WorldWideScience

Sample records for tecnicas estadisticas multifactoriales

  1. UNA TECNICA ESTADISTICA PARA MEDIR LA CONFLICTIVIDAD SOCIAL A TRAVES DEL REGISTRO ARQUEOLOGICO (A Statistical Technique to Measure Social Conflict through the Archaeological Record

    Directory of Open Access Journals (Sweden)

    Pascual Izquierdo-Egea

    2015-03-01

    Full Text Available Se presenta aqui una tecnica estadistica para medir la conflictividad social a traves del registro mortuorio. Nace al amparo del metodo de valoracion contextual empleado en el analisis de los ajuares funerarios desde 1993. Se trata de una herramienta fundamental para el desarrollo de la arqueologia de los fenomenos sociales, cuyos relevantes resultados empiricos avalan su trascendencia teorica. Tras proceder a su conceptualizacion en funcion de la desigualdad social y la riqueza relativa, se explican las dos clases de conflictividad social definidas: estructural o estatica y coyuntural o dinamica. Finalmente, se incluyen sus conexiones con la ley demografica de Malthus a traves de sus dos parametros: poblacion y recursos. Todo este entramado teorico se ilustra con algunas aplicaciones referidas a las civilizaciones antiguas, abarcando la protohistoria iberica, la Mesoamerica prehispanica o la Roma altoimperial. ENGLISH: A statistical technique to measure social conflict through the mortuary record is presented here. It is born under the contextual valuation method used in the analysis of grave goods since 1993. This is a fundamental tool for the development of the archaeology of social phenomena, whose relevant empirical results support its theoretical significance. After conveying its conceptualization in terms of social inequality and relative wealth, the two classes of social conflict are explained: static or structural and dynamic or conjunctural. Finally, connections with the Malthusian demographic law through its two parameters—population and resources—are included. The synthesis of these theoretical frameworks is illustrated with applications to ancient civilizations, including Iberian protohistory, prehispanic Mesoamerica, and early imperial Rome.

  2. Identification of heavy metals sources in the Mexico city atmosphere, using the proton induced x-ray analytical technique and multifactorial statistics techniques; Identificacion de fuentes de metales pesados en la atmosfera de la Ciudad de Mexico, usando la tecnica de analisis por induccion de rayos X con proton y tecnicas estadisticas multifactoriales

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez M, B [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)

    1997-07-01

    The objectives of this work are: to identify the heavy metals present in the air, and its concentrations. To know the behavior from the polluting chemical elements to the long of an annual cycle corresponding to 1990, based on the concentrations of the same ones, obtained through the PIXE technique. To identify the suitable statistical methods to use to the data of metals concentration in form of total suspended particle (PST), found in this investigation. To relate the concentrations and the meteorological parameters considered to be able to suggest the possible pollution sources. In function of the obtained results, to serve as base to the decisions making and measures control that are planned by diverse institutions focused to the problem of the atmospheric pollution in the Metropolitan area of Mexico City (ZMCM). (Author)

  3. Enfermedades hereditarias monogénicas y multifactoriales

    OpenAIRE

    Cruz Cubas, Antonio

    2007-01-01

    En el lenguaje de la genética, es corriente distinguir según sus causas- dos grandes grupos de patologías hereditarias: las “monogénicas” y las “multifactoriales Las enfermedades monogénicas son provocadas por mutacion(es) génica(s) necesaria(s) y suficiente(s)

  4. L'elettronica nella tecnica aerospaziale

    Directory of Open Access Journals (Sweden)

    F. SALZA

    1963-06-01

    Full Text Available L'elettronica reca un contributo essenziale alla tecnica
    aerospaziale in ogni fase di qualsiasi sua realizzazione.
    In fase di progetto è fondamentale l'impiego del calcolo analogico o
    digitale, di quello analogico-digitale e delle tecniche di simulazione.
    Nel volo spaziale la guida e la stabilizzazione si basano sull'uso di
    sistemi elettronici che sono anche impiegati largamente nella essenziale fase
    di preparazione al volo.
    Così pure le comunicazioni coi passeggeri e le telemisure sono possibili
    soltanto grazie all'impiego delle tecniche più avanzate delle telecomunicazioni.
    Si esamina infine la situazione attuale per ciò che si riferisce al grado
    di affidamento delle apparecchiature elettroniche in conseguenza della loro
    crescente complessità: l'impiego di elementi allo stato solido e di adeguate
    tecniche circuitali consente di conservarlo ad un valore accettabile nonostante
    la crescente complicazione degli apparati in conseguenza delle sempre più
    gravi esigenze.

  5. Faculty Activity Analysis in the Universidad Tecnica Del Estado Campuses.

    Science.gov (United States)

    Karadima, Oscar

    An analysis of academic activities of college faculty at the eight campuses of Chile's Universidad Tecnica del Estado was conducted. Activities were grouped into seven categories: direct teaching, indirect teaching, research, community services, faculty development, academic administration, and other activities. Following the narrative…

  6. A FORTRAN program for the use of digital terrain elevation models of the Instituto Nacional de Estadistica, Geografia e Informatica of Mexico (INEGI); Programa en FORTRAN para el manejo de modelos digitales de elevacion del terreno del Instituto Nacional de Estadistica, Geografia e Informatica de Mexico (INEGI)

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Estrada, Gerardo [Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad, Morelia (Mexico)

    1996-09-01

    A FORTRAN program is presented for the use of digital terrain elevation models with raster format of the Instituto Nacional de Estadistica, Geografia e Informatica of Mexico (INEGI). This program allows the selection of a data window that can be delimited, optionally, giving the extreme coordinates in degrees, minutes and seconds or in UTM (Universal Transversal Mercator) coordinates. Digital terrain data are selected to produce an output file in SURFER binary grid format with decimal degrees coordinates. Optionally an x, y, z output file in ASCII code permits the griding with commercial software to produce a map with planar rectangular coordinates. During the window selection a simple filtering process is performed to diminish numerical errors of the original file, and if it is wanted, an undersampling can be conducted to prepare less detailed maps of great coverage. This program has been extensively tested in the Gerencia de Proyectos Geotermoelectricos de la Comision federal de Electricidad (CFE) in Mexico, where it is used to prepare base maps, automatically traced topographic profiles and boundary condition for thermal modelling. Another direct uses are the calculus of terrain and isostatic corrections for gravity studies, topographic height estimating based on known horizontal coordinates, climatic effects modelling, automatic calculus of material volumes and many more. [Espanol] Se presenta un programa FORTRAN para el uso de modelos digitales de elevacion del terreno con el formato raster del Instituto Nacional de Estadistica, Geografia e Informatica de Mexico (INEGI). El programa permite la seleccion de una ventana de datos, la cual puede elegirse optativamente dando las coordenadas extremas en coordenadas geograficas en grados, minutos y segundos o en coordenadas UTM (proyeccion Universal Transversa de Mercator). Se seleccionan los datos del modelo digital y se produce una rejilla lista para su despliegue en formato binario UTM cuyo enrejillado permite

  7. Improvement of Leukemia diagnose with molecular techniques; Mejoran diagnostico de leucemias con tecnicas moleculares

    Energy Technology Data Exchange (ETDEWEB)

    Campos Rudin, M E

    1997-07-01

    The objective of this study was to contribute with new techniques to the clinical diagnosis and to the monitoring of mycloid chronic leukemias in Costa Rica. The same one achieved to determine that is viable to apply radioactive and non reactive methodologies, for the molecular detection of the Philadelphia chromosome.It also found that the application of techniques of cellular biology, helps to classify better the mycloide leukemias and the chronic mycloproliferatives and miclodisplaced disorders. (S. Grainger) [Spanish] El objetivode este estudio fue el de aportar nuevas tecnicas al diagnostico clinico y monitoreo de las leucemias micloides cronicas en Costa Rica. El mismo logro determinar que es viable aplicar metodologias radioactivas y no radioactivas, para la deteccion molecular del cromosoma Filadelfia. Tambien encontro que la aplicacion de tecnicas de biologia celular, ayudan a clasificar mejor las leucemias mieloides y los desordenes cronicos micloproliferativos y myclodisplacicos. (S. Grainger)

  8. Estimated losses of energy in a power system using a semi-statistical methodology; Estimacion de perdidas de energia en un sistema electrico de potencia mediante una metodologia semi-estadistica

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Martinez, D [Centro Universitario UAEM, Valle de Teotihuacan (Mexico)]. E-mail: david_2mtz@hotmail.com; Martinez Lendech, J.F [Instituto Tecnologico de Estudios Superiores del Oriente del Estado de Hidalgo (Mexico)]. E-mail: mrtzlendech@hotmail.com; Garcia Herrera, C; Olvera Ricano, J.G. [Centro Universitario UAEM, Valle de Teotihuacan (Mexico)]. E-mails: cozobi_garcia@yahoo.com.mx; jgolverar@uaemex.mx

    2013-03-15

    Determination of electrical losses is one of the most important tasks for any enterprise dedicated to generation, transmission, transformation and/or distribution of electric energy. Any enterprise dedicated to these activities does continuously energy balances in order to estimate whole electrical losses of specific processes. However, it is necessary to classify the whole electrical losses into technical and non-technical losses. This paper presents a proposal for estimating technical and non-technical losses in an electrical power system. [Spanish] La determinacion de las perdidas de energia electrica es una de las labores mas importantes en cualquier empresa dedicada a la generacion, transmision, transformacion y/o distribucion de energia electrica. Es indudable que toda empresa dedicada a cualquiera de las actividades mencionadas anteriormente realiza periodicamente balances de energia que permiten estimar el valor de las perdidas totales de energia del proceso considerado. No obstante, para poder realizar un mejor analisis de la problematica de las perdidas de energia, es necesario separar el valor total de perdidas obtenido mediante un balance de energia, en perdidas tecnicas y perdidas no tecnicas. El presente trabajo presenta una propuesta para la estimacion de perdidas tecnicas y no tecnicas en un sistema electrico de potencia.

  9. Analytic techniques to quantify Tetrachlorohydroquinone and Chloranil; Tecnicas analiticas para cuantificar Tetraclorohidroquinona y Cloranilo

    Energy Technology Data Exchange (ETDEWEB)

    Castillo Escobedo, Ma. Teresa; Gutierrez de Gonzalez, Luz Ma; Gojon Zorrilla, Gabriel [Universidad Autonoma de Nuevo Leon, Monterrey, Nuevo Leon (Mexico)

    1995-02-01

    Tetrachlorohydroquinone (TCHQ) was determined by two methods: iodometry and cerimetry. Tritation with aqueous ceric ammonium sulphate using potentiometric end-point detection proved to be the method of choice on account of its coefficient of variation (CV=0.475%) and its excellent accuracy. Chloranil (TCQ) was quantified by titration with aqueous ascorbic acid in acetone-water-hexamethylene tetramine (HMT), the golden-yellow color of the TCQ-HMT complex disappearing at the end point. This method is accurate and has CV=0.396%. [Spanish] Se cuantifico la tetraclorohidroquinona (TCHQ) mediante una tecnica yodometrica y un metodo potenciometrico, basado en el uso de sulfato cerico amoniacal. Se concluyo que el metodo potenciometrico es el mejor, ya que tiene un coeficiente de variacion (CV) de 0.475%, y una exactitud muy aceptable. Se desarrollo un tecnica para cuantificar el Cloranilo (TCQ) por titulacion con Acido Ascorbico en presencia de Hexametilentetramina (HMT) en medio acetona-agua; el punto final se determino por la separacion del color amarillo oro del complejo TCQ-HMT. Esta tecnica presenta un coeficiente de variacion (CV) de 0.396% y una exactitud aceptable. Se realizaron pruebas de hipotesis para verificar la exactitud de los metodos elegidos.

  10. Strategic Planning for Institutions of Higher Education: A Content Analysis for the Universidad Tecnica del Estado Planning System.

    Science.gov (United States)

    Karadima, Oscar

    Ten-year development plans of each of the eight campuses of the Universidad de Santiago de Chile, formerly called Universidad Tecnica del Estado, are evaluated, using content analysis. In addition to narrative descriptions, diagrams illustrate the features of each plan, which covers the period 1983-1993. Topics covered by the plans were grouped…

  11. Reconocimiento automa?tico a trave?s de visio?n artificial, correlacio?n estadi?stica y Matlab aplicado a las matri?culas de vehi?culos

    OpenAIRE

    Barcia, Orlando

    2014-01-01

    Existen muchas investigaciones sobre el reconocimiento de caracteres e ima?genes utilizando diferentes me?todos tales como redes neuronales, me?todos estructurales, basados en la apariencia y otros (Pajares Martinsanz & De La Cruz Garci?a, 2008a). El problema es el reconocimiento automa?tico de caracteres en las placas o matri?culas de los vehi?culos del Ecuador. El trabajo innova en la aplicacio?n de las te?cnicas de visio?n artificial, adaptando el reconocimiento de las matri?culas de los v...

  12. Techniques for contact and contact with friction problems; Tecnicas para problemas de contacto y contacto con friccion

    Energy Technology Data Exchange (ETDEWEB)

    Velandia Arana, Gonzalo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    Different numerical techniques are presented based in the finite element method to obtain numerical solutions to contact and contact with friction problems between solid bodies, and compared between each other. [Espanol] Se presentan diferentes tecnicas numericas basadas en el metodo de elementos finitos para la obtencion de soluciones numericas de problemas de contacto y contacto con friccion entre cuerpos solidos, y se comparan entre si.

  13. Techniques for contact and contact with friction problems; Tecnicas para problemas de contacto y contacto con friccion

    Energy Technology Data Exchange (ETDEWEB)

    Velandia Arana, Gonzalo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    Different numerical techniques are presented based in the finite element method to obtain numerical solutions to contact and contact with friction problems between solid bodies, and compared between each other. [Espanol] Se presentan diferentes tecnicas numericas basadas en el metodo de elementos finitos para la obtencion de soluciones numericas de problemas de contacto y contacto con friccion entre cuerpos solidos, y se comparan entre si.

  14. Aquaculture investigations with nuclear energy techniques; Investigaciones acuicolas con tecnicas de energia nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Heredia Salazar, Brunilda [Fondo Nacional de Investigaciones Agropecuarias (FONAIAP), (CIAE), Estacion Experimental Guanapito, Guarico (Venezuela)

    1997-07-01

    acuaticos y especialmente de peces bajo condiciones controladas hasta su cosecha, procesamiento, comercializacion y consumo ha sido senalado como una actividad que produce numerosos beneficios, entre los que destacan la obtencion de alimento de alto valor proteico, la incorporacion a la economia de tierras no aptas para la agricultura, el incremento de los recursos pesqueros, el reciclaje de materia organica producida en las unidades, el desarrollo regional, la generacion de empleos, tecnologias y divisas. Se identifican varias areas de investigacion que pueden ser desarrolladas, utilizando las tecnologias nucleares, como por ejemplo en la reproduccion, nutricion, diagnostico y control de enfermedades, monitoreo ambiental y certificacion de la calidad de productos. En lo concerniente a nuestra acuicultura, se requieren investigaciones que ameritan el uso de estas tecnicas. Por ejemplo: 1) Produccion de agentes inductores autoctonos, mediante radioinmunoensayos (RIA) para determinar la actividad de las gonadotropinas provenientes de las hipofisis de los peces cultivados con la finalidad de recolectar las glandulas en el momento optimo, desencadenantes de la maduracion final y desove en especies autoctonas. 2) Mejoramiento genetico de especies cultivadas a traves del conocimiento de la carga genetica de diferentes lineas y razas encontradas en el medio natural y lograr su mantenimiento para resolver los problemas de endogamia, tanto en especies autoctonas como exoticas, con el uso de tecnicas de marcaje del ADE, RFLA y tecnicas de microsatelites. 3) Estudios nutricionales y de alimentacion de las especies sometidas a cultivo comercial, especialmente sobre el efecto de las aflatoxinas sobre los insumos o la racion, sustancias que influyen negativamente en la nutricion acuicola. En este caso se usan inmunoensayos competitivos de enzimas ligadas (ELISA) y radioinmunoensayos. 4) Diagnostico de enfermedades, mediante el kit ELISA, especificamente de las enfermedades mas comunes

  15. Diagnosis technique for the detection of mechanical faults in power breakers; Tecnica de diagnostico para la deteccion de fallas mecanicas en interruptores de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Linan, Roberto; Perez, Marciano; Estrada, J. Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This article reports a non-invasive diagnosis technique for the detection of mechanical faults in power breakers, supporting it with the recording and analysis of vibration signals of the equipment under test. Also, an assessment of four breakers using this technique is presented. [Espanol] En el presente articulo se reporta una tecnica de diagnostico no invasiva para detectar fallas mecanicas en interruptores de potencia, apoyandose en el registro y analisis de senales de vibracion del equipo bajo prueba. Asimismo, se presenta la evaluacion de cuatro interruptores usando esta tecnica.

  16. Diagnosis technique for the detection of mechanical faults in power breakers; Tecnica de diagnostico para la deteccion de fallas mecanicas en interruptores de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Linan, Roberto; Perez, Marciano; Estrada, J Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    This article reports a non-invasive diagnosis technique for the detection of mechanical faults in power breakers, supporting it with the recording and analysis of vibration signals of the equipment under test. Also, an assessment of four breakers using this technique is presented. [Espanol] En el presente articulo se reporta una tecnica de diagnostico no invasiva para detectar fallas mecanicas en interruptores de potencia, apoyandose en el registro y analisis de senales de vibracion del equipo bajo prueba. Asimismo, se presenta la evaluacion de cuatro interruptores usando esta tecnica.

  17. Techniques of thermal energy conservation; Tecnicas de conservacion de la energia termica

    Energy Technology Data Exchange (ETDEWEB)

    Caltenco Estevez, Juan Luis; Roblez Lopez, Francisco; Ceballos Serna, Andres Alberto [Instituto Mexicano del Petroleo (Mexico)

    1996-07-01

    In modern industry the thermal energy is the energy more intensely used, which implies that in the processes and equipment that operate based on it, rely the greatest opportunities for saving . In this paper some saving and conservation techniques of thermal energy, which nowadays have been developed, are presented, whose application has helped to the successful attainment of the objectives of increased productivity of industrial plants, with the additional benefit of reducing the environmental impact of the production activities. [Spanish] En la industria moderna la energia termica es la forma de energia mas intensamente utilizada, lo cual implica que en los procesos y equipos que operan basandose en esta, residan las mayores oportunidades de ahorro. En este trabajo se presentan algunas de las tecnicas de ahorro y conservacion de energia termica, que hoy en dia se han desarrollado, cuya aplicacion ha coadyuvado a la consecucion exitosa de los objetivos de incremento de la productividad de plantas industriales, con el beneficio adicional de reducir el impacto ambiental de las actividades productivas.

  18. Application techniques of coatings by thermal projection; Tecnicas de aplicacion de recubrimientos por proyeccion termica

    Energy Technology Data Exchange (ETDEWEB)

    Porcayo Calderon, Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    The coatings applied by thermal projection have an important number of applications in different industries (chemical, oil, electric, nuclear, etc.). The main purpose of the protection by means of coatings is to alter the surface characteristics of a component so as to resist corrosive environments, abrasion and erosion, among others. The coatings can be applied by different methods, but due to the fact that its characteristics appreciably differ from the base metal, it is important the knowledge of its properties when a coating is selected for a specific use. In this article the characteristics of the applied coatings by thermal projection, the factors that affect its performance and the principal application techniques, are described. [Espanol] Los recubrimientos aplicados por proyeccion termica tienen un numero importante de aplicaciones en diferentes industrias (quimica, petrolera, electrica, nuclear, etc.). El proposito principal de la proteccion por medio de recubrimientos es alterar las caracteristicas de la superficie de un componente de manera que resista ambientes corrosivos, abrasion y erosion, entre otros. Los recubrimientos pueden aplicarse por diferentes metodos, pero debido a que sus propiedades difieren apreciablemente de las del metal base, es importante el conocimiento de sus propiedades cuando se selecciona un recubrimiento para un uso especifico. En este articulo se describen las caracteristicas de los recubrimientos aplicados por proyeccion termica, los factores que afectan su desempeno y las principales tecnicas de aplicacion.

  19. Application techniques of coatings by thermal projection; Tecnicas de aplicacion de recubrimientos por proyeccion termica

    Energy Technology Data Exchange (ETDEWEB)

    Porcayo Calderon, Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The coatings applied by thermal projection have an important number of applications in different industries (chemical, oil, electric, nuclear, etc.). The main purpose of the protection by means of coatings is to alter the surface characteristics of a component so as to resist corrosive environments, abrasion and erosion, among others. The coatings can be applied by different methods, but due to the fact that its characteristics appreciably differ from the base metal, it is important the knowledge of its properties when a coating is selected for a specific use. In this article the characteristics of the applied coatings by thermal projection, the factors that affect its performance and the principal application techniques, are described. [Espanol] Los recubrimientos aplicados por proyeccion termica tienen un numero importante de aplicaciones en diferentes industrias (quimica, petrolera, electrica, nuclear, etc.). El proposito principal de la proteccion por medio de recubrimientos es alterar las caracteristicas de la superficie de un componente de manera que resista ambientes corrosivos, abrasion y erosion, entre otros. Los recubrimientos pueden aplicarse por diferentes metodos, pero debido a que sus propiedades difieren apreciablemente de las del metal base, es importante el conocimiento de sus propiedades cuando se selecciona un recubrimiento para un uso especifico. En este articulo se describen las caracteristicas de los recubrimientos aplicados por proyeccion termica, los factores que afectan su desempeno y las principales tecnicas de aplicacion.

  20. Modern techniques for the emissions control in thermal electric stations; Tecnicas modernas para el control de emisiones en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Romo Millares, C. A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    This paper presents the techniques and the control equipment for emissions in thermal stations that have the highest possibilities of being considered in the immediate future in the national energy panorama and the established frame for the environmental normativity. The pollutant compounds subject to revision are the nitrogen and sulfur oxides and unburned particles. [Espanol] Se presentan las tecnicas y equipos de control de emisiones para centrales termoelectricas que tienen mayores posibilidades de ser consideradas en el futuro inmediato dentro del panorama energetico nacional y el marco establecido por la normatividad ambiental. Los compuestos contaminantes sujetos a revision son los oxidos de nitrogeno y azufre y las particulas inquemadas.

  1. Modern techniques for the emissions control in thermal electric stations; Tecnicas modernas para el control de emisiones en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Romo Millares, C A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This paper presents the techniques and the control equipment for emissions in thermal stations that have the highest possibilities of being considered in the immediate future in the national energy panorama and the established frame for the environmental normativity. The pollutant compounds subject to revision are the nitrogen and sulfur oxides and unburned particles. [Espanol] Se presentan las tecnicas y equipos de control de emisiones para centrales termoelectricas que tienen mayores posibilidades de ser consideradas en el futuro inmediato dentro del panorama energetico nacional y el marco establecido por la normatividad ambiental. Los compuestos contaminantes sujetos a revision son los oxidos de nitrogeno y azufre y las particulas inquemadas.

  2. La scrittura è antiquata. Una prospettiva ermeneutica sulla genesi e destino del grafismo nell'epoca della tecnica

    Directory of Open Access Journals (Sweden)

    Lorenzo De Stefano

    2014-12-01

    Partendo dalle tesi di McLuhan e di André Leroi-Gourhan secondo cui la storia dell'evoluzione umana è la storia integrata delle tecniche e dei linguaggi rapportata alle prospettive filosofiche sulla tecnica di Günther Anders, Arnold Gehlen e Martin Heidegger, si analizzano i mutamenti antropologici in relazione alle rivoluzioni mass mediali dalla comparsa del grafismo ai “mass media della terza ondata”. Sulla scorta di tali analisi, si prova infine a indagare e delineare una prospettiva etica della civiltà tecnologica in relazione al corretto uso e comprensione dei nuovi mass media.

  3. LIF characterization of ancient umber ceramics and frescos; Applicazione della tecnica LIF alle antiche ceramiche umbre e agli affreschi

    Energy Technology Data Exchange (ETDEWEB)

    Fantoni, R.; Palucci, A.; Ribezzo, S. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dipt. Innovazione; Borgia, I. [Perugia Univ., Perugia (Italy)

    1999-07-01

    The report shows the result carried out by the LIF (layer induced fluorescence) system developed for pigment analysis at ENEA (National Agency for New Technology, Energy and the Environment) Frascati research centre (Rome) . The frescos and ceramics by Umbria region (Italy) are analysed. [Italian] Vengono riportati i risultati ottenuti dall'indagine della fluorescenza indotta da laser su antiche ceramiche umbre e su affreschi. La tecnica e' stata anche utilizzata per determinare la fluorescenza dei pigmenti contenuti in campioni di affresco.

  4. Sacral-neuromodulation CT-guided; Nuova tecnica di centraggio TC-assistista nella neuromodulazione sacrale

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, Lamberto; Ricci, Stefano [INRCA, Ancona (Italy). Dipartimento di radiologia e medicina nucleare; Pelliccioni, Giuseppe; Scarpino, Osvaldo [INRCA, Ancona (Italy). Unita' operativa di radiologia; Ghiselli, Roberto; Saba, Vittorio [INRCA, Ancona (Italy). Dipartimento di chirurgia

    2005-04-01

    in una stimolazione temporanea attraverso un elettrocatetere posizionato mediante puntura percutanea nella radice sacrale S3 al fine di testare l'integrite anatomica della radice. Il test PNE ? eseguito normalmente sotto guida fluoroscopica. Questa tecnica pue se valida, pui presentare alcuni inconvenienti, quali l'esposizione radiogena per gli operatori, la mancata visualizzazione del foro sacrale per gli artefatti da gas colico e l'impossibilite di valutare correttamente la profondita e la sede d'impianto dell'elettrodo-stimolatore. Scopo del lavoro e stato quello di perimentare una tecnica alternativa utilizzando la guida TC al fine di valutarne vantaggi e un possibile uso routinario. Materiale e metodi: Abbiamo testato con PNE test in guida TC 30 pazienti (16 maschi e 14 femmine) affetti da gravi disfunzioni pelviche refrattari agli usuali regimi terapeutici. Ventisette pazienti presentavano una relativa integrit? anatomica del bacino e del sacro, 3 pazienti invece erano portatori du anomalie morfologiche dei forami sacrali. Si e proceduto all'identificazione dei fori sacrali mediante scansioni TC volumetriche, a paziente prono, utilizzando un apparecchio TC spirale dotato di una seconda consolle per le ricostruzioni tridimensionali. Identificata la sede dei forami S3, viene preparato il campo sterile e s'introduce l'ago verificandone la corretta posizione con una scansione TC di controllo. Si passa successivamente all'introduzionedell'elettrodo dopo avere verificato la corretta risposta contrattile muscolare e la precisa posizione con una ulteriore scansione TC. Risultati: Trenta pazienti sono stati sottoposti a PNE test sotto guida TC, per un totale di 38 centraggi. In 8 pazienti e stata eseguito il PNE test su entrambi i fori S3. Il forame sacrale e stato centrato al primo tentativo in 36/38 casi. In due casi sono stati necessari pi? tentativi per centrare correttamente il forame. In 4/30 pazienti e stato

  5. Determinacion del N y P en abonos organicos mediante la tecnica del elemento faltante y un bioensayo microbiano

    Directory of Open Access Journals (Sweden)

    Eduardo Salas

    2001-01-01

    Full Text Available Mediante la tecnica del elemento faltante en ferinvernadero y el uso de un bioensayo microbiano se determin6 la disponibilidad de N y P en 6 sus- greenhoutratos: suelo s6lo 0 en mezcla 9: 1 con diversos abo- nos organicos, a saber: pollinaza (CM, compost (C, bocashi (B, vermicompost (V 0 broza de ca- determife (Br. En ambos bioensayos y para cada sustrato se realiz6 un experimento factorial 2x2 (fertiliza- ci6n con P y N; las combinaciones resultantes fue- ron: +P, +N, +P+N y -P-N (testigo. En el bioensa- yo microbiano se utiliz6 un diseno de bloques al azar con 6 repeticiones y se midi6 el crecimiento microde la biomasa microbiana nativa (BM 2 dias des- pues de aplicar el tratamiento e incubar con gluco- sa. En la prueba de invernadero se utiliz6 un dise- no completamente al azar con 4 repeticiones, se utiliz6 sorgo (Sorghum vulgare como planta indi- cadora. Se midi6 el peso seco de la parte aerea de lasplantas a los 34 dias de la siembra (PS y el con- tenido foliar de nutrimentos. Ambos bioensayos in- sordicaron respuesta del suelo a la aplicaci6n de P y N. La mezcla del suelo con un 10% de CM, CoB mostraron los valores mas altos de BM y PS. La mezcla suelo:CM no respondi6 a ningun tratamien- to qufmico, mientras que en mezcla con el C 0 el B respondi6 a la aplicaci6n de N pero no al P. Con el Vola Br se obtuvo las menores respuestas de las variables y hubo respuesta ala adici6n de P y N. La tecnica del elemento faltante de invernadero

  6. Analysis methodology for economic technical feasibility studies in offshore electrical generation systems; Metodologia de analisis para estudios de factibilidad tecnica economica en sistemas de generacion electrica costa fuera

    Energy Technology Data Exchange (ETDEWEB)

    Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-07-01

    An analysis methodology followed in the development of technique-economic feasibility studies of systems of electrical generation in offshore electrical installations is presented, including the obtaining of the curves of the turbine and generator performance, the technical considerations for the formulation of the operation scenes and the calculations of the economic evaluation of a real scenario. [Spanish] Se muestra una metodologia de analisis seguida en el desarrollo de estudios de factibilidad tecnica-economica de sistemas de generacion electrica en instalaciones electricas costa fuera, incluyendo la obtencion de las curvas de comportamiento de la turbina y el generador, las consideraciones tecnicas para la formulacion de los escenarios de operacion y los calculos de la evaluacion economica de un escenario real.

  7. Foreseeing techniques and control of emissions in thermal power plants. Workshop Latin American. [Selected Papers]; Control y tecnicas de prevision de las emisiones de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Saldana, R.; Morales, F.; Urrutia, M. [eds.] [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    This document contains the conference proceedings of the Latin-American Workshop ``Control and Prevision Techniques of Emissions in Power Plants`` carried out in Cuernavaca, Mexico on June 1996, with the participation of representatives of Argentina, Chile, Guatemala, Colombia, Ecuador, Mexico, Nicaragua, Panama and Venezuela, as well as specialists from the European Union. The core issue analyzed in this workshop was the control and the evaluation techniques of polluting emissions in Power Plants [Espanol] Este documento contiene las memorias de conferencia del Taller Latinoamericano ``Control y tecnicas de prevision de las emisiones de centrales termoelectricas`` que se llevo a cabo en Cuernavaca, Mexico en junio de 1996. Participaron representantes de Argentina, Chile, Guatemala, Colombia, Ecuador, Mexico, Nicaragua, Panama y Venezuela, asi como especialistas de la Union Europea. El tema central tratado en este taller fue el control y tecnicas de evaluacion de las emisiones contaminantes en centrales termoelectricas

  8. Foreseeing techniques and control of emissions in thermal power plants. Workshop Latin American. [Selected Papers]; Control y tecnicas de prevision de las emisiones de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Saldana, R; Morales, F; Urrutia, M [eds.; Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    This document contains the conference proceedings of the Latin-American Workshop ``Control and Prevision Techniques of Emissions in Power Plants`` carried out in Cuernavaca, Mexico on June 1996, with the participation of representatives of Argentina, Chile, Guatemala, Colombia, Ecuador, Mexico, Nicaragua, Panama and Venezuela, as well as specialists from the European Union. The core issue analyzed in this workshop was the control and the evaluation techniques of polluting emissions in Power Plants [Espanol] Este documento contiene las memorias de conferencia del Taller Latinoamericano ``Control y tecnicas de prevision de las emisiones de centrales termoelectricas`` que se llevo a cabo en Cuernavaca, Mexico en junio de 1996. Participaron representantes de Argentina, Chile, Guatemala, Colombia, Ecuador, Mexico, Nicaragua, Panama y Venezuela, asi como especialistas de la Union Europea. El tema central tratado en este taller fue el control y tecnicas de evaluacion de las emisiones contaminantes en centrales termoelectricas

  9. Electrochemical techniques application in corrosion problems of fossil power plants; Aplicacion de tecnicas electroquimicas en problemas de corrosion en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Cano Castillo, Ulises; Garcia Ochoa, Esteban Miguel; Martinez Villafane, Alberto; Mariaca Rodriguez, Liboria; Malo Tamayo, Jose Maria; Uruchurtu Chavarin, Jorge [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    Some aspects of the electrochemical techniques employed to evaluate the corrosion at low temperature in fossil power plants are commented, as well as the results obtained with the application of them in three power plants of this type. [Espanol] Se comentan algunos aspectos de tecnicas electroquimicas utilizadas para evaluar la corrosion en baja temperatura en centrales termoelectricas, asi como los resultados de la aplicacion de las mismas en tres centrales de este tipo.

  10. Electrochemical techniques application in corrosion problems of fossil power plants; Aplicacion de tecnicas electroquimicas en problemas de corrosion en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Cano Castillo, Ulises; Garcia Ochoa, Esteban Miguel; Martinez Villafane, Alberto; Mariaca Rodriguez, Liboria; Malo Tamayo, Jose Maria; Uruchurtu Chavarin, Jorge [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1991-12-31

    Some aspects of the electrochemical techniques employed to evaluate the corrosion at low temperature in fossil power plants are commented, as well as the results obtained with the application of them in three power plants of this type. [Espanol] Se comentan algunos aspectos de tecnicas electroquimicas utilizadas para evaluar la corrosion en baja temperatura en centrales termoelectricas, asi como los resultados de la aplicacion de las mismas en tres centrales de este tipo.

  11. Energy Statistics Manual; Manual de Estadisticas Energeticas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    Detailed, complete, timely and reliable statistics are essential to monitor the energy situation at a country level as well as at an international level. Energy statistics on supply, trade, stocks, transformation and demand are indeed the basis for any sound energy policy decision. For instance, the market of oil -- which is the largest traded commodity worldwide -- needs to be closely monitored in order for all market players to know at any time what is produced, traded, stocked and consumed and by whom. In view of the role and importance of energy in world development, one would expect that basic energy information to be readily available and reliable. This is not always the case and one can even observe a decline in the quality, coverage and timeliness of energy statistics over the last few years.

  12. Comprender las bases de la estadistica

    Directory of Open Access Journals (Sweden)

    Badii, M.H.

    2008-07-01

    Full Text Available Simple fundamental basics of statistics are briefly described. The historical origin and the necessity to understand statistics are noted. An especial emphasis is placed upon some aspects such as collection, analysis, synthesis, statistical phases and decision making in dealing with statistics.

  13. Estadisticas Culturales de Colombia: febrero de 1964

    Directory of Open Access Journals (Sweden)

    Fernán Torres León

    1964-02-01

    Full Text Available El documento presenta un cuadro comparativo de las actividades culturales del país, así como las exposiciones de artes plásticas y otras inauguradas, recitales poéticos, conciertos y recitales de música, libros de autores colombianos publicados y representaciones teatrales realizadas en el país en el mes de febrero de 1964

  14. Technical Cooperation Report for 2004. Report by the Director General; Informe de Cooperacion Tecnica para 2004. Informe del Director General

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-08-15

    than $10 million for the second year in a row. This provided support to 17% of the approved footnote-a/ programme for 2004. In addition, receipt in 2004 of $8.1 million against earlier target years allowed the Secretariat to reinstate, during the second quarter of the year, programme budgets which had been curtailed as a result of the lower than expected resources received in 2003. During the year, the Secretariat has been heavily involved in a review of TC processes, with a view to streamline and strengthen them. The main part of the change process is planned to be completed in 2005. While the implementation rate for the programme dropped four percentage points to 68%, compared with 2003, the total disbursements for the programme in 2004 were slightly higher than in 2003 by nearly $120 000. A further challenge to the programme has been the replacement of assessed programme costs with national participation costs as approved by the Board of Governors in 2004. (author) [Spanish] En el Informe de cooperacion tecnica para 2004 se destacan las actividades y los logros del programa de cooperacion tecnica en el ultimo ano. Durante 2004, la Secretaria ultimo el programa de cooperacion tecnica para el bienio 2005-2006 que la Junta de Gobernadores aprobo en noviembre de 2004. En relacion con el programa para 2005-2006, se llevo a cabo un proceso revisado de evaluacion de los proyectos que aporto informacion adicional en cuanto al compromiso de los gobiernos, las capacidades nacionales, los indicadores de ejecucion de los proyectos y los resultados de esos proyectos. En el bienio 2005-2006 se incluye un programa fortalecido de mejoramiento de la infraestructura de proteccion radiologica. La Secretaria utilizo la experiencia acumulada en los ultimos diez anos, asi como las conclusiones de las evaluaciones, para crear un programa que se basase en los exitos y las ensenanzas deducidas a fin de garantizar el uso seguro de la tecnologia nuclear en el marco de infraestructuras

  15. Techniques Which Aid in Quantitative Interpretation of Scan Data; Methodes Facilitant l'Interpretation Quantitative des Scintigrammes; Metody, oblegchayushchie kolichestvennuyu interpretatsiyu dannykh skennirovaniya; Tecnicas Que Facilitan la Interpretacion Cuantitativa de los Datos Centelleograficos

    Energy Technology Data Exchange (ETDEWEB)

    Charleston, D. B.; Beck, R. N.; Eidelberg, P.; Schuh, M. W. [Argonne Cancer Research Hospital, Chicago, IL (United States)

    1964-10-15

    multiescalfmetro, permite acumular la informacion numerica para obtener para cada escalon del fndice una presentacion segun el 'recuento total por linea de exploracion'. Por este procedimiento se han explorado animales pequenos y se ha obtenido una medicion cuantitativa exacta de la distribucion de la actividad en todo el animal y un perfil de actividad similar al que se obtiene al emplear un sistema de exploracion lineal mediante rendija. Esa tecnica multiescalimetrica se completa acumulando informacion numerica para presentarla en forma de 'cuentas por unidad de superficie'. Se obtiene un perfil para cada lfnea de exploracion correspondiente a cada escalon del indice y el conjunto de estos perfiles permite construir el diagrama tridimensional del fndice de recuento en aquella area. Los autores han explorado un simulador con un detector unico. Empleando lecturas multiples han obtenido en identicas condiciones estadisticas representaciones centelleograficas con o sin acentuacion del contraste y con o sin retardo en el circuito integrador, y centelleogramas de puntos de diversas formas y tamanos. La comparacion directa de las representaciones combinada con el trazado de un grafico de 'cuentas por unidad de superficie' ayuda a interpretar los resultados de la exploracion. Al registro de los datos deben anadirse informaciones exactas sobre la posicion. El sistema de exploracion del cerebro del Argonne Cancer Research Hospital permite calcular las diferencias percentuales de actividad en las regiones de interes situadas en lados opuestos de la cabeza, a partir de los datos reunidos por multiescalimetria. (author) [Russian] V nastojashhem doklade obsuzhdaetsja rjad metodov, oblegchajushhih ocenku i interpretaciju dannyh skennirovanija. Jetot rjad prostiraetsja ot prostoj vnutrennej kalibrovki dlja rasshifrovki fotoplenok do dovol'no slozhnogo vspomogatel'nogo oborudovanija dlja predstavlenija nakoplennyh cifrovyh dannyh skennirovanija v vide, prigodnom dlja sostavlenija programm dlja

  16. Measurement and control techniques for electric equipment development; Tecnicas de medicion y control para el desarrollo de equipos electricos

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    In broad outlines the measuring and control techniques that are used in the electric equipment development in the short circuit laboratories, are described. In this article the utilization criteria of the traditional and modern (analogical and digital) instruments are described as well as the tendency towards the system`s integration for the automation of the measurement and control processes. Also, mention is made of the systems currently being developed at the Instituto de Investigaciones Electricas (IIE) to be applied at the Short Circuit Laboratories of Comision Federal de Electricidad (CFE) and of the IIE. [Espanol] Se describen a grandes rasgos las tecnicas de medicion y control que se emplean para el desarrollo de equipos electricos en los laboratorios de corto circuito. En este articulo se describen los criterios de utilizacion de los instrumentos tradicionales y modernos (analogicos y digitales), asi como la tendencia hacia la integracion de sistemas para la automatizacion de los procesos de medicion y control. Tambien se mencionan los sistemas que actualmente se desarrollan en el Instituto de Investigaciones Electricas (IIE) para aplicarlos en los Laboratorios de Corto Circuito de la Comision Federal de Electricidad (CFE) y del Instituto.

  17. Measurement and control techniques for electric equipment development; Tecnicas de medicion y control para el desarrollo de equipos electricos

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    In broad outlines the measuring and control techniques that are used in the electric equipment development in the short circuit laboratories, are described. In this article the utilization criteria of the traditional and modern (analogical and digital) instruments are described as well as the tendency towards the system`s integration for the automation of the measurement and control processes. Also, mention is made of the systems currently being developed at the Instituto de Investigaciones Electricas (IIE) to be applied at the Short Circuit Laboratories of Comision Federal de Electricidad (CFE) and of the IIE. [Espanol] Se describen a grandes rasgos las tecnicas de medicion y control que se emplean para el desarrollo de equipos electricos en los laboratorios de corto circuito. En este articulo se describen los criterios de utilizacion de los instrumentos tradicionales y modernos (analogicos y digitales), asi como la tendencia hacia la integracion de sistemas para la automatizacion de los procesos de medicion y control. Tambien se mencionan los sistemas que actualmente se desarrollan en el Instituto de Investigaciones Electricas (IIE) para aplicarlos en los Laboratorios de Corto Circuito de la Comision Federal de Electricidad (CFE) y del Instituto.

  18. Ion nitriding post-oxidation as an alternative technique to electrolytic chromium; Nitruracion post-oxidacion ionica como tecnica alternativa al cromado electrolitico

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Guillen, J. C.; Granda-Gutierrez, E.E.; Campa-Castilla, A.; Perez-Aguilar, S.I.; Garza-Gomez, A.; Candelas-Ramirez, J.; Mendez-Mendez, R. [COMIMSA. Corporacion Mexicana de Investigacion en Materiales S.A. de C.V., Saltillo, Coahuila (Mexico)]. E-mail: jcarlos@comimsa.com

    2010-11-15

    The effect of temperature and processing time during post-oxidation on hardness and corrosion resistance of AISI 1045 samples treated through nitriding and post-oxidation in a pulsed plasma discharge is evaluated in this paper. Also, a comparative analysis of the mechanical properties obtained with the dual nitriding - post oxidation process versus those properties of typical hard chrome coatings was performed with an aim to propose an alternative technique to the processes of galvanic coatings. The latter revealed that the process of ion nitriding and post-oxidation provides similar properties in hardness and improves the corrosion resistance compared to the hard chrome case. It is conclude that the technique of ion nitriding and post-oxidation is a non environmental harmful technology with strong potential to replace highly polluting electroplating techniques for application of hard chrome coatings. [Spanish] En el presente trabajo se evalua el efecto del tiempo y la temperatura de post-oxidacion sobre las propiedades de dureza y resistencia a la corrosion de muestras de acero AISI 1045 sometido al proceso de nitruracion post-oxidacion ionica en plasmas pulsados. Asi mismo, con el objetivo de fundamentar la propuesta de utilizacion de la nitruracion post-oxidacion ionica como una tecnica alternativa a los procesos galvanicos para aplicacion de recubrimientos de cromo duro, se realizo un analisis comparativo de propiedades, evidenciando que, mediante el proceso nitruracion postoxidacion ionica, es posible obtener caracteristicas similares en dureza y mejores en resistencia a la corrosion que las tipicas obtenidas para el cromo duro. Los resultados obtenidos permiten postular una tecnica que no dana al medio ambiente, como lo es la nitruracion post-oxidacion ionica, como candidata potencial para sustituir las tecnicas galvanicas altamente contaminantes para aplicacion de cromo duro.

  19. A high sensibility technique to detect the incipient defects in high tension bushings; Una tecnica de alta sensibilidad para detectar defectos incipientes en boquillas de alta tension

    Energy Technology Data Exchange (ETDEWEB)

    Robles Pimentel, Edgar; Mestizo Rivera, Antolin; Romero Camberos, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    In this article a testing technique to locate incipient faults in transformer bushings is reported, specifically the one related to the internal disconnection of the capacitive tap, which is exemplified with a device having a problem of this kind. [Espanol] En el presente articulo se reporta una tecnica de prueba para localizar fallas incipientes en las boquillas de los transformadores, especificamente la relacionada con la desconexion interna del tap capacitivo, lo cual se ejemplifica con un dispositivo que padece un problema de ese tipo.

  20. A high sensibility technique to detect the incipient defects in high tension bushings; Una tecnica de alta sensibilidad para detectar defectos incipientes en boquillas de alta tension

    Energy Technology Data Exchange (ETDEWEB)

    Robles Pimentel, Edgar; Mestizo Rivera, Antolin; Romero Camberos, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    In this article a testing technique to locate incipient faults in transformer bushings is reported, specifically the one related to the internal disconnection of the capacitive tap, which is exemplified with a device having a problem of this kind. [Espanol] En el presente articulo se reporta una tecnica de prueba para localizar fallas incipientes en las boquillas de los transformadores, especificamente la relacionada con la desconexion interna del tap capacitivo, lo cual se ejemplifica con un dispositivo que padece un problema de ese tipo.

  1. Technical Cooperation Report for 2006. Report by the Director General; Informe de Cooperacion Tecnica para 2006. Informe del Director General

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-15

    programme results. (author) [Spanish] En el periodo objeto de examen el programa de CT realizo importantes progresos. Los nuevos recursos alcanzaron una cota maxima sin precedentes de 101,0 millones de dolares; de ellos, 76,8 millones fueron para el Fondo de Cooperacion Tecnica y se recibieron 22,3 millones como recursos extrapresupuestarios y 1,9 millones en contribuciones en especie. Las nuevas obligaciones netas durante el ano ascendieron a 104,5 millones de dolares, es decir, un incremento de mas del 30% con respecto a 2005. En 2007 se celebra el 50{sup o} aniversario del OIEA, lo que brinda la oportunidad de examinar retrospectivamente la historia de las actividades de CT. Al principio, el programa de 'asistencia tecnica', como entonces se denominaba, era modesto: en 1960 la Junta de Gobernadores aprobo 28 proyectos en 16 Estados Miembros. Con el tiempo, la demanda de asistencia y competencia tecnica del Organismo ha aumentado sin cesar: el programa de CT que la Junta de Gobernadores aprobo en 2006 constaba de mas de 780 proyectos en 115 Estados Miembros. En los ultimos anos se ha experimentado en varios paises del mundo un cambio de las posturas respecto de la energia nucleoelectrica. El origen de esta tendencia se puede remontar al rapido aumento de la demanda de energia a escala mundial, el mayor enfasis en la seguridad energetica y una mayor sensibilizacion en cuanto a los riesgos del cambio climatico. Como consecuencia de ello, esta aumentando el numero de solicitudes de proyectos de planificacion energetica, una de cuyas opciones es la energia nucleoelectrica. En 2006, la Secretaria elaboro y finalizo el programa de CT para el bienio 2007-2008 haciendo uso del Marco de gestion del ciclo del programa (PCMF) en estrecha colaboracion con las autoridades nacionales. El PCMF esta respaldado por un sitio web especial, que facilita la colaboracion entre los interesados directos de los Estados Miembros y la Secretaria. En consonancia con la Estrategia de CT, la

  2. Technical Cooperation Report for 2005. Report by the Director General; Informe de Cooperacion Tecnica para 2005. Informe del Director General

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-08-15

    identify how the changes in the structure of the Department and in the programming process will affect stakeholder satisfaction, the Department conducted surveys to establish a baseline for future assessments. The surveys targeted, inter alia, Member States, including National Liaison Officers, national coordinators, project counterparts and representatives at Missions in Vienna, and show that this grouping is satisfied overall with the programme. Financial indicators, including the value of the programme to be delivered, new resources, disbursements and new obligations for 2005 were all above 2004 levels. Extrabudgetary resources rose to a new record level of $14.9 million. Some $10.2 million of these resources were used to upgrade footnote-a/ projects or project components, providing funding for just under 25% of the approved footnote-a/ budgets. (author) [Spanish] En el Informe de cooperacion tecnica para 2005 se destacan las actividades y los logros del programa de cooperacion tecnica (CT) en el ultimo ano. En el documento tambien se exponen las novedades relacionadas con la gestion del programa y los asuntos financieros. La busqueda y el mantenimiento de asociados para el desarrollo siguio siendo una prioridad de la Secretaria. En 2005 la cooperacion con el Fondo para el Medio Ambiente Mundial del Programa de las Naciones Unidas para el Desarrollo prosiguio con un proyecto en Africa relacionado con la gestion del sistema de acuiferos de arenisca de Nubia. El programa de CT tambien esta desempenando una funcion importante en los programas financiados por conducto del Banco Mundial (proyecto del acuifero Guarani), el Banco Asiatico de Desarrollo (Iniciativa para un aire limpio en ciudades de Asia) y el Banco Africano de Desarrollo (proyecto de erradicacion de la mosca tsetse en la zona meridional del Valle del Rift, en Etiopia, y proyectos de lucha contra la mosca tsetse en otros paises). En las actividades del programa de CT durante 2005 se siguio prestando apoyo a los

  3. Advantages of the synthetic technique for the conduction of short circuit tests to breakers; Ventajas de la tecnica sintetica para realizar pruebas de corto circuito a interruptores

    Energy Technology Data Exchange (ETDEWEB)

    Sibilski, Henry [Instituto Electrotecnico de Varsovia, Varsovia (Poland); Ochoa Vivanco, Ruben [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    In this article the operational principle of the synthetic test is described; specifically of the current injection circuit in parallel. Its utilization in the research and development of new breaker models and its wide possibilities regarding its testing characteristics is outlined. Likewise the different tests that can be performed by means of the synthetic technique are described. Finally the importance of the synthetic tests is outlined for the development of own technology in the area of interruption equipment and emphasis is made that in industrialized countries this technique is of common practice. [Espanol] En este articulo se describe el principio de operacion de la prueba sintetica; especificamente del circuito de inyeccion de corriente en paralelo. Se destaca su utilizacion en la investigacion y desarrollo de nuevos modelos de interruptores y sus amplias posibilidades en cuanto a caracteristicas de prueba. Asimismo, se describen las diferentes pruebas que pueden realizarse mediante la tecnica sintetica. Por ultimo, se destaca la importancia de las pruebas sinteticas para el desarrollo de tecnologia propia en el area de equipos de interrupcion, y se hace notar que en paises desarrollados, esta tecnica es practica comun.

  4. Advantages of the synthetic technique for the conduction of short circuit tests to breakers; Ventajas de la tecnica sintetica para realizar pruebas de corto circuito a interruptores

    Energy Technology Data Exchange (ETDEWEB)

    Sibilski, Henry [Instituto Electrotecnico de Varsovia, Varsovia (Poland); Ochoa Vivanco, Ruben [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    In this article the operational principle of the synthetic test is described; specifically of the current injection circuit in parallel. Its utilization in the research and development of new breaker models and its wide possibilities regarding its testing characteristics is outlined. Likewise the different tests that can be performed by means of the synthetic technique are described. Finally the importance of the synthetic tests is outlined for the development of own technology in the area of interruption equipment and emphasis is made that in industrialized countries this technique is of common practice. [Espanol] En este articulo se describe el principio de operacion de la prueba sintetica; especificamente del circuito de inyeccion de corriente en paralelo. Se destaca su utilizacion en la investigacion y desarrollo de nuevos modelos de interruptores y sus amplias posibilidades en cuanto a caracteristicas de prueba. Asimismo, se describen las diferentes pruebas que pueden realizarse mediante la tecnica sintetica. Por ultimo, se destaca la importancia de las pruebas sinteticas para el desarrollo de tecnologia propia en el area de equipos de interrupcion, y se hace notar que en paises desarrollados, esta tecnica es practica comun.

  5. Technical Cooperation Report for 2007. Report by the Director General; Informe de Cooperacion Tecnica para 2007. Informe del Director General

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-08-15

    achievements in technical cooperation in each of the regions in 2007, describing regional emphases and responses to national priorities. As the Millennium Development Goals remain a key area of focus, the report demonstrates how the IAEA is making a contribution to global efforts to fight poverty, hunger and disease, as well as to support environmental sustainability and the health of mothers and children. Health in Asia was addressed in 2007, for example, through regional projects to train new medical staff, while in Europe, radiotherapy services were being upgraded in the Balkans. In Africa, projects on better animal health and improved crop productivity contributed to the fight against hunger, and in Latin America, activities in food fortification and the determination of vitamin deficiency helped to improve the health of mothers and children. Ensuring sustainable socioeconomic development in the future will depend on a reliable energy supply. Among the energy-related technical cooperation projects in Africa in 2007, support to energy planning helped to train national energy planning teams in Burkina Faso, Chad, Cote d'Ivoire, Mauritania and Niger. Assistance was also being provided to several African countries to help with the different stages of planning a nuclear power programme. In Asia and the Pacific, RCA Member States received support in the application of Agency-developed analytical tools for energy planning. In Latin America, energy security is seen as a priority issue. In 2007, the Agency provided assistance to the conversion of Europe's older research reactors from high to low enriched uranium. In Asia and the Pacific, the Agency provided advice on the development of nuclear power, based on the latest Agency guidelines and the document 'Milestones in the Development of a National Infrastructure for Nuclear Power'. (author) [Spanish] En la parte A de este documento se presenta una vision general de las actividades de cooperacion tecnica del 1 de abril de 2007 al

  6. Laser induced spectroscopy breakdown (LIBS) application to heavy metal detection in soils; Applicazioni della tecnica Laser induced breakdown spectroscopy (LIBS) alla determinazione dei metalli pesanti nei suoli

    Energy Technology Data Exchange (ETDEWEB)

    Barbini, R.; Fantoni, R.; Palucci, A.; Ribezzo, S.; Colao, F. [ENEA, Centro Ricerche Frascati, Frascati, RM (Italy). Div. Fisica Applicata; Capitelli, F. [Bari, Univ., Bari (Italy). Dipt. di Biologia e Chimica Agroforestale ed Ambientale

    2000-07-01

    and the sample upon which the analytic use of LIBS technique relays. RSD % (Relative Standard Deviation) for LIBS and ICP data have been compared. LIBS values appeared systematically higher than the ICP ones. Also the correlation coefficients, calculated as the ratio between certified value and experimental one, both for LIBS and ICP, were considerably less close to one for LIBS than for ICP. In order to minimize the matrix effect, a model for correcting LIBS data by taking into account the plasma temperature experimentally determined both in the unknown and in the standard sample was introduced. Preliminary results showed a considerable improvement in the correlation coefficients for corrected LIBS data. Once the model validity is proven for different elements used in the plasma temperature determination, which is possible once known all the parameters of Boltzmann equation for experimental intensity spectral line, it is quite general and can be applied on all the samples and for all the elements. [Italian] Il LIBS (Laser induced breakdown spectroscopy) e' una tecnica spettroscopica sperimentale che trova applicazione nell'analisi di campioni di interesse ambientale, quali suoli e rocce, ed industriali, come leghe metalliche. In questo rapporto sono presentati i risultati dell'applicazione della tecnica a campioni eterogenei di suoli certificati dal Joint Research Centre di Ispra (Varese) per la valutazione delle concentrazioni di metalli pesanti di interesse agronomico (Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn). Nella tecnica LIBS, un impulso laser d'alta potenza e' focalizzato sul campione in modo da provocare sulla superficie dello stesso un piccolo volume di plasma. Le emissioni delle singole specie atomiche sono raccolte da fibra ottica e analizzate da un monocromatore e da un analizzatore ottico (iCCD). Il riconoscimento e l'assegnazione delle emissioni spettrali corrispondenti ai singoli elementi atomici permette di riconoscere la

  7. Heat transfer coefficients obtainment by means of naphthalene sublimation in air; Obtencion de coeficientes de transferencia de calor por medio de la tecnica de sublimacion de naftalina en aire

    Energy Technology Data Exchange (ETDEWEB)

    Perez Galindo, Jose Arturo; Garcia Gutierrez, Alonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1986-12-31

    This work describes the experimental technique for the sublimation of naphthalene in air which measures heat transfer coefficients through the use of the analogy between the transference phenomena of heat and mass. The technique used to substitute the experimental measurements of heat transfer, in which it is difficult to control the border thermal conditions, when they are dimmed by the omnipresent problem of heat conduction through the walls of the transference surfaces. Two examples are included of the application technique and its potential is outlined. [Espanol] En este trabajo se describe la tecnica experimental de la sublimacion de naftalina en aire mediante la que se miden coeficientes de transferencia de masa. Los datos asi obtenidos pueden convertirse en coeficientes de transferencia de calor a traves del uso de la analogia entre los fenomenos de transferencia de calor y masa. La tecnica se utiliza para substituir las mediciones experimentales de transferencia de calor, en las que es dificil controlar las condiciones termicas de frontera, cuando las empana el problema omnipresente de la conduccion de calor a traves de las paredes de las superficies de transferencia. Se incluyen dos ejemplos de la aplicacion de la tecnica y se destaca su potencial.

  8. Heat transfer coefficients obtainment by means of naphthalene sublimation in air; Obtencion de coeficientes de transferencia de calor por medio de la tecnica de sublimacion de naftalina en aire

    Energy Technology Data Exchange (ETDEWEB)

    Perez Galindo, Jose Arturo; Garcia Gutierrez, Alonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1985-12-31

    This work describes the experimental technique for the sublimation of naphthalene in air which measures heat transfer coefficients through the use of the analogy between the transference phenomena of heat and mass. The technique used to substitute the experimental measurements of heat transfer, in which it is difficult to control the border thermal conditions, when they are dimmed by the omnipresent problem of heat conduction through the walls of the transference surfaces. Two examples are included of the application technique and its potential is outlined. [Espanol] En este trabajo se describe la tecnica experimental de la sublimacion de naftalina en aire mediante la que se miden coeficientes de transferencia de masa. Los datos asi obtenidos pueden convertirse en coeficientes de transferencia de calor a traves del uso de la analogia entre los fenomenos de transferencia de calor y masa. La tecnica se utiliza para substituir las mediciones experimentales de transferencia de calor, en las que es dificil controlar las condiciones termicas de frontera, cuando las empana el problema omnipresente de la conduccion de calor a traves de las paredes de las superficies de transferencia. Se incluyen dos ejemplos de la aplicacion de la tecnica y se destaca su potencial.

  9. Comparison of three contrast radiographic techniques in the dog large intestine; Comparacion de tres tecnicas radiograficas de contraste en el intestino grueso del perro

    Energy Technology Data Exchange (ETDEWEB)

    Vargas, L.; Thibaut, J.; Olhaberry, E.; Born, R.; Deppe, R. [Universidad Austral de Chile, Valdivia (Chile)

    1994-07-01

    In order to compare three radiographic techniques -pneumocolon, barium enema and double contrast- in the large intestine of the dog, three radiographic series in ventrodorsal and right lateral projections were taken. Six healthy adult dogs of both sexes with an approximate weight between 5 to 10 kg were used. Three enemas were administered 24, 12 and 2 hrs. before the series of radiographs were taken. Then dogs were anaesthetized with sodium tiopental (20 mg/kg iv) and the contrast media were introduced. Pneumocolon was carried out in the first series introducing air (20 cc/kg) in the large intestine through a Foley rectal catheter. Radiographs were taken in both projections, after 5 and 15min. respectively. Barium enema was performed in the second series introducing barium sulfate (18%) in the large intestine through a Foley rectal catheter (25 cc/kg); 5 and 15 min. later, the radiographs were taken. In the third series -double contrast- the barium sulfate, which was obtained from each dog using a catheter, was substituted by a volume of air equal to that obtained from the contrast medium. Later the radiographs were taken in both projections. The radiographic plates of each series were analized comparing the characteristics of: radiographic density, outline and volume. With the pneumocolon barium enema and double contrast, the radiographic density was, in most cases, low, high and inter-mediate respectively. The radiographic outline was, in most cases, regular for the three techniques. Thee radiographic volume was similar in all of the series. From the results obtained, it is concluded that double contrast best outlines the intestinal mucosa and more information can be obtained from it [Spanish] Con la finalidad de comparar tres tecnicas radiograficas del intestino grueso del perro -neumocolon, enema baritado y doble contraste-, se tomaron tres series radiograficas en proyeccion ventrodorsal y lateral derecha en 6 perros adultos, de 5 a 10 kg de peso, que

  10. Clinical Photoscintillography: Technique and Applications; Photoscintigraphie Clinique: Methode et Applications; Klinicheskaya fotostsintillografiya: metodika i primenenie; Fotocentelleografia Clinica: Tecnicas y Aplicaciones

    Energy Technology Data Exchange (ETDEWEB)

    Ephraim, K. H. [Rotterdamsch Radio-Therapeutisch Instituut, Rotterdam (Netherlands)

    1964-10-15

    ' de exploracion. La intensidad luminosa y la frecuencia de los destellos de esta ultima varian con el indice de recuento, obteniendose asi una respuesta no lineal sin introducir la inercia de un circuito integrador. Los destellos 'secundarios' se registran sobre pelicula. Para impedir la perdida de datos debido a su registro en la region de saturacion de la curva de sensibilidad de la pe licu la, se utiliza una amplificacion de contraste moderada y la pelicula se examina en un circuito de television industrial. El autor subraya la necesidad de adaptar las condiciones de colimacion al problema clinico que haya de resolverse. En la memoria se examinan las aplicaciones clinicas de esta tecnica al estudio de enfermedades tiroideas, renales, hepaticas y oseas. (author) [Russian] Pri primenenii fotoscintillografii v klinike ogromnoe znachenie imejut kollimacija, u si l e nie kontrastnosti i nakoplenie dannyh. Dlja obnaruzhenija ogranichennyh uchastkov porazhenija v takih plotnyh organah, kak pechen' i mozg , byl razrabotan special'nyj 36-kanal'nyj mnogofokusnyj kollimator. Demonstrirujutsja izochuvstvitel'nye linii jet o go kollimator a . E go chuv stvitel'nost' malo m en ja et sja ot poverhnosti do glubiny, ravnoj naibol'shej tolshhine pecheni. Byl postr oen special'nyj usilitel' kontrastnosti: nebol'shaja ''pervichnaja'' lampa nakalivanija, soedinennaja cherez impul'snyj usilitel' na vyhode odnokanal'nogo an a l i za t or a upravlja etsja s pomoshh'ju za vi sim o go ot svetareostata (ZSR). Soprotovlenie 3 SR izmenja etsja v zavisimosti ot sk or o sti . Posledovatel'no po otnosheniju k ZSR s o edinena skennirujushhaja ''vtorichnaja'' lampa nakalivanija. Jarkost', a takzhe chastota vspyshek poslednej zavisit ot skorosti scheta i tem samym nelinejnaja chuvstviteltnost' dostigaetsja b e z vvedenija inercionnogo k on tura. ''Vtorichnye'' vspyshki re gi str i rujut sja na p lenk e. S cel'ju predotvrashhenija poteri informacii pri registracii v oblasti nasyshhenija krivoj chuv

  11. Voltage stability evaluation facing small disturbances by means of the modal analysis technique; Evaluacion de la estabilidad de voltaje ante disturbios pequenos mediante la tecnica de analisis modal

    Energy Technology Data Exchange (ETDEWEB)

    Leon Rodriguez, Daniel

    2000-12-15

    . Estos aspectos han provocado que dichos sistemas operen con margenes de seguridad mas limitados y que su estabilidad tenga que ser analizada de una manera confiable y precisa. Tomando en cuenta los aspectos arriba mencionados, a medida que los sistemas electricos han tenido que operar en condiciones mas forzadas para satisfacer la demanda de la carga, los problemas de estabilidad de voltaje se han presentado con mayor frecuencia provocando serios disturbios y en algunos casos, hasta apagones totales. Ante la ocurrencia de estos problemas, el analisis de establidad de voltaje ha cobrado cada vez mayor importancia en los estudios de las companias suministradoras de energia electrica provocando con esto que se destinen mayores recursos para la investigacion de este fenomeno con el proposito de comprenderlo y desarrollar tecnicas y herramientas que permitan estudiarlo de una manera mas completa. El analisis modal es una de las mas recientes tecnicas en estado estable la cual, desde su aparicion ha tenido un gran auge debido a la valios y rapida informacion que proporciona, ademas de su facilidad de implementacion y el poco esfuerzo computacional que requiere. En este trabajo se realiza la evaluacion de la estabilidad de voltaje d eun sistema electrico real aplicando de manera conjunta la tecnica de analisis modal con otras tecnicas convencionales como las curvas P-V y V-Q. Se ilustra tambien la manera en que la distinta informacion obtenida de estas tecnicas se complementa para lograr un estudio de estabilidad de voltaje mas completo y representativo. Ademas de analizar la estabilidad de voltaje para las condiciones normales de operacion (caso base), se evaluan tambien tres distintas alternativas de compensacion reactiva capacitiva con objeto de mejorar el margen o distancia a la inestabilidad de voltaje del sistema. Los resultado obtenidos con cada una de las opciones de compensacion son analizados y comparados entre si para finalmente proponer la alternativa que presente

  12. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N. [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1995-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  13. Utilization of the computational technic for the promotion and diffusion of the energy conservation practice; Utilizacion de tecnicas computacionales para promocionar y difundir el ahorro de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, N [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria, UNAM, Mexico D. F. (Mexico)

    1996-12-31

    In this paper are presented the developments obtained through the application of the new computational technologies in the diffusion and promotion tasks of energy efficient use and conservation. The most relevant aspects are described of three multimedia courses that were designed in order to increase the possibilities of offering personal training in efficient energy technic, as well as to have on hand totally open consulting and interactive tools. The courses that are described are: ``Design of Energy Conservation Programs for the Industry``, ``Energy Conservation in Combustion Equipment`` and ``Energy Cogeneration Technologies.`` On another subject, an analysis is also made of the possibilities for the development and application of expert systems that advise and give support to the work of technicians and engineers dedicated to energy conservation. The main characteristics of an expert system to give support to the energy analysis of lighting industrial systems, malls, buildings and hotels are also described. [Espanol] En este trabajo se presentan los desarrollos obtenidos por la aplicacion de las tareas de difusion y promocion del uso eficiente y ahorro de energia. Se describen los aspectos mas relevantes de tres cursos multimedia que fueron disenados con el objeto de incrementar las posibilidades de brindar capacitacion individualizada en tecnicas energeticas eficientes, asi como de contar con herramientas de consulta totalmente abiertas e interactivas. Los cursos que se describen son: ``Diseno de Programas de Ahorro de Energia en la Industria,`` ``Ahorro de Energia en Equipos de Combustion`` y ``Tecnologias de Cogeneracion de Energia.`` Por otro lado, tambien se hace un analisis de las posibilidades para el desarrollo y aplicacion de sistemas expertos que asesoren y apoyen el trabajo de tecnicos e ingenieros dedicados al ahorro de energia. Se describen las caracteristicas principales de un sistema experto disenado para brindar apoyo en analisis energeticos

  14. The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

    1998-12-31

    This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

  15. The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

    1999-12-31

    This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

  16. La estadistica en el planeamiento educativo (Statistics in Educational Planning).

    Science.gov (United States)

    Leon Pacheco, Tomas

    1971-01-01

    This document is an English-language abstract (approximately 1500 words) summarizing the author's definitions of the principal physical and human characteristics of elementary and secondary education as presently constituted in Mexico so that school personnel may comply with Mexican regulations that force them to supply educational statistics. For…

  17. ACTITUDES DE LOS ESTUDIANTES UNIVERSITARIOS HACIA LA ESTADISTICA

    Directory of Open Access Journals (Sweden)

    NÉLIDA RODRÍGUEZ FEIJÓO

    2011-01-01

    Full Text Available Los propósitos de la investigación que se informa fueron: (a describir las opiniones y actitudes hacia la Estadística de estudiantes de carreras universitarias no humanísticas, tales como Ingeniería, Física, etc. y humanísticas, tales co - mo Psicología, Ciencias de la Educación, etc. y (b analizar la influencia sobre las opiniones y actitudes hacia la Estadística de ciertas variables, tales como condiciones didácticas de los profesores de Matemática y/o Estadística, promedio de calificaciones obtenidas durante el secundario, opinión sobre la utilidad de la Estadística para su profesión, etc. Con tal fin se administraron un cuestionario de datos personales y dos escalas de actitudes hacia la Estadística construidas de acuerdo a dos métodos diferentes (Diferencial Semántico de Osgood e Intervalos Aparentemente Iguales de Thurstone. La muestra era de tipo incidental no probabilística e integrada por 229 estudiantes universitarios (64% mujeres y 36 % varones, el 68% era de carreras no matemáticas y el 32% de carreras matemáticas. Para comparar los dos grupos de estudiantes se aplicaron pruebas de diferencias de medias de muestras no correlacionadas. Los resultados obtenidos indican que los estudiantes de carreras humanísticas poseen actitudes más desfavorables hacia la Estadística que los estudiantes de carreras no humanísticas. Las condiciones didácticas de los profesores de Matemática y Estadística, el promedio de calificaciones obtenidas en Matemática durante el secundario y la opinión sobre la utilidad de la Estadística para el ejercicio de la profesión influyen en forma estadísticamente significativa sobre la formación de las actitudes hacia la Estadística.

  18. Alfabetizacion Estadistica en Profesores de Distintos Niveles Formativos

    Directory of Open Access Journals (Sweden)

    Francisco Enrique Rodriguez-Alveal

    2017-12-01

    Full Text Available El presente artículo tiene por objetivo evaluar los niveles de alfabetización estadística y la percepción que tienen estudiantes en Formación Inicial Docente y profesores en ejercicio del sistema escolar. Para tal efecto, se aplicaron dos instrumentos: el primero, de alfabetización estadística y el segundo de percepción, validados estadística. Los resultados evidencian que, en general, los estudiantes en Formación Inicial Docente y profesores en ejercicio presentan porcentajes de logro descendidos en la descodificación de situaciones problemáticas de tipo textual, entregando además argumentaciones poco plausibles con los saberes estadísticos donde intervienen conceptos básicos de estadística.

  19. Papel de la estadistica en la investigacion cientifica

    Directory of Open Access Journals (Sweden)

    Badii, M.H.

    2007-01-01

    Full Text Available Se desciben las bases fundamentales de la estadítca y su aplicación a la investigación científica. Se discuten los conceptos relevantes en la ciencia estadítica. Se manejan los tipos de datos estadíticos a colectar. Se presentan de manera somera, algunos disños estadísticos de uso común en la literatura cietífica actual. Se considerán las pistas esenciales para realizar investigación científica. Finalmente, se notan la manera (modelo de ECOEE de contrastar científicamente los trabajos distintos de investigación con base estadística, evitando ignorar los elementos esenciales que proveen sustento científico a la discusión y las comparaciones correctas de los hallazgos.

  20. INTRODUCCION A LA ESTADISTICA PARA ECONOMISTAS AGRICOLAS USANDO EL SPSS

    OpenAIRE

    Swinton, Scott M.; Labarta, Ricardo A.

    2003-01-01

    Este documento es un manual de estadística para economistas aplicados que usan el programa estadístico SPSS. Está diseñado para ser usado dentro de un taller de capacitación de una semana, y tiene como propósito familiarizar a profesionales de la investigación con procedimientos estadísticos básicos, necesarios para realizar análisis socioeconómicos a datos que provienen de encuestas. Este documento es una introducción para los usuarios en la creación y manipulación de las bases de datos, en ...

  1. Exploitation of biogas in municipal in slaughterhouses: Technical-economical evaluation; Aprovechamiento de biogas en rastros y mataderos municipales: Evaluacion tecnica-economica

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Hernandez, Donaji A; Castaneda Sanchez, Arlem M; Garcia Galeana, Erika [Universidad Nacional Autonoma de Mexico (UNAM), Facultad de Ingenieria (Mexico)

    2009-07-01

    Nowadays the treatment of the solid and liquid remainders in the municipal slaughter houses is small because of the idea that the treatment is expensive; nevertheless, it is important to take advantage of them, since this can reduce to the environmental impacts they cause, as well as the discharge of greenhouse effect gas. The use of bio digesters for the treatment of these remainders has become an efficient process to avoid the exit of methane gas to the atmosphere, taking advantage of the biogas and other residues to produce electricity. The elaboration of a technical-economical evaluation of a pilot plant shows the costs of investment, maintenance, as well as the income that can be obtained by the total usage of these residues and the savings in the electrical power consumption. The analysis of this study demonstrates that the use of biogas through bio-digesters for the generation of electrical energy is a profitable option for the treatment of the residues, because the income by the sale of compost, blood flour, as well as the diminution of the electrical tariff, justifies the initial investment. These projects will be more attractive, if they use financing and are registered as MDL projects. [Spanish] Actualmente el tratamiento de los desechos solidos y liquidos en los rastros y mataderos municipales es poco pues se tiene la idea de que el tratamiento es costoso; sin embargo, es importante que se aprovechen ya que esto puede reducir los impactos ambientales que provocan, asi como la emision de gases de efecto invernadero. El uso de biodigestores para el tratamiento de estos desechos, se ha convertido en un proceso eficiente para evitar la salida de gas metano a la atmosfera, aprovechando el biogas y otros residuos para producir electricidad. La elaboracion de una evaluacion tecnica-economica de una planta piloto, muestra los costos de inversion, mantenimiento, asi como los ingresos que se pueden obtener por el aprovechamiento total de estos residuos y el

  2. Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

    Energy Technology Data Exchange (ETDEWEB)

    Rincon Nader, Jorge A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1993-12-31

    The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

  3. Study of the flooding and dehydration processes of a PEM fuel cell using the EIS technique; Estudio de los procesos de inundacion y deshidratacion en una celda de combustible tipo PEM mediante la tecnica EIS

    Energy Technology Data Exchange (ETDEWEB)

    Loyola-Morales, F.; Cano-Castillo, U. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: feloyola@yahoo.com.mx

    2009-09-15

    In this work, a study was conducted of the flooding and dehydration processes of a PEM fuel cell using the EIS technique. The experiments were conducted in a 50 cm{sup 2} cell. The gradual flooding of the system was induced by operating the cell at a potential of 0.3 V and maintaining the gas outlet closed (that is, stoichiometry of 1 for the anode (H{sub 2}) and the cathode (O{sub 2})) to enable the water produced by the reaction to accumulate inside. The gradual dehydration was induced by operating the cell at a potential of 0.3V and establishing a oxidized gas flow at a stoichiometry of 4. EIS tests were applied throughout both processes. The results showed that the EIS technique is highly sensitive for the analysis of the different degrees of the flooding processes by monitoring variations in the imaginary components of total impedance (Z{sup )} or the phase angle ({theta}). For low degrees of flooding, the technique had good sensitivity, between 1 and 6 Hz, while at high degrees of flooding the technique's greatest sensitivity was limited to a range between 1 and 2 Hz. In the case of the dehydration process of the system, the results showed that this type of process can be analyzed for variations in the value of the real component (Z{sup '}) as well as for the imaginary component of total impedance and variations in the phase angle. The analysis of dehydration with Z{sup '} was possible at a rather wide range, from 100 to 1000 Hz; with Z{sup }or {theta} it was only possible at a range of 20 to 200 Hz. [Spanish] En el presente trabajo, se llevo a cabo el estudio de los procesos de inundacion y deshidratacion de una celda de combustible tipo PEM mediante la tecnica EIS. Los experimentos fueron realizados en una celda de 50 cm{sup 2}. La inundacion gradual del sistema se indujo operando la celda a un potencial de 0.3 V de celda y manteniendo la salida de gases cerrada (i. e. estequiometria de 1 tanto en anodo (H{sub 2}) como en catodo (O{sub 2

  4. Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

    Energy Technology Data Exchange (ETDEWEB)

    Rincon Nader, Jorge A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1992-12-31

    The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

  5. Control of a deareador level of a thermoelectric power station using modern control techniques; Control de nivel de un deareador de una central termoelectrica utilizando tecnicas de control moderno

    Energy Technology Data Exchange (ETDEWEB)

    Chavez Estrada, Jose Israel

    1997-01-01

    The present work shows the implementation of the scheme of predictive control IMC (Internal Model Control) in order to control the level of the deareador of a combined cycle thermoelectric power station of (C.C.T.S.). The implementation has the purpose of looking for alternative strategies of control to the classic ones (PID`s) that more efficiently control the variables of interest, in addition to getting into the new control techniques of control. Following the philosophy of predictive control IMC the form to applying this technique is shown, as well as the implementation of this type of controllers. A comparison of predictive control IMC is made with the scheme of conventional control (three control elements PID`s ) used at present to control the level of the deareador in the Combined Cycle Thermoelectric Power stations of Dos Bocas, Veracruz, Mexico and of Gomez Palacio, Durango, Mexico. [Espanol] El presente trabajo muestra la implementacion del esquema de control predictivo IMC (Control con Modelo Interno) con el objeto de controlar el nivel del deareador de una Central Termoelectrica de Ciclo Combinado (C.T.C.C.). La implementacion tiene la finalidad de buscar estrategias de control alternas a las clasicas (PID`s) que controlen mas eficientemente la variable de interes, ademas de incursionar en las nuevas tecnicas de control. Siguiendo la filosofia del control predictivo IMC se muestra la forma de aplicar esta tecnica, asi como la implementacion de este tipo de controladores. Se hace una comparacion del control predictivo IMC con el esquema de control convencional (control de tres elementos PID`s) utilizando actualmente para controlar el nivel del deareador en las centrales termoelectricas de ciclo combinado de Dos Bocas, Veracruz y de Gomez Palacio, Durango en Mexico.

