}/g and the detection limit for HB (0.7 μM) was much lower than its physical doped material (8 μM). This promising hybrid material will lead to the design of versatile optical probes that are efficiently responding to the external targets.

  5. Optical fiber sensor for low dose gamma irradiation monitoring

    Science.gov (United States)

    de Andrés, Ana I.; Esteban, Ã.`scar; Embid, Miguel

    2016-05-01

    An optical fiber gamma ray detector is presented in this work. It is based on a Terbium doped Gadolinium Oxysulfide (Gd2O2S:Tb) scintillating powder which cover a chemically etched polymer fiber tip. This etching improves the fluorescence gathering by the optical fiber. The final diameter has been selected to fulfill the trade-off between light gathering and mechanical strength. Powder has been encapsulated inside a microtube where the fiber tip is immersed. The sensor has been irradiated with different air Kerma doses up to 2 Gy/h with a 137Cs source, and the spectral distribution of the fluorescence intensity has been recorded in a commercial grade CCD spectrometer. The obtained signal-to-noise ratio is good enough even for low doses, which has allowed to reduce the integration time in the spectrometer. The presented results show the feasibility for using low cost equipment to detect/measure ionizing radiation as gamma rays are.

  6. See Also:physica status solidi (b)physica status solidi (c)Copyright © 2004 WILEY-VCH Verlag GmbH & Co. KGaA, WeinheimGet Sample CopyFree Online Trial -->Recommend to Your LibrarianSave Title to My ProfileSet E-Mail Alert Journal subnav -->var homepagelinks = new Array(new Array("Journal Home","/cgi-bin/jhome/40000761",""),new Array("Issues","/cgi-bin/jtoc/40000761/",""),new Array("Early View","/cgi-bin/jeview/40000761/",""),new Array("News","/cgi-bin/jabout/40000761/news/index.html",""),new Array("Reviews","/cgi-bin/jabout/40000761/reviews.html",""),new Array("Read Cover Story","/cgi-bin/jabout/40000761/cover/2231/current.html","e"),new Array("","","s"),new Array("Product Information","/cgi-bin/jabout/40000761/2231_info.html",""),new Array("Editorial Board","/cgi-bin/jabout/40000761/edbd.html",""),new Array("For Authors","/cgi-bin/jabout/40000761/authors.html",""),new Array("For Referees","/cgi-bin/jabout/40000761/refserv.html",""),new Array("Subscribe","http://jws-edcv.wiley.com/jcatalog/JournalsCatalogOrder/JournalOrder?PRINT_ISSN=0031-8965",""),new Array("Contact","/cgi-bin/jabout/40000761/contact.html",""),new Array("Online Submission","http://www.manuscriptxpress.org/osm/",""),new Array("","","x"));writeJournalLinks("", "40000761");Journal subnav -->journal info area -->journal info area --> Previous Issue | Next Issue >Volume 201, Issue12 (September 2004)Articles in the Current Issue:article list -->Rapid Research NoteEffects of high dose proton irradiation on the electrical performance of ZnO Schottky diodes

    Science.gov (United States)

    Khanna, Rohit; Ip, K.; Allums, K. K.; Baik, K.; Abernathy, C. R.; Pearton, S. J.; Heo, Y. W.; Norton, D. P.; Ren, F.; Dwivedi, R.; Fogarty, T. N.; Wilkins, R.

    2004-09-01

    The preparation and characterization of terbium doped zinc aluminate photoluminescent films obtained by ultrasonic spray pyrolysis deposition process are described. Variations on doping concentrations in the start spraying solution and substrate temperatures were studied. XRD measurements on these films showed that the crystalline structure depends on the substrate temperature. For an excitation wavelength of 242 nm, all the photoluminescence spectra show peaks located at 488 nm, 546 nm, 589 nm and 621 nm. The photoluminescence intensity reaches values practically constant for the samples deposited at substrate temperatures higher than 400 °C. In this case, concentration quenching of the photoluminescence appears at doping concentrations greater than 0.93 atomic percent into the films. The surface morphology characteristics of the films deposited on glass and silicon substrates, as a function of the deposition temperature, are presented.

  7. Luminescent lanthanide chelates and methods of use

    Science.gov (United States)

    Selvin, Paul R.; Hearst, John

    1997-01-01

    The invention provides lanthanide chelates capable of intense luminescence. The celates comprise a lanthanide chelator covalently joined to a coumarin-like or quinolone-like sensitizer. Exemplary sensitzers include 2- or 4-quinolones, 2- or 4-coumarins, or derivatives thereof e.g. carbostyril 124 (7-amino-4-methyl-2-quinolone), coumarin 120 (7-amino-4-methyl-2-coumarin), coumarin 124 (7-amino-4-(trifluoromethyl)-2-coumarin), aminomethyltrimethylpsoralen, etc. The chelates form high affinity complexes with lanthanides, such as terbium or europium, through chelator groups, such as DTPA. The chelates may be coupled to a wide variety of compounds to create specific labels, probes, diagnostic and/or therapeutic reagents, etc. The chelates find particular use in resonance energy transfer between chelate-lanthanide complexes and another luminescent agent, often a fluorescent non-metal based resonance energy acceptor. The methods provide useful information about the structure, conformation, relative location and/or interactions of macromolecules.

  8. Creating infinite contrast in fluorescence microscopy by using lanthanide centered emission

    DEFF Research Database (Denmark)

    R. Carro-Temboury, Miguel; Arppe, Riikka Matleena; Hempel, Casper

    2017-01-01

    for completely removing the background signal in spectrally resolved fluorescence microscopy. The methodology is applicable for all probes with narrow and well-defined emission bands (Full width half-maximum lanthanide based probes exploiting the narrow emission lines of europium......(III) and terbium(III) ions. We used a model system with zeolites doped with lanthanides immobilized in a polymer stained with several fluorescent dyes regularly used in bioimaging. After smoothing the spectral data recorded in each pixel, they are differentiated. Method I is based on the direct sum of the gradient......, while method II resolves the fluorescent signal by subtracting a background calculated via the gradient. Both methods improve signal-to-background ratio significantly and we suggest that spectral imaging of lanthanide-centered emission can be used as a tool to obtain absolute contrast in bioimaging....

  9. Luminescent Lanthanide Metal Organic Frameworks for cis-Selective Isoprene Polymerization Catalysis

    Directory of Open Access Journals (Sweden)

    Samantha Russell

    2015-11-01

    Full Text Available In this study, we are combining two areas of chemistry; solid-state coordination polymers (or Metal-Organic Framework—MOF and polymerization catalysis. MOF compounds combining two sets of different lanthanide elements (Nd3+, Eu3+/Tb3+ were used for that purpose: the use of neodymium was required due to its well-known catalytic properties in dienes polymerization. A second lanthanide, europium or terbium, was included in the MOF structure with the aim to provide luminescent properties. Several lanthanides-based MOF meeting these criteria were prepared according to different approaches, and they were further used as catalysts for the polymerization of isoprene. Stereoregular cis-polyisoprene was received, which in some cases exhibited luminescent properties in the UV-visible range.

  10. Method for compensation of thermally induced modal distortions in the input optical components of gravitational wave interferometers

    CERN Document Server

    Müller, G; Guagliardo, D; McFeron, D; Lundock, R; Reitze, D H; Tanner, D B

    2002-01-01

    The next generation of interferometric gravitational wave detectors will employ laser powers approaching 200 W to increase shot-noise limited sensitivity. Optical components that transmit the laser light will exhibit increased thermal lensing induced by bulk absorption and concomitant changes in the material refractive index, resulting in significant changes in the modal characteristics of the beam. Key interferometer components such as electro-optic modulators and Faraday isolators are particularly at risk, since they possess relatively large absorption coefficients. We present a method for passive correction of thermally induced optical path length (DELTA LAMBDA) changes induced by absorption in transmissive optical components. Our method relies on introducing material in the optical path that possesses a negative index temperature derivative, thereby inducing a compensating opposite DELTA LAMBDA. We experimentally demonstrate a factor of 10 reduction in higher order spatial mode generation for terbium gall...

  11. High-density scintillating glasses for a proton imaging detector

    Science.gov (United States)

    Tillman, I. J.; Dettmann, M. A.; Herrig, V.; Thune, Z. L.; Zieser, A. J.; Michalek, S. F.; Been, M. O.; Martinez-Szewczyk, M. M.; Koster, H. J.; Wilkinson, C. J.; Kielty, M. W.; Jacobsohn, L. G.; Akgun, U.

    2017-06-01

    High-density scintillating glasses are proposed for a novel proton-imaging device that can improve the accuracy of the hadron therapy. High-density scintillating glasses are needed to build a cost effective, compact calorimeter that can be attached to a gantry. This report summarizes the study on Europium, Terbium, and Cerium-doped scintillating glasses that were developed containing heavy elements such as Lanthanum, Gadolinium, and Tungsten. The density of the samples reach up to 5.9 g/cm3, and their 300-600 nm emission overlaps perfectly with the peak cathode sensitivity of the commercial photo detectors. The developed glasses do not require any special quenching and can be poured easily, which makes them a good candidate for production in various geometries. Here, the glass making conditions, preliminary tests on optical and physical properties of these scintillating, high-density, oxide glasses developed for a novel medical imaging application are reported.

  12. Heat-Flux Gage thermophosphor system

    Energy Technology Data Exchange (ETDEWEB)

    Tobin, K.W.

    1991-08-01

    This document describes the installation, hardware requirements, and application of the Heat-Flux Gage (Version 1.0) software package developed by the Oak Ridge National Laboratory, Applied Technology Division. The developed software is a single component of a thermographic phosphor-based temperature and heat-flux measurement system. The heat-flux transducer was developed by EG G Energy Measurements Systems and consists of a 1- by 1-in. polymethylpentene sheet coated on the front and back with a repeating thermographic phosphor pattern. The phosphor chosen for this application is gadolinium oxysulphide doped with terbium. This compound has a sensitive temperature response from 10 to 65.6{degree}C (50--150{degree}F) for the 415- and 490-nm spectral emission lines. 3 refs., 17 figs.

  13. Radioluminescence of rare-earth doped aluminum oxide

    Energy Technology Data Exchange (ETDEWEB)

    Santiago, M.; Molina, P. [Universidad Nacional del Centro de la Provincia de Buenos Aires, Instituto de Fisica Arroyo Seco, Pinto 399, 7000 Tandil (Argentina); Barros, V. S.; Khoury, H. J.; Elihimas, D. R., E-mail: msantiag@exa.unicen.edu.ar [Universidade Federal de Pernambuco, Departamento de Energia Nuclear, Av. Prof. Luiz Freire 1000, Recife, PE 50740-540 (Brazil)

    2011-10-15

    Carbon-doped aluminum oxide (Al{sub 2}O{sub 3}:C) is one of the most used radioluminescence (Rl) materials for fiberoptic dosimetry due to its high efficiency and commercial availability. However, this compound presents the drawback of emitting in the spectral region, where the spurious radioluminescence of fibers is also important. In this work, the radioluminescence response of rare-earth doped Al{sub 2}O{sub 3} samples has been evaluated. The samples were prepared by mixing stoichiometric amounts of aluminum nitrate, urea and dopants with different amounts of terbium, samarium, cerium and thulium nitrates varying from 0 to 0.15 mo 1%. The influence of the different activators on the Rl spectra has been investigated in order to determine the feasibility of using these compounds for Rl fiberoptic dosimetry. (Author)

  14. Messenger RNA Detection in Leukemia Cell lines by Novel Metal-Tagged in situ Hybridization using Inductively Coupled Plasma Mass Spectrometry.

    Science.gov (United States)

    Ornatsky, Olga I; Baranov, Vladimir I; Bandura, Dmitry R; Tanner, Scott D; Dick, John

    2006-01-01

    Conventional gene expression profiling relies on using fluorescent detection of hybridized probes. Physical characteristics of fluorophores impose limitations on achieving a highly multiplex gene analysis of single cells. Our work demonstrates the feasibility of using metal-tagged in situ hybridization for mRNA detection by inductively coupled plasma mass spectrometry (ICP-MS). ICP-MS as an analytical detector has a number of unique and relevant properties: 1) metals and their stable isotopes generate non-overlapping distinct signals that can be detected simultaneously; 2) these signals can be measured over a wide dynamic range; 3) ICP-MS is quantitative and very sensitive. We used commercial antibodies conjugated to europium (Eu) and gold together with biotinylated oligonucleotide probes reacted with terbium-labeled streptavidin to demonstrate simultaneous mRNA and protein detection by ICP-MS in leukemia cells.

  15. Magnetic behaviour of TbPc2 single-molecule magnets chemically grafted on silicon surface.

    Science.gov (United States)

    Mannini, Matteo; Bertani, Federico; Tudisco, Cristina; Malavolti, Luigi; Poggini, Lorenzo; Misztal, Kasjan; Menozzi, Daniela; Motta, Alessandro; Otero, Edwige; Ohresser, Philippe; Sainctavit, Philippe; Condorelli, Guglielmo G; Dalcanale, Enrico; Sessoli, Roberta

    2014-08-11

    Single-molecule magnets (SMMs) are among the most promising molecular systems for the development of novel molecular electronics based on spin transport. Going beyond investigations focused on physisorbed SMMs, in this work the robust grafting of terbium(III) bis(phthalocyaninato) complexes to a silicon surface from a diluted solution is achieved by rational chemical design yielding the formation of a partially oriented monolayer on the conducting substrate. Here by exploiting the surface sensitivity of X-ray circular magnetic dichroism, we evidence an enhancement of the magnetic bistability of this SMM, in contrast to the dramatic reduction of the magnetic hysteresis that characterizes monolayer deposits evaporated on noble and ferromagnetic metals. Photoelectron spectroscopy investigations and density functional theory analysis suggest a non-innocent role played by the silicon substrate, evidencing the potentiality of this approach for robust integration of bistable magnetic molecules in electronic devices.

  16. Penicillium expansum Link strain for a biometallurgical method to recover REEs from WEEE.

    Science.gov (United States)

    Di Piazza, Simone; Cecchi, Grazia; Cardinale, Anna Maria; Carbone, Cristina; Mariotti, Mauro Giorgio; Giovine, Marco; Zotti, Mirca

    2017-02-01

    Due to the wide range of applications in high-tech solutions, Rare Earth Elements (REEs) have become object of great interest. In the last years several studies regarding technologies for REE extraction from secondary resources have been carried out. In particular biotechnologies, which use tolerant and accumulator microorganisms to recover and recycle precious metals, are replacing traditional methods. This paper describes an original biometallurgical method to recover REEs from waste electrical and electronic equipment (WEEE) by using a strain of Penicillium expansum Link isolated from an ecotoxic metal contaminated site. The resulting product is a high concentrated solution of Lanthanum (up to 390ppm) and Terbium (up to 1520ppm) obtained from WEEE. Under this perspective, the proposed protocol can be considered a method of recycling exploiting biometallurgy. Finally, the process is the subject of the Italian patent application n. 102015000041404 submitted by the University of Genoa. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Infrared Spectroscopic Characterization of Photoluminescent Polymer Nanocomposites

    Directory of Open Access Journals (Sweden)

    Kyle Gipson

    2015-01-01

    Full Text Available Organicallycoated inorganic nanoparticles were synthesized to produce photoluminescent nanocomposites based on a polymethyl methacrylate (PMMA matrix. The nanoparticles comprised organic ligands (acetylsalicylic acid, ASA, and 2-picolinic acid, PA attached to the lanthanum trifluoride (LaF3 host crystals that were doped with optically active terbium III (Tb3+ and synthesized using solution-based methods. The ligands were employed to functionalize the surface of Tb3+:LaF3 nanocrystals to aid in dispersing the nanoparticles. In order to confirm the presence of the constituents within the inorganic-organic system, the nanoparticles were characterized by infrared spectroscopy and energy-dispersive X-ray spectroscopy. Absorption peaks observed from infrared spectroscopy for all the polymer nanocomposites loaded with organic surface treated nanocrystals exhibited peaks that were not present in undoped PMMA but were characteristic of the dopant and the ligand.

  18. Complex logic functions implemented with quantum dot bionanophotonic circuits.

    Science.gov (United States)

    Claussen, Jonathan C; Hildebrandt, Niko; Susumu, Kimihiro; Ancona, Mario G; Medintz, Igor L

    2014-03-26

    We combine quantum dots (QDs) with long-lifetime terbium complexes (Tb), a near-IR Alexa Fluor dye (A647), and self-assembling peptides to demonstrate combinatorial and sequential bionanophotonic logic devices that function by time-gated Förster resonance energy transfer (FRET). Upon excitation, the Tb-QD-A647 FRET-complex produces time-dependent photoluminescent signatures from multi-FRET pathways enabled by the capacitor-like behavior of the Tb. The unique photoluminescent signatures are manipulated by ratiometrically varying dye/Tb inputs and collection time. Fluorescent output is converted into Boolean logic states to create complex arithmetic circuits including the half-adder/half-subtractor, 2:1 multiplexer/1:2 demultiplexer, and a 3-digit, 16-combination keypad lock.

  19. Creating infinite contrast in fluorescence microscopy by using lanthanide centered emission

    DEFF Research Database (Denmark)

    R. Carro-Temboury, Miguel; Arppe, Riikka Matleena; Hempel, Casper

    2017-01-01

    The popularity of fluorescence microscopy arises from the inherent mode of action, where the fluorescence emission from probes is used to visualize selected features on a presumed dark background. However, the background is rarely truly dark, and image processing and analysis is needed to enhance...... for completely removing the background signal in spectrally resolved fluorescence microscopy. The methodology is applicable for all probes with narrow and well-defined emission bands (Full width half-maximum emission lines of europium......(III) and terbium(III) ions. We used a model system with zeolites doped with lanthanides immobilized in a polymer stained with several fluorescent dyes regularly used in bioimaging. After smoothing the spectral data recorded in each pixel, they are differentiated. Method I is based on the direct sum of the gradient...

  20. TbNb6Sn6: the first ternary compound from the rare earth–niobium–tin system

    Directory of Open Access Journals (Sweden)

    Viktor Hlukhyy

    2010-12-01

    Full Text Available The title compound, terbium hexaniobium hexastannide, TbNb6Sn6, is the first ternary compound from the rare earth–niobium–tin system. It has the HfFe6Ge6 structure type, which can be analysed as an intergrowth of the Zr4Al3 and CaCu5 structures. All the atoms lie on special positions; their coordination geometries and site symmetries are: Tb (dodecahedron 6/mmm; Nb (distorted icosahedron 2mm; Sn (Frank–Caspar polyhedron, CN = 14–15 6mm and overline{6}m2; Sn (distorted icosahedron overline{6}m2. The structure contains a graphite-type Sn network, Kagome nets of Nb atoms, and Tb atoms alternating with Sn2 dumbbells in the channels.

  1. Robust lanthanide emitters in polyelectrolyte thin films for photonic applications

    Science.gov (United States)

    Greenspon, Andrew S.; Marceaux, Brandt L.; Hu, Evelyn L.

    2018-02-01

    Trivalent lanthanides provide stable emission sources at wavelengths spanning the ultraviolet through the near infrared with uses in telecommunications, lighting, and biological sensing and imaging. We describe a method for incorporating an organometallic lanthanide complex within polyelectrolyte multilayers, producing uniform, optically active thin films on a variety of substrates. These films demonstrate excellent emission with narrow linewidths, stable over a period of months, even when bound to metal substrates. Utilizing different lanthanides such as europium and terbium, we are able to easily tune the resulting wavelength of emission of the thin film. These results demonstrate the suitability of this platform as a thin film emitter source for a variety of photonic applications such as waveguides, optical cavities, and sensors.

  2. Design and Development of a Magneto-Optic Sensor for Magnetic Field Measurements

    Directory of Open Access Journals (Sweden)

    Sarbani CHAKRABORTY

    2015-01-01

    Full Text Available A magneto-optic sensor is developed using a Terbium Doped Glass (TDG element as a Faraday rotation sensor and optical fiber as light transmitting and receiving medium. Online LabView based application software is developed to process the sensor output. The system is used to sense the magnetic field of a DC motor field winding in industrial environment. The sensor output is compared with the magnetic flux density variation obtained with a calibrated Hall Magnetic sensor (Gauss Meter. A linear variation of sensor output over wide range of current passing through the field winding is obtained. Further the results show an improved sensitivity of magneto-optic sensor over the Hall sensor.

  3. Photon Self-Induced Spin to Orbital Conversion in TGG crystal at high laser power

    CERN Document Server

    Mosca, S; Karimi, E; Piccirillo, B; Marrucci, L; De Rosa, R; Genin, E; Milano, L; Santamato, E

    2010-01-01

    In this paper, we present experimental evidence of a newly discovered third-order nonlinear optical process Self-Induced Spin-to-Orbital Conversion (SISTOC) of the photon angular momentum. This effect is the physical mechanism at the origin of the depolarization of very intense laser beams propagating in isotropic materials. The SISTOC process, like self-focusing, is triggered by laser heating leading to a radial temperature gradient in the medium. In this work we tested the occurrence of SISTOC in a terbium gallium garnet (TGG) rod for an impinging laser power of about 100~W. To study the SISTOC process we used different techniques: polarization analysis, interferometry and tomography of the photon orbital angular momentum. Our results confirm, in particular, that the apparent depolarization of the beam is due to the occurrence of maximal entanglement between the spin and orbital angular momentum of the photons undergoing the SISTOC process. This explanation of the true nature of the depolarization mechanism...

  4. Síntese, caracterização e propriedades espectroscópicas de criptatos de lantanídeo do tipo [LnÌ(bipy2py(CO2Et 23+

    Directory of Open Access Journals (Sweden)

    Nova Suzana P. Vila

    2004-01-01

    Full Text Available This work reports on the synthesis, characterization (infrared and hidrogen nmr spectra and photophysical properties (luminescence spectra and emission quantum yield of the lanthanide cryptates [LnÌ(bipy2py(CO2Et 2]3+ with Ln = Eu3+, Tb3+ or Gd3+, which can be applied as efficient Light-Conversion-Molecular-Devices. From emission spectra of [EuÌ(bipy2py(CO2Et 2]3+ it was possible to assign C3 symmetry to the metal ion. The spectroscopic studies show a higher emission quantum yield (q=25% for [TbÌ(bipy2py(CO2Et 2]3+ in aqueous solution, whereas the europium cryptate presents q=14%. This is justified by a more efficient energy transfer between triplet and emission levels of terbium (T->5D4.

  5. Inorganic phosphate nanorods are a novel fluorescent label in cell biology

    Directory of Open Access Journals (Sweden)

    Mukherjee Priyabrata

    2006-10-01

    Full Text Available Abstract We report the first use of inorganic fluorescent lanthanide (europium and terbium ortho phosphate [LnPO4·H2O, Ln = Eu and Tb] nanorods as a novel fluorescent label in cell biology. These nanorods, synthesized by the microwave technique, retain their fluorescent properties after internalization into human umbilical vein endothelial cells (HUVEC, 786-O cells, or renal carcinoma cells (RCC. The cellular internalization of these nanorods and their fluorescence properties were characterized by fluorescence spectroscopy (FS, differential interference contrast (DIC microscopy, confocal microscopy, and transmission electron microscopy (TEM. At concentrations up to 50 μg/ml, the use of [3H]-thymidine incorporation assays, apoptosis assays (TUNEL, and trypan blue exclusion illustrated the non-toxic nature of these nanorods, a major advantage over traditional organic dyes

  6. Processes and Technologies for the Recycling of Spent Fluorescent Lamps

    Directory of Open Access Journals (Sweden)

    Kujawski Wojciech

    2014-09-01

    Full Text Available The growing industrial application of rare earth metals led to great interest in the new technologies for the recycling and recovery of REEs from diverse sources. This work reviews the various methods for the recycling of spent fluorescent lamps. The spent fluorescent lamps are potential source of important rare earth elements (REEs such as: yttrium, terbium, europium, lanthanum and cerium. The characteristics of REEs properties and construction of typical fl uorescent lamps is described. The work compares also current technologies which can be utilized for an efficient recovery of REEs from phosphors powders coming from spent fluorescent lamps. The work is especially focused on the hydrometallurgical and pyrometallurgical processes. It was concluded that hydrometallurgical processes are especially useful for the recovery of REEs from spent fluorescent lamps. Moreover, the methods used for recycling of REEs are identical or very similar to those utilized for the raw ores processing.

  7. Electroluminescence characteristics of a new kind of rare-earth complex: TbY(o-MOBA){sub 6}(phen){sub 2} {center_dot}2H{sub 2}O

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Yumeng [Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China); Deng, Zhenbo [Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China)]. E-mail: zbdeng@center.njtu.edu.cn; Xiao, Jing [Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China); Xu, Denghui [Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China); Chen, Zheng [Key Laboratory of Luminescence and Optical Information, Ministry of Education, Institute of Optoelectronic Technology, Beijing Jiaotong University, Beijing 100044 (China); Wang, Ruifen [Department of Chemistry, Heibei Normal University, Shijiazhuang 050091 (China)

    2007-01-15

    A new rare-earth complex TbY(o-MOBA){sub 6}(phen){sub 2} {center_dot}2H{sub 2}O was synthesized, which was used as an emitting material in electroluminescence device. This was doped into poly(N-vinylcarbazole) and two devices were fabricated having structures of (1) Glass/ITO/PVK:RE complex/LiF/Al, and (2) Glass/ITO/PVK:RE complex/BCP/AlQ/LiF/Al. As compared with a different Terbium complex Tb(o-MOBA){sub 3}phen{center_dot}H{sub 2}O, the photoluminescence and electroluminescence mechanisms were discussed. Bright green emission was obtained from the optimized multi-layer device and the highest brightness reached 124.5 cd/m{sup 2} at the voltage of 23 V.

  8. Thermoluminescence on ZrO{sub 2} films with different dopants; Termoluminiscencia en peliculas de ZrO{sub 2} con distintos impurificantes

    Energy Technology Data Exchange (ETDEWEB)

    Ceron R, P. V.; Rivera M, T.; Ramos G, A. I.; Guzman M, J.; Montes R, E., E-mail: victceronr@hotmail.com [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Av. Legaria No. 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico)

    2015-10-15

    Full text: The metal oxides doped with rare earths have presented good thermoluminescent properties for certain wavelengths in the UV. With respect to zirconium oxide exist several studies in which were incorporated impurities and their properties as dosimeter in several regions of the electromagnetic spectrum were analyzed. Because of this background, in this material thermoluminescent glow curves induced by UV in films of ZrO{sub 2}:Eu and ZrO{sub 2}:Tb were studied for comparison with the response of the material doped with two rare earths (ZrO{sub 2}:Eu + Tb). Samples were deposited on glass by ultrasonic spray pyrolysis technique with different synthesis parameters. It was found that the strongest Tl response was to ZrO{sub 2} film doped with terbium (14 times more intense than the film of ZrO{sub 2}:Eu and 6 times the response of ZrO{sub 2}:Eu + Tb). (Author)

  9. Growth and Faraday rotation characteristics of Tb2Sn2O7 crystal

    Science.gov (United States)

    Guo, F. Y.; Wan, Q. P.; Hou, Y.; Zhang, L. Z.; Fu, H.; Chen, J. Z.

    2014-07-01

    Tb2Sn2O7 (TSO) single crystals have been grown by the top-seeded solution growth (TSSG) method using a Na2B4O7-NaF mixture as the flux. In this paper, the morphology of as-grown TSO crystals is briefly described and the valences of terbium and tin in crystal were analyzed by X-ray photoelectron spectroscopy. The transmission spectrum was measured in the wavelength range of 400-1600 nm at room temperature and the Faraday rotation of a TSO crystal was investigated at 532, 633 and 1064 nm wavelengths by the extinction method. Results show that TSO crystals exhibit typical paramagnetism when the temperature is above 2 K and have a larger Verdet constant than that reported for TGG.

  10. Lanthanide complexes of a picolinate ligand derived from 1,4,7-triazacyclononane with potential application in magnetic resonance imaging and time-resolved luminescence imaging.

    Science.gov (United States)

    Nonat, Aline; Gateau, Christelle; Fries, Pascal H; Mazzanti, Marinella

    2006-09-18

    The new potentially octadentate ligand, 1-(carboxymethyl)-4,7-bis[(6-carboxypyridin-2-yl)methyl]-1,4,7-triazacyclononane (H(3)bpatcn), in which two picolinate arms and one acetate arm are connected to the 1,4,7-triazacyclonane core, has been prepared. Potentiometric studies show an increased stability of the Gd(III) complex of H(3)bpatcn (logK(GdL)=15.8(2)) with respect to the Gd(III) complex of the analogous ligand 1,4,7-triazacyclononane-N,N',N''-triacetic acid (H(3)nota) (logK(GdL)=13.7), associated with an increased selectivity of H(3)bpatcn for gadolinium over calcium. The H(3)bpatcn ligand sensitises the terbium ion very efficiently, leading to a long-lived and highly luminescent terbium complex (quantum yield=43 %), in spite of the presence of a coordinated water molecule. (1)H proton NMR studies indicate that the metal ion is rigidly encapsulated by the three arms of the octadentate ligand H(3)bpatcn and that the macrocycle framework remains bound (through the five nitrogen and the three oxygen atoms) even at high temperature. A new theoretical method for interpreting the water proton relaxivity is presented. It is based on recent progresses in the description of the electronic spin relaxation and on an auxiliary probe solute. It replaces the Solomon, Bloembergen and Morgan (SBM) framework, which is questionable at low field, while avoiding resorting to simulations and/or sophisticated theories with additional unknown zero-field splitting (ZFS) parameters. The inclusion of two picolinate groups on a triazacyclononane framework affords the mono-aquo gadolinium complex [Gd(bpatcn)(H(2)O)] with favourable electron-relaxation properties (tau(eff)(S0)=125 ps). The optimisation of the electronic relaxation by ligand design is especially important to achieve high relaxivity in the new generation macromolecular complexes with long rotational correlation times.

  11. Competing exchange interactions and magnetic anisotropy of La{sub 1−x}Tb{sub x}Mn{sub 2}Si{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Gerasimov, E.G., E-mail: gerasimov@imp.uran.ru [Institute of Metal Physics UB RAS, S. Kovalevskaya str., 18, 620990 Ekaterinburg (Russian Federation); Mushnikov, N.V.; Terentev, P.B.; Yazovskikh, K.A.; Titov, I.S.; Gaviko, V.S. [Institute of Metal Physics UB RAS, S. Kovalevskaya str., 18, 620990 Ekaterinburg (Russian Federation); Umetsu, Rie Y. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan)

    2017-01-15

    Crystal structure, magnetization and magnetic susceptibility have been studied for the La{sub 1−x}Tb{sub x}Mn{sub 2}Si{sub 2} (0≤x≤1) polycrystalline and quasi-single crystalline samples. It has been shown that, at low temperature T =4.2 K, substitution of the terbium for lanthanum leads to recurred change of the type of interlayer Mn-Mn magnetic ordering. For the compounds with x<0.2 ≈ x{sub c1} the manganese magnetic moments of adjacent layers are ordered ferromagnetically, in the concentration range 0.2x{sub c2} the Mn sublattice is again ferromagnetically ordered and, due to the negative Tb–Mn interaction, ferrimagnetic structure is formed. Using the magnetization data, the concentration magnetic phase diagram has been suggested. The observed variation of the type of magnetic ordering has been explained in terms of the change of interatomic Mn-Mn distances and a competition of the Tb–Mn, Mn–Mn and Tb–Tb interlayer exchange interactions. - Highlights: • Crystal structure and magnetic properties have been studied for the polycrystalline and quasi-single crystalline samples. • Substitution of the terbium for lanthanum leads to recurred change of the type of interlayer Mn–Mn magnetic ordering. • The compounds have high magnetic anisotropy, the tetragonal c-axis being the easy magnetization direction. • The magnetic x-T phase diagram includes five different magnetically ordered states.

  12. A luminescence-based probe for sensitive detection of hydrogen peroxide in seconds

    Energy Technology Data Exchange (ETDEWEB)

    Zscharnack, Kristin; Kreisig, Thomas; Prasse, Agneta A. [Institute of Bioanalytical Chemistry, Faculty of Chemistry and Mineralogy, Universität Leipzig, Deutscher Platz 5, Leipzig 04103 (Germany); Zuchner, Thole, E-mail: zuechner@rz.uni-leipzig.de [Institute of Bioanalytical Chemistry, Faculty of Chemistry and Mineralogy, Universität Leipzig, Deutscher Platz 5, Leipzig 04103 (Germany); Center for Biotechnology and Biomedicine, Universität Leipzig, Deutscher Platz 5, Leipzig 04103 (Germany)

    2014-06-27

    Highlights: • We describe a novel probe for the sensitive detection of H{sub 2}O{sub 2}. • H{sub 2}O{sub 2} quenches the luminescence of a complex consisting of phthalic acid and terbium ions. • A stable fluorescence signal is generated immediately after mixing probe and sample. • The PATb probe detects H{sub 2}O{sub 2} over four orders of magnitude. - Abstract: Here, we present a fast and simple hydrogen peroxide assay that is based on time-resolved fluorescence. The emission intensity of a complex consisting of terbium ions (Tb{sup 3+}) and phthalic acid (PA) in HEPES buffer is quenched in the presence of H{sub 2}O{sub 2} and this quenching is concentration-dependent. The novel PATb assay detects hydrogen peroxide at a pH range from 7.5 to 8.5 and with a detection limit of 150 nmol L{sup −1} at pH 8.5. The total assay time is less than 1 min. The linear range of the assay can be adapted by a pH adjustment of the aqueous buffer and covers a concentration range from 310 nmol L{sup −1} to 2.56 mmol L{sup −1} in total which encompasses four orders of magnitude. The assay is compatible with high concentrations of all 47 tested inorganic and organic compounds. The PATb assay was applied to quantify H{sub 2}O{sub 2} in polluted river water samples. In conclusion, this fast and easy-to-use assay detects H{sub 2}O{sub 2} with high sensitivity and precision.

