WorldWideScience

Sample records for temporary anchorage devices

  1. Temporary anchorage devices – Mini-implants

    Science.gov (United States)

    Singh, Kamlesh; Kumar, Deepak; Jaiswal, Raj Kumar; Bansal, Amol

    2010-01-01

    Orthodontists are accustomed to using teeth and auxiliary appliances, both intraoral and extraoral, to control anchorage. These methods are limited in that it is often difficult to achieve results commensurate with our idealistic goals. Recently, a number of case reports have appeared in the orthodontic literature documenting the possibility of overcoming anchorage limitations via the use of temporary anchorage devices—biocompatible devices fixed to bone for the purpose of moving teeth, with the devices being subsequently removed after treatment. Although skeletal anchorage is here to stay in orthodontics, there are still many unanswered questions. This article describes the development of skeletal anchorage and provides an overview of the use of implants for orthodontic anchorage. PMID:22442547

  2. Temporary anchorage device usage: a survey among Swiss orthodontists.

    OpenAIRE

    Markic, Goran; Katsaros, Christos; Pandis, Nikolaos; Eliades, Theodore

    2014-01-01

    BACKGROUND The aim of the survey was to obtain information on the treatment plan preferences, mechanics and characteristics of temporary anchorage device (TAD) application using a single case presented to orthodontists in Switzerland. METHODS A structured questionnaire to be completed by all study participants with case-specific (treatment plan including mechanics and TAD usage) and general questions (general fixed appliance and TAD usage as well as professional, educational and d...

  3. Image guided placement of temporary anchorage devices for tooth movement

    Energy Technology Data Exchange (ETDEWEB)

    Bahl-Palomo, L.; Bissada, N. [Case Western Reserve Univ. School of Dental Medicine, Dept. of Periodontics, Cleveland, OH (United States); Palomo, J.M.; Hans, M.G. [Case Western Reserve Univ. School of Dental Medicine, Dept. of Orthodontics, Cleveland, OH (United States)

    2007-06-15

    The aim of this project is to develop an image guided protocol for placement of a temporary anchorage device without surgically reflecting a mucoperiosteal flap. Eighteen orthodontic cases were selected for skeletal anchorage from the department of orthodontics at Case University. CBCT images of the subjects were taken using the Hitachi CB MercuRay system set at 15 mA, 120 kVp. CBCT images evaluated the ideal location for TAD placement in three dimensions. Horizontal and vertical linear measurements were taken from fixed dental landmarks to clearly define the location for placement. Transverse slices were used to evaluate the thickness of the buccal plate. Using the transverse view, the angle of insertion was determined such that the maximum buccal plate surface area would contact the screw. TADs were placed in the optimum location, with the most appropriate angle of insertion using a closed approach and with minimal local anesthesia and without flap elevation. Results: All TADs were placed without anatomic encroachment and enabled fixed orthodontic anchorage. (orig.)

  4. Acceptance of orthodontic miniscrews as temporary anchorage devices

    Directory of Open Access Journals (Sweden)

    Zawawi KH

    2014-06-01

    Full Text Available Khalid H Zawawi Department of Orthodontics, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia Objective: To study the patient’s acceptance, expectation, and experience of pain with ­orthodontic temporary miniscrews. Methods: Questionnaires were distributed to 165 potential temporary orthodontic miniscrew recipients or their parents. Using the numeric rating scale, patients who received miniscrews as part of their orthodontic treatment were also asked to rate the pain or discomfort experience after miniscrew placement.Results: A total of 165 subjects completed the first set of questions. There was a significant relationship between level of education and prior knowledge about orthodontic miniscrews (P=0.029. Even though only 12.7% had heard about miniscrews, 82.4% agreed to have miniscrews placed to facilitate orthodontic tooth movement. Eighty-three subjects who needed miniscrews as part of their orthodontic treatment completed two more sets of questions after 6 and 24 hours of miniscrew insertion. After 6 hours of miniscrew insertion, there was a significant difference in pain perception between men (mean =2.6±2.2 and women (mean =2.1±1.5; P=0.03. After 24 hours, there was no difference between men (0.2±0.4 and women (0.2±0.5; P>0.05. Postplacement, 32.5% did not require any pain medication, while 59.1% required a single dose and only 8.4% required two doses. A total of 76 patients (91.6% said that they would recommend this procedure.Conclusion: Patients do accept miniscrew as a treatment option in orthodontics. Postoperative pain is significantly low. The acceptance of miniscrews was not related to patient’s previous knowledge of the device, and patients preferred miniscrews to extractions. Keywords: orthodontic treatment, miniscrew, temporary anchorage device, patient acceptance

  5. Virtual planning for vertical control using temporary anchorage devices

    Directory of Open Access Journals (Sweden)

    Mauricio Accorsi

    2015-01-01

    Full Text Available The new and innovative technologies are unprecedentedly improving the level of proficiency in orthodontics in the recent history of this area of expertise. The proliferation of advances, such as self-ligating systems, temporary anchorage devices, shape-memory wires, robotically wire bending, intraoral scanners, cone-beam computed tomography, bring the virtual planning, and confection of dental devices through CAD/CAM systems to the real world. In order to get efficiency and efficacy in orthodontics with these new technologies, we must understand the importance of systemically managed clinical information, medical, and dentistry history of the patients, including the images resources, which ensures the use of a communication that is assisted by the technology, with an interdisciplinary team so that the database is able to help and support the process of therapeutic decision-making. This paper presents the clinical case of a borderline patient for orthognathic surgery who had his final treatment planning supported by these new tools for three-dimensional diagnosis and virtual planning.

  6. Open bite treated with extractions and temporary anchorage devices

    Directory of Open Access Journals (Sweden)

    Carol Weinstein

    2017-01-01

    Full Text Available A 13-year-old female with a chief complaint of continuing treatment presented with Class I skeletal pattern and slight facial asymmetry. Intraorally, she had Class II molar relationship on the right side, class l on the left side and 3mm. of midline discrepancy. Her upper and lower incisors were proclined and slightly crowded. She had 1 mm. overbite and 5mm. overjet in initial mounted casts. Splint therapy was suggested to stabilize mandibular position. After splint wear, a new mounting was made, which resulted in an open bite from left second molars to right second molars. A visual treatment objective was prepared with four first bicuspid extractions. After 9 months, upper second molars were extracted and temporary anchorage devices (TADs were placed in the upper arch for intrusion. Detailing strategies such as bracket repositioning, occlusal adjustment, and elastics were used. The role of segmented models, second molar extraction treatment, and superimposition analysis in patients with discrepancies in mandibular position is discussed. It is concluded that a thorough case workup is needed to provide patients with a successful treatment for open bite cases. This case was treated orthodontically in 2 years with four bicuspid and upper second molar extractions as well as vertical control with TADs.

  7. Temporary anchorage device usage: a survey among Swiss orthodontists.

    Science.gov (United States)

    Markic, Goran; Katsaros, Christos; Pandis, Nikolaos; Eliades, Theodore

    2014-04-01

    The aim of the survey was to obtain information on the treatment plan preferences, mechanics and characteristics of temporary anchorage device (TAD) application using a single case presented to orthodontists in Switzerland. A structured questionnaire to be completed by all study participants with case-specific (treatment plan including mechanics and TAD usage) and general questions (general fixed appliance and TAD usage as well as professional, educational and demographic questions) together with an orthodontic borderline case was utilised. The case was a female adult with dental Class II/2, deep bite and maxillary anterior crowing, who had been treated in childhood with extraction of four premolars and fixed appliance followed by wisdom tooth extraction. The response rate was 24.4% (108 out of 443). The majority (96.3%, 104) proposed comprehensive treatment, while 3.7% (4) planned only alignment of maxillary teeth. 8.3% (9) included a surgical approach in their treatment plan. An additional 0.9% (1) combined the surgical approach with Class II mechanics. 75.1% (81) decided on distalization on the maxilla using TADs, 7.4% (8) planned various types of Class II appliances and 3.7% (4) combined distalization using TADs or headgear with Class II appliances and surgery. Palatal implants were the most popular choice (70.6%, 60), followed by mini-screws (22.4%, 19) and mini-plates on the infrazygomatic crests (7.0%, 6). The preferred site of TAD insertion showed more variation in sagittal than in transversal dimension, and the median size of mini-screws used was 10.0-mm long (interquartile range (IQR) 2.3 mm) and 2.0-mm wide (IQR 0.3 mm). Distalization against palatal implants and then distalization against mini-screws were the most popular treatment plans. Preferred site for TAD insertion varied depending on type and size but varied more widely in the sagittal than in the transversal dimension.

  8. Temporary anchorage device usage: a survey among Swiss orthodontists

    Science.gov (United States)

    2014-01-01

    Background The aim of the survey was to obtain information on the treatment plan preferences, mechanics and characteristics of temporary anchorage device (TAD) application using a single case presented to orthodontists in Switzerland. Methods A structured questionnaire to be completed by all study participants with case-specific (treatment plan including mechanics and TAD usage) and general questions (general fixed appliance and TAD usage as well as professional, educational and demographic questions) together with an orthodontic borderline case was utilised. The case was a female adult with dental Class II/2, deep bite and maxillary anterior crowing, who had been treated in childhood with extraction of four premolars and fixed appliance followed by wisdom tooth extraction. Results The response rate was 24.4% (108 out of 443). The majority (96.3%, 104) proposed comprehensive treatment, while 3.7% (4) planned only alignment of maxillary teeth. 8.3% (9) included a surgical approach in their treatment plan. An additional 0.9% (1) combined the surgical approach with Class II mechanics. 75.1% (81) decided on distalization on the maxilla using TADs, 7.4% (8) planned various types of Class II appliances and 3.7% (4) combined distalization using TADs or headgear with Class II appliances and surgery. Palatal implants were the most popular choice (70.6%, 60), followed by mini-screws (22.4%, 19) and mini-plates on the infrazygomatic crests (7.0%, 6). The preferred site of TAD insertion showed more variation in sagittal than in transversal dimension, and the median size of mini-screws used was 10.0-mm long (interquartile range (IQR) 2.3 mm) and 2.0-mm wide (IQR 0.3 mm). Conclusions Distalization against palatal implants and then distalization against mini-screws were the most popular treatment plans. Preferred site for TAD insertion varied depending on type and size but varied more widely in the sagittal than in the transversal dimension. PMID:24935644

  9. A Study of Success Rate of Miniscrew Implants as Temporary Anchorage Devices in Singapore

    Science.gov (United States)

    Yi Lin, Song; Mimi, Yow; Ming Tak, Chew; Kelvin Weng Chiong, Foong; Hung Chew, Wong

    2015-01-01

    Objective. To find out the success rate of miniscrew implants in the National Dental Centre of Singapore (NDCS) and the impact of patient-related, location-related, and miniscrew implant-related factors. Materials and Methods. Two hundred and eighty-five orthodontic miniscrew implants were examined from NDCS patient records. Eleven variables were analysed to see if there is any association with success. Outcome was measured twice, immediately after surgery prior to orthodontic loading (T1) and 12 months after surgery (T2). The outcome at T2 was assessed 12 months after the miniscrew's insertion date or after its use as a temporary anchorage device has ceased. Results. Overall success rate was 94.7% at T1 and 83.3% at T2. Multivariate analysis revealed only the length of miniscrew implant to be significantly associated with success at both T1 (P = 0.002) and T2 (P = 0.030). Miniscrew implants with lengths of 10–12 mm had the highest success rate (98.0%) compared to other lengths, and this is statistically significant (P = 0.035). At T2, lengths of 10–12 mm had significantly (P = 0.013) higher success rates (93.5%) compared to 6-7 mm (76.7%) and 8 mm (82.1%) miniscrew implants. Conclusion. Multivariate statistical analyses of 11 variables demonstrate that length of miniscrew implant is significant in determining success. PMID:25861272

  10. Effect of molar intrusion with temporary anchorage devices in patients with anterior open bite: a systematic review

    OpenAIRE

    Ahmad Saleem Alsafadi; Mohannad M. Alabdullah; Humam Saltaji; Anas Abdo; Mohamed Youssef

    2016-01-01

    Abstract Objective The objective of the study is to assess the effect of molar intrusion with temporary anchorage devices on the vertical facial morphology and mandibular rotation during open bite treatment in the permanent dentition. Methods We performed a systematic review of the published data in seven electronic databases up to September 2015. We considered studies for inclusion if they were examining the effects of posterior teeth intrusion on the vertical facial morphology with open bit...

  11. Effect of molar intrusion with temporary anchorage devices in patients with anterior open bite: a systematic review.

    Science.gov (United States)

    Alsafadi, Ahmad Saleem; Alabdullah, Mohannad M; Saltaji, Humam; Abdo, Anas; Youssef, Mohamed

    2016-01-01

    The objective of the study is to assess the effect of molar intrusion with temporary anchorage devices on the vertical facial morphology and mandibular rotation during open bite treatment in the permanent dentition. We performed a systematic review of the published data in seven electronic databases up to September 2015. We considered studies for inclusion if they were examining the effects of posterior teeth intrusion on the vertical facial morphology with open bite malocclusion in the permanent dentition. Study selection, risk of bias assessment, and data-extraction were performed in duplicate. Meta-analysis was not possible due to dissimilarity and heterogeneity among the included studies. Out of the 42 articles that met the initial eligibility criteria, 12 studies were finally selected. Low level of scientific evidence was identified after risk of bias assessment of the included studies with no relevant randomized controlled trial performed. Out of the 12 selected studies, five studies used miniplates and seven studies used miniscrews. Mandibular counterclockwise rotation was found to be between 2.3° and 3.9° in six studies (as sassed by mandibular plane angle, between MeGo or GoGn and SN or FH plane) while it was less than 2° in the remaining studies. Current weak evidence suggests that molar intrusion with temporary anchorage devices may cause mandibular counterclockwise autorotation. Future well-conducted and clearly reported multicenter randomized controlled trials that include a non-treatment control group are needed to make robust recommendations regarding the amount of mandibular rotation during open bite treatments.

  12. Effect of molar intrusion with temporary anchorage devices in patients with anterior open bite: a systematic review

    Directory of Open Access Journals (Sweden)

    Ahmad Saleem Alsafadi

    2016-03-01

    Full Text Available Abstract Objective The objective of the study is to assess the effect of molar intrusion with temporary anchorage devices on the vertical facial morphology and mandibular rotation during open bite treatment in the permanent dentition. Methods We performed a systematic review of the published data in seven electronic databases up to September 2015. We considered studies for inclusion if they were examining the effects of posterior teeth intrusion on the vertical facial morphology with open bite malocclusion in the permanent dentition. Study selection, risk of bias assessment, and data-extraction were performed in duplicate. Meta-analysis was not possible due to dissimilarity and heterogeneity among the included studies. Results Out of the 42 articles that met the initial eligibility criteria, 12 studies were finally selected. Low level of scientific evidence was identified after risk of bias assessment of the included studies with no relevant randomized controlled trial performed. Out of the 12 selected studies, five studies used miniplates and seven studies used miniscrews. Mandibular counterclockwise rotation was found to be between 2.3° and 3.9° in six studies (as sassed by mandibular plane angle, between MeGo or GoGn and SN or FH plane while it was less than 2° in the remaining studies. Conclusions Current weak evidence suggests that molar intrusion with temporary anchorage devices may cause mandibular counterclockwise autorotation. Future well-conducted and clearly reported multicenter randomized controlled trials that include a non-treatment control group are needed to make robust recommendations regarding the amount of mandibular rotation during open bite treatments.

  13. Outcomes and stability in patients with anterior open bite and long anterior face height treated with temporary anchorage devices and a maxillary intrusion splint

    Science.gov (United States)

    Scheffler, Nicole R.; Proffit, William R.; Phillips, Ceib

    2015-01-01

    Introduction Temporary skeletal anchorage devices now offer the possibility of closing anterior open bites and decreasing anterior face height by intruding maxillary posterior teeth, but data for treatment outcomes are lacking. This article presents outcomes and posttreatment changes for consecutive patients treated with a standardized technique. Methods The sample included 33 consecutive patients who had intrusion of maxillary posterior teeth with a maxillary occlusal splint and nickel-titanium coil springs to temporary anchorage devices in the zygomatic buttress area, buccal and apical to the maxillary molars. Of this group, 30 had adequate cephalograms available for the period of treatment, 27 had cephalograms including 1-year posttreatment, and 25 had cephalograms from 2 years or longer. Results During splint therapy, the mean molar intrusion was 2.3 mm. The mean decrease in anterior face height was 1.6 mm, less than expected because of a 0.6-mm mean eruption of the mandibular molars. During the postintrusion orthodontics, the mean change in maxillary molar position was a 0.2-mm extrusion, and there was a mean 0.5-mm increase in face height. Positive overbite was maintained in all patients, with a slight elongation (Intrusion of the maxillary posterior teeth can give satisfactory correction of moderately severe anterior open bites, but 0.5 to 1.5 mm of reeruption of these teeth is likely to occur. Controlling the vertical position of the mandibular molars so that they do not erupt as the maxillary teeth are intruded is important in obtaining a decrease in face height. PMID:25439210

  14. Comparison of in-vivo failure of single-thread and dual-thread temporary anchorage devices over 18 months: A split-mouth randomized controlled trial.

    Science.gov (United States)

    Durrani, Owais Khalid; Shaheed, Sohrab; Khan, Arsalan; Bashir, Ulfat

    2017-10-01

    The purpose of this study was to compare the in-vivo failure rates of single-thread and dual-thread temporary anchorage device (TAD) designs over 18 months. Thirty patients with skeletal Class II Division 1 malocclusion requiring anchorage from TADs for retraction of maxillary incisors into the extracted premolar space were recruited in this parallel group, split-mouth, randomized controlled trial. A block randomization sequence was generated with Random Allocation Software (version 2.0; Isfahan, Iran) with the allocations concealed in sequentially numbered, opaque, sealed envelopes. A total of 60 TADs (diameter, 2 mm; length, 10 mm) were placed in the maxillary arches of these patients with random allocation of the 2 types to the left and the right sides in a 1:1 ratio. All TADs were placed between the roots of the second premolar and the first molar and were immediately loaded. Patients were followed for a minimum of 12 months and a maximum of 18 months for the failure of the TADs. Data were analyzed blindly on an intention-to-treat basis. Four TADs (13.3%) failed in the single-thread group, and 6 TADs (20%) failed in the dual-thread group. The McNemar test showed an insignificant difference (P = 0.72) between the 2 groups. An odds ratio of 1.6 (95% confidence interval, 0.39-6.97) showed no significant associations among the variables. Most TADs failed in the first month after insertion (50%). The failure rate of dual-thread TADs compared with single-thread TADs is statistically insignificant when placed in the maxilla for retraction of the anterior segment. Registration: The trial was not registered before commencement. The protocol was not published before the trial. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  15. Which region of the median palate is a suitable location of temporary orthodontic anchorage devices? A histomorphometric study on human cadavers aged 15-20 years.

    Science.gov (United States)

    Stockmann, Philipp; Schlegel, Karl Andreas; Srour, Safwan; Neukam, Friedrich Wilhelm; Fenner, Matthias; Felszeghy, Endre

    2009-03-01

    Endosseus implants can provide a reliable anchorage during orthodontic treatment. The midpalatal structures around the sutura palatina mediana (SPM) are of special interest due to increasing placement of orthodontic implants in this area. Knowledge about the osseous conditions at this site is necessary to predict the expected degree of implant osseointegration. The upper jaws of 10 human cadavers, aged 15-20 years, were decalcified, and cross-sectional specimens were obtained from four anterior-to-posterior palatal regions for histomorphometric analysis. The analyses focused on the amount of bone and the width of the SPM to determine the anatomical requirements for reliable insertion of palatal implants. Bone density [bone-volume (BV)/ tissue-volume (TV)] in all measured areas was 40-60%. The maximum density was measured at the level of the first premolars (54.9+/-5.9%) and the least values (44.2+/-9.6%) were measured at the level of the interconnecting line of the canines. The mean width of the SPM varies from 1.2 to 0.3 mm in different sections of the palate. In the median sagittal plane, the mean values of bone height to nasal cavity reached >5 mm as far as the level distal of the second premolars. Bone height 2 mm paramedian to the SPM decreased consistently from anterior (4.3+/-0.9 mm) to posterior (2.5+/-0.8 mm). Our results indicate that the amount and quality of bone along the anterior palatal midline in 15-to-20-year olds is sufficient for orthodontic implantation. Even implantation posterior to the recommended first premolar level, at which orthodontic implants are most often placed, may be suitable. There are some limitations, however, due to small number of samples and variations of anatomical structures.

  16. The use of miniscrew implants for temporary skeletal anchorage in orthodontics: a comprehensive review.

    Science.gov (United States)

    Papadopoulos, Moschos A; Tarawneh, Fadi

    2007-05-01

    Though not a novel therapeutic concept, the use of miniscrew implants to obtain absolute anchorage has recently become very popular in clinical orthodontic approaches. The mode of anchorage facilitated by these implant systems has a unique characteristic owing to their temporary use, which results in a transient, albeit absolute anchorage. The foregoing properties together with the recently achieved simple application of these screws have increased their popularity, establishing them as a necessary treatment option in complex cases that would have otherwise been impossible to treat. The aim of this comprehensive review is to present and discuss the development, clinical use, benefits, and drawbacks of the miniscrew implants used to obtain a temporary but absolute/skeletal anchorage for orthodontic applications. Topics to be discussed include classification, types and properties (e.g., biocompatibility, osseointegration, types of anchorage, screw head, and thread design), clinical applications, site and placement method selection, clinical procedures for implant insertion, and loading and removal processes. Lastly, the potential complications and the advantages and disadvantages accompanying their use are presented.

  17. Modified Miniplates for Temporary Skeletal Anchorage in Orthodontics: Placement and Removal Surgeries

    Science.gov (United States)

    Cornelis, Marie A.; Scheffler, Nicole R.; Mahy, Pierre; Siciliano, Sergio; De Clerck, Hugo J.; Tulloch, J.F. Camilla

    2009-01-01

    Purpose Skeletal anchorage systems are increasingly used in orthodontics. This article describes the techniques of placement and removal of modified surgical miniplates used for temporary orthodontic anchorage and reports surgeons’ perceptions of their use. Patients and Methods We enrolled 97 consecutive orthodontic patients having miniplates placed as an adjunct to treatment. A total of 200 miniplates were placed by 9 oral surgeons. Patients and surgeons completed questionnaires after placement and removal surgeries. Results Fifteen miniplates needed to be removed prematurely. Antibiotics and anti-inflammatories were generally prescribed after placement but not after removal surgery. Most surgeries were performed with the patient under local anesthesia. Placement surgery lasted on average between 15 and 30 minutes per plate and was considered by the surgeons to be very easy to moderately easy. The surgery to remove the miniplates was considered easier and took less time. The patients’ chief complaint was swelling, lasting on average 5.3 ± 2.8 days after placement and 4.5 ± 2.6 days after removal. Conclusions Although miniplate placement/removal surgery requires the elevation of a flap, this was considered an easy and relatively short surgical procedure that can typically be performed with the patient under local anesthesia without complications, and it may be considered a safe and effective adjunct for orthodontic treatment. PMID:18571028

  18. New concept of physiologic anchorage control

    Directory of Open Access Journals (Sweden)

    Tian-Min Xu

    2015-01-01

    Full Text Available Molar anchorage loss in extraction case is believed due to the reaction of mechanical force applied to retract anterior teeth. While it may be close to truth in adult patients, it is certainly not true in adolescents. Studies on molar growth show upper molar move forward as mandible growing forward, probably through intercuspation force. Hence, for adolescents, molar anchorage loss shall consist of two parts. One is from retraction force - mechanical anchorage loss; another from biologic force - physiologic anchorage loss. Since physiologic anchorage loss is caused by the continuous biologic force, the strategy of physiologic anchorage control (PAC is different from the strategy of mechanical anchorage control. A new PAC method is introduced in this article that can reduce the headgear and temporary anchorage device used as sagittal anchorage dramatically in orthodontic clinic.

  19. 29 CFR 1926.154 - Temporary heating devices.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Temporary heating devices. 1926.154 Section 1926.154 Labor... Temporary heating devices. (a) Ventilation. (1) Fresh air shall be supplied in sufficient quantities to... heating devices shall be installed to provide clearance to combustible material not less than the amount...

  20. Research on the video detection device in the invisible part of stay cable anchorage system

    Science.gov (United States)

    Cai, Lin; Deng, Nianchun; Xiao, Zexin

    2012-11-01

    The cables in anchorage zone of cable-stayed bridge are hidden within the embedded pipe, which leads to the difficulty for detecting the damage of the cables with visual inspection. We have built a detection device based on high-resolution video capture, realized the distance observing of invisible segment of stay cable and damage detection of outer surface of cable in the small volume. The system mainly consists of optical stents and precision mechanical support device, optical imaging system, lighting source, drived motor control and IP camera video capture system. The principal innovations of the device are ⑴A set of telescope objectives with three different focal lengths are designed and used in different distances of the monitors by means of converter. ⑵Lens system is far separated with lighting system, so that the imaging optical path could effectively avoid the harsh environment which would be in the invisible part of cables. The practice shows that the device not only can collect the clear surveillance video images of outer surface of cable effectively, but also has a broad application prospect in security warning of prestressed structures.

  1. Mini-Implants in the Anchorage Armamentarium: New Paradigms in the Orthodontics

    Directory of Open Access Journals (Sweden)

    Masaru Yamaguchi

    2012-01-01

    Full Text Available Paradigms have started to shift in the orthodontic world since the introduction of mini-implants in the anchorage armamentarium. Various forms of skeletal anchorage, including miniscrews and miniplates, have been reported in the literature. Recently, great emphasis has been placed on the miniscrew type of temporary anchorage device (TAD. These devices are small, are implanted with a relatively simple surgical procedure, and increase the potential for better orthodontic results. Therefore, miniscrews not only free orthodontists from anchorage-demanding cases, but they also enable clinicians to have good control over tooth movement in 3 dimensions. The miniplate type also produces significant improvements in treatment outcomes and has widened the spectrum of orthodontics. The purpose of this paper is to update clinicians on the current concepts and versatile uses and clinical applications of skeletal anchorage in orthodontics.

  2. Anatomic site evaluation of the palatal bone for temporary orthodontic anchorage devices.

    Science.gov (United States)

    Wehrbein, Heinrich

    2008-07-01

    The aim of the present study was to assess the micromorphologic characteristics of the palatal bone from an implantologic standpoint. The material consisted of tissue blocks of autopsy material from 22 subjects (18 males, three females) between 18 and 63 years of age. The specimens comprised the anterior median palatal region from 5 to 10 mm behind the incisive foramen. They were prepared in the transversal plane according to ground thin-section technology. The midpalatal area as well as an area of 3 mm bilateral to the midline were assessed, and a classification of quantitative palatal bone availability was developed. The findings could be divided into three classes: (1) class I palatal bone consists almost of compact bone; (2) class II cortical bone layer on oral and nasal sides of palate, broad compact bone in the suture area (>or=3 mm), loose trabecular bone lateral to the suture area; and (3) class III cortical bone on oral and nasal side, thin compact bone in the suture area (palate, as the bone quantity available is high.

  3. Damage to the root after tooth movement towards a temporary anchorage device: An animal pilot study

    Directory of Open Access Journals (Sweden)

    Cheng-Tsung Huang

    2012-06-01

    Conclusions: A root moving towards a screw during OTM leads to crater-like damage. When time was allowed for healing, a trace of labeled cementum was found to have repaired the root surface, although a large portion of the concavity was filled in with alveolar bone, and the periodontal ligament space remained constant. A root moving against a screw produced excessive tipping. To avoid deviation from the predicted biomechanics and damage to the root, extra caution should be used to ensure the best benefits for patients when TADs are used interdentally for distalization of the dentition during orthodontic treatment.

  4. Vacuum with mesh is a feasible temporary closure device after fascial dehiscence

    DEFF Research Database (Denmark)

    Bjørsum-Meyer, Thomas; Skarbye, Mona; Jensen, Kenneth Højsgaard

    2013-01-01

    INTRODUCTION: The open abdomen is a challenging condition and a temporary abdominal closure device is required in order to protect the intra-abdominal viscera. We aimed to evaluate the feasibility of a recent device: vacuum-assisted wound closure and mesh-mediated fascial traction (VAWCM) after...... abdomen after fascial dehiscence. We stress the need for more studies on temporary abdominal closure devices in selected groups of patients. FUNDING: not relevant. TRIAL REGISTRATION: not relevant....

  5. Rate of intrusion of maxillary incisors in Class II Div 1 malocclusion using skeletal anchorage device and Connecticut intrusion arch.

    Science.gov (United States)

    Kumar, Prasanna; Datana, Sanjeev; Londhe, S M; Kadu, Abhijeet

    2017-01-01

    Nonsurgical correction of deep bite involves either extrusion of posterior teeth, intrusion of incisors, or combination of both. The introduction of skeletal anchorage device with microimplant provides near absolute anchorage without producing any untoward effects on anchor unit. Connecticut Intrusion Arch (CIA) provided an efficient system of intruding anterior segment without producing much adverse affects on anchor teeth. The study comprised of 30 patients of Class II Div 1 malocclusion with overbite of >6 mm and required therapeutic extractions of all first premolars, randomly distributed into two groups. Group 1 was treated using orthodontic microimplants, while Group 2 treated with CIA. Lateral cephalograms were taken pre-intrusion (T1) and post-intrusion at the end of six months (T2). The rate of intrusion was 0.51 and 0.34 mm/month for Group 1 and Group 2 respectively. The average amount of change in centroid point to PP distance and U1-SN angle was significantly higher in Group 1 compared to Group 2 (P  0.05). The amount of intrusion is significantly higher in SAD group. Although vertical molar positional change was higher in CIA group than the SAD group, it was not changed significantly in both treatment modalities. SAD group overall had better results and was easier in handling during intrusion.

  6. New palatal distraction device by both bone-borne and tooth-borne force application in a paramedian bone anchorage site: surgical and occlusal considerations on clinical cases.

    Science.gov (United States)

    Cortese, Antonio; Savastano, Germano; Amato, Massimo; Cantone, Antonio; Boschetti, Ciro; Claudio, Pier Paolo

    2014-03-01

    Maxillary constriction is a very common pathology with implications on dental occlusion, temporomandibular joint dysfunction, nasal breathing, and impairment on the smile and face esthetic.New techniques for expansion of the maxillary bones are particularly useful in relation to the new esthetic ideals of smile and face beauty.To achieve a bodily expansion of the maxillary bones, we developed a new rigid palatal distractor device with both tooth-borne and paramedian bone-borne anchorages to achieve a safe and simple anchorage site suitable also for orthodontic appliances.The reported cases show good results, with bodily maxillary expansion and cross-bite correction without any problems or complications. Substantial advantages of this new device and technique, in comparison with other commonly used palatal distractors, consisting of bodily maxillary movements, avoidance of relapse risks, and safe and simple screw insertion site for bone anchorage also suitable for orthodontic movements, are discussed.

  7. Compatibility of Radiofrequency Surgical Sponge Detection Technology with Cardiac Implantable Electronic Devices and Temporary Pacemakers.

    Science.gov (United States)

    Salcedo, Jonathan D; Pretorius, Victor G; Hsu, Jonathan C; Lalani, Gautam G; Schricker, Amir A; Hebsur, Shrinivas M; McGARRY, Thomas J; Hunter, Jessica A; Lewis, Kathryn E; Krummen, David E; Feld, Gregory K; Birgersdotter-Green, Ulrika

    2016-11-01

    Radiofrequency (RF) technology has improved detection of retained surgical sponges with a reported 100% sensitivity and specificity. However, the potential for interactions of the RF signals emitted by the detection system with cardiac implantable electronic devices (CIEDs) or temporary pacemakers may limit its use in those patients with these devices. This study investigated whether RF detection technology causes interference or clinically significant changes in the programmed settings of implanted pacemakers and defibrillators or temporary epicardial pacemakers. Fifty patients who were scheduled either for CIED removal or placement of a temporary epicardial pacemaker (at the time of open heart surgery) were recruited for this study. Device settings and measurements from separate interrogations before and after scanning with the RF detection system were compared. For the temporary pacemakers, we observed for any changes in hemodynamics or signs of pacing interference. Twenty (40%) pacemakers, 20 (40%) implantable cardioverter defibrillators, and 10 (20%) temporary pacemakers were analyzed in this study. During scanning, no signal interference was detected in any permanent device, and there were no significant changes in programmed settings after scanning with the RF detection system. However, pacing inhibition was detected with temporary pacing systems when programmed to a synchronous mode (DDD). RF detection technology can be safely used to scan for retained surgical sponges in patients with permanent CIEDs and temporary pacemakers set to asynchronous mode. © 2016 Wiley Periodicals, Inc.

  8. Vacuum with mesh is a feasible temporary closure device after fascial dehiscence

    DEFF Research Database (Denmark)

    Bjørsum-Meyer, Thomas; Skarbye, Mona; Jensen, Kenneth Højsgaard

    2013-01-01

    INTRODUCTION: The open abdomen is a challenging condition and a temporary abdominal closure device is required in order to protect the intra-abdominal viscera. We aimed to evaluate the feasibility of a recent device: vacuum-assisted wound closure and mesh-mediated fascial traction (VAWCM) after f...

  9. Comparison of hardness of three temporary filling materials cured by two light-curing devices.

    Science.gov (United States)

    Bodrumlu, E; Koçak, M M; Hazar Bodrumlu, E; Ozcan, S; Koçak, S

    2014-01-01

    Polymerization ability of light-curing devices can affect the light-cured material hardness. The purpose of the present study was to evaluate and compare the hardness of three temporary filling materials that had been light-cured by either a light emitting diode (LED) or a halogen light-curing unit. The temporary filling materials, First Fill, Voco Clip and Bioplic, were placed in wells in a Teflon plate. The 24 specimens of each material were divided into two groups (N.=12/group) for photo-activation by either of the two light-curing units. The LED or halogen device was applied for 40s to the top surface of each specimen. A Knoop hardness test was performed on the top and bottom surface of each specimen, with five measurements per specimen. The highest hardness values for both the LED and halogen treated groups were observed for First Fill and the lowest values were for Voco Clip in top and bottom surfaces. The hardness obtained for the three materials with the halogen unit were significantly higher than the values obtained with the LED unit in both surfaces (Phardness values on the top and bottom surfaces than Voco Clip and Bioplic temporary materials. The hardness of light-cured temporary filling materials can be affected by the type of light-curing unit.

  10. Evaluating the effects of consolidation on intrusion and retraction using temporary anchorage devices-a FEM study.

    Science.gov (United States)

    Namburi, Monica; Nagothu, Sleevaraju; Kumar, Chetan S; Chakrapani, N; Hanumantharao, C H; Kumar, Supradeep K

    2017-12-01

    Extraction of premolars and retracting the anterior teeth using mini-implants and anterior retraction hooks became advent now a day. In such treatments, consolidation of arches is not done in regular practice. So, the present study is concentrated on effects of consolidation in two implant and three implant combinations of retraction and intrusion. A three-dimensional FEM model of maxillary teeth and periodontal ligament housed in the alveolar bone with the first premolars extracted is generated with appropriate number of elements and nodes. The models were broadly divided into two groups according to the no. of implants. Mini-implants were placed bilaterally between the second premolar and molar at varying heights (7, 10, 13 mm) in group I, and along with bilateral implants, an additional mid-implant is placed between the central incisors as group II. Brackets with 0.022 slot were placed on the teeth, 19 × 25 SS wire is placed in the brackets, an anterior retraction hook was placed at 9 mm height, and analysis was done to evaluate the stresses and displacement patterns in consolidation and non-consolidation models. The results showed that consolidation of the anterior teeth during intrusion and retraction shows various advantages such as less stresses on the bone, PDL, implant, teeth, and no labial flaring of the anterior teeth and three implant system, i.e., two bilateral implant at 10 mm and a mid-implant at 12 mm between the centrals has shown to be better than other models as bodily movement is observed. Consolidation is better than non consolidation during enmasse retraction and intrusion.

  11. Vacuum with mesh is a feasible temporary closure device after fascial dehiscence

    DEFF Research Database (Denmark)

    Bjørsum-Meyer, Thomas; Skarbye, Mona; Jensen, Kenneth Højsgaard

    2013-01-01

    INTRODUCTION: The open abdomen is a challenging condition and a temporary abdominal closure device is required in order to protect the intra-abdominal viscera. We aimed to evaluate the feasibility of a recent device: vacuum-assisted wound closure and mesh-mediated fascial traction (VAWCM) after...... October 2008 and October 2012. RESULTS: The 18 patients had a median age of 64 (29-90) years. 80% (12/15) obtained delayed primary abdominal closure. The in-hospital mortality was 17% (3/18). The median treatment period with VAWCM and vacuum-assisted wound closure were 18 (7-34) and 21 (7-53) days...

  12. Effectiveness of 3 methods of anchorage reinforcement for maximum anchorage in adolescents: A 3-arm multicenter randomized clinical trial.

    Science.gov (United States)

    Sandler, Jonathan; Murray, Alison; Thiruvenkatachari, Badri; Gutierrez, Rodrigo; Speight, Paul; O'Brien, Kevin

    2014-07-01

    The objective of this 3-arm parallel randomized clinical trial was to compare the effectiveness of temporary anchorage devices (TADs), Nance button palatal arches, and headgear for anchorage supplementation in the treatment of patients with malocclusions that required maximum anchorage. This trial was conducted between August 2008 and February 2013 in 2 orthodontic departments in the United Kingdom. The study included 78 patients (ages, 12-18 years; mean age, 14.2 years) who needed maximum anchorage. Eligibility criteria included no active caries, exemplary oral hygiene, and maximum anchorage required. The primary outcome was mesial molar movement during the period in which anchorage supplementation was required. The secondary outcomes were duration of anchorage reinforcement, number of treatment visits, number of casual and failed appointments, total treatment time, dento-occlusal change, and patients' perceptions of the method of anchorage supplementation. Treatment allocation was implemented by contacting via the Internet the randomization center at the University of Nottingham, Clinical Trials Unit. The randomization was based on a computer-generated pseudo-random code with random permuted blocks of randomly varying size. A research assistant who was blinded to the group allocation recorded all data. The patients were randomly allocated to receive anchorage supplementation with TADs, a Nance button on a palatal arch, or headgear. They were all treated with maxillary and mandibular preadjusted edgewise fixed appliances with 0.022-in slot prescription brackets. They were followed until orthodontic treatment was complete. Seventy-eight patients were randomized in a 1:1:1 ratio among the 3 groups. The baseline characteristics were similar in the groups, and they were treated for an average of 27.4 months (SD, 7.1 months); 71 completed orthodontic treatment. The data were analyzed on a per-protocol basis and showed no differences in the effectiveness of anchorage

  13. Vacuum with mesh is a feasible temporary closure device after fascial dehiscence

    DEFF Research Database (Denmark)

    Bjørsum-Meyer, Thomas; Skarbye, Mona; Jensen, Kenneth Højsgaard

    2013-01-01

    INTRODUCTION: The open abdomen is a challenging condition and a temporary abdominal closure device is required in order to protect the intra-abdominal viscera. We aimed to evaluate the feasibility of a recent device: vacuum-assisted wound closure and mesh-mediated fascial traction (VAWCM) after...... fascial dehiscence focusing on fascial closure rate, mortality and procedure-related complications. MATERIAL AND METHODS: We performed a retrospective study on 18 patients treated with VAWCM after fascial dehiscence who were consecutively admitted to the Department of Surgery, Slagelse Hospital, between......, respectively, with a median of six (1-11) tightenings. One patient developed an intra-abdominal abscess. Three patients survived until discharge without having obtained delayed primary closure. In two of these patients, the fascial edges were adapted with a prosthetic mesh and one patient was left...

  14. Vacuum with mesh is a feasible temporary closure device after fascial dehiscence.

    Science.gov (United States)

    Bjørsum-Meyer, Thomas; Skarbye, Mona; Jensen, Kenneth Højsgaard

    2013-11-01

    The open abdomen is a challenging condition and a temporary abdominal closure device is required in order to protect the intra-abdominal viscera. We aimed to evaluate the feasibility of a recent device: vacuum-assisted wound closure and mesh-mediated fascial traction (VAWCM) after fascial dehiscence focusing on fascial closure rate, mortality and procedure-related complications. We performed a retrospective study on 18 patients treated with VAWCM after fascial dehiscence who were consecutively admitted to the Department of Surgery, Slagelse Hospital, between October 2008 and October 2012. The 18 patients had a median age of 64 (29-90) years. 80% (12/15) obtained delayed primary abdominal closure. The in-hospital mortality was 17% (3/18). The median treatment period with VAWCM and vacuum-assisted wound closure were 18 (7-34) and 21 (7-53) days, respectively, with a median of six (1-11) tightenings. One patient developed an intra-abdominal abscess. Three patients survived until discharge without having obtained delayed primary closure. In two of these patients, the fascial edges were adapted with a prosthetic mesh and one patient was left with a planned ventral hernia. We performed a retrospective follow-up with a median duration of 21 months 21% developed an incisional hernia. Two patients died within 60 days after closure of the abdomen. We found and that VAWCM is a safe and useful technique for delayed primary closure of the open abdomen after fascial dehiscence. We stress the need for more studies on temporary abdominal closure devices in selected groups of patients. not relevant. not relevant.

  15. [Skeletal anchorage in the past, today and tomorrow].

    Science.gov (United States)

    Melsen, Birte; Dalstra, Michel

    2017-03-01

    Skeletal anchorage was not introduced as an alternative to conventional anchorage modalities. The first skeletal anchorage was a ligature through a hole in the infrazygomatic crest. This was replaced by surgical screws and finally the TADs, which were optimized with respect to the material and morphology, were developed. A bracket-like head allows for the use of the mini-implant as indirect anchorage, but should not be a tool for lost control resulting from badly planned biomechanics or failing compliance. Skeletal anchorage should serve as an adjunct to correct biomechanics, to enable treatments that could not be performed prior to the introduction of skeletal anchorage. The aim of this study was to test the hypothesis that temporary anchorage mini-screws help maintain bone density, height and width of alveolar processes in the extraction sites, and thus prevent the thinning of the alveolar ridge usually observed. In adult patients with degenerated dentitions the application of skeletal anchorage can allow for the displacement of teeth where no anchorage units are present, but also for the redevelopment and maintenance of atrophic alveolar bone. The basis for the optimal use of skeletal anchorage is that the correct line of action for the desired tooth displacement is defined and the necessary force system constructed either with the skeletal anchorage as direct or as indirect anchorage. After a period, during which osseointegrated implants were used as anchorage for tooth movement and bone maintenance, it was accepted that the mini-implants could serve also as anchorage for skeletal displacements avoiding loading of teeth. © EDP Sciences, SFODF, 2017.

  16. Indian Board of Orthodontics case report: Orthodontic management of vertical excess using skeletal anchorage

    Directory of Open Access Journals (Sweden)

    Ajit J Kalia

    2016-01-01

    Full Text Available B.B., a 21-year-old girl, presented with the chief complaint of forwardly placed upper front teeth and gummy smile. Diagnosis revealed prognathic maxilla and average mandible, Class II skeletal base with vertical growth pattern, end-on molars and Class II canine relationship bilaterally, convex profile, potentially incompetent lips, gummy smile, and protrusive lower lip. The patient′s treatment plan was extraction of all first bicuspids and retraction using temporary anchorage devices. Anchorage was reinforced using microimplants in the maxillary arch and second molar banding in the mandibular arch. The implants were placed high up in the vestibule to have more of an intrusive component and to reduce gummy smile at the end of the treatment.

  17. Risks and complications of miniscrew anchorage in clinical orthodontics

    Directory of Open Access Journals (Sweden)

    Shingo Kuroda, DDS, PhD

    2014-11-01

    Full Text Available Miniscrew anchorage has greatly expanded the limit of clinical orthodontics. Even without patient compliance, miniscrews can provide stationary anchorages for various tooth movements and even make it possible to move the tooth in directions which have been impossible with traditional orthodontic mechanics. On the other hand, the clinical use of miniscrew anchorage includes some risks. Screw fracture might be one of the most undesirable side effects in clinical use of miniscrew anchorage, which occurs in not only the placement but also the removal. A lot of factors are suggested to relate with screw failure, but screw-root proximity and the mandible are considered as two common factors. Damages of soft tissues are temporary in most cases, but damages of hard tissues are irreversible and should be avoided. We have to understand these risks and complications of miniscrew anchorage, and pay attention for their safety-conscious use.

  18. Temporary abdominal closure with zipper-mesh device for management of intra-abdominal sepsis

    Directory of Open Access Journals (Sweden)

    Edivaldo Massazo Utiyama

    Full Text Available OBJECTIVE: to present our experience with scheduled reoperations in 15 patients with intra-abdominal sepsis. METHODS: we have applied a more effective technique consisting of temporary abdominal closure with a nylon mesh sheet containing a zipper. We performed reoperations in the operating room under general anesthesia at an average interval of 84 hours. The revision consisted of debridement of necrotic material and vigorous lavage of the involved peritoneal area. The mean age of patients was 38.7 years (range, 15 to 72 years; 11 patients were male, and four were female. RESULTS: forty percent of infections were due to necrotizing pancreatitis. Sixty percent were due to perforation of the intestinal viscus secondary to inflammation, vascular occlusion or trauma. We performed a total of 48 reoperations, an average of 3.2 surgeries per patient. The mesh-zipper device was left in place for an average of 13 days. An intestinal ostomy was present adjacent to the zipper in four patients and did not present a problem for patient management. Mortality was 26.6%. No fistulas resulted from this technique. When intra-abdominal disease was under control, the mesh-zipper device was removed, and the fascia was closed in all patients. In three patients, the wound was closed primarily, and in 12 it was allowed to close by secondary intent. Two patients developed hernia; one was incisional and one was in the drain incision. CONCLUSION: the planned reoperation for manual lavage and debridement of the abdomen through a nylon mesh-zipper combination was rapid, simple, and well-tolerated. It permitted effective management of severe septic peritonitis, easy wound care and primary closure of the abdominal wall.

  19. Bone anchorage: When and why?

    Directory of Open Access Journals (Sweden)

    Ahmet Nejat Erverdi

    2015-01-01

    Full Text Available Anchorage is the most important concept in biomechanics of orthodontics. In contemporary orthodontics, bone anchorage is a magic tool, which decreased the indication for extraoral appliances greatly and at the same time achieving stationary anchorage became possible. However, the indication for bone anchorage has to be clarified carefully. Skeletal open-bite treatment, effective molar distalization, Class III treatment by using chin anchorage, and space closure in severe minimal anchorage cases are some examples for bone anchorage supported orthodontic treatment. Here, we discussed three necessary usages of bone anchorage for different treatment modalities.

  20. TERRAIN, Anchorage, Alaska

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — The Anchorage AOI consists of seven areas. These areas were to be collected to the 'highest' accuracy requirement. Ground Control is collected throughout the AOI for...

  1. The benefit of differential moment concept in managing posterior anchorage and avoiding bite deepening

    Directory of Open Access Journals (Sweden)

    Harryanto Wijaya

    2012-09-01

    Full Text Available Background: Anchorage is one of the major concerns in orthodontic space closure. Various methods have been proposed to enhance posterior anchorage in space closure such as headgear, Nance holding appliance, and micro implant as temporary anchorage devices. However, several issues such as patient's compliance, appliance effectiveness, and cost of the device become many clinicians concern. The differential moment concept in segmented arch is a technique that requires no patient compliance but can effectively manage posterior anchorage and avoid bite deepening by careful application of forces and moments. Purpose: The purpose of this case report is to show the use of differential moment concept in segmented arch technique to manage posterior anchorage and to avoid bite deepening. Case: A 21 years old female patient with protrusive teeth as her chief complaint was treated using fixed orthodontic appliance. Case management: The treatment included four first bicuspid extraction and space closure utilizing differential moment concept in segmented arch. Conclusion: It can be concluded that application of differential moment concept in segmented arch technique is a non invasive, compliance independent, effective, and cost efficient method to manage posterior anchorage and to avoid bite deepening.latar belakang: Penjangkaran merupakan salah satu aspek yang sering kali menjadi masalah dalam penutupan ruang pada perawatan ortodonti. Berbagai metode disarankan untuk memperkuat penjangkaran posterior dalam penutupan ruang seperti headgear, piranti penahan Nance, dan implan mikro sebagai alat penjangkar sementara. Namun demikian, beberapa hal seperti kerjasama pasien, efektivitas piranti, dan biaya dari alat-alat tersebut sering menjadi perhatian/pertimbangan bagi klinisi. Konsep momen diferensial pada segmented arch adalah suatu cara yang efektif untuk memperkuat penjangkaran dan menghindari pendalaman gigitan tanpa memerlukan kerjasama pasien. tujuan

  2. 78 FR 9010 - Dental Devices; Reclassification of Temporary Mandibular Condyle Prosthesis

    Science.gov (United States)

    2013-02-07

    ... Food, Drug, and Cosmetic Act (the FD&C Act), as amended by the Medical Device Amendments of 1976 (the... notification is not necessary to assure the safety and effectiveness of the device. II. Regulatory History of... class II. The new information includes the history of use of the device and the relative absence of...

  3. A Novel Rat Model of Orthodontic Tooth Movement Using Temporary Skeletal Anchorage Devices: 3D Finite Element Analysis and In Vivo Validation

    Directory of Open Access Journals (Sweden)

    Neelambar Kaipatur

    2014-01-01

    Full Text Available The aim of this animal study was to develop a model of orthodontic tooth movement using a microimplant as a TSAD in rodents. A finite element model of the TSAD in alveolar bone was built using μCT images of rat maxilla to determine the von Mises stresses and displacement in the alveolar bone surrounding the TSAD. For in vivo validation of the FE model, Sprague-Dawley rats (n=25 were used and a Stryker 1.2 × 3 mm microimplant was inserted in the right maxilla and used to protract the right first permanent molar using a NiTi closed coil spring. Tooth movement measurements were taken at baseline, 4 and 8 weeks. At 8 weeks, animals were euthanized and tissues were analyzed by histology and EPMA. FE modeling showed maximum von Mises stress of 45 Mpa near the apex of TSAD but the average von Mises stress was under 25 Mpa. Appreciable tooth movement of 0.62 ± 0.04 mm at 4 weeks and 1.99 ± 0.14 mm at 8 weeks was obtained. Histological and EPMA results demonstrated no active bone remodeling around the TSAD at 8 weeks depicting good secondary stability. This study provided evidence that protracted tooth movement is achieved in small animals using TSADs.

  4. Anchorage Receives Record Snowfall

    Science.gov (United States)

    2002-01-01

    The forecast called for flurries, but the snow accumulated on the ground in Anchorage, Alaska, at the rate of 2 inches per hour (5 cm per hour) for much of Saturday, March 16, 2002. By the time the winter storm passed on Sunday afternoon, Anchorage had received 28.6 inches (72.6 cm) of snow, surpassing by far the previous record of 15.6 inches (39.6 cm) set on December 29, 1955. Flights were canceled and schools were closed as a result of the storm. This true-color image of Alaska was acquired by the Sea-viewing Wide Field-of-view Sensor (SeaWiFS), flying aboard the OrbView-2 satellite, on March 18. It appears another large, low-pressure system is heading toward the Anchorage region, which could bring substantially more snowfall. The low-pressure system can be identified by the characteristic spiral pattern of clouds located off Alaska's southwestern coast in this scene.

  5. The use of miniature implants as orthodontic anchorage in dogs

    OpenAIRE

    Toru, DEGUCHI; Ryuzo, KANOMI; Lawerence, GARETTO P.; Eugene, ROBERTS W.; Teruko, TAKANO; Department of Orthodontics, Okayama University Graduate School of Medicine and Dentistry; Kanomi Dental Clinic; Department of Oral Facial Development, Indiana University School of Dentistry; Department of Oral Facial Development, Indiana University School of Dentistry; Department of Orthodontics, Okayama University Graduate School of Medicine and Dentistry

    2002-01-01

    In the past decade, there have been many attempts to use implants as anchorage devices. Unfortunately, previous reports limit the use of these implants for anchorage because of their large size. Clinically, in cases such as intrusion of molars are necessary, small implants placed between the roots of teeth would be a great benefit for the orthodontist. The objective of this study was to histomorphometrically (static) analyze the use of miniature implants. A total of 20 miniature implants (1.0...

  6. 78 FR 79308 - Dental Devices; Reclassification of Temporary Mandibular Condyle Prosthesis

    Science.gov (United States)

    2013-12-30

    ... INFORMATION: I. Background--Regulatory Authorities The Federal Food, Drug, and Cosmetic Act (the FD&C Act), as... reclassification to class II (special controls) would allow TMCRPs to enter the market and be used off-label for... controls to legally market their class II devices. These revisions do not represent a change in FDA's...

  7. Bridge to transplantation using paracorporeal biventricular assist devices or the syncardia temporary total artificial heart: is there a difference?

    Science.gov (United States)

    Nguyen, A; Pozzi, M; Mastroianni, C; Léger, P; Loisance, D; Pavie, A; Leprince, P; Kirsch, M

    2015-06-01

    Biventricular support can be achieved using paracorporeal ventricular assist devices (p-BiVAD) or the Syncardia temporary total artificial heart (t-TAH). The purpose of the present study was to compare survival and morbidity between these devices. Data from 2 French neighboring hospitals were reviewed. Between 1996 and 2009, 148 patients (67 p-BiVADs and 81 t-TAH) underwent primary, planned biventricular support. There were 128 (86%) males aged 44±13 years. Preoperatively, p-BiVAD recipients had significantly lower systolic and diastolic blood pressures, more severe hepatic cytolysis and higher white blood cell counts than t-TAH recipients. In contrast, t-TAH patients had significantly higher rates of pre-implant ECLS and hemofiltration. Mean support duration was 79±100 days for the p-BiVAD group and 71±92 for t-TAH group (P=0.6). Forty two (63%) p-BiVAD recipients were bridged to transplantation (39, 58%) or recovery (3, 5%), whereas 51 (63%) patients underwent transplantation in the t-TAH group. Death on support was similar between groups (p-BiVAD, 26 (39%); t-TAH, 30 (37%); P=0.87). Survival while on device was not significantly different between patient groups and multivariate analysis showed that only preimplant diastolic blood pressure and alanine amino-transferase levels were significant predictors of death. Post-transplant survival in the p-BiVAD group was 76±7%, 70±8%, and 58±9% at 1, 3, and 5 years after transplantation, respectively, and was similar to that of the t-TAH group (77±6%, 72±6%, and 70±7%, P=0.60). Survival while on support and up to 5 years after heart transplantation was not significantly different in patients supported by p-BiVADs or t-TAH. Multivariate analysis revealed that survival while on transplantation was not affected by the type of device implanted.

  8. Cardiovascular devices; reclassification of nonroller-type cardiopulmonary bypass blood pumps for cardiopulmonary and circulatory bypass; effective date of requirement for premarket approval for nonroller-type cardiopulmonary bypass blood pumps for temporary ventricular support. Final order.

    Science.gov (United States)

    2015-06-08

    The Food and Drug Administration (FDA) is issuing a final order to reclassify nonroller-type cardiopulmonary bypass blood pump (NRP) devices for cardiopulmonary and circulatory bypass, a preamendments class III device, into class II (special controls), and to require the filing of a premarket approval application (PMA) for NRP devices for temporary ventricular support. FDA is also revising the title and identification of the regulation for NRP devices in this order.

  9. 33 CFR 401.50 - Anchorage areas.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Anchorage areas. 401.50 Section... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.50 Anchorage areas. Except in an... of the Seaway except in the following designated anchorage areas: (a) Point Fortier (Lake St. Louis...

  10. Anchorage strategies in geriatric hip fracture management

    Directory of Open Access Journals (Sweden)

    Knobe Matthias

    2016-12-01

    Full Text Available There is an enormous humanitarian and socioeconomic need to improve the quality and effectiveness of care for patients with hip fracture. To reduce mechanical complications in the osteosynthesis of proximal femoral fractures, improved fixation techniques have been developed including blade or screw-anchor devices, locked minimally invasive or cement augmentation strategies. However, despite numerous innovations and advances regarding implant design and surgical techniques, systemic and mechanical complication rates remain high. Treatment success depends on secure implant fixation in often-osteoporotic bone as well as on patient-specific factors (fracture stability, bone quality, comorbidity, and gender and surgeon-related factors (experience, correct reduction, and optimal screw placement in the head/neck fragment. For fracture fixation, the anchorage of the lag screw within the femoral head plays a crucial role depending on the implant’s design. Meta-analyses and randomized controlled studies demonstrate that there is a strong trend towards arthroplasty treating geriatric femoral neck fractures. However, for young adults as well as older patients with less compromised bone quality, or in undisplaced fractures, head-preserving therapy is preferred as it is less invasive and associated with good functional results. This review summarizes the evidence for the internal fixation of femoral neck fractures and trochanteric femoral fractures in elderly patients. In addition, biomechanical considerations regarding implant anchorage in the femoral head including rotation, migration, and femoral neck shortening are made. Finally, cement augmentation strategies for hip fracture implants are evaluated critically.

  11. 21 CFR 872.3770 - Temporary crown and bridge resin.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Temporary crown and bridge resin. 872.3770 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3770 Temporary crown and bridge resin. (a) Identification. A temporary crown and bridge resin is a device composed of a material, such as...

