WorldWideScience

Sample records for template light-induced acceleration

  1. Photoisomerization of a rotaxane hydrogen bonding template: light-induced acceleration of a large amplitude rotational motion.

    Science.gov (United States)

    Gatti, Francesco G; León, Salvador; Wong, Jenny K Y; Bottari, Giovanni; Altieri, Andrea; Morales, M Angeles Farran; Teat, Simon J; Frochot, Céline; Leigh, David A; Brouwer, Albert M; Zerbetto, Francesco

    2003-01-07

    Establishing methods for controlling aspects of large amplitude submolecular movements is a prerequisite for the development of artificial devices that function through rotary motion at the molecular level. Here we demonstrate that the rate of rotation of the interlocked components of fumaramide-derived [2]rotaxanes can be accelerated, by >6 orders of magnitude, by isomerizing them to the corresponding maleamide [2]rotaxanes by using light.

  2. Photoisomerization of a rotaxane hydrogen bonding template: light-induced acceleration of a large amplitude rotational motion

    NARCIS (Netherlands)

    Gatti, F.G.; Lent, S.; Wong, J.K.Y.; Bottari, G.; Altieri, A.; Teat, S.J.; Frochot, C.; Leigh, D.A.; Brouwer, A.M.

    2003-01-01

    Establishing methods for controlling aspects of large amplitude submolecular movements is a prerequisite for the development of artificial devices that function through rotary motion at the molecular level. Here we demonstrate that the rate of rotation of the interlocked components of

  3. Light-induced alterations of pineapple (Ananas comosus [L.] Merr.) juice volatiles during accelerated ageing and mass spectrometric studies into their precursors.

    Science.gov (United States)

    Steingass, Christof Björn; Glock, Mona Pia; Lieb, Veronika Maria; Carle, Reinhold

    2017-10-01

    Alterations of volatiles during accelerated light-induced ageing of pineapple juice were assessed by HS-SPME-GC-MS in a non-targeted profiling analysis over a 16-week period. Multivariate statistics permitted to reveal substantial chemical markers generally describing the effect of light storage. Volatiles generated comprised phenylpropenes, carbonyls, 2-methylthiophene, toluene, and furfural, while concentrations of methyl and ethyl esters, terpenes, and furanones decreased. In addition, the qualitative composition of phenolic compounds and glycoside-bound volatiles in selected samples was characterized by HPLC-DAD-ESI-MS(n) as well as HR-ESI-MS. The fresh juice contained unique pineapple metabolites such as S-p-coumaryl, S-coniferyl, S-sinapylglutathione, and structurally related derivatives. Among others, the presence of p-coumaroyl, feruloyl, and caffeoylisocitrate as well as three 4-hydroxy-2,5-dimethyl-3(2H)-furanone glycosides in pineapples could be substantiated by the HR-ESI-MS experiment. Mass spectrometric assignments of selected metabolites are presented, and putative linkages between volatiles and their precursors are established. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Accelerating gravitational wave parameter estimation with multi-band template interpolation

    Science.gov (United States)

    Vinciguerra, Serena; Veitch, John; Mandel, Ilya

    2017-06-01

    Parameter estimation on gravitational wave signals from compact binary coalescence (CBC) requires the evaluation of computationally intensive waveform models, typically the bottleneck in the analysis. This cost will increase further as low frequency sensitivity in later second and third generation detectors motivates the use of longer waveforms. We describe a method for accelerating parameter estimation by exploiting the chirping behaviour of the signals to sample the waveform sparsely for portions where the full frequency resolution is not required. We demonstrate that the method can reproduce the original results with a waveform mismatch of  ⩽ 5× 10-7 , but with a waveform generation cost up to ∼50 times lower for computationally costly frequency-domain waveforms starting from below 8 Hz.

  5. VUV/UV light inducing accelerated phenol degradation with a low electric input† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6ra26043h Click here for additional data file.

    Science.gov (United States)

    Li, Mengkai; Wen, Dong

    2017-01-01

    This study presents the first evidence for the accelerated degradation of phenol by Fenton's reagent in a mini-fluidic VUV/UV photoreaction system (MVPS). A low-pressure mercury lamp used in the MVPS led to a complete degradation of phenol within 4–6 min. The HO˙ and HO2˙ originating from both Fenton's reagent and VUV photolysis of water were identified with suitable radical scavengers. The effects of initial concentrations of phenol, H2O2 and Fe3+ as well as solution pH on phenol degradation kinetics were examined. Increasing the initial phenol concentration slowed down the phenol degradation, whereas increasing the initial H2O2 or Fe3+ concentration accelerated the phenol degradation. The optimal solution pH was 3.7. At both 254 and 185 nm, increasing phenol concentration enhanced its absorption for the incident photons. The reaction mechanism for the degradation of phenol was suggested consistent with the results obtained. This study indicates that the VUV/UV photo-Fenton process has potential applications in the treatment of industrial wastewater containing phenol and related aromatic pollutants. PMID:28496972

  6. Light-induced functions in DNA.

    Science.gov (United States)

    Reisacher, Ulrike; Antusch, Linda; Hofsäß, Robert; Schwechheimer, Christian; Lehmann, Benjamin; Wagenknecht, Hans-Achim

    2017-10-01

    The chemical toolbox for synthetic modification by nucleotide building blocks and postsynthetic methods delivers light-induced functions to DNA in great variety and allows not only to initiate photoinduced processes but additionally the temporal and spatial control of these artificial functions. Herein, selected light-induced artificial functions in DNA are briefly summarized. This includes the postsynthetic 'photoclick' labeling strategy, benzophenone and acetophenone nucleosides as photosensitizers to induce [2+2] cycloadditions, molecular switches and energy transfer based fluorophore pairs, called "DNA traffic lights". Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Light-induced decomposition of indocyanine green.

    Science.gov (United States)

    Engel, Eva; Schraml, Rüdiger; Maisch, Tim; Kobuch, Karin; König, Burkhard; Szeimies, Rolf-Markus; Hillenkamp, Jost; Bäumler, Wolfgang; Vasold, Rudolf

    2008-05-01

    To investigate the light-induced decomposition of indocyanine green (ICG) and to test the cytotoxicity of light-induced ICG decomposition products. ICG in solution was irradiated with laser light, solar light, or surgical endolight. The light-induced decomposition of ICG was analyzed by high-performance liquid chromatography (HPLC) and mass spectrometry. Porcine retinal pigment epithelial (RPE) cells were incubated with the light-induced decomposition products of ICG, and cell viability was measured by trypan blue exclusion assay. Independent of the light source used, singlet oxygen (photodynamic type 2 reaction) is generated by ICG leading to dioxetanes by [2+2]-cycloaddition of singlet oxygen. These dioxetanes thermally decompose into several carbonyl compounds. The decomposition products were identified by mass spectrometry. The decomposition of ICG was inhibited by adding sodium azide, a quencher of singlet oxygen. Incubation with ICG decomposition products significantly reduced the viability of RPE cells in contrast to control cells. ICG is decomposed by light within a self-sensitized photo oxidation. The decomposition products reduce the viability of RPE cells in vitro. The toxic effects of decomposed ICG should be further investigated under in vivo conditions.

  8. UV Light Induces Dedoping of Polyaniline

    Directory of Open Access Journals (Sweden)

    Yuki Kaitsuka

    2016-01-01

    Full Text Available UV (Ultra-Violet light-driven change in optical absorption of polyaniline (PANI is reported. Irradiation of UV light to PANI/camphor sulfonic acid prepared by electrochemical polymerization allows dedoping of the PANI. Especially, UV light irradiation in the presence of a radical trap agent effectively reduces (dedoping the PANI. The result in this study is quite simple; however, this may be a first report for light-induced dedoping (color change of a conductive polymer.

  9. Report Template

    DEFF Research Database (Denmark)

    Bjørn, Anders; Laurent, Alexis; Owsianiak, Mikołaj

    2017-01-01

    To ensure consistent reporting of life cycle assessment (LCA), we provide a report template. The report includes elements of an LCA study as recommended but the ILCD Handbook. Illustrative case study reported according to this template is presented in Chap. 39 ....

  10. l-Serine Enhances Light-Induced Circadian Phase Resetting in Mice and Humans.

    Science.gov (United States)

    Yasuo, Shinobu; Iwamoto, Ayaka; Lee, Sang-Il; Ochiai, Shotaro; Hitachi, Rina; Shibata, Satomi; Uotsu, Nobuo; Tarumizu, Chie; Matsuoka, Sayuri; Furuse, Mitsuhiro; Higuchi, Shigekazu

    2017-12-01

    Background: The circadian clock is modulated by the timing of ingestion or food composition, but the effects of specific nutrients are poorly understood.Objective: We aimed to identify the amino acids that modulate the circadian clock and reset the light-induced circadian phase in mice and humans.Methods: Male CBA/N mice were orally administered 1 of 20 l-amino acids, and the circadian and light-induced phase shifts of wheel-running activity were analyzed. Antagonists of several neurotransmitter pathways were injected before l-serine administration, and light-induced phase shifts were analyzed. In addition, the effect of l-serine on the light-induced phase advance was investigated in healthy male students (mean ± SD age 22.2 ± 1.8 y) by using dim-light melatonin onset (DLMO) determined by saliva samples as an index of the circadian phase.Results: l-Serine administration enhanced light-induced phase shifts in mice (1.86-fold; P light-dark cycle by 6 h, l-serine administration slightly accelerated re-entrainment to the shifted cycle. In humans, l-serine ingestion before bedtime induced significantly larger phase advances of DLMO after bright-light exposure during the morning (means ± SEMs-l-serine: 25.9 ± 6.6 min; placebo: 12.1 ± 7.0 min; P light-induced phase resetting in mice and humans, and it may be useful for treating circadian disturbances. © 2017 American Society for Nutrition.

  11. Light-induced fluorescence for pulpal diagnosis

    Science.gov (United States)

    Ebihara, Arata; Liaw, Lih-Huei L.; Krasieva, Tatiana B.; Wilder-Smith, Petra B. B.

    2001-04-01

    A direct non-histological means of pulpal diagnosis remains elusive to clinical practice. Clinical vitality testing remains limited to electric, thermal criteria, or laser Doppler flowmetry. The goal of these investigations was to determine the feasibility of using light-induced fluorescence as a non-invasive modality for pulpal evaluation. Such a capability would, for example, permit expanded use of pulpotomy/pulpectomy techniques. Clinically healthy and diseased human extirpated pulpal tissues were used in this study. After excision, they were rapidly frozen and standard cryosections prepared. Measurement of tissue excitation/emission characteristics was performed using spectrographic analysis. A low-light level fluorescence microscopy system was then used to image autofluorescence localization and intensity at optimal excitation/detection parameters. Excitation/detection parameters used in this study included 405/605, 405/635, 405/670, 440/550, and 440/635. Autofluorescence intensities in healthy tissues were significantly stronger than those in diseased tissues at optimal parameters. It is postulated that autofluorescence characteristics are related to pathology- related structural changes in the pulp. This work provides the basis for further investigation into the relation between autofluorescence, histology and clinical symptoms.

  12. Light-induced quantitative microprinting of biomolecules

    Science.gov (United States)

    Strale, Pierre-Olivier; Azioune, Ammar; Bugnicourt, Ghislain; Lecomte, Yohan; Chahid, Makhlad; Studer, Vincent

    2017-02-01

    Printing of biomolecules on substrates has developed tremendously in the past few years. The existing methods either rely on slow serial writing processes or on parallelized photolithographic techniques where cumbersome mask alignment procedures usually impair the ability to generate multi-protein patterns. We recently developed a new technology allowing for high resolution multi protein micro-patterning. This technology named "Light-Induced Molecular Adsorption of Proteins (LIMAP)" is based on a water-soluble photo-initiator able to reverse the antifouling property of polymer brushes when exposed to UV light. We developed a wide-field pattern projection system based on a DMD coupled to a conventional microscope which permits to generate arbitrary grayscale patterns of UV light at the micron scale. Interestingly, the density of adsorbed molecules scales with the dose of UV light thus allowing the quantitative patterning of biomolecules. The very low non specific background of biomolecules outside of the UV-exposed areas allows for the sequential printing of multiple proteins without alignment procedures. Protein patterns ranging from 500 nm up to 1 mm can be performed within seconds, as well as gradients of arbitrary shapes. The range of applications of the LIMAP approach extends from the single molecule up to the multicellular scale with an exquisite control over local protein density. We show that it can be used to generate complex protein landscapes useful to study protein-protein, cell-cell and cell-matrix interactions.

  13. Light-induced vegetative anthocyanin pigmentation in Petunia

    National Research Council Canada - National Science Library

    Nick W. Albert; David H. Lewis; Huaibi Zhang; Louis J. Irving; Paula E. Jameson; Kevin M. Davies

    2009-01-01

    The Lc petunia system, which displays enhanced, light-induced vegetative pigmentation, was used to investigate how high light affects anthocyanin biosynthesis, and to assess the effects of anthocyanin...

  14. Light-induced reversible expansion of individual gold nanoplates

    Directory of Open Access Journals (Sweden)

    Jinsheng Lu

    2017-10-01

    Full Text Available Light-induced mechanical response of materials has been extensively investigated and widely utilized to convert light energy into mechanical energy directly. The metallic nanomaterials have excellent photothermal properties and show enormous potential in micromechanical actuators, etc. However, the photo-thermo-mechanical properties of individual metallic nanostructures have yet to be well investigated. Here, we experimentally demonstrate a way to realize light-induced reversible expansion of individual gold nanoplates on optical microfibers. The light-induced thermal expansion coefficient is obtained as 21.4 ± 4.6 ∼ 31.5 ± 4.2 μ·K-1 when the light-induced heating temperature of the gold nanoplates is 240 ∼ 490 °C. The photo-thermo-mechanical response time of the gold nanoplates is about 0.3 ± 0.1 s. This insight into the photo-thermo-mechanical properties of the gold nanoplates could deepen the understanding of the light-induced reversible expansion behavior in nanoscale and pave the way for applications based on this piezoelectric-like response, such as light-driven metallic micromotors.

  15. Light-induced electrohydrodynamic instability in plasmonically absorbing gold nanofluids

    Science.gov (United States)

    Shrestha, Sujan; Dominguez-Juarez, Jorge Luis; Vuong, Luat T.

    2017-06-01

    Plasmonically absorbing nanofluids exhibit light-induced electrokinetics. We measure an electrical response to the light-induced Rayleigh-Bénard-Marangoni convective instabilities in gold-polyvinylpyrrolidone (PVP) nanoparticles (NPs) suspended in isopropanol and water. Microampere current oscillations are measured and attributed to the presence of the Au-PVP NPs with negative zeta potential, in correspondence with the accompanying thermal lens oscillations and a nanofluid thermoelectric effect. The measured electrical oscillations represent an electrohydrodynamic stability driven by light, one among many that should be observed with plasmonic nanoparticles in liquids.

  16. Perl Template Toolkit

    CERN Document Server

    Chamberlain, Darren; Cross, David; Torkington, Nathan; Diaz, tatiana Apandi

    2004-01-01

    Among the many different approaches to "templating" with Perl--such as Embperl, Mason, HTML::Template, and hundreds of other lesser known systems--the Template Toolkit is widely recognized as one of the most versatile. Like other templating systems, the Template Toolkit allows programmers to embed Perl code and custom macros into HTML documents in order to create customized documents on the fly. But unlike the others, the Template Toolkit is as facile at producing HTML as it is at producing XML, PDF, or any other output format. And because it has its own simple templating language, templates

  17. EDITORIAL Light-induced material organization Light-induced material organization

    Science.gov (United States)

    Vainos, Nikos; Rode, Andrei V.

    2010-12-01

    Light-induced material organization extends over a broad area of research, from photon momentum transfer to atoms, molecules and particles, serving the basis for optical trapping, and expands into the laser-induced changes of material properties through photopolymerization, photodarkening, and materials ablation. Relevant phenomena are observed over many orders of magnitude of light intensity, from a few kW cm-2 for the optical trapping of living cells to 1014 W cm-2 encountered in femtosecond laser micromachining and micro-explosion. Relevant interactions reveal a rich palette of novel phenomena in the solid state, from subtle excitations and material organization to phase transformations, non-equilibrium and transient states. The laser-induced material modifications relate to changes in the crystal structure and the molecular bonding, phase transitions in liquid state, ablation and plasma production associated with extreme pressure and temperature conditions towards entirely new states of matter. The underlying physical mechanisms form the foundations for micro-engineering photonic and other functional devices and lead the way to relevant applications. At the same time, they hold the potential for creating non-equilibrium material states and a range of fundamentally new products not available by other means. The fundamental understanding of both materials nature and functional behaviour will ultimately yield novel devices and improved performance in several fields. The far reaching goals of these studies relate to the development of new methods and technologies for micro- and nano-fabrication, not only offering a significant reduction of cost, but also expanding the fabrication capabilities into unexplored areas of biophotonics and nanotechnology. This special issue of Journal of Optics presents some very recent and exciting advances in the field of materials manipulation by laser beams, aiming to underline its current trends. In optical trapping research we

  18. Code Generation with Templates

    CERN Document Server

    Arnoldus, Jeroen; Serebrenik, A

    2012-01-01

    Templates are used to generate all kinds of text, including computer code. The last decade, the use of templates gained a lot of popularity due to the increase of dynamic web applications. Templates are a tool for programmers, and implementations of template engines are most times based on practical experience rather than based on a theoretical background. This book reveals the mathematical background of templates and shows interesting findings for improving the practical use of templates. First, a framework to determine the necessary computational power for the template metalanguage is presen

  19. Light Induced Dissolution of Iron Oxides in the Presence of Siderophores

    Science.gov (United States)

    Kraemer, S. M.; Borer, P.; Sulzberger, B. A.

    2003-12-01

    Iron is a micronutrient that is essential for a range of important enzymatic processes in most organisms. Iron deficiency is thought to be limiting the primary productivity in marine `High Nutrient Low Chlorophyll' (HNLC) regions which has a significant effect on global carbon cycling. Important iron sources in HNLC regions are upwelling and atmospheric dust inputs. However, the iron bioavailability from atmospheric dust is limited by the low solubility and slow dissolution kinetics of iron bearing minerals. Marine bacteria are known to facilitate weathering reactions by exudation of substances such as low molecular weight organic ligands including siderophores. We investigated if siderophore promoted photoreductive dissolution constitutes an important pathway for increasing the bioavailability of iron oxides. We used the microbial siderophores aerobactin and desferrioxamine-B (DFO-B). Aerobactin and desferrixoamines are excreted by marine and terrestrial bacteria. Aerobactin is a dihydroxamate siderophore containing the potentially photoreactive group alpha-hydroxy carboxylate. DFO-B is a trihydroxamate siderophore which forms soluble iron complexes that are not photoreactive (BARBEAU et al., 2003). Despite the structural differences, both siderophores accelerate iron oxide dissolution in irradiated suspensions compared to dissolution rates in the dark. This suggests that both siderophores are not involved in a light induced ligand to metal charge transfer reaction, but rather accelerate other photreductive dissolution mechanisms. Similarly it was observed that both ligands accelerate light induced dissolution of iron oxides in the presence of oxalate as a chromophore. The observations suggest that light induced dissolution of iron oxides in the presence of siderophores is an important pathway for bacterial iron acquisition. However, the formation of Fe(II) by this mechanism may also lead to an increase of the availability of iron to phytoplankton that generally

  20. Broadband light-induced absorbance change in multilayer graphene.

    Science.gov (United States)

    Obraztsov, Petr A; Rybin, Maxim G; Tyurnina, Anastasia V; Garnov, Sergey V; Obraztsova, Elena D; Obraztsov, Alexander N; Svirko, Yuri P

    2011-04-13

    We report the ultrafast light-induced absorbance change in CVD-grown multilayer graphene. Using femtosecond pump-probe measurements in 1100-1800 nm spectral range, we revealed broadband absorbance change when the probe photon energy was higher than that of the pump photon. The observed phenomenon is interpreted in terms of the Auger recombination and impact ionization playing a significant role in the dynamics of photoexcited carriers in graphene.

  1. Isotope Enrichment of Lithium by Light-induced Drift

    OpenAIRE

    武山, 昭憲; 佐藤, 俊一

    2004-01-01

    Isotope enrichment of lithium by light-induced drift (LID) was studied. Lithium atoms collected on a Si substrate was evaluated by SIMS. The separation factor calculated from the SIMS depth profile was 1.02. The diffusion equation describing the distribution of lithium vapor caused by LID was solved numerically. The concentration maps of lithium vapor indicated the isotope ratio was strongly dependent on the position of the Si substrate.

  2. The Molecular Geometric Phase and Light-Induced Conical Intersections

    Science.gov (United States)

    Zak, Emil J.

    2017-06-01

    Potential energy surfaces for electronic states of molecules in strong electromagnetic fields can be described in the dressed-state formalism, which introduces light-induced potentials. A light-induced conical intersection (LICI) [1] appears when two electronic states intersect due to the presence of an external electric field and when the dipole coupling between the field and the molecule vanishes. There are several aspects of quantum dynamics near LICIs, which still require a thorough investigation. How do non-adiabatic effects manifest themselves in polyatomic molecules in strong electromagnetic fields? Are the natural conical-intersections (NCI) and the light-induced conical intersections identical in nature? Do topological effects (Berry phase) [2] influence the nuclear dynamics around NCIs and LICIs? To answer these questions, a computer code for time-propagation of the ro-vibronic wavefunction on multiple coupled potential energy surfaces has been developed. The time-independent zero-order basis is taken from the DUO suite [3], which solves the full ro-vibronic Schrödinger equation for diatomic molecules. Non-adiabatic nuclear dynamics near LICIs will be presented on the examples of NaH and CaF molecules, with a perspective for extension to polyatomics. G. J. Halász, A Vibók, M. Sindelka, N. Moiseyev, L. S. Cederbaum, 2011 J. Phys. B: At. Mol. Opt. Phys. 44 175102 C. Wittig, Phys. Chem. Chem. Phys., 2012, 14, 6409-6432 S. N. Yurchenko, L. Lodi, J. Tennyson, A. V. Stolyarov, Comput. Phys. Commun., 202, 262, 2016

  3. Light-induced metastable structural changes in hydrogenated amorphous silicon

    Energy Technology Data Exchange (ETDEWEB)

    Fritzsche, H. [Univ. of Chicago, IL (United States)

    1996-09-01

    Light-induced defects (LID) in hydrogenated amorphous silicon (a-Si:H) and its alloys limit the ultimate efficiency of solar panels made with these materials. This paper reviews a variety of attempts to find the origin of and to eliminate the processes that give rise to LIDs. These attempts include novel deposition processes and the reduction of impurities. Material improvements achieved over the past decade are associated more with the material`s microstructure than with eliminating LIDs. We conclude that metastable LIDs are a natural by-product of structural changes which are generally associated with non-radiative electron-hole recombination in amorphous semiconductors.

  4. Transient light-induced intracellular oxidation revealed by redox biosensor

    Energy Technology Data Exchange (ETDEWEB)

    Kolossov, Vladimir L., E-mail: viadimer@illinois.edu [Institute for Genomic Biology, University of Illinois at Urbana-Champaign, 1206 W. Gregory Drive, Urbana, IL 61801 (United States); Beaudoin, Jessica N. [Institute for Genomic Biology, University of Illinois at Urbana-Champaign, 1206 W. Gregory Drive, Urbana, IL 61801 (United States); Department of Animal Sciences, University of Illinois at Urbana-Champaign, 1207 W. Gregory Drive, Urbana, IL 61801 (United States); Hanafin, William P. [Institute for Genomic Biology, University of Illinois at Urbana-Champaign, 1206 W. Gregory Drive, Urbana, IL 61801 (United States); DiLiberto, Stephen J. [Institute for Genomic Biology, University of Illinois at Urbana-Champaign, 1206 W. Gregory Drive, Urbana, IL 61801 (United States); Department of Animal Sciences, University of Illinois at Urbana-Champaign, 1207 W. Gregory Drive, Urbana, IL 61801 (United States); Kenis, Paul J.A. [Institute for Genomic Biology, University of Illinois at Urbana-Champaign, 1206 W. Gregory Drive, Urbana, IL 61801 (United States); Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Avenue, Urbana, IL 61801 (United States); Rex Gaskins, H. [Institute for Genomic Biology, University of Illinois at Urbana-Champaign, 1206 W. Gregory Drive, Urbana, IL 61801 (United States); Department of Animal Sciences, University of Illinois at Urbana-Champaign, 1207 W. Gregory Drive, Urbana, IL 61801 (United States); Department of Pathobiology, University of Illinois at Urbana-Champaign, 2001 S. Lincoln Avenue, Urbana, IL 61801 (United States); Division of Nutritional Sciences, University of Illinois at Urbana-Champaign, 905 S. Goodwin Avenue, Urbana, IL 61801 (United States)

    2013-10-04

    Highlights: •Time-resolved live cell imaging revealed light-induced oxidation. •Only the roGFP probe fused with glutaredoxin reveals photooxidation. •The transient oxidation is rapidly reduced by the cytosolic antioxidant system. •Intracellular photooxidation is media-dependent. •Oxidation is triggered exclusively by exposure to short wavelength excitation. -- Abstract: We have implemented a ratiometric, genetically encoded redox-sensitive green fluorescent protein fused to human glutaredoxin (Grx1-roGFP2) to monitor real time intracellular glutathione redox potentials of mammalian cells. This probe enabled detection of media-dependent oxidation of the cytosol triggered by short wavelength excitation. The transient nature of light-induced oxidation was revealed by time-lapse live cell imaging when time intervals of less than 30 s were implemented. In contrast, transient ROS generation was not observed with the parental roGFP2 probe without Grx1, which exhibits slower thiol-disulfide exchange. These data demonstrate that the enhanced sensitivity of the Grx1-roGFP2 fusion protein enables the detection of short-lived ROS in living cells. The superior sensitivity of Grx1-roGFP2, however, also enhances responsiveness to environmental cues introducing a greater likelihood of false positive results during image acquisition.

  5. Light-Induced Switching of Tunable Single-Molecule Junctions

    KAUST Repository

    Sendler, Torsten

    2015-04-16

    A major goal of molecular electronics is the development and implementation of devices such as single-molecular switches. Here, measurements are presented that show the controlled in situ switching of diarylethene molecules from their nonconductive to conductive state in contact to gold nanoelectrodes via controlled light irradiation. Both the conductance and the quantum yield for switching of these molecules are within a range making the molecules suitable for actual devices. The conductance of the molecular junctions in the opened and closed states is characterized and the molecular level E 0, which dominates the current transport in the closed state, and its level broadening Γ are identified. The obtained results show a clear light-induced ring forming isomerization of the single-molecule junctions. Electron withdrawing side-groups lead to a reduction of conductance, but do not influence the efficiency of the switching mechanism. Quantum chemical calculations of the light-induced switching processes correlate these observations with the fundamentally different low-lying electronic states of the opened and closed forms and their comparably small modification by electron-withdrawing substituents. This full characterization of a molecular switch operated in a molecular junction is an important step toward the development of real molecular electronics devices.

  6. Functional analysis of chloroplast early light inducible proteins (ELIPs)

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, Carolyn M

    2005-02-22

    The objectives of this project were to characterize gene expression patterns of early light inducible protein (ELIP) genes in Arabidopsis thaliana and in Lycopersicon esculentum, to identify knock mutants of the 2 ELIP genes in Arabidopsis, and to characterize the effects of the knockouts. Expression in Arabidopsis was studied in response to thylakoid electron transport chain (PETC) capacity, where it was found that there is a signal for expression associated with reduction of the PETC. Expression in response to salt was also studied, with different responses of the two gene copies. Knockout lines for ELIP1 and ELIP2 have been identified and are being characterized. In tomato, it was found that the single-copy ELIP gene is highly expressed in ripening fruit during the chloroplast-to-chromoplast transition. Studies of expression in tomato ripening mutants are ongoing.

  7. Polymer-Fullerene Network Formation via Light-Induced Crosslinking.

    Science.gov (United States)

    Sugawara, Yuuki; Hiltebrandt, Kai; Blasco, Eva; Barner-Kowollik, Christopher

    2016-09-01

    A facile and efficient methodology for the formation of polymer-fullerene networks via a light-induced reaction is reported. The photochemical crosslinking is based on a nitrile imine-mediated tetrazole-ene cycloaddition reaction, which proceeds catalyst-free under UV-light irradiation (λmax = 320 nm) at ambient temperature. A tetrazole-functionalized polymer (Mn = 6500 g mol(-1) , Ð = 1.3) and fullerene C60 are employed for the formation of the hybrid networks. The tetrazole-functionalized polymer as well as the fullerene-containing networks are carefully characterized by NMR spectrometry, size exclusion chromatography, infrared spectroscopy, and elemental analysis. Furthermore, thermal analysis of the fullerene networks and their precursors is carried out. The current contribution thus induces an efficient platform technology for fullerene-based network formation. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Light-induced structural changes in a monomeric bacteriophytochrome.

    Science.gov (United States)

    Takala, Heikki; Niebling, Stephan; Berntsson, Oskar; Björling, Alexander; Lehtivuori, Heli; Häkkänen, Heikki; Panman, Matthijs; Gustavsson, Emil; Hoernke, Maria; Newby, Gemma; Zontone, Federico; Wulff, Michael; Menzel, Andreas; Ihalainen, Janne A; Westenhoff, Sebastian

    2016-09-01

    Phytochromes sense red light in plants and various microorganism. Light absorption causes structural changes within the protein, which alter its biochemical activity. Bacterial phytochromes are dimeric proteins, but the functional relevance of this arrangement remains unclear. Here, we use time-resolved X-ray scattering to reveal the solution structural change of a monomeric variant of the photosensory core module of the phytochrome from Deinococcus radiodurans. The data reveal two motions, a bend and a twist of the PHY domain with respect to the chromophore-binding domains. Infrared spectroscopy shows the refolding of the PHY tongue. We conclude that a monomer of the phytochrome photosensory core is sufficient to perform the light-induced structural changes. This implies that allosteric cooperation with the other monomer is not needed for structural activation. The dimeric arrangement may instead be intrinsic to the biochemical output domains of bacterial phytochromes.

  9. Light-induced performance increase of silicon heterojunction solar cells

    KAUST Repository

    Kobayashi, Eiji

    2016-10-11

    Silicon heterojunction solar cells consist of crystalline silicon (c-Si) wafers coated with doped/intrinsic hydrogenated amorphous silicon (a-Si:H) bilayers for passivating-contact formation. Here, we unambiguously demonstrate that carrier injection either due to light soaking or (dark) forward-voltage bias increases the open circuit voltage and fill factor of finished cells, leading to a conversion efficiency gain of up to 0.3% absolute. This phenomenon contrasts markedly with the light-induced degradation known for thin-film a-Si:H solar cells. We associate our performance gain with an increase in surface passivation, which we find is specific to doped a-Si:H/c-Si structures. Our experiments suggest that this improvement originates from a reduced density of recombination-active interface states. To understand the time dependence of the observed phenomena, a kinetic model is presented.

  10. Light-induced bird strikes on vessels in Southwest Greenland

    DEFF Research Database (Denmark)

    Merkel, Flemming Ravn; Johansen, Kasper Lambert

    2011-01-01

    Light-induced bird strikes are known to occur when vessels navigate during darkness in icy waters using powerful searchlight. In Southwest Greenland, which is important internationally for wintering seabirds, we collected reports of incidents of bird strikes over 2–3 winters (2006–2009) from navy...... vessels, cargo vessels and trawlers (total n = 19). Forty-one incidents were reported: mainly close to land (birds were reported killed in a single incident. All occurred between 5 p.m. and 6 a.m. and significantly more birds were involved when...... visibility was poor (snow) rather than moderate or good. Among five seabird species reported, the common eider (Somateria mollissima) accounted for 95% of the bird casualties. Based on spatial analyses of data on vessel traffic intensity and common eider density we are able to predict areas with high risk...

  11. Light-induced structural changes in a monomeric bacteriophytochrome

    Directory of Open Access Journals (Sweden)

    Heikki Takala

    2016-09-01

    Full Text Available Phytochromes sense red light in plants and various microorganism. Light absorption causes structural changes within the protein, which alter its biochemical activity. Bacterial phytochromes are dimeric proteins, but the functional relevance of this arrangement remains unclear. Here, we use time-resolved X-ray scattering to reveal the solution structural change of a monomeric variant of the photosensory core module of the phytochrome from Deinococcus radiodurans. The data reveal two motions, a bend and a twist of the PHY domain with respect to the chromophore-binding domains. Infrared spectroscopy shows the refolding of the PHY tongue. We conclude that a monomer of the phytochrome photosensory core is sufficient to perform the light-induced structural changes. This implies that allosteric cooperation with the other monomer is not needed for structural activation. The dimeric arrangement may instead be intrinsic to the biochemical output domains of bacterial phytochromes.

  12. DTM: Deformable Template Matching

    OpenAIRE

    Lee, Hyungtae; Kwon, Heesung; Robinson, Ryan M.; Nothwang, William D.

    2016-01-01

    A novel template matching algorithm that can incorporate the concept of deformable parts, is presented in this paper. Unlike the deformable part model (DPM) employed in object recognition, the proposed template-matching approach called Deformable Template Matching (DTM) does not require a training step. Instead, deformation is achieved by a set of predefined basic rules (e.g. the left sub-patch cannot pass across the right patch). Experimental evaluation of this new method using the PASCAL VO...

  13. Action Spectrum of Light-Induced Membrane Hyperpolarization in Egeria densa

    OpenAIRE

    Masashi, Tazawa; Teruo, Shimmen; Tetsuro, Mimura; Department of Biology, Faculty of Science, Tokyo Metropolitan University

    1986-01-01

    Action spectra of light-induced membrane hyperpolarization and photosynthetic oxygen evolution were determined in cells of Egeria densa. Since both spectra were similar, photosynthetic pigments are assumed to be involved in the light-induced membrane hyperpolarization. However, the saturation levels of light fluencies differed greatly between the two light reactions. Light-induced hyperpolarization reached the maximum level at a light fluence less than one-tenth that needed for saturation of ...

  14. A green-light inducible lytic system for cyanobacterial cells.

    Science.gov (United States)

    Miyake, Kotone; Abe, Koichi; Ferri, Stefano; Nakajima, Mitsuharu; Nakamura, Mayumi; Yoshida, Wataru; Kojima, Katsuhiro; Ikebukuro, Kazunori; Sode, Koji

    2014-01-01

    Cyanobacteria are an attractive candidate for the production of biofuel because of their ability to capture carbon dioxide by photosynthesis and grow on non-arable land. However, because huge quantities of water are required for cultivation, strict water management is one of the greatest issues in algae- and cyanobacteria-based biofuel production. In this study, we aim to construct a lytic cyanobacterium that can be regulated by a physical signal (green-light illumination) for future use in the recovery of biofuel related compounds. We introduced T4 bacteriophage-derived lysis genes encoding holin and endolysin under the control of the green-light regulated cpcG2 promoter in Synechocystis sp. PCC 6803. When cells harboring the lysis genes were illuminated with both red and green light, we observed a considerable decrease in growth rate, a significant increase in cellular phycocyanin released in the medium, and a considerable fraction of dead cells. These effects were not observed when these cells were illuminated with only red light, or when cells not containing the lysis genes were grown under either red light or red and green light. These results indicate that our constructed green-light inducible lytic system was clearly induced by green-light illumination, resulting in lytic cells that released intracellular phycocyanin into the culture supernatant. This property suggests a future possibility to construct photosynthetic genetically modified organisms that are unable to survive under sunlight exposure. Expression of the self-lysis system with green-light illumination was also found to greatly increase the fragility of the cell membrane, as determined by subjecting the induced cells to detergent, osmotic-shock, and freeze-thaw treatments. A green-light inducible lytic system was constructed in Synechocystis sp. PCC 6803. The engineered lytic cyanobacterial cells should be beneficial for the recovery of biofuels and related compounds from cells with minimal effort

  15. Accelerated light-induced degradation for detecting copper contamination in p-type silicon

    Energy Technology Data Exchange (ETDEWEB)

    Inglese, Alessandro, E-mail: alessandro.inglese@aalto.fi; Savin, Hele [Department of Micro- and Nanosciences, Aalto University, Tietotie 3, 02150 Espoo (Finland); Lindroos, Jeanette [Department of Micro- and Nanosciences, Aalto University, Tietotie 3, 02150 Espoo (Finland); Department of Engineering and Physics, Karlstad University, Universitetsg. 2, 65188 Karlstad (Sweden)

    2015-08-03

    Copper is a harmful metal impurity that significantly impacts the performance of silicon-based devices if present in active regions. In this contribution, we propose a fast method consisting of simultaneous illumination and annealing for the detection of copper contamination in p-type silicon. Our results show that, within minutes, such method is capable of producing a significant reduction of the minority carrier lifetime. A spatial distribution map of copper contamination can then be obtained through the lifetime values measured before and after degradation. In order to separate the effect of the light-activated copper defects from the other metastable complexes in low resistivity Cz-silicon, we carried out a dark anneal at 200 °C, which is known to fully recover the boron-oxygen defect. Similar to the boron-oxygen behavior, we show that the dark anneal also recovers the copper defects. However, the recovery is only partial and it can be used to identify the possible presence of copper contamination.

  16. Light-induced protein nitration and degradation with HONO emission

    Science.gov (United States)

    Meusel, Hannah; Elshorbany, Yasin; Kuhn, Uwe; Bartels-Rausch, Thorsten; Reinmuth-Selzle, Kathrin; Kampf, Christopher J.; Li, Guo; Wang, Xiaoxiang; Lelieveld, Jos; Pöschl, Ulrich; Hoffmann, Thorsten; Su, Hang; Ammann, Markus; Cheng, Yafang

    2017-10-01

    Proteins can be nitrated by air pollutants (NO2), enhancing their allergenic potential. This work provides insight into protein nitration and subsequent decomposition in the presence of solar radiation. We also investigated light-induced formation of nitrous acid (HONO) from protein surfaces that were nitrated either online with instantaneous gas-phase exposure to NO2 or offline by an efficient nitration agent (tetranitromethane, TNM). Bovine serum albumin (BSA) and ovalbumin (OVA) were used as model substances for proteins. Nitration degrees of about 1 % were derived applying NO2 concentrations of 100 ppb under VIS/UV illuminated conditions, while simultaneous decomposition of (nitrated) proteins was also found during long-term (20 h) irradiation exposure. Measurements of gas exchange on TNM-nitrated proteins revealed that HONO can be formed and released even without contribution of instantaneous heterogeneous NO2 conversion. NO2 exposure was found to increase HONO emissions substantially. In particular, a strong dependence of HONO emissions on light intensity, relative humidity, NO2 concentrations and the applied coating thickness was found. The 20 h long-term studies revealed sustained HONO formation, even when concentrations of the intact (nitrated) proteins were too low to be detected after the gas exchange measurements. A reaction mechanism for the NO2 conversion based on the Langmuir-Hinshelwood kinetics is proposed.

  17. A light-induced shortcut in the planktonic microbial loop

    KAUST Repository

    Ptacnik, Robert

    2016-07-11

    Mixotrophs combine photosynthesis with phagotrophy to cover their demands in energy and essential nutrients. This gives them a competitive advantage under oligotropihc conditions, where nutrients and bacteria concentrations are low. As the advantage for the mixotroph depends on light, the competition between mixo- and heterotrophic bacterivores should be regulated by light. To test this hypothesis, we incubated natural plankton from the ultra-oligotrophic Eastern Mediterranean in a set of mesocosms maintained at 4 light levels spanning a 10-fold light gradient. Picoplankton (heterotrophic bacteria (HB), pico-sized cyanobacteria, and small-sized flagellates) showed the fastest and most marked response to light, with pronounced predator-prey cycles, in the high-light treatments. Albeit cell specific activity of heterotrophic bacteria was constant across the light gradient, bacterial abundances exhibited an inverse relationship with light. This pattern was explained by light-induced top-down control of HB by bacterivorous phototrophic eukaryotes (PE), which was evidenced by a significant inverse relationship between HB net growth rate and PE abundances. Our results show that light mediates the impact of mixotrophic bacterivores. As mixo- and heterotrophs differ in the way they remineralize nutrients, these results have far-reaching implications for how nutrient cycling is affected by light.

  18. S-template

    Directory of Open Access Journals (Sweden)

    Jitendra Bhagchandani

    2014-01-01

    Full Text Available Recently introduced Yen angle and W angle suggest the use of center of premaxilla (M and mandibular symphysis (G as landmarks for assessing sagittal jaw base discrepancies. These landmarks have been considered to be more stable than traditionally used points A and B. This article is an attempt to develop a simple tool that will enable the clinician to identify the centers of premaxilla and mandibular symphysis and hence the name Simplified template, i.e., S-template. This tool would aid the orthodontist in locating the centroids of maxilla and mandibular symphysis more easily and accurately than prefabricated templates.

  19. Light-induced nonadiabatic dynamics in molecular assemblies and nanostructures

    Science.gov (United States)

    Mitric, Roland

    The combination of mixed quantum-classical dynamics with efficient electronic structure methods was developed in order to simulate the light-induced processes in complex molecules, multichromophoric aggregates and metallic nanostructures. We will demonstrate how the combination of nonadiabatic dynamics with experimental pump-probe techniques such as time-resolved photoelectron imaging (TRPEI) allows to fully resolve the mechanism of excited state relaxation through conical intersections in several prototype organic- and biomolecules. Specifically, the role of the solvent in the excited state relaxation in microsolvated and fully solvated systems will be addressed. Currently there is growing evidence that nonadiabatic relaxation processes also play a fundamental role in determining the efficiency of excitonic transfer or charge injection in multichromophoric assemblies. Since such systems are currently out of the reach of the state-of-the-art quantum chemistry a development of even more efficient quantum chemical approaches is necessary in order to describe the excited state dynamics in such assemblies. For this purpose we have recently developed long-range corrected time-dependent density functional tight binding (LC-TDDFTB) nonadiabatic dynamics and combined it with the QM/MM approach in order to simulate exciton relaxation in complex systems. The applications of the method to the investigation of the optical properties and dynamics in multichromophoric assemblies including stacked pi-conjugated organic chromophores, model molecular crystals as well as self-organized dye aggregates will be presented. Finally, we will address exciton transport dynamics coupled with the light propagation in hybrid exciton-plasmon nanostructures, which represent promising materials fort the development of novel light-harvesting systems.

  20. A fast template periodogram

    Directory of Open Access Journals (Sweden)

    Hoffman John

    2017-01-01

    Full Text Available This proceedings contribution presents a novel, non-linear extension to the Lomb-Scargle periodogram that allows periodograms to be generated for arbitrary signal shapes. Such periodograms are already known as “template periodograms” or “periodic matched filters,” but current implementations are computationally inefficient. The “fast template periodogram” presented here improves existing techniques by a factor of ∼a few for small test cases (O(10 observations, and over three orders of magnitude for lightcurves containing O(104 observations. The fast template periodogram scales asymptotically as O(HNf log HNf + H4Nf, where H denotes the number of harmonics required to adequately approximate the template and Nf is the number of trial frequencies. Existing implementations scale as O(NobsNf, where Nobs is the number of observations in the lightcurve. An open source Python implementation is available on GitHub.

  1. A fast template periodogram

    Science.gov (United States)

    Hoffman, John; VanderPlas, Jake; Hartman, Joel; Bakos, Gáspár

    2017-09-01

    This proceedings contribution presents a novel, non-linear extension to the Lomb-Scargle periodogram that allows periodograms to be generated for arbitrary signal shapes. Such periodograms are already known as "template periodograms" or "periodic matched filters," but current implementations are computationally inefficient. The "fast template periodogram" presented here improves existing techniques by a factor of ˜a few for small test cases (O(10) observations), and over three orders of magnitude for lightcurves containing O(104) observations. The fast template periodogram scales asymptotically as O(HNf log HNf + H4Nf), where H denotes the number of harmonics required to adequately approximate the template and Nf is the number of trial frequencies. Existing implementations scale as O(NobsNf), where Nobs is the number of observations in the lightcurve. An open source Python implementation is available on GitHub.

  2. Biometric Template Security

    Directory of Open Access Journals (Sweden)

    Abhishek Nagar

    2008-03-01

    Full Text Available Biometric recognition offers a reliable solution to the problem of user authentication in identity management systems. With the widespread deployment of biometric systems in various applications, there are increasing concerns about the security and privacy of biometric technology. Public acceptance of biometrics technology will depend on the ability of system designers to demonstrate that these systems are robust, have low error rates, and are tamper proof. We present a high-level categorization of the various vulnerabilities of a biometric system and discuss countermeasures that have been proposed to address these vulnerabilities. In particular, we focus on biometric template security which is an important issue because, unlike passwords and tokens, compromised biometric templates cannot be revoked and reissued. Protecting the template is a challenging task due to intrauser variability in the acquired biometric traits. We present an overview of various biometric template protection schemes and discuss their advantages and limitations in terms of security, revocability, and impact on matching accuracy. A template protection scheme with provable security and acceptable recognition performance has thus far remained elusive. Development of such a scheme is crucial as biometric systems are beginning to proliferate into the core physical and information infrastructure of our society.

  3. Light-Induced Structures in Attosecond Transient Absorption Spectroscopy of Molecules

    CERN Document Server

    Bækhøj, Jens E

    2015-01-01

    The nature of light-induced structures in attosecond transient absorption spectroscopy of molecular systems is investigated theoretically. It is shown how nuclear dynamics affect these structures. We find that a theoretical three-surface model captures the main characteristics in the calculated spectra. Based on this model, nuclear dynamics is divided into different categories, each category having unique signatures in the absorption spectra. Finally, we discuss the possibility for experimental observation of light-induced structures in molecules.

  4. Joomla! 3 template essentials

    CERN Document Server

    Frankowski, Pawel

    2013-01-01

    Using this hands-on, step-by step tutorial filled with practical examples, the readers will be able to create beautiful templates and themes for your websites that will make them stand out from others.This book is written for all of you who wish to create your own unique templates for Joomla! 3.x. This book can be used by Joomla! administrators or visual designers (with no programming experience) or those of you who are used to working with common web developer tools like HTML/CSS editors for coding purposes. You would need basic knowledge of Joomla! and some knowledge of CSS and HTML.

  5. The Involvement of the Oxidative Stress in Murine Blue LED Light-Induced Retinal Damage Model.

    Science.gov (United States)

    Nakamura, Maho; Kuse, Yoshiki; Tsuruma, Kazuhiro; Shimazawa, Masamitsu; Hara, Hideaki

    2017-01-01

    The aim of study was to establish a mouse model of blue light emitting diode (LED) light-induced retinal damage and to evaluate the effects of the antioxidant N-acetylcysteine (NAC). Mice were exposed to 400 or 800 lx blue LED light for 2 h, and were evaluated for retinal damage 5 d later by electroretinogram amplitude and outer nuclear layer (ONL) thickness. Additionally, we investigated the effect of blue LED light exposure on shorts-wave-sensitive opsin (S-opsin), and rhodopsin expression by immunohistochemistry. Blue LED light induced light intensity dependent retinal damage and led to collapse of S-opsin and altered rhodopsin localization from inner and outer segments to ONL. Conversely, NAC administered at 100 or 250 mg/kg intraperitoneally twice a day, before dark adaptation and before light exposure. NAC protected the blue LED light-induced retinal damage in a dose-dependent manner. Further, blue LED light-induced decreasing of S-opsin levels and altered rhodopsin localization, which were suppressed by NAC. We established a mouse model of blue LED light-induced retinal damage and these findings indicated that oxidative stress was partially involved in blue LED light-induced retinal damage.

  6. Longwave UV light induces the aging-associated progerin.

    Science.gov (United States)

    Takeuchi, Hirotaka; Rünger, Thomas M

    2013-07-01

    Premature aging in Hutchinson-Gilford progeria syndrome (HGPS) is caused by a mutation of the LMNA gene that activates a cryptic splice site. This results in expression of a truncated form of Lamin A, called progerin. Accumulation of progerin in the nuclei of HGPS cells impairs nuclear functions and causes abnormal nuclear morphology. Progerin accumulation has not only been described in HGPS, but also during normal intrinsic aging. We hypothesized that accumulation of progerin with abnormal nuclear shapes may also be accelerated by UV and with that contribute to photoaging of the skin. We exposed neonatal or aged cultured fibroblasts to single or repeated doses of longwave or shortwave UV (UVA or UVB) and found that UVA, but not UVB, induces progerin expression and HGPS-like abnormal nuclear shapes in all cells, but more in aged cells. The induction of progerin is mediated by UVA-induced oxidative damage and subsequent alternative splicing of the LMNA transcript, as progerin induction was suppressed by the singlet oxygen quencher sodium azide, and as mRNA expression of LMNA was not induced by UVA. These data suggest a previously unreported pathway of photoaging and support the concept that photoaging is at least in part a process of damage-accelerated intrinsic aging.

  7. Computing layouts with deformable templates

    KAUST Repository

    Peng, Chihan

    2014-07-27

    In this paper, we tackle the problem of tiling a domain with a set of deformable templates. A valid solution to this problem completely covers the domain with templates such that the templates do not overlap. We generalize existing specialized solutions and formulate a general layout problem by modeling important constraints and admissible template deformations. Our main idea is to break the layout algorithm into two steps: a discrete step to lay out the approximate template positions and a continuous step to refine the template shapes. Our approach is suitable for a large class of applications, including floorplans, urban layouts, and arts and design. Copyright © ACM.

  8. Template Composite Dark Matter

    DEFF Research Database (Denmark)

    Drach, Vincent; Hietanen, Ari; Pica, Claudio

    2015-01-01

    We present a non perturbative study of SU(2) gauge theory with two fundamental Dirac flavours. We discuss how the model can be used as a template for composite Dark Matter (DM). We estimate one particular interaction of the DM candidate with the Standard Model : the interaction through photon...

  9. The Cadastral Template Project

    DEFF Research Database (Denmark)

    Enemark, Stig; Steudler, Daniel; Williamson, Ian P.

    2004-01-01

      While many country reports have been compiled in the area of land administration over the last decade, there has not much attention been given to the basic cadastral issues. As a result, one of the objectives of Working Group 3 ?Cadastre? of the PCGIAP is the establishment of a cadastral template...

  10. Introducing Dunaliella LIP promoter containing light-inducible motifs improves transgenic expression in Chlamydomonas reinhardtii.

    Science.gov (United States)

    Baek, Kwangryul; Lee, Yew; Nam, Onyou; Park, Seunghye; Sim, Sang Jun; Jin, EonSeon

    2016-03-01

    Promoter of the light-inducible protein gene (LIP) of Dunaliella was recently isolated in our laboratory. The aim of this work is to find the light-inducible motif in the Dunaliella LIP promoter and verify its regulatory motif with a Gaussia luciferase reporter gene transformed in Chlamydomonas reinhardtii. 400 bp upstream to the translational start site of the Dunaliella LIP gene was gradually truncated and analyzed for the luciferase expression. Furthermore, this promoter comprising duplicated or triplicated light-responsive motifs was tested for its augmentation of light response. Two putative light-responsive motifs, GT-1 binding motif and sequences over-represented in light-repressed promoters (SORLIP) located in the 200 bp LIP promoter fragment were analyzed for their light responsibility. It is turned out that SORLIP was responsible for the light-inducible activity. With the copy number of SORLIP up to three showed stronger high light response compared with the native LIP promoter fragment. Therefore, we found a light-responsive DNA motif operating in Chlamydomonas and confirm a synthetic promoter including this motif displayed light inducibility in heterologously transformed green algae for the first time. This light-inducible expression system will be applied to various area of algal research including algal biotechnology. Copyright © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. NLG vs. Templates

    CERN Document Server

    Reiter, E R

    1995-01-01

    One of the most important questions in applied NLG is what benefits (or `value-added', in business-speak) NLG technology offers over template-based approaches. Despite the importance of this question to the applied NLG community, however, it has not been discussed much in the research NLG community, which I think is a pity. In this paper, I try to summarize the issues involved and recap current thinking on this topic. My goal is not to answer this question (I don't think we know enough to be able to do so), but rather to increase the visibility of this issue in the research community, in the hope of getting some input and ideas on this very important question. I conclude with a list of specific research areas I would like to see more work in, because I think they would increase the `value-added' of NLG over templates.

  12. Templating mesoporous zeolites

    DEFF Research Database (Denmark)

    Egeblad, Kresten; Christensen, Christina Hviid; Kustova, Marina

    2008-01-01

    phase. It is shown that the available templating approaches are quite versatile, and accordingly, it is possible to produce a very wide range of hierarchical zeolite materials. The resulting zeolite materials, featuring noncrystallographic mesopores in addition to the crystallographic micropores......, exhibit significantly enhanced diffusional properties in comparison with purely microporous zeolite materials. These enhanced mass transport properties have been shown in several cases to result in significantly improved catalytic properties in a range of important reactions....

  13. Visible Light Induced Organic Transformations Using Metal-Organic-Frameworks (MOFs).

    Science.gov (United States)

    Deng, Xiaoyu; Li, Zhaohui; García, Hermenegildo

    2017-08-22

    With the aim of developing renewable energy based processes, researchers are paying increasing interest to light induced organic transformations. Metal-organic frameworks (MOFs), a class of micro-/mesoporous hybrid materials, are recently emerging as a new type of photoactive materials for organic syntheses due to their unique structural characteristics. In this Review, we summarized the recent applications of MOFs as photocatalysts for light induced organic transformations, including (1) oxidation of alcohols, amines, alkene, alkanes and sulfides; (2) hydroxylation of aromatic compounds like benzene; (3) activation of the C-H bonds to construct new C-C or C-X bonds; (4) atom-transfer radical polymerization (ATRP). This Review starts with general background information of using MOFs in photocatalysis, followed by a description of light induced organic transformations promoted by photoactive inorganic nodes and photocatalytic active ligands in MOFs, respectively. Thereafter, the use of MOFs as multifunctional catalysts for light induced organic transformations via an efficient merge of the metal/ligand/guest based catalysis where the photocatalytic activity of MOFs plays a key role are discussed. Finally, the limitations, challenges and the future perspective of the application of MOFs for light induced organic transformations were addressed. The objective of this Review is to serve as a starting point for other researchers to get into this largely unexplored field. It is also our goal to stimulate intensive research in this field for rational designing of MOF materials to overcome their current limitations in photocatalysis, which can lead to more creative visible-light-induced organic transformations. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. A Novel Approach Based on PCNNs Template for Fingerprint Image Thinning

    NARCIS (Netherlands)

    Dacheng, X.; Bailiang, L.; Nijholt, Antinus; Kacprzyk, J.

    2009-01-01

    A PCNNs-based square-and-triangle-template method for binary fingerprint image thinning is proposed. The algorithm is iterative, in which a combined sequential and parallel processing is employed to accelerate execution. When a neuron satisfies the square template, the pixel corresponding to this

  15. MYB75 phosphorylation by MPK4 is required for light-induced anthocyanin accumulation in arabidopsis

    DEFF Research Database (Denmark)

    Li, Shengnan; Wang, Wenyi; Gao, Jinlan

    2016-01-01

    anthocyanin pigments is light dependent, and the R2R3 MYB transcription factor MYB75/PAP1 regulates anthocyanin accumulation. Here, we report that MYB75 interacts with and is phosphorylated by MAP KINASE4 (MPK4). Their interaction is dependent on MPK4 kinase activity and is required for full function of MYB75....... MPK4 can be activated in response to light and is involved in the light-induced accumulation of anthocyanins. We show that MPK4 phosphorylation of MYB75 increases its stability and is essential for light-induced anthocyanin accumulation. Our findings reveal an important role for a MAPK pathway...

  16. Studies of photoinduced charge transfer in conjugated polymer-fullerene composites by light-induced ESR

    NARCIS (Netherlands)

    Dyakonov, V.; Zoriniants, G.; Scharber, M.; Brabec, C.J.; Janssen, R.A.J.; Hummelen, J.C.; Sariciftci, N.S.

    1998-01-01

    In this work we present comparative studies of the photoinduced electron transfer (PIT) in a number of conjugated polymer/fullerene composites and in pure components by using light-induced electron spin resonance. PIT from the polymer onto fullerene in the composites results in the appearance of two

  17. Classification of quantitative light-induced fluorescence images using convolutional neural network

    NARCIS (Netherlands)

    Imangaliyev, S.; van der Veen, M.H.; Volgenant, C.M.C.; Loos, B.G.; Keijser, B.J.F.; Crielaard, W.; Levin, E.; Lintas, A.; Rovetta, S.; Verschure, P.F.M.J.; Villa, A.E.P.

    2017-01-01

    Images are an important data source for diagnosis of oral diseases. The manual classification of images may lead to suboptimal treatment procedures due to subjective errors. In this paper an image classification algorithm based on Deep Learning framework is applied to Quantitative Light-induced

  18. In situ transmission electron microscopy of light-induced photocatalytic reactions

    DEFF Research Database (Denmark)

    Cavalca, Filippo; Laursen, Anders Bo; Kardynal, Beata

    2012-01-01

    TEM analysis of photocatalysts with environmental TEM (ETEM) and photoactivation using light. Two novel types of TEM specimen holder that enable in situ illumination are developed to study light-induced phenomena in photoactive materials, systems and photocatalysts at the nanoscale under working...

  19. RECEPTOR POTENTIAL AND LIGHT-INDUCED MITOCHONDRIAL ACTIVATION IN BLOWFLY PHOTORECEPTOR MUTANTS

    NARCIS (Netherlands)

    MOJET, MH; TINBERGEN, J; STAVENGA, DG

    1991-01-01

    1. Simultaneous measurements of the receptor potential and the light-induced mitochondrial activation were performed in white-eyed blowflies Calliphora vicina, mutant chalky, and Lucilia cuprina, mutants w(F) and w'nss. The intensity dependence and the temporal dynamics were investigated. 2. The

  20. Early-time photodynamics of ruthenium-based photocatalysts for light-induced hydrogen generation

    NARCIS (Netherlands)

    Pan, Qing

    2016-01-01

    This thesis aims to provide a fundamental understanding of the early-time photodynamics of a series of Ru/M (M = Pd or Pt) bimetallic photocatalysts for light-induced hydrogen generation. This class of complexes adopts a general structure involving a Ru(II) center coordinated to two peripheral

  1. A Deformable Template Model, with Special Reference to Elliptical Templates

    DEFF Research Database (Denmark)

    Hobolth, Asger; Pedersen, Jan; Jensen, Eva Bjørn Vedel

    2002-01-01

    This paper suggests a high-level continuous image model for planar star-shaped objects. Under this model, a planar object is a stochastic deformation of a star-shaped template. The residual process, describing the difference between the radius-vector function of the template and the object...

  2. Eliminating Light-Induced Degradation in Commercial p-Type Czochralski Silicon Solar Cells

    Directory of Open Access Journals (Sweden)

    Brett Hallam

    2017-12-01

    Full Text Available This paper discusses developments in the mitigation of light-induced degradation caused by boron-oxygen defects in boron-doped Czochralski grown silicon. Particular attention is paid to the fabrication of industrial silicon solar cells with treatments for sensitive materials using illuminated annealing. It highlights the importance and desirability of using hydrogen-containing dielectric layers and a subsequent firing process to inject hydrogen throughout the bulk of the silicon solar cell and subsequent illuminated annealing processes for the formation of the boron-oxygen defects and simultaneously manipulate the charge states of hydrogen to enable defect passivation. For the photovoltaic industry with a current capacity of approximately 100 GW peak, the mitigation of boron-oxygen related light-induced degradation is a necessity to use cost-effective B-doped silicon while benefitting from the high-efficiency potential of new solar cell concepts.

  3. Pupil size regulation of threshold of light-induced melatonin suppression.

    Science.gov (United States)

    Gaddy, J R; Rollag, M D; Brainard, G C

    1993-11-01

    The capacity of pupil dilation to affect light-induced plasma melatonin suppression was tested by exposing human subjects with freely constricting or pharmacologically dilated pupils to either 50 (n = 6), 100 (n = 8), or 200 lux (n = 5) of white light presented over the entire visual field. Pupil dilation significantly enhanced low level white light-induced melatonin suppression over that elicited with freely constricting pupils. Although 100 and 200 lux white light exposures resulted in significant melatonin suppression over control (no light) conditions, the effects of 50 lux were not strong enough to demonstrate statistically significant suppression with six subjects. Linear regression did not reveal a systematic relationship between theoretical retinal illuminance in Trolands and magnitude of melatonin suppression. These results suggest that pupil diameter may be a factor in the effectiveness of light stimuli used to shift circadian rhythms or to treat seasonal depression or sleep disorders.

  4. Antagonistic dark/light-induced SigB/SigD, group 2 sigma factors, expression through redox potential and their roles in cyanobacteria.

    Science.gov (United States)

    Imamura, Sousuke; Asayama, Munehiko; Takahashi, Hiroyuki; Tanaka, Kan; Takahashi, Hideo; Shirai, Makoto

    2003-11-20

    The expression of group 2 sigma factors is characterized in a cyanobacterium Synechocystis sp. PCC 6803 grown in culture, changing light conditions (white, red and blue light, and darkness), or the presence of drugs (rifampicin, chloramphenicol, DCMU, and DBMIB), and the roles of these sigma factors are elucidated. The expression of dark/light-induced SigB/SigD was accelerated under opposite redox (oxidation/reduction) states in an electron transport chain of photosynthesis. Expression of the dark-induced lrtA and light-induced psbA2/3 transcript was significantly reduced in the sigB and sigD knockout strains, respectively. Abundant amounts of sigB transcript and protein were observed in the sigC knockout strain, implying that SigC represses SigB expression under light. These findings clearly showed that SigB/SigD with another group 2 sigma, SigC, contribute to transcription for a subset of dark/light-responsive genes in the cyanobacterium. A possible model for SigB/SigD is presented and the potential ability for promoter recognition is also discussed.

  5. Progress of UV-NIL template making

    Science.gov (United States)

    Hiraka, Takaaki; Mizuochi, Jun; Nakanishi, Yuko; Yusa, Satoshi; Sasaki, Shiho; Morikawa, Yasutaka; Mohri, Hiroshi; Hayashi, Naoya

    2009-04-01

    Nano-imprint lithography (NIL) has been counted as one of the lithography candidates for hp32nm node and beyond and has showed excellent resolution capability with remarkable low line edge roughness that is attracting many researchers in the industry who were searching for the finest patterning technology. Therefore, recently we have been focusing on the resolution improvement on the NIL templates with the 100keV acceleration voltage spot beam (SB) EB writer and the 50keV acceleration voltage variable shaped beam (VSB) EB writer. The 100keV SB writers have high resolution capability, but they show fatally low throughput if we need full chip writing. Usually templates for resolution pioneers needed just a small field (several hundred microns square or so), but recently requirements for full chip templates are increasing. For full chip writing, we have also started the resolution improvement with the 50keV VSB writers used in current 4X photomask manufacturing. The 50keV VSB writers could generate full chip pattern in a reasonable time though resolution limits are inferior to that with the 100keV SB writers. In this paper, we will show latest results with both the 100keV SB and the 50keV VSB EB writers. With the 100keV SB EB writer, we have achieved down to hp15nm resolution for line and space pattern, but found that to achieve further improvement, an innovation in pattern generation method or material would be inevitable. With the 50keV VSB EB writer, we have achieved down to hp22nm resolution for line and space pattern. Though NIL has excellent resolution capability, solutions for defect inspection and repair are not clearly shown yet. In this paper, we will show preliminary inspection results with an EB inspection tool. We tested an EB inspection tool by Hermes Microvision, Inc. (HMI), which was originally developed for and are currently used as a wafer inspection tool, and now have been started to seek the application for mask use, using a programmed defect

  6. Identification of novel light-induced genes in the suprachiasmatic nucleus

    Directory of Open Access Journals (Sweden)

    Piontkivska Helen

    2007-11-01

    Full Text Available Abstract Background The transmission of information about the photic environment to the circadian clock involves a complex array of neurotransmitters, receptors, and second messenger systems. Exposure of an animal to light during the subjective night initiates rapid transcription of a number of immediate-early genes in the suprachiasmatic nucleus of the hypothalamus. Some of these genes have known roles in entraining the circadian clock, while others have unknown functions. Using laser capture microscopy, microarray analysis, and quantitative real-time PCR, we performed a comprehensive screen for changes in gene expression immediately following a 30 minute light pulse in suprachiasmatic nucleus of mice. Results The results of the microarray screen successfully identified previously known light-induced genes as well as several novel genes that may be important in the circadian clock. Newly identified light-induced genes include early growth response 2, proviral integration site 3, growth-arrest and DNA-damage-inducible 45 beta, and TCDD-inducible poly(ADP-ribose polymerase. Comparative analysis of promoter sequences revealed the presence of evolutionarily conserved CRE and associated TATA box elements in most of the light-induced genes, while other core clock genes generally lack this combination of promoter elements. Conclusion The photic signalling cascade in the suprachiasmatic nucleus activates an array of immediate-early genes, most of which have unknown functions in the circadian clock. Detected evolutionary conservation of CRE and TATA box elements in promoters of light-induced genes suggest that the functional role of these elements has likely remained the same over evolutionary time across mammalian orders.