  13. Separation device of radio lanthanides (DISER); Dispositivo de separacion de radiolantanidos (DISER)

    Energy Technology Data Exchange (ETDEWEB)

    Vera T, A.L. [FES-Zaragoza, UNAM, 09000 Mexico D.F. (Mexico); Monroy G, F.; Vazquez M, J.C.; Jimenez B, F. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: veratrevino@hotmail.com

    2008-07-01

    At the present time the cancer is one of the main causes of mortality in our country, therefore, its prevention, diagnostic and treatment is of vital importance for those health systems. The treatment of the cancer and other illnesses, starting from monoclonal antibodies, peptides, macro aggregates or marked aminoacids with beta particles emitting radioisotopes, it is an extremely promising field. The radioactive lanthanides: Promethium 149, Terbium 161, Holmium 166 and Lutetium 177 are beta emitting ({beta}), which possess nuclear and chemical properties that have shown their feasibility like radioisotopes of radiotherapeutic use. However, these radioisotopes are not commercially available; to this respect, the Radioactive Materials Research Laboratory (LIMR) of the National Institute of Nuclear Research (ININ), it has developed the methodology of production of these radioisotopes and based on these works, there is designed, built and mounted the Radio lanthanides Separation Device (DISER) able to carry out the radioisotopes production in a routine way. This device is content in a cell that has an auxiliary air service, an extraction system and it is protected with a lead armor-plating of 10 cm. The DISER it is manual and easy of managing. The main function of this equipment is the radio lanthanides separation starting from the extractive chromatography by means of packed columns with a commercial resin (LnSPS) and recovered in the superior and inferior part by fiber glass. The DISER is composed by a main carrousel where the separation columns and the elution recipients are mounted. Also counts with an opening system of irradiation vials, port samples for columns and glass material. The present work presents a detailed description of the DISER, as well as its handling that allows to produce the radioisotopes Promethium-149, Terbium-161, Holmium-166 and Lutetium-177 starting from the separation of its parent elements Neodymium-149, Gadolinium-161, Dysprosium-166

  14. Improving green emission of Tb3+ions in BaO-B2O3-P2O5glasses by means of Al3+ions.

    Science.gov (United States)

    Kalpana, T; Gandhi, Y; Sudarsan, V; Piasecki, M; Ravi Kumar, V; Veeraiah, N

    2016-11-01

    BaO-B 2 O 3 -P 2 O 5 glasses doped with a fixed concentration of Tb 3 + ions and varying concentrations of Al 2 O 3 were synthesized, and the influence of the Al 3 + ion concentration on the luminescence efficiency of the green emission of Tb 3 + ions was investigated. The optical absorption, excitation, luminescence spectra and fluorescence decay curves of these glasses were recorded at ambient temperature. The emission spectra of terbium ions when excited at 393 nm exhibited two main groups of bands, corresponding to 5 D 3  →  7 F j (blue region) and 5 D 4  → 7F j (green region). From these spectra, the radiative parameters, viz., spontaneous emission probability A, total emission probability A T , radiative lifetime τ and fluorescent branching ratio β, of different transitions originating from the 5 D 4 level of Tb 3 + ions were evaluated based on the Judd-Ofelt theory. A clear increase in the quantum efficiency and luminescence of the green emission of Tb 3 + ions corresponding to 5 D 4  →  7 F 5 transition is observed with increases in the concentration of Al 2 O 3 up to 3.0 mol%. The improvement in emission is attributed to the de-clustering of terbium ions by Al 3 + ions and also to the possible admixing of wave functions of opposite parities. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  15. Synthesis and fabrication of Y{sub 2}O{sub 3}:Tb{sup 3+} and Y{sub 2}O{sub 3}:Eu{sup 3+} thin films for electroluminescent applications: Optical and structural characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Alarcón-Flores, G., E-mail: alar_fbeto@yahoo.com [Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada, IPN, Legaría 694, Irrigación, C.P. 11500, México D.F. (Mexico); García-Hipólito, M. [Instituto de Investigaciones en Materiales, UNAM, Apdo. Postal 70-360, Delegación Coyoacán, C.P. 04150, México D.F. (Mexico); Aguilar-Frutis, M. [Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada, IPN, Legaría 694, Irrigación, C.P. 11500, México D.F. (Mexico); Carmona-Téllez, S. [Instituto de Física, UNAM, Coyoacán, C.P. 04150, México D.F. (Mexico); Martinez-Martinez, R. [Universidad Tecnológica de la Mixteca, Carretera Acatlima Km 2.5, Huajuapan de León Oaxaca, C.P. 69000, México (Mexico); Campos-Arias, M.P. [Centro de Investigación en Ciencia Aplicada y Tecnología Avanzada, IPN, Legaría 694, Irrigación, C.P. 11500, México D.F. (Mexico); Zaleta-Alejandre, E. [Universidad Autónoma del Estado de Hidalgo-Escuela Superior de Apan, Carretera Apan-Calpulalpan Km. 8, C.P. 43920, Apan, Hidalgo (Mexico); and others

    2015-01-15

    Terbium, europium and yttrium β diketonates have been synthesized from acetylacetone and inorganic metal salts and used as precursors for the deposition of Tb{sup 3+} or Eu{sup 3+} doped Y{sub 2}O{sub 3} polycrystalline films by the ultrasonic spray pyrolysis technique. The films were deposited on c-Si substrates at temperatures in the 400–550 °C range. The optical and structural characterization of these films as a function of substrate temperature and Tb{sup 3+} and Eu{sup 3+} concentration was carried out by means of photoluminescence (PL), cathodoluminescence (CL), infrared (IR), ellipsometry, and UV–visible spectroscopy and atomic force microscopy (AFM), energy dispersive spectroscopy (EDS) and X ray diffraction (XRD) measurements respectively. The PL intensity from these films was found to depend on deposition temperature. Films deposited above 450 °C exhibited the characteristic PL peaks associated with either Tb{sup 3+} or Eu{sup 3+} intra electronic energy levels transitions. The most intense PL emission was found for dopant concentration of 10 at% for Tb{sup 3+} and at 8 at% for Eu{sup 3+} ions into precursor solution. In both cases concentration quenching of the PL emission was observed for concentrations above these values. The films had a refractive index (1.81), low average surface roughness (∼62 Å) and a UV–Vis. transmission of the order of 90 %T. - Highlights: • Terbium, europium and yttrium β diketonates have been synthesized. • Luminescent thin films of Y{sub 2}O{sub 3}:Tb{sup 3+} and Y{sub 2}O{sub 3}:Eu{sup 3+} were obtained. • Optical and structural characteristics of these thin films are presented. • The films had a refractive index (1.81) and low average surface roughness (∼62 Å)

  16. A novel tridentate bis(phosphinic acid)phosphine oxide based europium(III)-selective Nafion membrane luminescent sensor.

    Science.gov (United States)

    Sainz-Gonzalo, F J; Popovici, C; Casimiro, M; Raya-Barón, A; López-Ortiz, F; Fernández, I; Fernández-Sánchez, J F; Fernández-Gutiérrez, A

    2013-10-21

    A new europium(III) membrane luminescent sensor based on a new tridentate bis(phosphinic acid)phosphine oxide (3) system has been developed. The synthesis of this new ligand is described and its full characterization by NMR, IR and elemental analyses is provided. The luminescent complex formed between europium(III) chloride and ligand 3 was evaluated in solution, observing that its spectroscopic and chemical characteristics are excellent for measuring in polymer inclusion membranes. Included in a Nafion membrane, all the parameters (ligand and ionic additives) that can affect the sensitivity and selectivity of the sensing membrane as well as the instrumental conditions were carefully optimized. The best luminescence signal (λexc = 229.06 nm and λem = 616.02 nm) was exhibited by the sensing film having a Nafion : ligand composition of 262.3 : 0.6 mg mL(-1). The membrane sensor showed a short response time (t95 = 5.0 ± 0.2 min) and an optimum working pH of 5.0 (25 mM acetate buffer solution). The membrane sensor manifested a good selectivity toward europium(III) ions with respect to other trivalent metals (iron, chromium and aluminium) and lanthanide(III) ions (lanthanum, samarium, terbium and ytterbium), although a small positive interference of terbium(III) ions was observed. It provided a linear range from 1.9 × 10(-8) to 5.0 × 10(-6) M with a very low detection limit (5.8 × 10(-9) M) and sensitivity (8.57 × 10(-7) a.u. per M). The applicability of this sensing film has been demonstrated by analyzing different kinds of spiked water samples obtaining recovery percentages of 95-97%.

  17. Structure, stability, dynamics, high-field relaxivity and ternary-complex formation of a new tris(aquo) gadolinium complex.

    Science.gov (United States)

    Nonat, Aline; Fries, Pascal H; Pécaut, Jacques; Mazzanti, Marinella

    2007-01-01

    The tripodal hexadentate picolinate ligand dpaa3- (H3dpaa=N,N'-bis[(6-carboxypyridin-2-yl)methyl]glycine) has been synthesised. It can form 1:1 and 1:2 lanthanide/ligand complexes. The crystal structure of the bis(aquo) lutetium complex [Lu(dpaa)(H2O)2] has been determined by X-ray diffraction studies. The number of water molecules was determined by luminescence lifetime studies of the terbium and europium complexes. The tris(aquo) terbium complex shows a fairly high luminescence quantum yield (22 %). The [Gd(dpaa)(H2O)3] complex displays a high water solubility and an increased stability (pGd=12.3) with respect to the analogous bis(aquo) complex [Gd(tpaa)(H2O)2] (pGd=11.2). Potentiometric and relaxometric studies show the formation of a soluble GdIII hydroxo complex at high pH values. A unique aquohydroxo gadolinium complex has been isolated and its crystal structure determined. This complex crystallises as a 1D polymeric chain consisting of square-shaped tetrameric units. In heavy water, the [Gd(dpaa)-(D2O)3] complex shows a quite high HOD proton relaxivity at high field (11.93 s(-1) mM(-1) at 200 MHz and 298 K) because of the three inner-sphere water molecules. The formation of ternary complexes with physiological anions has been monitored by relaxometric studies, which indicate that even under conditions favourable to the formation of adducts with oxyanions, the mean relaxivity remains higher than those of most of the currently used commercial contrast agents except for the citrate. However, the measured relaxivity (r1=7.9 s(-1) mM(-1)) in a solution containing equimolar concentrations of [Gd(dpaa)(D2O)3] and citrate is still high. The interaction with albumin has been investigated by relaxometric and luminescence studies. Finally, a new versatile method to unravel the geometric and dynamic molecular factors that explain the high-field relaxivities has been developed. This approach uses a small, uncharged non-coordinating probe solute, the outer

  18. Synthesis of 5-Fluorouracil conjugated LaF{sub 3}:Tb{sup 3+}/PEG-COOH nanoparticles and its studies on the interaction with bovine serum albumin: spectroscopic approach

    Energy Technology Data Exchange (ETDEWEB)

    Mangaiyarkarasi, Rajendiran; Chinnathambi, Shanmugavel; Aruna, Prakasarao; Ganesan, Singaravelu, E-mail: sganesan@annauniv.edu, E-mail: ganesansingaravelu@gmail.com [Anna University, Department of Medical Physics (India)

    2015-03-15

    The luminescent lanthanide-doped nanoparticles have gathered considerable attention in many fields especially in biomedicine. In this work, the lanthanum fluoride-doped terbium nanoparticles (LaF{sub 3}:Tb{sup 3+} NPs) via simple chemical precipitation method has been synthesized and functionalized with polyethylene glycol. The size and the shape of the nanoparticles are confirmed using X-ray diffraction and transmission electron microscopy. The conjugation of 5-Fluorouracil (5-FU) and thus synthesized nanoparticles (NPs) were confirmed using various spectroscopic methods such as UV–Visible spectroscopy, fluorescence steady state, and excited state spectroscopy studies. The enhancement in fluorescence emission (λ = 543 nm) of drug-conjugated nanoparticles confirms the Vander Waals force of attraction due to F–F bonding between the drug and the nanoparticles. Further, the effects of 5FU-NPs in carrier protein were investigated using bovine serum albumin as a protein model. The 5FU–LaF{sub 3}:Tb{sup 3+} nanoparticles binding is illustrated with binding constant and number of binding sites. The structural change of bovine serum albumin has been studied using circular dichroism and Fourier transform infrared spectroscopy analysis.

  19. Preparation of photoluminescent PMMA doped with tris(pyrazol-1-yl)borate lanthanide complexes

    Energy Technology Data Exchange (ETDEWEB)

    Bortoluzzi, Marco, E-mail: markos@unive.it [Dipartimento di Scienze Molecolari e Nanosistemi, Universita Ca' Foscari di Venezia, Dorsoduro 2137, 30123 Venezia (Italy); Paolucci, Gino, E-mail: paolucci@unive.it [Dipartimento di Scienze Molecolari e Nanosistemi, Universita Ca' Foscari di Venezia, Dorsoduro 2137, 30123 Venezia (Italy); Gatto, Mattia; Roppa, Stefania [Dipartimento di Scienze Molecolari e Nanosistemi, Universita Ca' Foscari di Venezia, Dorsoduro 2137, 30123 Venezia (Italy); Enrichi, Francesco [CIVEN, Coordinamento Interuniversitario Veneto per le Nanotecnologie, Via delle Industrie 5, 30175 Marghera (Venezia) (Italy); Ciorba, Serena; Richards, Bryce S. [School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, EH14 4AS (United Kingdom)

    2012-09-15

    The neutral homoleptic Ln(III) complex Ln(Tp){sub 3} (Ln=Sm, Eu, Tb, Yb; Tp=hydrotris(pyrazol-1-yl)borate) were used as dopants for the preparation of novel photoluminescent poly(methyl methacrylate) glasses indicated as Ln(Tp){sub 3}-PMMA. The doped polymers containing samarium, europium and terbium derivatives showed emission associated to f-f transitions in the visible range upon excitation with UV light, while a NIR emission was obtained from Yb(Tp){sub 3}-PMMA. The maximum incident wavelength able to induce emissions from the Ln(Tp){sub 3}-doped polymers depends upon the choice of the lanthanide ion. No meaningful antenna-effect was instead observed using dysprosium as metal centre. - Highlights: Black-Right-Pointing-Pointer Polymers doped with photoluminescent lanthanide complexes. Black-Right-Pointing-Pointer Hydrotris(pyrazol-1-yl)borate (Tp) as antenna-ligand for Sm(III), Eu(III), Tb(III) and Yb(III). Black-Right-Pointing-Pointer Emission associated to f-f transitions upon excitation with UV light. Black-Right-Pointing-Pointer No antenna-effect for dysprosium derivative. Black-Right-Pointing-Pointer Photoluminescence excitation spectra are dependent upon the lanthanide ion.

  20. Synthesis and characterization of photoluminescent hybrids of poly( ɛ-caprolactone)-grafted-polyhedral oligosilsesquioxane by using a combination of ring-opening polymerization and click chemistry

    Science.gov (United States)

    Cao, Xuan Thang; Showkat, Ali Md; Bach, Long Giang; Jeong, Yeon Tae; Kim, Jong Soo; Lim, Kwon Taek; Gal, Yeong-Soon

    2015-01-01

    Photoluminescent hybrids of poly( ɛ-caprolactone) (PCL), polyhedral oligosilsesquioxane (POSS) and terbium ions (Tb3+) were synthesized by using a combination of ring-opening polymerization (ROP), click chemistry and coordination chemistry. Initially, acetylene functionalized PCL (alkyne-PCL-COOH) was prepared by using ROP of ɛ-caprolactone with propargyl alcohol, and azide-substituted POSS (POSS-N3) was prepared by using the reaction of chloropropyl-heptaisobutyl-substituted POSS with NaN3. The click reaction between alkyne-PCL-COOH and POSS-N3 afforded POSS-g-PCL, which was subsequently coordinated with Tb3+ ions in the presence of 1,10-phenanthroline to produce POSS-g-PCL-Tb3+-Phen. The structures and compositions of the hybrids were investigated by using 1H nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FT-IR), Field emission scanning electron microscope (FE-SEM), Transmission electron microscopy (TEM), and Thermogravimetric analysis (TGA). The optical properties of POSS-g-PCL-Tb3+-Phen complexes were characterized by using photoluminescence spectroscopy, which showed four high emission bands centered at 489, 545, 584, and 620 nm with excitation at 330 nm. The emission spectra of the europium-ion-coordinated hybrids, POSS-g-PCL-Eu3+-Phen, had four high-intensity peaks, 594, 617, 652 and 686 nm, for an excitation wavelength of 352 nm.

  1. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Elk City NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements

    Energy Technology Data Exchange (ETDEWEB)

    Broxton, D.E.; Beyth, M.

    1980-07-01

    Totals of 1580 water and 1720 sediment samples were collected from 1754 locations in the quadrangle. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters in Appendix I-A and for sediments in Appendix I-B. Uranium/thorium ratios for sediment samples are also included in Appendix I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 parts per billion (ppB) uranium were reanalyzed by delayed-neutron counting (DNC). A supplemental report containing the multielement analyses of water samples will be open filed in the near future. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, selenium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc, and zirconium. Basic statistics for 40 of these elements are presented. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  2. Compact fluorescent lamp phosphors in accidental radiation monitoring.

    Science.gov (United States)

    Murthy, K V R; Pallavi, S P; Ghildiyal, Rahul; Parmar, Manish C; Patel, Y S; Ravi Kumar, V; Sai Prasad, A S; Natarajan, V; Page, A G

    2006-01-01

    The application of lamp phosphors for accidental dosimetry is a new concept. Since the materials used in fluorescent lamps are good photo luminescent materials, if one can either use the inherent defects present in the phosphor or add suitable modifiers to induce thermoluminescence (TL) in these phosphors, then the device (fluorescent lamp) can be used as an accidental dosemeter. In continuation of our search for a suitable phosphor material, which can serve both as an efficient lamp phosphor and as a good radiation monitoring device, detailed examination has been carried out on cerium and terbium-doped lanthanum phosphate material. A (90)Sr beta source with 50 mCi strength (1.85 GBq) was used as the irradiation source for TL studies. The TL response as a function of dose received was examined for all phosphors used and it was observed that the intensity of the TL peak vs. dose received was a linear function in the dose range 0.1-200 Gy in each case. Incidentally LaPO(4): Ce,Tb is a component of the compact fluorescent lamp marketed recently as an energy bright light source. Besides having very good luminescence efficiency, good dosimetric properties of these phosphors render them useful for their use in accidental dosimetry also.

  3. Compensated bismuth-loaded plastic scintillators for neutron detection using low-energy pseudo-spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Dumazert, Jonathan, E-mail: jonathan.dumazert@cea.fr [CEA, LIST, Laboratoire Capteurs Architectures Electroniques, 91191 Gif-sur-Yvette (France); Coulon, Romain; Bertrand, Guillaume H.V.; Normand, Stéphane [CEA, LIST, Laboratoire Capteurs Architectures Electroniques, 91191 Gif-sur-Yvette (France); Méchin, Laurence [CNRS, UCBN, Groupe de Recherche en Informatique, Image, Automatique et Instrumentation de Caen, 14050 Caen (France); Hamel, Matthieu [CEA, LIST, Laboratoire Capteurs Architectures Electroniques, 91191 Gif-sur-Yvette (France)

    2016-05-21

    Gadolinium-covered modified plastic scintillators show a high potential for the deployment of cost-effective neutron detectors. Taking advantage of the low-energy photon and electron signature of thermal neutron captures in gadolinium-155 and gadolinium-157 however requires a background correction. In order to display a trustable rate, dual compensation schemes appear as an alternative to Pulse Shape Discrimination. This paper presents the application of such a compensation scheme to a two-bismuth loaded plastic scintillator system. A detection scintillator interacts with incident photon and fast neutron radiations and is covered with a gadolinium converter to become thermal neutron-sensitive as well. In the meantime, an identical compensation scintillator, covered with terbium, solely interacts with the photon and fast neutron part of incident radiations. After the acquisition and the treatment of the counting signals from both sensors, a hypothesis test determines whether the resulting count rate after subtraction falls into statistical fluctuations or provides a robust image of neutron activity. A laboratory prototype is tested under both photon and neutron radiations, allowing us to investigate the performance of the overall compensation system. The study reveals satisfactory results in terms of robustness to a cesium-137 background and in terms of sensitivity in presence of a californium-252 source.

  4. X-ray performance of a wafer-scale CMOS flat panel imager for applications in medical imaging and nondestructive testing

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Bo Kyung, E-mail: goldrain99@kaist.ac.kr [Advanced Medical Device Research Center, Korea Electrotechnology Research Institute, Ansan (Korea, Republic of); Jeon, Seongchae [Advanced Medical Device Research Center, Korea Electrotechnology Research Institute, Ansan (Korea, Republic of); Seo, Chang-Woo [Department of Radiological Science, Yonsei University, Gangwon-do 220-710 (Korea, Republic of)

    2016-09-21

    This paper presents a wafer-scale complementary metal-oxide semiconductor (CMOS)-based X-ray flat panel detector for medical imaging and nondestructive testing applications. In this study, our proposed X-ray CMOS flat panel imager has been fabricated by using a 0.35 µm 1-poly/4-metal CMOS process. The pixel size is 100 µm×100 µm and the pixel array format is 1200×1200 pixels, which provide a field-of-view (FOV) of 120mm×120 mm. The 14.3-bit extended counting analog-to digital converter (ADC) with built-in binning mode was used to reduce the area and simultaneously improve the image resolution. The different screens such as thallium-doped CsI (CsI:Tl) and terbium gadolinium oxysulfide (Gd{sub 2}O{sub 2}S:Tb) scintillators were used as conversion materials for X-rays to visible light photons. The X-ray imaging performance such as X-ray sensitivity as a function of X-ray exposure dose, spatial resolution, image lag and X-ray images of various objects were measured under practical medical and industrial application conditions. This paper results demonstrate that our prototype CMOS-based X-ray flat panel imager has the significant potential for medical imaging and non-destructive testing (NDT) applications with high-resolution and high speed rate.

  5. Synthesis, characterization and heterogeneous base catalysis of amino functionalized lanthanide metal-organic frameworks

    Science.gov (United States)

    Huang, Jinping; Li, Chunmei; Tao, Lingling; Zhu, Huilin; Hu, Gang

    2017-10-01

    Lanthanide metal-organic frameworks (Ln-MOFs) are featured by their tolerance to water and dense structure. In this work, an amine-functionalized Ln-MOF was facilely synthesized by coordination of terbium with 2-aminoterephthalic acid under the condition of microwave irradiation. The crystal structure was characterized by single crystal X-ray diffraction, FT-IR, Raman, TG-DTA and XPS analysis. The basic catalytic activity of the NH2-Tb-MOF was evaluated for Knoevenagel condensation and Henry reactions. Apart from the high activity and 100% selectivity to the condensation product, the NH2-Tb-MOF catalyst could be easily recycled and reused owing to the high stability of the MOF framework formed by coordination of Tb3+ with carboxylic groups. Remarkably, the NH2-Tb-MOF exhibited size-selective catalysis to substrates. For the small-sized reactants, it displayed comparable activity to the homogeneous catalyst of aniline owing to the high dispersion of NH2- active sites and the low diffusion limits. However, in the same reaction system, extremely poor activity in Knoevenagel condensation and Henry reaction for the bulky substrate 4-(tert-butyl) benzaldehyde was observed due to the both effects of substitute and inhibition of diffusion into the micropores. Crystal structure analysis provided a mechanistic evidence that the heterogeneous base catalysis arose from the amino groups densely distributed inside the micropores.

  6. A novel antiamoebic agent against Acanthamoeba sp. - A causative agent for eye keratitis infection

    Science.gov (United States)

    Kusrini, Eny; Hashim, Fatimah; Azmi, Wan Nor Nadhirah Wan Noor; Amin, Nakisah Mat; Estuningtyas, Ari

    2016-01-01

    The terbium trinitrate.trihydrate.18-crown ether-6, Tb(NO3)3(OH2)3.(18C6) complex has been characterized by elemental analysis, photoluminescence and single X-ray diffraction. The IC50 values were determined based on MTT assay while light and fluorescence microscopy imaging were employed to evaluate the cellular morphological changes. Alkaline comet assay was performed to analyze the DNA damage. The photoluminescence spectrum of the Tb complex excited at 325 nm displayed seven luminescence peaks corresponding to the 5D4 → 7F0, 1, 2, 3, 4, 5, 6 transitions. The cytotoxicity and genotoxicity studies indicated that the Tb(NO3)3(OH2)3.(18C6) complex and its salt form as well as the 18C6 molecule have excellent anti-amoebic activity with very low IC50 values are 7, 2.6 and 1.2 μg/mL, respectively, with significant decrease (p keratitis infection.

  7. Magnetocaloric properties of TbN, DyN and HoN nanopowders prepared by the plasma arc discharge method.

    Science.gov (United States)

    Shinde, K P; Jang, S H; Kim, J W; Kim, D S; Ranot, M; Chung, K C

    2015-12-21

    We report for the first time the synthesis of nanopowders of TbN, DyN and HoN crystallized in a cubic structure by the plasma arc discharge (PAD) method and investigate their magnetocaloric properties for magnetic refrigeration applications. The nitridization of terbium, dysprosium and holmium was obtained using a mixture of nitrogen and argon gas inside a discharge chamber with 4 kPa pressure. The structural and microstructural properties of these rare earth nitrides were investigated by using X-ray diffraction and transmission electron microscopy. The studied nitrides undergo a second-order ferromagnetic to paramagnetic phase transition at Curie temperatures of 35.7, 19.9 and 14.2 K for TbN, DyN and HoN, respectively. The magnetocaloric effects were estimated by calculating the magnetic entropy changes from the magnetization data sets measured at the different applied magnetic fields and temperatures. The changes in entropy -ΔSM were found to be 12.0, 13.6 and 24.5 J kg(-1) K(-1) at an applied magnetic field of 5 T.

  8. The inverse-trans-influence in tetravalent lanthanide and actinide bis(carbene) complexes

    Science.gov (United States)

    Gregson, Matthew; Lu, Erli; Mills, David P.; Tuna, Floriana; McInnes, Eric J. L.; Hennig, Christoph; Scheinost, Andreas C.; McMaster, Jonathan; Lewis, William; Blake, Alexander J.; Kerridge, Andrew; Liddle, Stephen T.

    2017-02-01

    Across the periodic table the trans-influence operates, whereby tightly bonded ligands selectively lengthen mutually trans metal-ligand bonds. Conversely, in high oxidation state actinide complexes the inverse-trans-influence operates, where normally cis strongly donating ligands instead reside trans and actually reinforce each other. However, because the inverse-trans-influence is restricted to high-valent actinyls and a few uranium(V/VI) complexes, it has had limited scope in an area with few unifying rules. Here we report tetravalent cerium, uranium and thorium bis(carbene) complexes with trans C=M=C cores where experimental and theoretical data suggest the presence of an inverse-trans-influence. Studies of hypothetical praseodymium(IV) and terbium(IV) analogues suggest the inverse-trans-influence may extend to these ions but it also diminishes significantly as the 4f orbitals are populated. This work suggests that the inverse-trans-influence may occur beyond high oxidation state 5f metals and hence could encompass mid-range oxidation state actinides and lanthanides. Thus, the inverse-trans-influence might be a more general f-block principle.

  9. The influence of interface on spin pumping effect in Ni80Fe20 /Tb bilayer

    Directory of Open Access Journals (Sweden)

    Jinjin Yue

    2016-05-01

    Full Text Available Focusing on the interface effect of the Ni80Fe20 (Py/terbium (Tb bilayer, the influence of interface on the magnetization dynamic damping is investigated systematically. Two series of Py (12 nm/Tb (d nm films with and without copper (Cu (1 nm interlayer are deposited on silicon (Si substrates by DC magnetron sputtering at room temperature. From vibrating sample magnetometer (VSM measurements, the saturation magnetization (Ms decreases with increasing Tb thickness in Py/Tb bilayer while the decrease of Ms is suppressed efficiently by inserting a Cu layer with even 1 nm of thickness. From the frequency dependence of ferromagnetic resonance (FMR linewidth, we can obtain the Gilbert damping coefficient (α, α is found to exhibit an extreme enhancement in comparison to the single Py layer and shows an increasing trend with increasing Tb thickness. By inserting the Cu layer, α decreases significantly. From theoretical fitting, the spin diffusion length (λSD and spin mixing conductance (g↑↓ are determined. It shows that the interface structure influences the spin mixing conductance but not the spin diffusion length.

  10. Elaboration, structural and spectroscopic properties of rare earth-doped yttrium-hafnium sol-gel oxide powders for scintillation applications

    Energy Technology Data Exchange (ETDEWEB)

    Villanueva-Ibanez, M.; Le Luyer, C.; Dujardin, C.; Mugnier, J

    2003-12-15

    Hafnium dioxide (HfO{sub 2}) presents a high crystalline density ({approx}10 g/cm{sup 3}) which makes it attractive for host lattice activated by rare earths (RE) for applications as scintillating materials. The potentiality to prepare Eu{sup 3+} and Tb{sup 3+} activated HfO{sub 2} sol-gel powders, with high scintillation yield, is explored. The powders are heat-treated at 1000 deg. C before analyses. The incorporation of yttrium (Y{sup 3+}) in various concentrations is conducted to vary the lattice phase and to stabilize the trivalent terbium ions. The influence of Y{sup 3+} on the microstructure and then on the scintillation properties of the material is presented. A high concentration of Y{sup 3+} (20 mol%) stabilizes pure HfO{sub 2} tetragonal phase whatever RE (1 mol%) doping. The powders with the highest relative scintillation yield are Eu{sup 3+}:HfO2 without Y{sup 3+} incorporation and crystallized into the monoclinic phase and Y{sup 3+} (20 mol%): Tb{sup 3+}:HfO2 crystallized into the tetragonal phase. Sequential energy transfer process is assumed to explain these results.

  11. Spore dipicolinic acid contents used for estimating the number of endospores in sediments.

    Science.gov (United States)

    Fichtel, Jörg; Köster, Jürgen; Rullkötter, Jürgen; Sass, Henrik

    2007-09-01

    Endospores are heat-resistant bacterial resting stages that can remain viable for long periods of time and may thus accumulate in sediments as a function of sediment age. The number of spores in sediments has only rarely been quantified, because of methodological problems, and consequently little is known about the quantitative contribution of endospores to the total number of prokaryotic cells. We here report on a protocol to determine the number of endospores in sediments and cultures. The method is based on the fluorimetric determination of dipicolinic acid (DPA), a spore core-specific compound, after reaction with terbium chloride. The concentration of DPA in natural samples is converted into endospore numbers using endospore-forming pure cultures as standards. Quenching of the fluorescence by sediment constituents and background fluorescence due to humic substances hampered direct determination of DPA in sediments. To overcome those interferences, DPA was extracted using ethyl acetate prior to fluorimetric measurements of DPA concentrations. The first results indicated that endospore numbers obtained with this method are orders of magnitude higher than numbers obtained by cultivation after pasteurization. In one of the explored sediment cores, endospores accounted for 3% of all stainable prokaryotic cells.

  12. Effects of scintillator on the detective quantum efficiency (DQE) of a digital imaging system.

    Science.gov (United States)

    Farman, Taeko T; Vandre, Robert H; Pajak, John C; Miller, Stuart R; Lempicki, Alex; Farman, Allan G

    2006-02-01

    To compare the effects of scintillator on the detective quantum efficiency (DQE) of a charge-coupled device (CCD) digital intraoral radiographic system. Three screens composed of 3 different scintillator materials, namely europium-doped lutetium oxide (Lu2(O3):Eu3+), transparent optical ceramic (TOC), thallium-doped cesium iodide (CsI:Tl; CsI), and terbium-doped gadolinium oxysulfide (Gd2(O2)S:Tb; GOS) were compared, in turn, in combination with a CCD detector having square pixels with height and width dimensions of 19.5 microm. DQE was investigated using the slanted-slit-derived MTF and surrogate signal-to-noise ratio (SNR) measurements derived from calculations of the mean and standard deviations from the mean pixel values of multiple random patches from various uniform exposures. An Irix x-ray generator operated at 70 kVp and 8 mA, with a nominal focal spot size of 0.7 mm and 2.5 mm Al equivalent filtration, was used in making all exposures. Using TOC, the peak DQE was 62% at 5 cycles/mm. For CsI, the peak DQE was 22% at 2 cycles/mm. With GOS, the peak DQE was 10% at 1 cycle/mm. Under identical experimental settings, TOC consistently resulted in higher DQE than CsI and commercially available GOS scintillators combined with the same high-resolution solid-state detector.

  13. Effects of scintillator on the modulation transfer function (MTF) of a digital imaging system.

    Science.gov (United States)

    Farman, Taeko T; Vandre, Robert H; Pajak, John C; Miller, Stuart R; Lempicki, Alex; Farman, Allan G

    2005-05-01

    To investigate the effects of 2 components (scintillator and x-ray generator) in the imaging chain on the modulation transfer function (MTF) of a charge-coupled device (CCD) digital intraoral radiographic system. Three screens composed of 3 different scintillator materials, namely europium-doped lutetium oxide transparent optical ceramic (TOC), thallium-doped cesium iodide (CsI), and terbium-doped gadolinium oxysulfide (GOS), were compared. Each was used, in turn, in conjunction with a CCD detector having a pixel dimension of 19.5 mum. Two different x-ray generators were also used to evaluate this variable. MTF was investigated using the slanted slit method. The TOC provided a good modulation response for low and middle frequencies, reducing to 0 only at a high cutoff frequency. With CsI and GOS, the system MTF dropped to 0 at a lower cutoff frequency than was the case with TOC. Hence, TOC provided higher spatial resolution than the other 2 scintillators tested under the experimental conditions applied. The differences in MTF attributed to the scintillator type were proportional and consistent. Despite constant pixel dimensions, MTF was affected to a considerable degree by the scintillator applied and the x-ray generator used in conjunction with the same CCD imaging device. TOC shows potential as a possible replacement for CsI and GOS as a scintillator screen material for intraoral digital x-ray imaging using a solid-state detector, providing higher spatial resolution under the given experimental conditions.