  12. Towards a workflow driven design for mHealth devices within temporary eye clinics in low-income settings.

    Science.gov (United States)

    Bolster, Nigel M; Bastawrous, Andrew; Giardini, Mario E

    2015-01-01

    Only a small minority of mobile healthcare technologies that have been successful in pilot studies have subsequently been integrated into healthcare systems. Understanding the reasons behind this discrepancy is crucial if such technologies are to be adopted. We believe that the mismatch is due to a breakdown in the relation between technical soundness of the original mobile health (mHealth) device design, and integration into healthcare provision workflows. Quantitative workflow modelling provides an opportunity to test this hypothesis. In this paper we present our current progress in developing a clinical workflow model for mobile eye assessment in low-income settings. We test the model for determining the appropriateness of design parameters of a mHealth device within this workflow, by assessing their impact on the entire clinical workflow performance.

  13. 76 FR 76295 - Anchorage Regulations; Wells, ME

    Science.gov (United States)

    2011-12-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 110 RIN 1625-AA01 Anchorage Regulations; Wells, ME AGENCY: Coast Guard, DHS. ACTION: Final rule. SUMMARY: The Coast Guard is establishing three special anchorage areas in...

  14. Comparison of intrusion effects on maxillary incisors among mini implant anchorage, j-hook headgear and utility arch.

    Science.gov (United States)

    Jain, Ravindra Kumar; Kumar, Sridhar Prem; Manjula, W S

    2014-07-01

    Intrusion of maxillary incisors is one of the most important and difficult tooth movements to achieve as a part of orthodontic therapy. A variety of techniques were used in the past to intrude the maxillary incisors before the emergence of mini implants in Orthodontics. Mini implants are temporary anchorage devices used to produce various tooth movements. The research was carried out to evaluate and compare the efficiency of producing intrusion of maxillary incisors using mini implants, utility arch and j- hook headgear. The study was conducted on 30 subjects divided into 3 Groups equally. Group 1- mini implant anchorage, Group 2 - j- hooks headgear and Group 3- utility arch were used for intrusion of the maxillary incisors. Conventional lateral cephalograms were taken before treatment and at the end of intrusion. Five cephalometric parameters were used to measure the amount of intrusion attained in each Group. Intra Group comparisons were done using student t-test and inter Group comparisons were done using ANOVA The duration of intrusion was four months in all the three Groups. In Group 1 the mean average intrusion attained was 2.1 mm, the mean average intrusion attained in Group 2 was 0.7 mm, and the mean average intrusion achieved in Group 3 was 1.4 mm with a side effect of 0.75 mm of molar extrusion. Although, both mini implants and utility arch can be used to attain significant amounts of incisor intrusion but using mini implants will produce true intrusion without any other side effects.

  15. Advances in cell culture: anchorage dependence

    Science.gov (United States)

    Merten, Otto-Wilhelm

    2015-01-01

    Anchorage-dependent cells are of great interest for various biotechnological applications. (i) They represent a formidable production means of viruses for vaccination purposes at very large scales (in 1000–6000 l reactors) using microcarriers, and in the last decade many more novel viral vaccines have been developed using this production technology. (ii) With the advent of stem cells and their use/potential use in clinics for cell therapy and regenerative medicine purposes, the development of novel culture devices and technologies for adherent cells has accelerated greatly with a view to the large-scale expansion of these cells. Presently, the really scalable systems—microcarrier/microcarrier-clump cultures using stirred-tank reactors—for the expansion of stem cells are still in their infancy. Only laboratory scale reactors of maximally 2.5 l working volume have been evaluated because thorough knowledge and basic understanding of critical issues with respect to cell expansion while retaining pluripotency and differentiation potential, and the impact of the culture environment on stem cell fate, etc., are still lacking and require further studies. This article gives an overview on critical issues common to all cell culture systems for adherent cells as well as specifics for different types of stem cells in view of small- and large-scale cell expansion and production processes. PMID:25533097

  16. Mini-implants and miniplates generate sub-absolute and absolute anchorage

    Directory of Open Access Journals (Sweden)

    Alberto Consolaro

    2014-06-01

    Full Text Available The functional demand imposed on bone promotes changes in the spatial properties of osteocytes as well as in their extensions uniformly distributed throughout the mineralized surface. Once spatial deformation is established, osteocytes create the need for structural adaptations that result in bone formation and resorption that happen to meet the functional demands. The endosteum and the periosteum are the effectors responsible for stimulating adaptive osteocytes in the inner and outer surfaces.Changes in shape, volume and position of the jaws as a result of skeletal correction of the maxilla and mandible require anchorage to allow bone remodeling to redefine morphology, esthetics and function as a result of spatial deformation conducted by orthodontic appliances. Examining the degree of changes in shape, volume and structural relationship of areas where mini-implants and miniplates are placed allows us to classify mini-implants as devices of subabsolute anchorage and miniplates as devices of absolute anchorage.

  17. 76 FR 78185 - Anchorage Regulations: Subpart A-Special Anchorage Regulations, Newport Bay Harbor, CA

    Science.gov (United States)

    2011-12-16

    ... proposed rule also would update the description of the existing special anchorage areas to use geographic.... 110.95 to designate anchorage areas using geographic coordinates rather than channel lights and other... can safely navigate around the anchored vessels. If you think that your business, organization, or...

  18. Biofilm formation on surface characterized micro-implants for skeletal anchorage in orthodontics

    NARCIS (Netherlands)

    Chin, Yeen; Sandham, John; de Vries, Jacob; van der Mei, Henderina; Busscher, Hendrik

    Micro-implants are increasingly popular in clinical orthodontics to effect skeletal anchorage. However, biofilm formation on their surfaces and subsequent infection of peri-implant tissues can result in either exfoliation or surgical removal of these devices. The present study aimed to assess

  19. Treatment of a skeletal Class II malocclusion using fixed functional appliance with miniplate anchorage

    OpenAIRE

    Celikoglu, Mevlut; Unal, Tuba; Bayram, Mehmet; Candirli, Celal

    2014-01-01

    Based on our literature search, we found that the use of miniplate anchorage with Forsus fatigue-resistance device (FRD) has not yet been reported. Therefore, the aim of the present case report was to present the treatment of a patient with skeletal Class II malocclusion with mandibular retrusion using Forsus FRD with miniplate anchorage. Fixed appliances with 0.022-inch slots were attached to the maxillary teeth and after 8 months of the leveling and alignment of the upper arch, 0.019 × 0.02...

  20. PEM Anchorage on Titanium Using Catechol Grafting

    Science.gov (United States)

    Marie, Hélène; Barrere, Amélie; Schoentstein, Frédérique; Chavanne, Marie-Hélène; Grosgogeat, Brigitte; Mora, Laurence

    2012-01-01

    Background This study deals with the anchorage of polyelectrolyte films onto titanium surfaces via a cathecol-based linker for biomedical applications. Methodology The following study uses a molecule functionalized with a catechol and a carboxylic acid: 3-(3,4-dihydroxyphenyl)propanoic acid. This molecule is anchored to the TiO2 substrate via the catechol while the carboxylic acid reacts with polymers bearing amine groups. By providing a film anchorage of chemisorption type, it makes possible to deposit polyelectrolytes on the surface of titanium. Principal Findings Infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), contact angle and atomic force microscopy (AFM) measurements show that the different steps of grafting have been successfully performed. Conclusions This method based on catechol anchorage of polyelectrolytes open a window towards large possibilities of clinical applications. PMID:23226262

  1. Bodily distalization of molars with absolute anchorage.

    Science.gov (United States)

    Keles, Ahmet; Erverdi, Nejat; Sezen, Serdar

    2003-08-01

    Palatal implants have been used over the last two decades to eliminate headgear wear and to establish stationary anchorage. In this case report, the stability of a palatal implant for distalization of molars bodily and for anchorage maintenance was assessed. The implant was a stepped screw titanium (4.5 mm diameter x 8 mm length), and it was placed in the palatal region for orthodontic purposes. A surgical template containing a metal drill housing was prepared. Angulation of the drill housing was controlled according to the radiologic tracing of the maxilla transferred to a plaster cast section in the paramedian plane. The implant was placed using a noninvasive technique (incision, flap, and suture elimination) and left transmucosally to facilitate the surgical procedure and to reduce the number of operations. The paramedian region was selected (1) to avoid the connective tissues of the palatine suture and (2) because it is considered to be a suitable host site for implant placement. After three months of healing, the implant was osseointegrated and orthodontic treatment was initiated. For molar distalization, the Keles Slider appliance was modified and, instead of a Nance button, a palatal implant was used for anchorage. The results showed that the molars were distalized bodily at five months, and no anchorage loss was observed. At the end of the treatment, the smile was improved, and an ideal Class I molar and canine relationship, an ideal overbite, and an ideal overjet were all achieved. In conclusion, palatal implants can be used effectively for anchorage maintenance and in space-gaining procedures. Use of a three-dimensional surgical template eliminated implant placement errors, reduced chair time, minimized trauma to the tissues, and enhanced osseointegration. This method can be used effectively to achieve distalization of molars bodily without anchorage loss.

  2. Effect of miniscrew angulation on anchorage resistance.

    Science.gov (United States)

    Woodall, Niles; Tadepalli, Srinivas C; Qian, Fang; Grosland, Nicole M; Marshall, Steve D; Southard, Thomas E

    2011-02-01

    Even though the use of titanium miniscrews to provide orthodontic anchorage has become increasingly popular, there is no universally accepted screw-placement protocol. Variables include the presence or absence of a pilot hole, placement through attached or unattached soft tissue, and angle of placement. The purpose of this in-vitro study was to test the hypothesis that screw angulation affects screw-anchorage resistance. Three-dimensional finite element models were created to represent screw-placement orientations of 30°, 60°, and 90°, while the screw was displaced to 0.6 mm at a distance of 2.0 mm from the bone surface. In a parallel cadaver study, 96 titanium alloy screws were placed into 24 hemi-sected maxillary and 24 hemi-sected mandibular specimens between the first and second premolars. The specimens were randomly and evenly divided into 3 groups according to screw angulation (relative to the bone surface): 90° vs 30° screw pairs, 90° vs 60° screw pairs, and 30° vs 60° screw pairs. All screws were subjected to increasing forces parallel to the occlusal plane, pulling mesially until the miniscrews were displaced by 0.6 mm. A paired-samples t test was used to assess the significance of differences between 2 samples consisting of matched pairs of subjects, with matched pairs of subjects including 2 measurements taken on the same subject. One-way analysis of variance (ANOVA) with the post-hoc Tukey studentized range test was conducted to determine whether there were significant differences, and the order of those differences, in anchorage resistance values among the 3 screw angulations at maxillary and mandibular sites. The finite element analysis showed that 90° screw placement provided greater anchorage resistance than 60° and 30° placements. In the cadaver study, although the maximum anchorage resistance provided by screws placed at 90° to the cadaver bone surface exceeded, on average, the anchorage resistance of the screws placed at 60°, which

  3. Sliding mechanics with microscrew implant anchorage.

    Science.gov (United States)

    Park, Hyo-Sang; Kwon, Tae-Geon

    2004-10-01

    Three cases are illustrated. One was treated with maxillary microscrew implants, another with mandibular microscrew implants, and the third with both maxillary and mandibular microscrew implants. With the maxillary microscrew implants, the maxillary anterior teeth were retracted bodily with a slight intrusion and all the premolar extraction space was closed without loss of anchorage. Furthermore, the maxillary posterior teeth showed distal movement. The mandibular microscrew implants controlled the vertical position of the mandibular posterior teeth and played an important role in improving the facial profile. The efficacy of sliding mechanics with microscrew implant anchorage on the treatment of skeletal Class II malocclusion is also discussed.

  4. [Impact of anchorage implant design factors on its primary stability].

    Science.gov (United States)

    Zhang, J N; Lu, H P; Zhong, C

    2017-08-09

    During the past decade, the anchorage implants have been widely used in the orthodontic treatment. Many scholars have studied the influence of different factors on anchorage implant's primary stability, including anchorage implant's material properties, structural design, surgical procedure, bone condition, loading force's magnitude and direction. This article is to review the influence of anchorage implant's shape, dimension, neck design and thread design on its primary stability.

  5. Risks and complications of miniscrew anchorage in clinical orthodontics

    OpenAIRE

    Kuroda, Shingo; Tanaka, Eiji

    2014-01-01

    Miniscrew anchorage has greatly expanded the limit of clinical orthodontics. Even without patient compliance, miniscrews can provide stationary anchorages for various tooth movements and even make it possible to move the tooth in directions which have been impossible with traditional orthodontic mechanics. On the other hand, the clinical use of miniscrew anchorage includes some risks. Screw fracture might be one of the most undesirable side effects in clinical use of miniscrew anchorage, whic...

  6. Paradigm shifts in orthodontic treatment with mini-implant anchorage

    Directory of Open Access Journals (Sweden)

    Johnny Joung-Lin Liaw

    2015-01-01

    Full Text Available After the applications of mini-implant anchorage, the envelope of orthodontic treatment was expanded and some treatment modes were changed because of more predictable tooth movement with empowered anchorage. The author tried to share his experience of TADs applications for clarifying the paradigm shifts of orthodontic treatment assisted with the mini-implant anchorage.

  7. Comparison of treatment outcomes between skeletal anchorage and extraoral anchorage in adults with maxillary dentoalveolar protrusion.

    Science.gov (United States)

    Yao, Chung-Chen Jane; Lai, Eddie Hsiang-Hua; Chang, Jenny Zwei-Chieng; Chen, I; Chen, Yi-Jane

    2008-11-01

    The goal of this retrospective cephalometric study was to compare orthodontic outcomes in patients with maxillary dentoalveolar protrusion malocclusion treated with extraoral headgear or mini-implants for maximum anchorage. Forty-seven subjects with Angle Class II malocclusion or Class I bimaxillary dentoalveolar protrusion were treated by retracting the maxillary dentoalveolar process by using the extraction space of the bilateral maxillary first premolars. Two anchorage systems were used. Group 1 (n = 22) received traditional anchorage preparation with a transpalatal arch and headgear; group 2 (n = 25) received mini-implants (miniplates, miniscrews, or microscrews) for bony anchorage. Pretreatment and posttreatment lateral cephalograms were superimposed to compare the following parameters between groups: (1) amount of maxillary central incisor retraction, (2) reduction in maxillary central incisor angulation, (3) anchorage loss of the maxillary first molar, (4) movements of the maxillary central incisor and first molar in the vertical direction, and (5) changes in skeletal measurements representing the anteroposterior and vertical jaw relationships. The skeletal anchorage group had greater anterior tooth retraction (8.17 vs 6.73 mm) and less maxillary molar mesialization (0.88 vs 2.07 mm) than did the headgear group, with a shorter treatment duration (29.81 vs 32.29 months). Translational movement of the incisors was more common than tipping movement, and intrusion of the maxillary dentition was greater, in patients receiving miniplates than in those receiving screw-type bony anchorage, resulting in counterclockwise rotation of the mandible and a statistically significant decrease in the mandibular plane angle. Cephalometric analysis of skeletal measurements in patients with low to average mandibular plane angles showed no significant difference between groups, although greater maxillary incisor retraction and less mesial movement of the first molar were noted in

  8. 77 FR 25587 - Anchorage Regulations; Wells, ME

    Science.gov (United States)

    2012-05-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 110 RIN 1625-AA01 Anchorage Regulations; Wells, ME AGENCY: Coast Guard, DHS. ACTION: Direct final rule; request for comments. SUMMARY: On January 6, 2012, we established...

  9. 76 FR 52599 - Anchorage Regulations; Wells, ME

    Science.gov (United States)

    2011-08-23

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 110 RIN 1625-AA01 Anchorage Regulations; Wells, ME AGENCY: Coast Guard, DHS. ACTION: Notice of proposed rulemaking. SUMMARY: The Coast Guard proposes to establish three...

  10. 76 FR 59596 - Anchorage Regulations; Newport, RI

    Science.gov (United States)

    2011-09-27

    ... size of anchorage ``D'' west of Goat Island, Newport, RI, to safely accommodate up to three cruise... water, water-sheet area, and density of vessel traffic in the vicinity of Newport west of Goat Island... Federal Government and Indian tribes, or on the distribution of power and responsibilities between the...

  11. 77 FR 6010 - Anchorage Regulations; Newport, RI

    Science.gov (United States)

    2012-02-07

    .... Background This rule changes the shape and expands the size of anchorage ``D'' west of Goat Island, Newport... density of vessel traffic in the vicinity of Newport west of Goat Island are sufficient to accommodate..., or on the distribution of power and responsibilities between the Federal Government and Indian tribes...

  12. Comparison between Herbst appliances with or without miniscrew anchorage.

    Science.gov (United States)

    Manni, Antonio; Pasini, Marco; Mauro, Cozzani

    2012-12-01

    Herbst appliance is largely used in orthodontics for the correction of Class II. The aim of this paper was to analyze dental and skeletal effects of a splints Herbst-miniscrews combined device in comparison to a mandibular splints Herbst appliance. Fifty Class II division 1 patients (27 males and 23 females with a mean age of 11.8 ± 1.7 years) were included in the study. Lateral headfilms of 25 patients with a mandibular resin splint and a miniscrew anchorage (test group) and of 25 patients with mandibular acrylic resin splints (control group) were analyzed before (T0) and after (T1) the Herbst treatment. The mean and standard deviation (SD) of each variable were calculated; paired t-test was used to evaluate statistical changes before and after the treatment, in each group and Student t-test was used to compare the two groups. Significant differences were observed for P treatment, mandibular incisor proclination was significantly lower in the test group (2.8°) in comparison to the control group (7.4°). The miniscrew-Herbst system, described in the present study, allows correction of Class II malocclusion, with a lower anchorage loss, in form of mandibular incisor proclination, during the treatment, in comparison to mandibular acrylic splints Herbst.

  13. Orthodontic Anchorage Implants: State-of-the-art

    DEFF Research Database (Denmark)

    Melsen, Birte

    2007-01-01

    The limits of an orthodontic treatment are often set by the lack of suitable anchorage. The mini-implant is used where conventional anchorage cannot be applied and not as a replacement for conventional anchorage. In patients with lack of teeth and reduced periodontium, skeletal anchorage allows...... the optimal positioning of the teeth following rehabilitation. Patients with need for inconsistent tooth movements, borderline surgical cases, can benefit from the use of the mini-implant and regeneration of alveolar process by tooth movement in edentulous molar regions and using mini-implants as anchorage...... will improve the reconstruction possibilities. The mini-implant has widened the orthodontic possibilities....

  14. Procedures adopted by orthodontists for space closure and anchorage control

    Directory of Open Access Journals (Sweden)

    André da Costa Monini

    2013-12-01

    Full Text Available OBJECTIVE: The aim of this study was to identify the procedures adopted by Brazilian orthodontists in the following situations: extraction space closure, anchorage control in case of necessary anchorage for group A and frequency of skeletal anchorage use, especially in the upper jaw. METHOD: A questionnaire was sent to the e-mail address of all dentists registered in the Brazilian Federal Council of Dentistry. RESULTS: The results showed that most Brazilian orthodontists usually perform extraction space closure by means of sliding mechanics. The use of palatal bar, inclusion of second molars in the archwire and space closure performed in two phases are the most used techniques for anchorage control in the upper jaw. The skeletal anchorage is referenced by 36.5% of specialists as a routine practice for the upper jaw anchorage. CONCLUSIONS: There is a wide variety of procedures adopted by Brazilian orthodontists for orthodontic space closure and anchorage control.

  15. 1964 Great Alaska Earthquake: a photographic tour of Anchorage, Alaska

    Science.gov (United States)

    Thoms, Evan E.; Haeussler, Peter J.; Anderson, Rebecca D.; McGimsey, Robert G.

    2014-01-01

    , and small-scale maps, as well as links to slideshows of additional photographs and Google Street View™ scenes. Buildings in Anchorage that were severely damaged, sites of major landslides, and locations of post-earthquake engineering responses are highlighted. The web map can be used online as a virtual tour or in a physical self-guided tour using a web-enabled Global Positioning System (GPS) device. This publication serves the purpose of committing most of the content of the web map to a single distributable document. As such, some of the content differs from the online version.

  16. Dentoalveolar class III treatment using retromolar miniscrew anchorage

    National Research Council Canada - National Science Library

    Poletti, Laura; Silvera, Aimara A; Ghislanzoni, Luis T Huanca

    2013-01-01

    .... Conventional intraoral and extraoral appliances have many disadvantages, including the need for patient cooperation, potential for anchorage loss, and vertical extrusion of upper molars and lower incisors...

  17. Assessing the Frequency and Material Consequences of Collisions with Vessels Lying at an Anchorage in Line with IALA iWrap MkII

    Directory of Open Access Journals (Sweden)

    Hans-Christoph Burmeister

    2014-03-01

    Full Text Available This paper proposes a collision model for ships underway and temporary objects as an extension to state-of-the-art maritime risk assessment like IALA iWrap MkII. It gives a brief review of frequency modeling's and consequence calculation theory as well as its applications, before it analogously derives a model to assess the risk of anchorage areas. Subsequently, its benefit is demonstrated by an example scenario.

  18. Orthodontic treatment with skeletal anchorage system

    Directory of Open Access Journals (Sweden)

    Arya Brahmanta

    2011-06-01

    Full Text Available Background: Correction of class I malocclusion with bimaxillary dental protrusion and unilateral free end right upper ridge in adult patient is one of difficult biomechanical case in orthodontics. Due to this case that needs proper anchorage for upper incisor retraction with missing teeth in the right posterior segment. Purpose: The aim of this study to find an effective therapy for correction of bimaxillary protrusion with unilateral free and ridge. Case: A female patient, 36 year old complaining for the difficulty of lip closure due to severe bimaxillary protrusion with incompetence lip. Case management: Firstly correction of the maxillary and mandibular incisor proclination were done by extraction of the mandibular first premolar, the maxillary second premolar on left side and finally placement of miniplates implant in the zygomatic process on right side as an absolut anchorage. Conclusion: Skeletal anchorage system (SAS can be considered as an effective therapy for corection of bimaxillary protrusion with unilateral free end ridge.Latar belakang: Koreksi dari maloklusi klas I dari penderita dewasa yang disertai protrusi bimaksiler dengan kehilangan gigi posterior pada regio kanan atas merupakan salah satu kasus sulit untuk dikerjakan terutama berhubungan dengan biomekanik pergerakan giginya dalam perawatan ortodonti. Tujuan: Tujuan dari penulisan artikel ini adalah untuk menemukan terapi yang efektif untuk perbaikan protrusi bimaksiler dan kehilangan gigi posterior pada satu sisi. Kasus: Seorang penderita wanita usia 35 tahun datang dengan keluhan utama kesulitan untuk menutup mulut oleh karena gigi rahang atas dan rahang bawahnya maju dan bibirnya tidak kompeten. Tatalaksana kasus: Koreksi pada gigi insisivus rahang atas dan insisivus rahang bawah yang protrusi dilakukan dengan melakukan pencabutan terlebih dahulu pada gigi premolar pertama dirahang bawah sisi kanan dan sisi kiri serta pencabutan pada gigi premolar kedua di rahang atas sisi

  19. Impedance-Based Cable Force Monitoring in Tendon-Anchorage Using Portable PZT-Interface Technique

    Directory of Open Access Journals (Sweden)

    Thanh-Canh Huynh

    2014-01-01

    Full Text Available In this paper, a portable PZT interface for tension force monitoring in the cable-anchorage subsystem is developed. Firstly, the theoretical background of the impedance-based method is presented. A few damage evaluation approaches are outlined to quantify the variation of impedance signatures. Secondly, a portable PZT interface is designed to monitor impedance signatures from the cable-anchorage subsystem. One degree-of-freedom analytical model of the PZT interface is established to explain how to represent the loss of cable force from the change in the electromechanical impedance of the PZT interface as well as reducing the sensitive frequency band by implementing the interface device. Finally, the applicability of the proposed PZT-interface technique is experimentally evaluated for cable force-loss monitoring in a lab-scaled test structure.

  20. Treatment of a skeletal Class II malocclusion using fixed functional appliance with miniplate anchorage

    Science.gov (United States)

    Celikoglu, Mevlut; Unal, Tuba; Bayram, Mehmet; Candirli, Celal

    2014-01-01

    Based on our literature search, we found that the use of miniplate anchorage with Forsus fatigue-resistance device (FRD) has not yet been reported. Therefore, the aim of the present case report was to present the treatment of a patient with skeletal Class II malocclusion with mandibular retrusion using Forsus FRD with miniplate anchorage. Fixed appliances with 0.022-inch slots were attached to the maxillary teeth and after 8 months of the leveling and alignment of the upper arch, 0.019 × 0.025-inch stainless steel archwire was inserted and cinched back. Two weeks after the placement of the miniplates bilaterally at the symphysis of the mandible, Forsus FRD was adjusted to the miniplates with a 35-mm length of rod chosen. Nine months after the skeletal anchored Forsus worn, Class I canine and molar relations were achieved and overjet was eliminated. PMID:24966783

  1. Treatment of a skeletal Class II malocclusion using fixed functional appliance with miniplate anchorage.

    Science.gov (United States)

    Celikoglu, Mevlut; Unal, Tuba; Bayram, Mehmet; Candirli, Celal

    2014-04-01

    Based on our literature search, we found that the use of miniplate anchorage with Forsus fatigue-resistance device (FRD) has not yet been reported. Therefore, the aim of the present case report was to present the treatment of a patient with skeletal Class II malocclusion with mandibular retrusion using Forsus FRD with miniplate anchorage. Fixed appliances with 0.022-inch slots were attached to the maxillary teeth and after 8 months of the leveling and alignment of the upper arch, 0.019 × 0.025-inch stainless steel archwire was inserted and cinched back. Two weeks after the placement of the miniplates bilaterally at the symphysis of the mandible, Forsus FRD was adjusted to the miniplates with a 35-mm length of rod chosen. Nine months after the skeletal anchored Forsus worn, Class I canine and molar relations were achieved and overjet was eliminated.

  2. Anchorage of Main Reinforcement in Lightweight Aggregate Concrete Beams

    DEFF Research Database (Denmark)

    Larsen, Henning

    1999-01-01

    The paper deals with the anchorage of reinforcement bars at end supports in beam component made of lightweight aggregate concrete with open structure.......The paper deals with the anchorage of reinforcement bars at end supports in beam component made of lightweight aggregate concrete with open structure....

  3. 75 FR 76275 - Anchorage Regulations; Long Island Sound

    Science.gov (United States)

    2010-12-08

    ... SECURITY Coast Guard 33 CFR Part 110 RIN 1625-AA01 Anchorage Regulations; Long Island Sound AGENCY: Coast... grounds in Long Island Sound. These anchorages are located in Connecticut and New York State waters. This..., particularly deep draft vessels, transiting Long Island Sound or awaiting entry to a port or facility in New...

  4. Is skeletal anchorage changing the limit of orthodontics?

    DEFF Research Database (Denmark)

    Melsen, Birte

    2007-01-01

    for the optimal positioning of the teeth before rehabilitation. Patients, with need for inconsistent tooth movements as displacement of all teeth in the same direction or asymmetric displacements, can be treated with the mini-implants. Borderline surgical cases can benefit from the use of mini......-implants. Regeneration of the alveolar process by tooth movement in edentulous molar regions using mini-implants as anchorage will improve the possibilities for reconstruction. The mini-implant serves thus as anchorage for a multiplicity of tooth movements; it can be inserted by the orthodontist, requires no drilling...... and can be loaded immediately. The course will be addressed the following topics: Are the mini-implants replacing conventional anchorage? Why are orthodontic mini-implants necessary? The development of the skeletal anchorage systems The biological basis for the skeletal anchorage systems...

  5. 33 CFR 110.1a - Anchorages under Ports and Waterways Safety Act.

    Science.gov (United States)

    2010-07-01

    ... Waterways Safety Act. 110.1a Section 110.1a Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES ANCHORAGE REGULATIONS § 110.1a Anchorages under Ports and Waterways Safety Act. (a) The anchorages listed in this section are regulated under the Ports and Waterways Safety Act (33...

  6. Class II malocclusion treated with miniscrew anchorage: comparison with traditional orthodontic mechanics outcomes.

    Science.gov (United States)

    Kuroda, Shingo; Yamada, Kazuyo; Deguchi, Toru; Kyung, Hee-Moon; Takano-Yamamoto, Teruko

    2009-03-01

    Anchorage control in patients with severe skeletal Class II malocclusion is a difficult problem in orthodontic treatment. In adults, treatment often requires premolar extractions and maximum anchorage. Recently, incisor retraction with miniscrew anchorage has become a new strategy for treating skeletal Class II patients. In this study, we compared treatment outcomes of patients with severe skeletal Class II malocclusion treated using miniscrew anchorage (n = 11) or traditional orthodontic mechanics of headgear and transpalatal arch (n = 11). Pretreatment and posttreatment lateral cephalograms were analyzed. Both treatment methods, miniscrew anchorage or headgear, achieved acceptable results as indicated by the reduction of overjet and the improvement of facial profile. However, incisor retraction with miniscrew anchorage did not require patient cooperation to reinforce the anchorage and provided more significant improvement of the facial profile than traditional anchorage mechanics (headgear combined with transpalatal arch). Orthodontic treatment with miniscrew anchorage is simpler and more useful than that with traditional anchorage mechanics for patients with Class II malocclusion.

  7. The Temporary Leave Dilemma -

    DEFF Research Database (Denmark)

    Amilon, Anna

    2010-01-01

    Lone mothers have to take care of a sick child with little or no help from the child’s other parent and have to carry all costs connected to leave-taking. This paper empirically tests whether lone mothers take more temporary parental leave to care for sick children than partnered mothers...... and whether parental leave is associated with a signaling cost. The results from this study of Swedish mothers show that lone mothers use more temporary parental leave than partnered mothers. Further, within the group of lone mothers, those with higher socioeconomic status take less temporary parental leave...... than those with lower socioeconomic status, whereas no such differences are found within the group of partnered mothers. One possible interpretation is that signaling costs negatively influence the utilization of temporary parental leave for lone mothers....

  8. Comparison between Herbst appliances with or without miniscrew anchorage

    Directory of Open Access Journals (Sweden)

    Antonio Manni

    2012-01-01

    Conclusions : The miniscrew-Herbst system, described in the present study, allows correction of Class II malocclusion, with a lower anchorage loss, in form of mandibular incisor proclination, during the treatment, in comparison to mandibular acrylic splints Herbst.

  9. Urban contaminants project: Fish and Hood Creeks, Anchorage, Alaska

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Urbanization has decreased water quality and adversely impacted biological communities in the lakes and streams of Anchorage, Alaska (Hock, 1981; Brabets, 1987;...

  10. Temporary internal pacing.

    Science.gov (United States)

    Ortiz Díaz-Miguel, R; Gómez Grande, M L

    2014-12-01

    Technology and insertion techniques for cardiac temporary internal pacing have experienced a remarkable development over the last few years. Despite this fact, the procedure continues to have potentially fatal associated complications. Temporary internal pacing is indicated for the treatment of bradyarrhythmias or tachyarrhythmias refractory to conventional treatment, or arrhythmias causing cardiovascular or clinical instability of the patient. On the other hand, the indications of temporary cardiac pacing are far less well defined than those of permanent pacing. Since the decision of implementing temporary pacing is complex and delicate, it should always be carefully considered, and over-indication should be avoided. We must base these decisions on robust knowledge of the arrhythmias that may benefit from temporary internal pacing, and should also acquire the habit of considering external temporary pacing among other less aggressive treatments, and to make the best use of new technologies such as echocardiography that add accuracy to the procedure. Copyright © 2013 Elsevier España, S.L.U. y SEMICYUC. All rights reserved.

  11. Temporary labour contracts

    CERN Document Server

    1999-01-01

    The five contracts for Temporary Labour assignments on the CERN site (L020/PE, L021/PE, L022/PE, L023/PE and L024/PE) approved by the Finance Committee in March 1996 (CERN/FC/3857) will reach the end of their initial three-year contractual period at the end of December 1999. Following the satisfactory execution of these contracts during this period, CERN requests approval to extend them from January 2000 for the first of the two years foreseen in the original adjudication. The Finance Committee is invited: - to take note that the three-year expenditure for Temporary Labour contracts from 1997 to 1999 will not exceed 19 100 000 Swiss francs, compared to the 18 900 000 Swiss francs estimated at the time of the adjudication in March 1996; - to approve an extension of the present Temporary Labour contracts for the year 2000 for a total amount not exceeding 6 000 000 Swiss francs.

  12. Biomechanical evaluation of subcrestal dental implants with different bone anchorages

    Directory of Open Access Journals (Sweden)

    Bruno Salles SOTTO-MAIOR

    2014-08-01

    Full Text Available This study evaluated the biomechanical influence of apical bone anchorage on a single subcrestal dental implant using three-dimensional finite element analysis (FEA. Four different bone anchorage designs were simulated on a posterior maxillary segment using one implant with platform switching and internal Morse taper connection as follows: 2 mm subcrestal placement with (SW or without (SO the implant apex engaged into the cortical bone or position at bone level with anchorage only in the crestal cortical (BO bone or with bicortical fixation (BW. Each implant received a premolar crown, and all models were loaded with 200 N to simulate centric and eccentric occlusion. The peak tensile and compressive stress and strain were calculated at the crestal cortical, trabecular, and apical cortical bone. The vertical and horizontal implant displacements were measured at the platform level. FEA indicated that subcrestal placement (SW and SO created lower stress and strain in the crestal cortical bone compared with crestal placement (BO and BW models. The SW model exhibited lesser vertical and horizontal implant micromovement compared with the SO and BO models under eccentric loading; however, stress and strain were higher in the apical cortical bone. The BW model exhibited the lowest implant displacement. These results indicate that subcrestal placement decreases the stress in the crestal cortical bone of dental implants, regardless of apical anchorage; however, apical cortical anchorage can be effective in limiting implant displacement. Further studies are required to evaluate the effects of possible remodeling around the apex on the success of subcrestal implants.

  13. On the biomechanics of seedling anchorage

    Science.gov (United States)

    Crouzy, Benoît; Edmaier, Katharina; Perona, Paolo

    2014-05-01

    We propose a minimal model for the response of vegetation to pullout constraints at early development stage. We try to capture both the average mechanical properties of the root system and the stochastic component of the uprooting process of seedlings. We identify a minimal set of relevant physical components in the purpose of quantifying the uprooting process: length of the root fibres, elastic response of the fibres and adhesion between the roots and the soil matrix. We present for validation a dataset extracted from Edmaier et al. (under revision), accounting for 98 uprooting experiments using Avena sativa L. seedlings (common oat), growing in non-cohesive sediment under controlled conditions. The corresponding root system has a very simple architecture, with three root fibres of different lengths. The response of the system to the constraint is however complex: the stress-strain signal presents sudden jumps followed by partial elastic recoveries. The analysis of the jumps and partial recoveries gives an insight into the resilience of the system. The anchorage of less mature seedlings rapidly collapses after the peak force has been reached, while more mature seedlings usually recover from partial failures. We explore this crossover with our validation dataset. The type of seedlings we study has been used in flume experiments investigating the feedbacks between the vegetation and the river morphodynamics (see for example Perona et al. (2012)). An understanding of the characteristics of the uprooting curve (maximal uprooting force and total uprooting work) of such vegetation reveals the ability of seedlings to withstand environmental constraints in terms of duration or intensity (see Edmaier et al., under revision), and is therefore helpful for planning future experiments. REFERENCES - P. Perona, P. Molnar, B. Crouzy, E. Perucca, Z. Jiang, S. McLelland, D. Wüthrich, K. Edmaier, R. Francis, C. Camporeale, et al., Biomass selection by floods and related timescales

  14. Skeletal versus conventional intraoral anchorage for the treatment of class II malocclusion: dentoalveolar and skeletal effects

    National Research Council Canada - National Science Library

    Mariani, Lisa; Maino, Giuliano; Caprioglio, Alberto

    2014-01-01

    ... systems used in patients with class II malocclusion: the MGBM system (skeletal anchorage) and Pendulum (intraoral anchorage).The sample comprised 57 patients who were assigned to one of the two treatments...

  15. 77 FR 8252 - Adequacy Status of the Anchorage, Alaska, Carbon Monoxide Maintenance Plan for Transportation...

    Science.gov (United States)

    2012-02-14

    ... AGENCY Adequacy Status of the Anchorage, Alaska, Carbon Monoxide Maintenance Plan for Transportation... budget (MVEB) in the Anchorage, Alaska, Carbon Monoxide (CO) Maintenance Plan, submitted by the State of... monoxide Maintenance Plan for Anchorage, Alaska. EPA's finding was made pursuant to the adequacy review...

  16. Essays on temporary migration

    OpenAIRE

    Mestres Domenech, J.

    2012-01-01

    My thesis dissertation focuses on the temporariness of migration, its diverse effects as well as on migration selection. The first paper, A Dynamic Model of Return Migration analyzes the decision process underlying return migration using a dynamic model. We explain how migrants decide whether to stay or to go back to their home country together with their savings and consumption decisions. We simulate our model with return intentions and perform policy simulations. The se...

  17. Shear and anchorage behaviour of fire exposed hollow core slabs

    NARCIS (Netherlands)

    Fellinger, J.

    2005-01-01

    The fire resistance of hollow core slabs is currently assessed considering flexural failure only. However, fire tests show that shear or anchorage failure can also govern the load bearing behaviour. This paper is based on the dissertation by the author1 and discusses existing and new fire tests. It

  18. Application and Curative Effect of Micro-implant Anchorage in ...

    African Journals Online (AJOL)

    methods cannot achieve. Moreover, it has attracted extensive attention for its advantages of slighter trauma, simpler operation, steadiness, reliable efficacy and limited dependence on the patient [6]. To explore and analyze the application and curative effects of micro - implant anchorages in orthodontics, this study carried ...

  19. 77 FR 54493 - Special Anchorage Area; Stockton Springs, ME

    Science.gov (United States)

    2012-09-05

    ... [Federal Register Volume 77, Number 172 (Wednesday, September 5, 2012)] [Proposed Rules] [Pages 54493-54495] [FR Doc No: 2012-21759] DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 110 [Docket Number USCG-2012-0172] RIN 1625-AA01 Special Anchorage Area; Stockton Springs, ME AGENCY: Coast Guard...

  20. 75 FR 3641 - Television Broadcasting Services; Anchorage, AK

    Science.gov (United States)

    2010-01-22

    ... From the Federal Register Online via the Government Publishing Office FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 73 Television Broadcasting Services; Anchorage, AK AGENCY: Federal Communications... Congressional review Act, see 5 U.S.C. 801(a)(1)(A). List of Subjects in 47 CFR Part 73 Television, Television...

  1. External post-tensioning of cfrp tendons using integrated sleeve-wedge anchorage

    DEFF Research Database (Denmark)

    Schmidt, Jacob Wittrup; Bennitz, Anders; Goltermann, Per

    2012-01-01

    anchorage was obtained using the novel anchorage and that its behaviour is stable and predicatble when short term static load is applied. Desired strengthening was also observed in external post-tensioning on reinforced concrete T-beams. The requirements and definitions on a stable anchorage of CFRP tendons......Strengthening of structures using external post-tension CFRP systems have proven to be anefficient method as such system increases the structural capacity and reduces cracks and deflection. Sufficient anchorage is of significant importance since the anchorage provides the connection between...

  2. Assessment of changes following en-masse retraction with mini-implants anchorage compared to two-step retraction with conventional anchorage in patients with class II division 1 malocclusion: a randomized controlled trial.

    Science.gov (United States)

    Al-Sibaie, Salma; Hajeer, Mohammad Y

    2014-06-01

    No randomized controlled trial has tried to compare treatment outcomes between the sliding en-masse retraction of upper anterior teeth supported by mini-implants and the two-step sliding retraction technique employing conventional anchorage devices. To evaluate skeletal, dental, and soft tissue changes following anterior teeth retraction. Parallel-groups randomized controlled trial on patients with class II division 1 malocclusion treated at the University of Al-Baath Dental School in Hamah, Syria between July 2011 and May 2013. One hundred and thirty-three patients with an upper dentoalveolar protrusion were evaluated and 80 patients fulfilled the inclusion criteria. Randomization was performed using computer-generated tables; allocation was concealed using sequentially numbered opaque and sealed envelopes. Fifty-six participants were analysed (mean age 22.34 ± 4.56 years). They were randomly distributed into two groups with 28 patients in each group (1:1 allocation ratio). Following first premolar extraction, space closure was accomplished using either the en-masse technique with mini-implants or the two-step technique with transpalatal arches (TPAs). The antero-posterior displacements of upper incisal edges and upper first molars were measured on lateral cephalograms at three assessment times. Assessor blinding was employed. A bodily retraction (-4.42 mm; P upper anterior teeth was achieved in the mini-implants group, whereas upper anterior teeth retraction was achieved by controlled palatal tipping in the TPA group. When retracting anterior teeth in patients with moderate to severe protrusion, the en-masse retraction based on mini-implants anchorage gave superior results compared to the two-step retraction based on conventional anchorage in terms of speed, dental changes, anchorage loss, and aesthetic outcomes.

  3. A temporary face support

    Energy Technology Data Exchange (ETDEWEB)

    Popov, V.I.; Bakhtin, V.N.; Tolkachev, N.I.

    1980-03-30

    A temporary face support is proposed. It includes a beam supported by hydraulic jacks on the housing of the cutter-loader with a working tool and rotary pressure regulator. It differs in that to decrease the volume of unsecured roofing in the face space between the leading edge of the beam and the cutting tool of the cutter-loader, the beam is hinged onto the housing of the rotary pressure regulator by a fastened connecting rod, and the hydraulic jacks are provided with additional powered elements with a mechanism that regulates the length of the cut-off plate of the hydraulic pump when the seam pressure changes.

  4. ANCHORAGE MECHANICS OF DIFFERENT TYPES OF ROOT SYSTEMS

    OpenAIRE

    Slobodan B. Mickovski

    2002-01-01

    The research presented in this thesis investigated the functional morphology in rootsystems in relation to their role in providing anchorage and stability for the plant. Theanchorage of different types of root systems was investigated as well as the influence ofseveral environmental factors on their development. The research presented in this studywas completed by carrying out a series of modelling, glasshouse and field experimentsusing physical models and real plants.Model experiments showed...

  5. Optimizing Anterior En Masse Retraction with Miniscrew Anchorage

    Directory of Open Access Journals (Sweden)

    Pavankumar Janardan Vibhute

    2011-01-01

    Full Text Available In severely protrusive patients, skeletal anchorage from miniscrew is often used to avoid anchorage loss with preferred miniscrew location near centre of resistance (Cres of posterior teeth. Biomechanical requirement for directing retraction force towards Cres of posterior teeth demands the insertion of miniscrew in loose mucosa, where risk of infection and failure increases. In addition, undesirable biomechanical side effects on anterior and posterior segments may be possible in all three planes, when continuous arch sliding mechanics are installed with miniscrew anchorage. This paper describes technique of molar-stabilizing power arm (MSPA for simultaneous intrusion and retraction of anteriors with miniscrew placement at attached gingiva between 1st molar and 2nd premolar. Advantages of this technique include (i the need of miniscrews placement in loose mucosa apically near the Cres of the posterior teeth is eliminated, (ii the risk of infection and miniscrew failure is lowered since the miniscrew is placed in attached gingiva rather than the loose mucosa, and (iii by adjusting vertical length or replacing MSPA, alteration of the retraction force vector is possible in all three planes; thus, need of removal and repositioning of the miniscrew (e.g., in correction of occlusal cant can be eliminated.

  6. CFRP Mechanical Anchorage for Externally Strengthened RC Beams under Flexure

    Science.gov (United States)

    Ali, Alnadher; Abdalla, Jamal; Hawileh, Rami; Galal, Khaled

    De-bonding of carbon fiber reinforced polymers (CFRP) sheets and plates from the concrete substrate is one of the major reasons behind premature failures of beams that are externally strengthened with such CFRP materials. To delay or prevent de-bonding and therefore enhancing the load carrying capacity of strengthened beams, several anchorage systems were developed and used. This paper investigates the use of CFRP mechanical anchorage of CFRP sheets and plates used to externally strengthen reinforced concrete beams under flexure. The pin-and-fan shape CFRP anchor, which is custom-made from typical rolled fiber sheets and bundles of loose fiber is used. Several reinforced concrete beams were casted and tested in standard four-point bending scheme to study the effectiveness of this anchorage system. The beams were externally strengthened in flexure with bonded CFRP sheets and plates and then fastened to the soffit of the beams' using various patterns of CFRP anchors. It is observed that the CFRP plates begins to separate from the beams as soon as de-bonding occurs in specimens without CFRP anchors, while in beams with CFRP anchors de-bonding was delayed leading to increase in the load carrying capacity over the un-anchored strengthened beams.

  7. Mechanical anchorage of FRP tendons – A literature review

    DEFF Research Database (Denmark)

    Schmidt, Jacob W.; Bennitz, Anders; Täljsten, Björn

    2012-01-01

    High tensile strength, good resistance to degradation and creep, low weight and, to some extent, the ability to change the modulus of elasticity are some of the advantages of using prestressed, unidirectional FRP (Fibre Reinforced Polymer) tendon systems. Bonded and non-bonded versions of these s......High tensile strength, good resistance to degradation and creep, low weight and, to some extent, the ability to change the modulus of elasticity are some of the advantages of using prestressed, unidirectional FRP (Fibre Reinforced Polymer) tendon systems. Bonded and non-bonded versions...... with such systems. This is especially important in external post-tensioned tendon systems, where the anchorage points are exposed to the full load throughout the life span of the structure. Consequently, there are large requirements related to the long-term capacity and fatigue resistance of such systems. Several...... anchorage systems for use with Aramid, Glass and Carbon FRP tendons have been proposed over the last two decades. Each system is usually tailored to a particular type of tendon. This paper presents a brief overview of bonded anchorage applications while the primary literature review discusses three methods...

  8. Analyzing of Nonuniform Hardness for Anchorage Clamp Plate after Heat Treatment

    Science.gov (United States)

    Liu, Zhenmin; Wang, Lijun; Ruan, Shipeng; Wang, Ningtao

    2017-09-01

    20CrMnTi wire rod can be used to manufacture the anchorage clamp plate. In the normal production, the test results show that the hardness of anchorage clamp plate is nonuniform. In this paper, the chemical composition, microstructure, grain size of clamp plate billet and the microstructure, hardness of the finished clamp plate product were studied and analyzed. The results show that improper heat treatment technics causes nonuniform hardness for anchorage clamp plate.

  9. Transcending Organization in Temporary Systems

    DEFF Research Database (Denmark)

    Stjerne, Iben Sandal

    Because of their temporary nature, work and employment in project based organizations are different from what we used to see in traditional organizational forms. Temporary employment, entailing less stability within the organization changes how employment and work are organized. Temporary systems...... are organized by transcending organization that go beyond the individual firm and replaces what used to be organized inside the firm. Following several calls for further research on these topics, this dissertation is a small step along the way as it investigates how work and employment are organized...... in temporary systems that lack stability and formal order. It advances our understanding of transcending organization in creative industries by adopting a practice based perspective. Empirically, the dissertation presents an in-depth study of the Danish film industry, which is an extreme case of a project...

  10. 42 CFR 488.415 - Temporary management.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Temporary management. 488.415 Section 488.415... Compliance for Long-Term Care Facilities with Deficiencies § 488.415 Temporary management. (a) Definition. Temporary management means the temporary appointment by CMS or the State of a substitute facility manager or...

  11. Comparative photoelastic study of dental and skeletal anchorages in the canine retraction

    Directory of Open Access Journals (Sweden)

    Cristiane Aparecida de Assis Claro

    2014-01-01

    Full Text Available OBJECTIVE: To compare dental and skeletal anchorages in mandibular canine retraction by means of a stress distribution analysis. METHODS: A photoelastic model was produced from second molar to canine, without the first premolar, and mandibular canine retraction was simulated by a rubber band tied to two types of anchorage: dental anchorage, in the first molar attached to adjacent teeth, and skeletal anchorage with a hook simulating the mini-implant. The forces were applied 10 times and observed in a circular polariscope. The stresses located in the mandibular canine were recorded in 7 regions. The Mann-Whitney test was employed to compare the stress in each region and between both anchorage systems. The stresses in the mandibular canine periradicular regions were compared by the Kruskal-Wallis test. RESULTS: Stresses were similar in the cervical region and the middle third. In the apical third, the stresses associated with skeletal anchorage were higher than the stresses associated with dental anchorage. The results of the Kruskal-Wallis test showed that the highest stresses were identified in the cervical-distal, apical-distal, and apex regions with the use of dental anchorage, and in the apical-distal, apical-mesial, cervical-distal, and apex regions with the use of skeletal anchorage. CONCLUSIONS: The use of skeletal anchorage in canine retraction caused greater stress in the apical third than the use of dental anchorage, which indicates an intrusive component resulting from the direction of the force due to the position of the mini-implant and the bracket hook of the canine.

  12. Comparative photoelastic study of dental and skeletal anchorages in the canine retraction

    Science.gov (United States)

    Claro, Cristiane Aparecida de Assis; Chagas, Rosana Villela; Neves, Ana Christina Elias Claro; da Silva-Concílio, Laís Regiane

    2014-01-01

    Objective To compare dental and skeletal anchorages in mandibular canine retraction by means of a stress distribution analysis. Methods A photoelastic model was produced from second molar to canine, without the first premolar, and mandibular canine retraction was simulated by a rubber band tied to two types of anchorage: dental anchorage, in the first molar attached to adjacent teeth, and skeletal anchorage with a hook simulating the mini-implant. The forces were applied 10 times and observed in a circular polariscope. The stresses located in the mandibular canine were recorded in 7 regions. The Mann-Whitney test was employed to compare the stress in each region and between both anchorage systems. The stresses in the mandibular canine periradicular regions were compared by the Kruskal-Wallis test. Results Stresses were similar in the cervical region and the middle third. In the apical third, the stresses associated with skeletal anchorage were higher than the stresses associated with dental anchorage. The results of the Kruskal-Wallis test showed that the highest stresses were identified in the cervical-distal, apical-distal, and apex regions with the use of dental anchorage, and in the apical-distal, apical-mesial, cervical-distal, and apex regions with the use of skeletal anchorage. Conclusions The use of skeletal anchorage in canine retraction caused greater stress in the apical third than the use of dental anchorage, which indicates an intrusive component resulting from the direction of the force due to the position of the mini-implant and the bracket hook of the canine. PMID:24713566

  13. Finite element simulation and testing of ISW CFRP anchorage

    DEFF Research Database (Denmark)

    Schmidt, Jacob Wittrup; Goltermann, Per; Hertz, Kristian Dahl

    2013-01-01

    is modelled in the 3D finite Element program ABAQUS, just as digital image correlation (DIC) testing was performed to verify the finite element simulation. Also a new optimized design was produced to ensure that the finite element simulation and anchorage behaviour correlated well. It is seen......Several Carbon Fibre Reinforced Polymers (CFRP) systems have been used successfully for strengthening of structures during the last decades. However, the fracture often occurs in the concrete adherent or in the adhesive interface when used for steel strengthening. As a consequence the CFRP...

  14. Anchorage Failure of RC beams strengthened with FRP at the bottom face

    DEFF Research Database (Denmark)

    Täljsten, Björn; Arifovic, Fedja

    2009-01-01

    When RC beams are strengthened by FRP plates bonded to the bottom face of the beam they fail due to the lack of the mechanical anchorage of the plate. This paper shows that it is possible to relate the anchorage failure of tension face FRP-plated beams to the crack sliding capacity of the beams...

  15. 33 CFR 109.07 - Anchorages under Ports and Waterways Safety Act.

    Science.gov (United States)

    2010-07-01

    ... Waterways Safety Act. 109.07 Section 109.07 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY ANCHORAGES GENERAL § 109.07 Anchorages under Ports and Waterways Safety Act. The provisions of section 4 (a) and (b) of the Ports and Waterways Safety Act as delegated to the Commandant of...

  16. Flexural Strengthening of RC Slabs with Prestressed CFRP Strips Using Different Anchorage Systems

    Directory of Open Access Journals (Sweden)

    José Sena-Cruz

    2015-10-01

    Full Text Available Externally Bonded Reinforcement (EBR technique has been widely used for flexural strengthening of concrete structures by using carbon fiber-reinforced polymers (CFRP. EBR technique offers several structural advantages when the CFRP material is prestressed. This paper presents an experimental and numerical study on reinforced (RC slabs strengthened in flexure with prestressed CFRP strips as a structural strengthening system. The strips are applied as an externally bonded reinforcement (EBR and anchored with either a mechanical or a gradient anchorage. The former foresees metallic anchorage plates fixed to the concrete substrate, while the latter is based on an accelerated epoxy resin curing followed by a segment-wise prestress force decrease at the strip ends. Both anchorage systems, in combination with different CFRP strip geometries, were subjected to static loading tests. It could be demonstrated that the composite strip’s performance is better exploited when prestressing is used, with slightly higher overall load carrying capacities for mechanical anchorages than for the gradient anchorage. The performed investigations by means of a cross-section analysis supported the experimental observation that in case a mechanical anchorage is used, progressive strip debonding changes the fully bonded configuration to an unbonded end-anchored system. The inclusion of defined debonding criteria for both the anchorage zones and free length between the anchorage regions allowed to precisely capture the ultimate loading forces.

  17. 33 CFR 110.189a - Key West Harbor, Key West, Fla., naval explosives anchorage area.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Key West Harbor, Key West, Fla..., Key West, Fla., naval explosives anchorage area. (a) The anchorage ground. A circular area with its... this section shall be enforced by the Commander, U.S. Naval Base, Key West, Fla., and any other...

  18. 76 FR 15246 - Anchorage Regulations; Narragansett Bay and Rhode Island Sound, RI

    Science.gov (United States)

    2011-03-21

    ... Sound, RI AGENCY: Coast Guard, DHS. ACTION: Notice of proposed rulemaking. SUMMARY: The Coast Guard... an offshore anchorage in Rhode Island Sound south of Brenton Point, Rhode Island, for use by vessels... Sound that under current informal practice is routinely used by mariners as an anchorage while waiting...

  19. Intrusão dentária utilizando mini-implantes Orthodontic intrusion with mini-implant anchorage

    Directory of Open Access Journals (Sweden)

    Telma Martins de Araújo

    2008-10-01

    Full Text Available INTRODUÇÃO: dentre os diversos tipos de movimentos dentários induzidos ortodonticamente, o de intrusão é, sem dúvida, um dos mais difíceis de serem conseguidos. A mecânica intrusiva convencional, apesar de viável, é complexa, no que diz respeito ao controle de seus efeitos colaterais. Isso, em grande parte, refere-se à dificuldade em se obter uma ancoragem satisfatória. Neste contexto, os mini-implantes, por oferecerem efetiva ancoragem esquelética, têm se mostrado de extrema valia para os ortodontistas, tornando a intrusão, tanto de dentes anteriores quanto posteriores, um procedimento cada vez mais simples, do ponto de vista mecânico. OBJETIVO: pretende-se, então, neste artigo, descrever e demonstrar, clinicamente, as diversas possibilidades de utilização dos mini-implantes como recurso de ancoragem para o movimento de intrusão.INTRODUCTION: Among all different varieties of orthodontically induced tooth movement, intrusion is, without doubt, one of the most difficult movements to be reached. Conventional intrusive biomechanics, although possible, may lead to undesirable side-effects. These events, in most cases, are related to the difficulty in obtaining an efficient anchorage unit. Then, mini-implants, because of their high success rates of effective skeletal anchorage, are valuable devices to orthodontists, transforming the intrusion movement, both at the anterior and the posterior regions, a more and more uncomplicated biomechanical procedure. AIM: to describe and show, clinically, different ways of using mini-implants as an anchorage system to intrusion movement.

  20. Treatment of Class II malocclusion with mandibular skeletal anchorage.

    Science.gov (United States)

    Cakir, Ezgi; Malkoç, Siddik; Kirtay, Mustafa

    2017-06-01

    The aim of this case report was to present the dentofacial changes obtained with bone anchorage in a Class II patient with moderate to severe crowding. A boy, aged 14.5 years, with a dolichofacial type, convex profile, and skeletal and dental Class II relationships was examined. After evaluation, functional treatment with bone anchorage and 4 first premolar extractions was decided as the treatment approach. Miniplates were placed on the buccal shelves of the mandibular third molars. The hook of the anchor was revealed from the first molar level. After surgery, the 4 first premolars were extracted to retract the protrusive mandibular incisors. The maxillary and mandibular first molars were banded, and a lip bumper was inserted to apply elastics and to help distalize the maxillary first molars. Orthodontic forces of 300 to 500 g were applied immediately after placement, originating from the miniscrews to the hooks of the appliance to advance the mandible. After 20 months of treatment, the patient had a dental and skeletal Class I relationship, the mandible was advanced, the maxilla was restrained, and overjet was decreased. The combination of a bone anchor, Class II elastics, and an inner bow is a promising alternative to functional treatment, along with extractions, in Class II patients. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  1. Comparison of Movement of the Upper Dentition According to Anchorage Method: Orthodontic Mini-Implant versus Conventional Anchorage Reinforcement in Class I Malocclusion

    OpenAIRE

    Lee, Ah-Young; Kim, Young Ho

    2010-01-01

    Objective. To compare the amounts of anchorage loss in the upper first molar (U6) and of retraction of the upper central incisor (U1) in cases with Class I malocclusion between orthodontic mini-implants (OMIs) and conventional anchorage reinforcements (CARs). Methods. The subjects were 40 female adult patients with Class I malocclusion who were treated with extraction of the first premolars and sliding mechanics. The subjects were divided into Groups 1 (N = 20, CAR) and 2 (N = 20, OMI) accord...

