WorldWideScience

Sample records for tension incorporando tecnicas

  1. A high sensibility technique to detect the incipient defects in high tension bushings; Una tecnica de alta sensibilidad para detectar defectos incipientes en boquillas de alta tension

    Energy Technology Data Exchange (ETDEWEB)

    Robles Pimentel, Edgar; Mestizo Rivera, Antolin; Romero Camberos, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    In this article a testing technique to locate incipient faults in transformer bushings is reported, specifically the one related to the internal disconnection of the capacitive tap, which is exemplified with a device having a problem of this kind. [Espanol] En el presente articulo se reporta una tecnica de prueba para localizar fallas incipientes en las boquillas de los transformadores, especificamente la relacionada con la desconexion interna del tap capacitivo, lo cual se ejemplifica con un dispositivo que padece un problema de ese tipo.

  2. Adaptive coordination of protective relaying in Ehv transmission using artificial intelligence and parallel processing; Esquema adaptativo para la coordinacion de reles de proteccion en redes de transmission de alta tension incorporando tecnicas de inteligencia artificial y procesamiento en paralelo

    Energy Technology Data Exchange (ETDEWEB)

    Orduna, E.; Garces, F; Rivera, J.F. [Univ. Nacional de San Juan, San Juan (Argentina). Instituto de Energia Eletrica; Handschin, E. [Dortmund Univ. (Germany). Lehrstuhl fuer Elektrische Energieversorgung

    1994-12-31

    The protection systems of electric power systems have as function to detect failures as soon possible and isolate the failed component. Considering that the main protection system may fail, protection in the elements adjacent to the failed one must act as a spare, observing an actuation time delay to accomplish selectivity criteria. This work presents the system named CORPRO developed in order to enable the fast determination of adjustments of relays coordination in electric power transmission lines for real time adaptive protection system 9 refs., 8 figs., 4 tabs.

  3. Desarrollo a escala de laboratorio de un antiséptico y cicatrizante para uso veterinario incorporando ingredientes naturales

    OpenAIRE

    Fernández Sierra, Laura; Moreno Gómez, Natacha

    2009-01-01

    Con este proyecto se evalúa la posibilidad de desarrollar un antiséptico y cicatrizante para animales a escala de laboratorio, incorporando miel de abejas y Aloe vera como ingredientes activos del producto -- Los ensayos preliminares consistieron en la evaluación de las formulaciones por medio de pruebas de pre-estabilidad entre los diferentes componentes con el extracto etanólico de la miel a temperatura ambiente, y pruebas de estabilidad de cada tratamiento a 4ºC, 50ºC y temperatura ambient...

  4. Surface Tension

    Science.gov (United States)

    Theissen, David B.; Man, Kin F.

    1996-01-01

    The effect of surface tension is observed inmany everyday situations. For example, a slowly leaking faucet drips because the force surface tension allows the water to cling to it until a sufficient mass of water is accumulated to break free.

  5. Tension Headache

    Science.gov (United States)

    ... your head Tenderness on your scalp, neck and shoulder muscles Tension headaches are divided into two main categories — ... that monitor and give you feedback on body functions such as muscle tension, heart rate and blood pressure. You then ...

  6. Paralisis facial permanente: correccion quirurgica con la tecnica de Labbe

    National Research Council Canada - National Science Library

    Yangali, Ruben; Neme, Alex; Moreno, Kattia; Cuadros, Jerson

    2008-01-01

    La paralisis facial genera un gran deficit estetico y funcional. Las diversas tecnicas quirurgicas han ido evolucionando, a fin de corregir este defecto de la forma mas estructural y fisiologica posible...

  7. L'elettronica nella tecnica aerospaziale

    Directory of Open Access Journals (Sweden)

    F. SALZA

    1963-06-01

    Full Text Available L'elettronica reca un contributo essenziale alla tecnica
    aerospaziale in ogni fase di qualsiasi sua realizzazione.
    In fase di progetto è fondamentale l'impiego del calcolo analogico o
    digitale, di quello analogico-digitale e delle tecniche di simulazione.
    Nel volo spaziale la guida e la stabilizzazione si basano sull'uso di
    sistemi elettronici che sono anche impiegati largamente nella essenziale fase
    di preparazione al volo.
    Così pure le comunicazioni coi passeggeri e le telemisure sono possibili
    soltanto grazie all'impiego delle tecniche più avanzate delle telecomunicazioni.
    Si esamina infine la situazione attuale per ciò che si riferisce al grado
    di affidamento delle apparecchiature elettroniche in conseguenza della loro
    crescente complessità: l'impiego di elementi allo stato solido e di adeguate
    tecniche circuitali consente di conservarlo ad un valore accettabile nonostante
    la crescente complicazione degli apparati in conseguenza delle sempre più
    gravi esigenze.

  8. Faculty Activity Analysis in the Universidad Tecnica Del Estado Campuses.

    Science.gov (United States)

    Karadima, Oscar

    An analysis of academic activities of college faculty at the eight campuses of Chile's Universidad Tecnica del Estado was conducted. Activities were grouped into seven categories: direct teaching, indirect teaching, research, community services, faculty development, academic administration, and other activities. Following the narrative…

  9. The insulation condition diagnosis of high tension generator stators; Diagnostico del estado de aislamiento de estatores de generadores de alta tension

    Energy Technology Data Exchange (ETDEWEB)

    Robles Pimentel, Edgar Guillermo; Rosales Sedano, Inocente [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    The high tension electrical generators are very high cost equipment, therefore they need to be very reliable. The generators preventive maintenance based in diagnosis techniques of the insulation condition might mean substantial savings for the user. In this article the most common techniques employed all over the world are presented, the greatest part of them already implemented in Mexico by the authors. The techniques and the equipment employed are analyzed and are exemplified with the results obtained in some field experiences. [Espanol] Los generadores electricos de alta tension son equipos de muy alto costo, por lo que necesitan ser muy confiables. El mantenimiento preventivo de los generadores basado en tecnicas de diagnostico del estado del aislamiento puede significar ahorros sustanciales al usuario. En este articulo se presentan las tecnicas mas comunes empleadas en el mundo, la mayor parte de ellas ya implantadas en Mexico por los autores. Se analizan las tecnicas y el equipo empleado, y se ejemplifica con resultados obtenidos de algunas de las experiencias en el campo.

  10. Cirugia de abdomen abierto en gineco obstetricia: indicaciones, tecnica y manejo

    National Research Council Canada - National Science Library

    Forero, Juan Carlos; Rodriguez, Jorge Augusto

    2005-01-01

    ... y las nuevas tecnicas quirurgicas de la cirugia de abdomen abierto para el manejo adecuado de estas entidades. Palabras clave: sindrome compartimiento abdominal, hipertension intraabdominal, tecnicas sutura. SUMMARY Intentional open abdominal management of severe pathologies is becoming increasingly common in obstetrics when dealing wi...

  11. Tecnicas para la deteccion de Cryptosporidium sp. en sistemas de tratamiento de agua residual

    National Research Council Canada - National Science Library

    Arnedo, Ivonne; Bracho, Mariangela; Diaz-Suarez, Odelis; Botero, Ligia

    2008-01-01

    En este trabajo se evaluo la aplicabilidad de la tecnicas de tincion de Kinyoun e Inmunofluorescencia, para el monitoreo periodico de la calidad parasitologica del agua residual del Sistema de Lagunas...

  12. Proyecto PRACTICE: Evaluación de alternativas de gestión frente a la desertificación incorporando la participación y experiencias locales

    NARCIS (Netherlands)

    Llovet López, J.; Alloza, J.A.; Bautista, S.; Guixot, L.; Mayor, A.G.; Murias, C.; Vilagrosa, A.; Rámon Vallejo, V.

    2013-01-01

    El proyecto PRACTICE (Prevention and Restoration Actions to Combat Desertification. An Integrated Assessment) del 7º programa marco de la Comisión Europea, ha desarrollado metodologías para la evaluación de alternativas de gestión destinadas a la lucha contra la desertificación, incorporando el

  13. Skin tension related to tension reduction sutures.

    Science.gov (United States)

    Hwang, Kun; Kim, Han Joon; Kim, Kyung Yong; Han, Seung Ho; Hwang, Se Jin

    2015-01-01

    The aim of this study was to compare the skin tension of several fascial/subcutaneous tensile reduction sutures. Six upper limbs and 8 lower limbs of 4 fresh cadavers were used. At the deltoid area (10 cm below the palpable acromion) and lateral thigh (midpoint from the palpable greater trochanter to the lateral border of the patella), and within a 3 × 6-cm fusiform area of skin, subcutaneous tissue defects were created. At the midpoint of the defect, a no. 5 silk suture was passed through the dermis at a 5-mm margin of the defect, and the defect was approximated. The initial tension to approximate the margins was measured using a tensiometer.The tension needed to approximate skin without any tension reduction suture (S) was 6.5 ± 4.6 N (Newton). The tensions needed to approximate superficial fascia (SF) and deep fascia (DF) were 7.8 ± 3.4 N and 10.3 ± 5.1 N, respectively. The tension needed to approximate the skin after approximating the SF was 4.1 ± 3.4 N. The tension needed to approximate the skin after approximating the DF was 4.9 ± 4.0 N. The tension reduction effect of approximating the SF was 38.8 ± 16.4% (2.4 ± 1.5 N, P = 0.000 [ANOVA, Scheffé]). The tension reduction effect of approximating the DF was 25.2% ± 21.9% (1.5 ± 1.4 N, P = 0.001 [ANOVA, Scheffé]). The reason for this is thought to be that the SF is located closely to the skin unlike the DF. The results of this study might be a basis for tension reduction sutures.

  14. Demonstration of Surface Tension.

    Science.gov (United States)

    Rosenthal, Andrew J.

    2001-01-01

    Surface tension is a fundamental obstacle in the spontaneous formation of bubbles, droplets, and crystal nuclei in liquids. Describes a simple overhead projector demonstration that illustrates the power of surface tension that can prevent so many industrial processes. (ASK)

  15. Permanent tensions in organization.

    Science.gov (United States)

    Jansson, Noora

    2015-01-01

    The purpose of this paper is to investigate the relationship between permanent tensions and organizational change. This study used paradox theory and a case study. The case organization is a public university hospital in Finland involving several stakeholders. The analysis suggests that the relationship between permanent tensions and organizational change is a paradox that is part of organizational reality. As an organization learns to live with its permanent tensions, the renewal paradox settles into equilibrium. When tensions are provoked, the paradox is disturbed until it finds a new balance. This flexible nature of the paradox is the force that keeps the different stakeholders simultaneously empowered to maintain their unique missions and cohesive in order to benefit from the larger synergy. This research suggests that identification and evaluation of each permanent tension within an organization is important when executing organizational change. The fact that certain tensions are permanent and cannot be solved may have an influence on how planned change initiatives are executed. The results show that permanent tensions may be harnessed for the benefit of an organizational change. This research demonstrates originality by offering an alternative view of tensions, a view which emphasizes not only their permanent and plural nature but their importance for enabling the organization to change at its own, non-disruptive pace. The research also proposes a new concept, the "renewal paradox", to enhance understanding of the relationship between permanent tensions and organizational change.

  16. Tensions in Distributed Leadership

    Science.gov (United States)

    Ho, Jeanne; Ng, David

    2017-01-01

    Purpose: This article proposes the utility of using activity theory as an analytical lens to examine the theoretical construct of distributed leadership, specifically to illuminate tensions encountered by leaders and how they resolved these tensions. Research Method: The study adopted the naturalistic inquiry approach of a case study of an…

  17. Aceptacion de las tecnicas de manejo farmacologicas y no farmacologicas en padres de pacientes pediatricos en odontologia

    National Research Council Canada - National Science Library

    Gonzalo Alvarez, Luis; Cordero, Nicolas; Cardenas, Juan Manuel

    2012-01-01

    Introduccion y Objetivo: Los constantes cambios en el entorno socio-cultural y en las condiciones etico-legales exigen que se evaluen continuamente las tecnicas de manejo de la conducta del paciente pediatrico...

  18. Aceptacion de las tecnicas de manejo farmacologicas y no farmacologicas en padres de pacientes pediatricos en odontologia

    National Research Council Canada - National Science Library

    Gonzalo Alvarez, Luis; Cordero, Nicolas; Cardenas, Juan Manuel

    2012-01-01

    .... Identificar el nivel de aceptacion que tienen los padres frente a las tecnicas farmacologicas y no farmacologicas para el manejo de la conducta en el tratamiento del paciente pediatrico en odontologia...

  19. Optic nerve oxygen tension

    DEFF Research Database (Denmark)

    la Cour, M; Kiilgaard, Jens Folke; Eysteinsson, T

    2000-01-01

    To investigate the influence of acute changes in intraocular pressure on the oxygen tension in the vicinity of the optic nerve head under control conditions and after intravenous administration of 500 mg of the carbonic anhydrase inhibitor dorzolamide....

  20. Tension-filled Governance?

    DEFF Research Database (Denmark)

    Celik, Tim Holst

    on the statesituated tension-filled functional relationship between legitimation and accumulation, the study both historically and theoretically reworks this approach and reapplies it for the post-1970s/1990s governance period. It asks whether and to what extent governance has served as a distinctive post- 1970s/1990s...... state-facilitated way of bridging/altering the tension-filled relationship between legitimation and fiscal accumulation in Western European liberal-capitalist democratic polities....

  1. Optic nerve oxygen tension

    DEFF Research Database (Denmark)

    la Cour, M; Kiilgaard, Jens Folke; Eysteinsson, T

    2000-01-01

    To investigate the influence of acute changes in intraocular pressure on the oxygen tension in the vicinity of the optic nerve head under control conditions and after intravenous administration of 500 mg of the carbonic anhydrase inhibitor dorzolamide.......To investigate the influence of acute changes in intraocular pressure on the oxygen tension in the vicinity of the optic nerve head under control conditions and after intravenous administration of 500 mg of the carbonic anhydrase inhibitor dorzolamide....

  2. Membrane tension and membrane fusion

    OpenAIRE

    Kozlov, Michael M.; Chernomordik, Leonid V.

    2015-01-01

    Diverse cell biological processes that involve shaping and remodeling of cell membranes are regulated by membrane lateral tension. Here we focus on the role of tension in driving membrane fusion. We discuss the physics of membrane tension, forces that can generate the tension in plasma membrane of a cell, and the hypothesis that tension powers expansion of membrane fusion pores in late stages of cell-to-cell and exocytotic fusion. We propose that fusion pore expansion can require unusually la...

  3. Surface Tension of Spacetime

    Science.gov (United States)

    Perko, Howard

    2017-01-01

    Concepts from physical chemistry and more specifically surface tension are introduced to spacetime. Lagrangian equations of motion for membranes of curved spacetime manifold are derived. The equations of motion in spatial directions are dispersion equations and can be rearranged to Schrodinger's equation where Plank's constant is related to membrane elastic modulus. The equation of motion in the time-direction has two immediately recognizable solutions: electromagnetic waves and corpuscles. The corpuscular membrane solution can assume different genus depending on quantized amounts of surface energy. A metric tensor that relates empty flat spacetime to energetic curved spacetime is found that satisfies general relativity. Application of the surface tension to quantum electrodynamics and implications for quantum chromodynamics are discussed. Although much work remains, it is suggested that spacetime surface tension may provide a classical explanation that combines general relativity with field theories in quantum mechanics and atomic particle physics.

  4. Analytic techniques to quantify Tetrachlorohydroquinone and Chloranil; Tecnicas analiticas para cuantificar Tetraclorohidroquinona y Cloranilo

    Energy Technology Data Exchange (ETDEWEB)

    Castillo Escobedo, Ma. Teresa; Gutierrez de Gonzalez, Luz Ma; Gojon Zorrilla, Gabriel [Universidad Autonoma de Nuevo Leon, Monterrey, Nuevo Leon (Mexico)

    1995-02-01

    Tetrachlorohydroquinone (TCHQ) was determined by two methods: iodometry and cerimetry. Tritation with aqueous ceric ammonium sulphate using potentiometric end-point detection proved to be the method of choice on account of its coefficient of variation (CV=0.475%) and its excellent accuracy. Chloranil (TCQ) was quantified by titration with aqueous ascorbic acid in acetone-water-hexamethylene tetramine (HMT), the golden-yellow color of the TCQ-HMT complex disappearing at the end point. This method is accurate and has CV=0.396%. [Spanish] Se cuantifico la tetraclorohidroquinona (TCHQ) mediante una tecnica yodometrica y un metodo potenciometrico, basado en el uso de sulfato cerico amoniacal. Se concluyo que el metodo potenciometrico es el mejor, ya que tiene un coeficiente de variacion (CV) de 0.475%, y una exactitud muy aceptable. Se desarrollo un tecnica para cuantificar el Cloranilo (TCQ) por titulacion con Acido Ascorbico en presencia de Hexametilentetramina (HMT) en medio acetona-agua; el punto final se determino por la separacion del color amarillo oro del complejo TCQ-HMT. Esta tecnica presenta un coeficiente de variacion (CV) de 0.396% y una exactitud aceptable. Se realizaron pruebas de hipotesis para verificar la exactitud de los metodos elegidos.

  5. Tension-type headache

    DEFF Research Database (Denmark)

    Bendtsen, Lars; Jensen, Rigmor

    2009-01-01

    The substantial societal and individual burdens associated with tension-type headache (TTH) constitute a previously overlooked major public health issue. TTH is prevalent, affecting up to 78% of the general population, and 3% suffer from chronic TTH. Pericranial myofascial nociception probably...

  6. Social and environmental tensions

    DEFF Research Database (Denmark)

    Saito, Moeko; Rutt, Rebecca Leigh; Chhetri, Bir Bahadur Khanal

    2014-01-01

    to forests. Our case highlights the risk that the mere application of affirmative measures may give rise to difficult social and environmental tensions. Thus, this paper calls for such measures to effectively incorporate local perspectives in their designs and to be reflective, by allowing for regular...

  7. Optic nerve oxygen tension

    DEFF Research Database (Denmark)

    Kiilgaard, Jens Folke; Pedersen, D B; Eysteinsson, T

    2004-01-01

    The authors have previously reported that carbonic anhydrase inhibitors such as acetazolamide and dorzolamide raise optic nerve oxygen tension (ONPO(2)) in pigs. The purpose of the present study was to investigate whether timolol, which belongs to another group of glaucoma drugs called beta...

  8. Rein tension during canter

    NARCIS (Netherlands)

    Egenvall, Agneta; Eisersiö, Marie; Rhodin, Marie; van Weeren, P.R.|info:eu-repo/dai/nl/074628550; Roepstorff, Lars

    2015-01-01

    Riders generally use reins as a means for communication with the horse. At present, the signalling pattern is poorly understood. The aim of this study was to illustrate and analyse the rein tension patterns in a number of rider/horse combinations across a variety of exercises in the canter gait. Our

  9. Kyphoplasty: indications, contraindications and technique; Chifoplastica: indicazioni, controindicazioni e tecnica

    Energy Technology Data Exchange (ETDEWEB)

    Masala, Salvatore; Fiori, Roberto; Massari, Francesco; Simonetti, Giovanni [Tor Vergata Univ., Roma (Italy). Dipartimento di diagnostica per immagini e radiologia interventistica

    2005-07-15

    ) all'interno dei corpi vertebrali fratturati sotto guida fluoroscopica, previa distensione della spongiosa con due cateteri a palloncino dedicati. Scopo del nostro studio e stato quello di valutare indicazioni, controindicazioni, tecnica e risultati nella nostra iniziale casistica. Materiale e metodi. Da Gennaio a Maggio 2003 abbiamo trattato 11 Pazienti (5 M, 6 F) con crolli vertebrali datati meno di tre mesi su base osteoporotica e da mieloma (eta media 68,9), che presentavano dolore non responsivo ai trattamenti farmacologici. In tutti i Pazienti la procedura e stata eseguita su di un singolo livello (1 D7;1 D8; 2 D12; 3 L1; 3 L2; 1 L4). La selezione e stata fatta sulla base di un criterio clinico-strumentale; prima dell'intervento e stato effettuato, in tutti i pazienti un esame radiografico tradizionale, TC ed RM. E stato utilizzato il sistema di valutazione del dolore (Scala Analogica Visuale VAS) per verificare i risultati post-procedurali. Risultati. In tutti i Pazienti si e osservato un incremento in altezza del corpo vertebrale collassato associato a riduzione o scomparsa della sintomatologia dolorosa (modificazione della VAS da un valore pre-trattamento di 8 ad un valore post-trattamento di 2). Non si sono evidenziate complicanze legate alla procedura. Conclusioni. Le indicazioni alla Chifoplastica sono le fratture vertebrali recenti da compressione su base osteoporotica, da mieloma, metastasi ed angiomi vertebrali in presenza di dolore intrattabile ed in assenza di sintomatologia neurologica. Le principali contro indicazioni consistono in disordini della coagulazione, fratture instabili o collassi vertebrali (vertebra plana). Nei casi di sintomatologia dolorosa intrattabile da crollo vertebrale la Chifoplastica si e dimostrata una metodica sicura ed efficace con riduzione dei tempi di degenza ed immediato miglioramento della qualita di vita del Paziente.

  10. Surface tension of spherical drops from surface of tension

    Energy Technology Data Exchange (ETDEWEB)

    Homman, A.-A.; Bourasseau, E. [CEA/DAM DIF, F-91297 Arpajon Cedex (France); Stoltz, G. [Université Paris-Est, CERMICS (ENPC), INRIA, F-77455 Marne-la-Vallée (France); Malfreyt, P. [Institut de Chimie de Clermont-Ferrand, Université Blaise Pascal, UMR CNRS 6296, ICCF, BP 10448, F-63000 Clermont-Ferrand (France); Strafella, L.; Ghoufi, A., E-mail: aziz.ghoufi@univ-rennes1.fr [Institut de Physique de Rennes, Université de Rennes 1 UMR 6251 CNRS, 263 avenue Général Leclerc, 35042 Rennes (France)

    2014-01-21

    The determination of surface tension of curved interfaces is a topic that raised many controversies during the last century. Explicit liquid-vapor interface modelling (ELVI) was unable up to now to reproduce interfacial behaviors in drops due to ambiguities in the mechanical definition of the surface tension. In this work, we propose a thermodynamic approach based on the location of surface of tension and its use in the Laplace equation to extract the surface tension of spherical interfaces from ELVI modelling.

  11. Surface Tension and Capillary Rise

    Science.gov (United States)

    Walton, Alan J.

    1972-01-01

    Discussion of the shortcomings of textbook explanations of surface tension, distinguishing between concepts of tension and capillary rise. The arguments require only a clear understanding of Newtonian mechanics, notably potential energy. (DF)

  12. Cable tensioned membrane solar collector module with variable tension control

    Science.gov (United States)

    Murphy, Lawrence M.

    1985-01-01

    Disclosed is a solar collector comprising a membrane for concentrating sunlight, a plurality of elongated structural members for suspending the membrane member thereon, and a plurality of control members for adjustably tensioning the membrane member, as well as for controlling a focus produced by the membrane members. Each control member is disposed at a different corresponding one of the plurality of structural members. The collector also comprises an elongated flexible tensioning member, which serves to stretch the membrane member and to thereafter hold it in tension, and a plurality of sleeve members, which serve to provide the membrane member with a desired surface contour during tensioning of the membrane member. The tensioning member is coupled to the structural members such that the tensioning member is adjustably tensioned through the structural members. The tensioning member is also coupled to the membrane member through the sleeve members such that the sleeve members uniformly and symmetrically stretch the membrane member upon applying tension to the tensioning member with the control members.

  13. Strategic Planning for Institutions of Higher Education: A Content Analysis for the Universidad Tecnica del Estado Planning System.

    Science.gov (United States)

    Karadima, Oscar

    Ten-year development plans of each of the eight campuses of the Universidad de Santiago de Chile, formerly called Universidad Tecnica del Estado, are evaluated, using content analysis. In addition to narrative descriptions, diagrams illustrate the features of each plan, which covers the period 1983-1993. Topics covered by the plans were grouped…

  14. La observacion participante y la deriva: dos tecnicas moviles para el analisis de la ciudad contemporanea. El caso de Barcelona

    National Research Council Canada - National Science Library

    Pellicer, Isabel; Vivas-Elias, Pep; Rojas, Jesus

    2013-01-01

    ..., mediante dos tecnicas moviles concretas: la observacion participante y la deriva, como esta metodologia es especialmente util para estudiar el contexto urbano actual y las practicas que en el se dan, ya que comparte la logica constitutiva de los fenomenos estudiados. PALABRAS CLAVE | ciudad global, movilidad, sociologia urbana ABSTRACT |...

  15. Dificultades para la apropiacion de tecnicas de conservacion de suelo en la zona de montana de Pedro Santana (Provincia Elias Pina, Republica Dominicana)

    National Research Council Canada - National Science Library

    May, Thomas

    2011-01-01

    ... que esto esta relacionado con la acumulacion de plagas de habichuelas en los restos vegetales muertos, y con los pocos beneficios percibidos de esta tecnica, mas que con la inversion en terminos de trabajo y dinero...

  16. Tecnica de reaccion de polimerasa en cadena (QPCR) en tiempo real para la identificacion y cuantificacion de streptococcus mutans en saliva y biopelicula dentaria de ninos

    National Research Council Canada - National Science Library

    Yevenes, Ismael; Reyes, Evelyn; Palma, Patricia; Faleiros, Simone; Moncada, Gustavo; Corsini, Gino; Gordan, Valeria; Batista Oliveira Junior, Osmir; Del Carmen Duperat, Lorena; Neira, Miguel

    2016-01-01

    Introduccion: el objetivo del presente estudio consistio en implementar la tecnica de qPCR en tiempo real para identificar y cuantificar la especie Streptococcus mutans en muestras de saliva y biopelicula dentaria. Metodos...

  17. Holding the Tension.

    Science.gov (United States)

    Feudtner, Chris

    2016-05-01

    My colleagues and I had been asked by a member of a clinical team to help sort through the ethics of stopping a life-sustaining intervention for a very ill child. We had already talked with the parents, the physicians, and the folks from nursing, social work, and chaplaincy. Terms like "suffering," "cruel," "compassion," and "moral distress" had been uttered, as had terms like "inappropriate," "unethical," "neglectful," and "risk-management." The group had now stuffed all of these polarizing thoughts and feelings into this cramped room with only one door. And everyone was looking at me. What skill, competency, or inner capacity must one possess to hold and manage such tension? © 2016 The Hastings Center.

  18. Surface tension of aqueous humor.

    Science.gov (United States)

    Ross, Andrew; Blake, Robert C; Ayyala, Ramesh S

    2010-09-01

    To measure and compare the surface tension of aqueous humor in patients with and without glaucoma. The surface tension of aqueous humor was measured using a commercially available instrument and software that were validated by using a known fluid (deionized water and methanol). Analysis of aqueous and vitreous samples obtained from 20 rabbit eyes showed that the system could be used successfully for small amounts of ocular fluid. The effect of glaucoma drugs on the surface tension of aqueous humor was then studied in a rabbit model. Comparison of aqueous humor from 66 patients with glaucoma and 53 patients with cataracts but no glaucoma was carried out. The surface tension of rabbit aqueous humor was 65.9 ± 1.2; vitreous, 60.6 ± 2.6; and balanced salt solution, 70.7 ± 0.9. Timolol and latanoprost did not alter the surface tension of the aqueous humor in the rabbit model. The average surface tension of human aqueous humor was 63.33 ± 4.0 (glaucomatous eyes) and 66.19 ± 2.64 (nonglaucomatous eyes with cataracts) (P=0.0001). A technique of measuring the surface tension from small quantities of aqueous humor is validated. Surface tension of the aqueous humor in glaucoma patients was less than that of cataract patients.

  19. Gestión de procesos incorporando la gestión del capital intelectual y la gestión del conocimiento: un estudio de aplicación a centros de investigación

    Directory of Open Access Journals (Sweden)

    Enrique Saravia Vergara

    2010-10-01

    Full Text Available En el actual entorno competitivo, las organizaciones buscan crear valor para el cliente mediante enfoquesde gestión que no solo garanticen la oferta de bienes y servicios de calidad y a bajos precios, sino que logrenventajas competitivas a largo plazo. En este contexto, la gestión de procesos asoma como un modelo degestión basado en «calidad»; mientras que los modelos de gestión del «capital intelectual» y de «gestión delconocimiento» representan los principales modelos basados en la gestión de los activos intangibles, basedel éxito competitivo del siglo XXI.El presente estudio representa un ensayo que, a partir de un modelo de gestión de procesos aplicado a uncentro de investigación y de la revisión del marco teórico correspondiente a las disciplinas del «capitalintelectual» y la «gestión del conocimiento», analiza y propone un modelo de gestión de procesos en centrosde investigación incorporando la Gestión del Capital Intelectual y la Gestión del Conocimiento.

  20. Managing tension headaches at home

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000421.htm Managing tension headaches at home To use the sharing ... have glasses, use them. Learn and practice stress management. Some people find relaxation exercises or meditation helpful. ...

  1. Tension pneumocephalus: Mount Fuji sign

    Directory of Open Access Journals (Sweden)

    Pulastya Sanyal

    2015-01-01

    Full Text Available A 13-year-old male was operated for a space occupying lesion in the brain. A noncontrast computed tomography scan done in the late postoperative period showed massive subdural air collection causing compression of bilateral frontal lobes with widening of interhemispheric fissure and the frontal lobes acquiring a peak like configuration - causing tension pneumocephalus-"Mount Fuji sign." Tension pneumocephalus occurs when air enters the extradural or intradural spaces in sufficient volume to exert a mass or pressure effect on the brain, leading to brain herniation. Tension pneumocephalus is a surgical emergency, which needs immediate intervention in the form of decompression of the cranial cavity by a burr hole or needle aspiration. The Mount Fuji sign differentiates tension pneumocephalus from pneumocephalus.

  2. Tension pile study : final report.

    Science.gov (United States)

    1970-07-01

    This report contains the results of a short term study of a pile in tension loads. The piles tested were driven on Louisiana Department of Highway's property in response to preceding research work entitled "Stability of Slender Prestressed Concrete P...

  3. Techniques for contact and contact with friction problems; Tecnicas para problemas de contacto y contacto con friccion

    Energy Technology Data Exchange (ETDEWEB)

    Velandia Arana, Gonzalo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    Different numerical techniques are presented based in the finite element method to obtain numerical solutions to contact and contact with friction problems between solid bodies, and compared between each other. [Espanol] Se presentan diferentes tecnicas numericas basadas en el metodo de elementos finitos para la obtencion de soluciones numericas de problemas de contacto y contacto con friccion entre cuerpos solidos, y se comparan entre si.

  4. Estudio de la naturaleza y distribucion de defectos en obleas de GaAs mediante tecnicas de inyeccion de haces

    OpenAIRE

    Mendez Martín, Bianchi

    1991-01-01

    Los estudios realizados sobre el gaas presentados en esta memoria aportan información acerca de la naturaleza de defectos (dislocaciones y defectos puntuales) en obleas de gaas semiconductor y gaas semiaislante. El empleo de la catodoluminiscencia (cl) y la microscopia electroacustica de barrido (meab) de forma combinada nos ha permitido obtener resultados nuevos tanto acerca de las posibilidades de aplicación de estas tecnicas a semiconductores III-v como sobre la caracterización de las oble...

  5. Historical Tensions in Engineering Education

    DEFF Research Database (Denmark)

    Jamison, Andrew; Heymann, Matthias

    2012-01-01

    Ever since institutions for educating engineers first began to be ­established in Europe, there have been a number of fundamental tensions as to how that ­educating should best be conducted, what it should consist of, and who should do the educating. These tensions are based on different styles...... or approaches to ­engineering education that have developed historically in different parts of Europe and which have led to what we characterize as “theory-driven,” “practice-driven,” and “technology-driven” approaches. This chapter explores some of the historical roots of these tensions in medieval Europe...... and briefly traces their developmental trajectories through the subsequent formation of institutions of engineering ­education. It has been written as part of PROCEED (Program of Research on Opportunities and Challenges in Engineering Education in Denmark)....

  6. Diagnosis technique for the detection of mechanical faults in power breakers; Tecnica de diagnostico para la deteccion de fallas mecanicas en interruptores de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Linan, Roberto; Perez, Marciano; Estrada, J. Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This article reports a non-invasive diagnosis technique for the detection of mechanical faults in power breakers, supporting it with the recording and analysis of vibration signals of the equipment under test. Also, an assessment of four breakers using this technique is presented. [Espanol] En el presente articulo se reporta una tecnica de diagnostico no invasiva para detectar fallas mecanicas en interruptores de potencia, apoyandose en el registro y analisis de senales de vibracion del equipo bajo prueba. Asimismo, se presenta la evaluacion de cuatro interruptores usando esta tecnica.

  7. Tension type headaches: a review

    African Journals Online (AJOL)

    Acetaminophen (paracetamol) 500-1 000 mg and aspirin 500-. 1 000 mg, have been demonstrated to be an effective first-line treatment for episodic tension-type headaches in most placebo- controlled trials. 23,24 Fast absorptive formulations of the latter are preferred for rapidity of action.25 It is worth noting that these.

  8. Abolishing the maximum tension principle

    Directory of Open Access Journals (Sweden)

    Mariusz P. Da̧browski

    2015-09-01

    Full Text Available We find the series of example theories for which the relativistic limit of maximum tension Fmax=c4/4G represented by the entropic force can be abolished. Among them the varying constants theories, some generalized entropy models applied both for cosmological and black hole horizons as well as some generalized uncertainty principle models.

  9. Headache (chronic tension-type).

    Science.gov (United States)

    Krishnan, Anita; Silver, Nicholas

    2009-07-22

    Chronic tension-type headache (CTTH) is a disorder that evolves from episodic tension-type headache, with daily or very frequent episodes of headache lasting minutes to days. It affects 4.1% of the general population in the USA, and is more prevalent in women (up to 65% of cases). We conducted a systematic review and aimed to answer the following clinical questions: What are the effects of drug treatments for chronic tension-type headache? What are the effects of non-drug treatments for chronic tension-type headache? We searched: Medline, Embase, The Cochrane Library, and other important databases up to March 2007 (Clinical Evidence reviews are updated periodically; please check our website for the most up-to-date version of this review). We included harms alerts from relevant organisations such as the US Food and Drug Administration (FDA) and the UK Medicines and Healthcare products Regulatory Agency (MHRA). We found 50 systematic reviews, RCTs, or observational studies that met our inclusion criteria. We performed a GRADE evaluation of the quality of evidence for interventions. In this systematic review, we present information relating to the effectiveness and safety of the following interventions: acupuncture; amitriptyline; analgesics; anticonvulsant drugs; benzodiazepines; botulinum toxin; chiropractic and osteopathic manipulations; cognitive behavioural therapy (CBT); Indian head massage; mirtazapine; relaxation and electromyographic biofeedback; selective serotonin reuptake inhibitor antidepressants (SSRIs); and tricyclic antidepressants (other than amitriptyline).

  10. CALCULATION OF TENSION FORCE OF BELT CONVEYOR

    OpenAIRE

    Ismet Ibishi; Ahmet Latifi; Gzim Ibishi; Kadri Sejdiu; Melihate Shala-Galica; Bekim Latifi

    2012-01-01

    In this paper is done the explanation on tension fashion of the belt conveyor which is employed in Kosovo Energy Corporation – KEK, for coal transportation to provide electric power plant. The aim of the paper enables to recognize tension forces not to pass with deformation of belt so that this problem will damage the workingprocess. Work principle is based on initial tension and tension during working process. The fact is known that the tension starts from the carriage on the way to tension ...

  11. Core vs. Bulk Samples in Soil-Moisture Tension Analyses

    Science.gov (United States)

    Walter M. Broadfoot

    1954-01-01

    The usual laboratory procedure in determining soil-moisture tension values is to use "undisturbed" soil cores for tensions up to 60 cm. of water and bulk soil samples for higher tensions. Low tensions are usually obtained with a tension table and the higher tensions by use of pressure plate apparatus. In tension analysis at the Vicksburg Infiltration Project...

  12. Application techniques of coatings by thermal projection; Tecnicas de aplicacion de recubrimientos por proyeccion termica

    Energy Technology Data Exchange (ETDEWEB)

    Porcayo Calderon, Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    The coatings applied by thermal projection have an important number of applications in different industries (chemical, oil, electric, nuclear, etc.). The main purpose of the protection by means of coatings is to alter the surface characteristics of a component so as to resist corrosive environments, abrasion and erosion, among others. The coatings can be applied by different methods, but due to the fact that its characteristics appreciably differ from the base metal, it is important the knowledge of its properties when a coating is selected for a specific use. In this article the characteristics of the applied coatings by thermal projection, the factors that affect its performance and the principal application techniques, are described. [Espanol] Los recubrimientos aplicados por proyeccion termica tienen un numero importante de aplicaciones en diferentes industrias (quimica, petrolera, electrica, nuclear, etc.). El proposito principal de la proteccion por medio de recubrimientos es alterar las caracteristicas de la superficie de un componente de manera que resista ambientes corrosivos, abrasion y erosion, entre otros. Los recubrimientos pueden aplicarse por diferentes metodos, pero debido a que sus propiedades difieren apreciablemente de las del metal base, es importante el conocimiento de sus propiedades cuando se selecciona un recubrimiento para un uso especifico. En este articulo se describen las caracteristicas de los recubrimientos aplicados por proyeccion termica, los factores que afectan su desempeno y las principales tecnicas de aplicacion.

  13. Techniques of thermal energy conservation; Tecnicas de conservacion de la energia termica

    Energy Technology Data Exchange (ETDEWEB)

    Caltenco Estevez, Juan Luis; Roblez Lopez, Francisco; Ceballos Serna, Andres Alberto [Instituto Mexicano del Petroleo (Mexico)

    1996-07-01

    In modern industry the thermal energy is the energy more intensely used, which implies that in the processes and equipment that operate based on it, rely the greatest opportunities for saving . In this paper some saving and conservation techniques of thermal energy, which nowadays have been developed, are presented, whose application has helped to the successful attainment of the objectives of increased productivity of industrial plants, with the additional benefit of reducing the environmental impact of the production activities. [Spanish] En la industria moderna la energia termica es la forma de energia mas intensamente utilizada, lo cual implica que en los procesos y equipos que operan basandose en esta, residan las mayores oportunidades de ahorro. En este trabajo se presentan algunas de las tecnicas de ahorro y conservacion de energia termica, que hoy en dia se han desarrollado, cuya aplicacion ha coadyuvado a la consecucion exitosa de los objetivos de incremento de la productividad de plantas industriales, con el beneficio adicional de reducir el impacto ambiental de las actividades productivas.

  14. Actin cortex architecture regulates cell surface tension.

    Science.gov (United States)

    Chugh, Priyamvada; Clark, Andrew G; Smith, Matthew B; Cassani, Davide A D; Dierkes, Kai; Ragab, Anan; Roux, Philippe P; Charras, Guillaume; Salbreux, Guillaume; Paluch, Ewa K

    2017-06-01

    Animal cell shape is largely determined by the cortex, a thin actin network underlying the plasma membrane in which myosin-driven stresses generate contractile tension. Tension gradients result in local contractions and drive cell deformations. Previous cortical tension regulation studies have focused on myosin motors. Here, we show that cortical actin network architecture is equally important. First, we observe that actin cortex thickness and tension are inversely correlated during cell-cycle progression. We then show that the actin filament length regulators CFL1, CAPZB and DIAPH1 regulate mitotic cortex thickness and find that both increasing and decreasing thickness decreases tension in mitosis. This suggests that the mitotic cortex is poised close to a tension maximum. Finally, using a computational model, we identify a physical mechanism by which maximum tension is achieved at intermediate actin filament lengths. Our results indicate that actin network architecture, alongside myosin activity, is key to cell surface tension regulation.

  15. Light Scattering by Surface Tension Waves.

    Science.gov (United States)

    Weisbuch, G.; Garbay, F.

    1979-01-01

    This simple and inexpensive experiment is an illustration of the physical concepts of interaction between light and surface tension waves, and provides a new method of measuring surface tension. (Author/GA)

  16. SURFACE TENSION TECHNIQUES FOR MOLTEN SALTS

    Science.gov (United States)

    Some 200 surface tension determinations were made on 107 single-salt melts using eight experimental techniques. From a consideration of the... surface tension range of applicability and temperature limitation for these techniques are briefly considered.

  17. A TOGgle for Tension at Kinetochores

    OpenAIRE

    Cheerambathur, Dhanya K.; Prevo, Bram; Desai, Arshad

    2016-01-01

    Differential stability of kinetochore-microtubule attachments at low versus high tension is critical for accurate chromosome segregation. Miller et al. find that a TOG domain microtubule-binding protein imparts intrinsic tension selectivity to kinetochore-microtubule attachments.

  18. Modern techniques for the emissions control in thermal electric stations; Tecnicas modernas para el control de emisiones en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Romo Millares, C. A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    This paper presents the techniques and the control equipment for emissions in thermal stations that have the highest possibilities of being considered in the immediate future in the national energy panorama and the established frame for the environmental normativity. The pollutant compounds subject to revision are the nitrogen and sulfur oxides and unburned particles. [Espanol] Se presentan las tecnicas y equipos de control de emisiones para centrales termoelectricas que tienen mayores posibilidades de ser consideradas en el futuro inmediato dentro del panorama energetico nacional y el marco establecido por la normatividad ambiental. Los compuestos contaminantes sujetos a revision son los oxidos de nitrogeno y azufre y las particulas inquemadas.

  19. LIF characterization of ancient umber ceramics and frescos; Applicazione della tecnica LIF alle antiche ceramiche umbre e agli affreschi

    Energy Technology Data Exchange (ETDEWEB)

    Fantoni, R.; Palucci, A.; Ribezzo, S. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dipt. Innovazione; Borgia, I. [Perugia Univ., Perugia (Italy)

    1999-07-01

    The report shows the result carried out by the LIF (layer induced fluorescence) system developed for pigment analysis at ENEA (National Agency for New Technology, Energy and the Environment) Frascati research centre (Rome) . The frescos and ceramics by Umbria region (Italy) are analysed. [Italian] Vengono riportati i risultati ottenuti dall'indagine della fluorescenza indotta da laser su antiche ceramiche umbre e su affreschi. La tecnica e' stata anche utilizzata per determinare la fluorescenza dei pigmenti contenuti in campioni di affresco.

  20. Intraoperative Development of Tension Pneumocephalus in a ...

    African Journals Online (AJOL)

    Included is a literature review of studies discussing the role of N2O in the development of tension pneumocephalus. N2O is associated with tension pneumocephalus especially in the setting of preexisting pneumocephalus. Tension pneumocephalus can manifest as Cushing response and immediate decompression is ...

  1. The Plastic Tension Field Method

    DEFF Research Database (Denmark)

    Hansen, Thomas

    2005-01-01

    . The emphasis is attached to the presentation of a design method based on the diagonal tension field theory. Also, how to determine the load-carrying capacity of a given steel plate girder with transverse web stiffeners, is briefly presented. The load-carrying capacity may be predicted by applying both......This paper describes a calculation method for steel plate girders with transverse web stiffeners subjected to shear. It may be used for predicting the failure load or, as a design method, to determine the optimal amount of internal web stiffeners. The new method is called the plastic tension field...... method. The method is based on the theory of plasticity and is analogous to the so-called diagonal compression field method developed for reinforced concrete beams with transverse stirrups, which is adopted in the common European concrete code (Eurocode 2). Many other theories have been developed...

  2. Robust Tensioned Kevlar Suspension Design

    Science.gov (United States)

    Young, Joseph B.; Naylor, Bret J.; Holmes, Warren A.

    2012-01-01

    One common but challenging problem in cryogenic engineering is to produce a mount that has excellent thermal isolation but is also rigid. Such mounts can be achieved by suspending the load from a network of fibers or strings held in tension. Kevlar fibers are often used for this purpose owing to their high strength and low thermal conductivity. A suite of compact design elements has been developed to improve the reliability of suspension systems made of Kevlar.

  3. Dificultades para la apropiacion de tecnicas de conservacion de suelo en la zona de montana de Pedro Santana (Provincia Elias Pina, Republica Dominicana)

    National Research Council Canada - National Science Library

    May, Thomas

    2011-01-01

    .... Como alternativas se sugieren: la promocion de cultivos de cobertura y abono verde, las tecnicas alternativas de control de babosas, la reduccion de la alta predominancia del cultivo de habichuelas, la promocion de cultivos permanentes como frutales y el desarrollo de una economia forestal.

  4. Los curriculos de los programas academicos de contaduria publica, tras la ensenanza de lo internacional y la globalizacion en la contabilidad: necesidades de ajuste mas alla de respuestas tecnicas

    National Research Council Canada - National Science Library

    Rueda-Delgado, Gabriel; Pinzon-Pinto, Jorge Emiro; Patino-Jacinto, Ruth Alejandra

    2013-01-01

    ... de contaduria publica, pueden generarse transformaciones tecnicas e instrumentales para pasar de ensenar unas normas de alcance nacional, a otras emitidas por reguladores internacionales, por una parte, pero al...

  5. Small membranes under negative surface tension.

    Science.gov (United States)

    Avital, Yotam Y; Farago, Oded

    2015-03-28

    We use computer simulations and a simple free energy model to study the response of a bilayer membrane to the application of a negative (compressive) mechanical tension. Such a tension destabilizes the long wavelength undulation modes of giant vesicles, but it can be sustained when small membranes and vesicles are considered. Our negative tension simulation results reveal two regimes-(i) a weak negative tension regime characterized by stretching-dominated elasticity and (ii) a strong negative tension regime featuring bending-dominated elastic behavior. This resembles the findings of the classic Evans and Rawicz micropipette aspiration experiment in giant unilamellar vesicles (GUVs) [E. Evans and W. Rawicz, Phys, Rev. Lett. 64, 2094 (1990)]. However, in GUVs the crossover between the two elasticity regimes occurs at a small positive surface tension, while in smaller membranes it takes place at a moderate negative tension. Another interesting observation concerning the response of a small membrane to negative surface tension is related to the relationship between the mechanical and fluctuation tensions, which are equal to each other for non-negative values. When the tension decreases to negative values, the fluctuation tension γ drops somewhat faster than the mechanical tension τ in the small negative tension regime, before it saturates (and becomes larger than τ) for large negative tensions. The bending modulus exhibits an "opposite" trend. It remains almost unchanged in the stretching-dominated elastic regime, and decreases in the bending-dominated regime. Both the amplitudes of the thermal height undulations and the projected area variations diverge at the onset of mechanical instability.

  6. Eterotopia, tecnica di straniamento: luoghi e figure del soggetto in Foucault e Lévi-strauss

    Directory of Open Access Journals (Sweden)

    Camilla Pagani

    2013-05-01

    Full Text Available Questa ricerca, attraverso alcune letture incrociate di Michel Foucault e di Claude Lévi-Strauss, mette in luce l’attualità di due grandi pensatori che pongono al centro delle loro teorie il tema della distanza, dell’altro da sé e del ritorno a sé per comprendere il ruolo del soggetto nella civiltà occidentale. Al di là delle rilevanti differenze che li contraddistinguono, Foucault e Lévi-Strauss percorrono due cammini teorici volti a decostruire il rapporto tra verità e soggetto nella civiltà occidentale adottando una prospettiva della distanza e dell’allontanamento da sé, quali tecniche per comprendere se stessi. Da una parte il concetto foucaultiano di eterotopia, in quanto «spazio assolutamente altro», permette di comprendere i meccanismi attraverso i quali ci si proietta in un altrove senza luogo preciso per localizzare se stessi. Il campo dell’etnologia, sarà dunque letto attraverso la lente foucaultiana, quale «eterotopologia», o scienza eterotopica, per eccellenza. Dall’altra, questo concetto sarà analizzato alla luce di quello che Lévi-Strauss ha definito nel saggio sui Tre umanesimi una «tecnica dello straniamento», ovvero un metodo che permette di pensare se stessi grazie al confronto con l’Altro, con culture di altri luoghi ed altri tempi: per conoscere il soggetto che è l’uomo, non si può non prescindere da un lavoro di continui raffronti e paragoni tra diverse società nel tempo e nello spazio.

  7. Update on normal tension glaucoma

    Directory of Open Access Journals (Sweden)

    Jyotiranjan Mallick

    2016-01-01

    Full Text Available Normal tension glaucoma (NTG is labelled when typical glaucomatous disc changes, visual field defects and open anterior chamber angles are associated with intraocular pressure (IOP constantly below 21 mmHg. Chronic low vascular perfusion, Raynaud's phenomenon, migraine, nocturnal systemic hypotension and over-treated systemic hypertension are the main causes of normal tension glaucoma. Goldmann applanation tonometry, gonioscopy, slit lamp biomicroscopy, optical coherence tomography and visual field analysis are the main tools of investigation for the diagnosis of NTG. Management follows the same principles of treatment for other chronic glaucomas: To reduce IOP by a substantial amount, sufficient to prevent disabling visual loss. Treatment is generally aimed to lower IOP by 30% from pre-existing levels to 12-14 mmHg. Betaxolol, brimonidine, prostaglandin analogues, trabeculectomy (in refractory cases, systemic calcium channel blockers (such as nifedipine and 24-hour monitoring of blood pressure are considered in the management of NTG. The present review summarises risk factors, causes, pathogenesis, diagnosis and management of NTG.

  8. Surface tension and dynamics of fingering patterns

    OpenAIRE

    Magdaleno Escar, Francesc Xavier; Casademunt i Viader, Jaume

    1998-01-01

    We study the minimal class of exact solutions of the Saffman-Taylor problem with zero surface tension, which contains the physical fixed points of the regularized (non-zero surface tension) problem. New fixed points are found and the basin of attraction of the Saffman-Taylor finger is determined within that class. Specific features of the physics of finger competition are identified and quantitatively defined, which are absent in the zero surface tension case. This has dramatic consequences f...

  9. The Surface Tension of Pure Liquid Compounds,

    Science.gov (United States)

    The surface tension tables presented herein are the result of a literature survey, evaluation, and compilation of data of some 2200 pure liquid... surface tension values to establish the regression curves and their equations. The constants of the equations (slope and intercept), together with the...standard deviations are given for each compound. The selection factors establishing criteria of quality of surface tension data are discussed. These

  10. Coupling of marine riser and tensioner system

    OpenAIRE

    Olssøn, Tor Trainer

    2011-01-01

    A coupled model of a marine riser and a tensioner system is built. The riser is modeled using the multi-body dynamics program MSC Adams, and the tensioner system using the powerful controls and systems simulation tool, MSC Easy5. The hydrodynamic forces on the marine riser are calculated according to linear wave theory, and implemented in the model using a custom made subroutine. The riser is modeled using flexible beam elements according to Timoshenko beam theory. The tensioner system is...

  11. Actin filaments as tension sensors.

    Science.gov (United States)

    Galkin, Vitold E; Orlova, Albina; Egelman, Edward H

    2012-02-07

    The field of mechanobiology has witnessed an explosive growth over the past several years as interest has greatly increased in understanding how mechanical forces are transduced by cells and how cells migrate, adhere and generate traction. Actin, a highly abundant and anomalously conserved protein, plays a large role in forming the dynamic cytoskeleton that is so essential for cell form, motility and mechanosensitivity. While the actin filament (F-actin) has been viewed as dynamic in terms of polymerization and depolymerization, new results suggest that F-actin itself may function as a highly dynamic tension sensor. This property may help explain the unusual conservation of actin's sequence, as well as shed further light on actin's essential role in structures from sarcomeres to stress fibers. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Sacral-neuromodulation CT-guided; Nuova tecnica di centraggio TC-assistista nella neuromodulazione sacrale

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, Lamberto; Ricci, Stefano [INRCA, Ancona (Italy). Dipartimento di radiologia e medicina nucleare; Pelliccioni, Giuseppe; Scarpino, Osvaldo [INRCA, Ancona (Italy). Unita' operativa di radiologia; Ghiselli, Roberto; Saba, Vittorio [INRCA, Ancona (Italy). Dipartimento di chirurgia

    2005-04-01

    in una stimolazione temporanea attraverso un elettrocatetere posizionato mediante puntura percutanea nella radice sacrale S3 al fine di testare l'integrite anatomica della radice. Il test PNE ? eseguito normalmente sotto guida fluoroscopica. Questa tecnica pue se valida, pui presentare alcuni inconvenienti, quali l'esposizione radiogena per gli operatori, la mancata visualizzazione del foro sacrale per gli artefatti da gas colico e l'impossibilite di valutare correttamente la profondita e la sede d'impianto dell'elettrodo-stimolatore. Scopo del lavoro e stato quello di perimentare una tecnica alternativa utilizzando la guida TC al fine di valutarne vantaggi e un possibile uso routinario. Materiale e metodi: Abbiamo testato con PNE test in guida TC 30 pazienti (16 maschi e 14 femmine) affetti da gravi disfunzioni pelviche refrattari agli usuali regimi terapeutici. Ventisette pazienti presentavano una relativa integrit? anatomica del bacino e del sacro, 3 pazienti invece erano portatori du anomalie morfologiche dei forami sacrali. Si e proceduto all'identificazione dei fori sacrali mediante scansioni TC volumetriche, a paziente prono, utilizzando un apparecchio TC spirale dotato di una seconda consolle per le ricostruzioni tridimensionali. Identificata la sede dei forami S3, viene preparato il campo sterile e s'introduce l'ago verificandone la corretta posizione con una scansione TC di controllo. Si passa successivamente all'introduzionedell'elettrodo dopo avere verificato la corretta risposta contrattile muscolare e la precisa posizione con una ulteriore scansione TC. Risultati: Trenta pazienti sono stati sottoposti a PNE test sotto guida TC, per un totale di 38 centraggi. In 8 pazienti e stata eseguito il PNE test su entrambi i fori S3. Il forame sacrale e stato centrato al primo tentativo in 36/38 casi. In due casi sono stati necessari pi? tentativi per centrare correttamente il forame. In 4/30 pazienti e stato

  13. Tension Pneumothorax following an Accidental Kerosene Poisoning ...

    African Journals Online (AJOL)

    Tension pneumothorax is a rare complication following an accidental kerosene poisoning. In such situation, a bed-side needle thoracocentesis is performed because of its potential of becoming fatal; hence its clinical importance. A case of 15 month old boy with tension pneumothorax following accidental kerosene ...

  14. Surface Tension Measurements of Chemically Modified Oleochemical

    Science.gov (United States)

    Surface tension is an important physical property of a substance, which plays a part in a variety of physical phenomenon relevant to many industrial processes. For example, the efficiency of the atomization of a fuel has been shown to be effected dramatically by surface tension and viscosity. Beca...

  15. Effect of Gravity on Surface Tension

    Science.gov (United States)

    Weislogel, M. M.; Azzam, M. O. J.; Mann, J. A.

    1998-01-01

    Spectroscopic measurements of liquid-vapor interfaces are made in +/- 1-g environments to note the effect of gravity on surface tension. A slight increase is detected at -1-g0, but is arguably within the uncertainty of the measurement technique. An increased dependence of surface tension on the orientation and magnitude of the gravitational vector is anticipated as the critical point is approached.

  16. A TOGgle for Tension at Kinetochores.

    Science.gov (United States)

    Cheerambathur, Dhanya K; Prevo, Bram; Desai, Arshad

    2016-06-02

    Differential stability of kinetochore-microtubule attachments at low versus high tension is critical for accurate chromosome segregation. Miller et al. find that a TOG domain microtubule-binding protein imparts intrinsic tension selectivity to kinetochore-microtubule attachments. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Intraoperative Development of Tension Pneumocephalus in a ...

    African Journals Online (AJOL)

    A review of studies discussing the role of N2O in tension pneumocephalus has also been included. The article heightens awareness among. CASE. REPORT. Intraoperative Development of Tension Pneumocephalus in a. Patient Undergoing Repair of a Cranial‑dural Defect Under. Nitrous Oxide Anesthesia. Mansher Singh ...