  7. Platelet-Derived Growth Factor-BB Lessens Light-Induced Rod Photoreceptor Damage in Mice.

    Science.gov (United States)

    Takahashi, Kei; Shimazawa, Masamitsu; Izawa, Hiroshi; Inoue, Yuki; Kuse, Yoshiki; Hara, Hideaki

    2017-12-01

    Platelet-derived growth factor (PDGF)-BB is known to have neuroprotective effects against various neurodegenerative disorders. The purpose of this study was to determine whether PDGF-BB can be neuroprotective against light-induced photoreceptor damage in mice. Mice were exposed to 8000-lux luminance for 3 hours to induce phototoxicity. Two hours before light exposure, the experimental mice were injected with PDGF-BB intravitreally, and the control mice were injected with phosphate-buffered saline. The light-exposed PDGF-BB-injected mice and saline-injected mice were evaluated electroretinographically and histologically. The site and expression levels of PDGFR-β and PDGF-BB were determined by immunostaining and Western blotting, respectively. The effect of PDGF-BB on light-induced cone and rod photoreceptor damage was also evaluated in vitro in 661W cells, a murine cone photoreceptor cell line, and in primary retinal cell cultures. An intravitreal injection of PDGF-BB significantly reduced the decrease in the amplitudes of the electroretinograms (ERGs) and the thinning of the outer nuclear layer (ONL) induced by the light exposure. It also reduced the number of TUNEL-positive cells in the ONL. PDGFR-β was expressed in the rod outer segments (OSs) but not the cone OSs. The levels of PDGF-BB and PDGFR-β were decreased after light irradiation. In addition, PDGF-BB had protective effects against light-induced damage to cells of rod photoreceptors but had no effect on the 661W cells in vitro. These findings indicate that PDGF-BB reduces the degree of light-induced retinal damage by activating PDGFR-β in rod photoreceptors. These findings suggest that PDGF-BB could play a role in the prevention of degeneration in eyes susceptible to phototoxicity.

  8. Spin Hall effects for cold atoms in a light induced gauge potential

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Shi-Liang; /Michigan U., MCTP /South China Normal U.; Fu, Hao; /Michigan U., MCTP; Wu, C.-J.; /Santa Barbara, KITP; Zhang, S.-C.; /Stanford U., Phys. Dept.; Duan, L.-M. /Michigan U., MCTP

    2010-03-16

    We propose an experimental scheme to observe spin Hall effects with cold atoms in a light induced gauge potential. Under an appropriate configuration, the cold atoms moving in a spatially varying laser field experience an effective spin-dependent gauge potential. Through numerical simulation, we demonstrate that such a gauge field leads to observable spin Hall currents under realistic conditions. We also discuss the quantum spin Hall state in an optical lattice.

  9. Light-Induced Local Heating for Thermophoretic Manipulation of DNA in Polymer Micro- and Nanochannels

    DEFF Research Database (Denmark)

    Thamdrup, Lasse Højlund; Larsen, Niels Bent; Kristensen, Anders

    2010-01-01

    We present a method for making polymer chips with a narrow-band near-infrared absorber layer that enables light-induced local heating of liquids inside fluidic micro- and nanochannels fabricated by thermal imprint in polymethyl methacrylate. We have characterized the resulting liquid temperature...... profiles in microchannels using the temperature dependent fluorescence of the complex [Ru(bpy)3]2+. We demonstrate thermophoretic manipulation of individual YOYO-1 stained T4 DNA molecules inside micro- and nanochannels....

  10. Current induced light emission and light induced current in molecular tunneling junctions

    OpenAIRE

    Galperin, Michael; Nitzan, Abraham

    2005-01-01

    The interaction of metal-molecule-metal junctions with light is considered within a simple generic model. We show, for the first time, that light induced current in unbiased junctions can take place when the bridging molecule is characterized by a strong charge-transfer transition. The same model shows current induced light emission under potential bias that exceeds the molecular excitation energy. Results based on realistic estimates of molecular-lead coupling and molecule-radiation field in...

  11. Light-induced melatonin suppression at night after exposure to different wavelength composition of morning light.

    Science.gov (United States)

    Kozaki, Tomoaki; Kubokawa, Ayaka; Taketomi, Ryunosuke; Hatae, Keisuke

    2016-03-11

    Bright nocturnal light has been shown to suppress melatonin secretion. However, bright light exposure during the day might reduce light-induced melatonin suppression at night. The human circadian system is sensitive to short wavelength light. This study evaluated the preventive effect of different wavelengths of daytime light on light-induced melatonin suppression at night. Twelve male subjects were exposed to various light conditions (dim, white, and bluish white light) between the hours of 09:00 and 10:30 (daytime light conditions). They were then exposed to light (300lx) again between 01:00 and 02:30 (night-time light exposure). Subjects provided saliva samples before (00:55) and after night-time light exposure (02:30). A two-tailed paired t-test yielded significant decrements in melatonin concentrations after night-time light exposure under daytime dim and white light conditions. No significant differences were found in melatonin concentrations between pre- and post-night-time light exposure with bluish-white light. Present findings suggest that daytime blue light exposure has an acute preventive impact on light-induced melatonin suppression in individuals with a general life rhythm (sleep/wake schedule). These findings may be useful for implementing artificial light environments for humans in, for example, hospitals and underground shopping malls to reduce health risks. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  12. A versatile, fast, and efficient method of visible-light-induced surface grafting polymerization.

    Science.gov (United States)

    Xiong, Xinhong; Liu, Wei; Luan, Yafei; Du, Jun; Wu, Zhaoqiang; Chen, Hong

    2014-05-20

    To overcome the problem caused by the lability of the Au-S bond, we demonstrate the first use of Mn2(CO)10 for visible-light-induced surface grafting polymerization on Au surfaces in this paper. The visible-light-induced surface grafting of poly(N-isopropylacrylamide) (PNIPAAm) has the features of a "controlled" polymerization, which is characterized by a linear relationship between the thickness of the grafting layer and the monomer concentration. Ellipsometry indicated the formation of PNIPAAm films of up to ∼200 nm in thickness after only 10 min of polymerization at room temperature, demonstrating that this is a very fast process in comparison with traditional grafting polymerization techniques. Moreover, to demonstrate the potential applications of our approach, different substrates grafted by PNIPAAm and the covalent immobilization of a range of polymers on Au surfaces were also demonstrated. Considering the advantages of simplicity, efficiency, and mild reaction conditions as well as the ability of catecholic derivatives to bind to a large variety of substrates, this visible-light-induced grafting method is expected to be useful in designing functional interfaces.

  13. Synthesis of crystalline gels on a light-induced polymerization 3D printer (Conference Presentation)

    Science.gov (United States)

    Gong, Jin; Mao, Yuchen; Miyazaki, Takuya; Zhu, Meifang

    2017-04-01

    3D printing, also knows as Additive Manufacturing (AM), was first commercialized in 1986, and has been growing at breakneck speed since 2009 when Stratasys' key patent expired. Currently the 3D printing machines coming on the market can be broadly classified into three categories from the material state point of view: plastic filament printers, powder (or pellet) printers, film printers and liquid photopolymer printers. Much of the work in our laboratory revolves around the crystalline gels. We have succeeded in developing them with high toughness, high flexibility, particularly with many functions as shape memory, energy storage, freshness-retaining, water-absorbing, etc. These crystalline gels are synthesized by light-induced radical polymerization that involves light-reactive monomer having the property of curing with light of a sufficient energy to drive the reaction from liquid to solid. Note that the light-induced polymerized 3D printing uses the same principle. To open up the possibilities for broader application of our crystalline functional gels, we are interested in making them available for 3D printing. In this paper, we share the results of our latest research on the 3D printing of crystalline gels on light-induced 3D printers.

  14. Light-induced biocidal action of conjugated polyelectrolytes supported on colloids.

    Science.gov (United States)

    Chemburu, Sireesha; Corbitt, Thomas S; Ista, Linnea K; Ji, Eunkyung; Fulghum, Julia; Lopez, Gabriel P; Ogawa, Katsu; Schanze, Kirk S; Whitten, David G

    2008-10-07

    A series of water soluble, cationic conjugated polyelectrolytes (CPEs) with backbones based on a poly(phenylene ethynylene) repeat unit structure and tetraakylammonium side groups exhibit a profound light-induced biocidal effect. The present study examines the biocidal activity of the CPEs, correlating this activity with the photophysical properties of the polymers. The photophysical properties of the CPEs are studied in solution, and the results demonstrate that direct excitation produces a triplet excited-state in moderate yield, and the triplet is shown to be effective at sensitizing the production of singlet oxygen. Using the polymers in a format where they are physisorbed or covalently grafted to the surface of colloidal silica particles (5 and 30 microm diameter), we demonstrate that they exhibit light-activated biocidal activity, effectively killing Cobetia marina and Pseudomonas aeruginosa. The light-induced biocidal activity is also correlated with a requirement for oxygen suggesting that interfacial generation of singlet oxygen is the crucial step in the light-induced biocidal activity.

  15. Light-induced processes on atoms and clusters confined in nanoporous silica and organic films

    Science.gov (United States)

    Moi, L.; Burchianti, A.; Bogi, A.; Marinelli, C.; Maibohm, C.; Mariotti, E.

    2007-03-01

    The study of light induced processes on atoms and nanoparticles confined in organic films or in dielectric structures is motivated both by fundamental interest and applications in optics and photonics. Depending on the light intensity and frequency and the kind of confinement, different processes can be activated. Among them photodesorption processes have a key role. Non thermal light induced atomic desorption has been observed from siloxane and paraffin films previously exposed to alkali vapors. This effect has been extensively investigated and used both to develop photo-atom sources and to load magneto-optical traps. Recently we observed huge photodesorption of alkali atoms embedded in nanoporous silica. In this case the atomic photodesorption causes, by properly tuning the light frequency, either formation or evaporation of clusters inside the silica matrix. Green-blue light desorbs isolated adatoms from the glass surface eventually producing clusters, whereas red-near infrared (NIR) light causes cluster evaporation due to direct excitation of surface plasmon oscillations. Green-blue light induces cluster formation taking advantage of the dense atomic vapor, which diffuses through the glass nano-cavities. Both processes are reversible and even visible to the naked eye. By alternatively illuminating the porous glass sample with blue-green and red-NIR light we demonstrate that the glass remembers the illumination sequences behaving as an effective rereadable and rewritable optical medium.

  16. Accelerated stability testing of organic photovoltaics using concentrated sunlight

    DEFF Research Database (Denmark)

    Katz, Eugene A.; Manor, Assaf; Mescheloff, Asaf

    2012-01-01

    We suggest to use concentrated sunlight for accelerated studies of light-induced mechanisms in the degradation of organic photovoltaics (OPV) based on the polymer (P3HT)/fullerene (PCBM) bulk heterojunctions. Two particular cases of the degradation are reported....

  17. Cloning nanocrystal morphology with soft templates

    Science.gov (United States)

    Thapa, Dev Kumar; Pandey, Anshu

    2016-08-01

    In most template directed preparative methods, while the template decides the nanostructure morphology, the structure of the template itself is a non-general outcome of its peculiar chemistry. Here we demonstrate a template mediated synthesis that overcomes this deficiency. This synthesis involves overgrowth of silica template onto a sacrificial nanocrystal. Such templates are used to copy the morphologies of gold nanorods. After template overgrowth, gold is removed and silver is regrown in the template cavity to produce a single crystal silver nanorod. This technique allows for duplicating existing nanocrystals, while also providing a quantifiable breakdown of the structure - shape interdependence.

  18. How light-induced charge transfer accelerates the receptor-state recovery of photoactive yellow protein from its signaling state

    NARCIS (Netherlands)

    Premvardhan, L.L.; Horst, M.A.; Hellingwerf, K.J.; van Grondelle, R.

    2005-01-01

    Stark (electroabsorption) spectra of the M100A mutant of photoactive yellow protein reveal that the neutral, cis cofactor of the pB intermediate undergoes a strikingly large change in the static dipole moment (|Δμ| = 19 Debye) on photon absorption. The formation of this charge-separated species, in

  19. Astaxanthin analogs, adonixanthin and lycopene, activate Nrf2 to prevent light-induced photoreceptor degeneration.

    Science.gov (United States)

    Inoue, Yuki; Shimazawa, Masamitsu; Nagano, Ryota; Kuse, Yoshiki; Takahashi, Kei; Tsuruma, Kazuhiro; Hayashi, Masahiro; Ishibashi, Takashi; Maoka, Takashi; Hara, Hideaki

    2017-07-01

    Carotenoids, in particular astaxanthin, possess potent antioxidant capabilities. Astaxanthin also induces NF-E2-related factor 2 (Nrf2), which plays a major regulatory role in the antioxidative response. However, little is known whether the carotenoid, by-products of astaxanthin, activate Nrf2. Toward this end, we screened eight astaxanthin analogs for Nrf2 activation in murine photoreceptor cell line, 661 W, by quantitative reverse transcription-polymerase chain reaction (qRT-PCR). In addition, we monitored cell death in 661 W cells pretreated with astaxanthin analogs or only pretreated for 6 h with astaxanthin analogs and then exposed to light. Furthermore, we quantified the reactive oxygen species (ROS) production. Cell death was quantified after light exposure by nuclear staining. Nrf2-controlled genes Ho-1, Nqo-1, and Gclm by qRT-PCR and Nrf2 in the nucleus were upregulated in 661 W cells exposed astaxanthin, adonixanthin, echinenone, and lycopene. Moreover, astaxanthin, adonixanthin, echinenone, β-carotene, adonirubin, and lycopene, but not canthaxanthin, suppressed ROS production and protected cells against light-induced damage. Moreover, pretreatment with adonixanthin or lycopene only before light exposure protected against light-induced cell damage and Nrf2 silencing canceled these effects. These findings indicate that the more potent astaxanthin analogs, adonixanthin and lycopene, protect against light-induced cell damage through not only an anti-oxidative response but also through Nrf2 activation. Copyright © 2017 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

  20. Using Light-Induced Thermocleavage in a Roll-to-Roll Process for Polymer Solar Cells

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Norrman, Kion

    2010-01-01

    cell modules using light-induced thermocleavage. The process employs full solution processing in air for all five layers in the device and does not employ indium−tin oxide or vacuum processing. The process steps were carefully analyzed using X-ray photoelectron spectroscopy, time-of-flight secondary......We report on the use of intense visible light with a narrow spectral distribution matched to the region where the conjugated polymer material absorbs to selectively heat the active material and induce thermocleavage. We show a full roll-to-roll process, leading to complete large-area polymer solar...

  1. Transcriptomic analyses reveal species-specific light-induced anthocyanin biosynthesis in chrysanthemum.

    Science.gov (United States)

    Hong, Yan; Tang, Xingjiao; Huang, He; Zhang, Yuan; Dai, Silan

    2015-03-17

    The flower colour of agricultural products is very important for their commercial value, which is mainly attributed to the accumulation of anthocyanins. Light is one of the key environmental factors that affect the anthocyanin biosynthesis. However, the deep molecular mechanism remains elusive, and many problems regarding the phenotypic change and the corresponding gene regulation are still unclear. In the present study, Chrysanthemum × morifolium 'Purple Reagan', a light-responding pigmentation cultivar, was selected to investigate the mechanism of light-induced anthocyanin biosynthesis using transcriptomic analyses. Only cyanidin derivatives were identified based on the analyses of the pigmentation in ray florets. Shading experiments revealed that the capitulum was the key organ and that its bud stage was the key phase responding to light. These results were used to design five libraries for transcriptomic analyses, including three capitulum developmental stages and two light conditions. RNA sequences were de novo assembled into 103,517 unigenes, of which 60,712 were annotated against four public protein databases. As many as 2,135 unigenes were differentially expressed between the light and dark libraries with 923 up-regulated and 1,212 down-regulated unigenes in response to shading. Next, interactive pathway analysis showed that the anthocyanin biosynthetic pathway was the only complete metabolic pathway both modulated in response to light and related to capitulum development. Following the shading treatment, nearly all structural genes involved in the anthocyanin biosynthetic pathway were down-regulated. Moreover, three CmMYB genes and one CmbHLH gene were identified as key transcription factors that might participate in the regulation of anthocyanin biosynthesis under light conditions based on clustering analysis and validation by RT-qPCR. Finally, a light-induced anthocyanin biosynthesis pathway in chrysanthemums was inferred. The pigmentation of the ray

  2. Light-induced EPR study of a direct light conversion by polymer/fullerene bulk heterojunctions

    Energy Technology Data Exchange (ETDEWEB)

    Krinichnyi, V.I.; Yudanova, E.I. [Institute of Problems of Chemical Physics, Chernogolovka (Russian Federation)

    2010-07-01

    Paramagnetic charge carriers photoinduced in poly(3-alkylthiophene)s modified by 6,6-phenyl-C{sub 61}-butanoic acid methyl ester (PCBM) and bis-PCBM by photons with the energy of 1.98 - 2.73 eV were investigated by X-band Light-Induced EPR (LEPR) method. LEPR spectra were attributed to non-interacting polarons and methanofullerene anion-radicals with different magnetic and relaxation parameters. A part of these charge carriers was proved to be trapping in a polymer matrix. The number of mobile charge carriers and their relaxation follow activation law. (orig.)

  3. Robust measurement of thin-film photovoltaic modules exhibiting light-induced transients

    Science.gov (United States)

    Deceglie, Michael G.; Silverman, Timothy J.; Marion, Bill; Kurtz, Sarah R.

    2015-09-01

    Light-induced changes to the current-voltage characteristic of thin-film photovoltaic modules (i.e. light-soaking effects) frustrate the repeatable measurement of their operating power. We describe best practices for mitigating, or stabilizing, light-soaking effects for both CdTe and CIGS modules to enable robust, repeatable, and relevant power measurements. We motivate the practices by detailing how modules react to changes in different stabilization methods. We also describe and demonstrate a method for validating alternative stabilization procedures, such as those relying on forward bias in the dark. Reliable measurements of module power are critical for qualification testing, reliability testing, and power rating.

  4. Robust Measurement of Thin-Film Photovoltaic Modules Exhibiting Light-Induced Transients: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Deceglie, Michael, G.; Silverman, Timothy J.; Marion, Bill; Kurtz, Sarah R.

    2015-09-09

    Light-induced changes to the current-voltage characteristic of thin-film photovoltaic modules (i.e. light-soaking effects) frustrate the repeatable measurement of their operating power. We describe best practices for mitigating, or stabilizing, light-soaking effects for both CdTe and CIGS modules to enable robust, repeatable, and relevant power measurements. We motivate the practices by detailing how modules react to changes in different stabilization methods. We also describe and demonstrate a method for validating alternative stabilization procedures, such as those relying on forward bias in the dark. Reliable measurements of module power are critical for qualification testing, reliability testing, and power rating.

  5. Blue and Green Light-Induced Phototropism in Arabidopsis thaliana and Lactuca sativa L. Seedlings 1

    Science.gov (United States)

    Steinitz, Benjamin; Ren, Zhangling; Poff, Kenneth L.

    1985-01-01

    Exposure time-response curves for blue and green light-induced phototropic bending in hypocotyls of Arabidopsis thaliana (L.) Heynh. and Lactuca sativa L. seedlings are presented. These seedlings show significant phototropic sensitivity up to 540 to 550 nanometers. Since wave-lengths longer than 560 nanometers do not induce phototropic bending, it is suggested that the response to 510 to 550 nanometers light is mediated by the specific blue light photoreceptor of phototropism. We advise care in the use of green `safelights' for studies of phototropism. PMID:16664021

  6. Light-induced transition in spin-crossover compounds with correlated stochastic processes

    Science.gov (United States)

    Gudyma, Iurii V.; Maksymov, Artur

    2015-11-01

    The stochastic kinetics of a photoinduced phase transition in spin-crossover compounds in the presence of environmental background and systems internal noises were studied. The correlation phenomena that determine the color of internal and external noises was taken into account. The mathematical framework for the study of light-induced transition in spin-crossover nanoparticles was based on the Langevin equation and steady solution of corresponding Fokker-Planck equation. The system behavior was described by nonequilibrium (dynamic) potential in terms of Lyapunov functions for the deterministic case and by stochastic Fokker-Planck potential in the noise case action.

  7. Light-Induced Resistance Effect Observed in Nano Au Films Covered Two-Dimensional Colloidal Crystals.

    Science.gov (United States)

    Liu, Shuai; Huang, Meizhen; Yao, Yanjie; Wang, Hui; Jin, Kui-juan; Zhan, Peng; Wang, Zhenlin

    2015-09-09

    Tailoring resistance response using periodic nanostructures is one of the key issues in the current research. Two-dimensional colloidal crystals (CCs) structure is one of popular periodic nanospheres' structures and most of reports are focused on anomalous transmission of light or biomedical applications. In this work, a light-induced resistance effect is observed on silicon-based Au films covered CCs, featuring a remarkable resistance change as much as 56% and resistance switching characteristic. The diffusion and recombination of photocarriers is the crucial factor for this effect. This finding will expand photoelectricity functionality and be useful for future development of CC-based photoelectric devices.

  8. Light-induced gaps in semiconductor band-to-band transitions.

    Science.gov (United States)

    Vu, Q T; Haug, H; Mücke, O D; Tritschler, T; Wegener, M; Khitrova, G; Gibbs, H M

    2004-05-28

    We observe a triplet around the third harmonic of the semiconductor band gap when exciting 50-100 nm thin GaAs films with 5 fs pulses at 3 x 10(12) W/cm(2). The comparison with solutions of the semiconductor Bloch equations allows us to interpret the observed peak structure as being due to a two-band Mollow triplet. This triplet in the optical spectrum is a result of light-induced gaps in the band structure, which arise from coherent band mixing. The theory is formulated for full tight-binding bands and uses no rotating-wave approximation.

  9. Light-induced magnetoresistance in solution-processed planar hybrid devices measured under ambient conditions

    Directory of Open Access Journals (Sweden)

    Sreetama Banerjee

    2017-07-01

    Full Text Available We report light-induced negative organic magnetoresistance (OMAR measured in ambient atmosphere in solution-processed 6,13-bis(triisopropylsilylethynylpentacene (TIPS-pentacene planar hybrid devices with two different device architectures. Hybrid electronic devices with trench-isolated electrodes (HED-TIE having a channel length of ca. 100 nm fabricated in this work and, for comparison, commercially available pre-structured organic field-effect transistor (OFET substrates with a channel length of 20 µm were used. The magnitude of the photocurrent as well as the magnetoresistance was found to be higher for the HED-TIE devices because of the much smaller channel length of these devices compared to the OFETs. We attribute the observed light-induced negative magnetoresistance in TIPS-pentacene to the presence of electron–hole pairs under illumination as the magnetoresistive effect scales with the photocurrent. The magnetoresistance effect was found to diminish over time under ambient conditions compared to a freshly prepared sample. We propose that the much faster degradation of the magnetoresistance effect as compared to the photocurrent was due to the incorporation of water molecules in the TIPS-pentacene film.

  10. Light induced fluorescence evaluation: A novel concept for caries diagnosis and excavation.

    Science.gov (United States)

    Gugnani, Neeraj; Pandit, Ik; Srivastava, Nikhil; Gupta, Monika; Gugnani, Shalini

    2011-10-01

    In the era of minimal invasive dentistry, every effort should be directed to preserve the maximum tooth structure during cavity preparation. However, while making cavities, clinicians usually get indecisive at what point caries excavation should be stopped, so as to involve only the infected dentin. Apparent lack of valid clinical markers, difficulties with the use of caries detector dyes and chemo mechanical caries removal systems carve out a need for an improved system, which would be helpful to differentiate between the healthy and infected dentin during caries excavation. Light induced fluorescence evaluation is a novel concept implicated for caries detection and for making decisions while cavity preparation. This paper describes a few cases that explain the clinical applicability of this concept, using the SoproLife camera that works on this principle. Autofluorescence masking effect was found to be helpful for caries detection and the red fluorescence in the treatment mode was found helpful in deciding 'when to stop the excavation process.' Light induced fluorescence evaluation - Diagnosis - Treatment concept concept can be used as a guide for caries detection and excavation. It also facilitates decision making for stopping the caries excavation so as to involve infected dentin only.

  11. Impaired Mitochondrial Energy Production Causes Light-Induced Photoreceptor Degeneration Independent of Oxidative Stress.

    Directory of Open Access Journals (Sweden)

    Manish Jaiswal

    2015-07-01

    Full Text Available Two insults often underlie a variety of eye diseases including glaucoma, optic atrophy, and retinal degeneration--defects in mitochondrial function and aberrant Rhodopsin trafficking. Although mitochondrial defects are often associated with oxidative stress, they have not been linked to Rhodopsin trafficking. In an unbiased forward genetic screen designed to isolate mutations that cause photoreceptor degeneration, we identified mutations in a nuclear-encoded mitochondrial gene, ppr, a homolog of human LRPPRC. We found that ppr is required for protection against light-induced degeneration. Its function is essential to maintain membrane depolarization of the photoreceptors upon repetitive light exposure, and an impaired phototransduction cascade in ppr mutants results in excessive Rhodopsin1 endocytosis. Moreover, loss of ppr results in a reduction in mitochondrial RNAs, reduced electron transport chain activity, and reduced ATP levels. Oxidative stress, however, is not induced. We propose that the reduced ATP level in ppr mutants underlies the phototransduction defect, leading to increased Rhodopsin1 endocytosis during light exposure, causing photoreceptor degeneration independent of oxidative stress. This hypothesis is bolstered by characterization of two other genes isolated in the screen, pyruvate dehydrogenase and citrate synthase. Their loss also causes a light-induced degeneration, excessive Rhodopsin1 endocytosis and reduced ATP without concurrent oxidative stress, unlike many other mutations in mitochondrial genes that are associated with elevated oxidative stress and light-independent photoreceptor demise.

  12. Light-induced degradation of storage starch in turions of Spirodela polyrhiza depends on nitrate.

    Science.gov (United States)

    Appenroth, Klaus-J; Ziegler, Paul

    2008-10-01

    Light induces both the germination of turions of the duckweed Spirodela polyrhiza and the degradation of the reserve starch stored in the turions. The germination photoresponse requires nitrate, and we show here that nitrate is also needed for the light-induced degradation of the turion starch. Ammonium cannot substitute for nitrate in this regard, and nitrate thus acts specifically as signal to promote starch degradation in the turions. Irradiation with continuous red light leads to starch degradation via auto-phosphorylation of starch-associated glucan, water dikinase (GWD), phosphorylation of the turion starch and enhanced binding of alpha-amylase to starch granules. The present study shows that all of these processes require the presence of nitrate, and that nitrate exerts its effect on starch degradation at a point between the absorption of light by phytochrome and the auto-phosphorylation of the GWD. Nitrate acts to coordinate carbon and nitrogen metabolism in germinating turions: starch will only be broken down when sufficient nitrogen is present to ensure appropriate utilization of the released carbohydrate. These data constitute the first report of control over the initiation of reserve starch degradation by nitrate.

  13. Light-induced degradation of starch granules in turions of Spirodela polyrhiza studied by electron microscopy.

    Science.gov (United States)

    Appenroth, Klaus-J; Keresztes, Aron; Krzysztofowicz, Ewa; Gabrys, Halina

    2011-02-01

    Spirodela polyrhiza forms turions, starch-storing perennial organs. The light-induced process of starch degradation starts with an erosion of the surface of starch grains. The grain size decreases over a period of red irradiation and the surface becomes rougher. The existence of funnel-shaped erosion structures demonstrates that starch degradation is also possible inside the grains. Neither etioplasts nor clues as to their transition into chloroplasts were found in the storage tissue by transmission electron microscopy. Juvenile chloroplasts always contained the starch grains which remained from amyloplasts. No chloroplasts were found which developed independently of starch grains. Amyloplasts are therefore the only source of chloroplasts in the cells of irradiated turions. The intactness of amyloplast envelope membranes could not be directly proved by electron microscopy. However, the light-induced transition of amyloplasts into chloroplasts provides indirect evidence for the integrity of the envelope membranes throughout the whole process. The starch grains are sequestered from the cytosolic enzymes, and only plastid-localized enzymes, which have access to the starch grains, can carry out starch degradation. In this respect the turion system resembles transitory starch degradation as known from Arabidopsis leaves. On the other hand, with α-amylase playing the dominant role, it resembles the mechanism operating in the endosperm of cereals. Thus, turions appear to possess a unique system of starch degradation in plants combining elements from both known starch-storing systems.

  14. Light-induced electric field generated by photovoltaic substrates investigated through liquid crystal reorientation

    Science.gov (United States)

    Lucchetti, L.; Kushnir, K.; Reshetnyak, V.; Ciciulla, F.; Zaltron, A.; Sada, C.; Simoni, F.

    2017-11-01

    Liquid crystal reorientation is exploited to analyze the electric field generated by light irradiation in iron-doped lithium niobate crystals. The evaluation of the strength of this light-induced field is based on the measurement of the phase shift induced in a probe light beam by a liquid crystal cell built with two z-cut iron-doped lithium niobate crystals as substrates. Then, the field profile has been determined starting from a Gaussian-like surface charge density following the model described in the text. The director profile corresponding to the modelled electric field is in good agreement with the director reorientation evaluated experimentally by means of the light-induced phase shift. This investigation gives a new approach to study the effects based on the photovoltaic response of lithium niobate crystals. Moreover, the characterization of the electric field optically generated inside the LC layer is highly desirable in view of the realization of new all-optical devices to be integrated in optofluidic platforms.

  15. Preparation of Hierarchical BiOBr Microspheres for Visible Light-Induced Photocatalytic Detoxification and Disinfection

    Directory of Open Access Journals (Sweden)

    Ayla Ahmad

    2016-01-01

    Full Text Available Photocatalytic degradation is a promising alternative to traditional wastewater treatment methods. Recently developed visible light-responsive photocatalyst, BiOBr, has attracted extensive attentions. Hereby, a detailed investigation of application of BiOBr to bacterial inactivation and organic pollutants degradation is reported. Hydrothermal catalyst was prepared using template-free method. While, for solvothermal synthesis, CTAB was used as a template. Results indicate a higher photocatalytic activity by the solvothermally prepared catalyst. Solvothermally prepared BiOBr exhibited high photocatalytic activities in both water detoxification and disinfection.

  16. Wide band gap semiconductor templates

    Energy Technology Data Exchange (ETDEWEB)

    Arendt, Paul N. (Los Alamos, NM); Stan, Liliana (Los Alamos, NM); Jia, Quanxi (Los Alamos, NM); DePaula, Raymond F. (Santa Fe, NM); Usov, Igor O. (Los Alamos, NM)

    2010-12-14

    The present invention relates to a thin film structure based on an epitaxial (111)-oriented rare earth-Group IVB oxide on the cubic (001) MgO terminated surface and the ion-beam-assisted deposition ("IBAD") techniques that are amendable to be over coated by semiconductors with hexagonal crystal structures. The IBAD magnesium oxide ("MgO") technology, in conjunction with certain template materials, is used to fabricate the desired thin film array. Similarly, IBAD MgO with appropriate template layers can be used for semiconductors with cubic type crystal structures.

  17. Supply-Chain Optimization Template

    Science.gov (United States)

    Quiett, William F.; Sealing, Scott L.

    2009-01-01

    The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

  18. Web Template Extraction Based on Hyperlink Analysis

    Directory of Open Access Journals (Sweden)

    Julián Alarte

    2015-01-01

    Full Text Available Web templates are one of the main development resources for website engineers. Templates allow them to increase productivity by plugin content into already formatted and prepared pagelets. For the final user templates are also useful, because they provide uniformity and a common look and feel for all webpages. However, from the point of view of crawlers and indexers, templates are an important problem, because templates usually contain irrelevant information such as advertisements, menus, and banners. Processing and storing this information is likely to lead to a waste of resources (storage space, bandwidth, etc.. It has been measured that templates represent between 40% and 50% of data on the Web. Therefore, identifying templates is essential for indexing tasks. In this work we propose a novel method for automatic template extraction that is based on similarity analysis between the DOM trees of a collection of webpages that are detected using menus information. Our implementation and experiments demonstrate the usefulness of the technique.

  19. Combination of light-induced effect and gate bias stress in organic phototransistors

    Science.gov (United States)

    Liguori, R.; Sheets, W. C.; Bezzeccheri, E.; Facchetti, A.; Rubino, A.

    2016-05-01

    In this work, the photoresponse of pentacene-based thin film transistors fabricated with a photocurable polymer insulator was investigated under visible and ultraviolet illumination. A simple model was developed to distinguish a photoconductive and a photovoltaic effect, that is, a direct photocurrent and a current enhancement caused by a threshold voltage shift. The direction of the light-induced threshold translation is affected by measurement conditions (e.g. integration time and voltage range) and is related to the nature of the trap states, specifically those located in the pentacene film near the interface with the polymer. In particular, it was shown that, thanks to this phenomenon, the photosensitivity of the fabricated phototransistors could be modulated by the gate bias applied during illumination.

  20. Light-induced antibacterial activity of electrospun chitosan-based material containing photosensitizer.

    Science.gov (United States)

    Severyukhina, A N; Petrova, N V; Yashchenok, A M; Bratashov, D N; Smuda, K; Mamonova, I A; Yurasov, N A; Puchinyan, D M; Georgieva, R; Bäumler, H; Lapanje, A; Gorin, D A

    2017-01-01

    Increasing antimicrobial resistance requires the development of novel materials and approaches for treatment of various infections. Utilization of photodynamic therapy represents an advanced alternative to antibiotics and metal-based agents. Here, we report the fabrication of electrospun material that possesses benefits of both topical antimicrobial and photodynamic therapies. This material combines chitosan, as a biocompatible polymer, and a second generation photosensitizer. The incorporation of photosensitizer doesn't affect the material morphology and its nearly uniform distribution in fibers structure was observed by confocal Raman microscopy. Owing to photosensitizer the prepared material exhibits the light-induced and spatially limited antimicrobial activity that was demonstrated against Staphylococcus aureus, an important etiological infectious agent. Such material can be potentially used in antibacterial therapy of chronic wounds, infections of diabetic ulcers, and burns, as well as rapidly spreading and intractable soft-tissue infections caused by resistant bacteria. Copyright © 2016. Published by Elsevier B.V.

  1. Nanoimprinted polymer chips for light induced local heating of liquids in micro- and nanochannels

    DEFF Research Database (Denmark)

    Thamdrup, Lasse Højlund; Pedersen, Jonas Nyvold; Flyvbjerg, Henrik

    2010-01-01

    A nanoimprinted polymer chip with a thin near-infrared absorber layer that enables light-induced local heating (LILH) of liquids inside micro- and nanochannels is presented. An infrared laser spot and corresponding hot-spot could be scanned across the device. Large temperature gradients yield...... thermophoretic forces, which are used to manipulate and stretch individual DNA molecules confined in nanochannels. The absorber layer consists of a commercially available phthalocyanine dye (Fujifilm), with a narrow absorption peak at approximately 775 nm, dissolved in SU-8 photoresist (Microchem Corp.). The 500...... a 785 nm laser diode was focused from the backside of the chip to a spot diameter down to 5 ..m in the absorber layer, yielding a localized heating (Gaussian profile) and large temperature gradients in the liquid in the nanochannels. A laser power of 38 mW yielded a temperature of 40°C in the center...

  2. Assessing the efficacy of denture cleaners with quantitative light-induced fluorescence (QLF).

    Science.gov (United States)

    Adeyemi, Adejumoke Adeola; Jarad, Fadi; Pender, Neil; Higham, Susan Mary

    2007-12-01

    The aim of this study was to evaluate Quantitative Light Induced Fluorescence (QLF) analysis as a means of determining the ability of denture cleaners to remove stain from denture teeth. This study investigated the appearance of acrylic resin denture teeth subjected to QLF conditions in vitro. It aimed to determine if QLF was an appropriate method for detecting stain and its removal on acrylic resin denture teeth in vitro and also to develop a quantitative and reproducible method for assessing the efficacy of denture cleaners using QLF. This study showed that not all acrylic resin denture teeth fluoresced under QLF examination. QLF demonstrated the ability to detect and quantify longitudinal changes in stain removal by the various denture cleaners used in the study.

  3. Visible light induced ocular delayed bioluminescence as a possible origin of negative afterimage

    CERN Document Server

    Bokkon, I; Wang, C; Dai, J; Salari, V; Grass, F; Antal, I

    2011-01-01

    The delayed luminescence of biological tissues is an ultraweak reemission of absorbed photons after exposure to external monochromatic or white light illumination. Recently, Wang, B\\'okkon, Dai and Antal (Brain Res. 2011) presented the first experimental proof of the existence of spontaneous ultraweak biophoton emission and visible light induced delayed ultraweak photon emission from in vitro freshly isolated rat's whole eye, lens, vitreous humor and retina. Here, we suggest that the photobiophysical source of negative afterimage can also occur within the eye by delayed bioluminescent photons. In other words, when we stare at a colored (or white) image for few seconds, external photons can induce excited electronic states within different parts of the eye that is followed by a delayed reemission of absorbed photons for several seconds. Finally, these reemitted photons can be absorbed by nonbleached photoreceptors that produce a negative afterimage. Although this suggests the photobiophysical source of negativ...

  4. Photo-sensible (thymine containing) azo-polysiloxanes: synthesis and light induced effects

    Energy Technology Data Exchange (ETDEWEB)

    Enea, R; Hurduc, N; Iordache, I [Technical University of Iasi, Department of Natural and Synthetic Polymers, Bd.Mangeron 71, 700050-Iasi (Romania); Apostol, I; Damian, V [National Institute for Laser, plasma and Radiation Physics, Atomistilor str. 409, 077125, Bucharest-Magurele (Romania)], E-mail: nhurduc@ch.tuiasi.ro, E-mail: ileana.apostol@inflpr.ro

    2008-03-15

    Abstract. The paper presents the possibility to obtain azo-polysiloxanes modified with thymine and their light induced processing with potential interest in opto-electronics or biomolecules nanomanipulation. The presence of the thymine group in the polymeric structure can confer to material biological properties, in the same time the capacity of tymine to generate H-bonds being useful to the relief geometry stabilization in time. The investigated polymers were obtained in a two step reaction, starting from a polysiloxane containing chlorobenzyl groups in the side chain. The azopolysiloxanes' photochromic behaviour was investigated in solid state, using thin films etalated on the surface of a quartz slide. The effect of surface relief structuration process under the action of UV (355 nm) laser radiation was studied. Laser induced effects on the material surface depends on the incident laser fluence and number of pulses.

  5. Synthesis and Light Induced Characteristics of Siloxane Substituted Azobenzene: An Application for Optical Storage Device

    Directory of Open Access Journals (Sweden)

    A. R. Yuvaraj

    2016-01-01

    Full Text Available The light induced behaviour of siloxane substituted azobenzene compounds in the presence of alkylene spacers is reported for the first time. Firstly, these photosensitive compounds were synthesized and elucidated the molecular structure by spectral analysis such as NMR, FTIR, and UV/Vis. Photoisomerization effect was evaluated in solution and also in nematic phase. The photosaturation occurred exactly at 29 seconds, whereas thermal back relaxation was observed ranging from 19.8 to 23.8 hours. Long duration of the thermal back relaxation is due to the presence of sterically hindered siloxane group substituted to the azobenzene molecules. Decrease in the duration of cis-trans isomerization was found when the number of alkylene spacers was increased. These siloxane based azobenzene derivatives are useful for the fabrication of optical storage device and molecular switches.

  6. A synthetic erectile optogenetic stimulator enabling blue-light-inducible penile erection.

    Science.gov (United States)

    Kim, Taeuk; Folcher, Marc; Doaud-El Baba, Marie; Fussenegger, Martin

    2015-05-11

    Precise spatiotemporal control of physiological processes by optogenetic devices inspired by synthetic biology may provide novel treatment opportunities for gene- and cell-based therapies. An erectile optogenetic stimulator (EROS), a synthetic designer guanylate cyclase producing a blue-light-inducible surge of the second messenger cyclic guanosine monophosphate (cGMP) in mammalian cells, enabled blue-light-dependent penile erection associated with occasional ejaculation after illumination of EROS-transfected corpus cavernosum in male rats. Photostimulated short-circuiting of complex psychological, neural, vascular, and endocrine factors to stimulate penile erection in the absence of sexual arousal may foster novel advances in the treatment of erectile dysfunction. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Light-induced changes in bottled white wine and underlying photochemical mechanisms.

    Science.gov (United States)

    Grant-Preece, Paris; Barril, Celia; Schmidtke, Leigh M; Scollary, Geoffrey R; Clark, Andrew C

    2017-03-04

    Bottled white wine may be exposed to UV-visible light for considerable periods of time before it is consumed. Light exposure may induce an off-flavor known as "sunlight" flavor, bleach the color of the wine, and/or increase browning and deplete sulfur dioxide. The changes that occur in bottled white wine exposed to light depend on the wine composition, the irradiation conditions, and the light exposure time. The light-induced changes in the aroma, volatile composition, color, and concentrations of oxygen and sulfur dioxide in bottled white wine are reviewed. In addition, the photochemical reactions thought to have a role in these changes are described. These include the riboflavin-sensitized oxidation of methionine, resulting in the formation of methanethiol and dimethyl disulfide, and the photodegradation of iron(III) tartrate, which gives rise to glyoxylic acid, an aldehyde known to react with flavan-3-ols to form yellow xanthylium cation pigments.

  8. Optimal camera and illumination angulations for detection of interproximal caries using quantitative light-induced fluorescence.

    Science.gov (United States)

    Buchalla, W; Lennon, A M; van der Veen, M H; Stookey, G K

    2002-01-01

    The aim of the study was to find the optimal illumination and camera angulations for interproximal use of quantitative light-induced fluorescence (QLF). A multiaxis optical bench was developed and interproximal tooth assemblies were investigated using a modified version of QLF. Extracted human premolars without caries (n = 8) and with interproximal D1, D2 and D3 caries (n = 20) were selected. Tooth-pair models without caries and with interproximal caries of matching size, location, and shape were imaged with varying camera and illumination directions from buccal (0 degrees) to occlusal (90 degrees) to lingual (180 degrees) in steps of 30 degrees using a PC and framegrabber and examined for observed presence. Interproximal lesions could be detected in all teeth, but observed presence was dependent on camera angulation (p caries could be detected with the camera in the 90 degree position. Copyright 2002 S. Karger AG, Basel

  9. Numerical study of light-induced phase behavior of smectic solids

    Science.gov (United States)

    Chung, Hayoung; Park, Jaesung; Cho, Maenghyo

    2016-10-01

    By the chemical cross-linking of rigid molecules, liquid crystal polymer (LCP) has been envisaged as a novel heterogeneous material due to the fact that various optical and geometric states of the liquid crystalline (LC) phases are projected onto the polymeric constituents. The phase behavior, which refers to the macroscopic shape change of LCP under thermotropic phase change, is a compelling example of such optical-mechanical coupling. In this study, the photomechanical behavior, which broadly refers to the thermal- or light-induced actuation of smectic solids, is investigated using three-dimensional nonlinear finite element analysis (FEA). First, the various phases of LC are considered as well as their relation to polymeric conformation defined by the strain energy of the smectic polymer; a comprehensive constitutive equation that bridges the strong, optomechanical coupling is then derived. Such photomechanical coupling is incorporated in the FEA considering geometric nonlinearity, which is vital to understanding the large-scale light-induced bending behavior of the smectic solid.To demonstrate the simulation capability of the present model, numerous examples of photomechanical deformations are investigated parametrically, either by changing the operating conditions such as stimuli (postsynthesis) or the intrinsic properties (presynthesis). When compared to nematic solids, distinguished behaviors due to smectic substances are found herein and discussed through experiments. The quasisoftness that bidirectionally couples microscopic variables to mechanical behavior is also explained, while considering the effect of nonlinearity. In addition to providing a comprehensive measure that could deepen the knowledge of photomechanical coupling, the use of the proposed finite element framework offers an insight into the design of light-responsive actuating systems made of smectic solids.

  10. Light-induced symmetry breaking and related giant enhancement of nonlinear properties in CdZnTe:V crystals.

    Science.gov (United States)

    Shwartz, Sharon; Weil, Raoul; Segev, Mordechai; Lakin, Eugene; Zolotoyabko, Emil; Menon, Vinod M; Forrest, Stephen R; El-Hanany, Uri

    2006-10-02

    We report on enormous light-induced reversible strain effects in CdZnTe:V crystals, which lead to a remarkable enhancement of their nonlinear properties, such as electrostriction and electro-optic effects. Using both high resolution x-ray diffraction and optical interferometry we measure light-induced relative deformation of the initial crystalline lattice (changes in d-spacings) up to 0.15%. The experimental findings are attributed to light-induced breaking of the initial cubic crystalline symmetry. Our results point to a family of inorganic materials whose nonlinear properties can be remarkably enhanced by light, offering new possibilities for nonlinear frequency conversion, generation of Terahertz radiation, electro-optic modulation, and self-deflection of optical beams.

  11. Rapid earthquake detection through GPU-Based template matching

    Science.gov (United States)

    Mu, Dawei; Lee, En-Jui; Chen, Po

    2017-12-01

    The template-matching algorithm (TMA) has been widely adopted for improving the reliability of earthquake detection. The TMA is based on calculating the normalized cross-correlation coefficient (NCC) between a collection of selected template waveforms and the continuous waveform recordings of seismic instruments. In realistic applications, the computational cost of the TMA is much higher than that of traditional techniques. In this study, we provide an analysis of the TMA and show how the GPU architecture provides an almost ideal environment for accelerating the TMA and NCC-based pattern recognition algorithms in general. So far, our best-performing GPU code has achieved a speedup factor of more than 800 with respect to a common sequential CPU code. We demonstrate the performance of our GPU code using seismic waveform recordings from the ML 6.6 Meinong earthquake sequence in Taiwan.

  12. Coupled effects of director orientations and boundary conditions on light induced bending of monodomain nematic liquid crystalline polymer plates

    Science.gov (United States)

    You, Yue; Xu, Changwei; Ding, Shurong; Huo, Yongzhong

    2012-12-01

    A photo-chromic liquid crystal polymers (LCPs) is a smart material for large light-activated variation or bending to transfer luminous energy into mechanical energy. We study the light induced behavior by modeling planar and homeotropic nematic network polymer plates. We effectively illustrate some reported experimental outcomes and theoretically predict some possible bending patterns. This paper constructs an understanding between the bending behaviors and interactions among the alignments, aspect ratios and boundary conditions, etc. Our work provides information on optimizing light induced bending in the process of micro-opto-mechanical system (MOMS) design.

  13. Role of space charges on light-induced effects in nematic liquid crystals doped by methyl red.

    Science.gov (United States)

    Lucchetti, L; Simoni, F

    2014-03-01

    We show that both the extraordinarily large nonlinear response and the light-induced permanent reorientation in liquid crystals doped by the azo dye methyl red originates from the same phenomenon of modification of the charge density on the irradiated surface. The demonstration is done by applying ac voltage to the samples, showing that in this case no permanent anchoring is possible. The measurements confirm the role of photoisomerization that gives a transient contribution to the actual reorientation process only in the high dose regime. This result allows us to draw a picture for light-induced effects that might be applied to a large class of compounds.

  14. On the light-induced enhancement in photovoltaic performance of PEDOT:PSS/Si organic-inorganic hybrid solar cells

    Science.gov (United States)

    Chen, Jianhui; Yang, Linlin; Ge, Kunpeng; Chen, Bingbing; Shen, Yanjiao; Guo, Jianxin; Liu, Haixu; Xu, Ying; Fan, Jiandong; Mai, Yaohua

    2017-10-01

    Light-induced degradation has been identified to be a critical issue for most silicon-based solar cell technologies. This study presents an observation of an opposite light-induced enhancement (LIE) effect in photovoltaic performance in poly(3,4-ethylthiophene):polystyrenesulfonate/n-Si organic-inorganic hybrid solar cells. The reduced density of interface states under light soaking (LS) is found to be responsible for the LIE of the hybrid solar cells. An increased minor carrier lifetime under LS and a switchable photoluminescence intensity while applying a voltage bias are observed, providing evidence for the underlying physical mechanism.

  15. Design reflowable digital book template

    Science.gov (United States)

    Prasetya, Didik Dwi; Widiyaningtyas, Triyanna; Arifin, M. Zainal; Wahyu Sakti G., I.

    2017-09-01

    Electronic books (e-books or digital books) increasingly in demand and continue to grow in the form of future books. One of the standard format electronic books that potential is EPUB (electronic publication) published by the International Digital Publishing Forum (IDPF). This digital book has major advantages are able to provide interactive and reflowable content, which are not found in another book format, such as PDF. Reflowable content allows the book can be accessed through a variety of reader device, like desktop and mobile with a fit and comfort view. However, because the generating process of an EPUB digital book is not as easy a PDF, so this format is less popular. Therefore, in order to help overcome the existing problems, this paper develops digital reflowable text book templates to support electronic learning, especially in Indonesia. This template can be used by anyone to produce a standard digital book quickly and easily without requiring additional specialized knowledge.

  16. Future accelerators (?)

    Energy Technology Data Exchange (ETDEWEB)

    John Womersley

    2003-08-21

    I describe the future accelerator facilities that are currently foreseen for electroweak scale physics, neutrino physics, and nuclear structure. I will explore the physics justification for these machines, and suggest how the case for future accelerators can be made.

  17. User-Independent Recognition of Sports Activities From a Single Wrist-Worn Accelerometer: A Template-Matching-Based Approach.

    Science.gov (United States)

    Margarito, Jenny; Helaoui, Rim; Bianchi, Anna M; Sartor, Francesco; Bonomi, Alberto G

    2016-04-01

    To investigate the accuracy of template matching for classifying sports activities using the acceleration signal recorded with a wearable sensor. A population of 29 normal weight and 19 overweight subjects was recruited to perform eight common sports activities, while body movement was measured using a triaxial accelerometer placed at the wrist. User- and axis-independent acceleration signal templates were automatically extracted to represent each activity category and recognize activity types. Five different similarity measures between example signals and templates were compared: Euclidean distance, dynamic time warping (DTW), derivative DTW, correlation and an innovative index, and combining distance and correlation metrics ( Rce). Template-based activity recognition was compared to statistical-learning classifiers, such as Naïve Bayes, decision tree, logistic regression (LR), and artificial neural network (ANN) trained using time- and frequency-domain signal features. Each algorithm was tested on data from a holdout group of 15 normal weight and 19 overweight subjects. The Rce index outperformed other template-matching metrics by achieving recognition rate above 80% for the majority of the activities. Template matching showed robust classification accuracy when tested on unseen data and in case of limited training examples. LR and ANN achieved the highest overall recognition accuracy  ∼  85% but showed to be more vulnerable to misclassification error than template matching on overweight subjects' data. Template matching can be used to classify sports activities using the wrist acceleration signal. Automatically extracted template prototypes from the acceleration signal may be used to enhance accuracy and generalization properties of statistical-learning classifiers.

  18. Electronic structure of light-induced lophyl radical derived from a novel hexaarylbiimidazole with pi-conjugated chromophore.

    Science.gov (United States)

    Kikuchi, Azusa; Iyoda, Tomokazu; Abe, Jiro

    2002-07-21

    A novel photochromic hexaarylbiimidazole with a bithienyl group as an extended pi-conjugation unit was synthesized and the light-induced lophyl radical was found to be stabilized due to the delocalization of an unpaired electron, and to strongly absorb near-infrared light.

  19. Light-induced spatial separation of charges toward different crystal facets of square-like WO3.

    Science.gov (United States)

    Gong, Huihua; Ma, Ruirui; Mao, Fang; Liu, Kewei; Cao, Hongmei; Yan, Hongjian

    2016-09-29

    Light-induced preferential migration of electrons and holes to the minor (200) and (020) facets and the dominant (002) facets of square-like WO 3 , respectively, resulted in the square-like WO 3 nanoplates with Pt loaded mainly on dominant (002) facets shows higher photocatalytic activity than that Pt loaded on the minor facets.

  20. Light-induced EPR study of charge transfer in P3HT/bis-PCBM bulk heterojunctions

    National Research Council Canada - National Science Library

    Krinichnyi, Victor I; Yudanova, Eugenia I

    2011-01-01

    ... – 2.73 eV in bulk heterojunctions formed by poly(3-hexylthiophene) (P3HT) with bis(1-[3-(methoxycarbonyl)propyl]-1-phenyl)-[6.6]C62 (bis-PCBM) fullerene derivative have been studied by direct light-induced EPR...

  1. Light-induced space-charge fields for the structuration of dielectric materials; Lichtinduzierte Raumladungsfelder zur Strukturierung dielektrischer Materialien

    Energy Technology Data Exchange (ETDEWEB)

    Eggert, H.A.

    2006-11-15

    Light-induced space-charge fields in lithium-niobate crystals are used for patterning of dielectric materials. This includes tailored ferroelectric domains in the bulk of the crystal, different sorts of micro and nanoparticles on a crystal surface, as well as poling of electrooptic chromophores. A stochastical model is introduced, which can describe the spatial inhomogeneous domain inversion. (orig.)

  2. Direct characterization of ultraviolet-light-induced refractive index structures by scanning near-field optical microscopy

    DEFF Research Database (Denmark)

    Svalgaard, Mikael; Madsen, S.; Hvam, Jørn Märcher

    1998-01-01

    We have applied a reflection scanning near-field optical microscope to directly probe ultraviolet (UV)-light-induced refractive index structures in planar glass samples. This technique permits direct comparison between topography and refractive index changes (10(-5)-10(-3)) with submicrometer...... lateral resolution, The proposed method yields detailed information about the topography and index profiles of UV-written waveguides....

  3. Blue light-induced apoplastic acidification of Arabidopsis thaliana guard cells : Inhibition by ABA is mediated through protein phosphatases

    NARCIS (Netherlands)

    Roelfsema, MRG; Staal, M; Prins, HBA

    The phytohormone abscisic acid (ABA) inhibits blue light-induced apoplastic acidification of guard cells. The signal transduction pathway of ABA, mediating this response, was studied using ABA-insensitive (abi) mutants of Arapidopsis thaliana. Apoplastic acidification was monitored with a flat

  4. Mechanism of light induced water splitting in Photosystem II of oxygen evolving photosynthetic organisms.

    Science.gov (United States)

    Renger, Gernot

    2012-08-01

    The reactions of light induced oxidative water splitting were analyzed within the framework of the empirical rate constant-distance relationship of non-adiabatic electron transfer in biological systems (C. C. Page, C. C. Moser, X. Chen , P. L. Dutton, Nature 402 (1999) 47-52) on the basis of structure information on Photosystem II (PS II) (A. Guskov, A. Gabdulkhakov, M. Broser, C. Glöckner, J. Hellmich, J. Kern, J. Frank, W. Saenger, A. Zouni, Chem. Phys. Chem. 11 (2010) 1160-1171, Y. Umena, K. Kawakami, J-R Shen, N. Kamiya, Crystal structure of oxygen-evolving photosystem II at a resolution of 1.9Å. Nature 47 (2011) 55-60). Comparison of these results with experimental data leads to the following conclusions: 1) The oxidation of tyrosine Y(z) by the cation radical P680(+·) in systems with an intact water oxidizing complex (WOC) is kinetically limited by the non-adiabatic electron transfer step and the extent of this reaction is thermodynamically determined by relaxation processes in the environment including rearrangements of hydrogen bond network(s). In marked contrast, all Y(z)(ox) induced oxidation steps in the WOC up to redox state S(3) are kinetically limited by trigger reactions which are slower by orders of magnitude than the rates calculated for non-adiabatic electron transfer. 3) The overall rate of the triggered reaction sequence of Y(z)(ox) reduction by the WOC in redox state S(3) eventually leading to formation and release of O(2) is kinetically limited by an uphill electron transfer step. Alternative models are discussed for this reaction. The protein matrix of the WOC and bound water molecules provide an optimized dynamic landscape of hydrogen bonded protons for catalyzing oxidative water splitting energetically driven by light induced formation of the cation radical P680(+·). In this way the PS II core acts as a molecular machine formed during a long evolutionary process. This article is part of a Special Issue entitled: Photosynthesis Research

  5. Protective effects of soft acrylic yellow filter against blue light-induced retinal damage in rats.

    Science.gov (United States)

    Tanito, Masaki; Kaidzu, Sachiko; Anderson, Robert E

    2006-12-01

    Recently, a yellow intraocular lens (IOL) was developed for the purpose of reducing potential blue light-induced retinal damage after cataract surgery. However, the effect of yellow filters on retinal protection remains to be clarified. To test the protective effects of yellow filters on blue light-induced retinal damage, a yellow and a clear soft acrylic filter were attached to the right and left eyes, respectively, of albino rats and exposed to 4.5 k lux blue fluorescent lights with peak wavelength at 420 nm (ranging 380-500 nm; short blue) or 446 nm (ranging 400-540 nm; long blue) for 6h. To assess retinal damage, the electroretinogram (ERG) was recorded at 7 days, outer nuclear layer (ONL) thickness and area were measured at 7 days, apoptosis was analyzed by TUNEL staining at 24 h, and the level of lipid peroxidation in retinas was assessed by Western dot blots using specific antibodies against 4-hydroxynonenal (4-HNE)- and carboxyethylpyrrole (CEP)-modified proteins immediately after light exposure. After short blue light exposure, a- and b-wave ERG amplitudes and the ONL thickness at 1-2.5 mm inferior and 0.5-2.5 mm superior to optic nerve head (ONH) were significantly reduced. TUNEL staining in the ONL at 0-2 mm inferior and 1-2 mm superior to the ONH, and retinal levels of 4-HNE- and CEP-modified proteins were significantly increased in the clear filter-covered eyes compared to yellow filter-covered eyes. After long blue light exposure, the only difference seen was a greater ONL thickness at 1.5 mm superior to the ONH in yellow filter-covered eye. Transmission of light through the yellow filter was 58% for short blue and 89% for long blue compared to the clear filter. The ONL area was not different between clear filter-covered and -uncovered eyes after exposure to short or long blue light. Given the results, yellow IOL material protects the retina against acute shorter wavelength blue light exposure more effectively than the clear IOL material.

  6. The light-induced transcriptome of the zebrafish pineal gland reveals complex regulation of the circadian clockwork by light

    Science.gov (United States)

    Ben-Moshe, Zohar; Alon, Shahar; Mracek, Philipp; Faigenbloom, Lior; Tovin, Adi; Vatine, Gad D.; Eisenberg, Eli; Foulkes, Nicholas S.; Gothilf, Yoav

    2014-01-01

    Light constitutes a primary signal whereby endogenous circadian clocks are synchronized (‘entrained’) with the day/night cycle. The molecular mechanisms underlying this vital process are known to require gene activation, yet are incompletely understood. Here, the light-induced transcriptome in the zebrafish central clock organ, the pineal gland, was characterized by messenger RNA (mRNA) sequencing (mRNA-seq) and microarray analyses, resulting in the identification of multiple light-induced mRNAs. Interestingly, a considerable portion of the molecular clock (14 genes) is light-induced in the pineal gland. Four of these genes, encoding the transcription factors dec1, reverbb1, e4bp4-5 and e4bp4-6, differentially affected clock- and light-regulated promoter activation, suggesting that light-input is conveyed to the core clock machinery via diverse mechanisms. Moreover, we show that dec1, as well as the core clock gene per2, is essential for light-entrainment of rhythmic locomotor activity in zebrafish larvae. Additionally, we used microRNA (miRNA) sequencing (miR-seq) and identified pineal-enhanced and light-induced miRNAs. One such miRNA, miR-183, is shown to downregulate e4bp4-6 mRNA through a 3′UTR target site, and importantly, to regulate the rhythmic mRNA levels of aanat2, the key enzyme in melatonin synthesis. Together, this genome-wide approach and functional characterization of light-induced factors indicate a multi-level regulation of the circadian clockwork by light. PMID:24423866

  7. Functional Programming with C++ Template Metaprograms

    Science.gov (United States)

    Porkoláb, Zoltán

    Template metaprogramming is an emerging new direction of generative programming. With the clever definitions of templates we can force the C++ compiler to execute algorithms at compilation time. Among the application areas of template metaprograms are the expression templates, static interface checking, code optimization with adaption, language embedding and active libraries. However, as template metaprogramming was not an original design goal, the C++ language is not capable of elegant expression of metaprograms. The complicated syntax leads to the creation of code that is hard to write, understand and maintain. Although template metaprogramming has a strong relationship with functional programming, this is not reflected in the language syntax and existing libraries. In this paper we give a short and incomplete introduction to C++ templates and the basics of template metaprogramming. We will enlight the role of template metaprograms, and some important and widely used idioms. We give an overview of the possible application areas as well as debugging and profiling techniques. We suggest a pure functional style programming interface for C++ template metaprograms in the form of embedded Haskell code which is transformed to standard compliant C++ source.

  8. Dynamic Compilation of C++ Template Code

    Directory of Open Access Journals (Sweden)

    Martin J. Cole

    2003-01-01

    Full Text Available Generic programming using the C++ template facility has been a successful method for creating high-performance, yet general algorithms for scientific computing and visualization. However, adding template code tends to require more template code in surrounding structures and algorithms to maintain generality. Compiling all possible expansions of these templates can lead to massive template bloat. Furthermore, compile-time binding of templates requires that all possible permutations be known at compile time, limiting the runtime extensibility of the generic code. We present a method for deferring the compilation of these templates until an exact type is needed. This dynamic compilation mechanism will produce the minimum amount of compiled code needed for a particular application, while maintaining the generality and performance that templates innately provide. Through a small amount of supporting code within each templated class, the proper templated code can be generated at runtime without modifying the compiler. We describe the implementation of this goal within the SCIRun dataflow system. SCIRun is freely available online for research purposes.