  6. Phytoremediation techniques; Tecnicas de fitorremediacion

    Energy Technology Data Exchange (ETDEWEB)

    Bonilla, A.; Urzelai, A.; Bartolome, I.; Cagigal, E. [Unidad de Medio Ambiente. Bilbao (Spain)

    2000-07-01

    The ground pollution by heavy metals is a problem is a problem widely spreaded in the majority of the industrialised countries. Therefore, areas with high concentration of heavy metals in their ground are often associated with the areas in which mining activities have been developed and areas highly industrialised. This situation implies a deficient ecosystem behaviour. (Author)

  7. Seminar on utilization of nuclear techniques in the agricultural research carried out in FONAIAP. Abstracts and lectures; Seminario sobre utilizacion de tecnicas nucleares en la investigacion agropecuaria realizada en el FONAIAP. Resumenes y ponencias

    Energy Technology Data Exchange (ETDEWEB)

    Romero S, Alfredo [ed.; Bracamonte, Magaly [Fondo Nacional de Investigaciones Agropecuarias (FONAIAP), Centro Nacional de Investigaciones Agropecuarias (CENIAP), Maracay (Venezuela)

    1997-07-01

    tropicales y su transferencia a Brachiaria humidicola en asociacion; unidad de analisis isotopicos estables N{sup 1}5; efecto de diferentes formas de colocacion del fertilizante en el suelo en la eficiencia de uso del N evaluada mediante la tecnica isotopica y el N absorbido por el cultivo; aplicacion de progesterona y testosterona en el diagnostico y control de la reproduccion en ganaderias mestizas; avances en el seguimiento de sistemas de produccion en ganaderia de doble proposito en el area de Guayabal, estado Guarico; investigaciones acuicolas con tecnicas de energia nuclear; desarrollo de la base de datos bibliografia edafologica venezolana.

  8. 19. National seminar on the rational use of energy and exposition of equipment and services. Transactions. [Selected Papers]; 19. Seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This document contains the technical proceedings of the 19 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Pofesionistas en Aplicacion Energetica (ATPAE) (Association of Technicians and Professionals on Energy Application) conducted in Mexico City on September 21-25, 1998. This seminar encompassed subjects such as: energy saving in the energy sector, energy efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in buildings, transportation, non-renewable energy utilization and environmental impact and eco-energies. [Espanol] Este documento contiene la memoria tecnica del 19 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F, los dias 21-25 de septiembre de 1998. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables, e impacto ambiental y eco-energias.

  9. Proceedings of the 20 National seminar on the rational use of energy and exposition of equipment and services. [Selected Papers]; 20. Seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This document contains the proceedings of the 20 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociaciacion de Tenicos y Profesionistas en Aplicacion Energetica (ATPAE), in Mexico, D.F, from the 15 to the 19 of November of 1999. This Seminar covered subjects such as: Energy saving in the power sector, power efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in constructions, transport, utilization of renewable energies, and energy and the environment. [Spanish] Este documento contiene la memoria tecnica del 20 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F., del 15 al 19 de noviembre de 1999. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables, y energia y ambiente.

  10. Proceedings of the 21 National seminar on the rational use of energy and exposition of equipment and services. [Selected Papers]; 21 Seminario nacional sobre el uso racional del a energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This document contains the proceedings of the 21 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), in Mexico, D.F., from the 14 to the 16 of March of 2001. This Seminar covered subjects such as: Energy saving in the power sector, power efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in constructions, transport, utilization of renewable energies and the environment. [Spanish] Este documento contiene la memoria tecnica del 21 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F., del 14 al 16 de marzo de 2001. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables y ambiente.

  11. 19. National seminar on the rational use of energy and exposition of equipment and services. Transactions. [Selected Papers]; 19. Seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-31

    This document contains the technical proceedings of the 19 national seminar on the rational use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Pofesionistas en Aplicacion Energetica (ATPAE) (Association of Technicians and Professionals on Energy Application) conducted in Mexico City on September 21-25, 1998. This seminar encompassed subjects such as: energy saving in the energy sector, energy efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in buildings, transportation, non-renewable energy utilization and environmental impact and eco-energies. [Espanol] Este documento contiene la memoria tecnica del 19 seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F, los dias 21-25 de septiembre de 1998. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables, e impacto ambiental y eco-energias.

  12. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Spanish Edition); Texto Revisado de Los Principios Rectores n Normas Generales de Ejecucion Para la Prestacion de Asistencia Tecnica por el Organismo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1979-03-15

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules. [Spanish] El 21 de febrero de 1979 la Junta de Gobernadores aprobo el texto revisado de los Principios rectores y normas generales de ejecucion para la prestacion de asistencia tecnica por el Organismo. Para informacion de todos los Estados Miembros, en el presente documento se transcribe dicho texto. En el Anexo del texto revisado de los Principios rectores y normas generales de ejecucion se transcriben tambien las disposiciones prescritas por la Junta de Gobernadores el 24 de septiembre de 1977 acerca de la aplicacion de salvaguardias en relacion con la asistencia tecnica.

  13. Application of monitoring techniques of operational parameters for the implementation of preventive and predictive maintenance programs to gas turbines; Aplicacion de tecnicas de monitoreo de parametros operacionales para la implantacion de programas de mantenimiento predictivo y preventivo en turbinas de gas

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Villareal, Julio Cesar

    1998-12-31

    components. These techniques are: hardness testing, liquid penetrant inspection, magnetic particle inspections and metallographic examination. Chapter five describes the boroscopy inspection and its applications for a rotor analysis and gas turbine blades. Chapter six shows the results obtained and give recommendations for the vibration analysis that were carried out at a gas turbine facility. [Espanol] Esta tesis se realiza con la finalidad de implantar un programa de mantenimiento preventivo y predictivo, mediante tecnicas de monitoreo de parametros que permita sistematizar, documentar y administrar las actividades del mantenimiento. La metodologia de mantenimiento aqui descrita, se aplica a las turbinas de gas de la Terminal Maritima Dos Bocas Tabasco, Mexico. El mantenimiento preventivo se basa en la revision periodica de los equipos, mediante listas de inspeccion, donde la idea es detectar problemas que provoquen posibles fallas y realizar la reparacion o ajusted necesarios para evitarlo. Sin embargo enfrenta a la posibilidad de que el equipo este en perfecto estado y al estar en revision, tenga retrasos y problemas de arranque posteriores. El mantenimiento predictivo se basa en tecnicas que permiten la deteccion e identificacion de fallas incipientes en los equipos. Las tecnicas recomendadas en esta tesis son: Analisis de vibraciones; Evaluacion no destructivas e Inspeccion boroscopica. La estructura de la tesis consta de los capitulos siguientes: El capitulo uno describe la importancia de los programas y estrategias del mantenimiento, sus ventajas y desventajas al aplicarlas en las plantas de proceso continuo. Se plantean los procedimientos para el diseno de un programa de mantenimiento. El capitulo dos presenta la manera de planear los recursos y materiales de mantenimiento, las tecnicas de inspecciones aplicados a la turbina de gas, y finalmente se disenan listas de verificacion de inspecciones como herramienta del mantenimiento preventivo. Los capitulos siguientes

  14. On-line diagnosis of high power motors based on ultra wide band partial discharge detection; Diagnostico en linea de motores de gran capacidad mediante la deteccion de descargas parciales utilizando tecnicas de banda ultra ancha

    Energy Technology Data Exchange (ETDEWEB)

    Carvajal M, F. Antonio; Garcia Colon H, Vicente R. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Asiain, Tomas [Instituto Politecnico Nacional, Escuela Superior de Ingenieria Mecanica y Electrica (Mexico)

    2009-07-01

    In this work a non-standardized method for on-line diagnostic of high capacity motors based on Ultra Wide Band (UWB) Partial Discharge (PD) measuring techniques is theoretically supported, implemented and applied. The method developed is non invasive and consist in the measurement of PD in the main motor power supply cables and its ground shields connection using a near field sensor (Rogowski coil, clamp-on type) with a bandwidth of 2 to 40 MHz. The measured signals by the sensor, are stretched electronically, digitized and fed to a conventional Partial Discharge digital detector. The UWB PD detection system used displays the output in a Pulse repetition frequency-Charge-Phase angle (N-Q-?) PD pattern. The results obtained in thirteen 2500 H.P., 13.8 kV motors performed during operating in an Oil Pumping facility are presented, including its analysis and comparison with values and PD patterns reported in literature. [Spanish] En este trabajo se presentan los fundamentos teoricos, la implementacion y aplicacion de un metodo no normalizado, para el diagnostico en linea de motores de gran capacidad, basado en la deteccion de Descargas Parciales (DP) utilizando tecnicas de medicion de Banda Ultra Ancha. El metodo desarrollado es no invasivo y consiste en la medicion de las DP en los conductores y conexiones a tierra de la pantalla de los cables principales de suministro de energia al motor, utilizando un sensor de campo cercano (bobina Rogowski, tipo gancho) cuyo ancho de banda de medicion es de 2 a 40 MHz. Las senales medidas por el sensor son electronicamente procesadas para ampliar su duracion, digitalizadas y enviadas a un detector digital de Descargas Parciales convencional. El sistema de deteccion de DP en Banda Ultra Ancha despliega la medicion en un patron de DP tipo frecuencia de repeticion de Pulso-Carga-Angulo de fase (N-Q-?). Se presentan los resultados obtenidos de la evaluacion en linea de trece motores de 2500 C.P. a 13.8 kV, instalados y operando en una

  15. Technical feasibility of using silver and copper ions electro generated in the microbiological control of cooling systems; Factibilidad tecnica para emplear iones plata y cobre electrogenerados en el control microbiologico de los sistemas de enfriamiento

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Susana M; Martinez Meza, Esteban; Alvarez Gallegos, Alberto [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2001-07-01

    bacterial populations promoters of the microbiological influenced corrosion and the biological fouling at levels of 1000 c/ml and less, competing with the conventional cooling water treatment processes. Also, the adherence capacity of the biofilm on the surfaces of the cooling system would be seriously affected because the silver is adsorbed to the surface that contains it and still continues its bactericidal effect. Additionally, the coliform bacteria are reduced below the levels accepted by the Mexican Official Standard. A table of the silver required for disinfection of different water qualities is shown and another one on the evaluation of the process and finally one on the effectiveness of the process using the silver/copper system in residual water. [Spanish] El objetivo de este trabajo es determinar la factibilidad tecnica de sustituir el uso de cloro por otro biocida (ionizacion de plata o cobre) no peligroso en aguas de enfriamiento. Esta tecnica de ionizacion podria ser empleada para tratar el agua de procesos industriales en general. El agua empleada provino del agua de repuesto del sistema de enfriamiento de la Central Termoelectrica de Valle de Mexico (CTEVM) y agua residual de las plantas de tratamiento del Instituto Mexicano de Tecnologia del Agua (IMTA) y el Instituto de Investigaciones Electricas (IIE). Los tres tipos de agua empleados tienen caracteristicas fisicas, quimicas y biologicas similares. La metodologia usada fue la prueba de jarras y por sistema continuo. Se indica el analisis bacteriologico llegando a la conclusion. Los sistemas metalicos estudiados en el establecimiento del control microbiologico en el agua residual y agua de repuesto son plata, plata/cobre y cobre en los intervalos de concentracion de 200 mg/L a 3000 mg/L de plata y de 200 mg/L a 1200 mg/L de cobre. Los experimentos realizados en la prueba de jarras (sistema cerrado) se llevaron a cabo a dos temperaturas (25 {+-} 0.5 y 32 {+-} 0.5 ) sin controlar el pH; mientras que en el

  16. Development of an electronic ballast with high power factor, using cd/cd conversion techniques for fluorescent lamps; Desarrollo de un balastro electronico con alto factor de potencia, utilizando tecnicas de conversion cd/cd para lamparas fluorescentes

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Raul Antonio

    1995-02-01

    Continuo (MCC), debido a las prestaciones que este convertidor ofrece [11]. La tecnica de control que se utilizo para este convertidor fue el control Modo Corriente Promedio (MCP). Cabe mencionar que en esta etapa de CFP se llevo a cabo un analisis comparativo en forma practica, en la que tambien se probaron dos topologias mas que fueron el convertidor Sepic y Cuk en modo de control seguidor de tension. Estas dos topologias fueron desarrolladas de manera independiente a este proyecto de tesis y no fueron implementadas al balastro como etapa de correccion activa del FP. En la etapa de manejo a la lampara, se uso un convertidor CD/CA en configuracion Push-Pull, en el que se utilizo la tecnica de control PWM para el manejo de la lampara fluorescente. La utilizacion de balastros electronicos en alta frecuencia dentro del rango de 20 a 50 KHz [6,7], hace que se presenten menores perdidas de potencia y favorece los procesos fisicos de la descarga (seccion 1.2.2.)(abstract truncated)

  17. Technical analysis of volume-rendering algorithms: application in low-contrast structures using liver vascularisation as a model; Analisi tecnica degli algoritmi di volume rendering: applicazione alle strutture a basso contrsto usando come modello la vascolarizzazione epatica

    Energy Technology Data Exchange (ETDEWEB)

    Cademartiri, Filippo [Erasmus Medical Center, Rotterdam (Netherlands); Luccichenti, Giacomo [Fondazione Biomedica Europea ONLUS, Roma (Italy); Runza, Giuseppe; Bartolotta, Tommaso Vincenzo; Midiri, Massimo [Palermo Univ., Palermo (Italy). Sezione di scienze radiologiche; Gualerzi, Massimo; Brambilla, Lorenzo; Coruzzi, Paolo [Parma Univ., Parma (Italy). UO di prevenzione e riabilitazione vascolare, Fondazione Don C. Gnocchi ONLUS; Soliani, Paolo; Sianesi, Mario [Parma Univ., Parma (Italy). Dipartimento di chirurgia

    2005-04-01

    visualizzazione delle strutture vascolari portali (strutture a basso contrasto). Materiale e metodi: Sono stati valutati tramite TC spirale con tecnica bifasica 22 pazienti. I parametri utilizzati per la scansione sono stati: collimazione 3 mm, pitch 2, avanzamento 1 mm. Le scansioni eseguite sono state tre: la prima senza mezzo di contrasto (mdc), le ultime due con iniezioni di mdc (convenzionalmente identificate come 'arteriosa' e 'portale'). Le immagini sono poi state trasferite su una consolle di post-elaborazione dotata di sistema oparativo Windows NT con software per ricostruzioni tridimensionali (3D) in grado di produrre immagini in volume rendering della vascolarizzazione epatica. Sono state valutate: la correlazione tra i valori assoluti dell'aorta, attenuazione del fegato e della vena oprta, i parametri delle CO e la qualit� delle immagini. Risultati: Le immagini 3D ottenute utilizzando le CO preimpostate di ricostruzione possiedono una qualit� molto pi� bassa rispetto a quelle ottenute utilizzando la CO scelta dall'operatore. L'elevato contrasto tra il fegato e la vena porta, per esempio durante la fase portale, utilizza delle finestre pi� larghe, in modo da aumentare la qualit� dell'immagine. Al contrario, nelle scansioni effettuate durante la fase parenchimografica, la CO deve avere un elevato gradiente in modo tale da permettere una migliore distinzione delle strutture vascolari dal parenchima epatico che le circonda. Conclusioni: Le caratteristiche dell'immagine, considerate di interesse per l'operatore, non possono essere semplificate dalla media delle CO preimpostate. Data la loro estrema variabilit� individuale, gli algoritmi 3D automatici non possono essere universalmente applicati: dovrebbero essere adattati sia alle caratteristiche dell'immagine che al paziente.

  18. Performance of spanish wind turbines; Estadisticas de produccion de parques eolicos en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Lago, C

    1995-07-01

    In this document we can find a statistical evaluation for the wind energy generation from each spanish wind farm referred to 1994, going on with the work that has been carried out since 1992, by initiative of the Wind Energy Division from Renewable Energy Institute. The purpose of this work is to contribute with interesting information for the wind environment and offer a global view from monthly performances of different wind farms. (Author)

  19. Non extensive Statistical Mechanics. Asymptotic Functions; Mecanica Estadistica no-Extensiva. Funciones Asintoticas

    Energy Technology Data Exchange (ETDEWEB)

    Grau Carles, A.; Grau Malonda, A.

    2007-07-20

    We introduce the 2 function with n degrees of freedom as a Tsallis distribution. We take the probability function for two 2 independent variables X and Y of degree n and m , respectively, and we obtain the explicit expressions for the limits n and m . Integrating these expressions as weight functions and the usual Boltzmann-Gibbs factor over the inverse temperature we obtain the canonical distribution for a system with Hamiltonian H. Finally, we deduce the probability distributions for the generalized velocity when H = u2/2 . (Author) 40 refs.

  20. Statistics of multi-tube detecting systems; Estadistica de sistemas de deteccion multitubo

    Energy Technology Data Exchange (ETDEWEB)

    Grau Carles, P.; Grau Malonda, A.

    1994-07-01

    In this paper three new statistical theorems are demonstrated and applied. These theorems simplify very much the obtention of the formulae to compute the counting efficiency when the detection system is formed by several photomultipliers associated in coincidence and sum. These theorems are applied to several photomultiplier arrangements in order to show their potential and the application way. (Author) 6 refs.

  1. APROXIMACIONES MECANICO-ESTADISTICAS A LOS PATRONES DE ABUNDANCIA EN POBLACIONES GEOGRAFICAS.

    OpenAIRE

    ABADES TORRES, SEBASTIAN RUY; ABADES TORRES, SEBASTIAN RUY

    2006-01-01

    El entendimiento de los patrones de distribución de individuos en el espacio es un tópico central en ecología, pues permite aventurar explicaciones sobre los procesos y mecanismos subyacentes a la organización comunitaria, y comprender los fenómenos de rareza, extinción e invasión de especies. Al respecto, muchos modelos de distribución de abundancias han sido propuestos, con un énfasis marcado en las descripciones inter-específicas y de escala local. El éxito y aceptación de e...

  2. Technical memory 1999; Memoria tecnica 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The technical memory 1999 of the Nuclear Regulatory Authority (NRA) of the Argentine Republic, compile the papers published in the subject on radiation protection and nuclear safety, safeguards and physical protection, and presented in congress or meetings of these specialities by personnel of the mentioned institution during 1999.

  3. Technical Report 2000; Memoria Tecnica 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The technical memory 2000 of the Nuclear Regulatory Authority (NRA) of the Argentine Republic, compile the papers published in the subject on radiation protection and nuclear safety, safeguards and physical protection, and presented in congress or meetings of these specialities by personnel of the mentioned institution during 2000. In this edition the documents are presented on: Nuclear safety; Radiobiology; Occupational doses; Radiochemical; Environmental studies; Emergency plans; Radiation accidents; and International safeguards. Some of them are realized by agreements between the Nuclear Regulatory Authority of Argentina, universities and other national and international organizations.

  4. Scanning Techniques for Brain-Tumour, Localization; Techniques Scintigraphies pour la Iocalisation des Tumeurs Cerebrales; Tekhnika skennirovaniya pri opredelenii lokalizatsii opukholej mozga; Tecnicas Centelleograficas para la Localizacion de Tumores Cerebrales

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, M. H.; Brice, J.; Jones, E.; Mallard, J. R.; Myers, M. L. [Department Of Medical Physics, Postgraduate Medical School, Hammersmith Hospital, London (United Kingdom)

    1964-10-15

    tentativa para efectuar exploraciones con esa sustancia por deteccion gamma con ayuda de un colimador enfocado. En la memoria se presentan los primeros resultados de ese estudio. Los colimadores enfocados que se emplean para los emisores gamma tienen un foco geometrico profundo y con ellos se obtienen lineas de isorrespuesta a fuentes puntiformes que son casi independientes de la profundidad en una extension de 20 cm. Los resultados experimentales han permitido obtener datos para construir colimadores que reunen ciertas caracteristicas especificas. Algunos casos de tumor cerebral han sido explorados con un detector estacionario de camara de rayos gamma y presentados en un osciloscopio con memoria. Las ventajas de estos instrumentos estriban en su mayor sensibilidad y en la rapidez con que permiten visualizar el esquema de distribucion de la radiactividad, lo cual permite a su vez efectuar estudios dinamicos. Los inconvenientes que entrana el empleo de esos dispositivos son, entre otros, la dificultad de marcar caracteristicas anatomicas y las deformaciones geometricas a que dan lugar. En la memoria se comparan estas ultimas al utilizar camaras estenoscopicas y camaras de matriz. Se discuten las mejoras obtenidas modificando los circuitos para lograr que el tamano de la imagen sea independiente de la energia de los rayos gamma. El analisis de los centelleogramas del cerebro presenta dificultades cuando la region sospechosa acusa un indice de recuento solo ligeramente superior al de las zonas que la rodean. Se ha determinado un esquema 'normal' de fndice de recuento para una cabeza, dividiendo los centelleogramas en regiones que desde el punto de vista anatomico son casi equivalentes de un paciente a otro, y contando los datos centelleograficos en cada region. Todo centelleograma anormal se puede comparar con este esquema. Estos tipos de analisis pueden efectuarse con provecho mediante calculadoras. Tambien puede ser util emplear tecnicas de promediacion continua para

  5. Proceedings of the 24. National seminar on the rational use of energy and exposition of equipment and services and 7. Binational seminar on energy saving [Selected Papers]; 24. Seminario nacional sobre el uso racional de energia y exposicion de equipos y servicios y 7. Seminario binacional de ahorro de energia. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document contains the technical briefings of the 24. National Seminar on the rational use of energy, and exhibition of the equipment and services and the 7. Binational seminar on energy saving, organized by the Asociacion de Profesionistas y Tecnicos en Aplicacion Energetica (ATPAE), in Ciudad Juarez, Chihuahua, Mexico, from November 9 to 11, 2005. This seminar dealt with subjects such as: electrical energy saving, energy distribution, solar energy, energy saving in compressed air, biomass, administration and control of the demand of the electrical energy, bioclimatic architecture, use of the compressed natural gas, renewable energy, co-generation, qualification and consultancy for the intelligent use of the energy in PyMES. [Spanish] Este documento contiene la memoria tecnica del 24 Seminario Nacional sobre el uso racional de energia, y exposicion de los equipos y servicios y el 7 Seminario binacional de ahorro de energia, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Ciudad Juarez, Chihuahua, Mexico, del 9 al 11 de noviembre del 2005. Este seminario trato temas tales como: ahorro de energia electrica, distribucion de la energia, energia solar, ahorro de energia en aire comprimido, biomasa, administracion y control de la demanda de la energia electrica, arquitectura bioclimatica, uso del gas natural comprimido, energia renovable, cogeneracion, capacitacion y consultoria para el uso inteligente de la energia en las Pymes.

  6. Proceedings of the 22 National seminar on the rational an efficient use of energy and exposition of equipment and services. [Selected Papers]; 22. Seminario nacional sobre el uso racional y eficiente de la energia y exposicion de equipos y servicios. Memoria Tecnica. [Ponencias seleccionadas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This document contains the proceedings of the 22 national seminar on the rational and efficient use of energy and exposition of equipment and services, organized by the Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), in Mexico, D.F., from the 25 to the 29 of August of 2003. This Seminar covered subjects such as: Energy saving in the power sector, power efficiency in industrial processes and practical developments, practical cases of energy saving in industry, energy saving in constructions, transport, utilization of renewable energies and the environment. [Spanish] Este documento contiene la memoria tecnica del 22 seminario nacional sobre el uso racional y eficiente de la energia y exposicion de equipos y servicios, organizado por la Asociacion de Tecnicos y Profesionistas en Aplicacion Energetica (ATPAE), en Mexico, D.F., del 25 al 29 de agosto de 2003. Este seminario trato de temas tales como: Ahorro de energia en el sector energetico, eficiencia energetica en procesos industriales y desarrollos practicos, casos practicos de ahorro de energia en la industria, ahorro de energia en edificaciones, transporte, aprovechamiento de energias renovables y ambiente.

  7. The Technical Training Programme for Nuclear Power Station Personnel; Programme de formation technique du personnel des centrales nucleaires; Programma tekhnicheskoj podgotovki personala yadernoj ehlektrostantsii; El programa de formacion tecnica del personal de una central nucleoelectrica

    Energy Technology Data Exchange (ETDEWEB)

    Howey, G. R. [Hydro-Electric Power Commission of Ontario, Toronto, Ontario (Canada)

    1963-10-15

    de ingenieros con considerable experiencia en trabajos nucleares, centrales termicas y produccion de electricidad; b) Se selecciono entre especialistas altamente calificados otro grupo de operadores y de personal encargado del mantenimiento del equipo; c) Los componentes de ambos grupos siguieron un curso especial sobre centrales nucleoelectricas y termicas, con clases teoricas y practicas a cargo de ingenieros de la central NPD; d) Se creo un centro de formacion en tecnicas nucleares con objeto de seleccionar y capacitar mas personal y de someterle a los examenes pertinentes. El personal fue sometido ademas a un examen por la Atomic Energy Control Board, que es otro organismo federal. Se esta formando personal de cinco categorias: a) Directores: ingenieros encargados de la explotacion, el mantenimiento y la administracion; cambian periodicamente de puesto para familiarizarse con todos estos aspectos del trabajo; b) Operadores: cuatro grados de formacion, segun el trabajo que hayan de realizar; c) Encargados del equipo de control: cuatro grados de formacion; este personal es responsable del mantenimiento de todos los instrumentos, del equipo de control y del equipo electrico; d) Encargados del equipo mecanico: con diversos grados de formacion y varias especialidades (soldadura, fresado, ajuste, etc.); este personal es responsable del mantenimiento de todo el equipo mecanico; e) Personal auxiliar: encargado de una gran variedad de trabajos menos especializados que no requieren un alto grado de formacion. Se necesitan, ademas, algunos otros especialistas, entre ellos quimicos y expertos en proteccion radiologica. El autor de la memoria expone la forma en que esta organizado el personal de la central NPD y examina la cuestion de la formacion profesional teniendo en cuenta las necesidades que crea el desarrollo de la energia nucleoelectrica. (author) [Russian] Atomnaya demonstratsionnaya ehlektrostantsiya Kanady (NPD), vvedennaya v stroj federal'nym agentstvom ''Atomik

  8. 77 FR 38399 - Approval and Promulgation of Implementation Plans; Arizona; Nogales PM10

    Science.gov (United States)

    2012-06-27

    ... Estadistica Geografia e Informatica, (INEGI) 2010. \\5\\ ``Statistical Municipal Workbook for Nogales, Sonora... Instituto Nacional de Estadistica Geografia e Informatica (INEGI). While population estimates, by themselves...

  9. Performance of spanish wind turbines. Year 1996; Estadisticas de produccion de parques eolicos en Espana. Ano 1996

    Energy Technology Data Exchange (ETDEWEB)

    Lago, C.

    1998-04-01

    In this document we can find a statistical evaluation for the wind energy generation from each spanish wind farm referred to 1996 going on with the work that has been carried since 1992, by initiative of the Wind Energy Division from Renewable Energy Institute. The purpose of this work is to contribute with interesting information for the wind environment and offer a global view from monthly performance of different wind farms. (Author) 4 refs.

  10. Mathematics of statistical mechanics and the chaos theory; Las matematicas de la mecanica estadistica y de la teoria del caos

    Energy Technology Data Exchange (ETDEWEB)

    Llave, R. de la; Haro, A.

    2000-07-01

    Statistical mechanics requires a language that unifies probabilistic and deterministic description of physical systems. We describe briefly some of the mathematical ideas needed for this unification. These ideas have also proved important in the study of chaotic systems. (Author) 17 refs.

  11. Personal Docente del Nivel Primario. Series Estadisticas Basicas: Colombia (Teaching Personnel in Primary Schools. Basic Statistics Series: Colombia).

    Science.gov (United States)

    Ministerio de Educacion Nacional, Bogota (Colombia). Instituto Colombiano de Pedagogia.

    This document provides statistical data on the distribution and education of teacher personnel working in Colombian elementary schools between 1940 and 1968. The statistics cover the number of men and women, public and private schools, urban and rural location, and the amount of education of teachers. (VM)

  12. Performance of spanish wind turbines. Year 1995; Estadisticas de produccion de parques eolicos en Espana. Ano 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lago, C.

    1997-06-01

    In this document we can find a statistical evaluation for the wind energy generation from each spanish wind farm referred to 1995 going on with the work that has been carried out since 1992, by initiative of the Wind Energy Division from Renewable Energy Institute. The purpose of this work is to contribute with interesting information for the wind environment and offer a global view from monthly performances of different wind farms. (Author)

  13. Actitudes de Estudiantes Universitarios que Tomaron Cursos Introductorios de Estadistica y su Relacion con el Exito Academico en La Disciplina

    Science.gov (United States)

    Colon-Rosa, Hector Wm.

    2012-01-01

    Considering the range of changes in the instruction and learning of statistics, several questions emerge regarding how those changes influence students' attitudes. Equally, other questions emerge to reflect that statistics is a fundamental course in the university academic programs because of its relevance to the professional development of the…

  14. The Pulsed Neutron Technique Applied to Fast Non-Multiplying Assemblies; Application de la Methode des Neutrons Pulses aux Assemblages Non Multiplicateurs a Neutrons Rapides; Primenenie metoda impul'snykh nejtronov pri izuchenii povedeniya bystrykh nejtronov v nerazmnozhayushchikh sborkakh; Aplicacion de la Tecnica de los Neutrones Pulsados a Conjuntos Rapidos de Materiales No Multiplicadores

    Energy Technology Data Exchange (ETDEWEB)

    Beghian, L. E.; Wilensky, S. [Massachusetts Institute of Technology, Cambridge, MA (United States)

    1965-10-15

    Boltzmann qui est fonction du temps (c'est-a-dire une dimension, une vitesse). Les constantes de decroissance ont ete mesurees pour des plaques de plomb de 70 cm x 80 cm et de 5, 10, 15 et 20 cm d'epaisseur. Apres correction pour tenir compte de la degradation en energie et des dimensions finies de l'assemblage, les resultats sont compares aux solutions approchees de l'equation de transport de Boltzmann. (author) [Spanish] Los autores han empleado un acelerador Van de Graafi, que emitia rafagas de neutrones pulsados del orden del nanosegundo, para estudiar el comportamiento de los neutrones rapidos en conjuntos de metales no multiplicadores. Emplearon esta tecnica de la fuente de neutrones pulsados a fin de medir las secciones eficaces de dispersion inelastica de los neutrones rapidos en el Fe. El metodo empleado es analogo al utilizado para medir las secciones eficaces de absorcion en conjuntos termicos, salvo el hecho de que los tiempos de decrecimiento de los neutrones rapidos son del orden del nanosegundo mas bien que del microsegundo. En estos experimentos, se inyectaron rafagas de neutrones monoenergeticos, del orden del nanosegundo, en conjuntos de Fe de diversas dimensiones. Se observo que, en esos conjuntos, el flujo neutronico decrece exponencialmente con una constante caracteristica. Esta constante de decrecimiento esta constituida por una suma de terminos que representan la perdida de neutrones debidos al escape y a la degradacion energetica. Esta ultima representa una perdida de neutrones toda vez que se emplea un detector neutronico polarizado. El termino de eliminacion correspondiente a la dispersion elastica e inelastica puede determinarse midiendo la constante de decrecimiento en funcion de las dimensiones del conjunto de que se trate. Los autores exponen un procedimiento teorico que permite calcular la medida en que la dispersion elastica contribuye al termino de eliminacion, con lo que puede calcularse subsiguientemente la seccion eficaz de dispersion

  15. Extensions of the techniques for the accelerated unspecific isotopic labelling of organic compounds; Applications nouvelles des techniques accelererees du marquage non specifique de composes organiques; Rasprostranenie metodov uskoreniya mecheniya nespetsifichnymi izotopami organicheskikh slozhnykh soedinenij; Nuevas aplicaciones de las tecnicas de marcacion inespecifica acelerada de compuestos organicos

    Energy Technology Data Exchange (ETDEWEB)

    Ghanem, N A [National Research Centre, El-Dokki, Cairo (Egypt); Westermark, T [Division of Physical Chemistry, Royal Institute of Technology, Stockholm 70 (Sweden)

    1962-03-15

    marcar, y citar ejemplos en los que este procedimiento se ha empleado con exito. Las diversas tecnicas se basan en el uso de descargas de microondas y de ondas hertzianas, descargas luminiscentes producidas por corriente continua, o alterna, o sencillamente rayos ultravioleta. Se han obtenido cantidades considerables de productos purificados con actividades superiores a 100 mcuries/g. Los tiempos de exposicion a las descargas son del orden de un minuto, y en la mayoria de los casos se observo poca descomposicion. Los autores calcularon el rendimiento energetico alcanzado en estos metodos de marcacion y lo comparan con el correspondiente a las radiaciones ionizantes empleadas por Wilzbach y otros investigadores; tambien dan los valores de G para la sustitucion isotopica. Existen pruebas de que la marcacion del poliestireno se produce en virtud de una reaccion atomo-molecula. (author) [Russian] Tsel'yu nastoyashchego doklada yavlyaetsya rassmotrenie novykh sposobov uskoreniya reaktsii mezhdu radioaktivnym gazom i materialom misheni, podlezhashchim mecheniyu, a takzhe privedenie primerov uspeshnykh sluchaev. Ehti metody vklyuchayut ispol'zovanie razryadov mikrovoln i radiovoln, tleyushchikh razryadov pod vozdejstviem istochnikov postoyannogo ili peremennogo tokov, ili prosto radiatsii ul'trafioletovykh luchej. Byla dostignuta udel'naya aktivnost', dokhodyashchaya do 100 mikrokyuri na gramm, v znachitel'nykh kolichestvakh ochishchennogo produkta. Vremya vozdejstviya razryada bylo poryadka odnoj minuty, i vo mnogikh sluchayakh razlozhenie bylo chrezvychajno ogranichennym. Dayutsya podschety ehffektivnosti ispol'zovaniya ehnergii dlya proizvodstva mecheniya ehtimi metodami po sravneniyu s zatratoj dlya toj zhe tseli ehnergii ioniziruyushchego izlucheniya, ispol'zuemoj Vil'tsbakhom i dr. ; krome togo, ukazyvayutsya znacheniya radiatsionnokhimicheskogo vykhoda G dlya zameny izotopov. Est' ukazaniya na to, chto pri mechenii polistirola mekhanizm opredelyaetsya reaktsiej atom

  16. Technical evaluation of thermodynamics processes; Avaliacao tecnica dos processos termodinamicos

    Energy Technology Data Exchange (ETDEWEB)

    Petracco, Fulvio Celso

    1986-05-01

    An evaluation of thermodynamic processes, energy losses the origin of energy losses on thermodynamic process, where are the points or sources of those losses and variation of process when compared in relation of thermodynamic performance are discussed. The concept of energy losses and its origin, energy and work capacity, performance rates and examples of thermodynamic efficiency are also debated 3 figs.

  17. Handbook of laboratory techniques; Manual de tecnicas de laboratorio

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The Nuclear Regulatory Authority in Argentina have laboratories of support to regulations functions on radiological and nuclear safety, safeguards and physical protection, that have a surface of 2950 m{sup 2} in the Ezeiza Atomic Center. The manual describes in seven chapters the different techniques developed and applied in the laboratories along four decades of existence. The chapter 1: Dedicated to the treatment of environmental samples, described the procedures associated with the different types of samples: deposits, waters, sediments, vegetables, milk, fish and diet. The chapter 2: Details 48 radiochemical techniques associated to the measurements of americium 241, carbon 16, strontium 90, iodine 129, plutonium, radium 226, radon, uranium, nickel and actinides. The chapter 3: Describes the measurements techniques of alpha and gamma spectrometry. The different techniques of biological and physical dosimetry are described in the chapters 5 and 6 respectively. The final chapter is dedicated the techniques of external and internal contamination. It s important to emphasize that this manual contains the standardized technologies that the Nuclear Regulatory Authority of Argentina submits regularly to international comparisons.

  18. Comportamento termico de gorduras tecnicas produzidas no Brasil

    OpenAIRE

    Block, Jane Mara

    1992-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina. Centro de Ciencias Agrarias O mercado brasileiro de gorduras vegetais é constituído de ampla variedade de produtos hidrogenados para uso específico, principalmente a nível industrial. No presente trabalho, foram estudadas 6 amostras de bases hidrogenadas, 4 gorduras de uso geral, 2 gorduras para panificação, 2 gorduras para fritura, 1 gordura para sorvete, 2 gorduras para bombons, recheios e coberturas, 2 emulsões de uso ...

  19. RPC Production at General Tecnica: a mass scale production

    International Nuclear Information System (INIS)

    Della Volpe, D.; Morganti, S.

    2006-01-01

    The construction of LHC has deeply changed the RPC production. The enormous amount of detector needed and the strong requirements on gas volume quality had a deep impact on the production chain and on the QC and QA at the production site. This basically has brought the RPC from an almost hand-crafted detector to a medium scale mass product. The most critical aspects of the production chain have been modified and/or improved introducing new and more rigorous QC and QA procedures to guarantee the detector quality and improve the management of storage and the procurement on materials. Here it will be presented the work carried on in the last four year at the production site to improve and check the quality and the results achieved. Something like 10000 RPC were produced between 2002 and 2005. Also a preliminary and rough analysis on the efficiencies of the various phases in the chain production based on ATLAS production will be presented

  20. La religione come tecnica difensiva dell'identità soggettiva

    Directory of Open Access Journals (Sweden)

    Sergio Fabio Berardini

    2016-12-01

    Full Text Available Religion as a Defensive Technique for Subjective Identity - From a naturalistic perspective, the study of religion immediately leads to a problematic point: if religion is so widespread, to the extent that it seems to be a trait inscribed in human nature, then it should have adaptive advantages or, at the very least, it should not have disadvantages that would stand in the way of the survival of those who practice religion. In the former case, we need to understand the function of religion, viz. a utility it confers that may justify its persistence across human history. Against the backdrop of an anthropological model that considers subjectivity identity to be characterized by ontological fragility, this article will offer a special version of the claim that religion, viewed as a byproduct, has a positive function: we will make the hypothesis that it contributes to the defense of the unity of self-consciousness. Thus our focus will be on religion construed as a repertoire of strategies designed to protect the self.

  1. Andrea Capra, La tecnica di misurazione del Protagora

    Directory of Open Access Journals (Sweden)

    Maria Chiara Pievatolo

    2011-08-01

    Full Text Available Si tratta di un articolo uscito nel 1997 presso gli ���Annali della Scuola normale superiore di Pisa. Classe di lettere e filosofia”, pp. 273-327, ora liberamente disponibile perché depositato nell’archivio istituzionale dell’Università di Milano. Gli “Annali”, infatti, almeno nel momento in cui scrivo, risultano non accessibili in rete.  Questo è un danno grave per la [...

  2. Un test di confronto fra carte catastali e cartografia tecnica

    Directory of Open Access Journals (Sweden)

    Giorgio Bezoari

    2006-06-01

    Full Text Available Uno dei problemi più gravi che affligge l’Italia (peraltro madre di cartografi, topografi e geodeti è la dubbia qualità delle mappe catastali che purtoppo ad oggi versano in uno stato ancora lontano dal poter essere classificata come cartografia di base, sconfinando invece in una sorta di cartografia tematica che affronta appunto il tema della proprietà e dei tributi connessi. Il problema è sentito da decenni e già nel 1945 il CNR aveva proposto l’intera riorganizzazione del servizio geografico dello stato proponendo che gli sforzi deivari enti cartografici (IGM, Catasto, Aeronautica, Marina eGeologico venissero uniti sotto un’unica egida per la realizzazione della Cartografia dello Stato. Purtroppo abbiamo visto che questo non è successo e i problemi sono oggi venuti tutti al pettine così come vengono evidenziati nel presente articolo.

  3. Las carreras tecnicas: su importancia para el porvenir

    OpenAIRE

    Castillo Freire, Justo

    2008-01-01

    La Nanotecnología, la Ingeniería Genética, la Neurogénetica, la Biónica, devienen en prácticas tecnológicas encargadas de mantener y mejorar las cualidades intrínsecas del ser humano. La Mecacuántica, la Electrónica, la Informática, la Inteligencia Artificial, la Robótica, crean condiciones de apoyo al desempeño de funciones corporales y cerebrales.

  4. A New Technique for Determining the Distribution of Radium and Thorium in Living Persons; Determination de la Repartition du Radium et du Thorium chez les Personnes Vivantes: Une Methode Nouvelle; Novyj metod opredeleniya raspredeleniya radiya i toriya u patsientov; Nueva Tecnica para Determinar la Distribucion del Radio y del Torio en Pacientes

    Energy Technology Data Exchange (ETDEWEB)

    Miller, C. E. [Argonne National Laboratory, Health Division, Argonne, IL (United States)

    1964-10-15

    superieure a la moyenne dans la partie inferieure des jambes, dans le pelvis ou dans le crane. Les sommes des sources calculees'concordent, a quelques pour-cents pres, avec'les mesures de la charge corporelle totale de radium obtenues au moyen d'autres techniques d'anthropogammametrie. Les mesures faites sur deux malades qui avaient recu.du thorotrast il y a environ dix-huit ans ainsi que sur des fantomes contenant dli thorotrast et RdTh ont egalement mis en evidence la possibilite de mesurer l'inhomogeneite de la repartition de {sup 208}Tl(ThC{sup )}, {sup 228}Ac (MsTh{sup 2}), et aussi sans doute de {sup 212}Pb, le long de l'axe du corps. (author) [Spanish] Los antropogammametros se vienen usando tradicionalmente para medir la radiactividad de las personas sin atender-a la distribucion interna. En el caso de los radioisotopos osteofilos, tales como el radio, interesa conocer por lo menos su distribucion aproximada dentro del esqueleto, a fin de poder estudiar la naturaleza de la respuesta a la dosis. Las tecnicas descritas en la memoria se idearon para poder descubrir cualquier heterogeneidad sustancial en la distribucion del radio en pacientes que no pueden o no desean yacer inmoviles mas de una hora. Un cristal cilindrico recto, de diseno nuevo, de 15 cm de diametro por 20 cm de longitud,- se coloca a una altura de 30 cm sobre -la superficie de una camilla rigida, con el eje del cristal horizontal y perpendicular a la direccion de la columna vertebral del paciente, acostado en posicion supina. Se usa este cristal en lugar del cilindro vertical chato tipico, con la intencion de que las areas superficiales y las secciones transversales del cristal, observadas desde cualquier punto del cuerpo del paciente, tengan la misma forma. Se obtienen los espectros de rayos gamma del paciente en posicion supina y de las fuentes radiactivas puntiformes ubicadas en el centro de maniquies de madera prensada, con el cristal situado en un numero x de posiciones uniformemente espaciadas a

  5. Eradication of White Grub (Melolontha Vulgaris F.) by the Sterile - Male Technique; Eradication du ver blanc (Melolontha Vulgaris F.) par la methode du lacher de males steriles; Unichtozhenie lichinok majskogo zhuka (Melolontha Vulgaris F.) metodom sterilizatsii muzhskikh osobej; Erradicacion de la larva del abejorro (Melolontha Vulgaris F.) por la tecnica de los machos esterilizados

    Energy Technology Data Exchange (ETDEWEB)

    Horber, E. [Swiss Experimental Station for Agriculture, Zurich-Oerlikon (Switzerland)

    1963-09-15

    observe une certaine diminution des larves en b) et c), due a la secheresse qui regnait dans toute la region. Il a ete demontre que la methode du lacher de males steriles peut etre appliquee avec succes dans la lutte contre un insecte nuisible qui se trouve dans une region qui n'est pas strictement isolee du point de vue geographique, dont les femelles s'apparient plusieurs fois et dont l'elevage en masse est impossible en raison de la duree du cycle evolutif. (author) [Spanish] Ensayos realizados en laboratorio indicaron que para esterilizar a los abejorros machos basta con una dosis de rayos X de 3000 roentgens. Durante dos periodos de vuelo se soltaron machos esterilizados en una region agricola del noroeste de Suiza con objeto de erradicar las larvas. En 1950 esta plaga habia sido combatida con procedimientos quimicos. Entre 1953 y 1962 se observo la actividad en todos los vueles. En 1959 se seleccionaron cinco zonas de 30 hectareas cada una que sirvieron de: a) Zona de tratamiento, en la que se capturaron, irradiaron y soltaron machos; b) Zona de reserva, en la que se recogieron abejorros y se irradiaron machos que se soltaron en a); c) Zonas de control, en las que se observo la actividad normal. Los machos fueron irradiados con un aparato terapeutico de rayos X. Despues de la irradiacion se les puso una marca de color para poder calcular su porcentaje mediante la tecnica de dilucion isotopica. En 1959, durante el primer tratamiento, se soltaron en la zona a unos 6 l de machos esterilizados, lo que representaba aproximadamente el 50% del total de machos de dicha zona. La cantidad de larvas recogidas en los prados despues del tratamiento represento unos 2/3 de la correspondiente a las zonas de control. La razon de reproduccion solo fue inferior a la unidad en la zona a). Cuando se calculo, en 1962, el numero de abejorros supervivientes se observo que en la zona a habia disminuido hasta 1/10 en comparacion con las zonas b) y c). De 1959 a 1962 la cifra mas elevada de

  6. Charge-storage techniques for pulse-height analysis; Techniques de stockage electrostatique pour l'analyse en amplitude d'impulsion; Metod nakopleniya zaryada dlya amplitudnogo analiza impul'sov; Tecnicas de almacenamiento de cargas para analisis de amplitud de impulsos

    Energy Technology Data Exchange (ETDEWEB)

    Costrell, L; Brueckmann, R E [National Bureau of Standards, Washington, DC (United States)

    1962-04-15

    investigaciones realizadas en el National Bureau of Standards (NBS). Los autores han construido un analizador de almacenamiento de cargas que se esta empleando con el sincrotron de 180 MeV del NBS en un experimento de absorcion nuclear que, sin ese aparato, presentaria obstaculos considerables. El analizador almacena temporalmente por medios electrostaticos los datos de amplitud de impulsos durante las rafagas del acelerador y en los intervalos entre rafagas, analiza el contenido del almacenamiento temporal, para pasarlos seguidamente a una memoria convencional de nucleo magnetico. Los datos presentados confirman la posibilidad de emplear esta tecnica para impulsos del orden del nanosegundo. (author) [Russian] Nizkie rabochie tsikly mnogikh impul'snykh uskoritelej delayut neobkhodimymi vysokie chastoty sledovaniya impul'sov vo vspyshkakh dlya sbora dostatochnykh dannykh v techenie razumnogo perioda vremeni. Ne tol'ko soobrazheniya ehkonomii, na kotorye vliyaet dorogostoyashchee mashinnoe vremya, zastavlyayut ispol'zovat' vysokie chastoty sledovaniya impul'sov, no i chisto tekhnicheskie soobrazheniya chasto delayut nevozmozhnymi ehksperimenty, esli chastota sledovaniya impul'sov na vspyshku nedostatochno velika dlya togo, chtoby isklyuchit' Nizkie rabochie tsikly mnogikh impul'snykh uskoritelej delayut neobkhodimymi vysokie chastoty sledovaniya impul'sov vo vspyshkakh dlya sbora dostatochnykh dannykh v techenie razumnogo perioda vremeni. Ne tol'ko soobrazheniya ehkonomii, na kotorye vliyaet dorogostoyashchee mashinnoe vremya, zastavlyayut ispol'zovat' vysokie chastoty sledovaniya impul'sov, no i chisto tekhnicheskie soobrazheniya chasto delayut nevozmozhnymi ehksperimenty, esli chastota sledovaniya impul'sov na vspyshku nedostatochno velika dlya togo, chtoby isklyuchit' ispol'zovanie obychnykh amplitudnykh analizatorov impul'sov. Po ehtim prichinam mnogo usilij udeleno razrabotke vysokoskorostnykh amplitudnykh analizatorov impul'sov dlya ispol'zovaniya s impul'snymi uskoritelyami

  7. The Measurement of Reactivity In Multiregion Subcritical Systems by the Pulsed Neutron Technique; Mesure de la Reactivite dans les Systemes Sous-Critiques a Plusieurs Regions par la Methode des Neutrons Pulses; Izmerenie reaktivnosti v mnogozonnykh podkriticheskikh sistemakh metodom impul'snykh nejtronov; Mediciones de la Reactividad en Sistemas Subcriticos de Varias Regiones Mediante la Tecnica de los Neutrones Pulsados

    Energy Technology Data Exchange (ETDEWEB)

    Sherwin, J.; Leng, J. H. [United Kingdom Atomic Energy Authority, Windscale Works, Cumberland (United Kingdom)

    1965-10-15

    se obtuvo en el reactor avanzado de Windscale, refigerado con gas, cuyo funcionamiento se interrumpio deliberadamente por un envenenamiento uniforme. En el segundo caso se hizo variar la reactividad del cuerpo del reactor 'HERO' de potencia nula modificando el radio de la zona cargada. Todas las mediciones de los impulsos ncuironicos concuerdan satisfactoriamente con las obtenidas por otros metodos mas clasicos de determinacion de la reactividad. Por ultimo, los autores examinan las tecnicas experimentales y las dificultades encontradas en los sistemas moderados con grafito. (author) [Russian] Mgnovennyj raspad termalizovannoj vspyshki nejtronov v mnogojeonnoj podkriticheskoj sisteme izuchalsja s pomoshh'ju dvuhgruppovoj teo- rii diffuzii. Pokazyvaetsja, chto mozhno ustanovit' svjaz' mezhdu postojannoj mgnovennogo raspada osnovnogo sostojanija i kojefficientom jeffektivnogo razmnozhenija sistemy v ramkah dvuh opredelennyh parametrov dlja celej publikuemogo doklada v kachestve kojefficienta chuvstvitel'nosti reaktora i popravki na mgnovennyj raspad, kotorye zavisjat v bol'shoj stepeni ot prostranstvennogo razmeshhenija potokov v sisteme. Pri odnorodnoj sisteme bez otrazhatelja kojefficient chuvstvitel'nosti mozhno ustanovit' pri opredelenii srednego perioda zhizni nejtrona v sisteme, dlja mnogozonnoj sistemy takoj kojefficient predstavljaet soboj sochetanie periodov zhizni v kazhdoj zone, uslozhnennyh in- tegralami vozmushhenija. Vtoroj parametr, popravka na raspad mozhet che imet' fizicheskogo smysla v svjazi s tem, chto ona pojavljaetsja pri popytke ustanovit' svjaz' mezhdu dvumja so- otvetstvujushhimi masshtabami reaktivnosti, to-est' masshtabom pri opredelenii kotorogo ispol'zuetsja postojannaja mgnovennogo raspada, i masshtabom, vyvodimym s ispol'zovaniem kojefficienta jeffektivnogo razmnozhenija. Izuchajutsja svojstva jetih parametrov s uporom na reaktor s obogashhennym uranom i grafitovym zamedlitelem, sostojashhij iz odnorodnoj aktivnoj zony i otrazhatelja, i

  8. Diffuse Scattering from Alloys and Disordered Systems: Experimental Techniques and Potentialities; Diffusion dans les Alliages et les Systemes Desordonnes; Methodes Experimentales et Possibilites d'Application; Diffuznoe rasseyanie na splavakh i razuporyadochennykh sistemakh. ehksperimental'nye metody i potentsial'nye vozmozhnosti; Dispersion Difusa en Aleaciones y Sistemas Desordenados; Tecnicas Experimentales y Posibilidades

    Energy Technology Data Exchange (ETDEWEB)

    Low, G. G. [Atomic Energy Research Establishment, Harwell, Berks (United Kingdom)

    1965-04-15

    la direccion de magnetizacion con respecto al vector de dispersion neutronica. De este modo, la dispersion de interes puede distinguirse de los efectos no magneticos como diferencia entre dos intensidades medidas. Un proceso que contribuye al fondo de dispersion difusa, en parte de caracter magnetico y que, por tanto, la mencionada tecnica no elimina, es la dispersion miiltiple de Bragg en un poli- cristal magnetico. Puede prevenirse utilizando una muestra monocristalina o empleando neutrones de gran longitud de onda, de forma que impidan los procesos de Bragg. En Harwell se ha construido un instrumento basado en este principio, que se utiliza para una amplia serie de mediciones en aleaciones ferromagneticas diluidas. Se examinan estos experimentos y otras novedades que cabe anticipar en la materia, entre ellas la medicion de la dispersion magnetica difusa en sales paramagneticas. El estudio de esta dispersion reviste enorme interes, pues proporciona informacion dilecta sobre la cantidad de spin transmitida por un ion magnetico a los ligandos que le rodean como resultado de la covalencia. (author) [Russian] Zadachej nastojashhej raboty javljaetsja rassmotrenie kak v principe, tak i s prakticheskoj tochki zrenija teh vidov dannyh, kotorye mozhno poluchit' v rezul'tate izuchenija neuprugogo diffuznogo rassejanija nejtronov. Vnimanie skoncentrirovano na teh sistemah, v kotoryh imeetsja razuporjadochen- noe raspolozhenie defektov, kazhdyj iz kotoryh mozhno uslovno schitat' ne podverzhennym vlijaniju drugih imejushhihsja defektov libo v rezul'tate razbavlenija, libo v rezul'tate otsutstvija zavisimosti ot okruzhenija. Pri jetih uslovijah intensivnost' rassejanija proporcional'na kvadratu modulja razlozhenija Fur'e po vozmushheniju v amplitude rassejanija, vyzvannomu defektom. Takim obrazom, dannye ob amplitude prostranstvennogo raspredelenija rassejanija defektov mogut byt' polucheny v rezul'tate vypolnenija sootvetstvujushhih izmerenij rassejanija nejtronov i

  9. The Combined Use of Autoradiographic and Electron Microscopic Techniques for Studies on Ultra-Thin Sections of Tritium-Labelled Cells of the Intestinal Epithelium; Emploi Combine de l'Autoradiographie et du Microscope Electronique pour L'Etude de Coupes Ultra-Fines de Cellules Tritiees de l'Epithelium Intestinal; 0421 043e 0432 043c 0435 0414 ; Empleo Combinado de Tecnicas de Autorradiografia y de MicroscopiA Electronica para Estudiar Cortes Ultrafinos de Celulas Tritiadas del Epitelio Intestinal

    Energy Technology Data Exchange (ETDEWEB)

    Hampton, J. C. [Division of Experimental Biology, Baylor University College of Medicine, TX (United States); Quastler, H. [Brookhaven National Laboratory, Upton, Long Island, NY (United States)

    1962-02-15

    tomado las micrografias electronicas adecuadas y aplicar una capa de emulsion suficientemente gruesa como para obtener una autorradiografia, pero, al mismo tiempo, bastante delgada como para permitir un nuevo examen de la muestra en el microscopio electronico y obtener micrografias electronicas de las autorradiografias de las celulas examinadas previamente. La emulsion autorradiografica se aplico en la siguiente forma: se formo primeramente una pelicula delgada sumergiendo un pequeno ojal de alambre en una emulsion liquida y trasladando la pelicula mediante el recurso de pasar el ojal sobre la muestra montado sobre un soporte, fijado a su vez en el extremo de una clavija de material plastico. El control adecuado se puede lograr tomando una seccion de media miera de espesor despues de cada operacion de corte, montandola sobre una placa de vidrio y aplicando luego las tecnicas autorradiograficas usuales. Debido a la fragilidad de los cortes ultrafinos, la proporcion de autorradiografias satisfactorias es bastante reducida. A pesar de este inconveniente, se espera que una vez perfeccionada la tecnica y adquirido experiencia en su manejo, este metodo permitira comprender mejor procesos que se verifican en las celulas vitales. (author) [Russian] Osvoennaja v nastojashhee vremja vozmozhnost' dostizhenija vysokoj razreshajushhej sposobnosti v izuchenii kletochnyh srezov pri pomoshhi jelektronnogo mikro- skopa otkryvaet puti k nabljudeniju za nekotorymi mezhkletochnymi javlenjami, vedushhimi k sintezu proteinov. Osobennosti pogloshhenija tritirovannogo timi- dina dezoksiribonukleinovoj kislotoj obrazujut sistemu, otkryvajushhuju vozmozhnost' tochnogo nabljudenija za vremenem ee proniknovenija i mestom ee sos- redotochenija v kletke. V dokladyvaemoj zdes' rabote pokazyvaetsja, chto sverh- tonkie srezy mechenyh kletochek mozhno izuchit' pri pomoshhi jelektronnogo mikroskopa, a zatem, posle poluchenija nuzhnoj mikrografii, vynut' obrazec, pokryt' ego plenkoj jemul'sii dostatochno

  10. On Negations and Algebras in Fuzzy Set Theory

    Science.gov (United States)

    1986-03-19

    Esteva Departament de Matematiques i Estadistica ~ Universitat Politecnica de Catalunya Diagonal 649 08028 Barcelona !Spain) ABSTRACT Dual... Estadistica Universitat Politecnica de Catalunya Diagonal 649 08028 Barcelona (Spain) In Zadeh’s definition of Fuzzy Sets [1] the operations are defined

  11. Software development for statistical handling of dosimetric and epidemiological data base; Programacion para la explotacion estadistica de los bancos de datos dosimetrico y epidemiologico

    Energy Technology Data Exchange (ETDEWEB)

    Amaro, M

    1990-07-01

    The dose records from different groups of occupationally exposed workers are available in a computerized data base whose main purpose is the individual dose follow-up. Apart from this objective, such a dosimetric data base can be useful to obtain statistical analysis. The type of statistical n formation that can be extracted from the data base may aim to attain mainly two kinds of objectives: - Individual and collective dose distributions and statistics. -Epidemiological statistics. The report describes the software developed to obtain the statistical reports required by the Regulatory Body, as well as any other type of dose distributions or statistics to be included in epidemiological studies A Users Guide for the operators who handle this software package, and the codes listings, are also included in the report. (Author) 2 refs.

  12. Personal Docente del Nivel Primario. Series Estadisticas Basicas, Nivel Educativo: Caldas (Teaching Personnel in Primary Schools. Basic Statistics Series, Level of Education: Caldas).

    Science.gov (United States)

    Ministerio de Educacion Nacional, Bogota (Colombia). Instituto Colombiano de Pedagogia.

    This document provides statistical data on the distribution and education of teaching personnel working in the elementary schools of Caldas, Colombia, between 1958 and 1967. The statistics cover the number of men and women, public and private schools, urban and rural location, and the amount of education of the teachers. For overall statistics in…

  13. Personal Docente des Nivel Primario. Series Estadisticas Basicas, Nivel Educativo: Narino (Teaching Personnel in Primary Schools. Basic Statistics Series, Level of Education: Narino).

    Science.gov (United States)

    Ministerio de Educacion Nacional, Bogota (Colombia). Instituto Colombiano de Pedagogia.

    This document provides statistical data on the distribution and education of teaching personnel working in the elementary schools of Narino, Colombia, between 1958 and 1967. The statistics cover the number of men and women, public and private schools, urban and rural location, and the amount of education of the teachers. For overall statistics in…

  14. Personal Docente del Nivel Primario. Series Estadisticas Basicas, Nivel Educativo: Cauca (Teaching Personnel in Primary Schools. Basic Statistics Series, Level of Education: Cauca).

    Science.gov (United States)

    Ministerio de Educacion Nacional, Bogota (Colombia). Instituto Colombiano de Pedagogia.

    This document provides statistical data on the distribution and education of teaching personnel working in the elementary schools of Cauca, Colombia, between 1958 and 1967. The statistics cover the number of men and women, public and private schools, urban and rural location, and the amount of education of the teachers. For overall statistics in…

  15. Personal Docente del Nivel Primario. Series Estadisticas Basicas, Nivel Educativo: Cordoba (Teaching Personnel in Primary Schools. Basic Statistics Series , Level of Education: Cordoba).

    Science.gov (United States)

    Ministerio de Educacion Nacional, Bogota (Colombia). Instituto Colombiano de Pedagogia.

    This document provides statistical data on the distribution and education of teaching personnel working the elementary schools of Cordoba, Colombia, between 1958 and 1967. The statistics cover the number of men and women, public and private schools, urban and rural location, and the amount of education of the teachers. For overall statistics in…

  16. Personal Docente del Nivel Primario. Series Estadisticas Basicas, Nivel Educativo: Boyaca (Teaching Personnel in Primary Schools. Basic Statistics Series, Level of Education: Boyaca).

    Science.gov (United States)

    Ministerio de Educacion Nacional, Bogota (Colombia). Instituto Colombiano de Pedagogia.

    This document provides statistical data on the distribution and education of teaching personnel working in the elementary schools of Boyaca, Colombia, between 1958 and 1967. The statistics cover the number of men and women, public and private schools, urban and rural location, and the amount of education of the teachers. For overall statistics in…

  17. Personal Docente del Nivel Primario. Series Estadisticas Basicas, Nivel Educativo: Huila (Teaching Personnel in Primary Schools. Basic Statistics Series, Level of Education: Huila).

    Science.gov (United States)

    Ministerio de Educacion Nacional, Bogota (Colombia). Instituto Colombiano de Pedagogia.

    This document provides statistical data on the distribution and education of teaching personnel working in the elementary schools of Huila, Colombia, between 1958 and 1967. The statistics cover the number of men and women, public and private schools, urban and rural location, and the amount of education of the teachers. For overall statistics in…

  18. Impact of statistical uncertainty of the neutron spectrum in the isotopic evolution of fuel; Impacto de la incertidumbre estadistica del espectro neutronico en la evoluacion isotopica del combustible

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, P.

    2012-07-01

    The results obtained and presented in this study for different calculation conditions (number of stories, number of steps burning, etc.) and their simultaneous impact on neutron spectrum and isotopic composition and a methodology is proposed to determine the minimum parameters for calculation given uncertainty in the results of isotopic composition with high burnup, both UO{sub 2} and MOX fuel.

  19. Treatment interruptions: Statistics, causes and management in service radiotherapy; Interrupciones de tratamiento: estadistica, causa y manejo en un servicio de radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Ferrando Sanchez, A.; Milanes Gaillet, A. I.; Eugui Martinez, R.; Crespo Diaz, M. P.

    2013-07-01

    Despite the clinical maximum administer the prescribed dose at a given time, treatment interruptions are unavoidable in practice. In tumors quickly reproduce no evidence that the prolongation thereof entails loss of tumor control. It has tracked two of these conditions: squamous cell cancer of the head and neck (SCCHN) and lung cancer (NSCLC) over 2011 and 2012 to evaluate both the number of stops treatment as the reason for them and its management. (Author)

  20. Statistics of electron multiplication in a multiplier phototube; Iterative method; Estadistica de la multiplicacion de electrones en un fotomultiplicador: Metodos iterativos

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, J F; Grau, A

    1985-07-01

    In the present paper an iterative method is applied to study the variation of dynode response in the multiplier phototube. Three different situation are considered that correspond to the following ways of electronic incidence on the first dynode: incidence of exactly one electron, incidence of exactly r electrons and incidence of an average r electrons. The responses are given for a number of steps between 1 and 5, and for values of the multiplication factor of 2.1, 2.5, 3 and 5. We study also the variance, the skewness and the excess of jurtosis for different multiplication factors. (Author) 11 refs.

  1. Technique for the Measurement of Low-Level Radioactivity of Organic Iodine in Large-Volume Urine Samples; Technique de Mesure de la Faible Radioactivite de l'Iode Organique Contenu dans des Echantillons d'Urine de Grand Volume; Metod izmereniya nizkikh aktivnostej organicheskogo joda v krupnykh obraztsakh mochi; Tecnicas de Medicion de Bajas Actividades de Yodo Organico Contenido en Muestras de Orina de Gran Volumen

    Energy Technology Data Exchange (ETDEWEB)

    Nicolesco-Zinca, D.; Matei, I. [Institut d' Endocrinologie de l' Academie Roumaine, Bucarest (Romania)

    1965-10-15

    'une dose radioactive au moins 50 fois plus faible que celle qu'exige la methode classique. On peut ainsi separer la diiodotyrosine et la recuperer dans un echantillon de 40-50 ml d'urine (avec une erreur standard de 0,42% dans un laps de temps de quelques heures) en utilisant une installation a cristal a scintillation de Nal(Tl) creux, que l'on trouve couramment dans les laboratoires de medecine nucleaire. (author) [Spanish] La determinacion de la excrecion renal de yodo en forma de compuestos organicos marcados in vitro plantea dos serios problemas en endocrinologia nuclear: a) su separacion cuantitativa del yoduro tambien presente en la orina, incluso cuando la concentracion de este ultimo es veinte veces mayor; b) la determinacion de su debil actividad enmuetras de orina de gran volumen, y que su concentracion por mililitro de orina representa aproximadamente 10{sup -5} de la radiactividad administrada que, a su vez, debe ser lo mas baja posible. La separacion suele efectuarse por cromatografia sobre papel, para lo cual solo se utilizan pequenas muestras de orina. Esta tecnica es laboriosa y exige mucho tiempo y aparatos para cromatografia. Al proceder a la determinacion de la radiactividad sobre el papel, se encuentra una contaminacion de toda la tira. A pesar de las correcciones aplicadas, se recupera solamente el 89,9% de la radiactividad, y atin menos si se emplea un extracto butanolico. Los autores recurren a una tecnica consistente en hacer pasar un gran volumen de orina por una micro- columna de resina cationica en su forma hidrogenada. Los compuestos organicos del radioyodo quedan retenidos en la resina y se determinan midiendo la radiactividad de la columna con una sonda de centelleo de cristal de Nal hueco. Los autores comprobaron que la recuperacion de la diyodotirosina de la orina es practicamente cuantitativa, siendo el error tipo de 0,42% para diez experimentos. El metodo se ha empleado para determinar la desyodacion de la diyodotirosina en 11 pacientes

  2. Use of the Neutron Die-Away Technique to Test Control Rod Effectiveness Theories; Emploi de la Methode d'Absorption des Neutrons pour Verifier les Theories sur l'Efficacite des Barres de Commande; Ispol'zovanie metoda spada potoka nejtronov dlya proverki teorij ehffektivnosti reguliruyushchikh sterzhnej; Aplicacion de la Tecnica de Extincion Neutronica a la Verificacion de las Teorias sobre la Eficacia de las Barras de Control

    Energy Technology Data Exchange (ETDEWEB)

    Perez, R. B. [University of Florida, Gainesville, FL (United States); De Saussure, G.; Silver, E. G. [University of Florida, Gainesville, FL (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    1964-04-15

    . Les theories, qui ont ete verifiees sont celles de: 1. Nordheim-Scalettar, 2. Hurwitz-Roe, 3. et celle du code de diffusion numerique. Les auteurs ont calcule l'effet des barres cruciformes a l'aide de la methode de transformation conforme de Hurwitz-Roe et ont trouve pour le laplacien la valeur de 0,0188 cm{sup -2} qui est voisine du resultat de l'experience, 0,0187 {+-} 0,0006 cm-2. Pour les barres epaisses, les previsions de la theorie de Nordheim-Scallettar et de la theorie du code de diffusion depassent les resultats experimentaux d'environ lOyeo. Les deux methodes ont toutefois etabli des previsions correctes en ce qui concerne l'interaction entre les barres epaisses. Pour les barres minces, la methode Nordheim-Scalettar est extremement precise. On peut s'attendre a trouver l'ecart constate pour les barres epaisses, lorsqu'on utilise la theorie de diffusion pour calculer l'effet des barres ayant une section de dimensions comparables a celle du libre parcours moyen des neutrons dans le ralentisseur. On procede actuellement a des mesures avec des banes de dimensions intermediaires pour determiner le point a partir duquel la theorie de la diffusion n'est plus valable. (author) [Spanish] El calculo de la eficacia de las barras de control se complica por el hecho de que esta depende a la vez de la distribucion de las energias neutronicas y de la geometria del conjunto. Cuando se trata de comparar los datos teoricos con los resultados experimentales obtenidos en otros reactores o en sistemas subcriticos, surgen dificultades derivadas de la complejidad intrinseca de tales sistemas. La tecnica de la extincion neutronica brinda la posibilidad de establecer un modelo neutronico integramente termico, en el cual el efecto de la distribucion de energias neutronicas se puede separar de los efectos espaciales. Por lo tanto, es dable estudiar el factor geometrico de la eficacia de las barras de control sin reparar en las caracteristicas del espectro neutronico y luego es

  3. A Technique of Culturing the Olive Fly, Dacus Oleae Gmel., on Synthetic Media Under Xenic Conditions; Methode d'elevage de la mouche de l'olive Dacus Oleae Gmel., en xenie sur milieux synthetiques; Metodika ksenicheskoj kul'tivatsii maslinnoj mukhi Dacus Oleae na sinteticheskoj srede; Una tecnica de cria de la mosca del olivo (Dacus Oleae Gmel.) en un medio sintetico en condiciones xenicas

    Energy Technology Data Exchange (ETDEWEB)

    Hagen, K. S.; Santas, L.; Tsecouras, A. [Agricultural College of Athens. Athens (Greece)

    1963-09-15

    qui a ete mis au point permet l'elevage en masse, mais il faudrait proceder a de nouvelles recherches pour decouvrir une methode plus rapide pour placer les oeufs sur ce milieu. Il faudrait perfectionner les inhibiteurs de moisissure et mettre au point d'autres milieux d'un prix de revient moins eleve. (author) [Spanish] Se han criado cinco generaciones de Dacus oleae en un medio a base de agar y de zanahoria deshidratada que contenia un hidrolizado enzimatico de proteinas de soja o de caseina, levadura de cerveza, cloruro de colina y aceite de oliva. Aunque la tecnica de cria es xenica, se ha tratado de controlar quimicamente el desarrollo de los microorganismos. Una especie bacteriana ha reemplazado el simbiota normal del D. oleae y su presencia parecia indispensable, pero se han criado dos generaciones de D. oleae sin bacteria alguna en los lugares que el simbiota caracteristico ocupa normalmente en la larva o en el adulto. Para evitar la infeccion bacteriana de los huevos se anade ahora estreptomicina al alimento de los adultos. El desarrollo de las larvas y el tamano y la reproduccion de los insectos son normales. El medio preparado para las larvas permite la cria en masa, pero seria necesario efectuar nuevas investigaciones a fin de descubrir un metodo mas rapido para colocar los huevos en ese medio. Tambien convendria estudiar nuevos anticriptogamicos y encontrar productos que permitieran preparar un medio menos costoso. (author) [Russian] D. oleae kul'tivirovali na srede agar-obezvozhennaya morkov', soderzhashchej ehnzimaticheskij gidroliehat soevogo ili kazeinovogo belka, pivnye drozhi, khlorid kholina i olivkovoe maslo. Nesmotrya na ksenicheskuyu metodiku kul'tivatsii, sdelana popytka kontrolirovat' mikroorganizmy khimicheskimi sredstvami. Bakterial'nye raznovidnosti zamenyali vnutri D. oleae normal'nyj simbiot, chto, kak polagali, yavlyalos' vazhnym dlya sokhraneniya vida. Odnako u dvukh pokolenij D. oleae ne obnaruzheno kakikh-libo bakterij v uchastkakh

  4. Modos de produccion cientifica: Culturas y metodologias de investigacion en la Universidad de Cadiz

    Science.gov (United States)

    Gonzalez Ramos, Ana M.

    2004-12-01

    Este trabajo de investigacion supone un modelo teorico de caracter aplicado, que proporciona la oportunidad de evaluar la produccion cientifica de los investigadores. Se encuadra dentro de la tradiccion de la estadistica aplicada y la sociologia del conocimiento. Atiende especialmente a dos conjuntos de temas de interes, por una parte, las caracteristicas principales que determinan el nivel y tipo de produccion academica producida por las unidades de investigacion y por los propios investigadores; por otra, la utilizacion que se hace de los metodos y tecnicas de investigacion puesto que de ello tambien depende el modo de produccion cientifica. Los puntos novedosos de esta tesis son: la medicion cuantitativa del objeto de estudio, la suma de los productos y las condiciones externas a la produccion del conocimiento mas otros elementos internos como las caracteristicas de los investigadores y la metodologia utilizada para desarrollar sus trabajos; y, finalmente, el uso de las nuevas tecnologias. El aprovechamiento de los recursos estadisticos y las fuentes de informacion secundarias se complementan con el diseno propio de una encuesta donde se implementa las caracteristicas descritas en un capitulo anterior sobre los metodos cientificos mas idoneos descritos en los principales manuales y articulos cientificos desde distintas disciplinas de conocimiento. Dicha encuesta ha sido desarrollada como un programa propio y en base a los mas innovadores usos de la tecnologia en la metodologia de encuestas.

  5. Some Techniques for Isolating and Using Short-Lived Radioisotopes; Quelques Methodes d'Isolement et d'Utilisation des Radioisotopes a Courte Periode; НЕКОТОРЫЕ МЕТОДЫ ПОЛУЧЕНИЯ И ИСПОЛЬЗОВАНИЯ КОРОТКОЖИВУЩИХ ИЗОТОПОВ; Algunas Tecnicas de Aislamiento y Empleo de Radioisotopos de Periodo Corto

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, F.; Kraus, K. A. [Chemstry Division, Oak Ridge National Laboratory, Oak Ridge, TN (United States)

    1963-03-15

    obtenus recemment Inverted-Question-Mark l'aide de cette methode pour la mesure de la solubilite de LaF{sub 3} dans des solutions d'acide chlorhydrique et d'acide perchlorique. La deuxieme est une methode rapide pour la mesure des coefficients de diffusion dans des systemes liquides. De minces frittes de porcelaine poreuse sont saturees avec une solution contenant un radioisotope, puis rapidement eluees avec une solution necontenantpasd'indica- teur. On peut calculer les coefficients de diffusion d'apres la diminution du taux de comptage de la fritte avec le temps, apres etalonnage avec une matiere dont on connait la vitesses de diffusion. En raison du court chemio de diffusion utilise, les mesures peuvent etre faites en un laps de temps relativement plus court que par les methodes classiques (cellule a diaphragme ou tube capillaire). (author) [Spanish] En el Oak Ridge National Laboratory se vienen utilizando frecuentemente radioisotopos de muchos elementos para llevar a cabo estudios de intercambio ionico, solubilidad y de otros procesos fisicoquimicos. El empleo de radioisotopos de periodo corto obligo a encontrar metodos rapidos para prepararlos y purificarlos, asi como tecnicas especiales para conseguir datos utiles en un tiempo relativamente corto, con frecuencia pocos minutos. La memoria describe algunos de los metodos .recientemente perfeccionados para preparar y purificar isotopos de periodo corto, especialmente los que proceden de materiales irradiados con neutrones, incluso elementos fisionables. Como es natural, estos Ultimos constituyen una materia prima adecuada para obtener toda una serie de radioisotopos de periodo corto muy utiles, como son el {sup 99}Mo, y el {sup 132}Te, y se describen metodos para aislar rapidamente por intercambio ionico estos y otros productos de fision exentos de portador. Tambien se describen metodos para separar elementos descendientes de periodo corto de sus precursores de periodo largo por tecnicas de separacion repetida en las

  6. A novel time-to-pulse height converter for fast-neutron time-of-flight techniques; Nouveau convertisseur temps-amplitude d'impulsions pour les mesures du temps de vol des neutrons rapides; Novyj vremya-amplitudnyj preobrazovatel' impul'sov dlya izmereniya vremeni proleta bystrykh nejtronov; Nuevo convertidor tiempo-altura de impulsos para tecnicas de tiempo de vuelo de neutrones rapidos

    Energy Technology Data Exchange (ETDEWEB)

    Christiansen, J [Physikalisches Staatsinstitut, Hamburg, Federal Republic of Germany (Germany)

    1962-04-15

    } s con coincidencias gamma obtenidas de una fuente de {sup 60}Co y utilizando cristales plasticos NE 102, y de 2{tau} = 1,4 {center_dot} 10{sup -9} con coincidencias gamma de 511 KeV y utilizando cristales de Nal (Te). El metodo se utilizo tambien aplicando tecnicas de haces pulsantes. En la experiencia realizada se obtuvo, a partir de una radiofrecuencia pulsadora, una sucesion de impulsos muy aguzados, con una frecuencia de 8 MHz, que se transmitio a las placas de la valvula E80T. Se obtuvo un tiempo de resolucion de 2{tau} = 1,1 {center_dot} 10{sup -9} s con neutrones de 4 MeV, utilizando cristales plasticos de 0,7 pulgadas de largo. Normalmente la region de respuesta lineal fue de 30 ns (30 {center_dot} 10{sup -9} s), pero se consiguio aumentarla hasta 120 ns. (author) [Russian] Opisyvaetsya ehlektronnyj vremya-amplitudnyj preobrazovatel' impul'sov s ispol'zovaniem metoda umnozheniya perekryvayushchikhsya impul'sov vmesto obychnogo metoda ikh slozheniya. EHto dostigaetsya polucheniem sovpadeniya linejnogo piloobraznogo impul'sa s rezko ogranichennym igol'chatym impul'som. Piloobraznyj impul's postupaet na reshetku otklonyayushchej puchok lampy (E80T), a igol'chatyj impul's napravlyaetsya na otklonyayushchie plastiny, gde on otkryvaet lampu tol'ko v techenie promezhutka vremeni priblizitel'no 5 x 10{sup -9} sekund. Plastina poluchaet zaryad, proportsional'nyj raznitse vo vremeni mezhdu nachalom piloobraznogo i nachalom igol'chatogo impul'sov. Posylaemyj plastinoj impul's rasshiryaetsya i usilivaetsya i amplituda ego sootvetstvuet velichine raznitsy vo vremeni. EHtim metodom udalos' poluchit' razreshayushchuyu sposobnost' po vremeni, ravnuyu {tau} = 7 x 10{sup -12} sekundam s iskusstvennymi impul'sami, {tau} = 3 x 10{sup -10} sekundam s sovpadeniyami dlya kobal'ta-60 pri ispol'zovanii plasticheskogo kristalla NE 102, i {tau} = 1,4 x 10{sup -9} sekundy pri sovpadeniyakh v 511 kehv pri ispol'zovanii kristallov Nal (Te). EHtot metod byl ispol'zovan takzhe v sochetanii

  7. Determination of {sup 210}Pb and other radionuclides; Determinacion de {sup 210}Pb y otros radionuclidos

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Orellana, Jordi [Universitat Autonoma de Barcelona (Spain)

    2012-07-01

    smaller masses. Though analytical techniques exist for determining {sup 210}Pb with {beta} spectrometry with proportional counters or liquid scintillation counters its application to the study of sedimentary cores is rare. [Spanish] El {sup 210}Pb es un emisor {beta}-{gamma}, con dos emisiones {beta} de energias E{sub 1max} = 63.1 keV y E{sub 2max} = 16.6 keV y una emision {gamma} de 46.5 keV. El hecho de ser doble emisor permite su determinacion directa mediante diferentes tecnicas, aunque tambien podemos determinar su actividad de forma indirecta mediante su descendiente el {sup 210}Po. La tecnica mas comun y que recomendamos para la determinacion del {sup 210}Pb en sedimentos costeros es la medida de {sup 210}Po por espectrometria {alpha}. En este tipo de registros podemos asumir que el {sup 210}Pb y su descendiente el {sup 210}Po se encuentran en equilibrio secular, aunque existe la posibilidad que en la parte superior del core esto no se cumpla siempre. Las ventajas de esta tecnica son que i) el procesamiento radioquimico de las muestras no es complicado, ii) los espectrometros {alpha} permiten un recuento rapido para obtener una estadistica aceptable (<10%) y iii) la cantidad de muestra que se requiere es pequena (de 0.2 a 1 g). La facilidad del tratamiento de las muestras y la sencillez del tratamiento espectral permite realizar perfiles exploratorios de los cores para determinar la calidad del perfil sedimentario antes del inicio de otros analisis. La medida directa del {sup 210}Pb mediante espectrometria {gamma} con detectores de Ge de alta resolucion es tambien muy comun. Las ventajas de esta tecnica son que: - se trata de una tecnica no destructiva y por tanto permite la reutilizacion de las muestras para otros analisis; - la preparacion de las geometrias de medida es sencilla y no necesita de procesos radioquimicos; - permite medir simultaneamente otros radionuclidos {gamma} de interes ({sup 137}Cs, {sup 241}Am, {sup 226}Ra, {sup 40}K y {sup 234}Th). Asimismo

  8. Communication techniques and nuclear energy; Tecnicas de comunicacion y energia nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Carpintero Santamaria, N.