  14. Fabrication and imaging characterization of high sensitive CsI(Tl) and Gd{sub 2}O{sub 2}S(Tb) scintillator screens for X-ray imaging detectors

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Bo Kyung, E-mail: goldrain99@kaist.ac.k [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 335 Gwahangno, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Kim, Jong Yul [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 335 Gwahangno, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Kim, Tae Joo; Sim, Cheulmuu [Neutron Science Division, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of); Cho, Gyuseong [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 335 Gwahangno, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2010-03-15

    Indirect-detection methods consisted of an X-ray converter and photodiode arrays are more widely used in medical diagnosis and industrial fields. Two major scintillation materials such as terbium-doped gadolinium oxysulfide(Gd{sub 2}O{sub 2}S:Tb, Gadox) and thallium-doped cesium iodide(CsI:Tl) are commonly used. In this work, Gadox screens were manufactured by particle in binder (PIB) layer method and CsI:Tl scintillator films with columnar structure were also fabricated by thermal evaporation method onto glass substrates. Furthermore, two sample screens were coated to increase the light collection efficiency by white TiO{sub 2} reflective layers. The scintillation properties, such as emission spectrum and light output of these materials were measured by X-ray luminescence condition. In order to investigate the imaging performance of both Gadox and CsI:Tl scintillation screens as converters of X-ray imaging detectors, these materials were optically coupled with a 2D CCD image sensor. The light response to X-ray dose, spatial resolution and X-ray images were measured and analyzed under X-ray imaging system condition.

  15. Synthesis, Characterization and Electrochemical Sensing of Tb2O3 Nanotubes

    Science.gov (United States)

    Sabari Arul, N.; Vidya, J.; Ramya, V.; Mangalaraj, D.

    2017-02-01

    One dimensional terbium oxide (Tb2O3) nanotubes have been synthesized by using surfactant free precipitation method and investigated its non-enzymatic electrochemical detection for hydrogen peroxide (H2O2). The structural analysis and x-ray diffraction data confirmed the formation of cubic phase Tb2O3 in the synthesized Tb2O3 nanotubes. The optical property of the synthesized product was investigated by ultraviolet spectroscopy and photoluminescence (PL) studies. The PL spectrum of Tb2O3 nanotubes exhibited a strong green luminescence corresponding to 5D4 → 7F5 transition of Tb3+ ions. The non-enzymatic hydrogen peroxide (H2O2) sensing of Tb2O3 nanotubes/carbon paper modified electrodes in 1 M KCl electrolyte was carried out using cyclic voltammetry and amperometric ( i- t) analysis. The enhanced electrocatalytic behavior was observed for Tb2O3 nanotubes with an excellent sensitivity of 875 μA mM-1 cm-2, linear ranges of 0.5-5 mM and a low detection limit of 5 μM.

  16. Structural, magnetic and luminescent properties of lanthanide complexes with N-salicylideneglycine.

    Science.gov (United States)

    Vančo, Ján; Trávníček, Zdeněk; Kozák, Ondřej; Boča, Roman

    2015-04-28

    A series of anionic heavy lanthanide complexes, involving the N-salicylideneglycinato(2-) Schiff base ligand (salgly) and having the general formula K[Ln(salgly)₂(H₂O)₂]∙H₂O (1-6), where Ln stands for Gd, Tb, Dy, Ho, Er and Tm, was prepared using the one-pot template synthesis. The complexes were thoroughly characterized by elemental and Thermogravimetric/Differential Thermal Analyses (TG/DTA), Fourier Transform Infrared Spectroscopy (FT-IR), and photoluminescence spectroscopies, electrospray-ionization mass spectrometry, and their magnetic properties were studied by temperature-dependent dc magnetic measurements using the superconducting quantum interference device (SQUID). The X-ray structure of the terbium(III) complex (2), representing the unique structure between the lanthanide complexes of N-salicylideneamino acids, was determined. The results of spectral and structural studies revealed the isostructural nature of the prepared complexes, in which the lanthanide ion is octacoordinated by two O,N,O-donor salgly ligands and two aqua ligands. The analysis of magnetic data confirmed that the complexes behave as paramagnets obeying the Curie law. The results of photoluminescence spectral studies of the complexes showed the different origin in their luminescent properties between the solid state and solution. An antenna effect of the Schiff base ligand was observed in a powder form of the complex only, while it acts as a fluorophore in a solution.

  17. Lanthanide based dual-emission fluorescent probe for detection of mercury (II) in milk.

    Science.gov (United States)

    Tan, Hongliang; Li, Qian; Ma, Chanjiao; Song, Yonghai; Xu, Fugang; Chen, Shouhui; Wang, Li

    2015-01-15

    It is highly desirable to develop a simple and sensitive method for Hg(2+) detection because of the dangerous nature of Hg(2+). In this work, we prepared a dual-emission fluorescent probe for Hg(2+) detection by combining two lanthanide chelates with different emission wavelengths. Green-emitting terbium (Tb(3+)) chelates as reference signals were embedded into SiO2 nanoparticles and red-emitting europium (Eu(3+)) chelates as response units were covalently linked to the surface of silica shell. Upon the addition of Hg(2+), the fluorescence of Eu(3+) chelates can be selectively quenched, while the fluorescence of Tb(3+) chelates remained unchanged. As a kind of Hg(2+) nanosensor, the dual-emission fluorescent probe exhibited excellent selectivity to Hg(2+) and high sensitivity up to 7.07 nM detection limit. The Hg(2+) levels in drinking water and milk samples were determined by using the dual-emission fluorescent probe with satisfied recovery. Additionally, our probe has a long enough fluorescence lifetime, which can avoid the interference from autofluorescence of the biological samples. We envision that the proposed probe could find great potential applications for ultrasensitive time-resolved fluorometric assays and biomedical imaging in the future. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Chemiluminescence characterisation of the reaction system Tb(III)-amino acid-peroxynitrous acid

    Energy Technology Data Exchange (ETDEWEB)

    Kaczmarek, M. [Department of Rare Earths, Faculty of Chemistry, Adam Mickiewicz University, Grunwaldzka 6, 60-780 Poznan (Poland); Lis, S. [Department of Rare Earths, Faculty of Chemistry, Adam Mickiewicz University, Grunwaldzka 6, 60-780 Poznan (Poland)], E-mail: blis@amu.edu.pl

    2008-02-28

    Chemiluminescence of the reaction system tryptophan-hydrogen peroxide-nitrite-Tb(III)-H{sub 2}SO{sub 4} was used for the determination of tryptophan. The chemiluminescence intensity observed in the system tryptophan-hydrogen peroxide-nitrite-sulfuric acid, in the presence of Tb(III) ions was five times higher than that in a solution without Tb(III) ions. The chemiluminescence spectrum obtained for the system tryptophan-hydrogen peroxide-nitrite-sulfuric acid solution showed one band, with {lambda}{sub max} {approx} 520 nm, whereas in the presence of Tb(III) ions two bands with {lambda}{sub max} {approx} 520 nm and 550 nm were observed. The peak centered at {approx}550 nm, corresponding to the {sup 5}D{sub 4} {yields} {sup 7}F{sub 5} transition, which is typical for the Tb(III) ion. A linear dependence was found for the CL intensity versus the tryptophan concentration, in the range of 1.2 x 10{sup -7} to 1 x 10{sup -4} mol/l. Terbium(III) ions play the role of sensitizer in the reaction mixture tryptophan-hydrogen peroxide-nitrite-sulfuric acid.

  19. Structural, Magnetic and Luminescent Properties of Lanthanide Complexes with N-Salicylideneglycine

    Directory of Open Access Journals (Sweden)

    Ján Vančo

    2015-04-01

    Full Text Available A series of anionic heavy lanthanide complexes, involving the N-salicylideneglycinato(2- Schiff base ligand (salgly and having the general formula K[Ln(salgly2(H2O2]∙H2O (1–6, where Ln stands for Gd, Tb, Dy, Ho, Er and Tm, was prepared using the one-pot template synthesis. The complexes were thoroughly characterized by elemental and Thermogravimetric/Differential Thermal Analyses (TG/DTA, Fourier Transform Infrared Spectroscopy (FT-IR, and photoluminescence spectroscopies, electrospray-ionization mass spectrometry, and their magnetic properties were studied by temperature-dependent dc magnetic measurements using the superconducting quantum interference device (SQUID. The X-ray structure of the terbium(III complex (2, representing the unique structure between the lanthanide complexes of N-salicylideneamino acids, was determined. The results of spectral and structural studies revealed the isostructural nature of the prepared complexes, in which the lanthanide ion is octacoordinated by two O,N,O-donor salgly ligands and two aqua ligands. The analysis of magnetic data confirmed that the complexes behave as paramagnets obeying the Curie law. The results of photoluminescence spectral studies of the complexes showed the different origin in their luminescent properties between the solid state and solution. An antenna effect of the Schiff base ligand was observed in a powder form of the complex only, while it acts as a fluorophore in a solution.

  20. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Dubois NTMS Quadrangle, Idaho/Montana, including concentrations of forty-five additional elements

    Energy Technology Data Exchange (ETDEWEB)

    LaDelfe, C.M.

    1980-08-01

    Totals of 1024 water samples and 1600 sediment samples were collected from 1669 locations in the Dubois quadrangle. Water samples were taken at streams, springs, and wells; sediment samples were collected from streams and springs. All field and analytical data are presented for waters in Appendix I-A and for sediments in I-B. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than the upper detection limit of uranium were reanalyzed by delayed neutron counting. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, arsenic, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium rubidium, samarium, scandium, selenium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, zinc and zirconium. All sediments were analyzed for uranium by delayed-neutron counting. Other elemental concentrations in sediments were determined by neutron-activation analysis for 30 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million.

  1. Fluorescence and energy migration in Tb sup 3+ /Eu sup 3+ activated K sub 2 GdF sub 5. Fluorescence et processus de transfert dans K sub 2 GdF sub 5 : Tb sup 3+ ou Eu sup 3+

    Energy Technology Data Exchange (ETDEWEB)

    Mahiou, R.; Aamili, A.; Zambon, D.; Cousseins, J.C. (Clermont-Ferrand-2 Univ., 63 - Aubiere (FR) ENSCCF, 63 - Aubiere (FR))

    1990-01-01

    A study of the energy transfer process from gadolinium to terbium or europium in K{sub 2}GdF{sub 5} was performed for a 0-5% range of acceptor concentrations. From measurements of fluorescence decay times, the energy transfer efficiencies and probabilities were derived, At 300 K and 77 K, excitation into the Gd{sup 3+} ion results in mainly Tb{sup 3+} or Eu{sup 3+} emission. It is shown that the excitation energy migrates among the Gd{sup 3+} sublattice before to be transferred to the Tb{sup 3+} or Eu{sup 3+} acceptor. The energy levels involved in the energy transfer and the mechanism of the transfer are discussed. Our results suggest that the Gd{sup 3+} ({sup 6}P) {yields} Tb{sup 3+} energy transfer occurs by a dipole-dipole mechanism while an exchange interaction is more likely at the origin of the Gd{sup 3+} ({sup 6}P) {yields} Eu{sup 3+} energy transfer.

  2. Strategic Materials in the Automobile: A Comprehensive Assessment of Strategic and Minor Metals Use in Passenger Cars and Light Trucks.

    Science.gov (United States)

    Field, Frank R; Wallington, Timothy J; Everson, Mark; Kirchain, Randolph E

    2017-12-19

    A comprehensive component-level assessment of several strategic and minor metals (SaMMs), including copper, manganese, magnesium, nickel, tin, niobium, light rare earth elements (LREEs; lanthanum, cerium, praseodymium, neodymium, promethium, and samarium), cobalt, silver, tungsten, heavy rare earth elements (yttrium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, and lutetium), and gold, use in the 2013 model year Ford Fiesta, Focus, Fusion, and F-150 is presented. Representative material contents in cars and light-duty trucks are estimated using comprehensive, component-level data reported by suppliers. Statistical methods are used to accommodate possible errors within the database and provide estimate bounds. Results indicate that there is a high degree of variability in SaMM use and that SaMMs are concentrated in electrical, drivetrain, and suspension subsystems. Results suggest that trucks contain greater amounts of aluminum, nickel, niobium, and silver and significantly greater amounts of magnesium, manganese, gold, and LREEs. We find tin and tungsten use in automobiles to be 3-5 times higher than reported by previous studies which have focused on automotive electronics. Automotive use of strategic and minor metals is substantial, with 2013 vehicle production in the United States, Canada, EU15, and Japan alone accounting for approximately 20% of global production of Mg and Ta and approximately 5% of Al, Cu, and Sn. The data and analysis provide researchers, recyclers, and decision-makers additional insight into the vehicle content of strategic and minor metals of current interest.

  3. {μ-6,6′-Dimethoxy-2,2′-[ethane-1,2-diylbis(nitrilomethylidyne]diphenolato}-μ-nitrato-dinitratoterbium(IIIzinc(II

    Directory of Open Access Journals (Sweden)

    Li-Yang Yin

    2008-04-01

    Full Text Available In the title heteronuclear ZnII—TbIII complex (systematic name: {6,6′-dimethoxy-2,2′-[ethane-1,2-diylbis(nitrilomethylidyne]diphenolato-1κ4O6,O1,O1′,O6′}:2κ4O1,N,N′,O1′-μ-nitrato-1:2κ2O:O′-dinitrato-1κ4O,O′-terbium(IIIzinc(II, [TbZn(C18H18N2O4(NO33], with the hexadentate Schiff base compartmental ligand N,N′-bis(3-methoxysalicylideneethylenediamine (H2L, the Tb and Zn atoms are triply bridged by two phenolate O atoms of the Schiff base ligand and one nitrate ion. The five-coordinate Zn atom is in a square-pyramidal geometry with the donor centers of two imine N atoms, two phenolate O atoms and one of the bridging nitrate O atoms. The TbIII center has a ninefold coordination environment of O atoms, involving the phenolate O atoms, two methoxy O atoms, two O atoms from two nitrate ions and one from the bridging nitrate ion. Weak intermolecular C—H...O interactions generate a two-dimensional layer structure.

  4. Rare earth fluorescent nanoparticles for specific cancer cell targeting

    Energy Technology Data Exchange (ETDEWEB)

    Stefanakis, Dimitrios; Ghanotakis, Demetrios F., E-mail: ghanotakis@uoc.gr [University of Crete, Department of Chemistry (Greece)

    2016-07-15

    Terbium layered hydroxide nanoparticles (Tb{sub 2}(OH){sub 5}NO{sub 3}) were synthesized by a one-pot coprecipitation method. The characterization of this preparation revealed highly oriented fluorescent nanoparticles. An attempt to improve the properties of Tb{sub 2}(OH){sub 5}NO{sub 3} resulted in the preparation of two optimized nanoparticles. In particular, Tb{sub 2}(OH){sub 5}NO{sub 3}:Eu and Tb{sub 2}(OH){sub 5}NO{sub 3}-FA were prepared when Tb{sub 2}(OH){sub 5}NO{sub 3} was doped with Europium and when the surface was modified with folic acid (FA), respectively. The size of the above nanoparticles was below 100 nm, and thus they have the potential to be used for biomedical applications. The interaction of nanoparticles with human cells was studied using confocal microscopy. This study revealed that only the nanoparticles modified with folic acid have the ability to be targeted to HeLa cells. This specific identification of cancer cells, in combination with the fluorescent properties of Tb{sub 2}(OH){sub 5}NO{sub 3}, could render these nanoparticles appropriate for biomedical applications.

  5. Polarizers, optical bridges, and Sagnac interferometers for nanoradian polarization rotation measurements

    Science.gov (United States)

    Rowe, A. C. H.; Zhaksylykova, I.; Dilasser, G.; Lassailly, Y.; Peretti, J.

    2017-04-01

    The ability to measure nanoradian polarization rotations, θF, in the photon shot noise limit is investigated for partially crossed polarizers (PCP), a static Sagnac interferometer, and an optical bridge, each of which can in principle be used in this limit with near equivalent figures-of-merit (FOM). In practice a bridge to PCP/Sagnac source noise rejection ratio of 1 /4 θF2 enables the bridge to operate in the photon shot noise limit even at high light intensities. The superior performance of the bridge is illustrated via the measurement of a 3 nrad rotation arising from an axial magnetic field of 0.9 nT applied to a terbium gallium garnet. While the Sagnac is functionally equivalent to the PCP in terms of the FOM, unlike the PCP it is able to discriminate between rotations with different time (T) and parity (P) symmetries. The Sagnac geometry implemented here is similar to that used elsewhere to detect non-reciprocal (T ¯ P ) rotations like those due to the Faraday effect. Using a Jones' matrix approach, novel Sagnac geometries uniquely sensitive to non-reciprocal T P ¯ (e.g. magneto-electric or magneto-chiral) rotations, as well as to reciprocal rotations (e.g. due to linear birefringence, TP, or to chirality, T P ¯ ) are proposed.

  6. Giant onsite electronic entropy enhances the performance of ceria for water splitting.

    Science.gov (United States)

    Naghavi, S Shahab; Emery, Antoine A; Hansen, Heine A; Zhou, Fei; Ozolins, Vidvuds; Wolverton, Chris

    2017-08-18

    Previous studies have shown that a large solid-state entropy of reduction increases the thermodynamic efficiency of metal oxides, such as ceria, for two-step thermochemical water splitting cycles. In this context, the configurational entropy arising from oxygen off-stoichiometry in the oxide, has been the focus of most previous work. Here we report a different source of entropy, the onsite electronic configurational entropy, arising from coupling between orbital and spin angular momenta in lanthanide f orbitals. We find that onsite electronic configurational entropy is sizable in all lanthanides, and reaches a maximum value of ≈4.7 k B per oxygen vacancy for Ce 4+ /Ce 3+ reduction. This unique and large positive entropy source in ceria explains its excellent performance for high-temperature catalytic redox reactions such as water splitting. Our calculations also show that terbium dioxide has a high electronic entropy and thus could also be a potential candidate for solar thermochemical reactions.Solid-state entropy of reduction increases the thermodynamic efficiency of ceria for two-step thermochemical water splitting. Here, the authors report a large and different source of entropy, the onsite electronic configurational entropy arising from coupling between orbital and spin angular momenta in f orbitals.

  7. Phosphorescence quantum yield determination with time-gated fluorimeter and Tb(III)-acetylacetonate as luminescence reference

    Energy Technology Data Exchange (ETDEWEB)

    Penzkofer, A., E-mail: alfons.penzkofer@physik.uni-regensburg.de [Fakultät für Physik, Universität Regensburg, Universitätsstrasse 31, D-93053 Regensburg (Germany)

    2013-03-29

    Highlights: ► Procedure for absolute phosphorescence quantum yield measurement is described. ► Experimental setup for absolute luminescence quantum yield standard calibration. ► Tb(acac){sub 3} proposed as phosphorescence quantum yield reference standard. ► Luminescence quantum yield of Tb(acac){sub 3} in cyclohexane measured. ► Luminescence lifetime of Tb(acac){sub 3} in cyclohexane measured. - Abstract: Phosphorescence quantum yield measurements of fluorescent and phosphorescent samples require the use of time-gated fluorimeters in order to discriminate against the fluorescence contribution. As reference standard a non-fluorescent luminescent compound is needed for absolute phosphorescence quantum yield determination. For this purpose the luminescence behavior of the rare earth chelate terbium(III)-acetylacetonate (Tb(acac){sub 3}) was studied (determination of luminescence quantum yield and luminescence lifetime). The luminescence quantum yield of Tb(acac){sub 3} was determined by using an external light source and operating the fluorimeter in chemo/bioluminescence mode with a fluorescent dye (rhodamine 6G in methanol) as reference standard. A procedure is developed for absolute luminescence (phosphorescence) quantum yield determination of samples under investigation with a time-gated fluorimeter using a non-fluorescent luminescent compound of known luminescence quantum yield and luminescence lifetime.

  8. Effects of Annealing Temperature on Structure and Magnetic Properties of TbxY3−xFe5O12 (x=0.2 and 0.4 Thin Films

    Directory of Open Access Journals (Sweden)

    N. B. Ibrahim

    2012-01-01

    Full Text Available Terbium-substituted yttrium iron garnet (TbxY3−xFe5O12 (x=0.2 and 0.4 thin films have been successfully prepared by a sol-gel method followed by spin-coating process. The annealing of the films was performed at different temperatures like 700, 800, and 900°C and found that the films annealed at 900°C turned out to be crystallized into a pure garnet phase. All of the films were bearing grains of nanometer in size. Increasing the annealing temperature gave extra energy to the grains causing to be agglomerates. The lattice contraction occurred as the grain’s sizes were decreased due to the decrease of Fe2+ formation. The magnetic measurements show that all of the films are soft magnetic materials with low saturation magnetization values. The hysteresis loops of the films which were annealed at 900°C were found angular in shape similar to the single crystal-like YIG film.

  9. Magnetostrictive Vibration Damper and Energy Harvester for Rotating Machinery

    Science.gov (United States)

    Deng, Zhangxian; Asnani, Vivake M.; Dapino, Marcelo J.

    2015-01-01

    Vibrations generated by machine driveline components can cause excessive noise and structural damage. Magnetostrictive materials, including Galfenol (iron-gallium alloys) and Terfenol-D (terbium-iron-dysprosium alloys), are able to convert mechanical energy to magnetic energy. A magnetostrictive vibration ring is proposed, which generates electrical energy and dampens vibration, when installed in a machine driveline. A 2D axisymmetric finite element (FE) model incorporating magnetic, mechanical, and electrical dynamics is constructed in COMSOL Multiphysics. Based on the model, a parametric study considering magnetostrictive material geometry, pickup coil size, bias magnet strength, flux path design, and electrical load is conducted to maximize loss factor and average electrical output power. By connecting various resistive loads to the pickup coil, the maximum loss factors for Galfenol and Terfenol-D due to electrical energy loss are identified as 0.14 and 0.34, respectively. The maximum average electrical output power for Galfenol and Terfenol-D is 0.21 W and 0.58 W, respectively. The loss factors for Galfenol and Terfenol-D are increased to 0.59 and 1.83, respectively, by using an L-C resonant circuit.

  10. Lanthanide complexes as luminogenic probes to measure sulfide levels in industrial samples

    Energy Technology Data Exchange (ETDEWEB)

    Thorson, Megan K. [Department of Medicinal Chemistry, University of Utah College of Pharmacy, Salt Lake City, UT 84108 (United States); Ung, Phuc [Monash Institute of Pharmaceutical Sciences, Monash University, Victoria 3052 (Australia); Leaver, Franklin M. [Water & Energy Systems Technology, Inc., Kaysville, UT 84037 (United States); Corbin, Teresa S. [Quality Services Laboratory, Tesoro Refining and Marketing, Salt Lake City, UT 84103 (United States); Tuck, Kellie L., E-mail: kellie.tuck@monash.edu [School of Chemistry, Monash University, Victoria 3800 (Australia); Graham, Bim, E-mail: bim.graham@monash.edu [Monash Institute of Pharmaceutical Sciences, Monash University, Victoria 3052 (Australia); Barrios, Amy M., E-mail: amy.barrios@utah.edu [Department of Medicinal Chemistry, University of Utah College of Pharmacy, Salt Lake City, UT 84108 (United States)

    2015-10-08

    A series of lanthanide-based, azide-appended complexes were investigated as hydrogen sulfide-sensitive probes. Europium complex 1 and Tb complex 3 both displayed a sulfide-dependent increase in luminescence, while Tb complex 2 displayed a decrease in luminescence upon exposure to NaHS. The utility of the complexes for monitoring sulfide levels in industrial oil and water samples was investigated. Complex 3 provided a sensitive measure of sulfide levels in petrochemical water samples (detection limit ∼ 250 nM), while complex 1 was capable of monitoring μM levels of sulfide in partially refined crude oil. - Highlights: • Lanthanide–azide based sulfide sensors were synthesized and characterized. • The probes have excitation and emission profiles compatible with sulfide-contaminated samples from the petrochemical industry. • A terbium-based probe was used to measure the sulfide concentration in oil refinery wastewater. • A europium-based probe had compatibility with partially refined crude oil samples.

  11. MICROBIALLY MEDIATED LEACHING OF RARE EARTH ELEMENTS FROM RECYCLABLE MATERIALS

    Energy Technology Data Exchange (ETDEWEB)

    Reed, D. W.; Fujita, Y.; Daubaras, D. L.; Bruhn, D. F.; Reiss, J. H.; Thompson, V. S.; Jiao, Y.

    2016-09-01

    Bioleaching offers a potential approach for recovery of rare earth elements (REE) from recyclable materials, such as fluorescent lamp phosphors or degraded industrial catalysts. Microorganisms were enriched from REE-containing ores and recyclable materials with the goal of identifying strains capable of extracting REE from solid materials. Over 100 heterotrophic microorganisms were isolated and screened for their ability to produce organic acids capable of leaching REE. The ten most promising isolates were most closely related to Pseudomonas, Acinetobacter and Talaromyces. Of the acids produced, gluconic acid appeared to be the most effective at leaching REE (yttrium, lanthanum, cerium, europium, and terbium) from retorted phosphor powders (RPP), fluidized cracking catalyst (FCC), and europium-doped yttrium oxide (YOEu). We found that an Acinetobacter isolates, BH1, was the most capable strain and able to leach 33% of the total REE content from the FCC material. These results support the continuing evaluation of gluconic acid-producing microbes for large-scale REE recovery from recyclable materials.

  12. Re-thinking the role of radiometal isotopes: Towards a future concept for theranostic radiopharmaceuticals.

    Science.gov (United States)

    Notni, Johannes; Wester, Hans-Jürgen

    2017-11-16

    The potential and future role of certain metal radionuclides, for example, 44 Sc, 89 Zr, 86 Y, 64 Cu, 68 Ga, 177 Lu, 225 Ac, and 213 Bi, and several terbium isotopes has been controversially discussed in the past decades. Furthermore, the possible benefits of "matched pairs" of isotopes for tandem applications of diagnostics and therapeutics (theranostics) have been emphasized, while such approaches still have not made their way into routine clinical practice. Analysis of bibliographical data illustrates how popularity of certain nuclides has been promoted by cycles of availability and applications. We furthermore discuss the different practical requirements for diagnostic and therapeutic radiopharmaceuticals and the resulting consequences for efficient development of clinically useful pairs of radionuclide theranostics, with particular emphasis on the underlying economical factors. Based on an exemplary assessment of overall production costs for 68 Ga and 18 F radiopharmaceuticals, we venture a look into the future of theranostics and predict that high-throughput PET applications, that is, diagnosis of frequent conditions, will ultimately rely on 18 F tracers. PET radiometals will occupy a niche in the clinical low-throughput sector (diagnosis of rare diseases), but above all, dominate preclinical research and clinical translation. Matched isotope pairs will be of lesser relevance for theranostics but may become important for future PET-based therapeutic dosimetry. Copyright © 2017 John Wiley & Sons, Ltd.

  13. Investigation Study on Gamma Ray Imaging Technology for Nuclear Power Plant Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Guk; Jeong, Woo Tae [Machinery and Materials Laboratory, Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2014-10-15

    The gamma ray imaging system provides an estimated dose-rate of the source at 30 cm above. The gamma detector is a terbium activated glass scintillator. The system is capable of producing a color two dimensional image of a radiation field superimposed on a black and white visual image. The system used in US power plants consists of a portable sensor head that contains both gamma ray and visual imaging systems and a portable control computer. The gamma ray imaging system has been successfully used as an ALARA tool for identifying source terms and determining the adequacy of existing shielding. Because the control system can be positioned away from the camera, the radiation exposure to personnel can be reduced without extensive shielding requirements. The gamma ray imaging system has been used to date in the decommissioning of Maine Yankee, Big Rock point,Trojan, San Onofre1, and Millstone 1. The equipment has also been used at normal refueling outages at a number of commercial nuclear power plants and at several Department of Energy Decommissioning sites. This paper is intended to review the applicability of gamma ray imaging system as decommissioning tool. In order to review the actual applicability, we are going to introduce applications for US power plants.

  14. One-dimensional simulation of lanthanide isotachophoresis using COMSOL.

    Science.gov (United States)

    Dixon, Derek R; Clark, Sue B; Ivory, Cornelius F

    2012-03-01

    Electrokinetic separations can be used to quickly separate rare earth metals to determine their forensic signature. In this work, we simulate the concentration and separation of trivalent lanthanide cations by isotachophoresis. A one-dimensional simulation is developed using COMSOL v4.0a, a commercial finite element simulator, to represent the isotachophoretic separation of three lanthanides: lanthanum, terbium, and lutetium. The binding ligand chosen for complexation with the lanthanides is α-hydroxyisobutyric acid (HIBA) and the buffer system includes acetate, which also complexes with the lanthanides. The complexes formed between the three lanthanides, HIBA, and acetate are all considered in the simulation. We observe that the presence of only lanthanide:HIBA complexes in a buffer system with 10 mM HIBA causes the slowest lanthanide peak (lutetium) to split from the other analytes. The addition of lanthanide:acetate complexes into the simulation of the same buffer system eliminates this splitting. Decreasing the concentration of HIBA in the buffer to 7 mM causes the analyte stack to migrate faster through the capillary. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Fluorescence dynamics of Tb 3+ and Tb 3+/Ho 3+ doped phosphate glasses

    Science.gov (United States)

    Rai, S.; Hazarika, S.

    2008-05-01

    UV absorption and fluorescence analysis of Tb 3+ in phosphate glass is carried out by Judd-Ofelt method with emphasis on the 5D→7F lasing transition. Branching ratios, peak emission cross-sections for 5D→7( level of Tb 3+ are calculated using Judd-Ofelt intensity parameters. Furthermore, fluorescence dynamics of the 5D level of Tb 3+ ion in phosphate glasses co-doped with Ho 3+ were experimentally investigated with classical Forster-Dexter model for direct cross-relaxation type energy transfer between Tb 3+ (donor) and Ho 3+ (acceptor). The energy transfer rates between Tb 3+ and Ho 3+ in phosphate glasses were calculated on the basis of experimental measurements. These measurements were performed for 1 wt.% of Tb 3+ and Ho 3+ concentration ranging from 0 to 3 wt.%. The results show that energy transfer occurs between the 5D 4 terbium and 5F 3 holmium levels and is a phonon-assisted dipole-dipole interaction.

  16. High fluorescence emission of carboxylic acid functionalized polystyrene/BaTiO{sub 3} nanocomposites and rare earth metal complexes: Preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Cao, X. T.; Showkat, A. M.; Wang, Z.; Lim, K. T., E-mail: ktlim@pknu.ac.kr [Department of Imaging System Engineering, Pukyong National University, Busan 608-737 (Korea, Republic of)

    2015-03-30

    Noble fluorescence nanocomposite compound based on barium titanate nanoparticles (BTO), polystyrene (PSt), and terbium ion (Tb{sup 3+}) was synthesized by a combination of surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization, Friedel-Crafts alkylation reaction and coordinate chemistry. Initially, a modification of surface of BTO was conducted by an exchange process with S-benzyl S’-trimethoxysilylpropyltrithiocarbonate to create macro-initiator for polymerization of styrene. Subsequently, aryl carboxylic acid functionalized polystyrene grafted barium titanate (BTO-g-PSt-COOH) was generated by substitution reaction between 4-(Chloromethyl) benzoic acid and PSt chains. The coordination of the nanohybrids with Tb{sup 3+} ions afforded fluorescent Tb{sup 3+} tagged aryl carboxylic acid functionalized polystyrene grafted barium titanate (BTO-g-PSt-Tb{sup 3+}) complexes. Structure, morphology, and fluorescence properties of nanohybrid complexes were investigated by respective physical and spectral studies. FT-IR and SEM analyses confirmed the formation of BTO-g-PSt-Tb{sup 3+}nanohybrids. Furthermore, TGA profiles demonstrated the grafting of aryl carboxylic acid functionalized polystyrene on BTO surface. Optical properties of BTO-g-PSt-Tb{sup 3+} complexes were investigated by fluorescence spectroscopy.

  17. Practical Implementation, Characterization and Applications of a Multi-Colour Time-Gated Luminescence Microscope

    Science.gov (United States)

    Zhang, Lixin; Zheng, Xianlin; Deng, Wei; Lu, Yiqing; Lechevallier, Severine; Ye, Zhiqiang; Goldys, Ewa M.; Dawes, Judith M.; Piper, James A.; Yuan, Jingli; Verelst, Marc; Jin, Dayong

    2014-10-01

    Time-gated luminescence microscopy using long-lifetime molecular probes can effectively eliminate autofluorescence to enable high contrast imaging. Here we investigate a new strategy of time-gated imaging for simultaneous visualisation of multiple species of microorganisms stained with long-lived complexes under low-background conditions. This is realized by imaging two pathogenic organisms (Giardia lamblia stained with a red europium probe and Cryptosporidium parvum with a green terbium probe) at UV wavelengths (320-400 nm) through synchronization of a flash lamp with high repetition rate (1 kHz) to a robust time-gating detection unit. This approach provides four times enhancement in signal-to-background ratio over non-time-gated imaging, while the average signal intensity also increases six-fold compared with that under UV LED excitation. The high sensitivity is further confirmed by imaging the single europium-doped Y2O2S nanocrystals (150 nm). We report technical details regarding the time-gating detection unit and demonstrate its compatibility with commercial epi-fluorescence microscopes, providing a valuable and convenient addition to standard laboratory equipment.