  18. Tension and robustness in multitasking cellular networks.

    Directory of Open Access Journals (Sweden)

    Jeffrey V Wong

    Full Text Available Cellular networks multitask by exhibiting distinct, context-dependent dynamics. However, network states (parameters that generate a particular dynamic are often sub-optimal for others, defining a source of "tension" between them. Though multitasking is pervasive, it is not clear where tension arises, what consequences it has, and how it is resolved. We developed a generic computational framework to examine the source and consequences of tension between pairs of dynamics exhibited by the well-studied RB-E2F switch regulating cell cycle entry. We found that tension arose from task-dependent shifts in parameters associated with network modules. Although parameter sets common to distinct dynamics did exist, tension reduced both their accessibility and resilience to perturbation, indicating a trade-off between "one-size-fits-all" solutions and robustness. With high tension, robustness can be preserved by dynamic shifting of modules, enabling the network to toggle between tasks, and by increasing network complexity, in this case by gene duplication. We propose that tension is a general constraint on the architecture and operation of multitasking biological networks. To this end, our work provides a framework to quantify the extent of tension between any network dynamics and how it affects network robustness. Such analysis would suggest new ways to interfere with network elements to elucidate the design principles of cellular networks.

  19. Surface tension measurements with a smartphone

    Science.gov (United States)

    Goy, Nicolas-Alexandre; Denis, Zakari; Lavaud, Maxime; Grolleau, Adrian; Dufour, Nicolas; Deblais, Antoine; Delabre, Ulysse

    2017-11-01

    Smartphones are increasingly used in higher education and at university in mechanics, acoustics, and even thermodynamics as they offer a unique way to do simple science experiments. In this article, we show how smartphones can be used in fluid mechanics to measure surface tension of various liquids, which could help students understand the concept of surface tension through simple experiments.

  20. Initial tension loss in cerclage cables.

    Science.gov (United States)

    Ménard, Jérémie; Émard, Maxime; Canet, Fanny; Brailovski, Vladimir; Petit, Yvan; Laflamme, George Y

    2013-10-01

    Cerclage cables, frequently used in the management of fractures and osteotomies, are associated with a high failure rate and significant loosening during surgery. This study compared the capacity to maintain tension of different types of orthopaedic cable systems. Multifilament Cobalt-Chrome (CoCr) cables with four different crimp/clamp devices (DePuy, Stryker, Zimmer and Smith&Nephew) and one non-metallic Nylon (Ny) cable from Kinamed were instrumented with a load cell to measure tension during insertion. Significant tension loss was observed with crimping for all cables (Ptensioner led to an additional unexpected tension loss (CoCr-DePuy: 18%, CoCr-Stryker: 29%, CoCr-Smith&Nephew: 33%, Ny: 46%, and CoCr-Zimmer: 52%). The simple CoCr (DePuy) cable system outperformed the more sophisticated locking devices due to its significantly better ability to prevent tension loss. Copyright © 2013 Elsevier Inc. All rights reserved.

  1. Tension permeameter for deep borehole characterization

    Energy Technology Data Exchange (ETDEWEB)

    Sisson, J.B.; Honeycutt, T.K. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1994-12-31

    The permeability of geologic materials is an important variable for estimating the rate of transport of contaminants from waste sites. To date, permeability has been estimated in the laboratory from measurements made on small cores, under hydrologic conditions far removed from those of the field. Available field instruments cannot estimate permeabilities at depth under ambient conditions. The authors have constructed a borehole tension permeameter that is capable of operating at near field conditions and at depths of more than 30 m. The tension permeameter consists of a syringe pump, lightweight packer, semipermeable membrane, and pressure transducer, all controlled by a programmable logic controller. Water is metered at a fixed rate through the membrane while monitoring tension. The permeability is estimated from the steady pumping rate for the membrane geometry used at the measured water tension. The permeameter was used to estimate the permeability of Pancheri sandy loam at tensions of 0 to 150 cm.

  2. Foreseeing techniques and control of emissions in thermal power plants. Workshop Latin American. [Selected Papers]; Control y tecnicas de prevision de las emisiones de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Saldana, R.; Morales, F.; Urrutia, M. [eds.] [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This document contains the conference proceedings of the Latin-American Workshop ``Control and Prevision Techniques of Emissions in Power Plants`` carried out in Cuernavaca, Mexico on June 1996, with the participation of representatives of Argentina, Chile, Guatemala, Colombia, Ecuador, Mexico, Nicaragua, Panama and Venezuela, as well as specialists from the European Union. The core issue analyzed in this workshop was the control and the evaluation techniques of polluting emissions in Power Plants [Espanol] Este documento contiene las memorias de conferencia del Taller Latinoamericano ``Control y tecnicas de prevision de las emisiones de centrales termoelectricas`` que se llevo a cabo en Cuernavaca, Mexico en junio de 1996. Participaron representantes de Argentina, Chile, Guatemala, Colombia, Ecuador, Mexico, Nicaragua, Panama y Venezuela, asi como especialistas de la Union Europea. El tema central tratado en este taller fue el control y tecnicas de evaluacion de las emisiones contaminantes en centrales termoelectricas

  3. Analysis methodology for economic technical feasibility studies in offshore electrical generation systems; Metodologia de analisis para estudios de factibilidad tecnica economica en sistemas de generacion electrica costa fuera

    Energy Technology Data Exchange (ETDEWEB)

    Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-07-01

    An analysis methodology followed in the development of technique-economic feasibility studies of systems of electrical generation in offshore electrical installations is presented, including the obtaining of the curves of the turbine and generator performance, the technical considerations for the formulation of the operation scenes and the calculations of the economic evaluation of a real scenario. [Spanish] Se muestra una metodologia de analisis seguida en el desarrollo de estudios de factibilidad tecnica-economica de sistemas de generacion electrica en instalaciones electricas costa fuera, incluyendo la obtencion de las curvas de comportamiento de la turbina y el generador, las consideraciones tecnicas para la formulacion de los escenarios de operacion y los calculos de la evaluacion economica de un escenario real.

  4. Determinacion del N y P en abonos organicos mediante la tecnica del elemento faltante y un bioensayo microbiano

    Directory of Open Access Journals (Sweden)

    Eduardo Salas

    2001-01-01

    Full Text Available Mediante la tecnica del elemento faltante en ferinvernadero y el uso de un bioensayo microbiano se determin6 la disponibilidad de N y P en 6 sus- greenhoutratos: suelo s6lo 0 en mezcla 9: 1 con diversos abo- nos organicos, a saber: pollinaza (CM, compost (C, bocashi (B, vermicompost (V 0 broza de ca- determife (Br. En ambos bioensayos y para cada sustrato se realiz6 un experimento factorial 2x2 (fertiliza- ci6n con P y N; las combinaciones resultantes fue- ron: +P, +N, +P+N y -P-N (testigo. En el bioensa- yo microbiano se utiliz6 un diseno de bloques al azar con 6 repeticiones y se midi6 el crecimiento microde la biomasa microbiana nativa (BM 2 dias des- pues de aplicar el tratamiento e incubar con gluco- sa. En la prueba de invernadero se utiliz6 un dise- no completamente al azar con 4 repeticiones, se utiliz6 sorgo (Sorghum vulgare como planta indi- cadora. Se midi6 el peso seco de la parte aerea de lasplantas a los 34 dias de la siembra (PS y el con- tenido foliar de nutrimentos. Ambos bioensayos in- sordicaron respuesta del suelo a la aplicaci6n de P y N. La mezcla del suelo con un 10% de CM, CoB mostraron los valores mas altos de BM y PS. La mezcla suelo:CM no respondi6 a ningun tratamien- to qufmico, mientras que en mezcla con el C 0 el B respondi6 a la aplicaci6n de N pero no al P. Con el Vola Br se obtuvo las menores respuestas de las variables y hubo respuesta ala adici6n de P y N. La tecnica del elemento faltante de invernadero

  5. Electrochemical techniques application in corrosion problems of fossil power plants; Aplicacion de tecnicas electroquimicas en problemas de corrosion en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Cano Castillo, Ulises; Garcia Ochoa, Esteban Miguel; Martinez Villafane, Alberto; Mariaca Rodriguez, Liboria; Malo Tamayo, Jose Maria; Uruchurtu Chavarin, Jorge [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    Some aspects of the electrochemical techniques employed to evaluate the corrosion at low temperature in fossil power plants are commented, as well as the results obtained with the application of them in three power plants of this type. [Espanol] Se comentan algunos aspectos de tecnicas electroquimicas utilizadas para evaluar la corrosion en baja temperatura en centrales termoelectricas, asi como los resultados de la aplicacion de las mismas en tres centrales de este tipo.

  6. Reduction in wire tension caused by wire clamping and wire tensioner removal: an experimental Ilizarov frame study.

    Science.gov (United States)

    La Russa, Valentina; Skallerud, Bjørn; Klaksvik, Jomar; Foss, Olav A

    2011-03-01

    The stability of an external ring fixator mainly depends on wire tension. Wire fixators should maintain the tension during both wire clamping to the ring and removal of the tensioner device. In the present study the loss in wire tension related to fixator clamping and wire tensioner removal using three different wire fixator designs was studied. The fixators were based on two different cannulated bolts and a washer. Effects from two different pretension levels in combination with three different bolt torque levels upon loss in wire tension were described. Emitted wire vibration frequency was used to assess the corresponding wire tension. Wire tension was determined after each wire fixator tightening and after the removal of the wire tensioner. Increased bolt torque led to a small decrease in tension for both pretension levels. A considerable higher tension loss was measured when removing the wire tensioner. In all cases, the combination of a new cannulated bolt and a washer maintained the highest tension.

  7. Dynamical Modeling of Surface Tension

    Science.gov (United States)

    Brackbill, Jeremiah U.; Kothe, Douglas B.

    1996-01-01

    In a recent review it is said that free-surface flows 'represent some of the difficult remaining challenges in computational fluid dynamics'. There has been progress with the development of new approaches to treating interfaces, such as the level-set method and the improvement of older methods such as the VOF method. A common theme of many of the new developments has been the regularization of discontinuities at the interface. One example of this approach is the continuum surface force (CSF) formulation for surface tension, which replaces the surface stress given by Laplace's equation by an equivalent volume force. Here, we describe how CSF formulation might be made more useful. Specifically, we consider a derivation of the CSF equations from a minimization of surface energy as outlined by Jacqmin (1996). This reformulation suggests that if one eliminates the computation of curvature in terms of a unit normal vector, parasitic currents may be eliminated. For this reformulation to work, it is necessary that transition region thickness be controlled. Various means for this, in addition to the one discussed by Jacqmin (1996), are discussed.

  8. Tension and Robustness in Multitasking Cellular Networks

    Science.gov (United States)

    Wong, Jeffrey V.; Li, Bochong; You, Lingchong

    2012-01-01

    Cellular networks multitask by exhibiting distinct, context-dependent dynamics. However, network states (parameters) that generate a particular dynamic are often sub-optimal for others, defining a source of “tension” between them. Though multitasking is pervasive, it is not clear where tension arises, what consequences it has, and how it is resolved. We developed a generic computational framework to examine the source and consequences of tension between pairs of dynamics exhibited by the well-studied RB-E2F switch regulating cell cycle entry. We found that tension arose from task-dependent shifts in parameters associated with network modules. Although parameter sets common to distinct dynamics did exist, tension reduced both their accessibility and resilience to perturbation, indicating a trade-off between “one-size-fits-all” solutions and robustness. With high tension, robustness can be preserved by dynamic shifting of modules, enabling the network to toggle between tasks, and by increasing network complexity, in this case by gene duplication. We propose that tension is a general constraint on the architecture and operation of multitasking biological networks. To this end, our work provides a framework to quantify the extent of tension between any network dynamics and how it affects network robustness. Such analysis would suggest new ways to interfere with network elements to elucidate the design principles of cellular networks. PMID:22577355

  9. Gastrothorax or tension pneumothorax: A diagnostic dilemma

    Directory of Open Access Journals (Sweden)

    Singh Sarvesh

    2011-01-01

    Full Text Available Gastrothorax, a rare complication following thoracoabdominal aortic aneurysm repair, is reported. The clinical features of a gastrothorax and tension pneumothorax are similar and thus, a gastrothorax can masquerade as a tension pneumothorax. The diagnosis is made by a high level of clinical suspicion, chest X-ray shows a distended stomach with air fluid levels and a computerised tomography is useful in assessing the diaphragm and establishing the positions of the various intra-abdominal organs. Also, the risk of an intercostal drainage tube placement and the role of nasogastric tube in avoiding the development of a tension gastrothorax is highlighted.

  10. Surface tension profiles in vertical soap films

    Science.gov (United States)

    Adami, N.; Caps, H.

    2015-01-01

    Surface tension profiles in vertical soap films are experimentally investigated. Measurements are performed by introducing deformable elastic objets in the films. The shape adopted by those objects once set in the film is related to the surface tension value at a given vertical position by numerically solving the adapted elasticity equations. We show that the observed dependency of the surface tension versus the vertical position is predicted by simple modeling that takes into account the mechanical equilibrium of the films coupled to previous thickness measurements.

  11. The Dynamic Surface Tension of Water.

    Science.gov (United States)

    Hauner, Ines M; Deblais, Antoine; Beattie, James K; Kellay, Hamid; Bonn, Daniel

    2017-04-06

    The surface tension of water is an important parameter for many biological or industrial processes, and roughly a factor of 3 higher than that of nonpolar liquids such as oils, which is usually attributed to hydrogen bonding and dipolar interactions. Here we show by studying the formation of water drops that the surface tension of a freshly created water surface is even higher (∼90 mN m -1 ) than under equilibrium conditions (∼72 mN m -1 ) with a relaxation process occurring on a long time scale (∼1 ms). Dynamic adsorption effects of protons or hydroxides may be at the origin of this dynamic surface tension. However, changing the pH does not significantly change the dynamic surface tension. It also seems unlikely that hydrogen bonding or dipole orientation effects play any role at the relatively long time scale probed in the experiments.

  12. The Dynamic Surface Tension of Water

    Science.gov (United States)

    2017-01-01

    The surface tension of water is an important parameter for many biological or industrial processes, and roughly a factor of 3 higher than that of nonpolar liquids such as oils, which is usually attributed to hydrogen bonding and dipolar interactions. Here we show by studying the formation of water drops that the surface tension of a freshly created water surface is even higher (∼90 mN m–1) than under equilibrium conditions (∼72 mN m–1) with a relaxation process occurring on a long time scale (∼1 ms). Dynamic adsorption effects of protons or hydroxides may be at the origin of this dynamic surface tension. However, changing the pH does not significantly change the dynamic surface tension. It also seems unlikely that hydrogen bonding or dipole orientation effects play any role at the relatively long time scale probed in the experiments. PMID:28301160

  13. Modelling Tension Stiffening in Reinforced Concrete Structures

    DEFF Research Database (Denmark)

    Christiansen, Morten Bo; Nielsen, Mogens Peter

    1997-01-01

    Part I of the present thesis deals with crack formation in reinforced concrete and the phenomenon of tension stiffening in concrete tension rods reinforced with deformed bars.Two physical models are presented for uniaxial tension, and they are modified for application on beams subjected to pure...... predicted by the models are compared with experimental data from tests on tension rods as well as flexural beams.In the light of the simple assumptions made and the random nature of cracking, the accordance between the models and the test data is quite good.Part II of the present thesis deals...... of the simple assumptions, quite good accordance is found.Part III of the thesis deals with the deformations of a beam symmetrically loaded by two concentrated forces. In the shear-flexure beam model it is assumed that the load is carried by means of a stringer system and a diagonal stress field in the shear...

  14. Transcutaneous oxygen tension in imminent foot gangrene

    DEFF Research Database (Denmark)

    Tønnesen, K H

    1978-01-01

    Transcutaneous oxygen tension at 44 degree C and maximal isotope clearance (90m Tc-pretechnetate + histramine) just proximal to the 1st toe and systolic toe blood pressure (strain gauge) were studied on a tilt table in patients with various degrees of obstructive arteriosclerotic disease. In legs...... with moderate obstruction, the oxygen tension reached zero at a toe systolic blood pressure of 5--10 mmHg (tilt toe up) and reached arterial oxygen tension at about 50 to 70 mmHg (tilt toe down). In legs withsevere arterial obstruction and ischaemic rest pain, oxygen tension rose from zero not before systolic...... toe blood pressure reached 20--50 mmHg. Significant isotope clearance was seen at pressures below the limits just mentioned for both types of patients. This phenomenon here seen of a perfusion without oxygen supply is explained by a gas leak (rendered significant because of the slow flow rate) from...

  15. Tension Hydrothorax Related to Disseminated Endometriosis

    Directory of Open Access Journals (Sweden)

    AnnaKate Deal, MD

    2016-01-01

    Full Text Available We present the case of a 34-year-old woman presenting to the emergency department (ED with dyspnea, cough, and fever. She was found to have a tension hydrothorax and was treated with ultrasound-guided thoracentesis in the ED. Subsequent inpatient evaluation showed the patient had disseminated endometriosis. Tension hydrothorax has not been previously described in the literature as a complication of this disease.

  16. Leadership matters: Tensions in evaluating leadership development

    OpenAIRE

    Jarvis, C.; Gulati, A.; McCririck, V.; Simpson, P.

    2013-01-01

    The Problem and Solution: This paper explores some of the tensions that required careful management in the design and delivery of a leadership development program. This discussion draws particularly upon a formal evaluation of two cohorts, each comprising approximately 20 senior managers working in adult social care. Complexity theory, notably Complex Responsive Processes of Relating, is used to make visible, explore and articulate the need to hold in tension apparently contradictory forces a...

  17. The accuracy of fine wire tensioners: a comparison of five tensioners used in hybrid and ring external fixation.

    Science.gov (United States)

    Roberts, Craig S; Antoci, Valentin; Antoci, Valentin; Voor, Michael J

    2004-03-01

    To compare the accuracy of 5 commonly available fine wire tensioners used in hybrid and ring external fixation. A laboratory investigation. The testing of 5 commonly available tensioners was performed with a servohydraulic test frame (MTS Bionix 858, Minneapolis, MN). The real wire tension data of each tensioner provided by the MTS were compared with corresponding nominal values. The percent error for each tensioner was calculated. Clinical ease of usage of the wire tensioners was also evaluated. The EBI tensioner was the most accurate (-0.17% to 0.09% error). The Smith and Nephew tensioner had a -13.97% to -8.61% error, the How medica tensioner a -12.48% to -10.86% error, and the Synthes tensioner a -0.2% to 24.28% error. The DePuyACE tensioner was the least accurate, with errors ranging from -36.76% to -30.92%. The Howmedica tensioner was the easiest to use, followed by the Smith and Nephew tensioner, the DePuyACE tensioner, the Synthes tensioner, and the EBI tensioner. Most commonly available tensioners tend to undertension. Future efforts should focus on the development of wire tensioners that combine accuracy and ease of usage.

  18. Oxygen tension level and human viral infections

    Energy Technology Data Exchange (ETDEWEB)

    Morinet, Frédéric, E-mail: frederic.morinet@sls.aphp.fr [Centre des Innovations Thérapeutiques en Oncologie et Hématologie (CITOH), CHU Saint-Louis, Paris (France); Université Denis Diderot, Sorbonne Paris Cité Paris, Paris (France); Casetti, Luana [Institut Cochin INSERM U1016, Paris (France); François, Jean-Hugues; Capron, Claude [Institut Cochin INSERM U1016, Paris (France); Laboratoire d' Hématologie, Hôpital Ambroise Paré, Boulogne (France); Université de Versailles Saint-Quentin en Yvelynes, Versailles (France); Pillet, Sylvie [Laboratoire de Bactériologie-Virologie-Hygiène, CHU de Saint-Etienne, Saint-Etienne (France); Université de Lyon et Université de Saint-Etienne, Jean Monnet, GIMAP EA3064, F-42023 Saint-Etienne, Lyon (France)

    2013-09-15

    The role of oxygen tension level is a well-known phenomenon that has been studied in oncology and radiotherapy since about 60 years. Oxygen tension may inhibit or stimulate propagation of viruses in vitro as well as in vivo. In turn modulating oxygen metabolism may constitute a novel approach to treat viral infections as an adjuvant therapy. The major transcription factor which regulates oxygen tension level is hypoxia-inducible factor-1 alpha (HIF-1α). Down-regulating the expression of HIF-1α is a possible method in the treatment of chronic viral infection such as human immunodeficiency virus infection, chronic hepatitis B and C viral infections and Kaposi sarcoma in addition to classic chemotherapy. The aim of this review is to supply an updating concerning the influence of oxygen tension level in human viral infections and to evoke possible new therapeutic strategies regarding this environmental condition. - Highlights: • Oxygen tension level regulates viral replication in vitro and possibly in vivo. • Hypoxia-inducible factor 1 (HIF-1α) is the principal factor involved in Oxygen tension level. • HIF-1α upregulates gene expression for example of HIV, JC and Kaposi sarcoma viruses. • In addition to classical chemotherapy inhibition of HIF-1α may constitute a new track to treat human viral infections.

  19. Evaluation of the accuracy of a veterinary dynamometric wire tensioner.

    Science.gov (United States)

    Gauthier, C M; McGilvray, K; Myrick, S; Duerr, F; Palmer, R

    2015-01-01

    The purpose of this study was to determine the accuracy of a commonly used veterinary wire tensioner. Wire tension was measured using a load cell after each of five tensioners were used to tension each of six wires to the 66, 84, and 118 mm ring settings in an adjustable custom testing fixture. Each tensioner then experienced simulated aging and testing was repeated. Percentage error was calculated for each ring size, before and after tensioner aging. Measured tension values were compared to manufacturer reported tension values for each ring size using a one-sample two-way t-test; p tension values were significantly lower for 66 mm and 84 mm rings and significantly higher for 118 mm rings, before and after simulated aging. Mean wire tension values did not significantly differ between individual wire tensioners. The tensioners tested achieved significantly different wire tension values than those reported by the manufacturer. This discrepancy could lead to under-tensioning and allowing excessive movement at a fracture site or over-tensioning, leading to wire breakage. We recommend tensioning wires at least to the recommended line on the device for 66 mm and 84 mm rings and at most to the recommended line for 118 mm rings. Further studies are needed to evaluate other veterinary wire tensioners and to develop a calibration method for these devices in practice.

  20. The effect of vesicle shape, line tension, and lateral tension on membrane-binding proteins

    Science.gov (United States)

    Hutchison, Jaime B.

    Model membranes allow for the exploration of complex biological phenomena with simple, controllable components. In this thesis we employ model membranes to determine the effect of vesicle properties such as line tension, lateral tension, and shape on membrane-binding proteins. We find that line tension at the boundary between domains in a phase separated vesicle can accumulate model membrane-binding proteins (green fluorescent protein with a histidine tag), and that those proteins can, in turn, alter vesicle shape. These results suggest that domains in biological membranes may enhance the local concentration of membrane-bound proteins and thus alter protein function. We also explore how membrane mechanical and chemical properties alter the function of the N-BAR domain of amphiphysin, a membrane-binding protein implicated in endocytosis. We find that negatively charged lipids are necessary for N-BAR binding to membranes at detectable levels, and that, at least for some lipid species, binding may be cooperative. Measurements of N-BAR binding as a function of vesicle tension reveal that modest membrane tension of around 2 mN/m, corresponding to a strain of around 1%, strongly increases N-BAR binding. We attribute this increase in binding with tension to the insertion of N-BAR's N-terminal amphipathic helix into the membrane which increases the membrane area. We propose that N-BAR, which was previously described as being able to sense membrane curvature, may be sensing strain instead. Measurements of membrane deformation by N-BAR as a function of membrane tension reveal that tension can hinder membrane deformation. Thus, tension may favor N-BAR binding yet suppress membrane deformation/tubulation, which requires work against tension. These results suggest that membrane tension, a parameter that is often not controlled in model membranes but is tightly controlled in biological cells, may be important in regulating protein binding and assembly and, hence, protein

  1. Oxygen tension affects lubricin expression in chondrocytes.

    Science.gov (United States)

    Hatta, Taku; Kishimoto, Koshi N; Okuno, Hiroshi; Itoi, Eiji

    2014-10-01

    We assessed the effects of oxygen tension on lubricin expression in bovine chondrocytes and cartilage explants and a role for hypoxia-inducible transcription factor (HIF)-1α in regulating lubricin expression was investigated using a murine chondroprogenitor cell line, ATDC5, and bovine chondrocytes isolated from superficial and middle/deep zones of femoral cartilage. ATDC5 cells and bovine chondrocytes were cultured in micromass under different oxygen tensions (21%, 5%, and 1%). ATDC5 cells and middle/deep zone chondrocytes that initially had low lubricin expression levels were also cultured with or without transforming growth factor (TGF)-β1. Quantitative reverse transcription (RT)-PCR was used to determine lubricin and chondrogenic marker gene mRNA levels and immunohistochemistry was used to assess lubricin protein expression. Explant cartilage plugs cultured under different oxygen tensions were also subjected to immunohistological analysis for lubricin. HIF-1α gene silencing was achieved by electroporatic transfer into ATDC5 cells. A low oxygen tension reduced lubricin gene expression levels in bovine superficial chondrocytes, TGF-β1-treated middle/deep zone chondrocytes, and TGF-β1-treated ATDC5 cells. Lubricin expression in explant cartilage was also suppressed under hypoxia. HIF-1α gene silencing in ATDC5 cells attenuated the lubricin expression response to the oxygen tension. These results corroborate with previous studies that the oxygen tension regulates lubricin gene expression and suggest that HIF-1α plays an important role in this regulation. The normal distribution of lubricin in articular cartilage may be due to the hypoxic oxygen environment of cartilage as it is an avascular tissue. An oxygen tension gradient may be a key factor for engineering cartilage tissue with a layered morphology.

  2. A novel approach to pipeline tensioner modeling

    Energy Technology Data Exchange (ETDEWEB)

    O' Grady, Robert; Ilie, Daniel; Lane, Michael [MCS Software Division, Galway (Ireland)

    2009-07-01

    As subsea pipeline developments continue to move into deep and ultra-deep water locations, there is an increasing need for the accurate prediction of expected pipeline fatigue life. A significant factor that must be considered as part of this process is the fatigue damage sustained by the pipeline during installation. The magnitude of this installation-related damage is governed by a number of different agents, one of which is the dynamic behavior of the tensioner systems during pipe-laying operations. There are a variety of traditional finite element methods for representing dynamic tensioner behavior. These existing methods, while basic in nature, have been proven to provide adequate forecasts in terms of the dynamic variation in typical installation parameters such as top tension and sagbend/overbend strain. However due to the simplicity of these current approaches, some of them tend to over-estimate the frequency of tensioner pay out/in under dynamic loading. This excessive level of pay out/in motion results in the prediction of additional stress cycles at certain roller beds, which in turn leads to the prediction of unrealistic fatigue damage to the pipeline. This unwarranted fatigue damage then equates to an over-conservative value for the accumulated damage experienced by a pipeline weld during installation, and so leads to a reduction in the estimated fatigue life for the pipeline. This paper describes a novel approach to tensioner modeling which allows for greater control over the velocity of dynamic tensioner pay out/in and so provides a more accurate estimation of fatigue damage experienced by the pipeline during installation. The paper reports on a case study, as outlined in the proceeding section, in which a comparison is made between results from this new tensioner model and from a more conventional approach. The comparison considers typical installation parameters as well as an in-depth look at the predicted fatigue damage for the two methods

  3. Emergency percutaneous needle decompression for tension pneumoperitoneum

    Directory of Open Access Journals (Sweden)

    Körner Markus

    2011-05-01

    Full Text Available Abstract Background Tension pneumoperitoneum as a complication of iatrogenic bowel perforation during endoscopy is a dramatic condition in which intraperitoneal air under pressure causes hemodynamic and ventilatory compromise. Like tension pneumothorax, urgent intervention is required. Immediate surgical decompression though is not always possible due to the limitations of the preclinical management and sometimes to capacity constraints of medical staff and equipment in the clinic. Methods This is a retrospective analysis of cases of pneumoperitoneum and tension pneumoperitoneum due to iatrogenic bowel perforation. All patients admitted to our surgical department between January 2005 and October 2010 were included. Tension pneumoperitoneum was diagnosed in those patients presenting signs of hemodynamic and ventilatory compromise in addition to abdominal distension. Results Between January 2005 and October 2010 eleven patients with iatrogenic bowel perforation were admitted to our surgical department. The mean time between perforation and admission was 36 ± 14 hrs (range 30 min - 130 hrs, between ER admission and begin of the operation 3 hrs and 15 min ± 47 min (range 60 min - 9 hrs. Three out of eleven patients had clinical signs of tension pneumoperitoneum. In those patients emergency percutaneous needle decompression was performed with a 16G venous catheter. This improved significantly the patients' condition (stabilization of vital signs, reducing jugular vein congestion, bridging the time to the start of the operation. Conclusions Hemodynamical and respiratory compromise in addition to abdominal distension shortly after endoscopy are strongly suggestive of tension pneumoperitoneum due to iatrogenic bowel perforation. This is a rare but life threatening condition and it can be managed in a preclinical and clinical setting with emergency percutaneous needle decompression like tension pneumothorax. Emergency percutaneous decompression is no

  4. TBK1 duplication is found in normal tension and not in high tension ...

    Indian Academy of Sciences (India)

    Supplementary data: TBK1 duplication is found in normal tension and not in high tension glaucoma patients of Indian origin. Lalit Kaurani, Mansi Vishal, Jharna Ray, Abhijit Sen, Kunal Ray and Arijit Mukhopadhyay. J. Genet. 95, 459–461. Table 1. Intraocular pressure of NTG and HTG patients. Total. Mean IOP. Mean IOP ...

  5. Constant-amplitude tests on plain concrete in uniaxial tension and tension-compression

    NARCIS (Netherlands)

    Cornelissen, H.A.W.

    1984-01-01

    This research report is the continuation of Stevin Laboratory Report No. 5-81-7 "Fatigue of plain concrete in uniaxial tension and in alternating tension-compression" [1], in which test set-up, loading equipment and preliminary results have been described. The present report deals with the total set

  6. Percutaneous tension band wiring for patellar fractures.

    Science.gov (United States)

    Rathi, Akhilesh; Swamy, M K S; Prasantha, I; Consul, Ashu; Bansal, Abhishek; Bahl, Vibhu

    2012-08-01

    To evaluate outcome of percutaneous tension band wiring for transverse fractures of the patella. 16 men and 7 women aged 27 to 65 (mean, 40) years underwent percutaneous tension band wiring for transverse fractures of the patella with a displacement of >3 mm. Pain, operating time, mobility, functional score, and complications were evaluated. 20 patients underwent successful percutaneous tension band wiring. The remaining 3 patients in whom closed reduction failed underwent open reduction and tension band wiring. The mean operating time was 46 (range, 28-62) minutes. The mean follow-up period was 20 (range, 15-30) months. At the latest follow-up, all patients had regained full extension. The objective score was excellent in 20 patients and good in 3, whereas the subjective score was excellent in 17, good in 5, and fair in one. All patients had radiological union at week 8. One patient had patellofemoral arthritis (secondary to a postoperative articular step). Two patients developed superficial infections, which resolved after antibiotic therapy. Mean thigh muscle wasting was 0.7 (range, 0.4-1) cm. Three patients encountered hardware problems (impingement/irritation of the skin over the knee) necessitating implant removal. Percutaneous tension band wiring is a viable option for transverse fractures of the patella.

  7. Measurement and control techniques for electric equipment development; Tecnicas de medicion y control para el desarrollo de equipos electricos

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    In broad outlines the measuring and control techniques that are used in the electric equipment development in the short circuit laboratories, are described. In this article the utilization criteria of the traditional and modern (analogical and digital) instruments are described as well as the tendency towards the system`s integration for the automation of the measurement and control processes. Also, mention is made of the systems currently being developed at the Instituto de Investigaciones Electricas (IIE) to be applied at the Short Circuit Laboratories of Comision Federal de Electricidad (CFE) and of the IIE. [Espanol] Se describen a grandes rasgos las tecnicas de medicion y control que se emplean para el desarrollo de equipos electricos en los laboratorios de corto circuito. En este articulo se describen los criterios de utilizacion de los instrumentos tradicionales y modernos (analogicos y digitales), asi como la tendencia hacia la integracion de sistemas para la automatizacion de los procesos de medicion y control. Tambien se mencionan los sistemas que actualmente se desarrollan en el Instituto de Investigaciones Electricas (IIE) para aplicarlos en los Laboratorios de Corto Circuito de la Comision Federal de Electricidad (CFE) y del Instituto.

  8. Fatigue in tension perpendicular to the grain

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1999-01-01

    Traditinally fatigue resistance is quantified as number of cycles to failure at a given stress level. A previous study by the authors showed that fatigue in compression parallel to the grain is governed partly by duration of load and partly by an effect of loading, i.e. a combination of a creep...... and on dowel type joints with slotted in steel plates. In series of ten, the small specimens are taken to fatigue failure in uniform tension at square wave shaped load cycles at 0.01 Hz and 0.1 Hz. In order to test the predictive validity of the result from the small tension specimens, fatigue experiments...... mechanism and a mechanism connected to damage introduce in the loading sequences. The purpose of the present study is to disentangle the effect of duration of load from the effect of load oscillation in fatigue in tension perpendicular to the grain. Fatigue experiments are made on small specimens...

  9. Fatigue In Tension Perpendicular to the Grain

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Uhre; Hoffmeyer, Preben

    2004-01-01

    Traditionally fatigue resistance is quantified as number of cycles to failure at a given stress level. A previous study by the authors showed that fatigue in compression parallel to the grain is governed partly by duration of load and partly by an effect of loading, i.e. a combination of a creep...... and on dowel type joints with slotted in steel plates. In series of ten, the small specimens are taken to fatigue failure in uniform tension at square wave shaped load cycles at 0.01 Hz and 0.1 Hz. In arder to test the predictive validity of the result from the small tension specimens, fatigue experiments...... mechanism and a mechanism connected to damage introduced in the loading sequences. The purpose of the present study is to disentangle the effect of duration of load from the effect of load oscillation in fatigue in tension perpendicular to the grain. Fatigue experiments are made on small specimens...

  10. Carbon speciation and surface tension of fog

    Science.gov (United States)

    Capel, P.D.; Gunde, R.; Zurcher, F.; Giger, W.

    1990-01-01

    The speciation of carbon (dissolved/particulate, organic/inorganic) and surface tension of a number of radiation fogs from the urban area of Zurich, Switzerland, were measured. The carbon species were dominated by "dissolved" organic carbon (DOC; i.e., the fraction that passes through a filter), which was typically present at levels of 40-200 mg/L. Less than 10% of the DOC was identified as specific individual organic compounds. Particulate organic carbon (POC) accounted for 26-41% of the mass of the particles, but usually less than 10% of the total organic carbon mass. Inorganic carbon species were relatively minor. The surface tensions of all the measured samples were less than pure water and were correlated with their DOC concentrations. The combination of high DOC and POC and low surface tension suggests a mechanism for the concentration of hydrophobic organic contaminants in the fog droplet, which have been observed by numerous investigators. ?? 1990 American Chemical Society.

  11. Tensions between Teams and Their Leaders

    Directory of Open Access Journals (Sweden)

    J. David Johnson

    2016-10-01

    Full Text Available The intersection of teamwork and leadership results in tensions, dilemmas, and paradoxes for both individuals and for institutions such as simultaneously empowering individuals at the same time it frustrates them when our naive, cultural understanding of leadership centralizes power and values leaders who can impose their will and vision on others. Perhaps the fundamental paradox of teamwork and leadership is that the more leadership is focused on an individual the less likely a team’s potential will be realized. Six specific domains where tensions arise are: at team boundaries; culture; who is in charge, rationality/cognition; diversity; and collaborations. Three approaches - clarifying different levels of analysis, temporal factors, and overarching concepts - to resolving tensions are discussed. New conceptions of leadership and the importance of the larger cultural frame within which they are embedded are needed for the management of technology and innovation.

  12. Surface tension-driven convection phenomena

    Science.gov (United States)

    Mann, J. A., Jr.

    1980-01-01

    The techniques for measuring surface tension-driven flow are reported. In addition to the fairly standard crossed beam LDV method, methods using ripplon scattering which do not require seeding of the fluid were developed. These methods can be used to determine thermophysical properties of the surface, such as surface tension, viscosity, and local temperature. This technique was utilized to observe the change in surface tension associated with the nematic to isotropic phase transition of para-azoxydianisole at 134 C. The ripplon scattering methods become difficult for surface velocities below 1 mm/sec because of the overlapping spectra. Careful analysis procedures could extend this to smaller flows, but the more conventional LDV techniques with seeded flows are the method of choice for slow flows.

  13. Ion nitriding post-oxidation as an alternative technique to electrolytic chromium; Nitruracion post-oxidacion ionica como tecnica alternativa al cromado electrolitico

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Guillen, J. C.; Granda-Gutierrez, E.E.; Campa-Castilla, A.; Perez-Aguilar, S.I.; Garza-Gomez, A.; Candelas-Ramirez, J.; Mendez-Mendez, R. [COMIMSA. Corporacion Mexicana de Investigacion en Materiales S.A. de C.V., Saltillo, Coahuila (Mexico)]. E-mail: jcarlos@comimsa.com

    2010-11-15

    The effect of temperature and processing time during post-oxidation on hardness and corrosion resistance of AISI 1045 samples treated through nitriding and post-oxidation in a pulsed plasma discharge is evaluated in this paper. Also, a comparative analysis of the mechanical properties obtained with the dual nitriding - post oxidation process versus those properties of typical hard chrome coatings was performed with an aim to propose an alternative technique to the processes of galvanic coatings. The latter revealed that the process of ion nitriding and post-oxidation provides similar properties in hardness and improves the corrosion resistance compared to the hard chrome case. It is conclude that the technique of ion nitriding and post-oxidation is a non environmental harmful technology with strong potential to replace highly polluting electroplating techniques for application of hard chrome coatings. [Spanish] En el presente trabajo se evalua el efecto del tiempo y la temperatura de post-oxidacion sobre las propiedades de dureza y resistencia a la corrosion de muestras de acero AISI 1045 sometido al proceso de nitruracion post-oxidacion ionica en plasmas pulsados. Asi mismo, con el objetivo de fundamentar la propuesta de utilizacion de la nitruracion post-oxidacion ionica como una tecnica alternativa a los procesos galvanicos para aplicacion de recubrimientos de cromo duro, se realizo un analisis comparativo de propiedades, evidenciando que, mediante el proceso nitruracion postoxidacion ionica, es posible obtener caracteristicas similares en dureza y mejores en resistencia a la corrosion que las tipicas obtenidas para el cromo duro. Los resultados obtenidos permiten postular una tecnica que no dana al medio ambiente, como lo es la nitruracion post-oxidacion ionica, como candidata potencial para sustituir las tecnicas galvanicas altamente contaminantes para aplicacion de cromo duro.

  14. A continuum method for modeling surface tension

    Science.gov (United States)

    Brackbill, J. U.; Kothe, D. B.; Zemach, C.

    1992-01-01

    In the novel method presented for modeling the effects of surface tension on fluid motion, the interfaces between fluids with different, color-represented properties are finite-thickness transition regions across which the color varies continuously. A force density proportional to the surface curvature of constant color is defined at each point in the transition region; this force-density is normalized in such a way that the conventional description of surface tension on an interface is recovered when the ratio of local transition-reion thickness to local curvature radius approaches zero. The properties of the method are illustrated by computational results for 2D flows.

  15. Managing Tensions And Forging Creative Synergies Between ...

    African Journals Online (AJOL)

    Managing Tensions And Forging Creative Synergies Between Indigenous And Modern Settlement Planning Concepts And Practices: Lessons For The Design And Planning For ... The article also explores the planning principles, design concepts, standards and norms used in the planning and building of indigenous

  16. Surface Tension Measurements with a Smartphone

    Science.gov (United States)

    Goy, Nicolas-Alexandre; Denis, Zakari; Lavaud, Maxime; Grolleau, Adrian; Dufour, Nicolas; Deblais, Antoine; Delabre, Ulysse

    2017-01-01

    Smartphones are increasingly used in higher education and at university in mechanics, acoustics, and even thermodynamics as they offer a unique way to do simple science experiments. In this article, we show how smartphones can be used in fluid mechanics to measure surface tension of various liquids, which could help students understand the concept…

  17. On Surface Tension for Compact Stars

    Indian Academy of Sciences (India)

    In an earlier analysis it was demonstrated that general relativity gives higher values of surface tension in strange stars with quark matter than neutron stars. We generate the modified Tolman–Oppenheimer–Volkoff equation to incorporate anisotropic matter and use this to show that pressure anisotropy provides for a wide ...

  18. Exact analytical density profiles and surface tension

    Indian Academy of Sciences (India)

    to nonideality, which distinguish electrolyte from nonelectrolyte solutions. An example is provided by the excess surface tension for an air–water interface, which is determined by the excess particle density, and which was first calculated by Onsager and Samaras. Because of the discrepancy between the dielectric constants ...

  19. Measuring the surface tension of soap bubbles

    Science.gov (United States)

    Sorensen, Carl D.

    1992-01-01

    The objectives are for students to gain an understanding of surface tension, to see that pressure inside a small bubble is larger than that inside a large bubble. These concepts can be used to explain the behavior of liquid foams as well as precipitate coarsening and grain growth. Equipment, supplies, and procedures are explained.

  20. Tension band fixation of medial malleolus fractures.

    Science.gov (United States)

    Ostrum, R F; Litsky, A S

    1992-01-01

    A prospective study on tension band fixation of medial malleolus fractures was performed on 30 consecutive patients with 31 fractures from October 1987 until December 1990. All patients had at least a displaced medial malleolus fracture unreduced by closed methods. The fractures were classified into small, medium and large using a modified Lauge-Hansen classification. There were no nonunions or movements of wires postoperatively and only two patients had subjective complaints with reference to the wires that required hardware removal. There was one 2-mm malreduction and one patient with a wound slough and subsequent osteomyelitis. One fragment had 2 mm of displacement after fixation but went on to union. A biomechanical study was undertaken to compare fixation of the medial malleolus with K wires alone, K wires plus a tension band, and two cancellous screws. The tension band fixation provided the greatest resistance to pronation forces: for times stiffer than the two screws and 62% of the intact specimen. Tension band fixation of the medial malleolus is a biomechanically strong and clinically acceptable method of treatment for displaced medial malleolus fractures. This method of fixation may be especially useful for small fragments and in osteoporotic bone.

  1. Mechanotransduction: vinculin provides stability when tension rises

    NARCIS (Netherlands)

    Spanjaard, E.; de Rooij, J.

    2013-01-01

    By beautiful imaging and state-of-the-art experiments, vinculin is established to be a central switch in mechanotransduction at integrin-based focal adhesions. Cycles of tension-regulated vinculin switching control focal adhesion dynamics and signaling to enable polarized cell migration and

  2. Intraoperative Development of Tension Pneumocephalus in a ...

    African Journals Online (AJOL)

    result in intracranial hypertension. This condition, termed. “tension pneumocephalus,” is a neurosurgical emergency and if left untreated may cause rapid neurological deterioration, herniation, and death.[4-6]. Nitrous oxide (N2O), often administered as a component of general anesthesia, has also been implicated in.

  3. Multiple Intelligences: Its Tensions and Possibilities

    Science.gov (United States)

    Eisner, Elliot W.

    2004-01-01

    This article explores the tensions between Howard Gardner's theory of multiple intelligences and current educational policies emphasizing standardized and predictable outcomes. The article situates Gardner's theory within the historical interests among psychometricians in identifying those core processes that constitute human intelligence.…

  4. Focal adhesions, stress fibers and mechanical tension

    Energy Technology Data Exchange (ETDEWEB)

    Burridge, Keith, E-mail: Keith_Burridge@med.unc.edu [Department of Cell Biology and Physiology, and Lineberger Comprehensive Cancer Center, 12-016 Lineberger, CB#7295, University of North Carolina, Chapel Hill, NC (United States); Guilluy, Christophe, E-mail: christophe.guilluy@univ-nantes.fr [Inserm UMR-S1087, CNRS UMR-C6291, L' institut du Thorax, and Université de Nantes, Nantes (France)

    2016-04-10

    Stress fibers and focal adhesions are complex protein arrays that produce, transmit and sense mechanical tension. Evidence accumulated over many years led to the conclusion that mechanical tension generated within stress fibers contributes to the assembly of both stress fibers themselves and their associated focal adhesions. However, several lines of evidence have recently been presented against this model. Here we discuss the evidence for and against the role of mechanical tension in driving the assembly of these structures. We also consider how their assembly is influenced by the rigidity of the substratum to which cells are adhering. Finally, we discuss the recently identified connections between stress fibers and the nucleus, and the roles that these may play, both in cell migration and regulating nuclear function. - Highlights: • The different types of stress fiber and focal adhesion are described. • We discuss the controversy about tension and assembly of these structures. • We describe the different models used to investigate assembly of these structures. • The influence of substratum rigidity is discussed. • Stress fiber connections to the nucleus are reviewed.

  5. Forensic testing of post tensioned concrete girders.

    Science.gov (United States)

    2014-07-01

    Recently, two separate Interstate 15 highway bridges over the 400 South roadway in Orem, Utah were demolished : after 50 years of service. A total of four post-tensioned girders were salvaged from both the north-bound and : south-bound bridge. A seri...

  6. Tension in Chemistry and Its Contents

    Science.gov (United States)

    Hoffmann, Roald

    2015-01-01

    This article makes a case for a positive role of tension in the creative process in chemistry. I begin with an argument that there is an inherent tension in what makes molecules interesting—their positioning along various polar axes. One of these, the age-old differentiation between useful (to society and for personal profit) commercialization and pure understanding of molecules and their reactions is characteristic. The question of whether there are any bad molecules then leads me to ethical concerns in chemistry, and a particular working out of these in interactions of chemists in the Middle East. An analysis is made of the special tensions involved in publishing, especially in citation ethics; chemists publish a lot, so this is situation ethics worked out on a daily basis. I then find in the literature of psychology good evidence for the positive value of moderate stress in stimulating creativity. It is obvious that too much tension leads to distress, and there are some institutional aspects of chemistry that do not come out well here. But all in all, the dynamic middle is alive, and it leads to good new science. PMID:26155730

  7. Surface tension of aqueous electrolyte solutions. Thermodynamics

    NARCIS (Netherlands)

    Drzymala, J.; Lyklema, J.

    2012-01-01

    A thermodynamic theory is developed for obtaining the enthalpic and entropic contributions to the surface excess Gibbs energy of electrolyte solutions from the dependence of the surface tension on concentration and temperature. For elaboration, accurate activity coefficients in solution as functions

  8. Normal tension glaucoma and Alzheimer disease

    DEFF Research Database (Denmark)

    Bach-Holm, Daniella; Kessing, Svend Vedel; Mogensen, Ulla

    2012-01-01

    PURPOSE: To investigate whether normal tension glaucoma (NTG) is associated with increased risk of developing dementia/Alzheimer disease (AD). METHODS: A total of 69 patients with NTG were identified in the case note files in the Glaucoma Clinic, University Hospital of Copenhagen (Rigshospitalet...

  9. Tension Tests On Bored Piles In Sand

    DEFF Research Database (Denmark)

    Krabbenhøft, Sven; Clausen, Johan; Damkilde, Lars

    2006-01-01

    The lengths of the bored piles varied from 2 m to 6 m and all were of a diameter of 140 mm. The piles were tested to failure in tension and the load-displacement relations were recorded. The investigation has shown pronounced differences between the load bearing capacities obtained by different...

  10. Exploratory experimental investigations on post-tensioned structural glass beams

    DEFF Research Database (Denmark)

    Louter, C.; Nielsen, Jens Henrik; Belis, J.

    2013-01-01

    This paper discusses two projects on post-tensioned glass beams, performed at EPFL and DTU, respectively. In these projects small scale glass beams (length of 1.5m and 1m) are post-tensioned by means of steel threaded rods tensioned at the beam ends. The purpose of post-tensioning glass beams...... is to enhance the initial failure stress of the glass and to obtain ductile (post-breakage) performance. From four-point bending tests on the post-tensioned glass beam specimens it is observed that these goals are reached. From the test results it is concluded that post-tensioning glass beams is a feasible...

  11. Individualization of radiographic techniques in computerized radiology; Individualizacao das tecnicas radiograficas em radiologia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Abrantes, M.E.S.; Oliveira, A.H. de, E-mail: marcosabrantes2003@yahoo.com.br [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Feliz, W.F.; Stoppa, L.G.; Paiva, O.A. [Universidade Federal de Minas Gerais (UFADTI/UFMG), Belo Horizonte, MG (Brazil). Hospital das Clinicas. Unidade Funcional Apoio Diagnostico e Terapeutica por Imagem; Oliveira, G.A.P. [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Anatomia e Imagem

    2015-07-01

    This work aims to produce information for image quality implementation in a radiology sector based on previous assessments of the images by questionnaires, acceptance and quality, as step of recognition of the parameters used in radiographic techniques. After this research data raised were divided into male group, female, PA and PF thickness, body mass index, type of biotypes, anthropomorphic parameters, body evaluation associated with the constant tension and additional filtration. The results show the predominance of the 35 and 40 constant with additional filtering from 0.5 to 1.5 mmAl, voltage for male gender (PA PF) 86-92 kV and 96-112 kV voltage for female gender of 85-98 kV and 96-112 kV, respectively. The load applied to the tube for males (PA and PF) is between 5-10 and 5-16 mA.s mA.s and for females (PA and PF) is between 6.3 to 8 mA.s and 9-14 mA.s.

  12. Necessary Tension in Marine Risers Tension des colonnes montantes en mer

    Directory of Open Access Journals (Sweden)

    Lubinski A.

    2006-11-01

    Full Text Available The tension governing transverse static and dynamic deflections in a riser is not the actual tension but the so-called « effective tension » The concept of effective tension and effective compression is thoroughly explained, and means for calculating effective forces are given. Numerical examples are worked out for risers whose length is between 152 m (520 ft and 920 m (3020 ft. The reciprocal of maximum bending moment of the vicinity of the hall joint is plotted versus the effective tension of the ball joint. Bending moments used were obtained through use of static and dynamic computer programs applied ta a variety of conditions of wave loading, use or non-use of buoyant moterial sleeves, etc. The most important parameters affecting riser performance are the effective La tension régissant les déflections transversales statiques et dynamiques d'une colonne montante n'est pas la tension réelle mais ce qu'on appelle « la tension effective ». Le concept de tension ou de compression effective est expliqué en détail et la façon de calculer les forces effectives est indiquée dans cet article. Des exemples numériques sont développés pour des colonnes montantes de longueur comprise entre 152 m (520 ft et 920 m (3 020 ft. On a tracé la courbe de l'inverse du moment fléchissant en fonction de la tension effective à l'articulation. Les moments fléchissants utilisés ont été calculés par ordinateur en utilisant des programmes dynamiques et statiques pour des conditions variées d'action des vagues, la colonne montante étant ou non munie de manchettes de flottabilité, etc. Les deux paramètres les plus importants qui affectent le bon comportement d'une colonne montante sont la tension effective et la charge latérale.

  13. A comparison of cation sampling in forest soils by tension and tension-free lysimeters

    Science.gov (United States)

    James H. Miller

    1981-01-01

    Field tests conducted in two soils with ceramic cup, ceramic plate, and tension-free lysimeters showed no concentration differences in collected cations (Ca, Mg, K, Na) between cups and plates, except for the hydrogen ion. Mean pH was 0.6 lower in cup collected samples for a sandy loam profile. Tension-free lysimeters of the design tested had persistent contamination...

  14. Advantages of the synthetic technique for the conduction of short circuit tests to breakers; Ventajas de la tecnica sintetica para realizar pruebas de corto circuito a interruptores

    Energy Technology Data Exchange (ETDEWEB)

    Sibilski, Henry [Instituto Electrotecnico de Varsovia, Varsovia (Poland); Ochoa Vivanco, Ruben [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    In this article the operational principle of the synthetic test is described; specifically of the current injection circuit in parallel. Its utilization in the research and development of new breaker models and its wide possibilities regarding its testing characteristics is outlined. Likewise the different tests that can be performed by means of the synthetic technique are described. Finally the importance of the synthetic tests is outlined for the development of own technology in the area of interruption equipment and emphasis is made that in industrialized countries this technique is of common practice. [Espanol] En este articulo se describe el principio de operacion de la prueba sintetica; especificamente del circuito de inyeccion de corriente en paralelo. Se destaca su utilizacion en la investigacion y desarrollo de nuevos modelos de interruptores y sus amplias posibilidades en cuanto a caracteristicas de prueba. Asimismo, se describen las diferentes pruebas que pueden realizarse mediante la tecnica sintetica. Por ultimo, se destaca la importancia de las pruebas sinteticas para el desarrollo de tecnologia propia en el area de equipos de interrupcion, y se hace notar que en paises desarrollados, esta tecnica es practica comun.

  15. Static tensioning promotes hamstring tendons force relaxation more reliably than cycling tensioning.

    Science.gov (United States)

    Piedade, Sérgio Rocha; Dal Fabbro, Inácio Maria; Mischan, Martha Maria; Piedade, Cezar; Maffulli, Nicola

    2017-08-01

    Graft elongation might be a major reason for increased anterior laxity after anterior cruciate ligament (ACL) reconstruction. This study analyzed the force relaxation values and their stabilization when single strands of the gracilis and semitendinosus tendons underwent cyclic and static tensioning at 2.5% strain level, and compared the efficiency of static and cyclic tensioning in promoting force relaxation. Eighteen gracilis tendons and 18 semitendinosus tendons from nine male cadavers (mean age: 22.44years) were subjected to 10 in vitro cyclic loads at 2.5% strain level, or to a static load at 2.5% strain level. During cyclic loading, the reduction in force values tended to stabilize after the sixth cyclic load, while, in the case of static loading, this stabilization occurred by the second minute. Comparing static and cyclic loading, the gracilis tendon had similar mechanical responses in both conditions, while the semitendinosus tendon showed greater force relaxation in static compared with cyclic loading. Considering that the semitendinosus tendon is the main component of the hamstring graft, its biomechanical response to loading should guide the tensioning protocol. Therefore, static tensioning seems more effective for promoting force relaxation of the semitendinosus tendon than cyclic tensioning. The gracilis tendon showed a similar mechanical response to either tensioning protocols. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Surface and interfacial tension measurement, theory, and applications

    CERN Document Server

    Hartland, Stanley

    2004-01-01

    This edited volume offers complete coverage of the latest theoretical, experimental, and computer-based data as summarized by leading international researchers. It promotes full understanding of the physical phenomena and mechanisms at work in surface and interfacial tensions and gradients, their direct impact on interface shape and movement, and their significance to numerous applications. Assessing methods for the accurate measurement of surface tension, interfacial tension, and contact angles, Surface and Interfacial Tension presents modern simulations of complex interfacial motions, such a

  17. Assessment and reduction of diaphragmatic tension during hiatal hernia repair.

    Science.gov (United States)

    Bradley, Daniel Davila; Louie, Brian E; Farivar, Alexander S; Wilshire, Candice L; Baik, Peter U; Aye, Ralph W

    2015-04-01

    During hiatal hernia repair there are two vectors of tension: axial and radial. An optimal repair minimizes the tension along these vectors. Radial tension is not easily recognized. There are no simple maneuvers like measuring length that facilitate assessment of radial tension. The aims of this project were to: (1) establish a simple intraoperative method to evaluate baseline tension of the diaphragmatic hiatal muscle closure; and, (2) assess if tension is reduced by relaxing maneuvers and if so, to what degree. Diaphragmatic characteristics and tension were assessed during hiatal hernia repair with a tension gage. We compared tension measured after hiatal dissection and after relaxing maneuvers were performed. Sixty-four patients (29 M:35F) underwent laparoscopic hiatal hernia repair. Baseline hiatal width was 2.84 cm and tension 13.6 dag. There was a positive correlation between hiatal width and tension (r = 0.55) but the strength of association was low (r (2) = 0.31). Four different hiatal shapes (slit, teardrop, "D", and oval) were identified and appear to influence tension and the need for relaxing incision. Tension was reduced by 35.8 % after a left pleurotomy (12 patients); by 46.2 % after a right crural relaxing incision (15 patients); and by 56.1 % if both maneuvers were performed (6 patients). Tension on the diaphragmatic hiatus can be measured with a novel device. There was a limited correlation with width of the hiatal opening. Relaxing maneuvers such as a left pleurotomy or a right crural relaxing incision reduced tension. Longer term follow-up will determine whether outcomes are improved by quantifying and reducing radial tension.