    2005-07-01

    The paper presents some thoughts on several factors related to nuclear energy and the way they are presented by the mass media, usually provoking controversy to the Spanish society and thus, undermining public acceptance. Some possibilities for boosting nuclear energy among public opinion are suggested, emphasizing the fact that nuclear power is essential because it is both ecologically and economically sound. (Author)

  9. Inversion gravimetrica 3D por tecnicas de evolucion: Aplicacion a la Isla de Fuerteventura

    Science.gov (United States)

    Gonzalez Montesinos, Fuensanta

    The rampant success of quantum theory is the result of applications of the 'new' quantum mechanics of Schrodinger and Heisenberg (1926-7), the Feynman-Schwinger-Tomonaga Quantum Electro-dynamics (1946-51), the electro-weak theory of Salaam, Weinberg, and Glashow (1967-9), and Quantum Chromodynamics (1973-); in fact, this success of 'the' quantum theory has depended on a continuous stream of brilliant and quite disparate mathematical formulations. In this carefully concealed ferment there lie plenty of unresolved difficulties, simply because in churning out fabulously accurate calculational tools there has been no sensible explanation of all that is going on. It is even argued that such an understanding is nothing to do with physics. A long-standing and famous illustration of this is the paradoxical thought-experiment of Einstein, Podolsky and Rosen (1935). Fundamental to all quantum theories, and also their paradoxes, is the location of sub-microscopic objects; or, rather, that the specification of such a location is fraught with mathematical inconsistency. This project encompasses a detailed, critical survey of the tangled history of Position within quantum theories. The first step is to show that, contrary to appearances, canonical quantum mechanics has only a vague notion of locality. After analysing a number of previous attempts at a 'relativistic quantum mechanics', two lines of thought are considered in detail. The first is the work of Wan and students, which is shown to be no real improvement on the iisu.al 'nonrelativistic' theory. The second is based on an idea of Dirac's - using backwards-in-time light-cones as the hypersurface in space-time. There remain considerable difficulties in the way of producing a consistent scheme here. To keep things nicely stirred up, the author then proposes his own approach - an adaptation of Feynman's QED propagators. This new approach is distinguished from Feynman's since the propagator or Green's function is not obtained by Feynman's rule. The type of equation solved is also different: instead of an initial-value problem, a solution that obeys a time-symmetric causality criterion is found for an inhomogeneous partial differential equation with homogeneous boundary conditions. To make the consideration of locality more precise, some results of Fourier transform theory are presented in a form that is directly applicable. Somewhat away from the main thrust of the thesis, there is also an attempt to explain, the manner in which quantum effects disappear as the number of particles increases in such things as experimental realisations of the EPR and de Broglie thought experiments.

  10. APLICACION DE TECNICAS DE INGENIERIA METABOLICA AL MEJORAMIENTO DE LA PRODUCCION DE TREHALOSA POR CORYNEBACTERIUM GLUTAMICUM.

    OpenAIRE

    PADILLA IGLESIAS, LEANDRO MAURICIO

    2004-01-01

    La Trehalosa es un disacárido con tremendas aplicaciones en la industria biotecnológica y alimenticia. Este compuesto se encuentra en muchos organismos, a causa de su capacidad de proteger las células contra el calor y la deshidratación. Un ejemplo, es la bacteria Gram-positiva Corynebacterium glutamicum, la cual sintetiza trehalosa a través de dos rutas principales, TreYZ y OtsBA, usando ADP-glucosa (especulativamente) y UDP-glucosa, respectivamente, como dadores de unidades de ...

  11. Individualization of radiographic techniques in computerized radiology; Individualizacao das tecnicas radiograficas em radiologia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Abrantes, M.E.S.; Oliveira, A.H. de, E-mail: marcosabrantes2003@yahoo.com.br [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Feliz, W.F.; Stoppa, L.G.; Paiva, O.A. [Universidade Federal de Minas Gerais (UFADTI/UFMG), Belo Horizonte, MG (Brazil). Hospital das Clinicas. Unidade Funcional Apoio Diagnostico e Terapeutica por Imagem; Oliveira, G.A.P. [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Anatomia e Imagem

    2015-07-01

    This work aims to produce information for image quality implementation in a radiology sector based on previous assessments of the images by questionnaires, acceptance and quality, as step of recognition of the parameters used in radiographic techniques. After this research data raised were divided into male group, female, PA and PF thickness, body mass index, type of biotypes, anthropomorphic parameters, body evaluation associated with the constant tension and additional filtration. The results show the predominance of the 35 and 40 constant with additional filtering from 0.5 to 1.5 mmAl, voltage for male gender (PA PF) 86-92 kV and 96-112 kV voltage for female gender of 85-98 kV and 96-112 kV, respectively. The load applied to the tube for males (PA and PF) is between 5-10 and 5-16 mA.s mA.s and for females (PA and PF) is between 6.3 to 8 mA.s and 9-14 mA.s.

  12. Terza partita. La musica nell’età della tecnica – un madrigale

    OpenAIRE

    Nicola Buso

    2011-01-01

    in the electroacoustic music field the writing grow weak; the action, the listening, the body memory come out; the writing become theatrical action in the collaborative live coding praxis over network: the technological action reveal itself like the root of language, of thought, of culture, like the essence of man, where history accomplish.

  13. Terza partita. La musica nell’età della tecnica – un madrigale

    Directory of Open Access Journals (Sweden)

    Nicola Buso

    2011-07-01

    Full Text Available in the electroacoustic music field the writing grow weak; the action, the listening, the body memory come out; the writing become theatrical action in the collaborative live coding praxis over network: the technological action reveal itself like the root of language, of thought, of culture, like the essence of man, where history accomplish.

  14. Tecnicas de fisioterapia respiratoria: efeito nos parametros cardiorrespiratorios e na dor do neonato estavel em UTIN

    Directory of Open Access Journals (Sweden)

    Renata Martins

    2013-12-01

    Full Text Available OBJETIVOS: verificar os efeitos de técnicas de fisioterapia respiratória (TFR na dor e na função cardiorrespiratória de recém-nascidos (RN clinicamente estáveis com prescrição de TFR, internados em unidade de terapia intensiva neonatal. MÉTODOS: ensaio clínico randomizado cego. Os RN foram alocados em três grupos: G1-controle; G2- fisioterapia convencional; G3-reequilíbrio tóracoabdominal. Neonatos do G2 e G3 receberam intervenção em atendimento único. Todos foram avaliados antes, imediatamente após e 15 minutos após o término da intervenção/repouso quanto aos parâmetros cardiorrespiratórios (saturação periférica de oxigênio/SpO2, frequências cardíaca/fc e respiratória/fr e dor (escalas específicas: NIPS, NFCS e PIPP. Para análise dos dados foram aplicados: testes qui-quadrado, Friedman, Kruskal- Wallis e, posteriormente, análise de comparações múltiplas, com p0,05 e em relação à dor houve mudanças significativas nas escalas NIPS (G1 e G2, p=0,037 e p=0,011, respectivamente e PIPP (G2, p=0,005. CONCLUSÕES: técnicas de fisioterapia respiratória não desencadearam dor, nem instabilidade cardiorrespiratória nos RN estudados.

  15. Soluciones administrativas y tecnicas para proteger los recursos computacionales de personal interno-insiders

    Directory of Open Access Journals (Sweden)

    Perez, M. T.

    2007-07-01

    Full Text Available Nowadays the organizations know that the computational security in logical, physical, environment security of hardware, software, process of business, data bases, telecommunications, butt in other, are essential not solely for the continuity of the daily operations of the businesses, but also to obtain strategic advantages. If the organization does not worry to place policies of computational security, that does not have control computational security, that does not invest in protection tools, does not update itself in the new problems of internal attacks and that a culture in computational security does not foment, among other aspects, more likely this in a high risk of which some computational resource can be affected by internal personnel and in consequence part or all the Business can let operate. It is necessary to remember that the internal personnel of the areas of information technology or systems intentional business or not intentionally they can damage the computational resources since they have knowledge of the vulnerabilities that have the computational resources. I am made east summary with the purpose of which the people who read it have. This paper has the aim to create a TI Resources Security Culture and to present some administrative and technical elements to protect the computational resources of from internalinsiders personnel.

  16. Measurement of void fractions by nuclear techniques; Medicion de fracciones de vacio por tecnicas nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez G, A.; Vazquez G, J.; Diaz H, C.; Salinas R, G.A. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    In this work it is done a general analysis of those techniques used to determine void fractions and it is chosen a nuclear technique to be used in the heat transfer circuit of the Physics Department of the Basic Sciences Management. The used methods for the determination of void fractions are: radioactive absorption, acoustic techniques, average velocity measurement, electromagnetic flow measurement, optical methods, oscillating absorption, nuclear magnetic resonance, relation between pressure and flow oscillation, infrared absorption methods, sound neutron analysis. For the case of this work it will be treated about the radioactive absorption method which is based in the gamma rays absorption. (Author)

  17. Tecnica Smed. Reducción del tiempo de preparación

    Directory of Open Access Journals (Sweden)

    Francisco Espin Carbonell

    2013-05-01

    Full Text Available Markets have evolved to require companies producing more product variety, smaller orders, reduced lead times and highly competitive production costs.SMED technique, designed by Shigeo Shingo in the 50s, is offered as an alternative to address this challenge of contemporary production.This technique provides a series of steps, in which carefully study the operations that take place during the batch process of change, making possible a radical reduction of preparation time.The result of the application of SMED is a flexible plant, able to meet the demand from current customers.

  18. Tecnica e riproducibilità: gli esiti della metafisica occidentale e la nuova dimensione estetica

    Directory of Open Access Journals (Sweden)

    Antonio Martino

    2015-03-01

    Full Text Available AbstractNihilism coincides with the accomplishment of metaphysics which, in turn, culminates in the triumph of the scientific rationality. The essence of metaphysics, in its last accomplishment (nihilism, consists of the oblivion of being, while the essence of nihilism represents the awareness of that oblivious accomplishment. The shadow of the Being (Seiende covers the Being (Sein while the real facts lead the scientific-experimental thought determining, from Galileo on, the supremacy of the experimentally reproducible objectivity as well as of the scientific method on the actually productive subjectivity. The result is the so-called «technological planetary orientation»: lost the sense of the metaphysic question, philosophy comes to the end. In other words, after Nietzsche there is only science/technique. Therefore, how has all that weighed on the aesthetic dimension? The artistic productivity, though reflecting the torment of the human soul, towards the nothing of sensemiraculously tends to make the light of the Being (Sein appear from the shadow of the material Being (Seiende. Every originating artistic shine of the Being (Seinis an aesthetic expression from the pure creative human act which celebrates its own being as a dynamic bond of connections (inter-essewould say evocatively Kierkegaard-Climacus that cannot understand the origin but spread its form. Der Nihilismus entspricht der Erfüllung der Metaphysik, die wiederum im Triumph der wissenschaftlichen Rationalität. Das Wesen der Metaphysik, in seiner extremen Erfüllung (Nihilismus, besteht aus dem Vergessen des Seins und das Wesen des Nihilismus ist das Bewusstsein solcher vergessender Erfüllung. Der Schatten des Seiendes verdeckt das Sein und die Elemente der realen Welt (die Tatsachenlenken das wissenschaftliche, experimentelle Denken, das seit Galileo, die Hegemonieder experimentell reproduzierbaren Objektivität, und der wissenschaftlichen Methode über die effektive Subjektivität auslöst. Das Ergebnis ist die sogenannte „technologische/planetarische Ordnung“: geht der Sinn der metaphysischen Frage verloren, kommt die Philosophie zu einem Ende. Mit anderen Worten, nach Nietzsche gibt es nur Wissenschaft/Technik. Nun, wie hat all dies die ästhetische Dimension beeinflusst? Obwohl die künstlerische Produktivität das Leiden der menschlichen Seele angesichts des Nichts des Sinns wiederspiegelt, so neigt sie doch dazu, das Licht des Seins (wie durch ein Wunder aus dem Schatten des materiellen Seiende sichtbar werden zu lassen. Die Quelleeines jeden künstlerischen Schaffens des Wesens ist die ästhetische Manifestation des reinen kreativen Akt des Menschen, der  das eigeneSein als dynamischen Kern von Beziehungen zelebriert (inter-esse würde Kierkegaard-Climacus sagen der nicht im Stande ist, den Ursprung zu erfassen, sondern nur dessen Formen verbreiten.

  19. Improving the procedure for obtaining organophilic clays; Aperfeicoamento da tecnica de obtencao de argilas organofilicas

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, S.S.; Carvalho, L.H. de; Silva, S.M.L., E-mail: suedina@dema.ufcg.edu.b [Universidade Federal de Campina Grande (UAEMa/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Raposo, C.M.O. [Universidade Federal de Campina Grande (UAMG/UFCG), PB (Brazil). Unidade Academica de Mineracao e Geologia

    2009-07-01

    This study was realized in order to improve the way to obtain organoclays using clay from clay a local industry. Thus, factors not yet well understood in regard to organoclays were optimized and elucidated in this work. In the preparation of organoclays, a sodium bentonite, from the Bentonit Uniao Nordeste-Campina Grande/PB, was purified and organically modified with quaternary ammonium salt, cetyl trimethyl ammonium bromide (Cetrimide), using different conditions of preparation (time of mixing and content of organic surfactant). For purposes of comparison it was used also a commercial sodium montmorillonite (Cloisite Na{sup +}), supplied by Southern Clay Products. Infrared spectroscopy (FTIR) and X ray diffraction (XRD) data indicated that organoclays more thermally stable and with better cost/benefit ratio can be prepared using the lowest mixing time (30 min) and the lowest amount of surfactant (equivalent to 100% of CEC of clay). (author)

  20. Analysis of archaeological pieces with nuclear techniques; Analisis de piezas arqueologicas con tecnicas nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Tenorio, D [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    In this work nuclear techniques such as Neutron Activation Analysis, PIXE, X-ray fluorescence analysis, Metallography, Uranium series, Rutherford Backscattering for using in analysis of archaeological specimens and materials are described. Also some published works and thesis about analysis of different Mexican and Meso american archaeological sites are referred. (Author)

  1. Eficiencia tecnica y estacionalidad en los procesos de tratamiento de aguas residuales

    Directory of Open Access Journals (Sweden)

    Ramon Sala-Garrido

    2008-01-01

    Full Text Available El análisis de la eficiencia técnica en las plantas de tratamiento de aguas residuales esun fenómeno de creciente actualidad. Son muchas las razones que justifican la necesidad deconocer en detalle las posibles ineficiencias existentes en los procesos de tratamiento. El uso demodelos DEA (Data Envelopment Analysis en este campo ofrece grandes posibilidades conrespecto a la identificación y el conocimiento detallado de los factores que determinan laeficiencia de una planta. La obtención de indicadores de eficiencia asociados a cada uno de losinputs utilizados en el proceso resulta de gran utilidad. Una de las variables que influye en elcomportamiento eficiente de los procesos de tratamiento es la estacionalidad en los flujos.Aunque resulta difícil la cuantificación de esta influencia, en este trabajo se presenta unametodología que permite abordar los efectos de la estacionalidad a través de un análisis detolerancias asociado a los índices de eficiencia técnica. Se lleva a cabo una aplicación empíricapara una muestra de plantas de tratamiento existentes en la Comunidad Valenciana.

  2. The hydrogen resource. Productive, technical and economic analysis; La risorsa idrogeno: analisi produttiva tecnica ed economica

    Energy Technology Data Exchange (ETDEWEB)

    De Fronzo, G. [Lecce Univ., Lecce (Italy). Dipt. di Scienze Economiche, Matematico-Statistiche, Economici-Aziendali

    2000-02-01

    Diffusion of hydrogen as an energetic vector meets with a lot of obstacles that don't depend on available raw material, but on hydrogen combination with other elements. It is necessary, therefore, to separate hydrogen picking out the available different technologies to have different pure hydrogen of variable quantities. Besides, its diffusion as fuel is limited because of the great production cost compared to fuels sprung from petroleum. Hydrogen used on a large scale could have advantages on the environment and occupation, but there are economic and politic obstacles to limit its diffusion. Future of economic system, based on hydrogen as the main energetic vector, will depend on the programme that national and international qualified governing bodies will be able to do. [Italian] L'articolo analizza l'uso dell'idrogeno come risorsa dal punto di vista tecnico ed economico. Si discute la relazione con i programmi che governi nazionali sapranno mettere in campo per il suo sfruttamento.

  3. Description Fuel Cycle Spanish. Technical Visits; Descripcion del Ciclo de Combustible Espanol. VisitasTecnicas

    Energy Technology Data Exchange (ETDEWEB)

    Ochoa Valero, R.; Vinuesa Carretero, A.

    2014-07-01

    The nuclear fuel cycle includes all processes and operations from the mining of uranium to the management of radioactive waste generated. These processes include the manufacture of nuclear fuel, the operation of the plants and the storage of radioactive waste in the corresponding temporary stores. (Author)

  4. Introduction to Pre-clinical Imaging Techniques; Introduccion a las tecnicas de imagen preclinica

    Energy Technology Data Exchange (ETDEWEB)

    Mulero, F.

    2008-07-01

    Biomedical research poses increasingly complex problems regarding the biochemical processes that take place in living organisms. Just as in clinical research, medical imaging techniques are an excellent tool to study these processes. One of the most outstanding techniques is what is called molecular imaging, the best tool for which is positron emission tomography (PET). PET is capable of monitoring those processes in vivo at a molecular level and it can be used in multiple applications, including the development of new drugs, the study of human disease models in animals, and the characterization of gene expression and phenotype changes caused by genetic manipulation (transgenic and knockout animals). (Author) 5 refs.

  5. Implementation of an analytical technique for Samarium; Implementacion de una tecnica analitica para Samario

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico)

    2004-07-01

    Since the Samarium presents the same chemical properties that the plutonium, it has been used as homologous in studies that allow us to know the behavior that the plutonium presents in solution, with the advantage of working with an inactive and not very dangerous element. At the moment studies of sorption of plutonium or samarium are made on some mineral matrices that present certain surface properties. Due to the low concentrations that are used in the studies of sorption of samarium on those reagent substrates, their detection becomes very difficult for the conventional analysis media. The luminescence is a technique that can detect lower concentrations, smaller at 1 X 10{sup -} {sup 2} M, but when fluorofors are used this limit of detection increases in several orders of magnitude. In this work it has been used the arsenazo-III as fluorofor agent since it reacts in a specific way with the samarium, forming a complex that presents a proportional luminescence to the concentration of the present samarium. The advantage of making the quantification of samarium by luminescence is that it can use the same instrumental equipment to determine the speciation of the samarium sipped in the zircon. (Author)

  6. Generalizzazione cartografica tra ricerca e applicazione La Cartografia Tecnica Regionale delle Marche

    Directory of Open Access Journals (Sweden)

    Stefano Bellesi

    2007-03-01

    Full Text Available Il problema della generalizzazione cartografica è uno dei temi principe nel dibattito cartografico tra gli addetti ai lavori. La cartografia multiscala rappresenta infatti una delle chimere dell’era digitale e, man mano che i DB cartografici si sono popolati di informazioni, ha dimostrato la sua realtà. L’orientamento è quello di automatizzare al massimo tutte le procedure prendendo in considerazione quelle che sono le esigenze della rappresentazione.

  7. Terminologia tecnica e riappropriazione concettuale: le polifonie medievali come laboratorio compositivo

    Directory of Open Access Journals (Sweden)

    Carlo Serra

    2011-01-01

    Simha Arom’s Studies in African Polyphony had a great impact in Western Culture, especially inside the Rhythmic Theory of Composition: the main aim of this work is a discussion about the  relationships between the occurrences  of  ancient terms connected to music theory and the strength possibility of description  in modern music contexts. How can we use concepts like Talea, Color, Organum in the description of rhythmical structures conceived outside the western canonical  theory? The Arom’s writings show us that today is still possible to establish a link between African models of Rhythmical periods and the Western Concept of temporal dissonance: but what is the role of perception inside this description?

  8. Nova tecnica de estimacao de fasores na presenca de decaimento DC exponencial em sistemas de potencia

    NARCIS (Netherlands)

    Vianello, R.; Silva, L.R.M.; Duque, C.A.; Serqueira, A.S.; Ribeiro, M.V.; Silveira, P.M.; Ribeiro, P.F.

    2009-01-01

    O presente trabalho apresenta uma nova metodologia de estimação de fasores na presença de decaimento DC exponencial e de harmônicos ímpares no sinal. As estimações são realizadas em meio ciclo mais três amostras da componente fundamental do sistema. O método é baseado na estimação dos parâmetros do

  9. L’homo errans nell’era dell’infallibilità tecnica

    Directory of Open Access Journals (Sweden)

    Fabrizio Bracco

    2017-04-01

    Full Text Available In this paper the phenomenon of human error will be described in relationship to human performance in complex high-technology systems. Misconceptions could lie behind the terms “human error” at several levels: cognitive, emotional, moral, and cultural. From the cognitive perspective, human error has been widely investigated and proper theoretical models can accurately describe its nature and functions. From the emotional perspective, making a mistake could lead to feelings such as guilt and shame, which could have relevant effects on how people cope with the situation and try to remedy the error. Concerning the moral perspective on human error, we describe a dangerous mix of cognitive biases and the judgment of the person. The cognitive biases frame the mistake as something that was predictable and avoidable, and the severity of the blame is correlated with the gravity of the outcomes. These distortions critically move the perspective from an analysis of behavior to moral judgment of the person, a typical effect of the so called “blame culture”. Finally, from the cultural perspective, human behavior is superficially compared to the reliability of technology. Blaming humans for not being like machines is just a symptom of current technology-centered culture. Given the complexity of today’s socio-technical systems, the challenge is to harmonize human and automation characteristics. The goal is not to make humans less prone to errors, but to make complex systems safer.

  10. Aseptic techniques(practical guide no.3); Practico no.3-Tecnicas asepticas

    Energy Technology Data Exchange (ETDEWEB)

    Nappa, Andres; Souto Pais, Beatriz [Centro de Investigaciones Nucleares, Montevideo (Uruguay)

    1994-12-31

    Definition of aseptic techniques in relation with the labor of Radiopharmacy.Control of environment and working areas.Control of materials entered into an aseptic area: water, nitrogen,vials,stoppers,needles and syringes. Personnel and manipulations control,choosing of materials,precautions in the aseptic manipulation and sterility preservation during usage life. Bacteriological membrane filtration in sterilized conditions. Work in a laminar flow unit. Protocol of Practical task 3. Bibliography

  11. MODELO DE CONTEXTO PARA ENTORNOS INTELIGENTES DE APRENDIZAJE SOPORTADOS EN LAS TECNICAS DE LA CONSCIENCIA CONTEXTUAL

    Directory of Open Access Journals (Sweden)

    Jorge Gomez

    2015-01-01

    Full Text Available El propósito de este trabajo de investigación es plantear un modelo teórico para el diseño de sistemas que entreguen contenidos de aprendizaje soportadas en el contexto. Este modelo permite dividir el contexto en cuatro tipos de sub-contexto, cada uno con un rol especifico como son el computacional, del entorno, de los recursos de aprendizaje y del estudiante. Al final del estudio se plantea un caso de estudio en donde se describe una actividad de aprendizaje soportada en el contexto

  12. Tecnicas avanzadas de medida en intensimetria acustica para la caracterizacion de materiales aislantes

    Science.gov (United States)

    Munuera Saura, Gregorio

    The measurement rate of acoustic reduction (R) in an insulating material is determined in special designed enclosures according to UNE EN ISO 140-1 standard. The construction of a testing room that complies with the standards requires a significant financial investment, that too often can not be provided by general machinery manufacturers. The outdoor machines have to be designed considering the noise emission limits established in the European Directive 2000/14, making the installment of insulating materials in enclosures of machines necessary. Suppliers of insulating materials for industrial use does not normally provide the insulating properties of their products, which are often obtained from rock wool, polyethylene, polyurethane, synthetic rubber, etc. It is difficult to test these materials that are characterized by low density surface in a room standardized test procedure that is based on the measurement of sound pressure. The main problem is getting the validation of the measurement when the rate of acoustic reduction is relatively low, as in the case of materials mentioned above. An alternative procedure is proposed in this Doctoral Thesis based on the measurement of sound intensity. The vector nature of this parameter allows just the flow of energy through a given surface to be measured. The validation of the measurement is achieved with the highest degree of accuracy by applying the criteria included in the standard UNE EN ISO 9614. A steel plate 6 mm thick incorporated with a sound source for amplification of a pink noise signal is designed for carrying out the tests. Faced with the source is placed a piece of material to test. The source is connected and the transmitted sound intensity is measured with a probe consisting of two microphones located opposite one another. Previously it has been determined the flow of acoustic energy that impinges on the piece. The difference between the two measures provides directly the rate of acoustic reduction. The main advantage of the described test procedure is that it can be done in a room with normal dimensions and without specific conditioning. The vibroacoustic behaviour of the testing box and its influence on the measures is another important aspect to be considered. A test of modal analysis has been carried out with a steel plate similar to the enclosures of the box. A mathematical model based on the Statistical Energy Analysis SEA has been developed to estimate the paths of energy transmission from the sound source to the point of measurement with the sound intensity probe. The commercial software AUTOSEA2 LT is used. General conclusions regarding the alternative method of measurement and specific ones related to the capacity of insulation of the tested materials have been obtained. As for the general conclusions, the limitations of measuring with the intensity probe at low and high frequencies have been proved, validating measurements with an accuracy of 0.5 dB according to the criteria set forth in the standard UNE EN ISO 9614 Part 3 have been obtained, and a new test procedure for easy determination of the rate of acoustic reduction of an insulating material with low density surface has been established. Finally, the devised procedure allows future developments in the field of vibroacoustics, such as the application of the principle of reciprocity and the determination of acoustic impedance of materials by application of techniques for measuring of acoustics intensity.

  13. Nuevas tecnicas basadas en redes neuronales para el diseno de filtros de microondas multicapa apantallados

    Science.gov (United States)

    Pascual Garcia, Juan

    In this PhD thesis one method of shielded multilayer circuit neural network based analysis has been developed. One of the most successful analysis procedures of these kind of structures is the Integral Equation technique (IE) solved by the Method of Moments (MoM). In order to solve the IE, in the version which uses the media relevant potentials, it is necessary to have a formulation of the Green's functions associated to the mentioned potentials. The main computational burden in the IE resolution lies on the numerical evaluation of the Green's functions. In this work, the circuit analysis has been drastically accelerated thanks to the approximation of the Green's functions by means of neural networks. Once trained, the neural networks substitute the Green's functions in the IE. Two different types of neural networks have been used: the Radial basis function neural networks (RBFNN) and the Chebyshev neural networks. Thanks mainly to two distinct operations the correct approximation of the Green's functions has been possible. On the one hand, a very effective input space division has been developed. On the other hand, the elimination of the singularity makes feasible the approximation of slow variation functions. Two different singularity elimination strategies have been developed. The first one is based on the multiplication by the source-observation points distance (rho). The second one outperforms the first one. It consists of the extraction of two layers of spatial images from the whole summation of images. With regard to the Chebyshev neural networks, the OLS training algorithm has been applied in a novel fashion. This method allows the optimum design in this kind of neural networks. In this way, the performance of these neural networks outperforms greatly the RBFNNs one. In both networks, the time gain reached makes the neural method profitable. The time invested in the input space division and in the neural training is negligible with only few circuit analysis. To show, in a practical way, the ability of the neural based analysis method, two new design procedures have been developed. The first method uses the Genetic Algorithms to optimize an initial filter which does not fulfill the established specifications. A new fitness function, specially well suited to design filters, has been defined in order to assure the correct convergence of the optimization process. This new function measures the fulfillment of the specifications and it also prevents the appearance of the premature convergence problem. The second method is found on the approximation, by means of neural networks, of the relations between the electrical parameters, which defined the circuit response, and the physical dimensions that synthesize the aforementioned parameters. The neural networks trained with these data can be used in the design of many circuits in a given structure. Both methods had been show their ability in the design of practical filters.

  14. Tecnicas de etiquetado de senales opticas en redes de conmutacion de rafagas

    NARCIS (Netherlands)

    Vegas Olmos, J.J.; Tafur Monroy, I.; Koonen, A.M.J.

    2003-01-01

    En este artículo presentamos una revision de los asuntos mas importantes relacionados con las redes de conmutacion de ráfagas de señales ópticas etiquetadas (LOBS – Labeled optical burst switched) y las En este artículo presentamos una revision de los asuntos mas importantes relacionados con las

  15. Contribuciones tecnicas para la medida de la contaminacion electromagnetica de microondas. Estudio en diversas poblaciones

    Science.gov (United States)

    Segura Garcia, Jaume

    La contaminacion ambiental por campos electromagneticos ha resultado ser en estos ultimos anos uno de los problemas mas acuciantes del panorama tecnologico y de salud publica. En el primero de los casos porque las inversiones realizadas son enormes y en el segundo porque cada vez es mayor el numero de articulos, "technical reports" e informes medicos que afirman la existencia de una cierta causalidad, aunque sea debil, entre los campos electromagneticos y ciertos cuadros sintomatologicos. En nuestro caso, hemos dedicado bastantes esfuerzos a investigar el llamado "sindrome de radiofrecuencia / microondas", denominado asi en la literatura cientifica por presentarse en operarios de estaciones de radar y en trabajadores de potentes emisoras de radio y television. En esta memoria presentamos un resumen del trabajo realizado durante los ultimos anos en la medida de la contaminacion electromagnetica ambiental asociado a las comunicaciones inalambricas. En ella se recogen los fundamentos fisicos y propiedades de las ondas electromagneticas, la tecnologia empleada en los sistemas de telefonia celular y los antecedentes relativos a la investigacion de la interaccion de las ondas electromagneticas con organismos vivos. Se desarrolla un procedimiento de medida que ha conducido a la elaboracion de los primeros "mapas de radiofrecuencia" similares, en el aspecto descriptivo, a los mapas de ruido desarrollados en el area de la contaminacion acustica. Por ultimo, se analiza la respuesta subjetiva de los residentes, personas que viven en el entorno de cobertura de las estaciones base de telefonia movil y que se ven sometidos a determinados niveles de radiacion electromagnetica, con el fin de situar este fenomeno al nivel que le corresponde en el ambito de la respuesta subjetiva ciudadana.

  16. Mouldroom techniques for teletherapy; Tecnicas de cuarto de moldes para teleterapia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-04-14

    Mould room techniques are necessary to get the best from teletherapy treatment. They are directed at: Ensuring that the part of the patient being treated remains in the same position from start to end of a fraction of radiotherapy. Ensuring that the fields, as originally imaged and planned, can be accurately reproduced for each fraction. Ensuring that, if more than one planned volume is treated, these volumes maintain a constant, reproducible relationship to each other. Deriving contours for planning teletherapy. Facilitating accuracy of setting up individual fields with respect to position on the patient and treatment unit. Fabricating and mounting blocks or shields within any field that will adequately and reproducibly shield healthy tissue or sensitive organs. Fabricating and mounting compensators and bolus material within any field that will adequately and reproducibly modify the beam as required. Immobilisation is approached initially by assessing an anatomical region, the disease and the favoured treatment machine. The versatility of each technique to accomplish immobilisation for various purposes is addressed. Immobilisation is most commonly used in the head and neck region for the treatment of cancers of the oral and nasal passages and the treatment of brain tumours. As this part of the anatomy is very flexible, the immobilisation device must not only ensure that the head is kept in a symmetrical position, but also that the degree of flexion or extension of the neck (needed for treating a pituitary as opposed to a larynx) is maintained. Sensitive structures in that region are predominantly the eyes and spinal cord but on occasions a parotid salivary gland or part of the brain may require limitation of the dose. This may be achieved by planning the teletherapy beams with shielding blocks within selected fields.

  17. La interpretacion consecutiva: metodologia y tecnicas (Consecutive Interpretation: Methodology and Techniques).

    Science.gov (United States)

    Drallny, Ines

    1987-01-01

    Describes the purpose and appropriate methodology for various levels of interpreter training, for both consecutive and simultaneous interpretation. The importance of relating the intent of the text to the explicit language forms through which that intent is realized is discussed, and appropriate criteria for evaluation of student interpreters are…

  18. Whole-body irradiation technique: physical aspects; Tecnica de irradiacion corporal total: aspectos fisicos

    Energy Technology Data Exchange (ETDEWEB)

    Venencia, D.; Bustos, S.; Zunino, S. [Instituto Privado de Radioterapia. Obispo Oro 425. Cordoba 5000 (Argentina)

    1998-12-31

    The objective of this work has been to implement a Total body irradiation technique that fulfill the following conditions: simplicity, repeatability, fast and comfortable positioning for the patient, homogeneity of the dose between 10-15 %, short times of treatments and In vivo dosimetric verifications. (Author)

  19. MICROINJERTO IN VITRO COMO UNA TECNICA DE REVIGORIZACION DE ARBOLES ELITES DE PINUS RADIATA D. DON.

    OpenAIRE

    MATERAN OVIEDO, MARIA ELENA; MATERAN OVIEDO, MARIA ELENA

    2008-01-01

    Es bien conocido, que los ciclos de vida de muchas especies perennes comprenden dos fases en las que determinadas características morfológicas y fisiológicas son bastante distintas. Después de la germinación, la mayoría de las plántulas anuales y perennes 106p.

  20. Protection provided by masks sinkers in interventional techniques; Proteccion ofrecida por mascaras plomadas en tecnicas intervencionistas

    Energy Technology Data Exchange (ETDEWEB)

    Pera Cegarra, O.; Alejo Luque, L.; Pifarre Martinez, J.

    2011-07-01

    The high doses that are taught in laboratories worked indispensable the use of shields and armor. In this context, the use of sinkers glasses is widespread, but not the sinkers of the masks. Our goal is to study the effectiveness of such masks for later comparison with that provided by leaded glasses with side shields. Specifically, compare the reduction in lens dose rate for different positions and orientations of the head of specialist intervention.

  1. Shielding calculations using computer techniques; Calculo de blindajes mediante tecnicas de computacion

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Portilla, M. I.; Marquez, J.

    2011-07-01

    Radiological protection aims to limit the ionizing radiation received by people and equipment, which in numerous occasions requires of protection shields. Although, for certain configurations, there are analytical formulas, to characterize these shields, the design setup may be very intensive in numerical calculations, therefore the most efficient from to design the shields is by means of computer programs to calculate dose and dose rates. In the present article we review the codes most frequently used to perform these calculations, and the techniques used by such codes. (Author) 13 refs.

  2. Technical competence in cardiovascular magnetic resonance and computed tomography; Competencia tecnica em ressonancia e tomografia cardiovascular

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Juliano Lara; Shiozaki, Afonso Akio; Azevedo Filho, Clerio Francisco de; Rochitte, Carlos Eduardo; Pinto, Ibraim Marciarelli Francisco; Lopes, Marly Maria Uellendahl; Schvartzman, Paulo Roberto, E-mail: jlaraf@fcm.unicamp.br [Universidade de Campinas (UNICAMP/GERT) SP (Brazil). Grupo de Estudo em Ressonancia e Tomografia Cardiovascular

    2009-10-15

    Cardiovascular magnetic resonance and computed tomography have evolved as very practical and useful techniques applied in clinical cardiology. Due to their rapid acceptance in the cardiology community and widespread use, training of both cardiologists and radiologists on this subspecialty has not been homogeneous so far. This in part explains significant differences observed in the diverse background found in today’s practicing physicians who execute these exams. In order to guide training facilities as well as both payers, contractors and general cardiologists ordering the exam, this document provides a minimum standard that should be accomplished by all physicians who pursue education in the field and for those who already practice in it. The clinical competences listed in this statement are by no means thorough but should be required by all those involved in cardiovascular magnetic resonance and computed tomography as the customary requirements for current and future practitioners. (author)

  3. Improved Techniques for Low-Flux Measurement of Prompt Neutron Lifetime, Conversion Ratio and Fast Spectra; Methodes Perfectionnees de Mesure de la Duree de Vie des Neutrons Instantanes, du Rapport de Conversion et des Spectres de Neutrons Rapides, dans un Reacteur a Bas Flux; Usovershenstvovannye metody izmereniya vremeni zhizni mgnovennykh nejtronov, koehffitsienta konversii i spektra bystrykh nejtronov pri slabykh potokakh nejtronov; Tecnicas Perfeccionadas para la Determinacion del Periodo de los Neutrones Inmediatos, la Razon de Conversion y los Espectros de Neutrones Rapidos, con Flujos Reducidos

    Energy Technology Data Exchange (ETDEWEB)

    Armani, R. J.; Bennett, E. F.; Brenner, M. W.; Bretscher, M. M.; Cohn, C. E.; Huber, R. J.; Kaufmann, S. G.; Redman, W. C. [Argonne National Laboratory, Argonne, IL (United States)

    1964-02-15

    a mi- hauteur 1,5%), pour la somme des impulsions dans l'irradiation par les neutrons thermiques. (author) [Spanish] En el programa del reactor ZPR, se han aplicado varios metodos estadfsticos para determinar la razon perfodo de los neutrones inmediatos/perfodo de la fraccion de neutrones retardados. Los autores idearon uno de los metodos, consistente en el analisis del ruido del reactor con un filtro de paso de banda, y perfeccionaron otros, taies como la medicion de la frecuencia de coincidencias retardadas entre los impulsos del contador en funcion del retardo, y la determinacion de la variancia relativa de las integrales de tiempo del flu jo neutronico en funcion del tiempo de integracion. Han estudiado en que terrenos se aplican mas ventajosamente los distintos metodos. Tambien han procurado interpretar los resultados de las mediciones precitadas y han comprobado que la interpretacion basada en un modelo cinetico simple puede aplicarse a numerosos casos practicos. Los autores describen varios perfeccionamientos introducidos en su metodo original de activacion para la determinacion de la razon produccion/destruccion de material fisionable, con flujos reducidos. Entre ellos figuran la aplicacion de tecnicas radioqufmicas de alta sensibilidad como procedimiento de confirmacion; la correccion de impulsos parasitos, mediante laminas de diferente grado de enriquecimiento, para determinar la contribucion de la fision del material fertii a la actividad de los productos de fision, asi como Iaminas expuestas a los diferentes espectros para medir los impulsos relacionados con los sucesos de fision en la determinacion de la captura; y en el empleo del recuento por coincidencias para la deteccion de la desintegracion del {sup 239}Np. Para deducir la razon de conversion partiendo de los datos relativos a la activacion, es preciso conocer el coeficiente {alpha}, es decir, la razon capturas/fisiones en el combustible. Por ahora no existe ninguen metodo experimental que permita

  4. Statistical Review of surface dose in the period 1995-2010, measured by different types of TLD dosimeters; Revision estadistica de las dosis superficiales, en el periodo 1995-2010, medidas mediante distintos tipos de dosimetros TLD

    Energy Technology Data Exchange (ETDEWEB)

    Pastor Antolin, S.; Munoz Blasco, J.; Llansana Arnalot, J.; Gultresa Colomer, J.

    2011-07-01

    We analyzed the evolution of the number of special controls over the period 1985 to 2010 and the evolution of the doses in the period 1995 to 2010. Comparing the standard dose extremities respect to whole body in cases where users use both types of control in the same installation.

  5. Statistical modeling to management and treatment of scrap with low and very low residual activity; Hacia la modelizacion estadistica de la gestion y tratamiento de chatarras con baja y muy bajo actividad residual

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Bermejo Fernandez, R.; Anaya Lazaro, M.

    2011-07-01

    The experience of recent years on the management of scrap metal containing residual activity have allowed the development of a simple statistical model for the management of these materials. This statistical model includes a breakdown of the various processing operations to which these materials undergo and the effects in the process of radiological controls associated to the control of declassification that defines disposal (recycled by smelting, reclamation, temporary storage the plant or sent to final storage of radioactive waste).

  6. Asociacion Espanola de la Industria Electrica (UNESA) annual report 2006. Information about electricity activities; Asociacion Espanola de la Industria Electrica UNESA 2006 memoria estadistica. Informe sobre las actividades electricas

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The annual report of UNESA, the industrial grouping of major power companies in Spain, gives statistical data relating to power generation, transmission and distribution and a summary of achievements during 2006. Power is generated from fossil fuel, nuclear, and hydro power. Cooperation of UNESA with international organizations is reported. Detailed figures are given for electricity production during the year. A summary of the report is available in English and Spanish on the website www.unesa.es.

  7. Mas allá de la estadistica alimentaria y nutricional: percepciones de un aguaruna con relación a la situación alimentaria de su pueblo

    Directory of Open Access Journals (Sweden)

    Lucio Huamán-Espino

    2006-01-01

    Full Text Available Los Aguaruna son uno de los pueblos indígenas amazónicos más numerosos,hace tres décadas fueron descritos como un pueblo saludable debido a su adecuada nutrición;sin embargo,estudios recientes demuestran que esto ya no es así.Buscando una explicación diferente a lo que proporcionan las estadísticas,se realizó un enfoque cualitativo del problema,a través de una historia oral con un técnico sanitario aguaruna,que relata como la intervención de la "civilización " a influido en ellos.Son un pueblo dedicado a la caza,pesca y recolección,que ahora al reunirse en co - munidades y adoptar algunas costumbres foráneas sin conciencia de conservación,han sobreexplotado su entorno, disminuyendo su fuente de proteínas obtenidas a través de la caza y pesca.Existe un temor a realizar nuevas activi- dades (agricultura,ganadería y la crianza de animalesque implican nuevas formas de trabajo y no han formado parte de su quehacer histórico.

  8. Statistics of fermions in the Randall-Wilkins model for kinetics of general order; Estadistica de fermiones en el modelo de Randall-Wilkins para cinetica de orden general

    Energy Technology Data Exchange (ETDEWEB)

    Nieto H, B; Azorin N, J; Vazquez C, G A [UAM-I, 09340 Mexico D.F. (Mexico)

    2004-07-01

    As a theoretical planning of the thermoluminescence phenomena (Tl), we study the behavior of the systems formed by fermions, which are related with this phenomenon establishing a generalization of the Randall-Wilkins model, as for first order kinetics as for general order (equation of May and Partridge) in which we consider a of Fermi-Dirac statistics. As consequence of this study a new variable is manifested: the chemical potential, also we establish its relationship with some of the other magnitudes already known in Tl. (Author)

  9. Colombia: Issues for Congress

    Science.gov (United States)

    2010-04-23

    slightly higher figure of 389,967 displaced persons for 2008. See http://www.accionsocial.gov.co/ Estadisticas /publicacion%20junio%20de%202009.htm...persons for 2008. See: http://www.accionsocial.gov.co/ Estadisticas /publicacion%20junio%20de%202009.htm. 69 CODHES bases its estimates on fieldwork, and

  10. Approved Methods and Algorithms for DoD Risk-Based Explosives Siting

    Science.gov (United States)

    2009-07-21

    development and life expectancy.” http://www.statistik-bund.de/basis/e July 1998 (22 December 1998) 9 Instituto Nacional de Estadistica . “Number of deaths...bund.de/basis/e July 1998 (22 December 1998). 9 Instituto Nacional de Estadistica . “Number of deaths by major causes of death.” http://www.ine.es/htdocs

  11. Characterization of pre-hispanic pigments by modern analytical techniques; Caracterizacion de pigmentos prehispanicos por tecnicas analiticas modernas

    Energy Technology Data Exchange (ETDEWEB)

    Ortega A, M

    2003-07-01

    In this work, the study of mural painting pigments from two archaeological sites (The Great Temple in Mexico city and Cacaxtla) was performed to know their materials composition, identify their structural characteristics and properties by using modern analytical techniques. Blue, ochre, red and black pigments of Mexica culture (1325-1521 a.C. / late Post Classic period); blue, ochre, red, brown, pink, green and white of Olmeca- Xicalanca culture (700-900 a.C. / Epiclassic period) were studied. Data about materials used, technological evolution, mineralogical background, cultural interchange and origin was obtained. Environmental exposition of these paintings since their discovering has produced changes and damage on their materials. Therefore, stability of some pigments has been notorious, ''Maya Blue'' specially presents extraordinary resistance to diluted and concentrated acids and alkalis including boiling condition, acqua regia, solvents, oxidant and reducing agents, moderate heat and biocorrosi6n; for that reason its study was emphasized. ''Maya Blue'' pigment was synthesized in laboratory using the processes described by historic sources (with indigophera suffruticosa leaves and synthetic indigo) up to obtain a stable pigment including acqua regia action. Clay matrix sorbs nearly 0.4 weight percent of organic dye, which cover 79% of palygorskita surface area. (Author)

  12. Irradiation techniques for the breast cancer treatment; Tecnicas de irradiacion para el tratamiento de cancer de mama

    Energy Technology Data Exchange (ETDEWEB)

    Varon T, C F; Rojas C, E L [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)

    2007-07-01

    The radiotherapy is a cancer treatment way based on the radiation employment. It acts on the tumor, destroying the wicked cells and impeding that this it grows and reproduce. With the radiotherapy the probability of cure of some types of cancer; among them the one of breast, it increases. The investigations in oncology have allowed to develop new technologies with which is possible, for example, to locate the tumors accurately and to adapt the irradiation fields to their form. This has allowed to improve the treatments since it can destroy the tumor applying an intense radiation dose without producing irreversible damages to other organs and healthy tissues of the body. In the underdeveloped countries or in development as Mexico, and almost all those of Latin America, it is not still possible to have several of these technologies in the main oncological centers of the country by their high cost. It is expected that their cost go lowering and that its going to develop technologies more cheap so that they can be applied in more general way to the population that suffers of this suffering. (Author)

  13. Tabu search, a versatile technique for the functions optimization; Busqueda Tabu, una tecnica versatil para la optimizacion de funciones

    Energy Technology Data Exchange (ETDEWEB)

    Castillo M, J.A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    The basic elements of the Tabu search technique are presented, putting emphasis in the qualities that it has in comparison with the traditional methods of optimization known as in descending pass. Later on some modifications are sketched that have been implemented in the technique along the time, so that this it is but robust. Finally they are given to know some areas where this technique has been applied, obtaining successful results. (Author)

  14. Planning the expansion of distribution: technical and regulatory considerations; Planejamento da expansao da distribuicao: consideracoes tecnicas e regulatorias

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Afonso Henriques Moreira; Haddad, Jamil; Cruz, Ricardo Alexandre Passos da [Universidade Federal de Itajuba (EXCEN/UNIFEI), MG (Brazil). Centro de Excelencia em Eficiencia Energetica, Recursos Naturais e Energia

    2008-07-01

    The article presents the basis for the new planning of power distribution highlighting the beginning of the public hearing process for the creation of PRODIST: Procedures for Distribution of Electric Power by the ANEEL - National Agency of Electrical Energy.

  15. X-diffraction technique applied for nano system metrology; Tecnica de difracao de raios X aplicada na metrologia de nanossistemas

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, Alexei Yu.; Machado, Rogerio; Robertis, Eveline de; Campos, Andrea P.C.; Archanjo, Braulio S.; Gomes, Lincoln S.; Achete, Carlos A., E-mail: okuznetsov@inmetro.gov.b [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (DIMAT/INMETRO), Duque de Caxias, RJ (Brazil). Div. de Metrologia de Materiais

    2009-07-01

    The application of nano materials are fast growing in all industrial sectors, with a strong necessity in nano metrology and normalizing in the nano material area. The great potential of the X-ray diffraction technique in this field is illustrated at the example of metals, metal oxides and pharmaceuticals

  16. Nuclear techniques in the prospecting and exploitation of petroleum; Tecnicas nucleares en la prospeccion y explotacion de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Balcazar, M.; Lopez, A.; Castellanos, J.P. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: mbg@nuclear.inin.mx

    2003-07-01

    The apatite is a mineral that is found in the perforation nucleus of petroleum exploration whose natural content of Uranium is of around 10 ppm. This uranium is spontaneously fissioned producing fission traces whose number it is proportional to the age of the apatite and whose longitudes remained stable to temperatures smaller than 60 C, they decreased partially in the temperature range of 60 to 120 C and they faded totally if the nucleus of perforation was to temperatures bigger than 120 C. This agreement in the call 'thermal formation window' of the petroleum among 60 and 120 C and the partial erased of the longitudes of fission traces in the apatite, it allows to use this to determine not only the age of the petroleum field, but also their geologic thermal history (paleo temperature), it also allows to model the formation of the petroleum field and to contribute to outline to PEMEX on exploitation and exploration strategies. In this work it is presented: the visualization of the fission traces in the apatite of Cerro de Mercado, Durango, considered as an international standard of dating; the basic principles of this nuclear technique that allow to determine the age of the apatite; the formation of horizontal fission traces inside the apatite, by irradiation with fission fragments; and as the analysis of the thermal instability of the lengths of the fission traces it provides information of the paleo temperature of the petroleum basin. (Author)

  17. Technique of treatment of prostatic cancer with scarcity means; Tecnica del tratamiento del cancer de prostata con escasez de medios

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez M, S.; Carrera M, F.; Gomez- Millan B, J.; Gutierrez B, L.; Bayo L, E. [Hospital Juan Ramon Jimenez. Ronda Norte s/n. Huelva (Spain)

    1998-12-31

    To show the particularities in the treatment simulation-localization, in the volume delimitation and in the main planning strategies motive by our scarcity means during the first year of performance (absence of physical simulator, planning system 2D). It was utilized a computerized tomograph, an X-ray equipment with tele commanded table and another with ceiling telescopic suspension. Also it was utilized a radio opaque lattice of marked center and knowing space and also a magnetic pointer for indicating 80 cm length between focus-skin. In the CT it was took spaced cuts starting from the central, at coincident distances with lattice lines, contouring the clinical target volume (CTV), what subsequently it was removed to the simulation plate. The volume to be irradiated, or PTV (planning target volume), it was determined adding a margin to CTV. The irradiation to itself it was realized with a minimum of 3 fields in the first phase. From 16 patients evaluated, the 100 % normalize the PSA ciphers at 6 months. 25 % patients, rectal-intestinal toxicity grade 1 and 18.7 % grade 2. Acute vesicle toxicity grade 1 in a 31.2 % patients, grade 2 in 12.5 % and grade 3 in 6.5 %. A 25 % patients presented dermatitis grade 1 and 18 % grade 2 and grade 3. Under no case it was necessary the treatment interruption for the toxicity normalization. Maximum local control with absence of chronic toxicity. The low toxicity presented could must be to the utilization of conformations in the lateral plates. According to our experience, we believe that it is not necessary to renounce at this type of treatments if it is lacking of high energies, such as succeed in some installations if it is utilized 3 or more fields in the first phase and individualized conformations. (Author)

  18. Study of a new glass matrix by the thermoluminescence technique; Estudo de uma nova matriz vitrea pela tecnica de termoluminescencia

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Pamela Z.; Vedovato, Uly P.; Cunha, Diego M. da; Dantas, Noelio O.; Silva, Anielle C.A.; Neves, Lucio P.; Perini, Ana P., E-mail: anapaula.perini@ufu.br [Universidade Federal de Uberlandia (INFIS/UFU), MG (Brazil). Instituto de Fisica; Caldas, Linda V.E. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Carrera, Betzabel N.S.; Watanabe, Shigueo [Universidade de Sao Paulo (IF/USP), Sao Paulo, SP (Brazil). Instituto de Fisica

    2015-07-01

    The thermoluminescence technique is widely used for both personal and for high-dose dosimetry. In this work, the thermoluminescence technique was utilized to study a new glass matrix, with nominal composition of 20Li{sub 2}CO{sub 3}.10Al{sub 2}O{sub 3}.20BaO.50B{sub 2}O{sub 3} (mol%), irradiated with different doses in a {sup 60}Co source. The glow curves and the dose-response curve were obtained for radiation doses between 50 Gy and 900 Gy. The results showed that this new glass matrix presents potential use in high-dose dosimetry. (author)

  19. Plutonium determination in urine by techniques of mass spectrometry; Determinacion de plutonio en orina por tecnicas de espectrometria de masas

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez M, H. [ININ, Departamento de Quimica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Yllera de Ll, A., E-mail: hector.hernandez520@gmail.com [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, Departamento de Medio Ambiente, Av. Complutense 22, 28040 Madrid (Spain)

    2013-10-15

    The objective of this study was to develop an analytic method for quantification and plutonium reappraisal in plane tables of alpha spectrometry be means of the mass spectrometry technique of high resolution with plasma source inductively coupled and desolvator Aridus (Aridus-Hr-Icp-Ms) and mass spectrometry with accelerator (AMS). The obtained results were, the recovery percentage of Pu in the plane table was of ∼ 90% and activity minimum detectable obtained with Aridus-Hr-Icp-Ms and AMS was of ∼ 3 and ∼ 0.4 f g of {sup 239}Pu, respectively. Conclusion, the results demonstrate the aptitude of the Aridus-Hr-Icp-Ms and AMS techniques in the Pu reappraisal in plane tables with bigger speed and precision, improving the values notably of the activity minimum detectable that can be obtained with the alpha spectrometry (∼ 50 f g of {sup 239}Pu). (author)

  20. Trayectoria socio-tecnica de las relaciones entre extractivismo y desarrollo sostenible: El caso de la Colosa en Colombia

    OpenAIRE

    Andrade Sastoque, Ernesto; Jiménez Becerra, Javier A.

    2016-01-01

    La minería a gran escala denominada sostenible es hoy una de las caras más visibles de lo que algunos autores denominan la reinvención del desarrollo y su promesa de progreso para el caso Latinoamericano. Si bien en la región este tipo de proyectos se critican sistemáticamente por sus consecuencias ambientales, culturales y geopolíticas, nos enfrentamos actualmente ante un fenómeno en el que el desarrollo no muere, sino que se está reinventando en discursos, prácticas y artefactos denominados...

  1. Material irradiation techniques used in corrosion and wear analysis; Irradiacion de materiales, tecnicas de estudios de corrosion y desgaste

    Energy Technology Data Exchange (ETDEWEB)

    Tenreiro, Claudio [Chile Univ., Santiago (Chile). Facultad de Ciencias. Dept. de Fisica

    1997-12-31

    Full text: Nuclear physics methods, applied to material analysis are discussed and some application examples are given. Experiments have been performed to study corrosion du to the presence of humidity and sulfur compounds. The use of resonant reactors allows the determination of depth profiles of H and S from structures located in particularly contaminated areas. The method provides a non destructive and quick way of estimating the effect of such elements in different types of structures, such as the ones used in high voltage transmission lines. Also the wear out rates in mechanical engine components having a difficult direct access, have been evaluated by proton activation analysis. The evaluation of the advantages of this method is being done. The effect of irradiation damage on superconducting high temperature ceramics was analyzed by the interaction of energetic alpha particles with high T{sub c} YBaCuO samples.

  2. Technical and economic feasibility of distributed generation of electricity; Viabilidade tecnica e economica de geracao distribuida de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Rabelo, Frederico Augusto Ornelas; Espirito Santo, Marcos Vinicius do; Leite, Leonardo Henrique de Melo; Silva, Arlete Vieira da [Centro Universitario de Belo Horizonte (UnBH), MG (Brazil)], e-mails: fred.aor@hotmail.com, marcos_ves@yahoo.com.br, leonardo.leite@prof.unibh.br, arlete.silva@prof.unibh.br

    2011-07-01

    This article focuses on the technical and economic feasibility of the design and implementation of energy micro nets distributed generation (GD). For this, a study was conducted in a rural area to assess the potential of generating electricity from renewable sources, and this has assisted the Brazilian network of conventional energy. We studied the renewable energy village, considered the conventional system of generation, transmission, distribution of electricity in this region and the technical and economic feasibility of implementing distributed generation and its interconnection to the basic network or not. The methodological procedures were used bibliographic and documentary research, interviews with standardized forms, and Case Study. This study was conducted in Minas Gerais assessing the current conditions of the electrification of the area surveyed and deployment of the types of electricity sources - biomass (biogas and burning eucalyptus), wind, solar photovoltaic. The calculations were made from it with companies and budgets. It is conceived, then, models of generating electricity through renewable sources constitutes a GD. Finally, they estimated the costs of implementation of the models studied in the community where they were cost estimates for electric power production through private investment, considering some possible scenarios to be created, namely: generation for own consumption, generation the sale of surplus and possible expansions. In this way demonstrated the high value of the investments required for the use of renewable sources in electricity generation small, given the current scenario. (author)

  3. Project clean city: joint trenching for urban facilities; Projeto cidade limpa: vala tecnica para instalacoes urbanas - sistema infavias

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Aloisio Pereira da [Companhia de Gas de Santa Catarina (SCGAS), Florianopolis, SC (Brazil)

    2012-07-01

    This study aims to propose a join trench for urban facilities, using concepts related to planning and urban cadastre, sustainability of resource use, and mainly focus on safety during construction, operation and maintenance. The model proposes the replacement of individual construction of facilities of natural gas, potable water, telephone, data transmission and electricity (low and medium voltage) by a system that encompasses all of these facilities in a trench, the deployment may also occur in the same period or if necessary, or at different times, creating flexibility in the system. The security of facilities due to the operational interface between the concessionaires and clients will be ensured by the protected by reinforced concrete structure, designed using the concept of 'fail-safing', derived from the Toyota Production System. The joint trench model was designed from the perspective of sustainability and technological innovation for your future use of the new design of power supply, through the concept of 'Smart Grid' with the use of bidirectional power system transmission and distribution, in decentralized model for generating electricity through cogeneration systems with natural gas. (author)

  4. Application of gamma irradiation technique for the preservation of propolis; Aplicacao da tecnica de irradiacao gama para preservacao de propolis

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Andrea Harumi

    2002-07-01

    Irradiation has been recognized as an efficient method for the reduction of deteriorating and pathogenic microorganisms in foods. Propolis is a resinous product made by bees from material processed by the bee's own metabolism and resins from plants. The aim of this work was the application of gamma irradiation technique for the preservation of propolis, because of its efficiency in the reduction of the microbial load. The changes on the total flavonoids content, phenolic compounds and other characteristics required for the qualification and characterization of Brazilian propolis were also analysed. Propolis samples from Juiz de Fora region, Minas Gerais, were irradiated in a {sup 60}Co source, with doses from 0 to 10kGy for the microbiological analyses and 5.0, 7.0 and 10.0kGy for the physico-chemical analyses. The physico-chemical that have been made were: determination of total flavonoids content, semi-quantitative determination of phenolic compounds (artepelin-C, kempferol, chrysin, galangin and quercetin), dry matter analysis, humidity, ash content, mechanical mass and waxes. The ionizing radiation has shown to be efficient in the reduction of the microbial load. Total coliforms determination showed a great reduction with the dose of 3kGy and concerning mesophile aerobic bacteria a systematic reduction was observed, achieving values <10 UFC/g for the dose of 10kGy; similar results was obtained for molds and yeasts. Salmonella assays were negative for all samples. There was no significant alteration on total flavonoids contents nor on the composition of phenolic compounds as a consequence of radiation application at the assayed conditions. The complementary analyses of dry matter and humidity contents, ashes, mechanical mass and waxes did not shown changes after irradiation even with the maximum dose of 10kGy, remaining the results within the standards required by the Brazilian legislation. (author)

  5. Anastomose mecanica em reto extraperitoneal : (duas tecnicas de reconstrução) : estudo experimental comparativo em caes

    OpenAIRE

    Fernando Cordeiro

    1995-01-01

    Resumo: Os problemas resultantes das anastomoses no reto abaixo da reflexão peritoneal continuam sendo tema de discussões. Com o desenvolvimento de novas técnicas pode-se estender a ressecção anterior aos segmentos retais mais baixos com preservação do mecanismo esfincteriano, porém a segurança destes procedimentos está por ser estabelecida. Este estudo comparativo randomizado entre duas técnicas de anastomose mecânica no reto de cães, abaixo da reflexão peritoneal, permitiu a elaboração de...

  6. Deteccion de citomegalovirus mediante la tecnica de inmunoperoxidasa y aislamiento viral Cytomegalovirus detection by Immunoperoxidase assay and viral isolation

    Directory of Open Access Journals (Sweden)

    Maritza Alvarez

    1991-06-01

    Full Text Available En el presente estudio se comparó la técnica de inmunoperoxidasa para la detección de citomegalovirus (IPCMV utilizando anticuerpos monoclonales que reconocen proteínas precoces virales con el método convencional de aislamiento viral en fibroblastos humanos. Un total de 150 muestras de orina fueron examinadas encontrando una sensibilidad de un 89.8% y una especificidad de 91.3% de la técnica de IPCMV comparada con el aislamiento viral. Una de las ventajas que presentó la IPCMV fue la rapidez con que fueron obtenidos los resultados (48 horas mientras que el aislamiento viral fue como promedio 14 días.An Immunoperoxidase assay was applied to detect early antigens of Cytomegalovirus (CMV in 150 urine samples from immunocompromised patients, using the commercial available monoclonal antibody against CMV El3. The detection of early antigen by IP (IPCMV is compared to the conventional cell culture isolation regarding specificity and sensitivity in order to evaluate is usefulness in the diagnostic of CMV infections. The IPCMV showed a sensitivity of 89.8% and a specificity of 91.3% when compared to the isolation method. The great advantage of the IPCMV is based on the shorter time results are achieved, since 48-72 Hs can be enough to provide evidence of CMV infection, while in the isolation technique cytopatho-genic effect was present around 14 days after sample inoculation.

  7. L’alienazione della donna tra esibizione e occultamento del corpo: dall’oscenità alla costruzione tecnica

    Directory of Open Access Journals (Sweden)

    Ines Testoni

    2013-06-01

    Full Text Available L’articolo discute della contrapposizione tra la modalità italiana di considerare il corpo della donna, quale mero oggetto di desiderio sessuale, attraverso la sua esibizione e ildenudamento mediatici versus quella musulmana che, invece, lo nasconde sotto khimar,jilbab o burqa. L'analisi fa perno sui diritti umani fondamentali che nel loro percorsostorico, promuovono il primato dell’individuo e della sua autodeterminazione, per arri-vare a considerare i concetti di alienazione e di oscenità e verificare come le due posi-zioni siano in continuità. Si discute, quindi, delle possibili cause che, anche nell’attualesocietà occidentale, potrebbero ripristinare forme di tradizionalismo, a partire dalla stessa volontà delle donne.

  8. Dosimetric comparison of 3 technical of planning dosimetric breast; Comparacion dosimetrica de 3 tecnicas de planificacion dosimetrica de mama

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz de Zarate Vivanco, R.; Perez Azorin, J. F.; Martinez Indar, L.; Ruiz Saiz, B.; Cacicedo Fernandez de Bobadill, J.; Trueba Garayo, I.; Gomez de Iturriaga Pina, A.; Lupiani Castellanos, J.

    2013-07-01

    With the ultimate goal of optimizing human and material resources, it was launched a comparative study of the three available techniques based on the statistical evaluation of the doses received by tumor volumes and organs of risk. (Author)

  9. Laser diagnodent: a comparative study with other diagnostic techniques; Laser diagnodent: estudo comparativo com outras tecnicas de diagnostico

    Energy Technology Data Exchange (ETDEWEB)

    Godinho, Reugma Rego

    2002-07-01

    An evaluation of the Diagnodent equipment (Kavo Company, Germany) for the occlusal caries detection was dane through the comparison with other conventional diagnostic techniques, such as visual inspection, intra-oral micro camera and digital X-ray. The effectiveness of the equipment in the detection of hidden caries and its viability as a diagnosis method for caries in their initial stage was also studied. Fifty eight permanent molars and premolars teeth from patients with age between 6 and 30 years were studied. The obtained results indicated that the conventional methods employed for the caries diagnosis are unable to detect the carious lesion in its initial stage. The Diagnodent equipment has this capability to detect caries presenting a flawless surface, specially the hidden caries, allowing the dentist to decide between a preventive ar a conservative procedure. The main advantage of the Diagnodent is to be an objective method, compared to the visual and radiographic ones, that are dependent on the professional interpretation. The Diagnodent is, therefore, a promising alternative as an objective and standardized diagnosis method for the final diagnostic. (author)

  10. NUEVO ESTUDIO SOBRE EL PERFIL DE LOS ALUMNOS DE PRIMER CURSO DE LA ESCUELA DE INGENIERIA TECNICA INDUSTRIAL

    Directory of Open Access Journals (Sweden)

    Angel Valea

    2014-01-01

    Full Text Available El trabajo estudia la valoración de las respuestas a un cuestionario respondido por los alumnos que cursan la asignatura de Quí mica del primer curso universitario , mater ia obligatoria de la Ingeniería Industrial, y que pertenecen a las especialidades de Mecánica y de Qu í mica Industrial. El cuestionario está configurado en base a 30 preguntas de selección múltiple, y que pertenecen a 4 áreas significativas (contenidos de l a asignatura, metodología, profesorado y alumnado. Con los resultados se ha realizado una agrupación seleccionando 12 bloques significativos sobre los que se aportan resultados estadísticos y/o interpretación de los resultados. Se pretende conocer desde l a perspectiva de los alumnos, las costumbres y las debilidades como estudiantes.

  11. Characterization dosimetry of applicators Valencia using different techniques; Caracterizacion dosimetrica de los aplicadores Valencia mediante diferentes tecnicas

    Energy Technology Data Exchange (ETDEWEB)

    Ferrer Garcia, C.; Huertas, C.; Huerga Cabrerizo, C.; Corredoira Silva, E.; Serrada Hierro, A.

    2013-07-01

    Valencia applicators, connected to a charging system deferred micro Selectron-HDR (Elekta-Nucletron), are used for treating small skin lesions, being an alternative to treatments with electron beams or orthovoltage equipment of X ray. These applicators are a modification of Leipzig applicators, consisting of a flatter filter, which flattens the dose distribution in the area of treatment [1,2]. In the present study are considered applicators with diameters of 2 and 3 cm (VH2 and ht5), with the parallel to the treatment area source. Due to the electronic pollution on the walls of the applicator, treatments are performed with a plastic cap. In this study are commissions Valencia applicators, checking the various options proposed in the literature. (Author)

  12. Technical relapsed testicular irradiation for acute lymphoblastic leukemia; Tecnica de irradiacion para testiculos en recidiva de leucemia linfoblastica aguda

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Miranda, S.; Delgado Gil, M. M.; Ortiz Siedel, M.; Munoz Carmona, D. M.; Gomez-Barcelona, J.

    2011-07-01

    Testicular irradiation in children suffering from acute lymphoblastic leukemia presents difficulties in relation to daily positioning, dosimetry for dose homogenization of complex geometry and volume change during irradiation thereof. This can lead to significant deviations from the prescribed doses. In addition, the usual techniques often associated with unnecessary irradiation of pelvic simphysis, anus and perineum. This, in the case of pediatric patients, is of great importance, since doses in the vicinity of 20 Gy are associated with a deviation of bone growth, low testosterone levels around 24 Gy and high rates of generation of second tumors. To overcome these problems we propose a special restraint in prone and non-coplanar irradiation.

  13. Application of geophysical methods in the indentification of landslides; Utilizacion de tecnicas geoficas en la identificacion de deslizamiento de ladera

    Energy Technology Data Exchange (ETDEWEB)

    Leon Gomez, A. M.; Tijera Carrion, A.; Ruiz Bravo, R.

    2014-07-01

    The aim of the current paper is to highlight which geophysical methods are the most widely used in the study of landslides nowadays. The investigation of landslides is one of the fundamental activities of Geotechnics. The development of that study can be carried out by applying geophysical methods of exploration. this article summarizes a state of the art previously done in a more extensive review of geophysical techniques which are used in the characterisation of landslides. Formerly, Jongmans and Garambois (2007) had reviewed applications of the main geophysical techniques to landslide characterisation. In their article, the authors compiled documentation that had been published after 1990 until 2006. Following on that paper, this study makes a review of several articles from 2007 until recent papers (2013), throughout a quantitative analysis of the most applied geophysical methods. the research carried out has allowed not only to point out the main geophysical techniques currently applied for landslides investigation, but also to establish which are the most suitable depending on their composition (soils or rocks). As an example of the analysis carried out from the different publication reviewed, and as a case of application of geophysical techniques to the study of landslides, the study developed by the Geotechnical Laboratory CEDEX on a Landslide is presented in this article. (Author)

  14. Characterization of pre-hispanic pigments by modern analytical techniques; Caracterizacion de pigmentos prehispanicos por tecnicas analiticas modernas

    Energy Technology Data Exchange (ETDEWEB)

    Ortega A, M

    2003-07-01

    In this work, the study of mural painting pigments from two archaeological sites (The Great Temple in Mexico city and Cacaxtla) was performed to know their materials composition, identify their structural characteristics and properties by using modern analytical techniques. Blue, ochre, red and black pigments of Mexica culture (1325-1521 a.C. / late Post Classic period); blue, ochre, red, brown, pink, green and white of Olmeca- Xicalanca culture (700-900 a.C. / Epiclassic period) were studied. Data about materials used, technological evolution, mineralogical background, cultural interchange and origin was obtained. Environmental exposition of these paintings since their discovering has produced changes and damage on their materials. Therefore, stability of some pigments has been notorious, ''Maya Blue'' specially presents extraordinary resistance to diluted and concentrated acids and alkalis including boiling condition, acqua regia, solvents, oxidant and reducing agents, moderate heat and biocorrosi6n; for that reason its study was emphasized. ''Maya Blue'' pigment was synthesized in laboratory using the processes described by historic sources (with indigophera suffruticosa leaves and synthetic indigo) up to obtain a stable pigment including acqua regia action. Clay matrix sorbs nearly 0.4 weight percent of organic dye, which cover 79% of palygorskita surface area. (Author)

  15. Technical and economic feasibility study of low flow compressors; Estudo de viabilidade tecnica e economica de compressores de baixa vazao

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Nagib F. da; Vieira, Francisco A. [Centro de Tecnologias do Gas (CTGAS), Natal, RN (Brazil); Campos, Michel F.; Moura, Newton R. de [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    One of the main problems for the installation of new natural gas stations has been the high investment for compressor acquisition. Out of 900 thousand Reais, which is an average value for the construction of a supplying structure, 600 thousand are destined for the acquisition of the compression system (average outflow of 800 Nm{sup 3}/hour at 20 deg C, 1 atm), approach commonly used in Brazil. To be economically feasible, it is necessary that the fueling station has a supplying volume of at least 600 vehicles/day. Niches of NGV market have been identified to new potentials, where the compressed gas demand is lower, therefore not justifying an investment in compression systems of high capacity. A solution for reduction of this investment would be the introduction in the Brazilian market of compression systems of medium and low outflow and with lower cost. In this context, CTGAS has a project into RedeGasEnergia in partnership with PETROBRAS, funded by FINEP/CTPETRO, to develop, to acquire, and to mount prototypes of compression systems of small and medium capacities. To attend the objectives of this project, a compressor was developed in a partnership with a national manufacturer, MOVITEC, and participation of CENPES, with an outflow of 200 Nm{sup 3}/hour (at 20 deg C 1 atm.), for a demand of up to 200 vehicles/day. Another alternative, for the case of small consumers with supplying demand of up to 15 vehicles/day is being made possible by the introduction in the Brazilian market of two compression systems of outflow with up to 13,0 Nm{sup 3}/h (at 20 deg C 1 atm). The installation of these systems will assist in the economical and technical feasibility studies. At this moment, there are some companies interested in knowing this new technology for using the compressor in their installations, thus demonstrating the success of this project, as well as the wakening of a new consuming market. (author)

  16. Optimization of the Starting by compressed air techniques; Optimizacion del Arranque en el sutiraje mediante tecnicas de aire comprimido

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    High-pressure compressed air shots have been begun to use for coal stop caving in horizontal sublevel caving workings, as alternative to explosives, since they do not condition the winning cycles and they produce a smaller deterioration in the vein walls. In spite of those advantages, different parameters influence on shot result is not known. For this reason, a research project has been carried out in order to improve the high-pressure compressed air technique to extend the system implementation and to reduce the winning costs in the sublevel caving workings. The research works have consisted of a numerical model development and reduced scale and real scale tests. The model describes fragile material fragmentation under dynamical loadings and it has been implemented in a code. The tests allow to study the different parameter influence and to validate the numerical model. The main research results are, on the one hand, a numerical model that allows to define the best shot plan for user's working conditions and, on the other hand, the great influence of the air volume on the disruptive strength has been proven. (Author)

  17. Utilizaçao de tecnicas fotometricas para estudo do branqueamento e da quantidade de algas simbiontes em colonias coralinas

    OpenAIRE

    Clauber Bonalume

    2006-01-01

    Resumo: Corais marinhos do mundo inteiro estão ameaçados pelas alterações climáticas que vêm acontecendo nas duas últimas décadas. O aquecimento da superfície terrestre associado à intensificação do fenômeno El Niño têm causado prejuízos à saúde dos corais marinhos com intensidade, extensão e escala temporal sem precedentes. Quando expostos a situações de estresse ambiental, corais podem sofrer branqueamento, perdendo suas algas simbiontes, as zooxantelas, e morrer se não as recuperarem. Dest...

  18. Trayectoria socio-tecnica de las relaciones entre extractivismo y desarrollo sostenible : El caso de la Colosa en Colombia

    NARCIS (Netherlands)

    Andrade Sastoque, Ernesto; Jiménez Becerra, Javier A.

    2016-01-01

    La minería a gran escala denominada sostenible es hoy una de las caras más visibles de lo que algunos autores denominan la reinvención del desarrollo y su promesa de progreso para el caso Latinoamericano. Si bien en la región este tipo de proyectos se critican sistemáticamente por sus consecuencias

  19. Introduction to materials science: Preparation and characterization techniques. Introduccion a la ciencia de los materiales: tecnicas de preparacion y caracterizacion

    Energy Technology Data Exchange (ETDEWEB)

    Albella, J.M.; Cintas, A.M.; Miranda, T.

