WorldWideScience

Sample records for temperature-invariant casimir-polder forces

  1. A microscopic approach to Casimir and Casimir-Polder forces between metallic bodies

    Science.gov (United States)

    Barcellona, Pablo; Passante, Roberto

    2015-04-01

    We consider the Casimir-Polder interaction energy between a metallic nanoparticle and a metallic plate, as well as the Casimir interaction energy between two macroscopic metal plates, in terms of the many-body dispersion interactions between their constituents. Expressions for two- and three-body dispersion interactions between the microscopic parts of a real metal are first obtained, both in the retarded and non-retarded limits. These expressions are then used to evaluate the overall two- and three-body contributions to the macroscopic Casimir-Polder and Casimir force, and to compare them with each other, for the two following geometries: metal nanoparticle/half-space and half-space/half-space, where all the materials are assumed perfect conductors. The above evaluation is obtained by summing up the contributions from the microscopic constituents of the bodies (metal nanoparticles). In the case of nanoparticle/half-space, our results fully agree with those that can be extracted from the corresponding macroscopic results, and explicitly show the non-applicability of the pairwise approximation for the geometry considered. In both cases, we find that, while the overall two-body contribution yields an attractive force, the overall three-body contribution is repulsive. Also, they turn out to be of the same order, consistently with the known non applicability of the pairwise approximation. The issue of the rapidity of convergence of the many-body expansion is also briefly discussed.

  2. Lateral Casimir-Polder forces by breaking time-reversal symmetry

    Science.gov (United States)

    Oude Weernink, Ricardo R. Q. P. T.; Barcellona, Pablo; Buhmann, Stefan Yoshi

    2018-03-01

    We examine the lateral Casimir-Polder force acting on a circular rotating emitter near a dielectric plane surface. As the circular motion breaks time-reversal symmetry, the spontaneous emission in a direction parallel to the surface is in general anisotropic. We show that a lateral force arises which can be interpreted as a recoil force because of this asymmetric emission. The force is an oscillating function of the distance between the emitter and the surface, and the lossy character of the dielectric strongly influences the results in the near-field regime. The force exhibits also a population-induced dynamics, decaying exponentially with respect to time on time scales of the inverse of the spontaneous decay rate. We propose that this effect could be detected measuring the velocity acquired by the emitter, following different cycles of excitation and spontaneous decay. Our results are expressed in terms of the Green's tensor and can therefore easily be applied to more complex geometries.

  3. Thermal Casimir-Polder forces on a V-type three-level atom

    Science.gov (United States)

    Xu, Chen-Ran; Xu, Jing-Ping; Al-amri, M.; Zhu, Cheng-Jie; Xie, Shuang-Yuan; Yang, Ya-Ping

    2017-09-01

    We study the thermal Casimir-Polder (CP) forces on a V-type three-level atom. The competition between the thermal effect and the quantum interference of the two transition dipoles on the force is investigated. To shed light onto the role of the quantum interference, we analyze two kinds of initial states of the atom, i.e., the superradiant state and the subradiant state. Considering the atom being in the thermal reservoir, the resonant CP force arising from the real photon emission dominates in the evolution of the CP force. Under the zero-temperature condition, the quantum interference can effectively modify the amplitude and the evolution of the force, leading to a long-time force or even the cancellation of the force. Our results reveal that in the finite-temperature case, the thermal photons can enhance the amplitude of all force elements, but have no influence on the net resonant CP force in the steady state, which means that the second law of thermodynamics still works. For the ideal degenerate V-type atom with parallel dipoles under the initial subradiant state, the robust destructive quantum interference overrides the thermal fluctuations, leading to the trapping of the atom in the subradiant state and the disappearance of the CP force. However, in terms of a realistic Zeeman atom, the thermal photons play a significant role during the evolution of the CP force. The thermal fluctuations can enhance the amplitude of the initial CP force by increasing the temperature, and weaken the influence of the quantum interference on the evolution of the CP force from the initial superradiant (subradiant) state to the steady state.

  4. Dispersion forces in micromechanics: Casimir and Casimir-Polder forces affected by geometry and non-zero temperature

    Energy Technology Data Exchange (ETDEWEB)

    Ellingsen, Simen Andreas Aadnoey

    2011-01-15

    The present thesis focuses on several topics within three separate but related branches of the overall field of dispersion forces. The three branches are: temperature corrections to the Casimir force between real materials (Part 1), explicit calculation of Casimir energy in wedge geometries (Part 2), and Casimir-Polder forces on particles out of thermal equilibrium (Part 3). Part 1 deals primarily with analysis of a previously purported thermodynamic inconsistency in the Casimir-Lifshitz free energy of the interaction of two plane mirrors - violation of the third law of thermodynamics - when the latter's dielectric response is described with dissipative models. It is shown analytically and numerically that the Casimir entropy of the interaction between two metallic mirrors described by the Drude model does tend to zero at zero temperature, provided electronic relaxation does not vanish. The leading order terms at low temperature are found. A similar calculation is carried out for the interaction of semiconductors with small but non-zero DC conductivity. In a generalisation, it is shown that a violation of the third law can only occur for permittivities whose low-frequency behaviour is temperature dependent near zero temperature. A calculation using path integral methods shows that the low temperature behaviour of the interaction of fluctuating Foucault currents in two mirrors of Drude metal is identical to that of the full Casimir-Lifshitz free energy, reasserting a previous finding by Intravaia and Henkel that such fluctuating bulk currents are the physical reason for the anomalous entropy behaviour. In a related effort, an analysis of the frequency dependence of the Casimir force by Ford is generalised to imperfectly reflecting mirrors. A paradox is pointed out, in that the effects of a perturbation of the reflecting properties of the mirrors in a finite frequency window can be calculated in two ways giving different results. It is concluded that optimistic

  5. Fermions on the low-buckled honey-comb structured lattice plane and classical Casimir-Polder force

    Science.gov (United States)

    Goswami, Partha

    2016-05-01

    We start with the well-known expression for the vacuum polarization and suitably modify it for 2+1-dimensional spin-orbit coupled (SOC) fermions on the low-buckled honey-comb structured lattice plane described by the low-energy Liu-Yao-Feng-Ezawa (LYFE) model Hamiltonian involving the Dirac matrices in the chiral representation obeying the Clifford algebra. The silicene and germanene fit this description suitably. They have the Dirac cones similar to those of graphene and SOC is much stronger. The system could be normal or ferromagnetic in nature. The silicene turns into the latter type if there is exchange field arising due to the proximity coupling to a ferromagnet (FM) such as depositing Fe atoms to the silicene surface. For the silicene, we find that the many-body effects considerably change the bare Coulomb potential by way of the dependence of the Coulomb propagator on the real-spin, iso-spin and the potential due to an electric field applied perpendicular to the silicene plane. The computation aspect of the Casimir-Polder force (CPF) needs to be investigated in this paper. An important quantity in this process is the dielectric response function (DRF) of the material. The plasmon branch was obtained by finding the zeros of DRF in the long-wavelength limit. This leads to the plasmon frequencies. We find that the collective charge excitations at zero doping, i.e., intrinsic plasmons, in this system, are absent in the Dirac limit. The valley-spin-split intrinsic plasmons, however, come into being in the case of the massive Dirac particles with characteristic frequency close to 10 THz. Our scheme to calculate the Casimir-Polder interaction (CPI) of a micro-particle with a sheet involves replacing the dielectric constant of the sample in the CPI expression obtained on the basis of the Lifshitz theory by the static DRF obtained using the expressions for the polarization function we started with. Though the approach replaces a macroscopic constant by a microscopic

  6. Gravitational Casimir-Polder effect

    Science.gov (United States)

    Hu, Jiawei; Yu, Hongwei

    2017-04-01

    The interaction due to quantum gravitational vacuum fluctuations between a gravitationally polarizable object modelled as a two-level system and a gravitational boundary is investigated. This quantum gravitational interaction is found to be position-dependent, which induces a force in close analogy to the Casimir-Polder force in the electromagnetic case. For a Dirichlet boundary, the quantum gravitational potential for the polarizable object in its ground-state is shown to behave like z-5 in the near zone, and z-6 in the far zone, where z is the distance to the boundary. For a concrete example, where a Bose-Einstein condensate is taken as a gravitationally polarizable object, the relative correction to the radius of the BEC caused by fluctuating quantum gravitational waves in vacuum is found to be of order 10-21. Although the correction is far too small to observe in comparison with its electromagnetic counterpart, it is nevertheless of the order of the gravitational strain caused by a recently detected black hole merger on the arms of the LIGO.

  7. Casimir-Polder forces on atoms in the presence of magnetoelectronic bodies

    Energy Technology Data Exchange (ETDEWEB)

    Buhmann, S.Y.

    2007-07-05

    In this work, the CP force between a single neutral atom or molecule and neutral magnetoelectric bodies is studied. The focus lies on the pure vacuum CP force, i.e., the electromagnetic field is in general understood to be in its ground state. Furthermore, we assume that the atom-body separation is sufficiently large to ensure that the atom is adequately characterised as an electric dipole, while the body can be described by its macroscopic magnetoelectric properties; and that repulsive exchange forces due to the overlap between the electronic wave functions of the atom and the bodies can be neglected. Interactions due to non-vanishing net charges, permanent electric dipole moments, magnetisability, quadrupole (or higher multipole) polarisabilities of the atom and those resulting from non-local or anisotropic magnetoelectric properties of the bodies are ignored. (orig.)

  8. Quantum electrodynamics based on self-energy, without second quantization: The Lamb shift and long-range Casimir-Polder van der Waals forces near boundaries

    International Nuclear Information System (INIS)

    Barut, A.O.; Dowling, J.P.

    1986-12-01

    Using a previously formulated theory of quantum electrodynamics based on self-energy, we give a general method for computing the Lamb shift and related Casimir-Polder energies for a quantum system in the vicinity of perfectly conducting boundaries. Our results are exact and easily extendable to a full covariant relativistic form. As a particular example we apply the method to an atom near an infinite conducting plane, and we recover the standard QED results (which are known only in the dipole approximation) in a simple and straightforward manner. This is accomplished in the context of the new theory which is not second quantized and contains no vacuum fluctuations. (author)

  9. Influence of the chemical potential on the Casimir-Polder interaction between an atom and gapped graphene or a graphene-coated substrate

    Science.gov (United States)

    Henkel, C.; Klimchitskaya, G. L.; Mostepanenko, V. M.

    2018-03-01

    We present a formalism based on first principles of quantum electrodynamics at nonzero temperature which permits us to calculate the Casimir-Polder interaction between an atom and a graphene sheet with arbitrary mass gap and chemical potential, including graphene-coated substrates. The free energy and force of the Casimir-Polder interaction are expressed via the polarization tensor of graphene in (2 +1 ) -dimensional space-time in the framework of the Dirac model. The obtained expressions are used to investigate the influence of the chemical potential of graphene on the Casimir-Polder interaction. Computations are performed for an atom of metastable helium interacting with either a freestanding graphene sheet or a graphene-coated substrate made of amorphous silica. It is shown that the impacts of the nonzero chemical potential and the mass gap on the Casimir-Polder interaction are in opposite directions, by increasing and decreasing the magnitudes of the free energy and force, respectively. It turns out, however, that the temperature-dependent part of the Casimir-Polder interaction is decreased by a nonzero chemical potential, whereas the mass gap increases it compared to the case of undoped, gapless graphene. The physical explanation for these effects is provided. Numerical computations of the Casimir-Polder interaction are performed at various temperatures and atom-graphene separations.

  10. Casimir-Polder interaction in second quantization

    Energy Technology Data Exchange (ETDEWEB)

    Schiefele, Juergen

    2011-03-21

    The Casimir-Polder interaction between a single neutral atom and a nearby surface, arising from the (quantum and thermal) fluctuations of the electromagnetic field, is a cornerstone of cavity quantum electrodynamics (cQED), and theoretically well established. Recently, Bose-Einstein condensates (BECs) of ultracold atoms have been used to test the predictions of cQED. The purpose of the present thesis is to upgrade single-atom cQED with the many-body theory needed to describe trapped atomic BECs. Tools and methods are developed in a second-quantized picture that treats atom and photon fields on the same footing. We formulate a diagrammatic expansion using correlation functions for both the electromagnetic field and the atomic system. The formalism is applied to investigate, for BECs trapped near surfaces, dispersion interactions of the van der Waals-Casimir-Polder type, and the Bosonic stimulation in spontaneous decay of excited atomic states. We also discuss a phononic Casimir effect, which arises from the quantum fluctuations in an interacting BEC. (orig.)

  11. Casimir-Polder interaction in second quantization

    International Nuclear Information System (INIS)

    Schiefele, Juergen

    2011-01-01

    The Casimir-Polder interaction between a single neutral atom and a nearby surface, arising from the (quantum and thermal) fluctuations of the electromagnetic field, is a cornerstone of cavity quantum electrodynamics (cQED), and theoretically well established. Recently, Bose-Einstein condensates (BECs) of ultracold atoms have been used to test the predictions of cQED. The purpose of the present thesis is to upgrade single-atom cQED with the many-body theory needed to describe trapped atomic BECs. Tools and methods are developed in a second-quantized picture that treats atom and photon fields on the same footing. We formulate a diagrammatic expansion using correlation functions for both the electromagnetic field and the atomic system. The formalism is applied to investigate, for BECs trapped near surfaces, dispersion interactions of the van der Waals-Casimir-Polder type, and the Bosonic stimulation in spontaneous decay of excited atomic states. We also discuss a phononic Casimir effect, which arises from the quantum fluctuations in an interacting BEC. (orig.)

  12. Tailoring optical metamaterials to tune the atom-surface Casimir-Polder interaction.

    Science.gov (United States)

    Chan, Eng Aik; Aljunid, Syed Abdullah; Adamo, Giorgio; Laliotis, Athanasios; Ducloy, Martial; Wilkowski, David

    2018-02-01

    Metamaterials are fascinating tools that can structure not only surface plasmons and electromagnetic waves but also electromagnetic vacuum fluctuations. The possibility of shaping the quantum vacuum is a powerful concept that ultimately allows engineering the interaction between macroscopic surfaces and quantum emitters such as atoms, molecules, or quantum dots. The long-range atom-surface interaction, known as Casimir-Polder interaction, is of fundamental importance in quantum electrodynamics but also attracts a significant interest for platforms that interface atoms with nanophotonic devices. We perform a spectroscopic selective reflection measurement of the Casimir-Polder interaction between a Cs(6P 3/2 ) atom and a nanostructured metallic planar metamaterial. We show that by engineering the near-field plasmonic resonances of the metamaterial, we can successfully tune the Casimir-Polder interaction, demonstrating both a strong enhancement and reduction with respect to its nonresonant value. We also show an enhancement of the atomic spontaneous emission rate due to its coupling with the evanescent modes of the nanostructure. Probing excited-state atoms next to nontrivial tailored surfaces is a rigorous test of quantum electrodynamics. Engineering Casimir-Polder interactions represents a significant step toward atom trapping in the extreme near field, possibly without the use of external fields.

  13. Dependence of the Casimir-Polder interaction between an atom and a cavity wall on atomic and material properties

    International Nuclear Information System (INIS)

    Mostepanenko, V M; Babb, J F; Caride, A O; Klimchitskaya, G L; Zanette, S I

    2006-01-01

    The Casimir-Polder and van der Waals interactions between an atom and a flat cavity wall are investigated under the influence of real conditions including the dynamic polarizability of the atom, actual conductivity of the wall material and nonzero temperature of the wall. The cases of different atoms near metal and dielectric walls are considered. It is shown that to obtain accurate results for the atom-wall interaction at short separations, one should use the complete tabulated optical data for the complex refractive index of the wall material and the accurate dynamic polarizability of an atom. At relatively large separations in the case of a metal wall, one may use the plasma model dielectric function to describe the dielectric properties of the wall material. The obtained results are important for the theoretical interpretation of experiments on quantum reflection and Bose-Einstein condensation

  14. Repulsive vacuum-induced forces on a magnetic particle

    Science.gov (United States)

    Sinha, Kanupriya

    2018-03-01

    We study the possibility of obtaining a repulsive vacuum-induced force for a magnetic point particle near a surface. Considering the toy model of a particle with an electric-dipole transition and a large magnetic spin, we analyze the interplay between the repulsive magnetic-dipole and the attractive electric-dipole contributions to the total Casimir-Polder force. Particularly noting that the magnetic-dipole interaction is longer ranged than the electric dipole due to the difference in their respective characteristic transition frequencies, we find a regime where the repulsive magnetic contribution to the total force can potentially exceed the attractive electric part in magnitude for a sufficiently large spin. We analyze ways to further enhance the magnitude of the repulsive magnetic Casimir-Polder force for an excited particle, such as by preparing it in a "super-radiant" magnetic sublevel and designing surface resonances close to the magnetic transition frequency.

  15. Fluctuation-induced forces on an atom near a photonic topological material

    Science.gov (United States)

    Silveirinha, Mário G.; Gangaraj, S. Ali Hassani; Hanson, George W.; Antezza, Mauro

    2018-02-01

    We theoretically study the Casimir-Polder force on an atom in an arbitrary initial state in a rather general electromagnetic environment wherein the materials may have a nonreciprocal bianisotropic dispersive response. It is shown that under the Markov approximation the force has resonant and nonresonant contributions. We obtain explicit expressions for the optical force both in terms of the system Green function and of the electromagnetic modes. We apply the theory to the particular case wherein a two-level system interacts with a topological gyrotropic material, showing that the nonreciprocity enables exotic light-matter interactions and the opportunity to sculpt and tune the Casimir-Polder forces on the nanoscale. With a quasistatic approximation, we obtain a simple analytical expression for the optical force and unveil the crucial role of surface plasmons in fluctuation-induced forces. Finally, we derive the Green function for a gyrotropic material half-space in terms of a Sommerfeld integral.

  16. Quantum and classical vacuum forces at zero and finite temperature; Quantentheoretische und klassische Vakuum-Kraefte bei Temperatur Null und bei endlicher Temperatur

    Energy Technology Data Exchange (ETDEWEB)

    Niekerken, Ole

    2009-06-15

    In this diploma thesis the Casimir-Polder force at zero temperature and at finite temperatures is calculated by using a well-defined quantum field theory (formulated in position space) and the method of image charges. For the calculations at finite temperature KMS-states are used. The so defined temperature describes the temperature of the electromagnetic background. A one oscillator model for inhomogeneous dispersive absorbing dielectric material is introduced and canonically quantized to calculate the Casimir-Polder force at a dielectric interface at finite temperature. The model fulfils causal commutation relations and the dielectric function of the model fulfils the Kramer-Kronig relations. We then use the same methods to calculate the van der Waals force between two neutral atoms at zero temperature and at finite temperatures. It is shown that the high temperature behaviour of the Casimir-Polder force and the van der Waals force are independent of {Dirac_h}. This means that they have to be understood classically, what is then shown in an algebraic statistical theory by using classical KMS states. (orig.)

  17. Quantum Gravitational Force Between Polarizable Objects

    Science.gov (United States)

    Ford, L. H.; Hertzberg, Mark P.; Karouby, J.

    2016-04-01

    Since general relativity is a consistent low energy effective field theory, it is possible to compute quantum corrections to classical forces. Here we compute a quantum correction to the gravitational potential between a pair of polarizable objects. We study two distant bodies and compute a quantum force from their induced quadrupole moments due to two-graviton exchange. The effect is in close analogy to the Casimir-Polder and London-van der Waals forces between a pair of atoms from their induced dipole moments due to two photon exchange. The new effect is computed from the shift in vacuum energy of metric fluctuations due to the polarizability of the objects. We compute the potential energy at arbitrary distances compared to the wavelengths in the system, including the far and near regimes. In the far distance, or retarded, regime, the potential energy takes on a particularly simple form: V (r )=-3987 ℏc G2α1 Sα2 S/(4 π r11) , where α1 S , α2 S are the static gravitational quadrupole polarizabilities of each object. We provide estimates of this effect.

  18. Nonequilibrium forces between neutral atoms mediated by a quantum field

    International Nuclear Information System (INIS)

    Behunin, Ryan O.; Hu, Bei-Lok

    2010-01-01

    We study forces between two neutral atoms, modeled as three-dimensional harmonic oscillators, arising from mutual influences mediated by an electromagnetic field but not from their direct interactions. We allow as dynamical variables the center-of-mass motion of the atom, its internal degrees of freedom, and the quantum field treated relativistically. We adopt the method of nonequilibrium quantum field theory which can provide a first-principles, systematic, and unified description including the intrinsic and induced dipole fluctuations. The inclusion of self-consistent back-actions makes possible a fully dynamical description of these forces valid for general atom motion. In thermal equilibrium we recover the known forces--London, van der Waals, and Casimir-Polder--between neutral atoms in the long-time limit. We also reproduce a recently reported force between atoms when the system is out of thermal equilibrium at late times. More noteworthy is the discovery of the existence of a type of (or identification of the source of some known) interatomic force which we call the ''entanglement force,'' originating from the quantum correlations of the internal degrees of freedom of entangled atoms.

  19. Resonance energy transfer and interface forces: quantum electrodynamical analysis

    Science.gov (United States)

    Bradshaw, David S.; Leeder, Jamie M.; Rodríguez, Justo; Andrews, David L.

    2007-01-01

    On the propagation of radiation with a suitably resonant optical frequency through a dense chromophoric system - a doped solid for example - photon capture is commonly followed by one or more near-field transfers of the resulting optical excitation, usually to closely neighboring chromophores. Since the process results in a change to the local electronic environment, it can be expected to also shift the electromagnetic interactions between the participant optical units, producing modified inter-particle forces. Significantly, it emerges that energy transfer, when it occurs between chromophores or particles with electronically dissimilar properties (such as differing polarizabilities), engenders hitherto unreported changes in the local potential energy landscape. This paper reports the results of quantum electrodynamical calculations which cast a new light on the physical link between these features. The theory also elucidates a significant relationship with Casimir-Polder forces; it transpires that there are clear and fundamental links between dispersion forces and resonance energy transfer. Based on the results, we highlight specific effects that can be anticipated when laser light propagates through an interface between two absorbing media. Both steady-state and pulsed excitation conditions are modeled and the consequences for interface forces are subjected to detailed analysis.

  20. Force

    CERN Document Server

    Graybill, George

    2007-01-01

    Forces are at work all around us. Discover what a force is, and different kinds of forces that work on contact and at a distance. We use simple language and vocabulary to make this invisible world easy for students to ""see"" and understand. Examine how forces ""add up"" to create the total force on an object, and reinforce concepts and extend learning with sample problems.

  1. Spin Entanglement Witness for Quantum Gravity

    Science.gov (United States)

    Bose, Sougato; Mazumdar, Anupam; Morley, Gavin W.; Ulbricht, Hendrik; Toroš, Marko; Paternostro, Mauro; Geraci, Andrew A.; Barker, Peter F.; Kim, M. S.; Milburn, Gerard

    2017-12-01

    Understanding gravity in the framework of quantum mechanics is one of the great challenges in modern physics. However, the lack of empirical evidence has lead to a debate on whether gravity is a quantum entity. Despite varied proposed probes for quantum gravity, it is fair to say that there are no feasible ideas yet to test its quantum coherent behavior directly in a laboratory experiment. Here, we introduce an idea for such a test based on the principle that two objects cannot be entangled without a quantum mediator. We show that despite the weakness of gravity, the phase evolution induced by the gravitational interaction of two micron size test masses in adjacent matter-wave interferometers can detectably entangle them even when they are placed far apart enough to keep Casimir-Polder forces at bay. We provide a prescription for witnessing this entanglement, which certifies gravity as a quantum coherent mediator, through simple spin correlation measurements.

  2. From optical lattice clocks to the measurement of forces in the Casimir regime

    International Nuclear Information System (INIS)

    Wolf, Peter; Lemonde, Pierre; Bize, Sebastien; Landragin, Arnaud; Clairon, Andre; Lambrecht, Astrid

    2007-01-01

    We describe an experiment based on atoms trapped close to a macroscopic surface, to study the interactions between the atoms and the surface at very small separations (0.6-10 μm). In this range the dominant potential is the QED interaction (Casimir-Polder and van der Waals) between the surface and the atom. Additionally, several theoretical models suggest the possibility of Yukawa-type potentials with sub-millimeter range, arising from new physics related to gravity. The proposed setup is very similar to neutral atom optical lattice clocks, but with the atoms trapped in lattice sites close to the reflecting mirror. A sequence of pulses of the probe laser at different frequencies is then used to create an interferometer with a coherent superposition between atomic states at different distances from the mirror (in different lattice sites). Assuming atom interferometry state-of-the-art measurement of the phase difference and a duration of the superposition of about 0.1 s, we expect to be able to measure the potential difference between separated states with an uncertainty of ≅10 -4 Hz. An analysis of systematic effects for different atoms and surfaces indicates no fundamentally limiting effect at the same level of uncertainty, but does influence the choice of atom and surface material. Based on those estimates, we expect that such an experiment would improve the best existing measurements of the atom-wall QED interaction by ≥ 2 orders of magnitude, while gaining up to four orders of magnitude on the best present limits on new interactions in the range between 100 nm and 100 μm

  3. Radiation Tolerant Temperature-Invariant Scintillation Modules, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Radiation detectors are an invaluable tool for space applications spanning planetary science, astrophysics, heliophysics, space weather, and dosimetry for human...

  4. Temperature-Invariant Aqueous Microgels as Hosts for Biomacromolecules.

    Science.gov (United States)

    Mastour Tehrani, Sepehr; Lu, Yijie; Guerin, Gerald; Soleimani, Mohsen; Pichugin, Dmitry; Winnik, Mitchell A

    2015-10-12

    Immobilization of enzymes on solid supports has been widely used to improve enzyme recycling, enzyme stability, and performance. We are interested in using aqueous microgels (colloidal hydrogels) as carriers for enzymes used in high-temperature reactions. These microgels should maintain their volume and colloidal stability in aqueous media up to 100 °C to serve as thermo-stable supports for enzymes. For this purpose, we prepared poly(N-hydroxyethyl acrylamide) (PHEAA) microgels via a two-step synthesis. First, we used precipitation polymerization in water to synthesize colloidal poly(diethylene glycol-ethyl ether acrylate) (PDEGAC) particles as a precursor. PDEGAC forms solvent swollen microgels in organic solvents such as methanol and dioxane and in water at temperatures below 15 °C. In the second step, these PDEGAC particles were transformed to PHEAA microgels through aminolysis in dioxane with ethanolamine and a small amount of ethylenediamine. Dynamic laser scattering studies confirmed that the colloidal stability of microgels was maintained during the aminolysis in dioxane and subsequent transfer to water. Characterization of the PHEAA microgels indicated about 9 mol % of primary amino groups. These provide functionality for bioconjugation. As proof-of-concept experiments, we attached the enzyme horseradish peroxidase (HRP) to these aqueous microgels through (i) N-(3-(dimethylamino)propyl)-N'-ethylcarbodiimide hydrochloride (EDC) coupling to the carboxylated microgels or (ii) bis-aryl hydrazone (BAH) coupling to microgels functionalized with 6-hydrazinonicotinate acetone (PHEAA-HyNic). Our results showed that HRP maintained its catalytic activity after covalent attachment (87% for EDC coupling, 96% for BAH coupling). The microgel enhanced the stability of the enzyme to thermal denaturation. For example, the residual activity of the microgel-supported enzyme was 76% after 330 min of annealing at 50 °C, compared to only 20% for the free enzyme under these conditions. PHEAA microgels in water show great promise as hosts for enzymatic reaction, especially at elevated temperatures.

  5. Labor Force

    Science.gov (United States)

    Occupational Outlook Quarterly, 2012

    2012-01-01

    The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

  6. Dispersion Forces

    CERN Document Server

    Buhmann, Stefan Yoshi

    2012-01-01

    In this book, a modern unified theory of dispersion forces on atoms and bodies is presented which covers a broad range of advanced aspects and scenarios. Macroscopic quantum electrodynamics is shown to provide a powerful framework for dispersion forces which allows for discussing general properties like their non-additivity and the relation between microscopic and macroscopic interactions. It is demonstrated how the general results can be used to obtain dispersion forces on atoms in the presence of bodies of various shapes and materials. Starting with a brief recapitulation of volume I, this volume II deals especially with bodies of irregular shapes, universal scaling laws, dynamical forces on excited atoms, enhanced forces in cavity quantum electrodynamics, non-equilibrium forces in thermal environments and quantum friction. The book gives both the specialist and those new to the field a thorough overview over recent results in the field. It provides a toolbox for studying dispersion forces in various contex...

  7. Forced marriage.

    Science.gov (United States)

    2007-06-01

    Guidelines to help A&E staff and other healthcare professionals who suspect cases of forced marriage were launched this month by the government. The guidelines provide practical advice on how to recognise the warning signs, and what to do if patients disclose that they have been, or are about to be, forced to marry. The guidelines, Dealing with Cases of Forced Marriage, are available at www.fco.gov.uk/forcedmarriage.

  8. Different forces

    CERN Multimedia

    1982-01-01

    The different forces, together with a pictorial analogy of how the exchange of particles works. The table lists the relative strength of the couplings, the quanta associated with the force fields and the bodies or phenomena in which they have a dominant role.

  9. Interaction of a charge with a thin plasma sheet

    International Nuclear Information System (INIS)

    Bordag, M.

    2007-01-01

    The interaction of the electromagnetic field with a two-dimensional plasma sheet intended to describe the pi-electrons of a carbon nanotube or a C 60 molecule is investigated. By first integrating out the displacement field of the plasma or the electromagnetic field, different representations for quantities like the Casimir energy are derived which are shown to be consistent with one another. Starting from the covariant gauge for the electromagnetic field, it is shown that the matching conditions to which the presence of the plasma sheet can be reduced are different from the commonly used ones. The difference in the treatments does not show up in the Casimir force between two parallel sheets, but it is present in the Casimir-Polder force between a charge or a neutral atom and a sheet. At once, since the plasma sheet is a regularization of the conductor boundary conditions, this sheds light on the difference in physics found earlier in the realization of conductor boundary conditions as 'thin' or 'thick' boundary conditions in Phys. Rev. D 70, 085010 (2004)

  10. Cluster forcing

    DEFF Research Database (Denmark)

    Christensen, Thomas Budde

    , Portugal and New Zealand have adopted the concept. Public sector interventions that aim to support cluster development in industries most often focus upon economic policy goals such as enhanced employment and improved productivity, but rarely emphasise broader societal policy goals relating to e.......g. sustainability or quality of life. The purpose of this paper is to explore how and to what extent public sector interventions that aim at forcing cluster development in industries can support sustainable development as defined in the Brundtland tradition and more recently elaborated in such concepts as eco...... in 2000 by the Welsh Automotive Task Force under the Welsh Assembly Government. The Accelerate programme takes basically different two directions: The first one, which was the first to be launched, is concerned with the upgrading of existing supply chains in the automotive industry in Wales. The programme...

  11. Laser heating of scanning probe tips for thermal near-field spectroscopy and imaging

    Directory of Open Access Journals (Sweden)

    Brian T. O’Callahan

    2017-02-01

    Full Text Available Spectroscopy and microscopy of the thermal near-field yield valuable insight into the mechanisms of resonant near-field heat transfer and Casimir and Casimir-Polder forces, as well as providing nanoscale spatial resolution for infrared vibrational spectroscopy. A heated scanning probe tip brought close to a sample surface can excite and probe the thermal near-field. Typically, tip temperature control is provided by resistive heating of the tip cantilever. However, this requires specialized tips with limited temperature range and temporal response. By focusing laser radiation onto AFM cantilevers, we achieve heating up to ∼1800 K, with millisecond thermal response time. We demonstrate application to thermal infrared near-field spectroscopy (TINS by acquiring near-field spectra of the vibrational resonances of silicon carbide, hexagonal boron nitride, and polytetrafluoroethylene. We discuss the thermal response as a function of the incident excitation laser power and model the dominant cooling contributions. Our results provide a basis for laser heating as a viable approach for TINS, nanoscale thermal transport measurements, and thermal desorption nano-spectroscopy.

  12. Coriolis Force

    Science.gov (United States)

    Marciuc, Daly; Solschi, Viorel

    2017-04-01

    Understanding the Coriolis effect is essential for explaining the movement of air masses and ocean currents. The lesson we propose aims to familiarize students with the manifestation of the Coriolis effect. Students are guided to build, using the GeoGebra software, a simulation of the motion of a body, related to a rotating reference system. The mathematical expression of the Coriolis force is deduced, for particular cases, and the Foucault's pendulum is presented and explained. Students have the opportunity to deepen the subject, by developing materials related to topics such as: • Global Wind Pattern • Ocean Currents • Coriolis Effect in Long Range Shooting • Finding the latitude with a Foucault Pendulum

  13. Joining Forces

    DEFF Research Database (Denmark)

    Christiansen, Anne Mette

    2013-01-01

    The interest in Corporate Social Responsibility (CSR) has grown dramatically over the last three years in Greenland. A vast geographical area with a tiny population, Greenland has recently obtained self-government status and is going through a rapid development economically and socially...... as the country moves towards embracing extractive industries (oil, gas and mining) as a path to development. Both government, civil society and business are increasingly looking for new and innovative ways of joining forces across sectors to solve some of the country's many critical social issues. Greenlandic...... companies have over the last 23 years embraced the concept of strategic CSR and are increasingly engaging in cross-sector partnerships as part of their CSR strategy. The partnerships take different forms both in regards to number of partners, focus areas and level of strategic engagement. In the article...

  14. Handbook of force transducers

    CERN Document Server

    Stefanescu, Dan Mihai

    2011-01-01

    Part I introduces the basic ""Principles and Methods of Force Measurement"" acording to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the ""(Strain Gauge) Force Transducers Components"", evolving from the classical force transducer to the digital / intelligent one, with the inco

  15. Spectral design of temperature-invariant narrow bandpass filters for the mid-infrared

    DEFF Research Database (Denmark)

    Stolberg-Rohr, Thomine Kirstine; Hawkins, Gary J.

    2015-01-01

    The ability of narrow bandpass filters to discriminatewavelengths between closely-separated gas absorption lines is crucial inmany areas of infrared spectroscopy. As improvements to the sensitivity ofinfrared detectors enables operation in uncontrolled high-temperature environments, this imposes ...

  16. StringForce

    DEFF Research Database (Denmark)

    Barendregt, Wolmet; Börjesson, Peter; Eriksson, Eva

    2017-01-01

    In this paper, we present the forced collaborative interaction game StringForce. StringForce is developed for a special education context to support training of collaboration skills, using readily available technologies and avoiding the creation of a "mobile bubble". In order to play StringForce ...

  17. Interfacial force measurements using atomic force microscopy

    NARCIS (Netherlands)

    Chu, L.

    2018-01-01

    Atomic Force Microscopy (AFM) can not only image the topography of surfaces at atomic resolution, but can also measure accurately the different interaction forces, like repulsive, adhesive and lateral existing between an AFM tip and the sample surface. Based on AFM, various extended techniques have

  18. Labor Force Participation Rate

    Data.gov (United States)

    City and County of Durham, North Carolina — This thematic map presents the labor force participation rate of working-age people in the United States in 2010. The 2010 Labor Force Participation Rate shows the...

  19. Aerodynamic Lifting Force.

    Science.gov (United States)

    Weltner, Klaus

    1990-01-01

    Describes some experiments showing both qualitatively and quantitatively that aerodynamic lift is a reaction force. Demonstrates reaction forces caused by the acceleration of an airstream and the deflection of an airstream. Provides pictures of demonstration apparatus and mathematical expressions. (YP)

  20. Acoustic force spectroscopy

    NARCIS (Netherlands)

    Sitters, G.; Kamsma, D.; Thalhammer, G.; Ritsch-Marte, M.; Peterman, E.J.G.; Wuite, G.J.L.

    2015-01-01

    Force spectroscopy has become an indispensable tool to unravel the structural and mechanochemical properties of biomolecules. Here we extend the force spectroscopy toolbox with an acoustic manipulation device that can exert forces from subpiconewtons to hundreds of piconewtons on thousands of

  1. Forces in General Relativity

    Science.gov (United States)

    Ridgely, Charles T.

    2010-01-01

    Many textbooks dealing with general relativity do not demonstrate the derivation of forces in enough detail. The analyses presented herein demonstrate straightforward methods for computing forces by way of general relativity. Covariant divergence of the stress-energy-momentum tensor is used to derive a general expression of the force experienced…

  2. Statistics of force networks

    Science.gov (United States)

    Tighe, Brian

    2009-03-01

    We study the statistics of contact forces in the force network ensemble, a minimal model of jammed granular media that emphasizes the role of vector force balance. We show that the force probability distribution can be calculated analytically by way of an analogy to equilibrium ensemble methods. In two dimensions the large force tail decays asymptotically as a Gaussian, distinct from earlier predictions, due to the existence of a conserved quantity related to the presence of local vector force balance. We confirm our predictions with highly accurate statistical sampling -- we sample the force distribution over more than 40 decades -- permitting unambiguous confrontation of theory with numerics. We show how the conserved quantity arises naturally within the context of any constant stress ensemble.

  3. Quantum fictitious forces

    DEFF Research Database (Denmark)

    Bialynicki-Birula, I; Cirone, M.A.; Dahl, Jens Peder

    2002-01-01

    We present Heisenberg's equation of motion for the radial variable of a free non-relativistic particle in D dimensions. The resulting radial force consists of three contributions: (i) the quantum fictitious force which is either attractive or repulsive depending on the number of dimensions, (ii......) a singular quantum force located at the origin, and (iii) the centrifugal force associated with non-vanishing angular momentum. Moreover, we use Heisenberg's uncertainty relation to introduce a lower bound for the kinetic energy of an ensemble of neutral particles. This bound is quadratic in the number...... of atoms and can be traced back to the repulsive quantum fictitious potential. All three forces arise for a free particle: "Force without force"....

  4. Relativistic Linear Restoring Force

    Science.gov (United States)

    Clark, D.; Franklin, J.; Mann, N.

    2012-01-01

    We consider two different forms for a relativistic version of a linear restoring force. The pair comes from taking Hooke's law to be the force appearing on the right-hand side of the relativistic expressions: d"p"/d"t" or d"p"/d["tau"]. Either formulation recovers Hooke's law in the non-relativistic limit. In addition to these two forces, we…

  5. RSOI: Force Deployment Bottleneck

    National Research Council Canada - National Science Library

    D'Amato, Mark

    1998-01-01

    This study uses The Theory Of Constraints (TOC) management methodology and recent military missions to show that RSOI operations are generally the limiting constraint to force deployment operations...

  6. Bi-Force

    DEFF Research Database (Denmark)

    Sun, Peng; Speicher, Nora K; Röttger, Richard

    2014-01-01

    outperformed existing tools with Bi-Force at least when following the evaluation protocols from Eren et al. Bi-Force is implemented in Java and integrated into the open source software package of BiCluE. The software as well as all used datasets are publicly available at http://biclue.mpi-inf.mpg.de....... of pairwise similarities. We first evaluated the power of Bi-Force to solve dedicated bicluster editing problems by comparing Bi-Force with two existing algorithms in the BiCluE software package. We then followed a biclustering evaluation protocol in a recent review paper from Eren et al. (2013) (A...

  7. Intermolecular and surface forces

    CERN Document Server

    Israelachvili, Jacob N

    2011-01-01

    This reference describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition.· starts fr

  8. Macroscopic forces from supersymmetry

    CERN Document Server

    Dimopoulos, Savas K

    1996-01-01

    We argue that theories in which supersymmetry breaking originates at low energies often contain scalar particles that mediate coherent gravitational strength forces at distances less than a cm. We estimate the strength and range of these forces in several cases. Present limits on such forces are inadequate. However new techniques, such as those based on small cryogenic mechanical oscillators, may improve the present limits by ten orders of magnitude or discover new forces as weak as 1 \\% of gravity at distances down to 40 microns.

  9. Climate forcings and feedbacks

    Science.gov (United States)

    Hansen, James

    1993-01-01

    Global temperature has increased significantly during the past century. Understanding the causes of observed global temperature change is impossible in the absence of adequate monitoring of changes in global climate forcings and radiative feedbacks. Climate forcings are changes imposed on the planet's energy balance, such as change of incoming sunlight or a human-induced change of surface properties due to deforestation. Radiative feedbacks are radiative changes induced by climate change, such as alteration of cloud properties or the extent of sea ice. Monitoring of global climate forcings and feedbacks, if sufficiently precise and long-term, can provide a very strong constraint on interpretation of observed temperature change. Such monitoring is essential to eliminate uncertainties about the relative importance of various climate change mechanisms including tropospheric sulfate aerosols from burning of coal and oil smoke from slash and burn agriculture, changes of solar irradiance changes of several greenhouse gases, and many other mechanisms. The considerable variability of observed temperature, together with evidence that a substantial portion of this variability is unforced indicates that observations of climate forcings and feedbacks must be continued for decades. Since the climate system responds to the time integral of the forcing, a further requirement is that the observations be carried out continuously. However, precise observations of forcings and feedbacks will also be able to provide valuable conclusions on shorter time scales. For example, knowledge of the climate forcing by increasing CFC's relative to the forcing by changing ozone is important to policymakers, as is information on the forcing by CO2 relative to the forcing by sulfate aerosols. It will also be possible to obtain valuable tests of climate models on short time scales, if there is precise monitoring of all forcings and feedbacks during and after events such as a large volcanic eruption

  10. Elementary Particles and Forces.

    Science.gov (United States)

    Quigg, Chris

    1985-01-01

    Discusses subatomic particles (quarks, leptons, and others) revealed by higher accelerator energies. A connection between forces at this subatomic level has been established, and prospects are good for a description of forces that encompass binding atomic nuclei. Colors, fundamental interactions, screening, camouflage, electroweak symmetry, and…

  11. The forces in Nature

    CERN Multimedia

    CERN AC

    1998-01-01

    The different forces, together with a pictorial analogy of how the exchange of particles works. The table lists the relative strength of the couplings, the quanta associated with the force fields and the bodies of phenomena in which they have a dominant role.

  12. Forces in yeast flocculation

    Science.gov (United States)

    El-Kirat-Chatel, Sofiane; Beaussart, Audrey; Vincent, Stéphane P.; Abellán Flos, Marta; Hols, Pascal; Lipke, Peter N.; Dufrêne, Yves F.

    2015-01-01

    In the baker's yeast Saccharomyces cerevisiae, cell-cell adhesion (``flocculation'') is conferred by a family of lectin-like proteins known as the flocculin (Flo) proteins. Knowledge of the adhesive and mechanical properties of flocculins is important for understanding the mechanisms of yeast adhesion, and may help controlling yeast behaviour in biotechnology. We use single-molecule and single-cell atomic force microscopy (AFM) to explore the nanoscale forces engaged in yeast flocculation, focusing on the role of Flo1 as a prototype of flocculins. Using AFM tips labelled with mannose, we detect single flocculins on Flo1-expressing cells, showing they are widely exposed on the cell surface. When subjected to force, individual Flo1 proteins display two distinct force responses, i.e. weak lectin binding forces and strong unfolding forces reflecting the force-induced extension of hydrophobic tandem repeats. We demonstrate that cell-cell adhesion bonds also involve multiple weak lectin interactions together with strong unfolding forces, both associated with Flo1 molecules. Single-molecule and single-cell data correlate with microscale cell adhesion behaviour, suggesting strongly that Flo1 mechanics is critical for yeast flocculation. These results favour a model in which not only weak lectin-sugar interactions are involved in yeast flocculation but also strong hydrophobic interactions resulting from protein unfolding.

  13. OOTW Force Design Tools

    Energy Technology Data Exchange (ETDEWEB)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  14. Forced magnetic reconnection

    Science.gov (United States)

    Vekstein, G.

    2017-10-01

    This is a tutorial-style selective review explaining basic concepts of forced magnetic reconnection. It is based on a celebrated model of forced reconnection suggested by J. B. Taylor. The standard magnetohydrodynamic (MHD) theory of this process has been pioneered by Hahm & Kulsrud (Phys. Fluids, vol. 28, 1985, p. 2412). Here we also discuss several more recent developments related to this problem. These include energetics of forced reconnection, its Hall-mediated regime, and nonlinear effects with the associated onset of the secondary tearing (plasmoid) instability.

  15. Rate of force development

    DEFF Research Database (Denmark)

    Maffiuletti, Nicola A; Aagaard, Per; Blazevich, Anthony J

    2016-01-01

    development and to discuss various methodological considerations inherent to its evaluation for research and clinical purposes. Rate of force development (1) seems to be mainly determined by the capacity to produce maximal voluntary activation in the early phase of an explosive contraction (first 50-75 ms......The evaluation of rate of force development during rapid contractions has recently become quite popular for characterising explosive strength of athletes, elderly individuals and patients. The main aims of this narrative review are to describe the neuromuscular determinants of rate of force...

  16. Objective Force Warrior

    National Research Council Canada - National Science Library

    Shisler, Vernon

    2001-01-01

    This presentation concerns technology aimed at the dismounted soldier, Capstone demonstrations for FY06-07, fielding in the Objective Force time frame, strong interest in a lightweight weapon family...

  17. Packing force data correlations

    International Nuclear Information System (INIS)

    Heiman, S.M.

    1994-01-01

    One of the issues facing valve maintenance personnel today deals with an appropriate methodology for installing and setting valve packing that will minimize leak rates, yet ensure functionality of the the valve under all anticipated operating conditions. Several variables can affect a valve packing's ability to seal, such as packing bolt torque, stem finish, and lubrication. Stem frictional force can be an excellent overall indicator of some of the underlying conditions that affect the sealing characteristics of the packing and the best parameter to use when adjusting the packing. This paper addresses stem friction forces, analytically derives the equations related to these forces, presents a methodology for measuring these forces on valve stems, and attempts to correlate the data directly to the underlying variables

  18. Institutionalizing Security Force Assistance

    National Research Council Canada - National Science Library

    Binetti, Michael R

    2008-01-01

    .... It looks at the manner in which security assistance guidance is developed and executed. An examination of national level policy and the guidance from senior military and civilian leaders highlights the important role of Security Force Assistance...

  19. Hanscom Air Force Base

    Data.gov (United States)

    Federal Laboratory Consortium — MIT Lincoln Laboratory occupies 75 acres (20 acres of which are MIT property) on the eastern perimeter of Hanscom Air Force Base, which is at the nexus of Lexington,...

  20. On the fifth forces

    Science.gov (United States)

    Treder, Hans-Jürgen

    1991-03-01

    We discuss the possibility of “fifth forces” in relativistic gravitation theories of fourth order. The fifth force may be an analog to the “weak forces” in the theories of electroweak interactions.

  1. Bow Crushing Forces

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup

    1996-01-01

    The purpose of these notes is to present a basis for the estimation of the internal collision forces between conventinal merchant vessels and large volume offshore structures in the form of gravity-supported offshore installations and bridges crossing international shipping routes.The main emphasis...... is on the presentation of impact loads on fixed offshore structures due to bow collisions. The crushing forces are determined as functions of vessels size, vessels speed, bow profile, collision angles and eccentric impacts....