  2. Comparison of Movement of the Upper Dentition According to Anchorage Method: Orthodontic Mini-Implant versus Conventional Anchorage Reinforcement in Class I Malocclusion.

    Science.gov (United States)

    Lee, Ah-Young; Kim, Young Ho

    2011-01-01

    Objective. To compare the amounts of anchorage loss in the upper first molar (U6) and of retraction of the upper central incisor (U1) in cases with Class I malocclusion between orthodontic mini-implants (OMIs) and conventional anchorage reinforcements (CARs). Methods. The subjects were 40 female adult patients with Class I malocclusion who were treated with extraction of the first premolars and sliding mechanics. The subjects were divided into Groups 1 (N = 20, CAR) and 2 (N = 20, OMI) according to anchorage method. Lateral cephalograms were taken before (T0) and after treatment (T1). Seven skeletal and dental variables and ten anchorage variables were measured. Mann-Whitney test was used for statistical analysis. Results. Group 2 showed significantly larger retraction of U1 (U1E-sag, 9.5 mm : 7.1 mm, P anchorage loss of U6 (U6M-sag, 0.2 mm : 2.2 mm, P anchorage of U6, greater retraction of U1, intrusion of U1 and U6 than CAR.

  3. Evaluating the effects of consolidation on intrusion and retraction using temporary anchorage devices—a FEM study

    Directory of Open Access Journals (Sweden)

    Monica Namburi

    2017-01-01

    Full Text Available Abstract Background Extraction of premolars and retracting the anterior teeth using mini-implants and anterior retraction hooks became advent now a day. In such treatments, consolidation of arches is not done in regular practice. So, the present study is concentrated on effects of consolidation in two implant and three implant combinations of retraction and intrusion. Methods A three-dimensional FEM model of maxillary teeth and periodontal ligament housed in the alveolar bone with the first premolars extracted is generated with appropriate number of elements and nodes. The models were broadly divided into two groups according to the no. of implants. Mini-implants were placed bilaterally between the second premolar and molar at varying heights (7, 10, 13 mm in group I, and along with bilateral implants, an additional mid-implant is placed between the central incisors as group II. Brackets with 0.022 slot were placed on the teeth, 19 × 25 SS wire is placed in the brackets, an anterior retraction hook was placed at 9 mm height, and analysis was done to evaluate the stresses and displacement patterns in consolidation and non-consolidation models. Results The results showed that consolidation of the anterior teeth during intrusion and retraction shows various advantages such as less stresses on the bone, PDL, implant, teeth, and no labial flaring of the anterior teeth and three implant system, i.e., two bilateral implant at 10 mm and a mid-implant at 12 mm between the centrals has shown to be better than other models as bodily movement is observed. Conclusion Consolidation is better than non consolidation during enmasse retraction and intrusion.

  4. Temporary tattoo for wireless human pulse measurement

    Science.gov (United States)

    Pepłowski, Andrzej; Janczak, Daniel; Krzemińska, Patrycja; Jakubowska, Małgorzata

    2016-09-01

    Screen-printed sensor for measuring human pulse was designed and first tests using a demonstrator device were conducted. Various materials and sensors' set ups were compared and the results are presented as the starting point for fabrication of fully functional device. As a screen printing substrate, commercially available temporary tattoo paper was used. Using previously developed nanomaterials-based pastes design of a pressure sensor was printed on the paper and attached to the epidermis. Measurements were aimed at determining sensors impedance constant component and its variability due to pressure wave caused by the human pulse. The constant component was ranging from 2kΩ to 6kΩ and the variations of the impedance were ranging from +/-200Ω to +/-2.5kΩ, depending on the materials used and the sensor's configuration. Calculated signal-to-noise ratio was 3.56:1 for the configuration yielding the highest signal level. As the device's net impedance influences the effectiveness of the wireless communication, the results presented allow for proper design of the sensor for future health-monitoring devices.

  5. Mini-placa como ancoragem ortodôntica: relato de caso Mini screw as orthodontic anchorage: case report

    Directory of Open Access Journals (Sweden)

    André Luiz Zétola

    2005-08-01

    ígida pode ser utilizada com bastante propriedade no tratamento ortodôntico qunado for requerida uma ancoragem máxima.It is needless to say that anchorage control is necessary to a successful orthodontic treatment. Without it, it would be impossible to obtain an ideal occlusion through orthodontic mechanics in the majority of cases. The utilization of rigid devices, originated from face traumatology and implant dentistry principles, to obtain rigid anchorage in orthodontics revolutionized the way of treating cases with an unsatisfactory prognosis. Specially in cases where a lot of anchorage is needed and it is difficult or impossible to get it. The objective of this article was to revise the literature related to the use of mini-screw implant systems, to report a case where it was utilized and to discuss some aspects related to the usage of rigid anchorage orthodontics. The rigid anchorage was used in a 39 year old female patient, who had the upper left molars with a relevant extrusion due to the absence of the lower left molars. Fixed appliances were placed on the upper arch with a TPA connecting the second bicuspids. The TPA was used to anchor the intrusion of the upper left molars. A quad-helix appliance was used to correct the upper right third molar crossbite. Since the orthodontic intrusion with only dental anchorage did not have a satisfactory result, an "L" shaped titanium plate was placed on the maxilla, at the apical region of the upper first and second left molars, with the purpose of obtaining a rigid orthodontic anchorage to intrude them. Elastics were used during five months with intrusive force,the obtained intrusion was 6 millimeters. After the removal of the appliance, upper and lower dental bleaching was made and final prosthesis were placed over the implants. Through the literature reviewed and the case reported, it can be concluded that rigid anchorage can be indicated in orthodontic treatments where there is lack of anchorage or the need of an absolute

  6. Temporary Clusters and Knowledge Creation

    DEFF Research Database (Denmark)

    Maskell, Peter; Bathelt, Harald; Malmberg, Anders

    2004-01-01

    to distant markets and technologies. Third, it compares such temporaryclusters with permanent territorial hubs within their respective sector or industry. If regularparticipation in temporary clusters could satisfy a firm's need to learn through interactionwith suppliers, customers, peers and rivals, why...... or participating in such events are means toidentify the current market frontier, take stock of relative competitive positions and formfuture plans. These events exhibit many of the characteristics ascribed to permanentclusters, albeit in a temporary, periodic and intensified form. The temporary clusters...... is the phenomenon of permanent clusteringso pervasive?The answer, it is claimed, lies in the restrictions imposed on economic activity whenknowledge and ideas are transformed into valuable products and services. The paper shedsnew light on how interaction among firms in current clusters coincides...

  7. Comparison of anchorage capacity between implant and headgear during anterior segment retraction.

    Science.gov (United States)

    Li, F; Hu, H K; Chen, J W; Liu, Z P; Li, G F; He, S S; Zou, S J; Ye, Q S

    2011-09-01

    To compare the anchorage effects of the implants and the headgear for patients with anterior teeth retraction in terms of incisor retraction, anchorage loss, inclination of maxillary incisors, positional change of maxillary basal bone, and treatment duration. An electronic search for relative randomized controlled trials (RCTs) prospective and retrospective controlled trials was done through the Cochrane Central Register of Controlled Trials (CENTRAL), PubMed, Embase, Medline, and CNKI, regardless of language of study. Study selection, methodological quality assessment, and data extraction were performed by two reviewers independently. Meta-analysis was performed when possible; otherwise descriptive assessment was done. The search yielded 35 articles, of which eight met the inclusion criteria and were categorized into five groups according to types of intervention. For the midpalatal implant, the anchorage loss was much less than for the headgear group, with insignificant differences in terms of anterior teeth retraction, maxillary incisor inclination, positional change of basal bone, and treatment duration. For the mini-implant, greater anterior teeth retraction and less anchorage loss were demonstrated, with inconsistent results for the other measures. For the onplant, less anchorage loss was noted, with insignificant differences for the other measures. The skeletal anchorage of the midpalatal implant, mini-implant, and onplant offer better alternatives to headgear, with less anchorage loss and more anterior teeth retraction. There were inconsistent results from the included studies in terms of maxillary incisor inclination, positional change of maxillary basal bone, and treatment duration. More qualified RCTs are required to provide clear recommendations.

  8. Objects as Temporary Autonomous Zones

    Directory of Open Access Journals (Sweden)

    Tim Morton

    2011-09-01

    Full Text Available From Hakim Bey's instructions on creating temporary autonomous zones we see an oscillation "between performance art and politics, circus clowning and revolution." In this essay Tim Morton discusses anarchist politics as, "the creation of fresh objects in a reality without a top or a bottom object, or for that matter a middle object."

  9. Nursing Intervention During Temporary Care

    Science.gov (United States)

    Curry, Judith B.

    1974-01-01

    The role of the professional nurse in asseviating or minimizing the separation anxiety and traumatic impact on families during temporary placement of a retarded child in a residential facility is seen in two case studies of girls 3 and 12 years of age. (Author/MC)

  10. Temporary risk identification in urolithiasis.

    Science.gov (United States)

    Marickar, Y M Fazil; Salim, Abiya

    2009-12-01

    We have been using a risk index calculation for urolithiasis, which included most of the identifiable factors promoting calculogenesis. However, it was observed that the frequency of a patient getting stone problem was not uniform in spite of similarity of the risk index in the permanent setting. Also, many of the risk indices could be changed by dietary or lifestyle modifications. The objective of this paper was to calculate the temporary risk index of a patient at the time of each visit and correlate with stone activity during such periods, so that appropriate advice could be given on drugs, diet and lifestyle changes. The temporary risk index score was based on four symptoms, namely pain (0, nil; 1, vague pain; 2, mild; 3, moderate; 4, severe; 5, excruciating), haematuria (0, nil; 1, turbid; 2, cloudy; 3, reddish; 4, occasional frank blood; 5, continuous frank blood), burning sensation (0, nil; 1, minimal; 2, moderate; 3, terminal severe; 4, occasional excruciating; 5, continuous excruciating), and dysuria (0, nil; 1, minimal; 2, moderate; 3, terminal severe; 4, occasional excruciating, 5, continuous excruciating), ultrasonography for back pressure (0, nil; 1, mild; 2, moderate; 3, severe kidney and ureter; 4, unilateral total; 5, bilateral total anuria) and eight urine deposit findings (0, nil; 1, +; 2, 2+; 3, 3+; 4, 4+; 5, plenty), red blood cells, pus cells, whewellite crystals, weddellite crystals, phosphate crystals, uric acid/ammonium urate crystals, crystal clumping and crystal aggregation making a total of 13 parameters. Each parameter was given values ranging from 0 to 5. The total score was calculated and chemotherapeutic regimes were decided base on the score, which varied from 0 to 65. Hundred randomly selected patients who had been visiting the stone clinic for a minimum of five occasions were included in the study. The total scores of temporary risk were correlated with the permanent clinical risk score mentioned earlier. The temporary risk of the

  11. Urban contaminants project: Data for sediment, fish and eggs collected from Chester Creek, Anchorage, Alaska 1991

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Urbanization has degraded the water quality and adversely impacted biological communities in the lakes and streams of Anchorage. Pollution from point and nonpoint...

  12. Treatment of a skeletal Class II malocclusion using fixed functional appliance with miniplate anchorage

    National Research Council Canada - National Science Library

    Celikoglu, Mevlut; Unal, Tuba; Bayram, Mehmet; Candirli, Celal

    2014-01-01

    ...) has not yet been reported. Therefore, the aim of the present case report was to present the treatment of a patient with skeletal Class II malocclusion with mandibular retrusion using Forsus FRD with miniplate anchorage...

  13. Liver Cell Culture Devices

    NARCIS (Netherlands)

    Andria, B.; Bracco, A.; Cirino, G.; Chamuleau, R. A. F. M.

    2010-01-01

    In the last 15 years many different liver cell culture devices, consisting of functional liver cells and artificial materials, have been developed. They have been devised for numerous different applications, such as temporary organ replacement (a bridge to liver transplantation or native liver

  14. Midpalatal implants vs headgear for orthodontic anchorage - a randomized clinical trial: Cephalometric results\\ud

    OpenAIRE

    Benson, P.E.; Tinsley, D.; O'Dwyer, J.J; Majumdar, A.; Doyle, P.; Sandler, P.J.

    2007-01-01

    OBJECTIVE: To compare the clinical effectiveness of the mid-palatal implant as a method of reinforcing anchorage during orthodontic treatment with that of conventional extra-oral anchorage.\\ud \\ud DESIGN: A prospective, randomized, clinical trial\\ud Setting: Chesterfield and North Derbyshire Royal Hospital NHS Trust and the Charles Clifford Dental Hospital, Sheffield.\\ud \\ud SUBJECTS AND METHODS: 51 orthodontic patients between the ages of 12 and 39, with a class II division 1 malocclusion an...

  15. Temporary Residences: a becoming project

    Directory of Open Access Journals (Sweden)

    Luisa Ingaramo

    2012-04-01

    Full Text Available Among the experimental actions fostered so far by the Compagnia di San Paolo through its Housing Program, committed in handling the complex and fragmented housing discomfort issue, the Temporary Dwellings initiative represents a unique and innovative experience, as it actually offers the chance to activate a proper managerial direction around and about the real estate development processes. In particular, the Temporary Dwellings action is marked by two key aspects: a structured co-planning vision and projects selected through a requests for proposal system. The process in the whole aims on the one hand at reaching an high transparent level of decision making , while, on the other hand, at developing a continuous and mutual monitoring and matching activity between the Housing Program and the group of cross-curricular experts teamed up in the project: technicians, designers, managers, psychologists, contractors, and the other local stakeholders.

  16. Large capacity temporary visual memory

    Science.gov (United States)

    Endress, Ansgar D.; Potter, Mary C.

    2014-01-01

    Visual working memory (WM) capacity is thought to be limited to three or four items. However, many cognitive activities seem to require larger temporary memory stores. Here, we provide evidence for a temporary memory store with much larger capacity than past WM capacity estimates. Further, based on previous WM research, we show that a single factor — proactive interference — is sufficient to bring capacity estimates down to the range of previous WM capacity estimates. Participants saw a rapid serial visual presentation (RSVP) of 5 to 21 pictures of familiar objects or words presented at rates of 4/s or 8/s, respectively, and thus too fast for strategies such as rehearsal. Recognition memory was tested with a single probe item. When new items were used on all trials, no fixed memory capacities were observed, with estimates of up to 9.1 retained pictures for 21-item lists, and up to 30.0 retained pictures for 100-item lists, and no clear upper bound to how many items could be retained. Further, memory items were not stored in a temporally stable form of memory, but decayed almost completely after a few minutes. In contrast, when, as in most WM experiments, a small set of items was reused across all trials, thus creating proactive interference among items, capacity remained in the range reported in previous WM experiments. These results show that humans have a large-capacity temporary memory store in the absence of proactive interference, and raise the question of whether temporary memory in everyday cognitive processing is severely limited as in WM experiments, or has the much larger capacity found in the present experiments. PMID:23937181

  17. Various anchorage approaches in unilateral mandibular molar distalization using a fixed lingual arch appliance.

    Science.gov (United States)

    Kinzinger, Gero; Fritz, Ulrike; Diedrich, Peter

    2004-03-01

    Mean unilateral mandibular molar distalization of 3.33 +/- 1.28 mm was achieved in 20 patients (average age: 13 years, 1 month) by fitting an asymmetrically activated lingual arch appliance for an average treatment period of 4 months. Three different anchorage techniques were used: Anchorage was provided in seven patients by the lingual arm of the appliance alone, while another seven patients received additional sectional archwires, and another six patients sectional archwires and lip bumpers. Anchorage by means of the lingual arm alone proved to be insufficient to prevent labial tipping of the incisors. The mean protrusion and labial tipping recorded at the lower incisors was 7.67 degrees +/- 1.53 degrees and 2.64 +/- 0.48 mm respectively. The anchorage quality was enhanced and satisfactory stabilization achieved by additionally inserting a sectional archwire. In these cases the mean incisor protrusion and labial tipping was 1.75 degrees +/- 0.96 degree and 0.71 +/- 0.76 mm respectively and thus significantly lower (p lip bumper provided no further increase in anchorage quality (incisor protrusion 1.75 degrees +/- 2.87 degrees and 0.67 +/- 1.21 mm respectively). Fitting additional anchorage aids appears to have no direct impact on the extent and quality of molar distalization.

  18. Maxillary protraction at early ages. The revolution of new bone anchorage appliances.

    Science.gov (United States)

    Solano-Mendoza, B; Iglesias-Linares, A; Yañez-Vico, R M; Mendoza-Mendoza, A; Alió-Sanz, J J; Solano-Reina, E

    2012-01-01

    An update is provided on the different types of early treatment for class III malocclusions of maxillary origin. There is an increasing tendency to prescribe maxillary orthopedic treatment with skeletal anchorage, with the purpose of enhancing the skeletal and reducing the dentoalveolar effects--offering a management option for children with important deformations that otherwise would have to wait until adult age to receive surgical treatment. A literature review has been made of maxillary bone orthopedic traction appliances in growing children with class III malocclusions. A Medline (PubMed) search was made using the following MeSH terms: Cephalometric, Child, Malocclusion class III/therapy, Extraoral traction appliances, Palatal expansion, Bone plates, Skeletal anchorage, Orthodontic anchorage. Many articles show that the greatest maxillary advances are obtained at very early ages, though with a greater tendency towards relapse. However skeletal anchorage has been seen to afford a lesser relapse rate and greater dentofacial orthopedic efficiency due to its low dentoalveolar impact. In any case, further randomized clinical studies are needed to firmly establish the quantifiable differences in terms of maxillary advance, optimum traction age, optimum traction appliance and potential side effects. At present, the incorporation of surgically inserted bone anchorage appliances (miniplates and miniscrews) offers a purely orthopedic approach to treatment, with minimization of the undesirable side effects of traditional dentofacial orthopedic compensation based on dentoalveolar anchorage. Nevertheless, further studies are needed to consolidate the supporting scientific evidence in this field.

  19. Midpalatal implants vs headgear for orthodontic anchorage--a randomized clinical trial: cephalometric results.

    Science.gov (United States)

    Benson, Philip E; Tinsley, David; O'Dwyer, Jonathan J; Majumdar, Arun; Doyle, Peter; Sandler, P Jonathan

    2007-11-01

    The purpose of this study was to compare the clinical effectiveness of the midpalatal implant as a method of reinforcing anchorage during orthodontic treatment with that of conventional extraoral anchorage. This was a prospective, randomized, clinical trial at Chesterfield and North Derbyshire Royal Hospital NHS Trust and the Charles Clifford Dental Hospital, Sheffield, in the United Kingdom. Fifty-one orthodontic patients between the ages of 12 and 39, with Class II Division 1 malocclusion and absolute anchorage requirements, were randomly allocated to receive either a midpalatal implant or headgear to reinforce orthodontic anchorage. The main outcome was to compare the mesial movement of the molars and the incisors of the 2 treatment groups between the start and the end of anchorage reinforcement as measured from cephalometric radiographs. The reproducibility of the measuring technique was acceptable. There were significant differences between T1 and T2 in the implant group for the positions of the maxillary central incisor (P mandibular molar (P mandibular central incisor (P mandibular molar (P skeletal and dental points moved mesially more in the headgear group during treatment than in the implant group. These ranged from an average of 0.5 mm more mesially for the mandibular permanent molar to 1.5 mm more mesially for the maxillary molar and the mandibular base. No treatment changes between the groups were statistically significant. Midpalatal implants are an acceptable technique for reinforcing anchorage in orthodontic patients.

  20. Isolated scaphotrapeziotrapezoid osteoarthritis treatment using resurfacing arthroplasty with scaphoid anchorage.

    Science.gov (United States)

    Humada Álvarez, G; Simón Pérez, C; García Medrano, B; Faour Martín, O; Marcos Rodríguez, J J; Vega Castrillo, A; Martín Ferrero, M A

    The aim of this study is to show the results of scaphotrapeziotrapezoid (STT) joint osteoarthritis treatment performing resurfacing arthroplasty with scaphoid anchorage. An observational, descriptive and retrospective study was performed. Ten patients with isolated STT joint osteoarthritis were studied between 2013 and 2015. The mean follow-up time was 26months. Clinical results, functional and subjective scores were reviewed. The patients were satisfied, achieving an average of 2.1 (0-3) on the VAS score and 16 (2 to 28) in the DASH questionnaire, and returning to work in the first three months post-surgery. Recovery of range of motion compared to the contralateral wrist was 96% in extension, 95% in flexion, 87% in ulnar deviation and 91% in radial deviation. The average handgrip strength of the wrist was 95% and pinch strength was 95% compared to the contralateral side. There were no intraoperative complications or alterations in postoperative carpal alignment. Resurfacing arthroplasty is proposed as a good and novel alternative in treating isolated SST joint arthritis. Achieving the correct balance between the strength and mobility of the wrist, without causing carpal destabilisation, is important to obtain satisfactory clinical and functional results. Copyright © 2017. Publicado por Elsevier España, S.L.U.

  1. Maps showing seismic landslide hazards in Anchorage, Alaska

    Science.gov (United States)

    Jibson, Randall W.

    2014-01-01

    The devastating landslides that accompanied the great 1964 Alaska earthquake showed that seismically triggered landslides are one of the greatest geologic hazards in Anchorage. Maps quantifying seismic landslide hazards are therefore important for planning, zoning, and emergency-response preparation. The accompanying maps portray seismic landslide hazards for the following conditions: (1) deep, translational landslides, which occur only during great subduction-zone earthquakes that have return periods of =300-900 yr; (2) shallow landslides for a peak ground acceleration (PGA) of 0.69 g, which has a return period of 2,475 yr, or a 2 percent probability of exceedance in 50 yr; and (3) shallow landslides for a PGA of 0.43 g, which has a return period of 475 yr, or a 10 percent probability of exceedance in 50 yr. Deep, translational landslide hazards were delineated based on previous studies of such landslides, with some modifications based on field observations of locations of deep landslides. Shallow-landslide hazards were delineated using a Newmark-type displacement analysis for the two probabilistic ground motions modeled.

  2. Effectiveness of interceptive treatment of class III malocclusions with skeletal anchorage: A systematic review and meta-analysis

    National Research Council Canada - National Science Library

    Jorge Rodríguez de Guzmán-Barrera; Carla Sáez Martínez; Montserrat Boronat-Catalá; Jose María Montiel-Company; Vanessa Paredes-Gallardo; José Luís Gandía-Franco; José Manuel Almerich-Silla; Carlos Bellot-Arcís

    2017-01-01

      Recently, new strategies for treating class III malocclusions have appeared. Skeletal anchorage appears to reduce the dentoalveolar effects while maximising the orthopaedic effect in growing patients...

  3. On the Sharing of Temporary Parental Leave

    DEFF Research Database (Denmark)

    Amilon, Anna

    2007-01-01

    This paper views temporary parental leave (leave from work to take care of a sick child) as a household public good, produced with time inputs of the parents as the only input. Assuming equal productivities in the production of temporary parental leave and equal utility functions of the spouses......-point of the female is found to push the intra household allocation of temporary parental leave towards greater sharing between the spouses. In addition, an increase in the insurance ceiling will further sharing of temporary parental leave in some families, while reducing it in others....

  4. The Influence of CFRP Anchorage on Achieving Sectional Flexural Capacity of Strengthened Concrete Beams

    Directory of Open Access Journals (Sweden)

    Hayder A. Rasheed

    2015-12-01

    Full Text Available This research program is intended to verify the influence of using distributed external U-wrap CFRP anchorage to shift the failure mode from overall debonding to sectional flexural failure for concrete beams externally bonded with CFRP sheets. Premature cover delamination and FRP debonding are predominant failure modes in FRP flexural strengthening that may be delayed or prevented by using FRP anchorage. The present experimental study aims to comparatively prove that proper anchorage of flexural strengthening is anticipated to yield a classical flexural failure by FRP rupture or concrete crushing. Once the cohesion of concrete and/or the adhesion with the FRP is exhausted, the U-wraps are engaged to provide anchorage to the flexural FRP through shear friction. Accordingly, three identical T beams and three identical rectangular beams were designed and constructed to examine the capacity improvement by preventing premature debonding failure. The first specimen in each series was tested as a control beam. The second specimen in each series was strengthened using five layers of flexural CFRP in order to admit a debonding failure. The third specimen in each series was strengthened with the same five layers of flexural CFRP plus additional transverse CFRP U-wraps. This study proved that it is possible to quantify the higher flexural capacity of CFRP strengthened beams using external anchorage.

  5. 40 CFR 264.553 - Temporary Units (TU).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Temporary Units (TU). 264.553 Section... Provisions for Cleanup § 264.553 Temporary Units (TU). (a) For temporary tanks and container storage areas... Administrator may designate a unit at the facility, as a temporary unit. A temporary unit must be located within...

  6. Miniplacas de ancoragem no tratamento da mordida aberta anterior Anchorage miniplates on anterior open-bite treatment

    Directory of Open Access Journals (Sweden)

    Adilson Luiz Ramos

    2008-10-01

    Full Text Available INTRODUÇÃO: o relato de caso apresentado descreve um tratamento ortodôntico auxiliado por miniplacas, de uma paciente adulta que apresentava mordida aberta anterior acentuada, rotação horária da mandíbula, biprotrusão e ausência de selamento labial. Após a extração dos primeiros molares e retração dentária superior e inferior, associada ao controle vertical propiciado pelas placas, ocorreu uma pequena rotação anti-horária da mandíbula e a correção da mordida aberta anterior, com significativa melhora facial. OBJETIVO: o presente relato corrobora as evidências atuais quanto à eficiência do uso de miniplacas de titânio como ancoragem temporária, especialmente em situações de correções de grande amplitude, envolvendo um problema vertical.INTRODUCTION: The case report presented describes an orthodontic treatment supported by miniplates of an adult female patient who presented severe anterior openbite, clockwise rotation of the mandible, biprotrusion and the absence of labial sealing. After extraction of first molars and maxillary and mandibulary dental retraction, associated with vertical control provided by the miniplates, the anterior openbite was corrected with a little anti-clockwise rotation, resulting in a significant improve on facial appearance. AIM: This case report confirms the efficiency of titanium miniplates as temporary anchorage, especially in situations where great corrections are needed, involving a vertical problem.

  7. A new protocol of Tweed-Merrifield directional force technology with microimplant anchorage.

    Science.gov (United States)

    Chae, Jong-Moon

    2006-07-01

    Tweed-Merrifield directional force technology with microimplant anchorage is a useful treatment approach for a patient with a Class I or Class II dentoalveolar-protrusion malocclusion. It can create a favorable counterclockwise skeletal change and a balanced face without patient compliance. In contrast, headgear force with high-pull J-hook can obtain similar results but depends on patient cooperation. This case report presents the treatment of a patient with Class I canine and molar relationships, a convex profile with retrognathic mandible and marked lip protrusion, and excessive lower anterior facial height. Good facial balance was obtained by Tweed-Merrifield directional force technology with microimplant anchorage, which provided horizontal and vertical anchorage control in the maxillary and mandibular posterior teeth, and intrusion and torque control in the maxillary anterior teeth, resulting in a favorable counterclockwise mandibular response.

  8. Lessons learnt from experimental temporary octopus fishing ...

    African Journals Online (AJOL)

    This paper presents evidence of the fisheries effect of experimental temporary fishing closures for Octopus in the then-emergent Velondriake Locally Managed Marine Area (LMMA) in south-west Madagascar during 2004–2006. We present an analysis of the O. cyanea catch data for the first two years of temporary closures ...

  9. Diversity patterns of temporary wetland macroinvertebrate ...

    African Journals Online (AJOL)

    Although macroinvertebrates are potentially useful for assessing the condition of temporary wetlands, little is yet known about them. Macroinvertebrate assemblages were assessed in 138 temporary wetlands in the south-western Cape, recording 126 taxa. However, predicted richness estimates were all higher than the ...

  10. Nursing procedure in the temporary transvenous pacemaker implantation

    Directory of Open Access Journals (Sweden)

    Mª Teresa Redecillas Peiró

    2013-05-01

    Full Text Available The temporary transvenous pacemaker (MPTT implantation is a technique that consists in stimulating artificially the heart when the natural pacemaker is unable to maintain the rhythm and the appropiate frequency. This type of electric stimulation is carried out by means of an electrocateter that was implanted in the endocardium through a central vein connected to an external generator, requiring equipment and personal with specific abilities. It is commonly carried out in the intensive care units when a continuous temporary stimulation is suitable and in most cases it is carried out in situations of extreme medical urgency in critical and unstable patients. The nursing professionals play an important role in the whole procedure, becoming essential that they possess knowledge not only about technique and handling of the device but also on the performance in all its phases. This research work intends to be a practical reference that gathers those essential aspects for the development of this assistance practice including, in a detailed way, the nursing performance in the preparation, the implantation and the pursuit of the patients who a temporary transvenous pacemaker was placed in.

  11. Differences of treatment outcomes between self-ligating brackets with microimplant and headgear anchorages in adults with bimaxillary protrusion.

    Science.gov (United States)

    Chen, Mu; Li, Zheng-Ming; Liu, Xue; Cai, Bin; Wang, Da-Wei; Feng, Zhi-Cai

    2015-04-01

    Our aim was to determine differences between the outcomes of treatment using microimplant anchorage compared with headgear anchorage in adult patients with bimaxillary protrusion treated with self-ligating brackets. Thirty-one adult orthodontic patients (13 men, 18 women; age, 25.87 ± 3.37 years) who were diagnosed with bimaxillary protrusion were selected. All patients were treated with self-ligating brackets and maximum anchorage after extraction of 4 first premolars. Group 1 received microimplant anchorage, and group 2 received headgear. Lateral cephalometric radiographs were obtained before and after treatment. Differences in the skeletal and dental parameters between and within groups were analyzed. No significant difference was observed in the mean treatment times between the groups (21.93 ± 3.10 vs 23.88 ± 2.68 months). There was no significant difference in skeletal measurements before or after treatment in patients who received microimplant anchorage. Patients who received headgear anchorage had an increase of the mandibular plane angle. The microimplant anchorage group had greater anterior tooth retraction and less maxillary molar mesialization than did the headgear group. In both the anteroposterior and vertical directions, microimplant anchorage achieved better control than did the traditional headgear appliance during the treatment of bimaxillary protrusion. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  12. After the sunset: the residual effect of temporary legislation

    NARCIS (Netherlands)

    F.J. Fagan (Frank)

    2013-01-01

    textabstractThe difference between permanent legislation and temporary legislation is the default rule of termination: permanent legislation governs perpetually, while temporary legislation governs for a limited time. Recent literature on legislative timing rules considers the effect of temporary

  13. Bio-cultural anchorage of the prickly pear cactus in Tlalnepantla (Morelos), Mexico

    OpenAIRE

    Torres-Salcido, Gerardo; Ramos-Chávez, Alejandro; Urreta-Fernández, Álvaro

    2016-01-01

    The prickly pear cactus is a source of food with strong bio-cultural anchorage in Mexico. This is due to at least three factors: 1) the nature and heritage of cacti; 2) cultural heritage; and 3) the socio-cultural relationships with historical and symbolic roots that have facilitated knowledge of how to cultivate it and how to use it. The aim of this article is to put factors of territorial anchorage and its historical transformation in context by examining the case of the municipality of Tla...

  14. Treatment of skeletal 2 malocclusion using bone-plate anchorage. A case report.

    Science.gov (United States)

    Kraikosol, Kallaya; Rattanayatikul, Charunee; Godfrey, Keith; Vattraphudej, Theparith

    2007-05-01

    To report the treatment of a severe Class II division 1 malocclusion using bone-plate anchorage. A 12 year-old Thai girl presented with a skeletal 2, Class II division 1 malocclusion. Following extraction of the maxillary first premolars and mandibular second premolars, the maxillary anterior teeth were retracted and the mandibular posterior teeth moved mesially. A miniplate with screws, placed in each zygomatic buttress, was used as absolute anchorage for coil springs to retract the maxillary anterior six teeth. After treatment, the patient presented with a normal overjet and overbite, a dental Class I relationship bilaterally and an improved facial profile.

  15. On the role of temporary storage in interactive evolution

    DEFF Research Database (Denmark)

    Dahlstedt, Palle

    2009-01-01

    In typical implementations of interactive evolution of aesthetic material, population size and generation count are limited due to the time-consuming manual evaluation process. We show how a simple device can help to compensate for this, and help to enhance the functionality of interactive...... evolution. A temporary storage, defined as a number of easily accessed memory locations for evolved objects, adjacent to the evolving population, can be regarded as a non-evolving extension of the population. If sufficiently integrated into the workflow, it provides compensation for limited genetic...

  16. Spatial dynamics of the invasive defoliator amber-marked birch leafminer across the Anchorage landscape

    Science.gov (United States)

    J.E. Lundquist; R.M. Reich; M. Tuffly

    2012-01-01

    The amber-marked birch leafminer has caused severe infestations of birch species in Anchorage, AK, since 2002. Its spatial distribution has been monitored since 2006 and summarized using interpolated surfaces based on simple kriging. In this study, we developed methods of assessing and describing spatial distribution of the leafminer as they vary from year to year, and...

  17. Fatigue of cable anchorage of large cable stayed bridge; Daikibo shachokyo cable teichaku kozo no hiro

    Energy Technology Data Exchange (ETDEWEB)

    Endo, T.; Matsumoto, T. [Honshu-Shikoku Bridge Authority, Tokyo (Japan); Tsukahara, H. [Yokogawa Bridge Corp., Tokyo (Japan); Miki, C. [Tokyo Institute of Technology, Tokyo (Japan)

    1995-10-21

    Design considerations such as design schemes, the assemblage and welding of steel plates, and safety for fatigue of welded connections have to be taken for the cable anchorages of the steel cable stayed bridges. In this study, two full scale models, which have different shape of box anchorages welded to the web of the main girder, were made to investigate fatigue characteristics as well as assemblage of plate and gelding details. Finite element analyses for both test models and actual bridges here carried out to compare stress distribution. It was confirmed that the assemblage and welding of both types of box anchorage were attainable kith required quality and accuracy. According to the fatigue test, fatigue cracks originated from the weldings of the bearing plate to which the load from cable socket applied directly were caused by out-of-plane bending of the bearing plate. It was proved that the slight modifications of the details around the bearing plate resulted in sufficient fatigue strength in both types of anchorage. 1 ref., 23 figs., 2 tabs.

  18. Oxidative stress modulates DNA methylation during melanocyte anchorage blockade associated with malignant transformation.

    Science.gov (United States)

    Campos, Ana C E; Molognoni, Fernanda; Melo, Fabiana H M; Galdieri, Luciano C; Carneiro, Célia R W; D'Almeida, Vânia; Correa, Mariangela; Jasiulionis, Miriam G

    2007-12-01

    Both oxidative/nitrosative stress and alterations in DNA methylation are observed during carcinogenesis of different tumor types, but no clear correlation between these events has been demonstrated until now. Melanoma cell lines were previously established after submitting the nontumorigenicmelanocyte lineage, melan-a, to cycles of anchorage blockade. In this work, increased intracellular oxidative species and nitric oxide levels, as well as alterations in the DNA methylation, were observed after melan-a detachment, which were also associated with a decrease in intracellular homocysteine (Hcy), an element in the methionine (universal methyl donor) cycle. This alteration was accompanied by increase in glutathione (GSH) levels and methylated DNA content. Furthermore, a significant increase in dnmt1 and 3b expression was identified along melan-a anchorage blockade. L(G)-Nitro-L-arginine methyl esther (L-NAME), known as a nitric oxide synthase (NOS) inhibitor, and N-acetyl-L-cysteine (NAC) prevented the increase in global DNA methylation, as well as the increase in dnmt1 and 3b expression, observed during melan-a detachment. Interestingly, both L-NAME and NAC did not inhibit nitric oxide (NO) production in these cells, but abrogated superoxide anion production during anchorage blockade. In conclusion, oxidative stress observed during melanocyte anchorage blockade seems to modulate DNA methylation levels and may directly contribute to the acquisition of an anoikis-resistant phenotype through an epigenetic mechanism.

  19. Oxidative Stress Modulates DNA Methylation during Melanocyte Anchorage Blockade Associated with Malignant Transformation1

    Science.gov (United States)

    Campos, Ana C E; Molognoni, Fernanda; Melo, Fabiana H M; Galdieri, Luciano C; Carneiro, Célia R W; D'Almeida, Vânia; Correa, Mariangela; Jasiulionis, Miriam G

    2007-01-01

    Both oxidative/nitrosative stress and alterations in DNA methylation are observed during carcinogenesis of different tumor types, but no clear correlation between these events has been demonstrated until now. Melanoma cell lines were previously established after submitting the nontumorigenicmelanocyte lineage, melan-a, to cycles of anchorage blockade. In this work, increased intracellular oxidative species and nitric oxide levels, as well as alterations in the DNA methylation, were observed after melan-a detachment, which were also associated with a decrease in intracellular homocysteine (Hcy), an element in the methionine (universal methyl donor) cycle. This alteration was accompanied by increase in glutathione (GSH) levels and methylated DNA content. Furthermore, a significant increase in dnmt1 and 3b expression was identified along melan-a anchorage blockade. lG-Nitro-l-arginine methyl esther (l-NAME), known as a nitric oxide synthase (NOS) inhibitor, and N-acetyl-l-cysteine (NAC) prevented the increase in global DNA methylation, as well as the increase in dnmt1 and 3b expression, observed during melan-a detachment. Interestingly, both l-NAME and NAC did not inhibit nitric oxide (NO) production in these cells, but abrogated superoxide anion production during anchorage blockade. In conclusion, oxidative stress observed during melanocyte anchorage blockade seems to modulate DNA methylation levels and may directly contribute to the acquisition of an anoikis-resistant phenotype through an epigenetic mechanism. PMID:18084618

  20. Oxidative Stress Modulates DNA Methylation during Melanocyte Anchorage Blockade Associated with Malignant Transformation

    Directory of Open Access Journals (Sweden)

    Ana C.E. Campos

    2007-12-01

    Full Text Available Both oxidative/nitrosative stress and alterations in DNA methylation are observed during carcinogenesis of different tumor types, but no clear correlation between these events has been demonstrated until now. Melanoma cell lines were previously established after submitting the nontumorigenic melanocyte lineage, melan-a, to cycles of anchorage blockade. In this work, increased intracellular oxidative species and nitric oxide levels, as well as alterations in the DNA methylation, were observed after melan-a detachment, which were also associated with a decrease in intracellular homocysteine (Hey, an element in the methionine (universal methyl donor cycle. This alteration was accompanied by increase in glutathione (GSH levels and methylated DNA content. Furthermore, a significant increase in dnmti and 3b expression was identified along melan-a anchorage blockade. LG-Nitro-L-arginine methyl esther (L-NAME, known as a nitric oxide synthase (NOS inhibitor, and N-acetyl-L-cysteine (NAC prevented the increase in global DNA methylation, as well as the increase in dnmti and 3b expression, observed during melan-a detachment. Interestingly, both L-NAME and NAC did not inhibit nitric oxide (NO production in these cells, but abrogated superoxide anion production during anchorage blockade. In conclusion, oxidative stress observed during melanocyte anchorage blockade seems to modulate DNA methylation levels and may directly contribute to the acquisition of an anoikis-resistant phenotype through an epigenetic mechanism.

  1. Skeletal anchorage in orthodontics : A review of various systems in animal and human studies

    NARCIS (Netherlands)

    Janssen, Krista I.; Raghoebar, Gerry M.; Vissink, Arjan; Sandham, John

    2008-01-01

    Purpose: The aim of the present investigation was to review and evaluate the current literature on skeletal bone anchorage in orthodontics with regard to success rates of the various systems. Materials and Methods: MEDLINE, PubMed, and Cochrane searches (period January 1966 to January 2006, English

  2. 49 CFR 571.225 - Standard No. 225; Child restraint anchorage systems.

    Science.gov (United States)

    2010-10-01

    ... child restraint anchorage system installed at a front designated seating position. (e) A vehicle with a... anchor attaching bars of the SFAD 2 are replaced by spacers that end flush with the back surface of the... touching the rear top edge of the vehicle seat back, (2) Is fitted at one end with suitable hardware for...

  3. 49 CFR 393.93 - Seats, seat belt assemblies, and seat belt assembly anchorages.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Seats, seat belt assemblies, and seat belt... § 393.93 Seats, seat belt assemblies, and seat belt assembly anchorages. (a) Buses—(1) Buses... on or after January 1, 1965, and before July 1, 1971, must be equipped with a Type 1 or Type 2 seat...

  4. 76 FR 80394 - Notice of Inventory Completion: Alaska State Office, Bureau of Land Management, Anchorage, AK

    Science.gov (United States)

    2011-12-23

    ... Inventory Completion: Alaska State Office, Bureau of Land Management, Anchorage, AK AGENCY: National Park Service, Interior. ACTION: Notice. SUMMARY: The Alaska State Office, Bureau of Land Management has... completion of an inventory of human remains in the control of the Bureau of Land Management (BLM) that are...

  5. 75 FR 23804 - Notice of Inventory Completion: Alaska State Office, Bureau of Land Management, Anchorage, AK...

    Science.gov (United States)

    2010-05-04

    ... National Park Service Notice of Inventory Completion: Alaska State Office, Bureau of Land Management... completion of an inventory of human remains and associated funerary objects in the control of the U.S. Department of the Interior, Bureau of Land Management, Alaska State Office, Anchorage, AK, and in the...

  6. Evaluating School Wellness Policy in Curbing Childhood Obesity in Anchorage, Alaska

    Science.gov (United States)

    Parsons, Wendy G.; Garcia, Gabriel M.; Hoffman, Pamela K.

    2014-01-01

    In 2006, the Anchorage School District implemented a school wellness policy to address the problem of obesity among its elementary-aged students. We assessed whether the addition of this policy is effective in protecting or preventing students from becoming overweight/obese over time. The methods involved following two cohorts of students for 5…

  7. Temporary closure of the tunnel

    CERN Multimedia

    Relations with the Host States Service

    2005-01-01

    Owing to major maintenance work, the tunnel linking the various parts of the CERN site will be closed from Monday 4 July to Sunday 24 July 2005 The Host State authorities have given authorisation for persons employed by CERN or the Institutes to travel and for goods belonging to these entities to be transported between the various parts of the site via Gate E (Charles de Gaulle) while this work is being carried out, subject to strict compliance with the Rules for the Use of the Tunnel (see http://dsu.web.cern.ch/dsu/dsum/hsr/DOCUMENTS/8200980415.pdf). Gate E will thus be open between 7.00 a.m. and 7.00 p.m. from Monday to Friday during the period concerned. The rules governing the use of Gate E to enter the Meyrin site between 7.30 a.m. and 9.00 a.m. or to leave the site between 5.00 p.m. and 6.30 p.m. (see http://dsu.web.cern.ch/dsu/dsum/hsr/DOCUMENTS/12222_041027.pdf)) will remain unaffected by this temporary authorisation. Relations with the Host States Service and TS-FM Group

  8. Device for cutting protrusions

    Science.gov (United States)

    Bzorgi, Fariborz M [Knoxville, TN

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  9. PC based temporary shielding administrative procedure (TSAP)

    Energy Technology Data Exchange (ETDEWEB)

    Olsen, D.E.; Pederson, G.E. [Sargent & Lundy, Chicago, IL (United States); Hamby, P.N. [Commonwealth Edison Co., Downers Grove, IL (United States)

    1995-03-01

    A completely new Administrative Procedure for temporary shielding was developed for use at Commonwealth Edison`s six nuclear stations. This procedure promotes the use of shielding, and addresses industry requirements for the use and control of temporary shielding. The importance of an effective procedure has increased since more temporary shielding is being used as ALARA goals become more ambitious. To help implement the administrative procedure, a personal computer software program was written to incorporate the procedural requirements. This software incorporates the useability of a Windows graphical user interface with extensive help and database features. This combination of a comprehensive administrative procedure and user friendly software promotes the effective use and management of temporary shielding while ensuring that industry requirements are met.

  10. Temporary Authorizations at Permitted Waste Management Facilities

    Science.gov (United States)

    This rule under the Code of Federal Regulations (CFR) provides EPA with the authority to grant a permittee temporary authorization, without prior public notice and comment, to conduct activities necessary to respond promptly to changing conditions.

  11. Estimation of temporary emigration in male toads.

    Science.gov (United States)

    Muths, Erin; Scherer, Rick D; Corn, Paul Stephen; Lambert, Brad A

    2006-04-01

    Male boreal toads (Bufo boreas) are thought to return to the breeding site every year but, if absent in a particular year, will be more likely to return the following year. Using Pollock's robust design we estimated temporary emigration (the probability a male toad is absent from a breeding site in a given year) at three locations in Colorado, USA: two in Rocky Mountain National Park and one in Chaffee County. We present data that suggest that not all male toads return to the breeding site every year. Our analyses indicate that temporary emigration varies by site and time (for example, from 1992 to 1998, the probability of temporary emigration ranged from 10% to 29% and from 3% to 95% at Lost Lake and Kettle Tarn, respectively). Although the results provide weak evidence that males are more likely to return after a year's hiatus, a general pattern of state-dependent temporary emigration was not supported. We also hypothesized relationships between temporary emigration and a number of weather variables. While some competitive models included weather covariates, imprecise and variable estimates of the effects of these covariates precluded fully defining their impact on temporary emigration.

  12. Comparison between Herbst appliances with or without miniscrew anchorage

    OpenAIRE

    Manni, Antonio; Pasini, Marco; Mauro, Cozzani

    2012-01-01

    Background : Herbst appliance is largely used in orthodontics for the correction of Class II. The aim of this paper was to analyze dental and skeletal effects of a splints Herbst-miniscrews combined device in comparison to a mandibular splints Herbst appliance. Materials and Methods : Fifty Class II division 1 patients (27 males and 23 females with a mean age of 11.8 ± 1.7 years) were included in the study. Lateral headfilms of 25 patients with a mandibular resin splint and a miniscrew an...

  13. Application of a New Anchorage towards the Flexural Strengthening of RC Rectangular Beams with External Steel Tendons

    Directory of Open Access Journals (Sweden)

    Sungnam Hong

    2016-04-01

    Full Text Available To strengthen concrete beams, a new anchorage was proposed, and its performance was evaluated in this study. Seven concrete beams were manufactured and flexurally loaded with displacement control up to the failure point. As important test variables, the anchorage type (new/conventional and the prestress levels in the steel rebar (0, 50, and 100 kN were selected. To investigate the strengthening effects based on these test variables, the deflection, strain, and failure mode were recorded, and then the load, ductility index, and energy ratio were analyzed. Test results showed that the newly proposed end anchorage had better strengthening effects and a greater inelastic energy than the conventional end anchorages.

  14. Customized lingual bracket system and skeletal anchorage system for open bite correction

    Directory of Open Access Journals (Sweden)

    Toru Inami

    2016-01-01

    Full Text Available We treated a female patient with open bite and high-angle Class II Division 2 malocclusion using fully customized lingual appliances, orthodontic anchor screws (OAS, and a skeletal anchorage system (SAS. By carefully controlling torque, anchorage, and vertical skeletal and dental factors, we were able to obtain proper anterior coupling. Even after the retention phase of treatment, the occlusion was maintained, indicating that we provided proper treatment according to the properly designed treatment plan. This also indicates that cases with an extremely high level of difficulty, as in the present case with high-angle retrognathic mandible and open bite, can be treated by combining the Incognito appliance (a fully customized lingual bracket appliance with a SAS and OAS.

  15. Maxillary molar intrusion with zygomatic anchorage in open bite treatment: lateral and oblique cephalometric evaluation.

    Science.gov (United States)

    Oliveira, Talles Fernando Medeiros de; Nakao, Cecília Yuriko; Gonçalves, João Roberto; Santos-Pinto, Ary

    2015-03-01

    We aimed to use lateral and oblique radiographs to evaluate dental and skeletal changes arising from maxillary molar intrusion with zygomatic anchorage in open bite patients. We conducted a pilot study including nine patients (six females and three males; mean age, 18.7 ± 5.1 years) with skeletal open bite treated with titanium miniplates for posterior dentoalveolar intrusion. Lateral and oblique (right and left, 45°) radiographs were obtained before (T1) and 6 months after intrusion (T2). A paired t test was used for statistical evaluation. The maxillary posterior teeth were intruded 2.03 ± 0.87 mm (p intrusion and anteroposterior displacement. The treatment of anterior open bite with skeletal anchorage provided intrusion of molars and counterclockwise rotation of the mandible, resulting in open bite closure.

  16. Horizontal lifelines - review of regulations and simple design method considering anchorage rigidity.

    Science.gov (United States)

    Galy, Bertrand; Lan, André

    2018-03-01

    Among the many occupational risks construction workers encounter every day falling from a height is the most dangerous. The objective of this article is to propose a simple analytical design method for horizontal lifelines (HLLs) that considers anchorage flexibility. The article presents a short review of the standards and regulations/acts/codes concerning HLLs in Canada the USA and Europe. A static analytical approach is proposed considering anchorage flexibility. The analytical results are compared with a series of 42 dynamic fall tests and a SAP2000 numerical model. The experimental results show that the analytical method is a little conservative and overestimates the line tension in most cases with a maximum of 17%. The static SAP2000 results show a maximum 2.1% difference with the analytical method. The analytical method is accurate enough to safely design HLLs and quick design abaci are provided to allow the engineer to make quick on-site verification if needed.

  17. Anchorage Zone Design for Pretensioned Precast Bulb-T Bridge Girders in Virginia

    OpenAIRE

    E.D. Crispino; Cousins, Thomas E.; Roberts-Wollmann, Carin L.

    2009-01-01

    Precast/prestressed concrete girders are commonly used in bridge construction in the United States. The application and diffusion of the prestress force in a pretensioned girder cause a vertical tension force to develop near the end of the beam. Field surveys of the beam ends of pretensioned bridge girders indicate that many of the precast bulb-T (PCBT) beams used in Virginia develop cracks within the anchorage zone region. The lengths and widths of these cracks range from acceptable to poor ...

  18. Skeletal anchorage for the correction of bimaxillary protrusion and gummy smile

    Directory of Open Access Journals (Sweden)

    P P Biswas

    2017-01-01

    Full Text Available Many methods of achieving maximum anchorage have been experimented by various clinicians through the years. Usage of mini implants has its own limitations, inconsistent results being the most common. However, anchorage using mini plates produced consistent results even though it requires a minor invasive surgical procedure. The aim was to retract and correct a gummy smile of 5 mm, diagnosed to be due to a vertical maxillary excess, with mini plates used bilaterally in the zygomatic buttress region. A modified “L” shaped surgical stainless steel mini plate was inserted and stabilized with 3 screws in the anterior region of the zygomatic buttress and sutured with the tip of the surgical plate exposed in the oral cavity for the attachment of an elastomeric chain to the arch wire. The gummy smile was fully corrected with minimal intrusion of maxillary anteriors. Cephalometrically, there was intrusion and retraction of maxillary incisors with absolutely no anchor loss. The modified surgical mini plate is an excellent tool for the successful correction of the gummy smile and also has proved to be a very efficient absolute anchorage system for en masse retraction.

  19. The Plurality of Harbors at Caesarea: The Southern Anchorage in Late Antiquity

    Science.gov (United States)

    Ratzlaff, Alexandra; Galili, Ehud; Waiman-Barak, Paula; Yasur-Landau, Assaf

    2017-08-01

    The engineering marvel of Sebastos, or Portus Augusti as it was called in Late Antiquity (284-638 CE), dominated Caesarea's harbor center along modern Israel's central coast but it was only one part of a larger maritime complex. The Southern Anchorage provides a case study as one portion of the Caesarea complex, as well as a node within the regional network of anchorages and small harbors. Ceramics recovered from here show a high percentage of locally, and provincially, produced storage jars engaged in maritime trade. The ceramic evidence points towards an intensified regional trade or cabotage rather than favouring long distance trade from large port to port. Working out of these small harbors, opportunities arose for greater flexibility in specialization of commodities and materials passing through the network of subsidiary ports, contributing to a more diversified market economy. This analysis provides another example in the growing focus on how these simple and semi-modified anchorages in the Eastern Mediterranean were often the predominant economic networks connecting hinterland and coastal trade.

  20. Requirement for PAK4 in the anchorage-independent growth of human cancer cell lines.

    Science.gov (United States)

    Callow, Marinella G; Clairvoyant, Felix; Zhu, Shirley; Schryver, Brian; Whyte, David B; Bischoff, James R; Jallal, Bahija; Smeal, Tod

    2002-01-04

    p21-activated protein kinase (PAK) serine/threonine kinases are important effectors of Rho family GTPases and have been implicated in the regulation of cell morphology and motility, as well as in cell transformation. To further investigate the possible involvement of PAK kinases in tumorigenesis, we analyzed the expression of several family members in tumor cell lines. Here we demonstrate that PAK4 is frequently overexpressed in human tumor cell lines of various tissue origins. We also have identified serine (Ser-474) as the likely autophosphorylation site in the kinase domain of PAK4 in vivo. Mutation of this serine to glutamic acid (S474E) results in constitutive activation of the kinase. Phosphospecific antibodies directed against serine 474 detect activated PAK4 on the Golgi membrane when PAK4 is co-expressed with activated Cdc42. Furthermore, expression of the active PAK4 (S474E) mutant has transforming potential, leading to anchorage-independent growth of NIH3T3 cells. A kinase-inactive PAK4 (K350A,K351A), on the other hand, efficiently blocks transformation by activated Ras and inhibits anchorage-independent growth of HCT116 colon cancer cells. Taken together, our data strongly implicate PAK4 in oncogenic transformation and suggest that PAK4 activity is required for Ras-driven, anchorage-independent growth.

  1. p73 poses a barrier to malignant transformation by limiting anchorage-independent growth

    Science.gov (United States)

    Beitzinger, Michaela; Hofmann, Lars; Oswald, Claudia; Beinoraviciute-Kellner, Rasa; Sauer, Markus; Griesmann, Heidi; Bretz, Anne Catherine; Burek, Christof; Rosenwald, Andreas; Stiewe, Thorsten

    2008-01-01

    p53 is known to prevent tumour formation by restricting the proliferation of damaged or oncogene-expressing cells. In contrast, how the p53 family member p73 suppresses tumour formation remains elusive. Using a step-wise transformation protocol for human cells, we show that, in premalignant stages, expression of the transactivation-competent p73 isoform TAp73 is triggered in response to pRB pathway alterations. TAp73 expression at this stage of transformation results in increased sensitivity to chemotherapeutic drugs and oxidative stress and inhibits proliferation and survival at high cell density. Importantly, TAp73 triggers a transcriptional programme to prevent anchorage-independent growth, which is considered a crucial hallmark of fully transformed cells. An essential suppressor of anchorage-independent growth is KCNK1, which is directly transactivated by TAp73 and commonly downregulated in glioma, melanoma and ovarian cancer. Oncogenic Ras switches p73 expression from TAp73 to the oncogenic ΔNp73 isoform in a phosphatidyl-inositol 3-kinase-dependent manner. Our results implicate TAp73 as a barrier to anchorage-independent growth and indicate that downregulation of TAp73 is a key transforming activity of oncogenic Ras mutants. PMID:18239687

  2. Intrusion of overerupted maxillary molars with miniscrew implant anchorage: a radiographic evaluation.

    Science.gov (United States)

    Xun, Chun-lei; Zhao, Hong; Zeng, Xiang-long; Wang, Xing

    2013-10-01

    The aim of this retrospective study was to quantitatively evaluate the treatment effects of intrusion of overerupted maxillary molars using miniscrew implant anchorage and to investigate the apical root resorption after molar intrusion. The subjects included 30 patients whose average ages were 35.5±9.0 years. All patients had received intrusion treatments for overerupted maxillary molars with miniscrew anchorage. There were 38 maxillary first molars and 26 maxillary second molars to be intruded. Two miniscrews were inserted in the buccal and palatal alveolar bone mesial to the overerupted molar. Force of 100-150 g was applied by the elastic chains between screw head and attachment on each side. Lateral cephalograms and panoramic radiographs taken before and after intrusion were used to evaluate dental changes and root resorption of molars. Only 6 of the 128 miniscrews failed. The first and second molars were significantly intruded by averages of 3.4 mm and 3.1 mm respectively (Pintrusion time was more than 6 months. The crown of the molars mesially tilted by averages of 3.1 degrees and 3.3 degrees (Pintrusion treatment of overerupted molars with miniscrew anchorages could be used as an efficient and reliable method to recover lost restoration space for prosthesis. Radiographically speaking, root resorption of molars was not clinically significant after application of intrusive forces of 200 to 300 g.

  3. Need for adaptation: transformation of temporary houses.

    Science.gov (United States)

    Wagemann, Elizabeth

    2017-10-01

    Building permanent accommodation after a disaster takes time for reasons including the removal of debris, the lack of available land, and the procurement of resources. In the period in-between, affected communities find shelter in different ways. Temporary houses or transitional shelters are used when families cannot return to their pre-disaster homes and no other alternative can be provided. In practice, families stay in a standard interim solution for months or even years while trying to return to their routines. Consequently, they adapt their houses to meet their midterm needs. This study analysed temporary houses in Chile and Peru to illustrate how families modify them with or without external support. The paper underlines that guidance must be given on how to alter them safely and on how to incorporate the temporary solution into the permanent structure, because families adapt their houses whether or not they are so designed. © 2017 The Author(s). Disasters © Overseas Development Institute, 2017.