  18. Rare earth elements and hypertension risk among housewives: A pilot study in Shanxi Province, China.

    Science.gov (United States)

    Wang, Bin; Yan, Lailai; Huo, Wenhua; Lu, Qun; Cheng, Zixi; Zhang, Jingxu; Li, Zhiwen

    2017-01-01

    Studies have shown that residents living near rare earth mining areas have high concentrations of rare earth elements (REEs) in their hair. However, the adverse effects of REEs on human health have rarely been the focus of epidemiological studies. The goal of this study was to evaluate the relationship between REEs in hair and the risk of hypertension in housewives. We recruited 398 housewives in Shanxi Province, China, consisting of 163 women with hypertension (cases) and 235 healthy women without hypertension (controls). We analyzed 15 REEs (lanthanum (La), samarium (Sm), europium (Eu), gadolinium (Gd), terbium (Tb), dysprosium (Dy), holmium (Ho), erbium (Er), thulium (Tm), ytterbium (Yb), lutetium (Lu), Yttrium (Y), cerium (Ce), praseodymium (Pr), and neodymium (Nd)) and calcium (Ca) accumulated in housewives hair over a period of two years. The results revealed that, with the exception of Eu, concentrations of the REEs in hair were higher in the cases than in the controls. The univariate odds ratios (ORs) of the 14 REEs were >1, and four of the REEs (Dy, Tm, Yb, and Y) also had adjusted ORs > 1. The increasing dose-response trends of the four REEs further indicated the potential for increased hypertension risk. Moreover, the REEs were negatively correlated with Ca content in hair. These results might suggest an antagonistic effect of REEs on Ca in the human body. It was concluded that high intake of REEs might increase the risk of hypertension among housewives. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Magnetic and Magnetoelectric Properties of Rare Earth Molybdates

    Directory of Open Access Journals (Sweden)

    B. K. Ponomarev

    2012-01-01

    Full Text Available We present results on ferroelectric, magnetic, magneto-optical properties and magnetoelectric effect of rare earth molybdates (gadolinium molybdate, GMO, and terbium molybdate, TMO, and samarium molybdate, SMO, belonging to a new type of ferroelectrics predicted by Levanyuk and Sannikov. While cooling the tetragonal β-phase becomes unstable with respect to two degenerate modes of lattice vibrations. The β-β′ transition is induced by this instability. The spontaneous polarization appears as a by-product of the lattice transformation. The electric order in TMO is of antiferroelectric type. Ferroelectric and ferroelastic GMO and TMO at room temperature are paramagnets. At low temperatures GMO and TMO are antiferromagnetic with the Neel temperatures TN=0.3 K (GMO and TN=0.45 K (TMO. TMO shows the spontaneous destruction at 40 kOe magnetic field. Temperature and field dependences of the magnetization in TMO are well described by the magnetism theory of singlets at 4.2 K ≤ T ≤ 30 K. The magnetoelectric effect in SMO, GMO and TMO, the anisotropy of magnetoelectric effect in TMO at T = (1.8–4.2 K, the Zeeman effect in TMO, the inversion of the electric polarization induced by the laser beam are discussed. The correlation between the magnetic moment of rare earth ion and the magnetoelectric effect value is predicted. The giant fluctuations of the acoustic resonance peak intensity near the Curie point are observed.

  20. Influence of Tb3+ concentration on the optical properties and Verdet constant of magneto-optic ABS-PZZ glass

    Science.gov (United States)

    Ding, Jingxin; Man, Peiwen; Chen, Qinming; Guo, Li; Hu, Xin; Xiao, Yunyun; Su, Liangbi; Wu, Anhua; Zhou, Yanyan; Zeng, Fanming

    2017-07-01

    Highly transparent magneto-optical (MO) glasses (heavily xTb-doped SiO2-B2O3-P2O5-ZnO-ZrO, x = 15, 25, 32, 35, 40 mol%) were prepared by high temperature melting-quenching technique. The optical and magnetooptical properties have been measured at room temperature. The infrared transmission spectra and XRD confirms that [BO4], [BO3], [SiO4], [PO4], [BPO4] units the glass structure without crystallization by accommodating more Tb ions. The typical absorption bands could be observed in the UV-vis transmission spectra ascribing to 5d-4f electronic transition of Tb3+ and the absorption edges shift to a longer wavelength by increasing the Terbium ions content. The intensity of the emission peaks and decay time which is in the order of milliseconds decreases caused by concentration quenching. The cross-relaxation is responsible for the luminescence gradually disappearing of 5D3. The highest Verdet constant of the prepared glasses at room temperature @632.8 nm is -136.648 rad/T/m and the contribution V/N of each ion Tb is proportional to mole volume.

  1. The inverse-trans-influence in tetravalent lanthanide and actinide bis(carbene) complexes.

    Science.gov (United States)

    Gregson, Matthew; Lu, Erli; Mills, David P; Tuna, Floriana; McInnes, Eric J L; Hennig, Christoph; Scheinost, Andreas C; McMaster, Jonathan; Lewis, William; Blake, Alexander J; Kerridge, Andrew; Liddle, Stephen T

    2017-02-03

    Across the periodic table the trans-influence operates, whereby tightly bonded ligands selectively lengthen mutually trans metal-ligand bonds. Conversely, in high oxidation state actinide complexes the inverse-trans-influence operates, where normally cis strongly donating ligands instead reside trans and actually reinforce each other. However, because the inverse-trans-influence is restricted to high-valent actinyls and a few uranium(V/VI) complexes, it has had limited scope in an area with few unifying rules. Here we report tetravalent cerium, uranium and thorium bis(carbene) complexes with trans C=M=C cores where experimental and theoretical data suggest the presence of an inverse-trans-influence. Studies of hypothetical praseodymium(IV) and terbium(IV) analogues suggest the inverse-trans-influence may extend to these ions but it also diminishes significantly as the 4f orbitals are populated. This work suggests that the inverse-trans-influence may occur beyond high oxidation state 5f metals and hence could encompass mid-range oxidation state actinides and lanthanides. Thus, the inverse-trans-influence might be a more general f-block principle.

  2. Sensitized luminescence through nanoscopic effects of ZnO encapsulated in SiO{sub 2}:Tb{sup 3+} sol gel derived phosphor

    Energy Technology Data Exchange (ETDEWEB)

    Dhlamini, M.S., E-mail: mdhlamini@csir.co.z [National Center for Nanostructured Materials (NCNSM), CSIR (South Africa); Physics Department, University of the Free State, PO Box 339, Bloemfontein ZA9300 (South Africa); Ntwaeaborwa, O.M., E-mail: ntwaeab.sci@ufs.ac.z [Physics Department, University of the Free State, PO Box 339, Bloemfontein ZA9300 (South Africa); Swart, H.C. [Physics Department, University of the Free State, PO Box 339, Bloemfontein ZA9300 (South Africa); Ngaruiya, J.M. [Physics Department, University of the Free State, PO Box 339, Bloemfontein ZA9300 (South Africa); Department of Physics, Jomo Kenyatta Uniiversity of Agriculture and Technology, PO Box 62000, 00200 Nairobi (Kenya); Hillie, K.T. [National Center for Nanostructured Materials (NCNSM), CSIR (South Africa); Physics Department, University of the Free State, PO Box 339, Bloemfontein ZA9300 (South Africa)

    2009-12-01

    Terbium (1 mol%) doped ZnO-SiO{sub 2} binary system was prepared by a sol-gel process. Nanoscopic effects of ZnO on the photoluminescence (PL) and the cathodoluminescence (CL) properties were studied. Defects emission from ZnO nanoparticles was measured at 560 nm and the line emission from Tb{sup 3+} ions in SiO{sub 2}:Tb{sup 3+} and ZnO-SiO{sub 2}:Tb{sup 3+} with a major peak at 542 nm was measured. The PL excitation wavelength for 542 nm Tb{sup 3+} emission was measured at approx320 nm in both SiO{sub 2}:Tb{sup 3+} and ZnO-SiO{sub 2}:Tb{sup 3+}. The CL data showed quenched luminescence of the ZnO nanoparticles at 560 nm from a composite of ZnO-SiO{sub 2}:Tb{sup 3+} and a subsequent increase in 542 nm emission from the Tb{sup 3+} ions. This suggests that energy was transferred from the ZnO nanoparticles to enhance the green emission of the Tb{sup 3+} ions. The PL and CL properties of ZnO-SiO{sub 2}:Tb{sup 3+} binary system and possible mechanism for energy transfer from the ZnO nanoparticles to Tb{sup 3+} ions are discussed.

  3. Stimulus Response of Au-NPs@GMP-Tb Core-Shell Nanoparticles: Toward Colorimetric and Fluorescent Dual-Mode Sensing of Alkaline Phosphatase Activity in Algal Blooms of a Freshwater Lake.

    Science.gov (United States)

    Zhang, Xiaolei; Deng, Jingjing; Xue, Yumeng; Shi, Guoyue; Zhou, Tianshu

    2016-01-19

    In this study, we demonstrate a colorimetric and fluorescent dual-mode method for alkaline phosphatase activity (APA) sensing in freshwater lake with stimuli-responsive gold nanoparticles@terbium-guanosine monophosphate (Au-NPs@GMP-Tb) core-shell nanoparticles. Initially, the core-shell nanoparticles were fabricated based on Au-NPs decorated with a fluorescent GMP-Tb shell. Upon being excited at 290 nm, the as-formed Au-NPs@GMP-Tb core-shell nanoparticles emit green fluorescence, and the decorated GMP-Tb shell causes the aggregation of Au-NPs. However, the addition of ALP destroys GMP-Tb shell, resulting in the release of Au-NPs from the shell into the solvent. As a consequence, the aggregated Au-NPs solubilizes with the changes in the UV-vis spectrum of the dispersion, and in the meantime, the fluorescence of GMP-Tb shell turns off, which constitutes a new mechanism for colorimetric and fluorescent dual-mode sensing of APA. With the method developed here, we could monitor the dynamic change of APA during an algal bloom of a freshwater lake, both by the naked eye and further confirmed by fluorometric determination. This study not only offers a new method for on-site visible detection of APA but also provides a strategy for dual-mode sensing mechanisms by the rational design of the excellent optical properties of Au-NPs and the adaptive inclusion properties of the luminescent infinite coordination polymers.

  4. Infrared study of lattice dynamics and spin-phonon and electron-phonon interactions in multiferroic TbF e3(BO3) 4 and GdF e3(BO3) 4

    Science.gov (United States)

    Klimin, S. A.; Kuzmenko, A. B.; Kashchenko, M. A.; Popova, M. N.

    2016-02-01

    We present a comparative far-infrared reflection spectroscopy study of phonons, phase transitions, spin-phonon, and electron-phonon interactions in isostructural multiferroic iron borates of gadolinium and terbium. The behavior of phonon modes registered in a wide temperature range is consistent with a weak first-order structural phase transition [Ts=143 for GdF e3(BO3) 4 and 200 K for TbF e3(BO3) 4 ] from a high-symmetry high-temperature R 32 structure into a low-symmetry low-temperature P 3121 one. The temperature dependences of frequencies, oscillator strengths, and damping constants of some low-frequency modes reveal an appreciable lattice anharmonicity. Peculiarities in the phonon mode behavior in both compounds at the temperature of an antiferromagnetic ordering [TN=32 K for GdF e3(BO3) 4 and 40 K for TbF e3(BO3) 4 ] evidence the spin-phonon interaction. In the energy range of phonons, GdF e3(BO3) 4 has no electronic levels, but TbF e3(BO3) 4 possesses several. We observe an onset of new bands in the excitation spectrum of TbF e3(BO3) 4 due to a resonance interaction between a lattice phonon and 4 f electronic crystal-field (CF) excitations of T b3 + . This interaction causes delocalization of the CF excitations, their Davydov splitting, and formation of coupled electron-phonon modes.

  5. Scarcity of rare earth elements.

    Science.gov (United States)

    de Boer, M A; Lammertsma, K

    2013-11-01

    Rare earth elements (REEs) are important for green and a large variety of high-tech technologies and are, therefore, in high demand. As a result, supply with REEs is likely to be disrupted (the degree of depends on the REE) in the near future. The 17 REEs are divided into heavy and light REEs. Other critical elements besides REEs, identified by the European Commission, are also becoming less easily available. Although there is no deficiency in the earth's crust of rare earth oxides, the economic accessibility is limited. The increased demand for REEs, the decreasing export from China, and geopolitical concerns on availability contributed to the (re)opening of mines in Australia and the USA and other mines are slow to follow. As a result, short supply of particularly terbium, dysprosium, praseodymium, and neodymium is expected to be problematic for at least the short term, also because they cannot be substituted. Recycling REEs from electronic waste would be a solution, but so far there are hardly any established REE recycling methods. Decreasing the dependency on REEs, for example, by identifying possible replacements or increasing their efficient use, represents another possibility. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Heterometallic trinuclear {CoLn(III)} (Ln = Gd, Tb, Ho and Er) complexes in a bent geometry. Field-induced single-ion magnetic behavior of the Er(III) and Tb(III) analogues.

    Science.gov (United States)

    Goura, Joydeb; Brambleby, Jamie; Topping, Craig V; Goddard, Paul A; Suriya Narayanan, Ramakirushnan; Bar, Arun Kumar; Chandrasekhar, Vadapalli

    2016-05-31

    Through the use of a multi-site compartmental ligand, 2-methoxy-6-[{2-(2-hydroxyethylamino)ethylimino}methyl]phenol (LH3), the family of heterometallic, trinuclear complexes of the formula [CoLn(L)2(μ-O2CCH3)2(H2O)3]·NO3·xMeOH·yH2O has been expanded beyond Ln = Dy(III) to include Gd(III) (), Tb(III) (), Ho(III) () and Er(III) () for , and (x = 1; y = 1) and for (x = 0; y = 2). The metallic core of these complexes consists of a (Co(III)-Ln(III)-Co(III)) motif bridged in a bent geometry resulting in six-coordinated distorted Co(III) octahedra and nine-coordinated Ln(III) monocapped square-antiprisms. The magnetic characterization of these compounds reveals the erbium and terbium analogues to display a field induced single-ion magnetic behavior similar to the dysprosium analogue but at lower temperatures. The energy barrier for the reversal of the magnetization of the CoTb(III) analogue is Ueff ≥ 15.6(4) K, while for the CoEr(III) analogue Ueff ≥ 9.9(8) K. The magnetic properties are discussed in terms of distortions of the 4f electron cloud.

  7. Sol-gel-derived hybrid materials multi-doped with rare-earth metal ions

    Science.gov (United States)

    Zelazowska, E.; Rysiakiewicz-Pasek, E.; Borczuch-Laczka, M.; Cholewa-Kowalska, K.

    2012-06-01

    Four different hybrid organic-inorganic materials based on TiO2-SiO2 matrices with organic additives and doped with rare-earth metal ions (III) from the group of europium, cerium, terbium, neodymium, dysprosium and samarium, were synthesized by sol-gel method. Tetraethyl orthosilicate, titanium (IV) isopropoxide and organic compounds, such as butyl acrylate, butyl methacrylate, ethyl acetoacetate, ethylene glycol dimethacrylate, ethyl acetate, propylene carbonate, organic solvents and certain inorganic salts were used in the synthesis. The inorganic part of the sols, which were used in the synthesis of all the hybrid materials, was prepared separately and then the organic parts were added. The materials obtained were aged for three weeks at room temperature and then heated in an electric oven for three hours at temperatures of 80 °C-150 °C. Scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM/EDX); X-ray diffraction (XRD); Fourier transform infrared spectroscopy (KBr technique); 29Si magic-angle spinning nuclear magnetic resonance; and fluorescence spectroscopy were used for the examination of morphology, microstructure and luminescence properties, respectively. Photoluminescence properties with relatively intense narrow emission lines of Tb, Eu, Dy, Nd, Sm respectively to the RE-ions doping, were observed for all the hybrid materials.

  8. Time-gated FRET nanoassemblies for rapid and sensitive intra- and extracellular fluorescence imaging.

    Science.gov (United States)

    Afsari, Hamid Samareh; Cardoso Dos Santos, Marcelina; Lindén, Stina; Chen, Ting; Qiu, Xue; van Bergen En Henegouwen, Paul M P; Jennings, Travis L; Susumu, Kimihiro; Medintz, Igor L; Hildebrandt, Niko; Miller, Lawrence W

    2016-06-01

    Time-gated Förster resonance energy transfer (FRET) using the unique material combination of long-lifetime terbium complexes (Tb) and semiconductor quantum dots (QDs) provides many advantages for highly sensitive and multiplexed biosensing. Although time-gated detection can efficiently suppress sample autofluorescence and background fluorescence from directly excited FRET acceptors, Tb-to-QD FRET has rarely been exploited for biomolecular imaging. We demonstrate Tb-to-QD time-gated FRET nanoassemblies that can be applied for intra- and extracellular imaging. Immunostaining of different epitopes of the epidermal growth factor receptor (EGFR) with Tb- and QD-conjugated antibodies and nanobodies allowed for efficient Tb-to-QD FRET on A431 cell membranes. The broad usability of Tb-to-QD FRET was further demonstrated by intracellular Tb-to-QD FRET and Tb-to-QD-to-dye FRET using microinjection as well as cell-penetrating peptide-mediated endocytosis with HeLa cells. Effective brightness enhancement by FRET from several Tb to the same QD, the use of low nanomolar concentrations, and the quick and sensitive detection void of FRET acceptor background fluorescence are important advantages for advanced intra- and extracellular imaging of biomolecular interactions.

  9. Nanosensors having dipicolinic acid imprinted nanoshell for Bacillus cereus spores detection

    Science.gov (United States)

    Gültekin, Aytaç; Ersöz, Arzu; Sarıözlü, Nalan Yılmaz; Denizli, Adil; Say, Rıdvan

    2010-08-01

    Molecular imprinted polymers (MIPs) as a recognition element for sensors are increasingly of interest and MIP nanoclusters have started to appear in the literature. In this study, we have proposed a novel thiol ligand-capping method with polymerizable methacryloylamido-cysteine (MAC) attached to gold-silver nanoclusters, reminiscent of a self-assembled monolayer and have reconstructed surface shell by synthetic host polymers based on molecular imprinting method for recognition. In this method, methacryloylamidoantipyrine-terbium ((MAAP)2-Tb(III)) has been used as a new metal-chelating monomer via metal coordination-chelation interactions and dipicolinic acid (DPA) which is main participant of Bacillus cereus spores used as a model. Nanoshell sensors with templates give a cavity that is selective for DPA. The DPA can simultaneously chelate to Tb(III) metal ion and fit into the shape-selective cavity. Thus, the interaction between Tb(III) ion and free coordination spheres has an effect on the binding ability of the gold-silver nanoclusters nanosensor. The binding affinity of the DPA imprinted nanoclusters has been investigated by using the Langmuir and Scatchard methods, and the respective affinity constants ( K affinity) determined were found to be 1.43 × 104 and 9.1 × 106 mol L-1.

  10. Nanosensors having dipicolinic acid imprinted nanoshell for Bacillus cereus spores detection

    Energy Technology Data Exchange (ETDEWEB)

    Gueltekin, Aytac [Trakya University, Department of Chemistry (Turkey); Ersoez, Arzu [Anadolu University, Department of Chemistry, Faculty of Science, Yunusemre Campus (Turkey); Sarioezlue, Nalan Yilmaz [Anadolu University, Department of Biology (Turkey); Denizli, Adil [Hacettepe University, Department of Chemistry (Turkey); Say, Ridvan, E-mail: rsay@anadolu.edu.t [Anadolu University, Department of Chemistry, Faculty of Science, Yunusemre Campus (Turkey)

    2010-08-15

    Molecular imprinted polymers (MIPs) as a recognition element for sensors are increasingly of interest and MIP nanoclusters have started to appear in the literature. In this study, we have proposed a novel thiol ligand-capping method with polymerizable methacryloylamido-cysteine (MAC) attached to gold-silver nanoclusters, reminiscent of a self-assembled monolayer and have reconstructed surface shell by synthetic host polymers based on molecular imprinting method for recognition. In this method, methacryloylamidoantipyrine-terbium ((MAAP){sub 2}-Tb(III)) has been used as a new metal-chelating monomer via metal coordination-chelation interactions and dipicolinic acid (DPA) which is main participant of Bacillus cereus spores used as a model. Nanoshell sensors with templates give a cavity that is selective for DPA. The DPA can simultaneously chelate to Tb(III) metal ion and fit into the shape-selective cavity. Thus, the interaction between Tb(III) ion and free coordination spheres has an effect on the binding ability of the gold-silver nanoclusters nanosensor. The binding affinity of the DPA imprinted nanoclusters has been investigated by using the Langmuir and Scatchard methods, and the respective affinity constants (K{sub affinity}) determined were found to be 1.43 x 10{sup 4} and 9.1 x 10{sup 6} mol L{sup -1}.

  11. submitter Preclinical in vivo application of $^{152}$Tb-DOTANOC: a radiolanthanide for PET imaging

    CERN Document Server

    Müller, Cristina; Johnston, Karl; Köster, Ulli; Schmid, Raffaella; Türler, Andreas; van der Meulen, Nicholas P

    2016-01-01

    Background:Terbium has attracted the attention of researchers and physicians due to the existence of four medically interesting radionuclides, potentially useful for SPECT and PET imaging, as well as for α- and $β^−$-radionuclide therapy. The aim of this study was to produce $^{152}$Tb $(T_{1/2} = 17.5 h, E_{β+av} = 1140 keV)$ and evaluate it in a preclinical setting in order to demonstrate its potential for PET imaging. For this purpose, DOTANOC was used for targeting the somatostatin receptor in AR42J tumor-bearing mice. Methods: $^{152}$Tb was produced by proton-induced spallation of tantalum targets, followed by an online isotope separation process at ISOLDE/CERN. After separation of $^{152}$Tb using cation exchange chromatography, it was directly employed for radiolabeling of DOTANOC. PET/CT scans were performed with AR42J tumor-bearing mice at different time points after injection of $^{152}$Tb-DOTANOC which was applied at variable molar peptide amounts. 177Lu-DOTANOC was prepared and used...

  12. Fluorescent lighting with aluminum nitride phosphors

    Science.gov (United States)

    Cherepy, Nerine J.; Payne, Stephen A.; Seeley, Zachary M.; Srivastava, Alok M.

    2016-05-10

    A fluorescent lamp includes a glass envelope; at least two electrodes connected to the glass envelope; mercury vapor and an inert gas within the glass envelope; and a phosphor within the glass envelope, wherein the phosphor blend includes aluminum nitride. The phosphor may be a wurtzite (hexagonal) crystalline structure Al.sub.(1-x)M.sub.xN phosphor, where M may be drawn from beryllium, magnesium, calcium, strontium, barium, zinc, scandium, yttrium, lanthanum, cerium, praseodymium, europium, gadolinium, terbium, ytterbium, bismuth, manganese, silicon, germanium, tin, boron, or gallium is synthesized to include dopants to control its luminescence under ultraviolet excitation. The disclosed Al.sub.(1-x)M.sub.xN:Mn phosphor provides bright orange-red emission, comparable in efficiency and spectrum to that of the standard orange-red phosphor used in fluorescent lighting, Y.sub.2O.sub.3:Eu. Furthermore, it offers excellent lumen maintenance in a fluorescent lamp, and does not utilize "critical rare earths," minimizing sensitivity to fluctuating market prices for the rare earth elements.

  13. New feature of the neutron color image intensifier

    Science.gov (United States)

    Nittoh, Koichi; Konagai, Chikara; Noji, Takashi; Miyabe, Keisuke

    2009-06-01

    We developed prototype neutron color image intensifiers with high-sensitivity, wide dynamic range and long-life characteristics. In the prototype intensifier (Gd-Type 1), a terbium-activated Gd 2O 2S is used as the input-screen phosphor. In the upgraded model (Gd-Type 2), Gd 2O 3 and CsI:Na are vacuum deposited to form the phosphor layer, which improved the sensitivity and the spatial uniformity. A europium-activated Y 2O 2S multi-color scintillator, emitting red, green and blue photons with different intensities, is utilized as the output screen of the intensifier. By combining this image intensifier with a suitably tuned high-sensitive color CCD camera, higher sensitivity and wider dynamic range could be simultaneously attained than that of the conventional P20-phosphor-type image intensifier. The results of experiments at the JRR-3M neutron radiography irradiation port (flux: 1.5×10 8 n/cm 2/s) showed that these neutron color image intensifiers can clearly image dynamic phenomena with a 30 frame/s video picture. It is expected that the color image intensifier will be used as a new two-dimensional neutron sensor in new application fields.

  14. Photon Conversion and Radiation Synergism in Eu/Tb Complexes Incorporated Poly Methyl Methacrylate

    Directory of Open Access Journals (Sweden)

    P. Xiao

    2016-01-01

    Full Text Available Green and red emissions in terbium and europium benzoic acids (TBA and EBA incorporated poly methyl methacrylates (PMMA are exhibited. Larger intensity parameters Ω2 (11.13×10-20 cm2 and Ω4 (13.15×10-20 cm2 of Eu3+ indicate a high inversion asymmetrical and strong covalent environment around lanthanide (Ln ions and maximum emission cross section σem-max (2.45×10-21 cm2 for the dominant transition D50→F27 of Eu3+ reveals the effective photon conversion capacity in EBA incorporated PMMA. Color variation and fluorescence enhancement are validated to be originated from energy transfer and synergistic effect in TBA/EBA coincorporated PMMA system. The results indicate that Eu and Tb complexes incorporated PMMA with effective photon conversion hold great prospect in increment of lighting quality and enhancement of solar-cell efficiency employed in outer space.

  15. Preparation and Scintillating Properties of Sol-Gel Eu3+, Tb3+ Co-Doped Lu2O3 Nanopowders

    Directory of Open Access Journals (Sweden)

    Joel Moreno Palmerin

    2011-09-01

    Full Text Available Nanocrystalline Eu3+, Tb3+ co-doped Lu2O3 powders with a maximum size of 25.5 nm were prepared by the sol-gel process, using lutetium, europium and terbium nitrates as precursors, and ethanol as a solvent. Differential thermal analysis (DTA and infrared spectroscopy (IR were used to study the chemical changes during the xerogel annealing. After the sol evaporation at 100 °C, the formed gel was annealed from 300 to 900 °C for 30 min under a rich O2 atmosphere, and the yielded product was analyzed by X-ray diffraction (XRD to characterize the microstructural behavior and confirm the crystalline structure. The results showed that Lu2O3 nanopowders start to crystallize at 400 °C and that the crystallite size increases along with the annealing temperature. A transmission electron microscopy (TEM study of samples annealed at 700 and 900 °C was carried out in order to analyze the microstructure, as well as the size, of crystallites. Finally, in regard to scintillating properties, Eu3+ dopant (5 mol%, Tb3+ codoped Lu2O3 exhibited a typical red emission at 611 nm (Do→7F2, furthermore, the effect of Tb3+ molar content (0.01, 0.015 and 0.02% mol on the Eu3+ radioluminiscence was analyzed and it was found that the higher emission intensity corresponds to the lower Tb3+ content.

  16. Simultaneous detection of Human Immunodeficiency Virus 1 and Hepatitis B virus infections using a dual-label time-resolved fluorometric assay

    Directory of Open Access Journals (Sweden)

    Soukka Tero

    2010-11-01

    Full Text Available Abstract A highly specific and novel dual-label time-resolved immunofluorometric assay was developed exploiting the unique emission wavelengths of the intrinsically fluorescent terbium (Tb3+ and europium (Eu3+ tracers for the simultaneous detection of human immunodeficiency virus 1 (HIV-1 and hepatitis B virus (HBV infections, respectively. HIV-1 infection was detected using a double antigen sandwich format wherein anti-HIV-1 antibodies were captured using an in vivo biotinylated version of a chimeric HIV-1 antigen and revealed using the same antigen labeled with Tb3+ chelate. Hepatitis B surface antigen (HBsAg, which served as the marker of HBV infection, was detected in a double antibody sandwich using two monoclonal antibodies (mAbs, one chemically biotinylated to capture, and the other labeled with Eu3+ nanoparticles, to reveal. The performance of the assay was evaluated using a collection (n = 60 of in-house and commercially available human sera panels. This evaluation showed the dual-label assay to possess high degrees of specificity and sensitivity, comparable to those of commercially available, single analyte-specific kits for the detection of HBsAg antigen and anti-HIV antibodies. This work demonstrates the feasibility of developing a potentially time- and resource-saving multiplex assay for screening serum samples for multiple infections in a blood bank setting.

  17. Creating infinite contrast in fluorescence microscopy by using lanthanide centered emission.

    Directory of Open Access Journals (Sweden)

    Miguel R Carro-Temboury

    Full Text Available The popularity of fluorescence microscopy arises from the inherent mode of action, where the fluorescence emission from probes is used to visualize selected features on a presumed dark background. However, the background is rarely truly dark, and image processing and analysis is needed to enhance the fluorescent signal that is ascribed to the selected feature. The image acquisition is facilitated by using considerable illumination, bright probes at a relatively high concentration in order to make the fluorescent signal significantly more intense than the background signal. Here, we present two methods for completely removing the background signal in spectrally resolved fluorescence microscopy. The methodology is applicable for all probes with narrow and well-defined emission bands (Full width half-maximum < 20 nm. Here, we use two lanthanide based probes exploiting the narrow emission lines of europium(III and terbium(III ions. We used a model system with zeolites doped with lanthanides immobilized in a polymer stained with several fluorescent dyes regularly used in bioimaging. After smoothing the spectral data recorded in each pixel, they are differentiated. Method I is based on the direct sum of the gradient, while method II resolves the fluorescent signal by subtracting a background calculated via the gradient. Both methods improve signal-to-background ratio significantly and we suggest that spectral imaging of lanthanide-centered emission can be used as a tool to obtain absolute contrast in bioimaging.

  18. The effect of core and lanthanide ion dopants in sodium fluoride-based nanocrystals on phagocytic activity of human blood leukocytes

    Energy Technology Data Exchange (ETDEWEB)

    Sojka, Bartlomiej [Wroclaw University of Science and Technology, Department of Experimental Physics (Poland); Liskova, Aurelia; Kuricova, Miroslava [Slovak Medical University, Medical Faculty, Department of Immunology and Immunotoxicology (Slovakia); Banski, Mateusz; Misiewicz, Jan [Wroclaw University of Science and Technology, Department of Experimental Physics (Poland); Dusinska, Maria [Norwegian Institute for Air Research, Health Effects Laboratory, Department of Environmental Chemistry (Norway); Horvathova, Mira; Ilavska, Silvia; Szabova, Michaela [Slovak Medical University, Medical Faculty, Department of Immunology and Immunotoxicology (Slovakia); Rollerova, Eva [Slovak Medical University, Faculty of Public Health, Department of Toxicology (Slovakia); Podhorodecki, Artur, E-mail: artur.p.podhorodecki@pwr.edu.pl [Wroclaw University of Science and Technology, Department of Experimental Physics (Poland); Tulinska, Jana, E-mail: jana.tulinska@szu.sk [Slovak Medical University, Medical Faculty, Department of Immunology and Immunotoxicology (Slovakia)

    2017-02-15

    Sodium fluoride-based β-NaLnF4 nanoparticles (NPs) doped with lanthanide ions are promising materials for application as luminescent markers in bio-imaging. In this work, the effect of NPs doped with yttrium (Y), gadolinium (Gd), europium (Eu), thulium (Tm), ytterbium (Yb) and terbium (Tb) ions on phagocytic activity of monocytes and granulocytes and the respiratory burst was examined. The surface functionalization of <10-nm NPs was performed according to our variation of patent pending ligand exchange method that resulted in meso-2,3-dimercaptosuccinic acid (DMSA) molecules on their surface. Y-core-based NCs were doped with Eu ions, which enabled them to be excited with UV light wavelengths. Cultures of human peripheral blood (n = 8) were in vitro treated with five different concentrations of eight NPs for 24 h. In summary, neither type of nanoparticles is found toxic with respect to conducted test; however, some cause toxic effects (they have statistically significant deviations compared to reference) in some selected doses tested. Both core types of NPs (Y-core and Gd-core) impaired the phagocytic activity of monocytes the strongest, having minimal or none whatsoever influence on granulocytes and respiratory burst of phagocytic cells. The lowest toxicity was observed in Gd-core, Yb, Tm dopants and near-infrared nanoparticles. Clear dose-dependent effect of NPs on phagocytic activity of leukocytes and respiratory burst of cells was observed for limited number of samples.

  19. A novel structure optical fiber radiation dosimeter for radiotherapy applications

    Science.gov (United States)

    Sun, Weimin; Qin, Zhuang; Ma, Yu; Zhao, Wenhui; Hu, Yaosheng; Zhang, Daxin; Chen, Ziyin; Lewis, Elfed

    2016-04-01

    An investigation into a novel in-vivo PMMA (polymethyl methacrylate) fiber-optic dosimeter to monitor the dose of ionizing radiation, both for instantaneous and integrating measurements, for radiotherapy applications is proposed. This fiber sensor is designed as an intracorporal X-ray ionizing sensor to enhance the curative effect of radiotherapy. The fiber-optic dosimeter is made in a PMMA fiber, whose core is micromachined to create a small diameter (0.25 to 0.5 mm) hole at one fiber end. An inorganic scintillating material, terbium-doped gadolinium oxysulfide (Gd2O2S:Tb) is chosen as the sensing material, because it can fluoresce on immediately under exposure of ionizing radiation (X-Rays or electron beam). This sensing material is filled and packaged in the small hole by epoxy resin adhesive. This kind of novel structure dosimeter shows high light coupling efficiency compared with other kind of inorganic scintillation dosimeter. This fiber-optic dosimeter shows good repeatability with a maximum deviation of 0.16%. The testing results of the fiber-optic dosimeter are perfectly proportional to the data of IC with R2 as 0.9999. In addition, the fiber sensor shows excellent isotropic in its radial angular dependence. All the experiments indicate that the fiber-optic dosimeter is properly used for patient in-vivo dosimeter such as brachytherapy applications or intraoperative radiation therapy.

  20. Polarizers, optical bridges and Sagnac interferometers for nanoradian polarization rotation measurements

    CERN Document Server

    Rowe, Alistair; Dilasser, Guillaume; Lassailly, Yves; Peretti, Jacques

    2016-01-01

    The ability to measure nanoradian polarization rotations, $\\theta_F$, in the photon shot noise limit is investigated for partially crossed polarizers (PCP), a static Sagnac interferometer and an optical bridge, each of which can in principal be used in this limit with equivalent figures-of-merit (FOM). In practice a common mode source noise rejection ratio of $1/2\\theta_F$ obtained with the bridge enables this configuration to operate in the photon shot noise limit even at high light intensities. This is demonstrated for a rotation angle of 38 $\\mu$rad, obtained via the Faraday effect in a terbium gallium garnet (TGG), where the experimentally measured FOM in units of $10^{-11}$/photon are 2 (PCP), 1 (Sagnac), and 3.5 (bridge). The superior performance of the bridge is illustrated via the measurement of a 3 nrad rotation occuring when the TGG is placed in an axial magnetic field of 0.9 nT. While the Sagnac is shown to be functionally equivalent to the PCP in terms of the FOM, unlike the PCP it is able to disc...

  1. By-product metals are technologically essential but have problematic supply.

    Science.gov (United States)

    Nassar, N T; Graedel, T E; Harper, E M

    2015-04-01

    The growth in technological innovation that has occurred over the past decades has, in part, been possible because an increasing number of metals of the periodic table are used to perform specialized functions. However, there have been increasing concerns regarding the reliability of supply of some of these metals. A main contributor to these concerns is the fact that many of these metals are recovered only as by-products from a limited number of geopolitically concentrated ore deposits, rendering their supplies unable to respond to rapid changes in demand. Companionality is the degree to which a metal is obtained largely or entirely as a by-product of one or more host metals from geologic ores. The dependence of companion metal availability on the production of the host metals introduces a new facet of supply risk to modern technology. We evaluated companionality for 62 different metals and metalloids, and show that 61% (38 of 62) have companionality greater than 50%. Eighteen of the 38-including such technologically essential elements as germanium, terbium, and dysprosium-are further characterized as having geopolitically concentrated production and extremely low rates of end-of-life recycling. It is this subset of companion metals-vital in current technologies such as electronics, solar energy, medical imaging, energy-efficient lighting, and other state-of-the-art products-that may be at the greatest risk of supply constraints in the coming decades.