  2. Security Force Assistance

    Science.gov (United States)

    2009-05-01

    Group 8-59. Cultures may be individualistic or collectivist in their orientation. An individualist culture is one in which the ties between...relatively little weight on offensive and defensive operations from a U.S. perspective . However, when U.S. forces accompany foreign security forces (FSF) in...precedence when conducting SFA. As a result, the brigade combat team (BCT) may be a supported command from a U.S. perspective as well as acting as

  3. Joint Force Fires Coordination: Towards a Joint Force Answer

    National Research Council Canada - National Science Library

    Fearn, William

    1997-01-01

    .... Components compete for decisive effect not only with each other but with the joint force. The contemporary joint force is confederated, the joint force headquarters a weak arbitration authority...

  4. Forces in strategy formation

    DEFF Research Database (Denmark)

    Steensen, Elmer Fly; Sanchez, Ron

    2008-01-01

    This chapter proposes that organizational strategy formation should be characterized theoretically as a process that is subject to several interacting forces, rather than represented by separate discrete decisionmodels or theoretic perspectives, as is commonly done in the strategic management...... literature. Based on an extensive review of relevant theory and empirical work in strategic decision-making, organizational change theory, cognitive and social psychology, and strategy processes, seven kinds of ''forces'' - rational, imposed, teleological, learning, political, heuristic, and social...... - are identified as interacting in and having significant influence on the strategy formation process. It is further argued that by applying a holistic ''forces-view'' of the significant and interacting influences on strategy formation, we can better understand the dynamics and challenges in managing the process...

  5. Electrochemical force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kalinin, Sergei V.; Jesse, Stephen; Collins, Liam F.; Rodriguez, Brian J.

    2017-01-10

    A system and method for electrochemical force microscopy are provided. The system and method are based on a multidimensional detection scheme that is sensitive to forces experienced by a biased electrode in a solution. The multidimensional approach allows separation of fast processes, such as double layer charging, and charge relaxation, and slow processes, such as diffusion and faradaic reactions, as well as capturing the bias dependence of the response. The time-resolved and bias measurements can also allow probing both linear (small bias range) and non-linear (large bias range) electrochemical regimes and potentially the de-convolution of charge dynamics and diffusion processes from steric effects and electrochemical reactivity.

  6. ForcePAD

    DEFF Research Database (Denmark)

    Lindemann, J.; Damkilde, Lars

    2009-01-01

    ForcePAD is a 2-dimensional finite element application that started as a concept application for finite element modeling. Over the course of 10 years the application has been evolved into an application that is used extensively in both an educational setting as well as a tool for design and engin......ForcePAD is a 2-dimensional finite element application that started as a concept application for finite element modeling. Over the course of 10 years the application has been evolved into an application that is used extensively in both an educational setting as well as a tool for design...

  7. due to Capillary Forces

    Directory of Open Access Journals (Sweden)

    Hassen M. Ouakad

    2009-01-01

    Full Text Available We present modeling and analysis for the static behavior and collapse instabilities of doubly-clamped and cantilever microbeams subjected to capillary forces. These forces can be as a result of a volume of liquid trapped underneath the microbeam during the rinsing and drying process in fabrication. The model considers the microbeam as a continuous medium, the capillary force as a nonlinear function of displacement, and accounts for the mid-plane stretching and geometric nonlinearities. The capillary force is assumed to be distributed over a specific length underneath the microbeam. The Galerkin procedure is used to derive a reduced-order model consisting of a set of nonlinear algebraic and differential equations that describe the microbeams static and dynamic behaviors. We study the collapse instability, which brings the microbeam from its unstuck configuration to touch the substrate and gets stuck in the so-called pinned configuration. We calculate the pull-in length that distinguishes the free from the pinned configurations as a function of the beam thickness and gap width for both microbeams. Comparisons are made with analytical results reported in the literature based on the Ritz method for linear and nonlinear beam models. The instability problem, which brings the microbeam from a pinned to adhered configuration is also investigated. For this case, we use a shooting technique to solve the boundary-value problem governing the deflection of the microbeams. The critical microbeam length for this second instability is also calculated.

  8. The fifth force

    International Nuclear Information System (INIS)

    Fischbach, E.; Sudarsky, D.; Szafer, A.; Talmadge, C.; Aronson, S.H.

    1986-01-01

    We present a phenomenological description of the ''fifth force'' which focuses on the implications of the existing data from satellite and geophysical measurements of gravity, the Eoetvoes experiment, decays into hyperphotons, and the energy-dependence of the K 0 - anti K 0 parameters

  9. Magnetic Force Microscopy

    NARCIS (Netherlands)

    Abelmann, Leon

    Principle of MFM In magnetic force microscopy (MFM), the magnetic stray field above a very flat specimen, or sample, is detected by placing a small magnetic element, the tip, mounted on a cantilever spring very close to the surface of the sample (Figure 1). Typical dimensions are a cantilever length

  10. Separation problems and forcing

    Czech Academy of Sciences Publication Activity Database

    Zapletal, Jindřich

    2013-01-01

    Roč. 13, č. 1 (2013), s. 1350002 ISSN 0219-0613 R&D Projects: GA AV ČR IAA100190902 Institutional research plan: CEZ:AV0Z10190503 Keywords : separation * set of uniqueness * forcing Subject RIV: BA - General Mathematics Impact factor: 0.364, year: 2012 http://www.worldscientific.com/doi/abs/10.1142/S0219061313500025

  11. Allegiance: Egypt Security Forces

    Science.gov (United States)

    2013-12-01

    expected after the uprising of 2011 never truly materialized; the Interior Ministry instituted various cosmetic changes, but its basic construct and...military forces located there. The masked men appeared to be shooting and the army responded, shooting back.284 Whatever the stories

  12. Activation force splines

    DEFF Research Database (Denmark)

    Engell-Nørregård, Morten Pol; Erleben, Kenny

    We present a method for simulating the active contraction of deformable models, usable for interactive animation of soft deformable objects. We present a novel physical principle as the governing equation for the coupling between the low dimensional 1D activation force model and the higher...

  13. Fifth force, sixth force and all that

    International Nuclear Information System (INIS)

    Recami, E.; Tonin Zanchin, V.

    1988-01-01

    In the recent literature, a few claims appeared about possible deviations from the ordinary gravitational laws (both at the terrestrial and at the galactic level). The experimental evidence does not seem to be conclusive; nor its is clear if new forces are showing up, or if we have to accept actual deviations from Newton or Einstein gravitation (in the latter case, the validity of the very Equivalence Principle might be on the stage). In such a situation, the attempts by various authors at explaining the ''new effects'' just on the basis of the ordinary theory of General Relativity (for instance, in terms of quantum gravity) can be regarded as logically instance, in terms of quantum gravity) can be regarded as logically questionable. In this pedagogically oriented paper, the problem is approached within the classical realm, by exploring whether the possible new effects can be accounted for through minimal modifications of the standard formulatiaon of General Relativity: in particular, through exploitation and extension of the role of the cosmological constant

  14. Biodegradable Piezoelectric Force Sensor.

    Science.gov (United States)

    Curry, Eli J; Ke, Kai; Chorsi, Meysam T; Wrobel, Kinga S; Miller, Albert N; Patel, Avi; Kim, Insoo; Feng, Jianlin; Yue, Lixia; Wu, Qian; Kuo, Chia-Ling; Lo, Kevin W-H; Laurencin, Cato T; Ilies, Horea; Purohit, Prashant K; Nguyen, Thanh D

    2018-01-30

    Measuring vital physiological pressures is important for monitoring health status, preventing the buildup of dangerous internal forces in impaired organs, and enabling novel approaches of using mechanical stimulation for tissue regeneration. Pressure sensors are often required to be implanted and directly integrated with native soft biological systems. Therefore, the devices should be flexible and at the same time biodegradable to avoid invasive removal surgery that can damage directly interfaced tissues. Despite recent achievements in degradable electronic devices, there is still a tremendous need to develop a force sensor which only relies on safe medical materials and requires no complex fabrication process to provide accurate information on important biophysiological forces. Here, we present a strategy for material processing, electromechanical analysis, device fabrication, and assessment of a piezoelectric Poly-l-lactide (PLLA) polymer to create a biodegradable, biocompatible piezoelectric force sensor, which only employs medical materials used commonly in Food and Drug Administration-approved implants, for the monitoring of biological forces. We show the sensor can precisely measure pressures in a wide range of 0-18 kPa and sustain a reliable performance for a period of 4 d in an aqueous environment. We also demonstrate this PLLA piezoelectric sensor can be implanted inside the abdominal cavity of a mouse to monitor the pressure of diaphragmatic contraction. This piezoelectric sensor offers an appealing alternative to present biodegradable electronic devices for the monitoring of intraorgan pressures. The sensor can be integrated with tissues and organs, forming self-sensing bionic systems to enable many exciting applications in regenerative medicine, drug delivery, and medical devices.

  15. Force Modulator System

    Energy Technology Data Exchange (ETDEWEB)

    Redmond Clark

    2009-04-30

    Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better

  16. Suicide and forced marriage.

    Science.gov (United States)

    Pridmore, Saxby; Walter, Garry

    2013-03-01

    The prevailing view that the vast majority of those who complete suicide have an underlying psychiatric disorder has been recently challenged by research on the contribution of "predicaments", in the absence of mental illness, to suicide. In this paper, we sought data to support the notion that forced marriage may lead to suicide without the presence of psychiatric disorder. Historical records, newspapers, and the electronic media were searched for examples. Two examples from ancient times and six from the last hundred years were located and described. These cases suggest that forced marriage may lead to suicide and complements earlier findings that loss of fortune, health, liberty, and reputation may lead to suicide in the absence of mental disorder.

  17. Flora rapid reaction forces

    Directory of Open Access Journals (Sweden)

    Виктор Васильевич Туганаев

    2015-10-01

    Full Text Available Flora rapid reaction forces ­– there are explerents that have high productivity and weak competitiveness. Their innately functional allocation is to plant disturbed acres as soon as possible preventing by that biosphere homeostasis disturbance. Disturbed acres were used to take place in geological history. Nowadays they take especially big areas. Considering a historical line of Dactylis glomerata L. authors suggest to separate out an especial group of anthropochores which they call medieophytes

  18. Air Force Leadership Diversity

    Science.gov (United States)

    2017-04-06

    College, Air University, Maxwell AFB, AL. He grew up as part of an Air Force family, entered active duty in 1996, and is a career Aircraft Maintenance... artificially limit them to capping out at O-6 if we want to encourage diversity in our most senior leadership levels as we seek to create a stronger...but I am not sure it does. I find it interesting that as of 31 December 2016 the Deputy Chief of Staff for Intelligence , Surveillance and

  19. The task force process

    International Nuclear Information System (INIS)

    Applegate, J.S.

    1995-01-01

    This paper focuses on the unique aspects of the Fernald Citizens Task Force process that have contributed to a largely successful public participation effort at Fernald. The Fernald Citizens Task Force passed quickly by many procedural issues. Instead, the Task Force concentrated on (a) educating itself about the site, its problems, and possible solutions, and (b) choosing a directed way to approach its mandate: To make recommendations on several open-quotes big pictureclose quotes issues, including future use of the site, cleanup levels, waste disposition, and cleanup priorities. This paper presents the approach used at Fernald for establishing and running a focused site-specific advisory board, the key issues that have been faced, and how these issues were resolved. The success of Fernald in establishing a strong and functioning site-specific advisory board serves as a useful model for other DOE facilities, although the Fernald model is just one of many approaches that can be taken. However, the approach presented here has worked extremely well for Fernald

  20. Gap Task Force

    CERN Multimedia

    Lissuaer, D

    One of the more congested areas in the ATLAS detector is the GAP region (the area between the Barrel Calorimeter and the End Cap calorimeter) where Inner Detector services, LAr Services and some Tile services all must co-habitat in a very limited area. It has been clear for some time that the space in the GAP region is not sufficient to accommodate all that is needed. In the last few month additional problems of routing all the services to Z=0 have been encountered due to the very limited space between the Tile Calorimeter and the first layer of Muon chambers. The Technical Management Board (TMB) and the Executive Board (EB) decided in the middle of March to establish a Task Force to look at this problem and come up with a solution within well-specified guidelines. The task force consisted of experts from the ID, Muon, Liquid Argon and Tile systems in addition to experts from the Technical Coordination team and the Physics coordinator. The task force held many meetings and in general there were some very l...

  1. ``Force,'' ontology, and language

    Science.gov (United States)

    Brookes, David T.; Etkina, Eugenia

    2009-06-01

    We introduce a linguistic framework through which one can interpret systematically students’ understanding of and reasoning about force and motion. Some researchers have suggested that students have robust misconceptions or alternative frameworks grounded in everyday experience. Others have pointed out the inconsistency of students’ responses and presented a phenomenological explanation for what is observed, namely, knowledge in pieces. We wish to present a view that builds on and unifies aspects of this prior research. Our argument is that many students’ difficulties with force and motion are primarily due to a combination of linguistic and ontological difficulties. It is possible that students are primarily engaged in trying to define and categorize the meaning of the term “force” as spoken about by physicists. We found that this process of negotiation of meaning is remarkably similar to that engaged in by physicists in history. In this paper we will describe a study of the historical record that reveals an analogous process of meaning negotiation, spanning multiple centuries. Using methods from cognitive linguistics and systemic functional grammar, we will present an analysis of the force and motion literature, focusing on prior studies with interview data. We will then discuss the implications of our findings for physics instruction.

  2. Force transmission in epithelial tissues.

    Science.gov (United States)

    Vasquez, Claudia G; Martin, Adam C

    2016-03-01

    In epithelial tissues, cells constantly generate and transmit forces between each other. Forces generated by the actomyosin cytoskeleton regulate tissue shape and structure and also provide signals that influence cells' decisions to divide, die, or differentiate. Forces are transmitted across epithelia because cells are mechanically linked through junctional complexes, and forces can propagate through the cell cytoplasm. Here, we review some of the molecular mechanisms responsible for force generation, with a specific focus on the actomyosin cortex and adherens junctions. We then discuss evidence for how these mechanisms promote cell shape changes and force transmission in tissues. © 2016 Wiley Periodicals, Inc.

  3. Force modulation for improved conductive-mode atomic force microscopy

    NARCIS (Netherlands)

    Koelmans, W.W.; Sebastian, Abu; Despont, Michel; Pozidis, Haris

    We present an improved conductive-mode atomic force microscopy (C-AFM) method by modulating the applied loading force on the tip. Unreliable electrical contact and tip wear are the primary challenges for electrical characterization at the nanometer scale. The experiments show that force modulation

  4. Predictability of Forced Lorenz Systems

    Science.gov (United States)

    Li, Baosheng; Ding, Ruiqiang; Li, Jianping; Zhong, Quanjia

    2017-04-01

    Based on the nonlinear local Lyapunov exponent (NLLE) approach, the influences of external forcing on the predictability are studied in the Lorenz systems with constant and quasi-periodic forces in this paper. The results indicate that for the Lorenz systems with constant and quasi-periodic forces, their predictability limits increase with the forcing strength. With the same magnitude and different directions, the constant or quasi-periodic forcing shows different effects on the predictability limit in the Lorenz system, and these effects become significant with the increase of the forcing strength. Generally speaking, the positive forcing leads to a higher predictability limit than the negative forcing. Therefore, when we think about the effects of positive and negative elements and phases in the atmosphere and ocean research, the predictability problems driven by different phases should be considered separately. In addition, the influences of constant and quasi-periodic forces on the predictability are different in the Lorenz system. The effect of the constant forcing on the predictability is mainly reflected in the linear phase of error growth, while the nonlinear phase should also be considered for the situation of the quasi-periodic forcing. The predictability limit of the system under constant forcing is longer than the system under quasi-periodic forcing. These results based on simple chaotic model could provide insight into the studies of the actual atmosphere predictability.

  5. Modernization of African Armed Forces

    DEFF Research Database (Denmark)

    Mandrup, Thomas

    2015-01-01

    Concept paper framing the debate at the Dakar Forum Workshop on Modernization of Armed forces in Africa.......Concept paper framing the debate at the Dakar Forum Workshop on Modernization of Armed forces in Africa....

  6. Force Dynamics of Verb Complementation

    Directory of Open Access Journals (Sweden)

    Jacek Woźny

    2015-12-01

    Full Text Available Force Dynamics of Verb Complementation The concepts of motion and force are both extensively discussed in cognitive linguistics literature. But they are discussed separately. The first usually in the context of ‘motion situations’ (Talmy, Slobin, Zlatev, the other as part of the Force Dynamics framework, which was developed by Talmy. The aim of this paper is twofold: first, to argue that the concepts of force and motion should not be isolated but considered as two inseparable parts of force-motion events. The second goal is to prove that the modified Force Dynamics (force-motion framework can be used for precise characterization of the verb complementation patterns. To this end, a random sample of 50 sentences containing the verb ‘went’ is analyzed, demonstrating the differences between the categories of intensive and intransitive complementation with respect to the linguistically coded parameters of force and motion.

  7. The law of electromagnetic force

    Directory of Open Access Journals (Sweden)

    V.J. Kutkovetskyy

    2014-06-01

    Full Text Available Calculation peculiarities for Lorentz force, Ampere force, interaction of parallel electric currents, and the moment of electrical machines are analyzed. They have exceptions on application, and they are the rules which result from the law of electromagnetic force as coordinate derivative of the operating magnetic flow. An addition to the direction of electromagnetic force action is proposed. Standards of salient-pole electrical machine designing are considered.

  8. Atomic Force Microscope

    Energy Technology Data Exchange (ETDEWEB)

    Day, R.D.; Russell, P.E.

    1988-12-01

    The Atomic Force Microscope (AFM) is a recently developed instrument that has achieved atomic resolution imaging of both conducting and non- conducting surfaces. Because the AFM is in the early stages of development, and because of the difficulty of building the instrument, it is currently in use in fewer than ten laboratories worldwide. It promises to be a valuable tool for obtaining information about engineering surfaces and aiding the .study of precision fabrication processes. This paper gives an overview of AFM technology and presents plans to build an instrument designed to look at engineering surfaces.

  9. Causal Entropic Forces

    Science.gov (United States)

    Wissner-Gross, A. D.; Freer, C. E.

    2013-04-01

    Recent advances in fields ranging from cosmology to computer science have hinted at a possible deep connection between intelligence and entropy maximization, but no formal physical relationship between them has yet been established. Here, we explicitly propose a first step toward such a relationship in the form of a causal generalization of entropic forces that we find can cause two defining behaviors of the human “cognitive niche”—tool use and social cooperation—to spontaneously emerge in simple physical systems. Our results suggest a potentially general thermodynamic model of adaptive behavior as a nonequilibrium process in open systems.

  10. Role of attractive forces in tapping tip force microscopy

    DEFF Research Database (Denmark)

    Kyhle, Anders; Sørensen, Alexis Hammer; Bohr, Jakob

    1997-01-01

    We present experimental and numerical results demonstrating the drastic influence of attractive forces on the behaviour of the atomic force microscope when operated in the resonant tapping tip mode in an ambient environment. It is often assumed that tapping is related to repulsive interaction....... In contrast, we find that in general the attractive forces are the most dominant interaction in this mode of operation. We show that attractive forces in combination with the repulsive elastic type of forces cause points of instability in the parameter space constituted by: the cantilever swing amplitude...

  11. Small amplitude atomic force spectroscopy

    NARCIS (Netherlands)

    de Beer, Sissi; van den Ende, Henricus T.M.; Ebeling, Daniel; Mugele, Friedrich Gunther; Bhushan, Bharat

    2011-01-01

    Over the years atomic force microscopy has developed from a pure imaging technique to a tool that can be employed for measuring quantitative tip–sample interaction forces. In this chapter we provide an overview of various techniques to extract quantitative tip–sample forces focusing on both

  12. Force and motion

    CERN Document Server

    Robertson, William C

    2002-01-01

    Intimidated by inertia? Frightened by forces? Mystified by Newton s law of motion? You re not alone and help is at hand. The stop Faking It! Series is perfect for science teachers, home-schoolers, parents wanting to help with homework all of you who need a jargon-free way to learn the background for teaching middle school physical science with confidence. With Bill Roberton as your friendly, able but somewhat irreverent guide, you will discover you CAN come to grips with the basics of force and motion. Combining easy-to-understand explanations with activities using commonly found equipment, this book will lead you through Newton s laws to the physics of space travel. The book is as entertaining as it is informative. Best of all, the author understands the needs of adults who want concrete examples, hands-on activities, clear language, diagrams and yes, a certain amount of empathy. Ideas For Use Newton's laws, and all of the other motion principles presented in this book, do a good job of helping us to underst...

  13. TRIGA forced shutdowns analysis

    International Nuclear Information System (INIS)

    Negut, Gheorghe; Laslau, Florica

    2008-01-01

    The need for improving the operation leads us to use new methods and strategies. Probabilistic safety assessments and statistical analysis provide insights useful for our reactor operation. This paper is dedicated to analysis of the forced shutdowns during the first reactor operation period, between 1980 to 1989. A forced shutdown data base was designed using data on forced shutdowns collected from the reactor operation logbooks. In order to sort out the forced shutdowns the records have the following fields: - current number, date, equipment failed, failure type (M for mechanical, E for electrical, D for irradiation device, U for human factor failure; - scram mode, SE for external scram, failure of reactor cooling circuits and/or irradiation devices, SR for reactor scram, exceeding of reactor nuclear parameters, SB for reactor scram by control rod drop, SM for manual scram required by the abnormal reactor status; - scram cause, giving more information on the forced shutdown. This data base was processed using DBase III. The data processing techniques are presented. To sort out the data, one of the criteria was the number of scrams per year, failure type, scram mode, etc. There are presented yearly scrams, total operation time in hours, total unavailable time, median unavailable time period, reactor availability A. There are given the formulae used to calculate the reactor operational parameters. There are shown the scrams per year in the 1980 to 1989 period, the reactor operation time per year, the reactor shutdown time per year and the operating time versus down time per year. Total number of scrams in the covered period was 643 which caused a reactor down time of 4282.25 hours. In a table the scrams as sorted on the failure type is shown. Summarising, this study emphasized some problems and difficulties which occurred during the TRIGA reactor operation at Pitesti. One main difficulty in creating this data base was the unstandardized scram record mode. Some times

  14. Equivalent linearization of nonlinear forces

    Science.gov (United States)

    Meng, Guang; Xue, Zhongqing

    1987-07-01

    A method used for equivalent linearization of the two orthogonal squeeze-film forces is extended here to the general case of n degrees of freedom and n components of nonlinear forces, and the expressions for equivalent linear coefficients are derived. Nonlinear forces can be linearized by the methods of Fourier expansion, active and reactive powers, or mean-square error. The n components of nonlinear forces can all be expressed formally as the sum of an average force, a linear spring force, and a linear damping force. This paper also gives a flow chart for calculating the steady-state responses of a nonlinear system with many degrees of freedom, using the method of equivalent linearization. The resulting saving in computation time is demonstrated by a numerical example of a flexible rotor-bearing system with a noncentralized squeeze-film damper.

  15. Differential magnetic force microscope imaging.

    Science.gov (United States)

    Wang, Ying; Wang, Zuobin; Liu, Jinyun; Hou, Liwei

    2015-01-01

    This paper presents a method for differential magnetic force microscope imaging based on a two-pass scanning procedure to extract differential magnetic forces and eliminate or significantly reduce background forces with reversed tip magnetization. In the work, the difference of two scanned images with reversed tip magnetization was used to express the local magnetic forces. The magnetic sample was first scanned with a low lift distance between the MFM tip and the sample surface, and the magnetization direction of the probe was then changed after the first scan to perform the second scan. The differential magnetic force image was obtained through the subtraction of the two images from the two scans. The theoretical and experimental results have shown that the proposed method for differential magnetic force microscope imaging is able to reduce the effect of background or environment interference forces, and offers an improved image contrast and signal to noise ratio (SNR). © Wiley Periodicals, Inc.

  16. Comparison between static maximal force and handbrake pulling force.

    Science.gov (United States)

    Chateauroux, E; Wang, X

    2012-01-01

    The measurement of maximum pulling force is important not only for specifying force limit of industrial workers but also for designing controls requiring high force. This paper presents a comparison between maximal static handbrake pulling force (FST) and force exerted during normal handbrake pulling task (FDY). These forces were measured for different handle locations and subject characteristics. Participants were asked to pull a handbrake on an adjustable car mock-up as they would do when parking their own car, then to exert a force as high as possible on the pulled handbrake. Hand pulling forces were measured using a six-axes force sensor. 5 fixed handbrake positions were tested as well as a neutral handbrake position defined by the subject. FST and FDY were significantly correlated. Both were found to be dependent on handbrake position, age and gender. As expected, women and older subjects exerted lower forces. FST was significantly higher than FDY. The ratio FmR (FDY divided by FST) was also analyzed. Women showed higher FmR than men meaning that the task required a higher amount of muscle capability for women. FmR was also influenced by handbrake location. These data will be useful for handbrake design.

  17. Flow mechanotransduction regulates traction forces, intercellular forces, and adherens junctions

    Science.gov (United States)

    Ting, Lucas H.; Jahn, Jessica R.; Jung, Joon I.; Shuman, Benjamin R.; Feghhi, Shirin; Han, Sangyoon J.; Rodriguez, Marita L.

    2012-01-01

    Endothelial cells respond to fluid shear stress through mechanotransduction responses that affect their cytoskeleton and cell-cell contacts. Here, endothelial cells were grown as monolayers on arrays of microposts and exposed to laminar or disturbed flow to examine the relationship among traction forces, intercellular forces, and cell-cell junctions. Cells under laminar flow had traction forces that were higher than those under static conditions, whereas cells under disturbed flow had lower traction forces. The response in adhesion junction assembly matched closely with changes in traction forces since adherens junctions were larger in size for laminar flow and smaller for disturbed flow. Treating the cells with calyculin-A to increase myosin phosphorylation and traction forces caused an increase in adherens junction size, whereas Y-27362 cause a decrease in their size. Since tugging forces across cell-cell junctions can promote junctional assembly, we developed a novel approach to measure intercellular forces and found that these forces were higher for laminar flow than for static or disturbed flow. The size of adherens junctions and tight junctions matched closely with intercellular forces for these flow conditions. These results indicate that laminar flow can increase cytoskeletal tension while disturbed flow decreases cytoskeletal tension. Consequently, we found that changes in cytoskeletal tension in response to shear flow conditions can affect intercellular tension, which in turn regulates the assembly of cell-cell junctions. PMID:22447948

  18. Chin force in violin playing.

    Science.gov (United States)

    Obata, Satoshi; Kinoshita, Hiroshi

    2012-06-01

    Force generated between the left mandible of violinists and the chinrest of the violin was examined using a force-sensing chinrest developed in this study. A strain-gauge force sensor was built, and it was fixed between the violin's top plate and a chin cup. Fifteen professional/amateur violinists held the violin statically, played musical scales with different sound properties and sounding techniques, as well as an excerpt from a Max Bruch concerto. Peak and mean forces were evaluated for each task. In a separate experiment, lateral movement of the lower teeth due to different levels of voluntary chin force exertion was measured. Static holding forces observed were 15 and 22 N with and without the help of the left hand, respectively. Peak force increased from 16 N at soft dynamics to 20 N at strong dynamics during scales. The force further increased to 29 N with the use of vibrato technique and 35 N during shifts. Tempo and hand position did not affect the force. Playing a Bruch concerto induced a mean peak force of 52 N, ranging from 31 to 82 N among the violinists. The developed force-sensing chinrest could accurately record the generated chin force. Typical chin force to stabilize the violin during ordinary musical performance was less than 30 N, but it could momentarily exceed 50 N when technically demanding musical pieces were performed. The lateral shift of the mandible was fairly small (<0.4 mm) even with high chin-force exertion, possibly due to clenching of the molars.

  19. Students' conceptions about force

    International Nuclear Information System (INIS)

    Soeguet, Oe.

    2005-01-01

    Students from a young age have developed in their own minds differing concepts of things such as all creatures having a soul. Also children see the environment and interpret what they see according to their own understanding and explanation. In particular, with regards to physics, things like light, heat, motion, structure of matter and energy are understood at the level of a child s comprehension. Most often the child s understanding varies quite differently from the actual true meaning. As a result the child is reluctant to accept any other explanation. In such situations the necessary difficulties must be tackled with care and caution pertinent to the individual. Studies at K.S.U University related to force and motion of various departments in the Faculty of Science and Letters have been investigated. After evaluations of all the findings a number of suggestions have been made to change student views and ideas

  20. Silicon force sensor

    Energy Technology Data Exchange (ETDEWEB)

    Galambos, Paul C.; Crenshaw, Thomas B.; Nishida, Erik E.; Burnett, Damon J.; Lantz, Jeffrey W.

    2016-07-05

    The various technologies presented herein relate to a sensor for measurement of high forces and/or high load shock rate(s), whereby the sensor utilizes silicon as the sensing element. A plate of Si can have a thinned region formed therein on which can be formed a number of traces operating as a Wheatstone bridge. The brittle Si can be incorporated into a layered structure comprising ductile and/or compliant materials. The sensor can have a washer-like configuration which can be incorporated into a nut and bolt configuration, whereby tightening of the nut and bolt can facilitate application of a compressive preload upon the sensor. Upon application of an impact load on the bolt, the compressive load on the sensor can be reduced (e.g., moves towards zero-load), however the magnitude of the preload can be such that the load on the sensor does not translate to tensile stress being applied to the sensor.

  1. The resistible force

    International Nuclear Information System (INIS)

    Baeschlin, D.L.

    1980-01-01

    Many people of today have an oppositional attitude towards the continual loss of sense of existence which manifests itself in 'the great refusal'. They also behave in an anti-authoritarian manner towards their first father Marx. They realize that it is ourselves who have to search and find. The protest groups of the most different origin have come into being as 'the sand in the wheels' of a seemingly irresistable force. They have formed themselves beyond the 'Left' and the 'Right'. Nuclear energy is the instrument which acts as a gear for their opposition, which establishes it and which provides the basis for their self-concept. It is the symbol where the conflict between living standard and living quality breaks open. In essential, however, the protest is growing towards supporting an effective administration of all goods of our world. (orig./HP) [de

  2. Direct measurements of intermolecular forces by chemical force microscopy

    Science.gov (United States)

    Vezenov, Dmitri Vitalievich

    1999-12-01

    Detailed description of intermolecular forces is key to understanding a wide range of phenomena from molecular recognition to materials failure. The unique features of atomic force microscopy (AFM) to make point contact force measurements with ultra high sensitivity and to generate spatial maps of surface topography and forces have been extended to include measurements between well-defined organic molecular groups. Chemical modification of AFM probes with self-assembled monolayers (SAMs) was used to make them sensitive to specific molecular interactions. This novel chemical force microscopy (CFM) technique was used to probe forces between different molecular groups in a range of environments (vacuum, organic liquids and aqueous solutions); measure surface energetics on a nanometer scale; determine pK values of the surface acid and base groups; measure forces to stretch and unbind a short synthetic DNA duplex and map the spatial distribution of specific functional groups and their ionization state. Studies of adhesion forces demonstrated the important contribution of hydrogen bonding to interactions between simple organic functionalities. The chemical identity of the tip and substrate surfaces as well as the medium had a dramatic effect on adhesion between model monolayers. A direct correlation between surface free energy and adhesion forces was established. The adhesion between epoxy polymer and model mixed SAMs varied with the amount of hydrogen bonding component in the monolayers. A consistent interpretation of CFM measurements in polar solvents was provided by contact mechanics models and intermolecular force components theory. Forces between tips and surfaces functionalized with SAMs terminating in acid or base groups depended on their ionization state. A novel method of force titration was introduced for highly local characterization of the pK's of surface functional groups. The pH-dependent changes in friction forces were exploited to map spatially the

  3. Force 2025 and Beyond Strategic Force Design Analytic Model

    Science.gov (United States)

    2017-01-12

    the methodology used to construct force design models. The Summary section provides a summary of our findings. Background By 2025, a leaner ...designs. We describe a data development methodology that characterizes the data required to construct a force design model using our approach. We...from a model constructed using this methodology in a case study. 15. SUBJECT TERMS Force design, mixed integer programming, optimization, value

  4. Automated force controller for amplitude modulation atomic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Miyagi, Atsushi, E-mail: atsushi.miyagi@inserm.fr, E-mail: simon.scheuring@inserm.fr; Scheuring, Simon, E-mail: atsushi.miyagi@inserm.fr, E-mail: simon.scheuring@inserm.fr [U1006 INSERM, Université Aix-Marseille, Parc Scientifique et Technologique de Luminy, 163 Avenue de Luminy, 13009 Marseille (France)

    2016-05-15

    Atomic Force Microscopy (AFM) is widely used in physics, chemistry, and biology to analyze the topography of a sample at nanometer resolution. Controlling precisely the force applied by the AFM tip to the sample is a prerequisite for faithful and reproducible imaging. In amplitude modulation (oscillating) mode AFM, the applied force depends on the free and the setpoint amplitudes of the cantilever oscillation. Therefore, for keeping the applied force constant, not only the setpoint amplitude but also the free amplitude must be kept constant. While the AFM user defines the setpoint amplitude, the free amplitude is typically subject to uncontrollable drift, and hence, unfortunately, the real applied force is permanently drifting during an experiment. This is particularly harmful in biological sciences where increased force destroys the soft biological matter. Here, we have developed a strategy and an electronic circuit that analyzes permanently the free amplitude of oscillation and readjusts the excitation to maintain the free amplitude constant. As a consequence, the real applied force is permanently and automatically controlled with picoNewton precision. With this circuit associated to a high-speed AFM, we illustrate the power of the development through imaging over long-duration and at various forces. The development is applicable for all AFMs and will widen the applicability of AFM to a larger range of samples and to a larger range of (non-specialist) users. Furthermore, from controlled force imaging experiments, the interaction strength between biomolecules can be analyzed.

  5. Hydrodynamic force microscopy

    Science.gov (United States)

    Ulrich, Elaine Schmid

    Microfluidic networks and microporous materials have long been of interest in areas such as hydrology, petroleum engineering, chemical and electrochemical engineering, medicine and biochemical engineering. With the emergence of new processes in gas separation, cell sorting, ultrafiltration, and advanced materials synthesis, the importance of building a better qualitative and quantitative understanding of these key technologies has become apparent. However, microfluidic measurement and theory is still relatively underdeveloped, presenting a significant obstacle to the systematic design of microfluidic devices and materials. Theoretical challenges arise from the breakdown of classical viscous flow models as the flow dimensions approach the mean free path of individual molecules. Experimental challenges arise from the lack of flow profilometry techniques at sub-micron length scales. Here we present an extension of scanning probe microscopy techniques, which we have termed Hydrodynamic Force Microscopy (HFM). HFM exploits fluid drag to profile microflows and to map the permeability of microporous materials. In this technique, an atomic force microscope (AFM) cantilever is scanned close to a microporous sample surface. The hydrodynamic interactions arising from a pressure-driven flow through the sample are then detected by mapping the deflection of an AFM cantilever. For gas flows at atmospheric pressure, HFM has been shown to achieve a velocity sensitivity of 1 cm/s with a spatial resolution of ˜ 10 nm. This compares very favorably to established techniques such as hot-wire and laser Doppler anemometry, whose spatial resolutions typically exceed 1 mum and which may rely on the use of tracer particles or flow markers1. We demonstrate that HFM can successfully profile Poiseuille flows inside pores as small as 100 nm and can distinguish Poiseuille flow from uniform flow for short entry lengths. HFM detection of fluid jets escaping from porous samples can also reveal a

  6. Non-conservative optical forces

    Science.gov (United States)

    Sukhov, Sergey; Dogariu, Aristide

    2017-11-01

    Undoubtedly, laser tweezers are the most recognized application of optically induced mechanical action. Their operation is usually described in terms of conservative forces originating from intensity gradients. However, the fundamental optical action on matter is non-conservative. We will review different manifestations of non-conservative optical forces (NCF) and discuss their dependence on the specific spatial properties of optical fields that generate them. New developments relevant to the NCF such as tractor beams and transversal forces are also discussed.

  7. MEMS Bragg grating force sensor

    DEFF Research Database (Denmark)

    Reck, Kasper; Thomsen, Erik Vilain; Hansen, Ole

    2011-01-01

    We present modeling, design, fabrication and characterization of a new type of all-optical frequency modulated MEMS force sensor based on a mechanically amplified double clamped waveguide beam structure with integrated Bragg grating. The sensor is ideally suited for force measurements in harsh...... environments and for remote and distributed sensing and has a measured sensitivity of -14 nm/N, which is several times higher than what is obtained in conventional fiber Bragg grating force sensors. © 2011 Optical Society of America....

  8. Magnetic Resonance Force Microscopy System

    Data.gov (United States)

    Federal Laboratory Consortium — The Magnetic Resonance Force Microscopy (MRFM) system, developed by ARL, is the world's most sensitive nuclear magnetic resonance (NMR) spectroscopic analysis tool,...

  9. Blocking of Brute Force Attack

    OpenAIRE

    M.Venkata Krishna Reddy

    2012-01-01

    A common threat Web developers face is a password-guessing attack known as a brute-force attack. A brute-force attack is an attempt to discover a password by systematically trying every possible combination of letters, numbers, and symbols until you discover the one correct combination that works. If your Web site requires user authentication, you are a good target for a brute-force attack. An attacker can always discover a password through a brute-force attack, but the downside is that it co...

  10. Wind Forces on Container Ships

    DEFF Research Database (Denmark)

    Andersen, Ingrid Marie Vincent

    2012-01-01

    An investigation of the wind forces acting on a 9,000+ TEU container ship has been carried out through a series of wind tunnel tests. It was investigated how the wind forces depend on the container configuration on the deck using a 1:450 scale model and a series of appropriate container...... are presented as nondimensional coefficients. It is concluded, that the measured forces and moment depend on the container configuration on deck, and the results may provide a general idea of how the magnitude of the wind forces is affected by a given container stacking configuration on a similar container ship....

  11. Force As A Momentum Current

    International Nuclear Information System (INIS)

    Munera, Hector A.

    2010-01-01

    Advantages of a neo-Cartesian approach to classical mechanics are noted. If conservation of linear momentum is the fundamental principle, Newton's three laws become theorems. A minor paradox in static Newtonian mechanics is identified, and solved by reinterpreting force as a current of momentum. Contact force plays the role of a mere midwife in the exchange of momentum; however, force cannot be eliminated from physics because it provides the numerical value for momentum current. In this sense, in a neo-Cartesian formulation of mechanics the concept of force becomes strengthened rather than weakened.

  12. Forces of nature

    CERN Document Server

    AUTHOR|(CDS)2072602

    2016-01-01

    A breathtaking and beautiful exploration of our planet. This groundbreaking book, which accompanies the new BBC1 TV series, provides the deepest answers to the simplest questions. 'Why is the sky blue?' 'Why is the Earth round?' 'Why is every snowflake unique?' To answer these and many other questions, Professor Brian Cox will reveal some of the most extraordinary phenomena and events on Earth and in the Universe and beyond. From the immensity of Earth's globe to all the world's myriad snowflakes, the forces of nature shape everything we see. Pushed to extremes, the results are astonishing. From the realm of auroras to the heart of our planet, the ingredients that make everything on Earth connect each one of us in an eternal cycle of life. Brian will reveal why Earth is the most colourful world we know, exploring the white light of the sun as it travels through the darkness of space until it hits Earth's atmosphere where it begins a new journey, splitting into a rainbow of colours. From the great plains of th...

  13. Measuring Forces between Oxide Surfaces Using the Atomic Force Microscope

    DEFF Research Database (Denmark)

    Pedersen, Henrik Guldberg; Høj, Jakob Weiland

    1996-01-01

    The interactions between colloidal particles play a major role in processing of ceramics, especially in casting processes. With the Atomic Force Microscope (AFM) it is possible to measure the inter-action force between a small oxide particle (a few micron) and a surface as function of surface...

  14. Societal Forces That ERODE Creativity

    Science.gov (United States)

    Sternberg, Robert; Kaufman, James C.

    2018-01-01

    Background/Context: Creativity is an indispensable force in intellectual, social, cultural, and economic development. Yet societal forces conspire to erode it. Educators have despaired for many years over how schools often fail to encourage creativity, but society as a whole is just as guilty. But how do schools and society fail to encourage, or…

  15. Adhesive forces at bimetallic interfaces

    International Nuclear Information System (INIS)

    Das, M.P.; Nafari, N.; Ziesche, P.; Kaschner, H.R.

    1987-03-01

    Force concepts in condensed systems have progressed significantly in recent years. In the context of bimetallic interfaces we consider the Pauli-Hellman-Feynman theorem, use it to check the variational calculations of interfacial energies and estimate the force constants. (author). 13 refs, 2 figs, 2 tabs

  16. Force optimized recoil control system

    Science.gov (United States)

    Townsend, P. E.; Radkiewicz, R. J.; Gartner, R. F.

    1982-05-01

    Reduction of the recoil force of high rate of fire automatic guns was proven effective. This system will allow consideration of more powerful guns for use in both helicopter and armored personnel carrier applications. By substituting the large shock loads of firing guns with a nearly constant force, both vibration and fatigue problems that prevent mounting of powerful automatic guns is eliminated.

  17. Force.com enterprise architecture

    CERN Document Server

    Fawcett, Andrew

    2014-01-01

    This book is for advanced Force.com developers and architects who need to understand the Salesforce platform from the perspective of enterprise-level requirements. You should have an existing understanding of Apex and Visualforce. Those familiar with other enterprise software ecosystems will also find this book ideal as they adopt Force.com.

  18. Handbook of Molecular Force Spectroscopy

    CERN Document Server

    Noy, Aleksandr

    2008-01-01

    "...Noy's Handbook of Molecular Force Spectroscopy is both a timely and useful summary of fundamental aspects of molecular force spectroscopy, and I believe it would make a worthwhile addition to any good scientific library. New research groups that are entering this field would be well advisedto study this handbook in detail before venturing into the exciting and challenging world of molecular force spectroscopy." Matthew F. Paige, University of Saskatchewan, Journal of the American Chemical Society Modern materials science and biophysics are increasingly focused on studying and controlling intermolecular interactions on the single-molecule level. Molecular force spectroscopy was developed in the past decade as the result of several unprecedented advances in the capabilities of modern scientific instrumentation, and defines a number of techniques that use mechanical force measurements to study interactions between single molecules and molecular assemblies in chemical and biological systems. Examples of these...

  19. Force sensing in surgical sutures.

    Directory of Open Access Journals (Sweden)

    Tim Horeman

    Full Text Available The tension in a suture is an important factor in the process of wound healing. If there is too much tension in the suture, the blood flow is restricted and necrosis can occur. If the tension is too low, the incision opens up and cannot heal properly. The purpose of this paper is to describe the design and evaluation of the Stitch Force (SF sensor and the Hook-In Force (HIF sensor. These sensors were developed to measure the force on a tensioned suture inside a closed incision and to measure the pulling force used to close the incision. The accuracy of both sensors is high enough to determine the relation between the force in the thread of a stitch and the pulling force applied on the suture by the physician. In a pilot study, a continuous suture of 7 stitches was applied on the fascia of the abdominal wall of multiple pigs to study this relationship. The results show that the max force in the thread of the second stitch drops from 3 (SD 1.2 to 1 (SD 0.3 newton after the 4(th stitch was placed. During placement of the 5(th, 6(th and 7(th stitch, the force in the 2(nd stitch was not influenced anymore. This study indicates that in a continuous suture the force in the thread remains constant up to more than 3 stiches away from the pulled loose end of the suture. When a force feedback tool is developed specially for suturing in surgery on patients, the proposed sensors can be used to determine safety threshold for different types of tissue and sutures.

  20. Force sensing in surgical sutures.

    Science.gov (United States)

    Horeman, Tim; Meijer, Evert-Jan; Harlaar, Joris J; Lange, Johan F; van den Dobbelsteen, John J; Dankelman, Jenny

    2013-01-01

    The tension in a suture is an important factor in the process of wound healing. If there is too much tension in the suture, the blood flow is restricted and necrosis can occur. If the tension is too low, the incision opens up and cannot heal properly. The purpose of this paper is to describe the design and evaluation of the Stitch Force (SF) sensor and the Hook-In Force (HIF) sensor. These sensors were developed to measure the force on a tensioned suture inside a closed incision and to measure the pulling force used to close the incision. The accuracy of both sensors is high enough to determine the relation between the force in the thread of a stitch and the pulling force applied on the suture by the physician. In a pilot study, a continuous suture of 7 stitches was applied on the fascia of the abdominal wall of multiple pigs to study this relationship. The results show that the max force in the thread of the second stitch drops from 3 (SD 1.2) to 1 (SD 0.3) newton after the 4(th) stitch was placed. During placement of the 5(th), 6(th) and 7(th) stitch, the force in the 2(nd) stitch was not influenced anymore. This study indicates that in a continuous suture the force in the thread remains constant up to more than 3 stiches away from the pulled loose end of the suture. When a force feedback tool is developed specially for suturing in surgery on patients, the proposed sensors can be used to determine safety threshold for different types of tissue and sutures.

  1. Differential force balances during levitation

    Science.gov (United States)

    Todd, Paul

    The simplest arithmetic of inertial, buoyant, magnetic and electrokinetic levitation is explored in the context of a model living system with “acceleration-sensitive structures” in which motion, if allowed, produces a biological effect. The simple model is a finite-sized object enclosed within another finite-sized object suspended in an outer fluid (liquid or vapor) medium. The inner object has density and electrical and magnetic properties quantitatively different from those of the outer object and the medium. In inertial levitation (“weightlessness”) inertial accelerations are balanced, and the forces due to them are canceled in accordance with Newton’s third law. In the presence of inertial acceleration (gravity, centrifugal) motionlessness depends on a balance between the levitating force and the inertial force. If the inner and outer objects differ in density one or the other will be subjected to an unbalanced force when one object is levitated by any other force (buoyant, magnetic, electrokinetic). The requirements for motionlessness of the internal object in the presence of a levitating force are equality of density in the case of buoyant levitation, equality of magnetic susceptibility in the case of magnetic levitation, and equality of zeta potential and dielectric constant in the case of electrokinetic levitation. Examples of internal “acceleration-sensitive structures” are cellular organelles and the organs of advanced plants and animals. For these structures fundamental physical data are important in the interpretation of the effects of forces used for levitation.

  2. Climate forcing by anthropogenic aerosols

    Science.gov (United States)

    Charlson, R. J.; Schwartz, S. E.; Hales, J. M.; Cess, R. D.; Coakley, J. A., Jr.; Hansen, J. E.; Hofmann, D. J.

    1992-01-01

    Although long considered to be of marginal importance to global climate change, tropospheric aerosol contributes substantially to radiative forcing, and anthropogenic sulfate aerosol, in particular, has imposed a major perturbation to this forcing. Both the direct scattering of short-wavelength solar radiation and the modification of the shortwave reflective properties of clouds by sulfate aerosol particles increase planetary albedo, thereby exerting a cooling influence on the planet. Current climate forcing due to anthropogenic sulfate is estimated to be -1 to -2 watts per square meter, globally averaged. This perturbation is comparable in magnitude to current anthropogenic greenhouse gas forcing but opposite in sign. Thus, the aerosol forcing has likely offset global greenhouse warming to a substantial degree. However, differences in geographical and seasonal distributions of these forcings preclude any simple compensation. Aerosol effects must be taken into account in evaluating anthropogenic influences on past, current, and projected future climate and in formulating policy regarding controls on emission of greenhouse gases and sulfur dioxide. Resolution of such policy issues requires integrated research on the magnitude and geographical distribution of aerosol climate forcing and on the controlling chemical and physical processes.