  9. I - Template Metaprogramming for Massively Parallel Scientific Computing - Expression Templates

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Large scale scientific computing raises questions on different levels ranging from the fomulation of the problems to the choice of the best algorithms and their implementation for a specific platform. There are similarities in these different topics that can be exploited by modern-style C++ template metaprogramming techniques to produce readable, maintainable and generic code. Traditional low-level code tend to be fast but platform-dependent, and it obfuscates the meaning of the algorithm. On the other hand, object-oriented approach is nice to read, but may come with an inherent performance penalty. These lectures aim to present he basics of the Expression Template (ET) idiom which allows us to keep the object-oriented approach without sacrificing performance. We will in particular show to to enhance ET to include SIMD vectorization. We will then introduce techniques for abstracting iteration, and introduce thread-level parallelism for use in heavy data-centric loads. We will show to to apply these methods i...

  10. Light-induced charge transport processes in photorefractive barium titanate doped with rhodium and iron

    Science.gov (United States)

    van Stevendaal, U.; Buse, K.; Kämper, S.; Hesse, H.; Krätzig, E.

    1996-10-01

    Absorption, light-induced absorption changes, photo and dark conductivities, bulk photovoltaic currents and two-beam coupling gain coefficients are measured for oxidized, as grown and reduced BaTiO3:Rh,Fe crystals. The oxidized sample shows hole conductivity and three photorefractive levels are present: Rh4+/5+ Fe4+/5+ and Rh3+/4+. The measurements indicate that Rh3+/4+ is responsible for the photo conductivity and that its energy level is located (0.9 ± 0.1) eV above the valence band edge. The as grown sample also shows hole conductivity and two photorefractive levels are involved: Rh3+/4+ and Fe 3+/4+. The results yield that the Fe3+/4+ level is located (0.95 ± 0.05) eV above the valence band edge. In the reduced sample electrons are the dominant charge carriers and two levels are of importance. The shallow one is located (0.39 ± 0.05) eV below the conduction band edge. Here the performance of this crystal is strongly impaired by a pronounced sublinear photo conductivity.

  11. Directing the path of light-induced electron transfer at a molecular fork using vibrational excitation

    Science.gov (United States)

    Delor, Milan; Archer, Stuart A.; Keane, Theo; Meijer, Anthony J. H. M.; Sazanovich, Igor V.; Greetham, Gregory M.; Towrie, Michael; Weinstein, Julia A.

    2017-11-01

    Ultrafast electron transfer in condensed-phase molecular systems is often strongly coupled to intramolecular vibrations that can promote, suppress and direct electronic processes. Recent experiments exploring this phenomenon proved that light-induced electron transfer can be strongly modulated by vibrational excitation, suggesting a new avenue for active control over molecular function. Here, we achieve the first example of such explicit vibrational control through judicious design of a Pt(II)-acetylide charge-transfer donor-bridge-acceptor-bridge-donor 'fork' system: asymmetric 13C isotopic labelling of one of the two -C≡C- bridges makes the two parallel and otherwise identical donor→acceptor electron-transfer pathways structurally distinct, enabling independent vibrational perturbation of either. Applying an ultrafast UVpump(excitation)-IRpump(perturbation)-IRprobe(monitoring) pulse sequence, we show that the pathway that is vibrationally perturbed during UV-induced electron transfer is dramatically slowed down compared to its unperturbed counterpart. One can thus choose the dominant electron transfer pathway. The findings deliver a new opportunity for precise perturbative control of electronic energy propagation in molecular devices.

  12. Basic study on isotope separation using light induced drift effects (Progress report)

    Energy Technology Data Exchange (ETDEWEB)

    Suto, Osamu; Yamaguchi, Hiromi; Suzuki, M. [Japan Nuclear Cycle Development Inst., Tokai, Ibaraki (Japan). Tokai Works; Ishii, K.

    1999-03-01

    As a preliminary research on {sup 15}N-isotope separation on the basis of light induced drift (LID) effects in NH{sub 3}, the authors have confirmed the feasibility on {sup 13}C-isotope separation using LID effects in CH{sub 3}F for which all the necessary spectroscopic data are available and found that: (1) Concentration difference at the entrance and at the exit end of the drift tube {delta}n{sub a} (number/cm{sup 3}) was proportional to the energy density absorbed ({delta}W/cm{sup 2}), indicating the validity of theoretical LID equation. (2) Pressure dependence of {delta}n{sub a}/{delta}S was maximum at ca. 0.5 Torr. Lower {delta}n{sub a}/{delta}S values are due to power saturation effects at low pressures and due to absorption line broadening at high pressures. (3) Maximum isotopic selectivity was obtained at 0.5 Torr and to be 1.18. (4) Time needed for {delta}n{sub a} to attain the equilibrium increased with increasing pressure. They concluded that the possibility of {sup 15}N isotope separation using NH{sub 3}-LID effect was in principle confirmed. (S. Ohno)

  13. Assessing the Association between Oral Hygiene and Preterm Birth by Quantitative Light-Induced Fluorescence

    Directory of Open Access Journals (Sweden)

    Christopher K. Hope

    2014-01-01

    Full Text Available The aim of this study was to investigate the purported link between oral hygiene and preterm birth by using image analysis tools to quantify dental plaque biofilm. Volunteers (n=91 attending an antenatal clinic were identified as those considered to be “at high risk” of preterm delivery (i.e., a previous history of idiopathic preterm delivery, case group or those who were not considered to be at risk (control group. The women had images of their anterior teeth captured using quantitative light-induced fluorescence (QLF. These images were analysed to calculate the amount of red fluorescent plaque (ΔR% and percentage of plaque coverage. QLF showed little difference in ΔR% between the two groups, 65.00% case versus 68.70% control, whereas there was 19.29% difference with regard to the mean plaque coverage, 25.50% case versus 20.58% control. A logistic regression model showed a significant association between plaque coverage and case/control status (P=0.031, controlling for other potential predictor variables, namely, smoking status, maternal age, and body mass index (BMI.

  14. A visible light-induced photocatalytic silver enhancement reaction for gravimetric biosensors

    Science.gov (United States)

    Ko, Wooree; Yim, Changyong; Jung, Namchul; Joo, Jinmyoung; Jeon, Sangmin; Seo, Hyejung; Lee, Soo Suk; Park, Jae Chan

    2011-10-01

    We have developed a novel microgravimetric immunosensor using a WO3 nanoparticle-modified immunoassay and a silver enhancement reaction. When the nanoparticles in silver ion solution (i.e. AgNO3) are exposed to visible light, the silver ions are photocatalytically reduced and form a metallic silver coating on the nanoparticles. This silver coating consequently induces changes in the mass and light absorption spectrum. Although photocatalytic reduction reactions can be achieved using ultraviolet (UV) light and TiO2 nanoparticles as described in our previous publication (Seo et al 2010 Nanotechnology 21 505502), the use of UV light in biosensing applications has drawbacks in that UV light can damage proteins. In addition, conventional quartz crystal substrates must be passivated to prevent undesirable silver ion reduction on their gold-coated sensing surfaces. We addressed these problems by adopting a visible light-induced photocatalytic silver enhancement method using WO3 nanoparticles and lateral field excited (LFE) quartz crystals. As a proof-of-concept demonstration of the technique, streptavidin was adsorbed onto an LFE quartz crystal, and its mass was enhanced with biotinylated WO3 nanoparticles, this being followed by a photocatalytic silver enhancement reaction. The mass change due to the enhancement was found to be > 30 times greater than the mass change obtained with the streptavidin alone.

  15. The Role of Fe2O3 and Light Induced on Dielectric Properties of Borosilicate Glass

    Science.gov (United States)

    Diantoro, Markus; Prastiwi, Norma Dian; Taufiq, Ahmad; Hidayat, Nurul; Mufti, Nandang; Hidayat, Arif

    2017-05-01

    Functionally glass materials have been widely applied in various technological applications remarkably due to their optoelectric properties. In this present study, the glass was prepared from leaching product of local silica sands. Bi2O3 and Na2CO3 were added to reduce the melting point of silica sand to form silica glass and Fe2O3/B2O3 was incorporated to examine its effect on the crystal structure, morphology, and light-induced dielectric properties of the borosilicate-based fuctional glass. The characterizations were conducted by means of Differential Thermal Analyses (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and capacitance meter under the influence of light intensity. The XRD pattern shows the absence of any sharp diffraction peak indicates the amorphous state of the borosilicate glass. While the SEM image shows that the borosilicate glass exhibited amorphous characteristic. Furthermore, the increasing of Fe2O3 tends to reduce the dielectric constant. On the other hand, the increase of light intensity increase the dielectric constant with a step like properties.

  16. Nucleophile sensitivity of Drosophila TRPA1 underlies light-induced feeding deterrence

    Science.gov (United States)

    Du, Eun Jo; Ahn, Tae Jung; Wen, Xianlan; Seo, Dae-Won; Na, Duk L; Kwon, Jae Young; Choi, Myunghwan; Kim, Hyung-Wook; Cho, Hana; Kang, KyeongJin

    2016-01-01

    Solar irradiation including ultraviolet (UV) light causes tissue damage by generating reactive free radicals that can be electrophilic or nucleophilic due to unpaired electrons. Little is known about how free radicals induced by natural sunlight are rapidly detected and avoided by animals. We discover that Drosophila Transient Receptor Potential Ankyrin 1 (TRPA1), previously known only as an electrophile receptor, sensitively detects photochemically active sunlight through nucleophile sensitivity. Rapid light-dependent feeding deterrence in Drosophila was mediated only by the TRPA1(A) isoform, despite the TRPA1(A) and TRPA1(B) isoforms having similar electrophile sensitivities. Such isoform dependence re-emerges in the detection of structurally varied nucleophilic compounds and nucleophilicity-accompanying hydrogen peroxide (H2O2). Furthermore, these isoform-dependent mechanisms require a common set of TRPA1(A)-specific residues dispensable for electrophile detection. Collectively, TRPA1(A) rapidly responds to natural sunlight intensities through its nucleophile sensitivity as a receptor of photochemically generated radicals, leading to an acute light-induced behavioral shift in Drosophila. DOI: http://dx.doi.org/10.7554/eLife.18425.001 PMID:27656903

  17. Light-induced oxidative stress, N-formylkynurenine, and oxygenic photosynthesis.

    Directory of Open Access Journals (Sweden)

    Tina M Dreaden Kasson

    Full Text Available Light stress in plants results in damage to the water oxidizing reaction center, photosystem II (PSII. Redox signaling, through oxidative modification of amino acid side chains, has been proposed to participate in this process, but the oxidative signals have not yet been identified. Previously, we described an oxidative modification, N-formylkynurenine (NFK, of W365 in the CP43 subunit. The yield of this modification increases under light stress conditions, in parallel with the decrease in oxygen evolving activity. In this work, we show that this modification, NFK365-CP43, is present in thylakoid membranes and may be formed by reactive oxygen species produced at the Mn(4CaO(5 cluster in the oxygen-evolving complex. NFK accumulation correlates with the extent of photoinhibition in PSII and thylakoid membranes. A modest increase in ionic strength inhibits NFK365-CP43 formation, and leads to accumulation of a new, light-induced NFK modification (NFK317 in the D1 polypeptide. Western analysis shows that D1 degradation and oligomerization occur under both sets of conditions. The NFK modifications in CP43 and D1 are found 17 and 14 Angstrom from the Mn(4CaO(5 cluster, respectively. Based on these results, we propose that NFK is an oxidative modification that signals for damage and repair in PSII. The data suggest a two pathway model for light stress responses. These pathways involve differential, specific, oxidative modification of the CP43 or D1 polypeptides.

  18. Transient light-induced absorption in thermally reduced, periodically poled lithium niobate doped with yttrium

    Energy Technology Data Exchange (ETDEWEB)

    Schoke, Bettina; Imlau, Mirco [Physics Department, University of Osnabrueck (Germany); Merschjann, Christoph [Helmholtz-Zentrum GmbH, Berlin (Germany); Corradi, Garbor; Polgar, Katalin [Research Institute for Solid State Physics and Optics, Hungarian Academy of Sciences, Budapest (Hungary); Naumova, Inna [Physics Department, Moscow State University (Russian Federation)

    2010-07-01

    Excitation and recombination processes of small polarons are studied in thermally reduced, periodically poled LiNbO{sub 3} doped with Y (PPLN:Y). The reduction treatment creates bipolarons (Nb{sup 4+}{sub Li}:Nb{sup 4+}{sub Nb}) which are stable at room temperature. They may be dissociated optically into small bound (Nb{sub Li}{sup 4+}) and free (Nb{sub Nb}{sup 4+}) polarons (''optical gating''). The light-induced absorption arising from the population and depopulation of these centers is measured time-resolved via transient absorption spectroscopy in the blue and red spectral range after optical excitation with intense laser pulses ({lambda}=532 nm, t=8 ns). Besides dissociation and relaxation of bipolarons the investigations also indicate the presence of photo-induced hole polarons (O{sup -}) with comparatively longer lifetime. The findings can be explained by a periodic spatial modulation of the Nb{sub Li}{sup 5+} antisite concentration and of the degree of reduction. Both modulations most likely result from a periodic incorporation of Y ions on Li sites.

  19. Mechanisms for light induced degradation in MAPbI3 perovskite thin films and solar cells

    Science.gov (United States)

    Abdelmageed, Ghada; Jewell, Leila; Hellier, Kaitlin; Seymour, Lydia; Luo, Binbin; Bridges, Frank; Zhang, Jin Z.; Carter, Sue

    2016-12-01

    Organometal halide perovskites are highly promising materials for photovoltaic applications, yet their rapid degradation remains a significant challenge. Here, the light-induced structural degradation mechanism of methylammonium lead iodide (MAPbI3) perovskite films and devices is studied in low humidity environment using X-Ray Diffraction, Ultraviolet-Visible (UV-Vis) absorption spectroscopy, Extended X-ray Absorption Fine Structure spectroscopy, Fourier Transform Infrared spectroscopy, and device measurements. Under dry conditions, the perovskite film degrades only in the presence of both light and oxygen, which together induce the formation of halide anions through donation of electrons to the surrounding oxygen. The halide anions generate free radicals that deprotonate the methylammonium cation and form the highly volatile CH3NH2 molecules that escape and leave pure PbI2 behind. The device findings show that changes in the local structure at the TiO2 mesoporous layer occur with light, even in the absence of oxygen, and yet such changes can be prevented by the application of UV blocking layer on the cells. Our results indicate that the stability of mp-TiO2-MAPbI3 photovoltaics can be dramatically improved with effective encapsulation that protects the device from UV light, oxygen, and moisture.

  20. Light-induced fading of the PSL signal from irradiated herbs and spices

    Energy Technology Data Exchange (ETDEWEB)

    Alberti, A. [ISOF-CNR, Via P. Gobetti 101, 40129 Bologna (Italy); Corda, U. [ISOF-CNR, Via P. Gobetti 101, 40129 Bologna (Italy); Fuochi, P. [ISOF-CNR, Via P. Gobetti 101, 40129 Bologna (Italy)]. E-mail: fuochi@isof.cnr.it; Bortolin, E. [Istituto Superiore di Sanita, Viale Regina Elena 299, 00161 Rome (Italy); Calicchia, A. [Istituto Superiore di Sanita, Viale Regina Elena 299, 00161 Rome (Italy); Onori, S. [Istituto Superiore di Sanita, Viale Regina Elena 299, 00161 Rome (Italy)

    2007-08-15

    Reliability of the photo-stimulated luminescence (PSL) technique, as screening method for irradiated food identification, has been tested with three kinds of herbs and spices (oregano, red pepper and fennel), prepared in two different ways (granular: i.e. seeds and flakes, or powdered), over a long period of storage with different light exposures. The irradiated samples kept in the dark gave always a positive response (the sample is correctly classified as 'irradiated') for the overall examination period. The samples kept under ambient light conditions, in typical commercial glass containers, exhibited a reduction of the PSL signal, more or less pronounced depending on the type of food and packaging. The different PSL response of the irradiated samples is to be related to the quantity and quality of the mineral debris present in the individual food. It was also found that, for the same type of food, the light-induced fading was much stronger for the flaked and seed samples than for the corresponding powder samples, the penetrating capability of light being much more inhibited in powdered than in whole seeds or flaked form samples. The observed light bleaching of the PSL signal in irradiated herbs and spices is of practical relevance since it may lead to false negative classifications.

  1. Distribution of the early light-inducible protein in the thylakoids of developing pea chloroplasts.

    Science.gov (United States)

    Cronshagen, U; Herzfeld, F

    1990-10-24

    The distribution of the early light-inducible protein (ELIP) of pea (Pisum sativum) between grana and stroma thylakoids was studied. An antibody raised against a bacterial-expressed fusion protein containing ELIP sequences was used. Illumination of dark-grown pea seedlings causes an accumulation of the ELIP in the thylakoid membranes with a maximum level at 16 h. During continuous illumination exceeding 16 h the level decreases again. The fractionation of thylakoid membranes of 48-h-illuminated pea seedlings in grana and stroma thylakoids reveals that there is no uniform distribution of ELIP in the thylakoids. Rather 60-70% of ELIP was found in the stroma thylakoids and 30-40% in the grana thylakoids. This distribution is in accordance with that of photosystem I but not with that of photosystem II. After Triton-X-100 solubilization almost all ELIP is found in the photosystem-I-containing fraction. This also supports an association of ELIP with photosystem I.

  2. Pilot clinical study to assess caries lesion activity using quantitative light-induced fluorescence during dehydration

    Science.gov (United States)

    Ando, Masatoshi; Ferreira-Zandoná, Andrea G.; Eckert, George J.; Zero, Domenick T.; Stookey, George K.

    2017-03-01

    This study aimed to evaluate the ability of quantitative light-induced fluorescence (QLF) to assess caries lesion activity using visual examination (VE) as the gold standard. Twenty-four visible white spot lesions on buccal surfaces were examined from 23 children, ages 9 to 14 years. At baseline, the surface was hydrated with water, and thereafter, it was dehydrated with continuous compressed air during image acquisition. QLF images were acquired at 0 (baseline), 5, and 15 s. QLF variables [QLFV: fluorescence loss (ΔF), lesion size (S), ΔQ: ΔF×S] was recorded. Changes-in-QLFV per second (ΔQLFV) were determined: ΔQLFV=(QLFVN-QLF/N), where N indicates dehydration time. One experienced dentist conducted VE independently using a dental unit's light, compressed air, and explorer. QLFV and ΔQLFV of the active group (n=11) were compared with those of the inactive group (n=13) using two-sample t-tests. As the surface was dehydrated, S and ΔQ values of the active group increased, whereas QLFV of the inactive group showed only a small change. ΔQLFV of the active group were larger than those of the inactive group; however, the difference did not reach statistical significance (p>0.11). Within the limitations of this study, QLF data indicated increments for lesions designated as active and minimal change for lesions defined as inactive.

  3. Microsecond light-induced proton transfer to flavin in the blue light sensor plant cryptochrome.

    Science.gov (United States)

    Langenbacher, Thomas; Immeln, Dominik; Dick, Bernhard; Kottke, Tilman

    2009-10-14

    Plant cryptochromes are blue light photoreceptors that regulate key responses in growth and daily rhythm of plants and might be involved in magnetoreception. They show structural homology to the DNA repair enzyme photolyase and bind flavin adenine dinucleotide as chromophore. Blue light absorption initiates the photoreduction from the oxidized dark state of flavin to the flavin neutral radical, which is the signaling state of the sensor. Previous time-resolved studies of the photoreduction process have been limited to observation of the decay of the radical in the millisecond time domain. We monitored faster, light-induced changes in absorption of an algal cryptochrome covering a spectral range of 375-750 nm with a streak camera setup. Electron transfer from tryptophan to flavin is completed before 100 ns under formation of the flavin anion radical. Proton transfer takes place with a time constant of 1.7 micros leading to the flavin neutral radical. Finally, the flavin radical and a tryptophan neutral radical decay with a time constant >200 micros in the millisecond and second time domain. The microsecond proton transfer has not been observed in animal cryptochromes from insects or photolyases. Furthermore, the strict separation in time of electron and proton transfer is novel in the field of flavin-containing photoreceptors. The reaction rate implies that the proton donor is not in hydrogen bonding distance to the flavin N5. Potential candidates for the proton donor and the involvement of the tryptophan triad are discussed.

  4. Mechanism of the fluorescent light induced suppression of Curly phenotype in Drosophila melanogaster.

    Science.gov (United States)

    Pavelka, J; Jindrák, L

    2001-09-01

    A dominant mutation Curly (Cy), frequently used as a marker on the second chromosome in Drosophila melanogaster, was previously shown to be suppressed by several factors, including larval crowding, low temperature, and fluorescent light. While the first two factors affect this mutation only partially, fluorescent tube exposed flies exhibit an almost completely suppressed (wild type) phenotype. This suppressive effect is the result of a combination of the electric field and light, both factors being produced by common fluorescent tubes. In this study, experiments were carried out to clarify the basic mechanism of this unique phenomenon. Two fluorescent tube sensitive stages of Drosophila development were found in the second half of embryonic development and first half of the pupal stage. Riboflavin, which is administered to Drosophila larvae with yeast, and decomposed by light, seems to play a key role in this phenomenon. In a medium lacking riboflavin caused by light exposure, Cy expression is inhibited by the action of electric field. Positive results of experiments with lithium ions, which block the opening of Ca(2+) channels, support the hypothesis that electromagnetic fields may alter ion currents during ontogenic development of Drosophila, and thus influence, expression of the Cy gene. Also, fluorescent light induces an overexpression of a specific protein in the imaginal wing disc of Cy pupae. Copyright 2001 Wiley-Liss, Inc.

  5. Quantitative light-induced fluorescence images and digital photographs - Reproducibility of manually marked demineralisations.

    Science.gov (United States)

    Tatano, Rosalia; Ehrlich, Eva E; Berkels, Benjamin; Sirazitdinova, Ekaterina; Deserno, Thomas M; Fritz, Ulrike B

    2017-03-01

    Hard tooth tissue demineralisation is an undesirable side effect of orthodontic treatment with fixed appliances. Whereas both clinically and in digital photographs (DP), demineralisations appear as white spot lesions, WSLs appear as dark areas when quantitative light-induced fluorescence (QLF) imaging is used. This study aims at comparing the reproducibility of the detection of decalcified tooth areas in DP and QLF. DP and QLF pairs were acquired from 139 teeth of 32 patients after braces removal. Three raters manually marked the decalcified area on both DP and QLF images. The markings were repeated after 2 weeks. A ground truth was estimated for each tooth and modality using the simultaneous truth and performance level estimation (STAPLE) algorithm. The Dice coefficients (DC) of each rater marking to the ground truth were calculated for all teeth and modalities to quantify the spatial agreement. A three-way repeated measures analysis of variance (ANOVA) was used to compare the means of the DCs for both modalities ([Formula: see text]). Intra-observer and intercycle variabilities were assessed comparing the means across the raters and the cycles for both modalities. ANOVA revealed a statistical significant difference between the modalities [[Formula: see text], [Formula: see text

  6. Reduction of Light-Induced Anthocyanin Accumulation in Inoculated Sorghum Mesocotyls1

    Science.gov (United States)

    Lo, Sze-Chung Clive; Nicholson, Ralph L.

    1998-01-01

    Sorghum (Sorghum bicolor L. Moench) accumulates the anthocyanin cyanidin 3-dimalonyl glucoside in etiolated mesocotyls in response to light. Inoculation with the nonpathogenic fungus Cochliobolus heterostrophus drastically reduced the light-induced accumulation of anthocyanin by repressing the transcription of the anthocyanin biosynthesis genes encoding flavanone 3-hydroxylase, dihydroflavonol 4-reductase, and anthocyanidin synthase. In contrast to these repression effects, fungal inoculation resulted in the synthesis of the four known 3-deoxyanthocyanidin phytoalexins and a corresponding activation of genes encoding the key branch-point enzymes in the phenylpropanoid pathway, phenylalanine ammonia-lyase and chalcone synthase. In addition, a gene encoding the pathogenesis-related protein PR-10 was strongly induced in response to inoculation. The accumulation of phytoalexins leveled off by 48 h after inoculation and was accompanied by a more rapid increase in the rate of anthocyanin accumulation. The results suggest that the plant represses less essential metabolic activities such as anthocyanin synthesis as a means of compensating for the immediate biochemical and physiological needs for the defense response. PMID:9501130

  7. Light induced uptake of NO{sub 2} on submicron humic acid aerosol

    Energy Technology Data Exchange (ETDEWEB)

    Kleffmann, Joerg; Elshorbany, Yasin [Bergische Universitaet Wuppertal (Germany); Ammann, Markus; Stemmler, Konrad [Paul Scherrer Institut, Villigen (Switzerland); Bohn, Birger [Forschungszentrum Juelich (Germany); George, Christian; Ndour, Marieme [University Claude Bernard, (UCBL-CNRS), Villeurbanne (France)

    2007-07-01

    Recent field studies have demonstrated that the contribution of HONO to the OH radical production during daytime has been underestimated and indicated the existence of strong photolytic sources of HONO. A potential source is the light induced heterogeneous conversion of NO{sub 2} into HONO on humic acid surfaces, which was recently investigated on bulk surfaces. In the present laboratory study, we extended these studies to humic acid aerosols, which were generated by a nebulizer. The aerosol was transferred into a flow reactor and irradiated (300-700 nm) under controlled atmospheric conditions (humidity, NO{sub 2} concentration, etc.). HONO was detected using a selective and sensitive instrument (LOPAP), while the particle surface was quantified by a SMPS and an electrostatic precipitator. Similar to our recent study on bulk surfaces, a clearly photoinduced formation of HONO was observed, which was linear correlated with the aerosol surface and the reaction time. The experimental results are compared with the bulk study and a mechanism is presented to explain the experimental observations. In addition, the contribution to the primary production of OH radicals in the atmosphere is estimated.

  8. A visible light-induced photocatalytic silver enhancement reaction for gravimetric biosensors

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Wooree; Yim, Changyong; Jung, Namchul; Joo, Jinmyoung; Jeon, Sangmin [Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang (Korea, Republic of); Seo, Hyejung; Lee, Soo Suk; Park, Jae Chan, E-mail: jeons@postech.ac.kr [Samsung Advanced Institute of Technology (SAIT), Suwon (Korea, Republic of)

    2011-10-07

    We have developed a novel microgravimetric immunosensor using a WO{sub 3} nanoparticle-modified immunoassay and a silver enhancement reaction. When the nanoparticles in silver ion solution (i.e. AgNO{sub 3}) are exposed to visible light, the silver ions are photocatalytically reduced and form a metallic silver coating on the nanoparticles. This silver coating consequently induces changes in the mass and light absorption spectrum. Although photocatalytic reduction reactions can be achieved using ultraviolet (UV) light and TiO{sub 2} nanoparticles as described in our previous publication (Seo et al 2010 Nanotechnology 21 505502), the use of UV light in biosensing applications has drawbacks in that UV light can damage proteins. In addition, conventional quartz crystal substrates must be passivated to prevent undesirable silver ion reduction on their gold-coated sensing surfaces. We addressed these problems by adopting a visible light-induced photocatalytic silver enhancement method using WO{sub 3} nanoparticles and lateral field excited (LFE) quartz crystals. As a proof-of-concept demonstration of the technique, streptavidin was adsorbed onto an LFE quartz crystal, and its mass was enhanced with biotinylated WO{sub 3} nanoparticles, this being followed by a photocatalytic silver enhancement reaction. The mass change due to the enhancement was found to be > 30 times greater than the mass change obtained with the streptavidin alone.

  9. Fluorescent light induces neurodegeneration in the rodent nigrostriatal system but near infrared LED light does not.

    Science.gov (United States)

    Romeo, Stefania; Vitale, Flora; Viaggi, Cristina; di Marco, Stefano; Aloisi, Gabriella; Fasciani, Irene; Pardini, Carla; Pietrantoni, Ilaria; Di Paolo, Mattia; Riccitelli, Serena; Maccarone, Rita; Mattei, Claudia; Capannolo, Marta; Rossi, Mario; Capozzo, Annamaria; Corsini, Giovanni U; Scarnati, Eugenio; Lozzi, Luca; Vaglini, Francesca; Maggio, Roberto

    2017-05-01

    We investigated the effects of continuous artificial light exposure on the mouse substantia nigra (SN). A three month exposure of C57Bl/6J mice to white fluorescent light induced a 30% reduction in dopamine (DA) neurons in SN compared to controls, accompanied by a decrease of DA and its metabolites in the striatum. After six months of exposure, neurodegeneration progressed slightly, but the level of DA returned to the basal level, while the metabolites increased with respect to the control. Three month exposure to near infrared LED light (∼710nm) did not alter DA neurons in SN, nor did it decrease DA and its metabolites in the striatum. Furthermore mesencephalic cell viability, as tested by [3H]DA uptake, did not change. Finally, we observed that 710nm LED light, locally conveyed in the rat SN, could modulate the firing activity of extracellular-recorded DA neurons. These data suggest that light can be detrimental or beneficial to DA neurons in SN, depending on the source and wavelength. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Use of quantitative light-induced fluorescence to monitor tooth whitening

    Science.gov (United States)

    Amaechi, Bennett T.; Higham, Susan M.

    2001-04-01

    The changing of tooth shade by whitening agents occurs gradually. Apart from being subjective and affected by the conditions of the surroundings, visual observation cannot detect a very slight change in tooth color. An electronic method, which can communicate the color change quantitatively, would be more reliable. Quantitative Light- induced Fluorescence (QLF) was developed to detect and assess dental caries based on the phenomenon of change of autofluorescence of a tooth by demineralization. However, stains on the tooth surface exhibit the same phenomenon, and therefore QLF can be used to measure the percentage fluorescence change of stained enamel with respect to surrounding unstained enamel. The present study described a technique of assessing the effect of a tooth-whitening agent using QLF. This was demonstrated in two experiments in which either wholly or partially stained teeth were whitened by intermittent immersion in sodium hypochlorite. Following each immersion, the integrated fluorescence change due to the stain was quantified using QLF. In either situation, the value of (Delta) Q decreased linearly as the tooth regained its natural shade. It was concluded that gradual changing of the shade of discolored teeth by a whitening agent could be quantified using QLF.

  11. Quantification of Canine Dental Plaque Using Quantitative Light-Induced Fluorescence.

    Science.gov (United States)

    Wallis, Corrin; Gill, Yadvinder; Colyer, Alison; Davis, Ian; Allsopp, Judi; Komarov, Gleb; Higham, Susan; Harris, Stephen

    2016-03-01

    The aim of this work was to evaluate Quantitative Light-induced Fluorescence (QLF) as an alternative to the established Logan and Boyce method for determining plaque coverage of dogs' teeth. In a series of studies in conscious and anesthetized dogs, QLF showed good intra-photographer repeatability (coefficient of variation [CV] of 7.5% for undisclosed teeth) and inter-photographer reproducibility (CV of 3.2% for undisclosed teeth and 8.5% for disclosed teeth). The QLF software accurately identifies areas of plaque as demonstrated by comparison to the variability of 5 human scorers, manually marking plaque on QLF-acquired images (P = 0.1). There was good agreement with the modified Logan and Boyce method in the percentage reduction in plaque accumulation measured when dogs were fed an oral care chew versus no chew. To see a 15% difference in plaque accumulation, which is considered sufficient by the Veterinary Oral Health Council to differentiate between 2 treatments, a retrospective power analysis (90%) of the data established that only 7 dogs would be required, compared to 19 dogs for the modified Logan and Boyce method. QLF is a reliable method for measuring dental plaque in dogs with the added advantage that it is not subjective and requires fewer animals.

  12. Fast and efficient synthesis of microporous polymer nanomembranes via light-induced click reaction.

    Science.gov (United States)

    An, Qi; Hassan, Youssef; Yan, Xiaotong; Krolla-Sidenstein, Peter; Mohammed, Tawheed; Lang, Mathias; Bräse, Stefan; Tsotsalas, Manuel

    2017-01-01

    Conjugated microporous polymers (CMPs) are materials of low density and high intrinsic porosity. This is due to the use of rigid building blocks consisting only of lightweight elements. These materials are usually stable up to temperatures of 400 °C and are chemically inert, since the networks are highly crosslinked via strong covalent bonds, making them ideal candidates for demanding applications in hostile environments. However, the high stability and chemical inertness pose problems in the processing of the CMP materials and their integration in functional devices. Especially the application of these materials for membrane separation has been limited due to their insoluble nature when synthesized as bulk material. To make full use of the beneficial properties of CMPs for membrane applications, their synthesis and functionalization on surfaces become increasingly important. In this respect, we recently introduced the solid liquid interfacial layer-by-layer (LbL) synthesis of CMP-nanomembranes via Cu catalyzed azide-alkyne cycloaddition (CuAAC). However, this process featured very long reaction times and limited scalability. Herein we present the synthesis of surface grown CMP thin films and nanomembranes via light induced thiol-yne click reaction. Using this reaction, we could greatly enhance the CMP nanomembrane synthesis and further broaden the variability of the LbL approach.

  13. Visible-light-induced instability in amorphous metal-oxide based TFTs for transparent electronics

    Directory of Open Access Journals (Sweden)

    Tae-Jun Ha

    2014-10-01

    Full Text Available We investigate the origin of visible-light-induced instability in amorphous metal-oxide based thin film transistors (oxide-TFTs for transparent electronics by exploring the shift in threshold voltage (Vth. A large hysteresis window in amorphous indium-gallium-zinc-oxide (a-IGZO TFTs possessing large optical band-gap (≈3 eV was observed in a visible-light illuminated condition whereas no hysteresis window was shown in a dark measuring condition. We also report the instability caused by photo irradiation and prolonged gate bias stress in oxide-TFTs. Larger Vth shift was observed after photo-induced stress combined with a negative gate bias than the sum of that after only illumination stress and only negative gate bias stress. Such results can be explained by trapped charges at the interface of semiconductor/dielectric and/or in the gate dielectric which play a role in a screen effect on the electric field applied by gate voltage, for which we propose that the localized-states-assisted transitions by visible-light absorption can be responsible.

  14. Evaluation of dental enamel caries assessment using Quantitative Light Induced Fluorescence and Optical Coherence Tomography.

    Science.gov (United States)

    Maia, Ana Marly Araújo; de Freitas, Anderson Zanardi; de L Campello, Sergio; Gomes, Anderson Stevens Leônidas; Karlsson, Lena

    2016-06-01

    An in vitro study of morphological alterations between sound dental structure and artificially induced white spot lesions in human teeth, was performed through the loss of fluorescence by Quantitative Light-Induced Fluorescence (QLF) and the alterations of the light attenuation coefficient by Optical Coherence Tomography (OCT). To analyze the OCT images using a commercially available system, a special algorithm was applied, whereas the QLF images were analyzed using the software available in the commercial system employed. When analyzing the sound region against white spot lesions region by QLF, a reduction in the fluorescence intensity was observed, whilst an increase of light attenuation by the OCT system occurred. Comparison of the percentage of alteration between optical properties of sound and artificial enamel caries regions showed that OCT processed images through the attenuation of light enhanced the tooth optical alterations more than fluorescence detected by QLF System. QLF versus OCT imaging of enamel caries: a photonics assessment. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Multiwalled Carbon Nanotube-TiO2 Nanocomposite for Visible-Light-Induced Photocatalytic Hydrogen Evolution

    Directory of Open Access Journals (Sweden)

    Ke Dai

    2014-01-01

    Full Text Available Multiwalled carbon nanotube- (MWCNT- TiO2 nanocomposite was synthesized via hydrothermal process and characterized by X-ray diffraction, UV-vis diffuse reflectance spectroscopy, field emission scanning electron microscope, thermogravimetry analysis, and N2 adsorption-desorption isotherms. Appropriate pretreatment on MWCNTs could generate oxygen-containing groups, which is beneficial for forming intimate contact between MWCNTs and TiO2 and leads to a higher thermal stability of MWCNT-TiO2 nanocomposite. Modification with MWCNTs can extend the visible-light absorption of TiO2. 5 wt% MWCNT-TiO2 derived from hydrothermal treatment at 140°C exhibiting the highest hydrogen generation rate of 15.1 μmol·h−1 under visible-light irradiation and a wide photoresponse range from 350 to 475 nm with moderate quantum efficiency (4.4% at 420 nm and 3.7% at 475 nm. The above experimental results indicate that the MWCNT-TiO2 nanocomposite is a promising photocatalyst with good stability and visible-light-induced photoactivity.

  16. Light-induced depigmentation in planarians models the pathophysiology of acute porphyrias

    Science.gov (United States)

    Stubenhaus, Bradford M; Dustin, John P; Neverett, Emily R; Beaudry, Megan S; Nadeau, Leanna E; Burk-McCoy, Ethan; He, Xinwen; Pearson, Bret J; Pellettieri, Jason

    2016-01-01

    Porphyrias are disorders of heme metabolism frequently characterized by extreme photosensitivity. This symptom results from accumulation of porphyrins, tetrapyrrole intermediates in heme biosynthesis that generate reactive oxygen species when exposed to light, in the skin of affected individuals. Here we report that in addition to producing an ommochrome body pigment, the planarian flatworm Schmidtea mediterranea generates porphyrins in its subepithelial pigment cells under physiological conditions, and that this leads to pigment cell loss when animals are exposed to intense visible light. Remarkably, porphyrin biosynthesis and light-induced depigmentation are enhanced by starvation, recapitulating a common feature of some porphyrias – decreased nutrient intake precipitates an acute manifestation of the disease. Our results establish planarians as an experimentally tractable animal model for research into the pathophysiology of acute porphyrias, and potentially for the identification of novel pharmacological interventions capable of alleviating porphyrin-mediated photosensitivity or decoupling dieting and fasting from disease pathogenesis. DOI: http://dx.doi.org/10.7554/eLife.14175.001 PMID:27240733

  17. Light-induced protein nitration and degradation with HONO emission

    Directory of Open Access Journals (Sweden)

    H. Meusel

    2017-10-01

    Full Text Available Proteins can be nitrated by air pollutants (NO2, enhancing their allergenic potential. This work provides insight into protein nitration and subsequent decomposition in the presence of solar radiation. We also investigated light-induced formation of nitrous acid (HONO from protein surfaces that were nitrated either online with instantaneous gas-phase exposure to NO2 or offline by an efficient nitration agent (tetranitromethane, TNM. Bovine serum albumin (BSA and ovalbumin (OVA were used as model substances for proteins. Nitration degrees of about 1 % were derived applying NO2 concentrations of 100 ppb under VIS∕UV illuminated conditions, while simultaneous decomposition of (nitrated proteins was also found during long-term (20 h irradiation exposure. Measurements of gas exchange on TNM-nitrated proteins revealed that HONO can be formed and released even without contribution of instantaneous heterogeneous NO2 conversion. NO2 exposure was found to increase HONO emissions substantially. In particular, a strong dependence of HONO emissions on light intensity, relative humidity, NO2 concentrations and the applied coating thickness was found. The 20 h long-term studies revealed sustained HONO formation, even when concentrations of the intact (nitrated proteins were too low to be detected after the gas exchange measurements. A reaction mechanism for the NO2 conversion based on the Langmuir–Hinshelwood kinetics is proposed.

  18. Visible light-induced OH radicals in Ga2O3: an EPR study.

    Science.gov (United States)

    Tzitrinovich, Zeev; Lipovsky, Anat; Gedanken, Aharon; Lubart, Rachel

    2013-08-21

    Reactive oxygen species (ROS) were found to exist in water suspensions of several metal oxide nanoparticles (NPs), such as CuO, TiO2 and ZnO. Visible light irradiation enhanced the capability of TiO2 and ZnO NPs to generate ROS, thus increasing their antibacterial effects. Because of the possible toxic effects on the host tissue it is desired to find nano-metal oxides which do not produce ROS under room light, but only upon a strong external stimulus. Using the technique of electron-spin resonance (ESR) coupled with spin trapping, we examined the ability of Ga2O3 submicron-particle suspensions in water to produce reactive oxygen species with and without visible light irradiation. We found that in contrast to ZnO and TiO2 NPs, no ROS are produced by Ga2O3 under room light. Nevertheless blue light induced hydroxyl radical formation in Ga2O3. This finding might suggest that NPs of Ga2O3 could be used safely for infected skin sterilization.

  19. Templated growth of graphenic materials.

    Science.gov (United States)

    Nicholas, Nolan W; Connors, L Matthew; Ding, Feng; Yakobson, Boris I; Schmidt, Howard K; Hauge, Robert H

    2009-06-17

    A novel strategy is proposed for the topologically controlled synthesis of extended graphenic sheets by additively reacting carbon into a pre-existing graphene sheet which is on top of a templating substrate. This concept is implemented and demonstrated using chemical vapor deposition (CVD). Novel morphological features observed in this study suggest unusual aspects of the CVD growth process. CVD results demonstrate the basic soundness of the synthesis strategy but highlight the sensitivity of the process to certain types of disruption and the need for alternative forms of embodiment.

  20. A template for design personas

    DEFF Research Database (Denmark)

    Nielsen, Lene; Storgaard Nielsen, Kira; Stage, Jan

    2015-01-01

    The persona method is gaining widespread use and support. Many researchers have reported from single cases and from novel domains on how they have used the method. However, the way companies and design groups describe personas has not been the focus of attention. This paper analyses 47 descriptions...... from 13 companies and compares these to an analysis of recommendations from 11 templates from literature. Furthermore, 28 interviews with Danish practitioners with experience in using personas are analyzed for content on persona descriptions. The study finds that a Danish persona style has developed...

  1. Making Deformable Template Models Operational

    DEFF Research Database (Denmark)

    Fisker, Rune

    2000-01-01

    for estimation of the model parameters, which applies a combination of a maximum likelihood and minimum distance criterion. Another contribution is a very fast search based initialization algorithm using a filter interpretation of the likelihood model. These two methods can be applied to most deformable template...... models making a non-expert user able to use the model. A comparative study of a number of optimization algorithms is also reported. In addition a general polygon-based model, an ellipse model and a textile model are proposed and a number of applications have been solved. Finally the Grenander model...

  2. Electrostatic accelerators

    OpenAIRE

    Hinterberger, F.

    2006-01-01

    The principle of electrostatic accelerators is presented. We consider Cockcroft– Walton, Van de Graaff and Tandem Van de Graaff accelerators. We resume high voltage generators such as cascade generators, Van de Graaff band generators, Pelletron generators, Laddertron generators and Dynamitron generators. The speci c features of accelerating tubes, ion optics and methods of voltage stabilization are described. We discuss the characteristic beam properties and the variety of possible beams. We ...

  3. Faster rates with less catalyst in template-directed reactions

    Science.gov (United States)

    Kanavarioti, A.; Baird, E. E.

    1995-01-01

    We have recently shown that the polycytidylic acid-directed polymerization of guanosine 5'-monophosphate 2-methylimidazolide (2-MeImpG) is amenable to kinetic study and that rate determinations as a function of 2-MeImpG concentration can reveal much mechanistic detail (Kanavarioti et al. 1993). Here we report kinetic data which show that, once the reaction has been initiated by the formation of dimers, the elongation of dimers to form longer oligomers is accelerated by decreasing polycytidylate (poly(C)) concentration from 0.05 to 0.002 M. This result is consistent with the previously proposed mechanism. The increase in the observed pseudo-first order rate constant for formation of the trimer, k3', and the corresponding constant for formation of oligomers longer than the trimer, ki' (ki' is independent of oligomer length for i > or = 4), with decreasing template concentration for a given monomer concentration is attributed to an increase in template occupancy as template concentration is reduced.

  4. Hard template synthesis of metal nanowires

    Directory of Open Access Journals (Sweden)

    Go eKawamura

    2014-11-01

    Full Text Available Metal nanowires (NWs have attracted much attention because of their high electron conductivity, optical transmittance and tunable magnetic properties. Metal NWs have been synthesized using soft templates such as surface stabilizing molecules and polymers, and hard templates such as anodic aluminum oxide, mesoporous oxide, carbon nanotubes. NWs prepared from hard templates are composites of metals and the oxide/carbon matrix. Thus, selecting appropriate elements can simplify the production of composite devices. The resulting NWs are immobilized and spatially arranged, as dictated by the ordered porous structure of the template. This avoids the NWs from aggregating, which is common for NWs prepared with soft templates in solution. Herein, the hard template synthesis of metal NWs is reviewed, and the resulting structures, properties and potential applications are discussed.

  5. Electrostatic accelerators

    CERN Document Server

    Hinterberger, F

    2006-01-01

    The principle of electrostatic accelerators is presented. We consider Cockcroft– Walton, Van de Graaff and Tandem Van de Graaff accelerators. We resume high voltage generators such as cascade generators, Van de Graaff band generators, Pelletron generators, Laddertron generators and Dynamitron generators. The speci c features of accelerating tubes, ion optics and methods of voltage stabilization are described. We discuss the characteristic beam properties and the variety of possible beams. We sketch possible applications and the progress in the development of electrostatic accelerators.

  6. One-Dimensional Organic-Inorganic Nanocomposite Synthesized with Single-Walled Carbon Nanotube Templates

    Directory of Open Access Journals (Sweden)

    Wei Li

    2014-08-01

    Full Text Available This study reports on single-walled carbon nanotubes (SWCNT as templates for the preparation of 1D porous organic-inorganic hybrid composites. The in situ deposited SWCNT were sputter coated with Sn metal and thermally oxidized in air to form a SnO2/SWCNT nanowire framework on SiO2/Si substrate. Poly(acrylic acid (PAA was coated onto this scaffold through UV light-induced radical polymerization, which resulted in the final formation of hybrid composites. The structures of hybrid composites were investigated by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, and Raman spectroscopy. The results show that PAA was successfully coated and the structural advantage of nanowire was fairly maintained, which indicates that this framework is very stable for organic functionalization in solution. The simplicity of this method for the formation of porous organic-inorganic hybrid composites provides a potential application for nanoelectronic devices.

  7. Visible light-induced crosslinking and physiological stabilization of diselenide-rich nanoparticles for redox-responsive drug release and combination chemotherapy.

    Science.gov (United States)

    Zhai, Shaodong; Hu, Xianglong; Hu, Yongjun; Wu, Baoyan; Xing, Da

    2017-03-01

    Undesired physiological instability of nanocarriers and premature drug leakage during blood circulation result in compromised therapeutic efficacy and severe side effects, which have significantly impeded the development of nanomedicine. Facile crosslinking of drug-loaded nanocarriers while keeping the potency of site-specific degradation and drug release has emerged as a viable strategy to overcome these drawbacks. Additionally, combination therapy has already shown advantages in inhibiting advanced tumors and life extension than single drug therapy. Herein, three kinds of diselenide-rich polymers were fabricated with distinct hydrophobic side chains. The component effect was interrogated to screen out PEG-b-PBSe diblock copolymer due to its favorable self-assembly controllability and high drug loading of camptothecin (CPT) and doxorubicin (DOX) that had synergistic antitumor property. Facile visible light-induced diselenide metathesis and regeneration was employed to crosslink nanocarriers for the first time. The dual drug-loaded crosslinked micelles (CPT/DOX-CCM) were stable in physiological conditions with minimal drug leakage, possessing extended blood circulation, whereas hand-in-hand dual drug release was significantly accelerated in tumor's redox microenvironments. In vitro cytotoxicity evaluation and in vivo tumor suppression with low dosage drugs further demonstrated the favorable potency of the redox-responsive nanoplatform in tumor combination chemotherapy. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Template-Directed Olefin Cross Metathesis

    OpenAIRE

    Cantrill, Stuart J.; Grubbs, Robert H; Lanari, Daniela; Leung, Ken C.-F.; Nelson, Alshakim; Poulin-Kerstien, Katherine G.; Smidt, Sebastian P.; Stoddart, J. Fraser; Tirrell, David A.

    2005-01-01

    A template containing two secondary dialkylammonium ion recognition sites for encirclement by olefin-bearing dibenzo[24]crown-8 derivatives has been used to promote olefin cross metatheses with ruthenium-alkylidene catalysts. For monoolefin monomers, the rates of metatheses and yields of the dimers are both amplified in the presence of the template. Likewise, for a diolefin monomer, the yield of the dimer is enhanced in the presence of the template under conditions where higher oligomers are ...

  9. Vertical Carbon Nanotube Device in Nanoporous Templates

    Science.gov (United States)

    Maschmann, Matthew Ralph (Inventor); Fisher, Timothy Scott (Inventor); Sands, Timothy (Inventor); Bashir, Rashid (Inventor)

    2014-01-01

    A modified porous anodic alumina template (PAA) containing a thin CNT catalyst layer directly embedded into the pore walls. CNT synthesis using the template selectively catalyzes SWNTs and DWNTs from the embedded catalyst layer to the top PAA surface, creating a vertical CNT channel within the pores. Subsequent processing allows for easy contact metallization and adaptable functionalization of the CNTs and template for a myriad of applications.

  10. Templated Dry Printing of Conductive Metal Nanoparticles

    Science.gov (United States)

    Rolfe, David Alexander

    Printed electronics can lower the cost and increase the ubiquity of electrical components such as batteries, sensors, and telemetry systems. Unfortunately, the advance of printed electronics has been held back by the limited minimum resolution, aspect ratio, and feature fidelity of present printing techniques such as gravure, screen printing and inkjet printing. Templated dry printing offers a solution to these problems by patterning nanoparticle inks into templates before drying. This dissertation shows advancements in two varieties of templated dry nanoprinting. The first, advective micromolding in vapor-permeable templates (AMPT) is a microfluidic approach that uses evaporation-driven mold filling to create submicron features with a 1:1 aspect ratio. We will discuss submicron surface acoustic wave (SAW) resonators made through this process, and the refinement process in the template manufacturing process necessary to make these devices. We also present modeling techniques that can be applied to future AMPT templates. We conclude with a modified templated dry printing that improves throughput and isolated feature patterning by transferring dry-templated features with laser ablation. This method utilizes surface energy-defined templates to pattern features via doctor blade coating. Patterned and dried features can be transferred to a polymer substrate with an Nd:YAG MOPA fiber laser, and printed features can be smaller than the laser beam width.

  11. Influence of template fill in graphoepitaxy DSA

    Science.gov (United States)

    Doise, Jan; Bekaert, Joost; Chan, Boon Teik; Hong, SungEun; Lin, Guanyang; Gronheid, Roel

    2016-03-01

    Directed self-assembly (DSA) of block copolymers (BCP) is considered a promising patterning approach for the 7 nm node and beyond. Specifically, a grapho-epitaxy process using a cylindrical phase BCP may offer an efficient solution for patterning randomly distributed contact holes with sub-resolution pitches, such as found in via and cut mask levels. In any grapho-epitaxy process, the pattern density impacts the template fill (local BCP thickness inside the template) and may cause defects due to respectively over- or underfilling of the template. In order to tackle this issue thoroughly, the parameters that determine template fill and the influence of template fill on the resulting pattern should be investigated. In this work, using three process flow variations (with different template surface energy), template fill is experimentally characterized as a function of pattern density and film thickness. The impact of these parameters on template fill is highly dependent on the process flow, and thus pre-pattern surface energy. Template fill has a considerable effect on the pattern transfer of the DSA contact holes into the underlying layer. Higher fill levels give rise to smaller contact holes and worse critical dimension uniformity. These results are important towards DSA-aware design and show that fill is a crucial parameter in grapho-epitaxy DSA.

  12. Accelerating Value Creation with Accelerators

    DEFF Research Database (Denmark)

    Jonsson, Eythor Ivar

    2015-01-01

    accelerator programs. Microsoft runs accelerators in seven different countries. Accelerators have grown out of the infancy stage and are now an accepted approach to develop new ventures based on cutting-edge technology like the internet of things, mobile technology, big data and virtual reality. It is also...... an approach to facilitate implementation and realization of business ideas and is a lucrative approach to transform research into ventures and to revitalize regions and industries in transition. Investors have noticed that the accelerator approach is a way to increase the possibility of success by funnelling...... with the traditional audit and legal universes and industries are examples of emerging potentials both from a research and business point of view to exploit and explore further. The accelerator approach may therefore be an Idea Watch to consider, no matter which industry you are in, because in essence accelerators...

  13. Light induced oxidative water splitting in photosynthesis: energetics, kinetics and mechanism.

    Science.gov (United States)

    Renger, Gernot

    2011-01-01

    The essential steps of photosynthetic water splitting take place in Photosystem II (PSII) and comprise three different reaction sequences: (i) light induced formation of the radical pair P680(+)Q(A)(-), (ii) P680(+) driven oxidative water splitting into O(2) and four protons, and (iii) two step plastoquinone reduction to plastoquinol by Q(A)(-). This mini-review briefly summarizes our state of knowledge on energetics, kinetics and mechanism of oxidative water splitting. Essential features of the two types of reactions involved are described: (a) P680(+) reduction by the redox active tyrosine Y(z) and (b) sequence of oxidation steps induced by Y(z)(ox) in the water-oxidizing complex (WOC). The rate of the former reaction is limited by the non-adiabatic electron transfer (NET) step and the multi-phase kinetics shown to originate from a sequence of relaxation processes. In marked contrast, the rate of the stepwise oxidation by Y(z)(ox) of the WOC up to the redox level S(3) is not limited by NET but by trigger reactions which probably comprise proton shifts and/or conformational changes. The overall rate of the final reaction sequence leading to formation and release of O(2) is assumed to be limited by the electron transfer step from the S(3) state of WOC to Y(z)(ox) due to involvement of an endergonic redox equilibrium. Currently discussed controversial ideas on possible pathways are briefly outlined. Several crucial points of the mechanism of oxidative water splitting, like O-O bond formation, role of local proton shift(s), details of hydrogen bonding, are still not clarified and remain a challenging topic of future research. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. Assessing caries removal by undergraduate dental students using quantitative light-induced fluorescence.

    Science.gov (United States)

    Adeyemi, Adejumoke A; Jarad, Fadi D; Komarov, Gleb N; Pender, Neil; Higham, Susan M

    2008-11-01

    The purpose of this study was to compare detection of enamel and dentinal caries by dental students' and faculty members' visual inspection and by quantitative light-induced fluorescence (QLF). The overall aim was to determine whether QLF is an appropriate technique for use in clinical skills laboratories as a teaching aid for dental undergraduates to detect and assess the removal of enamel and dentinal caries. Sixty students who had no clinical experience with dental caries were asked to select . suitably decayed teeth and mount them in plaster. After recording baseline QLF images, students removed caries according to instructions given by the clinical tutor. On completion of the exercise, the teeth were visually determined to be caries-free by the student, then confirmed by the clinical tutor. A fluorescein in alcohol solution was injected into the cavity for two minutes, rinsed, and dried before QLF images were captured. The images were visually analyzed by two examiners for the presence or absence of caries. From seventy-four images recorded, seventeen were excluded due to exposure of the pulp chamber. The remaining fifty-seven teeth, which by clinical visual examination were judged to be caries-free, were examined using QLF. Fifty-three percent were found to be caries-free, while 47 percent were carious. In this sample of fifty-seven teeth judged to be caries-free by both dental students and faculty members, QLF thus detected caries in almost half of these teeth. These findings suggest that QLF is a useful, noninvasive, nondestructive technique for the detection of caries and can serve as an adjunct to chair-side diagnosis and management of dental caries, which is typically accomplished by visual inspection. QLF may be useful and appropriate as an objective clinical teaching aid for the assessment of dental caries.

  15. Light-Induced Retinopathy: Young Age Protects more than Ocular Pigmentation.

    Science.gov (United States)

    Polosa, Anna; Bessaklia, Hyba; Lachapelle, Pierre

    2017-06-01

    The purpose of this study was to compare the efficacy that ocular melanin confers in protecting the retina of juvenile and adult rats exposed to a bright luminous environment. Juvenile (JLE) and adult (ALE) Long-Evans pigmented rats were thus exposed to a bright cyclic light (10,000lux; white light) from postnatal day 14-28 or for 6 consecutive days, respectively. Flash electroretinograms (ERG) and retinal histology were performed at different predetermined ages, post-light exposure. Despite a significant reduction in ERG responses immediately following light exposure, with time, retinal function fully recovered in JLE compared to a 54% recovery for the ALE. In ALE, we noted a region of the supero-temporal quadrant that was highly vulnerable to light damage. This region was also devoid of melanin granules prior to the light exposure. This melanin-free zone increased in size in the days that followed the end of exposure, a process that was accompanied by the gradual degeneration of the thus uncovered photoreceptors. In contrast, melanin and photoreceptor losses were minimal in JLE. Our results suggest that the light-induced photoreceptor degeneration in ALE would be secondary to the initial destruction of the RPE and ensuing loss of melanin protection. In contrast, the melanin granules of JLE appear to be significantly more resistant to light damage, a characteristic that would explain the higher resistance of JLE photoreceptors to light damage. Our results would thus suggest that the efficacy of ocular melanin protection against light damage declines with age.

  16. Dietary tomato paste protects against ultraviolet light-induced erythema in humans.

    Science.gov (United States)

    Stahl, W; Heinrich, U; Wiseman, S; Eichler, O; Sies, H; Tronnier, H

    2001-05-01

    Carotenoids are efficient antioxidants capable of scavenging reactive oxygen species generated under conditions of photooxidative stress. It has been shown that supplementation with high doses of beta-carotene protects skin against UV-induced erythema. This study was designed to investigate whether intervention with a natural dietary source rich in lycopene protects against UV-induced erythema in humans. Tomato paste (40 g), providing approximately 16 mg/d of lycopene, was ingested with 10 g of olive oil over a period of 10 wk by 9 volunteers. Controls (n = 10) received olive oil only. Erythema was induced by illumination of dorsal skin (scapular region) with a solar simulator at the beginning of the study, after 4 wk and after 10 wk. Intensity of erythema was measured by chromatometry; the a-value was determined directly before and 24 h after irradiation. Serum carotenoid levels were measured by HPLC. At the beginning of the study, carotenoid levels did not differ between the two groups. Serum levels of lycopene increased in supplemented subjects; the other carotenoids did not change significantly, and no change in serum carotenoids was observed in the control group. At wk 10, dorsal erythema formation was 40% lower in the group that consumed tomato paste compared with controls (P = 0.02; Wilcoxon-Mann-Whitney test). No significant difference between groups was found at wk 4 of treatment. The data demonstrate that it is feasible to achieve protection against UV light-induced erythema by ingestion of a commonly consumed dietary source of lycopene.

  17. Light-induced retinal degeneration causes a transient downregulation of melanopsin in the rat retina.

    Science.gov (United States)

    García-Ayuso, Diego; Galindo-Romero, Caridad; Di Pierdomenico, Johnny; Vidal-Sanz, Manuel; Agudo-Barriuso, Marta; Villegas Pérez, María P

    2017-08-01

    In this work we study the effects of an acute light-induced retinal degeneration on the population of melanopsin positive retinal ganglion cells (m+RGCs) and the expression of the melanopsin protein in the retina. The m+RGCs may be more resistant than other RGCs to lesion, but the effects of an acute light exposure in this population are unknown. Albino rats were exposed to white light (3000 lux) continuously for 48 h and processed 0, 3, 7 or 30 days after light exposure (ALE). Whole-mounted retinas were immunodetected with antibodies against melanopsin, Brn3a, and rhodopsin to study the populations of m+RGC, Brn3a+RGC and rods (which are the most abundant photoreceptors in the rat retina). Three days ALE there was substantial rod loss in an arciform area of the superior retina and with time this loss expanded in the form of rings all throughout the retina. Light exposure did not affect the number of Brn3a+RGCs but diminished the numbers of m+RGCs. Immediately ALE there was a significant decrease in the mean number of immunodetected m+RGCs that was more marked in the superior retina. Later, the number of m+RGCs increased progressively and reached normal values one month ALE. Western blot analysis showed that melanopsin expression down-regulates shortly ALE and recovers thereafter, in accordance with the anatomical data. This study demonstrates that there is a transient downregulation of melanopsin expression in the RGCs during the first month ALE. Further studies would be needed to clarify the long-term effect of light exposure on the m+RGC population. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  18. LIBO accelerates

    CERN Multimedia

    2002-01-01

    The prototype module of LIBO, a linear accelerator project designed for cancer therapy, has passed its first proton-beam acceleration test. In parallel a new version - LIBO-30 - is being developed, which promises to open up even more interesting avenues.

  19. Accelerating Inspire

    CERN Document Server

    AUTHOR|(CDS)2266999

    2017-01-01

    CERN has been involved in the dissemination of scientific results since its early days and has continuously updated the distribution channels. Currently, Inspire hosts catalogues of articles, authors, institutions, conferences, jobs, experiments, journals and more. Successful orientation among this amount of data requires comprehensive linking between the content. Inspire has lacked a system for linking experiments and articles together based on which accelerator they were conducted at. The purpose of this project has been to create such a system. Records for 156 accelerators were created and all 2913 experiments on Inspire were given corresponding MARC tags. Records of 18404 accelerator physics related bibliographic entries were also tagged with corresponding accelerator tags. Finally, as a part of the endeavour to broaden CERN's presence on Wikipedia, existing Wikipedia articles of accelerators were updated with short descriptions and links to Inspire. In total, 86 Wikipedia articles were updated. This repo...

  20. Induction accelerators

    CERN Document Server

    Takayama, Ken

    2011-01-01

    A broad class of accelerators rests on the induction principle whereby the accelerating electrical fields are generated by time-varying magnetic fluxes. Particularly suitable for the transport of bright and high-intensity beams of electrons, protons or heavy ions in any geometry (linear or circular) the research and development of induction accelerators is a thriving subfield of accelerator physics. This text is the first comprehensive account of both the fundamentals and the state of the art about the modern conceptual design and implementation of such devices. Accordingly, the first part of the book is devoted to the essential features of and key technologies used for induction accelerators at a level suitable for postgraduate students and newcomers to the field. Subsequent chapters deal with more specialized and advanced topics.

  1. Comparison between the standard SPM2 template and Korean-standard template in FDG-PET

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jung Hee; Lee, Byeong Il; Song, Ho Chun; Min, Jung Joon; Bom, Hee Seung [Chonnam National University Hospital, Gwangju (Korea, Republic of); Lee, Jae Sung [Seoul National University Hospital, Seoul (Korea, Republic of)

    2005-07-01

    The preprocessing step of statistical parametric mapping (SPM) requires the procedure of spatial normalization that consists of applying the nonlinear deformations needed to force every particular PET scan to match a reference template. The purpose of this study is to asses the statistic influence of using 2 different templates (the standard SPM2-PET template and Korean-standard PET template) in the normalization. We compared the regional metabolic patterns on 18F-FDG (fluorodeoxyglucose) images obtained from 4 patients with Alzheimers disease (AD) and 16 normal subjects. The statistical outcome of between- group comparison was analyzed with SPM2 and was applied into two levels of thresholds (an uncorrected P value of P <0.001, a corrected P value of P < 0.05). As a result, the most significant hypometabolic region was commonly found in the left temporal gyrus regardless of template type or thresholds. However, inconsistent results including different extent and the t-score statistics representing metabolic changes could be also observed between two templates. While the standard SPM2 template showed hypometabolic regions corresponding to Brodman area (BA) 7 and 9, Korean-standard template was not observed these regions. In addition, hypometabolic regions corresponding to BA 38 and 46 indicated not the standard SPM2 template but Korean-standard template. Statistic result showed that the standard SPM2 template effectively reflects the dorsal region of the brain while Korean-standard template is more sensitive to the medial region of the brain.

  2. Comparative analyses of light-induced anthocyanin accumulation and gene expression between the ray florets and leaves in chrysanthemum.

