Sample records for temporal damping effect

  1. Damping Effect of Humans

    DEFF Research Database (Denmark)

    Pedersen, Lars

    system and change its dynamic behavior and its dynamic characteristics. When predicting structural vibrations it is not common to account for the passive crowd, but the paper will illustrate effects of the presence of a passive croud on structural behavior. Numerical and experimental results...

  2. Bryan's effect and anisotropic nonlinear damping (United States)

    Joubert, Stephan V.; Shatalov, Michael Y.; Fay, Temple H.; Manzhirov, Alexander V.


    In 1890, G. H. Bryan discovered the following: "The vibration pattern of a revolving cylinder or bell revolves at a rate proportional to the inertial rotation rate of the cylinder or bell." We call this phenomenon Bryan's law or Bryan's effect. It is well known that any imperfections in a vibratory gyroscope (VG) affect Bryan's law and this affects the accuracy of the VG. Consequently, in this paper, we assume that all such imperfections are either minimised or eliminated by some known control method and that only damping is present within the VG. If the damping is isotropic (linear or nonlinear), then it has been recently demonstrated in this journal, using symbolic analysis, that Bryan's law remains invariant. However, it is known that linear anisotropic damping does affect Bryan's law. In this paper, we generalise Rayleigh's dissipation function so that anisotropic nonlinear damping may be introduced into the equations of motion. Using a mixture of numeric and symbolic analysis on the ODEs of motion of the VG, for anisotropic light nonlinear damping, we demonstrate (up to an approximate average), that Bryan's law is affected by any form of such damping, causing pattern drift, compromising the accuracy of the VG.

  3. Anti-damping effect of radiation reaction

    International Nuclear Information System (INIS)

    Wang, G; Yuan, X Z; Li, H; Shen, Y F; Zi, J


    The anti-damping effect of radiation reaction, which means the radiation reaction does non-negative work on a radiating charge, is investigated at length by using the Lorentz-Dirac equation (LDE) for the motion of a point charge respectively acted on by (a) a pure electric field, (b) a pure magnetic field and (c) the fields of an electromagnetic wave. We found that the curvature of the charge's trajectory plays an important role in the radiation reaction force, and the anti-damping effect cannot take place for the real macroscopic motions of a point charge. The condition for this anti-damping effect to take place is that the gradient of the external force field must exceed a certain value over the region of magnitude of the classical radius of massive charges (∼10 -15 m). Our results are potentially helpful to lessen the controversy on LDE and justify it as the correct classical equation describing the radiating charge's motion. If this anti-damping effect of LDE were a real existing physical process, it could serve as a mechanism within the context of classical electrodynamics for the stability of hydrogen atoms. Using the picture of an electron in quantum electrodynamics, namely the negative bare charge surrounded by the polarized positive charges of vacuum, we can obtain a reasonable explanation for the energy transferred to the electron during the occurrence of the anti-damping effect, on which the venerable work of Wheeler and Feynman has thrown some light.

  4. DAMPE

    CERN Multimedia

    Chen, D

    The $\\textbf{DA}$rk $\\textbf{M}$atter $\\textbf{P}$article $\\textbf{E}$xplorer (DAMPE) experiment is a high-energy astroparticle physics satellite mission to search for Dark Matter signatures in space, study the cosmic ray spectrum and composition up to 100 TeV, and perform high-energy gamma astronomy. The launch is planned for end 2015, initially for 3 years, to compliment existing space missions FERMI, AMS and CALET.

  5. Collective Effects in the CLIC Damping Rings

    CERN Document Server

    Zimmermann, Frank; Korostelev, Maxim S; Schulte, Daniel; Yokoya, Kaoru


    The small emittance, short bunch length, and high current in the CLIC damping ring could give rise to collective effects which degrade the quality of the extracted beam. In this paper, we survey a number of possible instabilities and estimate their impact on the ring performance. The effects considered include fast beam-ion instability, coherent synchrotron radiation, Touschek scattering, intrabeam scattering, resistive-wall wake fields, and electron cloud.

  6. Preliminary Study on the Damping Effect of a Lateral Damping Buffer under a Debris Flow Load

    Directory of Open Access Journals (Sweden)

    Zheng Lu


    Full Text Available Simulating the impact of debris flows on structures and exploring the feasibility of applying energy dissipation devices or shock isolators to reduce the damage caused by debris flows can make great contribution to the design of disaster prevention structures. In this paper, we propose a new type of device, a lateral damping buffer, to reduce the vulnerability of building structures to debris flows. This lateral damping buffer has two mechanisms of damage mitigation: when debris flows impact on a building, it acts as a buffer, and when the structure vibrates due to the impact, it acts as a shock absorber, which can reduce the maximum acceleration response and subsequent vibration respectively. To study the effectiveness of such a lateral damping buffer, an impact test is conducted, which mainly involves a lateral damping buffer attached to a two-degree-of-freedom structure under a simulated debris flow load. To enable the numerical study, the equation of motion of the structure along with the lateral damping buffer is derived. A subsequent parametric study is performed to optimize the lateral damping buffer. Finally, a practical design procedure is also provided.

  7. Air damping effect on the air-based CMUT operation (United States)

    Cha, Bu-Sang; Kanashima, Takeshi; Lee, Seung-Mok; Okuyama, Masanori


    The vibration amplitude, damping ratio and viscous damping force in capacitive micromachinedultrasonic transducers (CMUTs) with a perforated membrane have been calculated theoretically and compared with the experimental data on its vibration behavior. The electrical bias of the DC and the AC voltages and the operation frequency conditions influence the damping effect because leads to variations in the gap height and the vibration velocity of the membrane. We propose a new estimation method to determine the damping ratio by the decay rate of the vibration amplitudes of the perforated membrane plate are measured using a laser vibrometer at each frequency, and the damping ratios were calculated from those results. The influences of the vibration frequency and the electrostatic force on the damping effect under the various operation conditions have been studied.

  8. Effective mass and damping of submerged structures

    Energy Technology Data Exchange (ETDEWEB)

    Dong, R.G.


    Various structures important for safety in nuclear power plants must remain functioning in the event of an earthquake or other dynamic phenomenon. Some of these important structures, such as spent-fuel storage racks, main pressure-relief valve lines, and internal structures in the reactor vessel, are submerged in water. Dynamic analysis must include the force and damping effects of water. This report provides a technical basis for evaluating the wide variety of modeling assumptions currently used in design analysis. Current design analysis techniques and information in the literature form the basis of our conclusions and recommendations. We surveyed 32 industrial firms and reviewed 49 technical references. We compare various theories with published experimental results wherever possible. Our findings generally pertain to idealized structures, such as single isolated members, arrays of members, and coaxial cylinders. We relate these findings to the actual reactor structures through observations and recommendations. Whenever possible we recommend a definite way to evaluate the effect of hydrodynamic forces on these structures.

  9. Effective mass and damping of submerged structures

    International Nuclear Information System (INIS)

    Dong, R.G.


    Various structures important for safety in nuclear power plants must remain functioning in the event of an earthquake or other dynamic phenomenon. Some of these important structures, such as spent-fuel storage racks, main pressure-relief valve lines, and internal structures in the reactor vessel, are submerged in water. Dynamic analysis must include the force and damping effects of water. This report provides a technical basis for evaluating the wide variety of modeling assumptions currently used in design analysis. Current design analysis techniques and information in the literature form the basis of our conclusions and recommendations. We surveyed 32 industrial firms and reviewed 49 technical references. We compare various theories with published experimental results wherever possible. Our findings generally pertain to idealized structures, such as single isolated members, arrays of members, and coaxial cylinders. We relate these findings to the actual reactor structures through observations and recommendations. Whenever possible we recommend a definite way to evaluate the effect of hydrodynamic forces on these structures

  10. A new solvent suppression method via radiation damping effect (United States)

    Cui, Xiao-Hong; Peng, Ling; Zhang, Zhen-Min; Cai, Shu-Hui; Chen, Zhong


    Radiation damping effects induced by the dominated solvent in a solution sample can be applied to suppress the solvent signal. The precession pathway and rate back to equilibrium state between solute and solvent spins are different under radiation damping. In this paper, a series of pulse sequences using radiation damping were designed for the solvent suppression in nuclear magnetic resonance (NMR) spectroscopy. Compared to the WATERGATE method, the solute signals adjacent to the solvent would not be influenced by using the radiation damping method. The one-dimensional (1D) 1H NMR, two-dimensional (2D) gCOSY, and J-resolved experimental results show the practicability of solvent suppression via radiation damping effects in 1D and 2D NMR spectroscopy.

  11. Overview of collective effects in the NLC main damping rings

    International Nuclear Information System (INIS)

    Wolski, A.; Santis, S. de


    The present design for the NLC Main Damping Rings (MDRs) meets the specifications for acceptance and extracted emittance, in the limit of zero current. However, the relatively large bunch charge and moderate energy mean that a variety of collective effects can impact the beam dynamics, leading to loss of stability or increase of equilibrium emittance. These effects include intrabeam scattering, impedance from numerous sources, fast ion instability, and (in the positron ring) electron cloud. In this note, we survey the expected impact on damping ring performance from each of a number of collective effects, and discuss the priorities for future studies in this area

  12. Damping Effects Induced by a Mass Moving along a Pendulum

    Directory of Open Access Journals (Sweden)

    E. Gandino


    Full Text Available The experimental study of damping in a time-varying inertia pendulum is presented. The system consists of a disk travelling along an oscillating pendulum: large swinging angles are reached, so that its equation of motion is not only time-varying but also nonlinear. Signals are acquired from a rotary sensor, but some remarks are also proposed as regards signals measured by piezoelectric or capacitive accelerometers. Time-varying inertia due to the relative motion of the mass is associated with the Coriolis-type effects appearing in the system, which can reduce and also amplify the oscillations. The analytical model of the pendulum is introduced and an equivalent damping ratio is estimated by applying energy considerations. An accurate model is obtained by updating the viscous damping coefficient in accordance with the experimental data. The system is analysed through the application of a subspace-based technique devoted to the identification of linear time-varying systems: the so-called short-time stochastic subspace identification (ST-SSI. This is a very simple method recently adopted for estimating the instantaneous frequencies of a system. In this paper, the ST-SSI method is demonstrated to be capable of accurately estimating damping ratios, even in the challenging cases when damping may turn to negative due to the Coriolis-type effects, thus causing amplifications of the system response.

  13. Simulations of moving effect of coastal vegetation on tsunami damping (United States)

    Tsai, Ching-Piao; Chen, Ying-Chi; Octaviani Sihombing, Tri; Lin, Chang


    A coupled wave-vegetation simulation is presented for the moving effect of the coastal vegetation on tsunami wave height damping. The problem is idealized by solitary wave propagation on a group of emergent cylinders. The numerical model is based on general Reynolds-averaged Navier-Stokes equations with renormalization group turbulent closure model by using volume of fluid technique. The general moving object (GMO) model developed in computational fluid dynamics (CFD) code Flow-3D is applied to simulate the coupled motion of vegetation with wave dynamically. The damping of wave height and the turbulent kinetic energy along moving and stationary cylinders are discussed. The simulated results show that the damping of wave height and the turbulent kinetic energy by the moving cylinders are clearly less than by the stationary cylinders. The result implies that the wave decay by the coastal vegetation may be overestimated if the vegetation was represented as stationary state.

  14. The Effect of Intertia, Visocus Damping, Temperature and Normal ...

    Indian Academy of Sciences (India)


    In general, a slight variation in either of inertia, viscous damping, temperature and effective normal stress reduces the chaotic behaviour of the sliding system. However, the present study has shown the appearance of chaos for specific values of normal stress before it disappears again as the normal stress varies further.

  15. The effect of inertia, viscous damping, temperature and normal ...

    Indian Academy of Sciences (India)

    Nitish Sinha


    Apr 16, 2018 ... A fundamental understanding of frictional sliding at rock surfaces is of practical importance for nucleation and propagation of earthquakes and rock slope stability. We investigate numerically the effect of different physical parameters such as inertia, viscous damping, temperature and normal stress on the ...

  16. Damping Effects of Drogue Parachutes on Orion Crew Module Dynamics (United States)

    Aubuchon, Vanessa V.; Owens, D. Bruce


    Because simulations of the Orion Crew Module (CM) dynamics with drogue parachutes deployed were under-predicting the amount of damping seen in free-flight tests, an attach-point damping model was applied to the Orion system. A key hypothesis in this model is that the drogue parachutes' net load vector aligns with the CM drogue attachment point velocity vector. This assumption seems reasonable and has historically produced good results, but has never been experimentally verified. The wake of the CM influences the drogue parachutes, which makes performance predictions of the parachutes difficult. Many of these effects are not currently modeled in the simulations. A forced oscillation test of the CM with parachutes was conducted in the NASA LaRC 20-Ft Vertical Spin Tunnel (VST) to gather additional data to validate and refine the attach-point damping model. A second loads balance was added to the original Orion VST model to measure the drogue parachute loads independently of the CM. The objective of the test was to identify the contribution of the drogues to CM damping and provide additional information to quantify wake effects and the interactions between the CM and parachutes. The drogue parachute force vector was shown to be highly dependent on the CM wake characteristics. Based on these wind tunnel test data, the attach-point damping model was determined to be a sufficient approximation of the parachute dynamics in relationship to the CM dynamics for preliminary entry vehicle system design. More wake effects should be included to better model the system.

  17. Allergy and respiratory health effects of dampness and dampness-related agents in schools and homes

    DEFF Research Database (Denmark)

    Holst, G; Høst, A; Doekes, G


    ), forced vital capacity (zFVC) and the ratio zFEV1 /zFVC using GLI-2012-prediction-equations. The parents reported children's allergies, airway symptoms and doctor-diagnosed asthma. High classroom dampness, but not bedroom dampness, was negatively associated with zFEV1 (β-coef. -0.71; 95%CI -1.17 - -0...

  18. Shunted Piezoelectric Vibration Damping Analysis Including Centrifugal Loading Effects (United States)

    Min, James B.; Duffy, Kirsten P.; Provenza, Andrew J.


    Excessive vibration of turbomachinery blades causes high cycle fatigue problems which require damping treatments to mitigate vibration levels. One method is the use of piezoelectric materials as passive or active dampers. Based on the technical challenges and requirements learned from previous turbomachinery rotor blades research, an effort has been made to investigate the effectiveness of a shunted piezoelectric for the turbomachinery rotor blades vibration control, specifically for a condition with centrifugal rotation. While ample research has been performed on the use of a piezoelectric material with electric circuits to attempt to control the structural vibration damping, very little study has been done regarding rotational effects. The present study attempts to fill this void. Specifically, the objectives of this study are: (a) to create and analyze finite element models for harmonic forced response vibration analysis coupled with shunted piezoelectric circuits for engine blade operational conditions, (b) to validate the experimental test approaches with numerical results and vice versa, and (c) to establish a numerical modeling capability for vibration control using shunted piezoelectric circuits under rotation. Study has focused on a resonant damping control using shunted piezoelectric patches on plate specimens. Tests and analyses were performed for both non-spinning and spinning conditions. The finite element (FE) shunted piezoelectric circuit damping simulations were performed using the ANSYS Multiphysics code for the resistive and inductive circuit piezoelectric simulations of both conditions. The FE results showed a good correlation with experimental test results. Tests and analyses of shunted piezoelectric damping control, demonstrating with plate specimens, show a great potential to reduce blade vibrations under centrifugal loading.

  19. Effect of squeeze on electrostatic Trivelpiece-Gould wave damping (United States)

    Ashourvan, Arash; Dubin, Daniel H. E.


    We present a theory for increased damping of Trivelpiece-Gouid plasma modes on a nonneutral plasma column, due to application of a Debye shielded cylindrically symmetric squeeze potential φ1. We present two models of the effect this has on the plasma modes: a 1D model with only axial dependence, and a 2D model that also keeps radial dependence in the squeezed equilibrium and the mode. We study the models using both analytical and numerical methods. For our analytical studies, we assume that φ1/T≪1, and we treat the Debye shielded squeeze potential as a perturbation in the equilibrium Hamiltonian. Our numerical simulations solve the 1D Vlasov-Poisson system and obtain the frequency and damping rate for a self-consistent plasma mode, making no assumptions as to the size of the squeeze. In both the 1D and 2D models, damping of the mode is caused by Landau resonances at energies En for which the particle bounce frequency ωb(En) and the wave frequency ω satisfy ω =nωb(En). Particles experience a non-sinusoidal wave potential along their bounce orbits due to the squeeze potential. As a result, the squeeze induces bounce harmonics with n > 1 in the perturbed distribution. The harmonics allow resonances at energies En≤T that cause substantial damping, even when wave phase velocities are much larger than the thermal velocity. In the regime ω /k≫√T /m (k is the wave number) and T ≫φ1, the resonance damping rate has a |φ1|2 dependence. This dependence agrees with the simulations and experimental results.

  20. Effect of squeeze on electrostatic Trivelpiece-Gould wave damping

    Energy Technology Data Exchange (ETDEWEB)

    Ashourvan, Arash; Dubin, Daniel H. E. [Department of Physics, University of California at San Diego, La Jolla, California 92093 (United States)


    We present a theory for increased damping of Trivelpiece-Gouid plasma modes on a nonneutral plasma column, due to application of a Debye shielded cylindrically symmetric squeeze potential φ{sub 1}. We present two models of the effect this has on the plasma modes: a 1D model with only axial dependence, and a 2D model that also keeps radial dependence in the squeezed equilibrium and the mode. We study the models using both analytical and numerical methods. For our analytical studies, we assume that φ{sub 1}/T≪1, and we treat the Debye shielded squeeze potential as a perturbation in the equilibrium Hamiltonian. Our numerical simulations solve the 1D Vlasov-Poisson system and obtain the frequency and damping rate for a self-consistent plasma mode, making no assumptions as to the size of the squeeze. In both the 1D and 2D models, damping of the mode is caused by Landau resonances at energies E{sub n} for which the particle bounce frequency ω{sub b}(E{sub n}) and the wave frequency ω satisfy ω=nω{sub b}(E{sub n}). Particles experience a non-sinusoidal wave potential along their bounce orbits due to the squeeze potential. As a result, the squeeze induces bounce harmonics with n > 1 in the perturbed distribution. The harmonics allow resonances at energies E{sub n}≤T that cause substantial damping, even when wave phase velocities are much larger than the thermal velocity. In the regime ω/k≫√(T/m) (k is the wave number) and T≫φ{sub 1}, the resonance damping rate has a |φ{sub 1}|{sup 2} dependence. This dependence agrees with the simulations and experimental results.

  1. Experimental Studies of Welding Effects on Damping for Undersea Warfare Applications

    National Research Council Canada - National Science Library

    Carey, Agustin


    .... The purpose of this research is to study the effects that welding has on damping. Measurements and comparisons of the damping ratios of two welded stiffened plates, two flat plates and one machined stiffened plate are undertaken...

  2. Rheology behavior and optimal damping effect of granular particles in a non-obstructive particle damper (United States)

    Zhang, Kai; Chen, Tianning; Wang, Xiaopeng; Fang, Jianglong


    To explore the optimal damping mechanism of non-obstructive particle dampers (NOPDs), research on the relationship between the damping performance of NOPDs and the motion mode of damping particles in NOPDs was carried out based on the rheological properties of vibrated granular particles. Firstly, the damping performance of NOPDs under different excitation intensity and gap clearance was investigated via cantilever system experiments, and an approximate evaluation of the effective mass and effective damping of NOPDs was performed by fitting the experimental data to an equivalent single-degree-of-freedom (SDOF) system with no damping particles. Then the phase diagrams which could show the motion mode of damping particles under different excitation intensity and gap clearance were obtained via a series of vibration table tests. Moreover, the dissipation characteristic of damping particles was explored by the discrete element method (DEM). The study results indicate that when NOPDs play the optimal damping effect the granular Leidenfrost effect whereby the entire particle bed in NOPDs is levitated above the vibrating base by a layer of highly energetic particles is observed. Finally, the damping characteristics of NOPDs was explained by collisions and frictions between particle-particle and particle-wall based on the rheology behavior of damping particles and a new dissipation mechanism was first proposed for the optimal damping performance of NOPDs.

  3. Gamma irradiation induced effects of butyl rubber based damping material (United States)

    Chen, Hong-Bing; Wang, Pu-Cheng; Liu, Bo; Zhang, Feng-Shun; Ao, Yin-Yong


    The effects of gamma irradiation on the butyl rubber based damping material (BRP) at various doses in nitrogen were investigated in this study. The results show that irradiation leads to radiolysis of BRP, with extractives increasing from 14.9 ± 0.8% of control to 37.2 ± 1.2% of sample irradiated at 350 kGy, while the swelling ratio increasing from 294 ± 3% to 766 ± 4%. The further investigation of the extractives with FTIR shows that the newly generated extractives are organic compounds containing C-H and C˭C bonds, with molecular weight ranging from 26,500 to 46,300. SEM characterization shows smoother surface with holes disappearing with increasing absorbed doses, consistent with "softer" material because of radiolysis. Dynamic mechanical study of BRP show that tan δ first slightly then obviously increases with increasing absorbed dose, while storage modulus slightly decreases. The tensile testing shows that the tensile strength decreases while the elongation at break increases with increasing dose. The positron annihilation lifetime spectroscopy show no obvious relations between free volume parameters and the damping properties, indicating the complicated influencing factors of damping properties.

  4. Mechanics of damping for fiber composite laminates including hygro-thermal effects (United States)

    Saravanos, D. A.; Chamis, Christos C.


    An integrated mechanics theory was developed for the modeling of composite damping from the micromechanics to the laminate level. Simplified, design oriented equations based on hysteretic damping are presented for on-axis plies, off-axis plies, and laminates including the effect of temperature, moisture, and interply hysteretic damping. The temperature rise within vibrating composite laminates resulting from strain energy dissipation is also modeled, and their coupled hygro-thermo-mechanical response is predicted. The method correlates well with reported damping measurements. Application examples illustrate the effect of various ply, laminate, and hygro-thermal parameters on the overall damping performance of composite laminates.



    Kowaleczko, Grzegorz


    The paper presents evaluation of the jet damping effect on spatial motion of a homing guided missile with variable mass. The mathematical model of motion including effects generated by the burning fuel are presented – changes of mass characteristics as well as the jet damping effect are taken into account. Both the influences of inertia forces/moments and changes of the position of mass center are calculated. The damping effect generating additional forces and moments acting on the missile is...

  6. Dynamic Stall in Pitching Airfoils: Aerodynamic Damping and Compressibility Effects (United States)

    Corke, Thomas C.; Thomas, Flint O.


    Dynamic stall is an incredibly rich fluid dynamics problem that manifests itself on an airfoil during rapid, transient motion in which the angle of incidence surpasses the static stall limit. It is an important element of many manmade and natural flyers, including helicopters and supermaneuverable aircraft, and low-Reynolds number flapping-wing birds and insects. The fluid dynamic attributes that accompany dynamic stall include an eruption of vorticity that organizes into a well-defined dynamic stall vortex and massive excursions in aerodynamic loads that can couple with the airfoil structural dynamics. The dynamic stall process is highly sensitive to surface roughness that can influence turbulent transition and to local compressibility effects that occur at free-stream Mach numbers that are otherwise incompressible. Under some conditions, dynamic stall can result in negative aerodynamic damping that leads to limit-cycle growth of structural vibrations and rapid mechanical failure. The mechanisms leading to negative damping have been a principal interest of recent experiments and analysis. Computational fluid dynamic simulations and low-order models have not been good predictors so far. Large-eddy simulation could be a viable approach although it remains computationally intensive. The topic is technologically important owing to the desire to develop next-generation rotorcraft that employ adaptive rotor dynamic stall control.

  7. Effects of cold-damp and hot-damp environment on VEGF and IL-1 expression in joint cartilage cells in adjuvant arthritis in rats. (United States)

    Bai, Yun-Jing; Jiang, De-xun; An, Na; Shen, Hong-bo; Hu, Yin-qi


    To study the effects of environmental factors on the degree of injury and expression of vascular endothelial growth factor (VEGF) and interleukin-1 (IL-1) in cartilage cells of the joint in a rat model of adjuvant arthritis (AA). SD rats aged 10 months were randomly divided into 4 groups that varied by temperature and humidity housing conditions and induction of AA: a control group, a model group, a cold-damp group, and a hot-damp group. All groups except the control group were induced with AA. After 4 w, VEGF and IL-1 expression in cartilage cells of ankle joints of hind limbs were observed. Mean area, optical density, and numbers of VEGF- and IL-1-positive cells in the model group, the cold-damp group, and the hot-damp group were significantly higher than that of the control group (all P damp group and the hot-damp group were significantly higher than that of the model group (all P damp group were significantly higher than that of the cold-damp group. Bone in the hot-damp and cold-damp groups was severely injured. Environmental factors such as high humidity combined with either high or low temperature increase the severity of damage and expression of VEGF and IL-1 in cartilage cells of joints in rats induced with AA.

  8. The effect of damping on the perception of hardness

    NARCIS (Netherlands)

    van Beek, F.E.; Heck, D.J.F.; Nijmeijer, H.; Bergmann Tiest, W.M.; Kappers, A.M.L.


    In controlling teleoperation systems subject to communication delays, unstable behavior is often prevented by injecting damping. A proper perception of hardness is required to efficiently interact with an object, but it is unknown if and how this injected damping influences the perceived hardness of

  9. Effect of in-structure damping uncertainty on semi-active control performance: a modeling perspective (United States)

    Puthanpurayil, Arun M.; Reynolds, Paul; Nyawako, Donald


    The mathematical model of a vibrating structure includes mass, damping and stiffness; out of which mass and stiffness could be defined as a function of the system geometry, whereas damping is more of an observed phenomenon. Despite having a large literature on the subject, the underlying physics is only known in a phenomenological ad-hoc manner, making damping an overall mystery in the general dynamic analysis of structures. A major reason of this could be the fact that there is no single universally accepted model for damping. Common practice is to use the classical viscous damping model originated by Rayleigh, through his famous `Rayleigh dissipation function', with a preconceived damping ratio, irrespective of the purpose or type of analysis involved. This paper investigates the effect of this modelling uncertainty on the analytical prediction of the required control force in a semi-active control application for civil structures. Global classical Rayleigh damping models and global non-viscous damping models are used in the present study. Responses of a laboratory slab strip are simulated and are compared with experimental responses. The comparisons emphasises the fact that the choice of in-structure damping models has a significant effect in the computation of the required control force. The comparison also clearly indicates that mathematically sophisticated models have better prediction capability as compared to the classical Rayleigh model.

  10. Nontrivial effects of high-frequency excitation for strongly damped mechanical systems

    DEFF Research Database (Denmark)

    Fidlin, Alexander; Thomsen, Jon Juel

    Some nontrivial effects are investigated, which can occur if strongly damped mechanical systems are subjected to strong high-frequency (HF) excitation. The main result is a theoretical prediction, supported by numerical simulation, that for such systems the (quasi-)equilibrium states can change...... that can be substantial (depending on the strength of the HF excitation) for finite values of the damping. The analysis is focused on the differences between the classic results for weakly damped systems, and new effects for which the strong damping terms are responsible. The analysis is based...... on a slightly modified averaging technique, and includes an elementary example of an elliptically excited pendulum for illustration, alongside with a generalization to a broader class of strongly damped dynamical systems with HF excitation. As an application example, the nontrivial behavior of a classical...

  11. Nontrivial effects of high-frequency excitation for strongly damped mechanical systems

    DEFF Research Database (Denmark)

    Fidlin, Alexander; Thomsen, Jon Juel


    Some non-trivial effects are investigated, which can occur if strongly damped mechanical systems are subjected to strong high-frequency (HF) excitation. The main result is a theoretical prediction, supported by numerical simulation, that for such systems the (quasi-)equilibrium states can change...... that can be substantial depending on the strength of the HF excitation) for finite values of the damping. The analysis is focused on the differences between the classic results for weakly damped systems, and new effects for which the strong damping terms are responsible. The analysis is based on a slightly...... modified averaging technique, and includes an elementary example of an elliptically excited pendulum for illustration, alongside with a generalization to a broader class of strongly damped dynamical systems with HF excitation. As an application example, the nontrivial behavior of a classical optimally...

  12. A Research Agenda on Assessing and Remediating Home Dampness and Mold to Reduce Dampness-Related Health Effects

    Energy Technology Data Exchange (ETDEWEB)

    Mendell, Mark J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)


    This report briefly summarizes, based on recent review articles and selected more recent research reports, current scientific knowledge on two topics: assessing unhealthy levels of indoor D/M in homes and remediating home dampness-related problems to protect health. Based on a comparison of current scientific knowledge to that required to support effective, evidence-based, health-protective policies on home D/M, gaps in knowledge are highlighted, prior questions and research questions specified, and necessary research activities and approaches recommended.

  13. A Research Agenda on Assessing and Remediating Home Dampness and Mold to Reduce Dampness-Related Health Effects

    Energy Technology Data Exchange (ETDEWEB)

    Mendell, Mark J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Computational Cosmology Center


    This report briefly summarizes, based on recent review articles and selected more recent research reports, current scientific knowledge on two topics: assessing unhealthy levels of indoor D/M in homes and remediating home dampness-related problems to protect health. Based on a comparison of current scientific knowledge to that required to support effective, evidence-based, health-protective policies on home D/M, gaps in knowledge are highlighted, prior questions and research questions specified, and necessary research activities and approaches recommended.

  14. Effects of mass transfer on damping mechanisms of vapor bubbles oscillating in liquids. (United States)

    Zhang, Yuning; Gao, Yuhang; Guo, Zhongyu; Du, Xiaoze


    The damping mechanisms play an important role in the behavior of vapor bubbles. In the present paper, effects of mass transfer on the damping mechanisms of oscillating vapor bubbles in liquids are investigated within a wide range of parameter zone (e.g. in terms of frequency and bubble Péclet number). Results of the vapor bubbles are also compared with those of the gas bubbles. Our findings reveal that the damping mechanisms of vapor bubbles are significantly affected by the mass transfer especially in the regions with small and medium bubble Péclet number. Comparing with the gas bubbles, the contributions of the mass-transfer damping mechanism for the vapor bubble case are quite significant, being the dominant damping mechanism in a wide region. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Investigation of Landau-damping effects on shock formation

    DEFF Research Database (Denmark)

    Andersen, H.K.; D'Angelo, N.; Michelsen, Poul


    Landau damping in plasmas of equal ion and electron temperatures (alkali plasmas) may prevent the formation of a shock. Shocks are produced when the ratio Te/Ti is increased to about 8 or so by cooling the ions through i-n collisions.......Landau damping in plasmas of equal ion and electron temperatures (alkali plasmas) may prevent the formation of a shock. Shocks are produced when the ratio Te/Ti is increased to about 8 or so by cooling the ions through i-n collisions....

  16. The Effect of Global and Local Damping on the Perception of Hardness. (United States)

    van Beek, Femke Elise; Heck, Dennis J F; Nijmeijer, Henk; Bergmann Tiest, Wouter M; Kappers, Astrid M L


    In tele-operation systems, damping is often injected to guarantee system stability during contact with hard objects. In this study, we used psychophysical experiments to assess the effect of adding damping on the user's perception of object hardness. In Experiments 1 and 2, combinations of stiffness and damping were tested to assess their effect on perceived hardness. In both experiments, two tasks were used: an in-contact task, starting at the object's surface, and a contact-transition task, including a free-air movement. In Experiment 3, the difference between inserting damping globally (equally throughout the workspace) and locally (inside the object only) was tested. In all experiments, the correlation between the participant's perceptual decision and force and position data was also investigated. Experiments 1 and 2 show that when injecting damping globally, perceived hardness slightly increased for an in-contact task, while it decreased considerably for a contact-transition task. Experiment 3 shows that this effect was mainly due to inserting damping globally, since there was a large perceptual difference between inserting damping globally and locally. The force and position parameters suggest that participants used the same force profile during the two movements of one trial and assessed the system's reaction to this force to perceive hardness.

  17. Effect of Graphene Oxide on the Damping Capability of Recycled Mortar (United States)

    Wei, Jing-Jie; Long, Wu-Jian; Fang, Chang-Le; Li, Hao-Dao; Guo, Yue-Gui


    The use of recycled aggregate as replacement of natural aggregate has increased in recent years in order to reduce the high consumption of natural resources in construction industry. This paper presents an experimental investigation on the effect of graphene oxide (GO) on the damping capability of recycled mortar. The effect of GO on damping capability was examined by using dynamic mechanical analyzer (DMA), It is showed that the recycled mortar with GO has a better damping capability than the recycled mortar without GO. Microstructural analysis of the recycled mortar with GO showed to have much denser and better crystallization of hydration products.

  18. The forced harmonic oscillator with damping and thermal effects

    International Nuclear Information System (INIS)

    Menezes Franca, H. de; Thomaz, M.T.


    Nonperturbative quantum mechanical solutions of the forced harmonic oscillator with radiation reaction damping are obtained from previous analysis based on Stochastic Electrodynamics. The transition to excited states is shown to be to coherent states which follow the classical trajectory. The quantum Wigner distribution in phase space is constructed. All the results are extended to finite temperatures. (Author) [pt

  19. Effect of loose spring skirt mounting position on vibration damping in a multi segment hanging cantilever

    International Nuclear Information System (INIS)

    Nazeer, M.M.; Khan, A.F.; Shah, R.H; Afzal, M.; Ahmed, N.


    The loose spring skirt clearance is the major factor effecting the damping and amplitude control of randomly excited vibrations in a vertically hanging cantilever. However, the spring's mounting position also has an important role to play. In this work, the results of computational model as well as that of experimental set-up for various spring mounting positions having optimum annular clearance between skirted member and the skirt are presented and their vibration damping response is analyzed. It is observed that lower is the mounting position, the better is the damping and its maximum value is attained when the bottom end of spring skirt and the hanging cantilever are mutually flushed. (author)

  20. Effect of PVRC damping with independent support motion response spectrum analysis of piping systems

    International Nuclear Information System (INIS)

    Wang, Y.K.; Bezler, P.; Shteyngart, S.


    The Technical Committee for Piping Systems of the Pressure Vessel Research Committee (PVRC) has recommended new damping values to be used in the seismic analyses of piping systems in nuclear power plants. To evaluate the effects of coupling these recommendations with the use of independent support motion analyses methods, two sets of seismic analyses have been carried out for several piping systems. One set based on the use of uniform damping as specified in Regulatory Guide 1.61, the other based on the PVRC recommendations. In each set the analyses were performed using independent support motion time history and response spectrum methods as well as the envelope spectrum method. In the independent response spectrum analyses, 14 response estimates were in fact obtained by considering different combination procedures between the support group contributions and all sequences of combinations between support groups, modes and directions. For each analysis set, the response spectrum results were compared with time history estimates of those results. Comparison tables were then prepared depicting the percentage by which the response spectrum estimates exceeded the time history estimates. By comparing the result tables between both analysis sets, the impact of PVRC damping can be observed. Preliminary results show that the degree of exceedance of the response spectrum estimates based on PVRC damping is less than that based on uniform damping for the same piping problem. Expressed differently the results obtained if ISM methods are coupled with PVRC damping are not as conservative as those obtained using uniform damping

  1. Nonlinear effects in the damping of third-sound pulses

    International Nuclear Information System (INIS)

    Browne, D.A.


    We show that nonlinearities in the equations of motion for a third-sound pulse in a thick superfluid film lead to the production of short-wavelength solitons. The soliton damping arises from viscous stresses in the film, rather than from coupling to thermal currents in the vapor and the substrate as in the hydrodynamic regime. These solitons are more strongly damped than a long-wavelength third-sound wave and lead to a larger attenuation of the pulse. We show that this mechanism can account for the discrepancy between attenuation calculated theoretically for the long-wavelength limit and the experimentally observed attenuation of low-amplitude third-sound pulses

  2. Dynamic soil-pile-interaction effects on eigenfrequency and damping of slender structures

    DEFF Research Database (Denmark)

    Zania, Varvara


    of the dynamic soil-pile-interaction on the natural vibration characteristics of the flexibly supported structure. For this purpose a two-step iterative procedure has been developed based on two analytical solutions. The frequency dependent dynamic stiffness and damping coefficients are taken into consideration......-conservative overestimation of the eigenfrequency and underestimation of damping especially for small slenderness ratios and high flexibility factor of the soil – pile system (short, rigid piles). The observed trends become even more prominent as the height of the slender structure increases. The effect of the monopile...... after a rigorous solution of horizontal soil – pile vibration, while the modified SSI eigenperiod and damping are calculated accounting for the cross coupling stiffness and damping terms of the soil – pile system. Disregarding the off diagonal terms is considered inappropriate since it results to non...

  3. Numerical Research of the Viscous Effect of the Bilge Keel on the Damping Moment

    Directory of Open Access Journals (Sweden)

    Deng Rui


    Full Text Available Bilge keels are effective passive devices in mitigating the rolling motion, and the usage of them covers almost all the sea going vessels. This paper focuses on the viscous effect of the bilge keel, ignored the effect of the free surface and the effect of the ship hull, for the general viscous characteristic of the bilge keel. In order to investigate the viscous effect of the bilge keel on the total damping moment, a special 2 dimensional numerical model, which includes a submerged cylinder with and without bilge keels, is designed for the simulation of forced rolling. Three important factors such as bilge keels width, rolling periods, as well as maximal rolling angles are taken into account, and the viscous flow field around the cylinder is simulated by some codes based on the viscous method in different conditions, in which the three factors are coupled. Verification and validation based on the ITTC method are performed for the cylinder without bilge keels in the conditions of different rolling periods and maximal rolling angles. The primary calculation of damping moment induced by the cylinder with 0mm, 4mm, and 10mm width bilge keels shows some interesting results, and a systematic analysis is conducted. The analysis of the damping moment components suggests there is phase difference between the damping moment induced by the cylinder and the bilge keels, and when the bilge keels width reaches a special size, the total damping moment is mitigated. The calculation of the damping moments induced by the cylinder with some larger bilge keels are also performed, and the results suggest that, the damping moment induced by the bilge keels is increased rapidly and becomes the dominant part in the total damping moment while the width of the bilge keels are increased, but the damping moment induced by the cylinder is not changed significantly. Some illustration of the vortices formation and shedding is included, which is the mechanism of the damping

  4. Effect of heat treatment on the microstructures and damping properties of biomedical Mg-Zr alloy

    International Nuclear Information System (INIS)

    Tsai, Ming-Hung; Chen, May-Show; Lin, Ling-Hung; Lin, Ming-Hong; Wu, Ching-Zong; Ou, Keng-Liang; Yu, Chih-Hua


    Research highlights: → When the as-quenched Mg-1Zr alloy was aged at temperatures ranging from 200 deg. C to 500 deg. C, a microstructural transformation sequence was found to be α-Mg → (α-Mg + twin dense ) → (α-Mg + twin loose ) → (α-Mg + α-Zr). → As the as-quenched Mg-1Zr alloy was subjected to aging treatment at 300 deg. C for 16 h, it exhibited the maximum damping properties. → The twin structure plays a crucial role in increasing the damping capacity of the Mg-1Zr alloy. - Abstract: In this study, we elucidated the effect of heat treatment on the microstructures and damping properties of the biomedical Mg-1 wt% Zr (K1) alloy by optical microscopy, transmission electron microscopy, energy-dispersive X-ray spectrometry, and experimental model analysis. The following microstructural transformation occurred when the as-quenched (AQ, i.e., solution heat treated and quenched) K1 alloy was subjected to aging treatment in the temperature range 200-500 deg. C: α-Mg → (α-Mg + twin dense ) → (α-Mg + twin loose ) → (α-Mg + α-Zr). This microstructural transformation was accompanied by variations in the damping capacity. The damping properties of the AQ K1 alloy subjected to aging treatment at 300 deg. C for 16 h were the best among those of the alloys investigated in the present study. The presence of twin structures in the alloy matrix was thought to play a crucial role in increasing the damping capacity of the K1 alloy. Hence, we state that a combination of solution treatment and aging is an effective means of improving the damping capacity of biomedical K1 alloys.

  5. Effect of heat treatment on the microstructures and damping properties of biomedical Mg-Zr alloy

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, Ming-Hung [Department of Mechanical Engineering and Graduate Institute of Mechanical and Precision Engineering, National Kaoshiung University of Applied Sciences, Kaoshiung 807, Taiwan (China); Department of Dentistry, Chang Yin dental clinic, No.46-1, Yangming St., Banqiao City, Taipei County 220, Taiwan (China); Research Center for Biomedical Devices, Taipei Medical University, Taipei 110, Taiwan (China); Chen, May-Show [Research Center for Biomedical Devices, Taipei Medical University, Taipei 110, Taiwan (China); School of Oral Hygiene, College of Oral Medicine, Taipei Medical University, Taipei 110, Taiwan (China); Department of Dentistry, Taipei Medical University Hospital, Taipei 110, Taiwan (China); Lin, Ling-Hung [Department of Dentistry, Taipei Medical University Hospital, Taipei 110, Taiwan (China); School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei 110, Taiwan (China); Lin, Ming-Hong [Department of Mechanical Engineering and Graduate Institute of Mechanical and Precision Engineering, National Kaoshiung University of Applied Sciences, Kaoshiung 807, Taiwan (China); Wu, Ching-Zong, E-mail: [Department of Dentistry, Taipei Medical University Hospital, Taipei 110, Taiwan (China); School of Dentistry, College of Oral Medicine, Taipei Medical University, Taipei 110, Taiwan (China); Ou, Keng-Liang, E-mail: [Research Center for Biomedical Devices, Taipei Medical University, Taipei 110, Taiwan (China); Graduated Institute of Biomedical Materials and Engineering, Taipei Medical University, Taipei 110, Taiwan (China); Research Center for Biomedical Implants and Microsurgery Devices, Taipei Medical University, Taipei 110, Taiwan (China); Yu, Chih-Hua [Research Center for Biomedical Devices, Taipei Medical University, Taipei 110, Taiwan (China); Research Center for Biomedical Implants and Microsurgery Devices, Taipei Medical University, Taipei 110, Taiwan (China)


    Research highlights: > When the as-quenched Mg-1Zr alloy was aged at temperatures ranging from 200 deg. C to 500 deg. C, a microstructural transformation sequence was found to be {alpha}-Mg {yields} ({alpha}-Mg + twin{sub dense}) {yields} ({alpha}-Mg + twin{sub loose}) {yields} ({alpha}-Mg + {alpha}-Zr). > As the as-quenched Mg-1Zr alloy was subjected to aging treatment at 300 deg. C for 16 h, it exhibited the maximum damping properties. > The twin structure plays a crucial role in increasing the damping capacity of the Mg-1Zr alloy. - Abstract: In this study, we elucidated the effect of heat treatment on the microstructures and damping properties of the biomedical Mg-1 wt% Zr (K1) alloy by optical microscopy, transmission electron microscopy, energy-dispersive X-ray spectrometry, and experimental model analysis. The following microstructural transformation occurred when the as-quenched (AQ, i.e., solution heat treated and quenched) K1 alloy was subjected to aging treatment in the temperature range 200-500 deg. C: {alpha}-Mg {yields} ({alpha}-Mg + twin{sub dense}) {yields} ({alpha}-Mg + twin{sub loose}) {yields} ({alpha}-Mg + {alpha}-Zr). This microstructural transformation was accompanied by variations in the damping capacity. The damping properties of the AQ K1 alloy subjected to aging treatment at 300 deg. C for 16 h were the best among those of the alloys investigated in the present study. The presence of twin structures in the alloy matrix was thought to play a crucial role in increasing the damping capacity of the K1 alloy. Hence, we state that a combination of solution treatment and aging is an effective means of improving the damping capacity of biomedical K1 alloys.

  6. Effect of Damping and Yielding on the Seismic Response of 3D Steel Buildings with PMRF

    Directory of Open Access Journals (Sweden)

    Alfredo Reyes-Salazar


    Full Text Available The effect of viscous damping and yielding, on the reduction of the seismic responses of steel buildings modeled as three-dimensional (3D complex multidegree of freedom (MDOF systems, is studied. The reduction produced by damping may be larger or smaller than that of yielding. This reduction can significantly vary from one structural idealization to another and is smaller for global than for local response parameters, which in turn depends on the particular local response parameter. The uncertainty in the estimation is significantly larger for local response parameter and decreases as damping increases. The results show the limitations of the commonly used static equivalent lateral force procedure where local and global response parameters are reduced in the same proportion. It is concluded that estimating the effect of damping and yielding on the seismic response of steel buildings by using simplified models may be a very crude approximation. Moreover, the effect of yielding should be explicitly calculated by using complex 3D MDOF models instead of estimating it in terms of equivalent viscous damping. The findings of this paper are for the particular models used in the study. Much more research is needed to reach more general conclusions.

  7. Landau damping effects on dust-acoustic solitary waves in a dusty negative-ion plasma

    Energy Technology Data Exchange (ETDEWEB)

    Barman, Arnab; Misra, A. P., E-mail:, E-mail: [Department of Mathematics, Siksha Bhavana, Visva-Bharati University, Santiniketan 731 235, West Bengal (India)


    The nonlinear theory of dust-acoustic waves (DAWs) with Landau damping is studied in an unmagnetized dusty negative-ion plasma in the extreme conditions when the free electrons are absent. The cold massive charged dusts are described by fluid equations, whereas the two-species of ions (positive and negative) are described by the kinetic Vlasov equations. A Korteweg-de Vries (KdV) equation with Landau damping, governing the dynamics of weakly nonlinear and weakly dispersive DAWs, is derived following Ott and Sudan [Phys. Fluids 12, 2388 (1969)]. It is shown that for some typical laboratory and space plasmas, the Landau damping (and the nonlinear) effects are more pronounced than the finite Debye length (dispersive) effects for which the KdV soliton theory is not applicable to DAWs in dusty pair-ion plasmas. The properties of the linear phase velocity, solitary wave amplitudes (in presence and absence of the Landau damping) as well as the Landau damping rate are studied with the effects of the positive ion to dust density ratio (μ{sub pd}) as well as the ratios of positive to negative ion temperatures (σ) and masses (m)

  8. On the Effect of Thermoelastic Damping in Nonlinear Micro Electro Mechanical Resonators using Differential Quadrature Method

    Directory of Open Access Journals (Sweden)

    A. Karami Mohammadi


    Full Text Available : In this paper, a nonlinear model of clamped-clamped microbeam actuated by electrostatic load with stretching and thermoelastic effects is presented. Free vibration frequency is calculated by discretization based on DQ method. Frequency is a complex value due to the thermoelastic effect that dissipates the energy. By separating the real and imaginary parts of frequency, quality factor of thermoelastic damping is calculated. Both stretching and thermoelastic effects are validated against the results of the reference papers. The variations of thermoelastic damping versus elasticity modulus, coefficient of thermal expansion and geometrical parameters such as thickness, gap distance, and length are investigated and these results are compared in the linear and nonlinear models for high values of voltage. Also, this paper shows that since for high values of electrostatic voltage the linear model reveals a large error for calculating the thermoelastic damping, the nonlinear model should be used for this purpose.

  9. Effect of oscillation mode on the free-molecule squeeze-film air damping

    KAUST Repository

    Gang Hong,


    A 3D Monte Carlo (MC) simulation approach is developed and employed to study the effect of the oscillation mode on the squeeze-film air damping in the free-molecule regime. By tracking individual gas molecule\\'s motion and its interaction with the resonator, the MC approach is by far the most accurate modeling approach for the modeling of squeeze-film damping in the free-molecule regime. The accuracy of this approach is demonstrated on several cases in which either analytical solutions or experimental measurements are available. It has been found that unlike the case when resonators oscillate in an unbounded domain, squeeze film damping is very sensitive to the mode shape, which implies that some of the existing modeling approaches based on rigid-resonator assumption may not be accurate when applied to model resonators oscillating at their deformed shape. ©2010 IEEE.

  10. Differential effects of organic compounds on cucumber damping-off and biocontrol activity of antagonistic bacteria

    DEFF Research Database (Denmark)

    Li, Bin; Ravnskov, Sabine; Guanlin, X.


    showed that the organic compounds differentially affected both pathogen and BCAs. Tryptic soy broth, glucose and chitosan increased Pythium damping-off of cucumber, compared to the control treatment without organic compounds, whereas cellulose had no effect. Both Paenibacillus species had biocontrol...

  11. Effects of Active Sting Damping on Common Research Model Data Quality (United States)

    Acheson, Michael J.; Balakrishna, S.


    Recent tests using the Common Research Model (CRM) at the Langley National Transonic Facility (NTF) and the Ames 11-foot Transonic Wind Tunnel (11' TWT) produced large sets of data that have been used to examine the effects of active damping on transonic tunnel aerodynamic data quality. In particular, large statistically significant sets of repeat data demonstrate that the active damping system had no apparent effect on drag, lift and pitching moment repeatability during warm testing conditions, while simultaneously enabling aerodynamic data to be obtained post stall. A small set of cryogenic (high Reynolds number) repeat data was obtained at the NTF and again showed a negligible effect on data repeatability. However, due to a degradation of control power in the active damping system cryogenically, the ability to obtain test data post-stall was not achieved during cryogenic testing. Additionally, comparisons of data repeatability between NTF and 11-ft TWT CRM data led to further (warm) testing at the NTF which demonstrated that for a modest increase in data sampling time, a 2-3 factor improvement in drag, and pitching moment repeatability was readily achieved not related with the active damping system.

  12. Hamiltonian and Lagrangian dynamics of charged particles including the effects of radiation damping (United States)

    Qin, Hong; Burby, Joshua; Davidson, Ronald; Fisch, Nathaniel; Chung, Moses


    The effects of radiation damping (radiation reaction) on accelerating charged particles in modern high-intensity accelerators and high-intensity laser beams have becoming increasingly important. Especially for electron accelerators and storage rings, radiation damping is an effective mechanism and technique to achieve high beam luminosity. We develop Hamiltonian and Lagrangian descriptions of the classical dynamics of a charged particle including the effects of radiation damping in the general electromagnetic focusing channels encountered in accelerators. The direct connection between the classical Hamiltonian and Lagrangian theories and the more fundamental QED description of the synchrotron radiation process is also addressed. In addition to their theoretical importance, the classical Hamiltonian and Lagrangian theories of the radiation damping also enable us to numerically integrate the dynamics using advanced structure-preserving geometric algorithms. These theoretical developments can also be applied to runaway electrons and positrons generated during the disruption or startup of tokamak discharges. This research was supported by the U.S. Department of Energy (DE-AC02-09CH11466).

  13. Lubrication pressure and fractional viscous damping effects on the spring-block model of earthquakes (United States)

    Tanekou, G. B.; Fogang, C. F.; Kengne, R.; Pelap, F. B.


    We examine the dynamical behaviours of the "single mass-spring" model for earthquakes considering lubrication pressure effects on pre-existing faults and viscous fractional damping. The lubrication pressure supports a part of the load, thereby reducing the normal stress and the associated friction across the gap. During the co-seismic phase, all of the strain accumulated during the inter-seismic duration does not recover; a fraction of this strain remains as a result of viscous relaxation. Viscous damping friction makes it possible to study rocks at depth possessing visco-elastic behaviours. At increasing depths, rock deformation gradually transitions from brittle to ductile. The fractional derivative is based on the properties of rocks, including information about previous deformation events ( i.e., the so-called memory effect). Increasing the fractional derivative can extend or delay the transition from stick-slip oscillation to a stable equilibrium state and even suppress it. For the single block model, the interactions of the introduced lubrication pressure and viscous damping are found to give rise to oscillation death, which corresponds to aseismic fault behaviour. Our result shows that the earthquake occurrence increases with increases in both the damping coefficient and the lubrication pressure. We have also revealed that the accumulation of large stresses can be controlled via artificial lubrication.

  14. Effects of radiation damping for biomolecular NMR experiments in solution: a hemisphere concept for water suppression. (United States)

    Ishima, Rieko


    Abundant solvent nuclear spins, such as water protons in aqueous solution, cause radiation damping in NMR experiments. It is important to know how the effect of radiation damping appears in high-resolution protein NMR because macromolecular studies always require very high magnetic field strengths with a highly sensitive NMR probe that can easily cause radiation damping. Here, we show the behavior of water magnetization after a pulsed-field gradient (PFG) using nutation experiments at 900 MHz with a cryogenic probe: when water magnetization is located in the upper hemisphere (having +Z component, parallel to the external magnetic field), dephasing of the magnetization by a PFG effectively suppresses residual water magnetization in the transverse plane. In contrast, when magnetization is located in the lower hemisphere (having -Z component), the small residual transverse component remaining after a PFG is still sufficient to induce radiation damping. Based on this observation, we designed 1 H- 15 N HSQC experiments in which water magnetization is maintained in the upper hemisphere, but not necessarily along Z, and compared them with the conventional experiments, in which water magnetization is inverted during the t 1 period. The result demonstrates moderate gain of signal-to-noise ratio, 0-28%. Designing the experiments such that water magnetization is maintained in the upper hemisphere allows shorter pulses to be used compared to the complete water flip-back and, thereby, is useful as a building block of protein NMR pulse programs in solution.

  15. Siglec-G represses DAMP-mediated effects on T cells. (United States)

    Toubai, Tomomi; Rossi, Corinne; Oravecz-Wilson, Katherine; Zajac, Cynthia; Liu, Chen; Braun, Thomas; Fujiwara, Hideaki; Wu, Julia; Sun, Yaping; Brabbs, Stuart; Tamaki, Hiroya; Magenau, John; Zheng, Pang; Liu, Yang; Reddy, Pavan


    The role of negative regulators or suppressors of the damage-associated molecular pattern-mediated (DAMP-mediated) stimulation of innate immune responses is being increasingly appreciated. However, the presence and function of suppressors of DAMP-mediated effects on T cells, and whether they can be targeted to mitigate T cell-dependent immunopathology remain unknown. Sialic acid-binding immunoglobulin-like lectin G (Siglec-G) is a negative regulator of DAMP-mediated responses in innate immune cells, but its T cell-autonomous role is unknown. Utilizing loss-of-function-based (genetic knockout) and gain-of-function-based (agonist) approaches, we demonstrate that in the presence of certain DAMPs, Siglec-G suppressed in vitro and in vivo T cell responses. We also demonstrate that its T cell-autonomous role is critical for modulating the severity of the T cell-mediated immunopathology, graft-versus-host disease (GVHD). Enhancing the Siglec-G signaling in donor T cells with its agonist, a CD24Fc fusion protein, ameliorated GVHD while preserving sufficient graft-versus-tumor (GVT) effects in vivo. Collectively, these data demonstrate that Siglec-G is a potentially novel negative regulator of T cell responses, which can be targeted to mitigate GVHD.

  16. Inhibition of DAMP signaling as an effective adjunctive treatment strategy in pneumococcal meningitis. (United States)

    Masouris, Ilias; Klein, Matthias; Dyckhoff, Susanne; Angele, Barbara; Pfister, H W; Koedel, Uwe


    Pneumococcal meningitis remains a potentially lethal and debilitating disease, mainly due to brain damage from sustained inflammation. The release of danger-associated molecular patterns (DAMPs), like myeloid-related protein 14 (MRP14) and high mobility group box 1 protein (HMGB1), plays a major role in persistence of inflammation. In this study, we evaluated if paquinimod, an MRP14-inhibitor, and an anti-HMGB1 antibody can improve clinical outcome as adjunctive therapeutics in pneumococcal meningitis. We tested the adjuvant administration of paquinimod and the anti-HMGB1 antibody in our pneumococcal meningitis mouse model assessing clinical (clinical score, open-field-test, temperature) and pathophysiological parameters (intracranial pressure, white blood cell count in CSF, bleeding area) as well as bacterial titers in blood and brain 24 h after administration and 48 h after infection. Furthermore, we explored the interactions of these two agents with dexamethasone, the standard adjuvant treatment in pneumococcal meningitis (PM), and daptomycin, a non-bacteriolytic antibiotic preventing pathogen-associated molecular pattern (PAMP) release. Adjunctive inhibition of MRP14 or HMGB1 reduced mortality in mice with PM. This effect was lost when the two anti-DAMP agents were given simultaneously, possibly due to excessive immunosuppression. Combining anti-PAMP (daptomycin) and anti-DAMP treatments did not produce synergistic results; instead, the anti-DAMP treatment alone was sufficient and superior. The combination of anti-HMGB1 with dexamethasone did not diminish the effect of the former. DAMP inhibition possesses good potential as an adjuvant treatment approach in PM, as it improves clinical outcome and can be given together with the standard adjuvant dexamethasone without drug effect loss in experimental PM.

  17. DAMPs Synergize with Cytokines or Fibronectin Fragment on Inducing Chondrolysis but Lose Effect When Acting Alone

    Directory of Open Access Journals (Sweden)

    Lei Ding


    Full Text Available Objective and Design. To investigate whether endogenous damage-associated molecular patterns (DAMPs or alarmins originated from mitochondria or nucleus stimulates inflammatory response in articular chondrocytes to cause chondrolysis which leads to cartilage degradation featured in posttraumatic osteoarthritis (PTOA. Materials. Primary cultures of bovine or human chondrocytes isolated from cartilage of weight-bearing joints. Treatment. Chondrocytes were subjected to mitochondrial DAMPs (MTDs or HMGB1, a nuclear DAMP (NuD, with or without the presence of an N-terminal 29 kDa fibronectin fragment (Fn-f or proinflammatory cytokines (IL-1β and TNF-α. Injured cartilage-conditioned culturing medium containing a mixture of DAMPs was employed as a control. After 24 hrs, the protein expression of cartilage degrading metalloproteinases and iNOS in culture medium or cell lysates was examined with Western blotting, respectively. Results. HMGB1 was synergized with IL-1β in upregulating expression of MMP-3, MMP-13, ADAMTS-5, ADAM-8, and iNOS. Moreover, a moderate synergistic effect was detected between HMGB1 and Fn-f or between MTDs and TNF-α on MMP-3 expression. However, when acting alone, MTDs or HMGB1 did not upregulate cartilage degrading enzymes or iNOS. Conclusion. MTDs or HMGB1 could only stimulate inflammatory response in chondrocytes with the presence of cytokines or Fn-f.

  18. Quadratic Damping (United States)

    Fay, Temple H.


    Quadratic friction involves a discontinuous damping term in equations of motion in order that the frictional force always opposes the direction of the motion. Perhaps for this reason this topic is usually omitted from beginning texts in differential equations and physics. However, quadratic damping is more realistic than viscous damping in many…

  19. Very Oblique Whistler Mode Propagation in the Radiation Belts: Effects of Hot Plasma and Landau Damping (United States)

    Ma, Q.; Artemyev, A. V.; Mourenas, D.; Li, W.; Thorne, R. M.; Kletzing, C. A.; Kurth, W. S.; Hospodarsky, G. B.; Reeves, G. D.; Spence, H. E.; Wygant, J.


    Satellite observations of a significant population of very oblique chorus waves in the outer radiation belt have fueled considerable interest in the effects of these waves on energetic electron scattering and acceleration. However, corresponding diffusion rates are extremely sensitive to the refractive index N, controlled by hot plasma effects including Landau damping and wave dispersion modifications by suprathermal (15-100 eV) electrons. A combined investigation of wave and electron distribution characteristics obtained from the Van Allen Probes shows that peculiarities of the measured electron distribution significantly reduce Landau damping, allowing wave propagation with high N ˜ 100-200. Further comparing measured refractive indexes with theoretical estimates incorporating hot plasma corrections to the wave dispersion, we provide the first experimental demonstration that suprathermal electrons indeed control the upper limit of the refractive index of highly oblique whistler mode waves. Such results further support the importance of incorporating very oblique waves into radiation belt models.

  20. Effect of sputtered flux direction on damping properties in magnetic bilayers (United States)

    Nayak, Sagarika; Mallick, Sougata; Bhusan Singh, Braj; Bedanta, Subhankar


    We deposited Co40Fe40B20 (hard)/Co (soft) bilayers by varying the direction of the substrate relative to the line of impinging flux of sputtered atoms of the constituent layers. We have chosen two orientations in which the angle between the sputter flux for Co40Fe40B20 and Co layers are 0° (parallel-configuration) and 90° (perpendicular-configuration) with respect to each other. Domain imaging and the dynamic magnetic properties have been studied by performing magneto-optic Kerr effect based microscopy and ferromagnetic resonance spectroscopy, respectively. Kerr microscopy revealed that magnetic domains for the bilayers grown in different configurations exhibit a cumulative effect of the domain structure of both the single layers. However, we found that the damping constant α for the bilayers grown in the parallel-configuration exhibit lower damping as compared to the corresponding sample grown under the perpendicular-configuration.

  1. Estimating the Effects of Damping Treatments on the Vibration of Complex Structures (United States)


    with me- chanical vibrations and the temperature profile on the surface is mapped by real-time video thermography . Damage in the structure is...Recent literature[23, 24] in the field of thermography has placed the limit of temperature sensitivity on thermal cameras at 0.025°C. Recent... aircraft and spacecraft structures, in- effective damping leads to unnecessary weight and thus lower allowances for payload and critical systems

  2. An application of eddy current damping effect on single point diamond turning of titanium alloys (United States)

    Yip, W. S.; To, S.


    Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance.