  18. Bending Under Tension Test with Direct Friction Measurement

    DEFF Research Database (Denmark)

    Andreasen, Jan Lasson; Olsson, David Dam; Chodnikiewicz, K.

    2006-01-01

    A special Bending-Under-Tension (BUT) transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool-pin under constant back tension. The front tension, back tension and torque on the tool-pin are all...... in drawing of stainless steel showing the influence of varying process conditions and the performance of different lubricants....

  19. Tensions generated in a lateral fabellotibial suture model. Comparison of methods of application of tension, fixation of tension and suture material.

    Science.gov (United States)

    Burton, A F; Horstman, C; Mason, D R

    2015-01-01

    To compare suture tension on a simulated lateral fabellotibial suture model using various methods of application of tension, fixation, and suture materials. Veterinarians constructed simulated lateral fabellotibial suture constructs on a tying stand with a force sensor. Participants used combinations of 45 kg test monofilament nylon, metric 7 braided polyethylene, crimps, crimper, or knots, with their choice of instruments to secure the constructs. The tension in completed constructs was measured and comparisons were made between nylon and polyethylene, the use of crimps compared to knots, and the use of a mechanical distractor compared to hand tightening techniques. A value of p tensions generated ranged from 1.4-171.0N. The median tension of nylon sutures (43.9N ± 44.7N) was significantly greater than polyethylene sutures (9.5 N ± 19.6N). The median tension of constructs secured with crimps (62.8N ± 42.4N) was significantly greater than constructs secured with knots (11.8 N ± 14.8N). The mechanical distractor generated significantly higher median tension (78N ± 50.4N), compared to methods without the device (18.6 N ± 25.1N). There was a large variability in the tension generated in simulated lateral fabellotibial constructs. Veterinarians who used nylon, crimps, and the mechanical tensioner generated constructs with greater tensions.

  20. Tensions of Teaching Media Literacy in Teacher Education

    Science.gov (United States)

    Ngomba-Westbrook, Nalova Elaine

    2013-01-01

    This study investigates the tensions a teacher educator faces in facilitating a media literacy teacher education course at the university level. Teaching tensions are conceptualized as a three-tier framework. At the first level, tensions may arise in the selection and application of pedagogies associated with critical and new/21st century…

  1. Investigating the tension load of rubber composites by impact ...

    Indian Academy of Sciences (India)

    An increase in the allowable stress when the belt is tensioned was examined during the test, to determine the effect of impact on the tension load. The obtained values of tension load are assessed using basic mathematical and statistical methods. Using the Design of Experiments method, factors that significantly affect the ...

  2. Surface Tension and Fingering of Miscible Interfaces

    Science.gov (United States)

    Abib, Mohammed; Liu, Jian-Bang; Ronney, Paul D.

    1999-01-01

    Experiments on miscible, buoyantly unstable reaction-diffusion fronts and non-reacting displacement fronts in Hele-Shaw cells show a fingering-type instability whose wavelengths (lambda*) are consistent with an interfacial tension (sigma) at the front caused by the change in chemical composition, even though the solutions are miscible in all proportions. In conjunction with the Saffman-Taylor model, the relation sigma = K/tau, where tau is the interface thickness and K approximately equal 4 +/- 2 x 10(exp -6) dyne, enables prediction of our measured values of lambda* as well as results from prior experiments on miscible interfaces. These results indicate that even for miscible fluids, surface tension is generally a more significant factor than diffusion in interfacial stability and flow characteristics.

  3. Cognitive function in tension-type headache.

    Science.gov (United States)

    Waldie, Karen E; Welch, David

    2007-12-01

    The association between tension-type headache and cognitive ability was assessed among 971 members of a longitudinal birth cohort study. Primary headache status was determined at age 32 years according to 2004 International Headache Society criteria, frequent childhood headaches were identified from parent report from ages 7 to 13 years, and data relating to cognitive and academic performance from ages 3 to 32 years were analyzed. Adult study members with tension-type headache did not score worse on any of the cognitive measures relative to headache-free controls or headache-free tinnitus sufferers. Instead, a consistent relation was found between childhood headache (regardless of headache diagnosis in adulthood) and lower scores on most cognitive measures from age 3 years through adolescence (verbal and performance IQ, receptive language, and reading scores). The data indicate that cognitive performance deficits in childhood headache sufferers can probably be attributed to factors stemming from utero or early childhood.

  4. Thermal Analysis of Bending Under Tension Test

    DEFF Research Database (Denmark)

    Ceron, Ermanno; Martins, Paulo A.F.; Bay, Niels

    2014-01-01

    sometimes can cause lubricant film breakdown and galling. In order to replicate the production conditions in bending under tension testing it is thus important to control the tool/workpiece interface temperature. This can be done by pre-heating the tool, but it is essential that the interface temperature......The tribological conditions in deep drawing can be simulated in the Bending Under Tension test to evaluate the performance of new lubricants, tool materials, etc. Deep drawing production with automatic handling runs normally at high rate. This implies considerable heating of the tools, which...... during testing is similar to the one in the production tool. A universal sheet tribo-tester has been developed, which can run multiple tests automatically from coil. This allows emulating the temperature increase as in production. The present work performs finite element analysis of the evolution...

  5. Separation anxiety: Stress, tension and cytokinesis

    Energy Technology Data Exchange (ETDEWEB)

    Mohan, Krithika [Department of Electrical and Computer Engineering, The Johns Hopkins University, 3400 N. Charles Street, Baltimore, MD 21218 (United States); Iglesias, Pablo A., E-mail: pi@jhu.edu [Department of Electrical and Computer Engineering, The Johns Hopkins University, 3400 N. Charles Street, Baltimore, MD 21218 (United States); Robinson, Douglas N., E-mail: dnr@jhmi.edu [Department of Cell Biology, Johns Hopkins University School of Medicine, 725 N. Wolfe Street, Baltimore, MD 21205 (United States)

    2012-07-15

    Cytokinesis, the physical separation of a mother cell into two daughter cells, progresses through a series of well-defined changes in morphology. These changes involve distinct biochemical and mechanical processes. Here, we review the mechanical features of cells during cytokinesis, discussing both the material properties as well as sources of stresses, both active and passive, which lead to the observed changes in morphology. We also describe a mechanosensory feedback control system that regulates protein localization and shape progression during cytokinesis. -- Highlights: Black-Right-Pointing-Pointer Cytokinesis progresses through three distinct mechanical phases. Black-Right-Pointing-Pointer Cortical tension initially resists deformation of mother cell. Black-Right-Pointing-Pointer Late in cytokinesis, cortical tension provides stress, enabling furrow ingression. Black-Right-Pointing-Pointer A mechanosensory feedback control system regulates cytokinesis.

  6. Surface Tension Demonstration Aboard the ISS

    Science.gov (United States)

    2003-01-01

    Astronaut Donald R. Pettit, Expedition Six NASA ISS science officer, photographed this view of a surface tension demonstration using water that is held in place by a metal loop. The experiment took place in the Destiny laboratory on the International Space Station (ISS). The Expedition Six crew was delivered to the station via the Space Shuttle Orbiter Endeavor STS-113 mission which was launched on November 23, 2002.

  7. Surface tension confined liquid cryogen cooler

    Science.gov (United States)

    Castles, Stephen H.; Schein, Michael E.

    1989-04-01

    A cryogenic cooler is provided for use in craft such as launch, orbital, and space vehicles subject to substantial vibration, changes in orientation, and weightlessness. The cooler contains a small pore, large free volume, low density material to restrain a cryogen through surface tension effects during launch and zero-g operations and maintains instrumentation within the temperature range of 10 to 140 K. The cooler operation is completely passive, with no inherent vibration or power requirements.

  8. A microprocessor based portable bolt tension monitor

    Science.gov (United States)

    Perey, D. F.

    1991-01-01

    A bolt tension monitor (BTM) which uses ultrasonics and a pulsed phase locked loop circuit to measure load-induced acoustic phase shifts which are independent of friction is described. The BTM makes it possible to measure the load in a bolt that was tightened at some time in the past. This capability to recertify a load after-the-fact will help to insure the integrity of a bolted joint.

  9. Conjunctival oxygen tension at high altitude.

    Science.gov (United States)

    Mader, T H; Friedl, K E; Mohr, L C; Bernhard, W N

    1987-01-01

    Transconjunctival oxygen tension (PcjO2) was studied using a hypobaric chamber and during mountaineering excursions. Measurements obtained during acute chamber exposures (15-20 min) at sea level, 1829 m (6,000 ft), 3048 m (10,000 ft), 4267 m (14,000 ft) and return to sea level were (means +/- SEM): 60.1 +/- 2.7, 49.1 +/- 1.8, 38.3 +/- 2.4, 27.4 +/- 1.5, and 61.1 +/- 2.8 mm Hg, respectively (n = 13). The ratio of PcjO2 to arterial blood oxygen tension (PaO2) did not change in a consistent manner between sea level and 4267 m; PcjO2 was 74 +/- 6.9% of PaO2. The 16 subjects participating in the mountaineering phase of the study revealed similar means at sea level and 1829 m (57.4 +/- 2.4 and 46.3 +/- 1.9 mm Hg respectively), but a smaller decrement was observed at 3048 m (43.0 +/- 1.6 mm Hg). The difference between mountain and chamber values may be accounted for by a partial acclimatization to altitude brought about by longer exposure on the mountain excursions. A comparison between PcjO2 and transcutaneous oxygen tension during the chamber study suggests that a greater precision and sensitivity is obtained with measurement of oxygen tension at the conjunctival site. PcjO2 measurement is a non-invasive reflection of PaO2 which is suitable for continuous monitoring during hypoxia studies.

  10. Toward a general psychological model of tension and suspense

    Directory of Open Access Journals (Sweden)

    Moritz eLehne

    2015-02-01

    Full Text Available Tension and suspense are powerful emotional experiences that occur in a wide variety of contexts (e.g., in music, film, literature, and everyday life. The omnipresence of tension experiences suggests that they build on very basic cognitive and affective mechanisms. However, the psychological underpinnings of tension experiences remain largely unexplained, and tension and suspense are rarely discussed from a general, domain-independent perspective. In this paper, we argue that tension experiences in different contexts (e.g., musical tension or suspense in a movie build on the same underlying psychological processes. We discuss key components of tension experiences and propose a domain-independent model of tension and suspense. According to this model, tension experiences originate from states of conflict, instability, dissonance, or uncertainty that trigger predictive processes directed at future events of emotional significance. We also discuss possible neural mechanisms underlying experiences of tension. The model provides a theoretical framework that can inform future empirical research on tension phenomena.

  11. Toward a general psychological model of tension and suspense

    Science.gov (United States)

    Lehne, Moritz; Koelsch, Stefan

    2015-01-01

    Tension and suspense are powerful emotional experiences that occur in a wide variety of contexts (e.g., in music, film, literature, and everyday life). The omnipresence of tension and suspense suggests that they build on very basic cognitive and affective mechanisms. However, the psychological underpinnings of tension experiences remain largely unexplained, and tension and suspense are rarely discussed from a general, domain-independent perspective. In this paper, we argue that tension experiences in different contexts (e.g., musical tension or suspense in a movie) build on the same underlying psychological processes. We discuss key components of tension experiences and propose a domain-independent model of tension and suspense. According to this model, tension experiences originate from states of conflict, instability, dissonance, or uncertainty that trigger predictive processes directed at future events of emotional significance. We also discuss possible neural mechanisms underlying tension and suspense. The model provides a theoretical framework that can inform future empirical research on tension phenomena. PMID:25717309

  12. Surface tension measurement from the indentation of clamped thin films.

    Science.gov (United States)

    Xu, Xuejuan; Jagota, Anand; Paretkar, Dadhichi; Hui, Chung-Yuen

    2016-06-21

    We developed an indentation technique to measure the surface tension of relatively stiff solids. In the proposed method, a suspended thin solid film is indented by a rigid sphere and its deflection is measured by optical interferometry. The film deflection is jointly resisted by surface tension, elasticity and residual stress. Using a version of nonlinear von Karman plate theory that includes surface tension, we are able to separate the contribution of elasticity to the total tension in the film. Surface tension is determined by extrapolating the sum of surface tension and residual stress to zero film thickness. We measured the surface tension of polydimethylsiloxane (PDMS) using this technique and obtained a value of 19.5 ± 3.6 mN m(-1), consistent with the surface energy of PDMS reported in the literature.

  13. Menstrual tension-type headache: evidence for its existence.

    Science.gov (United States)

    Arjona, Antonio; Rubi-Callejon, Jose; Guardado-Santervas, Pedro; Serrano-Castro, Pedro; Olivares, Jesus

    2007-01-01

    To determine whether menstrual tension-type headache is a real disorder. An appendix was included in the second edition of the International Classification of Headache Disorders by the International Headache Society. Diagnostic criteria are proposed in this appendix for 2 types of menstrual migraine: pure menstrual migraine without aura and menstrually related migraine without aura. References to menstrual tension-type headache do not appear in this classification. In a neurological outpatient clinic 165 patients were identified in whom headache was related to menstruation and the criteria of the International Classification of Headache Disorders for menstrual migraine adapted to menstrual tension-type headache were applied. Twenty-one patients met the criteria of menstrual tension-type headache, 6 for pure menstrual tension-type headache, and 15 for menstrually related tension-type headache. Menstrual tension-type headache is a real condition that should be recognized in the International Classification of Headache Disorders.

  14. Superficial tension: experimental model with simple materials

    Directory of Open Access Journals (Sweden)

    Tintori Ferreira, María Alejandra

    2012-09-01

    Full Text Available In this work appears a didactic offer based on an experimental activity using materials of very low cost, orientated to achieving that the student understand and interpret the phenomenon of superficial tension together with the importance of the modeling in sciences. It has as principal aim of education bring the student over to the mechanics of the static fluids and the intermolecular forces, combining scientific contents with questions near to the student what provides an additional motivation to the reflection of the scientific investigation.

  15. Surface Tension Driven Convection Experiment Completed

    Science.gov (United States)

    Jacobson, Thomas P.; Sedlak, Deborah A.

    1997-01-01

    The Surface Tension Driven Convection Experiment (STDCE) was designed to study basic fluid mechanics and heat transfer on thermocapillary flows generated by temperature variations along the free surfaces of liquids in microgravity. STDCE first flew on the USML-1 mission in July 1992 and was rebuilt for the USML-2 mission that was launched in October 1995. This was a collaborative project with principal investigators from Case Western Reserve University (CWRU), Professors Simon Ostrach and Yasuhiro Kamotani, along with a team from the NASA Lewis Research Center composed of civil servants and contractors from Aerospace Design & Fabrication, Inc. (ADF), Analex, and NYMA, Inc.

  16. Small-Bolt Torque-Tension Tester

    Science.gov (United States)

    Posey, Alan J.

    2009-01-01

    The device described here measures the torque-tension relationship for fasteners as small as #0. The small-bolt tester consists of a plate of high-strength steel into which three miniature load cells are recessed. The depth of the recess is sized so that the three load cells can be shimmed, the optimum height depending upon the test hardware. The three miniature load cells are arranged in an equilateral triangular configuration with the test bolt aligned with the centroid of the three. This is a kinematic arrangement.

  17. Development of an electronic ballast with high power factor, using cd/cd conversion techniques for fluorescent lamps; Desarrollo de un balastro electronico con alto factor de potencia, utilizando tecnicas de conversion cd/cd para lamparas fluorescentes

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Raul Antonio

    1995-02-01

    Continuo (MCC), debido a las prestaciones que este convertidor ofrece [11]. La tecnica de control que se utilizo para este convertidor fue el control Modo Corriente Promedio (MCP). Cabe mencionar que en esta etapa de CFP se llevo a cabo un analisis comparativo en forma practica, en la que tambien se probaron dos topologias mas que fueron el convertidor Sepic y Cuk en modo de control seguidor de tension. Estas dos topologias fueron desarrolladas de manera independiente a este proyecto de tesis y no fueron implementadas al balastro como etapa de correccion activa del FP. En la etapa de manejo a la lampara, se uso un convertidor CD/CA en configuracion Push-Pull, en el que se utilizo la tecnica de control PWM para el manejo de la lampara fluorescente. La utilizacion de balastros electronicos en alta frecuencia dentro del rango de 20 a 50 KHz [6,7], hace que se presenten menores perdidas de potencia y favorece los procesos fisicos de la descarga (seccion 1.2.2.)(abstract truncated)

  18. Interpreting expressive performance through listener judgments of musical tension

    Science.gov (United States)

    Farbood, Morwaread M.; Upham, Finn

    2013-01-01

    This study examines listener judgments of musical tension for a recording of a Schubert song and its harmonic reduction. Continuous tension ratings collected in an experiment and quantitative descriptions of the piece's musical features, include dynamics, pitch height, harmony, onset frequency, and tempo, were analyzed from two different angles. In the first part of the analysis, the different processing timescales for disparate features contributing to tension were explored through the optimization of a predictive tension model. The results revealed the optimal time windows for harmony were considerably longer (~22 s) than for any other feature (~1–4 s). In the second part of the analysis, tension ratings for the individual verses of the song and its harmonic reduction were examined and compared. The results showed that although the average tension ratings between verses were very similar, differences in how and when participants reported tension changes highlighted performance decisions made in the interpretation of the score, ambiguity in tension implications of the music, and the potential importance of contrast between verses and phrases. Analysis of the tension ratings for the harmonic reduction also provided a new perspective for better understanding how complex musical features inform listener tension judgments. PMID:24416024

  19. Shape accuracy optimization for cable-rib tension deployable antenna structure with tensioned cables

    Science.gov (United States)

    Liu, Ruiwei; Guo, Hongwei; Liu, Rongqiang; Wang, Hongxiang; Tang, Dewei; Song, Xiaoke

    2017-11-01

    Shape accuracy is of substantial importance in deployable structures as the demand for large-scale deployable structures in various fields, especially in aerospace engineering, increases. The main purpose of this paper is to present a shape accuracy optimization method to find the optimal pretensions for the desired shape of cable-rib tension deployable antenna structure with tensioned cables. First, an analysis model of the deployable structure is established by using finite element method. In this model, geometrical nonlinearity is considered for the cable element and beam element. Flexible deformations of the deployable structure under the action of cable network and tensioned cables are subsequently analyzed separately. Moreover, the influence of pretension of tensioned cables on natural frequencies is studied. Based on the results, a genetic algorithm is used to find a set of reasonable pretension and thus minimize structural deformation under the first natural frequency constraint. Finally, numerical simulations are presented to analyze the deployable structure under two kinds of constraints. Results show that the shape accuracy and natural frequencies of deployable structure can be effectively improved by pretension optimization.

  20. Jamming of Knots along a Tensioned Chain

    Science.gov (United States)

    Doyle, Patrick; Narsimhan, Vivek; Renner, C. Benjamin

    In the limit of very long chains, coiled polymers almost always self-entangle and form knots. In this study, we characterize the motion of these knots along the chain contour when the chain is under very high tension. In this regime, we find that the knot exhibits glassy physics. For example, instead of moving continuously along the contour, the knot becomes kinetically trapped in long-lived, metastable states. This caging phenomenon follows Poisson statistics, and thus the long-time dynamics of the knot are diffusive. We quantify the long-time diffusivity of knots of various topologies, and we find that the diffusivity decays exponentially with increasing chain tension. The rate-of-decay of these transport properties is relatively insensitive to the knot's topology, which can be explained by examining the energy landscape of the self-reptation moves of the knot along the chain. Finally, we examine the role of bending and excluded volume interactions on this jamming phenomenon. Bending plays the biggest role in determining the onset of jamming, but the corrugation of the excluded volume interactions solely determines the rate-of-decay of the knot's transport properties. Now at Liquiglide.

  1. Effect of respiratory physiotherapy on arterial oxygen tension.

    Science.gov (United States)

    Hedstrand, U; Liw, M; Rooth, G; Ogren, C H

    1978-01-01

    The effect of deep breathing on arterial oxygen tension was investigated in 45 postoperative patients. Arterial oxygen tension was estimated by the transcutaneous oxygen tension method, which allows continuous non-invasive measurement of the arterial oxygen tension changes. Three deep breaths in 1 min, assisted by three respiratory therapy devices, were compared to a standard physiotherapy programme. A peak increase in arterial oxygen tension of 3--4.5 mmHg occurred after 1 min, and significantly increased values were seen for 2--4 min following deep breathing with the three respiratory devices. From the various physiotherapeutic procedures, verbally and manually assisted deep breathing gave a 7 mmHg PO2 peak and significantly increased values for 6 min. The sign mechanism is discussed in the light of the present knowledge of airway closure, which gives a satisfactory explanation of the short-lasting increase in oxygen tension.

  2. Laser induced spectroscopy breakdown (LIBS) application to heavy metal detection in soils; Applicazioni della tecnica Laser induced breakdown spectroscopy (LIBS) alla determinazione dei metalli pesanti nei suoli

    Energy Technology Data Exchange (ETDEWEB)

    Barbini, R.; Fantoni, R.; Palucci, A.; Ribezzo, S.; Colao, F. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Div. Fisica Applicata; Capitelli, F. [Bari, Univ., Bari (Italy). Dipt. di Biologia e Chimica Agroforestale ed Ambientale

    2000-07-01

    and the sample upon which the analytic use of LIBS technique relays. RSD % (Relative Standard Deviation) for LIBS and ICP data have been compared. LIBS values appeared systematically higher than the ICP ones. Also the correlation coefficients, calculated as the ratio between certified value and experimental one, both for LIBS and ICP, were considerably less close to one for LIBS than for ICP. In order to minimize the matrix effect, a model for correcting LIBS data by taking into account the plasma temperature experimentally determined both in the unknown and in the standard sample was introduced. Preliminary results showed a considerable improvement in the correlation coefficients for corrected LIBS data. Once the model validity is proven for different elements used in the plasma temperature determination, which is possible once known all the parameters of Boltzmann equation for experimental intensity spectral line, it is quite general and can be applied on all the samples and for all the elements. [Italian] Il LIBS (Laser induced breakdown spectroscopy) e' una tecnica spettroscopica sperimentale che trova applicazione nell'analisi di campioni di interesse ambientale, quali suoli e rocce, ed industriali, come leghe metalliche. In questo rapporto sono presentati i risultati dell'applicazione della tecnica a campioni eterogenei di suoli certificati dal Joint Research Centre di Ispra (Varese) per la valutazione delle concentrazioni di metalli pesanti di interesse agronomico (Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn). Nella tecnica LIBS, un impulso laser d'alta potenza e' focalizzato sul campione in modo da provocare sulla superficie dello stesso un piccolo volume di plasma. Le emissioni delle singole specie atomiche sono raccolte da fibra ottica e analizzate da un monocromatore e da un analizzatore ottico (iCCD). Il riconoscimento e l'assegnazione delle emissioni spettrali corrispondenti ai singoli elementi atomici permette di riconoscere la

  3. Hysteretic behavior of a belt tensioner: modeling and experimental investigation

    OpenAIRE

    Michon, Guilhem; Manin, Lionel; Dufour, Regis

    2005-01-01

    In this paper we describe the modeling of the hysteretic behavior of belt tensioners. An initial experimental device is composed only of the tensioner by using forcing frequencies, preloads and deflection amplitudes. It permits the identification of the parameters of the restoring force model used. Comparison of the measured and predicted force deflection loops of the tensioner subjected to large deflections permits preliminary validation of the model.The second experimental device consists o...

  4. Automatic Tension Adjuster For Flexible-Shaft Grinder

    Science.gov (United States)

    Burley, Richard K.; Hoult, William S.

    1990-01-01

    Flexible shaft of grinding tool automatically maintained in tension by air pressure. Probelike tool bent to reach hard-to-reach areas for grinding and polishing. Unless shaft held in tension, however, it rubs against its sheath, overheating and wearing out quickly. By taking up slack in flexible cable, tension adjuster reduces friction and enables tool to operate more efficiently, in addition to lengthening operating life.

  5. Diagnosis on line and off line of induction motors of low, medium and high voltage; Diagnostico en linea y fuera de linea de motores de induccion de baja, mediana y alta tension

    Energy Technology Data Exchange (ETDEWEB)

    Carvajal, Francisco Antonio; Ramirez, Jose Manuel; Arcos, Luis Fernando [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    The induction motors of low, medium and high voltage are the electrical equipment of greatest application in industry. The importance which they have in the different productive processes does necessary to assure its operative continuity. The anticipated detection of a possible cause of fault allows to plan, with maintenance aims, the programmed removal of the motor. In this article are presented the results of the activities nowadays performed by Management of Electrical Equipment of the Instituto de Investigaciones Electricas (IIE) for the development and application of online diagnosis techniques for induction motors up to 13.8 kV. [Spanish] Los motores de induccion de baja, mediana y alta tension son los equipos eletricos de mayor aplicacion en la industria. La importancia que tienen en los diferentes procesos productivos hace necesario asegurar su continuidad operativa. La deteccion anticipada de una posible causa de falla permite planear, con fines de mantenimiento, la remocion programada del motor. En este articulo se presentan los resultados de las actividades que realiza actualmente la Gerencia de equipos Electricos del Instituto de investigaciones Electricas (IIE) para el desarrollo y la aplicacion de tecnicas de diagnostico en linea para motores de induccion de hasta 13.8 kV.

  6. Heat transfer coefficients obtainment by means of naphthalene sublimation in air; Obtencion de coeficientes de transferencia de calor por medio de la tecnica de sublimacion de naftalina en aire

    Energy Technology Data Exchange (ETDEWEB)

    Perez Galindo, Jose Arturo; Garcia Gutierrez, Alonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1985-12-31

    This work describes the experimental technique for the sublimation of naphthalene in air which measures heat transfer coefficients through the use of the analogy between the transference phenomena of heat and mass. The technique used to substitute the experimental measurements of heat transfer, in which it is difficult to control the border thermal conditions, when they are dimmed by the omnipresent problem of heat conduction through the walls of the transference surfaces. Two examples are included of the application technique and its potential is outlined. [Espanol] En este trabajo se describe la tecnica experimental de la sublimacion de naftalina en aire mediante la que se miden coeficientes de transferencia de masa. Los datos asi obtenidos pueden convertirse en coeficientes de transferencia de calor a traves del uso de la analogia entre los fenomenos de transferencia de calor y masa. La tecnica se utiliza para substituir las mediciones experimentales de transferencia de calor, en las que es dificil controlar las condiciones termicas de frontera, cuando las empana el problema omnipresente de la conduccion de calor a traves de las paredes de las superficies de transferencia. Se incluyen dos ejemplos de la aplicacion de la tecnica y se destaca su potencial.

  7. Tension stiffening of steel-fiber-reinforced concrete

    Directory of Open Access Journals (Sweden)

    Luiz Álvaro Oliveira Júnior

    2016-08-01

    Full Text Available In this paper, the mechanical behavior of steel-fiber-reinforced concrete was investigated to analyze the influence of steel fibers on tension stiffening. Using tension tests, the tension stiffening coefficient was evaluated through the load versus strain responses obtained from strain gages fixed to reinforcement steels. Moreover, an empirical model is proposed to estimate the tension stiffening coefficient of steel-fiber-reinforced concrete from reinforcement strains. From the test results, it was verified that the addition of steel fibers to concrete reduced the reinforcement steel strains and the crack width and increased the stiffness of cracked concrete, mainly in concretes reinforced with highvolumesof fibers.

  8. Biaxial tension on polymer in thermoforming range

    Directory of Open Access Journals (Sweden)

    Billon N.

    2010-06-01

    Full Text Available This paper presents an experimental characterization of mechanical properties of a polyethylene terephtalate (PET resin classically used in stretch blow moulding process. We have applied on such a material a well established experimental protocol at CEMEF, including new and relevant biaxial tensile tests. The experimental set-up relative to biaxial tension will be presented and described in a first part of the paper. Furthermore, we will focus on the experimental DMTA preliminary tests which are required to estimate the resin sensibility to temperature and strain rate in linear viscoelasticity domain. Finally, we will be interested in the material large strain behaviour: biaxial tensile results are presented and discussed. Finally, such an experimental approach should allow a relevant modelling of polymer physics and mechanics; this point will not be discussed here because of a lack of time.

  9. The Curriculum. Conceptual and Practical Tensions

    Directory of Open Access Journals (Sweden)

    Ángel Díaz Barriga

    2003-11-01

    Full Text Available The purpose of this essay is to analyze the formation of two currents in the field of curriculum. These currents, over the last century, were visualized in different ways: one which considers the educational project as linked to a system or an educational institution, a perspective expressed in the various proposals to develop study plans and programs; the other, which links it with concepts like everyday life, curriculum as educational practice and curricular reality, which vindicate what is happening in the educational environment, particularly in the classroom. This paper recognizes a meeting of both currents in the origins of the curriculum field in the early twentieth century; at the same time we analyze its evolution marked by mutual discrediting and ignorance that have generated tensions. It reflects on the need to identify the limitations of each current, but also to recognize their successes.

  10. Tension Type Headache: Evaluation of Chronic Type

    Directory of Open Access Journals (Sweden)

    Ömer Karadaş

    2013-11-01

    Full Text Available Tension type headache(TTH which is a primary headache has episodic and chronic forms. Episodic TTH (ETTH can also be frequent-type and non-frequent-type. According to population-based studies, annual prevalence rates are 38.3% for ETTH and 2.2% for chronic TTH (CTTH. Patients can shift between the sub-groups of TTH. In particular, patients with ETTH are at risk of developing CTTH. Peripheral and central nociceptive mechanism are thought to be responsible in occurrence of TTH. Psychiatric disorders are frequently associated with TTH. Although basic and combined analgesics are used in acute treatment and antidepresants are used in prophylaxis, new treatment modalities are needed.

  11. Evolving spacetimes with purely radial tension

    Directory of Open Access Journals (Sweden)

    B. Nasre Esfahani

    2000-12-01

    Full Text Available   In this study time-dependent and spherically symmetric solutions of the Einstein field equations in an anisotropic background with a purely radial tension are presented. There exist three classes of solutions,1 An open spacetime with a wormhole at its center. 2 A conical spacetime. 3 A closed spacetime. These inhomogeneous solutions are reduced to FRW spacetimes in matter-dominated era, asymptotically. Therefore, they can be used to describe local inhomogeneities that are not considered in the standard model. For the wormhole solution. it is explicity shown that the considered matter is non-exotic, that is, it does not violate the energy conditions. Also, static solutions are studied. There is only one static solution,a conical spacetime. In this case, the matter satisfies the energy condition critically.

  12. Tension Tests of Copper Thin Films

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyung Jo; Kim, Chung Youb [Chonnam Nat’l Univ., Gwangju (Korea, Republic of)

    2017-08-15

    Tension tests for copper thin films with thickness of 12 μm were performed by using a digital image correlation method based on consecutive digital images. When calculating deformation using digital image correlation, a large deformation causes errors in the calculated result. In this study, the calculation procedure was improved to reduce the error, so that the full field deformation and the strain of the specimen could be accurately and directly measured on its surface. From the calculated result, it can be seen that the strain distribution is not uniform and its variation is severe, unlike the distribution in a common bulk specimen. This might result from the surface roughness introduced in the films during the fabrication process by electro-deposition.

  13. Neurotrophic factors in tension-type headache

    Directory of Open Access Journals (Sweden)

    Renan B. Domingues

    2015-05-01

    Full Text Available Neurotrophic factors (NF are involved in pain regulation and a few studies have suggested that they may play a pathophysiological role in primary headaches. The aim of this study was to investigate NF levels in patients with tension type headache (TTH. We carried out a cross sectional study including 48 TTH patients and 48 age and gender matched controls. Beck Depression and Anxiety Inventories, and Headache Impact Test were recorded. Serum levels of NF were determined by ELISA. There were not significant differences between NF levels between TTH patients and controls. Patients with chronic and episodic TTH had not significant differences in NF levels. The presence of headache at the time of evaluation did not significantly alter the levels of NF. Depression and anxiety scores as well as headache impact did not correlate with NF levels. Our study suggest that the serum levels of NF are not altered in TTH.

  14. [Field of tension between psychomatics and psychiatry].

    Science.gov (United States)

    Kurt, H; Büchi, S; Haring, C; Pycha, R

    2012-11-01

    As a medical topic psychosomatic medicine is able to look back on an almost 100-year-old tradition. Nevertheless, questions about its definition, area of application and by whom it should be practiced remains unsolved. This causes considerable tension with the field of psychiatry which has always seen psychosomatic medicine as a subspecialty of its own discipline. In the article, the development and current position of psychosomatic medicine in German speaking countries other than Germany (Austria, Switzerland and South Tyrol) is presented. While psychosomatic care is currently planned and also partially already executed in Austria, psychosomatic medicine in Switzerland is located with general practitioners on the one hand and consultation-liaison psychiatry on the other. After the radical psychiatric reform of the late 1970s in South Tyrol psychosomatic medicine proved to be a means to remove taboos regarding psychiatric institutions and the mentally ill.

  15. Tending the tensions in co-creation

    DEFF Research Database (Denmark)

    Phillips, Louise Jane

    -creation as a process of mutual learning to be valued at least as much as the outcome AND the neoliberal instrumentalisation of creativity in the service of social innovation and economic growth. The papers build on the themes of Knowledge and Power in Collaborative Research: A Reflexive Approach (Phillips, Kristiansen......Across fields of social practice, the harnessing of creativity in collaborative, dialogic processes of knowledge production is championed as a means to empower participants as agents and generate practice change. ‘Collaboration’, ‘dialogue’ and ‘participation’ have become buzzwords with a taken...... et al, Routledge, 2012), adopting a critical, reflexive approach that interrogates the tensions AND is committed to developing co-creative methods....

  16. Tending the tensions in co-creation

    DEFF Research Database (Denmark)

    Phillips, Professor MSO Louise; Nordentoft, Helle Merete; Pedersen, Lektor Christina Hee

    2013-01-01

    -creation as a process of mutual learning to be valued at least as much as the outcome AND the neoliberal instrumentalisation of creativity in the service of social innovation and economic growth. The papers build on the themes of Knowledge and Power in Collaborative Research: A Reflexive Approach (Phillips, Kristiansen......Across fields of social practice, the harnessing of creativity in collaborative, dialogic processes of knowledge production is championed as a means to empower participants as agents and generate practice change. ‘Collaboration’, ‘dialogue’ and ‘participation’ have become buzzwords with a taken...... et al, Routledge, 2012), adopting a critical, reflexive approach that interrogates the tensions AND is committed to developing co-creative methods....

  17. Effects of tension on vortex-induced vibration (VIV) responses of a long tensioned cylinder in uniform flows

    Science.gov (United States)

    Kang, Ling; Ge, Fei; Wu, Xiaodong; Hong, Youshi

    2017-02-01

    The effects of tension on vortex-induced vibration (VIV) responses for a tension-dominated long cylinder with an aspect ratio of 550 in uniform flows are experimentally investigated in this paper. The results show that elevated tension suppresses fluctuations of maximum displacement with respect to flow velocity and makes chaotic VIV more likely to appear. With respect to periodic VIV, if elevated tension is applied, the dominant vibration frequency in the in-line (IL) direction will switch from a fundamental vibration frequency to twice the value of the fundamental vibration frequency, which results in a ratio of the dominant vibration frequency in the IL direction to that in the cross-flow direction of 2.0. The suppression of the elevated tension in the fluctuation of the maximum displacement causes the axial tension to become an active control parameter for the VIV maximum displacement of a tension-dominated long riser or tether of an engineering structure in deep oceans. However, the axial tension must be optimized before being used since the high dominant vibration frequency due to the elevated tension may unfavorably affect the fatigue life of the riser or tether.

  18. Necessary Tension in Marine Risers (Continued Tension des colonnes montantes en mer (suite

    Directory of Open Access Journals (Sweden)

    Lubinski A.

    2006-11-01

    Full Text Available A simple, first approximation method for calculating the necessary tension in a marine riser, is presented. This article is a practical supplement ta the one published under the same title in the March-April 1977 issue of Revue de l'Institut Français du Pétrole. On présente dans cet article une méthode simple permettant de calculer en première approximation la tension d'une colonne montante en mer. Cet article est le complément pratique de celui publié sous le même titre dans le numéro mars-avril 1977 de la Revue de l'Institut Français du Pétrole.

  19. Damage development in woven fabric composites during tension-tension fatigue

    DEFF Research Database (Denmark)

    Hansen, U.

    1999-01-01

    Impacted woven fabric composites were tested in tension-tension fatigue. In contrast to results from static testing, the effects of low energy impact damage in a fatigue environment were found to be the critical element leading to failure of the specimen. This difference emphasizes the need...... to identify and understand the fatigue damage mechanism. A relatively new non-destructive inspection technique using infrared thermography was found to be a very useful tool in detecting damage initiation and growth. Furthermore, this technique supplies valuable information to the characterization...... of the operating fatigue damage mechanism(s). Fatigue leads to a degradation of material properties. Consequently, in connection with impact induced local stress raisers, fatigue produces continuously changing non-uniform stress fields because of stress redistribution effects. Other models addressing evolution...

  20. VENOUS OCULAR BLOOD FLOW IN NORMAL TENSION AND HIGH TENSION GLAUCOMA

    Directory of Open Access Journals (Sweden)

    Natalia I Kurysheva

    2016-04-01

    Full Text Available Purpose: to study the eye’s venous blood flow and the correlation between clinical data and ocular blood flow in normal tension and high tension open angle glaucoma (POAG. Methods: Color Doppler imaging of arterial and venous blood flow was performed on 78 patients with normal tension glaucoma (NTG, 80 patients with high-pressure glaucoma (HPG and 60 control subjects. The statistical analysis included the calculation of the correlation between clinical data and ocular blood flow parameters, as well as Pearson’s correlation coefficient. The threshold P value for statistical significance was 0.05. Results: Ocular blood flow (both arterial and venous was significantly reduced in NTG and HTG, compared to the control group. While the arterial blood flow reduction was more significant in HTG than in NTG, a decrease in venous blood flow had a higher incidence in NTG. In contrast to the control group, POAG patients showed a correlation between clinical data and venous blood flow. The correlation was higher in NTG patients. Conclusions: The results obtained indicate the potential importance of venous blood flow in glaucoma pathogenesis, especially in NTG.

  1. The Cartesian Diver, Surface Tension and the Cheerios Effect

    Science.gov (United States)

    Chen, Chi-Tung; Lee, Wen-Tang; Kao, Sung-Kai

    2014-01-01

    A Cartesian diver can be used to measure the surface tension of a liquid to a certain extent. The surface tension measurement is related to the two critical pressures at which the diver is about to sink and about to emerge. After sinking because of increasing pressure, the diver is repulsed to the centre of the vessel. After the pressure is…

  2. Surface tension and long range corrections of cylindrical interfaces.

    Science.gov (United States)

    Bourasseau, E; Malfreyt, P; Ghoufi, A

    2015-12-21

    The calculation of the surface tension of curved interfaces has been deeply investigated from molecular simulation during this last past decade. Recently, the thermodynamic Test-Area (TA) approach has been extended to the calculation of surface tension of curved interfaces. In the case of the cylindrical vapour-liquid interfaces of water and Lennard-Jones fluids, it was shown that the surface tension was independent of the curvature of the interface. In addition, the surface tension of the cylindrical interface is higher than that of the planar interface. Molecular simulations of cylindrical interfaces have been so far performed (i) by using a shifted potential, (ii) by means of large cutoff without periodic boundary conditions, or (iii) by ignoring the long range corrections to the surface tension due to the difficulty to estimate them. Indeed, unlike the planar interfaces there are no available operational expressions to consider the tail corrections to the surface tension of cylindrical interfaces. We propose here to develop the long range corrections of the surface tension for cylindrical interfaces by using the non-exponential TA (TA2) method. We also extend the formulation of the Mecke-Winkelmann corrections initially developed for planar surfaces to cylindrical interfaces. We complete this study by the calculation of the surface tension of cylindrical surfaces of liquid tin and copper using the embedded atom model potentials.

  3. Surface Tension Screen Failure Detection Method and Apparatus.

    Science.gov (United States)

    Apparatus for detecting failure of a surface tension screen disposed between a holding chamber and a main chamber of a tank includes a fixture for...Comparison of the measurements provides an assessment of the integrity of the surface tension screen. If the measurements are significantly different

  4. Managing tensions during the innovation journey of high tech startups

    NARCIS (Netherlands)

    Groen, A.J.; Wakkee, I.A.M.; de Weerd-Nederhof, P.C.

    2008-01-01

    Answering the question of how enabling technology-based firms manage tensions in their development process, we focus on tensions related to balancing the need to explore new developments for future performance, with the need to exploit existing capabilities to generate sufficient value in the short

  5. Corrosion resistance of grouted post-tensioning systems : [summary].

    Science.gov (United States)

    2013-08-01

    The increased popularity of post-tensioned bridge construction in the United States has led to concerns about corrosion and its impact on the life cycle of these bridges. Although the vast majority of post-tensioned bridges in the United States have ...

  6. Boundary tension of 2D and 3D Ising models

    NARCIS (Netherlands)

    Zandvliet, Henricus J.W.; Hoede, C.

    A simple route to determine the boundary tension of Ising models is proposed. As pointed out by Onsager, the boundary tension is an important quantity since it vanishes at the critical temperature and can thus be used to determine the critical temperature. Here we derive expressions for the boundary

  7. Surface tension of ionic liquids and ionic liquid solutions.

    Science.gov (United States)

    Tariq, Mohammad; Freire, Mara G; Saramago, Benilde; Coutinho, João A P; Lopes, José N Canongia; Rebelo, Luís Paulo N

    2012-01-21

    Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).

  8. Recognising Value Tensions That Underlie Problems in Inclusive Education

    Science.gov (United States)

    Norwich, Brahm

    2014-01-01

    This paper aims to examine some tensions that underlie inclusive education as regards pupils with disabilities and difficulties. Two key tensions are analysed: difference as enabling-stigmatising (dilemmas of difference) and participation-protection, both of which can lead to significant dilemmas. Berlin's hedgehog-fox distinction about the unity…

  9. Conducting Qualitative Data Analysis: Managing Dynamic Tensions within

    Science.gov (United States)

    Chenail, Ronald J.

    2012-01-01

    In the third of a series of "how-to" essays on conducting qualitative data analysis, Ron Chenail examines the dynamic tensions within the process of qualitative data analysis that qualitative researchers must manage in order to produce credible and creative results. These tensions include (a) the qualities of the data and the qualitative data…

  10. C2-rational cubic spline involving tension parameters

    Indian Academy of Sciences (India)

    http://www.ias.ac.in/article/fulltext/pmsc/110/03/0305-0314. Keywords. Interpolation; rational; spline; tension parameter; monotonicity; convexity; continuity. Abstract. In the present paper, 1-piecewise rational cubic spline function involving tension parameters is considered which produces a monotonic interpolant to a given ...

  11. Strain Capacity of Reinforced Concrete Members Subjected to Uniaxial Tension

    DEFF Research Database (Denmark)

    Hagsten, Lars German; Rasmussen, Annette Beedholm; Fisker, Jakob

    2017-01-01

    The aim of this paper is to set up a method to determine the strain capacity of tension bars of reinforced concrete (RC) subjected to pure tension. Due to the interaction between reinforcement and concrete and due to the presence of cracks, the stresses in both reinforcement and concrete are vary...

  12. Measuring Surface Tension of a Flowing Soap Film

    Science.gov (United States)

    Sane, Aakash; Kim, Ildoo; Mandre, Shreyas

    2016-11-01

    It is well known that surface tension is sensitive to the presence of surfactants and many conventional methods exist to measure it. These techniques measure surface tension either by intruding into the system or by changing its geometry. Use of conventional methods in the case of a flowing soap film is not feasible because intruding the soap film changes surface tension due to Marangoni effect. We present a technique in which we measure the surface tension in situ of a flowing soap film without intruding into the film. A flowing soap film is created by letting soap solution drip between two wires. The interaction of the soap film with the wires causes the wires to deflect which can be measured. Surface tension is calculated using a relation between curvature of the wires and the surface tension. Our measurements indicate that the surface tension of the flowing soap film for our setup is around 0.05 N/m. The nature of this technique makes it favorable for measuring surface tension of flowing soap films whose properties change on intrusion.

  13. FRP tendon anchorage in post-tensioned concrete structures

    DEFF Research Database (Denmark)

    Schmidt, Jacob Wittrup; Täljsten, Björn; Bennitz, Anders

    2008-01-01

    Strengthening of building structures by the use of various external post-tensioning steel tendon systems, is known to be a very efficient method. However, FRP as material in external post-tensioning projects has been investigated during the last decade. The advantages for this material are the high...

  14. Tension band wiring fi xation is associated with good functional ...

    African Journals Online (AJOL)

    Background: Tension band wiring (TBW) is a widely accepted technique for olecranon fractures. Various investigators have reported a significant rate of complications especially hardware prominence. The purpose of this study was to determine the clinical and radiological outcome after tension band wiring of olecranon ...

  15. Managing Tensions Between New and Existing Business Models

    DEFF Research Database (Denmark)

    Sund, Kristian J.; Bogers, Marcel; Villarroel Fernandez, Juan Andrei

    2016-01-01

    Exploring new business models may be a good way to stay competitive, but doing so can create tensions internally, in areas such as organizational structure and competition for resources. Companies exploring business model innovation may not recognize the inevitability of these tensions and thus...

  16. Maximizing aesthetics in lateral-tension abdominoplasty and body lifts.

    Science.gov (United States)

    Lockwood, Ted E

    2004-10-01

    The high-lateral-tension abdominoplasty addresses the practical and theoretic faults of standard abdominoplasty design. Key features include limited direct undermining, increased lateral skin resection with highest-tension wound closure along lateral limbs, two-layer superficial fascial system repair, and significant truncal liposuction when needed. The high-lateral-tension design limits the unfavorable features of standard abdominoplasty and produces balanced natural aesthetic contours. The high-lateral-tension abdominoplasty is the foundation for treatment of more generalized relaxation problems in the circumferential trunk and thighs. For more significant thigh laxity and buttock ptosis, the lateral-tension abdominoplasty is combined with the transverse thigh/buttock lift to produce the lower body lift #2.

  17. Planck and the local Universe: quantifying the tension

    CERN Document Server

    Verde, Licia; Protopapas, Pavlos

    2013-01-01

    We use the latest Planck constraints, and in particular constraints on the derived parameters (Hubble constant and age of the Universe) for the local universe and compare them with local measurements of the same quantities. We propose a way to quantify whether cosmological parameters constraints from two different experiments are in tension or not. Our statistic, T, is an evidence ratio and therefore can be interpreted with the widely used Jeffrey's scale. We find that in the framework of the LCDM model, the Planck inferred two dimensional, joint, posterior distribution for the Hubble constant and age of the Universe is in "strong" tension with the local measurements; the odds being ~ 1:50. We explore several possibilities for explaining this tension and examine the consequences both in terms of unknown errors and deviations from the LCDM model. In some one-parameter LCDM model extensions, tension is reduced whereas in other extensions, tension is instead increased. In particular, small total neutrino masses ...

  18. Tension stimulation drives tissue formation in scaffold-free systems

    Science.gov (United States)

    Lee, Jennifer K.; Huwe, Le W.; Paschos, Nikolaos; Aryaei, Ashkan; Gegg, Courtney A.; Hu, Jerry C.; Athanasiou, Kyriacos A.

    2017-08-01

    Scaffold-free systems have emerged as viable approaches for engineering load-bearing tissues. However, the tensile properties of engineered tissues have remained far below the values for native tissue. Here, by using self-assembled articular cartilage as a model to examine the effects of intermittent and continuous tension stimulation on tissue formation, we show that the application of tension alone, or in combination with matrix remodelling and synthesis agents, leads to neocartilage with tensile properties approaching those of native tissue. Implantation of tension-stimulated tissues results in neotissues that are morphologically reminiscent of native cartilage. We also show that tension stimulation can be translated to a human cell source to generate anisotropic human neocartilage with enhanced tensile properties. Tension stimulation, which results in nearly sixfold improvements in tensile properties over unstimulated controls, may allow the engineering of mechanically robust biological replacements of native tissue.

  19. Design of tension control system for fiber placement equipments

    Directory of Open Access Journals (Sweden)

    Hongjie CHANG

    2015-10-01

    Full Text Available Aiming at the tension control requirements of automatic fiber placement equipments and the problems of traditional tension control system, the hammer tension control system is designed. The hammer is used as a buffer unit in the system, and the tension can be indirectly controlled by the position of the hammer. The system adopts the motion controller as the core element of the system, the AC servo motor as the actuator and the laser position sensor as the detector. The fuzzy PID control algorithm is used for the position control of hammer, which can avoid tension fluctuation by full consideration of the acceleration of the hammer. Prototype experimental results show that this system can avoid the problems of disconnection and relaxation of fiber, meanwhile, the static difference ratio and fluctuation ratio can meet the requirements of engineering practice.

  20. Caracterizacion, identificacion y localizacion de huecos de tension: revision del estado del arte

    National Research Council Canada - National Science Library

    Blanco Solano, Jairo; Petit Suarez, Johann F; Ordonez Plata, Gabriel; Barrera Nunez, Victor

    2012-01-01

    ... el sistema electrico [4, 5] y [6]. Entre las perturbaciones, las de mayor ocurrencia son las interrupciones, las componentes armonicas de tension y corriente, las fluctuaciones de tension, las elevaciones de tension y los huecos de tension [7]. Debido al impacto de los huecos de tension en las cargas industriales, los costos producidos por ...

  1. [Prozac treatment of chronic tension headache].

    Science.gov (United States)

    Voznesenskaia, T G

    1999-01-01

    The paper summarizes the experience of therapy of chronic tension type headache (TTH) with prozac (fluoxetine)--a selective serotonine reuptake inhibitor. The data are presented concerning clinical psychologic examination of 20 outpatients with chronic TTH both before and after therapy with prozac in daily dose of 20 mg during 6 weeks. Background study of the patients revealed severe depression (according to Beck's and SCL-90 scales), anxiety (Spilberger scale) and alexitimia (Toronto scale). Before the treatment, a frequency of TTH attacks was at least four times a week, the intensivity was equal to 8.9 scores according to visual analogous scale. Together with a headache there were psychopathologic and psychoautonomic manifestations. After the course of therapy the headaches disappeared completely in 25%, while considerable improvement was observed in 75% of the patients. The levels of depression, anxiety, somatization have decreased significantly too. Side effects as well as withdrawal syndrome weren't found. The role of depression in formation of chronic TTH, as well as the role of alixetimia in formation of somatizated variation of the depression were considered.

  2. Surface Tension Driven Convection Experiment (STDCE)

    Science.gov (United States)

    Ostrach, S.; Kamotani, Y.

    1996-01-01

    This document reports the results obtained from the Surface Tension Driven Convection Experiment (STDCE) conducted aboard the USML-1 Spacelab in 1992. The experiments used 10 cSt silicone oil placed in an open circular container that was 10 cm wide and 5 cm deep. Thermocapillary flow was induced by using either a cylindrical heater placed along the container centerline or by a CO2 laser. The tests were conducted under various power settings, laser beam diameters, and free surface shapes. Thermistors located at various positions in the test section recorded the temperature of the fluid, heater, walls, and air. An infrared imager was used to measure the free surface temperature. The flow field was studied by flow visualization and the data was analyzed by a PTV technique. The results from the flow visualization and the temperature measurements are compared with the numerical analysis that was conducted in conjunction with the experiment. The compared results include the experimental and numerical velocity vector plots, the streamline plots, the fluid temperature, and the surface temperature distribution.

  3. Ice Accretion with Varying Surface Tension

    Science.gov (United States)

    Bilanin, Alan J.; Anderson, David N.

    1995-01-01

    During an icing encounter of an aircraft in flight, super-cooled water droplets impinging on an airfoil may splash before freezing. This paper reports tests performed to determine if this effect is significant and uses the results to develop an improved scaling method for use in icing test facilities. Simple laboratory tests showed that drops splash on impact at the Reynolds and Weber numbers typical of icing encounters. Further confirmation of droplet splash came from icing tests performed in the NaSA Lewis Icing Research Tunnel (IRT) with a surfactant added to the spray water to reduce the surface tension. The resulting ice shapes were significantly different from those formed when no surfactant was added to the water. These results suggested that the droplet Weber number must be kept constant to properly scale icing test conditions. Finally, the paper presents a Weber-number-based scaling method and reports results from scaling tests in the IRT in which model size was reduced up to a factor of 3. Scale and reference ice shapes are shown which confirm the effectiveness of this new scaling method.

  4. Endothelial monolayer permeability under controlled oxygen tension.

    Science.gov (United States)

    Funamoto, Kenichi; Yoshino, Daisuke; Matsubara, Kento; Zervantonakis, Ioannis K; Funamoto, Kiyoe; Nakayama, Masafumi; Masamune, Jun; Kimura, Yoshitaka; Kamm, Roger D

    2017-06-19

    Endothelial permeability has been extensively investigated in the context of pathologies such as cancer and also in studies of drug delivery from the circulation. Hypoxia is a critical regulator of endothelial cell (EC) behavior and affects the barrier function of endothelial linings, yet its role has been little studied. This paper reveals the effect of hypoxia on the permeability of an EC monolayer by cellular experiments using a microfluidic device and a conventional cell culture dish. Human umbilical vein endothelial cells (HUVECs) were seeded into one microfluidic channel, creating an EC monolayer on each vertical surface of a collagen gel confined to a central chamber. Oxygen tension was regulated to produce normoxic (21% O2) or hypoxic (3% O2) conditions by the supply of gas mixtures of oxygen, carbon dioxide, and nitrogen at predefined ratios into channels fabricated into the device. Permeability of the EC monolayer quantified by analyzing diffusion of fluorescence-labelled dextrans into the collagen gel increases with barrier function loss by 6 hour hypoxic exposure, showing 11-fold and 4-fold increases for 70 kDa and 10 kDa dextrans, respectively, on average. Consistent with this, subsequent immunofluorescent staining and separate western blot analysis of HUVECs on a culture dish demonstrate loose cell-cell adhesion resulting from internalization of VE-cadherin under hypoxia. Thus, hypoxic stress increases endothelial permeability by altering cell-cell junction integrity.

  5. Surface Tension of Biological Polyelectrolyte Solutions.

    Science.gov (United States)

    Okubo; Kobayashi

    1998-09-15

    Surface tensions, gamma, of biological polyelectrolytes in aqueous solutions are studied systematically as possible at the air-water interface by the Wilhelmy method. The polyelectrolytes measured are sodium chondroitin sulfates A (NaCRA) and C (NaCRC), sodium poly-alpha,l-glutamate (NaPGA), poly-l-lysine hydrobromide (PLL . HBr), deoxyribonucleic acid (DNA), lysozyme (LZ), and bovine serum albumin (BSA). Linear-type macroions such as NaCR, NaPGA, PLL . HBr, and DNA have no surface activity in a wide range of polymer concentrations below the critical polymer concentration, m*, and increases as the concentration increases above m*. Surface activity of the undissociated state of macroions is rather high in general. Globule-like macroions such as LZ and BSA show high surface activity at isoelectric point above m* accompanied with orientation of the molecules along the air-water interface. Separation into the hydrophobic and hydrophilic parts at the interface and balancing in their strength are important for appearance of surface activity. Copyright 1998 Academic Press.