  2. Structural, spectroscopic and cytotoxicity studies of TbF3@CeF3 and TbF3@CeF3@SiO2 nanocrystals

    Science.gov (United States)

    Grzyb, Tomasz; Runowski, Marcin; Dąbrowska, Krystyna; Giersig, Michael; Lis, Stefan

    2013-10-01

    Terbium fluoride nanocrystals, covered by a shell, composed of cerium fluoride were synthesized by a co-precipitation method. Their complex structure was formed spontaneously during the synthesis. The surface of these core/shell nanocrystals was additionally modified by silica. The properties of TbF3@CeF3 and TbF3@CeF3@SiO2 nanocrystals, formed in this way, were investigated. Spectroscopic studies showed that the differences between these two groups of products resulted from the presence of the SiO2 shell. X-ray diffraction patterns confirmed the trigonal crystal structure of TbF3@CeF3 nanocrystals. High resolution transmission electron microscopy in connection with energy-dispersive X-ray spectroscopy showed a complex structure of the formed nanocrystals. Crystallized as small discs, `the products', with an average diameter around 10 nm, showed an increase in the concentration of Tb3+ ions from surface to the core of nanocrystals. In addition to photo-physical analyses, cytotoxicity studies were performed on HSkMEC (Human Skin Microvascular Endothelial Cells) and B16F0 mouse melanoma cancer cells. The cytotoxicity of the nanomaterials was neutral for the investigated cells with no toxic or antiproliferative effect in the cell cultures, either for normal or for cancer cells. This fact makes the obtained nanocrystals good candidates for biological applications and further modifications of the SiO2 shell.

  3. Novel Flourescent Sensors for the Detection of Organic Molecules in Extraterrestrial Samples

    Science.gov (United States)

    Adkin, Roy C.; Bruce, James I.; Pearson, Victoria K.

    2015-04-01

    Organic compounds in extraterrestrial samples have mostly been elucidated by destructive analytical techniques therefore information regarding spatial relationships between minerals and organic species is lost. Minerals form under specific chemical and physical conditions so organic compounds associated with these minerals are likely to have formed under the same conditions. It is therefore possible to infer in which cosmological provinces their chemical evolution took place. We will describe progress towards developing fluorescent sensors that may resolve spatial discrimination. Lanthanide elements such as europium and terbium produce well defined line-like, high intensity and long lived fluorescent emissions. Interactions with organic molecules may alter the luminescent emission characteristics. The lanthanide atom needs to be rendered chemically inert but must remain susceptible to these organic molecule interactions. An organic ligand must be employed to attain this. DOTA (1,4,7,10-tetraazacyclododecanetetracetic acid) was chosen as a plausible organic ligand because its structure, a tetra-substituted cyclen ring, and ability to chelate are well characterized. It is also commercially available. Fluorescent lanthanide-DOTA complexes are used in many biological and analytical imaging applications so it is logical to investigate their applicability to fluorimetric analysis of extraterrestrial organics. Lanthanide-DOTA complexes are very stable because the lanthanide metal atom is enveloped within the DOTA structure. Experimental procedures were designed to investigate lanthanide/analyte interactions and their effect upon fluorescent emissions. A range of compounds were chosen giving a good representation of the organics identified in extraterrestrial samples and whether they may to interact with the lanthanide metal ion. An Europium-DOTA baseline fluorescent spectrum was obtained and compared against Europium-DOTA/analyte mixtures of a range of concentrations

  4. Enhancement of anion binding in lanthanide optical sensors.

    Science.gov (United States)

    Cable, Morgan L; Kirby, James P; Gray, Harry B; Ponce, Adrian

    2013-11-19

    In the design of molecular sensors, researchers exploit binding interactions that are usually defined in terms of topology and charge complementarity. The formation of complementary arrays of highly cooperative, noncovalent bonding networks facilitates protein-ligand binding, leading to motifs such as the "lock-and-key". Synthetic molecular sensors often employ metal complexes as key design elements as a way to construct a binding site with the desired shape and charge to achieve target selectivity. In transition metal complexes, coordination number, structure and ligand dynamics are governed primarily by a combination of inner-sphere covalent and outer-sphere noncovalent interactions. These interactions provide a rich variable space that researchers can use to tune structure, stability, and dynamics. In contrast, lanthanide(III)-ligand complex formation and ligand-exchange dynamics are dominated by reversible electrostatic and steric interactions, because the unfilled f shell is shielded by the larger, filled d shell. Luminescent lanthanides such as terbium, europium, dysprosium, and samarium display many photophysical properties that make them excellent candidates for molecular sensor applications. Complexes of lanthanide ions act as receptors that exhibit a detectable change in metal-based luminescence upon binding of an anion. In our work on sensors for detection of dipicolinate, the unique biomarker of bacterial spores, we discovered that the incorporation of an ancillary ligand (AL) can enhance binding constants of target anions to lanthanide ions by as much as two orders of magnitude. In this Account, we show that selected ALs in lanthanide/anion systems greatly improve sensor performance for medical, planetary science, and biodefense applications. We suggest that the observed anion binding enhancement could result from an AL-induced increase in positive charge at the lanthanide ion binding site. This effect depends on lanthanide polarizability, which can be

  5. Isomer spectroscopy of neutron-rich 168Tb103

    Science.gov (United States)

    Gurgi, L. A.; Regan, P. H.; Söderström, P.-A.; Watanabe, H.; Walker, P. M.; Podolyák, Zs.; Nishimura, S.; Berry, T. A.; Doornenbal, P.; Lorusso, G.; Isobe, T.; Baba, H.; Xu, Z. Y.; Sakurai, H.; Sumikama, T.; Catford, W. N.; Bruce, A. M.; Browne, F.; Lane, G. J.; Kondev, F. G.; Odahara, A.; Wu, J.; Liu, H. L.; Xu, F. R.; Korkulu, Z.; Lee, P.; Liu, J. J.; Phong, V. H.; Yag, A.; Zhang, G. X.; Alharbi, T.; Carroll, R. J.; Chae, K. Y.; Dombradi, Zs.; Estrade, A.; Fukuda, N.; Griffin, C.; Ideguchi, E.; Inabe, N.; Kanaoka, H.; Kojouharov, I.; Kubo, T.; Kubono, S.; Kurz, N.; Kuti, I.; Lalkovski, S.; Lee, E. J.; Lee, C. S.; Lotay, G.; Moon, C.-B.; Nishizuka, I.; Nita, C. R.; Patel, Z.; Roberts, O. J.; Schaffner, H.; Shand, C. M.; Suzuki, H.; Takeda, H.; Terashima, S.; Vajta, Zs.; Yoshida, S.; Valiente-Dòbon, J. J.

    2017-11-01

    In-flight fission of a 345 MeV per nucleon 238U primary beam on a 2 mm thick 9Be target has been used to produce and study the decays of a range of neutron-rich nuclei centred around the doubly mid-shell nucleus 170Dy at the RIBF Facility, RIKEN, Japan. The produced secondary fragments of interest were identified event-by-event using the BigRIPS separator. The fragments were implanted into the WAS3ABI position sensitive silicon active stopper which allowed pixelated correlations between implants and their subsequent β-decay. Discrete γ-ray transitions emitted following decays from either metastable states or excited states populated following beta decay were identified using the 84 coaxial high-purity germanium (HPGe) detectors of the EURICA spectrometer, which was complemented by 18 additional cerium-doped lanthanum bromide (LaBr3) fast-timing scintillation detectors from the FATIMA collaboration. This paper presents the internal decay of a metastable isomeric excited state in the odd-odd nucleus 168Tb, which corresponds to a single proton-neutron hole configuration in the valence maximum nucleus 170Dy. These data represent the first information on excited states in this nucleus, which is the most neutron-rich odd-odd isotope of terbium (Z=65) studied to date. Nilsson configurations associated with an axially symmetric, prolate-deformed nucleus are proposed for the 168Tb ground state the observed isomeric state by comparison with Blocked BCS-Nilsson calculations.

  6. Structural, spectral, dielectric and magnetic properties of Tb–Dy doped Li-Ni nano-ferrites synthesized via micro-emulsion route

    Energy Technology Data Exchange (ETDEWEB)

    Junaid, Muhammad, E-mail: junaid.malik95@yahoo.com [Department of Physics, The Islamia University of Bahawalpur, Bahawalpur 63100 (Pakistan); Khan, Muhammad Azhar, E-mail: azhar.khan@iub.edu.pk [Department of Physics, The Islamia University of Bahawalpur, Bahawalpur 63100 (Pakistan); Iqbal, F. [Department of Physics, The Islamia University of Bahawalpur, Bahawalpur 63100 (Pakistan); Murtaza, Ghulam [Centre for Advanced Studies in Physics, Government College University, Lahore 54000 (Pakistan); Akhtar, Majid Niaz; Ahmad, Mukhtar [Department of Physics, COMSATS Institute of Information Technology, Lahore 54000 (Pakistan); Shakir, Imran [Deanship of scientific research, College of Engineering, King Saud University, PO Box 800, Riyadh 11421 (Saudi Arabia); Warsi, Muhammad Farooq [Department of Chemistry, The Islamia University of Bahawalpur, Bahawalpur 63100 (Pakistan)

    2016-12-01

    Terbium (Tb) and dysprosium (Dy) doped lithium-nickel nano-sized ferrites (Li{sub 0.2}Ni{sub 0.8}Tb{sub 0.5x}Dy{sub 0.5x}Fe{sub 2−x}O{sub 4} where x=0.00−0.08) were prepared by micro-emulsion technique. The X-ray diffraction (XRD) patterns confirmed the single phase cubic spinel structure. The lattice constant was increased due to larger ionic radii of Tb{sup 3+} and Dy{sup 3+} cations. The crystallite size was found in the range 30–42 nm. The FTIR (Fourier transform infrared spectroscopy) spectra revealed two significant absorption bands (~400–600 cm{sup −1}) which indicate the formation of cubic spinel structure. The peaking behavior of dielectric parameters was observed beyond 1.5 GHz. The dielectric constant and dielectric loss were found to decrease by the increase of Tb–Dy contents and frequency. The doping of Tb and Dy in Li–Ni ferrites led to increase the coercive field (120–156 Oe). The smaller magnetic and dielectric parameters suggested the possible utility of these nano-materials in switching and microwave devices applications. - Highlights: • Li{sub 0.2}Ni{sub 0.8}Tb{sub 0.5x}Dy{sub 0.5x}Fe{sub 2-x}O{sub 4} ferrites were synthesized by micro-emulsion route. • Tb and Dy addition improves coercivity while decreased saturation magnetization. • These nanomaterials can be useful in microwave and switching devices applications.

  7. Preparation and studies of Eu{sup 3+} and Tb{sup 3+} co-doped Gd{sub 2}O{sub 3} and Y{sub 2}O{sub 3} sol-gel scintillating films

    Energy Technology Data Exchange (ETDEWEB)

    Morales Ramirez, A. de J, E-mail: amoralesra@ipn.m [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada (CICATA) Unidad Altamira Instituto Politecnico Nacional Km. 14.5 Carr. Tampico-Puerto Industrial, C.P. 89600, Altamira, Tamaulipas (Mexico); Depto. de Ingenieria Metalurgica, ESIQIE-Instituto Politecnico Nacional UPALM C.P. 07738, Mexico D.F. (Mexico); Garcia Murillo, A.; Carrillo Romo, F. de J [Depto. de Ingenieria Metalurgica, ESIQIE-Instituto Politecnico Nacional UPALM C.P. 07738, Mexico D.F. (Mexico); Ramirez Salgado, J. [Programa de Ingenieria Molecular, Instituto Mexicano del Petroleo, Eje Lazaro Cardenas No. 152, CP 07730, Mexico D.F. (Mexico); Le Luyer, C. [LPCML, CNRS-UMR 5620/Universite Claude Bernard Lyon 1/69622 Villeurbanne Cedex (France); Chadeyron, G.; Boyer, D. [Laboratoire des Materiaux Inorganiques, CNRS-UMR 6002, Universite Blaise Pascal, 24 Ave des Landais F 63177 Aubiere Cedex (France); Moreno Palmerin, J. [Depto. de Ingenieria Metalurgica, ESIQIE-Instituto Politecnico Nacional UPALM C.P. 07738, Mexico D.F. (Mexico)

    2009-10-30

    Eu{sup 3+} (2.5 at.%) and Tb{sup 3+} (0.005-0.01 at.%) co-doped gadolinium and yttrium oxide (Gd{sub 2}O{sub 3} and Y{sub 2}O{sub 3}) powders and films have been prepared using the sol-gel process. High density and optical quality thin films were prepared with the dip-coating technique. Gadolinium (III) 2,4-pentadionate and yttrium (III) 2,4-pentadionate were used as precursors, and europium and terbium in their nitrate forms were used as doping agents. Chemical and structural analyses (infrared spectroscopy, X-ray diffraction and high-resolution transmission electron microscopy) were conducted on both sol-gel precursor powders and dip-coated films. The morphology of thin films heat-treated at 700 {sup o}C was studied by means of atomic force microscopy. It was shown that the highly dense and very smooth films had a root mean roughness (RMS) of 2 nm {+-} 0.2 (A = 0.0075 Tb{sup 3+}) and 24 nm {+-} 3.0 (B = 0.01 Tb{sup 3+}). After treatment at 700 {sup o}C, the crystallized films were in the cubic phase and presented a polycrystalline structure made up of randomly oriented crystallites with grain sizes varying from 20 to 60 nm. The X-ray induced emission spectra of Eu{sup 3+}- and Tb{sup 3+}-doped Gd{sub 2}O{sub 3} and Y{sub 2}O{sub 3} powders showed that Tb{sup 3+} contents of 0.005, 0.0075 and 0.01 at.% affected their optical properties. Lower Tb{sup 3+} concentrations (down to 0.005 at.%) in both systems enhanced the light yield.

  8. Direct measurement of Lubberts effect in CsI:Tl scintillators using single x-ray photon imaging

    Science.gov (United States)

    Howansky, Adrian; Lubinsky, A. R.; Ghose, S. K.; Suzuki, Katsuhiko; Zhao, Wei

    2017-03-01

    The imaging performance of an indirect flat panel detector (I-FPD) is fundamentally limited by that of its scintillator. The scintillator's modulation transfer function (MTF) varies as a function of the depth of x-ray interaction in the layer, due to differences in the lateral spread of light before detection by the optical sensor. This variation degrades the spatial frequency-dependent detective quantum efficiency (DQE(f)) of I-FPDs, and is quantified by the Lubberts effect. The depth-dependent MTFs of various scintillators used in I-FPDs have been estimated using Monte Carlo simulations, but have never been measured directly. This work presents the first experimental measurements of the depth-dependent MTF of thallium-doped cesium iodide (CsI) and terbium-doped Gd2O2S (GOS) scintillators with thickness ranging from 200 - 1000 μm. Light bursts from individual x-ray interactions occurring at known, fixed depths within a scintillator are imaged using an ultra-high-sensitivity II-EMCCD (image-intensifier, electron multiplying charge coupled device) camera. X-ray interaction depth in the scintillator is localized using a micro-slit beam of parallel synchrotron radiation (32 keV), and varied by translation in 50 +/- 1 µm depth intervals. Fourier analysis of the imaged light bursts is used to deduce the MTF versus x-ray interaction depth z. Measurements of MTF(z,f) are used to calculate presampling MTF(f) with RQA-M3, RQA5 and RQA9 beam qualities and compared with conventional slanted edge measurements. Images of the depth-varying light bursts are used to derive each scintillator's Lubberts function for a 32 keV beam.

  9. Characterization of Gd{sub 2}O{sub 2}S:Tb scintillator screen with pixelated silicon substrate for digital X-ray imaging application

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Yul

    2010-02-15

    X-ray imaging detector in combination with scintillator screens have been widely used in digital X-ray imaging applications. The degradation of spatial resolution by light diffusion in scintillator layer can be overcome by pixelation. In this research, terbium doped gadolinium oxysulfide (Gd{sub 2}O{sub 2}S:Tb) was used as scintillation material for pixelated scintillator screen based on silicon substrates with micropore array of various dimensions fabricated using the photolithography and deep reactive ion etching (DRIE) process. The relative light output and the modulation transfer function (MTF) of each fabricated scintillator screen were measured by a cooled CCD for analysis of the effect of pixelated silicon substrate and optimization of micropore geometry in pixelated scintillator screen. The light transport simulation in pixelated scintillator geometry is conducted using MCNPX and LightTools simulation code. The simulation result is well matched with measurement results when compared of the measurement and simulation results. As the results, higher spatial resolution was obtained for smaller micropore pitch. The light output of the pixelated scintillator screens with equivalent fill factor decreases as the micropore pitch size decreases or the micropore thickness increases. This is most likely due to the light absorption in silicon wall surfaces. Therefore, further treatment of the wall surface, such as SiO2 reflective coating, seems necessary to compensate the reduction of the light generated. Then, the micropore thickness can be optimized to maximize the light output. The Gd{sub 2}O{sub 2}S:Tb pixelated scintillator screen that has optimized micropore geometry could be applied to digital X-ray imaging.

  10. Evaluation of the modulation transfer function of megavoltage X-rays

    Energy Technology Data Exchange (ETDEWEB)

    Min, Jung-Whan [The Catholic University of Korea, Seoul (Korea, Republic of); The Shingu University College of Korea, Seongnam (Korea, Republic of); Kim, Ki-Won [Samsung Medical Center, Seoul (Korea, Republic of); Kim, Jung-Min; Choi, In-Seok [Korea University, Seoul (Korea, Republic of); Jeong, Hoi-Woun [The Baekseok Culture University College of Korea, Cheon-an (Korea, Republic of); Son, Soon-Yong; Back, Geum-Mun [Asan Medical Center, Seoul (Korea, Republic of); Jung, Jae-Hong [Soonchunhyang University Bucheon Hospital, Bucheon (Korea, Republic of); Jung, Jae-Yong; Choe, Bo-Young [The Catholic University of Korea, Seoul (Korea, Republic of)

    2014-12-15

    The modulation transfer function (MTF) must be measured against the requirements of the specific digital imaging application under consideration in order to evaluate the performance of detector equipment and to further develop the detector by performing quality-assurance (QA) procedures. The purpose of this study was to measure the MTF in digital megavoltage images (DMVs) for radiation therapy (RT) by using an edge block. We used 6 megavolts (MVs) of energy for the pre-sampling MTF, along with a photo-stimulating phosphor-based computed radiography (CR) system and a hexalon lead screen that contained a terbium-doped gadolinium oxysulfide granular phosphor (Gd{sub 2}O{sub 2}S:Tb). The DMV MTF was measured at both low and high resolutions according to changes in the dose in monitor units (MUs) by using four different detector combinations: CR-IP (image plate: photo-stimulable phosphor screen), CR-IP-Lead (image plate + lead screen), CR-IPRegular (fast front screen + image plate + fast front screen) and CR-IP-Fast (fast back screen + image plate + fast front screen). At a low resolution, the MTF 50% and the MTF 10% when using the CR-IP detector increased by about 30% and 46%, in proportion to the increase in the dose from 1 to 20 MU, respectively. At a high resolution, the CR-IP and the CR-IP-Lead detectors showed increases in the MTF of about 8% or 10% when the dose increased from 1 to 20 MU. The present study, therefore, evaluates how edge methods can be helpful in taking MTF measurements during QA tests of a megavoltage imaging (MVI) system.

  11. Dual lanthanide-doped complexes: the development of a time-resolved ratiometric fluorescent probe for anthrax biomarker and a paper-based visual sensor.

    Science.gov (United States)

    Wang, Qi-Xian; Xue, Shi-Fan; Chen, Zi-Han; Ma, Shi-Hui; Zhang, Shengqiang; Shi, Guoyue; Zhang, Min

    2017-08-15

    In this work, a novel time-resolved ratiometric fluorescent probe based on dual lanthanide (Tb: terbium, and Eu: europium)-doped complexes (Tb/DPA@SiO2-Eu/GMP) has been designed for detecting anthrax biomarker (dipicolinic acid, DPA), a unique and major component of anthrax spores. In such complexes-based probe, Tb/DPA@SiO2 can serve as a stable reference signal with green fluorescence and Eu/GMP act as a sensitive response signal with red fluorescence for ratiometric fluorescent sensing DPA. Additionally, the probe exhibits long fluorescence lifetime, which can significantly reduce the autofluorescence interferences from biological samples by using time-resolved fluorescence measurement. More significantly, a paper-based visual sensor for DPA has been devised by using filter paper embedded with Tb/DPA@SiO2-Eu/GMP, and we have proved its utility for fluorescent detection of DPA, in which only a handheld UV lamp is used. In the presence of DPA, the paper-based visual sensor, illuminated by a handheld UV lamp, would result in an obvious fluorescence color change from green to red, which can be easily observed with naked eyes. The paper-based visual sensor is stable, portable, disposable, cost-effective and easy-to-use. The feasibility of using a smartphone with easy-to-access color-scanning APP as the detection platform for quantitative scanometric assays has been also demonstrated by coupled with our proposed paper-based visual sensor. This work unveils an effective method for accurate, sensitive and selective monitoring anthrax biomarker with backgroud-free and self-calibrating properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Isomer spectroscopy of neutron-rich 168 Tb 103

    Energy Technology Data Exchange (ETDEWEB)

    Gurgi, L. A.; Regan, P. H.; Söderström, P. -A.; Watanabe, H.; Walker, P. M.; Podolyák, Zs.; Nishimura, S.; Berry, T. A.; Doornenbal, P.; Lorusso, G.; Isobe, T.; Baba, H.; Xu, Z. Y.; Sakurai, H.; Sumikama, T.; Catford, W. N.; Bruce, A. M.; Browne, F.; Lane, G. J.; Kondev, F. G.; Odahara, A.; Wu, J.; Liu, H. L.; Xu, F. R.; Korkulu, Z.; Lee, P.; Liu, J. J.; Phong, V. H.; Yag, A.; Zhang, G. X.; Alharbi, T.; Carroll, R. J.; Chae, K. Y.; Dombradi, Zs.; Estrade, A.; Fukuda, N.; Griffin, C.; Ideguchi, E.; Inabe, N.; Kanaoka, H.; Kojouharov, I.; Kubo, T.; Kubono, S.; Kurz, N.; Kuti, I.; Lalkovski, S.; Lee, E. J.; Lee, C. S.; Lotay, G.; Moon, C. -B.; Nishizuka, I.; Nita, C. R.; Patel, Z.; Roberts, O. J.; Schaffner, H.; Shand, C. M.; Suzuki, H.; Takeda, H.; Terashima, S.; Vajta, Zs.; Yoshida, S.; Valiente-Dòbon, J. J.

    2017-11-01

    In-flight fission of a 345 MeV per nucleon 238U primary beam on a 2 mm thick 9Be target has been used to produce and study the decays of a range of neutron-rich nuclei centred around the doubly mid-shell nucleus 170Dy at the RIBF Facility, RIKEN, Japan. The produced secondary fragments of interest were identified event-by-event using the BigRIPS separator. The fragments were implanted into the WAS3ABI position sensitive silicon active stopper which allowed pixelated correlations between implants and their subsequent β-decay. Discrete γ-ray transitions emitted following decays from either metastable states or excited states populated following beta decay were identified using the 84 coaxial high-purity germanium (HPGe) detectors of the EURICA spectrometer, which was complemented by 18 additional cerium-doped lanthanum bromide (LaBr3) fast-timing scintillation detectors from the FATIMA collaboration. This paper presents the internal decay of a metastable isomeric excited state in the odd-odd nucleus 168Tb, which corresponds to a single proton-neutron hole configuration in the valence maximum nucleus 170Dy. These data represent the first information on excited states in this nucleus, which is the most neutron-rich odd-odd isotope of terbium (Z=65) studied to date. Nilsson configurations associated with an axially symmetric, prolate-deformed nucleus are proposed for the 168Tb ground state the observed isomeric state by comparison with Blocked BCS-Nilsson calculations.

  13. TprC/D (Tp0117/131), a trimeric, pore-forming rare outer membrane protein of Treponema pallidum, has a bipartite domain structure.

    Science.gov (United States)

    Anand, Arvind; Luthra, Amit; Dunham-Ems, Star; Caimano, Melissa J; Karanian, Carson; LeDoyt, Morgan; Cruz, Adriana R; Salazar, Juan C; Radolf, Justin D

    2012-05-01

    Identification of Treponema pallidum rare outer membrane proteins (OMPs) has been a longstanding objective of syphilis researchers. We recently developed a consensus computational framework that employs a battery of cellular localization and topological prediction tools to generate ranked clusters of candidate rare OMPs (D. L. Cox et al., Infect. Immun. 78:5178-5194, 2010). TP0117/TP0131 (TprC/D), a member of the T. pallidum repeat (Tpr) family, was a highly ranked candidate. Circular dichroism, heat modifiability by SDS-PAGE, Triton X-114 phase partitioning, and liposome incorporation confirmed that full-length, recombinant TprC (TprC(Fl)) forms a β-barrel capable of integrating into lipid bilayers. Moreover, TprC(Fl) increased efflux of terbium-dipicolinic acid complex from large unilamellar vesicles and migrated as a trimer by blue-native PAGE. We found that in T. pallidum, TprC is heat modifiable, trimeric, expressed in low abundance, and, based on proteinase K accessibility and opsonophagocytosis assays, surface exposed. From these collective data, we conclude that TprC is a bona fide rare OMP as well as a functional ortholog of Escherichia coli OmpF. We also discovered that TprC has a bipartite architecture consisting of a soluble N-terminal portion (TprC(N)), presumably periplasmic and bound directly or indirectly to peptidoglycan, and a C-terminal β-barrel (TprC(C)). Syphilitic rabbits generate antibodies exclusively against TprC(C), while secondary syphilis patients fail to mount a detectable antibody response against either domain. The syphilis spirochete appears to have resolved a fundamental dilemma arising from its extracellular lifestyle, namely, how to enhance OM permeability without increasing its vulnerability to the antibody-mediated defenses of its natural human host.

  14. Lanthanide oleates: chelation, self-assembly, and exemplification of ordered nanostructured colloidal contrast agents for medical imaging.

    Science.gov (United States)

    Liu, Guozhen; Conn, Charlotte E; Drummond, Calum J

    2009-12-10

    Eight lanthanide(III) oleates have been prepared and characterized. The chelation and self-assembly structures of these rare-earth oleates have been studied by elemental analysis, Fourier transfer infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD) analysis. Elemental analysis and FTIR results indicate that three oleate anions are complexed with one lanthanide cation and, with the exception of anhydrous cerium(III) oleate, form either a mono- or a hemihydrate. The X-ray analysis showed that the neat lanthanide soaps have a lamellar bilayer structure at room temperature. The thermal behavior has been investigated by cross-polarized optical microscopy (POM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). POM scans showed that all the lanthanide oleates form a lamellar phase in the presence of excess water. Small-angle X-ray scattering (SAXS) and XRD were used to investigate the internal structure of the bulk lanthanide oleates in excess water, and these X-ray results confirmed that the lanthanide oleates do not swell in water. Select lanthanide oleates were dispersed in water to form nonswelling lamellar submicrometer particles, confirmed by dynamic light scattering (DLS) and synchrotron SAXS measurements. NMR results indicated that colloidal dispersions of lanthanide oleates containing paramagnetic ions, such as gadolinium(III), terbium(III), and dysprosium(III), have a significant effect on the longitudinal (T(1)) and transverse (T(2)) relaxation times of protons in water. Time-resolved fluorescence measurements have demonstrated that colloidal dispersions of europium(III) oleate exhibit strong luminescence. The rare earth metal soaps exemplify the potential of self-assembled chelating amphiphiles as contrast agents in medical imaging modalities such as magnetic resonance imaging (MRI) and fluorescence imaging.

  15. Uptake and Effects of Six Rare Earth Elements (REEs on Selected Native and Crop Species Growing in Contaminated Soils.

    Directory of Open Access Journals (Sweden)

    David Carpenter

    Full Text Available Rare earth elements (REEs have become increasingly important metals used in modern technology. Processes including mining, oil refining, discarding of obsolete equipment containing REEs, and the use of REE-containing phosphate fertilizers may increase the likelihood of environmental contamination. However, there is a scarcity of information on the toxicity and accumulation of these metals to terrestrial primary producers in contaminated soils. The objective of this work was to assess the phytotoxicity and uptake from contaminated soil of six REEs (chloride forms of praseodymium, neodymium, samarium, terbium, dysprosium, and erbium on three native plants (Asclepias syriaca L., Desmodium canadense (L. DC., Panicum virgatum L. and two crop species (Raphanus sativus L., Solanum lycopersicum L. in separate dose-response experiments under growth chamber conditions. Limited effects of REEs were found on seed germination and speed of germination. Effects on aboveground and belowground biomass were more pronounced, especially for the three native species, which were always more sensitive than the crop species tested. Inhibition concentrations (IC25 and IC50 causing 25 or 50% reductions in plant biomass respectively, were measured. For the native species, the majority of aboveground biomass IC25s (11 out of 18 fell within 100 to 300 mg REE/kg dry soil. In comparison to the native species, IC25s for the crops were always greater than 400 mg REE/kg, with the majority of results (seven out of 12 falling above 700 mg REE/kg. IC50s were often not detected for the crops. Root biomass of native species was also affected at lower doses than in crops. REE uptake by plants was higher in the belowground parts than in the above-ground plant tissues. Results also revealed that chloride may have contributed to the sensitivity of the native species, Desmodium canadense, one of the most sensitive species studied. Nevertheless, these results demonstrated that

  16. Effect of humic matter on metal adsorption onto clay materials: testing the linear additive model.

    Science.gov (United States)

    Lippold, Holger; Lippmann-Pipke, Johanna

    2009-10-13

    Migration of contaminants with low affinity for the aqueous phase is essentially governed by interaction with mobile carriers such as humic colloids. Their impact is, however, not sufficiently described by interaction constants alone since the humic carriers themselves are subject to a solid-liquid distribution that depends on geochemical parameters. In our study, co-adsorption of the REE terbium (as an analogue of trivalent actinides) and humic acid onto three clay materials (illite, montmorillonite, Opalinus clay) was investigated as a function of pH. (160)Tb(III) and (131)I-labelled humic acid were employed as radiotracers, allowing experiments at very low concentrations to mimic probable conditions in the far-field of a nuclear waste repository. Humate complexation of Tb was examined by anion and cation exchange techniques, also considering competitive effects of metals leached from the clay materials. The results revealed that desorption of metals from clay barriers, occurring in consequence of acidification processes, is generally counteracted in the presence of humic matter. For all clay materials under study, adsorption of Tb was found to be enhanced in neutral and acidic systems with humic acid, which is explained by additional adsorption of humic-bound Tb. A commonly used composite approach (linear additive model) was tested for suitability in reconstructing the solid-liquid distribution of Tb in ternary systems (Tb/humic acid/clay) on the basis of data determined for binary subsystems. The model can qualitatively explain the influence of humic acid as a function of pH, but it failed to reproduce our experimental data quantitatively. It appears that the elementary processes (metal adsorption, metal-humate complexation, humic acid adsorption) cannot be considered to be independent of each other. Possible reasons are discussed.

  17. Use of seaweeds for monitoring trace elements in coastal waters.

    Science.gov (United States)

    Jayasekera, R; Rossbach, M

    1996-06-01

    Concentrations of a wide range of trace elements: arsenic, cadmium, cobalt, chromium, hafnium, nickel, thorium, uranium, zinc and the rare earth elements, cerium, europium, samarium, terbium and ytterbium were determined by instrumental neutron activation analysis in the brown alga,Fucus vesiculosus from Eckwarder Hörne, North Sea and from Rügen, Baltic Sea. Another brown alga,Sargassum filipendula from Sri Lanka, Indian ocean (representing an unpolluted control station) was similarly investigated. Cobalt, chromium and nickel concentrations were highest inF. vesiculosus from the North Sea while zinc was highest in samples from the Baltic Sea, reflecting high levels of these elements in coastal waters of the North and the Baltic sea. Cadmium, cobalt, nickel and zinc levels were lowest inS. filipendula from Sri Lanka, probably demonstrating lower levels of those elements in coastal waters. Concentration levels of hafnium, thorium, uranium, and the rare earth elements were highest inS. filipendula. Two years later in 1994,S. filipendula along withUlva sp. (green alga) was resampled from the same sampling site, and in addition to the above elements, six other trace elements (Ag, Ba, Br, Rb, Se and Sr) were determined.Sargassium filipendula showed a particular affinity for Ag, As, Br and Sr. For the other elements, marginal concentration differences were observed betweenS. filipendula andUlva sp., probably reflecting the regional background levels. Substantially higher concentrations of Hf, Th, U, and the rare earths were found again in the 1994Sargassum andUlva samples, reflecting the effect of a substrate rich in rare earth elements. The brown algae used in this study may be used to monitor trace elements in coastal waters.