  3. An application of eddy current damping effect on single point diamond turning of titanium alloys

    International Nuclear Information System (INIS)

    Yip, W S; To, S


    Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance. (paper)

  4. Effect of Particle Damping on an Acoustically Excited Curved Vehicle Panel Structure with varied Equipment Assemblies (United States)

    Parsons, David; Smith, Andrew; Knight, Brent; Hunt, Ron; LaVerde, Bruce; Craigmyle, Ben


    Particle dampers provide a mechanism for diverting energy away from resonant structural vibrations. This experimental study provides data from trials to determine how effective use of these dampers might be for equipment mounted to a curved orthogrid vehicle panel. Trends for damping are examined for variations in damper fill level, component mass, and excitation energy. A significant response reduction at the component level would suggest that comparatively small, thoughtfully placed, particle dampers might be advantageously used in vehicle design. The results of this test will be compared with baseline acoustic response tests and other follow-on testing involving a range of isolation and damping methods. Instrumentation consisting of accelerometers, microphones, and still photography data will be collected to correlate with the analytical results.

  5. Effects of ion cyclotron harmonic damping on current drive in the lower hybrid frequency range

    International Nuclear Information System (INIS)

    Wong, K.L.; Ono, M.


    We investigate the ion cyclotron harmonic damping effects on slow and fast waves in the lower hybrid frequency range for tokamak reactor parameters. Inclusion of the higher order terms in the hot plasma dielectric tensor introduces ion cyclotron harmonic damping; these terms also contribute to the real part of the dispersion relation and affect the wave trajectories. However, wave absorption by 15 keV deuterium and tritium ions can be avoided by choosing the slow wave frequency above the lower hybrid frequency and the fast wave frequency below the lower hybrid frequency. But preliminary estimates show that energetic alpha particles tend to absorb both the slow and the fast waves. This absorption may become a serious obstacle for fusion-reactor current drive in the lower hybrid frequency range

  6. Effect of kappa distribution on the damping rate of the obliquely propagating magnetosonic mode (United States)

    Imran, Ali KHAN; G, MURTAZA


    Data from spacecrafts suggest that space plasma has an abundance of suprathermal particles which are controlled by the spectral index κ when modeled on kappa particle velocity distribution. In this paper, considering homogeneous plasma, the effect of integer values of κ on the damping rate of an obliquely propagating magnetosonic (MS) wave is studied. The frequency of the MS wave is assumed to be less than ion cyclotron frequency, i.e., ω \\ll {ω }{{i}}. Under this assumption, the dispersion relation is investigated both numerically and analytically, and it is found that the real frequency of the wave is not a sensitive function of κ, but the imaginary part of the frequency is. It is also shown that for those values of κ where a large number of resonant particles participate in wave-particle interaction, the wave is heavily damped, as expected. The possible application of the results to the solar wind is discussed.

  7. Effects of Damping Plate and Taut Line System on Mooring Stability of Small Wave Energy Converter

    Directory of Open Access Journals (Sweden)

    Zhen Liu


    Full Text Available Ocean wave energy can be used for electricity supply to ocean data acquisition buoys. A heaving buoy wave energy converter is designed and the damping plate and taut line system are used to provide the mooring stability for better operating conditions. The potential flow assumption is employed for wave generation and fluid structure interactions, which are processed by the commercial software AQWA. Effects of damping plate diameter and taut line linking style with clump and seabed weights on reduction of displacements in 6 degrees of freedom are numerically studied under different operating wave conditions. Tensile forces on taut lines of optimized mooring system are tested to satisfy the national code for wire rope utilization.

  8. Nonlinear Dynamics and Chaos of Microcantilever-Based TM-AFMs with Squeeze Film Damping Effects

    Directory of Open Access Journals (Sweden)

    Jie-Yu Chen


    Full Text Available In Atomic force microscope (AFM examination of a vibrating microcantilever, the nonlinear tip-sample interaction would greatly influence the dynamics of the cantilever. In this paper, the nonlinear dynamics and chaos of a tip-sample dynamic system being run in the tapping mode (TM were investigated by considering the effects of hydrodynamic loading and squeeze film damping. The microcantilever was modeled as a spring-mass-damping system and the interaction between the tip and the sample was described by the Lennard-Jones (LJ potential. The fundamental frequency and quality factor were calculated from the transient oscillations of the microcantilever vibrating in air. Numerical simulations were carried out to study the coupled nonlinear dynamic system using the bifurcation diagram, Poincaré maps, largest Lyapunov exponent, phase portraits and time histories. Results indicated the occurrence of periodic and chaotic motions and provided a comprehensive understanding of the hydrodynamic loading of microcantilevers. It was demonstrated that the coupled dynamic system will experience complex nonlinear oscillation as the system parameters change and the effect of squeeze film damping is not negligible on the micro-scale.

  9. Improving the Validity of Squeeze Film Air-Damping Model of MEMS Devices with Border Effect

    Directory of Open Access Journals (Sweden)

    Cheng Bai


    Full Text Available Evaluation of squeezed film air damping is critical in the design and control of dynamic MEMS devices. The published squeezed film air damping models are generally derived from the analytical solutions of Reynolds equation or its other modified forms under the supposition of trivial pressure boundary conditions on the peripheral borders. These treatments ignoring the border effect can not give faithful result for structure with smaller air venting gap or the double-gimbaled structure in which the inner frame and outer one affect the air venting. In this paper, we use Green’s function to solve the nonlinear Reynolds equation with inhomogeneous boundary conditions. For two typical normal motion cases of parallel plate, the analytical models of squeeze film damping force with border effect are established. The viscous and inertial losses with real values and image values acoustic impedance are all included in the model. These models reduced the time consumption while giving satisfactory result. Without multifield coupling analysis, the estimation of the dynamic behavior of MEMS device is also allowed, and the simulation of the system performance is more convenient.

  10. The Effect of Infinitesimal Damping on the Dynamic Instability Mechanism of Conservative Systems

    Directory of Open Access Journals (Sweden)

    Dimitris S. Sophianopoulos


    Full Text Available The local instability of 2 degrees of freedom (DOF weakly damped systems is thoroughly discussed using the Liénard-Chipart stability criterion. The individual and coupling effect of mass and stiffness distribution on the dynamic asymptotic stability due to mainly infinitesimal damping is examined. These systems may be as follows: (a unloaded (free motion and (b subjected to a suddenly applied load of constant magnitude and direction with infinite duration (forced motion. The aforementioned parameters combined with the algebraic structure of the damping matrix (being either positive semidefinite or indefinite may have under certain conditions a tremendous effect on the Jacobian eigenvalues and then on the local stability of these autonomous systems. It was found that such systems when unloaded may exhibit periodic motions or a divergent motion, while when subjected to the above step load may experience either a degenerate Hopf bifurcation or periodic attractors due to a generic Hopf bifurcation. Conditions for the existence of purely imaginary eigenvalues leading to global asymptotic stability are fully assessed. The validity of the theoretical findings presented herein is verified via a nonlinear dynamic analysis.

  11. The damped wave equation with unbounded damping

    Czech Academy of Sciences Publication Activity Database

    Freitas, P.; Siegl, Petr; Tretter, C.


    Roč. 264, č. 12 (2018), s. 7023-7054 ISSN 0022-0396 Institutional support: RVO:61389005 Keywords : damped wave equation * unbounded damping * essential spectrum * quadratic operator funciton with unbounded coefficients * Schrodinger operators with complex potentials Subject RIV: BE - Theoretical Physics OBOR OECD: Atomic, molecular and chemical physics (physics of atoms and molecules including collision, interaction with radiation, magnetic resonances, Mössbauer effect) Impact factor: 1.988, year: 2016

  12. Comment on “Effects of damping solitary wave in a viscosity bounded plasma” [Phys. Plasmas 21, 022118 (2014)

    Energy Technology Data Exchange (ETDEWEB)

    Ghosh, Uday Narayan, E-mail:; Chatterjee, Prasanta; Roychoudhury, Rajkumar [Department of Mathematics, Siksha Bhavana, Visva Bharati, Santiniketan 731235 (India)


    Recently Gun Li et al. discussed “Effects of damping solitary wave in a viscosity bounded plasma” [Phys. Plasmas 21, 022118 (2014)]. The paper contains some serious errors which have been pointed out in this Comment.


    Directory of Open Access Journals (Sweden)

    Wu Fangwen


    Full Text Available The main beam of a cable-stayed bridge with a floating system may have a larger longitudinal displacement subject to earthquake effect. Thus, seismic control and isolation are crucial to bridge safety. This paper takes Huai’an Bridge, which has elastic coupling devices and viscous dampers set at the joint of the tower and the beam, as the research background. Its finite element model is established, and the elastic stiffness of elastic coupling devices and damper parameters are analyzed. Viscous damper and elastic coupling devices are simulated using Maxwell model and spring elements, and their damping effects are analyzed and compared through structural dynamic time-history analysis. Results show that viscous damper and elastic coupling device furnished at the joint of tower and beam of a cable-stayed bridge tower beam can effectively reduce the longitudinal displacement of the key part of the construction subject to earthquake effect, perfect the internal force distribution, and improve the aseismic performance. Between the two, viscous damper has better damping effects.

  14. Effects of radiation damping on photorecombination of C4 + ions for the KLL resonance (United States)

    Li, Chuan-Ying; Wu, Yong; Qu, Yi-Zhi; Wang, Jian-Guo


    A numerical method based on Zabaydullin and Dubau's work [O. Zabaydullin and J. Dubau, J. Phys. B: At. Mol. Opt. Phys. 45, 115002 (2012), 10.1088/0953-4075/45/11/115002] has been developed to calculate the Cauchy principal value integral in scattering matrices and obtain photorecombination (PR) cross sections of low-lying resonances according to Davies and Seaton's theory [J. Phys. B 2, 757 (1969), 10.1088/0022-3700/2/7/304], in which radiation damping is included. The Dirac R -matrix method is employed to secure the dipole matrix. Using this method, PR cross sections of C4 + for the KLL resonance are acquired, and compared with available experimental measurements and other close-coupling theoretical results. It is shown that our damped cross sections reproduce the experimental data and are in agreement with other theoretical results. Meanwhile, radiation damping can reduce the PR cross section for the 1 s 2 p22P resonance (corresponding to two levels [(1s2p1 /2) 12 p3 /2] 1 /2 and [1s (2p3/22)2] 3 /2 by three orders of magnitude. The unresolved and underestimated resonances 1 s 2 p24P , 1 s 2 s 2 p 4P , and 1 s 2 p22P in the undamped Breit-Pauli R -matrix calculations [H. L. Zhang et al., J. Phys. B: At. Mol. Opt. Phys. 32, 1459 (1999), 10.1088/0953-4075/32/6/010] are corrected. Besides, dielectronic recombination cross sections of C4 + for the KLL resonance are also presented for comparison using the relativistic configuration-interaction (RCI) method implemented in flexible atomic code (fac), which show radiation damping has pronounced influences on 1 s 2 p22P due to much larger radiative rates compared with autoionization rates. Furthermore, radiative and autoionization rates for the intermediate states [(1s2p1 /2) 12 p3 /2] 1 /2 and [1s (2p3/22)2] 3 /2 of the He-like ions with 6 ≤Z ≤83 are calculated using fac, scaling laws of which are checked. Autoionization rates comply with the Zeff0 scaling law for Z ≥32 , which is caused by relativistic effects.

  15. Evaluation of spreading and effectiveness of injection products against rising damp in mortar damp in mortar/brick combinations. Youth in conservation of cultural heritage, YOCOCU 2012

    NARCIS (Netherlands)

    Hacquebord, A.; Lubelli, B.A.; Hees, R.P.J. van; Nijland, T.G.


    Rising damp is one of the most recurrent and well-known hazards to existing buildings and monuments. Several types of intervention exist to tackle the problem. Among these, the creation of a damp-proof course against capillary rise by means of injection of chemical products is one of the most

  16. Damping zone in the biological reserve serra dos toledos (Itajubá-MG and its effect on soil quality

    Directory of Open Access Journals (Sweden)

    Olivia de Lima; Rogério Melloni


    Full Text Available Areas that comprise "damping zones" are important in minimizing the effects of impacts on the environment as they can affect the conservation unit, and in helping to maintain its natural resources. However, they are not protected and many are handled improperly, compromising the sustainability of the conservation units they should protect. The aim of this study was to evaluate the effect of human disturbance in the damping zone on the soil quality inside the Biological Reserve Serra dos Toledos, Itajubá-MG. For this, there were selected three areas under different activities in the damping zone (pasture, agriculture, and native forest and three areas sided to those, within the Reserve. They were characterized according to various physical, chemical, microbiological, and visual soil quality procedures. Areas that had the worst physical, visual, and microbiological conditions were those located in the damping zone under agriculture and pasture. The microbiological attributes were sensitive to the different areas, due to the direct relation between negative impact of agriculture practiced in the damping zone and the soil quality within the Biological Reserve studied.

  17. Effectiveness of elastic damping in the pivot joints of cargo boom of crane-manipulating installations at large gaps

    Directory of Open Access Journals (Sweden)

    Lagerev I.A.


    Full Text Available The article was the analysis of dynamic processes in the cylindrical hinges with large gaps in the cargo boom crane-manipulating installations of mobile machines in operation. Consider the design of damping device for articulated joints, which creates a braking force of elastic resistance to the displacement of the hinge pin within the large gap. The mechanism of action of the damping devices was considered. Analysis of the effectiveness of damping device for re-ducing the dynamic stress state in the elements of cargo boom metal structures depending on the gap size and the stiff-ness of the damping device was performed. Damping device with an elastic shock absorbing elements substantially reduces the additional impact load at the time of selection of the gap in the joint, slow the growth of clearance in the pivot joint, limit the size of the gap specified value, which must not be exceeded during the entire service life of swivel independently from the intensity of his load.

  18. Effectiveness of damped braces to mitigate seismic torsional response of unsymmetric-plan buildings (United States)

    Mazza, Fabio; Pedace, Emilia; Favero, Francesco Del


    The seismic retrofitting of unsymmetric-plan reinforced concrete (r.c.) framed buildings can be carried out by the incorporation of damped braces (DBs). Yet most of the proposals to mitigate the seismic response of asymmetric framed buildings by DBs rest on the hypothesis of elastic (linear) structural response. The aim of the present work is to evaluate the effectiveness and reliability of a Displacement-Based Design procedure of hysteretic damped braces (HYDBs) based on the nonlinear behavior of the frame members, which adopts the extended N2 method considered by Eurocode 8 to evaluate the higher mode torsional effects. The Town Hall of Spilinga (Italy), a framed structure with an L-shaped plan built at the beginning of the 1960s, is supposed to be retrofitted with HYDBs to attain performance levels imposed by the Italian seismic code (NTC08) in a high-risk zone. Ten structural solutions are compared by considering two in-plan distributions of the HYDBs, to eliminate (elastic) torsional effects, and different design values of the frame ductility combined with a constant design value of the damper ductility. A computer code for the nonlinear dynamic analysis of r.c. spatial framed structures is adopted to evaluate the critical incident angle of bidirectional earthquakes. Beams and columns are simulated with a lumped plasticity model, including flat surface modeling of the axial load-biaxial bending moment elastic domain at the end sections, while a bilinear law is used to idealize the behavior of the HYDBs. Damage index domains are adopted to estimate the directions of least seismic capacity, considering artificial earthquakes whose response spectra match those adopted by NTC08 at serviceability and ultimate limit states.

  19. Effect of T6 heat treatment on damping characteristics of Al/RHA ...

    Indian Academy of Sciences (India)

    tural materials that exhibit high damping capacities are desirable for mechanical vibration suppression and acoustic noise attenuation. Mechanical vibrations often affect proper functioning ... low testing temperatures, and to dislocation damping and interface .... supply, amplifiers and the heart of the system, a 32-bit real-time ...

  20. Modeling, design, and testing of a proof-of-concept prototype damper with friction and eddy current damping effects (United States)

    Amjadian, Mohsen; Agrawal, Anil K.


    Friction is considered as one of the most reliable mechanisms of energy dissipation that has been utilized extensively in passive damping devices to mitigate vibration of civil engineering structures subjected to extreme natural hazards such as earthquakes and windstorms. However, passive friction dampers are well-known for having a highly nonlinear hysteretic behavior caused by stick-slip motion at low velocities, a phenomenon that is inherent in friction and increases the acceleration response of the structure under control unfavorably. The authors have recently proposed the theoretical concept of a new type of damping device termed as "Passive Electromagnetic Eddy Current Friction Damper" (PEMECFD) in which an eddy current damping mechanism was utilized not only to decrease the undesirable effects of stick-slip motion, but also to increase the energy dissipation capacity of the damping device as a whole. That study was focused on demonstration of the theoretical performance of the proposed damping device through numerical simulations. This paper further investigates the influence of eddy current damping on energy dissipation due to friction through modeling, design, and testing of a proof-of-concept prototype damper. The design of this damper has been improved over the design in the previous study. The normal force in this damper is produced by the repulsive magnetic force between two cuboidal permanent magnets (PMs) magnetized in the direction normal to the direction of the motion. The eddy current damping force is generated because of the motion of the two PMs and two additional PMs relative to a copper plate in their vicinity. The dynamic models for the force-displacement relationship of the prototype damper are based on LuGre friction model, electromagnetic theory, and inertial effects of the prototype damper. The parameters of the dynamic models have been identified through a series of characterization tests on the prototype damper under harmonic

  1. Adverse health effects among adults exposed to home dampness and molds. (United States)

    Dales, R E; Burnett, R; Zwanenburg, H


    To investigate the association between home dampness and mold and health, questionnaires were administered through the primary school system to parents of school-aged children in six regions of Canada. The present report focuses on the symptoms of the 14,799 adults at least 21 yr of age. The overall response rate was 83%, and missing values for individual variables ranged from 3 to 8%. The presence of home dampness and/or molds (that is, damp spots, visible mold or mildew, water damage, and flooding) was reported by 38% of respondents. The prevalence of lower respiratory symptoms (any cough, phlegm, wheeze, or wheeze with dyspnea) was increased among those reporting dampness or mold compared with those not reporting dampness or mold as follows: 38 versus 27% among current smokers, 21 versus 14% among exsmokers, and 19 versus 11% among nonsmokers (all p values less than 0.001). This association persisted after adjusting for several sociodemographic variables (including age, sex, and region) and several other exposure variables (including active and passive cigarette smoke, natural gas heating, and wood stoves). The odds ratio between symptoms and dampness was 1.62 (95% confidence interval, 1.48 to 1.78) in the final model chosen. This association persisted despite stratification by the presence of allergies or asthma. Exposure to home dampness and mold may be a risk factor for respiratory disease in the Canadian population.

  2. Effect of substitutional defects on Kambersky damping in L1{sub 0} magnetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Qu, T. [School of Physics and Astronomy, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Victora, R. H., E-mail: [School of Physics and Astronomy, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States)


    Kambersky damping, representing the loss of magnetic energy from the electrons to the lattice through the spin orbit interaction, is calculated for L1{sub 0} FePt, FePd, CoPt, and CoPd alloys versus chemical degree of order. When more substitutional defects exist in the alloys, damping is predicted to increase due to the increase of the spin-flip channels allowed by the broken symmetry. It is demonstrated that this corresponds to an enhanced density of states (DOS) at the Fermi level, owing to the rounding of the DOS with loss of long-range order. Both the damping and the DOS of the Co-based alloy are found to be less affected by the disorder. Pd-based alloys are predicted to have lower damping than Pt-based alloys, making them more suitable for high density spintronic applications.

  3. Effect of Temperature and Electric Field on the Damping and Stiffness Characteristics of ER Fluid Short Squeeze Film Dampers

    Directory of Open Access Journals (Sweden)

    H. P. Jagadish


    Full Text Available Squeeze film dampers are novel rotor dynamic devices used to alleviate small amplitude, large force vibrations and are used in conjunction with antifriction bearings in aircraft jet engine bearings to provide external damping as these possess very little inherent damping. Electrorheological (ER fluids are controllable fluids in which the rheological properties of the fluid, particularly viscosity, can be controlled in accordance with the requirements of the rotor dynamic system by controlling the intensity of the applied electric field and this property can be utilized in squeeze film dampers, to provide variable stiffness and damping at a particular excitation frequency. The paper investigates the effect of temperature and electric field on the apparent viscosity and dynamic (stiffness and damping characteristics of ER fluid (suspension of diatomite in transformer oil using the available literature. These characteristics increase with the field as the viscosity increases with the field. However, these characteristics decrease with increase in temperature and shear strain rate as the viscosity of the fluid decreases with temperature and shear strain rate. The temperature is an important parameter as the aircraft jet engine rotors are located in a zone of high temperature gradients and the damper fluid is susceptible to large variations in temperature.

  4. [Effects of Pogostemon cablin on gastrointestinal function of rats with syndrome of damp retention in middle-jiao]. (United States)

    Xu, Wen; Wang, Nan; Ding, Hao-Ran; Xu, Jing-Jing; Qu, Yi-Hui; Pu, Dan; Xiu, Yan-Feng


    To investigate the effects of Pogostemon cablin(patchouli) on gastrointestinal function of rats with the syndrome of damp retention in middle-jiao, and explore its therapeutic mechanism. In this study, gastrointestinal function of rats with the syndrome of damp retention in middle-jiao was evaluated by multiple assays including gastric remnant rate, small intestine propelling rate, gastric juice quantity, pepsin activity and gastrointestinal tissue morphology. ELISA was used to detect gastrointestinal hormones including MTL, GAS, VIP and cytokines including TNF-α and interleukin 10 in rat serum. Real-time fluorescent quantitative PCR technique was used to detect relative mRNA expression of AQP3, AQP4 and AQP8 in gastric and colonic tissues to explore the mechanism of P. cablin in treatment of gastrointestinal functions. The results showed that middle and high dose of P. cablin (3.24, 6.48 g•kg⁻¹) could obviously decrease the gastric remnant rate, promote gastric emptying, increase the small intestine propelling rate(Pdamp retention in middle-jiao. The results of the study laid a foundation for clarifying the treatment mechanism of aromatic damp-resolving drugs for indications including damp retention in middle-jiao and transformation failure of spleen. Copyright© by the Chinese Pharmaceutical Association.

  5. High Frequency Effects of Impedances and Coatings in the CLIC Damping Rings

    CERN Document Server

    Koukovini Platia, Eirini; Rumolo, G

    The Compact Linear Collider (CLIC) is a 3 TeV eÅe¡ machine, currently under design at CERN, that targets to explore the terascale particle physics regime. The experiment requires a high luminosity of 2£1034 cm2 s¡1, which can be achieved with ultra low emittances delivered from the Damping Rings (DRs) complex. The high bunch brightness of the DRs gives rise to several collective effects that can limit the machine performance. Impedance studies during the design stage of the DR are of great importance to ensure safe operation under nominal parameters. As a first step, the transverse impedance model of the DRis built, accounting for the wholemachine. Beam dynamics simulations are performedwith HEADTAIL to investigate the effect on beam dynamics. For the correct impedancemodeling of the machine elements, knowledge of the material properties is essential up to hundreds of GHz, where the bunch spectrum extends. Specifically, Non Evaporable Getter (NEG) is a commonly used coating for good vacuumbut its properti...

  6. Effect of Stress Amplitude on the Damping of Recycled Aggregate Concrete. (United States)

    Liang, Chaofeng; Liu, Tiejun; Xiao, Jianzhuang; Zou, Dujian; Yang, Qiuwei


    Damping characterizes the energy dissipation capacity of materials and structures, and it is affected by several external factors such as vibrating frequency, stress history, temperature, and stress amplitude. This study investigates the relationship between the damping and the stress amplitude of environment-friendly recycled aggregate concrete (RAC). First, a function model of a member's loss factor and stress amplitude was derived based on Lazan's damping-stress function. Then, the influence of stress amplitude on the loss tangent of RAC was experimentally investigated. Finally, parameters used to determine the newly derived function were obtained by numerical fitting. It is shown that the member's loss factor is affected not only by the stress amplitude but also by factors such as the cross section shapes, boundary conditions, load types, and loading positions. The loss tangent of RAC increases with the stress amplitude, even at low stress amplitude. The damping energy exponent of RAC is not identically equal to 2.0, indicating that the damping is nonlinear. It is also found that the energy dissipation capacity of RAC is superior to that of natural aggregate concrete (NAC), and the energy dissipation capacity can be further improved by adding modified admixtures.

  7. Nonlinear effects of a beam interacting with a single damped wave

    International Nuclear Information System (INIS)

    Stoltz, Peter H.; Cary, John R.


    A self-consistent nonlinear theory of the longitudinal dynamics of a low density beam interacting with a single damped wave is developed. In this paper, the model is applied to the coasting beam-cavity system of accelerator physics, but it also applies to beam-plasma systems and traveling wave tubes. Motivating the theory are numerical simulations showing different beam behaviors in the nonlinear regime depending on the amount of wave damping. For highly damped systems, breakoff and energy loss of a self-formed bunch from the beam is observed. This bunch breakoff and energy loss is the cause of the overshoot phenomenon of accelerator physics; furthermore this overshoot does not contradict the Keil-Schnell criterion, as the beam is far from a Gaussian distribution. An expression for the amount of cavity damping necessary for bunch breakoff is derived. Finally, using a single-particle model, an expression for the rate of energy loss of the bunch in terms of the cavity damping is derived. (c) 2000 American Institute of Physics

  8. Simulations of the effects of a superconducting damping wiggler on a short bunched electron beam at ANKA

    Energy Technology Data Exchange (ETDEWEB)

    Gethmann, Julian; Bernhard, Axel; Blomley, Edmund; Hillenbrand, Steffen; Mueller, Anke-Susanne; Smale, Nigel [Karlsruher Institut fuer Technologie (KIT) (Germany); Zolotarev, Konstantin [Budker Institute of Nuclear Physics (Russian Federation)


    (As a part of the CLIC collaboration) A CLIC damping wiggler prototype has been installed at the ANKA synchrotron light source in order to validate the technical design of the 3 T superconducting conduction cooled wiggler and its cryostat and to cary out studies on beam dynamical aspects including collective effects. The latter one will be the main focus in this talk. Collective effects that will occur in damping rings are an issue in ANKA's short bunch operation as well. To simulate these effects the accelerator's model including its insertion device has to be very accurate. Such a model of the ANKA storage ring in short bunch operation mode has been developed in elegant. Simulations with the damping wiggler switched on and off have been performed in order to investigate effects of the wiggler on different machine parameters. These new results will be discussed with regard to the question if on the one hand the wiggler could be used for diagnostic purposes and if on the other hand the wiggler's impact on the beam dynamics is changed by the collective effects.

  9. Landau damping

    CERN Document Server

    Hofmann, A


    Abstract Landau damping is the suppression of an instability by a spread of frequencies in the beam. It is treated here from an experimental point of view. To introduce the concept we consider a set of oscillators having a spread in resonant frequencies !r and calculate the response of their there center-of-mass to an external driving force. A pulse excitation gives each oscillator the same initial velocity but, due to their different frequencies, the center-of-mass motion will decay with time. A harmonic excitation with a frequency ! being inside the distribution in !r results in oscillators responding with different phases and only a few of them having !r ! will grow to large amplitudes and absorb energy. The oscillator response to a pulse excitation, called Green function, and the one to a harmonic excitation, called transfer function, serve as a basis to calculate Landau damping which suppresses an instability at infinitesimal level before any large amplitudes are reached. This is illustrated by a negativ...

  10. Stabilizing and destabilizing effects of damping in non-conservative systems: Some new results (United States)

    Abdullatif, Mahmoud; Mukherjee, Ranjan; Hellum, Aren


    Previous work has amply demonstrated that non-conservative systems can be made unstable by the application of damping. Systems with two neutrally-stable damping levels, whereby the system initially gains stability but later loses stability as the level of damping is increased, have also been observed. The phenomenon of three damping-induced stability transitions has not been reported in the literature. Here we show that the addition of damping can cause non-conservative systems to become stable, then unstable, then stable again at the same value of the non-conservative forcing variable. This combination of stability transitions is found to exist for several example systems, including linkages with follower end forces and fluid-conveying pipes. Another interesting observation is that a given system can exhibit different forms of stability transitions in different regions of its parameter space. In a particular example, the neutral stability curves corresponding to two different modes are observed to intersect, such that the boundary separating the stable and unstable regions is piecewise continuous. This observation requires that the accepted definitions of "stabilizing" and "destabilizing" roles of damping be revised. All of these stability transition behaviors were found by applying the Routh-Hurwitz procedure, whereby the traditional procedure is first applied to the characteristic polynomial of the system, and then again to guarantee the existence of a second-order auxiliary polynomial in the Routh array. This procedure is developed in the context of examples, each of which concerns a classical apparatus who dynamics are more interesting than previously believed.

  11. Magneto-mechanical damping and ΔE-effect in ferritic steel at different levels of ultrasound strain amplitudes

    International Nuclear Information System (INIS)

    Kardashev, B.K.


    Full text: Magneto-mechanical damping and Young modulus (ΔE-effect) of reactor pressure vessel steels were investigated in a wide amplitude range for both amplitude-independent (AID) and amplitude-dependent (ADD) damping ranges. Two types of Japanese Reference Quality (JRQ) steel samples in as received and thermally aged states were used in the experiments. The measurements were made, using the composite oscillator technique at resonance frequencies of about 100 kHz. Longitudinal vibrations of the rod samples were used. Magnetic field up to 2600 A/m was applied along the length of the rod. Amplitude, time and field dependencies of the damping and resonant frequencies (Young modulus) have been measured. Computer controlled acoustic measurements were made simultaneously at two amplitude levels. The data about the influence of high amplitude ultrasonic excitation (HAUE) of the samples (with the amplitudes in the ADD range) on hysteretic field behaviour of AID, ADD and resonant frequencies (ΔE-effects) were obtained. The experiments showed that ΔE-effect at low amplitudes (AID range) was qualitatively changed by HAUE, whereas AID was almost the same during the experiments with and without HAUE. It was found that annealing of the JRQ steel for three years at 290 degree C slightly increased magneto-mechanical damping and ΔE-effect for both AID and ADD ranges, but it did not change qualitatively neither amplitude nor magnetic field dependencies. The analysis of the experimental data shows that the influence of annealing can be explained by relaxation of internal stresses in the sample material. This confirms by higher level of flow stresses for 'as received' sample as compared with the stresses for 'thermally aged' one. The newly found effect of HAUE is supposed to be caused by reversible changes (due to high vibrational amplitude) of the internal stresses as well. (author)

  12. The effectiveness of front fork systems at damping accelerations during isolated aspects specific to cross-country mountain biking. (United States)

    Macdermid, Paul W; Miller, Matthew C; Fink, Philip W; Stannard, Stephen R


    Cross-country mountain bike suspension reportedly enhances comfort and performance through reduced vibration and impact exposure. This study analysed the effectiveness of three different front fork systems at damping accelerations during the crossing of three isolated obstacles (stairs, drop, and root). One participant completed three trials on six separate occasions in a randomised order using rigid, air-sprung, and carbon leaf-sprung forks. Performance was determined by time to cross obstacles, while triaxial accelerometers quantified impact exposure and damping response. Results identified significant main effect of fork type for performance time (p aspects of cross-country terrain features which may be influenced to a larger extent by rider technique.

  13. The effect of inertia, viscous damping, temperature and normal stress on chaotic behaviour of the rate and state friction model (United States)

    Sinha, Nitish; Singh, Arun K.; Singh, Trilok N.


    A fundamental understanding of frictional sliding at rock surfaces is of practical importance for nucleation and propagation of earthquakes and rock slope stability. We investigate numerically the effect of different physical parameters such as inertia, viscous damping, temperature and normal stress on the chaotic behaviour of the two state variables rate and state friction (2sRSF) model. In general, a slight variation in any of inertia, viscous damping, temperature and effective normal stress reduces the chaotic behaviour of the sliding system. However, the present study has shown the appearance of chaos for the specific values of normal stress before it disappears again as the normal stress varies further. It is also observed that magnitude of system stiffness at which chaotic motion occurs, is less than the corresponding value of critical stiffness determined by using the linear stability analysis. These results explain the practical observation why chaotic nucleation of an earthquake is a rare phenomenon as reported in literature.

  14. Effects of extreme wind shear on aeroelastic modal damping of wind turbines

    DEFF Research Database (Denmark)

    Skjoldan, P.F.; Hansen, Morten Hartvig


    Wind shear is an important contributor to fatigue loads on wind turbines. Because it causes an azimuthal variation in angle of attack, it can also affect aerodynamic damping. In this paper, a linearized model of a wind turbine, based on the nonlinear aeroelastic code BHawC, is used to investigate...

  15. Study on optimum aseismic design of complex structure system focusing on damping effect

    International Nuclear Information System (INIS)

    Takahashi, Yoshitaka; Suzuki, Kohei


    Optimum design technique for the purpose of aseismic design of complex plant structures such as piping and boiler structures is proposed. Particular attention is focused on the evaluation of the optimum damping and stiffness of the structures and components. Pseudo least square algorithm is introduced to determine the optimum design parameters. Under the requirement of certain allowable maximum response to a given earthquake excitation, optimum stiffness and damping values of the structure can be simultaneously calculated by this proposed method. The applicability of the method is demonstrated through three structural models; (1) linear multi-storied building model in which stiffness and damping constant of each floor are optimized; (2) nonlinear multi-storied building model having the isolated floor in which hysteretic energy absorber of the isolator is optimized; (3) combined boiler-supporting structure model connected by the inelastic seismic ties with each other is optimized. In this model, optimum values of damping characteristic of the seismic ties are evaluated. This work is particularly important for the aseismic design of complex plant structures like integrated boiler-supporting structure in thermal power plant and piping-containment vessel structure in nuclear power plant

  16. Effect of T6 heat treatment on damping characteristics of Al/RHA ...

    Indian Academy of Sciences (India)

    tural materials that exhibit high damping capacities are desirable for mechanical vibration suppression and acoustic noise attenuation. Mechanical vibrations .... ish white. The silica-rich ash, thus obtained, was used as a reinforcement material in the preparation of composites. The chemical composition of RHA after the ...

  17. Effect of Ca addition on the damping capacity of Mg-Al-Zn casting alloys (United States)

    Jun, Joong-Hwan; Moon, Jung-Hyun


    The influences of Ca addition on the microstructures and damping capacities of AZ91-(0˜2)%Ca casting alloys were investigated, on the basis of the results of X-ray diffractometry, optical microscopy, scanning electron microscopy and vibration tests in a single cantilever mode. The amount of intermetallic compounds decreased with increasing Ca content up to 0.5%, above which it increased; the average cell size showed the opposite tendency. All alloys exhibited similar damping levels in the strain-amplitude independent region. Considering the very low solubility of Ca in the matrix, and that most of the Ca elements are consumed by the formation of the Al2Ca phase and incorporation into the Mg17Al12 phase, this would be ascribed to the almost identical concentrations of Ca solutes distributed in the matrix. In the strain-amplitude dependent region, however, the AZ91-0.5%Ca alloy possessed the maximum damping capacity. From the viewpoint of microstructural evolution with Ca addition, the number density of compound particles is considered to be the principal factor affecting the damping behavior in the strain-amplitude dependent region.

  18. Effects of counterion valency on the damping of phonons propagating along the axial direction of liquid-crystalline DNA (United States)

    Liu, Yun; Chen, Sow-Hsin; Berti, Debora; Baglioni, Piero; Alatas, Ahmet; Sinn, Harald; Alp, Ercan; Said, Ayman


    The phonon propagation and damping along the axial direction of films of aligned 40wt% calf-thymus DNA rods are studied by inelastic x-ray scattering (IXS). The IXS spectra are analyzed with the generalized three effective eigenmode theory, from which we extract the dynamic structure factor S (Q,E) as a function of transferred energy E =ℏω, and the magnitude of the transferred wave vector Q. S (Q,E) of a DNA sample typically consists of three peaks, one central Rayleigh scattering peak, and two symmetric Stokes and anti-Stokes Brillouin side peaks. By analyzing the Brillouin peaks, the phonon excitation energy and damping can be extracted at different Q values from about 4 to 30nm-1. A high-frequency sound speed is obtained from the initial slope of the linear portion of the dispersion relation below Q =4nm-1. The high-frequency sound speed obtained in this Q range is 3100m /s, which is about twice faster than the ultrasound speed of 1800m/s, measured by Brillouin light scattering at Q ˜0.01nm-1 at the similar hydration level. Our observations provide further evidence of the strong coupling between the internal dynamics of a DNA molecule and the dynamics of the solvent. The effect on damping and propagation of phonons along the axial direction of DNA rods due to divalent and trivalent counterions has been studied. It is found that the added multivalent counterions introduce stronger phonon damping. The phonons at the range between ˜12.5 and ˜22.5nm-1 are overdamped by the added counterions according to our model analyses. The intermediate scattering function is extracted and it shows a clear two-step relaxation with the fast relaxation time ranging from 0.1 to 4ps.

  19. Study of the damping effect of human blood plasma by the after effect of optical irradiation on erythrocytes (United States)

    Baranova, L. N.; Kholmogorov, V. E.


    A yield of hemoglobin and different proteins from erythrocytes in physiological solution was registered by spectrophotometer Specord UV-VIS. This yield was noted after development of dark reactions upon single irradiation of erythrocytes by total light of the mercury lamp DRT-375. It was found that this effect took place in the presence of intact plasma at physiological solution (containing as much as 98% of plasma) too. However the higher percentage of plasma solution presented, the greater doses of irradiation was necessary for demonstration of a yield of different substances from erythrocytes. It was observed definite dependence of this dose versus percentage of plasma. It was indicated that the degree of the damping effect of plasma had time dependence from season, i.e. from a structural composition of plasma.

  20. On the Effect of Subsonic Trailing Edges on Damping in Roll and Pitch of Thin Sweptback Wings in a Supersonic Stream

    National Research Council Canada - National Science Library

    Ribner, Herbert


    The principal effect of subsonic trailing edges on the damping in roll and pitch of thin sweptback wings in a supersonic stream is evaluated with the aid of some conical and quasi-conical flows previously derived...

  1. Radiation damping on cryoprobes (United States)

    Shishmarev, Dmitry; Otting, Gottfried


    Radiation damping on 600 and 800 MHz cryoprobes was investigated. The phase angle β between a vector 90° phase shifted to the precessing magnetization and the rf field induced in the coil was found to depend markedly on whether an FID was being acquired or not. The magnitude of the radiation damping field was sufficiently strong to restore 95% of the equilibrium water magnetization of a 90% H 2O sample in a 5 mm sample tube within about 5 ms following a 165° pulse. This can be exploited in water flip-back versions of NOESY and TOCSY experiments of proteins, but care must be taken to limit the effect of the radiation damping field from the water on the H a protons. Long water-selective pulses can be applied only following corrections. We developed a program for correcting pulse shapes if β is non-zero. The WATERGATE scheme is shown to be insensitive to imperfections introduced by radiation damping.

  2. Collisional damping for ion temperature gradient mode driven zonal flow

    International Nuclear Information System (INIS)

    Xiao Yong; Catto, Peter J.; Molvig, Kim


    Zonal flow helps reduce and control the level of ion temperature gradient turbulence in a tokamak. The collisional damping of zonal flow has been estimated by Hinton and Rosenbluth (HR) in the large radial wavelength limit. Their calculation shows that the damping of zonal flow is closely related to the frequency response of neoclassical polarization of the plasma. Based on a variational principle, HR calculated the neoclassical polarization in the low and high collisionality limits. A new approach, based on an eigenfunction expansion of the collision operator, is employed to evaluate the neoclassical polarization and the zonal flow residual for arbitrary collisionality. An analytical expression for the temporal behavior of the zonal flow is also given showing that the damping rate tends to be somewhat slower than previously thought. These results are expected to be useful extensions of the original HR collisional work that can provide an effective benchmark for numerical codes for all regimes of collisionality

  3. Dynamics and Collapse in a Power System Model with Voltage Variation: The Damping Effect. (United States)

    Ma, Jinpeng; Sun, Yong; Yuan, Xiaoming; Kurths, Jürgen; Zhan, Meng


    Complex nonlinear phenomena are investigated in a basic power system model of the single-machine-infinite-bus (SMIB) with a synchronous generator modeled by a classical third-order differential equation including both angle dynamics and voltage dynamics, the so-called flux decay equation. In contrast, for the second-order differential equation considering the angle dynamics only, it is the classical swing equation. Similarities and differences of the dynamics generated between the third-order model and the second-order one are studied. We mainly find that, for positive damping, these two models show quite similar behavior, namely, stable fixed point, stable limit cycle, and their coexistence for different parameters. However, for negative damping, the second-order system can only collapse, whereas for the third-order model, more complicated behavior may happen, such as stable fixed point, limit cycle, quasi-periodicity, and chaos. Interesting partial collapse phenomena for angle instability only and not for voltage instability are also found here, including collapse from quasi-periodicity and from chaos etc. These findings not only provide a basic physical picture for power system dynamics in the third-order model incorporating voltage dynamics, but also enable us a deeper understanding of the complex dynamical behavior and even leading to a design of oscillation damping in electric power systems.

  4. Effects of temporal fluctuations on mixing (United States)

    Pool, Maria; Dentz, Marco; Post, Vincent E. A.; Simmons, Craig T.


    Mixing and dispersion in coastal aquifers are strongly influenced by periodic temporal flow fluctuations on multiple time-scales ranging from days (tides), seasons (pumping and recharge) to glacial cycles (regression and transgressions). Transient forcing effects lead to a complex space- ant time-dependent flow response which induces enhanced spreading and mixing of a dissolved substance. We study effective mixing and solute transport in temporally fluctuating one-dimensional flow for a stable stratification of two fluids of different density. We derive explicit expressions for the concentration distribution and variance to identify the controls and obtain realistic predictions of the coupling between mixing and oscillatory transient flow. We find that the magnitude of transient-driven mixing is mainly controlled by the hydraulic diffusivity, the period and the initial interface location. We also find a spatial dependence of the effective dispersion coefficient which at long times causes the concentration profile to become asymmetric. Sand column experiments under well-controlled laboratory conditions are presented to validate the theoretical effective model defined. The proposed formulation is found to provide very good predictions and correctly reproduces the experimental mixing dynamics.

  5. Damped nonlinear Schrodinger equation

    International Nuclear Information System (INIS)

    Nicholson, D.R.; Goldman, M.V.


    High frequency electrostatic plasma oscillations described by the nonlinear Schrodinger equation in the presence of damping, collisional or Landau, are considered. At early times, Landau damping of an initial soliton profile results in a broader, but smaller amplitude soliton, while collisional damping reduces the soliton size everywhere; soliton speeds at early times are unchanged by either kind of damping. For collisional damping, soliton speeds are unchanged for all time

  6. Finite Element Analysis of Static and Dynamic Pull-In Instability of a Fixed-Fixed Micro Beam Considering Damping Effects

    Directory of Open Access Journals (Sweden)

    Ghader Rezazadeh


    Full Text Available In this paper the static and dynamic pull-in phenomenon of a fixed-fixed micro beam, considering the effects of residual stress, axial stress, damping coefficient, and Fringing field effects have statically and dynamically been analyzed. The nonlinear electromechanical coupled integro- differential equation governing the problem has been derived using variational principle and solved using a computer code based on Finite element method. The problem has been solved for various values of damping coefficients, residual and axial stresses, and various initial gaps between the micro beam and the substrate. The results showed that by increase in damping coefficient the dynamic pull-in voltage is also increased but this increase is continued up to a definite value of damping coefficient more than which, the dynamic pull-in voltage is constant and equal to the static one. The pull-in time is also determined for various damping coefficients and has been shown that with increasing the damping coefficient the pull-in time is increased.

  7. The Effect of Grain-refinement on Zn-10Al Alloy Damping Properties

    Directory of Open Access Journals (Sweden)

    Piwowarski G.


    Full Text Available The paper is devoted to grain-refinement of the medium-aluminium zinc based alloys (MAl-Zn. The system examined was sand cast Zn- 10 wt. %. Al binary alloy (Zn-10Al doped with commercial Al-3 wt. % Ti - 0.15 wt. % C grain refiner (Al-3Ti-0.15C GR. Basing on the measured attenuation coefficient of ultrasonic wave it was stated that together with significantly increased structure fineness damping decreases only by about 10 - 20%. The following examinations should establish the influence of the mentioned grain-refinement on strength and ductility of MAl-Zn cast alloys.

  8. ICAN/DAMP-integrated composite analyzer with damping analysis capabilities: User's manual (United States)

    Saravanos, Dimitrious A.; Sanfeliz, Jose G.


    This manual describes the use of the computer code ICAN/DAMP (Integrated Composite Analyzer with Damping Analysis Capabilities) for the prediction of damping in polymer-matrix composites. The code is written in FORTRAN 77 and is a version of the ICAN (Integrated Composite ANalyzer) computer program. The code incorporates a new module for synthesizing the material damping from micromechanics to laminate level. Explicit micromechanics equations based on hysteretic damping are programmed relating the on-axis damping capacities to the fiber and matrix properties and fiber volume ratio. The damping capacities of unidirectional composites subjected to off-axis loading are synthesized from on-axis damping values. The hygrothermal effect on the damping performance of unidirectional composites caused by temperature and moisture variation is modeled along with the damping contributions from interfacial friction between broken fibers and matrix. The temperature rise is continuously vibrating composite plies and composite laminates is also estimated. The ICAN/DAMP user's manual provides descriptions of the damping analysis module's functions, structure, input requirements, output interpretation, and execution requirements. It only addresses the changes required to conduct the damping analysis and is used in conjunction with the 'Second Generation Integrated Composite Analyzer (ICAN) Computer Code' user's manual (NASA TP-3290).

  9. The Effect of High- and Low-Damping Prosthetic Foot Structures on Knee Loading in the Uninvolved Limb Across Different Walking Speeds. (United States)

    Jin, Li; Adamczyk, Peter G; Roland, Michelle; Hahn, Michael E


    Lower limb amputation has been associated with secondary impairments such as knee osteoarthritis in the uninvolved limb. Greater knee loading in the frontal plane has been related to severity and rate of progression in knee osteoarthritis. Reduced push-off work from the involved limb can increase uninvolved limb knee loading. However, little is known about specific effects that prosthetic foot damping may have on uninvolved limb loading. We hypothesized that uninvolved limb peak knee internal abduction moment (IAM) and loading rates would be greater when using a high-damping foot compared with a low-damping foot, across walking speeds. Eight healthy, young subjects walked in a prosthesis simulator boot using the experimental feet. Greater uninvolved limb first peak IAM (+16% in fast speed, P = .002; +11% in slow speed, P = .001) and loading rates (+11% in fast speed, P = .003) were observed when using the high-damping foot compared with low-damping foot. Within each foot, uninvolved limb first peak IAM and loading rates had a trend to increase with increased walking speed. These findings suggest that damping properties of prosthetic feet are related to uninvolved limb peak knee IAM and loading rates.

  10. Superconductive material and magnetic field for damping and levitation support and damping of cryogenic instruments (United States)

    Dolgin, Benjamin P. (Inventor)


    A superconductive load bearing support without a mechanical contact and vibration damping for cryogenic instruments in space is presented. The levitation support and vibration damping is accomplished by the use of superconducting magnets and the 'Meissner' effect. The assembly allows for transfer of vibration energy away from the cryogenic instrument which then can be damped by the use of either an electronic circuit or conventional vibration damping mean.

  11. Lateral vibration control of a precise machine using magneto-rheological mounts featuring multiple directional damping effect (United States)

    Kim, Hyung Tae; Jeong, An Mok; Kim, Hyo Young; An, Jong Wook; Kim, Cheol Ho; Jin, Kyung Chan; Choi, Seung-Bok


    In a previous work, magneto-rheological (MR) dampers were originally designed and implemented for reducing the vertical low-frequency vibration occurring in precise semi-conductor manufacturing equipment. To reduce the vibrations, an isolator levitated the manufacturing machine from the floor using pneumatic pressure which cut off the external vibration, while the MR damper was used to decrease the transient response of the isolator. However, it has been found that the MR damper also provides a damping effect on the lateral vibration induced by the high-speed plane motions. Therefore, in this work both vertical and lateral vibrations are controlled using the yield and shear stresses of the lateral directions generated from the MR fluids by applying a magnetic field. After deriving a vibration control model, an overall control logic is formulated considering both vertical and lateral vibrations. In this control strategy, a feedback loop associated with the laser sensor is used for vertical vibration control, while a feed-forward loop with the motion information is used for lateral vibration control. The experimental results show that the proposed concept is highly effective for lateral vibration control using the damping effect on multiple directions.

  12. Effects on perceived air quality and symptoms of exposure to microbially produced metabolites and compounds emitted from damp building materials. (United States)

    Claeson, A-S; Nordin, S; Sunesson, A-L


    This work investigated perceived air quality and health effects from exposure to low to high levels of volatile organic compounds (VOCs) emitted from damp building materials and a mixture of molds growing on the materials. A mixture of Wallemia sebi, Fusarium culmorum, Penicillium chrysogenum, Ulocladium botrytis, and Aspergillus versicolor was inoculated on pine wood and particle board. In Study 1, each of 27 participants took part in two exposure conditions, one with air from molds growing on building materials (low levels of emissions from the building materials and the mold mixture) and one with blank air, both conditions during 60 min. In Study 2, each of 24 participants was exposed (10 min) four times in a 2 x 2 design randomly to air from moldy building materials (high levels) and blank, with and without nose-clip. The participants rated air quality and symptoms before, during, and after each exposure. Self-reported tear-film break-up time and attention and processing speed (Study 1) was also measured. Exposure to high VOC levels increased the reports of perceived poor air quality, and in the condition without nose-clip enhanced skin symptoms were also noted. No such outcome was observed when exposing the participants to low VOC levels. Emissions from building materials caused by dampness and microbial growth may be involved in indoor air health problems. This study showed that exposure to high levels of VOC emitted from damp building materials and a mixture of mold may cause perceived poor air quality. It also indicated that stimulation of chemical warning systems (the nasal chemosensory part of the trigeminal system and the olfactory system) may enhance skin symptoms.

  13. Effect of state-dependent delay on a weakly damped nonlinear oscillator. (United States)

    Mitchell, Jonathan L; Carr, Thomas W


    We consider a weakly damped nonlinear oscillator with state-dependent delay, which has applications in models for lasers, epidemics, and microparasites. More generally, the delay-differential equations considered are a predator-prey system where the delayed term is linear and represents the proliferation of the predator. We determine the critical value of the delay that causes the steady state to become unstable to periodic oscillations via a Hopf bifurcation. Using asymptotic averaging, we determine how the system's behavior is influenced by the functional form of the state-dependent delay. Specifically, we determine whether the branch of periodic solutions will be either sub- or supercritical as well as an accurate estimation of the amplitude. Finally, we choose a few examples of state-dependent delay to test our analytical results by comparing them to numerical continuation.

  14. Effect of potassium and manganese phosphites in the control of Pythium damping-off in soybean: a feasible alternative to fungicide seed treatments. (United States)

    Carmona, Marcelo A; Sautua, Francisco J; Grijalba, Pablo E; Cassina, Mariano; Pérez-Hernández, Oscar


    Use of fungicide seed treatments for control of soybean soilborne diseases such as Pythium damping-off has increased worldwide. However, emergence of Pythium strains resistant to metalaxyl-M has prompted the need for alternative technologies to fungicides for damping-off control. The use of phosphites (Phis) has been proposed as a method to control oomycetes, but their use as seed treatments in soybean is limited by the lack of information on their efficacy. The effect of potassium (K) and manganese (Mn) Phis (as seed treatments) in the control of Pythium damping-off in soybean was evaluated in vitro and in vivo. In vitro, treated seeds and a control were placed on potato dextrose agar and the damping-off severity caused by Pythium aphanidermatum (Edson) Fitzpatrick, Pythium irregulare Buisman, and Pythium ultimum Trow was assessed 5 days after incubation using an ordinal scale. In vivo, treated seeds and a control were planted in polystyrene pots and emergence was evaluated 21 days after planting. Analysis of the in vitro data using a multinomial generalized linear model showed that the probabilities of non-germinated, dead seeds ranged from 0.64 to 1.00 in the control and from 0 to 0.13 in the Phi treatments in each of the Pythium species. Probabilities of seed germination without or with damping-off symptoms were significantly higher for seeds treated with the Phi products than for the control. In the in vivo experiment, the Phi-based products increased seedling emergence by up to 29% on average compared with the untreated control. Mn and K Phis are feasible alternatives as seed treatments to control Pythium damping-off in soybean. This study is the first, worldwide, to document the efficacy of K and Mn Phis in the control of soybean Pythium damping-off. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  15. Power oscillation damping controller

    DEFF Research Database (Denmark)


    A power oscillation damping controller is provided for a power generation device such as a wind turbine device. The power oscillation damping controller receives an oscillation indicating signal indicative of a power oscillation in an electricity network and provides an oscillation damping control...... signal in response to the oscillation indicating signal, by processing the oscillation damping control signal in a signal processing chain. The signal processing chain includes a filter configured for passing only signals within a predetermined frequency range....

  16. Phenomenology of chiral damping in noncentrosymmetric magnets

    KAUST Repository

    Akosa, Collins Ashu


    A phenomenology of magnetic chiral damping is proposed in the context of magnetic materials lacking inversion symmetry. We show that the magnetic damping tensor acquires a component linear in magnetization gradient in the form of Lifshitz invariants. We propose different microscopic mechanisms that can produce such a damping in ferromagnetic metals, among which local spin pumping in the presence of an anomalous Hall effect and an effective “s-d” Dzyaloshinskii-Moriya antisymmetric exchange. The implication of this chiral damping in terms of domain-wall motion is investigated in the flow and creep regimes.

  17. Single-Bunch Instability Driven by the Electron Cloud Effect in the Positron Damping Ring of the International Linear Collider

    International Nuclear Information System (INIS)

    Pivi, Mauro; Raubenheimer, Tor O.; Ghalam, Ali; Harkay, Katherine; Ohmi, Kazuhito; Wanzenberg, Rainer; Wolski, Andrzej; Zimmermann, Frank


    Collective instabilities caused by the formation of an electron cloud (EC) are a potential limitation to the performances of the damping rings for a future linear collider. In this paper, we present recent simulation results for the electron cloud build-up in damping rings of different circumferences and discuss the single-bunch instabilities driven by the electron cloud

  18. Damping of coupled harmonic oscillators (United States)

    Dolfo, Gilles; Vigué, Jacques


    When two harmonic oscillators are coupled in the presence of damping, their dynamics exhibit two very different regimes depending on the relative magnitude of the coupling and damping terms At resonance, when the coupling has its largest effect, if the coupling dominates the damping, there is a periodic exchange of energy between the two oscillators while, in the opposite case, the energy transfer from one oscillator to the other one is irreversible. We prove that the border between these two regimes goes through an exceptional point and we briefly explain what is an exceptional point. The present paper is written for undergraduate students, with some knowledge in classical mechanics, but it may also be of interest for graduate students.

  19. Dampness in buildings and health

    DEFF Research Database (Denmark)

    Bornehag, Carl-Gustaf; Blomquist, G.; Gyntelberg, F.


    in the epidemiological literature. A literature search identified 590 peer-reviewed articles of which 61 have been the foundation for this review. The review shows that "dampness" in buildings appears to increase the risk for health effects in the airways, such as cough, wheeze and asthma. Relative risks...

  20. Scattering Theory of Gilbert Damping

    NARCIS (Netherlands)

    Brataas, A.; Tserkovnyak, Y.; Bauer, G.E.W.


    The magnetization dynamics of a single domain ferromagnet in contact with a thermal bath is studied by scattering theory.We recover the Landau-Liftshitz-Gilbert equation and express the effective fields and Gilbert damping tensor in terms of the scattering matrix. Dissipation of magnetic energy

  1. Temporal grouping effects in musical short-term memory. (United States)

    Gorin, Simon; Mengal, Pierre; Majerus, Steve


    Recent theoretical accounts of verbal and visuo-spatial short-term memory (STM) have proposed the existence of domain-general mechanisms for the maintenance of serial order information. These accounts are based on the observation of similar behavioural effects across several modalities, such as temporal grouping effects. Across two experiments, the present study aimed at extending these findings, by exploring a STM modality that has received little interest so far, STM for musical information. Given its inherent rhythmic, temporal and serial organisation, the musical domain is of interest for investigating serial order STM processes such as temporal grouping. In Experiment 1, the data did not allow to determine the presence or the absence of temporal grouping effects. In Experiment 2, we observed that temporal grouping of tone sequences during encoding improves short-term recognition for serially presented probe tones. Furthermore, the serial position curves included micro-primacy and micro-recency effects, which are the hallmark characteristic of temporal grouping. Our results suggest that the encoding of serial order information in musical STM may be supported by temporal positional coding mechanisms similar to those reported in the verbal domain.

  2. Dr. Dampe - Doctor Democracy

    DEFF Research Database (Denmark)

    Andreasen, John


    On Dr.phil. J.J.Dampe's fight for democracy in the first part of the 19th century in Denmark and his dramatic writings......On Dr.phil. J.J.Dampe's fight for democracy in the first part of the 19th century in Denmark and his dramatic writings...

  3. Damping of reactor internals

    International Nuclear Information System (INIS)

    Singleton, N.R.; Bohm, G.J.


    This paper presents and discusses the results of a study of internals damping using data obtained from wave analysis of PWR plant flow tests, and shaker tests. The damping values were obtained from vibration data taken during the pre-operational testing of several reactor plants and some in air shaker tests. Parameters available in the data include the presence of the core, the presence and position of the control rod drive line, reactor coolant temperature, and combination of reactor coolant pumps in operation. Modal damping values for the structures reported were obtained from the decay of autocorrellograms or from the modal response half-power bandwidths of frequency spectra. For the lower frequency core barrel-reactor vessel beam modes 2% to 5% damping values were found for minimum damping values. Significantly higher values are found in the data when, for example, intermittent contact occurs at the core barrel level supports. Core barrel and thermal shield shell modes having natural frequencies in the frequency range of interest for seismic response calculations exhibit damping values generally on the order of 1% to 2%. Higher frequency, very low amplitude, shell modes of these structures can have damping values of less than 1%. Damping values for guide tubes were found to have minimum values of 2% to 5% depending on their core location. The cross flow velocity and thus the floor turbulence excited amplitude is higher for guide tubes in core locations near the outlet nozzles. Information on the damping of upper support columns which are similarly excited is also given. Damping values reported are suitable for normal operation design conditions, i.e., for oscillatory behavior and relatively small amplitudes. The extrapolation of the data to obtain realistic values for large seismic events and for loss of coolant accidents is also discussed

  4. Simple Program to Investigate Hysteresis Damping Effect of Cross-Ties on Cables Vibration of Cable-Stayed Bridges

    Directory of Open Access Journals (Sweden)

    Panagis G. Papadopoulos


    Full Text Available A short computer program, fully documented, is presented, for the step-by-step dynamic analysis of isolated cables or couples of parallel cables of a cable-stayed bridge, connected to each other and possibly with the deck of the bridge, by very thin pretensioned wires (cross-ties and subjected to variation of their axial forces due to traffic or to successive pulses of a wind drag force. A simplified SDOF model, approximating the fundamental vibration mode, is adopted for every individual cable. The geometric nonlinearity of the cables is taken into account by their geometric stiffness, whereas the material nonlinearities of the cross-ties include compressive loosening, tensile yielding, and hysteresis stress-strain loops. Seven numerical experiments are performed. Based on them, it is observed that if two interconnected parallel cables have different dynamic characteristics, for example different lengths, thus different masses, weights, and geometric stiffnesses, too, or if one of them has a small additional mass, then a single pretensioned very thin wire, connecting them to each other and possibly with the deck of the bridge, proves effective in suppressing, by its hysteresis damping, the vibrations of the cables.

  5. Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency

    Directory of Open Access Journals (Sweden)

    M. Haghgo


    Full Text Available Utilizing polymeric materials for damping mechanical waves is of great importance in various fields of applications such as military camouflage, prevention of structural vibrational energy transfer, and noise attenuation. This ability originates from segmental dynamics of chain-like polymer molecules. Damping properties of styrene-butadiene rubbercontaining 10 wt% of monosize polystyrene particles with different diameters (from 80 nm to 500 μm was investigated in the frequency range of vibration, sound, and ultrasound via dynamic mechanical thermal analysis, normalsound adsorption test, and ultrasound attenuation coefficient measurement. The obtained results indicated that for different systems, containing different sizes of polystyrene particles, the area under the damping curve does not show significant change comparing to the neat SBR in the frequency range studied. However, addition of polystyrene particles, specifically nanosized particles, resulted in emergence of a secondary glass transition temperature which could be attributed to the modified dynamics of a layer of matrix molecules near the surface of PS particles. In the range of sound frequency, 0.5 to 6.3 kHz, the maximum damping was observed for the system containing polystyrene nanoparticles. However the single damping curve of neat SBR was separated into two or even three distinct curves owing to the presence of the particles. The maximum damping in the ultrasound frequency range was found for the system containing 0.5 mm polystyrene particles. This is attributed to different contributions from matrix chains dynamics and the reflection of mechanical waves from particles-matrix interface at different frequency ranges. On other words, the increase in the glass transition temperature of the elastomeric matrix phase with increasing the mechanical wave frequency causes a reduction in the contribution from matrix chains dynamics while the contribution due to diffraction from dispersed

  6. Dissociable spatial and temporal effects of inhibition of return.

    Directory of Open Access Journals (Sweden)

    Zhiguo Wang

    Full Text Available Inhibition of return (IOR refers to the relative suppression of processing at locations that have recently been attended. It is frequently explored using a spatial cueing paradigm and is characterized by slower responses to cued than to uncued locations. The current study investigates the impact of IOR on overt visual orienting involving saccadic eye movements. Using a spatial cueing paradigm, our experiments have demonstrated that at a cue-target onset asynchrony (CTOA of 400 ms saccades to the vicinity of cued locations are not only delayed (temporal cost but also biased away (spatial effect. Both of these effects are basically no longer present at a CTOA of 1200 ms. At a shorter 200 ms CTOA, the spatial effect becomes stronger while the temporal cost is replaced by a temporal benefit. These findings suggest that IOR has a spatial effect that is dissociable from its temporal effect. Simulations using a neural field model of the superior colliculus (SC revealed that a theory relying on short-term depression (STD of the input pathway can explain most, but not all, temporal and spatial effects of IOR.