    Science.gov (United States)

    Hong, Yan; Yang, Li-Wen; Li, Meng-Ling; Dai, Si-Lan

    2016-06-01

    Light is one of the key environmental factors that affect anthocyanin biosynthesis. However, the underlying molecular mechanism remains unclear, and many problems regarding phenotypic change and corresponding gene regulation have not been solved. In the present study, comparative analyses of light-induced anthocyanin accumulation and gene expression between the ray florets and leaves were performed in Chrysanthemum × morifolium 'Purple Reagan'. After contrasting the variations in the flower color phenotype and relative pigment content, as well as expression patterns of structural and regulator genes responsible for anthocyanin biosynthesis and photoreceptor between different plant organs under light and dark conditions, we concluded that (1) both the capitulum and foliage are key organs responding to light for chrysanthemum coloration; (2) compared with flavones, shading makes a greater decrease on the anthocyanins accumulation; (3) most of the structural and regulatory genes in the light-induced anthocyanin pathway specifically express in the ray florets; and (4) CmCHS, CmF3H, CmF3'H, CmANS, CmDFR, Cm3GT, CmMYB5-1, CmMYB6, CmMYB7-1, CmbHLH24, CmCOP1 and CmHY5 are key genes for light-induced anthocyanin biosynthesis in chrysanthemum ray florets, while on the transcriptional level, the expressions of CmPHYA, CmPHYB, CmCRY1a, CmCRY1b and CmCRY2 are insignificantly changed. Moreover, the inferred comprehensive effect of multiple signals on the accumulation of anthocyanins and transmission channel of light signal that exist between the leaves and ray florets were further discussed. These results further our understanding of the relationship between the gene expression and light-induced anthocyanin biosynthesis, and lay foundations for the promotion of the molecular breeding of novel flower colors in chrysanthemums. Copyright © 2016. Published by Elsevier Masson SAS.

  3. Effects of day-time exposure to different light intensities on light-induced melatonin suppression at night

    OpenAIRE

    Kozaki, Tomoaki; Kubokawa, Ayaka; Taketomi, Ryunosuke; Hatae, Keisuke

    2015-01-01

    Background Bright nocturnal light has been known to suppress melatonin secretion. However, bright light exposure during the day-time might reduce light-induced melatonin suppression (LIMS) at night. The effective proportion of day-time light to night-time light is unclear; however, only a few studies on accurately controlling both day- and night-time conditions have been conducted. This study aims to evaluate the effect of different day-time light intensities on LIMS. Methods Twelve male subj...

  4. Practical Biometric Authentication with Template Protection

    NARCIS (Netherlands)

    Tuyls, P.; Akkermans, A.H.M.; Kevenaar, T.A.M.; Schrijen, G.J.; Bazen, A.M.; Veldhuis, Raymond N.J.; Kanade, T.; Jain, A.K.; Ratha, N.K.

    We show the feasibility of template protecting biometric authentication systems. In particular, we apply template protection schemes to fingerprint data. Therefore we first make a fixed length representation of the fingerprint data by applying Gabor filtering. Next we introduce the reliable

  5. Screening for templates that promote crystallization

    NARCIS (Netherlands)

    Urbanus, J.; Roelands, C.P.M.; Horst, J.H. ter; Verdoes, D.; Jansens, P.J.

    2008-01-01

    In Situ Product Recovery (ISPR) applied in fermentation processes leads to improved yield and productivity of these processes. In principle, ISPR can be achieved using Template Induced Crystallization (TIC), which is one possible ISPR technique. With TIC, templates are added to the solution as a

  6. Surgical Templates for Dental Implant Positioning; Current ...

    African Journals Online (AJOL)

    applicability of surgical templates used in the placement of dental implants. KEYWORDS: Dental implants, surgical templates, surgical procedure, stent. Access this .... ended up with the identification of basic three‑fabrication design concepts; (1) ... surgical guide on mounted diagnostic models of patient's mouth. He also ...

  7. Cosmic Acceleration

    Science.gov (United States)

    Bean, Rachel

    2011-03-01

    In this series of lectures we review observational evidence for, and theoretical investigations into, cosmic acceleration and dark energy. The notes are in four sections. First I review the basic cosmological formalism to describe the expansion history of the universe and how distance measures are defined. The second section covers the evidence for cosmic acceleration from cosmic distance measurements. Section 3 discusses the theoretical avenues being considered to explain the cosmological observations. Section 4 discusses how the growth of inhomogeneities and large scale structure observations might help us pin down the theoretical origin of cosmic acceleration.

  8. Template Assembly for Detailed Urban Reconstruction

    KAUST Repository

    Nan, Liangliang

    2015-05-04

    We propose a new framework to reconstruct building details by automatically assembling 3D templates on coarse textured building models. In a preprocessing step, we generate an initial coarse model to approximate a point cloud computed using Structure from Motion and Multi View Stereo, and we model a set of 3D templates of facade details. Next, we optimize the initial coarse model to enforce consistency between geometry and appearance (texture images). Then, building details are reconstructed by assembling templates on the textured faces of the coarse model. The 3D templates are automatically chosen and located by our optimization-based template assembly algorithm that balances image matching and structural regularity. In the results, we demonstrate how our framework can enrich the details of coarse models using various data sets.

  9. Diabetic retinopathy alters light-induced clock gene expression and dopamine levels in the mouse retina.

    Science.gov (United States)

    Lahouaoui, Hasna; Coutanson, Christine; Cooper, Howard M; Bennis, Mohamed; Dkhissi-Benyahya, Ouria

    2016-01-01

    Diabetic retinopathy is one of the most common consequences of diabetes that affects millions of working-age adults worldwide and leads to progressive degeneration of the retina, visual loss, and blindness. Diabetes is associated with circadian disruption of the central and peripheral circadian clocks, but the mechanisms responsible for such alterations are unknown. Using a streptozotocin (STZ)-induced model of diabetes, we investigated whether diabetes alters 1) the circadian regulation of clock genes in the retina and in the central clocks, 2) the light response of clock genes in the retina, and/or 3) light-driven retinal dopamine (DA), a major output marker of the retinal clock. To quantify circadian expression of clock and clock-controlled genes, retinas and suprachiasmatic nucleus (SCN) from the same animals were collected every 4 h in circadian conditions, 12 weeks post-diabetes. Induction of Per1, Per2, and c-fos mRNAs was quantified in the retina after the administration of a pulse of monochromatic light (480 nm, 1.17×10(14) photons/cm(2)/s, 15 min) at circadian time 16. Gene expression was assessed with real-time reverse transcription PCR (RT-PCR). Pooled retinas from the control and STZ-diabetic mice were collected 2 h after light ON and light OFF (Zeitgeber time (ZT)2 and ZT14), and DA and its metabolite were analyzed with high-performance liquid chromatography (HPLC). We found variable effects of diabetes on the expression of clock genes in the retina and only slight differences in phase and/or amplitude in the SCN. c-fos and Per1 induction by a 480 nm light pulse was abolished in diabetic animals at 12 weeks post-induction of diabetes in comparison with the control mice, suggesting a deficit in light-induced neuronal activation of the retinal clock. Finally, we quantified a 56% reduction in the total number of tyrosine hydroxylase (TH) immunopositive cells, associated with a decrease in DA levels during the subjective day (ZT2). These findings

  10. Diabetic retinopathy alters light-induced clock gene expression and dopamine levels in the mouse retina

    Science.gov (United States)

    Lahouaoui, Hasna; Coutanson, Christine; Cooper, Howard M.; Bennis, Mohamed

    2016-01-01

    Purpose Diabetic retinopathy is one of the most common consequences of diabetes that affects millions of working-age adults worldwide and leads to progressive degeneration of the retina, visual loss, and blindness. Diabetes is associated with circadian disruption of the central and peripheral circadian clocks, but the mechanisms responsible for such alterations are unknown. Using a streptozotocin (STZ)-induced model of diabetes, we investigated whether diabetes alters 1) the circadian regulation of clock genes in the retina and in the central clocks, 2) the light response of clock genes in the retina, and/or 3) light-driven retinal dopamine (DA), a major output marker of the retinal clock. Methods To quantify circadian expression of clock and clock-controlled genes, retinas and suprachiasmatic nucleus (SCN) from the same animals were collected every 4 h in circadian conditions, 12 weeks post-diabetes. Induction of Per1, Per2, and c-fos mRNAs was quantified in the retina after the administration of a pulse of monochromatic light (480 nm, 1.17×1014 photons/cm2/s, 15 min) at circadian time 16. Gene expression was assessed with real-time reverse transcription PCR (RT–PCR). Pooled retinas from the control and STZ-diabetic mice were collected 2 h after light ON and light OFF (Zeitgeber time (ZT)2 and ZT14), and DA and its metabolite were analyzed with high-performance liquid chromatography (HPLC). Results We found variable effects of diabetes on the expression of clock genes in the retina and only slight differences in phase and/or amplitude in the SCN. c-fos and Per1 induction by a 480 nm light pulse was abolished in diabetic animals at 12 weeks post-induction of diabetes in comparison with the control mice, suggesting a deficit in light-induced neuronal activation of the retinal clock. Finally, we quantified a 56% reduction in the total number of tyrosine hydroxylase (TH) immunopositive cells, associated with a decrease in DA levels during the subjective day (ZT2

  11. Preparation and controlled drug delivery applications of mesoporous silica polymer nanocomposites through the visible light induced surface-initiated ATRP

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Long; Liu, Meiying; Mao, Liucheng; Xu, Dazhuang; Wan, Qing; Zeng, Guangjian; Shi, Yingge [Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Wen, Yuanqing, E-mail: m18600788382@163.com [Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Zhang, Xiaoyong, E-mail: xiaoyongzhang1980@gmail.com [Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Wei, Yen, E-mail: weiyen@tsinghua.edu.cn [Department of Chemistry and The Tsinghua Center for Frontier Polymer Research, Tsinghua University, Beijing, 100084 (China)

    2017-08-01

    Graphical abstract: A novel strategy for surface PEGylation of mesoporous silica nanoparticles was developed based on the light induced surface-initiated atom transfer radical polymerization. - Highlights: • Surface modification of silica nanoparticles through light induced surface-initiated ATRP. • MSNs-NH{sub 2}-poly(IA-co-PEGMA) nanocomposites show high water dispersity. • MSNs-NH{sub 2}-poly(IA-co-PEGMA) nanocomposites are promising for biomedical applications. • The light induced ATRP possesses many advantages as compared with traditional ATRP. - Abstract: The mesoporous materials with large pore size, high specific surface area and high thermal stability have been widely utilized in a variety of fields ranging from environmental remediation to separation and biomedicine. However, surface modification of these silica nanomaterials is required to endow novel properties and achieve better performance for most of these applications. In this work, a new method has been established for surface modification of mesoporous silica nanoparticles (MSNs) that relied on the visible light induced atom transfer radical polymerization (ATRP). In the procedure, the copolymers composited with itaconic acid (IA) and poly(ethylene glycol)methyl acrylate (PEGMA) were grafted from MSNs using IA and PEGMA as the monomers and 10-Phenylphenothiazine(PTH) as the organic catalyst. The successful preparation of final polymer nanocomposites (named as MSNs-NH{sub 2}-poly(IA-co-PEGMA)) were evidenced by a series of characterization techniques. More importantly, the anticancer agent cisplatin can be effectively loaded on MSNs-NH{sub 2}-poly(IA-co-PEGMA) and controlled release it from the drug-loading composites with pH responsive behavior. As compared with conventional ATRP, the light induced surface-initiated ATRP could also be utilized for preparation of various silica polymer nanocomposites under rather benign conditions (e.g. absent of transition metal ions, low polymerization

  12. Horizontal Accelerator

    Data.gov (United States)

    Federal Laboratory Consortium — The Horizontal Accelerator (HA) Facility is a versatile research tool available for use on projects requiring simulation of the crash environment. The HA Facility is...

  13. Accelerated construction

    Science.gov (United States)

    2004-01-01

    Accelerated Construction Technology Transfer (ACTT) is a strategic process that uses various innovative techniques, strategies, and technologies to minimize actual construction time, while enhancing quality and safety on today's large, complex multip...

  14. LINEAR ACCELERATOR

    Science.gov (United States)

    Christofilos, N.C.; Polk, I.J.

    1959-02-17

    Improvements in linear particle accelerators are described. A drift tube system for a linear ion accelerator reduces gap capacity between adjacent drift tube ends. This is accomplished by reducing the ratio of the diameter of the drift tube to the diameter of the resonant cavity. Concentration of magnetic field intensity at the longitudinal midpoint of the external sunface of each drift tube is reduced by increasing the external drift tube diameter at the longitudinal center region.

  15. Templated Growth of Magnetic Recording Media

    Science.gov (United States)

    Sundar, Vignesh

    Current and potential next-generation magnetic recording technologies are based on the writing and reading of bits on a magnetic thin film with a granular microstructure, with grains of the magnetic material surrounded by an amorphous segregant. In order to realize the highest achievable data storage capabilities, there is a need for better control of the magnetic media microstructure, particularly in terms of minimizing grain size and grain boundary thickness distributions. In this work, a guided magnetic media growth is attempted by creating a pre-fabricated template with a specific material and morphology. The template is designed in such a way that, when magnetic media consisting of the magnetic alloy and segregant are sputtered, the sites on the template result in a controlled two-phase growth of magnetic media. The template is fabricated using self-assembling block copolymers, which can be used to fabricate nanostructures with a regular hexagonal lattice of spheres of one block in the other's matrix. These are then used as etch-masks to fabricate the template. In this thesis, we describe the approach used to fabricate these templates and demonstrate the two-phase growth of magnetic recording media. In such an approach, the magnetic grain size is defined by the uniform pitch of the block copolymer pattern, resulting in a uniform microstructure with much better grain size distribution than can be obtained with conventional un-templated media growth. The templated growth technique is also a suitable additive technique for the fabrication of Bit Patterned Media, another potential next-generation technology wherein the magnetic bits are isolated patterned islands. Combining nanoimprint lithography with templated growth, we can generate a long range spatially ordered array of magnetic islands with no etching of the magnetic material.

  16. Templated Native Silk Smectic Gels

    Science.gov (United States)

    Jin, Hyoung-Joon (Inventor); Park, Jae-Hyung (Inventor); Valluzzi, Regina (Inventor)

    2016-01-01

    One aspect of the present invention relates to a method of preparing a fibrous protein smectic hydrogel by way of a solvent templating process, comprising the steps of pouring an aqueous fibrous protein solution into a container comprising a solvent that is not miscible with water; sealing the container and allowing it to age at about room temperature; and collecting the resulting fibrous protein smectic hydrogel and allowing it to dry. Another aspect of the present invention relates to a method of obtaining predominantly one enantiomer from a racemic mixture, comprising the steps of pouring an aqueous fibrous protein solution into a container comprising a solvent that is not miscible with water; sealing the container and allowing it to age at about room temperature; allowing the enantiomers of racemic mixture to diffuse selectively into the smectic hydrogel in solution; removing the smectic hydrogel from the solution; rinsing predominantly one enantiomer from the surface of the smectic hydrogel; and extracting predominantly one enantiomer from the interior of the smectic hydrogel. The present invention also relates to a smectic hydrogel prepared according to an aforementioned method.

  17. Nanowires and nanostructures fabrication using template methods

    DEFF Research Database (Denmark)

    Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.; Vlad, A.

    2009-01-01

    One of the great challenges of today is to find reliable techniques for the fabrication of nanomaterials and nanostructures. Methods based on template synthesis and on self organization are the most promising due to their easiness and low cost. This paper focuses on the electrochemical synthesis ...... of nanowires and nanostructures using nanoporous host materials such as supported anodic aluminum considering it as a key template for nanowires based devices. New ways are opened for applications by combining such template synthesis methods with nanolithographic techniques....

  18. Fragment-Based Drug Design Facilitated by Protein-Templated Click Chemistry : Fragment Linking and -Optimization of Inhibitors of the Aspartic Protease Endothiapepsin

    NARCIS (Netherlands)

    Mondal, Milon; Unver, M. Yagiz; Pal, Asish; Bakker, Matthijs; Berrier, Stephan R.; Hirsch, Anna K H

    2016-01-01

    There is an urgent need for the development of efficient methodologies that accelerate drug discovery. We demonstrate that the strategic combination of fragment linking/optimization and protein-templated click chemistry is an efficient and powerful method that accelerates the hit-identification

  19. Signal Integration by ABA in the Blue Light-Induced Acidification of Leaf Pavement Cells in Pea (Pisum sativum L. var. Argenteum).

    Science.gov (United States)

    den Os, Désirée; Staal, Marten; Elzenga, J Theo M

    2007-05-01

    Leaf pavement cell expansion in light depends on apoplastic acidification by a plasma membrane proton-pumping ATPase, modifying cell wall extensibility and providing the driving force for uptake of osmotically active solutes generating turgor. This paper shows that the plant hormone ABA inhibits light-induced leaf disk growth as well as the blue light-induced pavement cell growth in pea (Pisum sativum L.). In the phytochrome chromophore-deficient mutant pcd2, the effect of ABA on the blue light-induced apoplastic acidification response, which exhibits a high fluence phase via phytochrome and a low fluence phase via an unknown blue light receptor, is still present, indicating an interaction of ABA with the blue light receptor pathway. Furthermore, it is shown that ABA inhibits the blue light-induced apoplastic acidification reversibly. These results indicate that the effect of ABA on apoplastic acidification can provide a mechanism for short term, reversible adjustment of leaf growth rate to environmental change.

  20. Templated and template-free fabrication strategies for zero-dimensional hollow MOF superstructures.

    Science.gov (United States)

    Kim, Hyehyun; Lah, Myoung Soo

    2017-05-16

    Various fabrication strategies for hollow metal-organic framework (MOF) superstructures are reviewed and classified using various types of external templates and their properties. Hollow MOF superstructures have also been prepared without external templates, wherein unstable intermediates obtained during reactions convert to the final hollow MOF superstructures. Many hollow MOF superstructures have been fabricated using hard templates. After the core-shell core@MOF structure was prepared using a hard template, the core was selectively etched to generate a hollow MOF superstructure. Another approach for generating hollow superstructures is to use a solid reactant as a sacrificial template; this method requires no additional etching process. Soft templates such as discontinuous liquid/emulsion droplets and gas bubbles in a continuous soft phase have also been employed to prepare hollow MOF superstructures.

  1. Fast Legendre moment computation for template matching

    Science.gov (United States)

    Li, Bing C.

    2017-05-01

    Normalized cross correlation (NCC) based template matching is insensitive to intensity changes and it has many applications in image processing, object detection, video tracking and pattern recognition. However, normalized cross correlation implementation is computationally expensive since it involves both correlation computation and normalization implementation. In this paper, we propose Legendre moment approach for fast normalized cross correlation implementation and show that the computational cost of this proposed approach is independent of template mask sizes which is significantly faster than traditional mask size dependent approaches, especially for large mask templates. Legendre polynomials have been widely used in solving Laplace equation in electrodynamics in spherical coordinate systems, and solving Schrodinger equation in quantum mechanics. In this paper, we extend Legendre polynomials from physics to computer vision and pattern recognition fields, and demonstrate that Legendre polynomials can help to reduce the computational cost of NCC based template matching significantly.

  2. Template for safety reports with descriptive example

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

  3. Template-based prediction of protein function.

    Science.gov (United States)

    Petrey, Donald; Chen, T Scott; Deng, Lei; Garzon, Jose Ignacio; Hwang, Howook; Lasso, Gorka; Lee, Hunjoong; Silkov, Antonina; Honig, Barry

    2015-06-01

    We discuss recent approaches for structure-based protein function annotation. We focus on template-based methods where the function of a query protein is deduced from that of a template for which both the structure and function are known. We describe the different ways of identifying a template. These are typically based on sequence analysis but new methods based on purely structural similarity are also being developed that allow function annotation based on structural relationships that cannot be recognized by sequence. The growing number of available structures of known function, improved homology modeling techniques and new developments in the use of structure allow template-based methods to be applied on a proteome-wide scale and in many different biological contexts. This progress significantly expands the range of applicability of structural information in function annotation to a level that previously was only achievable by sequence comparison. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Template analysis for the MAGIC telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Menzel, Uta [Max-Planck-Institut fuer Physik, Muenchen (Germany); Collaboration: MAGIC-Collaboration

    2016-07-01

    The MAGIC telescopes are two 17-m-diameter Imaging Air Cherenkov Telescopes located on the Canary island of La Palma. They record the Cherenkov light from air showers induced by very high energy photons. The current data analysis uses a parametrization of the two shower images (including Hillas parameters) to determine the characteristics of the primary particle. I am implementing an advanced analysis method that compares shower images on a pixel basis with template images based on Monte Carlo simulations. To reduce the simulation effort the templates contain only pure shower images that are convolved with the telescope response later in the analysis. The primary particle parameters are reconstructed by maximizing the likelihood of the template. By using all the information available in the shower images, the performance of MAGIC is expected to improve. In this presentation I will explain the general idea of a template-based analysis and show the first results of the implementation.

  5. Template Approach for Adaptive Learning Strategies

    NARCIS (Netherlands)

    Abbing, Jana; Koidl, Kevin

    2006-01-01

    Please, cite this publication as: Abbing, J. & Koidl, K. (2006). Template Approach for Adaptive Learning Strategies. Proceedings of Adaptive Hypermedia. June, Dublin, Ireland. Retrieved June 30th, 2006, from http://dspace.learningnetworks.org

  6. Visible light-induced enzymatic hydrogen production from oligosaccharides using Mg chlorophyll-a and platinum colloid conjugate system

    Energy Technology Data Exchange (ETDEWEB)

    Saiki, Yoshinobu; Amao, Yutaka [Oita Univ. (Japan). Dept. of Applied Chemistry

    2004-07-01

    Visible light-induced enzymatic hydrogen production coupling the enzymatic oligosaccharide degradation and hydrogen production with platinum colloid using the photosensitization of Mg chlorophyll-a (Mg Chl-a) has been developed. The continuous hydrogen gas production was observed when the reaction mixture containing oligosaccharide (sucrose or maltose), invertase, glucose dehydrogenase, nicotinamide adenine dinucleotide (NAD{sup +}), Mg Chl-a, methylviologen (MV{sup 2+}, an electron relay reagent) and platinum colloid was irradiated by visible light. After 420 min irradiation, the amounts of hydrogen production from sucrose and from maltose were estimated to be 4.3 and 0.40 {mu}mol, respectively. (Author)

  7. Ultraviolet light photosensitivity in Ge-doped silica fibers: wavelength dependence of the light-induced index change.

    Science.gov (United States)

    Malo, B; Vineberg, K A; Bilodeau, F; Albert, J; Johnson, D C; Hill, K O

    1990-09-01

    A novel technique is reported for detecting permanent and transient light-induced refractive-index changes (photosensitivity) in optical fibers. The index change is detected by irradiating one arm of an unbalanced Mach-Zehnder fiber interferometer with UV light, thereby changing its optical path length. From a measurement of the change in the spectral response of the Mach-Zehnder interferometer, the change in the fiber core index as a function of wavelength can be determined. The equilibrium change in the core index is found to have an almost constant value of approximately 2.3 x 10(-5) over the measured wavelength range of 700 to 1400 nm.

  8. Formation of indoor nitrous acid (HONO) by light-induced NO2 heterogeneous reactions with white wall paint.

    Science.gov (United States)

    Bartolomei, Vincent; Sörgel, Matthias; Gligorovski, Sasho; Alvarez, Elena Gómez; Gandolfo, Adrien; Strekowski, Rafal; Quivet, Etienne; Held, Andreas; Zetzsch, Cornelius; Wortham, Henri

    2014-01-01

    Gaseous nitrogen dioxide (NO2) represents an oxidant that is present in relatively high concentrations in various indoor settings. Remarkably increased NO2 levels up to 1.5 ppm are associated with homes using gas stoves. The heterogeneous reactions of NO2 with adsorbed water on surfaces lead to the generation of nitrous acid (HONO). Here, we present a HONO source induced by heterogeneous reactions of NO2 with selected indoor paint surfaces in the presence of light (300 nmpaint surfaces to generate HONO within indoor environments by light-induced NO2 heterogeneous reactions.

  9. Deep UV light induced, fast reconfigurable and fixed waveguides in Mg doped LiTaO(3).

    Science.gov (United States)

    Juvalta, Flurin; Koziarska-Glinka, Bozena; Jazbinsek, Mojca; Montemezzani, Germano; Kitamura, Kenji; Günter, Peter

    2006-09-04

    Dynamic waveguides are induced beneath the surface of magnesium doped near-stoichiometric lithium tantalate by deep UV light at lambda = 257 nm using the interband photorefractive effect. The waveguides can be reconfigured in 10 ms at UV intensities of 100 mW/cm(2). We show the importance of the background illumination for the build-up of dynamic optical waveguides. We also present a new fixing process of the light-induced waveguide structures when the background light is absent. These quasi-fixed structures with dark decay times of several days are due to charges trapped in deep traps.

  10. Deep UV light induced, fast reconfigurable and fixed waveguides in Mg doped LiTaO3

    Science.gov (United States)

    Juvalta, Flurin; Koziarska-Glinka, Bozena; Jazbinsek, Mojca; Montemezzani, Germano; Kitamura, Kenji; Günter, Peter

    2006-09-01

    Dynamic waveguides are induced beneath the surface of magnesium doped near-stoichiometric lithium tantalate by deep UV light at lambda = 257 nm using the interband photorefractive effect. The waveguides can be reconfigured in 10 ms at UV intensities of 100 mW/cm2. We show the importance of the background illumination for the build-up of dynamic optical waveguides. We also present a new fixing process of the light-induced waveguide structures when the background light is absent. These quasi-fixed structures with dark decay times of several days are due to charges trapped in deep traps

  11. Writing and probing light-induced waveguides thanks to an endlessly single-mode photonic crystal fiber.

    Science.gov (United States)

    Huy, Kien Phan; Safioui, Jassem; Guichardaz, Blandine; Devaux, Fabrice; Chauvet, Mathieu

    2012-07-01

    We demonstrate writing and probing of light-induced waveguides in photorefractive bulk LiNbO3 crystal using an endlessly single-mode photonic crystal fiber. The optical waveguides are written at visible wavelengths by slightly raising the ferroelectric crystal temperature to benefit from the pyroelectric-driven photorefractive effect and the guiding properties are investigated at telecom wavelengths using the same photonic crystal fiber. End butt coupling with this photonic crystal fiber enables writing and probing of optical waveguides due to the self-alignment properties of spatial solitons.

  12. Light-induced refractive-index modifications in dielectric thin films: experimental determination of relaxation time and amplitude.

    Science.gov (United States)

    Monneret, S; Tisserand, S; Flory, F; Rigneault, H

    1996-09-01

    A two-beam setup based on the totally reflecting prism coupler is shown to be a powerful means of characterizing light-induced refractive-index modifications in dielectric thin films. Rise and relaxation times and amplitudes of thin-film refractive-index variations can be measured. Some developments of the electromagnetic theory of prism coupling are presented for Gaussian incident beams. Measurements made on a single Ta(2)O(5) layer deposited on a silica glass are presented. Relaxation times of a few milliseconds reveal the thermal origin of the phenomena. The thermal nonlinear coefficient of this Ta(2)O(5) layer is nearly 10(-15) m(2)/W.

  13. Activation of flavin-containing oxidases underlies light-induced production of H2O2 in mammalian cells

    OpenAIRE

    Hockberger, Philip E.; Skimina, Timothy A.; Centonze, Victoria E.; Lavin, Colleen; Chu, Su; Dadras, Soheil; Reddy, Janardan K.; White, John G.

    1999-01-01

    Violet-blue light is toxic to mammalian cells, and this toxicity has been linked with cellular production of H2O2. In this report, we show that violet-blue light, as well as UVA, stimulated H2O2 production in cultured mouse, monkey, and human cells. We found that H2O2 originated in peroxisomes and mitochondria, and it was enhanced in cells overexpressing flavin-containing oxidases. These results support the hypothesis that photoreduction of flavoproteins underlies light-induced production of ...

  14. In search of the visual pigment template

    OpenAIRE

    Govardovskii, V.I.; Fyhrquist, N; Reuter, T; Kuzmin, D.G.; Donner, K

    2000-01-01

    Absorbance spectra were recorded by microspectrophotometry from 39 different rod and cone types representing amphibians, reptiles, and fishes, with A1- or A2-based visual pigments and [lambda]max ranging from 357 to 620 nm. The purpose was to investigate accuracy limits of putative universal templates for visual pigment absorbance spectra, and if possible to amend the templates to overcome the limitations. It was found that (1) the absorbance spectrum of frog rhodopsin extract very precisely ...

  15. Multi-template polymerase chain reaction

    Directory of Open Access Journals (Sweden)

    Elena Kalle

    2014-12-01

    Full Text Available PCR is a formidable and potent technology that serves as an indispensable tool in a wide range of biological disciplines. However, due to the ease of use and often lack of rigorous standards many PCR applications can lead to highly variable, inaccurate, and ultimately meaningless results. Thus, rigorous method validation must precede its broad adoption to any new application. Multi-template samples possess particular features, which make their PCR analysis prone to artifacts and biases: multiple homologous templates present in copy numbers that vary within several orders of magnitude. Such conditions are a breeding ground for chimeras and heteroduplexes. Differences in template amplification efficiencies and template competition for reaction compounds undermine correct preservation of the original template ratio. In addition, the presence of inhibitors aggravates all of the above-mentioned problems. Inhibitors might also have ambivalent effects on the different templates within the same sample. Yet, no standard approaches exist for monitoring inhibitory effects in multitemplate PCR, which is crucial for establishing compatibility between samples.

  16. A Generic Stochastic Template Bank Placement Algorithm

    Science.gov (United States)

    Frei, Melissa; Fotopoulos, N.; Priviteria, S.

    2012-01-01

    Black hole binary (BBH) systems represent strong candidates for gravitational wave (GW) detection by GW detectors LIGO and Virgo. BBH searches are template based searches where the templates describe potential GWs. Most BBH sources are spinning strongly enough to affect orbital dynamics though past searches have all been for non-spinning systems. Neglecting spin results in a significant decrease in a BBH search's sensitivity to spinning systems while the inclusion of leading order, single parameter spin corrections regain much of that sensitivity. BBH templates in past searches were chosen so that the overlap between neighboring templates was 97%. The optimal placement of non-spinning, inspiral templates is known but does not work for systems described by more parameters. For spinning systems, the placement metric is not known and stochastic methods like the one described in this poster are necessary. The method described here is based on previous stochastic work. It represents a fast, flexible, open-source tool using publicly available LIGO Algorithms Library (LAL) to generate stochastic banks for any template family no matter the number of parameters used to describe it. The method shows more efficient coverage of the parameter space of interest than a discrete stacking of a two-dimensional bank in a third direction.

  17. Rev1, Rev3, or Rev7 siRNA Abolishes Ultraviolet Light-Induced Translesion Replication in HeLa Cells: A Comprehensive Study Using Alkaline Sucrose Density Gradient Sedimentation

    Science.gov (United States)

    Takezawa, Jun; Ishimi, Yukio; Aiba, Naomi; Yamada, Kouichi

    2010-01-01

    When a replicative DNA polymerase stalls upon encountering a lesion on the template strand, it is relieved by other low-processivity polymerase(s), which insert nucleotide(s) opposite the lesion, extend by a few nucleotides, and dissociate from the 3′-OH. The replicative polymerase then resumes DNA synthesis. This process, termed translesion replication (TLS) or replicative bypass, may involve at least five different polymerases in mammals, although the participating polymerases and their roles have not been entirely characterized. Using siRNAs originally designed and an alkaline sucrose density gradient sedimentation technique, we verified the involvement of several polymerases in ultraviolet (UV) light-induced TLS in HeLa cells. First, siRNAs to Rev3 or Rev7 largely abolished UV-TLS, suggesting that these 2 gene products, which comprise Polζ, play a main role in mutagenic TLS. Second, Rev1-targeted siRNA also abrogated UV-TLS, indicating that Rev1 is also indispensable to mutagenic TLS. Third, Polη-targeted siRNA also prevented TLS to a greater extent than our expectations. Forth, although siRNA to Polι had no detectable effect, that to Polκ delayed UV-TLS. To our knowledge, this is the first study reporting apparent evidence for the participation of Polκ in UV-TLS. PMID:21151666

  18. Rev1, Rev3, or Rev7 siRNA Abolishes Ultraviolet Light-Induced Translesion Replication in HeLa Cells: A Comprehensive Study Using Alkaline Sucrose Density Gradient Sedimentation

    Directory of Open Access Journals (Sweden)

    Jun Takezawa

    2010-01-01

    Full Text Available When a replicative DNA polymerase stalls upon encountering a lesion on the template strand, it is relieved by other low-processivity polymerase(s, which insert nucleotide(s opposite the lesion, extend by a few nucleotides, and dissociate from the 3′-OH. The replicative polymerase then resumes DNA synthesis. This process, termed translesion replication (TLS or replicative bypass, may involve at least five different polymerases in mammals, although the participating polymerases and their roles have not been entirely characterized. Using siRNAs originally designed and an alkaline sucrose density gradient sedimentation technique, we verified the involvement of several polymerases in ultraviolet (UV light-induced TLS in HeLa cells. First, siRNAs to Rev3 or Rev7 largely abolished UV-TLS, suggesting that these 2 gene products, which comprise Polζ, play a main role in mutagenic TLS. Second, Rev1-targeted siRNA also abrogated UV-TLS, indicating that Rev1 is also indispensable to mutagenic TLS. Third, Polη-targeted siRNA also prevented TLS to a greater extent than our expectations. Forth, although siRNA to Polι had no detectable effect, that to Polκ delayed UV-TLS. To our knowledge, this is the first study reporting apparent evidence for the participation of Polκ in UV-TLS.

  19. US Federal LCA Commons Life Cycle Inventory Unit Process Template

    Science.gov (United States)

    The US Federal LCA Commons Life Cycle Inventory Unit Process Template is a multi-sheet Excel template for life cycle inventory data, metadata and other documentation. The template comes as a package that consistent of three parts: (1) the main template itself for life cycle inven...

  20. Light-induced retinal injury enhanced neurotrophins secretion and neurotrophic effect of mesenchymal stem cells in vitro

    Directory of Open Access Journals (Sweden)

    Wei Xu

    2013-04-01

    Full Text Available PURPOSE: To investigate neurotrophins expression and neurotrophic effect change in mesenchymal stem cells (MSCs under different types of stimulation. METHODS: Rats were exposed in 10,000 lux white light to develop light-induced retinal injury. Supernatants of homogenized retina (SHR, either from normal or light-injured retina, were used to stimulate MSCs. Quantitative real time for polymerase chain reaction (RT-PCR and enzyme-linked immunosorbent assay (ELISA were conducted for analysis the expression change in basic fibroblast growth factor (bFGF, brain-derived neurotrophic factor (BDNF and ciliary neurotrophic factor (CNTF in MSCs after stimulation. Conditioned medium from SHR-stimulated MSCs and control MSCs were collected for evaluation their effect on retinal explants. RESULTS: Supernatants of homogenized retina from light-injured rats significantly promoted neurotrophins secretion from MSCs (p<0.01. Conditioned medium from mesenchymal stem cells stimulated by light-injured SHR significantly reduced DNA fragmentation (p<0.01, up-regulated bcl-2 (p<0.01 and down-regulated bax (p<0.01 in retinal explants, displaying enhanced protective effect. CONCLUSIONS: Light-induced retinal injury is able to enhance neurotrophins secretion from mesenchymal stem cells and promote the neurotrophic effect of mesenchymal stem cells.

  1. Visible Light-Induced Lipid Peroxidation of Unsaturated Fatty Acids in the Retina and the Inhibitory Effects of Blueberry Polyphenols.

    Science.gov (United States)

    Liu, Yixiang; Zhang, Di; Hu, Jimei; Liu, Guangming; Chen, Jun; Sun, Lechang; Jiang, Zedong; Zhang, Xichun; Chen, Qingchou; Ji, Baoping

    2015-10-28

    The lipid peroxidation of unsaturated fatty acids (UFAs) in the retina not only threatens visual cells but also affects the physiological health of the retina. In this work, the potential damages caused by daily visible light exposure on retinal UFAs were evaluated via a simulated in vitro model. At the same time, the benefits of dietary supplementation of blueberries to the eyes were also assessed. After prolonged light exposure, lipid peroxidation occurred for both docosahexaenoic and arachidonic acids (DHA and AA, respectively). The oxidized UFAs presented obvious cytotoxicity and significantly inhibited cell growth in retinal pigment epithelium cells. Among the different blueberry polyphenol fractions, the flavonoid-rich fraction, in which quercetin was discovered as the main component, was considerably better in preventing visible light-induced DHA lipid peroxidation than the anthocyanin- and phenolic acid-rich fractions. Then the retinal protective activity of blueberry polyphenols against light-induced retinal injury was confirmed in vivo. On the basis of the above results, inhibiting lipid peroxidation of UFAs in the retina is proposed to be another important function mechanism for antioxidants to nourish eyes.

  2. Laminin-521 Promotes Rat Bone Marrow Mesenchymal Stem Cell Sheet Formation on Light-Induced Cell Sheet Technology

    Directory of Open Access Journals (Sweden)

    Zhiwei Jiang

    2017-01-01

    Full Text Available Rat bone marrow mesenchymal stem cell sheets (rBMSC sheets are attractive for cell-based tissue engineering. However, methods of culturing rBMSC sheets are critically limited. In order to obtain intact rBMSC sheets, a light-induced cell sheet method was used in this study. TiO2 nanodot films were coated with (TL or without (TN laminin-521. We investigated the effects of laminin-521 on rBMSCs during cell sheet culturing. The fabricated rBMSC sheets were subsequently assessed to study cell sheet viability, reattachment ability, cell sheet thickness, collagen type I deposition, and multilineage potential. The results showed that laminin-521 could promote the formation of rBMSC sheets with good viability under hyperconfluent conditions. Cell sheet thickness increased from an initial 26.7 ± 1.5 μm (day 5 up to 47.7 ± 3.0 μm (day 10. Moreover, rBMSC sheets maintained their potential of osteogenic, adipogenic, and chondrogenic differentiation. This study provides a new strategy to obtain rBMSC sheets using light-induced cell sheet technology.

  3. A Single-Chain Photoswitchable CRISPR-Cas9 Architecture for Light-Inducible Gene Editing and Transcription.

    Science.gov (United States)

    Zhou, Xin X; Zou, Xinzhi; Chung, Hokyung K; Gao, Yuchen; Liu, Yanxia; Qi, Lei S; Lin, Michael Z

    2018-02-16

    Optical control of CRISPR-Cas9-derived proteins would be useful for restricting gene editing or transcriptional regulation to desired times and places. Optical control of Cas9 functions has been achieved with photouncageable unnatural amino acids or by using light-induced protein interactions to reconstitute Cas9-mediated functions from two polypeptides. However, these methods have only been applied to one Cas9 species and have not been used for optical control of different perturbations at two genes. Here, we use photodissociable dimeric fluorescent protein domains to engineer single-chain photoswitchable Cas9 (ps-Cas9) proteins in which the DNA-binding cleft is occluded at baseline and opened upon illumination. This design successfully controlled different species and functional variants of Cas9, mediated transcriptional activation more robustly than previous optogenetic methods, and enabled light-induced transcription of one gene and editing of another in the same cells. Thus, a single-chain photoswitchable architecture provides a general method to control a variety of Cas9-mediated functions.

  4. Effect of LED photobiomodulation on fluorescent light induced changes in cellular ATPases and Cytochrome c oxidase activity in Wistar rat.

    Science.gov (United States)

    A, Ahamed Basha; C, Mathangi D; R, Shyamala

    2016-12-01

    Fluorescent light exposure at night alters cellular enzyme activities resulting in health defects. Studies have demonstrated that light emitting diode photobiomodulation enhances cellular enzyme activities. The objectives of this study are to evaluate the effects of fluorescent light induced changes in cellular enzymes and to assess the protective role of pre exposure to 670 nm LED in rat model. Male Wistar albino rats were divided into 10 groups of 6 animals each based on duration of exposure (1, 15, and 30 days) and exposure regimen (cage control, exposure to fluorescent light [1800 lx], LED preexposure followed by fluorescent light exposure and only LED exposure). Na(+)-K(+) ATPase, Ca(2+) ATPase, and cytochrome c oxidase of the brain, heart, kidney, liver, and skeletal muscle were assayed. Animals of the fluorescent light exposure group showed a significant reduction in Na(+)-K(+) ATPase and Ca(2+) ATPase activities in 1 and 15 days and their increase in animals of 30-day group in most of the regions studied. Cytochrome c oxidase showed increase in their level at all the time points assessed in most of the tissues. LED light preexposure showed a significant enhancement in the degree of increase in the enzyme activities in almost all the tissues and at all the time points assessed. This study demonstrates the protective effect of 670 nm LED pre exposure on cellular enzymes against fluorescent light induced change.

  5. Protective Effect of Proanthocyanidins from Sea Buckthorn (Hippophae Rhamnoides L. Seed against Visible Light-Induced Retinal Degeneration in Vivo

    Directory of Open Access Journals (Sweden)

    Yong Wang

    2016-05-01

    Full Text Available Dietary proanthocyanidins (PACs as health-protective agents have become an important area of human nutrition research because of their potent bioactivities. We investigated the retinoprotective effects of PACs from sea buckthorn (Hippophae rhamnoides L. seed against visible light-induced retinal degeneration in vivo. Pigmented rabbits were orally administered sea buckthorn seed PACs (50 and 100 mg/kg/day for 14 consecutive days of pre-illumination and seven consecutive days of post-illumination. Retinal function was quantified via electroretinography 7 days after light exposure. Retinal damage was evaluated by measuring the thickness of the full-thickness retina and outer nuclear layer 7 days after light exposure. Sea buckthorn seed PACs significantly attenuated the destruction of electroretinograms and maintained the retinal structure. Increased retinal photooxidative damage was expressed by the depletion of glutathione peroxidase and catalase activities, the decrease of total antioxidant capacity level and the increase of malondialdehyde level. Light exposure induced a significant increase of inflammatory cytokines (IL-1β, TNF-α and IL-6 and angiogenesis (VEGF levels in retina. Light exposure upregulated the expression of pro-apoptotic proteins Bax and caspase-3 and downregulated the expression of anti-apoptotic protein Bcl-2. However, sea buckthorn seed PACs ameliorated these changes induced by light exposure. Sea buckthorn seed PACs mediated the protective effect against light-induced retinal degeneration via antioxidant, anti-inflammatory and antiapoptotic mechanisms.

  6. Protective Effect of Proanthocyanidins from Sea Buckthorn (Hippophae Rhamnoides L.) Seed against Visible Light-Induced Retinal Degeneration in Vivo.

    Science.gov (United States)

    Wang, Yong; Zhao, Liang; Huo, Yazhen; Zhou, Feng; Wu, Wei; Lu, Feng; Yang, Xue; Guo, Xiaoxuan; Chen, Peng; Deng, Qianchun; Ji, Baoping

    2016-05-02

    Dietary proanthocyanidins (PACs) as health-protective agents have become an important area of human nutrition research because of their potent bioactivities. We investigated the retinoprotective effects of PACs from sea buckthorn (Hippophae rhamnoides L.) seed against visible light-induced retinal degeneration in vivo. Pigmented rabbits were orally administered sea buckthorn seed PACs (50 and 100 mg/kg/day) for 14 consecutive days of pre-illumination and seven consecutive days of post-illumination. Retinal function was quantified via electroretinography 7 days after light exposure. Retinal damage was evaluated by measuring the thickness of the full-thickness retina and outer nuclear layer 7 days after light exposure. Sea buckthorn seed PACs significantly attenuated the destruction of electroretinograms and maintained the retinal structure. Increased retinal photooxidative damage was expressed by the depletion of glutathione peroxidase and catalase activities, the decrease of total antioxidant capacity level and the increase of malondialdehyde level. Light exposure induced a significant increase of inflammatory cytokines (IL-1β, TNF-α and IL-6) and angiogenesis (VEGF) levels in retina. Light exposure upregulated the expression of pro-apoptotic proteins Bax and caspase-3 and downregulated the expression of anti-apoptotic protein Bcl-2. However, sea buckthorn seed PACs ameliorated these changes induced by light exposure. Sea buckthorn seed PACs mediated the protective effect against light-induced retinal degeneration via antioxidant, anti-inflammatory and antiapoptotic mechanisms.

  7. [Changes of synaptoarchitecture of the retina after the light-induced damage and their correction by plant antioxidants].

    Science.gov (United States)

    Logvinov, S V; Varakuta, E Iu; Zhdankina, A A; Potapov, A V; Plotnikov, M B

    2008-01-01

    The changes of interneuronal contacts in the internal reticular layer of albino rat retina were studied 7 and 30 days after the exposure to high intensity light (6000 Lux for 6 h). In osmicated preparations, the "light" type of synapse destruction was predominant 7 days after the light-induced damage. Using the contrasting by phosphotungstic acid, paramembrane structures of the system of subsynaptic units--dense projections and postsynaptic condensations of synapses--were studied. It was found that the exposure to high intensity light resulted in the destructive changes of synapses and the decrease of their numeral density at the expense of the actively functioning symmetric contacts. 30 days after the light-induced damage, the numeral density of symmetric contacts was significantly increased, while the content of symmetric mature synapses was decreased. Course administration of ascovertine and carovertine before and after the exposure to light was found to have a differential effect on limiting the destruction of the synapses and on the activation of the repair mechanisms which are realized due to the hypertrophy and neosynaptogenesis. The highest effect was found after carovertine administration.

  8. Influence of light-induced conical intersection on the photodissociation dynamics of D2(+) starting from individual vibrational levels.

    Science.gov (United States)

    Halász, Gábor J; Csehi, András; Vibók, Ágnes; Cederbaum, Lorenz S

    2014-12-26

    Previous works have shown that dressing of diatomic molecules by standing or by running laser waves gives rise to the appearance of so-called light-induced conical intersections (LICIs). Because of the strong nonadiabatic couplings, the existence of such LICIs may significantly change the dynamical properties of a molecular system. In our former paper (J. Phys. Chem. A 2013, 117, 8528), the photodissociation dynamics of the D(2)(+) molecule were studied in the LICI framework starting the initial vibrational nuclear wave packet from the superposition of all the vibrational states initially produced by ionizing D(2). The present work complements our previous investigation by letting the initial nuclear wave packets start from different individual vibrational levels of D(2)(+), in particular, above the energy of the LICI. The kinetic energy release spectra, the total dissociation probabilities, and the angular distributions of the photofragments are calculated and discussed. An interesting phenomenon has been found in the spectra of the photofragments. Applying the light-induced adiabatic picture supported by LICI, explanations are given for the unexpected structure of the spectra.

  9. Influence of saliva-coating on the ultraviolet-light-induced photocatalytic bactericidal effects on modified titanium surfaces

    Science.gov (United States)

    Lee, Jeong-Eun; Park, So-Yoon; Chang, Young-Il; Lim, Young-Jun; Ahn, Sug-Joon

    2012-07-01

    The purpose of this study was to investigate the ultraviolet-light-induced photocatalytic bactericidal effects of titanium surfaces on Streptococcus sanguinis in the presence of saliva-coating. Three different titanium disks were prepared: machined (MA), heat-treated (HT), and anodized surfaces (AO). Each disk was incubated with whole saliva or phosphate-buffered saline for 2 h. Antibacterial tests were performed by incubating a S. sanguinis suspension with each disk for 90 or 180 min under ultraviolet (UV) illumination. The viable counts of bacteria were enumerated from the cell suspension and the UV-light-induced photocatalytic bactericidal effects were determined by the bacterial survival rate. Without saliva-coating, AO disks exhibited significantly decreased bacterial survival rates compared to MA disks. The bacterial survival rates of the HT disks were intermediate between MA and AO in the absence of saliva-coating. However, saliva-coating significantly increased bacterial survival rates in all surface types. There was no significant difference in bacterial survival rates among the three surface types after saliva-coating. This study suggests that Ti-based antibacterial implant materials using TiO2 photocatalyst may have a limitation for intraoral use.

  10. Preparation and controlled drug delivery applications of mesoporous silica polymer nanocomposites through the visible light induced surface-initiated ATRP

    Science.gov (United States)

    Huang, Long; Liu, Meiying; Mao, Liucheng; Xu, Dazhuang; Wan, Qing; Zeng, Guangjian; Shi, Yingge; Wen, Yuanqing; Zhang, Xiaoyong; Wei, Yen

    2017-08-01

    The mesoporous materials with large pore size, high specific surface area and high thermal stability have been widely utilized in a variety of fields ranging from environmental remediation to separation and biomedicine. However, surface modification of these silica nanomaterials is required to endow novel properties and achieve better performance for most of these applications. In this work, a new method has been established for surface modification of mesoporous silica nanoparticles (MSNs) that relied on the visible light induced atom transfer radical polymerization (ATRP). In the procedure, the copolymers composited with itaconic acid (IA) and poly(ethylene glycol)methyl acrylate (PEGMA) were grafted from MSNs using IA and PEGMA as the monomers and 10-Phenylphenothiazine(PTH) as the organic catalyst. The successful preparation of final polymer nanocomposites (named as MSNs-NH2-poly(IA-co-PEGMA)) were evidenced by a series of characterization techniques. More importantly, the anticancer agent cisplatin can be effectively loaded on MSNs-NH2-poly(IA-co-PEGMA) and controlled release it from the drug-loading composites with pH responsive behavior. As compared with conventional ATRP, the light induced surface-initiated ATRP could also be utilized for preparation of various silica polymer nanocomposites under rather benign conditions (e.g. absent of transition metal ions, low polymerization temperature and short polymerization time). Taken together, we have developed a rather promising strategy method for fabrication of multifunctional MSNs-NH2-poly(IA-co-PEGMA) with great potential for biomedical applications.

  11. Light-induced and sensing capabilities of SI-ATRP modified graphene oxide particles in elastomeric matrix

    Science.gov (United States)

    Osicka, Josef; Cvek, Martin; Mrlik, Miroslav; Ilcikova, Marketa; Pavlinek, Vladimir; Mosnacek, Jaroslav

    2017-04-01

    Photoactuators can concern light stimuli in appropriate wavelength into mechanical response. Such reversible changes in the material shape are highly promising in their applications as remote controllers, or safety sensors. In this work we were focused on light-induced actuation and sensing performance of the prepared materials. In this case poly(dimethyl siloxane) PDMS with various amounts of silicone oil and curing agent was used as matrix. Graphene oxide (GO) as filler in its neat form as well as its modified analogue were used in concentration of 0.1 vol. %. Modified GO particles were controllably coated with poly(methyl methacrylate) polymer chains using surface-initiated atom transfer radical polymerization (SI-ATRP) approach in order improve interactions between the filler and matrix which consequently lead to the enhanced light-induced actuation performance. Generally, the both, GO particles as well as modified ones were characterized using FTIR, Raman spectroscopy and finally conductivity measurement to confirm the controllable coating and simultaneously proceeded reduction. By studying of dielectric properties (activation energies), viscoelastic properties, which were investigated using dynamic mechanical analysis, the interactions between the filler and matrix were evaluated with connection to their light-responsive and sensing capabilities.

  12. Laser acceleration

    Science.gov (United States)

    Tajima, T.; Nakajima, K.; Mourou, G.

    2017-02-01

    The fundamental idea of Laser Wakefield Acceleration (LWFA) is reviewed. An ultrafast intense laser pulse drives coherent wakefield with a relativistic amplitude robustly supported by the plasma. While the large amplitude of wakefields involves collective resonant oscillations of the eigenmode of the entire plasma electrons, the wake phase velocity ˜ c and ultrafastness of the laser pulse introduce the wake stability and rigidity. A large number of worldwide experiments show a rapid progress of this concept realization toward both the high-energy accelerator prospect and broad applications. The strong interest in this has been spurring and stimulating novel laser technologies, including the Chirped Pulse Amplification, the Thin Film Compression, the Coherent Amplification Network, and the Relativistic Mirror Compression. These in turn have created a conglomerate of novel science and technology with LWFA to form a new genre of high field science with many parameters of merit in this field increasing exponentially lately. This science has triggered a number of worldwide research centers and initiatives. Associated physics of ion acceleration, X-ray generation, and astrophysical processes of ultrahigh energy cosmic rays are reviewed. Applications such as X-ray free electron laser, cancer therapy, and radioisotope production etc. are considered. A new avenue of LWFA using nanomaterials is also emerging.

  13. Monosaccharide templates for de novo designed 4-alpha-helix bundle proteins: template effects in carboproteins

    DEFF Research Database (Denmark)

    Brask, Jesper; Dideriksen, J.M.; Nielsen, John

    2003-01-01

    Da 4-alpha-helix bundles by oxime ligation of tetra-aminooxyacetyl functionalized D-galacto-, D-gluco-, and D-altropyranoside templates with an amphiphilic C- terminal hexadecapeptide aldehyde sequence. CD spectroscopy indicated that the choice of template has an effect on the overall structure...

  14. Conversion of Radiology Reporting Templates to the MRRT Standard.

    Science.gov (United States)

    Kahn, Charles E; Genereaux, Brad; Langlotz, Curtis P

    2015-10-01

    In 2013, the Integrating the Healthcare Enterprise (IHE) Radiology workgroup developed the Management of Radiology Report Templates (MRRT) profile, which defines both the format of radiology reporting templates using an extension of Hypertext Markup Language version 5 (HTML5), and the transportation mechanism to query, retrieve, and store these templates. Of 200 English-language report templates published by the Radiological Society of North America (RSNA), initially encoded as text and in an XML schema language, 168 have been converted successfully into MRRT using a combination of automated processes and manual editing; conversion of the remaining 32 templates is in progress. The automated conversion process applied Extensible Stylesheet Language Transformation (XSLT) scripts, an XML parsing engine, and a Java servlet. The templates were validated for proper HTML5 and MRRT syntax using web-based services. The MRRT templates allow radiologists to share best-practice templates across organizations and have been uploaded to the template library to supersede the prior XML-format templates. By using MRRT transactions and MRRT-format templates, radiologists will be able to directly import and apply templates from the RSNA Report Template Library in their own MRRT-compatible vendor systems. The availability of MRRT-format reporting templates will stimulate adoption of the MRRT standard and is expected to advance the sharing and use of templates to improve the quality of radiology reports.

  15. In search of the song template.

    Science.gov (United States)

    Adret, Patrice

    2004-06-01

    The auditory template theory-the conversion of memorized song to produced song using feedback as an error-correction mechanism-is central to neurobiological studies of birdsong learning. The essence of the theory is the construction of a complex sound replica based on a set of both genetic and environmental instructions. These premises, as yet unchallenged, have stimulated much research on the process of vocal imitation. Two somewhat distinct, but closely related streams of research have emerged. One seeks to determine the neural mechanisms that underlie the formation, storage, and retrieval of vocal memories as a consequence of experience during a sensitive phase-the template concept in its purest form. The other aims at establishing an explanatory basis for genetically based species differences in auditory responsiveness; here, the prime focus is on innately specified templates that guide learning preferences in young, naïve birds. The chapter begins with an historical overview of conceptual issues. Then recent progress in the attempt to characterize template properties is reviewed, focusing on selected studies of sparrows, nightingales, and zebra finches. The chapter concludes with a discussion of research strategy and tactics, including suggestions for criteria that must be met in identifying neural substrates for template specification and localization. The chapter is intended to provide a conceptual framework for further progress in this critical area.

  16. Accelerators and the Accelerator Community

    Energy Technology Data Exchange (ETDEWEB)

    Malamud, Ernest; Sessler, Andrew

    2008-06-01

    In this paper, standing back--looking from afar--and adopting a historical perspective, the field of accelerator science is examined. How it grew, what are the forces that made it what it is, where it is now, and what it is likely to be in the future are the subjects explored. Clearly, a great deal of personal opinion is invoked in this process.

  17. Increased susceptibility to fundus camera-delivered light-induced retinal degeneration in mice deficient in oxidative stress response proteins.

    Science.gov (United States)

    Ding, Yi; Aredo, Bogale; Zhong, Xin; Zhao, Cynthia X; Ufret-Vincenty, Rafael L

    2017-06-01

    Oxidative stress is an important contributor to the pathogenesis of many retinal diseases including age-related macular degeneration and retinal dystrophies. Light-induced retinal degeneration (LIRD) can serve as a model in which to study the response of the retina to stress. Of note, many genetic mutant mice are in a C57BL/6 J background and are thus resistant to the usual LIRD models. We recently developed a new model of fundus camera-delivered light-induced retinal degeneration (FCD-LIRD) which is effective in strains of mice expressing the light-resistant variant of RPE65 (450Met), including C57BL/6 J. In this work we investigated whether FCD-LIRD would be useful as a model in which to test the effect of genetic mutations on the response of the retina to stress. Furthermore, we tested whether oxidative stress plays an important role in the setting of this new FCD-LIRD model. FCD-LIRD was applied to C57BL/6 J mice and to mice simultaneously deficient in three proteins that are important in the response of the retina to oxidative stress (SOD1, DJ-1 and Parkin). Using fundus photography, we found that retinal damage was dramatically increased in the SOD1/DJ-1/Parkin deficient mice compared to C57BL/6 J. Outer retinal OCT volume and RPE cell morphology analysis in ZO-1-stained flat mounts added support to these findings. Gene expression analysis confirmed a strong oxidative stress response after FCD-LIRD, which was differentially altered in the SOD1/DJ1/Parkin deficient mice. We conclude that FCD-LIRD is useful to study the effect of genetic mutations on the response of the retina to light stress in light-resistant strains of mice. Furthermore, oxidative stress seems to be an important component of FCD-LIRD. Finally, we have established protocols to quantify the effect of FCD-LIRD on the retina and RPE which will be useful for future studies. Further dissection of the mechanisms by which the retina responds to light-induced oxidative stress may result in new

  18. Learning probabilistic document template models via interaction

    Science.gov (United States)

    Ahmadullin, Ildus; Damera-Venkata, Niranjan

    2013-03-01

    Document aesthetics measures are key to automated document composition. Recently we presented a probabilistic document model (PDM) which is a micro-model for document aesthetics based on a probabilistic modeling of designer choice in document design. The PDM model comes with efficient layout synthesis algorithms once the aesthetic model is defined. A key element of this approach is an aesthetic prior on the parameters of a template encoding aesthetic preferences for template parameters. Parameters of the prior were required to be chosen empirically by designers. In this work we show how probabilistic template models (and hence the PDM cost function) can be learnt directly by observing a designer making design choices in composing sample documents. From such training data our learning approach can learn a quality measure that can mimic some of the design tradeoffs a designer makes in practice.

  19. A Hybrid Approach to Protect Palmprint Templates

    Directory of Open Access Journals (Sweden)

    Hailun Liu

    2014-01-01

    Full Text Available Biometric template protection is indispensable to protect personal privacy in large-scale deployment of biometric systems. Accuracy, changeability, and security are three critical requirements for template protection algorithms. However, existing template protection algorithms cannot satisfy all these requirements well. In this paper, we propose a hybrid approach that combines random projection and fuzzy vault to improve the performances at these three points. Heterogeneous space is designed for combining random projection and fuzzy vault properly in the hybrid scheme. New chaff point generation method is also proposed to enhance the security of the heterogeneous vault. Theoretical analyses of proposed hybrid approach in terms of accuracy, changeability, and security are given in this paper. Palmprint database based experimental results well support the theoretical analyses and demonstrate the effectiveness of proposed hybrid approach.

  20. Three-particle templates for boosted Higgs

    CERN Document Server

    Almeida, Leandro G; Juknevich, José; Lee, Seung J; Perez, Gilad; Sterman, George

    2012-01-01

    We explore the ability of three-particle templates to distinguish color neutral objects from QCD background. This method is particularly useful to identify the standard model Higgs, as well as other massive neutral particles. Simple cut-based analysis in the overlap distributions of the signal and background is shown to provide a significant rejection power. By combining with other discriminating variables, such as planar flow, and several variables that depend on the partonic template, three-particle templates are used to characterize the influence of gluon emission and color flow in collider events. The performance of the method is discussed for the case of a highly boosted Higgs in association with a leptonically-decaying W boson.

  1. Polymer templated nickel cobaltate for energy storage★

    Directory of Open Access Journals (Sweden)

    Albohani Shaymaa

    2017-01-01

    Full Text Available In order to take advantage of the increasing sophistication of technology for harnessing renewable energy resources, serious attention must be paid to how to store and re-access this energy. Electrochemical storage, in the guise of batteries, supercapacitors and pseudocapacitors, has attracted much attention as a viable option for enhanced energy storage applications. But in order for these technologies to be implemented successfully we need to find materials that perform better and are relatively easy to synthesise. Bimetallic transition metal oxides are materials that are readily synthesised and may be multifunctional, i.e. have a role at the electrochemical atomic level as well as the device level. In order for these materials to work efficiently in new generation systems based on sodium and lithium they also need to be mesoporous. This can be achieved by trying to find synthetic techniques that produce specific, highly regulated nanostructures or by adding a ‘templating’ agent during the bulk synthesis step. We have investigated the simple hydrothermal preparation of a number of nickel cobaltate (NiCo2O4 materials using polymer templates, eggshell membrane (ESM and poly methyl methacrylate (PMMA, as potential electrode materials for supercapacitors. The ESM was expected to act as a fibrous, random polymeric template while the PMMA should produce a much more ordered material. Electrochemical testing showed that the different templates have led to changes in material morphology and these have resulted in a difference in electrochemical properties. Templated materials increased specific capacitance compared to non-templated and the choice of template could influence the capacitance by as much as 30%.

  2. accelerating cavity

    CERN Multimedia

    On the inside of the cavity there is a layer of niobium. Operating at 4.2 degrees above absolute zero, the niobium is superconducting and carries an accelerating field of 6 million volts per metre with negligible losses. Each cavity has a surface of 6 m2. The niobium layer is only 1.2 microns thick, ten times thinner than a hair. Such a large area had never been coated to such a high accuracy. A speck of dust could ruin the performance of the whole cavity so the work had to be done in an extremely clean environment.

  3. 2D vector-cyclic deformable templates

    DEFF Research Database (Denmark)

    Schultz, Nette; Conradsen, Knut

    1998-01-01

    matrices applied to the vector cycle. An approximation in the parameter distribution is introduced. The main advantage by using the deformable template model is the ability to simulate a wide range of objects trained by e.g. their biological variations, and thereby improve restoration, segmentation...... and probabillity measurement. The case study concerns estimation of meat percent in pork carcasses. Given two cross-sectional images - one at the front and one near the ham of the carcass - the areas of lean and fat and a muscle in the lean area are measured automatically by the deformable templates....

  4. Preparation of porous lanthanum phosphate with templates

    Energy Technology Data Exchange (ETDEWEB)

    Onoda, Hiroaki, E-mail: onoda@kpu.ac.jp [Department of Informatics and Environmental Sciences, Faculty of Life and Environmental Sciences, Kyoto Prefectural University, 1-5, Shimogamo Nakaragi-cyo, Sakyo-ku, Kyoto 606-8522 (Japan); Ishima, Yuya [Department of Applied Chemistry, Faculty of Life Sciences, Ritsumeikan University, 1-1-1, Nojihigashi, Kusatsu, Shiga 525-8577 (Japan); Takenaka, Atsushi [Department of Materials Science, Yonago National College of Technology, 4448, Hikona-cho, Yonago, Tottori 683-8502 (Japan); Tanaka, Isao [Department of Materials Science and Engineering, Faculty of Engineering, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501 (Japan)

    2009-08-05

    Malonic acid, propionic acid, glycine, n-butylamine, and urea were added to the preparation of lanthanum phosphate from lanthanum nitrate and phosphoric acid solutions. All additives were taken into lanthanum phosphate particles. The additives that have a basic site were easy to contain in precipitates. The addition of templates improved the specific surface area of lanthanum phosphate. The amount of pore, with radius smaller than 4 nm, increased with the addition of templates. The remained additives had influence on the acidic properties of lanthanum phosphate.