  6. Ethnography in community psychology: promises and tensions.

    Science.gov (United States)

    Case, Andrew D; Todd, Nathan R; Kral, Michael J

    2014-09-01

    Community psychology recognizes the need for research methods that illuminate context, culture, diversity, and process. One such method, ethnography, has crossed into multiple disciplines from anthropology, and indeed, community psychologists are becoming community ethnographers. Ethnographic work stands at the intersection of bridging universal questions with the particularities of people and groups bounded in time, geographic location, and social location. Ethnography is thus historical and deeply contextual, enabling a rich, in-depth understanding of communities that is aligned with the values and goals of community psychology. The purpose of this paper is to elucidate the potential of ethnography for community psychology and to encourage its use within the field as a method to capture culture and context, to document process, and to reveal how social change and action occur within and through communities. We discuss the method of ethnography, draw connections to community psychology values and goals, and identify tensions from our experiences doing ethnography. Overall, we assert that ethnography is a method that resonates with community psychology and present this paper as a resource for those interested in using this method in their research or community activism.

  7. Surface tension of Nanofluid-type fuels containing suspended nanomaterials.

    Science.gov (United States)

    Tanvir, Saad; Qiao, Li

    2012-04-18

    The surface tension of ethanol and n-decane based nanofluid fuels containing suspended aluminum (Al), aluminum oxide (Al2O3), and boron (B) nanoparticles as well as dispersible multi-wall carbon nanotubes (MWCNTs) were measured using the pendant drop method by solving the Young-Laplace equation. The effects of nanoparticle concentration, size and the presence of a dispersing agent (surfactant) on surface tension were determined. The results show that surface tension increases both with particle concentration (above a critical concentration) and particle size for all cases. This is because the Van der Waals force between particles at the liquid/gas interface increases surface free energy and thus increases surface tension. At low particle concentrations, however, addition of particles has little influence on surface tension because of the large distance between particles. An exception is when a surfactant was used or when (MWCNTs) was involved. For such cases, the surface tension decreases compared to the pure base fluid. The hypothesis is the polymer groups attached to (MWCNTs) and the surfactant layer between a particle and the surround fluid increases the electrostatic force between particles and thus reduce surface energy and surface tension.

  8. Surface tension of Nanofluid-type fuels containing suspended nanomaterials

    Science.gov (United States)

    2012-01-01

    The surface tension of ethanol and n-decane based nanofluid fuels containing suspended aluminum (Al), aluminum oxide (Al2O3), and boron (B) nanoparticles as well as dispersible multi-wall carbon nanotubes (MWCNTs) were measured using the pendant drop method by solving the Young-Laplace equation. The effects of nanoparticle concentration, size and the presence of a dispersing agent (surfactant) on surface tension were determined. The results show that surface tension increases both with particle concentration (above a critical concentration) and particle size for all cases. This is because the Van der Waals force between particles at the liquid/gas interface increases surface free energy and thus increases surface tension. At low particle concentrations, however, addition of particles has little influence on surface tension because of the large distance between particles. An exception is when a surfactant was used or when (MWCNTs) was involved. For such cases, the surface tension decreases compared to the pure base fluid. The hypothesis is the polymer groups attached to (MWCNTs) and the surfactant layer between a particle and the surround fluid increases the electrostatic force between particles and thus reduce surface energy and surface tension. PMID:22513039

  9. Automated wireless monitoring system for cable tension using smart sensors

    Science.gov (United States)

    Sim, Sung-Han; Li, Jian; Jo, Hongki; Park, Jongwoong; Cho, Soojin; Spencer, Billie F.; Yun, Chung-Bang

    2013-04-01

    Cables are critical load carrying members of cable-stayed bridges; monitoring tension forces of the cables provides valuable information for SHM of the cable-stayed bridges. Monitoring systems for the cable tension can be efficiently realized using wireless smart sensors in conjunction with vibration-based cable tension estimation approaches. This study develops an automated cable tension monitoring system using MEMSIC's Imote2 smart sensors. An embedded data processing strategy is implemented on the Imote2-based wireless sensor network to calculate cable tensions using a vibration-based method, significantly reducing the wireless data transmission and associated power consumption. The autonomous operation of the monitoring system is achieved by AutoMonitor, a high-level coordinator application provided by the Illinois SHM Project Services Toolsuite. The monitoring system also features power harvesting enabled by solar panels attached to each sensor node and AutoMonitor for charging control. The proposed wireless system has been deployed on the Jindo Bridge, a cable-stayed bridge located in South Korea. Tension forces are autonomously monitored for 12 cables in the east, land side of the bridge, proving the validity and potential of the presented tension monitoring system for real-world applications.

  10. Tear fluid-eye drops compatibility assessment using surface tension.

    Science.gov (United States)

    Hotujac Grgurević, Martina; Juretić, Marina; Hafner, Anita; Lovrić, Jasmina; Pepić, Ivan

    2017-02-01

    To evaluate the compatibility of commercially available eye drop surface tension with the tear film physiological range and to characterize commonly used ophthalmic excipients in terms of their surface activity under eye-biorelevant conditions. There are a number of quality requirements for the eye drops (e.g. tonicity, pH, viscosity, refractive index) that needs to comply with the physiological parameters of the eye surface. However, the adjustment of surface tension properties of the eye drops to the normal range of surface tension at the air/tear fluid interface (40-46 mN/m) has received rather less attention thus far. Yet, the surface tension at the air/tear fluid interface is of vital importance for the normal function of the eye surface. The surface tension compatibility of the isotonic aqueous solutions of commonly used ophthalmic excipients as well as 18 approved eye drops with the tear fluid have been evaluated using surface tension method. Each ophthalmic ingredient including the preservatives, solubilizing agents and thickening agents can influence the surface tension of the final formulation. In case of complex ophthalmic formulations one should also consider the possible interactions among excipients and consequent impact on overall surface activity. Out of 18 evaluated eye drops, three samples were within, 12 samples were below and three samples were above the physiological range of the tear fluid surface tension. Our results provide a rationale for clinical studies aiming to assess the correlation between the eye drops surface tension and the tear film (in)stability.

  11. First-principles prediction of liquid/liquid interfacial tension

    DEFF Research Database (Denmark)

    Andersson, Martin Peter; Bennetzen, M.V.; Klamt, A.

    2014-01-01

    The interfacial tension between two liquids is the free energy per unit surface area required to create that interface. Interfacial tension is a determining factor for two-phase liquid behavior in a wide variety of systems ranging from water flooding in oil recovery processes and remediation...... of groundwater aquifers contaminated by chlorinated solvents to drug delivery and a host of industrial processes. Here, we present a model for predicting interfacial tension from first principles using density functional theory calculations. Our model requires no experimental input and is applicable to liquid...

  12. Bending Under Tension Test with Direct Friction Measurement

    DEFF Research Database (Denmark)

    Andreasen, Jan Lasson; Olsson, David Dam; Chodnikiewicz, K.

    2004-01-01

    A special BUT-transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool-pin under constant back tension. The front tension, back tension and torque on the tool-pin are all measured directly, thus...... enabling accurate measurement of friction and direct determination of lubricant film breakdown for varying normal pressure, sliding speed, tool radius and tool preheat temperature. The transducer is applied in an experimental investigation focusing on limits of lubrication in drawing of stainless steel...

  13. Climate-derived tensions in Arctic security.

    Energy Technology Data Exchange (ETDEWEB)

    Backus, George A.; Strickland, James Hassler

    2008-09-01

    Globally, there is no lack of security threats. Many of them demand priority engagement and there can never be adequate resources to address all threats. In this context, climate is just another aspect of global security and the Arctic just another region. In light of physical and budgetary constraints, new security needs must be integrated and prioritized with existing ones. This discussion approaches the security impacts of climate from that perspective, starting with the broad security picture and establishing how climate may affect it. This method provides a different view from one that starts with climate and projects it, in isolation, as the source of a hypothetical security burden. That said, the Arctic does appear to present high-priority security challenges. Uncertainty in the timing of an ice-free Arctic affects how quickly it will become a security priority. Uncertainty in the emergent extreme and variable weather conditions will determine the difficulty (cost) of maintaining adequate security (order) in the area. The resolution of sovereignty boundaries affects the ability to enforce security measures, and the U.S. will most probably need a military presence to back-up negotiated sovereignty agreements. Without additional global warming, technology already allows the Arctic to become a strategic link in the global supply chain, possibly with northern Russia as its main hub. Additionally, the multinational corporations reaping the economic bounty may affect security tensions more than nation-states themselves. Countries will depend ever more heavily on the global supply chains. China has particular needs to protect its trade flows. In matters of security, nation-state and multinational-corporate interests will become heavily intertwined.

  14. Differences of optic disc appearance between normal tension and high tension glaucoma patients

    Directory of Open Access Journals (Sweden)

    Stojčić Milan

    2011-01-01

    Full Text Available Introduction. The term glaucoma is used to cover a wide range of diseases, whose main feature is optic neuropathy. According to the level of intraocular pressure (IOP, the open angle glaucoma is arbitrarily divided into high tension glaucoma (HTG and normal tension glaucoma (NTG. Objective. The aim of this study was to investigate the differences of optic disc cup appearance between patients with NTG and HTG. Methods. Prospective study included 30 patients (60 eyes with NTG and 30 patients (60 eyes with HTG. IOP was measured by Goldmann applanation tonometry. Examination of optic disc head was performed by indirect ophthalmoscopy with Volk 90 D superfield lens through a dilated pupil to observe qualitative and quantitative parameters. Visual fields were examined in all patients with the Octopus program G1, full threshold strategy (Octopus 500 EZ, Interzeag, Switzerland. Results. Vertical form of optic disc cup was present in 11 eyes with NTG (18.3% and three eyes with HTG (5% (p<0.05. A disc with localized tissue loss (polar notching on the inferior pole was observed in eight eyes with NTG (13.3% and in one eye with HTG (1.7% (p<0.01. Uniformly enlarged, round cup was more frequent in patients with HTG than NTG: 93.3% and 68.3% respectively (p<0.05. Conclusion. The perceived differences indicate a complex multifactorial nature of glaucoma disease and a possible existence of two pathophysiological ways of optic disc changes within the same basic disease.

  15. [Comparison of normal tension and high tension glaucoma patients (corrected) according to age and sex].

    Science.gov (United States)

    Stojčić, Milan; Hentova-Senćanić, Paraskeva; Stojčić, Biljana; Senćanić, Ivan

    2012-01-01

    According to the level of intraocular pressure (IOP), open angle glaucoma is divided into high tension glaucoma (HTG) and normal tension glaucoma (NTG). To determine if there are differences in the distribution of patients by age and sex between NTG and HTG. Our prospective study included 30 patients with NTG and 30 with HTG. A complete eye examination was performed. The examination included measuring of intraocular pressure by Goldmann applanation tonometry, examination of optic disc head by indirect ophthalmoscopy with Volk 90 D lens and visual field examination using the Octopus program. The average damage of visual field in the group of patients with NTG was 8.14 +/- 4.43 dB, while in the group with HTG it was 7.40 +/- 2.84 dB (p > 0.05). The average age of the group of patients with NTG was 66 +/- 11.58 years, while among those with HTG the average age was 59.7 +/- 11.63 years (p HTG there were more men than women, but without statistically significant difference between the tested groups (chi2 = 1.851; p > 0.05). Open angle glaucoma is a disease of elderly population. According to our results, risk factors for this disease can be age and sex. NTG is more frequently present than HTG among elderly population and females.

  16. Comparison of OCT and HRT findings among normal, normal tension glaucoma, and high tension glaucoma.

    Science.gov (United States)

    Shin, In Ha; Kang, Sung Yong; Hong, Samin; Kim, Seung Kab; Seong, Gong Je; Tak, Ma Kyung; Kim, Chan Yun

    2008-12-01

    To evaluate the relationship between optic disc and retinal nerve fiber layer (RNFL) measurements obtained with the optical coherence tomography (OCT) and the Heidelberg retina topography (HRT) in normal, normal tension glaucoma (NTG), and high tension glaucoma (HTG). Normal, NTG and HTG subjects who met inclusion and exclusion criteria were evaluated retrospectively. One hundred seventy eyes of 170 patients (30 normal, 40 NTG, and 100 HTG) were enrolled. Complete ophthalmologic examination, HRT, OCT, and automated perimetry were evaluated. Disc area, cup area and cup/disc area ratio measured with HRT were significantly different between NTG and HTG (all p HTG (84.97+/-24.20 micrometer vs. 73.53+/-27.17 micrometer, p = 0.037). Four quadrant RNFL thickness measurements were not significantly different between NTG and HTG (all p > 0.05). Mean deviation and corrected pattern standard deviation measured by automated perimetry was significantly correlated with mean and inferior RNFL thickness in both NTG and HTG (Pearson's r, p HTG than NTG (35.21+/-18.92 vs. 31.30+/-10.91, p = 0.004). These findings suggest that optic disc and RNFL damage pattern in NTG may be different from those of HTG.

  17. Do 'sliders' slide and 'tensioners' tension? An analysis of neurodynamic techniques and considerations regarding their application.

    Science.gov (United States)

    Coppieters, Michel W; Butler, David S

    2008-06-01

    Despite the high prevalence of carpal tunnel syndrome and cubital tunnel syndrome, the quality of clinical practice guidelines is poor and non-invasive treatment modalities are often poorly documented. The aim of this cadaveric biomechanical study was to measure longitudinal excursion and strain in the median and ulnar nerve at the wrist and proximal to the elbow during different types of nerve gliding exercises. The results confirmed the clinical assumption that 'sliding techniques' result in a substantially larger excursion of the nerve than 'tensioning techniques' (e.g., median nerve at the wrist: 12.6 versus 6.1mm, ulnar nerve at the elbow: 8.3 versus 3.8mm), and that this larger excursion is associated with a much smaller change in strain (e.g., median nerve at the wrist: 0.8% (sliding) versus 6.8% (tensioning)). The findings demonstrate that different types of nerve gliding exercises have largely different mechanical effects on the peripheral nervous system. Hence different types of techniques should not be regarded as part of a homogenous group of exercises as they may influence neuropathological processes differently. The findings of this study and a discussion of possible beneficial effects of nerve gliding exercises on neuropathological processes may assist the clinician in selecting more appropriate nerve gliding exercises in the conservative and post-operative management of common neuropathies.

  18. The effects of ambient impurities on the surface tension

    Directory of Open Access Journals (Sweden)

    Ponce-Torres A.

    2016-01-01

    Full Text Available A liquid bridge is a liquid column held captive between two coaxial and parallel solid disks. It is an excellent test bench where measuring the surface tension. In this paper, we used this fluid configuration to examine experimentally the effects of ambient impurities on the surface tension over time. For this purpose, the liquid bridge equilibrium shape was analyzed when the liquid bridge was surrounded by three environments: the uncontrolled ambient, and both air and argon encapsulated in a small glass cover. Ambient contamination produced a sharp decrease of the surface tension of ultra-pure water. The presence of an anionic surfactant in the free surface of an aqueous solution did not inhibit the action of impurities coming from the ambient. Impurities can influence the dynamical behavior of the free surface in flows dominated by the surface tension. Therefore, a careful control of that influence can be crucial in many applications of fluid mechanics.

  19. Surface Tension Gradients Induced by Temperature: The Thermal Marangoni Effect

    Science.gov (United States)

    Gugliotti, Marcos; Baptisto, Mauricio S.; Politi, Mario J.

    2004-01-01

    Surface tensions gradients were generated in a thin liquid film because of the local increase in temperature, for demonstration purposes. This is performed using a simple experiment and allows different alternatives for heat generation to be used.

  20. Quantifying the BICEP2-Planck tension over gravitational waves.

    Science.gov (United States)

    Smith, Kendrick M; Dvorkin, Cora; Boyle, Latham; Turok, Neil; Halpern, Mark; Hinshaw, Gary; Gold, Ben

    2014-07-18

    The recent BICEP2 measurement of B-mode polarization in the cosmic microwave background (r = 0.2(-0.05)(+0.07)), a possible indication of primordial gravity waves, appears to be in tension with the upper limit from WMAP (r < 0.13 at 95% C.L.) and Planck (r < 0.11 at 95% C.L.). We carefully quantify the level of tension and show that it is very significant (around 0.1% unlikely) when the observed deficit of large-scale temperature power is taken into account. We show that measurements of TE and EE power spectra in the near future will discriminate between the hypotheses that this tension is either a statistical fluke or a sign of new physics. We also discuss extensions of the standard cosmological model that relieve the tension and some novel ways to constrain them.

  1. Corrosion characteristics of unprotected post-tensioning strands under stress.

    Science.gov (United States)

    2014-05-01

    An investigation was conducted to determine the effect of stress condition : and environmental exposure on corrosion of post-tensioned strands during ungrouted periods. : Exposures for periods of up to 4 weeks of stressed, as-received strand placed i...

  2. System and Method for Tensioning a Robotically Actuated Tendon

    Science.gov (United States)

    Reiland, Matthew J. (Inventor); Diftler, Myron A. (Inventor)

    2013-01-01

    A tendon tensioning system includes a tendon having a proximal end and a distal end, an actuator, and a motor controller. The actuator may include a drive screw and a motor, and may be coupled with the proximal end of the tendon and configured to apply a tension through the tendon in response to an electrical current. The motor controller may be electrically coupled with the actuator, and configured to provide an electrical current having a first amplitude to the actuator until a stall tension is achieved through the tendon; provide a pulse current to the actuator following the achievement of the stall tension, where the amplitude of the pulse current is greater than the first amplitude, and return the motor to a steady state holding current following the conclusion of the pulse current.

  3. Temperature compensation of the SAW yarn tension sensor.

    Science.gov (United States)

    Lu, Wenke; Feng, Yang; Zhu, Changchun; Zheng, Jianli

    2017-04-01

    The objective of this research was to investigate the possibility of the temperature compensation for the surface acoustic wave (SAW) yarn tension sensor. The motivation for this work was prompted by the oscillation frequency of the SAW yarn tension sensor varying with the temperature. In this paper, we deduce the functional relationship between the temperature variation and the oscillation frequency shift caused by the temperature. This functional relationship and the temperature sensor are used to get the oscillation frequency shift caused by the temperature, so that we can use the oscillation frequency shift caused by the temperature to implement the temperature compensation of the SAW yarn tension sensor. In this paper, we also get the relative error of the temperature compensation. The theoretical and experimental results confirm that this temperature compensation method can implement the temperature compensation of the SAW yarn tension sensor. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Modeling and characterization of strengthened concrete tension members

    DEFF Research Database (Denmark)

    Hansen, Christian Skodborg; Stang, Henrik

    2011-01-01

    The structural potential for cracking of externally strengthened concrete tension members, can be predicted with three parameters, describing the structural cracking potential based on fracture mechanical properties of the of concrete and interface between concrete and strengthening medium...

  5. Tensioned Rollable Ultra-light Solar array System (TRUSS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TRUSS is a structurally efficient solar array concept that utilizes a TRAC rollable boom and tension-stiffened structure to exceed the program requirements for very...

  6. Bathing Trunk Inevus Associated with Neurofibromatosis and Raised Intracranial Tension

    Directory of Open Access Journals (Sweden)

    T.V.S Arya

    1988-01-01

    Full Text Available A 17-year-old boy had bathing trunk nevus with multiple large neurofibromata on the nevus and raised intracranial tension presenting with bilateral papilloedema and pyramidal tract sings. This combination, of features is extremely rare.

  7. Practitioners conducting educational design research: Tales of tension and triumph

    NARCIS (Netherlands)

    McKenney, Susan

    2014-01-01

    McKenney, S. (2013). Practitioners conducting educational design research: Tales of tension and triumph. Keynote address at the annual meeting of the European Association for Practitioner Research on Improving Learning. November 27-29, Biel/Bienne, Switzerland.

  8. Partial surface tension of components of a solution.

    Science.gov (United States)

    Kaptay, George

    2015-06-02

    First, extending the boundaries of the thermodynamic framework of Gibbs, a definition of the partial surface tension of a component of a solution is provided. Second, a formal thermodynamic relationship is established between the partial surface tensions of different components of a solution and the surface tension of the same solution. Third, the partial surface tension of a component is derived as a function of bulk and surface concentrations of the given component, using general equations for the thermodynamics of solutions. The above equations are derived without an initial knowledge of the Gibbs adsorption equation and without imposing any restrictions on the thickness or structure of the surface region of the solution. Only surface tension and the composition of the surface region are used as independent thermodynamic parameters, similar to Gibbs, who used only the surface tension of the solution and the relative surface excesses of the components. The final result formally coincides with the historical Butler equation (1932), but without its theoretical restrictions. (Butler used too many unnecessary model restrictions during his work: he started from the Gibbs adsorption equation, and he assumed the existence of a surface monolayer.) Thus, the renovated Butler equation has gained general validity in this article. It was applied to derive both the Langmuir equation and the Gibbs adsorption equation, but the latter two equations do not follow from each other. Thus, it is shown that logically (not historically) the renovated Butler equation is a root equation for surface tension and the adsorption of solutions. It can be used to perform calculations for specific systems if the corresponding specific experimental data/models are loaded into it. In this case, both surface tension and surface composition can be calculated from the renovated Butler equation, which cannot be done using the Gibbs adsorption equation alone.

  9. Observer-based fault diagnosis for trucks belt tensioner

    OpenAIRE

    Dubuc, Donatien; Sename, Olivier; Bresch-Pietri, Delphine; Gauthier, Christophe

    2017-01-01

    International audience; This paper deals with the monitoring of a serpentine belt tensioner performance, a critical automotive engine component guaranteeing the cooling system efficiency. A belt tensioner fault will affect the transmission, deteriorate the water pump efficiency, and eventually, lead the engine to stall. Monitoring this component is thus a key to design predictive or corrective maintenance. In this paper, we propose to estimate a parameter which is shown to be characteristic o...

  10. The effects of ambient impurities on the surface tension

    OpenAIRE

    Ponce-Torres A.; Vega E. J.

    2016-01-01

    A liquid bridge is a liquid column held captive between two coaxial and parallel solid disks. It is an excellent test bench where measuring the surface tension. In this paper, we used this fluid configuration to examine experimentally the effects of ambient impurities on the surface tension over time. For this purpose, the liquid bridge equilibrium shape was analyzed when the liquid bridge was surrounded by three environments: the uncontrolled ambient, and both air and argon encapsulated in a...

  11. Examination of Post-Tensioned Steel Bridges in Indiana

    OpenAIRE

    Wu, Hung-I; Bowman, Mark D.

    2000-01-01

    The purpose of the research study is to conduct an investigation to understand the performance of a relatively new type of bridge construction that involves prestressed (post-tensioned) steel-concrete composite bridge members. Strictly speaking, the technical and economical advantages of this type of structure have been understood for several decades. However, the application of this concept to practice is still very limited due to difficulties associated with the post-tensioning anchorage. T...

  12. Human uterine wall tension trajectories and the onset of parturition.

    Directory of Open Access Journals (Sweden)

    Peter Sokolowski

    Full Text Available Uterine wall tension is thought to be an important determinant of the onset of labor in pregnant women. We characterize human uterine wall tension using ultrasound from the second trimester of pregnancy until parturition and compare preterm, term and twin pregnancies. A total of 320 pregnant women were followed from first antenatal visit to delivery during the period 2000-2004 at the John Hunter Hospital, NSW, Australia. The uterine wall thickness, length, anterior-posterior diameter and transverse diameter were determined by serial ultrasounds. Subjects were divided into three groups: women with singleton pregnancies and spontaneous labor onset, either preterm or term and women with twin pregnancies. Intrauterine pressure results from the literature were combined with our data to form trajectories for uterine wall thickness, volume and tension for each woman using the prolate ellipsoid method and the groups were compared at 20, 25 and 30 weeks gestation. Uterine wall tension followed an exponential curve, with results increasing throughout pregnancy with the site of maximum tension on the anterior wall. For those delivering preterm, uterine wall thickness was increased P < 0.05 compared with term. For twin pregnancies intrauterine volume was increased compared to singletons (P < 0.001, but wall thickness was not. There was no evidence for increased tension in those delivering preterm or those with twin gestations. These data are not consistent with a role for high uterine wall tension as a causal factor in preterm spontaneous labor in singleton or twin gestations. It seems likely that hormonal differences in multiple gestations are responsible for increased rates of preterm birth in this group rather than increased tension.

  13. Surface tension and related thermodynamic quantities of aqueous electrolyte solutions

    CERN Document Server

    Matubayasi, Norihiro

    2013-01-01

    Surface tension provides a thermodynamic avenue for analyzing systems in equilibrium and formulating phenomenological explanations for the behavior of constituent molecules in the surface region. While there are extensive experimental observations and established ideas regarding desorption of ions from the surfaces of aqueous salt solutions, a more successful discussion of the theory has recently emerged, which allows the quantitative calculation of the distribution of ions in the surface region. Surface Tension and Related Thermodynamic Quantities of Aqueous Electrolyte Solutions provides a d

  14. Advances in the construction techniques of AC induction motors; Avances en las tecnicas de construccion de motores de induccion de CA

    Energy Technology Data Exchange (ETDEWEB)

    Malinowski, John; McCormick, Jim; Dunn, Kevin [Institute of Electrical and Electronics Engineers (IEEE) (United States)

    2006-01-15

    The necessary design and production techniques for the motors of special efficiency (premium) are reviewed and the new investigations that are been made to increase its efficiency are presented, including better slots design for steel sheet plate and for copper rotors fused to pressure. The history of the special motors of special efficiency and of the corresponding Norms is discussed. The of IEEE Standards are compared to each other, those of the Canadian Standards Association (CSA), those of the International Electrotechnical Commission (IEC) and those of the Japanese Electrotechnical Commission (JEC). Also are described groups of losses in motors as well as the way they affect the efficiency. [Spanish] Se resenan las tecnicas de diseno y produccion necesarias para los motores de eficiencia especial (Premium), y se presentan las nuevas investigaciones que se hacen para aumentar su eficiencia, incluyendo mejores disenos de ranuras para laminas de acero y de rotores de cobre fundido a presion. Se revisa la historia de los motores de eficiencia especiales y de las Normas correspondientes. Se comparan entre si las Normas de IEEE, las de Canadian Standards Association (CSA), las de la Comision Internacional Electrotecnica (IEC) y las de la Comision Electrotecnica Japonesa (JEC). Tambien se describen grupos de perdidas en motor, asi como la forma en que afectan a la eficiencia.

  15. LA FLUORESCENZA A RAGGI X PORTATILE UNA TECNICA DI INDAGINE DIAGNOSTICA TRA LE PIÙ UTILIZZATE NELL’AMBITO DELLA CONSERVAZIONE MUSEALE

    Directory of Open Access Journals (Sweden)

    Daniele Pipitone

    2012-04-01

    Full Text Available

    La tecnica della Fluorescenza a Raggi X (X-Ray Fluorescence XRF è una delle tecniche maggiormente utilizzatenei musei e nei laboratori scientifi ci di supporto alla ricerca e alla conservazione museale, in quanto non invasivae facilmente trasportabile. È utilizzata per lo studio dei materiali componenti gli oggetti di interesse storicoartisticoed archeologico per ottenere delle prime informazioni all'inizio di un intervento di conservazione.

     

    X-Ray Fluorescence

    The X-Ray Fluorescence (XRF is one of the techniques most usedin the museum scientifi c laboratories and in the other research laboratoriesto support museum conservation and restoration. It isnon invasive and easy transportable. It is utilised for the study ofelemental composition of material that compose objects of hystorical,artistic and archeological interest and allows to obtain fi rstinformations in restoration or conservation interventions.In this paper are described main features of this technique amongthe most commonly used in science conservation particularly for theanalysis of painting, fresques, and others polycrome art works.

  16. Patients with tension-type headaches feel stigmatized

    Directory of Open Access Journals (Sweden)

    Sanjay Prakash

    2016-01-01

    Full Text Available The author, a sufferer of tension-type headache (TTH, believes that the word "tension" in "tension-type headache" carries a social stigma and that patients do not accept a diagnosis of TTH readily. TTH is the most common primary headache disorder. The disability of TTH as a burden of society is greater than that of migraine. Absenteeism because of TTH is higher than that due to migraine. However, patients with TTH do not go for consultation. Even the prevalence of new daily persistent headache (NDPH is 12 times higher at the headache clinic than that of chronic TTH (CTTH. These points hint that TTH patients probably do not want to visit the clinic. The author believes that it could be because of the stigma attached to "tension." Herein, the author has noted the first responses given by 50 consecutive patients with TTH when they were told that they had been suffering from TTH. The first answer of 64% of patients with TTH was "I do not have any tension/stress ." This denial is similar to the denial declared by patients with depression. Depression and tension are similar in the sense that both are considered as a signs of personal weakness. Such a preconception in the society creates a stigma, and patients deny the diagnosis, conceal symptoms, and become reluctant to seek help and treatment.

  17. Water surface tension modulates the swarming mechanics of Bacillus subtilis.

    Science.gov (United States)

    Ke, Wan-Ju; Hsueh, Yi-Huang; Cheng, Yu-Chieh; Wu, Chih-Ching; Liu, Shih-Tung

    2015-01-01

    Many Bacillus subtilis strains swarm, often forming colonies with tendrils on agar medium. It is known that B. subtilis swarming requires flagella and a biosurfactant, surfactin. In this study, we find that water surface tension plays a role in swarming dynamics. B. subtilis colonies were found to contain water, and when a low amount of surfactin is produced, the water surface tension of the colony restricts expansion, causing bacterial density to rise. The increased density induces a quorum sensing response that leads to heightened production of surfactin, which then weakens water surface tension to allow colony expansion. When the barrier formed by water surface tension is breached at a specific location, a stream of bacteria swarms out of the colony to form a tendril. If a B. subtilis strain produces surfactin at levels that can substantially weaken the overall water surface tension of the colony, water floods the agar surface in a thin layer, within which bacteria swarm and migrate rapidly. This study sheds light on the role of water surface tension in regulating B. subtilis swarming, and provides insight into the mechanisms underlying swarming initiation and tendril formation.

  18. Yield stress and elasticity influence on surface tension measurements.

    Science.gov (United States)

    Jørgensen, Loren; Le Merrer, Marie; Delanoë-Ayari, Hélène; Barentin, Catherine

    2015-07-07

    We have performed surface tension measurements on carbopol gels of different concentrations and yield stresses. Our setup, based on the force exerted by a capillary bridge on two parallel plates, allows us to measure an apparent surface tension of the complex fluid and to investigate the influence of flow history. More precisely the apparent surface tension measured after stretching the bridge is always higher than after compressing it. The difference between the two values is due to the existence of a yield stress in the fluid. The experimental observations are successfully reproduced with a simple elasto-plastic model. The shape of successive stretching-compression cycles can be described by taking into account the yield stress and the elasticity of the gel. We show that the surface tension γLV of yield stress fluids is the mean of the apparent surface tension values only if the elastic modulus is high compared to the yield stress. This work highlights that measurements of thermodynamic quantities are challenged by the fluid out-of-equilibrium state implied by jamming, even at small scales where the shape of the bridge is driven by surface energy. Therefore setups allowing for deformation in opposite directions are relevant for surface tension measurements on yield stress fluids.

  19. Pulmonary surfactant surface tension influences alveolar capillary shape and oxygenation.

    Science.gov (United States)

    Ikegami, Machiko; Weaver, Timothy E; Grant, Shawn N; Whitsett, Jeffrey A

    2009-10-01

    Alveolar capillaries are located in close proximity to the alveolar epithelium and beneath the surfactant film. We hypothesized that the shape of alveolar capillaries and accompanying oxygenation are influenced by surfactant surface tension in the alveolus. To prove our hypothesis, surfactant surface tension was regulated by conditional expression of surfactant protein (SP)-B in Sftpb(-/-) mice, thereby inhibiting surface tension-lowering properties of surfactant in vivo within 24 hours after depletion of Sftpb. Minimum surface tension of isolated surfactant was increased and oxygen saturation was significantly reduced after 2 days of SP-B deficiency in association with deformation of alveolar capillaries. Intravascularly injected 3.2-mum-diameter microbeads through jugular vein were retained within narrowed pulmonary capillaries after reduction of SP-B. Ultrastructure studies demonstrated that the capillary protrusion typical of the normal alveolar-capillary unit was reduced in size, consistent with altered pulmonary blood flow. Pulmonary hypertension and intrapulmonary shunting are commonly associated with surfactant deficiency and dysfunction in neonates and adults with respiratory distress syndromes. Increased surfactant surface tension caused by reduction in SP-B induced narrowing of alveolar capillaries and oxygen desaturation, demonstrating an important role of surface tension-lowering properties of surfactant in the regulation of pulmonary vascular perfusion.

  20. Tension-Enhanced Hydrogen Evolution Reaction on Vanadium Disulfide Monolayer

    Science.gov (United States)

    Pan, Hui

    2016-02-01

    Water electrolysis is an efficient way for hydrogen production. Finding efficient, cheap, and eco-friendly electrocatalysts is essential to the development of this technology. In the work, we present a first-principles study on the effects of tension on the hydrogen evolution reaction of a novel electrocatalyst, vanadium disulfide (VS2) monolayer. Two electrocatalytic processes, individual and collective processes, are investigated. We show that the catalytic ability of VS2 monolayer at higher hydrogen coverage can be efficiently improved by escalating tension. We find that the individual process is easier to occur in a wide range of hydrogen coverage and the collective process is possible at a certain hydrogen coverage under the same tension. The best hydrogen evolution reaction with near-zero Gibbs free energy can be achieved by tuning tension. We further show that the change of catalytic activity with tension and hydrogen coverage is induced by the change of free carrier density around the Fermi level, that is, higher carrier density, better catalytic performance. It is expected that tension can be a simple way to improve the catalytic activity, leading to the design of novel electrocatalysts for efficient hydrogen production from water electrolysis.

  1. Voltage stability evaluation facing small disturbances by means of the modal analysis technique; Evaluacion de la estabilidad de voltaje ante disturbios pequenos mediante la tecnica de analisis modal

    Energy Technology Data Exchange (ETDEWEB)

    Leon Rodriguez, Daniel

    2000-12-15

    . Estos aspectos han provocado que dichos sistemas operen con margenes de seguridad mas limitados y que su estabilidad tenga que ser analizada de una manera confiable y precisa. Tomando en cuenta los aspectos arriba mencionados, a medida que los sistemas electricos han tenido que operar en condiciones mas forzadas para satisfacer la demanda de la carga, los problemas de estabilidad de voltaje se han presentado con mayor frecuencia provocando serios disturbios y en algunos casos, hasta apagones totales. Ante la ocurrencia de estos problemas, el analisis de establidad de voltaje ha cobrado cada vez mayor importancia en los estudios de las companias suministradoras de energia electrica provocando con esto que se destinen mayores recursos para la investigacion de este fenomeno con el proposito de comprenderlo y desarrollar tecnicas y herramientas que permitan estudiarlo de una manera mas completa. El analisis modal es una de las mas recientes tecnicas en estado estable la cual, desde su aparicion ha tenido un gran auge debido a la valios y rapida informacion que proporciona, ademas de su facilidad de implementacion y el poco esfuerzo computacional que requiere. En este trabajo se realiza la evaluacion de la estabilidad de voltaje d eun sistema electrico real aplicando de manera conjunta la tecnica de analisis modal con otras tecnicas convencionales como las curvas P-V y V-Q. Se ilustra tambien la manera en que la distinta informacion obtenida de estas tecnicas se complementa para lograr un estudio de estabilidad de voltaje mas completo y representativo. Ademas de analizar la estabilidad de voltaje para las condiciones normales de operacion (caso base), se evaluan tambien tres distintas alternativas de compensacion reactiva capacitiva con objeto de mejorar el margen o distancia a la inestabilidad de voltaje del sistema. Los resultado obtenidos con cada una de las opciones de compensacion son analizados y comparados entre si para finalmente proponer la alternativa que presente

  2. Perceiving the affordance of string tension for power strokes in badminton: expertise allows effective use of all string tensions.

    Science.gov (United States)

    Zhu, Qin

    2013-01-01

    Affordances mean opportunities for action. These affordances are important for sports performance and relevant to the abilities developed by skilled athletes. In racquet sports such as badminton, different players prefer widely different string tension because it is believed to provide opportunities for effective strokes. The current study examined whether badminton players can perceive the affordance of string tension for power strokes and whether the perception of affordance itself changed as a function of skill level. The results showed that string tension constrained the striking performance of both novice and recreational players, but not of expert players. When perceptual capability was assessed, perceptual mode did not affect perception of the optimal string tension. Skilled players successfully perceived the affordance of string tension, but only experts were concerned about saving energy. Our findings demonstrated that perception of the affordance of string tension in badminton was determined by action abilities. Furthermore, experts could adjust the action to maintain a superior level of performance based on the perception of affordance.

  3. Crystallographic Analysis of Fatigue Crack Initiation Behavior in Coarse-Grained Magnesium Alloy Under Tension-Tension Loading Cycles

    Science.gov (United States)

    Tamada, Kazuhiro; Kakiuchi, Toshifumi; Uematsu, Yoshihiko

    2017-07-01

    Plane bending fatigue tests are conducted to investigate fatigue crack initiation mechanisms in coarse-grained magnesium alloy, AZ31, under the stress ratios R = -1 and 0.1. The initial crystallographic structures are analyzed by an electron backscatter diffraction method. The slip or twin operation during fatigue tests is identified from the line angle analyses based on Euler angles of the grains. Under the stress ratio R = -1, relatively thick tension twin bands are formed in coarse grains. Subsequently, compression twin or secondary pyramidal slip operates within the tension twin band, resulting in the fatigue crack initiation. On the other hand, under R = 0.1 with tension-tension loading cycles, twin bands are formed on the specimen surface, but the angles of those bands do not correspond to tension twins. Misorientation analyses of c-axes in the matrix grain and twin band reveal that double twins are activated. Under R = 0.1, fatigue crack initiates along the double twin boundaries. The different manners of fatigue crack initiation at R = -1 and 0.1 are related to the asymmetricity of twining under tension and compression loadings. The fatigue strengths under different stress ratios cannot be estimated by the modified Goodman diagram due to the effect of stress ratio on crack initiation mechanisms.

  4. Posterior displacement of the lamina cribrosa in normal-tension and high-tension glaucoma.

    Science.gov (United States)

    Li, Lüe; Bian, Ailing; Cheng, Gangwei; Zhou, Qi

    2016-09-01

    To compare the in vivo lamina cribrosa position in patients with normal-tension glaucoma (NTG) and high-tension glaucoma (HTG). The comparative cross-sectional study included three age- and sex-matched groups: 26 eyes of 26 NTG patients, 26 eyes of 26 HTG patients and 25 eyes of 25 healthy controls. Serial horizontal B-scan images of the optic nerve head were obtained from each eye using enhanced depth imaging optical coherence tomography. Mean and maximum lamina cribrosa depths were measured in 11 equally spaced horizontal B-scans. Statistical analysis was conducted to compare lamina cribrosa depth among the three groups and to correlate lamina cribrosa depth with age, retinal nerve fibre layer (RNFL) thickness and visual field (VF) mean deviation (MD). The area under the receiver operating characteristic curve (AUC) for lamina cribrosa depth was calculated. Mean and maximum lamina cribrosa depths were significantly greater in HTG than in NTG eyes, and in NTG than in normal eyes in all 11 scans (all p HTG eyes (0.977 and 0.988, respectively) were significantly greater than those in NTG eyes (0.735 and 0.765, respectively; both p HTG eyes; however, the same association was not found in NTG or controls. Neither RNFL thickness nor VF MD was significantly correlated with lamina cribrosa depth in each group. The lamina cribrosa is more posteriorly located in HTG than in NTG eyes, as well as in NTG eyes compared with healthy controls. The lamina cribrosa depth can help differentiate HTG from normal eyes, but it does not reach a good level of diagnostic accuracy for detecting NTG. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

  5. Morphological and functional differences between normal-tension and high-tension glaucoma.

    Science.gov (United States)

    Häntzschel, Janek; Terai, Naim; Sorgenfrei, Friederike; Haustein, Michael; Pillunat, Karin; Pillunat, Lutz E

    2013-08-01

    To compare visual field (VF) and nerve fibre loss in patients with normal-tension (NTG) and high-tension glaucoma (HTG) at an equal level of glaucomatous structural damage of the optic nerve head (ONH). In a retrospective, pair-matched, comparative study, 126 eyes with NTG and 126 eyes with HTG were matched according to the same glaucomatous ONH damage based on rim volume, rim area and disc size measured by the Heidelberg Retina Tomograph (HRT III). Visual field by Humphrey perimetry and nerve fibre layer thickness measured by scanning laser polarimetry (GdxVCC) were compared between both groups. Based on the HRT, NTG and HTG displayed comparable structural damage of the ONH without a statistically significant difference between both groups (mean, NTG/HTG: disc area 2.32/2.32 mm², p =0.342; rim area 1.03/1.00 mm², p = 0.279; rim volume 0.2/0.19 mm³; p = 0.274). Eyes with NTG had significantly less VF damage than eyes with HTG (mean, NTG/HTG: mean deviation (MD) -3.69/-9.77 dB, p = 0.0001; pattern standard deviation (PSD) 4.80/7.17 dB, p = 0.0001). The nerve fibre layer of NTG patients was thicker than that of HTG patients (mean, NTG/HTG: GDx total: 46.9/44.0 μm, p = 0.073; GDx superior: 57.2/49.9 μm, p = 0.0001; GDx inferior: 54.9/49.7 μm, p = 0.001). At an equal level of glaucomatous structural damage of the ONH indicated by cupping, rim area and rim volume, NTG patients seem to have a less affected visual field and a better preserved nerve fibre layer than HTG patients. © 2013 The Authors. Acta Ophthalmologica © 2013 Acta Ophthalmologica Scandinavica Foundation. Published by Blackwell Publishing Ltd.

  6. Prediction of tension-type headache risk in adolescents

    Directory of Open Access Journals (Sweden)

    K. A. Stepanchenko

    2016-08-01

    Full Text Available Tension-type headache is the actual problem of adolescent neurology, which is associated with the prevalence of the disease, the tendency of the disease to the chronic course and a negative impact on performance in education, work capacity and quality of patients’ life. The aim. To develop a method for prediction of tension-type headache occurrence in adolescents. Materials and methods. 2342 adolescent boys and girls at the age of 13-17 years in schools of Kharkiv were examined. We used questionnaire to identify the headache. A group of adolescents with tension-type headache - 1430 people (61.1% was selected. The control group included 246 healthy adolescents. Possible risk factors for tension-type headache formation were divided into 4 groups: genetic, biomedical, psychosocial and social. Mathematical prediction of tension-type headache risk in adolescents was performed using the method of intensive indicators normalization of E.N. Shigan, which was based on probabilistic Bayesian’s method. The result was presented in the form of prognostic coefficients. Results. The most informative risk factors for tension-type headache development were the diseases, from which the teenager suffered after 1 year (sleep disorders, gastrointestinal diseases, autonomic disorders in the family history, traumatic brain injury, physical inactivity, poor adaptation of the patient in the kindergarten and school, stresses. Diagnostic scale has been developed to predict the risk of tension-type headache. It includes 23 prognostic factors with their gradation and meaning of integrated risk indicator, depending on individual factor strength influence. The risk of tension-type headache development ranged from 25,27 to 81,43 values of prognostic coefficient (low probability (25,27-43,99, the average probability (43,99-62,71 and high probability (62,71- 81,43. Conclusion. The study of tension-type headache risk factors, which were obtained by using an assessed and

  7. Dynamic surface tension of natural surfactant extract under superimposed oscillations.

    Science.gov (United States)

    Reddy, Prasika I; Al-Jumaily, Ahmed M; Bold, Geoff T

    2011-01-04

    Surfactant dysfunction plays a major role in respiratory distress syndrome (RDS). This research seeks to determine whether the use of natural surfactant, Curosurf™ (Cheisi Farmaceutici, Parma, Italy), accompanied with pressure oscillations at the level of the alveoli can reduce the surface tension in the lung, thereby making it easier for infants with RDS to maintain the required level of functional residual capacity (FRC) without collapse. To simulate the alveolar environment, dynamic surface tension measurements were performed on a modified pulsating bubble surfactometer (PBS) type device and showed that introducing superimposed oscillations about the tidal volume excursion between 10 and 70 Hz in a surfactant bubble lowers interfacial surface tension below values observed using tidal volume excursion alone. The specific mechanisms responsible for this improvement are yet to be established; however it is believed that one mechanism may be the rapid transient changes in the interfacial area increase the number of interfacial binding sites for surfactant molecules, increasing adsorption and diffusion to the interface, thereby decreasing interfacial surface tension. Existing mathematical models in the literature reproduce trends noticed in experiments in the range of breathing frequencies only. Thus, a modification is introduced to an existing model to both incorporate superimposed pressure oscillations and demonstrate that these may improve the dynamic surface tension in the alveoli. Copyright © 2010 Elsevier Ltd. All rights reserved.

  8. Measurement of dynamic surface tension by mechanically vibrated sessile droplets.

    Science.gov (United States)

    Iwata, Shuichi; Yamauchi, Satoko; Yoshitake, Yumiko; Nagumo, Ryo; Mori, Hideki; Kajiya, Tadashi

    2016-04-01

    We developed a novel method for measuring the dynamic surface tension of liquids using mechanically vibrated sessile droplets. Under continuous mechanical vibration, the shape of the deformed droplet was fitted by numerical analysis, taking into account the force balance at the drop surface and the momentum equation. The surface tension was determined by optimizing four parameters: the surface tension, the droplet's height, the radius of the droplet-substrate contact area, and the horizontal symmetrical position of the droplet. The accuracy and repeatability of the proposed method were confirmed using drops of distilled water as well as viscous aqueous glycerol solutions. The vibration frequency had no influence on surface tension in the case of pure liquids. However, for water-soluble surfactant solutions, the dynamic surface tension gradually increased with vibration frequency, which was particularly notable for low surfactant concentrations slightly below the critical micelle concentration. This frequency dependence resulted from the competition of two mechanisms at the drop surface: local surface deformation and surfactant transport towards the newly generated surface.

  9. Effects of eugenol on resting tension of rat atria

    Directory of Open Access Journals (Sweden)

    R.R. Olivoto

    2014-04-01

    Full Text Available In cardiac and skeletal muscle, eugenol (μM range blocks excitation-contraction coupling. In skeletal muscle, however, larger doses of eugenol (mM range induce calcium release from the sarcoplasmic reticulum. The effects of eugenol are therefore dependent on its concentration. In this study, we evaluated the effects of eugenol on the contractility of isolated, quiescent atrial trabeculae from male Wistar rats (250-300 g; n=131 and measured atrial ATP content. Eugenol (1, 3, 5, 7, and 10 mM increased resting tension in a dose-dependent manner. Ryanodine [100 µM; a specific ryanodine receptor (RyR blocker] and procaine (30 mM; a nonspecific RyR blocker did not block the increased resting tension induced by eugenol regardless of whether extracellular calcium was present. The myosin-specific inhibitor 2,3-butanedione monoxime (BDM, however, reversed the increase in resting tension induced by eugenol. In Triton-skinned atrial trabeculae, in which all membranes were solubilized, eugenol did not change resting tension, maximum force produced, or the force vs pCa relationship (pCa=-log [Ca2+]. Given that eugenol reduced ATP concentration, the increase in resting tension observed in this study may have resulted from cooperative activation of cardiac thin filaments by strongly attached cross-bridges (rigor state.

  10. Seeking balance to dialectic tensions in teaching through philosophic inquiry.

    Science.gov (United States)

    Hodges, H F

    1997-01-01

    To propose a plausible means of cultural criticism of nursing's educational environment for preparing new nurses by exploring epistemological tensions and their consequences from the perspective of educators. Naturalistic, qualitative, philosophic. Six nurse educators teaching in a university-based traditional BSN program were interviewed in one southeastern state of the United States about their experience as creative, innovative teachers during 1991. Three major themes were reflections of the positivist work culture of teaching, reconciliation of tensions, and repercussions from personal choices. Educators reconcile dialectic tension by suppression, subordination, or equilibrium and are influenced by their sense of tension and willingness to be risk takers. Philosophical conflicts are inherent in nursing when commitments to empirical knowledge and personal meaning are both valued. A plausible means for moving beyond this tension is to increase awareness of the dynamics and consequences that occur when perspectives seem contradictory. Schools of nursing socialize future nurses. Calling into question the context in which the professional nursing culture is transmitted and reproduced is necessary if nurses of the future are to be in the forefront of changing health care.

  11. Effects of eugenol on resting tension of rat atria.

    Science.gov (United States)

    Olivoto, R R; Damiani, C E N; Kassouf Silva, I; Lofrano-Alves, M S; Oliveira, M A; Fogaça, R T H

    2014-04-01

    In cardiac and skeletal muscle, eugenol (μM range) blocks excitation-contraction coupling. In skeletal muscle, however, larger doses of eugenol (mM range) induce calcium release from the sarcoplasmic reticulum. The effects of eugenol are therefore dependent on its concentration. In this study, we evaluated the effects of eugenol on the contractility of isolated, quiescent atrial trabeculae from male Wistar rats (250-300 g; n=131) and measured atrial ATP content. Eugenol (1, 3, 5, 7, and 10 mM) increased resting tension in a dose-dependent manner. Ryanodine [100 µM; a specific ryanodine receptor (RyR) blocker] and procaine (30 mM; a nonspecific RyR blocker) did not block the increased resting tension induced by eugenol regardless of whether extracellular calcium was present. The myosin-specific inhibitor 2,3-butanedione monoxime (BDM), however, reversed the increase in resting tension induced by eugenol. In Triton-skinned atrial trabeculae, in which all membranes were solubilized, eugenol did not change resting tension, maximum force produced, or the force vs pCa relationship (pCa=-log [Ca2+]). Given that eugenol reduced ATP concentration, the increase in resting tension observed in this study may have resulted from cooperative activation of cardiac thin filaments by strongly attached cross-bridges (rigor state).

  12. The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

    1998-12-31

    This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

  13. Surface tension in microsystems engineering below the capillary length

    CERN Document Server

    Lambert, Pierre

    2014-01-01

    This book describes how surface tension effects can be used by engineers to provide mechanical functions in miniaturized products (<1 mm). Even if precursors of this field such as Jurin or Laplace already date back to the 18th century, describing surface tension effects from a mechanical perspective is very recent. The originality of this book is to consider the effects of capillary bridges on solids, including forces and torques exerted both statically and dynamically by the liquid along the 6 degrees-of-freedom. It provides a comprehensive approach to various applications, such as capillary adhesion (axial force), centering force in packaging and micro-assembly (lateral force) and recent developments such as a capillary motor (torque). It devises how surface tension can be used to provide mechanical functions such as actuation (bubble-actuated compliant table), sealing and tightness, energy harvesting, nanodispending.

  14. Surface tension alteration on calcite, induced by ion substitution

    DEFF Research Database (Denmark)

    Sakuma, Hiroshi; Andersson, Martin Peter; Bechgaard, Klaus

    2014-01-01

    The interaction of water and organic molecules with mineral surfaces controls many processes in nature and industry. The thermodynamic property, surface tension, is usually determined from the contact angle between phases, but how does one understand the concept of surface tension at the nanoscale...... in the pore water. Incorporation of MgSO4 into calcite, which is energetically favored, decreases surface tension and releases polar oil compounds......., where particles are smaller than the smallest droplet? We investigated the energy required to exchange Mg2+ and SO4 2- from aqueous solution into calcite {10.4} surfaces using density functional theory. Mg2+ substitution for Ca2+ is favored but only when SO4 2- is also present and MgSO4 incorporates...

  15. A density gradient theory based method for surface tension calculations

    DEFF Research Database (Denmark)

    Liang, Xiaodong; Michelsen, Michael Locht; Kontogeorgis, Georgios

    2016-01-01

    The density gradient theory has been becoming a widely used framework for calculating surface tension, within which the same equation of state is used for the interface and bulk phases, because it is a theoretically sound, consistent and computationally affordable approach. Based on the observation...... that the optimal density path from the geometric mean density gradient theory passes the saddle point of the tangent plane distance to the bulk phases, we propose to estimate surface tension with an approximate density path profile that goes through this saddle point. The linear density gradient theory, which...... assumes linearly distributed densities between the two bulk phases, has also been investigated. Numerical problems do not occur with these density path profiles. These two approximation methods together with the full density gradient theory have been used to calculate the surface tension of various...

  16. A space tethered towing method using tension and platform thrusts

    Science.gov (United States)

    Meng, Zhongjie; Wang, Bingheng; Huang, Panfeng

    2017-01-01

    Orbit maneuver via tether is a promising countermeasure for space debris removal and satellite orbit transfer. A space tethered towing method is explored that utilizes thrust to fulfill transfer and bounded tension to stabilize tether heading. For this purpose, a time-energy optimal orbit is designed by Gauss pseudospectral method. The theoretical attitude commands are obtained by equilibria analysis. An effective attitude control strategy is presented where the commands are optimized first and then feedback controller is designed. To deal with the underactuated problem with tension constraint, hierarchical sliding mode theory is employed and an adaptive anti-windup module is added to mitigate the actuator saturation. Simulation results show that the target is towed effectively by the thrusts, and a smooth tracking for the commands of tether length and in-plane tether heading is guaranteed by the bounded tension. In addition, the designed controller also presents appreciable robustness to model error and determination error.

  17. Uniaxial Tension Test of Slender Reinforced Early Age Concrete Members

    Directory of Open Access Journals (Sweden)

    Wenbo Zhang

    2011-08-01

    Full Text Available The present study aims to obtain the tensile properties of early age concrete based on a uniaxial tension test employing RC slender members. First, the paper shows that concrete strain is equal to the strain of rebar at the mid-span of the RC member. The tensile Young’s modulus and the strain capacity of early age concrete are estimated using strain measurements. The experiment indicated that the tensile Young’s modulus at an early age is higher than the compressive modulus. This observation was similar to one found in a previous investigation which used a direct tension test of early age concrete. Moreover, the paper describes how an empirical equation for mature concrete can be applied to the relation between uniaxial tensile strength and splitting tensile strength even in early age concrete. Based on a uniaxial tension test, the paper proposes an empirical equation for the relationship between standard bond stresses and relative slip.

  18. Reefing Line Tension in CPAS Main Parachute Clusters

    Science.gov (United States)

    Ray, Eric S.

    2013-01-01

    Reefing lines are an essential feature to manage inflation loads. During each Engineering Development Unit (EDU) test of the Capsule Parachute Assembly System (CPAS), a chase aircraft is staged to be level with the cluster of Main ringsail parachutes during the initial inflation and reefed stages. This allows for capturing high-quality still photographs of the reefed skirt, suspension line, and canopy geometry. The over-inflation angles are synchronized with measured loads data in order to compute the tension force in the reefing line. The traditional reefing tension equation assumes radial symmetry, but cluster effects cause the reefed skirt of each parachute to elongate to a more elliptical shape. This effect was considered in evaluating multiple parachutes to estimate the semi-major and semi-minor axes. Three flight tests are assessed, including one with a skipped first stage, which had peak reefing line tension over three times higher than the nominal parachute disreef sequence.