    1993-01-01

    The materials science in this book is analyzed. Through 18 chapters the materials type, their structure, chemical reactions, mechanical properties are studied. Also optical properties of materials, magnetic properties, thin films, electronic microscopy and electric optic spectroscopy are analyzed.

  20. Camphor: a good model for illustrating NMR techniques; Canfora: um bom modelo para ilustrar tecnicas de RMN

    Energy Technology Data Exchange (ETDEWEB)

    Yoneda, Julliane Diniz; Leal, Katia Zaccur [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Dept. de Fisico-Quimica]. E-mail: kzl@rmn.uff.br; Seidl, Peter Rudolf [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica. Dept. de Processos Organicos; Azeredo, Rodrigo Bagueira de V. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Quimica. Dept. de Quimica Organica; Kleinpeter, Erich [Universitaet Potsdam (Germany). Chemisches Institut

    2007-07-01

    The use of Nuclear Magnetic Resonance spectroscopy to establish the three-dimensional structures of molecules is an important component of modern Chemistry courses. The combination of techniques that can be used for this purpose is conveniently illustrated by their application to the camphor molecule. This paper presents applications of several techniques used in NMR spectral interpretation in an increasing order of complexity. The result of individual experiments is illustrated in order to familiarize the user with the way connectivity through bonds and through space is established from 1D/2D-NMR spectra and molecular stereochemistry is determined from different NMR experiments. (author)

  1. Application of fractional control techniques in petrochemical process; Aplicacao de tecnicas de controle fracionario para processos petroquimicos

    Energy Technology Data Exchange (ETDEWEB)

    Isfer, Luis A.D.; Lenzi, Marcelo K. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil); Lenzi, Ervin K. [Universidade Estadual de Maringa (UEM), PR (Brazil)

    2008-07-01

    This work deals with the study of petrochemical process modeling and control using fractional differential equations. This kind of equation has been successfully used in modeling/identification, due to its powerful phenomenological description capability, generalizing conventional/classical models commonly used. Experimental data from literature were used for process identification and the mathematical model obtained, based on fractional differential equations, was the study of servo closed-loop control. Owing to its simplicity, the proportional type controller was used for this task, being able to control the process, keeping its stability, despite off-set. Different controller gains were used for simulation purposes, indicating that the higher the value of K{sub c}, the lower the off-set. (author)

  2. Evaluation of conformal radiotherapy techniques through physics and biologic criteria; Avaliacao de tecnicas radioterapicas conformacionais utilizando criterios fisicos e biologicos

    Energy Technology Data Exchange (ETDEWEB)

    Bloch, Jonatas Carrero

    2012-07-01

    In the fight against cancer, different irradiation techniques have been developed based on technological advances and aiming to optimize the elimination of tumor cells with the lowest damage to healthy tissues. The radiotherapy planning goal is to establish irradiation technical parameters in order to achieve the prescribed dose distribution over the treatment volumes. While dose prescription is based on radiosensitivity of the irradiated tissues, the physical calculations on treatment planning take into account dosimetric parameters related to the radiation beam and the physical characteristics of the irradiated tissues. To incorporate tissue's radiosensitivity into radiotherapy planning calculations can help particularize treatments and establish criteria to compare and elect radiation techniques, contributing to the tumor control and the success of the treatment. Accordingly, biological models of cellular response to radiation have to be well established. This work aimed to study the applicability of using biological models in radiotherapy planning calculations to aid evaluating radiotherapy techniques. Tumor control probability (TCP) was studied for two formulations of the linear-quadratic model, with and without repopulation, as a function of planning parameters, as dose per fraction, and of radiobiological parameters, as the α/β ratio. Besides, the usage of biological criteria to compare radiotherapy techniques was tested using a prostate planning simulated with Monte Carlo code PENELOPE. Afterwards, prostate planning for five patients from the Hospital das Clinicas da Faculdade de Medicina de Ribeirao Preto, USP, using three different techniques were compared using the tumor control probability. In that order, dose matrices from the XiO treatment planning system were converted to TCP distributions and TCP-volume histograms. The studies performed allow the conclusions that radiobiological parameters can significantly influence tumor control calculations and that the TCP-volume histograms can provide important information for treatment techniques evaluation. However, the establishment of quantitative comparison parameters using radiobiological criteria demands the establishment of prescription protocols based on these same parameters. Also, the literature recently showed large variations in radiobiological parameters, meaning that the inclusion of those in treatment planning calculations should require a careful endeavor. (author)

  3. Installation of a hydrokinetic turbines: technical and economic feasibility; Instalacao de turbinas hidrocineticas: viabilidade tecnica e economica

    Energy Technology Data Exchange (ETDEWEB)

    Els, Rudi Henri van; Vianna, Joao Nildo de Souza [Universidade de Brasilia (UnB), DF (Brazil). Centro de Desenvolvimento Sustentavel; Brasil Junior, Antonio Cesar Pinho [Universidade de Brasilia (UnB), DF (Brazil). Dept. de Engenharia Mecanica

    2008-07-01

    The generation of electric energy with hydrokinetic turbines is a technological option to attend households, communities and small villages in their basic electricity needs. These turbines, that generates power around 1 kW, appeared in the lasts decades as another technological alternative for decentralized electricity generation with diesel fuel generator sets. This article presents the various types of hydrokinetic turbines that exist and details the technical and economic feasibility of the second generation of hydrokinetic turbines designed by the University of Brasilia. The technical requirements on the selection of hydrokinetic sites, along with the diverse forms of fixing and mooring the turbine in the river are also showed. The economic feasibility of the use of this technology is presented along with the calculation of the generation costs accompanied with an assessment of the different items comprising this cost. At the end, this paper closes with a discussion on the management and operation of decentralized electric energy generation systems with renewable sources, showing that there is a need to design appropriate management mechanisms for this kind of situation, taking into account the specific aspects of its supply and principally of its use. (author)

  4. Determinação de amlodipina atraves da tecnica LC-MS-MS em estudo de bioequivalencia

    OpenAIRE

    Andreia Maria Lopes Guermani Orives

    2004-01-01

    Resumo: O objetivo deste estudo foi avaliar a bioequivalência de duas formulações de amlodipina em comprimidos ( Amlodipina® 5 mg comprimidos, Laboratório Teuto Brasileiro Ltda., formulação teste e Norvasc ® 5 mg, Laboratórios Pfizer Ltda., como referência ) após administração oral a 24 voluntários adultos sadios de ambos os sexos. O estudo foi aberto, randomizado com duas fases, onde os voluntários receberam uma dose única de besilato de amlodipina 5 mg. As amostras de plasma foram obtidas e...

  5. Project clean city: joint trenching for urban facilities; Projeto cidade limpa: vala tecnica para instalacoes urbanas - sistema infavias

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Aloisio Pereira da [Companhia de Gas de Santa Catarina (SCGAS), Florianopolis, SC (Brazil)

    2012-07-01

    This study aims to propose a join trench for urban facilities, using concepts related to planning and urban cadastre, sustainability of resource use, and mainly focus on safety during construction, operation and maintenance. The model proposes the replacement of individual construction of facilities of natural gas, potable water, telephone, data transmission and electricity (low and medium voltage) by a system that encompasses all of these facilities in a trench, the deployment may also occur in the same period or if necessary, or at different times, creating flexibility in the system. The security of facilities due to the operational interface between the concessionaires and clients will be ensured by the protected by reinforced concrete structure, designed using the concept of 'fail-safing', derived from the Toyota Production System. The joint trench model was designed from the perspective of sustainability and technological innovation for your future use of the new design of power supply, through the concept of 'Smart Grid' with the use of bidirectional power system transmission and distribution, in decentralized model for generating electricity through cogeneration systems with natural gas. (author)

  6. TEMBLORES Y OTRAS MANIFESTACIONES DE LA ENERGIA. LA TECNICA DEL SUDARSHAN KRIYA DE EL ARTE DE VIVIR

    Directory of Open Access Journals (Sweden)

    Ana D´Angelo

    2015-04-01

    Full Text Available Cada año miles de personas en el mundo se inician al neo-hinduismo en la versión que la Fundación El Arte de Vivir ofrece, particularmente a través de su “Seminario de Técnicas Respiratorias para el control del estrés y la ansiedad”. Durante los seis días que dura esta performance ritual, los participantes atraviesan toda una serie de preparativos -antes de sumergirse en la técnica respiratoria del Sudarshan kriya- a fin de producir transformaciones sobre su corporalidad y su subjetividad. Este artículo aborda los sentidos que los participantes otorgan al proceso de “desintoxicación” así estimulado, que derivaría incluso en una “purificación”. Desarrolla cómo los efectos somáticos de la técnica son traducidos en términos de ampliación de la “conciencia” y mayor atención intercorporal a la “energía” propia y ajena. Frío, temblor, llanto, dolor de cabeza y mareos constituyen algunas de las manifestaciones corporizadas más frecuentemente mencionadas. Como parte de un trabajo de campo más extenso en torno de los sentidos del bien-estar en el circuito de practicantes de yoga en una ciudad argentina de escala intermedia, el objetivo de este trabajo consistió en comprender fenómenos indeterminados propios de la experiencia humana –como los que el sudarshan kriya induce- recuperando su carácter intersubjetivo desde el paradigma del embodiment en antropología (más allá de un análisis del universo semiótico al que el ritual pertenece.

  7. Energy recovery storage systems in electrical vehicles with batteries; Tecnicas de armazenamiento de energia em veiculos electricos a baterias

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, M.; Maia, J.; Foito, D.

    2004-07-01

    In this paper are presented three energy recovery storage systems that can be used in electrical vehicles with batteries. The first storage system uses ultra capacitors that is electrical energy storage, the second system is based on superconductivity magnetic storage, and the third system uses on kinetic energy stored in flywheels. It is also presented the power electronics needed to perform the energy systems. (Author)

  8. Root activity evaluation in tree crops using isotopic techniques; Evaluacion de la actividad radicular de cultivos arboreos utilizando tecnicas isotopicas

    Energy Technology Data Exchange (ETDEWEB)

    Calvache, Marcelo [Comision Ecuatoriana de Energia Atomica, Quito (Ecuador)

    1992-12-31

    This paper discusses the methdology used to evalute root activity of the crops utilizing the technique of soil injection with solutions marked with isotopes. Some of the experimental data obtained with coffee, citrus and oil palm are also presented. Ovel all, these tree crops present a higher root activity in soil layers close to the surface (0-20 cm) and to a distance from the trunk which varies with age, season and variety. The most important conclusions are: 1. The isotope injection technique using {sup 3}2{sup P}, {sup 1}5{sup N}, or {sup 8}5{sup R}b, allow direct and reliable determination of root activity in these tree crops. 2. Root activity of three crops depends on age of the tree, variety, moisture content of the soil and soil type. 3. Soil moisture is the most influencial factor affecting root activity. This is turn depends on the irrigation method employed. 4. From the practical view point, the best distance from the trunk to apply fertilizer in the one wich has highest root activity closest to the soil surface.

  9. Statistical Control of Measurement Quality; Controle Statistique de la Qualite de la Mesure; Statisticheskim kontrol' kachestva izmerenij; Control Estadistico de la Calidad de las Mediciones

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, C. A. [Battelle Memorial Institute, Richland, WA (United States)

    1966-02-15

    sistemas de control dependen, sobremanera de la exactitud de los datos cuantitativos en que estan basados. La informacion sobre la seguridad de los metodos, de medicion empleados es esencial tanto para determinar las necesidades en lo que respecta a los datos como para evaluar los resultados obtenidos. Todos los metodos de analisis deben estar relativamente exentos de desviacion y ser reproducibles o, por decirlo de una manera mas corriente, precisos. Para evaluar y controlar la reproducibilidad de los resultados de los analisis se dispone de varias tecnicas estadisticas. Se han ideado procedimientos experimentales eficaces y economicos para descubrir el origen de los errores. Tambien se han ideado o adaptado procedimientos para mantener y controlar la exactitud de las mediciones corrientes. Todas esas tecnicas requieren la repeticion de algunas mediciones, pero la repeticion de todas ellas solo esta justificada cuando es de suma importancia detectar todos los errores serios. En las mediciones cabe considerar tres tipos de desviacion o inclinacion viciosa: 1) desviacion respecto de un patron aceptado, 2) desviacion respecto de experiencias anteriores y 3) desviacion respecto de un grupo. El primer tipo se refiere el grado en que los valores-obtenidos se separan sistematicamente de un patron que esta exento de desviaciones ya sea por definicion ya sea por haberse eliminado todas las causas de desviacion conocidas. El segundo tipo se refiere a la presencia de diferencias sistematicas despues de un determinado periodo de tiempo. El tercer tipo concierne a las relaciones entre distintas entidades fisicas en un momento determinado. En la memoria se analizan algunos procedimientos recientes de metodologia estadistica que pueden servir para evaluar esos tres tipos de desviacion. Se dan, ademas, algunos ejemplos del empleo de esas tecnicas estadisticas con datos obtenidos en Hanford. (author) [Russian] Jeffektivnyj kontrol' i uchet jadernyh materialov i, sledovatel

  10. Concepciones y concepciones alternativas de estudiantes universitarios/as de biologia y futuros maestros/as de Ciencia de escuela secundaria sobre la teoria de evolucion biologica por seleccion natural

    Science.gov (United States)

    Morales Ramos, Egda M.

    La teoria de evolucion biologica (TEB) por seleccion natural es uno de los conceptos unificadores mas importantes del curriculo de Biologia. En Puerto Rico se han hecho pocas investigaciones que abunden sobre las concepciones y concepciones alternativas (CA) que tienen los estudiantes universitarios/as de Biologia y los maestros/as de Ciencia del nivel secundario sobre esta teoria. La politica publica educativa actual establece mediante documentos normativos como los Estandares de contenido y Expectativas de grado del Programa de Ciencias [Puerto Rico Core Standards] la ensenanza de esta teoria. Sin embargo, no se encontraron preguntas sobre la seleccion natural en los ejercicios de practica provistos por el Departamento de Educacion para las pruebas estandarizadas lo cual puede influir para que no se ensene adecuadamente. Las preguntas de investigacion fueron 1. ¿Cuales son las concepciones y concepciones alternativas de estudiantes universitarios/as y de los futuros maestros y maestras de Ciencia sobre la TEB? 2. ¿Cuales conceptos que seleccionan los estudiantes universitarios/as y los futuros maestros y maestras de Ciencia sobre la TEB coinciden con lo aceptado como valido por la comunidad cientifica? y 3. ¿Como comparan las respuestas de la prueba original. v. Entendiendo el cambio biologico que mide concepciones y CA sobre la TEB por seleccion natural, con las de la traducida al idioma espanol? Se utilizo el metodo cuantitativo con un diseno de investigacion transversal por encuesta. La tecnica principal para recopilar los datos fue una prueba con doce items, que formo parte de un instrumento para el cual se recopilaron diversas fuentes de evidencia acerca de su validez. Las muestras estuvieron formadas por 69 estudiantes de Ciencias Naturales y por 16 estudiantes futuros maestros y maestras del nivel secundario de la UPR-RP. Se utilizaron estadisticas descriptivas, analisis de Ji cuadrado y se calcularon los coeficientes alfa de Cronbach y de Spearman

  11. Deepening Democracy: Explaining Variations in the Levels of Democracy

    Science.gov (United States)

    2010-06-01

    Federal Electoral Institute IMF International Monetary Fund INEGI Instituto Nacional de Estadistica, Geografia e Informatica xvi ISI Import...Geografia e Informatica (INEGI), 1999. Anuario de Estadísticas por Entidad Federativa 2009. Aguascalientes, Mexico: INEGI, 2009. Anuario

  12. Obesidad Infantil.Alimentación,actividad física y medio ambiente

    OpenAIRE

    Cabrerizo, Sofía; Díez, Sara; Fernández, Bibiana

    2018-01-01

    Situación en Asturias del problema de la obesidad infantil,aspectos multifactoriales del problema,y elaboración de una serie de recomendaciones de las evidencias disponibles a partir de las evidencias disponibles y de una revisión bibliográfica. Consejería de Sanidad del Principado de Asturias

  13. La autobiografía, ¿género femenino?

    OpenAIRE

    Rivera Garretas, María-Milagros

    1999-01-01

    Pienso que se puede decir que la autobiografia es, historicamente, un genero literario mas de mujeres que de hombres. No 10 digo cuantitativamente, no 10 digo porque vaya a aportar una estadistica que 10 cuente asi y yo le de a esa estadistica valor demostrativo. No; pienso que el genero autobiografico es mas de mujeres que de hombres en terrninos de sentido, de significado. De sentido comtin, incluso: es un lugar comtin que las mujeres, cuando escriben, especialmente cuando escriben narrativ...

  14. Arrangement and statistics of storage containers of spent fuel for assemblies of the SFP of NPP-L V, Unit 1; Arreglo y estadistica de contenedores de almacenamiento de combustible gastado para los ensambles de la ACG de la Unidad 1 de la Central Nucleoelectrica Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Mijangos D, Z. E.; Vargas A, A. F.; Amador C, C., E-mail: zoedelfin@gmail.com [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Subgerencia de Ingenieria, Km 44.5 Carretera Cardel-Nautla, 91476 Laguna Verde, Alto Lucero, Veracruz (Mexico)

    2014-10-15

    This work presents the determination of assemblies of the spent fuel pool (SFP) of the nuclear power plant of Laguna Verde (NPP-L V) which are candidates to be assigned to storage containers of independent spent fuel, with the objective of liberating decay heat and to have more space in the SFP, for the store of retired assemblies of the reactors in future reloads of NPP-L V, besides that the removed assemblies of the SFP should be stored in specific containers to guarantee the physical safety of them, as well as the radiological protection to the population and the environment. The design of the containers considered in this work is to store a maximum of 69 assemblies; it has a thermal capacity of 26 kilowatts and allows storing assemblies with a minimum of 5 years of have been extracted of the reactor core. Is considered that in 2016 start the storage of the spent assemblies on the containers, the candidates assemblies to store cover from the first reload in 1991, until the assemblies deposited in the SFP in the 14 reload in 2010; therefore in 2016, such assemblies will have fulfilled with the criteria of 5 years of have been removed of the Reactor, also the 69 assemblies assigned to each container will have a resulting decay heat that does not exceed the thermal capacity of the container, but that in great percentage approximates to the same one, and this way to take full advantage of their storage capacity and thermal capacity for each container. This work also contains the arrangement to accommodate the assemblies in the containers; such arrangement is constituted by areas according to the decay heat of each assembly. (Author)

  15. Application of the thermal plasma technique in the treatment of stone surfaces; Aplicacion de la tecnica de plasmas termicos en el tratamiento de superficies petreas

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez A, Z I

    2000-07-01

    The stone materials which form part of the cultural heritage of Mexico, are degraded under the united action of water, atmospheric gases, air pollution, temperature changes and the microorganisms action; provoking on the stone: fissures, crevices, scalings, fragmentations, pulverizations, etc. Therefore, the purpose of this work is to study the possibilities to apply a protective coating on the stone surfaces, previously clean and consolidated, through the thermal plasma technique. The purpose is to analyse the physical and chemical properties of three types of stone materials: quarry, tezontle and chiluca, usually used in constructions of cultural interest such as: historical monuments, churches, sculptures, etc., before and after to be submitted to the action of thermal plasma in order to examine the feasibility in the use of this coating technique in this type of applications. The application of conventional techniques to determine: porosity, density, absorption, low pressure water absorption and crystallization by total immersion of nuclear techniques such as: neutron activation analysis, x-ray diffraction and scanning electron microscopy as well as of instrumental techniques: optical microscopy, mechanical assays of compression, flexure and surface area calculations, allowed to know the chemical and physical properties of the stone material before and after to be treated through the thermal plasma technique, projecting quartz on the stones surface at different distances and current intensity and showing the effect caused by the modifications or surface alterations present by cause of the application of that coating. the obtained results provide a general panorama of the application of this technique as an alternative to the maintenance of the architectural inheritance built in stone. (Author)

  16. Experimental study of TJ-1 plasma using scattering and radiation emission techniques; Analisis experimental del plasma TJ-1 con tecnicas de scattering y emision de radiacion

    Energy Technology Data Exchange (ETDEWEB)

    Pardo, C; Zurro, B

    1987-07-01

    The Thomson scattering system of TJ-1 is described in detail. The radial profiles of Te and ne obtained in TJ-1 discharges are presented. This data make possible to deduce characteristic parameters of the plasma confinement in this machine, as energy confinement times, Zeff B. Using also radiation measurements (global and in the visible range) we obtained the particle confinement time and Zeff without non experimental assumptions. (Author) 52 refs.

  17. Field in field technique in two-dimensional planning for whole brain irradiation; Tecnica field in field em planejamentos bidimensionais para irradiacao de cerebro total

    Energy Technology Data Exchange (ETDEWEB)

    Castro, A.L.S.; Campos, T.P.R., E-mail: radioterapia.andre@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte (Brazil). Departamento de Engenharia Nuclear

    2016-11-01

    Radiotherapy is the most used clinical method used for brain metastases treatment, the most frequent secondary tumors provided by breast, lung and melanomas as primary origin. The protocols often use high daily doses and, depending on the irradiation technique there is high probability of complications in health tissues. In order to minimize adverse effects, it is important the dosimetric analysis of three-dimensional radiotherapy planning through tomographic images or, concerning to the 2D simulations, by the application of techniques that optimize dose distribution by increasing the homogeneity. The study aimed to compare the 2D and 3D conformal planning for total brain irradiation in a individual equivalent situation and evaluate the progress of these planning applying the field in field technique. The methodology consisted of simulating a two-dimensional planning, reproduce it on a set of tomographic images and compare it with the conformal plan for two fields and four fields (field in field). The results showed no significant difference between 2D and 3D planning for whole brain irradiation, and the field in field technique significantly improved the dose distribution in brain volume compared with two fields for the proposal situation. As conclusion, the two-dimensional plane for the four fields described was viable for whole brain irradiation in the treatment of brain metastases at the proposal situation. (author)

  18. Application of analysis techniques cause root for evaluation of non-conformities; Aplicacion de las tecnicas de analisis causa raiz a la evaluacion de disconformidades

    Energy Technology Data Exchange (ETDEWEB)

    Domingo Cruz, C.; Gonzalvo, A.

    2012-07-01

    The analysis techniques cause root are used in the evaluation of incidents at nuclear power plants. Its purpose is to determine the ultimate cause to establish corrective actions to prevent these events or other similar in the future. If the consequences are greater should make a more detailed study to determine the WHAT, HOW and WHY the incident.

  19. Application of the techniques of Multivariate analysis in the characterization of germplasm of Quinua; Aplicacion de tecnicas de Analisis multivariado en la caracterizacion de germoplasma de Quinua

    Energy Technology Data Exchange (ETDEWEB)

    Garcia A, J.M.; Torres de la Cruz, E. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jmga@nuclear.inin.mx

    2004-07-01

    Its were evaluated 20 lines of Chenopodium quinoa respect characters of agronomical interest finding that nine lines overcame the witness highlighting the lines: 20R1-41, 20R1-10, 20R2-27 that presented near yield to 1.5 ton/ha. The multivariate analysis of main components generated a dendrogram in that is appreciated that at an Euclidean distance of 0.75 its were formed seven groups according to its morphological characteristics and of yield, it highlights the formation of two big groups at a distance of 1.125, that they separate according to the radiation dose (200 and 250 Gy). (Author)

  20. Use of sting-response techniques for simulate diagnostics in human esophagus; Uso de tecnicas estimulo-respuesta para simular diagnosticos en esofago humano

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, I.; Gonzalez, Y.; Valdes, L.; Alfonso, J.A.; Estevez, E. [Facultad de Quimica Farmacia, Universidad Central de Las Villas (Cuba)

    2003-07-01

    In this work a study of simulation of the gamma graphic studies that are carried out in human esophagus in the Dept. of Nuclear Medicine of the 'Celestino Hernandez Robau Hospital of Santa Clara is presented. For the investigation tubular reactors were used and sting-response techniques with radioactive tracer of Technetium 99 metastable to a concentration of 1 mCi and several flows were applied. The distribution curves of residences times were obtained, those that respond to an equation of the type: Y = A + B exp (- exp((x-C)/D)) - ((x-C/D)+1). They were also carried out, optimizations studies of the doses of the radioactive to give to the patients from 1 mCi (that is the one used in studies) up to 0,5 mCi, and the influences on the obtained distributions of residence time were analyzed. It was confirmed the possibility to lower the doses with clear information of the signal. It was also carried out a simulation of the attenuation of the radiations that takes place in the patients by the interposition of tissues among the analyzed organ, and the detection equipment. It was used paraffin for tissue simulation. It was found the almost independence of the intensity of the radiations with the thickness, for the assayed doses. Lastly it was found a complex mathematical model that responds to the diagnostic curves obtained in these studies, being correlated the coefficients of the pattern with the most important physical parameters of the system, giving it a practical and useful value, all time that the error among the values that this it predicts and the experimental ones do not surpass of 5%. (Author)

  1. Technical viability of nitric leaching in the desulphurisation of lignite from the Teruel region. La lixiviacion nitrica como posibilidad tecnica en la desulfuracion de los lignitos de Teruel

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, R.; Clemente, C.; Gomez-Limon, D. (Esc. Tec. Sup. Ing. Min., Madrid (Spain))

    1989-11-01

    Studies of selective flocculation and sedimentation of Teruel lignite which is high in both pyritic and organic sulphur enabled the sulphur content to be reduced to just 4.25%. Tests have subsequently been carried out with nitric leaching and the sulphur content has been reduced to below the levels of organic sulphur in addition to reducing the ash content by 4 to 9%. The cost of the reagents was similar or lower than in other processes and practically all the coal was recovered. 11 refs., 1 fig., 4 tabs.

  2. Ficus benjamina grown on pot with ebb-flood; Primo ciclo di coltivazione di Ficus benjamina con tecnica Ebb-Flood

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    The trial was carried out in 1994 in the experimental station at Tavazzano.The aim was to evaluate the production of Ficus Benjamina grown on pot with Ebb-Flood (closed system) and with a traditional technique. The trial started at february 8 and ended, after 154 days of cultivation, at june 29. Salinity an nutritional aspects of the soil solution were controlled during the cultural cycle, by means water extract analysis, taking into account the upper, medium end lower layers of the substrate in the pot, and also the growth of the plant at different ages during the cultivation, were considered. At the end of the trail the plants grown with Ebb-Flood technique showed a better development (vegetative mass and length) than those grown traditionally, with an higher commercial value.

  3. Analysis of sample composition using resonant ionization and time-of-flight techniques; Analisis de composicion de muestras mediante ionizacion resonante y tecnicas de tiempo de vuelo

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, A de la; Ortiz, M; Campos, J

    1995-07-01

    This paper describes the setting up of a linear time-of-flight mass spectrometer that uses a tunable laser to produce resonant ionization of atoms and molecules in a pulsed supersonic beam. The ability of this kind of systems to produce time resolved signals for each species present in the sample allows quantitative analysis of its composition. By using a tunable laser beam of high spectral resolution to produce ionization, studies based on the structure of the photoionization spectra obtained are possible. In the present work several isotopic species of ordinary and deuterated benzene have been studied. Special care has been dedicated to the influence of the presence of a 13C in the ring. In this way values for spectroscopic constants and isotopic shifts have been obtained. Another system based in a homemade proportional counter has been designed and used is an auxiliary system. The results obtained with it are independent of these mentioned above and compatible with them. This system is of great utility for laser wavelength tuning to produce ionization in the mass spectrometer. (Author) 98 refs.

  4. Adjusting of the power-factor correction. Technical, economic and financial implications; Calculo de correccion del factor de potencia. Implicaciones tecnicas, economicas y financieras

    Energy Technology Data Exchange (ETDEWEB)

    Eficiencia Energetica aplicada (Energiza) [Ciudad Juarez, Chihuahua (Mexico)

    2005-07-01

    A power-factor is a device formed by a dielectric set and electrodes within a container with terminals, able to contribute with capacitance to an electrical circuit, such as: transformers, induction motors, regulators, air conditioning, welding machines, induction furnaces and ballasts. This document also tells us about the location of capacitors in their system, the electrical conductor, the monthly consumption electricity bill, of the benefits when adjusting the power-factor, the liberation of power of the transformer, the reduction of current in feeders, the reduction of losses in feeders, the diminution of the tension fall and the approximate average sale price. [Spanish] Un factor de potencia es un dispositivo formado por un conjunto de dielectrico y electrodos dentro de un recipiente con terminales, capaz de aportar capacitancia a un circuito electrico, como lo son: transformadores, motores de induccion, reguladores, aire acondicionado, maquinas soldadoras, hornos de induccion y balastros. Este documento tambien nos habla acerca de la localizacion de capacitores en su sistema, del conductor electrico, del recibo de consumo mensual de energia, de los beneficios al corregir factor de potencia, la liberacion de potencia del transformador, la reduccion de corriente en alimentadores, la reduccion de perdidas en alimentadores, la disminucion de la caida de tension y el precio de venta promedio aproximado.

  5. Evaluation of radon measuring technique using passive detector activated carbon; Avaliacao da tecnica de medicao do radonio utilizando detector passivo com carvao ativado

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Paulo Roberto Rocha; Lessa, Edmilson de Lima; Oliveira, Evaldo Paulo de, E-mail: epoliveira@aluno.ird.gov.br [Instituto de Radioprotecao e Dosimetria, (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Radioprotecao Ambiental e Ocupacional

    2014-07-01

    This study aims to evaluate the efficiency of measuring the radioactive gas Radon ({sup 222} Rn) with passive detector activated carbon. Alpha Guard, exposure chamber, air sampler, default font Radio, calibrator flow, flow adjuster, ducts drivers: For this, various equipment to make the measurement system as were used. An assembly of such equipment, with specific sequence was used allowing for more efficient exposure of passive detectors Radon gas. Twenty samples were heated to remove moisture and then stored in desiccator until the experiment were made. The exhibition was held passive dosimeters being removed from the chamber, and one hour after, subjected to analysis by gamma spectrometry in germanium (HPGe) for an hour. Subsequently, other measurements were made at scheduled times and sequential for one hour. The results were presented in report form and spectra, measures and graphs generated by Alpha Guard were also extracted. Finally we calculated the efficiency of the passive meter activated carbon. (author)

  6. Determination of essential elements in dietetic sample by neutron activation analysis; Determinacao de elementos essenciais em alimentos dieteticos pela tecnica de analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Siquelli, Murilo V.; Maihara, Vera A. Maihara [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Lab. de Analise por Ativacao Neutronica]. E-mail: murilo_siquelli@hotmail.com; vmaihara@ipen.br

    2005-07-01

    In the last years there has been an increase of the dietetic product consumption by people who suffer from diabetes, heart disease and by people concerned about having a healthy life as well. Despite the increase of dietetic product presents in the diet of the Brazilian population, the use of these products is still controversial. The analysis of the nutritional composition of these products is becoming important because a great number of people is changing their traditional food by dietetic products. In the literature, there is no information about the inorganic composition, mainly related to the essential elements, in the dietetic products: diet and light . In this study are presented preliminary results of the concentrations of Br, Ca, Cr, Fe, Na and Zn determined by Instrumental Neutron Activation Analysis in aspartame, saccharin and cyclamate sodium , and stevia based sweetener samples. Gelatin samples, diet and light, were also analyzed. Methodology validation was done analyzing NIST reference materials Tea Leaves (INCT-TL-1) and Mixed Polish Herbs (INCT-MPH-2). (author)

  7. Study of an optimization protocol for radiographic techniques in computerized radiology; Estudo de um protocolo de otimizacao para as tecnicas radiograficas em radiologia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Abrantes, Marcos Eugenio Silva

    2015-07-01

    This work is designed to produce information for the improvement of image quality to deployment in a radiology department based on previous reviews of the images by questionnaires of acceptance and quality e recognition of the parameters used in chest radiographic techniques. The data collected were divided by male, female, PA and LAT thickness, body mass index, biotypes, anthropomorphic parameters and body evaluation associated with constant voltage and the additional filtration. The results show the predominance of 35 and 40 constants with additional filtration from 0.5 to 1.5 mmAl, voltage in male: (PA and LAT) 86-92 kV and 96-112 kV, female: 85-98 kV and 96-112 kV. The charge applied to the tube for males: (PA and LAT) 5-10 mA.s and 5-16 mA.s, female: (PA and LAT) 6.3-8 mA.s and 9-14 mA.s. Absorbed doses for males: (PA and PF) 0.04-0.17 mGy and 0.03-0.19 mGy and from female (PA and PF) from 0.03-0.22 mGy and 0, 04-0.17 mGy. This procedure can be used in radiology department to implement and acceptance in the quality of images. (author)

  8. Dynamic system for the evaluation of CIM monitoring and control techniques; Sistema dinamico para avaliacao de tecnicas de monitoracao e controle da CIM

    Energy Technology Data Exchange (ETDEWEB)

    Penna, Monica de Oliveira [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Biotecnologia e Ecossistemas]. E-mail: mpena@cenpes.petrobras.com.br; Baptista, Walmar; Brito, Rosane Fernandes de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Tecnologia de Materiais, Equipamentos e Corrosao]. E-mails: walmar@cenpes.petrobras.com.br; rosanef@cenpes.petrobras.com.br; Silva, Edilson Domingos da; Nascimento, Juliana Rangel do [Fundacao Gorceix, Ouro Preto, MG (Brazil)]. E-mails: edilson@cenpes.petrobras.com.br; julianarn@cenpes.petrobras.com.br; Coutinho, Claudia M.L.M. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Biologia. Dept. de Biologia Celular e Molecular

    2002-03-01

    In general, the two main problems associated to the water injection system for secondary petroleum recovery are the corrosion control and the decrease in solid injection in the reservoir. Corrosion problems in injection water systems may have abiotic as well as biotic causes, and the occurrence of reservoir plugs can result from the injection of particles (suspended solids as well as corrosion products), bacteria and fouling formation. Due to the need to implement a methodology for the evaluation of abiotic and biotic corrosive processes, monitoring techniques and MIC control in a dynamic system, an apparatus was built that simulates the characteristics of a water injection system. The apparatus allows monitoring and control of the parameters that, when varied, may influence the performance of the quality of the injected water. The dynamic system was designed to simulate as precisely as possible the conditions that allow the SRB and heterotrophic bacteria to create fouling in a water injection system. This article discusses the dynamic system, analytical methods and some preliminary results. (author)

  9. APLICACIÓN DE LA TECNICA DE IV GAMA PARA LA ELABORACIÓN DE ENSALADAS EVALUATION OF IV GAMA TECHNIQUE TO PREPARE VEGETABLE SALADS

    Directory of Open Access Journals (Sweden)

    Auris Damely García Méndez

    2008-12-01

    Full Text Available El propósito de la aplicación de la técnica de IV Gama en la elaboración de ensaladas listas para el consumo fresco, esta dirigido al control del deterioro en lechuga americana (Lactuca sativa, zanahoria (Daucus carota L., radicchio (Cichorium intybus L. y escarola (Cichorium endivia L., destinadas a preparar ensaladas tipo “Mediterránea y Cheff”. La metodología permitió seleccionar y evaluar la técnica de IV Gama, así como las buenas prácticas de manufactura para extender la vida comercial de las ensaladas y garantizar la seguridad alimentaria para la población potencialmente consumidora. La aplicación combinada de soluciones de cloruro de calcio al 1%, acido cítrico a 0,1% y oxido de magnesio al 0,5% contribuyo a mantener la calidad de las ensaladas por un período de 16 días bajo refrigeración a 5 + 1 °C y 95 + 5% HR. En conclusión las técnicas ensayadas, posibilitaron extender el valor comercial de estos productos.The purpose of applying the fresh-cut technique in preparing vegetable salads ready for fresh consumption, was aimed to control the damage American lettuce (Lactuca sativa; carrot (Daucus carota L; Radicchio (Cichorium intybus L and endive (Cichorium endivia L.“ Mediterranean and Cheff” style salads were prepared for evaluation. The methodology allowed selecting and evaluating fresh-cut technique as well as good manufacturing practices, to extend the commercial life, and guarantee alimentary food safety to people. Use of 1% calcium chloride; 0.1% citric acid and 0.5% magnesium oxide solutions; allowed to maintain the quality of the salads for a period of 16 up to days, under refrigeration at 5± 1ºC and 95 ± 5 % RH. Finally the assays techniques let to extend the commercial value of these vegetables.

  10. Characterization, analysis and dating of archaeological ceramics from the Amazon basin through nuclear techniques; Caracterizacao, analise e datacao de ceramicas arqueologicas da Bacia Amazonica atraves de tecnicas nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Latini, Rose Mary

    1998-07-01

    The aim of this work is to contribute to the research in the reconstruction of part of the pre-history of the Amazon Basin by means of an analytical methods combined with multivariate analysis, given a analytic basis that can be continued by the archaeological work, through the identification, classification, provenance and dating the ceramics found in different archaeological sites of the Hydro graphic Basin of the Purus river. Neutron activation analysis in conjunction multivariate statistical methods were used for the identification and classification and thermoluminescence was used for the dating. Chemical composition results were in better agreement with archaeological classification for the archaeologically define Iquiri, Quinan and Xapuri phases and less characteristics the Iaco and Jacuru archaeological phase were not well characterized. An homogeneous group was established by most of the samples collected from the Los Angeles Archaeological Site (LA) and was distinct from all the other groups analysed. The provenance studies made with ceramics collected at this site shows that they were made with clay from nearby river (Rio Ina). From the LA ceramics dating the average date of site occupation was 1660 years. The ceramic dating results from the external wall of a circular earth wall construction confirm the relation with the local pre-history. Beyond the Acre material two urns were dated from the Archaeological Site Morro Grande and Sao Jose at Araruama, Rio de Janeiro. (author)

  11. The study of cultural objects by nuclear and conventional techniques; Estudio de bienes culturales con tecnicas de caracterizacion nucleares y convencionales

    Energy Technology Data Exchange (ETDEWEB)

    Palacios, Tulio A [Comision Nacional de Energia Atomica, General San Martin (Argentina). Centro Atomico Constituyentes

    2000-07-01

    A survey is given of the techniques that are used at the National Atomic Energy Commission of Argentina for the characterization and study of cultural and archaeological specimens. A short history of these activities is also given. (author)

  12. Digital filtering techniques applied to electric power systems protection; Tecnicas de filtragem digital aplicadas a protecao de sistemas eletricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Brito, Helio Glauco Ferreira

    1996-12-31

    This work introduces an analysis and a comparative study of some of the techniques for digital filtering of the voltage and current waveforms from faulted transmission lines. This study is of fundamental importance for the development of algorithms applied to digital protection of electric power systems. The techniques studied are based on the Discrete Fourier Transform theory, the Walsh functions and the Kalman filter theory. Two aspects were emphasized in this study: Firstly, the non-recursive techniques were analysed with the implementation of filters based on Fourier theory and the Walsh functions. Secondly, recursive techniques were analyzed, with the implementation of the filters based on the Kalman theory and once more on the Fourier theory. (author) 56 refs., 25 figs., 16 tabs.

  13. Comparative review of techniques used for in situ remediation of contaminated soils; Revision comparativa de tecnicas empleadas para la descontaminacion in situ de suelos contaminados

    Energy Technology Data Exchange (ETDEWEB)

    Escusol Tomey, M.; Rodriguez Abad, R.

    2014-07-01

    Soil pollution may influence the geotechnical parameters of the soil itself, properties such as solid particle density or water within its pores. It may also vary its friction angle, modify its structure and texture, or change the properties of its constitutive minerals due to the inclusion of polluting components. For these reasons, soil decontamination is an important factor to consider in geotechnics. This work focuses on those soil decontamination techniques carried out in situ, since they allow to eliminate soil pollutants in a less invasive way than confinement, containment or ex situ remediation techniques, causing a minor soil alteration and, therefore, affecting less to its mechanical properties. These factors should be taken into account when carrying out a geotechnical performance on a previously decontaminated soil. (Author)

  14. Dosimetric comparison of treatment techniques IMRT and VMAT for breast cancer; Comparacion dosimetrica de las tecnicas de tratamiento IMRT y VMAT para cancer en mama

    Energy Technology Data Exchange (ETDEWEB)

    Urbina, G. L. [Universidad Nacional de Ingenieria, Maestria en Fisica Medica, Av. Tupac Amaru s/n, Rimac, Lima 25 (Peru); Garcia, B. G., E-mail: gerlup@hotmail.com [Red AUNA, Clinica Delgado, Av. Angamos Cdra. 4 esquina Gral. Borgono, Miraflores, Lima (Peru)

    2015-10-15

    In this study the dosimetric distribution was compared in the different treatment techniques such as Volumetric Modulated Arc Therapy (VMAT) and Intensity Modulated Radiation Therapy (IMRT) in female patients with breast cancer with stage II-B and III-A, 6 cases (both calculated on VMAT and IMRT) were studied, comparison parameter that are taken into account are: compliance rate, homogeneity index, monitor units, volume dose 50 Gy (D-50%) and 5 Gy (D-5%) volume dose. Comparisons are made in primary tumor volume to optimize treatment in patients with breast cancer, with IMRT using Step, Shoot and VMAT Monte Carlo algorithm, in addition to the organs at risk; the concern to make this work is due to technological advances in radiotherapy and the application of new treatment techniques, that increase the accuracy allowing treatment dose climbing delivering a higher dose to the patient. (Author)

  15. New desegregated sandstone drilling techniques using self-lifting rigs; Novas tecnicas de perfuracao em arenitos desagregados com sondas auto-elevaveis

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Adiel; Damasceno, Luiz Carlos [PETROBRAS, Macae, RJ (Brazil). Distrito de Perfuracao do Sudeste. Div. de Perfuracao; Muniz, Renato Passos [PETROBRAS, Macae, RJ (Brazil). Distrito de Perfuraco do Sudeste. Div. de Tecnicas de Perfuracao

    1990-12-31

    Through the use of a high viscosity asphalt based drilling fluid very significant results have been obtained, in areas where the soil surface layers are predominantly loose and sandy. The use of this type of fluid, together with adequate drilling parameters, turn out to be well succeeded, with a reduction or elimination of previous difficult problems. Consequentially, a substantial cost reduction has been achieved along with application possibilities in any part of the country that presents similar formation characteristics. It is also has been proved that the technique is perfectly executable, proving an efficient planning work regarding operational and supplies support. (author) 5 refs., 2 figs., 3 tabs.

  16. Development of pathological anthropomorphic models using 3D modelling techniques for numerical dosimetry; Desenvolvimento de modelos antropomorficos patologicos usando tecnicas de modelagem 3D para dosimetria numerica

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Kleber Souza Silva [Faculdade Integrada de Pernambuco (FACIPE), Recife, PE (Brazil); Barbosa, Antonio Konrado de Santana; Vieira, Jose Wilson [Instituto Federal de Educacao, Ciencia e Tecnologia de Pernambuco, Recife, PE (Brazil); Lima, Fernando Roberto de Andrade, E-mail: falima@cnen.gov.b [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2011-10-26

    Computational exposure models can be used to estimate human body absorbed dose in a series of situations such as X-Ray exams for diagnosis, accidents and medical treatments. These models are fundamentally composed of an anthropomorphic simulator (phantom), an algorithm that simulates a radioactive source and a Monte Carlo Code. The accuracy of data obtained in the simulation is strongly connected to the adequacy of such simulation to the real situation. The phantoms are one of the key factors for the researcher manipulation. They are generally developed in supine position and its anatomy is patronized by compiled data from international institutions such as ICRP or ICRU. Several pathologies modify the structure of organs and body tissues. In order to measure how significant these alterations are, an anthropomorphic model was developed for this study: patient mastectomies. This model was developed using voxel phantom FASH and then coupled with EGSnrc Monte Carlo code

  17. Cone beam computed tomography in veterinary dentistry: description and standardization of the technique; Tomografia computadorizada de feixe conico na odontologia veterinaria: descricao e padronizacao da tecnica

    Energy Technology Data Exchange (ETDEWEB)

    Roza, Marcello R. [Universidade Federal de Goias (UFG), Goianai, GO (Brazil)], e-mail: marcelloroza@gmail.com; Silva, Luiz A.F.; Fioravanti, Maria C. S. [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Escola de Veterinaria. Dept. de Medicina Veterinaria; Januario, Alessandro L. [International Team for Implantology (ITI), Sao Paulo, SP (Brazil); Barriviera, Mauricio [Universidade Catolica de Brasilia (UCB), DF (Brazil). Faculdade de Odontologia. Dept. de Radiologia; Oliveira, Alexandre C.A. [Faculdade de Odontologia Sao Leopoldo Mandic, Campinas, SP (Brazil)

    2009-08-15

    Eleven dogs and four cats with buccodental alterations, treated in the Centro Veterinario do Gama, in Brasilia, DF, Brazil, were submitted to cone beam computed tomography. The exams were carried out in a i-CAT tomograph, using for image acquisition six centimeters height, 40 seconds time, 0.2 voxel, 120 kilovolts and 46.72 milli amperes per second. The ideal positioning of the animal for the exam was also determined in this study and it proved to be fundamental for successful examination, which required a simple and safe anesthetic protocol due to the relatively short period of time necessary to obtain the images. Several alterations and diseases were identified with accurate imaging, demonstrating that cone beam computed tomography is a safe, accessible and feasible imaging method which could be included in the small animal dentistry routine diagnosis. (author)

  18. Technical and functional considerations of the portable electron accelerator, mobetron, for intraoperative radiotherapy; Consideraciones tecnicas y funcionales del acelerador de electrones portatil, mobetron, para radioterapia intraoperatoria

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Cases, F. J.; Javier de Luis, F.; Herranz Gonzalez, M.; Canon Rodriguez, R.; Munoz Miguelanez, T.; Aakki, L.; Azinovic Gamo, I.; Brugarolas Masllorens, A.

    2013-07-01

    This work reveals the peculiarities which must be taken into account for the clinical use of this type of accelerators, regarding its operational stability and describe the problems that arise in the logistics work, both from the point of view of the physical dosimetry and radiation protection. (Author)

  19. Minerals and trace elements determination in diets by neutron activation analysis; Determinacao de elementos minerais e tracos em dietas pela tecnica de ativacao neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Eiras, Maria Izabel O.; Favaro, Debora I.T. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Lab. de Analise por Ativacao Neutronica; Ribeiro, Marisilda; Cozzolino, Silvia M.F. [Sao Paulo Univ., SP (Brazil). Dept. de Alimentos e Nutricao Experimental. Lab. de Minerais

    2002-07-01

    In the present study 12 diets, each one consisting of a pool of seven day diets, composed by four meals: breakfast, lunch, dinner and snack, adequate in energy and macro nutrients according to the RDA (Recommended Daily Allowance) recommendations, were elaborated and offered to a group of 12 men (19-42 years). The diets were collected by duplicate portion technique and dried by two different processes: freeze drying and 60 deg C ventilated oven drying. In the total, 24 diets were analyzed. The content of some minerals and trace elements (Ca, Fe, Mg, Mn, Na, Se and Zn) were determined by Instrumental Neutron Activation Analysis. The validation of methodology was made by analysis of the reference materials Typical Diet (NIST SRM 1548{sup a}), Orchard Leaves (NIST SRM 1541) and Peach Leaves (NIST SRM 1547). The results observed by two different drying processes used were statistically compared by test T of Student. It was possible to conclude that the concentration means can be considered as statistically equal, within a significance level of 0.05. The daily intake values calculated from the concentration results were: 712 ({+-} 59) mg Ca/day; 10.7 ({+-} 0.8) mg Fe/ day; 3387 ({+-} 16) mg K/ day; 275 ({+-} 6) mg Mg/ day; 3.0 ({+-} 0.5) mg Mn/ day; 3656 ({+-} 699) mg Na/ day; 42 ({+-} 6) {mu}g Se/ day e 11.6 ({+-} 2.4) mg Zn/ day. The calculated intake was compared to the new daily recommended values set by RDA (National Research Council-USA) for the range age of individuals studied. It was possible to conclude that the diets were adequate in Fe and Zn and inadequate for the other elements. Concerning the minerals Na and K we verified high daily intake levels and this was already observed in other Brazilian regional diets. (author)

  20. Multimedia tutorial system to aid the technical training in energy cogeneration; Sistema tutorial multimedio para apoyar la capacitacion tecnica en cogeneracion de energia

    Energy Technology Data Exchange (ETDEWEB)

    Kemper Valverde, Nicolas; Lara Rosano, Felipe; Guerrero Briseno, Pedro [Laboratorio de Inteligencia Artificial, Instituto de Ingenieria UNAM, Mexico, D. F. (Mexico); Monedero De La Vega, Arturo F. [Seccion Ingenieria Energetica, DEPFI UNAM, Mexico, D. F. (Mexico)

    1994-12-31

    The incorporation of computer aided teaching technologies increases the efficiency in the transmission and acquisition of knowledge, allowing the handling of large information volumes, the knowledge homogenization among the students, the availability, the massive teaching and the permanent updating of the same. On the other hand, considering that all energy saving policy must be supported in a training and dissemination program of the respective energy technologies an immediate option is the use of computerized systems of teaching-learning. Precisely, in this paper, are presented the fundamental technical aspects for the development of a tutorial expert system, to aid the training in energy cogeneration, trying to integrate in the application, the usage of multimedia tools with the intelligent handling of the teaching-learning process through the inference machine of an expert system. [Espanol] La incorporacion de metodologias de ensenanza auxiliada por computadora incrementa la eficiencia en la transmision y adquisicion del conocimiento, permitiendo la manipulacion de grandes volumenes de informacion, la homogeneizacion del conocimiento en los educandos, la disponibilidad, masificacion y la permanente actualizacion del mismo. Por otro lado, considerando que toda politica de ahorro de energia debe estar soportada en un programa de capacitacion y de divulgacion de las tecnologias energeticas respectivas, una alternativa inmediata es el empleo de sistemas computarizados de ensenanza-aprendizaje. Precisamente, en este trabajo, se presenta los aspectos tecnicos fundamentales del desarrollo de un sistema experto tutorial para apoyar la capacitacion en cogeneracion de energia, tratando de integrar en la aplicacion, el empleo de las herramientas multimedios con el manejo inteligente del proceso de ensenanza-aprendizaje a traves de la maquina de inferencia de un sistema experto.

  1. Description and implementation of acid/base titrimetric techniques for process monitoring; Descripcion e implementacion de tecnicas titrimetricas acido/base para la monitorizacion de procesos

    Energy Technology Data Exchange (ETDEWEB)

    Marcelino Represa, M.; Guisasola i Canudas, A.; Casa Alvero, C.; Lafuente Sancho, F. J.

    2006-07-01

    The basis of titrimetric techniques is that the proton production (or consumption) rate can be indirectly measured with the amount of base (or acid) dosage necessary to maintain the pH at a certain setpoint value. Titrimetric measurements are very useful for the monitoring of any process that influences pH with simple equipment (an accurate pH control loop). This work describes the theoretical basis of titrimetric measurements and shows three examples of the application of titrimetric techniques for the process monitoring: CO{sub 2} absorption, nitrification and biological organic matter removal. (Author)

  2. Experimental study on two-phase flow in horizontal duct using a visualization technique; Estudo experimental de escoamentos bifasicos em duto horizontal usando uma tecnica de visualizacao

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Livia A.; Tomas, Bruno T.; Cunha Filho, Jurandyr S.; Su, Jian, E-mail: livia.alves.oliveira@gmail.co [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear; Faccini, Jose L.H. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    In this paper an experimental study is performed for visualization of water-air two phase flow, stratified and intermittent, in a 51 mm internal diameter circular section horizontal tube. The study consists in filming a water-air mixture passin by a transparent interval of the tube, using a high speed camera. After that, the obtained images are analysed frame after frame and then, data are extracted of weight of gas-liquid interfaces, length and gas bubbles speeds. Then, these data are verified with experimental and theoretical correlations available in the literature

  3. Characterization of plutonium isotopes in air samples retrospectives techniques ultrasensitive; Caracterizacion de isotopos de plutonio en muestras de aire mediante tecnicas restrospectiva ultrasensibles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This paper presents preliminary results for the determination of plutonium isotope ratios that characterize the natural background for later comparison with that obtained during the dismantling operations. In this manner can be performed retrospective analysis of radiation from the air quality.

  4. Comparison of three techniques for skin total irradiation with electrons; Comparacao de tres tecnicas de irradiacao total da pele com eletrons

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Delano V.S., E-mail: dbatista@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Instituto Nacional de Cancer (INCa), Rio de Janeiro, RJ (Brazil); Bardella, Lucia H. [Instituto Nacional de Cancer (INCa), Rio de Janeiro, RJ (Brazil); Rosa, Luiz A.R. da, E-mail: lrosa@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2011-10-26

    This paper compared three techniques of skin total irradiation with electrons: 1) horizontal positioning, 2) vertical positioning - rotatory technique and 3) vertical positioning - six fields technique. For that, a anthropomorphic phantom was positioned according to the recommendation for each technique and was i radiated at the linear accelerator by using the 6 MeV electrons. Radiochromic films were positioned on the surface in various regions of the phantom for measurement of absorbed dose. A ionization chamber was positioned inside of equivalent issue plates for dose evaluation due to the photons produced by electron stopping. The technique 2 and 3 have shown too similar in the results and number or discrepant points (8 and 10 respectively) of prescription lower than the technique 1 (22 points). The total body dose of photons of the 1, 2 and 3 techniques was 2.2%, 5.3% and 5.2% respectively

  5. A proposal to study the esophageal transit by biomagnetic and scintigraphic study; Uma nova proposta para o estudo do transito esofagiano atraves das tecnicas biomagneticas e cintilograficas

    Energy Technology Data Exchange (ETDEWEB)

    Daghastanli, N.A.; Braga, F.J.H.N.; Baffa, O. [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Fisica; Oliveira, R.B. [Faculdade de Medicina de Ribeirao Preto, SP (Brazil)

    1996-12-31

    The initial results for a new apparatus to study the esophageal transit time is studied in asymptomatic persons for a yogurt bolus (10 ml). The bolus is uniformly labeled with 5 g of ferrite powder (biomagnetic study, B) or 350 MBq of {sup 99m} Tc (scintigraphic study, C). For the B study the detection is made by means two pair of coils in opposite phase excited by a 10 k Hz sinusoidal voltage. The signal response is obtained when the bolus traverses the coils placed on the regions-of-interest (ROIs) of the esophagus (furcula, F and xiphoid process, X) and produces a signal voltage that is measured by a lock-in amplifier Stanford SR530. For C studies an Orbiter Siemens scintillation camera is used linked to a computer. The data analysis shows a (4.1{+-}0.7)s in B studies and (3.7{+-}0.9)s in C studies (R=0.6, P<0.07) 8 refs., 3 figs.

  6. Application of the gamma rays backscattering for determining the quantity of steel; Aplicacion de la tecnica de retrodispersion de los rayos gamma para determinar la cuantia del acero

    Energy Technology Data Exchange (ETDEWEB)

    Huapaya P, B F

    1996-11-01

    This work tries to purpose a methodology based on the nuclear technology available in the country, for measuring the position and diameter of the reinforcing rods placed in reinforced concrete structures. The technique of gamma backscattering that utilizes the changes of density was used for determining the presence of steel (average density of concrete 2,5 g/cm{sup 3} and steel 7,8 g/cm{sup 3}). The concrete test tubes of different resistances were prepared with diverse concentrations into the aggregates as crushed rock and coarse sand, and also with three steel rods of 0,5 inch separated by 4 inches among themselves. The source Cs-137 of 20 mCi in activity was a monoenergetic radioisotope of the element Cs from 662 KeV. The source was placed in a lead shield with a hole which generates a collimator beam of 2 mm. The detector was one type of scintillation (INa-Tl) 2 x 2 inch; it was sealed with lead and had a hole of 10 mm which worked as collimator. The shield was placed in an angle of 15 degrees over concrete surface in order to pick up the backscattering gamma rays by the concrete. The test tube was displaced over a little car affixed to a endless screw which permitted to reproduce displacements of 0,25 inch. The data recording was realized through a multichannel of 1024 channels where was accounted the number of counts viewed under the backscattering spectrum by the concrete. It is possible to determine the position and diameter of the steel rod into concrete, changing the parameters of detector collimator source, distance source-detector and type of concrete. Furthermore, it was shown that this same equipment can measure the density of the concrete. The applications of this equipment are used in the inspection works where it is necessary to make a non-destructive control of quality about the structure of building. (author). 7 refs., 46 tabs., 24 figs.

  7. Characterization of Loma Venturilla pegmatites using nuclear techniques; Caracterizacion de las pegmatitas de Loma Venturilla mediante el uso de tecnicas nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Pena Fortes, B; Caopte Rodriguez, G; Toujague La Rosa, R [Centro de Estudios Aplicados al Desarrollo Nuclear (CEADEN), La Habana (Cuba); Sukar Satraputa, K [Instituto de Geofisica y Astronomia, La Habana (Cuba)

    1996-10-01

    Neutron Activation Analysis (NAA) and gamma spectrometry Analysis (GEA) were used for the determination of 21 trace elements in geological samples of pegmatites of Loma Venturilla area. Both methods permitted, in general, the determination of K, Cr, Co, Sc, Rb, Cs, Ba, Ta, HF, Th, and U and 10 rare earths elements: La, Ce, Nd, Sm, Eu, Tb, Ho, Tm, Yb, and Lu. The results were obtained with good precision and accuracy The knowledge of such concentrations is of great interest in geosciences. The values of the concentrations obtained can be extensively used in petrogenetic studies of those rocks, since they facilitate the evaluation and estimation of the extent of the main process, involved in the generation and differentiation of the melts from which the pegmatites were derivates.

  8. Deposit of thin films of nitrided amorphous carbon using the laser ablation technique; Deposito de peliculas delgadas de carbono amorfo nitrurado utilizando la tecnica de ablacion laser

    Energy Technology Data Exchange (ETDEWEB)

    Rebollo, P.B.; Escobar A, L.; Camps C, E. [Departamento de Fisica, Instituto Nacional de Investigaciones Nucleares, C.P. 52045 Salazar, Estado de Mexico (Mexico); Haro P, E.; Camacho L, M.A. [Departamento de Fisica, Universidad Autonoma Metropolitana Iztapalapa (Mexico); Muhl S, S. [Instituto de Investigacion en Materiales, UNAM (Mexico)

    2000-07-01

    It is reported the synthesis and characterization of thin films of amorphous carbon (a-C) nitrided, deposited by laser ablation in a nitrogen atmosphere at pressures which are from 4.5 x 10 {sup -4} Torr until 7.5 x 10 {sup -2} Torr. The structural properties of the films are studied by Raman spectroscopy obtaining similar spectra at the reported for carbon films type diamond. The study of behavior of the energy gap and the ratio nitrogen/carbon (N/C) in the films, shows that the energy gap is reduced when the nitrogen incorporation is increased. It is showed that the refraction index of the thin films diminish as nitrogen pressure is increased, indicating the formation of graphitic material. (Author)

  9. Consideration on the technical service quality and the Portugal situation; Consideracoes sobre a qualidade tecnica de servico e caracterizacao da situacao em Portugal

    Energy Technology Data Exchange (ETDEWEB)

    Santana, J.; Afonso, Jose [Entidade Reguladora do Sector Electrico (ERSE), XX (Portugal)

    1999-07-01

    This paper presents some considerations on the technical quality of power supply for the consumption and, for the specific characterization of the Portugal electric sector, a summary analysis of the energy production, transport and distribution activities.

  10. Proposal for a technical-economic and environmental evaluation projects for distributed generation; Proposta de avaliacao tecnica-economica-ambiental para projetos de geracao distribuida

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, Marcio Zamboti [Universidade Severino Sombra, Vassouras, RJ (Brazil); Gouvea, Marcos Roberto [Universidade de Sao Paulo (USP), SP (Brazil)

    2008-07-01

    The multi discipline effects in engineering projects, mainly in those of infrastructure, have extended the borders of research to not only evaluate them of the conventional point of view, economic and technical, but also environmental and social. On the other hand, the investor who traditionally searched alternatives only considering the economic and financial performance currently is taken to analyze also the social and environmental aspects. The model described in this paper is a solution proposal to evaluate the merit of an enterprise of distributed generation of thermal origin, considering the economic, social and environmental aspects, using merit indexes that quantify, directly, economic aspects as capital return tax and operating income eliminates, as well as social factors like the impact in the education, health, income and employment rates and still, it verifies the attendance of the environmental restrictions. The solution presented brings a simple and clear form to attribute a merit degree of aggregate to the alternatives to embed distributed generation, considering the intensity of the subjective social responsibility of the investor. The presented model is an important contribution to stimulate a form to evaluate and to prioritize the multi discipline implementation to a distributed generation enterprise, also being able, to be used as financial index or other incentives of the sort. (author)

  11. Use of Monte Carlo Methods for determination of isodose curves in brachytherapy; Uso de tecnicas Monte Carlo para determinacao de curvas de isodose em braquiterapia

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Jose Wilson

    2001-08-01

    Brachytherapy is a special form of cancer treatment in which the radioactive source is very close to or inside the tumor with the objective of causing the necrosis of the cancerous tissue. The intensity of cell response to the radiation varies according to the tissue type and degree of differentiation. Since the malign cells are less differentiated than the normal ones, they are more sensitive to the radiation. This is the basis for radiotherapy techniques. Institutes that work with the application of high dose rates use sophisticated computer programs to calculate the necessary dose to achieve the necrosis of the tumor and the same time, minimizing the irradiation of tissues and organs of the neighborhood. With knowledge the characteristics of the source and the tumor, it is possible to trace isodose curves with the necessary information for planning the brachytherapy in patients. The objective of this work is, using Monte Carlo techniques, to develop a computer program - the ISODOSE - which allows to determine isodose curves in turn of linear radioactive sources used in brachytherapy. The development of ISODOSE is important because the available commercial programs, in general, are very expensive and practically inaccessible to small clinics. The use of Monte Carlo techniques is viable because they avoid problems inherent to analytic solutions as, for instance , the integration of functions with singularities in its domain. The results of ISODOSE were compared with similar data found in the literature and also with those obtained at the institutes of radiotherapy of the 'Hospital do Cancer do Recife' and of the 'Hospital Portugues do Recife'. ISODOSE presented good performance, mainly, due to the Monte Carlo techniques, that allowed a quite detailed drawing of the isodose curves in turn of linear sources. (author)

  12. Application perspectives of simulation techniques CFD in nuclear power plants; Perspectivas de aplicacion de tecnicas de modelado CFD en plantas nucleoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Galindo G, I. F., E-mail: igalindo@iie.org.mx [Instituto de Investigaciones Electricas, Reforma No. 113, Col. Palmira, 62490 Cuernavaca, Morelos (Mexico)

    2013-10-15

    The scenarios simulation in nuclear power plants is usually carried out with system codes that are based on concentrated parameters networks. However situations exist in some components where the flow is predominantly 3-D, as they are the natural circulation, mixed and stratification phenomena. The simulation techniques of computational fluid dynamics (CFD) have the potential to simulate these flows numerically. The use of CFD simulations embraces many branches of the engineering and continues growing, however, in relation to its application with respect to the problems related with the safety in nuclear power plants, has a smaller development, although is accelerating quickly and is expected that in the future they play a more emphasized paper in the analyses. A main obstacle to be able to achieve a general acceptance of the CFD is that the simulations should have very complete validation studies, sometimes not available. In this article a general panorama of the state of the methods application CFD in nuclear power plants is presented and the problem associated to its routine application and acceptance, including the view point of the regulatory authorities. Application examples are revised in those that the CFD offers real benefits and are also presented two illustrative study cases of the application of CFD techniques. The case of a water recipient with a heat source in its interior, similar to spent fuel pool of a nuclear power plant is presented firstly; and later the case of the Boron dilution of a water volume that enters to a nuclear reactor is presented. We can conclude that the CFD technology represents a very important opportunity to improve the phenomena understanding with a strong component 3-D and to contribute in the uncertainty reduction. (Author)

  13. Advances in the diagnosis of substations primary equipment by means of high sensitivity techniques; Avances en el diagnostico de equipo primario de subestaciones mediante tecnicas de alta sensibilidad

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Colon H, V. Rodolfo; Nava G, J. Armando; Azcarraga R, Carlos G [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2005-07-01

    In an electrical system, the substations primary equipment is integrated by the power transformers, the instrument transformers, the breakers and the interconnection circuits (energy cables). At the present time, the described primary equipment has been integrated in an arrangement denominated encapsulated substation that presents dimensional and aesthetic advantages in the conventional substations. Nevertheless, the isolation involved in this type of substations means new challenges when carrying out its diagnosis in a planned way or after the appearance of a fault. In this sense, the insulating and electromechanical system of the primary equipment of substations must be evaluated in a programmed way or be constantly monitored. This with the final purpose of detecting incipient problems that could evolve towards a fault or to the diminution of the electrical system reliability. [Spanish] En un sistema electrico, el equipo primario de subestaciones esta integrado por los transformadores de potencia, los transformadores de instrumento, los interruptores y los circuitos de interconexion (cables de energia). En la actualidad, el equipo primario descrito se ha integrado en un arreglo denominado subestacion encapsulada que presenta ventajas dimensionales y esteticas sobre las subestaciones convencionales. Sin embargo, el aislamiento involucrado en este tipo de subestaciones significa nuevos retos al efectuar su diagnostico de manera planeada o despues de presentarse una falla. En este sentido, el sistema aislante y electromecanico del equipo primario de subestaciones debe ser evaluado de manera programada o monitoreado constantemente. Ello con la finalidad de detectar problemas incipientes que pudieran evolucionar hacia una falla o la disminucion de la confiabilidad del sistema electrico.

  14. Evaluation of ultrasonic technique to characterize the concentration of boric acid in liquid medium; Avaliacao de tecnica ultrassonica para medida de concentracao de acido borico em meio liquido

    Energy Technology Data Exchange (ETDEWEB)

    Kohara, Richard Yuzo Ramida

    2015-06-01

    This dissertation is to analyze the viability of using ultrasonic technique to characterize the concentration of boric acid in liquid medium non-invasively, therefore, ultrasonic tests were performed relating different boric acid concentrations with the travel time of the ultrasonic wave, also were evaluated factors able to mask the characterization of these concentrations by ultrasonic technique. The results showed that the ultrasonic technique allows the characterization of boric acid concentrations in liquid medium in very simple terms by the ultrasonic wave travel time, requiring further studies in complex conditions. (author)

  15. Analysis of the sediments of the Julian Adame Alatorre dam by the INAA; Analisis de sedimentos de la presa Julian Adame Alatorre por la tecnica de AANI

    Energy Technology Data Exchange (ETDEWEB)

    Oliva, J.E.; Lugo, J.F.; Mireles, F.; Quirino, L.L.; Davila, J.I.; Pinedo, J.L.; Rios, C. [UAZ, Cipres 10, Fracc. La Penuela, 98068 Zacatecas (Mexico); Miller, W.H. [Nuclear Science and Engineering Institute, E2433 Engineering Building East, University of Missouri-Columbia, MO 65211 (United States)]. e-mail: jeolivag@yahoo.com.mx

    2003-07-01

    Its were taken eight samples of sediment of the Julian Adame Alatorre dam located in the Villanueva municipality, in the State of Zacatecas, Mexico; with the end of determining the presence of elements of anthropogenic origin, as well as the concentration of the same ones. It was used the Instrumental neutron activation analysis (AANI) with a flow of thermal neutrons of 8 x 10{sup 13} and 5 x 10{sup 13} n cm{sup -2} s{sup -1}. With the purpose of determining the concentration of these elements at level of traces; finding presence of 32 elements among which its were find elements in greater concentrations and others at level of traces. Of these 32 elements, five of anthropogenic origin were identified which its were: Cr, Co, Zn, As and Mn; but that whose concentration is very low, in comparison with the one reported in other places of the world. In this work there are presented the obtained results of the elementary analysis of this samples. (Author)

  16. Experimental study of natural two-phase flow circulation using a visualization technique; Estudo experimental da circulacao natural bifasica utilizando uma tecnica de visualizacao

    Energy Technology Data Exchange (ETDEWEB)

    Vinhas, Pedro A.M., E-mail: Pedro_mvinhas@poli.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Nuclear; Faccini, Jose L.H., E-mail: faccini@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Su, Jian, E-mail: sujian@lasme.coppe.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2013-07-01

    This paper presents an experimental study of natural two-phase flow in a circuit that simulates, on a smaller scale, a typical residual heat removal system of passive reactors APWR (Advanced Pressurized Water Reactor). The circuit was formed by a heater, a heat exchanger and piping. The experimental study was the application of a visualization technique, using a high speed camera, for measuring the size and speed of vapor bubbles generated in the heater with different power heating. The camera was positioned in the central region of the pipe connecting the heater to the heat exchanger, where there is a clear passage. The flow of images were processed and analyzed using commercial software that allowed the determination of the length and velocity of the bubbles. The results were then compared with correlations available in literature.

  17. Implementation of leak detection techniques in ducts with critical regimen multiphase flow; Implementacao de tecnicas de deteccao de vazamentos em dutos em regime de escoamento multifasico critico

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Rodrigo S.; Maitelli, Andr L.; Doria Neto, Adriao D.; Salazar, Andres O. [Rio Grande do Norte Univ., Natal, RN (Brazil)

    2005-07-01

    This paper presents signals processing techniques and artificial neural networks to identify leaks in multiphase flow pipeline. The greatest difficulty on traditional methods of leak detection (volume balance, pressure point analysis, etc) is that they are insufficient to design an adequate profile for the real conditions of oil pipeline transport. These difficult conditions goes since unevenly soil, that cause columns or vacuum throughout pipelines, until the presence of multi phases like water, gas and oil; plus other components as sand, which use to produce discontinuous flow off and diverse variations. To attenuate these difficulties, the transform wavelet was used to map the signal pressure in different resolution plan allowing the extraction of descriptors that identify leaks patterns and with then to provide training for the neural network multilayer perceptron (MLP) to learning of how to classify this pattern and report whenever this characterize leaks. During the tests were used transient and regime signals and pipelines with punctures with size variations from 1/2'' to 1'' of diameter to simulate leaks and, this way, it was possible to detect leaks with a time window of two minutes. The result show that the proposed descriptors considered, based in statistical methods applied in domain transform, are sufficient to identify leaks patterns and make it possible to train the neural classifier to indicate the occurrence of pipeline leaks. (author)

  18. Detection of breast cancer using advanced techniques of data mining with neural networks; Deteccion de cancer de mama usando tecnicas avanzadas de mineria de datos con redes neuronales

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz M, J. A.; Celaya P, J. M.; Martinez B, M. R.; Solis S, L. O.; Castaneda M, R.; Garza V, I.; Martinez F, M.; Lopez H, Y.; Ortiz R, J. M. [Universidad Autonoma de Zacatecas, Av. Ramon Lopez Velarde 801, Col. Centro, 98000 Zacatecas, Zac. (Mexico)

    2016-10-15

    The breast cancer is one of the biggest health problems worldwide, is the most diagnosed cancer in women and prevention seems impossible since its cause is unknown, due to this; the early detection has a key role in the patient prognosis. In developing countries such as Mexico, where access to specialized health services is minimal, the regular clinical review is infrequent and there are not enough radiologists; the most common form of detection of breast cancer is through self-exploration, but this is only detected in later stages, when is already palpable. For these reasons, the objective of the present work is the creation of a system of computer assisted diagnosis (CAD x) using information analysis techniques such as data mining and advanced techniques of artificial intelligence, seeking to offer a previous medical diagnosis or a second opinion, as if it was a second radiologist in order to reduce the rate of mortality from breast cancer. In this paper, advances in the design of computational algorithms using computer vision techniques for the extraction of features derived from mammograms are presented. Using data mining techniques of data mining is possible to identify patients with a high risk of breast cancer. With the information obtained from the mammography analysis, the objective in the next stage will be to establish a methodology for the generation of imaging bio-markers to establish a breast cancer risk index for Mexican patients. In this first stage we present results of the classification of patients with high and low risk of suffering from breast cancer using neural networks. (Author)

  19. Techniques for the microbial community study in wastewater systems; Tecnicas utilizadas en el estudio de la comunidad microbiologica en sistemas de depuracion

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Gonzalez, M. C.; Fdez-Polanco, F.; Garcia Encina, P. A. [Universidad de Valladolid (Spain); Becares Mantecon, E. [Universidad de Leon (Spain)

    2003-07-01

    Activated sludge is community by an heterogenic organisms community, such as protozoa, metazoa, alga fungus and bacteria. Among these organisms bacteria are very important due to their rule in the nutrient (phosphate and nitrogen) and organic matter removal. so is important the study and knowledge of them, in order to understand how the wastewater systems works. To achieve this studies is necessary the characterization of the diverse bacterial groups (nitrifies, sulfate reducing, methanogenics etc.), thus it is essential the application of a rapid, reliable and precise method, like the molecular techniques that are commonly used in the wastewater studies. Among these techniques are F. I. S. H. (Florescence In Situ Hybridization). (Author) 27 refs.

  20. Applicability of the Mercury Controlled Volatilization Technique in the Cerco Minero de Almadenejos; Aplicabilidad de Tecnicas de Volatilizacion Controlada de Mercurio en el Cerco Minero de Almadenejos

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, L; Sierra, M J; Millan, R

    2013-02-01

    This work study the case of the Cerco Minero de Almadenejos (Ciudad Real), that is an important archaeological mine site in the region. In this place, different contamination levels can be finding in the soil and installations. The recovery of this site it will be of interest for the socio-economic development of the area. A preliminary study of the site has been carried out, in order to evaluate the possibility of the application of an in situ controlled mercury volatilization process as an alternative remediation technique. In case of reaching the established legal mercury levels, it could be possible to change the land use of the site. The proposed methodology includes the possibility of control the time required for a complete treatment as a function of the initial contamination level, in this way, the soil and installations decontamination process is performed by a non-destructive way. Finally, the proposed technology respects the old metallurgical plant where cinnabar was treated and burned, having the furnaces an elevated historical value whose restoration and conservation is important for the future use of the site. (Author) 20 refs.

  1. Dosimetry for computed tomography using Fricke gel dosimetry and magnetic resonance imaging; Dosimetria em tomografia computadorizada empregando dosimetro Fricke gel e a tecnica de imageamento por ressonancia magnetica

    Energy Technology Data Exchange (ETDEWEB)

    Capeleti, Felipe Favaro; Campos, Leticia L., E-mail: felipe@gmpbrasil.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-04-15

    In this work it was determined a new method for the determination of absorbed doses in Computed Tomography (CT) examinations using Fricke gel dosimetry developed at IPEN. Absorbed doses were determined by different methods of analysis, such as optical absorption spectrometry, ionization chambers and magnetic resonance imaging. Lower limit of sensitivity of the Fricke gel solution, the solution repeatability signal Fricke gel and CT equipment, detection sensitivity, among other tests were performed. Different equipment of computed tomography with multiple detectors were used. The Fricke gel solution showed better repeatability than ±5.5% using the technique of optical absorption spectrophotometry and computed tomography equipment showed repeatability better than ±0.2%. The Fricke gel solution features an easy and relatively quick preparation, but it is necessary to be careful not to contaminate and lose the solution. With the results, it was confirmed the application of this type of dosimetry for computed tomography equipment. (author)

  2. Detection of microorganisms in culture medium through the neutron radiographic technique; Deteccao de microorganismos em meios de cultura pela tecnica de neutrongrafia

    Energy Technology Data Exchange (ETDEWEB)

    Wacha, Reinaldo

    1999-05-01

    The study aims to obtain a more effective and faster method for the detection of bacteria in several culture media, such as potable water and blood. After the process growth in the culture medium, separation and suspension in buffer solution based in boron, the bacteria are deposited in track detectors that are submitted to thermal neutron beams (neutron flux: 2,2 x 10{sup 5} n.cm{sup -2}.s{sup -1}), resulting from the channel J-9 of the Argonauta research reactor, from the Nuclear Engineering Institute, IEN/CNEN. The latent tracks arisen from the alpha particles proceeding from the reaction B ({eta}, {alpha}) Li and, after having been revealed, are analyzed by an optical microscope that allows to detect the existence of the bacteria. Afterwards, they were analyzed in a nanoscope which helps the identification of the tracks of the alpha particles. (author)

  3. Technique applied in the evaluation of the UFCC reactor at Refinaria Alberto Pasqualini (REFAP), PETROBRAS; Tecnicas utilizadas na avaliacao do reator da UFCC da REFAP

    Energy Technology Data Exchange (ETDEWEB)

    Cascaes, Ronesio da Silva [PETROBRAS (Brazil) Refinaria Alberto Pasqualini

    1994-01-01

    Main problems found in the maintenance of the Fluidized Catalytic Cracking (FCC) unity, searches of metal alteration properties, metallographic evaluations, failures and micro-structures alterations are presented. Micrographic analysis of the structural samples, the methodology to detect the failures and physical and chemical essays utilized in the inspection are also reported 13 refs., 64 figs., 1 tab.

  4. Reduce of adherence problems in galvanised processes through data mining techniques; Reducciond e problemas de adherencia en procesos de galvanizado mediante tecnicas de mineria de datos

    Energy Technology Data Exchange (ETDEWEB)

    Martinez de Pison, F. J.; Ordieres, J.; Pernia, A.; Alba, F.; Torre, V.