  4. Closing a temporary ileostomy within two weeks.

    Science.gov (United States)

    Hindenburg, Tommy; Rosenberg, Jacob

    2010-06-01

    Temporary ileostomy is frequently constructed to relieve a rectal anastomosis and avoid peritonitis if the anastomosis is leaking. Ostomy is a burden for both the patient and society and early closure is therefore desirable to counteract increased morbidity. Several prospective studies and a single randomized controlled trial have shown that closure in less than two weeks was associated with lower or equal morbidity compared with later closure. Thus, current data support early closure of temporary ileostomy performed to cover rectal anastomosis in routine clinical practice.

  5. Nurses' perceptions of temporary nursing service agencies.

    Science.gov (United States)

    Sorrentino, E A; Simunek, L A

    1991-04-01

    Temporary staffing agencies have indeed carved out a role for themselves, and our free enterprise system lends itself to the perpetuation of the entrepreneurial spirit in all: nurses, agencies, and hospitals alike. It is wiser to learn to work with current structure realizing that supply and demand plays an important role in the survival and success of agencies. Although there are problems associated with temporary nursing staffing, they are surmountable. Orientation programs, performance monitoring, ensuring accountability of both nurse and agency are but a few that can enhance utilization and quality of service.

  6. Timing of PMMA cement application for pedicle screw augmentation affects screw anchorage.

    Science.gov (United States)

    Schmoelz, Werner; Heinrichs, Christian Heinz; Schmidt, Sven; Piñera, Angel R; Tome-Bermejo, Felix; Duart, Javier M; Bauer, Marlies; Galovich, Luis Álvarez

    2017-04-03

    Cement augmentation is an established method to increase the pedicle screw (PS) anchorage in osteoporotic vertebral bodies. The ideal timing for augmentation when a reposition maneuver is necessary is controversial. While augmentation of the PS before reposition maneuver may increase the force applied it on the vertebrae, it bears the risk to impair PS anchorage, whereas augmenting the PS after the maneuver may restore this anchorage and prevent early screw loosening. The purpose of the present study was to evaluate the effect of cement application timing on PS anchorage in the osteoporotic vertebral body. Ten lumbar vertebrae (L1-L5) were used for testing. The left and right pedicles of each vertebra were instrumented with the same PS size and used for pairwise comparison of the two timing points for augmentation. For the reposition maneuver, the left PS was loaded axially under displacement control (2 × ±2 mm, 3 × ±6 mm, 3 × ±10 mm) to simulate a reposition maneuver. Subsequently, both PS were augmented with 2 ml PMMA cement. The same force as measured during the left PS maneuver was applied to the previously augmented right hand side PS [2 × F (±2 mm), 3 × F (±6 mm), 3 × F (±10 mm)]. Both PS were cyclically loaded with initial forces of +50 and -50 N, while the lower force was increased by 5 N every 100 cycles until total failure of the PS. The PS motion was measured with a 3D motion analysis system. After cyclic loading stress, X-rays were taken to identify the PS loosening mechanism. In comparison with PS augmented prior to the reposition maneuver, PS augmented after the reposition maneuver showed a significant higher number of load cycles until failure (5930 ± 1899 vs 3830 ± 1706, p = 0.015). The predominant loosening mechanism for PS augmented after the reposition maneuver was PS toggling with the attached cement cloud within the trabecular bone. While PS augmented prior to the reposition, maneuver showed a motion of

  7. New Technique for Mandibular Symphyseal Distraction by a Double-Level Anchorage and Fixation System: Advantages and Results.

    Science.gov (United States)

    Carlino, Franco; Pantaleo, Giuseppe; Ciuffolo, Fabio; Claudio, Pier Paolo; Cortese, Antonio

    2016-09-01

    A surgical technique to widen the mandible is the mandibular midline distraction: the most common indications for mandibular midline distraction are severe mandibular anterior crowding, severe mandibular transverse deficiency, uni- or bilateral crossbite, impacted anterior teeth with inadequate space, and tipped teeth. Commonly used distraction devices can be divided into 2 systems: bone-borne distraction system appliance, dental-borne distraction systems. Each system has peculiar advantages, disadvantages, and different indications. To combine advantages of both systems we developed a new technique adopting an immediate basal bone widening with fixation after osteotomy and a dental borne rigid lingual system for distraction. The aim of this work is to show a new technique for symphysis mandibular distraction based on a double-level anchorage and fixation system on clinical patients showing final results and advantages. Two patients affected by dento-alveolar and basal bone maxillary and mandibular transversal collapse even in association with other skeletal malocclusion were selected. Patients were clinically and radiographically studied and analyzed at different times before and after surgery. Dental and basal bone measurements were performed clinically and radiographically. The results were optimal with perfect dental arches alignment followed by closing of the open bites with multiple-segmented surgery in a second surgical time. No misalignment of the 2 mandibular halves was noticed during the distraction procedure. Dental-bone discrepancies correction is mandatory before orthodontic treatment alignment. Transversal jaw expansion can be achieved safely and stably by distraction of both maxillae for the combination of osteogenesis and histogenesis with augmentation of both bone and soft tissue. Bone-borne distraction will result in more stable results; dental-borne devices will result in more simple and aesthetically rewarding procedures. Hybrid techniques

  8. 7 CFR 205.290 - Temporary variances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Temporary variances. 205.290 Section 205.290 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Organic...

  9. Temporary Tattoos and Henna/Mehndi

    Science.gov (United States)

    ... For example, we can issue Import Alerts and Warning Letters. An Import Alert allows FDA to detain products that violate or ... Awareness of Safety: FDA Webinar, May 13, 2014 Warning Letter Issued to Black Henna Ink, Inc. Import Alert #53-14: Intensified Coverage of Temporary Tattoos Containing ...

  10. Closing a temporary ileostomy within two weeks

    DEFF Research Database (Denmark)

    Hindenburg, Tommy; Rosenberg, J.

    2010-01-01

    Temporary ileostomy is frequently constructed to relieve a rectal anastomosis and avoid peritonitis if the anastomosis is leaking. Ostomy is a burden for both the patient and society and early closure is therefore desirable to counteract increased morbidity. Several prospective studies and a sing...

  11. Temporary tattoos: a novel OSCE assessment tool.

    Science.gov (United States)

    Gormley, Gerry; Menary, Allison; Layard, Brooke; Hart, Nigel; McCourt, Collette

    2013-08-01

    There are many issues regarding the use of real patients in objective structured clinical examinations (OSCEs). In dermatology OSCE stations, standardised patients (SPs) with clinical photographs are often used. Temporary transfer tattoos can potentially simulate skin lesions when applied to an SP. This study aims to appraise the use of temporary malignant melanoma tattoos within an OSCE framework. Within an 11-station OSCE, a temporary malignant melanoma tattoo was developed and applied to SPs in a 'skin lesion' OSCE station. A questionnaire captured the opinions of the candidate, SP and examiners, and the degree of perceived realism of each station was determined. Standard post hoc OSCE analysis determined the psychometric reliability of the stations. The response rates were 95.9 per cent of candidates and 100 per cent of the examiners and SPs. The 'skin lesion' station achieved the highest realism score compared with other stations: 89.0 per cent of candidates felt that the skin lesion appeared realistic; only 28 per cent of candidates had ever seen a melanoma before in training. The psychometric performance of the melanoma station was comparable with, and in many instances better than, other OSCE stations. Transfer tattoo technology facilitates a realistic dermatology OSCE station encounter. Temporary tattoos, alongside trained SPs, provide an authentic, standardised and reliable experience, allowing the assessment of integrated dermatology clinical skills. © 2013 John Wiley & Sons Ltd.

  12. Closing a temporary ileostomy within two weeks

    DEFF Research Database (Denmark)

    Hindenburg, Tommy; Rosenberg, J.

    2010-01-01

    Temporary ileostomy is frequently constructed to relieve a rectal anastomosis and avoid peritonitis if the anastomosis is leaking. Ostomy is a burden for both the patient and society and early closure is therefore desirable to counteract increased morbidity. Several prospective studies and a single...

  13. 40 CFR 180.31 - Temporary tolerances.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Temporary tolerances. 180.31 Section 180.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS... period designed to allow the orderly marketing of the raw agricultural commodities produced while testing...

  14. Temporary Chinese Migration to Madagascar: Local Perceptions ...

    African Journals Online (AJOL)

    This article fills a knowledge-gap in the literature on China in Africa by exploring local perceptions of temporary Chinese migrants in Madagascar, the growth of small-scale Chinese-owned import and retail businesses in the capital, and their impacts on Malagasy producers, utilizing the country's blanket and paper industries ...

  15. Temporary Chinese Migration to Madagascar: Local Perceptions ...

    African Journals Online (AJOL)

    However, as public debate over their impact in Madagascar intensifies, the temporary Chinese migrant ... economic and political engagement of the continent. Following the .... all focus on either the earlier waves of migration or on the relations between the resident Chinese community and the new migrants. Notable ...

  16. 47 CFR 74.537 - Temporary authorizations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Temporary authorizations. 74.537 Section 74.537 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO.... However, in the case of events of widespread interest and importance which cannot be transmitted...

  17. 47 CFR 74.633 - Temporary authorizations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Temporary authorizations. 74.633 Section 74.633 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... wide-spread interest and importance which cannot be transmitted successfully on these frequencies...

  18. 47 CFR 74.833 - Temporary authorizations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Temporary authorizations. 74.833 Section 74.833 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... interest and importance which cannot be transmitted successfully on these frequencies, frequencies assigned...

  19. 47 CFR 74.433 - Temporary authorizations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Temporary authorizations. 74.433 Section 74.433 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... of events of wide-spread interest and importance which cannot be transmitted successfully on these...

  20. Effects of monocortical and bicortical mini-implant anchorage on bone-borne palatal expansion using finite element analysis.

    Science.gov (United States)

    Lee, Robert J; Moon, Won; Hong, Christine

    2017-05-01

    Bone-borne palatal expansion relies on mini-implant stability for successful orthopedic expansion. The large magnitude of applied force experienced by mini-implants during bone-borne expansion may lead to high failure rates. Use of bicortical mini-implant anchorage rather than monocortical anchorage may improve mini-implant stability. The aims of this study were to analyze and compare the effects of bicortical and monocortical anchorages on stress distribution and displacement during bone-borne palatal expansion using finite element analysis. Two skull models were constructed to represent expansion before and after midpalatal suture opening. Three clinical situations with varying mini-implant insertion depths were studied in each skull model: monocortical, 1-mm bicortical, and 2.5-mm bicortical. Finite element analysis simulations were performed for each clinical situation in both skull models. Von Mises stress distribution and transverse displacement were evaluated for all models. Peri-implant stress was greater in the monocortical anchorage model compared with both bicortical anchorage models. In addition, transverse displacement was greater and more parallel in the coronal plane for both bicortical models compared with the monocortical model. Minimal differences were observed between the 1-mm and the 2.5-mm bicortical models for both peri-implant stress and transverse displacement. Bicortical mini-implant anchorage results in improved mini-implant stability, decreased mini-implant deformation and fracture, more parallel expansion in the coronal plane, and increased expansion during bone-borne palatal expansion. However, the depth of bicortical mini-implant anchorage was not significant. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  1. Branded prescription drug fee. Final regulations, temporary regulations, and removal of temporary regulations.

    Science.gov (United States)

    2014-07-28

    This document contains final regulations that provide guidance on the annual fee imposed on covered entities engaged in the business of manufacturing or importing branded prescription drugs. This fee was enacted by section 9008 of the Patient Protection and Affordable Care Act, as amended by section 1404 of the Health Care and Education Reconciliation Act of 2010. This document also withdraws the Branded Prescription Drug Fee temporary regulations and contains new temporary regulations regarding the definition of controlled group that apply beginning on January 1, 2015. The final regulations and the new temporary regulations affect persons engaged in the business of manufacturing or importing certain branded prescription drugs. The text of the temporary regulations in this document also serves as the text of proposed regulations set forth in a notice of proposed rulemaking (REG-123286-14) on this subject in the Proposed Rules section in this issue of the Federal Register.

  2. Temporary Employment and Perceived Employability: Mediation by Impression Management

    Science.gov (United States)

    De Cuyper, Nele; De Witte, Hans

    2010-01-01

    Perceived employability (PE) has been advanced as the upcoming resource for career development, particularly for temporary workers. The question is how temporary workers become employable. Our hypothesis is that temporary workers more than permanent workers use impression management to become employable, both on the internal and the external labor…

  3. 30 CFR 47.44 - Temporary, portable containers.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Temporary, portable containers. 47.44 Section... TRAINING HAZARD COMMUNICATION (HazCom) Container Labels and Other Forms of Warning § 47.44 Temporary, portable containers. (a) The operator does not have to label a temporary, portable container if he or she...

  4. Midpalatal miniscrews and high-pull headgear for anteroposterior and vertical anchorage control: cephalometric comparisons of treatment changes.

    Science.gov (United States)

    Lee, Jungkil; Miyazawa, Ken; Tabuchi, Masako; Kawaguchi, Misuzu; Shibata, Momoko; Goto, Shigemi

    2013-08-01

    Our aim was to evaluate which anchorage system is better suited for both anteroposterior and vertical anchorage control of maxillary posterior teeth. Fifty-one subjects requiring maximum anchorage were divided into 2 groups according to maxillary posterior anchorage reinforcement: high-pull headgear, conventional transpalatal arch, and interarch elastics (n = 28); or modified transpalatal arch supported by 2 midpalatal miniscrews (n = 23). Bilateral maxillary first premolars were extracted in all patients. Pretreatment and posttreatment lateral cephalometric radiographs were superimposed to compare skeletal and dental changes between the groups. (1) The miniscrew group had less mesial movement of the maxillary first molars (0.85 vs 3.63 mm) and greater maxillary incisor retraction (6.87 vs 4.50 mm) than did the headgear group with the same treatment duration. (2) The maxillary molars were significantly intruded in the miniscrew group (1.30 mm), whereas they were extruded in the headgear group (0.71 mm). In the miniscrew group, intrusion of the maxillary molars resulted in a statistically significant decrease in the mandibular plane angle (0.80°). Patients using high-pull headgear showed no significant decrease in these measurements. In both the anteroposterior and vertical directions, a modified transpalatal arch supported by 2 midpalatal miniscrews provided more stable anchorage. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  5. A comparison of the effects of 2 mandibular anchorage systems used with a 3-dimensional bimetric maxillary distalizing arch.

    Science.gov (United States)

    Okay, Candan; Gülsen, Ayşe; Keykubat, Alaaddin; Ucem, Tuba Tortop; Yüksel, Sema

    2006-01-01

    The purpose of this study was to compare the effects of 2 mandibular anchorage systems used with a 3-dimensional bimetric maxillary distalizing arch. The Wilson rapid molar distalization appliance for Class II molar correction was used with 26 patients; two groups of 13 patients each were formed. In the first group (9 girls, 4 boys with a mean age 11 years 5 months), mandibular anchorage was gained by a modified lip bumper with a standard lingual arch of 0.9-mm stainless steel. The second group (7 girls, 6 boys, with a mean age of 13 years) had a 0.016 x 0.016-inch utility arch, with a 3-dimensional lingual arch for anchorage. Cephalometric radiographs were taken before and after maxillary first molar distalization. The treatment results showed that the extrusion of the mandibular first molar was statistically significant in both the modified lip bumper and utility arch groups (P lip bumper and utility arch groups (P lip bumper group (P lip bumper group (P < .05). Both anchor units similarly enhanced the mandibular first molar anchorage. However, particularly in the utility group, mandibular incisor anchorage control seemed to be inadequate.

  6. Differences between sliding mechanics with implant anchorage and straight-pull headgear and intermaxillary elastics in adults with bimaxillary protrusion.

    Science.gov (United States)

    Koyama, Isao; Iino, Shoichiro; Abe, Yuka; Takano-Yamamoto, Teruko; Miyawaki, Shouichi

    2011-04-01

    The aim of this retrospective study was to determine differences between the outcomes of treatment using implant anchorage compared with straight-pull headgear and intermaxillary elastics in bimaxillary protrusion patients. The lateral cephalograms of 28 adult orthodontic patients (3 males and 25 females; age, 24.9 ± 5.0 years) who had an Angle Class I malocclusion with bimaxillary protrusion were selected. Group 1 (14 patients; 1 male and 13 females; age, 25.0 ± 5.1 years) received sliding mechanics with implant anchorage and group 2 (14 patients; 2 males and 12 females; age, 24.8 ± 5.1 years) a straight-pull headgear and intermaxillary elastics. Lateral cephalometric radiographs obtained before and after treatment were traced, 13 landmarks identified, and differences in the skeletal and dental changes compared between the groups. Wilcoxon's signed-rank test was used to determine changes within the treatment groups and a Mann-Whitney U-test to evaluate significant differences. More anchorage loss occurred at the maxillary posterior teeth in group 2 (2.1 mm) than in group 1 (0.1 mm). Closing rotation of the mandible occurred in group 1, while opening rotation of the mandible was observed in group 2. These results suggest that sliding mechanics with implant anchorage may provide absolute anchorage and could control mandibular rotation more than the conventional technique.

  7. 77 FR 71825 - Notice of Temporary Restriction of Vehicle Use and Temporary Closure to Tree Cutting and Wood...

    Science.gov (United States)

    2012-12-04

    ...: 14X1125] Notice of Temporary Restriction of Vehicle Use and Temporary Closure to Tree Cutting and Wood... harvesting and/or tree cutting on public land within the Topaz Ranch Estates (TRE) and Preacher fires burn... and a temporary closure to tree cutting and wood collecting on areas burned by the TRE and Preacher...

  8. Management of acquired open bite associated with temporomandibular joint osteoarthritis using miniscrew anchorage

    OpenAIRE

    Tanaka, Eiji; Yamano, Eizo; Inubushi, Toshihiro; Kuroda, Shingo

    2012-01-01

    This article reports the orthodontic treatment of a patient with skeletal mandibular retrusion and an anterior open bite due to temporomandibular joint osteoarthritis (TMJ-OA) using miniscrew anchorage. A 46-year-old woman had a Class II malocclusion with a retropositioned mandible. Her overjet and overbite were 7.0 mm and -1.6 mm, respectively. She had limited mouth opening, TMJ sounds, and pain. Condylar resorption was observed in both TMJs. Her TMJ pain was reduced by splint therapy, and t...

  9. Fracture resistance of various temporary crown materials.

    Science.gov (United States)

    Yilmaz, Asude; Baydaş, Seyfettin

    2007-01-01

    The aim of this study was to evaluate the fracture resistance of various provisional crown materials using an in vitro model test system. In the present study polycarbonate crowns, prefabricated by the manufacturer (3M Polycarbonate Crown), and the temporary crowns, fabricated in the dental laboratory environment, were fabricated using bis-acryl composite (Protemp II), autopolymerizing PMMA resin (BISICO Temp S), and heat-polymerized PMMA resin (Major C&B-V Dentine). All temporary crowns were stored in distilled water for 24 hours at room temperature prior to testing. The crowns were seated on metal dies, fabricated from Cr-Co alloy (AZ Dental, Konstanz, Germany), and then tested using the indenter of a Hounsfield testing machine (Hounsfield Tensometer, Hounsfield Test Equipment, Raydon, England). The tip of the indenter was located at a position one-third of the way down the inciso-palatine surface at 135 masculine. The data were statistically analyzed for differences using one-way analysis of variance (ANOVA) and the Tukey HSD test (P polycarbonate crowns were significantly different from the BISICO Temp S, Protemp II, and Major C&B-V Dentine (P polycarbonate crowns may be preferable to the other types of temporary crowns used in this study.

  10. Effects of conventional anchorage on premolar root development during treatment with a pendulum appliance.

    Science.gov (United States)

    Kinzinger, Gero; Pantel, Cora; Ludwig, Björn; Gülden, Norbert; Glasl, Bettina; Lisson, Jörg

    2010-07-01

    By metrically analyzing orthopantomograms, we aimed in this study to retrospectively investigate whether maxillary premolars used as anchoring teeth during molar distalization with pendulum appliances would reveal inhibited root development. The upper molars were distalized with a modified pendulum appliance (Pendulum K) in 36 adolescents (14 males, 22 females, mean age 12.3 years). Mean treatment period was 19.5 weeks. Orthopantomograms of each patient were taken at the start (time point T1) and after completion of molar distalization (time point T2). The enlargement of the posterior region was ascertained individually quadrant by quadrant for each radiograph, followed by measurement of the vestibular tooth lengths of the premolars whose root development was for the most part not yet complete. To assess further root development in the premolar region, the differences were calculated between tooth lengths at the start and end of treatment. During treatment with the pendulum appliance a general increase in tooth lengths in the anchorage region was observed (1.37 +/- 1.70 mm, pPendulum K. However, the Pendulum K appliance's specific biomechanics make it possible to transfer the reactive forces and moments to the anchorage unit so that they remain within the physiological range, allowing uninhibited premolar root development. This also applies after completed eruption of the second molars, when the treatment period and hence duration of exposure to the active and reactive forces and moments arising during molar distalization are comparatively increased.

  11. Prestressed CFRP Strips with Gradient Anchorage for Structural Concrete Retrofitting: Experiments and Numerical Modeling

    Directory of Open Access Journals (Sweden)

    Julien Michels

    2014-01-01

    Full Text Available This paper presents a study on the load carrying capacity of reinforced concrete (RC beams strengthened with externally bonded (EB carbon fiber reinforced polymer (CFRP strips prestressed up to 0.6% in strain. At the strip ends, the innovative gradient anchorage is used instead of conventional mechanical fasteners. This method, based on the epoxy resin’s ability to rapidly cure under high temperatures, foresees a sector-wise heating followed by a gradual decrease of the initial prestress force towards the strip ends. The experimental investigation shows a promising structural behavior, resulting in high strip tensile strains, eventually almost reaching tensile failure of the composite strip. Additionally, ductility when considering deflection at steel yielding and at ultimate load is satisfying, too. From a practical point of view, it is demonstrated that premature strip grinding in the anchorage zone is not beneficial. In addition, a non-commercial 1D finite element code has been enlarged to an EB reinforcement with prestressed composite strips. A bilinear bond stress-slip relation obtained in earlier investigations is introduced as an additional failure criterion to the code. The numerical code is able to almost perfectly predict the overall structural behavior. Furthermore, the calculations are used for comparison purposes between an initially unstressed and a prestressed externally bonded composite reinforcement. The increase in cracking and yielding load, as well as differences in structural stiffness are apparent.

  12. Antithrombotic therapy for the CardioWest temporary total artificial heart.

    Science.gov (United States)

    Ensor, Christopher R; Cahoon, William D; Crouch, Michael A; Katlaps, Gundars J; Hess, Michael L; Cooke, Richard H; Gunnerson, Kyle J; Kasirajan, Vigneshwar

    2010-01-01

    The CardioWest temporary total artificial heart serves as a viable bridge to orthotopic heart transplantation in patients who are experiencing end-stage refractory biventricular heart failure. This device is associated with a low, albeit still substantial, risk of thrombosis. Platelet interactions with artificial surfaces are complex and result in continuous activation of contact proteins despite therapeutic anticoagulation. We searched the medical literature (publication dates, January 1962-October 2009) in order to evaluate means of mitigating adverse events that have occurred after implantation of the CardioWest temporary total artificial heart.We conclude that the use of a multitargeted antithrombotic approach, involving anticoagulation (bivalirudin and warfarin) and antiplatelet therapy (dipyridamole and aspirin), can mitigate the procoagulative effects of mechanical circulatory assist devices, particularly those that are associated with the CardioWest temporary total artificial heart. Careful monitoring with use of a variant multisystem approach, involving efficacy tests (thrombelastography and light transmittance aggregometry), safety tests (laboratory analyses), and warfarin genomics, may maximize the therapeutic actions and minimize the bleeding risks that are associated with the multitargeted antithrombotic approach. The development and monitoring of individualized antithrombotic regimens require that informed health professionals appreciate the complexities and grasp the hazards that are associated with these therapies.

  13. A study on setting of the fatigue limit of temporary dental implants.

    Science.gov (United States)

    Kim, M H; Cho, E J; Lee, J W; Kim, E K; Yoo, S H; Park, C W

    2017-07-01

    A temporary dental implant is a medical device which is temporarily used to support a prosthesis such as an artificial tooth used for restoring patient's masticatory function during implant treatment. It is implanted in the oral cavity to substitute for the role of tooth. Due to the aging and westernization of current Korean society, the number of tooth extraction and implantation procedures is increasing, leading to an increase in the use and development of temporary dental implants. Because an implant performs a masticatory function in place of a tooth, a dynamic load is repeatedly put on the implant. Thus, the fatigue of implants is reported to be the most common causes of the fracture thereof. According to the investigation and analysis of the current domestic and international standards, the standard for fatigue of implant fixtures is not separately specified. Although a test method for measuring the fatigue is suggested in an ISO standard, it is a standard for permanent dental implants. Most of the test standards for Korean manufacturers and importers apply 250 N or more based on the guidance for the safety and performance evaluation of dental implants. Therefore, this study is intended to figure out the fatigue standard which can be applied to temporary dental implants when measuring the fatigue according to the test method suggested in the permanent dental implant standard. The results determined that suitable fatigue standards of temporary dental implants should be provided by each manufacturer rather than applying 250 N. This study will be useful for the establishment of the fatigue standards and fatigue test methods of the manufacturers and importers of temporary dental implants.

  14. Empirical correlation methods for temporary anions.

    Science.gov (United States)

    Sommerfeld, Thomas; Weber, Rebecca J

    2011-06-23

    A temporary anion is a short-lived radical anion that decays through electron autodetachment into a neutral molecule and a free electron. The energies of these metastable species are often predicted using empirical correlation methods because ab initio predictions are computationally very expensive. Empirical correlation methods can be justified in the framework of Weisskopf-Fano-Feshbach theory but tend to work well only within closely related families of molecules or within a restricted energy range. The reason for this behavior can be understood using an alternative theoretical justification in the framework of the Hazi-Taylor stabilization method, which suggests that the empirical parameters do not so much correct for the coupling of the computed state to the continuum but for electron correlation effects and that therefore empirical correlation methods can be improved by using more accurate electronic structure methods to compute the energy of the confined electron. This idea is tested by choosing a heterogeneous reference set of temporary states and comparing empirical correlation schemes based on Hartree-Fock orbital energies, Kohn-Sham orbital energies, and attachment energies computed with the equation-of-motion coupled-cluster method. The results show that using more reliable energies for the confined electron indeed enhances the predictive power of empirical correlation schemes and that useful correlations can be established beyond closely related families of molecules. Certain types of σ* states are still problematic, and the reasons for this behavior are analyzed. On the other hand, preliminary results suggest that the new scheme can even be useful for predicting energies of bound anions at a fraction of the computational cost of reliable ab initio calculations. It is then used to make predictions for bound and temporary states of the furantrione and croconic acid radical anions.

  15. Temporary new opening hours for Gate C

    CERN Multimedia

    GS Department

    2010-01-01

    Please note the new temporary opening hours for the gate C as from 22 September 2010 until 29 October 2010 (working days): Morning: between 7:00 a.m. and 9:00 a.m. Lunch: between 12:00 and 2:00 p.m. Evening: between 5:00 pm and 7:00 p.m. Traffic flow will be permitted in both directions during this period. Please minimize your speed accordingly and respect all road signs. GS-SEM Group General Infrastructure Services Department

  16. Criteria for diagnosis of temporary gluten intolerance.

    Science.gov (United States)

    McNeish, A S; Rolles, C J; Arthur, L J

    1976-04-01

    Strict criteria for the diagnosis of temporary gluten intolerance are formulated in the light of the case of an 8-week-old infant with severe diarrhoea and failure to thrive, who recovered on an elimination diet that was gluten-free. 8 weeks later an oral challenge with 2.5 g twice daily of powdered gluten for one day produced diarrhoea, weight loss, and impaired xylose absorption. Gluten was successfully reintroduced into the diet 9 months later without incident. Jejunal histology remains normal after 26 months of a daily diet that contains 5 to 10 g gluten.

  17. Temporary effects of alcohol on color vision

    Science.gov (United States)

    Geniusz, Maciej K.; Geniusz, Malwina; Szmigiel, Marta; Przeździecka-Dołyk, Joanna

    2017-09-01

    The color vision has been described as one to be very sensitive to the intake of several chemicals. The present research reviews the published literature that is concerned with color vision impairment due to alcohol. Most of this research considers people under long-term effects of alcohol. However, there is little information about temporary effects of alcohol on color vision. A group of ten volunteers aged 18-40 was studied. During the study levels of alcohol in the body were tested with a standard breathalyzer while color vision were studied using Farnsworth Munsell 100 Hue Color Vision Tests. Keywords: Col

  18. 76 FR 20287 - Superfund Site, New Bedford Harbor, New Bedford, MA: Anchorage Ground and Regulated Navigation Area

    Science.gov (United States)

    2011-04-12

    ... New Bedford Harbor hurricane barrier in the outer harbor. The pilot cap consists of sand and gravel... will still be available for use; the number of vessels using the anchorage is limited due to depth...'' N, 070 54'26.9'' W; thence along the shoreline and south side of the hurricane barrier to the...

  19. Anchorage of TiO2-blasted, HA-coated, and machined implants: an experimental study with rabbits

    DEFF Research Database (Denmark)

    Gotfredsen, K; Wennerberg, A; Johansson, C

    1995-01-01

    The purpose of this study was to evaluate the histometrical and biomechanical anchorage of TiO2-blasted implants and TiO2-blasted implants coated with hydroxyapatite. The control implants were machined. Twenty-six rabbits had a total of 156 implants placed in the proximal part of the tibia. Each ...

  20. A mixed-methods approach for analysing social support and social anchorage of single mothers’ personal networks

    NARCIS (Netherlands)

    Lumino, Rosaria; Ragozini, Giancarlo; van Duijn, Marijtje; Vitale, Maria Prosperina

    2017-01-01

    The present paper analyses the relationship among social support and personal networks by focusing on social anchorage, which is a specific dimension of social support conveying to what extent people feel integrated into their personal networks. Specifying when, why, and how personal relationships

  1. The "Real Self" and Inauthenticity: The Importance of Self-Concept Anchorage for Emotional Experiences in the Workplace

    Science.gov (United States)

    Sloan, Melissa M.

    2007-01-01

    I examine the utility of self-concept anchorage (as described by Turner 1976) in the analysis of inauthenticity in the workplace. As controlling internally felt emotion may distance the worker from her true feelings or true self, the management of emotion in the workplace can produce feelings of inauthenticity in the worker. This relationship has…

  2. [Correction of a mandibular alveolar protrusion using maxillary miniscrew anchorage in the treatment of a Class II division 1 malocclusion].

    Science.gov (United States)

    Haiim, Frederic

    2011-12-01

    This article describes a relatively simple method of reducing a mandibular alveolar protrusion without compensatory extraction of mandibular bicuspids or advancement of anterior teeth in the treatment of a Class II division 1 malocclusion. The use of well-planned skeletal anchorage specifically adapted to each specific situation is also well elucidated.

  3. 33 CFR 110.236 - Pacific Ocean off Barbers Point, Island of Oahu, Hawaii: Offshore pipeline terminal anchorages.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Pacific Ocean off Barbers Point, Island of Oahu, Hawaii: Offshore pipeline terminal anchorages. 110.236 Section 110.236 Navigation and... Grounds § 110.236 Pacific Ocean off Barbers Point, Island of Oahu, Hawaii: Offshore pipeline terminal...

  4. Local hypertrichosis: A rare complication of a temporary henna tattoo.

    Science.gov (United States)

    Akpolat, Nebahat Demet; Aras, Arzu

    2016-01-01

    Temporary henna tattoos have become increasingly widespread among children and young people, especially in holiday spots in recent years. Although reactions to henna tattoo are becoming progressively more common, only few cases of a henna pseudo-tattoo resulting in temporary hypertrichosis have been reported so far. Here, we have reported a 5-year-old girl who developed allergic contact dermatitis and localized hypertrichosis on her right arm after application of temporary henna tattoo during summer holiday.

  5. Assessing Posidonia oceanica seedling substrate preference: an experimental determination of seedling anchorage success in rocky vs. sandy substrates.

    Directory of Open Access Journals (Sweden)

    Adriana Alagna

    Full Text Available In the last decades the growing awareness of the ecological importance of seagrass meadows has prompted increasing efforts to protect existing beds and restore degraded habitats. An in-depth knowledge of factors acting as major drivers of propagule settlement and recruitment is required in order to understand patterns of seagrass colonization and recovery and to inform appropriate management and conservation strategies. In this work Posidonia oceanica seedlings were reared for five months in a land-based culture facility under simulated natural hydrodynamic conditions to identify suitable substrates for seedling anchorage. Two main substrate features were investigated: firmness (i.e., sand vs. rock and complexity (i.e., size of interstitial spaces between rocks. Seedlings were successfully grown in culture tanks, obtaining overall seedling survival of 93%. Anchorage was strongly influenced by substrate firmness and took place only on rocks, where it was as high as 89%. Anchorage occurred through adhesion by sticky root hairs. The minimum force required to dislodge plantlets attached to rocky substrates reached 23.830 N (equivalent to 2.43 kg, which would potentially allow many plantlets to overcome winter storms in the field. The ability of rocky substrates to retain seedlings increased with their complexity. The interstitial spaces between rocks provided appropriate microsites for seedling settlement, as seeds were successfully retained, and a suitable substrate for anchorage was available. In conclusion P. oceanica juveniles showed a clear-cut preference for hard substrates over the sandy one, due to the root system adhesive properties. In particular, firm and complex substrates allowed for propagule early and strong anchorage, enhancing persistence and establishment probabilities. Seedling substrate preference documented here leads to expect a more successful sexual recruitment on hard bottoms compared with soft ones. This feature could have

  6. Assessing Posidonia oceanica seedling substrate preference: an experimental determination of seedling anchorage success in rocky vs. sandy substrates.

    Science.gov (United States)

    Alagna, Adriana; Fernández, Tomás Vega; Anna, Giovanni D; Magliola, Carlo; Mazzola, Salvatore; Badalamenti, Fabio

    2015-01-01

    In the last decades the growing awareness of the ecological importance of seagrass meadows has prompted increasing efforts to protect existing beds and restore degraded habitats. An in-depth knowledge of factors acting as major drivers of propagule settlement and recruitment is required in order to understand patterns of seagrass colonization and recovery and to inform appropriate management and conservation strategies. In this work Posidonia oceanica seedlings were reared for five months in a land-based culture facility under simulated natural hydrodynamic conditions to identify suitable substrates for seedling anchorage. Two main substrate features were investigated: firmness (i.e., sand vs. rock) and complexity (i.e., size of interstitial spaces between rocks). Seedlings were successfully grown in culture tanks, obtaining overall seedling survival of 93%. Anchorage was strongly influenced by substrate firmness and took place only on rocks, where it was as high as 89%. Anchorage occurred through adhesion by sticky root hairs. The minimum force required to dislodge plantlets attached to rocky substrates reached 23.830 N (equivalent to 2.43 kg), which would potentially allow many plantlets to overcome winter storms in the field. The ability of rocky substrates to retain seedlings increased with their complexity. The interstitial spaces between rocks provided appropriate microsites for seedling settlement, as seeds were successfully retained, and a suitable substrate for anchorage was available. In conclusion P. oceanica juveniles showed a clear-cut preference for hard substrates over the sandy one, due to the root system adhesive properties. In particular, firm and complex substrates allowed for propagule early and strong anchorage, enhancing persistence and establishment probabilities. Seedling substrate preference documented here leads to expect a more successful sexual recruitment on hard bottoms compared with soft ones. This feature could have influenced P

  7. Thick-Walled Cylinder Theory Applied on a Conical Wedge Anchorage

    DEFF Research Database (Denmark)

    Bennitz, Anders; Grip, Niklas; Schmidt, Jacob Wittrup

    2011-01-01

    and axial symmetry. We simplify the resulting system of ten nonlinear equations and derive a method for solving them numerically. A comparison of plotted results for three different angles on the wedge’s outer surface and six different presetting distances follows.These results are also compared to both axi-symmetric...... and 3D FE (Finite Element) models. Analytical and FE axi-symmetric models show good correspondence, though compared to the 3D FE model, they show a clear difference in the predicted radial stress distribution on the FRP. Thus, the derived analytical model can be a useful and faster alternative to FE...... modeling of axi-symmetric anchorages. However, the model is of more restricted value and should be complemented by, for example, 3D FE models for other designs....

  8. Correction of bilateral impacted mandibular canines with a lip bumper for anchorage reinforcement.

    Science.gov (United States)

    Agarwal, Sachin; Yadav, Sumit; Shah, Neelesh V; Valiathan, Ashima; Uribe, Flavio; Nanda, Ravindra

    2013-03-01

    Multiple treatment options are available to patients with impacted manibular canines in addition to a retained deciduous canine. This article describes the treatment of a prepubertal girl, aged 10 years 6 months, with a skeletal Class I, dental Class II Division 1 malocclusion, retrognathic mandible, deep overbite, proclined maxillary incisors, midline diastema, and bilateral mandibular canine impaction. The orthodontic treatment plan included extraction of the deciduous canine and forced eruption of the impacted canines. A modified lip bumper appliance was used both for forced eruption and to reinforce anchorage. Through the collaborative efforts of an orthodontist and an oral surgeon, an excellent esthetic and functional outcome was achieved. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  9. Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern.

    Science.gov (United States)

    Farret, Marcel Marchiori

    2016-06-01

    This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO.

  10. Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

    Directory of Open Access Journals (Sweden)

    Marcel Marchiori Farret

    Full Text Available ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as one of the requirements to become diplomate by the BBO.

  11. The Effect of Freeze - thaw Cycles on Slope Anchorage and Preventive Measures of Research

    Science.gov (United States)

    Bi, Quanchao; Wang, Xuelei; Zhang, Mingxiu; Rao, Qiang; Fu, Zhixin; Su, Jianyao

    2017-10-01

    Freeze-thaw cycles have great harm to slope anchorage structure, and the theoretical system has not been formed because there are too many constraints and interrelations. This paper analyzes the failure principle and appearance of the slope under the freeze-thaw cycles and puts forward the prevention and control measures. On the whole, at this stage there is no way to raise the anchoring technology as a system to do the whole study. It is urgent to establish a complete concept and overall evaluation mechanism of rock and soil anchoring system, because it can give full play to the function of the favorable elements in the anchoring system and weaken the harm of the unfavorable elements so that the system can achieve the best working condition.

  12. Fibronectin assembly in the crypts of cytokinesis-blocked multilobular cells promotes anchorage-independent growth.

    Directory of Open Access Journals (Sweden)

    Rajesh Kumar Gupta

    Full Text Available Anchorage-independent growth is a characteristic feature of cancer cells. However, it is unclear whether it represents a cause or a consequence of tumorigenesis. For normal cells, integrin-mediated adhesion is required for completion of the G1 and cytokinesis stages of the cell cycle. This study identified a mechanism that can drive anchorage-independent growth if the G1 checkpoint is suppressed. Cells with defective G1 checkpoint progressed through several rounds of the cell cycle in suspension in spite of uncompleted cytokinesis, thereby forming bi- and multilobular cells. Aurora B and CEP55 were localized to midbodies between the lobes, suggesting that the cytokinesis process reached close to abscission. Integrin-mediated re-attachment of such cells induced cytokinesis completion uncoupled from karyokinesis in most cells. However, a portion of the cells instead lost the constriction and became binucleated. Also, long-term suspension culture in soft agar produced colonies where the cytokinesis block was overcome. This process was fibronectin-dependent since fibronectin-deficient cells did not form colonies unless fibronectin was expressed or exogenously added. While fibronectin normally is not deposited on non-adherent single cells, bi/multilobular cells accumulated fibronectin in the intussusceptions. Based on our data we conclude: 1 Suppression of the G1 checkpoint allows multiple rounds of the cell cycle in detached cells and thereby enables matrix formation on their surface. 2 Uncompleted cytokinesis due to cell detachment resumes if integrin interactions are re-formed, allowing colony formation in soft agar 3 Such delayed cell division can generate binucleated cells, a feature known to cause chromosomal instability.

  13. Maxillary molar distalization with the indirect Palatal miniscrew for Anchorage and Distalization Appliance (iPANDA).

    Science.gov (United States)

    Suzuki, Eduardo Yugo; Suzuki, Boonsiva

    2013-01-01

    Distalization of the maxillary molars is an important treatment option for the correction of Class II malocclusions. The purposes of this study were to introduce the clinical application of the indirect Palatal miniscrew Anchorage and Distalization Appliance (iPanda) and to describe the dental and skeletal effects obtained with this innovative appliance. Pretreatment (TO), post-distalization (T1), and posttreatment (T2) lateral cephalometric radiographs and dental casts of 20 consecutively treated adult patients (mean age 23.2 ± 4.7 years) with Class II molar relationship were analyzed. All patients were treated with the iPanda for maxillary molar distalization. The iPanda was anchored on a pair of midpalatal miniscrew implants to deliver the distalizing force to the maxillary first molars. The iPanda was the only appliance used during the distalization phase of treatment. A paired t test analysis was used to statistically assess the effects of treatment. A Class I molar relationship was obtained in a mean period of 3.2 ± 0.6 months. Cephalometric analysis demonstrated that the maxillary first molars were significantly distalized by an average 4.5 ± 1.5 mm (P mandibular plane was observed. Dental model analysis demonstrated an asymmetric pattern of distalization between right (4.5 ± 2.2 mm) and left (3.1 ± 2.1 mm) first molars. The transverse width of the dental arch was maintained. No significant rotation of the first molars was observed. This study demonstrated that the innovative iPanda is effective to bodily distalize the maxillary molars into a Class I molar relationship and to provide maximum anchorage.

  14. Geology and ground-water resources of the Anchorage area, Alaska

    Science.gov (United States)

    Cederstrom, Dagfin John; Trainer, Frank W.; Waller, Roger Milton

    1964-01-01

    The Anchorage area, at the head of Cook Inlet in south-central Alaska, occupies 150 square miles of a glaciated lowland and lies between two estuaries and the Chugach Mountains. Two military bases are in the area; Anchorage is the largest city in Alaska and the chief transportation center for this part of the State. The bedrock in the Anchorage area is chiefly Tertiary shale in the lowland and metamorphic rocks of Mesozoic age beneath the adjacent mountain slopes. Glacial drift which underlies nearly the entire area has an average thickness of several hundred feet and appears to include at least five sheets of deposits, two of which are exposed. The drift consists of till, outwash stream and lake deposits (sand and gravel), and estuarine (and lake) deposits (clay and silt). The stratigraphy and lateral distribution of the deposits are complex, but data at hand s, how that the thickest deposits, including all the estuarine and lake sediment and most of the stream-deposited sediment, are beneath the lowland away from the mountain wall, and that the deposits near the mountains are till and subordinate outwash sediments. Deposits of sand and gravel laid down by outwash streams in channels and on outwash plains are the most important aquifers, and the only ones which yield large quantities of ground water from single beds. Thin layers of sandy or gravelly material in till are also important aquifers although they yield relatively small quantities of water. Bedded sand and silt associated with the estuarine and lake(?) clay commonly becomes unstable during drilling and pumping, and has been successfully developed in only a few wells. Unconfined aquifers are extensive, but permeable saturated material is thin in many places and water supplies available from them are small or undependable in those places. The most important aquifers are confined or artesian. Clay and till form the confining beds: the till is somewhat 'leaky' in many places. Near Anchorage the buried water

  15. 8 CFR 245a.2 - Application for temporary residence.

    Science.gov (United States)

    2010-01-01

    ... (No. 76-C-4268 (N.D. ILL. March 22, 1977)); that is, an alien from an independent country of the... States was due merely to a brief temporary trip abroad due to emergent or extenuating circumstances... employment and travel abroad for temporary resident status applicants under section 245A(a) of the Act may...

  16. 14 CFR 47.16 - Temporary registration numbers.

    Science.gov (United States)

    2010-01-01

    ...) Temporary registration numbers may not be used to fly aircraft into the United States for the purpose of... for as many temporary registration numbers as are necessary for his business. The application must be... used on a flight outside the United States for delivery purposes, the holder shall record the...

  17. 23 CFR 1235.5 - Temporary removable windshield placards.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Temporary removable windshield placards. 1235.5 Section 1235.5 Highways NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION AND FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GUIDELINES UNIFORM SYSTEM FOR PARKING FOR PERSONS WITH DISABILITIES § 1235.5 Temporary removable windshield placards. (a)...

  18. Temporary Employment Contracts in Academia: A Real Option View

    Science.gov (United States)

    Brady, Malcolm

    2017-01-01

    This paper examines the strategic use of temporary employment contracts in dealing with supply uncertainty in the form of employee ability that is slow to reveal itself, for example in academia where there exist significant time lags in demonstration of research ability. A temporary contract is modeled as a real option, specifically as a…

  19. 25 CFR 700.175 - Temporary emergency moves.

    Science.gov (United States)

    2010-04-01

    ... move not been made. (iv) The Commission will pay all costs in connection with the move to temporary... temporary move, based upon the criteria set forth by the Commission. (2) The estimated duration of the... Indians THE OFFICE OF NAVAJO AND HOPI INDIAN RELOCATION COMMISSION OPERATIONS AND RELOCATION PROCEDURES...

  20. 22 CFR 123.3 - Temporary import licenses.

    Science.gov (United States)

    2010-04-01

    ... articles, unless exempted from this requirement pursuant to § 123.4. This requirement applies to: (1) Temporary imports of unclassified defense articles that are to be returned directly to the country from... DEFENSE ARTICLES § 123.3 Temporary import licenses. (a) A license (DSP-61) issued by the Directorate of...

  1. 32 CFR Attachment 5 to Part 855 - Sample Temporary Agreement

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Sample Temporary Agreement 5 Attachment 5 to Part 855 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE AIRCRAFT CIVIL AIRCRAFT USE OF UNITED STATES AIR FORCE AIRFIELDS Pt. 855, Att. 5 Attachment 5 to Part 855—Sample Temporary...

  2. Bioabsorbable radiopaque water-responsive shape memory embolization plug for temporary vascular occlusion.

    Science.gov (United States)

    Wong, Yee Shan; Salvekar, Abhijit Vijay; Zhuang, Kun Da; Liu, Hui; Birch, William R; Tay, Kiang Hiong; Huang, Wei Min; Venkatraman, Subbu S

    2016-09-01

    We describe the preparation, characterization and evaluation of a biodegradable radiopaque water-triggered shape memory embolization plug for temporary vascular occlusion. The shape memory occluding device consists of a composite of a radio-opaque filler and a poly (dl-lactide-co-glycolide) (PLGA) blend, which was coated with a crosslinked poly (ethylene glycol) diacrylate (PEGDA) hydrogel. The mechanical properties, the degradation timeframe, the effect of programming conditions on the shape memory behaviour and the extent of radio-opacity for imaging were evaluated. Based on the tests, the mechanism responsible for the water-induced shape memory effect in such an embolization plug was elucidated. Suitable materials were optimized to fabricate an embolic plug prototype and its in vitro performance was evaluated as an occlusion rate (using a custom-built set up) and its biocompatibility. Finally, a feasibility study was conducted in vivo in a rabbit model to investigate the ease of device deployment, device migration and extent of vessel occlusion. The in vivo results demonstrated that the prototypes were visible under fluoroscopy and complete vascular occlusion occurred within 2 min of deployment of the prototypes in vivo. In conclusion, the developed embolization plug enables controlled and temporary vascular embolization, and is ready for safety studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Schedules of Controlled Substances: Temporary Placement of 4-Fluoroisobutyryl Fentanyl into Schedule I. Temporary scheduling order.

    Science.gov (United States)

    2017-05-03

    The Administrator of the Drug Enforcement Administration is issuing this temporary scheduling order to schedule the synthetic opioid, N-(4-fluorophenyl)-N-(1-phenethylpiperidin-4-yl)isobutyramide (4-fluoroisobutyryl fentanyl or para-fluoroisobutyryl fentanyl), and its isomers, esters, ethers, salts and salts of isomers, esters, and ethers, into schedule I pursuant to the temporary scheduling provisions of the Controlled Substances Act. This action is based on a finding by the Administrator that the placement of 4-fluoroisobutyryl fentanyl into schedule I of the Controlled Substances Act is necessary to avoid an imminent hazard to the public safety. As a result of this order, the regulatory controls and administrative, civil, and criminal sanctions applicable to schedule I controlled substances will be imposed on persons who handle (manufacture, distribute, reverse distribute, import, export, engage in research, conduct instructional activities or chemical analysis, or possess), or propose to handle, 4-fluoroisobutyryl fentanyl.

  4. 78 FR 44965 - Notice of Temporary Closure and Temporary Restrictions of Specific Uses on Public Lands for the...

    Science.gov (United States)

    2013-07-25

    ... human body a controlled substance in violation of any state or Federal law, or regulation issued... Desert playa. DATES: The temporary closure and temporary restrictions will be in effect from August 12... approved by the BLM authorized officer. B. Alcohol 1. Possession of an open container of an alcoholic...

  5. Anchorage provided during intra-arch distal molar movement: a comparison between the Nance appliance and a fixed frontal bite plane

    National Research Council Canada - National Science Library

    Bondemark, Lars; Thornéus, Johan

    2005-01-01

    ...: use of an intra-arch Ni-Ti coil appliance with either NA or FBP to provide anchorage during a six-month molar distalization period, no orthodontic treatment before molar distalization, and first...

  6. Evaluation of the effects of skeletal anchoraged Forsus FRD using miniplates inserted on mandibular symphysis: A new approach for the treatment of Class II malocclusion

    National Research Council Canada - National Science Library

    Unal, Tuba; Celikoglu, Mevlut; Candirli, Celal

    2015-01-01

    ...) appliance with miniplate anchorage for the treatment of skeletal Class II malocclusion. The prospective clinical study group included 17 patients (11 girls and 6 boys; mean age 12.96 ± 1.23 years...

  7. Bio-cultural anchorage of the prickly pear cactus in Tlalnepantla (Morelos, Mexico

    Directory of Open Access Journals (Sweden)

    Torres-Salcido, Gerardo

    2016-06-01

    Full Text Available The prickly pear cactus is a source of food with strong bio-cultural anchorage in Mexico. This is due to at least three factors: 1 the nature and heritage of cacti; 2 cultural heritage; and 3 the socio-cultural relationships with historical and symbolic roots that have facilitated knowledge of how to cultivate it and how to use it. The aim of this article is to put factors of territorial anchorage and its historical transformation in context by examining the case of the municipality of Tlalnepantla in the state of Morelos, Mexico. This community has experienced accelerated change due to the exchange of traditional crops for the prickly pear cactus and the integration of farming, commercialization and agro-transformation. Our hypothesis is that the market, internal conflicts and a lack of socio-institutional coordination have put social organization into crisis, favoring the territorial spread of the prickly pear cactus and making the Local Agro-Food Systems (LAFS of Tlalnepantla less competitive. The conclusions highlight important economic and social advances whose roots lie in the strengthening and anchorage of the territory-product. However, circumstances both internal and external to the community persist, such as intra-community conflicts, the international market and cultural paradigm shifts that affect the producers and put consolidation of the LAFS at risk.El nopal es un alimento con un fuerte anclaje bio-cultural en México, propiciado por al menos tres factores: 1 la naturaleza y el patrimonio de cactáceas; 2 el patrimonio cultural; y, 3 las relaciones socio-culturales que han permitido un “saber hacer” y un “saber utilizar” con raíces históricas y simbólicas. El objetivo es situar los factores de anclaje territorial y su transformación histórica tomando como caso el municipio de Tlalnepantla, en el estado de Morelos, México. Esta comunidad ha experimentado un acelerado cambio por la reconversión de los cultivos

  8. Transdisciplinary treatment of Class III malocclusion using conventional implant-supported anchorage: 10-year posttreatment follow-up

    Directory of Open Access Journals (Sweden)

    Mariana Roennau Lemos Rinaldi

    2015-06-01

    Full Text Available INTRODUCTION: Combined treatment offers advantages for partially edentulous patients. Conventional implants, used as orthodontic anchorage, enable previous orthodontic movement, which provides appropriate space gain for crown insertion. OBJECTIVE: This case report describes the treatment of a 61-year and 10-month-old patient with negative overjet which made ideal prosthetic rehabilitation impossible, thereby hindering dental and facial esthetics. CASE REPORT: After a diagnostic setup, conventional implants were placed in the upper arch to anchor intrusion and retract anterior teeth. Space gain for lateral incisors was achieved in the lower arch by means of an orthodontic appliance. CONCLUSIONS: Integrated planning combining Orthodontics and Implantology provided successful treatment by means of conventional implant-supported anchorage. The resulting occlusal relationship proved stable after 10 years.

  9. Transdisciplinary treatment of Class III malocclusion using conventional implant-supported anchorage: 10-year posttreatment follow-up

    Science.gov (United States)

    Rinaldi, Mariana Roennau Lemos; Rizzatto, Susana Maria Deon; de Menezes, Luciane Macedo; Polido, Waldemar Daudt; de Lima, Eduardo Martinelli Santayanna

    2015-01-01

    INTRODUCTION: Combined treatment offers advantages for partially edentulous patients. Conventional implants, used as orthodontic anchorage, enable previous orthodontic movement, which provides appropriate space gain for crown insertion. OBJECTIVE: This case report describes the treatment of a 61-year and 10-month-old patient with negative overjet which made ideal prosthetic rehabilitation impossible, thereby hindering dental and facial esthetics. CASE REPORT: After a diagnostic setup, conventional implants were placed in the upper arch to anchor intrusion and retract anterior teeth. Space gain for lateral incisors was achieved in the lower arch by means of an orthodontic appliance. CONCLUSIONS: Integrated planning combining Orthodontics and Implantology provided successful treatment by means of conventional implant-supported anchorage. The resulting occlusal relationship proved stable after 10 years. PMID:26154459

  10. Treatment Effects of Occipitomental Anchorage Appliance of Maxillary Protraction Combined with Chincup Traction in Children with Class III Malocclusion

    OpenAIRE

    Hsiang-Chien Lin; Hong-Po Chang; Hsin-Fu Chang

    2007-01-01

    Little information related to the treatment effects of the occipitomental anchorage (OMA) appliance of maxillary (Mx) protraction combined with chincup traction is available. The aim of this study was to investigate the treatment effects of the OMA orthopedic appliance on patients with Class III malocclusion. Methods: Pretreatment and post-treatment cephalometric records of 20 consecutively treated patients with Class III malocclusions were evaluated and compared with a matched sample of u...

  11. Permanent and temporary pacemaker implantation after orthotopic heart transplantation

    Directory of Open Access Journals (Sweden)

    Bacal Fernando

    2000-01-01

    Full Text Available PURPOSE:To determine the indication for and incidence and evolution of temporary and permanent pacemaker implantation in cardiac transplant recipients. METHODS: A retrospective review of 114 patients who underwent orthotopic heart transplantation InCor (Heart Institute USP BR between March 1985 and May 1993. We studied the incidence of and indication for temporary pacing, the relationship between pacing and rejection, the need for pemanent pacing and the clinical follow-up. RESULTS: Fourteen of 114 (12%heart transplant recipients required temporary pacing and 4 of 114 (3.5% patients required permanent pacing. The indication for temporary pacing was sinus node dysfunction in 11 patients (78.5% and atrioventricular (AV block in 3 patients (21.4%. The indication for permanent pacemaker implantation was sinus node dysfunction in 3 patients (75% and atrioventricular (AV block in 1 patient (25%. We observed rejection in 3 patients (21.4% who required temporary pacing and in 2 patients (50% who required permanent pacing. The previous use of amiodarone was observed in 10 patients (71.4% with temporary pacing. Seven of the 14 patients (50% died during follow-up. CONCLUSION: Sinus node dysfunction was the principal indication for temporary and permanent pacemaker implantation in cardiac transplant recipients. The need for pacing was related to worse prognosis after cardiac transplantation.

  12. Return to Work After Temporary Disability Pension in Finland.

    Science.gov (United States)

    Laaksonen, Mikko; Gould, Raija

    2015-09-01

    When it is possible that the employee's work ability can be restored through treatment or rehabilitation, disability pension in Finland is granted for a fixed period. We examined which factors are associated with return to work (RTW) after such temporary disability pension. The study included all Finnish residents whose temporary disability pension from the earnings-related pension system started in 2008 (N = 10,269). Competing risks regression analysis was applied to examine register-based determinants for RTW after temporary disability pension due to mental disorders, musculoskeletal diseases, other diseases, and injury over a 4-year follow-up period. The overall cumulative incidence of RTW was 25%. RTW was more probable after temporary disability pension due to injury and musculoskeletal diseases and less probable after temporary disability pension due to mental disorders. Younger age and higher education increased RTW but differences between genders, private and public sector employees, and occupational classes were relatively small. The probability of RTW was higher among those who were employed before their temporary disability pension (subhazard ratio in multivariate analysis 2.41 (95% CI 2.13-2.72) and among the 9% who participated in vocational rehabilitation during their pension [SHR 2.10 (95% CI 1.90-2.31)]. With some exceptions, the results were fairly similar for all diagnostic causes of temporary disability pension. Return to work after temporary disability pension was relatively uncommon. Nevertheless, in all diagnostic groups RTW continued for the whole follow-up period. The low educated and those not employed before temporary disability pension need more support in their RTW. The strong association between vocational rehabilitation and RTW suggests that increasing rehabilitation among those with impaired work ability may promote RTW.