  5. Affordance Templates for Shared Robot Control

    Science.gov (United States)

    Hart, Stephen; Dinh, Paul; Hambuchen, Kim

    2014-01-01

    This paper introduces the Affordance Template framework used to supervise task behaviors on the NASA-JSC Valkyrie robot at the 2013 DARPA Robotics Challenge (DRC) Trials. This framework provides graphical interfaces to human supervisors that are adjustable based on the run-time environmental context (e.g., size, location, and shape of objects that the robot must interact with, etc.). Additional improvements, described below, inject degrees of autonomy into instantiations of affordance templates at run-time in order to enable efficient human supervision of the robot for accomplishing tasks.

  6. Introduction to ASPNET 4 AJAX Client Templates

    CERN Document Server

    Shoemaker, Craig

    2010-01-01

    This Wrox Blox will teach you how to create and customize ASP.NET 4 AJAX Preview 4 Client Templates. The author shows you how to use declarative as well as imperative data-binding techniques to address the simple to advanced UI requirements. He also covers how the observer pattern is fully implemented in ASP.NET 4 AJAX and, when used in conjunction with the Client Template markup extensions, provides a developer experience much like XAML-based applications like WPF and Silverlight. This Wrox Blox walks you through how to implement examples that fetch data from ASP.NET Web Forms using Page Meth

  7. Visible Light Induced Photocatalytic Activity of Polyaniline Modified TiO2 and Clay-TiO2 Composites

    Directory of Open Access Journals (Sweden)

    K.P. Sandhya

    2013-12-01

    Full Text Available Sonochemical synthesis of Titania, Titania-Polyaniline, and Clay-Titania-Polyaniline composites were car-ried out. The composite systems were characterized by various physico-chemical techniques. Photocatalytic activity was tested selecting some common dyes as substrates. Composites exhibited higher activity for the degradation of dyes under visible light in most of the cases. © 2013 BCREC UNDIP. All rights reservedReceived: 15th May 2013; Revised: 1st September 2013; Accepted: 3rd October 2013[How to Cite: Sandhya, K.P., Haridas, S., Sugunan, S. (2013. Visible Light Induced Photocatalytic Activity of Polyaniline Modified TiO2 and Clay-TiO2 Composites. Bulletin of Chemical Reaction Engineering & Catalysis, 8 (2: 145-153. (doi:10.9767/bcrec.8.2.4949.145-153][Permalink/DOI: http://dx.doi.org/10.9767/bcrec.8.2.4949.145-153

  8. Molecular-scale dynamics of light-induced spin cross-over in a two-dimensional layer

    Science.gov (United States)

    Bairagi, Kaushik; Iasco, Olga; Bellec, Amandine; Kartsev, Alexey; Li, Dongzhe; Lagoute, Jérôme; Chacon, Cyril; Girard, Yann; Rousset, Sylvie; Miserque, Frédéric; Dappe, Yannick J.; Smogunov, Alexander; Barreteau, Cyrille; Boillot, Marie-Laure; Mallah, Talal; Repain, Vincent

    2016-07-01

    Spin cross-over molecules show the unique ability to switch between two spin states when submitted to external stimuli such as temperature, light or voltage. If controlled at the molecular scale, such switches would be of great interest for the development of genuine molecular devices in spintronics, sensing and for nanomechanics. Unfortunately, up to now, little is known on the behaviour of spin cross-over molecules organized in two dimensions and their ability to show cooperative transformation. Here we demonstrate that a combination of scanning tunnelling microscopy measurements and ab initio calculations allows discriminating unambiguously between both states by local vibrational spectroscopy. We also show that a single layer of spin cross-over molecules in contact with a metallic surface displays light-induced collective processes between two ordered mixed spin-state phases with two distinct timescale dynamics. These results open a way to molecular scale control of two-dimensional spin cross-over layers.

  9. Synthesis of surface oxygen-deficient BiPO{sub 4} nanocubes with enhanced visible light induced photocatalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Bingtao; Yin, Haoyong; Li, Tao; Gong, Jianying; Lv, Shumei; Nie, Qiulin, E-mail: yhy@hdu.edu.cn [College of Materials & Environmental Engineering, Hangzhou Dianzi University, Hangzhou (China)

    2017-05-15

    The visible light driven BiPO{sub 4} nanocubes with sufficient surface oxygen deficiency were fabricated by a hydrothermal process and subsequently ultrasonic assistant Fe reduction process. The products were characterized by XRD, DRS, XPS, SEM and TEM which showed that the BiPO{sub 4} had cuboid-like shape with a smooth surface and clear edges and the oxygen vacancies were successfully introduced on the surface of the BiPO{sub 4} nanocubes. The as prepared oxygen-deficient BiPO{sub 4} nanocubes showed greatly enhanced visible light induced photocatalytic activity in degradation of Rhodamine B. The enhanced photocatalytic performance and expanded visible light response of BiPO{sub 4} may be due to the introduction of surface oxygen vacancies which can generate the oxygen vacancies mid-gap states lower to the conduction band of BiPO{sub 4}. (author)

  10. [Changes in vectors of endogenously generated ion currents in light-induced germination of turions of Spirodela polyrrhiza].

    Science.gov (United States)

    Sokolovskiĭ, S G; Appenroth, K J

    2002-01-01

    Nondormant turions of Spirodela polyrhiza (L.) Schleiden were utilized to investigate endogenous ion currents in light-induced germination and early growing processes of higher plants. A small outward current was detected at the ventral side of the turions near the pocket containing the most developed sprout primordium. After a light pulse, the direction of the endogenous current changed from outward to inward. These ion currents are most likely conditioned by unspecific diffusion of cations (probably H+) inside the cell. Three-day-old sprouts of Spirodela showed the highest inward current near the sprout base which decreases toward its edge. Newly formed sprouts demonstrated a strong gravity effect (bending), which was preceded by a lowering of the Z-component of vectors close to the sprout base after a change of the turion fixation.

  11. Light-induced phase-shifting of the peripheral circadian oscillator in the hearts of food-deprived mice.

    Science.gov (United States)

    Sakamoto, Katsuhiko; Kadota, Koji; Oishi, Katsutaka

    2004-10-01

    In the present study, we investigated the effect of fasting on photoentrainment of the peripheral circadian oscillator in the mammalian heart. Northern blotting showed that a single light pulse applied at an appropriate time in constant darkness, caused obvious phase-shifting in the circadian expression rhythm of the mammalian clock gene Period2 (mPer2) even in the hearts of food-deprived mice. Fasting did not significantly affect either the phase or the light-induced phase-shifts of the mPer2 rhythm. Although several studies of temporal feeding restriction have indicated that feeding is the dominant timing cue for mammalian peripheral oscillators, our findings suggest that feeding is not essential for mammals to induce phase resetting of the circadian oscillator in the heart.

  12. Engineering light-inducible nuclear localization signals for precise spatiotemporal control of protein dynamics in living cells.

    Science.gov (United States)

    Niopek, Dominik; Benzinger, Dirk; Roensch, Julia; Draebing, Thomas; Wehler, Pierre; Eils, Roland; Di Ventura, Barbara

    2014-07-14

    The function of many eukaryotic proteins is regulated by highly dynamic changes in their nucleocytoplasmic distribution. The ability to precisely and reversibly control nuclear translocation would, therefore, allow dissecting and engineering cellular networks. Here we develop a genetically encoded, light-inducible nuclear localization signal (LINuS) based on the LOV2 domain of Avena sativa phototropin 1. LINuS is a small, versatile tag, customizable for different proteins and cell types. LINuS-mediated nuclear import is fast and reversible, and can be tuned at different levels, for instance, by introducing mutations that alter AsLOV2 domain photo-caging properties or by selecting nuclear localization signals (NLSs) of various strengths. We demonstrate the utility of LINuS in mammalian cells by controlling gene expression and entry into mitosis with blue light.

  13. Light induces Fos expression via extracellular signal-regulated kinases 1/2 in melanopsin-expressing PC12 cells

    DEFF Research Database (Denmark)

    Moldrup, Marie-Louise Bülow; Georg, Birgitte; Falktoft, Birgitte

    2010-01-01

    and the cells respond to light by a membrane depolarization and induction of the immediate early response gene Fos. Previous studies showed that the light activated melanopsin-induced signaling, the phototransduction, leading to depolarization of the membrane resembles the invertebrate opsins, which involves......-regulated protein kinase 1/2 (ERK1/2) was found as pharmacological blockage of this kinase suppressed the light-induced Fos expression. Illumination increased the inositol phosphate turnover and induced phosphorylation of ERK1/2 and p38 but not the c-Jun N-terminal kinase. The Galpha(q/11) protein inhibitor YM......254890 attenuated these intracellular light responses. Our data strongly indicate that Galpha(q/11)-mediated ERK1/2 activation is essential for expression of Fos upon illumination of melanopsin-expressing PC12 cells....

  14. Light-induced immobilisation of biomolecules as an attractive alternative to microdroplet dispensing-based arraying technologies

    DEFF Research Database (Denmark)

    Crookshanks, Meg; Skovsen, Esben; Petersen, Maria Teresa Neves

    2007-01-01

    The present work shows how UV ‘light-induced molecular immobilisation' (LIMI) of biomolecules onto thiol reactive surfaces can be used to make biosensors, without the need for traditional microdispensing technologies. Using ‘LIMI,' arrays of biomolecules can be created with a high degree...... of reproducibility. This technology can be used to circumvent the need for often expensive nano/microdispensing technologies. The ultimate size of the immobilised spots is defined by the focal area of the UV beam, which for a diffraction-limited beam can be less than 1 mm in diameter. LIMI has the added benefit...... that the immobilised molecules will be spatially oriented and covalently bound to the surface. The activity of the sensor molecules is retained. Antibody sensor arrays made using LIMI demonstrated successful antigen binding. In addition, the pattern of immobilised molecules on the surface is not restricted...

  15. Controlling Nanostructures by Templated Templates: Inheriting Molecular Orientation in Binary Heterostructures.

    Science.gov (United States)

    Breuer, Tobias; Witte, Gregor

    2015-09-16

    Precise preparation strategies are required to fabricate molecular nanostructures of specific arrangement. In bottom-up approaches, where nanostructures are gradually formed by piecing together individual parts to the final structure, the self-ordering mechanisms of the involved structures are utilized. In order to achieve the desired structures regarding morphology, grain size, and orientation of the individual moieties, templates can be applied, which influence the formation process of subsequent structures. However, this strategy is of limited use for complex architectures because the templates only influence the structure formation at the interface between the template and the first compound. Here, we discuss the implementation of so-called templated templates and analyze to what extent orientations of the initial layers are inherited in the top layers of another compound to enable structural control in binary heterostructures. For that purpose, we prepared crystalline templates of the organic semiconductors pentacene and perfluoropentacene in different exclusive orientations. We observe that for templates of both individual materials the molecular orientation is inherited in the top layers of the respective counterpart. This behavior is also observed for various other molecules, indicating the robustness of this approach.

  16. Dynamic Blue Light-Inducible T7 RNA Polymerases (Opto-T7RNAPs) for Precise Spatiotemporal Gene Expression Control.

    Science.gov (United States)

    Baumschlager, Armin; Aoki, Stephanie K; Khammash, Mustafa

    2017-11-17

    Light has emerged as a control input for biological systems due to its precise spatiotemporal resolution. The limited toolset for light control in bacteria motivated us to develop a light-inducible transcription system that is independent from cellular regulation through the use of an orthogonal RNA polymerase. Here, we present our engineered blue light-responsive T7 RNA polymerases (Opto-T7RNAPs) that show properties such as low leakiness of gene expression in the dark state, high expression strength when induced with blue light, and an inducible range of more than 300-fold. Following optimization of the system to reduce expression variability, we created a variant that returns to the inactive dark state within minutes once the blue light is turned off. This allows for precise dynamic control of gene expression, which is a key aspect for most applications using optogenetic regulation. The regulators, which only require blue light from ordinary light-emitting diodes for induction, were developed and tested in the bacterium Escherichia coli, which is a crucial cell factory for biotechnology due to its fast and inexpensive cultivation and well understood physiology and genetics. Opto-T7RNAP, with minor alterations, should be extendable to other bacterial species as well as eukaryotes such as mammalian cells and yeast in which the T7 RNA polymerase and the light-inducible Vivid regulator have been shown to be functional. We anticipate that our approach will expand the applicability of using light as an inducer for gene expression independent from cellular regulation and allow for a more reliable dynamic control of synthetic and natural gene networks.

  17. The biogeochemical cycle of the adsorbed template. II - Selective adsorption of mononucleotides on adsorbed polynucleotide templates

    Science.gov (United States)

    Lazard, Daniel; Lahav, Noam; Orenberg, James B.

    1988-01-01

    Experimental results are presented for the verification of the specific interaction step of the 'adsorbed template' biogeochemical cycle, a simple model for a primitive prebiotic replication system. The experimental system consisted of gypsum as the mineral to which an oligonucleotide template attaches (Poly-C or Poly-U) and (5-prime)-AMP, (5-prime)-GMP, (5-prime)-CMP and (5-prime)-UMP as the interacting biomonomers. When Poly-C or Poly-U were used as adsorbed templates, (5-prime)-GMP and (5-prime)-AMP, respectively, were observed to be the most strongly adsorbed species.

  18. Triggered Templated Assembly of Protein Polymersomes

    NARCIS (Netherlands)

    Li, F.; Wolf, de F.A.; Marcelis, A.T.M.; Sudhölter, E.J.R.; Stuart, M.A.C.; Leermakers, F.A.M.

    2010-01-01

    Trigger the block: Stable biocompatible protein polymersomes can be generated by a triggered templated self-assembly route (see picture). Pluronic L121 vesicles (red core with blue corona) take up a biosynthetic triblock copolymer CSXSXC into their unilamellar shell. In response to changes in pH

  19. Template Based Low Data Rate Speech Encoder

    Science.gov (United States)

    1993-09-30

    95 with unquantized parameters. 9" Frame size 20 ms is preferred Excelent (Our choice) 95 "•. FrmeSietme Fig. 2 - Frame size vs. spech ...synthesized from the filter coefficients selected from the reference templates that are free from nonspeech sounds. We again use a similar technique but take it

  20. Organic or organometallic template mediated clay synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Gregar, K.C.; Winans, R.E.; Botto, R.E.

    1992-12-31

    A method is given for incorporating diverse varieties of intercalants or templates directly during hydrothermal synthesis of clays such as hectorite or montmorillonite-type layer-silicate clays. For a hectorite layer-silicate clay, refluxing a gel of silica sol, magnesium hydroxide sol and LiF for 2 days with an organic or organometallic intercalant or template results in crystalline products containing either (a) organic dye molecules such as ethyl violet and methyl green, (b) dye molecules such as alcian blue based on a Cu(II)-phthalocyannine complex, or (c) transition metal complexes such as Ru(II)phenanthroline and Co(III)sepulchrate or (d) water-soluble porphyrins and metalloporphyrins. Montmorillonite-type clays are made by the method taught by US patent No. 3,887,454 issued to Hickson, June 13, 1975; however, a variety of intercalants or templates may be introduced. The intercalants or templates should have water-solubility, positive charge, and thermal stability under moderately basic (pH 9-10) aqueous reflux conditions or hydrothermal pressurized conditions for the montmorillonite-type clays.

  1. Performance Templates and the Regulation of Learning

    Science.gov (United States)

    Lyons, Paul

    2009-01-01

    Purpose: The purpose of this paper is to provide a detailed, theoretical underpinning for the training and performance improvement method: performance template (P-T). The efficacy of P-T, with limitations, has been demonstrated in this journal and in others. However, the theoretical bases of the P-T approach had not been well-developed. The other…

  2. Recyclable Waste Paper Sorting Using Template Matching

    Science.gov (United States)

    Osiur Rahman, Mohammad; Hussain, Aini; Scavino, Edgar; Hannan, M. A.; Basri, Hassan

    This paper explores the application of image processing techniques in recyclable waste paper sorting. In recycling, waste papers are segregated into various grades as they are subjected to different recycling processes. Highly sorted paper streams will facilitate high quality end products, and save processing chemicals and energy. Since 1932 to 2009, different mechanical and optical paper sorting methods have been developed to fill the demand of paper sorting. Still, in many countries including Malaysia, waste papers are sorted into different grades using manual sorting system. Due to inadequate throughput and some major drawbacks of mechanical paper sorting systems, the popularity of optical paper sorting systems is increased. Automated paper sorting systems offer significant advantages over human inspection in terms of fatigue, throughput, speed, and accuracy. This research attempts to develop a smart vision sensing system that able to separate the different grades of paper using Template Matching. For constructing template database, the RGB components of the pixel values are used to construct RGBString for template images. Finally, paper object grade is identified based on the maximum occurrence of a specific template image in the search image. The outcomes from the experiment in classification for White Paper, Old Newsprint Paper and Old Corrugated Cardboard are 96%, 92% and 96%, respectively. The remarkable achievement obtained with the method is the accurate identification and dynamic sorting of all grades of papers using simple image processing techniques.

  3. Surgical Templates for Dental Implant Positioning; Current ...

    African Journals Online (AJOL)

    Surgical templates for dental implant. 5. Nigerian Journal of Surgery. Jan‑Jun 2015 | Volume 21 | Issue 1. 18. Tarlow JL. Fabrication of an implant surgical stent for the edentulous mandible. J Prosthet Dent 1992;67:217‑8. 19. Stellino G, Morgano SM, Imbelloni A. A dual‑purpose, implant stent made from a provisional fixed ...

  4. Ceramic microfluidic monoliths by ice templating

    NARCIS (Netherlands)

    Zheng, Jumeng; Salamon, David; Lefferts, Leonardus; Wessling, Matthias; Winnubst, Aloysius J.A.

    2010-01-01

    Meso/macro-porous alumina microfluidic monoliths were fabricated by an ice-templating (or freeze-casting) technique. A (green) compact with sufficient strength is obtained after controlled freezing and simple drying under ambient conditions by starting with an aqueous suspension of a mixture of

  5. A TSR Visual Servoing System Based on a Novel Dynamic Template Matching Method

    Directory of Open Access Journals (Sweden)

    Jia Cai

    2015-12-01

    Full Text Available The so-called Tethered Space Robot (TSR is a novel active space debris removal system. To solve its problem of non-cooperative target recognition during short-distance rendezvous events, this paper presents a framework for a real-time visual servoing system using non-calibrated monocular-CMOS (Complementary Metal Oxide Semiconductor. When a small template is used for matching with a large scene, it always leads to mismatches, so a novel template matching algorithm to solve the problem is presented. Firstly, the novel matching algorithm uses a hollow annulus structure according to a FAST (Features from Accelerated Segment algorithm and makes the method be rotation-invariant. Furthermore, the accumulative deviation can be decreased by the hollow structure. The matching function is composed of grey and gradient differences between template and object image, which help it reduce the effects of illumination and noises. Then, a dynamic template update strategy is designed to avoid tracking failures brought about by wrong matching or occlusion. Finally, the system synthesizes the least square integrated predictor, realizing tracking online in complex circumstances. The results of ground experiments show that the proposed algorithm can decrease the need for sophisticated computation and improves matching accuracy.

  6. Computational templates for introductory nuclear science using mathcad

    Science.gov (United States)

    Sarantites, D. G.; Sobotka, L. G.

    2013-01-01

    Computational templates used to teach an introductory course in nuclear chemistry and physics at Washington University in St. Louis are presented in brief. The templates cover both basic and applied topics.

  7. Visual cluster analysis and pattern recognition template and methods

    Science.gov (United States)

    Osbourn, Gordon Cecil; Martinez, Rubel Francisco

    1999-01-01

    A method of clustering using a novel template to define a region of influence. Using neighboring approximation methods, computation times can be significantly reduced. The template and method are applicable and improve pattern recognition techniques.

  8. Emergency department documentation templates: variability in template selection and association with physical examination and test ordering in dizziness presentations

    Directory of Open Access Journals (Sweden)

    Meurer William J

    2011-03-01

    Full Text Available Abstract Background Clinical documentation systems, such as templates, have been associated with process utilization. The T-System emergency department (ED templates are widely used but lacking are analyses of the templates association with processes. This system is also unique because of the many different template options available, and thus the selection of the template may also be important. We aimed to describe the selection of templates in ED dizziness presentations and to investigate the association between items on templates and process utilization. Methods Dizziness visits were captured from a population-based study of EDs that use documentation templates. Two relevant process outcomes were assessed: head computerized tomography (CT scan and nystagmus examination. Multivariable logistic regression was used to estimate the probability of each outcome for patients who did or did not receive a relevant-item template. Propensity scores were also used to adjust for selection effects. Results The final cohort was 1,485 visits. Thirty-one different templates were used. Use of a template with a head CT item was associated with an increase in the adjusted probability of head CT utilization from 12.2% (95% CI, 8.9%-16.6% to 29.3% (95% CI, 26.0%-32.9%. The adjusted probability of documentation of a nystagmus assessment increased from 12.0% (95%CI, 8.8%-16.2% when a nystagmus-item template was not used to 95.0% (95% CI, 92.8%-96.6% when a nystagmus-item template was used. The associations remained significant after propensity score adjustments. Conclusions Providers use many different templates in dizziness presentations. Important differences exist in the various templates and the template that is used likely impacts process utilization, even though selection may be arbitrary. The optimal design and selection of templates may offer a feasible and effective opportunity to improve care delivery.

  9. Business Process Variability : A Tool for Declarative Template Design

    NARCIS (Netherlands)

    Bulanov, P.; Groefsema, H.; Aiello, M.

    2012-01-01

    To lower both implementation time and cost, many Business Process Management tools use process templates to implement highly recurring processes. However, in order for such templates to be used, a process has to adhere substantially to the template. Therefore, current practice for processes which

  10. Templated electrodeposition of functional nanostructures: nanowires, nanotubes and nanocubes

    NARCIS (Netherlands)

    Maijenburg, A.W.

    2014-01-01

    This thesis is entitled “Templated electrodeposition of functional nanostructures: nanowires, nanotubes and nanocubes”. Templated electrodeposition is the synthesis technique that was used throughout this thesis, and it comprises the use of a template with specific shape and dimensions for the

  11. FDG-PET template MNI152 1mm

    DEFF Research Database (Denmark)

    2013-01-01

    A FDG-PET template in MNI space aligned to the MNI152 atlas This PET-FDG template is provided as is free of charge for all purposes, provided that the following paper is cited......(to appear) when ever the template is used. The authors cannot, under any circumstances, be held responsible for any...

  12. Assessing ligand efficiencies using template-based molecular ...

    Indian Academy of Sciences (India)

    Wintec

    on a series of 38 TIBO derivatives as HIV-1 reverse transcriptase (HIV-1 RT) inhibitors. Four different templates of the Cl-TIBO (1-REV) were created and used as reference templates for docking and align- ing. On the basis of the optimal conformation of the ligands, when fitting to the template, the respective scoring functions ...

  13. Modulation by phytochrome of the blue light-induced extracellular acidification by leaf epidermal cells of pea (Pisum sativum L.) : a kinetic analysis

    NARCIS (Netherlands)

    Elzenga, JTM; Staal, M; Prins, HBA

    Blue light induces extracellular acidification, a prerequisite of cell expansion, in epidermis cells of young pea leaves, by stimulation of the proton pumping-ATPase activity in the plasma membrane. A transient acidification, reaching a maximum 2.5-5 min after the start of the pulse, could be

  14. The evaluation of a novel method comparing quantitative light-induced fluorescence (QLF) with spectrophotometry to assess staining and bleaching of teeth

    NARCIS (Netherlands)

    Adeyemi, A.A.; Jarad, F.D.; de Josselin de Jong, E.; Pender, N.; Higham, S.M.

    2010-01-01

    This study reports the development and evaluation of a novel method using quantitative light-induced fluorescence (QLF), which enables its use for quantifying and assessing whole tooth surface staining and tooth whitening. The method was compared with a spectrophotometer to assess reliability. Two

  15. Light-induced changes within photosystem II protects Microcoleus sp. in biological desert sand crusts against excess light.

    Directory of Open Access Journals (Sweden)

    Itzhak Ohad

    Full Text Available The filamentous cyanobacterium Microcoleus vaginatus, a major primary producer in desert biological sand crusts, is exposed to frequent hydration (by early morning dew followed by desiccation during potentially damaging excess light conditions. Nevertheless, its photosynthetic machinery is hardly affected by high light, unlike "model" organisms whereby light-induced oxidative stress leads to photoinactivation of the oxygen-evolving photosystem II (PSII. Field experiments showed a dramatic decline in the fluorescence yield with rising light intensity in both drying and artificially maintained wet plots. Laboratory experiments showed that, contrary to "model" organisms, photosynthesis persists in Microcoleus sp. even at light intensities 2-3 times higher than required to saturate oxygen evolution. This is despite an extensive loss (85-90% of variable fluorescence and thermoluminescence, representing radiative PSII charge recombination that promotes the generation of damaging singlet oxygen. Light induced loss of variable fluorescence is not inhibited by the electron transfer inhibitors 3-(3,4-dichlorophenyl-1,1-dimethylurea (DCMU, 2,5-dibromo-3-methyl-6-isopropylbenzoquinone (DBMIB, nor the uncoupler carbonyl cyanide-p-trifluoromethoxyphenylhydrazone (FCCP, thus indicating that reduction of plastoquinone or O(2, or lumen acidification essential for non-photochemical quenching (NPQ are not involved. The rate of Q(A (- re-oxidation in the presence of DCMU is enhanced with time and intensity of illumination. The difference in temperatures required for maximal thermoluminescence emissions from S(2/Q(A (- (Q band, 22 degrees C and S(2,3/Q(B (- (B band, 25 degrees C charge recombinations is considerably smaller in Microcoleus as compared to "model" photosynthetic organisms, thus indicating a significant alteration of the S(2/Q(A (- redox potential. We propose that enhancement of non-radiative charge recombination with rising light intensity may reduce

  16. Effective surface passivation of p-type crystalline silicon with silicon oxides formed by light-induced anodisation

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Jie, E-mail: j.cui@unsw.edu.au [School of Photovoltaic and Renewable Energy Engineering, The University of New South Wales, Sydney 2052 (Australia); Grant, Nicholas [Centre for Sustainable Energy Systems, Australian National University, Canberra, A.C.T. 0200 (Australia); Lennon, Alison [School of Photovoltaic and Renewable Energy Engineering, The University of New South Wales, Sydney 2052 (Australia)

    2014-12-30

    Highlights: • The surface passivation by anodic SiO{sub 2} formed by light-induced anodisation is investigated. • The anodic SiO{sub 2} grows lower temperatures with shorter growth times. After annealing in oxygen and then forming gas the effective minority carrier lifetime is increased to 150 μs. • It shows a very low positive Q{sub eff} of 3.4 × 10{sup 11} cm{sup −2}, a moderate D{sub it} of 6 × 10{sup 11} eV{sup −1} cm{sup −2}. • It has a very low leakage current density suggesting its application in solar cell as a functional dielectric. - Abstract: Electronic surface passivation of p-type crystalline silicon by anodic silicon dioxide (SiO{sub 2}) was investigated. The anodic SiO{sub 2} was grown by light-induced anodisation (LIA) in diluted sulphuric acid at room temperature, a process that is significantly less-expensive than thermal oxidation which is widely-used in silicon solar cell fabrication. After annealing in oxygen and then forming gas at 400 °C for 30 min, the effective minority carrier lifetime of 3–5 Ω cm, boron-doped Czochralski silicon wafers with a phosphorus-doped 80 Ω/□ emitter and a LIA anodic SiO{sub 2} formed on the p-type surface was increased by two orders of magnitude to 150 μs. Capacitance–voltage measurements demonstrated a very low positive charge density of 3.4 × 10{sup 11} cm{sup −2} and a moderate density of interface states of 6 × 10{sup 11} eV{sup −1} cm{sup −2}. This corresponded to a silicon surface recombination velocity of 62 cm s{sup −1}, which is comparable with values reported for other anodic SiO{sub 2} films, which required higher temperatures and longer growth times, and significantly lower than oxides grown by chemical vapour deposition techniques. Additionally, a very low leakage current density of 3.5 × 10{sup −10} and 1.6 × 10{sup −9} A cm{sup −2} at 1 and −1 V, respectively, was measured for LIA SiO{sub 2} suggesting its potential application as insulation layer in

  17. The blue light-induced interaction of cryptochrome 1 with COP1 requires SPA proteins during Arabidopsis light signaling.

    Science.gov (United States)

    Holtkotte, Xu; Ponnu, Jathish; Ahmad, Margaret; Hoecker, Ute

    2017-10-01

    Plants constantly adjust their growth, development and metabolism to the ambient light environment. Blue light is sensed by the Arabidopsis photoreceptors CRY1 and CRY2 which subsequently initiate light signal transduction by repressing the COP1/SPA E3 ubiquitin ligase. While the interaction between cryptochromes and SPA is blue light-dependent, it was proposed that CRY1 interacts with COP1 constitutively, i.e. also in darkness. Here, our in vivo co-immunoprecipitation experiments suggest that CRY1 and CRY2 form a complex with COP1 only after seedlings were exposed to blue light. No association between COP1 and CRY1 or CRY2 was observed in dark-grown seedlings. Thus, our results suggest that cryptochromes bind the COP1/SPA complex after photoactivation by blue light. In a spa quadruple mutant that is devoid of all four SPA proteins, CRY1 and COP1 did not interact in vivo, neither in dark-grown nor in blue light-grown seedlings. Hence, SPA proteins are required for the high-affinity interaction between CRY1 and COP1 in blue light. Yeast three-hybrid experiments also show that SPA1 enhances the CRY1-COP1 interaction. The coiled-coil domain of SPA1 which is responsible for COP1-binding was necessary to mediate a CRY1-SPA1 interaction in vivo, implying that-in turn-COP1 may be necessary for a CRY1-SPA1 complex formation. Hence, SPA1 and COP1 may act cooperatively in recognizing and binding photoactivated CRY1. In contrast, the blue light-induced association between CRY2 and COP1 was not dependent on SPA proteins in vivo. Similarly, ΔCC-SPA1 interacted with CRY2, though with a much lower affinity than wild-type SPA1. In total, our results demonstrate that CRY1 and CRY2 strongly differ in their blue light-induced interaction with the COP1/SPA complex.

  18. Blue light induced A2E oxidation in rat eyes--experimental animal model of dry AMD.

    Science.gov (United States)

    Wielgus, A R; Collier, R J; Martin, E; Lih, F B; Tomer, K B; Chignell, C F; Roberts, J E

    2010-11-01

    Previous studies have shown that short-wavelength blue visible light induces retinal injury and may be a risk factor for age related macular degeneration. A2E is a blue light absorbing retinal chromophore that accumulates with age. Our previous in vitro studies have determined that, although A2E itself has a low phototoxic efficiency, the oxidation products of A2E that are formed in the presence of visible light can contribute to observed retinal pigment epithelial photodamage. The purpose of this study was to investigate the effects of blue light on retinal phototoxicity and its relationship to A2E, oxidized A2E and its isomers. Sprague-Dawley albino rats were dark adapted for 24 h. Control rats remained in the dark while experimental rats were exposed to blue light (λ = 450 nm, 3.1 mW cm(-2)) for 6 h. Isolated retinas were homogenized in Folch extraction mixture and then in chloroform. The dried extracts were reconstituted and divided for determination of organic soluble compound. Esters of fatty acids were determined with GC-MS, A2E and other chromophores using HPLC, and A2E oxidation products with LC-MS. Exposure of rat eyes to blue light did not significantly change the fatty acid composition of the retina. The A2E concentration (normalized to fatty acid content) in blue light exposed animals was found to be lower than the A2E concentration in control rats. The concentrations of all-trans-retinal-ethanolamine adduct and iso-A2E a precursor and an isomer of A2E respectively, were also lower after blue-light exposure than in the retinas of rats housed in the dark. On the other hand, the amount of oxidized forms of A2E was higher in the animals exposed to blue light. We conclude that in the rat eye, blue-light exposure promotes oxidation of A2E and iso-A2E to the products that are toxic to retinal tissue. Although high concentrations of A2E may be cytotoxic to the retina, the phototoxicity associated with blue light damage to the retina is in part a result of

  19. Template-Guided Self-Assembly of Discrete Optoplasmonic Molecules and Extended Optoplasmonic Arrays

    Directory of Open Access Journals (Sweden)

    Reinhard Björn M.

    2015-01-01

    Full Text Available The integration of metallic and dielectric building blocks into optoplasmonic structures creates new electromagnetic systems in which plasmonic and photonic modes can interact in the near-, intermediate- and farfield. The morphology-dependent electromagnetic coupling between the different building blocks in these hybrid structures provides a multitude of opportunities for controlling electromagnetic fields in both spatial and frequency domain as well as for engineering the phase landscape and the local density of optical states. Control over any of these properties requires, however, rational fabrication approaches for well-defined metal-dielectric hybrid structures. Template-guided self-assembly is a versatile fabrication method capable of integrating metallic and dielectric components into discrete optoplasmonic structures, arrays, or metasurfaces. The structural flexibility provided by the approach is illustrated by two representative implementations of optoplasmonic materials discussed in this review. In optoplasmonic atoms or molecules optical microcavities (OMs serve as whispering gallery mode resonators that provide a discrete photonic mode spectrum to interact with plasmonic nanostructures contained in the evanescent fields of the OMs. In extended hetero-nanoparticle arrays in-plane scattered light induces geometry-dependent photonic resonances that mix with the localized surface plasmon resonances of the metal nanoparticles.We characterize the fundamental electromagnetic working principles underlying both optoplasmonic approaches and review the fabrication strategies implemented to realize them.

  20. CPU and GPU (Cuda Template Matching Comparison

    Directory of Open Access Journals (Sweden)

    Evaldas Borcovas

    2014-05-01

    Full Text Available Image processing, computer vision or other complicated opticalinformation processing algorithms require large resources. It isoften desired to execute algorithms in real time. It is hard tofulfill such requirements with single CPU processor. NVidiaproposed CUDA technology enables programmer to use theGPU resources in the computer. Current research was madewith Intel Pentium Dual-Core T4500 2.3 GHz processor with4 GB RAM DDR3 (CPU I, NVidia GeForce GT320M CUDAcompliable graphics card (GPU I and Intel Core I5-2500K3.3 GHz processor with 4 GB RAM DDR3 (CPU II, NVidiaGeForce GTX 560 CUDA compatible graphic card (GPU II.Additional libraries as OpenCV 2.1 and OpenCV 2.4.0 CUDAcompliable were used for the testing. Main test were made withstandard function MatchTemplate from the OpenCV libraries.The algorithm uses a main image and a template. An influenceof these factors was tested. Main image and template have beenresized and the algorithm computing time and performancein Gtpix/s have been measured. According to the informationobtained from the research GPU computing using the hardwarementioned earlier is till 24 times faster when it is processing abig amount of information. When the images are small the performanceof CPU and GPU are not significantly different. Thechoice of the template size makes influence on calculating withCPU. Difference in the computing time between the GPUs canbe explained by the number of cores which they have.

  1. Deep Human Parsing with Active Template Regression.

    Science.gov (United States)

    Liang, Xiaodan; Liu, Si; Shen, Xiaohui; Yang, Jianchao; Liu, Luoqi; Dong, Jian; Lin, Liang; Yan, Shuicheng

    2015-12-01

    In this work, the human parsing task, namely decomposing a human image into semantic fashion/body regions, is formulated as an active template regression (ATR) problem, where the normalized mask of each fashion/body item is expressed as the linear combination of the learned mask templates, and then morphed to a more precise mask with the active shape parameters, including position, scale and visibility of each semantic region. The mask template coefficients and the active shape parameters together can generate the human parsing results, and are thus called the structure outputs for human parsing. The deep Convolutional Neural Network (CNN) is utilized to build the end-to-end relation between the input human image and the structure outputs for human parsing. More specifically, the structure outputs are predicted by two separate networks. The first CNN network is with max-pooling, and designed to predict the template coefficients for each label mask, while the second CNN network is without max-pooling to preserve sensitivity to label mask position and accurately predict the active shape parameters. For a new image, the structure outputs of the two networks are fused to generate the probability of each label for each pixel, and super-pixel smoothing is finally used to refine the human parsing result. Comprehensive evaluations on a large dataset well demonstrate the significant superiority of the ATR framework over other state-of-the-arts for human parsing. In particular, the F1-score reaches 64.38 percent by our ATR framework, significantly higher than 44.76 percent based on the state-of-the-art algorithm [28].

  2. Modulation of light-induced skin tumors by N-acetylcysteine and/or ascorbic acid in hairless mice.

    Science.gov (United States)

    D'Agostini, Francesco; Balansky, Roumen M; Camoirano, Anna; De Flora, Silvio

    2005-03-01

    The light emitted by halogen quartz bulbs contains a broad spectrum of UV wavelengths, is strongly genotoxic and is a potent inducer of skin tumors in hairless mice. By using a UVC filter, this light mimics solar radiation and induces a variety of genomic and transcriptional alterations in mouse skin. UV-related carcinogenesis involves depletion of antioxidants and glutathione in skin cells. On this basis, we evaluated modulation of carcinogenicity of UVC-filtered halogen lamps in SKH-1 hairless mice by the antioxidants N-acetyl-l-cysteine (NAC) and ascorbic acid (AsA). Both agents were given in the drinking water, either individually or in combination. The earliest skin lesions were detected after 300 days' exposure to light and became confluent in a number of mice after 480 days. NAC administration prolonged the latency time by 90 days. Moreover, NAC considerably and significantly decreased both incidence and multiplicity of light-induced skin tumors, prevented the occurrence of malignant lesions (squamocellular carcinomas) and reduced the tumor size. In contrast, AsA, which may behave as a prooxidant rather than an antioxidant, increased the multiplicity of total skin tumors, carcinomas in situ and squamocellular carcinomas. Co-administration of NAC with AsA significantly attenuated the negative effect of AsA, presumably due to the ability of this thiol to maintain a reduced environment. Therefore, in agreement with our previous in vitro findings, oral NAC is able to attenuate the detrimental effects of AsA.

  3. The Light-Induced Field-Effect Solar Cell Concept - Perovskite Nanoparticle Coating Introduces Polarization Enhancing Silicon Cell Efficiency.

    Science.gov (United States)

    Wang, Yusheng; Xia, Zhouhui; Liu, Lijia; Xu, Weidong; Yuan, Zhongcheng; Zhang, Yupeng; Sirringhaus, Henning; Lifshitz, Yeshayahu; Lee, Shui-Tong; Bao, Qiaoliang; Sun, Baoquan

    2017-05-01

    Solar cell generates electrical energy from light one via pulling excited carrier away under built-in asymmetry. Doped semiconductor with antireflection layer is general strategy to achieve this including crystalline silicon (c-Si) solar cell. However, loss of extra energy beyond band gap and light reflection in particular wavelength range is known to hinder the efficiency of c-Si cell. Here, it is found that part of short wavelength sunlight can be converted into polarization electrical field, which strengthens asymmetry in organic-c-Si heterojunction solar cell through molecule alignment process. The light harvested by organometal trihalide perovskite nanoparticles (NPs) induces molecular alignment on a conducting polymer, which generates positive electrical surface field. Furthermore, a "field-effect solar cell" is successfully developed and implemented by combining perovskite NPs with organic/c-Si heterojunction associating with light-induced molecule alignment, which achieves an efficiency of 14.3%. In comparison, the device with the analogous structure without perovskite NPs only exhibits an efficiency of 12.7%. This finding provides a novel concept to design solar cell by sacrificing part of sunlight to provide "extra" asymmetrical field continuously as to drive photogenerated carrier toward respective contacts under direct sunlight. Moreover, it also points out a method to combine promising perovskite material with c-Si solar cell. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. [Light-induced retinal damage in pigmented rabbits--1. Histopathological observations of the natural course of healing].

    Science.gov (United States)

    Kozaki, J; Takeuchi, M; Takahashi, K; Yamagishi, K; Ohkuma, H; Uyama, M

    1994-08-01

    Pigmented rabbits were exposed for 2 hours to xenon light to evaluate the light induced retinal damage clinicopathologically. The xenon light was passed through a heat filter to avoid the influence of long waves, and through the fundus contact lens on the cornea to avoid focusing the light on the retina. No abnormal findings were detected in the retina in fluorescein angiography immediately after the light exposure. Three hours later, hyperfluorescence was found in the center of the exposed area and gradually grew worse. This was most marked twelve hours later. After 6 days, granular hyperfluorescence appeared at the edge of the damaged area and in 2 weeks the whole damaged area showed granular hyperfluorescence. Histopathologically, immediately after the light exposure, slight changes appeared in the retinal pigment epithelium (RPE). Twelve hours later, the cytoplasm of the RPE was edematous, and in 24 hours the RPE became necrotic, but the outer segments of the photoreceptor cells appeared intact. After 6 days, the RPE showed double layering, many macrophages were found in the subretinal space, and the outer segments of the photoreceptor cells were severely damaged. The RPE was primarily damaged and photoreceptor cells were damaged subsequently by xenon light without long waves.

  5. Optical path-length spectroscopy of incipient caries lesions in relation to quantitative light-induced fluorescence and lesion characteristics.

    Science.gov (United States)

    Mujat, Claudia; van der Veen, Monique H; Ruben, Jan L; ten Bosch, Jaap J; Dogariu, Aristide

    2003-06-01

    A basic understanding of the light-scattering processes that take place inside the dental tissue (either sound or carious) is obtained both with measurements of the photon path-length distribution of light inside such media and with Monte Carlo simulations. Furthermore, the following is investigated: the correlations between different momenta of the photon path-length distribution of light inside caries lesions, the fluorescence loss determined with quantitative light-induced fluorescence, and/or the demineralization and depth of caries lesions determined with transversal microradiography. It is concluded that (i) the light paths inside both carious and sound enamel are considerably influenced by the refractive-index contrast at the tooth surface; (ii) contrary to a previous hypothesis, the fluorescence loss is larger in lesions in which the average photon path length is longer; (iii) very good correlations are obtained between the optical characteristics and the physical parameters of lesions when the optical measurements are performed such that there is high refractive contrast at the tooth surface.

  6. Light-induced electron transfer and charge transport in mesoporous ZnO/D149 hybrid films

    Energy Technology Data Exchange (ETDEWEB)

    Rudolph, Melanie; Schlettwein, Derck [Institute of Applied Physics, Justus-Liebig-University Giessen (Germany); Miura, Hidetoshi [Chemicrea Co., Ltd., 2-1-6 Sengen, Tsukuba, Ibaraki 305-0047 (Japan)

    2011-07-01

    Dye-sensitized solar cells (DSC) consist of a nanostructured semiconductor/dye hybrid layer as light absorbing and electron conducting phase, permeated by a liquid phase ensuring transfer of positive charges to a counter electrode. In this study, nanostructured ZnO was electrodeposited on fluorine-doped tin oxide (FTO) and loaded with the fully organic dye D149. The ZnO/D149 electrodes were analyzed in contact with a liquid iodide/triiodide electrolyte. Steady-state photocurrent and photovoltage measurements were performed to derive basic photovoltaic parameters like short-circuit photocurrent, open-circuit photovoltage and external quantum efficiency (IPCE). Open-circuit photovoltage decay measurements (OCVD) as well as intensity-modulated photovoltage spectroscopy (IMVS) were utilized to obtain information about the extent and mechanisms of recombination, i.e. unwanted back transfer of electrons from ZnO to D149 or to the liquid contact phase. Intensity-modulated photocurrent spectroscopy (IMPS) served to gain an insight into electron transport within the porous zinc oxide films. The interplay between light-induced charge transfer from D149 to ZnO, electron transport within the porous ZnO matrix and recombination of photoinjected electrons is discussed.

  7. Efficacy of Four Remineralizing Agents on Primary Teeth: In Vitro Evaluation Using Microhardness Testing and Quantitative Light-induced Fluorescence.

    Science.gov (United States)

    Krishnan, Gayathri; George, Sageena; Anandaraj, S; John, Sheen Ann; Mathew, V; Shanavas, Nikil M

    2017-05-15

    This study's purpose was to evaluate the remineralization of primary enamel using GC Tooth Mousse, Clinpro Tooth Crème, SHY-NM, and Pronamel by employing microhardness testing and quantitative light-induced fluorescence (QLF) values. An in vitro study was performed with 100 intact primary anterior teeth. After specimen preparation, they were subjected to baseline microhardness and QLF testing. The specimens were immersed in demineralizing solution, subjected again to microhardness and QLF testing, and divided randomly into five groups of 20 teeth: group one-control group (artificial saliva); group two-GC Tooth Mousse; group three-ClinPro tooth crème; group four-SHY-NM; and group five-Pronamel. The pastes were respectively applied for the specific group specimens for 15 consecutive days. The samples were subjected to microhardness and QLF testing. The results were analyzed using analysis of variance testing. A post-hoc comparison was done using a paired t test. There were mean increases in microhardness and QLF values with all remineralizing agents. Group two showed a statistically significant increase (Pmicrohardness and QLF values. Group four showed a significant increase only in microhardness values. (Pmaterials for remineralizing incipient lesions in primary teeth.

  8. Determination of blue-light-induced infrared absorption based on mode-matching efficiency in an optical parametric oscillator

    Science.gov (United States)

    Wang, Yajun; Yang, Wenhai; Li, Zhixiu; Zheng, Yaohui

    2017-02-01

    Non-classical squeezed states of light at a compatible atomic wavelength have a potential application in quantum information protocols for quantum states delaying or storaging. An optical parametric oscillator (OPO) with periodically poled potassium titanyl phosphate (PPKTP) is the most effective method for generating this squeezed state. However, it is a challege for the nonlinear interaction in PPKTP crystal at the D1 line of rubidium atomic, due to a strong blue-light-induced infrared absorption (BLIIRA). In this paper, we report an indirect measurement method for the BLIIRA through measuring the mode-matching efficiency in an optical parametric oscillator. In contrast to previous works, our method is not limited by the absolute power variation induced from the change of frequency conversion loss and the impedance matching originated from the change of absorption loss. Therefore, the measurement process is performed at the phase-matching condition. The measured results show that BLIIRA coefficient is quadratic dependence of blue light intensity below 1 kW per square centimeter in our PPKTP device, which will provide important basis for optimizing squeezed state generation at 795 nm.

  9. Reduction of light-induced anthocyanin accumulation in inoculated sorghum mesocotyls. Implications for a compensatory role in the defense response.

    Science.gov (United States)

    Lo, S C; Nicholson, R L

    1998-03-01

    Sorghum (Sorghum bicolor L. Moench) accumulates the anthocyanin cyanidin 3-dimalonyl glucoside in etiolated mesocotyls in response to light. Inoculation with the nonpathogenic fungus Cochliobolus heterostrophus drastically reduced the light-induced accumulation of anthocyanin by repressing the transcription of the anthocyanin biosynthesis genes encoding flavanone 3-hydroxylase, dihydroflavonol 4-reductase, and anthocyanidin synthase. In contrast to these repression effects, fungal inoculation resulted in the synthesis of the four known 3-deoxyanthocyanidin phytoalexins and a corresponding activation of genes encoding the key branch-point enzymes in the phenylpropanoid pathway, phenylalanine ammonia-lyase and chalcone synthase. In addition, a gene encoding the pathogenesis-related protein PR-10 was strongly induced in response to inoculation. The accumulation of phytoalexins leveled off by 48 h after inoculation and was accompanied by a more rapid increase in the rate of anthocyanin accumulation. The results suggest that the plant represses less essential metabolic activities such as anthocyanin synthesis as a means of compensating for the immediate biochemical and physiological needs for the defense response.

  10. Modeling light-induced charge transfer dynamics across a metal-molecule-metal junction: bridging classical electrodynamics and quantum dynamics.

    Science.gov (United States)

    Hu, Zixuan; Ratner, Mark A; Seideman, Tamar

    2014-12-14

    We develop a numerical approach for simulating light-induced charge transport dynamics across a metal-molecule-metal conductance junction. The finite-difference time-domain method is used to simulate the plasmonic response of the metal structures. The Huygens subgridding technique, as adapted to Lorentz media, is used to bridge the vastly disparate length scales of the plasmonic metal electrodes and the molecular system, maintaining accuracy. The charge and current densities calculated with classical electrodynamics are transformed to an electronic wavefunction, which is then propagated through the molecular linker via the Heisenberg equations of motion. We focus mainly on development of the theory and exemplify our approach by a numerical illustration of a simple system consisting of two silver cylinders bridged by a three-site molecular linker. The electronic subsystem exhibits fascinating light driven dynamics, wherein the charge density oscillates at the driving optical frequency, exhibiting also the natural system timescales, and a resonance phenomenon leads to strong conductance enhancement.

  11. Protective effect of light emitting diode phototherapy on fluorescent light induced retinal damage in Wistar strain albino rats.

    Science.gov (United States)

    Ahamed Basha, A; Mathangi, D C; Shyamala, R; Ramesh Rao, K

    2014-09-01

    Artificial light at night alters retinal physiology. Several studies have shown that light emitting diode phototherapy protects the retina from the damaging effects of acute light exposure. The aim of this study has been to elucidate the protective effects of 670 nm LED light on retinal damage induced by chronic fluorescent light in Wistar rats. Male Wistar albino rats were divided into four groups: group 1 were control (CL), group 2, 3 and 4 were exposed to fluorescent light (FL), LED preexposure+fluorescent light exposure (LL) and only LED light exposure (OL) respectively. All animals were maintained in their specific exposure regime for 30 days. Fluorescent light of 1800 lx was exposed between 8 pm to 8 am. Rats were exposed to therapeutic LED light of 670 nm of 9 J/cm2 at 25 mW/cm2 for 6 min duration. Histopathological changes in the retina were studied. Animals of the FL group showed a significant reduction in the outer nuclear layer thickness and cell count in addition to the total thickness of the retina. LL group which were exposed to 670 nm LED prior to exposure to fluorescent light showed a significant decrease in the degree of damage. 670 nm LED light preexposure is protective to retinal cells against fluorescent light-induced damage. Copyright © 2014 Elsevier GmbH. All rights reserved.

  12. Light-induced EPR study of charge transfer in P3HT/bis-PCBM bulk heterojunctions

    Directory of Open Access Journals (Sweden)

    Victor I. Krinichnyi

    2011-06-01

    Full Text Available Radical pairs, polarons and fullerene anion radicals photoinduced by photons with energy of 1.98 – 2.73 eV in bulk heterojunctions formed by poly(3-hexylthiophene (P3HT with bis(1-[3-(methoxycarbonylpropyl]-1-phenyl-[6.6]C62 (bis-PCBM fullerene derivative have been studied by direct light-induced EPR (LEPR method in a wide temperature range. A part of photoinduced polarons are pinned in trap sites which number and depth are governed by an ordering of the polymer/fullerene system and energy of initiating photons. It was shown that dynamics and recombination of mobile polarons and counter fullerene anion radicals are governed by their exchange- and multi-trap assisted diffusion. Relaxation and dynamics parameters of both the charge carriers were determined separately by the steady-state saturation method. These parameters are governed by structure and conformation of the carriers’ microenvironment as well as by the energy of irradiating photons. Longitudinal diffusion of polarons was shown to depend on lattice phonons of crystalline domains embedded into an amorphous polymer matrix. The energy barrier required for polaron interchain hopping is higher than that its intrachain diffusion. Pseudorotation of fullerene derivatives in a polymer matrix was shown to follow the activation Pike model.

  13. Computer Vision-Based Structural Displacement Measurement Robust to Light-Induced Image Degradation for In-Service Bridges.

    Science.gov (United States)

    Lee, Junhwa; Lee, Kyoung-Chan; Cho, Soojin; Sim, Sung-Han

    2017-10-11

    The displacement responses of a civil engineering structure can provide important information regarding structural behaviors that help in assessing safety and serviceability. A displacement measurement using conventional devices, such as the linear variable differential transformer (LVDT), is challenging owing to issues related to inconvenient sensor installation that often requires additional temporary structures. A promising alternative is offered by computer vision, which typically provides a low-cost and non-contact displacement measurement that converts the movement of an object, mostly an attached marker, in the captured images into structural displacement. However, there is limited research on addressing light-induced measurement error caused by the inevitable sunlight in field-testing conditions. This study presents a computer vision-based displacement measurement approach tailored to a field-testing environment with enhanced robustness to strong sunlight. An image-processing algorithm with an adaptive region-of-interest (ROI) is proposed to reliably determine a marker's location even when the marker is indistinct due to unfavorable light. The performance of the proposed system is experimentally validated in both laboratory-scale and field experiments.

  14. White-Light-Induced Collective Heating of Gold Nanocomposite/Bombyx mori Silk Thin Films with Ultrahigh Broadband Absorbance.

    Science.gov (United States)

    Tsao, Shao Hsuan; Wan, Dehui; Lai, Yu-Sheng; Chang, Ho-Ming; Yu, Chen-Chieh; Lin, Keng-Te; Chen, Hsuen-Li

    2015-12-22

    This paper describes a systematic investigation of the phenomenon of white-light-induced heating in silk fibroin films embedded with gold nanoparticles (Au NPs). The Au NPs functioned to develop an ultrahigh broadband absorber, allowing white light to be used as a source for photothermal generation. With an increase of the Au content in the composite films, the absorbance was enhanced significantly around the localized surface plasmon resonance (LSPR) wavelength, while non-LSPR wavelengths were also increased dramatically. The greater amount of absorbed light increased the rate of photoheating. The optimized composite film exhibited ultrahigh absorbances of approximately 95% over the spectral range from 350 to 750 nm, with moderate absorbances (>60%) at longer wavelengths (750-1000 nm). As a result, the composite film absorbed almost all of the incident light and, accordingly, converted this optical energy to local heat. Therefore, significant temperature increases (ca. 100 °C) were readily obtained when we irradiated the composite film under a light-emitting diode or halogen lamp. Moreover, such composite films displayed linear light-to-heat responses with respect to the light intensity, as well as great photothermal stability. A broadband absorptive film coated on a simple Al/Si Schottky diode displayed a linear, significant, stable photo-thermo-electronic effect in response to varying the light intensity.

  15. An ancestral haplotype of the human PERIOD2 gene associates with reduced sensitivity to light-induced melatonin suppression.

    Science.gov (United States)

    Akiyama, Tokiho; Katsumura, Takafumi; Nakagome, Shigeki; Lee, Sang-Il; Joh, Keiichiro; Soejima, Hidenobu; Fujimoto, Kazuma; Kimura, Ryosuke; Ishida, Hajime; Hanihara, Tsunehiko; Yasukouchi, Akira; Satta, Yoko; Higuchi, Shigekazu; Oota, Hiroki

    2017-01-01

    Humans show various responses to the environmental stimulus in individual levels as "physiological variations." However, it has been unclear if these are caused by genetic variations. In this study, we examined the association between the physiological variation of response to light-stimulus and genetic polymorphisms. We collected physiological data from 43 subjects, including light-induced melatonin suppression, and performed haplotype analyses on the clock genes, PER2 and PER3, exhibiting geographical differentiation of allele frequencies. Among the haplotypes of PER3, no significant difference in light sensitivity was found. However, three common haplotypes of PER2 accounted for more than 96% of the chromosomes in subjects, and 1 of those 3 had a significantly low-sensitive response to light-stimulus (P haplotype showed significantly lower percentages of melatonin suppression (P haplotypes varied their ratios, indicating that the physiological variation for light-sensitivity is evidently related to the PER2 polymorphism. Compared with global haplotype frequencies, the haplotype with a low-sensitive response was more frequent in Africans than in non-Africans, and came to the root in the phylogenetic tree, suggesting that the low light-sensitive haplotype is the ancestral type, whereas the other haplotypes with high sensitivity to light are the derived types. Hence, we speculate that the high light-sensitive haplotypes have spread throughout the world after the Out-of-Africa migration of modern humans.

  16. Non-rigid contour-to-pixel registration of photographic and quantitative light-induced fluorescence imaging of decalcified teeth

    Science.gov (United States)

    Berkels, Benjamin; Deserno, Thomas; Ehrlich, Eva E.; Fritz, Ulrike B.; Sirazitdinova, Ekaterina; Tatano, Rosalia

    2016-03-01

    Quantitative light-induced fluorescence (QLF) is widely used to assess the damage of a tooth due to decalcification. In digital photographs, decalcification appears as white spot lesions, i.e. white spots on the tooth surface. We propose a novel multimodal registration approach for the matching of digital photographs and QLF images of decalcified teeth. The registration is based on the idea of contour-to-pixel matching. Here, the curve, which represents the shape of the tooth, is extracted from the QLF image using a contour segmentation by binarization and morphological processing. This curve is aligned to the photo with a non-rigid variational registration approach. Thus, the registration problem is formulated as minimization problem with an objective function that consists of a data term and a regularizer for the deformation. To construct the data term, the photo is pointwise classified into tooth and non-tooth regions. Then, the signed distance function of the tooth region allows to measure the mismatch between curve and photo. As regularizer a higher order, linear elastic prior is used. The resulting minimization problem is solved numerically using bilinear Finite Elements for the spatial discretization and the Gauss-Newton algorithm. The evaluation is based on 150 image pairs, where an average of 5 teeth have been captured from 32 subjects. All registrations have been confirmed correctly by a dental expert. The contour-to-pixel methods can directly be used in 3D for surface-to-voxel tasks.

  17. Detection of proximal caries using quantitative light-induced fluorescence-digital and laser fluorescence: a comparative study.

    Science.gov (United States)

    Yoon, Hyung-In; Yoo, Min-Jeong; Park, Eun-Jin

    2017-12-01

    The purpose of this study was to evaluate the in vitro validity of quantitative light-induced fluorescence-digital (QLF-D) and laser fluorescence (DIAGNOdent) for assessing proximal caries in extracted premolars, using digital radiography as reference method. A total of 102 extracted premolars with similar lengths and shapes were used. A single operator conducted all the examinations using three different detection methods (bitewing radiography, QLF-D, and DIAGNOdent). The bitewing x-ray scale, QLF-D fluorescence loss (ΔF), and DIAGNOdent peak readings were compared and statistically analyzed. Each method showed an excellent reliability. The correlation coefficient between bitewing radiography and QLF-D, DIAGNOdent were -0.644 and 0.448, respectively, while the value between QLF-D and DIAGNOdent was -0.382. The kappa statistics for bitewing radiography and QLF-D had a higher diagnosis consensus than those for bitewing radiography and DIAGNOdent. The QLF-D was moderately to highly accurate (AUC = 0.753 - 0.908), while DIAGNOdent was moderately to less accurate (AUC = 0.622 - 0.784). All detection methods showed statistically significant correlation and high correlation between the bitewing radiography and QLF-D. QLF-D was found to be a valid and reliable alternative diagnostic method to digital bitewing radiography for in vitro detection of proximal caries.

  18. Mitochondria-derived reactive oxygen species mediate blue light-induced death of retinal pigment epithelial cells.

    Science.gov (United States)

    King, Ayala; Gottlieb, Eyal; Brooks, David G; Murphy, Michael P; Dunaief, Joshua L

    2004-05-01

    Throughout the lifetime of an individual, light is focused onto the retina. The resulting photooxidative stress can cause acute or chronic retinal damage. The pathogenesis of age-related macular degeneration (AMD), the leading cause of legal blindness in the developed world, involves oxidative stress and death of the retinal pigment epithelium (RPE) followed by death of the overlying photoreceptors. Evidence suggests that damage due to exposure to light plays a role in AMD and other age-related eye diseases. In this work a system for light-induced damage and death of the RPE, based on the human ARPE-19 cell line, was used. Induction of mitochondria-derived reactive oxygen species (ROS) is shown to play a critical role in the death of cells exposed to short-wavelength blue light (425 +/- 20 nm). ROS and cell death are blocked either by inhibiting the mitochondrial electron transport chain or by mitochondria-specific antioxidants. These results show that mitochondria are an important source of toxic oxygen radicals in blue light-exposed RPE cells and may indicate new approaches for treating AMD using mitochondria-targeted antioxidants.

  19. A Neonatal Bimodal MR-CT Head Template.

    Directory of Open Access Journals (Sweden)

    Sona Ghadimi

    Full Text Available Neonatal MR templates are appropriate for brain structural analysis and spatial normalization. However, they do not provide the essential accurate details of cranial bones and fontanels-sutures. Distinctly, CT images provide the best contrast for bone definition and fontanels-sutures. In this paper, we present, for the first time, an approach to create a fully registered bimodal MR-CT head template for neonates with a gestational age of 39 to 42 weeks. Such a template is essential for structural and functional brain studies, which require precise geometry of the head including cranial bones and fontanels-sutures. Due to the special characteristics of the problem (which requires inter-subject inter-modality registration, a two-step intensity-based registration method is proposed to globally and locally align CT images with an available MR template. By applying groupwise registration, the new neonatal CT template is then created in full alignment with the MR template to build a bimodal MR-CT template. The mutual information value between the CT and the MR template is 1.17 which shows their perfect correspondence in the bimodal template. Moreover, the average mutual information value between normalized images and the CT template proposed in this study is 1.24±0.07. Comparing this value with the one reported in a previously published approach (0.63±0.07 demonstrates the better generalization properties of the new created template and the superiority of the proposed method for the creation of CT template in the standard space provided by MR neonatal head template. The neonatal bimodal MR-CT head template is freely downloadable from https://www.u-picardie.fr/labo/GRAMFC.

  20. Time course of neurotrophic factor upregulation and retinal protection against light-induced damage after optic nerve section.

    Science.gov (United States)

    Valter, Krisztina; Bisti, Silvia; Gargini, Claudia; Di Loreto, Silvia; Maccarone, Rita; Cervetto, Luigi; Stone, Jonathan

    2005-05-01

    To assess neurotrophic factor upregulation in the retina after damage to the optic nerve and relate that regulation to changes in photoreceptor stability and function. Retinas of adult pigmented (Long-Evans) rats were examined at successive times (1-60 days) after unilateral optic nerve section. The distribution and expression of ciliary neurotrophic factor (CNTF) and basic fibroblast growth factor (FGF-2) and their receptor elements FGFR1 and CNTFRalpha were studied with immunohistochemistry and Western blot analysis. FGF-2 and CNTF mRNA levels were also assessed, with semiquantitative reverse transcription-PCR. Levels and localization of the intracellular signaling molecule ERK and its activated, phosphorylated form pERK, were examined by immunohistochemistry. To assess the correlation between neurotrophic factor levels and their protective effect against light damage, albino (Sprague-Dawley) rats were exposed to bright continuous light (1000 lux) for 24 or 48 hours at successive times after nerve section. The TUNEL technique was used to visualize neuronal cell death in the retina. CNTF upregulation was detected 1 week after optic nerve section, peaked at 2 weeks, and fell to control levels at 4 weeks. CNTF appeared first in the inner retina in the ganglion cells, then in the Muller cells in which it became prominent at the outer limiting membrane (OLM) and in the outer segment (OS) region of photoreceptors. FGF-2 upregulation became prominent, particularly in photoreceptors, 21 to 28 days after surgery, continued to 2 months, and slowly declined thereafter. Double labeling with antibodies to ligand and the receptor showed colocalization of CNTF to its receptor at the OS region, whereas FGF-2-to-FGFR1 binding was found in the outer nuclear (ONL) and outer plexiform (OPL) layers. Optic nerve section provided a significant protective effect against light-induced damage in the first 2 weeks. There was no protection when animals were exposed to damaging light 1 month

  1. In vitro Validation of Quantitative Light-Induced Fluorescence for the Diagnosis of Enamel Fluorosis in Permanent Teeth.