  7. Effect of radiation damping on the Child-Langmuir law in open diodes (United States)

    González, Gabriel


    We present a microscopic derivation of the space charge limited current for the motion of non-relativistic charged particles inside a parallel vacuum tube diode taking into account the radiation reaction force. We study the space charged limited current for two different limiting cases. Our results reveal that in the high field regime, the space charge current does not follow the Child-Langmuir law, while in the low field regime, the space charge current follows the Child-Langmuir law with an effective electrostatic field, i.e., the so-called modified Child-Langmuir law.

  8. Piezoelectric RL shunt damping of flexible structures

    DEFF Research Database (Denmark)

    Høgsberg, Jan Becker; Krenk, Steen


    Resonant RL shunt circuits represent a robust and effective approach to piezoelectric damping, provided that the individual shunt circuit components are calibrated accurately with respect to the dynamic properties of the corresponding flexible structure. The balanced calibration procedure applied...

  9. Damped long-term host-parasite Red Queen coevolutionary dynamics: a reflection of dilution effects? (United States)

    Decaestecker, Ellen; De Gersem, Herbert; Michalakis, Yannis; Raeymaekers, Joost A M


    An increase in biological diversity leads to a greater stability of ecosystem properties. For host-parasite interactions, this is illustrated by the 'dilution effect': a negative correlation between host biodiversity and disease risk. We show that a similar mechanism might stabilise host-parasite dynamics at a lower level of diversity, i.e. at the level of genetic diversity within host species. A long-term time shift experiment, based on a historical reconstruction of a Daphnia-parasite coevolution, reveals infectivity cycles with more stable amplitude in experienced than in naive hosts. Coevolutionary models incorporating an increase in host allelic diversity over time explain the detected asymmetry. The accumulation of resistance alleles creates an opportunity for the host to stabilise Red Queen dynamics. It leads to a larger arsenal enhancing the host performance in its coevolution with the parasite in which 'it takes all the running both antagonists can do to keep in the same place'. © 2013 John Wiley & Sons Ltd/CNRS.

  10. The Effect of a Vibration Absorber on the Damping Properties of Alpine Skis

    Directory of Open Access Journals (Sweden)

    Stefan Schwanitz


    Full Text Available Coupled bending-torsion vibrations at the shovel are a severe problem when running an alpine ski at high velocities on hard or icy slopes. Thus, a major goal for ski manufacturers is to dampen vibrations through a proper multi-material design and/or additional absorbers. The aim of this study was to examine the effectiveness of a particular vibration absorber on a commercial slalom ski through a series of laboratory tests as well as a subjective field evaluation. Therefore, two identical pairs of ski were used and the absorber was deactivated on one pair. Laboratory tests revealed reductions of 5% to 49% of bending vibrations on skis with activated absorber. Subjective evaluation by 6 subjects suggested minor differences in the mean of the evaluated criteria turnablity, edge grip, steering behavior and stability towards a better performance of the skis with activated absorber. Subjects were able to identify the absorber mode with a success rate of 61.1%.

  11. Radiation damping of a polarizable particle (United States)

    Novotny, Lukas


    A polarizable body moving in an external electromagnetic field will slow down. This effect is referred to as radiation damping and is analogous to Doppler cooling in atomic physics. Using the principles of special relativity we derive an expression for the radiation damping force and find that it solely depends on the scattered power. The cooling of the particle's center-of-mass motion is balanced by heating due to radiation pressure shot noise, giving rise to an equilibrium that depends on the ratio of the field's frequency and the particle's mass. While damping is of relativistic nature, heating has its roots in quantum mechanics.

  12. Roll Damping By Rudder Control

    DEFF Research Database (Denmark)

    Stoustrup, Jakob; Niemann, H.H.; Blanke, M.


    Roll damping and simultaneous course steering by rudder control is a challenging problem where a key factor is roll damping performance in waves.......Roll damping and simultaneous course steering by rudder control is a challenging problem where a key factor is roll damping performance in waves....

  13. Extended Rayleigh Damping Model

    Directory of Open Access Journals (Sweden)

    Naohiro Nakamura


    Full Text Available In dynamic analysis, frequency domain analysis can be used if the entire structure is linear. However, time history analysis is generally used if nonlinear elements are present. Rayleigh damping has been widely used in time history response analysis. Many articles have reported the problems associated with this damping and suggested remedies. A basic problem is that the frequency area across which the damping ratio is almost constant is too narrow. If the area could be expanded while incurring only a small increase in computational cost, this would provide an appropriate remedy for this problem. In this study, a novel damping model capable of expanding the constant frequency area by more than five times was proposed based on the study of a causal damping model. This model was constructed by adding two terms to the Rayleigh damping model and can be applied to the linear elements in the time history analysis of a nonlinear structure. The accuracy and efficiency of the model were confirmed using example analyses.

  14. A damping boundary condition for atomistic-continuum coupling

    International Nuclear Information System (INIS)

    Zhang Jie; Tieu, Kiet; Michal, Guillaume; Zhu Hongtao; Zhang Liang; Su Lihong; Deng Guanyu; Wang Hui


    The minimization of spurious wave reflection is a challenge in multiscale coupling due to the difference of spatial resolution between atomistic and continuum regions. In this study, a new damping condition is presented for eliminating spurious wave reflection at the interface between atomistic and continuum regions. This damping method starts by a coarse–fine decomposition of the atomic velocity based on the bridging scale method. The fine scale velocity of the atoms in the damping region is reduced by applying nonlinear damping coefficients. The effectiveness of this damping method is verified by one- and two- dimensional simulations. (paper)

  15. Effects of exposure to DAMPS and GSM signals on ornithine decarboxylase (ODC) activity: II. SH-SY5Y human neuroblastoma cells. (United States)

    Billaudel, Bernard; Taxile, Murielle; Poulletier de Gannes, Florence; Ruffie, Gilles; Lagroye, Isabelle; Veyret, Bernard


    An increase in Ornithine Decarboxylase (ODC) activity was reported in L929 murine fibroblast cells after exposure to a digital cellular telephone signal. This result was not confirmed by several other studies, including the one reported in a companion paper. As a partner in the Perform-B programme, we extended this study to human neuroblastoma cells (SH-SY5Y), using well-defined waveguide systems to imitate exposure to radiofrequency radiation (RFR): Digital Advanced Mobile Phone System (DAMPS) or Global System for Mobile communications (GSM) signals emitted by mobile phones. Human neuroblastoma cells (SH-SY5Y) were exposed at various Specific Absorption Rates (SAR) to DAMPS or GSM signals using different set-ups. Cell ODC activities were assayed using 14CO2 generation from 14C-labeled L-ornithine. SH-SY5Y cells were incubated for 20 hours, and were blindly exposed to 50 Hz-modulated DAMPS-835 or 217 Hz-modulated GSM-1800 for 8 or 24 h using Information Technologies in Society (IT'IS) waveguides equipped with fans. After cell lysis, ODC activity was determined using 14C-labeled L-ornithine. ODC activity was estimated by the 14CO2 generated from 14C-labeled L-ornithine, as generated d.p.m. 14CO2/h/mg protein. The results showed that, irrespective of the signal used (835 MHz/DAMPS, or 1800 MHz/GSM) and exposure conditions (duration and SAR), human SH-SY5Y neuroblastoma cells did not exhibit any alteration in ODC enzyme activity. This work did not show a significant effect of mobile phone RFR exposure on ODC activity in neuroblastoma cells (SH-SY5Y).

  16. Determinants of Temporal Variations in Advertising Effectiveness


    Chung, Chanjin; Kaiser, Harry M.


    This article develops a varying-parameter advertising model which specifies advertising parameters as a function of variables representing advertising strategies and market environments to explain the varying nature of the advertising responses. Unlike prior models, this model allows researchers to examine the sources of change in advertising effectiveness over time. The model is applied to the New York City fluid milk market for the period from January 1986 through June 1995. Results indicat...

  17. Damping Effect of Humans

    DEFF Research Database (Denmark)

    Pedersen, Lars

    Passive humans (sitting or standing) might well be present on flooring-systems, footbridges or other structures that carry humans. An active croud of people might generate structural vibrations, and these might be problematic. The passive crowd of people, however, will interact with the structura...

  18. The Contrast Effect in Temporal and Probabilistic Discounting (United States)

    Chen, Cheng; He, Guibing


    In this information age, messages related to time, and uncertainty surround us. At the same time, our daily lives are filled with decisions accompanied by temporal delay or uncertainty. Will such information influence our temporal and probabilistic discounting? The authors address this question from the perspectives of decision by sampling (DbS) theory and psychological distance theory. Studies 1 and 2 investigated the effect of contextual messages on temporal discounting and probabilistic discounting, respectively. The results indicated that participants who memorized messages about long-term and low-probability events rated delay or uncertainty as mentally closer and exhibited a less degree of value discounting than those who memorized messages regarding short-term and high-probability events. In addition, a sense of distance from present or reality mediated the effect of contextual messages on value discounting. The implications of the current findings for theory and applications are discussed. PMID:27014122

  19. Sound propagation in narrow tubes including effects of viscothermal and turbulent damping with application to charge air coolers (United States)

    Knutsson, Magnus; Åbom, Mats


    Charge air coolers (CACs) are used on turbocharged internal combustion engines to enhance the overall gas-exchange performance. The cooling of the charged air results in higher density and thus volumetric efficiency. It is also important for petrol engines that the knock margin increases with reduced charge air temperature. A property that is still not very well investigated is the sound transmission through a CAC. The losses, due to viscous and thermal boundary layers as well as turbulence, in the narrow cooling tubes result in frequency dependent attenuation of the transmitted sound that is significant and dependent on the flow conditions. Normally, the cross-sections of the cooling tubes are neither circular nor rectangular, which is why no analytical solution accounting for a superimposed mean flow exists. The cross-dimensions of the connecting tanks, located on each side of the cooling tubes, are large compared to the diameters of the inlet and outlet ducts. Three-dimensional effects will therefore be important at frequencies significantly lower than the cut-on frequencies of the inlet/outlet ducts. In this study the two-dimensional finite element solution scheme for sound propagation in narrow tubes, including the effect of viscous and thermal boundary layers, originally derived by Astley and Cummings [Wave propagation in catalytic converters: Formulation of the problem and finite element scheme, Journal of Sound and Vibration 188 (5) (1995) 635-657] is used to extract two-ports to represent the cooling tubes. The approximate solutions for sound propagation, accounting for viscothermal and turbulent boundary layers derived by Dokumaci [Sound transmission in narrow pipes with superimposed uniform mean flow and acoustic modelling of automobile catalytic converters, Journal of Sound and Vibration 182 (5) (1995) 799-808] and Howe [The damping of sound by wall turbulent shear layers, Journal of the Acoustical Society of America 98 (3) (1995) 1723-1730], are

  20. Research on cylindrical resonators’ damping asymmetry trimming method utilizing damping characteristic of piezoelectric electrodes

    Directory of Open Access Journals (Sweden)

    Jiangkun Sun


    Full Text Available The damping asymmetry of cylindrical resonators is one of the major sources which result in the gyroscope’s drift. In this paper, a new approach for trimming the damping asymmetry of cylindrical resonators is proposed. The damping asymmetry trimming model is established to analyze the additional damping’s influences. Furthermore, piezoelectric electrodes’ effects on the cylindrical resonator’s damping characteristic are figured out through the finite element simulation. The procedures of this trimming method are also summarized based on theoretical analysis. At last, these theoretical analysis and simulation results are utilized to compensate the damping asymmetry of cylindrical resonators and the procedures of this trimming method are also summarized. Experiments are also implemented to verify this trimming method.

  1. Numerical studies of shear damped composite beams using a constrained damping layer

    DEFF Research Database (Denmark)

    Kristensen, R.F.; Nielsen, Kim Lau; Mikkelsen, Lars Pilgaard


    Composite beams containing one or more damping layers are studied numerically. The work is based on a semi-analytical model using a Timoshenko beam theory and a full 2D finite element model. The material system analysed, is inspired by a train wagon suspension system used in a EUREKA project Sigma......!1841. For the material system, the study shows that the effect of the damping layer is strongly influenced by the presence of a stiff constraining layer, that enforces large shear strain amplitudes. The thickness of the damping rubber layer itself has only a minor influence on the overall damping....... In addition, a large influence of ill positioned cuts in the damping layer is observed....

  2. Experimental validation of damping properties and solar pressure effects on flexible, high area-to-mass ratio debris model (United States)

    Channumsin, Sittiporn; Ceriotti, Matteo; Radice, Gianmarco; Watson, Ian


    Multilayer insulation (MLI) is a recently-discovered type of debris originating from delamination of aging spacecraft; it is mostly detected near the geosynchronous orbit (GEO). Observation data indicates that these objects are characterised by high reflectivity, high area-to-mass ratio (HAMR), fast rotation, high sensitivity to perturbations (especially solar radiation pressure) and change of area-to-mass ratio (AMR) over time. As a result, traditional models (e.g. cannonball) are unsuitable to represent and predict this debris' orbital evolution. Previous work by the authors effectively modelled the flexible debris by means of multibody dynamics to improve the prediction accuracy. The orbit evolution with the flexible model resulted significantly different from using the rigid model. This paper aims to present a methodology to determine the dynamic properties of thin membranes with the purpose to validate the deformation characteristics of the flexible model. A high-vacuum chamber (10-4 mbar) to significantly decrease air friction, inside which a thin membrane is hinged at one end but free at the other provides the experimental setup. A free motion test is used to determine the damping characteristics and natural frequency of the thin membrane via logarithmic decrement and frequency response. The membrane can swing freely in the chamber and the motion is tracked by a static, optical camera, and a Kalman filter technique is implemented in the tracking algorithm to reduce noise and increase the tracking accuracy of the oscillating motion. Then, the effect of solar radiation pressure on the thin membrane is investigated: a high power spotlight (500-2000 W) is used to illuminate the sample and any displacement of the membrane is measured by means of a high-resolution laser sensor. Analytic methods from the natural frequency response and Finite Element Analysis (FEA) including multibody simulations of both experimental setups are used for the validation of the

  3. Damping in building structures during earthquakes: test data and modeling

    International Nuclear Information System (INIS)

    Coats, D.W. Jr.


    A review and evaluation of the state-of-the-art of damping in building structures during earthquakes is presented. The primary emphasis is in the following areas: 1) the evaluation of commonly used mathematical techniques for incorporating damping effects in both simple and complex systems; 2) a compilation and interpretation of damping test data; and 3) an evaluation of structure testing methods, building instrumentation practices, and an investigation of rigid-body rotation effects on damping values from test data. A literature review provided the basis for evaluating mathematical techiques used to incorporate earthquake induced damping effects in simple and complex systems. A discussion on the effectiveness of damping, as a function of excitation type, is also included. Test data, from a wide range of sources, has been compiled and interpreted for buidings, nuclear power plant structures, piping, equipment, and isolated structural elements. Test methods used to determine damping and frequency parameters are discussed. In particular, the advantages and disadvantages associated with the normal mode and transfer function approaches are evaluated. Additionally, the effect of rigid-body rotations on damping values deduced from strong-motion building response records is investigated. A discussion of identification techniques typically used to determine building parameters (frequency and damping) from strong motion records is included. Finally, an analytical demonstration problem is presented to quantify the potential error in predicting fixed-base structural frequency and damping values from strong motion records, when rigid-body rotations are not properly accounted for


    Directory of Open Access Journals (Sweden)

    Valentina Yu. Guleva


    Full Text Available The effect of initial network topology on a temporal network dynamics is studied. An example of interbank exposures network is considered. It is modeled with a graph, where banks are represented by nodes and interbank lending is represented by edges. The dynamical processes in аtemporal network are defined by state changes of nodes and lie in edges and nodes addition and deletion in a graph, and modification of node states contribute to network evolution. The algorithm of network modification over the whole evolution period is fixed. We present parameters of random, scale free and small world generative models corresponding to different simulation results with fixed modification algorithms. The influence of initial graph topologies on temporal network dynamics is demonstrated. The results obtained give the possibility to assess time interval before the attainment of unstable topology state, and to estimate an optimal topology for the transition to a steady state under fixed modification algorithms.

  5. Effect of risk perception on epidemic spreading in temporal networks (United States)

    Moinet, Antoine; Pastor-Satorras, Romualdo; Barrat, Alain


    Many progresses in the understanding of epidemic spreading models have been obtained thanks to numerous modeling efforts and analytical and numerical studies, considering host populations with very different structures and properties, including complex and temporal interaction networks. Moreover, a number of recent studies have started to go beyond the assumption of an absence of coupling between the spread of a disease and the structure of the contacts on which it unfolds. Models including awareness of the spread have been proposed, to mimic possible precautionary measures taken by individuals that decrease their risk of infection, but have mostly considered static networks. Here, we adapt such a framework to the more realistic case of temporal networks of interactions between individuals. We study the resulting model by analytical and numerical means on both simple models of temporal networks and empirical time-resolved contact data. Analytical results show that the epidemic threshold is not affected by the awareness but that the prevalence can be significantly decreased. Numerical studies on synthetic temporal networks highlight, however, the presence of very strong finite-size effects, resulting in a significant shift of the effective epidemic threshold in the presence of risk awareness. For empirical contact networks, the awareness mechanism leads as well to a shift in the effective threshold and to a strong reduction of the epidemic prevalence.

  6. Magnetic damping phenomena in ferromagnetic thin-films and multilayers (United States)

    Azzawi, S.; Hindmarch, A. T.; Atkinson, D.


    Damped ferromagnetic precession is an important mechanism underpinning the magnetisation processes in ferromagnetic materials. In thin-film ferromagnets and ferromagnetic/non-magnetic multilayers, the role of precession and damping can be critical for spintronic device functionality and as a consequence there has been significant research activity. This paper presents a review of damping in ferromagnetic thin-films and multilayers and collates the results of many experimental studies to present a coherent synthesis of the field. The terms that are used to define damping are discussed with the aim of providing consistent definitions for damping phenomena. A description of the theoretical basis of damping is presented from early developments to the latest discussions of damping in ferromagnetic thin-films and multilayers. An overview of the time and frequency domain methods used to study precessional magnetisation behaviour and damping in thin-films and multilayers is also presented. Finally, a review of the experimental observations of magnetic damping in ferromagnetic thin-films and multilayers is presented with the most recent explanations. This brings together the results from many studies and includes the effects of ferromagnetic film thickness, the effects of composition on damping in thin-film ferromagnetic alloys, the influence of non-magnetic dopants in ferromagnetic films and the effects of combining thin-film ferromagnets with various non-magnetic layers in multilayered configurations.

  7. Effect of dust ion collision on dust ion acoustic waves in the framework of damped Zakharov-Kuznetsov equation in presence of external periodic force (United States)

    Kanti Das, Tushar; Ali, Rustam; Chatterjee, Prasanta


    The dynamics of dust ion acoustic waves (DIAWs) is investigated in a magnetized dusty plasma whose constituents are cold ions, superthermal electrons, and dust particles in the framework of a damped Zakharov-Kuznetsov (dZK) equation in the presence of externally applied periodic force. The dZK equation is derived employing the standard reductive perturbation technique. The effect of dust ion collision on the quasiperiodic and chaotic motion of dust ion acoustic waves is discussed. It is observed that the collision frequency νid 0 plays the role of a switching parameter from the quasiperiodic route to chaos for the DIAWs.

  8. Influence ofde qion the immediate analgesic effect of SP6 acupuncture in patients with primary dysmenorrhoea andcold and dampness stagnation: a multicentre randomised controlled trial. (United States)

    Zhao, Min-Yi; Zhang, Peng; Li, Jing; Wang, Lin-Peng; Zhou, Wei; Wang, Yan-Xia; She, Yan-Fen; Ma, Liang-Xiao; Wang, Pei; Hu, Ni-Juan; Lin, Chi; Hu, Shang-Qin; Wu, Gui-Wen; Wang, Ya-Feng; Sun, Jun-Jun; Jiang, Si-Zhu; Zhu, Jiang


    The aim of this multicentre randomised controlled trial was to investigate the contribution of de qi to the immediate analgesic effect of acupuncture in patients with primary dysmenorrhoea and the specific traditional Chinese medicine diagnosis cold and dampness stagnation . Eighty-eight patients with primary dysmenorrhoea and cold and dampness stagnation were randomly assigned to de qi (n=43) or no de qi (n=45) groups and underwent 30 min of SP6 acupuncture. The de qi group received deep needling at SP6 with manipulation using thick needles; the no de qi group received shallow needling with no manipulation using thin needles. In both groups the pain scores and actual de qi sensation were evaluated using a visual analogue scale for pain (VAS-P) and the acupuncture de qi clinical assessment scale (ADCAS), respectively. Both groups showed reductions in VAS-P, with no signficant differences between groups. ADCAS scores showed 43/43 and 25/45 patients in de qi and no de qi groups, respectively, actually experienced de qi sensation. Independent of original group allocation, VAS-P reductions associated with actual de qi (n=68) were greater than those without (28.4±18.19 mm vs 14.6±12.28 mm, p=0.008). This study showed no significant difference in VAS-P scores in patients with primary dysmenorrhoea and cold and dampness stagnation immediately after SP6 acupuncture designed to induce or avoid de qi sensation. Both treatments significantly reduced VAS-P relative to baseline. Irrespective of group allocation, patients experiencing actual de qi sensation demonstrated larger reductions in pain score relative to those without, suggesting greater analgesic effects. Chinese Clinical Trial Registry (ChiCTR-TRC-13003086); Results. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  9. Spatial Temporal Modelling of Particulate Matter for Health Effects Studies (United States)

    Hamm, N. A. S.


    Epidemiological studies of the health effects of air pollution require estimation of individual exposure. It is not possible to obtain measurements at all relevant locations so it is necessary to predict at these space-time locations, either on the basis of dispersion from emission sources or by interpolating observations. This study used data obtained from a low-cost sensor network of 32 air quality monitoring stations in the Dutch city of Eindhoven, which make up the ILM (innovative air (quality) measurement system). These stations currently provide PM10 and PM2.5 (particulate matter less than 10 and 2.5 m in diameter), aggregated to hourly means. The data provide an unprecedented level of spatial and temporal detail for a city of this size. Despite these benefits the time series of measurements is characterized by missing values and noisy values. In this paper a space-time analysis is presented that is based on a dynamic model for the temporal component and a Gaussian process geostatistical for the spatial component. Spatial-temporal variability was dominated by the temporal component, although the spatial variability was also substantial. The model delivered accurate predictions for both isolated missing values and 24-hour periods of missing values (RMSE = 1.4 μg m-3 and 1.8 μg m-3 respectively). Outliers could be detected by comparison to the 95% prediction interval. The model shows promise for predicting missing values, outlier detection and for mapping to support health impact studies.

  10. Damping Analysis of Cylindrical Composite Structures with Enhanced Viscoelastic Properties (United States)

    Kliem, Mathias; Høgsberg, Jan; Vanwalleghem, Joachim; Filippatos, Angelos; Hoschützky, Stefan; Fotsing, Edith-Roland; Berggreen, Christian


    Constrained layer damping treatments are widely used in mechanical structures to damp acoustic noise and mechanical vibrations. A viscoelastic layer is thereby applied to a structure and covered by a stiff constraining layer. When the structure vibrates in a bending mode, the viscoelastic layer is forced to deform in shear mode. Thus, the vibration energy is dissipated as low grade frictional heat. This paper documents the efficiency of passive constrained layer damping treatments for low frequency vibrations of cylindrical composite specimens made of glass fibre-reinforced plastics. Different cross section geometries with shear webs have been investigated in order to study a beneficial effect on the damping characteristics of the cylinder. The viscoelastic damping layers are placed at different locations within the composite cylinder e.g. circumferential and along the neutral plane to evaluate the location-dependent efficiency of constrained layer damping treatments. The results of the study provide a thorough understanding of constrained layer damping treatments and an improved damping design of the cylindrical composite structure. The highest damping is achieved when placing the damping layer in the neutral plane perpendicular to the bending load. The results are based on free decay tests of the composite structure.

  11. Research on the impact of surface properties of particle on damping effect in gear transmission under high speed and heavy load (United States)

    Xiao, Wangqiang; Chen, Zhiwei; Pan, Tianlong; Li, Jiani


    The vibration and noise from gear transmission have great damage on the mechanical equipment and operators. Through inelastic collisions and friction between particles, the energy can be dissipated in gear transmission. A dynamic model of particle dampers in gear transmission was put forward in this paper. The performance of particle dampers in centrifugal fields under different rotational speeds and load was investigated. The surface properties such as the impact of coefficient of restitution and friction coefficient of the particle on the damping effect were analyzed and the total energy loss was obtained by discrete element method (DEM). The vibration from time-varying mesh stiffness was effectively reduced by particle dampers and the optimum coefficient of restitution was discovered under different rotational speeds and load. Then, a test bench for gear transmission was constructed, and the vibration of driven gear and driving gear were measured through a three-directional wireless acceleration sensor. The research results agree well with the simulation results. While at relatively high speed, smaller coefficient of restitution achieves better damping effect. As to friction coefficient, at relatively high speed, the energy dissipation climbs up and then declines with the increase of the friction coefficient. The results can provide guidelines for the application of particle damper in gear transmission.

  12. Imaging memory in temporal lobe epilepsy: predicting the effects of temporal lobe resection. (United States)

    Bonelli, Silvia B; Powell, Robert H W; Yogarajah, Mahinda; Samson, Rebecca S; Symms, Mark R; Thompson, Pamela J; Koepp, Matthias J; Duncan, John S


    Functional magnetic resonance imaging can demonstrate the functional anatomy of cognitive processes. In patients with refractory temporal lobe epilepsy, evaluation of preoperative verbal and visual memory function is important as anterior temporal lobe resections may result in material specific memory impairment, typically verbal memory decline following left and visual memory decline after right anterior temporal lobe resection. This study aimed to investigate reorganization of memory functions in temporal lobe epilepsy and to determine whether preoperative memory functional magnetic resonance imaging may predict memory changes following anterior temporal lobe resection. We studied 72 patients with unilateral medial temporal lobe epilepsy (41 left) and 20 healthy controls. A functional magnetic resonance imaging memory encoding paradigm for pictures, words and faces was used testing verbal and visual memory in a single scanning session on a 3T magnetic resonance imaging scanner. Fifty-four patients subsequently underwent left (29) or right (25) anterior temporal lobe resection. Verbal and design learning were assessed before and 4 months after surgery. Event-related functional magnetic resonance imaging analysis revealed that in left temporal lobe epilepsy, greater left hippocampal activation for word encoding correlated with better verbal memory. In right temporal lobe epilepsy, greater right hippocampal activation for face encoding correlated with better visual memory. In left temporal lobe epilepsy, greater left than right anterior hippocampal activation on word encoding correlated with greater verbal memory decline after left anterior temporal lobe resection, while greater left than right posterior hippocampal activation correlated with better postoperative verbal memory outcome. In right temporal lobe epilepsy, greater right than left anterior hippocampal functional magnetic resonance imaging activation on face encoding predicted greater visual memory decline

  13. Amplitude dependent damping in single crystalline high purity molybdenum

    International Nuclear Information System (INIS)

    Zelada-Lambri, G.I; Lambri, O.A; Garcia, J.A; Lomer, J.N


    Amplitude dependent damping measurements were performed on high purity single crystalline molybdenum at several different constant temperatures between room temperature and 1273K. The employed samples were single crystals with the orientation, having a residual resistivity ratio of about 8000. Previously to the amplitude dependent damping tests, the samples were subjected to different thermomechanical histories. Amplitude dependent damping effects appear only during the first heating run in temperature where the samples have the thermomechanical state of the deformation process at room temperature. In the subsequent run-ups in temperature, i.e, after subsequent annealings, amplitude dependent damping effects were not detected (au)

  14. Material damping measurement techniques (United States)

    Jewsbury, Peter

    Consideration is given to ways of measuring vibration damping, the experimental and analytical problems encountered, and definitions of attenuation coefficients. A versatile PC-based apparatus built for measuring the damping of forced flexural vibrations in a beam subjected to static loading within a controlled environment chamber is described. The fixed end provides an inertial reference point and the other end is subjected to static and dynamic forces. This allows the dependences of the attenuation on temperature, humidity, dynamic stress, static stress, aging, fatiguing, etc. to be assessed. The equipment can be operated in real time to give response functions and phase lags as a function of frequency or in a delayed processing mode which samples data at one frequency only and after a delayed analysis directly calculates an attenuation coefficient. Ways of handling and processing the data to minimize errors and avoid unnecessary assumptions relating to the linearity of the response or the nature of the attenuation are highlighted.

  15. Can monaural temporal masking explain the ongoing precedence effect? (United States)

    Freyman, Richard L; Morse-Fortier, Charlotte; Griffin, Amanda M; Zurek, Patrick M


    The precedence effect for transient sounds has been proposed to be based primarily on monaural processes, manifested by asymmetric temporal masking. This study explored the potential for monaural explanations with longer ("ongoing") sounds exhibiting the precedence effect. Transient stimuli were single lead-lag noise burst pairs; ongoing stimuli were trains of 63 burst pairs. Unlike with transients, monaural masking data for ongoing sounds showed no advantage for the lead, and are inconsistent with asymmetric audibility as an explanation for ongoing precedence. This result, along with supplementary measurements of interaural time discrimination, suggests different explanations for transient and ongoing precedence.

  16. On Landau damping

    KAUST Repository

    Mouhot, Clément


    Going beyond the linearized study has been a longstanding problem in the theory of Landau damping. In this paper we establish exponential Landau damping in analytic regularity. The damping phenomenon is reinterpreted in terms of transfer of regularity between kinetic and spatial variables, rather than exchanges of energy; phase mixing is the driving mechanism. The analysis involves new families of analytic norms, measuring regularity by comparison with solutions of the free transport equation; new functional inequalities; a control of non-linear echoes; sharp "deflection" estimates; and a Newton approximation scheme. Our results hold for any potential no more singular than Coulomb or Newton interaction; the limit cases are included with specific technical effort. As a side result, the stability of homogeneous equilibria of the non-linear Vlasov equation is established under sharp assumptions. We point out the strong analogy with the KAM theory, and discuss physical implications. Finally, we extend these results to some Gevrey (non-analytic) distribution functions. © 2011 Institut Mittag-Leffler.

  17. Modeling vibration response and damping of cables and cabled structures (United States)

    Spak, Kaitlin S.; Agnes, Gregory S.; Inman, Daniel J.


    In an effort to model the vibration response of cabled structures, the distributed transfer function method is developed to model cables and a simple cabled structure. The model includes shear effects, tension, and hysteretic damping for modeling of helical stranded cables, and includes a method for modeling cable attachment points using both linear and rotational damping and stiffness. The damped cable model shows agreement with experimental data for four types of stranded cables, and the damped cabled beam model shows agreement with experimental data for the cables attached to a beam structure, as well as improvement over the distributed mass method for cabled structure modeling.

  18. Performance Characteristics of the Magnetic Constrained Layer Damping

    Directory of Open Access Journals (Sweden)

    A. Baz


    Full Text Available A new class of surface damping treatment is proposed to provide effective means for attenuating undesirable structural vibrations. The proposed treatment relies in its operation on the use of smart damping treatments which consist of integrated arrays of constrained visco-elastic damping layers that are controlled passively by a specially arranged network of permanent magnets. The interaction between the magnets and the visco-elastic layers aims at enhancing the energy dissipation characteristics of the damping treatments. In this manner, it would be possible to manufacture structures that are light in weight which are also capable of meeting strict constraints on structural vibration when subjected to unavoidable disturbances.

  19. Effect of passive smoking on auditory temporal resolution in children. (United States)

    Durante, Alessandra Spada; Massa, Beatriz; Pucci, Beatriz; Gudayol, Nicolly; Gameiro, Marcella; Lopes, Cristiane


    To determine the effect of passive smoking on auditory temporal resolution in primary school children, based on the hypothesis that individuals who are exposed to smoking exhibit impaired performance. Auditory temporal resolution was evaluated using the Gaps In Noise (GIN) test. Exposure to passive smoking was assessed by measuring nicotine metabolite (cotinine) excreted in the first urine of the day. The study included 90 children with mean age of 10.2 ± 0.1 years old from a public school in São Paulo. Participants were divided into two groups: a study group, comprising 45 children exposed to passive smoking (cotinine > 5 ng/mL); and a control group, constituting 45 children who were not exposed to passive smoking. All participants had normal audiometry and immittance test results. Statistically significant differences (p smoking had poorer performance both in terms of thresholds and correct responses percentage on auditory temporal resolution assessment. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Electric-field effects on magnetic anisotropy and damping constant in Ta/CoFeB/MgO investigated by ferromagnetic resonance (United States)

    Okada, A.; Kanai, S.; Yamanouchi, M.; Ikeda, S.; Matsukura, F.; Ohno, H.


    We investigate electric-field effects on the effective magnetic anisotropy energy density Keff and the Gilbert damping constant α in Ta/CoFeB/MgO structures with CoFeB thickness t ranging from 1.4 to 1.8 nm by ferromagnetic resonance. The electric field-induced modulation ratio of the areal energy density Kefft does not depend on the CoFeB thickness, indicating that the electric-field effect on the magnetic anisotropy originates from the modulation of CoFeB/MgO-interfacial magnetic anisotropy. A clear electric-field modulation of α is observed for the structure with t = 1.4 nm, and almost no modulation for the structures with t ≥ 1.5 nm.

  1. Confirmation of soil radiation damping from test versus analysis

    International Nuclear Information System (INIS)

    Eidinger, J.M.; Mukhim, G.S.; Desmond, T.P.


    The work was performed to demonstrate that soil-structure interaction effects for nuclear plant structures can be accurately (and conservatively) predicted using the finite element or soil spring methods of soil-structure interaction analysis. Further, the work was done to investigate the relative importance of soil radiation versus soil material damping in the total soil damping analytical treatment. The analytical work was benchmarked with forced vibration tests of a concrete circular slab resting on the soil surface. The applied loading was in the form of a suddenly applied pulse load, or snapback. The measured responses of the slap represent the free vibration of the slab after the pulse load has been applied. This simplifies the interpretation of soil damping, by the use of the logarithmic decay formulation. To make comparisons with the test results, the damping data calculated from the analytical models is also based on the logarithmic decay formulation. An attempt is made to differentiate the observed damped behavior of the concrete slab as being caused by soil radiation versus soil material damping. It is concluded that both the traditional soil radiation and material damping analytical simplifications are validated by the observed responses. It is concluded that arbitrary 'conservative' assumptions traditionally made in nuclear plant soil-structure interaction analyses are indeed arbitrary, and not born out by physical evidence. The amount of conservatism introduced by limiting total soil damping to values like 5% to 10% can be large. For the test slab sizes investigated, total soil damping is about 25%. For full size nuclear plant foundations, total soil damping is commonly in the 35% to 70% range. The authors suggest that full soil damping values (the combined radiation and material damping) should be used in the design, backfit and margin assessment of nuclear plants. (orig./HP)

  2. Damping modification factors for acceleration response spectra

    Directory of Open Access Journals (Sweden)

    Heng Li


    Full Text Available DMF (Damping modification factors are used to modify elastic response spectral values corresponding to damping ratio 5% to other damping levels. The influence of seismological parameters (magnitude, epicentral distances and site conditions on DMF for acceleration spectra was analysed. The results show that for a given period as the magnitude or distance increase, the effect of damping on the seismic response will also increase, which indicates the response reduction from the structural damping will become more efficient. In the near-field of small earthquakes, the influence of site conditions on DMF is obvious, but it does not show a consistent rule. Furthermore, the DMF corresponding to different site conditions gradually close to unity with increasing magnitude and distance. The influence of the above mentioned parameters is related to the relative attenuation of the frequency components of the ground motion. The attenuation index alone is sufficient to take into account the influence. Based on these features, this paper proposes a formula of DMF for acceleration response spectra.

  3. Macroscopic damping model for structural dynamics with random polycrystalline configurations (United States)

    Yang, Yantao; Cui, Junzhi; Yu, Yifan; Xiang, Meizhen


    In this paper the macroscopic damping model for dynamical behavior of the structures with random polycrystalline configurations at micro-nano scales is established. First, the global motion equation of a crystal is decomposed into a set of motion equations with independent single degree of freedom (SDOF) along normal discrete modes, and then damping behavior is introduced into each SDOF motion. Through the interpolation of discrete modes, the continuous representation of damping effects for the crystal is obtained. Second, from energy conservation law the expression of the damping coefficient is derived, and the approximate formula of damping coefficient is given. Next, the continuous damping coefficient for polycrystalline cluster is expressed, the continuous dynamical equation with damping term is obtained, and then the concrete damping coefficients for a polycrystalline Cu sample are shown. Finally, by using statistical two-scale homogenization method, the macroscopic homogenized dynamical equation containing damping term for the structures with random polycrystalline configurations at micro-nano scales is set up.

  4. [Are we all on the same temporal page? The moderating effects of temporal team cognition on the polychronicity diversity–team performance relationship]. (United States)

    Mohammed, Susan; Nadkarni, Sucheta


    Integrating research on polychronicity, team diversity, and team cognition, we hypothesized that shared temporal cognition (overlapping knowledge) and temporal transactive memory systems (differentiated knowledge) would moderate the effects of polychronicity diversity on team performance. Results from 71 teams in an Indian organization revealed opposing moderating effects in that shared temporal cognition attenuated, but temporal transactive memory systems amplified, the negative effects of polychronicity diversity on team performance. Shared temporal cognition also exerted a strong, positive effect on team performance. Study results provide support for the continued examination of polychronicity diversity and temporal team cognition. (c) 2014 APA, all rights reserved.

  5. Wind turbine blade with viscoelastic damping (United States)

    Sievers, Ryan A.; Mullings, Justin L.


    A wind turbine blade (60) damped by viscoelastic material (54, 54A-F) sandwiched between stiffer load-bearing sublayers (52A, 52B, 56A, 56B) in portions of the blade effective to damp oscillations (38) of the blade. The viscoelastic material may be located in one or more of: a forward portion (54A) of the shell, an aft portion (54D) of the shell, pressure and suction side end caps (54B) of an internal spar, internal webbing walls (54C, 54E), and a trailing edge core (54F).

  6. Effects of Rayleigh damping, friction and rate-dependency on 3D residual stress simulation of angled shot peening

    International Nuclear Information System (INIS)

    Kim, Taehyung; Lee, Hyungyil; Hyun, Hong Chul; Jung, Sunghwan


    Highlights: ► We propose a 3D FE model to study peening residual stress involving angled shots. ► The FE model set with plastic shot are found to best match the X-ray diffraction data. ► The model provides 3D multi-shot impact FE solution with various incidence angles. - Abstract: In this study, we propose a 3D finite element (FE) model to study shot peening involving angled shots. Using the FE model for angled shot peening, we examine relationships with the residual stress introduced by shot peening of the factors such as the Rayleigh damping in the material, dynamic friction, and the rate dependency of the material and systematically integrate them with the FE model. The FE model is set with rigid shot, elastic shot, and plastic shot respectively. Plastic deformation of the shot is also explored with the FE model. The FE model is applied to study angled multi-shots. The FE results are verified with experimental data using X-ray diffraction (XRD). The FE model set with plastic shot are found to best match the XRD results validating accuracy of the 3D FE model properly integrated with the factors and plastically deformable shot ball. The proposed model will serve to simulate actual shot peening cases, which generally involve multi-shots with various incidence angles

  7. Equivalent viscous damping procedure for multi-material systems

    International Nuclear Information System (INIS)

    Ahmed, H.; Ma, D.


    The inclusion of accurate viscous damping effects in the seismic analysis of nuclear power plants is discussed. A procedure to evaluate and use equivalent viscous damping coefficients in conjunction with the substructure method of finite element analysis is outlined in detail

  8. TX-Kw: An Effective Temporal XML Keyword Search


    Rasha Bin-Thalab; Neamat El-Tazi; Mohamed E.El-Sharkawi


    Inspired by the great success of information retrieval (IR) style keyword search on the web, keyword search on XML has emerged recently. Existing methods cannot resolve challenges addressed by using keyword search in Temporal XML documents. We propose a way to evaluate temporal keyword search queries over Temporal XML documents. Moreover, we propose a new ranking method based on the time-aware IR ranking methods to rank temporal keyword search queries results. Extensive experiments have been ...

  9. Effect of atomic vibrations in XANES: polarization-dependent damping of the fine structure at the Cu K-edge of (creat)2CuCl4. (United States)

    Šipr, Ondřej; Vackář, Jiří; Kuzmin, Alexei


    Polarization-dependent damping of the fine structure in the Cu K-edge spectrum of creatinium tetrachlorocuprate [(creat) 2 CuCl 4 ] in the X-ray absorption near-edge structure (XANES) region is shown to be due to atomic vibrations. These vibrations can be separated into two groups, depending on whether the respective atoms belong to the same molecular block; individual molecular blocks can be treated as semi-rigid entities while the mutual positions of these blocks are subject to large mean relative displacements. The effect of vibrations can be efficiently included in XANES calculations by using the same formula as for static systems but with a modified free-electron propagator which accounts for fluctuations in interatomic distances.

  10. The Duffing oscillator with damping

    DEFF Research Database (Denmark)

    Johannessen, Kim


    An analytical solution to the differential equation describing the Duffing oscillator with damping is presented. The damping term of the differential equation and the initial conditions satisfy an algebraic equation, and thus the solution is specific for this type of damping. The nonlinear term....... It is established that the period of oscillation is shorter compared to that of a linearized model but increasing with time and asymptotically approaching the period of oscillation of the linear damped model. An explicit expression for the period of oscillation has been derived, and it is found to be very accurate....

  11. Spatial Damping of Linear Compressional Magnetoacoustic Waves ...

    Indian Academy of Sciences (India)

    by considering the effect of prominence-corona transition region (PCTR) and neglect- ing the adiabaticity. Terradas et al. (2005) investigated the damping of MHD waves in an inhomogeneous and bounded medium by neglecting the adiabaticity. They found out that only slow mode waves are affected leaving fast mode ...

  12. An Equivalent Circuit for Landau Damping

    DEFF Research Database (Denmark)

    Pécseli, Hans


    An equivalent circuit simulating the effect of Landau damping in a stable plasma‐loaded parallel‐plate capacitor is presented. The circuit contains a double infinity of LC components. The transition from stable to unstable plasmas is simulated by the introduction of active elements into the circuit....

  13. Fast damping in mismatched high intensity beam transportation

    Directory of Open Access Journals (Sweden)

    V. Variale


    Full Text Available A very fast damping of beam envelope oscillation amplitudes was recently observed in simulations of high intensity beam transport, through periodic FODO cells, in mismatched conditions [V. Variale, Nuovo Cimento Soc. Ital. Fis. 112A, 1571–1582 (1999 and T. Clauser et al., in Proceedings of the Particle Accelerator Conference, New York, 1999 (IEEE, Piscataway, NJ, 1999, p. 1779]. A Landau damping mechanism was proposed at the origin of observed effect. In this paper, to further investigate the source of this fast damping, extensive simulations have been carried out. The results presented here support the interpretation of the mechanism at the origin of the fast damping as a Landau damping effect.

  14. Spatio-temporal effects of low impact development practices (United States)

    Gilroy, Kristin L.; McCuen, Richard H.


    SummaryThe increase in land development and urbanization experienced in the US and worldwide is causing environmental degradation. Traditional off-site stormwater management does not protect small streams. To mitigate the negative effects of land development, best management practices (BMPs) are being implemented into stormwater management policies for the purposes of controlling minor flooding and improving water quality. Unfortunately, the effectiveness of BMPs has not been extensively studied. The purpose of this research was to analyze the effects of both location and quantity of two types of BMPs: cisterns and bioretention pits. A spatio-temporal model of a microwatershed was developed to determine the effects of BMPs on single-family, townhome, and commercial lots. The effects of development and the BMPs on peak runoff rates and volumes were compared to pre-development conditions. The results show that cisterns alone are capable of controlling rooftop runoff for small storms. Both the spatial location and the volume of BMP storage on a microwatershed influences the effectiveness of BMPs. The volume of BMP storage is positively correlated to the percent reduction in the peak discharge rate and total runoff volume; however, location is a factor in the peak reduction and a maximum volume of effective storage for both hydrologic metrics does exist. These results provide guidelines for developing stormwater management policies that can potentially reduce pollution of first-order streams, lower the cost and maintenance requirements, enhance aesthetics, and increase safety.

  15. Persistent Motor Deficits in DAMP


    J Gordon Millichap


    Motor control in ability to perform everyday and spare-time activities was assessed at 11 to 12 years of age in 10 boys with deficits in attention, motor control and perception (DAMP) and compared with a group of 20 boys without DAMP.

  16. On acoustic damping of a cylindrical chamber in resonant modes (United States)

    Shimizu, Taro; Hori, Dan; Yoshida, Seiji; Tachibana, Shigeru; Matsuyama, Shingo; Shinjo, Junji; Mizobuchi, Yasuhiro; Kobayashi, Kan


    Acoustic damping of a cylindrical chamber with open and closed ends in resonant modes is analytically and numerically investigated to understand the low damping characteristic of the chamber without chocked nozzle. First, on the basis of the analytic solution of resonant acoustic modes inside a cylinder, the damping by radiation from the open end is calculated analytically using simple acoustic source modeling for velocity fluctuation. The effect of viscosity is also considered as an attenuation mechanism. The values of acoustic damping calculated for the first longitudinal and tangential modes are in good agreement with the corresponding values obtained using numerical simulation. The damping is also investigated for a configuration of the chamber with an injector installed off-center. Finally, we numerically and semi-analytically investigate the acoustic damping for a configuration that includes a hot-gas injection. The obtained mode is found to be a spinning tangential mode and the radiated wave also has a spinning feature. The damping for the spinning tangential mode is found to be larger than that for the symmetric dipole-like radiation under a uniform standing condition, but much smaller than the chamber with a chocked nozzle. Therefore, the chamber with an open end has the low damping characteristic suitable for intentionally generating oscillatory combustion.

  17. Large space structure damping design (United States)

    Pilkey, W. D.; Haviland, J. K.


    Several FORTRAN subroutines and programs were developed which compute complex eigenvalues of a damped system using different approaches, and which rescale mode shapes to unit generalized mass and make rigid bodies orthogonal to each other. An analytical proof of a Minimum Constrained Frequency Criterion (MCFC) for a single damper is presented. A method to minimize the effect of control spill-over for large space structures is proposed. The characteristic equation of an undamped system with a generalized control law is derived using reanalysis theory. This equation can be implemented in computer programs for efficient eigenvalue analysis or control quasi synthesis. Methods to control vibrations in large space structure are reviewed and analyzed. The resulting prototype, using electromagnetic actuator, is described.

  18. Damping of liquid sloshing by foams (United States)

    Sauret, A.; Boulogne, F.; Cappello, J.; Dressaire, E.; Stone, H. A.


    When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on sloshing of a liquid foam placed on top of a liquid bath. We generate a monodisperse two-dimensional liquid foam in a rectangular container and track the motion of the foam. The influence of the foam on the sloshing dynamics is experimentally characterized: only a few layers of bubbles are sufficient to significantly damp the oscillations. We rationalize our experimental findings with a model that describes the foam contribution to the damping coefficient through viscous dissipation on the walls of the container. Then we extend our study to confined three-dimensional liquid foam and observe that the behavior of 2D and confined 3D systems are very similar. Thus, we conclude that only the bubbles close to the walls have a significant impact on the dissipation of energy. The possibility to damp liquid sloshing using foam is promising in numerous industrial applications such as the transport of liquefied gas in tankers or for propellants in rocket engines.

  19. Chiral damping of magnetic domain walls

    KAUST Repository

    Jué, Emilie


    Structural symmetry breaking in magnetic materials is responsible for the existence of multiferroics1, current-induced spin–orbit torques2, 3, 4, 5, 6, 7 and some topological magnetic structures8, 9, 10, 11, 12. In this Letter we report that the structural inversion asymmetry (SIA) gives rise to a chiral damping mechanism, which is evidenced by measuring the field-driven domain-wall (DW) motion in perpendicularly magnetized asymmetric Pt/Co/Pt trilayers. The DW dynamics associated with the chiral damping and those with Dzyaloshinskii–Moriya interaction (DMI) exhibit identical spatial symmetry13, 14, 15, 16, 17, 18, 19. However, both scenarios are differentiated by their time reversal properties: whereas DMI is a conservative effect that can be modelled by an effective field, the chiral damping is purely dissipative and has no influence on the equilibrium magnetic texture. When the DW motion is modulated by an in-plane magnetic field, it reveals the structure of the internal fields experienced by the DWs, allowing one to distinguish the physical mechanism. The chiral damping enriches the spectrum of physical phenomena engendered by the SIA, and is essential for conceiving DW and skyrmion devices owing to its coexistence with DMI (ref. 20).

  20. Effect of temporal resolution on the accuracy of ADCP measurements (United States)

    Gonzalez-Castro, J. A.; Oberg, K.; Duncker, J.J.


    The application of acoustic Doppler current profilers (ADCP's) in river flow measurements is promoting a great deal of progress in hydrometry. ADCP's not only require shorter times to collect data than traditional current meters, but also allow streamflow measurements at sites where the use of conventional meters is either very expensive, unsafe, or simply not possible. Moreover, ADCP's seem to offer a means for collecting flow data with spatial and temporal resolutions that cannot be achieved with traditional current-meters. High-resolution data is essential to characterize the mean flow and turbulence structure of streams, which can in turn lead to a better understanding of the hydrodynamic and transport processes in rivers. However, to properly characterize the mean flow and turbulence intensities of stationary flows in natural turbulent boundary layers, velocities need to be sampled over a long-enough time span. The question then arises, how long should velocities be sampled in the flow field to achieve an adequate temporal resolution? Theoretically, since velocities cannot be sampled over an infinitely long time interval, the error due to finite integration time must be considered. This error can be estimated using the integral time scale. The integral time scale is not only a measure of the time interval over which a fluctuating function is correlated with itself but also a measure of the time span over which the function is dependent on itself. This time scale, however, is not a constant but varies spatially in the flow field. In this paper we present an analysis of the effect of the temporal resolution (sampling time span) on the accuracy of ADCP measurements based on the integral time scale. Single ping velocity profiles collected with frequencies of 1 Hz in the Chicago River at Columbus Drive using an uplooking 600 kHz ADCP are used in this analysis. The integral time scale at different depths is estimated based on the autocorrelation function of the

  1. Some Effects of Varying the Damping in Pitch and Roll on the Flying Qualities of a Small Single-Rotor Helicopter

    National Research Council Canada - National Science Library

    Reeder, John


    ... to nearly three times that amount. Longitudinal stability and control characteristics which were unsatisfactory with the device inoperative were improved by increasing the damping of the helicopter and were judged as satisfactory...

  2. Developing effective automated feedback in temporal bone surgery simulation. (United States)

    Wijewickrema, Sudanthi; Piromchai, Patorn; Zhou, Yun; Ioannou, Ioanna; Bailey, James; Kennedy, Gregor; O'Leary, Stephen


    We aim to test the effectiveness, accuracy, and usefulness of an automated feedback system in facilitating skill acquisition in virtual reality surgery. We evaluate the performance of the feedback system through a randomized controlled trial of 24 students allocated to feedback and nonfeedback groups. The feedback system was based on the Melbourne University temporal bone surgery simulator. The study was conducted at the simulation laboratory of the Royal Victorian Eye and Ear Hospital, Melbourne. The study participants were medical students from the University of Melbourne, who were asked to perform virtual cortical mastoidectomy on the simulator. The extent to which the drilling behavior of the feedback and nonfeedback groups differed was used to evaluate the effectiveness of the system. Its accuracy was determined through a postexperiment observational assessment of recordings made during the experiment by an expert surgeon. Its usability was evaluated using students' self-reports of their impressions of the system. A Friedman's test showed that there was a significant improvement in the drilling performance of the feedback group, χ(2)(1) = 14.450, P feedback (when trainee behavior was detected) 88.6% of the time and appropriate feedback (accurate advice) 84.2% of the time. Participants' opinions about the usefulness of the system were highly positive. The automated feedback system was observed to be effective in improving surgical technique, and the provided feedback was found to be accurate and useful. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

  3. Damping layout optimization for ship's cabin noise reduction based on statistical energy analysis

    Directory of Open Access Journals (Sweden)

    WU Weiguo


    Full Text Available An optimization analysis study concerning the damping control of ship's cabin noise was carried out in order to improve the effect and reduce the weight of damping. Based on the Statistical Energy Analysis (SEA method, a theoretical deduction and numerical analysis of the first-order sensitivity analysis of the A-weighted sound pressure level concerning the damping loss factor of the subsystem were carried out. On this basis, a mathematical optimization model was proposed and an optimization program developed. Next, the secondary development of VA One software was implemented through the use of MATLAB, while the cabin noise damping control layout optimization system was established. Finally, the optimization model of the ship was constructed and numerical experiments of damping control optimization conducted. The damping installation region was divided into five parts with different damping thicknesses. The total weight of damping was set as an objective function and the A-weighted sound pressure level of the target cabin was set as a constraint condition. The best damping thickness was obtained through the optimization program, and the total damping weight was reduced by 60.4%. The results show that the damping noise reduction effect of unit weight is significantly improved through the optimization method. This research successfully solves the installation position and thickness selection problems in the acoustic design of damping control, providing a reliable analysis method and guidance for the design.

  4. Modal damping estimates of MOS-1 solar array paddle (United States)

    Fujimori, Yoshinori; Kato, Junichi; Toda, Susumu

    The modal damping coefficients of MOS-1 solar array paddle have been estimated, based on experimental results of the paddle substrate—a prime load carrying component of the paddle structure—and on theoretical extrapolation. The damping coefficient values of 1st, 2nd, 3rd and 4th substrate modes are 0.69% (14.5 Hz), 0.07% (49.7 Hz), 0.27% (61.2 Hz) and 0.07% (96.7 Hz) respectively. Also this substrate experiment reveals that the effect of the air vanishes at the level of 0.01 Torr and that the relative alignment of fibers in CFRP skin vs the lines of principal stresses in the deformed state is strongly correlated with the damping level. Zener theory of thermo-elasticity coupling model has been applied to derive the damping coefficients of the plate. Then the modal damping coefficients of MOS-1 solar array paddle whose resonances lie in the range of 0.2-2 Hz are estimated by making use of the fitted curves to the experimental data. Next, the estimate is improved by considering the additional contribution from the solar cells and adhesive. Supplementing the foregoing estimates, quantitative assessment on the damping effect due to interface friction somewhere in the structure is made leading to the final estimate that the modal damping coefficients of MOS-1 solar array paddle would not be lower than 0.003.

  5. Effect of temporal distribution of dose on oncogenic transformation

    International Nuclear Information System (INIS)

    Miller, R.C.; Brenner, D.J.; Geard, C.R.; Marino, S.A.; Hall, E.J.


    Risk estimates for neutron hazards are of considerable social and economic importance. Effectiveness per unit dose of X or γ rays (low-LET radiations) has been consistently observed to be dependent on the temporal distribution of dose. In a series of comparisons, 0.5 Gy of single or fractionated (five fractions in 8 h), neutrons of 0.23, 0.35, 0.45, 5.9, or 13.7 MeV were delivered to a synchronous C3H 10T1/2 cells. Transformation frequencies per surviving cell are shown. Cells exposed to one energy (5.9 MeV) show a significant enhancement at the 95% level due to fractionated exposures, and at the 85% confidence level the 0.35- and 0.45-MeV fractionated exposures additionally result in significantly greater transformation frequencies. The frequencies of surviving cells per dish between a single or fractionated exposure vary by less than 10%. In three of five pairwise comparisons, fractionated exposures result in statistically greater frequencies of transformants per dish, and are in complete agreement with the results when induction is expressed as transformants per surviving cell. However, after 0.23-MeV neutron irradiation, the single dose resulted in a greater incidence of transformed foci than the fractionated dose

  6. Temporal evolution of stimulated Brillouin backscatter

    International Nuclear Information System (INIS)

    Hinkel, D.E.; Williams, E.A.; Berger, R.L.


    A qualitative understanding of the time dependence of stimulated Brillouin scattering (SBS) provides estimates of the amount of temporal growth that occurs in current inertial confinement fusion and short laser pulse interaction experiments when the growth is limited by the length of the experiment or by motion of the ''hot spots'' of the laser intensity pattern induced by beam smoothing. In the weak coupling limit, the instantaneous growth rate depends upon the plasma initial conditions early in time, is proportional to t -1/2 later in time, and asymptotically approaches the absolute growth rate (in the absence of damping). When the instability is strongly coupled, the growth rate depends upon the plasma initial conditions early in time but is proportional to t -1/3 later in time. When the growth rate drops to a value comparable to that of the ion acoustic frequency, the instability becomes effectively weakly coupled. The effects of damping are also discussed

  7. Emittance damping considerations for TESLA

    International Nuclear Information System (INIS)

    Floettmann, K.; Rossbach, J.


    Two schemes are considered to avoid very large damping rings for TESLA. The first (by K.F.) makes use of the linac tunnel to accomodate most of the damping 'ring' structure, which is, in fact, not a ring any more but a long linear structure with two small bends at each of its ends ('dog-bone'). The other scheme (by J.R.) is based on a positron (or electron, respectively) recycling scheme. It makes use of the specific TESLA property, that the full bunch train is much longer (240 km) than the linac length. The spent beams are recycled seven times after interaction, thus reducing the number of bunches to be stored in the damping ring by a factor of eight. Ultimately, this scheme can be used to operate TESLA in a storage ring mode ('storage linac'), with no damping ring at all. Finally, a combination of both schemes is considered. (orig.)

  8. Travelling Solitons in the Damped Driven Nonlinear Schroedinger Equation

    CERN Document Server

    Barashenkov, I V


    The well-known effect of the linear damping on the moving nonlinear Schrodinger soliton (even when there is energy supply via the spatially homogeneous driving) is to quench its momentum to zero. Surprisingly, the zero momentum does not necessarily mean zero velocity. We show that two or more parametrically driven damped solitons can form a complex travelling with zero momentum at a nonzero constant speed. All travelling complexes we have found so far, turned out to be unstable. Thus, the parametric driving is capable of sustaining the uniform motion of damped solitons, but some additional agent is required to make this motion stable.

  9. Nonlinear roll damping of a barge with and without liquid cargo in spherical tanks

    Directory of Open Access Journals (Sweden)

    Wenhua Zhao


    Full Text Available Damping plays a significant role on the maximum amplitude of a vessel's roll motion, in particular near the resonant frequency. It is a common practice to predict roll damping using a linear radiation–diffraction code and add that to a linearized viscous damping component, which can be obtained through empirical, semi-empirical equations or free decay tests in calm water. However, it is evident that the viscous roll damping is nonlinear with roll velocity and amplitude. Nonlinear liquid cargo motions inside cargo tanks also contribute to roll damping, which when ignored impedes the accurate prediction of maximum roll motions. In this study, a series of free decay model tests is conducted on a barge-like vessel with two spherical tanks, which allows a better understanding of the nonlinear roll damping components considering the effects of the liquid cargo motion. To examine the effects of the cargo motion on the damping levels, a nonlinear model is adopted to calculate the damping coefficients. The liquid cargo motion is observed to affect both the linear and the quadratic components of the roll damping. The flow memory effect on the roll damping is also studied. The nonlinear damping coefficients of the vessel with liquid cargo motions in spherical tanks are obtained, which are expected to contribute in configurations involving spherical tanks.

  10. Effects of Temporal Modulation on Crowding, Visual Span, and Reading. (United States)

    Haberthy, Caroline; Yu, Deyue


    Crowding, the increased difficulty in recognizing a target due to the proximity of adjacent objects, is identified as the main sensory constraint for the size of the visual span (the number of letters recognized without moving the eyes) and reading speed in peripheral vision. The goal of the present study is to assess the impact of temporal modulation on crowding, visual span, and reading in the periphery. Six normally sighted young adults participated in the study. Four temporal modulation patterns were examined: (1) moving scotoma (sequentially masking the component letters in a letter string or word), (2) moving window (sequentially presenting the component letters), (3) flashing (repeatedly masking and presenting all letters simultaneously), and (4) static (the control condition; no temporal changes during the presentation). For each condition, we obtained the spatial extent of crowding, the size of the visual span, and reading speeds measured by the rapid serial visual presentation method. Compared with the static condition, the spatial extent of crowding was reduced in the moving window condition. Both the moving window and moving scotoma conditions led to a faster reading speed for print sizes smaller than critical print size (the smallest print size that allows maximum reading speed). However, none of the temporal modulations increased the size of the visual span and reading speed for print sizes larger than critical print size. The results suggest that the temporal modulation patterns are of limited benefit for peripheral reading despite the substantial improvement for slow reading when print size is close to acuity threshold.