  19. Modelling of tension stiffening for normal and high strength concrete

    DEFF Research Database (Denmark)

    Christiansen, Morten Bo; Nielsen, Mogens Peter

    1998-01-01

    Accurate calculations of the stiffness of concrete members are rare. Only in the uncracked state and the fully cracked state, where the reinforcement is near yielding, the stiffness calculations are relatively easy. The difficulties are due to the fact that concrete between cracks may give...... a substantial contribution to the stiffness, a phenomenon which is generally referred to as tension stiffening. The present paper describes a new theory of tension stiffening. It is based on a simple physical model for pure tension, which works with three different stages of crack generation. In a simplified...... form the model is extended to apply to biaxial stress fields as well. To determine the biaxial stress field, the theorem of minimum complementary elastic energy is used. The theory has been compared with tests on rods, disks, and beams of both normal and high strength concrete, and very good results...

  20. On innovation patterns and value-tensions in public services

    DEFF Research Database (Denmark)

    Fuglsang, Lars; Rønning, Rolf

    2015-01-01

    to the possibility of intertwined innovation patterns. Focusing public sector services, this paper agues that intertwined innovation patterns emerge within public services as a response to value-tensions. Values can be defined as measures for beneficial behaviour that guide innovation. Value-tensions in public......In the innovation studies literature, innovation patterns have been described, such as science based and practice based innovation, that varies amongst industrial sectors. As a consequence, firms become distinguished with respect to their typical innovation pattern. Less attention has been paid...... services include tensions between the political, economic, communal, aesthetic and intellectual values. The contribution of the paper to service innovation research is the emphasis on the concept of intertwined innovation patterns, such as the intertwinement of science driven and task driven innovation...

  1. Tissue-Viability Monitoring Using an Oxygen-Tension Sensor

    Science.gov (United States)

    Tanase, Dafina; Komen, Niels; Draaijer, Arie; Kleinrensink, Gert-Jan; Jeekel, Johannes; Lange, Johan F.; French, Paddy J.

    Many patients still die every year as a result of anastomotic leakage after surgery. An objective aid to monitor the anastomotic site pre- and postoperatively and detect leakage at an early stage is needed. We propose a miniature measurement system to detect adequate tissue oxygenation pre- and postoperatively (continuously for 7 days) on the colon. The complete sensor chip should include an oxygen-tension sensor (pO2), a carbon dioxide tension sensor (pCO2) and a temperature sensor. The work presented here focuses on the measurements done with the oxygen-tension and temperature sensors. In-vitro measurements have been initially performed to test the sensor system and in-vivo tests were carried out on the kidney and the intestines of male wistar rats. The results obtained so far have shown the suitability of this technique for clinical application, therefore sensor-system miniaturisation is presently underway.

  2. Phase behavior and interfacial tension studies of surfactant systems

    Energy Technology Data Exchange (ETDEWEB)

    Franses, E.I.

    1979-01-01

    Parallel studies of isomerically pure sodium P(1-heptylnonyl) benzene sulfoante, Texas No. 1, its mixture with sodium dodecyl sulfate (SDS), and the petroleum sulfonate TRS 10-80 were made. Phase behavior in water, in decane, and in water-decane mixtures was studied by spectroturbidimetry, polarizing light microscopy, ultracentrifugation, ultrafiltration, densitometry, conductimetry, low-frequency, 0.2 to 20 kHz, dielectric relaxation, isopiestic vapor pressure, and nuclear magnetic resonance spectroscopy. It was deduced that ultralow tensions (less than 0.01 dyn/cm) arise from the dispersed microcrystallites which form a third, usually liquid crystalline, phase at the decane-brine interfacial region. It appears that neither molecular adsorption from solution for micelles have anything to do with ultralow tensions, which appear to be sensitive to the third phase microstructure. The implications of these results for the mechanism of ultralow tensions in surfactant flooding processes for enhanced petroleum recovery are discussed.

  3. Propagation of Financial Tensions from Developed Economies to Emerging Economies

    Directory of Open Access Journals (Sweden)

    Mihaela-Carmen MUNTEAN

    2011-03-01

    Full Text Available This paper aims to present the effect they have financial tensions in countries with developed economies on emerging economies. Because many economies have entered into recession, this has resulted in significant slowing of economic growth. The paper’s objectives are related to the presentation of the current global economic situation, the rapidity with which covered the entire world financial crisis. Also, there are presented the levels of development trade flows, financial and monetary, the financials tensions' effect in developed economies and emerging economies, financial ratios and analysis, their composition and relations between them. The methodologies used in this paper are based on economic analysis and a financial interpretation and econometric calculations of the propagation of financial tensions.

  4. Sun pipeline`s tensioned cover system saves storage costs

    Energy Technology Data Exchange (ETDEWEB)

    Blaisdell, J.R. [Sun Pipe Line Co., Detroit, MI (United States); Lydick, L. [National Seal Co., Aurora, IL (United States)

    1996-02-01

    Sun Pipe Line chose the Columbia tensioned floating cover (TFC) system from Columbia Geosystems for several reasons. First, capital costs for the TFC system are considerably lower than those for structural metal or concrete systems. Installation requires less time than fixed structures, and construction costs are about one-tenth as much. A second reason for the choice is its patented tower/tension cover design which easily accommodates fluctuating fluid levels in brine ponds, even in a rapid drawdown. When brine is pumped into the storage chambers, changes in brine ponds can be as great as ten feet. The tensioned design maintains folds of extra material on the outer perimeter of the cover above fluid level. As fluid levels fall, the curtain unfolds and adequate reservoir coverage is maintained.

  5. Traumatic tension chylothorax in a child: A case report

    Directory of Open Access Journals (Sweden)

    Burkley D. Snow

    2015-04-01

    Full Text Available Blunt trauma is the leading cause of death of children and adolescents in the United States. Potentially life-threatening injuries from blunt trauma to the chest must be identified and treated immediately. Clinician familiarity with the range of possible injuries assists in timely diagnosis and therapy. Chylothorax from injury to the thoracic duct is a rare consequence of blunt chest trauma. Tension chylothorax is exceptionally rare. We present a case of a 22-month old boy found to have a traumatic tension chylothorax during initial evaluation in the resuscitation bay after transfer from another facility. There have been no previous reports of a pediatric tension chylothorax after blunt trauma. Management consisted of drainage with tube thoracostomy, parenteral nutrition, and octreotide until the chyle leak resolved. Surgical ligation of the thoracic duct was not required.

  6. The new financing techniques and the reorganization of the Mexican electric industry; Las nuevas tecnicas de financiamiento y la reorganizacion de la industria electrica mexicana

    Energy Technology Data Exchange (ETDEWEB)

    Islas Samperio, Jorge; Rodriguez Viqueira, Luis [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (UNAM), D. F. (Mexico)

    1997-12-31

    The exhaustion of the financing model of the Mexican Electric Industry based on foreign credits, the State contribution and in a small part from auto-financing, has determined the search for new financing sources for the investment in this capital intensive sector. The main characteristic of the State new strategy to increase the investment capacity is to incite the private capital to make massive investments in the electric production segment. Nevertheless, there are different modalities to make the private capital participate in this sector`s segment. In this paper we make an analysis of the new financing techniques and their relationship with the regulations and the electric industry structure. Finally, the role of the conservation and the appropriate use of the energy is discussed as a mechanism for the modulation of the pressures coming from the financial sphere over the reorganization process of the National electric industry. [Espanol] El agotamiento del modelo de financiamiento de la industria electrica mexicana que tiene como base los creditos extranjeros, los aportes del estado y una pequena parte de autofinanciamiento, ha determinado la busqueda de nuevas fuentes de financiamiento de las inversiones de este sector intensivo en capital. La caracteristica principal de la nueva estrategia del estado para aumentar la capacidad de inversion es la de incitar al capital privado a realizar inversiones masivas en el segmento de la produccion electrica. Existen sin embargo diferentes modalidades para hacer participar al capital privado en este segmento del sector. En el presente trabajo hacemos un analisis de las nuevas tecnicas de financiamiento y sus relaciones con la reglamentacion y la estructura de la industria electrica. Por ultimo, se discute el papel del ahorro y uso eficiente como mecanismo para modular las presiones provenientes de la esfera financiera sobre el proceso de reorganizacion de la industria electrica nacional.

  7. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N. [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1995-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  8. UNA TECNICA ESTADISTICA PARA MEDIR LA CONFLICTIVIDAD SOCIAL A TRAVES DEL REGISTRO ARQUEOLOGICO (A Statistical Technique to Measure Social Conflict through the Archaeological Record

    Directory of Open Access Journals (Sweden)

    Pascual Izquierdo-Egea

    2015-03-01

    Full Text Available Se presenta aqui una tecnica estadistica para medir la conflictividad social a traves del registro mortuorio. Nace al amparo del metodo de valoracion contextual empleado en el analisis de los ajuares funerarios desde 1993. Se trata de una herramienta fundamental para el desarrollo de la arqueologia de los fenomenos sociales, cuyos relevantes resultados empiricos avalan su trascendencia teorica. Tras proceder a su conceptualizacion en funcion de la desigualdad social y la riqueza relativa, se explican las dos clases de conflictividad social definidas: estructural o estatica y coyuntural o dinamica. Finalmente, se incluyen sus conexiones con la ley demografica de Malthus a traves de sus dos parametros: poblacion y recursos. Todo este entramado teorico se ilustra con algunas aplicaciones referidas a las civilizaciones antiguas, abarcando la protohistoria iberica, la Mesoamerica prehispanica o la Roma altoimperial. ENGLISH: A statistical technique to measure social conflict through the mortuary record is presented here. It is born under the contextual valuation method used in the analysis of grave goods since 1993. This is a fundamental tool for the development of the archaeology of social phenomena, whose relevant empirical results support its theoretical significance. After conveying its conceptualization in terms of social inequality and relative wealth, the two classes of social conflict are explained: static or structural and dynamic or conjunctural. Finally, connections with the Malthusian demographic law through its two parameters—population and resources—are included. The synthesis of these theoretical frameworks is illustrated with applications to ancient civilizations, including Iberian protohistory, prehispanic Mesoamerica, and early imperial Rome.

  9. Calcitonin Gene-Related Peptide in Tension-Type Headache

    Directory of Open Access Journals (Sweden)

    M. Ashina

    2002-01-01

    Full Text Available In the last 10 years there has been increasing interest in the role of calcitonin gene-related peptide (CGRP in primary headaches. Tension-type headache is one of the most common and important types of primary headaches, and ongoing nociception from myofascial tissues may play an important role in the pathophysiology of this disorder. CGRP sensory fibers are preferentially located in the walls of arteries, and nerve fibers containing CGRP accompany small blood vessels in human cranial muscles. It is well established that nociception may lead to release of CGRP from sensory nerve endings and from central terminals of sensory afferents into the spinal cord. It has also been shown that density of CGRP fibers around arteries is increased in persistently inflamed muscle. These findings indicate that ongoing activity in sensory neurons in the cranial muscles may be reflected in changes of plasma levels of neuropeptides in patients with chronic tension-type headache. To explore the possible role of CGRP in tension-type headache, plasma levels of CGRP were measured in patients with chronic tension-type headache. This study showed that plasma levels of CGRP are normal in patients and unrelated to headache state. However, the findings of normal plasma levels of CGRP do not exclude the possibility that abnormalities of this neuropeptide at the neuronal or peripheral (pericranial muscles levels play a role in the pathophysiology of tension-type headache. Investigation of CGRP in other compartments with new sensitive methods of analysis is necessary to clarify its role in tension-type headache.

  10. Surface tension in plasmas related to double layer formation

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, Sebastian; Lozneanu, Erzilia [Al. I. Cuza University, Dept. of Plasma Physics, Iasi (Romania)

    2001-07-01

    Self-organized space charge configurations bordered by electric double layers appear in plasma as the result of the transition into a state characterized by local minimum of the free energy. Considering the self-assemblage process of such a complex well-confined space-charge configuration in plasma, known by the name of ball of fire, as a nucleation process, it becomes possible to define an equivalent surface tension for the double layer that covers the core of the ball of fire and to make some predictions for its surface tension coefficient and capacitance. (author)

  11. Surface tension mediated conversion of light to work

    Science.gov (United States)

    Okawa, David; Pastine, Stefan J; Zettl, Alexander K; Frechet, Jean M. J

    2014-12-02

    Disclosed are a method and apparatus for converting light energy to mechanical energy by modification of surface tension on a supporting fluid. The apparatus comprises an object which may be formed as a composite object comprising a support matrix and a highly light absorptive material. The support matrix may comprise a silicon polymer. The highly light absorptive material may comprise vertically aligned carbon nanotubes (VANTs) embedded in the support matrix. The composite object is supported on a fluid. By exposing the highly light absorptive material to light, heat is generated, which changes the surface tension of the composite object, causing it to move physically within the fluid.

  12. Fiber optic Fabry-Perot sensor for surface tension analysis.

    Science.gov (United States)

    Márquez-Cruz, Violeta A; Hernández-Cordero, Juan A

    2014-02-10

    We demonstrate a new technique for analyzing surface tension of liquids. This is done upon examining the interference signals reflected from a remnant drop pending at the cleaved end of a single mode optical fiber. The resulting interference patterns are fitted to a multimirror Fabry-Perot model yielding information of the drop size. We show that the wetting process of the fiber plays an important role in drop formation; in particular, the drop size can be correlated to the surface tension of the liquid sample. The proposed configuration may render useful for liquids analysis using small sample volume.

  13. Measuring oxygen tension in the anterior chamber of rabbits.

    Science.gov (United States)

    McLaren, J W; Dinslage, S; Dillon, J P; Roberts, J E; Brubaker, R F

    1998-09-01

    Measuring the concentration of oxygen in the aqueous humor without penetrating the eye would provide a new dimension in understanding aqueous humor and corneal dynamics. In this study a preinvasive method was developed for determining the cameral oxygen concentration in anesthetized rabbits by measuring the excited-state lifetime of a phosphorescent dye. A scanning ocular fluorometer was designed to excite phosphorescence with a brief flash of light and to measure the decay of luminescence for as long as 1000 microsec after excitation. The measurement window was scanned through the depth of the anterior chamber or fixed at the mid-anterior chamber. A depot of the phosphorescent dye Pd-uroporphyrin was injected into the vitreous of eight pigmented rabbits, and within a few days the dye was measurable in the anterior chamber. The excited-state lifetime of this dye is inversely correlated to oxygen concentration and was calibrated by measuring the lifetime of dye in cuvettes equilibrated with oxygen-nitrogen mixtures. Oxygen tensions were determined from lifetimes measured in the open eye, under a polymethylmethacrylate (PMMA) contact lens, under two oxygen-permeable contact lenses, and immediately after lid closure. Oxygen tension in the mid-anterior chamber before placing a PMMA contact lens was 23 +/- 3 mm Hg (mean +/- SD; n = 6). After 20 minutes of PMMA lens wear, oxygen tension decreased to 4 +/- 2 mm Hg. When the focal diamond was scanned through the anterior chamber, oxygen tension was 24 +/- 5 mm Hg near the corneal endothelium and decreased to 17 +/- 8 mm Hg near the crystalline lens. Under the PMMA contact lens this gradient reversed: Oxygen tensions near the endothelium and lens were 3 +/- 2 mm Hg and 6 +/- 2 mm Hg, respectively. Lid closure for 10 minutes or longer decreased the mid-anterior chamber oxygen tension from 21 +/- 2 mm Hg (n = 19 measurements from seven animals) to 10 +/- 3 mm Hg (n = 15 measurements from five animals). Measuring excited

  14. Physics, cosmology and astronomy, 1300 - 1700: tension and accommodation.

    Science.gov (United States)

    Unguru, S.

    The present volume has its origins in a spring 1984 international workshop, held in Tel-Aviv, Israel. It deals with the interrelationships between physics, cosmology and astronomy between 1300 and 1700, with the tensions between the subjects and with the resolution of that tension in the new science which came to supplant medieval philosophy. It also covers the ancient background and includes chapters on Islamic and Jewish contributions, as well as on optics, science and religion, natural philosophy and mathematics, and science and political power.

  15. Phenylephrine Decreases Vascular Tension in Goat Arteries in Specific Circumstances.

    Directory of Open Access Journals (Sweden)

    Renu R Raj

    Full Text Available Phenylephrine (PE causes vasoconstriction through alpha adrenergic receptors. PE-induced vasodilatation has also been reported earlier in pre-constricted vessels. Here we demonstrate in spiral strips of goat arteries that addition of PE can decrease tone even from base-line levels (i.e. not pre-constricted and show that this process requires nitric oxide (NO and alpha adrenergic stimulation, but is cGMP-independent. Under control conditions, PE caused vasoconstriction, but under conditions where NO levels are higher, as with L-Arginine or sodium nitroprusside, PE decreased vessel tension. L-Arginine/PE combination was not able to decrease tension when alpha adrenoceptors were blocked with Phentolamine or endothelial nitric oxide synthase (eNOS was blocked with Nω-Nitro-L-arginine (L-NNA. Propranolol, a beta blocker, was unable to prevent the reduction in tension by the L-Arginine/PE combination. Adrenaline and noradrenaline (and not isoproterenol also reduced vessel tension in the presence of L-Arginine. Even when NO levels were not enhanced, relieving NO from having to stimulate the enzyme soluble guanylyl cyclase (sGC (either by using sGC blockers, namely ODQ or methylene blue, or by enhancing cGMP levels (with sildenafil which by negative feedback probably inhibits sGC led to PE-induced reduction of vascular tension. PMA-phorbol myristate acetate-an agonist which stimulates Protein Kinase C was able to prevent the ability of PE to reduce vascular tension in a high NO environment. Our conclusion is that PE reduces vascular tension through alpha adrenoceptors if there is excess NO availability to activate a putative pathway. Though the reduction of vessel tone by PE is dependent on NO, it is independent of cGMP. Prior treatment with PMA or PE itself can prevent further PE-induced reduction of tension in a high NO environment. The results here suggest, counter-intuitively, that alpha blockers may be of help in the treatment of septic shock

  16. Off-Equilibrium Surface Tension in Colloidal Suspensions

    Science.gov (United States)

    Truzzolillo, Domenico; Mora, Serge; Dupas, Christelle; Cipelletti, Luca

    2014-03-01

    We study the fingering instability of the interface between two miscible fluids, a colloidal suspension and its own solvent. The temporal evolution of the interface in a Hele-Shaw cell is found to be governed by the competition between the nonlinear viscosity of the suspension and an off-equilibrium, effective surface tension Γe. By studying suspensions in a wide range of volume fractions, ΦC, we show that Γe˜ΦC2, in agreement with Korteweg's theory for miscible fluids. The surface tension exhibits an anomalous increase with particle size, which we account for using entropy arguments.

  17. Finite element discretization of two immiscible fluids with surface tension

    OpenAIRE

    Bernardi, Christine; Maarouf, Sarra; Yakoubi, Driss

    2015-01-01

    We consider a model for the flow of two immiscible fluids where the surface tension between both of them is taken into account. We first write the variational formulation of the problem and investigate its well-posedness. Next, we consider a finite element discretization of it and prove optimal a priori error estimates. Numerical experiments confirm its good properties. Résumé. Nous considérons un mod ele pour l'´ ecoulement de deux fluides immiscibles o` u la tension de surface entre les deu...

  18. A Laser Based Instrument for MWPC Wire Tension Measurement

    CERN Document Server

    Baldini, W; Evangelisti, F; Germani, S; Landi, L; Savrié, M; Graziani, G; Lenti, M; Lenzi, M; Passaleva, G; Carboni, G; De Capua, S; Kachtchouk, A

    2007-01-01

    A fast and simple method for the measurement of the mechanical tension of wires of Multi Wires Proportional Chambers (MWPCs) is described. The system is based on commercial components and does not require any electrical connection to the wires or electric or magnetic field. It has been developed for the quality control of MWPCs of the Muon Detector of the LHCb experiment in construction at CERN. The system allows a measurement of the wire tension with a precision better than 0.5% within 3-4 seconds per wire

  19. Theory of Interfacial Tension of Partially Miscible Liquids

    OpenAIRE

    Boudh-Hir, M. -E.; Mansoori, G. A.

    2017-01-01

    The aim of this work is to study the problem of the existence of a fundamental relation between the interfacial tension of a system of two partially miscible liquids and the surface tensions of the pure substances. It is shown that these properties cannot be correlated from the physical point of view. However, an accurate relation between them may be developed using a mathematical artifact. In the light of this work, the basis of the empirical formula of Girifalco and Good is examined. The we...

  20. Tension-induced vesicle fusion: pathways and pore dynamics

    DEFF Research Database (Denmark)

    Shillcock, Julian C.

    2008-01-01

    and eventually opens a pore to complete the fusion process. In pathway II, at higher tension, a stalk is formed during the fusion process that is then transformed by transmembrane pore formation into a fusion pore. Whereas the latter pathway II resembles stalk pathways as observed in other simulation studies......, fusion pathway I, which does not involve any stalk formation, has not been described previously to the best of our knowledge. A statistical analysis of the various processes shows that fusion is the dominant pathway for releasing the tension of the vesicles. The functional dependence of the observed...

  1. Dropwise condensation of low surface tension fluids on omniphobic surfaces.

    Science.gov (United States)

    Rykaczewski, Konrad; Paxson, Adam T; Staymates, Matthew; Walker, Marlon L; Sun, Xiaoda; Anand, Sushant; Srinivasan, Siddarth; McKinley, Gareth H; Chinn, Jeff; Scott, John Henry J; Varanasi, Kripa K

    2014-03-05

    Compared to the significant body of work devoted to surface engineering for promoting dropwise condensation heat transfer of steam, much less attention has been dedicated to fluids with lower interfacial tension. A vast array of low-surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants are used in a number of industrial applications, and the development of passive means for increasing their condensation heat transfer coefficients has potential for significant efficiency enhancements. Here we investigate condensation behavior of a variety of liquids with surface tensions in the range of 12 to 28 mN/m on three types of omniphobic surfaces: smooth oleophobic, re-entrant superomniphobic, and lubricant-impregnated surfaces. We demonstrate that although smooth oleophobic and lubricant-impregnated surfaces can promote dropwise condensation of the majority of these fluids, re-entrant omniphobic surfaces became flooded and reverted to filmwise condensation. We also demonstrate that on the lubricant-impregnated surfaces, the choice of lubricant and underlying surface texture play a crucial role in stabilizing the lubricant and reducing pinning of the condensate. With properly engineered surfaces to promote dropwise condensation of low-surface tension fluids, we demonstrate a four to eight-fold improvement in the heat transfer coefficient.

  2. Ethical and Organisational Tensions for Work-Based Learners

    Science.gov (United States)

    Moore, Lesley J.

    2007-01-01

    Purpose: This paper aims to focus on examples of the perceived tensions of the healthcare work-based learners as they experienced paradigm shifts in both practice and education. Design/methodology/approach: Examples are drawn from a qualitative study to examine work-based learning (WBL) workshops in a Dutch healthcare setting, and a developmental…

  3. Creative thinking in Africa: tensions through change | Mans | Journal ...

    African Journals Online (AJOL)

    Research on creativity is a relatively recent phenomenon in Africa. Following the many changes that have impacted upon Africa in the past century, tensions have emerged between traditional and contemporary interpretations of creativity. This article will reflect on some common indigenous views of creativity, particularly in ...

  4. Liquid-liquid interfacial tension of electrolyte solutions

    NARCIS (Netherlands)

    Bier, Markus; Zwanikken, J.W.; van Roij, R.H.H.G.

    2008-01-01

    It is theoretically shown that the excess liquid-liquid interfacial tension between two electrolyte solutions as a function of the ionic strength I behaves asymptotically as (-) for small I and as (±I) for large I. The former regime is dominated by the electrostatic potential due to an unequal

  5. Tension Empyema Thoracis | Ooko | Annals of African Surgery

    African Journals Online (AJOL)

    He subsequently developed cardiovascular collapse requiring an emergent right chest tube which drained over 2 liters of pus under pressure. The cardiovascular system stabilized and he subsequently underwent decortication for trapped lung and had an uneventful postoperative stay. Tension empyema should be ...

  6. Dropwise Condensation of Low Surface Tension Fluids on Omniphobic Surfaces

    Science.gov (United States)

    Rykaczewski, Konrad; Paxson, Adam T.; Staymates, Matthew; Walker, Marlon L.; Sun, Xiaoda; Anand, Sushant; Srinivasan, Siddarth; McKinley, Gareth H.; Chinn, Jeff; Scott, John Henry J.; Varanasi, Kripa K.

    2014-01-01

    Compared to the significant body of work devoted to surface engineering for promoting dropwise condensation heat transfer of steam, much less attention has been dedicated to fluids with lower interfacial tension. A vast array of low-surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants are used in a number of industrial applications, and the development of passive means for increasing their condensation heat transfer coefficients has potential for significant efficiency enhancements. Here we investigate condensation behavior of a variety of liquids with surface tensions in the range of 12 to 28 mN/m on three types of omniphobic surfaces: smooth oleophobic, re-entrant superomniphobic, and lubricant-impregnated surfaces. We demonstrate that although smooth oleophobic and lubricant-impregnated surfaces can promote dropwise condensation of the majority of these fluids, re-entrant omniphobic surfaces became flooded and reverted to filmwise condensation. We also demonstrate that on the lubricant-impregnated surfaces, the choice of lubricant and underlying surface texture play a crucial role in stabilizing the lubricant and reducing pinning of the condensate. With properly engineered surfaces to promote dropwise condensation of low-surface tension fluids, we demonstrate a four to eight-fold improvement in the heat transfer coefficient. PMID:24595171

  7. Surface tension regularizes the crack singularity of adhesion

    NARCIS (Netherlands)

    Karpitschka, Stefan; van Wijngaarden, L.; van Wijngaarden, L.; Snoeijer, Jacobus Hendrikus

    2016-01-01

    The elastic and adhesive properties of a solid surface can be quantified by indenting it with a rigid sphere. Indentation tests are classically described by the JKR-law when the solid is very stiff, while recent work highlights the importance of surface tension for exceedingly soft materials. Here

  8. Why is surface tension a force parallel to the interface?

    NARCIS (Netherlands)

    Marchand, Antonin; Weijs, Joost H.; Weijs, Joost; Snoeijer, Jacobus Hendrikus; Andreotti, Bruno

    2011-01-01

    A paperclip can float on water. Drops of mercury do not spread on a surface. These capillary phenomena are macroscopic manifestations of molecular interactions and can be explained in terms of surface tension. We address several conceptual questions that are often encountered when teaching

  9. Drops, Sieves, and Paintbrushes: Teaching About Surface Tension

    Science.gov (United States)

    Barnes, George B.

    1978-01-01

    Surface tension, a characteristic of liquids, is discussed in this article. Several activities appropriate to the elementary grades are described and explained. Each activity uses common materials to explore this tendancy of water to act as if it were surrounded by a membrane. (MA)

  10. Measurement of surface and interfacial tension using pendant drop tensiometry.

    Science.gov (United States)

    Berry, Joseph D; Neeson, Michael J; Dagastine, Raymond R; Chan, Derek Y C; Tabor, Rico F

    2015-09-15

    Pendant drop tensiometry offers a simple and elegant solution to determining surface and interfacial tension - a central parameter in many colloidal systems including emulsions, foams and wetting phenomena. The technique involves the acquisition of a silhouette of an axisymmetric fluid droplet, and iterative fitting of the Young-Laplace equation that balances gravitational deformation of the drop with the restorative interfacial tension. Since the advent of high-quality digital cameras and desktop computers, this process has been automated with high speed and precision. However, despite its beguiling simplicity, there are complications and limitations that accompany pendant drop tensiometry connected with both Bond number (the balance between interfacial tension and gravitational forces) and drop volume. Here, we discuss the process involved with going from a captured experimental image to a fitted interfacial tension value, highlighting pertinent features and limitations along the way. We introduce a new parameter, the Worthington number, Wo, to characterise the measurement precision. A fully functional, open-source acquisition and fitting software is provided to enable the reader to test and develop the technique further. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

  11. A Modified Jaeger's Method for Measuring Surface Tension.

    Science.gov (United States)

    Ntibi, J. Effiom-Edem

    1991-01-01

    A static method of measuring the surface tension of a liquid is presented. Jaeger's method is modified by replacing the pressure source with a variable pressure head. By using this method, stationary air bubbles are obtained thus resulting in controllable external parameters. (Author/KR)

  12. Surface tension of water in the presence of perfluorocarbon vapors.

    Science.gov (United States)

    Chernyshev, Vasiliy S; Skliar, Mikhail

    2014-03-28

    Fluorocarbons are highly hydrophobic, biocompatible compounds with a variety of medical applications. Despite significant interest, the study of interfacial properties of fluorocarbons in aqueous systems has received limited attention. In this study, we investigate the influence of perfluoropentane and perfluorohexane vapors on the surface tension of water at room temperature. The results show a substantial decrease in the surface tension of water in the presence of perfluorocarbon vapors. In the investigated range of partial pressures up to the saturation value, a linear correlation between the surface tension and the partial pressure was found. This suggests that an adsorbed perfluorocarbon layer is formed on the surface of water. For comparison, the effect of the perfluorocarbon vapor on the surface tension of methanol was also investigated and a similar dependence was observed. Our results indicate that the stability and dynamic transitions of fluorocarbon colloids, which may be dispersed under physiological conditions as microdroplets, bubbles, or their combination, are likely affected by the composition of liquid and gas phases.

  13. Surface Tension between Two Paradigms of Writing Instruction.

    Science.gov (United States)

    Glasgow, Jacqueline

    1995-01-01

    Reviews the tensions between discourse-centered writing instruction and expressivist approaches. Considers the conflict when the writing instructor's approach differs from the writing tutor's approach. Explores the possibilities of a reflective response style of writing instruction. Advocates such an approach as a useful means of fostering writing…

  14. Dialectical Theory: Testing the Relationships between Tensions and Relational Satisfaction.

    Science.gov (United States)

    Allen, Mike; And Others

    A study explored psychometric relationships among three dialectical tensions (connection/autonomy, openness/closedness, and novelty/predictability). A confirmatory factor analysis using 694 undergraduate students (347 romantic dyads) culled from various courses in a large midwestern metropolitan university confirmed the existence and independence…

  15. Size effect in tension perpendicular to the grain

    DEFF Research Database (Denmark)

    Pedersen, Martin Bo Uhre; Clorius, Christian Odin; Damkilde, Lars

    1999-01-01

    The strength in tension perpendicular to the grain is known to decrease with an increase in the stressed volume. Usually this size effect is explained on a stochastic basis, that is an explanation relying on an increased probability of encountering a strength reducing flaw when the volume...

  16. Analysis of off-axis tension test of wood specimens

    Science.gov (United States)

    Jen Y. Liu

    2002-01-01

    This paper presents a stress analysis of the off-axis tension test of clear wood specimens based on orthotropic elasticity theory. The effects of Poisson's ratio and shear coupling coefficient on stress distribution are analyzed in detail. The analysis also provides a theoretical foundation for the selection of a 10° grain angle in wood specimens for the...

  17. Effects of post mortem temperature on rigor tension, shortening and ...

    African Journals Online (AJOL)

    Fully developed rigor mortis in muscle is characterised by maximum loss of extensibility. The course of post mortem changes in ostrich muscle was studied by following isometric tension, shortening and change in pH during the first 24 h post mortem within muscle strips from the muscularis gastrocnemius, pars interna at ...

  18. Tension induced phase transitions in biomimetic fluid membranes

    Science.gov (United States)

    Shapiro, Marc; Vlahovska, Petia

    2012-11-01

    Membranes in eukaryotic cells are mixtures of hundreds of lipid species. The lipid diversity enables membranes to phase separate and form domains, called rafts, which play a critical role in cell functions such as signaling and trafficking. The phase transitions underlying raft formation have been extensively studied as a function of temperature and composition. However, the third dimension of the phase diagram, i.e., the tension (2D pressure), is still unexplored because membrane tension is difficult to control and quantify. To overcome this challenge, we develop two approaches, capillary micromechanics and electrodeformation, in which the tension is regulated by the area dilation accompanying deformation of a vesicle (a closed membrane). The first technique consists of forcing an initially quasi-spherical vesicle through a tapered glass microcapillary, while the second method utilizes uniform electric fields to deform the vesicle into an ellipsoid. Domains are visualized using a fluorescent dye, which preferentially partitions in one of the phases. The experimental results suggest that the miscibility temperature (at which domains form in an initially homogeneous membrane) increases with applied tension. Domain motions and coarsening are also investigated.

  19. Page 1 Sharma parameter and surface tension of liquids 229 ...

    Indian Academy of Sciences (India)

    tension with increasing pressure since the compressibility decreases with increasing pressure, in accordance with the experiment for liquids (Patterson and Rastogi 1970;. Soczkiewicz 1977; Sharma 1981, 1984a; Sahli et al 1976). For most of the simple, non- polar liquids, the values of Eötvös constant, Ke are of the order of ...

  20. Tension-type headache: one or more headaches?

    OpenAIRE

    Sjaastad, Ottar

    2011-01-01

    In this context, the focus will be on the homogeneity of tension-type headache (T-TH): is it a disease? Or: is it more likely to be a syndrome? A multiplicity of disorders from as drastically different fields of medicine as disorders caused by environmental gases, intra-psychic conflicts, and nuchal/cervical disorders can putatively fake T-TH.

  1. Tension-Free Vaginal Tape versus Transobturator Tape for ...

    African Journals Online (AJOL)

    Objectives: The transobturator tape (TOT) is based on a similar principle as the tension-free vaginal tape (TVT), but introduced through the obturator foramen. The aim of this study was to compare these slings as surgical procedures for the treatment of stress urinary incontinence (SUI) in women. Patients and Methods: This ...

  2. Theoretical Studies of the Surface Tension of Liquid Metal System

    Science.gov (United States)

    Stroud, D. G.; Shih, W. H.

    1985-01-01

    A major goal of this project is to understand the surface tension and other thermophysical properties of liquid metals and alloys from a fundamental viewpoint. The approach is to calculate these quantities by a first principles technique which combines the statistical-mechanical theory of the liquid state with an electronic pseudopotential theory of electrons in metals. The inhomogeneity of the surface is treated using an ionic-density-functional formalism developed with the support of NASA. Of particular interest are the variation of surface tension with temperature and impurity concentration: such variations strongly influence the types of convection which make take place in a low-gravity environment. Some progress has already been achieved in computing the reduction of surface tension due to the presence of low-surface-tension impurities, and the corresponding surface segregation of such impurities. In the coming year, it is planned to concentrate on the surface properties of materials of particular interest to the MSA program: Si, Ga and GaSn alloys. An additional goal is to gain some theoretical understanding of the high temperature thermophysical properties of liquid metals, particularly high melting point materials which have not been studied extensively from a theoretical viewpoint.

  3. Nanofluidic bubble pump using surface tension directed gas injection

    NARCIS (Netherlands)

    Tas, Niels Roelof; Berenschot, Johan W.; Lammerink, Theodorus S.J.; Elwenspoek, Michael Curt; van den Berg, Albert

    2002-01-01

    A new concept for liquid manipulation has been developed and implemented in surface-micromachined fluid channels. It is based on the surface tension directed injection of a gas into the liquid flow through micrometer-sized holes in the microchannel wall. The injected gas is directed to an exhaust by

  4. Predictive factors of bladder outlet obstruction following the tension ...

    African Journals Online (AJOL)

    H. Elghamrawi

    Abstract. Objectives: To identify patients at risk for postoperative outlet obstruction after the tension-free vaginal tape obturator (TVTO) procedure in order to allow for better counseling and possible treatment alternatives. Subjects and methods: This prospective study was carried out on 85 women who underwent the TVTO.

  5. Essential Tension: Specialization with Broad and General Training in Psychology

    Science.gov (United States)

    Roberts, Michael C.

    2006-01-01

    The practice fields of psychology develop through specialization in training and education. The recognized specialties play a major role in developing new opportunities for professional psychology and providing quality services for the public. The essential tension comes from the balance of innovation and tradition and, in professional psychology,…

  6. Economic Bases for Lessening U.S.-Soviet Tensions.

    Science.gov (United States)

    Brown, Lester R.

    1982-01-01

    Discusses how the increasing Soviet dependence on American grain can be used to reduce international tensions. Soviet agricultural policies could affect worker morale and the entire Soviet political system. President Reagan is well-positioned to engage the Soviets in serious discussions of reductions in both nuclear and conventional weapons. (AM)

  7. Feeling Wall Tension in an Interactive Demonstration of Laplace's Law

    Science.gov (United States)

    Letic, Milorad

    2012-01-01

    Laplace's Law plays a major role in explanations of the wall tension of structures like blood vessels, the bladder, the uterus in pregnancy, bronchioles, eyeballs, and the behavior of aneurisms or the enlarged heart. The general relation of Laplace's law, expressing that the product of the radius of curvature (r) and pressure (P) is equal to wall…

  8. Living in Tension: Secularism and Christianity in the Military

    Science.gov (United States)

    2011-03-24

    homosexual persons to serve in the military. This project seeks to analyze the growing tension that is created by the move to increased...chaplaincy in the United States when it instituted a paid chaplaincy for the Army. George Washington understood the importance of nurturing the religious

  9. Tension and Compression Creep Apparatus for wood-Plastic Composites

    Science.gov (United States)

    Scott E. Hamel; John C. Hermanson; Steven M. Cramer

    2011-01-01

    Design of structural members made of wood-plastic composites (WPC) is not possible without accurate test data for tension and compression. The viscoelastic behavior of these materials means that these data are required for both the quasi-static stress-strain response, and the long-term creep response. Their relative incompressibility causes inherent difficulties in...

  10. Dissipative Particle Dynamics of tension-induced membrane fusion

    DEFF Research Database (Denmark)

    Shillcock, Julian C.

    2009-01-01

    Recent studies of tension-induced membrane fusion using dissipative particle dynamics (DPD) simulations are briefly reviewed. The stochastic nature of the fusion process makes it necessary to simulate a large number of fusion attempts in order to obtain reliable fusion statistics and to extract...

  11. Plasticity size effects in tension and compression of single crystals

    NARCIS (Netherlands)

    Deshpande, VS; Needleman, A; Van der Giessen, E

    2005-01-01

    The effect of size and loading conditions on the tension and compression stress-strain response of micron-sized planar crystals is investigated using discrete dislocation plasticity. The crystals are taken to have a single active slip system and both small-strain and finite-strain analyses are

  12. Indentation of a floating elastic sheet: geometry versus applied tension

    Science.gov (United States)

    Box, Finn; Vella, Dominic; Style, Robert W.; Neufeld, Jerome A.

    2017-10-01

    The localized loading of an elastic sheet floating on a liquid bath occurs at scales from a frog sitting on a lily pad to a volcano supported by the Earth's tectonic plates. The load is supported by a combination of the stresses within the sheet (which may include applied tensions from, for example, surface tension) and the hydrostatic pressure in the liquid. At the same time, the sheet deforms, and may wrinkle, because of the load. We study this problem in terms of the (relatively weak) applied tension and the indentation depth. For small indentation depths, we find that the force-indentation curve is linear with a stiffness that we characterize in terms of the applied tension and bending stiffness of the sheet. At larger indentations, the force-indentation curve becomes nonlinear and the sheet is subject to a wrinkling instability. We study this wrinkling instability close to the buckling threshold and calculate both the number of wrinkles at onset and the indentation depth at onset, comparing our theoretical results with experiments. Finally, we contrast our results with those previously reported for very thin, highly bendable membranes.

  13. Surface energy and surface tension of liquid metal nanodrops

    Directory of Open Access Journals (Sweden)

    Shebzukhov A.A.

    2011-05-01

    Full Text Available A unitary approach has been proposed for the calculation of surface energy and surface tension of nanoparticle being in equilibrium with its saturated vapor on both flat and curved surfaces at given temperature. The final equations involve parameters dependent on the type of premelting structure: bcc, fcc or hcp.

  14. Instructional Design and Professional Informal Learning: Practices, Tensions, and Ironies

    Science.gov (United States)

    Yanchar, Stephen C.; Hawkley, Melissa N.

    2015-01-01

    This qualitative study explored the nature of informal learning in professional instructional designers' everyday work activities. Based on intensive interviews with six full-time practitioners, and using a hermeneutic form of data analysis, this study produced seven themes concerning the practices, tensions, and ironies associated with this…

  15. Closed-Loop Tension Control System for Injection Moulding Machine

    African Journals Online (AJOL)

    In any of these processes, the system was to ensure significant tension control in the filament. The design system process began by selection of components with justification. These components were then assembled and tested using Arduino platform with C-programming and finally, conclusion and recommendation were ...

  16. Aerodynamic Profiles of Women with Muscle Tension Dysphonia/Aphonia

    Science.gov (United States)

    Gillespie, Amanda I.; Gartner-Schmidt, Jackie; Rubinstein, Elaine N.; Abbott, Katherine Verdolini

    2013-01-01

    Purpose: In this study, the authors aimed to (a) determine whether phonatory airflows and estimated subglottal pressures (est-P[subscript sub]) for women with primary muscle tension dysphonia/aphonia (MTD/A) differ from those for healthy speakers; (b) identify different aerodynamic profile patterns within the MTD/A subject group; and (c) determine…

  17. Masseter muscle tension and chewing ability in older persons.

    Science.gov (United States)

    Ohara, Yuki; Hirano, Hirohiko; Watanabe, Yutaka; Edahiro, Ayako; Sato, Emiko; Shinkai, Shoji; Yoshida, Hiroto; Mataki, Shiro

    2013-04-01

    Mastication is an important function to maintain, not only for oral health, but also for quality of life. An easy-to-use method to evaluate the chewing ability of elderly people in any environment is necessary. Few studies have discussed the effectiveness of the masseter muscle by palpation. The purpose of this study was to clarify the availability of masseter muscle tension assessment methods by investigating its relationship with oral health status, and comparing it with other methods of assessing chewing ability. This cross-sectional study was carried out with 547 community-dwelling elderly subjects (246 men and 301 women; mean age 73.8 ± 6.2 years) who participated in a comprehensive annual geriatric health examination in 2010 at Kusatsu, Gunma, Japan. Chewing ability was evaluated by masseter muscle tension palpation, differences of masseter muscle thickness, occlusal force, self-reported chewing ability, and the number of remaining and functional teeth. Masseter muscle thickness was measured by ultrasonography. Masseter muscle thickness and occlusal force showed significant differences between males and females. The strength of masseter muscle tension palpation was significantly associated with men's occlusal force, masseter muscle thickness, the number of remaining and functional teeth, and self-reported chewing ability (P muscle thickness, the number of remaining teeth, and self-reported chewing ability and results of palpation (P palpation of masseter muscle tension is a reliable and easy-to-use method to evaluate the chewing ability of elderly people. © 2012 Japan Geriatrics Society.

  18. Democracy and development in the age of globalisation: Tensions ...

    African Journals Online (AJOL)

    User

    Democracy and development in the age of globalisation: Tensions and contradictions in the context of specific African challenges1. JOHN CANTIUS MUBANGIZI. Professor, Deputy Vice-Chancellor and Head of the College of Law and Management. Studies, University of KwaZulu-Natal, South Africa. 1 INTRODUCTION.

  19. k-String tensions and their large-N dependence

    CERN Document Server

    Greensite, J.; Patella, A.

    2011-01-01

    We consider whether the 1/N corrections to k-string tensions must begin at order 1/N^2, as in the Sine Law, or whether odd powers of 1/N, as in Casimir Scaling, are also acceptable. The issue is important because different models of confinement differ in their predictions for the representation-dependence of k-string tensions, and corrections involving odd powers of 1/N would seem to be ruled out by the large-N expansion. We show, however, that k-string tensions may, in fact, have leading 1/N corrections, and consistency with the large-N expansion, in the open string sector, is achieved by an exact pairwise cancellation among terms involving odd powers of 1/N in particular combinations of Wilson loops. It is shown how these cancellations come about in a concrete example, namely, strong coupling lattice gauge theory with the heat-kernel action, in which k-string tensions follow the Casimir scaling rule.

  20. Diagnosis system for nozzles in high voltage equipment; Sistema de diagnostico para boquillas en equipos de alta tension

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez Nino, Jose; Escorsa Morales, Oscar [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Lopez Azamar, Ernesto [Comision Federal de Electricidad (Mexico)

    2000-07-01

    The nozzles used in high voltage electrical equipment, such as power transformers and circuit breakers, constitute the elements that present greater fault risk. On the other hand, the faults in the nozzles cause, in most of the cases catastrophic damages, that expose to risk the maintenance personnel of the plant and the peripheral equipment. With the purpose of contributing with on-line monitoring techniques that indicate the nozzles condition and allow to anticipate their possible fault, the Instituto de Investigaciones Electricas (IIE) performed for the laboratory of tests of equipment and materials (LAPEM) of Comision Federal de Electricidad (CFE), a project for the development of a system for the measurement of capacitive currents in these equipments. This system allows to determine the variation in capacitance and dielectric losses, and to determine the presence of internal partial discharges in nozzles of 115, 230 and 400 kV. With this information it is possible to determine the condition of the internal isolation of the nozzles and retire them from service before deterioration takes place that puts in danger the integrity of the equipment. The management of electrical equipment of the Instituto de Investigaciones Electricas developed for LAPEM a system that measures capacitive currents of power transformer nozzles. This system was designed with the purpose of installing it in a transformer of a 400 kV machine, in the fossil power station of Tula, Hidalgo, of the Comision Federal de Electricidad. [Spanish] Las boquillas empleadas en los equipos electricos de alta tension, como transformadores de potencia e interruptores, constituyen los elementos que presentan mayor riesgo de falla. Por otro lado, las fallas en las boquillas provocan en la mayoria de los casos danos catastroficos que ponen en riesgo al personal de mantenimiento de la planta y al equipo periferico. Con la finalidad de aportar tecnicas de monitoreo en linea que indiquen el estado de las

  1. Pipe type poles in transmission power lines; Postes tipo tubo en lineas de transmision

    Energy Technology Data Exchange (ETDEWEB)

    Cervantes E, Mario; Becerril A, Armando [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

    1997-12-31

    The first supports for transmission power lines were relatively small structures, of simple configuration, to save reduced clearances to resist load in accordance with its need; with the technical development, gradually appeared higher and higher electric tensions and greater obstacles to overcome, consequently the design of the supports had to be adapted to the new conditions. This gave rise to the development of a specific technique that would adequate and incorporate the continuous engineering advances. In this document the initial considerations on the design poles pipe type are examined; within these considerations mention is made of: the design, the manufacture, the prototype tests, installation, quality control and foundations. The type tube pole is portrayed, as well as the steel reinforcement, finally the types of precast foundations are shown [Espanol] Los primeros soportes para lineas de transmision fueron estructuras relativamente pequenas, de configuracion simple, para salvar claros reducidos y resistir cargas proporcionales a sus necesidades, con el desarrollo de la tecnica, fueron apareciendo tensiones electricas cada vez mas elevadas y obstaculos mayores que vencer, por lo que el diseno de los soportes tuvo que adaptarse a las nuevas condiciones. Esto dio origen al desenvolvimiento de una tecnica especifica que fuese adecuando e incorporando los continuos avances de la ingenieria. En este documento se tratan las consideraciones iniciales del diseno de los postes tipo tubo; dentro de estas consideraciones se citan: el diseno, la fabricacion, las pruebas de prototipo, montajes, control de calidad y cimentaciones. Se ilustra el poste tipo tubo, al igual que el armado del poste, por ultimo se muestra los tipos de cimentaciones precoladas

  2. Rheological Parameters as Affected by Water Tension in Subtropical Soils

    Directory of Open Access Journals (Sweden)

    Patricia Pértile

    2016-01-01

    Full Text Available ABSTRACT Rheological parameters have been used to study the interaction between particles and the structural strength of soils subjected to mechanical stresses, in which soil composition and water content most strongly affect soil resistance to deformation. Our objective was to evaluate the effect of water tension on rheological parameters of soils with different mineralogical, physical, and chemical composition. Surface and subsurface horizons of four Oxisols, two Ultisols, one Alfisol, and one Vertisol were physically and chemically characterized; their rheological parameters were obtained from amplitude sweep tests under oscillatory shear on disturbed soil samples that were saturated and subjected to water tension of 1, 3, 6, and 10 kPa. In these samples, the rheological parameters linear viscoelastic deformation limit (γL, maximum shear stress (τmax, and integral z were determined. By simple regression analysis of the rheological parameters as a function of soil water tension, we observed increased mechanical strength with increasing water tension up to at least 6 kPa, primarily due to increased capillary forces in the soil. However, increased elasticity assessed by γL was not as expressive as the increase in structural rigidity assessed by τmax and integral z. Elastic deformation of the soil (γL increases with the increase in the number of bonds among particles, which depend on the clay, total carbon, expansive clay mineral, and cation contents; however, maximum shear resistance (τmax and structural stiffness (integral z mainly increase with clay, kaolinite, and oxide content by increasing the strength of interparticle bonds. A decrease in mechanical strength occurs for water tension of 10 kPa (the lowest water content evaluated in sandy horizons or in horizons with a high proportion of resistant microaggregates (pseudosand, when associated with low bulk density, due to fewer points of contact between soil particles and therefore

  3. Perception of tension in music: musicians versus nonmusicians.

    Science.gov (United States)

    Fredrickson, W E

    2000-01-01

    Music therapists are often highly trained musicians who deal with diverse populations, most of whom do not have formal musical training. Questions may arise regarding the issue of a therapist's ability to understand, and predict, the musical perceptions and preferences of a client when their own background is so different. The current work is a look at a series of studies using various musical stimuli and comparing responses of musicians and nonmusicians to perceived "musical tension." Subjects (N = 126) included adult musicians and nonmusicians as well as a case study of a father/daughter. All subjects listened to recordings through individual headphones and were physically isolated from other subjects to ensure individuality of responses. Subjects, whether adults or children, were given instructions telling them that they were about to hear a piece of music and that they would be using a Continuous Response Digital Interface (CRDI) dial to trace the musical tension they heard. No specific definition of musical tension was given to any of the subjects. In effect, individual subjects supplied their own definition, either knowingly or unknowingly, in the absence of a formal one. Results indicated that group perceptions of the points at which tension and its release were strongest are remarkably similar between musicians and nonmusicians (correlations ranged from r =.71 to r =.95). Within at least the western art music tradition the likelihood that perceptions of group responses to tension and release in music could be predicted is high. These data indicate that therapists, trained as musicians, might be able to predict with some accuracy the responses of their clients who are not trained musicians.

  4. Waves and Cycles of Religious Tension in History

    Directory of Open Access Journals (Sweden)

    B. FILIPPOV

    2015-02-01

    Full Text Available The notions of «religious awakening» and «religious revival» refer to processes which took place in the history of European civilization. These notions are widely used in academic language and literature. During the last third of the twentieth and the beginning of the twenty-first century, a global phenomenon emerged which can be described as «de-secularization», «religious revival» or «spiritual awakening». This was characteristic of all religions. Sociologists, researchers of religions and political scientists have begun to discuss its nature and character. The author attempts to place it in the broader context of Western European and Russian history of the last five hundred years. He wishes to examine it with reference to the cyclic-wave theory of social development. He introduces the concept of «religious tension» defined as the idea that mankind and the individual cannot be in a state of constant religious tension. Following the wave of spiritual tension or religious revival a «return wave» of spiritual indifference or tranquility succeeds. The two periods taken together constitute a single cycle. As a criterion for assessing the presence or absence of tension, the author highlights popular piety and the religious atmosphere just before the Protestant Reformation. These models are later employed as part of a pattern underlining similar characteristics of religious life at other times. The first section of the article presents the theory behind the problem and the characteristics of the return wave lasting from 1930 to 1960. This was the wave that served as the basis for the theory of secularization. The second section of the article highlights the religious tension characteristic of the second half of the twentieth and the start of the twenty-fi rst century.

  5. Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates

    DEFF Research Database (Denmark)

    Korkiakoski, Samuli; Brøndsted, Povl; Sarlin, Essi

    2016-01-01

    It is well known that standardised tension-tension fatigue test specimens of unidirectional (UD) glass-fibre-reinforced plastics (GFRP) laminates tend to fail at end tabs. The true fatigue life is then underestimated. The first objective of this study was to find for UD GFRP laminates a test spec...... a significant effect on the failure mode and measured fatigue life of the laminates. A significantly higher fatigue life was measured for the laminate with the powder-bound fabric reinforcement when compared to the laminate with the stitched reinforcement.......It is well known that standardised tension-tension fatigue test specimens of unidirectional (UD) glass-fibre-reinforced plastics (GFRP) laminates tend to fail at end tabs. The true fatigue life is then underestimated. The first objective of this study was to find for UD GFRP laminates a test...... specimen that fails in the gauge section. The second objective was to compare fatigue performance of two laminates, one having a newly developed UD powder-bound fabric as a reinforcement and the other having a quasi-UD stitched non-crimp fabric as a reinforcement. In the first phase, a rectangular specimen...

  6. Survismeter, 3-in-1 Instrument for Simultaneous Measurements of Surface Tension, Inter Facial Tension (IFT and Viscosity

    Directory of Open Access Journals (Sweden)

    Man Singh

    2007-12-01

    Full Text Available The article presents Inter Facial Tension (IFT (ift, N m-1 of benzene-water; surface tensions (, N m-1 and viscosities (, N s m-2 of ethanol, glycerol, ethyl acetate, n-hexane, diethyl ether, chloroform, benzene, carbon tetrachloride [CCl4], formic acid, measured with Survismeter with ± 1.1x10-5 N m-1, ± 1.3x10-5 N m-1 and ± 1.1x10-6 N s m-2 accuracies respectively. Also the surface tension and viscosities of carboxymethylcellulose (CMC, dodecylbenzenesulfonicacid (DBSA and tetramethylammoniumhydroxide (TMAH in aqueous media have been measured with survismeter at 298.15 K. IFT of water and benzene interface was determined with survismeter. The survismeter saves resources, user’s efforts and infrastructure more than 80 % as compared to usual methods and prevents 80% disposal of materials to environment. It very accurately measures surface tension and IFT of volatile and poisonous liquids at any desired temperatures as liquids are jacked (jacketed in closed glass made bulbs.

  7. Tensions in the Parent and Adult Child Relationship: Links to Solidarity and Ambivalence

    Science.gov (United States)

    Birditt, Kira S.; Miller, Laura M.; Fingerman, Karen L.; Lefkowitz, Eva S.

    2009-01-01

    Tensions are normative in the parent and adult child relationship, but there is little research on the topics that cause the most tension or whether tensions are associated with overall relationship quality. Adult sons and daughters, aged 22 to 49, and their mothers and fathers (N = 158 families, 474 individuals) reported the intensity of different tension topics and relationship quality (solidarity and ambivalence) with one another. Tensions varied between and within families by generation, gender and age of offspring. In comparison to tensions regarding individual issues, tensions regarding the relationship were associated with lower affective solidarity and greater ambivalence. Findings are consistent with the developmental schism hypothesis, which indicates that parent-child tensions are common and are the result of discrepancies in developmental needs which vary by generation, gender, and age. PMID:19485648

  8. Corrosion characteristics of post-tensioning strands in ungrouted ducts : summary.

    Science.gov (United States)

    2011-01-01

    To prevent corrosion of post-tensioning strands, FDOT construction specifications currently require post-tensioning ducts to be grouted within seven calendar days of strand installation. This period challenges construction schedules on large projects...

  9. Anterior cruciate ligament graft tensioning. Is the maximal sustained one-handed pull technique reproducible?

    Directory of Open Access Journals (Sweden)

    Hirpara Kieran M

    2011-07-01

    Full Text Available Abstract Background Tensioning of anterior cruciate ligament (ACL reconstruction grafts affects the clinical outcome of the procedure. As yet, no consensus has been reached regarding the optimum initial tension in an ACL graft. Most surgeons rely on the maximal sustained one-handed pull technique for graft tension. We aim to determine if this technique is reproducible from patient to patient. Findings We created a device to simulate ACL reconstruction surgery using Ilizarov components and porcine flexor tendons. Six experienced ACL reconstruction surgeons volunteered to tension porcine grafts using the device to see if they could produce a consistent tension. None of the surgeons involved were able to accurately reproduce graft tension over a series of repeat trials. Conclusions We conclude that the maximal sustained one-handed pull technique of ACL graft tensioning is not reproducible from trial to trial. We also conclude that the initial tension placed on an ACL graft varies from surgeon to surgeon.