  13. Comparative evaluation of micro-implant and headgear anchorage used with a pre-adjusted appliance system.

    Science.gov (United States)

    Ma, Junqing; Wang, Lin; Zhang, Weibing; Chen, Wenjing; Zhao, Chunyang; Smales, Roger J

    2008-06-01

    The aim of this study was to compare and evaluate the anchorage effectiveness of using either micro-implants or extraoral headgear with the McLaughlin-Bennett-Trevisi (MBT) system. Thirty young Chinese adults (14 males and 16 females) aged 18-22 years with anterior bimaxillary protrusion were divided randomly into two equal groups, treated with the MBT system anchored by either micro-implants or headgear. Nine measurements obtained before and after treatment from lateral cephalometric radiographs were assessed for the two groups, using the Mann-Whitney U test with alpha = 0.05 for statistical significance. The maxillary incisors in the micro-implant group were significantly more retracted and intruded, while the lower incisors were more lingually inclined, than in the headgear group. The occlusal and mandibular planes were rotated more counterclockwise in the micro-implant group than in the headgear group (P headgear anchorage, micro-implant anchorage may counteract clockwise rotation of the occlusal and mandibular planes and result in different final positions for the maxillary and mandibular incisors.

  14. Use of palatal miniscrew anchorage and lingual multi-bracket appliances to enhance efficiency of molar scissors-bite correction.

    Science.gov (United States)

    Tamamura, Nagato; Kuroda, Shingo; Sugawara, Yasuyo; Takano-Yamamoto, Teruko; Yamashiro, Takashi

    2009-05-01

    This article reports the successful treatment method of scissors-bite correction using miniscrew anchorage and a lingual multi-bracket appliance. A female patient, 17 years and 4 months old, had a chief complaint of crowding of anterior teeth. The patient was given the diagnosis of Angle Class I malocclusion with bimaxillary protrusion and incisor crowding. She also showed a scissors-bite of the second molar on the right side. Miniscrews were inserted into the palatal region of the upper second molar to reinforce the anchorage, and a lingual multi-bracket appliance was placed into the maxilla. Miniscrews inserted palatally were used to correct the scissors-bite in the first 3 months; afterward, they were used to retract the six anterior teeth. The total active treatment period was 26 months. Because of the bite-plane effect, the upper and lower molars were separated in occlusion, and the scissors-bite was corrected effectively within a short time. The combined use of palatal miniscrew anchorage and lingual multi-bracket appliances enhances efficiency of molar scissors-bite correction.

  15. Insertion devices

    CERN Document Server

    Bahrdt, J

    2006-01-01

    The interaction of an insertion device with the electron beam in a storage ring is discussed. The radiation property including brightness, ux and polarization of an ideal and real planar and helical / elliptical device is described. The magnet design of planar, helical, quasiperiodic devices and of devices with a reduced on axis power density are resumed.

  16. Comparison of the zygoma anchorage system with cervical headgear in buccal segment distalization.

    Science.gov (United States)

    Kaya, Burçak; Arman, Ayça; Uçkan, Sina; Yazici, Ayşe Canan

    2009-08-01

    This prospective study aimed to evaluate the effects of the zygoma anchorage system (ZAS) in buccal segment distalization in comparison with cervical headgear (CH). Thirty patients with Class II dental malocclusions were included in the study and were divided into two equal groups: the first group (10 females and 5 males, mean age 14.74 years at T1) received buccal segment distalization with ZAS and the second group (8 females and 7 males, mean age 15.26 years at T1) with CH. The skeletal, dental, and soft tissue changes were measured on cephalograms obtained before (T1) and after (T2) distalization, and these changes were statistically evaluated using a repeated measures analysis of variance, Mann-Whitney U-test, and Wilcoxon test. The Class II buccal segment relationship was corrected to a Class I in an average period of 9.03 +/- 0.62 months in the ZAS group and 9.00 +/- 0.76 months in the CH group. Significant distalization was observed for the posterior teeth in both groups (P Class II malocclusions.

  17. Bilateral en-masse distalization of maxillary posterior teeth with skeletal anchorage: a case report

    Directory of Open Access Journals (Sweden)

    Saeed Noorollahian

    Full Text Available ABSTRACT Objective: The aim of this study was to introduce a new method for bilateral distal movement of the entire maxillary posterior segment. Case report: A 17-year-old girl with Class I skeletal malocclusion (end-to-end molar relationships, deviated midline and space deficiency for left maxillary canine was referred for orthodontic treatment. She did not accept maxillary first premolars extraction. A modified Hyrax appliance (Dentaurum Ispringen, Germany was used for bilateral distalization of maxillary posterior teeth simultaneously. Expansion vector was set anteroposteriorly. Posterior legs of Hyrax were welded to first maxillary molar bands. All posterior teeth on each side consolidated with a segment of 0.017 × 0.025-in stainless steel wire from the buccal side. Anterior legs of Hyrax were bent into eyelet form and attached to the anterior palate with two mini-screws (2 × 10 mm (Jeil Medical Corporation Seoul, South Korea. Hyrax opening rate was 0.8 mm per month. Lateral cephalometric radiographs were used to evaluate the extent of distal movement. 3.5-mm distalization of posterior maxillary teeth was achieved in five months. Results: A nearly bodily distal movement without anchorage loss was obtained. Conclusion: The mini-screw-supported modified Hyrax appliance was found to be helpful for achieving en-masse distal movement of maxillary posterior teeth.

  18. Management of acquired open bite associated with temporomandibular joint osteoarthritis using miniscrew anchorage

    Science.gov (United States)

    Yamano, Eizo; Inubushi, Toshihiro; Kuroda, Shingo

    2012-01-01

    This article reports the orthodontic treatment of a patient with skeletal mandibular retrusion and an anterior open bite due to temporomandibular joint osteoarthritis (TMJ-OA) using miniscrew anchorage. A 46-year-old woman had a Class II malocclusion with a retropositioned mandible. Her overjet and overbite were 7.0 mm and -1.6 mm, respectively. She had limited mouth opening, TMJ sounds, and pain. Condylar resorption was observed in both TMJs. Her TMJ pain was reduced by splint therapy, and then orthodontic treatment was initiated. Titanium miniscrews were placed at the posterior maxilla to intrude the molars. After 2 years and 7 months of orthodontic treatment, an acceptable occlusion was achieved without any recurrence of TMJ symptoms. The retropositioned mandible was considerably improved, and the lips showed less tension upon lip closure. The maxillary molars were intruded by 1.5 mm, and the mandible was subsequently rotated counterclockwise. Magnetic resonance imaging of both condyles after treatment showed avascular necrosis-like structures. During a 2-year retention period, an acceptable occlusion was maintained without recurrence of the open bite. In conclusion, correction of open bite and clockwise-rotated mandible through molar intrusion using titanium miniscrews is effective for the management of TMJ-OA with jaw deformity. PMID:23112945

  19. Management of acquired open bite associated with temporomandibular joint osteoarthritis using miniscrew anchorage.

    Science.gov (United States)

    Tanaka, Eiji; Yamano, Eizo; Inubushi, Toshihiro; Kuroda, Shingo

    2012-06-01

    This article reports the orthodontic treatment of a patient with skeletal mandibular retrusion and an anterior open bite due to temporomandibular joint osteoarthritis (TMJ-OA) using miniscrew anchorage. A 46-year-old woman had a Class II malocclusion with a retropositioned mandible. Her overjet and overbite were 7.0 mm and -1.6 mm, respectively. She had limited mouth opening, TMJ sounds, and pain. Condylar resorption was observed in both TMJs. Her TMJ pain was reduced by splint therapy, and then orthodontic treatment was initiated. Titanium miniscrews were placed at the posterior maxilla to intrude the molars. After 2 years and 7 months of orthodontic treatment, an acceptable occlusion was achieved without any recurrence of TMJ symptoms. The retropositioned mandible was considerably improved, and the lips showed less tension upon lip closure. The maxillary molars were intruded by 1.5 mm, and the mandible was subsequently rotated counterclockwise. Magnetic resonance imaging of both condyles after treatment showed avascular necrosis-like structures. During a 2-year retention period, an acceptable occlusion was maintained without recurrence of the open bite. In conclusion, correction of open bite and clockwise-rotated mandible through molar intrusion using titanium miniscrews is effective for the management of TMJ-OA with jaw deformity.

  20. Treatment of a case of skeletal class II malocclusion with temporomandibular joint disorder using miniscrew anchorage.

    Science.gov (United States)

    Kaku, Masato; Koseki, Hiroyuki; Kawazoe, Aki; Abedini, Sara; Kojima, Shunichi; Motokawa, Masahide; Ohtani, Junji; Fujita, Tadashi; Kawata, Toshitsugu; Tanne, Kazuo

    2011-04-01

    At the present time, there are no reports in the literature on the treatment of temporomandibular joint disorder (TMD) by intrusion of molars using mini-screws. This case report describes the treatment for a female patient, aged 19 years seven months, with a TMD and an excessive lower anterior facial height. Overjet and overbite were +5.0 mm and +0.5 mm, respectively. The patient had a history of orthodontic treatment in which her first premolars were all extracted. During the first orthodontic treatment, a clockwise mandibular rotation was observed as a result of the increase of posterior dentoalveolar height. She had temporomandibular joint (TMJ) pain during mouth opening and complained of difficulty in eating due to masticatory dysfunction. The pretreatment Schuller views of both TMJ showed a posterior condyle position. In order to correct the overjet, molar relationship and the mandibular condyle position, a miniscrew was inserted into the palatal region of the upper first molar to intrude the upper posterior teeth. As the upper molars were intruded, the overjet was decreased, and a class I molar relationship was achieved by a counterclockwise mandibular rotation. After one year of treatment, an acceptable occlusion was achieved, and the condyle moved into centric position in the glenoid fossa. The patient's teeth continued to be stable, and she had no pain in TMJ after a retention period of three years. The result of this treatment showed that molar intrusion using miniscrew anchorage is effective for treatment of a TMD patient with a posterior condyle position.

  1. PAX2 regulates ADAM10 expression and mediates anchorage-independent cell growth of melanoma cells.

    Directory of Open Access Journals (Sweden)

    Sophia Boyoung Lee

    Full Text Available PAX transcription factors play an important role during development and carcinogenesis. In this study, we investigated PAX2 protein levels in melanocytes and melanoma cells by Western Blot and immunofluorescence analysis and characterized the role of PAX2 in the pathogenesis of melanoma. In vitro we found weak PAX2 protein expression in keratinocytes and melanocytes. Compared to melanocytes increased PAX2 protein levels were detectable in melanoma cell lines. Interestingly, in tissue sections of melanoma patients nuclear PAX2 expression strongly correlated with nuclear atypia and the degree of prominent nucleoli, indicating an association of PAX2 with a more atypical cellular phenotype. In addition, with chromatin immunoprecipitation assay, PAX2 overexpression and PAX2 siRNA we present compelling evidence that PAX2 can regulate ADAM10 expression, a metalloproteinase known to play important roles in melanoma metastasis. In human tissue samples we found co-expression of PAX2 and ADAM10 in melanocytes of benign nevi and in melanoma cells of patients with malignant melanoma. Importantly, the downregulation of PAX2 by specific siRNA inhibited the anchorage independent cell growth and decreased the migratory and invasive capacity of melanoma cells. Furthermore, the downregulation of PAX2 abrogated the chemoresistance of melanoma cells against cisplatin, indicating that PAX2 expression mediates cell survival and plays important roles during melanoma progression.

  2. Photoelastic stress analysis of mandibular molars moved distally with the skeletal anchorage system.

    Science.gov (United States)

    Nakamura, Atsushi; Teratani, Tsuyoshi; Itoh, Hidemi; Sugawara, Junji; Ishikawa, Hiroyuki

    2007-11-01

    The purpose of this study was to analyze photoelastically the stress distribution around teeth in the simulated distal movement of mandibular molars with the skeletal anchorage system. Two types of the photoelastic mandibular dentition models were used, 1 before and 1 after distal movement of the second molar. The experiment was performed with 3 forms of traction--first-molar single traction, second-molar single traction, and simultaneous first- and second-molar traction. The direction of traction was set parallel to the occlusal plane and at an angle of 30 degrees downward to the occlusal plane. In the first-molar single traction model, extremely high stress was generated around the first molar with traction parallel to the occlusal plane. With the traction 30 degrees downward to the occlusal plane, all models showed the stress around the molars extended distally and downward. Simultaneous traction of the first and second molars might be preferable to the sequential traction of each molar to prevent the unfavorable distal tipping of the first molar. Regardless of whether simultaneous or sequential traction is used, the downward traction to the occlusal plane seems to induce intrusion of the molars as well as their distal movement.

  3. Sealing of temporary cements in endodontics

    Directory of Open Access Journals (Sweden)

    Eduardo Gomes Ferraz

    2009-10-01

    Full Text Available Objective: The aim of this study was to assess the coronal leakage of three temporary cements in endodontics: Bioplic® (Biodinâmica, Londrina, Brazil, IRM® (Dentsply, Petrópolis, Brazil and Coltosol® (Vigodent, Bonsucesso, Brazil. Methods: Forty human pre-molars were divided into four groups: I (Bioplic® + adhesive system, II (Bioplic®, Biodinâmica, Londrina, Brasil, III (IRM®, Dentsply, Petrópolis, Brasil, and IV (Coltosol®, Vigodent, Bonsucesso, Brasil. The teeth were immersed in 1% Rodamine and kept at 37°C for 24h. They were then thermal cycled for seven days. Temperatures ranged between 5, 37 and 50°C. After longitudinal sectioning the leakage was measured in mm and statistical analysis was performed using the ANOVA and Tukey tests with a level of significance of 5%.Results: In the group in which Bioplic® was used with adhesive, a lower level of leakage was detected (0.37 ± 0.24. There was significant difference (p<0.05 between groups I and III, I and IV, II and III. Conclusion: It was concluded that all the tested material showed coronal leakage and that the use of the (Bioplic® Biodinâmica, Londrina, Brasilplus adhesive system showed the lowest level of leakage.

  4. A simple mini-screw assembly for simultaneous molar uprighting and distalization--a case of adjunctive adult orthodontics.

    Science.gov (United States)

    Reddy, Vijay; Parmar, Renu; Jamadar, Irfan Abdul Razak; Reddy, Rajesh; Reddy, Deepti

    2013-01-01

    Anchorage is a major concern in adult mutilated dentition. However, with the explosive development of Temporary Anchorage Devices (TADs) newer avenues in orthodontic treatment philosophy have opened up. Mini-screws are found to be stable during such treatments, demonstrating that they could provide absolute anchorage for tooth movement. The present article describes a simple, yet effective technique for simultaneous molar uprighting and distalization, using direct skeletal anchorage using a mini-screw supported assembly in a 38 years old male patient as part of adjunctive adult orthodontics with mutilated dentition.

  5. The Liminality of Temporary Agency Work: Exploring the Dimensions of Temporary Agency Workers’ Liminal Experience

    DEFF Research Database (Denmark)

    Winkler, Ingo; Mahmood, Mustafa Khalil

    2015-01-01

    along which liminality can unfold in organizational and work-related contexts. We argue that future studies should explore the various dimensions in other contexts of passages from one relatively stable state to another. In doing so, similarities and differences between various liminal experiences...... on political anthropology we identify the dimensions of ‘types of subjects,’‘time,’ ‘space,’ and ‘scale’ in order to analytically unlock the liminal experience. Exemplifying our concept we present the findings from an own study of temporary agency workers in Denmark. Exploring the workers’ interpretations...

  6. 20 CFR 655.20 - Applications for temporary employment certification.

    Science.gov (United States)

    2010-04-01

    ... Nursing in the United States (H-2B Workers) § 655.20 Applications for temporary employment certification..., the employer will be required to conduct another labor market for the portion of time beyond 12 months. ...

  7. 20 CFR 655.21 - Supporting evidence for temporary need.

    Science.gov (United States)

    2010-04-01

    ... Attestations for Temporary Employment in Occupations Other Than Agriculture or Registered Nursing in the United... containing the following: (1) A description of the employer's business history and activities (i.e., primary...

  8. 44 CFR 9.13 - Particular types of temporary housing.

    Science.gov (United States)

    2010-10-01

    ... is the only practicable alternative. The following factors shall be substituted for the factors in... risk to the temporary housing occupant; (iii) Cost effectiveness; (iv) Social and neighborhood patterns...

  9. 7 CFR 160.41 - Issuance of temporary license.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND... processor of the need therefor and the competency of the applicant for such temporary license. Such...

  10. Drying firewood in a temporary solar kiln: a case study.

    Science.gov (United States)

    George R. Sampson; Anthony F. Gasbarro

    1986-01-01

    A pilot study was undertaken to determine drying rates for small diameter, unsplit paper birch firewood that was dried: (1) in a conventional top-covered pile; (2) in a simple, temporary solar kiln; and (3) in tree length. Drying rates were the same for firewood piles whether they were in the temporary solar kilns or only covered on top to keep rain or snow from...

  11. The savings behavior of temporary and permanent migrants in Germany

    OpenAIRE

    Bauer, Thomas K.; Sinning, Mathias

    2005-01-01

    This paper examines the relative savings position of migrant households in West Germany, paying particular attention to differences between temporary and permanent migrants. Utilizing household level data from the German Socio-Economic Panel (GSOEP), our findings reveal significant differences in the savings rates between foreign-born and German-born individuals. These differences disappear, however, for temporary migrants, if their remittances are taken into account. Fixed effects estimation...

  12. The impacts of temporary and anticipated tourism spending

    OpenAIRE

    Grant Allan; Patrizio Lecca; Kim Swales

    2014-01-01

    Part of the local economic impact of a major sporting event comes from the associated temporary tourism expenditures. Typically demand-driven Input-Output (IO) methods are used to quantify the impacts of such expenditures. However, IO modelling has specific weaknesses when measuring temporary tourism impacts; particular problems lie in its treatment of factor supplies and its lack of dynamics. Recent work argues that Computable General Equilibrium (CGE) analysis is more appropriate and this h...

  13. Temporary worsening of kidney function following aortic reconstructive surgery.

    Science.gov (United States)

    Ghaheri, Hafez; Kazemzadeh, Gholam Hossein; Beigi, Ali Akbar

    2008-07-01

    Little is known about the incidence of temporary kidney dysfunction following major vascular surgeries. We aimed to assess the frequency of temporary decreased kidney function following aortic surgeries. In a retrospective study, we assessed 108 hospital records of the patients who had undergone elective open abdominal surgery of aortic aneurysm. Preoperative and postoperative (days 1, 2, and 3) data on estimated glomerular filtration rate (GFR) were collected and evaluated in relation to the patients' clinical characteristics and outcomes. A decline greater than 10% in GFR on day 1 or 2, and then, an increase of GFR to a level of maximum 10% below the baseline value on the third postoperative day was considered as temporary worsening of kidney function. Postoperative alterations of GFR not greater than 10% in relation to the baseline were considered as improved or unchanged kidney function. Two patients with persistent decrease in GFR were excluded. Temporary worsening of kidney function was seen in 25 patients (23.6%). Short-term mortality rate was 44.0% in this group of patients, while it was 17.3% in those without decreased GFR (P = .006). According to the regression analysis, the only predictor of mortality was temporary worsening of kidney function, with a hazard ratio of 4.03 (95% confidence interval, 1.44 to 11.31; P = .008). Nearly 1 out of 4 aortic surgeries results in kidney dysfunction. Albeit temporary in most cases, it seems to be associated with a higher short-term mortality rate.

  14. [Histological observation of microscrews anchorage implant-bone interface loaded with different orthodontic condition].

    Science.gov (United States)

    Jiang, Xiao-hong; Zhang, Yan; Han, Xue; Liu, Ji-hui; Ma, Tian-chi

    2008-12-01

    To study the stability of the microscrew implant anchorage under different loading force and different timing and observe the integration of the implant to the bone. Thirty-six titanium alloy microscrew implants were implanted into three dogs' maxilla and mandible. The implants were divided into two groups: one with immediate implant loading and the other with delayed implant loading. In the delayed loading group, the microscrew implants that were implanted into the right maxilla and mandible were unloaded temporarily. Four weeks later, these dogs, together with the immediate loading group, whose microscrew implants were implanted into the left maxilla and mandible, were loaded at the same time. The mesial screw was unloaded. Two distal screws were loaded with force: 1.96N on the maxilla, and 3.92N on the mandibular. After 12 weeks, the dogs were sacrificed. The specimen were fixed and decalcified. Subsequently, immunohistochemical stain for BMP-2 was employed. The specimen were assessed with image analysis system to analyze the average grey scale. The data were analyzed using Student's t test and one-way ANOVA with SPSS 10.0 software package. BMP-2 staining showed that there was significant difference between the immediate loading group(1.96N,3.92N), delayed loading group(1.96N,3.92N) and non-loading group at average gray value (P0.05). Both the immediate and the delayed implant loading can strengthen the attachment and integration of the implant to the bone. The timing of the loading force has no significant impact on the stabilization of the microscrew implants.

  15. Aluminium chloride promotes anchorage-independent growth in human mammary epithelial cells.

    Science.gov (United States)

    Sappino, André-Pascal; Buser, Raphaële; Lesne, Laurence; Gimelli, Stefania; Béna, Frédérique; Belin, Dominique; Mandriota, Stefano J

    2012-03-01

    Aluminium salts used as antiperspirants have been incriminated as contributing to breast cancer incidence in Western societies. To date, very little or no epidemiological or experimental data confirm or infirm this hypothesis. We report here that in MCF-10A human mammary epithelial cells, a well-established normal human mammary epithelial cell model, long-term exposure to aluminium chloride (AlCl(3) ) concentrations of 10-300 µ m, i.e. up to 100 000-fold lower than those found in antiperspirants, and in the range of those recently measured in the human breast, results in loss of contact inhibition and anchorage-independent growth. These effects were preceded by an increase of DNA synthesis, DNA double strand breaks (DSBs), and senescence in proliferating cultures. AlCl(3) also induced DSBs and senescence in proliferating primary human mammary epithelial cells. In contrast, it had no similar effects on human keratinocytes or fibroblasts, and was not detectably mutagenic in bacteria. MCF-10A cells morphologically transformed by long-term exposure to AlCl(3) display strong upregulation of the p53/p21(Waf1) pathway, a key mediator of growth arrest and senescence. These results suggest that aluminium is not generically mutagenic, but similar to an activated oncogene, it induces proliferation stress, DSBs and senescence in normal mammary epithelial cells; and that long-term exposure to AlCl(3) generates and selects for cells able to bypass p53/p21(Waf1) -mediated cellular senescence. Our observations do not formally identify aluminium as a breast carcinogen, but challenge the safety ascribed to its widespread use in underarm cosmetics. Copyright © 2012 John Wiley & Sons, Ltd.

  16. CALCULATION ASSESSMENT OF ANCHORAGE IN CONCRETE FOR FIBERGLASS REINFORCEMENT MANUFACTURED IN THE REPUBLIC OF BELARUS

    Directory of Open Access Journals (Sweden)

    E. Ya. Sadin

    2016-01-01

    Full Text Available The paper analyzes advantages and disadvantages of composite reinforcement while reinforcing concrete structures. Results of experimental investigations on adhesion strength of fiberglass reinforcement manufactured in the Republic of Belarus with concrete have been given in the paper. The paper contains an analysis pertaining to the influence of concrete contact diameter and length of fiberglass reinforcing bars on strength and deformability of adhesion with concrete. Failure behavior of prototypes and maximum loading that does cause breakage in adhesion of fiberglass reinforcement with the concrete have been controlled in order to study the influence of diameter and length of fiberglass reinforcing bar contact with the concrete on strength and deformability of concrete adhesion for composite reinforcement produced by various manufacturers. Displacement of non-loaded (free and loaded ends of the reinforcing bars with regard to concrete exposed face on both specimen ends has been also controlled. The experiments have shown that destruction of the prototypes occurred due to initiation of one of the following three reasons: reinforcement sliding in reference to concrete, cleaving of a protective concrete layer or breakage of composite reinforcement. Start-up moments for reinforcing bar slip in relation to the concrete have been determined with the help of two methods. The paper provides proposals for calculation assessment of anchorage in the concrete for fiberglass reinforcement manufactured by the following enterprises and companies “Stroykompozit” (Gomel, Republic of Belarus, Research and Production Company (RPC “Biznes-Kontinent” (Brest, Republic of Belarus and Private Eenterprise (PE “Minplast” (Minsk, Republic of Belarus.

  17. Preliminary assessment report for Camp Carroll Training Center, Installation 02045, Anchorage, Alaska. Installation Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    Krokosz, M.; Sefano, J.

    1993-08-01

    This report presents the results of the preliminary assessment (PA) conducted by Argonne National Laboratory at the Alaska Army National Guard property known as Camp Carroll Training Center, located on the Fort Richardson Army facility near Anchorage, Alaska. Preliminary assessments of federal facilities are being conducted to compile the information necessary for the completion of preremedial activities and to provide a basis for establishing, corrective actions in response to releases of hazardous substances. The principal objective of the PA is to characterize the site accurately and determine the need for further action by examining site activities, types and quantities of hazardous substances used, the nature and amounts of wastes generated or stored at the facility, and potential pathways by which contamination could affect public health and the environment. The primary environmentally significant operations (ESOs) associated with the property are (1) the Alaska Air National Guard storage area behind Building S57112 (Organizational Maintenance Shop [OMS] 6); (2) the state of Alaska maintenance facility and the soil/tar-type spill north of the state of Alaska maintenance facility; (3) the waste storage area adjacent to OMS 6; (4) the contaminated area from leaking underground storage tanks (USTs) and the oil-water separator; and (5) soil staining in the parking area at the Camp Carroll Headquarters Building. Camp Carroll appears to be in excellent condition from an environmental standpoint, and current practices are satisfactory. Argonne recommends that the Alaska Department of Military Affairs consider remediation of soil contamination associated with all storage areas, as well as reviewing the practices of other residents of the facility. Argonne also recommends that the current methods of storing waste material behind Building S57112 (OMS 6) be reviewed for alternatives.

  18. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-09-01

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

  19. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

    2017-03-21

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  20. Concentration device

    DEFF Research Database (Denmark)

    2013-01-01

    A concentration device (2) for filter filtration concentration of particles (4) from a volume of a fluid (6). The concentration device (2) comprises a filter (8) configured to filter particles (4) of a predefined size in the volume of the fluid (6). The concentration device (2) comprises...

  1. Three-dimensional dental model analysis of treatment outcomes for protrusive maxillary dentition: comparison of headgear, miniscrew, and miniplate skeletal anchorage.

    Science.gov (United States)

    Lai, Eddie Hsiang-Hua; Yao, Chung-Chen Jane; Chang, Jenny Zwei-Chieng; Chen, I; Chen, Yi-Jane

    2008-11-01

    The aim of this retrospective study on dental models was to compare the orthodontic outcomes of maxillary dentoalveolar protrusion treated with headgear, miniscrews, or miniplates for maximum anchorage. The 40 subjects were diagnosed as having either Angle Class II malocclusion or Class I bimaxillary dentoalveolar protrusion. All patients were treated to retract the maxillary dentoalveolar process by using the extraction space of the bilateral maxillary first premolars. They were divided into 3 groups according to the type of anchorage used. Group 1 (n = 16) received traditional anchorage preparation with a transpalatal arch and headgear, group 2 (n = 15) received miniscrews, and group 3 (n = 9) received miniplates for skeletal anchorage. To investigate the movement of the maxillary teeth during dentoalveolar retraction, we used a 3-dimensional (3D) digitizer to assess the positional changes of the maxillary teeth relative to the stable palatal rugose structures on the serial dental models. The 3D coordinates representing pretreatment and posttreatment maxillary dental casts were superimposed to determine the movement of individual teeth from the positional changes of 18 landmarks of the central incisor, canine, second premolar, and first molar. Three-dimensional analysis of the maxillary dental models in the buccopalatal, anteroposterior, and vertical directions showed significant differences in tooth movements between the headgear and the mini-implant (miniscrew or miniplate) groups. Both skeletal anchorage groups had greater incisor retraction (6.9 mm for the miniscrew, 7.3 mm for the miniplate) than did the headgear group (5.5 mm). Mesialization of occlusal centroid of the maxillary molar in the skeletal anchorage groups was less than that in the headgear group (1.3 mm for the miniscrew, 1.4 mm for the miniplate, 2.5 mm for the headgear). Tooth movements in the anteroposterior and buccopalatal directions did not reach a statistically significant difference

  2. Temporary jobs and the severity of workplace accidents.

    Science.gov (United States)

    Picchio, Matteo; van Ours, Jan C

    2017-06-01

    From the point of view of workplace safety, it is important to know whether having a temporary job has an effect on the severity of workplace accidents. We present an empirical analysis on the severity of workplace accidents by type of contract. We used microdata collected by the Italian national institute managing the mandatory insurance against work related accidents. We estimated linear models for a measure of the severity of the workplace accident. We controlled for time-invariant fixed effects at worker and firm levels to disentangle the impact of the type of contract from the spurious one induced by unobservables at worker and firm levels. Workers with a temporary contract, if subject to a workplace accident, were more likely to be confronted with severe injuries than permanent workers. When correcting the statistical analysis for injury under-reporting of temporary workers, we found that most of, but not all, the effect is driven by the under-reporting bias. The effect of temporary contracts on the injury severity survived the inclusion of worker and firm fixed effects and the correction for temporary workers' injury under-reporting. This, however, does not exclude the possibility that, within firms, the nature of the work may vary between different categories of workers. For example, temporary workers might be more likely to be assigned dangerous tasks because they might have less bargaining power. The findings will help in designing public policy effective in increasing temporary workers' safety at work and limiting their injury under-reporting. Copyright © 2017. Published by Elsevier Ltd.

  3. Treatment effects of a modified palatal anchorage plate for distalization evaluated with cone-beam computed tomography.

    Science.gov (United States)

    Kook, Yoon-Ah; Bayome, Mohamed; Trang, Vu Thi Thu; Kim, Hye-Jin; Park, Jae Hyun; Kim, Ki Beom; Behrents, Rolf G

    2014-07-01

    The purpose of this study was to evaluate the treatment effects of maxillary posterior tooth distalization performed by a modified palatal anchorage plate appliance with cephalograms derived from cone-beam computed tomography. The sample consisted of 40 lateral cephalograms obtained from the cone-beam computed tomography images of 20 Class II patients (7 men, 13 women; average age, 22.9 years) who underwent bilateral distalization of their maxillary dentition. The lateral cephalograms were derived from the cone-beam computed tomography images taken immediately before placement of a modified palatal anchorage plate appliance and at the end of distalization. Paired t tests were used for comparisons of the changes. The distal movement of the maxillary first molar was 3.3 ± 1.8 mm, with distal tipping of 3.4° ± 5.8° and intrusion of 1.8 ± 1.4 mm. Moreover, the maxillary incisors moved 3.0 ± 2.7 mm lingually, with lingual tipping of 6.2° ± 7.6° and insignificant extrusion (1.1 mm; P = 0.06). The occlusal plane angle was increased significantly (P = 0.0001). The maxillary first molar was distalized by 3.3 mm at the crown and 2.2 mm at root levels, with distal tipping of 3.4°. It is recommended that clinicians should consider using the modified palatal anchorage plate appliance in treatment planning for patients who require maxillary total arch distalization. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  4. Moving Toward a Globally Harmonized Volcanic Ash Forecast System: Anchorage and Tokyo VAAC Best Practices on Collaboration

    Science.gov (United States)

    Osiensky, J. M.; Moore, D.; Igarashi, Y.

    2014-12-01

    Since the eruption of Eyjafjallajökull in 2010, there has been an increased awareness on the need for better collaboration between the Volcanic Ash Advisory Centers (VAACs). Work through the International Civil Aviation Organization (ICAO) International Airways Volcano Watch Operations Group (IAVWOPSG) and International Airways Volcano Task Force (IAVTF) brought increased awareness and focus to this challenge. A VAAC Best Practices group was formed out of these larger meetings and focused on VAAC specific issues of importance. Collaboration was one of the topics under consideration. Some ideas and procedures for an effective, yet easy, method for the VAACs to collaborate have been discussed. Implementation has been mainly on a VAAC to VAAC basis, however a more consolidated process needs to be developed and agreed upon between all VAACs in order to successfully move toward harmonization. Collaboration procedures and tools are being considered. The National Weather Service (NWS) Alaska Region has been looking at collaborative software to help the VAACs identify the presence of ash and forecast the plume both in the horizontal and vertical. Having an interactive graphical interface within the forecast operation may help to ensure consistency across VAAC boundaries. Existing chat software within NWS is being investigated to allow Tokyo and Anchorage VAAC to "chat" about forecast issues in real time. This capability is being tested through scenarios. The Anchorage and Tokyo VAACs participated in a series of meetings in Tokyo in March 2014. Collaboration was a major topic of discussion. This paper will outline some of the efforts being undertaken between the Anchorage and Tokyo VAACs as a result of these meetings and subsequent dialogue.

  5. Spheroid Culture of Head and Neck Cancer Cells Reveals an Important Role of EGFR Signalling in Anchorage Independent Survival.

    Science.gov (United States)

    Braunholz, Diana; Saki, Mohammad; Niehr, Franziska; Öztürk, Merve; Borràs Puértolas, Berta; Konschak, Robert; Budach, Volker; Tinhofer, Ingeborg

    2016-01-01

    In solid tumours millions of cells are shed into the blood circulation each day. Only a subset of these circulating tumour cells (CTCs) survive, many of them presumable because of their potential to form multi-cellular clusters also named spheroids. Tumour cells within these spheroids are protected from anoikis, which allows them to metastasize to distant organs or re-seed at the primary site. We used spheroid cultures of head and neck squamous cell carcinoma (HNSCC) cell lines as a model for such CTC clusters for determining the role of the epidermal growth factor receptor (EGFR) in cluster formation ability and cell survival after detachment from the extra-cellular matrix. The HNSCC cell lines FaDu, SCC-9 and UT-SCC-9 (UT-SCC-9P) as well as its cetuximab (CTX)-resistant sub-clone (UT-SCC-9R) were forced to grow in an anchorage-independent manner by coating culture dishes with the anti-adhesive polymer poly-2-hydroxyethylmethacrylate (poly-HEMA). The extent of apoptosis, clonogenic survival and EGFR signalling under such culture conditions was evaluated. The potential of spheroid formation in suspension culture was found to be positively correlated with the proliferation rate of HNSCC cell lines as well as their basal EGFR expression levels. CTX and gefitinib blocked, whereas the addition of EGFR ligands promoted anchorage-independent cell survival and spheroid formation. Increased spheroid formation and growth were associated with persistent activation of EGFR and its downstream signalling component (MAPK/ERK). Importantly, HNSCC cells derived from spheroid cultures retained their clonogenic potential in the absence of cell-matrix contact. Addition of CTX under these conditions strongly inhibited colony formation in CTX-sensitive cell lines but not their resistant subclones. Altogether, EGFR activation was identified as crucial factor for anchorage-independent survival of HNSCC cells. Targeting EGFR in CTC cluster formation might represent an attractive anti

  6. Temporary henna tattoo is unsafe in atopic children.

    Science.gov (United States)

    Corrente, Stefania; Moschese, Viviana; Chianca, Marco; Graziani, Simona; Iannini, Roberta; La Rocca, Maria; Chini, Loredana

    2007-03-01

    Temporary henna tattoos have become increasingly popular as a safe alternative to permanent tattoos among American and European children and teenagers during the summer holidays. Currently, temporary henna tattoos contain not only henna, but also other additives such as para-phemylenediamine (PPD), which is considered to be the chemical agent that most frequently causes skin reactions associated with the use of commercial black henna. In this report, we describe an 11-year-old boy who applied a temporary black henna tattoo on his right arm during the summer holidays in Greece and developed a severe contact dermatitis at the tattoo site with residual hypopigmentation. He had no previous history of contact dermatitis, however he did suffer from seasonal allergic rhinitis and atopic dermatitis. Patch testing revealed a strong reaction to PPD, a substance commonly contained in temporary henna tattoo preparations. Henna tattoos are an increasing problem worldwide since they carry an increased risk of severe skin reactions; therefore we suggest that the use of temporary henna tattoos in children be discouraged.

  7. Sheath hemorrhage after percutaneous ventricular assist device implantation.

    Science.gov (United States)

    Siddiqi, Saadi; Ganga, Harsha V; Dhesi, Pavittarpaul; Azemi, Talhat; Chamakura, Sanjayant; Kiernan, Francis J; Hammond, Jonathan A; Sadiq, Immad R

    2014-04-01

    Technical advances in temporary ventricular assist devices (VADs) continue to progress, allowing for percutaneous implantation during times of hemodynamic instability. However, device delivery systems, i.e., sheaths, lag in their ability to sustain the mechanical demands of these VADs for extended periods. We propose both a novel technique and the implementation of an emergency preparedness plan to be enacted specifically during those times when delivery systems fail thereby leading to potentially catastrophic bleeding complications.

  8. Testing Electronic Devices for Single-Event Upset

    Science.gov (United States)

    Nichols, D. K.; Price, W. E.; Malone, C. J.

    1986-01-01

    Report prepared describes equipment and summarizes both pretest and onsite procedures for testing of digital electronic devices for susceptibility to single-event upset. Term "single-event upset" denotes variety of temporary or permanent bit flips or latchup induced by single particles of ionizing radiation. Vacuum chamber houses device under test while exposed to ion beam. Vacuum chamber and associated equipment must be brought to ion-beam facility for test.

  9. Combined maxillary and mandibular midline and mandibular ramus distraction osteogenesis for treatment of a Class II patient with implants as orthodontic anchorage.

    Science.gov (United States)

    Takahashi, Ichiro; Kawamura, Hiroshi; Takano-Yamamoto, Teruko

    2010-03-01

    This case report describes the treatment of a woman with severe mandibular retrusion and maxillomandibular transverse deficiency. Her malocclusion was characterized by a large overjet, a deep overbite, and a V-shaped dental arch, and she had a skeletal Class II profile. Treatement included combined maxillary and mandibular midline expansion, maxillary downward repositioning, and mandibular ramus lengthening with distraction osteogenesis with implants as orthodontic anchorage. During the postdistraction orthodontic treatment period, some skeletal relapse occurred. Implants provided absolute orthodontic anchorage to overcome the unexpected skeletal changes. Combined orthodontic treatment with implants for anchorage and distraction osteogenesis successfully expanded the maxilla and the mandible and corrected the mandibular deficiency. Two-year follow-up records show a morphologically and functionally stable result. 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  10. Temporary Cementitious Sealers in Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sugama T.; Pyatina, T.; Butcher, T.; Brothers, L.; Bour, D.

    2011-12-31

    Unlike conventional hydrothennal geothermal technology that utilizes hot water as the energy conversion resources tapped from natural hydrothermal reservoir located at {approx}10 km below the ground surface, Enhanced Geothermal System (EGS) must create a hydrothermal reservoir in a hot rock stratum at temperatures {ge}200 C, present in {approx}5 km deep underground by employing hydraulic fracturing. This is the process of initiating and propagating a fracture as well as opening pre-existing fractures in a rock layer. In this operation, a considerable attention is paid to the pre-existing fractures and pressure-generated ones made in the underground foundation during drilling and logging. These fractures in terms of lost circulation zones often cause the wastage of a substantial amount of the circulated water-based drilling fluid or mud. Thus, such lost circulation zones must be plugged by sealing materials, so that the drilling operation can resume and continue. Next, one important consideration is the fact that the sealers must be disintegrated by highly pressured water to reopen the plugged fractures and to promote the propagation of reopened fractures. In response to this need, the objective of this phase I project in FYs 2009-2011 was to develop temporary cementitious fracture sealing materials possessing self-degradable properties generating when {ge} 200 C-heated scalers came in contact with water. At BNL, we formulated two types of non-Portland cementitious systems using inexpensive industrial by-products with pozzolanic properties, such as granulated blast-furnace slag from the steel industries, and fly ashes from coal-combustion power plants. These byproducts were activated by sodium silicate to initiate their pozzolanic reactions, and to create a cemetitious structure. One developed system was sodium silicate alkali-activated slag/Class C fly ash (AASC); the other was sodium silicate alkali-activated slag/Class F fly ash (AASF) as the binder of temper

  11. Three-dimensional printing spiders: back-and-forth glue application yields silk anchorages with high pull-off resistance under varying loading situations.

    Science.gov (United States)

    Wolff, Jonas O; Herberstein, Marie E

    2017-02-01

    The anchorage of structures is a crucial element of construction, both for humans and animals. Spiders use adhesive plaques to attach silk threads to substrates. Both biological and artificial adhesive structures usually have an optimal loading angle, and are prone to varying loading situations. Silk anchorages, however, must cope with loading in highly variable directions. Here we show that the detachment forces of thread anchorages of orb-web spiders are highly robust against pulling in different directions. This is gained by a two-step back-and-forth spinning pattern during the rapid production of the adhesive plaque, which shifts the thread insertion point towards the plaque centre and forms a flexible tree root-like network of branching fibres around the loading point. Using a morphometric approach and a tape-and-thread model we show that neither area, nor width of the plaque, but the shift of the loading point towards the plaque centre has the highest effect on pull-off resistance. This is explained by a circular propagation of the delamination crack with a low peeling angle. We further show that silken attachment discs are highly directional and adjusted to provide maximal performance in the upstream dragline. These results show that the way the glue is applied, crucially enhances the toughness of the anchorage without the need of additional material intake. This work is a starting point to study the evolution of tough and universal thread anchorages among spiders, and to develop bioinspired 'instant' anchorages of thread- and cable-like structures to a broad bandwidth of substrates. © 2017 The Author(s).

  12. Transforming knowledge across domains in the temporary development spaces

    DEFF Research Database (Denmark)

    Brønnum, Louise

    This paper addresses transformation of knowledge across different knowledge domains and competencies in the Front End of Innovation (FEI) [Koen 2002].We examine the temporary spaces [Clausen, Yoshinaka 2007] that emerge when different knowledge domains are brought into play (implicit or explicit......) in staging innovative concept development. FEI appears as temporary spaces for innovative processes; and studies have pointed out the limited uptake of user knowledge (Elgaard Jensen 2012). This paper will discuss the possibilities and barriers for uptake of user knowledge in FEI in relation...... to the constitutions of these temporary spaces. There seems to be a limited understanding of: how knowledge is transferred and transformed into design objects facilitating a process where knowledge enables innovative thinking across knowledge boundaries. The paper is based on empirical data primarily from case studies...

  13. Temporary sharing prompts unrestrained disclosures that leave lasting negative impressions.

    Science.gov (United States)

    Hofstetter, Reto; Rüppell, Roland; John, Leslie K

    2017-11-07

    With the advent of social media, the impressions people make on others are based increasingly on their digital disclosures. However, digital disclosures can come back to haunt, making it challenging for people to manage the impressions they make. In field and online experiments in which participants take, share, and evaluate self-photographs ("selfies"), we show that, paradoxically, these challenges can be exacerbated by temporary-sharing media-technologies that prevent content from being stored permanently. Relative to permanent sharing, temporary sharing affects both whether and what people reveal. Specifically, temporary sharing increases compliance with the request to take a selfie (study 1) and induces greater disclosure risks (i.e., people exhibit greater disinhibition in their selfies, studies 1 and 2). This increased disclosure is driven by reduced privacy concerns (study 2). However, observers' impressions of sharers are insensitive to permanence (i.e., whether the selfie was shared temporarily versus permanently) and are instead driven by the disinhibition exhibited in the selfie (studies 4-7). As a result, induced by the promise of temporary sharing, sharers of uninhibited selfies come across as having worse judgment than those who share relatively discreet selfies (studies 1, 2, and 4-7)-an attributional pattern that is unanticipated by sharers (study 3), that persists days after the selfie has disappeared (study 5), is robust to personal experience with temporary sharing (studies 6A and 6B), and holds even among friends (studies 7A and 7B). Temporary sharing may bring back forgetting, but not without introducing new (self-presentational) challenges. Copyright © 2017 the Author(s). Published by PNAS.

  14. Deploying temporary networks for upscaling of sparse network stations

    Science.gov (United States)

    Coopersmith, Evan J.; Cosh, Michael H.; Bell, Jesse E.; Kelly, Victoria; Hall, Mark; Palecki, Michael A.; Temimi, Marouane

    2016-10-01

    Soil observations networks at the national scale play an integral role in hydrologic modeling, drought assessment, agricultural decision support, and our ability to understand climate change. Understanding soil moisture variability is necessary to apply these measurements to model calibration, business and consumer applications, or even human health issues. The installation of soil moisture sensors as sparse, national networks is necessitated by limited financial resources. However, this results in the incomplete sampling of the local heterogeneity of soil type, vegetation cover, topography, and the fine spatial distribution of precipitation events. To this end, temporary networks can be installed in the areas surrounding a permanent installation within a sparse network. The temporary networks deployed in this study provide a more representative average at the 3 km and 9 km scales, localized about the permanent gauge. The value of such temporary networks is demonstrated at test sites in Millbrook, New York and Crossville, Tennessee. The capacity of a single U.S. Climate Reference Network (USCRN) sensor set to approximate the average of a temporary network at the 3 km and 9 km scales using a simple linear scaling function is tested. The capacity of a temporary network to provide reliable estimates with diminishing numbers of sensors, the temporal stability of those networks, and ultimately, the relationship of the variability of those networks to soil moisture conditions at the permanent sensor are investigated. In this manner, this work demonstrates the single-season installation of a temporary network as a mechanism to characterize the soil moisture variability at a permanent gauge within a sparse network.

  15. Distalização de segundo molar inferior impactado através da utilização de ancoragem esquelética com miniplaca: relato de caso Distalization of impacted mandibular second molar using miniplates for skeletal anchorage: case report

    Directory of Open Access Journals (Sweden)

    Belini Freire-Maia

    2011-08-01

    Full Text Available O presente estudo consiste no relato de um caso onde a distalização do segundo molar inferior impactado do lado direito foi obtida através da ancoragem esquelética com o uso de miniplaca. A verticalização dos segundos molares inferiores impactados, durante muito tempo, colocou-se como um grande desafio para ortodontistas e cirurgiões bucais devido à escassez de recursos de ancoragem destinados para esse fim. A utilização da ancoragem esquelética foi iniciada na clínica ortodôntica em meados dos anos 80 e, desde então, diversas modalidades têm sido desenvolvidas para esse princípio, como a utilização de mini-implantes, implantes dentários e, finalmente, miniplacas, que foram testadas e apresentaram resultados animadores. O assunto é relevante para ortodontistas e cirurgiões bucais, uma vez que o uso das miniplacas pode influir de forma significativa no tratamento de molares inferiores impactados.This study describes a case with an impacted right mandibular second molar which was distalized using miniplates for skeletal anchorage. Uprighting impacted mandibular second molars has been a great challenge for orthodontists and oral surgeons because of the scarcity of anchorage options. Skeletal anchorage was first used in clinical orthodontics in the middle of the 1980s. Since then, several devices have been developed for that purpose, such as mini-screws, tooth implants and, lately, miniplates, which have been tested and showed encouraging results. This topic is relevant for orthodontists and oral surgeons because the use of miniplates may significantly change the treatment of impacted mandibular molars.

  16. [Temporary hearing threshold shift in policemen after firearm training].

    Science.gov (United States)

    Cassano, F; Montesano, Roberta; Bobbio, Elena; Borraccia, V; Volpe, C; Bavaro, P; Quaranta, N

    2012-01-01

    The paper involves exposure to noise of the State Police officers connected with the use of firearms. The noise generated by these weapons is of short duration and high intensity. The research was carried out during the sessions of firearm training of State Police officers to assess exposure to noise. The values of the various investigations, both audiometric and phonometric, carried out made it possible to demonstrate a significant exposure and a temporary increase in the threshold, above the frequency of 6000 Hz. Even taking account of the abatement from use of headphones, an exposure was demonstrated that was above the statutory limits, as was confirmed by the temporary hearing threshold shift.

  17. [Development and research of temporary demand pacemaker with electrocardiosignal display].

    Science.gov (United States)

    Fan, Shounian; Jiang, Chenxi; Cai, Yunchang; Pan, Yangzhong; Yang, Tianhe; Wu, Qiang; Zheng, Yaxi; Liu, Xiaoqiao; Li, Shiying

    2004-08-01

    A temporary demand pacemaker with electrocardiosignal display is introduced in this paper. Double way low-noise electrocardiosignal preamplifier, amplitude limiter, high and low pass filter, 50 Hz notch filter, TTL level generator and stimulating pulse formation circuit are components of the hardware electrocircuit. The demand pacing and the electrocardiosignal display are separately controlled by the software in which the double microcontrollers communications technique is used. In this study, liquid crystal display is firstly used in body surface electrocardiosignal display or intracardial electrophysiologic signal display when the temporary demand pacemaker is installed and put into use. The machine has proven clinically useful and can be of wide appliation.

  18. Demand for temporary agency nurses and nursing shortages.

    Science.gov (United States)

    Seo, Sukyong; Spetz, Joanne

    2013-08-01

    There is an ongoing debate about the reasons for the growth of temporary employment of registered nurses (RNs). Some argue that efficiency incentives to increase flexibility and reduce labor costs are the principal cause, while others point to shortages of RNs as the stronger determinant. Using hospital-level data from California's Office of Statewide Health Planning and Development, we find a significant trend of increasing demand for agency nurses during the years of RN shortage. Demand rose with inpatient days, patient demand fluctuation, and the level of fringe benefits. Competition between hospitals and unionization, however, did not affect hospitals' demand for temporary RNs. © The Author(s) 2014.

  19. Event-related temporary collocations in modern english newspaperdiscourse

    Directory of Open Access Journals (Sweden)

    Е В Терехова

    2010-06-01

    Full Text Available The paper discusses collocations called by the author as «temporary collocations». The temporary collocations (TC under discussion are understood as expressions with one marked component, being peripheral to the mainstream of idioms and phrasal expressions, which enables us to treat the analyzed TC in a narrow slightly idiomatic meaning. Quite a few examples borrowed from the authentic English newspapers and magazines are used to demonstrate the relationship between the event and the emergence of the TC; also the discourse definition is provided with a focus on interdependence between the TC and the discourse.

  20. A Case of Localized Hypertrichosis Due to Temporary Henna Tattoo

    Directory of Open Access Journals (Sweden)

    Deren Özcan

    2014-09-01

    Full Text Available Temporary henna tattoos have become very popular among children and teenagers in recent years. However, the use of additives to shorten the application time and darken the color of commercial henna, such as para-phenylenediamine, has led to an increased risk of complications due to those tattoos. The most commonly seen complications are allergic contact dermatitis, hypertrophic scarring, keloid formation, hyperpigmentation, and hypopigmentation. Herein; a 13-year-old girl who developed localized hypertrichosis after a temporary henna tattoo application was presented.

  1. Temporary emergency pacing-an orphan in district hospitals

    DEFF Research Database (Denmark)

    Gjesdal, Knut; Johansen, Jens Brock; Gadler, Fredrik

    2012-01-01

    This editorial discusses a report on the 1 year experience with temporary pacing, especially in the emergency setting, in several Norwegian district hospitals. The vast majority of the patients received transvenous temporary pacing, and the majority of leads were placed by noncardiologists....... The procedure times were long and complications were frequent. The organization of emergency pacing is discussed, and we suggest that unless qualified physicians can establish transvenous pacing, the patients who need that should be transferred with transcutaneous pacing as back-up during transport...

  2. Exits from Temporary Jobs in Europe: A Competing Risks Analysis

    DEFF Research Database (Denmark)

    D'Addio, Anna Christina; Rosholm, Michael

    2005-01-01

    We study transitions out of temporary jobs using the waves 1994-1999 of the European Community Household Panel applying a discrete time duration model. Specifically, we use a multinomial logitmodel distinguishing between exits into permanent employment and non-employment. Two different specificat......We study transitions out of temporary jobs using the waves 1994-1999 of the European Community Household Panel applying a discrete time duration model. Specifically, we use a multinomial logitmodel distinguishing between exits into permanent employment and non-employment. Two different...

  3. Multiple Institutional Logics in Inter-Institutional Temporary Organizations

    DEFF Research Database (Denmark)

    Pemsel, Sofia; Söderlund, Jonas

    distinct response strategies the project actors relied upon to deal with the multiplicity of logics: total integration, partial decoupling, avoidance, and surfing. We discuss how these response strategies were used, in what situations, and what effects they had on the organization. The paper contributes......The idea of multiple institutional logics currently draws more and more attention as many organizational actors are forced to operate in ever more complex, temporary and vivid collaborations. We draw on findings from a unique case study of a temporary organization that carried the responsibility...

  4. Survey of absence. The use of photographic data for the survey of temporary art exhibitions.

    Directory of Open Access Journals (Sweden)

    Matteo Ballarin

    2013-10-01

    Full Text Available Modern Art Exhibitions succeeded in conveying long-lasting ideas and meanings despite their ephemeral nature. Art history and Museum studies recently started to focus on the Exhibition as a medium, requiring precise graphic reconstructions of exhibit designs for critical and theoretical purposes. Exhibitions were rarely designed through graphic devices such as the project; they were usually a result of improvisation processes. In this sense, photographs are the only documents for graphic reconstructions of temporary art spaces. Nevertheless, the photographic datum has been over-edited in its span of life for more than one reason: it requires a critical approach to be used as a source. The use of digital tools for photography can lead to satisfactory results when applied to humanities.

  5. Simple Device for Treating Prolapsing Loop Colostomy

    Directory of Open Access Journals (Sweden)

    Ming-Yu Hsieh

    2006-03-01

    Full Text Available Stoma prolapse is a common complication of intestinal stoma. Although various surgical methods yield satisfactory results, nonsurgical treatment may be better for a temporary stoma. We report a case of a patient with a distal limb prolapse of a right transverse colostomy who received nonsurgical treatment with satisfactory results. For the treatment of a temporary transverse loop colostomy with distal limb prolapse, we designed a simple device consisting of a pediatric plastic medicine cup, which was rolled into a towel to shape the bottom of the cup into a compressor. The towel was put on the stoma outside of the colostomy bag with the compressor above the prolapsing limb of the colostomy. An abdominal binder was applied to fix the towel.

  6. The Liminality of Temporary Agency Work: Exploring the Dimensions of Danish Temporary Agency Workers’ Liminal Experience

    Directory of Open Access Journals (Sweden)

    Ingo Winkler

    2015-03-01

    Full Text Available The concept of liminality refers to the experience to be betwixt-and-between social structures and the associated positions, statuses, and roles. We advance the original use of the concept by introducing the various meanings that the experience of being in a liminal state can take. Drawing on political anthropology we identify the dimensions of ‘types of subjects,’ ‘time,’ ‘space,’ and ‘scale’ in order to analytically unlock the liminal experience. Exemplifying our concept we present the findings from an own study of temporary agency workers in Denmark. Exploring the workers’ interpretations allows us to illustrate to what extent their employment situation constitutes a multi-dimensional liminal experience between established social structures and employment categories. The article emphasizes the complexity of the liminal experience. Theoretically and empirically, we show the many meanings along which liminality can unfold in organizational and work-related contexts. We argue that future studies should explore the various dimensions in other contexts of passages from one relatively stable state to another. In doing so, similarities and differences between various liminal experiences and the role the various dimensions play could be identified.

  7. 47 CFR 90.159 - Temporary and conditional permits.

    Science.gov (United States)

    2010-10-01

    ... SERVICES PRIVATE LAND MOBILE RADIO SERVICES Applications and Authorizations § 90.159 Temporary and... minimum of ten business days has passed between submission of the application to the Commission and the... MHz (subpart T), Business Radio (subpart D), 929-930 MHz Paging (subpart P), and Specialized Mobile...

  8. Temporary and long-term consequences of bereavement on happiness

    NARCIS (Netherlands)

    Moor, J.A.; de Graaf, P.M.

    In this article, we examine the temporary and long-term consequences of the death of a parent or child on happiness. According to set-point theory external conditions are expected to only have a short-term or limited influence on happiness. This directly contradicts the basic assumption of affective

  9. The terrestrial invertebrate fauna of a temporary stream in southern ...

    African Journals Online (AJOL)

    The terrestrial invertebrate fauna of an intermittent stream was examined in the absence of surface flows within the context of the flood pulse concept. ... The concept of the flood pulse should be expanded to include aseasonal and secular variations in flow which in temporary streams create lateral movements that provide ...

  10. 18 CFR 2.57 - Temporary certificates-pipeline companies.

    Science.gov (United States)

    2010-04-01

    ...-pipeline companies. 2.57 Section 2.57 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... Policy and Interpretations Under the Natural Gas Act § 2.57 Temporary certificates—pipeline companies... the proposed construction is of major proportions. Pipeline companies are accordingly urged to conduct...

  11. Genre-related temporary collocations in english discourse

    Directory of Open Access Journals (Sweden)

    Е В Терехова

    2009-09-01

    Full Text Available The paper discusses genre-related temporary collocations (TC. It also provides genre definition, analyzes different genre-related TC which are used in TV speeches, diplomatic texts, and English media texts. TC implementing in genre-related texts, preferential reinterpretation criteria which characterize terminology formation, their interpretation, and their translation from English into Russian is considered.