  11. Cost effective use of audiograms after pediatric temporal bone fractures. (United States)

    Frisenda, Julia L; Schroeder, James W; Ryan, Maura E; Valika, Taher S; Billings, Kathleen R


    To identify the relationship of pediatric temporal fractures to the incidence and type of hearing loss present. To analyze the timing and utility of audiometric testing in children with temporal bone fractures. Retrospective case series of 50 pediatric patients with temporal bone fractures who were treated at an urban, tertiary care children's hospital from 2008 to 2014. A statistical analysis of predictors of hearing loss after temporal bone fracture was performed. Fifty-three fractures (69.7%) in 50 patients involved the petrous portion of the temporal bone. The mean age of patients was 7.13 years, and 39 (73.6%) were male. A fall was the most common mechanism of injury in 28 (52.8%) patients, followed by crush injury (n=14, 26.2%), and vehicular trauma (n=10, 18.9%). All otic capsule violating fractures were associated with a sensorineural hearing loss (n=4, 7.5%, p=0.002). Three of four otic capsule sparing fractures were associated with ossicular dislocation, with a corresponding mixed or conductive hearing loss on follow up audiometric testing. The majority of otic capsule sparing fracture patients (n=19/43, 44.2%) who had follow up audiograms had normal hearing, and those with otic capsule violating fractures were statistically more likely to have persistent hearing loss than those with otic capsule sparing fractures (p=0.01). Patients with otic capsule violating fractures or those with ossicular disruption are at higher risk for persistent hearing loss. Cost-saving may be accrued by selecting only those patients at high risk for persistent hearing loss for audiometric testing after temporal bone fractures. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  12. Frequency Dependence of Damping and Compliance in Loudspeaker Suspensions

    DEFF Research Database (Denmark)

    Thorborg, Knud; Tinggaard, Carsten; Agerkvist, Finn T.


    ]. It is an empirical model mathematically describing the effects of visco-elasticity in loudspeaker suspensions. The evaluation is to a high degree based on test loudspeakers with rubber surrounds with a high content of plasticizer combining high compliance and high damping. This is very effective to reduce rim...... resonances, but less used in high quality loudspeakers today – where “Low Loss Rubber Surround” is currently seen as a marketing feature, as it is expected to have positive impact on sound quality. The plasticized type of surround shows significant creep, followed by compliance and damping increasing towards...... - with the additives normally used to adjust stiffness and damping - neither frequency dependency of compliance nor creep are significant problems. Despite this, experience shows that frequency dependent mechanical damping nevertheless might be present. In this paper some modifications to the LOG-model are proposed...


    Directory of Open Access Journals (Sweden)



    Full Text Available The IEEE bench mark model 2 series compensated system is considered for analysis. It consists of single machine supplying power to infinite bus through two parallel lines one of which is series compensated. The mechanical system considered consists of six mass, viz, high pressure turbine, intermediate pressure turbine, two low pressure turbines, generator and an exciter. The excitation system considered is IEEE type 1 with saturation. The auxiliary controls considered to damp the unstable subsynchronous modes of oscillations are Power System Stabilizer (PSS and Static var Compensator (SVC. The different cases of power system stabilizer and reactive power controls are adapted to study the effectiveness of damping these unstable subsynchronous modes of oscillations.

  14. Enthalpy damping for the steady Euler equations (United States)

    Jespersen, D. C.


    For inviscid steady flow problems where the enthalpy is constant at steady state, it was previously proposed to use the difference between the local enthalpy and the steady state enthalpy as a driving term to accelerate convergence of iterative schemes. This idea is analyzed, both on the level of the partial differential equation and on the level of a particular finite difference scheme. It is shown that for the two-dimensional unsteady Euler equations, a hyperbolic system with eigenvalues on the imaginary axis, there is no enthalpy damping strategy which moves all the eigenvalues into the open left half plane. For the numerical scheme, however, the analysis shows and examples verify that enthalpy damping is potentially effective in accelerating convergence to steady state.

  15. Relativity damps OPEP in nuclear matter

    International Nuclear Information System (INIS)

    Banerjee, M.K.


    Using a relativistic Dirac-Brueckner analysis the OPEP contribution to the ground state energy of nuclear matter is studied. In the study the pion is derivative-coupled. The author finds that the role of the tensor force in the saturation mechanism is substantially reduced compared to its dominant role in a usual nonrelativistic treatment. He shows that the damping of derivative-coupled OPEP is actually due to the decrease of M * /M with increasing density. He points out that if derivative-coupled OPEP is the preferred form of nuclear effective lagrangian nonrelativistic treatment of nuclear matter is in trouble. Lacking the notion of M * it cannot replicate the damping. He suggests an examination of the feasibility of using pseudoscalar coupled πN interaction before reaching a final conclusion about nonrelativistic treatment of nuclear matter

  16. Passive Damping in Stiffened Structures Using Viscoelastic Polymers


    Ahmad, Naveed


    Noise and vibration suppression is an important aspect in the design process of structures and machines. Undesirable vibrations can cause fatigue in a structure and are, therefore, a risk to the safety of a structure. One of the most effective and widely used methods of mitigating these unwanted vibrations from a system is passive damping, by using a viscoelastic material. This dissertation will primarily focus on constrained layer passive damping treatments in structures and the investigatio...

  17. Effects of dynamic-range compression on temporal acuity

    DEFF Research Database (Denmark)

    Wiinberg, Alan; Jepsen, Morten Løve; Epp, Bastian


    processing, temporal modulation transfer functions (TMTFs) and “supra-threshold” modulation-depth discrimination (MDD) thresholds were obtained in normal-hearing (NH) and hearing-impaired (HI) listeners with and without wide-dynamic range compression (WDRC). The TMTFs were obtained using tonal carriers of 1...

  18. Serial Position Effects in Young Children: Temporal or Spatial? (United States)

    Brown, R. Michael; And Others


    Three experiments examined the notion that children's primacy and recency in the probe-type pictorial memory task are related to the spatial distinctiveness of the "leftmost" and "rightmost" items presented. Data suggest that preschoolers and older children alike are able to code temporal order along with the corresponding…

  19. An inertial parameter identification method of eliminating system damping effect for a six-degree-of-freedom parallel manipulator

    Directory of Open Access Journals (Sweden)

    Tian Tixian


    Full Text Available A new simple and effective inertial parameter identification method based on sinusoidal vibrations of a six-degree-of-freedom parallel manipulator is proposed. Compared with previously known identification algorithms, the advantages of the new approach are there is no need to design the excitation trajectory to consider the condition number of the observation matrix and the inertial matrix can be accurately defined regardless of the effect of viscous friction. In addition, the use of a sinusoidal exciting trajectory allows calculation of the velocities and accelerations from the measured position response. Simulations show that the new approach has acceptable tolerance of dry friction when using a simple coupling parameter modified formula. The experimental application to the hydraulically driven Stewart platform demonstrates the capability and efficiency of the proposed identification method.

  20. Effective and efficient analysis of spatio-temporal data (United States)

    Zhang, Zhongnan

    Spatio-temporal data mining, i.e., mining knowledge from large amount of spatio-temporal data, is a highly demanding field because huge amounts of spatio-temporal data have been collected in various applications, ranging from remote sensing, to geographical information systems (GIS), computer cartography, environmental assessment and planning, etc. The collection data far exceeded human's ability to analyze which make it crucial to develop analysis tools. Recent studies on data mining have extended to the scope of data mining from relational and transactional datasets to spatial and temporal datasets. Among the various forms of spatio-temporal data, remote sensing images play an important role, due to the growing wide-spreading of outer space satellites. In this dissertation, we proposed two approaches to analyze the remote sensing data. The first one is about applying association rules mining onto images processing. Each image was divided into a number of image blocks. We built a spatial relationship for these blocks during the dividing process. This made a large number of images into a spatio-temporal dataset since each image was shot in time-series. The second one implemented co-occurrence patterns discovery from these images. The generated patterns represent subsets of spatial features that are located together in space and time. A weather analysis is composed of individual analysis of several meteorological variables. These variables include temperature, pressure, dew point, wind, clouds, visibility and so on. Local-scale models provide detailed analysis and forecasts of meteorological phenomena ranging from a few kilometers to about 100 kilometers in size. When some of above meteorological variables have some special change tendency, some kind of severe weather will happen in most cases. Using the discovery of association rules, we found that some special meteorological variables' changing has tight relation with some severe weather situation that will happen

  1. [Analgesic Effect ofDeqiInduced by Needling at Sanyinjiao (SP 6) Acupoint on Primary Dysmenorrheal Patients with Cold Damp Stagnation Syndrome]. (United States)

    Wang, Pei; Zhang, Peng; Wu, Gui-Wen; Hu, Shang-Qing; Li, Jing; Sun, Jun-Jun; Wang, Ya-Feng; Zhao, Min-Yi; Hu, Ni-Juan; Zhu, Jiang


    To observe the analgesic effect of deqi induced by needling at Sanyinjiao (SP 6) on primary dysmenorrheal (PD) patients with cold damp stagnation syndrome (CDSS). A total of 64 PD patients with CDSS experiencing abdominal pain (≥40 mm in visual analogue scale ,VAS) were randomly assigned into deqi -expectation(DE) group( n =15) and no- deqi -expectation(NDE) group( n =49). On the first day of abdominal pain attack, bilateral SP 6 were punctured respectively with thicker needles with deeper insertion for deqi -expectation patients and thin filiform needles with shallow insertion for no- deqi -expectation patients. The needles were removed after 30 minutes, a deqi scale was used to evaluate the deqi condition. According to the results, patients in the DE group were further divided into deqi DE group and no- deqi DE group, patients in the NDE group were also divided into deqi NDE group and no- deqi NDE group. The VAS was used to evaluate the patients' abdominal pain severity before treatment and 0, 10, 20, 30 min after acupuncture needle withdrawal. The rate of deqi in the DE group was higher than that in the NDE group( P <0.05). The VAS scores of abdominal pain in the four groups were decreased at all time-points after needle withdrawal compared with those before treatment ( P <0.01), while the VAS score in the deqi DE group were lower than in the no- deqi NDE group 30 min after needle withdrawal ( P <0.05). The intervention method of thick needle, deep insertion and some manipulation is easier in inducing deqi than that of thin needle, shallow insertion and no manipulation. The analgesic effect of deqi is better than that of no- deqi for PD patients with CDSS.

  2. The improved damping of superconductor bearings for 35 kWh superconductor flywheel energy storage system

    International Nuclear Information System (INIS)

    Han, Y.H.; Park, B.J.; Jung, S.Y.; Han, S.C.; Lee, W.R.; Bae, Y.C.


    Highlights: ► We made a 35 kWh superconductor flywheel energy storage system. ► The damping coefficient of the superconductor bearing was increased over 3000 N s/m. ► The source of damping was discussed. -- Abstract: A 35 kWh Superconductor Flywheel Energy Storage system (SFES) using hybrid bearing sets, which is composed of a high temperature superconductor (HTS) bearing and an active magnet damper (AMD), has been developed at KEPCO Research Institute (KEPRI). Damping is a source of energy loss but necessary for the stability of the flywheel system. We found that the damping of HTS bearings can be improved by thermal insulating bolts, which play a role of passive type external damper. To investigate the source of the increased damping, damping coefficients were measured with HTS bearings using insulating bolts made of three kinds of polymer materials. The damping coefficient was raised over 3000 N s/m in the case of PEEK bolts. The value was almost a quarter of the AMD. In this study, thermoelastic and Coulomb friction damping mechanisms are discussed. The main damping mechanism was the thermoelastic damping of the bolts themselves. And interfacial gap between the insulating bolt and metal chamber, which increased during the cooling process, was considered to be the cause of the anisotropic damping coefficients. Finally, the effects of the HTS bearings on the first critical speed are shown

  3. The effects of gender, level of co-contraction, and initial angle on elbow extensor muscle stiffness and damping under a step increase in elbow flexion moment. (United States)

    Lee, Yunju; Ashton-Miller, James A


    Flexion buckling of an arm under the large ground reaction loads associated with arresting a fall to the ground increases the risk for head and thorax injuries. Yet, the factors that determine the arm buckling load remain poorly understood. We tested the hypothesis in 18 healthy young adults that neither gender, triceps co-contraction level (i.e., 25, 50, or 75% MVC) nor elbow angle would affect the rotational stiffness and damping resistance to step changes in elbow flexion loading. Data on the step response were gathered using optoelectronic markers (150 Hz) and myoelectric activity measurements (2 kHz), and an inverse dynamics analysis was used to estimate elbow extensor stiffness and damping coefficients. A repeated-measures analysis of variance showed that gender (p = 0.032), elbow flexion angle and co-contraction level (both p initial elbow flexion angle and maximum co-contraction, female stiffness and damping coefficients were 18 and 30% less, respectively, than male values after normalization by body height and weight. We conclude that the maximum extensor rotational stiffness and damping at the elbow is lower in women than in men of the same body size, and varies with triceps co-contraction level and initial elbow angle.

  4. Breathing pulses in the damped-soliton model for nerves (United States)

    Fongang Achu, G.; Moukam Kakmeni, F. M.; Dikande, A. M.


    Unlike the Hodgkin-Huxley picture in which the nerve impulse results from ion exchanges across the cell membrane through ion-gate channels, in the so-called soliton model the impulse is seen as an electromechanical process related to thermodynamical phenomena accompanying the generation of the action potential. In this work, account is taken of the effects of damping on the nerve impulse propagation, within the framework of the soliton model. Applying the reductive perturbation expansion on the resulting KdV-Burgers equation, a damped nonlinear Schrödinger equation is derived and shown to admit breathing-type solitary wave solutions. Under specific constraints, these breathing pulse solitons become self-trapped structures in which the damping is balanced by nonlinearity such that the pulse amplitude remains unchanged even in the presence of damping.

  5. Requirements for longitudinal HOM damping in superconducting recirculating linacs

    International Nuclear Information System (INIS)

    Bisognano, J.J.; Fripp, M.L.


    Transverse beam breakup provides the primary current limitation in the operation of superconducting recirculating linacs and requires the significant damping of transverse-deflecting higher order modes. The need to damp the coexisting longitudinal HOMs in these nominally isochronous machines, however, is not as clear. Isochronicity implies that energy variations induced by excitation of longitudinal modes do not translate directly into position and current modulations. Such modulations, if present, could enhance the initial excitation, effectively closing a potentially unstable feedback loop. Design optimization of cavity structures may suggest that no longitudinal damping be provided. On the other hand, easing of the isochronicity requirement may provide desired flexibility in lattice design. In this note, limits are placed on the requirements for longitudinal HOM damping and on the tolerances for isochronicity which are driven by possible longitudinal multipass phenomena. 2 refs., 1 fig

  6. Conscious and nonconscious memory effects are temporally dissociable. (United States)

    Slotnick, Scott D; Schacter, Daniel L


    Intentional (explicit) retrieval can reactivate sensory cortex, which is widely assumed to reflect conscious processing. In the present study, we used an explicit visual memory event-related potential paradigm to investigate whether such retrieval related sensory activity could be separated into conscious and nonconscious components. During study, abstract shapes were presented in the left or right visual field. During test, old and new shapes were presented centrally and participants classified each shape as "old-left", "old-right", or "new". Conscious activity was isolated by comparing accurate memory for shape and location (old-hits) with forgotten shapes (old-misses), and nonconscious activity was isolated by comparing old-left-misses with old-right-misses and vice versa. Conscious visual sensory activity had a late temporal onset (after 800 ms) while nonconscious visual sensory activity had an early temporal onset (before 800 ms). These results suggest explicit memory related sensory activity reflects both conscious and nonconscious processes that are temporally dissociable.

  7. Fractional delayed damped Mathieu equation (United States)

    Mesbahi, Afshin; Haeri, Mohammad; Nazari, Morad; Butcher, Eric A.


    This paper investigates the dynamical behaviour of the fractional delayed damped Mathieu equation. This system includes three different phenomena (fractional order, time delay, parametric resonance). The method of harmonic balance is employed to achieve approximate expressions for the transition curves in the parameter plane. The n = 0 and n = 1 transition curves (both lower and higher order approximations) are obtained. The dependencies of these curves on the system parameters and fractional orders are determined. Previous results for the transition curves reported for the damped Mathieu equation, delayed second-order oscillator, and fractional Mathieu equation are confirmed as special cases of the results for the current system.


    Directory of Open Access Journals (Sweden)

    Ladaev Nikolay Mikhaylovich


    Centrifugal grinders were used to analyze the grinding process. The experimental data have proven that the probability of destruction of damp samples is a lot higher than the one of dry samples, given the same initial dimensions of particles and the loading intensity. The rise in the probability of destruction is stipulated by the fact that that the grinder speed at which crushing is triggered is lower in case of damp samples than in case of dry ones. Expressions for speed that describes destruction initiation and the probability of destruction depending on the type of materials, the moisture content and the loading intensity have been derived.

  9. Damping Effects in Aerospace Structures (United States)


    crown and the side webs were cut away. A joint plate with two rivets in single shear restored the continuity of the crown across the cut. The beam... profonde du role a leur faire jouer dans les comnortements dynamiques d’ensesable. 11 s’agit 13 d’un point de vue qui apparaft aujourd’hui encore

  10. Landau damping of dust acoustic solitary waves in nonthermal plasmas (United States)

    Ghai, Yashika; Saini, N. S.; Eliasson, B.


    Dust acoustic (DA) solitary and shock structures have been investigated under the influence of Landau damping in a dusty plasma containing two temperature nonthermal ions. Motivated by the observations of Geotail spacecraft that reported two-temperature ion population in the Earth's magnetosphere, we have investigated the effect of resonant wave-particle interactions on DA nonlinear structures. The Korteweg-de Vries (KdV) equation with an additional Landau damping term is derived and its analytical solution is presented. The solution has the form of a soliton whose amplitude decreases with time. Further, we have illustrated the influence of Landau damping and nonthermality of the ions on DA shock structures by a numerical solution of the Landau damping modified KdV equation. The study of the time evolution of shock waves suggests that an initial shock-like pulse forms an oscillatory shock at later times due to the balance of nonlinearity, dispersion, and dissipation due to Landau damping. The findings of the present investigation may be useful in understanding the properties of nonlinear structures in the presence of Landau damping in dusty plasmas containing two temperature ions obeying nonthermal distribution such as in the Earth's magnetotail.

  11. Squeeze-Film Air Damping of a Five-Axis Electrostatic Bearing for Rotary Micromotors. (United States)

    Wang, Shunyue; Han, Fengtian; Sun, Boqian; Li, Haixia


    Air-film damping, which dominates over other losses, plays a significant role in the dynamic response of many micro-fabricated devices with a movable mass suspended by various bearing mechanisms. Modeling the damping characteristics accurately will be greatly helpful to the bearing design, control, and test in various micromotor devices. This paper presents the simulated and experimental squeeze-film air damping results of an electrostatic bearing for use in a rotary high-speed micromotor. It is shown that the boundary condition to solve the three-dimensional Reynolds equation, which governs the squeeze-film damping in the air gap between the rotor and its surrounding stator sealed in a three-layer evacuated cavity, behaves with strong cross-axis coupling characteristics. To accurately characterize the damping effect, a set of multiphysics finite-element simulations are performed by computing both the rotor velocity and the distribution of the viscous damping force acting on the rotor. The damping characteristics varying with several key structure parameters are simulated and discussed to optimize the device structure for desirable rotor dynamics. An electrical measurement method is also proposed and applied to validate the numerical results of the damping coefficients experimentally. Given that the frequency response of the electric bearing is critically dependent on the damping coefficients at atmospheric pressure, a solution to the air-film damping measurement problem is presented by taking approximate curve fitting of multi-axis experimental frequency responses. The measured squeeze-film damping coefficients for the five-axis electric bearing agrees well with the numerical solutions. This indicates that numerical multiphysics simulation is an effective method to accurately examine the air-film damping effect for complex device geometry and arbitrary boundary condition. The accurate damping coefficients obtained by FEM simulation will greatly simplify the design

  12. An experimental study on damping characteristics of mechanical snubber for nuclear power plant piping systems

    International Nuclear Information System (INIS)

    Chiba, T.; Kobayashi, H.; Kitamura, K.; Ando, K.; Koyanagi, R.


    The objectives of this study are 1) to clarify the damping characteristics and the dynamic stiffness of mechanical snubber, 2) to take the damping characteristics of mechanical snubber into the damping evaluation method obtained in SDREP. Therefore, following vibration tests were conducted. 1) Component test: As a first step, mechanical snubbers were excited with sinusoidal wave, and damping ratio and dynamic stiffness were measured at several loading levels. 2) Piping model test: Second, a 8'' diameter x 16 m length 3-dimensional piping model simulating the supporting conditions of actual piping systems was tested. Damping ratio and made shapes of piping model with mechanical snubbers were measured at several supporting conditions and response levels. From the results of these tests, the damping characteristics and the dynamic stiffness of mechanical snubber can be summarized as follows: 1) The damping effect of mechanical snubber is as strong as that of oil snubber. 2) Mechanical snubber contributes effectively to the damping of piping system, and it is indicated that the damping characteristics of mechanical snubber is applicable to the damping evaluation method obtained in SDREP. (orig./HP)

  13. Damping Ring R&D at CESR-TA

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, David L. [Cornell Univ., Ithaca, NY (United States). Dept. of Physics


    Accelerators that collide high energy beams of matter and anti-matter are essential tools for the investigation of the fundamental constituents of matter, and the search for new forms of matter and energy. A “Linear Collider” is a machine that would bring high energy and very compact bunches of electrons and positrons (anti-electrons) into head-on collision. Such a machine would produce (among many other things) the newly discovered Higgs particle, enabling a detailed study of its properties. Among the most critical and challenging components of a linear collider are the damping rings that produce the very compact and intense beams of electrons and positrons that are to be accelerated into collision. Hot dilute particle beams are injected into the damping rings, where they are compressed and cooled. The size of the positron beam must be reduced more than a thousand fold in the damping ring, and this compression must be accomplished in a fraction of a second. The cold compact beams are then extracted from the damping ring and accelerated into collision at high energy. The proposed International Linear Collider (ILC), would require damping rings that routinely produce such cold, compact and intense beams. The goal of the Cornell study was a credible design for the damping rings for the ILC. Among the technical challenges of the damping rings; the development of instrumentation that can measure the properties of the very small beams in a very narrow window of time, and mitigation of the forces that can destabilize the beams and prevent adequate cooling, or worse lead to beam loss. One of the most pernicious destabilizing forces is due to the formation of clouds of electrons in the beam pipe. The electron cloud effect is a phenomenon in particle accelerators in which a high density of low energy electrons, build up inside the vacuum chamber. At the outset of the study, it was anticipated that electron cloud effects would limit the intensity of the positron ring

  14. Vibration Damping Circuit Card Assembly (United States)

    Hunt, Ronald Allen (Inventor)


    A vibration damping circuit card assembly includes a populated circuit card having a mass M. A closed metal container is coupled to a surface of the populated circuit card at approximately a geometric center of the populated circuit card. Tungsten balls fill approximately 90% of the metal container with a collective mass of the tungsten balls being approximately (0.07) M.

  15. Nonlocal quasilinear damped differential inclusions

    Directory of Open Access Journals (Sweden)

    Mouffak Benchohra


    Full Text Available In this paper we investigate the existence of mild solutions to second order initial value problems for a class of damped differential inclusions with nonlocal conditions. By using suitable fixed point theorems, we study the case when the multivalued map has convex and nonconvex values.

  16. Red cell DAMPs and inflammation. (United States)

    Mendonça, Rafaela; Silveira, Angélica A A; Conran, Nicola


    Intravascular hemolysis, or the destruction of red blood cells in the circulation, can occur in numerous diseases, including the acquired hemolytic anemias, sickle cell disease and β-thalassemia, as well as during some transfusion reactions, preeclampsia and infections, such as those caused by malaria or Clostridium perfringens. Hemolysis results in the release of large quantities of red cell damage-associated molecular patterns (DAMPs) into the circulation, which, if not neutralized by innate protective mechanisms, have the potential to activate multiple inflammatory pathways. One of the major red cell DAMPs, heme, is able to activate converging inflammatory pathways, such as toll-like receptor signaling, neutrophil extracellular trap formation and inflammasome formation, suggesting that this DAMP both activates and amplifies inflammation. Other potent DAMPs that may be released by the erythrocytes upon their rupture include heat shock proteins (Hsp), such as Hsp70, interleukin-33 and Adenosine 5' triphosphate. As such, hemolysis represents a major inflammatory mechanism that potentially contributes to the clinical manifestations that have been associated with the hemolytic diseases, such as pulmonary hypertension and leg ulcers, and likely plays a role in specific complications of sickle cell disease such as endothelial activation, vaso-occlusive processes and tissue injury.

  17. Composite Struts Would Damp Vibrations (United States)

    Dolgin, Benjamin P.


    New design of composite-material (fiber/matrix laminate) struts increases damping of longitudinal vibrations without decreasing longitudinal stiffness or increasing weight significantly. Plies with opposing chevron patterns of fibers convert longitudinal vibrational stresses into shear stresses in intermediate viscoelastic layer, which dissipate vibrational energy. Composite strut stronger than aluminum strut of same weight and stiffness.

  18. An Active Damping Technique for Small DC-Link Capacitor Based Drive System

    DEFF Research Database (Denmark)

    Maheshwari, Ram Krishan; Munk-Nielsen, Stig; Lu, Kaiyuan


    A small dc-link capacitor based drive system shows instability when it is operated with large input line inductance at operating points with high power. This paper presents a simple, new active damping technique that can stabilize effectively the drive system at unstable operating points, offering...... points. The stabilizing effect of the active damping terms is demonstrated for an induction machine based drive system. The effects of the added damping terms on the machine current and dc-link voltage are analyzed in detail. A design recommendation for the proposed active damping terms is given...

  19. Damped Oscillator with Delta-Kicked Frequency (United States)

    Manko, O. V.


    Exact solutions of the Schrodinger equation for quantum damped oscillator subject to frequency delta-kick describing squeezed states are obtained. The cases of strong, intermediate, and weak damping are investigated.

  20. Topology Optimization of Constrained Layer Damping on Plates Using Method of Moving Asymptote (MMA Approach

    Directory of Open Access Journals (Sweden)

    Zheng Ling


    Full Text Available Damping treatments have been extensively used as a powerful means to damp out structural resonant vibrations. Usually, damping materials are fully covered on the surface of plates. The drawbacks of this conventional treatment are also obvious due to an added mass and excess material consumption. Therefore, it is not always economical and effective from an optimization design view. In this paper, a topology optimization approach is presented to maximize the modal damping ratio of the plate with constrained layer damping treatment. The governing equation of motion of the plate is derived on the basis of energy approach. A finite element model to describe dynamic performances of the plate is developed and used along with an optimization algorithm in order to determine the optimal topologies of constrained layer damping layout on the plate. The damping of visco-elastic layer is modeled by the complex modulus formula. Considering the vibration and energy dissipation mode of the plate with constrained layer damping treatment, damping material density and volume factor are considered as design variable and constraint respectively. Meantime, the modal damping ratio of the plate is assigned as the objective function in the topology optimization approach. The sensitivity of modal damping ratio to design variable is further derived and Method of Moving Asymptote (MMA is adopted to search the optimized topologies of constrained layer damping layout on the plate. Numerical examples are used to demonstrate the effectiveness of the proposed topology optimization approach. The results show that vibration energy dissipation of the plates can be enhanced by the optimal constrained layer damping layout. This optimal technology can be further extended to vibration attenuation of sandwich cylindrical shells which constitute the major building block of many critical structures such as cabins of aircrafts, hulls of submarines and bodies of rockets and missiles as an

  1. Kinetic Damping of Toroidal Alfven Eigenmodes

    International Nuclear Information System (INIS)

    Fu, G.Y.; Berk, H.L.; Pletzer, A.


    The damping of Toroidal Alfven Eigenmodes in JET plasmas is investigated by using a reduced kinetic model. Typically no significant damping is found to occur near the center of the plasma due to mode conversion to kinetic Alfven waves. In contrast, continuum damping from resonance near the plasma edge may be significant, and when it is, it gives rise to damping rates that are compatible with the experimental observations

  2. Effects of aging on temporal predictive mechanisms of speech and hand motor reaction time. (United States)

    Johari, Karim; den Ouden, Dirk-Bart; Behroozmand, Roozbeh


    Evidence from previous studies has suggested that movement execution in younger adults is accelerated in response to temporally predictable vs. unpredictable sensory stimuli. This effect indicates that external temporal information can modulate motor behavior; however, how aging can influence temporal predictive mechanisms in motor system has yet to be understood. The objective of the present study was to investigate aging effects on the initiation and inhibition of speech and hand movement reaction times in response to temporally predictable and unpredictable sensory stimuli. Fifteen younger (mean age 22.6) and fifteen older (mean age 63.8) adults performed a randomized speech vowel vocalization or button press initiation and inhibition tasks in two counterbalanced blocks in response to temporally predictable and unpredictable visual cue stimuli. Results showed that motor reaction time was accelerated in both younger and older adults for predictable vs. unpredictable stimuli during initiation and inhibition of speech and hand movement. However, older adults were significantly slower than younger adults in motor execution of speech and hand movement when stimulus timing was unpredictable. Moreover, we found that overall, motor inhibition of speech and hand was executed faster than their initiation. Our findings suggest that older adults can compensate age-related decline in motor reaction times by incorporating external temporal information and execute faster movement in response to predictable stimuli, whereas unpredictable temporal information cannot counteract aging effects efficiently and lead to less accurate motor timing predictive codes for speech production and hand movement.

  3. Enhanced Stability of Capacitor-Current Feedback Active Damping for LCL-Filtered Grid Converters

    DEFF Research Database (Denmark)

    Xin, Zhen; Wang, Xiongfei; Loh, Poh Chiang


    the robustness of damping, this paper proposes an improved damping controller with the capacitor current feedback loop, which is based on the second-order generalized integrator, instead of a proportional gain, which can effectively mitigate the detrimental effect of the time delay. Robustness of the proposed......The proportional capacitor-current feedback active damping method has been widely used to suppress the LCL-filter resonance. However, the time delay in the damping control loop may lead to non-minimum phase or even unstable responses when the resonance frequency varies in a wide range. To improve...

  4. Two methods for estimating aeroelastic damping of operational wind turbine modes from experiments

    DEFF Research Database (Denmark)

    Hansen, Morten Hartvig; Thomsen, Kenneth; Fuglsang, Peter


    The theory and results of two experimental methods for estimating the modal damping of a wind turbine during operation are presented. Estimations of the aeroelastic damping of the operational turbine modes (including the effects of the aerodynamic forces) give a quantitative view of the stability...... the deterministic excitation, and the modal frequencies and damping of the first tower and first edgewise whirling modes are extracted. Copyright © 2006 John Wiley & Sons, Ltd....

  5. Selection an Optimal Control Channel for STATCOM-Based Stabilizers to Damp Inter-Area Oscillation


    A. Samanfar; M. R. Shakarami; R. Sedaghati


    In static synchronous compensator (STATCOM) a controllable AC voltage is generated by a voltage-source converter. There are two control channels for controlling of magnitude and phase of the voltage. When these devices are used for damping inter-are oscillations in multi-machine power systems, a damping stabilizer can be applied for both channels. In this paper, a method by quadratic mathematical programming has been presented to design of the damping stabilizer. By this method, the effect of...

  6. Anisotropic damping of Timoshenko beam elements

    DEFF Research Database (Denmark)

    Hansen, M.H.


    This report contains a description of a structural damping model for Timoshenko beam elements used in the aeroelastic code HawC developed at Risø for modeling wind turbines. The model has been developed to enable modeling of turbine blades which oftenhave different damping characteristics...... for ¤flapwise¤, ¤edgewise¤ and ¤torsional¤ vibrations. The structural damping forces acting on the beam element are modeled by viscous damping described by an element damping matrix. The composition of this matrix is basedon the element mass and stiffness matrices. It is shown how the coefficients for the mass...

  7. DAMP-TLR-cytokine axis dictates the fate of tumor. (United States)

    Patidar, Ashok; Selvaraj, Sathishkumar; Sarode, Aditya; Chauhan, Prashant; Chattopadhyay, Debprasad; Saha, Bhaskar


    Random mutations leading to loss of cell cycle control is not a rare occurrence in an organism but the mutated cells are recognized and eliminated preventing the development of a tumor. These potentially tumorigenic cells release damage-associated molecular patterns (DAMPs), which are recognized by toll-like receptors (TLRs) on macrophages and dendritic cells. The initial TLR-DAMP interactions lead to different responses such as altered antigen presentation and cytokine release that directly affect T cell activation and removal of the tumorigenic cells. The indirect effects of TLR-DAMP interaction include chemokine-directed altered T cell trafficking, angiogenesis for both T cell infiltration and tumor cell metastasis, and alteration of intra-tumoral milieu contributing to the development of tumor cells heterogeneity. Thus, the initial TLR-DAMP interaction has a set of local effects that modulate tumor cell growth and heterogeneity and a disseminating set of central effects that dynamically affect T cell trafficking and functions. Herein, we argue that the DAMP-TLR-cytokine axis in the tumor microenvironment serves as the mainstay that orchestrates and regulates the pro- and anti-tumor elements which dynamically interact between themselves eventuating in tumor regression or growth. The knowledge of this TLR-based immuno-surveillance framework is a key to developing a novel immunotherapy against cancer. Copyright © 2017. Published by Elsevier Ltd.

  8. Effect of Temporal Relationships in Associative Rule Mining for Web Log Data (United States)

    Mohd Khairudin, Nazli; Mustapha, Aida


    The advent of web-based applications and services has created such diverse and voluminous web log data stored in web servers, proxy servers, client machines, or organizational databases. This paper attempts to investigate the effect of temporal attribute in relational rule mining for web log data. We incorporated the characteristics of time in the rule mining process and analysed the effect of various temporal parameters. The rules generated from temporal relational rule mining are then compared against the rules generated from the classical rule mining approach such as the Apriori and FP-Growth algorithms. The results showed that by incorporating the temporal attribute via time, the number of rules generated is subsequently smaller but is comparable in terms of quality. PMID:24587757

  9. Effect of temporal relationships in associative rule mining for web log data. (United States)

    Khairudin, Nazli Mohd; Mustapha, Aida; Ahmad, Mohd Hanif


    The advent of web-based applications and services has created such diverse and voluminous web log data stored in web servers, proxy servers, client machines, or organizational databases. This paper attempts to investigate the effect of temporal attribute in relational rule mining for web log data. We incorporated the characteristics of time in the rule mining process and analysed the effect of various temporal parameters. The rules generated from temporal relational rule mining are then compared against the rules generated from the classical rule mining approach such as the Apriori and FP-Growth algorithms. The results showed that by incorporating the temporal attribute via time, the number of rules generated is subsequently smaller but is comparable in terms of quality.

  10. Dynamic modulus and damping of boron, silicon carbide, and alumina fibers (United States)

    Dicarlo, J. A.; Williams, W.


    The dynamic modulus and damping capacity for boron, silicon carbide, and silicon carbide-coated boron fibers were measured from -190 to 800 C. The single fiber vibration test also allowed measurement of transverse thermal conductivity for the silicon carbide fibers. Temperature-dependent damping capacity data for alumina fibers were calculated from axial damping results for alumina-aluminum composites. The dynamic fiber data indicate essentially elastic behavior for both the silicon carbide and alumina fibers. In contrast, the boron-based fibers are strongly anelastic, displaying frequency-dependent moduli and very high microstructural damping. The single fiber damping results were compared with composite damping data in order to investigate the practical and basic effects of employing the four fiber types as reinforcement for aluminum and titanium matrices.

  11. Design of passive piezoelectric damping for space structures. Final Report Ph.D. Thesis (United States)

    Hagood, Nesbitt W., IV; Aldrich, Jack B.; Vonflotow, Andreas H.


    Passive damping of structural dynamics using piezoceramic electromechanical energy conversion and passive electrical networks is a relatively recent concept with little implementation experience base. This report describes an implementation case study, starting from conceptual design and technique selection, through detailed component design and testing to simulation on the structure to be damped. About 0.5kg. of piezoelectric material was employed to damp the ASTREX testbed, a 500kg structure. Emphasis was placed upon designing the damping to enable high bandwidth robust feedback control. Resistive piezoelectric shunting provided the necessary broadband damping. The piezoelectric element was incorporated into a mechanically-tuned vibration absorber in order to concentrate damping into the 30 to 40 Hz frequency modes at the rolloff region of the proposed compensator. A prototype of a steel flex-tensional motion amplification device was built and tested. The effective stiffness and damping of the flex-tensional device was experimentally verified. When six of these effective springs are placed in an orthogonal configuration, strain energy is absorbed from all six degrees of freedom of a 90kg. mass. A NASTRAN finite element model of the testbed was modified to include the six-spring damping system. An analytical model was developed for the spring in order to see how the flex-tensional device and piezoelectric dimensions effect the critical stress and strain energy distribution throughout the component. Simulation of the testbed demonstrated the damping levels achievable in the completed system.

  12. Theory of coupled Landau damping

    CERN Document Server

    Métral, Elias


    The influence of linear coupling between the transverse planes on Landau damping of coherent instabilities is assessed using two typical frequency distributions (Lorentzian, , and "elliptical", where ). A general stability criterion is derived in both cases that includes the coupling strength and the distance from the resonance It reveals the possibility of sharing the "stabilising" frequency spreads between the two planes. This can significantly improve the coherent beam stability, especially in cases where the situation is more critical in one plane. Another important observation is the fact that the influence of a large imaginary part in the beam-environment impedance, which normally requires a large frequency spread for Landau damping, can be compensated (at least in one plane) by a judicious choice of the coupling. The conjunction of these two features could explain why a machine like the CERN-PS can be stabilised by tuning close to a coupling resonance and can be used to determine optimum values for the...

  13. Robust Rudder Roll Damping Control

    DEFF Research Database (Denmark)

    Yang, C.

    -infinity theory is used to deal with the problem. The necessary mathematical tools and the H-Infinity theory as the basis of controller design are presented in Chapter 2 and 3. The mu synthesis and the D-K iteration are introduced in Chapter 3. The ship dynamics and modeling technology are discussed in Chapter 4......The results of a systematic research to solve a specific ship motion control problem, simultaneous roll damping and course keeping using the rudder are presented in this thesis. The fundamental knowledge a priori is that rudder roll damping is highly sensitive to the model uncertainty, therefore H......, two kinds of ship model have been obtained: linear ship model used for designing the controller and nonlinear model used for simulation. The ship model uncertainty is discussed in this chapter and so is a wave model because the ship's roll motion is caused by waves. Using an unstructured model...

  14. Effects of Trait Anxiety and Manipulated Mood on the Temporal Allocation of Attention to Emotional Information


    Farach, Francisco J.


    Cognitive theories and empirical research suggest the existence of a moderate anxiety-linked attentional bias for threatening information. The present study extended this work by examining the effects of individual differences in trait anxiety and the manipulated valence and arousal of mood on the temporal allocation of attention to emotional information. Male undergraduate participants (N = 168) completed an assessment of the temporal allocation of attention to negative and positive words fi...

  15. Modelling of Dampers and Damping in Structures

    DEFF Research Database (Denmark)

    Høgsberg, Jan Riess


    and the maximum attainable damping are found by maximizing the expression for the damping ratio. The theory is formulated for linear damper models, but may also be applied for non-linear dampers in terms of equivalent linear parameters for stiffness and damping, respectively. The format of the expressions......, and thereby the damping, of flexible structures are generally described in terms of the dominant vibration modes. A system reduction technique, where the damped vibration mode is constructed as a linear combination of the undamped mode shape and the mode shape obtained by locking the damper, is applied....... This two-component representation leads to a simple solution for the modal damping representing the natural frequency and the associated damping ratio. It appears from numerical examples that this system reduction technique provides very accurate results. % Analytical expressions for the optimal tuning...

  16. Sheath waves, non collisional dampings

    International Nuclear Information System (INIS)

    Marec, Jean Lucien Ernest


    When a metallic conductor is inserted into an ionised gas, an area of electron depletion is formed between the conductor and the plasma: the ionic sheath. Moreover, if the conductor is excited by an electric field, this ionic sheath plays an important role with respect to microwave properties. In this research thesis, the author addresses the range of frequencies smaller than the plasma frequency, and reports the study of resonance phenomena. After a presentation of the problem through a bibliographical study, the author recalls general characteristics of sheath wave propagation and of sheath resonances, and discusses the validity of different hypotheses (for example and among others, electrostatic approximations, cold plasma). Then, the author more particularly addresses theoretical problems related to non collisional dampings: brief bibliographical study, detailed presentation and description of the theoretical model, damping calculation methods. The author then justifies the design and performance of an experiment, indicates measurement methods used to determine plasma characteristics as well as other magnitudes which allow the description of mechanisms of propagation and damping of sheath waves. Experimental results are finally presented with respect to various parameters. The author discusses to which extent the chosen theoretical model is satisfying [fr

  17. The DAMPE silicon tungsten tracker

    CERN Document Server

    Gallo, Valentina; Asfandiyarov, R; Azzarello, P; Bernardini, P; Bertucci, B; Bolognini, A; Cadoux, F; Caprai, M; Domenjoz, M; Dong, Y; Duranti, M; Fan, R; Franco, M; Fusco, P; Gargano, F; Gong, K; Guo, D; Husi, C; Ionica, M; Lacalamita, N; Loparco, F; Marsella, G; Mazziotta, M N; Mongelli, M; Nardinocchi, A; Nicola, L; Pelleriti, G; Peng, W; Pohl, M; Postolache, V; Qiao, R; Surdo, A; Tykhonov, A; Vitillo, S; Wang, H; Weber, M; Wu, D; Wu, X; Zhang, F; De Mitri, I; La Marra, D


    The DArk Matter Particle Explorer (DAMPE) satellite has been successfully launched on the 17th December 2015. It is a powerful space detector designed for the identification of possible Dark Matter signatures thanks to its capability to detect electrons and photons with an unprecedented energy resolution in an energy range going from few GeV up to 10 TeV. Moreover, the DAMPE satellite will contribute to a better understanding of the propagation mechanisms of high energy cosmic rays measuring the nuclei flux up to 100 TeV. DAMPE is composed of four sub-detectors: a plastic strip scintillator, a silicon-tungsten tracker-converter (STK), a BGO imaging calorimeter and a neutron detector. The STK is made of twelve layers of single-sided AC-coupled silicon micro-strip detectors for a total silicon area of about 7 $m^2$ . To promote the conversion of incident photons into electron-positron pairs, tungsten foils are inserted into the supporting structure. In this document, a detailed description of the STK constructi...

  18. Analysis of the Passive Damping Losses in LCL-Filter-Based Grid Converters

    DEFF Research Database (Denmark)

    Alzola, Rafael Pena; Liserre, Marco; Blaabjerg, Frede


    Passive damping is the most adopted method to guarantee the stability of LCL-filter-based grid converters. The method is simple and, if the switching and sampling frequencies are sufficiently high, the damping losses are negligible. This letter proposes the tuning of different passive damping...... methods and an analytical estimation of the damping losses allowing the choice of the minimum resistor value resulting in a stable current control and not compromising the LCL-filter effectiveness. Stability, including variations in the grid inductance, is studied through root locus analysis in the z...

  19. Higher Order Mode (HOM) Impedance and Damping Study for the LHC Capture Cavity

    CERN Document Server

    Linnecar, Trevor Paul R; Tückmantel, Joachim; CERN. Geneva. SPS and LHC Division


    To investigate the higher order mode, HOM, damping in the LHC 200MHz ACN cavity when using four HOM couplers, simulations have been done by both 3-D frequency domain and time domain methods. These simulations have previously been used in other studies of HOM damped cavities and shown to be effective by comparing measurement and simulation results[1] [2]. Using these methods the impedance spectrum of the HOM modes in the cavity before and after damping has been obtained. From this, detailed information about the HOM coupler's contribution to HOM damping can be obtained. The distribution and magnitude of some potentially dangerous HOM modes in the ACN cavity have been found.

  20. Superconducting wiggler magnets for beam-emittance damping rings

    CERN Document Server

    Schoerling, Daniel


    Ultra-low emittance beams with a high bunch charge are necessary for the luminosity performance of linear electron-positron colliders, such as the Compact Linear Collider (CLIC). An effective way to create ultra-low emittance beams with a high bunch charge is to use damping rings, or storage rings equipped with strong damping wiggler magnets. The remanent field of the permanent magnet materials and the ohmic losses in normal conductors limit the economically achievable pole field in accelerator magnets operated at around room temperature to below the magnetic saturation induction, which is 2.15 T for iron. In wiggler magnets, the pole field in the center of the gap is reduced further like the hyperbolic cosine of the ratio of the gap size and the period length multiplied by pi. Moreover, damping wiggler magnets require relatively large gaps because they have to accept the un-damped beam and to generate, at a small period length, a large magnetic flux density amplitude to effectively damp the beam emittance....

  1. Kinetic damping of transverse waves in a homogeneous magnetized plasma

    International Nuclear Information System (INIS)

    Lehnert, B.


    In a hot magnetized plasma large ion excursions can take place along the magnetic field lines, thereby introducing kinetic effects which cannot be treated in terms of a macroscopic fluid model. This effect is studied for the transverse wave motion of ions and electrons in a homogeneous thermal plasma, being immersed in a homogeneous magnetic field. Strong kinetic wave damping is found to occur when the product ku sub (i) of the wave number k and the ion thermal velocity u sub (i) exceeds the ion gyro frequency ω sub (i). The physical mechanism of this damping originates from large ion excursions and differs from that of Landau damping. The present results suggest that kinetic damping becomes important in hot tokamak plasmas for wave lengths of the order of a few centimeters and less. In high-beta systems, such as the Z-pinch, wave lengths in a large range become affected by kinetic damping, in some case even those which are comparable to the characteristic macroscopic dimensions. This also affects the conditions of plasma stability and plasma high-frequency heating. (Author)

  2. Vibration of fusion reactor components with magnetic damping

    Energy Technology Data Exchange (ETDEWEB)

    D’Amico, Gabriele; Portone, Alfredo [Fusion for Energy – Torres Diagonal Litoral B3 – c/Josep Plá n.2, Barcelona (Spain); Rubinacci, Guglielmo [Department of Electrical Eng. and Information Technologies, Università di Napoli Federico II, Via Claudio, 21, 80125 Napoli (Italy); Testoni, Pietro, E-mail: [Fusion for Energy – Torres Diagonal Litoral B3 – c/Josep Plá n.2, Barcelona (Spain)


    The aim of this paper is to assess the importance of the magnetic damping in the dynamic response of the main plasma facing components of fusion machines, under the strong Lorentz forces due to Vertical Displacement Events. The additional eddy currents due to the vibration of the conducting structures give rise to volume loads acting as damping forces, a kind of viscous damping, being these additional loads proportional to the vibration speed. This effect could play an important role when assessing, for instance, the inertial loads associated to VV movements in case of VDEs. In this paper, we present the results of a novel numerical formulation, in which the field equations are solved by adopting a very effective fully 3D integral formulation, not limited to the analysis of thin shell structures, as already successfully done in several approaches previously published.

  3. Damping Improvement of Multiple Damping Controllers by Using Optimal Coordinated Design Based on PSS and FACTS-POD in a Multi-Machine Power System

    Directory of Open Access Journals (Sweden)

    Ali Nasser Hussain


    Full Text Available The aim of this study is to present a comprehensive comparison and assessment of the damping function improvement of power system oscillation for the multiple damping controllers using the simultaneously coordinated design based on Power System Stabilizer (PSS and Flexible AC Transmission System (FACTS devices. FACTS devices can help in the enhancing the stability of the power system by adding supplementary damping controller to the control channel of the FACTS input to implement the task of Power Oscillation Damping (FACT POD controller. Simultaneous coordination can be performed in different ways. First, the dual coordinated designs between PSS and FACTS POD controller or between different FACTS POD controllers are arranged in a multiple FACTS devices without PSS. Second, the simultaneous coordination has been extended to triple coordinated design among PSS and different FACTS POD controllers. The parameters of the damping controllers have been tuned in the individual controllers and coordinated designs by using a Chaotic Particle Swarm Optimization (CPSO algorithm that optimized the given eigenvalue-based objective function. The simulation results for a multi-machine power system show that the dual coordinated design provide satisfactory damping performance over the individual control responses. Furthermore, the triple coordinated design has been shown to be more effective in damping oscillations than the dual damping controllers.

  4. Nonlinear wave damping due to multi-plasmon resonances (United States)

    Brodin, G.; Ekman, R.; Zamanian, J.


    For short wavelengths, it is well known that the linearized Wigner–Moyal equation predicts wave damping due to wave-particle interaction, where the resonant velocity shifted from the phase velocity by a velocity {v}q={{\\hslash }}k/2m. Here {{\\hslash }} is the reduced Planck constant, k is the wavenumber and m is the electron mass. Going beyond linear theory, we find additional resonances with velocity shifts {{nv}}q,n=2,3, \\ldots , giving rise to a new wave-damping mechanism that we term multi-plasmon damping, as it can be seen as the simultaneous absorption (or emission) of multiple plasmon quanta. Naturally this wave damping is not present in classical plasmas. For a temperature well below the Fermi temperature, if the linear (n = 1) resonant velocity is outside the Fermi sphere, the number of linearly resonant particles is exponentially small, while the multi-plasmon resonances can be located in the bulk of the distribution. We derive sets of evolution equations for the case of two-plasmon and three-plasmon resonances for Langmuir waves in the simplest case of a fully degenerate plasma. By solving these equations numerically for a range of wave-numbers we find the corresponding damping rates, and we compare them to results from linear theory to estimate the applicability. Finally, we discuss the effects due to a finite temperature.

  5. Study of damping characteristics of fibre reinforced composite aerospace structure

    International Nuclear Information System (INIS)

    Khan, M.Z.; Saleh, S.; Munir, A.


    Composite materials are used in a variety of high demanding structural applications. Apart from their other preferable properties, they have high-energy dissipation characteristics, which is important aspect when we repeatedly wiggle the system back and forth. It is important to have thorough understanding of material damping behavior; in general materials damping tends to be complex nonlinear function of vibration amplitude, frequency of loading and material formulation. There are number of mathematical models available in literature to obtain hysteresis curves. One approach for identifying damping characteristics used mechanical hysteresis curves. In present work, a phenomenon was observed during testing of fibre reinforced composite beam of an aerospace structure, that for increase load in structure, the path of Force vs. Displacement curve is different than the path of unloading. A plot is generated which indicate the hysteresis loop representing the steady state dynamic behavior of material. The area enclosed by such curves is proportional to energy dissipation per cycle. However, the specific shape of the curve also has important implications for characterizing the specific functional form of the damping. Therefore, it is important to develop methods for accurately accounting for such effects. The current work explores the damping characteristics both theoretically and experimentally. (author)

  6. A damping ring design for future linear colliders

    International Nuclear Information System (INIS)

    Raubenheimer, T.O.; Gabella, W.E.; Morton, P.L.; Lee, M.J.; Rivkin, L.Z.; Ruth, R.D.


    In this paper we present a preliminary design of a damping ring for the TeV Linear Collider (TLC), a future linear collider with an energy of 1/2 to 1 TeV in the center of mass. Because of limits on the emittance, repetition rate and longitudinal impedance, we use combined function FODO cells with wigglers in insertion regions; there are approximately 22 meters of wigglers in the 155 meter ring. The ring has a normalized horizontal emittance, including the effect of intrabeam scattering, which is less than 3 /times/ 10/sup /minus/6/ and an emittance ratio of ε/sub x/ ∼ 100ε/sub y/. It is designed to damp bunches for 7 vertical damping times while operating at a repetition rate of 360 Hz. Because of these requirements on the emittance and the damping per bunch, the ring operates at 1.8 GeV and is relatively large, allowing more bunches to be damped at once. 10 refs., 5 figs., 2 tabs

  7. Modeling Temporal Behavior of Awards Effect on Viewership of Movies

    KAUST Repository

    Altaf, Basmah


    The “rich get richer” effect is well-known in recommendation system. Popular items are recommended more, then purchased more, resulting in becoming even more popular over time. For example, we observe in Netflix data that awarded movies are more popular than non-awarded movies. Unlike other work focusing on making fair/neutralized recommendation, in this paper, we target on modeling the effect of awards on the viewership of movies. The main challenge of building such a model is that the effect on popularity changes over time with different intensity from movie to movie. Our proposed approach explicitly models the award effects for each movie and enables the recommendation system to provide a better ranked list of recommended movies. The results of an extensive empirical validation on Netflix and MovieLens data demonstrate the effectiveness of our model.

  8. An Adaptive Damping Network Designed for Strapdown Fiber Optic Gyrocompass System for Ships

    Directory of Open Access Journals (Sweden)

    Jin Sun


    Full Text Available The strapdown fiber optic gyrocompass (strapdown FOGC system for ships primarily works on external horizontal damping and undamping statuses. When there are large sea condition changes, the system will switch frequently between the external horizontal damping status and the undamping status. This means that the system is always in an adjustment status and influences the dynamic accuracy of the system. Aiming at the limitations of the conventional damping method, a new design idea is proposed, where the adaptive control method is used to design the horizontal damping network of the strapdown FOGC system. According to the size of acceleration, the parameters of the damping network are changed to make the system error caused by the ship’s maneuvering to a minimum. Furthermore, the jump in damping coefficient was transformed into gradual change to make a smooth system status switch. The adaptive damping network was applied for strapdown FOGC under the static and dynamic condition, and its performance was compared with the conventional damping, and undamping means. Experimental results showed that the adaptive damping network was effective in improving the dynamic performance of the strapdown FOGC.

  9. The temporal effects of parental divorce on youth substance use. (United States)

    Arkes, Jeremy


    This article examines how the parental divorce process affects youth substance use at various stages relative to the divorce. With child-fixed-effect models and a baseline period that is long before the divorce, the estimates rely on within-child changes over time. Youth are more likely to use alcohol 2-4 years before a parental divorce. After the divorce, youth have an increased risk of using alcohol and marijuana, with the effect for marijuana being 12.1 percentage points in the two years right after the divorce (p = .010). The magnitudes of the effects persist as time passes from the divorce.

  10. Energy spread in SLC linac with Landau damping

    International Nuclear Information System (INIS)

    Seeman, J.


    The possibility of using Landau damping to reduce the growth of the beam size due to transverse wake fields has been known for some time. Recently K. Bane has calculated the effects of Landau damping for the SLC. The energy spread is then slowly removed so that at the end of the linac it has returned to the SLC specification of less than +0.5%. The purpose of the energy spread is to reduce the resonant driving of the tail of the bunch by the head. In this note the expected energy spreads within the beam are tabulated at various positions along the linac for use by those people designing momentum dependent equipment and for those interested in Landau damping

  11. Nanoscale shape-memory alloys for ultrahigh mechanical damping. (United States)

    San Juan, Jose; Nó, Maria L; Schuh, Christopher A


    Shape memory alloys undergo reversible transformations between two distinct phases in response to changes in temperature or applied stress. The creation and motion of the internal interfaces between these phases during such transformations dissipates energy, making these alloys effective mechanical damping materials. Although it has been shown that reversible phase transformations can occur in nanoscale volumes, it is not known whether these transformations have a sample size dependence. Here, we demonstrate that the two phases responsible for shape memory in Cu-Al-Ni alloys are more stable in nanoscale pillars than they are in the bulk. As a result, the pillars show a damping figure of merit that is substantially higher than any previously reported value for a bulk material, making them attractive for damping applications in nanoscale and microscale devices.

  12. Temporal correlations and structural memory effects in break junction measurements

    DEFF Research Database (Denmark)

    Magyarkuti, A.; Lauritzen, Kasper Primdal; Balogh, Zoltan Imre


    that correlations between the opening and subsequent closing traces may indicate structural memory effects in atomic-sized metallic and molecular junctions. Applying these methods on measured and simulated gold metallic contacts as a test system, we show that the surface diffusion induced flattening of the broken......-molecule junctions, we demonstrate pronounced contact memory effects and recovery of the molecule for junctions breaking before atomic chains are formed. However, if chains are pulled the random relaxation of the chain and molecule after rupture prevents opening-closing correlations....

  13. Impulsive parametric damping in energy harvesting

    International Nuclear Information System (INIS)

    Tehrani, Maryam Ghandchi; Pumhoessel, Thomas


    In this paper, an electro-mechanical system with a time-varying damper, which is capable of changing the damping coefficient impulsively, is considered. The effect of the impulsive parametric damping to the modal energy content of the mechanical system is investigated analytically as well as numerically. First, the governing differential equation is presented and then the solution of the system's response is obtained through numerical integration. The energy dissipated by the damper is then calculated to investigate the amount of the energy that can be harvested, and the results are compared with the results from a system without parametric impulses. It is shown, that the amount of the harvested energy can be increased by introducing parametric impulses. Then, an analytical formulation is derived for the system using Dirac-Delta impulses and the analytical results are validated with numerical simulations. The device is subjected to an initial condition and therefore is vibrating freely without any base excitation. This could be used for applications such as harvesting energy from the passage of a train, where the train vibration can introduce an initial velocity to the harvester and the energy can then be extracted from the free vibration of the harvester. (paper)

  14. Collision damping of collective state in an infinite system

    International Nuclear Information System (INIS)

    Ando, K.; Kyoto Univ.


    On the basis of the second-order perturbation formula, a transparent derivation is given for the damping width of zero sound at absolute zero temperature (T=0). It is shown that the present result is in agreement with Landau's suggestion that the width at T=0 can be obtained by multiplying the classical result by energy ω- and T-dependent factor 1+(ω/2πT) 2 with T→0. An attempt is made at expressing the interference effect between particle and hole contributions to giant resonance widths in a form appealing to physical intuition, with a view toward macroscopic understanding of the damping of giant resonance states. (author)

  15. Damping beam displacements through phase mixing: an illustrative model

    International Nuclear Information System (INIS)

    Barletta, W.A.; Briggs, R.J.


    We develop a simple model of a beam transported in a hard wall channel (an idealized very-high-order magnetic-multipole channel). The extremely anharmonic nature of the potential leads to damping of coherent transverse displacements of the beam via phase mixing. For the case of small uniform displacements of the beam we can write down by inspection the analytical form of the motion of the beam centroid. The same technique allows us to evaluate the effects of focussing and scattering elements in the transport channel upon the damping of the transverse motion of the beam

  16. Damping rates of the SRRC storage ring

    International Nuclear Information System (INIS)

    Hsu, K.T.; Kuo, C.C.; Lau, W.K.; Weng, W.T.


    The SRRC storage ring is a low emittance synchrotron radiation machine with nominal operation energy 1.3 GeV. The design damping time due to synchrotron radiation is 10.7, 14.4, 8.7 ms for the horizontal, vertical and longitudinal plane, respectively. The authors measured the real machine damping time as a function of bunch current, chromaticity, etc. To damp the transverse beam instability, especially in the vertical plane, they need to increase chromaticity to large positive value. The damping rates are much larger than the design values. Landau damping contribution in the longitudinal plane is quite large, especially in the multibunch mode. The estimated synchrotron tune spread from the Landau damping is in agreement with the measured coherent longitudinal coupled bunch oscillation amplitude

  17. Characterizing the surface heterogeneity of fire effects using multi-temporal reflective wavelength data

    CSIR Research Space (South Africa)

    Roy, DP


    Full Text Available of fire effects using multi-temporal reflective wavelength data D. P. Roy a; T. Landmann ba Department of Geography, College Park, and NASA Goddard, Space Flight Center, University of Maryland. Code 614.5 (B32), Greenbelt, MD 20771. USAb CSIR Environmentek... Characterizing the surface heterogeneity of fire effects using multi-temporal reflective wavelength data D. P. ROY*{ and T. LANDMANN{ {Department of Geography, University of Maryland, College Park, and NASA Goddard, Space Flight Center, Code 614.5 (B32...

  18. Over-activation in bilateral superior temporal gyrus correlated with subsequent forgetting effect of Chinese words. (United States)

    Chen, Tzu-Ching; Kuo, Wen-Jui; Chiang, Ming-Chang; Tseng, Yi-Jhan; Lin, Yung-Yang


    We evaluated the subsequent memory and forgotten effects for Chinese using event-related fMRI. Sixteen normal subjects were recruited and performing incidental memory tasks where semantic decision was required during memory encoding. Consistent with previous studies, our results showed bilateral frontal regions as the main locus for the subsequent memory effect. However, contrast between miss and hit responses revealed larger activation in bilateral superior temporal gyrus. We proposed that larger activation in the superior temporal gyrus may reflect alteration of self-monitoring process which resulted in unsuccessful memory encoding for the miss items. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. The influence of acoustic damping on the transformation efficiency of capacitive micromachined ultrasonic transducer in air (United States)

    Lee, Seung-Mok; Cha, Bu-sang; Okuyama, Masanori


    Acoustic damping of a capacitive micromachined ultrasonic transducer (CMUT) in air causes mechanical impedance to the membrane vibration, which significantly influences the transformation efficiency of the device. We observed the effect of acoustic damping on the transformation efficiency of a CMUT under various external acoustic pressure and device structure conditions; the results were compared with other factors such as capacitance variations originating from the change in air-hole rate [area ratio (AR)] over the total membrane area. The damping ratio of the perforated membrane plate was computed for each acoustic pressure condition, and the results were introduced into calculations of the membrane displacement using the finite element method to take the squeeze-film damping effect into account. The Q factor and transformation efficiency of the CMUT under various AR for the membrane and dimension conditions of the device were studied; the acoustic damping effect is discussed in terms of design optimization.