    Science.gov (United States)

    Cuevas-Espinosa, D M; Martinez-Mier, E A; Ando, M; Castiblanco, G A; Cortes, F; Rincon-Bermudez, C M; Martignon, S

    2017-10-03

    This study aimed to validate quantitative light-induced fluorescence (QLF) as a diagnostic tool for mild and moderate enamel fluorosis in permanent teeth, comparing it to visual diagnosis and histological assessment completed using polarized light microscopy (PLM). The buccal surfaces of 139 teeth were visually classified using the Thylstrup and Fejerskov Index (TFI) into sound (TFI 0; n = 17), mild (TFI 1-2; n = 69), and moderate (TFI 3-4; n = 43) fluorosis. Fluorosis was then assessed with QLF (variables ΔF, A, and ΔQ at 5-, 15-, and 30-radiance thresholds) using as reference areas the entire surface and a region of interest (ROI), identified as the most representative region of a fluorosis lesion. PLM images of longitudinal thin sections including the ROI were assessed for histological changes. Correlations among TFI, PLM, and QLF were determined. A receiver-operating characteristic curve was conducted to determine QLF's diagnostic accuracy when compared to the TFI and PLM assessments. This was used to assess the probability that the images were correctly ranked according to severity as determined by PLM and TFI. A positive correlation was found between QLF and PLM, and between QLF and TFI. QLF showed the highest sensitivity and specificity for the diagnosis of mild fluorosis. There was also a strong agreement between TFI and PLM. The selection of a ROI resulted in a stronger correlation with TFI and PLM than when the entire surface was used. The study results indicate that defining an ROI for QLF assessments is a valid method for the diagnosis of mild and moderate enamel fluorosis. © 2017 S. Karger AG, Basel.

  2. Transcriptome analysis of the exocarp of apple fruit identifies light-induced genes involved in red color pigmentation.

    Science.gov (United States)

    Vimolmangkang, Sornkanok; Zheng, Danman; Han, Yuepeng; Khan, M Awais; Soria-Guerra, Ruth Elena; Korban, Schuyler S

    2014-01-15

    Although the mechanism of light regulation of color pigmentation of apple fruit is not fully understood, it has been shown that light can regulate expression of genes in the anthocyanin biosynthesis pathway by inducing transcription factors (TFs). Moreover, expression of genes encoding enzymes involved in this pathway may be coordinately regulated by multiple TFs. In this study, fruits on trees of apple cv. Red Delicious were covered with paper bags during early stages of fruit development and then removed prior to maturation to analyze the transcriptome in the exocarp of apple fruit. Comparisons of gene expression profiles of fruit covered with paper bags (dark-grown treatment) and those subjected to 14 h light treatment, following removal of paper bags, were investigated using an apple microarray of 40,000 sequences. Expression profiles were investigated over three time points, at one week intervals, during fruit development. Overall, 736 genes with expression values greater than two-fold were found to be modulated by light treatment. Light-induced products were classified into 19 categories with highest scores in primary metabolism (17%) and transcription (12%). Based on the Arabidopsis gene ontology annotation, 18 genes were identified as TFs. To further confirm expression patterns of flavonoid-related genes, these were subjected to quantitative RT-PCR (qRT-PCR) using fruit of red-skinned apple cv. Red Delicious and yellow-skinned apple cv. Golden Delicious. Of these, two genes showed higher levels of expression in 'Red Delicious' than in 'Golden Delicious', and were likely involved in the regulation of fruit red color pigmentation. © 2013 Elsevier B.V. All rights reserved.

  3. An ancestral haplotype of the human PERIOD2 gene associates with reduced sensitivity to light-induced melatonin suppression.

    Directory of Open Access Journals (Sweden)

    Tokiho Akiyama

    Full Text Available Humans show various responses to the environmental stimulus in individual levels as "physiological variations." However, it has been unclear if these are caused by genetic variations. In this study, we examined the association between the physiological variation of response to light-stimulus and genetic polymorphisms. We collected physiological data from 43 subjects, including light-induced melatonin suppression, and performed haplotype analyses on the clock genes, PER2 and PER3, exhibiting geographical differentiation of allele frequencies. Among the haplotypes of PER3, no significant difference in light sensitivity was found. However, three common haplotypes of PER2 accounted for more than 96% of the chromosomes in subjects, and 1 of those 3 had a significantly low-sensitive response to light-stimulus (P < 0.05. The homozygote of the low-sensitive PER2 haplotype showed significantly lower percentages of melatonin suppression (P < 0.05, and the heterozygotes of the haplotypes varied their ratios, indicating that the physiological variation for light-sensitivity is evidently related to the PER2 polymorphism. Compared with global haplotype frequencies, the haplotype with a low-sensitive response was more frequent in Africans than in non-Africans, and came to the root in the phylogenetic tree, suggesting that the low light-sensitive haplotype is the ancestral type, whereas the other haplotypes with high sensitivity to light are the derived types. Hence, we speculate that the high light-sensitive haplotypes have spread throughout the world after the Out-of-Africa migration of modern humans.

  4. Light induces phosphorylation of glucan water dikinase, which precedes starch degradation in turions of the duckweed Spirodela polyrhiza.

    Science.gov (United States)

    Reimann, Rezarta; Hippler, Michael; Machelett, Bernd; Appenroth, Klaus-J

    2004-05-01

    Degradation of storage starch in turions, survival organs of Spirodela polyrhiza, is induced by light. Starch granules isolated from irradiated (24 h red light) or dark-stored turions were used as an in vitro test system to study initial events of starch degradation. The starch-associated pool of glucan water dikinase (GWD) was investigated by two-dimensional gel electrophoresis and by western blotting using antibodies raised against GWD. Application of this technique allowed us to detect spots of GWD, which are light induced and absent on immunoblots prepared from dark-adapted plants. These spots, showing increased signal intensity following incubation of the starch granules with ATP, became labeled by randomized [betagamma-33P]ATP but not by [gamma-33P]ATP and were removed by acid phosphatase treatment. This strongly suggests that they represent a phosphorylated form(s) of GWD. The same light signal that induces starch degradation was thus demonstrated for the first time to induce autophosphorylation of starch-associated GWD. The in vitro assay system has been used to study further effects of the light signal that induces autophosphorylation of GWD and starch degradation. In comparison with starch granules from dark-adapted plants, those from irradiated plants showed increase in (1) binding capacity of GWD by ATP treatment decreased after phosphatase treatment; (2) incorporation of the beta-phosphate group of ATP into starch granules; and (3) rate of degradation of isolated granules by starch-associated proteins, further enhanced by phosphorylation of starch. The presented results provide evidence that autophosphorylation of GWD precedes the initiation of starch degradation under physiological conditions.

  5. Light Induces Phosphorylation of Glucan Water Dikinase, Which Precedes Starch Degradation in Turions of the Duckweed Spirodela polyrhiza12

    Science.gov (United States)

    Reimann, Rezarta; Hippler, Michael; Machelett, Bernd; Appenroth, Klaus-J.

    2004-01-01

    Degradation of storage starch in turions, survival organs of Spirodela polyrhiza, is induced by light. Starch granules isolated from irradiated (24 h red light) or dark-stored turions were used as an in vitro test system to study initial events of starch degradation. The starch-associated pool of glucan water dikinase (GWD) was investigated by two-dimensional gel electrophoresis and by western blotting using antibodies raised against GWD. Application of this technique allowed us to detect spots of GWD, which are light induced and absent on immunoblots prepared from dark-adapted plants. These spots, showing increased signal intensity following incubation of the starch granules with ATP, became labeled by randomized [βγ-33P]ATP but not by [γ-33P]ATP and were removed by acid phosphatase treatment. This strongly suggests that they represent a phosphorylated form(s) of GWD. The same light signal that induces starch degradation was thus demonstrated for the first time to induce autophosphorylation of starch-associated GWD. The in vitro assay system has been used to study further effects of the light signal that induces autophosphorylation of GWD and starch degradation. In comparison with starch granules from dark-adapted plants, those from irradiated plants showed increase in (1) binding capacity of GWD by ATP treatment decreased after phosphatase treatment; (2) incorporation of the β-phosphate group of ATP into starch granules; and (3) rate of degradation of isolated granules by starch-associated proteins, further enhanced by phosphorylation of starch. The presented results provide evidence that autophosphorylation of GWD precedes the initiation of starch degradation under physiological conditions. PMID:15122031

  6. Assessment of dental plaque coverage by Quantitative Light-induced Fluorescence (QLF) in domestic short-haired cats.

    Science.gov (United States)

    Marshall-Jones, Zoe V; Wallis, Corrin V; Allsopp, Judi M; Colyer, Alison; Davis, Ian J; Holcombe, Lucy J

    2017-04-01

    Dietary means of reducing plaque and calculus deposits are frequently sought for the maintenance of oral health in cats and dogs. In the development of such products sensitive, reliable, reproducible methods of measuring plaque and calculus are key. The aim of this study was to assess Quantitative Light-induced Fluorescence (QLF™) for the detection of dental plaque coverage in cats compared to the modified Logan and Boyce technique. The techniques were utilised in a crossover study, which compared two diets for their effect on plaque deposition in a cohort of 24 adult cats. Analysis of the effect of diet on plaque coverage by both the modified Logan and Boyce technique and QLF showed a significant effect of feeding regime (p=0.024 and p≤0.0001, respectively) with good agreement between the techniques in the percentage reduction of plaque accumulation. A within study assessment of QLF demonstrated excellent intra-operator repeatability (coefficient of variation 2.2%). Similarly, inter-operator reproducibility was also good (coefficient of variation 2.3%). A retrospective analysis, using the data to estimate the sample size required for at least 90% power to detect a 15% difference between treatments in a two-way crossover study, established that 10 cats would be sufficient for plaque measurement by QLF, while assessment by the modified Logan and Boyce method required over 30 cats. QLF was determined to be a reliable, reproducible method for the assessment of plaque deposition in cats and requires fewer subjects for the detection of differences between treatment effects compared to the modified Logan and Boyce method. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  7. An in vitro comparison of quantitative light-induced fluorescence-digital and spectrophotometer on monitoring artificial white spot lesions.

    Science.gov (United States)

    Kim, Hee Eun; Kim, Baek-Il

    2015-09-01

    The aim of this study was to evaluate the efficacy of quantitative light-induced fluorescence-digital (QLF-D) compared to a spectrophotometer in monitoring progression of enamel lesions. To generate artificial caries with various severities of lesion depths, twenty bovine specimens were immersed in demineralizing solution for 40 days. During the production of the lesions, repeat measurements of fluorescence loss (ΔF) and color change (ΔE) were performed in six distinct stages after the demineralization of the specimens: after 3, 5, 10, 20, 30, and 40 days of exposure to the demineralizing solution. Changes in the ΔF values in the lesions were analyzed using the QLF-D, and changes in the ΔE values in lesions were analyzed using a spectrophotometer. The repeated measures ANOVA of ΔF and ΔE values were used to determine whether there are significant differences at different exposure times in the demineralizing solution. Spearman's rank correlation coefficient was analyzed between ΔF and ΔE. The ΔF values significantly decreased based on the demineralizing period (p<0.001). Relatively large changes in ΔF values were observed during the first 10 days. There were significant changes in L(*), a(*), b(*), and ΔE values in lesions with increasing demineralizing duration (p<0.001). A strong correlation was observed between ΔF and ΔE with p=-0.853 (p<0.001). The results support the efficacy of QLF-D in monitoring color changes. Our findings demonstrate that QLF-D are a more efficient and stable tool for early caries detection. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Effects of day-time exposure to different light intensities on light-induced melatonin suppression at night.

    Science.gov (United States)

    Kozaki, Tomoaki; Kubokawa, Ayaka; Taketomi, Ryunosuke; Hatae, Keisuke

    2015-07-04

    Bright nocturnal light has been known to suppress melatonin secretion. However, bright light exposure during the day-time might reduce light-induced melatonin suppression (LIMS) at night. The effective proportion of day-time light to night-time light is unclear; however, only a few studies on accurately controlling both day- and night-time conditions have been conducted. This study aims to evaluate the effect of different day-time light intensities on LIMS. Twelve male subjects between the ages of 19 and 23 years (mean ± S.D., 20.8 ± 1.1) gave informed consent to participate in this study. They were exposed to various light conditions (light conditions). They were then exposed to bright light (300 lx) again between 01:00 and 02:30 (night-time light exposure). They provided saliva samples before (00:55) and after night-time light exposure (02:30). A one-tailed paired t test yielded significant decrements of melatonin concentration after night-time light exposure under day-time dim, 100- and 300-lx light conditions. No significant differences exist in melatonin concentration between pre- and post-night-time light exposure under day-time 900- and 2700-lx light conditions. Present findings suggest the amount of light exposure needed to prevent LIMS caused by ordinary nocturnal light in individuals who have a general life rhythm (sleep/wake schedule). These findings may be useful in implementing artificial light environments for humans in, for example, hospitals and underground shopping malls.

  9. Validation of quantitative light-induced fluorescence-digital (QLF-D) for the detection of approximal caries in vitro.

    Science.gov (United States)

    Ko, Hae-Youn; Kang, Si-Mook; Kim, Hee Eun; Kwon, Ho-Keun; Kim, Baek-Il

    2015-05-01

    Detection of approximal caries lesions can be difficult due to their anatomical position. This study aimed to assess the ability of the quantitative light-induced fluorescence-digital (QLF-D) in detecting approximal caries, and to compare the performance with those of the International Caries Detection and Assessment System II (ICDAS II) and digital radiography (DR). Extracted permanent teeth (n=100) were selected and mounted in pairs. The simulation pairs were assessed by one calibrated dentist using each detection method. After all the examinations, the teeth (n=95) were sectioned and examined histologically as gold standard. The modalities were compared in terms of sensitivity, specificity, areas under receiver operating characteristic curves (AUROC) for enamel (D1) and dentine (D3) levels. The intra-examiner reliability was assessed for all modalities. At D1 threshold, the ICDAS II presented the highest sensitivity (0.80) while the DR showed the highest specificity (0.89); however, the methods with the greatest AUC values at D1 threshold were DR and QLF-D (0.80 and 0.80 respectively). At D3 threshold, the methods with the highest sensitivity were ICDAS II and QLF-D (0.64 and 0.64 respectively) while the method with the lowest sensitivity was DR (0.50). However, with regard to the AUC values at D3 threshold, the QLF-D presented the highest value (0.76). All modalities showed to have excellent intra-examiner reliability. The newly developed QLF-D was not only able to detect proximal caries, but also showed to have comparable performance to the visual inspection and radiography in detecting proximal caries. QLF-D has the potential to be a useful detection method for proximal caries. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Robust structural identification via polyhedral template matching

    DEFF Research Database (Denmark)

    Larsen, Peter Mahler; Schmidt, Søren; Schiøtz, Jakob

    2016-01-01

    thresholds thereof) to classify atomic structure. As a consequence they are sensitive to strain and thermal displacements, and preprocessing such as quenching or temporal averaging of the atomic positions is necessary to provide reliable identifications. We propose a new method, polyhedral template matching...... to identify structures even in simulations near the melting point, and that it can identify the most common ordered alloy structures as well. In addition, the method makes it easy to identify the local lattice orientation in polycrystalline samples, and to calculate the local strain tensor. An implementation...

  11. Discussion of dosimetric dependencies of experimental light-induced melatonin suppression studies; Diskussion dosimetrischer Aspekte bei experimentellen Studien zur lichtinduzierten Melatoninreduktion

    Energy Technology Data Exchange (ETDEWEB)

    Weber, M.; Schulmeister, K. [ARC Seibersdorf Research (Austria). Akkreditierte Pruefstelle fuer Laser und Optische Strahlung

    2004-07-01

    Based on a literature review, dosimetric dependencies of light-induced melatonin suppression are discussed. The quantity of light used to suppress melatonin in study trials is often given in terms of illuminance at the cornea, as this is easy to measure. The use of the term illuminance for such studies is critically discussed. A more appropriate measure would be effective irradiance. In our work we present a simplified model to estimate the photobiological effective irradiance and the spot size of the retinal image. Important issues which should ideally be considered in melatonin suppression study trials are pointed out. Another aim of this work is to derive from the literature data, up to what time frame the dosedependent relationship between time and melatonin suppression is valid. An evaluation is made of the situation on the workplace with regard to light-induced melatonin suppression. (orig.)

  12. Piezoelectric particle accelerator

    Science.gov (United States)

    Kemp, Mark A.; Jongewaard, Erik N.; Haase, Andrew A.; Franzi, Matthew

    2017-08-29

    A particle accelerator is provided that includes a piezoelectric accelerator element, where the piezoelectric accelerator element includes a hollow cylindrical shape, and an input transducer, where the input transducer is disposed to provide an input signal to the piezoelectric accelerator element, where the input signal induces a mechanical excitation of the piezoelectric accelerator element, where the mechanical excitation is capable of generating a piezoelectric electric field proximal to an axis of the cylindrical shape, where the piezoelectric accelerator is configured to accelerate a charged particle longitudinally along the axis of the cylindrical shape according to the piezoelectric electric field.

  13. Application of quantitative light-induced fluorescence to determine the depth of demineralization of dental fluorosis in enamel microabrasion: a case report

    OpenAIRE

    Park, Tae-Young; Choi, Han-Sol; Ku, Hee-Won; Kim, Hyun-Su; Lee, Yoo-Jin; Min, Jeong-Bum

    2016-01-01

    Enamel microabrasion has become accepted as a conservative, nonrestorative method of removing intrinsic and superficial dysmineralization defects from dental fluorosis, restoring esthetics with minimal loss of enamel. However, it can be difficult to determine if restoration is necessary in dental fluorosis, because the lesion depth is often not easily recognized. This case report presents a method for analysis of enamel hypoplasia that uses quantitative light-induced fluorescence (QLF) follow...

  14. Synchrotron radiation structure analyses of the light-induced radical pair of a hexaarylbiimidazolyl derivative. Origin of the spin-multiplicity change

    CERN Document Server

    Kawano, M; Matsubara, K; Imabayashi, H; Mitsumi, M; Toriumi, K; Ohashi, Y

    2002-01-01

    In situ synchrotron radiation structure analyses of a light-induced radical pair from o-Cl-HABI were performed by using an X-ray vacuum camera at 23-70K at the BL02B1 station of SPring-8. The combined results of X-ray analysis with theoretical calculation, IR, and UV-vis spectroscopy reveal that a slight conformational change of the radical pair causes the drastic spin-multiplicity change during 2-140K. (author)

  15. Silicon template preparation for the fabrication of thin patterned gold films via template stripping

    Science.gov (United States)

    Schmidl, G.; Dellith, J.; Dellith, A.; Teller, N.; Zopf, D.; Li, G.; Dathe, A.; Mayer, G.; Hübner, U.; Zeisberger, M.; Stranik, O.; Fritzsche, W.

    2015-12-01

    Metallic nanostructures play an important role in the vast field of modern nanophotonics, which ranges from the life sciences to biomedicine and beyond. Gold is a commonly-used and attractive material for plasmonics in the visible wavelength range, most importantly due to its chemical stability. In the present work, we focused on the different methods of plasmonic nanostructure fabrication that possess the greatest potential for cost-efficient fabrication. Initially, reusable (1 0 0) silicon templates were prepared. For this purpose, three different lithography methods (i.e. e-beam, optical, and nanoparticle lithography) were used that correspond to the desired structural scales. The application of a subsequent anisotropic crystal orientation-dependent wet etching process produced well-defined pyramidal structures in a wide variety of sizes, ranging from several microns to less than 100 nm. Finally, a 200 nm-thick gold layer was deposited by means of confocal sputtering on the silicon templates and stripped in order to obtain gold films that feature a surface replica of the initial template structure. The surface roughness that was achieved on the stripped films corresponds well with the roughness of the template used. This makes it possible to prepare cost-efficient high-quality structured films in large quantities with little effort. The gold films produced were thoroughly characterized, particularly with respect to their plasmonic response.

  16. 20 The Tools - 07 Threshold Concepts - Threshold Concepts: Poster template (TC poster template for case study)

    OpenAIRE

    TfLN-Transforming Perspectives project

    2007-01-01

    Part of a toolkit used in the Transforming Perspectives project, looking at using 'threshold concepts' as a framework for identifying areas of conceptual difficulty in disciplinary curricula. This is a blank 'poster' template used by the project by participants sharing 'their' identified threshold concepts with other participants at a seminar series.

  17. Biocompatibility of Soft-Templated Mesoporous Carbons

    Energy Technology Data Exchange (ETDEWEB)

    Gencoglu, Maria F. [Michigan Technological Univ., Houghton, MI (United States). Dept. of Chemical Engineering; Spurri, Amanda [Widener Univ., Chester, PA (United States). Dept. of Chemical Engineering; Franko, Mitchell [Widener Univ., Chester, PA (United States). Dept. of Chemical Engineering; Chen, Jihua [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Center for Nanophase Materials Science (CNMS); Hensley, Dale K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Center for Nanophase Materials Science (CNMS); Heldt, Caryn L. [Michigan Technological Univ., Houghton, MI (United States). Dept. of Chemical Engineering; Saha, Dipendu [Widener Univ., Chester, PA (United States). Dept. of Chemical Engineering

    2014-08-21

    We report that soft-templated mesoporous carbon is morphologically a non-nano type of carbon. It is a relatively newer variety of biomaterial, which has already demonstrated its successful role in drug delivery applications. To investigate the toxicity and biocompatibility, we introduced three types of mesoporous carbons with varying synthesis conditions and pore textural properties. We compared the Brunauer–Emmett–Teller (BET) surface area and pore width and performed cytotoxicity experiments with HeLa cells, cell viability studies with fibroblast cells and hemocomapatibility studies. Cytotoxicity tests reveal that two of the carbons are not cytotoxic, with cell survival over 90%. The mesoporous carbon with the highest surface area showed slight toxicity (~70% cell survival) at the highest carbon concentration of 500 μg/mL. Fibroblast cell viability assays suggested high and constant viability of over 98% after 3 days with no apparent relation with materials property and good visible cell-carbon compatibility. No hemolysis (<1%) was confirmed for all the carbon materials. Protein adsorption experiments with bovine serum albumin (BSA) and fibrinogen revealed a lower protein binding capacity of 0.2–0.6 mg/m2 and 2–4 mg/m2 for BSA and fibrinogen, respectively, with lower binding associated with an increase in surface area. The results of this study confirm the biocompatibility of soft-templated mesoporous carbons.

  18. Kinetic theory of amyloid fibril templating.

    Science.gov (United States)

    Schmit, Jeremy D

    2013-05-14

    The growth of amyloid fibrils requires a disordered or partially unfolded protein to bind to the fibril and adapt the same conformation and alignment established by the fibril template. Since the H-bonds stabilizing the fibril are interchangeable, it is inevitable that H-bonds form between incorrect pairs of amino acids which are either incorporated into the fibril as defects or must be broken before the correct alignment can be found. This process is modeled by mapping the formation and breakage of H-bonds to a one-dimensional random walk. The resulting microscopic model of fibril growth is governed by two timescales: the diffusion time of the monomeric proteins, and the time required for incorrectly bound proteins to unbind from the fibril. The theory predicts that the Arrhenius behavior observed in experiments is due to off-pathway states rather than an on-pathway transition state. The predicted growth rates are in qualitative agreement with experiments on insulin fibril growth rates as a function of protein concentration, denaturant concentration, and temperature. These results suggest a templating mechanism where steric clashes due to a single mis-aligned molecule prevent the binding of additional molecules.

  19. Weaving Nanoscale Cloth through Electrostatic Templating.

    Science.gov (United States)

    Champsaur, Anouck M; Mézière, Cécile; Allain, Magali; Paley, Daniel W; Steigerwald, Michael L; Nuckolls, Colin; Batail, Patrick

    2017-08-30

    Here we disclose a simple route to nanoscopic 2D woven structures reminiscent of the methods used to produce macroscopic textiles. We find that the same principles used in macroscopic weaving can be applied on the nanoscale to create two-dimensional molecular cloth from polymeric strands, a molecular thread. The molecular thread is composed of Co6Se8(PEt3)4L2 superatoms that are bridged with L = benzene bis-1,4-isonitrile to form polymer strands. As the superatoms that make up the polymer chain are electrochemically oxidized, they are electrostatically templated by a nanoscale anion, the tetragonal Lindqvist polyoxometalate Mo6O19(2-). The tetragonal symmetry of the dianionic template creates a nanoscale version of the box weave. The crossing points in the weave feature π-stacking of the bridging linker. By examining the steps in the weaving process with single crystal X-ray diffraction, we find that the degree of polymerization at the crossing points is crucial in the cloth formation. 2D nanoscale cloth will provide access to a new generation of smart, multifunctional materials, coatings, and surfaces.

  20. Templated electrodeposition of functional nanostructures: nanowires, nanotubes and nanocubes

    OpenAIRE

    Maijenburg, A.W.

    2014-01-01

    This thesis is entitled “Templated electrodeposition of functional nanostructures: nanowires, nanotubes and nanocubes”. Templated electrodeposition is the synthesis technique that was used throughout this thesis, and it comprises the use of a template with specific shape and dimensions for the formation of different types of nanostructures. Throughout this thesis, three different nanostructures were made: nanowires (Chapters 2 to 6), nanotubes (Chapters 2 and 5) and nanocubes (Chapters 7 and ...

  1. Implementation of a template management interface for document systems

    OpenAIRE

    Kmet, Damjan

    2010-01-01

    In the development of document management systems we are often confronted with the implementation of office packages into the document management system. By doing this, we face similar concerns regarding the implementation of the template, therefore we can put the requirements together and create an interface to manage the template into the document management system. The interface can shorten the time required for the construction and maintenance of templates of the office packages in the do...

  2. Templating fullerenes by domain boundaries of a nanoporous network.

    Science.gov (United States)

    den Boer, Duncan; Han, Ggoch Ddeul; Swager, Timothy M

    2014-01-28

    We present a new templating approach that combines the templating properties of nanoporous networks with the dynamic properties and the lattice mismatch of domain boundaries. This templating approach allows for the inclusion of guests with different sizes without the need for a strict molecular design to tailor the nanoporous network. With this approach, nonperiodic patterns of functional molecules can be formed and studied. We show that domain boundaries in a trimesic acid network are preferred over pores within the network as adsorption sites for fullerenes by a factor of 100-200. Pristine fullerenes of different sizes and functionalized fullerenes were templated in this way.

  3. Directed self-assembly graphoepitaxy template generation with immersion lithography

    Science.gov (United States)

    Ma, Yuansheng; Lei, Junjiang; Andres Torres, J.; Hong, Le; Word, James; Fenger, Germain; Tritchkov, Alexander; Lippincott, George; Gupta, Rachit; Lafferty, Neal; He, Yuan; Bekaert, Joost; Vanderberghe, Geert

    2015-07-01

    We present an optimization methodology for the template designs of subresolution contacts using directed self-assembly (DSA) with graphoepitaxy and immersion lithography. We demonstrate the flow using a 60-nm-pitch contact design in doublet with Monte Carlo simulations for DSA. We introduce the notion of template error enhancement factor (TEEF) to gauge the sensitivity of DSA printing infidelity to template printing infidelity and evaluate optimized template designs with TEEF metrics. Our data show that source mask optimization and inverse lithography technology are critical to achieve sub-80 nm non-L0 pitches for DSA patterns using 193i.

  4. Light-induced fos expression in intrinsically photosensitive retinal ganglion cells in melanopsin knockout (opn4 mice.

    Directory of Open Access Journals (Sweden)

    Gary E Pickard

    Full Text Available Retinal ganglion cells that express the photopigment melanopsin are intrinsically photosensitive (ipRGCs and exhibit robust synaptically driven ON-responses to light, yet they will continue to depolarize in response to light when all synaptic input from rod and cone photoreceptors is removed. The light-evoked increase in firing of classical ganglion cells is determined by synaptic input from ON-bipolar cells in the proximal sublamina of the inner plexiform layer. OFF-bipolar cells synapse with ganglion cell dendrites in the distal sublamina of the inner plexiform layer. Of the several types of ipRGC that have been described, M1 ipRGCs send dendrites exclusively into the OFF region of the inner plexiform layer where they stratify near the border of the inner nuclear layer. We tested whether M1 ipRGCs with dendrites restricted to the OFF sublamina of the inner plexiform layer receive synaptic ON-bipolar input by examining light-induced gene expression in vivo using melanopsin knockout mice. Mice in which both copies of the melanopsin gene (opn4 have been replaced with the tau-lacZ gene (homozygous tau-lacZ(+/+ knockin mice are melanopsin knockouts (opn4(-/- but M1 ipRGCs are specifically identified by their expression of beta-galactosidase. Approximately 60% of M1 ipRGCs in Opn4(-/- mice exposed to 3 hrs of light expressed c-Fos; no beta-galactosidase-positive RGCs expressed c-Fos in the dark. Intraocular application of L-AP4, a compound which blocks transmission of visual signals between photoreceptors and ON-bipolar cells significantly reduced light-evoked c-Fos expression in M1 ipRGCs compared to saline injected eyes (66% saline vs 27% L-AP4. The results are the first description of a light-evoked response in an ipRGC lacking melanopsin and provide in vivo confirmation of previous in vitro observations illustrating an unusual circuit in the retina in which ganglion cells sending dendrites to the OFF sublamina of the inner plexiform layer

  5. The erosive potential of commercially available mouthrinses on enamel as measured by Quantitative Light-induced Fluorescence (QLF).

    Science.gov (United States)

    Pretty, I A; Edgar, W M; Higham, S M

    2003-07-01

    Longitudinal in vitro. Previously extracted, caries free, human premolars were selected and prepared by gentle pumicing and coating in an acid-resistant nail-varnish save for an exposed enamel window on the buccal surface. Each was assigned to one of eight groups (six per group, 10 in positive control); positive control (citric acid, pH 2.7, F(-) 0 ppm), negative control (pH 7.0, F(-) 0 ppm) Listerine (pH 3.87, F(-) 0.021 ppm), Tesco Value (pH 6.05, F(-) 289.00 ppm), Tesco Total Care (pH 6.20, F(-) 313.84 ppm), Sainsbury's (pH 6.15, F(-) 365.75 ppm), Sensodyne (pH 6.12, F(-) 285.30 ppm) and Corsodyl (pH 5.65, F(-) 0 ppm). The titratable acid values (TAV) for each rinse were established using volume (ml) of 0.1 M NaOH to achieve pH 7. Fluoride values were obtained by ion selective electrode. The solutions were kept at 37 degrees C and gently agitated. Teeth were removed at hourly intervals for 15 h, air-dried and subjected to Quantitative Light-induced Fluorescence (QLF) examination by a blinded examiner and DeltaQ values recorded. At the conclusion of the study each of the positive control teeth and one from each other group were sectioned through the eroded lesion, ground and polished to 100 micrometers and subjected to transverse microradiography and DeltaZ recorded for validation. TAVs were: Listerine 2.45 L > Sainsbury's 0.35 ml >Tesco Total Care 0.14 ml > Tesco Value 0.08 ml > Corsodyl 0.10 ml >Sensodyne 0.9 ml. DeltaQ increased over time for the positive control, (0 h 0.2, 10 h 95.2, 15 h 152.3). Negative controls remained stable. The increase in DeltaQ for each rinse after 15 h was Listerine (9.3(+/-7.2)), Corsodyl (1.5(+/-1.2)), Tesco Value (1.8(+/-1.2)), Tesco Total Care (1.4(+/-1.1)), Sainsbury's (3.4(+/-2.2)), Sensodyne (0.9(+/-1.6)). TMR confirmed the presence/absence of erosive lesions. QLF effectively monitored erosion in the positive controls and lack of erosion in the NC. Only one mouthrinse (Listerine) caused any erosion compared to the negative

  6. Involvement of cannabinoid receptor type 2 in light-induced degeneration of cells from mouse retinal cell line in vitro and mouse photoreceptors in vivo.

    Science.gov (United States)

    Imamura, Tomoyo; Tsuruma, Kazuhiro; Inoue, Yuki; Otsuka, Tomohiro; Ohno, Yuta; Ogami, Shiho; Yamane, Shinsaku; Shimazawa, Masamitsu; Hara, Hideaki

    2017-11-10

    Earlier studies showed that the expressions of the agonists of the cannabinoid receptors are reduced in the vitreous humor of patients with age-related macular degeneration (AMD), and the cannabinoid type 2 receptor is present in the retinas of rats and monkeys. The purpose of this study was to determine whether the cannabinoid type 2 receptor is involved in the light-induced death of cultured 661W cells, an immortalized murine retinal cell line, and in the light-induced retinal degeneration in mice. Time-dependent changes in the expression and location of retinal cannabinoid type 2 receptor were determined by Western blot and immunostaining. The cannabinoid type 2 receptor was down-regulated in murine retinae and cone cells. In the in vitro studies, HU-308, a cannabinoid type 2 receptor agonist, had a protective effect on the light-induced death of 661W cells, and this effect was attenuated by SR144528, a cannabinoid type 2 receptor antagonist. Because the cannabinoid type 2 receptor is a G-protein coupled receptor and is coupled with Gi/o protein, we investigated the effects of the cAMP-dependent protein kinase (PKA). HU-308 and H89, a PKA inhibitor, deactivated PKA in retinal cone cells, and H89 also suppressed light-induced cell death. For the in vivo studies, a cannabinoid type 2 receptor agonist, HU-308, or an antagonist, SR144528, was injected intravitreally into mouse eyes before the light exposure. Electroretinography was used to determine the physiological status of the retinas. Injection of HU-308 improved the a- and b-waves of the ERGs and also the thickness of the outer nuclear layer of the murine retina after light exposure. These findings indicate that the cannabinoid type 2 receptor is involved in the light-induced retinal damage through PKA signaling. Thus, activation of cannabinoid type 2 receptor may be a therapeutic approach for light-associated retinal diseases. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Light-induced reduction of silver ions to silver nanoparticles in aquatic environments by microbial extracellular polymeric substances (EPS).

    Science.gov (United States)

    Zhang, Xin; Yang, Chuan-Wang; Yu, Han-Qing; Sheng, Guo-Ping

    2016-12-01

    Microbial extracellular polymeric substances (EPS) widely exist in natural environments and affect the migration and transformation of pollutants in aquatic environments. Previous works report that EPS have some reducing functional groups and can reduce heavy metals. However, because of the weak reducing capability of EPS, the reduction of heavy metals by EPS without cells is extremely slow, and its effect on heavy metals species is insignificant. In this work, the accelerated reduction of silver ions (Ag+) by EPS from Shewanella oneidensis MR-1 under illumination was investigated. UV-visible spectroscopy, transmission electron microscopy (TEM) coupled with an energy dispersive spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS) were used to confirm the formation of silver nanoparticles (AgNPs) via the reduction of Ag+ by EPS under light illumination. The Ag+ reduction by EPS follows pseudo-first-order kinetics under both visible and UV light, and the light irradiation can significantly accelerate AgNPs formation. On the one hand, visible light can excite AgNPs for their surface plasma resonance (SPR) and accelerate the electrons from the EPS to adjacent Ag+. On the other hand, EPS molecules may be excited by UV light to produce strong reducing species, which enhance Ag+ reduction. Moreover, pH, dissolved oxygen were found to affect the formation of AgNPs by EPS. This work proves the reducing capability of EPS on the reduction of Ag+, and this process can be accelerated under light illumination, which may affect the speciation and transformation of heavy metals in natural waters. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. 2014 CERN Accelerator Schools: Plasma Wake Acceleration

    CERN Multimedia

    2014-01-01

    A specialised school on Plasma Wake Acceleration will be held at CERN, Switzerland from 23-29 November, 2014.   This course will be of interest to staff and students in accelerator laboratories, university departments and companies working in or having an interest in the field of new acceleration techniques. Following introductory lectures on plasma and laser physics, the course will cover the different components of a plasma wake accelerator and plasma beam systems. An overview of the experimental studies, diagnostic tools and state of the art wake acceleration facilities, both present and planned, will complement the theoretical part. Topical seminars and a visit of CERN will complete the programme. Further information can be found at: http://cas.web.cern.ch/cas/PlasmaWake2014/CERN-advert.html http://indico.cern.ch/event/285444/

  9. Virus Assemblies as Templates for Nanocircuits

    Energy Technology Data Exchange (ETDEWEB)

    James N Culver; Michael T Harris

    2011-08-31

    The goals of this project were directed at the identification and characterization of bio-mineralization processes and patterning methods for the development of nano scale materials and structures with novel energy and conductive traits. This project utilized a simple plant virus as a model template to investigate methods to attach and coat metals and other inorganic compounds onto biologically based nanotemplates. Accomplishments include: the development of robust biological nanotemplates with enhanced inorganic coating activities; novel coating strategies that allow for the deposition of a continuous inorganic layer onto a bio-nanotemplate even in the absence of a reducing agent; three-dimensional patterning methods for the assemble of nano-featured high aspect ratio surfaces and the demonstrated use of these surfaces in enhancing battery and energy storage applications. Combined results from this project have significantly advanced our understanding and ability to utilize the unique self-assembly properties of biologically based molecules to produce novel materials at the nanoscale level.

  10. A generic process template for continuous pharmaceutical production

    DEFF Research Database (Denmark)

    Singh, Ravendra; Rozada-Sanches, Raquel; Dean, William

    2012-01-01

    In the work reported here, a conceptual generic continuous process template for pharmaceutical production is presented. The template is demonstrated on a nitro reduction case study that should in principle be generic such that it can handle a series of substrates with similar molecular...

  11. Excel Template For Processing Examination Results For Higher

    African Journals Online (AJOL)

    ABSTRACT: In this work, we designed, developed and implemented an examination result processing template for all the Postgraduate programmes in the Faculty of Science, Kaduna State. University, Kaduna. The designed template when fed in with data computes and grades students appropriately. Its design was done ...

  12. Transdisciplinary Pedagogical Templates and Their Potential for Adaptive Reuse

    Science.gov (United States)

    Dobozy, Eva; Dalziel, James

    2016-01-01

    This article explores the use and usefulness of carefully designed transdisciplinary pedagogical templates (TPTs) aligned to different learning theories. The TPTs are based on the Learning Design Framework outlined in the Larnaca Declaration (Dalziel et al. in this collection). The generation of pedagogical plans or templates is not new. However,…

  13. A non-parametric 2D deformable template classifier

    DEFF Research Database (Denmark)

    Schultz, Nette; Nielsen, Allan Aasbjerg; Conradsen, Knut

    2005-01-01

    feature space the ship-master will be able to interactively define a segmentation map, which is refined and optimized by the deformable template algorithms. The deformable templates are defined as two-dimensional vector-cycles. Local random transformations are applied to the vector-cycles, and stochastic...

  14. New NIR light-curve templates for classical Cepheids

    NARCIS (Netherlands)

    Inno, L.; Matsunaga, N.; Romaniello, M.; Bono, G.; Monson, A.; Ferraro, I.; Iannicola, G.; Persson, E.; Buonanno, R.; Freedman, W.; Gieren, W.; Groenewegen, M.A.T.; Ita, Y.; Laney, C.D.; Lemasle, B.; Madore, B.F.; Nagayama, T.; Nakada, Y.; Nonino, M.; Pietrzyński, G.; Primas, F.; Scowcroft, V.; Soszyński, I.; Tanabé, T.; Udalski, A.

    2015-01-01

    Aims. We present new near-infrared (NIR) light-curve templates for fundamental (FU, J, H, KS) and first overtone (FO, J) classical Cepheids. The new templates together with period-luminosity and period-Wesenheit (PW) relations provide Cepheid distances from single-epoch observations with a precision

  15. Tailoring the porosity of hierarchical zeolites by carbon-templating

    DEFF Research Database (Denmark)

    Zhu, Kake; Egeblad, Kresten; Christensen, Claus H.

    2008-01-01

    We report the synthesis and characterization of a series of hierarchical porous zeolite single crystal materials with a range of porosities made available by carbon-templating using differently-sized carbon particles as templates for the additional non-micropore porosity. The materials were...

  16. Proline-catalysed asymmetric ketol cyclizations: The template ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. A modified template mechanism based on modelling studies of energy minimised complexes is presented for the asymmetric proline-catalysed cyclization of triketones 1, 2 and 3 to the 2S,3S-ketols. 1a, 2a and 3a respectively. The template model involves a three-point contact as favoured in enzyme– substrate ...

  17. Proline-catalysed asymmetric ketol cyclizations: The template ...

    Indian Academy of Sciences (India)

    A modified template mechanism based on modelling studies of energy minimised complexes is presented for the asymmetric proline-catalysed cyclization of triketones 1, 2 and 3 to the 2, 3-ketols 1a, 2a and 3a respectively. The template model involves a three-point contact as favoured in enzyme-substrate interactions.

  18. Design of a process template for amine synthesis

    DEFF Research Database (Denmark)

    Singh, Ravendra; Godfrey, Andy; Gregertsen, Björn

    A conceptual nitro reduction process template that should be generic such that it can handle a series of substrates with sim ilar molecular functionality has been designed. The reduction process is based on a continuo us plug-flow slurry reactor. The process template aims at speeding up the proce...

  19. High Energy Particle Accelerators

    CERN Multimedia

    Audio Productions, Inc, New York

    1960-01-01

    Film about the different particle accelerators in the US. Nuclear research in the US has developed into a broad and well-balanced program.Tour of accelerator installations, accelerator development work now in progress and a number of typical experiments with high energy particles. Brookhaven, Cosmotron. Univ. Calif. Berkeley, Bevatron. Anti-proton experiment. Negative k meson experiment. Bubble chambers. A section on an electron accelerator. Projection of new accelerators. Princeton/Penn. build proton synchrotron. Argonne National Lab. Brookhaven, PS construction. Cambridge Electron Accelerator; Harvard/MIT. SLAC studying a linear accelerator. Other research at Madison, Wisconsin, Fixed Field Alternate Gradient Focusing. (FFAG) Oakridge, Tenn., cyclotron. Two-beam machine. Comments : Interesting overview of high energy particle accelerators installations in the US in these early years. .

  20. Improved plasma accelerator

    Science.gov (United States)

    Cheng, D. Y.

    1971-01-01

    Converging, coaxial accelerator electrode configuration operates in vacuum as plasma gun. Plasma forms by periodic injections of high pressure gas that is ionized by electrical discharges. Deflagration mode of discharge provides acceleration, and converging contours of plasma gun provide focusing.

  1. A series of template plasmids for Escherichia coli genome engineering.

    Science.gov (United States)

    Deb, Shalini S; Reshamwala, Shamlan M S; Lali, Arvind M

    2016-06-01

    Metabolic engineering strategies often employ multi-copy episomal vectors to overexpress genes. However, chromosome-based overexpression is preferred as it avoids the use of selective pressure and reduces metabolic burden on the cell. We have constructed a series of template plasmids for λ Red-mediated Escherichia coli genome engineering. The template plasmids allow construction of genome integrating cassettes that can be used to integrate single copies of DNA sequences at predetermined sites or replace promoter regions. The constructed cassettes provide flexibility in terms of expression levels achieved and antibiotics used for selection, as well as allowing construction of marker-free strains. The modular design of the template plasmids allows replacement of genetic parts to construct new templates. Gene integration and promoter replacement using the template plasmids are illustrated. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. The CERN Accelerator School

    CERN Multimedia

    2016-01-01

    Introduction to accelerator physics The CERN Accelerator School: Introduction to Accelerator Physics, which should have taken place in Istanbul, Turkey, later this year has now been relocated to Budapest, Hungary.  Further details regarding the new hotel and dates will be made available as soon as possible on a new Indico site at the end of May.

  3. Accelerators and Dinosaurs

    CERN Multimedia

    Turner, Michael Stanley

    2003-01-01

    Using naturally occuring particles on which to research might have made accelerators become extinct. But in fact, results from astrophysics have made accelerator physics even more important. Not only are accelerators used in hospitals but they are also being used to understand nature's inner workings by searching for Higgs bosons, CP violation, neutrino mass and dark matter (2 pages)

  4. RS9, a novel Nrf2 activator, attenuates light-induced death of cells of photoreceptor cells and Müller glia cells.

    Science.gov (United States)

    Inoue, Yuki; Shimazawa, Masamitsu; Noda, Yasuhiro; Nagano, Ryota; Otsuka, Tomohiro; Kuse, Yoshiki; Nakano, Yukimichi; Tsuruma, Kazuhiro; Nakagami, Yasuhiro; Hara, Hideaki

    2017-06-01

    The retina is highly sensitive to oxidative stress because of its high consumption of oxygen associated with the phototransductional processes. Recent findings have suggested that oxidative stress is involved in the pathology of age-related macular degeneration, a progressive degeneration of the central retina. A well-known environmental risk factor is light exposure, as excessive and continuous light exposure can damage photoreceptors. Nuclear factor-erythroid 2-related factor 2 (Nrf2) is a transcriptional factor that controls antioxidative responses and phase 2 enzymes. Thus, we hypothesized that RS9, a specific activator of Nrf2, decreases light-induced retinal cell death in vivo and in vitro. Nrf2 was detected in the nucleus of the 661W cells exposed to RS9 and also after light exposure, and the Nrf2-antioxidant response element binding was increased in 661W cells after exposure to RS9. Consequentially, the expression of the phase 2 enzyme's mRNAs of Ho-1, Nqo-1, and Gclm genes was increased in 661W cells after exposure to RS9. Furthermore, RS9 decreased the light-induced death of 661W cells (2500 lux, 24 h), and also reduced the functional damages and the histological degeneration of the nuclei in the outer nuclear layer or the retina in the in vivo studies (8000 lux, 3 h). Heme oxygenase-1 was increased after light exposure, and Nrf2 was translocated into the nucleus after light exposure in vivo. Silencing of Ho-1 reduced the protective effects of RS9 against light-induced death of 661W cells. These findings indicate that RS9 has therapeutic potential for retinal diseases that are aggravated by light exposure. © 2017 International Society for Neurochemistry.

  5. Fatty acid transport protein 4 (FATP4) prevents light-induced degeneration of cone and rod photoreceptors by inhibiting RPE65 isomerase.

    Science.gov (United States)

    Li, Songhua; Lee, Jungsoo; Zhou, Yongdong; Gordon, William C; Hill, James M; Bazan, Nicolas G; Miner, Jeffrey H; Jin, Minghao

    2013-02-13

    Although rhodopsin is essential for sensing light for vision, it also mediates light-induced apoptosis of photoreceptors in mouse. RPE65, which catalyzes isomerization of all-trans retinyl fatty acid esters to 11-cis-retinol (11cROL) in the visual cycle, controls the rhodopsin regeneration rate and photoreceptor susceptibility to light-induced degeneration. Mutations in RPE65 have been linked to blindness in affected children. Despite such importance, the mechanism that regulates RPE65 function remains unclear. Through unbiased expression screening of a bovine retinal pigment epithelium (RPE) cDNA library, we have identified elongation of very long-chain fatty acids-like 1 (ELOVL1) and fatty acid transport protein 4 (FATP4), which each have very long-chain fatty acid acyl-CoA synthetase (VLCFA-ACS) activity, as negative regulators of RPE65. We found that the VLCFA derivative lignoceroyl (C24:0)-CoA inhibited synthesis of 11cROL, whereas palmitoyl (C16:0)-CoA promoted synthesis of 11cROL. We further found that competition of FATP4 with RPE65 for the substrate of RPE65 was also involved in the mechanisms by which FATP4 inhibits synthesis of 11cROL. FATP4 was predominantly expressed in RPE, and the FATP4-deficient RPE showed significantly higher isomerase activity. Consistent with these results, the regeneration rate of 11-cis-retinaldehyde and the recovery rate for rod light sensitivity were faster in FATP4-deficient mice than wild-type mice. Moreover, FATP4-deficient mice displayed increased accumulation of the cytotoxic all-trans retinaldehyde and hypersusceptibility to light-induced photoreceptor degeneration. Our findings demonstrate that ELOVL1, FATP4, and their products comprise the regulatory elements of RPE65 and play important roles in protecting photoreceptors from degeneration induced by light damage.

  6. The Accelerator Reliability Forum

    CERN Document Server

    Lüdeke, Andreas; Giachino, R

    2014-01-01

    A high reliability is a very important goal for most particle accelerators. The biennial Accelerator Reliability Workshop covers topics related to the design and operation of particle accelerators with a high reliability. In order to optimize the over-all reliability of an accelerator one needs to gather information on the reliability of many different subsystems. While a biennial workshop can serve as a platform for the exchange of such information, the authors aimed to provide a further channel to allow for a more timely communication: the Particle Accelerator Reliability Forum [1]. This contribution will describe the forum and advertise it’s usage in the community.

  7. Decomposition of methyl orange using C-60 fullerene adsorbed on silica gel as a photocatalyst via visible-light induced electron transfer

    OpenAIRE

    Wakimoto, Ryo; Kitamura, Tamako; Ito, Fuyu; Usami, Hisanao; Moriwaki, Hiroshi

    2015-01-01

    Visible-light induced electron transfer reactions of C60 fullerene adsorbed on silica gel (C60/SiO2 powder) to methyl orange in water have been studied. The C60/SiO2 powder was simply prepared by mixing a toluene solution of the C60 fullerene with silica gel followed by evaporating the toluene. Irradiation by visible light (>420 nm) of the methyl orange aqueous solution (25 μM) in the presence of the C60/SiO2 powder and ascorbic acid resulted in the decomposition of the methyl orange. These r...

  8. Synthesis of block copolymers by combination of atom transfer radical polymerization and visible light-induced free radical promoted cationic polymerization.

    Science.gov (United States)

    Kahveci, Muhammet U; Acik, Gokhan; Yagci, Yusuf

    2012-02-27

    A new synthetic approach for the preparation of block copolymers by mechanistic transformation from atom transfer radical polymerization (ATRP) to visible light-induced free radical promoted cationic polymerization is described. A series of halide end-functionalized polystyrenes with different molecular weights synthesized by ATRP were utilized as macro-coinitiators in dimanganese decacarbonyl [Mn(2) (CO)(10) ] mediated free radical promoted cationic photopolymerization of cyclohexene oxide or isobutyl vinyl ether. Precursor polymers and corresponding block copolymers were characterized by spectral, chromatographic, and thermal analyses. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Semiconductor nanowires and templates for electronic applications

    Energy Technology Data Exchange (ETDEWEB)

    Ying, Xiang

    2009-07-15

    This thesis starts by developing a platform for the organized growth of nanowires directly on a planar substrate. For this, a method to fabricate horizontal porous alumina membranes is studied. The second part of the thesis focuses on the study of nanowires. It starts by the understanding of the growth mechanisms of germanium nanowires and follows by the structural and electrical properties at the single nanowire level. Horizontally aligned porous anodic alumina (PAA) was used as a template for the nanowire synthesis. Three PAA arrangements were studied: - high density membranes - micron-sized fingers - multi-contacts Membranes formed by a high density of nanopores were obtained by anodizing aluminum thin films. Metallic and semiconducting nanowires were synthesized into the PAA structures via DC deposition, pulsed electro-depostion and CVD growth. The presence of gold, copper, indium, nickel, tellurium, and silicon nanowires inside PAA templates was verified by SEM and EDX analysis. Further, room-temperature transport measurements showed that the pores are completely filled till the bottom of the pores. In this dissertation, single crystalline and core-shell germanium nanowires are synthesized using indium and bismuth as catalyst in a chemical vapor deposition procedure with germane (GeH{sub 4}) as growth precursor. A systematic growth study has been performed to obtain high aspect-ratio germanium nanowires. The influence of the growth conditions on the final morphology and the crystalline structure has been determined via scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). In the case of indium catalyzed germanium nanowires, two different structures were identified: single crystalline and crystalline core-amorphous shell. The preferential growth axis of both kinds of nanowires is along the [110] direction. The occurrence of the two morphologies was found to only depend on the nanowire dimension. In the case of bismuth

  10. Industrial Application of Accelerators

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Univer...

  11. Industrial Application of Accelerators

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Uni...

  12. Protecting and accelerating adiabatic passage with time-delayed pulse sequences

    CERN Document Server

    Sampedro, Pablo; Sola, Ignacio R

    2016-01-01

    Using numerical simulations of two-photon electronic absorption with femtosecond pulses in Na$_2$ we show that: i) it is possible to avoid the characteristic saturation or dumped Rabi oscillations in the yield of absorption by time-delaying the laser pulses; ii) it is possible to accelerate the onset of adiabatic passage by using the vibrational coherence starting in a wave packet; and iii) it is possible to prepare the initial wave packet in order to achieve full state-selective transitions with broadband pulses. The findings can be used, for instance, to achieve ultrafast adiabatic passage by light-induced potentials and understand its intrinsic robustness.

  13. YBCO nanowires grown by the alumina template method

    Energy Technology Data Exchange (ETDEWEB)

    Koblischka, Michael R.; Hartmann, Uwe [Experimental Physics, Saarland University, Campus C 6 3, D-66123 Saarbruecken (Germany); Koblischka-Veneva, Anjela [Functional Materials, Saarland University, Campus C 6 3, D-66123 Saarbruecken (Germany); Skumryev, Vassil [Institut Catala de Recerca i Estudis Avancats (ICREA), Barcelona (Spain)

    2010-07-01

    YBa{sub 2}Cu{sub 3}O{sub x} (YBCO) nanowires are grown by the anodized alumina template method, starting from pre-sintered YBCO powder. As templates, we have employed commercially available alumina templates with pore diameters of 30 nm and 100 nm, and an overall thickness of 50 {mu}m. An oxygen annealing step is required to obtain superconducting nanowires. Superconductivity with a transition temperature of 88 K is confirmed by means of magnetic susceptibility measurements. The resulting nanowires are analyzed in detail employing electron microscopy and atomic force microscopy. The separation of the nanowires of the templates is not yet established, but individual nanowires of up to 10 {mu}m length could be separated from the template. In several cases, the template pores are not completely filled by the superconducting material, which implies that the observed length is similar to what could be expected from regular grain growth. Resistance measurements using cut pieces of the filled templates were carried out as a function of temperature. These pieces were covered with Au films on top and bottom in order to provide the electric contacts. The measurements confirmed the magnetically determined critical temperatures.

  14. Radiographic templating of total hip arthroplasty for femoral neck fractures.

    Science.gov (United States)

    Lakstein, Dror; Bachar, Ira; Debi, Ronen; Lubovsky, Omri; Cohen, Ornit; Tan, Zachary; Atoun, Ehud

    2017-04-01

    The purpose of this study was to evaluate the use of pre-operative digital templating to minimize complications including limb length discrepancy (LLD), intraoperative fractures and early dislocations in patients with intracapsular femoral neck fractures. We retrospectively compared 23 patients undergoing total hip arthroplasty (THA) for intracapsular femoral fractures with pre-operative digital templating and 48 patients without templating. The mean post-operative LLD was significantly lower in patients who had pre-operative templating than in the control group (6.7 vs. 11.5 mm, p = 0.023). Only three patients (13 %) with templating had LLD greater than 1.5 cm, compared to the 15 patients (31 %) without templating (p = 0.17). In eight cases the final femoral stem size matched the templated size, while 19 patients were within two size increments. Complications included one dislocation and one intra-operative fracture in the control group. The present study demonstrated that careful pre-operative planning may reduce LLD in patients undergoing THA due to intracapsular hip fractures.

  15. Alkyltin Keggin Clusters Templated by Sodium.

    Science.gov (United States)

    Saha, Sumit; Park, Deok-Hie; Hutchison, Danielle C; Olsen, Morgan R; Zakharov, Lev N; Marsh, David; Goberna-Ferrón, Sara; Frederick, Ryan T; Diulus, J Trey; Kenane, Nizan; Herman, Gregory S; Johnson, Darren W; Keszler, Douglas A; Nyman, May

    2017-08-14

    Dodecameric (Sn12 ) and hexameric topologies dominate monoalkyltin-oxo cluster chemistry. Their condensation, triggered by radiation exposure, recently produced unprecedented patterning performance in EUV lithography. A new cluster topology was crystallized from industrial n-BuSnOOH, and additional characterization techniques indicate other clusters are present. Single-crystal X-ray analysis reveals a β-Keggin cluster, which is known but less common than other Keggin isomers in polyoxometalate and polyoxocation chemistry. The structure is formulated [NaO4 (BuSn)12 (OH)3 (O)9 (OCH3 )12 (Sn(H2 O)2 )] (β-NaSn13 ). SAXS, NMR, and ESI MS differentiate β-NaSn13 , Sn12 , and other clusters present in crude "n-BuSnOOH" and highlight the role of Na as a template for alkyltin Keggin clusters. Unlike other alkyltin clusters that are cationic, β-NaSn13 is neutral. Consequently, it stands as a unique model system, absent of counterions, to study the transformation of clusters to films and nanopatterns. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Template-assisted fabrication of protein nanocapsules

    Science.gov (United States)

    Dougherty, Shelley A.; Liang, Jianyu; Kowalik, Timothy F.

    2009-02-01

    Bionanomaterials have recently begun to spark a great amount of interest and could potentially revolutionize biomedical research. Nanoparticles, nanocapsules, and nanotubular structures are becoming attractive options in drug and gene delivery. The size of the delivery vehicles greatly impacts cellular uptake and makes it highly desirable to precisely control the diameter and length of nanocarriers to make uniform nanoparticles at low cost. Carbon nanotubes have shown great potential within the field of drug and gene delivery. However, their insolubility and cytotoxicity could severely delay FDA approval. A desirable alternative would be to fabricate nanostructures from biomaterials such as proteins, peptides, or liposomes, which are already FDA approved. In this article we demonstrate the preparation of protein nanocapsules with both ends sealed using a template-assisted alternate immersion method combined with controlled cleaving. Glucose oxidase nanocapsules with controllable diameter, wall thickness, and length were fabricated and characterized with SEM and TEM. The biochemical activity of glucose oxidase in the form of nanocapsules after processing was confirmed using UV spectrometry. Our future work will explore proteins suitable for drug encapsulation and cellular uptake and will focus on optimizing the cleaving process to gain precise control over the length of the nanocapsules.

  17. Open Cell Aerogel Foams via Emulsion Templating.

    Science.gov (United States)

    Teo, Nicholas; Jana, Sadhan C

    2017-10-26

    The water-in-oil emulsion-templating method is used in this work for fabrication of open cell aerogel foams from syndiotactic polystyrene (sPS). A surfactant-stabilized emulsion is prepared at 60-100 °C by dispersing water in a solution of sPS in toluene. sPS gel, formed upon cooling of the emulsion to room temperature, locks the water droplets inside the gel. The gel is solvent exchanged in ethanol and then dried under supercritical condition of carbon dioxide to yield the aerogel foams. The aerogel foams show a significant fraction of macropores with a diameter of a few tens of micrometers, defined as macrovoids that originated from the emulsified water droplets. In conjunction, customary macropores of diameter 50-200 nm are derived from sPS gels. The macrovoids add additional openness to the aerogel structures. This paper evaluates the structural characteristics of the macrovoids, such as diameter distribution, macrovoid interconnect density, and skin layer density, in conjunction with the final aerogel foam properties.

  18. Convex Lens-Induced Nanoscale Templating

    Science.gov (United States)

    Berard, Daniel; Michaud, Francois; McFaul, Christopher; Mahsid, Sara; Reisner, Walter; Leslie, Sabrina

    2014-03-01

    We demonstrate a new platform, ``Convex Lens-Induced Nanoscale Templating'' (CLINT), for dynamic manipulation and trapping of single DNA molecules. In the CLINT technique, the curved surface of a convex lens is used to deform a flexible coverslip above a substrate containing embedded nanotopography, creating a nanoscale gap that can be adjusted during an experiment to confine molecules within the embedded nanostructures. Critically, CLINT has the capability of actively transforming a macroscale flow-cell into a nanofluidic device without need for high-temperature direct bonding, leading to ease of sample loading and greater accessibility of the surface. Moreover, as DNA molecules present in the gap will be driven into the embedded topography from above, CLINT eliminates the need for the high pressures or electric fields necessitated by direct bonded nanofluidic devices for loading DNA in the confined structures. To demonstrate the versatility of CLINT, we confine DNA to nanogroove structures, demonstrating DNA nanochannel-based stretching. Using ionic strengths that are in line with typical biological buffers, we have successfully extended DNA in sub 30nm nanochannels, achieving high stretching (90%) that is in good agreement with Odijk deflection theory.

  19. Templated Chemically Deposited Semiconductor Optical Fiber Materials

    Science.gov (United States)

    Sparks, Justin R.; Sazio, Pier J. A.; Gopalan, Venkatraman; Badding, John V.

    2013-07-01

    Chemical deposition is a powerful technology for fabrication of planar microelectronics. Optical fibers are the dominant platform for telecommunications, and devices such as fiber lasers are forming the basis for new industries. High-pressure chemical vapor deposition (HPCVD) allows for conformal layers and void-free wires of precisely doped crystalline unary and compound semiconductors inside the micro-to-nanoscale-diameter pores of microstructured optical fibers (MOFs). Drawing the fibers to serve as templates into which these semiconductor structures can be fabricated allows for geometric design flexibility that is difficult to achieve with planar fabrication. Seamless coupling of semiconductor optoelectronic and photonic devices with existing fiber infrastructure thus becomes possible, facilitating all-fiber technological approaches. The deposition techniques also allow for a wider range of semiconductor materials compositions to be exploited than is possible by means of preform drawing. Gigahertz bandwidth junction-based fiber devices can be fabricated from doped crystalline semiconductors, for example. Deposition of amorphous hydrogenated silicon, which cannot be drawn, allows for the exploitation of strong nonlinear optical function in fibers. Finally, crystalline compound semiconductor fiber cores hold promise for high-power infrared light-guiding fiber devices and subwavelength-resolution, large-area infrared imaging.

  20. Macroporous inorganic solids from a biomineral template

    Science.gov (United States)

    Yue, Wenbo; Park, Robert J.; Kulak, Alex N.; Meldrum, Fiona C.

    2006-08-01

    A range of macroporous inorganic solids, with unique, sponge-like structures were synthesised by templating sea urchin skeletal plates. Although composed of a single crystal of calcite, a sea urchin plate exhibits a bicontinuous morphology with pores of diameter 10-15 μm. As both the solid and porous fractions of the plate exhibit identical form and dimensions, filling the porous network with an alternative material and dissolving away the CaCO 3 generates a cast with identical morphology to the original plate. The versatility of this approach is demonstrated in this paper, which provides both a review of previously published work, and a description of the application to a number of new systems. Macroporous metals, including gold and nickel were synthesised either from pre-prepared particles or via electroless deposition, while silica and titania were generated by sol-gel techniques. Sponge-like polymer membranes, formed as casts of the sea urchin plates, were also used as an environment in which to precipitate a range of single crystals with complex morphologies: CaCO 3, SrSO 4, PbSO 4, PbCO 3, NaCl and CuSO 4·5H 2O. These experiments demonstrate that single crystals with intricate forms are not restricted to the realms of biology, but that shape constraint provides an extremely general route for morphological control.

  1. Iris-based authentication system with template protection and renewability

    Science.gov (United States)

    Ercole, Chiara; Campisi, Patrizio; Neri, Alessandro

    2007-10-01

    Biometrics is the most emerging technology for automatic people authentication, nevertheless severe concerns raised about security of such systems and users' privacy. In case of malicious attacks toward one or more components of the authentication system, stolen biometric features cannot be replaced. This paper focuses on securing the enrollment database and the communication channel between such database and the matcher. In particular, a method is developed to protect the stored biometric templates, adapting the fuzzy commitment scheme to iris biometrics by exploiting error correction codes tailored on template discriminability. The aforementioned method allows template renewability applied to iris based authentication and guarantees high security performing the match in the encrypted domain.