  12. Temporary Jobs and the Severity of Workplace Accidents

    NARCIS (Netherlands)

    Picchio, Matteo; van Ours, Jan

    2016-01-01

    From the point of view of workplace safety, it is important to know whether having a temporary job has an effect on the severity of workplace accidents. We present an empirical analysis on the severity of workplace accidents by type of contract. Method: We used micro data collected by the Italian

  13. Evolution of a Biosynthetic Temporary Skin Substitute: A Preliminary Study.

    Science.gov (United States)

    Woodroof, Aubrey; Phipps, Richard; Woeller, Collynn; Rodeheaver, George; Naughton, Gail K; Piney, Emmett; Hickerson, William; Branski, Ludwik; Holmes, James H

    2015-01-01

    To compare PermeaDerm to first temporary biosynthetic skin substitute (Biobrane, cleared by the Food and Drug Administration in 1979). Different temporary skin substitutes (Biobrane, PermeaDerm, and PermeaDerm derivatives) were tested for physical differences, impact on healing wounds, inflammatory response, and ability to allow adequate growth of dermal fibroblasts and mesenchymal stem cells without accumulation of excessive scar-forming myofibroblasts. Proliferation of fibroblasts and stem cells on various skin substitutes was measured, and myofibroblast marker accumulation was evaluated by the expression of α-smooth muscle actin and fibronectin. Fibroblast migration was measured by tracking viable cells with MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] dye. In vivo testing shows PermeaDerm works well as a temporary skin substitute, performing better than Biobrane with respect to inflammation and fluid accumulation. Tissue culture techniques revealed that cells on PermeaDerm grow in a more uniform fashion and migrated to a greater extent than cells on Biobrane. Furthermore, cells grown in the presence of PermeaDerm expressed lower levels of the myofibroblast markers α-smooth muscle actin and fibronectin than cells grown on Biobrane. PermeaDerm with variable porosity possesses all attributes and properties known to be important for a successful temporary skin substitute and enables the clinician to control porosity from essentially zero to what the wound requires. The ability of the clinician to minimize wound desiccation without fluid accumulation is related to the reduction of punctate scarring.

  14. 17 CFR 232.201 - Temporary hardship exemption.

    Science.gov (United States)

    2010-04-01

    ... no later than one business day after the date on which the filing was to be made. (1) An electronic... submitted to the Commission within six business days of filing the paper format document. The electronic... REGULATION S-T-GENERAL RULES AND REGULATIONS FOR ELECTRONIC FILINGS Hardship Exemptions § 232.201 Temporary...

  15. 76 FR 35909 - Temporary Concession Contract for Blue Ridge Parkway

    Science.gov (United States)

    2011-06-20

    ... lodging accommodations, food and beverage, retail sales, boat rentals, and other services at Crabtree... Doc No: 2011-15060] DEPARTMENT OF THE INTERIOR National Park Service [NPS-WASO-CONC-0511-7182; 2410-OYC] Temporary Concession Contract for Blue Ridge Parkway AGENCY: National Park Service, Interior...

  16. Performance of yam microtubers from temporary immersion system ...

    African Journals Online (AJOL)

    The yam clones ´Pacala Duclos´ and ´Belep´ of Dioscorea alata were used to evaluate the performance of microtubers formed in temporary immersion systems (TIS) in field conditions. Previously sprouted microtubers with a fresh weight higher than 3.0 gFW were used while in vitro plants and tuber crowns from conventional ...

  17. Performance of yam microtubers from temporary immersion system ...

    African Journals Online (AJOL)

    Jane

    2011-08-22

    Aug 22, 2011 ... as research tools: a review. Am. J. Potato Res. 78: 47-55. Escalona M (2006) Temporary inmersion beats traditional techniques on all fronts. Prophyta annual. pp. 48-50. Hernandez A, Perez JM, Bosh D, Rivero L, Camacho E (1999) Nueva versión de clasificación de los suelos de Cuba. Instituto de Suelos.

  18. 19 CFR 146.33 - Temporary deposit for manipulation.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Temporary deposit for manipulation. 146.33 Section 146.33 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... deposit for manipulation. Imported merchandise for which an entry has been made and which has remained in...

  19. Understanding the development of temporary agency work in Europe

    NARCIS (Netherlands)

    B.A.S. Koene (Bas); J. Paauwe (Jaap); J.P.M. Groenewegen (John)

    2004-01-01

    textabstractThis article develops an explanatory framework for understanding the growth and development of temporary agency work (TAW) and the related industry. The analysis shows that explanations based on economic logic are helpful in understanding the choice of TAW in general. These explanations,

  20. Distribution, Density and Diversity of Dipterans in a Temporary Pond ...

    African Journals Online (AJOL)

    Some aspects of the ecology of Diptera were studied in a temporary pond in Okomu Forest Reserve, southern Nigeria between January 1988 and December 1989. Twenty six morphologically distinct taxa were identified, of which 14 were chironomids. The dominant taxa were Polypedilum (43%), Alluaudomyia (21%), Culex ...

  1. Training "Expendable" Workers: Temporary Foreign Workers in Nursing

    Science.gov (United States)

    Taylor, Alison; Foster, Jason; Cambre, Carolina

    2012-01-01

    The purpose of this article is to explore the experiences of Temporary Foreign Workers in health care in Alberta, Canada. In 2007-2008, one of the regional health authorities in the province responded to a shortage of workers by recruiting 510 health-care workers internationally; most were trained as Registered Nurses (RNs) in the Philippines.…

  2. 41 CFR 101-1.103 - FPMR temporary regulations.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true FPMR temporary regulations. 101-1.103 Section 101-1.103 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 1-INTRODUCTION 1.1-Regulation System § 101...

  3. Temporary Anorgasmia Following Uterine Artery Embolization for Symptomatic Uterine Fibroids.

    Science.gov (United States)

    Speir, Ethan; Shekhani, Haris; Peters, Gail

    2017-11-01

    We report a rare case of temporary anorgasmia following uterine artery embolization (UAE) performed for symptomatic uterine fibroids. To our knowledge, this is only the second time that this complication has been reported in the literature. We briefly explore the possible pathophysiologic explanations for this complication and review the effects of UAE compared to hysterectomy on sexual functioning in women.

  4. Difficulty Processing Temporary Syntactic Ambiguities in Lewy Body Spectrum Disorder

    Science.gov (United States)

    Grossman, Murray; Gross, Rachel G.; Moore, Peachie; Dreyfuss, Michael; McMillan, Corey T.; Cook, Philip A.; Ash, Sherry; Siderowf, Andrew

    2012-01-01

    While grammatical aspects of language are preserved, executive deficits are prominent in Lewy body spectrum disorder (LBSD), including Parkinson's disease (PD), Parkinson's dementia (PDD) and dementia with Lewy bodies (DLB). We examined executive control during sentence processing in LBSD by assessing temporary structural ambiguities. Using an…

  5. 47 CFR 78.33 - Special temporary authority.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Special temporary authority. 78.33 Section 78.33 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES CABLE... with § 78.18: Provided, however, That in the case of events of widespread interest and importance that...

  6. 76 FR 68192 - Temporary Certification Program; Notice of Extension

    Science.gov (United States)

    2011-11-03

    ... of Certified EHR Technology for EPs and hospitals that seek to achieve meaningful use and participate... Extension AGENCY: Office of the National Coordinator for Health Information Technology, HHS. ACTION: Notice... Technology (the National Coordinator) to extend the Temporary Certification Program. Authority: Section 3001...

  7. Water-Quality Conditions of Chester Creek, Anchorage, Alaska, 1998-2001

    Science.gov (United States)

    Glass, Roy L.; Ourso, Robert T.

    2006-01-01

    Between October 1998 and September 2001, the U.S. Geological Survey's National Water-Quality Assessment Program evaluated the water-quality conditions of Chester Creek, a stream draining forest and urban settings in Anchorage, Alaska. Data collection included water, streambed sediments, lakebed sediments, and aquatic organisms samples from urban sites along the stream. Urban land use ranged from less than 1 percent of the basin above the furthest upstream site to 46 percent above the most downstream site. Findings suggest that water quality of Chester Creek declines in the downstream direction and as urbanization in the watershed increases. Water samples were collected monthly and during storms at a site near the stream's mouth (Chester Creek at Arctic Boulevard) and analyzed for major ions and nutrients. Water samples collected during water year 1999 were analyzed for selected pesticides and volatile organic compounds. Concentrations of fecal-indicator bacteria were determined monthly during calendar year 2000. During winter, spring, and summer, four water samples were collected at a site upstream of urban development (South Branch of South Fork Chester Creek at Tank Trail) and five from an intermediate site (South Branch of South Fork Chester Creek at Boniface Parkway). Concentrations of calcium, magnesium, sodium, chloride, and sulfate in water increased in the downstream direction. Nitrate concentrations were similar at the three sites and all were less than the drinking-water standard. About one-quarter of the samples from the Arctic Boulevard site had concentrations of phosphorus that exceeded the U.S. Environmental Protection Agency (USEPA) guideline for preventing nuisance plant growth. Water samples collected at the Arctic Boulevard site contained concentrations of the insecticide carbaryl that exceeded the guideline for protecting aquatic life. Every water sample revealed a low concentration of volatile organic compounds, including benzene, toluene

  8. Physical performance deterioration of temporary housing residents after the Great East Japan Earthquake

    Directory of Open Access Journals (Sweden)

    Takeaki Ishii

    2015-01-01

    We revealed that standing stability was impaired among elderly temporary housing residents 1.5 years after the disaster. Disaster responders should take into account the health risks associated with living in temporary housing.

  9. Maintaining placement of temporary enteral feeding tubes in adults: a critical appraisal of the evidence.

    Science.gov (United States)

    Stepter, Catherine R

    2012-01-01

    Maintaining placement of temporary enteral feeding tubes requires ongoing bedside nursing assessment. Tube placement verification is essential to detect and minimize adverse effects. A critical appraisal of current evidence and best practice recommendations regarding temporary feeding tubes is provided.

  10. Communities of belonging in the temporariness of the Danish Asylum System: Shalini’s anchoring points

    DEFF Research Database (Denmark)

    Verdasco, Andrea

    2018-01-01

    Refugees often find themselves in a protracted situation of temporariness, as applications for asylum are processed, deportations negotiated and possible extensions of temporary protection status considered within the context of increasingly restrictive governmental policies across Europe. Through...

  11. Diatom-based models for inferring water chemistry and hydrology in temporary depressional wetlands

    CSIR Research Space (South Africa)

    Riato, L

    2017-08-01

    Full Text Available Information on the response of temporary depressional wetland diatoms to human-induced disturbances is a limited and important component for the development of temporary wetland biological assessments in human-modified landscapes. Establishing a...

  12. 5 CFR 890.1105 - Initial election of temporary continuation of coverage; application time limitations and...

    Science.gov (United States)

    2010-01-01

    ... (ii) The date of the divorce or annulment. (e) If an individual who is eligible for temporary... determines that an eligible individual was unable, for cause beyond his or her control, to elect temporary...

  13. Reducing bias in survival under non-random temporary emigration

    Science.gov (United States)

    Peñaloza, Claudia L.; Kendall, William L.; Langtimm, Catherine Ann

    2014-01-01

    Despite intensive monitoring, temporary emigration from the sampling area can induce bias severe enough for managers to discard life-history parameter estimates toward the terminus of the times series (terminal bias). Under random temporary emigration unbiased parameters can be estimated with CJS models. However, unmodeled Markovian temporary emigration causes bias in parameter estimates and an unobservable state is required to model this type of emigration. The robust design is most flexible when modeling temporary emigration, and partial solutions to mitigate bias have been identified, nonetheless there are conditions were terminal bias prevails. Long-lived species with high adult survival and highly variable non-random temporary emigration present terminal bias in survival estimates, despite being modeled with the robust design and suggested constraints. Because this bias is due to uncertainty about the fate of individuals that are undetected toward the end of the time series, solutions should involve using additional information on survival status or location of these individuals at that time. Using simulation, we evaluated the performance of models that jointly analyze robust design data and an additional source of ancillary data (predictive covariate on temporary emigration, telemetry, dead recovery, or auxiliary resightings) in reducing terminal bias in survival estimates. The auxiliary resighting and predictive covariate models reduced terminal bias the most. Additional telemetry data was effective at reducing terminal bias only when individuals were tracked for a minimum of two years. High adult survival of long-lived species made the joint model with recovery data ineffective at reducing terminal bias because of small-sample bias. The naïve constraint model (last and penultimate temporary emigration parameters made equal), was the least efficient, though still able to reduce terminal bias when compared to an unconstrained model. Joint analysis of several

  14. Temporary Losses of Highway Capacity and Impacts on Performance

    Energy Technology Data Exchange (ETDEWEB)

    Chin, S.M.

    2002-07-31

    Traffic congestion and its impacts significantly affect the nation's economic performance and the public's quality of life. In most urban areas, travel demand routinely exceeds highway capacity during peak periods. In addition, events such as crashes, vehicle breakdowns, work zones, adverse weather, and suboptimal signal timing cause temporary capacity losses, often worsening the conditions on already congested highway networks. The impacts of these temporary capacity losses include delay, reduced mobility, and reduced reliability of the highway system. They can also cause drivers to re-route or reschedule trips. Prior to this study, no nationwide estimates of temporary losses of highway capacity had been made by type of capacity-reducing event. Such information is vital to formulating sound public policies for the highway infrastructure and its operation. This study is an initial attempt to provide nationwide estimates of the capacity losses and delay caused by temporary capacity-reducing events. The objective of this study was to develop and implement methods for producing national-level estimates of the loss of capacity on the nation's highway facilities due to temporary phenomena as well as estimates of the impacts of such losses. The estimates produced by this study roughly indicate the magnitude of problems that are likely be addressed by the Congress during the next re-authorization of the Surface Transportation Programs. The scope of the study includes all urban and rural freeways and principal arterials in the nation's highway system for 1999. Specifically, this study attempts to quantify the extent of temporary capacity losses due to crashes, breakdowns, work zones, weather, and sub-optimal signal timing. These events can cause impacts such as capacity reduction, delays, trip rescheduling, rerouting, reduced mobility, and reduced reliability. This study focuses on the reduction of capacity and resulting delays caused by the temporary

  15. Industrial production and temporary development after the Emilian Earthquake.

    Directory of Open Access Journals (Sweden)

    Matteo Scamporrino

    2014-02-01

    Full Text Available The earthquake that on the 20th of May hit Emilia has not been one of the most disastrous in modern Italian history, but it has highlighted the problem of preservation of industrial activities during a reconstruction process. In addition, precisely this system, characterized by great vitality and productivity but also by large seismic vulnerability, was the most affected. Through an analysis of the damages suffered by the industrial facilities, not so much as single buildings but precisely as a system, we want to highlight the challenges imposed by the earthquake: on the one hand, the urgent need to provide for delocalizations and temporary structures to avoid a stop in production in the short­term, and on the other, the re­design and anti­seismic re­planning of productive areas. A proposal was put forward to create temporary zones adjacent to the damaged areas, on which temporary structures should be installed. The latter would allow to limit relocations of medium­long range, which are negative for the territory, and at the same time it would allow the flexibility necessary to re­organize the supply chains. However, in Italy, the management of temporary solutions is seen as a practice too much linked to the emergency and too little to the reconstruction process. The first measures put into place by both the State and the Regions, however, do not seem to show a true understanding of the importance of management and regulations of temporary solutions in the medium­ long term.

  16. Remains of the ancient ports and anchorage points at Miyani and Visawada, on the west coast of India: A study based on underwater investigations

    Digital Repository Service at National Institute of Oceanography (India)

    Gaur, A.S.; Sundaresh; Tripati, S.

    as an excellent natural harbour. The important antiquities include varieties of stone anchors, which are very similar to those reported from Dwarka and Bet Dwarka. The identification of ancient anchorage points between water depth of 5 and 15 m is another...

  17. Evaluation of Titanium Miniscrew Implants as a Source of Intraoral Anchorage for en masse Intrusion of Maxillary Anterior Teeth: A Clinical Study

    Directory of Open Access Journals (Sweden)

    Bhavna Virang

    2013-01-01

    Conclusion: Mini-implants were used to deliver light continuous forces of optimal magnitudes and they were observed to be efficient and stable source of anchorage for en masse intrusion of the maxillary anterior teeth. The amount of intrusion achieved for six maxillary anterior teeth was statistically and clinically significant without significant torque changes.

  18. Barium Promotes Anchorage-Independent Growth and Invasion of Human HaCaT Keratinocytes via Activation of c-SRC Kinase

    Science.gov (United States)

    Thang, Nguyen Dinh; Yajima, Ichiro; Kumasaka, Mayuko Y.; Ohnuma, Shoko; Yanagishita, Takeshi; Hayashi, Rumiko; Shekhar, Hossain U.; Watanabe, Daisuke; Kato, Masashi

    2011-01-01

    Explosive increases in skin cancers have been reported in more than 36 million patients with arsenicosis caused by drinking arsenic-polluted well water. This study and previous studies showed high levels of barium as well as arsenic in the well water. However, there have been no reports showing a correlation between barium and cancer. In this study, we examined whether barium (BaCl2) may independently have cancer-related effects on human precancerous keratinocytes (HaCaT). Barium (5–50 µM) biologically promoted anchorage-independent growth and invasion of HaCaT cells in vitro. Barium (5 µM) biochemically enhanced activities of c-SRC, FAK, ERK and MT1-MMP molecules, which regulate anchorage-independent growth and/or invasion. A SRC kinase specific inhibitor, protein phosphatase 2 (PP2), blocked barium-mediated promotion of anchorage-independent growth and invasion with decreased c-SRC kinase activity. Barium (2.5–5 µM) also promoted anchorage-independent growth and invasion of fibroblasts (NIH3T3) and immortalized nontumorigenic melanocytes (melan-a), but not transformed cutaneous squamous cell carcinoma (HSC5 and A431) and malignant melanoma (Mel-ret) cells, with activation of c-SRC kinase. Taken together, our biological and biochemical findings newly suggest that the levels of barium shown in drinking well water independently has the cancer-promoting effects on precancerous keratinocytes, fibroblast and melanocytes in vitro. PMID:22022425

  19. Ferroelectric devices

    CERN Document Server

    Uchino, Kenji

    2009-01-01

    Updating its bestselling predecessor, Ferroelectric Devices, Second Edition assesses the last decade of developments-and setbacks-in the commercialization of ferroelectricity. Field pioneer and esteemed author Uchino provides insight into why this relatively nascent and interdisciplinary process has failed so far without a systematic accumulation of fundamental knowledge regarding materials and device development.Filling the informational void, this collection of information reviews state-of-the-art research and development trends reflecting nano and optical technologies, environmental regulat

  20. Catalytic devices

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Ming; Zhang, Xiang

    2018-01-23

    This disclosure provides systems, methods, and apparatus related to catalytic devices. In one aspect, a device includes a substrate, an electrically insulating layer disposed on the substrate, a layer of material disposed on the electrically insulating layer, and a catalyst disposed on the layer of material. The substrate comprises an electrically conductive material. The substrate and the layer of material are electrically coupled to one another and configured to have a voltage applied across them.

  1. Quantitative and qualitative assessment of anchorage loss during en-masse retraction with indirectly loaded miniscrews in patients with bimaxillary protrusion.

    Science.gov (United States)

    Monga, Nitika; Kharbanda, Om Prakash; Samrit, Vilas

    2016-08-01

    This study provides vital insight in assessing anchorage loss when miniscrews are indirectly loaded. The study sample comprised 18 patients with bimaxillary protrusion (14 girls, 4 boys; mean age, 17.3 ± 4.6 years) selected from a database of 89 patients treated with miniscrews. All subjects who were selected required extraction of all first premolars and maximum anchorage. After initial leveling and aligning, miniscrews were placed between the first molar and the second premolar in all 4 quadrants and loaded by the indirect method at 3 weeks after placement with 200-g nickel-titanium alloy closed-coil springs for en-masse retraction. Mean treatment duration was 29.7 ± 6.8 months. Pretreatment and posttreatment lateral cephalograms were analyzed to measure the amount of anchorage loss, incisor retraction, and the incisors' angular change in reference to the pterygoid vertical reference line and were evaluated by the structural superimposition method. The ratio of incisor retraction to molar protraction was 4.2 in the maxilla and 4.7 in the mandible. The first molars showed mean extrusion of 0.20 mm in the maxilla and 0.57 mm in the mandible; these were statistically insignificant. The mean angular change of the first molars was -2.43° in the maxilla and -0.03° in the mandible. The mean anchorage loss in reference to the pterygoid vertical was 1.3 mm in the maxilla and 1.1 mm in the mandible; these were statistically significant. Structural superimpositions showed mean change in molar position of 0.83 mm in the maxilla and 0.87 mm in the mandible, and 5.77 mm in the maxillary incisor and 5.43 mm in the mandibular incisor. These results were compared with the direct anchorage method reported in the literature. Indirect miniscrew anchorage can be a viable alternative to direct anchorage. Copyright © 2016. Published by Elsevier Inc.

  2. 76 FR 37147 - Notice of Temporary Closures and Temporary Restrictions on Specific Uses of Public Lands in...

    Science.gov (United States)

    2011-06-24

    ... otherwise introducing into the human body a controlled substance in violation of any State or Federal law... closures and temporary restrictions will be in effect from August 1, 2011 through September 19, 2011 and... craft previously approved by the BLM authorized officer. B. Alcohol 1. Possession of an open container...

  3. 33 CFR 74.01-15 - Charges for placement of temporary aids.

    Science.gov (United States)

    2010-07-01

    ... temporary aids. 74.01-15 Section 74.01-15 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY AIDS TO NAVIGATION CHARGES FOR COAST GUARD AIDS TO NAVIGATION WORK Charges to the Public § 74.01-15 Charges for placement of temporary aids. Charges for placement of temporary aids will be...

  4. 29 CFR 4.176 - Payment of fringe benefits to temporary and part-time employees.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Payment of fringe benefits to temporary and part-time... to temporary and part-time employees. (a) As set forth in § 4.165(a)(2), the Act makes no distinction, with respect to its compensation provisions, between temporary, part-time, and full-time employees...

  5. Temporary work and health and well-being : a two-way street?

    NARCIS (Netherlands)

    Wagenaar, A.F.

    2013-01-01

    Since the mid-1980s there has been a remarkable growth in the share of temporary workers across the European Union. To date, this employer-initiated trend to become more flexible and cost-effective has resulted in over 25 million European temporary workers. As temporary employment is often not

  6. Temporary Contracts: Effect on Job Satisfaction and Personal Lives of Recent Phd Graduates

    Science.gov (United States)

    Waaijer, Cathelijn J. F.; Belder, Rosalie; Sonneveld, Hans; van Bochove, Cornelis A.; van der Weijden, Inge C. M.

    2017-01-01

    In this study, we assess the effects of temporary employment on job satisfaction and the personal lives of recent PhD graduates. Temporary employment is becoming increasingly prevalent in many sectors, but has been relatively common in academia, especially for early career scientists. Labor market theory shows temporary employment to have a…

  7. Recombinant differential anchorage probes that tower over the spatial dimension of intracellular signals for high content screening and analysis.

    Science.gov (United States)

    Schembri, Laura; Zanese, Marion; Depierre-Plinet, Gaelle; Petit, Muriel; Elkaoukabi-Chaibi, Assia; Tauzin, Loic; Florean, Cristina; Lartigue, Lydia; Medina, Chantal; Rey, Christophe; Belloc, Francis; Reiffers, Josy; Ichas, François; De Giorgi, Francesca

    2009-12-01

    Recombinant fluorescent probes allow the detection of molecular events inside living cells. Many of them exploit the intracellular space to provide positional signals and, thus, require detection by single cell imaging. We describe here a novel strategy based on probes capable of encoding the spatial dimension of intracellular signals into "all-or-none" fluorescence intensity changes (differential anchorage probes, DAPs). The resulting signals can be acquired in single cells at high throughput by automated flow cytometry, (i) bypassing image acquisition and analysis, (ii) providing a direct quantitative readout, and (iii) allowing the exploration of large experimental series. We illustrate our purpose with DAPs for Bax and the effector caspases 3 and 7, which are keys players in apoptotic cell death, and show applications in basic research, high content multiplexed library screening, compound characterization, and drug profiling.

  8. Clinical applications of the Mini-Screw-Anchorage-System (M.A.S.) in the maxillary alveolar bone.

    Science.gov (United States)

    Carano, Aldo; Velo, Stefano; Incorvati, Cristina; Poggio, Paola

    2004-01-01

    anchorage control with self-tapping screws has become an important part of the clinical management of the orthodontic patients. Mechanical resistance and sites of insertion of miniscrews as orthodontic anchorage are critical to ensure successful outcomes. Aim of this clinical study was threefold: 1) to measure the mechanical resistance of the M.A.S., 2) to evaluate if the alveolar areas usually selected for mini-screws placement are adequate, 3) to illustrate the most frequent clinical application on the maxillary alveolar bone. two methods were chosen to test these screws mechanically, representing two potential modes of failure during insertion or removal: torsional strenght and bending strenght. Three-dimension images of fifty maxillas have been retrieved from a group of 200 patients, age range between 20 and 40 years with a new type of tomogram called Newtom System. For each area mesio-distal and labio-lingual measurements from four horizontal cuts made at 2-5-8-11 mm below the bone-crest have been evaluated. the mean value of resistance to breakage in torsion is of 48.7 N.cm (around 5 Kg) for the miniscrew of 1.5 diameter, while the mean value of resistance to breakage in torsion is of 23.4 N.cm (around 2 Kg) for the miniscrew of 1.3 diameter.. The mean value of resistance to breakage in flexion is of 120.4 N (around 12 Kg) for the miniscrew of 1.5 diameter, while the mean value of resistance to the flexion is of 63.7 N (around 6 Kg) for the miniscrew of 1.3 diameter. On the maxillary alveolar bone the highest amount of bone was in mesio-distal dimension between 6 and 5 on the palatal side (minimum 1.9 mm at -11 mm cut; maximum 5.5 mm at -5 mm cut). The smallest amount of bone was in the tuber (minimum 0.2 mm; maximum 1.3 mm). Examination of the labio-palatal dimension demonstrated similar high thickness between 5-6 and 6-7 (minimum 3.7 mm at -11 mm cut; maximum 13.2 mm at -2 mm cut). The smallest amount of bone was recorded on the tuber (minimum 0.6 mm

  9. Temporary Agency Workers—Precarious Workers? Perceived Job Security and Employability for Temporary Agency Workers and Client Organization Employees at a Swedish Manufacturing Plant

    Directory of Open Access Journals (Sweden)

    Kristina Håkansson

    2015-12-01

    Full Text Available The vulnerable situation of temporary agency workers is manifested in previous research that evidences the job insecurity of this group. However, research shows that this insecurity is due to the temporary nature of employment contracts for this group of workers. In Sweden, where temporary agency workers have the same type of employment contracts (i.e., temporary or permanent contracts and are entitled to the same employment protection as other groups of employees, one might expect a different picture. This article examines the situation of temporary agency workers who have the same working conditions as client organization employees. These workers have permanent contracts and are treated like client organization employees. We have chosen to examine this case because we anticipate it to be very likely to contradict statements regarding temporary agency workers’ affiliation with the precariat. This article aims to empirically elucidate the precariousness of temporary agency workers who are highly integrated with client organization employees and who share the same work tasks. Our analysis shows that competence development is crucial to perceptions of job security. However, temporary agency workers lack competence development, both on the part of the employer (the temporary work agency and on the part of the client organization. The client organization has no incentive to invest more than the required competencies, since temporary agency workers only constitute a buffer in case of a downturn. We argue that it is the agency workers’ connection with a buffer that results in a lack of job security. Our results also show that temporary agency workers’ job security could be increased if temporary agencies were to invest in competence development for the agency workers, thus overcoming these workers’ vulnerability in constituting a buffer.

  10. Comparison of the intrusion effects on the maxillary incisors between implant anchorage and J-hook headgear.

    Science.gov (United States)

    Deguchi, Toru; Murakami, Takashi; Kuroda, Shingo; Yabuuchi, Toshinori; Kamioka, Hiroshi; Takano-Yamamoto, Teruko

    2008-05-01

    Recently, miniscrews have been used to provide anchorage during orthodontic treatment, especially for incisor intrusion. Miniscrews during incisor intrusion are commonly used in implant orthodontics. Traditionally, effective incisor intrusion has been accomplished with J-hook headgear. In this study, we compared the effect of incisor intrusion, force vector, and amount of root resorption between implant orthodontics and J-hook headgear. Lateral cephalometric radiographs from 8 patients in the implant group and 10 patients in the J-hook headgear group were analyzed for incisor retraction. The estimated force vector was analyzed in the horizontal and vertical directions in both groups. Root resorption was also measured on periapical radiographs. In the implant group, significant reductions in overjet, overbite, maxillary incisor to palatal plane, and maxillary incisor to upper lip were observed after intrusion of the incisors. In the J-hook headgear group, significant reductions in overjet, overbite, maxillary incisor to upper lip, and maxillary incisor to SN plane were observed after intrusion of the incisors. There were significantly greater reductions in overbite, maxillary incisor to palatal plane, and maxillary incisor to upper lip in the implant group than in the J-hook headgear group. Estimated force analysis resulted in significantly more force in the vertical direction and less in the horizontal direction in the implant group. Furthermore, significantly less root resorption was observed in the implant group compared with the J-hook headgear group. The maxillary incisors were effectively intruded by using miniscrews as orthodontic anchorage without patient cooperation. The amount of root resorption was not affected by activating the ligature wire from the miniscrew during incisor intrusion.

  11. Characterization of the aspects of osteoprogenitor cell interactions with physical tetracalcium phosphate anchorage on titanium implant surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Chia-Ling [Advanced Medical Devices and Composites Laboratory, Department of Fiber and Composite Materials, Feng Chia University, Taichung 40724, Taiwan (China); Dental Medical Devices and Materials Research Center, College of Dental Medicine, Kaohsiung Medical University, Kaohsiung 807, Taiwan (China); Chang, Ya-Yuan; Liou, Cian-Hua [Alliance Global Technology Co., Ltd., Kaohsiung Medical Device Special Zone in Southern Taiwan Science Park, Kaohsiung 82151, Taiwan (China); Chen, Wen-Cheng, E-mail: wencchen@fcu.edu.tw [Advanced Medical Devices and Composites Laboratory, Department of Fiber and Composite Materials, Feng Chia University, Taichung 40724, Taiwan (China)

    2015-04-01

    Well-designed implants are used not only to modify the geometry of the implant but also to change the chemical properties of its surfaces. The present study aims to assess the biofunctional effects of tetracalcium phosphate (TTCP) particles as a physical anchor on the implant surface derived through sandblasting. The characteristics of the surface, cell viability, and alkaline phosphatase (ALP) activity toward osteoprogenitor cells (D1) were obtained. D1 cells were cultured on a plain surface that underwent sandblasting and acid etching (SLA) (control SLA group) and on different SLA surfaces with different anchoring TTCP rates (new test groups, M and H). The mean anchoring rates were 57% (M) and 74% (H), and the anchored thickness was estimated to range from 12.6 μm to 18.3 μm. Compared with the control SLA surface on Ti substrate, the new test groups with different TTCP anchoring rates (M and H) failed to improve cell proliferation significantly but had a well-differentiated D1 cell phenotype that enhanced ALP expression in the early stage of cell cultures, specifically, at day 7. Results suggest that the SLA surface with anchored TTCP can accelerate progenitor bone cell mineralization. This study shows the potential clinical application of the constructed geometry in TTCP anchorage on Ti for dental implant surface modification. - Highlights: • TTCP (tetracalcium phosphate) as a physical anchorage on implant is characterized. • Theoretical values of anchored thickness and capping areas were estimated. • TTCP anchored by sandblasting can accelerate progenitor bone cell mineralization. • TTCP anchored on SLA (sandblasting and acid etching) surface is a promising method.

  12. Estudo comparativo da eficiência do aparelho extrabucal e da barra transpalatina como meios de ancoragem durante a fase de retração Anchorage comparative study provided by extraoral arch and transpalatal bar in the anterior teeth retraction therapy

    Directory of Open Access Journals (Sweden)

    Marcos Salomão Moscardini

    2007-04-01

    Full Text Available OBJETIVO: o objetivo do presente trabalho foi avaliar a eficiência de dois dispositivos ortodônticos, o aparelho extrabucal (AEB e a barra transpalatina (BTP, no controle de ancoragem dos primeiros molares superiores, no processo de retração dos dentes anteriores, nos casos de extrações de pré-molares superiores. METODOLOGIA: a amostra foi composta por 30 pacientes, que foram divididos em 2 grupos. O grupo 1 foi composto por 14 pacientes, que utilizaram como meio de ancoragem o AEB, e o grupo 2 foi composto por 16 pacientes, que utilizaram a BTP como meio de ancoragem. Foram obtidas telerradiografias laterais iniciais e finais ao processo de retração dos dentes anteriores, onde foram avaliadas, comparativamente, a posição inicial e final dos molares superiores, tanto no sentido quantitativo (movimento mesial do molar como qualitativo (inclinação mesial da coroa do molar. RESULTADOS E CONCLUSÕES: os resultados permitiram concluir que não houve diferença estatisticamente significante entre os dois grupos, no que diz respeito ao aspecto quantitativo da perda de ancoragem, no entanto, o AEB se mostrou mais eficiente no sentido qualitativo, pois permitiu uma menor inclinação mesial da coroa dos molares.AIM: The present study evaluated the efficiency of two orthodontic devices, the extraoral arch and transpalatal bar when used to anchorage control of upper first molars when two bicuspids were extracted. METHODS: The samples were divided into two groups. Group 1 was composed by 14 patients that used the extraoral arch as anchorage control device and group 2 was composed by 16 patients that used the transpalatal bar as anchorage control device. Initial and final lateral cephalometric radiographs were taken before and after the retraction of anterior teeth, to compare the initial and final upper molar positions either in the quantitative (mesial molar movement and in the qualitative (mesial inclination of molar crown aspects. RESULTS

  13. Comparison of topical and infiltration anesthesia for orthodontic mini-implant placement

    OpenAIRE

    Valieri, Matheus Miotello; Freitas, Karina Maria Salvatore de; Valarelli, Fabricio Pinelli; Cançado, Rodrigo Hermont

    2014-01-01

    Objective: To compare the acceptability and effectiveness of topical and infiltration anesthesia for placement of mini-implants used as temporary anchorage devices. Methods: The sample comprised 40 patients, 17 males and 23 females, whose mean age was 26 years old and who were all undergoing orthodontic treatment and in need for anchorage reinforcement. Mini-implants were bilaterally placed in the maxilla of all individuals, with infiltration anesthesia on one side and topical anesthesia...

  14. Identification device

    Science.gov (United States)

    Lin, Jian-Shian; Su, Chih-Chieh; Chou, Ta-Hsin; Wu, Mount-Learn; Lai, Chieh-Lung; Hsu, Che-Lung; Lan, Hsiao-Chin; Huang, Hung-I.; Liu, Yung-Chih; Tu, Zong-Ru; Lee, Chien-Chieh; Chang, Jenq-Yang

    2007-09-01

    In this Letter, the identification device disclosed in the present invention is comprised of: a carrier and a plurality of pseudo-pixels; wherein each of the plural pseudo-pixels is formed on the carrier and is further comprised of at least a light grating composed of a plurality of light grids. In a preferred aspect, each of the plural light grids is formed on the carrier while spacing from each other by an interval ranged between 50nm and 900nm. As the aforesaid identification device can present specific colors and patterns while it is being viewed by naked eye with respect to a specific viewing angle, the identification device is preferred for security and anti-counterfeit applications since the specific colors and patterns will become invisible when it is viewed while deviating from the specific viewing angle.

  15. [Intraoral protrusion devices in obstructive sleep apnea. Dental findings and possible treatments].

    Science.gov (United States)

    Rose, E; Ridder, G J; Staats, R; Jonas, I E

    2002-01-01

    Oral protrusive devices are regarded as an alternative treatment option for snoring and mild to moderate obstructive breathing disorders. In addition to the polysomnographic indication based on the respiratory and somnographic findings, healthy stomatognatic conditions with sufficient dental retention for the device are essential for a successful treatment. The sleep laboratory of the University Hospital of Freiburg i. Br. referred 112 patients with obstructive sleep apnea to the Department of Orthodontics for treatment with an oral protrusive device. All patients were examined clinically and with a panoramic radiograph with regard to continuous treatment. To maximize treatment success and minimize dental side effects, close collaboration with dental colleagues is necessary in treatment with an oral protrusive device. Acute periodontitis, periodontal lesions, insufficient dental anchorage, and temporomandibular symptoms can result in unwanted dental side effects and therefore limit the indication of this therapeutic approach.

  16. Severe skeletal Class II Division 1 malocclusion in postpubertal girl treated using Forsus with miniplate anchorage

    OpenAIRE

    Patil, Harshal Ashok; Kerudi, Veerendra V; Rudagi, BM; Sharan, Jitendra S; Tekale, Pawankumar Dnyandeo

    2017-01-01

    This case report outlines the treatment of a 17-year-old female with Class II Division 1 malocclusion with mandibular retrusion, deep bite, and convex facial profile. The Forsus fatigue resistance device with miniplate was used for this patient and it was very affecting tool in correcting both skeletal and dental parameters. The total active treatment time was 19 months. This method can serve as an alternate choice of treatment, especially those who refuse orthognathic surgery. Hence, Forsus ...

  17. Need for relevant timescales when crediting temporary carbon storage

    DEFF Research Database (Denmark)

    Jørgensen, Susanne Vedel; Hauschild, Michael Zwicky

    2013-01-01

    Purpose: Earth faces an urgent need for climate change mitigation, and carbon storage is discussed as an option. Approaches for assessing the benefit of temporary carbon storage in relation to carbon footprinting exist, but many are based on a 100-year accounting period, disregarding impacts after...... carbon storage in carbon footprinting. Methods: Implications of using a 100-year accounting period is evaluated via a literature review study of the global carbon cycle, as well as by analysing the crediting approaches that are exemplified by the PAS 2050 scheme for crediting temporary carbon storage....... Results and discussion: The global carbon cycle shows timescales of thousands of years for the transport of carbon from the atmosphere to pools beyond the near-surface layers of the Earth, from where it will not readily be re-emitted as a response to change in near-surface conditions. Compared...

  18. Temporary alopecia after embolization of an arteriovenous malformation.

    Science.gov (United States)

    López, Verónica; López, Inmaculada; Ricart, José M

    2012-09-15

    Alopecia after head and neck radiotherapy has been extensively reported in the literature. However, alopecia after endovascular procedures is seldom reported in the dermatological literature. Prolonged fluoroscopic imaging during these procedures may cause serious radiation injuries to the skin, such as dermatitis or alopecia. Radiation-induced temporary alopecia is a peculiar form of radiodermitis that occurs over the areas of the scalp that receive the highest doses of radiation. Although repopulation of alopecic patches occurs spontaneously without treatment, it is important to recognize this disorder to establish a correct diagnosis and inform patients about this transient side effect. We report a 44-year-old woman presenting with temporary alopecia after embolization of an arteriovenous malformation.

  19. Impact of a temporary stoma on patients' everyday lives

    DEFF Research Database (Denmark)

    Danielsen, Anne K; Soerensen, Erik E; Burcharth, Kirsten

    2013-01-01

    -focused coping strategies. These strategies may be supported when patients have a high sense of coherence. Furthermore, patients' disclosure of the stoma as a way to master feelings of stigma should be facilitated. Stoma education is central for patients, and group-based learning that involves lay educators...... perspective. METHODS: Data were processed using qualitative content analysis. RESULTS: The creation of a temporary stoma led to feelings of uncertainty related to being in an undecided situation. Stoma creation led to feelings of stigma and worries about disclosure. Patients proposed group-based patient...... education with lay educators with a stoma to make sure that information about the stoma was based on real-life experiences. CONCLUSIONS: Creation of a temporary stoma was linked to uncontrollable feelings of uncertainty. Professionals should assist patients with focus on coping strategies...

  20. Self-erecting temporary shelter: Kinetic Design and Vacuumatics

    Directory of Open Access Journals (Sweden)

    Vincenzo Sapienza

    2014-05-01

    Full Text Available SETS (Self-Erecting Temporary Shelter is a project born to realize a temporary, flexible, lightweight, experimental pavilion. It is a synthesis between the ancient origami’s art and the innovative vacuumatics. So SETS is able to switch from two-dimensional configuration, for transportation and storage, to the spatial one, adaptable to several uses (from fashion shows to emergencies. To achieve this goal SETS is based on two qualifying items: a strong geometric control, due to the parametric design tool, and the vacuum technology, that is able to ‘freeze’ it into the chosen configuration. In this article the authors will describe the topics of the first steps of the research, that allowed them to make some physic model in scale. They will also show the program of the following phases, that are addressed to the building of a prototype.

  1. Temporary Life Changes and the Timing of Divorce.

    Science.gov (United States)

    Fallesen, Peter; Breen, Richard

    2016-10-01

    Marriage is a risky undertaking that people enter with incomplete information about their partner and their future life circumstances. A large literature has shown how new information gained from unforeseen but long-lasting or permanent changes in life circumstances may trigger a divorce. We extend this literature by considering how information gained from a temporary change in life circumstances-in our case, a couple having a child with infantile colic-may affect divorce behavior. Although persistent life changes are known to induce divorce, we argue that a temporary stressful situation allows couples more quickly to discern the quality of their relationship, in some cases leading them to divorce sooner than they otherwise would have. We formalize this argument in a model of Bayesian updating and test it using data from Denmark. We find that the incidence of infantile colic shortens the time to divorce or disruption among couples who would have split up anyway.

  2. THE MORBIDITY WITH TEMPORARY DISABILITY OF WORKING MILITARY RETIREES

    Directory of Open Access Journals (Sweden)

    A. V. Popov

    2017-01-01

    Full Text Available The purpose of the study. The study of morbidity with temporary disability of working officers of the Navy, retired and resigned, as well as affecting the level of certain factors.Materials and methods. A sociological survey of 574 officers of the Navy, who were dismissed from the Armed Forces to the reserve (resignation, was held. 32.7% of them at the time of the survey have been working.Results. 48.8% of respondents rated their health at the time of the survey as a good for their age. The level of morbidity with temporary disability (MWTD in 100 operating reserve (retired officers amounted to 94 cases. The number of days of temporary disability was equal to 867 days per 100 employed military pensioners. Most long-term treatment (up to 47 days were required for patients with blood diseases. Analysis of the structure of diseases of reserve (retired officers leading to temporary disability, showed that the bulk of the cases (63.7 per cent were diseases of the respiratory organs, in second place were diseases of the circulatory system (24,5%, the third — diseases of the genitourinary system (4.3%. The average number of existing diseases to working military retirees less than idle: 1.9 vs 2.1. The average number of diseases at the single soldiers discharged was significantly more than that of living in family.Conclusion. The features of level and structure, as well as risk factors of MWTD should be considered in the development and adoption of administrative decisions directed on preservation and strengthening of health of reserve (retired officers. 

  3. Temporary and circular labour migration and codevelpment: a case estudy

    OpenAIRE

    Elena Sánchez-Montijano; Rocío Faúndez García

    2012-01-01

    The search for new ways to manage international migration is one of the main topics at the current political agendas. Within this framework, Temporary and Circular Labour Migration (TCLM) as a way of fl ow management on the one hand, and co-development as a set of actions that seek to articulate migration and development on the other, have recently been promoted as double win situations. Both initiatives depart from the assumption that migrants can make important contributions to development,...

  4. The Diaspora and Temporary Migrant Workers: Basic Concepts

    Directory of Open Access Journals (Sweden)

    Marija Krstić

    2016-02-01

    Full Text Available The paper looks at the phenomenon of migrant workers who emigrated to Western European countries after World War II. The labor demands created by the economic reconstruction of these countries, most notably Great Britain, West Germany, France, Switzerland, the Benelux countries, Sweden and Austria, coupled with low birth rates and high death rates, made it necessary for them to hire immigrant workers. On the other hand, poor economic conditions, few employment opportunities and a yearning for a higher standard of living drove workers from Italy, Spain, Portugal, Turkey, Yugoslavia, Greece, Ireland, Finland and North Africa to seek work abroad. These temporary migrant workers represent a link between their countries of origin and their host countries, and, as a group of people maintaining links with their native countries, they can also be considered their countries’ diaspora. However, considering the temporary nature of their residence abroad, it is questionable whether they actually are a diaspora. It is for this reason that the paper juxtaposes the phenomena of the diaspora and temporary migrant workers in order to analyze the question of whether, when and how these workers become a diaspora. In particular, it focuses on migrant workers from Yugoslavia, usually referred to as “gastarbajteri” (gastarbeiter, who in the 1960s and 1970s migrated mostly to West Germany, Austria, Australia, France and Switzerland, and on their political treatment by the Yugoslav state.

  5. Permanent versus temporary restorations after emergency pulpotomies in primary molars.

    Science.gov (United States)

    Guelmann, Marcio; Fair, Jodi; Bimstein, Enrique

    2005-01-01

    The purpose of this retrospective study was to determine if immediate placement of a stainless steel crown (SSC) after emergency pulpotomies in primary molars would result in a better outcome when compared to different temporary restorations. Records of 94 emergency pulpotomies in primary molars performed at a university pediatric graduate dental clinic between July 2001 and June 2004 were analyzed. Inclusion criteria included: (1) teeth with a positive history of spontaneous or elicited pain; (2) deep caries with close approximation to the pulp; (3) absence of clinical and radiographic signs of pulpal degeneration; (4) abnormal mobility; or (5) swelling. Pulpotomized teeth were temporarily restored with a zinc oxide eugenol-based temporary restoration (IRM) covered with Ketac Molar or with a permanent restoration (SSC). The time interval between emergency and definitive treatment or recall, age, gender, tooth type, and arch were the variables analyzed in the study. Success was determined by record (progress notes and radiographs) verification of SSC placement in case of a temporary restoration and by confirmation of crown presence during recall exam. Data from emergency pulpotomies restored only with IRM was added to the study and included in the statistical analysis. Superior clinical success was obtained when emergency pulpotomies were restored with SSC (86%) when compared to IRM only (61%) or IRM and Ketac Molar combined (77%). Statistical significance was obtained in favor of SSC when survival analysis was performed (P.05). Immediate placement of an SSC tended to improve the chances for success when emergency pulpotomies are performed.

  6. Detection device

    Science.gov (United States)

    Smith, J.E.

    1981-02-27

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  7. Medical Devices

    NARCIS (Netherlands)

    Verkerke, Gijsbertus Jacob; Mahieu, H.F.; Geertsema, A.A.; Hermann, I.F.; van Horn, J.R.; Hummel, J. Marjan; van Loon, J.P.; Mihaylov, D.; van der Plaats, A.; Schraffordt Koops, H.; Schutte, H.K.; Veth, R.P.H.; de Vries, M.P.; Rakhorst, G.; Shi, Donglu

    2004-01-01

    The development of new medical devices is a very time-consuming and costly process. Besides the time between the initial idea and the time that manufacturing and testing of prototypes takes place, the time needed for the development of production facilities, production of test series, marketing,

  8. Printing Device

    NARCIS (Netherlands)

    Berg, van den M.J.; Markies, P.R.; Zuilhof, H.

    2014-01-01

    An ink jetprinting device includes a pressure chamber formed by a plurality of wall segments, a first aperture extending through a wall segment and communicating with an ink jet orifice and a second aperture extending through a wall segment and communicating with an ink supply duct. The pressure

  9. TEMPORARY CONTRACEPTION PRACTICES AMONG ELIGIBLE COUPLES IN A RURAL AREA OF CHITTOOR DISTRICT , A. P

    Directory of Open Access Journals (Sweden)

    Gopi Krishna

    2015-07-01

    Full Text Available BACKGROUND: Family welfare services prevent one third of all maternal deaths by allowing women to delay motherhood, space births, avoid unintended pregnancies & unsafe abortions and stop child bearing when they have reached their desired family size. However, national - level surveys show that the adoption of contraceptive methods for spacing has remained low in India. In this context, this present study was conducted to find out the awareness and practice of temporary contraceptive methods among the eligible couples and its association with certain socio - demographic factors. MATERIAL & METHODS : This present study is a cross sectional analytical study carried out in the Pakala Primary Health Centre (PHC in Chittoor district of Andhra Pradesh among 6 , 206 eligible couples during January to June 2015. The findings were analysed using Epiinfo software 7 version (CDC, Atlanta, USA. RESULTS : The awareness regarding oral contraceptive pills (56.4% and i ntrauterine devices (50.0 was found to be relatively higher compared to other methods and least with injectable contraceptives (6.8%. The oral contraceptive pill was found to be the most preferred method of contraception (5.7% followed by intrauterine d evices (4.4% while condom usage was the least preferred method (1.9%. The health worker was the most common person providing motivation for family planning (65.0% followed by friends and neighbours (25.9%. Overall, the temporary contraceptive usage was found to be 12.0%. The adoption was found to be significantly higher in 31 & above years (13.0%, business occupation of husband (15.2%, Hindus (12.6% and backward classes (13.1%. CONCLUSIONS : In depth studies are required to explore the reasons behind non - adoption of spacing methods of contraception in order to promote contraception and reduce fertility

  10. Mechanical circulatory support for bridge to decision: which device and when to decide.

    Science.gov (United States)

    Ziemba, Elizabeth A; John, Ranjit

    2010-07-01

    Despite the many advances in the management of patients with acute heart failure, the outcome for patients with refractory acute cardiogenic shock remains disproportionately poor. Clearly, there is a definitive role for wider application of temporary circulatory support in such patients. Questions remain as to the ideal device, the optimal duration of temporary support, and the ideal timing to bridge these patients to a long-term device. There are currently several options available for circulatory support and include surgically implanted ventricular assist devices, percutaneous assist devices, and extracorporeal membrane oxygenation. This review includes a brief summary of the current assist devices available along with the University of Minnesota's experience with the Levitronix CentriMag system.

  11. 78 FR 69707 - Notice of Temporary Closure to Recreational and Target Shooting on Public Lands at Hartman Rocks...

    Science.gov (United States)

    2013-11-20

    ... Bureau of Land Management Notice of Temporary Closure to Recreational and Target Shooting on Public Lands... Temporary Closure. SUMMARY: Notice is hereby given that a temporary closure to Recreational Shooting is in...: This temporary closure to recreational shooting affects public lands at Hartman Rocks Recreation Area...

  12. Severe skeletal Class II Division 1 malocclusion in postpubertal girl treated using Forsus with miniplate anchorage.

    Science.gov (United States)

    Patil, Harshal Ashok; Kerudi, Veerendra V; Rudagi, B M; Sharan, Jitendra S; Tekale, Pawankumar Dnyandeo

    2017-01-01

    This case report outlines the treatment of a 17-year-old female with Class II Division 1 malocclusion with mandibular retrusion, deep bite, and convex facial profile. The Forsus fatigue resistance device with miniplate was used for this patient and it was very affecting tool in correcting both skeletal and dental parameters. The total active treatment time was 19 months. This method can serve as an alternate choice of treatment, especially those who refuse orthognathic surgery. Hence, Forsus with miniplate might be useful in both growing and postpubertal patients.

  13. Device Design and Test of Fatigue Behaviour of Expansion Anchor Subjected to Tensile Loads

    Directory of Open Access Journals (Sweden)

    Zhang Jinfeng

    2016-01-01

    Full Text Available In order to study on the fatigue behaviour of expansion anchor (M16, grade 8.8 for overhead contact system in electrification railways, a set of safe, practical loading device is designed and a fatigue test campaign was carried out at structural laboratory of China Academy of Building Research on expansion anchor embedded in concrete block. The mobile frame of the loading device was designed well by finite-element simulation. According to some fatigue performance test of expansion anchor with different size and form, the device have been assessed experimentally its dependability. The results were found that no fatigue damage phenomenon occurred in all specimens after 2×106 cycles tensile fatigue test in this specific series. It shows that in the condition of medium level or slightly lower maximum stress limit and nominal stress range, expansion bolt has good fatigue resistance. The biggest relative displacement and the residual relative displacement after test (Δδ = δ2-δ1 was also strongly lower than the symbol of the fatigue test failure index of this specific series (0.5mm in the high cycle fatigue regime. The ultimate tension failures mode after fatigue tests in all tested samples take place in the concrete anchorage zone. The reduction range of the ultimate tensile strength properties of the anchorage system was not obvious, and the concrete was seen to be the weakest link of the system.

  14. Laser device

    Science.gov (United States)

    Scott, Jill R.; Tremblay, Paul L.

    2008-08-19

    A laser device includes a virtual source configured to aim laser energy that originates from a true source. The virtual source has a vertical rotational axis during vertical motion of the virtual source and the vertical axis passes through an exit point from which the laser energy emanates independent of virtual source position. The emanating laser energy is collinear with an orientation line. The laser device includes a virtual source manipulation mechanism that positions the virtual source. The manipulation mechanism has a center of lateral pivot approximately coincident with a lateral index and a center of vertical pivot approximately coincident with a vertical index. The vertical index and lateral index intersect at an index origin. The virtual source and manipulation mechanism auto align the orientation line through the index origin during virtual source motion.

  15. "Distinvar" device

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    The alignment of one of the accelerator magnets being checked by the AR Division survey group. A "distinvar" device, invented by the group, using calibrated invar wires stretched between the fixed survey pillar (on the left) and a fixed point on the magnet. In two days it is thus possible to measure the alignment of the 100 magnets with an accuracy better than 1/10.

  16. Schedules of Controlled Substances: Temporary Placement of ortho-Fluorofentanyl, Tetrahydrofuranyl Fentanyl, and Methoxyacetyl Fentanyl Into Schedule I. Temporary amendment; temporary scheduling order.

    Science.gov (United States)

    2017-10-26

    The Administrator of the Drug Enforcement Administration is issuing this temporary scheduling order to schedule the synthetic opioids, N-(2-fluorophenyl)-N-(1-phenethylpiperidin-4-yl)propionamide (ortho-fluorofentanyl or 2-fluorofentanyl), N-(1-phenethylpiperidin-4-yl)-N-phenyltetrahydrofuran-2-carboxamide (tetrahydrofuranyl fentanyl), and 2-methoxy-N-(1-phenethylpiperidin-4-yl)-N-phenylacetamide (methoxyacetyl fentanyl), into Schedule I. This action is based on a finding by the Administrator that the placement of ortho-fluorofentanyl, tetrahydrofuranyl fentanyl, and methoxyacetyl fentanyl into Schedule I of the Controlled Substances Act is necessary to avoid an imminent hazard to the public safety. As a result of this order, the regulatory controls and administrative, civil, and criminal sanctions applicable to Schedule I controlled substances will be imposed on persons who handle (manufacture, distribute, reverse distribute, import, export, engage in research, conduct instructional activities or chemical analysis, or possess), or propose to handle, ortho-fluorofentanyl, tetrahydrofuranyl fentanyl, and methoxyacetyl fentanyl.

  17. [Treatment of Class II malocclusion using Herbst appliance with headgear and rapid palatal expansion and straight wire appliance with implant anchorage].

    Science.gov (United States)

    Zhang, Xiao-jie; Zheng, Cang-shang; Zhang, Min

    2015-06-01

    To investigate the effects of early treatment of Class II malocclusion with Herbst appliance with headgear and rapid palatal expansion and straight wire appliance with implant anchorage. Twenty-five Chinese children (14 males, 11 females, aged from 10-12 years with an average age of 10.5 years) were treated with Herbst appliance with headgear and rapid palatal expansion for 6 months. Then they were further treated with straight wire appliance with implant anchorage. Cephalometric data pre- and post-treatment were measured and analysed. Multiple correlation analysis was performed with SPSS13.0 software package. Compared with pretreatment, as angle SNB (4.2800±1.4000)° and as angle NP-FH (3.5600±1.0440)° increased posttreatment. as angle SNA (0.5600±0.8206)°, as angle ANB (4.7600±1.2000)°, as angle U1-NA (11.9200±1.4411)° and as angle U1-SN (13.1600±1.7720)° decreased posttreatment (Pheadgear and rapid palatal expansion. The maxillary dentition is significantly retracted by fixed appliance with implant anchorage and the skeletal pattern of patients is significantly improved.

  18. In vitro Analysis of Cytotoxicity of Temporary Resilient Relining Materials.

    Science.gov (United States)

    Caldas, Isleine P; Scelza, Miriam Z; Gallito, Marco A; Alves, Gutemberg; Silva, Licínio

    2016-06-01

    The aim of this study is to evaluate the in vitro response of human gingival fibroblasts in primary cultures to two materials for temporary relining of dentures: Temporary Soft (TDV, Brazil) and Trusoft (Bosworth, USA) for 24 hours, 7 and 30 days by using a multi-parametric analysis. Each material sample (TDV, TS, Polystyrene, Latex) was prepared and incubated in a culture medium for 1, 7, and 30 days at 37°C. Human gingival fibroblasts were exposed to the extracts and cell viability was evaluated by a multi-parametric assay, which allowed sequential analysis of mitochondrial activity (XTT), membrane integrity [neutral red (NR)], and cell density [crystal violet dye exclusion (CVDE)] in the same cells. Analysis of variance (ANOVA) was used to test the interactions of the three sources of variation (material, test method, and time) with the proportions of viable cells for each relining material. Both evaluated materials (TDV and TS) had low cytotoxic effects during 1, 7, and 30 days after manipulation of the material, as assessed by all three methods used. A statistical difference was found when comparing the negative control group (latex fragments) with the other groups, which showed high toxicity and low percentage of cell viability in all tests used. There was no significant difference among other materials (p > 0.05). Low cytotoxicity levels were detected by representatives of the major groups of temporary prosthetic relining materials, as evaluated by multiple cellular viability parameters in human fibroblasts. There are various soft materials on the market for relining prostheses; however, the effects of these materials on tissues need to be clarified to avoid problems for patients.