  20. Effects of Hand Proximity and Movement Direction in Spatial and Temporal Gap Discrimination (United States)

    Wiemers, Michael; Fischer, Martin H.


    Previous research on the interplay between static manual postures and visual attention revealed enhanced visual selection near the hands (near-hand effect). During active movements there is also superior visual performance when moving toward compared to away from the stimulus (direction effect). The “modulated visual pathways” hypothesis argues that differential involvement of magno- and parvocellular visual processing streams causes the near-hand effect. The key finding supporting this hypothesis is an increase in temporal and a reduction in spatial processing in near-hand space (Gozli et al., 2012). Since this hypothesis has, so far, only been tested with static hand postures, we provide a conceptual replication of Gozli et al.’s (2012) result with moving hands, thus also probing the generality of the direction effect. Participants performed temporal or spatial gap discriminations while their right hand was moving below the display. In contrast to Gozli et al. (2012), temporal gap discrimination was superior at intermediate and not near hand proximity. In spatial gap discrimination, a direction effect without hand proximity effect suggests that pragmatic attentional maps overshadowed temporal/spatial processing biases for far/near-hand space. PMID:28018268

  1. Effects of hand proximity and movement direction in spatial and temporal gap discrimination

    Directory of Open Access Journals (Sweden)

    Michael Wiemers


    Full Text Available Previous research on the interplay between static manual postures and visual attention revealed enhanced visual selection near the hands (near-hand effect. During active movements there is also superior visual performance when moving towards compared to away from the stimulus (direction effect. The modulated visual pathways hypothesis argues that differential involvement of magno- and parvocellular visual processing streams causes the near-hand effect. The key finding supporting this hypothesis is an increase in temporal and a reduction in spatial processing in near-hand space (Gozli, West, & Pratt, 2012. Since this hypothesis has, so far, only been tested with static hand postures, we provide a conceptual replication of Gozli et al.’s result with moving hands, thus also probing the generality of the direction effect. Participants performed temporal or spatial gap discriminations while their right hand was moving below the display. In contrast to Gozli et al. (2012, temporal gap discrimination was superior at intermediate and not near hand proximity. In spatial gap discrimination, a direction effect without hand proximity effect suggests that pragmatic attentional maps overshadowed temporal/spatial processing biases for far/near-hand space.

  2. Parametric Landau damping of space charge modes

    Energy Technology Data Exchange (ETDEWEB)

    Macridin, Alexandru [Fermilab; Burov, Alexey [Fermilab; Stern, Eric [Fermilab; Amundson, James [Fermilab; Spentzouris, Panagiotis [Fermilab


    Landau damping is the mechanism of plasma and beam stabilization; it arises through energy transfer from collective modes to the incoherent motion of resonant particles. Normally this resonance requires the resonant particle's frequency to match the collective mode frequency. We have identified an important new damping mechanism, parametric Landau damping, which is driven by the modulation of the mode-particle interaction. This opens new possibilities for stability control through manipulation of both particle and mode-particle coupling spectra. We demonstrate the existence of parametric Landau damping in a simulation of transverse coherent modes of bunched accelerator beams with space charge.

  3. The effects of Kanizsa contours on temporal integration and attention in rapid serial visual presentation. (United States)

    Karabay, Aytaç; Akyürek, Elkan G


    Performance in rapid serial visual presentation tasks has been shown to depend on the temporal integration of target stimuli when they are presented in direct succession. Temporal target integration produces a single, combined representation of visually compatible stimuli, which is comparatively easy to identify. It is currently unknown to what extent target compatibility affects this perceptual behavior, because it has not been studied systematically to date. In the present study, the effects of compatibility on temporal integration and attention were investigated by manipulating the Gestalt properties of target features. Of particular interest were configurations in which a global illusory shape was formed when all stimulus features were present; a Kanizsa stimulus, which was expected to have a unifying effect on the perception of the successive targets. The results showed that although the presence of a Kanizsa shape can indeed enhance temporal integration, this also was observed for other good Gestalts, such as due to common fate and closure. Identification accuracy seemed to vary, possibly as a result of masking strength, but this did not seem associated with attentional processing per se. Implications for theories of Gestalt processing and temporal integration are discussed.

  4. Variation of structural damping with response amplitude in piping systems

    International Nuclear Information System (INIS)

    Ware, A.G.


    From tests conducted over the last several years, it has become apparent that structural damping is not a single number applicable to all piping systems, but is highly dependent on piping system parameters such as supports, response amplitude, and insulation. As a result, there is considerable scatter in the available data. Furthermore, the relationships between the parameters and damping are often highly complex, interrelated, and difficult to predict. From tests of piping supported by various typical methods, two basic types of energy dissipation in the supports can be observed. The first is friction such as between spring hangers and their housings or in the internal mechanisms of constant force hangers. The second is impacting such as occurs in snubbers, rigid struts, and rod hangers. Overall, these effects lead to a wide variety of possibilities that can occur at low vibration levels and can change with only a slight perturbation of vibration amplitude. This can account for much of the scatter in the data at low strain levels. Thus damping is almost impossible to predict at low amplitudes, and extrapolation of this type data to higher amplitudes is cautioned. However, once strain levels rise above 100 to 200 micro in/in, the damping trend becomes easier to characterize. From the 100 to 200 micro in/in to 800 to 1000 micro in/in range the damping is fairly constant and is induced primarily by the supports. At the upper end of this range a threshold is reached in which damping increases with increasing strain amplitude. Data in the high strain (plastic range) is sparse since the test usually renders the pipe unsuitable for further use. 15 refs

  5. An investigation into the temporal dimension of the Mozart effect: evidence from the attentional blink task. (United States)

    Ho, Cristy; Mason, Oliver; Spence, Charles


    In the present study, we examined whether the 'Mozart effect' would influence participants' temporal attention using a visual attentional blink (AB) task that provides a reliable measure of the temporal dynamics of visual attention. The 'Mozart effect' refers to the specific claim that listening to Mozart's Sonata for Two Pianos in D Major, K.448 can improve the performance in spatio-temporal tasks. Participants had to try and identify two target digits (in their correct order of presentation) presented amongst a stream of distractor letters in three different conditions (presented in separate blocks of trials): while listening to the Mozart sonata played normally, while listening to the same Mozart sonata played in reverse, and while in silence. The results showed that the participants were able to detect the second target (T2) significantly more accurately (given the correct detection of the first target, T1) in the AB stream when the Mozart sonata was played normally than in either of the other two conditions. Possible explanations for the differential effects of Mozart's music being played normally and in reverse and potential confounds in previous studies reporting a facilitatory 'Mozart effect' are discussed. Our results therefore provide the first empirical demonstration supporting the existence of a purely temporal component to the 'Mozart effect' using a non-spatial visual AB task.

  6. Exploring damping characteristics of composite tower of cable ...

    Indian Academy of Sciences (India)

    Two approaches are considered to define and investigate dynamic characteristics of a composite tower of cable-stayed bridges: The first approach makes use of a simplified approximation of two lumped masses to investigate the structure irregularity effects including damping of different material, mass ratio, frequency ratio ...

  7. Synchronization of Forced damped Pendulum via Active Control ...

    African Journals Online (AJOL)

    In this paper active controllers are designed to synchronize two identical forced damped pendula. The performance of the controllers in the synchronization of the chaotic dynamics of the two pendula, resulting from different initial conditions, is investigated numerically and found to be effective. Transition from ...

  8. Damping properties of epoxy-based composite embedded with sol ...

    Indian Academy of Sciences (India)

    Piezoelectric materials are a class of useful damping materials, with which the vibra- tion energy is changed into electric energy due to the piezo- electric effect and the electric energy is dissipated as thermal energy through an external electric resistance (Sun and. Huang 2001; Edery-Azulay and Abramovich 2006; Erturk.

  9. Gravitational Radiation Damping and Evolution of the Orbit of ...

    Indian Academy of Sciences (India)

    Abstract. The influence of the gravitational radiation damping on the evolution of the orbital elements of compact binary stars is examined by using the method of perturbation. The perturbation equations with the true anomaly as an independent variable are given. This effect results in both the secular and periodic variation ...

  10. Squeeze-film damping characteristics of cantilever microresonators ...

    African Journals Online (AJOL)

    The quality factors of the system are also obtained numerically using the coupled field FE analysis software ANSYS. A comparison of the results up to the pull-in instability shows excellent agreement for damping characteristics obtained by both the semi-analytical and FE methods. The effects of large DC bias voltages on ...

  11. Gravitational Radiation Damping and Evolution of the Orbit of ...

    Indian Academy of Sciences (India)


    Jan 27, 2016 ... The influence of the gravitational radiation damping on the evolution of the orbital elements of compact binary stars is examined by using the method of perturbation. The perturbation equations with the true anomaly as an independent variable are given. This effect results in both the secular and periodic ...

  12. Susceptibility for cigarette smoke-induced DAMP release and DAMP-induced inflammation in COPD. (United States)

    Pouwels, Simon D; Hesse, Laura; Faiz, Alen; Lubbers, Jaap; Bodha, Priya K; Ten Hacken, Nick H T; van Oosterhout, Antoon J M; Nawijn, Martijn C; Heijink, Irene H


    Cigarette smoke (CS) exposure is a major risk factor for chronic obstructive pulmonary disease (COPD). We investigated whether CS-induced damage-associated molecular pattern (DAMP) release or DAMP-mediated inflammation contributes to susceptibility for COPD. Samples, including bronchial brushings, were collected from young and old individuals, susceptible and nonsusceptible for the development of COPD, before and after smoking, and used for gene profiling and airway epithelial cell (AEC) culture. AECs were exposed to CS extract (CSE) or specific DAMPs. BALB/cByJ and DBA/2J mice were intranasally exposed to LL-37 and mitochondrial (mt)DAMPs. Functional gene-set enrichment analysis showed that CS significantly increases the airway epithelial gene expression of DAMPs and DAMP receptors in COPD patients. In cultured AECs, we observed that CSE induces necrosis and DAMP release, with specifically higher galectin-3 release from COPD-derived compared with control-derived cells. Galectin-3, LL-37, and mtDAMPs increased CXCL8 secretion in AECs. LL-37 and mtDAMPs induced neutrophilic airway inflammation, exclusively in mice susceptible for CS-induced airway inflammation. Collectively, we show that in airway epithelium from COPD patients, the CS-induced expression of DAMPs and DAMP receptors in vivo and the release of galectin-3 in vitro is exaggerated. Furthermore, our studies indicate that a predisposition to release DAMPs and subsequent induction of inflammation may contribute to the development of COPD. Copyright © 2016 the American Physiological Society.

  13. Study of Temporal Effects on Subjective Video Quality of Experience. (United States)

    Bampis, Christos George; Zhi Li; Moorthy, Anush Krishna; Katsavounidis, Ioannis; Aaron, Anne; Bovik, Alan Conrad


    HTTP adaptive streaming is being increasingly deployed by network content providers, such as Netflix and YouTube. By dividing video content into data chunks encoded at different bitrates, a client is able to request the appropriate bitrate for the segment to be played next based on the estimated network conditions. However, this can introduce a number of impairments, including compression artifacts and rebuffering events, which can severely impact an end-user's quality of experience (QoE). We have recently created a new video quality database, which simulates a typical video streaming application, using long video sequences and interesting Netflix content. Going beyond previous efforts, the new database contains highly diverse and contemporary content, and it includes the subjective opinions of a sizable number of human subjects regarding the effects on QoE of both rebuffering and compression distortions. We observed that rebuffering is always obvious and unpleasant to subjects, while bitrate changes may be less obvious due to content-related dependencies. Transient bitrate drops were preferable over rebuffering only on low complexity video content, while consistently low bitrates were poorly tolerated. We evaluated different objective video quality assessment algorithms on our database and found that objective video quality models are unreliable for QoE prediction on videos suffering from both rebuffering events and bitrate changes. This implies the need for more general QoE models that take into account objective quality models, rebuffering-aware information, and memory. The publicly available video content as well as metadata for all of the videos in the new database can be found at

  14. Callosal anatomical and effective connectivity between primary motor cortices predicts visually cued bimanual temporal coordination performance. (United States)

    Wahl, Mathias; Lauterbach-Soon, Birgit; Hattingen, Elke; Hübers, Annemarie; Ziemann, Ulf


    Default in-phase coupling of hand movements needs to be suppressed when temporal coordination is required for out-of-phase bimanual movements. There is lack of knowledge on how the brain overrides these default in-phase movements to enable a required interval of activity between hands. We used a visually cued bimanual temporal coordination (vc-BTC) paradigm with a constant rhythmical time base of 1 s, to test the accuracy of in-phase and out-of-phase (0.1, 0.2,…,0.9) finger tapping. We hypothesized that (1) stronger anatomical and effective interhemispheric connectivity between the hand areas of the primary motor cortex (M1HAND) predict higher temporal offsets between hands in the out-of-phase conditions of the vc-BTC; (2) patients with relapsing-remitting multiple sclerosis (RRMS) and clinically isolated syndrome (CIS) have reduced interhemispheric connectivity and altered between-hand coupling. Anatomical connectivity was determined by fractional anisotropy of callosal hand motor fibers (FA-hCMF). Effective connectivity was probed by short interval interhemispheric inhibition (S-IHI) using paired-coil transcranial magnetic stimulation (TMS). In healthy subjects, higher FA-hCMF and S-IHI correlated with higher temporal offsets between hands in the out-of-phase conditions of the tapping test. FA-hCMF was reduced in patients with RRMS but not in CIS, while S-IHI was reduced in both patient groups. These abnormalities were associated with smaller temporal offsets between hands leading to less deviation from the required phasing in the out-of-phase tapping conditions. Findings provide multiple levels of evidence that callosal anatomical and effective connectivity between the hand areas of the motor cortices play important roles in visually cued bimanual temporal coordination performance.

  15. Effects of Age and Hearing Impairment on the Ability to Benefit from Temporal and Spectral Modulation (United States)

    Hall, Joseph W.; Buss, Emily; Grose, John H.; Roush, Patricia A.


    Objectives At poor signal-to-noise ratios, speech understanding may depend upon the ability to combine speech fragments that are distributed across time and frequency. The goal of this study was to determine the effects of development and hearing impairment on this ability. Design Listeners in the present study included adults and children with normal hearing and with hearing impairment. The children with normal hearing included a younger group (4.6 to 6.9 years of age, n=10) and an older group (7.3 to 11.1 years of age, n=11). The adults with normal hearing were 19–27 years of age (n=10). Adults (19–54 years of age, n=9) and children (7.2 to 10.7 years of age, n=8) with hearing impairment were also tested. The two groups with hearing impairment had comparable mild/moderate bilateral sensorineural hearing impairment. Masked speech reception thresholds for sentences were determined in a baseline condition of steady speech-shaped noise and in noise that was either temporally modulated, spectrally modulated, or both temporally and spectrally modulated. Results The results of normal-hearing listeners indicated higher masked speech reception thresholds for children than adults in steady noise. Adults and children showed the same magnitude of masking release for spectral modulation. Adults showed more masking release than the younger children for temporal modulation, and showed more masking release than both the younger and older children for combined temporal/spectral modulation. Comparing normal-hearing and hearing-impaired listeners, the hearing-impaired listeners had higher masked speech reception thresholds (SRTs) in the steady noise condition and reduced masking release in the modulated noise conditions. Neither the two-way interaction between age and hearing impairment nor the three-way interaction between age, hearing impairment, and masking configuration was significant. Conclusions Although the reduced masking release for temporal modulation shown by the

  16. Contrasting effects of diversity on the temporal stability of plant populations

    NARCIS (Netherlands)

    Ruijven, van J.; Berendse, F.


    Recent theoretical and empirical work suggests that diversity enhances the temporal stability of a community. However, the effect of diversity on the stability of the individual populations within the community remains unclear. Some models predict a decrease of population stability with diversity,

  17. The Effect of Temporal Intervals of Reinforcement upon Deductive and Inductive Generalizations. (United States)

    Crawford, Jack J.

    Using verbal material, this study explored the effect of the temporal interval of feedback as it interacted with two other variables: (1) method of presenting learning material (inductive or deductive), and (2) activity of the learner during the delay interval (activity relevant or irrelevant to the material). The major objective was to compare…

  18. Transport of Aquatic Contaminant and Assessment of Radioecological Exposure with Spatial and Temporal Effects (United States)

    Feng, Ying


    A comprehensive study of the radioecological exposure assessment for a contaminated aquatic ecosystem has been performed in this dissertation. The primary objectives of this research were to advance the understanding of radiation exposure in nature and to increase current capabilities for estimating aquatic radiation exposure with the consideration of spatial and temporal effect in nature. This was accomplished through the development of a two-dimensional aquatic exposure assessment framework and by applying the framework to the contaminated Chernobyl cooling lake (pond). This framework integrated spatial and temporal heterogeneity effects of contaminant concentration, abundance and distribution of ecosystem populations, spatial- and temporal-dependent (or density-dependent) radionuclide ingestion, and alternative food web structures. The exposure model was built on the population level to allow for the integration of density dependent population regulation into the exposure assessment. Plankton population dynamics have been integrated into the hydrodynamic-transport model to determine plankton biomass density changes and distributions. The distribution of contaminant in water was also calculated using a hydrodynamic-transport model. The significance of adding spatial and temporal effects, spatial and temporal related ecological functions, and hydrodynamics in the exposure assessment was illustrated through a series of case studies. The results suggested that the spatial and temporal heterogeneity effects of radioactive environments were substantial. Among the ecological functions considered, the food web structure was the most important contributor to the variations of fish exposure. The results obtained using a multiple prey food web structure differed by a factor of 20 from the equilibrium concentration, and by a factor of 2.5 from the concentration obtained using a single-prey food web. Impacts of changes in abundance and distribution of biomass on contaminant

  19. Effects of deafness and cochlear implant use on temporal response characteristics in cat primary auditory cortex. (United States)

    Fallon, James B; Shepherd, Robert K; Nayagam, David A X; Wise, Andrew K; Heffer, Leon F; Landry, Thomas G; Irvine, Dexter R F


    We have previously shown that neonatal deafness of 7-13 months duration leads to loss of cochleotopy in the primary auditory cortex (AI) that can be reversed by cochlear implant use. Here we describe the effects of a similar duration of deafness and cochlear implant use on temporal processing. Specifically, we compared the temporal resolution of neurons in AI of young adult normal-hearing cats that were acutely deafened and implanted immediately prior to recording with that in three groups of neonatally deafened cats. One group of neonatally deafened cats received no chronic stimulation. The other two groups received up to 8 months of either low- or high-rate (50 or 500 pulses per second per electrode, respectively) stimulation from a clinical cochlear implant, initiated at 10 weeks of age. Deafness of 7-13 months duration had no effect on the duration of post-onset response suppression, latency, latency jitter, or the stimulus repetition rate at which units responded maximally (best repetition rate), but resulted in a statistically significant reduction in the ability of units to respond to every stimulus in a train (maximum following rate). None of the temporal response characteristics of the low-rate group differed from those in acutely deafened controls. In contrast, high-rate stimulation had diverse effects: it resulted in decreased suppression duration, longer latency and greater jitter relative to all other groups, and an increase in best repetition rate and cut-off rate relative to acutely deafened controls. The minimal effects of moderate-duration deafness on temporal processing in the present study are in contrast to its previously-reported pronounced effects on cochleotopy. Much longer periods of deafness have been reported to result in significant changes in temporal processing, in accord with the fact that duration of deafness is a major factor influencing outcome in human cochlear implantees. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. An Optimal Reactive Power Control Strategy for a DFIG-Based Wind Farm to Damp the Sub-Synchronous Oscillation of a Power System

    Directory of Open Access Journals (Sweden)

    Bin Zhao


    Full Text Available This study presents the auxiliary damping control with the reactive power loop on the rotor-side converter of doubly-fed induction generator (DFIG-based wind farms to depress the sub-synchronous resonance oscillations in nearby turbogenerators. These generators are connected to a series capacitive compensation transmission system. First, the damping effect of the reactive power control of the DFIG-based wind farms was theoretically analyzed, and a transfer function between turbogenerator speed and the output reactive power of the wind farms was introduced to derive the analytical expression of the damping coefficient. The phase range to obtain positive damping was determined. Second, the PID phase compensation parameters of the auxiliary damping controller were optimized by a genetic algorithm to obtain the optimum damping in the entire subsynchronous frequency band. Finally, the validity and effectiveness of the proposed auxiliary damping control were demonstrated on a modified version of the IEEE first benchmark model by time domain simulation analysis with the use of DigSILENT/PowerFactory. Theoretical analysis and simulation results show that this derived damping factor expression and the condition of the positive damping can effectively analyze their impact on the system sub-synchronous oscillations, the proposed wind farms reactive power additional damping control strategy can provide the optimal damping effect over the whole sub-synchronous frequency band, and the control effect is better than the active power additional damping control strategy based on the power system stabilizator.

  1. Passive damping in EDS maglev systems.

    Energy Technology Data Exchange (ETDEWEB)

    Rote, D. M.


    There continues to be strong interest in the subjects of damping and drag forces associated with electrodynamic suspension (EDS) systems. While electromagnetic drag forces resist the forward motion of a vehicle and therefore consume energy, damping forces control, at least in part, the response of the vehicle to disturbances. Ideally, one would like to reduce the drag forces as much as possible while retaining adequate damping forces to insure dynamic stability and satisfactory ride quality. These two goals turn out to be difficult to achieve in practice. It is well known that maglev systems tend to be intrinsically under damped. Consequently it is often necessary in a practical system design to enhance the damping passively or actively. For reasons of cost and simplicity, it is desirable to rely as much as possible on passive damping mechanisms. In this paper, rough estimates are made of the passive damping and drag forces caused by various mechanisms in EDS systems. No attention will be given to active control systems or secondary suspension systems which are obvious ways to augment passive damping mechanisms if the latter prove to be inadequate.

  2. Damping-off in forest nurseries (United States)

    Carl Hartley


    Damping-off is the commonest English name for a symptomatic group of diseases affecting great numbers of plant species of widely separated phylogenetic groups. It is commonly used for any disease which results in the rapid decay of young succulent seedlings or soft cuttings. Young shoots from underground rootstocks may also be damped-off before they break through the...

  3. DAMPs from death to new life

    Directory of Open Access Journals (Sweden)

    Emilie eVénéreau


    Full Text Available Our body handles tissue damage by activating the immune system in response to intracellularmolecules released by injured tissues (Damage-Associated Molecular Patterns, DAMPs, in a similar way as it detects molecular motifs conserved in pathogens (pathogen-associated molecular patterns, PAMPs. DAMPs are molecules that have a physiological role inside the cell, but acquire additional functions when they are released outside the cell: they alert the body about danger, stimulate an inflammatory response, and finally promote the regeneration process. Beside their passive release by dead cells, some DAMPs can be secreted or exposed by living cells undergoing a life-threatening stress. DAMPs have been linked to inflammation and related disorders: hence, inhibition of DAMP-mediated inflammatory responses is a promising strategy to improve the clinical management of infection- and injury-elicited inflammatory diseases. However, it is important to consider that DAMPs are not only danger signals but also central players in tissue repair. Indeed, some DAMPs have been studied for their role in tissue healing after sterile or infection-associated inflammation. This review is focused on two exemplary DAMPs, HMGB1 and ATP, and their contribution to both inflammation and tissue repair.

  4. Modified Composite Struts Would Damp Vibrations (United States)

    Chen, Gun-Shing; Dolgin, Benjamin P.


    Composite-material (fiber/matrix laminate) struts damping longitudinal vibrations fabricated more easily in proposed new design. Prior design described in "Composite Struts Would Damp Vibrations" (NPO-17914). New design similar except pattern of fibers includes rounded bends (instead of sharp bends) in fibers.

  5. On Collisionless Damping of Ion Acoustic Waves

    DEFF Research Database (Denmark)

    Jensen, Vagn Orla; Petersen, P.I.


    Exact theoretical treatments show that the damping of ion acoustic waves in collisionless plasmas does not vanish when the derivative of the undisturbed distribution function at the phase velocity equals zero.......Exact theoretical treatments show that the damping of ion acoustic waves in collisionless plasmas does not vanish when the derivative of the undisturbed distribution function at the phase velocity equals zero....

  6. Bending rate damping in elastic systems (United States)

    Banks, H. T.; Wang, Y.; Fabiano, R. H.


    Preliminary results of an investigation of the bending rate damping model for elastic structures are presented. A model for which the internal damping term is physically plausible and which can accomodate cantilevered boundary conditions is discussed. The model formulation and mathematical foundations are given, and numerical results are discussed.

  7. A Novel DFIG Damping Control for Power System with High Wind Power Penetration

    Directory of Open Access Journals (Sweden)

    Aiguo Tan


    Full Text Available Aiming at the fact that large-scale penetration of wind power will to some extent weaken the small signal stability of power systems, in this paper, the dynamic model of a doubly fed induction generator (DFIG is established firstly, to analyze the impact of wind generation on power oscillation damping. Then, based on the conventional maximum power point tracking control of variable speed wind turbine, a supplementary control scheme is proposed to increase the damping of power system. To achieve best performance, parameters of the damping control are tuned by using a genetic algorithm. Results of eigenvalue analysis and simulations demonstrate the effectiveness of supplementary damping control with fixed wind speed. At last, due to the problem that fluctuation of output power of wind generators would cause the unstable performance of the DFIG damping controller above, a new algorithm that adapts to the wind variation is added to the supplementary damping control scheme. Results of the simulation show that an improved damping control scheme can stably enhance system damping under various wind speeds and has higher practical value.

  8. Choke-mode damped structure design for the Compact Linear Collider main linac

    Directory of Open Access Journals (Sweden)

    Hao Zha


    Full Text Available Choke-mode damped structures are being studied as an alternative design to waveguide damped structures for the main linac of the Compact Linear Collider (CLIC. Choke-mode structures have the potential for lower pulsed temperature rise and simpler and less expensive fabrication. An equivalent circuit model based on transmission line theory for higher-order-mode damping is presented. Using this model, a new choke geometry is proposed and the wakefield performance is verified using Gdfidl. This structure has a comparable wakefield damping effect to the baseline design which uses waveguide damping. A prototype structure with the same iris dimensions and accelerating gradient as the nominal CLIC design, but with the new choke geometry, has been designed for high-power tests.

  9. TCSC Nonlinear Adaptive Damping Controller Design Based on RBF Neural Network to Enhance Power System Stability

    DEFF Research Database (Denmark)

    Yao, Wei; Fang, Jiakun; Zhao, Ping


    the characteristics of the conventional PID, but adjust the parameters of PID controller online using identified Jacobian information from RBFNN. Hence, it has strong adaptability to the variation of the system operating condition. The effectiveness of the proposed controller is tested on a two-machine five-bus power......In this paper, a nonlinear adaptive damping controller based on radial basis function neural network (RBFNN), which can infinitely approximate to nonlinear system, is proposed for thyristor controlled series capacitor (TCSC). The proposed TCSC adaptive damping controller can not only have...... system and a four-machine two-area power system under different operating conditions in comparison with the lead-lag damping controller tuned by evolutionary algorithm (EA). Simulation results show that the proposed damping controller achieves good robust performance for damping the low frequency...

  10. Dynamic Stiffness and Damping Characteristics of a High-Temperature Air Foil Journal Bearing (United States)

    Howard, Samuel A.; DellaCorte, Christopher; Valco, Mark J.; Prahl, Joseph M.; Heshmat, Hooshang


    Using a high-temperature optically based displacement measurement system, a foil air bearing's stiffness and damping characteristics were experimentally determined. Results were obtained over a range of modified Sommerfeld Number from 1.5E6 to 1.5E7, and at temperatures from 25 to 538 C. An Experimental procedure was developed comparing the error in two curve fitting functions to reveal different modes of physical behavior throughout the operating domain. The maximum change in dimensionless stiffness was 3.0E-2 to 6.5E-2 over the Sommerfeld Number range tested. Stiffness decreased with temperature by as much as a factor of two from 25 to 538 C. Dimensionless damping was a stronger function of Sommerfeld Number ranging from 20 to 300. The temperature effect on damping being more qualitative, showed the damping mechanism shifted from viscous type damping to frictional type as temperature increased.

  11. Collisionless damping of dust-acoustic waves in a charge varying dusty plasma with nonextensive ions

    International Nuclear Information System (INIS)

    Amour, Rabia; Tribeche, Mouloud


    The charge variation induced nonlinear dust-acoustic wave damping in a charge varying dusty plasma with nonextensive ions is considered. It is shown that the collisionless damping due to dust charge fluctuation causes the nonlinear dust acoustic wave propagation to be described by a damped Korteweg-de Vries (dK-dV) equation the coefficients of which depend sensitively on the nonextensive parameter q. The damping term, solely due to the dust charge variation, is affected by the ion nonextensivity. For the sake of completeness, the possible effects of nonextensivity and collisionless damping on weakly nonlinear wave packets described by the dK-dV equation are succinctly outlined by deriving a nonlinear Schrödinger-like equation with a complex nonlinear coefficient

  12. Collisionless damping of dust-acoustic waves in a charge varying dusty plasma with nonextensive ions

    Energy Technology Data Exchange (ETDEWEB)

    Amour, Rabia; Tribeche, Mouloud [Faculty of Physics, Theoretical Physics Laboratory (TPL), Plasma Physics Group (PPG), University of Bab-Ezzouar, USTHB, B.P. 32, El Alia, Algiers 16111 (Algeria)


    The charge variation induced nonlinear dust-acoustic wave damping in a charge varying dusty plasma with nonextensive ions is considered. It is shown that the collisionless damping due to dust charge fluctuation causes the nonlinear dust acoustic wave propagation to be described by a damped Korteweg-de Vries (dK-dV) equation the coefficients of which depend sensitively on the nonextensive parameter q. The damping term, solely due to the dust charge variation, is affected by the ion nonextensivity. For the sake of completeness, the possible effects of nonextensivity and collisionless damping on weakly nonlinear wave packets described by the dK-dV equation are succinctly outlined by deriving a nonlinear Schrödinger-like equation with a complex nonlinear coefficient.

  13. Engineering design and fabrication of tapered damped X-Band accelerating structures

    CERN Document Server

    Solodko, A; Gudkov, D; Riddone, G; Grudiev, A; Atieh, S; Taborelli, M


    The accelerating structures (AS) are one of the main components of the Compact LInear Collider (CLIC), under study at CERN. Each accelerating structure contains about 30 copper discs, which form the accelerating cavity. The requirements of different technical systems, such as vacuum and cooling, have to be considered during the engineering design. A fully featured AS is very challenging and requires several technologies. Different damping methods, waveguides, vacuum manifolds, slots and chokes, result in various design configurations. In the CLIC AS each cell is damped by means of four waveguides coupled to the cell. The vacuum manifolds combine a number of functions such as damping, vacuum pumping and cooling. A silicon carbide absorber, fixed inside of each manifold, is required for effective damping of Higher Order Modes (HOMs). This paper describes the engineering design of the X-band AS with damping material, and focuses on few technical solutions.

  14. Choke-mode damped structure design for the Compact Linear Collider main linac

    CERN Document Server

    Zha, Hao; Grudiev, Alexej; Huang, Wenhui; Shi, Jiaru; Tang, Chuanxiang; Wuensch, Walter


    Choke-mode damped structures are being studied as an alternative design to waveguide damped structures for the main linac of the Compact Linear Collider (CLIC). Choke-mode structures have the potential for lower pulsed temperature rise and simpler and less expensive fabrication. An equivalent circuit model based on transmission line theory for higher-order-mode damping is presented. Using this model, a new choke geometry is proposed and the wakefield performance is verified using GDFIDL. This structure has a comparable wakefield damping effect to the baseline design which uses waveguide damping. A prototype structure with the same iris dimensions and accelerating gradient as the nominal CLIC design, but with the new choke geometry, has been designed for high-power tests. DOI: 10.1103/PhysRevSTAB.15.122003

  15. Quantitative analysis of the thermal damping of coherent axion oscillations

    International Nuclear Information System (INIS)

    Turner, M.S.


    Unruh and Wald have recently discussed a new mechanism for damping coherent axion oscillations, ''thermal damping,'' which occurs due to the temperature dependence of the axion mass and neutrino viscosity. We investigate the effect quantitatively and find that the present energy density in axions can be written as rho/sub a/ = rho/sub a0//(1+J/sub UW/), where rho/sub a/0 is what the axion energy density would be in the absence of the thermal-damping effect and J/sub UW/ is an integral whose integrand depends upon (dm/sub a//dT) 2 . As a function of f(equivalentPeccei-Quinn symmetry-breaking scale) J/sub UW/ achieves its maximum value for f/sub PQ/approx. =3 x 10 12 GeV; unless the axion mass turn-on is very sudden, Vertical Bar(T/m/sub a/)(dm/sub a//dT)Vertical Bar>>1, J/sub UW/ is <<1, implying that this damping mechanism is not significant

  16. Identification of Damping from Structural Vibrations

    DEFF Research Database (Denmark)

    Bajric, Anela

    Reliable predictions of the dynamic loads and the lifetime of structures are influenced by the limited accuracy concerning the level of structural damping. The mechanisms of damping cannot be derived analytically from first principles, and in the design of structures the damping is therefore based....... This expression can be incorporated into an output-only system identification technique as well as in traditional experimental modal analysis techniques. The identified damping matrix is of high accuracy and yields a real-valued symmetric matrix from simulations. It is furthermore shown, by measurements of a model......-scale five-story shear building, that the estimated complex-valued mode shapes are reproducible and their convergence concerning the measurement duration validates that the non-classical damping matrix can be re-constructed robustly by estimating the complex-valued modal parameters of dynamic structures...

  17. Overview on methods for formulating explicit damping matrices for non-classically damped structures

    International Nuclear Information System (INIS)

    Xu, J.


    In computing the dynamic response of a connected system with multiple components having dissimilar damping characteristics, which is often referred to as nonclassically damped system such as nuclear power plant piping systems supported by stiff structures, one needs to define the system-level damping based upon the damping information of components. This is frequently done in practice using approximate methods expressed as composite modal damping with weighting functions. However, when the difference in damping among components is substantial, the composite modal damping may become inappropriate in the characterization of the damping behavior of such systems. In recent years, several new methods have emerged with the expectation that they could produce more exact system-level damping for a group of nonclassically damped structures which are comprised of components that possess classical modal damping. In this paper, an overview is presented to examine these methods in the light of their theoretical basis, the technical merits, and practical applications. To this end, a synthesis method is described, which was shown to reduce to the other methods in the literature

  18. Exploring damping characteristics of composite tower of cable ...

    Indian Academy of Sciences (India)


    ]. Characterization of damping forces in a vibrating structure has long been an active area of research in structural dynamics [5, 6, 11–18]. There are many situations in which the un-damped and classically damped assumptions are invalid.

  19. Magnetic Damping of Solid Solution Semiconductor Alloys (United States)

    Szofran, Frank R.; Benz, K. W.; Croell, Arne; Dold, Peter; Cobb, Sharon D.; Volz, Martin P.; Motakef, Shariar


    The objective of this study is to: (1) experimentally test the validity of the modeling predictions applicable to the magnetic damping of convective flows in electrically conductive melts as this applies to the bulk growth of solid solution semiconducting materials; and (2) assess the effectiveness of steady magnetic fields in reducing the fluid flows occurring in these materials during processing. To achieve the objectives of this investigation, we are carrying out a comprehensive program in the Bridgman and floating-zone configurations using the solid solution alloy system Ge-Si. This alloy system has been studied extensively in environments that have not simultaneously included both low gravity and an applied magnetic field. Also, all compositions have a high electrical conductivity, and the materials parameters permit reasonable growth rates. An important supporting investigation is determining the role, if any, that thermoelectromagnetic convection (TEMC) plays during growth of these materials in a magnetic field. TEMC has significant implications for the deployment of a Magnetic Damping Furnace in space. This effect will be especially important in solid solutions where the growth interface is, in general, neither isothermal nor isoconcentrational. It could be important in single melting point materials, also, if faceting takes place producing a non-isothermal interface. In conclusion, magnetic fields up to 5 Tesla are sufficient to eliminate time-dependent convection in silicon floating zones and possibly Bridgman growth of Ge-Si alloys. In both cases, steady convection appears to be more significant for mass transport than diffusion, even at 5 Tesla in the geometries used here. These results are corroborated in both growth configurations by calculations.

  20. Effect of the temporal pattern of contralateral inhibition on sound localization cues. (United States)

    Marsat, Gary; Pollack, Gerald S


    We studied the temporal coding properties of identified interneurons in the auditory system of crickets, using information theory as an analytical tool. The ascending neuron 1 (AN1), which is tuned to the dominant carrier frequency (CF) of cricket songs, selectively codes the limited range of amplitude modulation (AM) frequencies that occur in these signals. AN2, which is most sensitive to the ultrasonic frequencies that occur in echolocation calls of insectivorous bats, codes a broader range of AM frequencies, as occur in bat calls. A third neuron, omega neuron 1 (ON1), which is dually tuned to both ranges of carrier frequency, was shown previously to have CF-specific coding properties, allowing it to represent accurately the differing temporal structures of both cricket songs and bat calls. ON1 is a source of contralateral inhibition to AN1 and AN2, enhancing binaural contrast and facilitating sound localization. We used dichotic stimulation to examine the importance of the temporal structure of contralateral inhibition for enhancing binaural contrast. Contralateral inhibition degrades the coding of temporal pattern by AN1 and AN2, but only if the temporal pattern of inhibitory input matches that of excitation. Firing rate is also decreased most strongly by temporally matched contralateral inhibition. This is apparent for AN1 in its mean firing rate; for AN2, high-frequency firing is selectively suppressed. Our results show that the CF-specific coding properties of ON1 allow this single neuron to enhance effectively localization cues for both cricket-like and bat-like acoustic signals.

  1. Evolution of spatio-temporal drought characteristics: validation, projections and effect of adaptation scenarios (United States)

    Vidal, J.-P.; Martin, E.; Kitova, N.; Najac, J.; Soubeyroux, J.-M.


    Drought events develop in both space and time and they are therefore best described through summary joint spatio-temporal characteristics, such as mean duration, mean affected area and total magnitude. This paper addresses the issue of future projections of such characteristics of drought events over France through three main research questions: (1) Are downscaled climate projections able to simulate spatio-temporal characteristics of meteorological and agricultural droughts in France over a present-day period? (2) How such characteristics will evolve over the 21st century? (3) How to use standardized drought indices to represent theoretical adaptation scenarios? These questions are addressed using the Isba land surface model, downscaled climate projections from the ARPEGE General Circulation Model under three emissions scenarios, as well as results from a previously performed 50-yr multilevel and multiscale drought reanalysis over France. Spatio-temporal characteristics of meteorological and agricultural drought events are computed using the Standardized Precipitation Index and the Standardized Soil Wetness Index, respectively, and for time scales of 3 and 12 months. Results first show that the distributions of joint spatio-temporal characteristics of observed events are well simulated by the downscaled hydroclimate projections over a present-day period. All spatio-temporal characteristics of drought events are then found to dramatically increase over the 21st century, with stronger changes for agricultural droughts. Two theoretical adaptation scenarios are eventually built based on hypotheses of adaptation to evolving climate and hydrological normals, either retrospective or prospective. The perceived spatio-temporal characteristics of drought events derived from these theoretical adaptation scenarios show much reduced changes, but they call for more realistic scenarios at both the catchment and national scale in order to accurately assess the combined effect of

  2. Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Prealloyed Cu-Al-Ni Shape Memory Alloys. (United States)

    Saud, Safaa N; Hamzah, E; Bakhsheshi-Rad, H R; Abubakar, T


    The influence of Ta additions on the microstructure and properties of Cu-Al-Ni shape memory alloys was investigated in this paper. The addition of Ta significantly affects the green and porosity densities; the minimum percentage of porosity was observed with the modified prealloyed Cu-Al-Ni-2.0 wt.% Ta. The phase transformation temperatures were shifted towards the highest values after Ta was added. Based on the damping capacity results, the alloy of Cu-Al-Ni-3.0 wt.% Ta has very high internal friction with the maximum equivalent internal friction value twice as high as that of the prealloyed Cu-Al-Ni SMA. Moreover, the prealloyed Cu-Al-Ni SMAs with the addition of 2.0 wt.% Ta exhibited the highest shape recovery ratio in the first cycle (i.e., 100% recovery), and when the number of cycles is increased, this ratio tends to decrease. On the other hand, the modified alloys with 1.0 and 3.0 wt.% Ta implied a linear increment in the shape recovery ratio with increasing number of cycles. Polarization tests in NaCl solution showed that the corrosion resistance of Cu-Al-Ni-Ta SMA improved with escalating Ta concentration as shown by lower corrosion current densities, higher corrosion potential, and formation of stable passive film.

  3. The effect of temporal structure on rustling-sound detection in the gleaning bat, Megaderma lyra. (United States)

    Hübner, M; Wiegrebe, L


    For a gleaning bat hunting prey from the ground, rustling sounds generated by prey movements are essential to invoke a hunting behaviour. The detection of prey-generated rustling sounds may depend heavily on the time structure of the prey-generated and the masking sounds due to their spectral similarity. Here, we systematically investigate the effect of the temporal structure on psychophysical rustling-sound detection in the gleaning bat, Megaderma lyra. A recorded rustling sound serves as the signal; the maskers are either Gaussian noise or broadband noise with various degrees of envelope fluctuations. Exploratory experiments indicate that the selective manipulation of the temporal structure of the rustling sound does not influence its detection in a Gaussian-noise masker. The results of the main experiment show, however, that the temporal structure of the masker has a strong and systematic effect on rustling-sound detection: When the width of irregularly spaced gaps in the masker exceeded about 0.3 ms, rustling-sound detection improved monotonically with increasing gap duration. Computer simulations of this experiment reveal that a combined detection strategy of spectral and temporal analysis underlies rustling-sound detection with fluctuating masking sounds.

  4. Influences of Deqi on Immediate Analgesia Effect of Needling SP6 (Sanyinjiao in Patients with Primary Dysmenorrhea in Cold and Dampness Stagnation Pattern: Study Protocol for a Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Yu-qi Liu


    Full Text Available Deqi, according to traditional Chinese medicine, is a specific needle sensation during the retention of needles at certain acupoints and is considered to be necessary to produce therapeutic effects from acupuncture. Although some modern researches have showed that Deqi is essential for producing acupuncture analgesia and anesthesia, the data are not enough. It is a paper of a multicenter, randomized controlled study protocol, to evaluate the influences of Deqi on acupuncture SP6 in Cold and Dampness Stagnation pattern primary dysmenorrhea patients, in terms of reducing pain and anxiety, and to find out the relationship between Deqi and the temperature changes at SP6 (Sanyinjiao and CV4 (Guanyuan. The results of this trial will be helpful to explain the role of Deqi in acupuncture analgesia and may provide a new objective index for measuring Deqi in the future study. This trial is registered with ChiCTR-TRC-13003086.

  5. Frequency and temperature dependence of high damping elastomers

    International Nuclear Information System (INIS)

    Kulak, R.F.; Hughes, T.H.


    High damping steel-laminated elastomeric seismic isolation bearings are one of the preferred devices for isolating large buildings and structures. In the US, the current reference design for the Advanced Liquid Metal Reactor (ALMR) uses laminated bearings for seismic isolation. These bearings are constructed from alternating layers of high damping rubber and steel plates. They are typically designed for shear strains between 50 and 100% and are expected to sustain two to three times these levels for beyond design basis loading conditions. Elastomeric bearings are currently designed to provide a system frequency between 0.4 and 0.8 Hz and expected to operate between -20 and 40 degrees Centigrade. To assure proper performance of isolation bearings, it is necessary to characterize the elastomer's response under expected variations of frequency and temperature. The dynamic response of the elastomer must be characterized within the frequency range that spans the bearing acceptance test frequency, which may be as low as 0.005 Hz, and the design frequency. Similarly, the variation in mechanical characteristics of the elastomer must be determined over the design temperature range, which is between -20 and 40 degrees Centigrade. This paper reports on (1) the capabilities of a testing facility at ANL for testing candidate elastomers, (2) the variation with frequency and temperature of the stiffness and damping of one candidate elastomer, and (3) the effect of these variations on bearing acceptance testing criteria and on the choice of bearing design values for stiffness and damping

  6. Frequency and temperature dependence of high damping elastomers

    Energy Technology Data Exchange (ETDEWEB)

    Kulak, R.F.; Hughes, T.H.


    High damping steel-laminated elastomeric seismic isolation bearings are one of the preferred devices for isolating large buildings and structures. In the US, the current reference design for the Advanced Liquid Metal Reactor (ALMR) uses laminated bearings for seismic isolation. These bearings are constructed from alternating layers of high damping rubber and steel plates. They are typically designed for shear strains between 50 and 100% and are expected to sustain two to three times these levels for beyond design basis loading conditions. Elastomeric bearings are currently designed to provide a system frequency between 0.4 and 0.8 Hz and expected to operate between {minus}20 and 40 degrees Centigrade. To assure proper performance of isolation bearings, it is necessary to characterize the elastomer`s response under expected variations of frequency and temperature. The dynamic response of the elastomer must be characterized within the frequency range that spans the bearing acceptance test frequency, which may be as low as 0.005 Hz, and the design frequency. Similarly, the variation in mechanical characteristics of the elastomer must be determined over the design temperature range, which is between {minus}20 and 40 degrees Centigrade. This paper reports on (1) the capabilities of a testing facility at ANL for testing candidate elastomers, (2) the variation with frequency and temperature of the stiffness and damping of one candidate elastomer, and (3) the effect of these variations on bearing acceptance testing criteria and on the choice of bearing design values for stiffness and damping.

  7. Fluid Surface Damping: A Technique for Vibration Suppression of Beams

    Directory of Open Access Journals (Sweden)

    Hany Ghoneim


    Full Text Available A fluid surface damping (FSD technique for vibration suppression of beamlikestructures is proposed. The technique is a modification of the surface layer damping method. Two viscoelastic surface layers containing fluid-filled cavities are attached symmetrically to the opposite surfaces of the beam. The cavities on one side are attached to the corresponding cavities on the other side via connection passages. As the beam vibrates, the fluid is pumped back and forth through the connecting passages. Therefore, in addition to the viscoelastic damping provided by the surface layers, the technique offers viscous damping due to the fluid flow through the passage. A mathematical model for the proposed technique is developed, normalized, and solved in the frequency domain to investigate the effect of various parameters on the vibration suppression of a cantilever beam. The steady-state frequency response for a base white-noise excitation is calculated at the beam's free tip and over a frequency range containing the first five resonant frequencies. The parameters investigated are the flow-through passage viscous resistance, the length and location of the layers, the hydraulic capacitance of the fluid-filled cavities, and inertia of the moving fluid (hydraulic inertance. Results indicate that the proposed technique has promising potential in the field of vibration suppression of beamlike structures. With two FSD elements, all peak vibration amplitudes can be well suppressed over the entire frequency spectrum studied.

  8. Transverse wakefield of waveguide damped structures and beam dynamics

    International Nuclear Information System (INIS)

    Lin, X.


    In the design of new high energy particle colliders with higher luminosity one is naturally led to consider multi-bunch operation. However, the passage of a leading bunch through an accelerator cavity Generates a wakefield that may have a deleterious effect on the motion of the subsequent bunches. Therefore, the suppression of the wakefield is an essential requirement for beam stability. One solution to this problem, which has been studied extensively is to drain the wakefield energy out of the cavity by means of waveguides coupled with the cavity and fed into matched terminations. Waveguide dimensions are chosen to yield a cutoff frequency well above the frequency of the accelerating mode so that the latter is undamped. This paper presents a thorough investigation of the wakefield for this configuration. The effectiveness of waveguide damping has typically been assessed by evaluating the resultant Q ext of higher order cavity modes to determine their exponential damping rate. We have developed an efficient method to calculate Q ext of the damped modes from popular computer simulation codes such as MAFIA. This method has been successively applied to the B-factory RF cavity We have also found another type of wakefield, associated with waveguide cut-off, which decays as t -3/2 rather than in the well-known exponentially damped manner. Accordingly, we called it the persistent Wakefield. A similar phenomenon with essentially the same physical origin but occurring in the decay of unstable quantum states, has received extensive study. Then we have developed various methods of calculating this persistent wakefield, including mode matching and computer simulation. Based on a circuit model we estimate the limit that waveguide damping can reach to reduce the wakefield

  9. Transverse wakefield of waveguide damped structures and beam dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Xintian [Univ. of California, San Diego, CA (United States)


    In the design of new high energy particle colliders with higher luminosity one is naturally led to consider multi-bunch operation. However, the passage of a leading bunch through an accelerator cavity Generates a wakefield that may have a deleterious effect on the motion of the subsequent bunches. Therefore, the suppression of the wakefield is an essential requirement for beam stability. One solution to this problem, which has been studied extensively is to drain the wakefield energy out of the cavity by means of waveguides coupled with the cavity and fed into matched terminations. Waveguide dimensions are chosen to yield a cutoff frequency well above the frequency of the accelerating mode so that the latter is undamped. This paper presents a thorough investigation of the wakefield for this configuration. The effectiveness of waveguide damping has typically been assessed by evaluating the resultant Qext of higher order cavity modes to determine their exponential damping rate. We have developed an efficient method to calculate Qext of the damped modes from popular computer simulation codes such as MAFIA. This method has been successively applied to the B-factory RF cavity We have also found another type of wakefield, associated with waveguide cut-off, which decays as t-3/2 rather than in the well-known exponentially damped manner. Accordingly, we called it the persistent Wakefield. A similar phenomenon with essentially the same physical origin but occurring in the decay of unstable quantum states, has received extensive study. Then we have developed various methods of calculating this persistent wakefield, including mode matching and computer simulation. Based on a circuit model we estimate the limit that waveguide damping can reach to reduce the wakefield.

  10. Parameter identification in a generalized time-harmonic Rayleigh damping model for elastography.

    Directory of Open Access Journals (Sweden)

    Elijah E W Van Houten

    Full Text Available The identifiability of the two damping components of a Generalized Rayleigh Damping model is investigated through analysis of the continuum equilibrium equations as well as a simple spring-mass system. Generalized Rayleigh Damping provides a more diversified attenuation model than pure Viscoelasticity, with two parameters to describe attenuation effects and account for the complex damping behavior found in biological tissue. For heterogeneous Rayleigh Damped materials, there is no equivalent Viscoelastic system to describe the observed motions. For homogeneous systems, the inverse problem to determine the two Rayleigh Damping components is seen to be uniquely posed, in the sense that the inverse matrix for parameter identification is full rank, with certain conditions: when either multi-frequency data is available or when both shear and dilatational wave propagation is taken into account. For the multi-frequency case, the frequency dependency of the elastic parameters adds a level of complexity to the reconstruction problem that must be addressed for reasonable solutions. For the dilatational wave case, the accuracy of compressional wave measurement in fluid saturated soft tissues becomes an issue for qualitative parameter identification. These issues can be addressed with reasonable assumptions on the negligible damping levels of dilatational waves in soft tissue. In general, the parameters of a Generalized Rayleigh Damping model are identifiable for the elastography inverse problem, although with more complex conditions than the simpler Viscoelastic damping model. The value of this approach is the additional structural information provided by the Generalized Rayleigh Damping model, which can be linked to tissue composition as well as rheological interpretations.

  11. Collapse of solitary excitations in the nonlinear Schrödinger equation with nonlinear damping and white noise

    DEFF Research Database (Denmark)

    Christiansen, Peter Leth; Gaididei, Yuri Borisovich; Rasmussen, Kim


    We study the effect of adding noise and nonlinear damping in the two-dimensional nonlinear Schrodinger equation (NLS). Using a collective approach, we find that for initial conditions where total collapse occurs in the unperturbed NLS, the presence of the damping term will instead in an exponenti......We study the effect of adding noise and nonlinear damping in the two-dimensional nonlinear Schrodinger equation (NLS). Using a collective approach, we find that for initial conditions where total collapse occurs in the unperturbed NLS, the presence of the damping term will instead...

  12. Temporal coordination in joint music performance: effects of endogenous rhythms and auditory feedback. (United States)

    Zamm, Anna; Pfordresher, Peter Q; Palmer, Caroline


    Many behaviors require that individuals coordinate the timing of their actions with others. The current study investigated the role of two factors in temporal coordination of joint music performance: differences in partners' spontaneous (uncued) rate and auditory feedback generated by oneself and one's partner. Pianists performed melodies independently (in a Solo condition), and with a partner (in a duet condition), either at the same time as a partner (Unison), or at a temporal offset (Round), such that pianists heard their partner produce a serially shifted copy of their own sequence. Access to self-produced auditory information during duet performance was manipulated as well: Performers heard either full auditory feedback (Full), or only feedback from their partner (Other). Larger differences in partners' spontaneous rates of Solo performances were associated with larger asynchronies (less effective synchronization) during duet performance. Auditory feedback also influenced temporal coordination of duet performance: Pianists were more coordinated (smaller tone onset asynchronies and more mutual adaptation) during duet performances when self-generated auditory feedback aligned with partner-generated feedback (Unison) than when it did not (Round). Removal of self-feedback disrupted coordination (larger tone onset asynchronies) during Round performances only. Together, findings suggest that differences in partners' spontaneous rates of Solo performances, as well as differences in self- and partner-generated auditory feedback, influence temporal coordination of joint sensorimotor behaviors.

  13. Shape memory alloys as damping materials

    International Nuclear Information System (INIS)

    Humbeeck, J. van


    Shape memory alloys are gaining an increased interest as passive as well as active damping materials. This damping ability when applied in structural elements can lead to a better noise control, improved life time and even better performance of the envisaged tools. By passive damping, it is understood that the material converts a significant part of unwanted mechanical energy into heat. This mechanical energy can be a (resonance) vibration, impact loading or shock waves. This high damping capacity finds its origin in the thermoelastic martensitic phase due to the hysteretic mobility of martensite-variants or different phase interfaces. The damping capacity increases with increasing amplitude of the applied vibration or impact and is almost frequency independent. Special interest exists moreover for damping extreme large displacements by applying the mechanical hysteresis performed during pseudoelastic loading. This aspect is nowadays very strongly studied as a tool for protecting buildings against earthquakes in seismic active regions. Active damping can be obtained in hybrid composites by controlling the recovery stresses or strains of embedded shape memory alloy wires. This controls the internal energy fo a structure which allows controlled modal modification and tuning of the dynamical properties of structural elements. But also impact damage, acoustic radiation, dynamic shape control can be actively controlled. As a consequence improved fatigue-resistance, better performance and a longer lifetime of the structural elements can be obtained. (orig.)

  14. Grazing weakens temporal stabilizing effects of diversity in the Eurasian steppe. (United States)

    Ren, Haiyan; Taube, Friedhelm; Stein, Claudia; Zhang, Yingjun; Bai, Yongfei; Hu, Shuijin


    Many biodiversity experiments have demonstrated that plant diversity can stabilize productivity in experimental grasslands. However, less is known about how diversity-stability relationships are mediated by grazing. Grazing is known for causing species losses, but its effects on plant functional groups (PFGs) composition and species asynchrony, which are closely correlated with ecosystem stability, remain unclear. We conducted a six-year grazing experiment in a semi-arid steppe, using seven levels of grazing intensity (0, 1.5, 3.0, 4.5, 6.0, 7.5, and 9.0 sheep per hectare) and two grazing systems (i.e., a traditional, continuous grazing system during the growing period (TGS), and a mixed one rotating grazing and mowing annually (MGS)), to examine the effects of grazing system and grazing intensity on the abundance and composition of PFGs and diversity-stability relationships. Ecosystem stability was similar between mixed and continuous grazing treatments. However, within the two grazing systems, stability was maintained through different pathways, that is, along with grazing intensity, persistence biomass variations in MGS, and compensatory interactions of PFGs in their biomass variations in TGS. Ecosystem temporal stability was not decreased by species loss but rather remain unchanged by the strong compensatory effects between PFGs, or a higher grazing-induced decrease in species asynchrony at higher diversity, and a higher grazing-induced increase in the temporal variation of productivity in diverse communities. Ecosystem stability of aboveground net primary production was not related to species richness in both grazing systems. High grazing intensity weakened the temporal stabilizing effects of diversity in this semi-arid grassland. Our results demonstrate that the productivity of dominant PFGs is more important than species richness for maximizing stability in this system. This study distinguishes grazing intensity and grazing system from diversity effects on

  15. Charged-particle incoherent-motion damping in storage rings by means of dissipative elements

    International Nuclear Information System (INIS)

    Derbenev, Ya.S.; Khejfets, S.A.


    In consecutive order a possibility of damping of beam incoherent oscillations in a storage ring was studied by means of an external dissipative system in a sufficient common case. It is shown, that a useful effect, as for the case of electron cooling, is one-particle effect of particle oscillations damping due to nonconservatism of its interaction with an external system. Each other mutual influence through the external system becomes significant with increasing beam density and results in the limitation to achievable damping decrements

  16. Search for spatial and temporal collective effects in the ANTARES neutrino telescope data

    Directory of Open Access Journals (Sweden)

    Coleiro Alexis


    Full Text Available We investigate potential collective effects in the spatial and temporal domains in ANTARES data sets. On the one hand, we apply a two-point correlation analysis to look for inhomogeneities in the arrival directions of the high energy muon neutrino candidates detected between 2007 and 2012. This enables us to provide constraints on models of a population of point sources too faint to be detected by a likelihood-based method. On the other hand, we perform a search for ANTARES neutrino events in temporal coincidence with IceCube High-Energy Starting Events located within 45∘ from the Galactic Center. This study, also based on a two-point correlation function, is sensitive to transient emission and does not a prior on either the burst timing structure or on the electromagnetic emission. Therefore, it provides an effective way to acquire information on the possible origin of the IceCube astrophysical signal from transient sources.

  17. Contrasting effects of vocabulary knowledge on temporal and parietal brain structure across lifespan. (United States)

    Richardson, Fiona M; Thomas, Michael S C; Filippi, Roberto; Harth, Helen; Price, Cathy J


    Using behavioral, structural, and functional imaging techniques, we demonstrate contrasting effects of vocabulary knowledge on temporal and parietal brain structure in 47 healthy volunteers who ranged in age from 7 to 73 years. In the left posterior supramarginal gyrus, vocabulary knowledge was positively correlated with gray matter density in teenagers but not adults. This region was not activated during auditory or visual sentence processing, and activation was unrelated to vocabulary skills. Its gray matter density may reflect the use of an explicit learning strategy that links new words to lexical or conceptual equivalents, as used in formal education and second language acquisition. By contrast, in left posterior temporal regions, gray matter as well as auditory and visual sentence activation correlated with vocabulary knowledge throughout lifespan. We propose that these effects reflect the acquisition of vocabulary through context, when new words are learnt within the context of semantically and syntactically related words.

  18. Landau damping via the harmonic sextupole

    Directory of Open Access Journals (Sweden)

    Lidia Tosi


    Full Text Available Multibunch instabilities of a storage ring electron beam occur due to coherent particle oscillations generated through a bunch to bunch coupling via the impedances, deteriorating the beam quality. One cure for multibunch instabilities is Landau damping, i.e., introducing a spread in the oscillation frequencies among the particles of the individual bunches in order to destroy the coherence of the coupled multibunch oscillation. Measurements at ELETTRA have shown that the harmonic sextupole provides Landau damping capable of suppressing transverse multibunch instabilities. The damping is induced by the nonlinear tune spread with amplitude among the electrons within the individual bunches.

  19. A Resonant Damping Study Using Piezoelectric Materials (United States)

    Min, J. B.; Duffy, K. P.; Choi, B. B.; Morrison, C. R.; Jansen, R. H.; Provenza, A. J.


    Excessive vibration of turbomachinery blades causes high cycle fatigue (HCF) problems requiring damping treatments to mitigate vibration levels. Based on the technical challenges and requirements learned from previous turbomachinery blade research, a feasibility study of resonant damping control using shunted piezoelectric patches with passive and active control techniques has been conducted on cantilever beam specimens. Test results for the passive damping circuit show that the optimum resistive shunt circuit reduces the third bending resonant vibration by almost 50%, and the optimum inductive circuit reduces the vibration by 90%. In a separate test, active control reduced vibration by approximately 98%.