  3. Climate forcing by anthropogenic aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Charlson, R.J.; Schwartz, S.E.; Hales, J.M.; Cess, R.D.; Coakley, J.A. Jr.; Hansen, J.E.; Hofmann, D.J. (University of Washington, Seattle, WA (USA). Inst. for Environmental Studies, Dept. of Atmospheric Sciences)

    1992-01-24

    Although long considered to be of marginal importance to global climate change, tropospheric aerosol contributes substantially to radiative forcing, and anthropogenic sulfate aerosol in particular has imposed a major perturbation to this forcing. Both the direct scattering of short wavelength solar radiation and the modification of the shortwave reflective properties of clouds by sulfate aerosol particles increase planetary albedo, thereby exerting a cooling influence on the planet. Current climate forcing due to anthropogenic sulfate is estimated to be -1 to -2 watts per square metre, globally averaged. This perturbation is comparable in magnitude to current anthropogenic greenhouse gas forcing but opposite in sign. Thus, the aerosol forcing has likely offset global greenhouse warming to a substantial degree. However, differences in geographical and seasonal distributions of these forcings preclude any simple compensation. Aerosol effects must be taken into account in evaluating anthropogenic influences on past, current, and projected future climate and in formulating policy regarding controls on emission of greenhouse gases and sulfur dioxide. Resolution of such policy issues requires integrated research on the magnitude and geographical distribution of aerosol climate forcing and on the controlling chemical and physical processes. 73 refs., 4 figs., 2 tabs.

  4. Embedded Media - A Force Multiplier or Force Divider

    National Research Council Canada - National Science Library

    Sipes, John A

    2006-01-01

    .... forces operating in Iraq. Some had preconceived agendas about how they were going to exploit the terrible horrors they were about to encounter in an effort to degrade the military leadership, dissuade the civilian leadership...

  5. Contractors on the Battlefield Force Multipliers or Force Dividers?

    National Research Council Canada - National Science Library

    Nelson, Kim

    2000-01-01

    .... An increased reliance on contractor support has helped ease the burden on a heavily reduced force structure, but has left military commanders vulnerable to declaring a non-mission capable status during times of crisis...

  6. Radiohumeral stability to forced translation

    DEFF Research Database (Denmark)

    Jensen, Steen Lund; Olsen, Bo Sanderhoff; Seki, Atsuhito

    2002-01-01

    Radiohumeral stability to forced translation was experimentally analyzed in 8 osteocartilaginous joint preparations. The joints were dislocated in 8 centrifugal directions at 12 different combinations of joint flexion and rotation while a constant joint compression force of 23 N was applied....... Stability was measured as the maximum resistance to translation. On average, the specimens could resist a transverse force of 16.4 N (range, 13.0-19.1 N). Stability was greater in some directions than in others. Rotating the joint changed the direction at which stability was greatest, whereas joint flexion...

  7. Optimization of Force Balancing Mechanisms

    Science.gov (United States)

    1982-03-01

    2) The derivation of generalized force starts from the principle of virtual work (see Ref. 4); i.e., 6W = 0 (3-3) 15 y q th SoRs io L 0 3PRIN I J Y Q...I I OYT Figure 3- ierFoc-aacigSse 16 The virtual work due to the applied force during the virtual displacement is 6W = FT 6r (3-4) where F = applied...the virtual work done by equilibrators and by external forces be 6Weq and 6W ex, respectively. Then the virtual work done by r linear spring

  8. Consistent force fields for saccharides

    DEFF Research Database (Denmark)

    Rasmussen, Kjeld

    1999-01-01

    Consistent force fields for carbohydrates were hitherto developed by extensive optimization ofpotential energy function parameters on experimental data and on ab initio results. A wide range of experimental data is used: internal structures obtained from gas phase electron diffraction and from x......-anomeric effects are accounted for without addition of specific terms. The work is done in the framework of the Consistent Force Field which originatedin Israel and was further developed in Denmark. The actual methods and strategies employed havebeen described previously. Extensive testing of the force field...

  9. Command in the Objective Force

    National Research Council Canada - National Science Library

    Wilbeck, Christopher

    2003-01-01

    This paper seeks to answer what type of command will best serve the Army's Objective Force in gaining the initiative, building momentum, and exploiting success to achieve land dominance in the future...

  10. US Air Force Balloon Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Worksheets containing pilot balloon data computed from releases at Air Force stations in the western United States. Elevation and azimuth angles are used to compute...

  11. Centrifugal force: a few surprises

    International Nuclear Information System (INIS)

    Abramowicz, M.A.; Max-Planck-Institut fuer Physik und Astrophysik, Garching

    1990-01-01

    The need for a rather fundamental revision in understanding of the nature of the centrifugal force is discussed. It is shown that in general relativity (and contrary to the situation in Newtonian theory) rotation of a reference frame is a necessary but not sufficient condition for the centrifugal force to appear. A sufficient condition for its appearance, in the instantaneously corotating reference frame of a particle, is that the particle motion in space (observed in the global rest frame) differs from a photon trajectory. The direction of the force is the same as that of the gradient of the effective potential for photon motion. In some cases, the centrifugal force will attract towards the axis of rotation. (author)

  12. Voice Force tulekul / Tõnu Ojala

    Index Scriptorium Estoniae

    Ojala, Tõnu, 1969-

    2005-01-01

    60. sünnipäeva tähistava Tallinna Tehnikaülikooli Akadeemilise Meeskoori juubelihooaja üritusest - a capella pop-gruppide festivalist Voice Force (kontserdid 12. nov. klubis Parlament ja 3. dets. Vene Kultuurikeskuses)

  13. Teleoperation with virtual force feedback

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.J.

    1993-08-01

    In this paper we describe an algorithm for generating virtual forces in a bilateral teleoperator system. The virtual forces are generated from a world model and are used to provide real-time obstacle avoidance and guidance capabilities. The algorithm requires that the slaves tool and every object in the environment be decomposed into convex polyhedral Primitives. Intrusion distance and extraction vectors are then derived at every time step by applying Gilbert`s polyhedra distance algorithm, which has been adapted for the task. This information is then used to determine the compression and location of nonlinear virtual spring-dampers whose total force is summed and applied to the manipulator/teleoperator system. Experimental results validate the whole approach, showing that it is possible to compute the algorithm and generate realistic, useful psuedo forces for a bilateral teleoperator system using standard VME bus hardware.

  14. Active media under rotational forcing

    Science.gov (United States)

    Pérez-Villar, Vicente; Porteiro, Jose L. F.; Muñuzuri, Alberto P.

    2006-10-01

    The bubble-free Belousov-Zhabotinsky reaction has been used to study the effects of centrifugal forces on autowave propagation. The reaction parameters were chosen such that the system oscillates naturally creating target waves. In the present study, the system was forced to rotate with a constant velocity around a central axis. In studying the effects of such a forcing on the system, we focused on target dynamics. The system reacts to this forcing in different ways, the most spectacular being a dramatic increase in the period of the target, the effect growing stronger as we move away from the center of rotation. A numerical study was carried out using the two-variable Oregonator model, modified to include convective effects through the diffusion coefficient. The numerical results showed a good qualitative agreement with those of the experiments.

  15. US Air Force Base Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Hourly observations taken by U.S. Air Force personnel at bases in the United States and around the world. Foreign observations concentrated in the Middle East and...

  16. Forces in Liquid Metal Contacts

    DEFF Research Database (Denmark)

    Duggen, Lars; Mátéfi-Tempfli, Stefan

    2014-01-01

    Using rather well known theory about capillary bridges between two electrodes we calculate the tensile force that can be applied to liquid metal contacts in the micrometer regime. Assuming circular symmetry, full wetting of the electrodes, and neglecting gravity, we present a brief review of the ...... of the necessary theory and find numerically the forces to be in the 100μN range for liquid metals as mercury and liquid Gallium suspended between electrodes of 20μm radius....

  17. Productive force and labour productivity

    Directory of Open Access Journals (Sweden)

    Kulik V.I.

    2017-09-01

    Full Text Available the authors discuss productive forces of a society – work and capital, as well as two intermediaries: the intermediary between the world of the nature and the person – means of work or “fixed capital” of a society, as productive force of social activities, and the intermediary inside a society – cost in the form of money that allows to define labour productivity and structural transformations in a society.

  18. Feedback trap using optical force

    Science.gov (United States)

    Jun, Yonggun; Pak, Hyuk Kyu

    Recently, the feedback trap using electrophoretic force (ABEL trap) has been used in the experimental study of non-equilibrium thermodynamics such as Landauer's erasure principle. This trap can trap and manipulate a small particle in solution by canceling the Brownian fluctuations. Here, we propose a simple way to control a bead using optical force with feedback and show the dynamics of a single particle in the virtual potential.

  19. A New Set of Forces

    Science.gov (United States)

    2012-12-01

    correcting forces is the free market itself. Unfortunately, macroeconomic principles do not always prove useful at the microeconomic level...model for this discussion are not relevant, but the underlying principle of the model is—forces can be self-correcting. Any im- balance in one...Performance-based acqui- sition appears to be one of those principles that looks good on paper and has proved quite successful in private industry but has had

  20. Wave Forces on Windturbine Foundations

    DEFF Research Database (Denmark)

    Larsen, Brian Juul; Frigaard, Peter

    A testprogramme has been performed to determine the wave forces on two types of foundations for an offshore windturbine. the tested foundation types are a monopile and cone. Furthermore the shaft of the cone has been tested.......A testprogramme has been performed to determine the wave forces on two types of foundations for an offshore windturbine. the tested foundation types are a monopile and cone. Furthermore the shaft of the cone has been tested....

  1. A new force in nature?

    CERN Document Server

    Fischbach, Ephraim; Szafer, A; Talmadge, C; Aronson, S H

    1986-01-01

    We review recent experimental and theoretical work dealing with the proposed fifth force. Further analysis of the original Eötvös experiments has uncovered no challenges to our original assertion that these data evidence a correlation characteristic of the presence of a new coupling to baryon number or hypercharge. Various models suggest that the proposed fifth force could be accomodated naturally into the existing theoretical framework.

  2. Forces in electromagnetic field and gravitational field

    OpenAIRE

    Weng, Zihua

    2008-01-01

    The force can be defined from the linear momentum in the gravitational field and electromagnetic field. But this definition can not cover the gradient of energy. In the paper, the force will be defined from the energy and torque in a new way, which involves the gravitational force, electromagnetic force, inertial force, gradient of energy, and some other new force terms etc. One of these new force terms can be used to explain why the solar wind varies velocity along the magnetic force line in...

  3. Method of Calibrating a Force Balance

    Science.gov (United States)

    Parker, Peter A. (Inventor); Rhew, Ray D. (Inventor); Johnson, Thomas H. (Inventor); Landman, Drew (Inventor)

    2015-01-01

    A calibration system and method utilizes acceleration of a mass to generate a force on the mass. An expected value of the force is calculated based on the magnitude and acceleration of the mass. A fixture is utilized to mount the mass to a force balance, and the force balance is calibrated to provide a reading consistent with the expected force determined for a given acceleration. The acceleration can be varied to provide different expected forces, and the force balance can be calibrated for different applied forces. The acceleration may result from linear acceleration of the mass or rotational movement of the mass.

  4. Mechanical forces in skin disorders.

    Science.gov (United States)

    Hsu, Chao-Kai; Lin, Hsi-Hui; Harn, Hans I-Chen; Hughes, Michael W; Tang, Ming-Jer; Yang, Chao-Chun

    2018-03-08

    Mechanical forces are known to regulate homeostasis of the skin and play a role in the pathogenesis of skin diseases. The epidermis consists of keratinocytes that are tightly adhered to each other by cell junctions. Defects in keratins or desmosomal/hemidesmosomal proteins lead to the attenuation of mechanical strength and formation of intraepidermal blisters in the case of epidermolysis bullosa simplex. The dermis is rich in extracellular matrix, especially collagen, and provides the majority of tensile force in the skin. Keloid and hypertrophic scar, which is the result of over-production of collagen by fibroblasts during the wound healing, are associated with extrinsic tensile forces and changes of intrinsic mechanical properties of the cell. Increasing evidences shows that stiffness of the skin environment determines the regenerative ability during wound healing process. Mechanotransduction pathways are also involved in the morphogenesis and cyclic growth of hair follicles. The development of androgenetic alopecia is correlated to tensile forces generated by the fibrous tissue underlying the scalp. Acral melanoma predominantly occurs in the weight-bearing area of the foot suggesting the role of mechanical stress. Increased dermal stiffness from fibrosis might be the cause of recessive dystrophic epidermolysis bullosa associated squamous cell carcinoma. Strategies to change the mechanical forces or modify the mechanotransduction signals may lead to a new way to treat skin diseases and promote skin regeneration. Copyright © 2018 Japanese Society for Investigative Dermatology. Published by Elsevier B.V. All rights reserved.

  5. BUILDING AN EFFECTIVE SALES FORCE

    Directory of Open Access Journals (Sweden)

    Ioana Olariu

    2016-06-01

    Full Text Available Building an effective sales force starts with selecting good salespeople, but good salespeople are very difficult to find. The reason for this is that most sales jobs are very demanding and require a great deal from the salesperson. There are many different types of sales jobs. Before it can hire salespeople, each company must do a careful job analysis to see what particular types of selling and other skills are necessary for each sales job. One task of the market planner is to establish clear objectives each year for the entire sales force, for each region, each sales office, and each salesperson. Sales jobs are different from in-house jobs in some significant ways. Nevertheless, each company must continually work on building and maintaining an effective sales force using the following steps: recruitment, selection, training, compensation and evaluation of each salesperson.

  6. Forced draft wet cooling systems

    International Nuclear Information System (INIS)

    Daubert, A.; Caudron, L.; Viollet, P.L.

    1975-01-01

    The disposal of the heat released from a 1000MW power plant needs a natural draft tower of about 130m of diameter at the base, and 170m height, or a cooling system with a draft forced by about forty vans, a hundred meters in diameter, and thirty meters height. The plumes from atmospheric cooling systems form, in terms of fluid mechanics, hot jets in a cross current. They consist in complex flows that must be finely investigated with experimental and computer means. The study, currently being performed at the National Hydraulics Laboratory, shows that as far as the length and height of visible plumes are concerned, the comparison is favorable to some types of forced draft cooling system, for low and medium velocities, (below 5 or 6m/s at 10m height. Beyond these velocities, the forced draft sends the plume up to smaller heights, but the plume is generally more dilute [fr

  7. CD Review: Tour de Force

    Directory of Open Access Journals (Sweden)

    Diana Golden

    2016-10-01

    Full Text Available Review of Tour de Force, the third album from C Force, an ensemble comprised of flutist Christine Gangelhoff, euphoniumist Christian Justilien, and pianist Christy Lee. With repertoire spanning over two centuries, the trio embarks on a musical tour to Guadaloupe, Jamaica, and Haiti on Disc One, and then Trinidad and Tobago, Curaçao, the U.S. Virgin Islands and the Bahamas on Disc Two. Just as the eclectic album artwork by John Cox might suggest, Tour de Force provides listeners with a sense of the rich tapestry of musical connections shared in art music across the Caribbean. This two-disc set (released March 2016 was recorded at the Performing Arts Center of The College of The Bahamas and produced by Terry Manning of Lucky Seven Records.

  8. Optimizing Global Force Management for Special Operations Forces

    Science.gov (United States)

    2016-12-01

    for Global Force Management. This tool empowers the analyst to conduct timely what-if analysis and easily develop alternate courses of action... Journal of Operational Research , 23(3): 367–381. Bradley, JH (2016) Mission attribute hierarchy, data for mission prioritization and requests, draft...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release. Distribution is unlimited. OPTIMIZING GLOBAL

  9. Imaging and force probing RNA by atomic force microscopy

    NARCIS (Netherlands)

    Schön, Peter Manfred

    2016-01-01

    In the past 30 years, the atomic force microscope (AFM) has become a true enabling platform in the life sciences opening entire novel avenues for structural and dynamic studies of biological systems. It enables visualization, probing and manipulation across the length scales, from single molecules

  10. Keeping Special Forces Special: Regional Proficiency in Special Forces

    Science.gov (United States)

    2011-12-01

    communicating and teaching across intercultural barriers. Special Forces Soldiers use their interpersonal skills to obtain and maintain appropriate...or in a simulated environment with native speakers .”258 Immersion programs were “overwhelmingly described as effective and useful” by the LCNA...target language increases intercultural adjustment.”263

  11. Force-Time Entropy of Isometric Impulse.

    Science.gov (United States)

    Hsieh, Tsung-Yu; Newell, Karl M

    2016-01-01

    The relation between force and temporal variability in discrete impulse production has been viewed as independent (R. A. Schmidt, H. Zelaznik, B. Hawkins, J. S. Frank, & J. T. Quinn, 1979 ) or dependent on the rate of force (L. G. Carlton & K. M. Newell, 1993 ). Two experiments in an isometric single finger force task investigated the joint force-time entropy with (a) fixed time to peak force and different percentages of force level and (b) fixed percentage of force level and different times to peak force. The results showed that the peak force variability increased either with the increment of force level or through a shorter time to peak force that also reduced timing error variability. The peak force entropy and entropy of time to peak force increased on the respective dimension as the parameter conditions approached either maximum force or a minimum rate of force production. The findings show that force error and timing error are dependent but complementary when considered in the same framework with the joint force-time entropy at a minimum in the middle parameter range of discrete impulse.

  12. Automatic HTS force measurement instrument

    Science.gov (United States)

    Sanders, S.T.; Niemann, R.C.

    1999-03-30

    A device is disclosed for measuring the levitation force of a high temperature superconductor sample with respect to a reference magnet includes a receptacle for holding several high temperature superconductor samples each cooled to superconducting temperature. A rotatable carousel successively locates a selected one of the high temperature superconductor samples in registry with the reference magnet. Mechanism varies the distance between one of the high temperature superconductor samples and the reference magnet, and a sensor measures levitation force of the sample as a function of the distance between the reference magnet and the sample. A method is also disclosed. 3 figs.

  13. Wave Forces on Crown Walls

    DEFF Research Database (Denmark)

    Pedersen, Jan; Burcharth, H. F.

    1993-01-01

    This paper presents some of the results from a large parametric laboratory study including more than 200 long-duration model tests. The study addresses both the wave forces imposed on the breakwater crown wall as well as the performance of the structure in reducing the wave overtopping. The testing...... programme includes variations of the sea state parameters and of the geometrical configuration of the breakwater and crown wall. Basic relations between forces/overtopping and the varied parameters are examined and preliminary design guidelines for structures within the tested range of variations...

  14. A downward buoyant force experiment

    OpenAIRE

    Lima,F.M.S.; Venceslau,G.M.; Brasil,G.T.

    2014-01-01

    In hydrostatics, the Archimedes principle predicts an upward force whenever a body is submerged in a liquid. In contrast to common sense, this physical law is not free of exceptions, as for example when the body touches the container. This is more evident when a rectangular block less dense than the liquid rests on the bottom, with no liquid underneath it, a case in which a downward force is expected, according to a recent work by the first author. In the present work, we describe a simple, l...

  15. 77 FR 30875 - Armed Forces Day, 2012

    Science.gov (United States)

    2012-05-23

    ... Documents#0;#0; ] Proclamation 8823 of May 18, 2012 Armed Forces Day, 2012 By the President of the United... circumstances. On Armed Forces Day, we pay tribute to the unparalleled service of our Armed Forces and recall... the greatest force for freedom and security the world has ever known. From their earliest training to...

  16. Constructive consequences of leaders' forcing influence styles

    NARCIS (Netherlands)

    Emans, B.J.M.; Munduate, L; Klaver, E; Van de Vliert, E.

    In contrast to non-forcing influence styles used by leaders, their forcing influence styles are commonly found to be ineffective, evoking sheer resistance, rather than compliance. As a corollary of conglomerate conflict behavior theory, we state that forcing, if combined with non-forcing, may

  17. Deriving force field parameters for coordination complexes

    DEFF Research Database (Denmark)

    Norrby, Per-Ola; Brandt, Peter

    2001-01-01

    The process of deriving molecular mechanics force fields for coordination complexes is outlined. Force field basics are introduced with an emphasis on special requirements for metal complexes. The review is then focused on how to set up the initial model, define the target, refine the parameters......, and validate the final force field, Alternatives to force field derivation are discussed briefly....

  18. Security force effectiveness and technology

    International Nuclear Information System (INIS)

    Seaton, M.B.

    1988-01-01

    No one would propose ineffective security forces. Applied technology always has, as its purpose, to increase effectiveness. Evidence exists, however, that poorly conceived or executed technological solutions can actually do more harm than good. The author argues for improved human factor considerations in physical security applied technology -- especially in the area of security console operations

  19. Force balancing in mammographic compression

    NARCIS (Netherlands)

    Branderhorst, W.; de Groot, J. E.; Neeter, L. M. F. H.; van Lier, M. G. J. T. B.; Neeleman, C.; den Heeten, G. J.; Grimbergen, C. A.

    2016-01-01

    In mammography, the height of the image receptor is adjusted to the patient before compressing the breast. An inadequate height setting can result in an imbalance between the forces applied by the image receptor and the paddle, causing the clamped breast to be pushed up or down relative to the body

  20. NASA's Big Data Task Force

    Science.gov (United States)

    Holmes, C. P.; Kinter, J. L.; Beebe, R. F.; Feigelson, E.; Hurlburt, N. E.; Mentzel, C.; Smith, G.; Tino, C.; Walker, R. J.

    2017-12-01

    Two years ago NASA established the Ad Hoc Big Data Task Force (BDTF - https://science.nasa.gov/science-committee/subcommittees/big-data-task-force), an advisory working group with the NASA Advisory Council system. The scope of the Task Force included all NASA Big Data programs, projects, missions, and activities. The Task Force focused on such topics as exploring the existing and planned evolution of NASA's science data cyber-infrastructure that supports broad access to data repositories for NASA Science Mission Directorate missions; best practices within NASA, other Federal agencies, private industry and research institutions; and Federal initiatives related to big data and data access. The BDTF has completed its two-year term and produced several recommendations plus four white papers for NASA's Science Mission Directorate. This presentation will discuss the activities and results of the TF including summaries of key points from its focused study topics. The paper serves as an introduction to the papers following in this ESSI session.

  1. Coffee Cup Atomic Force Microscopy

    Science.gov (United States)

    Ashkenaz, David E.; Hall, W. Paige; Haynes, Christy L.; Hicks, Erin M.; McFarland, Adam D.; Sherry, Leif J.; Stuart, Douglas A.; Wheeler, Korin E.; Yonzon, Chanda R.; Zhao, Jing; Godwin, Hilary A.; Van Duyne, Richard P.

    2010-01-01

    In this activity, students use a model created from a coffee cup or cardstock cutout to explore the working principle of an atomic force microscope (AFM). Students manipulate a model of an AFM, using it to examine various objects to retrieve topographic data and then graph and interpret results. The students observe that movement of the AFM…

  2. Inertial forces and physics teaching

    International Nuclear Information System (INIS)

    Oliva Martinez, J.M.; Pontes Pedrajas, A.

    1996-01-01

    An epistemological and didactic analysis about inertial forces and the role of validity of Newton's Laws seen from several reference systems is performed. On the basis of considerations fulfilled, a discussion about the necessity of introducing these topics in the curriculum of physics teaching at different levels is also carried out. (Author) 21 refs

  3. Air Force Heroes in Vietnam

    Science.gov (United States)

    1979-01-01

    Forces of the United States and South Vietnam. A modified version was employed for psychological warfare, including leaflet drops and loudspeaker...out of that spot ten seconds when mortars started dropping directly on it," he remembers. "That was a real thriller . I figured they just got zeroed in

  4. A Qualitative Force Structure Analysis of the Global Mobility Task Force

    Science.gov (United States)

    2003-06-01

    Force GSTF Global Strike Task Force HLSTF Homeland Response Task Force HUMRO Humanitarian Relief Operation ISR Intelligence...Task Force (S&C4ISRTF) 3. Global Strike Task Force ( GSTF ) 4. Global Response Task Force (GRTF) 5. Homeland Security Task Force (HLSTF) 6. Global...enable the “ GSTF and GRTF to deploy and employ rapidly anywhere in the world at any time” (DAF, 2002:16). Therefore, the GMTF has three key

  5. Special Operations Forces and Conventional Forces: Integration, Interoperability, and Interdependence

    Science.gov (United States)

    2016-12-07

    commanding general of the 4th Infantry Division (ID), had a short meeting with incoming and outgoing special operations leadership. The topic: how...like in the opening days of Operation Enduring Freedom in Afghanistan . U.S. forces were not always open to this sort of synergy, but the last 15...capability to work well together in large-scale military operations, such as in Afghanistan , where they conducted village sta- bility operations and built

  6. Lorentz force actuation of a heated atomic force microscope cantilever.

    Science.gov (United States)

    Lee, Byeonghee; Prater, Craig B; King, William P

    2012-02-10

    We report Lorentz force-induced actuation of a silicon microcantilever having an integrated resistive heater. Oscillating current through the cantilever interacts with the magnetic field around a NdFeB permanent magnet and induces a Lorentz force that deflects the cantilever. The same current induces cantilever heating. With AC currents as low as 0.2 mA, the cantilever can be oscillated as much as 80 nm at resonance with a DC temperature rise of less than 5 °C. By comparison, the AC temperature variation leads to a thermomechanical oscillation that is about 1000 times smaller than the Lorentz deflection at the cantilever resonance. The cantilever position in the nonuniform magnetic field affects the Lorentz force-induced deflection, with the magnetic field parallel to the cantilever having the largest effect on cantilever actuation. We demonstrate how the cantilever actuation can be used for imaging, and for measuring the local material softening temperature by sensing the contact resonance shift.

  7. Force Reproduction Error Depends on Force Level, whereas the Position Reproduction Error Does Not

    NARCIS (Netherlands)

    Onneweer, B.; Mugge, W.; Schouten, Alfred Christiaan

    2016-01-01

    When reproducing a previously perceived force or position humans make systematic errors. This study determined the effect of force level on force and position reproduction, when both target and reproduction force are self-generated with the same hand. Subjects performed force reproduction tasks at

  8. Physicists' Forced Migrations under Hitler

    Science.gov (United States)

    Beyerchen, Alan

    2011-03-01

    When the Nazis came to power in early 1933 they initiated formal and informal measures that forced Jews and political opponents from public institutions such as universities. Some physicists retired and others went into industry, but most emigrated. International communication and contact made emigration a viable option despite the desperate economic times in the Great Depression. Another wave of emigrations followed the annexation of Austria in 1938. Individual cases as well as general patterns of migration and adaptation to new environments will be examined in this presentation. One important result of the forced migrations was that many of the physicists expelled under Hitler played important roles in strengthening physics elsewhere, often on the Allied side in World War II.

  9. The nature of motive force

    CERN Document Server

    Pramanick, Achintya Kumar

    2014-01-01

    In this monograph Prof. Pramanick explicates the law of motive force, a fundamental law of nature that can be observed and appreciated as an addition to the existing laws of thermodynamics. This unmistakable and remarkable tendency of nature is equally applicable to all other branches of studies. He first conceptualized the law of motive force in 1989, when he was an undergraduate student. Here he reports various applications of the law in the area of  thermodynamics, heat transfer, fluid mechanics and solid mechanics, and shows how it is possible to solve analytically century-old unsolved problems through its application. This book offers a comprehensive account of the law and its relation to other laws and principles, such as the generalized conservation principle, variational formulation, Fermat’s principle, Bejan’s constructal law, entropy generation minimization, Bejan’s method of intersecting asymptotes and equipartition principle. Furthermore, the author addresses some interrelated fundamental p...

  10. Archimedes force on Casimir apparatus

    Directory of Open Access Journals (Sweden)

    Shevchenko V.

    2016-01-01

    Full Text Available The talk addresses a problem of Casimir apparatus in weak gravitational field, surrounded by a dense medium. The falling of the apparatus has to be governed by the equivalence principle, taking into account proper contributions to the weight of the apparatus from its material part and from distorted quantum fields. We discuss general ex pression for the corresponding force in terms of the effective action. By way of example we compute explicit expression for Archimedes force, acting on the Casimir apparatus of finite size, immersed into thermal bath of free scalar field. It is shown that besides universal term, proportional to the volume of the apparatus, there are non-universal quantum corrections, depending on the boundary conditions.

  11. Electronic transitions and intermolecular forces

    International Nuclear Information System (INIS)

    Hemert, M.C. van.

    1981-01-01

    This thesis describes two different subjects - electronic transitions and intermolecular forces - that are related mainly by the following observation: The wavenumber at which an electronic transition in an atom or molecule occurs, depends on the environment of that atom or molecule. This implies, for instance, that when a molecule becomes solvated its absorption spectrum may be shifted either to the blue or to the red side of the original gasphase spectrum. In part I attention is paid to the experimental aspects of VUV spectroscopy, both in the gasphase and in the condensed phase. In part II a series of papers are presented, dealing with the calculation of intermolecular forces (and some related topics) both for the ground state and for the excited state interactions, using different non-empirical methods. The calculations provide, among other results, a semiquantitative interpretation of the spectral blue shifts encountered in our experiments. (Auth.)

  12. Chiral forces and molecular dissymmetry

    International Nuclear Information System (INIS)

    Mohan, R.

    1992-01-01

    Chiral molecules leading to helical macromolecules seem to preserve information and extend it better. In the biological world RNA is the very paradigm for self-replication, elongation and autocatalytic editing. The nucleic acid itself is not chiral. It acquires its chirality by association with D-sugars. Although the chiral information or selectivity put in by the unit monomer is no longer of much interest to the biologists - they tend to leave it to the Darwinian selection principle to take care of it as illustrated by Frank's model - it is vital to understand the origin of chirality. There are three different approaches for the chiral origin of life: (1) Phenomenological, (2) Electromagnetic molecular and Coriolis forces and (3) Atomic or nuclear force, the neutral weak current. The phenomenological approach involves spontaneous symmetry breaking fluctuations in far for equilibrium systems or nucleation and crystallization. Chance plays a major role in the chiral molecule selected

  13. Multistage Force Amplification of Piezoelectric Stacks

    Science.gov (United States)

    Xu, Tian-Bing (Inventor); Siochi, Emilie J. (Inventor); Zuo, Lei (Inventor); Jiang, Xiaoning (Inventor); Kang, Jin Ho (Inventor)

    2015-01-01

    Embodiments of the disclosure include an apparatus and methods for using a piezoelectric device, that includes an outer flextensional casing, a first cell and a last cell serially coupled to each other and coupled to the outer flextensional casing such that each cell having a flextensional cell structure and each cell receives an input force and provides an output force that is amplified based on the input force. The apparatus further includes a piezoelectric stack coupled to each cell such that the piezoelectric stack of each cell provides piezoelectric energy based on the output force for each cell. Further, the last cell receives an input force that is the output force from the first cell and the last cell provides an output apparatus force In addition, the piezoelectric energy harvested is based on the output apparatus force. Moreover, the apparatus provides displacement based on the output apparatus force.

  14. Graphene cantilever under Casimir force

    Science.gov (United States)

    Derras-Chouk, Amel; Chudnovsky, Eugene M.; Garanin, Dmitry A.; Jaafar, Reem

    2018-05-01

    The stability of graphene cantilever under Casimir attraction to an underlying conductor is investigated. The dependence of the instability threshold on temperature and flexural rigidity is obtained. Analytical work is supplemented by numerical computation of the critical temperature above which the graphene cantilever irreversibly bends down and attaches to the conductor. The geometry of the attachment and exfoliation of the graphene sheet is discussed. It is argued that graphene cantilever can be an excellent tool for precision measurements of the Casimir force.

  15. Forcing preschool children with food

    OpenAIRE

    Šterbenc, Urška

    2015-01-01

    In our thesis we primarily focused on how to get our preschool children to eat healthy without having to force them into it. Most adults have at least one negative childhood eating experience, nonetheless they still use inappropriate principles or techniques when it comes to encouraging their children towards a healthy and balanced diet. Parents often forget they have to set a proper example for their children, since they are known to take up eating habits from their parents. Nowadays, a chil...

  16. Effective forcing with Cantor manifolds

    OpenAIRE

    Kihara, Takayuki

    2017-01-01

    A set $A$ of integers is called total if there is an algorithm which, given an enumeration of $A$, enumerates the complement of $A$, and called cototal if there is an algorithm which, given an enumeration of the complement of $A$, enumerates $A$. Many variants of totality and cototality have been studied in computability theory. In this note, by an effective forcing construction with strongly infinite dimensional Cantor manifolds, which can be viewed as an effectivization of Zapletal's "half-...

  17. Considerations upon sales force management

    OpenAIRE

    Codruţ Dura

    2004-01-01

    Sales management involves sales planning (the process of establishing a broad set of goals, policies and procedures for achieving objectives), organizing the sales function (by establishing sales organizations structured geographically, by product types, by market or customer classes, or by function), staffing the sales function (including recruiting salespeople and interviewing, testing and hiring them), directing the sales force (via training and motivating) and evaluating and controlling s...

  18. Observations on the ponderomotive force

    Science.gov (United States)

    Burton, D. A.; Cairns, R. A.; Ersfeld, B.; Noble, A.; Yoffe, S.; Jaroszynski, D. A.

    2017-05-01

    The ponderomotive force is an important concept in plasma physics and, in particular, plays an important role in many aspects of the theory of laser plasma interactions including current concerns like wakefield acceleration and Raman amplification. The most familiar form of this gives a force on a charged particle that is proportional to the slowly varying gradient of the intensity of a high frequency electromagnetic field and directed down the intensity gradiant. For a field amplitude simply oscillating in time there is a simple derivation of this formula, but in the more general case of a travelling wave the problem is more difficult. Over the years there has been much work on this using Hamiltonian or Lagrangian averaging techniques, but little or no investigation of how well these theories work. Here we look at the very basic problem of a particle entering a region with a monotonically increasing electrostatic field amplitude and being reflected. We show that the equation of motion derived from a widely quoted ponderomotive potential only agrees with the numerically computed orbit within a restricted parameter range and that outside this range it shows features which are inconsistent with any ponderomotive potential quadratic in the field amplitude. Since the ponderomotive force plays a fundamental role in a variety of problems in plasma physics we think that it is important to point out that even in the simplest of configurations standard theories may not be accurate.

  19. Origin of Knudsen forces on heated microbeams

    KAUST Repository

    Zhu, Taishan

    2010-09-09

    The presented work probes the fundamentals of Knudsen forces. Using the direct simulation Monte Carlo (DSMC) method, the flows induced by temperature inhomogeneity within a representative configuration and the Knudsen force acting on a heated microbeam are captured as functions of Knudsen number in the entire flow regime. Both flow strength and Knudsen force peak in the transition regime and negative Knudsen force absent in experimental data is observed. The mechanisms of the thermally induced flows and Knudsen forces are studied. It has been found that thermal edge flow is the main driven source for the formation of the Knudsen force on microbeams and domain configuration plays an important role in the process.

  20. Kelvin probe force microscopy in liquid using electrochemical force microscopy.

    Science.gov (United States)

    Collins, Liam; Jesse, Stephen; Kilpatrick, Jason I; Tselev, Alexander; Okatan, M Baris; Kalinin, Sergei V; Rodriguez, Brian J

    2015-01-01

    Conventional closed loop-Kelvin probe force microscopy (KPFM) has emerged as a powerful technique for probing electric and transport phenomena at the solid-gas interface. The extension of KPFM capabilities to probe electrostatic and electrochemical phenomena at the solid-liquid interface is of interest for a broad range of applications from energy storage to biological systems. However, the operation of KPFM implicitly relies on the presence of a linear lossless dielectric in the probe-sample gap, a condition which is violated for ionically-active liquids (e.g., when diffuse charge dynamics are present). Here, electrostatic and electrochemical measurements are demonstrated in ionically-active (polar isopropanol, milli-Q water and aqueous NaCl) and ionically-inactive (non-polar decane) liquids by electrochemical force microscopy (EcFM), a multidimensional (i.e., bias- and time-resolved) spectroscopy method. In the absence of mobile charges (ambient and non-polar liquids), KPFM and EcFM are both feasible, yielding comparable contact potential difference (CPD) values. In ionically-active liquids, KPFM is not possible and EcFM can be used to measure the dynamic CPD and a rich spectrum of information pertaining to charge screening, ion diffusion, and electrochemical processes (e.g., Faradaic reactions). EcFM measurements conducted in isopropanol and milli-Q water over Au and highly ordered pyrolytic graphite electrodes demonstrate both sample- and solvent-dependent features. Finally, the feasibility of using EcFM as a local force-based mapping technique of material-dependent electrostatic and electrochemical response is investigated. The resultant high dimensional dataset is visualized using a purely statistical approach that does not require a priori physical models, allowing for qualitative mapping of electrostatic and electrochemical material properties at the solid-liquid interface.

  1. Kelvin probe force microscopy in liquid using electrochemical force microscopy

    Directory of Open Access Journals (Sweden)

    Liam Collins

    2015-01-01

    Full Text Available Conventional closed loop-Kelvin probe force microscopy (KPFM has emerged as a powerful technique for probing electric and transport phenomena at the solid–gas interface. The extension of KPFM capabilities to probe electrostatic and electrochemical phenomena at the solid–liquid interface is of interest for a broad range of applications from energy storage to biological systems. However, the operation of KPFM implicitly relies on the presence of a linear lossless dielectric in the probe–sample gap, a condition which is violated for ionically-active liquids (e.g., when diffuse charge dynamics are present. Here, electrostatic and electrochemical measurements are demonstrated in ionically-active (polar isopropanol, milli-Q water and aqueous NaCl and ionically-inactive (non-polar decane liquids by electrochemical force microscopy (EcFM, a multidimensional (i.e., bias- and time-resolved spectroscopy method. In the absence of mobile charges (ambient and non-polar liquids, KPFM and EcFM are both feasible, yielding comparable contact potential difference (CPD values. In ionically-active liquids, KPFM is not possible and EcFM can be used to measure the dynamic CPD and a rich spectrum of information pertaining to charge screening, ion diffusion, and electrochemical processes (e.g., Faradaic reactions. EcFM measurements conducted in isopropanol and milli-Q water over Au and highly ordered pyrolytic graphite electrodes demonstrate both sample- and solvent-dependent features. Finally, the feasibility of using EcFM as a local force-based mapping technique of material-dependent electrostatic and electrochemical response is investigated. The resultant high dimensional dataset is visualized using a purely statistical approach that does not require a priori physical models, allowing for qualitative mapping of electrostatic and electrochemical material properties at the solid–liquid interface.

  2. Single molecule atomic force microscopy and force spectroscopy of chitosan.

    Science.gov (United States)

    Kocun, Marta; Grandbois, Michel; Cuccia, Louis A

    2011-02-01

    Atomic force microscopy (AFM) and AFM-based force spectroscopy was used to study the desorption of individual chitosan polymer chains from substrates with varying chemical composition. AFM images of chitosan adsorbed onto a flat mica substrate show elongated single strands or aggregated bundles. The aggregated state of the polymer is consistent with the high level of flexibility and mobility expected for a highly positively charged polymer strand. Conversely, the visualization of elongated strands indicated the presence of stabilizing interactions with the substrate. Surfaces with varying chemical composition (glass, self-assembled monolayer of mercaptoundecanoic acid/decanethiol and polytetrafluoroethylene (PTFE)) were probed with chitosan modified AFM tips and the corresponding desorption energies, calculated from plateau-like features, were attributed to the desorption of individual polymer strands. Desorption energies of 2.0±0.3×10(-20)J, 1.8±0.3×10(-20)J and 3.5±0.3×10(-20)J were obtained for glass, SAM of mercaptoundecanoic/dodecanethiol and PTFE, respectively. These single molecule level results can be used as a basis for investigating chitosan and chitosan-based materials for biomaterial applications. Copyright © 2010 Elsevier B.V. All rights reserved.

  3. Special Forces Command and Control in Afghanistan

    National Research Council Canada - National Science Library

    Rhyne, Richard

    2004-01-01

    .... The author examines how Special Forces and conventional forces worked together in the past in Vietnam, Panama, Somalia, Haiti, Bosnia-Herzegovina, and Operations Desert Storm and Desert Shield...

  4. Understanding Innovation Adoption in the Air Force

    National Research Council Canada - National Science Library

    Evans, Morgan J

    2006-01-01

    .... The United States Air Force is seeking to adapt to this new information age by transforming its business processes in order to sustain its competitive advantage as the world's most respected air force...

  5. Physical Fitness and the Expeditionary Air Force

    National Research Council Canada - National Science Library

    Lewis, Elizabeth

    2003-01-01

    ... that the Air Force bas a physical fitness program to keep its members healthy and productive. By doing this, it can ensure success in completing the Air Force mission while keeping the organization at the highest level of readiness possible...

  6. Army Forces for Operations Other Than War

    National Research Council Canada - National Science Library

    Sortor, Ronald

    1997-01-01

    ... contingencies influence the readiness and availability of Army forces to deploy to an MRC? We examine OOTW missions performed by the Army since 1975 and plans for possible future operations in order to define force requirements for OOTW...

  7. Grasp force sensor for robotic hands

    Science.gov (United States)

    Scheinman, Victor D. (Inventor); Bejczy, Antal K. (Inventor); Primus, Howard C. (Inventor)

    1989-01-01

    A grasp force sensor for robotic hands is disclosed. A flexible block is located in the base of each claw through which the grasp force is exerted. The block yields minute parallelogram deflection when the claws are subjected to grasping forces. A parallelogram deflection closely resembles pure translational deflection, whereby the claws remain in substantial alignment with each other during grasping. Strain gauge transducers supply signals which provide precise knowledge of and control over grasp forces.

  8. Integrated magnetic and elastic force systems.

    Science.gov (United States)

    Bourauel, Christoph; Köklü, Saduman O; Vardimon, Alexander D

    2002-08-01

    Magnetic force increases as the distance (d) of the force- generating elements (F approximately 1/d(2)) decreases, whereas elastic force decreases as the distance decreases (F approximately kd). These opposing characteristics suggest that combining both force systems will establish an integrated system with a long-range working ability. The objective of this study was to determine the vertical closure force (F(X)) and the transverse axis moment (M(Y)) of an integrated force system, ie, attracting magnets with elastics (vertical or Classes II and III). F(X) and M(Y) were examined on the orthodontic measurement and simulation system. It was found that the integrated force system had a positive closure force (+F(X)) that never declined to 0 and a long working range. Three regions characterized the force-deflection curve of F(X): the magnetic region (0-3 mm, for magnets with 3/16-in medium elastics), in which the decline in magnetic force was larger than the increase in elastic force (6.3-2.5 N); the constant region (3-7 mm), in which the decline in magnetic force equaled the increase in elastic force (2.5-2.9 N); and the elastic region (7-10 mm), in which there was only an increase in elastic force (2.9-3.5 N). The transverse axis moment (+M(Y)), which tends to close the bite, developed especially in magnets with a single vertical elastic. Clinically, inactivation of vertical elastics by closing the mouth can be overruled by the integrated force system because it exerts adequate force level at both short and long distances.

  9. Ehrenfest force in inhomogeneous magnetic field

    International Nuclear Information System (INIS)

    Sisakyan, A.N.; Shevchenko, O.Yu.; Samojlov, V.N.

    2000-01-01

    The Ehrenfest force in an inhomogeneous magnetic field is calculated. It is shown that there exist such (very rare) topologically nontrivial physical situations when the Gauss theorem in its classic formulation fails and, as a consequence, apart from the usual Lorentz force an additional, purely imaginary force acts on the charged particle. This force arises only in inhomogeneous magnetic fields of special configurations, has a purely quantum origin, and disappears in the classical limit

  10. Set Your Creative Forces Free!

    DEFF Research Database (Denmark)

    Meier Sørensen, Bent; Villadsen, Kaspar

    eccentric Managing Director. At first glance the essential message to the employees may be read as ‘set Your creative forces and potentials free!; a statement which activates a semantics of liberation of artistic creativeness and rebellious transgression of conventions. It is suggested, however......, that the manager’s bodily comportment activate and oscillates between a more complex web of managerial rationalities including sovereignty, discipline and pastoral care. It is further suggested that this managerial hybridity renders difficult, or even closes off, conventional forms of contestation and resistance...

  11. Set Your Creative Forces Free!

    DEFF Research Database (Denmark)

    Meier Sørensen, Bent; Villadsen, Kaspar

    eccentric Managing Director. At first glance the essential message to the employees may be read as ‘set Your creative forces and potentials free!; a statement which activates a semantics of liberation of artistic creativeness and rebellious transgression of conventions. It is suggested, however......-hierarchical’ and aestheticized managerial practice reconfigures power relations within a creative industry. The key problematic is ‘governmental’ in the sense suggested by Michel Foucault in as far as the manager’s ethical self-practice—which involves expressive and ‘liberated’ bodily comportment—is used as a means for culture...

  12. Forging Norwegian Special Operation Forces

    Science.gov (United States)

    2014-06-01

    from the perception of public discourse over the past two years. As members of the Norwegian Special Operation Forces, we also have some first- hand ...values to new members and, at the same time and given new contexts, reaffirm those values to old hands .140 This, as Schein points out, is one key to an...delegeres så ansatte kan handle på egen hånd. 12 Involvement Capability Development The "bench strenght " (capability of people) is constantly improving

  13. The forced nonlinear Schroedinger equation

    International Nuclear Information System (INIS)

    Kaup, D.J.; Hansen, P.J.

    1985-01-01

    The nonlinear Schroedinger equation describes the behaviour of a radio frequency wave in the ionosphere near the reflexion point where nonlinear processes are important. A simple model of this phenomenon leads to the forced nonlinear Schroedinger equation in terms of a nonlinear boundary value problem. A WKB analysis of the time evolution equations for the nonlinear Schroedinger equation in the inverse scattering transform formalism gives a crude order of magnitude estimation of the qualitative behaviour of the solutions. This estimation is compared with the numerical solutions. (D.Gy.)

  14. Factors Affecting Aerosol Radiative Forcing

    Science.gov (United States)

    Wang, J.; Lin, J.; Ni, R.

    2016-12-01

    Rapid industrial and economic growth has meant large amount of aerosols in the atmosphere with strong radiative forcing (RF) upon the climate system. Over parts of the globe, the negative forcing of aerosols has overcompensated for the positive forcing of greenhouse gases. Aerosol RF is determined by emissions and various chemical-transport-radiative processes in the atmosphere, a multi-factor problem whose individual contributors have not been well quantified. In this study, we analyze the major factors affecting RF of secondary inorganic aerosols (SIOAs, including sulfate, nitrate and ammonium), primary organic aerosol (POA), and black carbon (BC). We analyze the RFof aerosols produced by 11 major regions across the globe, including but not limited to East Asia, Southeast Asia, South Asia, North America, and Western Europe. Factors analyzed include population size, per capita gross domestic production (GDP), emission intensity (i.e., emissionsper unit GDP), chemical efficiency (i.e., mass per unit emissions) and radiative efficiency (i.e., RF per unit mass). We find that among the 11 regions, East Asia produces the largest emissions and aerosol RF, due to relatively high emission intensity and a tremendous population size.South Asia produce the second largest RF of SIOA and BC and the highest RF of POA, in part due to its highest chemical efficiency among all regions. Although Southeast Asia also has large emissions,its aerosol RF is alleviated by its lowest chemical efficiency.The chemical efficiency and radiative efficiency of BC produced by the Middle East-North Africa are the highest across the regions, whereas its RF is loweredbyasmall per capita GDP.Both North America and Western Europe have low emission intensity, compensating for the effects on RF of large population sizes and per capita GDP. There has been a momentum to transfer industries to Southeast Asia and South Asia, and such transition is expected to continue in the coming years. The resulting

  15. Interfacial forces in aqueous media

    CERN Document Server

    van Oss, Carel J

    2006-01-01

    Thoroughly revised and reorganized, the second edition of Interfacial Forces in Aqueous Media examines the role of polar interfacial and noncovalent interactions among biological and nonbiological macromolecules as well as biopolymers, particles, surfaces, cells, and both polar and apolar polymers. The book encompasses Lifshitz-van der Waals and electrical double layer interactions, as well as Lewis acid-base interactions between colloidal entities in polar liquids such as water. New in this Edition: Four previously unpublished chapters comprising a new section on interfacial propertie

  16. Force feedback and basic laparoscopic skills

    NARCIS (Netherlands)

    Chmarra, M.K.; Dankelman, J.; Van den Dobbelsteen, J.J.; Jansen, F.W.