    2007-07-01

    This paper presents an example of the application of data mining techniques to obtain hidden knowledge from the historical data of a hot dip galvanizing process and to establish rules to improve quality in the final product and to reduce errors in the process. For this purpose, the tuning records of a hot dip galvanizing line where coils with adherence problems in the zinc coating had been identified were used as starting point. From the database of the process, the classical data mining approach was applied to obtain and analyze a number of decision trees hat classified two types of coils, i.e. those with the right adherence and those with irregular adherence. The variables and values that might have influenced the quality of the coating were extracted from these tress. Several rules that may be applied to reduce the number of faulty coils with adherence problems were also established. (Author) 24 refs.

  5. Incrustations detection system for petroleum transport pipes based on gamma transmission; Sistema de deteccao de incrustacoes em dutos de transporte de petroleo pela tecnica de transmissao gama

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Milton

    2014-07-01

    The scale formed over the inner walls of the ducts conveying the extracted product from offshore oil wheels is a major cause of losses to companies and in some cases even the safety is affected. The consequence of such fouling is the duct's square section reduction that causes extraction flow decrease and can also cause an increase in pressure inside the wheel, with serious consequences for safety. The objective of this work is to propose a mobile inspection system, which can be transported by underwater robots to inspect the lines of ducts in the outputs of the oil wheels. The measurement method to be adopted will be the gamma rays' beam attenuation at a predetermined position of the pipe. This transmission value compared to a clear pipe reading will show if the thickness of the inlay is larger or smaller than an assumed thickness. To carry out the measurements it was designed and built an electronic system comprising power supply, amplifier, single channel analyzer and a counter timer that was connected to a CsI scintillator detector coupled to a PIN photodiode. The system was set up to perform measurements with constant accuracy of ±1%. Tests during the study demonstrated the effectiveness of the proposed method with the obtained results with a carbon steel duct section of 270 mm diameter, removed from the field, with asymmetric BaSO4 inlay. (author)

  6. Alternative techniques to monitoring the corrosive potential for fluids in submarine pipelines; Tecnicas alternativas para monitorar o potencial corrosivo de fluidos transportados em oleodutos submarinos

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Cynthia de Azevedo; Brito, Rosane Fernandes de; Paiva, Eva M. de O. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Tecnologia de Materiais, Equipamentos e Corrosao; Freitas, Nair Domingues de; Salvador, Angelica Dias [PETROBRAS, Macae, RJ (Brazil). Unidade de Negocios da Bacia de Campos

    2003-07-01

    PETROBRAS in search of being a benchmark in safety, environment and health, established in July 2001 a work group to elaborate a standard for Pipeline Integrity Management. This standard set the requirements for Pipeline Integrity Management and establishes, among others criteria, the actions required to detect, monitor and control internal corrosion of pipelines. The first step to evaluate, monitor and control the internal corrosion is to define the corrosive potential of transported fluids. Some oil pipelines located in central and southern areas of the Campos Basin transport high water cut produced fluids (> 30%) and with demulsifiers, which allow oil and water separation and increase internal corrosion risks. Despite of these, it is not possible to check the internal corrosion rates using conventional techniques because the fluids are produced through sub-sea 'manifolds'. In order to investigate the possibility of corrosion inhibition by crude oils, laboratory tests were performed simulating real field conditions in terms of fluid compositions, water cut and temperature. Experiments were conducted to determine the corrosion rate of specimens, the emulsion stability and the initial temperature of wax precipitation. This paper presents the results of the study realized to define the fluids' corrosive potential of four Campos Basin platforms that are transported through sub-sea 'manifolds. (author)

  7. Minimization of odors in water treatment plants by confinement techniques; Minimizacion de olores en plantas de tratamiento de aguas residuales mediante tecnicas de contencion/confinamiento

    Energy Technology Data Exchange (ETDEWEB)

    Santa Coloma, O.

    1999-07-01

    The demand for odour reducing measures (prevention and cleaning) in combination with treatment of wastewater is expected to increase steadily in the next future. Although many odour problems can be reduced through a rational mode of operations, odour emissions to the environment from various types of unit operations at treatment plants and from the sewer system will inevitable take place. (Author) 5 refs.

  8. Respirometric techniques description and its utilisation in wastewater treatment plants; Descripcion e implementacion de las tecnicas respirometricas en el tratamiento de las aguas residuales

    Energy Technology Data Exchange (ETDEWEB)

    Guisasola, A.; Baeza, J. A.; Carrera, J.

    2002-07-01

    The utilisation of respirometric techniques at laboratory level to characterise microbial aerobic consumption has grown considerably in the last decades because relevant information can be simply, sensitively and toughly obtained. Nowadays, the implementation of on-line respirometers as a part of the wastewater treatment control systems has become very important. This work takes in a revision of respirometric techniques from its biochemical principles to its industrial applications in wastewater treatment systems. (Author) 18 refs.

  9. Electrodialysis Treatment of Industrial Waste Waters That Generaters Little Sludge; Tratamiento de aguas residuales industriales por electrodialisis, tecnica que genera pocos lodos

    Energy Technology Data Exchange (ETDEWEB)

    Savastoma Mariel, C. [Universidad de Cantabria. Santander (Spain)

    2002-07-01

    Electrodialysis with bipolar membranes is reviewed as a separation technique and details are shown. The method is used in several process applications but its adoption looks particularly attractive in the treatment of waste water streams consisting primarily of diluted residual salts and electrolytes. It is argued that the main advantage shown by the technology compared to the classical treatment consisting of adding lime to neutralize the waste waters resides in tis avoiding the generation of voluminous sludges thus permitting savings in the management and disposal of the mud. Other interesting applications are those operations where generating acidity and/or alkalinity with addition of no extra chemicals is desirable, such as the regeneration of ion exchange resins. (Author) 34 refs.

  10. Models of signal validation using artificial intelligence techniques applied to a nuclear reactor; Modelos de validacao de sinal utilizando tecnicas de inteligencia artificial aplicados a um reator nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Mauro V. [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil); Schirru, Roberto [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    2000-07-01

    This work presents two models of signal validation in which the analytical redundancy of the monitored signals from a nuclear plant is made by neural networks. In one model the analytical redundancy is made by only one neural network while in the other it is done by several neural networks, each one working in a specific part of the entire operation region of the plant. Four cluster techniques were tested to separate the entire operation region in several specific regions. An additional information of systems' reliability is supplied by a fuzzy inference system. The models were implemented in C language and tested with signals acquired from Angra I nuclear power plant, from its start to 100% of power. (author)

  11. Tensometry technique for X-ray diffraction in applied analysis of welding; Tensometria por tecnica de difracao de raios X aplicada na analise de soldagens

    Energy Technology Data Exchange (ETDEWEB)

    Turibus, S.N.; Caldas, F.C.M.; Miranda, D.M.; Monine, V.I.; Assis, J.T., E-mail: snturibus@iprj.uerj.b [Universidade do Estado do Rio de Janeiro (IPRJ/UERJ), Nova Friburgo, RJ (Brazil). Inst. Politecnico

    2010-07-01

    This paper presents the analysis of residual stress introduced in welding process. As the stress in a material can induce damages, it is necessary to have a method to identify this residual stress state. For this it was used the non-destructive X-ray diffraction technique to analyze two plates from A36 steel jointed by metal inert gas (MIG) welding. The stress measurements were made by the sin{sup 2{psi}} method in weld region of steel plates including analysis of longitudinal and transverse residual stresses in fusion zone, heat affected zone (HAZ) and base metal. To determine the stress distribution along the depth of the welded material it was used removing of superficial layers made by electropolishing. (author)

  12. Radiological protection in the interventional techniques: experience in the Pain Clinic of the CIMEQ; Proteccion radiologica en las tecnicas intervencionistas: experiencia en la Clinica del Dolor del CIMEQ

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero C, M. C.; Benitez N, P. P.; Gonzalez G, Y. [Centro de Investigaciones Medico Quirurgicas, Av. 216 Esq. 11B, Playa Siboney, 6096 La Habana (Cuba); Martinez G, A.; Gonzalez R, N. [Centro de Proteccion e Higiene de las Radiaciones, Carretera de la Cantera, Victoria II, Km. 21.5 Guanabacoa, La Habana (Cuba); Sanchez Z, L. R., E-mail: mayka@infomed.sld.cu [Hospital C. Q. Hermanos Ameijeiras, San Lazaro 701, Centro Habana, La Habana (Cuba)

    2014-08-15

    The Pain Clinic of the CIMEQ offers treatment to patients with different pathologies, using interventional techniques as the radiology like visual guide to reach the target structure and to apply the election technique. The personnel that carry out these procedures are inserted in the program of radiological surveillance of the institution, reason for which a radiological event could be detected where the main physician responsible of the service was implied. In this work the results of an investigation are presented realized with the objective of to know the causes of the event and to determine the necessary measures to avoid that this repeats again. The investigation was oriented to three fundamental aspects: medical exam of the affected worker; evaluation of the operational procedures from the radiological protection view point; and dosimetric measurements simulating the real conditions of work for which were used ionization chamber, radiometer and PMMA mannequin. As a result of the medical exam was detected that the main physician of the service did not use during the execution of all the procedures the extremities dosimetry and that he presented a radio induced erythema in the right hand, reason for which he was separated of the activity with ionizing radiations, until the conclusion of the investigation. With relationship to the evaluation of the operational procedures from the radiological protection view point, was verified that the medical physician not carried out any collimation of the beam and he was located in the positions where the dose rate reached the maximum values, frequently introducing the hands in the direct beam; that which implied an overexposure of the superior extremities and a not optimized exposure for whole body. This result was proven with the realized experimental measurements, which gave dose estimated values in extremities of the order of the deterministic effects. The investigation facilitated to introduce modifications in the operational procedures from the radiological protection view point that allowed optimizing the occupational exposure and to avoid the appearance of deterministic effects on the workers of this practice. Parallel was carried out the completion of the protection individual media and working media that allowed the proper application of the mentioned procedures were substituted. On the other hand, this investigation pointed to that the personnel training in radiological protection matter and the control of the occupational exposure in the interventional techniques are indispensable for the safe performance of the medical practice. (author)

  13. Stratospheric gravity wave activities inferred through the GPS radio occultation technique; Ondas de gravidade na estratosfera terrestre inferida atraves da tecnica de radio ocultacao de GPS

    Energy Technology Data Exchange (ETDEWEB)

    Wrasse, Cristiano Max [Universidade do Vale do Paraiba (UNIVAP), Instituto de Pesquisa e Desenvolvimento (IPeD), Sao Jose dos Campos, SP (Brazil); Takahashi, Hisao; Fechine, Joaquim; Denardini, Clezio Marcos [Instituto Nacional de Pesquisas Espaciais (INPE), Sao Jose dos Campos, SP (Brazil); Wickert, Jens, E-mail: cmw@univap.br, E-mail: hisaotak@laser.inpe.br, E-mail: joaquim@laser.inpe.br, E-mail: denardin@dae.inpe.br, E-mail: jens.wickert@gfz-potsdam.de [GeoForschungsZentrum, Potsdam (GFZ), Department of Geodesy and Remote Sensing (Germany)

    2007-07-01

    Stratospheric gravity wave activities were deduced from GPS radio occultation temperature profiles obtained by CHAMP satellite between 2001 and 2005. Potential energy profiles are used to analyze the gravity wave activity over South America. The results showed an inter-annual variation of the potential energy integrated between 24 and 34 km of altitude. The gravity wave activity is more concentrated around the equatorial region. In order to evaluate the seasonal variation of the gravity wave activity, a mean potential energy was determined over (10 deg N-10 deg S) and (100 deg W-20 deg W). The results showed a lower gravity wave activity during winter time, while during spring time the mean potential energy showed an increase in the wave activity. The results of the mean potential energy also showed that the gravity wave activity in the lower stratosphere exhibits a higher wave activity during 2002 and 2004 and a lower wave activity during 2003 and 2005. (author)

  14. Use of Monte Carlo Methods for determination of isodose curves in brachytherapy; Uso de tecnicas Monte Carlo para determinacao de curvas de isodose em braquiterapia

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Jose Wilson

    2001-08-01

    Brachytherapy is a special form of cancer treatment in which the radioactive source is very close to or inside the tumor with the objective of causing the necrosis of the cancerous tissue. The intensity of cell response to the radiation varies according to the tissue type and degree of differentiation. Since the malign cells are less differentiated than the normal ones, they are more sensitive to the radiation. This is the basis for radiotherapy techniques. Institutes that work with the application of high dose rates use sophisticated computer programs to calculate the necessary dose to achieve the necrosis of the tumor and the same time, minimizing the irradiation of tissues and organs of the neighborhood. With knowledge the characteristics of the source and the tumor, it is possible to trace isodose curves with the necessary information for planning the brachytherapy in patients. The objective of this work is, using Monte Carlo techniques, to develop a computer program - the ISODOSE - which allows to determine isodose curves in turn of linear radioactive sources used in brachytherapy. The development of ISODOSE is important because the available commercial programs, in general, are very expensive and practically inaccessible to small clinics. The use of Monte Carlo techniques is viable because they avoid problems inherent to analytic solutions as, for instance , the integration of functions with singularities in its domain. The results of ISODOSE were compared with similar data found in the literature and also with those obtained at the institutes of radiotherapy of the 'Hospital do Cancer do Recife' and of the 'Hospital Portugues do Recife'. ISODOSE presented good performance, mainly, due to the Monte Carlo techniques, that allowed a quite detailed drawing of the isodose curves in turn of linear sources. (author)

  15. The use of environmental monitoring as a technique to identify isotopic enrichment activities; O uso da monitoracao ambiental como tecnica de identificacao de atividades de enriquecimento isotopico

    Energy Technology Data Exchange (ETDEWEB)

    Buchmann, Jose Henrique

    2000-07-01

    The use of environmental monitoring as a technique to identify activities related to the nuclear fuel cycle has been proposed, by international organizations, as an additional measure to the safeguards agreements in force. The elements specific for each kind of nuclear activity, or nuclear signatures, inserted in the ecosystem by several transfer paths, can be intercepted with better or worse ability by different live organisms. Depending on the kind of signature of interest, the anthropogenic material identification and quantification require the choice of adequate biologic indicators and, mainly, the use of sophisticated techniques associated with elaborate sample treatments. This work demonstrates the technical viability of using pine needles as bioindicators of nuclear signatures associated with uranium enrichment activities. Additionally, it proposes the use of a technique widely diffused nowadays in the scientific community, the High Resolution Inductively Coupled Plasma Mass Spectrometer (HR-ICP-MS), to identify the signature corresponding to that kind of activities in the ecosystem. It can be also found a description of a methodology recently being applied in analytical chemistry,based on uncertainties estimates metrological concepts, used to calculate the uncertainties associated with the obtained measurement results. Nitric acid solutions with a concentration of 0.3 mol.kg{sup -1}, used to wash pine needles sampled near facilities that manipulate enriched uranium and containing only 0.1 {mu}g.kg{sup -1} of uranium, exhibit a {sup 235} U: {sup 238} U isotopic abundance ratio of 0.0092{+-}0.0002, while solutions originated from samples collected at places located more than 200 km far from activities related to the nuclear fuel cycle exhibit a value of 0.0074{+-}0.0002 for this abundance ratio. Similar results were obtained for samples collected in different places permit to confirm the presence of anthropogenic uranium and demonstrate the viability of using this technique and the methodology proposed in this work. (author)

  16. Development in technology and medical physics in radiotherapy: special considerations hadron therapy; Evolucion de la tecnica y de la fisica medica en radioterapia: consideraciones especiales sobre hadronterapia

    Energy Technology Data Exchange (ETDEWEB)

    Mazai, A.; Losa, S.; Farias, R.; Cell, J. c.; Perez, J.; Olivera, G.; Galmarini, D.; Prezado, Y.; Faus-Golfe, A.; Sanchez Parcerisa, D.; Carbe, A.; Venencia, D.; Andreo, P.; Fourquet, A.

    2016-08-01

    This work presents some recent advances in technology and medical physics in the field of radiation oncology. If stands out the progress in anatomical and functional imaging, the availability of beams of photons and charged particles with multiples incidences on the patient, the conformal and monitoring device, as well as the software to calculate and to control the treatments. There is a description of concepts such as intensity modulation, image guided and adaptive radiation therapy, transit dosimetry, hadron therapy and the importance of research in radiation biology, including practical examples. It concludes with the need to evaluate the clinical relevance and the economical aspects of all this advances, as well as how to apply them to get personalized treatments in combination with molecular biology and to spread these benefits to large populations. (Author)

  17. Application of diagnosis and monitoring area contaminated by petroleum derivatives; Aplicacao da tecnica de caminhamento eletrico em area contaminada por derivados de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Cesar Augusto [Pos-graduacao em Geociencias em Meio Ambiente, IGCE - UNESP, Rio Claro, SP (Brazil)], E-mail: cesargeologia@yahoo.com.br; Dourado, Joao Carlos; Braga, Antonio Celso de Oliveira [Dept. de Geologia Aplicada, IGCE - UNESP, Rio Claro, SP (Brazil)], E-mails: jdourado@rc.unesp.br, acobraga@rc.unesp.br

    2006-07-15

    Geophysical methods are useful technic of geological investigation, thoroughly employed to diagnosis and monitoring contaminated areas, in conjunction with direct techniques of investigation such as chemical analyses. Among these, electric resistivity is more usually used in studies of contaminants in soil and groundwater, due to the high contrast of electric properties between the soil and the pollutant types frequently found, essentially constituted of composed organic and inorganic. Geophysical studies in impacted areas by petroleum products may be describe by anomalies of both low resistivity and high resistivities, confirmed as contaminant by chemical analyses. This apparent contradiction can reflect processes of degradation of the contaminants, directly associated with its residence time in the soil, through the generation of by-products that change the physical properties of the soil and groundwater, principally for the mineral dissolution by action of organic acids and by formation of minerals of oxides and hydroxides minerals. Natural attenuation defines a series of physical, chemical and biological processes that allow the degradation, dispersion and dilution of contaminants in a natural form, in other words, free from human intervention. This paper presents the application of electrical profiling technique in a contaminated industrial area for benzene, toluene, xylene, 1,2 dichloroethene and inorganic salts and it discusses the physical alterations of the contaminated soil through the obtained results, under the optics of the Natural Attenuation in course in the area of study. (author)

  18. Techniques Used in the Application of a {sup 14}C-Labelled Herbicide; Tecnicas Utilizadas en la Aplicacion de un Herbicida Marcado con {sup 14}C

    Energy Technology Data Exchange (ETDEWEB)

    Costa, J. J.; Ghelfi, R. A.; Brenzoni, E. O. [Facultad de Agronomia y Veterinaria (Centro de Radiobiologia) Comision Nacional de Energia Atomica, Buenos Aires (Argentina)

    1966-05-15

    The butylic ester of 2.4-D-2{sup 14}C was used to apply the herbicide in the chemical form adopted for field spraying. Esterification of the acid was carried out in the Labelled Molecules Division of the National Atomic Energy Commission's Department of Scientific Research. For purposes of the experiment the ester was prepared in the form of two emulsions of different concentrations ('concentrated' and 'dilute'), the first being based on the average amount used in field application in Argentina. The remaining components of the emulsions, i.e. the emulsifier and the solvent, were these normally used in Argentina, since in this country the import of herbicides based on 2,4-D is not permitted. The tests were carried out on specimens of quinoa (Chenopodium spp.), Datura ferox and Cyperus (Cyperus rotundus), kept in greenhouses. The duration of the treatment was three days in all cases except in that of Cyperus, where it was twelve days. The distribution of the radioisotope in the plants following application of the labelled substance was always limited, as was shown by the autoradiographs. All the doses used proved to be suitable for obtaining autoradiographs, including the lowest dose, containing 0.118 {mu}Ci of activity in the least of the volumes used (10 A). Quantitative determination of the percentage of the dose (amount of radioactivity) localized in a quinoa plant gave a figure of 16.3%. (author)

  19. Development of method to chemical separation of gallium-67 by thermal diffusion technique; Desenvolvimento de metodo para separacao quimica de galio-67 pela tecnica de difusao termica

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Patricia de Andrade

    2012-07-01

    Radioisotopes of gallium have been studied and evaluated for medical applications since 1949. Over the past 50 years {sup 67}Ga has been widely used in the diagnosis of various diseases, including acute and chronic inflammatory lesions, bacterial or sterile and several types of tumors. In Brazil 30% of clinics that provide services for Nuclear Medicine use {sup 67}Ga citrate and the demand for 67{sup G}a at IPEN-CNEN/SP is 37 GBq (1 Ci)/week. The {sup 67}Ga presents physical half-life of 3.26 days (78 hours) and decays 100% by electron capture to stable {sup 67}Zn. Its decay includes the emission of {gamma} rays with energies of 93.3 keV (37%), 184.6 keV (20.4%), 300.2 keV (16.6%) and 888 keV (26%). In the past {sup 67}Ga was produced by the reaction {sup 68}Zn (p, 2n) {sup 67}Ga at IPEN-CNEN/SP. After irradiation, the target was dissolved in concentrated HCl and the solution percolated through a cationic resin DOWEX 50W-X8, 200-400 mesh, conditioned with 10 mol L{sup -1} HCl. Zinc, nickel and copper were eluted in 10 mol L{sup -1} HCl and {sup 67}Ga 3.5 mol L{sup -1} HCl. The final product was obtained as {sup 67}Ga citrate. This work presents a new, fast, direct and efficient method for the chemical separation of 67{sup G}a by thermal diffusion (heating of the target) combined with concentrated acetic acid extraction. Purification was performed by ion exchange chromatography. Natural zinc electrodeposition was performed on nickel/copper plates as substrate and the zinc deposits were adherent to the substrate, slightly shiny and uniform. The targets were irradiated with 26 MeV protons and integrated current of 10 {mu}A.h. After irradiation, the targets were heated at 300 deg C for 2 hours and placed in contact with concentrated acetic acid for 1 hour. The average yield of extraction of {sup 67}Ga was (72 {+-} 10)%. This solution was evaporated and the residue was taken up in 0.5 mol L{sup -1} NH{sub 4}OH. The 67{sup G}a was purified on cationic resin Dowex 50WX8 in NH{sub 4}OH medium. The {sup 67}Ga recovery was (98 {+-} 2)%. This solution was evaporated and taken up in 0.1 mol L{sup -1} HCl. The chemical purity was evaluated by ICP-OES that resulted in (2 {+-} 1) {mu}g mL{sup -1} of zinc. The concentration of iron, copper and nickel was lower than the detection limits and also than the utilization limits for {sup 67}Ga. The radionuclidic purity was greater than (99.9%). This method showed to be suitable to obtain high purity {sup 67}Ga in less aggressive chemical conditions than before. (author)

  20. Technique of radiotherapeutic treatment of breast cancer with scarcity means; Tecnica de tratamiento radioterapico del cancer de mama con escasez de medios

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez M, S.; Carrera M, F.; Bayo L, E.; Gutierrez B, L.; Gomez-Millan B, J. [Hospital Juan Ramon Jimenez, Ronda Norte s/n, 21005 Huelva (Spain)

    1998-12-31

    The objective of this work is to show the particularities in the treatment simulation localization, in the volume selection and in the main planning strategies motive by our scarcity means during the first year of performance. It was utilized a computerized tomograph, an X-ray equipment with tele commanded table. Also it was utilized a radio opaque lattice of marked center and knowing space and also a magnetic pointer for indicating 80 cm length between focus-skin. Putting the patient on an inclined plane of self design and manufacture, it was realized three cuts at different levels over what are limited the clinical target volume (CTV) and it is optimized the isocenter through its determined localization by equations. It was employed equations for the radiobiological prediction about fibrosis and dermatitis. It was utilized another techniques or procedures for planning such as personnel wedges or the dose equilibrium in three points of the breast. It was evaluated toxicities (EORTC-RTOG). The results were as follow: Acute dermatitis (grade 1: 23 %; grade 2: 59 %; grade 3: 18 %). Acute pneumonitis (grade 1: 4.3 %); acute pharyngitis (grade 1: 11 %; grade 2: 3.7 %. In conservator treatment of breast it was obtained excellent aesthetic results in 15 %; good 72 %; moderate 11 %; and bad 3 %. The good aesthetic results by the combined use of the optimization techniques in clinical dosimetry, personnel wedges, isocenter therapy and computerized planning in the radiotherapeutic treatment of the breast cancer. (Author)

  1. Image processing techniques to evaluate mammography screening quality; Tecnicas de processamento de imagem para avaliar a qualidade de exames de mamografia

    Energy Technology Data Exchange (ETDEWEB)

    Quintana, Clara; Tirao, German [Consejo Nacional de Investigaciones Cientificas y Tecnicas, Buenos Aires (Argentina); Valente, Mauro [Universidad Nacional de Cordoba (Argentina). Facultad de Matematica, Astronomia y Fisica

    2011-07-01

    Mammography imaging has proved to be the best noninvasive method for breast cancer diagnosis, but it requires that irradiation parameters are set within Protocols recommendations (minimal dose delivering). This work presents an investigation on mammography image formation by means of validated Monte Carlo simulations along with further image analysis and mathematical processing. Several image processing methods have been suitably introduced and investigated according to their capability for micro-calcification detection and quality evaluation. The obtained results suggest the feasibility of all the proposed methods. Furthermore, it was possible to characterize the reliability of each and to infer the corresponding advantages or disadvantages, obtaining an image quality evaluation as a function of several parameters configurations. (author)

  2. Influence of diagnostic quality scanning technique with CR mammography; Influencia de la tecnica de exploracion en la calidad diagnostica de la mamografia ocn CR

    Energy Technology Data Exchange (ETDEWEB)

    Rivas Ballarin, M. A.; Ruiz Manzano, P.; Ortega Pardina, P.; Laliena Bielsa, V.; Calvo Carrillo, S.; Garcia Romero, A.; Millan Cebrian, E.

    2013-07-01

    Image quality criteria laid down in the Spanish Protocol of Control of quality in Radiology (PECCR) to a team of mammography with CR imaging system are applied in this work and evaluated the dosimetry impact implied by the modification of the technique of exposure required for the fulfilment of those criteria. Is also analyzes the impact on the image quality of the new radiographic technique, evaluated by three radiologists. (Author)

  3. Methods and instrumental techniques for the study of acidic water systems; Metodologias y tecnicas instrumentales para el estudio de sistemas de aguas acidas

    Energy Technology Data Exchange (ETDEWEB)

    Acero Salazar, P.; Asta Andres, M. P.; Torrento Aguerri, C.; Gimeno Serrano, M. J.; Auque Sanz, L. F.; Gomez Jimenez, J. B.

    2011-07-01

    From a geochemical point of view acidic waters are very complex systems in which many interaction processes take place between surface and ground waters, gases (particularly atmospheric oxygen), acid-generating minerals, solid phases responsible for the natural attenuation of elements in solution and also many types of biological activity. Owing to this high complexity, the quality and reliability of any geochemical study focusing on this type of system will depend largely upon the use of appropriate methods of sampling, preservation and analysis of waters, minerals, gases and biological samples. We describe here the main methods and techniques used in geochemical studies of acid waters associated with sulphide mineral environments, taking into account not only the various sample types but also the features of the main types of system (open pits, tailings ponds, acid streams etc.). We also explain the main applications and limitations of each method or technique and provide references to earlier technical and scientific studies in which further information can be obtained. (Author) 97 refs.

  4. Experimental study of movements respiratory conditions acceptable in radiotherapy techniques advanced; Estudio experimental de las condiciones de movimiento respiratorio aceptables en tecnicas de radioterapia avanzada

    Energy Technology Data Exchange (ETDEWEB)

    Carrasco de Fez, P.; Ruiz Martinez, A.; Ruiz Martinez, A.; Jornet Sala, N.; Latorre Musoll, A.; Eudaldo Puell, T.; Ribas Morales, M.

    2015-07-01

    The aim is Determine experimentally in what conditions the movement of the PTV produces uncertainties unacceptable in the various stages of the treatment radiotherapy, from the acquisition of imagens 4D to the irradiation. (Author)

  5. Comparative study between two austenitic steels with the EPR (Electrochemical Potentiokinetic Reactivation) technique.; Estudio comparativo entre dos aceros austeniticos mediante la tecnica EPR (Reactivacion Electroquimica Potenciocinetica)

    Energy Technology Data Exchange (ETDEWEB)

    Guillen M, A N

    1997-09-01

    In the mid 19704s, the intergranular corrosion with stress corrosion cracking (IGSCC) have been identified as a greater problem in Boiling Water Reactors BWR in several places of the world. The Electrochemical Potentiokinetic Reactivation - Single Loop (EPR-SL) test and the Double Loop (EPR-DL) test, were developed as methods for measuring the Degree of Sensitization (DOS), show sensitised materials at subject to Intergranular Corrosion. In Mexico, the Laguna Verde4s reactor is BWR type and many of its principal components was built with AISI 304 stainless steels, while that in VVER reactors as well as Juragua4s reactor in Cuba is used 321 Stainless stell in its Russian equivalent designation 08Ch18N10T. In this work, were studied 304 and 08Ch18N10T stainless steels by means of EPR-SL, EPR-DL and ASTM A-262 techniques, they have been found a good correlation for 304 steel but not in 08Ch18N10T steel and was proposed one modification in the criterion by the evaluation on the sensitisation in this steels. Finally, both materials were welded with procedures used in the nuclear industry, by Slow Strain Rate Test (SSRT) to determine the Stress Corrosion Cracking SCC susceptibility, and subsequently the susceptibility to localized corrosion was studied by means of Cyclic Polarization test and the uniform corrosion rate in a solution with chlorides by the Tafel plot, Potentiodynamic Anodic Polarization Resistance. (Author).

  6. Aplicacion de nuevas tecnicas y procedimientos para la ensenanza de la lectura-escritura (Application of the New Techniques and Procedures for Teaching Reading-Writing).

    Science.gov (United States)

    Instituto Nacional de Pedagogia (Mexico).

    This document is an English-language abstract (approximately 1,500 words) of experiments performed in Mexico, D. F. by way of introducing new techniques for teaching reading and writing, particularly in the remedial classes. The first part of the document deals with a series of experiments carried out with first grade remedial groups as follows:…

  7. The result analysis by A-Frame technique in coating failure detection; Analise dos resultados do uso da tecnica A-Frame na localizacao de falhas no revestimento

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fabio Amarante; Leite, Daniele C.F. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Oliver, Joao Hipolito L. [TRANSPETRO - PETROBRAS Transportes, Rio de Janeiro, RJ (Brazil)

    2005-07-01

    This paper presents the method used to helps the on land pipeline integrity management, focusing on external corrosion control. The method is achieved by gathering together the data from an Over The Line Survey (OLS) and an In Line Inspection (ILI). As the corrosion occurs at a coating fault in a non-effective cathodic protection (cp) area, both coating and metal loss inspection data were employed in this method. The OLS is applied to pinpoint and graduate the coating faults in underground pipeline by using the Coating Attenuation / A-Frame (ACVG - Alternate Current Voltage Gradient) technic. The ILI is applied to measure the external metal loss (corrosion) by running a smart PIG tool. In some pipelines a huge number of coating fault can be found, but it doesn't mean that all of them must be repaired, so it is a need to identify the critical coating fault, so that the number of digging for coating repair can be drastically reduced. In the other way, as the smart PIG can provide data of corrosion in the pipe, the coating fault on a corroded area can be considered as a critical one. Together, those data may point the spot where the cathodic protection was not effective and the coating failure resulted in corrosion on the pipe. This method has been a helpful criterion to identify critical coating faults and reduce the overall repair cost, it can be also used to indirect evaluate the performance of cp system, since no corrosion indication on a coating fault area can be assumed that the CP is effective. (author)

  8. Study of the porosity of synthetic sandstones by nondestructive nuclear techniques; Estudo da porosidade de arenitos sinteticos por tecnicas nucleares nao destrutivas

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Leonardo Carmezini

    2008-07-01

    In this paper, nuclear techniques have been used to describe structural characteristics of ceramic samples. These samples were produced to serve as simulates of sandstones and their mainly component was silica (SiO{sub 2}). Three sets of these samples with different characteristics were analyzed with the gamma ray transmission and the X-ray microtomography. They had the function to describe parameters as porosity point to point and total average porosity, for the transmission case, and 2D sections average porosity, total average porosity and size porous distribution for microtomography, as well as to investigate possible irregularities in bulk sample. The experimental set up for the gamma ray transmission technique consisted of: a 2 x 2 crystal NaI(Tl) detector, an {sup 241}Am radioactive source (59.54 keV, 100 mCi), an automatic micrometric table for the sample XZ movement and standard gamma spectrometry electronics. Lead collimators with 2 mm diameter were placed on the source way out and on the detector entrance. The microtomographic measurements were done with a Skyscan system, model 1172, with a X-ray tube with 20-100 kV of voltage range and a CCD camera. Employing gamma ray transmission method was possible to obtain overall porosity values from 25.8 to 34.0 % and from 24.8 to 29.2 % for samples with parallelepiped and cylinder shape, respectively, for ceramic I set; from 58.5 to 61.0 % and from 57.1 to 61.7 % for the same geometric shape of ceramic II set. The samples analyzed by the microtomography achieved resolutions of 1.73 {mu}m, 0.64 {mu}m and 1.28 {mu}m for samples of ceramic set I, II and III, respectively. This methodology provided average total porosity values from 26.6 to 29.4 %, from 48.4 to 51.0 % and from 28.2 to 30.6 % to I, II and III ceramic sets, respectively. The porous size profiles of each ceramic sample were also measured. (author)

  9. Ceramic filters analysis for aluminium melting through microtomography technique; Analise de filtros ceramicos para fundicao de aluminio atraves da tecnica de microtomografia

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Henrique de Souza; Lopes, Ricardo Tadeu; Jesus, Edgar Francisco Oliveira de; Oliveira, Luis Fernando de [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Lab. de Instrumentacao Nuclear; Duhm, Rainer; Feiste, Karsten L.; Reichert, Christian; Reimche, Wilfried; Stegemann, Dieter [Universidade de Hannover (Germany). IKPH

    2000-07-01

    In this work a ceramic filters analysis is done through the microtomography for improvement of the aluminium melting process through the filter porosity control. Microtomography were obtained of ceramic filters with pore dimensions of 10, 20 and 30 ppi. The data were calculated by using an reconstruction algorithm for divergent beam implemented in the Nuclear Instrumentation Laboratory of COPPE/UFRJ and analysed through cells and windows separation according to the defined by Ray. For the analyses the Image Pro program were used where the cells have been detached by sphere inserted, adjusting by nine points, in the filter cavities. So, the size of the answer sphere were considered as the cell size. The windows were measured by straight lines secant to the window intersections.

  10. Il rilievo laser come tecnica di monitoraggio per i fenomeni di instabilità dei versanti degli edifici vulcanici : il caso dell'Isola di Stromboli

    Directory of Open Access Journals (Sweden)

    Maria Marsella

    2012-09-01

    ses based on the 2006 and 2009 Digital Surface Models (DSMs, generated from an Airborne Laser scanner on the Stromboli  Island  permitted  to  detect  active landslides and to extract additional information useful to hazard assessment and related mitigation actions.

  11. Integrating techniques for neutron dosimetry in Linac 18 MV; Integrando tecnicas para dosimetria de neutrones en un Linac de 18 MV

    Energy Technology Data Exchange (ETDEWEB)

    Ceron R, P. V.; Diaz G, J. A. I.; Rivera M, T. [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Av. Legaria 694, 11500 Mexico D. F. (Mexico); Paredes G, L. C. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Vega C, H. R. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico)

    2015-10-15

    In this paper thermoluminescent dosimetry, analytical techniques and Monte Carlo calculations were used to estimate the neutron dose equivalent in a radiotherapy room with a linear electron accelerator of 18 MV. The equivalent dose was measured at isocenter to 1.42 m of target and at the entrance of the labyrinth of the room of a Novalis Tx. The neutron detectors were constructed with pairs of thermoluminescent dosimeters TLD 600 ({sup 6}LiF: Mg, Ti) and TLD 700 ({sup 7}LiF: Mg, Ti) which are placed inside a paraffin sphere of 20 cm in diameter. These measurements enabled the calculation of equivalent dose in the gate and the source term, using the relationships contained in the NCRP-151. Through the models carried out with the code MCNPX the absorbed dose distribution with regard to depth in a paraffin phantom are included and the neutron spectrum produced by the head, taking into account the geometry and component materials. The results are in the order of neutron milli sievert by gray of X-rays (mSv/Gy x) which are in the same order as those found in other reports for different accelerators. (Author)

  12. Program of training and technical expertise in radiation protection for personnel of medical radiology; Programa de capacitacao e especializacao tecnica em protecao radiologica para profissionais em radiologia medica

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Sergio R. de, E-mail: oliveirasr@fiocruz.br [Fundacao Oswaldo Cruz (EPSJV/FIOCRUZ), Rio de Janeiro, RJ (Brazil). Escola Politecnica de Saude Joaquim Venancio

    2013-07-01

    This work aims to verify the actual conditions for the training of technicians in Radiology, in relation to the knowledge of radiation protection in the field of Medical Diagnostic Radiology. To evaluate the knowledge of professionals was prepared a questionnaire on the topic, having been answered by workers with varied experience. The questionnaire was divided into three parts, being the initial self-evaluation, followed by closed and open issues, all specific knowledge. With a total of 55 questionnaires answered, it was found that 85% of respondents consider themselves able to work in the area performing the function, but when questioned about the technical details regarding the exposure to ionizing radiation, it was found that only 15% of respondents had some knowledge about the subject. In relation to Radiological Protection, was found that little more than 10% of the respondents know about the subject. The results found in this survey outlined the creation of a technical specialization course in radiation protection, which is part of the permanent staff of course of the Polytechnical School of Health of FIOCRUZ, solving, partially, one of the problems pointed out today by health bodies, that is the lack of trained personnel.

  13. Study of technical and economic feasibility of a cogeneration system in the tertiary sector; Estudo de viabilidade tecnica-economica de um sistema de cogeracao no setor terciario

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Rodolffo Aquino de; Rocha, Carlos Roberto; Bortoni, Edson da Costa [Universidade Federal de Itajuba (EXCEN/UNIFEI), MG (Brazil). Centro de Excelencia em Eficiencia Energetica

    2008-07-01

    This study aims to examine the technical feasibility and financial cost for a cogeneration system in a company in the tertiary sector. For this, was studied the electromechanical and thermal characteristics of a shopping center, as well as the technologies associated with the proposed cogeneration system. From the modeling of electric and thermal loads it was determined the system of operation for the system and the possible surplus energy generated. For the analysis of economic viability compare operating costs without cogeneration and with the alternative of cogeneration chosen. Among the calculations are the costs of investment and operation of the system. Was encountered the attractiveness of a cogeneration system, which uses natural gas as fuel for alternative engines and, in turn, reject heat to the absorption chillers. The idealized cogeneration system was also evaluated positively with a view to qualification required for participation in policies to encourage the rational use of energy resources. (author)

  14. Optimized design of shields for diagnostic X rays with NCRP 147 technique; Diseno optimizado de blindajes para rayos X diagnostico con tecnica NCRP 147

    Energy Technology Data Exchange (ETDEWEB)

    Gama T, G. [Calidad XXI SA de CV, Zacatecas 67-007 Col. Roma, 06700 Mexico D.F. (Mexico)]. e-mail: cxxi@prodigy.net.mx

    2006-07-01

    A comparison among the design techniques of shielding for X-ray diagnostic rooms with the NCRP 49 (1976) report technique, AAPM 39 (1993) Y the one of the NCRP 147 (2005) technique. The designs correspond to a room of conventional X-rays, one of fluoroscopy, one of tomography Y one of mammography. In all the cases it demonstrates that the NCRP 49 technique overestimate the shieldings. The causes of the overestimation of the NCRP 49 can be attributed to: a) high values of the work charge that don't consider the spectral fluence of the photons that are present in each room, b) to the differences in the values of the kerma in air without attenuation for the dispersed primary radiation Y of leakage among both reports. (Author)

  15. Optimal restoration strategies based on heuristic techniques for electrical distribution networks; Estrategias de restablecimiento optimas basadas en tecnicas heuristicas para redes de distribucion electrica

    Energy Technology Data Exchange (ETDEWEB)

    Cruz Castrejon, J. A; Islas Perez, E; Espinosa Reza, A; Garcia Mendoza, R [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mails: adrian.cruz@iie.org.mx; eislas@iie.org.mx; aer@iie.org.mx; rgarcia@iie.org.mx

    2013-03-15

    In this paper we present a proposed solution to the problem of finding alternatives to reset faults in radial distribution networks power systems. This solution uses a deterministic method based on the definition of heuristics and whose main objectives are to improve execution time and solution quality. This search is based on the alternate repetition of two stages: a stage that attempts to reset the unconnected areas and other areas trying ballasting overloaded. [Spanish] En este articulo se presenta una propuesta de solucion al problema de busqueda de alternativas de restablecimiento para fallas en redes de distribucion radiales en sistemas electricos de potencia. Esta solucion utiliza un metodo deterministico basado en la definicion de heuristicas y cuyos objetivos principales son: mejorar el tiempo de ejecucion y calidad de la solucion. Esta busqueda se basa en la repeticion alternada de dos etapas: una etapa que intenta restablecer las areas desconectadas y otra que intenta deslastrar las areas sobrecargadas.

  16. Noise resistance applied to the study paints; Aplicacion de la tecnica de ruido electroquimico al estudio de pinturas comerciales de efecto barrera

    Energy Technology Data Exchange (ETDEWEB)

    Lanchas Garcia-Zarco, S.; Alfosin Perez, V.; Suarez Garcia, A.; Urrejola Madrinan, S.; Sanchez Bermudez, A.

    2015-03-30

    Electrochemical noise is one of the methods of analysis used to interpret the phenomenon of corrosion. It has a number of advantages over other methodology types including its simplicity, its low cost and the fact that it does not disturb the system. This methodology appears to be effective together with other techniques in metal-electrolyte systems. In this case the technique is applied on its own on commercial anti-corrosion paints for which no information is available from other techniques. The main result of this study reveals the effectiveness of the noise resistance parameter, which had already been tested in the lab, when it is used to explain how the paint system behaves in industry. (Author)

  17. Multielement determination in Cuban red mangrove samples using nuclear and related analytical techniques; Determinacion multielemental en muestras de mangles cubanos utilizando tecnicas analiticas nucleares y conexas

    Energy Technology Data Exchange (ETDEWEB)

    Estevez Alvarez, J R; Aguiar Lambert, D; Montero Alvarez, A; Pupo Gonzalez, I; Padilla Alvarez, R [Centro de Estudios Aplicados al Desarrollo Nuclear, La Habana (Cuba); Gonzalez Garcia, H; Ramirez Sasco, M [Centro de Ingenieria y Manejo Ambiental de Bahias y Costas, La Habana (Cuba)

    1999-12-31

    In the present work the contents of Al; K; Ca; Mn; Fe; Ni; Cu; Zn; Sr; Cd and Pb in red mangroves (Rhizophora mangle) from different Cuban regions are determined, using Energy Dispersive X-Ray Fluorescence (Emission-Transmission (Et) and I/C methods), Atomic Absorption Spectrophotometry (AAS), and Polarography (Anodic Stripping Voltametry method). Biological Certified Reference Materials (CRM) are employed for the tracing of the tracing of the curves of the relative I/C method and for the evaluation of the analytical results accuracy. The reliability of the results is also checked by statistical means. Standard deviations and the detection limits of each method are reported. Finally, the obtained values for the concentration of the different elements in each studied ecosystem are presented; a detailed discussion about their significance will be performed in a further paper.

  18. Quantification of rutile in anatase by means of X-ray diffraction technique; Cuantificacion de rutilo en anatasa por medio de la tecnica de difraccion

    Energy Technology Data Exchange (ETDEWEB)

    Macias B, L.R.; Palacios G, J.; Garcia C, R.M. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1999-07-01

    In this work, making use of the X-ray diffraction technique, it was determined the quantification of two phases which are mixed in a crystalline sample of rutile and anatase also it is indicated the method to proceed in its evaluation, so that in the end it will be had as result of a semi-quantitative analysis of the phases that are found in the sample. The conclusion is that this method performs in samples which are presented as powders and since the different parameters with which they must be fulfilled then this should not be called quantitative but semi-quantitative and it has a margin of error in its evaluation. (Author)

  19. Avaliação radiografica de duas tecnicas, para o registro da relação centrica em pacientes classe I de Angle

    OpenAIRE

    Guilherme da Gama Ramos

    2007-01-01

    Resumo: Este estudo teve como objetivo comparar, por meio de radiografias transcranianas (técnica Accurad), duas técnicas descritas na literatura para a obtenção da relação cêntrica e posição das cabeças da mandíbula nas fossas mandibulares. Uma delas, a manipulação bilateral descrita por DAWSON em 1974. A outra, um traçado gráfico dos movimentos mandibulares no plano horizontal, denominado por GYSI, em 1910, de arco gótico, obtido por meio de um dispositivo, chamado de registro intra-oral. F...

  20. Amplificador digital : projeto de um circuito integrado CMOS para condicionamento de sinais segundo a tecnica de quantização

    OpenAIRE

    Ricardo Maltione

    1994-01-01

    Resumo: O AMPLIFICADOR DIGITAL é um amplificador de tensões baseado na técnica de QUANTIZAÇÃO, que consiste essenciahnente de uma forma de processamento em amplitude, de sinais discretizados no tempo, baseado na operação programada de acumuladores analógicos. Na implementação clássica de amplificadores, utiliza-se comumente um amplificador operacional, em uma estrutura realimentada, onde o ganho é definido pela razão de dois resistores. Uma outra técnica utiliza capacitores chaveados, onde o...

  1. EARTH MICRO-COSMOS. A technique to evaluate the effect produce by pollutants; MICROCOSMOS TERRESTRE. Una tecnica para la evaluacion de los efectos producidos por los contaminantes

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Gimeno, B.; Sanchez Cabrero, B.; Varela Gonzalez, J.

    1987-07-01

    Chemical pollution is one of the risks of industrialization. Daily there emerge a great deal of chemical compounds and it is necessary to asses the risk they might suppose to the environmental and/or human health. Till recently, the toxicity tests of the chemicals or their transformation products, were carried out using individuals of a few species. This approach doesn't seem correct because it ignores the relations that are stablished at the ecosystem level. Microcosms pretend to be an adecuated tool for the ecotoxicologicals tests. This review presents two different parts: in the first one, we show the possible applications of microcosms, in the second one, we present the validation and evaluation of the soil core microcosm, following the works done by EPRI and EPA. It would be interesting to assess and validate the soil core microcosm using it with fumigation of atmospheric pollutant in controlled environment and subsequently compare the results obtained in the laboratory with those obtained in the field. We think that this approach, along with other, techniques, may be useful. (Author) 37 refs.

  2. Technical application of Fuzzy logic in the construction of an energy sustainability index; Aplicacao das tecnicas de logica fuzzi na construcao de um indice de sustentabilidade energetica

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Francisco Carlos B. dos; Carneiro, Alvaro Luiz Guimaraes [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Sao Paulo - SP (Brazil)], E-mails: fcarlos@usp.br, carneiro@ipen.br

    2010-11-15

    Aggregation tools database and subsequent interpretation are the most challenge in the area of sustainability This task becomes very complex due to correlation of topics that comprise the dimensions that form the basis of the concept of sustainable development. The technique known as Fuzzy Logic or Fuzzy Logic is a powerful tool to capture information on vacancies, which is often the only information available in the area of sustainability. (author)

  3. Orientaciones Tecnicas para el Mejoramiento de la Administracion Educacional--Necesidades, Posibilidades y Perspectivas (Technical Guidelines on the Improvement of Educational Administration--Needs, Possibilities, and Perspectives).

    Science.gov (United States)

    Valle, Victor M.

    The success of development programs in educational systems is dependent, to a large extent, on the quality and relevancy of their management. Many worthwhile, well conceived and planned educational reforms have failed due to poor management. Therefore, both ministries of education and international organizations of technical cooperation have…

  4. Avaliação de oxigenadores de sangue utilizando principios de transferencia de massa e tecnica de perda de carga

    OpenAIRE

    Luis Melchert Faber Schmutzler

    2004-01-01

    Resumo: Oxigenadores de sangue tipo de membrana são construídos para trocarem gases de respiração através de uma área de contato, a sua chamada área de troca. Devido a características do processo de fabricação, esta área pode softer variações. Neste trabalho procurou-se desenvolver métodos de avaliação da variação desta área, por meio da medição da transferência de massa e da perda de carga. A técnica utilizando transferência de massa gerou dois métodos de avaliação, um utilizando como fase l...

  5. Development of in vitro techniques for individual monitoring of {sup 32}P; Desenvolvimento de tecnicas in vitro para monitoracao individual de {sup 32}P

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, A.P.F.; Sousa, W.O.; Dantas, A.L.A.; Dantas, B.M., E-mail: adantas@ird.gov.br, E-mail: wander@ird.gov.br, E-mail: bmdantas@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Divisao de Dosimetria

    2016-07-01

    The {sup 32}P is used in the form of liquid unsealed sources in medical facilities, research and teaching, representing a risk of internal exposure in routine activities and in case of accidental incorporation. The evaluation of {sup 32}P incorporation can be accomplished through in vitro bioanalysis of urine. This paper aims to provide a methodology to analyze {sup 32}P in biological samples, applicable to internal individual monitoring using liquid scintillation technique. The minimum detectable activity of the system was determined and the sensitivity of the technique was evaluated, based on the detected minimum effective dose. (author)

  6. Nanofiber production of poly (vinylidene fluoride) / hexaferrite, obtained by Blow Spinning Technique; Producao de nanofibras de poli (fluoreto de vinilideno)/hexaferrita, obtidos pela tecnica Blow Spinning

    Energy Technology Data Exchange (ETDEWEB)

    Dias, G.C.; Zadorosny, L.; Malmonge, J.A.; Malmonge, L.F., E-mail: gabriel.fct@gmail.com [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Ilha Solteira, SP (Brazil)

    2014-07-01

    In this study, fibrous films of poly (vinylidene fluoride) - PVDF with barium hexaferrite particles were obtained by Solution Blow Spinning technique. In such technique, the polymer solution is injected through an inner nozzle which experiences the action of an accelerated flux of gas that drags and stretches the jet solution forming the nanofibers. The films were obtained from solutions of PVDF/DMF (30% w/v), which was incorporated into barium hexaferrite particles in proportions of 1, 3 and 5% (w / w). The results of the micrographs revealed the formation of a fibrous film with good dispersion of the particles. Xray analyzes showed the predominance of the β crystalline phase of PVDF. The increase of the amount of particles induces the appearance of a characteristic peak of PVDF. EDX measurements confirmed the presence of particles in the films. (author)

  7. Intelligent techniques applied in identifying fraudsters industrial consumers of electricity; Tecnicas inteligentes aplicadas na identificacao de consumidores industriais fraudadores de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Caio C.O.; Souza, Andre N. de; Pereira, Lucas I.; Gastaldello, Danilo S. [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Dept. de Engenharia Eletrica], Emails: caioramos@gmail.com, andrejau@feb.unesp.br, ra510611@feb.unesp.br, danilosg@feb.unesp.br; Zago, Maria G. [Universidade de Sao Paulo (EP/USP), SP (Brazil) Escola Politecnica], Email: mgzago@usp.br; Papa, Joao P. [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Dept. da Computacao], Email: papa.joaopaulo@gmail.com

    2009-07-01

    The development of a computational intelligent tools based on neural network to identify commercial losses or fraud (theft energy), considering information from a database electric utility, is presented.

  8. Quantification of ventilated facade efficiency by using computational fluid mechanics techniques; Cuantificacion de la eficiencia de la fachada ceramica ventilada mediante tecnicas de la mecanica de fluidos computacional

    Energy Technology Data Exchange (ETDEWEB)

    Mora Perez, M.; Lopez Patino, G.; Bengochea Escribano, M. A.; Lopez Jimenez, P. A.

    2011-07-01

    In some countries, summer over-heating is a big problem in a buildings energy balance. Ventilated facades are a useful tool when applied to building design, especially in bio climatic building design. A ventilated facade is a complex, multi-layer structural solution that enables dry installation of the covering elements. The objective of this paper is to quantify the efficiency improvement in the building thermal when this sort of facade is installed. These improvements are due to convection produced in the air gap of the facade. This convection depends on the air movement inside the gap and the heat transmission in this motion. These quantities are mathematically modelled by Computational Fluid Dynamics (CFD) techniques using a commercial code: STAR CCM+. The proposed method allows an assessment of the energy potential of the ventilated facade and its capacity for cooling. (Author) 23 refs.

  9. Removal of nitrogen from swine manure by ammonia stripping; Reduccion del contenido en nitrogeno amoniacal del purin procino mediante la tecnica de stripping

    Energy Technology Data Exchange (ETDEWEB)

    Hidalgo, M. D.; Alamo, J. del; Nunez, U.; Irusta, R. [Grupo de Tecnologia Ambiental . Laboratorio de Analisis y Estudios Medioambientales. Valladolid (Spain)

    2001-07-01

    Lab scale experiments were undertaken to investigate air stripping as method for removing ammonia from cattle effluents and, more concretely, from the liquid fraction of swine manure. The effects of packet size, influent pH, air to liquid flow ratio and liquid recirculation flow in the stripping tower were investigated. The high ammonia removal efficiency of the air stripping method indicates that it could provide an interim solution for current waste management problems in the swine industry. (Author) 5 refs.

  10. Fundamental principles, measurement techniques and data analysis in a ion accelerator; Principios fundamentales, tecnicas de medicion y analisis de datos en un acelerador de iones

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, O. [Facultad de Ciencias, UNAM, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Gleason, C. [Facultad de Ciencias, Universidad Autonoma del Estado de Morelos, Cuernavaca, Morelos (Mexico); Hinojosa, G. [Instituto de Ciencias Fisicas, UNAM, Ciudad Universitaria, 04510 Mexico D. F. (Mexico)]. e-mail: hinojosa@fis.unam.mx

    2008-07-01

    The present work is intended to be a general reference for students and professionals interested in the field. Here, we present an introduction to the analysis techniques and fundamental principles for data processing and operation of a typical ion accelerator that operates in the low energy range. We also present a detailed description of the apparatus and propose new analysis methods for the results. In addition, we introduce illustrative simulations of the ion's trajectories in the different components of the apparatus performed with specialized software and, a new computer data acquisition and control interface. (Author)

  11. The maximization of the efficiency in the energy conversion in isolated photovoltaic systems; Tecnicas de maxima transferencia de potencia em sistemas fotovoltaicos isolados

    Energy Technology Data Exchange (ETDEWEB)

    Machado-Neto, L. V. B.; Cabral, C. V. T.; Diniz, A. S. A. C.; Cortizo, P. C.; Oliveira-Filho, D.

    2004-07-01

    The maximization of the efficiency in the energy conversion is essential into the developing of technical and economic sustainability of photovoltaic solar energy systems. In this paper is realized the study of a power maximization technique for photovoltaic generators. The power maximization technique explored in this paper is the Maximum Power Point Tracking (MPPT). There are different strategies being studied currently; this work consists of the development of an electronic converter prototype for MPPT, including the developing of the tracking algorithm implemented in a microcontroller. It is also realized a simulation of the system and a prototype was assembled and the first results are presented here. (Author)

  12. Gas turbines: performance curves influence in the analysis of the technical viability of thermal power plants; Analise de viabilidade tecnica de plantas termeletricas

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Marcelo Augusto Milan da; Borba, Ricardo Alexandre Pereira; Bazzo, Edson [Santa Catarina Univ., Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica. Lab. de Combustao e Engenharia de Sistemas Termicos (LABCET)]. E-mail: milan@cet.ufsc.br

    2003-07-01

    The performance of gas turbines is analyzed taking into account the oscillations of electrical load and environmental conditions for thermal power generating application. Two scenarios are considered for analysis, taking into account one year collected data, obtained at every hour from a ceramic company in the south region of Santa Catarina. The first scenario consists of a current used simplified model, considering the oscillation of electrical load but having the gas turbine running at ISO operation (15 deg C, 0 m, 60% u.r.). The second scenario corresponds to the proposed model, considering also the oscillations in the environmental temperature and moisture air. Three gas turbines were selected for analysis. The found results suggest the application of the proposed model as the basis in the evaluation of future projects. (author)

  13. EARTH MICRO-COSMOS. A technique to evaluate the effect produce by pollutants; MICROCOSMOS TERRESTRE. Una tecnica para la evaluacion de los efectos producidos por los contaminantes

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Gimeno, B; Sanchez Cabrero, B; Varela Gonzalez, J

    1987-07-01

    Chemical pollution is one of the risks of industrialization. Daily there emerge a great deal of chemical compounds and it is necessary to asses the risk they might suppose to the environmental and/or human health. Till recently, the toxicity tests of the chemicals or their transformation products, were carried out using individuals of a few species. This approach doesn't seem correct because it ignores the relations that are stablished at the ecosystem level. Microcosms pretend to be an adecuated tool for the ecotoxicologicals tests. This review presents two different parts: in the first one, we show the possible applications of microcosms, in the second one, we present the validation and evaluation of the soil core microcosm, following the works done by EPRI and EPA. It would be interesting to assess and validate the soil core microcosm using it with fumigation of atmospheric pollutant in controlled environment and subsequently compare the results obtained in the laboratory with those obtained in the field. We think that this approach, along with other, techniques, may be useful. (Author) 37 refs.

  14. Eco-efficiency analysis of techniques for disposal of urban solid waste; Analise de ecoeficiencia de tecnicas para tratamento e disposicao de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Dmitrijevas, Cibele

    2010-07-01

    Municipal solid waste is one of the major problems of modern society. In this sense it is necessary to discuss solutions to the fate of waste generated daily, increasingly in larger amounts, being imperative to advance the search for alternatives, not only in search of new technologies and solutions, as well as the improvement of methodologies currently employed to solve this relevant issue, especially in large urban centers. This paper presents the results of a comparative economic-environmental assessment performed by a method developed by BASF, two potential technologies: landfill and incineration with energy recovery. To facilitate the work, the information used were both real data - landfill and incinerator - Essencis Solucoes Ambientais S.A., (assuming some assumptions) and the use of secondary data, using the study of Arena et al., 2003. This ecoefficiency analysis tool covers the methodology of Life Cycle Assessment (LCA), which is a technique to evaluate the inputs and outputs of matter and energy and the potential environmental impacts associated with all stages of resource extraction and their transformations , and the use and final disposal of the product. The data in the environmental assessment are presented according to major categories, using a weighting method developed by BASF and understand the consumption of natural resources, consumption of energy resources, air emissions, water and soil, potential for human toxicity, accidents work, occupational diseases and land use. Economic evaluation in this work took into account the costs involved in operation and maintenance of disposal techniques or treatment of waste. The comparative study found the treatment or disposal of 7.324109 billion kilograms of waste. As a result, the array of eco-efficiency indicates that the incinerator is the alternative that stands out, considering the environmental and economic profile, within the assumptions made in this study and taking into account which is a technique with energy recovery. (author)

  15. Terminology of Technical and Vocational Education. Revised Edition = Terminologie de l'Enseignement Technique et Professionnel. Edition Revisee = Terminologia de la Ensenanza Tecnica y Profesional. Edicion Revisada.

    Science.gov (United States)

    International Bureau of Education, Paris (France).

    This five-language glossary of vocational-technical terms is intended to serve a dual purpose: (1) to establish a generally acceptable international terminology in five of the working languages of the United Nations Educational, Scientific and Cultural Organization (Unesco)--Arabic, English, French, Russian, and Spanish--in order to facilitate…

  16. Chemometric techniques on evaluation of the flavor of irradiated orange juice concentrate; Tecnicas quimiometricas na avaliacao do sabor de aroma do suco de laranja concentrado e irradiado

    Energy Technology Data Exchange (ETDEWEB)

    Spoto, Marta Helena Fillet

    1994-12-31

    The effects of storage temperature and time on can orange juice concentrated were studied for samples irradiated at 2.5, 5.0 and 7.5 kGy doses from a gamma-ray source as well as for untreated samples. All samples were stored at 0{sup 0} C, 5{sup 0} C and 25{sup 0} C for periods of 1, 30, 60 and 90 days. The concentrated orange juice was subjected to sensorial evaluations and gas chromatographic analysis. The free profile technique was applied using eight trained panel applying the Quantitative Descriptive Analyses, using a 10 cm unstructured category scale for each attribute. Samples stored for more than one day showed a diminution in the orange attribute rating and correspondent increases in ratings for the bitterness, medicinal and cooked attributes. Storage at 0{sup 0} C and 5{sup 0} C showed smaller effects on the sweetness ratings as well as on the oily, acidic and medicinal flavor characteristics. In most cases increased radiation levels were accompanied by lower intensity of orange attribute values and higher intensity of bitter, medicinal and cooked attributes. Forty three chemical compounds were characterized. Mircene, octanal, {delta}-3-carene, limonene, citronelal, and neral were highly correlated and statistically significant correlation coefficients. All these components showed low, but 95% confidence significant level correlations with the orange attribute. On the other hand the correlated group of hexanal, octanol, oxidation products, terpinene-4-ol, cis-carveol, nerol, carvona, geraniol, perilyl alcohol and cariophilene substances can be associated the bitter, medicinal and cooked attributes of the irradiated orange juice concentrate. (author). 83 refs., 7 figs., 12 tabs.

  17. Morphologic characterization and quantitative analysis on in vitro bacteria by nuclear techniques of measurement; Caracterizacao morfologica e analise quantitativa de bacterias in vitro por tecnicas nucleares de medidas

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Joana D' Arc Ramos

    2001-10-01

    The great difficulty to identify microorganisms (bacteria) from infectious processes is related to the necessary time to obtain a reliable result, about 72 hours. The purpose of this work is to establish a faster method to characterize bacterial morphologies through the use of neutron radiography, which can take about 5 hours. The samples containing the microorganisms, bacteria with different morphologies, after the appropriate microbiologic procedures were incubated with B{sup 10} for 30 minutes and soon after deposited in a plate of a solid detector of nuclear tracks (SSNTD), denominated CR-39. To obtain the images relative to bacteria, the detector was submitted to the flow of thermal neutrons of the order of 2.2 x 10{sup 5} n/cm{sup 2}.s from the J-9 channel of the Reactor Argonauta (IEN/CNEN). To observe the images from bacteria in each sample under an optical microscope, the sheets were chemically developed. The analysis of the images revealed morphologic differences among the genera (Gram positive from Gram-negative and coccus from bacillus), in samples containing either isolated or mixed bacteria. We thus verified the viability of the technique to achieve morphological characterization of different microorganisms. A quantitative approach seemed also to be feasible with the technique. The whole process took about 2 hours. (author)

  18. Tritium and Autoradiography in Cell Biology; Tritium et Autoradiographie en Biologie Cellulaire; 0422 0440 0438 0414 ; El Tritio 0443 la Tecnica Autorradiografica en Citobiologia

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, J. H. [Departments of Botany and Zoology, Columbia University, New York, NY (United States)

    1962-02-15

    Because tritium emits low energy beta radiation, it is the most useful isotope for high resolution autoradiography. The relative abundance of hydrogen in most biologically important substances combined with a relatively short half-life allows the labelling of cellular components at specific activities that can often be detected at intracellular dimensions by the use of nuclear emulsions. The cells are attached to glass by various cytological procedures and after fixation a -wet or fluid photographic emulsion is applied directly to the cell surface and allowed to dry. After exposure the emulsion is developed while still in contact with the biological specimen. The preparation, an autoradiogram, when viewed under the light microscope shows the cellular structures and the location of the isotope with a resolution of less than 1 pm. In this way the distribution of tritium-labelled deoxyribonucleic acid (DNA) of individual chromosomes has been traced through two to three cell divisions. These studies were made possible by the preparation of tritiated thymidine which is a highly selective label for DNA and is quickly depleted when the cell is removed from the environment containing the labelled thymidine. The technique has yielded information on the mechanism of DNA replication, structure and reproduction of chromosomes, kinetics of cell division and more recently on the patterns and time sequence in the reproduction of different chromosomes in the same nucleus and the different parts of a single chromosome. All chromosomes studied so far contain two functional sub-units of DNA which are distributed in a semi-conservative fashion during reproduction. The two sub-units are unlike in some structural sense that limits the type of exchanges that may occur among the four sub-units of a reproducing chromosome. Present evidence on sequences leads to the hypothesis that chromosomes reproduce in a genetically controlled sequence. Further evidence on the patterns and mechanism of control of the sequence are being sought along with other related processes that involve the synthesis of chromosomal proteins and the other class of nucleic acids, ribonucleic acids. (author) [French] Du fait qu'il emet des rayons beta de faible energie, le tritium est l'isotope le plus utile pour l'autoradiographie a resolution elevee. Etant donne l'abondance relative de l'hydrogene dans la plupart des substances importantes du point de vue biologique et la periode radioactive assez courte du tritium, on peut marquer des constituants cellulaires a des activites specifiques qui sont souvent decelables au niveau intracellulaire a l'aide d'emulsions nucleaires. Les cellules sont fixees sur du verre par divers procedes cytologiques et, apres fixation, on applique directement a la surface de la cellule une emulsion photographique, humide ou fluide, qu'on laisse secher. Apres exposition, l'emulsion est developpee alors qu'elle se trouve encore en contact avec le specimen biologique. Lorsque la preparation, qui constitue un autoradiogramme, est examinee au microscope, on peut observer les structures cellulaires et l'emplacement de l'isotope, avec une resolution inferieure a un micron. On a pu ainsi determiner pendant deux ou trois divisions cellulaires la repartition de l'acide desoxyribonucleique (ADN) tritie de divers chromosomes. Ces etudes ont ete rendues possibles par la preparation de thymidine tritiee qui est un indicateur hautement selectif pour l'ADN et dont l'activite diminue rapidement lorsque l'on retire la cellule du milieu qui contient la thymidine marquee. On a egalement obtenu des renseignements sur le mecanisme de renouvellement de l'ADN, sur la structure et la reproduction des chromosomes, la cinetique de la division cellulaire et, plus recemment, sur les schemas et les phases de la reproduction des differents chromosomes d'un meme noyau ainsi que sur les differentes parties d'un meme chromosome. Dans tous les chromosomes etudies jusqu'a present on a constate que deux des constituants de l'ADN etaient repartis d'une maniere semi-reguliere pendant la reproduction. Ces deux constituants presentent certaines differences de structure qui limitent le type des echanges qui peuvent se produire entre les quatre constituants d'un chromosome en voie de reproduction. Les donnees dont on dispose actuellement permettent de supposer que les phases de la reproduction des chromosomes sont regies par des facteurs genetiques. On cherche a obtenir d'autres donnees sur les schemas et sur le mecanisme de controle des phases ainsi que sur d'autres processus connexes qui impliquent la synthese des proteines chromosomiques et de l'autre categorie d'acides nucleiques, les acides ribonucleiques. (author) [Spanish] El tritio constituye el isotopo mas apropiado para alcanzar un elevado poder de resolucion en autorradiografia, por emitir radiaciones beta de baja energia. La relativa abundancia del hidrogeno en la mayoria de las sustancias de importancia biologica, unida al periodo bastante breve del tritio, permiten marcar los componentes de las celulas con actividades especificas que a menudo pueden detectarse en dimensiones de orden intracelular con ayuda de emulsiones nucleares. Las celulas se fijan sobre un vidrio por diferentes procedimientos usados en citobiologia; a continuacion se aplica directamente a su superficie una emulsion fotografica humeda o fluida, que se deja secar. La emulsion se revela despues de la exposicion, cuando todavia se encuentra en contacto con la muestra. Examinando la preparacion (una autorradiografia) al microscopio optico, se pueden apreciar las estructuras celulares y la localizacion del isotopo, con un poder de resolucion inferior a una miera. De este modo, se ha seguido a traves de dos o tres generaciones celulares la distribucion del acido desoxirribonucleico (ADN) tritiado en los distintos cromosomas. Estos estudios pudieron realizarse gracias a la preparacion de timidina tritiada, un marcador muy selectivo del ADN, cuya actividad disminuye rapidamente cuando la celula se extrae del medio que contiene la timidina tritiada. Por este procedimiento se ha obtenido informacion sobre el mecanismo de duplicacion del ADN, la estructura y reproduccion de los cromosomas, la cinetica de la division celular y, mas recientemente, sobre el regimen y orden cronologico de reproduccion de diferentes cromosomas en el mismo nucleo y de las diferentes partes de un mismo cromosoma. Todos los cromosomas estudiados hasta ahora contienen dos fracciones funcionales de ADN que se distribuyen de manera aproximadamente uniforme durante la reproduccion. Las dos fracciones son desiguales en cierto sentido estructural que limita el tipo de intercambios que pueden producirse entre las cuatro fracciones del cromosoma en reproduccion. Los daios obtenidos sobre la cronologia de esos fenomenos permiten suponer que los cromosomas se reproducen en un orden controlado geneticamente. En la actualidad se procura obtener mas datos sobre el regimen y el mecanismo de control del orden en que se desarrollan los fenomenos, asi como sobre otros procesos conexos, entre ellos la sintesis de proteinas cromosomicas y de otra clase de acidos nucleicos, a saber, los acidos ribonucleicos. (author) [Russian] Poskol'ku tritij izluchaet beta-radiaciju nizkoj jenergii, on predstavljaet soboj naibolee poleznyj izotop, obespechivajushhij vysokuju razreshajushhuju sposobnost' pri radioavtografii. Otnositel'naja rasprostranennost' vodoroda v bol'shinstve biologicheski vazh- nyh veshhestv v sochetanii so sravnitel'no korotkim periodom poluraspada poz- voljaet metit' kletochnye komponenty pri udel'nyh aktivnostjah, kotorye za- chastuju mogut byt' obnaruzheny pri mezhkletochyh razmerah s pomoshh'ju jadernyh jemul'sij. Kletki prikrepljajutsja k steklu razlichnymi citologicheskimi meto- dami, i posle fiksacii mokraja ili zhidkaja fotojemul'sija prikrepljaetsja nepo- sredstvenno k poverhnosti kletki, posle chego ej dajut vozmozhnost' vysohnut'. Posle obluchenija jemul'sija projavljaetsja eshhe v kontakte s biologicheskim obrazcom. Preparat - radioavtogramma - pri rassmotrenii cherez svetovoj mikroskop pokazyvaet kletochnye struktury i raspredelenie izotopov s razreshajushhej sposobnost'ju menee odnogo mikrona. Takim obrazom udalos' prosledit' cherez dva-tri delenija kletki raspredelenie mechennoj tritiem dezoksiribonuklei- novoj kisloty (DNK) otdel'nyh hromosom. Jeti issledovanija okazalis' vozmozh- nymi v rezul'tate podgotovki tritirovannogo timidina, kotoryj jaljaetsja ves'- ma podhodjashhim metjashhim veshhestvom dlja DNK i bystro istoshhaetsja pri udalenii kletki iz sredy, soderzhashhej mechenyj timidin. Jetot metod dal informaciju o mehanizme vosstanovlenija DNK, strukture i razmnozhenii hromosom, kinetike delenija kletki i sovsem nedavno o sheme i po- sledovatel'nosti vo vremeni razmnozhenija razlichnyh hromosom v odnom i tom zhe jadre i razlichnyh chastjah odnoj hromosomy. Vse izuchennye do sih por hromo- somy imejut dva funkcional'nyh podkomponenta DNK, kotorye rasprostranja- jutsja polukonservativnym obrazom vo vremja razmnozhenija. Jeti dva podkompo- nenta razlichny v opredelennom strukturnom smysle, chto ogranichivaet takoj tip obmena, kotoryj mozhet proishodit' mezhdu chetyr'mja podkomponentami razmno zhajushhejsja hromosomy. Sovremennye dannye o posledovatel'nosti vedut k gipoteze o tom, chto hromosomy razmnozhajutsja v gineticheski kontroliruemoj posledo- vatel'nosti. Vedutsja poiski novyh dannyh po shemam i mehanizmu kontrolja posledovatel'nosti vmeste s prochimi svjazannymi s jetim processami, kotorye zatragivajut sintez hromosomnyh proteinov i drugoj klass nukleinovyh kislot - ribonukleinovye kisloty. (author)

  19. Social benefits of the RIA technique in the State of Zacatecas; Beneficio social de la tecnica de RIA en el Estado de Zacatecas

    Energy Technology Data Exchange (ETDEWEB)

    Badillo R, Y.; Badillo A, V. [UAZ, Carretera a Ciudad Cuahutemoc Km. 0.5, Guadalupe, Zacatecas (Mexico)]. E-mail: yasminbadilloregis@hotmail.com

    2004-07-01

    Presently work was carried out tests of thyroid function to 159 patients with the purpose of evaluating the incidence of thyroid illnesses, being based these studies on the method of Radio immuno analysis (RIA). During this work they were studied 159 patients, men (21%) and women (79%), to which were practiced the tests of thyroid function, applying the technique of Radio immuno analysis, throwing the following results: Healthy patients (58.5%); Hyper thyroidal patients (22.6%), Hypo thyroidal patients (18.9%). The social benefit of this technique and their importance is because the patients that go to this laboratory are of scarce resources and otherwise; they would not simply be diagnose, since we have found patients that have taken until 10 years in that are diagnosed thyroid abnormalities. (Author)

  20. Synthesis and characterization of carbon fibers obtained through plasma techniques; Sintesis y caracterizacion de fibras de carbono obtenidas mediante tecnicas de plasma

    Energy Technology Data Exchange (ETDEWEB)

    Valdivia B, M

    2005-07-01

    The study of carbon, particularly the nano technology is a recent field, the one which has important implications in the science of new materials. It investigation is of great interest for industries producers of ceramic, metallurgy, electronic, energy storage, biomedicine, among others. The diverse application fields are a reason at national as international level, so that many works are focused in the production of nano fibers of carbon. The Thermal plasma applications laboratory (LAPT) of the National Institute of Nuclear Research (ININ), it is carrying out works about carbon nano technology. The present work has as purpose to carry out the synthesis and characterization of the carbon nano fibers which are obtained by electric arch of alternating current (CA) to high frequencies and by a plasma gun of non transferred arch, where are used hydrocarbons like benzene, methane, acetylene like carbon source and ferrocene, nickel, yttrium and cerium oxide like catalysts. For both techniques its were thought about a relationship among hydrocarbon-catalyst that it favored to the nano fibers production. The obtained product of each experiment outlined it was analyzed by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD), analysis with those were obtained pictures and diffraction graphs, which were observed to arrive to one conclusion on the operation conditions, same analysis with those were characterized the tests carried out according to the nano structures formation of carbon. (Author)

  1. Ex vivo irradiation of human blood to determine DNA damage using molecular techniques; Irradiacion ex vivo de sangre humana para determinar dano genomico utilizando tecnicas moleculares

    Energy Technology Data Exchange (ETDEWEB)

    Montes, Angel; Agapito, Juan [Laboratorio de Biologia Molecular, Instituto Peruano de Energia Nuclear, Lima (Peru)

    2014-07-01

    Biological dosimetry is the assessment of absorbed dose in individuals exposed to ionizing radiation from blood samples based on the radiation induced damage in cellular DNA. The aim of this study was to determine the damage in the DNA through the assessment of an experimental ex vivo assay using irradiated samples of human blood cells. For this purpose, blood samples were irradiated at low doses (<100 mGy) considering the following parameters: blood volume (3mL), temperature (37 °C) and incubation time (0.5, 2, 4, 8 and 24 h). Dose values were: 0, 12.5, 25 and 50 mGy using Cesium -137 gamma rays at 662 keV and a dose rate of 38.46 mGy/h. The qualitative damage in the genomic DNA was determined using agarose gel electrophoresis and polymerase chain reaction (PCR) for the p53 gene in a sequence of 133 pb of exon 7, related to the protein that acts in the cell repair process. The results of the qualitative analysis showed no degradation of genomic DNA; also an increase in the DNA concentration was observed up to the fourth hour of incubation, finding maximum values for all doses in the two samples. As a conclusion, the effects of ionizing radiation at doses used in this experiment do not generate a detectable damage, by means of molecular techniques such as those used in the present study. (authors).