  10. Tensions in the parent and adult child relationship: Links to solidarity and ambivalence.

    Science.gov (United States)

    Birditt, Kira S; Miller, Laura M; Fingerman, Karen L; Lefkowitz, Eva S

    2009-06-01

    Tensions are normative in the parent and adult child relationship, but there is little research on the topics that cause the most tension or whether tensions are associated with overall relationship quality. In this study, adult sons and daughters, age 22 to 49, and their mothers and fathers (N = 158 families, 474 individuals) reported the intensity of different tension topics and relationship quality (solidarity and ambivalence) with one another. Tensions varied between and within families by generation, gender, and age of offspring. Compared to tensions regarding individual issues, tensions regarding the relationship were associated with lower affective solidarity and greater ambivalence. Findings are consistent with the developmental schism hypothesis, which indicates that parent-child tensions are common and are the result of discrepancies in developmental needs that vary by generation, gender, and age. (c) 2009 APA, all rights reserved.

  11. Anterior cruciate ligament graft tensioning. Is the maximal sustained one-handed pull technique reproducible?

    LENUS (Irish Health Repository)

    O'Neill, Barry J

    2011-07-20

    Abstract Background Tensioning of anterior cruciate ligament (ACL) reconstruction grafts affects the clinical outcome of the procedure. As yet, no consensus has been reached regarding the optimum initial tension in an ACL graft. Most surgeons rely on the maximal sustained one-handed pull technique for graft tension. We aim to determine if this technique is reproducible from patient to patient. Findings We created a device to simulate ACL reconstruction surgery using Ilizarov components and porcine flexor tendons. Six experienced ACL reconstruction surgeons volunteered to tension porcine grafts using the device to see if they could produce a consistent tension. None of the surgeons involved were able to accurately reproduce graft tension over a series of repeat trials. Conclusions We conclude that the maximal sustained one-handed pull technique of ACL graft tensioning is not reproducible from trial to trial. We also conclude that the initial tension placed on an ACL graft varies from surgeon to surgeon.

  12. Twin stability in highly nanotwinned Cu under compression, torsion and tension

    DEFF Research Database (Denmark)

    Hodge, A.M.; Furnish, T.A.; Shute, C.J.

    2012-01-01

    Twin stability under four distinct mechanical loading states has been investigated for highly nanotwinned Cu containing parallel nanotwins 40 nm thick. Observed deformation-induced microstructural changes under tension, compression, tension–tension fatigue and torsion are qualitatively compared...

  13. Emerging Tensions at the Interface of Artificial Intelligence, IPRs & Competition Law in the Health & Life Sciences

    DEFF Research Database (Denmark)

    Minssen, Timo

    This presentation: • describes the interface between Big Data, IPRs & competition law in the life sciences. • highlights selected life-science areas, where tensions and potential clashes are crystallizing. • discusses how these tensions could be addressed...

  14. Accuracy of Transcutaneous Carbon Dioxide Tension Measurements during Cardiopulmonary Exercise Testing

    National Research Council Canada - National Science Library

    Stege, Gerben; van den Elshout, Frank J.J; Heijdra, Yvonne F; van de Ven, Marjo J.T; Dekhuijzen, P.N. Richard; Vos, Petra J.E

    2009-01-01

    Background: Measurements of transcutaneous carbon dioxide tension (PtcCO ) with current devices are proven to provide clinically acceptable agreement with measurements of partial arterial carbon dioxide tension (PaCO...

  15. Dependence on winding tensions for stability of a superconducting coil

    Science.gov (United States)

    Takeo, Masakatsu; Sato, Seiki; Matsuo, Masaaki; Kiss, Takanobu; Takao, Tomoaki; Yamanaka, Atsuhiko; Kashima, Toshihiro; Mito, Toshiyuki; Minamizato, Kazushige

    2003-10-01

    The purpose of this study is to manufacture a high performance superconducting pulse coil by using high strength polyethylene fiber (DF; Dyneema ® fiber) reinforced plastic (DFRP) or Dyneema-glass hybrid composite fiber reinforced plastic (DGFRP) as material of a coil bobbin, which has negative thermal expansion, low frictional coefficient and high thermal conductivity. Description in this paper is as follows. First, thermal strains of several kinds of FRP pipes made by filament-winding (FW) method are measured, and the measured results well agreed with calculated ones by our proposed calculation method about thermal strains of a FW-pipe form. This shows that thermal expansion can be controlled by the proposed design technique of a DGFRP FW-pipe. Moreover, frictional coefficients of FRP plates using as coil structural material are measured and frictional heats are calculated for respective material when contact forces are changed. From these results, we find that the lower winding tension of a coil generates the smaller frictional heat when the frictional coefficient of the coil structural material is low. Furthermore, we systematically measure quench characteristics of many specimens of small superconducting coils using DFRP or DGFRP bobbins with different thermal expansions. From the results of quench tests, we find that the higher winding tension's coils tend to decrease quench current when the coil's bobbin expanded to a direction of circumference during the cooling down to cryogenic temperature, and suitable values of winding tension in a coil are located in region of 2-4 kg/mm 2. Finally, we design and manufacture 100 kJ class superconducting pulse coil by using a DGFRP bobbin, which wound in winding tension of 4 kg/mm 2. In addition, we prepare another 100 kJ class coil with the higher winding tensions of 8 kg/mm 2, and the quench characteristics of the coils are compared. The quench currents in the coils exceed the 95% rating on the load line for critical

  16. Exploitation of biogas in municipal in slaughterhouses: Technical-economical evaluation; Aprovechamiento de biogas en rastros y mataderos municipales: Evaluacion tecnica-economica

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Hernandez, Donaji A.; Castaneda Sanchez, Arlem M.; Garcia Galeana, Erika [Universidad Nacional Autonoma de Mexico (UNAM), Facultad de Ingenieria (Mexico)

    2009-07-01

    Nowadays the treatment of the solid and liquid remainders in the municipal slaughter houses is small because of the idea that the treatment is expensive; nevertheless, it is important to take advantage of them, since this can reduce to the environmental impacts they cause, as well as the discharge of greenhouse effect gas. The use of bio digesters for the treatment of these remainders has become an efficient process to avoid the exit of methane gas to the atmosphere, taking advantage of the biogas and other residues to produce electricity. The elaboration of a technical-economical evaluation of a pilot plant shows the costs of investment, maintenance, as well as the income that can be obtained by the total usage of these residues and the savings in the electrical power consumption. The analysis of this study demonstrates that the use of biogas through bio-digesters for the generation of electrical energy is a profitable option for the treatment of the residues, because the income by the sale of compost, blood flour, as well as the diminution of the electrical tariff, justifies the initial investment. These projects will be more attractive, if they use financing and are registered as MDL projects. [Spanish] Actualmente el tratamiento de los desechos solidos y liquidos en los rastros y mataderos municipales es poco pues se tiene la idea de que el tratamiento es costoso; sin embargo, es importante que se aprovechen ya que esto puede reducir los impactos ambientales que provocan, asi como la emision de gases de efecto invernadero. El uso de biodigestores para el tratamiento de estos desechos, se ha convertido en un proceso eficiente para evitar la salida de gas metano a la atmosfera, aprovechando el biogas y otros residuos para producir electricidad. La elaboracion de una evaluacion tecnica-economica de una planta piloto, muestra los costos de inversion, mantenimiento, asi como los ingresos que se pueden obtener por el aprovechamiento total de estos residuos y el

  17. Identification of the non-linear hysteretic behavior of a belt tensioner

    OpenAIRE

    Michon, Guilhem; Manin, Lionel; Almajid, Ahmad; Dufour, Regis

    2004-01-01

    Mechanical tensioners are widely used in belt drive systems of automotive engines. They act to maintain a minimum tension in the slack span and to decrease transverse belt vibrations. They are composed of an idler pulley, an arm lever and a torsional springThe paper deals with the modeling of the dynamic behaviour of a tensioner. First an experimental investigation permits the characterisation of the tensioner: it is subjected to a force-deflection test carried out using a specific experiment...

  18. Variations of the perception of mood and tension of music excerpts depending on the visual context

    OpenAIRE

    Payri, Blas

    2009-01-01

    We study the influence that image features may have on music tension and liveliness perception. 72 music excerpts from different genres and periods were selected, and 72 still shots were taken from different animation features little known to the subjects. 62 subjects rated the isolated images for tension and liveliness, 37 subjects rated the isolated music excerpts for tension and liveliness, and 153 subjects rated the music excerpts combined with the images for music tension and liveliness,...

  19. 33 CFR 147.827 - Marlin Tension Leg Platform safety zone.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Marlin Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.827 Marlin Tension Leg Platform safety zone. (a) Description. The Marlin Tension Leg Platform (Marlin TLP), Viasca Knoll, Block 915 (VK...

  20. [Effect of bile acids on surface tension of bronchoalveolar lavage fluid in rabbits].

    Science.gov (United States)

    Wang, Fei; Zhao, Cong; Tian, Yinghong; Yin, Yanru

    2014-10-01

    To observe changes in surface tension of bronchoalveolar lavage fluids (BALF) in rabbits with hyperbilirubinemia and the influence of bile diluents and 5 different bile acids on BALF surface tension to provide better insight into the regulatory role of bile acids on respiratory function. Bronchoalveolar lavage with 0.9% normal saline was carried out in 30 male New Zealand rabbits and the surface tensions of BALF were measured. The changes in BALF surface tension was measured in rabbits with hyperbilirubinemia. Different concentrations of bile diluents, normal saline, or water solutions of 5 bile acids were added into the collected BALF to test their influence on the surface tension of BALF. The BALF from rabbits with hyperbilirubinemia showed a significantly increased surface tension (Psurface tension of the BALF by 21.15%, 26.09%, and 19.64%, respectively. Among the water solutions of the 5 bile acids, UDCA produced no significant influence on the surface tension of BALF while CDCA, CA, LCA, and DCA increased the surface tension by 16.10%, 21.66%, 14.21%, and 13.05%, respectively. The surface tension of BALF increases significantly during hyperbilirubinemia. Bile diluents as well as the free bile acids CDCA, CA, LCA and DCA, but not UDCA, can increase the surface tension of BALF, suggesting that these bile acids may emulsify pulmonary alveolar surfactants to increase the alveolar surface tension.

  1. 33 CFR 147.837 - Marco Polo Tension Leg Platform safety zone.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Marco Polo Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.837 Marco Polo Tension Leg Platform safety zone. (a) Description. Marco Polo Tension Leg Platform, Green Canyon 608 (GC 608), located...

  2. 33 CFR 147.809 - Mars Tension Leg Platform safety zone.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Mars Tension Leg Platform safety... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.809 Mars Tension Leg Platform safety zone. (a) Description. The Mars Tension Leg Platform (Mars TLP) is located at position 28°10′10.29...

  3. Rapid pre-tension loss in the Ilizarov external fixator: an in vitro study.

    NARCIS (Netherlands)

    Aquarius, R.J.M.; Kampen, A. van; Verdonschot, N.J.J.

    2007-01-01

    BACKGROUND AND PURPOSE: Wire pre-tension in the Ilizarov frame is considered to be important in order to reduce movements that can impair fracture healing. Wires will eventually lose part of their pre-tension, however. In order to gain more insight into the need for wire pre-tension, we

  4. RESEARCH OF INFLUENCE OF FRONT TENSION AT ROLLING OF PERIODIC PROFILE IN NON-DRIVE ROLLERS

    Directory of Open Access Journals (Sweden)

    L. A. Isayevich

    2012-01-01

    Full Text Available Influence of a forward tension is theoretically investigated at a rolling of the periodic profiles used as elastic elements of spring suspension brackets. The power balance of rolling process with a tension is analyzed. Dependences for definition of a critical corner and size of its increment are received at a rolling with a forward tension.

  5. Treatment of General Tension: Subjective and Physiological Effects of Progressive Relaxation.

    Science.gov (United States)

    Borkovec, T. D.; And Others

    1978-01-01

    Presence or absence of tension release significantly influenced the number of relaxation cycles necessary to produce reports of deep relaxation, frequency of practice, and successfulness of eliminating daily tension at follow-up. Subject's ability to reduce physiological activity by a procedure contributed to reductions in subjective tension.…

  6. Assessment Results of Patellar Fracture Treatment after Tension Band Wiring

    Directory of Open Access Journals (Sweden)

    S. Abdolhossein Mehdinasab

    2013-04-01

    Full Text Available Background: To assess the results of patellar fracture treatment by tension band wiring. Materials and Methods: This retrospective study was performed to evaluate clinical and radiological results of patellar fracture during past 6 years.Results: Twenty four patients were participated in follow-up. Union was occurred in the mean time of 2.67±0.61 months. Falling down and direct trauma were the most common cause of fracture. Most common complications were thigh muscle atrophy and pin irritation. Excellent and good results in 87.5% and fair results in 12.5% of the patients were seen.Conclusion: Fixation of patellar fractures with tension band wiring was associated with a high rate of union.

  7. The idea of animal welfare - developments and tensions

    DEFF Research Database (Denmark)

    Sandøe, Peter; Jensen, Karsten Klint

    2013-01-01

    This paper focuses on developments and tensions within the idea of animal welfare. There is divergence among those who believe in the idea of animal welfare. First, we discuss what it takes for farm animal welfare to be good enough. How far should society go beyond the starting point...... of the Brambell Committee, which was to prevent avoidable suffering? Secondly, we turn to the tricky question of how welfare should be distributed between animals. Here, a tension within the concept of animal welfare, between a focus on the indivudual animal and on the herd, flock or shoal, is pointed out....... Finally, the role of economic considerations is considered, given that animal production takes place in a global market with free trade between countries with various standards of animal welfare....

  8. Lateral Tension-Induced Penetration of Particles into a Liposome

    Directory of Open Access Journals (Sweden)

    Kazuki Shigyou

    2017-07-01

    Full Text Available It is important that we understand the mechanism of the penetration of particles into a living cell to achieve advances in bionanotechnology, such as for treatment, visualization within a cell, and genetic modification. Although there have been many studies on the application of functional particles to cells, the basic mechanism of penetration across a biological membrane is still poorly understood. Here we used a model membrane system to demonstrate that lateral membrane tension drives particle penetration across a lipid bilayer. After the application of osmotic pressure, fully wrapped particles on a liposome surface were found to enter the liposome. We discuss the mechanism of the tension-induced penetration in terms of narrow constriction of the membrane at the neck part. The present findings are expected to provide insight into the application of particles to biological systems.

  9. Effects of Induced Surface Tension in Nuclear and Hadron Matter

    Directory of Open Access Journals (Sweden)

    Sagun V.V.

    2017-01-01

    Full Text Available Short range particle repulsion is rather important property of the hadronic and nuclear matter equations of state. We present a novel equation of state which is based on the virial expansion for the multicomponent mixtures with hard-core repulsion. In addition to the hard-core repulsion taken into account by the proper volumes of particles, this equation of state explicitly contains the surface tension which is induced by another part of the hard-core repulsion between particles. At high densities the induced surface tension vanishes and the excluded volume treatment of hard-core repulsion is switched to its proper volume treatment. Possible applications of this equation of state to a description of hadronic multiplicities measured in A+A collisions, to an investigation of the nuclear matter phase diagram properties and to the neutron star interior modeling are discussed.

  10. Pain perception studies in tension-type headache

    DEFF Research Database (Denmark)

    Bezov, David; Ashina, Sait; Jensen, Rigmor

    2011-01-01

    Tension-type headache (TTH) is a disorder with high prevalence and significant impact on society. Understanding of pathophysiology of TTH is paramount for development of effective treatments and prevention of chronification of TTH. Our aim was to review the findings from pain perception studies...... and suprathreshold stimulation have shown presence of generalized hyperalgesia in chronic tension-type headache (CTTH) patients, while DNIC function has been shown to be reduced in CTTH. One imaging study showed loss of gray matter structures involved in pain processing in CTTH patients. Future studies should aim...... been shown to rapidly reverse central sensitization and may be a new modality in treatment of CTTH and other chronic pain disorders....

  11. Tension-induced fusion of bilayer membranes and vesicles

    Science.gov (United States)

    Shillcock, Julian C.; Lipowsky, Reinhard

    2005-03-01

    Maintaining the integrity of their protective plasma membrane is a primary requirement of cells. Accordingly, cellular events that breach the membrane are tightly regulated. Artificial vesicles used in drug delivery must also stay intact until they have reached the desired target. In both cases, the intrinsic resistance of the membrane to rupture must be overcome to allow the efflux of the vesicle's contents. Here, we use mesoscopic simulations to study the fusion of 28-nm-diameter vesicles to 50 × 50 nm2 planar membrane patches over 2 μs. We monitor the time evolution of 93 different fusion attempts. This allows us to construct a global morphology diagram, using the initial tensions of the vesicle and the planar membrane patch as control parameters, and to determine the corresponding fusion statistics. All successful fusion events are observed to occur within 350 ns, which reflects the presence of alternative pathways for the tension relaxation.

  12. Iatrogenic tension pneumothorax in children: two case reports

    Directory of Open Access Journals (Sweden)

    Mayordomo-Colunga Juan

    2009-06-01

    Full Text Available Abstract Introduction Two cases of iatrogenic tension pneumothorax in children are reported. Case presentations Case 1: A 2-year-old boy with suspected brain death after suffering multiple trauma suddenly developed intense cyanosis, extreme bradycardia and generalized subcutaneous emphysema during apnea testing. He received advanced cardiopulmonary resuscitation and urgent bilateral needle thoracostomy. Case 2: A diagnostic-therapeutic flexible bronchoscopy was conducted on a 17-month-old girl, under sedation-analgesia with midazolam and ketamine. She very suddenly developed bradycardia, generalized cyanosis and cervical, thoracic and abdominal subcutaneous emphysema. Urgent needle decompression of both hemithoraces was performed. Conclusion In techniques where gas is introduced into a child's airway, it is vital to ensure its way out to avoid iatrogenic tension pneumothorax. Moreover, the equipment to perform an urgent needle thoracostomy should be readily available.

  13. Changing market values? Tensions of contradicting public management discourses

    DEFF Research Database (Denmark)

    Plotnikof, Mie

    2016-01-01

    The purpose of this paper is to address studies of New Public Governance (NPG) as a post-New Public Management (NPM) tendency. Although NPG is considered a contrast to NPM and its market incentives, it argues that the practices emerging in tensions of NPM and NPG discourses indicate not a clear......-cut shift away from NPM, but rather changes that combine competition with collaboration and trust. Design/methodology/approach It offers a discourse approach to advance the theorizing and empirical unfolding of the tensions of contradicting, yet co-existing discourses of NPM and NPG and their effects...... in practice. Drawing on a case study from the Danish daycare sector, it investigates local collaborative governance initiatives that develop new quality-management methods. Findings The study elucidates how NPM and NPG discourses collide in local practices of public sector management within daycare. It shows...

  14. Tension Pneumocephalus with Diplegia and Deterioration of Consciousness

    Directory of Open Access Journals (Sweden)

    Harald Prüss

    2011-02-01

    Full Text Available Tension pneumocephalus results from intracranial air under pressure as a rare complication after head injury or craniofacial surgery. A 58-year-old man underwent ethmoid sinus surgery and subsequently developed rapidly progressive global headache, restlessness, diplegia with sensory loss, and deterioration of the conscious level. A head CT demonstrated extensive pneumocephalus with gross compression of the brain. The frontal retention of air caused widening of the interhemispheric fissure leading to a peaked appearance of the frontal poles, referred to as the ‘Mount Fuji sign’. Surgical revision of a dural air leak resulted in rapid improvement and full clinical resolution. Early diagnosis of tension pneumocephalus and emergent surgical treatment are crucial to prevent life-threatening deterioration.

  15. Tension pneumocephalus with diplegia and deterioration of consciousness.

    Science.gov (United States)

    Prüss, Harald; Klingebiel, Randolf; Endres, Matthias

    2011-02-14

    Tension pneumocephalus results from intracranial air under pressure as a rare complication after head injury or craniofacial surgery. A 58-year-old man underwent ethmoid sinus surgery and subsequently developed rapidly progressive global headache, restlessness, diplegia with sensory loss, and deterioration of the conscious level. A head CT demonstrated extensive pneumocephalus with gross compression of the brain. The frontal retention of air caused widening of the interhemispheric fissure leading to a peaked appearance of the frontal poles, referred to as the 'Mount Fuji sign'. Surgical revision of a dural air leak resulted in rapid improvement and full clinical resolution. Early diagnosis of tension pneumocephalus and emergent surgical treatment are crucial to prevent life-threatening deterioration.

  16. Post Traumatic Tension Pneumocephalus: The Mount Fuji Sign

    LENUS (Irish Health Repository)

    Ryan, J

    2017-04-01

    Pneumocephalus is defined as the presence of intracranial air. This is most commonly secondary to a traumatic head injury. Tension pneumocephalus presents radiologically with compression of the frontal lobes and widening of the interhemispheric space between the frontal lobes. It is often termed the Mount Fuji sign due to a perceived similarity with an iconic mountain peak in Japan. We present the case of a 52-year-old gentleman who presented to the emergency department shortly before 8am on a Saturday morning following an assault. He was alert and ambulatory with no clinical evidence of raised intracranial pressure. A plain radiograph of the facial bones showed significant pneumocephalus. A later CT was consistent with a tension pneumocephalus which usually necessitates urgent decompression.The patient showed no clinical signs or symptoms of raised intracranial pressure and was managed conservatively. He was discharged home 16 days later with no neurological deficit

  17. Bilateral normal tension glaucoma: Can this be nutritional?

    Directory of Open Access Journals (Sweden)

    Sirisha Senthil

    2017-01-01

    Full Text Available Normal tension glaucoma (NTG also known as low tension glaucoma, presents with optic nerve head and visual field damage in the absence of high intraocular pressure (<21 mmHg. There are several patients of NTG seen in our clinics who have repeatable visual field defects, which may or may not correlate with the disc appearance, but are labeled as glaucoma. Ruling out ischemic, nutritional, and other causes of one-time damage are important before diagnosing an NTG. We report 3 such cases that were misdiagnosed and referred as NTG. All three cases were not glaucomatous and had typical features of nutritional optic neuropathy. The typical clinical features, visual field and imaging abnormalities seen in these two conditions and their management is highlighted in this article. Misdiagnosis leads to inappropriate investigations and treatment, but more importantly would lead to worsening of undiagnosed underlying disease.

  18. Measurement of the angle of superficial tension by images

    Science.gov (United States)

    Yanez M., Javier; Alonso R., Sergio

    2006-02-01

    When a liquid is deposited on a surface, this one form a certain angle with respect to the surface, where depending on its value, it will conclude that so hard it is his adhesion with the surface. By means of the analysis of images we looked for to measure this angle of superficial tension. In order to make this measurement, we propose a technique by means of projective transformations and one method of regression to estimation parameters to conic fitting.

  19. Augmented Gibbs-Tolman Model for Surface Tension.

    Science.gov (United States)

    Tumram, Sukesh; Kesava Rao, K; Ananth, M S

    2017-10-24

    Gibbs developed the thermodynamics of a liquid-vapor system by introducing the idea of a "dividing surface" a hypothetical surface that separates the system into two homogeneous phases. The area and curvatures of a conveniently chosen dividing surface, the "surface of tension", are used to account for the effects of the smooth variation of properties across the actual transition layer between the phases. Tolman (1948, 1949) considered a more detailed model of the interfacial region and obtained expressions for surface tension (σ) and the location of the surface of tension. Based on qualitative arguments, Tolman's model introduced a surface of tension, such that the pressure (P) increases from its saturation value (P sat ) to a maximum value (P max ) as the surface is approached from the vapor side and decreases from (P sat ) to its minimum value (P min ) as the surface is approached from the liquid side. Assuming an exponential decay of (P) away from the surface, Tolman obtained an explicit expression for (σ) in terms of P sat , P max , P min , and two length scales. In the this work, the Gibbs-Tolman (GT) model is used along with the Lee and Kesler (1975) equation of state. The model is augmented to take into account the effect of the density gradient in the transition zone and a 4-parameter augmented model (AGT model) is proposed. The GT and AGT models are shown to fit the data for 152 pure liquids with an absolute average deviation (AAD) of 4.91% and 2.02%, respectively. The corresponding AAD values for 57 liquid mixtures are 4.2% and 3.0% respectively. Arguments are also presented to counter some of the fundamental concerns that have been raised about the GT approach. Although the model correlates the data very well, one of the length parameters turns out to be persistently negative, and the reason for this behavior is not clear.

  20. Surface Tension and Adsorption without a Dividing Surface.

    Science.gov (United States)

    Marmur, Abraham

    2015-11-24

    The ingenious concept of a dividing surface of zero thickness that was introduced by Gibbs is the basis of the theory of surface tension and adsorption. However, some fundamental questions, mainly those related to the location of the dividing surface and the proper definition of relative adsorption, have remained open over the years. To avoid these questions, the present paper proposes to analyze an interfacial phase by defining a thermodynamic system of constant, but nonzero thickness. The interfacial phase is analyzed as it really is, namely a nonuniform three-dimensional entity. The current analysis redevelops the equation for calculating surface tension, though with different assumptions. However, the main point in the proposed model is that the thermodynamic interfacial system, due to its fixed thickness, conforms to the requirement of first-order homogeneity of the internal energy. This property is the key that allows using the Gibbs adsorption isotherm. It is also characteristic of the Gibbs dividing surface model, but has not always been discussed with regard to subsequent models. The resulting equation leads to a simple, "natural" expression for the relative adsorption. This expression may be compared with simulations and sophisticated surface concentration measurements, and from which the dependence of interfacial tension on the solution composition can be derived. Finally, it is important to point out that in order to calculate the interfacial tension as well as the relative adsorption from data on the properties of the interfacial phase, there is no need to know its exact thickness, as long as it is bigger than the actual thickness but sufficiently small.

  1. Study Of Bubble-Count Measurement Of Surface Tension

    Science.gov (United States)

    Nishioka, Gary M.; Berg, James I.

    1993-01-01

    Report presents study of bubble-count method of measurement of surface or interfacial tension of liquids. In method, gas or liquid pumped at known rate along capillary tube. One end of tube open and immersed in liquid that wets tube. Pumped gas or liquid forms bubbles, detaching themselves from immersed open end of tube, and one measures average period, Pi, for formation and detachment of bubbles.

  2. Surface Tension Triggered Wetting and Point of Care Sensor Design.

    Science.gov (United States)

    Falde, Eric J; Yohe, Stefan T; Grinstaff, Mark W

    2015-08-05

    Rapid, simple, and inexpensive point-of-care (POC) medical tests are of significant need around the world. The transition between nonwetting and wetted states is used to create instrument-free surface tension sensors for POC diagnosis, using a layered electrospun mesh with incorporated dye to change color upon wetting. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Tension-free left ITA graft -- the pericardial strip technique.

    Science.gov (United States)

    Nezic, D; Peric, M; Knezevic, A; Cirkovic, M; Jovic, M; Bojic, M

    2001-04-01

    Emphysematous lung occupying the whole dome of the left pleural cavity and expanding well over the midline may occasionally present a significant problem for positioning of the left internal thoracic artery, although the graft has been mobilized up to its origin. To avoid an undue tension on it, we combined a well known technique of the pericardial incision with the pericardial strip technique, enabling the lung to expand freely.

  4. Propagation of Financial Tensions from Developed Economies to Emerging Economies

    OpenAIRE

    Mihaela-Carmen MUNTEAN; Nistor, Costel; Rozalia NISTOR; Panico, Paolo

    2011-01-01

    This paper aims to present the effect they have financial tensions in countries with developed economies on emerging economies. Because many economies have entered into recession, this has resulted in significant slowing of economic growth. The paper’s objectives are related to the presentation of the current global economic situation, the rapidity with which covered the entire world financial crisis. Also, there are presented the levels of development trade flows, financial and monetary, the...

  5. Tension-type headache: one or more headaches?

    Science.gov (United States)

    Sjaastad, Ottar

    Summary In this context, the focus will be on the homogeneity of tension-type headache (T-TH): is it a disease? Or: is it more likely to be a syndrome? A multiplicity of disorders from as drastically different fields of medicine as disorders caused by environmental gases, intra-psychic conflicts, and nuchal/cervical disorders can putatively fake T-TH. T-TH is in all probability a conglomerate of disorders and not one solid, homogeneous disorder. PMID:22152438

  6. Treating tension-type headache -- an expert opinion

    DEFF Research Database (Denmark)

    Bendtsen, Lars; Jensen, Rigmor

    2011-01-01

    INTRODUCTION: Tension-type headache (TTH) is a highly prevalent disorder with enormous costs for the individual and the society. AREAS COVERED: Nonpharmacological and pharmacological treatments are reviewed. Electromyographic (EMG) biofeedback has a documented effect in TTH, while cognitive......-behavioral therapy and relaxation training are most likely to be effective. Physical therapy and acupuncture may be valuable options for patients with frequent TTH. Simple analgesics and nonsteroidal anti-inflammatory drugs are recommended for treatment of episodic TTH. Combination analgesics containing caffeine...

  7. Budded membrane microdomains as regulators for cellular tension

    OpenAIRE

    Sens, Pierre; Turner, Matthew S.

    2005-01-01

    We propose a mechanism for mechanical regulation at the membrane of living cells, based on the exchange of membrane area between the cell membrane and a membrane reservoir. The reservoir is composed of invaginated membrane microdomains which are liable to flatten upon increase of membrane strain, effectively controlling membrane tension. We show that the domain shape transition is first order, allowing for coexistence between flat and invaginated domains. During coexistence, the membrane tens...

  8. Marangoni Flow and Surface Tension of High Temperature Melts

    Science.gov (United States)

    Hibiya, Taketoshi; Ozawa, Shumpei

    Marangoni flow plays an important role in the heat and mass transport for highly value-added high-temperature processes, such as crystal growth, welding, casting, and electron beam melting. For silicon single crystal growth, the effect of the oscillatory Marangoni flow on the introduction of growth striation was discussed by Chen and Wilcox for the first time in 1972 [1]. The existence of the Marangoni flow within molten silicon was proved through microgravity experiments in space on board a sounding rocket in 1983 by Eyer et al. [2], who found formation of growth striation in single crystals even under microgravity, where buoyancy-driven flow was suppressed. To explain the Marangoni effect at the melt surface, surface tension is essential. Keene [3] discussed the oxygen contamination in the surface tension measurement and recommended the use of a levitation technique, which is a containerless process and assures the contamination-free condition from measurement devices. It is well known that flow direction in the weld pool is dependent on surface contamination and that this is related to weldability [4, 5]. Flow direction is controlled by the temperature coefficient of surface tension for molten steels; contaminants are oxygen and sulfur. In the electron beam button melting system, the Marangoni flow is dominant because of intense heating at the melt surface [5]. In this chapter, surface tension of high temperature metallic melts is discussed from the viewpoint of the Marangoni effect in the value-added high temperature processes, particularly from the viewpoint of the effect of oxygen and sulfur. Theoretical treatment for oxygen adsorption is also discussed.

  9. The sociological significance of domestic violence: Tensions, paradoxes and implications

    OpenAIRE

    Hearn, Jeff

    2013-01-01

    Sociology and sociological theory has been effective in analyzing societal and institutional conflict and violence, but less so the specifics of interpersonal violence. This article examines the sociological significance of domestic violence. This relationship, or sometimes its neglect, is underlain by several tensions and paradoxes, which in turn have broader implications for sociology and sociological theory. These matters are examined through: the possible paradox of violence and intimacy ...

  10. Modelling the prestress transfer in pre-tensioned concrete elements

    OpenAIRE

    Abdelatif, A.O.; Owen, J.S.; Hussein, M.F.M.

    2015-01-01

    Three models were developed to simulate the transfer of prestress force from steel to concrete in pre-tensioned concrete elements. The first is an analytical model based on the thick-walled cylinder theory and considers linear material properties for both steel and concrete. The second is an axi-symmetric finite element (FE) model with linear material properties; it is used to verify the analytical model. The third model is a three dimensional nonlinear FE model. This model considers the post...

  11. The role of muscles in tension-type headache

    DEFF Research Database (Denmark)

    Bendtsen, Lars; Fernández-de-la-Peñas, César

    2011-01-01

    or sensitization of myofascial nociceptors could play a role in causing increased pain sensitivity, but firm evidence for a peripheral abnormality still is lacking. Peripheral mechanisms are most likely of major importance in episodic TTH. Sensitization of pain pathways in the central nervous system due......The tenderness of pericranial myofascial tissues and number of myofascial trigger points are considerably increased in patients with tension-type headache (TTH). Mechanisms responsible for the increased myofascial pain sensitivity have been studied extensively. Peripheral activation...

  12. Surface tension and buoyancy in vertical soap films

    OpenAIRE

    Adami, Nicolas

    2013-01-01

    This manuscrit presents our experimental works about maintained vertical soap films. The purpose of this thesis was to realize experiments on vertical soap films. We designed a setup which allows to maintain vertical soap films on large timescales. The thickness profiles of those films were characterized using an infrared absorption method. We then designed an elastic sensor in order to probe the surface tension profiles in our films. Simple mechanical considerations allowed us to draw a s...

  13. Dynamic high-temperature Kolsky tension bar techniques

    OpenAIRE

    Song Bo; Nelson Kevin; Lipinski Ronald; Bignell John; Ulrich G.B.; George E.P.

    2015-01-01

    Kolsky tension bar techniques were modified for dynamic high-temperature tensile characterization of thin-sheet alloys. An induction coil heater was used to heat the specimen while a cooling system was applied to keep the bars at room temperature during heating. A preload system was developed to generate a small pretension load in the bar system during heating in order to compensate for the effect of thermal expansion generated in the high-temperature tensile specimen. A laser system was appl...

  14. Developmental biomechanics of the cervical spine: Tension and compression.

    Science.gov (United States)

    Nuckley, David J; Ching, Randal P

    2006-01-01

    Epidemiological data and clinical indicia reveal devastating consequences associated with pediatric neck injuries. Unfortunately, neither injury prevention nor clinical management strategies will be able to effectively reduce these injuries or their effects on children, without an understanding of the cervical spine developmental biomechanics. Thus, we investigated the relationship between spinal development and the functional (stiffness) and failure biomechanical characteristics of the cervical spine in a baboon model. A correlation study design was used to define the relationships between spinal tissue maturation and spinal biomechanics in both tension and compression. Eighteen baboon cervical spine specimens distributed across the developmental spectrum (1-26 human equivalent years) were dissected into osteoligamentous functional spinal units. Using a servo-hydraulic MTS, these specimens (Oc-C2, C3-C4, C5-C6, C7-T1) were non-destructively tested in tension and compression and then displaced to failure in tension while measuring the six-axes of loads and displacements. The functions describing the developmental biomechanical response of the cervical spine for stiffness and normalized stiffness exhibited a significant direct relationship in both tension and compression loading. Similarly, the tensile failure load and normalized failure load demonstrated significant maturational increases. Further, differences in biomechanical response were observed between the spinal levels examined and all levels exhibited clinically relevant failure patterns. These data support our understanding of the child cervical spine from a developmental biomechanics perspective and facilitate the development of injury prevention or management schema for the mitigation of child spine injuries and their deleterious effects.

  15. Rising Sino-Vietnamese tensions in the South China Sea

    OpenAIRE

    Dicke, Vera; Holbig, Heike

    2014-01-01

    In May 2014 China started to drill for oil near the Paracel Islands, an area claimed by both Vietnam and China as territorial waters, which led to considerable diplomatic tensions and violent actions against Chinese enterprises in Vietnam. China's recent activity reveals an increasing assertiveness, which has raised concerns about possible military actions in the South China Sea. One could argue that China's latest undertaking is proof of its increasingly threatening behavior, thereby confirm...

  16. Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

    Energy Technology Data Exchange (ETDEWEB)

    Rincon Nader, Jorge A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1992-12-31

    The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

  17. Study of the flooding and dehydration processes of a PEM fuel cell using the EIS technique; Estudio de los procesos de inundacion y deshidratacion en una celda de combustible tipo PEM mediante la tecnica EIS

    Energy Technology Data Exchange (ETDEWEB)

    Loyola-Morales, F.; Cano-Castillo, U. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: feloyola@yahoo.com.mx

    2009-09-15

    In this work, a study was conducted of the flooding and dehydration processes of a PEM fuel cell using the EIS technique. The experiments were conducted in a 50 cm{sup 2} cell. The gradual flooding of the system was induced by operating the cell at a potential of 0.3 V and maintaining the gas outlet closed (that is, stoichiometry of 1 for the anode (H{sub 2}) and the cathode (O{sub 2})) to enable the water produced by the reaction to accumulate inside. The gradual dehydration was induced by operating the cell at a potential of 0.3V and establishing a oxidized gas flow at a stoichiometry of 4. EIS tests were applied throughout both processes. The results showed that the EIS technique is highly sensitive for the analysis of the different degrees of the flooding processes by monitoring variations in the imaginary components of total impedance (Z{sup )} or the phase angle ({theta}). For low degrees of flooding, the technique had good sensitivity, between 1 and 6 Hz, while at high degrees of flooding the technique's greatest sensitivity was limited to a range between 1 and 2 Hz. In the case of the dehydration process of the system, the results showed that this type of process can be analyzed for variations in the value of the real component (Z{sup '}) as well as for the imaginary component of total impedance and variations in the phase angle. The analysis of dehydration with Z{sup '} was possible at a rather wide range, from 100 to 1000 Hz; with Z{sup }or {theta} it was only possible at a range of 20 to 200 Hz. [Spanish] En el presente trabajo, se llevo a cabo el estudio de los procesos de inundacion y deshidratacion de una celda de combustible tipo PEM mediante la tecnica EIS. Los experimentos fueron realizados en una celda de 50 cm{sup 2}. La inundacion gradual del sistema se indujo operando la celda a un potencial de 0.3 V de celda y manteniendo la salida de gases cerrada (i. e. estequiometria de 1 tanto en anodo (H{sub 2}) como en catodo (O{sub 2

  18. Revisiting Tension Band Fixation for Difficult Patellar Fractures.

    Science.gov (United States)

    Hambright, Dustin S; Walley, Kempland C; Hall, Amber; Appleton, Paul T; Rodriguez, Edward K

    2017-02-01

    Patella fractures with comminution, osteoporotic bone, and/or previously failed fixation are exceedingly difficult to reduce and fix. Moreover, the risk of symptomatic constructs and patients who are poorly compliant with postoperative activity restrictions can make these complex fracture patterns an even more challenging scenario. Although there is an array of techniques described for comminuted patella fractures, there lacks an accepted surgical technique for these difficult cases. In this clinical series, we describe an enhancement to the traditional tension band construct that uses additional wires and multiple tension bands to gather and fix comminuted fracture patterns in nontransverse planes, bolster osteoporotic bone, and secure fractures in patients undergoing a revision and/or have potential to be poorly compliant with postoperative activity restrictions. The clinical outcomes of 27 patients demonstrate high rates of bony union, functional range of motion, and low rates of both infection and failure. In conclusion, using the basic principles of tension band wiring remains highly versatile, useful, and economical in approaching difficult patella fractures.

  19. Equilibrium states and stability of pre-tensioned adhesive tapes

    Directory of Open Access Journals (Sweden)

    Carmine Putignano

    2014-10-01

    Full Text Available In the present paper we propose a generalization of the model developed in Afferrante, L.; Carbone, G.; Demelio, G.; Pugno, N. Tribol. Lett. 2013, 52, 439–447 to take into account the effect of the pre-tension in the tape. A detailed analysis of the peeling process shows the existence of two possible detachment regimes: one being stable and the other being unstable, depending on the initial configuration of the tape. In the stability region, as the peeling process advances, the peeling angle reaches a limiting value, which only depends on the geometry, on the elastic modulus of the tape and on the surface energy of adhesion. Vice versa, in the unstable region, depending on the initial conditions of the system, the tape can evolve towards a state of complete detachment or fail before reaching a state of equilibrium with complete adhesion. We find that the presence of pre-tension in the tape does not modify the stability behavior of the system, but significantly affects the pull-off force which can be sustained by the tape before complete detachment. Moreover, above a critical value of the pre-tension, which depends on the surface energy of adhesion, the tape will tend to spontaneously detach from the substrate. In this case, an external force is necessary to avoid spontaneous detachment and make the tape adhering to the substrate.

  20. Liquid metal actuation by electrical control of interfacial tension

    Science.gov (United States)

    Eaker, Collin B.; Dickey, Michael D.

    2016-09-01

    By combining metallic electrical conductivity with low viscosity, liquid metals and liquid metal alloys offer new and exciting opportunities to serve as reconfigurable components of electronic, microfluidic, and electromagnetic devices. Here, we review the physics and applications of techniques that utilize voltage to manipulate the interfacial tension of liquid metals; such techniques include electrocapillarity, continuous electrowetting, electrowetting-on-dielectric, and electrochemistry. These techniques lower the interfacial tension between liquid metals and a surrounding electrolyte by driving charged species (or in the case of electrochemistry, chemical species) to the interface. The techniques are useful for manipulating and actuating liquid metals at sub-mm length scales where interfacial forces dominate. We focus on metals and alloys that are liquid near or below room temperature (mercury, gallium, and gallium-based alloys). The review includes discussion of mercury—despite its toxicity—because it has been utilized in numerous applications and it offers a way of introducing several phenomena without the complications associated with the oxide layer that forms on gallium and its alloys. The review focuses on the advantages, applications, opportunities, challenges, and limitations of utilizing voltage to control interfacial tension as a method to manipulate liquid metals.

  1. About the choice of tension for canvas paintings

    Directory of Open Access Journals (Sweden)

    Antonio Iaccarino Idelson

    2009-10-01

    Full Text Available The choice of the value of tension for a canvas painting is crucial for its future life, but tradition has handed us methods based on intuition that do not allow us comparing the results of different choices. Since the 1950es it is possible to measure the force used for stretching a painting, but this is very rarely done. This paper describes the evolution of the approach to the problem and points out the results of recent research and changes in attitude.Le choix de la valeur de tension pour une peinture sur toile est crucial pour sa future conservation, mais la tradition nous a transmis des méthodes fondées sur l’intuition qui ne nous permettent pas de comparer les effets des différents choix. Depuis les années 1950 il est possible de mesurer la force de tension choisie pour une peinture, mais ce la est fait très rarement. Cet article décrit l’évolution de l’approche à ce problème et souligne les résultats de récents recherches et changements d’attitude.      

  2. Inhomogeneous Deformation of Brain Tissue During Tension Tests

    CERN Document Server

    Rashid, Badar; Gilchrist, Michael D; 10.1016/j.commatsci.2012.05.030

    2013-01-01

    Mechanical characterization of brain tissue has been investigated extensively by various research groups over the past fifty years. These properties are particularly important for modelling Traumatic Brain Injury (TBI). In this research, we present the design and calibration of a High Rate Tension Device (HRTD) capable of performing tests up to a maximum strain rate of 90/s. We use experimental and numerical methods to investigate the effects of inhomogeneous deformation of porcine brain tissue during tension at different specimen thicknesses (4.0-14.0 mm), by performing tension tests at a strain rate of 30/s. One-term Ogden material parameters (mu = 4395.0 Pa, alpha = -2.8) were derived by performing an inverse finite element analysis to model all experimental data. A similar procedure was adopted to determine Young's modulus (E= 11200 Pa) of the linear elastic regime. Based on this analysis, brain specimens of aspect ratio (diameter/thickness) S < 1.0 are required to minimise the effects of inhomogeneous...

  3. Surface tension dominates insect flight on fluid interfaces.

    Science.gov (United States)

    Mukundarajan, Haripriya; Bardon, Thibaut C; Kim, Dong Hyun; Prakash, Manu

    2016-03-01

    Flight on the 2D air-water interface, with body weight supported by surface tension, is a unique locomotion strategy well adapted for the environmental niche on the surface of water. Although previously described in aquatic insects like stoneflies, the biomechanics of interfacial flight has never been analysed. Here, we report interfacial flight as an adapted behaviour in waterlily beetles (Galerucella nymphaeae) which are also dexterous airborne fliers. We present the first quantitative biomechanical model of interfacial flight in insects, uncovering an intricate interplay of capillary, aerodynamic and neuromuscular forces. We show that waterlily beetles use their tarsal claws to attach themselves to the interface, via a fluid contact line pinned at the claw. We investigate the kinematics of interfacial flight trajectories using high-speed imaging and construct a mathematical model describing the flight dynamics. Our results show that non-linear surface tension forces make interfacial flight energetically expensive compared with airborne flight at the relatively high speeds characteristic of waterlily beetles, and cause chaotic dynamics to arise naturally in these regimes. We identify the crucial roles of capillary-gravity wave drag and oscillatory surface tension forces which dominate interfacial flight, showing that the air-water interface presents a radically modified force landscape for flapping wing flight compared with air. © 2016. Published by The Company of Biologists Ltd.

  4. Precipitating and relieving factors of migraine versus tension type headache

    Directory of Open Access Journals (Sweden)

    Haque Badrul

    2012-08-01

    Full Text Available Abstract Background To determine the differences of precipitating and relieving factors between migraine and tension type headache. Methods This is a cross sectional study. We retrospectively reviewed the records of 250 migraine patients and 250 patients diagnosed as tension type headache from the specialized headache clinic in Dept. of Neurology, Dhaka Medical College Hospital. Data were collected through a predesigned questionnaire containing information on age, sex, social status and a predetermined list of precipitating and relieving factors. Results In this study, the female patients predominated (67%. Most of the patients were within 21–30 years age group (58.6%. About 58% of them belonged to middle class families. The common precipitating factors like stress, anxiety, activity, journey, reading, cold and warm were well distributed among both the migraine and tension type headache (TTH patients. But significant difference was demonstrated for fatigue (p  Conclusion The most frequent precipitating factors for headache appear to be identical for both migraine and TTH patients. Even though some factors like fatigue, sleep deprivation, sunlight and food significantly precipitate migraine and drug, massage are effective maneuver for relieving pain among migrianeurs.

  5. Precipitating and relieving factors of migraine versus tension type headache.

    Science.gov (United States)

    Haque, Badrul; Rahman, Kazi Mohibur; Hoque, Azharul; Hasan, A T M Hasibul; Chowdhury, Rajib Nayan; Khan, Sharif Uddin; Alam, Mondal Badrul; Habib, Mansur; Mohammad, Quazi Deen

    2012-08-25

    To determine the differences of precipitating and relieving factors between migraine and tension type headache. This is a cross sectional study. We retrospectively reviewed the records of 250 migraine patients and 250 patients diagnosed as tension type headache from the specialized headache clinic in Dept. of Neurology, Dhaka Medical College Hospital. Data were collected through a predesigned questionnaire containing information on age, sex, social status and a predetermined list of precipitating and relieving factors. In this study, the female patients predominated (67%). Most of the patients were within 21-30 years age group (58.6%). About 58% of them belonged to middle class families. The common precipitating factors like stress, anxiety, activity, journey, reading, cold and warm were well distributed among both the migraine and tension type headache (TTH) patients. But significant difference was demonstrated for fatigue (p sleep deprivation (p common among migraineurs. In consideration of relieving factors of pain, different maneuvers were commonly tried by migraineurs and significant difference were observed for both analgesic drug and massage (p sleep, rest and posture were used by both groups. The most frequent precipitating factors for headache appear to be identical for both migraine and TTH patients. Even though some factors like fatigue, sleep deprivation, sunlight and food significantly precipitate migraine and drug, massage are effective maneuver for relieving pain among migrianeurs.

  6. A micro surface tension pump (MISPU) in a glass microchip.

    Science.gov (United States)

    Peng, Xing Yue Larry

    2011-01-07

    A non-membrane micro surface tension pump (MISPU) was fabricated on a glass microchip by one-step glass etching. It needs no material other than glass and is driven by digital gas pressure. The MISPU can be seen working like a piston pump inside the glass microchip under a microscope. The design of the valves (MISVA) and pistons (MISTON) was based on the surface tension theory of the micro surface tension alveolus (MISTA). The digital gas pressure controls the moving gas-liquid interface to open or close the input and output MISVAs to refill or drive the MISTON for pumping a liquid. Without any moving parts, a MISPU is a kind of long-lasting micro pump for micro chips that does not lose its water pumping efficiency over a 20-day period. The volumetric pump output varied from 0 to 10 nl s(-1) when the pump cycle time decreased from 5 min to 15 s. The pump head pressure was 1 kPa.

  7. Tension Independence of Lipid Diffusion and Membrane Viscosity.

    Science.gov (United States)

    Thoms, Vincent L; Hormel, Tristan T; Reyer, Matthew A; Parthasarathy, Raghuveer

    2017-10-31

    The diffusion of biomolecules at lipid membranes is governed by the viscosity of the underlying two-dimensionally fluid lipid bilayer. For common three-dimensional fluids, viscosity can be modulated by hydrostatic pressure, and pressure-viscosity data have been measured for decades. Remarkably, the two-dimensional analogue of this relationship, the dependence of molecular mobility on tension, has to the best of our knowledge never been measured for lipid bilayers, limiting our understanding of cellular mechanotransduction as well as the fundamental fluid mechanics of membranes. Here we report both molecular-scale and mesoscopic measures of fluidity in giant lipid vesicles as a function of mechanical tension applied using micropipette aspiration. Both molecular-scale data, from fluorescence recovery after photobleaching, and micron-scale data, from tracking the diffusion of phase-separated domains, show a surprisingly weak dependence of viscosity on tension, in contrast to predictions of recent molecular dynamics simulations, highlighting fundamental gaps in our understanding of membrane fluidity.

  8. k-string tensions and the 1/N expansion

    CERN Document Server

    Greensite, Jeff; Patella, Agostino

    2011-01-01

    We address the question of whether the large-N expansion in pure SU(N) gauge theories requires that k-string tensions must have a power series expansion in 1/N^2, as in the sine law, or whether 1/N contributions are also allowable, as in Casimir scaling. We find that k-string tensions may, in fact, have 1/N corrections, and consistency with the large-N expansion in the open-string sector depends crucially on an exact cancellation, which we will prove, among terms involving odd powers of 1/N in particular combinations of Wilson loops. It is shown how these cancellations are fulfilled, and consistency with the large-N expansion achieved, in a concrete example, namely, strong-coupling lattice gauge theory with the heat-kernel action. This is a model which has both a 1/N^2 expansion and Casimir scaling of the k-string tensions. Analysis of the closed string channel in this model confirms our conclusions, and provides further insights into the large-N dependence of energy eigenstates and eigenvalues.

  9. Dynamic high-temperature Kolsky tension bar techniques

    Directory of Open Access Journals (Sweden)

    Song Bo

    2015-01-01

    Full Text Available Kolsky tension bar techniques were modified for dynamic high-temperature tensile characterization of thin-sheet alloys. An induction coil heater was used to heat the specimen while a cooling system was applied to keep the bars at room temperature during heating. A preload system was developed to generate a small pretension load in the bar system during heating in order to compensate for the effect of thermal expansion generated in the high-temperature tensile specimen. A laser system was applied to directly measure the displacements at both ends of the tensile specimen in order to calculate the strain in the specimen. A pair of high-sensitivity semiconductor strain gages was used to measure the weak transmitted force due to the low flow stress in the thin specimen at elevated temperatures. As an example, the high-temperature Kolsky tension bar was used to characterize a DOP-26 iridium alloy in high-strain-rate tension at 860 s−1/1030 ∘C.

  10. Dynamic high-temperature Kolsky tension bar techniques

    Science.gov (United States)

    Song, Bo; Nelson, Kevin; Lipinski, Ronald; Bignell, John; Ulrich, G. B.; George, E. P.

    2015-09-01

    Kolsky tension bar techniques were modified for dynamic high-temperature tensile characterization of thin-sheet alloys. An induction coil heater was used to heat the specimen while a cooling system was applied to keep the bars at room temperature during heating. A preload system was developed to generate a small pretension load in the bar system during heating in order to compensate for the effect of thermal expansion generated in the high-temperature tensile specimen. A laser system was applied to directly measure the displacements at both ends of the tensile specimen in order to calculate the strain in the specimen. A pair of high-sensitivity semiconductor strain gages was used to measure the weak transmitted force due to the low flow stress in the thin specimen at elevated temperatures. As an example, the high-temperature Kolsky tension bar was used to characterize a DOP-26 iridium alloy in high-strain-rate tension at 860 s-1/1030 ∘C.

  11. Instrumentation and monitoring of segmental post-tensioned girders

    Science.gov (United States)

    Gomez, Roberto; Escobar, J. Alberto; Guerrero, Hector

    2017-09-01

    As a result of the failure of prefabricated segmental girders during their construction, and in order to evaluate the structural safety of the superstructures of three bridges, different activities of instrumentation, monitoring and mathematical modelling were performed. This paper presents the first stage of a study describing the tasks of instrumentation and monitoring of stresses in an isolated precast post-tensioned beam during the process of application of the tension loading, and before being placed in its final position. The main goal of this task was to confirm the transmission and distribution of stresses at segmental joints. Also, ambient vibration tests were carried out in different phases of tensioning, as well as in the final position of the girder. Recorded stories of accelerations are presented and fundamental periods of vibrating of the isolated girder are derived. The results of the measurements will be used for the calibration of mathematical models and simulation of different scenarios of loads and thus assess the structural safety of the different sections of the superstructures of the three bridges in question.

  12. Control of a deareador level of a thermoelectric power station using modern control techniques; Control de nivel de un deareador de una central termoelectrica utilizando tecnicas de control moderno

    Energy Technology Data Exchange (ETDEWEB)

    Chavez Estrada, Jose Israel

    1997-01-01

    The present work shows the implementation of the scheme of predictive control IMC (Internal Model Control) in order to control the level of the deareador of a combined cycle thermoelectric power station of (C.C.T.S.). The implementation has the purpose of looking for alternative strategies of control to the classic ones (PID`s) that more efficiently control the variables of interest, in addition to getting into the new control techniques of control. Following the philosophy of predictive control IMC the form to applying this technique is shown, as well as the implementation of this type of controllers. A comparison of predictive control IMC is made with the scheme of conventional control (three control elements PID`s ) used at present to control the level of the deareador in the Combined Cycle Thermoelectric Power stations of Dos Bocas, Veracruz, Mexico and of Gomez Palacio, Durango, Mexico. [Espanol] El presente trabajo muestra la implementacion del esquema de control predictivo IMC (Control con Modelo Interno) con el objeto de controlar el nivel del deareador de una Central Termoelectrica de Ciclo Combinado (C.T.C.C.). La implementacion tiene la finalidad de buscar estrategias de control alternas a las clasicas (PID`s) que controlen mas eficientemente la variable de interes, ademas de incursionar en las nuevas tecnicas de control. Siguiendo la filosofia del control predictivo IMC se muestra la forma de aplicar esta tecnica, asi como la implementacion de este tipo de controladores. Se hace una comparacion del control predictivo IMC con el esquema de control convencional (control de tres elementos PID`s) utilizando actualmente para controlar el nivel del deareador en las centrales termoelectricas de ciclo combinado de Dos Bocas, Veracruz y de Gomez Palacio, Durango en Mexico.

  13. Influence of specimen type and reinforcement on measured tension-tension fatigue life of unidirectional GFRP laminates

    DEFF Research Database (Denmark)

    Korkiakoski, Samuli; Brøndsted, Povl; Sarlin, Essi

    2016-01-01

    in accordance with the ISO 527-5 standard and two slightly different dog-bone shaped specimens were evaluated by means of finite element modelling. Subsequent comparative fatigue tests were performed for the laminates with the three specimen types. The results showed that the test specimen type has......It is well known that standardised tension-tension fatigue test specimens of unidirectional (UD) glass-fibre-reinforced plastics (GFRP) laminates tend to fail at end tabs. The true fatigue life is then underestimated. The first objective of this study was to find for UD GFRP laminates a test...... specimen that fails in the gauge section. The second objective was to compare fatigue performance of two laminates, one having a newly developed UD powder-bound fabric as a reinforcement and the other having a quasi-UD stitched non-crimp fabric as a reinforcement. In the first phase, a rectangular specimen...