    2008-01-01

    Background - Not much is known about the exact role offorce feedback in laparoscopy. This study aimed to determine whether force feedback influences movements of instruments during training in laparoscopic tasks and whether force feedback is required for training in basic laparoscopic force

  17. Effective force application in guided leg extensions

    NARCIS (Netherlands)

    Doorenbosch, C.A.M.; Veeger, H. E J; van Zandwijk, J. P.; van Ingen Schenau, G. J.

    1996-01-01

    In guided movements, limb kinematics is determined by the object on which a force is applied (as in cycling). Consequently, the force direction may deviate from the effective direction. It is examined how effective force application is related to maximal power output. A recent study, where subjects

  18. 24 CFR 968.120 - Force account.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Force account. 968.120 Section 968... PUBLIC HOUSING MODERNIZATION General § 968.120 Force account. (a) For both CIAP and CGP, a PHA may undertake the activities using force account labor, only where specifically approved by HUD in the CIAP...

  19. 49 CFR 193.2067 - Wind forces.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Wind forces. 193.2067 Section 193.2067...: FEDERAL SAFETY STANDARDS Siting Requirements § 193.2067 Wind forces. (a) LNG facilities must be designed to withstand without loss of structural or functional integrity: (1) The direct effect of wind forces...

  20. Hydrodynamic forces on inundated bridge decks

    Science.gov (United States)

    2009-05-01

    The hydrodynamic forces experienced by an inundated bridge deck have great importance in the design of bridges. Specifically, the drag force, lift force, and the moment acting on the bridge deck under various levels of inundation and a range of flow ...

  1. Hydraulic forces on submerged bridge decks.

    Science.gov (United States)

    2008-09-01

    Bridge decks can be subjected to large horizontal forces when overtopping occurs. These forces may result in the displacement of bridge decks from the bents. This paper reports on the results of a laboratory study of horizontal forces on bridge decks...

  2. 18 CFR 701.58 - Task forces.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Task forces. 701.58... Headquarters Organization § 701.58 Task forces. The Director with Council concurrence or the Council may establish task forces from time to time to aid in the preparation of issues for presentation to the Council...

  3. 78 FR 30731 - Armed Forces Day, 2013

    Science.gov (United States)

    2013-05-22

    ... Documents#0;#0; ] Proclamation 8984 of May 17, 2013 Armed Forces Day, 2013 By the President of the United..., liberty, and the pursuit of happiness. And on Armed Forces Day, we honor those who serve bravely and... Forces. NOW, THEREFORE, I, BARACK OBAMA, President of the United States of America, and Commander in...

  4. Precipitation response to regional radiative forcing

    Directory of Open Access Journals (Sweden)

    D. T. Shindell

    2012-08-01

    Full Text Available Precipitation shifts can have large impacts on human society and ecosystems. Many aspects of how inhomogeneous radiative forcings influence precipitation remain unclear, however. Here we investigate regional precipitation responses to various forcings imposed in different latitude bands in a climate model. We find that several regions show strong, significant responses to most forcings, but that the magnitude and even the sign depends upon the forcing location and type. Aerosol and ozone forcings typically induce larger responses than equivalent carbon dioxide (CO2 forcing, and the influence of remote forcings often outweighs that of local forcings. Consistent with this, ozone and especially aerosols contribute greatly to precipitation changes over the Sahel and South and East Asia in historical simulations, and inclusion of aerosols greatly increases the agreement with observed trends in these areas, which cannot be attributed to either greenhouse gases or natural forcings. Estimates of precipitation responses derived from multiplying our Regional Precipitation Potentials (RPP; the response per unit forcing relationships by historical forcings typically capture the actual response in full transient climate simulations fairly well, suggesting that these relationships may provide useful metrics. The strong sensitivity to aerosol and ozone forcing suggests that although some air quality improvements may unmask greenhouse gas-induced warming, they have large benefits for reducing regional disruption of the hydrologic cycle.

  5. Propulsive force in front crawl swimming

    NARCIS (Netherlands)

    Berger, M.A.M.; de Groot, G.; Hollander, A.P.

    1999-01-01

    To evaluate the propulsive forces in front crawl arm swimming, derived from a three-dimensional kinematic analysis, these values were compared with mean drag forces. The propulsive forces during front crawl swimming using the arms only were calculated using three-dimensional kinematic analysis

  6. Experimental force modeling for deformation machining stretching ...

    Indian Academy of Sciences (India)

    ARSHPREET SINGH

    magnitude of forces rises significantly. The average resul- tant force rises to 768 N for 1.0 mm incremental step size from 327 N for 0.25 mm step size, keeping other parameters constant. It can be seen that the average resultant force is directly proportional to the incremental step size and fits well with the linear trend (Eq. 5) ...

  7. Interaction Force Estimation During Manipulation of Microparticles

    NARCIS (Netherlands)

    Khalil, I.S.M.; Metz, R.M.P.; Abelmann, Leon; Misra, Sarthak

    2012-01-01

    This work investigates the utilization of microparticles for the wireless sensing of interaction forces in magneticbased manipulation systems. The proposed force estimation approach allows for using microparticles in sensing the interaction forces at hard-to-reach regions to avoid the mechanical and

  8. The Common Forces: Conservative or Nonconservative?

    Science.gov (United States)

    Keeports, David

    2006-01-01

    Of the forces commonly encountered when solving problems in Newtonian mechanics, introductory texts usually limit illustrations of the definitions of conservative and nonconservative forces to gravity, spring forces, kinetic friction and fluid resistance. However, at the expense of very little class time, the question of whether each of the common…

  9. Forces on Architecture Decisions – A Viewpoint

    NARCIS (Netherlands)

    Heesch, Uwe van; Avgeriou, Paris; Hilliard, Rich

    2012-01-01

    In this paper, the notion of forces as influences upon architecture decisions is introduced. To facilitate the documentation of forces as a part of architecture descriptions, we specify a decision forces viewpoint, which extends our existing framework for architecture decisions, following the

  10. A Case for Air Force Reorganization

    Science.gov (United States)

    2013-04-01

    AFRC AETC AFSPC AMC AFSOC ACC AFGSC USAFE PACAF 4 10 19 12 14 18 ## 21 23 24 AU WC WPC SMC22 2 1 9 11 1375 208 17 15 3 Legend: AFMC–Air Force...Strike Command USAFE–US Air Forces in Europe WPC –Warrior Preparation Center PACAF–Pacic Air Forces = Recently Inactivated Figure 1. Organizational

  11. THE CHARACTERIZATION OF GRINDING FORCES

    Directory of Open Access Journals (Sweden)

    E.F. Fielding

    2012-01-01

    Full Text Available Traditionally the grinding process has been a finishing process and the operating parameters and the resuns obtained in this mode are well known. However, wHh the advent of more modern techniques in grinding, there is a need for a greater understanding of the process and in particular a need to be able to predict the forces in grinding. The work reported here is part of an overall programme to study the effects of different dress leads, wheel formulations and metal removal rates on grinding ratios, surlace finish and grinding forces. The work so far has led to the development of empirical relationships based on the various factors in the dressing and grinding operations, these empirical relationships are more easily applied than the relationships developed by other researchers that rely on measurements obtained during testing. The work is now being extended to develop a theoretical derivation on the same principles, the implications of which will be discussed in the paper.

  12. Automobile dependence: The irresistible force

    Energy Technology Data Exchange (ETDEWEB)

    Kenworthy, J.; Newman, P. [Murdoch Univ., WA (Australia). Inst. for Science and Technology Policy

    1993-08-01

    The proposition by Charles Lave that the automobile is `unstoppable`, an irresistible force` and that transit has `lost the battle` in the US and is losing it in Europe, is examined in this paper. It also examines Lave`s proposition that, despite this power of the automobile, car use in the US will probably plateau because of saturation in car ownership, and therefore it may be possible to expand the US highway network without new roads immediately filling up, as they have done until now. The paper presents 1990/91 data on private and public transport for US, Australian, European and Asian cities and updates previously published data. The update to 1990 is attempting to see the extent to which these patterns are continuing or changing in different cities. Overall the paper finds that although automobile dependence is a powerful force, it is not `irresistible` or `unstoppable` and it is certainly not an inevitable outcome of growing wealth. (author). 7 tabs., 17 figs., refs.

  13. Forced Marriage and Birth Outcomes.

    Science.gov (United States)

    Becker, Charles M; Mirkasimov, Bakhrom; Steiner, Susan

    2017-08-01

    We study the impact of marriages resulting from bride kidnapping on infant birth weight. Bride kidnapping-a form of forced marriage-implies that women are abducted by men and have little choice other than to marry their kidnappers. Given this lack of choice over the spouse, we expect adverse consequences for women in such marriages. Remarkable survey data from the Central Asian nation of Kyrgyzstan enable exploration of differential birth outcomes for women in kidnap-based and other types of marriage using both OLS and IV estimation. We find that children born to mothers in kidnap-based marriages have lower birth weight compared with children born to other mothers. The largest difference is between kidnap-based and arranged marriages: the magnitude of the birth weight loss is in the range of 2 % to 6 % of average birth weight. Our finding is one of the first statistically sound estimates of the impact of forced marriage and implies not only adverse consequences for the women involved but potentially also for their children.

  14. Self-Induced Backaction Optical Pulling Force

    Science.gov (United States)

    Zhu, Tongtong; Cao, Yongyin; Wang, Lin; Nie, Zhongquan; Cao, Tun; Sun, Fangkui; Jiang, Zehui; Nieto-Vesperinas, Manuel; Liu, Yongmin; Qiu, Cheng-Wei; Ding, Weiqiang

    2018-03-01

    We achieve long-range and continuous optical pulling in a periodic photonic crystal background, which supports a unique Bloch mode with the self-collimation effect. Most interestingly, the pulling force reported here is mainly contributed by the intensity gradient force originating from the self-induced backaction of the object to the self-collimation mode. This force is sharply distinguished from the widely held conception of optical tractor beams based on the scattering force. Also, this pulling force is insensitive to the angle of incidence and can pull multiple objects simultaneously.

  15. Axial force measurement for esophageal function testing

    DEFF Research Database (Denmark)

    Gravesen, Flemming Holbæk; Funch-Jensen, Peter; Gregersen, Hans

    2009-01-01

    force (force in radial direction) whereas the bolus moves along the length of esophagus in a distal direction. Force measurements in the longitudinal (axial) direction provide a more direct measure of esophageal transport function. The technique used to record axial force has developed from external...... documented using imaging modalities such as radiography and scintigraphy. This inconsistency using manometry has also been documented by axial force recordings. This underlines the lack of information when diagnostics are based on manometry alone. Increasing the volume of a bag mounted on a probe...

  16. Current-induced forces: a simple derivation

    DEFF Research Database (Denmark)

    Todorov, Tchavdar N.; Dundas, Daniel; Lü, Jing-Tao

    2014-01-01

    We revisit the problem of forces on atoms under current in nanoscale conductors. We derive and discuss the five principal kinds of force under steady-state conditions from a simple standpoint that-with the help of background literature-should be accessible to physics undergraduates. The discussion...... aims at combining methodology with an emphasis on the underlying physics through examples. We discuss and compare two forces present only under current-the non-conservative electron wind force and a Lorentz-like velocity-dependent force. It is shown that in metallic nanowires both display significant...

  17. Single-molecule force spectroscopy: optical tweezers, magnetic tweezers and atomic force microscopy

    Science.gov (United States)

    Neuman, Keir C.; Nagy, Attila

    2012-01-01

    Single-molecule force spectroscopy has emerged as a powerful tool to investigate the forces and motions associated with biological molecules and enzymatic activity. The most common force spectroscopy techniques are optical tweezers, magnetic tweezers and atomic force microscopy. These techniques are described and illustrated with examples highlighting current capabilities and limitations. PMID:18511917

  18. Size Dependent Orientation of Knudsen Force

    KAUST Repository

    Zhu, Taishan

    2012-03-03

    Knudsen force acting on a heated microbeam adjacent to a cold substrate in a rarefied gas is a mechanical force created by unbalanced thermal gradients. The measured force has its direction pointing towards the side with a lower thermal gradient and its magnitude vanishes in both continuum and free-molecule limits. In our previous study, negative Knudsen forces were discovered at the high Knudsen regime before diminishing in the free-molecule limit. Such a phenomenon was however not observed in the experiment. In this paper, the existence of such a negative Knudsen force is further confirmed using both numerical simulation and theoretical analysis. The asymptotic order of the Knudsen force near the collisionless limit is analyzed and the analytical expression of its leading term is provided, from which approaches for the enhancement of negative Knudsen forces are proposed. Copyright © 2012 by ASME.

  19. DNA under Force: Mechanics, Electrostatics, and Hydration

    Directory of Open Access Journals (Sweden)

    Jingqiang Li

    2015-02-01

    Full Text Available Quantifying the basic intra- and inter-molecular forces of DNA has helped us to better understand and further predict the behavior of DNA. Single molecule technique elucidates the mechanics of DNA under applied external forces, sometimes under extreme forces. On the other hand, ensemble studies of DNA molecular force allow us to extend our understanding of DNA molecules under other forces such as electrostatic and hydration forces. Using a variety of techniques, we can have a comprehensive understanding of DNA molecular forces, which is crucial in unraveling the complex DNA functions in living cells as well as in designing a system that utilizes the unique properties of DNA in nanotechnology.

  20. Computational force, mass, and energy

    International Nuclear Information System (INIS)

    Numrich, R.W.

    1997-01-01

    This paper describes a correspondence between computational quantities commonly used to report computer performance measurements and mechanical quantities from classical Newtonian mechanics. It defines a set of three fundamental computational quantities that are sufficient to establish a system of computational measurement. From these quantities, it defines derived computational quantities that have analogous physical counterparts. These computational quantities obey three laws of motion in computational space. The solutions to the equations of motion, with appropriate boundary conditions, determine the computational mass of the computer. Computational forces, with magnitudes specific to each instruction and to each computer, overcome the inertia represented by this mass. The paper suggests normalizing the computational mass scale by picking the mass of a register on the CRAY-1 as the standard unit of mass

  1. Forced air heat sink apparatus

    Science.gov (United States)

    Rippel, Wally E. (Inventor)

    1989-01-01

    A high efficiency forced air heat sink assembly employs a split feed transverse flow configuration to minimize the length of the air flow path through at least two separated fin structures. Different embodiments use different fin structure material configurations including honeycomb, corrugated and serpentine. Each such embodiment uses a thermally conductive plate having opposed exterior surfaces; one for receiving a component to be cooled and one for receiving the fin structures. The serpentine structured fin embodiment employs a plurality of fin supports extending from the plate and forming a plurality of channels for receiving the fin structures. A high thermal conductivity bondant, such as metal-filled epoxy, may be used to bond the fin structures to either the plate or the fin supports. Dip brazing and soldering may also be employed depending upon the materials selected.

  2. Technology as a driving force

    Energy Technology Data Exchange (ETDEWEB)

    Torvund, T. [Norsk Hydro A/S (Norway)

    1994-12-31

    The competitiveness of the Norwegian Continental shelf has been put firmly on the agenda in Norway since the report from a working group set up by the Ministry of Industry and Energy was released in February this year. If there is to be secured a long future for oil and gas activities, a reduction in the time and costs used in the projects of the order of 40-50%, without jeopardizing the high safety and environmental standards achieved in Norway. The paper addresses how technology can be a driving force in achieving these aims. But technology alone cannot do the job. Progress and changes in several other areas are also necessary, and the new scenario also calls for improved relations between all actors in the North Sea, authorities, oil companies, contractors and labour unions. 15 figs.

  3. Atomic Force Microscopy in Liquids

    Science.gov (United States)

    Weisenhorn, Albrecht Ludwig

    The atomic force microscope (AFM) was invented by Binnig, Quate, and Gerber in 1986 as an offspring of the very successful scanning tunneling microscope (STM), which Binnig and Rohrer invented in 1982 and for which they shared the Nobel prize. While the STM can only image conducting surfaces, the AFM has overcome this limitation. An AFM creates a three-dimensional image of the sample surface by raster scanning this surface under a sharp tip that is attached to a cantilever. The tip moves the cantilever up and down while going over "hills" and through "valleys" of the surface. The vertical motion of the cantilever deflects a laser beam that is reflected off the back of the cantilever toward a two-segment photodiode. The difference of the intensity of the two segments is used as the deflection signal. A feedback loop is used to keep the deflection signal constant by moving the sample surface up and down accordingly. This vertical motion gives a direct measurement of the surface height. The forces involved in the imaging process have been studied in air and water. Due to adsorbed layers on tip and sample surface when scanning in air (capillary condensation) the imaging forces are >10 ^{-7} N. If the tip and sample surface are immersed in water the forces can be reduced to {~}10^{ -9} N. An AFM with a large scanner can image up to tens of micrometers like an optical microscope. Zooming in allows one to get resolution of a few nanometers, which makes the AFM a natural continuation of the optical microscope towards higher magnification. Integrated circuit chips, photographic film, bacteria, red and white blood cells, purple membrane, polymerized Langmuir-Blodgett (LB) films, and stoma have been imaged at low and high magnification. The AFM has shown its power by imaging "hard" and "soft" surfaces with atomic and (sub)molecular resolution respectively. The "hard" crystalline surfaces of mica, graphite, RuCl_3, Ge(111), Bi(111), and zeolites (clinoptilolite (010

  4. Technology as a driving force

    International Nuclear Information System (INIS)

    Torvund, T.

    1994-01-01

    The competitiveness of the Norwegian Continental shelf has been put firmly on the agenda in Norway since the report from a working group set up by the Ministry of Industry and Energy was released in February this year. If there is to be secured a long future for oil and gas activities, a reduction in the time and costs used in the projects of the order of 40-50%, without jeopardizing the high safety and environmental standards achieved in Norway. The paper addresses how technology can be a driving force in achieving these aims. But technology alone cannot do the job. Progress and changes in several other areas are also necessary, and the new scenario also calls for improved relations between all actors in the North Sea, authorities, oil companies, contractors and labour unions. 15 figs

  5. Forced normalisation precipitated by lamotrigine.

    Science.gov (United States)

    Clemens, Béla

    2005-10-01

    To report two patients with lamotrigine-induced forced normalization (FN). Evaluation of the patient files, EEG, and video-EEG records, with special reference to the parallel clinical and EEG changes before, during, and after FN. This is the first documented report of lamotrigine-induced FN. The two epileptic patients (one of them was a 10-year-old girl) were successfully treated with lamotrigine. Their seizures ceased and interictal epileptiform events disappeared from the EEG record. Simultaneously, the patients displayed de novo occurrence of psychopathologic manifestations and disturbed behaviour. Reduction of the daily dose of LTG led to disappearance of the psychopathological symptoms and reappearance of the spikes but not the seizures. Lamotrigine may precipitate FN in adults and children. Analysis of the cases showed that lamotrigine-induced FN is a dose-dependent phenomenon and can be treated by reduction of the daily dose of the drug.

  6. Forced marriage, forced sex: the perils of childhood for girls.

    Science.gov (United States)

    Ouattara, M; Sen, P; Thomson, M

    1998-11-01

    A recently formed interagency Forum on the Rights of Girls and Women in Marriage is investigating the widespread problem of nonconsensual marriage and forced sex and advocating for legislative and policy initiatives. This article reviews three research projects in this area: research by Anti-Slavery International on child marriage in parts of West Africa, an investigation by Save the Children of children's views of early marriage, and research conducted by CHANGE on women's resistance to domestic violence in Calcutta, India. Girls who marry before 15 years of age are more likely to be illiterate than their older counterparts, more likely to be dowry payment brides, less likely to come into contact with development projects, have higher rates of infant mortality, and are most vulnerable to sexual violence. In many cases, intercourse is initiated before the girl begins to menstruate. Although adult women also face sexual violence within marriage, this problem is all the more traumatic for girls who lack any information about sexuality. Sex with girls below a certain age is usually covered by rape legislation, but, in countries such as India, this is mitigated by the religiously defined personal laws. The absence of adequate legal and policy action frameworks to deal with the rights of girls, coupled with the lack of sanctions against these abuses, comprise state complicity and neglect of duty under international law to this vulnerable group.

  7. Uncertainties in forces extracted from non-contact atomic force microscopy measurements by fitting of long-range background forces

    Directory of Open Access Journals (Sweden)

    Adam Sweetman

    2014-04-01

    Full Text Available In principle, non-contact atomic force microscopy (NC-AFM now readily allows for the measurement of forces with sub-nanonewton precision on the atomic scale. In practice, however, the extraction of the often desired ‘short-range’ force from the experimental observable (frequency shift is often far from trivial. In most cases there is a significant contribution to the total tip–sample force due to non-site-specific van der Waals and electrostatic forces. Typically, the contribution from these forces must be removed before the results of the experiment can be successfully interpreted, often by comparison to density functional theory calculations. In this paper we compare the ‘on-minus-off’ method for extracting site-specific forces to a commonly used extrapolation method modelling the long-range forces using a simple power law. By examining the behaviour of the fitting method in the case of two radically different interaction potentials we show that significant uncertainties in the final extracted forces may result from use of the extrapolation method.

  8. DelPhiForce web server: electrostatic forces and energy calculations and visualization.

    Science.gov (United States)

    Li, Lin; Jia, Zhe; Peng, Yunhui; Chakravorty, Arghya; Sun, Lexuan; Alexov, Emil

    2017-11-15

    Electrostatic force is an essential component of the total force acting between atoms and macromolecules. Therefore, accurate calculations of electrostatic forces are crucial for revealing the mechanisms of many biological processes. We developed a DelPhiForce web server to calculate and visualize the electrostatic forces at molecular level. DelPhiForce web server enables modeling of electrostatic forces on individual atoms, residues, domains and molecules, and generates an output that can be visualized by VMD software. Here we demonstrate the usage of the server for various biological problems including protein-cofactor, domain-domain, protein-protein, protein-DNA and protein-RNA interactions. The DelPhiForce web server is available at: http://compbio.clemson.edu/delphi-force. delphi@clemson.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

  9. From Territorial Defence to Expeditionary Forces

    DEFF Research Database (Denmark)

    Nyemann, Dorthe; Staun, Jørgen Meedom

    2016-01-01

    After the Cold War the Danish Armed Forces moved away from its traditional role of territorial defense of Danish soil and towards a role as a globally deployable expeditionary force, imbedded with UK and/or US forces. This shift in national strategy amplified the requirements of the young officer......’ ability to think and act strategically in international missions. This article discusses to what extent this has been reflected in the education of the young officers.......After the Cold War the Danish Armed Forces moved away from its traditional role of territorial defense of Danish soil and towards a role as a globally deployable expeditionary force, imbedded with UK and/or US forces. This shift in national strategy amplified the requirements of the young officers...

  10. Electromagnetic force support for thermonuclear device

    International Nuclear Information System (INIS)

    Sugimoto, Makoto; Yoshida, Kiyoshi; Tachikawa, Nobuo; Omori, Junji.

    1992-01-01

    The device of the present invention certainly supports electromagnetic force exerted on toroidal magnetic field coils. That is, a pair of support members are disposed being abutted against each other between toroidal magnetic field coils disposed radially in the torus direction of a vacuum vessel. Both of the support members are connected under an insulative state by way of an insulative structural portion having an insulation key. In addition, each of the support members and each of the toroidal magnetic field coils are connected by electromagnetic force support portions having a metal taper key and a metal spacer and supporting the electromagnetic force. With such a constitution, the electromagnetic force exerted on the toroidal magnetic field coils is supported by the electromagnetic force support portion having the metal taper key and the metal spacer. As a result, stable electromagnetic force support can be attained. Further, since the insulative structural portion has the insulation key, it can be assembled easily. (I.S.)

  11. Retinal Changes Induced by Epiretinal Tangential Forces

    Directory of Open Access Journals (Sweden)

    Mario R. Romano

    2015-01-01

    Full Text Available Two kinds of forces are active in vitreoretinal traction diseases: tangential and anterior-posterior forces. However, tangential forces are less characterized and classified in literature compared to the anterior-posterior ones. Tangential epiretinal forces are mainly due to anomalous posterior vitreous detachment (PVD, vitreoschisis, vitreopapillary adhesion (VPA, and epiretinal membranes (ERMs. Anomalous PVD plays a key role in the formation of the tangential vectorial forces on the retinal surface as consequence of gel liquefaction (synchysis without sufficient and fast vitreous dehiscence at the vitreoretinal interface. The anomalous and persistent adherence of the posterior hyaloid to the retina can lead to vitreomacular/vitreopapillary adhesion or to a formation of avascular fibrocellular tissue (ERM resulting from the proliferation and transdifferentiation of hyalocytes resident in the cortical vitreous remnants after vitreoschisis. The right interpretation of the forces involved in the epiretinal tangential tractions helps in a better definition of diagnosis, progression, prognosis, and surgical outcomes of vitreomacular interfaces.

  12. Attentional Focusing Instructions and Force Production

    Directory of Open Access Journals (Sweden)

    David C Marchant

    2011-01-01

    Full Text Available Research progress assessing the role of attentional focusing instructions on skill acquisition and performance has lead researchers to apply this approach to force production tasks. Initial converging evidence indicates that force production tasks are sensitive to verbal instruction; externally focused instructions (onto movement outcomes, or onto the object force is being exerted against are shown to be more beneficial than internally focused instructions (focusing attention onto the movements being executed. These benefits are observed for maximal and accurate force production, as well as the maintenance of force production in prolonged tasks. A range of mechanisms are identified supporting the proposal that an external focus promotes movement efficiency in line with energy and effort conservation. Future research is required to assess how this developing body of work interacts with the broader understanding of psychological and physiological factors implicated in the effective production, maintenance and limitation of maximal or sub-maximal forces.

  13. Royal Danish Air Force. Air Operations Doctrine

    DEFF Research Database (Denmark)

    Nørby, Søren

    This brief examines the development of the first Danish Air Force Air Operations Doctrine, which was officially commissioned in October 1997 and remained in effect until 2010. The development of a Danish air power doctrine was heavily influenced by the work of Colonel John Warden (USAF), both...... through his book ”The Air Campaign” and his subsequent planning of the air campaign against Iraq in 1990-1991. Warden’s ideas came to Denmark and the Danish Air Force by way of Danish Air Force students attending the United States Air Force Air University in Alabama, USA. Back in Denmark, graduates from...... the Air University inspired a small number of passionate airmen, who then wrote the Danish Air Operations Doctrine. The process was supported by the Air Force Tactical Command, which found that the work dovetailed perfectly with the transformation process that the Danish Air Force was in the midst...

  14. Clamp force and alignment checking device

    Science.gov (United States)

    Spicer, John Patrick; Cai, Wayne W.; Chakraborty, Debejyo; Mink, Keith

    2017-04-11

    A check fixture measures a total clamp force applied by a welder device. The welder device includes a welding horn having a plurality of weld pads and welding anvil having a plurality of weld pads. The check fixture includes a base member operatively supporting a plurality of force sensors. The base member and the force sensors are received between the weld pads of the welding horn and the anvil pads of the welding anvil. Each force sensor is configured to measure an individual clamp force applied thereto by corresponding weld and anvil pads when the base member is received between the welding horn and the welding anvil and the welder device is in the clamped position. The individual clamp forces are used to determine whether the weld and/or anvil pads are worn or misaligned.

  15. Mechanically-forced dynamos (Invited)

    Science.gov (United States)

    Le Bars, M.

    2013-12-01

    It is a commonly accepted hypothesis that convection is responsible for planetary dynamos. However, the validity of the convective dynamo model can be questioned in various planets and moons as well as in asteroids, where the constraints from thermal evolution and compositional core models are sometimes difficult to reconcile with available data from paleomagnetism and in situ measurements. Over the last few years, researches have thus been pursued to find alternative mechanisms for sustaining intense three-dimensional motions in liquid cores, a necessary ingredient for planetary dynamo. In particular, mechanical forcings driven by libration, precession, nutation and tides, have received a renewed interest, following the first studies by Malkus in the 60's. A huge reservoir of energy is available in the rotational and orbital motions of all planetary systems. If planetary bodies were completely rigid and rotating at a constant spin rate, their fluid layers in the absence of convection would also behave rigidly and follow the spin of their boundaries. But small periodic perturbations of the shape of the core/mantle boundary (i.e. dynamic tides) and/or small periodic perturbations of the direction of the spin vector (i.e. precession and nutation) and/or small periodic perturbations of the spin rate (i.e. libration) systematically perturb this rigid state. Then, each of these small perturbations is capable of triggering instabilities in fluid layers, conveying energy from the spin and orbital motions to drive intense three-dimensional flows in the liquid cores. With the view to establish a general framework for planetary applications, I will present here the basic physical ingredients of these instabilities, which involve a resonance between the considered mechanical forcing and two inertial waves of the core. I will then review the numerical and experimental validations of this generic principle, and the few magnetohydrodynamic validations of their dynamo capacity

  16. Atomic Force Microscope Mediated Chromatography

    Science.gov (United States)

    Anderson, Mark S.

    2013-01-01

    The atomic force microscope (AFM) is used to inject a sample, provide shear-driven liquid flow over a functionalized substrate, and detect separated components. This is demonstrated using lipophilic dyes and normal phase chromatography. A significant reduction in both size and separation time scales is achieved with a 25-micron-length column scale, and one-second separation times. The approach has general applications to trace chemical and microfluidic analysis. The AFM is now a common tool for ultra-microscopy and nanotechnology. It has also been demonstrated to provide a number of microfluidic functions necessary for miniaturized chromatography. These include injection of sub-femtoliter samples, fluidic switching, and sheardriven pumping. The AFM probe tip can be used to selectively remove surface layers for subsequent microchemical analysis using infrared and tip-enhanced Raman spectroscopy. With its ability to image individual atoms, the AFM is a remarkably sensitive detector that can be used to detect separated components. These diverse functional components of microfluidic manipulation have been combined in this work to demonstrate AFM mediated chromatography. AFM mediated chromatography uses channel-less, shear-driven pumping. This is demonstrated with a thin, aluminum oxide substrate and a non-polar solvent system to separate a mixture of lipophilic dyes. In conventional chromatographic terms, this is analogous to thin-layer chromatography using normal phase alumina substrate with sheardriven pumping provided by the AFM tip-cantilever mechanism. The AFM detection of separated components is accomplished by exploiting the variation in the localized friction of the separated components. The AFM tip-cantilever provides the mechanism for producing shear-induced flows and rapid pumping. Shear-driven chromatography (SDC) is a relatively new concept that overcomes the speed and miniaturization limitations of conventional liquid chromatography. SDC is based on a

  17. Controlling photonic structures using optical forces

    OpenAIRE

    Wiederhecker, Gustavo S.; Chen, Long; Gondarenko, Alexander; Lipson, Michal

    2009-01-01

    The downscaling of optical systems to the micro and nano-scale results in very compliant systems with nanogram-scale masses, which renders them susceptible to optical forces. Here we show a specially designed resonant structure for enabling efficient static control of the optical response with relatively weak repulsive and attractive optical forces. Using attractive gradient optical forces we demonstrate a static mechanical deformation of up to 20 nanometers in the resonator structure. This d...

  18. Force focusing in confined fibres and sheets

    Energy Technology Data Exchange (ETDEWEB)

    Romero, Victor; Cerda, Enrique [Departamento de Fisica, Universidad de Santiago, Av. Ecuador 3493, Santiago (Chile); Witten, T A; Liang Tao [James Franck Institute, University of Chicago, Chicago IL 60637 (United States)], E-mail: t-witten@uchicago.edu

    2008-07-07

    A thin fibre or sheet curled into a circular container has a detached region whose shape and force ratios are independent of material properties and container radius. We compute this shape and compare it with experiments. The discrete forces acting at either end of the detached region have a ratio that depends only on the length of the fibre or sheet relative to the circle radius. We calculate this force ratio in three regimes of circle radius. (fast track communication)

  19. Retaining force augmentation of retaining walls

    OpenAIRE

    Manohar, Krishpersad; Tota-Maharaj, Kiran; Panchoo, Roshan

    2017-01-01

    Concrete blocks retaining walls are commonly used for landscaping projects in which the retaining force strength of the structure is of paramount importance in preserving the integrity of the project and safety of humans and property. The effect of augmenting the retaining force strength of concrete block retaining walls was investigated using interlocking and interlocking with a horizontal steel re-bar and compared with regular concrete block walls. The average maximum retaining force for re...

  20. Detection of climate forcing using emission spectra

    Science.gov (United States)

    Goody, Richard; Haskins, Robert; Abdou, Wedad; Chen, Luke

    1995-01-01

    We discuss the use of thermal emission spectra recorded by satellites to construct climate indices that can detect the evolution of a specific climate forcing in a time series. The two important issues are selectivity against climate forcings other than one that is sought, and sensitivity to the required forcing. We show that indices with selectivity can be found, and that their sensitivity can be high.

  1. Static magnetic forces and torques in ATLAS

    International Nuclear Information System (INIS)

    Morozov, N.A.; Samsonov, E.V.; Vorozhtsov, S.B.

    1998-01-01

    The magnetic forces acting on the various metallic objects around the ATLAS detector, are the subject of the given paper. A system designer could use the information on global forces and torque acting on various components, obtained in this report, to optimize them. The results of force calculations could also serve as additional criteria for the replacement of the magnetic baseline material of various structures by nonmagnetic ones

  2. The five competitive forces that shape strategy.

    Science.gov (United States)

    Porter, Michael E

    2008-01-01

    In 1979, a young associate professor at Harvard Business School published his first article for HBR, "How Competitive Forces Shape Strategy." In the years that followed, Michael Porter's explication of the five forces that determine the long-run profitability of any industry has shaped a generation of academic research and business practice. In this article, Porter undertakes a thorough reaffirmation and extension of his classic work of strategy formulation, which includes substantial new sections showing how to put the five forces analysis into practice. The five forces govern the profit structure of an industry by determining how the economic value it creates is apportioned. That value may be drained away through the rivalry among existing competitors, of course, but it can also be bargained away through the power of suppliers or the power of customers or be constrained by the threat of new entrants or the threat of substitutes. Strategy can be viewed as building defenses against the competitive forces or as finding a position in an industry where the forces are weaker. Changes in the strength of the forces signal changes in the competitive landscape critical to ongoing strategy formulation. In exploring the implications of the five forces framework, Porter explains why a fast-growing industry is not always a profitable one, how eliminating today's competitors through mergers and acquisitions can reduce an industry's profit potential, how government policies play a role by changing the relative strength of the forces, and how to use the forces to understand complements. He then shows how a company can influence the key forces in its industry to create a more favorable structure for itself or to expand the pie altogether. The five forces reveal why industry profitability is what it is. Only by understanding them can a company incorporate industry conditions into strategy.

  3. Status of Forces and Criminal Jurisdiction

    OpenAIRE

    Voetelink, J.

    2013-01-01

    This article examines the legal status of armed forces present in friendly foreign territory with a special focus on criminal jurisdiction. Traditionally, this issue has been considered from the perspective of public international law in which immunities play an important role. However, this perspective does not fully cover the criminal jurisdiction provisions in the international agreements dealing with the status of visiting forces (Status of Forces Agreements). This article introduces mili...

  4. The force pyramid: a spatial analysis of force application during virtual reality brain tumor resection.

    Science.gov (United States)

    Azarnoush, Hamed; Siar, Samaneh; Sawaya, Robin; Zhrani, Gmaan Al; Winkler-Schwartz, Alexander; Alotaibi, Fahad Eid; Bugdadi, Abdulgadir; Bajunaid, Khalid; Marwa, Ibrahim; Sabbagh, Abdulrahman Jafar; Del Maestro, Rolando F

    2017-07-01

    OBJECTIVE Virtual reality simulators allow development of novel methods to analyze neurosurgical performance. The concept of a force pyramid is introduced as a Tier 3 metric with the ability to provide visual and spatial analysis of 3D force application by any instrument used during simulated tumor resection. This study was designed to answer 3 questions: 1) Do study groups have distinct force pyramids? 2) Do handedness and ergonomics influence force pyramid structure? 3) Are force pyramids dependent on the visual and haptic characteristics of simulated tumors? METHODS Using a virtual reality simulator, NeuroVR (formerly NeuroTouch), ultrasonic aspirator force application was continually assessed during resection of simulated brain tumors by neurosurgeons, residents, and medical students. The participants performed simulated resections of 18 simulated brain tumors with different visual and haptic characteristics. The raw data, namely, coordinates of the instrument tip as well as contact force values, were collected by the simulator. To provide a visual and qualitative spatial analysis of forces, the authors created a graph, called a force pyramid, representing force sum along the z-coordinate for different xy coordinates of the tool tip. RESULTS Sixteen neurosurgeons, 15 residents, and 84 medical students participated in the study. Neurosurgeon, resident and medical student groups displayed easily distinguishable 3D "force pyramid fingerprints." Neurosurgeons had the lowest force pyramids, indicating application of the lowest forces, followed by resident and medical student groups. Handedness, ergonomics, and visual and haptic tumor characteristics resulted in distinct well-defined 3D force pyramid patterns. CONCLUSIONS Force pyramid fingerprints provide 3D spatial assessment displays of instrument force application during simulated tumor resection. Neurosurgeon force utilization and ergonomic data form a basis for understanding and modulating resident force

  5. Learning to produce predicted static handgrip forces.

    Science.gov (United States)

    Angyán, L; Téczely, T; Karsai, I

    2005-01-01

    The objective of this study was to prove the hypothesis that kinaesthetic sensations, without visual or verbal guidance, give sufficient information to produce predictive handgrip forces. The ability of 70 girls and 70 boys aged 11 to 17 years to produce predicted static handgrip force was examined. The subjects were requested to produce 50% of their individual maximum handgrip force and maintain it for 2 seconds without visual control. Ten trials were done first by the right-hand and then by the left-hand. The maximum grip strength increased parallel with age, but significant differences were found between both the right and the left-hand, and the genders. Close correlations were found between the desired and the exerted forces. The differences between the desired forces and the exerted forces produced by the fifth trials were significantly smaller than that of the first trials. The verbal information about each exerted force contributed to the learning with right-hand since it caused a further decrease in the difference between the desired force and the exerted force. In contrast, the learning with left-hand was not enhanced by verbal feedback. These results suggest that kinaesthetic feedback information from the hand plays an effective role in learning to produce predicted grip strengths without visual and verbal information.

  6. Force Dynamics During T Cell Activation

    Science.gov (United States)

    Garcia, David A.; Upadhyaya, Arpita

    T cell activation is an essential step in the adaptive immune response. The binding of the T cell receptor (TCR) with antigen triggers signaling cascades and cell spreading. Physical forces exerted on the TCR by the cytoskeleton have been shown to induce signaling events. While cellular forces are known to depend on the mechanical properties of the cytoskeleton, the biophysical mechanisms underlying force induced activation of TCR-antigen interactions unknown. Here, we use traction force microscopy to measure the force dynamics of activated Jurkat T cells. The movements of beads embedded in an elastic gel serve as a non-invasive reporter of cytoskeletal and molecular motor dynamics. We examined the statistical structure of the force profiles throughout the cell during signaling activation. We found two spatially distinct active regimes of force generation characterized by different time scales. Typically, the interior of the cells was found to be more active than the periphery. Inhibition of myosin motor activity altered the correlation time of the bead displacements indicating additional sources of stochastic force generation. Our results indicate a complex interaction between myosin activity and actin polymerization dynamics in producing cellular forces in immune cells.

  7. Force Factor Modulation in Electro Dynamic Loudspeakers

    DEFF Research Database (Denmark)

    Risbo, Lars; Agerkvist, Finn T.; Tinggaard, Carsten

    2016-01-01

    that includes the frequency dependency and applies to coils with non-inductive (lossy) blocked impedance. The paper also demonstrates that Cunningham’s force can be explained physically as a modulation of the force factor which again is directly linked to modulation of the flux of the coil. A verification based...... on both experiments and simulations is presented along discussions of the impact of force factor modulation for various motor topologies. Finally, it is shown that the popular L2R2 coil impedance model does not correctly predict the force unless the new analysis is applied....

  8. Force generation by orthodontic coil springs.

    Science.gov (United States)

    von Fraunhofer, J A; Bonds, P W; Johnson, B E

    1993-01-01

    Nickel titanium (NiTi) coil springs are a new development in orthodontics, designed to produce light continuous forces. This study compares the force delivery by NiTi open and closed coil springs during unloading (de-activation) to that provided by comparable stainless steel (SS) springs. Open-coil springs (0.010 x 0.035 inch) were compressed from their initial length of 15 mm to 6 mm and the forces generated with spring recovery recorded. Closed-coil springs (0.009 x 0.035 inch) were distracted from their initial length of 3 mm to 9 mm and the force recorded as the spring recovered. The closed-coil NiTi springs produced light continuous forces of 75-90 g over the distraction range of 6 mm while the open-coil springs produced forces of 55-70 g within the 9 mm compression range. SS springs produced heavier forces, ca. 200 g, for an activation of 1 mm and the generated force increased rapidly as the activation was increased. The findings indicate that NiTi coil springs deliver optimal forces for orthodontic tooth movement over a longer activation range than comparable SS springs.

  9. Recruitment to the All Volunteer Force

    National Research Council Canada - National Science Library

    Harries-Jenkins, Gwyn

    2001-01-01

    Western military establishments which have decided to shift from conscription (the draft) to volunteerism as the basis of recruitment to their armed forces, commonly face very considerable challenges...

  10. Nanoparticle movement: Plasmonic forces and physical constraints

    International Nuclear Information System (INIS)

    Batson, P.E.; Reyes-Coronado, A.; Barrera, R.G.; Rivacoba, A.; Echenique, P.M.; Aizpurua, J.

    2012-01-01

    Nanoparticle structures observed in aberration-corrected electron microscopes exhibit many types of behavior, some of which are dominated by intrinsic conditions, unrelated to the microscope environment. Some behaviors are clearly driven by the electron beam, however, and the question arises as to whether these are similar to intrinsic mechanisms, useful for understanding nanoscale behavior, or whether they should be regarded as unwanted modification of as-built specimens. We have studied a particular kind of beam–specimen interaction – plasmon dielectric forces caused by the electric fields imposed by a passing swift electron – identifying four types of forced motion, including both attractive and repulsive forces on single nanoparticles, and coalescent and non-coalescent forces in groups of two or more nanoparticles. We suggest that these forces might be useful for deliberate electron beam guided movement of nanoparticles. -- Highlights: ► We investigate the interaction of metal nanoparticles with a high energy electron beam. ► We find forces ranging from 0.1 to 50 pN forces between the metal particles and the beam. ► At moderate distances, dielectric forces are usually small and attractive. ► At sub-Nm distances the forces become repulsive, pushing nanoparticles away from the electron beam. ► While the repulsive behavior is predicted by electromagnetic theory, the detailed origin of the behavior is not yet understood.

  11. U.S. Preventive Services Task Force

    Science.gov (United States)

    ... for Guideline Development About the USPSTF Our Members Conflict of Interest Disclosures Task Force Resources Our ... Announcements Final Research Plan: Screening for Hepatitis B Virus Infection in ...

  12. Integrating Contractors into the Logistics Force

    National Research Council Canada - National Science Library

    Terrell, Ronald G

    2006-01-01

    ... a panacea. For a combatant commander to effectively integrate them with his military force requires an understanding of the operational environment, contractor capabilities, acceptable levels of risk...

  13. Handbook of force transducers. Principles and components

    Energy Technology Data Exchange (ETDEWEB)

    Stefanescu, Dan Mihai [Romanian Measurement Society, Bucharest (Romania)

    2011-07-01

    Part I introduces the basic ''Principles and Methods of Force Measurement'' according to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the ''(Strain Gauge) Force Transducers Components'', evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the ''heart'' of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum location of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field. (orig.)

  14. Air Force's Transformation to an Expeditionary Culture

    National Research Council Canada - National Science Library

    Anderson, Richard D

    2007-01-01

    .... In response, leadership developed the Air Expeditionary Force (AEF) whereby units and personnel could schedule training, education, and family events such as holidays, vacations, graduations and weddings...

  15. Simulation of Bichromatic Force Cooling

    Science.gov (United States)

    Hua, Xiang; Corder, Christopher; Metcalf, Harold

    2016-05-01

    Laser cooling without spontaneous emission as implemented by the bichromatic force (BF) remains a controversial topic. We have done a numerical simulation of the BF on He using the 23 S 33 P transition at λ = 389 nm in order to support the interpretation of previously reported measurements. Our experiments and the simulation reported here use a time scale comparable to the excited state lifetime so that spontaneous emission cannot contribute significantly. The average velocity change is 30 - 40 times larger than the recoil velocity but the measurements of both phase space and velocity space compression are limited by the longitudinal velocity spread of the atomic beam to ~ 2. The simulation clearly shows this spreading. The code passed several preliminary tests using single-frequency traveling and standing waves, and then it was run with the appropriate bichromatic light fields. Its output agrees very well with the measurements and, most importantly, shows that significant laser cooling is indeed possible on a time scale comparable to that of a single absorption-spontaneous cycle. Supported by ONR.

  16. [Addictions: Motivated or forced care].

    Science.gov (United States)

    Cottencin, Olivier; Bence, Camille

    2016-12-01

    Patients presenting with addictions are often obliged to consult. This constraint can be explicit (partner, children, parents, doctor, police, justice) or can be implicit (for their children, for their families, or for their health). Thus, beyond the fact that the caregiver faces the paradox of caring for subjects who do not ask treatment, he faces as well a double bind considered to be supporter of the social order or helper of patients. The transtheoretical model of change is complex showing us that it was neither fixed in time, nor perpetual for a given individual. This model includes ambivalence, resistance and even relapse, but it still considers constraint as a brake than an effective tool. Therapist must have adequate communication tools to enable everyone (forced or not) understand that involvement in care will enable him/her to regain his free will, even though it took to go through coercion. We propose in this article to detail the first steps with the patient presenting with addiction looking for constraint (implicit or explicit), how to work with constraint, avoid making resistances ourselves and make of constraint a powerful motivator for change. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  17. Cloud forcing: A modeling perspective

    International Nuclear Information System (INIS)

    Potter, G.L.; Mobely, R.L.; Drach, R.S.; Corsetti, T.G.; Williams, D.N.; Slingo, J.M.