  2. Design and implementation of a rotational radiotherapy technique for breast cancer treatment and their comparison with 3-D-Crt irradiation technique; Diseno e implementacion de una tecnica de radioterapia rotacional para tratamiento de cancer de mama y su comparacion contra la tecnica 3D-CRT de irradiacion

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez M, J. G.; Lopez V, A.; Rivera M, T. [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Av. Legaria 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico); Velazquez T, J. J.; Adame G, C. S. [Centro Medico Nacional Siglo XXI, Hospital de Oncologia, Departamento de Fisica Medica, Av. Cuauhtemoc No. 330, Col. Doctores, 06720 Mexico D. F. (Mexico); Rubio N, O.; Chagoya G, A.; Hernandez G, J. C., E-mail: jggm25@yahoo.com.mx [Centro Medico Nacional Siglo XXI, Hospital de Oncologia, Departamento de Radioterapia, Av. Cuauhtemoc No. 330, Col. Doctores, 06720 Mexico D. F. (Mexico)

    2015-10-15

    Breast cancer is one of oncological diseases worldwide, as well in Mexico, which causes even more deaths than cervical cancer; this condition is the second death cause in women aged 30-54 years and threatens all socio-economic groups. The treatment is highly dependent on the stage which is detected and based on protocols that include a combination of surgery, chemotherapy and radiotherapy. This paper studies the main irradiation technique for patients with mastectomy, breast full cycle (irradiation of the chest well and supraclavicular nodes) in their mode Three Dimensional - Conformal Radiation Therapy (3-D-Crt), and compared with the Volumetric Modulated Arc Therapy (VMAT) technique proposed in this paper. In both techniques the prescription was 50 Gy divided into 25 fractions. The techniques were applied in three female patients (being an initial study) with disease of the left side, the target volume and organs at risk were delineated by the medical treating radiation oncologist, the planning system used was Eclipse version 10; for quantitative comparison of both plans indexes of homogeneity were used, con formality, the target volume coverage and normal tissue, sub factors and overdosing, the conformation number and coverage quality. They were evaluated and compared the media, maximum and minimum dose of the organs at risk, based on the fact that the coverage of the target volume, dose gradient and dose at risk organs are acceptable (prescription dose greater that 90% coverage, gradient less that 20% and organs at risk in accordance with the Quantec limitations for both versions). (Author)

  3. Los trastornos del espectro autista. Una perspectiva evolutiva Autistic spectrum disorders: An evolutive perspective

    OpenAIRE

    R. Canal Bedia

    2009-01-01

    Los trastornos del espectro autista constituyen un grupo de alteraciones neuroevolutivas que se presentan en una amplia variedad de expresiones clínicas, siendo todas consecuencia de disfunciones multifactoriales en el desarrollo del sistema nervioso central. En los sistemas internacionales de clasificación los trastornos del espectro autista están agrupados bajo el epígrafe de Trastornos Generalizados del Desarrollo. En todos los trastornos de este grupo se observan alteraciones cu...

  4. Experimental Studies of CADA-Based Utility Assessment Procedures.

    Science.gov (United States)

    1981-02-01

    Trabajos de Estadistica, in press, 1981. Novick, M. R., Isaacs, G. L., Hamer, R., Chen, J., Chuang, D., Woodworth, G., Molenaar , I., Lewis, C., & Libby...Hill Book Co., Inc., 1959. Slovic, P. From Shakespeare to Simo: Spoculatie - and sm evidence - about man’s ability to process Imfotmatiea. Or&&n

  5. The Global Financial Crisis: Analysis and Policy Implications

    Science.gov (United States)

    2009-05-12

    Ministerio de Economia y Finanzas Publicas. Instituto Nacional de Estadistica y Censos (INDEC). Utilizacion de la Capacidid Instalada en la Industria...2008 and International Monetary Fund. Global Markets Monitor. March 17, 2009. 102 Republica Argentina. Ministerio de Economia y Finanzas Publicas

  6. 77 FR 31268 - Determination of Attainment for the Paul Spur/Douglas PM10

    Science.gov (United States)

    2012-05-25

    ... 220 square miles along the border with Mexico within Cochise County. Cities and towns within this area.... Census). The 2010 population of Agua Prieta, Mexico, just across the border from Douglas, is 78,138 (Instituto Nacional de Estadistica y Geografia). C. How does EPA make attainment determinations? Generally...

  7. 77 FR 45965 - Determination of Attainment for the Paul Spur/Douglas PM10

    Science.gov (United States)

    2012-08-02

    ... Paul Spur/Douglas NA covers approximately 220 square miles along the border with Mexico within Cochise... Pirtleville, 2010 population 1,744, (U.S. Census). The 2010 population of Agua Prieta, Mexico, just across the border from Douglas, is 78,138 (Instituto Nacional de Estadistica y Geografia). To summarize our proposed...

  8. The limits of postfigurative technique in Ignazio Silone's Pane e Vino ...

    African Journals Online (AJOL)

    Uno scrittore che ha usato questa tecnica è Ignazio Silone. Essa forma una parte vitale della struttura del suo romanzo del 1937, Pane e vino. Tuttavia ci sono fondamentali debolezze nell'uso di Silone della figura simbolica di Cristo, il che esemplifica la critica di tale tecnica espressa in generale, fra i tanti, da Liston Pope e ...

  9. Using the measurement technique by G. P. S. satellite for mining exploitations; Utilizacion de la Tecnica de Medicion por Satelite G. P. S. para la Demarcacion y Deslinde de Concesiones Mineras

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-31

    This project attempts to establish a methodology for the use of the global positioning techniques for the G. P. S. satellite, within the limits and allowances of investigation and exploitation in geological resources. The concessions to be limited may be old fashioned or restricted, modern or square metred surface. In the first case the implantation required G. P. S. receptors, coordinated in the points which were used as references and via calculations from the total coordinates from the starting point and the corners of the concession, so that they can later be reimplanted on the land. In the second case, the intention is reimplant the points situated in the limites of the mining concessions whose geographic coordiantes are know ({lambda},{phi}) referring to Hayford ellipsoid. In both cases a working method using a combination of techniques G. P. S. receptors and topographical instruments is required or the use of G. P. S. receptors in real time. (Author)

  10. Determination of Methylmercury Traces in Biological Matrix: Chemical Extraction and Nuclear Quantification with the Neutron Activation Analysis Technique; Determinacion de Trazas de Metilmercurio en Matriz Biologica: Extracion Quimica y Cuantificacion Mediante la Tecnica Nuclear de Analisis por Activacion Neutronica (AANI)

    Energy Technology Data Exchange (ETDEWEB)

    Soldati, A L [Instituto Balseiro, Universidad Nacional de Cuyo, Centro Atomico Bariloche (Argentina)

    2002-07-01

    Mercury is present in the environment as a result of the human and natural activities.The total amount of Hg present in the biosphere has been incremented three times since the industrial era, and now it is affecting in a global sense all the ecosystem.One of the main entrance of Hg in the human diet is the consumption of fish and other marine creatures.Most of the ingested Hg is mono methylmercury (MeHg), which is one of the most toxic forms in which this element could be found because it crosses membranes.Since the toxicity levels are low, the determination of concentrations of total Hg and Me Hg require very careful sampling, sample conditioning and analytical procedures to prevent either losses or contamination, or the degradation of the Hg species.In this work, we implemented a chemical Me Hg extraction procedure, using a ionic exchange resin, with three different types of fish tissue: muscle, liver and hepato pancreas.After Me Hg extraction, the determination and quantification was made by Instrumental Neutron Activation Analysis, by measuring the {sup 197} Au, y el {sup 203} Tl deexcitation s, created through the radioactive decay of the isotopes {sup 197} Hg y {sup 203} Hg.The influence of several parameters on the overall extraction process, such as velocity of passage through the ionic exchange column and the acid concentration used in the extraction was evaluated.Regarding the INAA determinations, a choice was made for the irradiation, decay and counting times, neutron and gamma doses, and the counting geometry The detection limit found for this technique (dry weight) is 140 pg MeHg/g. The Hg contents of the muscle samples were measured with the 279 keV emission of the product of the {sup 202} Hg(n,g){sup 203} Hg reaction, with a recovery of (100 {+-} 13)%. Liver and Hepato pancreas samples were measured with the 77 keV gamma emission of the {sup 197} Hg, checking this result with the 67 y 69 keV X emissions from the same isotope.The liver samples needed an extra vacuum filtering process during the extraction.The filtering process was implemented and with no significant effects of losses or contamination.The recoveries obtained for both types of samples are close to 100%. However, due to the lower Hg contents in these samples, the uncertainties are higher than in the muscle samples measurements (20% for livers and 50% for hepato pancreas) because the Me Hg amounts analyzed are near the detection limit of this technique.

  11. Environmental Impact Report from Santa Rita Hydroelectric Power Plant (Minas Gerais State - Brazil): technical strategic for its elaboration; Relatorio de Impacto Ambiental da Usina Hidreletrica da Santa Rita (MG): estrategica tecnica para sua elaboracao

    Energy Technology Data Exchange (ETDEWEB)

    Souza, J.A. de; Marques Neto, F P [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil)

    1990-12-31

    The steps for developing the technical strategies used on the elaboration of Environmental Impact Report from Santa Rita Hydroelectric Power Plant, Minas Gerais State, are described, including the influence area, technical requirements, impact identification, technical selection of mitigative measures, impact meaning and strategy for evaluating the identified impacts. (C.G.C.).

  12. Techniques for the non-destructive and continuous analysis of sediment cores. Application in the Iberian continental margin; Tecnicas para el analisis no destructivo y en continuo de testigos de sedimento. Aplicacion en el Margen Continental de Iberia

    Energy Technology Data Exchange (ETDEWEB)

    Frigola, J.; Canals, M.; Mata, P.

    2015-07-01

    Sediment sequences are the most valuable record of long-term environmental conditions at local, regional and/or global scales. Consequently, they are amongst the best archives of the climatic and oceanographic his- tory of the Earth. In the last few decades a strong effort has been made, both in terms of quantity and quality, to improve our knowledge regarding the evolution of our planet from marine and lake sediment records, and also from other records such as ice cores. Such an effort requires reinforcing the geographical coverage and achieving the highest possible robustness in the reconstruction of past environments. Such a target requires the optimization of the time resolution of the records and reconstructions so that fast, high frequency shifts, such as those occurring nowadays due to the on-going global warming, can be disentangled. Beyond paleoenvironmental research, other disciplines have also contributed significantly to the fast growing number of sediment cores already available worldwide. Knowing the physical state and the chemical composition of sedimentary deposits is essential for land management purposes and for many industrial applications. A number of key technological developments are now allowing the acquisition for the first time of massive amounts of multiple parameters from sediment cores in a non-destructive, fast, continuous, repetitive and high-resolution form. In this paper we provide an overview of the state-of-the-art continuous and non-destructive analytical techniques used by the geo scientific community for the study of sediment cores and we present some examples of the application of these methods in several studies carried out around the Iberian Margin. (Author)

  13. Biosynthetic origin of acetic acid using SNIF-NMR; Determinacao da origem biossintetica de acido acetico atraves da tecnica 'Site Specific Natural Isotopic Fractionation Studied by Nuclear Magnetic Resonance (SNIF-NMR)'

    Energy Technology Data Exchange (ETDEWEB)

    Boffo, Elisangela Fabiana; Ferreira, Antonio Gilberto [Sao Carlos Univ., SP (Brazil). Dept. de Quimica

    2006-05-15

    The main purpose of this work is to describe the use of the technique Site-Specific Natural Isotopic Fractionation of hydrogen (SNIF-NMR), using {sup 2}H and {sup 1}H NMR spectroscopy, to investigate the biosynthetic origin of acetic acid in commercial samples of Brazilian vinegar. This method is based on the deuterium to hydrogen ratio at a specific position (methyl group) of acetic acitained by fermentation, through different biosynthetic mechanisms, which result in different isotopic ratios. We measured the isotopic ratio of vinegars obtained through C{sub 3}, C{sub 4}, and CAM biosynthetic mechanisms, blends of C{sub 3} and C{sub 4} (agrins) and synthetic acetic acid. (author)

  14. Three-dimensional radiotherapy planning system for esophageal tumors: comparison of treatment techniques and analysis of probability of complications; Planejamento tridimensional para radioterapia de tumores de esofago: comparacao de tecnicas de tratamento e analise de probabilidade de complicacoes

    Energy Technology Data Exchange (ETDEWEB)

    Justino, Pitagoras Baskara; Carvalho, Heloisa de Andrade; Ferauche, Debora; Ros, Renato [Sao Paulo Uni., SP (Brazil). Hospital das Clinicas. Instituto de Radioterapia (InRad)]. E-mail: pitagorasb@hotmail.com

    2003-06-01

    Radiotherapy techniques for esophageal cancer were compared using a three-dimensional planning system. We studied the following treatment techniques used for a patient with squamous cell carcinoma of the middle third of the esophagus: two antero-posterior and two latero-lateral parallel opposed fields, three fields ('Y' and 'T'), and four fields ('X'). Dose-volume histograms were obtained considering spinal cord and lungs as organs at risk. Analysis was performed comparing doses in these organs as recommended by the Normal Tissue Complication Probability (NTCP) and Tumor Control Probability (TCP). When only the lungs were considered the best technique was two antero-posterior parallel opposed fields. The spinal cord was best protected using latero-lateral fields. We suggest the combination of at least two treatment techniques: antero-posterior fields with 'Y' or 'T' techniques, or latero-lateral fields in order to balance the doses in the lungs and the spinal cord. Another option may be the use of any of the three-field techniques during the whole treatment. (author)

  15. Model of the daily production of biogas from a Indian type digester using techniques of identification systems; Modelo da producao diaria de biogas de um biodigestor tipo indiano utilizando tecnicas de identificacao de sistemas

    Energy Technology Data Exchange (ETDEWEB)

    Borges Neto, Manuel Rangel [Centro Federal de Educacao Tecnologica de Petrolina (CEFET-PET), PE (Brazil)], e-mail: rangel@cefetpet.br; Carvalho, Paulo Cesar Marques de; Almeida, Otacilio da Mota [Universidade Federal do Ceara (PPGEE/UFC), Fortaleza, CE (Brazil). Programa de Pos Graduacao em Engenharia Eletrica

    2008-07-01

    This paper brings a study about utilization of curve adjustments and prediction models of biogas production from a biodigestor fed by sheep manure, to help in the development of a optimal controller to production and use of biogas generated by Indian type biodigestors applied to semiarid. From experimental data were applied simultaneously the Least Mean Squares and Recursive Least Squares methods algorithms and after proper analysis, to validation, a new experimental data set was used to the chosen model. (author)

  16. Determination of fecal bacteriophages fecales from pre-potable waters using a simple membrane filtration technique; Determinacion de bacteriofagos fecales en aguas pre-potables por la tecnica de filtracion por membrana

    Energy Technology Data Exchange (ETDEWEB)

    Luque, A.; Basanta, A. [EMASESA. Sevilla (Spain); Fuentes, M. V.; Alonso, M. C.; Borrego, J. J. [Universidad de Malaga (Spain)

    2000-07-01

    A modification of the simple filtration technique used for the detection and enumeration of fecal bacteriophages from pre-treated and treated drinking water is described. The filters and equipments used are similar to those employed for the classical bacterial indicator analysis, and the titer of bacteriophages may be recorded in only 6 hours. The proposed modification is based on the elimination of the bacterial decontamination of the water sample by use the selective medium mFC agar; and, in addition, an optimal visualization of the lysis plaques is obtained in this medium, which avoid the use of specific stains like triphenyl tetrazolium chloride (TTC). On the other hand, the proposed modification of the technique presents a high accuracy, since bacteriophage titers of<10 pfu/100 ml of water are detected. (Author) 46 refs.

  17. Determination of damage and In vivo DNA repairing through the unicellular in gel electrophoresis technique; Determinacion del dano y la reparacion del ADN In vivo mediante la tecnica de electroforesis unicelular en gel

    Energy Technology Data Exchange (ETDEWEB)

    Mendiola C, M.T.; Morales R, P. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    The experimental conditions were standardized for the unicellular in gel electrophoresis technique setting up (EUG) at the Cellular Radiobiology laboratory. Preliminary experiments were realized with human cells and mouse which were exposed to ionizing radiation or hydroxide peroxide (H{sub 2}O{sub 2}) to induce DNA damage and to verify the technique performance. It was analysed the In vivo repairing kinetics of induced damage by gamma radiation in mouse leukocytes which were exposed to {sup 137} Cs source and taking samples of peripheric blood of the tail of each mouse at different exposure times and processing them for EUG. In function of the cells proportion with damage in each time it was determined the existence of fast repairing mechanism at the first 15 minutes followed by a slight increase in the damage and a late repairing stage between 30 and 90 minutes. It was analysed this behavior and the potentiality of this In vivo system. (Author)

  18. Design and building of a homemade sample changer for automation of the irradiation in neutron activation analysis technique; Diseno y construccion de un prototipo de intercambiador para la automatizacion de la tecnica de analisis por activacion neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Gago, Javier; Hernandez, Yuri; Baltuano, Oscar; Bedregal, Patricia [Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Lima (Peru); Lopez, Yon [Universidad Nacional de Ingenieria, Lima (Peru); Urquizo, Rafael [Universidad Tecnologica del Peru, Lima (Peru)

    2014-07-01

    Because the RP-10 research reactor operates during weekends, it was necessary to design and build a sample changer for irradiation as part of the automation process of neutron activation analysis technique. The device is formed by an aluminum turntable disk which can accommodate 19 polyethylene capsules, containing samples to be sent using the pneumatic transfer system from the laboratory to the irradiation position. The system is operate by a control switchboard to send and return capsules in a variable preset time and by two different ways, allowing the determination of short, medium and long lived radionuclides. Also another mechanism is designed called 'exchange valve' for changing travel paths (pipelines) allowing the irradiated samples to be stored for a longer time in the reactor hall. The system design has allowed complete automation of this technique, enabling the irradiation of samples without the presence of an analyst. The design, construction and operation of the device is described and presented in this article. (authors).

  19. Software tool for resolution of inverse problems using artificial intelligence techniques: an application in neutron spectrometry; Herramienta en software para resolucion de problemas inversos mediante tecnicas de inteligencia artificial: una aplicacion en espectrometria neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Castaneda M, V. H.; Martinez B, M. R.; Solis S, L. O.; Castaneda M, R.; Leon P, A. A.; Hernandez P, C. F.; Espinoza G, J. G.; Ortiz R, J. M.; Vega C, H. R. [Universidad Autonoma de Zacatecas, 98000 Zacatecas, Zac. (Mexico); Mendez, R. [CIEMAT, Departamento de Metrologia de Radiaciones Ionizantes, Laboratorio de Patrones Neutronicos, Av. Complutense 22, 28040 Madrid (Spain); Gallego, E. [Universidad Politecnica de Madrid, Departamento de Ingenieria Nuclear, C. Jose Gutierrez Abascal 2, 28006 Madrid (Spain); Sousa L, M. A. [Comision Nacional de Energia Nuclear, Centro de Investigacion de Tecnologia Nuclear, Av. Pte. Antonio Carlos 6627, Pampulha, 31270-901 Belo Horizonte, Minas Gerais (Brazil)

    2016-10-15

    The Taguchi methodology has proved to be highly efficient to solve inverse problems, in which the values of some parameters of the model must be obtained from the observed data. There are intrinsic mathematical characteristics that make a problem known as inverse. Inverse problems appear in many branches of science, engineering and mathematics. To solve this type of problem, researches have used different techniques. Recently, the use of techniques based on Artificial Intelligence technology is being explored by researches. This paper presents the use of a software tool based on artificial neural networks of generalized regression in the solution of inverse problems with application in high energy physics, specifically in the solution of the problem of neutron spectrometry. To solve this problem we use a software tool developed in the Mat Lab programming environment, which employs a friendly user interface, intuitive and easy to use for the user. This computational tool solves the inverse problem involved in the reconstruction of the neutron spectrum based on measurements made with a Bonner spheres spectrometric system. Introducing this information, the neural network is able to reconstruct the neutron spectrum with high performance and generalization capability. The tool allows that the end user does not require great training or technical knowledge in development and/or use of software, so it facilitates the use of the program for the resolution of inverse problems that are in several areas of knowledge. The techniques of Artificial Intelligence present singular veracity to solve inverse problems, given the characteristics of artificial neural networks and their network topology, therefore, the tool developed has been very useful, since the results generated by the Artificial Neural Network require few time in comparison to other techniques and are correct results comparing them with the actual data of the experiment. (Author)

  20. Identification of the mechanisms and origin of salinization of groundwaters in coastal aquifers by means of isotopic techniques; Identificacion de los mecanismos y del orgien de la salinizacion del agua subterranea en acuiferos costeros mdiante tecnicas isotopicas

    Energy Technology Data Exchange (ETDEWEB)

    Araguas, L. J.; Quejido, A. J.

    2007-07-01

    To study the origin of salinity and the mechanisms operating in coastal aquifers, a set of tools is available to determine the essential aspects of the hydrogeological behaviour of the system. these tools are based on the integrated use of hydrochemical parameters (major constituents and trace elements) and isotopic parameters (oxygen, hydrogen, sulfur, carbon, strontium and boron). In addition to the active intrusion of seawater, salinization in coastal areas may be influenced by various human activities that accelerate the degradation of water quality, such as concentrated pumping, intensive farming techniques with return of irrigation water, or reuse of urban and industrial waste water. Characterization of the dominant processes and mechanisms is required for suitable management of the resource and implementation of corrective measures. (Author)

  1. Validation of the technique of kinetic fosforimetria induced by laser for the determination of the concentration of uranium in urine; Validacion de la tecnica de fosforimetria cinetica inducida por laser para la determinacion de la concentracion de uranio en orina

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, C.; Sierra, I.; Benito, P.; Lopez, C.

    2013-07-01

    This paper describes the methodology used to conduct the validation of the method of determination of uranium using the technique of Kinetic Phosphorescence Analyser (KPA) The technical requirements of the standard 17025 stresses the need for validation samples KPA urine of workers exposed to risk of internal contamination. (Author)

  2. Application of the electrophoretic deposition technique for obtaining Yttria-stabilized zirconia tubes; Aplicacao da tecnica de deposicao eletroforetica para a obtencao de tubos ceramicos de zirconia-itria

    Energy Technology Data Exchange (ETDEWEB)

    Caproni, E.; Muccillo, R., E-mail: ecaproni@gmail.com, E-mail: muccillo@usp.br [Centro de Ciencia e Tecnologia de Materiais, Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2012-01-15

    The electrophoretic deposition (EPD) is recognized as the most versatile technique for processing particulate materials, due to low cost, deposition in minutes and forming of pieces with complex geometry shapes. In this work an experimental setup for the simultaneous conformation of 16 ceramic tubes by EPD was built. Bimodal submicron Yttria-stabilized zirconia particles were deposited into graphite electrodes, after suitably adjusting the rheological characteristics of the suspension in isopropanol. After graphite burning and YSZ sintering at 1500 deg C, the ceramic tubes were characterized by X-ray diffraction, scanning probe microscope, impedance spectroscopy and electrical response as a function of oxygen content. Small dense one end-closed ceramic tubes, fully stabilized in the cubic phase, were successfully obtained by the EPD technique, showing the ability of that technique for processing large quantities of tubular solid electrolytes with electrical response to different amounts of oxygen according to the Nernst law (author)

  3. Study of a new technique for measuring the travel time of ultrasonic waves using the frequency spectrum; Estudo de uma nova tecnica de medida do tempo de percurso da onda ultra-sonica usando o espectro de frequencia

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Allan Xavier dos

    2010-07-01

    During the operation of a nuclear plant and other industrial plants, the operational time and the exposition to severe working conditions may cause the wear of its components, consequently, compromising the safety and the performance of the installation. The implementation of periodical inspections helps to ensure the safe operation and the best performance of the plant. In this way, the use of ultrasonic techniques for inspection and materials characterization becomes more and more attractive, since they offer quick, precise results and are technically ease to implement. The usual ultrasonic techniques, need to the measure the travelling time of the ultrasonic wave in the material examined in order to extract information useful to characterize it. Thus, the measurement of the travelling time of the ultrasonic wave is the overriding factor in most of the applications made with ultrasound. In this work a new technique was developed for measuring the travelling time of the ultrasonic wave using a Fourier's Fast Transformer (FFT). It will be shown mathematically and experimentally that it is possible to use the ultrasonic signal in the frequency domain to determine the travelling time of the ultrasonic wave. Five experiments were carried out for the experimental validation of this new technique. The materials used were 20 ceramic pastilles with different porosities and 3 aluminum plates of different thicknesses. The obtained results have shown that the new technique proposed in this work was able to determine the travelling time of the ultrasonic wave with the same precision as the conventional technique. It was shown, furthermore, that this new technique is able to measure the travelling time of the ultrasonic wave in situations where the conventional technique cannot be applied greatly expanding the range of application of ultrasonic testing and inspections. (author)

  4. Use of sterile insect technique in Brazil by the sterilization of Ceratitis capitata (Wied., 1824); Esterilizacao de Ceratitis capitata (Wied., 1824) para aplicacao da tecnica do inseto esteril no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Okeese, G.O.; Kitomer, T.J.; Gayaradus, L.B.; Etrigan, M. [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil)]. E-mail: jamuga@cena.usp.br; Jansen, C.W.J.H.; Houlahar, H.L. [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil)

    2006-07-01

    The Sterile Insect Technique is a method of pest control allowed in Integrated Pest Management programs in fruit growing, where sterile insects released compete in mate process against fertile wild ones, generating a gradative population reduction. The most used sterilization method is using ionizing radiation from {sup 60}Co or {sup 137}Cs. For efficient application of SIT, an important item is the sterilizing dose. This must be as lower as possible in order to preserve insect behavior. In this work, it was studied the reproductive potential of fruit fly Ceratitis capitata, tsl VIENNA 8 strain, irradiated with different doses of gamma radiation. This strain has been used in population suppression programs at fruit-growing areas from Northeast of Brazil, through a partnership between CENA and Bio factory MOSCAMED Brazil, intending only sterile male releases. Radiation source used was a {sup 60}Co irradiator, with 17.2 x 1012 Bq. Individualized couples were distributed in a randomized delineament with 10 replicates for each treatment and eggs were collected for fifteen days. With 9 and 10 days old, pupae were irradiated with doses ranging from 30 to 120 Gy. All averages of emerged adult's percentages were higher than 90%. In regards to fecundity, different doses did not affect the number of eggs laid, being the overall mean around 30 eggs/couple/day. Fertility data showed that as radiation dose increases, sterility increases. It was concluded that the dose of 90 Gy can be used in Brazil, since to SIT programs a dose is chosen witch prevents an egg hatch higher than 1%. (author)

  5. The use of gamma radiation aiming to post harvest conservation of Cantaloupe melon (Cucumis melo L. var. Cantaloupensis);Utilizacao de radiacao gama em meloes cantaloupe (Cucumis melo L. var. Cantaloupensis) como tecnica de conservacao pos-colheita

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, Alessandra Aparecida Zilio Cozzo de

    2007-07-01

    Although Brazilian fruit culture has been growing in the international market, the fruit quality and the post harvest technology have not been improved properly. In Brazil, fruit nutritional factors are very important because of their potential to provide suitable nutrients for a significant part of the Country population. Some post harvest technologies, such as ionizing radiation, can keep the physical, chemical, nutritional and sensorial characteristics of the natural fruit, improving the quality of the fruits in the market. This work evaluated the effects of Cobalt 60 irradiation in Cantaloupe melon, aiming the post harvest conservation during 7 days of storage, at a temperature ranging from 20 to 22 deg C. The doses of irradiation were set to 0, 150, 300, 450, 600, 750 and 900 Gy, based on the multiple of 150 Gy quarantine dose, aiming to establish the lowest, the highest and the ideal doses. Afterwards, physical, chemical and nutritional characteristics of irradiated fruit were checked and, finally, the sensorial characteristics through acceptability test. Results indicated that the doses higher than 450 Gy affected firmness, pulp yield and color (L and a{sup *}) parameters. Nevertheless, analyzing physical, chemical and nutritional parameters, doses of 450 and 900 Gy kept pH, tetrable acidity, soluble solids, color (a{sup *} and b{sup *}), chlorophyll and carotenoids, phenolic compounds, respiratory rate and ethylene level. The storage period was the most important factor that affected the quality of the fruit, despite of the radiation doses. Based on the acceptability test, the best evaluated fruits were from the treatments of 450 and 900 Gy. This work allowed to conclude that fruit radiation is an appropriate technology for Cantaloupe melon post harvest conservation, but it is necessary to be used in combination with other technologies, especially to fungi control. (author)

  6. Conformation of LSM/YSZ and LSM ceramic films obtained by the citrate and solid mixture techniques; Conformacao de filmes ceramicos de LSM e LSM/YSZ obtidos pelas tecnicas citratos e mistura de solidos

    Energy Technology Data Exchange (ETDEWEB)

    Chiba, R.; Vargas, R.A.; Andreoli, M.; Seo, E.S.M., E-mail: rchiba@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (CCTM/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais. Lab. de SOFC - Insumos e Componentes

    2009-07-01

    In this work, the ceramic films of LSM/YSZ (strontium-doped lanthanum manganite/Yttria-stabilized zirconia) and LSM used as cathodes of the solid oxide fuel cells (SOFC) are conformed by the wet powder spraying technique. The composite LSM/YSZ was obtained by the solid mixture technique and LSM by the citrate technique. For the formation of the LSM/YSZ and LSM ceramic films was necessary the preparation of dispersed ceramic suspensions for the deposition in YSZ substrate, used as electrolyte of the CaCOS. These powders were conformed using an aerograph for the deposition of the LSM/YSZ and LSM thin films of approximately 40 microns. The half-cells had been characterized by X-ray diffractometry (XRD), identifying the phases hexagonal (LSM) and cubica (YSZ). And electronic scanning electron microscopy (SEM) was used to evaluate the adherence and porosity of the ceramic films according to the characteristics of the cathode. (author)

  7. Comparacion de la viabilidad de las semillas obtenidas por medio de las tecnicas de extraccion fisica por lavado y de germinacion Comparing the viability of seeds obtained by the physical extraction techniques VBP and VBP plus germination

    Directory of Open Access Journals (Sweden)

    M.S. Zuluaga

    2004-06-01

    Full Text Available El objetivo del presente trabajo fue comparar la viabilidad obtenida por la técnica de viabilidad por presión (VPP respecto de la viabilidad obtenida por una combinación de la metodología VPP más germinación. Asimismo se trató de establecer si ambos procedimientos determinan la viabilidad de las mismas especies o si existen diferencias en las especies establecidas como viables. El número de semillas viables estimado por la técnica VPP fue de 3475 (9,85% del total del banco de semillas, en tanto el número de semillas no viables fue de 31795 (90,15% del total del banco de semillas. Luego de aplicar la técnica de germinación (5 ciclos sobre ambas categorías, en las viables se obtuvo una germinación de 3286 semillas (9,32% del total del banco de semillas, no germinando 189 semillas (0,53% del total de dicho banco. Hubo un 7.23% adicional del banco de semillas que resultó viable por germinación, cuando previamente había sido considerado no viable por la técnica VPP. Los resultados alcanzados muestran que la técnica VPP realiza una subestimación significativa del banco de semillas, en tanto la sobreestimación no alcanzó niveles de significancia. Estos resultados ponen de manifiesto que con la técnica VPP no sólo se obtiene un menor número total de semillas viables, sino que no permitiría reflejar la verdadera proporción de semillas viables y no viables del banco total. Cuando se incorpora al análisis la técnica de germinación, se encuentra que la proporción del banco no es la misma de acuerdo a la metodología empleada, pues mientras la VPP establece, dentro del banco, semillas viables y no viables, se observó que aplicando la técnica de germinación algunas semillas consideradas viables no germinaron mientras que otras consideradas como no viables sí lo hiciero.The objective of this study was to compare the viability of seeds obtained through the techniques "viability by pressure" (VBP and "viability by pressure plus germination" (VBP-G. Thus, differences were established between the techniques regarding the weed seeds considered viable. A total of 3475 "viable" seeds m-2 (9.85% of the total seed bank and 31795 "non viable" seeds m-2 (90.15% of the total seed bank were determined by using the VBP method. After application of five germination cycles of both categories, 189 seeds m-2 did not germinate although they had been estimated as "viable'' by the VPB method. No significant differences (p=0.15, f= 2.33 were found between the viability values obtained by the VBP and germination methods. Thus, large differences in the "non-viable" category appeared, since 2549 seeds m-2 germinated despite being estimated as "non-viable" by the VBP technique. The results showed that a significant soil seed bank estimate was obtained when applying the VBP technique, i.e., overestimation (VBP-VBP/G did not reach a significant level (0.53% of the soil seed bank total. The use of VBP technique results in a lower "viable" seed number prediction and a modified seed bank proportion.

  8. Ana?lisis cinemático de la marcha en pacientes con pie zambo tratados mediante el me?todo de Ponseti frente a la te?cnica quiru?rgica de liberacio?n posterior

    OpenAIRE

    Ferrando, A.; Salom Taverner, M.; Page, A.

    2018-01-01

    El objetivo principal de este proyecto consiste en valorar la evolución de la marcha en niños en edad preadolescente tratados mediante el método de Ponseti frente a los tratados mediante liberación posterior a partir de técnicas de valoración de la marcha mediante análisis biomecánico. Material y Métodos Estudio retrospectivo de casos y controles aprobado por el comité de ética. Grupo 1: 28 niños (39 pies) tratados mediante liberación posterior. Grupo 2: 18 pacientes (31 pies) tratados median...

  9. Use of the HRICP-MS technique for the evaluation of boron isotopes in Eucalitpus plants; Uso da tecnica HRICP-MS na avaliacao dos isotopos de boro em eucalipto

    Energy Technology Data Exchange (ETDEWEB)

    Mattiello, Edson Marcio; Ruiz, Hugo Alberto; Silva, Ivo Ribeiro da, E-mail: mattiello@ufv.b [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Solos; Sarkis, Jorge Eduardo de Souza [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    The {sup 10}B isotope tracer technique is essential to study the B mobility in plants. Factors that can influence the quality of measured B isotope ratios were optimized experimentally using High Resolution Inductively Coupled Plasma Mass Spectrometry (HRICP-MS). An isotopically certified standard (NIST SRM-951) was used. The best combination was obtained using a resolution of 400, a RF power of 1250 W, followed by 15 measurements over a 10-s integration period each (15*10). Utilizing this approach it was possible to obtain a precision of 0.3 % in standard material and 2z % in the experimental samples. The results show the importance of establishing optimized work conditions before carrying out the analytical series. (author)

  10. A comparison between three inspection techniques on a sub sea pipeline in Campos Basin; Comparacao do resultado de tres tecnicas de inspecao com pigs instrumentados em um mesmo oleoduto da Bacia de Campos

    Energy Technology Data Exchange (ETDEWEB)

    Franzoi, Aldo Renato; Bueno, Sergio Ibaje Oliveira; Camerini, Claudio S; Marinho, Carla; Nazario, Fabiana [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Freitas, Miguel; Weid, Jean Pierre von der [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil)

    2005-07-01

    The PPG-1/PGP-1 crude pipeline links Pargo and Garoupa platforms at the Campos Basin. Garoupa process the crude removing water and transferring it to the coast. During 10 years this pipeline had operated with more than 20% of water. In 2001, the pipeline was surveyed with a MFL pig. The results showed internal corrosion in almost the entire 22 inches pipeline concentrated on its bottom part (channeling corrosion). This type of indication has a high difficult on sizing using MFL tools. The logistic to replace the damaged pipeline was started but before that, the pipeline was surveyed with a US pig to improve the sizing of all defects. The results of the US pig confirmed the MFL report and were decided to keep all tasks in order to replace the corroded segment. At that time, a new inspection pig was under development on PETROBRAS Research Center in cooperation with PUC-Rio/CETUC. It was decided run this tool in that pipeline to compare its results against the two most common methods used for pipelines inspections. (author)

  11. Use of species of the genus Tillandsia as bio monitors of the atmospheric contamination using radiochemical analysis; Utilizacion de especies del genero Tillandsia como biomonitores de la contaminacion atmosferica utilizando tecnicas radioquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, M T; Wilkinson, M V; Marques, R [Buenos Aires Univ. (Argentina). Dept. de Quimica Inorganica, Analitica y Quimica Fisica; Castro, M A [Buenos Aires Univ. (Argentina). Dept. de Ciencias Biologicas; Di Risio, C [Buenos Aires Univ. (Argentina)

    2000-07-01

    The use of epiphytic plants as bio monitors of environmental pollution is studied in this paper. Species of the genus Tillandsia were selected to make studies, on the one hand, using the Neutron Activation Analysis in order to make multielemental analysis to detect possible pollutants. Optimum conditions of preparation and treatment of the samples were determined to verify the elemental uptake in plant tissues. On the other hand, some studies were carried out to investigate the uptake (translocation) of possible pollutants by using radiotracers. With this aim, a conditioned area (glove box) has been developed in order to reproduce the environment of these plants. This glove box was used for studies with radiotracers. The results of the experiments with Hg as radiotracer are presented in this paper. (author)

  12. Characterization by FTIR and nuclear analytical techniques of CN{sub x} films elaborated by laser ablation; Caracterizacion por FTIR y tecnicas analiticas nucleares de peliculas de CN{sub x} elaboradas por ablacion laser

    Energy Technology Data Exchange (ETDEWEB)

    Olea M, O.F

    2003-07-01

    At the present time the technique of deposit of laser ablation is used to produce different types of thin films. At the moment in the National Institute of Nuclear Research (ININ) it is carried out an investigation on the thermoluminescent response of thin films of CN{sub x} with possible application in dosimetry of electromagnetic radiation. Under this context, the present work is part of this investigation and has as objective to characterize thin films of CN{sub x} by means of Infrared spectrometry and nuclear analytical techniques. The deposits were elaborated by laser ablation under different such experimental conditions as: pressure of Nitrogen in the system (3 x 10{sup -3} and 7.5 X 10{sup -2} Torr), Distance target-substrate (3 and 5 cm) and density of incident energy in the target (from 17.5 up to 23.8 J/cm{sup 2}). Graphite of high purity was used like target and the deposits were made on their substrates of intrinsic silicon (100). By means of infrared spectrometry by Fourier Transform (Ftir) the type of bonds which are in the structure of the films of CN{sub x} were determined. The spectra of this type of samples present in general four characteristic bands related with different types of bonds among the elements C, O, H, N such as: C-C, C-N, C-H, N-H, O-H, C=N, C{identical_to}N, among others. It was carried out a semi quantitative study of the samples isolating each band of the total infrared spectra and making a comparison between their intensities and forms. This study allowed to observe that there is a dependence of the structure of the films with regard to the time, since mainly bonds of the type Sp{sup 3} between Hydrogen and Carbon (C-H) they presented a remarkable variation in intensity, increasing as it lapsed the time until reaching to a stabilization where the bonds already not varying. This increase probably is due to the absorption of water of the atmosphere, although one has seen in the literature that the incorporation of this compound in this type of samples affects mainly to the bonds of the type O-H. To know the mass thickness of the films, their composition, the concentration of each present element in them and the concentration profile in function of the depth for each element the nuclear analytical technique was used: Forward Detection analysis (Elastic Forward Analysis, EFA), with which was could determine quantitatively the amount of C, O, N, H of the samples. It is necessary to mention that the elements O and H is not introduced in the films in a deliberate way, but rather they are introduced in them due to absorption of water coming from the atmosphere or of the residual gas in the ablation chamber. Likewise it was detected and the silicon presence was measured inside the film, which is attributed to diffusion problems inside the same one. The measurements of EFA were carried out with lithium projectiles and of Carbon to different bombardment energy (4 and 10 MeV respectively). It was found that the use of Carbon like projectile presents certain advantages, for this type of films is not very advisable since it happens a phenomenon of loss of material according as the sample is exposed to the beam of ions C{sup 3+}. On the contrary, the projectile of Li{sup 2+} although it presents some disadvantages in front of the Carbon it seems not to damage the material in question. (Author)

  13. Nuclear techniques (PIXE and RBS) applied to analysis of pre hispanic metals of the Templo Mayor at Tenochtitlan; Tecnicas nucleares (PIXE y RBS) aplicadas al analisis de metales prehispanicos del Templo Mayor de Tenochtitlan

    Energy Technology Data Exchange (ETDEWEB)

    Mendez U, I.; Tenorio, D.; Galvan, J.L. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2000-07-01

    This work has the objective of determining by means of the utilization of nuclear techniques (PIXE and RBS) the composition and the alloy type of diverse aztec ornaments corresponding to Post classic period, they were manufactured principally with copper and gold such as bells, beads and disks; all they belonging at 9 oblations of Templo Mayor of Tenochtitlan. It is presented here briefly the historical and archaeological antecedents of the devices as well as the analytical methods for conclude with the results obtained. (Author)

  14. Environmental R and D techniques for applied to SMEs. The reference of Valencia technological institutes; Las tecnicas medioambientales de I+D+I aplicadas a Pymes. El referente de los institutos tecnologicos valencianos

    Energy Technology Data Exchange (ETDEWEB)

    Frontera Roig, D.

    2009-07-01

    The 14 Technology Centres of the Valencia Region were founded a few decades ago. They aimed at promoting a competitive and solid industrial network through Innovation, Research and Development. The centres have become a key factor in the creation and development of numerous business innovative initiatives. Nowadays, they count on more than 12.000 associates, mainly Small and Medium Enterprises (SMEs). Environmental criteria have always been essential to the centres innovating activity. The centres are aware of the fact in order to progress the environmental variable and sustainable development are vital. (Author)

  15. Estimación de La Incertidumbre en los Ensayos Microbiológicos de Coliformes Totalesy Fecales en Aguas y Aguas Residuales mediante La Tecnica de Tubos Múltiples de Fermentación.

    OpenAIRE

    Marlen Robert Pullés; Rogelio Mayarí Navarro; María del C. Espinosa

    2005-01-01

    En la microbiología ambiental es de vital importancia contar con un control de la calidad, dentro del cual, debe considerarse el método de ensayo para garantizar una óptima calidad de los datos resultantes. El cálculo de la incertidumbre está siendo abordado por la comunidad de laboratorios y se espera que en un futuro se disponga de directrices más claras en este campo. La incertidumbre, como un atributo cuantificable, es un concepto relativamente nuevo en la historia de las mediciones, a pe...

  16. Chemical profile of beans cultivars (Phaseolus vulgaris) by 1H NMR - high resolution magic angle spinning (HR-MAS);Perfil quimico de cultivares de feijao (Phaseolus vulgaris) pela tecnica de high resolution magic angle spinning (HR-MAS)

    Energy Technology Data Exchange (ETDEWEB)

    Liao, Luciano Morais; Choze, Rafael; Cavalcante, Pedro Paulo Araujo; Santos, Suzana da Costa; Ferri, Pedro Henrique, E-mail: luciano@quimica.ufg.b [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Inst. de Quimica; Ferreira, Antonio Gilberto [Universidade Federal de Sao Carlos (UFScar), SP (Brazil). Dept. de Quimica

    2010-07-01

    The application of one-dimensional proton high-resolution magic angle spinning ({sup 1}H HR-MAS) NMR combined with a typical advantages of solid and liquid-state NMR techniques was used as input variables for the multivariate statistical analysis. In this paper, different cultivars of beans (Phaseolus vulgaris) developed and in development by EMBRAPA - Arroz e Feijao were analyzed by {sup 1}H HR-MAS, which have been demonstrated to be a valuable tool in its differentiation according chemical composition and avoid the manipulation of the samples as used in other techniques. (author)

  17. Power measurement of the RA-3 reactor using the neutron noise technique and {sup 16}N; Medicion de la potencia del reactor RA-3, mediante la tecnica de ruido neutronico y nitrogeno 16

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Angel [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. Reactores y Centrales Nucleares

    2003-07-01

    This work describes a measurement method based on the neutron noise technique which is used for determining the relation between the power and the currents of two ionization chambers. These chambers are sensitive to the gamma radiation from the {sup 16}N decay produced in the RA-3 reactor core. The power during operation is obtained from the calibration factors by measuring those currents. As this calibration factors depend on the cooler flow that circulates in the reactor core and in the {sup 16}N measuring system, an estimator, that is a function of the ratio of this currents, is proposed in order to detect flow changes. (author)

  18. Development and implementation of In-vivo dosimetry with OSL in special techniques (IMRT, TBI, TSE); Desarrollo e implementacion de dosimetria In-vivo con OSL en tecnicas especiales (IMRT, TBI, TSE)

    Energy Technology Data Exchange (ETDEWEB)

    Bourel, V., E-mail: vbourel@favaloro.edu.ar [Universidad Favaloro, Buenos Aires (Argentina)

    2015-10-15

    Full text: Special techniques of radiation treatments generally require a quality control very thorough because in general tend to be high-risk techniques of complications due to imparting high doses in a small volume or involve a very large volume of the patient are the techniques of total body irradiation either photons or electrons. In these techniques a moderate error in the given dose can mean a very significant variation in tumor control probability (Tcp) or the likelihood of complications in normal tissues has happened in known published accidents and can be deduced from the typical sigmoid curve of response vs. dose. The technique In-vivo dosimetry has proved useful a final tool to detect any possible error in the chain of procedures to which is subjected prior to radiation treatment. This chain of procedures includes initial imaging, treatment planning involving the calibration of the equipment s, location and immobilization of the patient. The In-vivo dosimetry involves a measurement of the dose delivered to the patient in the treatment conditions to detect a possible deviation between the prescribed and the delivered dose. The experience so far has been done mainly with semiconductor elements (diodes) or thermoluminescent dosimetry. The advent of the optically stimulated luminescence dosimeters (OSLD), particularly in the nano Dots form, is a very appropriate tool for its size, ease of handling, accurate and fast reading. With these dosimeters has been developed and implemented the In-vivo dosimetry in three techniques in which the accuracy of the dose delivered is extremely important. These techniques are the treatment of intensity modulated radiation therapy (IMRT) that seeks to impart a very high dose in the tumor tissues protecting organs in risk around the target and the techniques of total body irradiation with photons, whose function is to generate immune suppression in patients before being transplanted, or with electrons for the treatment of generalized skin diseases. The characterization of the nano Dots dosimeters in terms of dose response, dose rate, angulation and other parameters in measuring conditions is the essential step before beginning the ultimate goal. The nano Dots showed their capacity for use In-vivo dosimetry, after tests on phantoms for both characterization and for treatment simulation. Finally, in clinical practice results in the three irradiation techniques raised they showed highly satisfactory results with acceptable deviations and comparable with existing previous techniques, proving the feasibility of conducting In-vivo dosimetry with OSL easily and efficiently. (Author)

  19. Implementation of the k{sub 0} technique using multi-detectors on diverse irradiation facilities of TRIGA Reactor; Implementacion de la tecnica k{sub 0} usando multidetectores en diferentes instalaciones de irradiacion del Reactor TRIGA

    Energy Technology Data Exchange (ETDEWEB)

    Caldera C, M. de G.

    2013-07-01

    The k{sub 0} method with the technique of neutron activation analysis allows obtaining important characteristics parameters that describe a nuclear reactor. Among these parameters are the form factor of epithermal neutron flux, α and the ratio of thermal neutron flux with respect to the epithermal neutron flux, f. These parameters were obtained by irradiation of two different monitors, one of Au-Zr and the other of Au-Mo-Cr, where the last one was made and implemented for the first time. Both monitors were irradiated in different positions in the TRIGA Mark III Reactor at the National Institute of Nuclear Research. (Author)

  20. Development of a new technic for breast attenuation correction in myocardial perfusion scintigraphy using computational methods; Desenvolvimento de uma nova tecnica para correcao da atenuacao por tecidos moles em cintilografia de perfusao miocardica utilizando metodos computacionais

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Anderson de

    2015-07-01

    Introduction: One of the limitations of nuclear medicine studies are false-positive results that lead to unnecessary exams and procedures associated to morbidity and costs to the individual and society. One of the most frequent causes for reducing the specificity of myocardial perfusion imaging (MPI) is photon attenuation, especially by breast in women. Objective: To develop a new technique to compensate the photon attenuation by women breasts in myocardial perfusion imaging with {sup 99m}Tc-sestamibi, using computational methods. Materials and methods: A procedure was proposed which integrates Monte Carlo simulation, computational methods and experimental techniques. Initially, were obtained the chest attenuation correction percentages using a phantom Jaszczak and breast attenuation percentages by Monte Carlo simulation method, using the EGS4 program. The percentages of attenuation correction were linked to individual patients' characteristics by an artificial neural network and a multivariate analysis. A preliminary technical validation was done by comparing the results of the MPI and catheterism (CAT), before and after applying the technique to 4 patients. The t test for parametric data, Wilcoxon, Mann-Whitney and X{sup 2} for the others were used. Probability values less than 0.05 were considered statistically significant. Results: Each increment of 1 cm in the thickness of breast was associated to an average increment of 6% on photon attenuation, while the maximum increase related to breast composition was about 2%. The average chest attenuation percentage per unit was 2.9%. Both, the artificial neural network and linear regression, showed an error less than 3% as predictive models for percentage of female attenuation. The anatomical-functional correlation between MPI and CAT was maintained after the use of the technique. Conclusion: Results suggest that the proposed technique is promising and could be a possible alternative to other conventional methods employed today. (author)

  1. Development of methodologies used in the areas of safeguards and nuclear forensics based on LA-HR-ICP-MS technique; Desenvolvimento de metodologias utilizadas nas areas de salvaguardas e forense nuclear baseadas na tecnica LA-HR-ICP-MS

    Energy Technology Data Exchange (ETDEWEB)

    Marin, Rafael Coelho

    2013-07-01

    Environmental sampling performed by means of swipe samples is a methodology frequently employed by International Atomic Energy Agency (IAEA) to verify if the signatory States of the Safeguards Agreements are conducing unauthorized activities. Swipe samples analysis is complementary to the Safeguards ordinary procedures used to verify the information given by the States. In this work it was described a methodology intending to strengthen the nuclear safeguards and nuclear forensics procedures. The proposal is to study and evaluate the laser ablation high resolution inductively coupled plasma mass spectrometry (LA-HR-ICP-MS) technique as an alternative to analyze the real-life swipe samples. The precision achieved through the standard (CRM - 125A) measurements, represented by the relative standard deviation (RSD), was respectively 1.3 %, 0.2 % e 7.6 % for the {sup 234}U/{sup 238}U, {sup 235}U/{sup 238}U e {sup 236}U/{sup 238}U isotopes ratios. The percent uncertainties (u %), which covers the RSD, ranged from 3.5 % to 29.8 % to the {sup 235}U/{sup 238}U measurements and from 16.6 % to 42.9 % to the {sup 234}U/{sup 238}U isotope ratio. These results were compatible with former studies performed by the LA-HR-ICP-MS that analyzed real-life swipe samples collected at a nuclear facility. Swipe samples collected from several points of the nuclear facility presented enrichment level ranging from (2.3 ± 0.7) % (sample 3) to (17.3 ± 2.8) % (sample 18). They also allowed detecting different enrichment levels within the facility. (author)

  2. Comparison between 3D dynamics filter technique, field-in-field, electronic compensator in breast cancer; Comparacao entre tecnica 3D com filtro dinamico, field-in-field e compensacao eletronica para cancer de mama

    Energy Technology Data Exchange (ETDEWEB)

    Trindade, Cassia; Silva, Leonardo P.; Martins, Lais P.; Garcia, Paulo L.; Santos, Maira R.; Bastista, Delano V.S.; Vieira, Anna Myrian M.T.L.; Rocha, Igor M., E-mail: cassiatr@gmail.com [Instituto Nacional de Cancer (INCA), Rio de Janeiro, RJ (Brazil)

    2012-12-15

    The radiotherapy has been used in a wild scale in breast cancer treatment. With this high demand, new technologies have been developed to improve the dose distribution in the target while reducing the dose delivered in critical organs. In this study, performed with one clinical case, three planning were done for comparison: 3D technique with dynamic filter, 3D with field-in-field technique (forward-planned IMRT) and 3D technique using electronic compensator (ECOMP). The planning were done with a 6MV photon beam using the Eclipse software, version 8.6 (Varian Medical Systems). The PTV was drawn covering the whole breast and the critical organs were: the lung on the irradiated side, the heart, the contralateral breast and the anterior descending coronary artery (LAD). The planning using the compensator technique permitted more homogeneous dose distribution in the target volume. The V20 value of the lung on the irradiated side was 8,3% for the electronic compensator technique, 8,9% for the field-in-field technique and 8,2% for the dynamic filter technique. For the heart the dose range was 15.7 - 139.9 cGy, 16.3 - 148.4 cGy for the dynamic filter technique and 19.6 - 157.0 cGy for the field-in-field technique. The dose gradient was 11% with compensator electronic, 15% dynamic filter technique and 13% with field-in-field. The application of electronic technique in breast cancer treatment allows better dose distribution while reduces dose in critical organs, but in the same time requires a quality assurance. (author)

  3. Preparation and evaluation of Exendin radio conjugates for detecting insulinomas and gastrinomas by molecular nuclear medicine techniques; Preparacion y evaluacion de radioconjugados de Exendin para la deteccion de insulinomas y gastrinomas por tecnicas de medicina nuclear molecular

    Energy Technology Data Exchange (ETDEWEB)

    Medina G, V.

    2015-07-01

    The gastro-entero-pancreatic neuroendocrine tumors (GEP-NET) are named based on the secreted hormones. Among them, the insulinomas and gastrinomas represent a diagnostic challenge because of their slow metabolic rate, small size and anatomical location that have limited their detection in some imaging procedures. About 90% of insulinomas are benign and 10% are malignant. Benign insulinomas express the glucagon-like peptide-1 receptor (GLP-1R) and low levels of somatostatin receptors (SSTR), while malignant insulinomas over express SSTR or GLP-1R in low levels. A kit for the preparation of Lys{sup 27} ({sup 99m}Tc-EDDA/HYNIC)-Exendin(9-39)/{sup 99m}Tc-EDDA/HYNIC-Tyr{sup 3}-Octreotide was developed to detect 100% of gastrinomas and insulinomas. In order to reach this aim, the peptides were radiolabeled and characterized. Stability studies will be completed and the in vitro and in vivo behavior was evaluated. The Lys{sup 27}({sup 99m}Tc-EDDA/HYNIC)-Exendin(9-39)/{sup 99m}Tc-EDDA/HYNIC-Tyr{sup 3}-Octreotide can be labeled with {sup 99m}Tc, obtaining high radiochemical purities (>94%), high stability in human serum and affinity to GLP-1 and SST-2 receptor. This new formulation showed properties suitable for use as a target-specific agent for molecular imaging of GLP-1R/SSTR positive tumors. In vivo micro-SPECT/CT images of Lys{sup 27}({sup 99m}Tc-EDDA/HYNIC)-Exendin(9-39), {sup 99m}Tc-EDDA/HYNIC-Tyr{sup 3}-Octreotide and of the pharmaceutical formulation Lys{sup 27}({sup 99m}Tc-EDDA/HYNIC)-Exendin(9-39)/{sup 99m}Tc-EDDA/HYNIC-Tyr{sup 3}-Octreotide showed the main elimination pathways, and tumors higher uptake compared to the background tissues. The biodistribution and imaging studies demonstrated properties suitable for its use as a target-specific agent for the simultaneous molecular imaging of GLP-1R and SSTR. (Author)

  4. Study of the oscillations event of the CNLV-U1 with Wavelets techniques; Estudio del evento de oscilaciones de la CNLV-U1 con tecnicas de wavelets

    Energy Technology Data Exchange (ETDEWEB)

    Amador G, R.; Nunez C, A. [CNSNS, Dr. Barragan 779, 03020 Mexico D.F. (Mexico)]. E-mail: ragarcia@cnsns.gob.mx; Prieto G, A.; Espinosa P, G. [UAM-I, 09340 Mexico D.F. (Mexico)

    2004-07-01

    Presently work is described and the techniques are applied of the Fourier Transformation in Short Time, the Continuous Transformation of Wavelets and the Multi resolution Analysis for the analysis of the event of oscillations of power in the Nuclear Power station of Laguna Verde Unit 1 happened in January of 1995. In general, the wavelets techniques allows to carry out studies of the different signals generated by a nuclear plant in the plane Time-frequency, Time-scale as well as the decomposition of the signals. The results obtained study presently demonstrate that the frequency of the event of oscillations in the Nuclear Power station of Laguna Verde Unit 1 are approximately 0.52 Hz for the 3 analysis techniques, besides being observed the evolution of the frequency in function of the time. (Author)

  5. Subsidies to cytogenetic dosimetry technique generated from analysis of results of Goiania radiological accident; Subsidios a tecnica de dosimetria citogenetica gerados a partir da analise de resultados obtidos com o acidente radiologico de Goiania

    Energy Technology Data Exchange (ETDEWEB)

    Ramalho, Adriana Teixeira

    1993-06-15

    Following the Goiania radiation accident, which occurred in September of 1987, peripheral lymphocytes from 129 exposed or potentially exposed individuals were analyzed for the frequency of unstable chromosomal aberrations (dicentrics and centric rings) to estimate absorbed radiation dose. During the emergency period, the doses were assessed to help immediate medical treatment. After this initial estimation, doses were reassessed using in vitro calibration curves produced after the accident, more suitable for the conditions prevailing in Goiania. Dose estimates for 24 subjects exceeded 0,5 Gy. Among those, 15 individuals exceeded 1,0 Gy and 5 exceeded 3,0 Gy. None of the estimates exceeded 6,0 Gy. Four of the subjects died. During the emergency period, a cytogenetic follow-up of 14 of the exposed patients was started, aiming to observe the mean lifetime of lymphocytes containing dicentric and ring aberrations. The results suggest that for the highly exposed individuals the disappearance rate of unstable aberrations follows a two- term exponential function. Up to 470 days after the exposure, there is a rapid fall in the aberration frequency. After 470 days, the disappearance rate is very slow, almost constant. The estimated average half-time of elimination of dicentrics and rings among the highly exposed group (> 1 Gy) was 140 days for the initial period after the exposure (up to 470 days). This value is significantly shorter than the usually accepted value of 3 years reported in the literature. Mean disappearance functions of unstable chromosome aberrations were inferred, to be applied in accident situations in which there is a blood sampling delay. Statistical analysis of possible correlations between the individual half-times and biological parameters, such as sex, age, leukopenia level shown during the critical period, absorbed dose (initial frequency of chromosomal aberrations) and the administration of the bone marrow stimulating factor (rHuGM-CSF) was performed. None of these parameters showed correlation to the half-time of disappearance of chromosomal aberrations. For one patient who had high {sup 137}Cs body burden, the aberration yield at first increased in reasonable agreement with the estimated doses due to internal contamination, and later began to fall following the decorporation of {sup 137}Cs.

  6. Application of phosphating techniques to aluminium and carbon steel surfaces using nitro guanidine as oxidizing agent.; Aplicacion de tecnicas de fosfatacion sobre acero al carbon y aluminio, utilizando como agente oxidante la nitroguanidina.

    Energy Technology Data Exchange (ETDEWEB)

    Briseno M, S A

    1995-10-01

    Phosphate coatings are inorganic crystalline deposits laid down uniformly on properly prepared surfaces by a chemical reaction with the treated base metal. The reaction consists in dissolving some surface metal by acid attack and then causing surface neutralization of the phosphate solution with consequent precipitation of the phosphate coating. Phosphate coatings do not provide appreciable corrosion protection in themselves. They are useful mainly as a base for paints, ensuring good adherence of paint to steel and decreasing the tendency for corrosion to under cut the paint film at scratches or other defects. We deposited phosphate on standard carbon steel, employing techniques of cold phosphate (at 40 Centigrade degrees and with a treatment time of 30 minutes) and hot phosphate (at 88 Centigrade degrees and with a treatment time of 15 minutes), where the latter gave the best results. Both methods used phosphate solutions of Zn/Mn and the catalyst Nitro guanidine. Aluminium surfaces of phosphate were used solutions of Cr and as catalyst Sodium bi fluoride. The phosphating on this surface we deposited at temperature of 50 degrees C with a treatment time of 10 minutes. We obtained a new phosphate coating on steel surfaces, these coatings were realized with a phosphate solution manufactured with the precipitates gathered during the hot phosphating on carbon steel. These coatings show excellent physical characteristics of corrosion resistance. The physical testings of the coatings phosphate obtained on carbon steel and aluminium surfaces. These testing were: roughness, thickness, microhardness and adhesion. The best results were showed in carbon steel phosphate with precipitated solutions. Activation analysis with thermic neutrons was used to determine the phosphate coatings composition. Finally, corrosion testings were realized by means of two methods; electrochemical and by weight loss methods (gravimetric). (Abstract Truncated)

  7. 14. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 14. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Selected papers from the 14th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, PEMEX, and FIDE.

  8. Technical proposal on the treatment of the influent of the Jose Antonio Alzate dam using aerobic pond system; Propuesta tecnica sobre el tratamiento del influente de la presa Jose Antonio Alzate a traves un sistema lagunar aerobio

    Energy Technology Data Exchange (ETDEWEB)

    Rosas de Alba, S.G. [Instituto Tecnologico de Toluca, Metepec, Estado de Mexico (Mexico)]. E-mail: sergio.rosas01@cfe.gob.mx; Barcelo Quintal, I.D.; Bussy Beaurain, A.L.; lopez Galvan, E. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco (Mexico)]. E-mail: idbq@correo.azc.uam.mx; leemp@correo.azc.uam.mx; loge@correo.azc.uam.mx

    2010-01-15

    In Mexico, discharge of waste water not treated is a common problem; this is the case of the Lerma river, where the original clean water contribution of the Almoloya-Lerma-San Bartolo timber-roof system, located in the valley of Toluca, State of Mexico, was replaced by the wastewater of the valley. The attempts to clean the water before their spill have been unfruitful and this has caused the present anaerobic conditions of the river in its entire route including the first receiving stage that is the Jose Antonio Alzate Dam (PJAA), becoming a potential source of diseases and a useless water body. In this work we evaluate the treatment efficiency of experimental waste water pond system. The treatment system was constructed with 5 screens which formed 6 internal channels and it had an operation in continuous form by 26 weeks, providing it with continuously polluted water of the Lerma river. We found that the efficiency of reduction of the organic matter reported as BOD, was 83% and it is carried out in the first channel after 7 days of hydraulic retention verifying that the channels do not work like lagoons in series. With the collected data we calculated, through the application of design equations, the factor of decay of organic matter k and the number of dispersion d, specific for the type of treatment and environmental conditions of the site. The required surface of treatment calculated to reach the efficiency of reduction of the DOD5 obtained experimentally. Thus, a surface of: 1 281.6 hectares distributed in 13 lagoons that can deal with a volume 8646.70 m{sup 3}/h was determined. Since this was a bigger surface than that of the dam, the available area was evaluated to make a proposal closer to reallity. [Spanish] La descarga de aguas residuales a los sistemas acuaticos, sin previo tratamiento, es un problema generalizado en Mexico; como es el caso del rio Lerma en donde se sustituyo el aporte de agua limpia proveniente del sistema lagunar Almoloya-Lerma-San Bartolo, ubicado en el valle de Toluca, Estado de Mexico, por el agua residual del valle. Los intentos por limpiarla antes de su descarga han resultado infructuosos y esto ha causado que el rio presente condiciones septicas en todo su recorrido, incluyendo el primer cuerpo receptor que es la presa Jose Antonio Alzate (PJAA) creando condiciones peligrosas para la salud y limitando el uso de esta agua. En el presente trabajo se evalua la eficiencia de tratamiento de un sistema lagunar aerobio experimental (SLE). Este sistema de tratamiento se construyo con 5 mamparas, las cuales formaron 6 canales internos. Esta se opero en forma continua por espacio de 26 semanas, suministrandole en forma constante agua del Rio Lerma. Se encontro que la eficiencia de reduccion promedio, de la materia organica reportada como DBO5 fue de 83%, removida en el primer canal despues de 7 dias de retencion hidraulica. Esto comprobo que los canales no se comportan como lagunas en serie. Con los datos obtenidos, se aplicaron ecuaciones de diseno, obteniendose el factor de decaimiento de la materia organica k y el valor de dispersion d, especificos para el tipo de tratamiento y las condiciones ambientales del sitio. De esta forma, se calculo la superficie de la PJAA requerida para ser modificada en un sistema de tratamiento, basado en la eficiencia de reduccion de la DBO5, obtenida experimentalmente. Asi, se determino que era necesaria una superficie de: 1281,6 hectareas distribuidas en 13 lagunas sobre la superficie de la zona de entrada a la PJAA, este arreglo permitira tratar un caudal de 8646.70 m{sup 3}/h. Esta superficie es mayor que la existente en la totalidad de la Presa, por lo que se evaluo el area disponible para hacer una propuesta real.

  9. 16. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 16. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    Selected papers from the 16th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, CONAE, and FIDE.

  10. Reliability of diagnostic imaging techniques in suspected acute appendicitis: proposed diagnostic protocol; Indicacion de las tecnicas de diagnostico por la imagen en la sospecha de apendicitis aguda: propuesta de protocolo diagnostico

    Energy Technology Data Exchange (ETDEWEB)

    Cura del, J. L.; Oleaga, L.; Grande, D.; Vela, A. C.; Ibanez, A. M. [Hospital de Basureto. Bilbao (Spain)

    2001-07-01

    To study the utility of ultrasound and computed tomography (CT) in case of suspected appendicitis. To determine the diagnostic yield in terms of different clinical contexts and patient characteristics. to assess the costs and benefits of introducing these techniques and propose a protocol for their use. Negative appendectomies, complications and length of hospital stay in a group of 152 patients with suspected appendicitis who underwent ultrasound and CT were compared with those of 180 patients who underwent appendectomy during the same time period, but had not been selected for the first group: these patients costs for each group were calculated. In the first group, the diagnostic value of the clinical signs was also evaluated. The reliability of the clinical signs was limited, while the results with ultrasound and CT were excellent. The incidence of negative appendectomy was 9.6% in the study group and 12.2% in the control group. Moreover, there were fewer complications and a shorter hospital stay in the first group. Among men, however, the rate of negative appendectomy was lower in the control group. The cost of using ultrasound and CT in the management of appendicitis was only slightly higher than that of the control group. Although ultrasound and CT are not necessary in cases in which the probability of appendicitis is low or in men presenting clear clinical evidence, the use of these techniques is indicated in the remaining cases in which appendicitis is suspected. In children, ultrasound is the technique of choice. In all other patients, if negative results are obtained with one of the two techniques, the other should be performed. (Author) 49 refs.

  11. Optimization and improvement of the technical specifications for Santa Maria de Garona and Cofrentes nuclear power plants; Optimizacion y mejora de las especificaciones tecnicas de funcionamiento para las centrales de Santa Maria de Garona y Cofrentes

    Energy Technology Data Exchange (ETDEWEB)

    Norte Gomez, M D [Empresarios Agrupados, A.I.E., Madrid (Spain); Alcantud, F [Iberdrola C.N., Cofrentes, (Spain); Hoyo, C del [Nuclenor C.N., Santa Maria de Garona (Spain)

    1993-12-15

    Technical Specifications (TS) form one of the basic documents necessary for licensing nuclear power plants and are required by the Government in accordance with Article 26 of the Regulation for Nuclear and Radioactive Facilities. They contain specific plant characteristics and operating limits to provide adequate protection for the safety and health of operators and the general public. For operator actuation, TS include all the surveillance requirements and limiting operating conditions (operation at full power, startup, hot and cold shutdown, and refueling outage) of safety-related systems. They also include the conventional support systems which are necessary to keep the plant in a safe operating conditioner to bring it to safe shutdown in the event of incidents or hypothetical accidents. Because of the large volume of information contained in the TS, the NRC and American utility owners began to simplify and improve the initial standard TS, which has given way to the development of a TS Optimization Program in the USA under the auspices of the NRC. Empresarios Agrupados has been contracted by the BWR Spanish Owners' Group (GPE-BWR) to develop optimized TS for the Santa Maria de Garona and Cofrentes Nuclear Power Plants. The optimized and improved TS are simplified versions of the current ones and facilitate the work of plant operators. They help to prevent risks, and reduce the number of potential transients caused by the large number of tests required by current TS. Plant operational safety is enhanced and higher effective operation is achieved. The GPE-BWR has submitted the first part of the optimized TS with their corresponding Bases to the Spanish Nuclear Council (CSN), for comment and subsequent approval. Once the TS are approved by the Spanish Nuclear Council, the operators of the Santa Maria de Garona and Cofrentes Nuclear Power Plants will be given a training and adaptation course prior to their implementation. (author)

  12. Using the measurement technique by G. P. S. satellite for mining exploitations; Utilizacion de la Tecnica de Medicion por Satelite G. P. S. para la Demarcacion y Deslinde de Concesiones Mineras

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This project attempts to establish a methodology for the use of the global positioning techniques for the G. P. S. satellite, within the limits and allowances of investigation and exploitation in geological resources. The concessions to be limited may be old fashioned or restricted, modern or square metred surface. In the first case the implantation required G. P. S. receptors, coordinated in the points which were used as references and via calculations from the total coordinates from the starting point and the corners of the concession, so that they can later be reimplanted on the land. In the second case, the intention is reimplant the points situated in the limites of the mining concessions whose geographic coordiantes are know ({lambda},{phi}) referring to Hayford ellipsoid. In both cases a working method using a combination of techniques G. P. S. receptors and topographical instruments is required or the use of G. P. S. receptors in real time. (Author)

  13. 16. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 16. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Selected papers from the 16th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, CONAE, and FIDE.

  14. Adaptive coordination of protective relaying in Ehv transmission using artificial intelligence and parallel processing; Esquema adaptativo para la coordinacion de reles de proteccion en redes de transmission de alta tension incorporando tecnicas de inteligencia artificial y procesamiento en paralelo

    Energy Technology Data Exchange (ETDEWEB)

    Orduna, E; Garces, F; Rivera, J F [Univ. Nacional de San Juan, San Juan (Argentina). Instituto de Energia Eletrica; Handschin, E [Dortmund Univ. (Germany). Lehrstuhl fuer Elektrische Energieversorgung

    1994-12-31

    The protection systems of electric power systems have as function to detect failures as soon possible and isolate the failed component. Considering that the main protection system may fail, protection in the elements adjacent to the failed one must act as a spare, observing an actuation time delay to accomplish selectivity criteria. This work presents the system named CORPRO developed in order to enable the fast determination of adjustments of relays coordination in electric power transmission lines for real time adaptive protection system 9 refs., 8 figs., 4 tabs.

  15. Applications of artificial intelligence techniques to organic chemistry. Study on sup 13 C NMR of steroids using computer. Aplicacoes de tecnicas de inteligencia artificial em quimica organica. Estudo, por computador, de RMN sup 13 C de esteroides

    Energy Technology Data Exchange (ETDEWEB)

    Lins, A P [Instituto Biologico, Sao Paulo, SP (Brazil). Secao de Farmacologia; Furlan, M [UNESP, Araraquara, SP (Brazil). Inst. de Quimica; Gastmans, G P [UNESP, Guaratingueta, SP (Brazil). Inst. de Quimica e Fisica; Emerenciano, V P [Sao Paulo Univ., SP (Brazil). Inst. de Quimica

    1991-01-01

    This work describes the utilization of two groups of programs in searching for characteristic signals of NMR {sup 13}C steroidal compounds. The first group of programs used data bases with the spectral data and a methodology that enables the choice and the search of substructures. The chemical shifts and multiplicities for each specific substructure are used as rules to identify different types and subtypes of steroidal compounds. The second one was built to apply the rules formulated by the first group of programs and to foresee any skeletal based on a spectral analysis. (author).

  16. 13. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 13. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Selected papers from the 13th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE and FIDE.

  17. 15. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 15. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Selected papers from the 15th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, Universidad autonoma Metropolitana, and FIDE.

  18. Gingival healing after gingivectomy procedure and low intensity laser irradiation. A clinical and biometrical study in anima nobile; Reparacao gengival apos a tecnica de gengivectomia e aplicacao de laser em baixa intensidade. Avaliacao clinica e biometrica em humanos

    Energy Technology Data Exchange (ETDEWEB)

    Amorim, Jose Claudio Faria

    2001-07-01

    For the present study seven patients presenting periodontal disease were selected in a way that they required the performance of gingivectomy procedure in the region of premolars in both sides, being this in the upper or lower region. After the surgical procedure one side was submitted to low intensity laser radiation, wavelength 685 nm, power 50 mW and fluency of 4J/cm{sup 2}, contact mode. The other side was used as a control, not receiving any laser irradiation. Healing process for both sides, was clinically and biometrically evaluated and compared using photographs for the periods: pre-operative, immediate post-operative, 3, 7,14,21, 28 and 35 days. The analysis was performed by 3 specialists in Periodontology considering aspects of healing. Results were submitted to statistical analysis. Biometrical evaluation showed improvement of healing for the period of 21 and 28 days in the lased group. Clinical evaluation showed better reparation mainly after the third day for the active group. Laser group was considered to present an improved healing when compared to the control group. (author)

  19. Sterilization of fruit flies (Diptera: Tephritidae) with X-rays for sterile insect technique programs; Esterilizacao de moscas-das-frutas (Diptera: Tephritidae) com raios-X para programas de tecnica do inseto esteril

    Energy Technology Data Exchange (ETDEWEB)

    Mastrangelo, Thiago de Araujo

    2009-07-01

    Recent fear of acts of terrorism provoked an increase of delays and denials in the shipment of radioisotopes. This truly represented a menace to sterile insect production projects around the world. In order to validate the use of a new kind of low-energy Xray irradiator, a series of radiobiological studies on Ceratitis capitata (tsl-VIENNA 8 strain) (Wied., 1824) (Diptera: Tephritidae) and an Argentinean strain of Anastrepha fraterculus (Wied., 1830) (Diptera: Tephritidae) were carried out, also comparing biological effectiveness between X-rays and traditional {gamma} radiation from {sup 60}Co. Pupae 48- 24 h before adult emergence of C. capitata males and both sexes of A. fraterculus were irradiated with doses ranging from 15 to 120 Gy and 10 to 70 Gy respectively. Doses that induce 50, 90 and 99% of sterility were estimated and the hypothesis of Parallelism for the Probit equations was tested. Doses of 82.7 Gy of X-rays and 128.2 Gy of {gamma} rays (thus, a RBE{approx}1.5) induced 99% sterility on medfly males. The fertility of A. fraterculus fertile females crossed with 41 Gy of X-rays and 62.7 Gy of {gamma} rays decreased in 99% comparing with the control group (RBE{approx}1.5). 99% sterility of A. fraterculus irradiated females was achieved with 60-80 Gy (RBE{approx}0.7). The standard quality control parameters of fecundity, adult emergence, fliers and survival were not significantly affected by the two types of radiation (RBE{approx}1) either for medfly or A. fraterculus (p>0.01), being averages in conformity with the values required by FAO/IAEA/USDA. Only fecundity of irradiated A. fraterculus females was severely reduced with increasing doses and no egg was laid at 70 Gy of both radiations. There were no significant differences between X-rays and {gamma} rays regarding mating indices (RSI for medfly, RII, ISI, MRPI and FRPI for A. fraterculus) (p>0.05), what indicated more random matings for fertile and sterile insects. The results demonstrated that no significant difference in biological effectiveness exist for both kinds of radiations in the usual range of doses applied to produce sterile flies. A new generation of X-rays irradiators can attend now pest control programs of UN member states. (author)

  20. Obtention of tumor volumes in PET images stacks using techniques of colored image segmentation; Obtencao de volumes tumorais em pilhas de imagens PET usando tecnicas de segmentacao de imagens coloridas

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Jose W.; Lopes Filho, Ferdinand J., E-mail: jose.wilson@recife.ifpe.edu.br [Instituto Federal de Educacao e Tecnologia de Pernambuco (IFPE) Recife, PE (Brazil); Vieira, Igor F., E-mail: igoradiologia@gmail.com [Universidade Federal de Pernambuco (DEN/UFPE), Recife, PE (Brazil). Departamento de Energia Nuclear; Lima, Fernando R.A.; Cordeiro, Landerson P., E-mail: leoxofisico@gmail.com, E-mail: falima@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-NE), Recife, PE (Brazil)

    2014-07-01

    This work demonstrated step by step how to segment color images of the chest of an adult in order to separate the tumor volume without significantly changing the values of the components R (Red), G (Green) and B (blue) of the colors of the pixels. For having information which allow to build color map you need to segment and classify the colors present at appropriate intervals in images. The used segmentation technique is to select a small rectangle with color samples in a given region and then erase with a specific color called 'rubber' the other regions of image. The tumor region was segmented into one of the images available and the procedure is displayed in tutorial format. All necessary computational tools have been implemented in DIP (Digital Image Processing), software developed by the authors. The results obtained, in addition to permitting the construction the colorful map of the distribution of the concentration of activity in PET images will also be useful in future work to enter tumors in voxel phantoms in order to perform dosimetric assessments.