  18. A time-resolved luminescent competitive assay to detect L-selectin using aptamers as recognition elements

    Energy Technology Data Exchange (ETDEWEB)

    Cywiński, Piotr J., E-mail: piotr.cywinski@iap.fraunhofer.de [Functional Materials and Devices, Fraunhofer Institute for Applied Polymer Research, Geiselberstr.69, 14476 Potsdam-Golm (Germany); Department of Physical Chemistry, Institute of Chemistry, University of Potsdam, Karl-Liebknecht-Str. 24-25, 14476 Potsdam-Golm (Germany); Olejko, Lydia; Löhmannsröben, Hans-Gerd [Department of Physical Chemistry, Institute of Chemistry, University of Potsdam, Karl-Liebknecht-Str. 24-25, 14476 Potsdam-Golm (Germany)

    2015-08-05

    L-selectin is a protein with potential importance for numerous diseases and clinical disorders. In this paper, we present a new aptamer-based luminescent assay developed to detect L-selectin. The sensing system working principle is based on Förster Resonance Energy Transfer (FRET) from a donor terbium complex (TbC) to an acceptor cyanine dye (Cy5). In the present approach, the biotinylated aptamer is combined with Cy5-labelled streptavidin (Cy5-Strep) to yield an aptamer-based acceptor construct (Apta-Cy5-Strep), while L-selectin is conjugated using luminescent TbC. Upon aptamer binding to the TbC-labelled L-selectin (L-selectin-TbC), permanent donor-acceptor proximity is established which allows for radiationless energy transfer to occur. However, when unlabelled L-selectin is added, it competes with the L-selectin-TbC and the FRET signal decreases as the L-selectin concentration increases. FRET from the TbC to Cy5 was observed with time-gated time-resolved luminescence spectroscopy. A significant change in the corrected luminescence signal was observed in the dynamic range of 10–500 ng/mL L-selectin, the concentration range relevant for accelerated cognitive decline of Alzheimer's disease, with a limit of detection (LOD) equal to 10 ng/mL. The aptasensor-based assay is homogeneous and can be realized within one hour. Therefore, this method has the potential to become an alternative to tedious heterogeneous analytical methods, e.g. based on enzyme-linked immunosorbent assay (ELISA). - Highlights: • Tb-based FRET assay with aptamers toward a protein is presented for the first time. • L-selectin can be detected in concentrations relevant for the Alzheimer's Disease. • The assay can be realized in one hour with the LOD equal to 10 ng/ml.

  19. Artificial chemical and magnetic structure at the domain walls of an epitaxial oxide

    Science.gov (United States)

    Farokhipoor, S.; Magén, C.; Venkatesan, S.; Íñiguez, J.; Daumont, C. J. M.; Rubi, D.; Snoeck, E.; Mostovoy, M.; de Graaf, C.; Müller, A.; Döblinger, M.; Scheu, C.; Noheda, B.

    2014-11-01

    Progress in nanotechnology requires new approaches to materials synthesis that make it possible to control material functionality down to the smallest scales. An objective of materials research is to achieve enhanced control over the physical properties of materials such as ferromagnets, ferroelectrics and superconductors. In this context, complex oxides and inorganic perovskites are attractive because slight adjustments of their atomic structures can produce large physical responses and result in multiple functionalities. In addition, these materials often contain ferroelastic domains. The intrinsic symmetry breaking that takes place at the domain walls can induce properties absent from the domains themselves, such as magnetic or ferroelectric order and other functionalities, as well as coupling between them. Moreover, large domain wall densities create intense strain gradients, which can also affect the material's properties. Here we show that, owing to large local stresses, domain walls can promote the formation of unusual phases. In this sense, the domain walls can function as nanoscale chemical reactors. We synthesize a two-dimensional ferromagnetic phase at the domain walls of the orthorhombic perovskite terbium manganite (TbMnO3), which was grown in thin layers under epitaxial strain on strontium titanate (SrTiO3) substrates. This phase is yet to be created by standard chemical routes. The density of the two-dimensional sheets can be tuned by changing the film thickness or the substrate lattice parameter (that is, the epitaxial strain), and the distance between sheets can be made as small as 5 nanometres in ultrathin films, such that the new phase at domain walls represents up to 25 per cent of the film volume. The general concept of using domain walls of epitaxial oxides to promote the formation of unusual phases may be applicable to other materials systems, thus giving access to new classes of nanoscale materials for applications in nanoelectronics and

  20. Investigation of recovery and recycling of rare earth elements from waste fluorescent lamp phosphors

    Science.gov (United States)

    Eduafo, Patrick Max

    Characterization techniques and experimental measurements were used to evaluate a process for recycling rare earth elements (REEs) from spent fluorescent lamp phosphors. QEMSCAN analysis revealed that over 60% of the rare earth bearing minerals was less than 10 microm. A representative sample of the as-received feed contained 14.59 wt% total rare earth elements (TREE) and upon sieving to below 75 microm, the grade increased to 19.60 wt% REE with 98.75% recovery. Based on experimental work, a new process for extracting the chief REEs from end of life fluorescent lamps has been developed. The proposed flowsheet employs a three-stage leaching and precipitation process for selective extraction and recovery of the REEs. Hydrochloric acid was used as lixiviant in batch leach experiments on the phosphor powder. The maximum extraction obtained was 100% for both yttrium and europium under the following leaching conditions: 2.5 M HCl, 70°C, 1 hour, 180 g/L and 600 rpm. However, the solubility of cerium, lanthanum and terbium remained low at these conditions. Kinetic data of the leaching of yttrium and europium showed best fit to the logarithmic rate expression of the empirical model of leaching. Activation energy was calculated to be 77.49 kJ/mol for Y and 72.75 kJ/mol for Eu in the temperature range of 298 to 343 K. Precipitation tests demonstrate that at least 50% excess the stoichiometric amount of oxalic acid is needed to recover yttrium and europium efficiently to produce a pure (Y, Eu) mixed oxide. Total recovery of the REEs was achieved even at very low pH or without any base added. Over 99% pure mixed rare earth oxide at 99% recovery has been attained. An economic assessment of the developed process using operating and capital cost have be undertaken and based on the analysis of the three economic scenarios, two are economic and one is non-economic.

  1. Identification of lanthanum-specific peptides for future recycling of rare earth elements from compact fluorescent lamps.

    Science.gov (United States)

    Lederer, Franziska L; Curtis, Susan B; Bachmann, Stefanie; Dunbar, W Scott; MacGillivray, Ross T A

    2017-05-01

    As components of electronic scrap, rare earth minerals are an interesting but little used source of raw materials that are highly important for the recycling industry. Currently, there exists no cost-efficient technology to separate rare earth minerals from an electronic scrap mixture. In this study, phage surface display has been used as a key method to develop peptides with high specificity for particular inorganic targets in electronic scrap. Lanthanum phosphate doped with cerium and terbium as part of the fluorescent phosphors of spent compact fluorescent lamps (CFL) was used as a target material of economic interest to test the suitability of the phage display method to the separation of rare earth minerals. One random pVIII phage library was screened for peptide sequences that bind specifically to the fluorescent phosphor LaPO 4 :Ce 3+ ,Tb 3+ (LAP). The library contained at least 100 binding pVIII peptides per phage particle with a diversity of 1 × 10 9 different phage per library. After three rounds of enrichment, a phage clone containing the surface peptide loop RCQYPLCS was found to bind specifically to LAP. Specificity and affinity of the identified phage bound peptide was confirmed by using binding and competition assays, immunofluorescence assays, and zeta potential measurements. Binding and immunofluorescence assays identified the peptide's affinity for the fluorescent phosphor components CAT (CeMgAl 11 O 19 :Tb 3+ ) and BAM (BaMgAl 10 O 17 :Eu 2+ ). No affinity was found for other fluorescent phosphor components such as YOX (Y 2 O 3 :Eu 3+ ). The binding specificity of the RCQYPLCS peptide loop was improved 3-51-fold by using alanine scanning mutagenesis. The identification of peptides with high specificity and affinity for special components in the fluorescent phosphor in CFLs provides a potentially new strategic approach to rare earth recycling. Biotechnol. Bioeng. 2017;114: 1016-1024. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals

  2. Preparation of extraction resin for radio lanthanides separation; Preparacion de resina de extraccion para separacion de radiolantanidos

    Energy Technology Data Exchange (ETDEWEB)

    Cruz B, C.C. de la; Monroy G, F. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: delacruzbc@hotmail.com

    2008-07-01

    The present work presents the methodology that was developed for the preparation of one extractant resin with the aim of HDEHP, to separate radio lanthanides with serial atomic numbers. In this case it is exemplified with the separation of the following elements: Gadolinium-161 and the Terbium-161; this last radioisotope it is a beta emitting ({beta}{sup -}) that has a great potential to be used in therapy, also in nuclear medicine and in oncology, this is due to the high penetration power of their {beta}{sup -} particles that can kill to the cancerous cells and to inhibit the growth of the same ones. To be able to separate them it is necessary to appeal to extremely selective separation techniques, since the chemical properties of these elements are very similar. The chromatography is one of the more used analytical tools, this is due to its great sensibility and the selectivity in the compounds separation, in particular the use of the extractive chromatography has shown the feasibility of carrying out this type of separations for this type of elements. The resin with base of HDEHP was absorbed in an inert support under diverse preparation conditions. The extractant properties of the resin, in relation to the elements Gd and Tb (distribution coefficients), its were determined by means of the dynamic method, using as eluent solutions of nitric acid. The Gd-159 was prepared by irradiation of Gd-168 with thermal neutrons and the Tb-161 it is the result of the radioactive decay of the Gd-161 that is produced in turn with the irradiation with neutrons of Gd-160. The coefficients of distribution of Gd and Tb, using the prepared resin under diverse conditions are presented. (Author)

  3. TH-C-17A-07: Visualizing and Quantifying Radiation Therapy in Real-Time Using a Novel Beam Imaging Technique

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, C; Naczynski, D; Xing, L [Stanford University, Stanford, CA (United States)

    2014-06-15

    Purpose: Radiation therapy uses invisible high energy X-rays to treat an invisible tumor. Proper positioning of the treatment beam relative to the patient's anatomy during dose delivery is critically important to the success of treatment. We develop and characterize a novel radiation therapy beam visualization technique for real-time monitoring of patient treatment. Methods: Custom made flexible scintillator sheets were fabricated from gadolinium oxysulfide (GOS) particles that had been doped with terbium within a silicone elastomer matrix. Sheets of several thicknesses ranging from 0.3 to 1mm were prepared and tested. Sheets were exposed to megavoltage X-ray and electron beams from a Varian linac and the resulting optical signal was collected by multiple CMOS cameras placed in the treatment room. Real-time images were collected for different beam energies and dose rates. Signal intensity and SNR were calculated by processing the acquired images. Results: All signals were detectable in the presence of full room lighting and at an integration time of 45ms. Average signal intensity and SNR increased with both sheet thickness and dose rate and decreased with beam energy and incident light. For a given sheet thickness and beam energy the correlation between dose rate and signal intensity was highly linear. Increased sheet thickness or dose rate results in a linear increase in the detected signal. All results are consistent with analytical approximations. Conclusion: The technique offers a means of accurately visualizing a radiation therapy beam shape and fluence in real time. The effects of salient parameters have been characterized and will enable further optimization of the technique as it is implemented into the clinical workflow. The project described was supported by the National Center for Advancing Translational Sciences of the National Institutes of Health through UL1 TR001085.

  4. Experimental Observations on Material Damping at Cryogenic Temperatures

    Science.gov (United States)

    Peng, Chia-Yen; Levine, Marie; Shido, Lillian; Leland, Robert

    2004-01-01

    This paper describes a unique experimental facility designed to measure damping of materials at cryogenic temperatures for the Terrestrial Planet Finder (TPF) mission at the Jet Propulsion Laboratory. The test facility removes other sources of damping in the measurement by avoiding frictional interfaces, decoupling the test specimen from the support system, and by using a non-contacting measurement device. Damping data reported herein are obtained for materials (Aluminum, Aluminum/Terbium/Dysprosium, Titanium, Composites) vibrating in free-free bending modes with low strain levels (< 10(exp -6) ppm). The fundamental frequencies of material samples are ranged from 14 to 202 Hz. To provide the most beneficial data relevant to TPF-like precision optical space missions, the damping data are collected from room temperatures (around 293 K) to cryogenic temperatures (below 40 K) at unevenly-spaced intervals. More data points are collected over any region of interest. The test data shows a significant decrease in viscous damping at cryogenic temperatures. The cryogenic damping can be as low as 10(exp -4) %, but the amount of the damping decrease is a function of frequency and material. However, Titanium 15-3-3-3 shows a remarkable increase in damping at cryogenic temperatures. It demonstrates over one order of magnitude increase in damping in comparison to Aluminum 6061-T6. Given its other properties (e.g., good stiffness and low conductivity) this may prove itself to be a good candidate for the application on TPF. At room temperatures, the test data are correlated well with the damping predicted by the Zener theory. However, large discrepancies at cryogenic temperatures between the Zener theory and the test data are observed.

  5. A Multifunctional Tb-MOF for Highly Discriminative Sensing of Eu3+/Dy3+and as a Catalyst Support of Ag Nanoparticles.

    Science.gov (United States)

    Xu, Guo-Wang; Wu, Ya-Pan; Dong, Wen-Wen; Zhao, Jun; Wu, Xue-Qian; Li, Dong-Sheng; Zhang, Qichun

    2017-06-01

    Exploring novel multifunctional rare earth materials is very important because these materials have fundamental interests, such as new structural facts and connecting modes, as well as potential technological applications, including optics, magnetic properties, sorption, and catalytic behaviors. Especially, employing these nanomaterials for sensing or catalytic reactions is still very challenging. Herein, a new superstable, anionic terbium-metal-organic-framework, [H 2 N(CH 3 ) 2 ][Tb(cppa) 2 (H 2 O) 2 ], (China Three Gorges University (CTGU-1), H 2 cppa = 5-(4-carboxyphenyl)picolinic acid), is successfully prepared, which can be used as a turn-on, highly-sensitive fluorescent sensor to detect Eu 3+ and Dy 3+ , with a detection limitation of 5 × 10 -8 and 1 × 10 -4 m in dimethylformamide, respectively. This result represents the first example of lanthanide-metal-organic-frameworks (Ln-MOF) that can be employed as a discriminative fluorescent probe to recognize Eu 3+ and Dy 3+ . In addition, through ion exchanging at room temperature, Ag(I) can be readily reduced in situ and embedded in the anionic framework, which leads to the formation of nanometal-particle@Ln-MOF composite with uniform size and distribution. The as-prepared Ag@CTGU-1 shows remarkable catalytic performance to reduce 4-nitrophenol, with a reduction rate constant κ as large as 2.57 × 10 -2 s -1 ; almost the highest value among all reported noble-metal-nanoparticle@MOF composites. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Lanthanide-based laser-induced phosphorescence for spray diagnostics

    Science.gov (United States)

    van der Voort, D. D.; Maes, N. C. J.; Lamberts, T.; Sweep, A. M.; van de Water, W.; Kunnen, R. P. J.; Clercx, H. J. H.; van Heijst, G. J. F.; Dam, N. J.

    2016-03-01

    Laser-induced phosphorescence (LIP) is a relatively recent and versatile development for studying flow dynamics. This work investigates certain lanthanide-based molecular complexes for their use in LIP for high-speed sprays. Lanthanide complexes in solutions have been shown to possess long phosphorescence lifetimes (˜1-2 ms) and to emit light in the visible wavelength range. In particular, europium and terbium complexes are investigated using fluorescence/phosphorescence spectrometry, showing that europium-thenoyltrifluoracetone-trioctylphosphineoxide (Eu-TTA-TOPO) can be easily and efficiently excited using a standard frequency-tripled Nd:YAG laser. The emitted spectrum, with maximum intensity at a wavelength of 614 nm, is shown not to vary strongly with temperature (293-383 K). The decay constant of the phosphorescence, while independent of ambient pressure, decreases by approximately 12 μs/K between 323 and 373 K, with the base level of the decay constant dependent on the used solvent. The complex does not luminesce in the gas or solid state, meaning only the liquid phase is visualized, even in an evaporating spray. By using an internally excited spray containing the phosphorescent complex, the effect of vaporization is shown through the decrease in measured intensity over the length of the spray, together with droplet size measurements using interferometric particle imaging. This study shows that LIP, using the Eu-TTA-TOPO complex, can be used with different solvents, including diesel surrogates. Furthermore, it can be easily handled and used in sprays to investigate spray breakup and evaporation.

  7. Lanthanide-based laser-induced phosphorescence for spray diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Voort, D. D. van der, E-mail: d.d.v.d.voort@tue.nl; Water, W. van de; Kunnen, R. P. J.; Clercx, H. J. H.; Heijst, G. J. F. van [Applied Physics Department, Eindhoven University of Technology, 5612 AZ Eindhoven (Netherlands); Maes, N. C. J.; Sweep, A. M.; Dam, N. J. [Mechanical Engineering Department, Eindhoven University of Technology, 5612 AZ Eindhoven (Netherlands); Lamberts, T. [Institute of Theoretical Chemistry, University of Stuttgart, D-70569 Stuttgart (Germany)

    2016-03-15

    Laser-induced phosphorescence (LIP) is a relatively recent and versatile development for studying flow dynamics. This work investigates certain lanthanide-based molecular complexes for their use in LIP for high-speed sprays. Lanthanide complexes in solutions have been shown to possess long phosphorescence lifetimes (∼1-2 ms) and to emit light in the visible wavelength range. In particular, europium and terbium complexes are investigated using fluorescence/phosphorescence spectrometry, showing that europium-thenoyltrifluoracetone-trioctylphosphineoxide (Eu-TTA-TOPO) can be easily and efficiently excited using a standard frequency-tripled Nd:YAG laser. The emitted spectrum, with maximum intensity at a wavelength of 614 nm, is shown not to vary strongly with temperature (293-383 K). The decay constant of the phosphorescence, while independent of ambient pressure, decreases by approximately 12 μs/K between 323 and 373 K, with the base level of the decay constant dependent on the used solvent. The complex does not luminesce in the gas or solid state, meaning only the liquid phase is visualized, even in an evaporating spray. By using an internally excited spray containing the phosphorescent complex, the effect of vaporization is shown through the decrease in measured intensity over the length of the spray, together with droplet size measurements using interferometric particle imaging. This study shows that LIP, using the Eu-TTA-TOPO complex, can be used with different solvents, including diesel surrogates. Furthermore, it can be easily handled and used in sprays to investigate spray breakup and evaporation.

  8. The ubiquitous DOTA and its derivatives: the impact of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid on biomedical imaging.

    Science.gov (United States)

    Stasiuk, Graeme J; Long, Nicholas J

    2013-04-07

    Over the last twenty-five years 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA) has made a significant impact on the field of diagnostic imaging. DOTA is not the only metal chelate in use in medical diagnostics, but it is the only one to significantly impact on all of the major imaging modalities Magnetic Resonance (MR), Positron Emission Tomography (PET), Single Photon Emission Computed Tomography (SPECT), and Fluorescence imaging. This crossover of modalities has been possible due to the versatility of DOTA firstly, to complex a variety of metal ions and secondly, the ease with which it can be modified for different disease states. This has driven research over the last two decades into the chemistry of DOTA and the modification of the substituent pendant arms of this macrocycle to create functional, targeted and dual-modal imaging agents. The primary use of DOTA has been with the lanthanide series of metals, gadolinium for MRI, europium and terbium for fluorescence and neodymium for near infra-red imaging. There are now many research groups dedicated to the use of lanthanides with DOTA although other chelates such as DTPA and NOTA are being increasingly employed. The ease with which DOTA can be conjugated to peptides has given rise to targeted imaging agents seen in the PET, SPECT and radiotherapy fields. These modalities use a variety of radiometals that complex with DOTA, e.g.(64)Cu and (68)Ga which are used in clinical PET scans, (111)In, and (90)Y for SPECT and radiotherapy. In this article, we will demonstrate the remarkable versatility of DOTA, how it has crossed the imaging modality boundaries and how it has been successfully transferred into the clinic.

  9. Chiral recognition of proteins having L-histidine residues on the surface with lanthanide ion complex incorporated-molecularly imprinted fluorescent nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Uzun, Lokman, E-mail: lokman@hacettepe.edu.tr [Hacettepe University, Department of Chemistry, 06381, Ankara (Turkey); Uzek, Recep; Şenel, Serap [Hacettepe University, Department of Chemistry, 06381, Ankara (Turkey); Say, Ridvan [Anadolu University, Department of Chemistry, 26470, Eskisehir (Turkey); Denizli, Adil [Hacettepe University, Department of Chemistry, 06381, Ankara (Turkey)

    2013-08-01

    In this study, lanthanide ion complex incorporated molecularly imprinted fluorescent nanoparticles were synthesized. A combination of three novel approaches was applied for the purpose. First, lanthanide ions [Terbium(III)] were complexed with N-methacryloyl-L-histidine (MAH), polymerizable derivative of L-histidine amino acid, in order to incorporate the complex directly into the polymeric backbone. At the second stage, L-histidine molecules imprinted nanoparticles were utilized instead of whole protein imprinting in order to avoid whole drawbacks such as fragility, complexity, denaturation tendency, and conformation dependency. At the third stage following the first two steps mentioned above, imprinted L-histidine was coordinated with cupric ions [Cu(II)] to conduct the study under mild conditions. Then, molecularly imprinted fluorescent nanoparticles synthesized were used for L-histidine adsorption from aqueous solution to optimize conditions for adsorption and fluorimetric detection. Finally, usability of nanoparticles was investigated for chiral biorecognition using stereoisomer, D-histidine, racemic mixture, D,L-histidine, proteins with surface L-histidine residue, lysozyme, cytochrome C, or without ribonuclease A. The results revealed that the proposed polymerization strategy could make significant contribution to the solution of chronic problems of fluorescent component introduction into polymers. Additionally, the fluorescent nanoparticles reported here could be used for selective separation and fluorescent monitoring purposes. Highlights: • Lanthanide ion complex incorporated molecularly imprinted fluorescent nanoparticles • Direct incorporation of the fluorescent complex into polymeric backbone. • Imprinting by assistance of cupric ion coordination into nanoparticles • Evaluation of the chiral biorecognition ability of nanoparticles • Simultaneous selective separation and fluorescent monitoring.

  10. Effect of humic matter on metal adsorption onto clay materials: Testing the linear additive model

    Science.gov (United States)

    Lippold, Holger; Lippmann-Pipke, Johanna

    2009-10-01

    Migration of contaminants with low affinity for the aqueous phase is essentially governed by interaction with mobile carriers such as humic colloids. Their impact is, however, not sufficiently described by interaction constants alone since the humic carriers themselves are subject to a solid-liquid distribution that depends on geochemical parameters. In our study, co-adsorption of the REE terbium (as an analogue of trivalent actinides) and humic acid onto three clay materials (illite, montmorillonite, Opalinus clay) was investigated as a function of pH. 160Tb(III) and 131I-labelled humic acid were employed as radiotracers, allowing experiments at very low concentrations to mimic probable conditions in the far-field of a nuclear waste repository. Humate complexation of Tb was examined by anion and cation exchange techniques, also considering competitive effects of metals leached from the clay materials. The results revealed that desorption of metals from clay barriers, occurring in consequence of acidification processes, is generally counteracted in the presence of humic matter. For all clay materials under study, adsorption of Tb was found to be enhanced in neutral and acidic systems with humic acid, which is explained by additional adsorption of humic-bound Tb. A commonly used composite approach (linear additive model) was tested for suitability in reconstructing the solid-liquid distribution of Tb in ternary systems (Tb/humic acid/clay) on the basis of data determined for binary subsystems. The model can qualitatively explain the influence of humic acid as a function of pH, but it failed to reproduce our experimental data quantitatively. It appears that the elementary processes (metal adsorption, metal-humate complexation, humic acid adsorption) cannot be considered to be independent of each other. Possible reasons are discussed.

  11. Water quality and quantity of selected springs and seeps along the Colorado River corridor, Utah and Arizona: Arches National Park, Canyonlands National Park, Glen Canyon National Recreation Area, and Grand Canyon National Park, 1997-98

    Science.gov (United States)

    Taylor, Howard E.; Spence, John R.; Antweiler, Ronald C.; Berghoff, Kevin; Plowman, Terry I.; Peart, Dale B.; Roth, David A.

    2004-01-01

    The U.S. Geological Survey, in cooperation with the National Park Service conducted an intensive assessment of selected springs along the Colorado River Corridor in Arches National Park, Canyonlands National Park, Glen Canyon National Recreation Area, and Grand Canyon National Park in 1997 and 1998, for the purpose of measuring and evaluating the water quality and quantity of the resource. This study was conducted to establish baseline data for the future evaluation of possible effects from recreational use and climate change. Selected springs and seeps were visited over a study period from 1997 to 1998, during which, discharge and on-site chemical measurements were made at selected springs and seeps, and samples were collected for subsequent chemical laboratory analysis. This interdisciplinary study also includes simultaneous studies of flora and fauna, measured and sampled coincidently at the same sites. Samples collected during this study were transported to U.S. Geological Survey laboratories in Boulder, Colorado, where analyses were performed using state-of-the-art laboratory technology. The location of the selected springs and seeps, elevation, geology, aspect, and onsite measurements including temperature, discharge, dissolved oxygen, pH, and specific conductance, were recorded. Laboratory analyses include determinations for alkalinity, aluminum, ammonium (nitrogen), antimony, arsenic, barium, beryllium, bismuth, boron, bromide, cadmium, calcium, cerium, cesium, chloride, chromium, cobalt, copper, dissolved inorganic carbon, dissolved organic carbon, dysprosium, erbium, europium, fluoride, gadolinium, holmium, iodine, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, mercury, molybdenum, neodymium, nickel, nitrate (nitrogen), nitrite (nitrogen), phosphate, phosphorus, potassium, praseodymium, rhenium, rubidium, samarium, selenium, silica, silver, sodium, strontium, sulfate, tellurium, terbium, thallium, thorium, thulium, tin, titanium, tungsten

  12. Influence of annealing temperature on structural and optical properties of Lu{sub 2}O{sub 3}:Eu{sup 3+}, Tb{sup 3+} transparent films

    Energy Technology Data Exchange (ETDEWEB)

    Morales-Ramírez, Ángel de Jesús [Instituto Politécnico Nacional, CIITEC IPN, Cerrada de Cecati S/N, 02250 México D.F. (Mexico); García-Murillo, Antonieta, E-mail: angarciam@ipn.mx [Instituto Politécnico Nacional, CIITEC IPN, Cerrada de Cecati S/N, 02250 México D.F. (Mexico); Carrillo-Romo, Felipe de Jesús [Instituto Politécnico Nacional, CIITEC IPN, Cerrada de Cecati S/N, 02250 México D.F. (Mexico); Garrido-Hernández, Aristeo [Instituto Politécnico Nacional, CIITEC IPN, Cerrada de Cecati S/N, 02250 México D.F. (Mexico); Universidad Tecnológica de Tecámac, División de Nanotecnología, Carretera Federal México- Pachuca Km 37.5, Sierra Hermosa, 55740, Edo. De México (Mexico); García-Hernández, Margarita [Universidad Autónoma Metropolitana, Departamento de Ciencias Naturales, Unidad Cuajimalpa, Pedro Antonio de los Santos 84, 11850 México D.F. (Mexico)

    2015-10-15

    Highlights: • Lu{sub 2}O{sub 3}:Eu{sup 3+}, Tb{sup 3+} films were synthesized by sol–gel and by dip-coating technique. • Effects of annealing treatment on structural and optical properties were studied. • Optogeometrical characteristics of synthesized films were analyzed. • X-ray diffraction results showed that Lu{sub 2}O{sub 3}:Eu{sup 3+}, Tb{sup 3+} crystallizes at 700 °C. • High reddish emission on transparent films with at least 1 μm thick was observed. - Abstract: High-optical quality Lu{sub 2}O{sub 3}:Eu{sup 3+} 5 mol%, X Tb{sup 3+} (X = 0–0.04 mol%) thin films were prepared by the sol–gel process and dip-coating technique. The procedure was as follows: lutetium, europium and terbium nitrates were used as precursors, and ethanol as a solvent. Etylenglycol (EG) was added as a sol stabilizer, and the pH was adjusted by acetic acid. After 10 dipping-cycles, followed by an annealing process (600–900 °C) for 1 h, transparent, smooth and crack-free films (ra = 8–9 nm) were formed. The X-ray diffraction (XRD) results showed crystallized films into the cubic structure at 800 °C. The ellipsometry results showed that the thickness of the films varied from 1 to 1.4 μm at 1000 and 600 °C, respectively. Finally, the films presented a typical Eu{sup 3+} red emission at 611 nm ({sup 5}D{sub 0} → {sup 7}F{sub 2}); furthermore, the effect of the Tb{sup 3+} content showed that the highest emission intensity corresponded to the lower Tb{sup 3+} content.

  13. Selected trace elements in the Sacramento River, California: occurrence and distribution.

    Science.gov (United States)

    Taylor, H E; Antweiler, R C; Roth, D A; Alpers, C N; Dileanis, P

    2012-05-01

    The impact of trace elements from the Iron Mountain Superfund site on the Sacramento River and selected tributaries is examined. The concentration and distribution of many trace elements-including aluminum, arsenic, boron, barium, beryllium, bismuth, cadmium, cerium, cobalt, chromium, cesium, copper, dysprosium, erbium, europium, iron, gadolinium, holmium, potassium, lanthanum, lithium, lutetium, manganese, molybdenum, neodymium, nickel, lead, praseodymium, rubidium, rhenium, antimony, selenium, samarium, strontium, terbium, thallium, thulium, uranium, vanadium, tungsten, yttrium, ytterbium, zinc, and zirconium-were measured using a combination of inductively coupled plasma-mass spectrometry and inductively coupled plasma-atomic emission spectrometry. Samples were collected using ultraclean techniques at selected sites in tributaries and the Sacramento River from below Shasta Dam to Freeport, California, at six separate time periods from mid-1996 to mid-1997. Trace-element concentrations in dissolved (ultrafiltered [0.005-μm pore size]) and colloidal material, isolated at each site from large volume samples, are reported. For example, dissolved Zn ranged from 900 μg/L at Spring Creek (Iron Mountain acid mine drainage into Keswick Reservoir) to 0.65 μg/L at the Freeport site on the Sacramento River. Zn associated with colloidal material ranged from 4.3 μg/L (colloid-equivalent concentration) in Spring Creek to 21.8 μg/L at the Colusa site on the Sacramento River. Virtually all of the trace elements exist in Spring Creek in the dissolved form. On entering Keswick Reservoir, the metals are at least partially converted by precipitation or adsorption to the particulate phase. Despite this observation, few of the elements are removed by settling; instead the majority is transported, associated with colloids, downriver, at least to the Bend Bridge site, which is 67 km from Keswick Dam. Most trace elements are strongly associated with the colloid phase going

  14. Dynamics of metal-humate complexation equilibria as revealed by isotope exchange studies - a matter of concentration and time

    Science.gov (United States)

    Lippold, Holger; Eidner, Sascha; Kumke, Michael U.; Lippmann-Pipke, Johanna

    2017-01-01

    Complexation with dissolved humic matter can be crucial in controlling the mobility of toxic or radioactive contaminant metals. For speciation and transport modelling, a dynamic equilibrium process is commonly assumed, where association and dissociation run permanently. This is, however, questionable in view of reported observations of a growing resistance to dissociation over time. In this study, the isotope exchange principle was employed to gain direct insight into the dynamics of the complexation equilibrium, including kinetic inertisation phenomena. Terbium(III), an analogue of trivalent actinides, was used as a representative of higher-valent metals. Isotherms of binding to (flocculated) humic acid, determined by means of 160Tb as a radiotracer, were found to be identical regardless of whether the radioisotope was introduced together with the bulk of stable 159Tb or subsequently after pre-equilibration for up to 3 months. Consequently, there is a permanent exchange of free and humic-bound Tb since all available binding sites are occupied in the plateau region of the isotherm. The existence of a dynamic equilibrium was thus evidenced. There was no indication of an inertisation under these experimental conditions. If the small amount of 160Tb was introduced prior to saturation with 159Tb, the expected partial desorption of 160Tb occurred at much lower rates than observed for the equilibration process in the reverse procedure. In addition, the rates decreased with time of pre-equilibration. Inertisation phenomena are thus confined to the stronger sites of humic molecules (occupied at low metal concentrations). Analysing the time-dependent course of isotope exchange according to first-order kinetics indicated that up to 3 years are needed to attain equilibrium. Since, however, metal-humic interaction remains reversible, exchange of metals between humic carriers and mineral surfaces cannot be neglected on the long time scale to be considered in predictive

  15. Dissolved rare earth elements in the central-western sector of the Ross Sea, Southern Ocean: Geochemical tracing of seawater masses.

    Science.gov (United States)

    Turetta, Clara; Barbaro, Elena; Capodaglio, Gabriele; Barbante, Carlo

    2017-09-01

    The present essay contributes to the existing literature on rare earth elements (REEs) in the southern hemisphere by presenting the first data, to our knowledge, on the vertical profiles of dissolved REEs in 71 samples collected in the central-western sector of the Ross Sea (Southern Ocean-SO). The REEs were measured in the water samples collected during the 2002-2003 and 2005-2006 austral summers. 4 samples were collected and analysed in the framework of a test experiment, as part of the WISSARD Project (Whillans Ice Stream Subglacial Access Research Drilling). Our results show significant differences between the REE patterns of the main water masses present in the SO: we could observe specific signature in the High Salinity Shelf Water (HSSW), Ice Shelf Water (ISW) and Low Salinity Shelf Water (LSSW). A significant increase in Terbium (Tb) concentration was observed in the HSSW and ISW, the two principal water masses contributing to the formation of Antarctic Bottom Water (AABW) in the Ross Sea area, and in LSSW. Some of the HSSW samples show enrichment in Neodymium (Nd). Dissolved REE could therefore be used as tracers to understand the deep circulation of the SO (Pacific sector). We hypothesize that: (I) the characteristic dissolved REE pattern may derive from the composition of source area and from the hydrothermal activity of the central-western area of the Ross Sea; (II) the Tb anomaly observed in the AABW on the South Australian platform could be partially explained by the contribution of AABW generated in the Ross Sea region. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. EUV spectra of Gd and Tb ions excited in laser-produced and vacuum spark plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Churilov, S S; Kildiyarova, R R; Ryabtsev, A N; Sadovsky, S V [Establishment of the Russian Academy of Sciences Institute of Spectroscopy RAS, Troitsk, Moscow region 142190 (Russian Federation)], E-mail: ryabtsev@isan.troitsk.ru

    2009-10-15

    Extreme UV spectra of the gadolinium and terbium ions excited in the laser-produced plasma and vacuum spark sources were recorded in the 40-120 A region and investigated on the basis of the Hartree-Fock calculations using Cowan code. The intense peaks in the 65-75 A region of the vacuum spark spectra were interpreted as a manifold of the 4d{sup 10}4f{sup m}-4d{sup 9}4f{sup m+1} transitions in the ions with a partially filled 4f shell. The drastic narrowing of these peaks was observed in the spectra of the laser-produced plasma. It was explained by a change of the 4d{sup 10}4f{sup m}-4d{sup 9}4f{sup m+1} (m>2) transition arrays mostly contributing to the intensity of the peaks in the vacuum spark spectra for the 4-4 transitions in the simplest spectra of the 4p{sup 6}4d{sup k} (k=8-10) and 4d{sup 10}4f{sup m} (m=1-2) ground configuration ions predominantly excited in hotter laser-produced plasma. The most intense lines of the 4d{sup 10}4f{sup 2}-4d{sup 10}4f5d transitions in the Gd XVII and Tb XVIII spectra were classified for the first time.