  19. Early closure of temporary ileostomy--the EASY trial

    DEFF Research Database (Denmark)

    Danielsen, Anne Kjaergaard; Correa-Marinez, Adiela; Angenete, Eva

    2011-01-01

    ), a randomised controlled trial, is a prospective randomised controlled multicentre study which is performed within the framework of the Scandinavian Surgical Outcomes Research Group (http://www.ssorg.net/) and plans to include 200 patients from Danish and Swedish hospitals. The primary end-point of the study......;months after surgery (stoma creation). Discussion The aim of the EASY trial is to evaluate the efficiency of early reversal of temporary ileostomy after surgery for rectal cancer versus late reversal. The EASY trial is expected to have a huge impact on patient safety as well as an improvement in patient......-reported outcome. Clinical trials identifier NCT01287637....

  20. Institutional Logics in Inter-institutional Temporary Organizations

    DEFF Research Database (Denmark)

    Pemsel, Sofia; Söderlund, Jonas

    -cognitive, normative, and regulative – are unfolding and evolving in such contexts. The case study addresses the integration and disintegration of logics and normative orders in an ongoing process characterized by the co-mingling, co-existence, creation and resolutions of hybrid logics and creation of institutional...... exceptions throughout the life of the studied temporary organization. In that respect, this paper contributes with a more nuanced view on the evolution, dynamics, and co-existence of pressures from multiple institutional demands at the organizational level....

  1. Early closure of temporary ileostomy--the EASY trial

    DEFF Research Database (Denmark)

    Danielsen, Anne Kjaergaard; Correa-Marinez, Adiela; Angenete, Eva

    2011-01-01

    ), a randomised controlled trial, is a prospective randomised controlled multicentre study which is performed within the framework of the Scandinavian Surgical Outcomes Research Group (http://www.ssorg.net/) and plans to include 200 patients from Danish and Swedish hospitals. The primary end-point of the study......;months after surgery (stoma creation). Discussion The aim of the EASY trial is to evaluate the efficiency of early reversal of temporary ileostomy after surgery for rectal cancer versus late reversal. The EASY trial is expected to have a huge impact on patient safety as well as an improvement in patient-reported...

  2. Protein interacting with C kinase 1 suppresses invasion and anchorage-independent growth of astrocytic tumor cells

    Science.gov (United States)

    Cockbill, Louisa M. R.; Murk, Kai; Love, Seth; Hanley, Jonathan G.

    2015-01-01

    Astrocytic tumors are the most common form of primary brain tumor. Astrocytic tumor cells infiltrate the surrounding CNS tissue, allowing them to evade removal upon surgical resection of the primary tumor. Dynamic changes to the actin cytoskeleton are crucial to cancer cell invasion, but the specific mechanisms that underlie the particularly invasive phenotype of astrocytic tumor cells are unclear. Protein interacting with C kinase 1 (PICK1) is a PDZ and BAR domain–containing protein that inhibits actin-related protein 2/3 (Arp2/3)-dependent actin polymerization and is involved in regulating the trafficking of a number of cell-surface receptors. Here we report that, in contrast to other cancers, PICK1 expression is down-regulated in grade IV astrocytic tumor cell lines and also in clinical cases of the disease in which grade IV tumors have progressed from lower-grade tumors. Exogenous expression of PICK1 in the grade IV astrocytic cell line U251 reduces their capacity for anchorage-independent growth, two-dimensional migration, and invasion through a three-dimensional matrix, strongly suggesting that low PICK1 expression plays an important role in astrocytic tumorigenesis. We propose that PICK1 negatively regulates neoplastic infiltration of astrocytic tumors and that manipulation of PICK1 is an attractive possibility for therapeutic intervention. PMID:26466675

  3. Treatment effects of occipitomental anchorage appliance of maxillary protraction combined with chincup traction in children with Class III malocclusion.

    Science.gov (United States)

    Lin, Hsiang-Chien; Chang, Hong-Po; Chang, Hsin-Fu

    2007-05-01

    Little information related to the treatment effects of the occipitomental anchorage (OMA) appliance of maxillary (Mx) protraction combined with chincup traction is available. The aim of this study was to investigate the treatment effects of the OMA orthopedic appliance on patients with Class III malocclusion. Pretreatment and post-treatment cephalometric records of 20 consecutively treated patients with Class III malocclusions were evaluated and compared with a matched sample of untreated Class III control subjects. The OMA appliance is effective for correcting skeletal Class III malocclusion in growing children. The treatment effects of this orthopedic appliance were considered to be from both skeletal and dentoalveolar changes. The skeletal effects were mainly obtained by stimulating forward growth of the Mx complex with negligible rotation of the Mx plane and restraining forward advancement of the mandible (Mn) with backward and downward rotation of the Mn plane. The observed dentoalveolar effects were mostly due to the labial tipping movement of the Mx incisors. Our results suggest that the OMA orthopedic appliance can correct the mesial jaw relationship and negative incisal over jet. This appliance is effective for correcting skeletal Class III malocclusion with both midface deficiency and Mn prognathism in growing children.

  4. Chlamydia Induces Anchorage Independence in 3T3 Cells and Detrimental Cytological Defects in an Infection Model

    Science.gov (United States)

    Knowlton, Andrea E.; Fowler, Larry J.; Patel, Rahul K.; Wallet, Shannon M.; Grieshaber, Scott S.

    2013-01-01

    Chlamydia are Gram negative, obligate intracellular bacterial organisms with different species causing a multitude of infections in both humans and animals. Chlamydia trachomatis is the causative agent of the sexually transmitted infection (STI) Chlamydia, the most commonly acquired bacterial STI in the United States. Chlamydial infections have also been epidemiologically linked to cervical cancer in women co-infected with the human papillomavirus (HPV). We have previously shown chlamydial infection results in centrosome amplification and multipolar spindle formation leading to chromosomal instability. Many studies indicate that centrosome abnormalities, spindle defects, and chromosome segregation errors can lead to cell transformation. We hypothesize that the presence of these defects within infected dividing cells identifies a possible mechanism for Chlamydia as a cofactor in cervical cancer formation. Here we demonstrate that infection with Chlamydia trachomatis is able to transform 3T3 cells in soft agar resulting in anchorage independence and increased colony formation. Additionally, we show for the first time Chlamydia infects actively replicating cells in vivo. Infection of mice with Chlamydia results in significantly increased cell proliferation within the cervix, and in evidence of cervical dysplasia. Confocal examination of these infected tissues also revealed elements of chlamydial induced chromosome instability. These results contribute to a growing body of data implicating a role for Chlamydia in cervical cancer development and suggest a possible molecular mechanism for this effect. PMID:23308295

  5. Cell aggregation induces phosphorylation of PECAM-1 and Pyk2 and promotes tumor cell anchorage-independent growth

    Directory of Open Access Journals (Sweden)

    Yu Qiang

    2010-01-01

    Full Text Available Abstract Background Apoptosis caused by inadequate or inappropriate cell-matrix interactions is defined as anoikis. Although transformed cells are known to be anoikis-resistant, the underlying mechanisms have not been well understood. We investigated the mechanisms of anoikis resistance of tumor cells. Results We observed that cell aggregation in suspension promoted cell survival and proliferation. We demonstrated a correlation between tumor cell aggregation in suspension and cell growth in soft agar. Analysis of tyrosine kinase-mediated cell survival and growth signaling pathways revealed increased levels of tyrosine-phosphorylation of PECAM-1 and Pyk2 in cell aggregates. We also showed that PECAM-1 and Pyk2 physically interact with each other, and that PECAM-1 carrying a deletion of exons 11-16 could no longer bind to Pyk2. Furthermore, RNA interference-mediated reduction of Pyk2 and PECAM-1 protein levels reduced cell aggregation and inhibited the growth of tumor cells in soft agar. Conclusions The data demonstrated that Pyk2 and PECAM-1 were critical mediators of both anchorage-independent growth and anoikis resistance in tumor cells.

  6. Indirect usage of miniscrew anchorage to intrude overerupted mandibular incisors in a Class II patient with a deep overbite.

    Science.gov (United States)

    Ishihara, Yoshihito; Kuroda, Shingo; Sugawara, Yasuyo; Balam, Tarek A; Takano-Yamamoto, Teruko; Yamashiro, Takashi

    2013-04-01

    Vertical dentoalveolar discrepancies are a common problem in orthodontic patients but are often difficult to treat with traditional mechanics. This case report illustrates the successful treatment of overerupted mandibular incisors via the indirect use of miniscrew anchorage. A woman (age, 22 years 9 months) had chief complaints of maxillary incisor protrusion and crooked teeth. An excessive curve of Spee caused by elongation of the mandibular incisors was also found. The patient was diagnosed with a severe Class II Division 1 malocclusion and a deep overbite. After extraction of the mandibular first premolars and the subsequent leveling phase, the elongated incisors were intruded with a novel method, which involved the combined use of sectional archwires and miniscrews placed in the premolar areas. After the procedure, the mandibular incisors had been intruded by 6.5 mm with no undesirable side effects. The total active treatment period was 42 months. The resultant occlusion and satisfactory facial profile were maintained after 30 months of retention. Our novel intrusion approach shows potential for correcting a deep overbite. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  7. Chlamydia induces anchorage independence in 3T3 cells and detrimental cytological defects in an infection model.

    Directory of Open Access Journals (Sweden)

    Andrea E Knowlton

    Full Text Available Chlamydia are gram negative, obligate intracellular bacterial organisms with different species causing a multitude of infections in both humans and animals. Chlamydia trachomatis is the causative agent of the sexually transmitted infection (STI Chlamydia, the most commonly acquired bacterial STI in the United States. Chlamydial infections have also been epidemiologically linked to cervical cancer in women co-infected with the human papillomavirus (HPV. We have previously shown chlamydial infection results in centrosome amplification and multipolar spindle formation leading to chromosomal instability. Many studies indicate that centrosome abnormalities, spindle defects, and chromosome segregation errors can lead to cell transformation. We hypothesize that the presence of these defects within infected dividing cells identifies a possible mechanism for Chlamydia as a cofactor in cervical cancer formation. Here we demonstrate that infection with Chlamydia trachomatis is able to transform 3T3 cells in soft agar resulting in anchorage independence and increased colony formation. Additionally, we show for the first time Chlamydia infects actively replicating cells in vivo. Infection of mice with Chlamydia results in significantly increased cell proliferation within the cervix, and in evidence of cervical dysplasia. Confocal examination of these infected tissues also revealed elements of chlamydial induced chromosome instability. These results contribute to a growing body of data implicating a role for Chlamydia in cervical cancer development and suggest a possible molecular mechanism for this effect.

  8. Flexural strength of mini-implants developed for Herbst appliance skeletal anchorage: a study in Minipigs br1 cadavers

    Directory of Open Access Journals (Sweden)

    Klaus Barretto Lopes

    2013-12-01

    Full Text Available OBJECTIVE: The present study was designed to verify if mini-implant prototypes (MIP developed for Herbst appliance anchorage are capable of withstanding orthopedic forces, and to determine whether the flexural strength of these MIP varies depending on the site of insertion (maxilla and mandible. METHODS: Thirteen MIP were inserted in three minipig cadavers (six in the maxilla and seven in the mandible. The specimens were prepared and submitted to mechanical testing. The mean and standard deviation were calculated for each region. A two-way Student's t test was used to compare the strength between the sites. A one-way Student's t test was performed to test the hypothesis. Orthopedic forces above 1.0 kgf were considered. RESULTS: The MIP supported flexural strength higher than 1.0 kgf (13.8 ± 2.3 Kg, in the posterior region of the maxilla and 20.5 ± 5.2 Kg in the anterior region of the mandible with a significantly lower flexural strength in the anterior region of the mandible (P < 0.05. CONCLUSION: The MIP are capable of withstanding orthopedic forces, and are more resistant in the anterior region of the mandible than in the posterior region of the maxilla in Minipigs br1 cadavers.

  9. Short glass fiber-reinforced composite with a semi-interpenetrating polymer network matrix for temporary crowns and bridges.

    Science.gov (United States)

    Garoushi, Sufyan K; Vallittu, Pekka K; Lassila, Lippo V J

    2008-01-01

    The purpose of this study was to investigate the reinforcement effect of short E-glass fiber fillers on some mechanical properties of temporary crown and bridge (TCB) composite resin with a semi-interpenetrating polymer network (semi-IPN). Experimental temporary fiber reinforced (TFC) composite resin was prepared by mixing 15 wt% of short E-glass fibers (3 mm in length) with a 35 wt% of semi-IPN-resin (dual or chemical cure) with 50 wt% of silane treated particulate silica fillers using a high speed mixing device. Temporary crowns (n=6) and test specimens (2 x 2 x 25 mm3) (n=6) were made from the experimental TFC and conventional TCB composite (control, Protemp Garant, 3M-ESPE, St. Paul, MN, USA). A three-point bending test was done according to ISO standard 10477, and a compression loading test was carried out using a steel ball (Ø 3.0 mm) with a speed of 1.0 mm/min until fracture occurred. The degree of monomer conversion (DC%) of both composites was determined by Fourier transfer infrared (FTIR) spectrometry. The analysis of variance (ANOVA) revealed both dual and chemical cure experimental TFC composite resins had statistically significant (p<0.05) higher flexural strengths (117 and 99 MPa, respectively) and compressive load-bearing capacity (730 and 623 N, respectively) compared to the control TCB composite resin (72 MPa, 549 N). The use of short fiber fillers with semi-IPN polymer matrix yielded an improved mechanical performance compared to a conventional TCB composite resin.

  10. Scalable devices

    KAUST Repository

    Krüger, Jens J.

    2014-01-01

    In computer science in general and in particular the field of high performance computing and supercomputing the term scalable plays an important role. It indicates that a piece of hardware, a concept, an algorithm, or an entire system scales with the size of the problem, i.e., it can not only be used in a very specific setting but it\\'s applicable for a wide range of problems. From small scenarios to possibly very large settings. In this spirit, there exist a number of fixed areas of research on scalability. There are works on scalable algorithms, scalable architectures but what are scalable devices? In the context of this chapter, we are interested in a whole range of display devices, ranging from small scale hardware such as tablet computers, pads, smart-phones etc. up to large tiled display walls. What interests us mostly is not so much the hardware setup but mostly the visualization algorithms behind these display systems that scale from your average smart phone up to the largest gigapixel display walls.

  11. Physics of semiconductor devices

    Energy Technology Data Exchange (ETDEWEB)

    Prew, B.A.

    1975-09-01

    The properties of semiconductors which make them important in the electronic devices industry, and how these properties are controlled by doping, are described. The physics and applications of p-n and other junction devices, and of bulk effect devices are discussed. Avalanche devices, optical devices, solar cells, Schottky barriers, MOS devices, heterojunctions, photoconductors, and transferred electron devices are considered.

  12. The Challenges Encountered by Immigrant-Serving Agencies in Addressing the Health of Temporary Foreign Workers.

    Science.gov (United States)

    Salami, Bukola; Kirova, Anna; Hegadoren, Kathleen; Meherali, Salima; Chiu, Yvonne; Nsaliwa, Christina

    2016-01-01

    This study sought to examine the challenges encountered by immigrant-serving agencies in meeting the health needs of temporary foreign workers and their families in one Canadian province. The authors interviewed 11 representatives of immigrant-serving agencies and two policy makers. Some of the challenges that agencies face in delivering programs and services for temporary foreign workers and their families include the time required to build trust with this population, temporary foreign workers' reluctance to use services due to fear that it will affect their immigration status, and the emotional labor associated with working with temporary foreign workers.

  13. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  14. Tolerance of herbaceous summer legumes of temporary waterlogging

    Directory of Open Access Journals (Sweden)

    Elsa M. Ciotti

    2014-09-01

    Full Text Available A greenhouse study to evaluate adaptation of 4 herbaceous summer legumes to temporary waterlogging was conducted.  Species evaluated were Desmanthus virgatus and Aeschynomene americana in their vegetative stage, and Macroptilium lathyroides and M. atropurpureum in both vegetative and reproductive stages.  The experimental design was randomized blocks with 5 replications and treatments were:  T0, control; T1, saturation by capillary movement placing pots in buckets of 5 L with 10 cm of permanent water; and T2, flooding, placing pots in buckets of 10 L and a layer of water 5 cm above the soil.  The duration of the water treatments was 7 days. Waterlogging did not affect shoot or root biomass production nor nodulation in A. americana, whereas D. virgatus had its highest dry matter production in saturated soil (T1.  In M. lathyroides flooding tolerance was more evident in the reproductive than in the vegetative stage, probably due to more production of adventitious roots and formation of aerenchymatic tissue.  Macroptilium atropurpureum showed adaptation to temporary flooding.  Survival and quick recovery of these species would confirm their potential as forages for temporarily waterlogged soils.Keywords: Forage legumes, flooding, Aeschynomene americana, Desmanthus virgatus, Macroptilium lathyroides, Northeast Argentina.DOI: 10.17138/TGFT(2278-286

  15. Microleakage of different temporary filling materials in primary teeth.

    Science.gov (United States)

    Odabas, Mesut Enes; Tulunoglu, Ozlem; Ozalp, Serife Ozdemir; Bodur, Haluk

    2009-01-01

    The aim of this study was to compare the sealing properties of IRM, Coltosol, Cavit G, Adhesor and Clip, which used as temporary filling material in coronal access openings in extracted human primary teeth. Standardized access cavities of 2 x 2 mm were prepared in the eighty-four, caries-free human primary anterior teeth. The teeth were divided randomly into five groups of 16 teeth each. Temporary restorative materials Group A: IRM (Dentsply), Group B: Coltosol (Coltone), Group C: Cavit G (3M), Group D: Adhesor (Spofa Dental) and Group E: Clip (Voco) were applied according to the manufacturer's directions. The specimens were immersed silver nitrate and placed in film developer under fluorescent for 24 hours. The sectioned specimens were evaluated under a digital microscope at x 20 magnifications and blindly scored for microleakage. Clip presented the least microleakage value whereas; Adhesor and IRM presented the higher microleakage values. There were statistically significant differences between Clip and the others groups, while there were no statistically significant differences in microleakage between IRM, Adhesor, Coltosol and Cavit G. However the leakage scores of Clip and Cavit G were congruent (p = 0.454). Amongst the five materials, Clip exhibited a better sealing ability.

  16. Defining chemical status of a temporary Mediterranean River.

    Science.gov (United States)

    Skoulikidis, Nikolaos Th

    2008-07-01

    Although the majority of rivers and streams in the Mediterranean area are temporary, no particular attention is being paid for such systems in the Water Framework Directive (WFD). A typical temporal Mediterranean river, draining an intensively cultivated basin, was assessed for its chemical status. Elevated concentrations of nitrates and salts in river water as well as nutrients and heavy metals in river sediments have been attributed to agricultural land uses and practices and point sources of organic pollution. A scheme for the classification of the river's chemical status (within the ecological quality classification procedure) was applied by combining pollution parameters in groups according to related pressures. In light of the temporal hydrological regime and anthropogenic impacts, sediment chemical quality elements were considered, in addition to hydrochemical ones. Despite the extensive agricultural activities in the basin, the majority of the sites examined showed a good quality and only three of them were classified as moderate. For the classification of the chemical quality of temporary water bodies, there is a need to develop ecologically relevant salinity and sediment quality standards.

  17. The profound precariousness of work through temporary work agency

    Directory of Open Access Journals (Sweden)

    Mihaela-Emilia Marica

    2016-12-01

    Full Text Available The increase in the number of atypical work contracts in the field of industry relationships, as part of a major European trend towards gaining more flexibility in the labour market, is significant and cannot be overlooked in most member countries of the European Union. This finding is corroborated by the recent surveys conducted across Europe, that reveal the prevalence of these flexible ways of organizing work, over the archetypal template of the individual work contract. However, this range of atypical contractual arrangements and the great number of versions and subcategories they include, are describing a number of negative features that seem to characterize these new forms of employment. Since the field of atypical employment is complex and we cannot analyse the incidence of these negative effects for all the atypical methods of employment, in the following article we will limit ourselves to explore the pressing issues related to the system of temporary work through work agencies. As we shall see, all aspects of the salary field, of health and safety at work and the level of insecurity and instability of labour through temporary work agency reveals a strong character associated with this kind of precarious employment.

  18. Laser, light, and energy devices for cellulite and lipodystrophy.

    Science.gov (United States)

    Peterson, Jennifer D; Goldman, Mitchel P

    2011-07-01

    Cellulite affects all races, and it is estimated that 85% of women older than 20 years have some degree of cellulite. Many currently accepted cellulite therapies target deficiencies in lymphatic drainage and microvascular circulation. Devices using radiofrequency, laser, and light-based energies, alone or in combination and coupled frequently with tissue manipulation, are available for improving cellulite. Laser assisted liposuction may improve cellulite appearance. Although improvement using these devices is temporary, it may last several months. Patients who want smoother skin with less visible cellulite can undergo a series of treatments and then return for additional treatments as necessary. Copyright © 2011 Elsevier Inc. All rights reserved.

  19. CLOSURE DEVICE

    Science.gov (United States)

    Linzell, S.M.; Dorcy, D.J.

    1958-08-26

    A quick opening type of stuffing box employing two banks of rotatable shoes, each of which has a caraming action that forces a neoprene sealing surface against a pipe or rod where it passes through a wall is presented. A ring having a handle or wrench attached is placed eccentric to and between the two banks of shoes. Head bolts from the shoes fit into slots in this ring, which are so arranged that when the ring is rotated a quarter turn in one direction the shoes are thrust inwardly to cramp the neopnrene about the pipe, malting a tight seal. Moving the ring in the reverse direction moves the shoes outwardly and frees the pipe which then may be readily removed from the stuffing box. This device has particular application as a closure for the end of a coolant tube of a neutronic reactor.

  20. Use of temporary nursing staff and nosocomial infections in intensive care units.

    Science.gov (United States)

    Bae, Sung-Heui; Brewer, Carol S; Kelly, Maureen; Spencer, Alexandra

    2015-04-01

    To examine the nature and prevalence of the use of temporary nursing staff in intensive care units and relationships between the use of temporary nursing staff and the occurrence of nosocomial infections (central line-associated blood stream infections and ventilator-associated pneumonia). Hiring temporary nurses raises controversial issues with respect to nurse staffing, care processes and patient outcomes, yet empirical findings regarding the use of temporary nurses are mixed. Whether adverse patient outcomes in intensive care units are related to the use of temporary nursing staff remains unexamined. A retrospective longitudinal design was used. Data were collected monthly from 12 intensive care units at six hospitals; 144 ICU-month data points were used for the analysis. Chi-square, anova and logit regression models were used to examine the research questions. The intensive care units used higher levels of temporary nursing staff, but the use of temporary nursing staff was not significantly associated with nosocomial infections. Nurses' perceptions regarding staffing and resource adequacy were significantly associated with nosocomial infections. No evidence was found to link the use of temporary nursing staff and nosocomial infections. Instead, nurses' perceptions of staffing adequacy were related to nosocomial infections. Given the greater use of temporary nursing staff in intensive care units, nurse managers in intensive care units need to monitor the levels of temporary nurse staffing and develop a systematic approach for hospitals to assist in these nurses' adjustment, which can reduce the burden of both temporary and permanent intensive care unit nurses. In addition to quantitative measures of nurse staffing, nurses' perceptions regarding staffing adequacy can be used to measure nurse staffing in relation to adverse patient outcomes. © 2014 John Wiley & Sons Ltd.

  1. Laser-Modified Surface Enhances Osseointegration and Biomechanical Anchorage of Commercially Pure Titanium Implants for Bone-Anchored Hearing Systems.

    Science.gov (United States)

    Shah, Furqan A; Johansson, Martin L; Omar, Omar; Simonsson, Hanna; Palmquist, Anders; Thomsen, Peter

    2016-01-01

    Osseointegrated implants inserted in the temporal bone are a vital component of bone-anchored hearing systems (BAHS). Despite low implant failure levels, early loading protocols and simplified procedures necessitate the application of implants which promote bone formation, bone bonding and biomechanical stability. Here, screw-shaped, commercially pure titanium implants were selectively laser ablated within the thread valley using an Nd:YAG laser to produce a microtopography with a superimposed nanotexture and a thickened surface oxide layer. State-of-the-art machined implants served as controls. After eight weeks' implantation in rabbit tibiae, resonance frequency analysis (RFA) values increased from insertion to retrieval for both implant types, while removal torque (RTQ) measurements showed 153% higher biomechanical anchorage of the laser-modified implants. Comparably high bone area (BA) and bone-implant contact (BIC) were recorded for both implant types but with distinctly different failure patterns following biomechanical testing. Fracture lines appeared within the bone ~30-50 μm from the laser-modified surface, while separation occurred at the bone-implant interface for the machined surface. Strong correlations were found between RTQ and BIC and between RFA at retrieval and BA. In the endosteal threads, where all the bone had formed de novo, the extracellular matrix composition, the mineralised bone area and osteocyte densities were comparable for the two types of implant. Using resin cast etching, osteocyte canaliculi were observed directly approaching the laser-modified implant surface. Transmission electron microscopy showed canaliculi in close proximity to the laser-modified surface, in addition to a highly ordered arrangement of collagen fibrils aligned parallel to the implant surface contour. It is concluded that the physico-chemical surface properties of laser-modified surfaces (thicker oxide, micro- and nanoscale texture) promote bone bonding which

  2. Laser-Modified Surface Enhances Osseointegration and Biomechanical Anchorage of Commercially Pure Titanium Implants for Bone-Anchored Hearing Systems.

    Directory of Open Access Journals (Sweden)

    Furqan A Shah

    Full Text Available Osseointegrated implants inserted in the temporal bone are a vital component of bone-anchored hearing systems (BAHS. Despite low implant failure levels, early loading protocols and simplified procedures necessitate the application of implants which promote bone formation, bone bonding and biomechanical stability. Here, screw-shaped, commercially pure titanium implants were selectively laser ablated within the thread valley using an Nd:YAG laser to produce a microtopography with a superimposed nanotexture and a thickened surface oxide layer. State-of-the-art machined implants served as controls. After eight weeks' implantation in rabbit tibiae, resonance frequency analysis (RFA values increased from insertion to retrieval for both implant types, while removal torque (RTQ measurements showed 153% higher biomechanical anchorage of the laser-modified implants. Comparably high bone area (BA and bone-implant contact (BIC were recorded for both implant types but with distinctly different failure patterns following biomechanical testing. Fracture lines appeared within the bone ~30-50 μm from the laser-modified surface, while separation occurred at the bone-implant interface for the machined surface. Strong correlations were found between RTQ and BIC and between RFA at retrieval and BA. In the endosteal threads, where all the bone had formed de novo, the extracellular matrix composition, the mineralised bone area and osteocyte densities were comparable for the two types of implant. Using resin cast etching, osteocyte canaliculi were observed directly approaching the laser-modified implant surface. Transmission electron microscopy showed canaliculi in close proximity to the laser-modified surface, in addition to a highly ordered arrangement of collagen fibrils aligned parallel to the implant surface contour. It is concluded that the physico-chemical surface properties of laser-modified surfaces (thicker oxide, micro- and nanoscale texture promote bone

  3. Novel 3-D cell culture system for in vitro evaluation of anticancer drugs under anchorage-independent conditions.

    Science.gov (United States)

    Aihara, Ayako; Abe, Natsuki; Saruhashi, Koichiro; Kanaki, Tatsuro; Nishino, Taito

    2016-12-01

    Anticancer drug discovery efforts have used 2-D cell-based assay models, which fail to forecast in vivo efficacy and result in a lower success rate of clinical approval. Recent 3-D cell culture models are expected to bridge the gap between 2-D and in vivo models. However, 3-D cell culture methods that are available for practical anticancer drug screening have not yet been fully attained. In this study, we screened several polymers for their ability to suspend cells or cell spheroids homogeneously in a liquid medium without changing the viscosity behavior, and identified gellan gum (FP001), as the most potent polymer. FP001 promoted cell dispersion in the medium and improved the proliferation of a wide range of cancer cell lines under low attachment conditions by inhibiting the formation of large-sized spheroids. In addition, cancer cells cultured with FP001-containing medium were more susceptible to inhibitors of epidermal growth factor (EGF) signaling than those cultured under attachment conditions. We also showed that ligands of the EGF receptor family clearly enhance proliferation of SKOV3 ovarian carcinoma cells under anchorage-independent conditions with FP001. Consistent with this result, the cells grown with FP001 showed higher EGF receptor content compared with cells cultured under attachment conditions. In conclusion, we developed a novel 3-D cell culture system that is available for high throughput screening of anticancer agents, and is suitable for evaluation of molecular-targeted anticancer drugs. Three-dimensional cell culture using FP001 will be of value in the development of useful technologies for anticancer drug discovery. © 2016 The Authors. Cancer Science published by John Wiley & Sons Australia, Ltd on behalf of Japanese Cancer Association.

  4. Efficacy of transpalatal arch as an anchorage reinforcing unit during orthodontic space closure: A three-dimensional finite element study

    Directory of Open Access Journals (Sweden)

    Vishal Shrishail Kudagi

    2017-01-01

    Full Text Available Background and Objectives: Connecting the contralateral upper molars by means of a transpalatal arch (TPA is thought to decrease the tendency of the molars to move mesially in response to orthodontic force (i.e., provide orthodontic anchorage. This study was hence conducted to investigate the effects of the TPA on the displacement of the molars and stresses generated in the periodontium during orthodontic tooth movement using the finite element method (FEM. Materials and Methods: A three-dimensional (3D model was generated using medical modeling software (Mimics using the computed tomography slice images of the skull which were obtained at a slice thickness of 1 mm. From this, the finite element model was built using HyperMesh and analysis was performed using PATRAN software (MSC Software Corporation, 4675 MacArthur Court, Newport Beach, California 92660. The 3D finite element models were fabricated in two versions such as maxillary first molars including their associated periodontal ligament and alveolar bone one with TPA and another without TPA. Both were subjected to orthodontic forces, and the resultant stress patterns and displacements between the models with and without TPA were determined. Results: The stress and displacement plots in this study failed to show any significant differences in stress and displacement within the periodontium of molars, between the two models – one with TPA and the other without, in response to the orthodontic force. Interpretation and Conclusion: The results of the current finite element analysis, therefore, suggest that the presence of a TPA brings about no change in the initial dental and periodontal stress distribution and displacement.

  5. Ripening of clayey dredged sediments during temporary upland disposal, A Bioremediation technique.

    NARCIS (Netherlands)

    Vermeulen, J.; Grotenhuis, J.T.C.; Joziasse, J.; Rulkens, W.H.

    2003-01-01

    Background and Goal. In the Netherlands about 40 million m3 of sediment has to be dredged annually for both maintenance and environmental reasons. Temporary upland disposal is the most widely adopted alternative for dredged sediments worldwide. For good management of temporary disposal sites,

  6. 42 CFR 488.56 - Temporary waivers applicable to skilled nursing facilities.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Temporary waivers applicable to skilled nursing... PROCEDURES Special Requirements § 488.56 Temporary waivers applicable to skilled nursing facilities. (a... skilled nursing facility to engage the services of a registered nurse more than 40 hours a week, the...

  7. 26 CFR 1.103(n)-6T - Determinations of population (temporary).

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Determinations of population (temporary). 1.103....103(n)-6T Determinations of population (temporary). Q-1: What is the proper method for determining population? A-1: All determinations of population must be made with respect to any calendar year on the basis...

  8. Temporary Work in Western Europe: Threat or Complement to Permanent Employment?

    Science.gov (United States)

    Bronstein, A. S.

    1991-01-01

    The rapid postwar rise of temporary employment is outlined, including legitimate and less legitimate manifestations, views of unions and employers, advantages and disadvantages. The legal status of such work in various countries and the problems arising from the triangular relationship between worker, temporary agency, and employer are addressed.…

  9. Temporary Work in Transnational Labor Regulation: SER-Centrism and the Risk of Exacerbating Gendered Precariousness

    Science.gov (United States)

    Vosko, Leah F.

    2008-01-01

    This article explores the transnational regulation of temporary work. Analyzing the terms of the EU "Directive on Fixed-Term Work (1999), the ILO "Convention on Private Employment Agencies" (1997), the ILO "Recommendation on the Employment Relationship" (2006), and a draft EU Directive on "Temporary Agency Work"…

  10. 38 CFR 21.6001 - Temporary vocational training program for certain pension recipients.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Temporary vocational training program for certain pension recipients. 21.6001 Section 21.6001 Pensions, Bonuses, and Veterans... Program of Vocational Training for Certain New Pension Recipients General § 21.6001 Temporary vocational...

  11. 75 FR 6883 - Temporary Agricultural Employment of H-2A Aliens in the United States

    Science.gov (United States)

    2010-02-12

    ... Temporary Agricultural Employment of H-2A Aliens in the United States; Final Rule #0;#0;Federal Register... Temporary Agricultural Employment of H-2A Aliens in the United States AGENCY: Employment and Training... services involved in the petition; and (B) The employment of the alien in such labor or services will not...

  12. 8 CFR 1244.5 - Temporary treatment benefits for eligible aliens.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Temporary treatment benefits for eligible aliens. 1244.5 Section 1244.5 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT... § 1244.5 Temporary treatment benefits for eligible aliens. (a) Prior to the registration period. Prior to...

  13. 75 FR 383 - Canned Pacific Salmon Deviating From Identity Standard; Extension of Temporary Permit for Market...

    Science.gov (United States)

    2010-01-05

    ..., Drug, and Cosmetic Act (21 U.S.C. 341). The permit covers limited interstate marketing tests of a... optional forms of pack provided in Sec. 161.170(a)(3), this temporary marketing permit provides for an... Fisheries, LLC, requested that its temporary marketing permit be extended to allow for additional time for...

  14. 76 FR 20008 - Notice of Temporary Concession Contract for Assateague Island National Seashore, MD

    Science.gov (United States)

    2011-04-11

    ... merchandise and limited pre-packaged food and beverage. This action is necessary to avoid interruption of... National Park Service Notice of Temporary Concession Contract for Assateague Island National Seashore, MD AGENCY: National Park Service, Interior. ACTION: Notice of proposed award of temporary concession...

  15. 26 CFR 1.923-1T - Temporary regulations; exempt foreign trade income.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Temporary regulations; exempt foreign trade... Temporary regulations; exempt foreign trade income. (a) Foreign trade income. Foreign trade income of a FSC... for illustrations of the computation of a FSC's foreign trade income, exempt foreign trade income and...

  16. Temporary contracts : Effect on job satisfaction and personal lives of recent PhD graduates

    NARCIS (Netherlands)

    Waaijer, C.J.F.; Belder, R.; Sonneveld, H.; Van, Bochove C.A.; Van, der Weijden I.C.M.

    2017-01-01

    In this study, we assess the effects of temporary employment on job satisfaction and the personal lives of recent PhD graduates. Temporary employment is becoming increasingly prevalent in many sectors, but has been relatively common in academia, especially for early career scientists. Labor market

  17. 26 CFR 1.410(a)-8T - Year of service; break in service (temporary).

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Year of service; break in service (temporary). 1...)-8T Year of service; break in service (temporary). (a)-(b) (c) Breaks in service. (1) (2) Employees...-year break in service under a plan which provides that after not more than 2 years of service each...

  18. 77 FR 47915 - Wheego Electric Cars, Inc.; Grant of Petition for Temporary Exemption From the Electronic...

    Science.gov (United States)

    2012-08-10

    ... National Highway Traffic Safety Administration Wheego Electric Cars, Inc.; Grant of Petition for Temporary... Stability Control Systems. SUMMARY: This notice grants the petition of Wheego Electric Cars, Inc. (Wheego... Electric Cars, Inc. (Wheego) submitted a petition dated August 15, 2011 asking the agency for a temporary...

  19. 20 CFR 655.1310 - Validity and scope of temporary labor certifications.

    Science.gov (United States)

    2010-04-01

    ... OF LABOR TEMPORARY EMPLOYMENT OF FOREIGN WORKERS IN THE UNITED STATES Labor Certification Process for Temporary Agricultural Employment in the United States (H-2A Workers) § 655.1310 Validity and scope of... workers, the area of intended employment, the specific occupation and duties, and the employer(s...

  20. Students, Temporary Workers and Co-Op Workers: An Experimental Investigation on Social Preferences

    Directory of Open Access Journals (Sweden)

    Davide Dragone

    2015-05-01

    Full Text Available We conduct an artefactual field experiment to compare the individual preferences and propensity to cooperate of three pools of subjects: Undergraduate students, temporary workers and permanent workers. We find that students are more selfish and contribute less than workers. Temporary and permanent contract workers have similar other-regarding preferences and display analogous contribution patterns in an anonymous Public Good Game.

  1. Assessment of the consequences in premature loss of the temporary lower molars.

    Science.gov (United States)

    Petcu, Ana; Bălan, Adriana; Gavrilă, Laura Maria Vasilca; Savin, Carmen

    2014-01-01

    The consequences of premature loss of temporary teeth are complex, both of functional and morphological order and the clinical presentation depends on multiple factors: the temporary tooth loss rate as compared with permanent tooth eruption sequence and the number and topography of teeth extracted, so the clinical form of edentulous, which can be frontal or lateral, symmetric or asymmetric, isolated or continuous.

  2. 76 FR 43236 - Federal Travel Regulation (FTR): Temporary Duty (TDY) Travel Allowances: Notice of Public Meeting

    Science.gov (United States)

    2011-07-20

    ... ADMINISTRATION 41 CFR Chapter 301 Federal Travel Regulation (FTR): Temporary Duty (TDY) Travel Allowances: Notice... Federal Travel Regulation (FTR) in an effort to streamline travel policies, increase travel efficiency and... pertain to Temporary Duty (TDY) Travel Allowances that include special conveyances, per diem and air...

  3. 76 FR 78739 - Agency Information Collection (Regulation on Application for Fisher Houses and Other Temporary...

    Science.gov (United States)

    2011-12-19

    ... AFFAIRS Agency Information Collection (Regulation on Application for Fisher Houses and Other Temporary Lodging and VHA Fisher House Application) Activity Under OMB Review AGENCY: Veterans Health Administration... Application for Fisher Houses and Other Temporary Lodging and VHA Fisher House Application, VA Forms 10-0408...

  4. 20 CFR 655.1301 - Applications for temporary employment certification in agriculture.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Applications for temporary employment certification in agriculture. 655.1301 Section 655.1301 Employees' Benefits EMPLOYMENT AND TRAINING... Applications for temporary employment certification in agriculture. (a) Application filing requirements. (1) An...

  5. Cultivating and Benefiting from Member Familiarity in Temporary Work Groups

    DEFF Research Database (Denmark)

    Hessel, Shannon

    cooperative behavior in these groups. Second, I challenge our expectation that a task-oriented over relationship-oriented approach will inevitably dominate work when projects are time-bound and of short duration by describing moments in which these groups chose relationship-oriented activities despite time......In this paper, I investigate an example of short-duration, time-bound project work conducted by high-performing groups in order to surprise our expectations regarding the motivations and potential to cooperate and to cultivate group member familiarity within such temporary organizations. Project...... participants included seven string quartets that worked together in different combinations and without the expectation of future collaboration across groups. I consider what motivated cooperation and relationship-oriented activities as well as the conditions which enabled these activities to emerge despite...

  6. Temporary and circular labour migration and codevelpment: a case estudy

    Directory of Open Access Journals (Sweden)

    Elena Sánchez-Montijano

    2012-05-01

    Full Text Available The search for new ways to manage international migration is one of the main topics at the current political agendas. Within this framework, Temporary and Circular Labour Migration (TCLM as a way of fl ow management on the one hand, and co-development as a set of actions that seek to articulate migration and development on the other, have recently been promoted as double win situations. Both initiatives depart from the assumption that migrants can make important contributions to development, in their countries of destination but also in their countries of origin. The paper explores the opportunities and difficulties that arise when a single initiative attempts tobring together these two types of activities, which have so far been managed by different entities and in separated venues. The study raises the question about the positive and negative effects of this alliance. The article presents the results of a TCLM case study.

  7. Evaluation Of A Temporary, Immersive Learning Community Based On Worldschooling

    Directory of Open Access Journals (Sweden)

    Aimee FERRARO

    2016-12-01

    Full Text Available Learning communities are a proven method for engaging groups of people who share common goals for personal growth and knowledge acquisition (Gabelnick, MacGregor, Matthews, & Smith, 1990; Taylor, Moore, MacGregor, & Lindblad, 2003. However, little is known about the usefulness of this approach in the context of alternative education. This article describes the evaluation of a temporary, immersive learning community for self-directed teen learners, Project World School (PWS, which was based on a new, pedagogical approach to learning called worldschooling. Findings indicate that regardless of demographic characteristics and personal interests, PWS attendees experienced learning and progress in three main areas: social development, personal development, and experiential academics. The PWS model shows evidence of the benefits of worldschooling and has potential to be successfully replicated and translated to other international settings.

  8. Temporary threshold shift after exposure to pop music.

    Science.gov (United States)

    Axelsson, A; Lindgren, F

    1978-01-01

    Temporary threshold shift (TTS) was studied in pop musicians as well as in listeners. It appears that TTS is less pronounced in pop musicians than in listeners. This can only in part be explained by slightly inferior hearing threshold levels than in the audience before exposure. Further, male listeners showed more TTS than female listeners. After 2 hours of exposure to live pop music a TTS2 appears in pop musicians after an exposure to 98 dB(A) as opposed to listeners where TTS2 appears at 92 dB(A). When the present results are related to the CHABA risk criteria it seems that exposure to live pop music at 100 dB(A) for 2 hours is a limit which should not be exceeded if the risk of permanent hearing loss is to be avoided.

  9. Temporary services for patients in need of chronic care

    DEFF Research Database (Denmark)

    Hesse, Morten

    2008-01-01

    experimentation than work placed within existing institutions. Discussion For socially marginalized groups who need continuing support and care, receiving help in a project means that the clients will have to be transferred to other services when the project ends. There is also a risk that clients will experience...... a decline in services, as staff members have to seek new employment towards the end of the project, or begin to focus more on the evaluation than the services. This raises some ethical issues concerning the use of human subjects in projects. Conclusion Project managers should consider ethical issues......Background A project is a temporary endeavour undertaken to create a product or service. Projects are frequently used for the testing and development of new approaches in social work. Projects can receive grants from central, often national or international institutions, and allow for more...

  10. Empowerment, job satisfaction, and organizational commitment: comparison of permanent and temporary nurses in Korea.

    Science.gov (United States)

    Han, Sang-Sook; Moon, Sook Ja; Yun, Eun Kyoung

    2009-11-01

    This study was conducted to describe and compare empowerment, job satisfaction, and organizational commitment between permanent and temporary nurses in Korea. Since Korea's economic crisis of 1997, Korea's labor market has been undergoing dramatic modification, and the rate of temporary nurses employed in health care organizations has gradually increased. However, studies focusing on nurses' employment status, which potentially affect the individual and hospital organization, have been rarely conducted. This was a descriptive comparative study. The convenient sample of 416 nurses from 19 hospitals in Korea completed a structured questionnaire. Overall, permanent nurses presented higher levels of job satisfaction, organizational commitment, and empowerment than did temporary nurses. The results of this study indicated that health care administrators should develop strategies to close the gap of perceptions between permanent and temporary nurses in Korea. The results of this study also imply that such opportunities and compensation plans related with administrative recognition should be made available to the temporary nurses to manage their workforces more efficiently.

  11. The Temporal Organization Grid: A New Classification System of Temporary Organizations

    Directory of Open Access Journals (Sweden)

    Vallari Chandna

    2017-03-01

    Full Text Available With the increased recognition of the key role played by time in processes and outcomes, there has been a renewed focus on temporary organizations. Temporary organizational forms tend to receive attention due to certain characteristics that are unique to them, as compared to permanent organizations, with regard to issues like trust, communication, organizational structure, innovation and creativity among others. They have also been known to generate significant benefits for the organizations participating in them. But to study them in detail, a comprehensive classification system of temporary organizations is needed, which has so far been missing in the extant literature. This paper sets forth a classification grid for temporary organizations which is its primary purpose and also examines the different strategically important variables that further define the typological framework and that act as determinants of success of these temporary organizations.

  12. Temporary ectropion therapy by adhesive taping: a case study

    Directory of Open Access Journals (Sweden)

    Habermann Anke

    2008-07-01

    Full Text Available Abstract Introduction Various surgical procedures are available to correct paralytic ectropion, which are applied in irreversible facial paresis. Problems occur when facial paresis has an unclear prognosis, since surgery of the lower eyelid is usually irreversible. We propose a simple method to correct temporary ectropion in facial palsy by applying an adhesive strip. Patients and methods Ten patients with peripheral facial paresis and paralytic ectropion were treated with an adhesive strip to correct paralytic ectropion. We used "Steri-Strips" (45 × 6.0 mm, which were taped on the carefully cleaned skin of the lower eyelid and of the adjacent zygomatic region until the prognosis of the paresis was clarified. In addition to the examiner's evaluation of the lower lacrimal point in the lacrimal lake, subjective improvement of the symptoms was assessed using a visual analogue scale (VAS, 1–10. Results 9 patients reported a clear improvement of the symptoms after adhesive taping. There was a clear regression of tearing (VAS (median = 8; 1 = no improvement, 10 = very good improvement, the cosmetic impairment of the adhesive tape was low (VAS (median = 2.5; 1 = no impairment, 10 = severe impairment and most of the patients found the use of the adhesive strip helpful. There was slight reddening of the skin in one case and well tolerated by the facial skin in the other cases. Conclusion The cause and location of facial nerve damage are decisive for the type of surgical therapy. In potentially reversible facial paresis, procedures should be used that are easily performed and above all reversible without complications. Until a reliable prognosis of the paresis can be made, adhesive taping is suited for the temporary treatment of paralytic ectropion. Adhesive taping is simple and can be performed by the patient.

  13. TREHS (Temporary Rivers Ecological and Hydrological Status): new software for investigating the degree of hydrologic alteration of temporary streams.

    Science.gov (United States)

    Gallart, Francesc; Llorens, Pilar; Cid, Núria; latron, Jérôme; Bonada, Núria; Prat, Narcís

    2017-04-01

    The evaluation of the hydrological alteration of a stream due to human activities is a first step to assess its overall quality and to design management strategies for its potential restoration. This task is currently made comparing impacted against unimpacted hydrographs, with the help of software tools, such as the IHA (Indicators of Hydrologic Alteration). Then, the environmental evaluation of the hydrological alteration is to be made in terms of its expectable menace for the original biological communities and/or its help for the spread of invasive species. However, when the regime of the target stream is not perennial, there are four main difficulties for implementing methods for assessing hydrological alteration: i) the main hydrological features relevant for biological communities in a temporary stream are not quantitative (discharges) but qualitative (temporal patterns of states such as flowing water, stagnant pools or lack of surface water), ii) stream flow records do not inform on the temporal occurrence of stagnant pools, which act as refugees for many species during the cessation of flow, iii) as most of the temporary streams are ungauged, the evaluation of their regime must be determined by using alternative methods such as remote sensing or citizen science, and iv) the biological quality assessment of the ecological status of a temporary stream must be conducted following a sampling schedule adapted to the flow regime and using adequate reference conditions. In order to overcome these challenges using an operational approach, the TREHS freely available software tool has been developed within the EU LIFE TRIVERS project (LIFE13 ENV/ES/000341). This software allows for the input of information coming from flow simulations obtained using any rainfall-runoff model (to set an unimpacted reference stream regime) and compares them with the information obtained from flow gauging records, interviews made to local citizens, instantaneous observations made by

  14. Elevated p21-Activated Kinase 2 Activity Results in Anchorage-Independent Growth and Resistance to Anticancer Drug–Induced Cell Death

    Directory of Open Access Journals (Sweden)

    Jerry W. Marlin

    2009-03-01

    Full Text Available p21-Activated kinase 2 (PAK-2 seems to be a regulatory switch between cell survival and cell death signaling. We have shown previously that activation of full-length PAK-2 by Rac or Cdc42 stimulates cell survival, whereas caspase activation of PAK-2 to the proapoptotic PAK-2p34 fragment is involved in the cell death response. In this study, we present a role of elevated activity of full-length PAK-2 in anchorage-independent growth and resistance to anticancer drug–induced apoptosis of cancer cells. Hs578T human breast cancer cells that have low levels of PAK-2 activity were more sensitive to anticancer drug–induced apoptosis and showed higher levels of caspase activation of PAK-2 than MDA-MB435 and MCF-7 human breast cancer cells that have high levels of PAK-2 activity. To examine the role of elevated PAK-2 activity in breast cancer, we have introduced a conditionally active PAK-2 into Hs578T human breast cells. Conditional activation of PAK-2 causes loss of contact inhibition and anchorage-independent growth of Hs578T cells. Furthermore, conditional activation of PAK-2 suppresses activation of caspase 3, caspase activation of PAK-2, and apoptosis of Hs578T cells in response to the anticancer drug cisplatin. Our data suggest a novel mechanism by which full-length PAK-2 activity controls the apoptotic response by regulating levels of activated caspase 3 and thereby its own cleavage to the proapoptotic PAK-2p34 fragment. As a result, elevated PAK-2 activity interrupts the apoptotic response and thereby causes anchorage-independent survival and growth and resistance to anticancer drug–induced apoptosis.

  15. Medical devices: US medical device regulation.

    Science.gov (United States)

    Jarow, Jonathan P; Baxley, John H

    2015-03-01

    Medical devices are regulated by the US Food and Drug Administration (FDA) within the Center for Devices and Radiological Health. Center for Devices and Radiological Health is responsible for protecting and promoting the public health by ensuring the safety, effectiveness, and quality of medical devices, ensuring the safety of radiation-emitting products, fostering innovation, and providing the public with accurate, science-based information about the products we oversee, throughout the total product life cycle. The FDA was granted the authority to regulate the manufacturing and marketing of medical devices in 1976. It does not regulate the practice of medicine. Devices are classified based on complexity and level of risk, and "pre-1976" devices were allowed to remain on the market after being classified without FDA review. Post-1976 devices of lower complexity and risk that are substantially equivalent to a marketed "predicate" device may be cleared through the 510(k) premarket notification process. Clinical data are typically not needed for 510(k) clearance. In contrast, higher-risk devices typically require premarket approval. Premarket approval applications must contain data demonstrating reasonable assurance of safety and efficacy, and this information typically includes clinical data. For novel devices that are not high risk, the de novo process allows FDA to simultaneously review and classify new devices. Devices that are not legally marketed are permitted to be used for clinical investigation purposes in the United States under the Investigational Device Exemptions regulation. Published by Elsevier Inc.

  16. Indoor air quality and thermal comfort in temporary houses occupied after the Great East Japan Earthquake.

    Science.gov (United States)

    Shinohara, N; Tokumura, M; Kazama, M; Yonemoto, Y; Yoshioka, M; Kagi, N; Hasegawa, K; Yoshino, H; Yanagi, U

    2014-08-01

    Thermal conditions and indoor concentrations of aldehydes, volatile organic compounds (VOCs), and NO2 were investigated in 19 occupied temporary houses in 15 temporary housing estates constructed in Minamisoma City, Fukushima, Japan. The data were collected in winter, spring, and summer in January to July 2012. Thermal conditions in temporary log houses in the summer were more comfortable than those in pre-fabricated houses. In the winter, the indoor temperature was uncomfortably low in all of the houses, particularly the temporary log houses. Indoor air concentrations for most aldehydes and VOCs were much lower than the indoor guidelines, except for those of p-dichlorobenzene, acetaldehyde, and total VOCs. The indoor p-dichlorobenzene concentrations exceeded the guideline (240 μg/m(3)) in 18% of the temporary houses, and the 10(-3) cancer risk level (91 μg/m(3)) was exceeded in winter in 21% due to use of moth repellents by the occupants. Indoor acetaldehyde concentrations exceeded the guideline (48 μg/m(3) ) in about half of the temporary houses, likely originating from the wooden building materials. Indoor NO2 concentrations in the temporary houses were significantly higher in houses where combustion heating appliances were used (0.17 ± 0.11 ppm) than in those where they were not used (0.0094 ± 0.0065 ppm). In the winter, log-house-type temporary houses are comfortable in terms of humidity, dew condensation, and fungi based on the results of questionnaires and measurements, whereas pre-fabricated temporary houses are more comfortable in terms of temperature. In the summer, log-house-type temporary houses are comfortable in terms of temperature and humidity. More comfortable temporary housing in terms of temperature and humidity year-round is needed. Indoor air concentrations of p-dichlorobenzene and NO2 were quite high in some temporary houses due to occupants’ activities, such as use of moth repellents and combustion heating appliances. The government

  17. 41 CFR 302-7.1 - Who is eligible for the transportation and temporary storage of household goods (HHG) at...

    Science.gov (United States)

    2010-07-01

    ... transportation and temporary storage of household goods (HHG) at Government expense? 302-7.1 Section 302-7.1... TRANSPORTATION AND STORAGE OF PROPERTY 7-TRANSPORTATION AND TEMPORARY STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL... temporary storage of household goods (HHG) at Government expense? The following are eligible for the...

  18. 19 CFR 10.66 - Articles exported for temporary exhibition and returned; horses exported for horse racing and...

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Articles exported for temporary exhibition and... Exhibition, Etc. § 10.66 Articles exported for temporary exhibition and returned; horses exported for horse... livestock or other animals, exported for temporary exhibition and returned and claimed to be exempt from...

  19. 78 FR 39062 - Group Lotus plc; Modification of a Temporary Exemption From an Advanced Air Bag Requirement of...

    Science.gov (United States)

    2013-06-28

    ... National Highway Traffic Safety Administration Group Lotus plc; Modification of a Temporary Exemption From... Protection. SUMMARY: This notice modifies the temporary exemption granted to Group Lotus plc (Lotus) on March... in the Federal Register a notice granting Group Lotus Plc (Lotus) a temporary exemption from the...

  20. Review of the Potential for a Cyber-Physical System Approach to Temporary Structures Monitoring

    Directory of Open Access Journals (Sweden)

    Xiao Yuan

    2015-11-01

    Full Text Available Around three quarters of construction workers work on or near temporary structures, whose failures lead to more than 100 deaths, 4500 injuries, and damage costing $90 million each year in the United States. However, few of the temporary structural problems have been well addressed, especially when compared with the increasing improvements in permanent structures. Meanwhile, the review of leading causes of temporary structural failures identifies the need for improved methods, such as Cyber-Physical Systems (CPS, to prevent potential structural hazards. This paper makes the first effort to examine CPS applicability in temporary structures, and potential benefits brought by CPS to temporary structural monitoring. Key definitions and features of CPS, CPS applications in both other industry sectors and the built environment, and applications of CPS enabling technologies in temporary structures are reviewed. It is concluded that CPS provides opportunity to address safety and structural problems of temporary structures. For a clear understanding of how CPS works in structural monitoring, an application scenario of scaffolding system is presented. Finally, system requirements followed by a system architecture are identified.

  1. Treatment of Class II malocclusion with bialveolar protrusion by means of unusual extractions and anchorage mini-implant

    Directory of Open Access Journals (Sweden)

    Jong-Moon Chae

    2012-10-01

    Full Text Available INTRODUCTION: Patients with dental Class II bialveolar protrusion are generally treated by extracting the four first premolars or two first and two second premolars, and retracting the anterior teeth. This case report describes the treatment of an adult patient with bialveolar protrusion, a Class II canine and molar relationship, and lip protrusion. METHODS: In this patient, the maxillary right second molar (1.7 had to be extracted due to extensive caries. To create sufficient space to retract the anterior teeth, the maxillary right posterior teeth were distalized with a maxillary posterior mini-implant (1.2~1.3 mm in diameter, 10 mm long, which was placed into the maxillary tuberosity area and allowed an en masse retraction of the maxillary anterior teeth. RESULTS: Overall, mini-implant can provide anchorage to produce a good facial profile even without additional premolar extraction in cases of dental Class II bialveolar protrusion with the hopeless second molar. CONCLUSION: The total treatment period was 42 months and the results were acceptable for 34 months after debonding.INTRODUÇÃO: os pacientes com Classe II e biprotrusão alveolar são, geralmente, tratados com extração de quatro primeiros pré-molares ou dois primeiros e dois segundos pré-molares, e retração dos dentes anteriores. Este relato de caso descreve o tratamento de um paciente adulto com biprotrusão alveolar, relação de caninos e de molares em Classe II e protrusão labial. MÉTODOS: nesse paciente, o segundo molar superior direito precisou ser extraído devido a cáries extensas. Para criar espaço suficiente para retração dos dentes anteriores, os dentes posterossuperiores direitos foram distalizados com um mini-implante posterossuperior (1,2 ~ 1,3mm de diâmetro, 10mm de comprimento, que foi colocado na área da tuberosidade maxilar e permitiu uma retração em massa dos dentes anteriores. RESULTADOS: em geral, mini-implantes podem fornecer ancoragem para

  2. Connector device for building integrated photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Keenihan, James R.; Langmaid, Joe A.; Eurich, Gerald K.; Lesniak, Michael J.; Mazor, Michael H.; Cleerman, Robert J.; Gaston, Ryan S.