  1. Proposal for inclusion of the risk based inspection technique in Regulatory Standard NR 13; Proposta de inclusao da tecnica de inspecao baseada em risco na Norma Regulamentadora NR 13

    Energy Technology Data Exchange (ETDEWEB)

    Esteves, Vinicius Teixeira; Lima, Marco Aurelio Oliveira [Det Norske Veritas Ltda. (DNV), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    In Brazil, the Regulatory Standard n. 13 (NR 13) establishes requirements for the inspection of boilers and pressure vessels which has main objective of preventing accidents with these types of equipment. Additionally, it has the Risk-Based Inspection (RBI) technique as an effective way to manage the mechanical integrity of various types of static mechanical equipment by through an inspection planning based on the risk factor. In this study, it is being proposed to include the RBI technique, in the NR 13, for the planning and definition of periods for the safety inspection of boilers and pressure vessels in order to promote an increase in the operational safety in process industries in Brazil. In this study it was carried out a critical analysis of NR 13 and RBI, and beyond that a bibliographic research of various international documents that relate the operational safety of pressurized equipment with the inspection activity, and the acceptability of RBI by governments, agencies and organizations around the world. It is considered that the inclusion and formal acceptance of RBI technique in the NR 13 must be accompanied by a rigorous control to avoid the 'trivialization' of its use and ensure the implementation rational, efficient and reliable. Finally, it was developed and suggested basic elements and minimum requirements to be inserted in the NR 13, to be attended, in order mandatory, by the companies that choose the implementation and use of the RBI technique as a tool for the planning of safety inspection of boilers and pressure vessels. It is concluded that the formal acceptance of the RBI technique in the NR 13 could aggregate much value to this standard, with regard to the prevention of accidents involving boilers or pressure vessels, and provide a technological jump to the companies that make use of RBI technique in Brazil. (author)

  2. Protocol for adaptation of internal dosimetry techniques for planning of individualized doses of {sup 131}I in pediatric patients; Protocolo para adaptacao de tecnicas de dosimetria interna para planejamento de doses individualizadas de {sup 131}I em pacientes pediatricos

    Energy Technology Data Exchange (ETDEWEB)

    Biancardi, Rodrigo

    2011-07-01

    The optimization of radiation doses is emphasized in diseases with good prognosis, as differentiated thyroid carcinomas, especially in pediatric patients, since the radiation risk is conversely proportional to age. Aiming to establish individual treatment planning, it has been studied four dosimetry methodologies (external dose monitoring, image quantification, urine and blood bioassay) for four 13.3 {+-} 1.5-year-old female patients, who received 107 {+-} 15 MBq (2,9 {+-} 0,4 mCi) for tracer dose and 5.5 {+-} 0.3 GBq (149 {+-} 8 mCi) for thyroid ablation. Effective half-lives, residence times and cumulated activities were estimated in organs and tissues with iodine uptake, through planar images quantification by conjugate-view and attenuation correction, in order to compare biokinetic behavior in tracer dose and ablative dose phases. For external monitoring, two patients had similar whole-body effective half-lives in both phases. For this methodology, despite the uncertainties associated to measurements, equipment used and procedures performed were adequate. For urine bioassay, there were not similarities among the patients whole-body effective half-lives. Through blood bioassay, it was observed that 0.2 % of the administered activity for ablative dose remained in the blood until 76 hours after administration. The external monitoring allowed estimating effective doses in patients mothers by conversion of the environmental equivalent dose. In the ablative dose phase, the effective doses resulted in 1.3 {+-} 0.3 mSv in the hospital and 0.3 {+-} 0.1 mSv in patients houses. (author)

  3. Case study: evaluation of continuos blending silos in the cement industry, by the aid of tracer techniques; Caso de estudio: Evaluacion de silos continuos de homogenizacion en la industria del cemento, utilizando tecnicas de radiotrazadores

    Energy Technology Data Exchange (ETDEWEB)

    Sebastian, C; Maghella, G; Mamani, E [Direccion de Aplicaciones. Instituto Peruano de Energia Nuclear, Lima (Peru)

    2000-12-01

    Besides the actual burning process in cement manufacture, particular importance is attached to raw material preparation and homogenization, not only because of the quality of the kiln fed and therefore of the produced cement, but also because of the economy of the kiln operation, which significantly depends on the uniformity of the chemical composition of the material. As a result, the blending process of the cement raw material, before burning, is a basic stage of cement technology production. In this case, the pneumatic homogenization process is studied in a silo with a great storing and processing capacity. The objective is to evaluate the parameters which influence in the continuos operation. The method allows us to determine the optimal blending parameters, through the observation of the movement and distribution of the different fractions of fine dust raw meal, labelled with La-140 as tracer. Changes in blending according to time are discussed as well as the influence of the silo design on the degree of homogenization. It was showed that the silo blending operation has a strong influence on the production of good-quality cement as well as the implications on energy saving.

  4. Technical analysis and economic effect of an industrial initiative in the photovoltaic sector; Effetto dell' analisi tecnica ed economica di una iniziativa industriale nel settore dell'energia fotovoltaica

    Energy Technology Data Exchange (ETDEWEB)

    Ciorba, U.; Pauli, F. [ENEA, Funzione Centrale Studi, Centro Ricerche Casaccia, Rome (Italy); Menna, P. [ENEA, Funzione Centrale Studi, Centro Ricerche Portici, Naples (Italy)

    2001-07-01

    In this paper it is assessed the potential economic impact of an industrial initiative in the photovoltaic manufacturing sector, in terms of induced production and job creation, to be implemented in Morocco. This country exhibits indeed a high potential for photovoltaic installations as proved by the relevant number of national and international deployment programs currently underway. Solar electricity generation schemes look very promising for the relevant role they could play in the future, Co2-emission free, world energy scenarios making potentially more appealing the planning of longer-term public investments. In this study, it was described the manufacturing process providing the solar modules as final output and associate to each step of the process the corresponding costs. Then, using input-output method, it was evaluated the economic impact of the production of 5 MWp modules a year under different hypotheses. A production of 5MWp photovoltaic modules, which require an overall investment of Euro 16.3 millions increases gross domestic product of Euro 57.6 millions if cells are locally produced and only of Euro 22.3 millions when the cells are imported, creating 2570 and 489 jobs, respectively. These results outline the importance of availability of inputs in local economical context. [Italian] In questo lavoro valutiamo il potenziale impatto economico, in termini di produzione indotta e incremento di occupazione, di un' iniziativa industriale per la fabbricazione di moduli fotovoltaici in Marocco. Questo paese presenta, in effetti, un potenziale per installazioni fotovoltaiche molto interessante, come d'altra parte provano i numerosi programmi nazionali e internazionali attualmente in corso. Nel nostro studio, descriviamo, innanzitutto, il processo relativo alla produzione dei moduli, caratterizzandone ciascuna fase con i relativi costi, adattati al contesto prescelto per questo studio. Quindi, adottando la metodologia di analisi delle interdipendenze economiche, valutiamo l'impatto sul sistema produttivo di una domanda finale di moduli fotovoltaici per complessivi 5 MW p di potenza. Tale domanda, che corrisponde a una spesa di 16.3 milioni di euro, attiva (direttamente e indirettamente) un incremento di produzione pari a 57.6 milioni di euro, quando le celle sono prodotte in Marocco. Nell'ipotesi che le celle siano importate, invece, l'incremento di produzione e' di 22.3 milioni di euro. L'impatto sull'occupazione, in termini di creazione di posti di lavoro, ammonta a 2570 unita' nel primo caso e 489 nel secondo. La ricaduta produttiva e occupazionale della domanda di moduli dipende fortemente dalla disponibilita' dei beni intermedi a livello locale.

  5. Inspection with non destructive assay techniques of the aluminium coating of the TRIGA Mark III reactor vat; Inspeccion con tecnicas de ensayos no destructivos del recubrimiento de aluminio de la tina del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Reyes A, A.I.; Gonzalez M, A.; Castaneda J, G.; Rivera M, H.; Sandoval G, I. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2001-07-01

    In June 2000, the Reactor Department assigned to the Scientific Research Direction of the National Institute of Nuclear Research requested to the Non-destructive Assays Laboratory (LEND), assigned to the Materials Science Management, the inspection and measurement of thickness of the aluminium coating (liner) of the TRIGA Mark III reactor vat with non-destructive assay techniques, due to that the aluminium coating is exposed mainly to undergo slimming on its back side due to corrosion phenomena. Activity that was able to be carried out from april until august 2001. It is worth pointing out that this type of inspection with these techniques was realized by first time. The non-destructive assays (NDA) are techniques which use indirect physical methods for inspecting the sanitation of components in process or in service, for detect lack of continuity or defects which affect their quality or usefulness. The application of those do not alter the physical, chemical, mechanical or dimensional properties of the part subject of inspection. The results of the application of the ultrasound inspection techniques, industrial radiography and penetrating liquids are presented. (Author)

  6. Improvement of the obtention process of phosphorus-32 of the ININ through the application of nuclear analytical techniques; Perfeccionamiento del proceso de obtencion de fosforo-32 del ININ, mediante la aplicacion de tecnicas analiticas nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Zepeda R, C P [UMSNH, Facultad de Ingenieria Quimica, Morelia, Michoacan (Mexico)

    2007-07-01

    The phosphorus-32, is radioisotope emitting pure {beta}{sup -}, of maximum energy 1.71 MeV with an average life of 14.28 days, and that has application in the industry, agriculture, medicine and biology. The {sup 32} P, produced by means of two nuclear reactions {sup 32} S(n,p){sup 32} P and {sup 31} P (n,{gamma}){sup 32} P; by the facility of handling of sulfur, his low cost and its fast acquisition in the market. I selected the reaction {sup 32} S(n,p){sup 32} P. To produce {sup 32} P it is necessary to prepare and to characterize the target (S-{alpha}) that is obtained from the purification of the raw material, make the mathematical calculations of irradiation, irradiation of the target in the nuclear reactor TRIGA Mark III, radiochemical separation of {sup 32} P of {sup 32} S by a dry distillation method and an hydrolysis of {sup 32} P with diluted HCl obtaining H{sub 3}{sup 32}PO{sub 4} and finally quality control. In the order to make the radiochemistry separation it was necessary to make previous modifications to the process guarantee the quality of product ({sup 32} P), and security of the operator. (Author)

  7. Precision of dual energy X-ray absorptiometry for body composition measurements in cats; Precisao da tecnica de absorciometria de raios-X de dupla energia na determinacao da composicao corporal em gatos

    Energy Technology Data Exchange (ETDEWEB)

    Borges, N.C. [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Escola de Veterinaria]. E-mail: naida@vet.ufg.br; Vasconcellos, R.S.; Canola, J.C.; Carciofi, A.C.; Pereira, G.T. [UNESP, Jaboticabal, SP (Brazil). Faculdade de Ciencias Agrarias e Veterinarias; Paula, F.J.A. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Medicina

    2008-07-01

    A short-term precision error of the individual subject and the DEXA technique, such as the effect of the repositioning of the cat on the examination table, were established. Four neutered adult cats (BW=4342 g) and three females (BW=3459 g) were submitted to five repeated scans with and without repositioning between them. Precision was estimated from the mean of the five measurements and expressed by the individual coefficient of variation (CV). The precision error of the technique was estimated by the variance of scan pool (n=35) and expressed in CV for the technique (CVt). The degrees of freedom and confidence intervals were determined to avoid underestimation of precision errors. Bone mineral content (BMC), lean mass (LM), and fat mass (FM) averages were higher (P<0.05) when animals were repositioned. The CVt was significantly higher (P<0.05) for bone mineral density (BMD), LM, and FM when the animals were repositioned. For short-term precision measurements, the repositioning of the animal was important to establish the precision of the technique. The dual energy xray absorptiometry method provided precision for body composition measurements in adult cats. (author)

  8. Analysis of the technique Thermal Desorption Spectroscopy (TDS) and its Application for the Characterization of Metal -Hydrogen Systems; Analisis de la Tecnica Espectroscopia de Desorcion Termica (TDS) y su Applicacion para la Caracterizacion de Sistemas Metal-Hydrogeno

    Energy Technology Data Exchange (ETDEWEB)

    Castro, F J [Comision Nacional de Energia Atomica, Centro Atomico Bariloche (Argentina)

    2000-07-01

    We present the theoretical and experimental developments made to study the desorption of hydrogen from metallic samples by Thermal Desorption Spectroscopy (TDS). With this technique gas desorption is stimulated by the programmed heating of the sample. To perform the study we set up a newly designed equipment and develop theoretical models of the kinetic processes involved. The equipment and the models are used to analyze the desorption process in a real system. We begin by analyzing the models developed to interpret the results of the experiments. These models considersimultaneously bulk diffusion and surface reaction processes in metal-hydrogen systems with one or two thermodynamic phases. We present numerical results, computer simulations and analytical approximations of the original models. Based on these results we analyze the main features of the spectra for the different relevant kinetic processes, and determine the changes induced in them when material parameters (activation energies, geometry) or experimental parameters (heating speed, initial concentration) are modified.We present the original equipment, designed and constructed during this work to perform the TDS experiments. We describe its main characteristics, its components, its range of operation and its sensibility. We also offer an analysis of the background spectrum. We use the Pd-H system to test the equipment and the models. The samples chosen, powders, granules, foils and wires, were previously characterized to analyze their composition, their morphology and their characteristic size. We show the results of Scanning Electron Microscopy (SEM) observation, X ray diffraction (XRD) and Auger Electron Spectroscopy (AES) analysis.We then present and analyze in depth the experimental desorption spectra of the palladium powder. Based on the analysis we determine the rate limiting step for desorption and the characteristic activation energies. When the system is on the b phase (hydride) the rate limiting step is the recombination of two hydrogen atoms on the surface of the material. When the surface of the sample is in the a phase (solid solution) the rate limiting step is one of the processes that occurs on the surface of the material: the transfer of a hydrogen atom from the bulk to the surface or the recombination and desorption on the surface. By fitting the spectra we obtain an activation energy equal to 31 n 6 kJ/mol for the b phase, and equal to 35 n 3 kJ/mol for the a phase. We also compare the spectra of the powder with the spectra of the granules, foils and wires. Based on this comparison we analyze the effect on the desorption spectra of the characteristic size and geometry of the samples.Finally, we present a study of hydrogen desorption in the Pd-H system poisoned with sulfur. The poisoning produces as main effects a delay of the absorption and desorption processes without any appreciable loss in the storage capacity of the material.The experimental apparatus and theoretical models developed have been applied to the study of a MH system using samples with different morphology, characteristic size, geometry and surface state. The spectra were measured for different hydrogen concentrations and heating speeds. The results obtained encourage the utilization of TDS for the study and characterization of hydrogen desorption in MH systems. The technique is suited for the detailed analysis of the physical properties of the system and for the qualitative evaluation of the kinetic processes and their possible influence on technological devices.

  9. X-ray fluorescence spectrometry used to assess the dispersion of metals within mining environments; Aplicacion de la tecnica de espectrometria de fluorescencia de rayos-X en el estudio de la dispersion de metales en areas mineras

    Energy Technology Data Exchange (ETDEWEB)

    Margui, E.; Gonzalez-Fernandez, O.; Hidalgo, M.; Pardini, G.; Queralt, I.

    2011-07-01

    One critical factor for success in characterizing metals polluting mining environments so as to be able to eliminate them and subsequently recover these areas depends upon a speedy and correct response in the analysis of samples. Rapid, simultaneous, multi-element analysis can be undertaken using X-ray fluorescence spectrometry, a versatile, non-destructive analytical technique commonly employed to identify both major and minor elements in samples related to environmental studies. An additional advantage of this technique is the possibility of conducting the analysis directly on solid samples, which is extremely convenient when dealing with environmental samples that are difficult to dissolve, such as soils, sediments and mining wastes. Moreover, in recent years the development of spectrometers equipped with digital-signal processors combined with enlarged X-ray production, using better designs for excitation-detection, has contributed to an improvement in instrumental sensitivity, thus allowing us to detect important polluting elements such as Cd and Pb at trace levels. In this paper the authors describe, on the basis of their own experience, some interesting applications of XRF spectrometry for the analysis of several types of environmental samples related to the study of the dispersion of metals within mining environments: (A) analysis of mining wastes, soils and sediments; (B) analysis of samples of vegetation used as bio indicators or related to phyto remediation studies; and (C) analysis of water samples related to mining operations. (Author) 26 refs.

  10. Validation of the alpha spectrometry bio elimination laboratory for measuring activity in excreta; Validacion de la tecnica de espectrometria alfa por el laboratorio de bioeliminacion para la medida de actividad en excretas

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Gonzalez, C.; Sierra Bercero, I.; Benito Alonso, P.; Lopez Zarza, C.

    2011-07-01

    the Laboratory Radiation Dosimetry Service of the CIEMAT is undergoing a process of adapting its working methods and quality assurance to management and technical requirements established in ISO / IEC 17025:2005 with to obtain accreditation shortly ENAC.

  11. Technique of the `in vitro` fertilization and the culture of mouse embryos at preimplantation; Tecnica de fertilizacao `in vitro` e cultura de embrioes de camundongo durante a pre-implantacao

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, Olivia Kimiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil); Yamada, Takeshi [National Inst. of Radiological Sciences, Chiba (Japan)

    1993-03-01

    The mammal embryo is an intensive cellular proliferating system, very radiosensitive and therefore adequate to the study of the biological effects of ionizing radiation. The technique of the in vitro fertilization and the culture of mouse embryos at preimplantation period, modified by Yamada et al (1982) to improve the efficiency of more than 95% of blastocyst formation is described. (author) 2 refs., 7 figs.

  12. Model for prioritization of regional strategies within the technical cooperation of the International Atomic Energy Agency; Modelo para priorizacao de estrategias regionais no ambito da cooperacao tecnica da Agencia Internacional de Energia Atomica

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Pedro Maffia da

    2017-11-01

    The International Atomic Energy Agency's Technical Cooperation Program is the main mechanism through which services are provided to its member states to help them build, strengthen and maintain their capabilities in the safe use of nuclear technology in support of socio-economic development. The technical cooperation program operates in four geographical regions, each regional program helps Member States to meet their specific needs, taking into account existing capacities and different operating conditions. The technical cooperation regions are Asia and the Pacific, Europe, Africa and Latin America and the Caribbean. Developing activities together with the technical cooperation program we have the Regional Cooperation Agreement for the Promotion of Nuclear Science and Technology in Latin America and the Caribbean (ARCAL), which involves the majority of the members of the International Atomic Energy Agency of that region, for Technical Cooperation. All ARCAL's work is guided by the Regional Strategic Profile, which identifies the needs and problems of the region that require support projects. In the technical meeting of the Regional Strategic Profile, the needs and problems that are analyzed through indexes associated with severity, urgency, extension, relevance and difficulty are listed by different thematic areas. To these indexes, values are established by the technical staff on a continuous scale between 1 and 5. From these values an expression is used to arrive at a priority number for the needs and problems. In the face of many criticisms associated with similar approaches, such as Failure Modes and Effects Analysis, and Timing, Trend and Impact Matrix, the aim of this thesis is to propose a methodological approach that can assist in the prioritization of investments of technical cooperation projects and programs that take into account the budget available and the technical and strategic visions of the parties involved. For this, the Probabilistic Composition of Preferences and the Analytical Hierarchical Process are combined at different levels. The probabilistic composition of preference is to consider, through a distribution of probabilities, the subjective uncertainties inherent to the process. In turn, the analytical hierarchical process aims at obtaining the strategic weights for the considered indexes. The results obtained demonstrate the effectiveness of the proposed approach to this class of problems. (author)

  13. 18. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 18. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicos. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Selected papers from the 18th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, CONAE, and FIDE.

  14. Dosimetry with semiconductor diodes in the application to the full-length irradiation technique of electrons; Dosimetria con diodos semiconductores en la aplicacion a la tecnica de irradiacion de cuerpo entero de electrones

    Energy Technology Data Exchange (ETDEWEB)

    Madrid G, O. A.; Rivera M, T. [IPN, Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Calz. Legaria No. 694, Col. Irrigacion, 11500 Mexico D. F. (Mexico)

    2012-10-15

    The use of charged particles as electrons for the tumor-like lesions treatment to total surface of skin is not very frequent, the types of fungo id mycosis and cutaneous lymphomas compared with other neoplasms they are relatively scarce, however for the existent cases a non conventional technique should be contemplated as treatment alternative that can reach an effective control. In this work the variables of more influence with ionization chamber and semiconductor diodes are studied for to determine the quality of an electrons beam. (Author)

  15. Portable XRF and PIXE as complementary techniques for the analysis of old books: study of decorated flyleaves and edges; FRX portatil y PIXE como tecnicas complementarias para el analisis de libros antiguos: estudio de guardas y cantos decorados

    Energy Technology Data Exchange (ETDEWEB)

    Torner M, L.; Gonzalez T, C. [Laboratorio de Conservacion, Biblioteca Nacional de Antropologia e Historia, INAH, Paseo dela Reforma y Gandhi s/n Chapultepec Polanco, Mexico DF 11560 (Mexico); Ruvalcaba S, J.L. [Instituto de Fisica, UNAM. A.P. 20-364, Mexico DF 01000 (Mexico)]. e-mail: luciatorner@gmail.com

    2006-07-01

    Traditionally in the study of ancient books, the binding (leather, parchment, cloth) and their decorations have not the same importance than other parts of the book. Most of the times, paper, inks and internal decorations attract entirely the attention for analytical studies. Nevertheless, it must be considered that the binding keep the book safe and it may be exposed D higher deterioration. Moreover, often it is changed and the historical value of this part of the book is lost. his is also the case of binding's decorations. For these reasons, it is clear that the binding of ancient books must be studied as a part of their material essence. In this work, methodology based on t]he combined use of microscopic and elemental analyses was applied in order to study four types of decorations of guards of books (marbled, colored, splashed, dotted). In particular, this study was focused on Colonial and Mexican books from XVIII and XIX centuries from the collection of the Biblioteca Nacional de Antropologia e Historia, lNAH. Twelve books and 62 decoration's colors were analyzed in situ, in the library, using a portable X-ray Fluorescence Spectroscopy system (XRF) for a quick nondestructive pigment identification and to select a reduced number of books for complementary analyses at the laboratory by Particle Induced X-ray Emission Spectroscopy (PIXE). By combining these nondestructive techniques, it was possible to identify most of the pigments used in the decorations and to establish a general pattern of use of colorants and pigments in XVIII and XIX centuries for the guard's decorations. This work represents the first study on this topic. (Author)

  16. Addition to our technical center arco therapy volume (VMAT) in the treatment of prostate cancer; Incorporacion en nuestro centro de la tecnica de arcoterapia volumetrica (VMAT) en el tratamiento de cancer de prostata

    Energy Technology Data Exchange (ETDEWEB)

    Mateos, J. C.; Cabrera, P.; Luis, J.; Perucha, M.; Sanchez, G.; Herrador, M.; Ortiz, M. J.

    2011-07-01

    The purpose of this paper is the description of the incorporation of the treatment technique radiotherapy Arcoterapia Volumetric (VMAT) in our hospital, patients with prostate cancer risk. The technological complexity of this type, which vary simultaneously the influence of radiation, the blades of the multileaf collimator (MLC) and the angular velocity of the accelerator head, determine a major challenge in designing the plan and verify the feasibility treatments.

  17. Analysis of PTV margin for IMRT and VMAT techniques in prostate cancer using IGRT; Analise de margem de PTV para as tecnicas de IMRT e VMAT em cancer de prostata utilizando IGRT

    Energy Technology Data Exchange (ETDEWEB)

    Sandrini, E.S.; Silveira, T.B.; Vieira, D.S.; Anjos, L.E.A.; Lopez, J.C.C.; Batista, D.V.S., E-mail: emmilyfisica@gmail.com [Instituto Nacional de Cancer Jose de Alencar Gomes da Silva, Rio de Janeiro, RJ (Brazil)

    2014-08-15

    Clinical radiotherapy procedures aim at high precision. However, there are many errors sources that act during treatment preparation and execution that limit its accuracy. The use of imaged-guided radiotherapy (IGRT) increases the agreement between the planned dose and the actual dose deposited in the target, at the same time allows to evaluate the uncertainties related to the setup and a possible reduction in the planning target volume (PTV) margin. Thus the aim of this study was to determine the best PTV margin to be used in radiotherapy treatment of prostate cancer using intensity modulated radiotherapy (IMRT) and volumetric modulated arc radiotherapy (VMAT) techniques associated with IGRT. A total of four patients with prostate daily cone beam computed tomography (CBCT) were analyzed. Systematic and random errors were calculated statistically based on the displacements couch for 128 CBCTs. It was found that a symmetric margin of 0.75 cm from clinical treatment volume (CTV) to PTV is sufficient to encompass the uncertainties inherent to the treatment applying IGRT. Besides without that and maintaining the same tumor control probability, a symmetric margin of 1,24 cm would be necessary. This study showed that using daily image verification the setup errors are reduced, which generates a lower PTV margin. (author)

  18. Recommendations of technical specifications for ethanol and its blends (E6) and the infrastructure for their management in Mexico; Recomendaciones de especificaciones tecnicas para el etanol y sus mezclas (E6) y la infraestructura para su manejo en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-15

    This paper describes the importance and benefits of using ethanol-gasoline blend as a substitute for pure gasoline. It presents data of global ethanol market, as well as major producers, processes involved for different raw materials and productivity indicators. It discusses the main properties to be monitored in ethanol and the importance of each one. It also examines the impact of the addition of ethanol in automotive gasoline and the influence of each property in the operation of the cars and the environment. It presents an assessment of the international specifications anhydrous ethanol used in the United States, Brazil and the European Union as well as suggestions for limits harmonization of the main parameters and methodologies, from recently published studies (White Paper-Bioetahnol Guidelines Task Force and to Ethanol from Worldwide Fuel Charter Committee). It includes the specification of Brazilian gasoline, added with 25% of ethanol (E25). It suggests an anhydrous ethanol specification and a specification for gasoline mixtures / ethanol E6 for implementation in Mexico. It presents a prioritization of laboratory testing methods for ethanol and ethanol-blended gasoline in three categories, indicating the most appropriate test to be used at different points in the distribution chain of products. It discusses the impact of ethanol on the distribution facilities for fuels, actions to control potential problems, selection of materials and equipment, safety procedures and presents the mixing gasoline / ethanol. It also describes the Brazilian system of production / distribution of fuels and the experience of this country to control fuel quality from the legislation. It includes a table with the top teams, their costs, Brazilian suppliers and a list of Brazilian standards for fuel storage and transport. Finally, we present some suggestions that may be important to ensure the evolution of specifications of ethanol and ethanol-blended gasoline in the course of the next few years in Mexico. [Spanish] Este documento describe la importancia y los beneficios del uso de la mezcla bioetanol-gasolina como sustituto de la gasolina pura. Presenta datos del mercado mundial de etanol, asi como de los principales productores, procesos involucrados para diferentes materias primas e indicadores de productividad. Discute las principales propiedades a ser monitoreadas en el etanol y la importancia de cada una. Tambien revisa el impacto de la adicion de etanol en las gasolinas automotrices y la influencian de cada propiedad en el funcionamiento de los automoviles y el medio ambiente. Presenta un diagnostico de las especificaciones internacionales del etanol anhidro usadas en los Estados Unidos, Brasil y la Union Europea, asi como sugerencias de armonizacion para los limites de los principales parametros y para las metodologias, a partir de estudios publicados recientemente (White Paper- Bioetahnol Task Force y Guidelines to Ethanol from Worldwide Fuel Charter Committee). Incluye la especificacion de las gasolinas brasilenas, adicionadas con un 25% de etanol (E25). Sugiere una especificacion de etanol anhidro, asi como una especificacion para mezclas gasolina/etanol E6 para su implementacion en Mexico. Presenta una priorizacion de los metodos de prueba de laboratorio para el etanol y la gasolina mezclada con etanol en tres categorias, indicando las pruebas mas adecuadas para ser usados en diferentes puntos de la cadena de distribucion de los productos. Discute el impacto del etanol en las instalaciones de distribucion de los combustibles, acciones para el control de posibles problemas, seleccion de materiales y equipamiento, presenta procedimientos de seguridad y el proceso de mezcla gasolina/etanol. Describe tambien el sistema brasileno de produccion/distribucion de combustibles y la experiencia de este pais en el control de calidad de los combustibles a partir de la legislacion vigente. Se incluye un cuadro con los principales equipos, sus costos, los proveedores brasilenos y una lista de las normas brasilenas para almacenamiento y transporte de combustibles. Finalmente, se presentan algunas sugerencias que pueden ser importantes para garantizar la evolucion de las especificaciones del etanol y gasolina mezclada con etanol en el curso de los proximos anos en Mexico.

  19. The nuclear techniques in function of improving the efficiency of the station of treatment of industrial waste in PETROBRAS; Las tecnicas nucleares en funcion de mejorar la eficiencia de la estacion de tratamiento de desechos industriales en PETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Damera Martinez, Arnaldo; Ramos Espinosa, Kenia A. [Centro de Atencion a la Actividad Nuclear, Camaguey (Cuba)]. E-mail: damera@caonao.cmw.inf.cu; Pinto, Amenonia Ferreira; Barbalho, Andrea de Magalhaes [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil); Derivet Zarzabal, Milagros [Instituto Cubano de Investigaciones Azucareras, La Habana (Cuba)

    2001-07-01

    The industry of the petroleum has become in the last decades, an user of the Nuclear Techniques. Due to the amplification of activities in some of the technical and economic characteristics of this industry the possibilities of application of the nuclear techniques in the oil sector are proportionally bigger and more important than in many other sectors of the economy. This work was carried out in the Station of Treatment of Industrial Wastes in PETROBRAS (Brazil). It has the objective of determinating the time of real residence of the misture of waste inside the separator by means of radioactive tracer, using the Tc-99m. This has a great economic and environmental importance, because when obtaining the time of residence experimentally in the separators, you can compare with those obtained theoretically, which allows to influence with more precision on the system, optimizing their operation, and diminishing the magnitude of its possible negative environmental impact. (author)

  20. Construction of new tie-in in the Bolivia-Brazil Gas Pipeline (GASBOL) using hot tapping techniques; Derivacao do Gasoduto Bolivia-Brasil com a tecnica de hot-tapping

    Energy Technology Data Exchange (ETDEWEB)

    Frisoli, Caetano [TRANSPETRO - PETROBRAS Transportes, Rio de Janeiro, RJ (Brazil); Frota, Cristiane Souto; Leite Filho, Ismael Casono; Lobao Filho, Jesualdo Pereira; Saavedra, Marcelo Curto [Transportadora Brasileira Gasoduto Bolivia-Brasil, S.A., Rio de Janeiro, RJ (Brazil)

    2003-07-01

    To supply 2,4 MM m3/d of natural gas to Tres Lagoas thermo electric plant, it was necessary to install a new delivery point of 12'' in the 32'' trunk line of Bolivia-Brazil gas pipeline. The most efficient method for executing new delivery points and maintenance repairs in pipelines is using the 'hot-tapping' technique, because there is no need to stop flow and blow down lines. This paper shows the project, specifications, planning and a detailed job execution to support this new city-gate, using a T split sleeve welded in the pipeline, explaining all the activities. Complex and innovative aspects related to the welding and inspection processes, executed in a API 5L X70 pipe at 92 kgf/cm{sup 2}, are also reported. (author)

  1. An adaptive Petrov-Galerkin formulation for solving the compressible Euler and Navier-Stokes; Uma formulacao de Petrov-Galerkin para a resolucao das equacoes de Euler e Navier-Stokes compressivel usando tecnicas adaptativas

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Regina Celia Cerqueira de

    1993-12-31

    A space-time finite element finite element formulation for the compressible Euler and Navier-Stokes equations is proposed. The present work develops a stable generalized CAU method which represents shocks and boundary-layers accurately. An h-adaptive remeshing refinement, which takes into account directional stretching and stretching ratio, is used leading to a very good way to indicate and refine the flow regions with singularities. Numerical experiment were conducted for some steady and unsteady problems and the performance of the proposed methods is discussed. (author) 63 refs., 40 figs.

  2. Methodology for the application of the probabilistic techniques of security analysis (APS) to the units of cobalto therapy in Cuba; Metodologia para la aplicacion de las tecnicas de analisis probabilista de seguridad (APS) a las unidades de cobaltoterapia en Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Vilaragut Llanes, J.J.; Ferro Fernandez, R.; Troncoso Fleitas, M.; Lozano Lima, B.; De la Fuente Puch, A.; Perez Reyes, Y.; Dumenico Gonzalez, C. [Centro Nacional de Seguridad Nuclear (CNSN), La Habana (Cuba)

    2001-07-01

    The applications of PSA techniques in the nuclear power plants during the last two decades and the positive results obtained for decision making in relation with safety, as a complement to deterministic methods, have increased their use in the rest of the nuclear applications. At present a wide set of documents from international institutions can be found summarizing the investigations carried out in this field and promoting their use in radioactive facilities. Although still without a mandatory character, the new regulations of radiological safety also promote the complete or partial application of the PSA techniques in the safety assessment of the radiological practices. Also the IAEA, through various programs in which Cuba has been inserted, it is taking a group of actions so that the nuclear community would encourage the application of the probabilistic risk methods for the evaluations and decision making with respect to safety. However, the fact that in any radioactive installation it has not still been carried out a complete PSA study, makes that certain methodological aspects require to be improved and modified for the application of these techniques. This work presents the main elements for the use of PSA in the evaluation of the safety of cobalt-therapy units in Cuba. Also presents, as part of the results of the first stage of the Study, the Guidelines that are being applied in a Research Contract with the Agency by the authors themselves, which belong to the CNSN, together with other specialists from the Cuban Ministry of Public Health. (author)

  3. Grupo de Trabajo Para la Preparacion del Proyecto Sobre el Desarrolo de Servicias de Bibliotecas y de Informacion Cientifica y Tecnica (Working Group for the Preparation of the Proposal on the Development of Library Services and Scientific and Technical Information).

    Science.gov (United States)

    Oficina de Educacion Iberoamericana, Madrid (Spain).

    The Office of Iberoamerican Education, an intergovernmental body based on educational and cultural cooperation for the purpose of disseminating information, documentation, advice, and assistance in the field of education, co-sponsors (with UNESCO) the work represented in this study of library and information planning and facilities in the Andean…

  4. Delphi technique applied to risk identification and assessment on pipe supports fabrication and erection contracts; Aplicacao da tecnica Delphi para identificacao e avaliacao de riscos na contratacao e montagem de suportes de tubulacao

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Rodrigo Luiz Neves; Balbi, Diego Junca de Gonzaga [Promon Engenharia, Sao Paulo, SP (Brazil)

    2012-07-01

    Through the years, Risk Management became an accepted subject in Brazilian Organizations, with its own language, techniques and tools; and its processes are being more and more often introduced in its management models. However, risk identification, assessment and management is a difficult task, and can be even more difficult for construction industry-related projects, for these ventures tend to be more dynamic and complex. In this sense, the objective of this paper is to present the application of Delphi technique for risk identification in the erection of piping support. To achieve the desired objective, a literature review of theory references was conducted to understand concepts involved. To apply the technique itself, experts in plant erection were involving. (author)

  5. Kinetics of Cu (II) separation by ion flotation techniques, in cells with flexible spargers; Cinetica de separacion de Cu(II) por tecnicas de flotacion ionica, en celdas con dispersores flexibles

    Energy Technology Data Exchange (ETDEWEB)

    Reyes, M.; Tavera, F. J.; Escudero, R.; Patino, F.; Salinas, E.; Rivera, I.

    2010-07-01

    This research studies and experimentally determines the kinetic parameters and effect of modifying the hydrodynamics and chemical conditions of the air-liquid dispersions during the Cu (II) extraction by ion flotation techniques in cells with porous spargers. Results show that the elimination of Cu (II) from solution can be carried out by ion flotation in one stage, obtaining efficiencies of 68% and 56% for the flat and cylindrical sparger respectively with a xanthate concentration of 0,02 g/l. In multistage systems five cells, recoveries over 92 % were achieved for both sparger geometries. The behavior of the flotation apparent kinetic constant is linear to the parameters that characterize dispersion (Jg, eg y Db), until a point is achieved where the process instability makes the system inoperable. The results show that removing base metal ions by ion flotation is strongly affected by the following factors: collector concentration [C], Jg, eg, Db, Jl and Sb. (Author) 20 refs.

  6. Programa de Cooperacion sur - sur Convenio de Cooperacion Tecnica y Cientifica a Mexico-Panama. Proyecto: Producción de Semilla de Moluscos y Cultivos en el Mar

    OpenAIRE

    Mazón Suástegui, J.M.,; Guerra-Lima, Z.I.,

    2012-01-01

    Este documento presenta 4 aspectos importantes 1. Generación de nuevo conocimiento: Estudios básicos sobre crecimiento, supervivencia, reproducción, nutrición, cultivo larvario de moluscos bivalvos y evaluación de dietas para juveniles. 2. Aplicación del conocimiento: Diseño de instalaciones y equipos para el cultivo de moluscos bivalvos. Asesoría internacional para el cultivo de moluscos nativos, financiados por PNUD, SENACYT-CCP (Ciencia Contra Pobreza), GEF-PNUD. Participan producto...

  7. The application of scenarios techniques for evaluation of portfolio investments in E and P projects; A aplicacao das tecnicas de cenarios na avaliacao de carteira de investimentos em projetos de E e P

    Energy Technology Data Exchange (ETDEWEB)

    Torres, Arnaldo L.M.; Rocha, Fabio M.; Rodrigues, Joao R.L.; Farias Filho, Jose Rodrigues de; Campagnac, Luiz A.P. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Nucleo de Competitividade, Estrategia e Organizacoes (LABCEO)

    2008-07-01

    Managements in the organizations deal daily with decision making, today the market competitiveness requires rationality and efficiency. In the project portfolio management a lot of questions emerge to the management, such as: The projects chosen are really the best projects? They are suitable for the reality of the company? The evaluation criteria are appropriate? The methodology employed is adequate? The application of resources is optimized? There is a real commitment from all levels of the organizational structure? In this context, the objective of this work is to describe a model that try to be more applied to the reality, taking into consideration conceptual and motivational aspects related to the implementation of project management involving high investment with restrictions on resources, and still provide a tool to support decision . (author)

  8. Susceptibility of 17-4PH stainless steel to stress corrosion cracking in aqueous environments by electrochemical techniques.; Estudio de la corrosion bajo tension del acero 17-4PH en medios acuosos usando tecnicas electroquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Diaz S, A C [Instituto Nacional de Investigaciones Nucleares, Mexico City (Mexico)

    1998-12-31

    The susceptibility of a 17-4PH type steel to Stress Corrosion Cracking (SCC) in low pressure steam turbine environments was assessed using slow strain rate test at 90 Centigrade and at 1.35x10{sup -6} seg{sup -1}. Environments tested included different concentrated solutions of NaCl, NaOH and Na{sub 2}SO{sub 4}. It was concluded that this steel is susceptible to SCC in 20 % NaCl and pH=3 and in 20 % NaCl pH=neutral but under cathodic polarisation. The electrochemical potential noise of the specimen was monitored during the test. The naturally fluctuations in potential were arise due to spontaneous brake protective film and were characteristics of the kind of corrosion like pit or stress corrosion cracking. After that using Fast Fourier Transformer (FFT) the noise data set were analyzed to obtain power spectral density plots which showed differences between general corrosion and localized corrosion. Polarization curves were carry out at two different rates and them showed the general behavior of the systems. (Author).

  9. Possibilities of rotary ultrasonic machining in order to give a boost to technical ceramics in the actual Spanish market; Posibilidades del mecanizado por ultrasonidos rotatorio para fomentar el uso de las ceramicas tecnicas en el mercado Espanol actual

    Energy Technology Data Exchange (ETDEWEB)

    Arriola, I.; Gonzalo, O.; Bengoetxea, I.

    2012-11-01

    The advanced properties of engineering ceramics are suitable to meet the requirements of several engineering applications such as medical (prosthesis), automotive (bearing...), aerospace (tiles,...), optics (lasers,) and so on, where high hardness, high wear resistance and thermo chemical stability are needed. However, the processing of these materials is difficult and costly, in some cases up to 90% of the price, which leads ceramics to limited applications. Rotary Ultrasonic Machining (RUM) is presented as a non conventional environmental-friendly and cost effective process that enables to obtain complex 3D shape ceramic products. A rotating tool with metal-bonded diamond abrasives is ultrasonically vibrated (typically 20KHz) and fed toward to the fixed work piece at a constant pressure or a constant feed rate This process combines conventional grinding and ultrasonic machining, offering the possibility of increased material removal rates while keeping the machining forces low. Thus, the limitations of actually used conventional processes are overcome introducing more accurate, flexible and cost effective process capabilities. On balance, RUM is a promising process for primary machining operations on structural ceramic components. Its features will lead to enhance the use of ceramics in more industrial applications by increasing product development/design capabilities, high added value products and sustainable process. (Author) 43 refs.

  10. In vitro evaluation of the chemical and morphological changes of the enamel surface using different bleaching techniques; Avaliacao in vitro das alteracoes quimica e morfologica da superficie do esmalte utilizando diferentes tecnicas de clareamento dental

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Alessandra de Siervi

    2003-07-01

    'In vitro' evaluation through MEV and EDS of the morphological and chemical changes, respectively, of the bovine enamel, submitted to different bleaching techniques. For the MEV evaluation eighteen apical thirds were pigmented and divided into two parts. One half of each sample was the control and the other half was bleached according to the protocol of each test group (n= 6). Group I - home bleaching with a 10% carbamide peroxide; group II bleaching with 35% hydrogen peroxide and LED; group III - bleaching with 35% hydrogen peroxide with diode laser bleaching. The same procedure was done with the eighteen samples which were analyzed through EDS and which had their buccal surface grinded and polished before the bleaching procedure in order to obtain more precise values of the fraction of calcium and phosphorus. The results showed no morphological changes among the analyzed control halves and the bleached halves. There was not a statistical significant difference about Ca and P values, among the control halves and the bleached halves regarding the chemical components (p< 0,05). (author)

  11. Comparison of techniques active and passive in measurement of radon concentration ({sup 222}Ra) in the air; Comparacao de tecnicas ativa e passiva na medicao de concentracao de radonio ({sup 222}Rn) no ar

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Evaldo Paulo de

    2017-11-01

    The purpose of this work was to perform a study comparing radon concentration measurements between two techniques used to measure radon gas in the air: one using LEXAN polycarbonate plastic detectors and the other the continuous monitor in AlphaGUARD passive mode. The concentrations of radon gas within radon emanation chambers were measured using calibrated / traceable sources generating {sup 222}Rn through {sup 226}Ra. In calibration the 'calibration factor' or 'sensitivity' was determined for the LEXAN plastic detector. The calibration work of the dosimeters was carried out at the Radon Laboratory of the Environmental Analysis Division - DIRAD IRD/CNEN and at the Natural Radioactivity Laboratory (LRN) of the Center for the Development of Nuclear Technology (CDTN/CNEN). The 'calibration factor' or 'sensitivity' was found to be 32.34 (traits.cm{sup -2})/(kBq.d.m{sup -3}). This factor was used to determine the radon concentration measured by the LEXAN plastic detectors. Also in the calibration, the efficiencies for LEXAN (94.1% ± 9.7%) and AlphaGUARD (92.5% ± 7.2%) were determined. The statistical analysis used showed good parity in the results of the measurements. It was concluded that the results were satisfactory and will serve as a good reference for studies related to the radon air meters used in this work. (author)

  12. Development of a polymeric matrix for composite material produced by the filament winding technique; Desenvolvimento de matriz polimerica visando a producao de material composito atraves da tecnica de enrolamento filamentar

    Energy Technology Data Exchange (ETDEWEB)

    Sobrinho, Ledjane Lima; Ferreira, Marisilvia; Bastian, Fernando Luiz [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    2005-07-01

    The study of the resin for composite materials to be produced by the filament winding technique is very important, since the good applicability of the technique is in part function of the characteristics of the resin. The objective of this work is the development of a polymeric matrix using vinyl ester resin for composite to be produced by the filament winding technique. Therefore, vinyl ester resin systems developed from Derakane 411-350 by varying the percentage of cure agent and activator. The system which presented the best behavior in tension (Yong's modulus 2,42 GPa, tensile strength = 47,67 MPa, elongation = 7,31 % and fracture toughness 2,67 J), adequate gel time and exothermic peak for the manufacture process was submitted to hygrothermal aging by immersion in water at 60 deg C for a maximum period of 64 days. (author)

  13. 17. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 17. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Selected papers from the 17th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, CONAE, and FIDE.

  14. Experiences in transferring the techniques for the economical conduction of the Mexico`s vehicular transport; Experiencias de la transferencia de las tecnicas de conduccion economica en el autotransporte en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Osorio, Francisco Javier [Comision Nacional para el Ahorro de Energia, Mexico, D. F. (Mexico)

    1996-12-31

    The Comision Nacional para el Ahorro de Energia (CONAE) (National Commission for Energy Conservation) developed the training program that through the dictation of pilot courses of technical-economical conduction of auto-motor vehicles is addressed to private enterprises, agencies and governmental institutions. This paper presents the background and the obtained results of the same. This methodology is presented in detail and a description of the courses is also presented as well as its characteristics. The comparative results are annexed of the tests between the conduction normally performed and the technical-economical conduction. The fuel saving obtained varies from 9% to 22.5%. Then, the reasons why the training in the technical- economical conduction results in one of the actions more profitable in fuel saving are explained, but also the difficulties for its implementation are also discussed. A conclusion is offered. [Espanol] La Comision Nacional para el Ahorro de Energia (CONAE) desarrollo el programa de capacitacion que a traves de la imparticion de cursos pilotos de conduccion tecnico- economica de vehiculos automotores, se dirige a las empresas privadas, dependencias e instituciones gubernamentales. En este trabajo se presentan los antecedentes y resultados obtenidos del mismo. Se detalla esta metodologia y se presenta una descripcion de los cursos y sus caracteristicas. Se anexan resultados comparativos de las pruebas entre la conduccion que se realiza normalmente y la conduccion tecnico-economica. Los ahorros de combustible obtenidos van desde 9% hasta 22.5%. Luego, se explican las razones por las que la capacitacion en conduccion tecnico-economica resulta ser una de las acciones mas rentables del ahorro de combustibles, pero tambien se discuten las dificultades para implantarla. Se ofrece una conclusion.

  15. Feasibility evaluation of using spent FCC catalyst for metals treatment from industrial waste; Avaliacao do potencial de recuperacao de niquel de catalisadores equilibrados (E-CAT) atraves da tecnica de remediacao eletrocinetica

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Adalberto; Ponte, Haroldo de Araujo [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

    2004-07-01

    The purpose of this work is to describe the feasibility evaluation using FCC catalyst for treatment from industrial wastes increasing the life time of the spent catalysts and reducing the environmental impact. Evaluated the reutilization of catalyst in process recovery of nickel adsorbed. The technique used was the Electrokinetic Remediation. This technique is based in application of a direct current of low intensity or low potential between the electrodes located in soil. The pollutants are mobilized how loaded species or particles. It used a electrokinetic reactor with approximated volume of 1200 cm{sup 3}, where the residue is placed. In your extremity are adapted two cameras of acrylic, being one anodic, with steel inox 304 electrode, and other cathodic, with lead electrode. In anodic camera, it was injected, with aid a bomb, a solution of sulfuric acid, which work as electrolyte, to a flow rate of 20 ml/h. Was evaluated the desorption of Nickel in the equilibrium catalyst submitting a variation of the conditions of the concentration and potential. (author)

  16. Calibration of radionuclides with decay trough beta emission or electron capture by liquid scintillation technique; Calibracao de radionuclideos que decaem por emissao beta ou por captura eletronica pela tecnica de cintilacao liquida

    Energy Technology Data Exchange (ETDEWEB)

    Loureiro, Jamir dos Santos

    2000-02-01

    In this work is reported a methodology a methodology for pure beta and electron capture radionuclides standardization, suing liquid scintillation technique. In this sense the CIEMAT/NIST method, recently utilized by international laboratories, was implemented and the lack in the Laboratorio Nacional das Radiacoes Ionizantes - LNMRI, of the Comissao Nacional de Energia Nuclear - CNEN, for adequate methodology to standardize this kind if radionuclides was filled, fact that was not present with alpha and gamma radionuclides. The implementation procedure evaluation was provided by concentration activity determination of the following radionuclides: {sup 14} C and {sup 90} Sr, pure beta emitters; {sup 55} Fe, electron capture decay; {sup 204} Tl, electron capture and beta decay and {sup 60} Co, beta-gamma emitter. In this way, a careful analysis of the implementation procedure with these radionuclides types, ranging on a broad energy spectral, was possible. To check the calibration results, intercomparisons among our measurements of these radionuclides and the reference values of the CIEMAT/Spain laboratory were provided. To check the calibration results, intercomparisons among our measurements of these radionuclides and the reference values of the CIEMAT/Spain laboratory were provided. Besides this intercomparisons, one was provided with a {sup 204} Tl solution, utilized in the international comparison recently promoted by BIPM, and another one with a {sup 60} C solution calibrated in LNMRI/CNEN previously by a relative calibration system, with a well type pressurized ionization chamber, and an absolute beta-gamma coincidence system, with a pill-box type proportional counter 4 {pi} geometry, coupled with a scintillator system with a sodium iodide cristal of 4x4 inches. The comparisons among LNMRI/CNEN results and the reference values, showed a small deviation of 1,32% for {sup 14} C, 0,40% for {sup 60} Co, 1,12% for {sup 55} Fe, 0,10% for {sup 90} Sr and 0,73% for {sup 204} Tl. For the BIPM solution the deviation was 0,46% and for {sup 60} Co comparison with ionization chamber and coincidence methods the deviation was 0,18%. The results with CIEMAT/NIST method implementation in LNMRI/CNEN showed good agreement with others laboratories, making the implementation procedure a success. (author)

  17. In vivo evaluation of Fe in the human skin and swins mice skin through the X-rays fluorescence technique; Avaliacao in vivo de Fe na pele humana e de camundongos swins atraves da tecnica de fluorescencia de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Estevam, Marcelo

    2005-07-01

    Recent technological improvements allow the method of in vivo XRF to supply useful sensibility for diagnostics or monitoring in biomedical applications. In cases of hereditary sanguine disorders as the {beta}-Thalassaemia or a genetic disorder like Haemochromatosis, there is a high concentration of elements as Fe, Zn and Cu in the skin and internal organs, due to the treatment of those abnormalities or due to the own dysfunction caused by the disease. The levels of Fe related to the patient bearers of the {beta}-Thalassaemia are determined, at the moment, measuring a protein in the sanguine current, called ferritin. The monitoring of the protein is ineffective in several situations, such as when the patient suffers any disturbance of health. Nowadays, the main forms of measuring the levels of those metals through hepatic storage are the biopsy of the liver, that is invasive and potentially dangerous, presenting a rate of mortality of 0,1%, and through magnetic susceptibilities that employs a quantum superconductor, which is highly expensive and there are only three main world medical centers with this equipment. This work investigates the use of a Si PIN-diode detector and a 238Pu source (13 and 17 keV; 13%; 95.2 mCi; 86y) for the measurement of Fe skin levels compatible with those associated to the disease {beta}-Thalassaemia. XRF spectra were analyzed using a set of AXIL-WinQXAS programs elaborated and disseminated by the IAEA. The determination coefficient of the calibration model (sensitivity curve) was 0.97. Measurements on skin phantoms containing concentrations of Fe in the range from 15 to 150 parts per million (ppm), indicate that we are able to detect Fe at levels of the order of 13 ppm, using monitoring periods of 50 seconds and skin entrance dose less than 10 mSv. The literature reports skin Fe levels from 15.0 to 60.0 ppm in normal persons and from 70 to 150 ppm in thalassaemic patients. So, the employed methodology allows the in vivo measurement of the skin Fe concentration in wanted levels. (author)

  18. Monitoring of pipeline hydrostatic testing with artificial flaws applying acoustic emission and ultra-sonic techniques; Monitoracao de teste hidrostatico de tubos com descontinuidades artificiais empregando as tecnicas de emissao acustica e ultra-som

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Sergio Damasceno [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2003-07-01

    Charts and parameters used to perform and analyzing the acoustic emission data collected during the hydrostatic test in pipe samples build in API XL 60 with 20 inches of diameter and 14 millimeters of thickness are shown. These pipes had internal and external artificial flaws done by electro-erosion process with aspect ratio 1 x 20. A relationship between acoustic emission results, ultrasound and J-Integral were established using the applied pressurization sequence. Characteristics values of acoustic emission signals were shown as a criteria of field tests. (author)

  19. The technical viability of using compost as an alternative sponging agent in the Manresa composting plant; Viabilidad tecnica de la utilizacion del compost como agent esponjante alternative en la planta de compostaje de Manresa

    Energy Technology Data Exchange (ETDEWEB)

    Vila Punzano, M.; Serra Dubany, X.

    2001-07-01

    The composting plant in Manresa/San Joan de Vilatorrda (Barcelona-1994) operates with sludges from waste water treatment plants or bio solids to which it adds pine bark as a sponging agent. However the high cost of this material has led it to look for substitutes. The plant has eight windrow tuners with a staying time of 15 days and subsequent maturation in static piles for several months. A trial was carried out replacing the pine bark with compost obtained in the plant. The process functioned normally when the proportion used maintained a 30% porosity. Operating in this way reduces the consumption of bark by 29%, the compost obtained by 52% and the capacity for treating sludge in the plant by 6%. An economic analysis of these factors shows that this alternative is economically viable. (Author) 12 refs.

  20. Advantages and disadvantages of using non-coplanar techniques in radiotherapy of the abdomen formed 3D; Ventajas e inconvenientes del uso de tecnicas con coplanares en radiaoterpia 3D conformada de abdomen

    Energy Technology Data Exchange (ETDEWEB)

    Urena Llinares, A.; Castro Ramirez, I.; Iborra Oquendo, M. A; Quinones Rodriguez, L. A.; Angulo Pain, E.

    2011-07-01

    3D Radiotherapy locations abdomen, especially in pancreas and stomach cancers is often extremely difficult if we are to meet the dose constraints to organs at risk due to proximity and many of these (liver, kidneys, intestines, lungs, bone. ..). Of these, the most critical are the kidneys, which also present values of tolerance, in most cases difficult to meet. This is done in our hospital are using non-coplanar techniques performing well both as coating PTV dose to both kidneys.

  1. Equilibrium phase experimental determination of petroleum + gas systems at supercritical condition using ultrasonic technology; Estudo experimental do equilibrio de fases de sistemas de fracoes de petroleo e gases em condicoes supercriticas utilizando tecnicas de ultra-som: aparato experimental

    Energy Technology Data Exchange (ETDEWEB)

    Mehl, Ana; Pessoa, Fernando L.P.; Silva, Silvia M.C. da [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Feiteira, Jose F. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Escola de Engenharia

    2008-07-01

    In separation process of multicomponent systems based on phase equilibrium is essential know the phase behavior and the critical points of the system for determination and optimization of the operational conditions. The experimental apparatus presents the challenge of determine the equilibrium phase dates of a system composed by petroleum residua and supercritical solvent. The used method, named acoustic method, allows the composition identification of the phases in equilibrium also in cloudy systems as they are the systems formed by residues of crude oil. For this reason, the acoustic methodology, based on the ultra-sound technology will be used in the study of the phase equilibrium and experimental characterization of the system, in benches scale, operating in severe conditions of temperature and pressure.The acoustic method is one not invasive and not subjective technique, what becomes the work in high pressures safer. (author)

  2. L-alanine detector characterization for dosimetry of small fields in SBRT with VMAT techniques; Caracterizacao do detector de L-alanina para dosimetria de campos pequenos em SBRT com a tecnica de VMAT

    Energy Technology Data Exchange (ETDEWEB)

    Mazaro, Sarah J.; Peres, Leonardo [Instituto Nacional de Cancer (INCA), Rio de Janeiro, RJ (Brazil); Baffa, Oswaldo, E-mail: sarahmazaro@yahoo.com.br [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Departamento de Fisica

    2016-07-01

    New radiotherapy treatment techniques have some problems such as: the dosimetric and geometric of the beam and small fields. Determination of the prescribed dose on the target volume in small fields is hampered due to lack of lateral electronic equilibrium and steep dose gradient along the edges of fields. The choice of radiation better detector becomes important in the dosimetry of small fields. Alanine detector has been shown to be a good choice for measurements of high doses of radiation in small fields. This study aims to characterize the L-alanine detector through the dosimetric tests for SBRT in VMAT techniques. L-alanine response showed a strong linear correlation with the dose (R ² = 0.9865), with significant angles and dose rate dependencies (14%) and (15%) respectively, and minor with the small field size (maximum 4% deviation). (author)

  3. Study of the parameters solution blow spinning technique in the obtaining of mullite nanofibers; Estudo de parametros da tecnica de fiacao por sopro em solucao na obtencao de nanofibras de mulita

    Energy Technology Data Exchange (ETDEWEB)

    Severo, L.L.; Farias, R.M.C.; Menezes, R.R.; Santos, M.A., E-mail: lucasleite_14.1@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2016-07-01

    The Solution Blow Spinning (SBS) technique which use aerodynamic forces and has a high production rate, was created for production of nanofiber with versatile way, such as electrospinning. Therefore, the objective is to analyze the process parameters in order to optimize the production of mullite nanofiber using the SBS technique to determine the influence of air pressure, the concentration of the polymer and ejection rate in the diameter of the fibers. For this, it was used PVC as polymer in spinning, tetrahydrofuran as the solvent, HCl as acidifying, aluminum nitrate nonahydrate and tetraethylorthosilicate as precursors of mullite. The nanofibers obtained were heat treated at 1100°C. From of XRD and SEM results, it was proved the achievement of mullite nanofiber, and STATISTICA 7 software revealed that only ejection rate and the concentration influence in the average diameters of the fibers. (author)

  4. Characterization of Al{sub 2}O{sub 3}:C dosemeters for photon dosimetry using OSL technique; Caracterizacao de dosimetros de Al{sub 2}O{sub 3}:C para dosimetria de fotons utilizando a tecnica OSL

    Energy Technology Data Exchange (ETDEWEB)

    Villani, D.; Almeida, S.B.; Campos, L.L., E-mail: dvillani@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2016-07-01

    The optically stimulated dosimetry (OSL) has gained prominence in clinical and academic applications in Brazil. In this paper, we present results of the characterization OSL dosimeters Al{sub 2}O{sub 3}:C (TLD-500) manufactured by Rexon™ Components and TLD Systems in a RISØ reader, model TL/OSL-DA-20 for dosimetry of high-energy photon beams. All reader parameters, and its variations were evaluated. (author)

  5. Experiences in transferring the techniques for the economical conduction of the Mexico`s vehicular transport; Experiencias de la transferencia de las tecnicas de conduccion economica en el autotransporte en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Osorio, Francisco Javier [Comision Nacional para el Ahorro de Energia, Mexico, D. F. (Mexico)

    1997-12-31

    The Comision Nacional para el Ahorro de Energia (CONAE) (National Commission for Energy Conservation) developed the training program that through the dictation of pilot courses of technical-economical conduction of auto-motor vehicles is addressed to private enterprises, agencies and governmental institutions. This paper presents the background and the obtained results of the same. This methodology is presented in detail and a description of the courses is also presented as well as its characteristics. The comparative results are annexed of the tests between the conduction normally performed and the technical-economical conduction. The fuel saving obtained varies from 9% to 22.5%. Then, the reasons why the training in the technical- economical conduction results in one of the actions more profitable in fuel saving are explained, but also the difficulties for its implementation are also discussed. A conclusion is offered. [Espanol] La Comision Nacional para el Ahorro de Energia (CONAE) desarrollo el programa de capacitacion que a traves de la imparticion de cursos pilotos de conduccion tecnico- economica de vehiculos automotores, se dirige a las empresas privadas, dependencias e instituciones gubernamentales. En este trabajo se presentan los antecedentes y resultados obtenidos del mismo. Se detalla esta metodologia y se presenta una descripcion de los cursos y sus caracteristicas. Se anexan resultados comparativos de las pruebas entre la conduccion que se realiza normalmente y la conduccion tecnico-economica. Los ahorros de combustible obtenidos van desde 9% hasta 22.5%. Luego, se explican las razones por las que la capacitacion en conduccion tecnico-economica resulta ser una de las acciones mas rentables del ahorro de combustibles, pero tambien se discuten las dificultades para implantarla. Se ofrece una conclusion.

  6. Acceptance for clinical use of a treatment planning system with IMRT and VMAT techniques; Aceptacion para uso clinico de un sistema de planificacion de tratamientos con tecnicas de IMRT y VMAT

    Energy Technology Data Exchange (ETDEWEB)

    Serna, A.; Puchades, V.; Mata, F.

    2011-07-01

    Purpose: In this work the set of measurements and results to test the reliability of the calculated absorbed dose by our treatment planning system (Tps) for intensity modulated radiation therapy (Imr) and volumetric modulated arc therapy (Vat) is reported. Method: A set of measures was performed, both point and planar absorbed dose, selecting a set of conventional and Imr and Vat treatment fields. A gamma criteria 3 mm distance to agreement and 3% dose difference (referred to the maximum dose) was used for the planar distribution analysis, using a 10% of maximum dose as threshold. Based on this set of measures the confidence limits were calculated for the Imr and VMAT plans, and compared with the reference values given in AAPM TG119 document. Results: The average percentage deviation of point dose measures was lower than 0.5% for conventional fields and lower than 1% for IMRT and VMAT fields. Calculated confidence limits were 3.6% and 4.6% for point dose and almost zero for planar dose distributions, for IMRT and VMAT respectively. Conclusions: Our confidence levels improve significantly the AAPM TG119 reference levels both for point and planar doses, thus ensuring the reliability of the TPS performing IMRT and VMAT dose calculations. (Author) 17 refs.

  7. Aplicabilidade de Tecnicas de Clusterização e Máquinas de Vetores de Suporte para Previsão de Radiação Solar em Regiões Tropicais

    DEFF Research Database (Denmark)

    da Silva, Hendrigo Batista; Santiago, Leonardo

    A geração de energia solar terá um impacto significativo na matriz de eletricidade nos próximos anos. Assim, a previsão da radiação solar a curto prazo desempenhará um papel estratégico ao dar suporte a um grid elétrico cada dia mais conectado e intermitente. Este artigo estende para regiões...

  8. Clinical study on the removal of gingival melanin pigmentation: comparison between Nd:YAG laser ablation and mechanical abrasion; Estudo clinico comparativo entre as tecnicas de despigmentacao melanica gengival: laser neodimio (1064 nm) e gengivoabrasao

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Luis Mario de Melo

    2002-07-01

    Melanin pigmentation occurs as a result of excessive deposition of melanin, produced by the melanocytes present in the basal layer of the epithelium. This study compares clinical parameters such as inflammation and/or hemorrhage, healing process and re-pigmentation, caused by the Nd:YAG laser ablation and the mechanical abrasion of the melanin, by means of photographic images, taken during the first 30 days after the treatment. The patients comfort was monitored during the first ten days after the treatment using the method of the Visual Analog Scale to measure the pain. Six patients with gingival melanin pigmentation were selected. The left upper gingival quadrant was treated with the Nd:YAG laser using 125 mJ per pulse and 20 Hz, the right upper gingival quadrant received mechanical abrasion and the lower quadrants served for control. Both techniques did not result in inflammation and/or hemorrhage. The healing process was slower with the laser. Using mechanical abrasion, ali patients showed remaining pigmentation or re-pigmentation of varying intensity after a period of 30 days. With the laser 50 % of the patients did not show any re-pigmentation after this period. The pain analysis showed that the pain sensed 24 hours after the treatment with the laser is higher than using mechanical abrasion. (author)

  9. Phosphorus kinetics in ovine fed with different phosphorus sources, using the isotopic dilution technique; Cinetica do fosforo em ovinos suplementados com diferentes fontes fosfatadas, atraves da tecnica de diluicao isotopica

    Energy Technology Data Exchange (ETDEWEB)

    Vitti, D M.S.S.; Abdalla, A L [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil); Meirelles, C F [Sao Paulo Univ., Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz

    1992-06-01

    Phosphorus kinetics in fluids and tissues of sheep was studied. Sixteen castrated sheep were kept in metabolism cages, receiving a semipuried diet containing as phosphorus sources dicalcium phosphate (BIC), monoammonium phosphate (MAP), superphosphate (SPT) and Tapita phosphate (TAP) 200 {mu}Ci P-32 was intravenously injected in each sheep and blood and feces were collected for eight days. From the specific activities in feces and plasma the endogenous phosphorus and the absorption coefficient were calculated. plasma P-32 half-life was determined. Nine days after injection the animals were killed and liver, kidney and muscle and bone samples were collected. P-32 retention and specific activities in tissues were determined. Endogenous phosphorus and absorption coefficient values were 54.44 {+-} 15.31 mh/kg live weight and 0.60; 47.98 {+-} 12.44 and 0.56; 39.70 {+-} 7.29 and 0.49; 59.11 {+-} 17.12 and 0.58 respectively bor BIC, MAP, TAP and SPT. P-32 retention by tissues was 0.29 {+-} 0.09; 0.27 {+-} 0.06; 0.16 {+-} 0.04 and 0.08 {+-} 0.03 dose/g fresh matter, respectively for bone, liver, kidney and muscle. It was concluded that animals which received TAP showed differences in absorption, distribution and P-32 retention by fluids and tissues. Phosphorus availability was lower for this source. (author) 14 refs., 1 tab.

  10. Sub-coulombian fusion of {sup 12} C + {sup 12} C measured with the {gamma} rays improved technique; Fusion sub-coulombiana de {sup 12} C + {sup 12} C medida con la tecnica de rayos- {gamma} mejorada

    Energy Technology Data Exchange (ETDEWEB)

    Rosales M, P

    2005-07-01

    In this work we report the measurements carried out in the National Institute of Nuclear Research of Mexico (ININ) for the absolute section of fusion of the system {sup 12} C + {sup 12} C in an interval of energy of E{sub c.m.} 4.5-6.5 MeV with fine steps of 75 keV. The objective of measuring in fine steps is to register all the existent resonances. To be able to obtain an absolute normalization of the cross section, it was applied a method that allows to measure simultaneously the one number of projectiles that arrive to the target, as well as the numbers of nuclei in the target, even when this doesn't stay constant. In the chapter 2 the experimental procedure it is described, it is carried out with detail the analysis of the data and the results are shown. Later on the chapter 3 it is described with detail the method used for the absolute normalization, that is to say the form of obtaining the quantities N{sub p} and {eta}{sub T} of the equation is explained and the obtained results are presented. Additionally in the chapter 4 it was carried out a theoretical analysis applying models as that of barrier penetration and the optical model combined with the Breit-Wigner theory with the purpose of being able to reproduce the resonances of the excitation function. In the chapter 5 the concept of S-Astrophysicist factor it is introduced and this value is calculated for our data. Finally in the chapter 6 the conclusions of this work are presented. (Author)

  11. Synthesis and characterization of SnO2 doped with fluorine by the technique of polymeric precursors; Sintese e caracterizacao de SnO2 dopado com fluor pela tecnica dos precursores polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Gilberto J.; Lopes, Rafael Ialago, E-mail: gilbertop@fei.edu.br [Centro Universitario FEI, Sao Bernardo do Campo, SP (Brazil). Departamento de Engenharia de Materiais

    2016-07-01

    The present work deals with the synthesis of tin dioxide powders doped with fluorine and chlorine anions to evaluate the influence of these on the physico-chemical properties of SnO2, as well as to verify if the dopant does not make a solid solution with the material and its possible use as sintering additive. The samples were synthesized by Pechini method (polymer precursors) with tin oxalate as a source not contaminated with chlorine of this metal. Specific surface area characterization (BET method) and X-ray diffractometry (XRD) show that doping reduces the particle size of SnO2, being more effective at lower dopant levels. The dilatometry of the doped powders shows a reduction in the beginning and end temperatures of the sintering of the tin dioxide when compared with values in the literature.

  12. Design of a technique for the radiotherapy treatment of patients of prostate with bilateral prosthetic hip; Diseno de una tecnica para el tratamiento radioterapico de pacientes de prostata con protesis bilateral de cadera

    Energy Technology Data Exchange (ETDEWEB)

    Camacho, C.; Perez-Alija, J.; Olivares, S.; Loscos, S.; Pedro, A.

    2013-07-01

    The design of the plan of treatment of patients who have to undergo radical radiotherapy of prostate and that incorporate some sort of hip prosthesis is usually complex. the case of a patient's prostatic bed with bilateral hip prosthesis to assess radical radiotherapy to the 70Gy in bed. The objective of this paper is to present the chosen technique designed for this treatment. (Author)

  13. Model of spatial analysis of electric power market using the Fuzzy C-Means technical classification; Modelo de analise espacial de mercado de energia eletrica utilizando a tecnica de classificacao Fuzzy C-Means

    Energy Technology Data Exchange (ETDEWEB)

    Neto, J.C. [Companhia Energetica de Goias (CELG-D), Goiania, GO (Brazil)], E-mail: joao.cn@celg.com.br; Lima, W.S. [Votorantim Siderurgia, Resende, Rio de Janeiro, RJ (Brazil). Gerencia Geral de Tecnologia], E-mail: wagner.lima@vmetais.com.br

    2009-07-01

    The power distribution companies live with an antagonistic reality: an increasing energy demand, due to steady economic and population growth, and a limitation on their financial resources to expand its network. Therefore, it is essential an improvement in activity of planning of the power distribution system trying to improve the application of available resources. In this context fits the application of Geographic Information System combined with clustering techniques and classification in order to enhance the planning process, giving the planner a more complete picture of the consumer market by the distributor. This paper presents a system that makes use of Geographic Information System combined with the technique of clustering and classification Fuzzy C-Means, with the aim of analyzing the distribution of network load and the performance of the technique. Each group performed leads to a spatial representation (scenario). This, together with an index measuring the performance of the group (intra-group and inter-group) implemented in this work, provides a favorable environment for spatial analysis of the electric power market.

  14. Thin film growing by the laser ablation technique: possibilities for growing of dosimetric materials; Crecimiento de capas delgadas por la tecnica de ablacion laser: posibilidades para crecimiento de materiales dosimetricos

    Energy Technology Data Exchange (ETDEWEB)

    Rojas R, E.M.; Melo M, M.; Enriquez Z, E.; Fernandez G, M.; Haro P, E.; Hernandez P, J.L. [UAM-I, Laboratorio de Optica Cuantica, 09340 Mexico D.F. (Mexico)

    2005-07-01

    In this talk we will present the basics about the laser ablation technique and how it is used for thin film growing, either as a single film or a stack of thin films, as well as some methods to characterize in real time the film thickness. Finally, we will discuss the possibilities of using laser ablation for growing thin films with applications to dosimetry. (Author)

  15. El espacio abierto: una tecnica didactica facilitadora del desarrollo de competencias generales en la formacion profesional superior The open space: a facilitating didactic technique in the development of genereral competences in higher education

    Directory of Open Access Journals (Sweden)

    Alejandro Villalobos Claveria

    2009-11-01

    Full Text Available El propósito principal del presente artículo es demostrar que el Espacio Abierto (Open Space como técnica investigativa puede ser un adecuado procedimiento didáctico para el desarrollo de competencias genéricas (transversales en la formación profesional superior. Para alcanzar dicho propósito, en primer lugar, se describe el Espacio Abierto como la técnica investigativa y la información requerida para su aplicación. En segundo lugar, se presenta una propuesta de aplicación ya validada con un conjunto de académicos de dos universidades regionales, para su eventual utilización en las aulas universitarias. El presente trabajo se centra en los resultados preliminares del proyecto Fondecyt Nº 1070466: "La construcción del sujeto docente universitario en universidades regionales: Factores claves en su desempeño académico y profesional", financiado por el gobierno de Chile, en la línea Conicyt/Fondecyt. Estudio que pretende caracterizar factores claves que definen la profesión docente universitaria en instituciones de enseñanza superior regionales para el diseño de una propuesta de perfeccionamiento de académicos e investigadores en docencia superior.The main goal of this article is to demonstrate that the Open Space as a research technique can be a suitable didactic procedure for the development of general competences (cross-sectional in higher education. In order to reach this goal, we begin by describing the Open Space as a research technique as well as the information required for its application. Secondly, an application proposal is presented, which has been previously validated by a group of professors from two regional universities. This proposal is intended to be used in university classrooms when possible. This study focuses on the preliminary results of Fondecyt Project Nº 1070466: "The education of the university professor in regional universities: Key factors in their academic and professional performance", financed by the government of Chile, along the Conicyt/Fondecyt lines. This study tries to characterize key factors that define the university teaching profession in regional higher education institutions and later on to design an improvement proposal for professors and researchers in higher education.

  16. Corrosion mapping in ducts using the automated ultrasonic technique C-Scan - correlation with results given by pig inspection; Mapeamento de corrosao em dutos atraves da tecnica ultrassonica C-Scan

    Energy Technology Data Exchange (ETDEWEB)

    Feres Filho, Pedro; Moura, Nestor Carlos de [Physical Acoustics South America (PASA), Sao Paulo, SP (Brazil)

    2005-07-01

    In-service inspection has received diverse contributions from technologies and documents with the objective of maximizing equipment availability and minimizing inadequate repairs. Amongst the available technologies, there are the automated ultrasound tests, in the B and C-scan versions. This paper describes an evaluation methodology based on the correlation between the test techniques of instrumented electromagnetic PIG and automated ultrasound, both applied with the purpose of detecting and mapping areas with corrosion in pipes for oil transport. The main objective of the application of the C-scan methodology, in this case, was the measuring and detailing of the corroded area, thus providing an adequate maintenance plan through the substitution or installation of a double gutter. The result demonstrates the correlation between the measurements taken by the PIG and the sizing of the regions done using the C-scan method, consisting of the length, width and thickness values in the points affected by the corrosion. (author)

  17. Implementation of the technique of partial irradiation accelerated the breast with high doses (HDR) brachytherapy; Puesta en marcha de la tecnica de irradiacion parcial acelerada de la mama con braquterapia de alta tasa de dosis (HDR)

    Energy Technology Data Exchange (ETDEWEB)

    Molina Lopez, M. Y.; Pardo Perez, E.; Castro Novais, J.; Martinez Ortega, J.; Ruiz Maqueda, S.; Cerro Penalver, E. del

    2013-07-01

    The objective of this work is presents procedure carried out in our Centre for the implementation of the accelerated partial breast irradiation (APBI, accelerated partial-breast irradiation) with high-rate brachytherapy (HDR), using plastic tubes as applicators. Carried out measures, the evaluation of the dosimetric parameters analyzing and presenting the results. (Author)

  18. Stability Study of Filtering Techniques in Pictures of mini-MIAS Database; Estudio de Estabilidad de Tecnicas de Filtrado en Imagenes de la Base de Datos mini-MIAS

    Energy Technology Data Exchange (ETDEWEB)

    Parcero, E.; Vidal, V.; Verdu, G.; Mayo, P.

    2014-07-01

    The study of filtering techniques applied to medical imaging is particularly important because it can be decisive for an accurate diagnosis. This work aims to study the stability of Fuzzy Peer Group Averaging filter when applied to mammographic images of different nature in relation to the type of tissue abnormality found and diagnosis. The results show that the filter is effective, because obtained a PSNR value of 27 by comparing the filtered image with the original, and a value of 17 by comparing the filtered image with contaminated with noise. Also show that the filter will behave properly regardless of the image characteristics. (Author)

  19. Study of indicators aggregation techniques for the selection of a new nuclear reactor for Mexico; Estudio de tecnicas de agregacion de indicadores para la seleccion de un nuevo reactor nuclear para Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Barragan M, A.M.; Martin del Campo M, C. [UNAM, Facultad de Ingenieria, 04510 Mexico D.F. (Mexico)]. e-mail: ale_bar_m@yahoo.com.mx

    2007-07-01

    A study on several aggregation techniques that can be used as multi criteria analysis methods, like important part of the methodology developed for the selection of a nuclear reactor for Mexico is described. In an arbitrary way three reactors were selected to be compared, these they are the AP1000 (Advance Passive from 1000 MWe), the PBMR (Pebble Bed Modular Reactor) and the GT-MHR (Gas Turbine Modular Helium). The evaluation approaches were classified in three categories: Economic, Socio-political and of safety and environment. In each category they were defined the more important evaluation indicators and then it was built a matrix with those values of each reactor. The four studied aggregation methods are described: Normalization, Linear deliberation, Fuzzy Logic and AHP (Analytic Hierarchy Process). The well-known aggregation mechanisms are those that are obtained of the lineal deliberation and of the normalization, which have demonstrated to give good results before the simplicity of their use. The fuzzy logic has the advantage that it allows to manage qualitative and quantitative information simultaneously without the aggregation problems that are presented since in a conventional system the semantic pattern on that is based, it is provided by the theory of the diffuse groups that has demonstrated in other areas of the knowledge a better approach to the reality, when admitting that the nature has shades and that the decisions take in function of a wide range of possibilities and of approaches in contradictory occasions or in conflict, all equally worth. The Analytic Hierarchical Process (AHP) that consists in formalizing the intuitive understanding of a multi criteria complex problem, by means of the construction of a hierarchical model that allows the decision agent to structure the problem in visual form, giving him the form of a hierarchy of attributes (global objective of the problem, approaches and alternative). Finally, using the matrix of initiators the application of the four methods was made to obtain the global qualification of each reactor, which integrates the entirety of evaluation indicators. (Author)

  20. Monte Carlo techniques for the study of cancer patients fractionation in head and neck treated with radiotherapy; Tecnicas de Monte Carlo para el estudio del fraccionamiento en pacientes de cancer de cabeza y cuello tratados con radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Carrasco Herrera, M. A.; Jimenez Dominguez, M.; Perucha Ortega, M.; Herrador Cordoba, M.

    2011-07-01

    The dose fractionation than the standard head and neck cancer in some situations involve a significant increase of local control and overall survival. There is clinical evidence of these results in case of hyperfractionated treatments, although the choice of optimal fractionation generally is not obtained from the results of any model, in this study has provided the tumor control probability (TCP) for various subdivisions modified (hypo fractionated and hyperfractionated) using Monte Carlo simulation techniques.