    1990-11-01

    Radiation fields from a perpetual July integration of a T106 version of the ECMWF operational model are used as surrogate observations of the radiation budget at the top of the atmosphere to illustrate various difficulties that modellers might face when trying to reconcile cloud radiation forcings derived from satellite observations with model-generated ones. Differences between the so-called Methods 1 and 2 of Cess and Potter (1987) and a variant Method 3 are addressed. Method 1 is shown to be the least robust of all methods, due to potential uncertainties related to persistent cloudiness, length of the period over which clear-sky conditions are looked for, biases in retrieved clear-sky quantities due to an insufficient sampling of the diurnal cycle. We advocate the use of Method 2 as the only unambiguous one to produce consistent radiative diagnostics for intercomparing model results. Impact of the three methods on the derived sensitivities and cloud feedbacks following an imposed change in sea surface temperature (used as a surrogate climate change) is discussed. 17 refs., 12 figs., 1 tab

  18. Theoretical Models for Surface Forces and Adhesion and Their Measurement Using Atomic Force Microscopy

    Science.gov (United States)

    Leite, Fabio L.; Bueno, Carolina C.; Da Róz, Alessandra L.; Ziemath, Ervino C.; Oliveira, Osvaldo N.

    2012-01-01

    The increasing importance of studies on soft matter and their impact on new technologies, including those associated with nanotechnology, has brought intermolecular and surface forces to the forefront of physics and materials science, for these are the prevailing forces in micro and nanosystems. With experimental methods such as the atomic force spectroscopy (AFS), it is now possible to measure these forces accurately, in addition to providing information on local material properties such as elasticity, hardness and adhesion. This review provides the theoretical and experimental background of AFS, adhesion forces, intermolecular interactions and surface forces in air, vacuum and in solution. PMID:23202925

  19. Theoretical models for surface forces and adhesion and their measurement using atomic force microscopy.

    Science.gov (United States)

    Leite, Fabio L; Bueno, Carolina C; Da Róz, Alessandra L; Ziemath, Ervino C; Oliveira, Osvaldo N

    2012-10-08

    The increasing importance of studies on soft matter and their impact on new technologies, including those associated with nanotechnology, has brought intermolecular and surface forces to the forefront of physics and materials science, for these are the prevailing forces in micro and nanosystems. With experimental methods such as the atomic force spectroscopy (AFS), it is now possible to measure these forces accurately, in addition to providing information on local material properties such as elasticity, hardness and adhesion. This review provides the theoretical and experimental background of afs, adhesion forces, intermolecular interactions and surface forces in air, vacuum and in solution.

  20. Effect of dielectrophoretic force on swimming bacteria.

    Science.gov (United States)

    Tran, Ngoc Phu; Marcos

    2015-07-01

    Dielectrophoresis (DEP) has been applied widely in bacterial manipulation such as separating, concentrating, and focusing. Previous studies primarily focused on the collective effects of DEP force on the bacterial population. However, the influence of DEP force on the swimming of a single bacterium had not been investigated. In this study, we present a model to analyze the effect of DEP force on a swimming helically flagellated bacterium, particularly on its swimming direction and velocity. We consider a simple DEP force that acts along the X-direction, and its strength as well as direction varies with the X- and Y-positions. Resistive force theory is employed to compute the hydrodynamic force on the bacterium's flagellar bundle, and the effects of both DEP force and rotational diffusion on the swimming of the bacterium are simultaneously taken into consideration using the Fokker-Planck equation. We show the mechanism of how DEP force alters the orientation and velocity of the bacterium. In most cases, the DEP force dominantly influences the orientation of the swimming bacterium; however, when the DEP force strongly varies along the Y-direction, the rotational diffusion is also responsible for determining the bacterium's reorientation. More interestingly, the variance of DEP force along the Y-direction causes the bacterium to experience a translational velocity perpendicular to its primary axis, and this phenomenon could be utilized to focus the bacteria. Finally, we show the feasibility of applying our findings to achieve bacterial focusing. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Propulsive force symmetry generated during butterfly swimming

    Directory of Open Access Journals (Sweden)

    Gustavo Soares Pereira

    2015-12-01

    Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2015v17n6p704   The aim of the study was to analyze the hand force symmetry in butterfly swimming. Fourteen male and female swimmers (18.4 ± 4.9 years old, 71.8 ± 14.6 kg of body mass, 1.78 ± 0.09 m of height and mean performance that corresponds to 74.9 ± 5.8% of the world record. Subjects performed three trials of 25 m of butterfly swimming at maximal speed. Mean and maximum forces were estimated for each hand using pressure sensors of the Aquanex System (Swimming Technology Research, USA. The comparisons between force values for dominant and non-dominant hands were made through Student’s T test for dependent samples (p<0.05. In addition, the symmetry Index (SI was calculated as a relative measure of the force applied by each hand. The mean and maximum force for the dominant hand corresponded, respectively, to 55.7 ± 14.7 N and 114.7 ± 39.6 N. For the non-dominant hand, values were 51.2 ± 14.7 N for mean force and 110.7 ± 36.7 N for maximum force. Significant differences were found between dominant and non-dominant hands for both variables (p<0.01. The symmetry index analysis showed mean values of 8.9% for mean force and of 12.6% for maximum force, and most swimmers presented values higher than 10% for mean and/or maximum forces. Further studies should be performed in order to investigate the relationship between hand force symmetry and swimming performance.

  2. Magnus Force and Aharonov-Bohm Effect in Superfluids

    OpenAIRE

    Sonin, E. B.

    2001-01-01

    The paper addresses the problem of the transverse force (Magnus force) on a vortex in a Galilean invariant quantum Bose liquid. Interaction of quasiparticles (phonons) with a vortex produces an additional transverse force (Iordanskii force). The Iordanskii force is related to the acoustic Aharonov--Bohm effect.Connection of the effective Magnus force with the Berry phase is also discussed.

  3. Muon Collider Task Force Report

    International Nuclear Information System (INIS)

    Ankenbrandt, C.; Alexahin, Y.; Balbekov, V.; Barzi, E.; Bhat, C.; Broemmelsiek, D.; Bross, A.; Burov, A.; Drozhdin, A.; Finley, D.; Geer, S.

    2007-01-01

    Muon Colliders offer a possible long term path to lepton-lepton collisions at center-of-mass energies √s (ge) 1 TeV. In October 2006 the Muon Collider Task Force (MCTF) proposed a program of advanced accelerator R and D aimed at developing the Muon Collider concept. The proposed R and D program was motivated by progress on Muon Collider design in general, and in particular, by new ideas that have emerged on muon cooling channel design. The scope of the proposed MCTF R and D program includes muon collider design studies, helical cooling channel design and simulation, high temperature superconducting solenoid studies, an experimental program using beams to test cooling channel RF cavities and a 6D cooling demonstration channel. The first year of MCTF activities are summarized in this report together with a brief description of the anticipated FY08 R and D activities. In its first year the MCTF has made progress on (1) Muon Collider ring studies, (2) 6D cooling channel design and simulation studies with an emphasis on the HCC scheme, (3) beam preparations for the first HPRF cavity beam test, (4) preparations for an HCC four-coil test, (5) further development of the MANX experiment ideas and studies of the muon beam possibilities at Fermilab, (6) studies of how to integrate RF into an HCC in preparation for a component development program, and (7) HTS conductor and magnet studies to prepare for an evaluation of the prospects for of an HTS high-field solenoid build for a muon cooling channel

  4. The effect of patch potentials in Casimir force measurements determined by heterodyne Kelvin probe force microscopy.

    Science.gov (United States)

    Garrett, Joseph L; Somers, David; Munday, Jeremy N

    2015-06-03

    Measurements of the Casimir force require the elimination of the electrostatic force between the surfaces. However, due to electrostatic patch potentials, the voltage required to minimize the total force may not be sufficient to completely nullify the electrostatic interaction. Thus, these surface potential variations cause an additional force, which can obscure the Casimir force signal. In this paper, we inspect the spatially varying surface potential of e-beamed, sputtered, sputtered and annealed, and template stripped gold surfaces with Heterodyne amplitude modulated Kelvin probe force microscopy (HAM-KPFM). It is demonstrated that HAM-KPFM improves the spatial resolution of surface potential measurements compared to amplitude modulated Kelvin probe force microscopy. We find that patch potentials vary depending on sample preparation, and that the calculated pressure can be similar to the pressure difference between Casimir force calculations employing the plasma and Drude models.

  5. Extramuscular myofascial force transmission within the rat anterior tibial compartment: Proximodistal differences in muscle force

    NARCIS (Netherlands)

    Huijing, P.A.J.B.M.; Baan, G.C.

    2001-01-01

    Intramuscular connective tissues are continuous to extramuscular connective tissues. If force is transmitted there, differences should be present between force at proximal and distal attachments of muscles. Extensor digitorum longus (EDL), tibialis anterior (TA), and extensor hallucis longus muscles

  6. Air Force and the Cyberspace Mission: Defending the Air Force's Computer Network in the Future

    National Research Council Canada - National Science Library

    Courville, Shane P

    2007-01-01

    .... Wynne and Air Force Chief of Staff General T. Michael Moseley wrote a joint letter to all airmen of the Air Force, which defined a new mission statement that included the concept of "cyberspace...

  7. Organizing Joint Forces for Information Operations: The Viability of a Joint Force Information Operations Component Commander

    National Research Council Canada - National Science Library

    Seinwill, Jeffrey

    1999-01-01

    ...) as the best way to integrate information operations (IO) into joint forces. Though attractive on the surface, detailed investigation demonstrates that the JFIOCC is not a viable structure for joint force IO...

  8. Software Process Improvement Using Force Field Analysis ...

    African Journals Online (AJOL)

    An improvement plan is then drawn and implemented. This paper studied the state of Nigerian software development organizations based on selected attributes. Force field analysis is used to partition the factors obtained into driving and restraining forces. An attempt was made to improve the software development process ...

  9. Static and dynamical Meissner force fields

    Science.gov (United States)

    Weinberger, B. R.; Lynds, L.; Hull, J. R.; Mulcahy, T. M.

    1991-01-01

    The coupling between copper-based high temperature superconductors (HTS) and magnets is represented by a force field. Zero-field cooled experiments were performed with several forms of superconductors: 1) cold-pressed sintered cylindrical disks; 2) small particles fixed in epoxy polymers; and 3) small particles suspended in hydrocarbon waxes. Using magnets with axial field symmetries, direct spatial force measurements in the range of 0.1 to 10(exp 4) dynes were performed with an analytical balance and force constants were obtained from mechanical vibrational resonances. Force constants increase dramatically with decreasing spatial displacement. The force field displays a strong temperature dependence between 20 and 90 K and decreases exponentially with increasing distance of separation. Distinct slope changes suggest the presence of B-field and temperature-activated processes that define the forces. Hysteresis measurements indicated that the magnitude of force scales roughly with the volume fraction of HTS in composite structures. Thus, the net force resulting from the field interaction appears to arise from regions as small or smaller than the grain size and does not depend on contiguous electron transport over large areas. Results of these experiments are discussed.

  10. Thermal Creep Force: Analysis And Application

    Science.gov (United States)

    2016-06-01

    The boundary condition was inflow and outflow so particles whose trajectory took them outside the simulation space would no longer be simulated and...Calhoun: The NPS Institutional Archive Theses and Dissertations Thesis and Dissertation Collection 2016-06 Thermal creep force: analysis and...CALIFORNIA DISSERTATION Approved for public release; distribution is unlimited THERMAL CREEP FORCE: ANALYSIS AND APPLICATION by David

  11. Radiation forces in the discrete dipole approximation

    NARCIS (Netherlands)

    Hoekstra, A.G.; Frijlink, M.O.; Waters, L.B.F.M.; Sloot, P.M.A.

    2001-01-01

    The theory of the discrete-dipole approximation (DDA) for light scattering is extended to allow for the calculation of radiation forces on each dipole in the DDA model. Starting with the theory of Draine and Weingartner [Astrophys. J. 470, 551 (1996)] we derive an expression for the radiation force

  12. Transition States from Empirical Force Fields

    DEFF Research Database (Denmark)

    Jensen, Frank; Norrby, Per-Ola

    2003-01-01

    This is an overview of the use of empirical force fields in the study of reaction mechanisms. EVB-type methods (including RFF and MCMM) produce full reaction surfaces by mixing, in the simplest case, known force fields describing reactants and products. The SEAM method instead locates approximate...

  13. Nonlinear structural analysis using integrated force method

    Indian Academy of Sciences (India)

    Force method in the pre-computer era was the popular analysis tool for civil, mechanical and aerospace engineering structures. This popularity can be attributed to its ability to determine accurate estimates of forces in the structure. During the formulative period of structural analysis by matrix methods, earnest research was ...

  14. Nonlinear structural analysis using integrated force method

    Indian Academy of Sciences (India)

    During the formulative period of structural analysis by matrix methods, earnest research was directed to automate the force ... (1973) for the analysis of discrete and continuous systems. IFM is a force method of .... (Nagabhushanam & Patnaik 1989) are being developed, which helps the use of efficient solution techniques for ...

  15. 75 FR 28185 - Armed Forces Day, 2010

    Science.gov (United States)

    2010-05-20

    ... days of independence. Today, we have the greatest military force in the history of the world because we... States of America A Proclamation America's Armed Forces represent the very best of our national character... full measure of devotion, to preserve the vision of our forebears and the freedoms we enjoy. Our...

  16. Deriving force field parameters for coordination complexes

    DEFF Research Database (Denmark)

    Norrby, Per-Ola; Brandt, Peter

    2001-01-01

    The process of deriving molecular mechanics force fields for coordination complexes is outlined. Force field basics are introduced with an emphasis on special requirements for metal complexes. The review is then focused on how to set up the initial model, define the target, refine the parameters...

  17. Estimation of Errors in Force Platform Data

    Science.gov (United States)

    Psycharakis, Stelios G.; Miller, Stuart

    2006-01-01

    Force platforms (FPs) are regularly used in the biomechanical analysis of sport and exercise techniques, often in combination with image-based motion analysis. Force time data, particularly when combined with joint positions and segmental inertia parameters, can be used to evaluate the effectiveness of a wide range of movement patterns in sport…

  18. Antiphospholipid Syndrome Clinical Research Task Force Report

    NARCIS (Netherlands)

    Erkan, D.; Derksen, R.; Levy, R.; Machin, S.; Ortel, T.; Pierangeli, S.; Roubey, R.; Lockshin, M.

    The Antiphospholipid Syndrome (APS) Clinical Research Task Force (CRTF) was one of six Task Forces developed by the 13(th) International Congress on Antiphospholipid Antibodies (aPL) organization committee with the purpose of: a) evaluating the limitations of APS clinical research and developing

  19. Homosexuality in the Dutch Armed Forces 2006

    NARCIS (Netherlands)

    Anna Adolfsen; Saskia Keuzenkamp; m.m.v. Linda Mans

    2006-01-01

    Original title: Uniform uit de kast. This study looks at the attitudes of defence personnel to homosexuality. How do members of the military view homosexual colleagues? Can gays and lesbians working in the armed forces be open about their sexual preferences? Do they regard the armed forces as

  20. Proprioception is Robust under External Forces

    NARCIS (Netherlands)

    Kuling, I.A.; Brenner, E.; Smeets, J.B.J.

    2013-01-01

    Information from cutaneous, muscle and joint receptors is combined with efferent information to create a reliable percept of the configuration of our body (proprioception). We exposed the hand to several horizontal force fields to examine whether external forces influence this percept. In an

  1. Tongue force in patients with myasthenia gravis

    NARCIS (Netherlands)

    Weijnen, FG; Kuks, JBM; van der Glas, HW; Wassenberg, MWM; Bosman, F

    2000-01-01

    Objectives - The aim was to study tongue force in patients with bulbar myasthenia gravis and compare it with that of patients with ocular myasthenia gravis, patients in clinical remission who previously suffered from bulbar myasthenia gravis, and healthy subjects. Material and methods - Tongue force

  2. DOUBLE SHEAR DESIGN TO REDUCED STAMPING FORCE

    Directory of Open Access Journals (Sweden)

    Rudi Kurniawan Arief

    2017-12-01

    Full Text Available Ideally processing of part using stamping machine using only 70-80 % of available force to keep machine in good shape for a long periods. But in some certain case the force may equal to or exceed the available maximum force so the company must sent the process to another outsource company. A case found in a metal stamping company where a final product consist of 3 parts to assembly with one part exceeded the force of available machine. This part can only process in a 1000 tons machine while this company only have 2 of this machine with full workload. Sending this parts outsource will induce delivery problems because other parts are processed, assembled and paint inhouse, this also need additional transportation cost and extra supervision to ensure the quality and delivery schedule. The only exit action of this problem is by reducing the force tonnage. This paper using punch inclining method to reduce the force. The incline punch will distributed the force along the inclined surface that reduce stamping force as well. Inclined surface of punch also cause another major problems that the product becoming curved after process. This problems solved with additional flattening process that add more process cost but better than to outsource the process. Chisel type of inclining punch tip was choosen to avoid worst deformation of product. This paper will give the scientific recomendation to the company.

  3. Hydrophobic-hydrophilic forces in protein folding.

    Science.gov (United States)

    Durell, Stewart R; Ben-Naim, Arieh

    2017-08-01

    The process of protein folding is obviously driven by forces exerted on the atoms of the amino-acid chain. These forces arise from interactions with other parts of the protein itself (direct forces), as well as from interactions with the solvent (solvent-induced forces). We present a statistical-mechanical formalism that describes both these direct and indirect, solvent-induced thermodynamic forces on groups of the protein. We focus on 2 kinds of protein groups, commonly referred to as hydrophobic and hydrophilic. Analysis of this result leads to the conclusion that the forces on hydrophilic groups are in general stronger than on hydrophobic groups. This is then tested and verified by a series of molecular dynamics simulations, examining both hydrophobic alkanes of different sizes and hydrophilic moieties represented by polar-neutral hydroxyl groups. The magnitude of the force on assemblies of hydrophilic groups is dependent on their relative orientation: with 2 to 4 times larger forces on groups that are able to form one or more direct hydrogen bonds. © 2017 Wiley Periodicals, Inc.

  4. Entropic forces drive contraction of cytoskeletal networks

    Czech Academy of Sciences Publication Activity Database

    Braun, M.; Lánský, Zdeněk; Hilitski, F.; Dogic, Z.; Diez, S.

    2016-01-01

    Roč. 38, č. 5 (2016), s. 474-481 ISSN 0265-9247 R&D Projects: GA ČR(CZ) GA15-17488S; GA MŠk(CZ) ED1.1.00/02.0109 Institutional support: RVO:86652036 Keywords : cytoskeleton * depletion forces * entropic forces Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 4.441, year: 2016

  5. Chemical driving force for rafting in superalloys

    CSIR Research Space (South Africa)

    Nabarro, FRN

    1997-08-15

    Full Text Available The author provides a brief overview of the chemical driving forces for rafting in superalloys. Until recently, all theories of the driving force for rafting have considered the compositions of the two phases to be fixed, although accepting...

  6. Forced marriage as a crime against humanity

    OpenAIRE

    Czelusniak, Tanja Erika Andersen

    2016-01-01

    Forced marriage is one of the newest crimes against humanity adjudicated at international criminal tribunals. This thesis shall discuss the evolution of this new crime, asking: Has international jurisprudence come to a point of recognition of forced marriage as a separate crime against humanity and if so, is it viable?

  7. Radiation Forces and Torques without Stress (Tensors)

    Science.gov (United States)

    Bohren, Craig F.

    2011-01-01

    To understand radiation forces and torques or to calculate them does not require invoking photon or electromagnetic field momentum transfer or stress tensors. According to continuum electromagnetic theory, forces and torques exerted by radiation are a consequence of electric and magnetic fields acting on charges and currents that the fields induce…

  8. PLA Reforms and Chinas Nuclear Forces

    Science.gov (United States)

    2016-10-01

    at- tempt to eliminate corruption within the force and to enhance political control of the military. Operationally, the reforms appear aimed at...zhanqu budui). A photo essay reporting on Rocket Force joint training hosted on the Web site of the newly created Southern Theater Command stated

  9. Magnetic force microscopy : Quantitative issues in biomaterials

    NARCIS (Netherlands)

    Passeri, D.; Dong, C.; Reggente, M.; Angeloni, L.; Barteri, M.; Scaramuzzo, F.A.; De Angelis, F.; Marinelli, F.; Antonelli, F.; Rinaldi, F.; Marianecci, C.; Carafa, M.; Sorbo, A.; Sordi, D.; Arends, I.W.C.E.; Rossi, M.

    2014-01-01

    Magnetic force microscopy (MFM) is an atomic force microscopy (AFM) based technique in which an AFM tip with a magnetic coating is used to probe local magnetic fields with the typical AFM spatial resolution, thus allowing one to acquire images reflecting the local magnetic properties of the samples

  10. May the Forces Be with You!

    Science.gov (United States)

    Sirola, Christopher

    2018-01-01

    In everyday life, we usually directly note two basic forces: gravity and electromagnetism. Gravity--as in the acceleration due to Earth's gravity--tends to be a background force of sorts, something that is always present and always the same. We don't always see electricity and/or magnetism as such, but their subsidiaries are all around…

  11. Reducing Air Force Fighter Pilot Shortages

    Science.gov (United States)

    2015-12-31

    component to fill inventory requirements in another. The inventory conservation equation at the heart of the model takes the following form: ...requirement by about a third. The next three largest staffs, Pacific Air Forces (PACAF), Air Force Secretariat and Headquarters (SAF/HAF), and

  12. Patterns of Force, Sequences of Resistance

    DEFF Research Database (Denmark)

    Lindegaard, Marie Rosenkrantz; Daniël De Vries, Thomas; Bernasco, Wim

    2018-01-01

    Robberies are improvised encounters involving offender threat, sometimes force, and often victim resistance. While the association between threat, force, and resistance in robberies is well-established, sequential patterns are disputed due to biases of retrospective studies. To overcome these bia...

  13. Force control is related to low-frequency oscillations in force and surface EMG.

    Directory of Open Access Journals (Sweden)

    Hwasil Moon

    Full Text Available Force variability during constant force tasks is directly related to oscillations below 0.5 Hz in force. However, it is unknown whether such oscillations exist in muscle activity. The purpose of this paper, therefore, was to determine whether oscillations below 0.5 Hz in force are evident in the activation of muscle. Fourteen young adults (21.07 ± 2.76 years, 7 women performed constant isometric force tasks at 5% and 30% MVC by abducting the left index finger. We recorded the force output from the index finger and surface EMG from the first dorsal interosseous (FDI muscle and quantified the following outcomes: 1 variability of force using the SD of force; 2 power spectrum of force below 2 Hz; 3 EMG bursts; 4 power spectrum of EMG bursts below 2 Hz; and 5 power spectrum of the interference EMG from 10-300 Hz. The SD of force increased significantly from 5 to 30% MVC and this increase was significantly related to the increase in force oscillations below 0.5 Hz (R(2 = 0.82. For both force levels, the power spectrum for force and EMG burst was similar and contained most of the power from 0-0.5 Hz. Force and EMG burst oscillations below 0.5 Hz were highly coherent (coherence = 0.68. The increase in force oscillations below 0.5 Hz from 5 to 30% MVC was related to an increase in EMG burst oscillations below 0.5 Hz (R(2 = 0.51. Finally, there was a strong association between the increase in EMG burst oscillations below 0.5 Hz and the interference EMG from 35-60 Hz (R(2 = 0.95. In conclusion, this finding demonstrates that bursting of the EMG signal contains low-frequency oscillations below 0.5 Hz, which are associated with oscillations in force below 0.5 Hz.

  14. 26 CFR 301.7701-8 - Military or naval forces and Armed Forces of the United States.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Military or naval forces and Armed Forces of... § 301.7701-8 Military or naval forces and Armed Forces of the United States. The term “military or naval forces of the United States” and the term “Armed Forces of the United States” each includes all regular...

  15. Analysis of experimental data: The average shape of extreme wave forces on monopile foundations and the NewForce model

    DEFF Research Database (Denmark)

    Schløer, Signe; Bredmose, Henrik; Ghadirian, Amin

    2017-01-01

    ’ on top of the smoother underlying force curve. The force shapes are numerically reproduced using a design force model, NewForce, which is introduced here for the first time to both first and second order in wave steepness. For force shapes which are not asymmetric, the NewForce model compares well...

  16. Measurement of tool forces in diamond turning

    Energy Technology Data Exchange (ETDEWEB)

    Drescher, J.; Dow, T.A.

    1988-12-01

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  17. Nanoparticle movement: plasmonic forces and physical constraints.

    Science.gov (United States)

    Batson, P E; Reyes-Coronado, A; Barrera, R G; Rivacoba, A; Echenique, P M; Aizpurua, J

    2012-12-01

    Nanoparticle structures observed in aberration-corrected electron microscopes exhibit many types of behavior, some of which are dominated by intrinsic conditions, unrelated to the microscope environment. Some behaviors are clearly driven by the electron beam, however, and the question arises as to whether these are similar to intrinsic mechanisms, useful for understanding nanoscale behavior, or whether they should be regarded as unwanted modification of as-built specimens. We have studied a particular kind of beam-specimen interaction - plasmon dielectric forces caused by the electric fields imposed by a passing swift electron - identifying four types of forced motion, including both attractive and repulsive forces on single nanoparticles, and coalescent and non-coalescent forces in groups of two or more nanoparticles. We suggest that these forces might be useful for deliberate electron beam guided movement of nanoparticles. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Lactate and force production in skeletal muscle

    DEFF Research Database (Denmark)

    Kristensen, Michael; Albertsen, Janni; Rentsch, Maria

    2005-01-01

    Lactic acid accumulation is generally believed to be involved in muscle fatigue. However, one study reported that in rat soleus muscle (in vitro), with force depressed by high external K+ concentrations a subsequent incubation with lactic acid restores force and thereby protects against fatigue...... muscle. Three incubation solutions were used: 20 mm Na-lactate (which acidifies internal pH), 12 mm Na-lactate +8 mm lactic acid (which mimics the pH changes during muscle activity), and 20 mm lactic acid (which acidifies external pH more than internal pH). All three solutions improved force in K+-depressed...... development in repetitively stimulated muscle (Na-lactate had a negative effect). It is concluded that although lactate/lactic acid incubation regains force in K+-depressed resting muscle, a similar incubation has no or a negative effect on force development in active muscle. It is suggested...

  19. Tendon Force Transmission at the Nanoscale

    DEFF Research Database (Denmark)

    Svensson, René

    2013-01-01

    of connective tissue function that are poorly understood. One such aspect is the microscopic mechanisms of force transmission through tendons over macroscopic distances. Force transmission is at the heart of tendon function, but the large range of scales in the hierarchical structure of tendons has made...... it difficult to tackle. The tendon hierarchy ranges from molecules (2 nm) over fibrils (200 nm), fibers (2 μm) and fascicles (200 μm) to tendons (10 mm), and to derive the mechanisms of force transmission it is necessary to know the mechanical behavior at each hierarchical level. The aim of the present work...... was to elucidate the mechanisms of force transmission in tendons primarily by investigating the mechanical behavior at the hierarchical level of collagen fibrils. To do so we have developed an atomic force microscopy (AFM) method for tensile testing of native collagen fibrils. The thesis contains five papers...

  20. Chiral discrimination by chemical force microscopy

    Science.gov (United States)

    McKendry, Rachel; Theoclitou, Maria-Elena; Rayment, Trevor; Abell, Chris

    1998-02-01

    Chirality is a fundamental aspect of chemical biology, and is of central importance in pharmacology. Consequently there is great interest in techniques for distinguishing between different chiral forms of a compound. Chemical force microscopy is a technique that combines chemical discrimination with atomic force microscopy by chemical derivatization of the scanning probe tip. It has been applied to the study of hydrophobic and hydrophilic interactions, the binding between biotin and streptavidin, and between DNA bases. Here we report on the use of chemical force microscopy to discriminate between chiral molecules. Using chiral molecules attached to the probe tip, we can distinguish the two enantiomers of mandelic acid arrayed on a surface, through differences in both the adhesion forces and the frictional forces measured by the probe.

  1. Cutaneous mechanisms of isometric ankle force control

    DEFF Research Database (Denmark)

    Choi, Julia T; Jensen, Jesper Lundbye; Leukel, Christian

    2013-01-01

    The sense of force is critical in the control of movement and posture. Multiple factors influence our perception of exerted force, including inputs from cutaneous afferents, muscle afferents and central commands. Here, we studied the influence of cutaneous feedback on the control of ankle force...... output. We used repetitive electrical stimulation of the superficial peroneal (foot dorsum) and medial plantar nerves (foot sole) to disrupt cutaneous afferent input in 8 healthy subjects. We measured the effects of repetitive nerve stimulation on (1) tactile thresholds, (2) performance in an ankle force......-matching and (3) an ankle position-matching task. Additional force-matching experiments were done to compare the effects of transient versus continuous stimulation in 6 subjects and to determine the effects of foot anesthesia using lidocaine in another 6 subjects. The results showed that stimulation decreased...

  2. Roughness in Surface Force Measurements: Extension of DLVO Theory To Describe the Forces between Hafnia Surfaces.

    Science.gov (United States)

    Eom, Namsoon; Parsons, Drew F; Craig, Vincent S J

    2017-07-06

    The interaction between colloidal particles is commonly viewed through the lens of DLVO theory, whereby the interaction is described as the sum of the electrostatic and dispersion forces. For similar materials acting across a medium at pH values remote from the isoelectric point the theory typically involves an electrostatic repulsion that is overcome by dispersion forces at very small separations. However, the dominance of the dispersion forces at short separations is generally not seen in force measurements, with the exception of the interaction between mica surfaces. The discrepancy for silica surfaces has been attributed to hydration forces, but this does not explain the situation for titania surfaces where the dispersion forces are very much larger. Here, the interaction forces between very smooth hafnia surfaces have been measured using the colloid probe technique and the forces evaluated within the DLVO framework, including both hydration forces and the influence of roughness. The measured forces across a wide range of pH at different salt concentrations are well described with a single parameter for the surface roughness. These findings show that even small degrees of surface roughness significantly alter the form of the interaction force and therefore indicate that surface roughness needs to be included in the evaluation of surface forces between all surfaces that are not ideally smooth.

  3. Adhesion force imaging in air and liquid by adhesion mode atomic force microscopy

    NARCIS (Netherlands)

    van der Werf, Kees; Putman, C.A.J.; Putman, Constant A.; de Grooth, B.G.; Greve, Jan

    1994-01-01

    A new imaging mode for the atomic force microscope(AFM), yielding images mapping the adhesion force between tip and sample, is introduced. The adhesion mode AFM takes a force curve at each pixel by ramping a piezoactuator, moving the silicon‐nitride tip up and down towards the sample. During the

  4. Finger forces in fastball baseball pitching.

    Science.gov (United States)

    Kinoshita, Hiroshi; Obata, Satoshi; Nasu, Daiki; Kadota, Koji; Matsuo, Tomoyuki; Fleisig, Glenn S

    2017-08-01

    Forces imparted by the fingers onto a baseball are the final, critical aspects for pitching, however these forces have not been quantified previously as no biomechanical technology was available. In this study, an instrumented baseball was developed for direct measurement of ball reaction force by individual fingers and used to provide fundamental information on the forces during a fastball pitch. A tri-axial force transducer with a cable having an easily-detachable connector were installed in an official baseball. Data were collected from 11 pitchers who placed the fingertip of their index, middle, ring, or thumb on the transducer, and threw four-seam fastballs to a target cage from a flat mound. For the index and middle fingers, resultant ball reaction force exhibited a bimodal pattern with initial and second peaks at 38-39ms and 6-7ms before ball release, and their amplitudes were around 97N each. The ring finger and thumb produced single-peak forces of approximately 50 and 83N, respectively. Shear forces for the index and middle fingers formed distinct peak at 4-5ms before release, and the peaks summed to 102N; a kinetic source for backspin on the ball. An additional experiment with submaximal pitching effort showed a linear relationship of peak forces with ball velocity. The peak ball reaction force for fastballs exceeded 80% of maximum finger strength measured, suggesting that strengthening of the distal muscles is important both for enhancing performance and for avoiding injuries. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Sparse regularization for force identification using dictionaries

    Science.gov (United States)

    Qiao, Baijie; Zhang, Xingwu; Wang, Chenxi; Zhang, Hang; Chen, Xuefeng

    2016-04-01

    The classical function expansion method based on minimizing l2-norm of the response residual employs various basis functions to represent the unknown force. Its difficulty lies in determining the optimum number of basis functions. Considering the sparsity of force in the time domain or in other basis space, we develop a general sparse regularization method based on minimizing l1-norm of the coefficient vector of basis functions. The number of basis functions is adaptively determined by minimizing the number of nonzero components in the coefficient vector during the sparse regularization process. First, according to the profile of the unknown force, the dictionary composed of basis functions is determined. Second, a sparsity convex optimization model for force identification is constructed. Third, given the transfer function and the operational response, Sparse reconstruction by separable approximation (SpaRSA) is developed to solve the sparse regularization problem of force identification. Finally, experiments including identification of impact and harmonic forces are conducted on a cantilever thin plate structure to illustrate the effectiveness and applicability of SpaRSA. Besides the Dirac dictionary, other three sparse dictionaries including Db6 wavelets, Sym4 wavelets and cubic B-spline functions can also accurately identify both the single and double impact forces from highly noisy responses in a sparse representation frame. The discrete cosine functions can also successfully reconstruct the harmonic forces including the sinusoidal, square and triangular forces. Conversely, the traditional Tikhonov regularization method with the L-curve criterion fails to identify both the impact and harmonic forces in these cases.

  6. Debate about anthropogenic radiative forcing

    International Nuclear Information System (INIS)

    Anon

    2001-01-01

    A recent paper by James Hansen and colleagues at the NASA Goddard Institute for Space Studies in the Proceedings of the National Academy of Science has been widely interpreted in the media, incorrectly as it turned out, that Hansen has changed his earlier views and concerns about climate change, that he no longer considers fossil fuel combustion as the primary concern in international efforts to reduce the risk of climate change. Some have gone so far as to cite the Hansen paper as further evidence that the ratification and implementation of the Kyoto protocols would be inappropriate. Despite various rebuttals, the confusion about Hansen's conclusion continues to persist. This analysis attempts to summarize the the key points made by Hansen and his colleagues, and to place their comments in the general context of the international science community, and to assess the real policy implications. The gist of the comments by Hansen et al. is that future growth rates in CO 2 concentrations may be weaker than some 'business as usual' scenarios suggest. If so, efforts to control CO 2 growth would be easier than presently assumed. The slower growth appears to be due to larger uptake of emitted CO 2 into the oceans and terrestrial biosphere. However, Hansen et al. also acknowledge that this enhanced sink may be temporary, and have in fact been increasing in recent years, and therefore to maintain a continued slow growth rate for CO 2 concentrations, fossil fuel emissions have to become lower than currently projected in 'business as usual' scenarios. The alternative mitigation scenario proposed by Hansen et al. promotes concentrated efforts to reduce emissions of non-CO 2 greenhouse gases. Hansen and co-workers suggest that reduction of non C O 2 emissions would probably allow forcing due to CO 2 emissions to increase a further 1 W/sq m by 2050 without compromising efforts to avoid dangerous climate change. These reviewers believe that the key feature of the Hansen approach

  7. Radiative Forcing Over Ocean by Ship Wakes

    Science.gov (United States)

    Gatebe, Charles K.; Wilcox, E.; Poudyal, R.; Wang, J.

    2011-01-01

    Changes in surface albedo represent one of the main forcing agents that can counteract, to some extent, the positive forcing from increasing greenhouse gas concentrations. Here, we report on enhanced ocean reflectance from ship wakes over the Pacific Ocean near the California coast, where we determined, based on airborne radiation measurements that ship wakes can increase reflected sunlight by more than 100%. We assessed the importance of this increase to climate forcing, where we estimated the global radiative forcing of ship wakes to be -0.00014 plus or minus 53% Watts per square meter assuming a global distribution of 32331 ships of size of greater than or equal to 100000 gross tonnage. The forcing is smaller than the forcing of aircraft contrails (-0.007 to +0.02 Watts per square meter), but considering that the global shipping fleet has rapidly grown in the last five decades and this trend is likely to continue because of the need of more inter-continental transportation as a result of economic globalization, we argue that the radiative forcing of wakes is expected to be increasingly important especially in harbors and coastal regions.

  8. Negative Knudsen force on heated microbeams

    KAUST Repository

    Zhu, Taishan

    2011-11-18

    Knudsen force acting on a heated microbeam adjacent to a cold substrate in a rarefied gas is a mechanical force created by unbalanced thermal gradients. The measured force has its direction pointing towards the side with a lower thermal gradient and its magnitude vanishes in both continuum and free-molecule limits. In our previous study, negative Knudsen forces were discovered at the high Knudsen regime before diminishing in the free-molecule limit. Such a phenomenon was, however, neither observed in experiment [A. Passian et al., Phys. Rev. Lett. 90, 124503 (2003)], nor captured in the latest numerical study [J. Nabeth et al., Phys. Rev. E 83, 066306 (2011)]. In this paper, the existence of such a negative Knudsen force is further confirmed using both numerical simulation and theoretical analysis. The asymptotic order of the Knudsen force near the collisionless limit is analyzed and the analytical expression of its leading term is provided, from which approaches for the enhancement of negative Knudsen forces are proposed. The discovered phenomenon could find its applications in novel mechanisms for pressure sensing and actuation.

  9. Force generation within tissues during development

    Science.gov (United States)

    Kasza, Karen

    During embryonic development, multicellular tissues physically change shape, move, and grow. Changes in epithelial tissue organization are often accomplished by local movements of cells that are driven largely by forces generated by the motor protein myosin II. These forces are patterned to orient cell movements, resulting in changes in tissue shape and organization to build functional tissues and organs. To investigate the mechanisms of force generation in vivo, we use the fruit fly embryo as a model system. Spatial patterns of forces orient cell movements to drive rapid tissue elongation along the head-to-tail axis of the embryo. I will describe how studying embryos generated with engineered myosin variants provides insight into where, when, and how forces are generated to efficiently reorganize tissues. We found that a myosin variant that is locked-in to the active or ``on'' state accelerates cell movements, while two mutant myosin variants associated with human disease produce slowed cell movement. These myosin variants all disrupt tissue elongation, but live imaging and biophysical measurements reveal distinct effects on myosin organization and dynamics within cells and uncover mechanisms that control the spatial and temporal patterns of force generation. These studies shed light not only on how defects in force generation contribute to disease but also on physical principles at work in active, living materials.

  10. Unfolding of globular polymers by external force

    Energy Technology Data Exchange (ETDEWEB)

    Bell, Samuel; Terentjev, Eugene M., E-mail: emt1000@cam.ac.uk [Cavendish Laboratory, University of Cambridge, J.J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

    2015-11-14

    We examine the problem of a polymer chain, folded into a globule in poor solvent, subjected to a constant tensile force. Such a situation represents a Gibbs thermodynamic ensemble and is useful for analysing force-clamp atomic force microscopy measurements, now very common in molecular biophysics. Using a basic Flory mean-field theory, we account for surface interactions of monomers with solvent. Under an increasing tensile force, a first-order phase transition occurs from a compact globule to a fully extended chain, in an “all-or-nothing” unfolding event. This contrasts with the regime of imposed extension, first studied by Halperin and Zhulina [Europhys. Lett. 15, 417 (1991)], where there is a regime of coexistence of a partial globule with an extended chain segment. We relate the transition forces in this problem to the solvent quality and degree of polymerisation, and also find analytical expressions for the energy barriers present in the problem. Using these expressions, we analyse the kinetic problem of a force-ramp experiment and show that the force at which a globule ruptures depends on the rate of loading.

  11. Axion forces, gravity experiments and T violation

    International Nuclear Information System (INIS)

    Moody, J.E.

    1984-01-01

    A variety of light, weakly-coupled bosons have recently been suggested. Among them is the axion. This thesis considers the possibility of detecting axions or other light bosons via the macroscopic forces they mediate. The motivation for the axion is reviewed along with a detailed calculation of its mass and couplings. The microphysical basis of macroscopic forces is described and the three distinct axion force laws are thereby obtained. Of particular interest is the unique P and T violating monopole-dipole force. The magnitudes and ranges of axion forces are compared with the existing experimental limits. The possibilities for searching for (monopole) 2 , spin-spin and monopole-dipole forces are evaluated. Monopole-dipole experiments seem promising because the sensitive high-Q techniques of gravity wave research are applicable. Ultimate sensitivity, as limited by thermal noise, is evaluated for crystal oscillators and levitated systems. The very interesting problem of quantum uncertainty in weak force measurement is considered along with a way of getting around it called back action evasion. This is followed by a presentation of signal to noise analysis which folds together amplifier noise, quantum uncertainty, and Langevin noise

  12. Detecting chameleons through Casimir force measurements

    International Nuclear Information System (INIS)

    Brax, Philippe; Bruck, Carsten van de; Davis, Anne-Christine; Shaw, Douglas; Mota, David F.

    2007-01-01

    The best laboratory constraints on strongly coupled chameleon fields come not from tests of gravity per se but from precision measurements of the Casimir force. The chameleonic force between two nearby bodies is more akin to a Casimir-like force than a gravitational one: The chameleon force behaves as an inverse power of the distance of separation between the surfaces of two bodies, just as the Casimir force does. Additionally, experimental tests of gravity often employ a thin metallic sheet to shield electrostatic forces; however, this sheet masks any detectable signal due to the presence of a strongly coupled chameleon field. As a result of this shielding, experiments that are designed to specifically test the behavior of gravity are often unable to place any constraint on chameleon fields with a strong coupling to matter. Casimir force measurements do not employ a physical electrostatic shield and as such are able to put tighter constraints on the properties of chameleons fields with a strong matter coupling than tests of gravity. Motivated by this, we perform a full investigation on the possibility of testing chameleon models with both present and future Casimir experiments. We find that present-day measurements are not able to detect the chameleon. However, future experiments have a strong possibility of detecting or rule out a whole class of chameleon models

  13. Piezoresistive cantilever force-clamp system

    International Nuclear Information System (INIS)

    Park, Sung-Jin; Petzold, Bryan C.; Pruitt, Beth L.; Goodman, Miriam B.

    2011-01-01

    We present a microelectromechanical device-based tool, namely, a force-clamp system that sets or ''clamps'' the scaled force and can apply designed loading profiles (e.g., constant, sinusoidal) of a desired magnitude. The system implements a piezoresistive cantilever as a force sensor and the built-in capacitive sensor of a piezoelectric actuator as a displacement sensor, such that sample indentation depth can be directly calculated from the force and displacement signals. A programmable real-time controller operating at 100 kHz feedback calculates the driving voltage of the actuator. The system has two distinct modes: a force-clamp mode that controls the force applied to a sample and a displacement-clamp mode that controls the moving distance of the actuator. We demonstrate that the system has a large dynamic range (sub-nN up to tens of μN force and nm up to tens of μm displacement) in both air and water, and excellent dynamic response (fast response time, <2 ms and large bandwidth, 1 Hz up to 1 kHz). In addition, the system has been specifically designed to be integrated with other instruments such as a microscope with patch-clamp electronics. We demonstrate the capabilities of the system by using it to calibrate the stiffness and sensitivity of an electrostatic actuator and to measure the mechanics of a living, freely moving Caenorhabditis elegans nematode.

  14. Capacitance dilatometry in a surface force apparatus

    International Nuclear Information System (INIS)

    Stewart, A.M.

    2003-01-01

    Full text: A variant of the surface force apparatus has been developed which enables measurements of the forces between opaque surfaces to be obtained. A capacitance dilatometry attachment for the surface force apparatus has been constructed in which the surface that moves under the influence of the applied force is attached to one plate of a capacitor whose capacitance thereby changes. In order to detect movements of 0.1 nm of the plates of a capacitor with gap 0.1 mm the capacitance has to be measured to one part in one million, noting further that the measured capacitance is several hundred times smaller than the associated stray capacitances. This resolution is achieved by means of a transformer ratio bridge and, provided that adequate vibration isolation can be achieved, displacements of 0.1 nm can be resolved reliably. This is the case even with air between the surfaces, air giving much less vibrational damping than liquids. The method has been applied to measure the forces between mica in electrolyte and to measure dispersion forces of mica and silica in air. In the latter case the results are of unprecedented accuracy for this technique and show unambiguously that for surface separations greater than 10 nm the retarded form of the dispersion force fits the measurements much better than the non-retarded form

  15. Hip joint contact forces calculated using different muscle optimization techniques

    OpenAIRE

    Wesseling, M.; Derikx, L.C.; de Groote, F.; Bartels, W.; Meyer, C.; Verdonschot, Nicolaas Jacobus Joseph; Jonkers, I.

    2013-01-01

    The goal of this study was to calculate muscle forces using different optimization techniques and investigate their effect on hip joint contact forces in gait and sit to stand. These contact forces were compared to measured hip contact forces [3]. The results showed that contact forces were overestimated, especially when muscle forces were calculated using computed muscle control. For static optimization, results were closest to measured contact forces. Also, differences between measured and ...

  16. Kinetic Ductility and Force-Spike Resistance of Proteins from Single-Molecule Force Spectroscopy.

    Science.gov (United States)

    Cossio, Pilar; Hummer, Gerhard; Szabo, Attila

    2016-08-23

    Ductile materials can absorb spikes in mechanical force, whereas brittle ones fail catastrophically. Here we develop a theory to quantify the kinetic ductility of single molecules from force spectroscopy experiments, relating force-spike resistance to the differential responses of the intact protein and the unfolding transition state to an applied mechanical force. We introduce a class of unistable one-dimensional potential surfaces that encompass previous models as special cases and continuously cover the entire range from ductile to brittle. Compact analytic expressions for force-dependent rates and rupture-force distributions allow us to analyze force-clamp and force-ramp pulling experiments. We find that the force-transmitting protein domains of filamin and titin are kinetically ductile when pulled from their two termini, making them resistant to force spikes. For the mechanostable muscle protein titin, a highly ductile model reconciles data over 10 orders of magnitude in force loading rate from experiment and simulation. Copyright © 2016 Biophysical Society. All rights reserved.

  17. High Cable Forces Deteriorate Pinch Force Control in Voluntary-Closing Body-Powered Prostheses.

    Directory of Open Access Journals (Sweden)

    Mona Hichert

    Full Text Available It is generally asserted that reliable and intuitive control of upper-limb prostheses requires adequate feedback of prosthetic finger positions and pinch forces applied to objects. Body-powered prostheses (BPPs provide the user with direct proprioceptive feedback. Currently available BPPs often require high cable operation forces, which complicates control of the forces at the terminal device. The aim of this study is to quantify the influence of high cable forces on object manipulation with voluntary-closing prostheses.Able-bodied male subjects were fitted with a bypass-prosthesis with low and high cable force settings for the prehensor. Subjects were requested to grasp and transfer a collapsible object as fast as they could without dropping or breaking it. The object had a low and a high breaking force setting.Subjects conducted significantly more successful manipulations with the low cable force setting, both for the low (33% more and high (50% object's breaking force. The time to complete the task was not different between settings during successful manipulation trials.High cable forces lead to reduced pinch force control during object manipulation. This implies that low cable operation forces should be a key design requirement for voluntary-closing BPPs.