  20. The effect of white matter hyperintensities on verbal memory: Mediation by temporal lobe atrophy. (United States)

    Swardfager, Walter; Cogo-Moreira, Hugo; Masellis, Mario; Ramirez, Joel; Herrmann, Nathan; Edwards, Jodi D; Saleem, Mahwesh; Chan, Parco; Yu, Di; Nestor, Sean M; Scott, Christopher J M; Holmes, Melissa F; Sahlas, Demetrios J; Kiss, Alexander; Oh, Paul I; Strother, Stephen C; Gao, Fuqiang; Stefanovic, Bojana; Keith, Julia; Symons, Sean; Swartz, Richard H; Lanctôt, Krista L; Stuss, Donald T; Black, Sandra E


    To determine the relationship between white matter hyperintensities (WMH) presumed to indicate disease of the cerebral small vessels, temporal lobe atrophy, and verbal memory deficits in Alzheimer disease (AD) and other dementias. We recruited groups of participants with and without AD, including strata with extensive WMH and minimal WMH, into a cross-sectional proof-of-principle study (n = 118). A consecutive case series from a memory clinic was used as an independent validation sample (n = 702; Sunnybrook Dementia Study; NCT01800214). We assessed WMH volume and left temporal lobe atrophy (measured as the brain parenchymal fraction) using structural MRI and verbal memory using the California Verbal Learning Test. Using path modeling with an inferential bootstrapping procedure, we tested an indirect effect of WMH on verbal recall that depends sequentially on temporal lobe atrophy and verbal learning. In both samples, WMH predicted poorer verbal recall, specifically due to temporal lobe atrophy and poorer verbal learning (proof-of-principle -1.53, 95% bootstrap confidence interval [CI] -2.45 to -0.88; and confirmation -0.66, 95% CI [-0.95 to -0.41] words). This pathway was significant in subgroups with (-0.20, 95% CI [-0.38 to -0.07] words, n = 363) and without (-0.71, 95% CI [-1.12 to -0.37] words, n = 339) AD. Via the identical pathway, WMH contributed to deficits in recognition memory (-1.82%, 95% CI [-2.64% to -1.11%]), a sensitive and specific sign of AD. Across dementia syndromes, WMH contribute indirectly to verbal memory deficits considered pathognomonic of Alzheimer disease, specifically by contributing to temporal lobe atrophy. © 2018 American Academy of Neurology.

  1. A Monte Carlo Simulation approach for the modeling of free-molecule squeeze-film damping of flexible microresonators

    KAUST Repository

    Leung, Roger


    Squeeze-film damping on microresonators is a significant damping source even when the surrounding gas is highly rarefied. This article presents a general modeling approach based on Monte Carlo (MC) simulations for the prediction of squeeze-film damping on resonators in the freemolecule regime. The generality of the approach is demonstrated in its capability of simulating resonators of any shape and with any accommodation coefficient. The approach is validated using both the analytical results of the free-space damping and the experimental data of the squeeze-film damping on a clamped-clamped plate resonator oscillating at its first flexure mode. The effect of oscillation modes on the quality factor of the resonator has also been studied and semi-analytical approximate models for the squeeze-film damping with diffuse collisions have been developed.

  2. Photosensitized electron transfer within a self-assembled norharmane-2'-deoxyadenosine 5'-monophosphate (dAMP) complex. (United States)

    Gonzalez, M Micaela; Rasse-Suriani, Federico A O; Franca, Carlos A; Diez, Reinaldo Pis; Gholipour, Yousef; Nonami, Hiroshi; Erra-Balsells, Rosa; Cabrerizo, Franco M


    Norharmane is a compound that belongs to a family of alkaloids called β-carbolines (βCs). These alkaloids are present in a wide range of biological systems, playing a variety of significant photo-dependent roles. Upon UV-A irradiation, βCs are able to act as efficient photosensitizers. In this work, we have investigated the photosensitized oxidation of 2'-deoxyadenosine 5'-monophosphate (dAMP) by norharmane in an aqueous phase, upon UV-A (350 nm) irradiation. The effect of the pH was evaluated on both the interactions between norharmane and dAMP in the ground and electronic excited states, and on the dAMP photosensitized oxidation. A quite strong static interaction between norharmane and dAMP was observed, especially under those pH conditions where the protonated form of the alkaloid is present (pH dAMP complex is the operative mechanism in the dAMP photosensitization.

  3. Effects of prior exposure on music liking and recognition in patients with temporal lobe lesions. (United States)

    Samson, Séverine; Peretz, Isabelle


    Prior exposure to music typically increases liking. This manifestation of implicit memory can be dissociated from explicit memory recognition. To examine the contribution of the medial temporal lobe to musical preference and recognition, we tested patients with either left (LTL) or right (RTL) temporal lobe lesions as well as normal control (NC) participants using the procedure of Peretz et al. The results in the affect task showed that NC and LTL participants preferred the studied over nonstudied melodies, thereby demonstrating an implicit exposure effect on liking judgments, whereas RTL patients failed to exhibit this effect. Explicit recognition was impaired in both LTL and RTL patients as compared to NC participants. On the basis of these findings, we suggest that RTL structures play a critical role in the formation of melody representations that support both priming and memory recognition, whereas LTL structures are more involved in the explicit retrieval of melodies. Furthermore, we were able to test an amnesic patient (PC) with bilateral lesions of the temporal lobe. In this case, the exposure effect on liking was also absent. However, repeated exposure to melodies was found to enhance both liking and recognition judgments. This remarkable sparing of memory observed through melody repetition suggests that extensive exposure may assist both implicit and explicit memory in the presence of global amnesia.

  4. Treatment of temporal aliasing effects in the context of next generation satellite gravimetry missions (United States)

    Daras, Ilias; Pail, Roland


    Temporal aliasing effects have a large impact on the gravity field accuracy of current gravimetry missions and are also expected to dominate the error budget of Next Generation Gravimetry Missions (NGGMs). This paper focuses on aspects concerning their treatment in the context of Low-Low Satellite-to-Satellite Tracking NGGMs. Closed-loop full-scale simulations are performed for a two-pair Bender-type Satellite Formation Flight (SFF), by taking into account error models of new generation instrument technology. The enhanced spatial sampling and error isotropy enable a further reduction of temporal aliasing errors from the processing perspective. A parameterization technique is adopted where the functional model is augmented by low-resolution gravity field solutions coestimated at short time intervals, while the remaining higher-resolution gravity field solution is estimated at a longer time interval. Fine-tuning the parameterization choices leads to significant reduction of the temporal aliasing effects. The investigations reveal that the parameterization technique in case of a Bender-type SFF can successfully mitigate aliasing effects caused by undersampling of high-frequency atmospheric and oceanic signals, since their most significant variations can be captured by daily coestimated solutions. This amounts to a "self-dealiasing" method that differs significantly from the classical dealiasing approach used nowadays for Gravity Recovery and Climate Experiment processing, enabling NGGMs to retrieve the complete spectrum of Earth's nontidal geophysical processes, including, for the first time, high-frequency atmospheric and oceanic variations.

  5. Short and Sweet: The Persuasive Effects of Message Framing and Temporal Context in Antismoking Warning Labels. (United States)

    Mollen, Saar; Engelen, Susanne; Kessels, Loes T E; van den Putte, Bas


    Current warning labels on cigarette packages are generally focused on long-term losses that can be incurred if one continues smoking. This study compares the effects of these labels against warning labels that stress short-term losses of smoking as well as labels that stress short- and long-term benefits that can be obtained when one quits smoking. A 2 (message frame: gain vs. loss) × 2 (temporal context: short vs. long term) between-subjects experiment was conducted among 132 smokers, with attitude toward quitting smoking and intention to quit smoking, as well as information-seeking behavior and message recall, as the dependent variables. Findings were in line with theory regarding message framing and temporal discounting, showing enhanced effects of gain over loss frames and short-term over long-term consequences on warning labels for attitudes and intentions. In addition, an interaction between message frame and temporal context was found. Especially, gain-framed messages showed stronger effects on intentions to quit smoking than loss-framed messages when warning labels concerned short-term outcomes. Findings suggest that current warning labels, with an emphasis on long-term negative health outcomes, should be reconsidered.

  6. Exploring the temporal effects of seasonal water availability on the snail kite of Florida: Part III (United States)

    Mooij, Wolf M.; Martin, Julien; Kitchens, Wiley M.; DeAngelis, Donald L.; Bissonette, John A.; Storch, Ilse


    The Florida snail kite (Rostrhamus sociabilis) is an endangered raptor that occurs as an isolated population, currently of about 2,000 birds, in the wetlands of southern and central Florida, USA. Its exclusive prey species, the apple snail (Pomacea paludosa) is strongly influenced by seasonal changes in water abundance. Droughts during the snail kite breeding season have a direct negative effect on snail kite survival and reproduction, but droughts are also needed to maintain aquatic vegetation types favorable to snail kite foraging for snails. We used a spatially explicit matrix model to explore the effects of temporal variation in water levels on the viability of the snail kite population under different temporal drought regimes in its wetland breeding habitat. We focused on three aspects of variations in water levels that were likely to affect kites: (1) drought frequency; (2) drought duration; and (3) drought timing within the year. We modeled a 31-year historical scenario using four different scenarios in which the average water level was maintained constant, but the amplitude of water level fluctuations was modified. Our results reveal the complexity of the effects of temporal variation in water levels on snail kite population dynamics. Management implications of these results are discussed. In particular, management decisions should not be based on annual mean water levels alone, but must consider the intra-annual variability.

  7. Aspects of Coulomb damping in rotors supported on hydrodynamic bearings (United States)

    Morton, P. G.


    The paper is concerned with the effect of friction in drive couplings on the non-sychronous whirling of a shaft. A simplified model is used to demonstrate the effect of large coupling misalignments on the stability of the system. It is concluded that provided these misalignments are large enough, the system becomes totally stable provided the shaft is supported on bearings exhibiting a viscous damping capacity.

  8. Effects of damping-off caused by Rhizoctonia solani anastomosis group 2-1 on roots of wheat and oil seed rape quantified using X-ray Computed Tomography and real-time PCR

    Directory of Open Access Journals (Sweden)

    Craig J. Sturrock


    Full Text Available Rhizoctonia solani is a plant pathogenic fungus that causes significant establishment and yield losses to several important food crops globally. This is the first application of high resolution X-ray micro Computed Tomography (X-ray µCT and real-time PCR to study host-pathogen interactions in situ and elucidate the mechanism of Rhizoctonia damping-off disease over a 6-day period caused by R. solani, anastomosis group (AG 2-1 in wheat (Triticum aestivum cv. Gallant and oil seed rape (OSR, Brassica napus cv. Marinka. Temporal, non-destructive analysis of root system architectures was performed using RooTrak and validated by the destructive method of root washing. Disease was assessed visually and related to pathogen DNA quantification in soil using real-time PCR. R. solani AG2-1 at similar initial DNA concentrations in soil was capable of causing significant damage to the developing root systems of both wheat and OSR. Disease caused reductions in primary root number, root volume, root surface area and convex hull which were affected less in the monocotyledonous host. Wheat was more tolerant to the pathogen, exhibited fewer symptoms and developed more complex root system. In contrast, R. solani caused earlier damage and maceration of the taproot of the dicot, OSR. Disease severity was related to pathogen DNA accumulation in soil only for OSR, however reductions in root traits were significantly associated with both disease and pathogen DNA. The method offers the first steps in advancing current understanding of soil-borne pathogen behaviour in situ at the pore scale, which may lead to the development of mitigation measures to combat disease influence in the field.

  9. Air Damping in a Fan-Shaped Rotational Resonator with Comb Electrodes (United States)

    Uchida, Yuki; Sugano, Koji; Tsuchiya, Toshiyuki; Tabata, Osamu; Ikehara, Tsuyoshi

    We theoretically and experimentally evaluated the damping effect in a rotational resonator with a comb-drive actuator and sensor. The resonator was fabricated from an SOI wafer and has a fan-shaped mass. The underlying substrate was removed using back side deep reactive ion etching. One set of comb electrodes was attached to each side of the mass: one for electrostatic driving and the other for capacitive detection. In our theoretical analysis, the dynamics of the resonator were simplified so that they could be represented by a lumped system. In this lumped system, the damping coefficient was estimated by assuming the damping to be slide film damping and the air flow to be a Stokes flow. The phase shift due to the slide film damping of thick air layers was included in the lumped system. In the experimental evaluation, one side of the rotational combs was removed step-by-step and a half of the mass using a laser trimming tool so that the individual damping effects caused by the comb electrodes and mass could be determined quantitatively. We compared the experimental results with the results of the theoretical analysis and found that the difference in the damping coefficients between the experimental results and results of the theoretical analysis was less than 40%.

  10. Comparative Study of Popular Objective Functions for Damping Power System Oscillations in Multimachine System (United States)

    Niamul Islam, Naz; Hannan, M. A.; Shareef, Hussain; Mohamed, Azah; Salam, M. A.


    Power oscillation damping controller is designed in linearized model with heuristic optimization techniques. Selection of the objective function is very crucial for damping controller design by optimization algorithms. In this research, comparative analysis has been carried out to evaluate the effectiveness of popular objective functions used in power system oscillation damping. Two-stage lead-lag damping controller by means of power system stabilizers is optimized using differential search algorithm for different objective functions. Linearized model simulations are performed to compare the dominant mode's performance and then the nonlinear model is continued to evaluate the damping performance over power system oscillations. All the simulations are conducted in two-area four-machine power system to bring a detailed analysis. Investigated results proved that multiobjective D-shaped function is an effective objective function in terms of moving unstable and lightly damped electromechanical modes into stable region. Thus, D-shape function ultimately improves overall system damping and concurrently enhances power system reliability. PMID:24977210

  11. Temporal Ordering Effects of Adolescent Depression, Relational Aggression, and Victimization over Six Waves: Fully Latent Reciprocal Effects Models (United States)

    Marsh, Herbert W.; Craven, Rhonda G.; Parker, Philip D.; Parada, Roberto H.; Guo, Jiesi; Dicke, Theresa; Abduljabbar, Adel Salah


    The temporal ordering of depression, aggression, and victimization has important implications for theory, policy, and practice. For a representative sample of high school students (Grades 7-10; N = 3,793) who completed the same psychometrically strong, multiitem scales 6 times over a 2-year period, there were reciprocal effects between…

  12. Eigensolutions of non-proportionally damped systems based on continuous damping sensitivity (United States)

    Lázaro, Mario


    The viscous damping model has been widely used to represent dissipative forces in structures under mechanical vibrations. In multiple degree of freedom systems, such behavior is mathematically modeled by a damping matrix, which in general presents non-proportionality, that is, it does not become diagonal in the modal space of the undamped problem. Eigensolutions of non-proportional systems are usually estimated assuming that the modal damping matrix is diagonally dominant (neglecting the off-diagonal terms) or, in the general case, using the state-space approach. In this paper, a new closed-form expression for the complex eigenvalues of non-proportionally damped system is proposed. The approach is derived assuming small damping and involves not only the diagonal terms of the modal damping matrix, but also the off-diagonal terms, which appear under higher order. The validity of the proposed approach is illustrated through a numerical example.

  13. Multiple nucleon transfer in damped nuclear collisions

    International Nuclear Information System (INIS)

    Randrup, J.


    This lecture discusses a theory for the transport of mass, charge, linear, and angular momentum and energy in damped nuclear collisions, as induced by multiple transfer of individual nucleons. 11 references

  14. Offline software for the DAMPE experiment (United States)

    Wang, Chi; Liu, Dong; Wei, Yifeng; Zhang, Zhiyong; Zhang, Yunlong; Wang, Xiaolian; Xu, Zizong; Huang, Guangshun; Tykhonov, Andrii; Wu, Xin; Zang, Jingjing; Liu, Yang; Jiang, Wei; Wen, Sicheng; Wu, Jian; Chang, Jin


    A software system has been developed for the DArk Matter Particle Explorer (DAMPE) mission, a satellite-based experiment. The DAMPE software is mainly written in C++ and steered using a Python script. This article presents an overview of the DAMPE offline software, including the major architecture design and specific implementation for simulation, calibration and reconstruction. The whole system has been successfully applied to DAMPE data analysis. Some results obtained using the system, from simulation and beam test experiments, are presented. Supported by Chinese 973 Program (2010CB833002), the Strategic Priority Research Program on Space Science of the Chinese Academy of Science (CAS) (XDA04040202-4), the Joint Research Fund in Astronomy under cooperative agreement between the National Natural Science Foundation of China (NSFC) and CAS (U1531126) and 100 Talents Program of the Chinese Academy of Science

  15. Damping of wind turbine tower vibrations

    DEFF Research Database (Denmark)

    Brodersen, Mark Laier; Pedersen, Mikkel Melters

    Damping of wind turbine vibrations by supplemental dampers is a key ingredient for the continuous use of monopiles as support for offshore wind turbines. The present thesis consists of an extended summary with four parts and appended papers [P1-P4] concerning novel strategies for damping of tower...... in a stroke amplifying brace, which amplifies the displacement across the damper and thus reduces the desired level of damper force. For optimal damping of the two lowest tower modes, a novel toggle-brace concept for amplifying the bending deformation of the tower is presented. Numerical examples illustrate...... damper with IFFis validated by a series of real time hybrid simulations (RTHS). The experimental results illustrate the ability of the hybrid damper concept to increase damper stroke or attainable damping. The results also show that the actuator signal is quitesensitive to drift due an offset...

  16. Effects of Temporal Framing on Response to Antismoking Messages: The Mediating Role of Perceived Relevance. (United States)

    Zhao, Xiaoquan; Peterson, Emily


    This study tested the effect of temporal framing on young adult smokers' response to antismoking communication messages. In two studies using largely identical designs, young adult smokers recruited from a large university (n = 52) and Amazon Mechanical Turk (n = 210) were exposed to either no messages or messages featuring different temporal frames. Analysis of the combined data (N = 262) showed that framing the health consequences of smoking in a proximal (vs. distal) time frame led to greater perceived message relevance, less use of heuristic processing, greater use of systematic processing, greater positive affect, and more intense fear. Mediation analysis showed that perceived relevance was a significant mediator of the effect of temporal framing on message processing and emotional responses. In separate analysis of the Amazon Mechanical Turk data, the proximal frame also showed a consistent pattern of stronger impact on behavioral intentions compared to the distal frame, but the difference was only significant on the measure of intending to try to quit. Overall, findings of this study suggest that using proximal (vs. distal) frames may enhance receptivity to antismoking messages among young adult smokers, although the behavioral impact of this framing strategy still awaits further research.

  17. Time for Awareness: The Influence of Temporal Properties of the Mask on Continuous Flash Suppression Effectiveness.

    Directory of Open Access Journals (Sweden)

    Weina Zhu

    Full Text Available Visual processing is not instantaneous, but instead our conscious perception depends on the integration of sensory input over time. In the case of Continuous Flash Suppression (CFS, masks are flashed to one eye, suppressing awareness of stimuli presented to the other eye. One potential explanation of CFS is that it depends, at least in part, on the flashing mask continually interrupting visual processing before the stimulus reaches awareness. We investigated the temporal features of masks in two ways. First, we measured the suppression effectiveness of a wide range of masking frequencies (0-32Hz, using both complex (faces/houses and simple (closed/open geometric shapes stimuli. Second, we varied whether the different frequencies were interleaved within blocks or separated in homogenous blocks, in order to see if suppression was stronger or weaker when the frequency remained constant across trials. We found that break-through contrast differed dramatically between masking frequencies, with mask effectiveness following a skewed-normal curve peaking around 6Hz and little or no masking for low and high temporal frequencies. Peak frequency was similar for trial-randomized and block randomized conditions. In terms of type of stimulus, we found no significant difference in peak frequency between the stimulus groups (complex/simple, face/house, closed/open. These findings suggest that temporal factors play a critical role in perceptual awareness, perhaps due to interactions between mask frequency and the time frame of visual processing.

  18. Spatio-temporal effects of low severity grassland fire on soil colour (United States)

    Pereira, Paulo; Cerdà, Artemi; Bolutiene, Violeta; Pranskevicius, Mantas; Úbeda, Xavier; Jordán, Antonio; Zavala, Lorena; Mataix-Solera, Jorge


    Fire changes soil properties directly, through temperature, or indirectly with ash deposition and the temporal elimination of vegetal cover. Both influences change soil colour and soil properties. The degree of changes depends on fire severity that has important implications on soil organic matter, texture, mineralogy and hydrological properties and type of ash produced. The ash colour is different according to the temperature of combustion and burned specie and this property will have implications on soil colour. In addition, ash properties have a strong spatial variability. The aim of this work is to study the spatio-temporal effects of a low severity grassland fire on soil colour occurred in Lithuania, near Vilnius city (54° 42' N, 25° 08' E, 158 m.a.s.l.). After the fire it was designed a plot of 20x20m in a burned and unburned flat area. Soil colour was analysed immediately after the fire, and 2, 5, 7 and 9 months after the fire. In each sampling 25 soil samples were collected, carried out to the laboratory, dried at room temperature (20-24° C) and sieved with the Solid Earth Discussions, 4 (1), 1545-1584. doi:10.5194/sed-4-1-2012 Pereira, P., Pranskevicius, M., Cepanko, V., Vaitkute, D., Pundyte, N., Ubeda, X., Mataix-Soler, J., Cerda, A., Martin, D.A. (2013c) Short time vegetation recovers after a spring grassland fire in Lithuania. Temporal and slope position effect, Flamma, 4(1), 13-17.

  19. Experimental evaluation of a self-powered smart damping system in reducing vibrations of a full-scale stay cable

    International Nuclear Information System (INIS)

    Kim, In-Ho; Jung, Hyung-Jo; Koo, Jeong-Hoi


    This paper investigates the effectiveness of a self-powered smart damping system consisting of a magnetorheological (MR) damper and an electromagnetic induction (EMI) device in reducing cable vibrations. The proposed smart damping system incorporates an EMI device, which is capable of converting vibration energy into useful electrical energy. Thus, the incorporated EMI device can be used as an alternative power source for the MR damper, making it a self-powering system. The primary goal of this experimental study is to evaluate the performance of the proposed smart damping system using a full-scale, 44.7 m long, high-tension cable. To this end, an EMI part and an MR damper were designed and manufactured. Using a cable test setup in a laboratory setting, a series of tests were performed to evaluate the effectiveness of the self-powered smart damping system in reducing free vibration responses of the cable. The performances of the proposed smart damping system are compared with those of an equivalent passive system. Moreover, the damping characteristics of the smart damping system and the passive system are compared. The experimental results show that the self-powered smart damping system outperforms the passive control cases in reducing the vibrations of the cable. The results also show that the EMI can operate the smart damping system as a sole power source, demonstrating the feasibility of the self-powering capability of the system

  20. Nonlinear damping of drift waves by strong flow curvature

    International Nuclear Information System (INIS)

    Sidikman, K.L.; Carreras, B.A.; Garcia, L.; Diamond, P.H.


    A single-equation model has been used to study the effect of a fixed poloidal flow (V 0 ) on turbulent drift waves. The electron dynamics come from a laminar kinetic equation in the dissipative trapped-electron regime. In the past, the authors have assumed that the mode frequency is close to the drift-wave frequency. Trapped-electron density fluctuations are then related to potential fluctuations by an open-quotes iδclose quotes term. Flow shear (V 0 ') and curvature (V 0 double-prime) both have a stabilizing effect on linear modes for this open-quotes iδclose quotes model. However, in the nonlinear regime, single-helicity effects inhibit the flow damping. Neither V 0 ' nor V 0 double-prime produces a nonlinear damping effect. The above assumption on the frequency can be relaxed by including the electron time-response in the linear part of the evolution. In this time-dependent model, instability drive due to trapped electrons is reduced when mode frequency is greater than drift-wave frequency. Since V 0 double-prime produces such a frequency shift, its linear effect is enhanced. There is also nonlinear damping, since single-helicity effects do not eliminate the shift. Renormalized theory for this model predicts nonlinear stability for sufficiently large curvature. Single-helicity calculations have already shown nonlinear damping, and this strong V 0 double-prime regime is being explored. In the theory, the Gaussian shape of the nonlinear diffusivity is expanded to obtain a quadratic potential. The implications of this assumption will be tested by solving the full renormalized equation using a shooting method

  1. Damping elastic oscillations of digging mechanism (United States)

    Kuznetsov, N. K.; Makhno, D. E.; Iov, I. A.


    The article studies methods for reducing dynamic loading and elastic oscillations of excavator buckets using dampers. The authors suggest a structural scheme for damping bucket oscillations using a damping device installed in a running gear of the traction cable. The results of numerical efficiency simulation are presented. The article shows that the system helps to reduce intensity of elastic oscillations and a transition period in acceleration and deceleration modes.

  2. CLIC Waveguide Damped Accelerating Structure Studies

    CERN Document Server

    Dehler, M; Wuensch, Walter


    Studies of waveguide damped 30 GHz accelerating structures for multibunching in CLIC are described. Frequency discriminated damping using waveguides with a lowest cutoff frequency above the fundamental but below the higher order modes was considered. The wakefield behavior was investigated using time domain MAFIA computations over up to 20 cells and for frequencies up to 150 GHz. A configuration consisting of four T-cross-sectioned waveguides per cell reduces the transverse wake below 1% at typical CLIC bunch spacings.

  3. Vibration and Instability of Rotating Composite Thin-Walled Shafts with Internal Damping

    Directory of Open Access Journals (Sweden)

    Ren Yongsheng


    Full Text Available The dynamical analysis of a rotating thin-walled composite shaft with internal damping is carried out analytically. The equations of motion are derived using the thin-walled composite beam theory and the principle of virtual work. The internal damping of shafts is introduced by adopting the multiscale damping analysis method. Galerkin’s method is used to discretize and solve the governing equations. Numerical study shows the effect of design parameters on the natural frequencies, critical rotating speeds, and instability thresholds of shafts.

  4. SOGI-based capacitor voltage feedback active damping in LCL-filtered grid converters

    DEFF Research Database (Denmark)

    Xin, Zhen; Wang, Xiongfei; Loh, Poh Chiang


    The capacitor voltage feedback active damping control is an attractive way to suppress LCL-filter resonance especially for the systems where the capacitor voltage is used for grid synchronization, since no extra sensors are added. The derivative is the core of the capacitor voltage feedback active...... damping control. However, in digital systems, the discrete implementation of the derivative suffers from noise amplification and accuracy issues. To overcome these drawbacks, this paper proposes a new derivative method based on Second-Order Generalized Integrator. Theoretical study shows that the proposed...... derivative is more suited for capacitor voltage feedback active damping control. Experimental results validate the effectiveness of the proposed method....

  5. PGE2 induced in and released by dying cells functions as an inhibitory DAMP. (United States)

    Hangai, Sho; Ao, Tomoka; Kimura, Yoshitaka; Matsuki, Kosuke; Kawamura, Takeshi; Negishi, Hideo; Nishio, Junko; Kodama, Tatsuhiko; Taniguchi, Tadatsugu; Yanai, Hideyuki


    Cellular components released into the external milieu as a result of cell death and sensed by the body are generally termed damage-associated molecular patterns (DAMPs). Although DAMPs are conventionally thought to be protective to the host by evoking inflammatory responses important for immunity and wound repair, there is the prevailing notion that dysregulated release of DAMPs can also underlie or exacerbate disease development. However, the critical issue for how resultant DAMP-mediated responses are regulated has heretofore not been fully addressed. In the present study, we identify prostaglandin E2 (PGE2) as a DAMP that negatively regulates immune responses. We show that the production of PGE2 is augmented under cell death-inducing conditions via the transcriptional induction of the cyclooxygenase 2 (COX2) gene and that cell-released PGE2 suppresses the expression of genes associated with inflammation, thereby limiting the cell's immunostimulatory activities. Consistent with this, inhibition of the PGE2 synthesis pathway potentiates the inflammation induced by dying cells. We also provide in vivo evidence for a protective role of PGE2 released upon acetaminophen-induced liver injury as well as a pathogenic role for PGE2 during tumor cell growth. Our study places this classically known lipid mediator in an unprecedented context-that is, an inhibitory DAMP vis-à-vis activating DAMPs, which may have translational implications for designing more effective therapeutic regimens for inflammation-associated diseases.

  6. Structural damping values as a function of dynamic response stress and deformation levels

    International Nuclear Information System (INIS)

    Stevenson, J.D.


    Damping as it is normally defined is the means by which the response motion of a structural system is reduced as the result of energy losses. However, as used in the context of nuclear plant design, the effects of changes in structural stiffness, geometry, support configuration, and modulus of elasticity are also usually lumped under the general heading of damping in current design methods. For convenience in structural design, damping in usually assumed as viscous in nature and in recognition of its use in modal response spectrum dynamic analysis is normally expressed as a percent of critical. In general, it should be understood that damping as used in design or analysis of nuclear plants is an experimentally determined factor which is used to make the results of linear elasticity analysis of dynamic systems agree reasonably well with observed experimental results. In this paper, damping data existing in the open literature applicable to nuclear power plant structures and equipment is summarized and statistically analyzed. Results of this analysis are used to develop damping trend curves which predict applicable damping values to be used in design at various levels of stress or deformation. (orig.)

  7. Assessing species and stage specific effects of preservation on fish oocytes over different temporal scales

    Directory of Open Access Journals (Sweden)

    M. RAKKA


    Full Text Available This study assessed the effect of 10% neutral buffered formalin and of three ethanol solutions of different concentration on Mediterranean sardine and European anchovy oocytes over several temporal scales (days, weeks, months. The two species exhibit differences both in the elemental composition and the shape of their oocytes which further allowed an appraisal of oocyte shrinkage dynamics in relation to oocyte shape, developmental stage and composition. We showed that the effect of the preservative on oocyte size is stage specific while different preservation periods of ovarian material might lead to discrepancies among studies.

  8. Effects of climate change adaptation scenarios on perceived spatio-temporal characteristics of drought events (United States)

    Vidal, J.-P.; Martin, E.; Kitova, N.; Najac, J.; Soubeyroux, J.-M.


    " adaptation) or over a 30-year period centred around the date considered ("prospective" adaptation). These adaptation scenarios are translated into local-scale transient drought thresholds, as opposed to a non-adaptation scenario where the drought threshold remains constant. The perceived spatio-temporal characteristics derived from the theoretical adaptation scenarios show much reduced changes, but they call for more realistic scenarios at both the catchment and national scale in order to accurately assess the combined effect of local-scale adaptation and global-scale mitigation. This study thus proposes a proof of concept for using standardized drought indices for (1) assessing projections of spatio-temporal drought characteristics and (2) building theoretical adaptation scenarios and associated perceived changes in hydrological impact studies (Vidal et al., submitted). Vidal J.-P., Martin E., Franchistéguy L., Habets F., Soubeyroux J.-M., Blanchard M. & Baillon M. (2010) Multilevel and multiscale drought reanalysis over France with the Safran-Isba-Modcou hydrometeorological suite. Hydrology and Earth System Sciences, 14, 459-478.doi: 10.5194/hess-14-459-2010 Vidal J.-P., Martin E., Kitova N., Najac J. & Soubeyroux, J. M. (submitted) Evolution of spatio-temporal drought characteristics: validation, projections and effect of adaptation scenarios. Submitted to Hydrology and earth System Sciences

  9. Effects of transient auditory deprivation during critical periods on the development of auditory temporal processing. (United States)

    Kim, Bong Jik; Kim, Jungyoon; Park, Il-Yong; Jung, Jae Yun; Suh, Myung-Whan; Oh, Seung-Ha


    The central auditory pathway matures through sensory experiences and it is known that sensory experiences during periods called critical periods exert an important influence on brain development. The present study aimed to investigate whether temporary auditory deprivation during critical periods (CPs) could have a detrimental effect on the development of auditory temporal processing. Twelve neonatal rats were randomly assigned to control and study groups; Study group experienced temporary (18-20 days) auditory deprivation during CPs (Early deprivation study group). Outcome measures included changes in auditory brainstem response (ABR), gap prepulse inhibition of the acoustic startle reflex (GPIAS), and gap detection threshold (GDT). To further delineate the specific role of CPs in the outcome measures above, the same paradigm was applied in adult rats (Late deprivation group) and the findings were compared with those of the neonatal rats. Soon after the restoration of hearing, early deprivation study animals showed a significantly lower GPIAS at intermediate gap durations and a larger GDT than early deprivation controls, but these differences became insignificant after subsequent auditory inputs. Additionally, the ABR results showed significantly delayed latencies of waves IV, V, and interpeak latencies of wave I-III and wave I-V in study group. Late deprivation group didn't exhibit any deterioration in temporal processing following sensory deprivation. Taken together, the present results suggest that transient auditory deprivation during CPs might cause reversible disruptions in the development of temporal processing. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Dialect effects in vowel perception: the role of temporal information in French. (United States)

    Miller, J L; Grosjean, F


    The importance of vowel duration for specifying vowel contrasts differs across languages. In English, for example, a number of vowel pairs are acoustically differentiated by both temporal and spectral information, whereas in standard French temporal information plays a much more minor role. Gottfried and Beddor (1988) reported that the effectiveness of vowel duration in perception varies accordingly: For native speakers of English, but not native speakers of standard French, a change in vowel duration affected the perceptual identity of a vowel contrast. We tested the hypothesis that the relative prominence of vowel duration within different dialects of a given language also has perceptual consequences. Vowel duration plays a much more important role in the phonological system of Swiss French than standard French. Given this, we predicted that native speakers of Swiss French, unlike native speakers of standard French, would use temporal information when identifying vowels. Our prediction was confirmed. These findings indicate that just as there are cross-language differences in fundamental aspects of speech perception, so too are there cross-dialect differences, and they support the view that the perceptual mapping between acoustic signal and vowel category is sensitive to global aspects of the listener's phonological system.

  11. Method of Obtaining High Resolution Intrinsic Wire Boom Damping Parameters for Multi-Body Dynamics Simulations (United States)

    Yew, Alvin G.; Chai, Dean J.; Olney, David J.


    The goal of NASA's Magnetospheric MultiScale (MMS) mission is to understand magnetic reconnection with sensor measurements from four spinning satellites flown in a tight tetrahedron formation. Four of the six electric field sensors on each satellite are located at the end of 60- meter wire booms to increase measurement sensitivity in the spin plane and to minimize motion coupling from perturbations on the main body. A propulsion burn however, might induce boom oscillations that could impact science measurements if oscillations do not damp to values on the order of 0.1 degree in a timely fashion. Large damping time constants could also adversely affect flight dynamics and attitude control performance. In this paper, we will discuss the implementation of a high resolution method for calculating the boom's intrinsic damping, which was used in multi-body dynamics simulations. In summary, experimental data was obtained with a scaled-down boom, which was suspended as a pendulum in vacuum. Optical techniques were designed to accurately measure the natural decay of angular position and subsequently, data processing algorithms resulted in excellent spatial and temporal resolutions. This method was repeated in a parametric study for various lengths, root tensions and vacuum levels. For all data sets, regression models for damping were applied, including: nonlinear viscous, frequency-independent hysteretic, coulomb and some combination of them. Our data analysis and dynamics models have shown that the intrinsic damping for the baseline boom is insufficient, thereby forcing project management to explore mitigation strategies.

  12. Vibration damping in bolted friction beam-columns


    Bournine, H.; Wagg, D.J.; Neild, S.A.


    In this paper we examine the use of dynamic friction within a bolted structure to improve damping properties of the structure. The structure considered for this paper consists of two steel beam-columns bolted together allowing dynamic friction to occur at the interface. This paper presents an analysis of the behaviour of the structure and the effect of friction on its dynamics. It also presents an analysis of the energy dissipation in the structure by means of friction and the optimization of...

  13. Bifurcation characteristics in parametric systems with combined damping

    Czech Academy of Sciences Publication Activity Database

    Hortel, Milan; Škuderová, Alena

    Vol.16, č. 3 (2009), s. 1-9 ISSN 1802-1484 R&D Projects: GA ČR(CZ) GA101/07/0884 Institutional research plan: CEZ:AV0Z20760514 Keywords : non-linear dynamics * parametric systems * impact effects * linear and non-linear damping Subject RIV: BI - Acoustics

  14. Stimulus repetition and the perception of time: the effects of prior exposure on temporal discrimination, judgment, and production.

    Directory of Open Access Journals (Sweden)

    William J Matthews

    Full Text Available It has been suggested that repeated stimuli have shorter subjective duration than novel items, perhaps because of a reduction in the neural response to repeated presentations of the same object. Five experiments investigated the effects of repetition on time perception and found further evidence that immediate repetition reduces apparent duration, consistent with the idea that subjective duration is partly based on neural coding efficiency. In addition, the experiments found (a no effect of repetition on the precision of temporal discrimination, (b that the effects of repetition disappeared when there was a modest lag between presentations, (c that, across participants, the size of the repetition effect correlated with temporal discrimination, and (d that the effects of repetition suggested by a temporal production task were the opposite of those suggested by temporal judgments. The theoretical and practical implications of these results are discussed.

  15. Dynamic Optimization of Constrained Layer Damping Structure for the Headstock of Machine Tools with Modal Strain Energy Method

    Directory of Open Access Journals (Sweden)

    Yakai Xu


    Full Text Available Dynamic stiffness and damping of the headstock, which is a critical component of precision horizontal machining center, are two main factors that influence machining accuracy and surface finish quality. Constrained Layer Damping (CLD structure is proved to be effective in raising damping capacity for the thin plate and shell structures. In this paper, one kind of high damping material is utilized on the headstock to improve damping capacity. The dynamic characteristic of the hybrid headstock is investigated analytically and experimentally. The results demonstrate that the resonant response amplitudes of the headstock with damping material can decrease significantly compared to original cast structure. To obtain the optimal configuration of damping material, a topology optimization method based on the Evolutionary Structural Optimization (ESO is implemented. Modal Strain Energy (MSE method is employed to analyze the damping and to derive the sensitivity of the modal loss factor. The optimization results indicate that the added weight of damping material decreases by 50%; meanwhile the first two orders of modal loss factor decrease by less than 23.5% compared to the original structure.

  16. Effect of temporal averaging of meteorological data on predictions of groundwater recharge

    Directory of Open Access Journals (Sweden)

    Batalha Marcia S.


    Full Text Available Accurate estimates of infiltration and groundwater recharge are critical for many hydrologic, agricultural and environmental applications. Anticipated climate change in many regions of the world, especially in tropical areas, is expected to increase the frequency of high-intensity, short-duration precipitation events, which in turn will affect the groundwater recharge rate. Estimates of recharge are often obtained using monthly or even annually averaged meteorological time series data. In this study we employed the HYDRUS-1D software package to assess the sensitivity of groundwater recharge calculations to using meteorological time series of different temporal resolutions (i.e., hourly, daily, weekly, monthly and yearly averaged precipitation and potential evaporation rates. Calculations were applied to three sites in Brazil having different climatological conditions: a tropical savanna (the Cerrado, a humid subtropical area (the temperate southern part of Brazil, and a very wet tropical area (Amazonia. To simplify our current analysis, we did not consider any land use effects by ignoring root water uptake. Temporal averaging of meteorological data was found to lead to significant bias in predictions of groundwater recharge, with much greater estimated recharge rates in case of very uneven temporal rainfall distributions during the year involving distinct wet and dry seasons. For example, at the Cerrado site, using daily averaged data produced recharge rates of up to 9 times greater than using yearly averaged data. In all cases, an increase in the time of averaging of meteorological data led to lower estimates of groundwater recharge, especially at sites having coarse-textured soils. Our results show that temporal averaging limits the ability of simulations to predict deep penetration of moisture in response to precipitation, so that water remains in the upper part of the vadose zone subject to upward flow and evaporation.

  17. Electrical anharmonicity and dampings contributions to Cl-H → stretching band in gaseous (CH3)2O…HCl complex: Quantum dynamic study and prediction of the temperature effects (United States)

    Rekik, Najeh; Alshammari, Majid F.


    In a previous work (Rekik et al., 2017), we demonstrated the ability of a simple anharmonic model of the dipole moment function of the X-H stretching band to explain a set of spectroscopic features of hydrogen bonding formation. Within the context of this model, we have shown that the origins of the broadening of the X - H → stretching band is attributed to large terms in the expansion of the autocorrelation functions due to the electrical anharmonicity. However, the question remained as to the ability of this model to treat the more complex situation in which we take into account the relaxation mechanisms that look at the effect of the surroundings and thereby gives rise to signatures of the medium to the X - H → stretching band lineshapes. Thus, in the present study, we investigated this situation by envisaging that the direct relaxation mechanism is due to the coupling between the fluctuating local electric field and the dipole moment of the complex as rationalized by Rosh and Ratner and the indirect damping resulting from the interaction of the X - H → stretch with its environment via the H-bond bridge mode. Theoretical experiments show that mixing of all these effects results in a speard and complicated structure. Using an ensemble of physically sound parameters as input into this approach, we have captured the main features in the experimental Cl - H → band in gaseous (CH3)2O…HCl complex and shown that the direct relaxation entrains a broadening of the spectra and is capable of qualitatively capturing the main features in the experimental spectra and quantitatively capturing the characteristic time scale of the vibrational dynamics of the Cl - H → stretching band. Furthermore, due to the decent agreement obtained between the theoretical and experimental line shapes at 226 K, the evolution of the IR spectra with the varaiation of temperature is proposed. The findings gained herein underscore the utility of combining simultaneously the effects of

  18. Modified multiple time scale method for solving strongly nonlinear damped forced vibration systems (United States)

    Razzak, M. A.; Alam, M. Z.; Sharif, M. N.


    In this paper, modified multiple time scale (MTS) method is employed to solve strongly nonlinear forced vibration systems. The first-order approximation is only considered in order to avoid complexicity. The formulations and the determination of the solution procedure are very easy and straightforward. The classical multiple time scale (MS) and multiple scales Lindstedt-Poincare method (MSLP) do not give desire result for the strongly damped forced vibration systems with strong damping effects. The main aim of this paper is to remove these limitations. Two examples are considered to illustrate the effectiveness and convenience of the present procedure. The approximate external frequencies and the corresponding approximate solutions are determined by the present method. The results give good coincidence with corresponding numerical solution (considered to be exact) and also provide better result than other existing results. For weak nonlinearities with weak damping effect, the absolute relative error measures (first-order approximate external frequency) in this paper is only 0.07% when amplitude A = 1.5 , while the relative error gives MSLP method is surprisingly 28.81%. Furthermore, for strong nonlinearities with strong damping effect, the absolute relative error found in this article is only 0.02%, whereas the relative error obtained by MSLP method is 24.18%. Therefore, the present method is not only valid for weakly nonlinear damped forced systems, but also gives better result for strongly nonlinear systems with both small and strong damping effect.

  19. WAMS Based Damping Control of Inter-area Oscillations Employing Energy Storage System

    Directory of Open Access Journals (Sweden)

    MA, J.


    Full Text Available This paper presents a systematic design procedure for a wide-area damping controller (WADC employing Energy Storage Systems (ESSs. The WADC is aimed at enhancing the damping of multiple inter-area modes in a large scale power system. Firstly, geometric measures of controllability and obsevability are used to select the control locations for ESSs and most effective stabilizing signals, respectively. Then, the WADC coordinates these signals to achieve multiple-input-multiple-output (MIMO controllers with the least Frobenius norm feedback gain matrix. The simulation results of frequency and time domains verify the effectiveness of the wide-area damping controller for various operating conditions. Furthermore, the robustness of the wide-area damping controller is also tested with respect to time delay and uncertainty of models.

  20. Susceptibility for cigarette smoke-induced DAMP release and DAMP-induced inflammation in COPD

    NARCIS (Netherlands)

    Pouwels, Simon D.; Hesse, Laura; Faiz, Alen; Lubbers, Jaap; Bodha, Priya K.; ten Hacken, Nick H. T.; van Oosterhout, Antoon J. M.; Nawijn, Martijn C.; Heijink, Irene H.


    Cigarette smoke (CS) exposure is a major risk factor for chronic obstructive pulmonary disease (COPD). We investigated whether CS-induced damage-associated molecular pattern (DAMP) release or DAMP-mediated inflammation contributes to susceptibility for COPD. Samples, including bronchial brushings,

  1. Damping of Inter-Area Low Frequency Oscillation Using an Adaptive Wide-Area Damping Controller

    DEFF Research Database (Denmark)

    Yao, Wei; Jiang, L.; Fang, Jiakun


    This paper presents an adaptive wide-area damping controller (WADC) based on generalized predictive control (GPC) and model identification for damping the inter-area low frequency oscillations in large-scale inter-connected power system. A recursive least-squares algorithm (RLSA) with a varying f...

  2. Higher order mode damping in Kaon factory RF cavities

    International Nuclear Information System (INIS)

    Enegren, T.; Poirier, R.; Griffin, J.; Walling, L.; Thiessen, H.A.; Smythe, W.R.


    Proposed designs for Kaon factory accelerators require that the rf cavities support beam currents on the order of several amperes. The beam current has Fourier components at all multiples of the rf frequency. Empty rf buckets produce additional components at all multiples of the revolution frequency. If a Fourier component of the beam coincides with the resonant frequency of a higher order mode of the cavity, which is inevitable if the cavity has a large frequency swing, significant excitation of this mode can occur. The induced voltage may then excite coupled bunch mode instabilities. Effective means are required to damp higher order modes without significantly affecting the fundamental mode. A mode damping scheme based on coupled transmission lines has been investigated and is report

  3. Modelling of damping forces occuring in simple MEMS systems

    Directory of Open Access Journals (Sweden)

    Kamil Urbanowicz


    Full Text Available A certain damping force occurs in the micro-mechanical systems referred as MEMS. At the design stage of such systems, these forces must be accurately estimated. As shown in this work, in all systems operating at low frequencies, most important force is the one associated with the flotation of air film from the volume between two parallel operating movable MEMS plates. This force can be accurately estimated by analytical methods known from the literature. The paper presents analytical solutions that are frequently used in practice for simple plates. Also some simple simulations, using all described analytical solutions compared with the results of specialized program called Comsol Multyphysics, are shown. Presented research demonstrate the effectiveness of numerical software.[b]Keywords[/b]: MEMS, damping forces, Reynolds equation, modelling, simulation

  4. Electron Cloud Build Up and Instability in the CLIC Damping Rings

    CERN Document Server

    Rumolo, G; Papaphilippou, Y


    Electron cloud can be formed in the CLIC positron damping ring and cause intolerable tune shift and beam instability. Build up simulations with the Faktor2 code, developed at CERN, have been done to predict the cloud formation in the arcs and wigglers of the damping rings. HEADTAIL simulations have been used to study the effect of this electron cloud on the beam and assess the thresholds above which the electron cloud instability would set in.

  5. Validity of building characteristics and dorm dampness obtained in a self-administrated questionnaire

    DEFF Research Database (Denmark)

    Sun, Y.X.; Sundell, Jan; Zhang, Y.F.


    status), while such problems observed by inspectors were not. The air relative humidity was slightly higher, during winter time, in rooms with condensation on windowpanes. The results indicate that questionnaire surveys give valid data regarding most technical characteristics. With regard to moisture...... characteristics, such as type of surface materials etc., but a poor to slight agreement (kappamoisture damages, such as mould or damp spots, and a mouldy smell, between occupants and inspectors. Dampness problems reported by occupants were associated with health effects (case...

  6. Extracellular ATP acts as a damage-associated molecular pattern (DAMP) signal in plants


    Tanaka, Kiwamu; Choi, Jeongmin; Cao, Yangrong; Stacey, Gary


    As sessile organisms, plants have evolved effective mechanisms to protect themselves from environmental stresses. Damaged (i.e., wounded) plants recognize a variety of endogenous molecules as danger signals, referred to as damage-associated molecular patterns (DAMPs). ATP is among the molecules that are released by cell damage, and recent evidence suggests that ATP can serve as a DAMP. Although little studied in plants, extracellular ATP is well known for its signaling role in animals, includ...

  7. Comparison of UPFC-Based Stabilizer and PSS Performances on Damping of Power System Oscillations


    M. R. Meshkatoddini; M. Majidi; M. Sadeghierad; H. Lesani


    This paper establishes the linearized Phillips-Heffron model of a power system equipped with UPFC and demonstrates the application of the model in analyzing the damping effect of the UPFC and designing UPFC based stabilizer to improve power system oscillation stability. A comprehensive approach to the design of UPFC based stabilizer (power flow control, DC-voltage regulator and damping controller) is presented. In this case, the multi-machine power system with UPFC is studied and an example o...

  8. Choke-Mode Damped Structure Design for the CLIC Main Linac

    CERN Document Server

    Zha, Hao; Tang, Chuanxiang; Huang, Wenhui; Shi, Jiaru; Grudiev, Alexej; Wuensch, Walter


    Choke-mode damped structures are being studied as an alternative design for the accelerating structures of main linacs of the compact linear collider (CLIC). Choke-mode structures have the potential for much lower pulsed temperature rise, and lower cost of manufacture and fabrication. A new kind of choke-mode structure was proposed and simulated by Gdfidl. This structures has comparable wakefield damping effect as the baseline design of CLIC main linacs.

  9. Coherent Instabilities of ILC Damping Ring

    Energy Technology Data Exchange (ETDEWEB)

    Heifets, S.; Stupakov, G.; Bane, K.; /SLAC


    The paper presents the first attempt to estimates the ILC damping ring impedance and compare thresholds of the classical instabilities for several designs initially proposed for the DR. The work was carried out in the spring of 2006. Since then the choice of the DR is narrowed. Nevertheless, the analysis described may be useful for the next iterations of the beam stability. Overall, the conventional instabilities will have little impact on the ring performance provided the careful design of the ring minimizes the impedance below acceptable level indicated above. The only exception is the transverse CB instability. The longitudinal CB is less demanding. However, even the transverse CB instability would have threshold current above nominal provided the aperture in the wigglers is increased from 8 mm to 16 mm. The microwave instability needs more studies. Nevertheless, we should remember that the ILC DR is different from existing high-current machines at least in two respects: absence of the beam-beam tune spread stabilizing beams in colliders, and unusual strict requirements for low emittance. That may cause new problems such as bunch emittance dilution due to high-frequency wakes (BPMs, grooves), etc. Even if such a possibility exists, it probably universal for all machines and ought be addressed in the design of vacuum components rather than have effect on the choice of the machine design.

  10. Seismic Analysis of a Viscoelastic Damping Isolator

    Directory of Open Access Journals (Sweden)

    Bo-Wun Huang


    Full Text Available Seismic prevention issues are discussed much more seriously around the world after Fukushima earthquake, Japan, April 2011, especially for those countries which are near the earthquake zone. Approximately 1.8×1012 kilograms of explosive energy will be released from a magnitude 9 earthquake. It destroys most of the unprotected infrastructure within several tens of miles in diameter from the epicenter. People can feel the earthquake even if living hundreds of miles away. This study is a seismic simulation analysis for an innovated and improved design of viscoelastic damping isolator, which can be more effectively applied to earthquake prevention and damage reduction of high-rise buildings, roads, bridges, power generation facilities, and so forth, from earthquake disaster. Solidworks graphic software is used to draw the 3D geometric model of the viscoelastic isolator. The dynamic behavior of the viscoelastic isolator through shock impact of specific earthquake loading, recorded by a seismometer, is obtained via ANSYS finite element package. The amplitude of the isolator is quickly reduced by the viscoelastic material in the device and is shown in a time response diagram. The result of this analysis can be a crucial reference when improving the design of a seismic isolator.

  11. Discontinuities in a damped quantum harmonic oscillator

    International Nuclear Information System (INIS)

    Giraldi, Filippo; Petruccione, Francesco


    The quantum model for a damped harmonic oscillator linearly coupled to a reservoir of continuous frequency modes has been exactly diagonalized either with or without the rotating wave approximation. The exact dynamics, formally described in terms of the coupling function, is analyzed for the Drude model. In this scenario, we focus on a class of couplings recovering the Drude form as a limiting case. The exact time evolution of the expectation values of the position, momentum and number operators are described through Fox H-functions, as well as the correlation function of the reservoir. In correspondence with the critical values of the frequency, discontinuities appear in the long time scale dynamics, arbitrarily slowing down the relaxations of the above observables. This effect allows one to enhance arbitrarily the lifetime of the excitations, giving relevant applications in the study of the quantum domain of opto-mechanical and nano-mechanical resonators. The critical frequency approach constitutes a further method of control in the scenario of environment-induced decoherence via reservoir engineering. (paper)

  12. Effect of Spatio-Temporal Variability of Rainfall on Stream flow Prediction of Birr Watershed (United States)

    Demisse, N. S.; Bitew, M. M.; Gebremichael, M.


    The effect of rainfall variability on our ability to forecast flooding events was poorly studied in complex terrain region of Ethiopia. In order to establish relation between rainfall variability and stream flow, we deployed 24 rain gauges across Birr watershed. Birr watershed is a medium size mountainous watershed with an area of 3000 km2 and elevation ranging between 1435 m.a.s.l and 3400 m.a.s.l in the central Ethiopia highlands. One summer monsoon rainfall of 2012 recorded at high temporal scale of 15 minutes interval and stream flow recorded at an hourly interval in three sub-watershed locations representing different scales were used in this study. Based on the data obtained from the rain gauges and stream flow observations, we quantify extent of temporal and spatial variability of rainfall across the watershed using standard statistical measures including mean, standard deviation and coefficient of variation. We also establish rainfall-runoff modeling system using a physically distributed hydrological model: the Soil and Water Assessment Tool (SWAT) and examine the effect of rainfall variability on stream flow prediction. The accuracy of predicted stream flow is measured through direct comparison with observed flooding events. The results demonstrate the significance of relation between stream flow prediction and rainfall variability in the understanding of runoff generation mechanisms at watershed scale, determination of dominant water balance components, and effect of variability on accuracy of flood forecasting activities.

  13. Unwrapped phase inversion with an exponential damping

    KAUST Repository

    Choi, Yun Seok


    Full-waveform inversion (FWI) suffers from the phase wrapping (cycle skipping) problem when the frequency of data is not low enough. Unless we obtain a good initial velocity model, the phase wrapping problem in FWI causes a result corresponding to a local minimum, usually far away from the true solution, especially at depth. Thus, we have developed an inversion algorithm based on a space-domain unwrapped phase, and we also used exponential damping to mitigate the nonlinearity associated with the reflections. We construct the 2D phase residual map, which usually contains the wrapping discontinuities, especially if the model is complex and the frequency is high. We then unwrap the phase map and remove these cycle-based jumps. However, if the phase map has several residues, the unwrapping process becomes very complicated. We apply a strong exponential damping to the wavefield to eliminate much of the residues in the phase map, thus making the unwrapping process simple. We finally invert the unwrapped phases using the back-propagation algorithm to calculate the gradient. We progressively reduce the damping factor to obtain a high-resolution image. Numerical examples determined that the unwrapped phase inversion with a strong exponential damping generated convergent long-wavelength updates without low-frequency information. This model can be used as a good starting model for a subsequent inversion with a reduced damping, eventually leading to conventional waveform inversion.

  14. Emotion recognition and social cognition in temporal lobe epilepsy and the effect of epilepsy surgery. (United States)

    Amlerova, Jana; Cavanna, Andrea E; Bradac, Ondrej; Javurkova, Alena; Raudenska, Jaroslava; Marusic, Petr


    The abilities to identify facial expression from another person's face and to attribute mental states to others refer to preserved function of the temporal lobes. In the present study, we set out to evaluate emotion recognition and social cognition in presurgical and postsurgical patients with unilateral refractory temporal lobe epilepsy (TLE). The aim of our study was to investigate the effects of TLE surgery and to identify the main risk factors for impairment in these functions. We recruited 30 patients with TLE for longitudinal data analysis (14 with right-sided and 16 with left-sided TLE) and 74 patients for cross-sectional data analysis (37 with right-sided and 37 with left-sided TLE) plus 20 healthy controls. Besides standard neuropsychological assessment, we administered an analog of the Ekman and Friesen test and the Faux Pas Test to assess emotion recognition and social cognition, respectively. Both emotion recognition and social cognition were impaired in the group of patients with TLE, irrespective of the focus side, compared with healthy controls. The performance in both tests was strongly dependent on the intelligence level. Beyond intelligence level, earlier age at epilepsy onset, longer disease duration, and history of early childhood brain injury predicted social cognition problems in patients with TLE. Epilepsy surgery within the temporal lobe seems to have neutral effect on patients' performances in both domains. However, there are a few individual patients who appear to be at risk of postoperative decline, even when seizure freedom is achieved following epilepsy surgery. Copyright © 2014 Elsevier Inc. All rights reserved.

  15. Ion separation in a Paul trap in the presence of damping force

    Directory of Open Access Journals (Sweden)

    I Ziaeian


    Full Text Available Dynamical behavior of particles in a Paul trap has been investigated by solving the set of differential equations considering the effect of damping force. Positions of the trapped ions as a function of time, ion trajectories and the phase space curves in the first stability region have been obtained in the presence of the damping force. The region of stability for r and z components as well as the first stability region with and without the damping force have been computed using the fourth-order Runge-Kutta method. Furthermore, for a Paul trap with specified dimensions and a typical RF frequency, the first stability region for 3H+ and 1H+ ions has been determined in the Vdc – Vac plane. It is worthwhile to note that computation of the stability region in the presence of damping force through the use of this method has been reported for the first time.

  16. Damping mechanisms in high-Q micro and nanomechanical string resonators

    DEFF Research Database (Denmark)

    Schmid, Silvan; Jensen, K. D.; Nielsen, K. H.


    been concluded that Q is enhanced due to the high energy stored in the string tension. In this paper, damping mechanisms in string resonators are systematically investigated by varying the geometry and the tensile stress of silicon nitride microstrings. The measured quality factors are compared...... to an analytical model for Q based on bending-related damping mechanisms. It is shown that internal material damping is limiting the quality factor of narrow strings with a width of 3 μm. Q is strongly width dependent and clamping losses evidently seem to be the limiting damping mechanism for wider strings....... It is further shown that Q is influenced by interference effects in the substrate and thus by the clamping of the macroscopic chip. A maximum quality factor of up to 7 million is presented for high-stress silicon nitride strings with a resonance frequency of 176 kHz....

  17. Damping capacity and dynamic mechanical characteristics of the plasma-sprayed coatings

    International Nuclear Information System (INIS)

    Yu Liming; Ma Yue; Zhou Chungen; Xu Huibin


    The damping properties and dynamic mechanical performance of NiCrAlY coating, FeCrMo ferromagnetic coating, AlCuFeCr quasicrystalline coating and nanostructured ZrO 2 ceramic coating, which were prepared by plasma-spray method, were investigated. The measuring results of the dynamic mechanical thermal analyzer (DMTA) and the flexural resonance testing method show that the damping capacity (Q -1 ) of the coated sample has a notable improvement compared to the substrate, while the dynamic modulus has a dramatic decrease. The resonance frequency of the coated cantilever beam structure shifted to high-frequency, and the resonance amplitude, especially high mode resonance, was dramatically attenuated. The internal friction peaks were observed in the Q -1 -temperature spectrogram and a normal amplitude effects were shown in the coated samples damping characteristics. The damping mechanism based on the interaction between substrate and coating layer, and the microstructure of the coated sample were also discussed in this paper

  18. Modeling and unified tuning of distributed power flow controller for damping of power system oscillations

    Directory of Open Access Journals (Sweden)

    Amin Safari


    Full Text Available A new control scheme to improve the stability of a system by optimal design of distributed power flow controller (DPFC based stabilizer is presented in this paper. The paper demonstrates the basic module, steady state operation, mathematical analysis, and current injection modeling of the DPFC. The purpose of the work reported in this paper is to design an oscillation damping controller for DPFC to damp low frequency electromechanical oscillations. The optimal design problem is formulated as an optimization problem, and particle swarm optimization (PSO is employed to search for the damping controller parameters. Results demonstrate that DPFC with the proposed model can more effectively improve the dynamic stability and enhance the transient stability of power system compared to the genetic algorithm based damping controllers. The r and λ are relative magnitude and phase angle of DPFC controller. Moreover, the results show that the λ based controller is superior to the r based controller.

  19. Acoustic damping of honeycomb-construction plates by pressure-sensitive adhesives (United States)

    Knight, D. J. E.; Pharaoh, K. I.


    Materials available as pressure sensitive adhesives in tape form are found to have suitable properties for damping acoustic vibrations in the 200 to 1000 Hz range. Comparative experiments were made to damp small honeycomb construction base plates, of length about 1 m and of thickness 50 mm, which are used for mounting lasers. Added masses bonded to the edge of the plate with the lossy adhesives are most effective in damping out of plane motion when placed where the edge has parallel rather than torsional motion for the particular Chladni's figure mode. A reduction of Q from about 100 to about 10 for modes between 218 and 800 Hz was achieved by an added 10 mass loading. When the lowest frequency mode is damped in this way the impact response sounds dead to the ear.

  20. Coupled oscillators in identification of nonlinear damping of a real parametric pendulum (United States)

    Olejnik, Paweł; Awrejcewicz, Jan


    A damped parametric pendulum with friction is identified twice by means of its precise and imprecise mathematical model. A laboratory test stand designed for experimental investigations of nonlinear effects determined by a viscous resistance and the stick-slip phenomenon serves as the model mechanical system. An influence of accurateness of mathematical modeling on the time variability of the nonlinear damping coefficient of the oscillator is proved. A free decay response of a precisely and imprecisely modeled physical pendulum is dependent on two different time-varying coefficients of damping. The coefficients of the analyzed parametric oscillator are identified with the use of a new semi-empirical method based on a coupled oscillators approach, utilizing the fractional order derivative of the discrete measurement series treated as an input to the numerical model. Results of application of the proposed method of identification of the nonlinear coefficients of the damped parametric oscillator have been illustrated and extensively discussed.