  2. Irreversible light-soaking effect of perovskite solar cells caused by light-induced oxygen vacancies in titanium oxide

    Science.gov (United States)

    Liu, Gang; Yang, Bingchu; Liu, Baoxing; Zhang, Chujun; Xiao, Si; Yuan, Yongbo; Xie, Haipeng; Niu, Dongmei; Yang, Junliang; Gao, Yongli; Zhou, Conghua

    2017-10-01

    An irreversible light-soaking effect was disclosed in perovskite solar cells using TiO2 as an electron transporting layer. The power conversion efficiency of a fresh device was improved more by twice after light soaking for 15 min and then remained 70% even though the device was recovered in the dark for 4 days. The buried mechanism was explored by shedding light on the interaction between light and titanium dioxide. Oxygen vacancies in TiO2 were found to be increased by light-soaking, especially for wavelengths shorter than 400 nm. Such vacancies enhanced the N-type doping in the semiconductor, which not only increased the conductivity of the titania film but also accelerated the charge extraction rate between perovskite crystallites and titania, and finally contributed to upgraded power conversion efficiency.

  3. The biogeochemical cycle of the adsorbed template. I - formation of the template

    Science.gov (United States)

    Lazard, Daniel; Lahav, Noam; Orenberg, J. B.

    1987-01-01

    Experimental results are presented for the verification of the first adsorption step of the 'adsorbed template' biogeochemical cycle, a simple model for a primitive prebiotic replication system. The adsorption of Poly-C, Poly-U, Poly-A, Poly-G, and 5'-AMP, 5'-GMP, 5'-CMP and 5'-UMP onto gypsum was studied. It was found that under the conditions of the experiment, the polymers have a very high affinity for the mineral surface, while the monomers adsorb much less efficiently.

  4. Involvement of CarA/LitR and CRP/FNR family transcriptional regulators in light-induced carotenoid production in Thermus thermophilus.

    Science.gov (United States)

    Takano, Hideaki; Kondo, Masato; Usui, Noriyoshi; Usui, Toshimitsu; Ohzeki, Hiromichi; Yamazaki, Ryuta; Washioka, Misato; Nakamura, Akira; Hoshino, Takayuki; Hakamata, Wataru; Beppu, Teruhiko; Ueda, Kenji

    2011-05-01

    Members of the CarA/LitR family are MerR-type transcriptional regulators that contain a C-terminal cobalamin-binding domain. They are thought to be involved in light-induced transcriptional regulation in a wide variety of nonphototrophic bacteria. Based on the distribution of this kind of regulator, the current study examined carotenoid production in Thermus thermophilus, and it was found to occur in a light-induced manner. litR and carotenoid and cobalamin biosynthesis genes were all located on the large plasmid of this organism. litR or cobalamin biosynthesis gene knockout mutants were unable to switch off carotenoid production under dark conditions, while a mutant with a mutation in the downstream gene adjacent to litR (TT_P0055), which encodes a CRP/FNR family transcriptional regulator, was unable to produce carotenoids, irrespective of light conditions. Overall, genetic and biochemical evidence indicates that LitR is bound by cobalamin and associates with the intergenic promoter region between litR and crtB (phytoene synthase gene), repressing the bidirectional transcription of litR and crtB. It is probable that derepression of LitR caused by some photodependent mechanism induces the expression of TT_P0055 protein, which serves as a transcriptional activator for the crtB operon and hence causes the expression of carotenoid biosynthesis and the DNA repair system under light condition.

  5. Nitrogen and Fluorine Codoped, Colloidal TiO2Nanoparticle: Tunable Doping, Large Red-Shifted Band Edge, Visible Light Induced Photocatalysis, and Cell Death.

    Science.gov (United States)

    Biswas, Aritra; Chakraborty, Atanu; Jana, Nikhil R

    2018-01-17

    Visible light photocatalysis by TiO 2 requires efficient doping of other elements with red-shifted band edge to the visible region. However, preparation of such TiO 2 with tunable doping is challenging. Here we report a method of making nitrogen (N) and fluorine (F) codoped TiO 2 nanoparticle with tunable doping between 1 and 7 at. %. The preparation of N, F codoped TiO 2 nanoparticle involves reaction of colloidal TiO 2 nanorods with an ammonium fluoride-urea mixture at 300 °C, and the extent of N/F doping is tuned by varying the amount of ammonium fluoride-urea and the reaction time. Resultant colloidal N, F codoped TiO 2 nanoparticles show doping dependent shifting of the band edge from the UV to near-IR region, visible light induced generation of reactive oxygen species (ROS), and visible light photodegradation of bisphenol A. A colloidal form of doped TiO 2 nanoparticle offers labeling of cells, visible light induced ROS generation inside a cell, and successive cell death. This work shows the potential advantage of anisotropic nanoparticle precursor for tunable doping and colloidal form of N, F codoped TiO 2 nanoparticle as a visible light photocatalyst.

  6. Effect of Furan Fatty Acids and 3-Methyl-2,4-nonanedione on Light-Induced Off-Odor in Soybean Oil.

    Science.gov (United States)

    Sano, Takashi; Okabe, Ryo; Iwahashi, Maiko; Imagi, Jun; Sato, Toshiro; Yamashita, Toshiyuki; Fukusaki, Eiichiro; Bamba, Takeshi

    2017-03-15

    Soybean oil is one of the most widely consumed vegetable oils. However, under photooxidative conditions, this oil develops a beany and green off-odor through a mechanism that has not yet been elucidated. Upon photooxidation, 3-methyl-2,4-nonanedione (3-MND) produces a strong aroma. In this study, the effect of furan fatty acids and 3-MND on odor reversion in soybean oil was investigated. Our findings suggest that the observed light-induced off-odor was likely attributable to the furan fatty acids present in the oil through the generation of 3-MND. While 3-MND may not be directly responsible for the development of light-induced off-odor, this compound appears to be involved because off-odor was detected in canola oil samples containing added 3-MND. In addition, in the present work, 3-hydroxy-3-methyl-2,4-nonanedione, which is derived from 3-MND, was identified for the first time in light-exposed soybean oil and shown to be one of the compounds responsible for odor reversion.

  7. Light-induced short-term adaptation mechanisms under redox control in the PS II-LHCII supercomplex: LHC II state transitions and PS II repair cycle

    Science.gov (United States)

    Kruse, Olaf

    2001-05-01

    Oxygenic photosynthesis takes place in the thylakoid membranes of cyanobacteria, algae and higher plants. While cyanobacteria have adapted to relatively constant environments, higher plants had to evolve mechanisms to adapt to continuous environmental changes. These include changes in light intensity, temperature and availability of water. One of the great challenges in plant cell biology is therefore to determine the regulatory mechanisms employed by higher plants and some algae to adapt to these constant environmental changes. The particular emphasis of this review is the description and characterisation of light-induced redox-controlled processes regulating the photosynthetic reactions, which involves maintaining maximal electron transport flow through the PS II-Cytb6f-PS I-FoF1ATPase electron transport chain and minimising light-induced oxidative damage to PS II which drives the highly oxidising water-splitting reaction. Two of the mechanisms involved in such short-term regulation processes are known as light harvesting complex II (LHC II) state transitions and photosystem II (PS II) repair cycle. They are followed by, and indeed may be a precondition in order to establish, the onset of the subsequent long-term mechanisms of regulation. In particular, the redox control of LHC II state transitions by reversible phosphorylation has been in the focus of many investigations, leading to many new results demonstrating the complexity of thylakoid-associated redox control mechanisms.

  8. Protective Effect of Fucoxanthin Isolated from Laminaria japonica against Visible Light-Induced Retinal Damage Both in Vitro and in Vivo.

    Science.gov (United States)

    Liu, Yixiang; Liu, Meng; Zhang, Xichun; Chen, Qingchou; Chen, Haixiu; Sun, Lechang; Liu, Guangming

    2016-01-20

    With increasingly serious eye exposure to light stresses, such as light-emitting diodes, computers, and widescreen mobile phones, efficient natural compounds for preventing visible light-induced retinal damages are becoming compelling needs in the modern society. Fucoxanthin, as the main light absorption system in marine algae, may possess an outstanding bioactivity in vision protection because of its filtration of blue light and excellent antioxidative activity. In this work, both in vitro and in vivo simulated visible light-induced retinal damage models were employed. The in vitro results revealed that fucoxanthin exhibited better bioactivities than lutein, zeaxanthin, and blueberry anthocyanins in inhibiting overexpression of vascular endothelial growth factor, resisting senescence, improving phagocytic function, and clearing intracellular reactive oxygen species in retinal pigment epithelium cells. The in vivo experiment also confirmed the superiority of fucoxanthin than lutein in protecting retina against photoinduced damage. This excellent bioactivity may be attributed to its unique structural features, including allenic, epoxide, and acetyl groups. Fucoxanthin is expected to be an important ocular nutrient in the future.

  9. Biomimetic self-assembly of apatite hybrid materials: from a single molecular template to bi-/multi-molecular templates.

    Science.gov (United States)

    Ma, Jun; Wang, Jianglin; Ai, Xin; Zhang, Shengmin

    2014-01-01

    The self-assembly of apatite and proteins is a critical process to induce the formation of the bones and teeth in vertebrates. Although hierarchical structures and biomineralization mechanisms of the mineralized tissues have been intensively studied, most researches focus on the self-assembly biomimetic route using one single-molecular template, while the natural bone is an outcome of a multi-molecular template co-assembly process. Inspired by such a mechanism in nature, a novel strategy based on multi-molecular template co-assembly for fabricating bone-like hybrid materials was firstly proposed by the authors. In this review article we have summarized the new trends from single-molecular template to bi-/multi-molecular template systems in biomimetic fabrication of apatite hybrid materials. So far, many novel apatite hybrid materials with controlled morphologies and hierarchical structures have been successfully achieved using bi-/multi-molecular template strategy, and are found to have multiple common features in comparison with natural mineralized tissues. The carboxyl, carbonyl and amino groups of the template molecules are identified to initiate the nucleation of calcium phosphate during the assembling process. For bi-/multi-molecular templates, the incorporation of multiple promotion sites for calcium and phosphate ions precisely enables to regulate the apatite nucleation from the early stage. The roles of acidic molecules and the synergetic effects of protein templates have been significantly recognized in recent studies. In addition, a specific attention is paid to self-assembling of apatite nanoparticles into ordered structures on tissue regenerative scaffolds due to their promising clinical applications ranging from implant grafts, coatings to drug and gene delivery. Copyright © 2013 Elsevier Inc. All rights reserved.

  10. Accelerator and radiation physics

    CERN Document Server

    Basu, Samita; Nandy, Maitreyee

    2013-01-01

    "Accelerator and radiation physics" encompasses radiation shielding design and strategies for hadron therapy accelerators, neutron facilities and laser based accelerators. A fascinating article describes detailed transport theory and its application to radiation transport. Detailed information on planning and design of a very high energy proton accelerator can be obtained from the article on radiological safety of J-PARC. Besides safety for proton accelerators, the book provides information on radiological safety issues for electron synchrotron and prevention and preparedness for radiological emergencies. Different methods for neutron dosimetry including LET based monitoring, time of flight spectrometry, track detectors are documented alongwith newly measured experimental data on radiation interaction with dyes, polymers, bones and other materials. Design of deuteron accelerator, shielding in beam line hutches in synchrotron and 14 MeV neutron generator, various radiation detection methods, their characteriza...

  11. Nonparaxial accelerating Talbot effect

    CERN Document Server

    Zhang, Yiqi; Belić, Milivoj R; Li, Changbiao; Zhang, Zhaoyang; Wen, Feng; Zhang, Yanpeng; Xiao, Min

    2016-01-01

    We demonstrate the Talbot effect of nonpraxial accelerating beams, theoretically and numerically. It is based on the interference of nonparaxial accelerating solutions of the Helmholtz equation in two dimensions. The effect originates from the interference of such solutions that accelerate along concentric semicircular trajectories with different radii. The Talbot images form along certain central angles, which are referred to as the Talbot angles. These angles are inversely proportional to the radial differences between the nearest beams, which are equal and fixed. A single nonparaxial accelerating beam possesses duality - it can be viewed as a Talbot effect of itself with an infinite or zero Talbot angle. By choosing the coefficient for each beam component properly, we also obtain the fractional nonparaxial accelerating Talbot effect. These results improve the understanding of nonparaxial accelerating beams and the Talbot effect among them.

  12. Accelerator reliability workshop

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D

    2002-07-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.

  13. Miniaturization Techniques for Accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, James E.

    2003-05-27

    The possibility of laser driven accelerators [1] suggests the need for new structures based on micromachining and integrated circuit technology because of the comparable scales. Thus, we are exploring fully integrated structures including sources, optics (for both light and particle) and acceleration in a common format--an accelerator-on-chip (AOC). Tests suggest a number of preferred materials and techniques but no technical or fundamental roadblocks at scales of order 1 {micro}m or larger.

  14. Power Converters for Accelerators

    CERN Document Server

    Visintini, R.

    2015-06-15

    Particle accelerators use a great variety of power converters for energizing their sub-systems; while the total number of power converters usually depends on the size of the accelerator or combination of accelerators (including the experimental setup), the characteristics of power converters depend on their loads and on the particle physics requirements: this paper aims to provide an overview of the magnet power converters in use in several facilities worldwide.

  15. Improving your target-template alignment with MODalign.

    KAUST Repository

    Barbato, Alessandro

    2012-02-04

    SUMMARY: MODalign is an interactive web-based tool aimed at helping protein structure modelers to inspect and manually modify the alignment between the sequences of a target protein and of its template(s). It interactively computes, displays and, upon modification of the target-template alignment, updates the multiple sequence alignments of the two protein families, their conservation score, secondary structure and solvent accessibility values, and local quality scores of the implied three-dimensional model(s). Although it has been designed to simplify the target-template alignment step in modeling, it is suitable for all cases where a sequence alignment needs to be inspected in the context of other biological information. AVAILABILITY AND IMPLEMENTATION: Freely available on the web at http://modorama.biocomputing.it/modalign. Website implemented in HTML and JavaScript with all major browsers supported. CONTACT: jan.kosinski@uniroma1.it.

  16. Template-Framework Interactions in Tetraethylammonium-Directed Zeolite Synthesis

    NARCIS (Netherlands)

    Schmidt, Joel E.; Fu, Donglong; Deem, Michael W.; Weckhuysen, Bert M.

    2016-01-01

    Zeolites, having widespread applications in chemical industries, are often synthesized using organic templates. These can be cost-prohibitive, motivating investigations into their role in promoting crystallization. Herein, the relationship between framework structure, chemical composition, synthesis

  17. CT Study of Radiopaque Implant Template for Gingival Form

    National Research Council Canada - National Science Library

    Tsutsumi, Toyoshige

    2012-01-01

    .... The concentrations of barium sulfate were 0, 5, 10, 15, 20, 25 vol%. The CT template were replaced the porcine mandibule and was fixed by immersion in a water vessel using a phantom before cone beam CT examination...

  18. Ground Water Rule - Boil Water Advisory - Public Notification Template

    Science.gov (United States)

    The Ground Water Rule - Boil Water Advisory - Public Notification Template can be use to issue a Tier 1 Public Notification when it has been determined that source ground water is contaminated with E. Coli bacteria.

  19. GPP Webinar: Solar Procurement Templates and Tools for Higher Education

    Science.gov (United States)

    Green Power Partnership webinar on solar procurement for Higher Education which features various tools and templates that schools can use to shape and manage the solar procurement process to a successful outcome.

  20. Dental rehabilitation of amelogenesis imperfecta using thermoformed templates

    Directory of Open Access Journals (Sweden)

    SNMP Sockalingam

    2011-01-01

    Full Text Available Amelogenesis imperfecta represents a group of dental developmental conditions that are genomic in origin. Hypoplastic AI, hypomineralised AI or both in combination were the most common types seen clinically. This paper describes oral rehabilitation of a 9-year-old Malay girl with inherited hypoplastic AI using transparent thermoforming templates. The defective surface areas were reconstructed to their original dimensions on stone cast models of the upper and lower arches using composite, and transparent thermoform templates were fabricated on the models. The templates were used as crown formers to reconstruct the defective teeth clinically using esthetically matching composite. The usage of the templates allowed direct light curing of the composite, accurate reproducibility of the anatomic contours of the defective teeth, reduced chair-side time and easy contouring and placement of homogenous thickness of composite in otherwise inaccessible sites of the affected teeth.

  1. Template matching techniques in computer vision theory and practice

    CERN Document Server

    Brunelli, Roberto

    2009-01-01

    The detection and recognition of objects in images is a key research topic in the computer vision community.  Within this area, face recognition and interpretation has attracted increasing attention owing to the possibility of unveiling human perception mechanisms, and for the development of practical biometric systems. This book and the accompanying website, focus on template matching, a subset of object recognition techniques of wide applicability, which has proved to be particularly effective for face recognition applications. Using examples from face processing tasks throughout the book to illustrate more general object recognition approaches, Roberto Brunelli: examines the basics of digital image formation, highlighting points critical to the task of template matching;presents basic and  advanced template matching techniques, targeting grey-level images, shapes and point sets;discusses recent pattern classification paradigms from a template matching perspective;illustrates the development of a real fac...

  2. The Address on Umueri Airport City Project: A Template for ...

    African Journals Online (AJOL)

    ; and (3) a template that governors of other States, especially those who are obviously not performing effectively, should adopt and adapt towards efficiency and effectiveness in leadership and governance at the subnational level of Nigeria.

  3. A Survey On Various Web Template Detection And Extraction Methods

    Directory of Open Access Journals (Sweden)

    Neethu Mary Varghese

    2015-03-01

    Full Text Available Abstract In todays digital world reliance on the World Wide Web as a source of information is extensive. Users increasingly rely on web based search engines to provide accurate search results on a wide range of topics that interest them. The search engines in turn parse the vast repository of web pages searching for relevant information. However majority of web portals are designed using web templates which are designed to provide consistent look and feel to end users. The presence of these templates however can influence search results leading to inaccurate results being delivered to the users. Therefore to improve the accuracy and reliability of search results identification and removal of web templates from the actual content is essential. A wide range of approaches are commonly employed to achieve this and this paper focuses on the study of the various approaches of template detection and extraction that can be applied across homogenous as well as heterogeneous web pages.

  4. Ordered Nanomaterials Thin Films via Supported Anodized Alumina Templates

    Directory of Open Access Journals (Sweden)

    Mohammed eES-SOUNI

    2014-10-01

    Full Text Available Supported anodized alumina template films with highly ordered porosity are best suited for fabricating large area ordered nanostructures with tunable dimensions and aspect ratios. In this paper we first discuss important issues for the generation of such templates, including required properties of the Al/Ti/Au/Ti thin film heterostructure on a substrate for high quality templates. We then show examples of anisotropic nanostructure films consisting of noble metals using these templates, discuss briefly their optical properties and their applications to molecular detection using surface enhanced Raman spectroscopy. Finally we briefly address the possibility to make nanocomposite films, exemplary shown on a plasmonic-thermochromic nanocomposite of VO2-capped Au-nanorods.

  5. High Gradient Accelerator Research

    Energy Technology Data Exchange (ETDEWEB)

    Temkin, Richard [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States). Dept. of Physics. Plasma Science and Fusion Center

    2016-07-12

    The goal of the MIT program of research on high gradient acceleration is the development of advanced acceleration concepts that lead to a practical and affordable next generation linear collider at the TeV energy level. Other applications, which are more near-term, include accelerators for materials processing; medicine; defense; mining; security; and inspection. The specific goals of the MIT program are: • Pioneering theoretical research on advanced structures for high gradient acceleration, including photonic structures and metamaterial structures; evaluation of the wakefields in these advanced structures • Experimental research to demonstrate the properties of advanced structures both in low-power microwave cold test and high-power, high-gradient test at megawatt power levels • Experimental research on microwave breakdown at high gradient including studies of breakdown phenomena induced by RF electric fields and RF magnetic fields; development of new diagnostics of the breakdown process • Theoretical research on the physics and engineering features of RF vacuum breakdown • Maintaining and improving the Haimson / MIT 17 GHz accelerator, the highest frequency operational accelerator in the world, a unique facility for accelerator research • Providing the Haimson / MIT 17 GHz accelerator facility as a facility for outside users • Active participation in the US DOE program of High Gradient Collaboration, including joint work with SLAC and with Los Alamos National Laboratory; participation of MIT students in research at the national laboratories • Training the next generation of Ph. D. students in the field of accelerator physics.

  6. Accelerator Review Report 2014

    OpenAIRE

    Tovey, Dan; Appleby, Rob; Bartolini, Riccardo; Bruning, Oliver; Clarke, Jim; Flint, Jonathan; Kilcoyne, Susan H.; Thomason, John; Jamieson, Charlotte; The Accelerator Science and Technology Centre (ASTeC); The Cockcroft Institute (CI); The John Adams Institute for Accelerator Science (JAI)

    2014-01-01

    The panel was created to review the accelerator programme and provide information on the breadth and scope of the STFC’s current accelerator R&D portfolio. The review’s prime driver is to underpin the development of the STFC accelerator landscape and strategy. The panel’s report will go to SB for comment and development of a high-level accelerator strategy, taking into account information from parallel reviews on neutron and photon activities. The ASB will then establish a more detailed accel...

  7. III - Template Metaprogramming for massively parallel scientific computing - Templates for Iteration; Thread-level Parallelism

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Large scale scientific computing raises questions on different levels ranging from the fomulation of the problems to the choice of the best algorithms and their implementation for a specific platform. There are similarities in these different topics that can be exploited by modern-style C++ template metaprogramming techniques to produce readable, maintainable and generic code. Traditional low-level code tend to be fast but platform-dependent, and it obfuscates the meaning of the algorithm. On the other hand, object-oriented approach is nice to read, but may come with an inherent performance penalty. These lectures aim to present he basics of the Expression Template (ET) idiom which allows us to keep the object-oriented approach without sacrificing performance. We will in particular show to to enhance ET to include SIMD vectorization. We will then introduce techniques for abstracting iteration, and introduce thread-level parallelism for use in heavy data-centric loads. We will show to to apply these methods i...

  8. II - Template Metaprogramming for Massively Parallel Scientific Computing - Vectorization with Expression Templates

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Large scale scientific computing raises questions on different levels ranging from the fomulation of the problems to the choice of the best algorithms and their implementation for a specific platform. There are similarities in these different topics that can be exploited by modern-style C++ template metaprogramming techniques to produce readable, maintainable and generic code. Traditional low-level code tend to be fast but platform-dependent, and it obfuscates the meaning of the algorithm. On the other hand, object-oriented approach is nice to read, but may come with an inherent performance penalty. These lectures aim to present he basics of the Expression Template (ET) idiom which allows us to keep the object-oriented approach without sacrificing performance. We will in particular show to to enhance ET to include SIMD vectorization. We will then introduce techniques for abstracting iteration, and introduce thread-level parallelism for use in heavy data-centric loads. We will show to to apply these methods i...

  9. Acquiring Common Sense Spatial Knowledge through Implicit Spatial Templates

    OpenAIRE

    Collell, Guillem; Van Gool, Luc; Moens, Marie-Francine

    2017-01-01

    Spatial understanding is a fundamental problem with wide-reaching real-world applications. The representation of spatial knowledge is often modeled with spatial templates, i.e., regions of acceptability of two objects under an explicit spatial relationship (e.g., "on", "below", etc.). In contrast with prior work that restricts spatial templates to explicit spatial prepositions (e.g., "glass on table"), here we extend this concept to implicit spatial language, i.e., those relationships (genera...

  10. A competition-based deformable template for junction extraction

    OpenAIRE

    Cazorla Quevedo, Miguel Ángel; Escolano Ruiz, Francisco; Gallardo López, Domingo; Colomina Pardo, Otto

    1999-01-01

    We propose a deformable template for junction extraction. Our method evolves from the Kona approach. Junction detection is performed in two steps: center detection and wedge extraction. In the first stage, a local filter is used to detect candidates. Then a template deformation method is used to find the optimal number of sections. Comunicación presentada en el VIII Simposium Nacional de Reconocimiento de Formas y Análisis de Imágenes, Bilbao, mayo 1999.

  11. Template directed synthesis of highly organized functional biomimetic silica nanostructures

    OpenAIRE

    Kind, Lucy

    2009-01-01

    Silica is an important mineral in technological and biological applications. Many protocols have been developed for the synthesis of complex silica architectures. Most prominent is the silicification approach, where polymers build up the templates for the revealed polymer/silica structures. The current thesis demonstrates that star-shaped polymers and block copolymers are efficient templates for the fabrication of silica particles with spherical or raspberry-like morphology....

  12. The Affordance Template ROS Package for Robot Task Programming

    Science.gov (United States)

    Hart, Stephen; Dinh, Paul; Hambuchen, Kimberly

    2015-01-01

    This paper introduces the Affordance Template ROS package for quickly programming, adjusting, and executing robot applications in the ROS RViz environment. This package extends the capabilities of RViz interactive markers by allowing an operator to specify multiple end-effector waypoint locations and grasp poses in object-centric coordinate frames and to adjust these waypoints in order to meet the run-time demands of the task (specifically, object scale and location). The Affordance Template package stores task specifications in a robot-agnostic XML description format such that it is trivial to apply a template to a new robot. As such, the Affordance Template package provides a robot-generic ROS tool appropriate for building semi-autonomous, manipulation-based applications. Affordance Templates were developed by the NASA-JSC DARPA Robotics Challenge (DRC) team and have since successfully been deployed on multiple platforms including the NASA Valkyrie and Robonaut 2 humanoids, the University of Texas Dreamer robot and the Willow Garage PR2. In this paper, the specification and implementation of the affordance template package is introduced and demonstrated through examples for wheel (valve) turning, pick-and-place, and drill grasping, evincing its utility and flexibility for a wide variety of robot applications.

  13. Silver nanowires-templated metal oxide for broadband Schottky photodetector

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Malkeshkumar; Kim, Hong-Sik; Kim, Joondong, E-mail: joonkim@inu.ac.kr [Photoelectric and Energy Device Application Lab (PEDAL) and Department of Electrical Engineering, Incheon National University, 119 Academy Rd. Yeonsu, Incheon 406772 (Korea, Republic of); Park, Hyeong-Ho [Applied Device and Material Lab., Device Technology Division, Korea Advanced Nano Fab Center (KANC), Suwon 443270 (Korea, Republic of)

    2016-04-04

    Silver nanowires (AgNWs)-templated transparent metal oxide layer was applied for Si Schottky junction device, which remarked the record fastest photoresponse of 3.4 μs. Self-operating AgNWs-templated Schottky photodetector showed broad wavelength photodetection with high responsivity (42.4 A W{sup −1}) and detectivity (2.75 × 10{sup 15} Jones). AgNWs-templated indium-tin-oxide (ITO) showed band-to-band excitation due to the internal photoemission, resulting in significant carrier collection performances. Functional metal oxide layer was formed by AgNWs-templated from ITO structure. The grown ITO above AgNWs has a cylindrical shape and acts as a thermal protector of AgNWs for high temperature environment without any deformation. We developed thermal stable AgNWs-templated transparent oxide devices and demonstrated the working mechanism of AgNWs-templated Schottky devices. We may propose the high potential of hybrid transparent layer design for various photoelectric applications, including solar cells.

  14. Detection of Cancerous Masses in Mammograms by Template Matching: Optimization of Template Brightness Distribution by Means of Evolutionary Algorithm

    National Research Council Canada - National Science Library

    Bator, Marcin; Nieniewski, Mariusz

    2012-01-01

    .... This optimization is performed by the evolutionary algorithm using an auxiliary mass classifier. Brightness along the radius of the circularly symmetric template is coded indirectly by its second derivative...

  15. Beam Diagnostics for Accelerators

    CERN Document Server

    Koziol, Heribert

    2005-01-01

    This introductory course aims at a reasonably complete coverage of beam diagnostic devices used in linear and circular accelerators and in primary beam lines. The weight is on the concepts and the indication of variants, while for technical details the reader is referred to the literature. The present updated version replaces those from previous General Accelerator Physics Courses.

  16. Accelerators Beyond The Tevatron?

    Energy Technology Data Exchange (ETDEWEB)

    Lach, Joseph; /Fermilab

    2010-07-01

    Following the successful operation of the Fermilab superconducting accelerator three new higher energy accelerators were planned. They were the UNK in the Soviet Union, the LHC in Europe, and the SSC in the United States. All were expected to start producing physics about 1995. They did not. Why?

  17. Asia honours accelerator physicists

    CERN Multimedia

    2010-01-01

    "Steve Meyers of Cern and Jie Wei of Beijing's Tsinghua University are the first recipients of a new prize for particle physics. The pair were honoured for their contributions to numerous particle-accelerator projects - including Cern's Large Hadron Collider - by the Asian Committee for Future Accelerators (ACFA)..." (1 paragraph)

  18. KEK digital accelerator

    Directory of Open Access Journals (Sweden)

    T. Iwashita

    2011-07-01

    Full Text Available The High Energy Accelerator Research Organization KEK digital accelerator (KEK-DA is a renovation of the KEK 500 MeV booster proton synchrotron, which was shut down in 2006. The existing 40 MeV drift tube linac and rf cavities have been replaced by an electron cyclotron resonance (ECR ion source embedded in a 200 kV high-voltage terminal and induction acceleration cells, respectively. A DA is, in principle, capable of accelerating any species of ion in all possible charge states. The KEK-DA is characterized by specific accelerator components such as a permanent magnet X-band ECR ion source, a low-energy transport line, an electrostatic injection kicker, an extraction septum magnet operated in air, combined-function main magnets, and an induction acceleration system. The induction acceleration method, integrating modern pulse power technology and state-of-art digital control, is crucial for the rapid-cycle KEK-DA. The key issues of beam dynamics associated with low-energy injection of heavy ions are beam loss caused by electron capture and stripping as results of the interaction with residual gas molecules and the closed orbit distortion resulting from relatively high remanent fields in the bending magnets. Attractive applications of this accelerator in materials and biological sciences are discussed.

  19. Biotic Control of Surface pH and Evidence of Light-Induced H+ Pumping and Ca2+-H+ Exchange in a Tropical Crustose Coralline Alga.

    Directory of Open Access Journals (Sweden)

    Laurie C Hofmann

    Full Text Available Presently, an incomplete mechanistic understanding of tropical reef macroalgae photosynthesis and calcification restricts predictions of how these important autotrophs will respond to global change. Therefore, we investigated the mechanistic link between inorganic carbon uptake pathways, photosynthesis and calcification in a tropical crustose coralline alga (CCA using microsensors. We measured pH, oxygen (O2, and calcium (Ca2+ dynamics and fluxes at the thallus surface under ambient (8.1 and low (7.8 seawater pH (pHSW and across a range of irradiances. Acetazolamide (AZ was used to inhibit extracellular carbonic anhydrase (CAext, which mediates hydrolysis of HCO3-, and 4,4' diisothiocyanatostilbene-2,2'-disulphonate (DIDS that blocks direct HCO3- uptake by anion exchange transport. Both inhibited photosynthesis, suggesting both diffusive uptake of CO2 via HCO3- hydrolysis to CO2 and direct HCO3- ion transport are important in this CCA. Surface pH was raised approximately 0.3 units at saturating irradiance, but less when CAext was inhibited. Surface pH was lower at pHSW 7.8 than pHSW 8.1 in the dark, but not in the light. The Ca2+ fluxes were large, complex and temporally variable, but revealed net Ca2+ uptake under all conditions. The temporal variability in Ca2+ dynamics was potentially related to localized dissolution during epithallial cell sloughing, a strategy of CCA to remove epiphytes. Simultaneous Ca2+ and pH dynamics suggest the presence of Ca2+/H+ exchange. Rapid light-induced H+ surface dynamics that continued after inhibition of photosynthesis revealed the presence of a light-mediated, but photosynthesis-independent, proton pump. Thus, the study indicates metabolic control of surface pH can occur in CCA through photosynthesis and light-inducible H+ pumps. Our results suggest that complex light-induced ion pumps play an important role in biological processes related to inorganic carbon uptake and calcification in CCA.

  20. Solar light induced removal of arsenic from contaminated groundwater: the interplay of solar energy and chemical variables

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.G.; D' Hiriart, J.; Giullitti, J.; Hidalgo, M. del V. [Universidad Nacional de Tucaman (Argentina). Centro de Investigaciones y Transferencia en Quimica Aplicada; Lin, H.; Custo, G.; Litter, M.I. [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Unidad de Actividad Quimica; Blesa, M.A. [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Unidad de Actividad Quimica; Universidad Nacional de General San Martin (Argentina)

    2004-11-01

    The removal of arsenic by solar oxidation in individual units (SORAS) is currently being explored as a possible economic and simple technology to treat groundwater in Bangladesh and India. Hydroarsenicism affects also large regions of America, especially Argentina, Chile, Mexico and Peru. In this paper, the efficiency of arsenic removal by solar oxidation coupled with precipitation of iron (hydr)oxide, was assessed under various experimental conditions, both on samples of synthetic water and of groundwater of the province of Tucuman (Argentina). The results demonstrate that the underlying chemistry is very complex, and the efficiency is affected often in unpredictable ways by changes in the chemical matrix, or by changes in the operative conditions. Oxides generated from ferrous salts are more efficient than solids formed by hydrolysis of Fe(III); alkalinity contents (bicarbonate) is also important to permit the adequate precipitation. Addition of small amounts of citric acid (lemon juice) is beneficial, but at larger concentrations the effect is negative, probably because of interference in the formation of the solid. The effect of solar irradiation is variable, depending on the other experimental conditions. Although it is possible to remove As partially without solar irradiation under certain special conditions, a procedure versatile enough to cope with waters of different compositions must be based in the use of solar energy. Light plays the role of accelerating the oxidation of As(III) to As(V), and also affects the nature of the solid and, hence, its sorptive properties. The rationale of the effect of light is therefore appreciably more complex than in the case of heterogeneous photocatalysis with TiO{sub 2}. (Author)

  1. PEG-functionalized iron oxide nanoclusters loaded with chlorin e6 for targeted, NIR light induced, photodynamic therapy.

    Science.gov (United States)

    Li, Zhiwei; Wang, Chao; Cheng, Liang; Gong, Hua; Yin, Shengnan; Gong, Qiufang; Li, Yonggang; Liu, Zhuang

    2013-12-01

    Magnetic targeting that utilizes a magnetic field to specifically delivery theranostic agents to targeted tumor regions can greatly improve the cancer treatment efficiency. Herein, we load chlorin e6 (Ce6), a widely used PS molecule in PDT, on polyethylene glycol (PEG) functionalized iron oxide nanoclusters (IONCs), obtaining IONC-PEG-Ce6 as a theranostic agent for dual-mode imaging guided and magnetic-targeting enhanced in vivo PDT. Interestingly, after being loaded on PEGylated IONCs, the absorbance/excitation peak of Ce6 shows an obvious red-shift from ~650 nm to ~700 nm, which locates in the NIR region with improved tissue penetration. Without noticeable dark toxicity, Ce6 loaded IONC-PEG (IONC-PEG-Ce6) exhibits significantly accelerated cellular uptake compared with free Ce6, and thus offers greatly improved in vitro photodynamic cancer cell killing efficiency under a low-power light exposure. After demonstrating the magnetic field (MF) enhanced PDT using IONC-PEG-Ce6, we then further test this concept in animal experiments. Owing to the strong magnetism of IONCs and the long blood-circulation time offered by the condensed PEG coating, IONC-PEG-Ce6 shows strong MF-induced tumor homing ability, as evidenced by in vivo dual modal optical and magnetic resonance (MR) imaging. In vivo PDT experiment based magnetic tumor targeting using IONC-PEG-Ce6 is finally carried out, achieving high therapeutic efficacy with dramatically delayed tumor growth after just a single injection and the MF-enhanced photodynamic treatment. Considering the biodegradability and non-toxicity of iron oxide, our IONC-PEG-Ce6 presented in this work may be a useful multifunctional agent promising in photodynamic cancer treatment under magnetic targeting. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. The Atomki accelerator center

    Science.gov (United States)

    Vajda, I.; Fülöp, Zs.; Biri, S.

    2017-06-01

    Particle accelerators are the driving forces of nuclear physics laboratories and MTA Atomki, the Institute for Nuclear Research of the Hungarian Academy of Sciences is no exception. The Atomki Accelerator Center (AAC) incorporates several low-energy charged-particle accelerators, offering the possibility of choosing ions with various charge states, energies and beam intensities. Currently, the AAC has six main facilities: a cyclotron (K=20), two Van de Graaff accelerators (1 MV, 5 MV), an ECR ion source, an electromagnetic isotope separator and a 2 MV Tandetron installed in 2015. The accelerators, spanning a range of beam energies from 50 eV to 27 MeV, have been designed for a broad range of research projects and applications in various fields - mainly in nuclear and atomic physics, materials science, environmental research and archaeology. The structure of the laboratory with a short description of the most important topics, education and outreach activities are presented.

  3. Visible Light-Induced Oxidative Chlorination of Alkyl sp3 C-H Bonds with NaCl/Oxone at Room Temperature.

    Science.gov (United States)

    Zhao, Mengdi; Lu, Wenjun

    2017-09-01

    A visible light-induced monochlorination of cyclohexane with sodium chloride (5:1) has been successfully accomplished to afford chlorocyclohexane in excellent yield by using Oxone as the oxidant in H2O/CF3CH2OH at room temperature. Other secondary and primary alkyl sp3 C-H bonds of cycloalkanes and functional branch/linear alkanes can also be chlorinated, respectively, under similar conditions. The selection of a suitable organic solvent is crucial in these efficient radical chlorinations of alkanes in two-phase solutions. It is studied further by the achievement of high chemoselectivity in the chlorination of the benzyl sp3 C-H bond or the aryl sp2 C-H bond of toluene.

  4. Application of quantitative light-induced fluorescence to determine the depth of demineralization of dental fluorosis in enamel microabrasion: a case report

    Directory of Open Access Journals (Sweden)

    Tae-Young Park

    2016-08-01

    Full Text Available Enamel microabrasion has become accepted as a conservative, nonrestorative method of removing intrinsic and superficial dysmineralization defects from dental fluorosis, restoring esthetics with minimal loss of enamel. However, it can be difficult to determine if restoration is necessary in dental fluorosis, because the lesion depth is often not easily recognized. This case report presents a method for analysis of enamel hypoplasia that uses quantitative light-induced fluorescence (QLF followed by a combination of enamel microabrasion with carbamide peroxide home bleaching. We describe the utility of QLF when selecting a conservative treatment plan and confirming treatment efficacy. In this case, the treatment plan was based on QLF analysis, and the selected combination treatment of microabrasion and bleaching had good results.

  5. Application of quantitative light-induced fluorescence to determine the depth of demineralization of dental fluorosis in enamel microabrasion: a case report.

    Science.gov (United States)

    Park, Tae-Young; Choi, Han-Sol; Ku, Hee-Won; Kim, Hyun-Su; Lee, Yoo-Jin; Min, Jeong-Bum

    2016-08-01

    Enamel microabrasion has become accepted as a conservative, nonrestorative method of removing intrinsic and superficial dysmineralization defects from dental fluorosis, restoring esthetics with minimal loss of enamel. However, it can be difficult to determine if restoration is necessary in dental fluorosis, because the lesion depth is often not easily recognized. This case report presents a method for analysis of enamel hypoplasia that uses quantitative light-induced fluorescence (QLF) followed by a combination of enamel microabrasion with carbamide peroxide home bleaching. We describe the utility of QLF when selecting a conservative treatment plan and confirming treatment efficacy. In this case, the treatment plan was based on QLF analysis, and the selected combination treatment of microabrasion and bleaching had good results.

  6. In situ visualizing the evolution of the light-induced refractive index change of Mn:KLTN crystal with digital holographic interferometry

    Directory of Open Access Journals (Sweden)

    Jinxin Han

    2015-04-01

    Full Text Available The light-induced refractive index change in Mn:KLTN crystal, illuminated by focused light sheet, is visualized in situ and quantified by digital holographic interferometry. By numerically retrieving a series of sequential phase maps from recording digital holograms, the spatial distribution of the induced refractive index change can be visualized and estimated readily. This technique enables the observation of the temporal evolution of the refractive index change under different recording situations such as writing laser power, applied voltage, and temperature, and the photoconductivity of Mn:KLTN crystal can be calculated as well, the experimental results are in good agreement with the theory. The research results suggest that the presented method is successful and feasible.

  7. Visible-light-induced, Ir-catalyzed reactions of N-methyl-N-((trimethylsilylmethylaniline with cyclic α,β-unsaturated carbonyl compounds

    Directory of Open Access Journals (Sweden)

    Dominik Lenhart

    2014-04-01

    Full Text Available N-Methyl-N-((trimethylsilylmethylaniline was employed as reagent in visible-light-induced, iridium-catalyzed addition reactions to cyclic α,β-unsaturated carbonyl compounds. Typical reaction conditions included the use of one equivalent of the reaction substrate, 1.5 equivalents of the aniline and 2.5 mol % (in MeOH or 1.0 mol % (in CH2Cl2 [Ir(ppy2(dtbbpy]BF4 as the catalyst. Two major reaction products were obtained in combined yields of 30–67%. One product resulted from aminomethyl radical addition, the other product was a tricyclic compound, which is likely formed by attack of the intermediately formed α-carbonyl radical at the phenyl ring. For five-membered α,β-unsaturated lactone and lactam substrates, the latter products were the only products isolated. For the six-membered lactones and lactams and for cyclopentenone the simple addition products prevailed.

  8. Preparation of fluorescein-functionalized electrospun fibers coated with TiO{sub 2} and gold nanoparticles for visible-light-induced photocatalysis

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Won Suk [Department of Chemistry, Hannam University, Daejeon 306-791 (Korea, Republic of); Choi, Insung S. [Department of Chemistry, KAIST, Daejeon 305-701 (Korea, Republic of); Lee, Jungkyu K., E-mail: jkl@knu.ac.kr [Molecular-Level Interface Research Center, Department of Chemistry and Green-Nano Research Center, Kyungpook National University, Daegu 702-701 (Korea, Republic of); Yoon, Kuk Ro, E-mail: kryoon@hannam.ac.kr [Department of Chemistry, Hannam University, Daejeon 306-791 (Korea, Republic of)

    2015-08-01

    We demonstrated a new type of visible light-induced photocatalyst, comprising fluorescein molecules, TiO{sub 2}, and gold nanoparticles anchored onto polymer fibers. The synthesized fiber composite was fully characterized by thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, FT-IR spectroscopy, contact angle measurement, and fluorescence microscopy. Under sunlight and visible light irradiation, the photocatalytic activity of the tricomponent system showed 2–3 times greater photodegradation efficiency for methylene blue than a representative photocatalyst, Degussa P25. - Graphical abstract: PSS/PAH-FITC/TiO{sub 2}/AuNP composite demonstrated 2–3 times greater visible light photodegradation efficiency for methylene blue than a representative photocatalyst, Degussa P25. Display Omitted - Highlights: • Synthesis of a novel composite, polymer fiber/organic dye/TiO{sub 2}/gold nanoparticles. • The composite was characterized by TGA, SEM, TEM, and fluorescence microscopy. • Improved visible light photocatalytic activity of the sythesized novel composite.

  9. The Light-Induced FOS Response in Melanopsin Expressing HEK-293 Cells is Correlated with Melanopsin Quantity and Dependent on Light Duration and Irradiance

    DEFF Research Database (Denmark)

    Georg, Birgitte; Rask, Lene; Hannibal, Jens

    2014-01-01

    after light resulted in reduction of the response compared to exposure to light solely showing dependency on continuous light. Increasing irradiances of blue light (480 nm) up to 10(11) quanta cm(-2) s(-1) elicited steep increases in FOS mRNA, while increases between 10(12) and 5 × 10(13) quanta cm(-2......We established a cell line (HEK-hMel) expressing melanopsin in a tetracycline dependent manner to elucidate new aspects of melanopsin's light response. Different light stimuli were evaluated using FOS expression as response parameter. Immunoblotting was used to evaluate expression of melanopsin......) s(-1) resulted in equally high FOS expression. The HEK-hMel cells were used to characterize facets of melanopsin's light-induced FOS response not approachable in vivo. Novel information such as dependency of the FOS response on both melanopsin amount and light intensity in addition to a detailed...

  10. Enhancing the visible-light-induced photocatalytic activity of the self-cleaning TiO{sub 2}-coated cotton by loading Ag/AgCl nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Deyong, E-mail: wdy001815@126.com; Wang, Lianzhi; Song, Xinjian, E-mail: whxjsong@163.com; Tan, Yuanbin

    2013-07-01

    TiO{sub 2}-coated cotton possesses excellent self-cleaning properties but requires ultraviolet irradiation for effective photocatalysis. It is highly desirable to develop self-cleaning cotton fabrics that can use visible light in high efficiency under sunlight irradiation. In this work, Ag/AgCl-TiO{sub 2}-cotton was prepared by coating TiO{sub 2} films at low temperature and then loading Ag/AgCl nanoparticles via an impregnating precipitation photoreduction method. It was characterized by meanings of scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-visible diffuse reflectance spectrophotometer. In comparison with TiO{sub 2}-cotton, Ag/AgCl-TiO{sub 2}-cotton exhibits a highly visible-light-induced photocatalytic activity for degradation of methyl orange in water. The mechanism for the degradation of methyl orange over the Ag/AgCl-TiO{sub 2}-cotton was discussed. Under visible light irradiation, Ag NPs are photoexcited due to surface plasmon resonance, and then the photoexcited electrons from Ag NPs inject into the TiO{sub 2} conduction band and the holes transfer to the surface of the AgCl particles. The produced radical groups, such as O{sub 2}• {sup −}, H{sub 2}O{sub 2}, • OH and Cl{sup 0}, can cause the photocatalytic degradation of organic pollutants. - Highlights: • TiO{sub 2} was coated on the substrates with low thermal resistance. • Ag/AgCl-TiO{sub 2}-cotton shows visible-light-induced self-cleaning property. • Silver nanoparticles lead to surface plasmon resonance absorption.

  11. Physiological crosstalk between the AC/PKA and PLC/PKC pathways modulates melatonin-mediated, monochromatic-light-induced proliferation of T-lymphocytes in chickens.

    Science.gov (United States)

    Guo, Qingyun; Wang, Zixu; Dong, Yulan; Cao, Jing; Chen, Yaoxing

    2017-06-28

    Previous study has demonstrated that melatonin plays a critical role in monochromatic-light-induced lymphocyte proliferation in response to T cell mitogen concanavalin A (ConA). However, its intracellular mechanism is still unclear. In this study, we investigate the intracellular signal pathways of melatonin receptor-mediated T-lymphocyte proliferation in the spleens of chicks exposed to different light wavelengths. Results showed that green light enhanced T-lymphocyte proliferation by 2.46-6.83% and increased splenic mRNA and protein expressions of melatonin receptor subtypes (Mel1a, Mel1b and Mel1c) by 16.05-40.43% compared with the white, red and blue light groups. However, pinealectomy resulted in a decrease in T-lymphocyte proliferation and melatonin receptor expression with no statistically significant differences between the different light groups. In vitro experiments showed that the Mel1b selective antagonist 4P-PDOT, the Mel1c selective antagonist prazosin and the mitogen-activated protein kinase kinase-1 (MEK-1) inhibitor PD98059 suppressed both melatonin-induced lymphocyte proliferation in response to ConA and melatonin- and ConA-stimulated extracellular signal-regulated kinase 1/2 (ERK1/2) activity but that the Mel1a/Mel1b non-selective antagonist luzindole did not. In addition, pretreatment with forskolin (FSK, the adenylyl cyclase activator), H89 (the PKA inhibitor), U73122 (the PLC inhibitor) or Go6983 (the broad spectrum PKC inhibitor) markedly attenuated melatonin- and ConA-stimulated T-lymphocyte proliferation and ERK1/2 activity. These results demonstrate that melatonin mediates green-light-induced T-lymphocyte proliferation via the Mel1b and Mel1c receptors by triggering crosstalk between the cAMP/PKA and PLC/PKC signal pathways followed by ERK1/2 activation.

  12. Effect of Organic Solvents and Biologically Relevant Ions on the Light-Induced DNA Cleavage by Pyrene and Its Amino and Hydroxy Derivatives

    Directory of Open Access Journals (Sweden)

    Hongtao Yu

    2002-09-01

    Full Text Available Abstract: Polycyclic aromatic hydrocarbons (PAHs are a class of carcinogenic compounds that are both naturally and artificially produced. Many PAHs are pro-carcinogens that require metabolic activation. Recently, it has been shown that PAH can induce DNA single strand cleavage and formation of PAH-DNA covalent adduct upon irradiation with UVA light. The light-induced DNA cleavage parallels phototoxicity in one instance. The DNA photocleavage efficiency depends on the structure of the PAHs. This article reports the effect of both organic solvents and the presence of biologically relevant ions, Na+, Mg2+, Ca2+, K+, Fe3+, Cu2+, Zn+2, Mn2+, and I-, on the light-induced DNA cleavage by pyrene, 1-hydroxypyrene and 1-aminopyrene. Since both 1-hydroxypyrene (0.6 μM and 1-aminopyrene (6 μM dissolve well in the minimum organic solvents used (2% methanol, dimethylsulfoxide, and dimethylformamide, increasing the amount of the organic solvent resulted in the decrease of the amount of DNA single strand cleavage caused by the combination effect of 1-hydroxy or 1-aminopyrene and UVA light. The result with the less watersoluble pyrene shows that increase of the amount of the organic solvent can increase the amount of DNA single strand DNA photocleavage cause by the combination of pyrene and UVA light. Therefore, there are two effects by the organic solvents: (i to dissolve PAH and (ii to quench DNA photocleavage. The presence of Fe3+ and Zn2+ enhances, while the presence of Ca2+ and Mn2+ inhibits the DNA photocleavage caused by 1-aminopyrene and UVA light. Other metal ions have minimal effect. This means that the effect of ions on DNA photocleavage by PAHs is complex. The presence of KI enhances DNA photocleavage. This indicates that the triplet-excited state of 1-aminopyrene is involved in causing DNA cleavage

  13. The miniature accelerator

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    The image that most people have of CERN is of its enormous accelerators and their capacity to accelerate particles to extremely high energies. But thanks to some cutting-edge studies on beam dynamics and radiofrequency technology, along with innovative construction techniques, teams at CERN have now created the first module of a brand-new accelerator, which will be just 2 metres long. The potential uses of this miniature accelerator will include deployment in hospitals for the production of medical isotopes and the treatment of cancer. It’s a real David-and-Goliath story.   Serge Mathot, in charge of the construction of the "mini-RFQ", pictured with the first of the four modules that will make up the miniature accelerator. The miniature accelerator consists of a radiofrequency quadrupole (RFQ), a component found at the start of all proton accelerator chains around the world, from the smallest to the largest. The LHC is designed to produce very high-intensity beams ...

  14. Multicavity proton cyclotron accelerator

    Directory of Open Access Journals (Sweden)

    J. L. Hirshfield

    2002-08-01

    Full Text Available A mechanism for acceleration of protons is described, in which energy gain occurs near cyclotron resonance as protons drift through a sequence of rotating-mode TE_{111} cylindrical cavities in a strong nearly uniform axial magnetic field. Cavity resonance frequencies decrease in sequence from one another with a fixed frequency interval Δf between cavities, so that synchronism can be maintained between the rf fields and proton bunches injected at intervals of 1/Δf. An example is presented in which a 122 mA, 1 MeV proton beam is accelerated to 961 MeV using a cascade of eight cavities in an 8.1 T magnetic field, with the first cavity resonant at 120 MHz and with Δf=8 MHz. Average acceleration gradient exceeds 40 MV/m, average effective shunt impedance is 223 MΩ/m, but maximum surface field in the cavities does not exceed 7.2 MV/m. These features occur because protons make many orbital turns in each cavity and thus experience acceleration from each cavity field many times. Longitudinal and transverse stability appear to be intrinsic properties of the acceleration mechanism, and an example to illustrate this is presented. This acceleration concept could be developed into a proton accelerator for a high-power neutron spallation source, such as that required for transmutation of nuclear waste or driving a subcritical fission burner, provided a number of significant practical issues can be addressed.

  15. "Bis-Click" Ligation of DNA: Template-Controlled Assembly, Circularisation and Functionalisation with Bifunctional and Trifunctional Azides.

    Science.gov (United States)

    Yang, Haozhe; Seela, Frank

    2017-03-08

    Ligation and circularisation of oligonucleotides containing terminal triple bonds was performed with bifunctional or trifunctional azides. Both reactions are high yielding. Template-assisted bis-click ligation of two individual non-complementary oligonucleotide strands was accomplished to yield heterodimers exclusively. In this context, the template fulfils two functions: it accelerates the ligation reaction and controls product assembly (heterodimer vs. homodimer formation). Intermolecular bis-click circularisation of one oligonucleotide strand took place without template assistance. For construction of oligonucleotides with terminal triple bonds in the nucleobase side chain, 7- or 5-functionalised 7-deaza-dA and dU residues were used. These oligonucleotides are directly accessible by solid-phase synthesis. When trifunctional azides were employed instead of bifunctional linkers, functionalisation of the remaining azido group was performed with small molecules such as 1-ethynyl pyrene, biotin propargyl amide or with ethynylated oligonucleotides. By this means, branched DNA was constructed. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Direct Laser Acceleration in Laser Wakefield Accelerators

    Science.gov (United States)

    Shaw, J. L.; Froula, D. H.; Marsh, K. A.; Joshi, C.; Lemos, N.

    2017-10-01

    The direct laser acceleration (DLA) of electrons in a laser wakefield accelerator (LWFA) has been investigated. We show that when there is a significant overlap between the drive laser and the trapped electrons in a LWFA cavity, the accelerating electrons can gain energy from the DLA mechanism in addition to LWFA. The properties of the electron beams produced in a LWFA, where the electrons are injected by ionization injection, have been investigated using particle-in-cell (PIC) code simulations. Particle tracking was used to demonstrate the presence of DLA in LWFA. Further PIC simulations comparing LWFA with and without DLA show that the presence of DLA can lead to electron beams that have maximum energies that exceed the estimates given by the theory for the ideal blowout regime. The magnitude of the contribution of DLA to the energy gained by the electron was found to be on the order of the LWFA contribution. The presence of DLA in a LWFA can also lead to enhanced betatron oscillation amplitudes and increased divergence in the direction of the laser polarization. This material is based upon work supported by the Department of Energy National Nuclear Security Administration under Award Number DE-NA0001944.

  17. RF linear accelerators

    CERN Document Server

    Wangler, Thomas P

    2008-01-01

    Thomas P. Wangler received his B.S. degree in physics from Michigan State University, and his Ph.D. degree in physics and astronomy from the University of Wisconsin. After postdoctoral appointments at the University of Wisconsin and Brookhaven National Laboratory, he joined the staff of Argonne National Laboratory in 1966, working in the fields of experimental high-energy physics and accelerator physics. He joined the Accelerator Technology Division at Los Alamos National Laboratory in 1979, where he specialized in high-current beam physics and linear accelerator design and technology. In 2007

  18. Confronting Twin Paradox Acceleration

    Science.gov (United States)

    Murphy, Thomas W.

    2016-05-01

    The resolution to the classic twin paradox in special relativity rests on the asymmetry of acceleration. Yet most students are not exposed to a satisfactory analysis of what exactly happens during the acceleration phase that results in the nonaccelerated observer's more rapid aging. The simple treatment presented here offers both graphical and quantitative solutions to the problem, leading to the correct result that the acceleration-induced age gap is 2Lβ years when the one-way distance L is expressed in light-years and velocity β ≡v/c .

  19. Accelerator Production of Radionuclides

    Science.gov (United States)

    Schlyer, David J.; Ruth, Thomas J.

    2012-06-01

    While many radioactive isotopes in use today are found in nature, many more are artificially produced by irradiating target materials with nuclear particles. Two different technologies can provide the energetic particles needed: nuclear reactors, which produce a flux of neutrons, and particle accelerators, which produce a flux of charged particles. This chapter will deal with the important aspects of the production of radionuclides with accelerators, along with some details on their applications, commercially-available accelerator systems used for this purpose, and the size of the equipment business.

  20. Templated hydrogels for combination devices: therapeutic contact lenses.

    Science.gov (United States)

    Ali, Maryam; Vaughan, Asa D; Zhang, Jeney; Venkatesh, Sid; Byrne, Mark E

    2009-01-01

    Molecular imprinting provides a rational design strategy for the development of controlled release drug delivery systems. We demonstrate that imprinting a network results in macromolecular memory for the template molecule, indicated by the two or more times greater partitioning into these networks as compared to non-imprinted networks. Partitioning of drug into networks synthesized from multiple functional monomers was 8 times greater than networks synthesized from single monomers. One-dimensional permeation studies showed that the gel with maximum incorporated chemical functionality had the lowest diffusion coefficient, which was at least an order of magnitude lower than all other gels studied. All imprinted networks had significantly lower diffusion coefficients than non-imprinted networks, in spite of comparable mesh sizes and equilibrium polymer volume fractions in the swollen state. This work also demonstrates molecular imprinting using a "living/controlled" polymerization strategy to enhance template loading/affinity and delay release in weakly crosslinked gels. Recognition studies revealed more than a 50% increase in template loading and dynamic template release studies showed that imprinting via "living" polymerization extends or delays the template release profile by two-fold over that of imprinting via conventional free-radical polymerization techniques and four-fold over the control network. The imprinted gel and imprinted gel prepared via "living/controlled" polymerization release profiles were less Fickian and moved toward zero-order release with profile coefficients of 0.68 and 0.70, respectively.

  1. Attempted nonenzymatic template-directed oligomerizations on a polyadenylic acid template: implications for the nature of the first genetic material

    Science.gov (United States)

    Stribling, R.; Miller, S. L.

    1991-01-01

    Previous attempts to produce nonenzymatic template-directed oligomerizations of activated pyrimidines on polypurine templates have been unsuccessful. The only efficient reactions are those where the template is composed primarily of pyrimidines, especially cytosine. Because molecular evolution requires that a synthesized daughter polynucleotide be capable of acting as a template for the synthesis of the original polynucleotide, the one-way replication achieved thus far is inadequate to initiate an evolving system. Several uracil analogs were used in this investigation in order to search for possible replacements for uracil. The monomers used in this investigation were the imidazolides of UMP, xanthosine 5'-monophosphate, the bis-monophosphates of the acyclic nucleosides of uracil, and 2,4-quinazolinedione. The concentrations of various salts, buffers, pH, and temperature were among the different variables investigated in attempts to find conditions that would permit template-directed oligomerizations. Although the different monomers in this study demonstrated varying abilities to form very short oligomers, we were unable to detect any enhancement of this oligomerization that could be attributed to the poly(A) template. Although special conditions might be found that would allow purine-rich templates to work, these reactions cannot be considered robust. The results of our experiments suggest that pyrimidines were not part of the original replicating system on the primitive Earth. It has already been shown that ribose is an unlikely component of the first replicating systems, and we now suggest that phosphate was absent as well. This is due to the low solubility of phosphate in the present ocean (3 x 10(-6) M), as well as the difficulty of prebiotic activation of phosphates.

  2. Non-accelerator experiments

    Energy Technology Data Exchange (ETDEWEB)

    Goldhaber, M.

    1986-01-01

    This report discusses several topics which can be investigated without the use of accelerators. Topics covered are: (1) proton decay, (2) atmospheric neutrinos, (3) neutrino detection, (4) muons from Cygnus X-3, and (5) the double-beta decay.

  3. Macromolecular ion accelerator.

    Science.gov (United States)

    Hsu, Yun-Fei; Lin, Jung-Lee; Lai, Szu-Hsueh; Chu, Ming-Lee; Wang, Yi-Sheng; Chen, Chung-Hsuan

    2012-07-03

    Presented herein are the development of macromolecular ion accelerator (MIA) and the results obtained by MIA. This new instrument utilizes a consecutive series of planar electrodes for the purpose of facilitating stepwise acceleration. Matrix-assisted laser desorption/ionization (MALDI) is employed to generate singly charged macromolecular ions. A regular Z-gap microchannel plate (MCP) detector is mounted at the end of the accelerator to record the ion signals. In this work, we demonstrated the detection of ions with the mass-to-charge (m/z) ratio reaching 30,000,000. Moreover, we showed that singly charged biomolecular ions can be accelerated with the voltage approaching 1 MV, offering the evidence that macromolecular ions can possess much higher kinetic energy than ever before.

  4. The next big accelerator

    CERN Multimedia

    Cramer, J G

    2002-01-01

    Accelerator physics in the US has been devastated by the cancellation of two high-energy physics colliders facilities. However there are future plans. A suggestion is made to build the new collider in the Australian outback.

  5. Accelerated learning in Afghanistan

    Directory of Open Access Journals (Sweden)

    Christine Capacci Carneal

    2005-01-01

    Full Text Available Most accelerated learning (AL programmes are ‘catch up’ initiatives to assist out-of-school youth into formal education. But what happens when adults join and complete AL classes?

  6. DIELECTRIC WALL ACCELERATOR TECHNOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Sampayan, S; Caporaso, G; Chen, Y; Harris, J; Hawkins, S; Holmes, C; Nelson, S; Poole, B; Rhodes, M; Sanders, D; Sullivan, J; Wang, L; Watson, J

    2007-10-18

    The dielectric wall accelerator (DWA) is a compact pulsed power device where the pulse forming lines, switching, and vacuum wall are integrated into a single compact geometry. For this effort, we initiated a extensive compact pulsed power development program and have pursued the study of switching (gas, oil, laser induced surface flashover and photoconductive), dielectrics (ceramics and nanoparticle composites), pulse forming line topologies (asymmetric and symmetric Blumleins and zero integral pulse forming lines), and multilayered vacuum insulator (HGI) technology. Finally, we fabricated an accelerator cell for test on ETAII (a 5.5 MeV, 2 kA, 70 ns pulsewidth electron beam accelerator). We review our past results and report on the progress of accelerator cell testing.

  7. Rejuvenating CERN's Accelerators

    CERN Multimedia

    2004-01-01

    In the coming years and especially in 2005, CERN's accelerators are going to receive an extensive renovation programme to ensure they will perform reliably and effectively when the LHC comes into service.

  8. SPS accelerating cavity

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    View towards the downstream end of one of the SPS accelerating cavities (200 MHz, travelling wave structure). See 7603195 and 8011289 for more details, 7411032 for the travelling wave structure, and also 8104138.

  9. Linear Accelerator (LINAC)

    Science.gov (United States)

    ... View full size with caption Related Articles and Media External Beam Therapy (EBT) Intensity-Modulated Radiation Therapy (IMRT) Image-guided Radiation Therapy (IGRT) Stereotactic Radiosurgery (SRS) and Stereotactic Body Radiotherapy (SBRT) Images related to Linear Accelerator Sponsored ...

  10. Joint International Accelerator School

    CERN Multimedia

    CERN Accelerator School

    2014-01-01

    The CERN and US Particle Accelerator Schools recently organised a Joint International Accelerator School on Beam Loss and Accelerator Protection, held at the Hyatt Regency Hotel, Newport Beach, California, USA from 5-14 November 2014. This Joint School was the 13th in a series of such schools, which started in 1985 and also involves the accelerator communities in Japan and Russia.   Photo courtesy of Alfonse Pham, Michigan State University.   The school attracted 58 participants representing 22 different nationalities, with around half from Europe and the other half from Asia and the Americas. The programme comprised 26 lectures, each of 90 minutes, and 13 hours of case study. The students were given homework each day and had an opportunity to sit a final exam, which counted towards university credit. Feedback from the participants was extremely positive, praising the expertise and enthusiasm of the lecturers, as well as the high standard and quality of their lectures. Initial dis...