    2015-11-10

    The present invention is premised upon a connector device and method that can more easily electrically connect a plurality of PV devices or photovoltaic system components and/or locate these devices/components upon a building structure. It also may optionally provide some additional sub-components (e.g. at least one bypass diode and/or an indicator means) and may enhance the serviceability of the device.

  3. Recurrent temporary paralysis reported after human rabies post-exposure prophylaxis.

    Science.gov (United States)

    Dato, V M; Campagnolo, E R; Shah, D U; Bellush, M J; Rupprecht, C E

    2015-05-01

    Adverse events can occur after rabies post-exposure prophylaxis (PEP), and linkage to causality is often difficult to determine. We report a case of recurrent temporary paralysis that began immediately after the initiation of rabies PEP in a man exposed to a bat. The recurrent temporary paralysis first occurred in the patient after his initial dose and then again after day 3 of his rabies PEP. The PEP was terminated prior to a serologic response. The patient continued to experience numerous discrete episodes of temporary paralysis for over two years. © 2014 Blackwell Verlag GmbH.

  4. Temporary implants for patients with low bone density of the upper maxilla: an alternative rehabilitation strategy.

    Science.gov (United States)

    de Aguiar, Rogério Coelho; Zabolotsky, Borys; de Souza, Dircilene Colares; Ferreira, Cimara Fortes; Cardoso, Antônio Carlos

    2012-03-01

    The use of removable provisional prosthesis after implant placement is undesirable for many patients. In addition, removable prostheses place unfavorable pressure over implants during the healing period. The use of temporary implants enable greater stability and functionality of the prostheses. This clinical report shows the use of temporary implants in a low density maxilla in conjunction with a fixed provisional prosthesis. The temporary implants contributed to the support of the provisional fixed upper arch prosthesis and to patient comfort with a fixed prosthesis during the healing period.   Fixed provisional prostheses are a potentially desirable alternative treatment strategy. © 2009 Wiley Periodicals, Inc.

  5. Failure of communication and capture: The perils of temporary unipolar pacing system

    Directory of Open Access Journals (Sweden)

    Efe Sahinoglu, BChE

    2015-06-01

    Full Text Available We present a case of a patient with pacemaker dependence secondary to complete heart block who developed loss of capture of her temporary pacemaker. Patient developed torsades de pointes then ventricular fibrillation, requiring CPR and external cardioversion. After patient was stabilized, it was noticed that loss of capture of pacemaker corresponded with nursing care, when the pulse generator was lifted off patient׳s chest wall, and that patient׳s temporary pacing system had been programmed to unipolar mode without knowledge of attending cardiologist. This case highlights the importance of communication ensuring all caregivers are aware of mode of the temporary pacing system.

  6. Antioxidants protect proteins' anchorage to the bilayer by improving plasma membrane integrity of ram spermatozoa during liquid preservation in a soya lecithin-based diluent.

    Science.gov (United States)

    Paul, R K; Kumar, D; Naqvi, Smk

    2017-12-01

    Antioxidants are known to prevent the reactive oxygen species (ROS)-mediated peroxidative damage to the membrane lipids during hypothermic storage of mammalian spermatozoa. We hypothesized here that ROS also affect the lipid-protein interactions, thereby diminishing the membrane's integrity and proteins' anchorage to the bilayer. Antioxidants prevent these damages by scavenging the ROS. Ejaculates from Patanwadi rams were pooled after subjective evaluation and centrifuged using Percoll® . Sperm pellet was resuspended in soya lecithin-Tris-fructose diluent (400 × 106  cells/ml) containing either antioxidants (100 IU/ml catalase + 10 mM reduced glutathione) or no antioxidant. Aliquots were chilled to 5°C in a cabinet and stored in a refrigerator at 3-5°C for 72 hr. Sperm motility, viability, lipid peroxidation (LPO) and hypo-osmotic swelling test (HOST) were performed at 0, 24, 48 and 72 hr. Sperm proteins extracted with 0.5% Triton X-100 were resolved by SDS-PAGE and quantified using Quantity One software (Bio-Rad, USA). The rapid motility, linearity and straight-line velocity (VSL) were found significantly (p membrane integrity and protection of proteins' anchorage to the plasma membrane at 48 and 72 hr of storage. © 2017 Blackwell Verlag GmbH.

  7. A role for Mfb1p in region-specific anchorage of high-functioning mitochondria and lifespan in Saccharomyces cerevisiae

    Science.gov (United States)

    Pernice, Wolfgang M.; Vevea, Jason D.; Pon, Liza A.

    2016-01-01

    Previous studies indicate that replicative lifespan in daughter cells of Sacchraromyces cerevisiae depends on the preferential inheritance of young, high-functioning mitochondria. We report here that mitochondria are functionally segregated even within single mother cells in S. cerevisiae. A high-functioning population of mitochondria accumulates at the tip of the mother cell distal to the bud. We find that the mitochondrial F-box protein (Mfb1p) localizes to mitochondria in the mother tip and is required for mitochondrial anchorage at that site, independent of the previously identified anchorage protein Num1p. Deletion of MFB1 results in loss of the mother-tip-localized mitochondrial population, defects in mitochondrial function and premature replicative ageing. Inhibiting mitochondrial inheritance to buds, by deletion of MMR1, in mfb1Δ cells restores mitochondrial distribution, promotes mitochondrial function and extends replicative lifespan. Our results identify a mechanism that retains a reservoir of high-functioning mitochondria in mother cells and thereby preserves maternal reproductive capacity. PMID:26839174

  8. Di-Ethylhexylphthalate (DEHP Modulates Cell Invasion, Migration and Anchorage Independent Growth through Targeting S100P in LN-229 Glioblastoma Cells

    Directory of Open Access Journals (Sweden)

    Jennifer Nicole Sims

    2014-05-01

    Full Text Available Glioblastoma multiforme (GBM is the most aggressive brain cancer with a median survival of 1–2 years. The treatment of GBM includes surgical resection, radiation and chemotherapy, which minimally extends survival. This poor prognosis necessitates the identification of novel molecular targets associated with glioblastoma. S100P is associated with drug resistance, metastasis, and poor clinical outcomes in many malignancies. The functional role of S100P in glioblastoma has not been fully investigated. In this study, we examined the role of S100P mediating the effects of the environmental contaminant, DEHP, in glioblastoma cells (LN-229 by assessing cell proliferation, apoptosis, anchorage independent growth, cell migration and invasion following DEHP exposure. Silencing S100P and DEHP treatment inhibited LN-229 glioblastoma cell proliferation and induced apoptosis. Anchorage independent growth study revealed significantly decreased colony formation in shS100P cells. We also observed reduced cell migration in cells treated with DEHP following S100P knockdown. Similar results were observed in spheroid formation and expansion. This study is the first to demonstrate the effects of DEHP on glioblastoma cells, and implicates S100P as a potential therapeutic target that may be useful as a drug response biomarker.

  9. Medical Device Safety

    Science.gov (United States)

    A medical device is any product used to diagnose, cure, or treat a condition, or to prevent disease. They ... may need one in a hospital. To use medical devices safely Know how your device works. Keep ...

  10. Infrared criminalistic devices

    Science.gov (United States)

    Gibin, Igor S.; Savkov, E. V.; Popov, Pavel G.

    1996-12-01

    We are presenting the devices of near-IR spectral range in this report. The devices may be used in criminalistics, in bank business, in restoration works, etc. the action principle of these devices is describing briefly.

  11. Anchorage in concrete construction

    CERN Document Server

    Eligehausen, Rolf; Silva, John F

    2013-01-01

    A comprehensive treatment of current fastening technology using inserts (anchor channels, headed stud), anchors (metal expansion anchor, undercut anchor, bonded anchor, concrete screw and plastic anchor) as well as power actuated fasteners in concrete. It describes in detail the fastening elements as well as their effects and load-bearing capacities in cracked and non-cracked concrete. It further focuses on corrosion behaviour, fire resistance and characteristics with earthquakes and shocks. It finishes off with the design of fastenings according to the European Technical Approval Guideline (ETAG 001), the Final Draft of the CEN Technical Specification 'Design of fastenings for use in concrete' and the American Standards ACI 318-05, Appendix D and ACI 349-01, Appendix B.

  12. Anchorages - USACE IENC

    Data.gov (United States)

    Department of Homeland Security — These inland electronic Navigational charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...

  13. Implantable electronic medical devices

    CERN Document Server

    Fitzpatrick, Dennis

    2014-01-01

    Implantable Electronic Medical Devices provides a thorough review of the application of implantable devices, illustrating the techniques currently being used together with overviews of the latest commercially available medical devices. This book provides an overview of the design of medical devices and is a reference on existing medical devices. The book groups devices with similar functionality into distinct chapters, looking at the latest design ideas and techniques in each area, including retinal implants, glucose biosensors, cochlear implants, pacemakers, electrical stimulation t

  14. Paxillin-Y118 phosphorylation contributes to the control of Src-induced anchorage-independent growth by FAK and adhesion

    Directory of Open Access Journals (Sweden)

    Gelman Irwin H

    2009-01-01

    Full Text Available Abstract Background Focal adhesion kinase (FAK and Src are protein tyrosine kinases that physically and functionally interact to facilitate cancer progression by regulating oncogenic processes such as cell motility, survival, proliferation, invasiveness, and angiogenesis. Method To understand how FAK affects oncogenesis through the phosphorylation of cellular substrates of Src, we analyzed the phosphorylation profile of a panel of Src substrates in parental and v-Src-expressing FAK+/+ and FAK-/- mouse embryo fibroblasts, under conditions of anchorage-dependent (adherent and -independent (suspension growth. Results Total Src-induced cellular tyrosine phosphorylation as well as the number of phosphotyrosyl substrates was higher in suspension versus adherent cultures. Although the total level of Src-induced cellular phosphorylation was similar in FAK+/+ and FAK-/- backgrounds, the phosphorylation of some substrates was influenced by FAK depending on adherence state. Specifically, in the absence of FAK, Src induced higher phosphorylation of p190RhoGAP, paxillin (poY118 and Crk irrespective of adhesion state, PKC-δ (poY311, connexin-43 (poY265 and Sam68 only under adherent conditions, and p56Dok-2 (poY351 and p120catenin (poY228 only under suspension conditions. In contrast, FAK enhanced the Src-induced phosphorylation of vinculin (poY100 and poY1065 and p130CAS (poY410 irrespective of adherence state, p56Dok-2 (poY351 and p120catenin (poY228 only under adherent conditions, and connexin-43 (poY265, cortactin (poY421 and paxillin (poY31 only under suspension conditions. The Src-induced phosphorylation of Eps8, PLC-γ1 and Shc (poY239/poY240 were not affected by either FAK or adherence status. The enhanced anchorage-independent growth of FAK-/-[v-Src] cells was selectively decreased by expression of paxillinY118F, but not by WT-paxillin, p120cateninY228F or ShcY239/240F, identifying for the first time a role for paxillinpoY118 in Src-induced anchorage

  15. [Promotional campaign of temporary methods on the Atlantic Coast].

    Science.gov (United States)

    Negrette, J C

    1989-12-01

    In 1986 the Third National Survey on Contraceptive Prevalence took place in Colombia. The results of this article are based on the CPR of Colombia's Atlantic Coast. The information demonstrated the high prevalence of female sterilization in the area, but also the lowest CPR among temporary methods. As a result of these outcomes PROFAMILIA, along with The Futures Group/SOMARC and Johns Hopkins University launched a promotional campaign in the Atlantic Region to increase the CPR. However, prior to the campaign, PROFAMILIA instituted 2 surveys to collect baseline data for the promotional campaign. The initial KAP survey was the 1st of its kind in the Atlantic Coast directed at men (15-59) and women (15-49) in fertile ages; while the 2nd KAP survey was directed at the pharmacists in the region. Focus groups were organized to determine attitudes and practices of individual men and women in the area. The social marketing of condoms and orals took place because of the attitudes of men and women towards childbearing. Most women wanted to have their children quickly followed by getting "disconnected" from childbearing through sterilization. While they are having children, they need the pill to properly space each birth. The outcomes of marketing these 2 methods demonstrated that condoms were easier to market than the pill.

  16. Temporary refugia for coral reefs in a warming world

    Science.gov (United States)

    van Hooidonk, R.; Maynard, J. A.; Planes, S.

    2013-05-01

    Climate-change impacts on coral reefs are expected to include temperature-induced spatially extensive bleaching events. Bleaching causes mortality when temperature stress persists but exposure to bleaching conditions is not expected to be spatially uniform at the regional or global scale. Here we show the first maps of global projections of bleaching conditions based on ensembles of IPCC AR5 (ref. ) models forced with the new Representative Concentration Pathways (RCPs). For the three RCPs with larger CO2 emissions (RCP 4.5, 6.0 and 8.5) the onset of annual bleaching conditions is associated with ~ 510ppm CO2 equivalent; the median year of all locations is 2040 for the fossil-fuel aggressive RCP 8.5. Spatial patterns in the onset of annual bleaching conditions are similar for each of the RCPs. For RCP 8.5, 26% of reef cells are projected to experience annual bleaching conditions more than 5 years later than the median. Some of these temporary refugia include the western Indian Ocean, Thailand, the southern Great Barrier Reef and central French Polynesia. A reduction in the growth of greenhouse-gas emissions corresponding to the difference between RCP 8.5 and 6.0 delays annual bleaching in ~ 23% of reef cells more than two decades, which might conceivably increase the potential for these reefs to cope with these changes.

  17. Temporary work for children of members of the personnel

    CERN Multimedia

    2007-01-01

    TO ALL MEMBERS OF THE PERSONNEL During the period 11 June to 14 September 2007 inclusive, a limited number of temporary jobs at CERN (normally unskilled work of a routine nature) will be made available to children of members of the personnel (i.e. anyone holding an employment or association contract with CERN). It should be noted that candidates must be aged between 18 and 24 inclusive on the first day of the contract, and that they must have insurance cover for both illness and accident. In view of the limited number of jobs available, no children who have previously worked at CERN under this scheme can be considered. The duration of all appointments will be 4 weeks, the allowance being CHF 1663.- for this period. Candidates should apply via the HR Department's electronic recruitment system (E-rt): https://ert.cern.ch/browse_www/wd_pds?p_web_page_id=5466 Completed application forms must be returned to this service by 13 April 2007 at the latest. The results of the selection will be available on 11 May 2...

  18. Temporary work for children of members of the personnel

    CERN Multimedia

    2006-01-01

    TO ALL MEMBERS OF THE PERSONNEL During the period 12 June to 15 September 2006 included, there will be a limited number of jobs for temporary work at CERN (normally unskilled work of routine nature) which will be made available to children of members of the personnel (i.e. anyone holding an employment or association contract with CERN). It should be noted that candidates must be aged between 18 and 24 inclusive on the first day of the contract, and that they must have insurance cover for both illness and accident. In view of the limited number of jobs available, no children who have previously worked at CERN under this scheme can be considered. The duration of all appointments will be 4 weeks, the allowance being CHF 1640.- for this period. Candidates should apply via HR department's electronic recruitment system (E-rt) : https://ert.cern.ch/browse_www/wd_pds?p_web_page_id=4691 Completed application forms must be returned to this service by 17 April 2006 at the latest. The results of the selection will be a...

  19. Temporary work for children of members of the personnel

    CERN Multimedia

    2006-01-01

    TO ALL MEMBERS OF THE PERSONNEL During the period 12 June to 15 September 2006 included, there will be a limited number of jobs for temporary work at CERN (normally unskilled work of routine nature) which will be made available to children of members of the personnel (i.e. anyone holding an employment or association contract with CERN). It should be noted that candidates must be aged between 18 and 24 inclusive on the first day of the contract, and that they must have insurance cover for both illness and accident. In view of the limited number of jobs available, no children who have previously worked at CERN under this scheme can be considered. The duration of all appointments will be 4 weeks, the allowance being CHF 1640.- for this period. Candidates should apply via HR department's electronic recruitment system (E-rt) : https://ert.cern.ch/browse_www/wd_pds?p_web_page_id=4691 Completed application forms must be returned to this service by 17 April 2006 at the latest. The results of the selection will be...

  20. Temporary work for children of members of the personnel

    CERN Multimedia

    2007-01-01

    TO ALL MEMBERS OF THE PERSONNEL During the period 11 June to 14 September 2007 inclusive, a limited number of temporary jobs at CERN (normally unskilled work of a routine nature) will be made available to children of members of the personnel (i.e. anyone holding an employment or association contract with CERN). It should be noted that candidates must be aged between 18 and 24 inclusive on the first day of the contract, and that they must have insurance cover for both illness and accident. In view of the limited number of jobs available, no children who have previously worked at CERN under this scheme can be considered. The duration of all appointments will be 4 weeks, the allowance being CHF 1663.- for this period. Candidates should apply via the HR Department's electronic recruitment system (E-rt): https://ert.cern.ch/browse_www/wd_pds?p_web_page_id=5466 Completed application forms must be returned to this service by 13 April 2007 at the latest. The results of the selection will be available on 11 May 200...

  1. Temporary work for children of members of the personnel

    CERN Multimedia

    2007-01-01

    TO ALL MEMBERS OF THE PERSONNEL During the period 11 June to 14 September 2007 included, there will be a limited number of jobs for temporary work at CERN (normally unskilled work of routine nature) which will be made available to children of members of the personnel (i.e. anyone holding an employment or association contract with CERN). It should be noted that candidates must be aged between 18 and 24 inclusive on the first day of the contract, and that they must have insurance cover for both illness and accident. In view of the limited number of jobs available, no children who have previously worked at CERN under this scheme can be considered. The duration of all appointments will be 4 weeks, the allowance being CHF 1663.- for this period. Candidates should apply via HR department's electronic recruitment system (E-rt): https://ert.cern.ch/browse_www/wd_pds?p_web_page_id=5466 Completed application forms must be returned to this service by 13 April 2007 at the latest. The results of the selection will be...

  2. K Basins sludge removal temporary sludge storage tank system

    Energy Technology Data Exchange (ETDEWEB)

    Mclean, M.A.

    1997-06-12

    Shipment of sludge from the K Basins to a disposal site is now targeted for August 2000. The current path forward for sludge disposal is shipment to Tank AW-105 in the Tank Waste Remediation System (TWRS). Significant issues of the feasibility of this path exist primarily due to criticality concerns and the presence of polychlorinated biphenyls (PCBS) in the sludge at levels that trigger regulation under the Toxic Substance Control Act. Introduction of PCBs into the TWRS processes could potentially involve significant design and operational impacts to both the Spent Nuclear Fuel and TWRS projects if technical and regulatory issues related to PCB treatment cannot be satisfactorily resolved. Concerns of meeting the TWRS acceptance criteria have evolved such that new storage tanks for the K Basins sludge may be the best option for storage prior to vitrification of the sludge. A reconunendation for the final disposition of the sludge is scheduled for June 30, 1997. To support this decision process, this project was developed. This project provides a preconceptual design package including preconceptual designs and cost estimates for the temporary sludge storage tanks. Development of cost estimates for the design and construction of sludge storage systems is required to help evaluate a recommendation for the final disposition of the K Basin sludge.

  3. Proposed Measures to Protect Temporary Roofs from Unwanted Heat Gains

    Directory of Open Access Journals (Sweden)

    Omar S. Asfour

    2017-06-01

    Full Text Available This study focuses on the uncompleted multi-storey residential buildings located in hot climates. This construction pattern is common in the case of incremental housing, where additional floors are added to the building as housing needs grow. Top roofs in these buildings are usually left without thermal insulation until the rest of upper floors are erected. This causes higher thermal discomfort in the top flats compared to the lower ones. Thus, the aim of this study is to investigate thermal effect of some proposed temporary measures that are intended to protect these roofs from unwanted heat gains until the rest of storeys are constructed. This has been carried out using thermal modelling to find out the effect of these measures on the amount of heat transfer through the roof in both summer and winter times. The analysis showed that it is possible to achieve competent thermal protection of the top roof compared to the layered thermal insulation using simple, cost-effective, and reversible measures. Among the examined measures, covering the roof with white foldable sheets and the use of pergolas have been found to be the most effective measures. In both cases, a reduction of 38% in conductive heat transfer through the top roof in summer was observed compared to the unprotected modelling case.

  4. Ultraefficient Themoelectric Devices Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Thermoelectric (TE) devices already found a wide range of commercial, military and aerospace applications. However, at present commercially available TE devices...

  5. Perceptions of leader-member exchange: comparison of permanent and temporary employees.

    Science.gov (United States)

    Lamude, K G; Scudder, J; Simmons, D

    2000-10-01

    This study was done to explore how perceived scores for leader-member exchange varies among temporary employees and permanent employees. Study of 158 subordinates indicated no significant difference between the two member groups.

  6. 78 FR 2986 - Northern Indiana Public Service Company; Notice of Application for Temporary Variance of License...

    Science.gov (United States)

    2013-01-15

    ... Energy Regulatory Commission Northern Indiana Public Service Company; Notice of Application for Temporary...-056. c. Date Filed: November 28, 2012. d. Applicant: Northern Indiana Public Service Company (licensee.... Justin Darling, Hydro Supervisor-- Chemical and Environmental Compliance, Northern Indiana Public Service...

  7. METHOD OF LOADING OF SURFACES OF INFLUENCE BY TEMPORARY MOVING LOAD LM1

    Directory of Open Access Journals (Sweden)

    Ilyushin Nikolay Viktorovich

    2012-10-01

    The proposed methodology represents an unambiguous solution to the problem of identification of unfavourable positions of the temporary moving load LM1 (EN 1991-2 and the extreme forces or relocations involved in this respect.

  8. Instruction manual for operating the Sensys System for temporary traffic counts

    Science.gov (United States)

    2010-01-01

    This instruction manual provides information and the procedures for using the Sensys System, which was initially designed to operate in a server controlled network, for temporary traffic counts. The instructions will allow the user to fully understan...

  9. Early Closure of a Temporary Ileostomy in Patients With Rectal Cancer

    DEFF Research Database (Denmark)

    Danielsen, Anne K; Park, Jennifer; Jansen, Jens E

    2017-01-01

    anastomotic dehiscence. However, the temporary ileostomy is afflicted with complications and requires a second surgical procedure (closure) with its own complications. Early closure of the temporary ileostomy could reduce complications for rectal cancer patients. METHODS: Early closure (8-13 days after stoma...... creation) of a temporary ileostomy was compared with late closure (>12 weeks) in a multicenter randomized controlled trial, EASY (www.clinicaltrials.gov, NCT01287637) including patients undergoing rectal resection for cancer. Patients with a temporary ileostomy without signs of postoperative complications......: The trial included 127 patients in eight Danish and Swedish surgical departments, and 112 patients were available for analysis. The mean number of complications after index surgery up to 12 months follow up was significantly lower in the intervention group (1.2) compared with the control group (2.9), P

  10. Working together: critical care nurses experiences of temporary staffing within Swedish health care: A qualitative study.

    Science.gov (United States)

    Berg Jansson, Anna; Engström, Åsa

    2017-08-01

    The aim of this study is to describe critical care nurses (CCN's) experiences of working with or as temporary agency staff. This explorative qualitative study is based on interviews with five agency CCNs and five regular CCNs, a total of ten interviews, focusing on the interviewees' experiences of daily work and temporary agency staffing. The interviews were analysed manually and thematically following an inductive approach. Four themes that illustrate both similarities and differences between regular and temporary agency CCNs emerged: "working close to patients versus being responsible for everything", "teamwork versus independence", "both groups needed" and "opportunities and challenges". The study findings illustrate the complexity of the working situation for agency and regular staff in terms of the organisation and management of the temporary agency nurses and the opportunities and challenges faced by both groups. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. 77 FR 64352 - Notice of Temporary Closure of Public Lands in Custer County, ID

    Science.gov (United States)

    2012-10-19

    ... that a temporary closure to motorized travel and human entry is in effect on public lands administered... wild horses and the time needed to move the horses to the gather corrals. The legal description of the...

  12. Temporary wetlands of upland and floodplain forests on Noxubee NWR and Tombigbee NF

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Studies were conducted on 10 temporary wetlands from May 2001 - March 2006 on Noxubee National Wildlife Refuge and adjoining sections of Tombigbee National Forest to...

  13. The Hemopump--a new cardiac prothesis device.

    Science.gov (United States)

    Butler, K C; Moise, J C; Wampler, R K

    1990-02-01

    A unique cardiac prothesis device is currently undergoing clinical trials. Called the Hemopump, this device is a radical new design of a temporary left ventricular assist blood pump. It uses a miniature (7 mm diameter) axial flow pump placed transvalvular across the aortic valve which pumps blood from the left ventricle to the aorta. Mechanical power from an external motor is transmitted percutaneously to the pump by a flexible cable contained within a catheter-like sheath. This arrangement allows the pump to be placed through a femoral artery cutdown without requiring major surgery. Development of the Hemopump concept presented significant challenges in pump hydraulic design, bearing, and seal design, as well as materials selection and miniature parts fabrication. Clinical trial results thus far indicate these challenges have been well met and that the Hemopump has the potential to become a widely used safe and effective clinical device.

  14. Personal use of hair dyes and temporary black tattoos in Copenhagen hairdressers

    DEFF Research Database (Denmark)

    Hansen, Henriette S; Johansen, Jeanne D; Thyssen, Jacob P

    2010-01-01

    Hairdressers are occupationally and personally exposed to hair dye substances and adverse reactions from the skin are well known. Currently, little is known about personal exposure to hair dye ingredients and temporary black tattoos.......Hairdressers are occupationally and personally exposed to hair dye substances and adverse reactions from the skin are well known. Currently, little is known about personal exposure to hair dye ingredients and temporary black tattoos....

  15. USAGE OF PASTE FOR TEMPORARY PLACEMENT IN THE TREATMENT OF CHRONIC APICAL PERIODONTITIS

    OpenAIRE

    A.V. BORYSENKO; S.I. Palamarciuk

    2012-01-01

    Summary: The aim of the present investigation was usage of medicamental paste with antibacterial and regeneration action for temporary placement in the treatment of chronic apical periodontitis. Materials and method: The medicamental paste for temporary placement of root canals consists of a mixture of metronidazole, Enterosgel (Silm) and Alflutop (Biotehnos S.A., Romania). Thë paste was used for the treatment of 30 teeth with chronic apical periodontitis. Final obt...

  16. The impact of worker effort on public sentiment toward temporary migrants

    OpenAIRE

    Gil S. Epstein; Venturini, Alessandra

    2011-01-01

    Temporary and circular migration programs have been devised by many destination countries and supported by the European Commission as a policy to reduce welfare and social costs of immigration in destination countries. In this paper we present an additional reason for proposing temporary migration policies based on the characteristics of the foreign labor-effort supply. The level of effort exerted by migrants, which decreases over their duration in the host country, positively affects product...

  17. The impact of worker effort on public sentiment towards temporary migrants

    OpenAIRE

    Gil S. Epstein; Venturini, Alessandra

    2011-01-01

    Temporary and circular migration programs have been devised by many destination countries and supported by the European Commission as a policy to reduce welfare and social costs of immigration in destination countries. In this paper we present an additional reason for proposing temporary migration policies based on the characteristics of the foreign labor-effort supply. The level of effort exerted by migrants, which decreases over their duration in the host country, positively affects product...

  18. Temporary agency work, the changing employment relationship and its impact on Human Resource Management

    OpenAIRE

    Mitlacher, Lars W.

    2005-01-01

    The increasing use of temporary agency work in Germany has implications for the nature of the employment relationship. The notion of a clearly defined employeremployee relationship becomes difficult to uphold in triangular relationships like in the case of temporary agency work where the agencies employees are working at the site of the client company. The blurring of the boundaries of organisations and of the employment relationship leads to ambiguities that affect Human Resource Management....

  19. Temporary transarticular stabilization with a locking plate for medial shoulder luxation in a dog.

    Science.gov (United States)

    Post, C; Guerrero, T; Voss, K; Montavon, P M

    2008-01-01

    This report describes the temporary fixation of a traumatic shoulder luxation in a large-breed dog using a 3.5-mm Locking Round-Hole Reconstruction Plate (LRHRP) to provide stable internal splinting, allowing healing of the injured ligaments, joint capsule, glenohumeral ligaments, tendons, and muscles for restoration of joint stability. The use of a temporary plate with a locking system should be considered as an option in the treatment of canine shoulder joint luxations with severe tissue damage.

  20. U.S.-Russia-East Asia Comparisons of Dispatch (Temporary Worker Regulations

    Directory of Open Access Journals (Sweden)

    Ronald Brown

    2017-01-01

    Full Text Available Russia had few temporary workers in the 1990s, but after the fall of the Soviet Union and the entrance of foreign MNCs, the percent of workers on temporary contracts grew in 2014. In 2016, a new law was implemented that bans hiring temporary workers except through government-accredited agencies, but only for the purpose of substituting for employees who are temporarily absent from the workplace; to assist in the temporary expansion of production or services (for up to a maximum of nine months; and to provide temporary employment to certain approved categories of workers (i.e., fulltime students, single parents, parents of multiple children, and former convicts.This paper will compare and contrast the current labor protections of temporary dispatch workers in the U.S. and Russia, with consideration also of the recent legislative labor protections provided in the East Asian countries of China, South Korea, and Japan.Following the Introduction, the paper, in Part I discusses the phenomena of “fissurization,” in employment relations and its resulting legal implications for the regulation of “dispatch (agency” workers in the above countries. Part II compares and contrasts the regulatory approaches of the U.S. with Russia and the East Asian countries of China, Japan, and South Korea; and the Conclusion follows. Perhaps the menu of regulatory legislation provided in this paper will be useful for those looking for the tools to construct dispatch regulation in the U.S.

  1. Temporary Workforce Planning with Firm Contracts: A Model and a Simulated Annealing Heuristic

    Directory of Open Access Journals (Sweden)

    Muhammad Al-Salamah

    2011-01-01

    Full Text Available The aim of this paper is to introduce a model for temporary staffing when temporary employment is managed by firm contracts and to propose a simulated annealing-based method to solve the model. Temporary employment is a policy frequently used to adjust the working hour capacity to fluctuating demand. Temporary workforce planning models have been unnecessarily simplified to account for only periodic hiring and laying off; a company can review its workforce requirement every period and make hire-fire decisions accordingly, usually with a layoff cost. We present a more realistic temporary workforce planning model that assumes a firm contract between the worker and the company, which can extend to several periods. The model assumes the traditional constraints, such as inventory balance constraints, worker availability, and labor hour mix. The costs are the inventory holding cost, training cost of the temporary workers, and the backorder cost. The mixed integer model developed for this case has been found to be difficult to solve even for small problem sizes; therefore, a simulated annealing algorithm is proposed to solve the mixed integer model. The performance of the SA algorithm is compared with the CPLEX solution.

  2. The health of temporary foreign workers in Canada: A scoping review.

    Science.gov (United States)

    Salami, Bukola; Meherali, Salima; Salami, Azeez

    2016-03-16

    Temporary foreign workers contribute to economic prosperity in Canada, but they experience forms of structural inequities and have minimal rights, which can contribute to their ill health. The objective of this scoping review is to examine the extent, range and nature of the Canadian literature on the health of temporary foreign workers and their families in Canada. The review was guided by Arksey and O'Malley's five stages for conducting a scoping review. We performed a comprehensive search of seven databases, which revealed 994 studies. In total, 10 published research papers, which focused exclusively on the health of temporary foreign workers in Canada, were included in the study; these 10 papers represented the findings from 9 studies. The majority of the studies involved seasonal agricultural workers in the province of Ontario (n = 8). Major health issues of temporary foreign workers included mental health, occupational health, poor housing and sanitation, and barriers to accessing health care, including fear of deportation and language barriers. These health issues are highly shaped by temporary foreign workers' precarious immigration status in Canada. Findings from this study demonstrate the need to reduce barriers to health care and to conduct more research on other groups of temporary foreign workers, outside the agricultural sector.

  3. Altered translatability of messenger RNA from suspended anchorage-dependent fibroblasts: reversal upon cell attachment to a surface.

    Science.gov (United States)

    Farmer, S R; Ben-Ze'av, A; Benecke, B J; Penman, S

    1978-10-01

    Anchorage-dependent cells, when forced into suspension culture, display a repertoire of dramatic, coordinated regulatory phenomena. Message production promptly decreases 5 gold but the cells maintain a constant amount of poly(A)+ by means of a concomitant stabilization of mRNA against decay. Protein synthesis shuts down much later and the mRNA is stored in a nonfunctioning state. In this study, the inactive mRNA is extracted from suspended cells and shown to have aberrant translation properties. Well defined polypeptides are apparently no longer synthesized when this mRNA directs protein formation in either reticulocyte or wheat germ-derived heterologous translation systems. Rather, shortened peptides are formed by this mRNA and these become smaller as mRNA is used from cells suspended for longer periods of time. Very few focused spots are formed when the aberrant polypeptides are analyzed in two-dimensional electrophoresis. The sedimentation properties of suspended cell mRNA and the size of poly(A) are unchanged from control monolayer cells. Cross-hybridization of cDNA transcribed from a control cell message population with suspended cell mRNA shows that all sequences are present in normal concentrations. While most identifiable spots disappear from the two-dimensional gel electropherograms of the protein products produced by suspended cell mRNA, a few polypeptides are still synthesized in relatively normal amounts. Conserved polypeptides are found in products of both the reticulocyte and wheat germ systems, but they are different products in each case. The lesion in the suspended cell mRNA does not seem to be at the 5' termini, since synthesis of the shortened peptides is fully sensitive to inhibition of pm7G. Cells that contain extensively modified message can resume protein synthesis when allowed to reattach to a solid substrate. There is an apparent remodification of mRNA to normal translatability within a few hours of cell reattachment, since mRNA from

  4. Implantable CMOS Biomedical Devices

    Directory of Open Access Journals (Sweden)

    Toshihiko Noda

    2009-11-01

    Full Text Available The results of recent research on our implantable CMOS biomedical devices are reviewed. Topics include retinal prosthesis devices and deep-brain implantation devices for small animals. Fundamental device structures and characteristics as well as in vivo experiments are presented.

  5. Hip supporting device

    DEFF Research Database (Denmark)

    2011-01-01

    The present invention relates to a device for limiting movements in one or more anatomical joints, such as a device for limiting movement in the human hip joint after hip replacement surgery. This is provided by a device for limiting movement in the human hip joint, said device comprising: at least...

  6. Temporary Sutureless Amniotic Membrane Patch for Acute Alkaline Burns

    Science.gov (United States)

    Kheirkhah, Ahmad; Johnson, Daniel A.; Paranjpe, Deval R.; Raju, V.K.; Casas, Victoria; Tseng, Scheffer C. G.

    2010-01-01

    Objective To evaluate the clinical outcome of a new sutureless approach for a temporary amniotic membrane patch (ProKera; Bio-Tissue, Inc, Miami, Florida) in eyes with acute burns. Methods Retrospective review of 5 eyes of 5 patients with grades I to III acute alkaline burns, receiving ProKera insertion within 8 days of injury. Results These eyes had either total (2 cases) or extensive (60%–75%, 3 cases) corneal epithelial defects with limbal (120°–360°) and conjunctival (30%–60%) epithelial defects. ProKera was inserted within a mean (SD) of 3.7 (3.1) days after burn and repeated 1 to 3 times for 3 cases. Conjunctival defects reepithelialized in 8.2 (5) days (range, 5–17 days), while limbal and corneal defects healed in 13.6 (8.3) days (range, 5–25 days). The latter was completed with circumferential closure of limbal defects followed by centripetal healing of corneal defects. In 3 eyes, early peripheral corneal neovascularization was followed by marked regression on completion of healing. During 16.8 (10.8) months of follow-up, all eyes retained a stable surface with improved corneal clarity, and without limbal deficiency or symblepharon. Conclusion This sutureless application of an amniotic membrane patch allows for early delivery of its biologic actions, which may help preserve remaining limbal stem cells for rapid expansion and prevent late cicatricial complications in eyes with mild and moderate acute alkaline burns. PMID:18695099

  7. Intolerance of Uncertainty: A Temporary Experimental Induction Procedure

    Science.gov (United States)

    Mosca, Oriana; Lauriola, Marco; Carleton, R. Nicholas

    2016-01-01

    Background and Objectives Intolerance of uncertainty (IU) is a trans-diagnostic construct involved in anxiety and related disorders. Research focused on cross-sectional reporting, manipulating attitudes toward objective and impersonal events or on treatments designed to reduce IU in clinical populations. The current paper presents an experimental procedure for laboratory manipulations of IU and tests mediation hypotheses following the Intolerance of Uncertainty Model. Methods On pre-test, undergraduate volunteers (Study 1, n = 43;68% women. Study 2, n = 169;83.8% women) were asked to provide an idiosyncratic future negative life event. State-IU, Worry, Positive and Negative Affect were assessed after that a standardized procedure was used to identify event’s potential negative consequences. The same variables were assessed on post-test, after that participants were asked to read-through increasing and decreasing IU statements. Results Temporary changes on IU were consistently reproduced in both studies. Participants receiving increasing IU instructions reported greater state-IU, Worry and Negative Affect than those receiving decreasing IU instructions. However, this latter condition was not different from a control one (Study 2). Both studies revealed significant indirect effects of IU induction instructions on Worry and Negative Affect through state-IU. Limitations Both studies used undergraduate psychology students samples, younger than average population and predominantly female. Experimental manipulation and outcome measures belongs to the same semantic domain, uncertainty, potentially limiting generalizability. Conclusions Results supported the feasibility and efficacy of the proposed IU manipulation for non-clinical sample. Findings parallel clinical research showing that state-IU preceded Worry and Negative Affect states. PMID:27254099

  8. Temporary hemiepiphysiodesis of the distal medial femur: MPFL in danger.

    Science.gov (United States)

    Bachmann, M; Rutz, E; Brunner, R; Gaston, M S; Hirschmann, M T; Camathias, C

    2014-08-01

    Temporary hemiepiphysiodesis (TH) with plate fixation is a well-accepted and common treatment for correcting leg malalignment in skeletally immature patients. The purpose of this study was to investigate any soft tissue damage caused during TH at the distal medial femur with a plate and two screws. We hypothesized that correct plate placement can affect the integrity of the medial stabilizing structures of the knee, especially the medial patellofemoral ligament (MPFL), the medial collateral ligament (MCL) or result in arthrotomy of the knee joint itself. In eight cadaveric knees of five adult humans a TH was performed with a plate and two cancellous screws at the distal medial femur using a standardized surgical technique. Subsequently the medial capsular and ligamentous structures were systematically exposed and assessed. Capsular and synovial tissue was also inspected for impingement by the plate or screws. In all knees the MPFL was present. In two specimens the MPFL was intact and the plate was lying over the dorsal part of the MPFL close to the MCL. The MPFL was completely cut in two cases in the central part of the ligament. In four cases the MPFL was partially dissected or perforated by a screw and fixed to the femur by the plate. The MCL was intact and not impinged by the implant in any case. In total four of eight knees the capsule was transected or perforated by a screw or by a part of the plate, resulting in intraarticular implant placement. Standard plate placement during TH on the distal medial femur frequently leads to damage to the MPFL, impingement of the MPFL, the capsular and synovial tissues or exposure of the knee joint.

  9. Modified sewage sludge as temporary landfill cover material

    Directory of Open Access Journals (Sweden)

    Jun He

    2015-07-01

    Full Text Available In order to study the feasibility of modified sewage sludge as landfill cover material and its performance in a complex landfill environment, strength and hydraulic conductivity tests were conducted. The permeability requirements for daily and interim covers were analyzed first. Based on saturated-unsaturated seepage calculations, it is suggested that approximately 1.0 × 10−4 cm/s and 1.0 × 10−5 cm/s are the appropriate values for the hydraulic conductivities of daily and interim covers, respectively. The strength and permeability requirements of the mixtures, when used as an interim cover, can be met at a sludge:lime:cement:silt:tire-derived aggregate (TDA weight ratio of 100:15:5:70:15. Results also demonstrate that the solid content ratio of modified sewage sludge, which should be greater than 60% when modified sewage sludge is used as a temporary cover material, is crucial to both strength and hydraulic performance. In addition, as the duration of soaking of modified sewage sludge in synthetic leachate increases, the unconfined compressive strength increases, and the hydraulic conductivity decreases slightly or fluctuates between 1.0 × 10−5 cm/s and 1.0 × 10−6 cm/s, still meeting the requirements for an interim cover. The reduction in hydraulic conductivity of modified sewage sludge under the effect of synthetic leachate, as well as the long-term and environmental performance of the modified sewage sludge, should be examined in future studies.

  10. IgM-mediated autoimmune responses directed against anchorage epitopes are greater in Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) than in major depression.

    Science.gov (United States)

    Maes, Michael; Mihaylova, Ivana; Kubera, Marta; Leunis, Jean-Claude; Twisk, Frank N M; Geffard, Michel

    2012-12-01

    Myalgic Encephalomyelitis/Chronic Fatigue Syndrome (ME/CFS) and depression are considered to be neuro-immune disorders (Maes and Twisk, BMC Medicine 8:35, 2010). There is also evidence that depression and ME/CFS are accompanied by oxidative and nitrosative stress (O&NS) and by increased autoantibodies to a number of self-epitopes some of which have become immunogenic due to damage by O&NS. The aim of this study is to examine IgM-mediated autoimmune responses to different self-epitopes in ME/CFS versus depression. We examined serum IgM antibodies to three anchorage molecules (palmitic and myristic acid and S-farnesyl-L-cysteine); acetylcholine; and conjugated NO-modified adducts in 26 patients with major depression; 16 patients with ME/CFS, 15 with chronic fatigue; and 17 normal controls. Severity of fatigue and physio-somatic (F&S) symptoms was measured with the Fibromyalgia and Chronic Fatigue Syndrome Rating Scale. Serum IgM antibodies to the three anchorage molecules and NO-phenylalanine were significantly higher in ME/CFS than in depression. The autoimmune responses to oxidatively, but not nitrosatively, modified self-epitopes were significantly higher in ME/CFS than in depression and were associated with F&S symptoms. The autoimmune activity directed against conjugated acetylcholine did not differ significantly between ME/CFS and depression, but was greater in the patients than controls. Partially overlapping pathways, i.e. increased IgM antibodies to a multitude of neo-epitopes, underpin both ME/CFS and depression, while greater autoimmune responses directed against anchorage molecules and oxidatively modified neo-epitopes discriminate patients with ME/CFS from those with depression. These autoimmune responses directed against neoantigenic determinants may play a role in the dysregulation of key cellular functions in both disorders, e.g. intracellular signal transduction, cellular differentiation and apoptosis, but their impact may be more important in ME

  11. Is temporary employment damaging to health? A longitudinal study on Italian workers.

    Science.gov (United States)

    Pirani, Elena; Salvini, Silvana

    2015-01-01

    Working conditions have changed dramatically over recent decades in all the countries of European Union: permanent full-time employment characterized by job security and a stable salary is replaced more and more by temporary work, apprenticeship contracts, casual jobs and part-time work. The consequences of these changes on the general well-being of workers and their health represent an increasingly important path of inquiry. We add to the debate by answering the question: are Italian workers on temporary contracts more likely to suffer from poor health than those with permanent jobs? Our analysis is based on a sample of men and women aged 16-64 coming from the Italian longitudinal survey 2007-2010 of the European Union Statistics on Income and Living Conditions. We use the method of inverse-probability-of-treatment weights to estimate the causal effect of temporary work on self-rated health, controlling for selection effects. Our major findings can be summarized as follows: firstly, we show a negative association between temporary employment and health that results from a statistical causal effect in the work-to-health direction, and does not trivially derive from a selection of healthier individuals in the group of people who find permanent jobs (selection effect). Secondly, we find that temporary employment becomes particularly negative for the individual's health when it is prolonged over time. Thirdly, whereas temporary employment does not entail significant adverse consequences for men, the link between temporary employment and health is strongly harmful for Italian women. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Personal use of hair dyes and temporary black tattoos in Copenhagen hairdressers.

    Science.gov (United States)

    Hansen, Henriette S; Johansen, Jeanne D; Thyssen, Jacob P; Linneberg, Allan; Søsted, Heidi

    2010-06-01

    Hairdressers are occupationally and personally exposed to hair dye substances and adverse reactions from the skin are well known. Currently, little is known about personal exposure to hair dye ingredients and temporary black tattoos. To investigate hairdressers' professional and personal risk exposures and to compare the frequency of temporary tattoos among hairdressers and subjects from the general population. A questionnaire was sent to 1679 Copenhagen hairdressers and 1063 (63.3%) responded; 3471 subjects from the general population in Copenhagen were asked about temporary black tattoos. Of the female hairdressers, 38.3% had coloured hair within the previous week. Adverse skin reactions to own hair dye were reported in 29.5%. In the hairdresser population, no significant association was observed between self-reported adverse skin reactions to hair dye and having had a temporary black tattoo when adjusted for sex, age, and atopy. A total of 19.0% of hairdressers (43.5% of apprentices) and 6.3% of participants from the general population had ever had a temporary black tattoo performed at one point. There were no differences in frequency of eczema after temporary tattooing between hairdressers and subjects in the general population. Almost all hairdressers (99.2%) used gloves for hair colouring, 51% for high/low lighting, 39.6% for perming and 21.1% used gloves for shampooing. In conclusion, skin reactions to hair colour are frequent among Copenhagen hairdressers. Temporary black tattoos were more frequent among hairdressers than in a sample of the general population and increased with decreasing age.

  13. Rectal cancer patients' quality of life with a temporary stoma: shifting perspectives.

    Science.gov (United States)

    Neuman, Heather B; Park, Jason; Fuzesi, Sarah; Temple, Larissa K

    2012-11-01

    Patients with rectal cancer who have a temporary ostomy report good quality of life despite identifying a number of stoma-related difficulties. This study aimed to qualitatively explore the experiences of patients with rectal cancer who have a temporary ileostomy to better understand the discordant findings of previous quantitative quality-of-life studies. We conducted in-depth qualitative interviews with patients with stage I to III rectal cancer who underwent sphincter-preserving surgery that resulted in a temporary ileostomy. Twenty-six patients (54% male, median age 54) participated. Sixty-five percent had stage III disease, and 88% received neoadjuvant therapy. Interviews examined preoperative expectations, overall experience, and stoma impact on quality of life. With the use of grounded theory, 2 investigators independently performed line-by-line content analysis to identify key themes. Analysis continued until data saturation. Two major themes were identified: stoma-related difficulties and perceived response shift. Patients reported difficulty in exercise, sleep, social activities, sexuality, and clothing. Patients' perception of quality of life with a temporary stoma appears to have undergone a response shift through recalibration of their standards for measuring quality of life (internal measurement scale altered by side effects of neoadjuvant/adjuvant treatment, temporary nature of stoma, and accommodation to stoma) and reconceptualization of what "good quality of life" is (stoma difficulties were felt to be less important in comparison with cancer-related mortality). Although qualitative research is, by design, not generalizable, these data support our previous quantitative work. This convergence of findings suggests that our data may be representative. A temporary ileostomy represents significant difficulties for patients with rectal cancer. However, because of response shift, these difficulties may not be perceived as important to overall quality of

  14. Conditions of Proper Interaction of Low-Pressure Injection Piles (LIP) with Structure and Soil, Carrying Capacity of Pile Anchorage in Foundation

    Science.gov (United States)

    Pachla, Henryk

    2016-12-01

    The formation of a pile in the existing foundation and soil creates a new foundation construction which has a structure of foundation-pile-soil. This construction must be able to transfer loads from the foundation to the pile and from the pile to the soil. The pile structure has to transfer an imposed load. From the point of view of continuum mechanics determination of the capacity of such a system is preceded by the analysis of contact problem of three contact surfaces. Each of these surfaces is determined by different pairs of materials. The pair which creates a pile anchorage is a material from which the foundation is built (structure of stone and grout, brick and grout, concrete or reinforced concrete and grout. The pile structure is formed by grout and steel rebar. The pile formed in soil is created by a pair of grout and soil. What is important is that on contact surfaces the materials adhering to one another are subjected to different deformation types that are controlled by mechanical properties and geometry of these surfaces. In the paper, additional conditions that should be fulfilled for the foundation-pile-soil system to make load transfer from foundation to soil possible and safe are presented. The results of research done by the author on foundation-pile contact surface are discussed. The tests were targeted at verifying the bearing capacity of anchorage and deformation of piles made of grout and other materials from which foundations are built. The specimens were tested in tension and compression. The experiments were conducted on the amount specimens which is regarded as small sample to enable the statistical analysis of the results.

  15. Evaluation of primary stability of innovated orthodontic miniscrew system (STS): An ex-vivo study.

    Science.gov (United States)

    Seifi, Massoud; Matini, Negin-Sadat

    2016-07-01

    Stability is determined as one of the requirements in use of Temporary Anchorage Devices (TAD) in orthodontics. Miniscrew has been a widely used Bone Anchor. Compared with mini-implant that necessitates osseointegration; mechanical retention is a determining factor for primary stability of miniscrew. Studies investigated various ways to increase primary stability. The aim of this study is to introduce a new configuration of miniscrew system which is believed to obtain more primary stability. Freshly ovine mandibles were cut in blocks. Twenty-seven miniscrews (diameter 1.6 × 8 mm; G2, Dual Top Anchor System, Jeil Medical, Seoul, Korea) were inserted in the blocks and divided in 2 experimental groups: single miniscrew and the innovated design "Seifi Twin Screw (STS)". Primary stability was evaluated by Periotest "M"® device. Independent t-test showed a significant difference between 2 experimental groups in periotest evaluation (pstability due to its mechanical configuration and design. The STS provides higher primary stability and was found to be effective in increased success rate of miniscrew systems from the standpoint of primary stability. Anchorage procedures, anchorage techniques, orthodontic anchorage procedures, miniscrews, temporary anchorage device.

  16. Space, place and body: temporary coalitions, nodes in a network

    Directory of Open Access Journals (Sweden)

    Kerith Power

    2012-12-01

    Full Text Available The articles in this collection share a concern for place, space and bodies as frameworks for thinking about and conducting educational research. The authors range in experience from senior academics, independent educators, beginning and emerging new researchers spanning a range of educational sectors. The articles originate from connections forged within and between Australia and northern countries with visits back and forth between 2004 and 2010. Some of the writers have met each other in these travels and others have not. All have encountered and participated in some way in the work of the space place and body research group, which originated in 2007 as a named research ‘node’ at Monash University.   The space place and body group formed as a result of a process designed to re-imagine research in the Faculty of Education at Monash University in order to address ‘the big questions of our time’. As a leading global university with campuses in Asia and Europe as well as several in Australia, the Dean of the Faculty cited recent evidence that the field of educational research had become too narrowly focused and that new approaches were needed to enliven the field and move it forward. Individualistic research was no longer supported and groups were formed organically around coalitions of interest. The purpose of the space place and body group was to come together to generate new conceptual, theoretical and methodological resources within the core concepts of space, place and body by collaborating across our differences. In the early phase of our development we focused on linked identity (ontological and knowledge (epistemological work, at the intersection of postcolonial and poststructural approaches to place in educational research. A specific interest in alternative and creative methodologies emerged from these onto-epistemological activities.   As part of our process we initiated temporary definitions of space, place and body, to

  17. Geomorphological evolution of a newly restored upland temporary stream

    Science.gov (United States)

    Marteau, Baptiste; Batalla, Ramon J.; Gibbins, Chris N.; Green, David R.; Vericat, Damià

    2015-04-01

    The river Ehen, NW England, has been designated as a Special Area of Conservation (SAC) as it hosts England's largest population of freshwater pearl mussels (M. margaritifera). One of the Ehen's main headwater tributary, Ben Gill, was diverted to Ennerdale Lake in the 1970s to help increase the volume of water available for abstraction. Concerns over this diversion on the hydrology and sediment dynamics of the Ehen has led to the reconnection of this temporary stream as part of a project designed to improve habitat conditions for mussels in the Ehen. The reconnection has involved the construction of a new section of channel, following the natural (pre-diversion) course of Ben Gill. This paper presents findings of research designed to track the morphological evolution of the newly created Ben Gill channel. The work follows a previous research in which fluvial dynamics in the Ehen were studied before the reconnection of Ben Gill. Morpho-sedimentary dynamics are analysed at multiple scales: from the movement of individual particles, to changes on channel morphology following competent flow events. Changes in the channel's grain size distributions have been investigated in different sections, while bed mobility has been assessed using a combination of radio frequency identification (RFID) tags inserted into representative particles and painted bed patches. Additionally, digital elevation models (DEMs) of the entire new channel have been constructed by means of automatic digital photogrammetry using high resolution aerial photography taken by an unmanned aerial vehicle (UAV). DEMs of difference (DoD) between major flow events have been used to track lateral and longitudinal changes in the channel at a spatial resolution of less than 5cm. Finally, in order to link sedimentological changes in the new channel to its impact on the main stem Ehen, morpho-sedimentary changes of a gravel bar at the confluence have been monitored combining tracers (i.e. RFID) and repeated

  18. Evaluation of the temporary cavity in ordnance gelatine.

    Science.gov (United States)

    Schyma, C; Madea, B

    2012-01-10

    Gelatine is a recognized tissue simulant in wound ballistic research. The deceleration of a bullet causes a temporary cavity which provokes radial fissures by stretching the gelatine. The evaluation of gelatine destruction was performed with very different methods yet, widely known are the wound profile by Fackler and the total crack length (TCL) method. Aims of the presented experimental study were to cover a wide range of kinetic bullet energy, to gather all destruction associated parameters and to correlate them to energy dissipation. According to recommendations of the Technical Guideline Commission of the German police and to Fackler, a 10% solution of Gelita Ballistic 3 gelatine was moulded in 20 cm × 20 cm × 50 cm dimensioned blocks. In the front of the blocks a 2 mm thin and 8 cm × 8 cm film bag containing about 8 g pasty acryl paint was integrated. The blocks were cooled to 4°C and were shot from a distance of 5m. The bullet's velocity was measured in front of the target. The expanding bullets Silvertip(®) (Winchester) und First Defense(®) (Magtech) were used. Varying calibres, loads and barrel lengths bullet velocities from 250 to 686 m/s were achieved while kinetic energy was spread from 71 up to 1450 J. All projectiles were captured in gelatine and had mushroomed, as expected. The blocks were freshly cut into 1cm-slices which were optically scanned. The evaluation was performed with AxioVision (Zeiss) software and in each slice the following parameters were taken: longest fissure radius, wound profile (addition of the two longest fissures), sum of the three longest cracks, TCL, perimeter and area of the polygon created by linking the fissure ends. All analyzed parameters - either crack length based methods (wound profile and the TCL) or destruction area based methods (polygon method) - showed a strong dependence of the gelatine destruction and the energy dissipated. This regularity could be approximated by linear function (correlation coefficient

  19. Function Activation on Intelligent Buildings Using Mobile Devices through Voice Commands

    OpenAIRE

    Moumtadi Fatima; Granados-Lovera Fabián; Delgado-Hernández Julio Carlos

    2014-01-01

    Development of information and communication technologies has allowed the incorporation into different areas of human activity of apps that control electrical and electronic devices through voice commands. With these apps, in telemedicine people affected by some temporary decrease in their physical capacities have improved their level of autonomy; utilities have been added to educational environments to facilitate the use of IT applications to users with physical disability; finally, home aut...

  20. Influence of temporary cement contamination on the surface free energy and dentine bond strength of self-adhesive cements.

    Science.gov (United States)

    Takimoto, Masayuki; Ishii, Ryo; Iino, Masayoshi; Shimizu, Yusuke; Tsujimoto, Akimasa; Takamizawa, Toshiki; Ando, Susumu; Miyazaki, Masashi

    2012-02-01

    The surface free energy and dentine bond strength of self-adhesive cements were examined after the removal of temporary cements. The labial dentine surfaces of bovine mandibular incisors were wet ground with #600-grit SiC paper. Acrylic resin blocks were luted to the prepared dentine surfaces using HY Bond Temporary Cement Hard (HY), IP Temp Cement (IP), Fuji TEMP (FT) or Freegenol Temporary Cement (TC), and stored for 1 week. After removal of the temporary cements with an ultrasonic tip, the contact angle values of five specimens per test group were determined for the three test liquids, and the surface-energy parameters of the dentine surfaces were calculated. The dentine bond strengths of the self-adhesive cements were measured after removal of the temporary cements in a shear mode at a crosshead speed of 1.0mm/min. The data were subjected to one-way analysis of variance (ANOVA) followed by Tukey's HSD test. For all surfaces, the value of the estimated surface tension component γ(S)(d) (dispersion) was relatively constant at 41.7-43.3 mJm(-2). After removal of the temporary cements, the value of the γ(S)(h) (hydrogen-bonding) component decreased, particularly with FT and TC. The dentine bond strength of the self-adhesive cements was significantly higher for those without temporary cement contamination (8.2-10.6 MPa) than for those with temporary cement contamination (4.3-7.1 MPa). The γ(S) values decreased due to the decrease of γ(S)(h) values for the temporary cement-contaminated dentine. Contamination with temporary cements led to lower dentine bond strength. The presence of temporary cement interferes with the bonding performance of self-adhesive cements to dentine. Care should be taken in the methods of removal of temporary cement when using self-adhesive cements. Copyright © 2011 Elsevier Ltd. All rights reserved.