  1. Damping in heat exchanger tube bundles. A review

    International Nuclear Information System (INIS)

    Iqbal, Qamar; Khushnood, Shahab; Ghalban, Ali Roheim El; Sheikh, Nadeem Ahmed; Malik, Muhammad Afzaal; Arastu, Asif


    Damping is a major concern in the design and operation of tube bundles with loosely supported tubes in baffles for process shell and tube heat exchangers and steam generators which are used in nuclear, process and power generation industries. System damping has a strong influence on the amplitude of vibration. Damping depends upon the mechanical properties of the tube material, geometry of intermediate supports and the physical properties of shell-side fluid. Type of tube motion, number of supports, tube frequency, vibration amplitude, tube mass or diameter, side loads, support thickness, higher modes, shell-side temperature etc., affect damping in tube bundles. The importance of damping is further highlighted due to current trend of larger exchangers with increased shell-side velocities in modern units. Various damping mechanisms have been identified (Friction damping, Viscous damping, Squeeze film damping, Support damping. Two-Phase damping, and very recent-Thermal damping), which affect the performance of process exchangers and steam generators with respect to flow induced vibration design, including standard design guidelines. Damping in two-phase flow is very complex and highly void fraction, and flow-regime dependent. The current paper focuses on the various known damping mechanisms subjected to both single and two-phase cross-flow in process heat exchangers and steam generators and formulates the design guidelines for safer design. (author)

  2. Design of Weighted Wide Area Damping Controller (WWADC Based PSS for Damping Inter-Area Low Frequency Oscillations

    Directory of Open Access Journals (Sweden)

    Saleh M. Bamasak


    Full Text Available Wide Area Measurement System (WAMS can extend and effectively improve the power system stabilizers (PSS capability in damping the inter-area low frequency oscillations in interconnected bulk power systems. This paper proposes the implementation of Weighted Wide Area Damping Controller (WWADC in which weighted factors are introduced for each remote feedback signals. Modal analysis approach is implemented for the purpose of identifying the optimal location as well as the input signals’ optimal combination of WWADC. Based on the linearized model, Differential Evolution (DE algorithm is applied to search for optimal controller parameters and optimal weighted factors. The successful application of the proposed approach is achieved in two power networks; the two-area 4-machine system and the IEEE-39 bus 10-machine system. The analysis of the eigenvalue and non-linear time domain simulations indicate that damping the inter-area oscillations and improving the system stability irrespective of the severity and the location of the disturbances can be effectively achieved by WADC

  3. Design of the APS transverse and longitudinal damping system

    International Nuclear Information System (INIS)

    Sellyey, W.; Barr, D.; Kahana, E.; Votaw, A.


    The main sources of instabilities in the Advanced Photon Source (APS) storage ring are expected to be higher-order modes (HOMs) of the accelerating cavities and the resistive wall impedance of the small insertion devices beam tubes. Extensive efforts are being made to reduce the Qs of HOMs. The maximum operating current of the ring will be 300 mA. At this current, analysis of measurements on cavity prototypes shows that the transverse growth rates will be less than 500/sec above radiation damping. The longitudinal growth rate due to HOMs is predicted to never exceed the radiation damping of 213/sec. The largest transverse resistive wall growth rate is calculated to be 2720/sec when 54 evenly spaced rigid bunches are used to produce 300 mA. There will be 26 additional unstable modes. The sum of these growth rates is 17,163/sec. Thus, it is clear that an effective transverse damping system will be needed and that the strength of this damper will be dominated by the resistive wall modes. A longitudinal damper system will also be built. This will provide damping about 2/3 times that due to synchrotron radiation. The most serious disturbances which can initiate instabilities will take place at injection. Typically, each bunch in the ring will be accumulated by injecting 115 of the final charge five times. A standard mode of operation is used in this paper in which there will be 54 evenly spaced bunches around the ring. During the ring filling process, the highest growth rates will occur when the last fifth of a bunch is injected into the last bunch. The largest expected vertical excursion of 1/5 of a bunch is about 5 mm. Anything larger will cause the bunch to scrape in the insertion device sections

  4. Passively damped vibration welding system and method (United States)

    Tan, Chin-An; Kang, Bongsu; Cai, Wayne W.; Wu, Tao


    A vibration welding system includes a controller, welding horn, an anvil, and a passive damping mechanism (PDM). The controller generates an input signal having a calibrated frequency. The horn vibrates in a desirable first direction at the calibrated frequency in response to the input signal to form a weld in a work piece. The PDM is positioned with respect to the system, and substantially damps or attenuates vibration in an undesirable second direction. A method includes connecting the PDM having calibrated properties and a natural frequency to an anvil of an ultrasonic welding system. Then, an input signal is generated using a weld controller. The method includes vibrating a welding horn in a desirable direction in response to the input signal, and passively damping vibration in an undesirable direction using the PDM.

  5. Minimum wakefield achievable by waveguide damped cavity

    International Nuclear Information System (INIS)

    Lin, X.E.; Kroll, N.M.


    The authors use an equivalent circuit to model a waveguide damped cavity. Both exponentially damped and persistent (decay t -3/2 ) components of the wakefield are derived from this model. The result shows that for a cavity with resonant frequency a fixed interval above waveguide cutoff, the persistent wakefield amplitude is inversely proportional to the external Q value of the damped mode. The competition of the two terms results in an optimal Q value, which gives a minimum wakefield as a function of the distance behind the source particle. The minimum wakefield increases when the resonant frequency approaches the waveguide cutoff. The results agree very well with computer simulation on a real cavity-waveguide system

  6. High temporal resolution in situ measurement of the effective particle size characteristics of fluvial suspended sediment. (United States)

    Williams, N D; Walling, D E; Leeks, G J L


    This paper reports the use of a LISST-100 device to monitor the effective particle size characteristics of suspended sediment in situ, and at a quasi-continuous temporal resolution. The study site was located on the River Exe at Thorverton, Devon, UK. This device has not previously been utilized in studies of fluvial suspended sediment at the storm event scale, and existing studies of suspended sediment dynamics have not involved such a high temporal resolution for extended periods. An evaluation of the field performance of the instrument is presented, with respect to innovative data collection and analysis techniques. It was found that trends in the effective particle size distribution (EPSD) and degree of flocculation of suspended sediment at the study site were highly complex, and showed significant short-term variability that has not previously been documented in the fluvial environment. The collection of detailed records of EPSD facilitated interpretation of the dynamic evolution of the size characteristics of suspended sediment, in relation to its likely source and delivery and flocculation mechanisms. The influence of measurement frequency is considered in terms of its implications for future studies of the particle size of fluvial suspended sediment employing in situ data acquisition.

  7. Effects of radiation on the temporal bone in patients with head and neck cancer. (United States)

    Lambert, Elton M; Gunn, G Brandon; Gidley, Paul W


    Radiotherapy is a key component in the treatment of many head and neck cancers, and its potential to cause long-term adverse effects has become increasingly recognized. In this review, we describe the short-term and long-term sequelae of radiation-associated changes in and injury to the temporal bone and its related structures. The pathophysiology of radiation-induced injury and its clinical entities, including sensorineural hearing loss, chronic otitis media, osteoradionecrosis, and radiation-associated malignancies, are described. We also discuss radiation dose to the head and neck as it relates to these conditions. An improved understanding of radiation's effects on the temporal bone will enable physicians and researchers to continue efforts to reduce radiotherapy-related sequelae and guide clinicians in diagnosing and treating the various otologic conditions that can arise in patients with head and neck cancer who have received radiotherapy. © 2016 Wiley Periodicals, Inc. Head Neck 38: 1428-1435, 2016. © 2016 Wiley Periodicals, Inc.

  8. Active and semiactive vibration damping of turbine blades with piezoceramics (United States)

    Hohl, A.; Neubauer, M.; Schwarzendahl, S. M.; Panning, L.; Wallaschek, J.


    In this paper the damping capability of piezoelectric shunting is analysed for bladings. Beside the broadly used inductance-resistance networks, negative capacitance techniques are considered. For the validation of the theoretic results, a test rig with a model of a bladed disk with eight blades has been manufactured and equipped with two collocated piezoceramics at each blade. One of the piezoceramics is used as an actuator for an engine order excitation. The second piezoceramics is used for shunt damping. The experimental results of the test rig are compared with numerical results. Therefore, the structure and the piezoceramics are modeled in a finite element program. The modal excitation forces of the piezoelectric actuators are derived for all modes of the structure by a static analysis with a specific voltage applied to the piezoceramics. In addition, using the modal displacement field of the static analysis the modal excitation forces can be calculated. Furthermore, the number of degrees of freedom of the system is reduced by a modal reduction technique. The electrical behavior of the piezoceramics connected to each blade is modeled by one degree of freedom and coupled with the mechanical system described above. The different damping concepts are compared with respect of their effectiveness.

  9. Variable Damping Force Tunnel for Gait Training Using ALEX III. (United States)

    Stegall, Paul; Zanotto, Damiano; Agrawal, Sunil K


    Haptic feedback affects not only the quality of training but can also influence the physical design of robotic gait trainers by determining how much force needs to be applied to the user and the nature of the force. This paper presents the design of a variable damping force tunnel and explores the effect of the shape and strength of the damping field using ALEX III, a treadmill-based exoskeleton developed at Columbia University. The study consists of 32 healthy subjects who were trained for 40 minutes in the device. The subjects were trained to follow a footpath with a 50% increase in step height, so the foot would have 1.5 times the ground clearance. Subjects were assigned to one of four groups: linear high, linear low, parabolic high, and parabolic low. Linear or parabolic denotes the shape of the damping field, and high or low denotes the rate of change (strength) of the field based on error. It is shown that the new controller is capable of inducing gait adaptations in healthy individuals while walking in the device. All groups showed adaptations in step height, while only the high strength groups showed changes in normalized error area, a measure of how closely the desired path was followed.

  10. Unimodal optimal passive electromechanical damping of elastic structures (United States)

    Ben Mekki, O.; Bourquin, F.; Maceri, F.; Merliot, E.


    In this paper, a new electromechanical damper is presented and used, made of a pendulum oscillating around an alternator axis and connected by a gear to the vibrating structure. In this way, the mechanical energy of the oscillating mass can be transformed into electrical energy to be dissipated when the alternator is branched on a resistor. This damping device is intrinsically non-linear, and the problem of the optimal parameters and of the best placement of this damper on the structure is studied. The optimality criterion chosen here is the maximum exponential time decay rate (ETDR) of the structural response. This criterion leads to new design formulas. The case of a bridge under construction is considered and the analytical results are compared with experimental ones, obtained on a mock-up made of a vertical tower connected to a free-end horizontal beam, to simulate the behavior of a cable-stayed bridge during the erection phase. Up to three electromechanical dampers are placed in order to study the multi-modal damping. The satisfactory agreement between the theoretical model and the experiments suggests that a multi-modal passive damping of electromagnetic type could be effective on lightweight flexible structures, when dampers are suitably placed.

  11. Study on the Damping of the Discontinuous Deformation Analysis Based on Two-Block Model

    Directory of Open Access Journals (Sweden)

    Xixia Feng


    Full Text Available The deformation and failure of rock mass is a process of energy dissipation; the damping of DDA is a very important and basic problem. The correctness and effectiveness of DDA rely on the appropriate values of the numeric controlling parameters like time interval, spring stiffness, and assumed maximum displacement ratio g2, and the contact using the penalty method is the core content of DDA. A mechanical model of two contact blocks loaded with the normal force acting along one side of block boundary is established to study the DDA damping problem, which involves the contact and eliminates the influence of some numeric control parameters (e.g., g2. Based on the Newmark method and the theory of DDA, the motion equations of two-block system can be established, and then the relationship of some numeric control parameters and the influence of damping can be obtained. The algorithmic damping increases with the increasing of time interval. Given a very small time interval, the spring stiffness may have no obvious effect on the algorithmic damping. The numerical results reveal that the essence of time interval influencing the open-close iteration is the fact that the algorithmic damping is mainly controlled by time interval.

  12. Construction Practices Contributing to Rising Damp in Kumasi Metropolitan and Ejisu Municipal Assemblies in Ghana

    Directory of Open Access Journals (Sweden)

    Richard Oduro Asamoah


    Full Text Available Buildings represent significant investment of developers and, as such, it is important to ensure value for the capital injected into the construction of buildings. Unfortunately, due to neglect of proper construction practices, buildings are facing defects, and one of such defects is rising damp. This study sought to identify some of the construction practices contributing to rising damp in buildings and their effects and suggest some remedial measures for controlling and treatment of rising damps. Snowball sampling and purposive sampling techniques were used to gather data from a cross section of 78 building environment professionals in Kumasi and Ejisu who have experienced the effects of moisture rise. Relative Importance Index was used to rank the significance of the causes. The study revealed that failure to use damp-proof membrane or course, presence of groundwater, porosity of masonry, and concrete element sand flooding were the main causes of rising damp. Undersetting and saw slotting, making good plumbing leakages, using approved waterproof chemical injection, and application of admixtures were the main measures recommended to avert rising damp.

  13. Damping in Materials for Spintronic Applications (United States)

    Mewes, Claudia

    The next generation of spintronic devices relies strongly on the development of new materials with high spin polarization, optimized intrinsic damping and tunable magnetic anisotropy. Therefore, technological progress in this area depends heavily on the successful search for new materials as well as on a deeper understanding of the fundamental mechanisms of the spin polarization, the damping and the magnetic anisotropy. This talk will focus on different aspects of materials with a low intrinsic relaxation rate. Our results are based on first principles calculations in combination with a non-orthogonal tight-binding model to predict those material properties for complex materials which can be used for example in new spin based memory devices or logic devices. However, the intrinsic damping parameter predicted from first principle calculations does not take into account adjacent layers that are present in the final device. Spin pumping is a well-known contribution that has to be taken into account for practical applications using multilayer structures. More recently a strong unidirectional contribution to the relaxation in exchange bias systems has been observed experimentally. To describe this phenomenon theoretically we use the formalism of an anisotropic Gilbert damping tensor that takes the place of the (scalar) Gilbert damping parameter in the Landau-Lifshitz-Gilbert equation of motion. While for single crystals this anisotropy is expected to be small, making experimental confirmation difficult, the broken symmetry in exchange bias systems provides an excellent testing ground to study the modified magnetization dynamics under the influence of unidirectional damping. C.K.A. Mewes would like to thank her colleague T. Mewes and her students J.B. Mohammadi, A.E. Farrar. We acknowledge support by the NSF-CAREER Award No. 1452670, and NSF-CAREER Award No. 0952929.

  14. Assessing Equivalent Viscous Damping Using Piping System test Results

    Energy Technology Data Exchange (ETDEWEB)

    Nie, J.; Morante, R.


    The specification of damping for nuclear piping systems subject to seismic-induced motions has been the subject of many studies and much controversy. Damping estimation based on test data can be influenced by numerous factors, consequently leading to considerable scatter in damping estimates in the literature. At present, nuclear industry recommendations and nuclear regulatory guidance are not consistent on the treatment of damping for analysis of nuclear piping systems. Therefore, there is still a need to develop a more complete and consistent technical basis for specification of appropriate damping values for use in design and analysis. This paper summarizes the results of recent damping studies conducted at Brookhaven National Laboratory.

  15. Damping of multispan heat exchanger tubes. Pt. 1: in gases

    International Nuclear Information System (INIS)

    Pettigrew, M.J.; Goyder, H.G.D.; Qiao, Z.L.; Axisa, F.


    Flow-induced vibration analyses of heat exchanger tubes require the knowledge of damping. This paper treats the question of damping on multispan heat exchanger tubes in air and gases. The different energy dissipation mechanisms that contribute to tube damping are discussed. The available experimental data are reviewed and analysed. We find that the main damping mechanism in gases is friction between tube and tube-supports. Damping is strongly related to tube-support thickness. Damping values are recommended for design purposes. This study is interesting in the nuclear industry for it often uses heat exchangers

  16. Damping of Crank–Nicolson error oscillations

    DEFF Research Database (Denmark)

    Britz, Dieter; Østerby, Ole; Strutwolf, J.


    The Crank–Nicolson (CN) simulation method has an oscillatory response to sharp initial transients. The technique is convenient but the oscillations make it less popular. Several ways of damping the oscillations in two types of electrochemical computations are investigated. For a simple one...... be computationally more expensive with some systems. The simple device of starting with one backward implicit (BI, or Laasonen) step does damp the oscillations, but not always sufficiently. For electrochemical microdisk simulations which are two-dimensional in space and using CN, the use of a first BI step is much...

  17. Damping in accelerators due to classical radiation

    International Nuclear Information System (INIS)

    Mills, F.E.


    The rates of change of the magnitudes of the adiabatic invariants is calculated in the case of a Hamiltonian system subjected to generalized non conservative forces. These results are applied to the case of the classical radiation of electrons in an accelerator or storage ring. The resulting expressions for the damping rates of three independent oscillation modes suggest structures which are damping in all three modes, while at the same time allowing 'strong focussing' and the attendant strong momentum compaction. (author)

  18. Strengthening and damping of synchrotron oscillations

    International Nuclear Information System (INIS)

    Taratin, A.M.


    Resonance strengthening and damping of synchrotron oscillations of collider bunch halo particles was studied by simulation. It was shown that the strengthening of particle synchrotron oscillations can be highly efficient with using a resonance pulse sequence. The resonance damping of particle synchrotron oscillations is only possible when the inverse population of the accelerated bunch halo is realized. Resonance method of synchrotron oscillation strengthening can be used for the extraction of beam halo particles with a bent crystal to improve the background conditions for colliding beam experiments and to fulfill simultaneously some fixed target experiments

  19. Visual paired-associate learning: in search of material-specific effects in adult patients who have undergone temporal lobectomy. (United States)

    Smith, Mary Lou; Bigel, Marla; Miller, Laurie A


    The mesial temporal lobes are important for learning arbitrary associations. It has previously been demonstrated that left mesial temporal structures are involved in learning word pairs, but it is not yet known whether comparable lesions in the right temporal lobe impair visually mediated associative learning. Patients who had undergone left (n=16) or right (n=18) temporal lobectomy for relief of intractable epilepsy and healthy controls (n=13) were administered two paired-associate learning tasks assessing their learning and memory of pairs of abstract designs or pairs of symbols in unique locations. Both patient groups had deficits in learning the designs, but only the right temporal group was impaired in recognition. For the symbol location task, differences were not found in learning, but again a recognition deficit was found for the right temporal group. The findings implicate the mesial temporal structures in relational learning. They support a material-specific effect for recognition but not for learning and recall of arbitrary visual and visual-spatial associative information. Copyright © 2010 Elsevier Inc. All rights reserved.

  20. A dispersion-balanced Discrete Fourier Transform of repetitive pulse sequences using temporal Talbot effect (United States)

    Fernández-Pousa, Carlos R.


    We propose a processor based on the concatenation of two fractional temporal Talbot dispersive lines with balanced dispersion to perform the DFT of a repetitive electrical sequence, for its use as a controlled source of optical pulse sequences. The electrical sequence is used to impart the amplitude and phase of a coherent train of optical pulses by use of a modulator placed between the two Talbot lines. The proposal has been built on a representation of the action of fractional Talbot effect on repetitive pulse sequences and a comparison with related results and proposals. It is shown that the proposed system is reconfigurable within a few repetition periods, has the same processing rate as the input optical pulse train, and requires the same technical complexity in terms of dispersion and pulse width as the standard, passive pulse-repetition rate multipliers based on fractional Talbot effect.

  1. The effects of visual material and temporal synchrony on the processing of letters and speech sounds. (United States)

    Mittag, Maria; Takegata, Rika; Kujala, Teija


    Associating letters with speech sounds is essential for reading skill acquisition. In the current study, we aimed at determining the effects of different types of visual material and temporal synchrony on the integration of letters and speech sounds. To this end, we recorded the mismatch negativity (MMN), an index of automatic change detection in the brain, from literate adults. Subjects were presented with auditory consonant-vowel syllable stimuli together with visual stimuli, which were either written syllables or scrambled pictures of the written syllables. The visual stimuli were presented in half of the blocks synchronously with the auditory stimuli and in the other half 200 ms before the auditory stimuli. The auditory stimuli were consonant, vowel or vowel length changes, or changes in syllable frequency or intensity presented by using the multi-feature paradigm. Changes in the auditory stimuli elicited MMNs in all conditions. MMN amplitudes for the consonant and frequency changes were generally larger for the sounds presented with written syllables than with scrambled syllables. Time delay diminished the MMN amplitude for all deviants. The results suggest that speech sound processing is modulated when the sounds are presented with letters versus non-linguistic visual stimuli, and further, that the integration of letters and speech sounds seems to be dependent on precise temporal alignment. Moreover, the results indicate that with our paradigm, a variety of parameters relevant and irrelevant for reading can be tested within one experiment.

  2. Damping and fluidelastic instability in two-phase cross-flow heat exchanger tube arrays (United States)

    Moran, Joaquin E.

    flux, and its dependency is a function of void fraction. A dimensional analysis was carried out to investigate the relationship between damping and two-phase flow related parameters. As a result, the inclusion of surface tension in the form of the Capillary number appears to be useful when combined with the two-phase component of the damping ratio (interfacial damping). A strong dependence of damping on flow regime was observed when plotting the interfacial damping versus the void fraction, introducing an improvement over the previous result obtained by normalizing the two-phase damping, which does not exhibit this behaviour. The interfacial velocity model was selected to represent the fluidelastic data in two-phase experiments, due to the inclusion of the tube array geometry and density ratio effects, which does not exist for the pitch velocity approach. An essential component in reliably establishing the velocity threshold for fluidelastic instability, is a measure of the energy dissipation available in the system to balance the energy input from the flow. The present analysis argues that the damping in-flow is not an appropriate measure and demonstrates that the use of quiescent fluid damping provides a better measure of the energy dissipation, which produces a much more logical trend in the stability behaviour. This value of damping, combined with the RAD density and the interfacial velocity, collapses the available data well and provides the expected trend of two-phase flow stability data over the void fraction range from liquid to gas flows. The resulting stability maps represent a significant improvement over existing maps for predicting fluidelastic instability of tube bundles in two-phase flows. This result also tends to confirm the hypothesis that the basic mechanism of fluidelastic instability is the same for single and two-phase flows.

  3. Reliable Channel-Adapted Error Correction: Bacon-Shor Code Recovery from Amplitude Damping (United States)

    Piedrafita, Álvaro; Renes, Joseph M.


    We construct two simple error correction schemes adapted to amplitude damping noise for Bacon-Shor codes and investigate their prospects for fault-tolerant implementation. Both consist solely of Clifford gates and require far fewer qubits, relative to the standard method, to achieve exact correction to a desired order in the damping rate. The first, employing one-bit teleportation and single-qubit measurements, needs only one-fourth as many physical qubits, while the second, using just stabilizer measurements and Pauli corrections, needs only half. The improvements stem from the fact that damping events need only be detected, not corrected, and that effective phase errors arising due to undamped qubits occur at a lower rate than damping errors. For error correction that is itself subject to damping noise, we show that existing fault-tolerance methods can be employed for the latter scheme, while the former can be made to avoid potential catastrophic errors and can easily cope with damping faults in ancilla qubits.

  4. Control of Full-Scale Converter based Wind Power Plants for damping of low frequency system oscillations

    DEFF Research Database (Denmark)

    Adamczyk, Andrzej Grzegorz; Teodorescu, Remus; Rodriguez, Pedro


    Damping of low frequency power oscillations is one of essential aspects of maintaining power system stability. In literature can be found publications on damping capability of Doubly Fed Induction Generator based wind turbines. This paper extends discussion on Wind Power Plant damping capability...... and design is based on modal analysis, therefore matching modeling approach for wind power plant is proposed. Finally, performance of Wind Power Plant damping control is compared to a regular power system stabilizer installed on a synchronous generator....... to Full-Scale Converter based type. Moreover resemblance of such Wind Power Plant to modern FACTS devices is recognized and exploited. Paper discusses many aspect of damping controller design, including feedback signal selection and control effectiveness with respect to wind farm location. Analysis...

  5. Power flow control and damping enhancement of a large wind farm using a superconducting magnetic energy storage unit

    DEFF Research Database (Denmark)

    Chen, S. S.; Wang, L.; Lee, W. J.


    A novel scheme using a superconducting magnetic energy storage (SMES) unit to perform both power flow control and damping enhancement of a large wind farm (WF) feeding to a utility grid is presented. The studied WF consisting of forty 2 MW wind induction generators (IGs) is simulated...... by an equivalent 80 MW IG. A damping controller of the SMES unit is designed based on the modal control theory to contribute proper damping characteristics to the studied WF under different wind speeds. A frequency-domain approach based on a linearised system model using eigen techniques and a time-domain scheme...... based on a nonlinear system model subject to disturbance conditions are both employed to validate the effectiveness of the proposed SMES unit with the designed SMES damping controller. It can be concluded from the simulated results that the proposed SMES unit combined with the designed damping...

  6. Coupling between temporal and spatial chaos of vortex state in superconductors with periodical pinning arrays

    Energy Technology Data Exchange (ETDEWEB)

    Lin, H.T. [Department of Information Management, Cheng Shiu University, Kaoshuing, Taiwan (China); Cheng, C.H. [Key Laboratory of Magnetic Levitation and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Ke, C.; Pan, M. [School of Materials Science and Engineering, University of New South Wale, Sydney, 2052 NSW (Australia); Zhao, Y., E-mail: [Key Laboratory of Magnetic Levitation and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China)] [School of Materials Science and Engineering, University of New South Wale, Sydney, 2052 NSW (Australia)


    Mean field approach is a good way of dealing with chaos of vortex motion in a background of many vortices. The vortex motion under the damping mode is a kind of self-organized motion. The spatial chaos can dominate the chaotic behavior of the system. Vortex motion in the background of many vortices is investigated by a mean field approach. Effects of the vortex-vortex coupling, the driving frequency, and the vortex viscosity on the vortex motion have been studied to reveal the interaction between the spatial and temporal chaos. It is found that the mean-field approach is a good approximation to describe the vortex motion in one dimensional vortex system. The vortex motion under the damping mode is a kind of self-organized motion. The spatial chaos can dominate the chaotic behavior of the system.

  7. Spatial and temporal effects of olive mill wastewaters to stream macroinvertebrates and aquatic ecosystems status. (United States)

    Karaouzas, Ioannis; Skoulikidis, Nikolaos T; Giannakou, Urania; Albanis, Triantafyllos A


    Olive mill wastewater (OMW) is one of the major and most challenging organic pollutants in olive oil production countries. However, the knowledge about the in-situ effects of olive mill wastewaters to lotic ecosystems and their benthic organisms is very limited. To resolve this, eight sampling sites were selected upstream and downstream the outflow of several olive mills to assess the spatial and temporal effects of OMW to stream macroinvertebrates and to ecological status of stream ecosystems. Biotic (macroinvertebrates) and abiotic (physicochemical, hydromorphological) data were monitored for two years thus following the biennial cycle of olive growth and production and hydrological variation (drought-wet years). The results of this study revealed the spatial and temporal structural deterioration of the aquatic community due to OMW pollution with consequent reduction of the river capacity for reducing the effects of polluting substances through internal mechanisms of self-purification. OMW, even highly diluted, had dramatic impacts on the aquatic fauna and to the ecological status of the receiving stream ecosystems. The organic load of the wastewater expressed as BOD(5), COD and TSS, substrate contamination (sewage bacteria) and distance from the mill outlet, were the most important factors affecting macroinvertebrate assemblages while the typology (i.e. slope, altitude) and hydrology of the stream site (i.e. mountainous-lowland) and the intensity and volume of the wastewater were the most important determinants of self-purification processes. As OMW are usually being discharged in small size streams that are not considered in the Water Framework Directive 2000/60/EC, there is a need for including such systems into monitoring and assessment schemes as they may significantly contribute to the pollution load of the river basin. Furthermore, guidelines to manage these wastes through technologies that minimise their environmental impact and lead to a sustainable use

  8. Effect of spatio-temporal noise in the Eddington factor on the scalar flux

    International Nuclear Information System (INIS)

    Prinja, Anil K.


    Highlights: • Spatio-temporal Gaussian noise is considered in the Eddington factor simulating noise in the low-order equation associated with a hybrid numerical solution technique for the transport equation. • A closed equation for the mean scalar flux is obtained that is accurate for small correlation times and exact in the white noise limit. • The equation for the mean scalar flux contains a fourth-order spatial derivative that is a consequence of the noise. • The fourth-order term is shown to destabilize all perturbations with wavelengths less than a critical value that depends on the noise amplitude, correlation length and time. • An asymptotic solution is shown to be possible for small noise amplitude. - Abstract: Spatial and temporal noise in the Eddington factor, simulating noise arising in hybrid numerical schemes, is modeled as a Gaussian stochastic process and its effect on the scalar flux investigated theoretically. In the small correlation time limit, a nonstandard closed equation for the mean scalar flux is obtained that contains a fourth order derivative of the scalar flux. In an infinite medium setting, this term is shown to have a destabilizing effect on the solution. Specifically, any spatial Fourier mode with wavelength smaller than a critical value, which depends on the noise characteristics, amplifies in time without bound, in contrast to the corresponding nonrandom case which is dissipative for all modes. An asymptotic solution is obtained which shows that the noise effect disappears at late times and the scalar flux limits to the deterministic solution.

  9. Temporal priority effects on competition are not consistent among intermountain grassland species (United States)

    Zuo, Shengpeng; Li, Hongli; Ma, Yongqing; Callaway, Ragan M.


    Previous work indicates that priority effects exist, but mechanisms are not well understood. So we explored shifts in competitive outcomes and intensities as a potential general mechanism. In a standard greenhouse experiment the temporal priority effects of the target species Pseudoroegneria spicata and its competitive responses to five receptor species, i.e., Bromus ciliatus, Bromus marginatus, Coreopsis tinctoria, Senecio atratus, and Solidago canadensis were evaluated. P. spicata adults with a high root: shoot ratio had a significant inhibitory priority effect on B. ciliatus, B. marginatus, and C. tinctoria. Compared with the target species, under later and simultaneous sowing, B. ciliatus, B. marginatus, C. tinctoria, and S. atratus exhibited an increasing trend in terms of competition. However, S. canadensis did not display priority effects. In addition, the gram per gram competitive effect of P. spicata depended on the receptor species in the following order: B. marginatus > B. ciliatus > C. tinctoria > S. atratus. There were positive relationships between the relative interaction indices and the root: shoot ratios in B. ciliatus, B. marginatus, and C. tinctoria, thereby suggesting that the early germination or emergence of P. spicata may reduce the root: shoot ratios of these receptors. The results of this study indicate that priority effects occurred in early colonizers with high root: shoot ratios and greater competitive capacities.

  10. Resonant Electromagnetic Shunt Damping of Flexible Structures

    DEFF Research Database (Denmark)

    Høgsberg, Jan Becker


    resonance and a resistor to dissipate the correct amount of vibration energy. The modal interaction with residual vibration forms not targeted by the resonant shunt is represented by supplemental flexibility and inertia terms. This leads to modified calibration formulae that maintain the desired damping...

  11. Rage mediated DAMP signaling in intestinal tumorigenesis

    NARCIS (Netherlands)

    Heijmans, Jarom; Büller, Nikè V. J. A.; Muncan, Vanesa; van den Brink, Gijs R.


    In the intestine, a large variety of pathogen-associated molecular patterns (PAMPs) and damage-associated molecular patterns (DAMPs) can instigate innate immune responses, which have been shown to promote colorectal carcinogenesis. We have recently demonstrated an important role for the receptor for

  12. Spatial Damping of Linear Compressional Magnetoacoustic Waves ...

    Indian Academy of Sciences (India)


    Jan 27, 2016 ... We study the spatial damping of magnetoacoustic waves in an unbounded quiescent prominence invoking the technique of MHD seismology. We consider Newtonian radiation in the energy equation and derive a fourth order general dispersion relation in terms of wavenumber . Numerical solution of ...

  13. The DAMPE silicon–tungsten tracker

    Energy Technology Data Exchange (ETDEWEB)

    Azzarello, P., E-mail: [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Ambrosi, G. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); Asfandiyarov, R. [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Bernardini, P. [Dipartimento di Matematica e Fisica “E. De Giorgi”, Università del Salento, Lecce (Italy); Istituto Nazionale di Fisica Nucleare Sezione di Lecce, Lecce (Italy); Bertucci, B.; Bolognini, A. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); Dipartimento di Fisica e Geologia, Università di Perugia, Perugia (Italy); Cadoux, F. [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Caprai, M. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); De Mitri, I. [Dipartimento di Matematica e Fisica “E. De Giorgi”, Università del Salento, Lecce (Italy); Istituto Nazionale di Fisica Nucleare Sezione di Lecce, Lecce (Italy); Domenjoz, M. [Département de Physique Nucléaire et Corpusculaire, University of Geneva, Geneva (Switzerland); Dong, Y. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing (China); Duranti, M. [Istituto Nazionale di Fisica Nucleare Sezione di Perugia, Perugia (Italy); Dipartimento di Fisica e Geologia, Università di Perugia, Perugia (Italy); Fan, R. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing (China); and others


    The DArk Matter Particle Explorer (DAMPE) is a spaceborne astroparticle physics experiment, launched on 17 December 2015. DAMPE will identify possible dark matter signatures by detecting electrons and photons in the 5 GeV–10 TeV energy range. It will also measure the flux of nuclei up to 100 TeV, for the study of the high energy cosmic ray origin and propagation mechanisms. DAMPE is composed of four sub-detectors: a plastic strip scintillator, a silicon–tungsten tracker–converter (STK), a BGO imaging calorimeter and a neutron detector. The STK is composed of six tracking planes of 2 orthogonal layers of single-sided micro-strip detectors, for a total detector surface of ca. 7 m{sup 2}. The STK has been extensively tested for space qualification. Also, numerous beam tests at CERN have been done to study particle detection at silicon module level, and at full detector level. After description of the DAMPE payload and its scientific mission, we will describe the STK characteristics and assembly. We will then focus on some results of single ladder performance tests done with particle beams at CERN.

  14. Dry friction damping couple at high frequencies

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav; Pešek, Luděk; Košina, Jan; Radolfová, Alena


    Roč. 8, č. 1 (2014), s. 91-100 ISSN 1802-680X Institutional support: RVO:61388998 Keywords : dry friction * damping * high frequencies Subject RIV: BI - Acoustics

  15. Mode damping in a commensurate monolayer solid

    DEFF Research Database (Denmark)

    Bruch, Ludwig Walter; Hansen, Flemming Yssing


    The normal modes of a commensurate monolayer solid may be damped by mixing with elastic waves of the substrate. This was shown by Hall, Mills, and Black [Phys. Rev. B 32, 4932 (1985)], for perpendicular adsorbate vibrations in the presence of an isotropic elastic medium. That work is generalized...

  16. Vibration and Sound Damping in Polymers

    Indian Academy of Sciences (India)

    IAS Admin

    The damping property of rubbers is utilized in products like vibration damper ... engineering rubber products used for vibration isolation. In Greek, .... Natural rubber. – 73. Poly(methyl methacrylate) 105. Butadiene rubber. – 100. Polycarbonate. 145. Silicone rubber. – 127. Polynorbornene. 215. Table 1. Comparing the Tg of.

  17. Damping mechanisms and models in structural dynamics

    DEFF Research Database (Denmark)

    Krenk, Steen


    Several aspects of damping models for dynamic analysis of structures are investigated. First the causality condition for structural response is used to identify rules for the use of complex-valued frequency dependent material models, illustrated by the shortcomings of the elastic hysteretic model...

  18. Stiffness and damping in mechanical design

    National Research Council Canada - National Science Library

    Rivin, Eugene I


    ... important conceptual issues are stiffness of mechanical structures and their components and damping in mechanical systems sensitive to and/or generating vibrations. Stiffness and strength are the most important criteria for many mechanical designs. However, although there are hundreds of books on various aspects of strength, and strength issues ar...

  19. Factors controlling superelastic damping capacity of SMAs

    Czech Academy of Sciences Publication Activity Database

    Heller, Luděk; Šittner, Petr; Pilch, Jan; Landa, Michal


    Roč. 18, 5-6 (2009), 603-611 ISSN 1059-9495 Institutional research plan: CEZ:AV0Z10100520; CEZ:AV0Z20760514 Keywords : shape memory alloys * superelastic damping * thermomechanical testing Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.592, year: 2009

  20. Structural dynamic modification using additive damping

    Indian Academy of Sciences (India)

    In order to control dynamic response in structures and machines, modofications using additive viscoelastic damping materials are highlighted. The techniques described for analysis include analytical methods for structural elements, FEM and perturbation methods for reanalysis or structural dynamic modifications for ...

  1. Damped time advance methods for particles and EM fields

    International Nuclear Information System (INIS)

    Friedman, A.; Ambrosiano, J.J.; Boyd, J.K.; Brandon, S.T.; Nielsen, D.E. Jr.; Rambo, P.W.


    Recent developments in the application of damped time advance methods to plasma simulations include the synthesis of implicit and explicit ''adjustably damped'' second order accurate methods for particle motion and electromagnetic field propagation. This paper discusses this method

  2. Development of magnetorheological elastomers based on Deproteinised natural rubber as smart damping materials (United States)

    Ismail, Nik Intan Nik; Kamaruddin, Shamsul


    Magnetorheological elastomers (MREs) are composite materials consist of micron-sized magnetizable particles carbonyl iron particles [CIPs]) embedded in a soft elastomer matrix. MRE technology offers variable stiffness and damping properties under the influence of a magnetic field. Herein, the feasibility of incorporating a new generation specialty rubber, Pureprena as a matrix for MREs was investigated. Pureprena or Deproteinised Natural Rubber (DPNR) is a specialty natural rubber that has good dynamic properties, particularly with respect to damping parameters. DPNR was compounded with 60 wt% of CIPs to fabricate MREs. The performance of the DPNR-based MRE was measured in terms of tensile strength, dynamic properties, and magnetorheological (MR) effect and compared with polyisoprene (IR)-based MRE with the same amount of CIPs. Dynamic Mechanical Analyzer (DMA) showed that the loss factor in the glass transition region of the DPNR-based MRE was higher than that of the IR-based MRE, indicating better damping properties. Further investigation was undertaken using a servo-hydraulic testing machine to characterise the effect of strain amplitude and frequency on the dynamic properties (e.g. damping coefficient) of MREs at zero magnetic fields. The results demonstrate that DPNR-based MREs possess a comparable damping coefficient to that of IR-based MREs. In addition, MR effect, which relates to the ratio between elastic modulus with applied magnetic field (on-state) to the same modulus without applied fields (off-state), was measured using a parallel plate rheometer. As a result, DPNR-based MREs have improved MR effect than that of IR-based MREs. Moreover, variable stiffness is obtained when the magnetic field was increased to 0.8T. Loss factor or tan δ of MREs was found to vary against different magnetic fields. Finally, MREs with varied stiffness and damping were found to have potential as active control devices for smart damping materials.

  3. Brain temporal complexity in explaining the therapeutic and cognitive effects of seizure therapy. (United States)

    Farzan, Faranak; Atluri, Sravya; Mei, Ye; Moreno, Sylvain; Levinson, Andrea J; Blumberger, Daniel M; Daskalakis, Zafiris J


    Over 350 million people worldwide suffer from depression, a third of whom are medication-resistant. Seizure therapy remains the most effective treatment in depression, even when many treatments fail. The utility of seizure therapy is limited due to its cognitive side effects and stigma. The biological targets of seizure therapy remain unknown, hindering design of new treatments with comparable efficacy. Seizures impact the brains temporal dynamicity observed through electroencephalography. This dynamicity reflects richness of information processing across distributed brain networks subserving affective and cognitive processes. We investigated the hypothesis that seizure therapy impacts mood (depressive symptoms) and cognition by modulating brain temporal dynamicity. We obtained resting-state electroencephalography from 34 patients (age = 46.0 ± 14.0, 21 females) receiving two types of seizure treatments-electroconvulsive therapy or magnetic seizure therapy. We used multi-scale entropy to quantify the complexity of the brain's temporal dynamics before and after seizure therapy. We discovered that reduction of complexity in fine timescales underlined successful therapeutic response to both seizure treatments. Greater reduction in complexity of fine timescales in parieto-occipital and central brain regions was significantly linked with greater improvement in depressive symptoms. Greater increase in complexity of coarse timescales was associated with greater decline in cognition including the autobiographical memory. These findings were region and timescale specific. That is, change in complexity in occipital regions (e.g. O2 electrode or right occipital pole) at fine timescales was only associated with change in depressive symptoms, and not change in cognition, and change in complexity in parieto-central regions (e.g. Pz electrode or intra and transparietal sulcus) at coarser timescale was only associated with change in cognition, and not depressive symptoms. Finally

  4. Effect of temporal lakes on avifaunal composition at the Southeast of Isthmus of Tehuantepec, Oaxaca, Mexico

    Directory of Open Access Journals (Sweden)

    Tamara Rioja-Paradela


    Full Text Available Oaxaca hosts one of the greatest biodiversity in México, occupying first place in avian diversity compared to other regions of the country. However, the area is undergoing serious problems such as high deforestation rates, soil erosion and over exploitation and extinction of species. These factors have all contributed to the current loss of biodiversity. Also, biological inventories are still incomplete. One of the least explored sites is the semiarid zone of Tehuantepec isthmus, around the locality of Santa Maria del Mar, Oaxaca, México. The area includes floodable grasslands, mangrove areas and dry forest, providing a range of potential habitats for different species. Our objective was to evaluate the effect of temporal lakes on spatial and temporal composition of the avifauna in Santa Maria del Mar, in order to generate information regarding this group within the region and the state, and to understand the importance of flood areas for resident and transitory birds. We conducted 12 avifauna surveys between July 2006 and June 2008, and established two transects of 2km length in each of four habitat types (beach, grassland, dry forest, and mangrove. We found a total of 75 species, corresponding to 16 orders and 30 families. Within an area of 26km², we significantly found 10.1% of the total number of bird species recorded for the entire state, and 6.6% of the total reported in Mexico. The families most represented were: Ardeidae, Laridae and Scolopacidae. Over the entire study period, dry forest was the most diverse habitat; followed by mangrove, grassland and the beach. Of all the species recorded, 38.6% were found at the edge or in the temporal lakes. We found a significant difference in species composition between seasons in the grassland, but no difference in the other habitats. Our results showed a significant effect of temporary lakes on avian diversity during the wet season; it also demonstrated the importance of grassland conservation

  5. Effect of temporal lakes on avifaunal composition at the Southeast of Isthmus of Tehuantepec, Oaxaca, Mexico. (United States)

    Rioja-Paradela, Tamara; Carrillo-Reyes, Arturo; Espinoza-Medinilla, Eduardo


    Oaxaca hosts one of the greatest biodiversity in México, occupying first place in avian diversity compared to other regions of the country. However, the area is undergoing serious problems such as high defor- estation rates, soil erosion and over exploitation and extinction of species. These factors have all contributed to the current loss of biodiversity. Also, biological inventories are still incomplete. One of the least explored sites is the semiarid zone of Tehuantepec isthmus, around the locality of Santa Maria del Mar, Oaxaca, México. The area includes floodable grasslands, mangrove areas and dry forest, providing a range of potential habitats for different species. Our objective was to evaluate the effect of temporal lakes on spatial and temporal composition of the avifauna in Santa Maria del Mar, in order to generate information regarding this group within the region and the state, and to understand the importance of flood areas for resident and transitory birds. We conducted 12 avifauna surveys between July 2006 and June 2008, and established two transects of 2km length in each of four habitat types (beach, grassland, dry forest, and mangrove). We found a total of 75 species, corresponding to 16 orders and 30 families. Within an area of 26 km2, we significantly found 10.1% of the total number of bird species recorded for the entire state, and 6.6% of the total reported in Mexico. The families most repre- sented were: Ardeidae, Laridae and Scolopacidae. Over the entire study period, dry forest was the most diverse habitat; followed by mangrove, grassland and the beach. Of all the species recorded, 38.6% were found at the edge or in the temporal lakes. We found a significant difference in species composition between seasons in the grassland, but no difference in the other habitats. Our results showed a significant effect of temporary lakes on avian diversity during the wet season; it also demonstrated the importance of grassland conservation given its

  6. Effects of emotional music on visual processes in inferior temporal area. (United States)

    Jomori, Izumi; Hoshiyama, Minoru; Uemura, Jun-ichi; Nakagawa, Yoshiro; Hoshino, Aiko; Iwamoto, Yuko


    To investigate the effects of emotional music on visual processes, we analyzed visual evoked magnetic fields (VEF) on listening to emotional music in 14 healthy subjects. Positive and negative pieces of music were delivered during VEF recording following stimulation by emotionally neutral pictures of faces and landscapes. VEF components at 100 (M100) and 150 (M170)ms after stimulus onset were analyzed, and the estimated current strength for M170 following face stimulation was enhanced with negative compared to positive music in the right hemisphere. The equivalent current dipole for M100 and M170 was estimated in the primary visual cortex (V1) and inferior temporal area (IT), respectively. The present results indicate that background music showed a top-down control of the visual processes in IT, which is a core site responsible for the interpretation of facial expression. The emotional contents of music could alter visual processes, especially those involving the face.

  7. Temporal inhibition: effects of changes in rate of reinforcement and rate of responding1 (United States)

    Carr, Edward G.; Reynolds, G. S.


    Pigeons were trained to key peck on several multiple schedules in which the first of two components was always a simple fixed-interval schedule. The rate of responding at the beginning of the constant fixed-interval schedule was found to decrease with increases in the rate of reinforcement associated with the other component of the multiple schedule, but remained unchanged with decreases in the rate of responding associated with the other component. These results were interpreted as being consistent with the view that the presence and magnitude of the temporal inhibitory effects observed in a given fixed-interval schedule are a function of the properties of reinforcing stimuli, rather than of changes in the rate of responding associated with the time interval immediately preceding the fixed interval in question. PMID:16811789

  8. Effects of tonotopicity, adaptation, modulation tuning, and temporal coherence in “primitive” auditory stream segregation

    DEFF Research Database (Denmark)

    Christiansen, Simon Krogholt; Jepsen, Morten Løve; Dau, Torsten


    The perceptual organization of two-tone sequences into auditory streams was investigated using a modeling framework consisting of an auditory pre-processing front end [Dau et al., J. Acoust. Soc. Am. 102, 2892–2905 (1997)] combined with a temporal coherence-analysis back end [Elhilali et al......., Neuron 61, 317–329 (2009)]. Two experimental paradigms were considered: (i) Stream segregation as a function of tone repetition time (TRT) and frequency separation (Df) and (ii) grouping of distant spectral components based on onset/offset synchrony. The simulated and experimental results of the present...... study supported the hypothesis that forward masking enhances the ability to perceptually segregate spectrally close tone sequences. Furthermore, the modeling suggested that effects of neural adaptation and processing though modulation-frequency selective filters may enhance the sensitivity to onset...

  9. The Anticonvulsant and Antioxidant Effects of Berberine in Kainate-induced Temporal Lobe Epilepsy in Rats

    Directory of Open Access Journals (Sweden)

    Tourandokht Baluchnejadmojarad


    Full Text Available Introduction: Temporal lobe epilepsy(TLE is a long lasting neurological disorder in which patients suffer from spontaneous seizures. New treatments with novel mechanisms of action are needed to help those patients whose seizures are resistant to available drugs. In this study, we investigated the possible neuroprotective effect of berberine in an intrahippocampal kainate model of TLE in rat. Methods: In the present study, the anticonvulsant and antioxidant effects of intraperitoneal administration of berberine(25, 50 and 100 mg/kg, was evaluated in intrahippocampal kainate(4g-induced TLE in rats. Results: The results showed that the kainate rats exhibit acute and spontaneous seizures in 24 hours and two weeks after intrahippocampal kainic acid injection. Administration of berberine, significantly decreased Racine score and rate of incidence of seizure in kainate rats(P<0.05. On the other hand, berberine ameliorated the lipid peroxidation(P<0.001 and nitrite(P<0.001 level, but had no effect on SOD activity. Discussion: These data suggest that berberine pretreatment could attenuate spontaneous recurrent seizures. Since, administration of berberine decreased lipid peroxidation in kainate rats, it seems that berberine,s favourable effect is due to its effectiveness in lessening of oxidative stress in rat. Key words: Kainic acid, Berberine, Seizure, Hippocampus, Oxidative stress, Rat

  10. Vibration and Damping Analysis of Composite Fiber Reinforced Wind Blade with Viscoelastic Damping Control

    Directory of Open Access Journals (Sweden)

    Tai-Hong Cheng


    Full Text Available Composite materials are increasingly used in wind blade because of their superior mechanical properties such as high strength-to-weight and stiffness-to-weight ratio. This paper presents vibration and damping analysis of fiberreinforced composite wind turbine blade with viscoelastic damping treatment. The finite element method based on full layerwise displacement theory was employed to analyze the damping, natural frequency, and modal loss factor of composite shell structure. The lamination angle was considered in mathematical modeling. The curved geometry, transverse shear, and normal strains were exactly considered in present layerwise shell model, which can depict the zig-zag in-plane and out-of-plane displacements. The frequency response functions of curved composite shell structure and wind blade were calculated. The results show that the damping ratio of viscoelastic layer is found to be very sensitive to determination of magnitude of composite structures. The frequency response functions with variety of thickness of damping layer were investigated. Moreover, the natural frequency, modal loss factor, and mode shapes of composite fiber reinforced wind blade with viscoelastic damping control were calculated.

  11. Active and passive damping based on piezoelectric elements -controllability issues-

    NARCIS (Netherlands)

    Holterman, J.; de Vries, Theodorus J.A.; van Amerongen, J.; Jonker, Jan B.; Jonker, J.B.


    Piezoelectric elements are widely used for damping micro-vibrations in mechanical structures. Active damping can be realised robustly by means of collocated actuator-sensor-pairs, controlled so as to extract vibration energy. Excellent damping performance is possible as long as sufficient

  12. Joint  effects of habitat configuration and temporal stochasticity on population dynamics (United States)

    Jennifer M. Fraterrigo; Scott M. Pearson; Monica G. Turner


    Habitat configuration and temporal stochasticity in the environment are recognized as important drivers of population structure, yet few studies have examined the combined influence of these factors....

  13. Cannabidiol exerts anti-convulsant effects in animal models of temporal lobe and partial seizures. (United States)

    Jones, Nicholas A; Glyn, Sarah E; Akiyama, Satoshi; Hill, Thomas D M; Hill, Andrew J; Weston, Samantha E; Burnett, Matthew D A; Yamasaki, Yuki; Stephens, Gary J; Whalley, Benjamin J; Williams, Claire M


    Cannabis sativa has been associated with contradictory effects upon seizure states despite its medicinal use by numerous people with epilepsy. We have recently shown that the phytocannabinoid cannabidiol (CBD) reduces seizure severity and lethality in the well-established in vivo model of pentylenetetrazole-induced generalised seizures, suggesting that earlier, small-scale clinical trials examining CBD effects in people with epilepsy warrant renewed attention. Here, we report the effects of pure CBD (1, 10 and 100mg/kg) in two other established rodent seizure models, the acute pilocarpine model of temporal lobe seizure and the penicillin model of partial seizure. Seizure activity was video recorded and scored offline using model-specific seizure severity scales. In the pilocarpine model CBD (all doses) significantly reduced the percentage of animals experiencing the most severe seizures. In the penicillin model, CBD (≥ 10 mg/kg) significantly decreased the percentage mortality as a result of seizures; CBD (all doses) also decreased the percentage of animals experiencing the most severe tonic-clonic seizures. These results extend the anti-convulsant profile of CBD; when combined with a reported absence of psychoactive effects, this evidence strongly supports CBD as a therapeutic candidate for a diverse range of human epilepsies. Copyright © 2012 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

  14. Temporal framing and consideration of future consequences: effects on smokers' and at-risk nonsmokers' responses to cigarette health warnings. (United States)

    Zhao, Xiaoquan; Nan, Xiaoli; Iles, Irina Alexandra; Yang, Bo


    This research examines the influence of temporal framing (long-term vs. short-term) and individual difference in consideration of future consequences (CFC) on the effectiveness of cigarette health warnings among smokers and at-risk nonsmokers in a college population. An online experiment (N = 395) revealed a three-way interaction among temporal framing, CFC, and smoking status. The results among at-risk nonsmokers supported the temporal fit hypothesis--those high in CFC responded more favorably to long-term framing, whereas those low in CFC responded more positively to short-term framing. The findings among smokers revealed a different pattern in which short-term framing was more effective among high-CFC smokers, whereas among low-CFC smokers the framing effect was not distinct. Theoretical and practical implications of the findings are discussed.

  15. Impact of temporal, spatial and cascaded effects on the pulse formation in ultra-broadband parametric amplifiers. (United States)

    Lang, T; Harth, A; Matyschok, J; Binhammer, T; Schultze, M; Morgner, U


    A 2 + 1 dimensional nonlinear pulse propagation model is presented, illustrating the weighting of different effects for the parametric amplification of ultra-broadband spectra in different regimes of energy scaling. Typical features in the distribution of intensity and phase of state-of-the-art OPA-systems can be understood by cascaded spatial and temporal effects.

  16. Effects of temporal distribution of specular and diffuse reflections on perceived music quality (United States)

    Smitthakorn, Pattra

    The purpose of this study was to investigate the effects of the temporal distribution of diffuse and specular reflections on the perceived acoustic qualities of music performance. Sets of impulse responses were designed with different temporal distributions of early acoustic energy (specular and diffuse reflections). Then, three types of anechoic sound sources---orchestral music, trumpet, and piano---were convolved with the designed impulse responses. The results from the listening tests revealed that different room environments were needed to acoustically support different source characteristics. The results show the following: (1) specular reflections arriving within 40 msec of the direct sound improved perceived "clarity" and "intimacy"; (2) specular reflections arriving between 40-80 msec after the direct sound improved perceived "clarity" for orchestral music; (3) specular reflections arriving later than 80 msec after the direct sound are not desirable; (4) large numbers of diffuse reflections arriving within 40 and 80 msec of the direct sound improved perceived "intimacy", "texture", and "overall impression" for all sound sources, heightened perceived "clarity" for trumpet and piano, and reduced perceived "glare" for trumpet; and (5) diffuse reflections arriving between 80-160 msec of the direct sound preserved perceived "reverberance" and reduced perceived "echoes" as opposed to specular reflections arriving in the same time period. The results of this study indicate that music performance halls should be designed to include diffuse reflections from surfaces within the 80 msec time period to achieve preferred texture, intimacy, clarity and overall impression and in the 160 msec time period to reduce echoes; specular reflections arriving within the 40 msec time period should be provided to enhance perceived clarity.

  17. The effects of postnatal phthalate exposure on the development of auditory temporal processing in rats. (United States)

    Kim, Bong Jik; Kim, Jungyoon; Keoboutdy, Vanhnansy; Kwon, Ho-Jang; Oh, Seung-Ha; Jung, Jae Yun; Park, Il Yong; Paik, Ki Chung


    The central auditory pathway is known to continue its development during the postnatal critical periods and is shaped by experience and sensory inputs. Phthalate, a known neurotoxic material, has been reported to be associated with attention deficits in children, impacting many infant neurobehaviors. The objective of this study was to investigate the potential effects of neonatal phthalate exposure on the development of auditory temporal processing. Neonatal Sprague-Dawley rats were randomly assigned into two groups: The phthalate group (n = 6), and the control group (n = 6). Phthalate was given once per day from postnatal day 8 (P8) to P28. Upon completion, at P28, the Auditory Brainstem Response (ABR) and Gap Prepulse Inhibition of Acoustic Startle response (GPIAS) at each gap duration (2, 5, 10, 20, 50 and 80 ms) were measured, and gap detection threshold (GDT) was calculated. These outcomes were compared between the two groups. Hearing thresholds by ABR showed no significant differences at all frequencies between the two groups. Regarding GPIAS, no significant difference was observed, except at a gap duration of 20 ms (p = 0.037). The mean GDT of the phthalate group (44.0 ms) was higher than that of the control group (20.0 ms), but without statistical significance (p = 0.065). Moreover, the phthalate group tended to demonstrate more of a scattered distribution in the GDT group than the in the control group. Neonatal phthalate exposure may disrupt the development of auditory temporal processing in rats. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Effects of temporally biased watering on the nitrogen response of Chenopodium album (United States)

    Kinugasa, Toshihiko; Hozumi, Yumi


    Plant growth responses to an increasing N deposition are stimulated by an increase in annual precipitation, but such a stimulation has not always been found. We hypothesized that the effect of precipitation on plant N responses can change with temporally biased precipitation: a plant N response will be suppressed when precipitation is lower in the late growing period because larger plants are more susceptible to water limitations. We grew Chenopodium album under a high and low N application level with three watering patterns while maintaining the total supplied watering amount during the experimental period: constant watering, low watering in the first period and high watering in the latter period, and high watering in the first period and low watering in the latter period. The watering pattern did not affect plant dry mass under low N conditions. The plant dry mass under high N conditions was reduced by low watering in the first period, but the reduction was fully compensated in the subsequent high watering period by the stimulation of photosynthesis. Low watering following high watering under high N conditions did not suppress plant growth, but partial leaf wilting was observed at the end of the experimental period. Finally, at the end of the experiment, the response of plant dry mass to N was not different among the watering patterns. We concluded that a plant's response to increasing N deposition could be affected by temporally biased precipitation, depending on the scale of the precipitation bias and the ability of the plant to compensate or mitigate growth inhibition due to a water deficit. Precipitation deficits later in the growing period may be more detrimental to plant growth and can reduce plant responses to an increasing N deposition.

  19. Meta-analysis of time perception and temporal processing in schizophrenia: Differential effects on precision and accuracy. (United States)

    Thoenes, Sven; Oberfeld, Daniel


    Numerous studies have reported that time perception and temporal processing are impaired in schizophrenia. In a meta-analytical review, we differentiate between time perception (judgments of time intervals) and basic temporal processing (e.g., judgments of temporal order) as well as between effects on accuracy (deviation of estimates from the veridical value) and precision (variability of judgments). In a meta-regression approach, we also included the specific tasks and the different time interval ranges as covariates. We considered 68 publications of the past 65years, and meta-analyzed data from 957 patients with schizophrenia and 1060 healthy control participants. Independent of tasks and interval durations, our results demonstrate that time perception and basic temporal processing are less precise (more variable) in patients (Hedges' g>1.00), whereas effects of schizophrenia on accuracy of time perception are rather small and task-dependent. Our review also shows that several aspects, e.g., potential influences of medication, have not yet been investigated in sufficient detail. In conclusion, the results are in accordance with theoretical assumptions and the notion of a more variable internal clock in patients with schizophrenia, but not with a strong effect of schizophrenia on clock speed. The impairment of temporal precision, however, may also be clock-unspecific as part of a general cognitive deficiency in schizophrenia. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Primacy effects induced by temporal or physical context shifts are attenuated by a preshift test trial (United States)

    Wheeler, Daniel S.; Miller, Ralph R.


    When subjects are sequentially trained with a cue (A) paired separately with two outcomes (B and C) in different phases (i.e., A–B pairings followed by A–C pairings) testing in the training context after short retention intervals often reveals recency effects (i.e., stronger influence by A–C). In contrast, testing after long retention intervals or testing in a context different from that of training sometimes reveals primacy effects (A–B). Three experiments were conducted using rats in a Pavlovian conditioned bar-press suppression preparation to ascertain whether a nonreinforced test trial in the training context soon after training can attenuate this shift to primacy. Experiment 1 demonstrated that exposure to A shortly after both phases of training, but prior to a long retention interval, can attenuate shifts from recency to primacy otherwise observed with a long retention interval. Experiment 2 showed that exposure to A in the training context can also eliminate the shift from recency to primacy otherwise produced by shifting the physical context between training and test. Experiment 3 discredited a potential account of the results of Experiments 1 and 2. The effects observed in Experiment 1 and 2 are interpreted as early testing in the training context serving to initiate rehearsal of the A–C association due to the temporal proximity of A–C training. PMID:17389907

  1. How music alters a kiss: superior temporal gyrus controls fusiform–amygdalar effective connectivity (United States)

    Deserno, Lorenz; Bakels, Jan-Hendrik; Schlochtermeier, Lorna H.; Kappelhoff, Hermann; Jacobs, Arthur M.; Fritz, Thomas Hans; Koelsch, Stefan; Kuchinke, Lars


    While watching movies, the brain integrates the visual information and the musical soundtrack into a coherent percept. Multisensory integration can lead to emotion elicitation on which soundtrack valences may have a modulatory impact. Here, dynamic kissing scenes from romantic comedies were presented to 22 participants (13 females) during functional magnetic resonance imaging scanning. The kissing scenes were either accompanied by happy music, sad music or no music. Evidence from cross-modal studies motivated a predefined three-region network for multisensory integration of emotion, consisting of fusiform gyrus (FG), amygdala (AMY) and anterior superior temporal gyrus (aSTG). The interactions in this network were investigated using dynamic causal models of effective connectivity. This revealed bilinear modulations by happy and sad music with suppression effects on the connectivity from FG and AMY to aSTG. Non-linear dynamic causal modeling showed a suppressive gating effect of aSTG on fusiform–amygdalar connectivity. In conclusion, fusiform to amygdala coupling strength is modulated via feedback through aSTG as region for multisensory integration of emotional material. This mechanism was emotion-specific and more pronounced for sad music. Therefore, soundtrack valences may modulate emotion elicitation in movies by differentially changing preprocessed visual information to the amygdala. PMID:24298171

  2. The effect of natural scenes on temporal and probability discounting

    Directory of Open Access Journals (Sweden)


    Results: There was no significant difference in delay discounting between groups F(1,172 = .613, p = .607. Males discounted significantly less than females on temporal and probability discounting tasks F(1,300 = 6.795, p = .010; F(1,300 = 9.941, p = .002, respectively. Older individuals delay discount significantly less than younger individuals F(3,300 = 11.826, p < .001. Older individuals had significantly higher positive affect than younger individuals F(3,300 = 7.956, p < .001. Conclusions: The discounting functions obtained were consistent with previous studies. The results for age and gender on discounting contributes to discussion of these matters: While lower levels of impulsivity in older adults is perhaps to be expected, the gender effect obtained here is less easily explained. Contrary to Berry et al. (2014 we found no evidence for any effect of viewing natural scenes on discounting, regardless of their aesthetic properties. While this discrepancy could relate to the differences in methodology employed, it would suggest that the claims for an effect of natural scenes on impulsivity should be treated with caution.