  18. Variable Acceleration Force Calibration System (VACS)

    Science.gov (United States)

    Rhew, Ray D.; Parker, Peter A.; Johnson, Thomas H.; Landman, Drew

    2014-01-01

    Conventionally, force balances have been calibrated manually, using a complex system of free hanging precision weights, bell cranks, and/or other mechanical components. Conventional methods may provide sufficient accuracy in some instances, but are often quite complex and labor-intensive, requiring three to four man-weeks to complete each full calibration. To ensure accuracy, gravity-based loading is typically utilized. However, this often causes difficulty when applying loads in three simultaneous, orthogonal axes. A complex system of levers, cranks, and cables must be used, introducing increased sources of systematic error, and significantly increasing the time and labor intensity required to complete the calibration. One aspect of the VACS is a method wherein the mass utilized for calibration is held constant, and the acceleration is changed to thereby generate relatively large forces with relatively small test masses. Multiple forces can be applied to a force balance without changing the test mass, and dynamic forces can be applied by rotation or oscillating acceleration. If rotational motion is utilized, a mass is rigidly attached to a force balance, and the mass is exposed to a rotational field. A large force can be applied by utilizing a large rotational velocity. A centrifuge or rotating table can be used to create the rotational field, and fixtures can be utilized to position the force balance. The acceleration may also be linear. For example, a table that moves linearly and accelerates in a sinusoidal manner may also be utilized. The test mass does not have to move in a path that is parallel to the ground, and no re-leveling is therefore required. Balance deflection corrections may be applied passively by monitoring the orientation of the force balance with a three-axis accelerometer package. Deflections are measured during each test run, and adjustments with respect to the true applied load can be made during the post-processing stage. This paper will

  19. Traction forces exerted by epithelial cell sheets

    International Nuclear Information System (INIS)

    Saez, A; Anon, E; Ghibaudo, M; Di Meglio, J-M; Hersen, P; Ladoux, B; Du Roure, O; Silberzan, P; Buguin, A

    2010-01-01

    Whereas the adhesion and migration of individual cells have been well described in terms of physical forces, the mechanics of multicellular assemblies is still poorly understood. Here, we study the behavior of epithelial cells cultured on microfabricated substrates designed to measure cell-to-substrate interactions. These substrates are covered by a dense array of flexible micropillars whose deflection enables us to measure traction forces. They are obtained by lithography and soft replica molding. The pillar deflection is measured by video microscopy and images are analyzed with home-made multiple particle tracking software. First, we have characterized the temporal and spatial distributions of traction forces of cellular assemblies of various sizes. The mechanical force balance within epithelial cell sheets shows that the forces exerted by neighboring cells strongly depend on their relative position in the monolayer: the largest deformations are always localized at the edge of the islands of cells in the active areas of cell protrusions. The average traction stress rapidly decreases from its maximum value at the edge but remains much larger than the inherent noise due to the force resolution of our pillar tracking software, indicating an important mechanical activity inside epithelial cell islands. Moreover, these traction forces vary linearly with the rigidity of the substrate over about two decades, suggesting that cells exert a given amount of deformation rather than a force. Finally, we engineer micropatterned substrates supporting pillars with anisotropic stiffness. On such substrates cellular growth is aligned with respect to the stiffest direction in correlation with the magnitude of the applied traction forces.

  20. Forced sterilization of women as discrimination.

    Science.gov (United States)

    Patel, Priti

    2017-01-01

    There has been a long history of subjecting marginalized women to forced and coerced sterilization. In recent years, the practice has been documented in countries in North and South America, Europe, Asia, and Africa. It has targeted women who are ethnic and racial minorities, women with disabilities, women living with HIV, and poor women. A handful of courts have issued decisions on the recent forced sterilization of marginalized women finding that such actions violate the women's rights. However, they have all failed to address the women's claims of discrimination. The failure to acknowledge that forced sterilization is at its core a violation of the prohibition of discrimination undermines efforts to eradicate the practice. It further fails to recognize that coerced and forced sterilization fundamentally seeks to deny women deemed as "unworthy" the ability to procreate. Four key principles outlined in the human rights in patient care framework highlight the importance of a finding that the prohibition of discrimination was violated in cases of forced sterilization: the need to highlight the vulnerability of marginalized populations to discrimination in health care settings; the importance of the rights of medical providers; the role of the state in addressing systemic human rights violations in health care settings; and the application of human rights to patient care. Based on these principles, it is clear that finding a violation of the prohibition of discrimination in forced sterilization cases is critical in addressing the systemic nature of the practice, acknowledging the marginalization of specific groups and effectively ending forced sterilization through addressing the underlying purpose of the practice. If litigators, non-governmental organizations and judicial officers are mindful of these principles when dealing with cases of forced sterilization, it is likely that they will be better able to eradicate forced sterilization.

  1. Minimizing pulling geometry errors in atomic force microscope single molecule force spectroscopy.

    Science.gov (United States)

    Rivera, Monica; Lee, Whasil; Ke, Changhong; Marszalek, Piotr E; Cole, Daniel G; Clark, Robert L

    2008-10-01

    In atomic force microscopy-based single molecule force spectroscopy (AFM-SMFS), it is assumed that the pulling angle is negligible and that the force applied to the molecule is equivalent to the force measured by the instrument. Recent studies, however, have indicated that the pulling geometry errors can drastically alter the measured force-extension relationship of molecules. Here we describe a software-based alignment method that repositions the cantilever such that it is located directly above the molecule's substrate attachment site. By aligning the applied force with the measurement axis, the molecule is no longer undergoing combined loading, and the full force can be measured by the cantilever. Simulations and experimental results verify the ability of the alignment program to minimize pulling geometry errors in AFM-SMFS studies.

  2. High-speed force mapping on living cells with a small cantilever atomic force microscope

    Energy Technology Data Exchange (ETDEWEB)

    Braunsmann, Christoph; Seifert, Jan; Rheinlaender, Johannes; Schäffer, Tilman E., E-mail: Tilman.Schaeffer@uni-tuebingen [Institute of Applied Physics and LISA, University of Tübingen, Auf der Morgenstelle 10, 72076 Tübingen (Germany)

    2014-07-15

    The imaging speed of the wide-spread force mapping mode for quantitative mechanical measurements on soft samples in liquid with the atomic force microscope (AFM) is limited by the bandwidth of the z-scanner and viscous drag forces on the cantilever. Here, we applied high-speed, large scan-range atomic force microscopy and small cantilevers to increase the speed of force mapping by ≈10−100 times. This allowed resolving dynamic processes on living mouse embryonic fibroblasts. Cytoskeleton reorganization during cell locomotion, growth of individual cytoskeleton fibers, cell blebbing, and the formation of endocytic pits in the cell membrane were observed. Increasing the force curve rate from 2 to 300 Hz increased the measured apparent Young's modulus of the cells by about 10 times, which facilitated force mapping measurements at high speed.

  3. High-speed force mapping on living cells with a small cantilever atomic force microscope

    International Nuclear Information System (INIS)

    Braunsmann, Christoph; Seifert, Jan; Rheinlaender, Johannes; Schäffer, Tilman E.

    2014-01-01

    The imaging speed of the wide-spread force mapping mode for quantitative mechanical measurements on soft samples in liquid with the atomic force microscope (AFM) is limited by the bandwidth of the z-scanner and viscous drag forces on the cantilever. Here, we applied high-speed, large scan-range atomic force microscopy and small cantilevers to increase the speed of force mapping by ≈10−100 times. This allowed resolving dynamic processes on living mouse embryonic fibroblasts. Cytoskeleton reorganization during cell locomotion, growth of individual cytoskeleton fibers, cell blebbing, and the formation of endocytic pits in the cell membrane were observed. Increasing the force curve rate from 2 to 300 Hz increased the measured apparent Young's modulus of the cells by about 10 times, which facilitated force mapping measurements at high speed

  4. Method for lateral force calibration in atomic force microscope using MEMS microforce sensor.

    Science.gov (United States)

    Dziekoński, Cezary; Dera, Wojciech; Jarząbek, Dariusz M

    2017-11-01

    In this paper we present a simple and direct method for the lateral force calibration constant determination. Our procedure does not require any knowledge about material or geometrical parameters of an investigated cantilever. We apply a commercially available microforce sensor with advanced electronics for direct measurement of the friction force applied by the cantilever's tip to a flat surface of the microforce sensor measuring beam. Due to the third law of dynamics, the friction force of the equal value tilts the AFM cantilever. Therefore, torsional (lateral force) signal is compared with the signal from the microforce sensor and the lateral force calibration constant is determined. The method is easy to perform and could be widely used for the lateral force calibration constant determination in many types of atomic force microscopes. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Inductively Modeling Parallel, Normal, and Frictional Forces

    Science.gov (United States)

    Wyrembeck, Edward P.

    2005-02-01

    This year, instead of resolving the weight mg of an object resting on an incline into force components parallel and perpendicular to the surface of the incline, I asked my students to actually measure these forces at various angles of inclination and graph the data. I wanted my students to inductively discover mg sin θ and mg cos θ, and to use these graphs to confront the passive nature of the static frictional force. I believe the graphs themselves are very powerful conceptual tools that are often never discovered and used by students who only learn to use equations at specific angles to solve specific quantitative problems.

  6. Reconstruction of driving forces through recurrence plots

    International Nuclear Information System (INIS)

    Tanio, Masaaki; Hirata, Yoshito; Suzuki, Hideyuki

    2009-01-01

    We consider the problem of reconstructing one-dimensional driving forces only from the observations of driven systems. We extend the approach presented in a seminal paper [M.C. Casdagli, Physica D 108 (1997) 12] and propose a method that is robust and has wider applicability. By reinterpreting the work of Thiel et al. [M. Thiel, M.C. Romano, J. Kurths, Phys. Lett. A 330 (2004) 343], we formulate the reconstruction problem as a combinatorial optimization problem and relax conditions by assuming that a driving force is continuous. The method is demonstrated by using a tent map driven by an external force.

  7. Diversity in the Danish Armed Forces

    DEFF Research Database (Denmark)

    Schaub Jr, Gary John; Pradhan-Blach, Flemming; Larsen, Esben Salling

    The Danish Armed Forces face the functional imperative of becoming a smaller, professional expeditionary force and the societal imperative of including women and ethnic minorities. It currently lags behind its NATO partners in gender and ethnic diversity. Lessons to be learned from NATO members...... with more diverse militaries, such as the United States, Great Britain, and Canada, include recognition of diversity as a societal imperative to sustain the legitimacy of the armed forces, the necessity of systematically collecting and reporting personnel data to guide policy, the necessity of patience...

  8. Sensing Current and Forces with SPM

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jeong Y.; Maier, Sabine; Hendriksen, Bas; Salmeron, Miquel

    2010-07-02

    Atomic force microscopy (AFM) and scanning tunneling microscopy (STM) are well established techniques to image surfaces and to probe material properties at the atomic and molecular scale. In this review, we show hybrid combinations of AFM and STM that bring together the best of two worlds: the simultaneous detection of atomic scale forces and conduction properties. We illustrate with several examples how the detection of forces during STM and the detection of currents during AFM can give valuable additional information of the nanoscale material properties.

  9. Nonequilibrium forces between dragged ultrasoft colloids.

    Science.gov (United States)

    Singh, Sunil P; Winkler, Roland G; Gompper, Gerhard

    2011-10-07

    The dynamical deformation of ultrasoft colloids as well as their dynamic frictional forces are numerically investigated, when one colloid is dragged past another at constant velocity. Hydrodynamic interactions are captured by a particle-based mesoscopic simulation method. At vanishing relative velocity, the equilibrium repulsive force-distance curve is obtained. At large drag velocities, in contrast, we find an apparent attractive force for departing colloids along the dragging direction. The deformation, in the close encounter of colloids, and the energy dissipation are examined as a function of the drag velocity and their separation.

  10. Maternal Endogenous Forces and Shoulder Dystocia.

    Science.gov (United States)

    Grimm, Michele J

    2016-12-01

    Childbirth is a complicated biomechanical process that many take for granted. However, the delivery forces generated by a mother (uterine contractions and maternal pushing) are strong and have a significant effect on the body and tissues of the fetus, especially during the second stage of labor. Although most infants are born without negative, force-related outcomes, in some infants the normal forces of labor cause an injury that can have either temporary or permanent sequelae. The biomechanical situation is further complicated when an infant's shoulder impacts the maternal pelvis, which provides increased resistance and creates added stresses within the neonatal body and tissues.

  11. Static optimization of muscle forces during gait in comparison to EMG-to-force processing approach.

    Science.gov (United States)

    Heintz, Sofia; Gutierrez-Farewik, Elena M

    2007-07-01

    Individual muscle forces evaluated from experimental motion analysis may be useful in mathematical simulation, but require additional musculoskeletal and mathematical modelling. A numerical method of static optimization was used in this study to evaluate muscular forces during gait. The numerical algorithm used was built on the basis of traditional optimization techniques, i.e., constrained minimization technique using the Lagrange multiplier method to solve for constraints. Measuring exact muscle forces during gait analysis is not currently possible. The developed optimization method calculates optimal forces during gait, given a specific performance criterion, using kinematics and kinetics from gait analysis together with muscle architectural data. Experimental methods to validate mathematical methods to calculate forces are limited. Electromyography (EMG) is frequently used as a tool to determine muscle activation in experimental studies on human motion. A method of estimating force from the EMG signal, the EMG-to-force approach, was recently developed by Bogey et al. [Bogey RA, Perry J, Gitter AJ. An EMG-to-force processing approach for determining ankle muscle forcs during normal human gait. IEEE Trans Neural Syst Rehabil Eng 2005;13:302-10] and is based on normalization of activation during a maximum voluntary contraction to documented maximal muscle strength. This method was adapted in this study as a tool with which to compare static optimization during a gait cycle. Muscle forces from static optimization and from EMG-to-force muscle forces show reasonably good correlation in the plantarflexor and dorsiflexor muscles, but less correlation in the knee flexor and extensor muscles. Additional comparison of the mathematical muscle forces from static optimization to documented averaged EMG data reveals good overall correlation to patterns of evaluated muscular activation. This indicates that on an individual level, muscular force patterns from mathematical

  12. Detecting the Curvature of de Sitter Universe with Two Entangled Atoms.

    Science.gov (United States)

    Tian, Zehua; Wang, Jieci; Jing, Jiliang; Dragan, Andrzej

    2016-10-12

    Casimir-Polder interaction arises from the vacuum fluctuations of quantum field that depend on spacetime curvature and thus is spacetime-dependent. Here we show how to use the resonance Casimir-Polder interaction (RCPI) between two entangled atoms to detect spacetime curvature. We find that the RCPI of two static entangled atoms in the de Sitter-invariant vacuum depends on the de Sitter spacetime curvature relevant to the temperature felt by the static observer. It is characterized by a 1/L 2 power law decay when beyond a characteristic length scale associated to the breakdown of a local inertial description of the two-atom system. However, the RCPI of the same setup embedded in a thermal bath in the Minkowski universe is temperature-independent and is always characterized by a 1/L power law decay. Therefore, although a single static atom in the de Sitter-invariant vacuum responds as if it were bathed in thermal radiation in a Minkowski universe, using the distinct difference between RCPI of two entangled atoms one can in principle distinguish these two universes.

  13. PREFACE: Quantum Field Theory Under the Influence of External Conditions (QFEXT07)

    Science.gov (United States)

    Bordag, M.; Mostepanenko, V. M.

    2008-04-01

    , the vacuum energy manifests itself as quantum corrections to masses of classical background fields like solitons. In astrophysics and cosmology it is discussed as a possible source for dark energy. The growing interest in this field can be judged from the number of citations received each year by the original paper by Casimir. This is shown in figure 1 (below). Although such numbers must be viewed with caution, the increase of citations over the past decade is impressive. The most significant progress in the field during the last few years was made in the following three directions: precision measurements of the Casimir and Casimir Polder force, applications of the Lifshitz theory to real materials, and calculation of dispersion interactions between arbitrarily shaped bodies. With regard to measurements, modern laboratory techniques, such as atomic force microscopes and micromachined oscillators, allow one to obtain experimental data with an error of about a fraction of one percent. The comparison of the experimental data obtained at room temperature with the Lifshitz theory revealed serious problems and gave rise to controversial approaches. Some of these approaches were found to be consistent with data within an accuracy of 1 2%, whereas some others were found to be excluded by the data at a high confidence level. In the calculation of dispersion interactions Figure 1 Figure 1. The number of citations received each year by the original paper by Casimir. between arbitrarily shaped bodies important progress has been made using the representation of the interaction energy in terms of functional determinants or in the equivalent T-matrix approach. These representations allow for a direct numerical computation of the forces for ideal metal and dielectric configurations at any fixed separation. The analytical asymptotic expansions at both large and short separations can also be obtained. The latter, for the first time, demonstrated an analytic correction beyond the

  14. Behavior of forced asymmetric oscillators at resonance

    Directory of Open Access Journals (Sweden)

    C. Fabry

    2000-12-01

    Full Text Available This article collects recent results concerning the behavior at resonance of forced oscillators driven by an asymmetric restoring force, with or without damping. This synthesis emphasizes the key role played by a function denoted by $Phi_{alpha,eta,p}$, which is, up to a sign reversal of its argument, a correlation product of the forcing term $p$ and of a function representing a free oscillation for theundamped equation. The theoretical results are accompanied by graphical representations illustrating the behavior of the damped and undamped oscillators. In particular, the damped oscillator is considered, with a forcing term whose frequency is close to the frequency of the free oscillations. For that problem, frequency-response curves are studied, both theoretically and through numerical computations, revealing a hysteresis phenomenon, when $Phi_{alpha,eta,p}$ is of constant sign.

  15. Developing Adaptive Proficiency in Special Forces Officers

    National Research Council Canada - National Science Library

    White, Susan S; Mueller-Hanson, Rose A; Dorsey, David W; Pulakos, Elaine D; Wisecarver, Michelle M; Deagle, Edwin A., III; Mendini, Kip G

    2005-01-01

    Adaptive proficiency is critical for operating in the dynamic Special Forces (SF) mission environment and a recent focus on this requirement has resulted in a greater emphasis on adaptability in current training for SF...

  16. Lateral force transmission between human tendon fascicles

    DEFF Research Database (Denmark)

    Haraldsson, Bjarki T; Aagaard, Per; Qvortrup, Klaus

    2008-01-01

    Whether adjacent collagen fascicles transmit force in parallel is unknown. The purpose of the present study was to examine the magnitude of lateral force transmission between adjacent collagen fascicles from the human patellar and Achilles tendon. From each sample two adjacent strands of fascicles...... in the patellar and Achilles tendon fascicles, respectively. A decline in stiffness of 39% and 60% from cycle 1 to cycle 2, and of 93% and 100% from cycle 2 to cycle 3 was observed in the patellar and Achilles tendon fascicles, respectively. The present data demonstrate that lateral force transmission between...... adjacent collagen fascicles in human tendons is small or negligible, suggesting that tendon fascicles largely act as independent structures and that force transmission principally takes place within the individual fascicles....

  17. Experimental studies of the magnetized friction force

    International Nuclear Information System (INIS)

    Fedotov, A. V.; Litvinenko, V. N.; Gaalnander, B.; Lofnes, T.; Ziemann, V.; Sidorin, A.; Smirnov, A.

    2006-01-01

    High-energy electron cooling, presently considered as an essential tool for several applications in high-energy and nuclear physics, requires an accurate description of the friction force which ions experience by passing through an electron beam. Present low-energy electron coolers can be used for a detailed study of the friction force. In addition, parameters of a low-energy cooler can be chosen in a manner to reproduce regimes expected in future high-energy operation. Here, we report a set of dedicated experiments in CELSIUS aimed at a detailed study of the magnetized friction force. Some results of the accurate comparison of experimental data with the friction force formulas are presented

  18. Nietzsche et les paradoxes de la force

    Directory of Open Access Journals (Sweden)

    Arnaud François

    2011-06-01

    Full Text Available According to this paper, the Nietzschean notion of force actually consists of a number of paradoxes, which I seek to formulate through the philosophical problems they pose. These paradoxes revolve around this fundamental paradox: on the one hand, force is able to rise and fall, but precisely how could such an increase and such a decrease be designed, as far as only what is given once for all can accept quantitative determinations? I come to draw two methods to answer this question (contrariety between two positive forces, reactivity of one force against the other, which suggest two ways of posing the biological and medical problems today, related to the notions of health and disease, in the scope of which Nietzsche has encountered it.

  19. Ground reaction forces during the power clean.

    Science.gov (United States)

    Souza, Aaron L; Shimada, Sean D; Koontz, Alicia

    2002-08-01

    Identifying and understanding the key biomechanical factors that exemplify the power clean can provide athletes the proper tools needed to prevail at a competitive event. Therefore, the purpose of this study was to characterize and describe ground reaction forces (Fz) during the power clean lift. Three 60-Hz motion-detecting cameras and an AMTI force plate were used to collect data from 10 collegiate weightlifting men who performed a power clean at 60 and 70% of their last competitive maximum clean. The results revealed that a greater peak force (Fz) was produced during the second pull compared with the first pull and unweighted phases in both percentage lifts. As the system weight increased from 60 to 70%, the peak force (Fz) increased for the first pull and unweighted phases and decreased during the second pull phase. Learning the proper technique of the power clean may provide athletes the basic understanding needed to be competitive in a weightlifting or sporting event.

  20. Force Factor Modulation in Electro Dynamic Loudspeakers

    DEFF Research Database (Denmark)

    Risbo, Lars; Agerkvist, Finn T.; Tinggaard, Carsten

    2016-01-01

    The relationship between the non-linear phenomenon of ’reluctance force’ and the position dependency of the voice coil inductance was established in 1949 by Cunningham, who called it ’magnetic attraction force’. This paper revisits Cunningham’s analysis and expands it into a generalised form that...... on both experiments and simulations is presented along discussions of the impact of force factor modulation for various motor topologies. Finally, it is shown that the popular L2R2 coil impedance model does not correctly predict the force unless the new analysis is applied....... that includes the frequency dependency and applies to coils with non-inductive (lossy) blocked impedance. The paper also demonstrates that Cunningham’s force can be explained physically as a modulation of the force factor which again is directly linked to modulation of the flux of the coil. A verification based...

  1. Armed Forces Recreation Center-Orlando

    National Research Council Canada - National Science Library

    Young, Shelton

    1995-01-01

    The U.S. Army Community and Family Support Center manages the morale, welfare, and recreation program for the Army, and established the Armed Forces Recreation Center in Orlando, Florida (AFRC-Orlando...

  2. Establishing a Communications Officer Force Development Program

    National Research Council Canada - National Science Library

    Jenrette, Brian J

    2006-01-01

    ...: experience, skills, training, education, and performance feedback. However, the Air Force has not instituted the structure, supplied the resources, or mandated the governance to make the program a success...

  3. The Canadian Forces Recruitment/Attrition Model

    National Research Council Canada - National Science Library

    Wait, Tracey

    1998-01-01

    ...), as part of its mandate to provide analysis of potential impacts of trends and change on defense and defense related issues, has designed a prototype model of recruitment and attrition of the Canadian Forces (C F...

  4. Nanoindentation and atomic force microscopy measurements on ...

    Indian Academy of Sciences (India)

    Unknown

    CSEM Instruments) and an integrated optical (Nikon)/ atomic force microscope ... The results reported herein represent averages of the group. For each loading/ unloading cycle, the load was plotted against the dis- placement of the indenter.

  5. Force feature spaces for visualization and classification.

    Science.gov (United States)

    Veljkovic, Dragana; Robbins, Kay A

    2008-12-11

    Distance-preserving dimension reduction techniques can fail to separate elements of different classes when the neighborhood structure does not carry sufficient class information. We introduce a new visual technique, K-epsilon diagrams, to analyze dataset topological structure and to assess whether intra-class and inter-class neighborhoods can be distinguished.We propose a force feature space data transform that emphasizes similarities between same-class points and enhances class separability. We show that the force feature space transform combined with distance-preserving dimension reduction produces better visualizations than dimension reduction alone. When used for classification, force feature spaces improve performance of K-nearest neighbor classifiers. Furthermore, the quality of force feature space transformations can be assessed using K-epsilon diagrams.

  6. Active Magnetic Bearings – Magnetic Forces

    DEFF Research Database (Denmark)

    Kjølhede, Klaus

    2006-01-01

    Parameter identification procedures and model validation are major steps towards intelligent machines supported by active magnetic bearings (AMB). The ability of measuring the electromagnetic bearing forces, or deriving them from measuring the magnetic flux, strongly contributes to the model...... of the work is the characterization of magnetic forces by using two experimental different experimental approaches. Such approaches are investigated and described in details. A special test rig is designed where the 4 poles - AMB is able to generate forces up to 1900 N. The high precision characterization...... of the magnetic forces are led by using different experimental tests: (I) by using hall sensors mounted directly on the poles (precise measurements of the magnetic flux) and by an auxiliary system, composed of strain gages and flexible beams attached to the rotor; (II) by measuring the input current and bearing...

  7. Force production in the rugby union scrum.

    Science.gov (United States)

    Quarrie, K L; Wilson, B D

    2000-04-01

    In this study, we examined the relationship between anthropometric, strength and power characteristics of rugby forwards, their body position when scrummaging, and their ability to apply force when scrummaging. Force applied to an instrumented scrum machine was measured for 56 players, both individually and as scrum packs. Measurements of body position for individuals were made by digitizing videotape records of the trials. Forty players subsequently had their anthropometry assessed and completed several strength and power tests. Body mass, each component of somatotype, maximal anaerobic power developed on a cycle ergometer, and isokinetic knee extension strength correlated significantly with individual scrummaging force. A regression model (P scrum pack to develop technique and coordination as a unit to maximize scrummaging force.

  8. Effectively Managing the Air Force Enterprise Architecture

    National Research Council Canada - National Science Library

    Sharkey, Jamie P

    2005-01-01

    The Air Force is developing and implementing an enterprise architecture to meet the Clinger-Cohen Act's requirement that all federal agencies use an architecture to guide their information technology (IT) investments...

  9. Air Force Civilian Senior Leadership Development Challenges

    National Research Council Canada - National Science Library

    Webb, Billy P

    2008-01-01

    .... While Gen Jumper's sight picture recognizes the need to grow civilians for leadership positions, there is a more compelling reason for the Air Force to focus on civilian leadership development...

  10. Telerobotic Control Architecture Including Force-Reflection

    National Research Council Canada - National Science Library

    Murphy, Mark

    1998-01-01

    This report describes the implementation of a telerobotic control architecture to manipulate a standard six-degree-of-freedom robot via a unique seven-degree-of-freedom force-reflecting exoskeleton...

  11. Force Reflection Algorithms for Exoskeleton Controllers

    National Research Council Canada - National Science Library

    Bryfogle, Mark

    1991-01-01

    This research effort investigated the kinematics and dynamics of open chain, serial linkage mechanisms with specific emphasis placed upon the application of this linkage as a force reflecting exoskeleton mechanism...

  12. Strategic Airlift and the Objective Force Brigade

    National Research Council Canada - National Science Library

    Waters, Jeffrey J

    2003-01-01

    ... to support the Army goal of deployment anywhere in the world within 96 hours. Background information describing the Army Transformation Program will present a framework for understanding the crucial role of the Objective Force brigade...

  13. Second-order gravitational self-force

    International Nuclear Information System (INIS)

    Rosenthal, Eran

    2006-01-01

    We derive an expression for the second-order gravitational self-force that acts on a self-gravitating compact object moving in a curved background spacetime. First we develop a new method of derivation and apply it to the derivation of the first-order gravitational self-force. Here we find that our result conforms with the previously derived expression. Next we generalize our method and derive a new expression for the second-order gravitational self-force. This study also has a practical motivation: The data analysis for the planned gravitational wave detector LISA requires construction of waveform templates for the expected gravitational waves. Calculation of the two leading orders of the gravitational self-force will enable one to construct highly accurate waveform templates, which are needed for the data analysis of gravitational waves that are emitted from extreme mass-ratio binaries

  14. Computer-Controlled Force Generator, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — TDA Research, Inc. is developing a compact, low power, Next-Generation Exercise Device (NGRED) that can generate any force between 5 and 600 lbf. We use a closed...

  15. Forced Normalization: Antagonism Between Epilepsy and Psychosis.

    Science.gov (United States)

    Kawakami, Yasuhiko; Itoh, Yasuhiko

    2017-05-01

    The antagonism between epilepsy and psychosis has been discussed for a long time. Landolt coined the term "forced normalization" in the 1950s to describe psychotic episodes associated with the remission of seizures and disappearance of epileptiform activity on electroencephalograms in individuals with epilepsy. Since then, neurologists and psychiatrists have been intrigued by this phenomenon. However, although collaborative clinical studies and basic experimental researches have been performed, the mechanism of forced normalization remains unknown. In this review article, we present a historical overview of the concept of forced normalization, and discuss potential pathogenic mechanisms and clinical diagnosis. We also discuss the role of dopamine, which appears to be a key factor in the mechanism of forced normalization. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Critical Casimir forces and anomalous wetting

    Indian Academy of Sciences (India)

    range forces responsible for this exception. By using .... using an ϵ-expansion method. For periodic boundary conditions and ..... interface profile is obtained by subtracting the optical path without the interface from the optical path with the interface ...

  17. Forced Use Treatment of Chronic Hemiparesis

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2002-07-01

    Full Text Available Twelve children (age 1 to 8 years with chronic (>1 year hemiparesis were treated by forced use, or constraint-induced, movement therapy at Tulane University School of Medicine, New Orleans, LA.

  18. Mental health challenges of LGBT forced migrants

    Directory of Open Access Journals (Sweden)

    Ariel Shidlo

    2013-04-01

    Full Text Available Many LGBT forced migrants have significant and sometimesincapacitating psychological scars. Mental health providers can assistin documenting the psychological impact of anti-LGBT persecutionand its impact on the ability to secure refugee status.

  19. Employment: Labor Force Status (1983-2012)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — Civilian labor force data consists of the number of employed persons, the number of unemployed persons, an unemployment rate and the total count of both employed and...

  20. Configurational forces and couples for crack propagation

    Directory of Open Access Journals (Sweden)

    Jarić Jovo P.

    2002-01-01

    Full Text Available Following the approach of Gurtin and Podio-Guidugli (1998, the problem of crack propagation based on the notion of configurational forces and couples in micropolar continua is considered. .

  1. Coherent Bichromatic Force Deflection of Molecules

    Science.gov (United States)

    Kozyryev, Ivan; Baum, Louis; Aldridge, Leland; Yu, Phelan; Eyler, Edward E.; Doyle, John M.

    2018-02-01

    We demonstrate the effect of the coherent optical bichromatic force on a molecule, the polar free radical strontium monohydroxide (SrOH). A dual-frequency retroreflected laser beam addressing the X˜2Σ+↔A˜2Π1 /2 electronic transition coherently imparts momentum onto a cryogenic beam of SrOH. This directional photon exchange creates a bichromatic force that transversely deflects the molecules. By adjusting the relative phase between the forward and counterpropagating laser beams we reverse the direction of the applied force. A momentum transfer of 70 ℏk is achieved with minimal loss of molecules to dark states. Modeling of the bichromatic force is performed via direct numerical solution of the time-dependent density matrix and is compared with experimental observations. Our results open the door to further coherent manipulation of molecular motion, including the efficient optical deceleration of diatomic and polyatomic molecules with complex level structures.

  2. The Multinational Logistics Joint Task Force (MLJTF)

    National Research Council Canada - National Science Library

    Higginbotham, Matthew T

    2007-01-01

    In this monograph, by analyzing the UN, NATO and the US Army's evolving Modular Logistics Doctrine, the author integrates the key areas from each doctrine into a multinational logistics joint task force (MLJTF) organization...

  3. Computer-Controlled Force Generator Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TDA Research, Inc. is developing a compact, low power, Next-Generation Exercise Device (NGRED) that can generate any force between 5 and 600 lbf. We use a closed...

  4. The Cytoskeleton and Force Response Mechanisms

    Science.gov (United States)

    Allen, Philip Goodwin

    2003-01-01

    The long term aim of this project was to define the mechanisms by which cells sense and respond to the physical forces experienced at 1g and missing in microgravity. Identification and characterization of the elements of the cells force response mechanism could provide pathways and molecules to serve as targets for pharmacological intervention to mitigate the pathologic effects of microgravity. Mechanical forces experienced by the organism can be transmitted to cells through molecules that allow cells to bind to the extracellular matrix and through other types of molecules which bind cells to each other. These molecules are coupled in large complexes of proteins to structural elements such as the actin cytoskeleton that give the cell the ability to sense, resist and respond to force. Application of small forces to tissue culture cells causes local elevation of intracellular calcium through stretch activated ion channels, increased tyrosine phosphorylation and a restructuring of the actin cytoskeleton. Using collagen coated iron oxide beads and strong magnets, we can apply different levels of force to cells in culture. We have found that force application causes the cells to polymerize actin at the site of mechanical deformation and unexpectedly, to depolymerize actin across the rest of the cell. Observations of GFP- actin expressing cells demonstrate that actin accumulates at the site of deformation within the first five minutes of force application and is maintained for many tens of minutes after force is removed. Consistent with the reinforcement of the cytoskeletal structures underlying the integrin-bead interaction, force also alters the motion of bound magnetic beads. This effect is seen following the removal of the magnetic field, and is only partially ablated by actin disruption with cytochalsin B. While actin is polymerizing locally at the site of force application, force also stimulates a global reduction in actin filament content within the cells. We have

  5. Casimir force experiments with quartz tuning forks and an atomic force microscope (AFM)

    International Nuclear Information System (INIS)

    Ludwig, T

    2008-01-01

    The aim of the measurement series is to study the Casimir force, specifically the effects of different materials and geometries. The art of measuring sub-nano Newton forces has been engineered to a great extent in the material sciences, especially for the atomic force microscope. In today's scanning microscope technologies there are several common methods used to measure sub-nano Newton forces. While the commercial atomic force microscopes (AFM) mostly work with soft silicon cantilevers, there are a large number of reports from university groups on the use of quartz tuning forks to get high resolution AFM pictures, to measure shear forces or to create new force sensors. The quartz tuning fork based force sensor has a number of advantages over the silicon cantilever, but also has some disadvantages. In this report the method based on quartz tuning forks is described with respect to their usability for Casimir force measurements and compared with other successful techniques. Furthermore, a design for Casimir force measurements that was set up in Berlin will be described and practical experimental aspects will be discussed. A status report on the Casimir experiments in Berlin will be given, including the experimental setup. In order to study the details of the Casimir effect the apparatus and active surfaces have to be improved further. The surfaces have to be flatter and cleaner. For better resolution, cantilevers and tuning forks with a low spring constant have to be employed

  6. Force Sensor for Large Robot Arms

    Science.gov (United States)

    Bejczy, A. K.; Primus, H. C.; Scheinman, V. D.

    1985-01-01

    Modified Maltese-cross force sensor larger and more sensitive than earlier designs. Measures inertial forces and torques exerted on large robot arms during free movement as well as those exerted by claw on manipulated objects. Large central hole of sensor allows claw drive mounted inside arm instead of perpendicular to its axis, eliminating potentially hazardous projection. Originally developed for Space Shuttle, sensor finds applications in large industrial robots.

  7. Gravitational Force and the Cardiovascular System

    Science.gov (United States)

    Pendergast, D. R.; Olszowka, A. J.; Rokitka, M. A.; Farhi, L. E.

    1991-01-01

    Cardiovascular responses to changes in gravitational force are considered. Man is ideally suited to his 1-g environment. Although cardiovascular adjustments are required to accommodate to postural changes and exercise, these are fully accomplished for short periods (min). More challenging stresses are those of short-term microgravity (h) and long-term microgravity (days) and of gravitational forces greater than that of Earth. The latter can be simulated in the laboratory and quantitative studies can be conducted.

  8. Enhancing Army Joint Force Headquarters Capabilities

    Science.gov (United States)

    2010-01-01

    insights, advice, and support. We also would like to thank Colonel James Dickens , Army Forces Command, and Lieutenant Colonel Ted Crisco, Combined Arms... Dickens (2004a, 2004b). 17 An important point is that the individual ground and air commanders change over time (because of duty shifts or...Division G3, 1st Cavalry Division, “Task Force Baghdad: Operation Iraq Freedom II,” undated briefing. Arnas, Neyla, Charles Barry, and Robert B. Oakley

  9. Regionally Aligned Forces: Concept Viability and Implementation

    Science.gov (United States)

    2015-03-01

    Healey and John A. Bonin, Ph.D. RAF and SOF Integration 97 Colonel Scott W. Kelly and Colonel Chad A. Mcgougan RAF and ARFORGEN 110 Colonel Robert...Washington, DC: U.S. Department of the Army, September 04, 2012, p. 2. 4 Kimberly Field, James Learmont and Jason Charland, “Regionally Aligned Forces...October 25, 2013. Field, Kimberly, Learmont, James and Charland, Jason , “Regionally Aligned Forces; Business Not as Usual,” Parameters Vol. 43, No

  10. Sample preparation method for scanning force microscopy

    CERN Document Server

    Jankov, I R; Szente, R N; Carreno, M N P; Swart, J W; Landers, R

    2001-01-01

    We present a method of sample preparation for studies of ion implantation on metal surfaces. The method, employing a mechanical mask, is specially adapted for samples analysed by Scanning Force Microscopy. It was successfully tested on polycrystalline copper substrates implanted with phosphorus ions at an acceleration voltage of 39 keV. The changes of the electrical properties of the surface were measured by Kelvin Probe Force Microscopy and the surface composition was analysed by Auger Electron Spectroscopy.

  11. Consolidating Air Force Maintenance Occupational Specialties

    Science.gov (United States)

    2016-01-01

    these questions, the impact of AFS consolidation on active duty KC-135 maintenance personnel at MacDill, McConnell , and Fairchild Air Force Bases...readiness? The analysis presented here considers the impact of AFS consolidation on active-duty KC- 135 maintenance personnel at MacDill, McConnell ... Concept for Air Force Maintenance: Conclusions from Analysis of C-130, F-16, and KC-135 Fleets, Santa Monica, Calif.: RAND Corporation, MG-919-AF, 2010

  12. Air Force Materiel Command Reorganization Analysis

    Science.gov (United States)

    2012-01-01

    Assistant Secretary of the Air Force for Acquisition (SAF/AQ); Blaise Durante , Deputy Assistant Secretary of the Air Force for Acquisi- xviii Air...Maj Gen (ret.) Richard Goddard, Maj Gen (ret.) Kevin Sullivan, Maj Gen (ret.) Ron Smith, Robert Conner, and George Falldine. We extend special...Michael Zettler Maj Gen (ret.) Pat Condon Maj Gen (ret.) Richard Goddard Maj Gen (ret.) Kevin Sullivan Maj Gen (ret.) Ron Smith Robert Conner George

  13. Moving the Force: Desert Storm and Beyond

    Science.gov (United States)

    1994-12-01

    Desert Shield~ Desert Storm, we could have met our airlift deployment requirements 20 to 35 percent faster. ~° Similar analyses of the Somalian Restore...DATE DEC 1994 2. REPORT TYPE 3. DATES COVERED - 4. TITLE AND SUBTITLE Moving The Force: Desert Storm and Beyond 5a. CONTRACT NUMBER 5b...MOVING THE FORCE: Desert Storm and Beyond SCOTT W. CONRAD McNair Paper 32 December 1994 INSTITUTE FOR NATIONAL STRATEGIC STUDIES NATIONAL DEFENSE

  14. Natural convection with combined driving forces

    Science.gov (United States)

    Ostrach, S.

    1980-01-01

    The problem of free and natural convection with combined driving forces is considered in general and all possible configurations are identified. Dimensionless parameters are discussed in order to help categorize the various problems, and existing work is critically evaluated. Four distinct cases are considered for conventional convection and for the situation when the body force and the density gradient are parallel but opposed. Considerable emphasis is given to unstable convection in horizontal layers.

  15. Casimir forces from a loop integral formulation

    International Nuclear Information System (INIS)

    Babington, James

    2010-01-01

    We reformulate the Casimir force between bodies in non-trivial background media. The force may be written in terms of loop variables, the loop being a curve around the scattering sites. A natural path ordering of exponentials takes place when a particular representation of the scattering centres is given. The basic object to be evaluated is a reduced (or abbreviated) classical pseudo-action that can be operator valued, and can be obtained from a classical path integral description.

  16. Complex Light and Optical Forces X

    DEFF Research Database (Denmark)

    This year marked the 10th Anniversary Edition of the conference on Complex Light and Optical Forces that is part of Photonics West. We again had a record number of submissions, indicative of the rising visibility and stature of this conference. Indeed, Complex Light and Optical Forces is still...... the only yearly venue worldwide for presenting research on complex light. This year we did not find a need to organize joint sessions with other conferences at Photonics West....

  17. Axial forces in centrifugal compressor couplings

    Science.gov (United States)

    Ivanov, A. N.; Ivanov, N. M.; Yun, V. K.

    2017-08-01

    The article presents the results of the theoretical and experimental investigation of axial forces arising in the toothed and plate couplings of centrifugal compressor shaft lines. Additional loads on the thrust bearing are considered that can develop in the toothed couplings as a result of coupled rotors misalignment. Design relationships to evaluate the level of axial forces and recommendations for their reduction in the operating conditions are given.

  18. The Transformation of American Revolutionary Forces

    Science.gov (United States)

    2017-05-25

    become the first and only official American regulations of the eighteenth century , Regulations for the Order and Discipline of the Troops of the United...The Transformation of American Revolutionary Forces A Monograph by MAJ Grant A. Brown British Army School of Advanced Military Studies United...DATES COVERED (From - To) JUN 2016 – MAY 2017 4. TITLE AND SUBTITLE The Transformation of American Revolutionary Forces 5a. CONTRACT NUMBER 5b

  19. Hip joint contact forces calculated using different muscle optimization techniques

    NARCIS (Netherlands)

    Wesseling, M.; Derikx, L.C.; de Groote, F.; Bartels, W.; Meyer, C.; Verdonschot, Nicolaas Jacobus Joseph; Jonkers, I.

    2013-01-01

    The goal of this study was to calculate muscle forces using different optimization techniques and investigate their effect on hip joint contact forces in gait and sit to stand. These contact forces were compared to measured hip contact forces [3]. The results showed that contact forces were

  20. Large General Purpose Frame for Studying Force Vectors

    Science.gov (United States)

    Heid, Christy; Rampolla, Donald

    2011-01-01

    Many illustrations and problems on the vector nature of forces have weights and forces in a vertical plane. One of the common devices for studying the vector nature of forces is a horizontal "force table," in which forces are produced by weights hanging vertically and transmitted to cords in a horizontal plane. Because some students have…

  1. Forces due to surface water measured by force microscopy. Consequences for anchoring biological cells to surfaces

    International Nuclear Information System (INIS)

    Schilcher, K.

    1997-05-01

    Interaction forces in 'Scanning Force Microscopy' (SFM). Force curves revealed exponentially decaying, attractive forces between silicon tip and silicon sample in aqueous media. Replacing the silicon sample by a sheet of mica, the interaction forces had both, an attractive and a repulsive component. Addition of salts generally reduced the forces. At 500 mM salt concentration, the attractive force became quantized with a residual force value of 23 pN. The attractive force is attributed to the gain in energy of water molecules which are released from surface water into free water during tip-sample approach. This conclusion is supported by a statistical model. The repulsive force contribution in the case of mica, is caused by hydration forces due to the spatial organization of crystalline water on the mica surface. Anchoring of biological cells. Molecular resolution of cell surfaces by SFM requires cell anchoring without interference with cell physiology. For this a novel strategy, 'hydrophobic anchoring' was designed. It avoids strong attractive forces between cell and by using a flexible spacer molecule. It establishes anchoring by a lipid (bound to the spacer), which weakly interacts with the hydrophobic core of the cell membrane. The method was subjected to tests using RBL-2H3, CH0 αβ and HEK-293 cells. The strength of cell anchoring was assayed by shear forces. In all cases 'hydrophobic anchoring' via a spacer caused elective anchoring much beyond controls. Such cell anchoring was employed for the imaging of RBL-2H3 cells by SFM. Images showed considerable finer details than images of loosely adsorbed cells. With about 50 rim resolution, SFM succeeded in imaging microvilli, filopodia, single cytoskeletal fibers (microtubules, microfilaments) and vesicles. In addition, as a consequence of cell stimulation upon ionomycin treatment, lamellae formation and the appearance of secretory granules on top of them were observed which indicates the viability of anchored

  2. A novel hydraulic force standard machine

    Science.gov (United States)

    McIlraith, A. H.; Clarkson, M. T.

    2002-12-01

    A hydraulic force standard machine covering the range 40 kN-1.5 MN has been designed, built and tested. Preliminary measurements indicate that this force standard can be self-calibrated to a relative standard uncertainty of 1 × 10-4 or better and is linear to 0.31 kN. The design of this force standard is suitable for much larger machines generating forces up to 20 MN. The special features of this machine include the use of controlled clearance for the limitation of oil flow, thus enabling the generation of high pressures and large forces, the use of journal bearings external to the high-pressure region to give high stiffness against side thrusts, and a method of calibration that involves determining the slope of the curve force versus pressure. This calibration procedure is essentially a null method that is largely independent of load cell properties such as hysteresis, creep, long-term drift and state of calibration, in contrast to current build-up calibration techniques that are strongly dependent on load cell properties.

  3. Chaos as an intermittently forced linear system.

    Science.gov (United States)

    Brunton, Steven L; Brunton, Bingni W; Proctor, Joshua L; Kaiser, Eurika; Kutz, J Nathan

    2017-05-30

    Understanding the interplay of order and disorder in chaos is a central challenge in modern quantitative science. Approximate linear representations of nonlinear dynamics have long been sought, driving considerable interest in Koopman theory. We present a universal, data-driven decomposition of chaos as an intermittently forced linear system. This work combines delay embedding and Koopman theory to decompose chaotic dynamics into a linear model in the leading delay coordinates with forcing by low-energy delay coordinates; this is called the Hankel alternative view of Koopman (HAVOK) analysis. This analysis is applied to the Lorenz system and real-world examples including Earth's magnetic field reversal and measles outbreaks. In each case, forcing statistics are non-Gaussian, with long tails corresponding to rare intermittent forcing that precedes switching and bursting phenomena. The forcing activity demarcates coherent phase space regions where the dynamics are approximately linear from those that are strongly nonlinear.The huge amount of data generated in fields like neuroscience or finance calls for effective strategies that mine data to reveal underlying dynamics. Here Brunton et al.develop a data-driven technique to analyze chaotic systems and predict their dynamics in terms of a forced linear model.

  4. A single magnetic nanocomposite cilia force sensor

    KAUST Repository

    Alfadhel, Ahmed

    2016-04-20

    The advancements in fields like robotics and medicine continuously require improvements of sensor devices and more engagement of cooperative sensing technologies. For example, instruments such as tweezers with sensitive force sensory heads could provide the ability to sense a variety of physical quantities in real time, such as the amount and direction of the force applied or the texture of the gripped object. Force sensors with such abilities could be great solutions toward the development of smart surgical tools. In this work, a unique force sensor that can be integrated at the tips of robotic arms or surgical tools is reported. The force sensor consists of a single bioinspired, permanent magnetic and highly elastic nanocomposite cilia integrated on a magnetic field sensing element. The nanocomposite is prepared from permanent magnetic nanowires incorporated into the highly elastic polydimethylsiloxane. We demonstrate the potential of this concept by performing several experiments to show the performance of the force sensor. The developed sensor element has a 200 μm in diameter single cilium with 1:5 aspect ratio and shows a detection range up to 1 mN with a sensitivity of 1.6 Ω/mN and a resolution of 31 μN. The simple fabrication process of the sensor allows easy optimization of the sensor performance to meet the needs of different applications.