  14. Soil tension mediates isotope fractionation during soil water evaporation

    Science.gov (United States)

    Gaj, Marcel; McDonnell, Jeffrey

    2017-04-01

    Isotope tracing of the water cycle is increasing in its use and usefulness. Many new studies are extracting soil waters and relating these to streamflow, groundwater recharge and plant transpiration. Nevertheless, unlike isotope fractionation factors from open water bodies, soil water fractionation factors are poorly understood and until now, only empirically derived. In contrast to open water evaporation where temperature, humidity and vapor pressure gradient define fractionation (as codified in the well-known Craig and Gordon model), soil water evaporation includes additionally, fractionation by matrix effects. There is yet no physical explanation of kinetic and equilibrium fraction from soil water within the soil profile. Here we present a simple laboratory experiment with four admixtures of soil grain size (from sand to silt to clay). Oven-dried samples were spiked with water of known isotopic composition at different soil water contents. Soils were then stored in sealed bags and the headspace filled with dry air and allowed to equilibrate for 24hours. Isotopic analysis of the headspace vapor was done with a Los Gatos Inc. water vapor isotope analyzer. Soil water potential of subsamples were measured with a water potential meter. We show for the first time that soil tension controls isotope fractionation in the resident soil water. Below a Pf 3.5 the δ-values of 18O and 2H of the headspace vapor is more positive and increases with increasing soil water potential. Surprisingly, we find that the relationship between soil tension and equilibrium fractionation is independent of soil type. However, δ-values of each soil type plot along a distinct evaporation line. These results indicate that equilibrium fractionation is affected by soil tension in addition to temperature. Therefore, at high soil water tension (under dry conditions) equilibrium fractionation is not consistent with current empirical formulations that ignore these effects. These findings may have

  15. Experimental Study of Axially Tension Cold Formed Steel Channel Members

    Science.gov (United States)

    Apriani, Widya; Lubis, Fadrizal; Angraini, Muthia

    2017-12-01

    Experimental testing is commonly used as one of the steps to determine the cause of the collapse of a building structure. The collapse of structures can be due to low quality materials. Although material samples have passed laboratory tests and the existing technical specifications have been met but there may be undetected defects and known material after failure. In this paper will be presented Experimental Testing of Axially Tension Cold Formed Steel Channel Members to determine the cause of the collapse of a building roof truss x in Pekanbaru. Test of tensile strength material cold formed channel sections was performed to obtain the main characteristics of Cold Formed steel material, namely ultimate tensile strength loads that can be held by members and the yield stress possessed by channel sections used in construction. Analysis of axially tension cold formed steel channel section presents in this paper was conducted through experimental study based on specificationsAnnualBook of ASTM Standards: Metal Test methods and Analitical Procedures, Section 3 (1991). The result of capacity loads experimental test was compared with design based on SNI 03-7971-2013standard of Indonesia for the design of cold formed steel structural members. The results of the yield stress of the material will be seen against the minimum allowable allowable stress range. After the test, the percentace of ultimate axial tension capacity theory has a result that is 16.46% larger than the ultimate axial tension capacity experimental. When compared with the load that must be borne 5.673 kN/m it can be concluded that 2 specimens do not meet. Yield stress of member has fulfilled requirement that wass bigger than 550 MPa. Based on the curve obtained ultimate axial tension capacity theory, results greater than experimental. The greatest voltage value (fu) is achieved under the same conditions as its yield stress. For this specimen with a melting voltage value fy = 571.5068 MPa has fulfilled the

  16. Surface tension of ab initio liquid water at the water-air interface.

    Science.gov (United States)

    Nagata, Yuki; Ohto, Tatsuhiko; Bonn, Mischa; Kühne, Thomas D

    2016-05-28

    We report calculations on the surface tension of the water-air interface using ab initio molecular dynamics (AIMD) simulations. We investigate the influence of the cell size on surface tension of water from force field molecular dynamics simulations. We find that the calculated surface tension increases with increasing simulation cell size, thereby illustrating that a correction for finite size effects is essential for small systems that are customary in AIMD simulations. Moreover, AIMD simulations reveal that the use of a double-ζ basis set overestimates the experimentally measured surface tension due to the Pulay stress while more accurate triple and quadruple-ζ basis sets give converged results. We further demonstrate that van der Waals corrections critically affect the surface tension. AIMD simulations without the van der Waals correction substantially underestimate the surface tension while the van der Waals correction with the Grimme's D2 technique results in a value for the surface tension that is too high. The Grimme's D3 van der Waals correction provides a surface tension close to the experimental value. Whereas the specific choices for the van der Waals correction and basis sets critically affect the calculated surface tension, the surface tension is remarkably insensitive to the details of the exchange and correlation functionals, which highlights the impact of long-range interactions on the surface tension. Our simulated values provide important benchmarks, both for improving van der Waals corrections and AIMD simulations of aqueous interfaces.

  17. Tyrolean tensiometer: a new instrument for easy intraoperative tension measurement before vascular anastomosis.

    Science.gov (United States)

    Schubert, Heinrich M; Hohlrieder, Matthias; Buchegger, Johannes W; Brodbeck, Achim F; Hager, Martina; Zimmermann, Robert F; Moser, Thomas M

    2007-01-01

    In reconstructive surgery microsurgical repair of dissected arteries sometimes has to be done under longitudinal tension. Guidelines to support an objective decision on whether tension associated with direct suture is acceptable or whether grafting is needed, do not exist. All experimental data found concerned the clinical outcome of a certain length defect treated in various animal models. The aim of this study was to show the feasibility of a new instrument for measuring the tension required to adapt arterial stumps, thereby allowing surgical outcome to be assessed before beginning anastomosis. A modified tension spring balance was used to measure the force applied to the arterial stumps before knotting. Twenty-four rat femoral arteries were dissected, segments of up to 9mm were resected, and the tension needed for approximation was measured. These ex-vivo data were combined with clinical outcome data of previous animal trials. The tension measured increased proportionally to the size of the arterial gap created. The correlation between tension and arterial gap was found to be almost linear. The average additional time required for tension measurement using the Tyrolean Tensiometer was 13 (+/-6) s. High anastomotic tension may cause critical or even poor clinical outcome. None of the tension measurement methods described so far allow intraoperative measurement at a time when changes in strategy are still possible. The Tyrolean Tensiometer for the first time allows fast and reliable measurement of the tension acting on the first suture of an anastomosis.

  18. Surface Tension of Ab Initio Liquid Water at the Water-Air Interface

    CERN Document Server

    Nagata, Yuki; Bonn, Mischa; Kühne, Thomas D

    2016-01-01

    We report calculations of the surface tension of the water-air interface using ab initio molecular dynamics (AIMD) simulations. We investigate the simulation cell size dependence of the surface tension of water from force field molecular dynamics (MD) simulations, which show that the calculated surface tension increases with increasing simulation cell size, thereby illustrating that a correction for finite size effects is required for the small system used in the AIMD simulation. The AIMD simulations reveal that the double-{\\xi} basis set overestimates the experimentally measured surface tension due to the Pulay stress, while the triple and quadruple-{\\xi} basis sets give similar results. We further demonstrate that the van der Waals corrections critically affect the surface tension. AIMD simulations without the van der Waals correction substantially underestimate the surface tension, while van der Waals correction with the Grimme's D2 technique results in the value for the surface tension that is too high. T...

  19. Rein tension acceptance in young horses in a voluntary test situation.

    Science.gov (United States)

    Christensen, J W; Zharkikh, T L; Antoine, A; Malmkvist, J

    2011-03-01

    During riding, horses are frequently exposed to pressure from the rider, e.g. through the bit and reins, but few studies have investigated at which point rein tension becomes uncomfortable for the horse. To investigate how much rein tension young inexperienced horses are willing to accept in order to obtain a food reward; whether the tension acceptance changes during 3 consecutive test days; and whether rein tension correlates with the expression of conflict behaviour and heart rate. Pressure-naïve horses will apply only little rein tension in the first voluntary trial, but their acceptance will gradually increase. High levels of rein tension will lead to expression of conflict behaviour and increases in heart rate. Fifteen 2-year-old, bridle-naïve mares were encouraged to stretch their head forward (across a 0.95 m high metal bar) to obtain a food reward in a voluntary test situation. On each test day, each horse was exposed to 2 control sessions (loose reins), an intermediate and a short rein session (1 min/session). Rein tension, heart rate and behaviour were recorded. The horses applied significantly more tension on the first day (mean rein tension: 10.2 N), compared to the second and third test day (Day 2: 6.0 and Day 3: 5.7 N). The horses showed significantly more conflict behaviour in the short rein treatment. There was no treatment effect on heart rate. The horses applied the highest rein tension on the first day, and apparently learned to avoid the tension, rather than habituate to it. Rein tension correlated with expression of conflict behaviour, indicating that the horses found the tension aversive. Further studies should focus on the correlation between rein tension and conflict behaviour in ridden horses. © 2010 EVJ Ltd.

  20. Pericellular interphotoreceptor matrix dictates outer retina critical surface tension.

    Science.gov (United States)

    Gonzalez-Fernandez, Federico; Fornalik, Mark; Garlipp, Mary Alice; Gonzalez-Fernandez, Priscilla; Sung, Dongjin; Meyer, Anne; Baier, Robert

    2018-02-01

    Retinal detachments create two pathological surfaces, the surface of the outer neural retinal, and an apical retinal-pigmented epithelium (RPE) surface. The physicochemical properties of these two new surfaces are poorly understood. At a molecular level little is known how detachments form, how to optimize reattachment, or prevent extension of the detachment. A major limitation is lack of information about the biophysical consequences of the retina-RPE separation. The primary challenge is determining the molecular properties of the pathological interface surfaces. Here, using detached bovine retina, we show that this hurdle can be overcome through a combination of biophysical and ultrastructural approaches. The outer surface of freshly detached bovine neural retina, and isolated molecular components of the outer retina were subjected to: 1) Contact angle goniometry to determine the critical surface tension of the outer retinal surface, isolated insoluble interphotoreceptor matrix (IPM) and purified interphotoreceptor retinoid binding protein (IRBP); 2) Multiple attenuated internal reflectance infrared (MAIR-IR) spectroscopy was used to characterize the molecular composition of the retinal surface. MAIR-IR depth penetration was established through ellipsometric measurement of barium-stearate films. Light microscopy, immunohistochemistry and electron microscopy defined the structures probed spectroscopically. Furthermore, the data were correlated to IR spectra of docosahexaenoic acid, hyaluronan, chondroitin-6-sulfate and IRBP, and imaging by IR-microscopy. We found that the retinal critical surface tension is 24 mN/m, similar to isolated insoluble IPM and lower than IRBP. Barium-stearate calibration studies established that the MAIR-IR spectroscopy penetration depth was 0.2 μm. Ultrastructural observations and MAIR-IR studies of isolated outer retina components determined that the pericellular IPM coating the outer retinal surface is primarily responsible for

  1. On the surface tension and Zeta potential of electrolyte solutions.

    Science.gov (United States)

    Manciu, Marian; Manciu, Felicia S; Ruckenstein, Eli

    2017-06-01

    The distribution of ions in the vicinity of the air/water interface is still a matter of strong debate, with numerous calculations and experiments providing contradictory results, even regarding the preference of simple ions (such as H + and OH - ) for interfacial or bulk water. When short range interactions between ions and the interface are assumed independent of bulk concentrations, if they are compatible with the surface tension data, they underpredict the experimental Zeta potentials by orders of magnitude. If they are compatible with Zeta potential data, they are in strong disagreement with surface tension experiments. It is suggested that these observations might be a result of the relatively low number of interfacial water molecules available to hydrate the ions and the competition between various ions for adsorption sites. Therefore, whereas at low bulk concentrations, the Structure-Breaking ions prefer the interface, at sufficiently large bulk concentrations the surface adsorptions of these ions become saturated, and their interfacial concentrations may become lower than in the bulk. Consequently, the total interactions of ions with the interface can be strongly attractive at low bulk concentrations, and less attractive (or even repulsive), at high concentrations. To model this effect, the interactions between ions and interface are taken into account via modified Langmuir adsorption expressions for OH - and Cl - , while the H + ions are considered to be attached to any interfacial water molecule, even if the latter participate in the hydration of anions. The simple model of adsorption employed here is in agreement with both experiments on Zeta potential and on surface tension, and might reveal the conditions under which a given ion exhibits propensity for either the air/water interface, or for bulk water. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Sexuality, rights and personhood: tensions in a transnational world.

    Science.gov (United States)

    Siddiqi, Dina M

    2011-12-16

    This article discusses what happens when normative 'global' discourses of rights and individuated sexual identity confront the messiness of 'local' realities. It considers the tensions that emerge when the relationship between sexual and social identities is not obvious and the implications of such tensions for public health and sexual rights activism. These questions are addressed through debates over the naming of male-to-male sexualities and desires in the context of globalization and the growth of a large NGO (non-governmental organization) sector in urban Bangladesh. The material in the paper draws on a research project undertaken in 2008-9 in Dhaka, Bangladesh. A fundamental objective was to produce a contextualized understanding of sexuality in Dhaka city. Methods used included structured interviews, focus group discussions and informal conversations with a range of participants (students, factory workers, public health professionals and sexual minorities). The aim was to generate a conceptual and analytical framework around sexuality and rights rather than to undertake an empirical survey of any one population. As descriptors, globalized identity categories such as Men who have Sex with Men (MSM), used by public health providers, the state and donors; and gay/lesbian, invoked by human rights activists and transnational NGOs, are too narrow to capture the fluid and highly context-specific ways in which gender and sexually nonconforming persons understand themselves in Bangladesh. Further, class position mediates to a significant degree the reception, appropriation or rejection of transnational categories such as MSM and Lesbian, Gay, Bisexual, Transgender (LGBT). The tension is reflected in the sometimes fraught relations between service providers to MSM, the people they serve and an emerging group who identify as LGBT. A simple politics of recognition will be inadequate to the task of promoting health and human rights for all; such a strategy would

  3. Sexuality, rights and personhood: tensions in a transnational world

    Directory of Open Access Journals (Sweden)

    Siddiqi Dina M

    2011-12-01

    Full Text Available Abstract Background This article discusses what happens when normative ‘global’ discourses of rights and individuated sexual identity confront the messiness of ‘local’ realities. It considers the tensions that emerge when the relationship between sexual and social identities is not obvious and the implications of such tensions for public health and sexual rights activism. These questions are addressed through debates over the naming of male-to-male sexualities and desires in the context of globalization and the growth of a large NGO (non-governmental organization sector in urban Bangladesh. Methods The material in the paper draws on a research project undertaken in 2008-9 in Dhaka, Bangladesh. A fundamental objective was to produce a contextualized understanding of sexuality in Dhaka city. Methods used included structured interviews, focus group discussions and informal conversations with a range of participants (students, factory workers, public health professionals and sexual minorities. The aim was to generate a conceptual and analytical framework around sexuality and rights rather than to undertake an empirical survey of any one population. Results As descriptors, globalized identity categories such as Men who have Sex with Men (MSM, used by public health providers, the state and donors; and gay/lesbian, invoked by human rights activists and transnational NGOs, are too narrow to capture the fluid and highly context-specific ways in which gender and sexually nonconforming persons understand themselves in Bangladesh. Further, class position mediates to a significant degree the reception, appropriation or rejection of transnational categories such as MSM and Lesbian, Gay, Bisexual, Transgender (LGBT. The tension is reflected in the sometimes fraught relations between service providers to MSM, the people they serve and an emerging group who identify as LGBT. Conclusion A simple politics of recognition will be inadequate to the task of

  4. Growth factor involvement in tension-induced skeletal muscle growth

    Science.gov (United States)

    Vandenburgh, Herman H.

    1993-01-01

    Long-term manned space travel will require a better understanding of skeletal muscle atrophy which results from microgravity. Astronaut strength and dexterity must be maintained for normal mission operations and for emergency situations. Although exercise in space slows the rate of muscle loss, it does not prevent it. A biochemical understanding of how gravity/tension/exercise help to maintain muscle size by altering protein synthesis and/or degradation rate should ultimately allow pharmacological intervention to prevent muscle atrophy in microgravity. The overall objective is to examine some of the basic biochemical processes involved in tension-induced muscle growth. With an experimental in vitro system, the role of exogenous and endogenous muscle growth factors in mechanically stimulated muscle growth are examined. Differentiated avian skeletal myofibers can be 'exercised' in tissue culture using a newly developed dynamic mechanical cell stimulator device which simulates different muscle activity patterns. Patterns of mechanical activity which significantly affect muscle growth and metabolic characteristics were found. Both exogenous and endogenous growth factors are essential for tension-induced muscle growth. Exogenous growth factors found in serum, such as insulin, insulin-like growth factors, and steroids, are important regulators of muscle protein turnover rates and mechanically-induced muscle growth. Endogenous growth factors are synthesized and released into the culture medium when muscle cells are mechanically stimulated. At least one family of mechanically induced endogenous factors, the prostaglandins, help to regulate the rates of protein turnover in muscle cells. Endogenously synthesized IGF-1 is another. The interaction of muscle mechanical activity and these growth factors in the regulation of muscle protein turnover rates with our in vitro model system is studied.

  5. Oxygen tension during biofilm growth influences the efficacy antimicrobial agents

    Directory of Open Access Journals (Sweden)

    Raquel Pippi ANTONIAZZI

    Full Text Available Abstract Objective To compare the antimicrobial efficacy of a 0.12% chlorhexidine (CHX and herbal green tea (Camellia sinensis solution on established biofilms formed at different oxygen tensions in an in situ model. Method Twenty-five dental students were eligible for the study. In situ devices with standardized enamel specimens (ES facing the palatal and buccal sides were inserted in the mouths of volunteers for a 7 day period. No agent was applied during the first four days. From the fifth day onward, both agents were applied to the test ES group and no agent was applied to the control ES group. After 7 days the ES fragments were removed from the devices, sonicated, plated on agar, and incubated for 24 h at 37 °C to determine and quantify the colony forming units (CFUs. Result CHX had significantly higher efficacy compared to green tea on the buccal (1330 vs. 2170 CFU/µL and palatal (2250 vs. 2520 CFU/µL ES. In addition, intragroup comparisons showed significantly higher efficacy in buccal ES over palatal ES (1330 vs. 2250 CFU/µL for CHX and 2170 vs, 2520 CFU/µL for CV for both solutions. Analysis of the ES controls showed significantly higher biofilm formation in palatal ES compared to buccal ES. Conclusion CHX has higher efficacy than green tea on 4-day biofilms. The efficacy of both agents was reduced for biofilms grown in a low oxygen tension environment. Therefore, the oxygen tension environment seems to influence the efficacy of the tested agents.

  6. Biaxial shear/tension failure criteria of spectra single fibers

    Science.gov (United States)

    Sun, Jianzhuo

    An experimental study was conducted to develop the biaxial failure surface criteria of single Spectra 130d and 100d filaments in a torsion-tension environment. The cross-sectional profiles of single Spectra fibers were investigated using scanning electron microscopy and X-ray computed tomography. A pin-gripping method to fix the ends of a polyethylene single fiber was developed. Effects of pin diameter on failure stress for both Spectra 130d and 100d were characterized. It was found that the perturbed stress field effect can be neglected when the pin diameter is larger than 0.8 mm. Additionally, the effect of the sample's gage length on fiber tensile strength was investigated. The gage length of 5.5 mm was determined as an appropriate length for single fiber samples under stress-wave loading. A twisting apparatus was built for a single fiber to achieve specific degrees of shear strains. Quasi-static experiments were conducted using an MTS servo-hydraulic system to apply tensile loads on pre-twisted Spectra fibers. A tension Kolsky bar was employed to study the biaxial shear/tensile behavior of Spectra fibers at high strain rates. A decreasing trend of tensile strength, with increasing torsional strain, for Spectra fibers was observed. Furthermore, a torsional pendulum apparatus was developed to determine the torsional shear stresses in fibers at various levels of axial loading. The relationship between apparent shear stress and axial stress was discovered. Finally, a biaxial shear/tension failure criterion envelope of each of the Spectra fibers was established. Scanning electron microscopy images revealed the specific feature on the surface of twisted fibers and fracture surface of failure fibers.

  7. The Self as tension of wholeness and emptiness

    DEFF Research Database (Denmark)

    Tateo, Luca; marsico, giuseppina

    2013-01-01

    level semiotic instance, is the process that results of and regulates the uniqueness of the experience in irreversible time. The continuity of the stream of Self and the culturally codified ways of producing signs about the experience in the world are also discussed. The articles of de Souza, de Mattos......The article provides a framework of the Self, understood as a dynamic semiotic system in constant evolutive tension rather than a system in equilibrium adapting to the environmental changing conditions. The aim of the whole special issue is indeed to provide new hints for the reflection about...

  8. Properties of Refractory Concrete in Tension and Compression

    Science.gov (United States)

    Sampson, Jeffrey

    2009-01-01

    Refractory concrete on the LC-39A Flame Deflector has been damaged during multiple Space Shuttle launches (e.g. STS-124, STS-126, STS-119, and STS-125, STS-127). These events have prompted a better understanding of the system via an analytical model of the Flame Deflector assembly to include the Fondu Fyre refractory concrete. This model requires test data inputs of the refractory concrete's mechanical properties, which include stress versus strain curves in tension and compression, modulus of elasticity, and Poisson's ratio. Sections of Fondu Fyre refractory concrete removed from the LC-39A Flame Deflector were provided for this testing.

  9. Differentiating Leber Hereditary Optic Neuropathy from Normal-Tension Glaucoma.

    Science.gov (United States)

    Souto, Fernanda Maria Silveira; de Vasconcellos, José Paulo Cabral; de Melo, Mônica Barbosa; Sartorato, Edi Lúcia; Moura, Frederico Castelo

    2017-04-01

    Glaucoma is a neurodegenerative disorder characterized by thinning of neuroretinal rim, enlarged cup-to-disc ratio (CDR) and visual field damage. Although raised intraocular pressure is main risk factor for development of glaucoma, it can occur with consistently normal measurements in the intraocular pressure as normal tension glaucoma (NTG). Enlargement of CDR is a classical sign of glaucoma, but it can also result from non-glaucomatous optic neuropathies such as Leber hereditary optic neuropathy (LHON). We describe a case of LHON with increased CDR, discuss its differential diagnosis with NTG and highlight the reasons for misdiagnoses between these two entities.

  10. Surface tension of phenol-formaldehyde wood adhesives

    Science.gov (United States)

    C. -Y. Hse

    1972-01-01

    Thirty-six phenol (P) fermaldehyde (F) resins were formulated to complete a factorial arrangement: three NAOH/P molar ratios (0.4, 0.7, and 1.0), three solid contents (37, 40, and 43 percent), and four F/P molar rations (1.6, 1.9, 2.2, and 2.5). Surface tension ranged from 68.4 to 79.9 dynes/cm. and was affected most by NAOH/P ratio, next by F/P ratio, and least by...

  11. Central pain processing in chronic tension-type headache

    DEFF Research Database (Denmark)

    Lindelof, Kim; Ellrich, Jens; Jensen, Rigmor

    2009-01-01

    OBJECTIVE: Chronic tension-type headache (CTTH) affects 3% of the population. Directly and indirectly it causes high costs and considerable loss of quality of life. The mechanisms of this disorder are poorly understood and the treatment possibilities are therefore limited. The blink reflex (BR......) reflects neuronal excitability due to nociceptive input in the brainstem. The aim of this study was to investigate nociceptive processing at the level of the brainstem in an experimental pain model of CTTH symptoms. METHODS: The effect of conditioning pain, 5 min infusion of hypertonic saline into the neck...

  12. Gravitino/axino as decaying dark matter and cosmological tensions

    Directory of Open Access Journals (Sweden)

    Koichi Hamaguchi

    2017-09-01

    Full Text Available In supersymmetric axion models, if the gravitino or axino is the lightest SUSY particle (LSP, the other is often the next-to-LSP (NLSP. We investigate the cosmology of such a scenario and point out that the lifetime of the NLSP naturally becomes comparable to the present age of the universe in a viable parameter region. This is a well-motivated example of the so-called decaying dark matter model, which is recently considered as an extension of the ΛCDM model to relax some cosmological tensions.

  13. Patient goals after tension free vaginal tape operation

    DEFF Research Database (Denmark)

    Glavind, Karin; Bjørk, Jonna; Kousgaard, Sabrina Just

    INTRODUCTION: This prospective study investigates sexual function in women after a tension-free vaginal tape (TVT) operation and compares short-term and long-term effects. METHODS: Sixty-three women had a TVT operation performed at Aalborg University Hospital, Department of Gynecology...... negative emotional reactions during intercourse, less coital incontinence, and less fear of being incontinent during intercourse after the TVT operation. CONCLUSION: This study shows that a woman's sex life does not deteriorate after a TVT operation, that their sexual function improves somewhat...

  14. Tension Pneumothorax and Subcutaneous Emphysema Complicating Insertion of Nasogastric Tube

    Directory of Open Access Journals (Sweden)

    Narjis AL Saif

    2015-01-01

    Full Text Available Nasogastric tube has a key role in the management of substantial number of hospitalized patients particularly the critically ill. In spite of the apparent simple insertion technique, nasogastric tube placement has its serious perhaps fatal complications which need to be carefully assessed. Pulmonary misplacement and associated complications are commonplace during nasogastric tube procedure. We present a case of tension pneumothorax and massive surgical emphysema in critically ill ventilated patient due to inadvertent nasogastric tube insertion and also discussed the risk factors, complication list, and arrays of techniques for safer tube placement.

  15. Poder heterosexual y movimientos socio-sexuales: tensiones no resueltas

    OpenAIRE

    Granados Barco, Adriana

    2012-01-01

    Desde la década de 1980 feministas lesbianas, afro-americanas y latino-americanas, desarrollan planteamientos críticos en torno al racismo, clasismo e imposición heterosexual mantenido dentro del movimiento feminista anglo-europeo. Algunos de estos planteamientos conciben la heterosexualidad como una norma, un régimen político, una institución, y especialmente una ideología asentada sobre la diferencia sexual. Teniendo en cuenta estas críticas, el presente trabajo aborda las tensiones y las d...

  16. Efficacy of strength training on tension-type headache

    DEFF Research Database (Denmark)

    Madsen, Bjarne K; Søgaard, Karen; Andersen, Lars L

    2018-01-01

    Background Strength training has shown effects in reducing neck pain. As neck pain is highly prevalent in tension-type headache (TTH), it is relevant to examine the effect of strength training of the shoulder muscles on TTH patients. Aim To examine the effect of strength training of the shoulder....../neck muscles on TTH frequency and duration. Methods Sixty patients with TTH were randomised into strength training or a control group. The strength training group trained ten weeks with elastic resistance bands. The control group performed ergonomic and posture correction. Efficacy was evaluated at follow...

  17. C2-rational cubic spline involving tension parameters

    Indian Academy of Sciences (India)

    iИ1 ИfЕ122Y 128Ж; Е122Y 156Ж; Е150Y 184Ж; Е178Y 184Ж;. Е206Y 156Ж; Е206Y 128Ж; Е178Y 100Ж; Е150Y 100Ж;. Е122Y 72Ж; Е122Y 44Ж; Е150Y 16Ж; Е178Y 16Ж;. Е206Y 44Ж; Е206Y 72ЖgY we obtain the C2-rational cubic spline interpolant. Thus for different values of the tension parameters r and t, ...

  18. EDUCACION INTERCULTURAL EN AMERICA LATINA: DISTINTAS CONCEPCIONES Y TENSIONES ACTUALES

    OpenAIRE

    Ferrão Candau,Vera Maria

    2010-01-01

    La interculturalidad ha venido adquiriendo especial relevancia en América Latina, sobre todo a partir de los años noventa. El presente trabajo se ubica dentro de este contexto y forma parte de la investigación que venimos desarrollando desde 2006. Dar a conocer y discutir las tensiones presentes en el desarrollo de la educación intercultural en el continente constituye el foco del presente trabajo, el cual se estructura de la siguiente manera: en un primer momento presentaremos una breve sínt...

  19. Investigation of surface tension phenomena using the KC-135 aircraft

    Science.gov (United States)

    Alter, W. S.

    1982-01-01

    The microgravity environment of the KC-135 aircraft was utilized in three experiments designed to determine the following: (1) the feasibility of measuring critical wetting temperatures; (2) the effectiveness of surface tension as a means of keeping the cushioning heat transfer liquid in the furnace during ampoule translation; and (3) whether a non-wetting fluid would separate from the ampoule wall under low gravity conditions. This trio of investigations concerning surface phenomena demonstrates the effectiveness of the KC-135 as a microgravity research environment for small-scale, hand-held experiments.

  20. Surface tension driven shaping of adhesive microfluidic channel walls

    DEFF Research Database (Denmark)

    Janting, Jakob; Storm, Elisabeth K.; Geschke, Oliver

    2005-01-01

    The feasibility of making microfluidic channels with different wall geometries using adjacent lines of dispensed adhesive between substrates has been studied. Important parameters for the geometry have been identified to be: surface tension (adhesive / substrates), adhesive viscosity / thixotropy......, line height and distance, and temperature. Focus of the work has been on predicting the equilibrium geometries with FEM simulations using as input measured adhesive wetting angles, different adhesive line distances and height. The studied substrates are glass microscope slides, PEEK and PMMA....... The studied adhesives are DYMAX 9-20318-F, 3070, 9001 version 3.5, and Sylgard 184 PDMS....

  1. Numerical analysis of dynamic direct tension and direct compression tests

    Science.gov (United States)

    Tedesco, Joseph W.; Hughes, Mary L.; Oneil, Brian P.

    1993-01-01

    This report summarizes the results of a comprehensive numerical analysis of direct tension and direct compression tests of plain concrete performed at strain rates between 1 and 10 to the 2nd power on a Split Hopkinson Pressure Bar (SHPB). The objective of this study was to investigate failure mechanisms in plain concrete specimens at high strain rates. Both an elastic and inelastic concrete material model were employed in all numerical analyses. The modes of failure predicted by the numerical analyses are consistent with those observed in experimental studies. In all instances, the mode of failure was significantly influenced by the rate of loading.

  2. Magnetic Resonance Imaging in the evaluation of the pericardium. A pictorial essay; La Risonanza Magnetica nello studio del pericardio: tecnica di studio, anatomia e principali quadri patologici

    Energy Technology Data Exchange (ETDEWEB)

    Francone, Mario; Dymarkowski, Steven; Kalantzi, Maria; Bogaert, Jan [Katholieke Univ. Leuven, Leuven (Belgium). Department of Radiology

    2005-02-01

    spaziale e di contrasto e di una maggiore riproducibilita' dell'esame derivante dall'utilizzo di piani anatomici standard con significativa riduzione della dipendenza dell'operatore. La metodica diviene di utilita' fondamentale in tutti i casi in cui le informazioni ottenute con l'iniziale studio ecografico non siano sufficienti o risultino tecnicamente inadeguate: pazienti poco valutabili con ultrasuoni, piccole raccolte fluide in sede atipica, ispessimenti focali o masse sono usualmente ben individuate con maggiore accuratezza. La RM fornisce inoltre elementi diagnostici di grande utilita' per la diagnosi di pericardite costrittiva e per la differenziazione di questa condizione patologica della cardiomiopatia restrittiva. La RM fornisce inoltre elementi diagnostici di grande utilita' per la diagnosi di pericardite costrittiva e per la differenziazione di questa condizione patologica della cardiomiopatia restrittiva. La RM fornisce inoltre elementi diagnostici di grande utilita' per la diagnosi di pericardite costrittiva e per la differenziazione di questa condizione patologica della cardiomiopatia restrittiva. Scopo del presente lavoro e' di presentare il ruolo della RM nello studio del paziente con sospetta patologia del pericardio, illustrando la tecnica di studio, l'anatomia e i principali quadri patologici.

  3. Letteratura tecnica e formazione degli architetti ai tempi di Antonio Mollari / Technical literature and architects training in Antonio Mollari’s times

    Directory of Open Access Journals (Sweden)

    Alessandro Gambuti

    2014-04-01

    Full Text Available Nel corso del Settecento, nella letteratura tecnica, a seguito della critica razionalista del pensiero illuminista, cominciano a comparire principî scientifici per migliorare la formazione degli architetti. Nel 1764 Girolamo Fonda, matematico, pubblica gli Elementi di Architettura civile e militare e dedica la prima parte alla “Sodezza delle fabbriche”, premettendo le regole costruttive alla convenienza e all’estetica. Francesco Milizia avvia i Principj di Architettura civile (1781 con i temi della bellezza e della comodità, ma, nella terza parte, tratta della solidità con citazioni di meccanica, fisica e ingegneria. Qualche anno dopo (1788, Girolamo Masi stampa, per la “gioventù romana”, Teoria e Pratica dell’Architettura civile; seguendo il metodo del Fonda e continuando l’opera del Milizia egli propone nozioni sui materiali e sulle “resistenze” con il sussidio di illustrazioni e tabelle. Nel 1772 era stato ristampato il Manuale… di Giovanni Branca con la revisione di Leonardo de Vegni, dilettante di architettura; una notevole utilità didattica apportarono le incisioni di Giovan Battista Cipriani, allegate ai Principj… del Milizia (1800 e le Osservazioni ed aggiunte di Giovanni Antonio Antolini alla stessa opera (1817. All’inizio dell’Ottocento, l’Architettura pratica di Giuseppe Valadier dette un incremento alla formazione professionale degli architetti per mezzo di lezioni teoriche e disegni di procedimenti ed attrezzature per i costruttori di edifici. During the XVIIIth century, in the technical treatises, owing to the rationalist criticism of the Enlightenment movement, scientific principles begin to appear in order to improve the education of the architects. In 1764 Girolamo Fonda, a mathematician, publishes Elementi di Architettura civile e militare and gives up the first part to the “Solidity of Buildings”, putting before the construction rules to the convenience and beauty. Francesco Milizia opens

  4. Surface tension examination of various liquid oral, nasal, and ophthalmic dosage forms.

    Science.gov (United States)

    Han, Kimberly; Woghiren, Osakpolor E; Priefer, Ronny

    2016-01-01

    Surface tension at the surface-to-air interface is a physico-chemical property of liquid pharmaceutical formulations that are often overlooked. To determine if a trend between surface tension and route of administration exists, a suite of oral, nasal, and ophthalmic drug formulations were analyzed. The surface tension at the surface-to-air interface of the oral formulations studied were in or above the range of the surface tension of gastric, duodenum, and jejunum fluids. The range of surface tensions for oral formulations were 36.6-64.7 dynes/cm. Nasal formulations had surface tensions below that of the normal mucosal lining fluid with a range of 30.3-44.9 dynes/cm. Ophthalmic OTC formulations had the largest range of surface tensions at the surface-to-air interface of 34.3-70.9 dynes/cm; however, all formulations indicated for treatment of dry eye had surface tensions higher than that of normal tears, while those for treatment of red eye had surface tensions below. Therefore, surface tension at the surface-to-air interface of liquid formulations is dependent on the route of administration, environment at site of introduction, and for ophthalmics, what the formulation is indicated for.

  5. Association of muscle hardness with muscle tension dynamics: a physiological property.

    Science.gov (United States)

    Murayama, Mitsuyoshi; Watanabe, Kotaro; Kato, Ryoko; Uchiyama, Takanori; Yoneda, Tsugutake

    2012-01-01

    This study aimed to investigate the relationship between muscle hardness and muscle tension in terms of length-tension relationship. A frog gastrocnemius muscle sample was horizontally mounted on the base plate inside a chamber and was stretched from 100 to 150% of the pre-length, in 5% increments. After each step of muscle lengthening, electrical field stimulation for induction of tetanus was applied using platinum-plate electrodes positioned on either side of the muscle submerged in Ringer's solution. The measurement of muscle hardness, i.e., applying perpendicular distortion, was performed whilst maintaining the plateau of passive and tetanic tension. The relationship between normalised tension and normalised muscle hardness was evaluated. The length-hardness diagram could be created from the modification with the length-tension diagram. It is noteworthy that muscle hardness was proportional to passive and total tension. Regression analysis revealed a significant correlation between muscle hardness and passive and total tension, with a significant positive slope (passive tension: r = 0.986, P hardness depends on muscle tension in most ranges of muscle length in the length-tension diagram.

  6. Evaluation of tension stiffening effect on the crack width calculation of flexural RC members

    Directory of Open Access Journals (Sweden)

    Said M. Allam

    2013-06-01

    Full Text Available Building codes consider the tension stiffening when calculating the crack width of the flexural members. A simple analytical procedure is proposed for the determination of forces, stresses and strains acting on a reinforced concrete section subjected to flexure considering the concrete contribution in tension up to tensile concrete strain corresponding to the cracking strength of concrete. This analytical method gives the minimum value (lower bound of tension stiffening. Also, a commercial Finite Element Program (ABAQUS 2007 was used to perform non-linear analysis in order to evaluate the total contribution of the tensioned concrete in carrying loads which may be considered as the upper bound of tension stiffening. In addition, a comparison is carried out among the different codes using four reinforced concrete rectangular models to compare and evaluate the tension stiffening with proposed analytical lower bound tension stiffening and upper bound as obtained by ABAQUS. The models include different percentages of flexural steel ratio. The comparison revealed that the codes’ equations always consider tension stiffening lying between lower and upper bound of tension stiffening proposed in this study. Also, the study showed that the tension stiffening decreases with the increase of the percentage of the flexural reinforcement ratio.

  7. Effect of tendon tensioning: an in vitro study in porcine extensor tendons.

    Science.gov (United States)

    Figueroa, David; Calvo, Rafael; Vaisman, Alex; Meleán, Patricio; Figueroa, Francisco

    2010-06-01

    Graft tensioning is a controversial issue in anterior cruciate ligament reconstruction (ACLR) that has not achieved consensus between peers. The purpose of this study is to determine if after tensioning tendon length and resistance to maximal load changes. We performed an in vitro study with 50 porcine extensors tendons. The first group (P=25) was tensioned with 80 N (19.97 lb) for 10 min, using an ACL graft preparation board. The second group (C=25) was used as control and was not tensioned. The average initial (groups P and C) and post tensioning tendon length (group C) were measured; the average initial and post tensioning tendon diameter were measured as well. All samples were fixated in a tube-clamp system connected to a tension sensor. The samples were stressed with continuous and progressive tension until ultimate failure at maximum load (UFML) occurs. The initial mean length was: P before tensioning=13.4 mm+/-1.4 mm (range 10.5-16.5); P after tensioning=13.8 mm+/-1.4 mm (range 11.5-16.5); C=13 mm+/-1.35 mm (p=0.005). The mean diameter was: P=5.6 mm (4.5-6); C=5.5 mm (range 4.5-6) (p>0.05). The UFML was: P=189.7 N (114-336); C=229.9 N (143-365) (p=0.029). Tendon tensioning with 80 N for 10 min produced 3% average elongation. These could be beneficial in ACLR since tendon tensioning decreases elongation of the graft after fixation. Regardless, tendon tensioning is not innocuous since it diminishes their resistance when continuously stressed until complete failure occurs.

  8. Finite-Size and Solvent Dependent Line Tension Effects for Nanoparticles at the Air-Liquid Surface.

    Science.gov (United States)

    Matsubara, Hiroki; Otsuka, Jo; Law, Bruce M

    2018-01-09

    The line tension for a nanoparticle (NP) at the air-liquid surface can be determined by examining the variation in NP solution surface tension with bulk NP concentration. In this publication the variation in line tension with liquid solvent is examined for the homologous series of liquids from n-decane through to n-octadecane. Finite-size line tension effects are also studied by examining the variation in line tension with NP size for NPs at the air-octadecane surface. Both the line tension variation with solvent and NP size can be qualitatively explained using an interface displacement model for the line tension.

  9. Cyclic tensile response of a pre-tensioned polyurethane

    Science.gov (United States)

    Nie, Yizhou; Liao, Hangjie; Chen, Weinong W.

    2017-10-01

    In the research reported in this paper, we subject a polyurethane to uniaxial tensile loading at a quasi-static strain rate, a high strain rate and a jumping strain rate where the specimen is under quasi-static pre-tension and is further subjected to a dynamic cyclic loading using a modified Kolsky tension bar. The results obtained at the quasi-static and high strain rate clearly show that the mechanical response of this material is significantly rate sensitive. The rate-jumping experimental results show that the response of the material behavior is consistent before jumping. After jumping the stress-strain response of the material does not jump to the corresponding high-rate curve. Rather it approaches the high-rate curve asymptotically. A non-linear hyper-viscoelastic (NLHV) model, after having been calibrated by monotonic quasi-static and high-rate experimental results, was found to be capable of describing the material tensile behavior under such rate jumping conditions.

  10. Pressure-tension test for assessing fatigue in concrete

    Science.gov (United States)

    Soleimani, Sayed M.; Boyd, Andrew J.; Komar, Andrew J. K.

    2017-04-01

    In a pressure-tension test, a cylindrical concrete specimen is inserted into a cylindrical steel jacket, with a rubber ``O'' ring seal at each end to prevent gas leakage. Gas pressure is then applied to the curved surface of the concrete cylinder, leaving the ends free. As the gas pressure is increased, the specimen eventually fractures across a single plane transverse to the axis of the cylinder. The gas pressure at fracture may then be considered as the tensile strength of the concrete. In this study, the pressure-tension test is used to study fatigue in concrete. A total of 22 standard concrete cylinders (100 mm × 200 mm) were tested. Both dry and wet specimens have been studied. Low-cycle loading, which involves the application of a few load cycles at high stress levels - such as a concrete structure under earthquake load - has been used in this study. It was found that the concrete specimens in a low-cycle loading fail after only a few cycles of loading and interestingly at a stress level lower than the maximum value applied in the cyclic loading. In addition, non-destructive testing (NDT) was performed to determine the progressive damage due to tensile load in concrete cylinders using Ultrasonic Pulse Velocity (UPV). It was found that UPV can be used to evaluate the damage in concrete even after the application of a very low-level of tensile stress - as low as 10% of its tensile strength.

  11. Surface tension and quasi-emulsion of cavitation bubble cloud.

    Science.gov (United States)

    Bai, Lixin; Chen, Xiaoguang; Zhu, Gang; Xu, Weilin; Lin, Weijun; Wu, Pengfei; Li, Chao; Xu, Delong; Yan, Jiuchun

    2017-03-01

    A quasi-emulsion phenomenon of cavitation structure in a thin liquid layer (the thin liquid layer is trapped between a radiating surface and a hard reflector) is investigated experimentally with high-speed photography. The transformation from cloud-in-water (c/w) emulsion to water-in-cloud (w/c) emulsion is related to the increase of cavitation bubble cloud. The acoustic field in the thin liquid layer is analyzed. It is found that the liquid region has higher acoustic pressure than the cloud region. The bubbles are pushed from liquid region to cloud region by the primary Bjerknes forces. The rate of change of CSF increased with the increase of CSF. The cavitation bubbles on the surface of cavitation cloud are attracted by the cavitation bubbles inside the cloud due to secondary Bjerknes forces. The existence of surface tension on the interface of liquid region and cloud region is proved. The formation mechanism of disc-shaped liquid region and cloud region are analysed by surface tension and incompressibility of cavitation bubble cloud. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Synthetic Tracheal Mucus with Native Rheological and Surface Tension Properties

    Science.gov (United States)

    Hamed, R.; Fiegel, J.

    2016-01-01

    In this study the development of a model tracheal mucus with chemical composition and physical properties (bulk viscoelasticity and surface tension) matched to that of native tracheal mucus is described. The mucus mimetics were formulated using components that are abundant in tracheal mucus (glycoproteins, proteins, lipids, ions and water) at concentrations similar to those found natively. Pure solutions were unable to achieve the gel behavior observed with native mucus. The addition of a bi-functional crosslinking agent enabled control over the viscoelastic properties of the mucus mimetics by tailoring the concentration of the crosslinking agent and the duration of crosslinking. Three mucus mimetic formulations with different bulk viscoelastic properties, all within the normal range for non-diseased tracheal mucus, were chosen for investigation of surfactant spreading at the air-mimetic interface. Surfactant spread quickly and completely on the least viscoelastic mimetic surface, enabling the surface tension of the mimetic to be lowered to match native tracheal mucus. However, surfactant spreading on the more viscoelastic mimetics was hindered, suggesting that the bulk properties of the mimetics dictate the range of surface properties that can be achieved. PMID:23813841

  13. Takotsubo Cardiomyopathy in the Setting of Tension Pneumothorax

    Science.gov (United States)

    Gale, Michael; Mirrer, Brooks; Mallet, Thierry; Salciccioli, Louis; Petrie, Alison; Cohen, Ronny

    2015-01-01

    Background. Takotsubo cardiomyopathy is defined as a transient left ventricular dysfunction, usually accompanied by electrocardiographic changes. The literature documents only two other cases of Takotsubo cardiomyopathy in the latter setting. Methods. A 78-year-old female presented to the ED with severe shortness of breath, hypertension, and tachycardia. On physical exam, heart sounds (S1 and S2) were regular and wheezing was noticed bilaterally. We found laboratory results with a WBC of 20.0 (103/μL), troponin of 16.52 ng/mL, CK-mb of 70.6%, and BNP of 177 pg/mL. The patient was intubated for acute hypoxemic respiratory failure. A chest X-ray revealed a large left-sided tension pneumothorax. Initial echocardiogram showed apical ballooning with a LVEF of 10–15%. A cardiac angiography revealed normal coronary arteries with no coronary disease. After supportive treatment, the patient's condition improved with a subsequent echocardiogram showing a LVEF of 60%. Conclusion. The patient was found to have Takotsubo cardiomyopathy in the setting of a tension pneumothorax. The exact mechanisms of ventricular dysfunction have not been clarified. However, multivessel coronary spasm or catecholamine cardiotoxicity has been suggested to have a causative role. We suggest that, in our patient, left ventricular dysfunction was induced by the latter mechanism related to the stress associated with acute pneumothorax. PMID:26366307

  14. School and community relations in North America: Creative tensions

    Science.gov (United States)

    Loughran, E.; Reed, H. B.

    1980-09-01

    School and community relations in North America reflect creative tensions between the conserving forces of schooling and the changing forces of community. During crisis periods community development needs may modify the school's focus on individual learner growth, but generally schools use the community to extend and enrich the traditional modes. School and community interactions are chiefly characterized by such settings as community schools, community education, adult education, home and school (PTA) associations, work-study programs, curriculum-community resource programs. Recent social forces are creating heightened tensions: cultural pluralism, reduced resources, Third World influences, international conflicts, personal alienation, population concerns, energy problems, community power issues. These forces are gradually shifting school and community concepts towards ones of education and community. Education goes well beyond schooling, including all agencies having an organized influence on community development: libraries, voluntary groups, unions, business, human service agencies, government units, as well as schools. This shift requires research to develop nonformal concepts and practices, along with formal pedagogy, to increase the positive impacts of educational networks on community, as well as individual, development. These new directions have not yet significantly modified the traditional meaning of school and community relations.

  15. Choroidal Excavation in Eye with Normal Tension Glaucoma

    Directory of Open Access Journals (Sweden)

    Kazunobu Asao

    2014-05-01

    Full Text Available Purpose: To report the case of an eye with normal tension glaucoma and a choroidal excavation. Methods: This is an observational case report. Results: A 59-year-old woman with normal tension glaucoma had a choroidal excavation in the left eye. Her best-corrected visual acuity and intraocular pressure were within normal limits and had been stable for 5 years. Fundus examination showed a small white lesion inferior to the macula and a nerve fiber layer defect at the inferior edge of the optic disc. Humphrey Field Analyzer (HFA showed visual field defects corresponding to the nerve fiber layer defect with C30-2, and a central scotoma superior to the macula with C10-2. Optical coherence tomography (OCT showed a 150-µm deep choroidal excavation. Disruptions of the IS/OS line were detected only in the area inferior to the choroidal excavation. During the 5 months of follow-up, her best-corrected visual acuity remained at 1.0 and the IOP ranged from 12 to 14 mm Hg in the left eye. The fundus and OCT images did not deteriorate and the choroidal excavation did not enlarge. Conclusions: The disruption of the inner/outer segment (IS/OS line was detected only at the area surrounding the choroidal excavation. OCT examinations are useful in assessing the area of the residual IS/OS line, and HFA can be used to estimate the residual central visual field.

  16. Choroidal excavation in eye with normal tension glaucoma.

    Science.gov (United States)

    Asao, Kazunobu; Morimoto, Takeshi; Nakada, Atsuko; Kawasaki, Yoshimi

    2014-05-01

    To report the case of an eye with normal tension glaucoma and a choroidal excavation. This is an observational case report. A 59-year-old woman with normal tension glaucoma had a choroidal excavation in the left eye. Her best-corrected visual acuity and intraocular pressure were within normal limits and had been stable for 5 years. Fundus examination showed a small white lesion inferior to the macula and a nerve fiber layer defect at the inferior edge of the optic disc. Humphrey Field Analyzer (HFA) showed visual field defects corresponding to the nerve fiber layer defect with C30-2, and a central scotoma superior to the macula with C10-2. Optical coherence tomography (OCT) showed a 150-µm deep choroidal excavation. Disruptions of the IS/OS line were detected only in the area inferior to the choroidal excavation. During the 5 months of follow-up, her best-corrected visual acuity remained at 1.0 and the IOP ranged from 12 to 14 mm Hg in the left eye. The fundus and OCT images did not deteriorate and the choroidal excavation did not enlarge. The disruption of the inner/outer segment (IS/OS) line was detected only at the area surrounding the choroidal excavation. OCT examinations are useful in assessing the area of the residual IS/OS line, and HFA can be used to estimate the residual central visual field.

  17. Can interacting dark energy solve the H0 tension?

    Science.gov (United States)

    Di Valentino, Eleonora; Melchiorri, Alessandro; Mena, Olga

    2017-08-01

    The answer is yes. We indeed find that interacting dark energy can alleviate the current tension on the value of the Hubble constant H0 between the cosmic microwave background anisotropies constraints obtained from the Planck satellite and the recent direct measurements reported by Riess et al. 2016. The combination of these two data sets points toward a nonzero dark matter-dark energy coupling ξ at more than two standard deviations, with ξ =-0.2 6-0.12+0.16 at 95% C.L., i.e. with a moderate evidence for interacting dark energy with an odds ratio of 6 ∶1 respect to a non interacting cosmological constant. However the H0 tension is better solved when the equation of state of the interacting dark energy component is allowed to freely vary, with a phantomlike equation of state w =-1.185 ±0.064 (at 68% C.L.), ruling out the pure cosmological constant case, w =-1 , again at more than two standard deviations. When Planck data are combined with external datasets, as BAO, JLA Supernovae Ia luminosity distances, cosmic shear or lensing data, we find perfect consistency with the cosmological constant scenario and no compelling evidence for a dark matter-dark energy coupling.

  18. [Measurement of oxygen tension in normal and varicose vein walls].

    Science.gov (United States)

    Taccoen, A; Lebard, C; Borie, H; Poullain, J C; Zuccarelli, F; Gerentes, I; Stern, S; Guichard, M

    1996-01-01

    Oxygen tension (PO2) was investigated in vivo in the long saphenous vein from 21 varicose patients (31 veins) during venous surgery and 7 patients with normal venous network undergoing popliteo-femoral by-pass. Measurement was achieved using computerized polarographic system Kimoc 6650 (Eppendorf, Hamburg) providing a microdriven stepwise progression of a needle probe. Oxygen tension profile was similar in both groups of patients. A slow PO2 decrease was observed from adventitia up to the union of the middle and inner thirds of the media where values were at the lowest then followed by a marked increased in the intima and the saphenous lumen. Oxygenation of the two external thirds of the venous wall was provided by vasa vasorum. The average minimum values in the media was significantly reduced in varicose veins compared to no-varicose veins (7,9 mmHg versus 13,4 mmHg; p vein nutrition and suggest a primary or secondary deficiency in oxygen supply in varicose veins.

  19. Pulling force and surface tension drive membrane fusion.

    Science.gov (United States)

    Liu, Xuejuan; Tian, Falin; Yue, Tongtao; Zhang, Xianren; Zhong, Chongli

    2017-11-21

    Despite catalyzed by fusion proteins of quite different molecular architectures, intracellular, viral, and cell-to-cell fusions are found to have the essential common features and the nearly same nature of transition states. The similarity inspires us to find a more general catalysis mechanism for membrane fusion that minimally depends on the specific structures of fusion proteins. In this work, we built a minimal model for membrane fusion, and by using dissipative particle dynamics simulations, we propose a mechanism that the pulling force generated by fusion proteins initiates the fusion process and the membrane tension regulates the subsequent fusion stages. The model shows different features compared to previous computer simulation studies: the pulling force catalyzes membrane fusion through lipid head overcrowding in the contacting region, leading to an increase in the head-head repulsion and/or the unfavorable head-tail contacts from opposing membranes, both of which destabilize the contacting leaflets and thus promote membrane fusion or vesicle rupture. Our simulations produce a variety of shapes and intermediates, closely resembling cases seen experimentally. Our work strongly supports the view that the tight pulling mechanism is a conserved feature of fusion protein-mediated fusion and that the membrane tension plays an essential role in fusion.

  20. A High Rate Tension Device for Characterizing Brain Tissue

    CERN Document Server

    Rashid, Badar; Gilchrist, Michael; 10.1177/1754337112436900

    2013-01-01

    The mechanical characterization of brain tissue at high loading velocities is vital for understanding and modeling Traumatic Brain Injury (TBI). The most severe form of TBI is diffuse axonal injury (DAI) which involves damage to individual nerve cells (neurons). DAI in animals and humans occurs at strains > 10% and strain rates > 10/s. The mechanical properties of brain tissues at these strains and strain rates are of particular significance, as they can be used in finite element human head models to accurately predict brain injuries under different impact conditions. Existing conventional tensile testing machines can only achieve maximum loading velocities of 500 mm/min, whereas the Kolsky bar apparatus is more suitable for strain rates > 100/s. In this study, a custom-designed high rate tension device is developed and calibrated to estimate the mechanical properties of brain tissue in tension at strain rates < 90/s, while maintaining a uniform velocity. The range of strain can also be extended to 100% de...

  1. Takotsubo Cardiomyopathy in the Setting of Tension Pneumothorax

    Directory of Open Access Journals (Sweden)

    Michael Gale

    2015-01-01

    Full Text Available Background. Takotsubo cardiomyopathy is defined as a transient left ventricular dysfunction, usually accompanied by electrocardiographic changes. The literature documents only two other cases of Takotsubo cardiomyopathy in the latter setting. Methods. A 78-year-old female presented to the ED with severe shortness of breath, hypertension, and tachycardia. On physical exam, heart sounds (S1 and S2 were regular and wheezing was noticed bilaterally. We found laboratory results with a WBC of 20.0 (103/μL, troponin of 16.52 ng/mL, CK-mb of 70.6%, and BNP of 177 pg/mL. The patient was intubated for acute hypoxemic respiratory failure. A chest X-ray revealed a large left-sided tension pneumothorax. Initial echocardiogram showed apical ballooning with a LVEF of 10–15%. A cardiac angiography revealed normal coronary arteries with no coronary disease. After supportive treatment, the patient’s condition improved with a subsequent echocardiogram showing a LVEF of 60%. Conclusion. The patient was found to have Takotsubo cardiomyopathy in the setting of a tension pneumothorax. The exact mechanisms of ventricular dysfunction have not been clarified. However, multivessel coronary spasm or catecholamine cardiotoxicity has been suggested to have a causative role. We suggest that, in our patient, left ventricular dysfunction was induced by the latter mechanism related to the stress associated with acute pneumothorax.