  11. Amps particle accelerator definition study

    Science.gov (United States)

    Sellen, J. M., Jr.

    1975-01-01

    The Particle Accelerator System of the AMPS (Atmospheric, Magnetospheric, and Plasmas in Space) payload is a series of charged particle accelerators to be flown with the Space Transportation System Shuttle on Spacelab missions. In the configuration presented, the total particle accelerator system consists of an energetic electron beam, an energetic ion accelerator, and both low voltage and high voltage plasma acceleration devices. The Orbiter is illustrated with such a particle accelerator system.

  12. LHCb GPU Acceleration Project

    CERN Document Server

    AUTHOR|(SzGeCERN)744808; Campora Perez, Daniel Hugo; Neufeld, Niko; Vilasis Cardona, Xavier

    2016-01-01

    The LHCb detector is due to be upgraded for processing high-luminosity collisions, which will increase the load on its computation infrastructure from 100 GB/s to 4 TB/s, encouraging us to look for new ways of accelerating the Online reconstruction. The Coprocessor Manager is our new framework for integrating LHCb’s existing computation pipelines with massively parallel algorithms running on GPUs and other accelerators. This paper describes the system and analyzes its performance.

  13. Accelerating News Issue 2

    CERN Document Server

    Kahle, K; Wildner, E

    2012-01-01

    In this summer issue we look at how developments in collimator materials could have applications in aerospace and beyond, and how Polish researchers are harnessing accelerators for medical and industrial uses. We see how the LHC luminosity upgrade is linking with European industry and US researchers, and how the neutrino oscillation community is progressing. We find out the mid-term status of TIARA-PP and how it is mapping European accelerator education resources.

  14. Accelerated Evidence Search Report

    Science.gov (United States)

    2014-07-01

    Accelerated Evidence Search Report IMPORTANT INFORMATIVE STATEMENTS Accelerated Multi-Camera Evidence Search and Retrieval CSSP Project #: CSSP -2013...CD-1063 was supported by the Canadian Safety and Security Program ( CSSP ) which is led by Defence Research and Development Canada’s Centre for...Border Technology Division The CSSP is a federally-funded program to strengthen Canada’s ability to anticipate, prevent/mitigate, prepare for, respond to

  15. Template-Directed Biopolymerization: Tape-Copying Turing Machines

    Science.gov (United States)

    Sharma, Ajeet K.; Chowdhury, Debashish

    2012-10-01

    DNA, RNA and proteins are among the most important macromolecules in a living cell. These molecules are polymerized by molecular machines. These natural nano-machines polymerize such macromolecules, adding one monomer at a time, using another linear polymer as the corresponding template. The machine utilizes input chemical energy to move along the template which also serves as a track for the movements of the machine. In the Alan Turing year 2012, it is worth pointing out that these machines are "tape-copying Turing machines". We review the operational mechanisms of the polymerizer machines and their collective behavior from the perspective of statistical physics, emphasizing their common features in spite of the crucial differences in their biological functions. We also draw the attention of the physics community to another class of modular machines that carry out a different type of template-directed polymerization. We hope this review will inspire new kinetic models for these modular machines.

  16. Electroless Fabrication of Cobalt Alloys Nanowires within Alumina Template

    Directory of Open Access Journals (Sweden)

    Nazila Dadvand

    2007-01-01

    Full Text Available A new method of nanowire fabrication based on electroless deposition process is described. The method is novel compared to the current electroless procedure used in making nanowires as it involves growing nanowires from the bottom up. The length of the nanowires was controlled at will simply by adjusting the deposition time. The nanowires were fabricated within the nanopores of an alumina template. It was accomplished by coating one side of the template by a thin layer of palladium in order to activate the electroless deposition within the nanopores from bottom up. However, prior to electroless deposition process, the template was pretreated with a suitable wetting agent in order to facilitate the penetration of the plating solution through the pores. As well, the electroless deposition process combined with oblique metal evaporation process within a prestructured silicon wafer was used in order to fabricate long nanowires along one side of the grooves within the wafer.

  17. Computer-Aided Template for Model Reuse, Development and Maintenance

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    2014-01-01

    A template-based approach for model development is presented in this work. Based on a model decomposition technique, the computer-aided template concept has been developed. This concept is implemented as a software tool , which provides a user-friendly interface for following the workflow steps......, as well as the guidance through the steps providing additional information and comments. The application of the tool is highlighted with a multiscale modeling case study involving a catalytic membrane fixed bed reactor. The modeling templates for reactor as well as particle scales have been developed...... . For the particle scale, two alternative mechanisms to describe the diffusion inside catalyst pellets are available: a Fickian diffusion model and a dusty gas model . Moreover, the effects of isothermal and non-isothermal catalyst are also considered during the model development process. Thereby, any number...

  18. Template-mediated ontogenesis: A novel approach to mesomorphic materials

    Energy Technology Data Exchange (ETDEWEB)

    Martin, J.E.; Anderson, M.T.; Odinek, J.; Newcomer, P.

    1996-07-01

    In this report the authors describe the methods they have developed for producing stable periodic mesoporous silica gels, thin films of mesoporous silica for sensor applications, a route to nonaqueous synthesis, and the use of various additives in controlling the pore size and structure of these materials. Mesoporous silica is formed by templating silica precursors around micelles of cationic quaternary ammonium surfactants. During the synthesis these micelles undergo a phase transition to a hexagonal, lamellar or cubic liquid crystalline state, thus imposing periodic order on the amorphous silica which occupies the interface of the hydrophilic cationic headgroups of the surfactants. The product of the bulk wet synthesis is a gel composed of micron size silica/surfactant particles, each of which consists of one or more crystalline domains of silica condensed around the surfactant template. The wet gel can then be washed and pyrolyzed to remove the surfactant template, yielding the periodic mesoporous silica product.

  19. Anticipatory Eye Movements in Interleaving Templates of Human Behavior

    Science.gov (United States)

    Matessa, Michael

    2004-01-01

    Performance modeling has been made easier by architectures which package psychological theory for reuse at useful levels of abstraction. CPM-GOMS uses templates of behavior to package at a task level (e.g., mouse move-click, typing) predictions of lower-level cognitive, perceptual, and motor resource use. CPM-GOMS also has a theory for interleaving resource use between templates. One example of interleaving is anticipatory eye movements. This paper describes the use of ACT-Stitch, a framework for translating CPM-GOMS templates and interleaving theory into ACT-R, to model anticipatory eye movements in skilled behavior. The anticipatory eye movements explain performance in a well-practiced perceptual/motor task, and the interleaving theory is supported with results from an eye-tracking experiment.

  20. Templates for Cross-Cultural and Culturally Specific Usability Testing

    DEFF Research Database (Denmark)

    Clemmensen, Torkil

    2011-01-01

    -cultural field study of think-aloud testing done by usability vendor companies in the three countries. The result was a grounded theory of cultural variations in the production of a usability problem list. Study 2 was a follow-up, ethnographic interview study of how the companies typically perform usability......The cultural diversity of users of technology challenges our methods for usability testing. This article suggests templates for cross-culturally and culturally specific usability testing, based on studies of usability testing in companies in Mumbai, Beijing, and Copenhagen. Study 1 was a cross...... tests. The result was the construction of templates for usability testing. The culturally specific templates were in Mumbai “user-centered evaluation,” Copenhagen “client-centered evaluation,” and Beijing “evaluator-centered evaluation.” The findings are compared with related research...

  1. Conducting Polymer Nanostructures: Template Synthesis and Applications in Energy Storage

    Directory of Open Access Journals (Sweden)

    Lijia Pan

    2010-07-01

    Full Text Available Conducting polymer nanostructures have received increasing attention in both fundamental research and various application fields in recent decades. Compared with bulk conducting polymers, conducting polymer nanostructures are expected to display improved performance in energy storage because of the unique properties arising from their nanoscaled size: high electrical conductivity, large surface area, short path lengths for the transport of ions, and high electrochemical activity. Template methods are emerging for a sort of facile, efficient, and highly controllable synthesis of conducting polymer nanostructures. This paper reviews template synthesis routes for conducting polymer nanostructures, including soft and hard template methods, as well as its mechanisms. The application of conducting polymer mesostructures in energy storage devices, such as supercapacitors and rechargeable batteries, are discussed.

  2. In vitro transcription of a torsionally constrained template

    DEFF Research Database (Denmark)

    Bentin, Thomas; Nielsen, Peter E

    2002-01-01

    of torsionally constrained DNA by free RNAP. We asked whether or not a newly synthesized RNA chain would limit transcription elongation. For this purpose we developed a method to immobilize covalently closed circular DNA to streptavidin-coated beads via a peptide nucleic acid (PNA)-biotin conjugate in principle...... mimicking a SAR/MAR attachment. We used this construct as a torsionally constrained template for transcription of the beta-lactamase gene by Escherichia coli RNAP and found that RNA synthesis displays similar characteristics in terms of rate of elongation whether or not the template is torsionally...... constrained. We conclude that transcription of a natural bacterial gene may proceed with high efficiency despite the fact that newly synthesized RNA is entangled around the template in the narrow confines of torsionally constrained supercoiled DNA....

  3. Fabrication of Gold Nanochains with Octreotide Acetate Template

    Directory of Open Access Journals (Sweden)

    Jing Zhou

    2013-01-01

    Full Text Available We described a facile method for assembly gold nanochains by using octreotide acetate as template in aqueous environment. In acidic solution, octreotide acetate was conferred positive charges and its structure changed to chain-like. The monodisperse negative gold nanoparticles were bound to the surface of octreotide acetate template by electrostatic attraction and the interaction of gold nanoparticles with amino acid residues (tryptophan and lysine. The fabricated gold nanostructure presented chain-like observed by transmission electron microscopy. The cytotoxicity of gold nanochains was examined by tetrazolium dye-based microtitration (MTT assay, which demonstrated significantly less toxicity than that of octreotide acetate alone. The MTT assay also reflected the combinative action between the gold nanoparticles with octreotide acetate. Our work lays the groundwork for developing octreotide acetate-templated nanomaterials that can be used as a building block for the creation of nanomaterials. Meanwhile, the harmfulless gold nanochains have great application prospects in the biomedical filed.

  4. Ferritin-Templated Quantum-Dots for Quantum Logic Gates

    Science.gov (United States)

    Choi, Sang H.; Kim, Jae-Woo; Chu, Sang-Hyon; Park, Yeonjoon; King, Glen C.; Lillehei, Peter T.; Kim, Seon-Jeong; Elliott, James R.

    2005-01-01

    Quantum logic gates (QLGs) or other logic systems are based on quantum-dots (QD) with a stringent requirement of size uniformity. The QD are widely known building units for QLGs. The size control of QD is a critical issue in quantum-dot fabrication. The work presented here offers a new method to develop quantum-dots using a bio-template, called ferritin, that ensures QD production in uniform size of nano-scale proportion. The bio-template for uniform yield of QD is based on a ferritin protein that allows reconstitution of core material through the reduction and chelation processes. One of the biggest challenges for developing QLG is the requirement of ordered and uniform size of QD for arrays on a substrate with nanometer precision. The QD development by bio-template includes the electrochemical/chemical reconsitution of ferritins with different core materials, such as iron, cobalt, manganese, platinum, and nickel. The other bio-template method used in our laboratory is dendrimers, precisely defined chemical structures. With ferritin-templated QD, we fabricated the heptagonshaped patterned array via direct nano manipulation of the ferritin molecules with a tip of atomic force microscope (AFM). We also designed various nanofabrication methods of QD arrays using a wide range manipulation techniques. The precise control of the ferritin-templated QD for a patterned arrangement are offered by various methods, such as a site-specific immobilization of thiolated ferritins through local oxidation using the AFM tip, ferritin arrays induced by gold nanoparticle manipulation, thiolated ferritin positioning by shaving method, etc. In the signal measurements, the current-voltage curve is obtained by measuring the current through the ferritin, between the tip and the substrate for potential sweeping or at constant potential. The measured resistance near zero bias was 1.8 teraohm for single holoferritin and 5.7 teraohm for single apoferritin, respectively.

  5. Comparative studies on the properties of glycyrrhetinic acid-loaded PLGA microparticles prepared by emulsion and template methods.

    Science.gov (United States)

    Wang, Hong; Zhang, Guangxing; Sui, Hong; Liu, Yanhua; Park, Kinam; Wang, Wenping

    2015-12-30

    The O/W emulsion method has been widely used for the production of poly (lactide-co-glycolide) (PLGA) microparticles. Recently, a template method has been used to make homogeneous microparticles with predefined size and shape, and shown to be useful in encapsulating different types of active compounds. However, differences between the template method and emulsion method have not been examined. In the current study, PLGA microparticles were prepared by the two methods using glycyrrhetinic acid (GA) as a model drug. The properties of obtained microparticles were characterized and compared on drug distribution, in vitro release, and degradation. An encapsulation efficiency of over 70% and a mean particle size of about 40μm were found for both methods. DSC thermograms and XRPD diffractograms indicated that GA was highly dispersed or in the amorphous state in the matrix of microparticles. The emulsion method produced microparticles of a broad size distribution with a core-shell type structure and many drug-rich domains inside each microparticle. Its drug release and matrix degradation was slow before Day 50 and then accelerated. In contrast, the template method formed microparticles with narrow size distribution and drug distribution without apparent drug-rich domains. The template microparticles with a loading efficiency of 85% exhibited a zero-order release profile for 3 months after the initial burst release of 26.7%, and a steady surface erosion process as well. The same microparticles made by two different methods showed two distinguished drug release profiles. The two different methods can be supplementary with each other in optimization of drug formulation for achieving predetermined drug release patterns. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Computer-aided modelling template: Concept and application

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    2015-01-01

    decomposition technique which identifies generic steps and workflow involved, the computer-aided template concept has been developed. This concept is implemented as a software tool, which provides a user-friendly interface for following the workflow steps and guidance through the steps providing additional......Modelling is an important enabling technology in modern chemical engineering applications. A template-based approach is presented in this work to facilitate the construction and documentation of the models and enable their maintenance for reuse in a wider application range. Based on a model...

  7. An Empirical Ultraviolet Iron Spectrum Template Applicable to Active Galaxies

    DEFF Research Database (Denmark)

    Vestergaard, Marianne; Wilkes, B. J.

    2001-01-01

    Iron emission is often a severe contaminant in optical-ultraviolet spectra of active galaxies. Its presence complicates emission line studies. A viable solution, already successfully applied at optical wavelengths, is to use an empirical iron emission template. We have generated FeII and Fe......III templates for ultraviolet active galaxy spectra based on HST archival 1100 - 3100 A spectra of IZw1. Their application allows fitting and subtraction of the iron emission in active galaxy spectra. This work has shown that in particular CIII] lambda 1909 can be heavily contaminated by other line emission...

  8. Template-Assisted Formation of Nanostructured Dopamine-Modified Polymers

    Directory of Open Access Journals (Sweden)

    Liping Zhu

    2017-11-01

    Full Text Available Dopamine-modified alginate and gelatin were prepared. The polymers were characterized and the properties of their aqueous solutions were investigated. Aqueous solutions of dopamine-modified alginate and gelatin with a concentration exceeding 20 mg/mL naturally formed gels after 16 h. Although polydopamine itself was not used for template-assisted nanostructure formation, the modified polymers could be used with dopamine. Mixing with dopamine allowed the precise shape of the template to be maintained in the resulting material, allowing nanopatterned surfaces and nanotubes to be prepared.

  9. A Bayesian Generative Model for Surface Template Estimation

    Directory of Open Access Journals (Sweden)

    Jun Ma

    2010-01-01

    Full Text Available 3D surfaces are important geometric models for many objects of interest in image analysis and Computational Anatomy. In this paper, we describe a Bayesian inference scheme for estimating a template surface from a set of observed surface data. In order to achieve this, we use the geodesic shooting approach to construct a statistical model for the generation and the observations of random surfaces. We develop a mode approximation EM algorithm to infer the maximum a posteriori estimation of initial momentum μ, which determines the template surface. Experimental results of caudate, thalamus, and hippocampus data are presented.

  10. Solvothermal removal of the organic template from L{sub 3} ('sponge') templated silica monoliths

    Energy Technology Data Exchange (ETDEWEB)

    Dabbs, Daniel M. [Princeton University, Department of Chemical Engineering (United States); Mulders, Norbert [University of Delaware, Department of Physics and Astronomy (United States); Aksay, Ilhan A. [Princeton University, Department of Chemical Engineering (United States)], E-mail: iaksay@princeton.EDU

    2006-10-15

    We compare the methods of continuous solvent (Soxhlet) and supercritical solvent extractions for the removal of the organic template from nanostructured silica monoliths. Our monoliths are formed by templating the L{sub 3} liquid crystal phase of cetylpyridinium chloride in aqueous solutions with tetramethoxy silane. The monoliths that result from both Soxhlet and supercritical extraction methods are mechanically robust, optically clear, and free of cracks. The Soxhlet method compares favorably with supercritical solvent extraction in that equivalent L{sub 3}-templated silica can be synthesized without the use of specialized reactor hardware or higher temperatures and high pressures, while avoiding noxious byproducts. The comparative effectiveness of various solvents in the Soxhlet process is related to the Hildebrand solubility parameter, determined by the effective surface area of the extracted silica.

  11. Detection of cancerous masses in mammograms by template matching: optimization of template brightness distribution by means of evolutionary algorithm.

    Science.gov (United States)

    Bator, Marcin; Nieniewski, Mariusz

    2012-02-01

    Optimization of brightness distribution in the template used for detection of cancerous masses in mammograms by means of correlation coefficient is presented. This optimization is performed by the evolutionary algorithm using an auxiliary mass classifier. Brightness along the radius of the circularly symmetric template is coded indirectly by its second derivative. The fitness function is defined as the area under curve (AUC) of the receiver operating characteristic (ROC) for the mass classifier. The ROC and AUC are obtained for a teaching set of regions of interest (ROIs), for which it is known whether a ROI is true-positive (TP) or false-positive (F). The teaching set is obtained by running the mass detector using a template with a predetermined brightness. Subsequently, the evolutionary algorithm optimizes the template by classifying masses in the teaching set. The optimal template (OT) can be used for detection of masses in mammograms with unknown ROIs. The approach was tested on the training and testing sets of the Digital Database for Screening Mammography (DDSM). The free-response receiver operating characteristic (FROC) obtained with the new mass detector seems superior to the FROC for the hemispherical template (HT). Exemplary results are the following: in the case of the training set in the DDSM, the true-positive fraction (TPF) = 0.82 for the OT and 0.79 for the HT; in the case of the testing set, TPF = 0.79 for the OT and 0.72 for the HT. These values were obtained for disease cases, and the false-positive per image (FPI) = 2.

  12. Investigation of Terminology Coverage in Radiology Reporting Templates and Free‐text Reports

    Directory of Open Access Journals (Sweden)

    Yi Hong

    2015-06-01

    Full Text Available The Radiological Society of North America (RSNA is improving reporting practices by developing an online library of clear and consistent report templates. To compare term occurrences in free‐text radiology reports and RSNA reporting templates, the Wilcoxon signed‐rank test method was applied to investigate how much of the content of conventional narrative reports is covered by the terms included in the RSNA reporting templates. The results show that the RSNA reporting templates cover most terms that appear in actual radiology reports. The Wilcoxon test may be helpful in evaluatingexisting templates and guiding the enhancement of reporting templates.

  13. Small type accelerator. Try for accelerator driven system

    CERN Document Server

    Mori, Y

    2003-01-01

    FFAG (Fixed-field alternating gradient) accelerator for accelerator driven subcritical reactor, which aims to change from long-lived radioactive waste to short-lived radioactivity, is introduced. It is ring accelerator. The performance needed is proton as accelerator particle, 10MW (total) beam power, about 1GeV beam energy, >30% power efficiency and continuous beam. The feature of FFAG accelerator is constant magnetic field. PoP (Proof-of-principle)-FFAG accelerator, radial type, was run at first in Japan in 2000. The excursion is about some ten cm. In principle, beam can be injected and extracted at any place of ring. The 'multi-fish' acceleration can accelerate beams to 100% duty by repeating acceleration. 150MeV-FFAG accelerator has been started since 2001. It tried to practical use, for example, treatment of cancer. (S.Y.)

  14. Role of fractalkine/CX3CR1 interaction in light-induced photoreceptor degeneration through regulating retinal microglial activation and migration.

    Directory of Open Access Journals (Sweden)

    Meng Zhang

    Full Text Available BACKGROUND: Excessive exposure to light enhances the progression and severity of some human retinal degenerative diseases. While retinal microglia are likely to be important in neuron damage associated with these diseases, the relationship between photoreceptor damage and microglial activation remains poorly understood. Some recent studies have indicated that the chemokine fractalkine is involved in the pathogenesis of many neurodegenerative diseases. The present study was performed to investigate the cross-talk between injured photoreceptors and activated retinal microglia, focusing on the role of fractalkine and its receptor CX3CR1 in light-induced photoreceptor degeneration. METHODOLOGY/PRINCIPAL FINDINGS: Both in vivo and in vitro experiments were involved in the research. In vivo, Sprague-Dawley rats were exposed to blue light for 24 hours. In vitro, the co-culture of primary retinal microglia and a photoreceptor cell line (661W cell was exposed to blue light for five hours. Some cultures were pretreated by the addition of anti-CX3CR1 neutralizing antibody or recombinant fractalkine. Expression of fractalkine/CX3CR1 and inflammatory cytokines was detected by immunofluorescence, real-time PCR, Western immunoblot analysis, and ELISA assay. TUNEL method was used to detect cell apoptosis. In addition, chemotaxis assay was performed to evaluate the impact of soluble fractalkine on microglial migration. Our results showed that the expression of fractalkine that was significantly upregulated after exposure to light, located mainly at the photoreceptors. The extent of photoreceptor degeneration and microglial migration paralleled the increased level of fractalkine/CX3CR1. Compared with the control, the expression of inflammatory cytokines was significantly downregulated in the anti-CX3CR1 neutralizing antibody-treated group, and the number of photoreceptors was also well preserved. The addition of recombinant full-length fractalkine or soluble

  15. Protective effects of bilberry and lingonberry extracts against blue light-emitting diode light-induced retinal photoreceptor cell damage in vitro

    Science.gov (United States)

    2014-01-01

    Background Blue light is a high-energy or short-wavelength visible light, which induces retinal diseases such as age-related macular degeneration and retinitis pigmentosa. Bilberry (Vaccinium myrtillus L.) and lingonberry (Vaccinium vitis-idaea) contain high amounts of polyphenols (anthocyanins, resveratrol, and proanthocyanidins) and thus confer health benefits. This study aimed to determine the protective effects and mechanism of action of bilberry extract (B-ext) and lingonberry extract (L-ext) and their active components against blue light-emitting diode (LED) light-induced retinal photoreceptor cell damage. Methods Cultured murine photoreceptor (661 W) cells were exposed to blue LED light following treatment with B-ext, L-ext, or their constituents (cyanidin, delphinidin, malvidin, trans-resveratrol, and procyanidin B2). 661 W cell viability was assessed using a tetrazolium salt (WST-8) assay and Hoechst 33342 nuclear staining, and intracellular reactive oxygen species (ROS) production was determined using CM-H2DCFDA after blue LED light exposure. Activation of p38 mitogen-activated protein kinase (p38 MAPK), nuclear factor-kappa B (NF-κB), and LC3, an ubiquitin-like protein that is necessary for the formation of autophagosomes, were analyzed using Western blotting. Caspase-3/7 activation caused by blue LED light exposure in 661 W cells was determined using a caspase-3/7 assay kit. Results B-ext, L-ext, NAC, and their active components improved the viability of 661 W cells and inhibited the generation of intracellular ROS induced by blue LED light irradiation. Furthermore, B-ext and L-ext inhibited the activation of p38 MAPK and NF-κB induced by blue LED light exposure. Finally, B-ext, L-ext, and NAC inhibited caspase-3/7 activation and autophagy. Conclusions These findings suggest that B-ext and L-ext containing high amounts of polyphenols exert protective effects against blue LED light-induced retinal photoreceptor cell damage mainly through inhibition

  16. Protective effects of bilberry and lingonberry extracts against blue light-emitting diode light-induced retinal photoreceptor cell damage in vitro.

    Science.gov (United States)

    Ogawa, Kenjirou; Kuse, Yoshiki; Tsuruma, Kazuhiro; Kobayashi, Saori; Shimazawa, Masamitsu; Hara, Hideaki

    2014-04-02

    Blue light is a high-energy or short-wavelength visible light, which induces retinal diseases such as age-related macular degeneration and retinitis pigmentosa. Bilberry (Vaccinium myrtillus L.) and lingonberry (Vaccinium vitis-idaea) contain high amounts of polyphenols (anthocyanins, resveratrol, and proanthocyanidins) and thus confer health benefits. This study aimed to determine the protective effects and mechanism of action of bilberry extract (B-ext) and lingonberry extract (L-ext) and their active components against blue light-emitting diode (LED) light-induced retinal photoreceptor cell damage. Cultured murine photoreceptor (661 W) cells were exposed to blue LED light following treatment with B-ext, L-ext, or their constituents (cyanidin, delphinidin, malvidin, trans-resveratrol, and procyanidin B2). 661 W cell viability was assessed using a tetrazolium salt (WST-8) assay and Hoechst 33342 nuclear staining, and intracellular reactive oxygen species (ROS) production was determined using CM-H2DCFDA after blue LED light exposure. Activation of p38 mitogen-activated protein kinase (p38 MAPK), nuclear factor-kappa B (NF-κB), and LC3, an ubiquitin-like protein that is necessary for the formation of autophagosomes, were analyzed using Western blotting. Caspase-3/7 activation caused by blue LED light exposure in 661 W cells was determined using a caspase-3/7 assay kit. B-ext, L-ext, NAC, and their active components improved the viability of 661 W cells and inhibited the generation of intracellular ROS induced by blue LED light irradiation. Furthermore, B-ext and L-ext inhibited the activation of p38 MAPK and NF-κB induced by blue LED light exposure. Finally, B-ext, L-ext, and NAC inhibited caspase-3/7 activation and autophagy. These findings suggest that B-ext and L-ext containing high amounts of polyphenols exert protective effects against blue LED light-induced retinal photoreceptor cell damage mainly through inhibition of ROS production and activation of

  17. Accelerators in Science and Technology

    CERN Document Server

    Kailas, S

    2002-01-01

    Accelerators built for basic research in frontier areas of science have become important and inevitable tools in many areas of science and technology. Accelerators are examples of science driven high technology development. Accelerators are used for a wide ranging applications, besides basic research. Accelerator based multidisciplinary research holds great promise

  18. Plasma-based accelerator structures

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, Carl B. [Univ. of California, Berkeley, CA (United States)

    1999-12-01

    Plasma-based accelerators have the ability to sustain extremely large accelerating gradients, with possible high-energy physics applications. This dissertation further develops the theory of plasma-based accelerators by addressing three topics: the performance of a hollow plasma channel as an accelerating structure, the generation of ultrashort electron bunches, and the propagation of laser pulses is underdense plasmas.

  19. Nanomolar determination of Pb (II ions by selective templated electrode

    Directory of Open Access Journals (Sweden)

    Mazloum-Ardakani Mohammad

    2012-01-01

    Full Text Available Polypyrrole modified electrode, prepared by electropolymerization of pyrrole in the presence of methyl red as a dopant, was templated with respect to Pb2+ ion and applied for potentiometric and voltammetric detection of this ion. The templating process improved the analytical response characteristics of the electrode, specially their selectivity, with respect to Pb2+ ion. The improvement depends on both the incorporated ligand (dopant and the templating process, with the latter being more vital. The potentiometric response of the electrode was linear within the Pb2+ concentration range of 2.0×10-6 to 5.0×10-2 M with a near-Nernstian slope of 28.6 mV decade-1 and a detection limit of 7.0 ×10-7 M. The electrode was also used for preconcentration differential pulse anodic stripping voltammetry (DPASV and results showed that peak currents for the incorporated lead species were dependent on the metal ion concentration in the range of 1.0×10-8 to 1.0×10-3 M. The detection limit of DPASV method was 3.5 ×10-9 M. The selectivity of the electrode with respect to some transition metal ions was investigated. The modified-templated electrode was used for the successful assay of lead in two standard reference material samples.

  20. organic template free synthesis of zsm11 from kaolinite clay

    African Journals Online (AJOL)

    user

    hydrocarbon, etc. Accordingly, this work present successful synthesis of zeolite ZSM11 from kaolinite clay, seeded with. NaY type zeolite and aged for 3-11 days, in an organic template free condition. The used kaolinite clays were sourced from two different mines in Nigeria, namely; Kankara and Onibode. They were both ...

  1. Ultrafast coherence transfer in DNA-templated silver nanoclusters

    DEFF Research Database (Denmark)

    Thyrhaug, Erling; Bogh, Sidsel Ammitzbøll; Carro, Miguel

    2017-01-01

    DNA-templated silver nanoclusters of a few tens of atoms or less have come into prominence over the last several years due to very strong absorption and efficient emission. Applications in microscopy and sensing have already been realized, however little is known about the excited-state structure...

  2. Public Notification - Revised Total Coliform Rule Failure To Report Template

    Science.gov (United States)

    When a PWS fails to report their monitoring results for Total Coliform bacteria, it must issue a public notice to inform consumers of its water of that failure to report. This template can be used as a guide for preparing that public notice.

  3. On the anodic aluminium oxide refractive index of nanoporous templates

    Science.gov (United States)

    Hierro-Rodriguez, A.; Rocha-Rodrigues, P.; Valdés-Bango, F.; Alameda, J. M.; Jorge, P. A. S.; Santos, J. L.; Araujo, J. P.; Teixeira, J. M.; Guerreiro, A.

    2015-11-01

    In the present study, we have determined the intrinsic refractive index of anodic aluminium oxide, which is originated by the formation of nanoporous alumina templates. Different templates have been fabricated by the conventional two-step anodization procedure in oxalic acid. Their porosities were modified by chemical wet etching allowing the tuning of their effective refractive indexes (air-filled nanopores  +  anodic aluminium oxide). By standard spectroscopic light transmission measurements, the effective refractive index for each different template was extracted in the VIS-NIR region. The determination of the intrinsic anodic aluminium oxide refractive index was performed by using the Maxwell-Garnett homogenization theory. The results are coincident for all the fabricated samples. The obtained refractive index (~1.55) is quite lower (~22%) than the commonly used Al2O3 handbook value (~1.75), showing that the amorphous nature of the anodic oxide structure strongly conditions its optical properties. This difference is critical for the correct design and modeling of optical plasmonic metamaterials based on anodic aluminium oxide nanoporous templates.

  4. Supported lipid bilayers as templates to design manganese oxide ...

    Indian Academy of Sciences (India)

    dioleoyl phosphatidylcholine (DOPC) have been used as templates to synthesize these nanoparticles in a water- based medium at room ... Keywords. Manganese oxide; supported lipid bilayers; nanoparticles; organized assemblies. 1. Introduction .... before coating with two layers of the lipid DOMA,. DOMA+DPPC or ...

  5. Assessing ligand efficiencies using template-based molecular ...

    Indian Academy of Sciences (India)

    Statistical modelling using artificial neural network (ANN: 2 = 0.922) and multiple linear regression method (MLR: 2 = 0.851) showed good correlation between the biological activity, binding affinity, and different ligand efficiencies of the compounds, which suggest the robustness of the template-based binding ...

  6. General Template for the FMEA Applications in Primary Food Processing.

    Science.gov (United States)

    Özilgen, Sibel; Özilgen, Mustafa

    Data on the hazards involved in the primary steps of processing cereals, fruit and vegetables, milk and milk products, meat and meat products, and fats and oils are compiled with a wide-ranging literature survey. After determining the common factors from these data, a general FMEA template is offered, and its use is explained with a case study on pasteurized milk production.

  7. Automatic capture of attention by conceptually generated working memory templates.

    Science.gov (United States)

    Sun, Sol Z; Shen, Jenny; Shaw, Mark; Cant, Jonathan S; Ferber, Susanne

    2015-08-01

    Many theories of attention propose that the contents of working memory (WM) can act as an attentional template, which biases processing in favor of perceptually similar inputs. While support has been found for this claim, it is unclear how attentional templates are generated when searching real-world environments. We hypothesized that in naturalistic settings, attentional templates are commonly generated from conceptual knowledge, an idea consistent with sensorimotor models of knowledge representation. Participants performed a visual search task in the delay period of a WM task, where the item in memory was either a colored disk or a word associated with a color concept (e.g., "Rose," associated with red). During search, we manipulated whether a singleton distractor in the array matched the contents of WM. Overall, we found that search times were impaired in the presence of a memory-matching distractor. Furthermore, the degree of impairment did not differ based on the contents of WM. Put differently, regardless of whether participants were maintaining a perceptually colored disk identical to the singleton distractor, or whether they were simply maintaining a word associated with the color of the distractor, the magnitude of attentional capture was the same. Our results suggest that attentional templates can be generated from conceptual knowledge, in the physical absence of the visual feature.

  8. Making Legacy LMS adaptable using Policy and Policy templates

    NARCIS (Netherlands)

    Koesling, Arne; Herder, Eelco; De Coi, Juri; Abel, Fabian

    2008-01-01

    Koesling, A., Herder, E., De Coi, J., & Abel, F. (2008). Making Legacy LMS adaptable using Policy and Policy templates. In J. Baumeister & M. Atzmüller, Proceedings of the 16th Workshop on Adaptivity and User Modeling in Interactive System, ABIS 2008 (pp. 35-40). October, 6-8, 2008, Würzburg,

  9. Controlled growth of single nanowires within a supported alumina template

    DEFF Research Database (Denmark)

    Vlad, A.; Mátéfi-Tempfli, M.; Faniel, S.

    2006-01-01

    A simple technique for fabricating single nanowires with well-defined position is presented. The process implies the use of a silicon nitride mask for selective electrochemical growth of the nanowires in a porous alumina template. We show that this method allows the realization of complex nanowire...

  10. Exploring Many-Core Design Templates for FPGAs and ASICs

    Directory of Open Access Journals (Sweden)

    Ilia Lebedev

    2012-01-01

    Full Text Available We present a highly productive approach to hardware design based on a many-core microarchitectural template used to implement compute-bound applications expressed in a high-level data-parallel language such as OpenCL. The template is customized on a per-application basis via a range of high-level parameters such as the interconnect topology or processing element architecture. The key benefits of this approach are that it (i allows programmers to express parallelism through an API defined in a high-level programming language, (ii supports coarse-grained multithreading and fine-grained threading while permitting bit-level resource control, and (iii reduces the effort required to repurpose the system for different algorithms or different applications. We compare template-driven design to both full-custom and programmable approaches by studying implementations of a compute-bound data-parallel Bayesian graph inference algorithm across several candidate platforms. Specifically, we examine a range of template-based implementations on both FPGA and ASIC platforms and compare each against full custom designs. Throughout this study, we use a general-purpose graphics processing unit (GPGPU implementation as a performance and area baseline. We show that our approach, similar in productivity to programmable approaches such as GPGPU applications, yields implementations with performance approaching that of full-custom designs on both FPGA and ASIC platforms.

  11. Polymerase chain reaction preparation of template for massively parallel pyrosequencing.

    Science.gov (United States)

    Whetten, Ross W; Sofía, Valenzuela A; Frampton, John

    2009-04-01

    Massively parallel pyrosequencing of DNA fragments immobilized on beads has been applied to genome survey sequencing and transcriptome analysis of a variety of eukaryotic organisms, including laboratory model species, agricultural crops and livestock, and species of interest to population biologists and ecologists. Preparation of sufficient high-quality template for sequencing has been an obstacle to sequence analysis of nucleic acids from tissues or cell types available in limited quantities. We report that the use of a biotinylated primer for polymerase chain reaction amplification allows removal of excess primer and poly(A) tract fragments from the sequencing templates, providing much higher yields of useful sequence information from pyrosequencing of amplified templates. This advance allows deep sequencing analysis of nucleic acids isolated from very small tissue samples. Massively parallel pyrosequencing is particularly useful for preliminary investigations of species that have not yet been the subject of significant genomic research, as genomic survey sequences and catalogs of expressed genes provide a means of linking the biology of less intensively studied species to that of more intensively studied model organisms. We obtained over 220 Mb of transcript DNA sequences from Abies fraseri (Pursh) Poir., a conifer species native to the southern Appalachian Mountains of eastern North America. Comparison of the resulting assembled putative transcripts with similar data obtained by other sequencing methods from other conifers demonstrates the utility of the improved sequencing template preparation.

  12. A visual template-matching method for articulation angle measurement

    CSIR Research Space (South Africa)

    De Saxe, C

    2015-09-01

    Full Text Available and proposed sensing methods are limited either in terms of commercial feasibility or measurement accuracy. This paper investigates a vision-based system consisting of a single tractor-mounted camera, a template-matching image processing algorithm...

  13. Binary gabor statistical features for palmprint template protection

    NARCIS (Netherlands)

    Mu, Meiru; Ruan, Qiuqi; Shao, X.; Spreeuwers, Lieuwe Jan; Veldhuis, Raymond N.J.

    2012-01-01

    The biometric template protection system requires a highquality biometric channel and a well-designed error correction code (ECC). Due to the intra-class variations of biometric data, an efficient fixed-length binary feature extractor is required to provide a high-quality biometric channel so that

  14. Abbreviated Pandemic Influenza Planning Template for Primary Care Offices

    Energy Technology Data Exchange (ETDEWEB)

    HCTT CHE

    2010-01-01

    The Abbreviated Pandemic Influenza Plan Template for Primary Care Provider Offices is intended to assist primary care providers and office managers with preparing their offices for quickly putting a plan in place to handle an increase in patient calls and visits, whether during the 2009-2010 influenza season or future influenza seasons.

  15. Conformational studies of common protein templates in macromolecularly imprinted polymers.

    Science.gov (United States)

    Kryscio, David R; Fleming, Michael Q; Peppas, Nicholas A

    2012-08-01

    Unlike the molecular imprinting of small molecule templates, molecularly imprinted polymers specific to large templates (>1,500 Da), have achieved limited success to date. Conformational stability of these labile macromolecules is one of the main factors that prevent the direct extension of successful procedures from the small molecule regime. We continue our systematic investigation of the effect of common components in macromolecular MIPs on the conformation of protein templates. Circular dichroism was used to show that frequently employed monomers and crosslinkers induce significant changes in the secondary structures of lysozyme and bovine hemoglobin. The extent to which this change occurs, at ligand concentrations far below what are typically used reported work, is cause for concern and provides as rational explanation for the lack of success in this arena. This is because a change in the template structure prior to polymerization would lead to the binding sites formed during polymerization to be specific to this alternate conformation. Subsequent studies with the macromolecule in its native state and the crosslinked network would not be successful. Using this information as a guide, we offer suggestions as to where work in macromolecular imprinted polymers should focus going forward in order for these antibody mimics to reach their vast potential as a new class of biomedical diagnostic devices.

  16. Synthesis of zeolite-templated carbons for hydrogen storage applications

    CSIR Research Space (South Africa)

    Musyoka, Nicholas M

    2013-10-01

    Full Text Available Hydrogen storage has been a key bottle-neck in the actualization of hydrogen as an energy carrier. The new field of hydrogen storage in templated carbonaceous materials has excited many researchers and considerable effort is being directed...

  17. A Comparison Between Craniofacial Templates of Iranian and Western Populations

    Directory of Open Access Journals (Sweden)

    Tahereh Hosseinzadeh Nik

    2012-02-01

    Full Text Available Templates are very useful tools for diagnosis of malocclusions. A number of templates have been provided for some populations in previous years. Since craniofacial characteristics of different ethnic groups are not the same, each population needs its own norms. The aim of this study was to provide orthodontic craniofacial templates for 8-16 year old Iranian boys and compare dentoskeletal features between Iranian and western populations. 3330 boys with the age range of 8-16 years were examined in Tehran, and 107 cases were finally chosen for the study and their lateral cephalograms were traced. Since there is no universal, consensus about the selection of one specific point or line for cephalometric superimposition, both the sella nasion (SN and basion nasion (Ba-N lines were chosen for this purpose. Based on both SN and Ba-N lines, a template was prepared for each age. Simple linear regression analysis was used to evaluate the angles and the multivariant regression analysis for evaluation of landmark vectors. Posterior cranial base, maxillary and mandibular lengths, upper and lower anterior facial heights (N-ANS and ANS-Me and posterior facial height (S-Go are greater in Iranian population. But anterior cranial base, height and inclination of the incisors and molar height are similar in two populations.

  18. Involute Spur Gear Template Development by Parametric Technique ...

    African Journals Online (AJOL)

    Nekky Umera

    An International Multi-Disciplinary Journal, Ethiopia. Vol. 3 (2), January, 2009. ISSN 1994-9057 (Print). ISSN 2070-0083 (Online). Involute Spur Gear Template Development by ... The third method and the most accurate system is the graphic ..... a three-dimensional part directly from a parametric solid modeled gear file.

  19. Battery Data MI Importer Template Quick Start Guide

    Science.gov (United States)

    Levinson, Laurie H.

    2017-01-01

    In order to ensure the persistent availability and reliability of test data generated over the course of the project, the M-SHELLS Project has decided to store acquired test data, as well as associated pedigree information, in the Granta Materials Intelligence (MI) database. To facilitate that effort, an importer template and associated graphical user interface (GUI) software have been developed, with this guide providing the operating instructions for their use. The template and automation software GUI are contained in the BatteryDataImporter.xlsm Excel workbook, and are to be used to import M-SHELLS summary, or pedigree, data and the associated raw test data results into an importer template-based file, formatted in such a way as to be ready for immediate upload to the Test Data: Battery Performance table of the Granta MI database. The provided GUI enables the user to select the appropriate summary data file(s), with each file containing the required information to identify any associated raw test data file(s) to be processed. In addition to describing the setup and operation of the importer template and GUI software, this guide also provides instructions for uploading processed data to the database and for viewing the data following upload.

  20. Natural biopolymers : novel templates for the synthesis of nanostructures.

    Science.gov (United States)

    Sonal Padalkar; J.R. Capadona; S.J. Rowan; C. Weder; Yu-Ho Won; Lia A. Stanciu; Robert J. Moon

    2010-01-01

    Biological systems such as proteins, viruses, and DNA have been most often reported to be used as templates for the synthesis of functional nanomaterials, but the properties of widely available biopolymers, such as cellulose, have been much less exploited for this purpose. Here, we report for the first time that cellulose nanocrystals (CNC) have the capacity to assist...

  1. Ordered nanoparticle arrays formed on engineered chaperonin protein templates

    Science.gov (United States)

    McMillan, R. Andrew; Paavola, Chad D.; Howard, Jeanie; Chan, Suzanne L.; Zaluzec, Nestor J.; Trent, Jonathan D.

    2002-01-01

    Traditional methods for fabricating nanoscale arrays are usually based on lithographic techniques. Alternative new approaches rely on the use of nanoscale templates made of synthetic or biological materials. Some proteins, for example, have been used to form ordered two-dimensional arrays. Here, we fabricated nanoscale ordered arrays of metal and semiconductor quantum dots by binding preformed nanoparticles onto crystalline protein templates made from genetically engineered hollow double-ring structures called chaperonins. Using structural information as a guide, a thermostable recombinant chaperonin subunit was modified to assemble into chaperonins with either 3 nm or 9 nm apical pores surrounded by chemically reactive thiols. These engineered chaperonins were crystallized into two-dimensional templates up to 20 microm in diameter. The periodic solvent-exposed thiols within these crystalline templates were used to size-selectively bind and organize either gold (1.4, 5 or 10nm) or CdSe-ZnS semiconductor (4.5 nm) quantum dots into arrays. The order within the arrays was defined by the lattice of the underlying protein crystal. By combining the self-assembling properties of chaperonins with mutations guided by structural modelling, we demonstrate that quantum dots can be manipulated using modified chaperonins and organized into arrays for use in next-generation electronic and photonic devices.

  2. Cu(I)/Cu(II) templated functional pseudorotaxanes and rotaxanes

    Indian Academy of Sciences (India)

    tion, (ii) donor/acceptor forces, (iii) hydrogen bond- ing, (iv) π–π stacking, (v) electrostatic forces.13 Metal ions as templates has shown accessible pathways ..... 34 456; (e) Sauvage J P (ed.) 2001 Molecu- lar machines and motors; Structure and bonding; Berlin,. Germany: Springer. 7. (a) Kay E R, Leigh D A and Zerbetto F ...

  3. A computationally efficient approach for template matching-based ...

    Indian Academy of Sciences (India)

    Image registration using template matching is an important step in image processing. In this paper, a simple, robust and computationally efficient approach is presented. The proposed approach is based on the properties of a normalized covariance matrix. The main advantage of the proposed approach is that the image ...

  4. Enzyme Activity and Biomolecule Templating at Liquid and Solid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Harvey W. Blanch

    2004-12-01

    There are two main components of this research program. The first involves studies of the adsorption and catalytic activity of proteins at fluid-fluid and fluid-solid interfaces; the second employs biological macromolecules as templates at the solid-liquid interface for controlled crystallization of inorganic materials, to provide materials with specific functionality.

  5. Identification of inhibitors of checkpoint kinase 1 through template screening.

    Science.gov (United States)

    Matthews, Thomas P; Klair, Suki; Burns, Samantha; Boxall, Kathy; Cherry, Michael; Fisher, Martin; Westwood, Isaac M; Walton, Michael I; McHardy, Tatiana; Cheung, Kwai-Ming J; Van Montfort, Rob; Williams, David; Aherne, G Wynne; Garrett, Michelle D; Reader, John; Collins, Ian

    2009-08-13

    Checkpoint kinase 1 (CHK1) is an oncology target of significant current interest. Inhibition of CHK1 abrogates DNA damage-induced cell cycle checkpoints and sensitizes p53 deficient cancer cells to genotoxic therapies. Using template screening, a fragment-based approach to small molecule hit generation, we have identified multiple CHK1 inhibitor scaffolds suitable for further optimization. The sequential combination of in silico low molecular weight template selection, a high concentration biochemical assay and hit validation through protein-ligand X-ray crystallography provided 13 template hits from an initial in silico screening library of ca. 15000 compounds. The use of appropriate counter-screening to rule out nonspecific aggregation by test compounds was essential for optimum performance of the high concentration bioassay. One low molecular weight, weakly active purine template hit was progressed by iterative structure-based design to give submicromolar pyrazolopyridines with good ligand efficiency and appropriate CHK1-mediated cellular activity in HT29 colon cancer cells.

  6. Processing of Nanosensors Using a Sacrificial Template Approach

    Science.gov (United States)

    Biaggi-Labiosa, Azlin M.; Hunter, Gary W.

    2012-01-01

    A new microsensor fabrication approach has been demonstrated based upon the use of nanostructures as templates. The fundamental idea is that existing nanostructures, such as carbon nano tubes or biological structures, have a material structure that can be used advantageously in order to provide new sensor systems but lack the advantages of some materials to, for example, operate at high temperatures. The approach is to start with a template using nanostructures such as a carbon nanotube. This template can then be coated by an oxide material with higher temperature capabilities. Upon heating in air, the carbon nanotube template is burned off, leaving only the metal oxide nanostructure. The resulting structure has a combination of the crystal structure and surface morphology of the carbon nanotube, combined with the material durability and hightemperature- sensing properties of the metal oxide. Further, since the metal oxide nanocrystals are deposited on the carbon nanotube, after burn-off what is left is a metal oxide porous nanostructure. This makes both the interior and the exterior of this nano structured sensor available for gas species detection. This, in effect, increases the surface area available for sensing, which has been shown in the past to significantly increase sensor performance.

  7. Julius – a template based supplementary electronic health record system

    Directory of Open Access Journals (Sweden)

    Klein Gunnar O

    2007-05-01

    Full Text Available Abstract Background EHR systems are widely used in hospitals and primary care centres but it is usually difficult to share information and to collect patient data for clinical research. This is partly due to the different proprietary information models and inconsistent data quality. Our objective was to provide a more flexible solution enabling the clinicians to define which data to be recorded and shared for both routine documentation and clinical studies. The data should be possible to reuse through a common set of variable definitions providing a consistent nomenclature and validation of data. Another objective was that the templates used for the data entry and presentation should be possible to use in combination with the existing EHR systems. Methods We have designed and developed a template based system (called Julius that was integrated with existing EHR systems. The system is driven by the medical domain knowledge defined by clinicians in the form of templates and variable definitions stored in a common data repository. The system architecture consists of three layers. The presentation layer is purely web-based, which facilitates integration with existing EHR products. The domain layer consists of the template design system, a variable/clinical concept definition system, the transformation and validation logic all implemented in Java. The data source layer utilizes an object relational mapping tool and a relational database. Results The Julius system has been implemented, tested and deployed to three health care units in Stockholm, Sweden. The initial responses from the pilot users were positive. The template system facilitates patient data collection in many ways. The experience of using the template system suggests that enabling the clinicians to be in control of the system, is a good way to add supplementary functionality to the present EHR systems. Conclusion The approach of the template system in combination with various local EHR

  8. Particle accelerator physics

    CERN Document Server

    Wiedemann, Helmut

    2007-01-01

    Particle Accelerator Physics is an in-depth and comprehensive introduction to the field of high-energy particle acceleration and beam dynamics. Part I gathers the basic tools, recalling the essentials of electrostatics and electrodynamics as well as of particle dynamics in electromagnetic fields. Part II is an extensive primer in beam dynamics, followed in Part III by the introduction and description of the main beam parameters. Part IV is devoted to the treatment of perturbations in beam dynamics. Part V discusses the details of charged particle accleration. Part VI and Part VII introduce the more advanced topics of coupled beam dynamics and the description of very intense beams. Part VIII is an exhaustive treatment of radiation from accelerated charges and introduces important sources of coherent radiation such as synchrotrons and free-electron lasers. Part IX collects the appendices gathering useful mathematical and physical formulae, parameters and units. Solutions to many end-of-chapter problems are give...

  9. Quasar Jet Acceleration

    Science.gov (United States)

    Polito, Nicholas; Hough, David

    2009-10-01

    We observed radio jets in six lobe-dominated quasars (LDQs) from 1995 to 2008 using the NRAO VLBA at 8.4 and 15 GHz. These observations have tracked jet component positions and velocities over that time period. There is a correlation between apparent jet speed and projected core distance in these LDQs at greater than 99 per cent confidence levels (Hough 2008, Extragalactic Jets, eds: Rector and DeYoung, ASP, p. 274). Four of our sources show this effect particularly strongly. We only tracked single jet components over relatively short distances, but the assumption of a unique velocity profile allows us to study component motion on an effective timescale of approximately 20-50 years. Results for 3C207 and 3C263 show a good fit using a constant acceleration model. The cause of such acceleration is still unknown, though ``magnetic acceleration'' by a gradient in magnetic field pressure is one possibility.

  10. Superconducting Accelerator Magnets

    CERN Document Server

    Mess, K H; Wolff, S

    1996-01-01

    The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements ...

  11. Accelerating the culture change!

    Science.gov (United States)

    Klunk, S W; Panetta, J; Wooten, J

    1996-11-01

    Exide Electronics, a major supplier of uninterruptible power system equipment, embarked on a journey of changing a culture to improve quality, enhance customer responsiveness, and reduce costs. This case study examines the evolution of change over a period of seven years, with particular emphasis on the most recent years, 1992 through 1995. The article focuses on the Raleigh plant operations and describes how each succeeding year built on the successes and fixed the shortcomings of the prior years to accelerate the culture change, including corrective action and continuous improvement processes, organizational structures, expectations, goals, achievements, and pitfalls. The real challenge to changing the culture was structuring a dynamic approach to accelerate change! The presentation also examines how the evolutionary process itself can be created and accelerated through ongoing communication, regular feedback of progress and goals, constant evaluation and direction of the process, and measuring and paying for performance.

  12. Artificial seismic acceleration

    Science.gov (United States)

    Felzer, Karen R.; Page, Morgan T.; Michael, Andrew J.

    2015-01-01

    In their 2013 paper, Bouchon, Durand, Marsan, Karabulut, 3 and Schmittbuhl (BDMKS) claim to see significant accelerating seismicity before M 6.5 interplate mainshocks, but not before intraplate mainshocks, reflecting a preparatory process before large events. We concur with the finding of BDMKS that their interplate dataset has significantly more fore- shocks than their intraplate dataset; however, we disagree that the foreshocks are predictive of large events in particular. Acceleration in stacked foreshock sequences has been seen before and has been explained by the cascade model, in which earthquakes occasionally trigger aftershocks larger than themselves4. In this model, the time lags between the smaller mainshocks and larger aftershocks follow the inverse power law common to all aftershock sequences, creating an apparent acceleration when stacked (see Supplementary Information).

  13. Microelectromechanical acceleration-sensing apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Robb M. (Albuquerque, NM); Shul, Randy J. (Albuquerque, NM); Polosky, Marc A. (Albuquerque, NM); Hoke, Darren A. (Albuquerque, NM); Vernon, George E. (Rio Rancho, NM)

    2006-12-12

    An acceleration-sensing apparatus is disclosed which includes a moveable shuttle (i.e. a suspended mass) and a latch for capturing and holding the shuttle when an acceleration event is sensed above a predetermined threshold level. The acceleration-sensing apparatus provides a switch closure upon sensing the acceleration event and remains latched in place thereafter. Examples of the acceleration-sensing apparatus are provided which are responsive to an acceleration component in a single direction (i.e. a single-sided device) or to two oppositely-directed acceleration components (i.e. a dual-sided device). A two-stage acceleration-sensing apparatus is also disclosed which can sense two acceleration events separated in time. The acceleration-sensing apparatus of the present invention has applications, for example, in an automotive airbag deployment system.

  14. Implementation of Accelerated Beam-Specific Matched-Filter-Based Optical Alignment

    Energy Technology Data Exchange (ETDEWEB)

    Awwal, A S; Rice, K L; Taha, T M

    2009-01-29

    Accurate automated alignment of laser beams in the National Ignition Facility (NIF) is essential for achieving extreme temperature and pressure required for inertial confinement fusion. The alignment achieved by the integrated control systems relies on algorithms processing video images to determine the position of the laser beam images in real-time. Alignment images that exhibit wide variations in beam quality require a matched-filter algorithm for position detection. One challenge in designing a matched-filter based algorithm is to construct a filter template that is resilient to variations in imaging conditions while guaranteeing accurate position determination. A second challenge is to process the image as fast as possible. This paper describes the development of a new analytical template that captures key recurring features present in the beam image to accurately estimate the beam position under good image quality conditions. Depending on the features present in a particular beam, the analytical template allows us to create a highly tailored template containing only those selected features. The second objective is achieved by exploiting the parallelism inherent in the algorithm to accelerate processing using parallel hardware that provides significant performance improvement over conventional processors. In particular, a Xilinx Virtex II Pro FPGA hardware implementation processing 32 templates provided a speed increase of about 253 times over an optimized software implementation running on a 2.0 GHz AMD Opteron core.

  15. BioAssay templates for the semantic web

    Directory of Open Access Journals (Sweden)

    Alex M. Clark

    2016-05-01

    Full Text Available Annotation of bioassay protocols using semantic web vocabulary is a way to make experiment descriptions machine-readable. Protocols are communicated using concise scientific English, which precludes most kinds of analysis by software algorithms. Given the availability of a sufficiently expressive ontology, some or all of the pertinent information can be captured by asserting a series of facts, expressed as semantic web triples (subject, predicate, object. With appropriate annotation, assays can be searched, clustered, tagged and evaluated in a multitude of ways, analogous to other segments of drug discovery informatics. The BioAssay Ontology (BAO has been previously designed for this express purpose, and provides a layered hierarchy of meaningful terms which can be linked to. Currently the biggest challenge is the issue of content creation: scientists cannot be expected to use the BAO effectively without having access to software tools that make it straightforward to use the vocabulary in a canonical way. We have sought to remove this barrier by: (1 defining a BioAssay Template (BAT data model; (2 creating a software tool for experts to create or modify templates to suit their needs; and (3 designing a common assay template (CAT to leverage the most value from the BAO terms. The CAT was carefully assembled by biologists in order to find a balance between the maximum amount of information captured vs. low degrees of freedom in order to keep the user experience as simple as possible. The data format that we use for describing templates and corresponding annotations is the native format of the semantic web (RDF triples, and we demonstrate some of the ways that generated content can be meaningfully queried using the SPARQL language. We have made all of these materials available as open source (http://github.com/cdd/bioassay-template, in order to encourage community input and use within diverse projects, including but not limited to our own

  16. A new route of synthesizing perovskite nanotubes by templating approach

    Science.gov (United States)

    Habiballah, Anisah Shafiqah; Osman, Nafisah; Jani, Abdul Mutalib Md

    2017-09-01

    A perovskite oxide for example Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) has attracted growing attention due to its high catalytic activity and mixed ionic/electronic conductivity. Recent research of BSCF is more comprehensively based on a remarkable trajectory of innovation, in particular with regards to the synthesis of perovskite structures in one-dimensional (1-D) nanometric scales as they promote not only to increase an active electrode area for the oxygen reduction reaction, but also allow the tailoring of electrode's architecture. Nevertheless, achieving the desired 1-D structure by a conventional method such as hydrothermal, solvothermal, or sonochemical are far from satisfactory. Herein, the aim of this work is to synthesize the BSCF perovskite nanotubes via soft templating approach, particularly using anodic aluminium oxide (AAO) as a template, focusing on the morphology, composition and structural properties were demonstrated. After the AAO template was anodized at 80 V, the fabricated template was clamped between apair of spectroscopic cells containing BSCF sol and deionized water (with a hole of both sides) for 24 hours. After that, the sample was removed from the cells followed by heat treatment process. The FESEM images showed that BSCF nanotubes were successfully achieved, with the diameter of the nanotubes' approximately 80 nm. The EDX result also confirmed the nominal stoichiometry of Ba0.5Sr0.5Co0.8Fe0.2O3-δ. Meanwhile, the XRD pattern confirmed a single crystalline phase of BSCF nanotubes was successfully obtained and congruent to a cubic perovskite structure of BSCF. Possible formation mechanism,as well as the schematic illustration of BSCF nanotubes inside the template was also discussed in this paper.

  17. Monoenergetic laser wakefield acceleration

    Directory of Open Access Journals (Sweden)

    N. E. Andreev

    2000-02-01

    Full Text Available Three dimensional test particle simulations are applied to optimization of the plasma-channeled laser wakefield accelerator (LWFA operating in a weakly nonlinear regime. Electron beam energy spread, emittance, and luminosity depend upon the proportion of the electron bunch size to the plasma wavelength. This proportion tends to improve with the laser wavelength increase. We simulate a prospective two-stage ∼1GeV LWFA with controlled energy spread and emittance. The input parameters correspond to realistic capabilities of the BNL Accelerator Test Facility that features a picosecond-terawatt CO_{2} laser and a high-brightness electron gun.

  18. Shielding high energy accelerators

    CERN Document Server

    Stevenson, Graham Roger

    2001-01-01

    After introducing the subject of shielding high energy accelerators, point source, line-of-sight models, and in particular the Moyer model. are discussed. Their use in the shielding of proton and electron accelerators is demonstrated and their limitations noted. especially in relation to shielding in the forward direction provided by large, flat walls. The limitations of reducing problems to those using it cylindrical geometry description are stressed. Finally the use of different estimators for predicting dose is discussed. It is suggested that dose calculated from track-length estimators will generally give the most satisfactory estimate. (9 refs).

  19. Accelerating News Issue 4

    CERN Document Server

    Szeberenyi, A; Wildner, E

    2012-01-01

    In this winter issue, we are very pleased to announce the approval of EuCARD-2 by the European Commission. We look at the conclusions of EUROnu in proposing future neutrino facilities at CERN, a new milestone reached by CLIC and progress on the SPARC upgrade using C-band technology. We also report on recent events: second Joint HiLumi LHC-LARP Annual Meeting and workshop on Superconducting technologies for the Next Generation of Accelerators aiming at closer collaboration with industry. The launch of the Accelerators for Society brochure is also highlighted.

  20. Light induces translocation of NF-κB p65 to the mitochondria and suppresses expression of cytochrome c oxidase subunit III (COX III) in the rat retina

    Energy Technology Data Exchange (ETDEWEB)

    Tomita, Hiroshi, E-mail: htomita@iwate-u.ac.jp [Laboratory of Visual Neuroscience, Graduate Course in Biological Sciences, Iwate University Division of Science and Engineering, 4-3-5 Ueda, Morioka, Iwate 020-8551 (Japan); Soft-Path Engineering Research Center (SPERC), Faculty of Science and Engineering, Iwate University, Morioka 020-8551 (Japan); Clinical Research, Innovation and Education Center, Tohoku University Hospital, 1-1 Seiryo, Aoba, Sendai, Miyagi 980-8574 (Japan); Tabata, Kitako, E-mail: ktabata@iwate-u.ac.jp [Laboratory of Visual Neuroscience, Graduate Course in Biological Sciences, Iwate University Division of Science and Engineering, 4-3-5 Ueda, Morioka, Iwate 020-8551 (Japan); Takahashi, Maki, E-mail: mqdelta@iwate-u.ac.jp [Laboratory of Visual Neuroscience, Graduate Course in Biological Sciences, Iwate University Division of Science and Engineering, 4-3-5 Ueda, Morioka, Iwate 020-8551 (Japan); Nishiyama, Fumiaki, E-mail: t2114018@iwate-u.ac.jp [Laboratory of Visual Neuroscience, Graduate Course in Biological Sciences, Iwate University Division of Science and Engineering, 4-3-5 Ueda, Morioka, Iwate 020-8551 (Japan); Sugano, Eriko, E-mail: sseriko@iwate-u.ac.jp [Laboratory of Visual Neuroscience, Graduate Course in Biological Sciences, Iwate University Division of Science and Engineering, 4-3-5 Ueda, Morioka, Iwate 020-8551 (Japan); Soft-Path Engineering Research Center (SPERC), Faculty of Science and Engineering, Iwate University, Morioka 020-8551 (Japan)

    2016-05-13

    The transcription factor nuclear factor kappaB (NF-κB) plays various roles in cell survival, apoptosis, and inflammation. In the rat retina, NF-κB activity increases after exposure to damaging light, resulting in degeneration of photoreceptors. Here, we report that in dark-adapted rats exposed for 6 h to bright white light, the p65 subunit of retinal NF-κB translocates to the mitochondria, an event associated with a decrease in expression of cytochrome c oxidase subunit III (COX III). However, sustained exposure for 12 h depleted p65 from the mitochondria, and enhanced COX III expression. Treatment with the protective antioxidant PBN prior to light exposure prevents p65 depletion in the mitochondria and COX III upregulation during prolonged exposure, and apoptosis in photoreceptor cells. These results indicate that COX III expression is sensitive to the abundance of NF-κB p65 in the mitochondria, which, in turn, is affected by exposure to damaging light. - Highlights: • Damaging light exposure of the retina induces NF-κB p65 mitochondrial translocation. • NF-κB p65 mitochondrial translocation is associated with the decrease of COX III expression. • Prolonged light exposure depletes mitochondrial p65 resulting in the increase in COX III expression. • NF-κB p65 and COX III expression play an important role in the light-induced photoreceptor degeneration.