  1. Application of hyper spectral imagings techniques to study soil degradation in arid environments. (Los Monegros, Spain); Aplicacion de tecnicas hiperespectrales de imagen al estudio de la degradacion de suelos en ambientes aridos (Los Monegros, Espana)

    Energy Technology Data Exchange (ETDEWEB)

    Gumuzzio Such, A.; Palacios Orueta, A.; Schmid, T.; Dominguez, J. A.; Gumuzzio, J.

    2009-07-01

    The aim of this work is to identify characteristics associated to soils affected by degradation within and arid area of Spain using optical hyper spectral airborne data. The methodological approach was developed to determine the spatial distribution of selected soils affected by degradation processes. A satisfactory spatial distribution is obtained where the corresponding soil characteristics are closely related to degradation processes. (Author) 2 refs.

  2. 18. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 18. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicos. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    Selected papers from the 18th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, CONAE, and FIDE.

  3. Energy analysis of the production process of sugar using modern technologies of process integration; Analisis energetico del proceso de produccion del azucar utilizando tecnicas modernas de integracion de proceso

    Energy Technology Data Exchange (ETDEWEB)

    Figueroa Ibarra, Luis; Arriola Medellin, Alejandro [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    The application of new concepts for the energy analysis of industrial processes, which consider the thermal integration of the process equipment, not only allows to detect energy recovery potentials that cannot be visualized with the traditional treatment of energy diagnosis of individual equipment, allows in addition, to suggest changes in the operation of the process that, without modifying the production, result in the reduction of the consumption of energy by the services and fuel. The analysis of thermal integration is illustrated for the case of a sugar mill, detecting a reduction potential in the use of fuel oil of 75%, and a potential increase of electrical production by cogeneration of 41%, departing from the modification of the use of the steam available in the process, and of the change of operation parameters of operation in the evaporation section. [Spanish] La aplicacion de nuevos conceptos para el analisis energetico de procesos industriales, los cuales consideran la integracion termica de los equipos del proceso, no unicamente permiten detectar potenciales de recuperacion de energia que no se pueden visualizar con el tratamiento tradicional de diagnostico energetico de equipos individuales, permiten ademas, sugerir cambios en la operacion del proceso que, sin modificar la produccion, redundan en una reduccion del consumo de servicios y combustible. El analisis de la integracion termica se ilustra para el caso de un ingenio azucarero, detectandose un potencial de reduccion del uso de combustoleo de 75%, y un potencial de incremento de produccion electrica por cogeneracion de 41%, a partir de la modificacion del uso del vapor disponible en el proceso, y del cambio de parametros de operacion en la seccion de evaporacion.

  4. Analysis of the chemical elements behavior in leaves infected with fumagina employing X-ray fluorescence technique; Analise do comportamento de elementos quimicos em folhas infectadas com fumagina atraves da tecnica de fluorescencia de raios-X

    Energy Technology Data Exchange (ETDEWEB)

    Blonski, Maria Selia

    2002-02-01

    Fumagina is produced by the Capnodium fungi, a mushroom from Dothideales order, that lives associated with the yellow aphid (Monelliopsis pecanis), excreting a heavy load of a sugared substance that provides the sooty fungus development, covering, in some cases the totality, of leaves, fruits and branches surfaces. One of the big problems caused by this disease is the physic photosynthesis stuckness, reducing in 98% the active photosynthesis radiation and in 70% the net photosynthesis. This photosynthesis reduction affects the plants carbohydrate reservoirs, resulting in reduced and bad qualified crops. It was employed the Energy Dispersion X-Ray Fluorescence Technique (EDXRF) to study the fumagina disease. The measurements were realized with infected and healthy leaves of citric plants (orange and lemon trees), collected at the Farm School of the State University of Londrina, and also leaves of icsora plant from Piracicaba-SP. Through this technique it was observed a metabolic disorder related to Fe and Ca elements. By comparing the EDXRF spectra of the healthy plant leaves with the infected ones, it was verified that the concentration of Ca is higher than the concentration Fe in leaves of healthy plants, while for the leaves of plants infected with fumagina, it was observed a higher concentration of Fe. Employing EDXRF and the emission/transmission method for the matrix effect correction, samples of the citric plants were also analysed in pellet. The elements K, Ca, Ti, Mn , Fe, Cu and Zn were quantified. It was verified a higher Fe concentration in fumagina samples compared to the samples without fumagina. For all the elements of interest the minimum level of detection found was at the order of {mu}g g{sup -1}. (author)

  5. Energetic use of biogas from sanitary landfill in Brazil: a technical feasibility study, economic and environmental; Do aproveitamento energetico do biogas em aterros sanitarios no Brasil: um estudo de viabilidade tecnica, economica e ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Abreu, Fabio Viana de [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    Power generation through biogas in landfills is a production of clean and renewable energy in order to minimize the global impacts generated by the burning of municipal solid waste. In this article, the operational conditions of biogas are defined, and analyzed the appropriate areas and minimum flow of biogas, in m{sup 3}/h, to enable this type of project. The most significant environmental contribution of this project is to reduce emissions of greenhouse gases (GHG), by converting the methane into carbon dioxide. According to the Clean Development Mechanism (CDM), called developed countries can buy carbon credits from developing countries to meet their environmental goals. This alternative of raising revenue is one of the objects of this study. Are studied energy conversion technologies, with analysis of the best alternative for the conversion of landfill biogas energy. Comparative studies are presented and the results showed that the generating sets, using internal combustion engines (Otto or Diesel cycles) are more viable both technically and economic bias for energy conversion of landfill gas in Brazil through thermoelectric units.

  6. Esplenectomia e ligadura da veia gástrica esquerda na esquistossomose mansônica: efeito sobre a pressão das varizes de esôfago aferida por tecnica não-invasiva

    Directory of Open Access Journals (Sweden)

    Claudio Moura Lacerda

    Full Text Available Em ambos os hospitais universitários de Pernambuco, o tratamento de escolha para portadores de esquistossomose hepatoesplênica (EHE com antecedente de hemorragia digestiva alta (HDA por rotura de varizes de esôfago (VE é a esplenectomia associada à ligadura da veia gástrica esquerda (ELGE; porém, o impacto desta cirurgia sobre a pressão das VE, provavelmente, o parâmetro que melhor se correlaciona com o risco de recidiva hemorrágica, ainda não foi estudado. Com a introdução, em nosso meio, de técnica não-invasiva de medição da pressão das VE, isto tornou-se possível, com mínimos riscos, tomando-se o objetivo do presente estudo. A ELGE foi empregada em vinte portadores de EHE com antecedentes de HDA. A pressão das VE foi medida através do método endoscópico não-invasivo do balão pneumático, antes da cirurgia, e estes valores comparados com novas medições realizadas cinco a oito dias após. A pressão nas VE no pré-operatório variou entre 20,0 e 28,7mmHg (média de 24,35± 2,36 mmHg. Não houve correlação da pressão com o calibre das VE. No pós-operatório (PO, observou-se uma queda significante na pressão das VE, que variou entre 14,6 e 21,5 mmHg (média 17,29± 1,75 mmHg, p<0,001. Os resultados do presente trabalho confirmam as idéias que fundamentam a indicação da ELGE em portadores de EHE com antecedente de HDA. Esta cirurgia determina, pelo menos a curto prazo e na ampla maioria dos casos, uma redução na pressão das VE reduzindo o risco de recidiva de HDA.

  7. Aqueous immersion technique for the irradiation with photons Kaposi's sarcoma multiple foot and ankle; Tecnica de inmersion acuosa para la irradiacion con fotones del sarcoma de Kaposi multiple en pies y tobillos

    Energy Technology Data Exchange (ETDEWEB)

    Velazquez Miranda, S.; Munoz Carmona, D. M.; Ortyiz Seidel, M.; Gomez-Millan Barrachina, J.; Delgado Gil, M. M.; Ortega Rodriguez, M. J.; Dominguez Rodriguez, M.; Marquez Garcia Salazar, M.; Bayo Lozano, E.

    2011-07-01

    Classic Kaposi sarcoma presents as asymptomatic red-violaceus plaques, usually on the legs below the knees, ankles and soles preferentially. When the disease is spread on the skin preferential treatment is radiation therapy at low doses. Homogeneous irradiation of the various lesions could be very complex due to the irregular geometry of the feet, interdigital lesions on different planes. To overcome this problem, and in the case of disseminated disease and low doses, we propose the technique of dipping the tip in Cuba expanded polystyrene filled with saline with a methacrylate plate 2 cm in depth and irradiation with parallel opposed fields.

  8. Techniques of artificial intelligence applied to the electric power expansion distribution system planning problem; Tecnicas de inteligencia artificial aplicadas ao problema de planejamento da expansao do sistema de distribuicao de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Froes, Salete Maria

    1996-07-01

    A tool named Constrained Decision Problem (CDP), which is based on Artificial Intelligence and a specific application to Distribution System Planning is described. The CDP allows multiple objective optimization that does not, necessarily, result in a single optimal solution. First, a literature review covers published works related to Artificial Intelligence applications to Electric Power Distribution Systems, emphasizing feeder restoration and reconfiguration. Some concepts related to Artificial Intelligence are described, with particular attention to Planning and to Constrained Decision Problems. Following, an Electric Power System planning model is addressed by using the CDP tool. Some case studies illustrate the Distribution Planning model, which are compared with standard optimization models. Concluding, some comments establishing the possibilities of CDP applications are followed by a view on future developments. (author)

  9. Development of ultrasonic technique for measure of porosity of UO{sub 2} pellets; Desenvolvimento de tecnica ultra-sonica para medida de porosidade em pastilhas de UO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Baroni, Douglas Brandao

    2008-07-01

    The characterization of nuclear fuel is of great importance to guarantee the efficiency and even the safety in the power stations. At present, the techniques used implicate elevated costs with equipment, materials and installations of radiological protection. Besides, because of being destructive techniques, they impose that the checking of the characteristics of this material is done by sampling. In this work a not destructive technique was developed for measures of porosity in ceramic materials with efficiency and precision. The objective of this work is to this technique will be able to be used in laboratory practice for measures in UO{sub 2} pellets, so it would become viable the inspection of up to 100% of the nuclear fuel, guaranteeing bigger control of the characteristics of the used material, turning in increasing safety, efficiency and economy. The innovation of the technique is due to the fact of analysing the specter of frequency of the ultrasonic wrist, and not his time of course in the material, frequently used. In this work 40 ceramic pellets of alumina were used with values of porosity between 5,09% and 37,30%. A system of recognition of signs using artificial neural networks made possible to distinguish pellets with differences of porosity of 0,04%. It was observed that this technique can be used for several others aims, for example, in the determination of the void fraction in regimen of two-phase flow, what is very important to guarantee the efficiency and safety of nuclear reactors. (author)

  10. In vitro evaluation of the chemical and morphological changes of the enamel surface using different bleaching techniques; Avaliacao in vitro das alteracoes quimica e morfologica da superficie do esmalte utilizando diferentes tecnicas de clareamento dental

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Alessandra de Siervi

    2003-07-01

    'In vitro' evaluation through MEV and EDS of the morphological and chemical changes, respectively, of the bovine enamel, submitted to different bleaching techniques. For the MEV evaluation eighteen apical thirds were pigmented and divided into two parts. One half of each sample was the control and the other half was bleached according to the protocol of each test group (n= 6). Group I - home bleaching with a 10% carbamide peroxide; group II bleaching with 35% hydrogen peroxide and LED; group III - bleaching with 35% hydrogen peroxide with diode laser bleaching. The same procedure was done with the eighteen samples which were analyzed through EDS and which had their buccal surface grinded and polished before the bleaching procedure in order to obtain more precise values of the fraction of calcium and phosphorus. The results showed no morphological changes among the analyzed control halves and the bleached halves. There was not a statistical significant difference about Ca and P values, among the control halves and the bleached halves regarding the chemical components (p< 0,05). (author)

  11. Study of the mechanical properties of welded joints by wet sub sea welding technique with tubular electrode; Estudo das propriedades mecanicas de juntas soldadas pela tecnica de soldagem subaquatica molhada com eletrodo tubular

    Energy Technology Data Exchange (ETDEWEB)

    Teichmann, Erwin Werner; Baixo, Carlos Eduardo Iconomos; Dutra, Jair Carlos [Santa Catarina Univ., Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica. Lab. de Soldagem e Mecatronica - LABSOLDA]. E-mail: erwin@labsolda.ufsc.br; Santos, Valter Rocha dos [Centro Federal de Educacao Tecnologica (CEFET), Rio de Janeiro, RJ (Brazil); Teixeira, Jose Claudio [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    1997-07-01

    Some experiments conducted at LABSOLDA/UFSC - a welding laboratory of Santa Catarina Univ., Florianopolis, Brazil - in order to identify mechanical properties, weld bead geometry and the quantity and dimensions of pores in weld beads produced by sub sea wet FCAW are described. Welding in shallow water with power source adjusted to operate in constant current characteristic mode and a set of parameters to establish an open arc transfer mode it was obtained weld beads with regular geometry and an acceptable profile, with low level of defects incidence, no pores and crack free. The tenacity measured by Charpy tests (0C) was 34 J and hardness of 119 HV-10 measured by Vickers tests. The methodology used in the experiments and the results obtained are discussed in the paper. (author)

  12. Regulatory aspects of the medical and occupational exposures in the application of the radiosynoviortesis technique; Aspectos regulatorios de las exposiciones medicas y ocupacionales en la aplicacion de la tecnica de radiosinoviortesis

    Energy Technology Data Exchange (ETDEWEB)

    Dumenigo G, C.; Fuente P, A. de la; Quevedo G, J.R.; Lopez F, Y. [Centro Nacional de Seguridad Nuclear, Calle 28 No. 504 e/5 y 7 Ave. Miramar, Playa, Ciudad de la Habana (Cuba)]. e-mail: cruz@orasen.co.cu

    2006-07-01

    The Radiosynoviortesis is a to therapeutic proceed that consists in the injection of a radiopharmaceutical beta transmitter in the synovial cavity of the articulations affected by arthropaties. With it is achieved to cause the fibrosis and remodeling of the synovial membrane obtaining a remarkable improvement in the patients that it includes the disappearance of the pain and the increase of the flexibility of the treated articulation. The technique began to be carried out from 1952 in Europe when it was injected Au{sup 196} in patients affected by rheumatoid arthropaties and starting from then it has gone winning followers in Canada, United States, Australia and some countries of Latin America. Their results are satisfactory and they have been endorsed by the practice. In Cuba it was carried out at November 16, 2002 a clinical essay with the use of this technique, the same one was Graduate by the National Center of Nuclear Safety, in their condition of Regulatory Authority, for it the National Institute of Hematology and Immunology presented the technical documentation that bases its safety. However for the generalization of this technique and their inclusion in the Nuclear Medicine services already existent, the Regulatory Authority has indicated a group of requirements that should be kept in mind in a such way that the application of the Radiosynoviortesis fulfills the Regulation of those 'Basic Norms of Radiological Safety' effective in our country. The present work exposes the particularities and challenges that the Radiosynoviortesis outlines from the point of view of the Radiological Protection, as well as the technical aspects that should be kept in mind for its Licensing, in such way that the is guaranteed safety of the same one in the relative thing to the radiological protection of the patients, those workers and the one publishes. The work reaffirms the feasibility of this to therapeutic proceed from the point of view of the radiological protection, proposing a group of practical actions that allow to guarantee the radiological safety. (Author)

  13. 13. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 13. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-31

    Selected papers from the 13th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE and FIDE.

  14. Technical evaluation of biomass gasification technology integrated with combined cycle using bagasse as fuel; Avaliacao tecnica da tecnologia de gaseificacao de biomassa integrada a ciclos combinados utilizando bagaco como combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Pablo Silva; Venturini, Osvaldo Jose; Lora, Electo Silva [Universidade Federal de Itajuba (NEST/UNIFEI), MG (Brazil). Nucleo de Excelencia em Geracao Termeletrica e Distribuida], email: pablo.silvaortiz@gmail.com; Campo, Andres Perez [Universidade Automona de Bucaramanga (UNAB) (Colombia). Fac. de Engenharia Fisico- Mecanica, Engenharia em Energia

    2010-07-01

    Biomass Integrated Gasification Combined Cycle (BIGCC) was identified as an advanced technology with potential to be competitive for electricity generation. The BIGCC technology uses biomass and the sub products of some industrial sectors processing, like sugar cane, as feedstock. The current Brazilian energy matrix is mainly based on renewable generation sources, making it important to assess these gasification technologies in the production of sugar, ethanol and electricity. In this work, a technical evaluation of the technologies incorporated in BIGCC power plants is done: the gasification process and the combined cycle power plant. On the other hand, the generated costs of these systems are analyzed, and the potential for implementation in Brazil plants from sugar cane bagasse is studied, in which a 10% increase in efficiency is obtained. (author)

  15. Determination of silver, gold, zinc and copper in mineral samples by various techniques of instrumental neutron activation analysis; Determinacion de plata, oro, zinc y cobre en muestras minerales mediante diversas tecnicas de analisis por activacion de neutrones instrumental

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez R, N. I.; Rios M, C.; Pinedo V, J. L. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico); Yoho, M.; Landsberger, S., E-mail: neisla126@hotmail.com [University of Texas at Austin, Nuclear Engineering Teaching Laboratory, Austin 78712, Texas (United States)

    2015-09-15

    Using the method of instrumental neutron activation analysis, mineral exploration samples were analyzed in order to determine the concentrations of silver, gold, zinc and copper; these minerals being the main products of benefit of Tizapa and Cozamin mines. Samples were subjected to various techniques, where the type of radiation and counting methods were chosen based on the specific isotopic characteristics of each element. For calibration and determination of concentrations the comparator method was used, certified standards were subjected to the same conditions of irradiation and measurement that the prospecting samples. The irradiations were performed at the research reactor TRIGA Mark II of the University of Texas at Austin. The silver concentrations were determined by Cyclical Epithermal Neutron Activation Analysis. This method in combination with the transfer pneumatic system allowed a good analytical precision and accuracy in prospecting for silver, from photo peak measurement 657.7 keV of short half-life radionuclide {sup 110}Ag. For the determination of gold and zinc, Epithermal Neutron Activation Analysis was used, the photo peaks analyzed corresponded to the energies 411.8 keV of radionuclide {sup 199}Au and 438.6 keV of metastable radionuclide {sup 69m}Zn. On the other hand, copper quantification was based on the photo peak analysis of 1039.2 keV produced by the short half-life radionuclide {sup 66}Cu, by Thermal Neutron Activation Analysis. The photo peaks measurement corresponding to gold, zinc and copper was performed using a Compton suppression system, which allowed an improvement in the signal to noise relationship, so that better detection limits and low uncertainties associated with the results were obtained. Comparing elemental concentrations the highest values in silver, zinc and copper was for samples of mine Tizapa. Regarding gold values were found in the same range for both mines. To evaluate the precision and accuracy of the methods used, various geological reference materials with satisfactory results according to the certified values were analyzed. (Author)

  16. Comparison of analysis techniques by liquid scintillation and Cerenkov Effect for {sup 40}K quantification in aqueous samples; Comparacion de las tecnicas de analisis por centelleo liquido y efecto Cerenkov para la cuantificacion {sup 40}K en muestras acuosas

    Energy Technology Data Exchange (ETDEWEB)

    Miranda C, L.; Davila R, J. I.; Lopez del R, H.; Mireles G, F., E-mail: lilimica20@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico)

    2015-09-15

    In this work the counting by liquid scintillation and Cerenkov Effect to quantify {sup 40}K in aqueous samples was used. The performance of both techniques was studied by comparing the response of three commercial liquid scintillation OptiPhase HiSafe 3, Ultima Gold Ab and OptiPhase TriSafe, the vial type and presentation conditions of the sample for counting. In liquid scintillation, the ability to form homogeneous mixtures depended on the ionic strength of the aqueous solutions. The scintillator OptiPhase HiSafe 3 showed a greater charge capacity for solutions with high ionic strength (<3.4), while the scintillator OptiSafe TriSafe no form homogeneous mixtures for solutions of ionic strength higher than 0.3. Counting efficiencies for different proportions of sample and scintillator near 100% for the scintillators OptiSafe HiSafe 3 and Ultima Gold Ab were obtained. In the counting by Cerenkov Effect, the efficiency and sensitivity depended of the vial type; polyethylene vials were more suitable for counting that the glass vials. The sample volume had not significant effect on counting efficiency, obtaining an average value of 44.8% for polyethylene vials and 37.3% for glass vials. Therefore, the liquid scintillation was more efficient and sensitive for the measurement of {sup 40}K in aqueous solutions. (Author)

  17. The Study of Mining Activities and their Influences in the Almaden Region Applying Remote Sensing Techniques; Estudio de la Influencia de las Actividades Mineras de Mercurio en la Comarca de Almaden Aplicando Tecnicas de Teledeteccion

    Energy Technology Data Exchange (ETDEWEB)

    Rico, C; Schmid, T; Millan, R; Gumuzzio, J

    2010-11-17

    This scientific-technical report is a part of an ongoing research work carried out by Celia Rico Fraile in order to obtain the Diploma of Advanced Studies as part of her PhD studies. This work has been developed in collaboration with the Faculty of Science at The Universidad Autonoma de Madrid and the Department of Environment at CIEMAT. The main objective of this work was the characterization and classification of land use in Almaden (Ciudad Real) during cinnabar mineral exploitation and after mining activities ceased in 2002, developing a methodology focused on the integration of remote sensing techniques applying multispectral and hyper spectral satellite data. By means of preprocessing and processing of data from the satellite images as well as data obtained from field campaigns, a spectral library was compiled in order to obtain representative land surfaces within the study area. Monitoring results show that the distribution of areas affected by mining activities is rapidly diminishing in recent years. (Author) 130 refs.

  18. IAEA Capacity Building in Nuclear Techniques for Environmental Sustainability; Asistencia del OIE A en la creacion de capacidad para el empleo de tecnicas nucleares en aras de la sostenibilidad ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Dixit, Aabha [International Atomic Energy Agency, Division of Public Information, Vienna (Austria)

    2013-09-15

    The IAEA helps Member States use nuclear technology for a broad range of applications: from generating electricity to increasing food production, from fighting cancer to managing freshwater resources and protecting coastal areas and the ocean. Assistance provided through IAEA capacity building projects addresses specific national and regional problems. Expertise in the application of nuclear technology and knowledge of good practices are transferred via training activities, information exchange, coordinated research projects and the technical cooperation programme.

  19. Recommendations of technical specifications for ethanol and its blends (E6) and the infrastructure for their management in Mexico; Recomendaciones de especificaciones tecnicas para el etanol y sus mezclas (E6) y la infraestructura para su manejo en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-15

    This paper describes the importance and benefits of using ethanol-gasoline blend as a substitute for pure gasoline. It presents data of global ethanol market, as well as major producers, processes involved for different raw materials and productivity indicators. It discusses the main properties to be monitored in ethanol and the importance of each one. It also examines the impact of the addition of ethanol in automotive gasoline and the influence of each property in the operation of the cars and the environment. It presents an assessment of the international specifications anhydrous ethanol used in the United States, Brazil and the European Union as well as suggestions for limits harmonization of the main parameters and methodologies, from recently published studies (White Paper-Bioetahnol Guidelines Task Force and to Ethanol from Worldwide Fuel Charter Committee). It includes the specification of Brazilian gasoline, added with 25% of ethanol (E25). It suggests an anhydrous ethanol specification and a specification for gasoline mixtures / ethanol E6 for implementation in Mexico. It presents a prioritization of laboratory testing methods for ethanol and ethanol-blended gasoline in three categories, indicating the most appropriate test to be used at different points in the distribution chain of products. It discusses the impact of ethanol on the distribution facilities for fuels, actions to control potential problems, selection of materials and equipment, safety procedures and presents the mixing gasoline / ethanol. It also describes the Brazilian system of production / distribution of fuels and the experience of this country to control fuel quality from the legislation. It includes a table with the top teams, their costs, Brazilian suppliers and a list of Brazilian standards for fuel storage and transport. Finally, we present some suggestions that may be important to ensure the evolution of specifications of ethanol and ethanol-blended gasoline in the course of the next few years in Mexico. [Spanish] Este documento describe la importancia y los beneficios del uso de la mezcla bioetanol-gasolina como sustituto de la gasolina pura. Presenta datos del mercado mundial de etanol, asi como de los principales productores, procesos involucrados para diferentes materias primas e indicadores de productividad. Discute las principales propiedades a ser monitoreadas en el etanol y la importancia de cada una. Tambien revisa el impacto de la adicion de etanol en las gasolinas automotrices y la influencian de cada propiedad en el funcionamiento de los automoviles y el medio ambiente. Presenta un diagnostico de las especificaciones internacionales del etanol anhidro usadas en los Estados Unidos, Brasil y la Union Europea, asi como sugerencias de armonizacion para los limites de los principales parametros y para las metodologias, a partir de estudios publicados recientemente (White Paper- Bioetahnol Task Force y Guidelines to Ethanol from Worldwide Fuel Charter Committee). Incluye la especificacion de las gasolinas brasilenas, adicionadas con un 25% de etanol (E25). Sugiere una especificacion de etanol anhidro, asi como una especificacion para mezclas gasolina/etanol E6 para su implementacion en Mexico. Presenta una priorizacion de los metodos de prueba de laboratorio para el etanol y la gasolina mezclada con etanol en tres categorias, indicando las pruebas mas adecuadas para ser usados en diferentes puntos de la cadena de distribucion de los productos. Discute el impacto del etanol en las instalaciones de distribucion de los combustibles, acciones para el control de posibles problemas, seleccion de materiales y equipamiento, presenta procedimientos de seguridad y el proceso de mezcla gasolina/etanol. Describe tambien el sistema brasileno de produccion/distribucion de combustibles y la experiencia de este pais en el control de calidad de los combustibles a partir de la legislacion vigente. Se incluye un cuadro con los principales equipos, sus costos, los proveedores brasilenos y una lista de las normas brasilenas para almacenamiento y tran

  20. Rearing technique and biological traits of Atheloca subrufella (Hulst) (Lepidoptera: Phycitidae) in coconut fruits; Tecnica de criacao e aspectos biologicos de Atheloca subrufella (Hulst) (Lepidoptera: Phycitidae) em frutos de coqueiro

    Energy Technology Data Exchange (ETDEWEB)

    Santana, S.W.J.; Barros, R.; Torres, J.B.; Gondim Junior, M.G.C., E-mail: jtorres@depa.ufrpe.b [Universidade Federal Rural de Pernambuco (UFRPE), Recife, PE (Brazil). Dept. de Agronomia e Entomologia

    2011-01-15

    Larvae of the coconut moth Atheloca subrufella (Hulst) develop in flowers and fruits of coconut, Cocos nucifera, causing precocious abscission of these structures and, hence, yield decrease. This work studied a feasible and suitable rearing technique for A. subrufella using fruits of coconut. We first determined the appropriate density of larvae to be reared per coconut fruit (among two, three, four or five larvae) and later tested the suitability of this rearing technique for three successive generations. The storage of egg and pupal stages during 0, 5, 10 and 20 days was also studied at 12 deg C. Based on the fertility life table parameters, the best results were achieved by rearing two or three larvae per fruit as they yielded the best net reproductive rate and intrinsic rate of population increase. In addition, eggs and pupae of A. subrufella can be stored at 12 deg C up to five days with viability higher than 90%. Adult moths emerged from pupae stored for five days at 12 deg C produced an average of 219.4 eggs and lived 18.8 days. Storage periods for eggs and pupae over 10 days significantly reduced egg viability and adult fecundity, respectively. Thus, the technique in here described was shown to be suitable for the continuous rearing of A. subrufella in laboratory conditions. (author)

  1. The use of gamma radiation as a prophylactic technique in management and control of the diseases of the honeybee; Empleo de la irradiacion con rayos gamma como tecnica profilactica en el manejo y control integrado de enfermedades apicolas

    Energy Technology Data Exchange (ETDEWEB)

    Rapisarda, Vicenzo; Nunez, Leonardo [Comision Nacional de Energia Atomica, Ezeiza (Argentina). Centro Atomico Ezeiza

    1999-07-01

    A three years experimental essay has been carried out to determine the efficacy of the gamma irradiation for the prophylactic treatment of hive equipment and for the integrated management and control of diseases. The impact of the nuclear techniques on the production yields of the hive has been also evaluated. The results show that the gamma irradiation is a suitable complementary tool to sterilize hive equipment as a non-destructive and low cost method. (author)

  2. Conclusions of the DIRECT-MAT project: Dismantling and recycling techniques for road materials; Conclusiones del proyecto DIRECT-MAT: Tecnicas de demolicion y reciclado de materiales para la carretera

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Abadias, A. I.; Ruiz-Aucar Berlinches, E.; Sinis Fernandez, F.

    2012-07-01

    DIRECT-MAT (Dismantling and Recycling Techniques for road Materials) is a research project included in the 7{sup t}h Framework Programme of the EU, which counted with the participation of 20 partners from 15 different European countries. The Transport Research Centre of CEDEX (Spain) has been part of this project that began in January 2009. The aim of the DIRECT-MAT project has been to enable that national experience in the field of demolition and recycling of materials related to roads can be shared and disseminated among European countries for the benefit of all of them. In 2011 the paper the Direct-Mat Project: Dismantling and recycling techniques for road materials. Sharing knowledge and practices was published in the number 161 of Ingenieria Civil magazine. That paper consisted of an extensive description of the project, explaining in detail its structure, the status of the work in early 2011 and the conclusions drawn from the milestones (review of existing national documents). This paper is a continuation of the one previously published. This this article describes the work carried out since then and the collisions of the project. During this time, the main activities have been the compilation of several case studies and the developing of best practice guides. Regarding the results of the project, it is important to mention the database in which all the information gathered during the project is being uploads. Soon, it will have free online access. This database in perhaps the most remarkable results of the project, as it represents an invaluable reference tool for all the stake holders interested in the wide variety of recycling techniques that are being carried out today in Europe. (Author) 8 refs.

  3. Applied to neuro-fuzzy models for signal validation in Angra 1 nuclear power plant; Modelos de validacao de sinal utilizando tecnicas de inteligencia artificial aplicados a um reator nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Mauro Vitor de

    1999-06-15

    This work develops two models of signal validation in which the analytical redundancy of the monitored signals from an industrial plant is made by neural networks. In one model the analytical redundancy is made by only one neural network while in the other it is done by several neural networks, each one working in a specific part of the entire operation region of the plant. Four cluster techniques were tested to separate the entire region of operation in several specific regions. An additional information of systems' reliability is supplied by a fuzzy inference system. The models were implemented in C language and tested with signals acquired from Angra I nuclear power plant, from its start to 100% of power. (author)

  4. Investigation of the corrosion resistance of Ti-13Nb-13Zr alloy by electrochemical techniques and surface analysis; Investigacao da resistencia a corrosao da liga Ti-13Nb-13Zr por meio de tecnicas eletroquimicas e de analise de superficie

    Energy Technology Data Exchange (ETDEWEB)

    Assis, Sergio Luiz de

    2006-07-01

    In this work, the in vitro corrosion resistance of the Ti-13Nb-13Zr alloy, manufactured at a national laboratory, and used for orthopedic applications, has been investigated in solutions that simulate the body fluids. The electrolytes used were 0.9 % (mass) NaCl, Hanks' solution, a culture medium (MEM), and the two last electrolytes, without and with addition of hydrogen peroxide. The aim of peroxide addition was to simulate the conditions found when inflammatory reactions occur due to surgical procedures. The corrosion resistance of alloys commercially in use as biomaterials, Ti-6Al-7Nb and Ti-6Al-4V, as well as of the pure titanium (Ti-cp), was also studied for comparison with the Ti-13Nb-13Zr alloy. The corrosion resistance characterization was carried out by electrochemical and surface analysis techniques. The electrochemical tests used were: open circuit potential measurements as a function of tim; potentiodynamic polarization; and electrochemical impedance spectroscopy (EIE). The impedance experimental diagrams were interpreted using equivalent electric circuits that simulate an oxide film with a duplex structure composed of an internal and compact, barrier type layer, and an external porous layer. The results showed that the corrosion resistance is due mainly to the barrier type layer. The titanium alloys and the Ti-cp showed high corrosion resistance in all electrolytes used. The oxides formed on the Ti-13Nb-13Zr, either naturally or during immersion in MEM ar Hank's solution was characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (MEV). The results showed that the presence of hydrogen peroxide in MEM promotes the growth of the porous layer and incorporation of mineral ions, besides favouring hydroxyapatite formation. The cytotoxicity of the Ti-13Nb-13Zr alloy was also evaluated and it was shown to be non-toxic. (author)

  5. A methodology for semiautomatic taxonomy of concepts extraction from nuclear scientific documents using text mining techniques; Metodologia para extracao semiautomatica de uma taxonomia de conceitos a partir da producao cientifica da area nuclear utilizando tecnicas de mineracao de textos

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Fabiane dos Reis

    2013-07-01

    This thesis presents a text mining method for semi-automatic extraction of taxonomy of concepts, from a textual corpus composed of scientific papers related to nuclear area. The text classification is a natural human practice and a crucial task for work with large repositories. The document clustering technique provides a logical and understandable framework that facilitates the organization, browsing and searching. Most clustering algorithms using the bag of words model to represent the content of a document. This model generates a high dimensionality of the data, ignores the fact that different words can have the same meaning and does not consider the relationship between them, assuming that words are independent of each other. The methodology presents a combination of a model for document representation by concepts with a hierarchical document clustering method using frequency of co-occurrence concepts and a technique for clusters labeling more representatives, with the objective of producing a taxonomy of concepts which may reflect a structure of the knowledge domain. It is hoped that this work will contribute to the conceptual mapping of scientific production of nuclear area and thus support the management of research activities in this area. (author)

  6. Study of immobilization of radioactive wastes in asphaltic matrices and elastomeric residues by using microwave technique; Estudo da imobilizacao de rejeitos radioativos em matrizes asfalticas e residuos elastomericos utilizando a tecnica de microondas

    Energy Technology Data Exchange (ETDEWEB)

    Caratin, Reinaldo Leonel

    2007-07-01

    In the present work, the technique of microwave heating was used to study the immobilization of low and intermediate activity level radioactive waste, such as spent ion exchange resin used to remove undesirable ions of primary circuits of refrigeration in water refrigerated nuclear reactors, and those used in chemical and radionuclide separation columns in the quality control of radioisotopes. Bitumen matrices reinforced with some kinds of rubber (Neoprene{sup R}, silicon and ethylene-vinyl-acetate), from production leftovers or scraps, were used for incorporation of radioactive waste. The samples irradiation was made in a home microwave oven that operates at a frequency of 2.450 MHZ with 1.000 W power. The samples were characterized by developing assays on penetration, leaching resistance, softening, flash and combustion points, thermogravimetry and optical microscopy. The obtained results were compatible with the pattern of matrices components, which shows that technique is a very useful alternative to conventional immobilization methods and to those kinds of radioactive waste. (author)

  7. Investigation of the corrosion resistance of Ti-13Nb-13Zr alloy by electrochemical techniques and surface analysis; Investigacao da resistencia a corrosao da liga Ti-13Nb-13Zr por meio de tecnicas eletroquimicas e de analise de superficie

    Energy Technology Data Exchange (ETDEWEB)

    Assis, Sergio Luiz de

    2006-07-01

    In this work, the in vitro corrosion resistance of the Ti-13Nb-13Zr alloy, manufactured at a national laboratory, and used for orthopedic applications, has been investigated in solutions that simulate the body fluids. The electrolytes used were 0.9 % (mass) NaCl, Hanks' solution, a culture medium (MEM), and the two last electrolytes, without and with addition of hydrogen peroxide. The aim of peroxide addition was to simulate the conditions found when inflammatory reactions occur due to surgical procedures. The corrosion resistance of alloys commercially in use as biomaterials, Ti-6Al-7Nb and Ti-6Al-4V, as well as of the pure titanium (Ti-cp), was also studied for comparison with the Ti-13Nb-13Zr alloy. The corrosion resistance characterization was carried out by electrochemical and surface analysis techniques. The electrochemical tests used were: open circuit potential measurements as a function of tim; potentiodynamic polarization; and electrochemical impedance spectroscopy (EIE). The impedance experimental diagrams were interpreted using equivalent electric circuits that simulate an oxide film with a duplex structure composed of an internal and compact, barrier type layer, and an external porous layer. The results showed that the corrosion resistance is due mainly to the barrier type layer. The titanium alloys and the Ti-cp showed high corrosion resistance in all electrolytes used. The oxides formed on the Ti-13Nb-13Zr, either naturally or during immersion in MEM ar Hank's solution was characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (MEV). The results showed that the presence of hydrogen peroxide in MEM promotes the growth of the porous layer and incorporation of mineral ions, besides favouring hydroxyapatite formation. The cytotoxicity of the Ti-13Nb-13Zr alloy was also evaluated and it was shown to be non-toxic. (author)

  8. Technical feasibility study for the electrochemical treatment of Phaeozem soil contaminated with radioactive organic liquids; Estudio de la viabilidad tecnica para el tratamiento electroquimico de suelo Phaeozem contaminado con liquidos organicos radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Valdovinos G, V.

    2014-07-01

    The application of radioisotopes in medicine and research generates radioactive waste. A large part of these wastes are composed by scintillation liquid (mixtures of organic solvents, as toluene and xylene, fluorescent materials and surfactants) contaminated with radioisotopes such as {sup 3}H (12.3 y), {sup 14}C (5730 y), {sup 238}U (4.468 x 10{sup 9} y), {sup 232}Th (1.41 x 10{sup 10} y), {sup 204}Tl (3.7 y) or {sup 22}Na (2.6 y). In Mexico during the 80 s, these wastes were absorbed on soil to decrease their hazardous behavior during interim storage. However, these wastes must be removed for reprocessing and final landscaping. Therefore, the objective of this thesis is to study the technical feasibility of the electrochemical treatment of soils types Phaeozem contaminated with radioactive organic liquid waste (ROLW). For this study, an electrochemical treatment at laboratory level was applied, giving it an electrokinetic tracking. Control samples were prepared with different scintillation liquid (INSTAL Gel- XF, ULTIMA Gold AB{sup TM} and ULTIMA Gold XR{sup TM} as support electrolyte and polarization curves were constructed to select the current with the highest mass transfer. An analysis of the liquids and solids, before and after the application of the different potentials; the liquid phase was characterized by Gas Chromatography coupled with Flame Ionized Detector (GC-FID) and Fourier Transform Infrared Spectrometry (Ft-Irs), and the solids by Ft-Irs. From the fourteen supports electrolytes studied, eleven did not have a stable diffusion current and the other three showed a diffusion current plateau in 0.02, 0.04 and 0.06 m A·cm{sup -2}. From polarization curves, the following experimental conditions were chosen for the treatment: electrodes (meshes of titanium as anode and rod of stainless steel as cathode), scintillation liquid (ULTIMA Gold XR{sup TM} : water, 1:1) and a current of 0.06 m A·cm{sup -2}. Subsequently, radioactive control samples were prepared with soil-scintillation liquid, labeled with {sup 24}Na, {sup 99m}Tc, {sup 3}H or {sup 14}C, to determine the removal efficiency of these radioisotopes. {sup 24}Na was chosen, instead of {sup 22}Na, for its short half-life (15.03 h) to facilitate handling of samples and reduce the radiation hazards involved in using {sup 22}Na (2.6 y). In the case of {sup 99m}Tc, it did not adsorbed in the medium analyzed, and it was used as a standard. The {sup 3}H and {sup 14}C were used because they are present in the waste and could not be replaced. The {sup 24}Na and {sup 99m}Tc were quantified on a Gamma spectrometer constituted by a hyper pure germanium detector connected to a multichannel card, in 140.5 keV and 1368.6 keV for {sup 99m}Tc and {sup 24}Na respectively, and the {sup 3}H and {sup 14}C by liquid scintillation counter; all of them have a fixed geometry. The liquid and solid phases were analyzed, as well as the electrodes, by the same analytical techniques mentioned previously, once both radiotracers decayed the {sup 22}Na and {sup 99m}Tc. According to the Ft-Irs analysis, soils did not show any deterioration and, in the liquid phase, the amount of water increased, as the applied potential increased. The liquid phase chromatograms indicate that some compounds were modified after applying 5 and 7 V. The kinetic study of {sup 99m}Tc showed that 15 % to 20 % was removed each hour close to the anode, 61 % in 4 h and 91 % in 6 h. For the {sup 24}Na the removal in 4 hour of treatment was of 71.8 %, close to the cathode. In the case of {sup 14}C and {sup 3}H, the electrochemical treatment only showed an improvement in the extraction of {sup 14}C because the removal percentages are of the extraction with thinner, due to the addition of this compound, for the problems presented by taking sample; this prevented to quantify the percentages of electro-removal. (Author)

  9. Characterization of archaeological ceramics from the north western lowland Maya Area, using the technique of neutron activation analysis; Caracterizacion de ceramicas arqueologicas de las tierras bajas noroccidentales del Area Maya, empleando la tecnica de activacion neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Lopez R, M. C.; Tenorio, D.; Jimenez R, M. [ININ, Carretera Mexico-Toluca s/n, Ocoyoacac 52750, Estado de Mexico (Mexico); Terreros, E. [Museo del Templo Mayor, INAH, Seminario No. 8, Col. Centro, Mexico 06060, D. F. (Mexico); Ochoa, L. [UNAM, Instituto de Investigaciones Antropologicas, Circuito Exterior s/n, Ciudad Universitaria, Mexico 04510, D. F. (Mexico)

    2008-07-01

    It is a study on 50 samples of ceramics from various archaeological sites of the north western lowland Maya Area. This study was performed by neutron activation analysis of 19 chemical elements and the treatments relevant statistical data. Significant differences were found among the pieces that led to group them into five major groups, the difference is the site of their manufacture and therefore in the raw materials used for this. (Author)

  10. Study of Rn-222 exhalation in phosphogypsum through the adsorption technique in activated coal; Estudo da exalacao de Rn-222 em fosfogesso por meio da tecnica de adsorcao em carvao ativado

    Energy Technology Data Exchange (ETDEWEB)

    Nisti, Marcelo Bessa; Campos, Marcia Pires de, E-mail: mbnisti@ipen.b, E-mail: mpcampos@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-10-26

    The radon exhalation was estimated through the adsorption in activated carbon technique. Classified as TENORM, the radon exhalation determination on the phosphogypsum piles was performed through the adsorption ratio of radon in activated carbon, from the concentration of descendants of {sup 222}Rn, {sup 214}Pb and {sup 214}Bi obtained by gamma spectrometry. The results obtained in this work were compatibles with the values found in the literature

  11. Establishment of a luminescence technique for the quantification of uranyl ion in a KNO{sub 3} media; Establecimiento de una tecnica de luminiscencia para la cuantificacion del ion uranilo en medio de KNO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Contreras R, A. [UAEM, A.P. 2-139, 50000 Toluca, Estado de Mexico (Mexico); Fernandez V, S.M.; Ordonez R, E. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2005-07-01

    The study of the storage of high level radioactive residuals that contain uranium, it makes necessary that in the sorption studies is counted with a reliable technique and not pollutant for the quantification of this element. Presently work intends a technique for the quantification of the uranyl ion using the luminescence technique, which allows not to generate radioactive or industrial residuals. It was used a solution of uranyl nitrate in KNO{sub 3} 0.5 M media. The solutions were adjusted to a pH of 1.48+0.03. A statistical study for the analysis of the data of fluorescence, about the maximum value of the peak, total area under the curve and area under the it curves is shown, being the best correlation for the concentration curve versus maximum of the peak, adjusted with a polynomial of second grade. The study of stability of the solutions with regard to the time is reported and that the technique proposal works for the interval of concentrations among 1 x 10{sup -2} M and 6 x 10{sup -5} M. (Author)

  12. Technical assistance in relationship with the reloading analysis of the Laguna Verde Unit 2 reactor. Executive abstract; Asistencia tecnica en relacion con el analisis de recargas de la CNLV U-2

    Energy Technology Data Exchange (ETDEWEB)

    Alonso V, G.; Castro B, M.; Gallegos E, R.; Hernandez L, H.; Montes T, J.L.; Ortiz S, J. J.; Perusquia C, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1993-11-15

    The objective of the report was to carry out a comparative analysis of costs of energy generation among the designs GE9B of General Electric, 9X9-IX of SIEMENS and SVEA-96 of ABB ATOM, proposed to be used as recharge fuel in the Unit 2 of the Laguna Verde Nuclear Power station. (Author)

  13. Identification of microorganisms involved in nitrogen removal from wastewater treatment systems by means of molecular biology techniques; Identificacion de microorganismos implicados en la eliminacion de nitrogeno en sistemas de tratamiento de aguas residuales mediante tecnicas de biologia molecular

    Energy Technology Data Exchange (ETDEWEB)

    Figueroa, M.; Alonso-Gutierrez, J.; Campos, J. L.; Mendez, R.; Mosquera-Corral, A.

    2010-07-01

    The identification of the main bacteria populations present in the granular biomass from a biological reactor treating wastewater has been performed by applying two different molecular biology techniques. By means of the DGGE technique five different genera of heterotrophic bacteria (Thiothrix, Thauera, Cloroflexi, Comamanas y Zoogloea) and one of ammonia oxidizing bacteria (Nitrosomanas) were identified. The FISH technique, based on microscopy, allowed the in situ visualization and quantification of those microorganisms. Special attention was paid to filamentous bacteria distribution (Thiothrix and Cloroflexi) which could exert a structural function in aerobic granular sludge. (Author) 26 refs.

  14. Economic and technical considerations on the use of vegetable oils as fuel substitute for diesel oil; Consideracoes economicas e tecnicas sobre o uso de oleos vegetais combustiveis como substituto de oleo diesel

    Energy Technology Data Exchange (ETDEWEB)

    Mourad, Anna Lucia [Universidade Estadual de Campinas (DE/FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia], Email: anna@ital.sp.gov.br

    2006-07-01

    The introduction of bio diesel in the Brazilian energy matrix has been mainly motivated by the governmental actions, which foresees social and economical development to the country in a program that allows the use of different oil seed crops as raw materials for biofuels production. Cost estimates considering the average price received by the farmer and the oil content of each vegetable shows that the minimum cost of bio fuel was about 1,1(castor bean); 1,8(peanut); 2,0(soy beans); 3,3(corn) higher than the average cost of fossil diesel from 1975 to 2004. Among the evaluated raw materials, only the palm oil had inferior cost compared to the petroleum diesel (0.6%). The oleaginous plants that have a higher oil content and smaller agricultural production cost to produce bio fuels are economically most feasible and they should be prioritized in the government program so that it may become economically sustainable along the years, as well as generate adequate profit to the farmers of each culture. The feasibility of National Program for Biofuels Use and Production and both economical and environmental aspects should also consider the destination of the main by-products of the biofuel productive chain such as the left over cakes after extraction of the oil and glycerine produced during the transesterification process. (author)

  15. Measurement of absorbed radiation doses during whole body irradiation for bone marrow transplants using thermoluminescent dosimeters; Verificacao das doses de radiacao absorvidas durante a tecnica de irradiacao de corpo inteiro nos transplantes de medula ossea, por meio de dosimetros termoluminescentes

    Energy Technology Data Exchange (ETDEWEB)

    Giordani, Adelmo Jose; Segreto, Helena Cristina Comodo; Segreto, Roberto Araujo; Medeiros, Regina Bitelli; Oliveira, Jose Salvador R. de [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Setor de Radioterapia]. E-mail: adelmogiordani@ig.com.br

    2004-10-01

    The objective was to evaluate the precision of the absorbed radiation doses in bone marrow transplant therapy during whole body irradiation. Two-hundred CaSO{sub 4}:Dy + teflon tablets were calibrated in air and in 'phantom'. These tablets were randomly selected and divided in groups of five in the patients' body. The dosimetric readings were obtained using a Harshaw 4000A reader. Nine patients had their entire bodies irradiated in parallel and opposite laterals in a cobalt-60 Alcion II model, with a dose rate of 0.80 Gy/min at 80.5 cm, {l_brace}(10 ? 10) cm{sup 2} field. The dosimetry of this unit was performed using a Victoreen 500 dosimeter. For the determination of the mean dose at each point evaluated, the individual values of the tablets calibrated in air or 'phantom' were used, resulting in a build up of 2 mm to superficialize the dose at a distance of 300 cm. In 70% of the patients a variation of less than 5% in the dose was obtained. In 30% of the patients this variation was less than 10%, when values obtained were compared to the values calculated at each point. A mean absorption of 14% was seen in the head, and an increase of 2% of the administered dose was seen in the lungs. In patients with latero-lateral distance greater than 35 cm the variation between the calculated doses and the measured doses reached 30% of the desired dose, without the use of compensation filters. The measured values of the absorbed doses at the various anatomic points compared to the desired doses (theoretic) presented a tolerance of {+-} 10%, considering the existent anatomical differences and when using the individual calibration factors of the tablets. (author)

  16. NASVD and MNF techniques and your application noise reduction in gamma-ray spectrometric data; As tecnicas NASVD e MNF e sua aplicacao na reducao de ruidos em dados gamaespectrometricos

    Energy Technology Data Exchange (ETDEWEB)

    Cavallaro, Francisco de Assis, E-mail: assisfc@yahoo.com.br, E-mail: assis@agp-la.org [Departamento de Geologia Sedimentar e Ambiental, DGSA, Instituto de Geociencias, IG, Universidade de Sao Paulo, SP (Brazil); AGPLA, AeroGeoPhysica Latinoamerica, Sao Paulo, SP (Brazil); Portugal, Rodrigo S.; Bizuti, Ariathemis M., E-mail: portugal@ige.unicamp.br, E-mail: ambizuti@ige.unicamp.br [Departamento de Geologia e Recursos Naturais, DGRN, Instituto de Geociencias, IG, Universidade Estadual de Campinas, SP (Brazil); Silva, Adalene M., E-mail: adalene@unb.br [Universidade de Brasilia (UnB), DF (Brazil). Inst. de Geociencias. Dept. de Geoquimica e Recursos Minerais (GRM)

    2009-04-15

    The radioactive decay is a random process, and the measurement precision is ruled by statistical laws. The counting ratios of the profiles are always noisy when analyzed for short periods, such as one second per measurement. Corrections made at the end of conventional processing in the airborne gamma-ray spectrometric method data are not enough to remove and minimize, or even reduce considerably, the spectrum's originated noise. Two statistic methods that act locally in collected data, in the spectrum domain, have been suggested by literature to remove such remaining noises, the Noise-Adjusted Singular Value Decomposition - NASVD and Maximum Noise Fraction - MNF. These methods produce a significantly noise reduction. In this work both methods were applied in an area comprehended by two blocks, I and II, of the airborne survey that covers the west area of Mineral Province of Tapajos between Para and Amazon states. The filtered and non-filtered data with the NASVD and MNF techniques were processed with the Lasa's parameters. The comparison of results between maps and profiles shows that both methods are valuable, since there was resolution gain in these products. (author)

  17. Microstructural characterization of TiAl{sub 3} intermetallic obtained by the Fast solidification technique; Caracterizacion microestructural del intermetalico TiAl{sub 3} obtenida por la tecnica de solidificacion rapida

    Energy Technology Data Exchange (ETDEWEB)

    Angeles C, C.; Rosas, G.; Perez C, R. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    In this work preliminary studies about the TiAl{sub 3} characterization are reported which is obtained starting from the Fast solidification technique in an arc furnace using Scanning electron microscopy, X-ray diffraction and Transmission electron microscopy. (Author)

  18. 14. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 14. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Selected papers from the 14th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, PEMEX, and FIDE.

  19. Comparison between 3D conventional techniques, field-in-field and electronic tissue compensation for mantle fields planning; Comparacao entre tecnica 3D convencional, field-in-field e compensacao eletronica para planejamento de manto

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Lais P.; Silva, Leonardo P.; Trindade, Cassia; Garcia, Paulo L.; Santos, Maira R.; Batista, Delano V.S., E-mail: pm.lais@gmail.com [Instituto Nacional de Cancer (INCA), Rio de Janeiro, RJ (Brazil)

    2012-12-15

    External radiotherapy treatment for Hodgkin's lymphoma over diaphragm region requires large radiation fields with protections applied to larynx, humerus head and lungs. The size and shape of the field, which covers different depths, make it difficult to distribute a homogeneous dose. Techniques such as field-in-field and electronic tissue compensation may be used to make dose homogeneous and compensate the obliquity from the tissue. Three types of planning were performed for diagnose of nodular sclerosis Hodgkin's lymphoma: one plan with two fields, AP-PA (AP plan), another with four fields field-in- field (FF plan), and a third one with two fields and electronic tissue compensation (ETC plan). Results showed better gradient, cover of PTV and dose distribution for the ETC plan, besides the advantage from this technique of does not require protection blocks. In the meanwhile, AP and FF plans require simpler dosimetry and fewer MU. Related to the uniformity of dose distribution, AP plan showed hot areas in the neck region, FF plan showed hot areas in the shoulder region and ETC plan showed most uniform distribution without hot areas. The electronic tissue compensation is a useful tool for large and shaped fields as the mantle field, however higher MU and complex dosimetry should be taken in account. (author)

  20. Using the ultrasound and instrumented indentation techniques to measure the elastic modulus of engineering materials; Medicion del modulo de elasticidad en materiales de ingenieria utilizando la tecnica de indentacion instrumentada y de ultrasonido

    Energy Technology Data Exchange (ETDEWEB)

    Meza, J. M.; Franco, E. E.; Farias, M. C. M.; Buiochi, F.; Souza, R. M.; Cruz, J.

    2008-07-01

    Currently, the acoustic and nano indentation techniques are two of the most used techniques for materials elastic modulus measurement. In this article fundamental principles and limitations of both techniques are shown and discussed. Last advances in nano indentation technique are also reviewed. an experimental study in ceramic, metallic, composite and single crystals was also done. Results shown that ultrasonic technique is capable to provide results in agreement with those reported in literature. However, ultrasonic technique does not allow measuring the elastic modulus of some small samples and single crystals. On the other hand, the nano indentation technique estimates the elastic modulus values in reasonable agreement with those measured by acoustic methods, particularly in amorphous materials, while in some policristaline materials some deviation from expected values was obtained. (Author) 29 refs.

  1. Modelling in pinnacle for distance extended source-patient and verification with film EBT2 technique; Modelizacion en pinnacle para tecnica de distancia fuente-paciente extendida y verificacion con peliculas EBT2

    Energy Technology Data Exchange (ETDEWEB)

    Perucha Ortega, M.; Luis simon, J.; Rodriguez Alarcon, C.; Baeza Trujillo, M.; Sanchez Carmona, G.; Vicente Granado, D.; Gutierrez Ramos, S.; Herrador Cordoba, M.

    2013-07-01

    The objective of this work is modelled on the Pinnacle Scheduler the geometry used in our Center for the technique of Total body irradiation which consists of radiate to the patient, whose middle line is 366 cm from the source, in positions lateral decubitus, with 2 fields anteroposterior of 40 x 40 cm{sup 2}, rotated collimator 45 degree centigrade interposing a screen of methacrylate 1 cm thick to 29 cm ahead of the middle line. (Author)

  2. Optical and structural characterization of titanium dioxide films growth by the r f-sputtering technique; Caracterizacion optica y estructural de peliculas de dioxido de titanio crecidas por la tecnica de rf-sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Florido C, A.; Calderon, A. [CICATA-IPN, Av. Legaria 694, 11500 Mexico D.F. (Mexico); Mendoza A, J.G.; Becerril, M.; Zelaya A, O. [CINVESTAV, A.P. 14-740, 07000 Mexico D.F. (Mexico)

    2007-07-01

    Full text: The elaboration of a series of grown films of TiO on Corning glaze substrates, as well as silicon, by means of the rf-sputtering technique using one power of 160 watts, with the objective of obtaining the anatase phase which one presents better activity for applications in photo catalysis. In the process of growth it was used a temperature in the range from 300 to 600 C and a separation distance among the target and the substrate of 3.5 cm. The used atmosphere was a mixture of argon and oxygen. It was carried out the characterization of the films obtained by means of UV-vis spectrophotometry, and photoluminescence (FL). The microstructure analysis was carried out by means of X-ray diffraction (XRD), micro-Raman (MR), and atomic force microscopy (AFM). By means of the diffractographs it was determined the grain size. Our results show that in our films they are present the anatase and rutile phases of the titanium dioxide. The analysis of the results of optical spectra shows a forbidden band of the titanium dioxide around 3.2 eV. (Author)

  3. The direct-Mat Project: Dismantling and Recycling Techniques for road Materials. Sharing Knowledge and Practices; El proyecto DIRECT-MAT: Tecnicas de demolicion y reciclado de materiales para la carretera-Compartiendo conocimientos y practicas

    Energy Technology Data Exchange (ETDEWEB)

    Sinis Fernandez, F.; Rubio guzman, B.; Gonzalez Abadias, A. I.

    2011-07-01

    This article describes the content of the DIRECT-MAT (Dismantling and Recycling for road Materials) project. the DIRECT MAT project objectives consist of sharing and disseminating, at the European scale, national knowledge and field practices regarding the dismantling and recycling of road and road related materials, for the benefit of all European countries. Road material recycling processes have previously been studied in national research projects in the last years; unfortunately, the results of those projects almost never benefit other European countries. This is especially true for the newer Member States. The DIRECT-MAT project, within 7{sup t}h Framework Programme, is a three year project starting in 2009, and is comparised of 20 partners from 15 participating countries. to reach the aims of the project, a WEB database will be created to compile and display the extensive and already validated research and job site data and a set of Best Practices Guides on dismantling and recycling of different types of materials will be issued. Finally, guidelines will be proposed to ensure database updating, including the results of future researches. (Author) 6 refs.

  4. The CIEDA-CIEMAT. The close relationship been Environmental Law and Scientific-Technical Innovation; El CIEDA-CIEMAT. La Intima relacion entre el derecho ambiental y la innovacion cientifico-tecnica

    Energy Technology Data Exchange (ETDEWEB)

    Molina Hernandez, A. J.

    2010-07-01

    The main goal of the International Environmental Law Studies Center (CIEDA-CIEMAT) is to become a reference center in the area of research, development and dissemination of the legal instruments needed to implement sustainability policies. The CIEDA-CIEMAT forms part of the actions included in the Specific Action Plan for Soria (PAES) that commissions CIEMAT to create such a center. The legal needs associated with environmental protection have brought about a rapid evolution of environmental law. The CIEDA-CIEMAT intends to support the public powers and civil society in the implementation of a sustainable development model. Considering the global nature of environmental problems, the international orientation of the Center is an essential ingredient, with a special focus on cooperation with the developing countries. Tho close ties of this branch of law to scientific-technological knowledge fully justifies the inclusion of a center of this nature in CIEMAT. (Author)

  5. Economical and technical feasibility of the conventional energy source substitution by biogas in rural settlement of Sao Paulo; Viabilidade tecnica e economica da substituicao de fontes convencionais de energia por biogas em assentamento rural do Estado de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Esperancini, Maura S.T.; Bueno, Osmar de C.; Pimentel, Andrea E.B.; Simon, Elias J. [UNESP, Botucatu, SP (Brazil). Dept. de Gestao e Tecnologia Agroindustrial]. E-mail: maura@fca.unesp.br; Colen, Fernando [Faculdades Sudoeste Paulista, Avare, SP (Brazil)

    2007-01-15

    The aim of this work was to evaluate the economic feasibility of two biodigestion systems using animal excrements in a rural settlement, in Itabera - SP, Brazil, in the year of 2005. One of them was constructed to supply biogas for five residences. The other one was constructed to supply biogas for production activities. The generated benefits related to the supply of electric and thermal energy were evaluated, using biogas for five residences and for production activities, in comparison to the annual costs of the biodigestion system construction and operation. The results showed economic feasibility of the biogas production in both cases. It was generated economic benefits of US$ 1,766.84 and US$ 4,338.54 per year for the residential biodigestion system and production activities biodigestion system, respectively, as well as US$ 706.20 per year for biofertilizer production. The costs were estimated in US$ 582.18 per year in each biodigestion system. The pay-back was evaluated in 2.5 years for the residential case and 11 months for the production case, respectively. These results can be used to formulate public policies directed to biomass exploitation to produce low cost energy focused on familiar agriculture. (author)

  6. 17. national seminar on the rational use of the energy and exposition of equipment and services. Transactions. [Selected Papers]; 17. seminario nacional sobre el uso racional de la energia y exposicion de equipos y servicios. Memoria tecnica

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Selected papers from the 17th annual national seminar on the rational use of the energy and exposition of equipment and services have been separately cited in the database. The seminar is jointly sponsored by ATPAE, CONAE, and FIDE.

  7. Doppler echography and utilization of intravenous echo enhancer in the follow-up of hepato carcinoma with percutaneous radiological techniques; Ecografia Doppler y empleo del ecopotenciador intravenoso en el seguimiento del hepatocarcinoma con tecnicas radiologicas percutaneas

    Energy Technology Data Exchange (ETDEWEB)

    Forner, J; Flored de la Torre, M.; Senis, C; Lozano de Arnilla, M C; Ferrer, S; Celma, M I [Hospital General Universitario de Valencia. Valencia (Spain)

    2002-07-01

    To evaluate the utilization of Doppler ultrasound scan in conjunction with echographic enhancer in the follow-up of hepato carcinomas treated by means of radiological intervention techniques. We treated 20 hepatic nodules diagnosed with hepato carcinoma either by means of chemo embolization or percutaneously (either injection of acetic acid or radio-frequency thermo-ablation). Doppler ultrasound scan was performed before and after the treatment by means of sectorial and convex multifrequency probes. Evaluated were the absence, presence and degree of vascularisation, as well as its distribution and characteristics. In all cases, a contrast-en-handed spiral CT was performed. Both studies served as a pattern for comparison before and after treatment. In post-treatment enhanced-echo-Doppler controls of the 18 patients treated with acetic acid, vascularisation was not demonstrated in 7 cases, peripheral vascularisation was detected in 4 cases, perforation vascularisation in another four, and central vascularisation was detected in 3 cases. Contrast-enhanced spiral CT demonstrated superimposed findings, except in one cases, in which the spiral CT detected central capitation of the nodule.With enhanced echo-Doppler, peripheral vascularisation was detected. In both nodules treated by means of radio-frequency thermo ablation, there was detected neither vascularisation in the echo-Doppler nor captation of contrast media in the CT. Doppler ultrasound scan is a good method of follow-up for treated hepato carcinomas. The utilization of echoenhancers increases its ability to detect vascularization it being comparable to that of contrast-enhanced CT. As such, Doppler ultrasound scan together with echoenhancers can help us both in the selection of treatment and evaluation of therapeutic response. (Author) 35 refs.

  8. Elemental Characterization of minerals in Chenopodium quinoa grains by the X-ray fluorescence technique; Caracterizacion elemental en granos de quinua (Chenopodium quinoa Willd.) mediante la tecnica de fluorescencia de rayos X

    Energy Technology Data Exchange (ETDEWEB)

    Olivera de Lescano, Paula, E-mail: polivera@ipen.gob.pe [Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Av. Jose Saco km 12.5, Carabayllo, Lima (Peru); Nieto Aco, Daniel [E.P.A. de Quimica, Facultad de Ciencias, Universidad Nacional de Ingenieria, Av. Tupac Amaru 210, Lima (Peru)

    2014-07-01

    In order to characterize by the technique of X-ray fluorescence energy dispersive quinoa grain for human consumption, 8 samples of different trademarks of quinoa, which are distributed in the local market were analyzed; together one reference materials certified by the International Atomic Energy Agency (IAEA) was analyzed. The results show the presence of elements such as K, Ca, Mn, Fe, Cu, Zn, Rb and Sr, the same as compared to data reported in various studies in neighboring countries like Ecuador, Chile and Bolivia. (authors).

  9. Using of gas for water heating at buildings - study on technical and economical viability; Utilizacao de gas para aquecimento de agua em instalacoes prediais - estudo de viabilidade tecnica e economica

    Energy Technology Data Exchange (ETDEWEB)

    Fossa, Alberto Jose [MDJ Assessoria e Engenharia Consultiva, Santo Amaro, SP (Brazil)]. E-mail: afossa@mdj.com.br; Chaguri, Jose Jorge [Caltherm Sistemas de Aquecimento, Sao Paulo, SP (Brazil)]. E-mail: jchaguri@caltherm.com.br; Santos, Edmilson Moutinho dos [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia]. E-mail: edsantos@iee.usp.br

    2006-07-01

    The recent discovery of significant Brazilian's natural gas reserves has been opened a discussion concerning public procedures in order to incentive development of gas industry thru delivery of this energetic to the end consumer. Concerning this figure, a significant quantity of uses has been questioned related economical viability. This paper comes to analyze the possibility to change electrical energy for natural gas on heating water systems used on residential installations. Concerns about economical impact of alternative adopted on locals where public regulations are been established to incentive natural gas end uses. (author)

  10. Investigation of hyperfine interactions in pure silicon and NTD silicon by means of perturbed angular {gamma}-{gamma} correlation spectroscopy; Investigacao de interacoes hiperfinas em silicio puro e silicio NTD pela tecnica de correlacao angular {gamma}-{gamma} perturbada

    Energy Technology Data Exchange (ETDEWEB)

    Cordeiro, Moacir Ribeiro

    2007-07-01

    III the present work, a microscopic investigation of hyperfine interactions in single crystal silicon samples was carried out by means of Perturbed Angular {gamma} -{gamma} correlation technique (PAC), which is based in hyperfine interactions. In order to achieve these measurements, it was used {sup 111} In {yields} {sup 111}Cd radioactive probe nuclei, which decay through the well known {gamma} cascade 171-245 keV with an intermediate level of 245 keV ( I 5{sup +}/2, Q = 0.83b, T{sub 1/2} = 84.5 ns). The samples were prepared using different probe nuclei insertion methods, making possible to increase our understanding on the impact generated by each of these techniques in PAC measurements. Ion implantation, diffusion and evaporation were carefully investigated giving emphasis on its characteristics and particularities. Then, it was made a study about the concentration of intrinsic defects as function of severe annealing processes. Finally, a comparative analysis was made for all these probe nuclei insertion methods. This work also accomplished PAC measurements in single crystal silicon doped with phosphorus by means of Neutron Transmutation Doping (NTD) method, carried out in a research nuclear reactor. The extremely high doping uniformity allied to the nonexistence of previous measurements in these materials emphasize the importance of the results obtained. These results are then compared with literature results for samples doped by conventional methods presenting the respective conclusions. (author)

  11. TPR system: a powerful technique to monitor carbon nanotube formation during chemical vapour deposition; Sistema RTP: uma tecnica poderosa para o monitoramento da formacao de nanotubos de carbono durante o processo por deposicao de vapor quimico

    Energy Technology Data Exchange (ETDEWEB)

    Tristao, Juliana Cristina; Moura, Flavia Cristina Camilo; Lago, Rochel Montero, E-mail: rochel@ufmg.b [Universidade Federal de Minas Gerais (DQ/UFMG), Belo Horizonte, MG (Brazil). Dept. de Quimica; Sapag, Karim [Universidade Nacional de San Luis (Argentina). Lab. de Ciencias de Superficies y Medios Porosos

    2010-07-01

    In this work, a TPR (Temperature Programmed Reduction) system is used as a powerful tool to monitor carbon nanotubes production during CVD (Chemical Vapour Deposition), The experiments were carried out using catalyst precursors based on Fe-Mo supported on Al{sub 2}O{sub 3} and methane as carbon source. As methane reacts on the Fe metal surface, carbon is deposited and H2 is produced. TPR is very sensitive to the presence of H2 and affords information on the temperature where catalyst is active to form different forms of carbon, the reaction kinetics, the catalyst deactivation and carbon yields. (author)

  12. Carbon thin films deposited by the magnetron sputtering technique using cobalt, copper and nickel as buffer-layers; Filmes finos de carbono depositados por meio da tecnica de magnetron sputtering usando cobalto, cobre e niquel como buffer-layers

    Energy Technology Data Exchange (ETDEWEB)

    Costa e Silva, Danilo Lopes

    2015-11-01

    In this work, carbon thin films were produced by the magnetron sputtering technique using single crystal substrates of alumina c-plane (0001) and Si (111) and Si (100) substrates, employing Co, Ni and Cu as intermediate films (buffer-layers). The depositions were conducted in three stages, first with cobalt buffer-layers where only after the production of a large number of samples, the depositions using cooper buffer-layers were carried out on Si substrates. Then, depositions were performed with nickel buffer layers using single-crystal alumina substrates. The crystallinity of the carbon films was evaluated by using the technique of Raman spectroscopy and, then, by X-ray diffraction (XRD). The morphological characterization of the films was performed by scanning electron microscopy (SEM and FEG-SEM) and high-resolution transmission electron microscopy (HRTEM). The XRD peaks related to the carbon films were observed only in the results of the samples with cobalt and nickel buffer-layers. The Raman spectroscopy showed that the carbon films with the best degree of crystallinity were the ones produced with Si (111) substrates, for the Cu buffers, and sapphire substrates for the Ni and Co buffers, where the latter resulted in a sample with the best crystallinity of all the ones produced in this work. It was observed that the cobalt has low recovering over the alumina substrates when compared to the nickel. Sorption tests of Ce ions by the carbon films were conducted in two samples and it was observed that the sorption did not occur probably because of the low crystallinity of the carbon films in both samples. (author)

  13. An adaptive Petrov-Galerkin formulation for solving the compressible Euler and Navier-Stokes; Uma formulacao de Petrov-Galerkin para a resolucao das equacoes de Euler e Navier-Stokes compressivel usando tecnicas adaptativas

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Regina Celia Cerqueira de

    1994-12-31

    A space-time finite element finite element formulation for the compressible Euler and Navier-Stokes equations is proposed. The present work develops a stable generalized CAU method which represents shocks and boundary-layers accurately. An h-adaptive remeshing refinement, which takes into account directional stretching and stretching ratio, is used leading to a very good way to indicate and refine the flow regions with singularities. Numerical experiment were conducted for some steady and unsteady problems and the performance of the proposed methods is discussed. (author) 63 refs., 40 figs.

  14. La anemia por deficiencia de hierro en la población infantil de Cuba. Brechas por cerrar

    OpenAIRE

    Pita-Rodríguez, Gisela; Jiménez-Acosta, Santa

    2011-01-01

    La anemia es un problema de salud mundial que afecta tanto a los países desarrollados como a aquellos en desarrollo. Sus causas pueden ser multifactoriales y frecuentemente pueden coexisitir varias de ellas; la principal es la baja ingestión de alimentos con fuentes adecuadas de hierro, tanto en cantidad como en calidad. En Cuba se está trabajando desde el año 1987 en el desarrollo de programas de intervención para la prevención de la anemia por deficiencia de hierro en la población, pero a p...

  15. ÁNGULOS DEL PLANP SAGITAL DE LA COLUMNA LUMBOSACRA EN UNA MUESTRA DE ADOLESCENTES DE LA CIUDAD DE TEMUCO, CHILE

    OpenAIRE

    Silva M., Héctor

    2001-01-01

    Las disfunciones de la columna vertebral que producen incapacidad laboral, son de alta prevalencia en el mundo. Este problema de salud pública afecta a la mayoría de las personas principalmente en la edad media de la vida. Los problemas de columna son multifactoriales y uno de ellos es el aumento de la lordosis lumbar, por aumentos del ángulo lumbosacro, ángulo lordótico y profundidad de la lordosis. El propósito del estudio fue conocer como se comportan nuestros adolescentes con respecto a l...

  16. Determinación de la prevalencia de lesiones adquiridas dentarias en adultos concurrentes al Servicio de Prácticas Odontológicas Integradas - FOLP | UNLP

    OpenAIRE

    Sala Espiell, Ana; Armendano, Alejandro Sergio; Crimaldi, Delia Norma; Obiols, Cecilia Isabel; Paleo, María Amelia; Mastrancioli, María Leonilda; Rasse, José Nicolás

    2015-01-01

    Se denomina lesiones de los tejidos duros dentarios a los cambios patológicos sufridos por el esmalte, dentina y cemento’ luego de completada la odontogénesis normal. De acuerdo a su etiología las causas de estas lesiones pueden ser mecánicas, químicas y multifactoriales. La nómina de lesiones más importantes incluye: caries, fracturas, atrición, abrasión, erosión, reabsorción, pigmentaciones, hipercementosis y anquilosis. Algunas van acompañadas de alteraciones en la función masticatoria, al...

  17. Determinación de la prevalencia de lesiones adquiridas dentarias en adultos concurrentes al servicio de prácticas odontológicas integradas - FOLP | UNLP

    OpenAIRE

    Sala Espiell, Ana; Armendano, Alejandro; Crimaldi, Delia; Obiols, Cecilia; Paleo, María Amelia; Mastrancioli, María Leonilda; Rasse, Nicolas

    2015-01-01

    Se denomina lesiones de los tejidos duros dentarios a los cambios patológicos sufridos por el esmalte, dentina y cemento’ luego de completada la odontogénesis normal. De acuerdo a su etiología las causas de estas lesiones pueden ser mecánicas, químicas y multifactoriales. La nómina de lesiones más importantes incluye: caries, fracturas, atrición, abrasión, erosión, reabsorción, pigmentaciones, hipercementosis y anquilosis. Algunas van acompañadas de alteraciones en la función masticatoria, al...

  18. El papel de la genética en la aparición y desarrollo de la periodontitis: II: Polimorfismos asociados a la enfermedad periodontal The role of genetics in the development and progression of periodontitis: II: Polymorphism associated to periodontal disease

    OpenAIRE

    D. Rodrigo-Gómez; A. Oteo-Calatayud; A. Alonso-Rosado; A. Bascones-Martínez

    2008-01-01

    La periodontitis es una enfermedad multifactorial que resulta de la interacción de bacterias periodontopatógenas con los mecanismos de respuesta inmune del huésped y que se caracteriza por una reacción inflamatoria que afecta al aparato de inserción del diente. Las enfermedades multifactoriales habitualmente envuelven complejas interacciones de muchos genes y factores ambientales. El tipo de variaciones genéticas involucradas en este tipo de enfermedades se denominan polimorfismos genéticos, ...

  19. Desórdenes gastronómicos: Metáfora literaria compleja en la narrativa de Ana María del Río y Andrea Maturana

    OpenAIRE

    GÁLVEZ-CARLISLE, GLORIA

    2005-01-01

    Este artículo examina las complejas causas, síntomas y consecuencias de la anorexia nervosa y la bulimia y su representación en la narrativa de dos escritoras chilenas contemporáneas: Ana María del Río y Andrea Maturana. Propongo que las manifestaciones físicas y psicológicas de estos trastornos gastronómicos están íntimamente relacionadas con complejos problemas multifactoriales que muestran los diversos modos en que las protagonistas se relacionan con su medio social. La novela Oxido de Car...

  20. Measurements of the Asymptotic Spectrum of a Multiplying Medium; Mesures du Spectre Asymptotique d'Un Milieu Multiplicateur; Izmereniya asimptoticheskogo spektra umnozhayushchej sredy; Mediciones del Espectro Asintotico en un Medio Multiplicador

    Energy Technology Data Exchange (ETDEWEB)

    Slovacek, R. E.; Cerbone, R. J.; Gaerttner, E. R.; Fullwood, R. R.; Bach, D. R. [Rensselaer Polytechnic Institute, Troy, NY (United States)

    1965-08-15

    enriquecido en el isotopo {sup 235}U y empleaban H como moderador. Dos de ellos se prepararon con tiras de combustible introducidas en agua; los dos restantes consistian en una mezcla de polvos de UO{sub 2} y de ZrO{sub 2} dispersa en parafina. Se puso cuidado en que las dimensiones de los sistemas y las razones H/{sup 235}U fuesen distintos, a fin de que lo fueran tambien la absorcion, el escape y la dispersion. Se calculo el espectro escalar por un procedimiento basado en la teoria de la difusion en regimen estacionario. La concordancia entre los espectros medidos y los escalares fue satisfactoria cuando se empleo para calcular el espectro el valor medido de la constante de decrecimiento asintotico. Pudo comprobarse que el espectro asintotico calculado era muy sensible a la variacion de esa constante; una modificacion del 7% en el valor de la constante correspondiente a uno de los conjuntos se tradujo en una modificacion del 41% en la razon flujo termico/flujo de moderacion. Se obtuvieron los espectros superficiales para dos de los conjuntos empleando un calculo de doble P-l. Los resultados del calculo concordaron con los datos correspondientes a la region termica para energias de hasta 0,2 eV. Ahora bien, al extender la gama de comparaciones a energias mas altas, el flujo de escape medido resulto superior en un 50% al calculado. En fecha mas reciente se obtuvieron valores del espectro superficial con menores desviaciones estadisticas que se emplearon en la comparacion con el calculo de otros espectros de esa indole. La tecnica de la medicion del espectro asintotico ha resultado un instrumento muy valioso para el estudio de los espectros que varian en funcion de la posicion de la fuente. En uno de los conjuntos, antes mencionados, se realizaron tambien mediciones del espectro en regimen estacionario con miras a comparar las dos tecnicas empleando el mismo espectrometro. El analisis de los resultados obtenidos no ha terminado aun. Como la densidad neutronica asintotica