  2. PBX 9502 Stockpile-Returned Hemi Tension Directionality Study

    Energy Technology Data Exchange (ETDEWEB)

    Gagliadi, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pease, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cunningham, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-02-23

    This work is a continuation of work started in FY12 to evaluate whether the coring direction in PBX 9502 main charges affects the mechanical properties data. In FY13 we performed the compression and thermal expansion portions of the testing.1 In FY14 we have performed the quasi-static tension and compressive creep parts of the study. This paper focuses on the tensile results while a companion paper details the compressive creep results.2 In an effort to obtain mechanical properties samples that would better characterize the density distribution within a main charge and, to a lesser extent, to more thoroughly describe the mechanical behavior of material that has been in the field for long period of time, the LLNL PBX 9502 Core Surveillance coring pattern had been changed between cycles 29 and 30. Where the orientation of the tensile and compression samples tested in surveillance prior to cycle 30 had been cored in the tangential direction, the new coring diagram has both the tension and compression samples being oriented in the hoop direction. Prior to this study, the authors were not aware of any work that systematically demonstrated the effect on tensile properties of samples cored in these distinct directions. The results from this study will inform us of if and how we should trend the data taken before and after the coring pattern change.

  3. Pulling force and surface tension drive membrane fusion

    Science.gov (United States)

    Liu, Xuejuan; Tian, Falin; Yue, Tongtao; Zhang, Xianren; Zhong, Chongli

    2017-11-01

    Despite catalyzed by fusion proteins of quite different molecular architectures, intracellular, viral, and cell-to-cell fusions are found to have the essential common features and the nearly same nature of transition states. The similarity inspires us to find a more general catalysis mechanism for membrane fusion that minimally depends on the specific structures of fusion proteins. In this work, we built a minimal model for membrane fusion, and by using dissipative particle dynamics simulations, we propose a mechanism that the pulling force generated by fusion proteins initiates the fusion process and the membrane tension regulates the subsequent fusion stages. The model shows different features compared to previous computer simulation studies: the pulling force catalyzes membrane fusion through lipid head overcrowding in the contacting region, leading to an increase in the head-head repulsion and/or the unfavorable head-tail contacts from opposing membranes, both of which destabilize the contacting leaflets and thus promote membrane fusion or vesicle rupture. Our simulations produce a variety of shapes and intermediates, closely resembling cases seen experimentally. Our work strongly supports the view that the tight pulling mechanism is a conserved feature of fusion protein-mediated fusion and that the membrane tension plays an essential role in fusion.

  4. Restraint of Liquid Jets by Surface Tension in Microgravity Modeled

    Science.gov (United States)

    Chato, David J.

    2001-01-01

    Tension in Microgravity Modeled Microgravity poses many challenges to the designer of spacecraft tanks. Chief among these are the lack of phase separation and the need to supply vapor-free liquid or liquidfree vapor to the spacecraft processes that require fluid. One of the principal problems of phase separation is the creation of liquid jets. A jet can be created by liquid filling, settling of the fluid to one end of the tank, or even closing a valve to stop the liquid flow. Anyone who has seen a fountain knows that jets occur in normal gravity also. However, in normal gravity, the gravity controls and restricts the jet flow. In microgravity, with gravity largely absent, jets must be contained by surface tension forces. Recent NASA experiments in microgravity (Tank Pressure Control Experiment, TPCE, and Vented Tank Pressure Experiment, VTRE) resulted in a wealth of data about jet behavior in microgravity. VTRE was surprising in that, although it contained a complex geometry of baffles and vanes, the limit on liquid inflow was the emergence of a liquid jet from the top of the vane structure. Clearly understanding the restraint of liquid jets by surface tension is key to managing fluids in low gravity. To model this phenomenon, we need a numerical method that can track the fluid motion and the surface tension forces. The fluid motion is modeled with the Navier-Stokes equation formulated for low-speed incompressible flows. The quantities of velocity and pressure are placed on a staggered grid, with velocity being tracked at cell faces and pressure at cell centers. The free surface is tracked via the introduction of a color function that tracks liquid as 1/2 and gas as -1/2. A phase model developed by Jacqmin is used. This model converts the discrete surface tension force into a barrier function that peaks at the free surface and decays rapidly. Previous attempts at this formulation have been criticized for smearing the interface. However, by sharpening the phase

  5. A wireless smart sensor network for automated monitoring of cable tension

    Science.gov (United States)

    Sim, Sung-Han; Li, Jian; Jo, Hongki; Park, Jong-Woong; Cho, Soojin; Spencer, Billie F., Jr.; Jung, Hyung-Jo

    2014-02-01

    As cables are primary load carrying members in cable-stayed bridges, monitoring the tension forces of the cables provides valuable information regarding structural soundness. Incorporating wireless smart sensors with vibration-based tension estimation methods provides an efficient means of autonomous long-term monitoring of cable tensions. This study develops a wireless cable tension monitoring system using MEMSIC’s Imote2 smart sensors. The monitoring system features autonomous operation, sustainable energy harvesting and power consumption, and remote access using the internet. To obtain the tension force, an in-network data processing strategy associated with the vibration-based tension estimation method is implemented on the Imote2-based sensor network, significantly reducing the wireless data transmission and the power consumption. The proposed monitoring system has been deployed and validated on the Jindo Bridge, a cable-stayed bridge located in South Korea.

  6. Line tension and reduction of apparent contact angle associated with electric double layers

    CERN Document Server

    Dörr, Aaron

    2014-01-01

    The line tension of an electrolyte wetting a non-polar substrate is computed analytically and numerically. The results show that, depending on the value of the apparent contact angle, positive or negative line tension values may be obtained. Furthermore, a significant difference between Young's contact angle and the apparent contact angle measured several Debye lengths remote from the three-phase contact line occurs. When applying the results to water wetting highly charged surfaces, line tension values of the same order of magnitude as found in recent experiments can be achieved. Therefore, the theory presented may contribute to the understanding of line tension measurements and points to the importance of the electrostatic line tension. Being strongly dependent on the interfacial charge density, electrostatic line tension is found to be tunable via the pH value of the involved electrolyte. As a practical consequence, the stability of nanoparticles adsorbed at fluid-fluid interfaces is predicted to be depend...

  7. Local deformation method for measuring element tension in space deployable structures

    Directory of Open Access Journals (Sweden)

    Belov Sergey

    2017-01-01

    Full Text Available The article describes the local deformation method to determine the tension of cord and thin membrane elements in space deployable structure as antenna reflector. Possible measuring instrument model, analytical and numerical solutions and experimental results are presented. The boundary effects on measurement results of metallic mesh reflector surface tension are estimated. The study case depicting non-uniform reflector surface tension is considered.

  8. Rheological and restoring force models regarding belt tensioner dymamic behavior: prediction and experiment

    OpenAIRE

    Bastien, Jérome; Michon, Guilhem; Manin, Lionel; Dufour, Regis

    2006-01-01

    The objective of this paper is to compare the Masing and modified Dahl model efficiency regarding the prediction of the hysteretic behavior of a belt tensioner used for automotive engines. A first experimental study with deflection imposed on the tensioner is carried out to identify hysteresis loop parameters for the two models. The models are then implemented in the general motion equations modeling the behavior of a belt - tensioner - mass system. The comparison beteen numerical and experim...

  9. Carbonic anhydrase inhibition increases retinal oxygen tension and dilates retinal vessels

    DEFF Research Database (Denmark)

    Pedersen, Daniella Bach; Koch Jensen, Peter; la Cour, Morten

    2005-01-01

    Carbonic anhydrase inhibitors (CAIs) increase blood flow in the brain and probably also in the optic nerve and retina. Additionally they elevate the oxygen tension in the optic nerve in the pig. We propose that they also raise the oxygen tension in the retina. We studied the oxygen tension...... in the pig retina and optic nerve before and after dorzolamide injection. Also the retinal vessel diameters during carbonic anhydrase inhibition were studied....

  10. Pre-tension generates strongly reversible adhesion of a spatula pad on substrate

    OpenAIRE

    Chen, Bin; Wu, Peidong; Gao, Huajian

    2008-01-01

    Motivated by recent studies on reversible adhesion mechanisms of geckos and insects, we investigate the effect of pre-tension on the orientation-dependent adhesion strength of an elastic tape adhering on a substrate. Our analysis shows that the pre-tension can significantly increase the peel-off force at small peeling angles while decreasing it at large peeling angles, leading to a strongly reversible adhesion. More interestingly, we find that there exists a critical value of pre-tension beyo...

  11. Surface tension in human pathophysiology and its application as a medical diagnostic tool.

    Science.gov (United States)

    Fathi-Azarbayjani, Anahita; Jouyban, Abolghasem

    2015-01-01

    Pathological features of disease appear to be quite different. Despite this diversity, the common feature of various disorders underlies physicochemical and biochemical factors such as surface tension. Human biological fluids comprise various proteins and phospholipids which are capable of adsorption at fluid interfaces and play a vital role in the physiological function of human organs. Surface tension of body fluids correlates directly to the development of pathological states. In this review, the variety of human diseases mediated by the surface tension changes of biological phenomena and the failure of biological fluids to remain in their native state are discussed. Dynamic surface tension measurements of human biological fluids depend on various parameters such as sex, age and changes during pregnancy or certain disease. It is expected that studies of surface tension behavior of human biological fluids will provide additional information and might become useful in medical practice. Theoretical background on surface tension measurement and surface tension values of reference fluids obtained from healthy and sick patients are depicted. It is well accepted that no single biomarker will be effective in clinical diagnosis. The surface tension measurement combined with routine lab tests may be a novel non-invasive method which can not only facilitate the discovery of diagnostic models for various diseases and its severity, but also be a useful tool for monitoring treatment efficacy. We therefore expect that studies of surface tension behavior of human biological fluids will provide additional useful information in medical practice.

  12. Anemonia sulcata toxin (ATX II) enhances spontaneous electrical activity and tension in chronically denervated rat diaphragm.

    Science.gov (United States)

    Ravens, U; Wiese, R

    1985-09-01

    In isolated strips of rat diaphragm denervated 9-21 days prior to experimentation, spontaneous action potentials were recorded extracellularly and twitch and resting tension were measured. The sea anemone toxin ATX II enhances the occurrence of spontaneous action potentials, increases resting tension and depresses twitch tension. These effects are essentially irreversible. In low sodium solution substituted with sucrose the effects of ATX II are attenuated, however, they fully develop upon return to normal sodium solution with a marked transient increase in the incidence of spontaneous action potentials and in resting tension. ATX II remains uneffective after pretreatment with tetrodotoxin. Reelevation of the extracellular sodium concentration after exposure to low sodium solution per se causes a marked increase in occurrence of fibrillation potentials, however the transient increase in resting tension was much smaller than in the presence of ATX II. Substitution of chloride with the impermeable anion methylsulphate enhances spontaneous activity and resting tension without an effect on twitch tension. Addition of ATX II elevates resting tension although the concomitant further increase in incidence of spontaneous action potentials is small. It is concluded that the increase in resting tension reflects a summation of the fibrillatory activity, but fibrillations become more effective when the preparations are exposed to ATX II. This finding points at the possible rôle of sodium ions in excitation contraction coupling of denervated skeletal muscle.

  13. Porous micropillar structures for retaining low surface tension liquids.

    Science.gov (United States)

    Agonafer, Damena D; Lee, Hyoungsoon; Vasquez, Pablo A; Won, Yoonjin; Jung, Ki Wook; Lingamneni, Srilakshmi; Ma, Binjian; Shan, Li; Shuai, Shuai; Du, Zichen; Maitra, Tanmoy; Palko, James W; Goodson, Kenneth E

    2018-03-15

    The ability to manipulate fluid interfaces, e.g., to retain liquid behind or within porous structures, can be beneficial in multiple applications, including microfluidics, biochemical analysis, and the thermal management of electronic systems. While there are a variety of strategies for controlling the disposition of liquid water via capillarity, such as the use of chemically modified porous adhesive structures and capillary stop valves or surface geometric features, methods that work well for low surface tension liquids are far more difficult to implement. This study demonstrates the microfabrication of a silicon membrane that can retain exceptionally low surface tension fluorinated liquids against a significant pressure difference across the membrane via an array of porous micropillar structures. The membrane uses capillary forces along the triple phase contact line to maintain stable liquid menisci that yield positive working Laplace pressures. The micropillars have inner diameters and thicknesses of 1.5-3 μm and ∼1 μm, respectively, sustaining Laplace pressures up to 39 kPa for water and 9 kPa for Fluorinert™ (FC-40). A theoretical model for predicting the change in pressure as the liquid advances along the porous micropillar structure is derived based on a free energy analysis of the liquid meniscus with capped spherical geometry. The theoretical prediction was found to overestimate the burst pressure compared with the experimental measurements. To elucidate this deviation, transient numerical simulations based on the Volume of Fluid (VOF) were performed to explore the liquid pressure and evolution of meniscus shape under different flow rates (i.e., Capillary numbers). The results from VOF simulations reveal strong dynamic effects where the anisotropic expansion of liquid along the outer micropillar edge leads to an irregular meniscus shape before the liquid spills along the micropillar edge. These findings suggest that the analytical prediction

  14. Determination of interfacial tension of binary mixtures from perturbative approaches

    Science.gov (United States)

    Martínez-Ruiz, F. J.; Blas, F. J.

    2015-05-01

    We determine the interfacial properties of mixtures of spherical Lennard-Jones molecules from direct simulation of the vapour-liquid interface. We consider mixtures with same molecular size but different dispersive energy parameter values. We use the extensions of the improved version of the inhomogeneous long-range corrections of Janeček, presented recently by MacDowell and Blas and Martínez-Ruiz et al., to deal with the interaction energy and microscopic components of the pressure tensor. We have performed Monte Carlo simulations in the canonical ensemble to obtain the interfacial properties of mixtures of Lennard-Jones molecules with a cut-off distance rc = 3σ in combination with the inhomogeneous long-range corrections. The pressure tensor is obtained using the mechanical (virial) and thermodynamic route. The vapour-liquid interfacial tension is also evaluated using three different procedures, the Irving-Kirkwood method, the difference between the macroscopic components of the pressure tensor, and the test-area methodology. This allows to check the validity of the recent extensions presented to deal with the contributions due to long-range corrections for intermolecular energy and pressure tensor in the case of binary mixtures. In addition to the pressure tensor and the surface tension, we also obtain density profiles, coexistence densities, and interfacial thickness as functions of pressure, at a given temperature. According to our results, the main effect of increasing the ratio between the dispersive energy parameters of the mixture, ε22/ε11, is to sharpen the vapour-liquid interface and to increase the width of the biphasic coexistence region. Particularly interesting is the presence of a relative maximum in the density profiles of the less volatile component at the interface. This maximum is related with adsorption or accumulation of these molecules at the interface, a direct consequence of stronger attractive interactions between these molecules in

  15. Adjusting of the power-factor correction. Technical, economic and financial implications; Calculo de correccion del factor de potencia. Implicaciones tecnicas, economicas y financieras

    Energy Technology Data Exchange (ETDEWEB)

    Eficiencia Energetica aplicada (Energiza) [Ciudad Juarez, Chihuahua (Mexico)

    2005-07-01

    A power-factor is a device formed by a dielectric set and electrodes within a container with terminals, able to contribute with capacitance to an electrical circuit, such as: transformers, induction motors, regulators, air conditioning, welding machines, induction furnaces and ballasts. This document also tells us about the location of capacitors in their system, the electrical conductor, the monthly consumption electricity bill, of the benefits when adjusting the power-factor, the liberation of power of the transformer, the reduction of current in feeders, the reduction of losses in feeders, the diminution of the tension fall and the approximate average sale price. [Spanish] Un factor de potencia es un dispositivo formado por un conjunto de dielectrico y electrodos dentro de un recipiente con terminales, capaz de aportar capacitancia a un circuito electrico, como lo son: transformadores, motores de induccion, reguladores, aire acondicionado, maquinas soldadoras, hornos de induccion y balastros. Este documento tambien nos habla acerca de la localizacion de capacitores en su sistema, del conductor electrico, del recibo de consumo mensual de energia, de los beneficios al corregir factor de potencia, la liberacion de potencia del transformador, la reduccion de corriente en alimentadores, la reduccion de perdidas en alimentadores, la disminucion de la caida de tension y el precio de venta promedio aproximado.

  16. Sparcity techniques in of load flow studies and three-phase short circuit for unbalanced distribution systems; Tecnicas de esparcidad en estudios de flujos de carga y corto circuito trifasico para sistemas desbalanceados de distribucion

    Energy Technology Data Exchange (ETDEWEB)

    Flores Lopez, Arturo

    1997-07-01

    computacional que permitira a los Ingenieros poder realizar una planeacion mas eficiente del Sistema de Distribucion. El modelo SYSTEM, permite realizar el estudio de Flujos de Carga y Corto Circuito Trifasico en alimentadores desbalanceados del Sistema de Distribucion considerando la instalacion en la red de bancos de capacitores y reguladores de voltaje. El estudio de Flujos de Carga se realiza utilizando el metodo de Gauss Seidel por medio de la matriz Ybus utilizando factorizacion LU y Tecnicas de Esparcidad. El estudio del Corto Circuito Trifasico se realiza por medio del metodo nodal utilizando la matriz Zbus y Tecnicas de Esparcidad.

  17. Surface tension and stability of foams based of keratin hydrolyzate

    Directory of Open Access Journals (Sweden)

    Zhanar Ospanova

    2015-03-01

    Full Text Available The protein obtained in the alkali hydrolysis consist of amino acid residues that are natural macromolecular surfactants and they can may be used as effective foam stabilizers. The features of dynamic surface tension and stability of foams on based of aqueous solutions of keratin hydrolyzate in a concentration range of 1-10% were studied. The relaxation time – of the adsorption layers of keratin hydrolyzate is equaled to 10-12 min. The parameters of adsorption at the liquid – gas interface were defined. The maximum surface activity, foaming and foam stability corresponds to a neutral pH close to isoelectric state of the protein. Increase the foam stability at pH ~ 7 proceeds due to the conformational changes of macro-molecules of the protein at the interface liquid – gas, forming particles of colloidal size, clogging channels Plateau-Gibbs and preventing expiration of the liquid film between.

  18. The essential tension competition, cooperation and multilevel selection in evolution

    CERN Document Server

    Bahar, Sonya

    2018-01-01

    'The Essential Tension' explores how agents that naturally compete come to act together as a group. The author argues that the controversial concept of multilevel selection is essential to biological evolution, a proposition set to stimulate new debate. The idea of one collective unit emerging from the cooperative interactions of its constituent (and mutually competitive) parts has its roots in the ancient world. More recently, it has illuminated studies of animal behavior, and played a controversial role in evolutionary biology. In Part I, the author explores the historical development of the idea of a collectivity in biological systems, from early speculations on the sociology of human crowd behavior, through the mid-twentieth century debates over the role of group selection in evolution, to the notion of the selfish gene. Part II investigates the balance between competition and cooperation in a range of contemporary biological problems, from flocking and swarming to experimental evolution and the evolutio...

  19. Tension-dependent Free Energies of Nucleosome Unwrapping

    CERN Document Server

    Lequieu, Joshua; Schwartz, David C; de Pablo, Juan J

    2016-01-01

    Nucleosomes form the basic unit of compaction within eukaryotic genomes and their locations represent an important, yet poorly understood, mechanism of genetic regulation. Quantifying the strength of interactions within the nucleosome is a central problem in biophysics and is critical to understanding how nucleosome positions influence gene expression. By comparing to single-molecule experiments, we demonstrate that a coarse-grained molecular model of the nucleosome can reproduce key aspects of nucleosome unwrapping. Using detailed simulations of DNA and histone proteins, we calculate the tension-dependent free energy surface corresponding to the unwrapping process. The model reproduces quantitatively the forces required to unwrap the nucleosome, and reveals the role played by electrostatic interactions during this process. We then demonstrate that histone modifications and DNA sequence can have significant effects on the energies of nucleosome formation. Most notably, we show that histone tails are crucial f...

  20. A longitudinal observation of a patient with normal tension glaucoma

    Directory of Open Access Journals (Sweden)

    Hlupheka L. Sithole

    2017-01-01

    Full Text Available Normal tension glaucoma (NTG is a disease associated with normal intraocular pressure (10 mmHg – 21 mmHg that may lead to irreversible blindness if misdiagnosed or left untreated over a period of time. The author observed a patient with NTG over a period of 5 years (from 2013 to 2017. The initial visual field analysis results (2014 showed mild visual field defects because of NTG at the start of the 5-year period. Although the patient was also diagnosed with hydrocephalus, a condition associated with optic nerve head damage, following years of noncompliance to treatment of NTG and follow-up eye examination schedules, the patient’s visual field defects were found to have progressed by the year 2017. It is therefore important for optometrists to apply due diligence when examining patients with NTG in order to expedite intervention and prevention of visual impairment and blindness.

  1. Effects of Thermal Tension Transients on the Muscle Crossbridge

    Science.gov (United States)

    Greene, Peter R.

    2016-09-01

    The transverse thermal fluctuations of the myosin molecule are significant. This paper explores the contribution of lateral myosin bending to the developed crossbridge force and power stroke. The equipartition theorem is used to calculate the mode amplitudes for myosin bending. Crossbridge axial force Fx and power stroke Δx are developed by transverse in-plane fluctuations along the y- and z-axes. Practical applications include the effects of temperature on the flexibility of the myosin molecule stiffness and tension, relevant to man-made fabrication of synthetic muscle using micromachines and nanowires. Scaling laws for the S2 bending amplitude depend on filament length, mode number, and stiffness, as n-2,L2, and (EI)-1. This paper quantifies the effects of thermal motion on the mechanics of miniature molecular motors, including the muscle crossbridge.

  2. Une société sous tension

    OpenAIRE

    Morel, Alain

    2003-01-01

    Dans la société rurale picarde les rapports de force mettent aux prises tout autant les ouvriers agricoles qui ne sont pas sûrs de trouver un travail ni de le garder, qu'adversaires de classes. Le climat de tension qui règne dans les fermes résulte tout d'abord de la forte pression exercée par un patron-fermier qui dispose d'une force de violence sociale faisant de lui le maître du sort de chacun. Il s'explique aussi par la compétition entre ouvriers disposés à se distinguer au regard ...

  3. Ultrasonic assessment of tension shear strength in resistance spot welding

    Science.gov (United States)

    Moghanizadeh, Abbas

    2015-05-01

    Resistance spot welding is extensively used to join sheet steel in the automotive industry. Ultrasonic non-destructive techniques for evaluation of the mechanical properties of resistance spot welding are presented. The aim of this study is to develop the capability of the ultrasonic techniques as an efficient tool in the assessment of the welding characterization. Previous researches have indicated that the measurements of ultrasonic attenuation are sensitive to grain- size variations in an extensive range of metallic alloys. Other researchers have frequently described grain sizes which are able to have significant effects on the physical characteristics of the material. This research provides a novel method to estimate the tension-shear strengths of the resistance spot welding directly from the ultrasonic attenuation measurements. The effects of spot welding parameters on the ultrasonic waves are further investigated. The results confirm that it is possible to determine the spot welding parameters for individual quality by using ultrasonic test.

  4. Innovative Concrete Repairing Technique Using Post Tensioning Steel Straps

    Directory of Open Access Journals (Sweden)

    Ma Chau-Khun

    2017-01-01

    Full Text Available In this paper, innovative technique using low-cost recycled steel straps confinement to repair load-induced damaged high-strength concrete (HSC columns were studied. This paper explains the effects of repairing technique using post tensioning steel straps. A series of experimental test was carried out to investigate the stress-strain relationships of such concrete. A total of 6 HSC columns were compressed 50% of their ultimate strength, then repaired by using steel straps. The proposed repairing technique significantly improved the performance of damaged concrete columns, in both strength and ductility. It was evidenced from this study that the steel strapping confining technique is effective in repairing of damaged HSC columns but ensured reasonable operating costs.

  5. Use of capsular tension ring in phacoemulsification. indications and technique

    Directory of Open Access Journals (Sweden)

    Lanzetta Paolo

    2002-01-01

    Full Text Available The capsular tension ring (CTR was originally introduced to reinforce the zonule in eyes with zonular dehiscence and to prevent capsular phimosis in eyes at risk for postoperative capsular shrinkage. Since then, other designs and applications have been developed and described. Modified CTRs with shields can be used in eyes with iris coloboma. A CTR with loops is intended for scleral fixation. Studies are underway to determine if the presence of the CTR helps avoid or limit capsular opacification. A number of different insertion techniques with the aid of manipulators, injectors and traction sutures have been described. We have developed a technique that is particularly effective in cases of zonular dehiscence due to its low solicitation to the damaged bag.

  6. Places of memory: between tension, participation and reflection

    Directory of Open Access Journals (Sweden)

    Yaneth Mora Hernández

    2013-11-01

    Full Text Available The Places of memory reflect the thoughts that certain societies make about their past and how this is represented. These places are cut by a set of political and ideological tensions that determine what is remembered and what is forgotten and depending on what we remember. Museums, memory centers and memorials are the spaces that have allowed us to localize the memory and turn the recent past into a living document for learning and reflection. These places have been possible thanks to the collective, systematic and conscientious work, of victims and human rights organizations, who, from their actions, have allowed the lessons of the past to guide our present and future.

  7. Phytoremediation techniques; Tecnicas de fitorremediacion

    Energy Technology Data Exchange (ETDEWEB)

    Bonilla, A.; Urzelai, A.; Bartolome, I.; Cagigal, E. [Unidad de Medio Ambiente. Bilbao (Spain)

    2000-07-01

    The ground pollution by heavy metals is a problem is a problem widely spreaded in the majority of the industrialised countries. Therefore, areas with high concentration of heavy metals in their ground are often associated with the areas in which mining activities have been developed and areas highly industrialised. This situation implies a deficient ecosystem behaviour. (Author)

  8. Reflections on the Historiography of American Eugenics: Trends, Fractures, Tensions.

    Science.gov (United States)

    Paul, Diane B

    2016-12-01

    By the 1950s, eugenics had lost its scientific status; it now belonged to the context rather than to the content of science. Interest in the subject was also at low ebb. But that situation would soon change dramatically. Indeed, in an essay-review published in 1993, Philip Pauly commented that a "eugenics industry" had come to rival the "Darwin industry" in importance, although the former seemed less integrated than the latter. Since then, the pace of publication on eugenics, including American eugenics, has only accelerated, while the field has become even more fractured, moving in multiple and even contradictory directions. This essay explores the trajectory of work on the history of American eugenics since interest in the subject revived in the 1960s, noting trends and also fractures. The latter are seen to result partly from the fact that professional historians no longer own the subject, which has attracted the interest of scholars in several other disciplines as well as scientists, political activists, and journalists, and also from the fact that the history of eugenics has almost always been policy-oriented. Historians' desire to be policy-relevant and at the same time attentive to context, complexity, and contingency has generated tensions at several levels: within individuals, among historians, and between professional historians and others who also engage with the history of eugenics. That these tensions are resolved differently by different authors and even by the same authors at different times helps explain why the fragmentation that Pauly noted is not likely to be overcome anytime soon.

  9. Fast neutron spectroscopy with tensioned metastable fluid detectors

    Energy Technology Data Exchange (ETDEWEB)

    Grimes, T.F.; Taleyarkhan, R.P., E-mail: rusi@purdue.edu

    2016-09-11

    This paper describes research into development of a rapid-turnaround, neutron-spectroscopy capable (gamma-beta blind), high intrinsic efficiency sensor system utilizing the tensioned metastable fluid detector (TMFD) architecture. The inability of prevailing theoretical models (developed successfully for the classical bubble chamber) to adequately predict detection thresholds for tensioned metastable fluid conditions is described. Techniques are presented to overcome these inherent shortcomings, leading thereafter, to allow successful neutron spectroscopy using TMFDs – via the newly developed Single Atom Spectroscopy (SAS) approach. SAS also allows for a unique means for rapidly determining neutron energy thresholds with TMFDs. This is accomplished by simplifying the problem of determining Cavitation Detection Events (CDEs) arising from neutron interactions with one in which several recoiling atom species contribute to CDEs, to one in which only one dominant recoil atom need be considered. The chosen fluid is Heptane (C{sub 7}H{sub 16}) for which only recoiling C atoms contribute to CDEs. Using the SAS approach, the threshold curve for Heptane was derived using isotope neutron source data, and then validated against experiments with mono-energetic (2.45/14 MeV) neutrons from D-D and D-T accelerators. Thereafter the threshold curves were used to produce the response matrix for various geometries. The response matrices were in turn combined with experimental data to recover the continuous spectra of fission (Cf-252) and (α,n) Pu–Be isotopic neutron sources via an unfolding algorithm. A generalized algorithm is also presented for performing neutron spectroscopy using any other TMFD fluid that meets the SAS approach assumptions.

  10. Freezing shortens the lifetime of DNA molecules under tension.

    Science.gov (United States)

    Chung, Wei-Ju; Cui, Yujia; Chen, Chi-Shuo; Wei, Wesley H; Chang, Rong-Shing; Shu, Wun-Yi; Hsu, Ian C

    2017-12-01

    DNA samples are commonly frozen for storage. However, freezing can compromise the integrity of DNA molecules. Considering the wide applications of DNA molecules in nanotechnology, changes to DNA integrity at the molecular level may cause undesirable outcomes. However, the effects of freezing on DNA integrity have not been fully explored. To investigate the impact of freezing on DNA integrity, samples of frozen and non-frozen bacteriophage lambda DNA were studied using optical tweezers. Tension (5-35 pN) was applied to DNA molecules to mimic mechanical interactions between DNA and other biomolecules. The integrity of the DNA molecules was evaluated by measuring the time taken for single DNA molecules to break under tension. Mean lifetimes were determined by maximum likelihood estimates and variances were obtained through bootstrapping simulations. Under 5 pN of force, the mean lifetime of frozen samples is 44.3 min with 95% confidence interval (CI) between 36.7 min and 53.6 min while the mean lifetime of non-frozen samples is 133.2 min (95% CI: 97.8-190.1 min). Under 15 pN of force, the mean lifetimes are 10.8 min (95% CI: 7.6-12.6 min) and 78.5 min (95% CI: 58.1-108.9 min). The lifetimes of frozen DNA molecules are significantly reduced, implying that freezing compromises DNA integrity. Moreover, we found that the reduced DNA structural integrity cannot be restored using regular ligation process. These results indicate that freezing can alter the structural integrity of the DNA molecules.

  11. Influence of passive muscle tension on electromechanical delay in humans.

    Directory of Open Access Journals (Sweden)

    Lilian Lacourpaille

    Full Text Available BACKGROUND: Electromechanical delay is the time lag between onsets of muscle activation and muscle force production and reflects both electro-chemical processes and mechanical processes. The aims of the present study were two-fold: to experimentally determine the slack length of each head of the biceps brachii using elastography and to determine the influence of the length of biceps brachii on electromechanical delay and its electro-chemical/mechanical processes using very high frame rate ultrasound. METHODS/RESULTS: First, 12 participants performed two passive stretches to evaluate the change in passive tension for each head of the biceps brachii. Then, they underwent two electrically evoked contractions from 120 to 20° of elbow flexion (0°: full extension, with the echographic probe maintained over the muscle belly and the myotendinous junction of biceps brachii. The slack length was found to occur at 95.5 ± 6.3° and 95.3 ± 8.2° of the elbow joint angle for the long and short heads of the biceps brachii, respectively. The electromechanical delay was significantly longer at 120° (16.9 ± 3.1 ms; p0.95. CONCLUSION: In contrast to previous observations on gastrocnemius medialis, the onset of muscle motion and the onset of myotendinous junction motion occurred simultaneously regardless of the length of the biceps brachii. That suggests that the between-muscles differences reported in the literature cannot be explained by different muscle passive tension but instead may be attributable to muscle architectural differences.

  12. Cracks dynamics under tensional stress - a DEM approach

    Science.gov (United States)

    Debski, Wojciech; Klejment, Piotr; Kosmala, Alicja; Foltyn, Natalia; Szpindler, Maciej

    2017-04-01

    Breaking and fragmentation of solid materials is an extremely complex process involving scales ranging from an atomic scale (breaking inter-atomic bounds) up to thousands of kilometers in case of catastrophic earthquakes (in energy scale it ranges from single eV up to 1024 J). Such a large scale span of breaking processes opens lot of questions like, for example, scaling of breaking processes, existence of factors controlling final size of broken area, existence of precursors, dynamics of fragmentation, to name a few. The classical approach to study breaking process at seismological scales, i.e., physical processes in earthquake foci, is essentially based on two factors: seismic data (mostly) and the continuum mechanics (including the linear fracture mechanics). Such approach has been gratefully successful in developing kinematic (first) and dynamic (recently) models of seismic rupture and explaining many of earthquake features observed all around the globe. However, such approach will sooner or latter face a limitation due to a limited information content of seismic data and inherit limitations of the fracture mechanics principles. A way of avoiding this expected limitation is turning an attention towards a well established in physics method of computational simulations - a powerful branch of contemporary physics. In this presentation we discuss preliminary results of analysis of fracturing dynamics under external tensional forces using the Discrete Element Method approach. We demonstrate that even under a very simplified tensional conditions, the fragmentation dynamics is a very complex process, including multi-fracturing, spontaneous fracture generation and healing, etc. We also emphasis a role of material heterogeneity on the fragmentation process.

  13. Fast neutron spectroscopy with tensioned metastable fluid detectors

    Science.gov (United States)

    Grimes, T. F.; Taleyarkhan, R. P.

    2016-09-01

    This paper describes research into development of a rapid-turnaround, neutron-spectroscopy capable (gamma-beta blind), high intrinsic efficiency sensor system utilizing the tensioned metastable fluid detector (TMFD) architecture. The inability of prevailing theoretical models (developed successfully for the classical bubble chamber) to adequately predict detection thresholds for tensioned metastable fluid conditions is described. Techniques are presented to overcome these inherent shortcomings, leading thereafter, to allow successful neutron spectroscopy using TMFDs - via the newly developed Single Atom Spectroscopy (SAS) approach. SAS also allows for a unique means for rapidly determining neutron energy thresholds with TMFDs. This is accomplished by simplifying the problem of determining Cavitation Detection Events (CDEs) arising from neutron interactions with one in which several recoiling atom species contribute to CDEs, to one in which only one dominant recoil atom need be considered. The chosen fluid is Heptane (C7H16) for which only recoiling C atoms contribute to CDEs. Using the SAS approach, the threshold curve for Heptane was derived using isotope neutron source data, and then validated against experiments with mono-energetic (2.45/14 MeV) neutrons from D-D and D-T accelerators. Thereafter the threshold curves were used to produce the response matrix for various geometries. The response matrices were in turn combined with experimental data to recover the continuous spectra of fission (Cf-252) and (α,n) Pu-Be isotopic neutron sources via an unfolding algorithm. A generalized algorithm is also presented for performing neutron spectroscopy using any other TMFD fluid that meets the SAS approach assumptions.

  14. The full spectrum of physiological oxygen tensions and step-changes in oxygen tension affects the neural differentiation of mouse embryonic stem cells.

    Science.gov (United States)

    Mondragon-Teran, Paul; Baboo, Jasmin Z; Mason, Chris; Lye, Gary J; Veraitch, Farlan S

    2011-01-01

    The beneficial impact of lowering oxygen tension to physiological levels has been demonstrated in a number of stem cell differentiation protocols. The majority of these studies compare normal laboratory oxygen tension with one physiological condition (typically 2-5% O(2) ). In this article, we investigated whether the full spectrum of physiological oxygen tensions (0-20% O(2) ) and step-changes in oxygen tension could enhance the production of neural populations from of embryonic stem cells (ESCs). We used a model system for the conversion of mouse ESCs into cells expressing one neuroectoderm stem cell marker (nestin) and two neural markers (βIII tubulin and microtubule-associated protein (MAP2)). 4-10% O(2) was associated with large increases in the total production of viable cells and the highest number of cells expressing Nestin, βIII tubulin, and MAP2. However, 4-10% O(2) also caused a reduction in the percentage of cells expressing all three markers. Step changes in oxygen tension at the mid-point of the differentiation process affected the total production of viable cells and the percentage of cells expressing all three markers. We found that the initial oxygen tension and the magnitude of the step-change were critical variables. A step increase from 0 to 2% O(2) mid-way through the protocol resulted in the highest percentage of cells expressing βIII tubulin (86.5%). In conclusion, we have demonstrated that the full spectrum of physiological oxygen tensions and step changes in oxygen tension represent a powerful tool for the optimisation of neural differentiation processes. Copyright © 2011 American Institute of Chemical Engineers (AIChE).

  15. Genetic Variants Associated With Different Risks for High Tension Glaucoma and Normal Tension Glaucoma in a Chinese Population.

    Science.gov (United States)

    Chen, Yuhong; Hughes, Guy; Chen, Xueli; Qian, Shaohong; Cao, Wenjun; Wang, Li; Wang, Min; Sun, Xinghuai

    2015-04-01

    We investigated the association of genetic factors with primary open angle glaucoma (POAG), including high tension glaucoma (HTG) and normal tension glaucoma (NTG), in a Han Chinese population. We recruited 1157 POAG cases, including 860 HTG and 297 NTG, and 934 normal controls. A total of 13 previously reported single nucleotide polymorphisms (SNPs) located at four gene regions (TMCO1, CDKN2B-AS1, ATOH7, and SIX1/SIX6) was genotyped. Distributions of allele frequencies were compared between cases and controls as well as in the HTG and NTG subgroups. The IOP, vertical cup-to-disc ratio (VCDR), central corneal thickness (CCT), axial length (AL), and age at diagnosis also were investigated as quantitative phenotypes with genotypes of these SNPs. The SNPs rs4656461 and rs7555523 at TMCO1, rs523096 and rs2157719 at CDKN2B-AS1, as well as rs33912345 and rs10483727 at SIX1/SIX6 showed statistically significant association with POAG. The SNPs at ATOH7 did not show statistically significant association with POAG in our dataset. In the subgroup analysis of HTG and NTG, multiple variants at CDKN2B-AS1 and SIX1/SIX6 showed stronger association with NTG than HTG. The SNPs rs523096 and rs2157719 at CDKN2B-AS1 as well as rs33912345 and rs10483727 at SIX1/SIX6 were found to be associated with IOP where the minor alleles were associated with an increase in IOP. In contrast, SNPs at TMCO1 showed significant association with HTG only. Genetic variants in CDKN2B-AS1, SIX1/SIX6, and TMCO1 were associated with POAG in a Han Chinese population. Genes CDKN2B-AS1 and SIX1/SIX6 seem to harbor a tendency toward POAG with lower IOP, while carriers of risk alleles at TMCO1 seem to be predisposed to developing POAG with higher IOP.

  16. [Method of customized analysis of tension deformities in fixed dental restorations].

    Science.gov (United States)

    Losev, S A; Riakhovskiĭ, A N; Egorov, G P; Chernen'kiĭ, M M

    2013-01-01

    The paper presents the technique for transporting CT and CAD 3D-modelling data in software for tension deformities analysis with the possibility for customizing physical properties of certain anatomical structures and constructive materials. The obtained data allowed performing analyzing of tension deformities of dental restorations in ANSYS software.

  17. What Is "Good" Research? Revealing the Paradigmatic Tensions in Quantitative Criticalist Work

    Science.gov (United States)

    Hernández, Ebelia

    2014-01-01

    If quantitative criticalism is thought to be a bridge between positivist epistemologies prevalent in quantitative work and social constructionism often found in critical qualitative work, then this bridge is fraught with challenges and tensions. This chapter examines the methodological issues, questions, and tensions that emerged from a research…

  18. Rein tension acceptance in young horses in a voluntary test situation

    DEFF Research Database (Denmark)

    Christensen, Janne Winther; zharkikh, T.L.; Antoine, A.

    2011-01-01

    Reasons for performing the study: During riding, horses are frequently exposed to pressure from the rider, e.g. through the bit and reins, but few studies have investigated at which point rein tension becomes uncomfortable for the horse. Objectives: To investigate how much rein tension young...

  19. Mapping surface tension induced menisci with application to tensiometry and refractometry.

    Science.gov (United States)

    Mishra, Avanish; Kulkarni, Varun; Khor, Jian-Wei; Wereley, Steve

    2015-07-28

    In this work, we discuss an optical method for measuring surface tension induced menisci. The principle of measurement is based upon the change in the background pattern produced by the curvature of the meniscus acting as a lens. We measure the meniscus profile over an inclined glass plate and utilize the measured meniscus for estimation of surface tension and refractive index.

  20. Application of a pull on a disk method to measure surface tension of liquids.

    Science.gov (United States)

    Carvalho, Thiago C; Horng, Michelle; McConville, Jason T

    2012-03-01

    The intrinsic property of liquids is a vital indicator of formulation performance and stability. Therefore, investigation of the interfacial phenomenon of surface tension is a routine procedure in the development of products in a wide variety of areas including foods, pharmaceuticals, cosmetics, and painting technologies. We hypothesize that studies related to the maximum pull on a rod can be extrapolated to disk geometry and applied to measure surface tension using a texture analyzer. A glass disk probe was attached to the arm of a texture analyzer and pulled from the liquid surface. The maximum force of detachment was used to calculate surface tension extrapolating from the theory of maximum pull on a rod. The surface tension of water, ethanol, and a hydroalcoholic solution was measured and compared with literature values to validate this hypothesis. The calculated values of surface tension for the liquids studied were within 5% of the reported values. Probe diameter appears to have an important role on surface tension accuracy compared with literature values. Slight discrepancies can be attributed to temperature control and leveling of liquid surface, although still in accordance with the reported values of surface tension measured using different methods. This study presents a simple, precise, and quick method to determine the surface tension of liquids from the maximum pull on a disk. Further studies are warranted to determine the optimum glass disk probe diameter for better accuracy.

  1. Prediction of viscosities and surface tensions of fuels using a new corresponding states model

    DEFF Research Database (Denmark)

    Queimada, A.J.; Rolo, L.I.; Caco, A.I.

    2006-01-01

    While some properties of diesels are cheap, easy and fast to measure, such as densities, others such as surface tensions and viscosities are expensive and time consuming. A new approach that uses some basic information such as densities to predict viscosities and surface tensions is here proposed...

  2. Achieving tunable surface tension in the pseudopotential lattice Boltzmann modeling of multiphase flows.

    Science.gov (United States)

    Li, Qing; Luo, K H

    2013-11-01

    In this paper, we aim to address an important issue about the pseudopotential lattice Boltzmann (LB) model, which has attracted much attention as a mesoscopic model for simulating interfacial dynamics of complex fluids, but suffers from the problem that the surface tension cannot be tuned independently of the density ratio. In the literature, a multirange potential was devised to adjust the surface tension [Sbragaglia et al., Phys. Rev. E 75, 026702 (2007)]. However, it was recently found that the density ratio of the system will be changed when the multirange potential is employed to adjust the surface tension. An alternative approach is therefore proposed in the present work. The basic strategy is to add a source term to the LB equation so as to tune the surface tension of the pseudopotential LB model. The proposed approach can guarantee that the adjustment of the surface tension does not affect the mechanical stability condition of the pseudopotential LB model, and thus provides a separate control of the surface tension and the density ratio. Meanwhile, it still retains the mesoscopic feature and the computational simplicity of the pseudopotential LB model. Numerical simulations are carried out for stationary droplets, capillary waves, and droplet splashing on a thin liquid film. The numerical results demonstrate that the proposed approach is capable of achieving a tunable surface tension over a very wide range and can keep the density ratio unchanged when adjusting the surface tension.

  3. The influence of gradients in surface tension on the mass transfer in gas liquid systems

    NARCIS (Netherlands)

    Klooster, Hubertus Willem van der

    1978-01-01

    In this investigation attention has been paid to the influence of surface tensions gradients on the performance of a packed column. From earlier investigations it is known that surface tensions have a considerable influence on the magnitude of the effective interfacial area. The work presented here

  4. A novel optimal sensitivity design scheme for yarn tension sensor using surface acoustic wave device.

    Science.gov (United States)

    Lei, Bingbing; Lu, Wenke; Zhu, Changchun; Liu, Qinghong; Zhang, Haoxin

    2014-08-01

    In this paper, we propose a novel optimal sensitivity design scheme for the yarn tension sensor using surface acoustic wave (SAW) device. In order to obtain the best sensitivity, the regression model between the size of the SAW yarn tension sensor substrate and the sensitivity of the SAW yarn tension sensor was established using the least square method. The model was validated too. Through analyzing the correspondence between the regression function monotonicity and its partial derivative sign, the effect of the SAW yarn tension sensor substrate size on the sensitivity of the SAW yarn tension sensor was investigated. Based on the regression model, a linear programming model was established to gain the optimal sensitivity of the SAW yarn tension sensor. The linear programming result shows that the maximum sensitivity will be achieved when the SAW yarn tension sensor substrate length is equal to 15 mm and its width is equal to 3mm within a fixed interval of the substrate size. An experiment of SAW yarn tension sensor about 15 mm long and 3mm wide was presented. Experimental results show that the maximum sensitivity 1982.39 Hz/g was accomplished, which confirms that the optimal sensitivity design scheme is useful and effective. Copyright © 2014. Published by Elsevier B.V.

  5. Designing a tensioning mechanism for a belt-driven integrated starter-generator system

    Energy Technology Data Exchange (ETDEWEB)

    Olatunde, A.O.; Zu, J.W. [Toronto Univ., ON (Canada)

    2009-07-01

    A belt-driven integrated starter generator (B-ISG) system was presented. Equations of motion (EOM) were used to model the system's passive twin-arm tensioner. EOMs were derived by determining moment equilibrium equations for the system's rigid bodies, as well as equations for the relationship between belt span tensions and rigid body displacements. A parametric study was conducted to evaluate the effect of the twin tensioner's parameters on the static tension of each belt span. Genetic algorithms and sequential quadratic programming (SQP) searches were conducted to determine values for the design variables needed to reduce static tension in taut and slack spans. A conventional alternator pulley design was used to model system geometry, inertia, stiffness and damping. The study showed that the twin tensioner reduced the magnitudes of the static tension for the belt spans of the ISG system. The slackest and tautest belt spans decreased and increased together during operational phases. It was concluded that additional pre-tension is required in order to compensate for slack spans in the ISG-driving phase of operation. 3 figs.

  6. Teacher Inquiry and English Learners: The Tensions of Inquiry, Direct Instruction, and Learning

    Science.gov (United States)

    Capitelli, Sarah

    2015-01-01

    This article explores the tensions surrounding teaching linguistically diverse students that are illuminated during a teacher inquiry group that has an explicit focus on working with English learners (ELs). The discussion is focused on the tensions teachers encounter when trying to make sense of the complexity of working with large numbers of ELs…

  7. The Effects of Orchestration on Musicians' and Nonmusicians' Perception of Musical Tension

    Science.gov (United States)

    Silvey, Brian A.

    2011-01-01

    The purpose of this study was to examine the effects of orchestration on musicians' and nonmusicians' (N = 40) perception of musical tension. Participants were asked to register their perceptions of tension using the Continuous Response Digital Interface dial while listening to three orchestrations (full orchestra, brass quintet, and solo piano)…

  8. Corrosion characteristics of unprotected post-tensioning strands under stress : [summary].

    Science.gov (United States)

    2014-05-01

    Post tensioned concrete is used in many Florida : transportation structures, many of which are : exposed to fresh or salt water. The steel strands : that supply the tension are encased in a plastic : duct which is later filled with grout, so the stra...

  9. Prognosis in Acute Cerebrovascular Accidents in Relation to Respiratory Pattern and Blood—gas Tensions

    Science.gov (United States)

    Rout, M. W.; Lane, D. J.; Wollner, L.

    1971-01-01

    Respiratory pattern and arterial blood gas tensions were assessed in patients with acute cerebrovascular accidents. Hyperventilation, low Pco2, and high arterial pH were associated with a poor prognosis, whereas patients with normal respiratory pattern and blood gas tensions survived. Periodic and Cheyne-Stokes breathing carried an intermediate prognosis. PMID:5091916

  10. The remains of anterior cruciate ligament graft tension after cyclic knee motion

    NARCIS (Netherlands)

    Arnold, MR; Lie, DTT; Verdonschot, N; de Graaf, R; Amis, AA; van Kampen, A

    Background: There is sometimes a return of excess knee laxity after anterior cruciate ligament reconstruction. One of the contributing factors might be a loss in graft tension. It is unknown whether the tension imposed on an anterior cruciate ligament graft degrades with time and, if so, the effect

  11. Comparison of comorbidities of migraine and tension headache in a pediatric headache clinic.

    Science.gov (United States)

    Eidlitz-Markus, Tal; Zolden, Shirit; Haimi-Cohen, Yishai; Zeharia, Avraham

    2017-10-01

    Objective To compare comorbidities between migraine and tension headache in patients treated in a tertiary pediatric headache clinic. Methods Files of patients with migraine or tension headache attending a pediatric headache clinic were retrospectively reviewed for the presence of organic comorbidities. Additionally, patients were screened with the self-report Strengths and Difficulties Questionnaire to identify nonorganic comorbidities. If necessary, patients were referred to a pediatric psychiatrist, psychologist or social worker for further evaluation. Results The study cohort comprised 401 patients: 200 with migraine and 201 with tension headache. The main organic comorbidities were atopic disease, asthma, and first-reported iron-deficiency anemia; all occurred with statistical significance more often with migraine than with tension headache (Familial Mediterranean fever was six times more frequent in the migraine group than in the tension headache group, but the difference was not statistically significant. Nonorganic comorbidities (psychiatric, social stressors) were associated significantly more often with tension headache than with migraine (48.3% versus 33%; p = 0.03). Conclusions Children and adolescents with migraine or tension headache treated in a dedicated clinic have high rates of organic and nonorganic comorbidities. In this setting, patients with migraine have significantly more organic comorbidities, and patients with tension headache, significantly more nonorganic comorbidities.

  12. The remains of anterior cruciate ligament graft tension after cyclic knee motion.

    NARCIS (Netherlands)

    Arnold, M.P.; Lie, D.T.; Verdonschot, N.J.J.; Graaf, R. de; Amis, A.A.; Kampen, A. van

    2005-01-01

    BACKGROUND: There is sometimes a return of excess knee laxity after anterior cruciate ligament reconstruction. One of the contributing factors might be a loss in graft tension. It is unknown whether the tension imposed on an anterior cruciate ligament graft degrades with time and, if so, the effect

  13. Accuracy of transcutaneous carbon dioxide tension measurements during cardiopulmonary exercise testing.

    NARCIS (Netherlands)

    Stege, G.; Elshout, F.J.J. van den; Heijdra, Y.F.; Ven, M.J.T. van de; Dekhuijzen, P.N.R.; Vos, P.J.E.

    2009-01-01

    BACKGROUND: Measurements of transcutaneous carbon dioxide tension (PtcCO(2)) with current devices are proven to provide clinically acceptable agreement with measurements of partial arterial carbon dioxide tension (PaCO(2)) in several settings but not during cardiopulmonary exercise testing (CPET).

  14. Improved Inspection Techniques for Steel Prestressing/Post Tensioning Strand : [Summary

    Science.gov (United States)

    2012-01-01

    Post-tensioned concrete has been widely used for : over 50 years. The first Sunshine Skyway Bridge, : built in 1954, was one of the earliest structures in : the U.S. to incorporate post-tensioned elements; : its replacement also uses the technology. ...

  15. Stride-related rein tension patterns in walk and trot in the ridden horse

    NARCIS (Netherlands)

    Egenvall, Agneta; Roepstorff, Lars; Eisersiö, Marie; Rhodin, Marie; van Weeren, René|info:eu-repo/dai/nl/074628550

    2015-01-01

    BACKGROUND: The use of tack (equipment such as saddles and reins) and especially of bits because of rein tension resulting in pressure in the mouth is questioned because of welfare concerns. We hypothesised that rein tension patterns in walk and trot reflect general gait kinematics, but are also

  16. Balancing Cohesion and Tension in Multimodal Rhetoric. An Interdisciplinary Approach to the Study of Semiotic Complexity

    Science.gov (United States)

    Engebretsen, Martin

    2012-01-01

    What patterns of multimodal rhetoric characterizes the most successful texts meant for learning--inside or outside school? This article argues that the balance between cohesion and tension in the interplay between modes is an issue at the core of this challenging question. Texts meant for learning need both cohesion and tension in order to be both…

  17. The interfacial surface tension of a quark-gluon plasma fireball in a ...

    Indian Academy of Sciences (India)

    We calculate the interfacial surface tension of a QGP-fireball in a hadronic medium in the Ramanathan et al statistical model. The constancy of the ratio of the surface tension with the cube of the critical transition temperature is in overall accordance with lattice QCD findings. It is in complete agreement with a recent MIT bag ...

  18. Tyrolean tensiometer: A new instrument for easy intraoperative tension measurement before nerve coaptation.

    Science.gov (United States)

    Schubert, Heinrich M; Moser, Thomas M; Buchegger, Johannes W; Brodbeck, Achim F; Schoeller, Thomas; Zimmermann, Robert F; Hohlrieder, Matthias

    2006-09-01

    In reconstructive surgery microsurgical repair of dissected nerves can be done end-to-end or by using a nerve graft. Guidelines to support an objective decision, whether tension associated with direct suture is acceptable or grafting is needed, do not exist. All experimental data found concerned the clinical outcome when a certain length defect was treated in various animal models. The aim of this study was to show the feasibility of a new instrument for measuring the tension needed to coapt nerve stumps before beginning nerve suture. A tension spring balance was modified in a way that the thread of the first suture is used to measure the force applied to the two nerve stumps by the suture before knotting. Immediately after measuring, the suture can be completed by knotting. Twenty-four rat sciatic nerves were dissected, segments of various length were resected, and tension needed for approximation was measured. These ex vivo data were combined with clinical outcome data of previous animal trials. Data obtained showed that tension measured increased almost proportionally to the size of the gap created. The average additional time needed to measure the tension using the Tyrolean Tensiometer was 11 (+/-4) seconds. None of the methods described before allow intraoperative tension measurement at a time when changes in strategy are still possible. The Tyrolean Tensiometer allows fast and reliable measurement of the tension acting on the first suture and might hereby be useful in predicting final operative outcome.

  19. Teacher Tensions when Adopting a New Approach to Teaching about Photosynthesis

    Science.gov (United States)

    Kijkuakul, Sirinapa; Yutakom, Naruemon; Roadrangka, Vantipa

    2008-01-01

    This study examined a Thai biology teacher's creative tensions when she was challenged to adopt a new teaching approach to photosynthesis with her class. The teacher was purposively selected on her need of professional growth. Data from observations and interviews documented the tensions. The data indicated that the biology teacher experienced…

  20. Calculation of Surface Tensions of Polar Mixtures with a Simplified Gradient Theory Model

    DEFF Research Database (Denmark)

    Zuo, You-Xiang; Stenby, Erling Halfdan

    1996-01-01

    Key Words: Thermodynamics, Simplified Gradient Theory, Surface Tension, Equation of state, Influence Parameter.In this work, assuming that the number densities of each component in a mixture across the interface between the coexisting vapor and liquid phases are linearly distributed, we developed...... a simplified gradient theory (SGT) model for computing surface tensions. With this model, it is not required to solve the time-consuming density profile equations of the gradient theory model. The SRK EOS was applied to calculate the properties of the homogeneous fluid. First, the SGT model was used to predict...... surface tensions of 34 binary mixtures with an overall average absolute deviation of 3.46%. The results show good agreement between the predicted and experimental surface tensions. Next, the SGT model was applied to correlate surface tensions of binary mixtures containing alcohols, water or/and glycerol...