  5. Resistive force theory for sand swimming

    Science.gov (United States)

    Ding, Yang; Maladen, Ryan; Li, Chen; Goldman, Daniel

    2009-11-01

    We discuss a resistive force theoryfootnotetextMaladen et. al, Science, 325, 314, 2009 that predicts the ratio of forward speed to wave speed (wave efficiency, η) of the sandfish lizard as it swims in granular media of varying volume fraction φ using a sinusoidal traveling wave body motion. In experiment η 0.5 independent of φ and is intermediate between η 0.2 for low Re Newtonian fluid undulatory swimmers like nematodes and η 0.9 for undulatory locomotion on a deformable surface. To predict η in granular media, we developed a resistive force model which balances thrust and drag force over the animal profile. We approximate the drag forces by measuring the force on a cylinder (a ``segment'' of the sandfish) oriented at different angles relative to the displacement direction. The model correctly predicts that η is independent of φ because the ratio of thrust to drag is independent of φ. The thrust component of the drag force is relatively larger in granular media than in low Re fluids, which explains why η in frictional granular media is greater than in viscous fluids.

  6. Does weightlifting increase residual force enhancement?

    Science.gov (United States)

    Siebert, Tobias; Kurch, David; Blickhan, Reinhard; Stutzig, Norman

    2016-07-05

    The force maintained following stretching of an active muscle exceeds the isometric force at the same muscle length. This residual force enhancement (RFE) is different for various muscles. It is currently unknown whether training induces changes in RFE. Weightlifters perform a large number of eccentric contractions during training, and RFE might be functionally relevant. The aim of this study was to examine whether there is increased RFE in weightlifters versus a reference group. Therefore, we measured external reaction forces during a multi-joint leg extension in weightlifters (n=10) and a reference group (n=11) using a motor driven leg press dynamometer (ISOMED 2000). Steady state isometric forces after stretching were compared to the corresponding forces obtained during isometric reference contractions. Statistical analyses yielded a significant RFE for both groups (pweightlifting group versus the reference group. We conclude that long-term weightlifting has only a minor influence on RFE. We speculate that the specific training including a combination of eccentric and concentric exercises induced almost no changes in titin-isoform expression which may be responsible for generation of RFE after active muscle stretching. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Forced flow cooling of ISABELLE dipole magnets

    International Nuclear Information System (INIS)

    Bamberger, J.A.; Aggus, J.; Brown, D.P.; Kassner, D.A.; Sondericker, J.H.; Strobridge, T.R.

    1976-01-01

    The superconducting magnets for ISABELLE will use a forced flow supercritical helium cooling system. In order to evaluate this cooling scheme, two individual dipole magnets were first tested in conventional dewars using pool boiling helium. These magnets were then modified for forced flow cooling and retested with the identical magnet coils. The first evaluation test used a l m-long ISA model dipole magnet whose pool boiling performance had been established. The same magnet was then retested with forced flow cooling, energizing it at various operating temperatures until quench occurred. The magnet performance with forced flow cooling was consistent with data from the previous pool boiling tests. The next step in the program was a full-scale ISABELLE dipole ring magnet, 4.25 m long, whose performance was first evaluated with pool boiling. For the forced flow test the magnet was shrunk-fit into an unsplit laminated core encased in a stainless steel cylinder. The high pressure gas is cooled below 4 K by a helium bath which is pumped below atmospheric pressure with an ejector nozzle. The performance of the full-scale dipole magnet in the new configuration with forced flow cooling, showed a 10 percent increase in the attainable maximum current as compared to the pool boiling data

  8. Unexpected properties of the centrifugal force

    International Nuclear Information System (INIS)

    Abramowicz, M.A.

    1990-01-01

    Contrary to what is stated in the Newtonian dynamics, rotation of a reference frame is not sufficient for the occurrence of the centrifugal force. Instead, the necessary and sufficient condition is a motion along a path different from that of a photon trajectory in space. This calls for a rather fundamental change in understanding of the very nature of the centrifugal force. It also has important practical physical consequences: in a strong gravitational field, where light trajectories are substantially curved, centrifugal force is much weaker than the Newtonian theory predicts. In addition, when there are closed (circular) photon trajectories in space, the centrifugal force may reverse its direction - it attracts towards the rotation axis. The weakening of the centrifugal force in strong gravitational fields and the reversal of its direction in the neighborhood of close photon trajectories in space fully and clearly explain puzzling examples of counter intuitive behaviour of dynamical effects of rotation found previously by several authors: e.g. reversal of the ellipticity behaviour of the relativistic Maclaurin spheroids (Chandrasekhar and Miller, 1974), reversal of the viscous torque action (Anderson and Lemos, 1988) or the fact that rotation increases internal pressure of a sufficiently compact star (Abramowicz and Wagoner, 1974). Weakening of the centrifugal force implies that rotating neutron stars are less oblate (and probably more stable) than the Newtonian theory predicts. This is important for the recently discussed question of how fast can pulsars spins. (author). 31 refs, 3 figs

  9. Unexpected properties of the centrifugal force

    International Nuclear Information System (INIS)

    Abramowicz, M.A.

    1990-01-01

    Contrary to what is stated in the Newtonian dynamics, rotation of a reference frame is not sufficient for the occurrence of the centrifugal force. Instead, the necessary and sufficient condition is a motion along a path different from that of a photon trajectory in space. This calls for a rather fundamental change in understanding of the very nature of the centrifugal force. It also has important practical physical consequences: in a strong gravitational field, where light trajectories are substantially curved, centrifugal force is much weaker than the Newtonian theory predicts. In addition, when there are closed (circular) photon trajectories in space, the centrifugal force may reverse its direction - it attracts towards the rotation axis!. The weakening of the centrifugal force in strong gravitational fields and the reversal of its direction in the neighbourhood of close photon trajectories in space fully and clearly explain puzzling examples of counter intuitive behaviour of dynamical effects of rotation found previously by several authors: e.g. reversal of the ellipticity behaviour of the relativistic Maclaurin spheroids (Chandrasekhar and Miller, 1974), reversal of the viscous torque action (Anderson and Lemos, 1988), or the fact that rotation increases internal pressure of a sufficiently compact star (Abramowicz and Wagoner, 1974). Weakening of the centrifugal force implies that rotating neutron stars are less oblate (and probably more stable) than the Newtonian theory predicts. This is important for the recently discussed question of how fast can pulsars spin. (author). 23 refs, 3 figs

  10. Theory for nonlinear dynamic force spectroscopy.

    Science.gov (United States)

    Björnham, Oscar; Andersson, Magnus

    2017-04-01

    Dynamic force spectroscopy (DFS) is an experimental technique that is commonly used to assess information on the strength, energy landscape, and lifetime of noncovalent bio-molecular interactions. DFS traditionally requires an applied force that increases linearly with time so that the bio-complex under investigation is exposed to a constant loading rate. However, tethers or polymers can modulate the applied force in a nonlinear manner. For example, bacterial adhesion pili and polymers with worm-like chain properties are structures that show nonlinear force responses. In these situations, the theory for traditional DFS cannot be readily applied. In this work, we expand the theory for DFS to also include nonlinear external forces while still maintaining compatibility with the linear DFS theory. To validate the theory, we modeled a bio-complex expressed on a stiff, an elastic, and a worm-like chain polymer, using Monte Carlo methods, and assessed the corresponding rupture force spectra. It was found that the nonlinear DFS (NLDFS) theory correctly predicted the numerical results. We also present a protocol suggesting an experimental approach and analysis method of the data to estimate the bond length and the thermal off-rate.

  11. Propulsive force asymmetry during tethered-swimming.

    Science.gov (United States)

    dos Santos, K B; Pereira, G; Papoti, M; Bento, P C B; Rodacki, A

    2013-07-01

    This study aimed to determine whether: i) tethe-red-swimming can be used to identify the asymmetry during front crawl swimming style; ii) swimmers that perform unilateral breathing present greater asymmetry in comparison to others that use bilateral breathing; iii) swimmers of best performance present smaller asymmetry than their counterparts; iv) repeated front crawl swimming movements influence body asymmetry. 18 swimmers were assessed for propulsive force parameters (peak force, mean force, impulse and rate of force development) during a maximal front crawl tethered-swimming test lasting 2 min. A factorial analysis showed that propulsive forces decreased at the beginning, intermediate and end of the test (pforce parameters (p>0.05). When performance was considered (below or above mean group time), a larger asymmetry was found in the sub-group of lower performance in comparison to those of best performance (pforces can be detected using tethered-swimming. The propulsive forces decreased during the test but asymmetries did not change under testing conditions. Although breathing preference did not influence asymmetry, swimmers with best performance were less asymmetric than their counterparts. © Georg Thieme Verlag KG Stuttgart · New York.

  12. Corticomuscular Coherence with Low-Level Forces

    Directory of Open Access Journals (Sweden)

    Chakarov V.

    2009-12-01

    Full Text Available The present study was aimed at investigating the corticomuscular synchronization in beta- (15-30 Hz and gamma-range (30-45 Hz during isometric compensation of low-level forces. It is still unknown to what extent the synchronization processes in these frequency ranges can coexist or influence each other when the static component only is modulated in a dynamic stimulation pattern. We investigated the corticomuscular coherence (CMC, as well as the cortical spectral power (SP during a visuomotor task, where 8%, 16% and 24% of the maximal voluntary contraction (MVC were used. Seven healthy right-handed female subjects compensated isometrically the different dynamic forces with their right index finger. EEG was recorded from 52 scalp positions and belly-tendon bipolar EMG from the first dorsal interosseus muscle (FDI. Under the three conditions investigated, the beta- and gamma-range CMC existed in parallel. They behaved in a different manner: while the beta-range coherence increased linearly during higher force application, the gamma-range CMC was not significantly modulated by the force levels. Our results suggest that although gamma-range CMC is functionally associated to the isometric compensation of dynamic forces, broad beta-range CMC can fulfill functions of motor control simultaneously different when low-level forces are applied.

  13. The poor man's scanning force microscope

    International Nuclear Information System (INIS)

    Guerra-Vela, Claudio; Zypman, Fredy R.

    2002-01-01

    The Macroscope (Zypman F R and Guerra-Vela C 2001 Eur. J. Phys. 22 17-30), an educational large-scale version of a scanning force microscope's cantilever-tip system, is used in the presence of nonlinear forces. This paper presents quantitative experimental evidence confirming the validity of the beam model (BM) (Eppel S J, Todd B A and Zypman F R 2000 Materials Issues and Modeling for Device Nanofabrication ed L Merhari et al (Pittsburgh, PA: Materials Research Society) pp 584, 189) as a proper reconstruction algorithm. As a teaching laboratory experiment, the force measurements are first done directly with a variety of dynamometer-like setups. Subsequently, the measurements are performed indirectly with the Macroscope from the cantilever resonant frequency shifts and the BM algorithm. Two central results of this work lie in its ability to compare forces obtained by traditional algorithms with known forces, and to illustrate in a hands-on fashion the principles behind the working of a scanning force microscope. (author)

  14. Laboratory experiments inform iceberg-calving forces

    Science.gov (United States)

    Cathles, L. M.; Burton, J. C.

    2013-12-01

    Globally detected glacial earthquakes are produced during cubic-kilometer scale calving events. The mechanism producing these earthquakes and the dependence of the seismic moment on iceberg size and glacial calving front geometry are not well established. We use a laboratory-scale model of the post-fracture calving process to measure aspects of the calving process not observable in nature. In our experiments, buoyant plastic blocks rest against against a force plate (glacial terminus) which measures both the total force and the torque exerted during the calving process. The blocks are gravitationally unstable, so that they will spontaneously capsize and rotate away from the terminus. We find that hydrodynamics are crucial when considering the coupling between the calving process and the solid earth. There is both a pushing contact force and a simultaneous pulling hydrodynamic force created by a reduced pressure along the terminus face. This suggests that a single couple force mechanism is a more appropriate mode for glacial earthquakes than the commonly used centroid single force model.

  15. Capillary force between wetted nanometric contacts and its application to atomic force microscopy.

    Science.gov (United States)

    Crassous, Jérôme; Ciccotti, Matteo; Charlaix, Elisabeth

    2011-04-05

    We extend to the case of perfect wetting the exact calculation of Orr et al. (J. Fluid. Mech. 1975, 67, 723) for a pendular ring connecting two dry surfaces. We derive an approximate analytical expression for the capillary force between two highly curved surfaces covered by a wetting liquid film. The domain of validity of this expression is assessed and extended by a custom-made numerical simulation based on the full exact mathematical description. In the case of attractive liquid-solid van der Waals interactions, the capillary force increases monotonically with decreasing vapor pressure up to several times its saturation value. This accurate description of the capillary force makes it possible to estimate the adhesion force between wet nanoparticles; it can also be used to quantitatively interpret pull-off forces measured by atomic force microscopy.

  16. Lateral force calibration in atomic force microscopy: A new lateral force calibration method and general guidelines for optimization

    International Nuclear Information System (INIS)

    Cannara, Rachel J.; Eglin, Michael; Carpick, Robert W.

    2006-01-01

    Proper force calibration is a critical step in atomic and lateral force microscopies (AFM/LFM). The recently published torsional Sader method [C. P. Green et al., Rev. Sci. Instrum. 75, 1988 (2004)] facilitates the calculation of torsional spring constants of rectangular AFM cantilevers by eliminating the need to obtain information or make assumptions regarding the cantilever's material properties and thickness, both of which are difficult to measure. Complete force calibration of the lateral signal in LFM requires measurement of the lateral signal deflection sensitivity as well. In this article, we introduce a complete lateral force calibration procedure that employs the torsional Sader method and does not require making contact between the tip and any sample. In this method, a colloidal sphere is attached to a 'test' cantilever of the same width, but different length and material as the 'target' cantilever of interest. The lateral signal sensitivity is calibrated by loading the colloidal sphere laterally against a vertical sidewall. The signal sensitivity for the target cantilever is then corrected for the tip length, total signal strength, and in-plane bending of the cantilevers. We discuss the advantages and disadvantages of this approach in comparison with the other established lateral force calibration techniques, and make a direct comparison with the 'wedge' calibration method. The methods agree to within 5%. The propagation of errors is explicitly considered for both methods and the sources of disagreement discussed. Finally, we show that the lateral signal sensitivity is substantially reduced when the laser spot is not centered on the detector

  17. TOTAL FORCE INTEGRATION: PROVIDING STABILITY FOR CITIZEN SOLDIERS IN AN EVER CHANGING AIR FORCE

    Science.gov (United States)

    2016-10-01

    Reserve Component.”91 While this is a step toward Total Force integration , there are certain limitations. One of the most significant disadvantages to...AU/ACSC/2016 AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY TOTAL FORCE INTEGRATION : PROVIDING STABILITY FOR CITIZEN SOLDIERS IN AN EVER...CHANGING AIR FORCE by Patricia M. Adams, Major, USAFR A Research Report Submitted to the Faculty In Partial Fulfillment of the Graduation

  18. Force sharing and other collaborative strategies in a dyadic force perception task.

    Science.gov (United States)

    Tatti, Fabio; Baud-Bovy, Gabriel

    2018-01-01

    When several persons perform a physical task jointly, such as transporting an object together, the interaction force that each person experiences is the sum of the forces applied by all other persons on the same object. Therefore, there is a fundamental ambiguity about the origin of the force that each person experiences. This study investigated the ability of a dyad (two persons) to identify the direction of a small force produced by a haptic device and applied to a jointly held object. In this particular task, the dyad might split the force produced by the haptic device (the external force) in an infinite number of ways, depending on how the two partners interacted physically. A major objective of this study was to understand how the two partners coordinated their action to perceive the direction of the third force that was applied to the jointly held object. This study included a condition where each participant responded independently and another one where the two participants had to agree upon a single negotiated response. The results showed a broad range of behaviors. In general, the external force was not split in a way that would maximize the joint performance. In fact, the external force was often split very unequally, leaving one person without information about the external force. However, the performance was better than expected in this case, which led to the discovery of an unanticipated strategy whereby the person who took all the force transmitted this information to the partner by moving the jointly held object. When the dyad could negotiate the response, we found that the participant with less force information tended to switch his or her response more often.

  19. Force Protection Common Operational Picture/Common Tactical Picture

    National Research Council Canada - National Science Library

    Peter, Russell

    1998-01-01

    ... has taken an integrated approach to Force Protection. There is a recognition that Force Protection is not a Security Police operation; but is a Security Force oDeration. This exemplifies a mindset change and a movement away from pure.

  20. Solar Force-free Magnetic Fields

    Directory of Open Access Journals (Sweden)

    Thomas Wiegelmann

    2012-09-01

    Full Text Available The structure and dynamics of the solar corona is dominated by the magnetic field. In most areas in the corona magnetic forces are so dominant that all non-magnetic forces like plasma pressure gradient and gravity can be neglected in the lowest order. This model assumption is called the force-free field assumption, as the Lorentz force vanishes. This can be obtained by either vanishing electric currents (leading to potential fields or the currents are co-aligned with the magnetic field lines. First we discuss a mathematically simpler approach that the magnetic field and currents are proportional with one global constant, the so-called linear force-free field approximation. In the generic case, however, the relation between magnetic fields and electric currents is nonlinear and analytic solutions have been only found for special cases, like 1D or 2D configurations. For constructing realistic nonlinear force-free coronal magnetic field models in 3D, sophisticated numerical computations are required and boundary conditions must be obtained from measurements of the magnetic field vector in the solar photosphere. This approach is currently of large interests, as accurate measurements of the photospheric field become available from ground-based (for example SOLIS and space-born (for example Hinode and SDO instruments. If we can obtain accurate force-free coronal magnetic field models we can calculate the free magnetic energy in the corona, a quantity which is important for the prediction of flares and coronal mass ejections. Knowledge of the 3D structure of magnetic field lines also help us to interpret other coronal observations, e.g., EUV images of the radiating coronal plasma.

  1. Unification of forces of different nature

    International Nuclear Information System (INIS)

    Sharafiddinov, R.S.

    2005-01-01

    Full text: Each of existing types of charges testifies in favor of the availability of a kind of the internal mass. Thereby such a mass-mass duality matter explained the coexistence of the united rest mass and charge which contain the electric, weak, strong and some other innate contributions. In conformity with these implications of a massive Dirac neutrino, elucidation of the ideals of each of all possible types of charges and masses could essentially be cleared up the nature of elementary particles. One of them says that the force of gravity of the Newton among two neutrinos and force of the Coulomb between themselves must be defined from point of view of any existing types of actions. Therefore, to establish the compound structure of matter at the fundamentals level one must use the fact that each of all possible types of forces includes in self both a kind of Newton and a kind of the Coulomb contributions. Of course, the united mass can contain the part that corresponds to the gravitational charge. Their existence implies the availability of the fifth force of the interaction between the particles. It comes forwards in the system as the harmony of four remaining forces. But it result has not yet been discovered in the measurements. Another possibility is to elucidate whether a particle gravitational mass and charge coincide with its all the mass and charge, if yes, what neutrino united mass and charge say about the unification of forces of a different nature. We investigate this question studying the ideas of each of earlier known and new properties of the neutrino which may serve as the source of naturally united gauge field. Findings allow to establish the ultimate structure of the micro world interaction elucidating the inter-ratio of intra neutrino forces and the nature of the inertial mass. Thereby they give new possibilities for solution of a range of other questions o f fundamental importance

  2. A Range-Balanced Force: An Alternate Force Structure Adapted to New Defense Priorities

    Science.gov (United States)

    2013-06-01

    forces will likely feature two aircraft types not currently contemplated in Air Force budgets—a medium-range unmanned combat aerial vehi- cle ( UCAV ...Dassault nEURon UCAV , scheduled to fly in 2012, doing what they think America’s cutting-edge Air Force is “supposed to do.” That pres- sure includes the OSD...long-legged, stealthy UCAV will cer- tainly cause policy analysts, budget-waste cutters, and Congress to ask why the Air Force isn’t buying the same

  3. Athermalization in atomic force microscope based force spectroscopy using matched microstructure coupling.

    Science.gov (United States)

    Torun, H; Finkler, O; Degertekin, F L

    2009-07-01

    The authors describe a method for athermalization in atomic force microscope (AFM) based force spectroscopy applications using microstructures that thermomechanically match the AFM probes. The method uses a setup where the AFM probe is coupled with the matched structure and the displacements of both structures are read out simultaneously. The matched structure displaces with the AFM probe as temperature changes, thus the force applied to the sample can be kept constant without the need for a separate feedback loop for thermal drift compensation, and the differential signal can be used to cancel the shift in zero-force level of the AFM.

  4. Digital force-feedback for protein unfolding experiments using atomic force microscopy

    International Nuclear Information System (INIS)

    Bippes, Christian A; Janovjak, Harald; Kedrov, Alexej; Muller, Daniel J

    2007-01-01

    Since its invention in the 1990s single-molecule force spectroscopy has been increasingly applied to study protein (un-)folding, cell adhesion, and ligand-receptor interactions. In most force spectroscopy studies, the cantilever of an atomic force microscope (AFM) is separated from a surface at a constant velocity, thus applying an increasing force to folded bio-molecules or bio-molecular bonds. Recently, Fernandez and co-workers introduced the so-called force-clamp technique. Single proteins were subjected to a defined constant force allowing their life times and life time distributions to be directly measured. Up to now, the force-clamping was performed by analogue PID controllers, which require complex additional hardware and might make it difficult to combine the force-feedback with other modes such as constant velocity. These points may be limiting the applicability and versatility of this technique. Here we present a simple, fast, and all-digital (software-based) PID controller that yields response times of a few milliseconds in combination with a commercial AFM. We demonstrate the performance of our feedback loop by force-clamp unfolding of single Ig27 domains of titin and the membrane proteins bacteriorhodopsin (BR) and the sodium/proton antiporter NhaA

  5. Minimizing tip-sample forces in jumping mode atomic force microscopy in liquid

    Energy Technology Data Exchange (ETDEWEB)

    Ortega-Esteban, A. [Departamento de Fisica de la Materia Condensada, C-3, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain); Horcas, I. [Nanotec Electronica S.L., Centro Empresarial Euronova 3, Ronda de Poniente 12, 28760 Tres Cantos, Madrid (Spain); Hernando-Perez, M. [Departamento de Fisica de la Materia Condensada, C-3, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain); Ares, P. [Nanotec Electronica S.L., Centro Empresarial Euronova 3, Ronda de Poniente 12, 28760 Tres Cantos, Madrid (Spain); Perez-Berna, A.J.; San Martin, C.; Carrascosa, J.L. [Centro Nacional de Biotecnologia (CNB-CSIC), Darwin 3, 28049 Madrid (Spain); Pablo, P.J. de [Departamento de Fisica de la Materia Condensada, C-3, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain); Gomez-Herrero, J., E-mail: julio.gomez@uam.es [Departamento de Fisica de la Materia Condensada, C-3, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain)

    2012-03-15

    Control and minimization of tip-sample interaction forces are imperative tasks to maximize the performance of atomic force microscopy. In particular, when imaging soft biological matter in liquids, the cantilever dragging force prevents identification of the tip-sample mechanical contact, resulting in deleterious interaction with the specimen. In this work we present an improved jumping mode procedure that allows detecting the tip-sample contact with high accuracy, thus minimizing the scanning forces ({approx}100 pN) during the approach cycles. To illustrate this method we report images of human adenovirus and T7 bacteriophage particles which are prone to uncontrolled modifications when using conventional jumping mode. -- Highlights: Black-Right-Pointing-Pointer Improvement in atomic force microscopy in buffer solution. Black-Right-Pointing-Pointer Peak force detection. Black-Right-Pointing-Pointer Subtracting the cantilever dragging force. Black-Right-Pointing-Pointer Forces in the 100 pN range. Black-Right-Pointing-Pointer Imaging of delicate viruses with atomic force microscopy.

  6. Transverse force on a vortex in lattice models of superfluids

    OpenAIRE

    Sonin, E. B.

    2013-01-01

    The paper derives the transverse forces (the Magnus and the Lorentz forces) in the lattice models of superfluids in the continuous approximation. The continuous approximation restores translational invariance absent in the original lattice model, but the theory is not Galilean invariant. As a result, calculation of the two transverse forces on the vortex, Magnus force and Lorentz force, requires the analysis of two balances, for the true momentum of particles in the lattice (Magnus force) and...

  7. Unsteady Aerodynamic Force Sensing from Measured Strain

    Science.gov (United States)

    Pak, Chan-Gi

    2016-01-01

    A simple approach for computing unsteady aerodynamic forces from simulated measured strain data is proposed in this study. First, the deflection and slope of the structure are computed from the unsteady strain using the two-step approach. Velocities and accelerations of the structure are computed using the autoregressive moving average model, on-line parameter estimator, low-pass filter, and a least-squares curve fitting method together with analytical derivatives with respect to time. Finally, aerodynamic forces over the wing are computed using modal aerodynamic influence coefficient matrices, a rational function approximation, and a time-marching algorithm. A cantilevered rectangular wing built and tested at the NASA Langley Research Center (Hampton, Virginia, USA) in 1959 is used to validate the simple approach. Unsteady aerodynamic forces as well as wing deflections, velocities, accelerations, and strains are computed using the CFL3D computational fluid dynamics (CFD) code and an MSC/NASTRAN code (MSC Software Corporation, Newport Beach, California, USA), and these CFL3D-based results are assumed as measured quantities. Based on the measured strains, wing deflections, velocities, accelerations, and aerodynamic forces are computed using the proposed approach. These computed deflections, velocities, accelerations, and unsteady aerodynamic forces are compared with the CFL3D/NASTRAN-based results. In general, computed aerodynamic forces based on the lifting surface theory in subsonic speeds are in good agreement with the target aerodynamic forces generated using CFL3D code with the Euler equation. Excellent aeroelastic responses are obtained even with unsteady strain data under the signal to noise ratio of -9.8dB. The deflections, velocities, and accelerations at each sensor location are independent of structural and aerodynamic models. Therefore, the distributed strain data together with the current proposed approaches can be used as distributed deflection

  8. Calcite biomineralization in coccoliths: Evidence from atomic force microscopy (AFM)

    DEFF Research Database (Denmark)

    Henriksen, Karen; Stipp, S.L.S.

    2002-01-01

    geochemistry, crystal orientation, coccolith function, biomineralization, biological calcite, atomic force microscopy......geochemistry, crystal orientation, coccolith function, biomineralization, biological calcite, atomic force microscopy...

  9. Memory effect o force measurements at nanoscales

    International Nuclear Information System (INIS)

    Lisy, V.; Tothova, J.

    2011-01-01

    we have obtained an exact solution for the drift velocity of a Brownian particle in an incompressible fluid under the action of a constant force, taking into account the hydrodynamic memory in the particle motion. This velocity is proportional to the applied force but depends in a complicated manner on the time of observation t. At short times it is proportional to t and at long times it contains algebraic tails, the longest-lived of which being ∼ t -1/ 2. Due to this the velocity very slowly approaches the limiting value F/γ. As a consequence, the force F can significantly differ from the value that would be extracted from the drift measurements neglecting the inertial effects, which is a standard assumption in the interpretation of such experiments. The presented method can be equally applicable in the case of force linearly depending on the particle position. For nonlinear forces, first the open question about the choice of convention to be used in stochastic calculus should be resolved. (authors)

  10. Climate forcing from the transport sectors.

    Science.gov (United States)

    Fuglestvedt, Jan; Berntsen, Terje; Myhre, Gunnar; Rypdal, Kristin; Skeie, Ragnhild Bieltvedt

    2008-01-15

    Although the transport sector is responsible for a large and growing share of global emissions affecting climate, its overall contribution has not been quantified. We provide a comprehensive analysis of radiative forcing from the road transport, shipping, aviation, and rail subsectors, using both past- and forward-looking perspectives. We find that, since preindustrial times, transport has contributed approximately 15% and 31% of the total man-made CO2 and O3 forcing, respectively. A forward-looking perspective shows that the current emissions from transport are responsible for approximately 16% of the integrated net forcing over 100 years from all current man-made emissions. The dominating contributor to positive forcing (warming) is CO2, followed by tropospheric O3. By subsector, road transport is the largest contributor to warming. The transport sector also exerts cooling through reduced methane lifetime and atmospheric aerosol effects. Shipping causes net cooling, except on future time scales of several centuries. Much of the forcing from transport comes from emissions not covered by the Kyoto Protocol.

  11. Traction Forces exerted by crawling cells

    Science.gov (United States)

    Alonso-Latorre, Baldomero; Del Alamo, Juan C.; Rodriguez-Rodriguez, Javier; Aliseda, Alberto; Meili, Rudolph; Firtel, Richard; Lasheras, Juan C.

    2006-11-01

    We measure the forces exerted by Dictyostelium discoideum cells crawling over a deformable substrate from the displacements of fluorescent beads embedded in it. A particle tracking technique similar to PIV is used to obtain the displacements. From them, forces are computed by solving the elasto-static equation in a finite thickness slab. We will show that the finite thickness of the substrate and the distance of the beads to its surface affect substantially the results, although previous traction cytometry techniques neglected them. The measured forces are correlated to the different stages of the crawling cycle for various cell strains. It has been observed that a large fraction of the forces measured on the substrate are originated by the cell's internal tension through all the stages of motion, including the protrusion of pseudopods. This result suggests that the viscous drag exerted by the fluid in which the cells are immersed is very small compared to the forces applied by the cytoskeleton on the substrate.

  12. Hydrodynamic Forces from Steep Waves in Rivers

    International Nuclear Information System (INIS)

    Loevoll, A.

    1996-01-01

    The reservoir behind a hydroelectric power production dam has an enormous potential for destruction in case of a dam break. The present doctoral thesis evaluates the hydrodynamic forces from steep waves in rivers. In the laboratory, forces on a structure shaped as a vertical cylinder of rectangular cross section were measured, and the threshold condition for the bed sediment was investigated. A wave parameter α is introduced to describe the gradient of a wave front. The flow condition in the flume was reproduced by a 3-D numerical model. For various values of the wave parameter the forces were measured and compared to the drag force calculated from measured depth and velocity. From these comparisons the hydrodynamic force can be calculated as drag only, even in the case of a breaking wave front. The contribution from inertia relative to drag depends on the size of the structure. For larger structures the contributions may be important in steep waves. To study the initiation of motion (of sediments) under unsteady flow, waves of various parameter values were passed over a gravel covered bed. The initiation of motion starts before the peak of the wave, and is given by Shield's relation if the friction slope is applied. No dependence upon the wave gradient was found. A relation was established which gives the critical shear stress if the friction slope is estimated by the bottom slope. 65 refs., 41 figs., 10 tabs

  13. Piezoresistive Tactile Sensor Discriminating Multidirectional Forces

    Directory of Open Access Journals (Sweden)

    Youngdo Jung

    2015-10-01

    Full Text Available Flexible tactile sensors capable of detecting the magnitude and direction of the applied force together are of great interest for application in human-interactive robots, prosthetics, and bionic arms/feet. Human skin contains excellent tactile sensing elements, mechanoreceptors, which detect their assigned tactile stimuli and transduce them into electrical signals. The transduced signals are transmitted through separated nerve fibers to the central nerve system without complicated signal processing. Inspired by the function and organization of human skin, we present a piezoresistive type tactile sensor capable of discriminating the direction and magnitude of stimulations without further signal processing. Our tactile sensor is based on a flexible core and four sidewall structures of elastomer, where highly sensitive interlocking piezoresistive type sensing elements are embedded. We demonstrate the discriminating normal pressure and shear force simultaneously without interference between the applied forces. The developed sensor can detect down to 128 Pa in normal pressure and 0.08 N in shear force, respectively. The developed sensor can be applied in the prosthetic arms requiring the restoration of tactile sensation to discriminate the feeling of normal and shear force like human skin.

  14. Hydrodynamic Forces from Steep Waves in Rivers

    Energy Technology Data Exchange (ETDEWEB)

    Loevoll, A.

    1996-12-31

    The reservoir behind a hydroelectric power production dam has an enormous potential for destruction in case of a dam break. The present doctoral thesis evaluates the hydrodynamic forces from steep waves in rivers. In the laboratory, forces on a structure shaped as a vertical cylinder of rectangular cross section were measured, and the threshold condition for the bed sediment was investigated. A wave parameter {alpha} is introduced to describe the gradient of a wave front. The flow condition in the flume was reproduced by a 3-D numerical model. For various values of the wave parameter the forces were measured and compared to the drag force calculated from measured depth and velocity. From these comparisons the hydrodynamic force can be calculated as drag only, even in the case of a breaking wave front. The contribution from inertia relative to drag depends on the size of the structure. For larger structures the contributions may be important in steep waves. To study the initiation of motion (of sediments) under unsteady flow, waves of various parameter values were passed over a gravel covered bed. The initiation of motion starts before the peak of the wave, and is given by Shield`s relation if the friction slope is applied. No dependence upon the wave gradient was found. A relation was established which gives the critical shear stress if the friction slope is estimated by the bottom slope. 65 refs., 41 figs., 10 tabs.

  15. Debye Entropic Force and Modified Newtonian Dynamics

    International Nuclear Information System (INIS)

    Li Xin; Chang Zhe

    2011-01-01

    Verlinde has suggested that the gravity has an entropic origin, and a gravitational system could be regarded as a thermodynamical system. It is well-known that the equipartition law of energy is invalid at very low temperature. Therefore, entropic force should be modified while the temperature of the holographic screen is very low. It is shown that the modified entropic force is proportional to the square of the acceleration, while the temperature of the holographic screen is much lower than the Debye temperature T D . The modified entropic force returns to the Newton's law of gravitation while the temperature of the holographic screen is much higher than the Debye temperature. The modified entropic force is connected with modified Newtonian dynamics (MOND). The constant a 0 involved in MOND is linear in the Debye frequency ω D , which can be regarded as the largest frequency of the bits in screen. We find that there do have a strong connection between MOND and cosmology in the framework of Verlinde's entropic force, if the holographic screen is taken to be bound of the Universe. The Debye frequency is linear in the Hubble constant H 0 . (geophysics, astronomy, and astrophysics)

  16. The Air Force Culture and Cohesion: Building an Air and Space Force for the Twenty-First Century

    National Research Council Canada - National Science Library

    Smith, James

    1998-01-01

    THE US AIR FORCE has a cohesion problem. Dr. Donald B. Rice, former secretary of the Air Force, complained that officers identified with their weapon systems, not with the Air Force or any concept of service mission or doctrine...

  17. Feasibility of novel four degrees of freedom capacitive force sensor for skin interface force

    Directory of Open Access Journals (Sweden)

    Murakami Chisato

    2012-11-01

    Full Text Available Abstract Background The objective of our study was to develop a novel capacitive force sensor that enables simultaneous measurements of yaw torque around the pressure axis and normal force and shear forces at a single point for the purpose of elucidating pressure ulcer pathogenesis and establishing criteria for selection of cushions and mattresses. Methods Two newly developed sensors (approximately 10 mm×10 mm×5 mm (10 and 20 mm×20 mm×5 mm (20 were constructed from silicone gel and four upper and lower electrodes. The upper and lower electrodes had sixteen combinations that had the function as capacitors of parallel plate type. The full scale (FS ranges of force/torque were defined as 0–1.5 N, –0.5-0.5 N and −1.5-1.5 N mm (10 and 0–8.7 N, –2.9-2.9 N and −16.8-16.8 N mm (20 in normal force, shear forces and yaw torque, respectively. The capacitances of sixteen capacitors were measured by an LCR meter (AC1V, 100 kHz when displacements corresponding to four degrees of freedom (DOF forces within FS ranges were applied to the sensor. The measurement was repeated three times in each displacement condition (10 only. Force/torque were calculated by corrected capacitance and were evaluated by comparison to theoretical values and standard normal force measured by an universal tester. Results In measurements of capacitance, the coefficient of variation was 3.23% (10. The Maximum FS errors of estimated force/torque were less than or equal to 10.1 (10 and 16.4% (20, respectively. The standard normal forces were approximately 1.5 (10 and 9.4 N (20 when pressure displacements were 3 (10 and 2 mm (20, respectively. The estimated normal forces were approximately 1.5 (10 and 8.6 N (10 in the same condition. Conclusions In this study, we developed a new four DOF force sensor for measurement of force/torque that occur between the skin and a mattress. In measurement of capacitance, the repeatability was good and it was confirmed that the sensor had

  18. Intersegmental kinetics significantly impact mapping from finger musculotendon forces to fingertip forces.

    Science.gov (United States)

    Qiu, Dan; Lee, Sang Wook; Amine, Mukarram; Kamper, Derek G

    2017-12-08

    Predicting the fingertip force vector resulting from excitation of a given muscle remains a challenging but essential task in finger biomechanical modeling. While the conversion of musculotendon force to fingertip force can significantly be affected by finger posture, current techniques utilizing geometric moment arms may not capture such complex postural effects. Here, we attempted to elucidate the postural effects on the mapping between musculotendon force and fingertip force through in vitro experiments. Computer-controlled tendon loading was implemented on the 7 index finger musculotendons of 5 fresh-frozen cadaveric hands across different postures. The resulting fingertip forces/moments were used to compute the effective static moment arm (ESMA), relating tendon force to joint torque, at each joint. The ESMAs were subsequently modeled in three different manners: independent of joint angle; dependent only upon the corresponding joint angle; or dependent upon all joint angles. We found that, for the reconstruction of the fingertip force vector, the multi-joint ESMA model yielded the best outcome, both in terms of direction and magnitude of the vector (mean reconstruction error force transmission through a joint is affected by the posture of neighboring joints. Interestingly, the ESMA model that considers geometric changes of individual joints, the standard model used in biomechanical stimulations, often yielded worse reconstruction results than the simple constant-value ESMA model. Our results emphasize the importance of accurate description of the multi-joint dependency of the conversion of tendon force to joint moment for proper prediction of fingertip force direction. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Environmental Management Strategy: Four Forces Analysis

    Science.gov (United States)

    Doyle, Martin W.; Von Windheim, Jesko

    2015-01-01

    We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

  20. Tendon Force Transmission at the Nanoscale

    DEFF Research Database (Denmark)

    Svensson, René

    2013-01-01

    The subject of this study is connective tissues, in particular tendon. Connective tissues consist of an extracellular matrix made of the protein collagen, which is responsible for the mechanical integrity of the body. While connective tissues may appear simple, there are still many aspects...... of connective tissue function that are poorly understood. One such aspect is the microscopic mechanisms of force transmission through tendons over macroscopic distances. Force transmission is at the heart of tendon function, but the large range of scales in the hierarchical structure of tendons has made...... it difficult to tackle. The tendon hierarchy ranges from molecules (2 nm) over fibrils (200 nm), fibers (2 μm) and fascicles (200 μm) to tendons (10 mm), and to derive the mechanisms of force transmission it is necessary to know the mechanical behavior at each hierarchical level. The aim of the present work...

  1. Air Bag Momentum Force Including Aspiration

    Directory of Open Access Journals (Sweden)

    Guy Nusholtz

    1995-01-01

    Full Text Available A gas-jet momentum force drives the air bag into position during a crash. The magnitude of this force can change as a result of aspiration. To determine the potential magnitude of the effect on the momentum force and mass flow rate in an aspirated system, a series of experiments and simulations of those experiments was conducted. The simulation consists of a two-dimensional unsteady isentropic CFD model with special “infinite boundaries”. One of the difficulties in simulating the gas-jet behavior is determining the mass flow rate. To improve the reliability of the mass flow rate input to the simulation, a sampling procedure involving multiple tests was used, and an average of the tests was adopted.

  2. Hydrostatic homeostatic effects during changing force environments.

    Science.gov (United States)

    Wood, E H

    1990-04-01

    The G tolerance of internal organs depends on how closely force environments in body cavities mimic an aqueous system. Hydrostatic gradients in peritoneal and pericardial cavities sustain venous return and uniform transmyocardial pressures so that normotensive arterial pressures at heart level persist during initial (about 7 s) sudden sustained exposures to Gz acceleration followed by a compensatory baroreceptor-mediated hypertension. Further, cerebrospinal fluid hydrostatics-mediated negative intracranial pressures sustain cerebral perfusion and cognition in spite of Gz-produced zero or near zero systolic pressures at head level. Differences in the approximately 0 and 1.0 specific gravities of intra-alveolar gases and surrounding blood and tissues, respectively, render lung anatomy and functions highly susceptible to the force environment. Hydrostatic gradients in dependent regions, simultaneously with small gradients in superior regions, appear to be nature's method for decreasing force environment-mediated regional ventilation and perfusion inequalities within the thorax.

  3. Knitting Force Measurement on Flat Knitting Machines

    Directory of Open Access Journals (Sweden)

    A. Fouda

    2014-01-01

    Full Text Available Knittability can be defined as the ability of yarns to run on knitting machines without problems. Knittability can be achieved when less stress is applied on the knitting machine parts by the knitting yarns. This paper presents a novel measuring system for the knitting force needed to perform knitting yarns on flat knitting machine based on data acquisition system (DAS. The proposed system is used to measure the knitting force at different machine settings and different properties of the knitting yarns to determine the optimal production conditions. For this reason, three types of knitted fabric structures (single jersey, Rib 1 × 1, and full cardigan with three different loop lengths and five different twists of ply yarn were produced. The obtained results showed the optimal yarn ply twist factor (αe which gave minimum knitting force (less stress on needles or knitting yarns at different loop lengths for each structure.

  4. Trade Unions, Forced Labour and Human Trafficking

    Directory of Open Access Journals (Sweden)

    Michele Ford

    2015-09-01

    Full Text Available This article examines the dilemmas facing trade unions seeking to engage on questions of forced labour and human trafficking. The International Labour Organization and elements of the international trade union movement have succeeded in getting forced labour on the policy agenda globally and within many national settings. However, trade unions have limited capacity to effect real change in relation to these issues because of limitations on their influence, determined largely by membership density and the limited number of sectors in which they are present, but also internal assessments of what constitutes ‘core business’. As a consequence, while trade unions may advocate for legislative or policy change, partner with non-governmental organisations to deal with particular cases, or even engage directly with vulnerable populations, the integration of those populations into the day to day concerns of trade unions necessarily remains elusive—particularly in the global south, where forced labour is most prevalent.

  5. Limits on new forces coexisting with electromagnetism

    International Nuclear Information System (INIS)

    Kloor, H.; Fischbach, E.; Talmadge, C.; Greene, G.L.

    1994-01-01

    We consider the limits arising from different electromagnetic systems on the existence of a possible new electromagnetic analogue of the fifth force. Although such a force may have no intrinsic connection to electromagnetism (or gravity), its effects could be manifested through various anomalies in electromagnetic systems, for appropriate values of the coupling strength and range. Our work generalizes that of Bartlett and Loegl (who considered the case of a massive vector field coexisting with massless electrodynamics) to encompass a broad class of phenomenological interactions mediated by both scalar and vector exchanges. By combining data from both gravitational and electromagnetic systems, one can eventually set limits on a new force whose range λ extends from the subatomic scale (λ∼10 -15 m) to the astrophysical scale (λ∼10 12 m)

  6. Recent Progress with the KWISP Force Sensor

    CERN Document Server

    Cantatore, G; Hoffmann, D.H.H.; Karuza, M.; Semertzidis, Y.K.; Zioutas, K.

    2015-01-01

    The KWISP opto-mechanical force sensor has been built and calibrated in the INFN Trieste optics laboratory and is now under off-beam commissioning at CAST. It is designed to detect the pressure exerted by a flux of solar Chameleons on a thin (100 nm) Si$_3$N$_4$ micromembrane thanks to their direct coupling to matter. A thermally-limited force sensitivity of $1.5 \\cdot 10^{-14}~\\mbox{N}/\\sqrt{\\mbox{Hz}}$, corresponding to $7.5 \\cdot 10^{-16}~\\mbox{m}/\\sqrt{\\mbox{Hz}}$ in terms of displacement, has been obtained. An originally developed prototype chameleon chopper has been used in combination with the KWISP force sensor to conduct preliminary searches for solar chamaleons.

  7. New gravitational forces from quantum theory

    International Nuclear Information System (INIS)

    Nieto, M.M.; Goldman, T.; Hughes, R.J.

    1988-01-01

    When a classical theory is quantized, new physical effects result. The prototypical example is the Lamb Shift of quantum electrodynamics. Even though this phenomenon could be parametrized by the ''Uehling Potential,'' it was always realized that it was a quantum aspect of electromagnetism, not a ''new force'' of nature. So, too, with theories of quantum gravity. Generically they predict that there will be spin-1 (graviphoton) and spin-0 (graviscalar) partners of the spin-2 graviton. At some level, these partners will generate new effects. Among them are (1) non-Newtonian gravitational forces and (2) substance dependance (violation of the Principle of Equivalence). We discuss these ideas in the context of recent experiments. (Experiments usually test only one of the above effects, which could be distinct.) We contrast these ideas with the alternative point of view, that there actually may be a ''fifth force'' of nature. 20 refs

  8. Interdisciplinary Perspectives on Special Operations Forces

    DEFF Research Database (Denmark)

    is the result of a research projec tproviding international interdisciplinary perspectives on special operations forces, based on three main themes: - Leading and organizing for strategic effect - Professional entrepreneurship and self-perceptions in special operations forces - Political and popular perceptions......Special operations forces have been characterized as uniquely suited to match the current security environment of increasingly diverse complex, and dynamic threats. With the Danish Defense Agreement of 2014, Denmark joined the ranks of some of its closest allies and established a Special Operations...... Command to oversee the development and deployment of Danish special operations. Yet, how exactly should Western special operations develop to stay abreast with evolving threats and which possibilities and challenges come with the establishment of dedicated special operations commands? This anthology...

  9. Constant force extensional rheometry of polymer solutions

    DEFF Research Database (Denmark)

    Szabo, Peter; McKinley, Gareth H.; Clasen, Christian

    2012-01-01

    We revisit the rapid stretching of a liquid filament under the action of a constant imposed tensile force, a problem which was first considered by Matta and Tytus [J. Non-Newton. Fluid Mech. 35 (1990) 215–229]. A liquid bridge formed from a viscous Newtonian fluid or from a dilute polymer solution...... is first established between two cylindrical disks. The upper disk is held fixed and may be connected to a force transducer while the lower cylinder falls due to gravity. By varying the mass of the falling cylinder and measuring its resulting acceleration, the viscoelastic nature of the elongating fluid...... filament can be probed. In particular, we show that with this constant force pull (CFP) technique it is possible to readily impose very large material strains and strain rates so that the maximum extensibility of the polymer molecules may be quantified. This unique characteristic of the experiment...