  17. Novel applications of diagnostic x-rays in activating photo-agents through x-ray induced visible luminescence from rare-earth particles: an in vitro study

    Science.gov (United States)

    Abliz, Erkinay; Collins, Joshua E.; Friedberg, Joseph S.; Kumar, Ajith; Bell, Howard; Waynant, Ronald W.; Tata, Darrell B.

    2010-02-01

    Photodynamic agents such as Photofrin II (Photo II) utilized in photodynamic therapy (PDT) possess a remarkable property to become preferentially retained within the tumor's micro-environment. Upon the photo-agent's activation through visible light photon absorption, the agents exert their cellular cytotoxicity through type II and type I mechanistic pathways through extensive generation of reactive oxygen species (ROS): singlet oxygen 1O2, superoxide anion O2 -, and hydrogen peroxide H2O2, within the intratumoral environment. Unfortunately, due to shallow visible light penetration depth (~2mm to 5mm) in tissues, the PDT strategy currently has largely been restricted to the treatments of surface tumors, such as the melanomas. Additional invasive strategies through optical fibers are currently utilized in getting the visible light into the intended deep seated targets within the body for PDT. In this communication, we report on a novel strategy in utilizing "soft" energy diagnostic X-rays to indirectly activate Photo II through X-ray induced luminescence from Gadolinium oxysulfide (20 micron dimension) particles doped with Terbium: Gd2O2S:Tb. X-ray induced visible luminescence from Gd2O2S:Tb particles was spectroscopically characterized and the ROS production levels from clinically relevant concentration (10 μg/ml) of Photo II was quantified through changes in the Vitamin C absorbance. ROS kinetics through X-ray induced luminescence was found to be similar to the ROS kinetics from red He-Ne laser exposures used in the clinics. Taken together, in-vitro findings herein provide the basis for future studies in determining the safety and efficacy of this non-invasive X-ray induced luminescence strategy in activating photo-agent in deep seated tumors.

  18. Sensitization of Eriochromeazurol-B in Presence of Cetyldimethylethylammonium Bromide for the Microdetermination of Some Lanthanides

    Directory of Open Access Journals (Sweden)

    Anil B. Zade

    2012-01-01

    Full Text Available Cetyldimethylethylammonium bromide, a cationic surfactant has been used to decolorize eriochromeazurol B, an anionic triphenylmethane type of dye. Addition of specific lanthanide metal ion to this decolorized solution resulted into intense colored stable ternary complex with large bathochromic shift from 540 nm (binary complex to 650 nm (ternary complex with increase in absorbance values at shifted wavelength. CDMEAB thus decreases the color intensity of ECAB and increases the absorbance value of ternary complexes. This two fold advantage resulted into enhancement in molar absorptivities and sensitivities at shifted wavelength of ternary complexes with stoichiometric composition 1:(1:32, [Ln : (R:S] for all lanthanides understudy namely yttrium, neodymium, europium, terbium and ytterbium. The ternary complexes at pH 6.0 exhibited absorption maxima at 650 nm with molar absorptivities 69000 L.mol-1.cm-2 for Y(III, 66000 L.mol-1.cm-2 for Nd(III, 69000 L.mol-1.cm-2 for Eu(III, 64000 L.mol-1.cm-2 for Tb(III, 70000 L.mol-1.cm-2 for Yb(III. Beer's law were obeyed in concentration range 0.11-0.94, 0.19-1.53, 0.2-1.41, 0.21-1.69 and 0.23-1.11 ppm for Y(III, Nd(III, Eu(III, Tb(III and Yb(III respectively. Conditional formation constants and various analytical parameters have been evaluated and compared the results of newly formed ternary complexes with binary complexes. Finally newly suggested modified method have been recommended for the microdetermination of lanthanides understudy.

  19. Structural, spectroscopic and cytotoxicity studies of TbF{sub 3}@CeF{sub 3} and TbF{sub 3}@CeF{sub 3}@SiO{sub 2} nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Grzyb, Tomasz; Runowski, Marcin [Adam Mickiewicz University, Department of Rare Earths, Faculty of Chemistry (Poland); Dabrowska, Krystyna [Polish Academy of Sciences, Bacteriophage Laboratory, Institute of Immunology and Experimental Therapy (Poland); Giersig, Michael; Lis, Stefan, E-mail: blis@amu.edu.pl [Adam Mickiewicz University, Department of Rare Earths, Faculty of Chemistry (Poland)

    2013-10-15

    Terbium fluoride nanocrystals, covered by a shell, composed of cerium fluoride were synthesized by a co-precipitation method. Their complex structure was formed spontaneously during the synthesis. The surface of these core/shell nanocrystals was additionally modified by silica. The properties of TbF{sub 3}@CeF{sub 3} and TbF{sub 3}@CeF{sub 3}@SiO{sub 2} nanocrystals, formed in this way, were investigated. Spectroscopic studies showed that the differences between these two groups of products resulted from the presence of the SiO{sub 2} shell. X-ray diffraction patterns confirmed the trigonal crystal structure of TbF{sub 3}@CeF{sub 3} nanocrystals. High resolution transmission electron microscopy in connection with energy-dispersive X-ray spectroscopy showed a complex structure of the formed nanocrystals. Crystallized as small discs, 'the products', with an average diameter around 10 nm, showed an increase in the concentration of Tb{sup 3+} ions from surface to the core of nanocrystals. In addition to photo-physical analyses, cytotoxicity studies were performed on HSkMEC (Human Skin Microvascular Endothelial Cells) and B16F0 mouse melanoma cancer cells. The cytotoxicity of the nanomaterials was neutral for the investigated cells with no toxic or antiproliferative effect in the cell cultures, either for normal or for cancer cells. This fact makes the obtained nanocrystals good candidates for biological applications and further modifications of the SiO{sub 2} shell.Graphical Abstract.

  20. Tb3+-cleavage assays reveal specific Mg2+ binding sites necessary to pre-fold the btuB riboswitch for AdoCbl binding

    Science.gov (United States)

    Choudhary, Pallavi K.; Gallo, Sofia; Sigel, Roland K. O.

    2017-03-01

    Riboswitches are RNA elements that bind specific metabolites in order to regulate the gene expression involved in controlling the cellular concentration of the respective molecule or ion. Ligand recognition is mostly facilitated by Mg2+ mediated pre-organization of the riboswitch to an active tertiary fold. To predict these specific Mg2+ induced tertiary interactions of the btuB riboswitch from E. coli, we here report Mg2+ binding pockets in its aptameric part in both, the ligand-free and the ligand-bound form. An ensemble of weak and strong metal ion binding sites distributed over the entire aptamer was detected by terbium(III) cleavage assays, Tb3+ being an established Mg2+ mimic. Interestingly many of the Mn+ (n = 2 or 3) binding sites involve conserved bases within the class of coenzyme B12-binding riboswitches. Comparison with the published crystal structure of the coenzyme B12 riboswitch of S. thermophilum aided in identifying a common set of Mn+ binding sites that might be crucial for tertiary interactions involved in the organization of the aptamer. Our results suggest that Mn+ binding at strategic locations of the btuB riboswitch indeed facilitates the assembly of the binding pocket needed for ligand recognition. Binding of the specific ligand, coenzyme B12 (AdoCbl), to the btuB aptamer does however not lead to drastic alterations of these Mn+ binding cores, indicating the lack of a major rearrangement within the three-dimensional structure of the RNA. This finding is strengthened by Tb3+ mediated footprints of the riboswitch's structure in its ligand-free and ligand-bound state indicating that AdoCbl indeed induces local changes rather than a global structural rearrangement.

  1. Improvement of routes and production of CaSO{sub 4}-based dosimeters with unusual doping; Aprimoramento de rotas e producao de dosimetros a base de CaSO{sub 4} com dopagens nao usuais

    Energy Technology Data Exchange (ETDEWEB)

    Junot, Danilo Oliveira

    2017-07-01

    The widespread use of ionizing radiation in medicine and industry, associated with the known risks that this type of radiation can cause, has motivated the search for new radiation detectors, seeking improvements in the dosimetric characteristics and in the cost of production in comparison with commercial dosimeters disseminated. The motivation of this work is, therefore, to produce new thermoluminescent detectors through improved routes. Unusual elements in CaSO{sub 4} matrix doping, such as terbium (Tb) and ytterbium (Yb), were used as dopants in this matrix, as well as the europium (Eu), the thulium (Tm) and the silver (Ag), resulting in samples of CaSO{sub 4}:Eu,Tb, CaSO{sub 4}:Tb,Yb, CaSO{sub 4}:Tm,Ag and CaSO{sub 4}:Eu,Ag that were prepared by means of an adaptation of the method developed by Yamashita (1971). The route of synthesis is based on the mixture of calcium carbonate (CaCO{sub 3}) and dopant oxide (except for silver, incorporated in the form of metallic nanoparticles) in a solution of sulfuric acid. The mixture is heated until all the acid evaporates and only the powder of the material remains. In this route, the sulfuric acid is collected and can be reused. The phosphors produced were characterized by X-ray diffraction and radioluminescence techniques. The silver particles, produced by the polyol method, were characterized by scanning electron microscopy. Composites were obtained from the addition of Teflon to the phosphors. The thermoluminescence (TL) and the optically stimulated luminescence (OSL) of the new materials produced were investigated. Thermoluminescent characteristics such as sensitivity, linearity, reproducibility, minimum detectable dose, kinetic order and fading were evaluated and discussed. The CaSO{sub 4}:Tb,Eu composites showed TL glow curves with peaks at temperatures of 170 °C, 270 °C and 340 °C. The CaSO{sub 4}:Tb,Yb composites presented TL glow curves with peaks at temperatures of 90 °C, 160 °C, 240 °C and 340 °C. Ca

  2. Tb{sup 3+} doped Zinc Alumino Bismuth Borate glasses for green emitting luminescent devices

    Energy Technology Data Exchange (ETDEWEB)

    Swapna, K.; Mahamuda, Sk. [Department of Physics, K L University, Green Fields, Vaddeswaram, Guntur (Dt), Andhra Pradesh 522502 (India); Rao, A. Srinivasa, E-mail: drsrallam@gmail.com [Department of Physics, K L University, Green Fields, Vaddeswaram, Guntur (Dt), Andhra Pradesh 522502 (India); Department of Applied Physics, Delhi Technological University, Bawana Road, New Delhi 110042 (India); Jayasimhadri, M. [Department of Applied Physics, Delhi Technological University, Bawana Road, New Delhi 110042 (India); Shakya, Suman; Prakash, G. Vijaya [Nanophotonics Laboratory, Department of Physics, Indian Institute of Technology-Delhi, Hauz Khas, New Delhi 110016 (India)

    2014-12-15

    Zinc Alumino Bismuth Borate (ZnAlBiB) glasses doped with terbium (Tb{sup 3+}) ions with a chemical composition 20ZnO–10Al{sub 2}O{sub 3}–(10−x)Bi{sub 2}O{sub 3}–60B{sub 2}O{sub 3}−xTb{sub 2}O{sub 3} (x=0.1, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0 mol%) were prepared by a conventional melt quenching method and studied their optical absorption, photoluminescence and decay spectral properties. The Judd–Ofelt (J–O) parameters evaluated from the experimental oscillator strengths were used to measure the radiative properties for the prominent luminescent transitions of Tb{sup 3+} ions such as {sup 5}D{sub 4}→{sup 7}F{sub 6}, {sup 7}F{sub 5}, {sup 7}F{sub 4} and {sup 7}F{sub 3.} The effect of Tb{sup 3+} ion concentration on the luminescence process observed in the visible region was discussed in detail. The emission spectra recorded for all the ZnAlBiB glasses doped with Tb{sup 3+} ions, show an intense peak in green region at 542 nm. The stimulated emission cross-section, branching ratios and quantum efficiency values evaluated for green emission ({sup 5}D{sub 4}→{sup 7}F{sub 5}) suggests the utility of these glasses for green luminescence applications. It was found that, within the concentration range investigated, 2.5 mol% of Tb{sup 3+} doped ZnAlBiB glass is most suitable for green luminescence applications at 542 nm in principle. - Highlights: • ZnAlBiB glasses doped with Tb{sup 3+} ions were prepared by a conventional melt quenching technique. • Judd–Ofelt and radiative properties are measured from the emission spectra. • Quantum efficiency of the ZnAlBiB glasses is measured by using radiative and measured lifetimes. • CIE Chromaticity co-ordinates are evaluated from emission spectra.

  3. High quantum efficiency megavoltage imaging with thick scintillator detectors for image guided radiation therapy

    Science.gov (United States)

    Gopal, Arun

    In image guided radiation therapy (IGRT), imaging devices serve as guidance systems to aid patient set-up and tumor volume localization. Traditionally, 2-D megavoltage x-ray imagers, referred to as electronic portal imaging devices (EPIDs), have been used for planar target localization, and have recently been extended to perform 3-D volumetric reconstruction via cone-beam computed tomography (CBCT). However, current EPIDs utilize thin and inefficient phosphor screen detectors and are subsequently limited by poor soft tissue visualization, which limits their use for CBCT. Therefore, the use of thick scintillation media as megavoltage x-ray detectors for greater x-ray sensitivity and enhanced image quality has recently been of significant interest. In this research, two candidates for thick scintillators: CsI(Tl) and terbium doped scintillation glass were investigated in separate imaging configurations. In the first configuration, a thick scintillation crystal (TSC) consisting of a thick, monolithic slab of CsI(Tl) was coupled to a mirror-lens-camera system. The second configuration is based on a fiber-optic scintillation glass array (FOSGA), wherein the scintillation glass is drawn into long fiber-optic conduits, inserted into a grid-type housing constructed out of polymer-tungsten alloy, and coupled to an array of photodiodes for digital read-out. The imaging prototypes were characterized using theoretical studies and imaging measurements to obtain fundamental metrics of imaging performance. Spatial resolution was measured based on a modulation transfer function (MTF), noise was evaluated in terms of a noise power spectrum (NPS), and overall contrast was characterized in the form of detective quantum efficiency (DQE). The imaging studies were used to optimize the TSC and FOSGA imagers and propose prototype configurations for order-of-magnitude improvements in overall image quality. In addition, a fast and simple technique was developed to measure the MTF, NPS, and

  4. One-pot facile electrospinning construct of flexible Janus nanofibers with tunable and enhanced magnetism–photoluminescence bifunctionality

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Liyan [Jilin Jianzhu University, Key Laboratory of Building Energy-Saving Technology Engineering, College of Materials Science and Engineering (China); Dong, Xiangting, E-mail: dongxiangting888@163.com [Changchun University of Science and Technology, Key Laboratory of Applied Chemistry and Nanotechnology at Universities of Jilin Province (China); Gai, Guangqing, E-mail: gaigq@163.com; Zhao, Li [Jilin Jianzhu University, Key Laboratory of Building Energy-Saving Technology Engineering, College of Materials Science and Engineering (China); Xu, Shuzhi [Jilin Business and Technology College, School of Biotechnology Engineering (China); Xiao, Xinfu [Jilin Jianzhu University, Key Laboratory of Building Energy-Saving Technology Engineering, College of Materials Science and Engineering (China)

    2015-02-15

    A novel nanostructure of flexible Janus nanofibers with tunable and enhanced magnetism–photoluminescence difunctionality has been successfully fabricated by one-pot electrospinning using specially designed parallel spinneret. Europium complex Eu(BA){sub 3}phen (BA = benzoic acid, phen = 1,10-phenanthroline), terbium complex Tb(BA){sub 3}phen, and Fe{sub 3}O{sub 4} nanoparticles (NPs) were, respectively, incorporated into polyvinyl pyrrolidone (PVP) and electrospun into Janus nanofibers. The morphology, structure, and property of the Janus nanofibers were investigated in detail by scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, fluorescence spectroscopy, and vibrating sample magnetometry. The average diameter of the Janus nanofibers is about ca. 300 nm. Every Janus nanofiber is composed of one nanofiber with different performances on two sides, one side is composed of Fe{sub 3}O{sub 4} NPs and PVP, and the other side consists of [Eu(BA){sub 3}phen + Tb(BA){sub 3}phen] and PVP. This novel nanostructures can effectively isolate Eu(BA){sub 3}phen and Tb(BA){sub 3}phen from Fe{sub 3}O{sub 4} NPs so that the exciting light and emitting light in the [Eu(BA){sub 3}phen + Tb(BA){sub 3}phen]/PVP domain will almost not be affected by Fe{sub 3}O{sub 4} NPs. The Janus nanofibers possess higher fluorescent intensity owing to their special nanostructure compared with non-Janus composite nanofiber with the same compositions. Moreover, the Janus nanofibers have multicolored and color-tunable photoluminescence, the emitting color could be tuned in a wide color range of red–yellow–green by adjusting the molar ratio of Eu(BA){sub 3}phen to Tb(BA){sub 3}phen under the excitation of 274-nm single-wavelength ultraviolet light, and the magnetism also could be tuned by changing the amounts of Fe{sub 3}O{sub 4} NPs. The new type Janus nanofibers with tunable and enhanced magnetism–photoluminescence bifunctionality have

  5. A novel photoluminescent nanohybrid of poly(ε-caprolactone) grafted Mg/Al layered double hydroxides and Tb{sup 3+} ions: Synthesis and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Bach, Long Giang [Department of Imaging System Engineering, Pukyong National University, Busan 608-737 (Korea, Republic of); Center for Advanced Materials Research, Nguyen Tat Thanh Unviersity, Ho Chi Minh City (Viet Nam); Islam, Md. Rafiqul [Department of Imaging System Engineering, Pukyong National University, Busan 608-737 (Korea, Republic of); Energy and Mineral Resources Division, Ministry of Power, Energy and Mineral Resources, Government of the People’s Republic of Bangladesh, Dhaka 1000 (Bangladesh); Cao, Xuan Thang [Department of Imaging System Engineering, Pukyong National University, Busan 608-737 (Korea, Republic of); Park, Jong Myung [Surface Engineering Laboratory, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology (POSTECH), Pohang 790-784 (Korea, Republic of); Lim, Kwon Taek, E-mail: ktlim@pknu.ac.kr [Department of Imaging System Engineering, Pukyong National University, Busan 608-737 (Korea, Republic of)

    2014-01-05

    Highlights: • The photoluminescent LDHs-PCL-Tb{sup 3+} nanohybrid was successfully synthesized. • Structure and morphology of LDHs-g-PCL-Tb{sup 3+} were investigated by FT-IR, SEM, and TGA. • XPS and EDS analyses further suggested the formation of LDHs-g-PCL-Tb{sup 3+}. • Optical property of LDHs-g-PCL-Tb{sup 3+} was investigated by PL. -- Abstract: This paper demonstrates a systematic study of the synthesis and characterization of the hybrid of Mg–Al layer double hydroxides (LDHs), poly(ε-caprolactone) (PCL), and terbium ions (Tb{sup 3+}). The hybrid LDH-g-PCL-Tb{sup 3+}-1,10-phenanthroline (Phen) was prepared by the combination of ring opening polymerization (ROP), click chemistry, and coordination chemistry. First, LDHs with a molar ratio of Mg/Al = 2 were prepared by the co-precipitation method, which was subsequently functionalized with (3-chloropropyl) trimethoxysilane in order to introduce azide groups through the reaction of chlorine with sodium azide. Meanwhile, the acetylene functionalized PCL was prepared by ROP of ε-CL, followed by esterification of the hydroxyl groups using succinic anhydride. The click reaction of alkyne-PCL and N{sub 3}-LDHs successfully afforded LDH-g-PCL, which was coordinated with Tb{sup 3+} ions in the presence of Phen. The structure and properties of the nanohybrids were investigated by FT-IR, XPS, EDS, SEM, and TGA analyses. The data indicate the coordination of Tb{sup 3+} ions with LDH-g-PCL nanohybrids. The content of Tb{sup 3+} ions in the LDH-g-PCL-Tb{sup 3+}-Phen complex was calculated to be 8.7% (w/w). The LDH-g-PCL-Tb{sup 3+}-Phen complexes showed four emission bands with high fluorescence intensity centered at 489 nm ({sup 5}D{sub 4} → {sup 7}F{sub 6}), 546 nm ({sup 5}D{sub 4} → {sup 7}F{sub 5}), 586 nm ({sup 5}D{sub 4} → {sup 7}F{sub 4}) and 623 nm ({sup 5}D{sub 4} → {sup 7}F{sub 3}) with excitation at 328 nm ({sup 3}F{sub 6} → {sup 5}G{sub 6}). The stability of LDH-g-PCL-Tb{sup 3+}-Phen complexes

  6. The role of alpha therapy for local and systemic treatment of cancer

    Energy Technology Data Exchange (ETDEWEB)

    Allen, B.J. [St George Hospital, Kogarah, NSW (Australia)

    1998-03-01

    Major problems in the management of cancer relate to the inability to control some primary lesions, e.g. glioblastoma multiforme (GBM), and the inability to deal with metastatic cancer arising from malignant cancers such as melanoma, breast and other cancers. Binary alpha therapy using neutron capture in boron-10 offers the potential for improved prognosis for high grade brain tumours such as GBM and melanoma metastases to the brain. Metastatic cancer proceeds through a number of quite separate stages in the development of lethal disease, i e. cells in transit, preangiogenic lesions, subclinical and clinical lesions. Early stages offer the potential for control if targeted alpha therapy is applied. However, the dose must be localised to the cancer cell and this requirement rules out beta-emitting radionuclides, which are more suited for clinical lesions. Alpha-emitting radionuclides are the most appropriate toxins, as their efficacy depends on the linear energy transfer (LET) and range of the alpha particles. After matching the cancer stage, radiolabel and carrier, we find that {sup 149}Tb is the radionuclide of choice for systemic therapy in all aspects except production. The production of {sup 149}Tb in {mu}Ci (kBq) quantities has been achieved using the heavy ion reaction at the ANU tandem accelerator at Canberra and in multi-mCi (MBq) quantities using the spallation reaction in combination with on-line isotope separation technology of ISOLDE at CERN. Terbium is ideally suited for chelation to monoclonal antibodies to produce stable radio-immunoconjugates (RIC). Astatine-211 is a halide and has potential for the elimination of early stage melanoma metastases as At-MTB. However, the availability of the alpha generators {sup 228}Th-{sup 212}Bi and {sup 225}Ac-{sup 213}Bi facilitates the use of Bi-RIC in clinical trials for acute myeloid leukaemia and cystic glioma. Alpha therapy has the potential to control refractory cancers when treated at the minimum residual

  7. Tailoring Magnetic Properties in Bulk Nanostructured Solids

    Science.gov (United States)

    Morales, Jason Rolando

    applied magnetic field to the sample. Third, a dense magneto-optical material (rare earth oxide) was produced that rotates transmitted polarized light under an externally applied magnetic field, called the Faraday Effect. The magnitude of the rare earth oxide Faraday Effect surpasses that of the current market leader (terbium gallium garnet) in Faraday isolators by ˜2.24x.

  8. Metal-tag labeling coupled with multiple reaction monitoring-mass spectrometry for absolute quantitation of proteins.

    Science.gov (United States)

    Wang, Xueying; Wang, Xin; Qin, Weijie; Lin, Hongjun; Wang, Jifeng; Wei, Junying; Zhang, Yangjun; Qian, Xiaohong

    2013-09-21

    Mass spectrometry-based quantitative proteomics, consisting of relative and absolute parts, has been used to discover and validate proteins with key functions related to physiological and pathological processes. Currently, stable isotope dilution-multiple reaction monitoring-mass spectrometry (SID-MRM-MS) is the most commonly used method for the absolute determination of proteins in a biological sample. A prerequisite for this method is obtaining internal standards with isotope labels. Although many approaches have been developed for the labeling and preparation of internal peptides, expensive stable isotope labeling coupled with SID-MRM-MS has limited the application and development of an absolute quantitative method. Recently, a low-cost strategy using metal-tag labeling and MS has been developed for relative quantification of peptides or proteins. The introduction of labeling using metal tags has the merits of allowing multiple labeling and enlarging the mass shift to overcome the overlap of adjacent isotope clusters. However, most papers described MRM-MS for protein absolute quantification based on the metal in its peptides labelled with metal by inductively coupled plasma mass spectrometry (ICP MS) but not on its peptides labelled with metal. In this work, a novel approach based on metal-tag labeling coupled with MRM-MS was established for the absolute quantification of peptides or proteins. The principle of the method is that a bifunctional chelator, 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid bearing an N-hydroxysuccinimide ester (DOTA-NHS ester), is used to modify the N-termini of signature peptides from a target protein, and the modified peptides then chelate a certain metal, such as thulium, to form metal-tagged peptides (Tm-DOTA-P). Internal peptides are chemically synthesized and labeled with another metal, such as terbium (Tb-DOTA-P), as the internal standard. Both the Tb-DOTA- and Tm-DOTA-labeled peptides in samples can be analysed via

  9. A high-speed scintillation-based electronic portal imaging device to quantitatively characterize IMRT delivery.

    Science.gov (United States)

    Ranade, Manisha K; Lynch, Bart D; Li, Jonathan G; Dempsey, James F

    2006-01-01

    We have developed an electronic portal imaging device (EPID) employing a fast scintillator and a high-speed camera. The device is designed to accurately and independently characterize the fluence delivered by a linear accelerator during intensity modulated radiation therapy (IMRT) with either step-and-shoot or dynamic multileaf collimator (MLC) delivery. Our aim is to accurately obtain the beam shape and fluence of all segments delivered during IMRT, in order to study the nature of discrepancies between the plan and the delivered doses. A commercial high-speed camera was combined with a terbium-doped gadolinium-oxy-sulfide (Gd2O2S:Tb) scintillator to form an EPID for the unaliased capture of two-dimensional fluence distributions of each beam in an IMRT delivery. The high speed EPID was synchronized to the accelerator pulse-forming network and gated to capture every possible pulse emitted from the accelerator, with an approximate frame rate of 360 frames-per-second (fps). A 62-segment beam from a head-and-neck IMRT treatment plan requiring 68 s to deliver was recorded with our high speed EPID producing approximately 6 Gbytes of imaging data. The EPID data were compared with the MLC instruction files and the MLC controller log files. The frames were binned to provide a frame rate of 72 fps with a signal-to-noise ratio that was sufficient to resolve leaf positions and segment fluence. The fractional fluence from the log files and EPID data agreed well. An ambiguity in the motion of the MLC during beam on was resolved. The log files reported leaf motions at the end of 33 of the 42 segments, while the EPID observed leaf motions in only 7 of the 42 segments. The static IMRT segment shapes observed by the high speed EPID were in good agreement with the shapes reported in the log files. The leaf motions observed during beam-on for step-and-shoot delivery were not temporally resolved by the log files.

  10. Structural and emission properties of Tb3+-doped nitrogen-rich silicon oxynitride films

    Science.gov (United States)

    Labbé, C.; An, Y.-T.; Zatryb, G.; Portier, X.; Podhorodecki, A.; Marie, P.; Frilay, C.; Cardin, J.; Gourbilleau, F.

    2017-03-01

    Terbium doped silicon oxynitride host matrix is suitable for various applications such as light emitters compatible with CMOS technology or frequency converter systems for photovoltaic cells. In this study, amorphous Tb3+ ion doped nitrogen-rich silicon oxynitride (NRSON) thin films were fabricated using a reactive magnetron co-sputtering method, with various N2 flows and annealing conditions, in order to study their structural and emission properties. Rutherford backscattering (RBS) measurements and refractive index values confirmed the silicon oxynitride nature of the films. An electron microscopy analysis conducted for different annealing temperatures (T A) was also performed up to 1200 °C. Transmission electron microscopy (TEM) images revealed two different sublayers. The top layer showed porosities coming from a degassing of oxygen during deposition and annealing, while in the region close to the substrate, a multilayer-like structure of SiO2 and Si3N4 phases appeared, involving a spinodal decomposition. Upon a 1200 °C annealing treatment, a significant density of Tb clusters was detected, indicating a higher thermal threshold of rare earth (RE) clusterization in comparison to the silicon oxide matrix. With an opposite variation of the N2 flow during the deposition, the nitrogen excess parameter (Nex) estimated by RBS measurements was introduced to investigate the Fourier transform infrared (FTIR) spectrum behavior and emission properties. Different vibration modes of the Si-N and Si-O bonds have been carefully identified from the FTIR spectra characterizing such host matrices, especially the ‘out-of-phase’ stretching vibration mode of the Si-O bond. The highest Tb3+ photoluminescence (PL) intensity was obtained by optimizing the N incorporation and the annealing conditions. In addition, according to these conditions, the integrated PL intensity variation confirmed that the silicon nitride-based host matrix had a higher thermal threshold of rare earth

  11. New reddish-orange and greenish-yellow light emitting phosphors: Eu{sup 3+} and Tb{sup 3+}/Eu{sup 3+} in sodium germanate glass

    Energy Technology Data Exchange (ETDEWEB)

    Álvarez, E. [Departamento de Física, Universidad de Sonora (UNISON), Boulevard Luis Encinas y Rosales s/n, Hermosillo 83000, Sonora (Mexico); Zayas, Ma. E. [Departamento de Investigación en Física, Universidad de Sonora (UNISON), Boulevard Luis Encinas y Rosales s/n, Hermosillo 83000, Sonora (Mexico); Alvarado-Rivera, J. [Departamento de Física, Universidad de Sonora (UNISON), Boulevard Luis Encinas y Rosales s/n, Hermosillo 83000, Sonora (Mexico); Félix-Domínguez, F. [Departamento de Física, Universidad de Sonora (UNISON), Boulevard Luis Encinas y Rosales s/n, Hermosillo 83000, Sonora (Mexico); Centro de investigación en Materiales Avanzados, S.C. Miguel de Cervantes 120, Complejo industrial Chihuahua, Chihuahua 31109, Chihuahua (Mexico); Duarte-Zamorano, R.P. [Departamento de Física, Universidad de Sonora (UNISON), Boulevard Luis Encinas y Rosales s/n, Hermosillo 83000, Sonora (Mexico); Caldiño, U., E-mail: cald@xanum.uam.mx [Departamento de Física, Universidad Autónoma Metropolitana-Iztapalapa, PO Box 55-534, México City 09340, Distrito Federal (Mexico)

    2014-09-15

    A spectroscopic analysis of sodium germanate glasses activated with Eu{sup 3+}, Tb{sup 3+} and Eu{sup 3+}/Tb{sup 3+} is performed from their photoluminescence spectra and decay times. In the Eu{sup 3+}-singly doped glass reddish-orange light emission, with x=0.64 and y=0.35 CIE1931 chromaticity coordinates, is obtained upon Eu{sup 3+} excitation at 393 nm. Such chromaticity coordinates are close to those (0.67, 0.33) proposed by the National Television Standard Committee for the red phosphor. When the sodium germanate glass is co-doped with Tb{sup 3+} and Eu{sup 3+} greenish-yellow light emission, with (0.41, 0.46) CIE1931 chromaticity coordinates, is obtained upon Tb{sup 3+} excitation at 344 nm. Such greenish-yellow luminescence is due mainly to the terbium {sup 5}D{sub 4}→{sup 7}F{sub 6,5} and europium {sup 5}D{sub 0}→{sup 7}F{sub 1,2} emissions, Eu{sup 3+} being sensitized by Tb{sup 3+} through a non-radiative energy transfer. The non-radiative nature of this energy transfer is inferred from the increase in the decay rate of the Tb{sup 3+} emission when the glass is co-doped with Eu{sup 3+}. From an analysis of the Tb{sup 3+} emission decay time curves it is inferred that such energy transfer might take place between Tb{sup 3+} and Eu{sup 3+} clusters through a short-range interaction mechanism. - Highlights: • Sodium germanate glasses are optically activated with Eu{sup 3+} (GNE) and Tb{sup 3+}/Eu{sup 3+} (GNTE). • Reddish-orange light (0.64, 0.35) is generated by GNE pumped with 393 nm light. • Greenish-yellow light (0.41, 0.46) is generated by GNTE pumped with 344 nm light. • Non-radiative energy transfer Tb{sup 3+}→Eu{sup 3+} takes place in GNTE.

  12. International strategic minerals inventory summary report; rare-earth oxides

    Science.gov (United States)

    Jackson, W.D.; Christiansen, Grey

    1993-01-01

    density and heat resistance of sintered ceramics. Yttrium and gadolinium contribute to the efficiency of electronic switches and sensors. Cerium improves the effectiveness of catalysts in the petroleum and automotive industries. Cerium oxides speed glass melting and are used to polish glass by chemical, rather than mechanical, means. Cerium, europium, terbium, and yttrium, as phosphoric compounds, promote the vivid colors of television screens. Consumption of rare earths is expected to grow by about 2.6 percent per year.