  3. How music alters a kiss: superior temporal gyrus controls fusiform-amygdalar effective connectivity. (United States)

    Pehrs, Corinna; Deserno, Lorenz; Bakels, Jan-Hendrik; Schlochtermeier, Lorna H; Kappelhoff, Hermann; Jacobs, Arthur M; Fritz, Thomas Hans; Koelsch, Stefan; Kuchinke, Lars


    While watching movies, the brain integrates the visual information and the musical soundtrack into a coherent percept. Multisensory integration can lead to emotion elicitation on which soundtrack valences may have a modulatory impact. Here, dynamic kissing scenes from romantic comedies were presented to 22 participants (13 females) during functional magnetic resonance imaging scanning. The kissing scenes were either accompanied by happy music, sad music or no music. Evidence from cross-modal studies motivated a predefined three-region network for multisensory integration of emotion, consisting of fusiform gyrus (FG), amygdala (AMY) and anterior superior temporal gyrus (aSTG). The interactions in this network were investigated using dynamic causal models of effective connectivity. This revealed bilinear modulations by happy and sad music with suppression effects on the connectivity from FG and AMY to aSTG. Non-linear dynamic causal modeling showed a suppressive gating effect of aSTG on fusiform-amygdalar connectivity. In conclusion, fusiform to amygdala coupling strength is modulated via feedback through aSTG as region for multisensory integration of emotional material. This mechanism was emotion-specific and more pronounced for sad music. Therefore, soundtrack valences may modulate emotion elicitation in movies by differentially changing preprocessed visual information to the amygdala. © The Author (2013). Published by Oxford University Press. For Permissions, please email:

  4. Rudder-Roll Damping Controller Design using Mu Synthesis

    DEFF Research Database (Denmark)

    Yang, C.; Blanke, M.


    The effectiveness of rudder roll damping control is very sensitive to uncertainty in ship dynamic parameters. In this paper, an H-infinity controller is designed using mu synthesis and an uncertainty model for roll and yaw that was identified earlier from experiments at sea. The properties...... of the resulting controller are discussed and seaway simulations with linear and non-linear models of a container ship illustrate the controller performance. The simulation results show that the mu synthesis controller is able to obtain robust performance over an envelope of operational conditions....

  5. Rudder-Roll Damping Controller Design using Mu Synthesis

    DEFF Research Database (Denmark)

    Yang, C.; Blanke, M.


    The effectiveness of rudder roll damping control is very sensitive to uncertainty in ship dynamic parameters. In this paper, an H-infinity controller is designed using mu synthesis and an uncertainty model for roll and yaw that was identified earlier from experiments at sea. The properties...... of the resulting controller are discussed and seaway simulations with linear and non-linear models of a container ship illustrate the controller performance. The simulation results show that the mu synthesis controller is able to obtain robust performance over an envelope of operational conditions...

  6. Team self-regulation and meeting deadlines in project teams: antecedents and effects of temporal consensus

    NARCIS (Netherlands)

    Gevers, J.M.P.; van Eerde, W.; Rutte, C.G.


    In a longitudinal study among 48 project teams, we investigated how temporal consensus (i.e., the extent to which team members have a shared understanding of the temporal aspects of their collective task) affects the ability of teams to establish coordinated action and meet deadlines. In addition,

  7. The effects of Kanizsa contours on temporal integration and attention in rapid serial visual presentation

    NARCIS (Netherlands)

    Karabay, Aytac; Akyürek, Elkan G.

    Performance in rapid serial visual presentation tasks has been shown to depend on the temporal integration of target stimuli when they are presented in direct succession. Temporal target integration produces a single, combined representation of visually compatible stimuli, which is comparatively

  8. Assessing the effects of temporal coherence on auditory stream formation through comodulation masking release

    DEFF Research Database (Denmark)

    Christiansen, Simon Krogholt; Oxenham, Andrew J.


    , based on comodulation masking release (CMR), to assess the conditions under which a loss of temporal coherence across frequency can lead to auditory stream segregation. The measure relies on the assumption that the CMR, produced by flanking bands remote from the masker and target frequency, only occurs...... if the masking and flanking bands form part of the same perceptual stream. The masking and flanking bands consisted of sequences of narrowband noise bursts, and the temporal coherence between the masking and flanking bursts was manipulated in two ways: (a) By introducing a fixed temporal offset between...... the flanking and masking bands that varied from zero to 60 ms and (b) by presenting the flanking and masking bursts at different temporal rates, so that the asynchronies varied from burst to burst. The results showed reduced CMR in all conditions where the flanking and masking bands were temporally incoherent...

  9. Does Controlling for Temporal Parameters Change the Levels-of-Processing Effect in Working Memory? (United States)

    Loaiza, Vanessa M; Camos, Valérie


    The distinguishability between working memory (WM) and long-term memory has been a frequent and long-lasting source of debate in the literature. One recent method of identifying the relationship between the two systems has been to consider the influence of long-term memory effects, such as the levels-of-processing (LoP) effect, in WM. However, the few studies that have examined the LoP effect in WM have shown divergent results. This study examined the LoP effect in WM by considering a theoretically meaningful methodological aspect of the LoP span task. Specifically, we fixed the presentation duration of the processing component a priori because such fixed complex span tasks have shown differences when compared to unfixed tasks in terms of recall from WM as well as the latent structure of WM. After establishing a fixed presentation rate from a pilot study, the LoP span task presented memoranda in red or blue font that were immediately followed by two processing words that matched the memoranda in terms of font color or semantic relatedness. On presentation of the processing words, participants made deep or shallow processing decisions for each of the memoranda before a cue to recall them from WM. Participants also completed delayed recall of the memoranda. Results indicated that LoP affected delayed recall, but not immediate recall from WM. These results suggest that fixing temporal parameters of the LoP span task does not moderate the null LoP effect in WM, and further indicate that WM and long-term episodic memory are dissociable on the basis of LoP effects.

  10. Research on low strain magnetic mechanical hysteresis damping performance of Fe-15Cr-3Mo-0.5Si alloy

    International Nuclear Information System (INIS)

    Wang, Hui; Huang, Huawei; Hong, Xiaofeng; Yin, Changgeng; Huang, Zhaohua; Chen, Le


    Highlights: • Heat treatment system has a great effect on the alloy damping performance. • Damping performance does not improve monotonously with temperature. • Furnace cooling is higher than that of alloy after air cooling. • There is an optimum annealing temperature and grain size to obtain high damping. - Abstract: This paper studies the preparation of Fe-15Cr-3Mo-0.5Si alloy by using vacuum induction melting furnace and vacuum annealing furnace, the damping performance of which in different heat treatment states is tested with dynamic mechanical thermal analyzer (DMA). Through microstructure observation with metallographic microscope (OM), grain boundary observation with scanning electron microscopy (SEM), phase structure analysis with X-ray diffraction (XRD) and internal stress of S-B model analysis, the effect law of annealing temperature, types of cooling, holding time and grain sizes on the damping performance of alloy and the related mechanism can be concluded as follows. The annealing temperature and grain sizes have a significant impact on the damping strain amplitude as well as the magnetic and mechanical damping performance of this ferromagnetic alloy. Proper annealing temperature and grain size is the necessary condition to get high damping performance of the alloy. It is not conducive to improvement of the damping performance if the annealing temperature is too high or too low and the grain size is too small or too large. For Fe-15Cr-3Mo-0.5Si alloy, within the range of the low strain amplitude, alloy damping performance does not improve monotonously with the increase of the annealing temperature and grain size. The maximum value appears at the annealing temperature of 1100 °C/1 h with the grain size of about 300 μm. At high annealing temperature of 1100 °C, the damping performance of alloy in the slow cooling furnace is higher than that with air cooling treatment. The extension or shortening of the holding time, to a certain extent

  11. Evolution of damping in ferromagnetic/nonmagnetic thin film bilayers as a function of nonmagnetic layer thickness (United States)

    Azzawi, S.; Ganguly, A.; Tokaç, M.; Rowan-Robinson, R. M.; Sinha, J.; Hindmarch, A. T.; Barman, A.; Atkinson, D.


    The evolution of damping in Co/Pt, Co/Au, and Ni81Fe19 /Pt bilayers was studied with increasing nonmagnetic (NM) heavy-metal layer thicknesses in the range 0.2 nm ≤tNM≤10 nm , where tNM is the NM layer thickness. Magnetization precession was measured in the time domain using time-resolved magneto-optical Kerr effect magnetometry. Fitting of the data with a damped sinusoidal function was undertaken in order to extract the phenomenological Gilbert damping coefficient α . For Pt-capped Co and Ni81Fe19 layers a large and complex dependence of α on the Pt layer thickness was observed, while for Au capping no significant dependence was observed. It is suggested that this difference is related to the different localized spin-orbit interaction related to intermixing and to d -d hybridization of Pt and Au at the interface with Co or Ni81Fe19 . Also it was shown that damping is affected by the crystal structure differences in FM thin films and at the interface, which can modify the spin-diffusion length and the effective spin-mixing conductance. In addition to the intrinsic damping an extrinsic contribution plays an important role in the enhancement of damping when the Pt capping layer is discontinuous. The dependence of damping on the nonmagnetic layer thickness is complex but shows qualitative agreement with recent theoretical predictions.

  12. Barotropic FRW cosmologies with Chiellini damping

    International Nuclear Information System (INIS)

    Rosu, Haret C.; Mancas, Stefan C.; Chen, Pisin


    It is known that barotropic FRW equations written in the conformal time variable can be reduced to simple linear equations for an exponential function involving the conformal Hubble rate. Here, we show that an interesting class of barotropic universes can be obtained in the linear limit of a special type of nonlinear dissipative Ermakov–Pinney equations with the nonlinear dissipation built from Chiellini's integrability condition. These cosmologies, which evolutionary are similar to the standard ones, correspond to barotropic fluids with adiabatic indices rescaled by a particular factor and have amplitudes of the scale factors inverse proportional to the adiabatic index. - Highlights: • Chiellini-damped Ermakov–Pinney equations are used in barotropic FRW cosmological context. • Chiellini-damped scale factors of the barotropic FRW universes are introduced. • These scale factors are similar to the undamped ones

  13. Damping Estimation by Frequency Domain Decomposition

    DEFF Research Database (Denmark)

    Brincker, Rune; Ventura, C. E.; Andersen, P.


    In this paper it is explained how the damping can be estimated using the Frequency Domain Decomposition technique for output-only modal identification, i.e. in the case where the modal parameters is to be estimated without knowing the forces exciting the system. Also it is explained how the natural...... back to time domain to identify damping and frequency. The technique is illustrated on a simple simulation case with 2 closely spaced modes. On this example it is illustrated how the identification is influenced by very closely spacing, by non-orthogonal modes, and by correlated input. The technique...... frequencies can be accurately estimated without being limited by the frequency resolution of the discrete Fourier transform. It is explained how the spectral density matrix is decomposed into a set of single degree of freedom systems, and how the individual SDOF auto spectral density functions are transformed...

  14. Barotropic FRW cosmologies with Chiellini damping

    Energy Technology Data Exchange (ETDEWEB)

    Rosu, Haret C., E-mail: [IPICyT, Instituto Potosino de Investigacion Cientifica y Tecnologica, Camino a la presa San José 2055, Col. Lomas 4a Sección, 78216 San Luis Potosí, SLP (Mexico); Mancas, Stefan C., E-mail: [Department of Mathematics, Embry–Riddle Aeronautical University, Daytona Beach, FL 32114-3900 (United States); Chen, Pisin, E-mail: [Leung Center for Cosmology and Particle Astrophysics (LeCosPA) and Department of Physics, National Taiwan University, Taipei 10617, Taiwan (China)


    It is known that barotropic FRW equations written in the conformal time variable can be reduced to simple linear equations for an exponential function involving the conformal Hubble rate. Here, we show that an interesting class of barotropic universes can be obtained in the linear limit of a special type of nonlinear dissipative Ermakov–Pinney equations with the nonlinear dissipation built from Chiellini's integrability condition. These cosmologies, which evolutionary are similar to the standard ones, correspond to barotropic fluids with adiabatic indices rescaled by a particular factor and have amplitudes of the scale factors inverse proportional to the adiabatic index. - Highlights: • Chiellini-damped Ermakov–Pinney equations are used in barotropic FRW cosmological context. • Chiellini-damped scale factors of the barotropic FRW universes are introduced. • These scale factors are similar to the undamped ones.

  15. Interfacial friction damping properties in magnetorheological elastomers

    International Nuclear Information System (INIS)

    Fan, Yanceng; Gong, Xinglong; Xuan, Shouhu; Zhang, Wei; Zheng, Jian; Jiang, Wanquan


    In this study, the interfacial friction damping properties of magnetorheological elastomers (MREs) were investigated experimentally. Two kinds of carbonyl iron particles, with sizes of 1.1 µm and 9.0 µm, were used to fabricate four MRE samples, whose particle weight fractions were 10%, 30%, 60% and 80%, respectively. Their microstructures were observed using an environmental scanning electron microscope (SEM). The dynamic performances of these samples, including shear storage modulus and loss factor were measured with a modified dynamic mechanical analyzer (DMA). The experimental results indicate that MRE samples fabricated with 1.1 µm carbonyl iron particles have obvious particle agglomeration, which results in the fluctuation of loss factor compared with other MRE samples fabricated with large particle sizes. The analysis implies that the interfacial friction damping mainly comes from the frictional sliding at the interfaces between the free rubber and the particles

  16. Rapidly moving contact lines and damping contributions (United States)

    Xia, Yi; Daniel, Susan; Steen, Paul


    Contact angle varies dynamically with contact line (CL) speed when a liquid moves across a solid support, as when a liquid spreads rapidly. For sufficiently rapid spreading, inertia competes with capillarity to influence the interface shape near the support. We use resonant-mode plane-normal support oscillations of droplets to drive lateral contact-line motion. Reynolds numbers based on CL speeds are high and capillary numbers are low. These are inertial-capillary motions. By scanning the driving frequency, we locate the frequency at peak amplification (resonance), obtain the scaled peak height (amplification factor) and a measure of band-width (damping ratio). We report how a parameter for CL mobility depends on these scanning metrics, with the goal of distinguishing contributions from the bulk- and CL-dissipation to overall damping.

  17. Fractal Theory and Contact Dynamics Modeling Vibration Characteristics of Damping Blade

    Directory of Open Access Journals (Sweden)

    Ruishan Yuan


    Full Text Available The contact surface structure of dry friction damper is complicate, irregular, and self-similar. In this paper, contact surface structure is described with the fractal theory and damping blade is simplified as 2-DOF cantilever beam model with lumped masses. By changing the position of the damper, lacing and shroud structure are separately simulated to study vibration absorption effect of damping blade. The results show that both shroud structure and lacing could not only dissipate energy but also change stiffness of blade. Under the same condition of normal pressure and contact surface, the damping effect of lacing is stronger than that of shroud structure. Meanwhile, the effect on changing blade stiffness of shroud structure is stronger than that of lacing. This paper proposed that there is at least one position of the blade, at which the damper dissipates the most vibration energy during a vibration cycle.

  18. Single bunch beam breakup in linacs and BNS damping

    International Nuclear Information System (INIS)

    Toyomasu, Takanori


    We study a single-bunch beam breakup (BBU) problem by a macro-particle model. We consider both the BBU solution and the Landau damping solution which includes the Balakin-Novokhatsky-Smirnov (BNS) damping. In the BBU solution, we get an analytic solution which includes both the Chao-Richter-Yao solution and the two-particle model solution and which agrees well with simulation. The solution can also be used in a multi-bunch case. In the Landau damping solution, we can be see the mechanism of Landau damping formally and can get some insights into BNS damping. We confirm that a two-particle model criterion for BNS damping is a good one. We expect that the two-particle model criterion is represented by the first order interaction in Landau damping solution of a macro-particle model. (author)

  19. Comparing Sources of Damping of Cross-Wind Motion

    DEFF Research Database (Denmark)

    Tarp-Johansen, Niels Jacob; Andersen, Lars; Christensen, Erik Damgaard


    practise plays a key role in this. The questions are: does more damping exist and is one of the sources of damping the main contributor allowing for site-independent guidelines. The aim of this paper is to address these issues. It is demonstrated that tower dampers are important in order to tackle...... importance of the sources of damping clearly depends on the damping forces caused, but equally important is the displacements at the point of attack of the forces which is decisive for the amount of mechanical work performed, i.e. damping acting at the tower base has less potential than damping acting...... driving if there is a significant wind-wave misalignment. In order to avoid unnecessary conservatism it is therefore important to know if there is more damping available than assumed in the today's practise. The paper treats this issue. Contents Based on engineering judgement it is expected...

  20. A review of damping of two-phase flows

    International Nuclear Information System (INIS)

    Hara, Fumio


    Damping of two-phase flows has been recognized as one of the most unknown parameters in analyzing vibrational characteristics of structures subjected to two-phase flows since it seems to be influenced by many physical parameters involved in the physics of dynamic energy dissipation of a vibrating structure, for example, liquid viscosity, surface tension, flow velocity, mass ratio, frequency, void fraction, flow regime and so forth. This paper deals with a review of scientific works done to date on the damping of two phase flows and discussions about what has been clarified and what has not been known to us, or what kinds of research are needed about two-phase flow damping. The emphasis is put on the definition of two-phase fluid damping, damping measurement techniques, damping characteristics in relation to two phase flow configurations, and damping generation mechanisms

  1. Gyroscopic stabilization and indefimite damped systems

    DEFF Research Database (Denmark)

    Pommer, Christian

    a class of feasibel skew-Hermitian matrices A depending on the choise of M. The theory can be applied to dynamical systems of the form x''(t) + ( dD + g G) x'(t) + K x(t) = 0 where G is a skew symmetric gyrocopic matrix, D is a symmetric indefinite damping matrix and K > 0 is a positive definite stiffness...

  2. Proceedings of Damping Volume 1 of 3 (United States)


    provided by the payload contractor. Prior to considerations of various interface stiffness and damping values, the NASTRAN DMAP set-up for the proposed...coworkers in the Dynamic Loads Group. He particularly appreciates Mr. L. J. Van Hofwegen for the set-up of NASTRAN DMAP . This work could not have...from NASTRAN finite element program. If the input torquer disturbance source were activated at maximum output, finite element analysis showed that the

  3. Transmission problem for waves with frictional damping

    Directory of Open Access Journals (Sweden)

    Waldemar D. Bastos


    Full Text Available In this paper we consider the transmission problem, in one space dimension, for linear dissipative waves with frictional damping. We study the wave propagation in a medium with a component with attrition and another simply elastic. We show that for this type of material, the dissipation produced by the frictional part is strong enough to produce exponential decay of the solution, no matter how small is its size.

  4. Parameter Scan for the CLIC Damping Rings

    CERN Document Server

    Papaphilippou, Y; Korostelev, M


    Triggered by the RF frequency reduction of the CLIC main linac cavities, the damping ring parameters had to be reevaluated and the rings performance adapted to the new luminosity requirements. In view of a staged approach for reaching the ultimate energy of the collider, the dependence of the rings output emittances under the influence of Intrabeam Scattering is evaluated with respect to different beam characteristics such as bunch population, beam energy, coupling and longitudinal beam characteristics.

  5. Seismic damage diagnosis of a masonry building using short-term damping measurements (United States)

    Kouris, Leonidas Alexandros S.; Penna, Andrea; Magenes, Guido


    It is of considerable importance to perform dynamic identification and detect damage in existing structures. This paper describes a new and practical method for damage diagnosis of masonry buildings requiring minimum computational effort. The method is based on the relative variation of modal damping and validated against experimental data from a full scale two storey shake table test. The experiment involves a building subjected to uniaxial vibrations of progressively increasing intensity at the facilities of EUCENTRE laboratory (Pavia, Italy) up to a near collapse damage state. Five time-histories are applied scaling the Montenegro (1979) accelerogram. These strong motion tests are preceded by random vibration tests (RVT's) which are used to perform modal analysis. Two deterministic methods are applied: the single degree of freedom (SDOF) assumption together with the peak-picking method in the discrete frequency domain and the Eigen realisation algorithm with data correlations (ERA-DC) in the discrete time domain. Regarding the former procedure, some improvements are incorporated to locate rigorously the natural frequencies and estimate the modal damping. The progressive evolution of the modal damping is used as a key indicator to characterise damage on the building. Modal damping is connected to the structural mass and stiffness. A square integrated but only with two components expression for proportional (classical) damping is proposed to fit better with the experimental measurements of modal damping ratios. Using this Rayleigh order formulation the contribution of each of the damping components is evaluated. The stiffness component coefficient is proposed as an effective index to detect damage and quantify its intensity.

  6. An efficient delivery of DAMPs on the cell surface by the unconventional secretion pathway

    International Nuclear Information System (INIS)

    Zhu, Haiyan; Wang, Lan; Ruan, Yuanyuan; Zhou, Lei; Zhang, Dongmei; Min, Zhihui; Xie, Jianhui; Yu, Min; Gu, Jianxin


    Research highlights: → Hsp60 transported to cell surface through the classical secretory pathway was modified with N-glycosylation. → HSAPB-N18 could efficiently deliver Hsp60 to the cell surface via the unconventional secretory pathway. → Cell surface Hsp60 delivered by HASPB-N18 has a proper conformation. → HASPB-N18 is an efficient delivery signal for other DAMP molecules such as Hsp70 and HMGB1. -- Abstract: Damage-associated molecular patterns (DAMPs) are signals released from dying cells evoking the immune system response in several inflammatory disorders. In normal situations, many of DAMPs are nuclear or cytosolic proteins with defined intracellular function, but they could be found on the cell surface following tissue injury. The biological function of the translocated DAMPs is still not well known and an efficient delivery of these molecules on the cell surface is required to clarify their biological effects. In this study, we demonstrated that an unclassical secretory signal peptide, N-terminal 18 amino acids of HASPB (HASPB-N18), could efficiently deliver Hsp60, Hsp70, and HMGB1 on the cell surface. Furthermore, the delivery of these molecules on the cell surface by HASPB-N18 is not limited to a special cell line because several cell lines could use this delivery signal to deliver these molecules on the cell surface. Moreover, we demonstrated that Hsp60 on the cell surface delivered by HASPB-N18 could be recognized by a soluble form of LOX-1, which implies that DAMPs on the cell surface delivered by HASPB-N18 have a proper conformation during transport. Therefore, delivery of DAMPs by HASPB-N18 is a reliable model to further understand the biological significance of DAMPs on the cell surface.

  7. Mapping of elasticity and damping in an α + β titanium alloy through atomic force acoustic microscopy

    Directory of Open Access Journals (Sweden)

    M. Kalyan Phani


    Full Text Available The distribution of elastic stiffness and damping of individual phases in an α + β titanium alloy (Ti-6Al-4V measured by using atomic force acoustic microscopy (AFAM is reported in the present study. The real and imaginary parts of the contact stiffness k* are obtained from the contact-resonance spectra and by using these two quantities, the maps of local elastic stiffness and the damping factor are derived. The evaluation of the data is based on the mass distribution of the cantilever with damped flexural modes. The cantilever dynamics model considering damping, which was proposed recently, has been used for mapping of indentation modulus and damping of different phases in a metallic structural material. The study indicated that in a Ti-6Al-4V alloy the metastable β phase has the minimum modulus and the maximum damping followed by α′- and α-phases. Volume fractions of the individual phases were determined by using a commercial material property evaluation software and were validated by using X-ray diffraction (XRD and electron back-scatter diffraction (EBSD studies on one of the heat-treated samples. The volume fractions of the phases and the modulus measured through AFAM are used to derive average modulus of the bulk sample which is correlated with the bulk elastic properties obtained by ultrasonic velocity measurements. The average modulus of the specimens estimated by AFAM technique is found to be within 5% of that obtained by ultrasonic velocity measurements. The effect of heat treatments on the ultrasonic attenuation in the bulk sample could also be understood based on the damping measurements on individual phases using AFAM.

  8. Temporal Effects of Acute Walking Exercise on Learning and Memory Function. (United States)

    Sng, Eveleen; Frith, Emily; Loprinzi, Paul D


    To evaluate the temporal effects of acute exercise on episodic memory. A quasi-experimental study. Eighty-eight college students (N = 22 per group). Four experimental groups were evaluated, including a control group, exercising prior to memory encoding, exercising during encoding, and exercising during memory consolidation. The exercise stimulus consisted of a 15-minute moderate-intensity walk on a treadmill. Participants completed the Rey Auditory Verbal Learning Test (RAVLT) to assess learning and memory. Prospective memory was assessed via a Red Pen Task. Long-term memory (recognition and attribution) of the RAVLT was assessed 20 minutes and 24 hours after exercise. Repeated-measures analysis of variance (ANOVA) assessed the performance of RAVLT scores of trials 1 to 5 across groups. One-way ANOVA assessed the performance of individual trials across groups, whereas χ 2 assessed the performance of the Red Pen Task across groups. Regarding learning, the interaction of groups × trial was marginally statistically significant ( F 12,332 = 1.773, P = .05), indicating that the group which exercised before encoding did better than the group that exercised during encoding and consolidation. For both 24-hour recognition and attribution performance, the group that exercised before memory encoding performed significantly better than the group that exercised during consolidation ( P = .05 recognition, P = .006 attribution). Engaging in a 15-minute bout of moderate-intensity walking before a learning task was effective in influencing long-term episodic memory.

  9. Effects of Temporal Congruity Between Auditory and Visual Stimuli Using Rapid Audio-Visual Serial Presentation. (United States)

    An, Xingwei; Tang, Jiabei; Liu, Shuang; He, Feng; Qi, Hongzhi; Wan, Baikun; Ming, Dong


    Combining visual and auditory stimuli in event-related potential (ERP)-based spellers gained more attention in recent years. Few of these studies notice the difference of ERP components and system efficiency caused by the shifting of visual and auditory onset. Here, we aim to study the effect of temporal congruity of auditory and visual stimuli onset on bimodal brain-computer interface (BCI) speller. We designed five visual and auditory combined paradigms with different visual-to-auditory delays (-33 to +100 ms). Eleven participants attended in this study. ERPs were acquired and aligned according to visual and auditory stimuli onset, respectively. ERPs of Fz, Cz, and PO7 channels were studied through the statistical analysis of different conditions both from visual-aligned ERPs and audio-aligned ERPs. Based on the visual-aligned ERPs, classification accuracy was also analyzed to seek the effects of visual-to-auditory delays. The latencies of ERP components depended mainly on the visual stimuli onset. Auditory stimuli onsets influenced mainly on early component accuracies, whereas visual stimuli onset determined later component accuracies. The latter, however, played a dominate role in overall classification. This study is important for further studies to achieve better explanations and ultimately determine the way to optimize the bimodal BCI application.

  10. An integrated damping and strengthening strategy for performance-based seismic design and retrofit for highway bridges. (United States)


    In this study, a damping-enhanced strengthening (DES) strategy was introduced to retrofit bridge structures for multiple : performance objectives. The main objectives of this study are (1) to numerically demonstrate the effectiveness of the anchoring...

  11. Landau damping in trapped Bose condensed gases

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, B; Zaremba, E [Department of Physics, Queen' s University, Kingston, ON K7L 3N6 (Canada)


    We study Landau damping in dilute Bose-Einstein condensed gases in both spherical and prolate ellipsoidal harmonic traps. We solve the Bogoliubov equations for the mode spectrum in both of these cases, and calculate the damping by summing over transitions between excited quasiparticle states. The results for the spherical case are compared to those obtained in the Hartree-Fock (HF) approximation, where the excitations take on a single-particle character, and excellent agreement between the two approaches is found. We have also taken the semiclassical limit of the HF approximation and obtain a novel expression for the Landau damping rate involving the time-dependent self-diffusion function of the thermal cloud. As a final approach, we study the decay of a condensate mode by making use of dynamical simulations in which both the condensate and thermal cloud are evolved explicitly as a function of time. A detailed comparison of all these methods over a wide range of sample sizes and trap geometries is presented.

  12. First Results from the DAMPE Mission

    CERN Document Server

    CERN. Geneva


    DAMPE (DArk Matter Particle Explorer) is a satellite mission of the Chinese Academy of Sciences (CAS) dedicated to high energy cosmic ray detections. Since its successful launch on December 17th, 2015 a large amount of cosmic ray data has been collected. With relatively large acceptance, DAMPE is designed to detect electrons (and positrons) up to 10 TeV with unprecedented energy resolution to search for new features in the cosmic ray electron plus positron (CRE) spectrum. It will also study cosmic ray nuclei up to 100 TeV with good precision, which will bring new input to the study of their still unknown origin and their propagation through the Galaxy. In this talk, the DAMPE mission will be introduced, together with some details of the construction and on-ground calibration of the detector subsystems. The in-orbit detector commissioning, calibration and operation will be described. First data analysis results, including the recently published CRE spectrum from 25 GeV to 4.6 TeV based on the data collected i...

  13. Radiative damping in plasma-based accelerators

    Directory of Open Access Journals (Sweden)

    I. Yu. Kostyukov


    Full Text Available The electrons accelerated in a plasma-based accelerator undergo betatron oscillations and emit synchrotron radiation. The energy loss to synchrotron radiation may seriously affect electron acceleration. The electron dynamics under combined influence of the constant accelerating force and the classical radiation reaction force is studied. It is shown that electron acceleration cannot be limited by radiation reaction. If initially the accelerating force was stronger than the radiation reaction force, then the electron acceleration is unlimited. Otherwise the electron is decelerated by radiative damping up to a certain instant of time and then accelerated without limits. It is shown that regardless of the initial conditions the infinite-time asymptotic behavior of an electron is governed by a self-similar solution providing that the radiative damping becomes exactly equal to 2/3 of the accelerating force. The relative energy spread induced by the radiative damping decreases with time in the infinite-time limit. The multistage schemes operating in the asymptotic acceleration regime when electron dynamics is determined by the radiation reaction are discussed.

  14. Different effects of aging and gender on the temporal resolution in attentional tracking. (United States)

    Roudaia, Eugenie; Faubert, Jocelyn


    The current study examined the role of temporal resolution of attention in the decline in multiple object tracking abilities with healthy aging. The temporal resolution of attention is known to limit attentional tracking of one and multiple targets (Holcombe & Chen, 2013). Here, we examined whether aging is associated with a lower temporal resolution of attention when tracking one target, the efficiency of splitting attention across multiple targets, or both. Stimuli comprised three concentric rings containing five or 10 equally spaced dots. While maintaining central fixation, younger and older participants tracked a target dot on one, two, or three rings while the rings rotated around fixation in random directions for 5 s. Rotational speed was varied to estimate speed or temporal frequency thresholds in six conditions. Results showed that younger and older participants had similar temporal frequency thresholds for tracking one target, but the addition of one and two more targets reduced thresholds more in the older group compared to the younger group. Gender also affected performance, with men having higher temporal frequency thresholds than women, independently of the number of targets. These findings indicate that the temporal resolution of attention for a single target depends on gender but is not affected by aging, whereas aging specifically affects the efficiency of dividing attention across multiple targets.

  15. Two methods for damping torsional vibrations in DFIG-based wind generators using power converters (United States)

    Zhao, Zuyi; Lu, Yupu; Xie, Da; Yu, Songtao; Wu, Wangping


    This paper proposes novel damping control algorithms by using static synchronous compensator (STATCOM) and energy storage system (ESS) to damp torsional vibrations in doubly fed induction generator (DFIG) based wind turbine systems. It first analyses the operating characteristics of STATCOM and ESS for regulating power variations to increase grid voltage stability. Then, new control strategies for STATCOM and ESS are introduced to damp the vibrations. It is followed by illustration of their effectiveness to damp the drive train torsional vibrations of wind turbines, which can be caused by grid disturbances, such as voltage sags and frequency fluctuations. Results suggest that STATCOM is a promising technology to mitigate the torsional vibrations caused by grid voltage sags. By contrast, the ESS connected to the point of common coupling (PCC) of wind turbine systems shows even obvious advantages because of its capability of absorbing/releasing both active and reactive power. It can thus be concluded that STATCOM is useful for stabilizing power system voltage fluctuations, and ESS is more effective both in regulating PCC voltage fluctuations and damping torsional vibrations caused by grid voltage frequency fluctuations.

  16. Cannabidiol exerts antiepileptic effects by restoring hippocampal interneuron functions in a temporal lobe epilepsy model. (United States)

    Khan, Archie A; Shekh-Ahmad, Tawfeeq; Khalil, Ayatakin; Walker, Matthew C; Ali, Afia B


    A non-psychoactive phytocannabinoid, cannabidiol (CBD), shows promising results as an effective potential antiepileptic drug in some forms of refractory epilepsy. In an attempt to understand the mechanisms by which CBD exerts its anti-seizure effects, we investigated the effects of CBD at synaptic connections, and the intrinsic membrane properties of hippocampal CA1 pyramidal cells and two major inhibitory interneurons: fast spiking, parvalbumin -expressing (PV) and adapting, cholecystokinin-expressing (CCK) interneurons. We also investigated whether in vivo treatment with CBD altered the fate of CCK and PV interneurons using immunohistochemistry. Electrophysiological intracellular whole-cell recordings combined with neuroanatomy were performed in acute brain slices of rat temporal lobe epilepsy (in vivo kainic acid-induced) and in vitro (Mg 2+ -free-induced) epileptic seizure models. For immunohistochemistry experiments, CBD was administered in vivo (100 mg kg -1 ) at zero time and 90 minutes post status epilepticus (SE) induced with kainic acid. Bath-application of CBD (10 μM), dampened excitability at unitary synapses between pyramidal cells, but enhanced inhibitory synaptic potentials elicited by fast spiking and adapting interneurons at postsynaptic pyramidal cells. Furthermore, CBD restored impaired membrane excitability of PV, CCK, and pyramidal cells in a cell type-specific manner. These neuroprotective effects of CBD were corroborated by immunohistochemistry experiments that revealed a significant reduction of atrophy and death of PV- and CCK-expressing interneurons after CBD treatment. In conclusion, our data suggest CBD restores excitability and morphological impairment in epileptic models to pre-epilepsy control levels through multiple mechanisms to restore normal network function. This article is protected by copyright. All rights reserved.

  17. Piezoelectric Vibration Damping Study for Rotating Composite Fan Blades (United States)

    Min, James B.; Duffy, Kirsten P.; Choi, Benjamin B.; Provenza, Andrew J.; Kray, Nicholas


    Resonant vibrations of aircraft engine blades cause blade fatigue problems in engines, which can lead to thicker and aerodynamically lower performing blade designs, increasing engine weight, fuel burn, and maintenance costs. In order to mitigate undesirable blade vibration levels, active piezoelectric vibration control has been investigated, potentially enabling thinner blade designs for higher performing blades and minimizing blade fatigue problems. While the piezoelectric damping idea has been investigated by other researchers over the years, very little study has been done including rotational effects. The present study attempts to fill this void. The particular objectives of this study were: (a) to develop and analyze a multiphysics piezoelectric finite element composite blade model for harmonic forced vibration response analysis coupled with a tuned RLC circuit for rotating engine blade conditions, (b) to validate a numerical model with experimental test data, and (c) to achieve a cost-effective numerical modeling capability which enables simulation of rotating blades within the NASA Glenn Research Center (GRC) Dynamic Spin Rig Facility. A numerical and experimental study for rotating piezoelectric composite subscale fan blades was performed. It was also proved that the proposed numerical method is feasible and effective when applied to the rotating blade base excitation model. The experimental test and multiphysics finite element modeling technique described in this paper show that piezoelectric vibration damping can significantly reduce vibrations of aircraft engine composite fan blades.

  18. Impedance calculations for the improved SLC damping rings

    International Nuclear Information System (INIS)

    Bane, K.L.F.; Ng, C.K.


    A longitudinal, single bunch instability is observed in the damping rings of the Stanford Linear Collider (SLC). Beyond a threshold bunch population of 3 x 10 10 particles the bunch energy spread increases and a ''saw-tooth'' variation in bunch length and synchronous phase as functions of time is observed. Although the relative amplitude of the saw-tooth variation is small-only on the order of 10% -- the resulting unpredictability of the beam properties in the rest of the SLC accelerator makes it difficult, if not impossible, to operate the machine above the threshold current. An additional problem at higher currents is that the bunch length is greatly increased. When the bunch is very long in the ring it becomes difficult or impossible to properly compress it after extraction. We want to solve both of these problems so that the SLC can run at higher currents to increase the luminosity. In order to solve these problems the vacuum chambers of both damping rings are being rebuilt with the aim of reducing their impedance. According to previous calculations the impedance the SLC damping rings is dominated by the many small discontinuities that are located in the so-called QD and QF vacuum chamber segments -- elements such as transitions, masks, bellows-that are inductive to the beam, Since these earlier calculations were performed the bellows of the QD segments have been sleeved, yielding a factor of 2 increase in the instability threshold. In this paper we begin by discussing the gains that might be achieved if we can reduce the impedance of the rings even further. Then we estimate the effect on the total impedance of the actual design changes that are being proposed. Three important elements -- the bend-to-quad transitions, the distributed ion pump slots, and the beam position monitor (BPM) electrodes are fully 3-dimensional and will be studied using T3 of the MAFIA computer programs

  19. Robustness analysis of active damping methods for an inverter connected to the grid with an LCL-filter

    DEFF Research Database (Denmark)

    Ricchiuto, D.; Liserre, M.; Kerekes, Tamas


    Grid-connected converters usually employ an LCL-filter to reduce PWM harmonics. To avoid the wellknown stability problems it is requested to use either passive or active damping methods. Active damping methods avoid losses and preserve the filter effectiveness but they are more sensitive...... to parameters variation. In this paper the robustness of active damping methods is investigated considering those using only the same state variable (grid-side or converter-side current) normally used for current control (filter-based) or those methods using more state-variables (multiloop). Simulation...

  20. Improved damp heat stability of Ga-Doped ZnO thin film by pretreatment of the polyethylene terephthalate substrate (United States)

    Kim, B. B.; Seo, S. G.; Lim, Y. S.; Choi, H.-S.; Seo, W.-S.; Park, H.-H.


    A study on the damp heat stability of transparent conducting ZnO thin film grown on a polyethylene terephthalate substrate (PET) is reported. By thermal annealing of the PET substrate at 100°C with Ar flow in a vacuum chamber prior to the sputtering growth of Ga-doped ZnO (GZO) thin film, significantly enhanced damp heat stability was achieved at 60°C with a 90% relative humidity. Electrical and structural characterizations of the GZO thin films were carried out and the effects of the pretreatment on the improved damp heat stability are discussed.

  1. A Particle-in-Cell simulation of temporal plasma echo in the presence of Coulomb collisions (United States)

    Wu, B. Z.; Nishimura, Y.; Wang, C. P.


    Particle-in-Cell simulation is developed to study temporal plasma echo of electron plasma wave. By imposing two external pulse electric fields to the plasma (pulse-like in time) the echo signal is observed. Coulomb collisional effect manifests itself as a shift of the echo peak and the damping of the peak amplitude, which can be seen by adding (rather phenomenological) frictional force to the electron equation of motion. A first principle based binary collision model is incorporated into the numerical simulation.

  2. Reactive power control of DFIG wind turbines for power oscillation damping under a wide range of operating conditions


    Edrah, Mohamed; Lo, Kwok L.; Anaya-Lara, Olimpo


    This study analyses the effect of replacing existing synchronous generators (SGs) equipped with power system stabilisers (PSS) by doubly fed induction generator (DFIG) based wind farms on the damping of power system oscillations in a multi-machine power system. A power system stabiliser was designed to enhance the capability of DFIG to damp power systems oscillations. The validity and effectiveness of the proposed controller are demonstrated on the widely used New England 10-machine 39-bus te...

  3. Individual differences in the discrimination of novel speech sounds: effects of sex, temporal processing, musical and cognitive abilities. (United States)

    Kempe, Vera; Thoresen, John C; Kirk, Neil W; Schaeffler, Felix; Brooks, Patricia J


    This study examined whether rapid temporal auditory processing, verbal working memory capacity, non-verbal intelligence, executive functioning, musical ability and prior foreign language experience predicted how well native English speakers (N=120) discriminated Norwegian tonal and vowel contrasts as well as a non-speech analogue of the tonal contrast and a native vowel contrast presented over noise. Results confirmed a male advantage for temporal and tonal processing, and also revealed that temporal processing was associated with both non-verbal intelligence and speech processing. In contrast, effects of musical ability on non-native speech-sound processing and of inhibitory control on vowel discrimination were not mediated by temporal processing. These results suggest that individual differences in non-native speech-sound processing are to some extent determined by temporal auditory processing ability, in which males perform better, but are also determined by a host of other abilities that are deployed flexibly depending on the characteristics of the target sounds.

  4. [Construction of MHV-A59 damp-heat mouse model and analysis of the relevant indices]. (United States)

    Tang, Zhao-hui; Su, Li-xian; Li, Hua-feng; Guo, Jin-qiang; Luo, Bing-de; Lin, Pei-zheng


    To explore the impact of inflammation, water metabolism and immune function on the establishment of a mouse model of damp-heat syndrome with MHV-A59 infection. Twenty-four mice were randomly divided into control group, virus group, damp-heat group and model group. The peripheral blood CD4(+) and CD8(+) lymphocytes were detected by flow cytometry, and the serum levels of IFN-γ and IL-4 were assayed by ELISA. The expressions of NF-κB and AQP4 in the liver and stomach were determined using immunohistochemistry. The expression of NF-κB and CD4(+)/CD8(+) ratio in the virus and model groups were significantly higher than those in the damp-heat and control groups, while the expression of AQP4 was significantly higher in the model and damp-heat groups than in the other groups. Compared with the control group, the model group showed a significantly higher ratio of IFN-γ/IL-4. MHV-A59 virus is the main cause of elevated NF-κB expression and CD4(+)/CD8(+)/ ratio, while damp-heat syndrome is responsible for increased AQP4 expression, and their synergistic effect results in increased IFN-γ/IL-4 ratio. The mouse model established using MHV-A59 virus and the damp-heat factors can mimic damp-heat syndrome described in traditional Chinese medicine theory.

  5. Design and test of a novel isolator with negative resistance electromagnetic shunt damping

    International Nuclear Information System (INIS)

    Yan, Bo; Zhang, Xinong; Niu, Hongpan


    This paper proposes a negative resistance electromagnetic shunt damping vibration isolator and investigates the effectiveness of the isolator. The isolator consists of a shunt circuit and a pair of electromagnet and permanent magnets that are pasted onto a box-shaped spring. A kind of negative resistance shunt impedance is proposed to cancel the inherent resistance of the electromagnet. The electromechanical coupling coefficient and the electromagnetic damping force calculation formula are obtained by Biot–Savart’s law and Ampère’s law, respectively. A single degree of freedom system is employed to verify the performance of the proposed isolator. The governing equation is established. The performance of the proposed isolator under a half-cycle sine pulse is investigated and discussed. Experiments were carried out and the results agreed well with the numerical predictions. Both the results demonstrate that the negative resistance electromagnetic shunt damping vibration isolator could suppress vibration transmitted to the structure effectively. (paper)

  6. Damping test results for straight sections of 3-inch and 8-inch unpressurized pipes. [PWR; BWR

    Energy Technology Data Exchange (ETDEWEB)

    Ware, A.G.; Thinnes, G.L.


    EG and G Idaho is assisting the Nuclear Regulatory Commission and the Pressure Vessel Research Committee in supporting a final position on revised damping values for structural analyses of nuclear piping systems. As part of this program, a series of vibrational tests on unpressurized 3-in. and 8-in. Schedule 40 carbon steel piping was conducted to determine the changes in structural damping due to various parametric effects. The 33-ft straight sections of piping were supported at the ends. Additionally, intermediate supports comprising spring, rod, and constant-force hangers, as well as a sway brace and snubbers, were used. Excitation was provided by low-force-level hammer impacts, a hydraulic shaker, and a 50-ton overhead crane for snapback testing. Data was recorded using acceleration, strain, and displacement time histories. This report presents test results showing the effect of stress level and type of supports on structural damping in piping.

  7. Damping test results for straight sections of 3-inch and 8-inch unpressurized pipes

    International Nuclear Information System (INIS)

    Ware, A.G.; Thinnes, G.L.


    EG and G Idaho is assisting the Nuclear Regulatory Commission and the Pressure Vessel Research Committee in supporting a final position on revised damping values for structural analyses of nuclear piping systems. As part of this program, a series of vibrational tests on unpressurized 3-in. and 8-in. Schedule 40 carbon steel piping was conducted to determine the changes in structural damping due to various parametric effects. The 33-ft straight sections of piping were supported at the ends. Additionally, intermediate supports comprising spring, rod, and constant-force hangers, as well as a sway brace and snubbers, were used. Excitation was provided by low-force-level hammer impacts, a hydraulic shaker, and a 50-ton overhead crane for snapback testing. Data was recorded using acceleration, strain, and displacement time histories. This report presents test results showing the effect of stress level and type of supports on structural damping in piping

  8. High Frequency Resonance Damping of DFIG based Wind Power System under Weak Network

    DEFF Research Database (Denmark)

    Song, Yipeng; Wang, Xiongfei; Blaabjerg, Frede


    When operating in a micro or weak grid which has a relatively large network impedance, the Doubly Fed Induction Generator (DFIG) based wind power generation system is prone to suffer high frequency resonance due to the impedance interaction between DFIG system and the parallel compensated network...... (series RL + shunt C). In order to improve the performance of the DFIG system as well as other units and loads connected to the weak grid, the high frequency resonance needs to be effectively damped. In this paper, the proposed active damping control strategy is able to implement effective damping either...... in the Rotor Side Converter (RSC) or in the Grid Side Converter (GSC), through the introduction of virtual positive capacitor or virtual negative inductor to reshape the DFIG system impedance and mitigate the high frequency resonance. A detailed theoretical explanation on the virtual positive capacitor...

  9. Influence of internal stresses on field-dependent elastic modulus and damping in pure nickel

    International Nuclear Information System (INIS)

    Morales, A.L.; Nieto, A.J.; Chicharro, J.M.; Pintado, P.; Rodriguez, G.P.; Herranz, G.


    Measurements of the ΔE-effect and magnetomechanical damping are reported for crystalline pure nickel under several states of internal stresses. The different internal stresses are obtained by means of a wide variety of heat treatments and studied via microscopic examination and measurement. The influence of the heating temperature, the heating time and the cooling method on the magnetoelastic properties is studied. Our results make it possible to select the most suitable heat treatment for each application and to optimize the magnetoelastic response of nickel. Relative variations from 2% to 13% can be obtained in the ΔE-effect, whereas relative variations from 40.0% to 99.9% are possible in magnetomechanical damping, in terms of specific damping capacity.

  10. Influence of internal stresses on field-dependent elastic modulus and damping in pure nickel

    Energy Technology Data Exchange (ETDEWEB)

    Morales, A.L., E-mail: AngelLuis.Morales@uclm.e [Area de Ingenieria Mecanica, E.T.S. Ingenieros Industriales (Universidad de Castilla - La Mancha), Edificio Politecnico, Avda. Camilo Jose Cela s/n, 13071 Ciudad Real (Spain); Nieto, A.J.; Chicharro, J.M.; Pintado, P. [Area de Ingenieria Mecanica, E.T.S. Ingenieros Industriales (Universidad de Castilla - La Mancha), Edificio Politecnico, Avda. Camilo Jose Cela s/n, 13071 Ciudad Real (Spain); Rodriguez, G.P.; Herranz, G. [Area de Ciencia de los Materiales e Ingenieria Metalurgica, E.T.S. Ingenieros Industriales (Universidad de Castilla - La Mancha), Edificio Politecnico, Avda. Camilo Jose Cela s/n, 13071 Ciudad Real (Spain)


    Measurements of the {Delta}E-effect and magnetomechanical damping are reported for crystalline pure nickel under several states of internal stresses. The different internal stresses are obtained by means of a wide variety of heat treatments and studied via microscopic examination and measurement. The influence of the heating temperature, the heating time and the cooling method on the magnetoelastic properties is studied. Our results make it possible to select the most suitable heat treatment for each application and to optimize the magnetoelastic response of nickel. Relative variations from 2% to 13% can be obtained in the {Delta}E-effect, whereas relative variations from 40.0% to 99.9% are possible in magnetomechanical damping, in terms of specific damping capacity.

  11. Field-dependent elastic modulus and damping in pure iron, nickel and cobalt

    International Nuclear Information System (INIS)

    Morales, A.L.; Nieto, A.J.; Chicharro, J.M.; Pintado, P.


    Measurements of the ΔE-effect and magnetomechanical damping are reported for crystalline pure iron, nickel and cobalt bars. An automatic experimental system for measuring both magnitudes simultaneously has been used, taking advantage of its improved features which make it possible to include stress-dependence and path-dependence (due to magnetic hysteresis loop) studies in this work. Our results not only provide a useful qualitative comparison among the magnetoelastic behaviour of these three classic ferromagnetic materials, but also show a useful set of quantitative ΔE-effect and magnetomechanical damping values.

  12. Urban heat island effect: A systematic review of spatio-temporal factors, data, methods, and mitigation measures (United States)

    Deilami, Kaveh; Kamruzzaman, Md.; Liu, Yan


    Despite research on urban heat island (UHI) effect has increased exponentially over the last few decades, a systematic review of factors contributing to UHI effect has scarcely been reported in the literature. This paper provides a systematic and overarching review of different spatial and temporal factors affecting the UHI effect. UHI is a phenomenon when urban areas experience a higher temperature than their surrounding non-urban areas and is considered as a critical factor contributing to global warming, heat related mortalities, and unpredictable climatic changes. Therefore, there is a pressing need to identify the spatio-temporal factors that contribute to (or mitigate) the UHI effect in order to develop a thorough understanding of their causal mechanism so that these are addressed through urban planning policies. This paper systematically identified 75 eligible studies on UHI effect and reviews the nature and type of satellite images used, the techniques applied to classify land cover/use changes, the models to assess the link between spatio-temporal factors and UHI effect, and the effects of these factors on UHI. The review results show that: a) 54% of the studies used Landsat TM images for modelling the UHI effect followed by Landsat ETM (34%), and MODIS (28%); b) land cover indices (46%), followed by supervised classification (17%) were the dominant methods to derive land cover/use changes associated with UHI effect; c) ordinary least square regression is the most commonly applied method (68%) to investigate the link between different spatio-temporal factors and the UHI effect followed by comparative analysis (33%); and d) the most common factors affecting the UHI effect as reported in the reviewed studies, include vegetation cover (44%), season (33%), built-up area (28%), day/night (25%), population density (14%), water body (12%) together with others. This research discusses the findings in policy terms and provides directions for future research.

  13. Temporal analysis of the effect of extruded flaxseed on the swine gut microbiota. (United States)

    Holman, Devin B; Baurhoo, Bushansingh; Chénier, Martin R


    Flaxseed is a rich source of α-linolenic acid, an essential ω-3 fatty acid reported to have beneficial health effects in humans. Feeding swine a diet supplemented with flaxseed has been found to enrich pork products with ω-3 fatty acids. However, the effect of flaxseed supplementation on the swine gut microbiota has not been assessed to date. The purpose of this study was to investigate if extruded flaxseed has any impact on the bacterial and archaeal microbiota in the feces of growing-finishing pigs over a 51-day period, using denaturing gradient gel electrophoresis (DGGE) and real-time PCR. Bacterial DGGE profile analysis revealed major temporal shifts in the bacterial microbiota with only minor ones related to diet. The archaeal microbiota was significantly less diverse than that of Bacteria. The majority of bacterial DGGE bands sequenced belonged to the Firmicutes phylum while the archaeal DGGE bands were found to consist of only 2 species, Methanobrevibacter smithii and Methanosphaera stadtmanae. The abundance of Bacteroidetes decreased significantly from day 0 to day 21 in all diet groups while the abundance of Firmicutes was relatively stable across all diet cohorts and sampling times. There was also no significant correlation between pig mass and the ratio of Firmicutes to Bacteroidetes. While the addition of extruded flaxseed to the feed of growing-finishing pigs was beneficial for improving ω-3 fatty acid content of pork, it had no detectable impact on the fecal bacterial and archaeal microbiota, suggesting that extruded flaxseed may be used to improve meat quality without adverse effect on the swine gut microbiota or animal performance.

  14. Effects of climate and terrestrial storage on temporal variability of actual evapotranspiration (United States)

    Wu, Chuanhao; Hu, Bill X.; Huang, Guoru; Zhang, Hang


    Knowledge of the temporal variability in actual evapotranspiration (E) is essential for a better understanding of the interaction and feedback between atmospheric and land surface hydrologic processes under various natural and anthropogenic conditions. Recently, Zeng and Cai (2015) proposed a decomposition framework of the E variance, based on water balance and the Budyko hypothesis. On the basis of a long-term (1960-2008) land surface dataset, this study applies the theoretical framework to assess the effects of climate and terrestrial storage factors on the interannual and intra-annual variance in E across China. An error decomposition framework is developed to quantify the key factors in the error of the predicted E variance. The results show that the prediction of the E variance is more accurate in arid climates than in humid climates, and the corresponding error is primarily controlled by the variability of precipitation (P) and runoff (R). Climate is the primary source for the E variance, and the dominant sources shift from potential evaporation (PET) in humid climates to P in arid climates. The interactions between P and PET tend to dampen the E interannual variance and enhance the E intra-annual variance, and this effect is especially significant in humid climates. Terrestrial storage change is more capable of accommodating climatic fluctuations at the intra-annual scale than at the interannual scale, and for some arid regions it is the dominant factor influencing the E variance. The response of terrestrial storage to P is more significant than its response to PET, especially for regions with strong human impact. Neglecting the effects of terrestrial storage would possibly underestimate or overestimate the E variance in both humid and arid climates, due to the interactions between climate and the change in the terrestrial storage.

  15. Mapping the spatio-temporal risk of lead exposure in apex species for more effective mitigation (United States)

    Mateo-Tomás, Patricia; Olea, Pedro P.; Jiménez-Moreno, María; Camarero, Pablo R.; Sánchez-Barbudo, Inés S.; Rodríguez Martín-Doimeadios, Rosa C.; Mateo, Rafael


    Effective mitigation of the risks posed by environmental contaminants for ecosystem integrity and human health requires knowing their sources and spatio-temporal distribution. We analysed the exposure to lead (Pb) in griffon vulture Gyps fulvus—an apex species valuable as biomonitoring sentinel. We determined vultures' lead exposure and its main sources by combining isotope signatures and modelling analyses of 691 bird blood samples collected over 5 years. We made yearlong spatially explicit predictions of the species risk of lead exposure. Our results highlight elevated lead exposure of griffon vultures (i.e. 44.9% of the studied population, approximately 15% of the European, showed lead blood levels more than 200 ng ml−1) partly owing to environmental lead (e.g. geological sources). These exposures to environmental lead of geological sources increased in those vultures exposed to point sources (e.g. lead-based ammunition). These spatial models and pollutant risk maps are powerful tools that identify areas of wildlife exposure to potentially harmful sources of lead that could affect ecosystem and human health. PMID:27466455

  16. Spatio-temporal trends of nitrogen deposition and climate effects on Sphagnum productivity in European peatlands

    International Nuclear Information System (INIS)

    Granath, Gustaf; Limpens, Juul; Posch, Maximilian; Mücher, Sander; Vries, Wim de


    To quantify potential nitrogen (N) deposition impacts on peatland carbon (C) uptake, we explored temporal and spatial trends in N deposition and climate impacts on the production of the key peat forming functional group (Sphagnum mosses) across European peatlands for the period 1900–2050. Using a modelling approach we estimated that between 1900 and 1950 N deposition impacts remained limited irrespective of geographical position. Between 1950 and 2000 N deposition depressed production between 0 and 25% relative to 1900, particularly in temperate regions. Future scenarios indicate this trend will continue and become more pronounced with climate warming. At the European scale, the consequences for Sphagnum net C-uptake remained small relative to 1900 due to the low peatland cover in high-N areas. The predicted impacts of likely changes in N deposition on Sphagnum productivity appeared to be less than those of climate. Nevertheless, current critical loads for peatlands are likely to hold under a future climate. - Highlights: • We model the effect of N deposition combined with climate on production of Sphagnum between 1900 and 2050. • Spatially explicit projections are indicated on an updated European peatland distribution map. • Results stress the vulnerability of temperate Sphagnum peatlands to current and future N deposition. • Future impacts of N deposition on Sphagnum productivity likely depend more on climate change than on N deposition rate. - Temperate Sphagnum peatlands are vulnerable to current and future N deposition and current critical loads for peatlands are likely to hold under a future climate

  17. Spatial and Temporal Variation in the Effects of Climatic Variables on Dugong Calf Production. (United States)

    Fuentes, Mariana M P B; Delean, Steven; Grayson, Jillian; Lavender, Sally; Logan, Murray; Marsh, Helene


    Knowledge of the relationships between environmental forcing and demographic parameters is important for predicting responses from climatic changes and to manage populations effectively. We explore the relationships between the proportion of sea cows (Dugong dugon) classified as calves and four climatic drivers (rainfall anomaly, Southern Oscillation El Niño Index [SOI], NINO 3.4 sea surface temperature index, and number of tropical cyclones) at a range of spatially distinct locations in Queensland, Australia, a region with relatively high dugong density. Dugong and calf data were obtained from standardized aerial surveys conducted along the study region. A range of lagged versions of each of the focal climatic drivers (1 to 4 years) were included in a global model containing the proportion of calves in each population crossed with each of the lagged versions of the climatic drivers to explore relationships. The relative influence of each predictor was estimated via Gibbs variable selection. The relationships between the proportion of dependent calves and the climatic drivers varied spatially and temporally, with climatic drivers influencing calf counts at sub-regional scales. Thus we recommend that the assessment of and management response to indirect climatic threats on dugongs should also occur at sub-regional scales.

  18. A data science approach for quantifying spatio-temporal effects to graft failures in organ transplantation. (United States)

    Pinheiro, Diego; Hamad, Farag; Cadeiras, Martin; Menezes, Ronaldo; Nezamoddini-Kachouie, Nezamoddin


    The transplantation of solid organs is one of the most important accomplishments of modern medicine. Yet, organ shortage is a major public health issue; 8,000 people died while waiting for an organ in 2014. Meanwhile, the allocation system currently implemented can lead to organs being discarded and the medical community still investigates factors that affects early graft failure such as distance and ischemic time. In this paper, we investigate early graft failure under a spatio-temporal perspective using a data science unified approach for all six organs that is based on complementary cumulative analysis of both distance and ischemic time. Interestingly, although distance seems to highly affect some organs (e.g. liver), it appears to have no effect on others (e.g. kidney). Similarly, the results on ischemic time confirm it affects early graft failure with higher influence for some organs such as (e.g. heart) and lower influence for others such as (e.g. kidney). This poses the question whether the allocation policies should be individually designed for each organ in order to account for their particularities as shown in this work.

  19. Feeding habits and trophic ecology of Dasyatis longa (Elasmobranchii: Myliobatiformes): sexual, temporal and ontogenetic effects. (United States)

    López-García, J; Navia, A F; Mejía-Falla, P A; Rubio, E A


    Sexual, ontogenic and temporal effects in the diet of Dasyatis longa were evaluated to determine feeding habits and trophic ecology. Numeric indices and the index of relative importance were applied to establish the feeding strategy of the species. Independence of the diet with respect to sex, dry or rainy season and size was evaluated with contingency tables, correspondence analysis and multivariate analysis (MANOVA). The trophic relationships of D. longa (by sex and size intervals) were determined using Levin's niche breadth index and the Pianka's diet overlap index and their significance was determined by null models. The trophic level for each size interval and the species was also calculated. Dasyatis longa showed a narrow niche breadth feeding mainly on shrimps and fishes and its diet was dependent on size, but not on sex or season. Juvenile individuals (class I) fed on shrimps, sub-adults (class II) on fishes and adults (class III) on stomatopods. Significant overlaps between size classes I and II and classes II and III were found. The trophic level shows D. longa to be a secondary or tertiary consumer. Due to considerable fishing pressures on shrimps, the principal prey of D. longa, it will be important to determine their ability to adapt to changes in prey populations. © 2012 The Authors. Journal of Fish Biology © 2012 The Fisheries Society of the British Isles.

  20. Effect of explant density and medium culture volumes on cassava micropropagation in Temporal Immersion System


    Milagros Basail; Victor Medero; Marilyn Martínez; José de la C. Ventura; Jorge López; Magaly García; Manuel Cabrera; Arletys Santos; Aymé Rayas; Carmen Pons; Maricel Bauta; Miguel Álvarez; Jesús García


    Due to the need of producing high quality planting material available to cassava growers, it has been necessary to look for alternatives in order to increase the efficiancy of in vitro propagation methods and their automation, such as the use of the Temporal Immersion Systems (RITA®). This work was carried out to increase the multiplication coefficient for cassava mass propagation through out Temporal Immersion Systems. The clone ‘CMC-40’ was used. Different medium volumes per explant, and ma...