  10. Forces between permanent magnets: experiments and model

    International Nuclear Information System (INIS)

    González, Manuel I

    2017-01-01

    This work describes a very simple, low-cost experimental setup designed for measuring the force between permanent magnets. The experiment consists of placing one of the magnets on a balance, attaching the other magnet to a vertical height gauge, aligning carefully both magnets and measuring the load on the balance as a function of the gauge reading. A theoretical model is proposed to compute the force, assuming uniform magnetisation and based on laws and techniques accessible to undergraduate students. A comparison between the model and the experimental results is made, and good agreement is found at all distances investigated. In particular, it is also found that the force behaves as r −4 at large distances, as expected. (paper)

  11. Greenhouse Effect, Radiative Forcing and Climate Sensitivity

    Science.gov (United States)

    Ponater, Michael; Dietmüller, Simone; Sausen, Robert

    Temperature conditions and climate on Earth are controlled by the balance between absorbed solar radiation and outgoing terrestrial radiation. The greenhouse effect is a synonym for the trapping of infrared radiation by radiatively active atmospheric constituents. It generally causes a warming of the planet's surface, compared to the case without atmosphere. Perturbing the radiation balance of the planet, e.g., by anthropogenic greenhouse gas emissions, induces climate change. Individual contributions to a total climate impact are usually quantified and ranked in terms of their respective radiative forcing. This method involves some limitations, because the effect of the external forcing is modified by radiative feedbacks. Here the current concept of radiative forcing and potential improvements are explained.

  12. Forces between permanent magnets: experiments and model

    Science.gov (United States)

    González, Manuel I.

    2017-03-01

    This work describes a very simple, low-cost experimental setup designed for measuring the force between permanent magnets. The experiment consists of placing one of the magnets on a balance, attaching the other magnet to a vertical height gauge, aligning carefully both magnets and measuring the load on the balance as a function of the gauge reading. A theoretical model is proposed to compute the force, assuming uniform magnetisation and based on laws and techniques accessible to undergraduate students. A comparison between the model and the experimental results is made, and good agreement is found at all distances investigated. In particular, it is also found that the force behaves as r -4 at large distances, as expected.

  13. Irrigation as an Historical Climate Forcing

    Science.gov (United States)

    Cook, Benjamin I.; Shukla, Sonali P.; Puma, Michael J.; Nazarenko, Larissa S.

    2014-01-01

    Irrigation is the single largest anthropogenic water use, a modification of the land surface that significantly affects surface energy budgets, the water cycle, and climate. Irrigation, however, is typically not included in standard historical general circulation model (GCM) simulations along with other anthropogenic and natural forcings. To investigate the importance of irrigation as an anthropogenic climate forcing, we conduct two 5-member ensemble GCM experiments. Both are setup identical to the historical forced (anthropogenic plus natural) scenario used in version 5 of the Coupled Model Intercomparison Project, but in one experiment we also add water to the land surface using a dataset of historically estimated irrigation rates. Irrigation has a negligible effect on the global average radiative balance at the top of the atmosphere, but causes significant cooling of global average surface air temperatures over land and dampens regional warming trends. This cooling is regionally focused and is especially strong in Western North America, the Mediterranean, the Middle East, and Asia. Irrigation enhances cloud cover and precipitation in these same regions, except for summer in parts of Monsoon Asia, where irrigation causes a reduction in monsoon season precipitation. Irrigation cools the surface, reducing upward fluxes of longwave radiation (increasing net longwave), and increases cloud cover, enhancing shortwave reflection (reducing net shortwave). The relative magnitude of these two processes causes regional increases (northern India) or decreases (Central Asia, China) in energy availability at the surface and top of the atmosphere. Despite these changes in net radiation, however, climate responses are due primarily to larger magnitude shifts in the Bowen ratio from sensible to latent heating. Irrigation impacts on temperature, precipitation, and other climate variables are regionally significant, even while other anthropogenic forcings (anthropogenic aerosols

  14. Improving Energy Security for Air Force Installations

    Science.gov (United States)

    Schill, David

    Like civilian infrastructure, Air Force installations are dependent on electrical energy for daily operations. Energy shortages translate to decreased productivity, higher costs, and increased health risks. But for the United States military, energy shortages have the potential to become national security risks. Over ninety-five percent of the electrical energy used by the Air Force is supplied by the domestic grid, which is susceptible to shortages and disruptions. Many Air Force operations require a continuous source of energy, and while the Air Force has historically established redundant supplies of electrical energy, these back-ups are designed for short-term outages and may not provide sufficient supply for a longer, sustained power outage. Furthermore, it is the goal of the Department of Defense to produce or procure 25 percent of its facility energy from renewable sources by fiscal year 2025. In a government budget environment where decision makers are required to provide more capability with less money, it is becoming increasingly important for informed decisions regarding which energy supply options bear the most benefit for an installation. The analysis begins by exploring the field of energy supply options available to an Air Force installation. The supply options are assessed according to their ability to provide continuous and reliable energy, their applicability to unique requirements of Air Force installations, and their costs. Various methods of calculating energy usage by an installation are also addressed. The next step of this research develops a methodology and tool which assesses how an installation responds to various power outage scenarios. Lastly, various energy supply options are applied to the tool, and the results are reported in terms of cost and loss of installation capability. This approach will allow installation commanders and energy managers the ability to evaluate the cost and effectiveness of various energy investment options.

  15. Force-closure grasping with two hands

    Science.gov (United States)

    Caraza, Jose-Antonio Navarro

    1991-02-01

    This thesis addresses grasping of large (but not necessarily heavy) objects by using two hands. The objective is to determine force-closure grasps of rigid objects of unknown shape. A grasp is force-closure if it can completely constrain the movement of the object. In seeking force-closure conditions, the approach taken in this study is to establish useful sufficient conditions rather than necessary and sufficient conditions since the later requires the complete knowledge of the contact parameters. Based on the friction coefficient between hands and object, and on the grasp configuration (defined as the relative position and orientation of fingers and palms), a sufficient condition under which the two hands form a force-closure grasp has been established. The salient feature of this approach is that shape, orientation and location of the object, and contact points location are not assumed in this condition. This makes it possible to use simple sensors and algorithms. A configuration of two hands in contact with the object satisfying this condition is called force-closure grasp configuration (FCGC). The two hands in a FCGC are capable of picking up and moving the object by applying appropriate forces. The two-dimensional (2-D) case is initially studied. Later, the study is extended to the three-dimensional (3-D) case. The hands considered are either flat-surface palms or grippers with two angular-motion fingers. An algorithm has been developed to check the condition for FCGC in terms of the position and orientation of the hands. The algorithm was implemented on TRACS, an experimental multiagent robotic system developed at the GRASP Laboratory at the University of Pennsylvania. The results obtained are readily applicable to grasping large but lightweight objects. The simplicity of the conditions and the practical assumptions make it feasible to implement these results in real time.

  16. 77 FR 56845 - Meeting of the Community Preventive Services Task Force (Task Force)

    Science.gov (United States)

    2012-09-14

    ...: Matters to be discussed: Tobacco, oral health and cardiovascular disease. Meeting Accessibility: This... HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention (CDC), Department of Health...

  17. Relationship between friction force and orthodontic force at the leveling stage using a coated wire

    Directory of Open Access Journals (Sweden)

    Masaki MURAYAMA

    2013-12-01

    Full Text Available The relationship between orthodontic force and friction produced from an archwire and brackets affects the sliding of the wire in the leveling stage. Objective: The purpose of this study was to evaluate the relationship between force and friction in a small esthetic nickel-titanium (Ni-Ti wire. Material and Methods: Five esthetic wires (three coated and two plated and two small, plain Ni-Ti wires (0.012 and 0.014 inches were used. We performed a three-point bending test according to ISO 15841 and the drawing test with a dental arch model designed with upper linguoversion of the lateral incisor in the arch (displacements of 0.5, 1.0, 2.0 and 3.0 mm, and evaluated the relationship between them. Results: Unloading bending forces of all wires at displacements of less than 1.0 mm were larger than friction forces, but all friction forces at displacements exceeding 2.0 mm were larger than unloading bending forces. The arch likely expands when displacement from the proximal brackets exceeds 1.0 mm. The friction force of a martensite 0.014-inch Ni-Ti wire was significantly greater than those of the other esthetic and austenitic wires. Conclusions: A wire with the smallest possible friction force should be used in cases with more than 1.0 mm displacement.

  18. On the effect of drag forces in mooring system restoring forces

    Directory of Open Access Journals (Sweden)

    Ullah Zahid

    2017-01-01

    Full Text Available Mooring line is a major source of stability and plays a key role in the global response of offshore floating wind turbine. In the current state of the research, a formulation based on the analytical catenary equation is most commonly used for the analysis of mooring lines. However, due to the inability of catenary equations to consider the ocean current drag forces on mooring lines, the effect of drag forces on fairlead restoring forces has not been investigated yet. In this study, we have investigated the influence of drag forces on fairlead forces using discrete catenary formulation for modeling mooring line. The discrete catenary formulation has the ability to incorporate ocean current drag forces. Three types of elements; fully suspended, touchdown and seabed element are formulated to model the suspended, touchdown and seabed portion of a slack mooring line, respectively. The influence of viscous drag on the fairlead restoring forces is demonstrated through the analysis of OC3-Hywind mooring system subjected to ocean currents. It was found that the viscous drag significantly influences the fairlead forces.

  19. Force sensor for chameleon and Casimir force experiments with parallel-plate configuration

    NARCIS (Netherlands)

    Almasi, A.; Brax, P.; Iannuzzi, D.; Sedmik, R.

    2015-01-01

    The search for non-Newtonian forces has been pursued following many different paths. Recently it was suggested that hypothetical chameleon interactions, which might explain the mechanisms behind dark energy, could be detected in a high-precision force measurement. In such an experiment, interactions

  20. Mapping Electrostatic Forces Using Higher Harmonics Tapping Mode Atomic Force Microscopy in Liquid

    NARCIS (Netherlands)

    van Noort, S.J.T.; Willemsen, O.H.; van der Werf, Kees; de Grooth, B.G.; Greve, Jan

    1999-01-01

    A simple model of a damped, harmonic oscillator is used to describe the motion of an atomic force microscope cantilever tapping in fluid. By use of experimentally obtained parameters, excellent agreement is found between theory and experimental results. From the model we estimate that the force

  1. 78 FR 49484 - Exchange of Air Force Real Property for Non-Air Force Real Property

    Science.gov (United States)

    2013-08-14

    ... railway land described above was determined to be excess to military mission needs on April 29, 2013. The... military operations at Hanscom Air Force Base, Massachusetts. Description of the Air Force Property: Approximately 36 acres of railway corridor of irregular width, located in the North Falmouth section of the Town...

  2. Flextime: A Modified Work Force Scheduling Technique for Selected Headquarters Air Force Logistics Command Organizations.

    Science.gov (United States)

    Kimzey, Reed T.; Prince, Samuel M. O.

    The thesis discusses the advantages and disadvantages of one work force scheduling technique--flextime. The authors were interested in determining if a flextime schedule could be put into effect in a governmental organization such as Headquarters Air Force Logistics Command (AFLC). The study objectives were to determine the feasibility,…

  3. Feedback Control of Floor Reaction Force Based on Force-Reflecting-Type Multilateral Control

    Science.gov (United States)

    Nagase, Kazuki; Katsura, Seiichiro

    Real-world haptics is being studied not only for improving feedback on real-world haptic information in teleoperation but also for developing key technologies for future human support. For the remote operating of systems at distant places, haptic information is required in addition to visual information. The haptic information around a work environment can be the floor reaction force, which can be obtained using a movement-type haptic device. The floor reaction force from the environment that the mobile haptic device touches is fed back accurately to the operator. First, this paper proposes a general force-reflecting-type multilateral control. Second, this paper extends the control to feedback control of the floor reaction force by using force-reflecting-type multilateral control and a novel haptic device employing a biped robot with a slave system. The position response of a master system is transformed to a leg tip position command for the biped-type haptic device. In addition, the floor reaction force determined by the biped-type haptic device is fed back to the master system. The proposed method can determine the force feedback to the sole of the foot, which is not possible with a conventional stationary system. As a result, the floor reaction force from a large area can be obtained, and the operability of the control system is improved by using the proposed system.

  4. Protective force legal issues: the security perspective

    International Nuclear Information System (INIS)

    Rich, B.L.

    1984-01-01

    There has been much discussion and some controversy on the legal issues faced by the Department of Energy's (DOE) protective forces in the performance of their security duties. These include the observance of legal proprieties in the arrest of non-violent demonstrators, the use of lethal weapons, and the extent of protective forces' authority to carry weapons and protect DOE's security interests offsite. In brief, the need to protect DOE's security interests may be in nominal conflict with other requirements. When faced with a potential conflict in requirements, we in the DOE security community must place first attention to the security mission -- to deter and prevent hostile acts

  5. Forces in Physics A Historical Perspective

    CERN Document Server

    Shore, Steven N

    2008-01-01

    Force is one of the most elementary concepts that must be understood in order to understand modern science; it is discussed extensively in textbooks at all levels and is a requirement in most science guidelines. It is also one of the most challenging - how could one idea be involved in such disparate physical phenomena as gravity and radioactivity? Forces in Physics helps the science student by explaining how these ideas originally were developed and provides context to the stunning conclusions that scientists over the centuries have arrived at. It covers the history of all of the four traditi

  6. THE DEMOCRATIC CONTROL OF MILITARY FORCES

    Directory of Open Access Journals (Sweden)

    Smail Oštraković

    2011-04-01

    Full Text Available The transition requirement for post communism countries, especially the part that is about military forces is to establish those civil-military relation that will have prepared projects for awareness evolving of society and military about necessity of democratic control over military sector of country through development of many different communication forms and shapes. Before everything, it means the entire freedom and independence of media at access to military forces as the topic and subject of its interests and also the organization of public military communication system as integral part of information-communication system in society

  7. Driving Force Based Design of Cyclic Distillation

    DEFF Research Database (Denmark)

    Nielsen, Rasmus Fjordbak; Huusom, Jakob Kjøbsted; Abildskov, Jens

    2017-01-01

    Driving force based design is adopted from conventional continuous distillation to cyclic distillation. This leads to a definition of the operating line representation for the cyclic distillation process. A possible realization of the driving force design is presented, which implies operation...... with mixed phase feeds. A range of binary test cases, benzene toluene, methanol water, and ethanol water, are evaluated. The advantage of the design approach in cyclic distillation is shown to be analogous to the advantages obtained in conventional continuous distillation, including a minimal utility...

  8. Forced vibrations of rotating circular cylindrical shells

    International Nuclear Information System (INIS)

    Igawa, Hirotaka; Maruyama, Yoshiyuki; Endo, Mitsuru

    1995-01-01

    Forced vibrations of rotating circular cylindrical shells are investigated. Basic equations, including the effect of initial stress due to rotation, are formulated by the finite-element method. The characteristic relations for finite elements are derived from the energy principle by considering the finite strain. The equations of motion can be separated into quasi-static and dynamic ones, i.e., the equations in the steady rotating state and those in the vibration state. Radial concentrated impulses are considered as the external dynamic force. The transient responses of circular cylindrical shells are numerically calculated under various boundary conditions and rotating speeds. (author)

  9. Adsorbing staircase polygons subject to a force

    Science.gov (United States)

    Beaton, Nicholas R.

    2017-12-01

    We study several models of staircase polygons on the 45\\circ rotated square lattice, which interact with an impenetrable surface while also being pushed towards or pulled away from the surface by a force. The surface interaction is governed by a fugacity a and the force by a fugacity y. Staircase polygons are simplifications of more general self-avoiding polygons, a well-studied model of interacting ring polymers. For this simplified case we are able to exactly determine the limiting free energy in the full a-y plane, and demonstrate that staircase polygons exhibit four different phases, including a ‘mixed’ adsorbed-ballistic phase.

  10. FMNL formins boost lamellipodial force generation

    DEFF Research Database (Denmark)

    Kage, Frieda; Winterhoff, Moritz; Dimchev, Vanessa

    2017-01-01

    Migration frequently involves Rac-mediated protrusion of lamellipodia, formed by Arp2/3 complex-dependent branching thought to be crucial for force generation and stability of these networks. The formins FMNL2 and FMNL3 are Cdc42 effectors targeting to the lamellipodium tip and shown here...... reduces both migration and capability of cells to move against viscous media. Together, we conclude that force generation in lamellipodia strongly depends on FMNL formin activity, operating in addition to Arp2/3 complex-dependent filament branching....

  11. The driving force for magnetospheric convection

    Science.gov (United States)

    Johnson, F. S.

    1978-01-01

    Viscously driven magnetospheric models, as well as a model involving interconnection between the geomagnetic field and the magnetic field in the solar wind, have been proposed to describe the driving force for magnetospheric convection. Lack of a satisfactory theory for the interconnection in the latter model and, in the case of the viscous interaction models, inadequacies in predicting the quantity of the driving force, make these two classes of models less than successful. Accordingly, a mechanically driven magnetospheric model is proposed: solar wind plasma enters the magnetosphere around the neutral points, covers the inner surface of the magnetopause and subsequently expands, driving convection as it escapes from the open tail.

  12. Atomic force microscopy on liquid crystals

    Science.gov (United States)

    Bahr, Christian; Schulz, Benjamin

    This chapter provides an introduction to the atomic force microscopy (AFM) on thermotropic liquid crystals. We first give a general introduction to the technique of AFM and then describe the special requirements that have to be met for the imaging of liquid-crystalline surfaces. We also discuss the relation between the quality or reliability of the imaging results and various parameters of the scanning conditions. We briey review the existing work on AFM on liquid crystals and finally describe applications beyond the imaging, such as molecular force spectroscopy or manipulation of surface structures.

  13. Demoulding force in micro-injection moulding

    DEFF Research Database (Denmark)

    Griffiths, C.A.; Dimov, S.S.; Scholz, S.

    2012-01-01

    The paper reports an experimental study that investigates part demoulding behavior in micro injection moulding (MIM) with a focus on the effects of pressure (P) and temperature (T) on the demoulding forces. Demoulding of a microfluidics part is conducted and the four processing parameters of melt...... temperature (Tb), mould temperature (Tm), holding pressure (Ph) and injection speed (Vi) are analysed. The result using different combinations of process parameters were used to identify the best processing conditions in regards to demoulding forces when moulding micro parts....

  14. A cutting force model for micromilling applications

    DEFF Research Database (Denmark)

    Bissacco, Giuliano; Hansen, Hans Nørgaard; De Chiffre, Leonardo

    2006-01-01

    In micro milling the maximum uncut chip thickness is often smaller than the cutting edge radius. This paper introduces a new cutting force model for ball nose micro milling that is capable of taking into account the effect of the edge radius.......In micro milling the maximum uncut chip thickness is often smaller than the cutting edge radius. This paper introduces a new cutting force model for ball nose micro milling that is capable of taking into account the effect of the edge radius....

  15. New Electromagnetic Force-Displacement Sensor

    OpenAIRE

    Benabdellah, Amine; Abbassi, Zakarya; Nakheli, Abdelrhani

    2016-01-01

    A new electromagnetic force-displacement sensor is presented. Its operating principle is based on the fundamental laws of electromagnetism (Faraday-Lenz law) and the mechanical properties of a spring. The active elements are two coils made by a wire of 60 µm in diameter. Using different wire diameters or different number of wire turns in the coil modify the intensity of the magnetic field and the sensor response. The average accuracy of the sensor is about ∆d=1µm, and as a force sensor is abo...

  16. Comparative investigations of tablet crushing force testers

    DEFF Research Database (Denmark)

    Sonnergaard, Jørn; Jensen, C.G.; Poulsen, L.

    2005-01-01

    The performance of 16 tablet breaking force testers was evaluated in terms of accuracy, reproducibility and repeatability. Three tablet formulations with different plastic or brittle deformation mechanisms and with target breaking forces of 50, 100 and 150 N were tested. Statistically significant...... by the concept of components of variance was 5-7 % depending on the model tablet excipient. The standard deviation within testers (repeatability) was affected by the type of model formulation showing increasing variability with increasing brittleness of the compressed material. No specific effect of altering...

  17. Security force-adversary engagement simulation

    International Nuclear Information System (INIS)

    Bennett, H.A.

    1975-01-01

    A dynamic simulation of a security force-adversary engagement has been developed to obtain a better understanding of the complexities involved in security systems. Factors affecting engagement outcomes were identified and interrelated to represent an ambush of an escorted nuclear fuel truck convoy by an adversary group. Other forms of engagement such as assault and skirmish also can be simulated through suitable parameter changes. The dynamic model can provide a relative evaluation of changes in security force levels, equipment, training, and tactics. Continued application and subsequent refinements of the model are expected to augment the understanding of component interaction within a guard-based security system

  18. Rigid origami vertices: conditions and forcing sets

    Directory of Open Access Journals (Sweden)

    Zachary Abel

    2016-04-01

    Full Text Available We develop an intrinsic necessary and sufficient condition for single-vertex origami crease patterns to be able to fold rigidly.  We classify such patterns in the case where the creases are pre-assigned to be mountains and valleys as well as in the unassigned case.  We also illustrate the utility of this result by applying it to the new concept of minimal forcing sets for rigid origami models, which are the smallest collection of creases that, when folded, will force all the other creases to fold in a prescribed way.

  19. Investigation of penetration force of living cell using an atomic force microscope

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Eun Young; Kim, Young Tae; Kim, Dae Eun [Yonsei University, Seoul (Korea, Republic of)

    2009-07-15

    Recently, the manipulation of a single cell has been receiving much attention in transgenesis, in-vitro fertilization, individual cell based diagnosis, and pharmaceutical applications. As these techniques require precise injection and manipulation of cells, issues related to penetration force arise. In this work the penetration force of living cell was studied using an atomic force microscope (AFM). L929, HeLa, 4T1, and TA3 HA II cells were used for the experiments. The results showed that the penetration force was in the range of 2{approx}22 nN. It was also found that location of cell penetration and stiffness of the AFM cantilever affected the penetration force significantly. Furthermore, double penetration events could be detected, due to the multi-membrane layers of the cell. The findings of this work are expected to aid in the development of precision micro-medical instruments for cell manipulation and treatment

  20. Friction force measurements relevant to de-inking by means of atomic force microscope.

    Science.gov (United States)

    Theander, Katarina; Pugh, Robert J; Rutland, Mark W

    2005-11-15

    In the pulping step of the de-inking process, the ink detaches from the fibers due to shear and physical chemical interaction. In order to get a better understanding of the forces involved between cellulose and ink, the atomic force microscope and the colloidal probe technique have been used in the presence of a model chemical dispersant (hexa-ethyleneglycol mono n-dodecyl ether, C12E6). A cellulose bead was used as the colloidal probe and three different lower surfaces have been used, an alkyd resin, mica and a cellulose sphere. The normal and lateral forces have been measured at a range of nonionic concentrations. It was found that the lateral sliding friction forces deceased with increasing surfactant concentration for both the alkyd resin and mica while no differences were observed for the cellulose surface. In addition, only a very small change in normal force could be detected for the alkyd surface as the concentration changed.

  1. An Optimization-Based Impedance Approach for Robot Force Regulation with Prescribed Force Limits

    Directory of Open Access Journals (Sweden)

    R. de J. Portillo-Vélez

    2015-01-01

    Full Text Available An optimization based approach for the regulation of excessive or insufficient forces at the end-effector level is introduced. The objective is to minimize the interaction force error at the robot end effector, while constraining undesired interaction forces. To that end, a dynamic optimization problem (DOP is formulated considering a dynamic robot impedance model. Penalty functions are considered in the DOP to handle the constraints on the interaction force. The optimization problem is online solved through the gradient flow approach. Convergence properties are presented and the stability is drawn when the force limits are considered in the analysis. The effectiveness of our proposal is validated via experimental results for a robotic grasping task.

  2. Dissipation and oscillatory solvation forces in confined liquids studied by small-amplitude atomic force spectroscopy

    International Nuclear Information System (INIS)

    De Beer, Sissi; Van den Ende, Dirk; Mugele, Frieder

    2010-01-01

    We determine conservative and dissipative tip-sample interaction forces from the amplitude and phase response of acoustically driven atomic force microscope (AFM) cantilevers using a non-polar model fluid (octamethylcyclotetrasiloxane, which displays strong molecular layering) and atomically flat surfaces of highly ordered pyrolytic graphite. Taking into account the base motion and the frequency-dependent added mass and hydrodynamic damping on the AFM cantilever, we develop a reliable force inversion procedure that allows for extracting tip-sample interaction forces for a wide range of drive frequencies. We systematically eliminate the effect of finite drive amplitudes. Dissipative tip-sample forces are consistent with the bulk viscosity down to a thickness of 2-3 nm. Dissipation measurements far below resonance, which we argue to be the most reliable, indicate the presence of peaks in the damping, corresponding to an enhanced 'effective' viscosity, upon expelling the last and second-last molecular layer.

  3. Classical description of dynamical many-body systems with central forces, spin-orbit forces and spin-spin forces

    International Nuclear Information System (INIS)

    Goepfert, A.

    1994-01-01

    This thesis develops a new model, and related numerical methods, to describe classical time-dependent many-body systems interacting through central forces, spin-orbit forces and spin-spin forces. The model is based on two-particle interactions. The two-body forces consist of attractive and repulsive parts. In this model the investigated multi-particle systems are self-bound. Also the total potential of the whole ensemble is derived from the two-particle potential and is not imposed 'from outside'. Each particle has the three degrees of freedom of its centre-of-mass motion and the spin degree of freedom. The model allows for the particles to be either charged or uncharged. Furthermore, each particle has an angular momentum, an intrinsic spin, and a magnetic dipole moment. Through the electromagnetic forces between these charges and moments there arise dynamical couplings between them. The internal interactions between the charges and moments are well described by electromagnetic coupling mechanisms. In fact, compared to conventional classical molecular dynamics calculations in van der Waals clusters, which have no spin degrees of freedom, or for Heisenberg spin Systems, which have no orbital degrees of freedom, the model presented here contains both types of degrees of freedom with a highly non-trivial coupling. The model allows to study the fundamental effects resulting from the dynamical coupling of the spin and the orbital-motion sub-systems. In particular, the dynamics of the particle mass points show a behaviour basically different from the one of particles in a potential with only central forces. Furthermore, a special type of quenching procedure was invented, which tends to drive the multi-particle Systems into states with highly periodic, non-ergodic behaviour. Application of the model to cluster simulations has provided evidence that the model can also be used to investigate items like solid-to-liquid phase transitions (melting), isomerism and specific heat

  4. Extending Bell's model: how force transducer stiffness alters measured unbinding forces and kinetics of molecular complexes.

    Science.gov (United States)

    Walton, Emily B; Lee, Sunyoung; Van Vliet, Krystyn J

    2008-04-01

    Forced unbinding of complementary macromolecules such as ligand-receptor complexes can reveal energetic and kinetic details governing physiological processes ranging from cellular adhesion to drug metabolism. Although molecular-level experiments have enabled sampling of individual ligand-receptor complex dissociation events, disparities in measured unbinding force F(R) among these methods lead to marked variation in inferred binding energetics and kinetics at equilibrium. These discrepancies are documented for even the ubiquitous ligand-receptor pair, biotin-streptavidin. We investigated these disparities and examined atomic-level unbinding trajectories via steered molecular dynamics simulations, as well as via molecular force spectroscopy experiments on biotin-streptavidin. In addition to the well-known loading rate dependence of F(R) predicted by Bell's model, we find that experimentally accessible parameters such as the effective stiffness of the force transducer k can significantly perturb the energy landscape and the apparent unbinding force of the complex for sufficiently stiff force transducers. Additionally, at least 20% variation in unbinding force can be attributed to minute differences in initial atomic positions among energetically and structurally comparable complexes. For force transducers typical of molecular force spectroscopy experiments and atomistic simulations, this energy barrier perturbation results in extrapolated energetic and kinetic parameters of the complex that depend strongly on k. We present a model that explicitly includes the effect of k on apparent unbinding force of the ligand-receptor complex, and demonstrate that this correction enables prediction of unbinding distances and dissociation rates that are decoupled from the stiffness of actual or simulated molecular linkers.

  5. Nanonet force microscopy for measuring forces in single smooth muscle cells of the human aorta.

    Science.gov (United States)

    Hall, Alexander; Chan, Patrick; Sheets, Kevin; Apperson, Matthew; Delaughter, Christopher; Gleason, Thomas G; Phillippi, Julie A; Nain, Amrinder

    2017-07-07

    A number of innovative methods exist to measure cell-matrix adhesive forces, but they have yet to accurately describe and quantify the intricate interplay of a cell and its fibrous extracellular matrix (ECM). In cardiovascular pathologies, such as aortic aneurysm, new knowledge on the involvement of cell-matrix forces could lead to elucidation of disease mechanisms. To better understand this dynamics, we measured primary human aortic single smooth muscle cell (SMC) forces using nanonet force microscopy in both inside-out (I-O intrinsic contractility) and outside-in (O-I external perturbation) modes. For SMC populations, we measured the I-O and O-I forces to be 12.9 ± 1.0 and 57.9 ± 2.5 nN, respectively. Exposure of cells to oxidative stress conditions caused a force decrease of 57 and 48% in I-O and O-I modes, respectively, and an increase in migration rate by 2.5-fold. Finally, in O-I mode, we cyclically perturbed cells at constant strain of varying duration to simulate in vivo conditions of the cardiac cycle and found that I-O forces decrease with increasing duration and O-I forces decreased by half at shorter cycle times. Thus our findings highlight the need to study forces exerted and felt by cells simultaneously to comprehensively understand force modulation in cardiovascular disease. © 2017 Hall et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  6. 32 CFR 842.11 - Air Force claims organization.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Air Force claims organization. 842.11 Section 842.11 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE CLAIMS AND LITIGATION ADMINISTRATIVE CLAIMS Functions and Responsibilities § 842.11 Air Force claims organization. Air Force claims channels are: (a) Continental...

  7. Modeling capillary forces for large displacements

    NARCIS (Netherlands)

    Mastrangeli, M.; Arutinov, G.; Smits, E.C.P.; Lambert, P.

    2014-01-01

    Originally applied to the accurate, passive positioning of submillimetric devices, recent works proved capillary self-alignment as effective also for larger components and relatively large initial offsets. In this paper, we describe an analytic quasi-static model of 1D capillary restoring forces

  8. Circle diffeomorphisms forced by expanding circle maps

    NARCIS (Netherlands)

    Homburg, A.J.

    2012-01-01

    We discuss the dynamics of skew product maps defined by circle diffeomorphisms forced by expanding circle maps. We construct an open class of such systems that are robustly topologically mixing and for which almost all points in the same fiber converge under iteration. This property follows from the

  9. Forced population displacement | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2015-10-28

    Oct 28, 2015 ... UPDATE | SAFE AND INCLUSIVE CITIES What is driving urban violence? ... While their homes have improved, families are struggling to cope with the realities of forced changes in lifestyle: jobs and schools are no longer safe or easy to reach, and new environments are unfamiliar and menacing.

  10. Unified Technical Concepts. Module 8: Force Transformers.

    Science.gov (United States)

    Technical Education Research Center, Waco, TX.

    This concept module on force transformers is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

  11. Labor Force Trends: A Synthesis and Analysis

    Science.gov (United States)

    Bednarzik, Robert W.; Klein, Deborah P.

    1977-01-01

    Since 1950, social changes and employment-retirement experiences have contributed to a dramatic increase in labor force participation rates for women, a slower but steady decline for men, and a mixed pattern for teenagers. Tables and charts depict data analyzed in the text. (MF)

  12. Catastrophic antiphospholipid syndrome: task force report summary.

    Science.gov (United States)

    Cervera, R; Rodríguez-Pintó, I

    2014-10-01

    The Task Force on Catastrophic Antiphospholipid Syndrome (CAPS) aimed to assess the current knowledge on pathogenesis, clinical and laboratory features, diagnosis and classification, precipitating factors and treatment of CAPS. This article summarizes the main aspects of its final report. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  13. Important characteristics of operational force members

    CSIR Research Space (South Africa)

    Van Heerden, Adelai

    2017-10-01

    Full Text Available The operational forces military context is generally acknowledged as one of the most stressful contexts as it is demanding of members on a physical, psychological, social level with organisational, intra- and inter-personal demands of an extreme...

  14. Methods of Force Identification for Earth Penetrators

    Science.gov (United States)

    1980-01-01

    convenient to introduce two coordinate systems: i. a moving coordinate system (x,y,z) embedded in the projectile such that x always lies along the...Laboratory Fld Off for Wpns EffectivenessATTN, Code 2627 Department of the Air Force Naval Sea Systems Comand ATTN: E. Jackett ATTN:, SEA-9931G Rome Air

  15. Alternative psychosis (forced normalisation) in epilepsy

    African Journals Online (AJOL)

    Landolt was the first to report improvement in EEG activity during periods of abnormal behaviour.6-9. The mechanism of forced normalisation is still not fully understood, although the kindling phenomenon, the phenomenon of long-term potentiation and the channel disorder paradigm have all been proposed as possible.

  16. The Physics Force presents The Physics Circus

    Science.gov (United States)

    Dahlberg, E. Dan

    2015-03-01

    The Physics Force of the University of Minnesota is an outreach program developed with the goal to show students and the public Science is Fun, Science is Interesting, and Science is Understandable. The program grew from a rather small effort by three high school physics teachers and two University of Minnesota staff members. In the almost three decades since its humble beginnings of 100 attendees in a year, it has grown to an average attendance of over 36,000 annually. In the last three years alone, about 110,000 Minnesotans have seen a performance of The Physics Circus which is roughly 2% of the population of the state. In addition to the performances in Minnesota, The Force performed two years at Disney's Epcot Center, was featured on Newton's Apple, and made appearances on the very successful German TV science show, the Knoff-Hoff Show. I will begin the talk with some of our motivation to develop The Physics Force arising from the current ``scientific state'' of our society and then provide more information on The Force including both some history and examples taken from our Physics Circus.

  17. Alternative psychosis (forced normalisation) in epilepsy

    African Journals Online (AJOL)

    Patients with refractory temporal lobe epilepsy who undergo unilateral anterior temporal lobectomy have been observed to develop a de novo psychosis with diminished seizures. This is thought to be an alternative psychosis related to forced normalisation of the EEG.8,12-14. The absence of clear diagnostic criteria for ...

  18. Optimization of Marine Forces Reserve Equipment Redistribution

    Science.gov (United States)

    2016-06-01

    industry as an example. Bertrand and Bookbinder begin with a basic supply chain logistics model of a large warehouse supplying a number of retail...solutions, and perform fast sensitivity analysis on the competing objectives. 14. SUBJECT TERMS Optimization, Marine Forces Reserve, redistribution...reallocation, equipment supply , logistics 15. NUMBER OF PAGES 61 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY

  19. Measuring Agglomeration Forces in a Financial Center

    OpenAIRE

    Bourgain, Arnaud; Pieretti, Patrice

    2006-01-01

    Basing on Scitovsky's (1954) definition of external economies and applying the method of Caballero and Lyons (1990) to macro data of Luxembourg services industry, we find significant agglomeration forces between financial intermediaries (downstream industry) on the one hand and business services and computer industry (upstream industries) on the other.

  20. Pedestrian-induced lateral forces on footbridges

    DEFF Research Database (Denmark)

    Ingolfsson, Einar Thor; Georgakis, Christos T.; Jönsson, Jeppe

    2012-01-01

    This paper investigates the phenomenon of excessive pedestrian-induced lateral vibrations as observed on several high-profile footbridges. The vibrations are a consequence of human-structure interaction, in which the forces generated by the pedestrians depend strongly on the vibration of the unde......This paper investigates the phenomenon of excessive pedestrian-induced lateral vibrations as observed on several high-profile footbridges. The vibrations are a consequence of human-structure interaction, in which the forces generated by the pedestrians depend strongly on the vibration...... of the underlying pavement. An extensive experimental analysis has been carried out to determine the lateral forces generated by pedestrians when walking on a laterally moving treadmill. Two different conditions are investigated; initially the treadmill is fixed and then it is laterally driven in a sinusoidal...... motion at varying combinations of frequencies (0.33-1.07 Hz) and amplitudes (4.5-48 mm). The component of the pedestrian-induced force which is caused by the laterally moving surface is herewith quantified through equivalent velocity and acceleration proportional coefficients. It is shown that large...

  1. Pedestrian-induced lateral forces on footbridges

    DEFF Research Database (Denmark)

    Ingólfsson, Einar Thór; Georgakis, Christos T.; Jönsson, Jeppe

    2011-01-01

    This paper investigates the phenomenon of excessive pedestrian-induced lateral vibrations as observed on several high-profile footbridges. The vibrations are a consequence of human-structure interaction, in which the forces generated by the pedestrians depend strongly on the vibration of the unde......This paper investigates the phenomenon of excessive pedestrian-induced lateral vibrations as observed on several high-profile footbridges. The vibrations are a consequence of human-structure interaction, in which the forces generated by the pedestrians depend strongly on the vibration...... of the underlying pavement. An extensive experimental analysis has been carried out to determine the lateral forces generated by pedestrians when walking on a laterally moving treadmill. Two different conditions are investigated; initially the treadmill is fixed and then it is laterally driven in a sinusoidal...... motion at varying combinations of frequencies (0.33-1.07 Hz) and amplitudes (4.5-48 mm). The component of the pedestrian-induced force which is caused by the laterally moving surface is herewith quantified through equivalent velocity and acceleration proportional coefficients. It is shown that large...

  2. Global and local forces in deindustrialization

    NARCIS (Netherlands)

    Frederick, Kate

    2017-01-01

    Numerous scholars have suggested that nineteenth-century industrial decline in the global “periphery” was driven by externally wrought global forces that promoted cash-crop agriculture and dis-incentivized local industry, particularly strong global demand for tropical agricultural commodities and

  3. Resistance of plants to gravitational force.

    Science.gov (United States)

    Soga, Kouichi

    2013-09-01

    Developing resistance to gravitational force is a critical response for terrestrial plants to survive under 1 × g conditions. We have termed this reaction "gravity resistance" and have analyzed its nature and mechanisms using hypergravity conditions produced by centrifugation and microgravity conditions in space. Our results indicate that plants develop a short and thick body and increase cell wall rigidity to resist gravitational force. The modification of body shape is brought about by the rapid reorientation of cortical microtubules that is caused by the action of microtubule-associated proteins in response to the magnitude of the gravitational force. The modification of cell wall rigidity is regulated by changes in cell wall metabolism that are caused by alterations in the levels of cell wall enzymes and in the pH of apoplastic fluid (cell wall fluid). Mechanoreceptors on the plasma membrane may be involved in the perception of the gravitational force. In this review, we discuss methods for altering gravitational conditions and describe the nature and mechanisms of gravity resistance in plants.

  4. Cellular forces : adhering, shaping, sensing and dividing

    NARCIS (Netherlands)

    Hoorn, Hedde van

    2014-01-01

    Life’s building block is a cell. Different cell types are differentiated by specific functional properties. A white blood cell, for instance, can get rid of bacteria and many muscle cells contract together for proper muscle function. Deformation and force exertion play important roles in these

  5. Thermodynamic driving force for rafting in superalloys

    CSIR Research Space (South Africa)

    Nabarro, FRN

    1996-08-01

    Full Text Available Eshelby’s energy-momentum tensor is used to provide an analytical expression for the driving force for rafting in the elastic regime in a super alloy with a high volume fraction of gamma'. The structure is modeled as a simple cubic array of gamma...

  6. Does the electromotive force (always represent work?

    Directory of Open Access Journals (Sweden)

    C. J. Papachristou

    2015-03-01

    Full Text Available In the literature of Electromagnetism, the electromotive force of a "circuit" is often defined as work done on a unit charge during a complete tour of the latter around the circuit. We explain why this statement cannot be generally regarded as true, although it is indeed true in certain simple cases. Several examples are used to illustrate these points.

  7. Harmonic force field for nitro compounds.

    Science.gov (United States)

    Bellido, Edson P; Seminario, Jorge M

    2012-06-01

    Molecular simulations leading to sensors for the detection of explosive compounds require force field parameters that can reproduce the mechanical and vibrational properties of energetic materials. We developed precise harmonic force fields for alanine polypeptides and glycine oligopeptides using the FUERZA procedure that uses the Hessian tensor (obtained from ab initio calculations) to calculate precise parameters. In this work, we used the same procedure to calculate generalized force field parameters of several nitro compounds. We found a linear relationship between force constant and bond distance. The average angle in the nitro compounds was 116°, excluding the 90° angle of the carbon atoms in the octanitrocubane. The calculated parameters permitted the accurate molecular modeling of nitro compounds containing many functional groups. Results were acceptable when compared with others obtained using methods that are specific for one type of molecule, and much better than others obtained using methods that are too general (these ignore the chemical effects of surrounding atoms on the bonding and therefore the bond strength, which affects the mechanical and vibrational properties of the whole molecule).

  8. Nuclear power - a force for growth

    International Nuclear Information System (INIS)

    Davies, Howard

    1993-01-01

    Britain's nuclear power industry continues to perform and to innovate at a rate unbeaten virtually anywhere else in the world. But, it is argued, the political and economic constraints in which it is forced to operate means that the benefits are not fully exploited. (author)

  9. Nanoindentation and atomic force microscopy measurements on ...

    Indian Academy of Sciences (India)

    Unknown

    substrate temperature to ~ 130°C during the deposition. The growth rate for TiN coatings was ~ 0⋅82 µm/h. The nanoindentation measurements were performed with an instrument consisting of a nanohardness tester. (CSEM Instruments) and an integrated optical (Nikon)/ atomic force microscope (surface imaging systems).

  10. Forced Migration and Global Responsibility for Health

    Science.gov (United States)

    Bozorgmehr, Kayvan; Razum, Oliver

    2017-01-01

    Forced migration has become a world-wide phenomenon in the past century, affecting increasing numbers of countries and people. It entails important challenges from a global health perspective. Leppold et al have critically discussed the Japanese interpretation of global responsibility for health in the context of forced migration. This commentary complements their analysis by outlining three priority areas of global health responsibility for European Union (EU) countries. We highlight important stages of the migration phases related to forced migration and propose three arguments. First, the chronic neglect of the large number of internally displaced persons (IDPs) in the discourses on the "refugee crisis" needs to be corrected in order to develop sustainable solutions with a framework of the Sustainable Development Goals (SDGs). Second, protection gaps in the global system of protection need to be effectively closed to resolve conflicts with border management and normative global health frameworks. Third, effective policies need to be developed and implemented to meet the health and humanitarian needs of forced migrants; at the same time, the solidarity crisis within the EU needs to be overcome. These stakes are high. EU countries, being committed to global health, should urgently address these areas. PMID:28812838

  11. ARMED FORCES AND INTERVENTION IN TROPICAL AFRICA

    African Journals Online (AJOL)

    of what they have done, and because of what everyone now realises they might do. How can we explain this dramatic metamorphosis? Major-General. Yakubu Gowan, Commander-In-Chlef of the Armed Forces and Head of the Federal Military. Government. Military Indigenisation and Professionalism. Prior to the departure ...

  12. Computing Method of Forces on Rivet

    Directory of Open Access Journals (Sweden)

    Ion DIMA

    2014-03-01

    Full Text Available This article aims to provide a quick methodology of forces calculation on rivet in single shear using the finite element method (FEM – NASTRAN/PATRAN. These forces can be used for the calculus of bearing, inter rivet buckling and riveting check. For this method to be efficient and fast, a macro has been developed based on this methodology described in the article. The macro was wrote in Visual Basic with Excel interface. In the beginning phase of any aircraft project, when the rivets type and position are not yet precisely known, the modelling of rivets, as attachment elements between items, is made node on node in the finite element model, without taking account of the rivets position. Although the rivets are not modelled in the finite element model, this method together with the macro enable a quick extraction and calculation of the forces on the rivet. This calculation of forces on rivet is intended to critical case, selected from the stress plots of NASTRAN for max. /min. principal stress and shear.

  13. Gender Fairness within the Force Concept Inventory

    Science.gov (United States)

    Traxler, Adrienne; Henderson, Rachel; Stewart, John; Stewart, Gay; Papak, Alexis; Lindell, Rebecca

    2018-01-01

    Research on the test structure of the Force Concept Inventory (FCI) has largely ignored gender, and research on FCI gender effects (often reported as "gender gaps") has seldom interrogated the structure of the test. These rarely crossed streams of research leave open the possibility that the FCI may not be structurally valid across…

  14. Force balanced magnetic energy storage system

    International Nuclear Information System (INIS)

    Mawardi, O.K.; Nara, H.; Grabnic, M.

    1979-01-01

    A novel scheme of constructing coils suited for inductive storage system is described. By means of a force-compensating method, the reinforcement structure can be made considerably smaller than that needed for conventional coils. The economics of this system is shown to be capable of achieving savings of upwards of 40% when compared to a conventional system

  15. NATO-Warsaw Pact. Force Mobilization

    Science.gov (United States)

    1988-01-01

    had the economic capability to maintain a peacetime force sufficient for wartime requirements. 10 Consequently, both sides would have to depend heav ...other things, depends on deviations from the "normal pattern of activity." Danish defense planers have become increasingly worried about the War- saw

  16. Leadership Forces in Hong Kong Secondary Schools

    Science.gov (United States)

    Pang, Nicholas Sun Keung

    2010-01-01

    An attempt was made to formulate a theoretical framework of leadership forces in school organisations, which includes bureaucratic linkage, cultural linkage, tight coupling and loose coupling. Two instruments, the School Values Inventory (SVI) and the Teachers' School Life Questionnaire (TSLQ), were created and developed for this study to assess…

  17. School choice, segregation, and forced school closure

    NARCIS (Netherlands)

    Ong, C.; de Witte, K.

    2014-01-01

    We exploit the forced closure of three segregated primary schools in Amsterdam to establish the determinants of school choice of ethnic minority pupils. The schools were closed due to mismanagement and poor assessment from the Education Inspectorate. Most of the affected students were of socially

  18. Cohesion: a scientific history of intermolecular forces

    National Research Council Canada - National Science Library

    Rowlinson, J. S

    2002-01-01

    .... The final section gives an account of the successful use in the 20th century of quantum mechanics and statistical mechanics to resolve most of the remaining problems. Throughout the last 300 years there have been periods of tremendous growth in our understanding of intermolecular forces but such interest proved to be unsustainable, and long periods of...

  19. Forces Associated with Nonlinear Nonholonomic Constraint Equations

    Science.gov (United States)

    Roithmayr, Carlos M.; Hodges, Dewey H.

    2010-01-01

    A concise method has been formulated for identifying a set of forces needed to constrain the behavior of a mechanical system, modeled as a set of particles and rigid bodies, when it is subject to motion constraints described by nonholonomic equations that are inherently nonlinear in velocity. An expression in vector form is obtained for each force; a direction is determined, together with the point of application. This result is a consequence of expressing constraint equations in terms of dot products of vectors rather than in the usual way, which is entirely in terms of scalars and matrices. The constraint forces in vector form are used together with two new analytical approaches for deriving equations governing motion of a system subject to such constraints. If constraint forces are of interest they can be brought into evidence in explicit dynamical equations by employing the well-known nonholonomic partial velocities associated with Kane's method; if they are not of interest, equations can be formed instead with the aid of vectors introduced here as nonholonomic partial accelerations. When the analyst requires only the latter, smaller set of equations, they can be formed directly; it is not necessary to expend the labor to form the former, larger set first and subsequently perform matrix multiplications.

  20. Patterns of Change: Forces and Motion

    Science.gov (United States)

    Phillips, Marianne; Jeffery, Tonya D.

    2016-01-01

    Patterns of Change: Forces and Motion is an integrated science lesson that uses the 5E lesson cycle to tie together science with language arts, mathematics, literature, technology, engineering and social studies in an engaging format applicable for young learners. This lesson has been uniquely designed for the purpose of providing elementary…