  13. Optical spectroscopy and optical waveguide fabrication in Eu{sup 3+} and Eu{sup 3+}/Tb{sup 3+} doped zinc–sodium–aluminosilicate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Caldiño, U., E-mail: cald@xanum.uam.mx [Departamento de Física, Universidad Autónoma Metropolitana-Iztapalapa, P.O. Box 55-534, 09340 México D.F. (Mexico); Speghini, A. [Dipartimento di Biotecnologie, Università di Verona and INSTM, UdR Verona, Strada Le Grazie 15, I-37314 Verona (Italy); Istituto di Fisica Applicata Nello Carrara, C.N.R., Via Madonna del Piano 10, 50019 Sesto Fiorentino (Firenze) (Italy); Berneschi, S. [Istituto di Fisica Applicata Nello Carrara, C.N.R., Via Madonna del Piano 10, 50019 Sesto Fiorentino (Firenze) (Italy); Bettinelli, M. [Dipartimento di Biotecnologie, Università di Verona and INSTM, UdR Verona, Strada Le Grazie 15, I-37314 Verona (Italy); Brenci, M. [Istituto di Fisica Applicata Nello Carrara, C.N.R., Via Madonna del Piano 10, 50019 Sesto Fiorentino (Firenze) (Italy); Pasquini, E. [Istituto di Fisica Applicata Nello Carrara, C.N.R., Via Madonna del Piano 10, 50019 Sesto Fiorentino (Firenze) (Italy); Dipartimento di Fisica e Astronomia, Università di Firenze, Via Sansone 1, 50019 Sesto Fiorentino (Firenze) (Italy); Pelli, S. [Istituto di Fisica Applicata Nello Carrara, C.N.R., Via Madonna del Piano 10, 50019 Sesto Fiorentino (Firenze) (Italy); Righini, G.C. [Istituto di Fisica Applicata Nello Carrara, C.N.R., Via Madonna del Piano 10, 50019 Sesto Fiorentino (Firenze) (Italy); Museo Storico della Fisica e Centro Studi e Ricerche “Enrico Fermi”, Piazza del Viminale 2, 00184 Roma (Italy)

    2014-03-15

    Optical and spectroscopic properties of 2.0% Eu(PO{sub 3}){sub 3} singly doped and 5.0% Tb(PO{sub 3}){sub 3}–2.0% Eu(PO{sub 3}){sub 3} codoped zinc–sodium–aluminosilicate glasses were investigated. Reddish-orange light emission, with x=0.64 and y=0.36 CIE1931 chromaticity coordinates, is obtained in the europium singly doped glass excited at 393 nm. Such chromaticity coordinates are close to those (0.67,0.33) standard of the National Television System Committee for the red phosphor. When the sodium–zinc–aluminosilicate glass is co-doped with Tb{sup 3+} and Eu{sup 3+}, reddish-orange light emission, with (0.61,0.37) CIE1931 chromaticity coordinates, is obtained upon Tb{sup 3+} excitation at 344 nm. This reddish-orange luminescence is generated mainly by {sup 5}D{sub 0}→{sup 7}F{sub 1} and {sup 5}D{sub 0} →{sup 7}F{sub 2} emissions of Eu{sup 3+}, europium being sensitized by terbium through a non-radiative energy transfer. From an analysis of the Tb{sup 3+} emission decay curves it is inferred that the Tb{sup 3+}→Eu{sup 3+} energy transfer might take place between Tb{sup 3+} and Eu{sup 3+} clusters through a short-range interaction mechanism, so that an electric dipole–quadrupole interaction appears to be the most probable transfer mechanism. The efficiency of this energy transfer is about 62% upon excitation at 344 nm. In the singly doped and codoped glasses multimode optical waveguides were successfully produced by Ag{sup +}–Na{sup +} ion exchange, and they could be characterized at various wavelengths. -- Highlights: • Reddish-orange light emission can be generated from Tb{sup 3+} and Eu{sup 3+} codoped zinc–sodium–aluminosilicate glasses excited at 344 nm. • The Eu{sup 3+} is sensitized by Tb{sup 3+} through a non-radiative energy transfer. • Highly multimode waveguides can be fabricated by diluted silver–sodium exchange. • This type of AlGaN LEDs pumped glass phosphors might be useful for generation of reddish-orange light.

  14. Fluorometric flow-immunoassay for alkylphenol polyethoxylates on a microchip containing a fluorescence detector comprised of an organic light emitting diode and an organic photodiode.

    Science.gov (United States)

    Liu, Rong; Ishimatsu, Ryoichi; Yahiro, Masayuki; Adachi, Chihaya; Nakano, Koji; Imato, Toshihiko

    2015-03-01

    A compact fluorescence detector was constructed on a microchip from an organic light emitting diode (OLED) as the light source and an organic photodiode (OPD) as the photo-detector and was used in an immunoassay for alkylphenol polyethoxylates (APE). The OLED based on a terbium complex emitted a sharp light at the main wavelength of 546 nm with a full width at half maximum of 9 nm. The incident photo-to-current conversion efficiency (IPCE) of the OPD fabricated with Fullerene 70 (C70) and tris[4-(5-phenylthiopen-2-yl)phenyl]-amine (TPTPA) was approximately 44% for light at a wavelength of 586 nm. The performance of the fluorescence detector was evaluated for the determination of resorufin (λ(em)=586 nm) and the photocurrent of the OPD due to the fluorescence of resorufin was proportional to the concentration of resorufin in the range from 0 to 18 µM with a detection limit (S/N=3) of 0.6 µM. The fluorescence detector was successfully utilized in a competitive enzyme-linked immunosorbent assay for APE, where an anti-APE antibody was immobilized on the surface of the channel of the Polydimethylsiloxane (PDMS) microchip or on the surface of magnetic microbeads. After an immunoreaction with a sample solution of APE containing a horse radish peroxidase (HRP)-labeled APE, the fluorescence of resorufin generated just after introduction of a mixed solution of Amplex Red and H2O2 was measured using the fluorescence detector. The calibration curve for the photocurrent signals of the OPD due to the fluorescence of resorufin against the logarithmic concentration of APE was sigmoidal in shape. The detection limits defined as IC80 were ca. 1 ppb and ca. 2 ppb, respectively, for the methods using the anti-APE antibody immobilized on the surface of the microchannel and in the case where the antibody was immobilized on the surface of magnetic microbeads. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Synthesis and optical properties of Tb{sup 3+} doped CdF{sub 2} single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Boubekri, H. [Laser Department, Nuclear Technique Division, Nuclear Research Center of Algiers, 02 Bd Frantz Fanon, 16000 Algiers (Algeria); Laboratory of Laser Physics, Optical Spectroscopy and Optoelectronics (LAPLASO), Badji Mokhtar Annaba University, PO Box 12, 23000 Annaba (Algeria); Diaf, M., E-mail: diafma@yahoo.fr [Laboratory of Laser Physics, Optical Spectroscopy and Optoelectronics (LAPLASO), Badji Mokhtar Annaba University, PO Box 12, 23000 Annaba (Algeria); Labbaci, K. [Laboratory of Laser Physics, Optical Spectroscopy and Optoelectronics (LAPLASO), Badji Mokhtar Annaba University, PO Box 12, 23000 Annaba (Algeria); Guerbous, L. [Laser Department, Nuclear Technique Division, Nuclear Research Center of Algiers, 02 Bd Frantz Fanon, 16000 Algiers (Algeria); Duvaut, T.; Jouart, J.P. [ECATHERM/GRESPI, Reims Champagne-Ardenne University (France)

    2013-10-25

    Highlights: •Terbium doped CdF{sub 2} single crystals grown by Bridgman technique. •Absorption, excitation and emission spectra recorded at room temperature. •Spectroscopic properties investigated by use of the Judd–Ofelt theory. •Transition probability, radiative lifetimes, quantum efficiency and branching ratios are calculated. •Emission cross-section is measured by use of Füchtbauer–Ladenburg theory. -- Abstract: This paper reports the optical analysis of Tb{sup 3+} doped CdF{sub 2} single crystals. The pulled crystals were prepared by use of the Bridgman technique from a vacuum furnace in fluoride atmosphere. Absorption, photoluminescence excitation and emission spectra were recorded at room temperature. The Judd–Ofelt (JO) intensity parameters Ω{sub 2}, Ω{sub 4} and Ω{sub 6} for 4f–4f transitions of Tb{sup 3+} ions were computed from the optical absorption spectra using UV, visible and near infrared transitions. These parameters were then used to calculate the radiative transition probabilities (A{sub JJ′}), branching ratios (β{sub JJ′}) and radiative lifetimes of the two main laser emitting levels {sup 5}D{sub 3} and {sup 5}D{sub 4} of Tb{sup 3+} ions. The obtained spectroscopic properties are compared to those of Tb{sup 3+} transitions in other hosts. The excitation spectrum in the UV–Visible spectral range is very close to the absorption spectrum indicating that all observed absorption levels can excite the green emission of Tb{sup 3+} corresponding to {sup 5}D{sub 4} → {sup 7}F{sub 5} transition. The emission spectra exhibit a weak blue emission and a strong green emission in the spectral range 370–460 nm and 478–612 nm which are assigned to {sup 5}D{sub 3} → {sup 7}F{sub J} (J = 6, 5, 4, 3, 2) and {sup 5}D{sub 4} → {sup 7}F{sub J} (J = 6, 5, 4, 3) transitions of Tb{sup 3+}, respectively. The green emission {sup 5}D{sub 4} → {sup 7}F{sub 5} at 532 nm having an emission cross-section equal to 8 × 10{sup −22} cm

  16. New greenish-yellow and yellowish-green emitting glass phosphors: Tb{sup 3+}/Eu{sup 3+} and Ce{sup 3+}/Tb{sup 3+}/Eu{sup 3+} in zinc phosphate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Caldino, U., E-mail: cald@xanum.uam.mx [Departamento de Fisica, Universidad Autonoma Metropolitana-Iztapalapa, P.O. Box 55-534, 09340 Mexico D.F. (Mexico); Alvarez, E. [Departamento de Fisica, Universidad de Sonora (UNISON), Boulevard Luis Encinas y Rosales s/n, Hermosillo, Sonora 83000, Mexico (Mexico); Speghini, A. [Dipartimento di Biotecnologie, Universita di Verona, and INSTM, UdR Verona, Strada Le Grazie 15, I-37314 Verona (Italy); IFAC CNR, Nello Carrara Institute of Applied Physics, MDF Lab, I-50019 Sesto Fiorentino, FI (Italy); Bettinelli, M. [Dipartimento di Biotecnologie, Universita di Verona, and INSTM, UdR Verona, Strada Le Grazie 15, I-37314 Verona (Italy)

    2013-03-15

    A spectroscopic investigation of zinc phosphate glasses activated with Eu{sup 3+}, Tb{sup 3+}/Eu{sup 3+} and Ce{sup 3+}/Tb{sup 3+}/Eu{sup 3+} ions is performed through photoluminescence spectra and decay time measurements. Greenish-yellow light emission, with x=0.42 and y=0.50 CIE1931 chromaticity coordinates, is obtained in the 5.0% Tb(PO{sub 3}){sub 3}-2.0% Eu(PO{sub 3}){sub 3} codoped zinc phosphate glass upon Tb{sup 3+} excitation at 340 nm. Such greenish-yellow luminescence is generated mainly by the {sup 5}D{sub 4}{yields}{sup 7}F{sub 6,5} and {sup 5}D{sub 0}{yields}{sup 7}F{sub 1,2} emissions of Tb{sup 3+} and Eu{sup 3+}, respectively, europium being sensitized by terbium through a non-radiative energy transfer. By codoping with 0.1 Ce(PO{sub 3}){sub 3} in addition to Tb{sup 3+}/Eu{sup 3+} yellowish-green light emission with CIE1931 chromaticity coordinates, x=0.33 and y=0.48, is achieved through non-radiative energy transfer from Ce{sup 3+} to Tb{sup 3+} and from Ce{sup 3+} via Tb{sup 3+} to Eu{sup 3+} upon 280 nm excitation (peak emission wavelength of AlGaN-based LEDs). - Highlights: Black-Right-Pointing-Pointer Zn(PO{sub 3}){sub 2} glasses are optically activated with Tb{sup 3+}/Eu{sup 3+} (ZPO5Tb2Eu) and Ce{sup 3+}/Eu{sup 3+}/Tb{sup 3+} (ZPOCe5Tb2Eu). Black-Right-Pointing-Pointer Non-radiative energy transfer Tb{sup 3+}{yields}Eu{sup 3+} takes place in ZPO5Tb2Eu. Black-Right-Pointing-Pointer Greenish-yellow light is generated by ZPO5Tb2Eu pumped with 340 nm-UV light. Black-Right-Pointing-Pointer Non-radiative energy transfer Ce{sup 3+}{yields}Tb{sup 3+} and Ce{sup 3+}{yields}Eu{sup 3+} via Tb{sup 3+} takes place in ZPOCe5Tb2Eu. Black-Right-Pointing-Pointer Yellowish-green light is generated by ZPOCe5Tb2Eu pumped with 280 nm-UV light (AlGaN-LEDs).

  17. A rare opportunity beckons

    Energy Technology Data Exchange (ETDEWEB)

    Gschneidner, K

    2011-02-01

    There is a great deal of uncertainty for the future of rare-earth production. Rare-earths are a collection of 17 chemical elements in the periodic table, which include scandium and yttrium as well as the 15 lanthanides, such as dysprosium and ytterbium. China has a stranglehold on today's rare-earth market, which was worth about $3bn in 2010, with the country accounting for about 95% of worldwide production. Yet China's future actions can only be guessed at best. In September it halted shipments of rare-earth elements to Japan over a diplomatic spat concerning the detention of a Chinese trawler captain. Although the ban was later lifted, the episode raised concerns around the world about China's rare-earth monopoly and its use in diplomacy. China has already warned that it will not export any rare-earth material in the coming years as it expects its own consumption of rare-earth metals to increase. The country has introduced export taxes as well as production and export quotas, and also refused to grant any new rare-earth mining licences. Furthermore, because its reserves are limited and China's internal markets are growing so rapidly, the country has suggested it will no longer export products that require rare-earth elements, especially those that need heavy rare-earth elements, such as terbium and dysprosium. China's actions have led to huge rises in the cost of rare-earth materials and products. Dysprosium oxide, for example, has shot up from $36 per kilogram in 2005 to a massive $305 per kilogram by late last year. This could have a huge impact on much of today's electronics industry, given that rare-earth elements are ubiquitous in electric motors, computers, batteries, liquid-crystal displays (LCDs) and mobile phones. Neodymium-iron-boron permanent magnets, for example, are used as computer spindle drives. The question is: what can be done to ensure that China's dominance of the rare-earth industry does not affect the

  18. Optimization of phosphor-based detector design for oblique x-ray incidence in digital breast tomosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Acciavatti, Raymond J.; Maidment, Andrew D. A. [Department of Radiology, Perelman School of Medicine, University of Pennsylvania, Philadelphia, Pennsylvania 19104 (United States)

    2011-11-15

    Purpose: In digital breast tomosynthesis (DBT), a volumetric reconstruction of the breast is generated from a limited range of x-ray projections. One trade-off of DBT is resolution loss in the projections due to non-normal (i.e., oblique) x-ray incidence. Although degradation in image quality due to oblique incidence has been studied using empirical data and Monte Carlo simulations, a theoretical treatment has been lacking. The purpose of this work is to extend Swank's calculations of the transfer functions of turbid granular phosphors to oblique incidence. The model is ultimately used as a tool for optimizing the design of DBT detectors. Methods: A quantum-limited system and 20 keV x-rays are considered. Under these assumptions, the modulation transfer function (MTF) and noise power spectra (NPS) are derived using the diffusion approximation to the Boltzmann equation to model optical scatter within the phosphor. This approach is applicable to a nonstructured scintillator such as gadolinium oxysulfide doped with terbium (Gd{sub 2}O{sub 2}S:Tb), which is commonly used in breast imaging and which can reasonably approximate other detector materials. The detective quantum efficiency (DQE) is then determined from the Nishikawa formulation, where it is written as the product of the x-ray quantum detection efficiency, the Swank factor, and the Lubberts fraction. Transfer functions are calculated for both front- and back-screen configurations, which differ by positioning the photocathode at the exit or entrance point of the x-ray beam, respectively. Results: In the front-screen configuration, MTF and DQE are found to have considerable angular dependence, while NPS is shown to vary minimally with projection angle. As expected, the high frequency MTF and DQE are degraded substantially at large angles. By contrast, all transfer functions for the back-screen configuration have the advantage of significantly less angular dependence. Using these models, we investigated the

  19. Gadolinium(III) complexes of 1,4,7-triazacyclononane based picolinate ligands: simultaneous optimization of water exchange kinetics and electronic relaxation.

    Science.gov (United States)

    Nonat, Aline; Giraud, Marion; Gateau, Christelle; Fries, Pascal H; Helm, Lothar; Mazzanti, Marinella

    2009-10-14

    The two new tripodal picolinate H(3)ebpatcn (1-carboxyethyl-4,7-bis((6-carboxypyridin-2-yl)methyl)-1,4,7-triazacyclononane) and H(4)pbpatcn (1-methylphosphonic-acid-4,7-bis((6-carboxypyridin-2-yl)methyl)-1,4,7-triazacyclononane) ligands based on the 1,4,7-triazacyclononane anchor were prepared and their lanthanide complexes were characterized by NMR, fluorescence and potentiometric studies. The [Gd(ebpatcn)(H(2)O)] complex displays a relaxivity of r(1) = 4.68 mM(-1) s(-1) at 45 MHz and 298 K, whereas r(1) = 4.55 mM(-1) s(-1) was measured for [Gd(Hpbpatcn)(H(2)O)] under the same conditions. The modified scaffold of the ligands with respect to the previously reported H(3)bpatcn (1-(carboxymethyl)-4,7-bis[(6-carboxypyridin-2-yl)methyl]-1,4,7-triazacyclononane) leads to an optimization of the properties of these gadolinium complexes. The replacement of an acetate binding group of the H(3)bpatcn ligand with a propionate group (H(3)ebpatcn) or a phosphonate group (H(4)pbpatcn) leads to a faster exchange rate of the coordinated water molecule in both mono-aquo gadolinium complexes. The resulting water exchange rate is optimized for the future design of high relaxivity macromolecular gadolinium based contrast agents with a value measured by O(17) NMRD of k(ex) = 34 x 10(6) s(-1) for [Gd(Hpbpatcn)(H(2)O)] falling in the range of optimum values of (30 to 50) x 10(6) s(-1) predicted by the SBM theory. The water exchange rate k(ex)(298) = 86 x 10(6) s(-1) of the complex [Gd(ebpatcn)(H(2)O)] is the fastest reported in the literature for a neutral complex with only one inner-sphere water molecule. The relatively high stability of these modified gadolinium complexes (pGd = 14.1 for Gd(pbpatcn) and 13.1 for Gd(ebpatcn)) is similar to that of the [Gd(bpatcn)(H(2)O)] complex (pGd = 13.6). The high luminescence efficiency is also retained for the terbium complex. However, whereas the longitudinal electronic spin relaxation time keeps a value for [Gd(ebpatcn)(H(2)O)], which is long

  20. Commissioning and modification of the low temperature scanning polarization microscope (TTSPM) and imaging of the local magnetic flux density distribution in superconducting niobium samples; Inbetriebnahme und Modifikation eines Tieftemperatur-Raster-Polarisations-Mikroskops (TTRPM) und Abbildung der lokalen Flussdichteverteilung in supraleitenden Niob-Proben

    Energy Technology Data Exchange (ETDEWEB)

    Gruenzweig, Matthias Sebastian Peter

    2014-07-11

    The dissertation is separated into two different parts, which will be presented in the following. Part I of the dissertation is about the commissioning and the modification of the ''low-temperature scanning polarization microscope'' which was designed in a previous dissertation of Stefan Guenon [1]. A scanning polarization microscope has certain advantages compared to conventional polarization microscopes. With a scanning polarization microscope it is easily possible to achieve a high illumination intensity, which is important to realize a high signal-to-noise ratio. Moreover, the confocal design of the scanning polarization microscope improves the resolution of the microscope by a factor of 1.4. Normally, it is not necessary to post-process the images by means of differential frame method to eliminate the contrast of non-magnetic origin. In contrast to conventional polarization microscopes the low-temperature scanning polarization microscope is able to image electronic transport properties via beam-induced voltage variation in addition to the magneto-optical effects. In this dissertation, it was possible to demonstrate the performance capability of the scanning polarization microscope at room temperature as well as at low temperatures. The investigation of the polar Kerr-effect has been carried out with a BaFe{sub 12}O{sub 19}-test sample whereas the measurements of the longitudinal Kerr-effect have been carried out with an in-plane magnetized acceleration sensor. Furthermore, an independent room temperature construction for out-of-plane measurements in a magnetic field up to 1 Tesla has been designed and implemented within the framework of a diploma thesis, supervised by the author of this dissertation. Using this construction, it was possible to gain experimental results regarding the interlayer exchange coupling between iron-terbium alloys (Fe{sub 1-x}Tb{sub x}) and cobalt-platinum multilayers (vertical stroke Co/Pt vertical stroke {sub n

  1. The influence of carboxilate, phosphinate and seleninate groups on luminescent properties of lanthanides complexes

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Jorge H.S.K.; Formiga, André L.B.; Sigoli, Fernando A., E-mail: fsigoli@iqm.unicamp.br

    2014-10-15

    changing the triplet state energy in the range of ∼2000 cm{sup −1}. The changes in the energy transfer rates from triplet state to europium(III) levels are not sufficient to significantly modify the population of the europium(III) {sup 5}D{sub 0,1} levels and therefore the emission quantum yield. - Highlights: • Influences of ligands on luminescence of europium(III) and terbium(III) complexes. • Ligands: benzoic acid, phenylseleninic acid, and phenylphosphinic acid. • Ground state geometries were obtained from semi-empirical methods. • Theoretical values of JO parameters are compared to experimental ones. • Nature of chemical bonds, energy transfer rates and emission quantum yields.

  2. Photoluminescence and thermoluminescence studies of Tb{sup 3+} doped ZnO nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Pal, Partha P., E-mail: phys.ppal@gmail.com [Department of Applied Physics, Indian School of Mines, Dhanbad 826004 (India); Manam, Jairam [Department of Applied Physics, Indian School of Mines, Dhanbad 826004 (India)

    2013-04-20

    Highlights: ► Tb{sup 3+} doped ZnO nanorods were prepared by precipitation method. ► No change in XRD peak pattern observed after Tb{sup 3+} incorporation. ► PL spectra indicate efficient energy transfer from ZnO host to Tb{sup 3+}. ► Tb{sup 3+} related glow peak at 255 °C obey first order kinetics. ► Tb{sup 3+} related glow peak is 1.5 times more intense than that of undoped sample. -- Abstract: Here in, the synthesis of the terbium doped zinc oxide (ZnO:Tb{sup 3+}) nanorods via room temperature chemical co-precipitation was explored and their structural, photoluminescence (PL) and thermoluminescence (TL) studies were investigated in detail. The present samples were found to have pure hexagonal wurtzite crystal structure. The as obtained samples were broadly composed of nanoflakes while the highly crystalline nanorods have been formed due to low temperature annealing of the as synthesized samples. The diameters of the nanoflakes are found to be in the range 50–60 nm whereas the nanorods have diameter 60–90 nm and length 700–900 nm. FTIR study shows Zn-O stretching band at 475 cm{sup −1} showing improved crystal quality with annealing. The bands at 1545 and 1431 cm{sup −1} are attributed to asymmetric and symmetric C=O stretching vibration modes. The diffuse reflectance spectra show band edge emission near 390 nm and a blue shift of the absorption edge with higher concentration of Tb doping. The PL spectra of the Tb{sup 3+}-doped sample exhibited bright bluish green and green emissions at 490 nm ({sup 5}D{sub 4} → {sup 7}F{sub 6}) and 544 nm ({sup 5}D{sub 4} → {sup 7}F{sub 5}) respectively which is much more intense then the blue (450 nm), bluish green (472 nm) and broad green emission (532 nm) for the undoped sample. An efficient energy transfer process from ZnO host to Tb{sup 3+} is observed in PL emission and excitation spectra of Tb{sup 3+}-doped ZnO ions. The doped sample exhibits a strong TL glow peak at 255 °C compared to the

  3. PSI scientific report 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-04-15

    looked at. The substantial enhancement of the therapeutic efficacy of antibodies is reported on, as is the production of terbium radioisotopes for diagnostic and therapeutic applications in nuclear medicine. Non-homogeneous distribution of radionuclides in proton-irradiated liquid-metal targets is the topic covered in a further report and the precise simulation of high-intensity cyclotrons is reported on. The expanding horizons for proton therapy are examined. The report also reviews the Strategy and highlights of general energy research and deals with a Niobia-Ceria based multi-purpose catalyst for diesel exhaust gas after-treatment. High-flux solar-driven thermochemical dissociation of CO{sub 2} and H{sub 2}O using ceria redox reactions and the characterisation of combustion processes by laser spectroscopic measuring techniques are further topics covered. Results of the first projects completed by the Competence Center Energy and Mobility CCEM are discussed, scientific findings on nuclear safety and the safety analysis of the EPR nuclear reactor are discussed, as is the improved retention of radioactive aerosols during a steam-generator tube rupture. Predictive sorption modelling of various substances in Bentonite and opalinus clay and a safety analysis of nuclear power plant systems and their operators are reported on. The characterisation of plutonium in mixed-oxide nuclear fuel by synchrotron radiation is reported on. The impact of the Eyjafjallajoekull volcano eruption on air quality and the detection of recent climatic changes in the Russian Altai are further atmospheric topics dealt with. Finally, the heuristic design for the technical characterisation of passenger vehicles is looked at. The report also lists the facilities available to external users and their use in 2010. Technology transfer is discussed and a statistical overview of the PSI in 2010 is presented. The comprehensive report is finalised with contact information and an extensive overview of

  4. Byproduct metals and rare-earth elements used in the production of light-emitting diodes—Overview of principal sources of supply and material requirements for selected markets

    Science.gov (United States)

    Wilburn, David R.

    2012-01-01

    The use of light-emitting diodes (LEDs) is expanding because of environmental issues and the efficiency and cost savings achieved compared with use of traditional incandescent lighting. The longer life and reduced power consumption of some LEDs have led to annual energy savings, reduced maintenance costs, and lower emissions of carbon dioxide, sulfur dioxide, and nitrogen oxides from powerplants because of the resulting decrease in energy consumption required for lighting applications when LEDs are used to replace less-energy-efficient sources. Metals such as arsenic, gallium, indium, and the rare-earth elements (REEs) cerium, europium, gadolinium, lanthanum, terbium, and yttrium are important mineral materials used in LED semiconductor technology. Most of the world's supply of these materials is produced as byproducts from the production of aluminum, copper, lead, and zinc. Most of the rare earths required for LED production in 2011 came from China, and most LED production facilities were located in Asia. The LED manufacturing process is complex and is undergoing much change with the growth of the industry and the changes in demand patterns of associated commodities. In many respects, the continued growth of the LED industry, particularly in the general lighting sector, is tied to its ability to increase LED efficiency and color uniformity while decreasing the costs of producing, purchasing, and operating LEDs. Research is supported by governments of China, the European Union, Japan, the Republic of Korea, and the United States. Because of the volume of ongoing research in this sector, it is likely that the material requirements of future LEDs may be quite different than LEDs currently (2011) in use as industry attempts to cut costs by reducing material requirements of expensive heavy rare-earth phosphors and increasing the sizes of wafers for economies of scale. Improved LED performance will allow customers to reduce the number of LEDs in automotive, electronic

  5. U.S. Department of Energy Critical Materials Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, D.; Diamond, D.; Li, J.; Sandalow, D.; Telleen, P.; Wanner, B.

    2010-12-01

    This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DOE) based on data collected and research performed during 2010. Its main conclusions include: (a) Several clean energy technologies -- including wind turbines, electric vehicles, photovoltaic cells and fluorescent lighting -- use materials at risk of supply disruptions in the short term. Those risks will generally decrease in the medium and long term. (b) Clean energy technologies currently constitute about 20 percent of global consumption of critical materials. As clean energy technologies are deployed more widely in the decades ahead, their share of global consumption of critical materials will likely grow. (c) Of the materials analyzed, five rare earth metals (dysprosium, neodymium, terbium, europium and yttrium), as well as indium, are assessed as most critical in the short term. For this purpose, 'criticality' is a measure that combines importance to the clean energy economy and risk of supply disruption. (d) Sound policies and strategic investments can reduce the risk of supply disruptions, especially in the medium and long term. (e) Data with respect to many of the issues considered in this report are sparse. In the report, DOE describes plans to (i) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the Department during November and December 2010; (ii) strengthen its capacity for information-gathering on this topic; and (iii) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. DOE will work with other stakeholders -- including interagency colleagues, Congress and the public -- to shape policy tools that strengthen the United States' strategic capabilities. DOE also announces its plan to develop an updated critical

  6. Ultrafast magnetization dynamics of lanthanide metals and alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sultan, Muhammad

    2012-05-14

    In this study, the laser-induced magnetization dynamics of the lanthanide ferromagnets Gadolinium (Gd), Terbium (Tb) and their alloys is investigated using femtosecond (fs) time-resolved x-ray magnetic circular dichroism (XMCD), the magneto-optical Kerr effect (MOKE) and magnetic second harmonic generation (MSHG). The magnetization dynamics is analyzed from the time scale of a few fs up to several hundred picoseconds (ps). The contributions of electrons, phonons, spin fluctuations, as well as the temporal regimes corresponding to the spin-orbit and exchange interactions are disentangled. In addition to possible applications in magnetic storage devices, understanding magnetization dynamics in lanthanides is also important because of their different magnetic structure compared to well-studied itinerant ferromagnets. Lanthanides are model Heisenberg-ferromagnets with localized 4f magnetic moments and long range magnetic ordering through indirect exchange interaction. By optical excitation of the conduction electrons, which mediate the exchange interaction, and studying the induced dynamics of the localized 4f and delocalized 5d6s magnetic moments, one can obtain insight into the angular momentum transfer at ultrafast time scales. Moreover, lanthanides offer the possibility to tune spin-lattice coupling via the 4f shell occupation and the concomitant changes in the 4f spin and orbital moments due to Hund's rules. Utilizing this fact, the importance of spin-lattice coupling in laser-induced demagnetization is also analyzed by comparing the magnetization dynamics in Gd and Tb. By investigating the magnetization dynamics of localized 4f moments of Gd and Tb using time-resolved XMCD, it is found that the demagnetization proceeds in both metals in two time scales, following fs laser excitation, which are classified as: (i) non-equilibrium (t > 1 ps), with respect to equilibration of electron and phonon temperatures. The

  7. W3CoB3-type {Y, Gd - Ho}3Co4-xAlx (x=0.5-1) rare earth compounds: Specific features of crystal structure and magnetic ordering

    Science.gov (United States)

    Morozkin, A. V.; Garshev, A. V.; Knotko, A. V.; Yapaskurt, V. O.; Isnard, O.; Yao, Jinlei; Nirmala, R.; Quezado, S.; Malik, S. K.

    2017-07-01

    The crystal structure of new W3CoB3-type {Y, Gd - Ho}3Co3.25Al0.75, Gd3Co3.5Al0.5 and Tb3Co3Al compounds (Cmcm. N 63, oC28) has been established using powder X-ray diffraction studies. The magnetic properties of Gd3Co3.5Al0.5, Gd3Co3.25Al0.75 and Tb3Co3.25Al0.75 were determined by bulk magnetization measurements and neutron diffraction studies. Gd3Co0.5Al0.5, Gd3Co3.25Al0.75 and Tb3Co3.25Al0.75 exhibit ferrimagnetic ordering below 196 K, 161 K and 151 K, respectively. Tb3Co3.25Al0.75 shows a spin-reorientation transition at 42 K. Below the ferrimagnetic ordering temperature Gd3Co3.25Al0.75 and Tb3Co3.25Al0.75 are soft ferrimagnets, meanwhile Tb3Co3.25Al0.75 shows magnetic hardness below the spin-reorientation transition with remanent magnetization per formula unit of 9.7 μB and coercive field of 15 kOe at 2 K. The magnetocaloric effects of Gd3Co3.25Al0.75 and Tb3Co3.25Al0.75 were calculated in terms of isothermal magnetic entropy change and they reach maximum values of -4.9 J/kg·K at 135-145 K and -3.7 J/kg·K at 115-135 K, respectively, for a field change of 0-50 kOe. Low temperature magnetic ordering in Tb3Co3.25Al0.75 is accompanied by a positive magnetocaloric effect with isothermal magnetic entropy changes of +13.6 J/kg·K at 10 K for a field change of 0-50 kOe and +0.9 J/kg K at 45 K for a field change of 0-10 kOe. Neutron diffraction study in zero applied field shows mixed ferro-antiferromagnetic ordering of Tb3Co3.25Al0.75 with a wave vector K0=[0, 0, 0]. Below 137 K Tb3Co3.25Al0.75 exhibits non-collinear ferrimagnetic ordering of terbium and cobalt sublattices with resulting of b-axis ferromagnetic and c-axis antiferromagnetic components of Cmc‧m={1, mx}×{1, mz/[0, 0, 1/2]}×{1, i‧}×{1, 1/[1/2, 1/2, 0]} magnetic space group. The spin-reorientation transition in Tb3Co3.25Al0.75 below 38 K corresponds to appearance of additional a-axis ferromagnetic component and decreasing of symmetry of magnetic ordering down to C2‧/c={1, mz/[0, 0, 1/2]}×{1, i

  8. Poster Session A

    Science.gov (United States)

    2009-01-01

    . Neumann2, C. Scheler2, and M. W. Linscheid1 1Humboldt-Universitaet zu Berlin, Germany; 2Proteome Factory AG, Berlin, Germany Quantitative peptide and protein analysis is one of the most promising fields in modern life science. Besides stable isotope coded labeling, metal chelate complexes are an alternative tool for quantification. The development of metal-coded affinity tags (MeCAT) was aimed to provide a robust tool for the quantification of peptides and proteins by utilizing lanthanideharboring metal tags. It was shown that MeCAT is suited for relative quantification of proteins via standard mass spectrometric methods. The approach of tagging biomolecules with MeCAT offers the unique advantage of absolute quantification via inductively coupled plasma mass spectrometry (ICPMS), a well established technique for assessing concentrations down to low attomole ranges. Proteins and peptides are labeled by MeCAT reagents which contain an amino acid residue-reactive labeling group and an element tag loaded with a lanthanide ion. By using different lanthanides such as Lutetium, Holmium, Thulium and Terbium in the MeCAT reagent, multiplex experiments can be performed to analyze several protein samples simultaneously in a proteomic study. After MeCAT labeling peptides and proteins are separated by common chromatography or electrophoresis techniques and quantified by LC/ESI MS or Inductively Coupled Plasma Mass Spectrometry (ICPMS) detecting the amount of MeCAT metal as a measure for quantity of the protein. If required, proteins of interest are identified by nanoLC/ESI MSn. In this work we investigated the compatibility of MeCAT labeling to analysis workflows such as nano liquid chromato-graphy/electrospray ionization tandem mass spectrometry (nano-LC/ESI-MSn) and electrophoresis followed by FIA/ICPMS. Focus was given to the separation behavior of labeled peptides and proteins as well as the dynamic range of detection. Furthermore, we demonstrated that MeCAT complexes are stable